File size: 12,136 Bytes
985c397 | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 | # SPDX-License-Identifier: LGPL-2.1-or-later
# ***************************************************************************
# * Copyright (c) 2022 sliptonic <shopinthewoods@gmail.com> *
# * Copyright (c) 2022 Larry Woestman <LarryWoestman2@gmail.com> *
# * Copyright (c) 2024 Carl Slater <CandLWorkshopllc@gmail.com> *
# * *
# * This program is free software; you can redistribute it and/or modify *
# * it under the terms of the GNU Lesser General Public License (LGPL) *
# * as published by the Free Software Foundation; either version 2 of *
# * the License, or (at your option) any later version. *
# * for detail see the LICENCE text file. *
# * *
# * This program is distributed in the hope that it will be useful, *
# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
# * GNU Library General Public License for more details. *
# * *
# * You should have received a copy of the GNU Library General Public *
# * License along with this program; if not, write to the Free Software *
# * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
# * USA *
# * *
# ***************************************************************************
# ***************************************************************************
# * Note: This file is a modified clone of TestRefactoredLinuxCNCPost.py *
# * any changes to this file should be applied to the other *
# * *
# * *
# ***************************************************************************
from importlib import reload
import FreeCAD
import Path
import CAMTests.PathTestUtils as PathTestUtils
from Path.Post.Processor import PostProcessorFactory
Path.Log.setLevel(Path.Log.Level.DEBUG, Path.Log.thisModule())
Path.Log.trackModule(Path.Log.thisModule())
class TestMassoG3Post(PathTestUtils.PathTestBase):
@classmethod
def setUpClass(cls):
"""setUpClass()...
This method is called upon instantiation of this test class. Add code
and objects here that are needed for the duration of the test() methods
in this class. In other words, set up the 'global' test environment
here; use the `setUp()` method to set up a 'local' test environment.
This method does not have access to the class `self` reference, but it
is able to call static methods within this same class.
"""
FreeCAD.ConfigSet("SuppressRecomputeRequiredDialog", "True")
cls.doc = FreeCAD.open(FreeCAD.getHomePath() + "/Mod/CAM/CAMTests/boxtest.fcstd")
cls.job = cls.doc.getObject("Job")
cls.post = PostProcessorFactory.get_post_processor(cls.job, "masso_g3")
# locate the operation named "Profile"
for op in cls.job.Operations.Group:
if op.Label == "Profile":
# remember the "Profile" operation
cls.profile_op = op
return
@classmethod
def tearDownClass(cls):
"""tearDownClass()...
This method is called prior to destruction of this test class. Add
code and objects here that cleanup the test environment after the
test() methods in this class have been executed. This method does not
have access to the class `self` reference. This method
is able to call static methods within this same class.
"""
FreeCAD.closeDocument(cls.doc.Name)
FreeCAD.ConfigSet("SuppressRecomputeRequiredDialog", "")
# Setup and tear down methods called before and after each unit test
def setUp(self):
"""setUp()...
This method is called prior to each `test()` method. Add code and
objects here that are needed for multiple `test()` methods.
"""
# allow a full length "diff" if an error occurs
self.maxDiff = None
# reinitialize the postprocessor data structures between tests
self.post.reinitialize()
def tearDown(self):
"""tearDown()...
This method is called after each test() method. Add cleanup instructions here.
Such cleanup instructions will likely undo those in the setUp() method.
"""
pass
def test000(self):
"""Test Output Generation.
Empty path. Produces only the preamble and postable.
"""
nl = "\n"
self.profile_op.Path = Path.Path([])
# Test generating with header
# Header contains a time stamp that messes up unit testing.
# Only test length of result.
self.job.PostProcessorArgs = "--no-show-editor"
gcode = self.post.export()[0][1]
self.assertTrue(len(gcode.splitlines()) == 26)
# Test without header
expected = """(Begin preamble)
G17 G54 G40 G49 G80 G90
G21
(Begin operation: Fixture)
(Machine units: mm/min)
G54
(Finish operation: Fixture)
(Begin operation: TC: Default Tool)
(Machine units: mm/min)
(TC: Default Tool)
(Begin toolchange)
M5
T1 M6
G43 H1
(Finish operation: TC: Default Tool)
(Begin operation: Profile)
(Machine units: mm/min)
(Finish operation: Profile)
(Begin postamble)
M05
G17 G54 G90 G80 G40
M2
"""
self.profile_op.Path = Path.Path([])
self.job.PostProcessorArgs = "--no-header --no-show-editor"
# args = ("--no-header --no-comments --no-show-editor --precision=2")
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
self.assertEqual(gcode, expected)
# test without comments
expected = """G17 G54 G40 G49 G80 G90
G21
G54
M5
T1 M6
G43 H1
M05
G17 G54 G90 G80 G40
M2
"""
self.job.PostProcessorArgs = "--no-header --no-comments --no-show-editor"
# args = ("--no-header --no-comments --no-show-editor --precision=2")
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
self.assertEqual(gcode, expected)
def test010(self):
"""Test command Generation.
Test Precision
"""
nl = "\n"
c = Path.Command("G0 X10 Y20 Z30")
self.profile_op.Path = Path.Path([c])
self.job.PostProcessorArgs = "--no-header --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[17]
expected = "G0 X10.000 Y20.000 Z30.000"
self.assertEqual(result, expected)
self.job.PostProcessorArgs = "--no-header --precision=2 --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[17]
expected = "G0 X10.00 Y20.00 Z30.00"
self.assertEqual(result, expected)
def test020(self):
"""
Test Line Numbers
"""
nl = "\n"
c = Path.Command("G0 X10 Y20 Z30")
self.profile_op.Path = Path.Path([c])
self.job.PostProcessorArgs = "--no-header --line-numbers --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[17]
expected = "N270 G0 X10.000 Y20.000 Z30.000"
self.assertEqual(result, expected)
def test030(self):
"""
Test Pre-amble
"""
nl = "\n"
self.profile_op.Path = Path.Path([])
self.job.PostProcessorArgs = (
"--no-header --no-comments --preamble='G18 G55' --no-show-editor"
)
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[0]
self.assertEqual(result, "G18 G55")
def test040(self):
"""
Test Post-amble
"""
nl = "\n"
self.profile_op.Path = Path.Path([])
self.job.PostProcessorArgs = (
"--no-header --no-comments --postamble='G0 Z50\nM2' --no-show-editor"
)
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[-2]
self.assertEqual(result, "G0 Z50")
self.assertEqual(gcode.splitlines()[-1], "M2")
def test050(self):
"""
Test inches
"""
nl = "\n"
c = Path.Command("G0 X10 Y20 Z30")
self.profile_op.Path = Path.Path([c])
self.job.PostProcessorArgs = "--no-header --inches --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
self.assertEqual(gcode.splitlines()[2], "G20")
result = gcode.splitlines()[17]
expected = "G0 X0.3937 Y0.7874 Z1.1811"
self.assertEqual(result, expected)
self.job.PostProcessorArgs = "--no-header --inches --precision=2 --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[17]
expected = "G0 X0.39 Y0.79 Z1.18"
self.assertEqual(result, expected)
def test060(self):
"""
Test test modal
Suppress the command name if the same as previous
"""
nl = "\n"
c = Path.Command("G0 X10 Y20 Z30")
c1 = Path.Command("G0 X10 Y30 Z30")
self.profile_op.Path = Path.Path([c, c1])
self.job.PostProcessorArgs = "--no-header --modal --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[18]
expected = "X10.000 Y30.000 Z30.000"
self.assertEqual(result, expected)
def test070(self):
"""
Test axis modal
Suppress the axis coordinate if the same as previous
"""
nl = "\n"
c = Path.Command("G0 X10 Y20 Z30")
c1 = Path.Command("G0 X10 Y30 Z30")
self.profile_op.Path = Path.Path([c, c1])
self.job.PostProcessorArgs = "--no-header --axis-modal --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[18]
expected = "G0 Y30.000"
self.assertEqual(result, expected)
def test080(self):
"""
Test tool change
"""
nl = "\n"
c = Path.Command("M6 T2")
c2 = Path.Command("M3 S3000")
self.profile_op.Path = Path.Path([c, c2])
self.job.PostProcessorArgs = "--no-header --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
self.assertEqual(gcode.splitlines()[18], "M5")
self.assertEqual(gcode.splitlines()[19], "T2 M6")
self.assertEqual(gcode.splitlines()[20], "G43 H2")
self.assertEqual(gcode.splitlines()[21], "M3 S3000")
# suppress TLO
self.job.PostProcessorArgs = "--no-header --no-tlo --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
self.assertEqual(gcode.splitlines()[19], "M3 S3000")
def test090(self):
"""
Test comment
"""
nl = "\n"
c = Path.Command("(comment)")
self.profile_op.Path = Path.Path([c])
self.job.PostProcessorArgs = "--no-header --no-show-editor"
gcode = self.post.export()[0][1]
# print(f"--------{nl}{gcode}--------{nl}")
result = gcode.splitlines()[17]
expected = "(comment)"
self.assertEqual(result, expected)
|