| | |
| |
|
| | from __future__ import annotations |
| |
|
| | from Base.Metadata import export |
| | from Part.App.ShapeFix.ShapeFix_Root import ShapeFix_Root |
| |
|
| | @export( |
| | PythonName="Part.ShapeFix.Wire", |
| | Twin="ShapeFix_Wire", |
| | TwinPointer="ShapeFix_Wire", |
| | Include="ShapeFix_Wire.hxx", |
| | FatherInclude="Mod/Part/App/ShapeFix/ShapeFix_RootPy.h", |
| | Constructor=True, |
| | ) |
| | class ShapeFix_Wire(ShapeFix_Root): |
| | """ |
| | Class for fixing operations on wires |
| | |
| | Author: Werner Mayer (wmayer@users.sourceforge.net) |
| | Licence: LGPL |
| | """ |
| |
|
| | def init(self) -> None: |
| | """ |
| | Initializes by wire, face, precision |
| | """ |
| | pass |
| |
|
| | def fixEdgeTool(self) -> None: |
| | """ |
| | Returns tool for fixing wires |
| | """ |
| | pass |
| |
|
| | def clearModes(self) -> None: |
| | """ |
| | Sets all modes to default |
| | """ |
| | pass |
| |
|
| | def clearStatuses(self) -> None: |
| | """ |
| | Clears all statuses |
| | """ |
| | pass |
| |
|
| | def load(self) -> None: |
| | """ |
| | Load data for the wire, and drops all fixing statuses |
| | """ |
| | pass |
| |
|
| | def setFace(self) -> None: |
| | """ |
| | Set working face for the wire |
| | """ |
| | pass |
| |
|
| | def setSurface(self, surface: object, Placement: object = ..., /) -> None: |
| | """ |
| | setSurface(surface, [Placement]) |
| | Set surface for the wire |
| | """ |
| | pass |
| |
|
| | def setMaxTailAngle(self) -> None: |
| | """ |
| | Sets the maximal allowed angle of the tails in radians |
| | """ |
| | pass |
| |
|
| | def setMaxTailWidth(self) -> None: |
| | """ |
| | Sets the maximal allowed width of the tails |
| | """ |
| | pass |
| |
|
| | def isLoaded(self) -> None: |
| | """ |
| | Tells if the wire is loaded |
| | """ |
| | pass |
| |
|
| | def isReady(self) -> None: |
| | """ |
| | Tells if the wire and face are loaded |
| | """ |
| | pass |
| |
|
| | def numberOfEdges(self) -> None: |
| | """ |
| | Returns number of edges in the working wire |
| | """ |
| | pass |
| |
|
| | def wire(self) -> None: |
| | """ |
| | Makes the resulting Wire (by basic Brep_Builder) |
| | """ |
| | pass |
| |
|
| | def wireAPIMake(self) -> None: |
| | """ |
| | Makes the resulting Wire (by BRepAPI_MakeWire) |
| | """ |
| | pass |
| |
|
| | def face(self) -> None: |
| | """ |
| | Returns working face |
| | """ |
| | pass |
| |
|
| | def perform(self) -> None: |
| | """ |
| | Iterates on subshapes and performs fixes |
| | """ |
| | pass |
| |
|
| | def fixReorder(self) -> None: |
| | """ |
| | Performs an analysis and reorders edges in the wire |
| | """ |
| | pass |
| |
|
| | def fixSmall(self) -> None: |
| | """ |
| | Applies fixSmall(...) to all edges in the wire |
| | """ |
| | pass |
| |
|
| | def fixConnected(self, num: int, /) -> None: |
| | """ |
| | Applies fixConnected(num) to all edges in the wire |
| | Connection between first and last edges is treated only if |
| | flag ClosedMode is True |
| | If prec is -1 then maxTolerance() is taken. |
| | """ |
| | pass |
| |
|
| | def fixEdgeCurves(self) -> None: |
| | """ |
| | Groups the fixes dealing with 3d and pcurves of the edges |
| | """ |
| | pass |
| |
|
| | def fixDegenerated(self) -> None: |
| | """ |
| | Applies fixDegenerated(...) to all edges in the wire |
| | """ |
| | pass |
| |
|
| | def fixSelfIntersection(self) -> None: |
| | """ |
| | Applies FixSelfIntersectingEdge(num) and |
| | FixIntersectingEdges(num) to all edges in the wire and |
| | FixIntersectingEdges(num1, num2) for all pairs num1 and num2 |
| | and removes wrong edges if any |
| | """ |
| | pass |
| |
|
| | def fixLacking(self) -> None: |
| | """ |
| | Applies FixLacking(num) to all edges in the wire |
| | Connection between first and last edges is treated only if |
| | flag ClosedMode is True |
| | If 'force' is False (default), test for connectness is done with |
| | precision of vertex between edges, else it is done with minimal |
| | value of vertex tolerance and Analyzer.Precision(). |
| | Hence, 'force' will lead to inserting lacking edges in replacement |
| | of vertices which have big tolerances. |
| | """ |
| | pass |
| |
|
| | def fixClosed(self) -> None: |
| | """ |
| | Fixes a wire to be well closed |
| | """ |
| | pass |
| |
|
| | def fixGaps3d(self, num: int, /) -> None: |
| | """ |
| | Fixes gaps between ends of 3d curves on adjacent edges |
| | """ |
| | pass |
| |
|
| | def fixGaps2d(self, num: int, /) -> None: |
| | """ |
| | Fixes gaps between ends of pcurves on adjacent edges |
| | """ |
| | pass |
| |
|
| | def fixSeam(self) -> None: |
| | """ |
| | Fixes seam edges |
| | """ |
| | pass |
| |
|
| | def fixShifted(self) -> None: |
| | """ |
| | Fixes edges which have pcurves shifted by whole parameter |
| | range on the closed surface |
| | """ |
| | pass |
| |
|
| | def fixNotchedEdges(self) -> None: |
| | """ |
| | Fixes Notch edges.Check if there are notch edges in 2d and fix it |
| | """ |
| | pass |
| |
|
| | def fixGap3d(self, num: int, /) -> None: |
| | """ |
| | Fixes gap between ends of 3d curves on num-1 and num-th edges |
| | """ |
| | pass |
| |
|
| | def fixGap2d(self, num: int, /) -> None: |
| | """ |
| | Fixes gap between ends of pcurves on num-1 and num-th edges |
| | """ |
| | pass |
| |
|
| | def fixTails(self) -> None: |
| | """ |
| | Fixes issues related to 'tails' in the geometry. |
| | Tails are typically small, undesired protrusions or deviations in the curves or edges that need correction. |
| | This method examines the geometry and applies corrective actions to eliminate or reduce the presence of tails. |
| | """ |
| | pass |
| | ModifyTopologyMode: bool = ... |
| | """Mode for modifying topology of the wire""" |
| |
|
| | ModifyGeometryMode: bool = ... |
| | """Mode for modifying geometry of vertexes and edges""" |
| |
|
| | ModifyRemoveLoopMode: bool = ... |
| | """Mode for modifying edges""" |
| |
|
| | ClosedWireMode: bool = ... |
| | """ |
| | Mode which defines whether the wire |
| | is to be closed (by calling methods like fixDegenerated() |
| | and fixConnected() for last and first edges) |
| | """ |
| |
|
| | PreferencePCurveMode: bool = ... |
| | """ |
| | Mode which defines whether the 2d 'True' |
| | representation of the wire is preferable over 3d one in the |
| | case of ambiguity in FixEdgeCurves |
| | """ |
| |
|
| | FixGapsByRangesMode: bool = ... |
| | """ |
| | Mode which defines whether tool |
| | tries to fix gaps first by changing curves ranges (i.e. |
| | using intersection, extrema, projections) or not |
| | """ |
| |
|
| | FixReorderMode: bool = ... |
| | """ |
| | Mode which performs an analysis and reorders edges in the wire using class WireOrder. |
| | Flag 'theModeBoth' determines the use of miscible mode if necessary. |
| | """ |
| |
|
| | FixSmallMode: bool = ... |
| | """Mode which applies FixSmall(num) to all edges in the wire""" |
| |
|
| | FixConnectedMode: bool = ... |
| | """ |
| | Mode which applies FixConnected(num) to all edges in the wire |
| | Connection between first and last edges is treated only if |
| | flag ClosedMode is True |
| | If 'prec' is -1 then MaxTolerance() is taken. |
| | """ |
| |
|
| | FixEdgeCurvesMode: bool = ... |
| | """ |
| | Mode which groups the fixes dealing with 3d and pcurves of the edges. |
| | The order of the fixes and the default behaviour are: |
| | ShapeFix_Edge::FixReversed2d |
| | ShapeFix_Edge::FixRemovePCurve (only if forced) |
| | ShapeFix_Edge::FixAddPCurve |
| | ShapeFix_Edge::FixRemoveCurve3d (only if forced) |
| | ShapeFix_Edge::FixAddCurve3d |
| | FixSeam, |
| | FixShifted, |
| | ShapeFix_Edge::FixSameParameter |
| | """ |
| |
|
| | FixDegeneratedMode: bool = ... |
| | """ |
| | Mode which applies FixDegenerated(num) to all edges in the wire |
| | Connection between first and last edges is treated only if |
| | flag ClosedMode is True |
| | """ |
| |
|
| | FixSelfIntersectionMode: bool = ... |
| | """ |
| | Mode which applies FixSelfIntersectingEdge(num) and |
| | FixIntersectingEdges(num) to all edges in the wire and |
| | FixIntersectingEdges(num1, num2) for all pairs num1 and num2 |
| | and removes wrong edges if any |
| | """ |
| |
|
| | FixLackingMode: bool = ... |
| | """ |
| | Mode which applies FixLacking(num) to all edges in the wire |
| | Connection between first and last edges is treated only if |
| | flag ClosedMode is True |
| | If 'force' is False (default), test for connectness is done with |
| | precision of vertex between edges, else it is done with minimal |
| | value of vertex tolerance and Analyzer.Precision(). |
| | Hence, 'force' will lead to inserting lacking edges in replacement |
| | of vertices which have big tolerances. |
| | """ |
| |
|
| | FixGaps3dMode: bool = ... |
| | """ |
| | Mode which fixes gaps between ends of 3d curves on adjacent edges |
| | myPrecision is used to detect the gaps. |
| | """ |
| |
|
| | FixGaps2dMode: bool = ... |
| | """ |
| | Mode whixh fixes gaps between ends of pcurves on adjacent edges |
| | myPrecision is used to detect the gaps. |
| | """ |
| |
|
| | FixReversed2dMode: bool = ... |
| | """Mode which fixes the reversed in 2d""" |
| |
|
| | FixRemovePCurveMode: bool = ... |
| | """Mode which removePCurve in 2d""" |
| |
|
| | FixAddPCurveMode: bool = ... |
| | """Mode which fixes addCurve in 2d""" |
| |
|
| | FixRemoveCurve3dMode: bool = ... |
| | """Mode which fixes removeCurve in 3d """ |
| |
|
| | FixAddCurve3dMode: bool = ... |
| | """Mode which fixes addCurve in 3d""" |
| |
|
| | FixSeamMode: bool = ... |
| | """Mode which fixes Seam """ |
| |
|
| | FixShiftedMode: bool = ... |
| | """Mode which fixes Shifted""" |
| |
|
| | FixSameParameterMode: bool = ... |
| | """Mode which fixes sameParameter in 2d""" |
| |
|
| | FixVertexToleranceMode: bool = ... |
| | """Mode which fixes VertexTolerence in 2d""" |
| |
|
| | FixNotchedEdgesMode: bool = ... |
| | """Mode which fixes NotchedEdges in 2d""" |
| |
|
| | FixSelfIntersectingEdgeMode: bool = ... |
| | """Mode which fixes SelfIntersectionEdge in 2d""" |
| |
|
| | FixIntersectingEdgesMode: bool = ... |
| | """Mode which fixes IntersectingEdges in 2d""" |
| |
|
| | FixNonAdjacentIntersectingEdgesMode: bool = ... |
| | """Mode which fixes NonAdjacentIntersectingEdges in 2d""" |
| |
|
| | FixTailMode: bool = ... |
| | """Mode which fixes Tails in 2d""" |
| |
|
