# SPDX-License-Identifier: LGPL-2.1-or-later # *************************************************************************** # * * # * Copyright (c) 2017 Yorik van Havre * # * * # * This file is part of FreeCAD. * # * * # * FreeCAD is free software: you can redistribute it and/or modify it * # * under the terms of the GNU Lesser General Public License as * # * published by the Free Software Foundation, either version 2.1 of the * # * License, or (at your option) any later version. * # * * # * FreeCAD is distributed in the hope that it will be useful, but * # * WITHOUT ANY WARRANTY; without even the implied warranty of * # * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * # * Lesser General Public License for more details. * # * * # * You should have received a copy of the GNU Lesser General Public * # * License along with FreeCAD. If not, see * # * . * # * * # *************************************************************************** import math from datetime import datetime import FreeCAD import DraftGeomUtils import DraftVecUtils import Part import WorkingPlane # This is roughly based on the no-fit polygon algorithm, used in # SvgNest: https://github.com/Jack000/SVGnest # Wikihouse plugin: https://github.com/tav/wikihouse-plugin/blob/master/wikihouse.rb TOLERANCE = 0.0001 # smaller than this, two points are considered equal DISCRETIZE = 4 # the number of segments in which arcs must be subdivided ROTATIONS = [0, 90, 180, 270] # the possible rotations to try class Nester: def __init__(self, container=None, shapes=None): """Nester([container,shapes]): Creates a nester object with a container shape and a list of other shapes to nest into it. Container and shapes must be Part.Faces. Typical workflow: n = Nester() # creates the nester n.addContainer(object) # adds a doc object as the container n.addObjects(objects) # adds a list of doc objects as shapes n.run() # runs the nesting n.show() # creates a preview (compound) of the results n.apply() # applies transformations to the original objects Defaults (can be changed): Nester.TOLERANCE = 0.0001 Nester.DISCRETIZE = 4 Nester.ROTATIONS = [0,90,180,270] """ self.objects = None self.container = container self.shapes = shapes self.results = [] # storage for the different results self.indexedFaces = None self.running = True self.progress = 0 self.setCounter = None # optionally define a setCounter(value) function where value is a % def addObjects(self, objects): """addObjects(objects): adds FreeCAD DocumentObjects to the nester""" if not isinstance(objects, list): objects = [objects] if not self.objects: self.objects = {} if not self.shapes: self.shapes = [] for obj in objects: if hasattr(obj, "Shape"): h = obj.Shape.hashCode() if not h in self.objects: self.objects[h] = obj self.shapes.append(obj.Shape) def addContainer(self, container): """addContainer(object): adds a FreeCAD DocumentObject as the container""" if hasattr(container, "Shape"): self.container = container.Shape def clear(self): """clear(): Removes all objects and shape from the nester""" self.objects = None self.shapes = None def stop(self): """stop((): stops the computation""" self.running = False def update(self): """update(): internal function to verify if computation can go on""" if self.setCounter: self.setCounter(self.progress) if FreeCAD.GuiUp: from PySide import QtGui QtGui.QApplication.processEvents() if not self.running: return False return True def run(self): """run(): Runs a nesting operation. Returns a list of lists of shapes, each primary list being one filled container, or None if the operation failed.""" # reset abort mechanism and variables self.running = True self.progress = 0 starttime = datetime.now() # general conformity tests print("Executing conformity tests… ", end="") if not self.container: print("Empty container. Aborting.") return if not self.shapes: print("Empty shapes. Aborting.") return if not isinstance(self.container, Part.Face): print("Container is not a face. Aborting.") return normal = self.container.normalAt(0, 0) for s in self.shapes: if not self.update(): return if len(s.Faces) != 1: print("One of the shapes does not contain exactly one face. Aborting.") return # check if all faces correctly oriented (same normal) if s.Faces[0].normalAt(0, 0).getAngle(normal) > TOLERANCE: # let pass faces with inverted normal if s.Faces[0].normalAt(0, 0).getAngle(normal) - math.pi > TOLERANCE: print( "One of the face does not have the same orientation as the container. Aborting." ) return # TODO # allow one to use a non-rectangular container # manage margins/paddings # allow one to prevent or force specific rotations for a piece # LONG-TERM TODO # add genetic algo to swap pieces, and check if the result is better # track progresses step = 100.0 / (len(self.shapes) * len(ROTATIONS)) # store hashCode together with the face so we can change the order # and still identify the original face, so we can calculate a transform afterwards self.indexedfaces = [[shape.hashCode(), shape] for shape in self.shapes] # build a clean copy so we don't touch the original faces = list(self.indexedfaces) # replace shapes by their face faces = [[f[0], f[1].Faces[0]] for f in faces] # order by area faces = sorted(faces, key=lambda face: face[1].Area) # discretize non-linear edges and remove holes nfaces = [] for face in faces: if not self.update(): return nedges = [] allLines = True for edge in face[1].OuterWire.OrderedEdges: if isinstance(edge.Curve, (Part.LineSegment, Part.Line)): nedges.append(edge) else: allLines = False last = edge.Vertexes[0].Point for i in range(DISCRETIZE): s = float(i + 1) / DISCRETIZE par = edge.FirstParameter + (edge.LastParameter - edge.FirstParameter) * s new = edge.valueAt(par) nedges.append(Part.LineSegment(last, new).toShape()) last = new f = Part.Face(Part.Wire(nedges)) if not f.isValid(): if allLines: print("Invalid face found in set. Aborting.") else: print("Face distretizing failed. Aborting.") return nfaces.append([face[0], f]) faces = nfaces # container for sheets with a first, empty sheet sheets = [[]] print("Everything OK (", datetime.now() - starttime, ")") # main loop facenumber = 1 facesnumber = len(faces) # print("Vertices per face:",[len(face[1].Vertexes) for face in faces]) while faces: print( "Placing piece", facenumber, "/", facesnumber, "Area:", FreeCAD.Units.Quantity(faces[-1][1].Area, FreeCAD.Units.Area).getUserPreferred()[0], ": ", end="", ) face = faces.pop() boc = self.container.BoundBox # this stores the available solutions for each rotation of a piece # contains [sheetnumber,face,xlength] lists, # face being [hascode,transformed face] and xlength # the X size of all boundboxes of placed pieces available = [] # this stores the possible positions on a blank # sheet, in case we need to create a new one initials = [] # this checks if the piece don't fit in the container unfit = True for rotation in ROTATIONS: if not self.update(): return self.progress += step print(rotation, ", ", end="") hashcode = face[0] rotface = face[1].copy() if rotation: rotface.rotate(rotface.CenterOfMass, normal, rotation) bof = rotface.BoundBox rotverts = self.order(rotface) # for i,v in enumerate(rotverts): # Draft.makeText([str(i)],point=v) basepoint = rotverts[0] # leftmost point of the rotated face basecorner = boc.getPoint(0) # lower left corner of the container # See if the piece fits in the container dimensions if (bof.XLength < boc.XLength) and (bof.YLength < boc.YLength): unfit = False # Get the fit polygon of the container # that is, the polygon inside which basepoint can # circulate, and the face still be fully inside the container v1 = basecorner.add(basepoint.sub(bof.getPoint(0))) v2 = v1.add(FreeCAD.Vector(0, boc.YLength - bof.YLength, 0)) v3 = v2.add(FreeCAD.Vector(boc.XLength - bof.XLength, 0, 0)) v4 = v3.add(FreeCAD.Vector(0, -(boc.YLength - bof.YLength), 0)) binpol = Part.Face(Part.makePolygon([v1, v2, v3, v4, v1])) initials.append([binpol, [hashcode, rotface], basepoint]) # check for available space on each existing sheet for sheetnumber, sheet in enumerate(sheets): # Get the no-fit polygon for each already placed face in # current sheet. That is, a polygon in which basepoint # cannot be, if we want our face to not overlap with the # placed face. # To do this, we "circulate" the face around the placed face if not self.update(): return nofitpol = [] for placed in sheet: pts = [] for placedvert in self.order(placed[1], right=True): fpts = [] for i, rotvert in enumerate(rotverts): if not self.update(): return facecopy = rotface.copy() facecopy.translate(placedvert.sub(rotvert)) # test if all the points of the face are outside the # placed face (except the base point, which is coincident) outside = True faceverts = self.order(facecopy) for vert in faceverts: if (vert.sub(placedvert)).Length > TOLERANCE: if placed[1].isInside(vert, TOLERANCE, True): outside = False break # also need to test for edge intersection, because even # if all vertices are outside, the pieces could still # overlap if outside: for e1 in facecopy.OuterWire.Edges: for e2 in placed[1].OuterWire.Edges: if not self.update(): return if True: # Draft code (SLOW) p = DraftGeomUtils.findIntersection(e1, e2) if p: p = p[0] p1 = e1.Vertexes[0].Point p2 = e1.Vertexes[1].Point p3 = e2.Vertexes[0].Point p4 = e2.Vertexes[1].Point if ( (p.sub(p1).Length > TOLERANCE) and (p.sub(p2).Length > TOLERANCE) and (p.sub(p3).Length > TOLERANCE) and (p.sub(p4).Length > TOLERANCE) ): outside = False break else: # alt code: using distToShape (EVEN SLOWER!) p = e1.distToShape(e2) if p: if p[0] < TOLERANCE: # allow vertex-to-vertex intersection if (p[2][0][0] != "Vertex") or ( p[2][0][3] != "Vertex" ): outside = False break if outside: fpts.append([faceverts[0], i]) # Draft.makeText([str(i)],point=faceverts[0]) # reorder available solutions around a same point if needed # ensure they are in the correct order idxs = [p[1] for p in fpts] if (0 in idxs) and (len(faceverts) - 1 in idxs): slicepoint = len(fpts) last = len(faceverts) for p in reversed(fpts): if p[1] == last - 1: slicepoint -= 1 last -= 1 else: break fpts = fpts[slicepoint:] + fpts[:slicepoint] # print(fpts) pts.extend(fpts) # create the polygon if len(pts) < 3: print("Error calculating a no-fit polygon. Aborting.") return pts = [p[0] for p in pts] pol = Part.Face(Part.makePolygon(pts + [pts[0]])) if not pol.isValid(): # fix overlapping edges overlap = True while overlap: overlap = False for i in range(len(pol.OuterWire.Edges) - 1): if not self.update(): return v1 = DraftGeomUtils.vec(pol.OuterWire.OrderedEdges[i]) v2 = DraftGeomUtils.vec(pol.OuterWire.OrderedEdges[i + 1]) if abs(v1.getAngle(v2) - math.pi) <= TOLERANCE: overlap = True ne = Part.LineSegment( pol.OuterWire.OrderedEdges[i].Vertexes[0].Point, pol.OuterWire.OrderedEdges[i + 1].Vertexes[-1].Point, ).toShape() pol = Part.Face( Part.Wire( pol.OuterWire.OrderedEdges[:i] + [ne] + pol.OuterWire.OrderedEdges[i + 2 :] ) ) break if not pol.isValid(): # trying basic OCC fix pol.fix(0, 0, 0) if pol.isValid(): if pol.ShapeType == "Face": pol = Part.Face(pol.OuterWire) # discard possible inner holes elif pol.Faces: # several faces after the fix, keep the biggest one a = 0 ff = None for f in pol.Faces: if f.Area > a: a = f.Area ff = f if ff: pol = ff else: print("Unable to fix invalid no-fit polygon. Aborting.") Part.show(pol) return if not pol.isValid(): # none of the fixes worked. Epic fail. print("Invalid no-fit polygon. Aborting.") Part.show(pol.OuterWire) for p in sheet: Part.show(p[1]) Part.show(facecopy) # for i,p in enumerate(faceverts): # Draft.makeText([str(i)],point=p) return if pol.isValid(): nofitpol.append(pol) # Part.show(pol) # Union all the no-fit pols into one if len(nofitpol) == 1: nofitpol = nofitpol[0] elif len(nofitpol) > 1: b = nofitpol.pop() for n in nofitpol: if not self.update(): return b = b.fuse(n) nofitpol = b # remove internal edges (discard edges shared by 2 faces) lut = {} for f in fitpol.Faces: for e in f.Edges: h = e.hashCode() if h in lut: lut[h].append(e) else: lut[h] = [e] edges = [e[0] for e in lut.values() if len(e) == 1] try: pol = Part.Face(Part.Wire(edges)) except Exception: # above method can fail sometimes. Try a slower method w = DraftGeomUtils.findWires(edges) if len(w) == 1: if w[0].isClosed(): try: pol = Part.Face(w[0]) except Exception: print("Error merging polygons. Aborting.") try: Part.show(Part.Wire(edges)) except Exception: for e in edges: Part.show(e) return # subtract the no-fit polygon from the container's fit polygon # we then have the zone where the face can be placed if nofitpol: fitpol = binpol.cut(nofitpol) else: fitpol = binpol.copy() # check that we have some space on this sheet if (fitpol.Area > 0) and fitpol.Vertexes: # order the fitpol vertexes by smallest X # and try to place the piece, making sure it doesn't # intersect with already placed pieces fitverts = sorted([v.Point for v in fitpol.Vertexes], key=lambda v: v.x) for p in fitverts: if not self.update(): return trface = rotface.copy() trface.translate(p.sub(basepoint)) ok = True for placed in sheet: if ok: for vert in trface.Vertexes: if placed[1].isInside(vert.Point, TOLERANCE, False): ok = False break if ok: for e1 in trface.OuterWire.Edges: for e2 in placed[1].OuterWire.Edges: p = DraftGeomUtils.findIntersection(e1, e2) if p: p = p[0] p1 = e1.Vertexes[0].Point p2 = e1.Vertexes[1].Point p3 = e2.Vertexes[0].Point p4 = e2.Vertexes[1].Point if ( (p.sub(p1).Length > TOLERANCE) and (p.sub(p2).Length > TOLERANCE) and (p.sub(p3).Length > TOLERANCE) and (p.sub(p4).Length > TOLERANCE) ): ok = False break if not ok: break if ok: rotface = trface break else: print("Could not determine location on sheet. Aborting.") return # check the X space occupied by this solution bb = rotface.BoundBox for placed in sheet: bb.add(placed[1].BoundBox) available.append([sheetnumber, [hashcode, rotface], bb.XMax, fitpol]) if unfit: print("One face does not fit in the container. Aborting.") return if available: # order by smallest X size and take the first one available = sorted(available, key=lambda sol: sol[2]) print("Adding piece to sheet", available[0][0] + 1) sheets[available[0][0]].append(available[0][1]) # Part.show(available[0][3]) else: # adding to the leftmost vertex of the binpol sheet = [] print("Creating new sheet, adding piece to sheet", len(sheets)) # order initial positions by smallest X size initials = sorted(initials, key=lambda sol: sol[1][1].BoundBox.XLength) hashcode = initials[0][1][0] face = initials[0][1][1] # order binpol vertexes by X coord verts = sorted([v.Point for v in initials[0][0].Vertexes], key=lambda v: v.x) face.translate(verts[0].sub(initials[0][2])) sheet.append([hashcode, face]) sheets.append(sheet) facenumber += 1 print("Run time:", datetime.now() - starttime) self.results.append(sheets) return sheets def order(self, face, right=False): """order(face,[right]): returns a list of vertices ordered clockwise. The first vertex will be the lefmost one, unless right is True, in which case the first vertex will be the rightmost one""" verts = [v.Point for v in face.OuterWire.OrderedVertexes] # flatten the polygon on the XY plane wp = WorkingPlane.PlaneBase() wp.align_to_point_and_axis(face.CenterOfMass, face.normalAt(0, 0)) pverts = [] for v in verts: vx = DraftVecUtils.project(v, wp.u) lx = vx.Length if vx.getAngle(wp.u) > 1: lx = -lx vy = DraftVecUtils.project(v, wp.v) ly = vy.Length if vy.getAngle(wp.v) > 1: ly = -ly pverts.append(FreeCAD.Vector(lx, ly, 0)) pverts.append(pverts[0]) # https://stackoverflow.com/questions/1165647/how-to-determine-if-a-list-of-polygon-points-are-in-clockwise-order s = 0 for i in range(len(pverts) - 1): s += (pverts[i + 1].x - pverts[i].x) * (pverts[i + 1].y + pverts[i].y) if s < 0: verts.reverse() elif s == 0: print("error computing winding direction") return return verts def show(self, result=None): """show([result]): creates shapes in the document, showing the given result (list of sheets) or the last result if none is provided""" if not result: result = [] if self.results: result = self.results[-1] offset = FreeCAD.Vector(0, 0, 0) feats = [] for sheet in result: shapes = [self.container.OuterWire] shapes.extend([face[1] for face in sheet]) comp = Part.makeCompound(shapes) comp.translate(offset) o = FreeCAD.ActiveDocument.addObject("Part::Feature", "Nest") o.Shape = comp feats.append(o) offset = offset.add(FreeCAD.Vector(1.1 * self.container.BoundBox.XLength, 0, 0)) FreeCAD.ActiveDocument.recompute() return feats def getPlacements(self, result=None): """getPlacements([result]): returns a dictionary of hashCode:Placement pairs from the given result or the last computed result if none is given. The Placement contains a translation vector and a rotation to be given to the final object.""" if not self.indexedfaces: print("error: shapes were not indexed. Use run() first") return if not result: result = [] if self.results: result = self.results[-1] d = {} offset = FreeCAD.Vector(0, 0, 0) for sheet in result: for face in sheet: orig = None for pair in self.indexedfaces: if pair[0] == face[0]: orig = pair[1] if not orig: print("error: hashCode mismatch between original and transformed face") return shape = face[1] if offset.Length: shape.translate(offset) deltav = shape.Faces[0].CenterOfMass.sub(orig.Faces[0].CenterOfMass) rot = FreeCAD.Rotation( orig.Vertexes[0].Point.sub(orig.Faces[0].CenterOfMass), shape.Vertexes[0].Point.sub(shape.Faces[0].CenterOfMass), ) pla = FreeCAD.Placement(deltav, rot) d[face[0]] = pla offset = offset.add(FreeCAD.Vector(1.1 * self.container.BoundBox.XLength, 0, 0)) return d def apply(self, result=None): """apply([result]): Applies the computed placements of the given result, or the last computed result if none is given, to the document objects given to the nester via addObjects() before running.""" if not self.objects: print("objects list is empty") return p = self.getPlacements(result) if p: for key, pla in p.items(): if key in self.objects: sh = self.objects[key].Shape.copy() sh.translate(pla.Base) sh.rotate( sh.Faces[0].CenterOfMass, pla.Rotation.Axis, math.degrees(pla.Rotation.Angle), ) self.objects[key].Placement = sh.Placement else: print("error: hashCode mismatch with original object") def test(): "runs a test with selected shapes, container selected last" import FreeCADGui sel = FreeCADGui.Selection.getSelection() if sel: container = sel.pop().Shape shapes = [o.Shape for o in sel] n = Nester(container, shapes) result = n.run() if result: n.show()