/******************************************************************************
** libDXFrw - Library to read/write DXF files (ascii & binary) **
** **
** Copyright (C) 2011-2015 José F. Soriano, rallazz@gmail.com **
** **
** This library is free software, licensed under the terms of the GNU **
** General Public License as published by the Free Software Foundation, **
** either version 2 of the License, or (at your option) any later version. **
** You should have received a copy of the GNU General Public License **
** along with this program. If not, see . **
******************************************************************************/
#include "dwgbuffer.h"
#include "../libdwgr.h"
#include "drw_textcodec.h"
#include "drw_dbg.h"
//#include
/*#include
#include
#include
#include "dwgreader.h"*/
//#include "dxfwriter.h"
//#define FIRSTHANDLE 48
/*enum sections {
secUnknown,
secHeader,
secTables,
secBlocks,
secEntities,
secObjects
};*/
static unsigned int crctable[256]= {
0x0000,0xC0C1,0xC181,0x0140,0xC301,0x03C0,0x0280,0xC241,
0xC601,0x06C0,0x0780,0xC741,0x0500,0xC5C1,0xC481,0x0440,
0xCC01,0x0CC0,0x0D80,0xCD41,0x0F00,0xCFC1,0xCE81,0x0E40,
0x0A00,0xCAC1,0xCB81,0x0B40,0xC901,0x09C0,0x0880,0xC841,
0xD801,0x18C0,0x1980,0xD941,0x1B00,0xDBC1,0xDA81,0x1A40,
0x1E00,0xDEC1,0xDF81,0x1F40,0xDD01,0x1DC0,0x1C80,0xDC41,
0x1400,0xD4C1,0xD581,0x1540,0xD701,0x17C0,0x1680,0xD641,
0xD201,0x12C0,0x1380,0xD341,0x1100,0xD1C1,0xD081,0x1040,
0xF001,0x30C0,0x3180,0xF141,0x3300,0xF3C1,0xF281,0x3240,
0x3600,0xF6C1,0xF781,0x3740,0xF501,0x35C0,0x3480,0xF441,
0x3C00,0xFCC1,0xFD81,0x3D40,0xFF01,0x3FC0,0x3E80,0xFE41,
0xFA01,0x3AC0,0x3B80,0xFB41,0x3900,0xF9C1,0xF881,0x3840,
0x2800,0xE8C1,0xE981,0x2940,0xEB01,0x2BC0,0x2A80,0xEA41,
0xEE01,0x2EC0,0x2F80,0xEF41,0x2D00,0xEDC1,0xEC81,0x2C40,
0xE401,0x24C0,0x2580,0xE541,0x2700,0xE7C1,0xE681,0x2640,
0x2200,0xE2C1,0xE381,0x2340,0xE101,0x21C0,0x2080,0xE041,
0xA001,0x60C0,0x6180,0xA141,0x6300,0xA3C1,0xA281,0x6240,
0x6600,0xA6C1,0xA781,0x6740,0xA501,0x65C0,0x6480,0xA441,
0x6C00,0xACC1,0xAD81,0x6D40,0xAF01,0x6FC0,0x6E80,0xAE41,
0xAA01,0x6AC0,0x6B80,0xAB41,0x6900,0xA9C1,0xA881,0x6840,
0x7800,0xB8C1,0xB981,0x7940,0xBB01,0x7BC0,0x7A80,0xBA41,
0xBE01,0x7EC0,0x7F80,0xBF41,0x7D00,0xBDC1,0xBC81,0x7C40,
0xB401,0x74C0,0x7580,0xB541,0x7700,0xB7C1,0xB681,0x7640,
0x7200,0xB2C1,0xB381,0x7340,0xB101,0x71C0,0x7080,0xB041,
0x5000,0x90C1,0x9181,0x5140,0x9301,0x53C0,0x5280,0x9241,
0x9601,0x56C0,0x5780,0x9741,0x5500,0x95C1,0x9481,0x5440,
0x9C01,0x5CC0,0x5D80,0x9D41,0x5F00,0x9FC1,0x9E81,0x5E40,
0x5A00,0x9AC1,0x9B81,0x5B40,0x9901,0x59C0,0x5880,0x9841,
0x8801,0x48C0,0x4980,0x8941,0x4B00,0x8BC1,0x8A81,0x4A40,
0x4E00,0x8EC1,0x8F81,0x4F40,0x8D01,0x4DC0,0x4C80,0x8C41,
0x4400,0x84C1,0x8581,0x4540,0x8701,0x47C0,0x4680,0x8641,
0x8201,0x42C0,0x4380,0x8341,0x4100,0x81C1,0x8081,0x4040 };
static unsigned int crc32Table[256] ={
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d};
union typeCast {
char buf[8];
duint16 i16;
duint32 i32;
duint64 i64;
ddouble64 d64;
};
bool dwgFileStream::setPos(duint64 p){
if (p >= sz)
return false;
stream->seekg(p);
return stream->good();
}
bool dwgFileStream::read(duint8* s, duint64 n){
stream->read (reinterpret_cast(s),n);
return stream->good();
}
bool dwgCharStream::setPos(duint64 p){
if (p > size()) {
isOk = false;
return false;
}
pos = p;
return true;
}
bool dwgCharStream::read(duint8* s, duint64 n){
if ( n > (sz - pos) ) {
isOk = false;
return false;
}
for (duint64 i=0; isize()}
{}
dwgBuffer::dwgBuffer( const dwgBuffer& org )
:decoder{org.decoder}
,filestr{org.filestr->clone()}
,maxSize{filestr->size()}
,currByte{org.currByte}
,bitPos{org.bitPos}
{}
dwgBuffer& dwgBuffer::operator=( const dwgBuffer& org ){
filestr.reset( org.filestr->clone());
decoder = org.decoder;
maxSize = filestr->size();
currByte = org.currByte;
bitPos = org.bitPos;
return *this;
}
/**Gets the current byte position in buffer **/
duint64 dwgBuffer::getPosition() const{
if (bitPos != 0)
return filestr->getPos() -1;
return filestr->getPos();
}
/**Sets the buffer position in pos byte, reset the bit position **/
bool dwgBuffer::setPosition(duint64 pos){
bitPos = 0;
/* if (pos>=maxSize)
return false;*/
return filestr->setPos(pos);
// return true;
}
//RLZ: Fails if ... ???
void dwgBuffer::setBitPos(duint8 pos){
if (pos>7)
return;
if (pos != 0 && bitPos == 0){
duint8 buffer;
filestr->read (&buffer,1);
currByte = buffer;
}
if (pos == 0 && bitPos != 0){//reset current byte
filestr->setPos(filestr->getPos()-1);
}
bitPos = pos;
}
bool dwgBuffer::moveBitPos(dint32 size){
if (size == 0) return true;
dint32 b= size + bitPos;
filestr->setPos(getPosition() + (b >> 3) );
bitPos = b & 7;
if (bitPos != 0){
filestr->read (&currByte,1);
}
return filestr->good();
}
/**Reads one Bit returns a char with value 0/1 (B) **/
duint8 dwgBuffer::getBit(){
duint8 buffer;
duint8 ret = 0;
if (bitPos == 0){
filestr->read (&buffer,1);
currByte = buffer;
}
ret = (currByte >> (7 - bitPos) & 1);
bitPos +=1;
if (bitPos == 8)
bitPos = 0;
return ret;
}
/**Reads one Bit returns a bool value 0==false 1==true (B) **/
bool dwgBuffer::getBoolBit(){
return (getBit() != 0);
}
/**Reads two Bits returns a char (BB) **/
duint8 dwgBuffer::get2Bits(){
duint8 buffer;
duint8 ret = 0;
if (bitPos == 0){
filestr->read (&buffer,1);
currByte = buffer;
}
bitPos +=2;
if (bitPos < 9)
ret = currByte >>(8 - bitPos);
else {//read one bit per byte
ret = currByte << 1;
filestr->read (&buffer,1);
currByte = buffer;
bitPos = 1;
ret = ret | currByte >> 7;
}
if (bitPos == 8)
bitPos = 0;
ret = ret & 3;
return ret;
}
/**Reads thee Bits returns a char (3B) **/
//RLZ: todo verify this
duint8 dwgBuffer::get3Bits(){
duint8 buffer;
duint8 ret = 0;
if (bitPos == 0){
filestr->read (&buffer,1);
currByte = buffer;
}
bitPos +=3;
if (bitPos < 9)
ret = currByte >>(8 - bitPos);
else {//read one bit per byte
ret = currByte << 1;
filestr->read (&buffer,1);
currByte = buffer;
bitPos = 1;
ret = ret | currByte >> 7;
}
if (bitPos == 8)
bitPos = 0;
ret = ret & 7;
return ret;
}
/**Reads tree Bits returns a char (3B) for R24 **/
//to be written
/**Reads compressed Short (max. 16 + 2 bits) little-endian order, returns a UNsigned 16 bits (BS) **/
duint16 dwgBuffer::getBitShort(){
duint8 b = get2Bits();
if (b == 0)
return getRawShort16();
else if (b== 1)
return getRawChar8();
else if (b == 2)
return 0;
else
return 256;
}
/**Reads compressed Short (max. 16 + 2 bits) little-endian order, returns a signed 16 bits (BS) **/
dint16 dwgBuffer::getSBitShort(){
duint8 b = get2Bits();
if (b == 0)
return static_cast(getRawShort16());
else if (b== 1)
return static_cast(getRawChar8());
else if (b == 2)
return 0;
else
return 256;
}
/**Reads compressed 32 bits Int (max. 32 + 2 bits) little-endian order, returns a signed 32 bits (BL) **/
//to be written
dint32 dwgBuffer::getBitLong(){
dint8 b = get2Bits();
if (b == 0)
return getRawLong32();
else if (b== 1)
return getRawChar8();
else //if (b == 2)
return 0;
}
/**Reads compressed 64 bits Int (max. 56 + 3 bits) little-endian order, returns a unsigned 64 bits (BLL) **/
duint64 dwgBuffer::getBitLongLong(){
dint8 b = get3Bits();
duint64 ret=0;
for (duint8 i=0; iread (buffer,8);
}
double* ret = reinterpret_cast( buffer );
return *ret;
}
// if (b == 2)
return 0.0;
}
/**Reads 3 compressed Double (max. 64 + 2 bits) returns a DRW_Coord of floating point double of 64 bits (3BD) **/
DRW_Coord dwgBuffer::get3BitDouble(){
DRW_Coord crd;
crd.x = getBitDouble();
crd.y = getBitDouble();
crd.z = getBitDouble();
return crd;
}
/**Reads raw char 8 bits returns a unsigned char (RC) **/
duint8 dwgBuffer::getRawChar8(){
duint8 ret=0;
duint8 buffer=0;
filestr->read (&buffer,1);
if (bitPos == 0)
return buffer;
else {
ret = currByte << bitPos;
currByte = buffer;
ret = ret | (currByte >>(8 - bitPos));
}
return ret;
}
/**Reads raw short 16 bits little-endian order, returns a unsigned short (RS) **/
duint16 dwgBuffer::getRawShort16(){
duint8 buffer[2]={0,0};
duint16 ret=0;
filestr->read (buffer,2);
if (bitPos == 0) {
/* no offset directly swap bytes for little-endian */
ret = (buffer[1] << 8) | (buffer[0] & 0x00FF);
} else {
ret = (buffer[0] << 8) | (buffer[1] & 0x00FF);
/* apply offset */
ret = ret >> (8 - bitPos);
ret = ret | (currByte << (8 + bitPos));
currByte = buffer[1];
/* swap bytes for little-endian */
ret = (ret << 8) | (ret >> 8);
}
return ret;
}
/**Reads raw double IEEE standard 64 bits returns a double (RD) **/
double dwgBuffer::getRawDouble(){
duint8 buffer[8];
memset(buffer,0,sizeof(buffer));
if (bitPos == 0)
filestr->read (buffer,8);
else {
for (int i = 0; i < 8; i++)
buffer[i] = getRawChar8();
}
double* nOffset = reinterpret_cast( buffer );
return *nOffset;
}
/**Reads 2 raw double IEEE standard 64 bits returns a DRW_Coord of floating point double 64 bits (2RD) **/
DRW_Coord dwgBuffer::get2RawDouble(){
DRW_Coord crd;
crd.x = getRawDouble();
crd.y = getRawDouble();
return crd;
}
/**Reads raw int 32 bits little-endian order, returns a unsigned (RL) **/
duint32 dwgBuffer::getRawLong32(){
duint16 tmp1 = getRawShort16();
duint16 tmp2 = getRawShort16();
duint32 ret = (tmp2 << 16) | (tmp1 & 0x0000FFFF);
return ret;
}
/**Reads raw int 64 bits little-endian order, returns a unsigned long long (RLL) **/
duint64 dwgBuffer::getRawLong64(){
duint32 tmp1 = getRawLong32();
duint64 tmp2 = getRawLong32();
duint64 ret = (tmp2 << 32) | (tmp1 & 0x00000000FFFFFFFF);
return ret;
}
/**Reads modular unsigner int, char based, compressed form, little-endian order, returns a unsigned (U-MC) **/
duint32 dwgBuffer::getUModularChar(){
std::vector buffer;
duint32 result =0;
for (int i=0; i<4;i++){
duint8 b= getRawChar8();
buffer.push_back(b & 0x7F);
if (! (b & 0x80))
break;
}
int offset = 0;
for (unsigned int i=0; i buffer;
dint32 result =0;
for (int i=0; i<4;i++){
duint8 b= getRawChar8();
buffer.push_back(b & 0x7F);
if (! (b & 0x80))
break;
}
dint8 b= buffer.back();
if (b & 0x40) {
negative = true;
buffer.pop_back();
buffer.push_back(b & 0x3F);
}
int offset = 0;
for (unsigned int i=0; i buffer;
dint32 result =0;
for (int i=0; i<2;i++){
duint16 b= getRawShort16();
buffer.push_back(b & 0x7FFF);
if (! (b & 0x8000))
break;
}
//only positive ?
/* dint8 b= buffer.back();
if (! (b & 0x40)) {
negative = true;
buffer.pop_back();
buffer.push_back(b & 0x3F);
}*/
int offset = 0;
for (unsigned int i=0; i> 4) & 0x0F;
hl.size = data & 0x0F;
hl.ref=0;
for (int i=0; i< hl.size;i++){
hl.ref = (hl.ref << 8) | getRawChar8();
}
return hl;
}
dwgHandle dwgBuffer::getOffsetHandle(duint32 href){ //H
dwgHandle hl = getHandle();
if (hl.code > 5){
if (hl.code == 0x0C)
hl.ref = href - hl.ref;
else if (hl.code == 0x0A)
hl.ref = href + hl.ref;
else if (hl.code == 0x08)
hl.ref = href - 1;
else if (hl.code == 0x06)
hl.ref = href + 1;
//all are soft pointer reference change to 7 (without offset)
hl.code = 7;
}
return hl;
}
//internal until 2004
std::string dwgBuffer::get8bitStr(){
duint16 textSize = getBitShort();
if (textSize == 0)
return std::string();
duint8 *tmpBuffer = new duint8[textSize];
bool good = getBytes(tmpBuffer, textSize);
if (!good)
return std::string();
/* filestr->read (buffer,textSize);
if (!filestr->good())
return std::string();
duint8 tmp;
if (bitPos != 0){
for (int i=0; i> (8 - bitPos));
currByte = tmp;
}
}*/
std::string str(reinterpret_cast(tmpBuffer), textSize);
delete[]tmpBuffer;
return str;
}
//internal since 2007 //pending: are 2 bytes null terminated??
//nullTerm = true if string are 2 bytes null terminated from the stream
std::string dwgBuffer::get16bitStr(duint16 textSize, bool nullTerm){
if (textSize == 0)
return std::string();
textSize *=2;
duint16 ts = textSize;
if (nullTerm)
ts += 2;
duint8 *tmpBuffer = new duint8[textSize + 2];
bool good = getBytes(tmpBuffer, ts);
if (!good)
return std::string();
if (!nullTerm) {
tmpBuffer[textSize] = '\0';
tmpBuffer[textSize + 1] = '\0';
}
std::string str(reinterpret_cast(tmpBuffer), ts);
delete[]tmpBuffer;
return str;
}
//T 8 bit text converted from codepage to utf8
std::string dwgBuffer::getCP8Text(){
std::string strData;
strData = get8bitStr();//RLZ correct these function
if (!decoder)
return strData;
return decoder->toUtf8(strData);
}
//TU unicode 16 bit (UCS) text converted to utf8
/**Reads 2-bytes char (UCS2, NULL terminated) and convert to std::string (only for Latin-1)
ts= total input size in bytes.
**/
std::string dwgBuffer::getUCSStr(duint16 ts){
std::string strData;
if (ts<4) //at least 1 char
return std::string();
strData = get16bitStr(ts/2, false);
if (!decoder)
return strData;
return decoder->toUtf8(strData);
}
//TU unicode 16 bit (UCS) text converted to utf8
//nullTerm = true if string are 2 bytes null terminated from the stream
std::string dwgBuffer::getUCSText(bool nullTerm){
std::string strData;
duint16 ts = getBitShort();
if (ts == 0)
return std::string();
strData = get16bitStr(ts, nullTerm);
if (!decoder)
return strData;
return decoder->toUtf8(strData);
}
//RLZ: read a T or TU if version is 2007+
//nullTerm = true if string are 2 bytes null terminated from the stream
std::string dwgBuffer::getVariableText(DRW::Version v, bool nullTerm){//TV
if (v > DRW::AC1018)
return getUCSText(nullTerm);
return getCP8Text();
}
duint16 dwgBuffer::getObjType(DRW::Version v){//OT
if (v > DRW::AC1021) {
duint8 b = get2Bits();
if (b == 0)
return getRawChar8();
else if (b== 1){
return (getRawChar8() + 0x01F0);
} else //b == 2
return getRawShort16();
}
return getBitShort();
}
/* Bit Extrusion
* For R2000+, this is a single bit, If the single bit is 1,
* the extrusion value is assumed to be 0,0,1 and no explicit
* extrusion is stored. If the single bit is 0, then it will
* be followed by 3BD.
* For R13-R14 this is 3BD.
*/
DRW_Coord dwgBuffer::getExtrusion(bool b_R2000_style) {
DRW_Coord ext(0.0,0.0,1.0);
if ( b_R2000_style )
/* If the bit is one, the extrusion value is assumed to be 0,0,1*/
if ( getBit() == 1 )
return ext;
/*R13-R14 or bit == 0*/
ext.x = getBitDouble();
ext.y = getBitDouble();
ext.z = getBitDouble();
return ext;
}
/**Reads compressed Double with default (max. 64 + 2 bits) returns a floating point double of 64 bits (DD) **/
double dwgBuffer::getDefaultDouble(double d){
dint8 b = get2Bits();
if (b == 0)
return d;
else if (b == 1){
duint8 buffer[4];
char *tmp=nullptr;
if (bitPos != 0) {
for (int i = 0; i < 4; i++)
buffer[i] = getRawChar8();
} else {
filestr->read (buffer,4);
}
tmp = reinterpret_cast(&d);
for (int i = 0; i < 4; i++)
tmp[i] = buffer[i];
double ret = *reinterpret_cast( tmp );
return ret;
} else if (b == 2){
duint8 buffer[6];
char *tmp=nullptr;
if (bitPos != 0) {
for (int i = 0; i < 6; i++)
buffer[i] = getRawChar8();
} else {
filestr->read (buffer,6);
}
tmp = reinterpret_cast(&d);
for (int i = 2; i < 6; i++)
tmp[i-2] = buffer[i];
tmp[4] = buffer[0];
tmp[5] = buffer[1];
double ret = *reinterpret_cast( tmp );
return ret;
}
// if (b == 3) return a full raw double
return getRawDouble();
}
/* BitThickness
* For R13-R14, this is a BD.
* For R2000+, this is a single bit, If the bit is one,
* the thickness value is assumed to be 0.0, if not a BD follow
*/
double dwgBuffer::getThickness(bool b_R2000_style) {
if ( b_R2000_style )
/* If the bit is one, the thickness value is assumed to be 0.0.*/
if ( getBit() == 1 )
return 0.0;
/*R13-R14 or bit == 0*/
return getBitDouble();
}
/* CmColor (CMC)
* For R15 and earlier call directly BS as ACIS color.
* For R2004+, can be CMC or ENC
* RGB value, first 4bits 0xC0 => ByLayer, 0xC1 => ByBlock, 0xC2 => RGB, 0xC3 => last 4 are ACIS
*/
duint32 dwgBuffer::getCmColor(DRW::Version v) {
if (v < DRW::AC1018) //2000-
return getSBitShort();
duint16 idx = getBitShort();
duint32 rgb = getBitLong();
duint8 cb = getRawChar8();
duint8 type = rgb >> 24;
DRW_DBG("\ntype COLOR: "); DRW_DBGH(type);
DRW_DBG("\nindex COLOR: "); DRW_DBGH(idx);
DRW_DBG("\nRGB COLOR: "); DRW_DBGH(rgb);
DRW_DBG("\nbyte COLOR: "); DRW_DBGH(cb);
if (cb&1){
std::string colorName = getVariableText(v, false);
DRW_DBG("\ncolorName: "); DRW_DBG(colorName);
}
if (cb&2){
std::string bookName = getVariableText(v, false);
DRW_DBG("\nbookName: "); DRW_DBG(bookName);
}
switch (type) {
case 0xC0:
return 256;//ByLayer
case 0xC1:
return 0;//ByBlock
case 0xC2:
return 256;//RGB RLZ TODO
case 0xC3:
return rgb&0xFF;//ACIS
default:
break;
}
//check cb if strings follows RLZ TODO
return 256; //default return ByLayer
}
/* EnColor (ENC)
* For R15 and earlier call directly BS as ACIS color.
* For R2004+, can be CMC or ENC
* RGB value, first 4bits 0xC0 => ByLayer, 0xC1 => ByBlock, 0xC2 => RGB, 0xC3 => last 4 are ACIS
*/
duint32 dwgBuffer::getEnColor(DRW::Version v) {
if (v < DRW::AC1018) //2000-
return getSBitShort();
duint32 rgb = 0;
duint32 cb = 0;
duint16 idx = getBitShort();
DRW_DBG("idx reads COLOR: "); DRW_DBGH(idx);
duint16 flags = idx>>8;
idx = idx & 0x1FF; //RLZ: warning this is correct?
DRW_DBG("\nflag COLOR: "); DRW_DBGH(flags);
DRW_DBG(", index COLOR: "); DRW_DBGH(idx);
// if (flags & 0x80) {
// rgb = getBitLong();
// DRW_DBG("\nRGB COLOR: "); DRW_DBGH(rgb);
// }
if (flags & 0x20) {
cb = getBitLong();
DRW_DBG("\nTransparency COLOR: "); DRW_DBGH(cb);
}
if (flags & 0x40)
DRW_DBG("\nacdbColor COLOR are present");
else {
if (flags & 0x80) {
rgb = getBitLong();
DRW_DBG("\nRGB COLOR: "); DRW_DBGH(rgb);
}
}
/* if (flags & 0x80)
return getBitLong();*/
return idx; //default return ByLayer
}
/**Reads raw short 16 bits big-endian order, returns a unsigned short crc & size **/
duint16 dwgBuffer::getBERawShort16(){
char buffer[2];
buffer[0] = getRawChar8();
buffer[1] = getRawChar8();
duint16 size = (buffer[0] << 8) | (buffer[1] & 0xFF);
return size;
}
/* reads "size" bytes and stores in "buf" return false if fail */
bool dwgBuffer::getBytes(unsigned char *buf, duint64 size){
duint8 tmp;
filestr->read (buf,size);
if (!filestr->good())
return false;
if (bitPos != 0){
for (duint64 i=0; i> (8 - bitPos));
currByte = tmp;
}
}
return true;
}
duint16 dwgBuffer::crc8(duint16 dx,dint32 start,dint32 end){
duint64 pos = filestr->getPos();
filestr->setPos(start);
int n = end-start;
duint8 *tmpBuf = new duint8[n];
duint8 *p = tmpBuf;
filestr->read (tmpBuf,n);
filestr->setPos(pos);
if (!filestr->good())
return 0;
duint8 al;
while (n-- > 0) {
al = (duint8)((*p) ^ ((dint8)(dx & 0xFF)));
dx = (dx>>8) & 0xFF;
dx = dx ^ crctable[al & 0xFF];
p++;
}
delete[]tmpBuf;
return(dx);
}
duint32 dwgBuffer::crc32(duint32 seed,dint32 start,dint32 end){
duint64 pos = filestr->getPos();
filestr->setPos(start);
int n = end-start;
duint8 *tmpBuf = new duint8[n];
duint8 *p = tmpBuf;
filestr->read (tmpBuf,n);
filestr->setPos(pos);
if (!filestr->good())
return 0;
duint32 invertedCrc = ~seed;
while (n-- > 0) {
duint8 data = *p++;
invertedCrc = (invertedCrc >> 8) ^ crc32Table[(invertedCrc ^ data) & 0xff];
}
delete[]tmpBuf;
return ~invertedCrc;
}
/*std::string dwgBuffer::getBytes(int size){
char buffer[size];
char tmp;
filestr->read (buffer,size);
if (!filestr->good())
return NULL;
if (bitPos != 0){
for (int i=0; i<=size;i++){
tmp = buffer[i];
buffer[i] = (currByte << bitPos) | (tmp >> (8 - bitPos));
currByte = tmp;
}
}
std::string st;
for (int i=0; i