/****************************************************************************
**
* Action that creates a set of lines, with support of angle and "snake" mode

Copyright (C) 2024 LibreCAD.org
Copyright (C) 2024 Dongxu Li (dongxuli2011 at gmail.com)

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
**********************************************************************/

#include <QObject>

#include "rs.h"

class QString;

struct LC_CommandItem {
    std::vector<std::pair<QString, QString>> const fullCmdList;
    std::vector<std::pair<QString, QString>> const shortCmdList;
    RS2::ActionType actionType;
};

/**
 * Constructor. Initiates main command dictionary.
 * mainCommand keeps a map from translated commands to actionType
 * shortCommand keeps a list of translated short commands
 * cmdTranslation contains both ways of mapping between translated and English
 * Command order:
 *      mainCommand (long form): Category (long) + Parameter(s)
 *      shortCommand: 2 letter keycode followed by legacy commands
 * Commands form:
 *    list all <main (full) command and translation string> pairs (category+parameters, i.e "line2p")
 *    Category: (long form for mainCommands, also appear is alias file as "command-untranslated")
 *        line - lin / li / l
 *        ...
 *        (others as req'd)
 *    Parameters:
 *        point - pt / p
 *        circle - cir / c
 *        radius - rad / r
 *        tangent - tan / t
 *        angled - ang / a
 *        vertical - ver / v
 *        horizontal - hor / h
 *        (others as req'd)
 *    Two character key-codes:
 *        first two letters for 'base' command or
 *        first letter of catagory followed by parameter (best choice when possible)
 *           draw line - li
 *           ...
 *           etc.
 */

const LC_CommandItem g_commandList[] = {

        //      draw entity command template
        /*        {
//          mainCommand / long form - full command, appears in alias file (librecad.alias)
            {{"mainCommand", QObject::tr("mainCommand", "translationText")},
             {"alt-mainCommand", QObject::tr("alt-mainCommand", "translationText")}},
//          Short form(s) - keycode, legacy and single character commands
            {{"keycode", QObject::tr("altcmd, "translationText")},
             {"(alt-)shortCommand", QObject::tr("(alt-)shortCommand", "translationText")}}
            RS2::ActionCommand
        },
*/
        {
            {{"cnlayer", QObject::tr("cnlayer")}},
            {{"cnly", QObject::tr("cnly")}},
            RS2::ActionLayersAddCmd
        },
        {
            {{"cslayer", QObject::tr("cslayer")}},
            {{"csly", QObject::tr("csly")}},
            RS2::ActionLayersActivateCmd
        },
        /* LINE COMMANDS */
        // draw line
        {
            {{"line2p", QObject::tr("line2p", "draw line")}},
            {{"li", QObject::tr("li", "draw line")},
             {"line", QObject::tr("line", "draw line")},
             {"l", QObject::tr("l", "draw line")}},
            RS2::ActionDrawLine
        },
        // draw Snake line
        {
            {{"sline", QObject::tr("sline", "draw snake line")}},
            {{"sli", QObject::tr("sli", "draw snake line")},
             {"sl", QObject::tr("sl", "draw snake line")}},
            RS2::ActionDrawSnakeLine
        },
        // draw Snake-X line
        {
            {{"slinex", QObject::tr("slinex", "draw snake line (X)")}},
            {{"slix", QObject::tr("slix", "draw snake line (X)")},
             {"slx", QObject::tr("rlx", "draw snake line (X)")}},
            RS2::ActionDrawSnakeLineX
        },
        // draw Snake-Y line
        {
            {{"sliney", QObject::tr("sliney", "draw snake line (Y)")}},
            {{"sliy", QObject::tr("sliy", "draw snake line (Y)")},
             {"sly", QObject::tr("rly", "draw snake line (Y)")}},
            RS2::ActionDrawSnakeLineY
        },
        // draw line at angle - v2.2.0r2
        {
            {{"lineang", QObject::tr("lineang", "angled line")}},
            {{"la", QObject::tr("la", "angled line")}},
            RS2::ActionDrawLineAngle
        },
        // draw horizontal line
        {
            {{"linehor", QObject::tr("linehor", "horizontal line")}},   // - v2.2.0r2
            {{"lh", QObject::tr("lh", "horizontal line")}},
            RS2::ActionDrawLineHorizontal
        },
        // draw vertical line
        {
            {{"linever", QObject::tr("linever", "vertical line")}},   // - v2.2.0r2
            {{"lv", QObject::tr("lv", "vertical line")}},
            RS2::ActionDrawLineVertical
        },
        // draw rectangle - v2.2.0r2
        {
            {{"linerec", QObject::tr("linerec", "draw rectangle")}},
            {{"re", QObject::tr("re", "draw rectangle")},
             {"rect", QObject::tr("rect", "draw rectangle")}},
            RS2::ActionDrawLineRectangle
        },
        // draw  rectangle 1 Point
        {
            {{"rect1", QObject::tr("rect1", "draw rectangle (1 Point)")}},
            {{"re1", QObject::tr("re1", "draw rectangle (1 Point)")}},
            RS2::ActionDrawRectangle1Point
        },
        // draw  rectangle 2 Points
        {
            {{"rect2", QObject::tr("rect2", "draw rectangle (2 Points)")}},
            {{"re2", QObject::tr("re2", "draw rectangle (2 Points)")}},
            RS2::ActionDrawRectangle2Points
        },
        // draw rectangle 3 Points
        {
            {{"rect3", QObject::tr("rect3", "draw rectangle (3 Points)")}},
            {{"re3", QObject::tr("re3", "draw rectangle (3 Points)")}},
            RS2::ActionDrawRectangle3Points
        },
        // slice/divide line
        {
            {{"slicel", QObject::tr("slicel", "slice/divide line")}},
            {{"sll", QObject::tr("sll", "slice/divide line")}},
            RS2::ActionDrawSliceDivideLine
        },
        // slice/divide circle/arc
        {
            {{"slicec", QObject::tr("slicec", "slice/divide circle/arc")}},
            {{"slc", QObject::tr("slc", "slice/divide circle/arc")}},
            RS2::ActionDrawSliceDivideCircle
        },
        // draw star
        {
            {{"star", QObject::tr("star", "draw star")}},
            {{"st", QObject::tr("st", "draw star")}},
            RS2::ActionDrawStar
        },
        // draw cross
        {
            {{"cross", QObject::tr("cross", "draw cross for circle")}},
            {{"cx", QObject::tr("cx", "draw cross for circle")}},
            RS2::ActionDrawCross
        },
        {
            {{"bbox", QObject::tr("bbox", "draw bound box")}},
            {{"bb", QObject::tr("bb", "draw bound box")}},
            RS2::ActionDrawBoundingBox
        },
        {
            {{"midline", QObject::tr("midline", "draw middle line")}},
            {{"ml", QObject::tr("ml", "draw mid line")}},
            RS2::ActionDrawLineMiddle
        },
        // draw line of points
        {
            {{"linepoints", QObject::tr("linepoints", "draw line of points")}},
            {{"lpoints", QObject::tr("lpoints", "draw line of points")}},
            RS2::ActionDrawLinePoints
        },
        {
            {{"midpoint", QObject::tr("midpoint", "draw middle points")}},
            {{"mpoint", QObject::tr("mpoint", "draw middle of points")}},
            RS2::ActionDrawPointsMiddle
        },
        // draw circle by arc
        {
            {{"circlebyarc", QObject::tr("criclebyarc", "draw circle by arc")}},
            {{"cba", QObject::tr("cba", "draw circle by arc")}},
            RS2::ActionDrawCircleByArc
        },
        // modify - duplicate
        {
            {{"duplicate", QObject::tr("duplicate", "duplicate entity")}},
            {{"dup", QObject::tr("dup", "duplicate entity")}},
            RS2::ActionModifyDuplicate
        },
        //  modify - align
        {
            {{"align", QObject::tr("align", "align entities")}},
            {{"al", QObject::tr("al", "align entities")}},
            RS2::ActionModifyAlign
        },
        //  modify - align one
        {
            {{"align1", QObject::tr("align1", "align entities")}},
            {{"al1", QObject::tr("al1", "align entities")}},
            RS2::ActionModifyAlignOne
        },
        {
            {{"alignref", QObject::tr("alignref", "align references")}},
            {{"alr", QObject::tr("alr", "align references")}},
            RS2::ActionModifyAlignRef
        },
        // line join
        {
            {{"linejoin", QObject::tr("linejoin", "lines join")}},
            {{"lj", QObject::tr("lj", "lines join")}},
            RS2::ActionModifyLineJoin
        },
        // break/divide
        {
            {{"breakdivide", QObject::tr("breakdivide", "break or divide entity")}},
            {{"bd", QObject::tr("bd", "break or divide entity")}},
            RS2::ActionModifyBreakDivide
        },
        // Line Gap
        {
            {{"gapline", QObject::tr("gapline", "line gap")}},
            {{"gl", QObject::tr("gl", "line gap")}},
            RS2::ActionModifyBreakDivide
        },
        // draw parallel line
        {
            {{"linepar", QObject::tr("linepar", "create parallel")},
             {"parallel", QObject::tr("parallel", "create parallel")},
             {"lineoff", QObject::tr("lineoff", "create parallel")}},
            {{"pa", QObject::tr("pa", "create parallel")},
             {"ll", QObject::tr("ll", "create parallel")}},
            RS2::ActionDrawLineParallel
        },
        // draw parallel line through point
        {
            {{"lineparthro", QObject::tr("lineparthro", "parallel through point")}},   // - v2.2.0r2
            {{"lp", QObject::tr("lp", "parallel through point")},
             {"ptp", QObject::tr("ptp", "parallel through point")}},
            RS2::ActionDrawLineParallelThrough
        },
        // draw angle bisector
        {
            {{"linebisect", QObject::tr("linebisect", "angle bisector")}},
            {{"bi", QObject::tr("bi", "angle bisector")},
             {"bisect", QObject::tr("bisect", "angle bisector")}},
            RS2::ActionDrawLineBisector
        },
        // draw line tangent to circle from point
        {
            {{"linetancp", QObject::tr("linetancp", "tangent point and circle")}},
            {{"lt", QObject::tr("lt", "tangent point and circle")},   // - v2.2.0r2
             {"tanpc", QObject::tr("tanpc", "tangent point and circle")}},
            RS2::ActionDrawLineTangent1
        },
        // draw line tangent to two existing circles - v2.2.0r2
        {
            {{"linetan2c", QObject::tr("linetan2c", "tangent two circles")}},
            {{"lc", QObject::tr("lc", "tangent two circles")}},
            RS2::ActionDrawLineTangent2
        },
        // draw line tangent to an existing circle perpendicular to an existing line - v2.2.0r2
        {
            {{"linetancper", QObject::tr("linetancper", "tangent line and circle")}},
            {{"or", QObject::tr("or", "tangent line and circle")}},
            RS2::ActionDrawLineOrthTan
        },
        // draw perpendicular line
        {
            {{"lineperp", QObject::tr("lineperp", "perpendicular line")}},
            {{"lo", QObject::tr("lo", "perpendicular line")},
             {"ortho", QObject::tr("ortho", "perpendicular line")}},
            RS2::ActionDrawLineOrthogonal
        },
        // draw line with relative angle - v2.2.0r2
        {
            {{"linerelang", QObject::tr("linerelang", "relative line")}},
            {{"lr", QObject::tr("lr", "relative line")}},
            RS2::ActionDrawLineRelAngle
        },
        // draw polygon by centre and point - v2.2.0r2
        {
            {{"polygoncencor", QObject::tr("polygoncencor", "polygon centre point")}},
            {{"pp", QObject::tr("pp", "polygon centre point")},   // - v2.2.0r2
             {"polycp", QObject::tr("polycp", "polygon centre point")},
             {"pcp", QObject::tr("pcp", "polygon centre point")}},
            RS2::ActionDrawLinePolygonCenCor
        },
        // draw polygon by centre and vertex - v2.2.0r2
        {
            {{"polygoncentan", QObject::tr("polygoncentan", "polygon centre vertex")}},
            {{"pv", QObject::tr("pv", "polygon centre vertex")},   // - v2.2.0r2
             {"polyct", QObject::tr("polyct", "polygon centre vertex")}},
            RS2::ActionDrawLinePolygonCenTan
        },
    // draw polygon by vertex and vertex - or side and side
        {
            {{"polygonvv", QObject::tr("polygonvv", "polygon vertex vertex")}},
            {{"pvv", QObject::tr("pvv", "polygon vertex vertex")}},   // - v2.2.0r2
            RS2::ActionDrawLinePolygonSideSide
        },
        // draw polygon by 2 vertices
        {
            {{"polygon2v", QObject::tr("polygon2v", "polygon by 2 vertices")}},
            {{"p2", QObject::tr("p2", "polygon by 2 vertices")},   // - v2.2.0r2
             {"poly2", QObject::tr("poly2", "polygon by 2 vertices")}},
            RS2::ActionDrawLinePolygonCorCor
        },

        /* CIRCLE COMMANDS */
        // draw circle
        {
            {{"circle", QObject::tr("circle", "draw circle")}},
            {{"ci", QObject::tr("ci", "draw circle")},
             {"c", QObject::tr("c", "draw circle")}},   // - v2.2.0r2
            RS2::ActionDrawCircle
        },
        // draw 2 point circle
        {
            {{"circle2p", QObject::tr("circle2p", "circle 2 points")}},
            {{"c2", QObject::tr("c2", "circle 2 points")},
             {"c2p", QObject::tr("c2p", "circle 2 points")}},
            RS2::ActionDrawCircle2P
        },
        // draw circle 2 points and radius - v2.2.0r2
        {
            {{"circle2pr", QObject::tr("circle2pr", "circle 2 points radius")}},
            {{"cc", QObject::tr("cc", "circle 2 points radius")}},
            RS2::ActionDrawCircle2PR
        },
        // draw 3 point circle
        {
            {{"circle3p", QObject::tr("circle3p", "circle 3 points")}},
            {{"c3", QObject::tr("c3", "circle 3 points")},
             {"c3p", QObject::tr("c3p", "circle 3 points")}},
            RS2::ActionDrawCircle3P
        },
        // draw circle with centre point and radius - v2.2.0r2
        {
            {{"circlecr", QObject::tr("circlecr", "circle point radius")}},
            {{"cr", QObject::tr("cr", "circle point radius")},
             {"ccr", QObject::tr("ccr", "circle point radius")}},
            RS2::ActionDrawCircleCR
        },

        // draw circle tangential to 2 circles and 1 point - v2.2.0r2
        {
            {{"circletan2cp", QObject::tr("circletan2cp", "circle 2 tangent point")}},
            {{"tr", QObject::tr("tr", "circle 2 tangent point")}},
            RS2::ActionDrawCircleTan2_1P
        },
        // draw circle Tangential to 2 Points - v2.2.0r2
        {
            {{"circletan2p", QObject::tr("circletan2p", "circle tangent 2 points")}},
            {{"td", QObject::tr("td", "circle tangent 2 points")}},
            RS2::ActionDrawCircleTan1_2P
        },
        //draw circle tangential to 2 circles with specified radius - v2.2.0r2
        {
            {{"circletan2cr", QObject::tr("circletan2cr", "circle 2 tangent radius")}},
            {{"tc", QObject::tr("tc", "circle 2 tangent radius")}},
            RS2::ActionDrawCircleTan2
        },

        // draw circle tangent to 3 objects
        {
            {{"circletan3", QObject::tr("circletan3", "circle tangent to 3")}},
            {{"t3", QObject::tr("t3", "circle tangent to 3")},   // - v2.2.0r2
             {"ct3", QObject::tr("ct3", "circle tangent to 3")},
             {"tan3", QObject::tr("tan3", "circle tangent to 3")}},
            RS2::ActionDrawCircleTan3
        },

        /* CURVE (ARC) COMMANDS */
        // draw arc by centre point and radius - v2.2.0r2 (Change to previous version)
        {
            {{"arc", QObject::tr("arc", "arc point radius")}},
            {{"ar", QObject::tr("ar", "arc point radius")},
             {"a", QObject::tr("a", "arc point radius")}},
            RS2::ActionDrawArc
        },
        // draw 3 points arc - v2.2.0r2 (Change to previous version)
        {
            {{"arc3p", QObject::tr("arc3p", "draw 3pt arc")}},
            {{"a3", QObject::tr("a3", "draw 3pt arc")}},
            RS2::ActionDrawArc3P
        },
        // draw arc tangential - v2.2.0r2
        {
            {{"arctan", QObject::tr("arctan", "arc tangent")}},
            {{"at", QObject::tr("at", "arc tangent")}},
            RS2::ActionDrawArcTangential
        },
        // draw 2 points arc - Radius
        {
            {{"arc2pr", QObject::tr("arc2p3", "draw 2pt arc radius")}},
            {{"a2r", QObject::tr("a2r", "draw 2pt arc radius")}},
            RS2::ActionDrawArc2PRadius
        },
        // draw 2 points arc - Length
        {
            {{"arc2pl", QObject::tr("arc2pl", "draw 2pt arc length")}},
            {{"a2l", QObject::tr("a2l", "draw 2pt arc length")}},
            RS2::ActionDrawArc2PLength
        },
        // draw 2 points arc - Height
        {
            {{"arc2ph", QObject::tr("arc2ph", "draw 2pt arc height")}},
            {{"a2h", QObject::tr("a2h", "draw 2pt arc height")}},
            RS2::ActionDrawArc2PHeight
        },
        // draw 2 points arc - Angle
        {
            {{"arc2pa", QObject::tr("arc2pa", "draw 2pt arc angle")}},
            {{"a2a", QObject::tr("a2a", "draw 2pt arc angle")}},
            RS2::ActionDrawArc2PAngle
        },

        // draw spline with degrees freedom
        {
            {{"spline", QObject::tr("spline", "draw spline")}},
            {{"sf", QObject::tr("sf", "draw spline")},   // - v2.2.0r2
             {"spl", QObject::tr("spl", "draw spline")}},
            RS2::ActionDrawSpline
        },
        //draw spline through points
        {
            {{"spline2", QObject::tr("spline2", "spline through points")}},
            {{"sp", QObject::tr("sp", "spline through points")},   // - v2.2.0r2
             {"stp", QObject::tr("stp", "spline through points")}},
            RS2::ActionDrawSplinePoints
        },
        // draw ellipse arc by axis - v2.2.0r2
        {
            {{"arcellc2ax", QObject::tr("arcellc2ax", "arc ellipse")}},
            {{"ae", QObject::tr("ae", "arc ellipse")}},
            RS2::ActionDrawEllipseArcAxis
        },
        {
            {{"arcellc1ax", QObject::tr("arcellc1ax", "arc ellipse 1 point")}},
            {{"ae1", QObject::tr("ae1", "arc ellipse 1 point")}},
            RS2::ActionDrawEllipseArc1Point
        },
        // draw parabola by 4 points - v2.2.1
        {
            {{"parabola4p", QObject::tr("parabola4p", "Parabola 4 points")}},
            {{"pl4", QObject::tr("pl4", "Parabola 4 points")}},
            RS2::ActionDrawParabola4Points
        },
        // draw parabola by focus directrix - v2.2.1
        {
            {{"parabolafd", QObject::tr("parabolafd", "Parabola focus directrix")}},
            {{"plfd", QObject::tr("plfd", "Parabola focus directrix")}},
            RS2::ActionDrawParabolaFD
        },
        //draw freehand line
        {
            {{"free", QObject::tr("free", "draw freehand line")}},
            {{"fh", QObject::tr("fh", "draw freehand line")},   // - v2.2.0r2
             {"fhl", QObject::tr("fhl", "draw freehand line")}},
            RS2::ActionDrawLineFree
        },

        /* ELLIPSE COMMANDS */
        // draw ellipse by axis - v2.2.0r2
        {
            {{"ellipsec2p", QObject::tr("ellipsec2p", "ellipse axis")}},
            {{"ea", QObject::tr("ea", "ellipse axis")}},
            RS2::ActionDrawEllipseAxis
        },
        {
            {{"ellipsec1p", QObject::tr("ellipsec1p", "ellipse 1 point")}},
            {{"ea1", QObject::tr("ea1", "ellipse 1 point")}},
            RS2::ActionDrawEllipse1Point
        },
        // draw ellipse by foci point - v2.2.0r2
        {
            {{"ellipse3p", QObject::tr("ellipse3p", "ellipse foci")}},
            {{"ef", QObject::tr("ef", "ellipse foci")}},
            RS2::ActionDrawEllipseFociPoint
        },
        // draw 4 points ellipse - v2.2.0r2
        {
            {{"ellipse4p", QObject::tr("ellipse4p", "ellipse 4 point")}},
            {{"e4", QObject::tr("e4", "ellipse 4 point")}},
            RS2::ActionDrawEllipse4Points
        },
        // draw ellipse by center and 3 points - v2.2.0r2
        {
            {{"ellipsec3p", QObject::tr("ellipsec3p", "ellipse center 3 point")}},
            {{"e3", QObject::tr("e3", "ellipse center 3 point")}},
            RS2::ActionDrawEllipseCenter3Points
        },
        // draw inscribed ellipse
        {
            {{"ellipseinscribed", QObject::tr("ellipseinscribed", "inscribed ellipse")}},
            {{"ei", QObject::tr("ei", "inscribed ellipse")},
             {"ie", QObject::tr("ie", "inscribed ellipse")}},
            RS2::ActionDrawEllipseInscribe
        },

        /* POLYLINE COMMANDS */
        // draw polyline
        {
            {{"polyline", QObject::tr("polyline", "draw polyline")}},
            {{"pl", QObject::tr("pl", "draw polyline")}},
            RS2::ActionDrawPolyline
        },
        // draw angle line from line
        {
            {{"angleline", QObject::tr("angleline", "draw angle from line")}},
            {{"aline", QObject::tr("aline", "draw angle from line")}},
            RS2::ActionDrawLineAngleRel
        },
        // draw orthogonal line from line
        {
            {{"ortline", QObject::tr("rortoline", "draw orthogonal")}},
            {{"oline", QObject::tr("rort", "draw orthogonal")}},
            RS2::ActionDrawLineOrthogonalRel
        },
        // draw line from point to line
        {
            {{"point2line", QObject::tr("point2line", "draw line from point to line")}},
            {{"p2l", QObject::tr("p2l", "draw line from point to line")}},
            RS2::ActionDrawLineFromPointToLine
        },

        // polyline add node - v2.2.0r2
        {
            {{"plineadd", QObject::tr("plineadd", "pl add node")}},
            {{"pi", QObject::tr("pi", "pl add node")}},   // - v2.2.0r2
            RS2::ActionPolylineAdd
        },
        // polyline append node - v2.2.0r2
        {
            {{"plineapp", QObject::tr("plineapp", "pl append node")}},
            {{"pn", QObject::tr("pn", "pl append node")}},
            RS2::ActionPolylineAppend
        },
        // polyline delete node - v2.2.0r2
        {
            {{"plinedel", QObject::tr("plinedel", "pl delete node")}},
            {{"pd", QObject::tr("pd", "pl delete node")}},
            RS2::ActionPolylineDel
        },
        // polyline delete between two nodes - v2.2.0r2
        {
            {{"plinedeltwn", QObject::tr("plinedeltwn", "pl del between nodes")}},
            {{"pr", QObject::tr("pr", "pl del between nodes")}},
            RS2::ActionPolylineDelBetween
        },
        // polyline trim segments - v2.2.0r2
        {
            {{"plinetrm", QObject::tr("plinetrm", "pl trim segments")}},
            {{"pt", QObject::tr("pt", "pl trim segments")}},
            RS2::ActionPolylineTrim
        },
        // equidistant polyline - v2.2.0r2
        {
            {{"plinepar", QObject::tr("plinepar", "pl equidistant")}},
            {{"pe", QObject::tr("pe", "pl equidistant")}},
            RS2::ActionPolylineEquidistant
        },
        // polyline from existing segments - v2.2.0r2
        {
            {{"plinejoin", QObject::tr("plinejoin", "pl join")}},
            {{"pj", QObject::tr("pj", "pl join")}},
            RS2::ActionPolylineSegment
        },

        /* SELECT COMMANDS */
        // Select all entities
        {
            {{"selectall", QObject::tr("selectall", "Select all entities")}},
            {{"sa", QObject::tr("sa", "Select all entities")}},
            RS2::ActionSelectAll
        },
        // DeSelect all entities
        {
            {{"deselectall", QObject::tr("deselectall", "deselect all entities")}},
            {{"sx", QObject::tr("sx", "deselect all entities")},
             {"tn", QObject::tr("tn", "deselect all entities")}},   // - v2.2.0r2
            RS2::ActionDeselectAll
        },
        // Invert selection - v2.2.0r2
        {
            {{"invertselect", QObject::tr("invertselect", "invert select")}},
            {{"is", QObject::tr("is", "invert select")}},
            RS2::ActionSelectInvert
        },
        /* Remaining select tools require the mouse - no point in adding commands. */

        /* DIMENSION COMMANDS */
        // dimension aligned
        {
            {{"dimaligned", QObject::tr("dimaligned", "dimension - aligned")}},
            {{"ds", QObject::tr("ds", "dimension - aligned")}},   // - v2.2.0r2 (Change to previous version)
            RS2::ActionDimAligned
        },
        // dimension linear
        {
            {{"dimlinear", QObject::tr("dimlinear", "dimension - linear")}},
            {{"dl", QObject::tr("dl", "dimension - linear")}},
            RS2::ActionDimLinear
        },
        // dimension ordinate
        {
            {{"dimord", QObject::tr("dimord", "dimension - ordinate")}},
            {{"do", QObject::tr("do", "dimension - ordinate")}},
            RS2::ActionDimOrdinate
        },
        {
                {{"dimordrebase", QObject::tr("dimordrebase", "dimension - ordinate")}},
                {{"dor", QObject::tr("dor", "dimension - ordinate")}},
                RS2::ActionDimOrdRebase
            },
        // dimension horizontal
        {
            {{"dimhorizontal", QObject::tr("dimhorizontal", "dimension - horizontal")}},
            {{"dh", QObject::tr("dh", "dimension - horizontal")}},
            RS2::ActionDimLinearHor
        },
        // dimension vertical
        {
            {{"dimvertical", QObject::tr("dimvertical", "dimension - vertical")}},
            {{"dv", QObject::tr("dv", "dimension - vertical")}},
            RS2::ActionDimLinearVer
        },
        // dimension radius
        {
            {{"dimradius", QObject::tr("dimradius", "dimension - radial")},
             {"dimradial", QObject::tr("dimradial", "dimension - radial")}},
            {{"dr", QObject::tr("dr", "dimension - radial")}},
            RS2::ActionDimRadial
        },
        // dimension diameter
        {
            {{"dimdiameter", QObject::tr("dimdiameter", "dimension - diametric")}},
            {{"dd", QObject::tr("dd", "dimension - diametric")},
             {"dimdiametric", QObject::tr("dimdiametric", "dimension - diametric")}},
            RS2::ActionDimDiametric
        },
        // dimension angular
        {
            {{"dimangular", QObject::tr("dimangular", "dimension - angular")}},
            {{"da", QObject::tr("da", "dimension - angular")},
             {"dan", QObject::tr("dan", "dimension - angular")}},
            RS2::ActionDimAngular
        },
        // dimension leader
        {
            {{"dimleader", QObject::tr("dimleader", "dimension - leader")}},
            {{"ld", QObject::tr("ld", "dimension - leader")}},
            RS2::ActionDimLeader
        },
        // dimension regenerate
        {
            {{"dimregen", QObject::tr("dimregen", "dimension - regenerate")}},
            {{"dg", QObject::tr("dg", "dimension - regenerate")}},
            RS2::ActionDimRegenerate
        },

        /* MODIFY COMMANDS */
        // move
        {
            {{"modmove", QObject::tr("modmove", "modify - move (copy)")}},
            {{"mv", QObject::tr("mv", "modify - move (copy)")}},
            RS2::ActionModifyMove
        },
        // rotate
        {
            {{"modrotate", QObject::tr("modrotate", "modify - rotate")}},
            {{"ro", QObject::tr("ro", "modify - rotate")}},
            RS2::ActionModifyRotate
        },
        // scale
        {
            {{"modscale", QObject::tr("modscale", "modify - scale")}},
            {{"sz", QObject::tr("sz", "modify - scale")}},
            RS2::ActionModifyScale
        },
        // mirror  (Removed extra space from translation sting.)
        {
            {{"modmirror", QObject::tr("modmirror", "modify -  mirror")}},
            {{"mi", QObject::tr("mi", "modify -  mirror")}},
            RS2::ActionModifyMirror
        },
        // move and rotate - v2.2.0r2
        {
            {{"modmovrot", QObject::tr("modmovrot", "modify - move rotate")}},
            {{"mr", QObject::tr("mr", "modify - move rotate")}},
            RS2::ActionModifyMoveRotate
        },
        // rotate two - v2.2.0r2
        {
            {{"mod2rot", QObject::tr("mod2rot", "modify - rotate2")}},
            {{"r2", QObject::tr("r2", "modify - rotate2")}},
            RS2::ActionModifyRotate2
        },
        // revert (Removed extra space from translation sting.)
        {
            {{"modrevert", QObject::tr("modrevert", "modify -  revert direction")}},
            {{"md", QObject::tr("md", "modify -  revert direction")},
             {"rev", QObject::tr("rev", "modify -  revert direction")}},
            RS2::ActionModifyRevertDirection
        },
        // trim
        {
            {{"modtrim", QObject::tr("modtrim", "modify - trim (extend)")}},
            {{"tm", QObject::tr("tm", "modify - trim (extend)")}},
            RS2::ActionModifyTrim
        },
        // trim2
        {
            {{"modtrim2", QObject::tr("modtrim2", "modify - multi trim (extend)")}},
            {{"t2", QObject::tr("t2", "modify - multi trim (extend)")},
             {"tm2", QObject::tr("tm2", "modify - multi trim (extend)")}},
            RS2::ActionModifyTrim2
        },
        // lengthen
        {
            {{"modlengthen", QObject::tr("modlengthen", "modify - lengthen")}},
            {{"le", QObject::tr("le", "modify - lengthen")}},
            RS2::ActionModifyTrimAmount
        },
        // offset
        {
            {{"modoffset", QObject::tr("modoffset", "modify - offset")},
             {"offset", QObject::tr("offset", "modify - offset")}
         },
            {{"mo", QObject::tr("mo", "modify - offset")},   // - v2.2.0r2
             {"moff", QObject::tr("moff", "modify - offset")}},
            RS2::ActionModifyOffset
        },
        // bevel
        {
            {{"modbevel", QObject::tr("modbevel", "modify - bevel")}},
            {{"bev", QObject::tr("bev", "modify - bevel")},
             {"ch", QObject::tr("ch", "modify - bevel")}},
            RS2::ActionModifyBevel
        },
        // fillet
        {
            {{"modfillet", QObject::tr("modfillet", "modify - fillet")}},
            {{"fi", QObject::tr("fi", "modify - fillet")},
             {"fillet", QObject::tr("fillet", "modify - fillet")},
             {"bevel", QObject::tr("bevel", "modify - fillet")}},
            RS2::ActionModifyRound
        },
        // divide
        {
            {{"moddivide", QObject::tr("moddivide", "modify - divide (cut)")},
             {"cut", QObject::tr("cut", "modify - divide (cut)")}},
            {{"div", QObject::tr("div", "modify - divide (cut)")},
             {"di", QObject::tr("di", "modify - divide (cut)")}},
            RS2::ActionModifyCut
        },
        // stretch
        {
            {{"modstretch", QObject::tr("modstretch", "modify - stretch")}},
            {{"ss", QObject::tr("ss", "modify - stretch")}},
            RS2::ActionModifyStretch
        },
        // modify properties
        {
            {{"modproperties", QObject::tr("modproperties", "modify properties")}},
            {{"prop", QObject::tr("prop", "modify properties")},
             {"mp", QObject::tr("mp", "modify properties")}},
            RS2::ActionModifyEntity
        },
        // modify attributes
        {
            {{"modattr", QObject::tr("modattr", "modify attribute")}},
            {{"attr", QObject::tr("attr", "modify attribute")},
             {"ma", QObject::tr("ma", "modify attribute")}},
            RS2::ActionModifyAttributes
        },
        // explode text - v2.2.0r2
        {
            {{"modexpltext", QObject::tr("modexpltext", "explode text strings")}},
            {{"xt", QObject::tr("xt", "explode text strings")}},
            RS2::ActionModifyExplodeText
        },
        // explode
        {
            {{"modexplode", QObject::tr("modexplode", "explode block/polyline into entities")}},
            {{"xp", QObject::tr("xp", "explode block/polyline into entities")}},
            RS2::ActionBlocksExplode
        },
        // delete
        {
            {{"moddelete", QObject::tr("moddelete", "modify - delete (erase)")}},
            {{"er", QObject::tr("er", "modify - delete (erase)")},
             {"del", QObject::tr("del", "modify - delete (erase)")}},
            RS2::ActionModifyDelete
        },

        /* INFO COMMANDS */
        // Distance Point to Point
        {
            {{"infodistance", QObject::tr("infodistance", "distance point to point")}},
            {{"id", QObject::tr("id", "distance point to point")},   // - v2.2.0r2
             {"dist", QObject::tr("dist", "distance point to point")},
             {"dpp", QObject::tr("dpp", "distance point to point")}},
            RS2::ActionInfoDistPoint2Point
        },
        // Distance Entity to Point
        {
            {{"infodistep", QObject::tr("infodistep", "distance entity to point")}},
            {{"ii", QObject::tr("ii", "distance entity to point")},   // - v2.2.0r2
             {"dep", QObject::tr("dep", "distance entity to point")}},
            RS2::ActionInfoDistEntity2Point
        },
        // Measure angle
        {
            {{"infoangle", QObject::tr("infoangle", "measure angle")}},
            {{"ia", QObject::tr("ia", "measure angle")},   // - v2.2.0r2
             {"ang", QObject::tr("ang", "measure angle")}},
            RS2::ActionInfoAngle
        },
        // Measure area
        {
            {{"infoarea", QObject::tr("infoarea", "measure area")}},
            {{"aa", QObject::tr("aa", "measure area")}},   // - v2.2.0r2
            RS2::ActionInfoArea
        },

        /* OTHER COMMANDS */
        // draw mtext
        {
            {{"mtext", QObject::tr("mtext", "draw mtext")}},
            {{"mt", QObject::tr("mt", "draw mtext")},   // - v2.2.0r2
             {"mtxt", QObject::tr("mtxt", "draw mtext")}},
            RS2::ActionDrawMText
        },
        // draw text
        {
            {{"text", QObject::tr("text", "draw text")}},
            {{"tx", QObject::tr("tx", "draw text")},   // - v2.2.0r2
             {"txt", QObject::tr("txt", "draw text")}},
            RS2::ActionDrawText
        },
        // draw hatch
        {
            {{"hatch", QObject::tr("hatch", "draw hatch")}},
            {{"ha", QObject::tr("ha", "draw hatch")}},
            RS2::ActionDrawHatch
        },
        // draw point
        {
            {{"point", QObject::tr("point", "draw point")}},
            {{"po", QObject::tr("po", "draw point")}},
            RS2::ActionDrawPoint
        },

        /* SNAP COMMANDS */
        /* snap exclusive - v2.2.0r2
        {
            {{"snapexcl", QObject::tr("snapexcl", "snap - excl")}},
            {{"sx", QObject::tr("sx", "snap - excl")},
             {"ex", QObject::tr("ex", "snap - excl")}},
            RS2::ActionSnapExcl  // Not present
        }, */
        // snap free
        {
            {{"snapfree", QObject::tr("snapfree", "snap - free")}},
            {{"so", QObject::tr("so", "snap - free")},
             {"os", QObject::tr("os", "snap - free")}},
            RS2::ActionSnapFree
        },
        // snap center
        {
            {{"snapcenter", QObject::tr("snapcenter", "snap - center")}},
            {{"sc", QObject::tr("sc", "snap - center")}},
            RS2::ActionSnapCenter
        },
        //snap dist
        {
            {{"snapdist", QObject::tr("snapdist", "snap - distance to endpoints")}},
            {{"sd", QObject::tr("sd", "snap - distance to endpoints")}},
            RS2::ActionSnapDist
        },
        // snap end
        {
            {{"snapend", QObject::tr("snapend", "snap - end points")}},
            {{"se", QObject::tr("se", "snap - end points")}},
            RS2::ActionSnapEndpoint
        },
        // snap grid
        {
            {{"snapgrid", QObject::tr("snapgrid", "snap - grid")}},
            {{"sg", QObject::tr("sg", "snap - grid")}},
            RS2::ActionSnapGrid
        },
        // snap intersection
        {
            {{"snapintersection", QObject::tr("snapintersection", "snap - intersection")}},
            {{"si", QObject::tr("si", "snap - intersection")}},
            RS2::ActionSnapIntersection
        },
        // snap middle
        {
            {{"snapmiddle", QObject::tr("snapmiddle", "snap - middle points")}},
            {{"sm", QObject::tr("sm", "snap - middle points")}},
            RS2::ActionSnapMiddle
        },
        // snap on entity
        {
            {{"snaponentity", QObject::tr("snaponentity", "snap - on entity")}},
            {{"sn", QObject::tr("sn", "snap - on entity")},
             {"np", QObject::tr("np", "snap - on entity")}},
            RS2::ActionSnapOnEntity
        },

        /* Snap Middle Manual */
        {
            //list all <full command, translation> pairs
            {{"snapmiddlemanual", QObject::tr("snapmiddlemanual", "snap middle manual")}}, 
            {{"snapmanual", QObject::tr("snapmanual", "snap middle manual")}, 
             {"smm", QObject::tr("smm", "snap middle manual")}}, 

            RS2::ActionSnapMiddleManual
        },

        // set relative zero
        {
            {{"setrelativezero", QObject::tr("setrelativezero", "set relative zero position")}},
            {{"rz", QObject::tr("rz", "set relative zero position")}},
            RS2::ActionSetRelativeZero
        },
        // snap restrictions
        {
            {{"restrictnothing", QObject::tr("restrictnothing", "restrict - nothing")}},
            {{"rn", QObject::tr("rn", "restrict - nothing")}},
            RS2::ActionRestrictNothing
        },
        // snap orthogonal
        {
            {{"restrictorthogonal", QObject::tr("restrictorthogonal", "restrict - orthogonal")}},
            {{"rr", QObject::tr("rr", "restrict - orthogonal")}},
            RS2::ActionRestrictOrthogonal
        },
        // snap horizontal
        {
            {{"restricthorizontal", QObject::tr("restricthorizontal", "restrict - horizontal")}},
            {{"rh", QObject::tr("rh", "restrict - horizontal")}},
            RS2::ActionRestrictHorizontal
        },
        // snap vertical
        {
            {{"restrictvertical", QObject::tr("restrictvertical", "restrict - vertical")}},
            {{"rv", QObject::tr("rv", "restrict - vertical")}},
            RS2::ActionRestrictVertical
        },

        /* MENU COMMANDS */
        /* EDIT COMMANDS */
        // kill actions
        {
            {{"kill", QObject::tr("kill", "kill all actions")}},
            {{"ki", QObject::tr("ki", "kill all actions")},
             {"k", QObject::tr("k", "kill all actions")}},
            RS2::ActionEditKillAllActions
        },
        // undo cycle
        {
            {{"undo", QObject::tr("undo", "undo cycle")}},
            {{"un", QObject::tr("un", "undo cycle")},
             {"u", QObject::tr("u", "undo cycle")}},
            RS2::ActionEditUndo
        },
        // redo cycle
        {
            {{"redo", QObject::tr("redo", "redo cycle")}},
            {{"rd", QObject::tr("rd", "redo cycle")},
             {"r", QObject::tr("r", "redo cycle")}},
            RS2::ActionEditRedo
        },

        /* OPTIONS COMMANDS */
        // Drawing Prefs - v2.2.0r2
        {
            {{"drawpref", QObject::tr("drawpref", "drawing preferences")}},
            {{"dp", QObject::tr("dp", "drawing preferences")}},
            RS2::ActionOptionsDrawing
        },

        /* VIEW COMMANDS */
        // zoom redraw
        {
            {{"regen", QObject::tr("regen", "zoom - redraw")},
             {"redraw", QObject::tr("redraw", "zoom - redraw")}},
            {{"rg", QObject::tr("rg", "zoom - redraw")},
             {"zr", QObject::tr("zr", "zoom - redraw")}},
            RS2::ActionZoomRedraw
        },
        // zoom in
        {
            {{"zoomin", QObject::tr("zoomin", "zoom - in")}},
            {{"zi", QObject::tr("zi", "zoom - in")}},
            RS2::ActionZoomIn
        },
        // zoom out
        {
            {{"zoomout", QObject::tr("zoomout", "zoom - out")}},
            {{"zo", QObject::tr("zo", "zoom - out")}},
            RS2::ActionZoomOut
        },
        // zoom auto
        {
            {{"zoomauto", QObject::tr("zoomauto", "zoom - auto")}},
            {{"za", QObject::tr("za", "zoom - auto")}},
            RS2::ActionZoomAuto
        },
        // zoom previous
        {
            {{"zoomprevious", QObject::tr("zoomprevious", "zoom - previous")}},
            {{"zv", QObject::tr("zv", "zoom - previous")}},
            RS2::ActionZoomPrevious
        },
        // zoom window
        {
            {{"zoomwindow", QObject::tr("zoomwindow", "zoom - window")}},
            {{"zw", QObject::tr("zw", "zoom - window")}},
            RS2::ActionZoomWindow
        },
        // zoom pan
        {
            {{"zoompan", QObject::tr("zoompan", "zoom - pan")}},
            {{"zp", QObject::tr("zp", "zoom - pan")}},
            RS2::ActionZoomPan
        }
    };

    // translations
std::vector<std::pair<QString, QString>> g_transList={
        {"angle",QObject::tr("angle")},
        {"angle1",QObject::tr("angle1")},
        {"angle2",QObject::tr("angle2")},
        {"dpi",QObject::tr("dpi")},
        {"close",QObject::tr("close")},
        {"chordlen",QObject::tr("chordlen")},
        {"columns",QObject::tr("columns")},
        {"columnspacing",QObject::tr("columnspacing")},
        {"equation",QObject::tr("equation")},
        {"factor",QObject::tr("factor")},
        {"length",QObject::tr("length")},
        {"length1",QObject::tr("length1", "bevel/fillet length1")},
        {"length2",QObject::tr("length2", "bevel/fillet length2")},
        {"number",QObject::tr("number")},
        {"radius",QObject::tr("radius")},
        {"rows",QObject::tr("rows")},
        {"rowspacing",QObject::tr("rowspacing")},
        {"through",QObject::tr("through")},
        {"trim",QObject::tr("trim")},

        // commands for relative line drawing actions
        {"x",QObject::tr("x")},
        {"y",QObject::tr("y")},
        {"p",QObject::tr("p")},
        {"anglerel",QObject::tr("anglerel")},
        {"start",QObject::tr("start")},

        // commands for line angle rel action
        {"offset",QObject::tr("offset")},
        {"linesnap",QObject::tr("linesnap")},
        {"ticksnap",QObject::tr("ticksnap")},

        // rectangle one point
        {"width",QObject::tr("width")},
        {"height",QObject::tr("height")},
        {"pos",QObject::tr("pos")},
        {"size",QObject::tr("size")},
        {"bevels",QObject::tr("bevels")},
        {"nopoly",QObject::tr("nopoly")},
        {"usepoly",QObject::tr("usepoly")},
        {"corners",QObject::tr("corners")},
        {"str",QObject::tr("str")},
        {"round",QObject::tr("round")},
        {"bevels",QObject::tr("bevels")},
        {"snap1",QObject::tr("snap1")},
        {"topl",QObject::tr("topl")},
        {"top",QObject::tr("top")},
        {"topr",QObject::tr("topr")},
        {"left",QObject::tr("left")},
        {"middle",QObject::tr("middle")},
        {"right",QObject::tr("right")},
        {"bottoml",QObject::tr("bottoml")},
        {"bottom",QObject::tr("bottom")},
        {"bottomr",QObject::tr("bottomr")},
        {"snapcorner",QObject::tr("snapcorner")},
        {"snapshift",QObject::tr("snapshift")},
        {"sizein",QObject::tr("sizein")},
        {"sizeout",QObject::tr("sizeout")},
        {"hor",QObject::tr("hor")},
        {"vert",QObject::tr("vert")},

        // rect 2 points
        {"snap2",QObject::tr("snap2")},
        {"corner",QObject::tr("corner")},
        {"mid-vert",QObject::tr("mid-vert")},
        {"mid-hor",QObject::tr("mid-hor")},
        // rect 3 points
        {"quad",QObject::tr("quad")},
        {"noquad",QObject::tr("noquad")},
        {"angle_inner",QObject::tr("angle_inner")},

        // line points
        {"edges",QObject::tr("edges")},
        {"edge-none",QObject::tr("edge-none")},
        {"edge-both",QObject::tr("edge-both")},
        {"edge-start",QObject::tr("edge-start")},
        {"edge-end",QObject::tr("edge-end")},
        {"end",QObject::tr("end")},
        {"both",QObject::tr("both")},
        {"none",QObject::tr("none")},
        {"fit",QObject::tr("fit")},
        {"nofit",QObject::tr("nofit")},
        {"dist_fixed",QObject::tr("dist_fixed")},
        {"dist_flex",QObject::tr("dist_flex")},
        {"distance",QObject::tr("distance")},


        // star
        {"sym",QObject::tr("sym")},
        {"nosym",QObject::tr("nosym")},
        // commands

        /** following are reversed translation,i.e.,from translated to english **/
        //not used as command keywords
        // used in function,checkCommand()
        {QObject::tr("angle"),"angle"},
        {QObject::tr("angle1"),"angle1"},
        {QObject::tr("angle2"),"angle2"},
        {QObject::tr("ang", "angle"),"angle"},
        {QObject::tr("an", "angle"),"angle"},

        {QObject::tr("center"),"center"},
        {QObject::tr("cen", "center"),"center"},
        {QObject::tr("ce", "center"),"center"},

        {QObject::tr("chordlen"),"chordlen"},
        //    {QObject::tr("length", "chord length"),"chord length"},
        {QObject::tr("cl", "chordlen"),"chordlen"},

        {QObject::tr("close"),"close"},
        {QObject::tr("c", "close"),"close"},

        {QObject::tr("columns"),"columns"},
        {QObject::tr("cols", "columns"),"columns"},
        {QObject::tr("co", "columns"),"columns"},

        {QObject::tr("columnspacing", "columnspacing for inserts"),"columnspacing"},
        {QObject::tr("colspacing", "columnspacing for inserts"),"columnspacing"},
        {QObject::tr("cs", "columnspacing for inserts"),"columnspacing"},

        {QObject::tr("factor"),"factor"},
        {QObject::tr("fact", "factor"),"factor"},
        {QObject::tr("f", "factor"),"factor"},

        {QObject::tr("equation"),"equation"},
        {QObject::tr("eqn", "equation"),"equation"},
        {QObject::tr("eq", "equation"),"equation"},

        {QObject::tr("help"),"help"},
        {QObject::tr("?", "help"),"help"},

        {QObject::tr("length","length"),"length"},
        {QObject::tr("len","length"),"length"},
        {QObject::tr("l","length"),"length"},

        {QObject::tr("length1","length1"),"length1"},
        {QObject::tr("len1","length1"),"length1"},
        {QObject::tr("l1","length1"),"length1"},

        {QObject::tr("length2","length2"),"length2"},
        {QObject::tr("len2","length2"),"length2"},
        {QObject::tr("l2","length2"),"length2"},

        {QObject::tr("number","number"),"number"},
        {QObject::tr("num","number"),"number"},
        {QObject::tr("n","number"),"number"},

        {QObject::tr("radius"),"radius"},
        {QObject::tr("ra","radius"),"radius"},

        {QObject::tr("reversed","reversed"),"reversed"},
        {QObject::tr("rev","reversed"),"reversed"},
        {QObject::tr("rev","reversed"),"reversed"},

        {QObject::tr("row", "row"),"row"},

        {QObject::tr("rowspacing", "rowspacing for inserts"),"rowspacing"},
        {QObject::tr("rs","rowspacing for inserts"),"rowspacing"},

        {QObject::tr("text"),"text"},
        {QObject::tr("t","text"),"text"},

        {QObject::tr("through"),"through"},
        {QObject::tr("t","through"),"through"},

        {QObject::tr("undo"),"undo cycle"},
        {QObject::tr("u","undo cycle"),"undo"},

        {QObject::tr("redo"),"redo cycle"},
        {QObject::tr("r","redo redo cycle"),"redo"},

        {QObject::tr("back"),"back"},
        {QObject::tr("b","back"),"back"},
        //printer preview
        {QObject::tr("bw"), "blackwhite"},
        {QObject::tr("blackwhite"), "blackwhite"},
        {QObject::tr("color"), "color"},
        {QObject::tr("paperoffset"),"paperoffset"},
        {QObject::tr("graphoffset"),"graphoffset"}

        // fixme - add reversive translation for added commands
    };