/****************************************************************************
**
** This file is part of the LibreCAD project, a 2D CAD program
**
** Copyright (C) 2010 R. van Twisk (librecad@rvt.dds.nl)
** Copyright (C) 2001-2003 RibbonSoft. All rights reserved.
**
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file gpl-2.0.txt included in the
** packaging of this file.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with this program; if not, write to the Free Software
** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
**
** This copyright notice MUST APPEAR in all copies of the script!
**
**********************************************************************/

#include "rs_arc.h"

#include "lc_quadratic.h"
#include "lc_rect.h"
#include "rs_debug.h"
#include "rs_information.h"
#include "rs_line.h"
#include "rs_math.h"
#include "rs_painter.h"

#ifdef EMU_C99
#include "emu_c99.h"
#endif

RS_ArcData::RS_ArcData(const RS_Vector& _center,
					   double _radius,
					   double _angle1, double _angle2,
					   bool _reversed):
	center(_center)
  ,radius(_radius)
  ,angle1(_angle1)
  ,angle2(_angle2)
  ,reversed(_reversed){
}

void RS_ArcData::reset() {
	center = RS_Vector(false);
	radius = 0.0;
	angle1 = 0.0;
	angle2 = 0.0;
	reversed = false;
}

void RS_Arc::setCenter(const RS_Vector& center) {
    data.center = center;
    calculateBorders();
}

void RS_Arc::setRadius(double radius) {
    if (RS_Math::notEqual(data.radius, radius)) {
        data.radius = radius;
        calculateBorders();
    }
}

void RS_Arc::setAngle1(double a1) {
    if (RS_Math::notEqual(data.angle1, a1)) {
        data.angle1 = RS_Math::correctAngle(a1);
        calculateBorders();
    }
}

/** Sets new end angle. */
void RS_Arc::setAngle2(double a2) {
    if (RS_Math::notEqual(data.angle2, a2)) {
        data.angle2 = RS_Math::correctAngle(a2);
        calculateBorders();
    }
}

void RS_Arc::setReversed(bool r) {
    if (data.reversed != r) {
        data.reversed = r;
        std::swap(data.angle1, data.angle2);
        std::swap(m_startPoint, m_endPoint);
    }
}

bool RS_ArcData::isValid() const{
	return (center.valid && radius>RS_TOLERANCE &&
			fabs(remainder(angle1-angle2, 2.*M_PI))>RS_TOLERANCE_ANGLE);
}

std::ostream& operator << (std::ostream& os, const RS_ArcData& ad) {
	os << "(" << ad.center <<
		  "/" << ad.radius <<
		  " " << ad.angle1 <<
		  "," << ad.angle2 <<
		  ")";
	return os;
}
/**
 * Default constructor.
 */
RS_Arc::RS_Arc(RS_EntityContainer* parent,
               const RS_ArcData& d)
    : LC_CachedLengthEntity(parent), data(d) {
    calculateBorders();
}

RS_Arc::RS_Arc(const RS_ArcData& d)
    : LC_CachedLengthEntity(nullptr), data(d) {
    calculateBorders();
}

RS_Entity* RS_Arc::clone() const {
	RS_Arc* a = new RS_Arc(*this);
	return a;
}

/**
 * Creates this arc from 3 given points which define the arc line.
 *
 * @param p1 1st point.
 * @param p2 2nd point.
 * @param p3 3rd point.
 */
bool RS_Arc::createFrom3P(const RS_Vector& p1, const RS_Vector& p2,
                          const RS_Vector& p3) {
    RS_Vector vra = p2 - p1;
    RS_Vector vrb = p3 - p1;
    double ra2 = vra.squared() * 0.5;
    double rb2 = vrb.squared() * 0.5;
    double crossp = vra.x * vrb.y - vra.y * vrb.x;
    if (fabs(crossp) < RS_TOLERANCE2) {
        RS_DEBUG->print(RS_Debug::D_WARNING, "RS_Arc::createFrom3P(): "
                        "Cannot create a arc with radius 0.0.");
        return false;
    }
    crossp = 1. / crossp;
    data.center.set((ra2 * vrb.y - rb2 * vra.y) * crossp, (rb2 * vra.x - ra2 * vrb.x) * crossp);
    data.radius = data.center.magnitude();
    data.center += p1;
    data.angle1 = data.center.angleTo(p1);
    data.angle2 = data.center.angleTo(p3);
    data.reversed = RS_Math::isAngleBetween(data.center.angleTo(p2),
                                            data.angle1, data.angle2, true);
    return true;
}

/**
 * Creates an arc from its startpoint, endpoint, start direction (angle)
 * and radius.
 *
 * @retval true Successfully created arc
 * @retval false Cannot create arc (radius to small or endpoint to far away)
 */
bool RS_Arc::createFrom2PDirectionRadius(const RS_Vector& startPoint,
        const RS_Vector& endPoint,
        double direction1, double radius) {

    RS_Vector ortho = RS_Vector::polar(radius, direction1 + M_PI_2);
    RS_Vector center1 = startPoint + ortho;
    RS_Vector center2 = startPoint - ortho;

    if (center1.distanceTo(endPoint) < center2.distanceTo(endPoint)) {
        data.center = center1;
    }
    else {
        data.center = center2;
    }

    data.radius = radius;
    data.angle1 = data.center.angleTo(startPoint);
    data.angle2 = data.center.angleTo(endPoint);
    data.reversed = false;

    double diff = RS_Math::correctAngle(getDirection1() - direction1);
    if (fabs(diff - M_PI) < 1.0e-1) {
        data.reversed = true;
    }
    calculateBorders();

    return true;
}

/**
 * Creates an arc from its startpoint, endpoint, start direction (angle)
 * and angle length.
 *
 * @retval true Successfully created arc
 * @retval false Cannot create arc (radius to small or endpoint to far away)
 */
bool RS_Arc::createFrom2PDirectionAngle(
    const RS_Vector& startPoint,
    const RS_Vector& endPoint,
    double direction1, double angleLength) {
    if (angleLength <= RS_TOLERANCE_ANGLE || angleLength > 2. * M_PI - RS_TOLERANCE_ANGLE) {
        return false;
    }
    RS_Line l0{nullptr, startPoint, startPoint - RS_Vector{direction1}};
    double const halfA = 0.5 * angleLength;
    l0.rotate(startPoint, halfA);

    double d0;
    RS_Vector vEnd0 = l0.getNearestPointOnEntity(endPoint, false, &d0);
    RS_Line l1 = l0;
    l1.rotate(startPoint, -angleLength);
    double d1;
    RS_Vector vEnd1 = l1.getNearestPointOnEntity(endPoint, false, &d1);
    if (d1 < d0) {
        vEnd0 = vEnd1;
        l0 = l1;
    }

    l0.rotate((startPoint + vEnd0) * 0.5, M_PI_2);

    l1 = RS_Line{nullptr, startPoint, startPoint + RS_Vector{direction1 + M_PI_2}};

    auto const sol = RS_Information::getIntersection(&l0, &l1, false);
    if (sol.size() == 0) {
        return false;
    }

    data.center = sol.at(0);

    data.radius = data.center.distanceTo(startPoint);
    data.angle1 = data.center.angleTo(startPoint);
    data.reversed = false;

    double diff = RS_Math::correctAngle(getDirection1() - direction1);
    if (fabs(diff - M_PI) < 1.0e-1) {
        data.angle2 = RS_Math::correctAngle(data.angle1 - angleLength);
        data.reversed = true;
    }
    else {
        data.angle2 = RS_Math::correctAngle(data.angle1 + angleLength);
    }
    calculateBorders();
    return true;
}

/**
 * Creates an arc from its startpoint, endpoint and bulge.
 */
bool RS_Arc::createFrom2PBulge(const RS_Vector& startPoint, const RS_Vector& endPoint,
                               double bulge) {
    data.reversed = (bulge < 0.0);
    double alpha = std::atan(bulge) * 4.0;

    RS_Vector middle = (startPoint + endPoint) / 2.0;
    double dist = startPoint.distanceTo(endPoint) / 2.0;

    // alpha can't be 0.0 at this point
    data.radius = std::abs(dist / std::sin(alpha / 2.0));

    double wu = std::abs(data.radius * data.radius - dist * dist);
    double angle = startPoint.angleTo(endPoint);
    bool reversed = std::signbit(bulge);
    angle = reversed ? angle - M_PI_2 : angle + M_PI_2;

    double h = (std::abs(alpha) > M_PI) ? -std::sqrt(wu) : std::sqrt(wu);

    data.center.setPolar(h, angle);
    data.center += middle;
    data.angle1 = data.center.angleTo(startPoint);
    data.angle2 = data.center.angleTo(endPoint);

    calculateBorders();

    return true;
}

void RS_Arc::calculateBorders() {
    m_startPoint = data.center.relative(data.radius, data.angle1);
    m_endPoint = data.center.relative(data.radius, data.angle2);
    LC_Rect const rect{m_startPoint, m_endPoint};

    double minX = rect.lowerLeftCorner().x;
    double minY = rect.lowerLeftCorner().y;
    double maxX = rect.upperRightCorner().x;
    double maxY = rect.upperRightCorner().y;

    double a1 = isReversed() ? data.angle2 : data.angle1;
    double a2 = isReversed() ? data.angle1 : data.angle2;
    if (RS_Math::isAngleBetween(0.5 * M_PI, a1, a2, false)) {
        maxY = data.center.y + data.radius;
    }
    if (RS_Math::isAngleBetween(1.5 * M_PI, a1, a2, false)) {
        minY = data.center.y - data.radius;
    }
    if (RS_Math::isAngleBetween(M_PI, a1, a2, false)) {
        minX = data.center.x - data.radius;
    }
    if (RS_Math::isAngleBetween(0., a1, a2, false)) {
        maxX = data.center.x + data.radius;
    }

    minV.set(minX, minY);
    maxV.set(maxX, maxY);
    updateMiddlePoint();

    updatePaintingInfo();
    updateLength();
}

void RS_Arc::updatePaintingInfo() {
    // angles in degrees
    data.startAngleDegrees = RS_Math::rad2deg(data.reversed ? data.angle2 : data.angle1);
    data.otherAngleDegrees = RS_Math::rad2deg(data.reversed ? data.angle1 : data.angle2);
//    double endAngle = RS_Math::rad2deg(reversed ? a1 : a2);
    data.angularLength = RS_Math::rad2deg(RS_Math::getAngleDifference(data.angle1, data.angle2, data.reversed));
    // Issue #1896: zero angular length arc is not supported, assuming 360 degree arcs
//    if (angularLength < RS_Math::rad2deg(RS_TOLERANCE_ANGLE))
//        angularLength = 360.;
//
// brute fix for #1896
    if (std::abs(data.angularLength) < RS_TOLERANCE_ANGLE) {
        // check whether angles are via period
        if (RS_Math::getPeriodsCount(data.angle1, data.angle2, data.reversed) != 0) {
            data.angularLength = 360; // in degrees
        }
    }
}

RS_Vector RS_Arc::getStartpoint() const{
    return m_startPoint;
}

/** @return End point of the entity. */
RS_Vector RS_Arc::getEndpoint() const{
    return m_endPoint;
}

RS_VectorSolutions RS_Arc::getRefPoints() const{
	//order: start, end, center
    //order: start, center, middle, end
    return {{getStartpoint(),  data.center, middlePoint, getEndpoint()}};
}

double RS_Arc::getDirection1() const {
    if (!data.reversed) {
        return RS_Math::correctAngle(data.angle1+M_PI_2);
    }
    else {
        return RS_Math::correctAngle(data.angle1-M_PI_2);
    }
}
/**
 * @return Direction 2. The angle at which the arc starts at
 * the endpoint.
 */
double RS_Arc::getDirection2() const {
    if (!data.reversed) {
        return RS_Math::correctAngle(data.angle2-M_PI_2);
    }
    else {
        return RS_Math::correctAngle(data.angle2+M_PI_2);
    }
}

RS_Vector RS_Arc::getNearestEndpoint(const RS_Vector& coord, double* dist) const{
    double dist1, dist2;

    auto const startpoint = getStartpoint();
    auto const endpoint = getEndpoint();

    dist1 = coord.squaredTo(startpoint);
    dist2 = coord.squaredTo(endpoint);

    if (dist2<dist1) {
        if (dist)
            *dist = sqrt(dist2);

        return endpoint;
    } else {
        if (dist)
            *dist = sqrt(dist1);

        return startpoint;
    }
}

/**
  *find the tangential points from a given point, i.e., the tangent lines should pass
  * the given point and tangential points
  *
  *Author: Dongxu Li
  */
RS_VectorSolutions RS_Arc::getTangentPoint(const RS_Vector& point) const {
    RS_VectorSolutions ret;
    double radius = getRadius();
    double r2(radius * radius);
    if (r2 < RS_TOLERANCE2) {
        return ret; //circle too small
    }
    RS_Vector vp(point - getCenter());
    double c2(vp.squared());
    if (c2 < r2 - radius * 2. * RS_TOLERANCE) {
        //inside point, no tangential point
        return ret;
    }
    if (c2 > r2 + radius * 2. * RS_TOLERANCE) {
        //external point
        RS_Vector vp1(-vp.y, vp.x);
        vp1 *= radius * sqrt(c2 - r2) / c2;
        vp *= r2 / c2;
        vp += getCenter();
        if (vp1.squared() > RS_TOLERANCE2) {
            ret.push_back(vp + vp1);
            ret.push_back(vp - vp1);
            return ret;
        }
    }
    ret.push_back(point);
    return ret;
}

RS_Vector RS_Arc::getTangentDirection(const RS_Vector &point) const {
    RS_Vector vp = isReversed() ? getCenter() - point : point - getCenter();
    return {-vp.y, vp.x};
}

RS_Vector RS_Arc::getNearestPointOnEntity(const RS_Vector& coord,
                                          bool onEntity, double* dist, RS_Entity** entity) const{

    RS_Vector vec(false);
    if (entity) {
        *entity = const_cast<RS_Arc*>(this);
    }

    double angle = (coord-data.center).angle();
    if ( ! onEntity || RS_Math::isAngleBetween(angle,data.angle1, data.angle2, isReversed())) {
        vec.setPolar(data.radius, angle);
        vec+=data.center;
    } else {
        return vec=getNearestEndpoint(coord, dist);
    }
    if (dist) {
        *dist = vec.distanceTo(coord);
//        RS_DEBUG->print(RS_Debug::D_ERROR, "distance to (%g, %g)=%g\n", coord.x,coord.y,*dist);
    }

    return vec;
}

RS_Vector RS_Arc::getNearestCenter(const RS_Vector& coord,double* dist) const{
    if (dist) {
        *dist = coord.distanceTo(data.center);
    }
    return data.center;
}

/*
 * get the nearest equidistant middle points
 * @coord, coordinate
 * @middlePoints, number of equidistant middle points
 *
 */

RS_Vector RS_Arc::getNearestMiddle(const RS_Vector& coord,double* dist,int middlePoints)const {
#ifndef EMU_C99
    using std::isnormal;
#endif

    RS_DEBUG->print("RS_Arc::getNearestMiddle(): begin\n");
    double amin=getAngle1();
    double amax=getAngle2();
    //std::cout<<"RS_Arc::getNearestMiddle(): middlePoints="<<middlePoints<<std::endl;
    if( !(isnormal(amin) || isnormal(amax))){
        //whole circle, no middle point
        if(dist) {
            *dist=RS_MAXDOUBLE;
        }
        return RS_Vector(false);
    }
    if(isReversed()) {
        std::swap(amin,amax);
    }
    double da=fmod(amax-amin+2.*M_PI, 2.*M_PI);
    if ( da < RS_TOLERANCE ) {
        da= 2.*M_PI; // whole circle
    }
    RS_Vector vp(getNearestPointOnEntity(coord,true,dist));
    double angle=getCenter().angleTo(vp);
    int counts=middlePoints+1;
    int i( static_cast<int>(fmod(angle-amin+2.*M_PI,2.*M_PI)/da*counts+0.5));
    if (!i) {
        i++; // remove end points
    }
    if(i==counts) {
        i--;
    }
    angle=amin + da*(double(i)/double(counts));
    vp.setPolar(getRadius(), angle);
    vp.move(getCenter());

    if (dist) {
        *dist = vp.distanceTo(coord);
    }
    RS_DEBUG->print("RS_Arc::getNearestMiddle(): end\n");
    return vp;
}

RS_Vector RS_Arc::getNearestDist(double distance,const RS_Vector& coord,double* dist) const{
    if (data.radius < RS_TOLERANCE) {
        if (dist)
            *dist = RS_MAXDOUBLE;

        return {};
    }

    double aDist = distance / data.radius;
    if (isReversed()) {
        aDist = -aDist;
    }

    double a;
    if (coord.distanceTo(getStartpoint()) < coord.distanceTo(getEndpoint())) {
        a = getAngle1() + aDist;
    }
    else {
        a = getAngle2() - aDist;
    }

    RS_Vector ret = RS_Vector::polar(data.radius, a);
    ret += getCenter();

    return ret;
}

RS_Vector RS_Arc::getNearestDist(double distance, bool startp) const {
    if (data.radius<RS_TOLERANCE) {
        return {};
    }

    double aDist = distance / data.radius;
    double a;
    if (isReversed()) {
        if (startp) {
            a = data.angle1 - aDist;
        } else {
            a = data.angle2 + aDist;
        }
    } else {
        if (startp) {
            a = data.angle1 + aDist;
        } else {
            a = data.angle2 - aDist;
        }
    }

    RS_Vector p = RS_Vector::polar(data.radius, a);
    p += data.center;

    return p;
}

RS_Vector RS_Arc::getNearestOrthTan(const RS_Vector& coord, const RS_Line& normal, bool onEntity ) const {
    if (!coord.valid) {
        return RS_Vector(false);
    }
    double angle = normal.getAngle1();
    RS_Vector vp = RS_Vector::polar(getRadius(), angle);
    std::vector<RS_Vector> sol;
    for (int i = 0; i <= 1; i++) {
        if (!onEntity ||
            RS_Math::isAngleBetween(angle, getAngle1(), getAngle2(), isReversed())) {
            if (i) {
                sol.push_back(-vp);
            }
            else {
                sol.push_back(vp);
            }
        }
        angle = RS_Math::correctAngle(angle + M_PI);
    }
    switch (sol.size()) {
        case 0:
            return RS_Vector(false);
        case 2:
            if (RS_Vector::dotP(sol[1], coord - getCenter()) > 0.) {
                vp = sol[1];
                break;
            }
        // fall-through
        default:
            vp = sol[0];
            break;
    }
    return getCenter() + vp;
}

RS_Vector RS_Arc::dualLineTangentPoint(const RS_Vector& line) const{
    RS_Vector dr = line.normalized() * data.radius;
    RS_Vector vp0 = data.center + dr;
    RS_Vector vp1 = data.center - dr;
    auto lineEqu = [&line](const RS_Vector& vp) {
        return std::abs(line.dotP(vp) + 1.);
    };
    return lineEqu(vp0) < lineEqu(vp1) ? vp0 : vp1;
}

void RS_Arc::moveStartpoint(const RS_Vector& pos) {
    // polyline arcs: move point not angle:
	//if (parent && parent->rtti()==RS2::EntityPolyline) {
    double bulge = getBulge();
	if(fabs(bulge - M_PI_2)<RS_TOLERANCE_ANGLE) {
	    return;
	}
    createFrom2PBulge(pos, getEndpoint(), bulge);
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    //}
}

void RS_Arc::moveEndpoint(const RS_Vector& pos) {
    // polyline arcs: move point not angle:
//if (parent && parent->rtti()==RS2::EntityPolyline) {
    double bulge = getBulge();
    createFrom2PBulge(getStartpoint(), pos, bulge);
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    //}
}

/**
  * this function creates offset
  *@coord, position indicates the direction of offset
  *@distance, distance of offset
  * return true, if success, otherwise, false
  *
  *Author: Dongxu Li
  */
bool RS_Arc::offset(const RS_Vector& coord, const double& distance) {
    /*  bool increase = coord.x > 0;
      double newRadius;
      if (increase){
          newRadius = getRadius() + std::abs(distance);
      }
      else{
          newRadius = getRadius() - std::abs(distance);
          if(newRadius < RS_TOLERANCE) {
              return false;
          }
      }
      */
    double dist(coord.distanceTo(getCenter()));
    double newRadius;
    if(dist> getRadius()){
        //external
        newRadius = getRadius()+ fabs(distance);
    }else{
        newRadius = getRadius()- fabs(distance);
        if(newRadius<RS_TOLERANCE) {
            return false;
        }
    }
    setRadius(newRadius);
    calculateBorders();
    return true;
}

std::vector<RS_Entity* > RS_Arc::offsetTwoSides(const double& distance) const{
    std::vector<RS_Entity*> ret(0,nullptr);
    double radius = getRadius();
    double angle1 = getAngle1();
    double angle2 = getAngle2();
    bool reversed = isReversed();
    auto center = getCenter();
    ret.push_back(new RS_Arc(nullptr, RS_ArcData(center, radius + distance, angle1, angle2, reversed)));
    if (radius > distance) {
        ret.push_back(new RS_Arc(nullptr, RS_ArcData(center, radius - distance, angle1, angle2, reversed)));
    }
    return ret;
}

/**
      * implementations must revert the direction of an atomic entity
      */
void RS_Arc::revertDirection(){
    std::swap(data.angle1,data.angle2);
    data.reversed = ! data.reversed;
    std::swap(m_startPoint, m_endPoint);
}

/**
 * make sure angleLength() is not more than 2*M_PI
 */
void RS_Arc::correctAngles() {
    double *pa1= & data.angle1;
    double *pa2= & data.angle2;
    if (isReversed()) {
        std::swap(pa1,pa2);
    }
    *pa2 = *pa1 + fmod(*pa2 - *pa1, 2.*M_PI);
    if ( fabs(getAngleLength()) < RS_TOLERANCE_ANGLE ) {
        *pa2 += 2.*M_PI;
    }
}

void RS_Arc::trimStartpoint(const RS_Vector& pos) {
    data.angle1 = data.center.angleTo(pos);
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    calculateBorders();
}

void RS_Arc::trimEndpoint(const RS_Vector& pos) {
    data.angle2 = data.center.angleTo(pos);
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    calculateBorders();
}

/**
  *@ trimCoord, mouse point
  *@  trimPoint, trim to this intersection point
  */
RS2::Ending RS_Arc::getTrimPoint(const RS_Vector& trimCoord,
                                 const RS_Vector& /*trimPoint*/) {

    //double angEl = data.center.angleTo(trimPoint);
    double angMouse = data.center.angleTo(trimCoord);
//    double angTrim = data.center.angleTo(trimPoint);
    if( fabs(remainder(angMouse-data.angle1, 2.*M_PI)) < fabs(remainder(angMouse-data.angle2, 2.*M_PI))) {
        return RS2::EndingStart;
    }
    else {
        return RS2::EndingEnd;
    }

//    if( RS_Math::isAngleBetween(angMouse , data.angle1, angTrim, isReversed())) {

//        return RS2::EndingEnd;
//    } else {

//        return RS2::EndingStart;
//    }
}

RS_Vector RS_Arc::prepareTrim(const RS_Vector& trimCoord,
                              const RS_VectorSolutions& trimSol) {
    //special trimming for ellipse arc
    RS_DEBUG->print("RS_Arc::prepareTrim(): begin");
    for(auto&& intersection: trimSol) {
        LC_LOG<<"RS_Arc::prepareTrim(): line "<<__LINE__<<"intersection: angle="<<getArcAngle(intersection);
    }

    if( !trimSol.hasValid() ) {
        return (RS_Vector(false));
    }
    LC_LOG<<"RS_Arc::prepareTrim(): line "<<__LINE__<<"trimCoord: angle="<<getArcAngle(trimCoord);
    if( trimSol.getNumber() == 1 ) {
        return (trimSol.get(0));
    }
    // The angle at trimCoord
    double am=getArcAngle(trimCoord);
    std::vector<double> ias;
    double ia(0.),ia2(0.);
    RS_Vector is,is2;
    //find the closest intersection to the trimCoord, according angular difference
    for (size_t ii = 0; ii < trimSol.getNumber(); ++ii) {
        ias.push_back(getArcAngle(trimSol.get(ii)));
        if (!ii || fabs(remainder(ias[ii] - am, 2 * M_PI)) < fabs(remainder(ia - am, 2 * M_PI))) {
            ia = ias[ii];
            is = trimSol.get(ii);
        }
    }
    std::sort(ias.begin(), ias.end());
    //find segment to include trimCoord
    for (size_t ii = 0; ii < trimSol.getNumber(); ++ii) {
        if (!RS_Math::isSameDirection(ia, ias[ii],RS_TOLERANCE))
            continue;
        if (RS_Math::isAngleBetween(am, ias[(ii + trimSol.getNumber() - 1) % trimSol.getNumber()], ia, false)) {
            ia2 = ias[(ii + trimSol.getNumber() - 1) % trimSol.getNumber()];
        }
        else {
            ia2 = ias[(ii + 1) % trimSol.getNumber()];
        }
        break;
    }
    LC_LOG<<"RS_Arc::prepareTrim(): line "<<__LINE__<<": angle1="<<getAngle1()<<" angle2="<<getAngle2()<<" am="<< am<<" is="<<getArcAngle(is)<<" ia2="<<ia2;
    //find segment to include trimCoord
    for(const RS_Vector& vp: trimSol) {
        if ( ! RS_Math::isSameDirection(ia2,getArcAngle(vp),RS_TOLERANCE)) continue;
        is2=vp;
        break;
    }
    double dia = fabs(remainder(ia - am, 2 * M_PI));
    double dia2 = fabs(remainder(ia2 - am, 2 * M_PI));
    double ai_min = std::min(dia, dia2);
    double da1 = fabs(remainder(getAngle1() - am, 2 * M_PI));
    double da2 = fabs(remainder(getAngle2() - am, 2 * M_PI));
    double da_min = std::min(da1, da2);
    if (da_min < ai_min) {
        //trimming one end of arc
        bool irev= RS_Math::isAngleBetween(am,ia2,ia, isReversed()) ;
        if (RS_Math::isAngleBetween(ia, getAngle1(), getAngle2(), isReversed()) &&
            RS_Math::isAngleBetween(ia2, getAngle1(), getAngle2(), isReversed())) { //
            if (irev) {
                setAngle2(ia);
                setAngle1(ia2);
                calculateBorders();
            }
            else {
                setAngle1(ia);
                setAngle2(ia2);
                calculateBorders();
            }
            da1 = fabs(remainder(getAngle1() - am, 2 * M_PI));
            da2 = fabs(remainder(getAngle2() - am, 2 * M_PI));
        }
        if (((da1 < da2 - RS_TOLERANCE_ANGLE) && (RS_Math::isAngleBetween(ia2, ia, getAngle1(), isReversed()))) ||
            ((da1 > da2 - RS_TOLERANCE_ANGLE) && (RS_Math::isAngleBetween(ia2, getAngle2(), ia, isReversed())))
        ) {
            std::swap(is, is2);
            LC_LOG << "reset: angle1=" << getAngle1() << " angle2=" << getAngle2() << " am=" << am << " is=" <<
                getArcAngle(is) << " ia2=" << ia2;
        }
    }
    else {
        //choose intersection as new end
        if (dia > dia2) {
            std::swap(is, is2);
            std::swap(ia, ia2);
        }
        if (RS_Math::isAngleBetween(ia, getAngle1(), getAngle2(), isReversed())) {
            if (std::abs(ia - getAngle1()) > RS_TOLERANCE_ANGLE && RS_Math::isAngleBetween(
                am, getAngle1(), ia, isReversed())) {
                setAngle2(ia);
            }
            else {
                setAngle1(ia);
            }
            calculateBorders();
        }
    }
    LC_LOG<<"RS_Arc::prepareTrim(): line "<<__LINE__<<": angle1="<<getAngle1()<<" angle2="<<getAngle2()<<" am="<< am<<" is="<<getArcAngle(is)<<" ia2="<<ia2;
    RS_DEBUG->print("RS_Arc::prepareTrim(): end");
    return is;
}

void RS_Arc::reverse() {
    std::swap(data.angle1,data.angle2);
    data.reversed = !data.reversed;
    calculateBorders();
}

void RS_Arc::move(const RS_Vector& offset) {
    data.center.move(offset);
    calculateBorders();
}

void RS_Arc::rotate(const RS_Vector& center, double angle) {
    RS_DEBUG->print("RS_Arc::rotate");
    data.center.rotate(center, angle);
    data.angle1 = RS_Math::correctAngle(data.angle1+angle);
    data.angle2 = RS_Math::correctAngle(data.angle2+angle);
    calculateBorders();
    RS_DEBUG->print("RS_Arc::rotate: OK");
}

void RS_Arc::rotate(const RS_Vector& center, const RS_Vector& angleVector) {
    RS_DEBUG->print("RS_Arc::rotate");
    data.center.rotate(center, angleVector);
    double angle(angleVector.angle());
    data.angle1 = RS_Math::correctAngle(data.angle1+angle);
    data.angle2 = RS_Math::correctAngle(data.angle2+angle);
    calculateBorders();
    RS_DEBUG->print("RS_Arc::rotate: OK");
}

void RS_Arc::scale(const RS_Vector& center, const RS_Vector& factor) {
    // negative scaling: mirroring
    if (factor.x<0.0) {
        mirror(data.center, data.center + RS_Vector(0.0, 1.0));
        //factor.x*=-1;
    }
    if (factor.y<0.0) {
        mirror(data.center, data.center + RS_Vector(1.0, 0.0));
        //factor.y*=-1;
    }

    data.center = data.center.scale(center, factor);
    data.radius *= factor.x;
    data.radius = fabs( data.radius );
    //todo, does this handle negative factors properly?
    calculateBorders();
}

/**
     * @description:    Implementation of the Shear/Skew the entity
     *                  The shear transform is
     *                  1  k  0
     *                  0  1  0
     *                        1
     * @author          Dongxu Li
     * @param[in] double - k the skew/shear parameter
     */
RS_Entity& RS_Arc::shear(double k){
    if (!std::isnormal(k))
        assert(!"shear(): cannot be called for arc");
    return *this;
}

void RS_Arc::mirror(const RS_Vector& axisPoint1, const RS_Vector& axisPoint2) {
    data.center.mirror(axisPoint1, axisPoint2);
    setReversed( ! isReversed() );
    double a= (axisPoint2 - axisPoint1).angle()*2;
    setAngle1(RS_Math::correctAngle(a - getAngle1()));
    setAngle2(RS_Math::correctAngle(a - getAngle2()));
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    calculateBorders();
}

void RS_Arc::moveRef(const RS_Vector& ref, const RS_Vector& offset){
//avoid moving start/end points for full circle arcs
//as start/end points coincident
    if (fabs(fabs(getAngleLength()-M_PI)-M_PI) < RS_TOLERANCE_ANGLE){
        move(offset);
        return;
    }
    auto const refs = getRefPoints();
    double dMin;
    size_t index;
    RS_Vector const vp = refs.getClosest(ref, &dMin, &index);
    if (dMin >= 1.0e-4)
        return;

//reference points must be by the order: start, end, center
//order: start, center, middle, end
    switch (index) {
        case 0: // start
            moveStartpoint(vp + offset);
            return;
        case 1: // center
            move(offset);
            return;
        case 2: // middlepoint
            moveMiddlePoint(vp + offset);
            return;
        case 3: // endpoint
            moveEndpoint(vp + offset);
            return;
        default:
            move(offset);
    }

    correctAngles(); // make sure angleLength is no more than 2*M_PI
    calculateBorders();
}

void RS_Arc::stretch(const RS_Vector& firstCorner,
                     const RS_Vector& secondCorner,
                     const RS_Vector& offset) {

    if (getMin().isInWindow(firstCorner, secondCorner) &&
        getMax().isInWindow(firstCorner, secondCorner)) {
        move(offset);
    }
    else {
        if (getStartpoint().isInWindow(firstCorner,secondCorner)) {
            moveStartpoint(getStartpoint() + offset);
        }
        if (getEndpoint().isInWindow(firstCorner,secondCorner)) {
            moveEndpoint(getEndpoint() + offset);
        }
    }
    correctAngles(); // make sure angleLength is no more than 2*M_PI
    calculateBorders();
}

void RS_Arc::draw(RS_Painter* painter) {
    painter->drawEntityArc(this);
}

/**
 * @return Middle point of the entity.
 */
RS_Vector RS_Arc::getMiddlePoint() const {
    return middlePoint;
}

/**
 * @return Angle length in rad.
 */
double RS_Arc::getAngleLength() const {
    double a = getAngle1();
    double b = getAngle2();

    if (isReversed())
        std::swap(a, b);
    double ret = RS_Math::correctAngle(b - a);
    // full circle:
    if (std::abs(std::remainder(ret, 2. * M_PI)) < RS_TOLERANCE_ANGLE) {
        ret = 2 * M_PI;
    }

    return ret;
}

/**
 * @return Length of the arc.
 */
void RS_Arc::updateLength() {
    cachedLength = getAngleLength() * data.radius;
}

/**
 * Gets the arc's bulge (tangens of angle length divided by 4).
 */
double RS_Arc::getBulge() const {
    double bulge = std::tan(std::abs(getAngleLength()) / 4.0);
    return isReversed() ? -bulge : bulge;
}

/** return the equation of the entity
for quadratic,

return a vector contains:
m0 x^2 + m1 xy + m2 y^2 + m3 x + m4 y + m5 =0

for linear:
m0 x + m1 y + m2 =0
**/
LC_Quadratic RS_Arc::getQuadratic() const {
    std::vector<double> ce(6, 0.);
    ce[0] = 1.;
    ce[2] = 1.;
    ce[5] = -data.radius * data.radius;
    LC_Quadratic ret(ce);
    ret.move(data.center);
    return ret;
}

/**
 * @brief areaLineIntegral, line integral for contour area calculation by Green's Theorem
 * Contour Area =\oint x dy
 * @return line integral \oint x dy along the entity
 * \oint x dy = c_x r \sin t + \frac{1}{4}r^2\sin 2t +  \frac{1}{2}r^2 t
 */
double RS_Arc::areaLineIntegral() const {
    const double &r = data.radius;
    const double &a0 = data.angle1;
    const double &a1 = data.angle2;
    const double r2 = 0.25 * r * r;
    const double fStart = data.center.x * r * sin(a0) + r2 * sin(a0 + a0);
    const double fEnd = data.center.x * r * sin(a1) + r2 * sin(a1 + a1);
    if (isReversed()) {
        return fEnd - fStart - 2. * r2 * getAngleLength();
    } else {
        return fEnd - fStart + 2. * r2 * getAngleLength();
    }
}

/**
 * Dumps the point's data to stdout.
 */
std::ostream& operator << (std::ostream& os, const RS_Arc& a) {
    os << " Arc: " << a.data << "\n";
    return os;
}

void RS_Arc::updateMiddlePoint() {
    double a = getAngle1();
    double b = getAngle2();

    if (isReversed()) {
        a = b + RS_Math::correctAngle(a - b) * 0.5;
    } else {
        a += RS_Math::correctAngle(b - a) * 0.5;
    }
    middlePoint =  getCenter() + RS_Vector::polar(getRadius(), a);
}

void RS_Arc::moveMiddlePoint(const RS_Vector& vector) {
    auto arc = RS_Arc(nullptr, RS_ArcData());
    bool suc = arc.createFrom3P(m_startPoint, vector,m_endPoint);
    if (suc) {
        RS_ArcData &arcData = arc.data;
        data.center = arcData.center;
        data.radius = arcData.radius;
        data.angle1 = arcData.angle1;
        data.angle2 = arcData.angle2;
        data.reversed  = arcData.reversed;
        calculateBorders();
    }
}