pip-install-ghxuqwgs/numpy_78e94bf2b6094bf9a1f3d92042f9bf46/doc/source/reference/maskedarray.generic.rst

.. currentmodule:: numpy.ma

.. _maskedarray.generic:



The :mod:`numpy.ma` module
==========================

Rationale
---------

Masked arrays are arrays that may have missing or invalid entries.
The :mod:`numpy.ma` module provides a nearly work-alike replacement for numpy
that supports data arrays with masks.



What is a masked array?
-----------------------

In many circumstances, datasets can be incomplete or tainted by the presence
of invalid data. For example, a sensor may have failed to record a data, or
recorded an invalid value. The :mod:`numpy.ma` module provides a convenient
way to address this issue, by introducing masked arrays.

A masked array is the combination of a standard :class:`numpy.ndarray` and a
mask. A mask is either :attr:`nomask`, indicating that no value of the
associated array is invalid, or an array of booleans that determines for each
element of the associated array whether the value is valid or not. When an
element of the mask is ``False``, the corresponding element of the associated
array is valid and is said to be unmasked. When an element of the mask is
``True``, the corresponding element of the associated array is said to be
masked (invalid).

The package ensures that masked entries are not used in computations.

As an illustration, let's consider the following dataset::

   >>> import numpy as np
   >>> import numpy.ma as ma
   >>> x = np.array([1, 2, 3, -1, 5])

We wish to mark the fourth entry as invalid. The easiest is to create a masked
array::

   >>> mx = ma.masked_array(x, mask=[0, 0, 0, 1, 0])

We can now compute the mean of the dataset, without taking the invalid data
into account::

   >>> mx.mean()
   2.75


The :mod:`numpy.ma` module
--------------------------


The main feature of the :mod:`numpy.ma` module is the :class:`MaskedArray`
class, which is a subclass of :class:`numpy.ndarray`. The class, its
attributes and methods are described in more details in the
:ref:`MaskedArray class <maskedarray.baseclass>` section.

The :mod:`numpy.ma` module can be used as an addition to :mod:`numpy`: ::

   >>> import numpy as np
   >>> import numpy.ma as ma

To create an array with the second element invalid, we would do::

   >>> y = ma.array([1, 2, 3], mask = [0, 1, 0])

To create a masked array where all values close to 1.e20 are invalid, we would
do::

   >>> z = masked_values([1.0, 1.e20, 3.0, 4.0], 1.e20)

For a complete discussion of creation methods for masked arrays please see
section :ref:`Constructing masked arrays <maskedarray.generic.constructing>`.




Using numpy.ma
==============

.. _maskedarray.generic.constructing:

Constructing masked arrays
--------------------------

There are several ways to construct a masked array.

* A first possibility is to directly invoke the :class:`MaskedArray` class.

* A second possibility is to use the two masked array constructors,
  :func:`array` and :func:`masked_array`.

  .. autosummary::
     :toctree: generated/

     array
     masked_array


* A third option is to take the view of an existing array. In that case, the
  mask of the view is set to :attr:`nomask` if the array has no named fields,
  or an array of boolean with the same structure as the array otherwise.

     >>> x = np.array([1, 2, 3])
     >>> x.view(ma.MaskedArray)
     masked_array(data = [1 2 3],
                  mask = False,
            fill_value = 999999)
     >>> x = np.array([(1, 1.), (2, 2.)], dtype=[('a',int), ('b', float)])
     >>> x.view(ma.MaskedArray)
     masked_array(data = [(1, 1.0) (2, 2.0)],
                  mask = [(False, False) (False, False)],
            fill_value = (999999, 1e+20),
                 dtype = [('a', '<i4'), ('b', '<f8')])

* Yet another possibility is to use any of the following functions:

  .. autosummary::
     :toctree: generated/

     asarray
     asanyarray
     fix_invalid
     masked_equal
     masked_greater
     masked_greater_equal
     masked_inside
     masked_invalid
     masked_less
     masked_less_equal
     masked_not_equal
     masked_object
     masked_outside
     masked_values
     masked_where



Accessing the data
------------------

The underlying data of a masked array can be accessed in several ways:

* through the :attr:`~MaskedArray.data` attribute. The output is a view of the
  array as a :class:`numpy.ndarray` or one of its subclasses, depending on the
  type of the underlying data at the masked array creation.

* through the :meth:`~MaskedArray.__array__` method. The output is then a
  :class:`numpy.ndarray`.

* by directly taking a view of the masked array as a :class:`numpy.ndarray`
  or one of its subclass (which is actually what using the
  :attr:`~MaskedArray.data` attribute does).

* by using the :func:`getdata` function.


None of these methods is completely satisfactory if some entries have been
marked as invalid. As a general rule, where a representation of the array is
required without any masked entries, it is recommended to fill the array with
the :meth:`filled` method.



Accessing the mask
------------------

The mask of a masked array is accessible through its :attr:`~MaskedArray.mask`
attribute. We must keep in mind that a ``True`` entry in the mask indicates an
*invalid* data.

Another possibility is to use the :func:`getmask` and :func:`getmaskarray`
functions. :func:`getmask(x)` outputs the mask of ``x`` if ``x`` is a masked
array, and the special value :data:`nomask` otherwise. :func:`getmaskarray(x)`
outputs the mask of ``x`` if ``x`` is a masked array. If ``x`` has no invalid
entry or is not a masked array, the function outputs  a boolean array of
``False`` with as many elements as ``x``.




Accessing only the valid entries
---------------------------------

To retrieve only the valid entries, we can use the inverse of the mask as an
index. The inverse of the mask can be calculated with the
:func:`numpy.logical_not` function or simply with the ``~`` operator::

   >>> x = ma.array([[1, 2], [3, 4]], mask=[[0, 1], [1, 0]])
   >>> x[~x.mask]
   masked_array(data = [1 4],
                mask = [False False],
          fill_value = 999999)

Another way to retrieve the valid data is to use the :meth:`compressed`
method, which returns a one-dimensional :class:`~numpy.ndarray` (or one of its
subclasses, depending on the value of the :attr:`~MaskedArray.baseclass`
attribute)::

   >>> x.compressed()
   array([1, 4])

Note that the output of :meth:`compressed` is always 1D.



Modifying the mask
------------------

Masking an entry
~~~~~~~~~~~~~~~~

The recommended way to mark one or several specific entries of a masked array
as invalid is to assign the special value :attr:`masked` to them::

   >>> x = ma.array([1, 2, 3])
   >>> x[0] = ma.masked
   >>> x
   masked_array(data = [-- 2 3],
                mask = [ True False False],
          fill_value = 999999)
   >>> y = ma.array([[1, 2, 3], [4, 5, 6], [7, 8, 9]])
   >>> y[(0, 1, 2), (1, 2, 0)] = ma.masked
   >>> y
   masked_array(data =
    [[1 -- 3]
     [4 5 --]
     [-- 8 9]],
                mask =
    [[False  True False]
     [False False  True]
     [ True False False]],
          fill_value = 999999)
   >>> z = ma.array([1, 2, 3, 4])
   >>> z[:-2] = ma.masked
   >>> z
   masked_array(data = [-- -- 3 4],
                mask = [ True  True False False],
          fill_value = 999999)


A second possibility is to modify the :attr:`~MaskedArray.mask` directly,
but this usage is discouraged.

.. note::
   When creating a new masked array with a simple, non-structured datatype,
   the mask is initially set to the special value :attr:`nomask`, that
   corresponds roughly to the boolean ``False``. Trying to set an element of
   :attr:`nomask` will fail with a :exc:`TypeError` exception, as a boolean
   does not support item assignment.


All the entries of an array can be masked at once by assigning ``True`` to the
mask::

   >>> x = ma.array([1, 2, 3], mask=[0, 0, 1])
   >>> x.mask = True
   >>> x
   masked_array(data = [-- -- --],
                mask = [ True  True  True],
          fill_value = 999999)

Finally, specific entries can be masked and/or unmasked by assigning to the
mask a sequence of booleans::

   >>> x = ma.array([1, 2, 3])
   >>> x.mask = [0, 1, 0]
   >>> x
   masked_array(data = [1 -- 3],
                mask = [False  True False],
          fill_value = 999999)

Unmasking an entry
~~~~~~~~~~~~~~~~~~

To unmask one or several specific entries, we can just assign one or several
new valid values to them::

   >>> x = ma.array([1, 2, 3], mask=[0, 0, 1])
   >>> x
   masked_array(data = [1 2 --],
                mask = [False False  True],
          fill_value = 999999)
   >>> x[-1] = 5
   >>> x
   masked_array(data = [1 2 5],
                mask = [False False False],
          fill_value = 999999)

.. note::
   Unmasking an entry by direct assignment will silently fail if the masked
   array has a *hard* mask, as shown by the :attr:`hardmask` attribute. This
   feature was introduced to prevent overwriting the mask. To force the
   unmasking of an entry where the array has a hard mask, the mask must first
   to be softened using the :meth:`soften_mask` method before the allocation.
   It can be re-hardened with :meth:`harden_mask`::

      >>> x = ma.array([1, 2, 3], mask=[0, 0, 1], hard_mask=True)
      >>> x
      masked_array(data = [1 2 --],
                   mask = [False False  True],
             fill_value = 999999)
      >>> x[-1] = 5
      >>> x
      masked_array(data = [1 2 --],
                   mask = [False False  True],
             fill_value = 999999)
      >>> x.soften_mask()
      >>> x[-1] = 5
      >>> x
      masked_array(data = [1 2 5],
                   mask = [False False  False],
             fill_value = 999999)
      >>> x.harden_mask()


To unmask all masked entries of a masked array (provided the mask isn't a hard
mask), the simplest solution is to assign the constant :attr:`nomask` to the
mask::

   >>> x = ma.array([1, 2, 3], mask=[0, 0, 1])
   >>> x
   masked_array(data = [1 2 --],
                mask = [False False  True],
          fill_value = 999999)
   >>> x.mask = ma.nomask
   >>> x
   masked_array(data = [1 2 3],
                mask = [False False False],
          fill_value = 999999)



Indexing and slicing
--------------------

As a :class:`MaskedArray` is a subclass of :class:`numpy.ndarray`, it inherits
its mechanisms for indexing and slicing.

When accessing a single entry of a masked array with no named fields, the
output is either a scalar (if the corresponding entry of the mask is
``False``) or the special value :attr:`masked` (if the corresponding entry of
the mask is ``True``)::

   >>> x = ma.array([1, 2, 3], mask=[0, 0, 1])
   >>> x[0]
   1
   >>> x[-1]
   masked_array(data = --,
                mask = True,
          fill_value = 1e+20)
   >>> x[-1] is ma.masked
   True

If the masked array has named fields, accessing a single entry returns a
:class:`numpy.void` object if none of the fields are masked, or a 0d masked
array with the same dtype as the initial array if at least one of the fields
is masked.

   >>> y = ma.masked_array([(1,2), (3, 4)],
   ...                mask=[(0, 0), (0, 1)],
   ...               dtype=[('a', int), ('b', int)])
   >>> y[0]
   (1, 2)
   >>> y[-1]
   masked_array(data = (3, --),
                mask = (False, True),
          fill_value = (999999, 999999),
               dtype = [('a', '<i4'), ('b', '<i4')])


When accessing a slice, the output is a masked array whose
:attr:`~MaskedArray.data` attribute is a view of the original data, and whose
mask is either :attr:`nomask` (if there was no invalid entries in the original
array) or a copy of the corresponding slice of the original mask. The copy is
required to avoid propagation of any modification of the mask to the original.

   >>> x = ma.array([1, 2, 3, 4, 5], mask=[0, 1, 0, 0, 1])
   >>> mx = x[:3]
   >>> mx
   masked_array(data = [1 -- 3],
                mask = [False  True False],
          fill_value = 999999)
   >>> mx[1] = -1
   >>> mx
   masked_array(data = [1 -1 3],
                mask = [False  True False],
          fill_value = 999999)
   >>> x.mask
   array([False,  True, False, False,  True], dtype=bool)
   >>> x.data
   array([ 1, -1,  3,  4,  5])


Accessing a field of a masked array with structured datatype returns a
:class:`MaskedArray`.

Operations on masked arrays
---------------------------

Arithmetic and comparison operations are supported by masked arrays.
As much as possible, invalid entries of a masked array are not processed,
meaning that the corresponding :attr:`data` entries *should* be the same
before and after the operation.

.. warning::
   We need to stress that this behavior may not be systematic, that masked
   data may be affected by the operation in some cases and therefore users
   should not rely on this data remaining unchanged.

The :mod:`numpy.ma` module comes with a specific implementation of most
ufuncs. Unary and binary functions that have a validity domain (such as
:func:`~numpy.log` or :func:`~numpy.divide`) return the :data:`masked`
constant whenever the input is masked or falls outside the validity domain::

   >>> ma.log([-1, 0, 1, 2])
   masked_array(data = [-- -- 0.0 0.69314718056],
                mask = [ True  True False False],
          fill_value = 1e+20)

Masked arrays also support standard numpy ufuncs. The output is then a masked
array. The result of a unary ufunc is masked wherever the input is masked. The
result of a binary ufunc is masked wherever any of the input is masked. If the
ufunc also returns the optional context output (a 3-element tuple containing
the name of the ufunc, its arguments and its domain), the context is processed
and entries of the output masked array are masked wherever the corresponding
input fall outside the validity domain::

   >>> x = ma.array([-1, 1, 0, 2, 3], mask=[0, 0, 0, 0, 1])
   >>> np.log(x)
   masked_array(data = [-- -- 0.0 0.69314718056 --],
                mask = [ True  True False False  True],
          fill_value = 1e+20)



Examples
========

Data with a given value representing missing data
-------------------------------------------------

Let's consider a list of elements, ``x``, where values of -9999. represent
missing data. We wish to compute the average value of the data and the vector
of anomalies (deviations from the average)::

   >>> import numpy.ma as ma
   >>> x = [0.,1.,-9999.,3.,4.]
   >>> mx = ma.masked_values (x, -9999.)
   >>> print mx.mean()
   2.0
   >>> print mx - mx.mean()
   [-2.0 -1.0 -- 1.0 2.0]
   >>> print mx.anom()
   [-2.0 -1.0 -- 1.0 2.0]


Filling in the missing data
---------------------------

Suppose now that we wish to print that same data, but with the missing values
replaced by the average value.

   >>> print mx.filled(mx.mean())
   [ 0.  1.  2.  3.  4.]


Numerical operations
--------------------

Numerical operations can be easily performed without worrying about missing
values, dividing by zero, square roots of negative numbers, etc.::

   >>> import numpy as np, numpy.ma as ma
   >>> x = ma.array([1., -1., 3., 4., 5., 6.], mask=[0,0,0,0,1,0])
   >>> y = ma.array([1., 2., 0., 4., 5., 6.], mask=[0,0,0,0,0,1])
   >>> print np.sqrt(x/y)
   [1.0 -- -- 1.0 -- --]

Four values of the output are invalid: the first one comes from taking the
square root of a negative number, the second from the division by zero, and
the last two where the inputs were masked.


Ignoring extreme values
-----------------------

Let's consider an array ``d`` of random floats between 0 and 1. We wish to
compute the average of the values of ``d`` while ignoring any data outside
the range ``[0.1, 0.9]``::

   >>> print ma.masked_outside(d, 0.1, 0.9).mean()