share/info/mpfr.info

This is mpfr.info, produced by makeinfo version 7.0.3 from mpfr.texi.

This manual documents how to install and use the Multiple Precision
Floating-Point Reliable Library, version 4.2.1.

   Copyright 1991, 1993-2023 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts.  A copy of the license is included in *note GNU Free
Documentation License::.
INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* mpfr: (mpfr).                 Multiple Precision Floating-Point Reliable Library.
END-INFO-DIR-ENTRY


File: mpfr.info,  Node: Top,  Next: Copying,  Prev: (dir),  Up: (dir)

GNU MPFR
********

This manual documents how to install and use the Multiple Precision
Floating-Point Reliable Library, version 4.2.1.

   Copyright 1991, 1993-2023 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts.  A copy of the license is included in *note GNU Free
Documentation License::.

* Menu:

* Copying::                     MPFR Copying Conditions (LGPL).
* Introduction to MPFR::        Brief introduction to GNU MPFR.
* Installing MPFR::             How to configure and compile the MPFR library.
* Reporting Bugs::              How to usefully report bugs.
* MPFR Basics::                 What every MPFR user should now.
* MPFR Interface::              MPFR functions and macros.
* API Compatibility::           API compatibility with previous MPFR versions.
* MPFR and the IEEE 754 Standard::
* Contributors::
* References::
* GNU Free Documentation License::
* Concept Index::
* Function and Type Index::


File: mpfr.info,  Node: Copying,  Next: Introduction to MPFR,  Prev: Top,  Up: Top

MPFR Copying Conditions
***********************

The GNU MPFR library (or MPFR for short) is “free”; this means that
everyone is free to use it and free to redistribute it on a free basis.
The library is not in the public domain; it is copyrighted and there are
restrictions on its distribution, but these restrictions are designed to
permit everything that a good cooperating citizen would want to do.
What is not allowed is to try to prevent others from further sharing any
version of this library that they might get from you.

   Specifically, we want to make sure that you have the right to give
away copies of the library, that you receive source code or else can get
it if you want it, that you can change this library or use pieces of it
in new free programs, and that you know you can do these things.

   To make sure that everyone has such rights, we have to forbid you to
deprive anyone else of these rights.  For example, if you distribute
copies of the GNU MPFR library, you must give the recipients all the
rights that you have.  You must make sure that they, too, receive or can
get the source code.  And you must tell them their rights.

   Also, for our own protection, we must make certain that everyone
finds out that there is no warranty for the GNU MPFR library.  If it is
modified by someone else and passed on, we want their recipients to know
that what they have is not what we distributed, so that any problems
introduced by others will not reflect on our reputation.

   The precise conditions of the license for the GNU MPFR library are
found in the Lesser General Public License that accompanies the source
code.  See the file COPYING.LESSER..


File: mpfr.info,  Node: Introduction to MPFR,  Next: Installing MPFR,  Prev: Copying,  Up: Top

1 Introduction to MPFR
**********************

MPFR is a portable library written in C for arbitrary precision
arithmetic on floating-point numbers.  It is based on the GNU MP
library.  It aims to provide a class of floating-point numbers with
precise semantics.  The main characteristics of MPFR, which make it
differ from most arbitrary precision floating-point software tools, are:

   • the MPFR code is portable, i.e., the result of any operation does
     not depend on the machine word size ‘mp_bits_per_limb’ (64 on most
     current processors), possibly except in faithful rounding.  It does
     not depend either on the machine rounding mode or rounding
     precision;

   • the precision in bits can be set _exactly_ to any valid value for
     each variable (including very small precision);

   • MPFR provides the four rounding modes from the IEEE 754-1985
     standard, plus away-from-zero, as well as for basic operations as
     for other mathematical functions.  Faithful rounding (partially
     supported) is provided too, but the results may no longer be
     reproducible.

   In particular, MPFR follows the specification of the IEEE 754
standard, currently IEEE 754-2019 (which will be referred to as IEEE 754
in this manual), with some minor differences, such as: there is a single
NaN, the default exponent range is much wider, and subnormal numbers are
not implemented (but the exponent range can be reduced to any interval,
and subnormals can be emulated).  For instance, computations in the
binary64 format (a.k.a. double precision) can be reproduced by using a
precision of 53 bits.

   This version of MPFR is released under the GNU Lesser General Public
License, version 3 or any later version.  It is permitted to link MPFR
to most non-free programs, as long as when distributing them the MPFR
source code and a means to re-link with a modified MPFR library is
provided.

1.1 How to Use This Manual
==========================

Everyone should read *note MPFR Basics::.  If you need to install the
library yourself, you need to read *note Installing MPFR::, too.  To use
the library you will need to refer to *note MPFR Interface::.

   The rest of the manual can be used for later reference, although it
is probably a good idea to glance through it.


File: mpfr.info,  Node: Installing MPFR,  Next: Reporting Bugs,  Prev: Introduction to MPFR,  Up: Top

2 Installing MPFR
*****************

The MPFR library is already installed on some GNU/Linux distributions,
but the development files necessary to the compilation such as ‘mpfr.h’
are not always present.  To check that MPFR is fully installed on your
computer, you can check the presence of the file ‘mpfr.h’ in
‘/usr/include’, or try to compile a small program having ‘#include
<mpfr.h>’ (since ‘mpfr.h’ may be installed somewhere else).  For
instance, you can try to compile:

     #include <stdio.h>
     #include <mpfr.h>
     int main (void)
     {
       printf ("MPFR library: %-12s\nMPFR header:  %s (based on %d.%d.%d)\n",
               mpfr_get_version (), MPFR_VERSION_STRING, MPFR_VERSION_MAJOR,
               MPFR_VERSION_MINOR, MPFR_VERSION_PATCHLEVEL);
       return 0;
     }

with

     cc -o version version.c -lmpfr -lgmp

and if you get errors whose first line looks like

     version.c:2:19: error: mpfr.h: No such file or directory

then MPFR is probably not installed.  Running this program will give you
the MPFR version.

   If MPFR is not installed on your computer, or if you want to install
a different version, please follow the steps below.

2.1 How to Install
==================

Here are the steps needed to install the library on Unix systems (more
details are provided in the ‘INSTALL’ file):

  1. To build MPFR, you first have to install GNU MP (version 5.0.0 or
     higher) on your computer.  You need a C compiler, preferably GCC,
     but any reasonable compiler should work (C++ compilers should work
     too, under the condition that they do not break type punning via
     union).  And you need the standard Unix ‘make’ command, plus some
     other standard Unix utility commands.

     Then, in the MPFR build directory, type the following commands.

  2. ‘./configure’

     This will prepare the build and set up the options according to
     your system.  You can give options to specify the install
     directories (instead of the default ‘/usr/local’), threading
     support, and so on.  See the ‘INSTALL’ file and/or the output of
     ‘./configure --help’ for more information, in particular if you get
     error messages.

  3. ‘make’

     This will compile MPFR, and create a library archive file
     ‘libmpfr.a’.  On most platforms, a dynamic library will be produced
     too.

  4. ‘make check’

     This will make sure that MPFR was built correctly.  If any test
     fails, information about this failure can be found in the
     ‘tests/test-suite.log’ file.  If you want the contents of this file
     to be automatically output in case of failure, you can set the
     ‘VERBOSE’ environment variable to 1 before running ‘make check’,
     for instance by typing:

     ‘VERBOSE=1 make check’

     In case of failure, you may want to check whether the problem is
     already known.  If not, please report this failure to the MPFR
     mailing-list ‘mpfr@inria.fr’.  For details, see *note Reporting
     Bugs::.

  5. ‘make install’

     This will copy the files ‘mpfr.h’ and ‘mpf2mpfr.h’ to the directory
     ‘/usr/local/include’, the library files (‘libmpfr.a’ and possibly
     others) to the directory ‘/usr/local/lib’, the file ‘mpfr.info’ to
     the directory ‘/usr/local/share/info’, and some other documentation
     files to the directory ‘/usr/local/share/doc/mpfr’ (or if you
     passed the ‘--prefix’ option to ‘configure’, using the prefix
     directory given as argument to ‘--prefix’ instead of ‘/usr/local’).

2.2 Other ‘make’ Targets
========================

There are some other useful make targets:

   • ‘mpfr.info’ or ‘info’

     Create or update an info version of the manual, in ‘mpfr.info’.

     This file is already provided in the MPFR archives.

   • ‘mpfr.pdf’ or ‘pdf’

     Create a PDF version of the manual, in ‘mpfr.pdf’.

   • ‘mpfr.dvi’ or ‘dvi’

     Create a DVI version of the manual, in ‘mpfr.dvi’.

   • ‘mpfr.ps’ or ‘ps’

     Create a PostScript version of the manual, in ‘mpfr.ps’.

   • ‘mpfr.html’ or ‘html’

     Create a HTML version of the manual, in several pages in the
     directory ‘doc/mpfr.html’; if you want only one output HTML file,
     then type ‘makeinfo --html --no-split mpfr.texi’ from the ‘doc’
     directory instead.

   • ‘clean’

     Delete all object files and archive files, but not the
     configuration files.

   • ‘distclean’

     Delete all generated files not included in the distribution.

   • ‘uninstall’

     Delete all files copied by ‘make install’.

2.3 Build Problems
==================

In case of problem, please read the ‘INSTALL’ file carefully before
reporting a bug, in particular section “In case of problem”.  Some
problems are due to bad configuration on the user side (not specific to
MPFR).  Problems are also mentioned in the FAQ
<https://www.mpfr.org/faq.html>.

   Please report problems to the MPFR mailing-list ‘mpfr@inria.fr’.
*Note Reporting Bugs::.  Some bug fixes are available on the MPFR 4.2.1
web page <https://www.mpfr.org/mpfr-4.2.1/>.

2.4 Getting the Latest Version of MPFR
======================================

The latest version of MPFR is available from
<https://ftp.gnu.org/gnu/mpfr/> or <https://www.mpfr.org/>.


File: mpfr.info,  Node: Reporting Bugs,  Next: MPFR Basics,  Prev: Installing MPFR,  Up: Top

3 Reporting Bugs
****************

If you think you have found a bug in the MPFR library, first have a look
on the MPFR 4.2.1 web page <https://www.mpfr.org/mpfr-4.2.1/> and the
FAQ <https://www.mpfr.org/faq.html>: perhaps this bug is already known,
in which case you may find there a workaround for it.  You might also
look in the archives of the MPFR mailing-list:
<https://sympa.inria.fr/sympa/arc/mpfr>.  Otherwise, please investigate
and report it.  We have made this library available to you, and it is
not to ask too much from you to ask you to report the bugs that you
find.

   There are a few things you should think about when you put your bug
report together.

   You have to send us a test case that makes it possible for us to
reproduce the bug, i.e., a small self-content program, using no other
library than MPFR.  Include instructions on how to run the test case.

   You also have to explain what is wrong; if you get a crash, or if the
results you get are incorrect and in that case, in what way.

   Please include compiler version information in your bug report.  This
can be extracted using ‘cc -V’ on some machines, or, if you are using
GCC, ‘gcc -v’.  Also, include the output from ‘uname -a’ and the MPFR
version (the GMP version may be useful too).  If you get a failure while
running ‘make’ or ‘make check’, please include the ‘config.log’ file in
your bug report, and in case of test failure, the ‘tests/test-suite.log’
file too.

   If your bug report is good, we will do our best to help you to get a
corrected version of the library; if the bug report is poor, we will not
do anything about it (aside of chiding you to send better bug reports).

   Send your bug report to the MPFR mailing-list ‘mpfr@inria.fr’.

   If you think something in this manual is unclear, or downright
incorrect, or if the language needs to be improved, please send a note
to the same address.


File: mpfr.info,  Node: MPFR Basics,  Next: MPFR Interface,  Prev: Reporting Bugs,  Up: Top

4 MPFR Basics
*************

* Menu:

* Headers and Libraries::
* Nomenclature and Types::
* MPFR Variable Conventions::
* Rounding::
* Floating-Point Values on Special Numbers::
* Exceptions::
* Memory Handling::
* Getting the Best Efficiency Out of MPFR::


File: mpfr.info,  Node: Headers and Libraries,  Next: Nomenclature and Types,  Prev: MPFR Basics,  Up: MPFR Basics

4.1 Headers and Libraries
=========================

All declarations needed to use MPFR are collected in the include file
‘mpfr.h’.  It is designed to work with both C and C++ compilers.  You
should include that file in any program using the MPFR library:

     #include <mpfr.h>

   Note, however, that prototypes for MPFR functions with ‘FILE *’
parameters are provided only if ‘<stdio.h>’ is included too (before
‘mpfr.h’):

     #include <stdio.h>
     #include <mpfr.h>

   Likewise ‘<stdarg.h>’ (or ‘<varargs.h>’) is required for prototypes
with ‘va_list’ parameters, such as ‘mpfr_vprintf’.

   And for any functions using ‘intmax_t’, you must include ‘<stdint.h>’
or ‘<inttypes.h>’ before ‘mpfr.h’, to allow ‘mpfr.h’ to define
prototypes for these functions.  Moreover, under some platforms (in
particular with C++ compilers), users may need to define
‘MPFR_USE_INTMAX_T’ (and should do it for portability) before ‘mpfr.h’
has been included; of course, it is possible to do that on the command
line, e.g., with ‘-DMPFR_USE_INTMAX_T’.

   Note: If ‘mpfr.h’ and/or ‘gmp.h’ (used by ‘mpfr.h’) are included
several times (possibly from another header file), ‘<stdio.h>’ and/or
‘<stdarg.h>’ (or ‘<varargs.h>’) should be included *before the first
inclusion* of ‘mpfr.h’ or ‘gmp.h’.  Alternatively, you can define
‘MPFR_USE_FILE’ (for MPFR I/O functions) and/or ‘MPFR_USE_VA_LIST’ (for
MPFR functions with ‘va_list’ parameters) anywhere before the last
inclusion of ‘mpfr.h’.  As a consequence, if your file is a public
header that includes ‘mpfr.h’, you need to use the latter method.

   When calling a MPFR macro, it is not allowed to have previously
defined a macro with the same name as some keywords (currently ‘do’,
‘while’ and ‘sizeof’).

   You can avoid the use of MPFR macros encapsulating functions by
defining the ‘MPFR_USE_NO_MACRO’ macro before ‘mpfr.h’ is included.  In
general this should not be necessary, but this can be useful when
debugging user code: with some macros, the compiler may emit spurious
warnings with some warning options, and macros can prevent some
prototype checking.

   All programs using MPFR must link against both ‘libmpfr’ and ‘libgmp’
libraries.  On a typical Unix-like system this can be done with ‘-lmpfr
-lgmp’ (in that order), for example:

     gcc myprogram.c -lmpfr -lgmp

   MPFR is built using Libtool and an application can use that to link
if desired, *note GNU Libtool: (libtool)Top.

   If MPFR has been installed to a non-standard location, then it may be
necessary to set up environment variables such as ‘C_INCLUDE_PATH’ and
‘LIBRARY_PATH’, or use ‘-I’ and ‘-L’ compiler options, in order to point
to the right directories.  For a shared library, it may also be
necessary to set up some sort of run-time library path (e.g.,
‘LD_LIBRARY_PATH’) on some systems.  Please read the ‘INSTALL’ file for
additional information.

   Alternatively, it is possible to use ‘pkg-config’ (a file ‘mpfr.pc’
is provided as of MPFR 4.0):

     cc myprogram.c $(pkg-config --cflags --libs mpfr)

   Note that the ‘MPFR_’ and ‘mpfr_’ prefixes are reserved for MPFR.  As
a general rule, in order to avoid clashes, software using MPFR (directly
or indirectly) and system headers/libraries should not define macros and
symbols using these prefixes.


File: mpfr.info,  Node: Nomenclature and Types,  Next: MPFR Variable Conventions,  Prev: Headers and Libraries,  Up: MPFR Basics

4.2 Nomenclature and Types
==========================

A “floating-point number”, or “float” for short, is an object
representing a radix-2 floating-point number consisting of a sign, an
arbitrary-precision normalized significand (also called mantissa), and
an exponent (an integer in some given range); these are called “regular
numbers”.  By convention, the radix point of the significand is just
before the first digit (which is always 1 due to normalization), like in
the C language, but unlike in IEEE 754 (thus, for a given number, the
exponent values in MPFR and in IEEE 754 differ by 1).

   Like in the IEEE 754 standard, a floating-point number can also have
three kinds of special values: a signed zero (+0 or −0), a signed
infinity (+Inf or −Inf), and Not-a-Number (NaN).  NaN can represent the
default value of a floating-point object and the result of some
operations for which no other results would make sense, such as 0
divided by 0 or +Inf minus +Inf; unless documented otherwise, the sign
bit of a NaN is unspecified.  Note that contrary to IEEE 754, MPFR has a
single kind of NaN and does not have subnormals.  Other than that, the
behavior is very similar to IEEE 754, but there are some minor
differences.

   The C data type for such objects is ‘mpfr_t’, internally defined as a
one-element array of a structure (so that when passed as an argument to
a function, it is the pointer that is actually passed), and ‘mpfr_ptr’
is the C data type representing a pointer to this structure;
‘mpfr_srcptr’ is like ‘mpfr_ptr’, but the structure is read-only (i.e.,
const qualified).

   The “precision” is the number of bits used to represent the
significand of a floating-point number; the corresponding C data type is
‘mpfr_prec_t’.  The precision can be any integer between ‘MPFR_PREC_MIN’
and ‘MPFR_PREC_MAX’.  In the current implementation, ‘MPFR_PREC_MIN’ is
equal to 1.

   Warning!  MPFR needs to increase the precision internally, in order
to provide accurate results (and in particular, correct rounding).  Do
not attempt to set the precision to any value near ‘MPFR_PREC_MAX’,
otherwise MPFR will abort due to an assertion failure.  However, in
practice, the real limitation will probably be the available memory on
your platform, and in case of lack of memory, the program may abort,
crash or have undefined behavior (depending on your C implementation).

   An “exponent” is a component of a regular floating-point number.  Its
C data type is ‘mpfr_exp_t’.  Valid exponents are restricted to a subset
of this type, and the exponent range can be changed globally as
described in *note Exception Related Functions::.  Special values do not
have an exponent.

   The “rounding mode” specifies the way to round the result of a
floating-point operation, in case the exact result cannot be represented
exactly in the destination (*note Rounding::).  The corresponding C data
type is ‘mpfr_rnd_t’.

   MPFR has a global (or per-thread) flag for each supported exception
and provides operations on flags (*note Exceptions::).  This C data type
is used to represent a group of flags (or a mask).


File: mpfr.info,  Node: MPFR Variable Conventions,  Next: Rounding,  Prev: Nomenclature and Types,  Up: MPFR Basics

4.3 MPFR Variable Conventions
=============================

Before you can assign to a MPFR variable, you need to initialize it by
calling one of the special initialization functions.  When you are done
with a variable, you need to clear it out, using one of the functions
for that purpose.  A variable should only be initialized once, or at
least cleared out between each initialization.  After a variable has
been initialized, it may be assigned to any number of times.  For
efficiency reasons, avoid to initialize and clear out a variable in
loops.  Instead, initialize it before entering the loop, and clear it
out after the loop has exited.  You do not need to be concerned about
allocating additional space for MPFR variables, since any variable has a
significand of fixed size.  Hence unless you change its precision, or
clear and reinitialize it, a floating-point variable will have the same
allocated space during all its life.

   As a general rule, all MPFR functions expect output arguments before
input arguments.  This notation is based on an analogy with the
assignment operator.  MPFR allows you to use the same variable for both
input and output in the same expression.  For example, the main function
for floating-point multiplication, ‘mpfr_mul’, can be used like this:
‘mpfr_mul (x, x, x, rnd)’.  This computes the square of X with rounding
mode ‘rnd’ and puts the result back in X.


File: mpfr.info,  Node: Rounding,  Next: Floating-Point Values on Special Numbers,  Prev: MPFR Variable Conventions,  Up: MPFR Basics

4.4 Rounding
============

The following rounding modes are supported:

   • ‘MPFR_RNDN’: round to nearest, with the even rounding rule
     (roundTiesToEven in IEEE 754); see details below.

   • ‘MPFR_RNDD’: round toward negative infinity (roundTowardNegative in
     IEEE 754).

   • ‘MPFR_RNDU’: round toward positive infinity (roundTowardPositive in
     IEEE 754).

   • ‘MPFR_RNDZ’: round toward zero (roundTowardZero in IEEE 754).

   • ‘MPFR_RNDA’: round away from zero.

   • ‘MPFR_RNDF’: faithful rounding.  This feature is currently
     experimental.  Specific support for this rounding mode has been
     added to some functions, such as the basic operations (addition,
     subtraction, multiplication, square, division, square root) or when
     explicitly documented.  It might also work with other functions, as
     it is possible that they do not need modification in their code;
     even though a correct behavior is not guaranteed yet (corrections
     were done when failures occurred in the test suite, but almost
     nothing has been checked manually), failures should be regarded as
     bugs and reported, so that they can be fixed.

   Note that, in particular for a result equal to zero, the sign is
preserved by the rounding operation.

   The ‘MPFR_RNDN’ mode works like roundTiesToEven from the IEEE 754
standard: in case the number to be rounded lies exactly in the middle
between two consecutive representable numbers, it is rounded to the one
with an even significand; in radix 2, this means that the least
significant bit is 0.  For example, the number 2.5, which is represented
by (10.1) in binary, is rounded to (10.0) = 2 with a precision of two
bits, and not to (11.0) = 3.  This rule avoids the “drift” phenomenon
mentioned by Knuth in volume 2 of The Art of Computer Programming
(Section 4.2.2).

   Note: In particular for a 1-digit precision (in radix 2 or other
radices, as in conversions to a string of digits), one considers the
significands associated with the exponent of the number to be rounded.
For instance, to round the number 95 in radix 10 with a 1-digit
precision, one considers its truncated 1-digit integer significand 9 and
the following integer 10 (since these are consecutive integers, exactly
one of them is even).  10 is the even significand, so that 95 will be
rounded to 100, not to 90.

   For the “directed rounding modes”, a number X is rounded to the
number Y that is the closest to X such that
   • ‘MPFR_RNDD’: Y is less than or equal to X;
   • ‘MPFR_RNDU’: Y is greater than or equal to X;
   • ‘MPFR_RNDZ’: abs(Y) is less than or equal to abs(X);
   • ‘MPFR_RNDA’: abs(Y) is greater than or equal to abs(X).

   The ‘MPFR_RNDF’ mode works as follows: the computed value is either
that corresponding to ‘MPFR_RNDD’ or that corresponding to ‘MPFR_RNDU’.
In particular when those values are identical, i.e., when the result of
the corresponding operation is exactly representable, that exact result
is returned.  Thus, the computed result can take at most two possible
values, and in absence of underflow/overflow, the corresponding error is
strictly less than one ulp (unit in the last place) of that result and
of the exact result.  For ‘MPFR_RNDF’, the ternary value (defined below)
and the inexact flag (defined later, as with the other flags) are
unspecified, the divide-by-zero flag is as with other roundings, and the
underflow and overflow flags match what would be obtained in the case
the computed value is the same as with ‘MPFR_RNDD’ or ‘MPFR_RNDU’.  The
results may not be reproducible.

   Most MPFR functions take as first argument the destination variable,
as second and following arguments the input variables, as last argument
a rounding mode, and have a return value of type ‘int’, called the
“ternary value”.  The value stored in the destination variable is
correctly rounded, i.e., MPFR behaves as if it computed the result with
an infinite precision, then rounded it to the precision of this
variable.  The input variables are regarded as exact (in particular,
their precision does not affect the result).

   As a consequence, in case of a non-zero real rounded result, the
error on the result is less than or equal to 1/2 ulp (unit in the last
place) of that result in the rounding to nearest mode, and less than 1
ulp of that result in the directed rounding modes (a ulp is the weight
of the least significant represented bit of the result after rounding).

   Unless documented otherwise, functions returning an ‘int’ return a
ternary value.  If the ternary value is zero, it means that the value
stored in the destination variable is the exact result of the
corresponding mathematical function.  If the ternary value is positive
(resp. negative), it means the value stored in the destination variable
is greater (resp. lower) than the exact result.  For example with the
‘MPFR_RNDU’ rounding mode, the ternary value is usually positive, except
when the result is exact, in which case it is zero.  In the case of an
infinite result, it is considered as inexact when it was obtained by
overflow, and exact otherwise.  A NaN result (Not-a-Number) always
corresponds to an exact return value.  The opposite of a returned
ternary value is guaranteed to be representable in an ‘int’.

   Unless documented otherwise, functions returning as result the value
‘1’ (or any other value specified in this manual) for special cases
(like ‘acos(0)’) yield an overflow or an underflow if that value is not
representable in the current exponent range.


File: mpfr.info,  Node: Floating-Point Values on Special Numbers,  Next: Exceptions,  Prev: Rounding,  Up: MPFR Basics

4.5 Floating-Point Values on Special Numbers
============================================

This section specifies the floating-point values (of type ‘mpfr_t’)
returned by MPFR functions (where by “returned” we mean here the
modified value of the destination object, which should not be mixed with
the ternary return value of type ‘int’ of those functions).  For
functions returning several values (like ‘mpfr_sin_cos’), the rules
apply to each result separately.

   Functions can have one or several input arguments.  An input point is
a mapping from these input arguments to the set of the MPFR numbers.
When none of its components are NaN, an input point can also be seen as
a tuple in the extended real numbers (the set of the real numbers with
both infinities).

   When the input point is in the domain of the mathematical function,
the result is rounded as described in *note Rounding:: (but see below
for the specification of the sign of an exact zero).  Otherwise the
general rules from this section apply unless stated otherwise in the
description of the MPFR function (*note MPFR Interface::).

   When the input point is not in the domain of the mathematical
function but is in its closure in the extended real numbers and the
function can be extended by continuity, the result is the obtained
limit.  Examples: ‘mpfr_hypot’ on (+Inf,0) gives +Inf.  But ‘mpfr_pow’
cannot be defined on (1,+Inf) using this rule, as one can find sequences
(X_N,Y_N) such that X_N goes to 1, Y_N goes to +Inf and X_N to the Y_N
goes to any positive value when N goes to the infinity.

   When the input point is in the closure of the domain of the
mathematical function and an input argument is +0 (resp. −0), one
considers the limit when the corresponding argument approaches 0 from
above (resp. below), if possible.  If the limit is not defined (e.g.,
‘mpfr_sqrt’ and ‘mpfr_log’ on −0), the behavior is specified in the
description of the MPFR function, but must be consistent with the rule
from the above paragraph (e.g., ‘mpfr_log’ on ±0 gives −Inf).

   When the result is equal to 0, its sign is determined by considering
the limit as if the input point were not in the domain: If one
approaches 0 from above (resp. below), the result is +0 (resp. −0); for
example, ‘mpfr_sin’ on −0 gives −0 and ‘mpfr_acos’ on 1 gives +0 (in all
rounding modes).  In the other cases, the sign is specified in the
description of the MPFR function; for example ‘mpfr_max’ on −0 and +0
gives +0.

   When the input point is not in the closure of the domain of the
function, the result is NaN.  Example: ‘mpfr_sqrt’ on −17 gives NaN.

   When an input argument is NaN, the result is NaN, possibly except
when a partial function is constant on the finite floating-point
numbers; such a case is always explicitly specified in *note MPFR
Interface::.  Example: ‘mpfr_hypot’ on (NaN,0) gives NaN, but
‘mpfr_hypot’ on (NaN,+Inf) gives +Inf (as specified in *note
Transcendental Functions::), since for any finite or infinite input X,
‘mpfr_hypot’ on (X,+Inf) gives +Inf.

   MPFR also tries to follow the specifications of the IEEE 754 standard
on special values (IEEE 754 agree with the above rules in most cases).
Any difference with IEEE 754 that is not explicitly mentioned, other
than those due to the single NaN, is unintended and might be regarded as
a bug.  See also *note MPFR and the IEEE 754 Standard::.


File: mpfr.info,  Node: Exceptions,  Next: Memory Handling,  Prev: Floating-Point Values on Special Numbers,  Up: MPFR Basics

4.6 Exceptions
==============

MPFR defines a global (or per-thread) flag for each supported exception.
A macro evaluating to a power of two is associated with each flag and
exception, in order to be able to specify a group of flags (or a mask)
by OR’ing such macros.

   Flags can be cleared (lowered), set (raised), and tested by functions
described in *note Exception Related Functions::.

   The supported exceptions are listed below.  The macro associated with
each exception is in parentheses.

   • Underflow (‘MPFR_FLAGS_UNDERFLOW’): An underflow occurs when the
     exact result of a function is a non-zero real number and the result
     obtained after the rounding, assuming an unbounded exponent range
     (for the rounding), has an exponent smaller than the minimum value
     of the current exponent range.  (In the round-to-nearest mode, the
     halfway case is rounded toward zero.)

     Note: This is not the single possible definition of the underflow.
     MPFR chooses to consider the underflow _after_ rounding.  The
     underflow before rounding can also be defined.  For instance,
     consider a function that has the exact result 7 multiplied by two
     to the power E − 4, where E is the smallest exponent (for a
     significand between 1/2 and 1), with a 2-bit target precision and
     rounding toward positive infinity.  The exact result has the
     exponent E − 1.  With the underflow before rounding, such a
     function call would yield an underflow, as E − 1 is outside the
     current exponent range.  However, MPFR first considers the rounded
     result assuming an unbounded exponent range.  The exact result
     cannot be represented exactly in precision 2, and here, it is
     rounded to 0.5 times 2 to E, which is representable in the current
     exponent range.  As a consequence, this will not yield an underflow
     in MPFR.

   • Overflow (‘MPFR_FLAGS_OVERFLOW’): An overflow occurs when the exact
     result of a function is a non-zero real number and the result
     obtained after the rounding, assuming an unbounded exponent range
     (for the rounding), has an exponent larger than the maximum value
     of the current exponent range.  In the round-to-nearest mode, the
     result is infinite.  Note: unlike the underflow case, there is only
     one possible definition of overflow here.

   • Divide-by-zero (‘MPFR_FLAGS_DIVBY0’): An exact infinite result is
     obtained from finite inputs.

   • NaN (‘MPFR_FLAGS_NAN’): A NaN exception occurs when the result of a
     function is NaN.

   • Inexact (‘MPFR_FLAGS_INEXACT’): An inexact exception occurs when
     the result of a function cannot be represented exactly and must be
     rounded.

   • Range error (‘MPFR_FLAGS_ERANGE’): A range exception occurs when a
     function that does not return a MPFR number (such as comparisons
     and conversions to an integer) has an invalid result (e.g., an
     argument is NaN in ‘mpfr_cmp’, or a conversion to an integer cannot
     be represented in the target type).

   Moreover, the group consisting of all the flags is represented by the
‘MPFR_FLAGS_ALL’ macro (if new flags are added in future MPFR versions,
they will be added to this macro too).

   Differences with the ISO C99 standard:

   • In C, only quiet NaNs are specified, and a NaN propagation does not
     raise an invalid exception.  Unless explicitly stated otherwise,
     MPFR sets the NaN flag whenever a NaN is generated, even when a NaN
     is propagated (e.g., in NaN + NaN), as if all NaNs were signaling.

   • An invalid exception in C corresponds to either a NaN exception or
     a range error in MPFR.


File: mpfr.info,  Node: Memory Handling,  Next: Getting the Best Efficiency Out of MPFR,  Prev: Exceptions,  Up: MPFR Basics

4.7 Memory Handling
===================

MPFR functions may create caches, e.g., when computing constants such as
Pi, either because the user has called a function like ‘mpfr_const_pi’
directly or because such a function was called internally by the MPFR
library itself to compute some other function.  When more precision is
needed, the value is automatically recomputed; a minimum of 10% increase
of the precision is guaranteed to avoid too many recomputations.

   MPFR functions may also create thread-local pools for internal use to
avoid the cost of memory allocation.  The pools can be freed with
‘mpfr_free_pool’ (but with a default MPFR build, they should not take
much memory, as the allocation size is limited).

   At any time, the user can free various caches and pools with
‘mpfr_free_cache’ and ‘mpfr_free_cache2’.  It is strongly advised to
free thread-local caches before terminating a thread, and all caches
before exiting when using tools like ‘valgrind’ (to avoid memory leaks
being reported).

   MPFR allocates its memory either on the stack (for temporary memory
only) or with the same allocator as the one configured for GMP: *note
(gmp.info)Custom Allocation::.  This means that the application must
make sure that data allocated with the current allocator will not be
reallocated or freed with a new allocator.  So, in practice, if an
application needs to change the allocator with
‘mp_set_memory_functions’, it should first free all data allocated with
the current allocator: for its own data, with ‘mpfr_clear’, etc.; for
the caches and pools, with ‘mpfr_mp_memory_cleanup’ in all threads where
MPFR is potentially used.  This function is currently equivalent to
‘mpfr_free_cache’, but ‘mpfr_mp_memory_cleanup’ is the recommended way
in case the allocation method changes in the future (for instance, one
may choose to allocate the caches for floating-point constants with
‘malloc’ to avoid freeing them if the allocator changes).  Developers
should also be aware that MPFR may also be used indirectly by libraries,
so that libraries based on MPFR should provide a clean-up function
calling ‘mpfr_mp_memory_cleanup’ and/or warn their users about this
issue.

   Note: For multithreaded applications, the allocator must be valid in
all threads where MPFR may be used; data allocated in one thread may be
reallocated and/or freed in some other thread.

   MPFR internal data such as flags, the exponent range, the default
precision, and the default rounding mode are either global (if MPFR has
not been compiled as thread safe) or per-thread (thread-local storage,
TLS).  The initial values of TLS data after a thread is created entirely
depend on the compiler and thread implementation (MPFR simply does a
conventional variable initialization, the variables being declared with
an implementation-defined TLS specifier).

   Writers of libraries using MPFR should be aware that the application
and/or another library used by the application may also use MPFR, so
that changing the exponent range, the default precision, or the default
rounding mode may have an effect on this other use of MPFR since these
data are not duplicated (unless they are in a different thread).
Therefore any such value changed in a library function should be
restored before the function returns (unless the purpose of the function
is to do such a change).  Writers of software using MPFR should also be
careful when changing such a value if they use a library using MPFR
(directly or indirectly), in order to make sure that such a change is
compatible with the library.


File: mpfr.info,  Node: Getting the Best Efficiency Out of MPFR,  Prev: Memory Handling,  Up: MPFR Basics

4.8 Getting the Best Efficiency Out of MPFR
===========================================

Here are a few hints to get the best efficiency out of MPFR:

   • you should avoid allocating and clearing variables.  Reuse
     variables whenever possible, allocate or clear outside of loops,
     pass temporary variables to subroutines instead of allocating them
     inside the subroutines;

   • use ‘mpfr_swap’ instead of ‘mpfr_set’ whenever possible.  This will
     avoid copying the significands;

   • avoid using MPFR from C++, or make sure your C++ interface does not
     perform unnecessary allocations or copies.  Slowdowns of up to a
     factor 15 have been observed on some applications with a C++
     interface;

   • MPFR functions work in-place: to compute ‘a = a + b’ you don’t need
     an auxiliary variable, you can directly write ‘mpfr_add (a, a, b,
     ...)’.


File: mpfr.info,  Node: MPFR Interface,  Next: API Compatibility,  Prev: MPFR Basics,  Up: Top

5 MPFR Interface
****************

The floating-point functions expect arguments of type ‘mpfr_t’.

   The MPFR floating-point functions have an interface that is similar
to the GNU MP functions.  The function prefix for floating-point
operations is ‘mpfr_’.

   The user has to specify the precision of each variable.  A
computation that assigns a variable will take place with the precision
of the assigned variable; the cost of that computation should not depend
on the precision of variables used as input (on average).

   The semantics of a calculation in MPFR is specified as follows:
Compute the requested operation exactly (with “infinite accuracy”), and
round the result to the precision of the destination variable, with the
given rounding mode.  The MPFR floating-point functions are intended to
be a smooth extension of the IEEE 754 arithmetic.  The results obtained
on a given computer are identical to those obtained on a computer with a
different word size, or with a different compiler or operating system.

   MPFR _does not keep track_ of the accuracy of a computation.  This is
left to the user or to a higher layer (for example, the MPFI library for
interval arithmetic).  As a consequence, if two variables are used to
store only a few significant bits, and their product is stored in a
variable with a large precision, then MPFR will still compute the result
with full precision.

   The value of the standard C macro ‘errno’ may be set to non-zero
after calling any MPFR function or macro, whether or not there is an
error.  Except when documented, MPFR will not set ‘errno’, but functions
called by the MPFR code (libc functions, memory allocator, etc.)  may do
so.

* Menu:

* Initialization Functions::
* Assignment Functions::
* Combined Initialization and Assignment Functions::
* Conversion Functions::
* Arithmetic Functions::
* Comparison Functions::
* Transcendental Functions::
* Input and Output Functions::
* Formatted Output Functions::
* Integer and Remainder Related Functions::
* Rounding-Related Functions::
* Miscellaneous Functions::
* Exception Related Functions::
* Memory Handling Functions::
* Compatibility with MPF::
* Custom Interface::
* Internals::


File: mpfr.info,  Node: Initialization Functions,  Next: Assignment Functions,  Prev: MPFR Interface,  Up: MPFR Interface

5.1 Initialization Functions
============================

An ‘mpfr_t’ object must be initialized before storing the first value in
it.  The functions ‘mpfr_init’ and ‘mpfr_init2’ are used for that
purpose.

 -- Function: void mpfr_init2 (mpfr_t X, mpfr_prec_t PREC)
     Initialize X, set its precision to be *exactly* PREC bits and its
     value to NaN.  (Warning: the corresponding MPF function initializes
     to zero instead.)

     Normally, a variable should be initialized once only or at least be
     cleared, using ‘mpfr_clear’, between initializations.  To change
     the precision of a variable that has already been initialized, use
     ‘mpfr_set_prec’ or ‘mpfr_prec_round’; note that if the precision is
     decreased, the unused memory will not be freed, so that it may be
     wise to choose a large enough initial precision in order to avoid
     reallocations.  The precision PREC must be an integer between
     ‘MPFR_PREC_MIN’ and ‘MPFR_PREC_MAX’ (otherwise the behavior is
     undefined).

 -- Function: void mpfr_inits2 (mpfr_prec_t PREC, mpfr_t X, ...)
     Initialize all the ‘mpfr_t’ variables of the given variable
     argument ‘va_list’, set their precision to be *exactly* PREC bits
     and their value to NaN.  See ‘mpfr_init2’ for more details.  The
     ‘va_list’ is assumed to be composed only of type ‘mpfr_t’ (or
     equivalently ‘mpfr_ptr’).  It begins from X, and ends when it
     encounters a null pointer (whose type must also be ‘mpfr_ptr’).

 -- Function: void mpfr_clear (mpfr_t X)
     Free the space occupied by the significand of X.  Make sure to call
     this function for all ‘mpfr_t’ variables when you are done with
     them.

 -- Function: void mpfr_clears (mpfr_t X, ...)
     Free the space occupied by all the ‘mpfr_t’ variables of the given
     ‘va_list’.  See ‘mpfr_clear’ for more details.  The ‘va_list’ is
     assumed to be composed only of type ‘mpfr_t’ (or equivalently
     ‘mpfr_ptr’).  It begins from X, and ends when it encounters a null
     pointer (whose type must also be ‘mpfr_ptr’).

   Here is an example of how to use multiple initialization functions
(since ‘NULL’ is not necessarily defined in this context, we use
‘(mpfr_ptr) 0’ instead, but ‘(mpfr_ptr) NULL’ is also correct).

     {
       mpfr_t x, y, z, t;
       mpfr_inits2 (256, x, y, z, t, (mpfr_ptr) 0);
       ...
       mpfr_clears (x, y, z, t, (mpfr_ptr) 0);
     }

 -- Function: void mpfr_init (mpfr_t X)
     Initialize X, set its precision to the default precision, and set
     its value to NaN.  The default precision can be changed by a call
     to ‘mpfr_set_default_prec’.

     Warning!  In a given program, some other libraries might change the
     default precision and not restore it.  Thus it is safer to use
     ‘mpfr_init2’.

 -- Function: void mpfr_inits (mpfr_t X, ...)
     Initialize all the ‘mpfr_t’ variables of the given ‘va_list’, set
     their precision to the default precision and their value to NaN.
     See ‘mpfr_init’ for more details.  The ‘va_list’ is assumed to be
     composed only of type ‘mpfr_t’ (or equivalently ‘mpfr_ptr’).  It
     begins from X, and ends when it encounters a null pointer (whose
     type must also be ‘mpfr_ptr’).

     Warning!  In a given program, some other libraries might change the
     default precision and not restore it.  Thus it is safer to use
     ‘mpfr_inits2’.

 -- Macro: MPFR_DECL_INIT (NAME, PREC)
     This macro declares NAME as an automatic variable of type ‘mpfr_t’,
     initializes it and sets its precision to be *exactly* PREC bits and
     its value to NaN.  NAME must be a valid identifier.  You must use
     this macro in the declaration section.  This macro is much faster
     than using ‘mpfr_init2’ but has some drawbacks:

        • You *must not* call ‘mpfr_clear’ with variables created with
          this macro (the storage is allocated at the point of
          declaration and deallocated when the brace-level is exited).

        • You *cannot* change their precision.

        • You *should not* create variables with huge precision with
          this macro.

        • Your compiler must support ‘Non-Constant Initializers’
          (standard in C++ and ISO C99) and ‘Token Pasting’ (standard in
          ISO C90).  If PREC is not a constant expression, your compiler
          must support ‘variable-length automatic arrays’ (standard in
          ISO C99).  GCC 2.95.3 and above supports all these features.
          If you compile your program with GCC in C90 mode and with
          ‘-pedantic’, you may want to define the ‘MPFR_USE_EXTENSION’
          macro to avoid warnings due to the ‘MPFR_DECL_INIT’
          implementation.

 -- Function: void mpfr_set_default_prec (mpfr_prec_t PREC)
     Set the default precision to be *exactly* PREC bits, where PREC can
     be any integer between ‘MPFR_PREC_MIN’ and ‘MPFR_PREC_MAX’.  The
     precision of a variable means the number of bits used to store its
     significand.  All subsequent calls to ‘mpfr_init’ or ‘mpfr_inits’
     will use this precision, but previously initialized variables are
     unaffected.  The default precision is set to 53 bits initially.

     Note: when MPFR is built with the ‘--enable-thread-safe’ configure
     option, the default precision is local to each thread.  *Note
     Memory Handling::, for more information.

 -- Function: mpfr_prec_t mpfr_get_default_prec (void)
     Return the current default MPFR precision in bits.  See the
     documentation of ‘mpfr_set_default_prec’.

   Here is an example on how to initialize floating-point variables:

     {
       mpfr_t x, y;
       mpfr_init (x);                /* use default precision */
       mpfr_init2 (y, 256);          /* precision _exactly_ 256 bits */
       ...
       /* When the program is about to exit, do ... */
       mpfr_clear (x);
       mpfr_clear (y);
       mpfr_free_cache ();           /* free the cache for constants like pi */
     }

   The following functions are useful for changing the precision during
a calculation.  A typical use would be for adjusting the precision
gradually in iterative algorithms like Newton-Raphson, making the
computation precision closely match the actual accurate part of the
numbers.

 -- Function: void mpfr_set_prec (mpfr_t X, mpfr_prec_t PREC)
     Set the precision of X to be *exactly* PREC bits, and set its value
     to NaN.  The previous value stored in X is lost.  It is equivalent
     to a call to ‘mpfr_clear(X)’ followed by a call to ‘mpfr_init2(X,
     PREC)’, but more efficient as no allocation is done in case the
     current allocated space for the significand of X is enough.  The
     precision PREC can be any integer between ‘MPFR_PREC_MIN’ and
     ‘MPFR_PREC_MAX’.  In case you want to keep the previous value
     stored in X, use ‘mpfr_prec_round’ instead.

     Warning!  You must not use this function if X was initialized with
     ‘MPFR_DECL_INIT’ or with ‘mpfr_custom_init_set’ (*note Custom
     Interface::).

 -- Function: mpfr_prec_t mpfr_get_prec (mpfr_t X)
     Return the precision of X, i.e., the number of bits used to store
     its significand.


File: mpfr.info,  Node: Assignment Functions,  Next: Combined Initialization and Assignment Functions,  Prev: Initialization Functions,  Up: MPFR Interface

5.2 Assignment Functions
========================

These functions assign new values to already initialized floats (*note
Initialization Functions::).

 -- Function: int mpfr_set (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
 -- Function: int mpfr_set_si (mpfr_t ROP, long int OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_uj (mpfr_t ROP, uintmax_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_sj (mpfr_t ROP, intmax_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_flt (mpfr_t ROP, float OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_d (mpfr_t ROP, double OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_ld (mpfr_t ROP, long double OP, mpfr_rnd_t
          RND)
 -- Function: int mpfr_set_float128 (mpfr_t ROP, _Float128 OP,
          mpfr_rnd_t RND)
 -- Function: int mpfr_set_decimal64 (mpfr_t ROP, _Decimal64 OP,
          mpfr_rnd_t RND)
 -- Function: int mpfr_set_decimal128 (mpfr_t ROP, _Decimal128 OP,
          mpfr_rnd_t RND)
 -- Function: int mpfr_set_z (mpfr_t ROP, mpz_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_q (mpfr_t ROP, mpq_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_set_f (mpfr_t ROP, mpf_t OP, mpfr_rnd_t RND)
     Set the value of ROP from OP, rounded toward the given direction
     RND.  Note that the input 0 is converted to +0 by ‘mpfr_set_ui’,
     ‘mpfr_set_si’, ‘mpfr_set_uj’, ‘mpfr_set_sj’, ‘mpfr_set_z’,
     ‘mpfr_set_q’ and ‘mpfr_set_f’, regardless of the rounding mode.
     The ‘mpfr_set_float128’ function is built only with the configure
     option ‘--enable-float128’, which requires the compiler or system
     provides the ‘_Float128’ data type (GCC 4.3 or later supports this
     data type); to use ‘mpfr_set_float128’, one should define the macro
     ‘MPFR_WANT_FLOAT128’ before including ‘mpfr.h’.  If the system does
     not support the IEEE 754 standard, ‘mpfr_set_flt’, ‘mpfr_set_d’,
     ‘mpfr_set_ld’, ‘mpfr_set_decimal64’ and ‘mpfr_set_decimal128’ might
     not preserve the signed zeros (and in any case they don’t preserve
     the sign bit of NaN).  The ‘mpfr_set_decimal64’ and
     ‘mpfr_set_decimal128’ functions are built only with the configure
     option ‘--enable-decimal-float’, and when the compiler or system
     provides the ‘_Decimal64’ and ‘_Decimal128’ data type; to use those
     functions, one should define the macro ‘MPFR_WANT_DECIMAL_FLOATS’
     before including ‘mpfr.h’.  ‘mpfr_set_q’ might fail if the
     numerator (or the denominator) cannot be represented as a ‘mpfr_t’.

     For ‘mpfr_set’, the sign of a NaN is propagated in order to mimic
     the IEEE 754 ‘copy’ operation.  But contrary to IEEE 754, the NaN
     flag is set as usual.

     Note: If you want to store a floating-point constant to a ‘mpfr_t’,
     you should use ‘mpfr_set_str’ (or one of the MPFR constant
     functions, such as ‘mpfr_const_pi’ for Pi) instead of
     ‘mpfr_set_flt’, ‘mpfr_set_d’, ‘mpfr_set_ld’, ‘mpfr_set_decimal64’
     or ‘mpfr_set_decimal128’.  Otherwise the floating-point constant
     will be first converted into a reduced-precision (e.g., 53-bit)
     binary (or decimal, for ‘mpfr_set_decimal64’ and
     ‘mpfr_set_decimal128’) number before MPFR can work with it.

 -- Function: int mpfr_set_ui_2exp (mpfr_t ROP, unsigned long int OP,
          mpfr_exp_t E, mpfr_rnd_t RND)
 -- Function: int mpfr_set_si_2exp (mpfr_t ROP, long int OP, mpfr_exp_t
          E, mpfr_rnd_t RND)
 -- Function: int mpfr_set_uj_2exp (mpfr_t ROP, uintmax_t OP, intmax_t
          E, mpfr_rnd_t RND)
 -- Function: int mpfr_set_sj_2exp (mpfr_t ROP, intmax_t OP, intmax_t E,
          mpfr_rnd_t RND)
 -- Function: int mpfr_set_z_2exp (mpfr_t ROP, mpz_t OP, mpfr_exp_t E,
          mpfr_rnd_t RND)
     Set the value of ROP from OP multiplied by two to the power E,
     rounded toward the given direction RND.  Note that the input 0 is
     converted to +0.

 -- Function: int mpfr_set_str (mpfr_t ROP, const char *S, int BASE,
          mpfr_rnd_t RND)
     Set ROP to the value of the string S in base BASE, rounded in the
     direction RND.  See the documentation of ‘mpfr_strtofr’ for a
     detailed description of BASE (with its special value 0) and the
     valid string formats.  Contrary to ‘mpfr_strtofr’, ‘mpfr_set_str’
     requires the _whole_ string to represent a valid floating-point
     number.

     The meaning of the return value differs from other MPFR functions:
     it is 0 if the entire string up to the final null character is a
     valid number in base BASE; otherwise it is −1, and ROP may have
     changed (users interested in the *note ternary value:: should use
     ‘mpfr_strtofr’ instead).

     Note: it is preferable to use ‘mpfr_strtofr’ if one wants to
     distinguish between an infinite ROP value coming from an infinite S
     or from an overflow.

 -- Function: int mpfr_strtofr (mpfr_t ROP, const char *NPTR, char
          **ENDPTR, int BASE, mpfr_rnd_t RND)
     Read a floating-point number from a string NPTR in base BASE,
     rounded in the direction RND; BASE must be either 0 (to detect the
     base, as described below) or a number from 2 to 62 (otherwise the
     behavior is undefined).  If NPTR starts with valid data, the result
     is stored in ROP and ‘*ENDPTR’ points to the character just after
     the valid data (if ENDPTR is not a null pointer); otherwise ROP is
     set to zero (for consistency with ‘strtod’) and the value of NPTR
     is stored in the location referenced by ENDPTR (if ENDPTR is not a
     null pointer).  The usual ternary value is returned.

     Parsing follows the standard C ‘strtod’ function with some
     extensions.  After optional leading whitespace, one has a subject
     sequence consisting of an optional sign (‘+’ or ‘-’), and either
     numeric data or special data.  The subject sequence is defined as
     the longest initial subsequence of the input string, starting with
     the first non-whitespace character, that is of the expected form.

     The form of numeric data is a non-empty sequence of significand
     digits with an optional decimal-point character, and an optional
     exponent consisting of an exponent prefix followed by an optional
     sign and a non-empty sequence of decimal digits.  A significand
     digit is either a decimal digit or a Latin letter (62 possible
     characters), with ‘A’ = 10, ‘B’ = 11, ..., ‘Z’ = 35; case is
     ignored in bases less than or equal to 36, in bases larger than 36,
     ‘a’ = 36, ‘b’ = 37, ..., ‘z’ = 61.  The value of a significand
     digit must be strictly less than the base.  The decimal-point
     character can be either the one defined by the current locale or
     the period (the first one is accepted for consistency with the C
     standard and the practice, the second one is accepted to allow the
     programmer to provide MPFR numbers from strings in a way that does
     not depend on the current locale).  The exponent prefix can be ‘e’
     or ‘E’ for bases up to 10, or ‘@’ in any base; it indicates a
     multiplication by a power of the base.  In bases 2 and 16, the
     exponent prefix can also be ‘p’ or ‘P’, in which case the exponent,
     called _binary exponent_, indicates a multiplication by a power of
     2 instead of the base (there is a difference only for base 16); in
     base 16 for example ‘1p2’ represents 4 whereas ‘1@2’ represents
     256.  The value of an exponent is always written in base 10.

     If the argument BASE is 0, then the base is automatically detected
     as follows.  If the significand starts with ‘0b’ or ‘0B’, base 2 is
     assumed.  If the significand starts with ‘0x’ or ‘0X’, base 16 is
     assumed.  Otherwise base 10 is assumed.

     Note: The exponent (if present) must contain at least a digit.
     Otherwise the possible exponent prefix and sign are not part of the
     number (which ends with the significand).  Similarly, if ‘0b’,
     ‘0B’, ‘0x’ or ‘0X’ is not followed by a binary/hexadecimal digit,
     then the subject sequence stops at the character ‘0’, thus 0 is
     read.

     Special data (for infinities and NaN) can be ‘@inf@’ or
     ‘@nan@(n-char-sequence-opt)’, and if BASE <= 16, it can also be
     ‘infinity’, ‘inf’, ‘nan’ or ‘nan(n-char-sequence-opt)’, all case
     insensitive with the rules of the C locale.  An
     ‘n-char-sequence-opt’ is a possibly empty string containing only
     digits, Latin letters and the underscore (0, 1, 2, ..., 9, a, b,
     ..., z, A, B, ..., Z, _).  Note: one has an optional sign for all
     data, even NaN.  For example, ‘-@nAn@(This_Is_Not_17)’ is a valid
     representation for NaN in base 17.

 -- Function: void mpfr_set_nan (mpfr_t X)
 -- Function: void mpfr_set_inf (mpfr_t X, int SIGN)
 -- Function: void mpfr_set_zero (mpfr_t X, int SIGN)
     Set the variable X to NaN (Not-a-Number), infinity or zero
     respectively.  In ‘mpfr_set_inf’ or ‘mpfr_set_zero’, X is set to
     positive infinity (+Inf) or positive zero (+0) iff SIGN is
     non-negative; in ‘mpfr_set_nan’, the sign bit of the result is
     unspecified.

 -- Function: void mpfr_swap (mpfr_t X, mpfr_t Y)
     Swap the structures pointed to by X and Y.  In particular, the
     values are exchanged without rounding (this may be different from
     three ‘mpfr_set’ calls using a third auxiliary variable).

     Warning!  Since the precisions are exchanged, this will affect
     future assignments.  Moreover, since the significand pointers are
     also exchanged, you must not use this function if the allocation
     method used for X and/or Y does not permit it.  This is the case
     when X and/or Y were declared and initialized with
     ‘MPFR_DECL_INIT’, and possibly with ‘mpfr_custom_init_set’ (*note
     Custom Interface::).


File: mpfr.info,  Node: Combined Initialization and Assignment Functions,  Next: Conversion Functions,  Prev: Assignment Functions,  Up: MPFR Interface

5.3 Combined Initialization and Assignment Functions
====================================================

 -- Macro: int mpfr_init_set (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Macro: int mpfr_init_set_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
 -- Macro: int mpfr_init_set_si (mpfr_t ROP, long int OP, mpfr_rnd_t
          RND)
 -- Macro: int mpfr_init_set_d (mpfr_t ROP, double OP, mpfr_rnd_t RND)
 -- Macro: int mpfr_init_set_ld (mpfr_t ROP, long double OP, mpfr_rnd_t
          RND)
 -- Macro: int mpfr_init_set_z (mpfr_t ROP, mpz_t OP, mpfr_rnd_t RND)
 -- Macro: int mpfr_init_set_q (mpfr_t ROP, mpq_t OP, mpfr_rnd_t RND)
 -- Macro: int mpfr_init_set_f (mpfr_t ROP, mpf_t OP, mpfr_rnd_t RND)
     Initialize ROP and set its value from OP, rounded in the direction
     RND.  The precision of ROP will be taken from the active default
     precision, as set by ‘mpfr_set_default_prec’.

 -- Function: int mpfr_init_set_str (mpfr_t X, const char *S, int BASE,
          mpfr_rnd_t RND)
     Initialize X and set its value from the string S in base BASE,
     rounded in the direction RND.  See ‘mpfr_set_str’.


File: mpfr.info,  Node: Conversion Functions,  Next: Arithmetic Functions,  Prev: Combined Initialization and Assignment Functions,  Up: MPFR Interface

5.4 Conversion Functions
========================

 -- Function: float mpfr_get_flt (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: double mpfr_get_d (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: long double mpfr_get_ld (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: _Float128 mpfr_get_float128 (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: _Decimal64 mpfr_get_decimal64 (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: _Decimal128 mpfr_get_decimal128 (mpfr_t OP, mpfr_rnd_t
          RND)
     Convert OP to a ‘float’ (respectively ‘double’, ‘long double’,
     ‘_Decimal64’, or ‘_Decimal128’) using the rounding mode RND.  If OP
     is NaN, some NaN (either quiet or signaling) or the result of
     0.0/0.0 is returned (the sign bit is not preserved).  If OP is
     ±Inf, an infinity of the same sign or the result of ±1.0/0.0 is
     returned.  If OP is zero, these functions return a zero, trying to
     preserve its sign, if possible.  The ‘mpfr_get_float128’,
     ‘mpfr_get_decimal64’ and ‘mpfr_get_decimal128’ functions are built
     only under some conditions: see the documentation of
     ‘mpfr_set_float128’, ‘mpfr_set_decimal64’ and ‘mpfr_set_decimal128’
     respectively.

 -- Function: long int mpfr_get_si (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: unsigned long int mpfr_get_ui (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: intmax_t mpfr_get_sj (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: uintmax_t mpfr_get_uj (mpfr_t OP, mpfr_rnd_t RND)
     Convert OP to a ‘long int’, an ‘unsigned long int’, an ‘intmax_t’
     or an ‘uintmax_t’ (respectively) after rounding it to an integer
     with respect to RND.  If OP is NaN, 0 is returned and the _erange_
     flag is set.  If OP is too big for the return type, the function
     returns the maximum or the minimum of the corresponding C type,
     depending on the direction of the overflow; the _erange_ flag is
     set too.  When there is no such range error, if the return value
     differs from OP, i.e., if OP is not an integer, the inexact flag is
     set.  See also ‘mpfr_fits_slong_p’, ‘mpfr_fits_ulong_p’,
     ‘mpfr_fits_intmax_p’ and ‘mpfr_fits_uintmax_p’.

 -- Function: double mpfr_get_d_2exp (long *EXP, mpfr_t OP, mpfr_rnd_t
          RND)
 -- Function: long double mpfr_get_ld_2exp (long *EXP, mpfr_t OP,
          mpfr_rnd_t RND)
     Return D and set EXP (formally, the value pointed to by EXP) such
     that 0.5 <= abs(D) < 1 and D times 2 raised to EXP equals OP
     rounded to double (resp. long double) precision, using the given
     rounding mode.  If OP is zero, then a zero of the same sign (or an
     unsigned zero, if the implementation does not have signed zeros) is
     returned, and EXP is set to 0.  If OP is NaN or an infinity, then
     the corresponding double precision (resp. long-double precision)
     value is returned, and EXP is undefined.

 -- Function: int mpfr_frexp (mpfr_exp_t *EXP, mpfr_t Y, mpfr_t X,
          mpfr_rnd_t RND)
     Set EXP (formally, the value pointed to by EXP) and Y such that
     0.5 <= abs(Y) < 1 and Y times 2 raised to EXP equals X rounded to
     the precision of Y, using the given rounding mode.  If X is zero,
     then Y is set to a zero of the same sign and EXP is set to 0.  If X
     is NaN or an infinity, then Y is set to the same value and EXP is
     undefined.

 -- Function: mpfr_exp_t mpfr_get_z_2exp (mpz_t ROP, mpfr_t OP)
     Put the scaled significand of OP (regarded as an integer, with the
     precision of OP) into ROP, and return the exponent EXP (which may
     be outside the current exponent range) such that OP exactly equals
     ROP times 2 raised to the power EXP.  If OP is zero, the minimal
     exponent EMIN is returned.  If OP is NaN or an infinity, the
     _erange_ flag is set, ROP is set to 0, and the minimal exponent
     EMIN is returned.  The returned exponent may be less than the
     minimal exponent EMIN of MPFR numbers in the current exponent
     range; in case the exponent is not representable in the
     ‘mpfr_exp_t’ type, the _erange_ flag is set and the minimal value
     of the ‘mpfr_exp_t’ type is returned.

 -- Function: int mpfr_get_z (mpz_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Convert OP to a ‘mpz_t’, after rounding it with respect to RND.  If
     OP is NaN or an infinity, the _erange_ flag is set, ROP is set to
     0, and 0 is returned.  Otherwise the return value is zero when ROP
     is equal to OP (i.e., when OP is an integer), positive when it is
     greater than OP, and negative when it is smaller than OP; moreover,
     if ROP differs from OP, i.e., if OP is not an integer, the inexact
     flag is set.

 -- Function: void mpfr_get_q (mpq_t ROP, mpfr_t OP)
     Convert OP to a ‘mpq_t’.  If OP is NaN or an infinity, the _erange_
     flag is set and ROP is set to 0.  Otherwise the conversion is
     always exact.

 -- Function: int mpfr_get_f (mpf_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Convert OP to a ‘mpf_t’, after rounding it with respect to RND.
     The _erange_ flag is set if OP is NaN or an infinity, which do not
     exist in MPF.  If OP is NaN, then ROP is undefined.  If OP is +Inf
     (resp. −Inf), then ROP is set to the maximum (resp. minimum) value
     in the precision of the MPF number; if a future MPF version
     supports infinities, this behavior will be considered incorrect and
     will change (portable programs should assume that ROP is set either
     to this finite number or to an infinite number).  Note that since
     MPFR currently has the same exponent type as MPF (but not with the
     same radix), the range of values is much larger in MPF than in
     MPFR, so that an overflow or underflow is not possible.

 -- Function: size_t mpfr_get_str_ndigits (int B, mpfr_prec_t P)
     Return the minimal integer m such that any number of P bits, when
     output with m digits in radix B with rounding to nearest, can be
     recovered exactly when read again, still with rounding to nearest.
     More precisely, we have m = 1 + ceil(P times log(2)/log(B)), with P
     replaced by P − 1 if B is a power of 2.

     The argument B must be in the range 2 to 62; this is the range of
     bases supported by the ‘mpfr_get_str’ function.  Note that contrary
     to the base argument of this function, negative values are not
     accepted.

 -- Function: char * mpfr_get_str (char *STR, mpfr_exp_t *EXPPTR, int
          BASE, size_t N, mpfr_t OP, mpfr_rnd_t RND)
     Convert OP to a string of digits in base abs(BASE), with rounding
     in the direction RND, where N is either zero (see below) or the
     number of significant digits output in the string.  The argument
     BASE may vary from 2 to 62 or from −2 to −36; otherwise the
     function does nothing and immediately returns a null pointer.

     For BASE in the range 2 to 36, digits and lower-case letters are
     used; for −2 to −36, digits and upper-case letters are used; for 37
     to 62, digits, upper-case letters, and lower-case letters, in that
     significance order, are used.  Warning!  This implies that for
     BASE > 10, the successor of the digit 9 depends on BASE.  This
     choice has been done for compatibility with GMP’s ‘mpf_get_str’
     function.  Users who wish a more consistent behavior should write a
     simple wrapper.

     If the input is NaN, then the returned string is ‘@NaN@’ and the
     NaN flag is set.  If the input is +Inf (resp. −Inf), then the
     returned string is ‘@Inf@’ (resp. ‘-@Inf@’).

     If the input number is a finite number, the exponent is written
     through the pointer EXPPTR (for input 0, the current minimal
     exponent is written); the type ‘mpfr_exp_t’ is large enough to hold
     the exponent in all cases.

     The generated string is a fraction, with an implicit radix point
     immediately to the left of the first digit.  For example, the
     number −3.1416 would be returned as ‘-31416’ in the string and 1
     written at EXPPTR.  If RND is to nearest, and OP is exactly in the
     middle of two consecutive possible outputs, the one with an even
     significand is chosen, where both significands are considered with
     the exponent of OP.  Note that for an odd base, this may not
     correspond to an even last digit: for example, with 2 digits in
     base 7, (14) and a half is rounded to (15), which is 12 in decimal,
     (16) and a half is rounded to (20), which is 14 in decimal, and
     (26) and a half is rounded to (26), which is 20 in decimal.

     If N is zero, the number of digits of the significand is taken as
     ‘mpfr_get_str_ndigits (BASE, P)’, where P is the precision of OP
     (*note mpfr_get_str_ndigits::).

     If STR is a null pointer, space for the significand is allocated
     using the allocation function (*note Memory Handling::) and a
     pointer to the string is returned (unless the base is invalid).  To
     free the returned string, you must use ‘mpfr_free_str’.

     If STR is not a null pointer, it should point to a block of storage
     large enough for the significand.  A safe block size (sufficient
     for any value) is max(N + 2, 7) if N is not zero; if N is zero,
     replace it by ‘mpfr_get_str_ndigits (BASE, P)’, where P is the
     precision of OP, as mentioned above.  The extra two bytes are for a
     possible minus sign, and for the terminating null character, and
     the value 7 accounts for ‘-@Inf@’ plus the terminating null
     character.  The pointer to the string STR is returned (unless the
     base is invalid).

     Like in usual functions, the inexact flag is set iff the result is
     inexact.

 -- Function: void mpfr_free_str (char *STR)
     Free a string allocated by ‘mpfr_get_str’ using the unallocation
     function (*note Memory Handling::).  The block is assumed to be
     ‘strlen(STR)+1’ bytes.

 -- Function: int mpfr_fits_ulong_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_slong_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_uint_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_sint_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_ushort_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_sshort_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_uintmax_p (mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_fits_intmax_p (mpfr_t OP, mpfr_rnd_t RND)
     Return non-zero if OP would fit in the respective C data type,
     respectively ‘unsigned long int’, ‘long int’, ‘unsigned int’,
     ‘int’, ‘unsigned short’, ‘short’, ‘uintmax_t’, ‘intmax_t’, when
     rounded to an integer in the direction RND.  For instance, with the
     ‘MPFR_RNDU’ rounding mode on −0.5, the result will be non-zero for
     all these functions.  For ‘MPFR_RNDF’, those functions return
     non-zero when it is guaranteed that the corresponding conversion
     function (for example ‘mpfr_get_ui’ for ‘mpfr_fits_ulong_p’), when
     called with faithful rounding, will always return a number that is
     representable in the corresponding type.  As a consequence, for
     ‘MPFR_RNDF’, ‘mpfr_fits_ulong_p’ will return non-zero for a
     non-negative number less than or equal to ‘ULONG_MAX’.


File: mpfr.info,  Node: Arithmetic Functions,  Next: Comparison Functions,  Prev: Conversion Functions,  Up: MPFR Interface

5.5 Arithmetic Functions
========================

 -- Function: int mpfr_add (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_add_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_add_si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_add_d (mpfr_t ROP, mpfr_t OP1, double OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_add_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_add_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 + OP2 rounded in the direction RND.  The IEEE 754
     rules are used, in particular for signed zeros.  But for types
     having no signed zeros, 0 is considered unsigned (i.e.,
     (+0) + 0 = (+0) and (−0) + 0 = (−0)).  The ‘mpfr_add_d’ function
     assumes that the radix of the ‘double’ type is a power of 2, with a
     precision at most that declared by the C implementation (macro
     ‘IEEE_DBL_MANT_DIG’, and if not defined 53 bits).

 -- Function: int mpfr_sub (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_ui_sub (mpfr_t ROP, unsigned long int OP1, mpfr_t
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_sub_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_si_sub (mpfr_t ROP, long int OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_sub_si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_d_sub (mpfr_t ROP, double OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_sub_d (mpfr_t ROP, mpfr_t OP1, double OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_z_sub (mpfr_t ROP, mpz_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_sub_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_sub_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 − OP2 rounded in the direction RND.  The IEEE 754
     rules are used, in particular for signed zeros.  But for types
     having no signed zeros, 0 is considered unsigned (i.e.,
     (+0) − 0 = (+0), (−0) − 0 = (−0), 0 − (+0) = (−0) and
     0 − (−0) = (+0)).  The same restrictions as for ‘mpfr_add_d’ apply
     to ‘mpfr_d_sub’ and ‘mpfr_sub_d’.

 -- Function: int mpfr_mul (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_mul_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_mul_si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_mul_d (mpfr_t ROP, mpfr_t OP1, double OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_mul_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_mul_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 times OP2 rounded in the direction RND.  When a
     result is zero, its sign is the product of the signs of the
     operands (for types having no signed zeros, 0 is considered
     positive).  The same restrictions as for ‘mpfr_add_d’ apply to
     ‘mpfr_mul_d’.  Note: when OP1 and OP2 are equal, use ‘mpfr_sqr’
     instead of ‘mpfr_mul’ for better efficiency.

 -- Function: int mpfr_sqr (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the square of OP rounded in the direction RND.

 -- Function: int mpfr_div (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_ui_div (mpfr_t ROP, unsigned long int OP1, mpfr_t
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_div_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_si_div (mpfr_t ROP, long int OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_div_si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_d_div (mpfr_t ROP, double OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_div_d (mpfr_t ROP, mpfr_t OP1, double OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_div_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_div_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 / OP2 rounded in the direction RND.  When a result
     is zero, its sign is the product of the signs of the operands.  For
     types having no signed zeros, 0 is considered positive; but note
     that if OP1 is non-zero and OP2 is zero, the result might change
     from ±Inf to NaN in future MPFR versions if there is an opposite
     decision on the IEEE 754 side.  The same restrictions as for
     ‘mpfr_add_d’ apply to ‘mpfr_d_div’ and ‘mpfr_div_d’.

 -- Function: int mpfr_sqrt (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_sqrt_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
     Set ROP to the square root of OP rounded in the direction RND.  Set
     ROP to −0 if OP is −0, to be consistent with the IEEE 754 standard
     (thus this differs from ‘mpfr_rootn_ui’ and ‘mpfr_rootn_si’ with
     N = 2).  Set ROP to NaN if OP is negative.

 -- Function: int mpfr_rec_sqrt (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the reciprocal square root of OP rounded in the
     direction RND.  Set ROP to +Inf if OP is ±0, +0 if OP is +Inf, and
     NaN if OP is negative.  Warning!  Therefore the result on −0 is
     different from the one of the rSqrt function recommended by the
     IEEE 754 standard (Section 9.2.1), which is −Inf instead of +Inf.
     However, ‘mpfr_rec_sqrt’ is equivalent to ‘mpfr_rootn_si’ with
     N = −2.

 -- Function: int mpfr_cbrt (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_rootn_ui (mpfr_t ROP, mpfr_t OP, unsigned long
          int N, mpfr_rnd_t RND)
 -- Function: int mpfr_rootn_si (mpfr_t ROP, mpfr_t OP, long int N,
          mpfr_rnd_t RND)
     Set ROP to the Nth root (with N = 3, the cubic root, for
     ‘mpfr_cbrt’) of OP rounded in the direction RND.  For N = 0, set
     ROP to NaN.  For N odd (resp. even) and OP negative (including
     −Inf), set ROP to a negative number (resp. NaN).  If OP is zero,
     set ROP to zero with the sign obtained by the usual limit rules,
     i.e., the same sign as OP if N is odd, and positive if N is even.

     These functions agree with the rootn operation of the IEEE 754
     standard.

 -- Function: int mpfr_root (mpfr_t ROP, mpfr_t OP, unsigned long int N,
          mpfr_rnd_t RND)
     This function is the same as ‘mpfr_rootn_ui’ except when OP is −0
     and N is even: the result is −0 instead of +0 (the reason was to be
     consistent with ‘mpfr_sqrt’).  Said otherwise, if OP is zero, set
     ROP to OP.

     This function predates IEEE 754-2008, where rootn was introduced,
     and behaves differently from the IEEE 754 rootn operation.  It is
     marked as deprecated and will be removed in a future release.

 -- Function: int mpfr_neg (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_abs (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to −OP and the absolute value of OP respectively, rounded
     in the direction RND.  Just changes or adjusts the sign if ROP and
     OP are the same variable, otherwise a rounding might occur if the
     precision of ROP is less than that of OP.

     The sign rule also applies to NaN in order to mimic the IEEE 754
     ‘negate’ and ‘abs’ operations, i.e., for ‘mpfr_neg’, the sign is
     reversed, and for ‘mpfr_abs’, the sign is set to positive.  But
     contrary to IEEE 754, the NaN flag is set as usual.

 -- Function: int mpfr_dim (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set ROP to the positive difference of OP1 and OP2, i.e., OP1 − OP2
     rounded in the direction RND if OP1 > OP2, +0 if OP1 <= OP2, and
     NaN if OP1 or OP2 is NaN.

 -- Function: int mpfr_mul_2ui (mpfr_t ROP, mpfr_t OP1, unsigned long
          int OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_mul_2si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 times 2 raised to OP2 rounded in the direction RND.
     Just increases the exponent by OP2 when ROP and OP1 are identical.

 -- Function: int mpfr_div_2ui (mpfr_t ROP, mpfr_t OP1, unsigned long
          int OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_div_2si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
     Set ROP to OP1 divided by 2 raised to OP2 rounded in the direction
     RND.  Just decreases the exponent by OP2 when ROP and OP1 are
     identical.

 -- Function: int mpfr_fac_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
     Set ROP to the factorial of OP, rounded in the direction RND.

 -- Function: int mpfr_fma (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t
          OP3, mpfr_rnd_t RND)
 -- Function: int mpfr_fms (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t
          OP3, mpfr_rnd_t RND)
     Set ROP to (OP1 times OP2) + OP3 (resp. (OP1 times OP2) − OP3)
     rounded in the direction RND.  Concerning special values (signed
     zeros, infinities, NaN), these functions behave like a
     multiplication followed by a separate addition or subtraction.
     That is, the fused operation matters only for rounding.

 -- Function: int mpfr_fmma (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t
          OP3, mpfr_t OP4, mpfr_rnd_t RND)
 -- Function: int mpfr_fmms (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t
          OP3, mpfr_t OP4, mpfr_rnd_t RND)
     Set ROP to (OP1 times OP2) + (OP3 times OP4) (resp.
     (OP1 times OP2) − (OP3 times OP4)) rounded in the direction RND.
     In case the computation of OP1 times OP2 overflows or underflows
     (or that of OP3 times OP4), the result ROP is computed as if the
     two intermediate products were computed with rounding toward zero.

 -- Function: int mpfr_hypot (mpfr_t ROP, mpfr_t X, mpfr_t Y, mpfr_rnd_t
          RND)
     Set ROP to the Euclidean norm of X and Y, i.e., the square root of
     the sum of the squares of X and Y, rounded in the direction RND.
     Special values are handled as described in the ISO C99
     (Section F.9.4.3) and IEEE 754 (Section 9.2.1) standards: If X or Y
     is an infinity, then +Inf is returned in ROP, even if the other
     number is NaN.

 -- Function: int mpfr_sum (mpfr_t ROP, const mpfr_ptr TAB[], unsigned
          long int N, mpfr_rnd_t RND)
     Set ROP to the sum of all elements of TAB, whose size is N,
     correctly rounded in the direction RND.  Warning: for efficiency
     reasons, TAB is an array of pointers to ‘mpfr_t’, not an array of
     ‘mpfr_t’.  If N = 0, then the result is +0, and if N = 1, then the
     function is equivalent to ‘mpfr_set’.  For the special exact cases,
     the result is the same as the one obtained with a succession of
     additions (‘mpfr_add’) in infinite precision.  In particular, if
     the result is an exact zero and N >= 1:
        • if all the inputs have the same sign (i.e., all +0 or all −0),
          then the result has the same sign as the inputs;
        • otherwise, either because all inputs are zeros with at least a
          +0 and a −0, or because some inputs are non-zero (but they
          globally cancel), the result is +0, except for the ‘MPFR_RNDD’
          rounding mode, where it is −0.

 -- Function: int mpfr_dot (mpfr_t ROP, const mpfr_ptr A[], const
          mpfr_ptr B[], unsigned long int N, mpfr_rnd_t RND)
     Set ROP to the dot product of elements of A by those of B, whose
     common size is N, correctly rounded in the direction RND.  Warning:
     for efficiency reasons, A and B are arrays of pointers to ‘mpfr_t’.
     This function is experimental, and does not yet handle intermediate
     overflows and underflows.

   For the power functions (with an integer exponent or not), see *note
mpfr_pow:: in *note Transcendental Functions::.


File: mpfr.info,  Node: Comparison Functions,  Next: Transcendental Functions,  Prev: Arithmetic Functions,  Up: MPFR Interface

5.6 Comparison Functions
========================

 -- Function: int mpfr_cmp (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_cmp_ui (mpfr_t OP1, unsigned long int OP2)
 -- Function: int mpfr_cmp_si (mpfr_t OP1, long int OP2)
 -- Function: int mpfr_cmp_d (mpfr_t OP1, double OP2)
 -- Function: int mpfr_cmp_ld (mpfr_t OP1, long double OP2)
 -- Function: int mpfr_cmp_z (mpfr_t OP1, mpz_t OP2)
 -- Function: int mpfr_cmp_q (mpfr_t OP1, mpq_t OP2)
 -- Function: int mpfr_cmp_f (mpfr_t OP1, mpf_t OP2)
     Compare OP1 and OP2.  Return a positive value if OP1 > OP2, zero if
     OP1 = OP2, and a negative value if OP1 < OP2.  Both OP1 and OP2 are
     considered to their full own precision, which may differ.  If one
     of the operands is NaN, set the _erange_ flag and return zero.

     Note: These functions may be useful to distinguish the three
     possible cases.  If you need to distinguish two cases only, it is
     recommended to use the predicate functions (e.g., ‘mpfr_equal_p’
     for the equality) described below; they behave like the IEEE 754
     comparisons, in particular when one or both arguments are NaN.  But
     only floating-point numbers can be compared (you may need to do a
     conversion first).

 -- Function: int mpfr_cmp_ui_2exp (mpfr_t OP1, unsigned long int OP2,
          mpfr_exp_t E)
 -- Function: int mpfr_cmp_si_2exp (mpfr_t OP1, long int OP2, mpfr_exp_t
          E)
     Compare OP1 and OP2 multiplied by two to the power E.  Similar as
     above.

 -- Function: int mpfr_cmpabs (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_cmpabs_ui (mpfr_t OP1, unsigned long int OP2)
     Compare |OP1| and |OP2|.  Return a positive value if |OP1| > |OP2|,
     zero if |OP1| = |OP2|, and a negative value if |OP1| < |OP2|.  If
     one of the operands is NaN, set the _erange_ flag and return zero.

 -- Function: int mpfr_nan_p (mpfr_t OP)
 -- Function: int mpfr_inf_p (mpfr_t OP)
 -- Function: int mpfr_number_p (mpfr_t OP)
 -- Function: int mpfr_zero_p (mpfr_t OP)
 -- Function: int mpfr_regular_p (mpfr_t OP)
     Return non-zero if OP is respectively NaN, an infinity, an ordinary
     number (i.e., neither NaN nor an infinity), zero, or a regular
     number (i.e., neither NaN, nor an infinity nor zero).  Return zero
     otherwise.

 -- Macro: int mpfr_sgn (mpfr_t OP)
     Return a positive value if OP > 0, zero if OP = 0, and a negative
     value if OP < 0.  If the operand is NaN, set the _erange_ flag and
     return zero.  This is equivalent to ‘mpfr_cmp_ui (OP, 0)’, but more
     efficient.

 -- Function: int mpfr_greater_p (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_greaterequal_p (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_less_p (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_lessequal_p (mpfr_t OP1, mpfr_t OP2)
 -- Function: int mpfr_equal_p (mpfr_t OP1, mpfr_t OP2)
     Return non-zero if OP1 > OP2, OP1 >= OP2, OP1 < OP2, OP1 <= OP2,
     OP1 = OP2 respectively, and zero otherwise.  Those functions return
     zero whenever OP1 and/or OP2 is NaN.

 -- Function: int mpfr_lessgreater_p (mpfr_t OP1, mpfr_t OP2)
     Return non-zero if OP1 < OP2 or OP1 > OP2 (i.e., neither OP1, nor
     OP2 is NaN, and OP1 <> OP2), zero otherwise (i.e., OP1 and/or OP2
     is NaN, or OP1 = OP2).

 -- Function: int mpfr_unordered_p (mpfr_t OP1, mpfr_t OP2)
     Return non-zero if OP1 or OP2 is a NaN (i.e., they cannot be
     compared), zero otherwise.

 -- Function: int mpfr_total_order_p (mpfr_t X, mpfr_t Y)
     This function implements the totalOrder predicate from IEEE 754,
     where −NaN < −Inf < negative finite numbers < −0 < +0 < positive
     finite numbers < +Inf < +NaN.  It returns a non-zero value (true)
     when X is smaller than or equal to Y for this order relation, and
     zero (false) otherwise.  Contrary to ‘mpfr_cmp (X, Y)’, which
     returns a ternary value, ‘mpfr_total_order_p’ returns a binary
     value (zero or non-zero).  In particular, ‘mpfr_total_order_p (X,
     X)’ returns true, ‘mpfr_total_order_p (-0, +0)’ returns true and
     ‘mpfr_total_order_p (+0, -0)’ returns false.  The sign bit of NaN
     also matters.


File: mpfr.info,  Node: Transcendental Functions,  Next: Input and Output Functions,  Prev: Comparison Functions,  Up: MPFR Interface

5.7 Transcendental Functions
============================

All those functions, except explicitly stated (for example
‘mpfr_sin_cos’), return a *note ternary value::, i.e., zero for an exact
return value, a positive value for a return value larger than the exact
result, and a negative value otherwise.

   Important note: In some domains, computing transcendental functions
(even more with correct rounding) is expensive, even in small precision,
for example the trigonometric and Bessel functions with a large
argument.  For some functions, the algorithm complexity and memory usage
does not depend only on the output precision: for instance, the memory
usage of ‘mpfr_rootn_ui’ is also linear in the argument K, and the
memory usage of the incomplete Gamma function also depends on the
precision of the input OP.  It is also theoretically possible that some
functions on some particular inputs might be very hard to round (i.e.
the Table Maker’s Dilemma occurs in much larger precisions than normally
expected from the context), meaning that the internal precision needs to
be increased even more; but it is conjectured that the needed precision
has a reasonable bound (and in particular, that potentially exact cases
are known and can be detected efficiently).

 -- Function: int mpfr_log (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_log_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
 -- Function: int mpfr_log2 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_log10 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the natural logarithm of OP, log2(OP) or log10(OP),
     respectively, rounded in the direction RND.  Set ROP to +0 if OP is
     1 (in all rounding modes), for consistency with the ISO C99 and
     IEEE 754 standards.  Set ROP to −Inf if OP is ±0 (i.e., the sign of
     the zero has no influence on the result).

 -- Function: int mpfr_log1p (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_log2p1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_log10p1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the logarithm of one plus OP (in radix two for
     ‘mpfr_log2p1’, and in radix ten for ‘mpfr_log10p1’), rounded in the
     direction RND.  Set ROP to −Inf if OP is −1.

 -- Function: int mpfr_exp (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_exp2 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_exp10 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the exponential of OP, to 2 power of OP or to 10 power
     of OP, respectively, rounded in the direction RND.

 -- Function: int mpfr_expm1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_exp2m1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_exp10m1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the exponential of OP followed by a subtraction by one
     (resp. 2 power of OP followed by a subtraction by one, and 10 power
     of OP followed by a subtraction by one), rounded in the direction
     RND.

 -- Function: int mpfr_pow (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_powr (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_pow_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int
          OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_pow_si (mpfr_t ROP, mpfr_t OP1, long int OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_pow_uj (mpfr_t ROP, mpfr_t OP1, uintmax_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_pow_sj (mpfr_t ROP, mpfr_t OP1, intmax_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_pown (mpfr_t ROP, mpfr_t OP1, intmax_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_pow_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_ui_pow_ui (mpfr_t ROP, unsigned long int OP1,
          unsigned long int OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_ui_pow (mpfr_t ROP, unsigned long int OP1, mpfr_t
          OP2, mpfr_rnd_t RND)
     Set ROP to OP1 raised to OP2, rounded in the direction RND.  The
     ‘mpfr_powr’ function corresponds to the ‘powr’ function from
     IEEE 754, i.e., it computes the exponential of OP2 multiplied by
     the logarithm of OP1.  The ‘mpfr_pown’ function is just an alias
     for ‘mpfr_pow_sj’ (defined with ‘#define mpfr_pown mpfr_pow_sj’),
     to follow the C2x function ‘pown’.  Special values are handled as
     described in the ISO C99 and IEEE 754 standards for the ‘pow’
     function:
        • ‘pow(±0, Y)’ returns ±Inf for Y a negative odd integer.
        • ‘pow(±0, Y)’ returns +Inf for Y negative and not an odd
          integer.
        • ‘pow(±0, Y)’ returns ±0 for Y a positive odd integer.
        • ‘pow(±0, Y)’ returns +0 for Y positive and not an odd integer.
        • ‘pow(-1, ±Inf)’ returns 1.
        • ‘pow(+1, Y)’ returns 1 for any Y, even a NaN.
        • ‘pow(X, ±0)’ returns 1 for any X, even a NaN.
        • ‘pow(X, Y)’ returns NaN for finite negative X and finite
          non-integer Y.
        • ‘pow(X, -Inf)’ returns +Inf for 0 < abs(x) < 1, and +0 for
          abs(x) > 1.
        • ‘pow(X, +Inf)’ returns +0 for 0 < abs(x) < 1, and +Inf for
          abs(x) > 1.
        • ‘pow(-Inf, Y)’ returns −0 for Y a negative odd integer.
        • ‘pow(-Inf, Y)’ returns +0 for Y negative and not an odd
          integer.
        • ‘pow(-Inf, Y)’ returns −Inf for Y a positive odd integer.
        • ‘pow(-Inf, Y)’ returns +Inf for Y positive and not an odd
          integer.
        • ‘pow(+Inf, Y)’ returns +0 for Y negative, and +Inf for Y
          positive.
     Note: When 0 is of integer type, it is regarded as +0 by these
     functions.  We do not use the usual limit rules in this case, as
     these rules are not used for ‘pow’.

 -- Function: int mpfr_compound_si (mpfr_t ROP, mpfr_t OP, long int N,
          mpfr_rnd_t RND)
     Set ROP to the power N of one plus OP, following IEEE 754 for the
     special cases and exceptions.  In particular:
        • When OP < −1, ROP is set to NaN.
        • When N is zero and OP is NaN (like any value greater or equal
          to −1), ROP is set to 1.
        • When OP = −1, ROP is set to +Inf for N < 0, and to +0 for
          N > 0.
     The other special cases follow the usual rules.

 -- Function: int mpfr_cos (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_sin (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_tan (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the cosine of OP, sine of OP, tangent of OP, rounded in
     the direction RND.

 -- Function: int mpfr_cosu (mpfr_t ROP, mpfr_t OP, unsigned long int U,
          mpfr_rnd_t RND)
 -- Function: int mpfr_sinu (mpfr_t ROP, mpfr_t OP, unsigned long int U,
          mpfr_rnd_t RND)
 -- Function: int mpfr_tanu (mpfr_t ROP, mpfr_t OP, unsigned long int U,
          mpfr_rnd_t RND)
     Set ROP to the cosine (resp. sine and tangent) of OP multiplied by
     2 Pi and divided by U.  For example, if U equals 360, one gets the
     cosine (resp. sine and tangent) for OP in degrees.  For
     ‘mpfr_cosu’, when OP multiplied by 2 and divided by U is a
     half-integer, the result is +0, following IEEE 754 (cosPi), so that
     the function is even.  For ‘mpfr_sinu’, when OP multiplied by 2 and
     divided by U is an integer, the result is zero with the same sign
     as OP, following IEEE 754 (sinPi), so that the function is odd.
     Similarly, the function ‘mpfr_tanu’ follows IEEE 754 (tanPi).

 -- Function: int mpfr_cospi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_sinpi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_tanpi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the cosine (resp. sine and tangent) of OP multiplied by
     Pi.  See the description of ‘mpfr_sinu’, ‘mpfr_cosu’ and
     ‘mpfr_tanu’ for special values.

 -- Function: int mpfr_sin_cos (mpfr_t SOP, mpfr_t COP, mpfr_t OP,
          mpfr_rnd_t RND)
     Set simultaneously SOP to the sine of OP and COP to the cosine of
     OP, rounded in the direction RND with the corresponding precisions
     of SOP and COP, which must be different variables.  Return 0 iff
     both results are exact, more precisely it returns s + 4c where
     s = 0 if SOP is exact, s = 1 if SOP is larger than the sine of OP,
     s = 2 if SOP is smaller than the sine of OP, and similarly for c
     and the cosine of OP.

 -- Function: int mpfr_sec (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_csc (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_cot (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the secant of OP, cosecant of OP, cotangent of OP,
     rounded in the direction RND.

 -- Function: int mpfr_acos (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_asin (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_atan (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the arc-cosine, arc-sine or arc-tangent of OP, rounded
     in the direction RND.  Note that since ‘acos(-1)’ returns the
     floating-point number closest to Pi according to the given rounding
     mode, this number might not be in the output range 0 <= ROP < Pi of
     the arc-cosine function; still, the result lies in the image of the
     output range by the rounding function.  The same holds for
     ‘asin(-1)’, ‘asin(1)’, ‘atan(-Inf)’, ‘atan(+Inf)’ or for ‘atan(OP)’
     with large OP and small precision of ROP.

 -- Function: int mpfr_acosu (mpfr_t ROP, mpfr_t OP, unsigned long int
          U, mpfr_rnd_t RND)
 -- Function: int mpfr_asinu (mpfr_t ROP, mpfr_t OP, unsigned long int
          U, mpfr_rnd_t RND)
 -- Function: int mpfr_atanu (mpfr_t ROP, mpfr_t OP, unsigned long int
          U, mpfr_rnd_t RND)
     Set ROP to A multiplied by U and divided by 2 Pi, where A is the
     arc-cosine (resp. arc-sine and arc-tangent) of OP.  For example, if
     U equals 360, ‘mpfr_acosu’ yields the arc-cosine in degrees.

 -- Function: int mpfr_acospi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_asinpi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_atanpi (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to ‘acos(OP)’ (resp. ‘asin(OP)’ and ‘atan(OP)’) divided by
     Pi.

 -- Function: int mpfr_atan2 (mpfr_t ROP, mpfr_t Y, mpfr_t X, mpfr_rnd_t
          RND)
 -- Function: int mpfr_atan2u (mpfr_t ROP, mpfr_t Y, mpfr_t X, unsigned
          long int U, mpfr_rnd_t RND)
 -- Function: int mpfr_atan2pi (mpfr_t ROP, mpfr_t Y, mpfr_t X,
          mpfr_rnd_t RND)
     For ‘mpfr_atan2’, set ROP to the arc-tangent2 of Y and X, rounded
     in the direction RND: if X > 0, then ‘atan2(Y, X)’ returns
     atan(Y/X); if X < 0, then ‘atan2(Y, X)’ returns the sign of Y
     multiplied by Pi − atan(abs(Y/X)), thus a number from −Pi to Pi.
     As for ‘atan’, in case the exact mathematical result is +Pi or −Pi,
     its rounded result might be outside the function output range.  The
     function ‘mpfr_atan2u’ behaves similarly, except the result is
     multiplied by U and divided by 2 Pi; and ‘mpfr_atan2pi’ is the same
     as ‘mpfr_atan2u’ with U = 2.  For example, if U equals 360,
     ‘mpfr_atan2u’ returns the arc-tangent in degrees, with values from
     −180 to 180.

     ‘atan2(Y, 0)’ does not raise any floating-point exception.  Special
     values are handled as described in the ISO C99 and IEEE 754
     standards for the ‘atan2’ function:
        • ‘atan2(+0, -0)’ returns +Pi.
        • ‘atan2(-0, -0)’ returns −Pi.
        • ‘atan2(+0, +0)’ returns +0.
        • ‘atan2(-0, +0)’ returns −0.
        • ‘atan2(+0, X)’ returns +Pi for X < 0.
        • ‘atan2(-0, X)’ returns −Pi for X < 0.
        • ‘atan2(+0, X)’ returns +0 for X > 0.
        • ‘atan2(-0, X)’ returns −0 for X > 0.
        • ‘atan2(Y, 0)’ returns −Pi/2 for Y < 0.
        • ‘atan2(Y, 0)’ returns +Pi/2 for Y > 0.
        • ‘atan2(+Inf, -Inf)’ returns +3*Pi/4.
        • ‘atan2(-Inf, -Inf)’ returns −3*Pi/4.
        • ‘atan2(+Inf, +Inf)’ returns +Pi/4.
        • ‘atan2(-Inf, +Inf)’ returns −Pi/4.
        • ‘atan2(+Inf, X)’ returns +Pi/2 for finite X.
        • ‘atan2(-Inf, X)’ returns −Pi/2 for finite X.
        • ‘atan2(Y, -Inf)’ returns +Pi for finite Y > 0.
        • ‘atan2(Y, -Inf)’ returns −Pi for finite Y < 0.
        • ‘atan2(Y, +Inf)’ returns +0 for finite Y > 0.
        • ‘atan2(Y, +Inf)’ returns −0 for finite Y < 0.

 -- Function: int mpfr_cosh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_sinh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_tanh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the hyperbolic cosine, sine or tangent of OP, rounded in
     the direction RND.

 -- Function: int mpfr_sinh_cosh (mpfr_t SOP, mpfr_t COP, mpfr_t OP,
          mpfr_rnd_t RND)
     Set simultaneously SOP to the hyperbolic sine of OP and COP to the
     hyperbolic cosine of OP, rounded in the direction RND with the
     corresponding precision of SOP and COP, which must be different
     variables.  Return 0 iff both results are exact (see ‘mpfr_sin_cos’
     for a more detailed description of the return value).

 -- Function: int mpfr_sech (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_csch (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_coth (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the hyperbolic secant of OP, cosecant of OP, cotangent
     of OP, rounded in the direction RND.

 -- Function: int mpfr_acosh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_asinh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_atanh (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the inverse hyperbolic cosine, sine or tangent of OP,
     rounded in the direction RND.

 -- Function: int mpfr_eint (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the exponential integral of OP, rounded in the direction
     RND.  This is the sum of Euler’s constant, of the logarithm of the
     absolute value of OP, and of the sum for k from 1 to infinity of OP
     to the power k, divided by k and the factorial of k.  For positive
     OP, it corresponds to the Ei function at OP (see formula 5.1.10
     from the Handbook of Mathematical Functions from Abramowitz and
     Stegun), and for negative OP, to the opposite of the E1 function
     (sometimes called eint1) at −OP (formula 5.1.1 from the same
     reference).

 -- Function: int mpfr_li2 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to real part of the dilogarithm of OP, rounded in the
     direction RND.  MPFR defines the dilogarithm function as the
     integral of −log(1−t)/t from 0 to OP.

 -- Function: int mpfr_gamma (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_gamma_inc (mpfr_t ROP, mpfr_t OP, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set ROP to the value of the Gamma function on OP, resp. the
     incomplete Gamma function on OP and OP2, rounded in the direction
     RND.  (In the literature, ‘mpfr_gamma_inc’ is called upper
     incomplete Gamma function, or sometimes complementary incomplete
     Gamma function.)  For ‘mpfr_gamma’ (and ‘mpfr_gamma_inc’ when OP2
     is zero), when OP is a negative integer, ROP is set to NaN.

     Note: the current implementation of ‘mpfr_gamma_inc’ is slow for
     large values of ROP or OP, in which case some internal overflow
     might also occur.

 -- Function: int mpfr_lngamma (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the value of the logarithm of the Gamma function on OP,
     rounded in the direction RND.  When OP is 1 or 2, set ROP to +0 (in
     all rounding modes).  When OP is an infinity or a non-positive
     integer, set ROP to +Inf, following the general rules on special
     values.  When −2k − 1 < OP < −2k, k being a non-negative integer,
     set ROP to NaN.  See also ‘mpfr_lgamma’.

 -- Function: int mpfr_lgamma (mpfr_t ROP, int *SIGNP, mpfr_t OP,
          mpfr_rnd_t RND)
     Set ROP to the value of the logarithm of the absolute value of the
     Gamma function on OP, rounded in the direction RND.  The sign (1 or
     −1) of Gamma(OP) is returned in the object pointed to by SIGNP.
     When OP is 1 or 2, set ROP to +0 (in all rounding modes).  When OP
     is an infinity or a non-positive integer, set ROP to +Inf.  When OP
     is NaN, −Inf or a negative integer, *SIGNP is undefined, and when
     OP is ±0, *SIGNP is the sign of the zero.

 -- Function: int mpfr_digamma (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the value of the Digamma (sometimes also called Psi)
     function on OP, rounded in the direction RND.  When OP is a
     negative integer, set ROP to NaN.

 -- Function: int mpfr_beta (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set ROP to the value of the Beta function at arguments OP1 and OP2.
     Note: the current code does not try to avoid internal overflow or
     underflow, and might use a huge internal precision in some cases.

 -- Function: int mpfr_zeta (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_zeta_ui (mpfr_t ROP, unsigned long int OP,
          mpfr_rnd_t RND)
     Set ROP to the value of the Riemann Zeta function on OP, rounded in
     the direction RND.

 -- Function: int mpfr_erf (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_erfc (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the value of the error function on OP (resp. the
     complementary error function on OP) rounded in the direction RND.

 -- Function: int mpfr_j0 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_j1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_jn (mpfr_t ROP, long int N, mpfr_t OP, mpfr_rnd_t
          RND)
     Set ROP to the value of the first kind Bessel function of order 0,
     (resp. 1 and N) on OP, rounded in the direction RND.  When OP is
     NaN, ROP is always set to NaN.  When OP is positive or negative
     infinity, ROP is set to +0.  When OP is zero, and N is not zero,
     ROP is set to +0 or −0 depending on the parity and sign of N, and
     the sign of OP.

 -- Function: int mpfr_y0 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_y1 (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_yn (mpfr_t ROP, long int N, mpfr_t OP, mpfr_rnd_t
          RND)
     Set ROP to the value of the second kind Bessel function of order 0
     (resp. 1 and N) on OP, rounded in the direction RND.  When OP is
     NaN or negative, ROP is always set to NaN.  When OP is +Inf, ROP is
     set to +0.  When OP is zero, ROP is set to +Inf or −Inf depending
     on the parity and sign of N.

 -- Function: int mpfr_agm (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set ROP to the arithmetic-geometric mean of OP1 and OP2, rounded in
     the direction RND.  The arithmetic-geometric mean is the common
     limit of the sequences u_n and v_n, where u_0 = OP1, v_0 = OP2,
     u_(n+1) is the arithmetic mean of u_n and v_n, and v_(n+1) is the
     geometric mean of u_n and v_n.  If any operand is negative and the
     other one is not zero, set ROP to NaN.  If any operand is zero and
     the other one is finite (resp. infinite), set ROP to +0 (resp.
     NaN).

 -- Function: int mpfr_ai (mpfr_t ROP, mpfr_t X, mpfr_rnd_t RND)
     Set ROP to the value of the Airy function Ai on X, rounded in the
     direction RND.  When X is NaN, ROP is always set to NaN.  When X is
     +Inf or −Inf, ROP is +0.  The current implementation is not
     intended to be used with large arguments.  It works with abs(X)
     typically smaller than 500.  For larger arguments, other methods
     should be used and will be implemented in a future version.

 -- Function: int mpfr_const_log2 (mpfr_t ROP, mpfr_rnd_t RND)
 -- Function: int mpfr_const_pi (mpfr_t ROP, mpfr_rnd_t RND)
 -- Function: int mpfr_const_euler (mpfr_t ROP, mpfr_rnd_t RND)
 -- Function: int mpfr_const_catalan (mpfr_t ROP, mpfr_rnd_t RND)
     Set ROP to the logarithm of 2, the value of Pi, of Euler’s constant
     0.577..., of Catalan’s constant 0.915..., respectively, rounded in
     the direction RND.  These functions cache the computed values to
     avoid other calculations if a lower or equal precision is
     requested.  To free these caches, use ‘mpfr_free_cache’ or
     ‘mpfr_free_cache2’.


File: mpfr.info,  Node: Input and Output Functions,  Next: Formatted Output Functions,  Prev: Transcendental Functions,  Up: MPFR Interface

5.8 Input and Output Functions
==============================

This section describes functions that perform input from an input/output
stream, and functions that output to an input/output stream.  Passing a
null pointer for a ‘stream’ to any of these functions will make them
read from ‘stdin’ and write to ‘stdout’, respectively.

   When using a function that takes a ‘FILE *’ argument, you must
include the ‘<stdio.h>’ standard header before ‘mpfr.h’, to allow
‘mpfr.h’ to define prototypes for these functions.

 -- Function: size_t mpfr_out_str (FILE *STREAM, int BASE, size_t N,
          mpfr_t OP, mpfr_rnd_t RND)
     Output OP on stream STREAM as a text string in base abs(BASE),
     rounded in the direction RND.  The base may vary from 2 to 62 or
     from −2 to −36 (any other value yields undefined behavior).  The
     argument N has the same meaning as in ‘mpfr_get_str’ (*note
     mpfr_get_str::): Print N significant digits exactly, or if N is 0,
     the number ‘mpfr_get_str_ndigits (BASE, P)’, where P is the
     precision of OP (*note mpfr_get_str_ndigits::).

     If the input is NaN, +Inf, −Inf, +0, or −0, then ‘@NaN@’, ‘@Inf@’,
     ‘-@Inf@’, ‘0’, or ‘-0’ is output, respectively.

     For the regular numbers, the format of the output is the following:
     the most significant digit, then a decimal-point character (defined
     by the current locale), then the remaining N − 1 digits (including
     trailing zeros), then the exponent prefix, then the exponent in
     decimal.  The exponent prefix is ‘e’ when abs(BASE) <= 10, and ‘@’
     when abs(BASE) > 10.  *Note mpfr_get_str:: for information on the
     digits depending on the base.

     Return the number of characters written, or if an error occurred,
     return 0.

 -- Function: size_t mpfr_inp_str (mpfr_t ROP, FILE *STREAM, int BASE,
          mpfr_rnd_t RND)
     Input a string in base BASE from stream STREAM, rounded in the
     direction RND, and put the read float in ROP.

     After skipping optional whitespace (as defined by ‘isspace’, which
     depends on the current locale), this function reads a word, defined
     as the longest sequence of non-whitespace characters, and parses it
     using ‘mpfr_set_str’.  See the documentation of ‘mpfr_strtofr’ for
     a detailed description of the valid string formats.

     Return the number of bytes read (including the leading whitespace,
     if any), or if the string format is invalid or an error occurred,
     return 0.

 -- Function: int mpfr_fpif_export (FILE *STREAM, mpfr_t OP)
     Export the number OP to the stream STREAM in a floating-point
     interchange format.  In particular one can export on a 32-bit
     computer and import on a 64-bit computer, or export on a
     little-endian computer and import on a big-endian computer.  The
     precision of OP and the sign bit of a NaN are stored too.  Return 0
     iff the export was successful.

     Note: this function is experimental and its interface might change
     in future versions.

 -- Function: int mpfr_fpif_import (mpfr_t OP, FILE *STREAM)
     Import the number OP from the stream STREAM in a floating-point
     interchange format (see ‘mpfr_fpif_export’).  Note that the
     precision of OP is set to the one read from the stream, and the
     sign bit is always retrieved (even for NaN).  If the stored
     precision is zero or greater than ‘MPFR_PREC_MAX’, the function
     fails (it returns non-zero) and OP is unchanged.  If the function
     fails for another reason, OP is set to NaN and it is unspecified
     whether the precision of OP has changed to the one read from the
     file.  Return 0 iff the import was successful.

     Note: this function is experimental and its interface might change
     in future versions.

 -- Function: void mpfr_dump (mpfr_t OP)
     Output OP on ‘stdout’ in some unspecified format, then a newline
     character.  This function is mainly for debugging purpose.  Thus
     invalid data may be supported.  Everything that is not specified
     may change without breaking the ABI and may depend on the
     environment.

     The current output format is the following: a minus sign if the
     sign bit is set (even for NaN); ‘@NaN@’, ‘@Inf@’ or ‘0’ if the
     argument is NaN, an infinity or zero, respectively; otherwise the
     remaining of the output is as follows: ‘0.’ then the p bits of the
     binary significand, where p is the precision of the number; if the
     trailing bits are not all zeros (which must not occur with valid
     data), they are output enclosed by square brackets; the character
     ‘E’ followed by the exponent written in base 10; in case of invalid
     data or out-of-range exponent, this function outputs three
     exclamation marks (‘!!!’), followed by flags, followed by three
     exclamation marks (‘!!!’) again.  These flags are: ‘N’ if the most
     significant bit of the significand is 0 (i.e., the number is not
     normalized); ‘T’ if there are non-zero trailing bits; ‘U’ if this
     is an UBF number (internal use only); ‘<’ if the exponent is less
     than the current minimum exponent; ‘>’ if the exponent is greater
     than the current maximum exponent.


File: mpfr.info,  Node: Formatted Output Functions,  Next: Integer and Remainder Related Functions,  Prev: Input and Output Functions,  Up: MPFR Interface

5.9 Formatted Output Functions
==============================

5.9.1 Requirements
------------------

The class of ‘mpfr_printf’ functions provides formatted output in a
similar manner as the standard C ‘printf’.  These functions are defined
only if your system supports ISO C variadic functions and the
corresponding argument access macros.

   When using any of these functions, you must include the ‘<stdio.h>’
standard header before ‘mpfr.h’, to allow ‘mpfr.h’ to define prototypes
for these functions.

5.9.2 Format String
-------------------

The format specification accepted by ‘mpfr_printf’ is an extension of
the ‘gmp_printf’ one (itself, an extension of the ‘printf’ one).  The
conversion specification is of the form:

     % [flags] [width] [.[precision]] [type] [rounding] conv

   ‘flags’, ‘width’, and ‘precision’ have the same meaning as for the
standard ‘printf’ (in particular, notice that the precision is related
to the number of digits displayed in the base chosen by ‘conv’ and not
related to the internal precision of the ‘mpfr_t’ variable), but note
that for ‘Re’, the default precision is not the same as the one for ‘e’.
‘mpfr_printf’ accepts the same ‘type’ specifiers as GMP (except the
non-standard and deprecated ‘q’, use ‘ll’ instead), namely the length
modifiers defined in the C standard:

     ‘h’       ‘short’
     ‘hh’      ‘char’
     ‘j’       ‘intmax_t’ or ‘uintmax_t’
     ‘l’       ‘long’ or ‘wchar_t’
     ‘ll’      ‘long long’
     ‘L’       ‘long double’
     ‘t’       ‘ptrdiff_t’
     ‘z’       ‘size_t’

and the ‘type’ specifiers defined in GMP, plus ‘R’ and ‘P’, which are
specific to MPFR (the second column in the table below shows the type of
the argument read in the argument list and the kind of ‘conv’ specifier
to use after the ‘type’ specifier):

     ‘F’       ‘mpf_t’, float conversions
     ‘Q’       ‘mpq_t’, integer conversions
     ‘M’       ‘mp_limb_t’, integer conversions
     ‘N’       ‘mp_limb_t’ array, integer conversions
     ‘Z’       ‘mpz_t’, integer conversions
               
     ‘P’       ‘mpfr_prec_t’, integer conversions
     ‘R’       ‘mpfr_t’, float conversions

   The ‘type’ specifiers have the same restrictions as those mentioned
in the GMP documentation: *note (gmp.info)Formatted Output Strings::.
In particular, the ‘type’ specifiers (except ‘R’ and ‘P’) are supported
only if they are supported by ‘gmp_printf’ in your GMP build; this
implies that the standard specifiers, such as ‘t’, must _also_ be
supported by your C library if you want to use them.

   The ‘rounding’ field is specific to ‘mpfr_t’ arguments and should not
be used with other types.

   With conversion specification not involving ‘P’ and ‘R’ types,
‘mpfr_printf’ behaves exactly as ‘gmp_printf’.

   Thus the ‘conv’ specifier ‘F’ is not supported (due to the use of ‘F’
as the ‘type’ specifier for ‘mpf_t’), except for the ‘type’ specifier
‘R’ (i.e., for ‘mpfr_t’ arguments).

   The ‘P’ type specifies that a following ‘d’, ‘i’, ‘o’, ‘u’, ‘x’, or
‘X’ conversion specifier applies to a ‘mpfr_prec_t’ argument.  It is
needed because the ‘mpfr_prec_t’ type does not necessarily correspond to
an ‘int’ or any fixed standard type.  The ‘precision’ value specifies
the minimum number of digits to appear.  The default precision is 1.
For example:
     mpfr_t x;
     mpfr_prec_t p;
     mpfr_init (x);
     ...
     p = mpfr_get_prec (x);
     mpfr_printf ("variable x with %Pd bits", p);

   The ‘R’ type specifies that a following ‘a’, ‘A’, ‘b’, ‘e’, ‘E’, ‘f’,
‘F’, ‘g’, ‘G’, or ‘n’ conversion specifier applies to a ‘mpfr_t’
argument.  The ‘R’ type can be followed by a ‘rounding’ specifier
denoted by one of the following characters:

     ‘U’       round toward positive infinity
     ‘D’       round toward negative infinity
     ‘Y’       round away from zero
     ‘Z’       round toward zero
     ‘N’       round to nearest (with ties to even)
     ‘*’       rounding mode indicated by the
               ‘mpfr_rnd_t’ argument just before the
               corresponding ‘mpfr_t’ variable.

   The default rounding mode is rounding to nearest.  The following
three examples are equivalent:
     mpfr_t x;
     mpfr_init (x);
     ...
     mpfr_printf ("%.128Rf", x);
     mpfr_printf ("%.128RNf", x);
     mpfr_printf ("%.128R*f", MPFR_RNDN, x);

   Note that the rounding away from zero mode is specified with ‘Y’
because ISO C reserves the ‘A’ specifier for hexadecimal output (see
below).

   The output ‘conv’ specifiers allowed with ‘mpfr_t’ parameter are:

     ‘a’ ‘A’   hex float, C99 style
     ‘b’       binary output
     ‘e’ ‘E’   scientific-format float
     ‘f’ ‘F’   fixed-point float
     ‘g’ ‘G’   fixed-point or scientific float

   The conversion specifier ‘b’, which displays the argument in binary,
is specific to ‘mpfr_t’ arguments and should not be used with other
types.  Other conversion specifiers have the same meaning as for a
‘double’ argument.

   In case of non-decimal output, only the significand is written in the
specified base, the exponent is always displayed in decimal.

   Non-real values are always displayed as ‘nan’ / ‘inf’ for the ‘a’,
‘b’, ‘e’, ‘f’, and ‘g’ specifiers, and ‘NAN’ / ‘INF’ for ‘A’, ‘E’, ‘F’,
and ‘G’ specifiers, possibly preceded by a sign or a space (the minus
sign when the value has a negative sign, the plus sign when the value
has a positive sign and the ‘+’ flag is used, a space when the value has
a positive sign and the _space_ flag is used).

   The ‘mpfr_t’ number is rounded to the given precision in the
direction specified by the rounding mode (see below if the precision is
missing).  Similarly to the native C types, the precision is the number
of digits output after the decimal-point character, except for the ‘g’
and ‘G’ conversion specifiers, where it is the number of significant
digits (but trailing zeros of the fractional part are not output by
default), or 1 if the precision is zero.  If the precision is zero with
rounding to nearest mode and one of the following conversion specifiers:
‘a’, ‘A’, ‘b’, ‘e’, ‘E’, tie case is rounded to even when it lies
between two consecutive values at the wanted precision which have the
same exponent, otherwise, it is rounded away from zero.  For instance,
85 is displayed as ‘8e+1’ and 95 is displayed as ‘1e+2’ with the format
specification ‘"%.0RNe"’.  This also applies when the ‘g’ (resp. ‘G’)
conversion specifier uses the ‘e’ (resp. ‘E’) style.  If the precision
is set to a value greater than the maximum value for an ‘int’, it will
be silently reduced down to ‘INT_MAX’.

   If the precision is missing, it is chosen as follows, depending on
the conversion specifier.
   • With ‘a’, ‘A’, and ‘b’, it is chosen to have an exact
     representation with no trailing zeros.
   • With ‘e’ and ‘E’, it is ceil(p times log(2)/log(10)), where p is
     the precision of the input variable, matching the choice done for
     ‘mpfr_get_str’; thus, if rounding to nearest is used, outputting
     the value with a missing precision and reading it back will yield
     the original value.
   • With ‘f’, ‘F’, ‘g’, and ‘G’, it is 6.

5.9.3 Functions
---------------

For all the following functions, if the number of characters that ought
to be written exceeds the maximum limit ‘INT_MAX’ for an ‘int’, nothing
is written in the stream (resp. to ‘stdout’, to BUF, to STR), the
function returns −1, sets the _erange_ flag, and ‘errno’ is set to
‘EOVERFLOW’ if the ‘EOVERFLOW’ macro is defined (such as on POSIX
systems).  Note, however, that ‘errno’ might be changed to another value
by some internal library call if another error occurs there (currently,
this would come from the unallocation function).

 -- Function: int mpfr_fprintf (FILE *STREAM, const char *TEMPLATE, ...)
 -- Function: int mpfr_vfprintf (FILE *STREAM, const char *TEMPLATE,
          va_list AP)
     Print to the stream STREAM the optional arguments under the control
     of the template string TEMPLATE.  Return the number of characters
     written or a negative value if an error occurred.

 -- Function: int mpfr_printf (const char *TEMPLATE, ...)
 -- Function: int mpfr_vprintf (const char *TEMPLATE, va_list AP)
     Print to ‘stdout’ the optional arguments under the control of the
     template string TEMPLATE.  Return the number of characters written
     or a negative value if an error occurred.

 -- Function: int mpfr_sprintf (char *BUF, const char *TEMPLATE, ...)
 -- Function: int mpfr_vsprintf (char *BUF, const char *TEMPLATE,
          va_list AP)
     Form a null-terminated string corresponding to the optional
     arguments under the control of the template string TEMPLATE, and
     print it in BUF.  No overlap is permitted between BUF and the other
     arguments.  Return the number of characters written in the array
     BUF _not counting_ the terminating null character or a negative
     value if an error occurred.

 -- Function: int mpfr_snprintf (char *BUF, size_t N, const char
          *TEMPLATE, ...)
 -- Function: int mpfr_vsnprintf (char *BUF, size_t N, const char
          *TEMPLATE, va_list AP)
     Form a null-terminated string corresponding to the optional
     arguments under the control of the template string TEMPLATE, and
     print it in BUF.  If N is zero, nothing is written and BUF may be a
     null pointer, otherwise, the first N − 1 characters are written in
     BUF and the N-th one is a null character.  Return the number of
     characters that would have been written had N been sufficiently
     large, _not counting_ the terminating null character, or a negative
     value if an error occurred.

 -- Function: int mpfr_asprintf (char **STR, const char *TEMPLATE, ...)
 -- Function: int mpfr_vasprintf (char **STR, const char *TEMPLATE,
          va_list AP)
     Write their output as a null terminated string in a block of memory
     allocated using the allocation function (*note Memory Handling::).
     A pointer to the block is stored in STR.  The block of memory must
     be freed using ‘mpfr_free_str’.  The return value is the number of
     characters written in the string, excluding the null-terminator, or
     a negative value if an error occurred, in which case the contents
     of STR are undefined.


File: mpfr.info,  Node: Integer and Remainder Related Functions,  Next: Rounding-Related Functions,  Prev: Formatted Output Functions,  Up: MPFR Interface

5.10 Integer and Remainder Related Functions
============================================

 -- Function: int mpfr_rint (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_ceil (mpfr_t ROP, mpfr_t OP)
 -- Function: int mpfr_floor (mpfr_t ROP, mpfr_t OP)
 -- Function: int mpfr_round (mpfr_t ROP, mpfr_t OP)
 -- Function: int mpfr_roundeven (mpfr_t ROP, mpfr_t OP)
 -- Function: int mpfr_trunc (mpfr_t ROP, mpfr_t OP)
     Set ROP to OP rounded to an integer.  ‘mpfr_rint’ rounds to the
     nearest representable integer in the given direction RND, and the
     other five functions behave in a similar way with some fixed
     rounding mode:
        • ‘mpfr_ceil’: to the next higher or equal representable integer
          (like ‘mpfr_rint’ with ‘MPFR_RNDU’);
        • ‘mpfr_floor’ to the next lower or equal representable integer
          (like ‘mpfr_rint’ with ‘MPFR_RNDD’);
        • ‘mpfr_round’ to the nearest representable integer, rounding
          halfway cases away from zero (as in the roundTiesToAway mode
          of IEEE 754);
        • ‘mpfr_roundeven’ to the nearest representable integer,
          rounding halfway cases with the even-rounding rule (like
          ‘mpfr_rint’ with ‘MPFR_RNDN’);
        • ‘mpfr_trunc’ to the next representable integer toward zero
          (like ‘mpfr_rint’ with ‘MPFR_RNDZ’).
     When OP is a zero or an infinity, set ROP to the same value (with
     the same sign).

     The return value is zero when the result is exact, positive when it
     is greater than the original value of OP, and negative when it is
     smaller.  More precisely, the return value is 0 when OP is an
     integer representable in ROP, 1 or −1 when OP is an integer that is
     not representable in ROP, 2 or −2 when OP is not an integer.

     When OP is NaN, the NaN flag is set as usual.  In the other cases,
     the inexact flag is set when ROP differs from OP, following the ISO
     C99 rule for the ‘rint’ function.  If you want the behavior to be
     more like IEEE 754 / ISO TS 18661-1, i.e., the usual behavior where
     the round-to-integer function is regarded as any other mathematical
     function, you should use one of the ‘mpfr_rint_*’ functions
     instead.

     Note that no double rounding is performed; for instance, 10.5
     (1010.1 in binary) is rounded by ‘mpfr_rint’ with rounding to
     nearest to 12 (1100 in binary) in 2-bit precision, because the two
     enclosing numbers representable on two bits are 8 and 12, and the
     closest is 12.  (If one first rounded to an integer, one would
     round 10.5 to 10 with even rounding, and then 10 would be rounded
     to 8 again with even rounding.)

 -- Function: int mpfr_rint_ceil (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
 -- Function: int mpfr_rint_floor (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t
          RND)
 -- Function: int mpfr_rint_round (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t
          RND)
 -- Function: int mpfr_rint_roundeven (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t
          RND)
 -- Function: int mpfr_rint_trunc (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t
          RND)
     Set ROP to OP rounded to an integer:
        • ‘mpfr_rint_ceil’: to the next higher or equal integer;
        • ‘mpfr_rint_floor’: to the next lower or equal integer;
        • ‘mpfr_rint_round’: to the nearest integer, rounding halfway
          cases away from zero;
        • ‘mpfr_rint_roundeven’: to the nearest integer, rounding
          halfway cases to the nearest even integer;
        • ‘mpfr_rint_trunc’ to the next integer toward zero.
     If the result is not representable, it is rounded in the direction
     RND.  When OP is a zero or an infinity, set ROP to the same value
     (with the same sign).  The return value is the ternary value
     associated with the considered round-to-integer function (regarded
     in the same way as any other mathematical function).

     Contrary to ‘mpfr_rint’, those functions do perform a double
     rounding: first OP is rounded to the nearest integer in the
     direction given by the function name, then this nearest integer (if
     not representable) is rounded in the given direction RND.  Thus
     these round-to-integer functions behave more like the other
     mathematical functions, i.e., the returned result is the correct
     rounding of the exact result of the function in the real numbers.

     For example, ‘mpfr_rint_round’ with rounding to nearest and a
     precision of two bits rounds 6.5 to 7 (halfway cases away from
     zero), then 7 is rounded to 8 by the round-even rule, despite the
     fact that 6 is also representable on two bits, and is closer to 6.5
     than 8.

 -- Function: int mpfr_frac (mpfr_t ROP, mpfr_t OP, mpfr_rnd_t RND)
     Set ROP to the fractional part of OP, having the same sign as OP,
     rounded in the direction RND (unlike in ‘mpfr_rint’, RND affects
     only how the exact fractional part is rounded, not how the
     fractional part is generated).  When OP is an integer or an
     infinity, set ROP to zero with the same sign as OP.

 -- Function: int mpfr_modf (mpfr_t IOP, mpfr_t FOP, mpfr_t OP,
          mpfr_rnd_t RND)
     Set simultaneously IOP to the integral part of OP and FOP to the
     fractional part of OP, rounded in the direction RND with the
     corresponding precision of IOP and FOP (equivalent to
     ‘mpfr_trunc(IOP, OP, RND)’ and ‘mpfr_frac(FOP, OP, RND)’).  The
     variables IOP and FOP must be different.  Return 0 iff both results
     are exact (see ‘mpfr_sin_cos’ for a more detailed description of
     the return value).

 -- Function: int mpfr_fmod (mpfr_t R, mpfr_t X, mpfr_t Y, mpfr_rnd_t
          RND)
 -- Function: int mpfr_fmod_ui (mpfr_t R, mpfr_t X, unsigned long int Y,
          mpfr_rnd_t RND)
 -- Function: int mpfr_fmodquo (mpfr_t R, long int* Q, mpfr_t X, mpfr_t
          Y, mpfr_rnd_t RND)
 -- Function: int mpfr_remainder (mpfr_t R, mpfr_t X, mpfr_t Y,
          mpfr_rnd_t RND)
 -- Function: int mpfr_remquo (mpfr_t R, long int* Q, mpfr_t X, mpfr_t
          Y, mpfr_rnd_t RND)
     Set R to the value of X − NY, rounded according to the direction
     RND, where N is the integer quotient of X divided by Y, defined as
     follows: N is rounded toward zero for ‘mpfr_fmod’, ‘mpfr_fmod_ui’
     and ‘mpfr_fmodquo’, and to the nearest integer (ties rounded to
     even) for ‘mpfr_remainder’ and ‘mpfr_remquo’.

     Special values are handled as described in Section F.9.7.1 of the
     ISO C99 standard: If X is infinite or Y is zero, R is NaN.  If Y is
     infinite and X is finite, R is X rounded to the precision of R.  If
     R is zero, it has the sign of X.  The return value is the ternary
     value corresponding to R.

     Additionally, ‘mpfr_fmodquo’ and ‘mpfr_remquo’ store the low
     significant bits from the quotient N in *Q (more precisely the
     number of bits in a ‘long int’ minus one), with the sign of X
     divided by Y (except if those low bits are all zero, in which case
     zero is returned).  If the result is NaN, the value of *Q is
     unspecified.  Note that X may be so large in magnitude relative to
     Y that an exact representation of the quotient is not practical.
     The ‘mpfr_remainder’ and ‘mpfr_remquo’ functions are useful for
     additive argument reduction.

 -- Function: int mpfr_integer_p (mpfr_t OP)
     Return non-zero iff OP is an integer.


File: mpfr.info,  Node: Rounding-Related Functions,  Next: Miscellaneous Functions,  Prev: Integer and Remainder Related Functions,  Up: MPFR Interface

5.11 Rounding-Related Functions
===============================

 -- Function: void mpfr_set_default_rounding_mode (mpfr_rnd_t RND)
     Set the default rounding mode to RND.  The default rounding mode is
     to nearest initially.

 -- Function: mpfr_rnd_t mpfr_get_default_rounding_mode (void)
     Get the default rounding mode.

 -- Function: int mpfr_prec_round (mpfr_t X, mpfr_prec_t PREC,
          mpfr_rnd_t RND)
     Round X according to RND with precision PREC, which must be an
     integer between ‘MPFR_PREC_MIN’ and ‘MPFR_PREC_MAX’ (otherwise the
     behavior is undefined).  If PREC is greater than or equal to the
     precision of X, then new space is allocated for the significand,
     and it is filled with zeros.  Otherwise, the significand is rounded
     to precision PREC with the given direction; no memory reallocation
     to free the unused limbs is done.  In both cases, the precision of
     X is changed to PREC.

     Here is an example of how to use ‘mpfr_prec_round’ to implement
     Newton’s algorithm to compute the inverse of A, assuming X is
     already an approximation to N bits:
          mpfr_set_prec (t, 2 * n);
          mpfr_set (t, a, MPFR_RNDN);         /* round a to 2n bits */
          mpfr_mul (t, t, x, MPFR_RNDN);      /* t is correct to 2n bits */
          mpfr_ui_sub (t, 1, t, MPFR_RNDN);   /* high n bits cancel with 1 */
          mpfr_prec_round (t, n, MPFR_RNDN);  /* t is correct to n bits */
          mpfr_mul (t, t, x, MPFR_RNDN);      /* t is correct to n bits */
          mpfr_prec_round (x, 2 * n, MPFR_RNDN); /* exact */
          mpfr_add (x, x, t, MPFR_RNDN);      /* x is correct to 2n bits */

     Warning!  You must not use this function if X was initialized with
     ‘MPFR_DECL_INIT’ or with ‘mpfr_custom_init_set’ (*note Custom
     Interface::).

 -- Function: int mpfr_can_round (mpfr_t B, mpfr_exp_t ERR, mpfr_rnd_t
          RND1, mpfr_rnd_t RND2, mpfr_prec_t PREC)
     Assuming B is an approximation of an unknown number X in the
     direction RND1 with error at most two to the power EXP(B) − ERR
     where EXP(B) is the exponent of B, return a non-zero value if one
     is able to round correctly X to precision PREC with the direction
     RND2 assuming an unbounded exponent range, and 0 otherwise
     (including for NaN and Inf).  In other words, if the error on B is
     bounded by two to the power K ulps, and B has precision PREC, you
     should give ERR = PREC − K.  This function *does not modify* its
     arguments.

     If RND1 is ‘MPFR_RNDN’ or ‘MPFR_RNDF’, the error is considered to
     be either positive or negative, thus the possible range is twice as
     large as with a directed rounding for RND1 (with the same value of
     ERR).

     When RND2 is ‘MPFR_RNDF’, let RND3 be the opposite direction if
     RND1 is a directed rounding, and ‘MPFR_RNDN’ if RND1 is ‘MPFR_RNDN’
     or ‘MPFR_RNDF’.  The returned value of ‘mpfr_can_round (b, err,
     rnd1, MPFR_RNDF, prec)’ is non-zero iff after the call ‘mpfr_set
     (y, b, rnd3)’ with Y of precision PREC, Y is guaranteed to be a
     faithful rounding of X.

     Note: The *note ternary value:: cannot be determined in general
     with this function.  However, if it is known that the exact value
     is not exactly representable in precision PREC, then one can use
     the following trick to determine the (non-zero) ternary value in
     any rounding mode RND2 (note that ‘MPFR_RNDZ’ below can be replaced
     by any directed rounding mode):
          if (mpfr_can_round (b, err, MPFR_RNDN, MPFR_RNDZ,
                              prec + (rnd2 == MPFR_RNDN)))
            {
              /* round the approximation b to the result r of prec bits
                 with rounding mode rnd2 and get the ternary value inex */
              inex = mpfr_set (r, b, rnd2);
            }
     Indeed, if RND2 is ‘MPFR_RNDN’, this will check if one can round to
     PREC + 1 bits with a directed rounding: if so, one can surely round
     to nearest to PREC bits, and in addition one can determine the
     correct ternary value, which would not be the case when B is near
     from a value exactly representable on PREC bits.

     A detailed example is available in the ‘examples’ subdirectory,
     file ‘can_round.c’.

 -- Function: mpfr_prec_t mpfr_min_prec (mpfr_t X)
     Return the minimal number of bits required to store the significand
     of X, and 0 for special values, including 0.

 -- Function: const char * mpfr_print_rnd_mode (mpfr_rnd_t RND)
     Return a string (‘"MPFR_RNDN"’, ‘"MPFR_RNDZ"’, ‘"MPFR_RNDU"’,
     ‘"MPFR_RNDD"’, ‘"MPFR_RNDA"’, ‘"MPFR_RNDF"’) corresponding to the
     rounding mode RND, or a null pointer if RND is an invalid rounding
     mode.

 -- Macro: int mpfr_round_nearest_away (int (FOO)(mpfr_t, type1_t, ...,
          mpfr_rnd_t), mpfr_t ROP, type1_t OP, ...)
     Given a function FOO and one or more values OP (which may be a
     ‘mpfr_t’, a ‘long int’, a ‘double’, etc.), put in ROP the
     round-to-nearest-away rounding of ‘FOO(OP,...)’.  This rounding is
     defined in the same way as round-to-nearest-even, except in case of
     tie, where the value away from zero is returned.  The function FOO
     takes as input, from second to penultimate argument(s), the
     argument list given after ROP, a rounding mode as final argument,
     puts in its first argument the value ‘FOO(OP,...)’ rounded
     according to this rounding mode, and returns the corresponding
     ternary value (which is expected to be correct, otherwise
     ‘mpfr_round_nearest_away’ will not work as desired).  Due to
     implementation constraints, this function must not be called when
     the minimal exponent EMIN is the smallest possible one.  This macro
     has been made such that the compiler is able to detect mismatch
     between the argument list OP and the function prototype of FOO.
     Multiple input arguments OP are supported only with C99 compilers.
     Otherwise, for C90 compilers, only one such argument is supported.

     Note: this macro is experimental and its interface might change in
     future versions.
          unsigned long ul;
          mpfr_t f, r;
          /* Code that inits and sets r, f, and ul, and if needed sets emin */
          int i = mpfr_round_nearest_away (mpfr_add_ui, r, f, ul);


File: mpfr.info,  Node: Miscellaneous Functions,  Next: Exception Related Functions,  Prev: Rounding-Related Functions,  Up: MPFR Interface

5.12 Miscellaneous Functions
============================

 -- Function: void mpfr_nexttoward (mpfr_t X, mpfr_t Y)
     If X or Y is NaN, set X to NaN; note that the NaN flag is set as
     usual.  If X and Y are equal, X is unchanged.  Otherwise, if X is
     different from Y, replace X by the next floating-point number (with
     the precision of X and the current exponent range) in the direction
     of Y (the infinite values are seen as the smallest and largest
     floating-point numbers).  If the result is zero, it keeps the same
     sign.  No underflow, overflow, or inexact exception is raised.

     Note: Concerning the exceptions and the sign of 0, the behavior
     differs from the ISO C ‘nextafter’ and ‘nexttoward’ functions.  It
     is similar to the nextUp and nextDown operations from IEEE 754
     (introduced in its 2008 revision).

 -- Function: void mpfr_nextabove (mpfr_t X)
 -- Function: void mpfr_nextbelow (mpfr_t X)
     Equivalent to ‘mpfr_nexttoward’ where Y is +Inf (resp. −Inf).

 -- Function: int mpfr_min (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
 -- Function: int mpfr_max (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set ROP to the minimum (resp. maximum) of OP1 and OP2.  If OP1 and
     OP2 are both NaN, then ROP is set to NaN.  If OP1 or OP2 is NaN,
     then ROP is set to the numeric value.  If OP1 and OP2 are zeros of
     different signs, then ROP is set to −0 (resp. +0).  As usual, the
     NaN flag is set only when the result is NaN, i.e., when both OP1
     and OP2 are NaN.

     Note: These functions correspond to the minimumNumber and
     maximumNumber operations of IEEE 754-2019 for the result.  But in
     MPFR, the NaN flag is set only when _both_ operands are NaN.

 -- Function: int mpfr_urandomb (mpfr_t ROP, gmp_randstate_t STATE)
     Generate a uniformly distributed random float in the interval
     0 <= ROP < 1.  More precisely, the number can be seen as a float
     with a random non-normalized significand and exponent 0, which is
     then normalized (thus if E denotes the exponent after
     normalization, then the least −E significant bits of the
     significand are always 0).

     Return 0, unless the exponent is not in the current exponent range,
     in which case ROP is set to NaN and a non-zero value is returned
     (this should never happen in practice, except in very specific
     cases).  The second argument is a ‘gmp_randstate_t’ structure,
     which should be created using the GMP ‘gmp_randinit’ function (see
     the GMP manual).

     Note: for a given version of MPFR, the returned value of ROP and
     the new value of STATE (which controls further random values) do
     not depend on the machine word size.

 -- Function: int mpfr_urandom (mpfr_t ROP, gmp_randstate_t STATE,
          mpfr_rnd_t RND)
     Generate a uniformly distributed random float.  The floating-point
     number ROP can be seen as if a random real number is generated
     according to the continuous uniform distribution on the interval
     [0, 1] and then rounded in the direction RND.

     The second argument is a ‘gmp_randstate_t’ structure, which should
     be created using the GMP ‘gmp_randinit’ function (see the GMP
     manual).

     Note: the note for ‘mpfr_urandomb’ holds too.  Moreover, the exact
     number (the random value to be rounded) and the next random state
     do not depend on the current exponent range and the rounding mode.
     However, they depend on the target precision: from the same state
     of the random generator, if the precision of the destination is
     changed, then the value may be completely different (and the state
     of the random generator is different too).

 -- Function: int mpfr_nrandom (mpfr_t ROP1, gmp_randstate_t STATE,
          mpfr_rnd_t RND)
 -- Function: int mpfr_grandom (mpfr_t ROP1, mpfr_t ROP2,
          gmp_randstate_t STATE, mpfr_rnd_t RND)
     Generate one (possibly two for ‘mpfr_grandom’) random
     floating-point number according to a standard normal Gaussian
     distribution (with mean zero and variance one).  For
     ‘mpfr_grandom’, if ROP2 is a null pointer, then only one value is
     generated and stored in ROP1.

     The floating-point number ROP1 (and ROP2) can be seen as if a
     random real number were generated according to the standard normal
     Gaussian distribution and then rounded in the direction RND.

     The ‘gmp_randstate_t’ argument should be created using the GMP
     ‘gmp_randinit’ function (see the GMP manual).

     For ‘mpfr_grandom’, the combination of the ternary values is
     returned like with ‘mpfr_sin_cos’.  If ROP2 is a null pointer, the
     second ternary value is assumed to be 0 (note that the encoding of
     the only ternary value is not the same as the usual encoding for
     functions that return only one result).  Otherwise the ternary
     value of a random number is always non-zero.

     Note: the note for ‘mpfr_urandomb’ holds too.  In addition, the
     exponent range and the rounding mode might have a side effect on
     the next random state.

     Note: ‘mpfr_nrandom’ is much more efficient than ‘mpfr_grandom’,
     especially for large precision.  Thus ‘mpfr_grandom’ is marked as
     deprecated and will be removed in a future release.

 -- Function: int mpfr_erandom (mpfr_t ROP1, gmp_randstate_t STATE,
          mpfr_rnd_t RND)
     Generate one random floating-point number according to an
     exponential distribution, with mean one.  Other characteristics are
     identical to ‘mpfr_nrandom’.

 -- Function: mpfr_exp_t mpfr_get_exp (mpfr_t X)
     Return the exponent of X, assuming that X is a non-zero ordinary
     number and the significand is considered in [1/2,1).  For this
     function, X is allowed to be outside of the current range of
     acceptable values.  The behavior for NaN, infinity or zero is
     undefined.

 -- Function: int mpfr_set_exp (mpfr_t X, mpfr_exp_t E)
     Set the exponent of X to E if X is a non-zero ordinary number and E
     is in the current exponent range, and return 0; otherwise, return a
     non-zero value (X is not changed).

 -- Function: int mpfr_signbit (mpfr_t OP)
     Return a non-zero value iff OP has its sign bit set (i.e., if it is
     negative, −0, or a NaN whose representation has its sign bit set).

 -- Function: int mpfr_setsign (mpfr_t ROP, mpfr_t OP, int S, mpfr_rnd_t
          RND)
     Set the value of ROP from OP, rounded toward the given direction
     RND, then set (resp. clear) its sign bit if S is non-zero (resp.
     zero), even when OP is a NaN.

 -- Function: int mpfr_copysign (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Set the value of ROP from OP1, rounded toward the given direction
     RND, then set its sign bit to that of OP2 (even when OP1 or OP2 is
     a NaN).  This function is equivalent to ‘mpfr_setsign (ROP, OP1,
     mpfr_signbit (OP2), RND)’.

 -- Function: const char * mpfr_get_version (void)
     Return the MPFR version, as a null-terminated string.

 -- Macro: MPFR_VERSION
 -- Macro: MPFR_VERSION_MAJOR
 -- Macro: MPFR_VERSION_MINOR
 -- Macro: MPFR_VERSION_PATCHLEVEL
 -- Macro: MPFR_VERSION_STRING
     ‘MPFR_VERSION’ is the version of MPFR as a preprocessing constant.
     ‘MPFR_VERSION_MAJOR’, ‘MPFR_VERSION_MINOR’ and
     ‘MPFR_VERSION_PATCHLEVEL’ are respectively the major, minor and
     patch level of MPFR version, as preprocessing constants.
     ‘MPFR_VERSION_STRING’ is the version (with an optional suffix, used
     in development and pre-release versions) as a string constant,
     which can be compared to the result of ‘mpfr_get_version’ to check
     at run time the header file and library used match:
          if (strcmp (mpfr_get_version (), MPFR_VERSION_STRING))
            fprintf (stderr, "Warning: header and library do not match\n");
     Note: Obtaining different strings is not necessarily an error, as
     in general, a program compiled with some old MPFR version can be
     dynamically linked with a newer MPFR library version (if allowed by
     the library versioning system).

 -- Macro: long MPFR_VERSION_NUM (MAJOR, MINOR, PATCHLEVEL)
     Create an integer in the same format as used by ‘MPFR_VERSION’ from
     the given MAJOR, MINOR and PATCHLEVEL.  Here is an example of how
     to check the MPFR version at compile time:
          #if (!defined(MPFR_VERSION) || (MPFR_VERSION < MPFR_VERSION_NUM(3,0,0)))
          # error "Wrong MPFR version."
          #endif

 -- Function: const char * mpfr_get_patches (void)
     Return a null-terminated string containing the ids of the patches
     applied to the MPFR library (contents of the ‘PATCHES’ file),
     separated by spaces.  Note: If the program has been compiled with
     an older MPFR version and is dynamically linked with a new MPFR
     library version, the identifiers of the patches applied to the old
     (compile-time) MPFR version are not available (however, this
     information should not have much interest in general).

 -- Function: int mpfr_buildopt_tls_p (void)
     Return a non-zero value if MPFR was compiled as thread safe using
     compiler-level Thread-Local Storage (that is, MPFR was built with
     the ‘--enable-thread-safe’ configure option, see ‘INSTALL’ file),
     return zero otherwise.

 -- Function: int mpfr_buildopt_float128_p (void)
     Return a non-zero value if MPFR was compiled with ‘_Float128’
     support (that is, MPFR was built with the ‘--enable-float128’
     configure option), return zero otherwise.

 -- Function: int mpfr_buildopt_decimal_p (void)
     Return a non-zero value if MPFR was compiled with decimal float
     support (that is, MPFR was built with the ‘--enable-decimal-float’
     configure option), return zero otherwise.

 -- Function: int mpfr_buildopt_gmpinternals_p (void)
     Return a non-zero value if MPFR was compiled with GMP internals
     (that is, MPFR was built with either ‘--with-gmp-build’ or
     ‘--enable-gmp-internals’ configure option), return zero otherwise.

 -- Function: int mpfr_buildopt_sharedcache_p (void)
     Return a non-zero value if MPFR was compiled so that all threads
     share the same cache for one MPFR constant, like ‘mpfr_const_pi’ or
     ‘mpfr_const_log2’ (that is, MPFR was built with the
     ‘--enable-shared-cache’ configure option), return zero otherwise.
     If the return value is non-zero, MPFR applications may need to be
     compiled with the ‘-pthread’ option.

 -- Function: const char * mpfr_buildopt_tune_case (void)
     Return a string saying which thresholds file has been used at
     compile time.  This file is normally selected from the processor
     type.


File: mpfr.info,  Node: Exception Related Functions,  Next: Memory Handling Functions,  Prev: Miscellaneous Functions,  Up: MPFR Interface

5.13 Exception Related Functions
================================

 -- Function: mpfr_exp_t mpfr_get_emin (void)
 -- Function: mpfr_exp_t mpfr_get_emax (void)
     Return the (current) smallest and largest exponents allowed for a
     floating-point variable.  The smallest positive value of a
     floating-point variable is one half times 2 raised to the smallest
     exponent and the largest value has the form (1 − epsilon) times 2
     raised to the largest exponent, where epsilon depends on the
     precision of the considered variable.

 -- Function: int mpfr_set_emin (mpfr_exp_t EXP)
 -- Function: int mpfr_set_emax (mpfr_exp_t EXP)
     Set the smallest and largest exponents allowed for a floating-point
     variable.  Return a non-zero value when EXP is not in the range
     accepted by the implementation (in that case the smallest or
     largest exponent is not changed), and zero otherwise.

     For the subsequent operations, it is the user’s responsibility to
     check that any floating-point value used as an input is in the new
     exponent range (for example using ‘mpfr_check_range’).  If a
     floating-point value outside the new exponent range is used as an
     input, the default behavior is undefined, in the sense of the ISO C
     standard; the behavior may also be explicitly documented, such as
     for ‘mpfr_check_range’.

     Note: Caches may still have values outside the current exponent
     range.  This is not an issue as the user cannot use these caches
     directly via the API (MPFR extends the exponent range internally
     when need be).

     If EMIN > EMAX and a floating-point value needs to be produced as
     output, the behavior is undefined (‘mpfr_set_emin’ and
     ‘mpfr_set_emax’ do not check this condition as it might occur
     between successive calls to these two functions).

 -- Function: mpfr_exp_t mpfr_get_emin_min (void)
 -- Function: mpfr_exp_t mpfr_get_emin_max (void)
 -- Function: mpfr_exp_t mpfr_get_emax_min (void)
 -- Function: mpfr_exp_t mpfr_get_emax_max (void)
     Return the minimum and maximum of the exponents allowed for
     ‘mpfr_set_emin’ and ‘mpfr_set_emax’ respectively.  These values are
     implementation dependent, thus a program using
     ‘mpfr_set_emax(mpfr_get_emax_max())’ or
     ‘mpfr_set_emin(mpfr_get_emin_min())’ may not be portable.

 -- Function: int mpfr_check_range (mpfr_t X, int T, mpfr_rnd_t RND)
     This function assumes that X is the correctly rounded value of some
     real value Y in the direction RND and some extended exponent range,
     and that T is the corresponding *note ternary value::.  For
     example, one performed ‘t = mpfr_log (x, u, rnd)’, and Y is the
     exact logarithm of U.  Thus T is negative if X is smaller than Y,
     positive if X is larger than Y, and zero if X equals Y.  This
     function modifies X if needed to be in the current range of
     acceptable values: It generates an underflow or an overflow if the
     exponent of X is outside the current allowed range; the value of T
     may be used to avoid a double rounding.  This function returns zero
     if the new value of X equals the exact one Y, a positive value if
     that new value is larger than Y, and a negative value if it is
     smaller than Y.  Note that unlike most functions, the new result X
     is compared to the (unknown) exact one Y, not the input value X,
     i.e., the ternary value is propagated.

     Note: If X is an infinity and T is different from zero (i.e., if
     the rounded result is an inexact infinity), then the overflow flag
     is set.  This is useful because ‘mpfr_check_range’ is typically
     called (at least in MPFR functions) after restoring the flags that
     could have been set due to internal computations.

 -- Function: int mpfr_subnormalize (mpfr_t X, int T, mpfr_rnd_t RND)
     This function rounds X emulating subnormal number arithmetic: if X
     is outside the subnormal exponent range of the emulated
     floating-point system, this function just propagates the *note
     ternary value:: T; otherwise, if EXP(X) denotes the exponent of X,
     it rounds X to precision EXP(X)−EMIN+1 according to rounding mode
     RND and previous ternary value T, avoiding double rounding
     problems.  More precisely in the subnormal domain, denoting by e
     the value of EMIN, X is rounded in fixed-point arithmetic to an
     integer multiple of two to the power e − 1; as a consequence, 1.5
     multiplied by two to the power e − 1 when T is zero is rounded to
     two to the power e with rounding to nearest.

     The precision PREC(X) of X is not modified by this function.  RND
     and T must be the rounding mode and the returned ternary value used
     when computing X (as in ‘mpfr_check_range’).  The subnormal
     exponent range is from EMIN to EMIN+PREC(X)−1.  If the result
     cannot be represented in the current exponent range of MPFR (due to
     a too small EMAX), the behavior is undefined.  Note that unlike
     most functions, the result is compared to the exact one, not the
     input value X, i.e., the ternary value is propagated.

     As usual, if the returned ternary value is non zero, the inexact
     flag is set.  Moreover, if a second rounding occurred (because the
     input X was in the subnormal range), the underflow flag is set.

     Warning!  If you change EMIN (with ‘mpfr_set_emin’) just before
     calling ‘mpfr_subnormalize’, you need to make sure that the value
     is in the current exponent range of MPFR.  But it is better to
     change EMIN before any computation, if possible.

   This is an example of how to emulate binary64 IEEE 754 arithmetic
(a.k.a. double precision) using MPFR:

     {
       mpfr_t xa, xb; int i; volatile double a, b;

       mpfr_set_default_prec (53);
       mpfr_set_emin (-1073); mpfr_set_emax (1024);

       mpfr_init (xa); mpfr_init (xb);

       b = 34.3; mpfr_set_d (xb, b, MPFR_RNDN);
       a = 0x1.1235P-1021; mpfr_set_d (xa, a, MPFR_RNDN);

       a /= b;
       i = mpfr_div (xa, xa, xb, MPFR_RNDN);
       i = mpfr_subnormalize (xa, i, MPFR_RNDN); /* new ternary value */

       mpfr_clear (xa); mpfr_clear (xb);
     }

   Note that ‘mpfr_set_emin’ and ‘mpfr_set_emax’ are called early enough
in order to make sure that all computed values are in the current
exponent range.  Warning!  This emulates a double IEEE 754 arithmetic
with correct rounding in the subnormal range, which may not be the case
for your hardware.

   Below is another example showing how to emulate fixed-point
arithmetic in a specific case.  Here we compute the sine of the integers
1 to 17 with a result in a fixed-point arithmetic rounded at two to the
power −42 (using the fact that the result is at most 1 in absolute
value):

     {
       mpfr_t x; int i, inex;

       mpfr_set_emin (-41);
       mpfr_init2 (x, 42);
       for (i = 1; i <= 17; i++)
         {
           mpfr_set_ui (x, i, MPFR_RNDN);
           inex = mpfr_sin (x, x, MPFR_RNDZ);
           mpfr_subnormalize (x, inex, MPFR_RNDZ);
           mpfr_dump (x);
         }
       mpfr_clear (x);
     }

 -- Function: void mpfr_clear_underflow (void)
 -- Function: void mpfr_clear_overflow (void)
 -- Function: void mpfr_clear_divby0 (void)
 -- Function: void mpfr_clear_nanflag (void)
 -- Function: void mpfr_clear_inexflag (void)
 -- Function: void mpfr_clear_erangeflag (void)
     Clear (lower) the underflow, overflow, divide-by-zero, invalid,
     inexact and _erange_ flags.

 -- Function: void mpfr_clear_flags (void)
     Clear (lower) all global flags (underflow, overflow,
     divide-by-zero, invalid, inexact, _erange_).  Note: a group of
     flags can be cleared by using ‘mpfr_flags_clear’.

 -- Function: void mpfr_set_underflow (void)
 -- Function: void mpfr_set_overflow (void)
 -- Function: void mpfr_set_divby0 (void)
 -- Function: void mpfr_set_nanflag (void)
 -- Function: void mpfr_set_inexflag (void)
 -- Function: void mpfr_set_erangeflag (void)
     Set (raise) the underflow, overflow, divide-by-zero, invalid,
     inexact and _erange_ flags.

 -- Function: int mpfr_underflow_p (void)
 -- Function: int mpfr_overflow_p (void)
 -- Function: int mpfr_divby0_p (void)
 -- Function: int mpfr_nanflag_p (void)
 -- Function: int mpfr_inexflag_p (void)
 -- Function: int mpfr_erangeflag_p (void)
     Return the corresponding (underflow, overflow, divide-by-zero,
     invalid, inexact, _erange_) flag, which is non-zero iff the flag is
     set.

   The ‘mpfr_flags_’ functions below that take an argument MASK can
operate on any subset of the exception flags: a flag is part of this
subset (or group) if and only if the corresponding bit of the argument
MASK is set.  The ‘MPFR_FLAGS_’ macros will normally be used to build
this argument.  *Note Exceptions::.

 -- Function: void mpfr_flags_clear (mpfr_flags_t MASK)
     Clear (lower) the group of flags specified by MASK.

 -- Function: void mpfr_flags_set (mpfr_flags_t MASK)
     Set (raise) the group of flags specified by MASK.

 -- Function: mpfr_flags_t mpfr_flags_test (mpfr_flags_t MASK)
     Return the flags specified by MASK.  To test whether any flag from
     MASK is set, compare the return value to 0.  You can also test
     individual flags by AND’ing the result with ‘MPFR_FLAGS_’ macros.
     Example:
          mpfr_flags_t t = mpfr_flags_test (MPFR_FLAGS_UNDERFLOW|
                                            MPFR_FLAGS_OVERFLOW)
          ...
          if (t)  /* underflow and/or overflow (unlikely) */
            {
              if (t & MPFR_FLAGS_UNDERFLOW)  { /* handle underflow */ }
              if (t & MPFR_FLAGS_OVERFLOW)   { /* handle overflow  */ }
            }

 -- Function: mpfr_flags_t mpfr_flags_save (void)
     Return all the flags.  It is equivalent to
     ‘mpfr_flags_test(MPFR_FLAGS_ALL)’.

 -- Function: void mpfr_flags_restore (mpfr_flags_t FLAGS, mpfr_flags_t
          MASK)
     Restore the flags specified by MASK to their state represented in
     FLAGS.


File: mpfr.info,  Node: Memory Handling Functions,  Next: Compatibility with MPF,  Prev: Exception Related Functions,  Up: MPFR Interface

5.14 Memory Handling Functions
==============================

These are general functions concerning memory handling (*note Memory
Handling::, for more information).

 -- Function: void mpfr_free_cache (void)
     Free all caches and pools used by MPFR internally (those local to
     the current thread and those shared by all threads).  You should
     call this function before terminating a thread, even if you did not
     call ‘mpfr_const_*’ functions directly (they could have been called
     internally).

 -- Function: void mpfr_free_cache2 (mpfr_free_cache_t WAY)
     Free various caches and pools used by MPFR internally, as specified
     by WAY, which is a set of flags:
        • those local to the current thread if flag
          ‘MPFR_FREE_LOCAL_CACHE’ is set;
        • those shared by all threads if flag ‘MPFR_FREE_GLOBAL_CACHE’
          is set.
     The other bits of WAY are currently ignored and are reserved for
     future use; they should be zero.

     Note: ‘mpfr_free_cache2 (MPFR_FREE_LOCAL_CACHE |
     MPFR_FREE_GLOBAL_CACHE)’ is currently equivalent to
     ‘mpfr_free_cache()’.

 -- Function: void mpfr_free_pool (void)
     Free the pools used by MPFR internally.  Note: This function is
     automatically called after the thread-local caches are freed (with
     ‘mpfr_free_cache’ or ‘mpfr_free_cache2’).

 -- Function: int mpfr_mp_memory_cleanup (void)
     This function should be called before calling
     ‘mp_set_memory_functions’.  *Note Memory Handling::, for more
     information.  Zero is returned in case of success, non-zero in case
     of error.  Errors are currently not possible, but checking the
     return value is recommended for future compatibility.


File: mpfr.info,  Node: Compatibility with MPF,  Next: Custom Interface,  Prev: Memory Handling Functions,  Up: MPFR Interface

5.15 Compatibility With MPF
===========================

A header file ‘mpf2mpfr.h’ is included in the distribution of MPFR for
compatibility with the GNU MP class MPF.  By inserting the following two
lines after the ‘#include <gmp.h>’ line,
     #include <mpfr.h>
     #include <mpf2mpfr.h>
many programs written for MPF can be compiled directly against MPFR
without any changes.  All operations are then performed with the default
MPFR rounding mode, which can be reset with
‘mpfr_set_default_rounding_mode’.

   Warning!  There are some differences.  In particular:
   • The precision is different: MPFR rounds to the exact number of bits
     (zeroing trailing bits in the internal representation).  Users may
     need to increase the precision of their variables.
   • The exponent range is also different.
   • The formatted output functions (‘gmp_printf’, etc.)  will not work
     for arguments of arbitrary-precision floating-point type (‘mpf_t’,
     which ‘mpf2mpfr.h’ redefines as ‘mpfr_t’).
   • The output of ‘mpf_out_str’ has a format slightly different from
     the one of ‘mpfr_out_str’ (concerning the position of the
     decimal-point character, trailing zeros and the output of the value
     0).

 -- Function: void mpfr_set_prec_raw (mpfr_t X, mpfr_prec_t PREC)
     Reset the precision of X to be *exactly* PREC bits.  The only
     difference with ‘mpfr_set_prec’ is that PREC is assumed to be small
     enough so that the significand fits into the current allocated
     memory space for X.  Otherwise the behavior is undefined.

 -- Function: int mpfr_eq (mpfr_t OP1, mpfr_t OP2, unsigned long int
          OP3)
     Return non-zero if OP1 and OP2 are both non-zero ordinary numbers
     with the same exponent and the same first OP3 bits, both zero, or
     both infinities of the same sign.  Return zero otherwise.  This
     function is defined for compatibility with MPF, we do not recommend
     to use it otherwise.  Do not use it either if you want to know
     whether two numbers are close to each other; for instance, 1.011111
     and 1.100000 are regarded as different for any value of OP3 larger
     than 1.

 -- Function: void mpfr_reldiff (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2,
          mpfr_rnd_t RND)
     Compute the relative difference between OP1 and OP2 and store the
     result in ROP.  This function does not guarantee the correct
     rounding on the relative difference; it just computes
     |OP1 − OP2| / OP1, using the precision of ROP and the rounding mode
     RND for all operations.

 -- Function: int mpfr_mul_2exp (mpfr_t ROP, mpfr_t OP1, unsigned long
          int OP2, mpfr_rnd_t RND)
 -- Function: int mpfr_div_2exp (mpfr_t ROP, mpfr_t OP1, unsigned long
          int OP2, mpfr_rnd_t RND)
     These functions are identical to ‘mpfr_mul_2ui’ and ‘mpfr_div_2ui’
     respectively.  These functions are only kept for compatibility with
     MPF, one should prefer ‘mpfr_mul_2ui’ and ‘mpfr_div_2ui’ otherwise.


File: mpfr.info,  Node: Custom Interface,  Next: Internals,  Prev: Compatibility with MPF,  Up: MPFR Interface

5.16 Custom Interface
=====================

Some applications use a stack to handle the memory and their objects.
However, the MPFR memory design is not well suited for such a thing.  So
that such applications are able to use MPFR, an auxiliary memory
interface has been created: the Custom Interface.

   The following interface allows one to use MPFR in two ways:

   • Either directly store a floating-point number as a ‘mpfr_t’ on the
     stack.

   • Either store its own representation on the stack and construct a
     new temporary ‘mpfr_t’ each time it is needed.

   Nothing has to be done to destroy the floating-point numbers except
garbaging the used memory: all the memory management (allocating,
destroying, garbaging) is left to the application.

   Each function in this interface is also implemented as a macro for
efficiency reasons: for example ‘mpfr_custom_init (s, p)’ uses the
macro, while ‘(mpfr_custom_init) (s, p)’ uses the function.  The
‘mpfr_custom_init_set’ macro is not usable in contexts where an
expression is expected, e.g., inside ‘for(...)’ or before a comma
operator.

   Note 1: MPFR functions may still initialize temporary floating-point
numbers using ‘mpfr_init’ and similar functions.  See Custom Allocation
(GNU MP).

   Note 2: MPFR functions may use the cached functions (‘mpfr_const_pi’
for example), even if they are not explicitly called.  You have to call
‘mpfr_free_cache’ each time you garbage the memory iff ‘mpfr_init’,
through GMP Custom Allocation, allocates its memory on the application
stack.

 -- Function: size_t mpfr_custom_get_size (mpfr_prec_t PREC)
     Return the needed size in bytes to store the significand of a
     floating-point number of precision PREC.

 -- Function: void mpfr_custom_init (void *SIGNIFICAND, mpfr_prec_t
          PREC)
     Initialize a significand of precision PREC, where SIGNIFICAND must
     be an area of ‘mpfr_custom_get_size (prec)’ bytes at least and be
     suitably aligned for an array of ‘mp_limb_t’ (GMP type, *note
     Internals::).

 -- Function: void mpfr_custom_init_set (mpfr_t X, int KIND, mpfr_exp_t
          EXP, mpfr_prec_t PREC, void *SIGNIFICAND)
     Perform a dummy initialization of a ‘mpfr_t’ and set it to:
        • if abs(KIND) = ‘MPFR_NAN_KIND’, X is set to NaN;
        • if abs(KIND) = ‘MPFR_INF_KIND’, X is set to the infinity of
          the same sign as KIND;
        • if abs(KIND) = ‘MPFR_ZERO_KIND’, X is set to the zero of the
          same sign as KIND;
        • if abs(KIND) = ‘MPFR_REGULAR_KIND’, X is set to the regular
          number whose sign is the one of KIND, and whose exponent and
          significand are given by EXP and SIGNIFICAND.
     In all cases, SIGNIFICAND will be used directly for further
     computing involving X.  This function does not allocate anything.
     A floating-point number initialized with this function cannot be
     resized using ‘mpfr_set_prec’ or ‘mpfr_prec_round’, or cleared
     using ‘mpfr_clear’!  The SIGNIFICAND must have been initialized
     with ‘mpfr_custom_init’ using the same precision PREC.

 -- Function: int mpfr_custom_get_kind (mpfr_t X)
     Return the current kind of a ‘mpfr_t’ as created by
     ‘mpfr_custom_init_set’.  The behavior of this function for any
     ‘mpfr_t’ not initialized with ‘mpfr_custom_init_set’ is undefined.

 -- Function: void * mpfr_custom_get_significand (mpfr_t X)
     Return a pointer to the significand used by a ‘mpfr_t’ initialized
     with ‘mpfr_custom_init_set’.  The behavior of this function for any
     ‘mpfr_t’ not initialized with ‘mpfr_custom_init_set’ is undefined.

 -- Function: mpfr_exp_t mpfr_custom_get_exp (mpfr_t X)
     Return the exponent of X, assuming that X is a non-zero ordinary
     number and the significand is considered in [1/2,1).  But if X is
     NaN, infinity or zero, contrary to ‘mpfr_get_exp’ (where the
     behavior is undefined), the return value is here an unspecified,
     valid value of the ‘mpfr_exp_t’ type.  The behavior of this
     function for any ‘mpfr_t’ not initialized with
     ‘mpfr_custom_init_set’ is undefined.

 -- Function: void mpfr_custom_move (mpfr_t X, void *NEW_POSITION)
     Inform MPFR that the significand of X has moved due to a garbage
     collect and update its new position to ‘new_position’.  However,
     the application has to move the significand and the ‘mpfr_t’
     itself.  The behavior of this function for any ‘mpfr_t’ not
     initialized with ‘mpfr_custom_init_set’ is undefined.


File: mpfr.info,  Node: Internals,  Prev: Custom Interface,  Up: MPFR Interface

5.17 Internals
==============

A “limb” means the part of a multi-precision number that fits in a
single word.  Usually a limb contains 32 or 64 bits.  The C data type
for a limb is ‘mp_limb_t’.

   The ‘mpfr_t’ type is internally defined as a one-element array of a
structure, and ‘mpfr_ptr’ is the C data type representing a pointer to
this structure.  The ‘mpfr_t’ type consists of four fields:

   • The ‘_mpfr_prec’ field is used to store the precision of the
     variable (in bits); this is not less than ‘MPFR_PREC_MIN’.

   • The ‘_mpfr_sign’ field is used to store the sign of the variable.

   • The ‘_mpfr_exp’ field stores the exponent.  An exponent of 0 means
     a radix point just above the most significant limb.  Non-zero
     values n are a multiplier 2^n relative to that point.  A NaN, an
     infinity and a zero are indicated by special values of the exponent
     field.

   • Finally, the ‘_mpfr_d’ field is a pointer to the limbs, least
     significant limbs stored first.  The number of limbs in use is
     controlled by ‘_mpfr_prec’, namely
     ceil(‘_mpfr_prec’/‘mp_bits_per_limb’).  Non-singular (i.e.,
     different from NaN, infinity or zero) values always have the most
     significant bit of the most significant limb set to 1.  When the
     precision does not correspond to a whole number of limbs, the
     excess bits at the low end of the data are zeros.


File: mpfr.info,  Node: API Compatibility,  Next: MPFR and the IEEE 754 Standard,  Prev: MPFR Interface,  Up: Top

6 API Compatibility
*******************

The goal of this section is to describe some API changes that occurred
from one version of MPFR to another, and how to write code that can be
compiled and run with older MPFR versions.  The minimum MPFR version
that is considered here is 2.2.0 (released on 20 September 2005).

   API changes can only occur between major or minor versions.  Thus the
patchlevel (the third number in the MPFR version) will be ignored in the
following.  If a program does not use MPFR internals, changes in the
behavior between two versions differing only by the patchlevel should
only result from what was regarded as a bug or unspecified behavior.

   As a general rule, a program written for some MPFR version should
work with later versions, possibly except at a new major version, where
some features (described as obsolete for some time) can be removed.  In
such a case, a failure should occur during compilation or linking.  If a
result becomes incorrect because of such a change, please look at the
various changes below (they are minimal, and most software should be
unaffected), at the FAQ and at the MPFR web page for your version (a bug
could have been introduced and be already fixed); and if the problem is
not mentioned, please send us a bug report (*note Reporting Bugs::).

   However, a program written for the current MPFR version (as
documented by this manual) may not necessarily work with previous
versions of MPFR.  This section should help developers to write portable
code.

   Note: Information given here may be incomplete.  API changes are also
described in the NEWS file (for each version, instead of being
classified like here), together with other changes.

* Menu:

* Type and Macro Changes::
* Added Functions::
* Changed Functions::
* Removed Functions::
* Other Changes::


File: mpfr.info,  Node: Type and Macro Changes,  Next: Added Functions,  Prev: API Compatibility,  Up: API Compatibility

6.1 Type and Macro Changes
==========================

The official type for exponent values changed from ‘mp_exp_t’ to
‘mpfr_exp_t’ in MPFR 3.0.  The type ‘mp_exp_t’ will remain available as
it comes from GMP (with a different meaning).  These types are currently
the same (‘mpfr_exp_t’ is defined as ‘mp_exp_t’ with ‘typedef’), so that
programs can still use ‘mp_exp_t’; but this may change in the future.
Alternatively, using the following code after including ‘mpfr.h’ will
work with official MPFR versions, as ‘mpfr_exp_t’ was never defined in
MPFR 2.x:
     #if MPFR_VERSION_MAJOR < 3
     typedef mp_exp_t mpfr_exp_t;
     #endif

   The official types for precision values and for rounding modes
respectively changed from ‘mp_prec_t’ and ‘mp_rnd_t’ to ‘mpfr_prec_t’
and ‘mpfr_rnd_t’ in MPFR 3.0.  This change was actually done a long time
ago in MPFR, at least since MPFR 2.2.0, with the following code in
‘mpfr.h’:
     #ifndef mp_rnd_t
     # define mp_rnd_t  mpfr_rnd_t
     #endif
     #ifndef mp_prec_t
     # define mp_prec_t mpfr_prec_t
     #endif
   This means that it is safe to use the new official types
‘mpfr_prec_t’ and ‘mpfr_rnd_t’ in your programs.  The types ‘mp_prec_t’
and ‘mp_rnd_t’ (defined in MPFR only) may be removed in the future, as
the prefix ‘mp_’ is reserved by GMP.

   The precision type ‘mpfr_prec_t’ (‘mp_prec_t’) was unsigned before
MPFR 3.0; it is now signed.  ‘MPFR_PREC_MAX’ has not changed, though.
Indeed the MPFR code requires that ‘MPFR_PREC_MAX’ be representable in
the exponent type, which may have the same size as ‘mpfr_prec_t’ but has
always been signed.  The consequence is that valid code that does not
assume anything about the signedness of ‘mpfr_prec_t’ should work with
past and new MPFR versions.  This change was useful as the use of
unsigned types tends to convert signed values to unsigned ones in
expressions due to the usual arithmetic conversions, which can yield
incorrect results if a negative value is converted in such a way.
Warning!  A program assuming (intentionally or not) that ‘mpfr_prec_t’
is signed may be affected by this problem when it is built and run
against MPFR 2.x.

   The rounding modes ‘GMP_RNDx’ were renamed to ‘MPFR_RNDx’ in
MPFR 3.0.  However, the old names ‘GMP_RNDx’ have been kept for
compatibility (this might change in future versions), using:
     #define GMP_RNDN MPFR_RNDN
     #define GMP_RNDZ MPFR_RNDZ
     #define GMP_RNDU MPFR_RNDU
     #define GMP_RNDD MPFR_RNDD
   The rounding mode “round away from zero” (‘MPFR_RNDA’) was added in
MPFR 3.0 (however, no rounding mode ‘GMP_RNDA’ exists).  Faithful
rounding (‘MPFR_RNDF’) was added in MPFR 4.0, but currently, it is
partially supported.

   The flags-related macros, whose name starts with ‘MPFR_FLAGS_’, were
added in MPFR 4.0 (for the new functions ‘mpfr_flags_clear’,
‘mpfr_flags_restore’, ‘mpfr_flags_set’ and ‘mpfr_flags_test’, in
particular).


File: mpfr.info,  Node: Added Functions,  Next: Changed Functions,  Prev: Type and Macro Changes,  Up: API Compatibility

6.2 Added Functions
===================

We give here in alphabetical order the functions (and function-like
macros) that were added after MPFR 2.2, and in which MPFR version.

   • ‘mpfr_acospi’ and ‘mpfr_acosu’ in MPFR 4.2.

   • ‘mpfr_add_d’ in MPFR 2.4.

   • ‘mpfr_ai’ in MPFR 3.0 (incomplete, experimental).

   • ‘mpfr_asinpi’ and ‘mpfr_asinu’ in MPFR 4.2.

   • ‘mpfr_asprintf’ in MPFR 2.4.

   • ‘mpfr_atan2pi’ and ‘mpfr_atan2u’ in MPFR 4.2.

   • ‘mpfr_atanpi’ and ‘mpfr_atanu’ in MPFR 4.2.

   • ‘mpfr_beta’ in MPFR 4.0 (incomplete, experimental).

   • ‘mpfr_buildopt_decimal_p’ in MPFR 3.0.

   • ‘mpfr_buildopt_float128_p’ in MPFR 4.0.

   • ‘mpfr_buildopt_gmpinternals_p’ in MPFR 3.1.

   • ‘mpfr_buildopt_sharedcache_p’ in MPFR 4.0.

   • ‘mpfr_buildopt_tls_p’ in MPFR 3.0.

   • ‘mpfr_buildopt_tune_case’ in MPFR 3.1.

   • ‘mpfr_clear_divby0’ in MPFR 3.1 (new divide-by-zero exception).

   • ‘mpfr_cmpabs_ui’ in MPFR 4.1.

   • ‘mpfr_compound_si’ in MPFR 4.2.

   • ‘mpfr_copysign’ in MPFR 2.3.  Note: MPFR 2.2 had a ‘mpfr_copysign’
     function that was available, but not documented, and with a slight
     difference in the semantics (when the second input operand is a
     NaN).

   • ‘mpfr_cospi’ and ‘mpfr_cosu’ in MPFR 4.2.

   • ‘mpfr_custom_get_significand’ in MPFR 3.0.  This function was named
     ‘mpfr_custom_get_mantissa’ in previous versions;
     ‘mpfr_custom_get_mantissa’ is still available via a macro in
     ‘mpfr.h’:
          #define mpfr_custom_get_mantissa mpfr_custom_get_significand
     Thus code that needs to work with both MPFR 2.x and MPFR 3.x should
     use ‘mpfr_custom_get_mantissa’.

   • ‘mpfr_d_div’ and ‘mpfr_d_sub’ in MPFR 2.4.

   • ‘mpfr_digamma’ in MPFR 3.0.

   • ‘mpfr_divby0_p’ in MPFR 3.1 (new divide-by-zero exception).

   • ‘mpfr_div_d’ in MPFR 2.4.

   • ‘mpfr_dot’ in MPFR 4.1 (incomplete, experimental).

   • ‘mpfr_erandom’ in MPFR 4.0.

   • ‘mpfr_exp2m1’ and ‘mpfr_exp10m1’ in MPFR 4.2.

   • ‘mpfr_flags_clear’, ‘mpfr_flags_restore’, ‘mpfr_flags_save’,
     ‘mpfr_flags_set’ and ‘mpfr_flags_test’ in MPFR 4.0.

   • ‘mpfr_fmma’ and ‘mpfr_fmms’ in MPFR 4.0.

   • ‘mpfr_fmod’ in MPFR 2.4.

   • ‘mpfr_fmodquo’ in MPFR 4.0.

   • ‘mpfr_fmod_ui’ in MPFR 4.2.

   • ‘mpfr_fms’ in MPFR 2.3.

   • ‘mpfr_fpif_export’ and ‘mpfr_fpif_import’ in MPFR 4.0.

   • ‘mpfr_fprintf’ in MPFR 2.4.

   • ‘mpfr_free_cache2’ in MPFR 4.0.

   • ‘mpfr_free_pool’ in MPFR 4.0.

   • ‘mpfr_frexp’ in MPFR 3.1.

   • ‘mpfr_gamma_inc’ in MPFR 4.0.

   • ‘mpfr_get_decimal128’ in MPFR 4.1.

   • ‘mpfr_get_float128’ in MPFR 4.0 if configured with
     ‘--enable-float128’.

   • ‘mpfr_get_flt’ in MPFR 3.0.

   • ‘mpfr_get_patches’ in MPFR 2.3.

   • ‘mpfr_get_q’ in MPFR 4.0.

   • ‘mpfr_get_str_ndigits’ in MPFR 4.1.

   • ‘mpfr_get_z_2exp’ in MPFR 3.0.  This function was named
     ‘mpfr_get_z_exp’ in previous versions; ‘mpfr_get_z_exp’ is still
     available via a macro in ‘mpfr.h’:
          #define mpfr_get_z_exp mpfr_get_z_2exp
     Thus code that needs to work with both MPFR 2.x and MPFR 3.x should
     use ‘mpfr_get_z_exp’.

   • ‘mpfr_grandom’ in MPFR 3.1.

   • ‘mpfr_j0’, ‘mpfr_j1’ and ‘mpfr_jn’ in MPFR 2.3.

   • ‘mpfr_log2p1’ and ‘mpfr_log10p1’ in MPFR 4.2.

   • ‘mpfr_lgamma’ in MPFR 2.3.

   • ‘mpfr_li2’ in MPFR 2.4.

   • ‘mpfr_log_ui’ in MPFR 4.0.

   • ‘mpfr_min_prec’ in MPFR 3.0.

   • ‘mpfr_modf’ in MPFR 2.4.

   • ‘mpfr_mp_memory_cleanup’ in MPFR 4.0.

   • ‘mpfr_mul_d’ in MPFR 2.4.

   • ‘mpfr_nrandom’ in MPFR 4.0.

   • ‘mpfr_powr’, ‘mpfr_pown’, ‘mpfr_pow_sj’ and ‘mpfr_pow_uj’ in
     MPFR 4.2.

   • ‘mpfr_printf’ in MPFR 2.4.

   • ‘mpfr_rec_sqrt’ in MPFR 2.4.

   • ‘mpfr_regular_p’ in MPFR 3.0.

   • ‘mpfr_remainder’ and ‘mpfr_remquo’ in MPFR 2.3.

   • ‘mpfr_rint_roundeven’ and ‘mpfr_roundeven’ in MPFR 4.0.

   • ‘mpfr_round_nearest_away’ in MPFR 4.0.

   • ‘mpfr_rootn_si’ in MPFR 4.2.

   • ‘mpfr_rootn_ui’ in MPFR 4.0.

   • ‘mpfr_set_decimal128’ in MPFR 4.1.

   • ‘mpfr_set_divby0’ in MPFR 3.1 (new divide-by-zero exception).

   • ‘mpfr_set_float128’ in MPFR 4.0 if configured with
     ‘--enable-float128’.

   • ‘mpfr_set_flt’ in MPFR 3.0.

   • ‘mpfr_set_z_2exp’ in MPFR 3.0.

   • ‘mpfr_set_zero’ in MPFR 3.0.

   • ‘mpfr_setsign’ in MPFR 2.3.

   • ‘mpfr_signbit’ in MPFR 2.3.

   • ‘mpfr_sinh_cosh’ in MPFR 2.4.

   • ‘mpfr_sinpi’ and ‘mpfr_sinu’ in MPFR 4.2.

   • ‘mpfr_snprintf’ and ‘mpfr_sprintf’ in MPFR 2.4.

   • ‘mpfr_sub_d’ in MPFR 2.4.

   • ‘mpfr_tanpi’ and ‘mpfr_tanu’ in MPFR 4.2.

   • ‘mpfr_total_order_p’ in MPFR 4.1.

   • ‘mpfr_urandom’ in MPFR 3.0.

   • ‘mpfr_vasprintf’, ‘mpfr_vfprintf’, ‘mpfr_vprintf’, ‘mpfr_vsprintf’
     and ‘mpfr_vsnprintf’ in MPFR 2.4.

   • ‘mpfr_y0’, ‘mpfr_y1’ and ‘mpfr_yn’ in MPFR 2.3.

   • ‘mpfr_z_sub’ in MPFR 3.1.


File: mpfr.info,  Node: Changed Functions,  Next: Removed Functions,  Prev: Added Functions,  Up: API Compatibility

6.3 Changed Functions
=====================

The following functions and function-like macros have changed after
MPFR 2.2.  Changes can affect the behavior of code written for some MPFR
version when built and run against another MPFR version (older or
newer), as described below.

   • The formatted output functions (‘mpfr_printf’, etc.)  have slightly
     changed in MPFR 4.1 in the case where the precision field is empty:
     trailing zeros were not output with the conversion specifier ‘e’ /
     ‘E’ (the chosen precision was not fully specified and it depended
     on the input value), and also on the value zero with the conversion
     specifiers ‘f’ / ‘F’ / ‘g’ / ‘G’ (this could partly be regarded as
     a bug); they are now kept in a way similar to the formatted output
     functions from C.  Moreover, the case where the precision consists
     only of a period has been fixed in MPFR 4.2 to be like ‘.0’ as
     specified in the ISO C standard (it previously behaved as a missing
     precision).

   • ‘mpfr_abs’, ‘mpfr_neg’ and ‘mpfr_set’ changed in MPFR 4.0.  In
     previous MPFR versions, the sign bit of a NaN was unspecified;
     however, in practice, it was set as now specified except for
     ‘mpfr_neg’ with a reused argument: ‘mpfr_neg(x,x,rnd)’.

   • ‘mpfr_check_range’ changed in MPFR 2.3.2 and MPFR 2.4.  If the
     value is an inexact infinity, the overflow flag is now set (in case
     it was lost), while it was previously left unchanged.  This is
     really what is expected in practice (and what the MPFR code was
     expecting), so that the previous behavior was regarded as a bug.
     Hence the change in MPFR 2.3.2.

   • ‘mpfr_eint’ changed in MPFR 4.0.  This function now returns the
     value of the E1/eint1 function for negative argument (before
     MPFR 4.0, it was returning NaN).

   • ‘mpfr_get_f’ changed in MPFR 3.0.  This function was returning
     zero, except for NaN and Inf, which do not exist in MPF.  The
     _erange_ flag is now set in these cases, and ‘mpfr_get_f’ now
     returns the usual ternary value.

   • ‘mpfr_get_si’, ‘mpfr_get_sj’, ‘mpfr_get_ui’ and ‘mpfr_get_uj’
     changed in MPFR 3.0.  In previous MPFR versions, the cases where
     the _erange_ flag is set were unspecified.

   • ‘mpfr_get_str’ changed in MPFR 4.0.  This function now sets the NaN
     flag on NaN input (to follow the usual MPFR rules on NaN and
     IEEE 754 recommendations on string conversions from
     Subclause 5.12.1) and sets the inexact flag when the conversion is
     inexact.

   • ‘mpfr_get_z’ changed in MPFR 3.0.  The return type was ‘void’; it
     is now ‘int’, and the usual ternary value is returned.  Thus
     programs that need to work with both MPFR 2.x and 3.x must not use
     the return value.  Even in this case, C code using ‘mpfr_get_z’ as
     the second or third term of a conditional operator may also be
     affected.  For instance, the following is correct with MPFR 3.0,
     but not with MPFR 2.x:
          bool ? mpfr_get_z(...) : mpfr_add(...);
     On the other hand, the following is correct with MPFR 2.x, but not
     with MPFR 3.0:
          bool ? mpfr_get_z(...) : (void) mpfr_add(...);
     Portable code should cast ‘mpfr_get_z(...)’ to ‘void’ to use the
     type ‘void’ for both terms of the conditional operator, as in:
          bool ? (void) mpfr_get_z(...) : (void) mpfr_add(...);
     Alternatively, ‘if ... else’ can be used instead of the conditional
     operator.

     Moreover the cases where the _erange_ flag is set were unspecified
     in MPFR 2.x.

   • ‘mpfr_get_z_exp’ changed in MPFR 3.0.  In previous MPFR versions,
     the cases where the _erange_ flag is set were unspecified.  Note:
     this function has been renamed to ‘mpfr_get_z_2exp’ in MPFR 3.0,
     but ‘mpfr_get_z_exp’ is still available for compatibility reasons.

   • ‘mpfr_out_str’ changed in MPFR 4.1.  The argument BASE can now be
     negative (from −2 to −36), in order to follow ‘mpfr_get_str’ and
     GMP’s ‘mpf_out_str’ functions.

   • ‘mpfr_set_exp’ changed in MPFR 4.0.  Before MPFR 4.0, the exponent
     was set whatever the contents of the MPFR object in argument.  In
     practice, this could be useful as a low-level function when the
     MPFR number was being constructed by setting the fields of its
     internal structure, but the API does not provide a way to do this
     except by using internals.  Thus, for the API, this behavior was
     useless and could quickly lead to undefined behavior due to the
     fact that the generated value could have an invalid format if the
     MPFR object contained a special value (NaN, infinity or zero).

   • ‘mpfr_strtofr’ changed in MPFR 2.3.1 and MPFR 2.4.  This was
     actually a bug fix since the code and the documentation did not
     match.  But both were changed in order to have a more consistent
     and useful behavior.  The main changes in the code are as follows.
     The binary exponent is now accepted even without the ‘0b’ or ‘0x’
     prefix.  Data corresponding to NaN can now have an optional sign
     (such data were previously invalid).

   • ‘mpfr_strtofr’ changed in MPFR 3.0.  This function now accepts
     bases from 37 to 62 (no changes for the other bases).  Note: if an
     unsupported base is provided to this function, the behavior is
     undefined; more precisely, in MPFR 2.3.1 and later, providing an
     unsupported base yields an assertion failure (this behavior may
     change in the future).

   • ‘mpfr_subnormalize’ changed in MPFR 3.1.  This was actually
     regarded as a bug fix.  The ‘mpfr_subnormalize’ implementation up
     to MPFR 3.0.0 did not change the flags.  In particular, it did not
     follow the generic rule concerning the inexact flag (and no special
     behavior was specified).  The case of the underflow flag was more a
     lack of specification.

   • ‘mpfr_sum’ changed in MPFR 4.0.  The ‘mpfr_sum’ function has
     completely been rewritten for MPFR 4.0, with an update of the
     specification: the sign of an exact zero result is now specified,
     and the return value is now the usual ternary value.  The old
     ‘mpfr_sum’ implementation could also take all the memory and crash
     on inputs of very different magnitude.

   • ‘mpfr_urandom’ and ‘mpfr_urandomb’ changed in MPFR 3.1.  Their
     behavior no longer depends on the platform (assuming this is also
     true for GMP’s random generator, which is not the case between GMP
     4.1 and 4.2 if ‘gmp_randinit_default’ is used).  As a consequence,
     the returned values can be different between MPFR 3.1 and previous
     MPFR versions.  Note: as the reproducibility of these functions was
     not specified before MPFR 3.1, the MPFR 3.1 behavior is _not_
     regarded as backward incompatible with previous versions.

   • ‘mpfr_urandom’ changed in MPFR 4.0.  The next random state no
     longer depends on the current exponent range and the rounding mode.
     The exceptions due to the rounding of the random number are now
     correctly generated, following the uniform distribution.  As a
     consequence, the returned values can be different between MPFR 4.0
     and previous MPFR versions.

   • Up to MPFR 4.1.0, some macros of the *note Custom Interface:: had
     undocumented limitations.  In particular, their arguments may be
     evaluated multiple times or none.


File: mpfr.info,  Node: Removed Functions,  Next: Other Changes,  Prev: Changed Functions,  Up: API Compatibility

6.4 Removed Functions
=====================

Functions ‘mpfr_random’ and ‘mpfr_random2’ have been removed in MPFR 3.0
(this only affects old code built against MPFR 3.0 or later).  (The
function ‘mpfr_random’ had been deprecated since at least MPFR 2.2.0,
and ‘mpfr_random2’ since MPFR 2.4.0.)

   Macros ‘mpfr_add_one_ulp’ and ‘mpfr_sub_one_ulp’ have been removed in
MPFR 4.0.  They were no longer documented since MPFR 2.1.0 and were
announced as deprecated since MPFR 3.1.0.

   Function ‘mpfr_grandom’ is marked as deprecated in MPFR 4.0.  It will
be removed in a future release.


File: mpfr.info,  Node: Other Changes,  Prev: Removed Functions,  Up: API Compatibility

6.5 Other Changes
=================

For users of a C++ compiler, the way how the availability of ‘intmax_t’
is detected has changed in MPFR 3.0.  In MPFR 2.x, if a macro ‘INTMAX_C’
or ‘UINTMAX_C’ was defined (e.g.  when the ‘__STDC_CONSTANT_MACROS’
macro had been defined before ‘<stdint.h>’ or ‘<inttypes.h>’ has been
included), ‘intmax_t’ was assumed to be defined.  However, this was not
always the case (more precisely, ‘intmax_t’ can be defined only in the
namespace ‘std’, as with Boost), so that compilations could fail.  Thus
the check for ‘INTMAX_C’ or ‘UINTMAX_C’ is now disabled for C++
compilers, with the following consequences:

   • Programs written for MPFR 2.x that need ‘intmax_t’ may no longer be
     compiled against MPFR 3.0: a ‘#define MPFR_USE_INTMAX_T’ may be
     necessary before ‘mpfr.h’ is included.

   • The compilation of programs that work with MPFR 3.0 may fail with
     MPFR 2.x due to the problem described above.  Workarounds are
     possible, such as defining ‘intmax_t’ and ‘uintmax_t’ in the global
     namespace, though this is not clean.

   The divide-by-zero exception is new in MPFR 3.1.  However, it should
not introduce incompatible changes for programs that strictly follow the
MPFR API since the exception can only be seen via new functions.

   As of MPFR 3.1, the ‘mpfr.h’ header can be included several times,
while still supporting optional functions (*note Headers and
Libraries::).

   The way memory is allocated by MPFR should be regarded as
well-specified only as of MPFR 4.0.


File: mpfr.info,  Node: MPFR and the IEEE 754 Standard,  Next: Contributors,  Prev: API Compatibility,  Up: Top

7 MPFR and the IEEE 754 Standard
********************************

This section describes differences between MPFR and the IEEE 754
standard, and behaviors that are not specified yet in IEEE 754.

   The MPFR numbers do not include subnormals.  The reason is that
subnormals are less useful than in IEEE 754 as the default exponent
range in MPFR is large and they would have made the implementation more
complex.  However, subnormals can be emulated using ‘mpfr_subnormalize’.

   MPFR has a single NaN.  The behavior is similar either to a signaling
NaN or to a quiet NaN, depending on the context.  For any function
returning a NaN (either produced or propagated), the NaN flag is set,
while in IEEE 754, some operations are quiet (even on a signaling NaN).

   The ‘mpfr_rec_sqrt’ function differs from IEEE 754 on −0, where it
gives +Inf (like for +0), following the usual limit rules, instead of
−Inf.

   The ‘mpfr_root’ function predates IEEE 754-2008, where rootn was
introduced, and behaves differently from the IEEE 754 rootn operation.
It is deprecated and ‘mpfr_rootn_ui’ should be used instead.

   Operations with an unsigned zero: For functions taking an argument of
integer or rational type, a zero of such a type is unsigned unlike the
floating-point zero (this includes the zero of type ‘unsigned long’,
which is a mathematical, exact zero, as opposed to a floating-point
zero, which may come from an underflow and whose sign would correspond
to the sign of the real non-zero value).  Unless documented otherwise,
this zero is regarded as +0, as if it were first converted to a MPFR
number with ‘mpfr_set_ui’ or ‘mpfr_set_si’ (thus the result may not
agree with the usual limit rules applied to a mathematical zero).  This
is not the case of addition and subtraction (‘mpfr_add_ui’, etc.), but
for these functions, only the sign of a zero result would be affected,
with +0 and −0 considered equal.  Such operations are currently out of
the scope of the IEEE 754 standard, and at the time of specification in
MPFR, the Floating-Point Working Group in charge of the revision of
IEEE 754 did not want to discuss issues with non-floating-point types in
general.

   Note also that some obvious differences may come from the fact that
in MPFR, each variable has its own precision.  For instance, a
subtraction of two numbers of the same sign may yield an overflow; idem
for a call to ‘mpfr_set’, ‘mpfr_neg’ or ‘mpfr_abs’, if the destination
variable has a smaller precision.


File: mpfr.info,  Node: Contributors,  Next: References,  Prev: MPFR and the IEEE 754 Standard,  Up: Top

Contributors
************

The main developers of MPFR are Guillaume Hanrot, Vincent Lefèvre,
Patrick Pélissier, Philippe Théveny and Paul Zimmermann.

   Sylvie Boldo from ENS-Lyon, France, contributed the functions
‘mpfr_agm’ and ‘mpfr_log’.  Sylvain Chevillard contributed the ‘mpfr_ai’
function.  David Daney contributed the hyperbolic and inverse hyperbolic
functions, the base-2 exponential, and the factorial function.  Alain
Delplanque contributed the new version of the ‘mpfr_get_str’ function.
Mathieu Dutour contributed the functions ‘mpfr_acos’, ‘mpfr_asin’ and
‘mpfr_atan’, and a previous version of ‘mpfr_gamma’.  Laurent Fousse
contributed the original version of the ‘mpfr_sum’ function (used up to
MPFR 3.1).  Emmanuel Jeandel, from ENS-Lyon too, contributed the generic
hypergeometric code, as well as the internal function ‘mpfr_exp3’, a
first implementation of the sine and cosine, and improved versions of
‘mpfr_const_log2’ and ‘mpfr_const_pi’.  Ludovic Meunier helped in the
design of the ‘mpfr_erf’ code.  Jean-Luc Rémy contributed the
‘mpfr_zeta’ code.  Fabrice Rouillier contributed the ‘mpfr_xxx_z’ and
‘mpfr_xxx_q’ functions, and helped to the Microsoft Windows porting.
Damien Stehlé contributed the ‘mpfr_get_ld_2exp’ function.  Charles
Karney contributed the ‘mpfr_nrandom’ and ‘mpfr_erandom’ functions.

   We would like to thank Jean-Michel Muller and Joris van der Hoeven
for very fruitful discussions at the beginning of that project, Torbjörn
Granlund and Kevin Ryde for their help about design issues, and Nathalie
Revol for her careful reading of a previous version of this
documentation.  In particular Kevin Ryde did a tremendous job for the
portability of MPFR in 2002-2004.

   The development of the MPFR library would not have been possible
without the continuous support of INRIA, and of the LORIA (Nancy,
France) and LIP (Lyon, France) laboratories.  In particular the main
authors were or are members of the PolKA, Spaces, Cacao, Caramel and
Caramba project-teams at LORIA and of the Arénaire and AriC
project-teams at LIP.  This project was started during the Fiable
(reliable in French) action supported by INRIA, and continued during the
AOC action.  The development of MPFR was also supported by a grant
(202F0659 00 MPN 121) from the Conseil Régional de Lorraine in 2002,
from INRIA by an "associate engineer" grant (2003-2005), an "opération
de développement logiciel" grant (2007-2009), and the post-doctoral
grant of Sylvain Chevillard in 2009-2010.  The MPFR-MPC workshop in June
2012 was partly supported by the ERC grant ANTICS of Andreas Enge.  The
MPFR-MPC workshop in January 2013 was partly supported by the ERC grant
ANTICS, the GDR IM and the Caramel project-team, during which Mickaël
Gastineau contributed the MPFRbench program, Fredrik Johansson a faster
version of ‘mpfr_const_euler’, and Jianyang Pan a formally proven
version of the ‘mpfr_add1sp1’ internal routine.


File: mpfr.info,  Node: References,  Next: GNU Free Documentation License,  Prev: Contributors,  Up: Top

References
**********

   • Richard Brent and Paul Zimmermann, "Modern Computer Arithmetic",
     Cambridge University Press, Cambridge Monographs on Applied and
     Computational Mathematics, Number 18, 2010.  Electronic version
     freely available at
     <https://members.loria.fr/PZimmermann/mca/pub226.html>.

   • Laurent Fousse, Guillaume Hanrot, Vincent Lefèvre, Patrick
     Pélissier and Paul Zimmermann, "MPFR: A Multiple-Precision Binary
     Floating-Point Library With Correct Rounding", ACM Transactions on
     Mathematical Software, volume 33, issue 2, article 13, 15 pages,
     2007, <https://doi.org/10.1145/1236463.1236468>.

   • Torbjörn Granlund, "GNU MP: The GNU Multiple Precision Arithmetic
     Library", version 6.1.2, 2016, <https://gmplib.org/>.

   • IEEE standard for binary floating-point arithmetic, Technical
     Report ANSI-IEEE Standard 754-1985, New York, 1985.  Approved March
     21, 1985: IEEE Standards Board; approved July 26, 1985: American
     National Standards Institute, 18 pages.

   • IEEE Standard for Floating-Point Arithmetic, IEEE Standard
     754-2008, 2008.  Revision of IEEE Standard 754-1985, approved June
     12, 2008: IEEE-SA Standards Board, 70 pages.

   • IEEE Standard for Floating-Point Arithmetic, IEEE Standard
     754-2019, 2019.  Revision of IEEE Standard 754-2008, approved June
     13, 2019: IEEE-SA Standards Board, 84 pages.

   • Donald E. Knuth, "The Art of Computer Programming", vol 2,
     "Seminumerical Algorithms", 2nd edition, Addison-Wesley, 1981.

   • Jean-Michel Muller, "Elementary Functions, Algorithms and
     Implementation", Birkhäuser, Boston, 3rd edition, 2016.

   • Jean-Michel Muller, Nicolas Brisebarre, Florent de Dinechin,
     Claude-Pierre Jeannerod, Vincent Lefèvre, Guillaume Melquiond,
     Nathalie Revol, Damien Stehlé and Serge Torrès, "Handbook of
     Floating-Point Arithmetic", Birkhäuser, Boston, 2009.


File: mpfr.info,  Node: GNU Free Documentation License,  Next: Concept Index,  Prev: References,  Up: Top

Appendix A GNU Free Documentation License
*****************************************

                      Version 1.2, November 2002

     Copyright © 2000,2001,2002 Free Software Foundation, Inc.
     51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document “free” in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of “copyleft”, which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.  We
     recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it can
     be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     “Document”, below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as “you”.  You accept
     the license if you copy, modify or distribute the work in a way
     requiring permission under copyright law.

     A “Modified Version” of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A “Secondary Section” is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document’s overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The “Invariant Sections” are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in the
     notice that says that the Document is released under this License.
     If a section does not fit the above definition of Secondary then it
     is not allowed to be designated as Invariant.  The Document may
     contain zero Invariant Sections.  If the Document does not identify
     any Invariant Sections then there are none.

     The “Cover Texts” are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A “Transparent” copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed
     of pixels) generic paint programs or (for drawings) some widely
     available drawing editor, and that is suitable for input to text
     formatters or for automatic translation to a variety of formats
     suitable for input to text formatters.  A copy made in an otherwise
     Transparent file format whose markup, or absence of markup, has
     been arranged to thwart or discourage subsequent modification by
     readers is not Transparent.  An image format is not Transparent if
     used for any substantial amount of text.  A copy that is not
     “Transparent” is called “Opaque”.

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and standard-conforming
     simple HTML, PostScript or PDF designed for human modification.
     Examples of transparent image formats include PNG, XCF and JPG.
     Opaque formats include proprietary formats that can be read and
     edited only by proprietary word processors, SGML or XML for which
     the DTD and/or processing tools are not generally available, and
     the machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The “Title Page” means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, “Title
     Page” means the text near the most prominent appearance of the
     work’s title, preceding the beginning of the body of the text.

     A section “Entitled XYZ” means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.)
     To “Preserve the Title” of such a section when you modify the
     Document means that it remains a section “Entitled XYZ” according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow the
     conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document’s license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the title
     equally prominent and visible.  You may add other material on the
     covers in addition.  Copying with changes limited to the covers, as
     long as they preserve the title of the Document and satisfy these
     conditions, can be treated as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a machine-readable
     Transparent copy along with each Opaque copy, or state in or with
     each Opaque copy a computer-network location from which the general
     network-using public has access to download using public-standard
     network protocols a complete Transparent copy of the Document, free
     of added material.  If you use the latter option, you must take
     reasonably prudent steps, when you begin distribution of Opaque
     copies in quantity, to ensure that this Transparent copy will
     remain thus accessible at the stated location until at least one
     year after the last time you distribute an Opaque copy (directly or
     through your agents or retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of copies,
     to give them a chance to provide you with an updated version of the
     Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with the
     Modified Version filling the role of the Document, thus licensing
     distribution and modification of the Modified Version to whoever
     possesses a copy of it.  In addition, you must do these things in
     the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of previous
          versions (which should, if there were any, be listed in the
          History section of the Document).  You may use the same title
          as a previous version if the original publisher of that
          version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document’s
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled “History”, Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on the
          Title Page.  If there is no section Entitled “History” in the
          Document, create one stating the title, year, authors, and
          publisher of the Document as given on its Title Page, then add
          an item describing the Modified Version as stated in the
          previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in the
          “History” section.  You may omit a network location for a work
          that was published at least four years before the Document
          itself, or if the original publisher of the version it refers
          to gives permission.

       K. For any section Entitled “Acknowledgements” or “Dedications”,
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered
          in their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled “Endorsements”.  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          “Endorsements” or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option designate
     some or all of these sections as invariant.  To do this, add their
     titles to the list of Invariant Sections in the Modified Version’s
     license notice.  These titles must be distinct from any other
     section titles.

     You may add a section Entitled “Endorsements”, provided it contains
     nothing but endorsements of your Modified Version by various
     parties—for example, statements of peer review or that the text has
     been approved by an organization as the authoritative definition of
     a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end of
     the list of Cover Texts in the Modified Version.  Only one passage
     of Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document
     already includes a cover text for the same cover, previously added
     by you or by arrangement made by the same entity you are acting on
     behalf of, you may not add another; but you may replace the old
     one, on explicit permission from the previous publisher that added
     the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination all
     of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     “History” in the various original documents, forming one section
     Entitled “History”; likewise combine any sections Entitled
     “Acknowledgements”, and any sections Entitled “Dedications”.  You
     must delete all sections Entitled “Endorsements.”

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the documents
     in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of a
     storage or distribution medium, is called an “aggregate” if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation’s users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document’s Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled “Acknowledgements”,
     “Dedications”, or “History”, the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses terminated
     so long as such parties remain in full compliance.

  10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     <https://www.gnu.org/copyleft/>.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License “or any later version” applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If the
     Document does not specify a version number of this License, you may
     choose any version ever published (not as a draft) by the Free
     Software Foundation.

A.1 ADDENDUM: How to Use This License For Your Documents
========================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the “with...Texts.” line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.


File: mpfr.info,  Node: Concept Index,  Next: Function and Type Index,  Prev: GNU Free Documentation License,  Up: Top

Concept Index
*************

[index]
* Menu:

* Accuracy:                              MPFR Interface.       (line 25)
* Arithmetic functions:                  Arithmetic Functions. (line  3)
* Assignment functions:                  Assignment Functions. (line  3)
* Combined initialization and assignment functions: Combined Initialization and Assignment Functions.
                                                               (line  3)
* Comparison functions:                  Comparison Functions. (line  3)
* Compatibility with MPF:                Compatibility with MPF.
                                                               (line  3)
* Conditions for copying MPFR:           Copying.              (line  6)
* Conversion functions:                  Conversion Functions. (line  3)
* Copying conditions:                    Copying.              (line  6)
* Custom interface:                      Custom Interface.     (line  3)
* Exception related functions:           Exception Related Functions.
                                                               (line  3)
* Exponent:                              Nomenclature and Types.
                                                               (line 47)
* Floating-point functions:              MPFR Interface.       (line  6)
* Floating-point number:                 Nomenclature and Types.
                                                               (line  6)
* GNU Free Documentation License:        GNU Free Documentation License.
                                                               (line  6)
* GNU Free Documentation License <1>:    GNU Free Documentation License.
                                                               (line  6)
* Group of flags:                        Nomenclature and Types.
                                                               (line 58)
* I/O functions:                         Input and Output Functions.
                                                               (line  3)
* I/O functions <1>:                     Formatted Output Functions.
                                                               (line  3)
* Initialization functions:              Initialization Functions.
                                                               (line  3)
* Input functions:                       Input and Output Functions.
                                                               (line  3)
* Installation:                          Installing MPFR.      (line  6)
* Integer related functions:             Integer and Remainder Related Functions.
                                                               (line  3)
* Internals:                             Internals.            (line  3)
* intmax_t:                              Headers and Libraries.
                                                               (line 22)
* inttypes.h:                            Headers and Libraries.
                                                               (line 22)
* libmpfr:                               Headers and Libraries.
                                                               (line 50)
* Libraries:                             Headers and Libraries.
                                                               (line 50)
* Libtool:                               Headers and Libraries.
                                                               (line 56)
* Limb:                                  Internals.            (line  6)
* Linking:                               Headers and Libraries.
                                                               (line 50)
* Memory handling functions:             Memory Handling Functions.
                                                               (line  3)
* Miscellaneous float functions:         Miscellaneous Functions.
                                                               (line  3)
* mpfr.h:                                Headers and Libraries.
                                                               (line  6)
* Output functions:                      Input and Output Functions.
                                                               (line  3)
* Output functions <1>:                  Formatted Output Functions.
                                                               (line  3)
* Precision:                             Nomenclature and Types.
                                                               (line 33)
* Precision <1>:                         MPFR Interface.       (line 17)
* Regular number:                        Nomenclature and Types.
                                                               (line  6)
* Remainder related functions:           Integer and Remainder Related Functions.
                                                               (line  3)
* Reporting bugs:                        Reporting Bugs.       (line  6)
* Rounding:                              Nomenclature and Types.
                                                               (line 53)
* Rounding mode related functions:       Rounding-Related Functions.
                                                               (line  3)
* stdarg.h:                              Headers and Libraries.
                                                               (line 19)
* stdint.h:                              Headers and Libraries.
                                                               (line 22)
* stdio.h:                               Headers and Libraries.
                                                               (line 12)
* Ternary value:                         Rounding.             (line 75)
* Transcendental functions:              Transcendental Functions.
                                                               (line  3)
* uintmax_t:                             Headers and Libraries.
                                                               (line 22)


File: mpfr.info,  Node: Function and Type Index,  Prev: Concept Index,  Up: Top

Function and Type Index
***********************

[index]
* Menu:

* mpfr_abs:                              Arithmetic Functions.
                                                              (line 145)
* mpfr_acos:                             Transcendental Functions.
                                                              (line 168)
* mpfr_acosh:                            Transcendental Functions.
                                                              (line 258)
* mpfr_acospi:                           Transcendental Functions.
                                                              (line 190)
* mpfr_acosu:                            Transcendental Functions.
                                                              (line 180)
* mpfr_add:                              Arithmetic Functions.
                                                              (line   6)
* mpfr_add_d:                            Arithmetic Functions.
                                                              (line  12)
* mpfr_add_q:                            Arithmetic Functions.
                                                              (line  16)
* mpfr_add_si:                           Arithmetic Functions.
                                                              (line  10)
* mpfr_add_ui:                           Arithmetic Functions.
                                                              (line   8)
* mpfr_add_z:                            Arithmetic Functions.
                                                              (line  14)
* mpfr_agm:                              Transcendental Functions.
                                                              (line 355)
* mpfr_ai:                               Transcendental Functions.
                                                              (line 366)
* mpfr_asin:                             Transcendental Functions.
                                                              (line 169)
* mpfr_asinh:                            Transcendental Functions.
                                                              (line 259)
* mpfr_asinpi:                           Transcendental Functions.
                                                              (line 191)
* mpfr_asinu:                            Transcendental Functions.
                                                              (line 182)
* mpfr_asprintf:                         Formatted Output Functions.
                                                              (line 215)
* mpfr_atan:                             Transcendental Functions.
                                                              (line 170)
* mpfr_atan2:                            Transcendental Functions.
                                                              (line 196)
* mpfr_atan2pi:                          Transcendental Functions.
                                                              (line 200)
* mpfr_atan2u:                           Transcendental Functions.
                                                              (line 198)
* mpfr_atanh:                            Transcendental Functions.
                                                              (line 260)
* mpfr_atanpi:                           Transcendental Functions.
                                                              (line 192)
* mpfr_atanu:                            Transcendental Functions.
                                                              (line 184)
* mpfr_beta:                             Transcendental Functions.
                                                              (line 317)
* mpfr_buildopt_decimal_p:               Miscellaneous Functions.
                                                              (line 195)
* mpfr_buildopt_float128_p:              Miscellaneous Functions.
                                                              (line 190)
* mpfr_buildopt_gmpinternals_p:          Miscellaneous Functions.
                                                              (line 200)
* mpfr_buildopt_sharedcache_p:           Miscellaneous Functions.
                                                              (line 205)
* mpfr_buildopt_tls_p:                   Miscellaneous Functions.
                                                              (line 184)
* mpfr_buildopt_tune_case:               Miscellaneous Functions.
                                                              (line 213)
* mpfr_can_round:                        Rounding-Related Functions.
                                                              (line  40)
* mpfr_cbrt:                             Arithmetic Functions.
                                                              (line 118)
* mpfr_ceil:                             Integer and Remainder Related Functions.
                                                              (line   7)
* mpfr_check_range:                      Exception Related Functions.
                                                              (line  50)
* mpfr_clear:                            Initialization Functions.
                                                              (line  33)
* mpfr_clears:                           Initialization Functions.
                                                              (line  38)
* mpfr_clear_divby0:                     Exception Related Functions.
                                                              (line 154)
* mpfr_clear_erangeflag:                 Exception Related Functions.
                                                              (line 157)
* mpfr_clear_flags:                      Exception Related Functions.
                                                              (line 161)
* mpfr_clear_inexflag:                   Exception Related Functions.
                                                              (line 156)
* mpfr_clear_nanflag:                    Exception Related Functions.
                                                              (line 155)
* mpfr_clear_overflow:                   Exception Related Functions.
                                                              (line 153)
* mpfr_clear_underflow:                  Exception Related Functions.
                                                              (line 152)
* mpfr_cmp:                              Comparison Functions.
                                                              (line   6)
* mpfr_cmpabs:                           Comparison Functions.
                                                              (line  34)
* mpfr_cmpabs_ui:                        Comparison Functions.
                                                              (line  35)
* mpfr_cmp_d:                            Comparison Functions.
                                                              (line   9)
* mpfr_cmp_f:                            Comparison Functions.
                                                              (line  13)
* mpfr_cmp_ld:                           Comparison Functions.
                                                              (line  10)
* mpfr_cmp_q:                            Comparison Functions.
                                                              (line  12)
* mpfr_cmp_si:                           Comparison Functions.
                                                              (line   8)
* mpfr_cmp_si_2exp:                      Comparison Functions.
                                                              (line  29)
* mpfr_cmp_ui:                           Comparison Functions.
                                                              (line   7)
* mpfr_cmp_ui_2exp:                      Comparison Functions.
                                                              (line  27)
* mpfr_cmp_z:                            Comparison Functions.
                                                              (line  11)
* mpfr_compound_si:                      Transcendental Functions.
                                                              (line 112)
* mpfr_const_catalan:                    Transcendental Functions.
                                                              (line 377)
* mpfr_const_euler:                      Transcendental Functions.
                                                              (line 376)
* mpfr_const_log2:                       Transcendental Functions.
                                                              (line 374)
* mpfr_const_pi:                         Transcendental Functions.
                                                              (line 375)
* mpfr_copysign:                         Miscellaneous Functions.
                                                              (line 137)
* mpfr_cos:                              Transcendental Functions.
                                                              (line 123)
* mpfr_cosh:                             Transcendental Functions.
                                                              (line 238)
* mpfr_cospi:                            Transcendental Functions.
                                                              (line 145)
* mpfr_cosu:                             Transcendental Functions.
                                                              (line 129)
* mpfr_cot:                              Transcendental Functions.
                                                              (line 164)
* mpfr_coth:                             Transcendental Functions.
                                                              (line 254)
* mpfr_csc:                              Transcendental Functions.
                                                              (line 163)
* mpfr_csch:                             Transcendental Functions.
                                                              (line 253)
* mpfr_custom_get_exp:                   Custom Interface.    (line  79)
* mpfr_custom_get_kind:                  Custom Interface.    (line  69)
* mpfr_custom_get_significand:           Custom Interface.    (line  74)
* mpfr_custom_get_size:                  Custom Interface.    (line  40)
* mpfr_custom_init:                      Custom Interface.    (line  44)
* mpfr_custom_init_set:                  Custom Interface.    (line  51)
* mpfr_custom_move:                      Custom Interface.    (line  88)
* MPFR_DECL_INIT:                        Initialization Functions.
                                                              (line  77)
* mpfr_digamma:                          Transcendental Functions.
                                                              (line 312)
* mpfr_dim:                              Arithmetic Functions.
                                                              (line 156)
* mpfr_div:                              Arithmetic Functions.
                                                              (line  75)
* mpfr_divby0_p:                         Exception Related Functions.
                                                              (line 177)
* mpfr_div_2exp:                         Compatibility with MPF.
                                                              (line  56)
* mpfr_div_2si:                          Arithmetic Functions.
                                                              (line 171)
* mpfr_div_2ui:                          Arithmetic Functions.
                                                              (line 169)
* mpfr_div_d:                            Arithmetic Functions.
                                                              (line  87)
* mpfr_div_q:                            Arithmetic Functions.
                                                              (line  91)
* mpfr_div_si:                           Arithmetic Functions.
                                                              (line  83)
* mpfr_div_ui:                           Arithmetic Functions.
                                                              (line  79)
* mpfr_div_z:                            Arithmetic Functions.
                                                              (line  89)
* mpfr_dot:                              Arithmetic Functions.
                                                              (line 227)
* mpfr_dump:                             Input and Output Functions.
                                                              (line  79)
* mpfr_d_div:                            Arithmetic Functions.
                                                              (line  85)
* mpfr_d_sub:                            Arithmetic Functions.
                                                              (line  36)
* mpfr_eint:                             Transcendental Functions.
                                                              (line 264)
* mpfr_eq:                               Compatibility with MPF.
                                                              (line  35)
* mpfr_equal_p:                          Comparison Functions.
                                                              (line  60)
* mpfr_erandom:                          Miscellaneous Functions.
                                                              (line 109)
* mpfr_erangeflag_p:                     Exception Related Functions.
                                                              (line 180)
* mpfr_erf:                              Transcendental Functions.
                                                              (line 329)
* mpfr_erfc:                             Transcendental Functions.
                                                              (line 330)
* mpfr_exp:                              Transcendental Functions.
                                                              (line  44)
* mpfr_exp10:                            Transcendental Functions.
                                                              (line  46)
* mpfr_exp10m1:                          Transcendental Functions.
                                                              (line  52)
* mpfr_exp2:                             Transcendental Functions.
                                                              (line  45)
* mpfr_exp2m1:                           Transcendental Functions.
                                                              (line  51)
* mpfr_expm1:                            Transcendental Functions.
                                                              (line  50)
* mpfr_exp_t:                            Nomenclature and Types.
                                                              (line  47)
* mpfr_fac_ui:                           Arithmetic Functions.
                                                              (line 177)
* mpfr_fits_intmax_p:                    Conversion Functions.
                                                              (line 186)
* mpfr_fits_sint_p:                      Conversion Functions.
                                                              (line 182)
* mpfr_fits_slong_p:                     Conversion Functions.
                                                              (line 180)
* mpfr_fits_sshort_p:                    Conversion Functions.
                                                              (line 184)
* mpfr_fits_uintmax_p:                   Conversion Functions.
                                                              (line 185)
* mpfr_fits_uint_p:                      Conversion Functions.
                                                              (line 181)
* mpfr_fits_ulong_p:                     Conversion Functions.
                                                              (line 179)
* mpfr_fits_ushort_p:                    Conversion Functions.
                                                              (line 183)
* mpfr_flags_clear:                      Exception Related Functions.
                                                              (line 191)
* mpfr_flags_restore:                    Exception Related Functions.
                                                              (line 215)
* mpfr_flags_save:                       Exception Related Functions.
                                                              (line 211)
* mpfr_flags_set:                        Exception Related Functions.
                                                              (line 194)
* mpfr_flags_t:                          Nomenclature and Types.
                                                              (line  58)
* mpfr_flags_test:                       Exception Related Functions.
                                                              (line 197)
* mpfr_floor:                            Integer and Remainder Related Functions.
                                                              (line   8)
* mpfr_fma:                              Arithmetic Functions.
                                                              (line 181)
* mpfr_fmma:                             Arithmetic Functions.
                                                              (line 191)
* mpfr_fmms:                             Arithmetic Functions.
                                                              (line 193)
* mpfr_fmod:                             Integer and Remainder Related Functions.
                                                              (line 107)
* mpfr_fmodquo:                          Integer and Remainder Related Functions.
                                                              (line 111)
* mpfr_fmod_ui:                          Integer and Remainder Related Functions.
                                                              (line 109)
* mpfr_fms:                              Arithmetic Functions.
                                                              (line 183)
* mpfr_fpif_export:                      Input and Output Functions.
                                                              (line  54)
* mpfr_fpif_import:                      Input and Output Functions.
                                                              (line  65)
* mpfr_fprintf:                          Formatted Output Functions.
                                                              (line 179)
* mpfr_frac:                             Integer and Remainder Related Functions.
                                                              (line  90)
* mpfr_free_cache:                       Memory Handling Functions.
                                                              (line   9)
* mpfr_free_cache2:                      Memory Handling Functions.
                                                              (line  16)
* mpfr_free_pool:                        Memory Handling Functions.
                                                              (line  30)
* mpfr_free_str:                         Conversion Functions.
                                                              (line 174)
* mpfr_frexp:                            Conversion Functions.
                                                              (line  53)
* mpfr_gamma:                            Transcendental Functions.
                                                              (line 280)
* mpfr_gamma_inc:                        Transcendental Functions.
                                                              (line 281)
* mpfr_get_d:                            Conversion Functions.
                                                              (line   7)
* mpfr_get_decimal128:                   Conversion Functions.
                                                              (line  11)
* mpfr_get_decimal64:                    Conversion Functions.
                                                              (line  10)
* mpfr_get_default_prec:                 Initialization Functions.
                                                              (line 115)
* mpfr_get_default_rounding_mode:        Rounding-Related Functions.
                                                              (line  10)
* mpfr_get_d_2exp:                       Conversion Functions.
                                                              (line  40)
* mpfr_get_emax:                         Exception Related Functions.
                                                              (line   7)
* mpfr_get_emax_max:                     Exception Related Functions.
                                                              (line  43)
* mpfr_get_emax_min:                     Exception Related Functions.
                                                              (line  42)
* mpfr_get_emin:                         Exception Related Functions.
                                                              (line   6)
* mpfr_get_emin_max:                     Exception Related Functions.
                                                              (line  41)
* mpfr_get_emin_min:                     Exception Related Functions.
                                                              (line  40)
* mpfr_get_exp:                          Miscellaneous Functions.
                                                              (line 115)
* mpfr_get_f:                            Conversion Functions.
                                                              (line  89)
* mpfr_get_float128:                     Conversion Functions.
                                                              (line   9)
* mpfr_get_flt:                          Conversion Functions.
                                                              (line   6)
* mpfr_get_ld:                           Conversion Functions.
                                                              (line   8)
* mpfr_get_ld_2exp:                      Conversion Functions.
                                                              (line  42)
* mpfr_get_patches:                      Miscellaneous Functions.
                                                              (line 175)
* mpfr_get_prec:                         Initialization Functions.
                                                              (line 152)
* mpfr_get_q:                            Conversion Functions.
                                                              (line  84)
* mpfr_get_si:                           Conversion Functions.
                                                              (line  25)
* mpfr_get_sj:                           Conversion Functions.
                                                              (line  27)
* mpfr_get_str:                          Conversion Functions.
                                                              (line 114)
* mpfr_get_str_ndigits:                  Conversion Functions.
                                                              (line 102)
* mpfr_get_ui:                           Conversion Functions.
                                                              (line  26)
* mpfr_get_uj:                           Conversion Functions.
                                                              (line  28)
* mpfr_get_version:                      Miscellaneous Functions.
                                                              (line 144)
* mpfr_get_z:                            Conversion Functions.
                                                              (line  75)
* mpfr_get_z_2exp:                       Conversion Functions.
                                                              (line  62)
* mpfr_grandom:                          Miscellaneous Functions.
                                                              (line  79)
* mpfr_greaterequal_p:                   Comparison Functions.
                                                              (line  57)
* mpfr_greater_p:                        Comparison Functions.
                                                              (line  56)
* mpfr_hypot:                            Arithmetic Functions.
                                                              (line 201)
* mpfr_inexflag_p:                       Exception Related Functions.
                                                              (line 179)
* mpfr_inf_p:                            Comparison Functions.
                                                              (line  41)
* mpfr_init:                             Initialization Functions.
                                                              (line  56)
* mpfr_init2:                            Initialization Functions.
                                                              (line  10)
* mpfr_inits:                            Initialization Functions.
                                                              (line  65)
* mpfr_inits2:                           Initialization Functions.
                                                              (line  25)
* mpfr_init_set:                         Combined Initialization and Assignment Functions.
                                                              (line   6)
* mpfr_init_set_d:                       Combined Initialization and Assignment Functions.
                                                              (line  11)
* mpfr_init_set_f:                       Combined Initialization and Assignment Functions.
                                                              (line  16)
* mpfr_init_set_ld:                      Combined Initialization and Assignment Functions.
                                                              (line  12)
* mpfr_init_set_q:                       Combined Initialization and Assignment Functions.
                                                              (line  15)
* mpfr_init_set_si:                      Combined Initialization and Assignment Functions.
                                                              (line   9)
* mpfr_init_set_str:                     Combined Initialization and Assignment Functions.
                                                              (line  21)
* mpfr_init_set_ui:                      Combined Initialization and Assignment Functions.
                                                              (line   7)
* mpfr_init_set_z:                       Combined Initialization and Assignment Functions.
                                                              (line  14)
* mpfr_inp_str:                          Input and Output Functions.
                                                              (line  39)
* mpfr_integer_p:                        Integer and Remainder Related Functions.
                                                              (line 139)
* mpfr_j0:                               Transcendental Functions.
                                                              (line 334)
* mpfr_j1:                               Transcendental Functions.
                                                              (line 335)
* mpfr_jn:                               Transcendental Functions.
                                                              (line 336)
* mpfr_lessequal_p:                      Comparison Functions.
                                                              (line  59)
* mpfr_lessgreater_p:                    Comparison Functions.
                                                              (line  65)
* mpfr_less_p:                           Comparison Functions.
                                                              (line  58)
* mpfr_lgamma:                           Transcendental Functions.
                                                              (line 302)
* mpfr_li2:                              Transcendental Functions.
                                                              (line 275)
* mpfr_lngamma:                          Transcendental Functions.
                                                              (line 294)
* mpfr_log:                              Transcendental Functions.
                                                              (line  26)
* mpfr_log10:                            Transcendental Functions.
                                                              (line  30)
* mpfr_log10p1:                          Transcendental Functions.
                                                              (line  39)
* mpfr_log1p:                            Transcendental Functions.
                                                              (line  37)
* mpfr_log2:                             Transcendental Functions.
                                                              (line  29)
* mpfr_log2p1:                           Transcendental Functions.
                                                              (line  38)
* mpfr_log_ui:                           Transcendental Functions.
                                                              (line  27)
* mpfr_max:                              Miscellaneous Functions.
                                                              (line  26)
* mpfr_min:                              Miscellaneous Functions.
                                                              (line  24)
* mpfr_min_prec:                         Rounding-Related Functions.
                                                              (line  86)
* mpfr_modf:                             Integer and Remainder Related Functions.
                                                              (line  97)
* mpfr_mp_memory_cleanup:                Memory Handling Functions.
                                                              (line  35)
* mpfr_mul:                              Arithmetic Functions.
                                                              (line  53)
* mpfr_mul_2exp:                         Compatibility with MPF.
                                                              (line  54)
* mpfr_mul_2si:                          Arithmetic Functions.
                                                              (line 164)
* mpfr_mul_2ui:                          Arithmetic Functions.
                                                              (line 162)
* mpfr_mul_d:                            Arithmetic Functions.
                                                              (line  59)
* mpfr_mul_q:                            Arithmetic Functions.
                                                              (line  63)
* mpfr_mul_si:                           Arithmetic Functions.
                                                              (line  57)
* mpfr_mul_ui:                           Arithmetic Functions.
                                                              (line  55)
* mpfr_mul_z:                            Arithmetic Functions.
                                                              (line  61)
* mpfr_nanflag_p:                        Exception Related Functions.
                                                              (line 178)
* mpfr_nan_p:                            Comparison Functions.
                                                              (line  40)
* mpfr_neg:                              Arithmetic Functions.
                                                              (line 144)
* mpfr_nextabove:                        Miscellaneous Functions.
                                                              (line  20)
* mpfr_nextbelow:                        Miscellaneous Functions.
                                                              (line  21)
* mpfr_nexttoward:                       Miscellaneous Functions.
                                                              (line   6)
* mpfr_nrandom:                          Miscellaneous Functions.
                                                              (line  77)
* mpfr_number_p:                         Comparison Functions.
                                                              (line  42)
* mpfr_out_str:                          Input and Output Functions.
                                                              (line  15)
* mpfr_overflow_p:                       Exception Related Functions.
                                                              (line 176)
* mpfr_pow:                              Transcendental Functions.
                                                              (line  58)
* mpfr_pown:                             Transcendental Functions.
                                                              (line  70)
* mpfr_powr:                             Transcendental Functions.
                                                              (line  60)
* mpfr_pow_si:                           Transcendental Functions.
                                                              (line  64)
* mpfr_pow_sj:                           Transcendental Functions.
                                                              (line  68)
* mpfr_pow_ui:                           Transcendental Functions.
                                                              (line  62)
* mpfr_pow_uj:                           Transcendental Functions.
                                                              (line  66)
* mpfr_pow_z:                            Transcendental Functions.
                                                              (line  72)
* mpfr_prec_round:                       Rounding-Related Functions.
                                                              (line  13)
* mpfr_prec_t:                           Nomenclature and Types.
                                                              (line  33)
* mpfr_printf:                           Formatted Output Functions.
                                                              (line 186)
* mpfr_print_rnd_mode:                   Rounding-Related Functions.
                                                              (line  90)
* mpfr_ptr:                              Nomenclature and Types.
                                                              (line   6)
* mpfr_rec_sqrt:                         Arithmetic Functions.
                                                              (line 109)
* mpfr_regular_p:                        Comparison Functions.
                                                              (line  44)
* mpfr_reldiff:                          Compatibility with MPF.
                                                              (line  46)
* mpfr_remainder:                        Integer and Remainder Related Functions.
                                                              (line 113)
* mpfr_remquo:                           Integer and Remainder Related Functions.
                                                              (line 115)
* mpfr_rint:                             Integer and Remainder Related Functions.
                                                              (line   6)
* mpfr_rint_ceil:                        Integer and Remainder Related Functions.
                                                              (line  53)
* mpfr_rint_floor:                       Integer and Remainder Related Functions.
                                                              (line  54)
* mpfr_rint_round:                       Integer and Remainder Related Functions.
                                                              (line  56)
* mpfr_rint_roundeven:                   Integer and Remainder Related Functions.
                                                              (line  58)
* mpfr_rint_trunc:                       Integer and Remainder Related Functions.
                                                              (line  60)
* mpfr_rnd_t:                            Nomenclature and Types.
                                                              (line  53)
* mpfr_root:                             Arithmetic Functions.
                                                              (line 133)
* mpfr_rootn_si:                         Arithmetic Functions.
                                                              (line 121)
* mpfr_rootn_ui:                         Arithmetic Functions.
                                                              (line 119)
* mpfr_round:                            Integer and Remainder Related Functions.
                                                              (line   9)
* mpfr_roundeven:                        Integer and Remainder Related Functions.
                                                              (line  10)
* mpfr_round_nearest_away:               Rounding-Related Functions.
                                                              (line  96)
* mpfr_sec:                              Transcendental Functions.
                                                              (line 162)
* mpfr_sech:                             Transcendental Functions.
                                                              (line 252)
* mpfr_set:                              Assignment Functions.
                                                              (line   9)
* mpfr_setsign:                          Miscellaneous Functions.
                                                              (line 131)
* mpfr_set_d:                            Assignment Functions.
                                                              (line  16)
* mpfr_set_decimal128:                   Assignment Functions.
                                                              (line  23)
* mpfr_set_decimal64:                    Assignment Functions.
                                                              (line  21)
* mpfr_set_default_prec:                 Initialization Functions.
                                                              (line 103)
* mpfr_set_default_rounding_mode:        Rounding-Related Functions.
                                                              (line   6)
* mpfr_set_divby0:                       Exception Related Functions.
                                                              (line 168)
* mpfr_set_emax:                         Exception Related Functions.
                                                              (line  16)
* mpfr_set_emin:                         Exception Related Functions.
                                                              (line  15)
* mpfr_set_erangeflag:                   Exception Related Functions.
                                                              (line 171)
* mpfr_set_exp:                          Miscellaneous Functions.
                                                              (line 122)
* mpfr_set_f:                            Assignment Functions.
                                                              (line  27)
* mpfr_set_float128:                     Assignment Functions.
                                                              (line  19)
* mpfr_set_flt:                          Assignment Functions.
                                                              (line  15)
* mpfr_set_inexflag:                     Exception Related Functions.
                                                              (line 170)
* mpfr_set_inf:                          Assignment Functions.
                                                              (line 158)
* mpfr_set_ld:                           Assignment Functions.
                                                              (line  17)
* mpfr_set_nan:                          Assignment Functions.
                                                              (line 157)
* mpfr_set_nanflag:                      Exception Related Functions.
                                                              (line 169)
* mpfr_set_overflow:                     Exception Related Functions.
                                                              (line 167)
* mpfr_set_prec:                         Initialization Functions.
                                                              (line 138)
* mpfr_set_prec_raw:                     Compatibility with MPF.
                                                              (line  29)
* mpfr_set_q:                            Assignment Functions.
                                                              (line  26)
* mpfr_set_si:                           Assignment Functions.
                                                              (line  12)
* mpfr_set_si_2exp:                      Assignment Functions.
                                                              (line  63)
* mpfr_set_sj:                           Assignment Functions.
                                                              (line  14)
* mpfr_set_sj_2exp:                      Assignment Functions.
                                                              (line  67)
* mpfr_set_str:                          Assignment Functions.
                                                              (line  75)
* mpfr_set_ui:                           Assignment Functions.
                                                              (line  10)
* mpfr_set_ui_2exp:                      Assignment Functions.
                                                              (line  61)
* mpfr_set_uj:                           Assignment Functions.
                                                              (line  13)
* mpfr_set_uj_2exp:                      Assignment Functions.
                                                              (line  65)
* mpfr_set_underflow:                    Exception Related Functions.
                                                              (line 166)
* mpfr_set_z:                            Assignment Functions.
                                                              (line  25)
* mpfr_set_zero:                         Assignment Functions.
                                                              (line 159)
* mpfr_set_z_2exp:                       Assignment Functions.
                                                              (line  69)
* mpfr_sgn:                              Comparison Functions.
                                                              (line  50)
* mpfr_signbit:                          Miscellaneous Functions.
                                                              (line 127)
* mpfr_sin:                              Transcendental Functions.
                                                              (line 124)
* mpfr_sinh:                             Transcendental Functions.
                                                              (line 239)
* mpfr_sinh_cosh:                        Transcendental Functions.
                                                              (line 244)
* mpfr_sinpi:                            Transcendental Functions.
                                                              (line 146)
* mpfr_sinu:                             Transcendental Functions.
                                                              (line 131)
* mpfr_sin_cos:                          Transcendental Functions.
                                                              (line 152)
* mpfr_si_div:                           Arithmetic Functions.
                                                              (line  81)
* mpfr_si_sub:                           Arithmetic Functions.
                                                              (line  32)
* mpfr_snprintf:                         Formatted Output Functions.
                                                              (line 202)
* mpfr_sprintf:                          Formatted Output Functions.
                                                              (line 192)
* mpfr_sqr:                              Arithmetic Functions.
                                                              (line  72)
* mpfr_sqrt:                             Arithmetic Functions.
                                                              (line 101)
* mpfr_sqrt_ui:                          Arithmetic Functions.
                                                              (line 102)
* mpfr_srcptr:                           Nomenclature and Types.
                                                              (line   6)
* mpfr_strtofr:                          Assignment Functions.
                                                              (line  94)
* mpfr_sub:                              Arithmetic Functions.
                                                              (line  26)
* mpfr_subnormalize:                     Exception Related Functions.
                                                              (line  73)
* mpfr_sub_d:                            Arithmetic Functions.
                                                              (line  38)
* mpfr_sub_q:                            Arithmetic Functions.
                                                              (line  44)
* mpfr_sub_si:                           Arithmetic Functions.
                                                              (line  34)
* mpfr_sub_ui:                           Arithmetic Functions.
                                                              (line  30)
* mpfr_sub_z:                            Arithmetic Functions.
                                                              (line  42)
* mpfr_sum:                              Arithmetic Functions.
                                                              (line 210)
* mpfr_swap:                             Assignment Functions.
                                                              (line 166)
* mpfr_t:                                Nomenclature and Types.
                                                              (line   6)
* mpfr_tan:                              Transcendental Functions.
                                                              (line 125)
* mpfr_tanh:                             Transcendental Functions.
                                                              (line 240)
* mpfr_tanpi:                            Transcendental Functions.
                                                              (line 147)
* mpfr_tanu:                             Transcendental Functions.
                                                              (line 133)
* mpfr_total_order_p:                    Comparison Functions.
                                                              (line  74)
* mpfr_trunc:                            Integer and Remainder Related Functions.
                                                              (line  11)
* mpfr_ui_div:                           Arithmetic Functions.
                                                              (line  77)
* mpfr_ui_pow:                           Transcendental Functions.
                                                              (line  76)
* mpfr_ui_pow_ui:                        Transcendental Functions.
                                                              (line  74)
* mpfr_ui_sub:                           Arithmetic Functions.
                                                              (line  28)
* mpfr_underflow_p:                      Exception Related Functions.
                                                              (line 175)
* mpfr_unordered_p:                      Comparison Functions.
                                                              (line  70)
* mpfr_urandom:                          Miscellaneous Functions.
                                                              (line  58)
* mpfr_urandomb:                         Miscellaneous Functions.
                                                              (line  39)
* mpfr_vasprintf:                        Formatted Output Functions.
                                                              (line 216)
* MPFR_VERSION:                          Miscellaneous Functions.
                                                              (line 147)
* MPFR_VERSION_MAJOR:                    Miscellaneous Functions.
                                                              (line 148)
* MPFR_VERSION_MINOR:                    Miscellaneous Functions.
                                                              (line 149)
* MPFR_VERSION_NUM:                      Miscellaneous Functions.
                                                              (line 167)
* MPFR_VERSION_PATCHLEVEL:               Miscellaneous Functions.
                                                              (line 150)
* MPFR_VERSION_STRING:                   Miscellaneous Functions.
                                                              (line 151)
* mpfr_vfprintf:                         Formatted Output Functions.
                                                              (line 180)
* mpfr_vprintf:                          Formatted Output Functions.
                                                              (line 187)
* mpfr_vsnprintf:                        Formatted Output Functions.
                                                              (line 204)
* mpfr_vsprintf:                         Formatted Output Functions.
                                                              (line 193)
* mpfr_y0:                               Transcendental Functions.
                                                              (line 345)
* mpfr_y1:                               Transcendental Functions.
                                                              (line 346)
* mpfr_yn:                               Transcendental Functions.
                                                              (line 347)
* mpfr_zero_p:                           Comparison Functions.
                                                              (line  43)
* mpfr_zeta:                             Transcendental Functions.
                                                              (line 323)
* mpfr_zeta_ui:                          Transcendental Functions.
                                                              (line 324)
* mpfr_z_sub:                            Arithmetic Functions.
                                                              (line  40)



Tag Table:
Node: Top777
Node: Copying2044
Node: Introduction to MPFR3808
Node: Installing MPFR6204
Node: Reporting Bugs11769
Node: MPFR Basics13800
Node: Headers and Libraries14154
Node: Nomenclature and Types17752
Node: MPFR Variable Conventions21070
Node: Rounding22606
Ref: ternary value26414
Node: Floating-Point Values on Special Numbers28405
Node: Exceptions31998
Node: Memory Handling35842
Node: Getting the Best Efficiency Out of MPFR39593
Node: MPFR Interface40609
Node: Initialization Functions42929
Node: Assignment Functions50458
Node: Combined Initialization and Assignment Functions60763
Node: Conversion Functions62064
Ref: mpfr_get_str_ndigits67975
Ref: mpfr_get_str68606
Node: Arithmetic Functions73578
Node: Comparison Functions85862
Node: Transcendental Functions90153
Ref: mpfr_pow93372
Node: Input and Output Functions111192
Node: Formatted Output Functions116694
Node: Integer and Remainder Related Functions127816
Node: Rounding-Related Functions135539
Node: Miscellaneous Functions142161
Node: Exception Related Functions153203
Node: Memory Handling Functions163456
Node: Compatibility with MPF165347
Node: Custom Interface168522
Node: Internals173308
Node: API Compatibility174852
Node: Type and Macro Changes176800
Node: Added Functions179985
Node: Changed Functions185557
Node: Removed Functions193324
Node: Other Changes194054
Node: MPFR and the IEEE 754 Standard195757
Node: Contributors198411
Node: References201550
Node: GNU Free Documentation License203613
Node: Concept Index226207
Node: Function and Type Index232280

End Tag Table


Local Variables:
coding: utf-8
End: