# Writing for seamless chains The workflow makes the *mechanics* of a join invisible. Whether the join *reads* as invisible is decided by the script. These rules are render-verified: every one of them was written after a specific failure. --- ## The script format One prompt per shot, with `---` on its own line between shots: ``` Shot 1 prompt... --- Shot 2 prompt... --- Shot 3 prompt... ``` `{"prompts": ["...", "..."]}` is also accepted, which is what the LLM writer emits. `shot_count` is the TOTAL number of shots, not a per-prompt multiplier. `shot_count = 0` renders one shot per `---` block - that is the setting you want when you have written the shots yourself. Setting it to `1..8` forces that many shots — extra prompts are dropped, and if there are too few, the last prompt continues. --- ## The five rules ### 1. The airlock Every shot after the first **opens holding the previous shot's exact closing arrangement** — same people, same positions, same framing — and stays quiet for about two seconds before anyone speaks. > *"She sits exactly as she was, both hands flat on the bench, lips closed. > For the first couple of seconds she only breathes, shifting her weight > slightly, and only then she says: ..."* Why: the head of a chained shot is a regeneration of the previous shot's tail. It is discarded on decode. Anything you put there is thrown away. ### 2. Give the hold something to do A held framing with *nothing happening* renders as a literal freeze, and two seconds of a motionless actor looks like the video stalled. Write in a breath, a weight shift, an eyeline change. The camera holds still; the performer does not. ### 3. Land settled Every shot **ends** back in a stable arrangement with the dialogue finished and about two seconds to spare. The arrangement you hand over is the arrangement the next shot must open holding. ### 4. A line never straddles two shots Budget it: *spoken dialogue at natural pace + 4 seconds of quiet* must fit inside the shot length. At 24 fps: - **362 frames** (~15.1 s) is the trained maximum and the shipped default. About 11 s of that is speakable once the head and tail are reserved — roughly 27 words. - **243 frames** (~10.1 s) fits one shorter line: about 6 s speakable, roughly 15 words. - **124 frames** (~5.2 s) does **not** work — the model drops the airlock to cram the line in, and the join audibly clips. The shipped `example_script.txt` is written to the 362-frame budget: four shots, 24–29 words of dialogue each. If a line does not fit, move the *whole* line to the next shot. Never split it. ### 5. Repeat the descriptions word-for-word Restate each character's full appearance description **and** the room/lighting description **verbatim** in every shot. Not paraphrased — identical. This is half of how identity holds (see below). Rewording a character's description between shots is the single most common cause of a face changing mid-scene. --- ### 6. Change something physical in every shot Rule 5 is about **appearance and the room** - a character's description and the lighting, restated identically. It is *not* an instruction to restate the action, and reading it that way is the most common cause of a chain that stops progressing: shot 3 comes back as a near-copy of shot 2. The reason is that the model is separately instructed to preserve the subject, the room and the colour temperature. When shot 3's text is nearly identical to shot 2's, "keep everything the same" is the only clear signal in the prompt, and that is what you get. So each shot's action has to leave the world in a state the previous shot's world was **not** in. Physical and irreversible, not a mood or a camera move: * weak - *"Marcus looks at the clipboard and frowns."* Could be any shot. * strong - *"Marcus tears the top sheet off, crumples it and drops it; the bare second page is now uppermost."* Shot 4 cannot be mistaken for this one. The test: if you can swap two shots' action lines and the script still reads correctly, the model cannot tell them apart either. Two things actively work against you here, both because CFG is 1.0 and there is no negative branch to subtract anything: **negations get rendered** ("the shot does not repeat" puts *repeat* in the conditioning), and **stillness phrases freeze the whole frame** ("goes still", "does not move"). Say what changes, not what does not. ## How identity holds with no reference images Two mechanisms, stacked, and neither works alone: **The frame relay** carries the instance. Every shot begins from an actual rendered picture of the character — the previous shot's last frame — so the specific face, the wardrobe weathering, the exact hair all propagate as pixels rather than being re-imagined from a text description. Drift can only accumulate *per join*, not per frame. **The verbatim text** carries the category. It re-asserts everything the frame cannot pin down, and it authors anyone who walks into frame partway through the scene. Once they are in a handed-over frame, they join the relay too. A 40-second two-character scene held both faces this way with **zero reference images supplied**. For longer chains, characters who leave frame for a long stretch, or when you need a *specific* pre-existing face, add a reference image — the sampler's `start_image` (identity anchor) or `reference_images` input. --- ## Contradictions render as unions Chained shots are conditioned on the previous shot's picture. If shot 3 opens describing a *different* arrangement of people than shot 2 closed on, the model does not choose — you get both. Extra people, doubled props. Change the scene **mid-shot**, after the airlock. Never at the boundary. --- ## Camera cuts Camera cuts *inside* a shot are free — H3 renders them natively and they share one continuous audio bed. Write them as part of the prompt. Continuity lives *between* shots. So: put cuts inside shots, put continuity between them. --- ## Frame rate Keep the mux at **24 fps**. Other rates audibly shift voice accents — this is a property of the model's audio lane, not a muxing artifact.