Update README.md

README.md

@@ -28,11 +28,15 @@ tags:
 ## If you are downloading on Huggingface, follow these directions! 
 ## DO NOT Use the `Use This Model` feature in Huggingface!
 <details>
-  1. Select the model you would like to use *(The regular model, as well as the small model is recommended)*
+  <summary>Andy-4 Huggingface Install Directions</summary>
+
+  Method One:
+  
+  1. Select the model you would like to use
   
   2. Download the Modelfile
 
-  3. Once downloaded, open Modelfile in a text editor, and change the path to the download location of the gguf file
+  3. Once downloaded, open Modelfile in a text editor, and change the `FROM` parameter from `YOUR/PATH/HERE` to the download location of the gguf file, this has to be exact!
      
   4. When changed, save the file, and open command terminal
   
@@ -41,7 +45,7 @@ tags:
   6. Run the command `ollama create sweaterdog/Andy-4 -f Modelfile` If you want multiple models, include a tag afterwards. Example: sweaterdog/Andy-4:micro-fp16 or sweaterdog/Andy-4:q2_k
   
   7. Go to a profile in MindCraft
-  8. Change the model to be `sweaterdog/Andy-3.5` *Or whatever you named your model*
+  8. Change the model to be `sweaterdog/Andy-4` *Or whatever you named your model*
   
   9. Ensure you have the emdedding tag set to Ollama, like below
   ```
@@ -54,6 +58,42 @@ tags:
 
   }
   ```
+
+  Method Two:
+  
+  1. Download the Modelfile
+
+  2. Once downloaded, open Modelfile in a text editor, and change the `FROM` parameter from `YOUR/PATH/HERE` To one of the models listed here in the `Use This Model` tab under ollama, here are the options:
+    ```
+    hf.co/Sweaterdog/Andy-4:Q2_K
+    hf.co/Sweaterdog/Andy-4:Q3_K_M
+    hf.co/Sweaterdog/Andy-4:Q4_K_M
+    hf.co/Sweaterdog/Andy-4:Q5_K_M
+    hf.co/Sweaterdog/Andy-4:Q8_0
+    hf.co/Sweaterdog/Andy-4:F16
+    ```
+       
+  3. When changed, save the file, and open command terminal
+  
+  4. *(Optional if CMD isn't opened via file explorer)* Navigate to the correct directory using "cd"
+  
+  5. Run the command `ollama create sweaterdog/Andy-4 -f Modelfile` If you want multiple models, include a tag afterwards. Example: sweaterdog/Andy-4:micro-fp16 or sweaterdog/Andy-4:q2_k
+  
+  6. Go to a profile in MindCraft
+
+  7. Change the model to be `sweaterdog/Andy-4` *Or whatever you named your model*
+  
+  8. Ensure you have the emdedding tag set to Ollama, like below
+  ```
+  {
+    "name": "andy-4",
+
+    "model": "Sweaterdog/Andy-4",
+
+    "embedding": "ollama"
+
+  }
+  ```
 </details>
 
 ## DO NOT SKIP THIS SECTION IF YOU INTEND ON INSTALLING OFF OF HUGGINGFACE