esmfold2_residue_constants.py

# Copyright 2025 EvolutionaryScale
# Copyright 2021 AlQuraishi Laboratory
# Copyright 2021 DeepMind Technologies Limited
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Constants used in AlphaFold."""

import collections
import functools
from pathlib import Path
from typing import List, Mapping, Tuple

import numpy as np

# import tree

# Internal import (35fd).


# Distance from one CA to next CA [trans configuration: omega = 180].
ca_ca = 3.80209737096

# Format: The list for each AA type contains chi1, chi2, chi3, chi4 in
# this order (or a relevant subset from chi1 onwards). ALA and GLY don't have
# chi angles so their chi angle lists are empty.
chi_angles_atoms = {
    "ALA": [],
    # Chi5 in arginine is always 0 +- 5 degrees, so ignore it.
    "ARG": [
        ["N", "CA", "CB", "CG"],
        ["CA", "CB", "CG", "CD"],
        ["CB", "CG", "CD", "NE"],
        ["CG", "CD", "NE", "CZ"],
    ],
    "ASN": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "OD1"]],
    "ASP": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "OD1"]],
    "CYS": [["N", "CA", "CB", "SG"]],
    "GLN": [
        ["N", "CA", "CB", "CG"],
        ["CA", "CB", "CG", "CD"],
        ["CB", "CG", "CD", "OE1"],
    ],
    "GLU": [
        ["N", "CA", "CB", "CG"],
        ["CA", "CB", "CG", "CD"],
        ["CB", "CG", "CD", "OE1"],
    ],
    "GLY": [],
    "HIS": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "ND1"]],
    "ILE": [["N", "CA", "CB", "CG1"], ["CA", "CB", "CG1", "CD1"]],
    "LEU": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "CD1"]],
    "LYS": [
        ["N", "CA", "CB", "CG"],
        ["CA", "CB", "CG", "CD"],
        ["CB", "CG", "CD", "CE"],
        ["CG", "CD", "CE", "NZ"],
    ],
    "MET": [
        ["N", "CA", "CB", "CG"],
        ["CA", "CB", "CG", "SD"],
        ["CB", "CG", "SD", "CE"],
    ],
    "PHE": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "CD1"]],
    "PRO": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "CD"]],
    "SER": [["N", "CA", "CB", "OG"]],
    "THR": [["N", "CA", "CB", "OG1"]],
    "TRP": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "CD1"]],
    "TYR": [["N", "CA", "CB", "CG"], ["CA", "CB", "CG", "CD1"]],
    "VAL": [["N", "CA", "CB", "CG1"]],
    "UNK": [],
}

# If chi angles given in fixed-length array, this matrix determines how to mask
# them for each AA type. The order is as per restype_order (see below).
chi_angles_mask = [
    [0.0, 0.0, 0.0, 0.0],  # ALA
    [1.0, 1.0, 1.0, 1.0],  # ARG
    [1.0, 1.0, 0.0, 0.0],  # ASN
    [1.0, 1.0, 0.0, 0.0],  # ASP
    [1.0, 0.0, 0.0, 0.0],  # CYS
    [1.0, 1.0, 1.0, 0.0],  # GLN
    [1.0, 1.0, 1.0, 0.0],  # GLU
    [0.0, 0.0, 0.0, 0.0],  # GLY
    [1.0, 1.0, 0.0, 0.0],  # HIS
    [1.0, 1.0, 0.0, 0.0],  # ILE
    [1.0, 1.0, 0.0, 0.0],  # LEU
    [1.0, 1.0, 1.0, 1.0],  # LYS
    [1.0, 1.0, 1.0, 0.0],  # MET
    [1.0, 1.0, 0.0, 0.0],  # PHE
    [1.0, 1.0, 0.0, 0.0],  # PRO
    [1.0, 0.0, 0.0, 0.0],  # SER
    [1.0, 0.0, 0.0, 0.0],  # THR
    [1.0, 1.0, 0.0, 0.0],  # TRP
    [1.0, 1.0, 0.0, 0.0],  # TYR
    [1.0, 0.0, 0.0, 0.0],  # VAL
    [0.0, 0.0, 0.0, 0.0],  # UNK
]

# The following chi angles are pi periodic: they can be rotated by a multiple
# of pi without affecting the structure.
chi_pi_periodic = [
    [0.0, 0.0, 0.0, 0.0],  # ALA
    [0.0, 0.0, 0.0, 0.0],  # ARG
    [0.0, 0.0, 0.0, 0.0],  # ASN
    [0.0, 1.0, 0.0, 0.0],  # ASP
    [0.0, 0.0, 0.0, 0.0],  # CYS
    [0.0, 0.0, 0.0, 0.0],  # GLN
    [0.0, 0.0, 1.0, 0.0],  # GLU
    [0.0, 0.0, 0.0, 0.0],  # GLY
    [0.0, 0.0, 0.0, 0.0],  # HIS
    [0.0, 0.0, 0.0, 0.0],  # ILE
    [0.0, 0.0, 0.0, 0.0],  # LEU
    [0.0, 0.0, 0.0, 0.0],  # LYS
    [0.0, 0.0, 0.0, 0.0],  # MET
    [0.0, 1.0, 0.0, 0.0],  # PHE
    [0.0, 0.0, 0.0, 0.0],  # PRO
    [0.0, 0.0, 0.0, 0.0],  # SER
    [0.0, 0.0, 0.0, 0.0],  # THR
    [0.0, 0.0, 0.0, 0.0],  # TRP
    [0.0, 1.0, 0.0, 0.0],  # TYR
    [0.0, 0.0, 0.0, 0.0],  # VAL
    [0.0, 0.0, 0.0, 0.0],  # UNK
]

# Atoms positions relative to the 8 rigid groups, defined by the pre-omega, phi,
# psi and chi angles:
# 0: 'backbone group',
# 1: 'pre-omega-group', (empty)
# 2: 'phi-group', (currently empty, because it defines only hydrogens)
# 3: 'psi-group',
# 4,5,6,7: 'chi1,2,3,4-group'
# The atom positions are relative to the axis-end-atom of the corresponding
# rotation axis. The x-axis is in direction of the rotation axis, and the y-axis
# is defined such that the dihedral-angle-definiting atom (the last entry in
# chi_angles_atoms above) is in the xy-plane (with a positive y-coordinate).
# format: [atomname, group_idx, rel_position]
rigid_group_atom_positions = {
    "ALA": [
        ["N", 0, (-0.525, 1.363, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, -0.000, -0.000)],
        ["CB", 0, (-0.529, -0.774, -1.205)],
        ["O", 3, (0.627, 1.062, 0.000)],
    ],
    "ARG": [
        ["N", 0, (-0.524, 1.362, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, -0.000, -0.000)],
        ["CB", 0, (-0.524, -0.778, -1.209)],
        ["O", 3, (0.626, 1.062, 0.000)],
        ["CG", 4, (0.616, 1.390, -0.000)],
        ["CD", 5, (0.564, 1.414, 0.000)],
        ["NE", 6, (0.539, 1.357, -0.000)],
        ["NH1", 7, (0.206, 2.301, 0.000)],
        ["NH2", 7, (2.078, 0.978, -0.000)],
        ["CZ", 7, (0.758, 1.093, -0.000)],
    ],
    "ASN": [
        ["N", 0, (-0.536, 1.357, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, -0.000, -0.000)],
        ["CB", 0, (-0.531, -0.787, -1.200)],
        ["O", 3, (0.625, 1.062, 0.000)],
        ["CG", 4, (0.584, 1.399, 0.000)],
        ["ND2", 5, (0.593, -1.188, 0.001)],
        ["OD1", 5, (0.633, 1.059, 0.000)],
    ],
    "ASP": [
        ["N", 0, (-0.525, 1.362, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.527, 0.000, -0.000)],
        ["CB", 0, (-0.526, -0.778, -1.208)],
        ["O", 3, (0.626, 1.062, -0.000)],
        ["CG", 4, (0.593, 1.398, -0.000)],
        ["OD1", 5, (0.610, 1.091, 0.000)],
        ["OD2", 5, (0.592, -1.101, -0.003)],
    ],
    "CYS": [
        ["N", 0, (-0.522, 1.362, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.524, 0.000, 0.000)],
        ["CB", 0, (-0.519, -0.773, -1.212)],
        ["O", 3, (0.625, 1.062, -0.000)],
        ["SG", 4, (0.728, 1.653, 0.000)],
    ],
    "GLN": [
        ["N", 0, (-0.526, 1.361, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, 0.000, 0.000)],
        ["CB", 0, (-0.525, -0.779, -1.207)],
        ["O", 3, (0.626, 1.062, -0.000)],
        ["CG", 4, (0.615, 1.393, 0.000)],
        ["CD", 5, (0.587, 1.399, -0.000)],
        ["NE2", 6, (0.593, -1.189, -0.001)],
        ["OE1", 6, (0.634, 1.060, 0.000)],
    ],
    "GLU": [
        ["N", 0, (-0.528, 1.361, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, -0.000, -0.000)],
        ["CB", 0, (-0.526, -0.781, -1.207)],
        ["O", 3, (0.626, 1.062, 0.000)],
        ["CG", 4, (0.615, 1.392, 0.000)],
        ["CD", 5, (0.600, 1.397, 0.000)],
        ["OE1", 6, (0.607, 1.095, -0.000)],
        ["OE2", 6, (0.589, -1.104, -0.001)],
    ],
    "GLY": [
        ["N", 0, (-0.572, 1.337, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.517, -0.000, -0.000)],
        ["O", 3, (0.626, 1.062, -0.000)],
    ],
    "HIS": [
        ["N", 0, (-0.527, 1.360, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, 0.000, 0.000)],
        ["CB", 0, (-0.525, -0.778, -1.208)],
        ["O", 3, (0.625, 1.063, 0.000)],
        ["CG", 4, (0.600, 1.370, -0.000)],
        ["CD2", 5, (0.889, -1.021, 0.003)],
        ["ND1", 5, (0.744, 1.160, -0.000)],
        ["CE1", 5, (2.030, 0.851, 0.002)],
        ["NE2", 5, (2.145, -0.466, 0.004)],
    ],
    "ILE": [
        ["N", 0, (-0.493, 1.373, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.527, -0.000, -0.000)],
        ["CB", 0, (-0.536, -0.793, -1.213)],
        ["O", 3, (0.627, 1.062, -0.000)],
        ["CG1", 4, (0.534, 1.437, -0.000)],
        ["CG2", 4, (0.540, -0.785, -1.199)],
        ["CD1", 5, (0.619, 1.391, 0.000)],
    ],
    "LEU": [
        ["N", 0, (-0.520, 1.363, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, -0.000, -0.000)],
        ["CB", 0, (-0.522, -0.773, -1.214)],
        ["O", 3, (0.625, 1.063, -0.000)],
        ["CG", 4, (0.678, 1.371, 0.000)],
        ["CD1", 5, (0.530, 1.430, -0.000)],
        ["CD2", 5, (0.535, -0.774, 1.200)],
    ],
    "LYS": [
        ["N", 0, (-0.526, 1.362, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, 0.000, 0.000)],
        ["CB", 0, (-0.524, -0.778, -1.208)],
        ["O", 3, (0.626, 1.062, -0.000)],
        ["CG", 4, (0.619, 1.390, 0.000)],
        ["CD", 5, (0.559, 1.417, 0.000)],
        ["CE", 6, (0.560, 1.416, 0.000)],
        ["NZ", 7, (0.554, 1.387, 0.000)],
    ],
    "MET": [
        ["N", 0, (-0.521, 1.364, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, 0.000, 0.000)],
        ["CB", 0, (-0.523, -0.776, -1.210)],
        ["O", 3, (0.625, 1.062, -0.000)],
        ["CG", 4, (0.613, 1.391, -0.000)],
        ["SD", 5, (0.703, 1.695, 0.000)],
        ["CE", 6, (0.320, 1.786, -0.000)],
    ],
    "PHE": [
        ["N", 0, (-0.518, 1.363, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.524, 0.000, -0.000)],
        ["CB", 0, (-0.525, -0.776, -1.212)],
        ["O", 3, (0.626, 1.062, -0.000)],
        ["CG", 4, (0.607, 1.377, 0.000)],
        ["CD1", 5, (0.709, 1.195, -0.000)],
        ["CD2", 5, (0.706, -1.196, 0.000)],
        ["CE1", 5, (2.102, 1.198, -0.000)],
        ["CE2", 5, (2.098, -1.201, -0.000)],
        ["CZ", 5, (2.794, -0.003, -0.001)],
    ],
    "PRO": [
        ["N", 0, (-0.566, 1.351, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.527, -0.000, 0.000)],
        ["CB", 0, (-0.546, -0.611, -1.293)],
        ["O", 3, (0.621, 1.066, 0.000)],
        ["CG", 4, (0.382, 1.445, 0.0)],
        # ['CD', 5, (0.427, 1.440, 0.0)],
        ["CD", 5, (0.477, 1.424, 0.0)],  # manually made angle 2 degrees larger
    ],
    "SER": [
        ["N", 0, (-0.529, 1.360, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, -0.000, -0.000)],
        ["CB", 0, (-0.518, -0.777, -1.211)],
        ["O", 3, (0.626, 1.062, -0.000)],
        ["OG", 4, (0.503, 1.325, 0.000)],
    ],
    "THR": [
        ["N", 0, (-0.517, 1.364, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, 0.000, -0.000)],
        ["CB", 0, (-0.516, -0.793, -1.215)],
        ["O", 3, (0.626, 1.062, 0.000)],
        ["CG2", 4, (0.550, -0.718, -1.228)],
        ["OG1", 4, (0.472, 1.353, 0.000)],
    ],
    "TRP": [
        ["N", 0, (-0.521, 1.363, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.525, -0.000, 0.000)],
        ["CB", 0, (-0.523, -0.776, -1.212)],
        ["O", 3, (0.627, 1.062, 0.000)],
        ["CG", 4, (0.609, 1.370, -0.000)],
        ["CD1", 5, (0.824, 1.091, 0.000)],
        ["CD2", 5, (0.854, -1.148, -0.005)],
        ["CE2", 5, (2.186, -0.678, -0.007)],
        ["CE3", 5, (0.622, -2.530, -0.007)],
        ["NE1", 5, (2.140, 0.690, -0.004)],
        ["CH2", 5, (3.028, -2.890, -0.013)],
        ["CZ2", 5, (3.283, -1.543, -0.011)],
        ["CZ3", 5, (1.715, -3.389, -0.011)],
    ],
    "TYR": [
        ["N", 0, (-0.522, 1.362, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.524, -0.000, -0.000)],
        ["CB", 0, (-0.522, -0.776, -1.213)],
        ["O", 3, (0.627, 1.062, -0.000)],
        ["CG", 4, (0.607, 1.382, -0.000)],
        ["CD1", 5, (0.716, 1.195, -0.000)],
        ["CD2", 5, (0.713, -1.194, -0.001)],
        ["CE1", 5, (2.107, 1.200, -0.002)],
        ["CE2", 5, (2.104, -1.201, -0.003)],
        ["OH", 5, (4.168, -0.002, -0.005)],
        ["CZ", 5, (2.791, -0.001, -0.003)],
    ],
    "VAL": [
        ["N", 0, (-0.494, 1.373, -0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.527, -0.000, -0.000)],
        ["CB", 0, (-0.533, -0.795, -1.213)],
        ["O", 3, (0.627, 1.062, -0.000)],
        ["CG1", 4, (0.540, 1.429, -0.000)],
        ["CG2", 4, (0.533, -0.776, 1.203)],
    ],
    # Assume alanine positions for unknown AA
    "UNK": [
        ["N", 0, (-0.525, 1.363, 0.000)],
        ["CA", 0, (0.000, 0.000, 0.000)],
        ["C", 0, (1.526, -0.000, -0.000)],
    ],
}

# A list of atoms (excluding hydrogen) for each AA type. PDB naming convention.
residue_atoms = {
    "ALA": ["C", "CA", "CB", "N", "O"],
    "ARG": ["C", "CA", "CB", "CG", "CD", "CZ", "N", "NE", "O", "NH1", "NH2"],
    "ASP": ["C", "CA", "CB", "CG", "N", "O", "OD1", "OD2"],
    "ASN": ["C", "CA", "CB", "CG", "N", "ND2", "O", "OD1"],
    "CYS": ["C", "CA", "CB", "N", "O", "SG"],
    "GLU": ["C", "CA", "CB", "CG", "CD", "N", "O", "OE1", "OE2"],
    "GLN": ["C", "CA", "CB", "CG", "CD", "N", "NE2", "O", "OE1"],
    "GLY": ["C", "CA", "N", "O"],
    "HIS": ["C", "CA", "CB", "CG", "CD2", "CE1", "N", "ND1", "NE2", "O"],
    "ILE": ["C", "CA", "CB", "CG1", "CG2", "CD1", "N", "O"],
    "LEU": ["C", "CA", "CB", "CG", "CD1", "CD2", "N", "O"],
    "LYS": ["C", "CA", "CB", "CG", "CD", "CE", "N", "NZ", "O"],
    "MET": ["C", "CA", "CB", "CG", "CE", "N", "O", "SD"],
    "PHE": ["C", "CA", "CB", "CG", "CD1", "CD2", "CE1", "CE2", "CZ", "N", "O"],
    "PRO": ["C", "CA", "CB", "CG", "CD", "N", "O"],
    "SER": ["C", "CA", "CB", "N", "O", "OG"],
    "THR": ["C", "CA", "CB", "CG2", "N", "O", "OG1"],
    "TRP": [
        "C",
        "CA",
        "CB",
        "CG",
        "CD1",
        "CD2",
        "CE2",
        "CE3",
        "CZ2",
        "CZ3",
        "CH2",
        "N",
        "NE1",
        "O",
    ],
    "TYR": ["C", "CA", "CB", "CG", "CD1", "CD2", "CE1", "CE2", "CZ", "N", "O", "OH"],
    "VAL": ["C", "CA", "CB", "CG1", "CG2", "N", "O"],
    "UNK": ["C", "CA", "N"],
}

# Naming swaps for ambiguous atom names.
# Due to symmetries in the amino acids the naming of atoms is ambiguous in
# 4 of the 20 amino acids.
# (The LDDT paper lists 7 amino acids as ambiguous, but the naming ambiguities
# in LEU, VAL and ARG can be resolved by using the 3d constellations of
# the 'ambiguous' atoms and their neighbours)
# TODO: ^ interpret this
residue_atom_renaming_swaps = {
    "ASP": {"OD1": "OD2"},
    "GLU": {"OE1": "OE2"},
    "PHE": {"CD1": "CD2", "CE1": "CE2"},
    "TYR": {"CD1": "CD2", "CE1": "CE2"},
}

# Van der Waals radii [Angstroem] of the atoms (from Wikipedia)
van_der_waals_radius = {"C": 1.7, "N": 1.55, "O": 1.52, "S": 1.8}

Bond = collections.namedtuple("Bond", ["atom1_name", "atom2_name", "length", "stddev"])
BondAngle = collections.namedtuple(
    "BondAngle", ["atom1_name", "atom2_name", "atom3name", "angle_rad", "stddev"]
)


@functools.lru_cache(maxsize=None)
def load_stereo_chemical_props() -> (
    Tuple[
        Mapping[str, List[Bond]],
        Mapping[str, List[Bond]],
        Mapping[str, List[BondAngle]],
    ]
):
    """Load stereo_chemical_props.txt into a nice structure.

    Load literature values for bond lengths and bond angles and translate
    bond angles into the length of the opposite edge of the triangle
    ("residue_virtual_bonds").

    Returns:
      residue_bonds:  dict that maps resname --> list of Bond tuples
      residue_virtual_bonds: dict that maps resname --> list of Bond tuples
      residue_bond_angles: dict that maps resname --> list of BondAngle tuples
    """
    stereo_chemical_props = Path(
        "evolutionaryscale/structure/stereo_chemical_props.txt"
    ).read_text()

    lines_iter = iter(stereo_chemical_props.splitlines())
    # Load bond lengths.
    residue_bonds = {}
    next(lines_iter)  # Skip header line.
    for line in lines_iter:
        if line.strip() == "-":
            break
        bond, resname, length, stddev = line.split()
        atom1, atom2 = bond.split("-")
        if resname not in residue_bonds:
            residue_bonds[resname] = []
        residue_bonds[resname].append(Bond(atom1, atom2, float(length), float(stddev)))
    residue_bonds["UNK"] = []

    # Load bond angles.
    residue_bond_angles = {}
    next(lines_iter)  # Skip empty line.
    next(lines_iter)  # Skip header line.
    for line in lines_iter:
        if line.strip() == "-":
            break
        bond, resname, angle_degree, stddev_degree = line.split()
        atom1, atom2, atom3 = bond.split("-")
        if resname not in residue_bond_angles:
            residue_bond_angles[resname] = []
        residue_bond_angles[resname].append(
            BondAngle(
                atom1,
                atom2,
                atom3,
                float(angle_degree) / 180.0 * np.pi,
                float(stddev_degree) / 180.0 * np.pi,
            )
        )
    residue_bond_angles["UNK"] = []

    def make_bond_key(atom1_name, atom2_name):
        """Unique key to lookup bonds."""
        return "-".join(sorted([atom1_name, atom2_name]))

    # Translate bond angles into distances ("virtual bonds").
    residue_virtual_bonds = {}
    for resname, bond_angles in residue_bond_angles.items():
        # Create a fast lookup dict for bond lengths.
        bond_cache = {}
        for b in residue_bonds[resname]:
            bond_cache[make_bond_key(b.atom1_name, b.atom2_name)] = b
        residue_virtual_bonds[resname] = []
        for ba in bond_angles:
            bond1 = bond_cache[make_bond_key(ba.atom1_name, ba.atom2_name)]
            bond2 = bond_cache[make_bond_key(ba.atom2_name, ba.atom3name)]

            # Compute distance between atom1 and atom3 using the law of cosines
            # c^2 = a^2 + b^2 - 2ab*cos(gamma).
            gamma = ba.angle_rad
            length = np.sqrt(
                bond1.length**2
                + bond2.length**2
                - 2 * bond1.length * bond2.length * np.cos(gamma)
            )

            # Propagation of uncertainty assuming uncorrelated errors.
            dl_outer = 0.5 / length
            dl_dgamma = (2 * bond1.length * bond2.length * np.sin(gamma)) * dl_outer
            dl_db1 = (2 * bond1.length - 2 * bond2.length * np.cos(gamma)) * dl_outer
            dl_db2 = (2 * bond2.length - 2 * bond1.length * np.cos(gamma)) * dl_outer
            stddev = np.sqrt(
                (dl_dgamma * ba.stddev) ** 2
                + (dl_db1 * bond1.stddev) ** 2
                + (dl_db2 * bond2.stddev) ** 2
            )
            residue_virtual_bonds[resname].append(
                Bond(ba.atom1_name, ba.atom3name, length, stddev)
            )

    return (residue_bonds, residue_virtual_bonds, residue_bond_angles)


# Between-residue bond lengths for general bonds (first element) and for Proline
# (second element).
between_res_bond_length_c_n = [1.329, 1.341]
between_res_bond_length_stddev_c_n = [0.014, 0.016]

# Between-residue cos_angles.
between_res_cos_angles_c_n_ca = [-0.5203, 0.0353]  # degrees: 121.352 +- 2.315
between_res_cos_angles_ca_c_n = [-0.4473, 0.0311]  # degrees: 116.568 +- 1.995

# This mapping is used when we need to store atom data in a format that requires
# fixed atom data size for every residue (e.g. a numpy array).
atom_types = [
    "N",
    "CA",
    "C",
    "CB",
    "O",
    "CG",
    "CG1",
    "CG2",
    "OG",
    "OG1",
    "SG",
    "CD",
    "CD1",
    "CD2",
    "ND1",
    "ND2",
    "OD1",
    "OD2",
    "SD",
    "CE",
    "CE1",
    "CE2",
    "CE3",
    "NE",
    "NE1",
    "NE2",
    "OE1",
    "OE2",
    "CH2",
    "NH1",
    "NH2",
    "OH",
    "CZ",
    "CZ2",
    "CZ3",
    "NZ",
    "OXT",
]
atom_order = {atom_type: i for i, atom_type in enumerate(atom_types)}
atom_type_num = len(atom_types)  # := 37.

# A compact atom encoding with 14 columns
# pylint: disable=line-too-long
# pylint: disable=bad-whitespace
restype_name_to_atom14_names = {
    "ALA": ["N", "CA", "C", "O", "CB", "", "", "", "", "", "", "", "", ""],
    "ARG": [
        "N",
        "CA",
        "C",
        "O",
        "CB",
        "CG",
        "CD",
        "NE",
        "CZ",
        "NH1",
        "NH2",
        "",
        "",
        "",
    ],
    "ASN": ["N", "CA", "C", "O", "CB", "CG", "OD1", "ND2", "", "", "", "", "", ""],
    "ASP": ["N", "CA", "C", "O", "CB", "CG", "OD1", "OD2", "", "", "", "", "", ""],
    "CYS": ["N", "CA", "C", "O", "CB", "SG", "", "", "", "", "", "", "", ""],
    "GLN": ["N", "CA", "C", "O", "CB", "CG", "CD", "OE1", "NE2", "", "", "", "", ""],
    "GLU": ["N", "CA", "C", "O", "CB", "CG", "CD", "OE1", "OE2", "", "", "", "", ""],
    "GLY": ["N", "CA", "C", "O", "", "", "", "", "", "", "", "", "", ""],
    "HIS": [
        "N",
        "CA",
        "C",
        "O",
        "CB",
        "CG",
        "ND1",
        "CD2",
        "CE1",
        "NE2",
        "",
        "",
        "",
        "",
    ],
    "ILE": ["N", "CA", "C", "O", "CB", "CG1", "CG2", "CD1", "", "", "", "", "", ""],
    "LEU": ["N", "CA", "C", "O", "CB", "CG", "CD1", "CD2", "", "", "", "", "", ""],
    "LYS": ["N", "CA", "C", "O", "CB", "CG", "CD", "CE", "NZ", "", "", "", "", ""],
    "MET": ["N", "CA", "C", "O", "CB", "CG", "SD", "CE", "", "", "", "", "", ""],
    "PHE": [
        "N",
        "CA",
        "C",
        "O",
        "CB",
        "CG",
        "CD1",
        "CD2",
        "CE1",
        "CE2",
        "CZ",
        "",
        "",
        "",
    ],
    "PRO": ["N", "CA", "C", "O", "CB", "CG", "CD", "", "", "", "", "", "", ""],
    "SER": ["N", "CA", "C", "O", "CB", "OG", "", "", "", "", "", "", "", ""],
    "THR": ["N", "CA", "C", "O", "CB", "OG1", "CG2", "", "", "", "", "", "", ""],
    "TRP": [
        "N",
        "CA",
        "C",
        "O",
        "CB",
        "CG",
        "CD1",
        "CD2",
        "NE1",
        "CE2",
        "CE3",
        "CZ2",
        "CZ3",
        "CH2",
    ],
    "TYR": [
        "N",
        "CA",
        "C",
        "O",
        "CB",
        "CG",
        "CD1",
        "CD2",
        "CE1",
        "CE2",
        "CZ",
        "OH",
        "",
        "",
    ],
    "VAL": ["N", "CA", "C", "O", "CB", "CG1", "CG2", "", "", "", "", "", "", ""],
    "UNK": ["N", "CA", "C", "", "", "", "", "", "", "", "", "", "", ""],
}
# pylint: enable=line-too-long
# pylint: enable=bad-whitespace


# This is the standard residue order when coding AA type as a number.
# Reproduce it by taking 3-letter AA codes and sorting them alphabetically.
restypes = [
    "A",
    "R",
    "N",
    "D",
    "C",
    "Q",
    "E",
    "G",
    "H",
    "I",
    "L",
    "K",
    "M",
    "F",
    "P",
    "S",
    "T",
    "W",
    "Y",
    "V",
]
restype_order = {restype: i for i, restype in enumerate(restypes)}
restype_num = len(restypes)  # := 20.
unk_restype_index = restype_num  # Catch-all index for unknown restypes.

restypes_with_x = restypes + ["X"]
restype_order_with_x = {restype: i for i, restype in enumerate(restypes_with_x)}

bb_atoms = ["N", "CA", "C", "O"]

# Hydrophobicity by residue (positive values are hydrophobic). Derived from Black & Mould (1991), normalized by subtracting 0.5.
hydrophobicity = {
    "ALA": 0.116,
    "ARG": -0.5,
    "ASN": -0.264,
    "ASP": -0.472,
    "CYS": 0.18,
    "GLN": -0.249,
    "GLU": -0.457,
    "GLY": 0.001,
    "HIS": -0.335,
    "ILE": 0.443,
    "LEU": 0.443,
    "LYS": -0.217,
    "MET": 0.238,
    "PHE": 0.5,
    "PRO": 0.211,
    "SER": -0.141,
    "THR": -0.05,
    "TRP": 0.378,
    "TYR": 0.38,
    "VAL": 0.325,
}

# Side chain max accessible surface area in Ala-X-Ala tripeptide (from Chennamsetty et al. 2010).
side_chain_asa = {
    "ALA": 64.7809,
    "ARG": 210.02,
    "ASN": 113.187,
    "ASP": 110.209,
    "CYS": 95.2439,
    "GLN": 147.855,
    "GLU": 143.924,
    "GLY": 23.1338,
    "HIS": 146.449,
    "ILE": 151.242,
    "LEU": 139.524,
    "LYS": 177.366,
    "MET": 164.674,
    "PHE": 186.7,
    "PRO": 111.533,
    "SER": 81.2159,
    "THR": 111.597,
    "TRP": 229.619,
    "TYR": 200.306,
    "VAL": 124.237,
}

# Approximate Volumes of amino acids in cubic angstroms.
# https://www.imgt.org/IMGTeducation/Aide-memoire/_UK/aminoacids/abbreviation.html
amino_acid_volumes = {
    "A": 88.6,  # Alanine
    "R": 173.4,  # Arginine
    "N": 114.1,  # Asparagine
    "D": 111.1,  # Aspartic acid
    "C": 108.5,  # Cysteine
    "Q": 143.8,  # Glutamine
    "E": 138.4,  # Glutamic acid
    "G": 60.1,  # Glycine
    "H": 153.2,  # Histidine
    "I": 166.7,  # Isoleucine
    "L": 166.7,  # Leucine
    "K": 168.6,  # Lysine
    "M": 162.9,  # Methionine
    "F": 189.9,  # Phenylalanine
    "P": 112.7,  # Proline
    "S": 89.0,  # Serine
    "T": 116.1,  # Threonine
    "W": 227.8,  # Tryptophan
    "Y": 193.6,  # Tyrosine
    "V": 140.0,  # Valine
    "X": 88.6,  # Unknown, use Alanine as approximation
}


def sequence_to_onehot(
    sequence: str, mapping: Mapping[str, int], map_unknown_to_x: bool = False
) -> np.ndarray:
    """Maps the given sequence into a one-hot encoded matrix.

    Args:
      sequence: An amino acid sequence.
      mapping: A dictionary mapping amino acids to integers.
      map_unknown_to_x: If True, any amino acid that is not in the mapping will be
        mapped to the unknown amino acid 'X'. If the mapping doesn't contain
        amino acid 'X', an error will be thrown. If False, any amino acid not in
        the mapping will throw an error.

    Returns:
      A numpy array of shape (seq_len, num_unique_aas) with one-hot encoding of
      the sequence.

    Raises:
      ValueError: If the mapping doesn't contain values from 0 to
        num_unique_aas - 1 without any gaps.
    """
    num_entries = max(mapping.values()) + 1

    if sorted(set(mapping.values())) != list(range(num_entries)):
        raise ValueError(
            "The mapping must have values from 0 to num_unique_aas-1 "
            "without any gaps. Got: %s" % sorted(mapping.values())
        )

    one_hot_arr = np.zeros((len(sequence), num_entries), dtype=np.int32)

    for aa_index, aa_type in enumerate(sequence):
        if map_unknown_to_x:
            if aa_type.isalpha() and aa_type.isupper():
                aa_id = mapping.get(aa_type, mapping["X"])
            else:
                raise ValueError(f"Invalid character in the sequence: {aa_type}")
        else:
            aa_id = mapping[aa_type]
        one_hot_arr[aa_index, aa_id] = 1

    return one_hot_arr


restype_1to3 = {
    "A": "ALA",
    "R": "ARG",
    "N": "ASN",
    "D": "ASP",
    "C": "CYS",
    "Q": "GLN",
    "E": "GLU",
    "G": "GLY",
    "H": "HIS",
    "I": "ILE",
    "L": "LEU",
    "K": "LYS",
    "M": "MET",
    "F": "PHE",
    "P": "PRO",
    "S": "SER",
    "T": "THR",
    "W": "TRP",
    "Y": "TYR",
    "V": "VAL",
    "X": "UNK",
}


# NB: restype_3to1 differs from Bio.PDB.protein_letters_3to1 by being a simple
# 1-to-1 mapping of 3 letter names to one letter names. The latter contains
# many more, and less common, three letter names as keys and maps many of these
# to the same one letter name (including 'X' and 'U' which we don't use here).
restype_3to1 = {v: k for k, v in restype_1to3.items()}

# Define a restype name for all unknown residues.
unk_restype = "UNK"

resnames = [restype_1to3[r] for r in restypes] + [unk_restype]
resname_to_idx = {resname: i for i, resname in enumerate(resnames)}

hydrophobic_resnames = {"VAL", "ILE", "LEU", "PHE", "MET", "TRP"}

# The mapping here uses hhblits convention, so that B is mapped to D, J and O
# are mapped to X, U is mapped to C, and Z is mapped to E. Other than that the
# remaining 20 amino acids are kept in alphabetical order.
# There are 2 non-amino acid codes, X (representing any amino acid) and
# "-" representing a missing amino acid in an alignment.  The id for these
# codes is put at the end (20 and 21) so that they can easily be ignored if
# desired.
HHBLITS_AA_TO_ID = {
    "A": 0,
    "B": 2,
    "C": 1,
    "D": 2,
    "E": 3,
    "F": 4,
    "G": 5,
    "H": 6,
    "I": 7,
    "J": 20,
    "K": 8,
    "L": 9,
    "M": 10,
    "N": 11,
    "O": 20,
    "P": 12,
    "Q": 13,
    "R": 14,
    "S": 15,
    "T": 16,
    "U": 1,
    "V": 17,
    "W": 18,
    "X": 20,
    "Y": 19,
    "Z": 3,
    "-": 21,
}

# Partial inversion of HHBLITS_AA_TO_ID.
ID_TO_HHBLITS_AA = {
    0: "A",
    1: "C",  # Also U.
    2: "D",  # Also B.
    3: "E",  # Also Z.
    4: "F",
    5: "G",
    6: "H",
    7: "I",
    8: "K",
    9: "L",
    10: "M",
    11: "N",
    12: "P",
    13: "Q",
    14: "R",
    15: "S",
    16: "T",
    17: "V",
    18: "W",
    19: "Y",
    20: "X",  # Includes J and O.
    21: "-",
}

restypes_with_x_and_gap = restypes + ["X", "-"]
MAP_HHBLITS_AATYPE_TO_OUR_AATYPE = tuple(
    restypes_with_x_and_gap.index(ID_TO_HHBLITS_AA[i])
    for i in range(len(restypes_with_x_and_gap))
)


def _make_standard_atom_mask() -> np.ndarray:
    """Returns [num_res_types, num_atom_types] mask array."""
    # +1 to account for unknown (all 0s).
    mask = np.zeros([restype_num + 1, atom_type_num], dtype=np.int32)
    for restype, restype_letter in enumerate(restypes):
        restype_name = restype_1to3[restype_letter]
        atom_names = residue_atoms[restype_name]
        for atom_name in atom_names:
            atom_type = atom_order[atom_name]
            mask[restype, atom_type] = 1
    return mask


STANDARD_ATOM_MASK = _make_standard_atom_mask()


# A one hot representation for the first and second atoms defining the axis
# of rotation for each chi-angle in each residue.
def chi_angle_atom(atom_index: int) -> np.ndarray:
    """Define chi-angle rigid groups via one-hot representations."""
    chi_angles_index = {}
    one_hots = []

    for k, v in chi_angles_atoms.items():
        indices = [atom_types.index(s[atom_index]) for s in v]
        indices.extend([-1] * (4 - len(indices)))
        chi_angles_index[k] = indices

    for r in restypes:
        res3 = restype_1to3[r]
        one_hot = np.eye(atom_type_num)[chi_angles_index[res3]]
        one_hots.append(one_hot)

    one_hots.append(np.zeros([4, atom_type_num]))  # Add zeros for residue `X`.
    one_hot = np.stack(one_hots, axis=0)
    one_hot = np.transpose(one_hot, [0, 2, 1])

    return one_hot


chi_atom_1_one_hot = chi_angle_atom(1)
chi_atom_2_one_hot = chi_angle_atom(2)

# An array like chi_angles_atoms but using indices rather than names.
chi_angles_atom_indices = [chi_angles_atoms[restype_1to3[r]] for r in restypes]
# chi_angles_atom_indices = tree.map_structure(
#     lambda atom_name: atom_order[atom_name], chi_angles_atom_indices
# )
chi_angles_atom_indices = np.array(
    [
        chi_atoms + ([[0, 0, 0, 0]] * (4 - len(chi_atoms)))
        for chi_atoms in chi_angles_atom_indices
    ]
)

# Mapping from (res_name, atom_name) pairs to the atom's chi group index
# and atom index within that group.
chi_groups_for_atom = collections.defaultdict(list)
for res_name, chi_angle_atoms_for_res in chi_angles_atoms.items():
    for chi_group_i, chi_group in enumerate(chi_angle_atoms_for_res):
        for atom_i, atom in enumerate(chi_group):
            chi_groups_for_atom[(res_name, atom)].append((chi_group_i, atom_i))
chi_groups_for_atom = dict(chi_groups_for_atom)


def _make_rigid_transformation_4x4(ex, ey, translation):
    """Create a rigid 4x4 transformation matrix from two axes and transl."""
    # Normalize ex.
    ex_normalized = ex / np.linalg.norm(ex)

    # make ey perpendicular to ex
    ey_normalized = ey - np.dot(ey, ex_normalized) * ex_normalized
    ey_normalized /= np.linalg.norm(ey_normalized)

    # compute ez as cross product
    eznorm = np.cross(ex_normalized, ey_normalized)
    m = np.stack([ex_normalized, ey_normalized, eznorm, translation]).transpose()
    m = np.concatenate([m, [[0.0, 0.0, 0.0, 1.0]]], axis=0)
    return m


# create an array with (restype, atomtype) --> rigid_group_idx
# and an array with (restype, atomtype, coord) for the atom positions
# and compute affine transformation matrices (4,4) from one rigid group to the
# previous group
restype_atom37_to_rigid_group = np.zeros([21, 37], dtype=int)
restype_atom37_mask = np.zeros([21, 37], dtype=np.float32)
restype_atom37_rigid_group_positions = np.zeros([21, 37, 3], dtype=np.float32)
restype_atom14_to_rigid_group = np.zeros([21, 14], dtype=int)
restype_atom14_mask = np.zeros([21, 14], dtype=np.float32)
restype_atom14_rigid_group_positions = np.zeros([21, 14, 3], dtype=np.float32)
restype_rigid_group_default_frame = np.zeros([21, 8, 4, 4], dtype=np.float32)


def _make_rigid_group_constants():
    """Fill the arrays above."""
    for restype, restype_letter in enumerate(restypes_with_x):
        resname = restype_1to3[restype_letter]
        for atomname, group_idx, atom_position in rigid_group_atom_positions[resname]:
            atomtype = atom_order[atomname]
            restype_atom37_to_rigid_group[restype, atomtype] = group_idx
            restype_atom37_mask[restype, atomtype] = 1
            restype_atom37_rigid_group_positions[restype, atomtype, :] = atom_position

            atom14idx = restype_name_to_atom14_names[resname].index(atomname)
            restype_atom14_to_rigid_group[restype, atom14idx] = group_idx
            restype_atom14_mask[restype, atom14idx] = 1
            restype_atom14_rigid_group_positions[restype, atom14idx, :] = atom_position

    for restype, restype_letter in enumerate(restypes_with_x):
        resname = restype_1to3[restype_letter]
        atom_positions = {
            name: np.array(pos) for name, _, pos in rigid_group_atom_positions[resname]
        }

        # backbone to backbone is the identity transform
        restype_rigid_group_default_frame[restype, 0, :, :] = np.eye(4)

        # pre-omega-frame to backbone (currently dummy identity matrix)
        restype_rigid_group_default_frame[restype, 1, :, :] = np.eye(4)

        # phi-frame to backbone
        mat = _make_rigid_transformation_4x4(
            ex=atom_positions["N"] - atom_positions["CA"],
            ey=np.array([1.0, 0.0, 0.0]),
            translation=atom_positions["N"],
        )
        restype_rigid_group_default_frame[restype, 2, :, :] = mat

        # psi-frame to backbone
        mat = _make_rigid_transformation_4x4(
            ex=atom_positions["C"] - atom_positions["CA"],
            ey=atom_positions["CA"] - atom_positions["N"],
            translation=atom_positions["C"],
        )
        restype_rigid_group_default_frame[restype, 3, :, :] = mat

        # chi1-frame to backbone
        if chi_angles_mask[restype][0]:
            base_atom_names = chi_angles_atoms[resname][0]
            base_atom_positions = [atom_positions[name] for name in base_atom_names]
            mat = _make_rigid_transformation_4x4(
                ex=base_atom_positions[2] - base_atom_positions[1],
                ey=base_atom_positions[0] - base_atom_positions[1],
                translation=base_atom_positions[2],
            )
            restype_rigid_group_default_frame[restype, 4, :, :] = mat

        # chi2-frame to chi1-frame
        # chi3-frame to chi2-frame
        # chi4-frame to chi3-frame
        # luckily all rotation axes for the next frame start at (0,0,0) of the
        # previous frame
        for chi_idx in range(1, 4):
            if chi_angles_mask[restype][chi_idx]:
                axis_end_atom_name = chi_angles_atoms[resname][chi_idx][2]
                axis_end_atom_position = atom_positions[axis_end_atom_name]
                mat = _make_rigid_transformation_4x4(
                    ex=axis_end_atom_position,
                    ey=np.array([-1.0, 0.0, 0.0]),
                    translation=axis_end_atom_position,
                )
                restype_rigid_group_default_frame[restype, 4 + chi_idx, :, :] = mat


_make_rigid_group_constants()


def make_atom14_dists_bounds(overlap_tolerance=1.5, bond_length_tolerance_factor=15.0):
    """compute upper and lower bounds for bonds to assess violations."""
    restype_atom14_bond_lower_bound = np.zeros([21, 14, 14], np.float32)
    restype_atom14_bond_upper_bound = np.zeros([21, 14, 14], np.float32)
    restype_atom14_bond_stddev = np.zeros([21, 14, 14], np.float32)
    residue_bonds, residue_virtual_bonds, _ = load_stereo_chemical_props()
    for restype, restype_letter in enumerate(restypes):
        resname = restype_1to3[restype_letter]
        atom_list = restype_name_to_atom14_names[resname]

        # create lower and upper bounds for clashes
        for atom1_idx, atom1_name in enumerate(atom_list):
            if not atom1_name:
                continue
            atom1_radius = van_der_waals_radius[atom1_name[0]]
            for atom2_idx, atom2_name in enumerate(atom_list):
                if (not atom2_name) or atom1_idx == atom2_idx:
                    continue
                atom2_radius = van_der_waals_radius[atom2_name[0]]
                lower = atom1_radius + atom2_radius - overlap_tolerance
                upper = 1e10
                restype_atom14_bond_lower_bound[restype, atom1_idx, atom2_idx] = lower
                restype_atom14_bond_lower_bound[restype, atom2_idx, atom1_idx] = lower
                restype_atom14_bond_upper_bound[restype, atom1_idx, atom2_idx] = upper
                restype_atom14_bond_upper_bound[restype, atom2_idx, atom1_idx] = upper

        # overwrite lower and upper bounds for bonds and angles
        for b in residue_bonds[resname] + residue_virtual_bonds[resname]:
            atom1_idx = atom_list.index(b.atom1_name)
            atom2_idx = atom_list.index(b.atom2_name)
            lower = b.length - bond_length_tolerance_factor * b.stddev
            upper = b.length + bond_length_tolerance_factor * b.stddev
            restype_atom14_bond_lower_bound[restype, atom1_idx, atom2_idx] = lower
            restype_atom14_bond_lower_bound[restype, atom2_idx, atom1_idx] = lower
            restype_atom14_bond_upper_bound[restype, atom1_idx, atom2_idx] = upper
            restype_atom14_bond_upper_bound[restype, atom2_idx, atom1_idx] = upper
            restype_atom14_bond_stddev[restype, atom1_idx, atom2_idx] = b.stddev
            restype_atom14_bond_stddev[restype, atom2_idx, atom1_idx] = b.stddev
    return {
        "lower_bound": restype_atom14_bond_lower_bound,  # shape (21,14,14)
        "upper_bound": restype_atom14_bond_upper_bound,  # shape (21,14,14)
        "stddev": restype_atom14_bond_stddev,  # shape (21,14,14)
    }


restype_atom14_ambiguous_atoms = np.zeros((21, 14), dtype=np.float32)
restype_atom14_ambiguous_atoms_swap_idx = np.tile(np.arange(14, dtype=int), (21, 1))


def _make_atom14_ambiguity_feats():
    for res, pairs in residue_atom_renaming_swaps.items():
        res_idx = restype_order[restype_3to1[res]]
        for atom1, atom2 in pairs.items():
            atom1_idx = restype_name_to_atom14_names[res].index(atom1)
            atom2_idx = restype_name_to_atom14_names[res].index(atom2)
            restype_atom14_ambiguous_atoms[res_idx, atom1_idx] = 1
            restype_atom14_ambiguous_atoms[res_idx, atom2_idx] = 1
            restype_atom14_ambiguous_atoms_swap_idx[res_idx, atom1_idx] = atom2_idx
            restype_atom14_ambiguous_atoms_swap_idx[res_idx, atom2_idx] = atom1_idx


_make_atom14_ambiguity_feats()


def aatype_to_str_sequence(aatype):
    return "".join([restypes_with_x[aatype[i]] for i in range(len(aatype))])


# NOTE(thayes): These are computed based on the average CA->C and CA->N norm from rigid_group_atom_positions
CA_TO_N_NORM = 1.4591
CA_TO_C_NORM = 1.5252


def _make_restype_atom37_to_atom14():
    """Map from atom37 to atom14 per residue type."""
    restype_atom37_to_atom14 = []  # mapping (restype, atom37) --> atom14
    for rt in restypes:
        atom_names = restype_name_to_atom14_names[restype_1to3[rt]]
        atom_name_to_idx14 = {name: i for i, name in enumerate(atom_names)}
        restype_atom37_to_atom14.append(
            [
                (atom_name_to_idx14[name] if name in atom_name_to_idx14 else 0)
                for name in atom_types
            ]
        )

    restype_atom37_to_atom14.append([0] * 37)
    restype_atom37_to_atom14 = np.array(restype_atom37_to_atom14, dtype=np.int32)
    return restype_atom37_to_atom14


def _make_restype_atom14_to_atom37():
    """Map from atom14 to atom37 per residue type."""
    restype_atom14_to_atom37 = []  # mapping (restype, atom14) --> atom37
    for rt in restypes:
        atom_names = restype_name_to_atom14_names[restype_1to3[rt]]
        restype_atom14_to_atom37.append(
            [(atom_order[name] if name else 0) for name in atom_names]
        )
    # Add dummy mapping for restype 'UNK'
    restype_atom14_to_atom37.append([0] * 14)
    restype_atom14_to_atom37 = np.array(restype_atom14_to_atom37, dtype=np.int32)
    return restype_atom14_to_atom37


RESTYPE_ATOM14_TO_ATOM37 = _make_restype_atom14_to_atom37()
RESTYPE_ATOM37_TO_ATOM14 = _make_restype_atom37_to_atom14()
CHAIN_BREAK_TOKEN = "|"