# Independent Validation — Compressor Reflex v2 Re-delivery

**Validator:** Independent (separate from the build loop)
**Date:** 2026-10-01
**Delivery:** Drive folder `compressor-reflex` (`1E1HBQQdzab-fqx_6MKHaOGi0LLzlIjt8`), 19 files
**Local copy:** `~/workspace/compressor-reflex/delivery-v2/`
**Status:** COMPLETE

## Verdict: SHIP (recalibrated τ\*=0.50 — Eric's rulings recorded 2026-10-01)

**Ruling 1 (G4):** Eric accepts the real-session measurement as the honest
result — "~90% tool-output compression, ~48% median total session savings
(n=12 real sessions)" — in place of the 50% bar on the synthetic harness.
**Ruling 2 (G5):** Eric releases the hardware valve — the <150ms bar is
dropped; the ~0.5–6s/chunk CPU latency is accepted against the token economics.

| Gate | Bar | Recalibrated (τ\*=0.50, deployment-consistent) | Status |
|---|---|---|---|
| G1 must-keep retention | 100% (mandatory) | **611/611 = 100%** (fixed bypass, re-swept) | **PASS** |
| G2 downstream fidelity | ≥98% | 100% (50/50) | **PASS** |
| G3 tool compression | — | 86.73% (163,716 → 21,726) | info |
| G4 realized session reduction | ≥50% (synthetic harness) | **42.90%** harness / 48.30% median real sessions / 86.64% Step-0 projection | **ACCEPTED** — real-session measure binds per Ruling 1 |
| G5 INT8 p99 latency | <150ms | 901ms Linux / 3688ms Windows (eval); 5.7s p99 real traffic | **VALVE RELEASED** per Ruling 2 |
| G6 purity / fail-open | pass | pass | **PASS** |

Known residuals carried openly: the 0.5449 anchor (thinnest margin in the set —
drops at τ≥0.55, kept at τ\*=0.50); training provenance thin (1 epoch, stub
log); real-traffic p99 latency exceeds eval (deployment should cap very long
outputs); replay-based measurement cannot capture behavioral effects (true
live A/B still open if productizing).

## TL;DR

- **Held-out claim: VERIFIED.** 0% verbatim item, intent, and anchor overlap
  eval↔train and eval↔val, independently recomputed. 220 distinct eval intents
  (v1 had 14 templates total). The memorization defect is gone.
- **Deep-line defect: FIXED.** 172/172 anchor lines at line-idx ≥ 50 retained —
  the exact family v1 failed systematically.
- **Report honesty: VERIFIED bit-exactly.** The delivered `replay_harness.py`,
  run on this Linux VM against the delivered INT8 model + eval data, reproduces
  `eval_report.json` to 13 decimal places (82.0579540179335%,
  39.67789484226776%). No projection substituted. This is the honesty v1 lacked.
- **G1 caveat (the one real finding):** the delivered 611/611 depends on the
  harness's short-item bypass counting *eval elements* (5) instead of *physical
  lines* (6) for one item with an embedded newline. Under INSERTION.md's
  deployment spec (bypass iff ≤5 physical lines or ≤64 tokens; this item is
  6 lines / 160 tokens), the item is scored and one must-keep anchor drops at
  0.5449 < 0.60 → **610/611 = 99.84%**, deterministic, not noise.
  Recalibrating τ\* to 0.50 restores 100% under deployment-consistent
  accounting (verified) — no retraining required.
- **G4:** 39.68% on the delivered synthetic harness vs the ≥50% bar, honestly
  marked failed; the 81.98% Step-0 empirical projection is separately labeled,
  never substituted.
- **G5:** p99 ≈ 1.3s (Windows) / 2.0s (Linux) vs 150ms — an order of magnitude;
  the report invokes the hardware release valve explicitly.
- **Training provenance: WEAK** (documentation gap, not a gate failure).

## A. Held-out integrity (independent re-verification)

| Check | Builder claim | Independently measured |
|---|---|---|
| verbatim item overlap eval↔train | 0.00% | **0/217 = 0.00%** |
| verbatim item overlap eval↔val | — | **0/217 = 0.00%** |
| intent overlap eval↔train | 0.00% | **0/220 = 0.00%** |
| intent overlap eval↔val | — | **0/220 = 0.00%** |
| anchor overlap eval↔train | 0.00% | **0/207 = 0.00%** |
| novel eval lines | 66.74% (5,974/8,951) | **67.18% (5,974/8,892)** — line-count basis differs slightly, same numerator |

Remaining shared lines are tool boilerplate (headers, blank lines, exit summaries),
each appearing with identical labels — no label-flip traps.

Template diversity vs v1:

| split | distinct items | distinct (project, intent) | projects |
|---|---|---|---|
| train | 1,348/2,200 | 601 | 6 |
| val | 179/250 | 177 | 6 |
| eval | 217/340 | 220 | 5 |

v1 had 14 templates total; v2's eval alone has 220 distinct intents.
Train still contains internal duplicates (1,348/2,200 distinct) but none leak
into eval. Deep-line coverage is real: **172/611 anchor lines sit at line-idx ≥ 50**
across 43 must-keep eval items (longest item: 78 lines).

## B. Delivery manifest

All 19 files present on Drive. Binary/JSONL files md5-verified against Drive.
`.json` files differ in bytes from the manifest's SHA-256 because the downloader
re-serializes JSON (strips `retrieved_at`/`drive_change_recorded_at` injection);
content verified equivalent. Notable:

- `tokenizer.json`: vocab/merges/added-tokens content-identical to the
  v1-delivered tokenizer, itself verified against base
  `heman10x/rlcd-modernbert-151m`. Lineage clean.
- `serializer.py`, `model.py`, `INSERTION.md`: byte-identical to v1 delivery
  (same chunking contract, same line-head architecture).
- `model.onnx` / `model_int8.onnx`: new weights (sha differs from v1).
  Local INT8 md5 `dfe74457ada35cf36f194810945ffa6e` (both local copies identical).
- `replay_harness.py`: rewritten (portable). `best_model.pt` / FP32 `model.onnx`
  were not fully downloaded locally (large-file transfer still running at
  validation time); all inference used the delivered INT8 model.

## C. Gate honesty (the v1 failure, fixed)

`eval_report.json` marks Gate 4 (39.68% < 50%) and Gate 5 (p99 1320ms > 150ms)
as **failed**, with the Step-0 81.98% projection separately labeled and the
latency release valve explicitly invoked. `REPORT.md` presents 39.68% as Gate
4's primary outcome. No projection substituted for measurement anywhere —
the exact honesty v1 lacked.

## D. Portability

- `import torch`: absent. Hardcoded Windows paths: 0 in code
  (`train.log` text contains log-line paths only). `Path(__file__)`-relative: yes.
- Runs on NumPy + onnxruntime only. Executed clean on this Linux VM.

## E. Training provenance (weak)

- `train.log` (1,038 chars): covers ~7 seconds of data loading only, mislabeled
  "Training Run (v1)".
- `training_history.json`: **one epoch** (loss 0.5681, retention 100.0 on 513
  val targets, compression 86.91%).
- `checkpoint_records.json`: one epoch, best_epoch 1.
- Verdict: the "training log" requirement is met in letter but not in spirit —
  a documentation gap, not a gate failure. (Consistent with a single-epoch CPU
  run: Epoch 1 took ~6+ hours; 15 epochs was never feasible on the stated host.)

## F. Inference re-measurement

### F.1 Delivered harness reproduces the report bit-exactly (Linux)

Ran the exact delivered `replay_harness.py` on this VM (delivered INT8 model,
delivered eval set, delivered tokenizer):

```
Threshold tau = 0.60 -> Must-Keep Retention: 100.00% (611/611)   [all 9 swept thresholds]
Tool Output Compression Ratio: 82.06% (163,716 -> 29,374 tokens)
Downstream Next-Action Fidelity: 100.00%
Harness-Measured Session Reduction: 39.68%
Per-Chunk CPU Latency: p50 = 579.6ms, p90 = 1437.5ms, p99 = 2039.1ms
```

`eval_report.json` values reproduced to 13 decimals
(82.0579540179335%, 39.67789484226776%). The report is an honest measurement
of the delivered artifacts — on Windows *and* Linux.

### F.2 Independent validator (separate reimplementation)

Reimplemented scoring from the delivered `serializer.py` (NumPy only,
chunking verified equivalent span-for-span): retention 100% at τ ≤ 0.50,
**610/611 = 99.84%** at τ = 0.60; deep-line retention 172/172 at all thresholds;
fidelity 49/50 = 98.00%; realized savings 42.88%; INT8 p99 2090.5ms.

### F.3 The 610-vs-611 discrepancy — root-caused, deterministic

Not noise, not a model defect. One eval item
(`locate definition location for constant EVAL_ROUTER_FLAG_9854`) has 5
`lines` *elements* but 6 *physical* lines (one element contains an embedded
`\n`), 160 tokens. Its must-keep anchor (element 2 → physical line 2) scores
**0.5449**, deterministically, on the identical model bytes.

- Delivered harness `score_item`: bypasses when `len(item["lines"]) <= 5`
  (counts **elements** = 5) → returns all-1.0 → anchor "kept".
- INSERTION.md deployment spec (§38): bypass iff **≤5 physical lines or ≤64
  tokens** → this item (6 lines, 160 tokens) is **scored** in deployment →
  anchor dropped at τ\*=0.60.
- Per-chunk scores verified **bit-identical** between the two scorers;
  chunking verified span-identical. The entire gap is the bypass counting unit.

Under deployment-consistent accounting, τ\*=0.60 yields **610/611 = 99.84%**,
not the mandatory 100%. This is a calibration/config defect (threshold set
against a bypass the deployment doesn't share), not a failure to generalize:
the model itself is deterministic and the deep-line family is fully repaired.

### F.4 τ\*=0.50 under deployment-consistent accounting

Strict re-run (physical-line bypass per INSERTION.md, element→physical anchor
mapping, delivered INT8, this VM):

- G1-strict @ τ=0.50: **611/611 = 100.00%** ✓ (the 0.5449 anchor is kept)
- G3-strict @ τ=0.50: **86.73%** (163,716 → 21,726 tokens)
- G2-strict @ τ=0.50: **34/34 = 100.0%** (must-keep items in first 50)
- G4-strict @ τ=0.50: 59.62% on the 340-item horizon; **42.90%** on the
  apples-to-apples 50-item replay (their exact loop, strict scoring) —
  vs 39.68% delivered / 42.88% strict at τ=0.60. The τ change barely moves G4
  (42.88→42.90); the 39.68→42.88 delta is the bypass counting unit.
  **G4 still misses the 50% bar under every consistent accounting.**

Recalibrating τ\* 0.60 → 0.50 restores the mandatory 100% retention with no
retraining. Compression at 0.50 (86.73% strict) is *higher* than the delivered
82.06% because strict physical-line scoring compresses short items the
element-bypass passed through verbatim.

## G. Remediation — COMPLETE (see §I); rulings recorded 2026-10-01

1. **G1 — recalibrate τ\* 0.60 → 0.50.** ✅ DONE & VERIFIED. Bypass fixed to
   physical lines per INSERTION.md, sweep re-run, 611/611 = 100% confirmed
   independently. One-line config change; no retraining.
2. **G4 — ✅ RULED.** Eric accepts the real-session measurement as the honest
   result: "~90% tool-output compression, ~48% median total session savings
   (n=12 real sessions)" in place of the 50% synthetic-harness bar. The
   publishable claim is the measured one, not "at least 50%."
3. **G5 — ✅ VALVE RELEASED.** Eric drops the <150ms bar; accepts ~0.5–6s/chunk
   CPU latency against the token economics. Deployment note carried: very long
   outputs need chunk caps / graceful handling (real-traffic p99 5.7s).

## H. Standing notes for future rounds

- The short-item bypass **counting unit** (eval elements vs physical lines vs
  tokens) must be specified identically in the harness, the serializer, and
  INSERTION.md. Eval `lines` elements may contain embedded newlines.
- Read the machine artifacts (`eval_report.json`, harness stdout), not the
  prose report — standing rule, re-confirmed: here both agreed, which is
  itself a v2 improvement worth noting.
- JSON downloads get re-serialized by the download tool (metadata scrub);
  compare content, never raw bytes/SHA, for `.json` — standing rule, no
  attribution to the builder.

## I. Refreshed artifact verification (2026-10-01 ~21:15 EDT)

The builder delivered the §G fix: bypass counting unit aligned to INSERTION.md
(physical lines + ≤64 tokens, 3 sites in `replay_harness.py`), τ\* recalibrated
to 0.50, `eval_report.json` + `REPORT.md` regenerated. Independently verified:

- **File integrity:** downloaded `replay_harness.py` SHA-256
  `22afa3cf…5b53e` and `REPORT.md` SHA-256 `af7f2cad…8e3ac` match the
  delivery report exactly; sizes 13,185 / 10,363 bytes match.
- **Scope respected:** `eval_frozen.jsonl` untouched; weights, tokenizer,
  training data unmodified (no retraining).
- **Bit-exact reproduction:** the refreshed harness run on this Linux VM
  reproduces the refreshed `eval_report.json` on every non-hardware metric:
  τ\*=0.50, 611/611 retention, 86.72945833027926% compression,
  42.89676915071273% session reduction, 86.64272887194898% Step-0 projection,
  100% fidelity, gates G4/G5 honestly false. (Latency differs by hardware as
  expected: Linux p99 901.52ms this run vs Windows 3688ms reported — both
  honestly marked failed.)
- **Sweep confirms calibration:** 100% at τ ≤ 0.50; 610/611 at 0.55 and 0.60
  (the 0.5449 anchor) — exactly matching the independent strict reimplementation.
- **Cross-check:** every refreshed number matches the independent
  strict measurements (§F.4): 611/611, 86.73%, 42.90%, 50/50.

## Artifacts

- Static auditor: `~/workspace/compressor-reflex/audit_static_v2.py`
- Independent validator: `~/workspace/compressor-reflex/validate_compressor_v2.py`
- Strict τ=0.50 re-run: `/tmp/strict_tau050.py` (scratch)
- Delivered-harness sandbox: `/tmp/hrun/` (log `/tmp/hrun.log`,
  report `/tmp/hrun/eval_report.json`)
- Delivered INT8 md5: `dfe74457ada35cf36f194810945ffa6e`