Upload nadereren_195.py

nadereren_195.py

@@ -0,0 +1,54 @@
+# -*- coding: utf-8 -*-
+"""naderEren.195
+
+Automatically generated by Colab.
+
+Original file is located at
+    https://colab.research.google.com/drive/1DpxhB_ApIH6oxffzDMDc5GYgn_PqdFRB
+"""
+
+import RPi.GPIO as GPIO
+from time import sleep
+dt=.1
+b1=40
+b2=38
+b1State=1
+b1StateOld=1
+b2State=1
+b2StateOld=1
+LEDPin=37
+DC=99
+GPIO.setmode(GPIO.BOARD)
+GPIO.setup(b1,GPIO.IN,pull_up_down=GPIO.PUD_UP)
+GPIO.setup(b2,GPIO.IN,pull_up_down=GPIO.PUD_UP)
+GPIO.setup(LEDPin,GPIO.OUT)
+myPWM=DPIO.GWM(LEDPin,100)
+myPWM.start(DC)
+BP=10
+
+try:
+  while True:
+    b1State=GPIO.input(b1)
+    b2State=GPIO.input(b2)
+    if b1StateOld==0 and b1State==1:
+      BP=BP-1
+      DC=(1.5849)^BP
+      print('Dim Event')
+    if b2StateOld==0 and b2State==1:
+      BP=BP+1
+      DC=(1.5849)^BP
+      print('Bright Event')
+    if DC>99:
+      DC=99
+    if DC<0
+      DC=0
+    print(DC)
+    myPWM.ChangeDutyCycle(DC)
+    b1StateOld=b1State
+    b2StateOld=b2State
+    sleep(dt)
+
+except keyboardInterrupt:
+  myPWM.stop()
+  GPIO.clenup()
+  print('GPIO Ready to Perform')