File size: 2,056 Bytes
0c19b9d | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 | ```python
mapping = {
"16x risers": "unknown",
"16x55nm chips": "unknown",
"175 available for shipment": "unknown",
"176 chips": "unknown",
"176-264 volt psu's": "unknown",
"18 awg per cable": "unknown",
"18 card 7970 rig": "7970",
"18 chips": "unknown",
"18 gauge awg 12v + ins": "unknown",
"18 gauge computer cable": "unknown",
"18 gauge power cords": "unknown",
"18 pin plug": "unknown",
"18 pins cables": "unknown",
"18\" cables": "unknown",
"18-hand mule": "unknown",
"18.000 btu/h hvac": "unknown",
"180 gh/s antminer": "antminer s1", # Assuming closest match based on hash rate.
"1800mh/s": "unknown",
"1800rpm quiet fans": "unknown",
"1800w power supply": "unknown",
"180gh ants": "antminer s1", # Assuming typo and closest match based on hash rate.
"1875 watts socket": "unknown",
"188 buck sam's club shop workbench": "unknown",
"18awg (0.824mm2) cable": "unknown",
"18awg cables": "unknown",
"18awg pcie y-splitters": "unknown",
"18awg standard wire": "unknown",
"18awg thermostat wire": "unknown",
"18ga wire": "unknown",
"18gh board": "unknown",
"18gh/s unit": "unknown",
"18guage wires": "unknown",
"18pin connectors": "unknown",
"19 pcie mobo": "unknown",
"19 port hub": "unknown",
"19\" rack box": "unknown",
"19\" rackmount enclosure": "unknown",
"19-porter from dipo electronic": "unknown",
"192 cfm delta pwm fan": "unknown",
"192 ghs miner": "unknown", # No direct match, could be a general reference to a miner's hash rate.
"192.168.0.1 router": "unknown",
"192.168.1.8": "unknown",
"1a adapter": "unknown",
"1a mains to usb adapter": "unknown",
"1a921": "unknown",
"1gb kingston": "unknown",
"1gh rig": "unknown",
"1gh/s setup": "unknown",
"1k ohm resistor": "unknown",
"1kw 28nm miner": "unknown", # No direct match, could refer to a miner's power consumption or efficiency.
}
``` |