; generated by PrusaSlicer 2.9.2 on 2026-01-07 at 09:52:12 UTC

; TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.

; external perimeters extrusion width = 0.42mm
; perimeters extrusion width = 0.44mm
; infill extrusion width = 0.44mm
; solid infill extrusion width = 0.44mm
; top infill extrusion width = 0.44mm
; first layer extrusion width = 0.56mm

;TYPE:Custom
G21 ; set units to millimeters
G90 ; use absolute coordinates
M190 S60 ; wait for bed temperature to be reached
M104 S210 ; set temperature
G28 ; home all axes
G0 F600 Z5.0
G0 X1.0 Y1.0 F7200
M109 S210 ; wait for temperature to be reached
M82 ; use absolute distances for extrusion
G92 E0
G1 F12000
; purging extruder
G0 F6000 X10 Y1 Z0.3
G92 E0
G1 F1500 X50 E4.7   ; purge line start
G1 F1500 X90 E14.1  ; purge line end
G92 E0
; done purging extruder
M83 ; use relative distances for extrusion
; start of print
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M107
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
G1 E-.75 F3000
G1 Z.2 F900
G1 X167.676 Y168.117 F18000
G1 Z.2 F900
G1 E.75 F1800
M204 S4000
;TYPE:Skirt/Brim
;WIDTH:0.56
G1 F1562
G1 X169.56 Y166.341 E.11132
G1 X171.894 Y165.22 E.11133
G1 X174.332 Y164.86 E.10596
G1 X175.933 Y164.86 E.06884
G1 X178.491 Y165.257 E.1113
G1 X180.808 Y166.413 E.11133
G1 X183.247 Y169.099 E.15599
G1 X184.341 Y171.008 E.0946
G1 X185.267 Y173.426 E.11133
G1 X185.417 Y176.01 E.11129
G1 X184.774 Y178.519 E.11136
G1 X183.401 Y180.713 E.11128
G1 X180.962 Y182.652 E.13397
G1 X179.871 Y183.228 E.05304
G1 X177.423 Y184.071 E.11132
G1 X174.835 Y184.132 E.1113
G1 X172.35 Y183.403 E.11135
G1 X170.204 Y181.955 E.11131
G1 X168.852 Y180.344 E.09043
G1 X167.248 Y177.858 E.1272
G1 X166.196 Y175.493 E.11129
G1 X165.911 Y172.919 E.11135
G1 X166.42 Y170.381 E.1113
G1 X167.647 Y168.169 E.10876
G1 X168.123 Y168.455 F18000
G1 F1562
G1 X168.282 Y168.19 E.01329
G1 X170.182 Y166.552 E.10786
G1 X172.499 Y165.592 E.10783
G1 X174.332 Y165.377 E.07935
G1 X175.933 Y165.377 E.06884
G1 X178.409 Y165.774 E.10782
G1 X180.637 Y166.927 E.10786
G1 X182.798 Y169.356 E.13978
G1 X183.892 Y171.265 E.0946
G1 X184.778 Y173.611 E.10782
G1 X184.885 Y176.117 E.10784
G1 X184.203 Y178.53 E.10781
G1 X182.8 Y180.609 E.10784
G1 X180.721 Y182.195 E.11243
G1 X179.63 Y182.771 E.05304
G1 X177.254 Y183.576 E.10786
G1 X174.747 Y183.597 E.10779
G1 X172.358 Y182.832 E.10785
G1 X170.329 Y181.358 E.10783
G1 X169.286 Y180.063 E.07149
G1 X167.683 Y177.578 E.12714
G1 X166.675 Y175.281 E.10785
G1 X166.436 Y172.785 E.10781
G1 X166.99 Y170.339 E.10783
G1 X168.092 Y168.506 E.09196
G1 X168.548 Y168.805 F18000
G1 F1562
G1 X168.892 Y168.279 E.02702
G1 X170.804 Y166.789 E.10422
G1 X173.095 Y165.998 E.10421
G1 X174.332 Y165.894 E.05337
G1 X175.933 Y165.894 E.06884
G1 X178.324 Y166.291 E.10421
G1 X180.458 Y167.44 E.10421
G1 X182.35 Y169.613 E.12388
G1 X183.443 Y171.522 E.09458
G1 X184.287 Y173.794 E.10421
G1 X184.351 Y176.218 E.10426
G1 X183.628 Y178.531 E.10419
G1 X182.195 Y180.487 E.10425
G1 X180.48 Y181.738 E.09127
G1 X179.388 Y182.314 E.05308
G1 X177.088 Y183.079 E.10422
G1 X174.664 Y183.059 E.10422
G1 X172.377 Y182.257 E.1042
G1 X170.472 Y180.758 E.10422
G1 X169.721 Y179.783 E.05291
G1 X168.118 Y177.298 E.12714
G1 X167.155 Y175.073 E.10424
G1 X166.964 Y172.656 E.10424
G1 X167.564 Y170.308 E.1042
G1 X168.515 Y168.855 E.07466
G1 X168.948 Y169.166 F18000
G1 F1562
G1 X169.505 Y168.389 E.0411
G1 X171.425 Y167.055 E.10052
G1 X174.332 Y166.411 E.12802
G1 X175.933 Y166.411 E.06884
G1 X178.236 Y166.808 E.10048
G1 X180.273 Y167.953 E.10047
G1 X181.901 Y169.87 E.10813
G1 X182.995 Y171.779 E.0946
G1 X183.795 Y173.975 E.10049
G1 X183.814 Y176.312 E.10048
G1 X183.049 Y178.521 E.10051
G1 X181.589 Y180.345 E.10045
G1 X180.238 Y181.28 E.07064
G1 X179.147 Y181.857 E.05306
G1 X176.925 Y182.581 E.10048
G1 X174.588 Y182.519 E.10052
G1 X172.407 Y181.679 E.10049
G1 X170.155 Y179.503 E.13464
G1 X168.552 Y177.017 E.12718
G1 X167.637 Y174.867 E.10046
G1 X167.496 Y172.534 E.10049
G1 X168.143 Y170.288 E.10049
G1 X168.913 Y169.215 E.05678
G1 X169.318 Y169.535 F18000
G1 F1562
G1 X170.122 Y168.52 E.05567
G1 X172.043 Y167.354 E.09662
G1 X174.332 Y166.928 E.10011
G1 X175.933 Y166.928 E.06884
G1 X178.144 Y167.325 E.09658
G1 X180.08 Y168.466 E.09662
G1 X181.452 Y170.127 E.09263
G1 X182.546 Y172.036 E.0946
G1 X183.301 Y174.152 E.0966
G1 X183.273 Y176.399 E.09662
G1 X182.466 Y178.496 E.09661
G1 X180.98 Y180.182 E.09663
G1 X179.997 Y180.823 E.05046
G1 X178.905 Y181.399 E.05308
G1 X176.764 Y182.081 E.09661
G1 X174.52 Y181.976 E.09659
G1 X172.452 Y181.097 E.09661
G1 X170.59 Y179.222 E.11361
G1 X168.987 Y176.737 E.12714
G1 X168.121 Y174.663 E.09663
G1 X168.031 Y172.418 E.0966
G1 X168.727 Y170.282 E.09659
G1 X169.281 Y169.582 E.03838
G1 X169.652 Y169.911 F18000
G1 F1562
G1 X170.742 Y168.678 E.07076
G1 X172.655 Y167.691 E.09255
G1 X174.332 Y167.445 E.07287
G1 X175.933 Y167.445 E.06884
G1 X178.049 Y167.842 E.09257
G1 X179.878 Y168.977 E.09255
G1 X181.004 Y170.384 E.07748
G1 X182.097 Y172.293 E.09458
G1 X182.805 Y174.326 E.09256
G1 X182.729 Y176.478 E.09258
G1 X181.878 Y178.456 E.09258
G1 X179.755 Y180.366 E.12278
G1 X178.664 Y180.942 E.05304
G1 X176.608 Y181.58 E.09256
G1 X174.46 Y181.429 E.09258
G1 X172.512 Y180.511 E.09259
G1 X171.024 Y178.942 E.09297
G1 X169.421 Y176.457 E.12714
G1 X168.607 Y174.463 E.0926
G1 X168.57 Y172.311 E.09254
G1 X169.316 Y170.291 E.09258
G1 X169.612 Y169.956 E.01922
G1 X169.943 Y170.286 F18000
G1 F1562
G1 X171.363 Y168.866 E.08634
G1 X173.258 Y168.071 E.08836
G1 X174.332 Y167.962 E.04641
G1 X175.933 Y167.962 E.06884
G1 X177.949 Y168.358 E.08834
G1 X179.665 Y169.488 E.08834
G1 X180.555 Y170.641 E.06262
G1 X181.649 Y172.55 E.0946
G1 X182.307 Y174.497 E.08836
G1 X182.18 Y176.547 E.08831
G1 X181.286 Y178.397 E.08834
G1 X179.514 Y179.909 E.10015
G1 X178.423 Y180.485 E.05304
G1 X176.455 Y181.076 E.08835
G1 X174.41 Y180.878 E.08834
G1 X172.592 Y179.921 E.08833
G1 X171.459 Y178.662 E.07282
G1 X169.856 Y176.176 E.12718
G1 X169.096 Y174.267 E.08834
G1 X169.115 Y172.213 E.08832
G1 X169.905 Y170.332 E.08772
G1 X170.411 Y170.575 F18000
G1 F1562
G1 X170.511 Y170.368 E.00988
G1 X171.986 Y169.09 E.08391
G1 X174.332 Y168.479 E.10423
G1 X175.933 Y168.479 E.06884
G1 X177.844 Y168.875 E.08391
G1 X179.44 Y169.997 E.08388
G1 X180.106 Y170.898 E.04817
G1 X181.2 Y172.807 E.0946
G1 X181.806 Y174.662 E.0839
G1 X181.626 Y176.605 E.0839
G1 X180.689 Y178.316 E.08387
G1 X179.272 Y179.451 E.07806
G1 X178.181 Y180.028 E.05306
G1 X176.307 Y180.57 E.08388
G1 X174.371 Y180.323 E.08391
G1 X172.693 Y179.327 E.0839
G1 X171.893 Y178.382 E.05323
G1 X170.29 Y175.896 E.12718
G1 X169.587 Y174.076 E.08389
G1 X169.665 Y172.126 E.08391
G1 X170.385 Y170.629 E.07142
G1 X170.865 Y170.897 F18000
G1 F1562
G1 X171.118 Y170.443 E.02235
G1 X172.607 Y169.358 E.07921
G1 X174.332 Y168.996 E.07578
G1 X175.933 Y168.996 E.06884
G1 X177.732 Y169.392 E.0792
G1 X179.658 Y171.155 E.11226
G1 X180.751 Y173.064 E.09458
G1 X181.303 Y174.822 E.07922
G1 X181.067 Y176.649 E.07921
G1 X180.086 Y178.209 E.07923
G1 X179.031 Y178.994 E.05654
G1 X177.94 Y179.57 E.05304
G1 X176.164 Y180.061 E.07922
G1 X174.346 Y179.762 E.07922
G1 X172.328 Y178.101 E.11238
G1 X170.725 Y175.616 E.12714
G1 X170.082 Y173.889 E.07923
G1 X170.221 Y172.052 E.07921
G1 X170.836 Y170.949 E.0543
G1 X171.28 Y171.24 F18000
G1 F1562
G1 X171.732 Y170.551 E.03543
G1 X173.222 Y169.68 E.07421
G1 X174.332 Y169.513 E.04826
G1 X175.933 Y169.513 E.06884
G1 X177.613 Y169.908 E.0742
G1 X179.209 Y171.412 E.09429
G1 X180.303 Y173.321 E.0946
G1 X180.796 Y174.976 E.07425
G1 X180.501 Y176.677 E.07423
G1 X178.79 Y178.537 E.10866
G1 X177.698 Y179.113 E.05308
G1 X176.028 Y179.549 E.07421
G1 X174.338 Y179.195 E.07424
G1 X172.762 Y177.821 E.0899
G1 X171.159 Y175.336 E.12714
G1 X170.58 Y173.709 E.07425
G1 X170.785 Y171.995 E.07422
G1 X171.247 Y171.291 E.0362
G1 X171.64 Y171.601 F18000
G1 F1562
G1 X172.351 Y170.702 E.04928
G1 X174.332 Y170.03 E.08994
G1 X175.933 Y170.03 E.06884
G1 X177.486 Y170.424 E.06889
G1 X178.76 Y171.669 E.07659
G1 X179.854 Y173.578 E.0946
G1 X180.284 Y175.122 E.06891
G1 X179.927 Y176.683 E.06885
G1 X178.548 Y178.08 E.0844
G1 X177.457 Y178.656 E.05304
G1 X175.9 Y179.033 E.06888
G1 X174.351 Y178.622 E.0689
G1 X173.197 Y177.541 E.06799
G1 X171.594 Y175.055 E.12718
G1 X171.083 Y173.537 E.06887
G1 X171.358 Y171.958 E.06891
G1 X171.603 Y171.648 E.01699
G1 E-.75 F3000
G1 X174.992 Y173.611 F18000
G1 E.75 F1800
;TYPE:External perimeter
;WIDTH:0.643775
G1 F1562
G1 X175.746 Y173.611 E.03767
G1 X176.017 Y174.069 E.02659
;WIDTH:0.629109
G1 X176.584 Y175.052 E.05531
;WIDTH:0.623614
G1 X176.342 Y175.159 E.01278
G1 X176.058 Y175.331 E.01603
G1 X175.882 Y174.991 E.01849
;WIDTH:0.643775
G1 X175.325 Y174.082 E.05326
G1 X175.023 Y173.657 E.02605
G1 X175.42 Y173.607 F18000
M106 S255
;LAYER_CHANGE
;Z:0.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.4
G92 E0

G1 Z.4 F900
;AFTER_LAYER_CHANGE
;0.4
M104 S205 ; set temperature
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:0.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.6
G92 E0

G1 Z.6 F900
;AFTER_LAYER_CHANGE
;0.6
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.8
G92 E0

G1 Z.8 F900
;AFTER_LAYER_CHANGE
;0.8
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1
G92 E0

G1 Z1 F900
;AFTER_LAYER_CHANGE
;1
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:1.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.2
G92 E0

G1 Z1.2 F900
;AFTER_LAYER_CHANGE
;1.2
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.4
G92 E0

G1 Z1.4 F900
;AFTER_LAYER_CHANGE
;1.4
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:1.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.6
G92 E0

G1 Z1.6 F900
;AFTER_LAYER_CHANGE
;1.6
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:1.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.8
G92 E0

G1 Z1.8 F900
;AFTER_LAYER_CHANGE
;1.8
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2
G92 E0

G1 Z2 F900
;AFTER_LAYER_CHANGE
;2
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:2.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.2
G92 E0

G1 Z2.2 F900
;AFTER_LAYER_CHANGE
;2.2
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.45015
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:2.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.4
G92 E0

G1 Z2.4 F900
;AFTER_LAYER_CHANGE
;2.4
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:2.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.6
G92 E0

G1 Z2.6 F900
;AFTER_LAYER_CHANGE
;2.6
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490472
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450154
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:2.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.8
G92 E0

G1 Z2.8 F900
;AFTER_LAYER_CHANGE
;2.8
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450152
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:3
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3
G92 E0

G1 Z3 F900
;AFTER_LAYER_CHANGE
;3
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450154
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.2
G92 E0

G1 Z3.2 F900
;AFTER_LAYER_CHANGE
;3.2
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490472
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450154
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:3.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.4
G92 E0

G1 Z3.4 F900
;AFTER_LAYER_CHANGE
;3.4
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490474
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450154
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:3.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.6
G92 E0

G1 Z3.6 F900
;AFTER_LAYER_CHANGE
;3.6
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490478
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450156
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:3.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.8
G92 E0

G1 Z3.8 F900
;AFTER_LAYER_CHANGE
;3.8
G1 X175.572 Y173.911 F18000
;TYPE:Perimeter
;WIDTH:0.490464
G1 F900
G1 X176.13 Y174.842 E.04039
;WIDTH:0.450148
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.233 Y174.146 E.03316
G1 X174.761 Y173.499 E.02511
G1 X175.811 Y173.499 E.03292
G1 X176.728 Y175.1 E.05785
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
;LAYER_CHANGE
;Z:4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;4
G92 E0

G1 Z4 F900
;AFTER_LAYER_CHANGE
;4
G1 X175.575 Y173.915 F18000
;TYPE:Perimeter
;WIDTH:0.49007
G1 F900
G1 X176.13 Y174.842 E.04017
;WIDTH:0.450158
G1 X176.173 Y174.919 E.00299
G1 X176.02 Y175.475 F18000
;TYPE:External perimeter
;WIDTH:0.419999
G1 F900
G1 X176.018 Y175.476 E.00007
G1 X175.795 Y175.042 E.0153
G1 X175.236 Y174.15 E.03301
G1 X174.762 Y173.5 E.02522
G1 X175.814 Y173.504 E.03298
G1 X176.728 Y175.1 E.05767
G1 X176.383 Y175.252 E.01182
G1 X176.071 Y175.443 E.01147
G1 X175.835 Y175.121 F18000
G1 E-.75 F3000
M107
;TYPE:Custom
; end of print
M82 ; use absolute distances for extrusion
G92 E0
M104 S0 ; turn off temperature
M140 S0
G90 ; absolute coordinates
G0 Z310 F6000 ; move head to max height
G0 X350 Y350 F6000 ; move head to rear-right
M84     ; disable motors
M107    ; fan off
; objects_info = {"objects":[]}
; filament used [mm] = 39.75
; filament used [cm3] = 0.10
; filament used [g] = 0.12
; filament cost = 0.00
; total filament used [g] = 0.12
; total filament cost = 0.00
; total filament used for wipe tower [g] = 0.00
; estimated printing time (normal mode) = 1m 3s
; estimated first layer printing time (normal mode) = 25s

; prusaslicer_config = begin
; arc_fitting = disabled
; autoemit_temperature_commands = 0
; automatic_extrusion_widths = 0
; automatic_infill_combination = 0
; automatic_infill_combination_max_layer_height = 100%
; avoid_crossing_curled_overhangs = 0
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,350x0,350x350,0x350
; bed_temperature = 55
; bed_temperature_extruder = 0
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
; between_objects_gcode = 
; binary_gcode = 0
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 5
; bottom_solid_min_thickness = 0
; bridge_acceleration = 4000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.8
; bridge_speed = 60
; brim_separation = 0
; brim_type = outer_only
; brim_width = 0
; chamber_minimal_temperature = 0
; chamber_temperature = 0
; color_change_gcode = M600
; colorprint_heights = 
; compatible_printers_condition_cummulative = "printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4";"printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 4000
; default_filament_profile = "Basic PLA @VORON"
; default_print_profile = 0.15mm 0.4nozzle
; deretract_speed = 30
; disable_fan_first_layers = 1
; dont_support_bridges = 1
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0.1
; enable_dynamic_fan_speeds = 0
; enable_dynamic_overhang_speeds = 0
; end_filament_gcode = ""
; end_gcode = ; end of print\nM82 ; use absolute distances for extrusion\nG92 E0\nM104 S0 ; turn off temperature\nM140 S0\nG90 ; absolute coordinates\nG0 Z310 F6000 ; move head to max height\nG0 X350 Y350 F6000 ; move head to rear-right\nM84     ; disable motors\nM107    ; fan off
; ensure_vertical_shell_thickness = enabled
; external_perimeter_acceleration = 0
; external_perimeter_extrusion_width = 0.42
; external_perimeter_speed = 40
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extra_perimeters_on_overhangs = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 70
; extruder_colour = #FFE3CA
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.44
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_abrasive = 0
; filament_colour = #FF3232
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 20
; filament_density = 1.24
; filament_deretract_speed = nil
; filament_diameter = 1.75
; filament_infill_max_crossing_speed = 0
; filament_infill_max_speed = 0
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 13
; filament_minimal_purge_on_wipe_tower = 15
; filament_multitool_ramming = 0
; filament_multitool_ramming_flow = 10
; filament_multitool_ramming_volume = 10
; filament_notes = ""
; filament_purge_multiplier = 100%
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_before_travel = nil
; filament_retract_before_wipe = nil
; filament_retract_layer_change = nil
; filament_retract_length = nil
; filament_retract_length_toolchange = nil
; filament_retract_lift = nil
; filament_retract_lift_above = nil
; filament_retract_lift_below = nil
; filament_retract_restart_extra = nil
; filament_retract_restart_extra_toolchange = nil
; filament_retract_speed = nil
; filament_seam_gap_distance = nil
; filament_settings_id = "Basic PLA @VORON"
; filament_shrinkage_compensation_xy = 0%
; filament_shrinkage_compensation_z = 0%
; filament_soluble = 0
; filament_spool_weight = 0
; filament_stamping_distance = 0
; filament_stamping_loading_speed = 20
; filament_toolchange_delay = 0
; filament_travel_lift_before_obstacle = nil
; filament_travel_max_lift = nil
; filament_travel_ramping_lift = nil
; filament_travel_slope = nil
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; filament_wipe = nil
; fill_angle = 86
; fill_density = 12%
; fill_pattern = line
; first_layer_acceleration = 4000
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 55
; first_layer_extrusion_width = 0.56
; first_layer_height = 0.2
; first_layer_infill_speed = 0
; first_layer_speed = 30
; first_layer_speed_over_raft = 30
; first_layer_temperature = 215
; full_fan_speed_layer = 0
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = klipper
; gcode_label_objects = disabled
; gcode_resolution = 0.0125
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; host_type = prusalink
; idle_temperature = nil
; infill_acceleration = 4000
; infill_anchor = 0
; infill_anchor_max = 50
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.44
; infill_first = 0
; infill_overlap = 20%
; infill_speed = 125
; interface_shells = 0
; interlocking_beam = 0
; interlocking_beam_layer_count = 2
; interlocking_beam_width = 0.8
; interlocking_boundary_avoidance = 2
; interlocking_depth = 2
; interlocking_orientation = 22.5
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_limits_usage = ignore
; machine_max_acceleration_e = 10000
; machine_max_acceleration_extruding = 1500
; machine_max_acceleration_retracting = 1500
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 9000
; machine_max_acceleration_y = 9000
; machine_max_acceleration_z = 500
; machine_max_feedrate_e = 120
; machine_max_feedrate_x = 500
; machine_max_feedrate_y = 500
; machine_max_feedrate_z = 12
; machine_max_jerk_e = 2.5
; machine_max_jerk_x = 10
; machine_max_jerk_y = 10
; machine_max_jerk_z = 0.2
; machine_min_extruding_rate = 0
; machine_min_travel_rate = 0
; max_fan_speed = 100
; max_layer_height = 0.3
; max_print_height = 310
; max_print_speed = 125
; max_volumetric_extrusion_rate_slope_negative = 0
; max_volumetric_extrusion_rate_slope_positive = 0
; max_volumetric_speed = 0
; min_bead_width = 85%
; min_fan_speed = 100
; min_feature_size = 25%
; min_layer_height = 0.0375
; min_print_speed = 15
; min_skirt_length = 20
; mmu_segmented_region_interlocking_depth = 0
; mmu_segmented_region_max_width = 0
; multimaterial_purging = 140
; notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
; nozzle_diameter = 0.4
; nozzle_high_flow = 0
; only_one_perimeter_first_layer = 0
; only_retract_when_crossing_perimeters = 1
; ooze_prevention = 0
; output_filename_format = [input_filename_base].gcode
; over_bridge_speed = 0
; overhang_fan_speed_0 = 0
; overhang_fan_speed_1 = 0
; overhang_fan_speed_2 = 0
; overhang_fan_speed_3 = 0
; overhang_speed_0 = 15
; overhang_speed_1 = 15
; overhang_speed_2 = 20
; overhang_speed_3 = 25
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 4000
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.44
; perimeter_generator = arachne
; perimeter_speed = 100
; perimeters = 3
; physical_printer_settings_id = 
; post_process = 
; prefer_clockwise_movements = 0
; print_settings_id = 0.2mm 0.4nozzle V2
; printer_model = Voron_v2_350_afterburner
; printer_notes = Unoffical profile.\nE3DV6
; printer_settings_id = Voron_v2_350_afterburner 0.4 nozzle
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_contact_distance = 0.1
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 0
; resolution = 0
; retract_before_travel = 3
; retract_before_wipe = 0%
; retract_layer_change = 0
; retract_length = 0.75
; retract_length_toolchange = 10
; retract_lift = 0.4
; retract_lift_above = 0.2
; retract_lift_below = 500
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 50
; scarf_seam_entire_loop = 0
; scarf_seam_length = 20
; scarf_seam_max_segment_length = 1
; scarf_seam_on_inner_perimeters = 0
; scarf_seam_only_on_smooth = 1
; scarf_seam_placement = nowhere
; scarf_seam_start_height = 0%
; seam_gap_distance = 15%
; seam_position = nearest
; silent_mode = 0
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 3
; skirt_height = 1
; skirts = 3
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 20
; small_perimeter_speed = 40
; solid_infill_acceleration = 4000
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.44
; solid_infill_speed = 120
; spiral_vase = 0
; staggered_inner_seams = 0
; standby_temperature_delta = -5
; start_filament_gcode = ""
; start_gcode = G21 ; set units to millimeters\nG90 ; use absolute coordinates\nM190 S60 ; wait for bed temperature to be reached\nM104 S210 ; set temperature\nG28 ; home all axes\nG0 F600 Z5.0\nG0 X1.0 Y1.0 F7200\nM109 S210 ; wait for temperature to be reached\nM82 ; use absolute distances for extrusion\nG92 E0\nG1 F12000\n; purging extruder\nG0 F6000 X10 Y1 Z0.3\nG92 E0\nG1 F1500 X50 E4.7   ; purge line start\nG1 F1500 X90 E14.1  ; purge line end\nG92 E0\n; done purging extruder\nM83 ; use relative distances for extrusion\n; start of print
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = -1
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.15
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.44
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 1
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 70
; support_material_pattern = rectilinear
; support_material_spacing = 1
; support_material_speed = 90
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 30
; support_material_with_sheath = 0
; support_material_xy_spacing = 0.6
; support_tree_angle = 40
; support_tree_angle_slow = 25
; support_tree_branch_diameter = 2
; support_tree_branch_diameter_angle = 5
; support_tree_branch_diameter_double_wall = 3
; support_tree_branch_distance = 1
; support_tree_tip_diameter = 0.8
; support_tree_top_rate = 15%
; temperature = 205
; template_custom_gcode = 
; thick_bridges = 1
; thin_walls = 0
; thumbnails = 64x64/PNG, 400x300/PNG
; thumbnails_format = PNG
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.44
; top_one_perimeter_type = none
; top_solid_infill_acceleration = 0
; top_solid_infill_speed = 50
; top_solid_layers = 6
; top_solid_min_thickness = 0
; travel_acceleration = 4000
; travel_lift_before_obstacle = 0
; travel_max_lift = 0
; travel_ramping_lift = 0
; travel_slope = 0
; travel_speed = 300
; travel_speed_z = 15
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wall_distribution_count = 1
; wall_transition_angle = 10
; wall_transition_filter_deviation = 25%
; wall_transition_length = 100%
; wipe = 0
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_acceleration = 0
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_cone_angle = 0
; wipe_tower_extra_flow = 100%
; wipe_tower_extra_spacing = 100%
; wipe_tower_extruder = 0
; wipe_tower_no_sparse_layers = 0
; wipe_tower_width = 60
; wiping_volumes_matrix = 0
; wiping_volumes_use_custom_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end