| Volume One, Issue Four, Phile #3 of 11 | |
| False Identification | |
| By | |
| Forest Ranger | |
| The objective of this file is to teach one to change his or her current | |
| drivers license to make one 21, without taking apart the drivers license | |
| itself. This will be taught to you in a quick, inexpensive, easy to understand | |
| process. The materials used are laminated sheets (easily obtainable from a | |
| school supply store for around a dollar to two dollars for a number of sheets), | |
| pair of good scissors, and a copy machine. | |
| The first step in the process calls for the copy machine (a copy machine at | |
| the supermarket works good). Make two copies of your drivers license. Take one | |
| copy and search for a digit on one of the copies that will change the current | |
| year on your license to one that will change your age (21). Once you have found | |
| the digit on one copy cut it out so just the digit is there (a square segment | |
| with a little trim around the edges is a good cut). Then take the other copy | |
| and cut out the current last digit of the year you were born in basically the | |
| same shape as the last. Put the cut out digit under the copy that you had cut | |
| out your current digit of the year you were born. Now having a little trim | |
| around the cut out digit from the first copy will assist you when lining it up | |
| under the second copy when you put it in the copy machine. Now that you have | |
| the new digit from the first copy sitting underneath but showing on the second | |
| copy place it in the copy machine and make a copy so that you will have an | |
| original of the new base part of the license. | |
| Now since most copy machines are black and white you will have to cut away | |
| the states license on the top of the license (e.g. Illinois License). Now place | |
| the new base of the license with the cut away license name over the old base of | |
| the current license. The new base might not match up like it should but line it | |
| up as a good as possible. Now place a piece of the laminated sheet cut out to | |
| configure the license on top of the new base. Cut away any overlaps of | |
| laminated paper and iron over the license with Mom's good old iron. | |
| Notes: This process has been proved to work. If you are the type of person | |
| that looks very young then do not bother to make an ID. You will just get | |
| caught and get into a lot of trouble. Also, be very careful at well known bars | |
| and over 21 hang out spots. The employees at these places tend to flash a flash | |
| light underneath the card to see if it is transparent. It is supposed to be. | |
| With this process it is a little hard to see through the ID so be careful with | |
| it if you do go to a place such as this. If you are pulled over by the police | |
| then take a corner of the license and rip. It will not affect your original | |
| license though it maybe a little sticky but, that should not be to big of a | |
| problem. If any bubbling occurs just iron over it and l | |