Add SO101.

.gitattributes

@@ -25,7 +25,6 @@
 *.pth filter=lfs diff=lfs merge=lfs -text
 *.rar filter=lfs diff=lfs merge=lfs -text
 *.safetensors filter=lfs diff=lfs merge=lfs -text
-saved_model/**/* filter=lfs diff=lfs merge=lfs -text
 *.tar.* filter=lfs diff=lfs merge=lfs -text
 *.tar filter=lfs diff=lfs merge=lfs -text
 *.tflite filter=lfs diff=lfs merge=lfs -text
@@ -57,7 +56,10 @@ saved_model/**/* filter=lfs diff=lfs merge=lfs -text
 # Video files - compressed
 *.mp4 filter=lfs diff=lfs merge=lfs -text
 *.webm filter=lfs diff=lfs merge=lfs -text
+# Meshes - compressed
 *.obj filter=lfs diff=lfs merge=lfs -text
 *.glb filter=lfs diff=lfs merge=lfs -text
 *.usdz filter=lfs diff=lfs merge=lfs -text
-usd/franka_mocap_teleop/table_scene.usd filter=lfs diff=lfs merge=lfs -text
+*.stl filter=lfs diff=lfs merge=lfs -text
+*.usd filter=lfs diff=lfs merge=lfs -text
+

SO101/README.md

@@ -0,0 +1,35 @@
+# SO101 Robot - URDF and MuJoCo Description
+
+This repository contains the URDF and MuJoCo (MJCF) files for the SO101 robot.
+
+## Overview
+
+- The robot model files were generated using the [onshape-to-robot](https://github.com/Rhoban/onshape-to-robot) plugin from a CAD model designed in Onshape.
+- The generated URDFs were modified to allow meshes with relative paths instead of `package://...`.
+- Base collision meshes were removed due to problematic collision behavior during simulation and planning.
+
+## Calibration Methods
+
+The MuJoCo file `scene.xml` supports two differenly calibrated SO101 robot files:
+
+- **New Calibration (Default)**: Each joint's virtual zero is set to the **middle** of its joint range. Use -> `so101_new_calib.xml`. 
+- **Old Calibration**: Each joint's virtual zero is set to the configuration where the robot is **fully extended horizontally**. Use -> `so101_old_calib.xml`.
+
+To switch between calibration methods, modify the included robot file in `scene.xml`.
+
+## Motor Parameters
+
+Motor properties for the STS3215 motors used in the robot are adapted from the [Open Duck Mini project](https://github.com/apirrone/Open_Duck_Mini).
+
+## Gripper Note
+
+In LeRobot, the gripper is represented as a **linear joint**, where:
+
+* `0` = fully closed
+* `100` = fully open
+
+This mapping is **not yet reflected** in the current URDF and MuJoCo files. 
+
+---
+
+Feel free to open an issue or contribute improvements!

SO101/assets/base_motor_holder_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "84d8ae1881704ebae1ffb70a",
+    "documentMicroversion": "0eea3500852bdb2f58b1cb79",
+    "documentVersion": "a5c3b0dfaa52ddd6829011cd",
+    "elementId": "22efbe4e0bef24fcd20f96e5",
+    "fullConfiguration": "default",
+    "id": "MCOhripg0ry51VlsC",
+    "isStandardContent": false,
+    "name": "Base_motor_holder_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/base_motor_holder_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8cd2f241037ea377af1191fffe0dd9d9006beea6dcc48543660ed41647072424
+size 1877084

SO101/assets/base_so101_v2.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "bf61a6bc85b1d1a8bf9ea51b",
+    "documentMicroversion": "20484d37162a32a8a41a37f2",
+    "documentVersion": "25801b070e5b360715de8a30",
+    "elementId": "312f32f0073fa6e8e36fba7a",
+    "fullConfiguration": "default",
+    "id": "MY69cJlqvSzIiODdH",
+    "isStandardContent": false,
+    "name": "Base_SO101 v2 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/base_so101_v2.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:bb12b7026575e1f70ccc7240051f9d943553bf34e5128537de6cd86fae33924d
+size 471584

SO101/assets/motor_holder_so101_base_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "652d5731024e57367badfda6",
+    "documentMicroversion": "56a8b8013480c176fd87df8d",
+    "documentVersion": "984ac31c92cac3664c8effb3",
+    "elementId": "6fb7b7f9315511b548d670ff",
+    "fullConfiguration": "default",
+    "id": "Mf4ZebMr4BkShucFj",
+    "isStandardContent": false,
+    "name": "Motor_holder_SO101_Base v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/motor_holder_so101_base_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:31242ae6fb59d8b15c66617b88ad8e9bded62d57c35d11c0c43a70d2f4caa95b
+size 1129384

SO101/assets/motor_holder_so101_wrist_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "4bd66da73cacb4d946d43e44",
+    "documentMicroversion": "2bf56247e58b70e90806e318",
+    "documentVersion": "df78bb7089f1de7d5588d238",
+    "elementId": "d7dfe76e402c21bbd8124e43",
+    "fullConfiguration": "default",
+    "id": "MN9BZ1p69dQQtKTjq",
+    "isStandardContent": false,
+    "name": "Motor_holder_SO101_Wrist v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/motor_holder_so101_wrist_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:887f92e6013cb64ea3a1ab8675e92da1e0beacfd5e001f972523540545e08011
+size 1052184

SO101/assets/moving_jaw_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "46218c02ef80d36172edbb35",
+    "documentMicroversion": "68b7d387e2500c451586ae59",
+    "documentVersion": "79c101d1a0207b77362b561a",
+    "elementId": "d4b1411d5d7333298f6e2458",
+    "fullConfiguration": "default",
+    "id": "MrHPLr9hZkrXwcSA4",
+    "isStandardContent": false,
+    "name": "Moving_Jaw_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/moving_jaw_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:785a9dded2f474bc1d869e0d3dae398a3dcd9c0c345640040472210d2861fa9d
+size 1413584

SO101/assets/rotation_pitch_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "14078aa6723c502d07d6902e",
+    "documentMicroversion": "c0fca717407275159bcc6ed7",
+    "documentVersion": "3d9a887ff68fa477d98162b8",
+    "elementId": "43d24b3857ff686b275578bf",
+    "fullConfiguration": "default",
+    "id": "MrQ6Kmk9QDZlwbp95",
+    "isStandardContent": false,
+    "name": "Rotation_Pitch_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/rotation_pitch_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:9be900cc2a2bf718102841ef82ef8d2873842427648092c8ed2ca1e2ef4ffa34
+size 883684

SO101/assets/sts3215_03a_no_horn_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "56e5f3702dad85e17841d2e2",
+    "documentMicroversion": "7958a6acbc8e0d0a0a611746",
+    "documentVersion": "29a4c51b8bf277a22743a333",
+    "elementId": "8c14fb13a6557ec89ff5d227",
+    "fullConfiguration": "default",
+    "id": "MOcaIFg8XgL+Ybg9z",
+    "isStandardContent": false,
+    "name": "STS3215_03a_no_horn v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/sts3215_03a_no_horn_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:75ef3781b752e4065891aea855e34dc161a38a549549cd0970cedd07eae6f887
+size 865884

SO101/assets/sts3215_03a_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "d2941bdba816affebdc6d6f0",
+    "documentMicroversion": "5904ef3cea04a0d0bc88b698",
+    "documentVersion": "dd4f7470101215836a4ae8c9",
+    "elementId": "e670b72d49b06f88fad5dbd8",
+    "fullConfiguration": "default",
+    "id": "M5vQNpe0onRFueych",
+    "isStandardContent": false,
+    "name": "STS3215_03a v1 <5>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/sts3215_03a_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:a37c871fb502483ab96c256baf457d36f2e97afc9205313d9c5ab275ef941cd0
+size 954084

SO101/assets/under_arm_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "9f5d6db47eb112442b9f130f",
+    "documentMicroversion": "e99cf45162e34789bd99512b",
+    "documentVersion": "817ebf29c5663d412edc0753",
+    "elementId": "2813aaffe3c8a342616d3527",
+    "fullConfiguration": "default",
+    "id": "M9yAEiX02J3c4HqXa",
+    "isStandardContent": false,
+    "name": "Under_arm_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/under_arm_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d01d1f2de365651dcad9d6669e94ff87ff7652b5bb2d10752a66a456a86dbc71
+size 1975884

SO101/assets/upper_arm_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "57f3eae43434311c28ac752b",
+    "documentMicroversion": "33eeab136e831427f0f0ca74",
+    "documentVersion": "435d47b71ef26075bf82672c",
+    "elementId": "a8e0c02dc43f7ccb373c52e4",
+    "fullConfiguration": "default",
+    "id": "Ml3rwO4kV53jDRgcs",
+    "isStandardContent": false,
+    "name": "Upper_arm_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/upper_arm_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:475056e03a17e71919b82fd88ab9a0b898ab50164f2a7943652a6b2941bb2d4f
+size 1303484

SO101/assets/waveshare_mounting_plate_so101_v2.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "066f8b5064455ec46759cd8c",
+    "documentMicroversion": "04c5790374bf3edfbbb7e818",
+    "documentVersion": "408440a116f7d8700bbb11c2",
+    "elementId": "dc35e56269e36de39738b34d",
+    "fullConfiguration": "default",
+    "id": "MjhXxhyF1+iAgCtUh",
+    "isStandardContent": false,
+    "name": "WaveShare_Mounting_Plate_SO101 v2 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/waveshare_mounting_plate_so101_v2.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e197e24005a07d01bbc06a8c42311664eaeda415bf859f68fa247884d0f1a6e9
+size 62784

SO101/assets/wrist_roll_follower_so101_v1.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "e02f1e1d3fdd766a19a55890",
+    "documentMicroversion": "03f1dfc090db6bbecdb14475",
+    "documentVersion": "8a15327cfbde0344e0951076",
+    "elementId": "2317bd70c68862eeebd64492",
+    "fullConfiguration": "default",
+    "id": "MpI0voU28BOAZ6D9x",
+    "isStandardContent": false,
+    "name": "Wrist_Roll_Follower_SO101 v1 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/wrist_roll_follower_so101_v1.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:4b17b410a12d64ec39554abc3e8054d8a97384b2dc4a8d95a5ecb2a93670f5f4
+size 1439884

SO101/assets/wrist_roll_pitch_so101_v2.part

@@ -0,0 +1,14 @@
+{
+    "configuration": "default",
+    "documentId": "eb144d215e733b8dbbb50b81",
+    "documentMicroversion": "4fef760722dee3a9b5ff19b1",
+    "documentVersion": "5880c1e9413206cac10772d0",
+    "elementId": "3c22c2c23cb0ce545b9df2ba",
+    "fullConfiguration": "default",
+    "id": "Ma99J59HxnSe2TArb",
+    "isStandardContent": false,
+    "name": "Wrist_Roll_Pitch_SO101 v2 <1>",
+    "partId": "JFD",
+    "suppressed": false,
+    "type": "Part"
+}

SO101/assets/wrist_roll_pitch_so101_v2.stl

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:6c7ec5525b4d8b9e397a30ab4bb0037156a5d5f38a4adf2c7d943d6c56eda5ae
+size 2699784

SO101/joints_properties.xml

@@ -0,0 +1,12 @@
+<default>
+    <default class="sts3215">
+        <geom contype="0" conaffinity="0"/>
+        <joint damping="0.60" frictionloss="0.052" armature="0.028"/>
+        <position kp="17.8" kv="0.0" forcerange="-3.35 3.35"/>
+    </default>
+    <default class="backlash">
+        <!-- +/- 0.5° of backlash -->
+        <joint damping="0.01" frictionloss="0" armature="0.01" limited="true"
+            range="-0.008726646259971648 0.008726646259971648"/>
+    </default>
+</default>

SO101/scene.xml

@@ -0,0 +1,24 @@
+<mujoco model="scene">
+    <include file="so101_new_calib.xml" />
+
+    <visual>
+        <headlight diffuse="0.6 0.6 0.6" ambient="0.3 0.3 0.3" specular="0 0 0" />
+        <rgba haze="0.15 0.25 0.35 1" />
+        <global azimuth="160" elevation="-20" />
+    </visual>
+
+    <asset>
+        <texture type="skybox" builtin="gradient" rgb1="0.3 0.5 0.7" rgb2="0 0 0" width="512"
+            height="3072" />
+        <texture type="2d" name="groundplane" builtin="checker" mark="edge" rgb1="0.2 0.3 0.4"
+            rgb2="0.1 0.2 0.3"
+            markrgb="0.8 0.8 0.8" width="300" height="300" />
+        <material name="groundplane" texture="groundplane" texuniform="true" texrepeat="5 5"
+            reflectance="0.2" />
+    </asset>
+
+    <worldbody>
+        <light pos="0 0 3.5" dir="0 0 -1" directional="true" />
+        <geom name="floor" size="0 0 0.05" pos="0 0 0" type="plane" material="groundplane" />
+    </worldbody>
+</mujoco>

SO101/so101_new_calib.urdf

@@ -0,0 +1,453 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generated using onshape-to-robot -->
+<!-- Onshape https://cad.onshape.com/documents/7715cc284bb430fe6dab4ffd/w/4fd0791b683777b02f8d975a/e/826c553ede3b7592eb9ca800 -->
+<robot name="so101_new_calib">
+
+  <!-- Materials -->
+  <material name="3d_printed">
+    <color rgba="1.0 0.82 0.12 1.0"/>
+  </material>
+  <material name="sts3215">
+    <color rgba="0.1 0.1 0.1 1.0"/>
+  </material>
+
+  <!-- Link base -->
+  <link name="base_link">
+    <inertial>
+      <origin xyz="0.0137179 -5.19711e-05 0.0334843" rpy="0 0 0"/>
+      <mass value="0.147"/>
+      <inertia ixx="0.000114686" ixy="-4.59787e-07" ixz="4.97151e-06" iyy="0.000136117" iyz="9.75275e-08" izz="0.000130364"/>
+    </inertial>
+    <!-- Part base_motor_holder_so101_v1 -->
+    <visual>
+      <origin xyz="-0.00636471 -9.94414e-05 -0.0024" rpy="1.5708 -1.67685e-15 1.5708"/>
+      <geometry>
+        <mesh filename="assets/base_motor_holder_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.00636471 -9.94414e-05 -0.0024" rpy="1.5708 -1.67685e-15 1.5708"/>
+      <geometry>
+        <mesh filename="assets/base_motor_holder_so101_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part base_so101_v2 -->
+    <visual>
+      <origin xyz="-0.00636471 -8.97657e-09 -0.0024" rpy="1.5708 -2.78073e-29 1.5708"/>
+      <geometry>
+        <mesh filename="assets/base_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.00636471 -8.97657e-09 -0.0024" rpy="1.5708 -2.78073e-29 1.5708"/>
+      <geometry>
+        <mesh filename="assets/base_so101_v2.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part sts3215_03a_v1 -->
+    <visual>
+      <origin xyz="0.0263353 -8.97657e-09 0.0437" rpy="-8.21148e-16 7.84513e-18 1.249e-15"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0263353 -8.97657e-09 0.0437" rpy="-8.21148e-16 7.84513e-18 1.249e-15"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part waveshare_mounting_plate_so101_v2 -->
+    <visual>
+      <origin xyz="-0.0309827 -0.000199441 0.0474" rpy="1.5708 -1.35493e-14 1.5708"/>
+      <geometry>
+        <mesh filename="assets/waveshare_mounting_plate_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0309827 -0.000199441 0.0474" rpy="1.5708 -1.35493e-14 1.5708"/>
+      <geometry>
+        <mesh filename="assets/waveshare_mounting_plate_so101_v2.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link shoulder -->
+  <link name="shoulder_link">
+    <inertial>
+      <origin xyz="-0.0307604 -1.66727e-05 -0.0252713" rpy="0 0 0"/>
+      <mass value="0.100006"/>
+      <inertia ixx="8.3759e-05" ixy="7.55525e-08" ixz="-1.16342e-06" iyy="8.10403e-05" iyz="1.54663e-07" izz="2.39783e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_2 -->
+    <visual>
+      <origin xyz="-0.0303992 0.000422241 -0.0417" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0303992 0.000422241 -0.0417" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part motor_holder_so101_base_v1 -->
+    <visual>
+      <origin xyz="-0.0675992 -0.000177759 0.0158499" rpy="1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_base_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0675992 -0.000177759 0.0158499" rpy="1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_base_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part rotation_pitch_so101_v1 -->
+    <visual>
+      <origin xyz="0.0122008 2.22413e-05 0.0464" rpy="-1.5708 2.35221e-33 0"/>
+      <geometry>
+        <mesh filename="assets/rotation_pitch_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0122008 2.22413e-05 0.0464" rpy="-1.5708 2.35221e-33 0"/>
+      <geometry>
+        <mesh filename="assets/rotation_pitch_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link upper_arm -->
+  <link name="upper_arm_link">
+    <inertial>
+      <origin xyz="-0.0898471 -0.00838224 0.0184089" rpy="0 0 0"/>
+      <mass value="0.103"/>
+      <inertia ixx="4.08002e-05" ixy="-1.97819e-05" ixz="-4.03016e-08" iyy="0.000147318" iyz="8.97326e-09" izz="0.000142487"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_3 -->
+    <visual>
+      <origin xyz="-0.11257 -0.0155 0.0187" rpy="-3.14159 -5.27356e-16 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.11257 -0.0155 0.0187" rpy="-3.14159 -5.27356e-16 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part upper_arm_so101_v1 -->
+    <visual>
+      <origin xyz="-0.065085 0.012 0.0182" rpy="3.14159 -0 -1.30911e-30"/>
+      <geometry>
+        <mesh filename="assets/upper_arm_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.065085 0.012 0.0182" rpy="3.14159 -0 -1.30911e-30"/>
+      <geometry>
+        <mesh filename="assets/upper_arm_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link lower_arm -->
+  <link name="lower_arm_link">
+    <inertial>
+      <origin xyz="-0.0980701 0.00324376 0.0182831" rpy="0 0 0"/>
+      <mass value="0.104"/>
+      <inertia ixx="2.87438e-05" ixy="7.41152e-06" ixz="1.26409e-06" iyy="0.000159844" iyz="-4.90188e-08" izz="0.00014529"/>
+    </inertial>
+    <!-- Part under_arm_so101_v1 -->
+    <visual>
+      <origin xyz="-0.0648499 -0.032 0.0182" rpy="3.14159 -0 6.67202e-31"/>
+      <geometry>
+        <mesh filename="assets/under_arm_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0648499 -0.032 0.0182" rpy="3.14159 -0 6.67202e-31"/>
+      <geometry>
+        <mesh filename="assets/under_arm_so101_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part motor_holder_so101_wrist_v1 -->
+    <visual>
+      <origin xyz="-0.0648499 -0.032 0.018" rpy="-3.14159 -2.55351e-15 -1.83387e-30"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_wrist_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0648499 -0.032 0.018" rpy="-3.14159 -2.55351e-15 -1.83387e-30"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_wrist_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part sts3215_03a_v1_4 -->
+    <visual>
+      <origin xyz="-0.1224 0.0052 0.0187" rpy="-3.14159 -7.88861e-31 -3.14159"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.1224 0.0052 0.0187" rpy="-3.14159 -7.88861e-31 -3.14159"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link wrist -->
+  <link name="wrist_link">
+    <inertial>
+      <origin xyz="-0.000103312 -0.0386143 0.0281156" rpy="0 0 0"/>
+      <mass value="0.079"/>
+      <inertia ixx="3.68263e-05" ixy="1.7893e-08" ixz="-5.28128e-08" iyy="2.5391e-05" iyz="3.6412e-06" izz="2.1e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_no_horn_v1 -->
+    <visual>
+      <origin xyz="8.32667e-17 -0.0424 0.0306" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_no_horn_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="8.32667e-17 -0.0424 0.0306" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_no_horn_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part wrist_roll_pitch_so101_v2 -->
+    <visual>
+      <origin xyz="0 -0.028 0.0181" rpy="-1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_pitch_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0 -0.028 0.0181" rpy="-1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_pitch_so101_v2.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link gripper -->
+  <link name="gripper_link">
+    <inertial>
+      <origin xyz="0.000213627 0.000245138 -0.025187" rpy="0 0 0"/>
+      <mass value="0.087"/>
+      <inertia ixx="2.75087e-05" ixy="-3.35241e-07" ixz="-5.7352e-06" iyy="4.33657e-05" iyz="-5.17847e-08" izz="3.45059e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_5 -->
+    <visual>
+      <origin xyz="0.0077 0.0001 -0.0234" rpy="-1.5708 -5.19179e-17 -1.66533e-16"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0077 0.0001 -0.0234" rpy="-1.5708 -5.19179e-17 -1.66533e-16"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part wrist_roll_follower_so101_v1 -->
+    <visual>
+      <origin xyz="8.32667e-17 -0.000218214 0.000949706" rpy="-3.14159 -5.55112e-17 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_follower_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="8.32667e-17 -0.000218214 0.000949706" rpy="-3.14159 -5.55112e-17 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_follower_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Gripper frame (dummy link + fixed joint) -->
+  <link name="gripper_frame_link">
+    <origin xyz="0 0 0" rpy="0 -0 0"/>
+    <inertial>
+      <origin xyz="0 0 0" rpy="0 0 0"/>
+      <mass value="1e-9"/>
+      <inertia ixx="0" ixy="0" ixz="0" iyy="0" iyz="0" izz="0"/>
+    </inertial>
+  </link>
+
+  <joint name="gripper_frame_joint" type="fixed">
+    <origin xyz="-0.0079 -0.000218121 -0.0981274" rpy="0 3.14159 0"/>
+    <parent link="gripper_link"/>
+    <child link="gripper_frame_link"/>
+    <axis xyz="0 0 0"/>
+  </joint>
+
+  <!-- Link moving_jaw_so101_v1 -->
+  <link name="moving_jaw_so101_v1_link">
+    <inertial>
+      <origin xyz="-0.00157495 -0.0300244 0.0192755" rpy="0 0 0"/>
+      <mass value="0.012"/>
+      <inertia ixx="6.61427e-06" ixy="-3.19807e-07" ixz="-5.90717e-09" iyy="1.89032e-06" iyz="-1.09945e-07" izz="5.28738e-06"/>
+    </inertial>
+    <!-- Part moving_jaw_so101_v1 -->
+    <visual>
+      <origin xyz="-5.55112e-17 -5.55112e-17 0.0189" rpy="9.53145e-17 6.93889e-18 1.24077e-24"/>
+      <geometry>
+        <mesh filename="assets/moving_jaw_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-5.55112e-17 -5.55112e-17 0.0189" rpy="9.53145e-17 6.93889e-18 1.24077e-24"/>
+      <geometry>
+        <mesh filename="assets/moving_jaw_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Joint from gripper to moving_jaw_so101_v1 -->
+  <joint name="gripper" type="revolute">
+    <origin xyz="0.0202 0.0188 -0.0234" rpy="1.5708 -5.24284e-08 -1.41553e-15"/>
+    <parent link="gripper_link"/>
+    <child link="moving_jaw_so101_v1_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-0.174533" upper="1.74533"/>
+  </joint>
+
+  <transmission name="gripper_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="gripper">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor6">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from wrist to gripper -->
+  <joint name="wrist_roll" type="revolute">
+    <origin xyz="5.55112e-17 -0.0611 0.0181" rpy="1.5708 0.0486795 3.14159"/>
+    <parent link="wrist_link"/>
+    <child link="gripper_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-2.74385" upper="2.84121"/>
+  </joint>
+
+  <transmission name="wrist_roll_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_roll">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor5">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from lower_arm to wrist -->
+  <joint name="wrist_flex" type="revolute">
+    <origin xyz="-0.1349 0.0052 3.62355e-17" rpy="4.02456e-15 8.67362e-16 -1.5708"/>
+    <parent link="lower_arm_link"/>
+    <child link="wrist_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.65806" upper="1.65806"/>
+  </joint>
+
+  <transmission name="wrist_flex_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_flex">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor4">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from upper_arm to lower_arm -->
+  <!-- Note: 5-degree calibration offset applied to joint limits -->
+  <joint name="elbow_flex" type="revolute">
+    <origin xyz="-0.11257 -0.028 1.73763e-16" rpy="-3.63608e-16 8.74301e-16 1.5708"/>
+    <parent link="upper_arm_link"/>
+    <child link="lower_arm_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.69" upper="1.69"/>
+  </joint>
+
+  <transmission name="elbow_flex_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="elbow_flex">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor3">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from shoulder to upper_arm -->
+  <joint name="shoulder_lift" type="revolute">
+    <origin xyz="-0.0303992 -0.0182778 -0.0542" rpy="-1.5708 -1.5708 0"/>
+    <parent link="shoulder_link"/>
+    <child link="upper_arm_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.74533" upper="1.74533"/>
+  </joint>
+
+  <transmission name="shoulder_lift_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_lift">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor2">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from base to shoulder -->
+  <joint name="shoulder_pan" type="revolute">
+    <origin xyz="0.0388353 -8.97657e-09 0.0624" rpy="3.14159 4.18253e-17 -3.14159"/>
+    <parent link="base_link"/>
+    <child link="shoulder_link"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.91986" upper="1.91986"/>
+  </joint>
+
+  <transmission name="shoulder_pan_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_pan">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor1">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission> 
+
+</robot>

SO101/so101_new_calib.xml

@@ -0,0 +1,162 @@
+<?xml version="1.0" ?>
+<!-- Generated using onshape-to-robot -->
+<!-- Onshape https://cad.onshape.com/documents/7715cc284bb430fe6dab4ffd/w/4fd0791b683777b02f8d975a/e/826c553ede3b7592eb9ca800 -->
+<mujoco model="so101_new_calib">
+  <compiler angle="radian" meshdir="assets" autolimits="true"/>
+  <default>
+    <default class="so101_new_calib">
+      <joint damping="1" frictionloss="0.1" armature="0.005"/>
+      <position kp="50"/>
+      <default class="visual">
+        <geom type="mesh" contype="0" conaffinity="0" group="2"/>
+      </default>
+      <default class="collision">
+        <geom group="3"/>
+      </default>
+    </default>
+  </default>
+  <!-- Additional joints_properties.xml -->
+  <default>
+    <default class="sts3215">
+      <geom contype="0" conaffinity="0"/>
+      <joint damping="0.60" frictionloss="0.052" armature="0.028"/>
+      <!-- For lerobot this are not exactly the motor params as the Kp and Kd not map 1-to-1 thus motor idendification with lerobot Kp=16 and Kd=32 should actually be done -->
+      <position kp="17.8"/>
+    </default>
+    <default class="backlash">
+      <!-- +/- 0.5° of backlash -->
+      <joint damping="0.01" frictionloss="0" armature="0.01" limited="true" range="-0.008726646259971648 0.008726646259971648"/>
+    </default>
+  </default>
+  <worldbody>
+    <!-- Link base -->
+    <body name="base" pos="0 0 0" quat="1 0 0 0" childclass="so101_new_calib">
+      <inertial pos="0.0137179 -5.19711e-05 0.0334843" mass="0.147" fullinertia="0.000114686 0.000136117 0.000130364 -4.59787e-07 4.97151e-06 9.75275e-08"/>
+      <!-- Part base_motor_holder_so101_v1 -->
+      <geom type="mesh" class="visual" pos="-0.00636471 -9.94414e-05 -0.0024" quat="0.5 0.5 0.5 0.5" mesh="base_motor_holder_so101_v1" material="base_motor_holder_so101_v1_material"/>
+      <!-- Part base_so101_v2 -->
+      <geom type="mesh" class="visual" pos="-0.00636471 -8.97657e-09 -0.0024" quat="0.5 0.5 0.5 0.5" mesh="base_so101_v2" material="base_so101_v2_material"/>
+      <!-- Part sts3215_03a_v1 -->
+      <geom type="mesh" class="visual" pos="0.0263353 -8.97657e-09 0.0437" quat="1 -2.85511e-16 -9.64433e-17 6.12908e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+      <!-- Part waveshare_mounting_plate_so101_v2 -->
+      <geom type="mesh" class="visual" pos="-0.0309827 -0.000199441 0.0474" quat="0.5 0.5 0.5 0.5" mesh="waveshare_mounting_plate_so101_v2" material="waveshare_mounting_plate_so101_v2_material"/>
+      <!-- Frame baseframe -->
+      <site group="3" name="baseframe" pos="8.67362e-19 9.55596e-18 3.46945e-18" quat="1 -8.17396e-19 3.78392e-17 2.22045e-16"/>
+      <!-- Link shoulder -->
+      <body name="shoulder" pos="0.0388353 -8.97657e-09 0.0624" quat="3.56167e-16 1.22818e-15 -1 -4.14635e-16">
+        <!-- Joint from base to shoulder -->
+        <joint axis="0 0 1" name="shoulder_pan" type="hinge" range="-1.9198621771937616 1.9198621771937634" class="sts3215"/>
+        <inertial pos="-0.0307604 -1.66727e-05 -0.0252713" mass="0.100006" fullinertia="8.3759e-05 8.10403e-05 2.39783e-05 7.55525e-08 -1.16342e-06 1.54663e-07"/>
+        <!-- Part sts3215_03a_v1_2 -->
+        <geom type="mesh" class="visual" pos="-0.0303992 0.000422241 -0.0417" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+        <geom type="mesh" class="collision" pos="-0.0303992 0.000422241 -0.0417" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+        <!-- Part motor_holder_so101_base_v1 -->
+        <geom type="mesh" class="visual" pos="-0.0675992 -0.000177759 0.0158499" quat="0.5 0.5 -0.5 0.5" mesh="motor_holder_so101_base_v1" material="motor_holder_so101_base_v1_material"/>
+        <geom type="mesh" class="collision" pos="-0.0675992 -0.000177759 0.0158499" quat="0.5 0.5 -0.5 0.5" mesh="motor_holder_so101_base_v1" material="motor_holder_so101_base_v1_material"/>
+        <!-- Part rotation_pitch_so101_v1 -->
+        <geom type="mesh" class="visual" pos="0.0122008 2.22413e-05 0.0464" quat="0.707107 -0.707107 -0 8.3163e-34" mesh="rotation_pitch_so101_v1" material="rotation_pitch_so101_v1_material"/>
+        <geom type="mesh" class="collision" pos="0.0122008 2.22413e-05 0.0464" quat="0.707107 -0.707107 -0 8.3163e-34" mesh="rotation_pitch_so101_v1" material="rotation_pitch_so101_v1_material"/>
+        <!-- Link upper_arm -->
+        <body name="upper_arm" pos="-0.0303992 -0.0182778 -0.0542" quat="0.5 -0.5 -0.5 -0.5">
+          <!-- Joint from shoulder to upper_arm -->
+          <joint axis="0 0 1" name="shoulder_lift" type="hinge" range="-1.7453292519943224 1.7453292519943366" class="sts3215"/>
+          <inertial pos="-0.0898471 -0.00838224 0.0184089" mass="0.103" fullinertia="4.08002e-05 0.000147318 0.000142487 -1.97819e-05 -4.03016e-08 8.97326e-09"/>
+          <!-- Part sts3215_03a_v1_3 -->
+          <geom type="mesh" class="visual" pos="-0.11257 -0.0155 0.0187" quat="4.56308e-16 -0.707107 0.707107 -1.37383e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+          <geom type="mesh" class="collision" pos="-0.11257 -0.0155 0.0187" quat="4.56308e-16 -0.707107 0.707107 -1.37383e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+          <!-- Part upper_arm_so101_v1 -->
+          <geom type="mesh" class="visual" pos="-0.065085 0.012 0.0182" quat="0 1 0 0" mesh="upper_arm_so101_v1" material="upper_arm_so101_v1_material"/>
+          <geom type="mesh" class="collision" pos="-0.065085 0.012 0.0182" quat="0 1 0 0" mesh="upper_arm_so101_v1" material="upper_arm_so101_v1_material"/>
+          <!-- Link lower_arm -->
+          <body name="lower_arm" pos="-0.11257 -0.028 1.73763e-16" quat="0.707107 -5.98613e-17 -2.58051e-17 0.707107">
+            <!-- Joint from upper_arm to lower_arm -->
+            <!-- Note: 5-degree calibration offset applied to joint range -->
+            <joint axis="0 0 1" name="elbow_flex" type="hinge" range="-1.69 1.69" class="sts3215"/>
+            <inertial pos="-0.0980701 0.00324376 0.0182831" mass="0.104" fullinertia="2.87438e-05 0.000159844 0.00014529 7.41152e-06 1.26409e-06 -4.90188e-08"/>
+            <!-- Part under_arm_so101_v1 -->
+            <geom type="mesh" class="visual" pos="-0.0648499 -0.032 0.0182" quat="0 1 0 0" mesh="under_arm_so101_v1" material="under_arm_so101_v1_material"/>
+            <geom type="mesh" class="collision" pos="-0.0648499 -0.032 0.0182" quat="0 1 0 0" mesh="under_arm_so101_v1" material="under_arm_so101_v1_material"/>
+            <!-- Part motor_holder_so101_wrist_v1 -->
+            <geom type="mesh" class="visual" pos="-0.0648499 -0.032 0.018" quat="3.92687e-16 -1 -1.9186e-15 -6.38378e-16" mesh="motor_holder_so101_wrist_v1" material="motor_holder_so101_wrist_v1_material"/>
+            <geom type="mesh" class="collision" pos="-0.0648499 -0.032 0.018" quat="3.92687e-16 -1 -1.9186e-15 -6.38378e-16" mesh="motor_holder_so101_wrist_v1" material="motor_holder_so101_wrist_v1_material"/>
+            <!-- Part sts3215_03a_v1_4 -->
+            <geom type="mesh" class="visual" pos="-0.1224 0.0052 0.0187" quat="7.21645e-16 1.56949e-15 1 -3.33067e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+            <geom type="mesh" class="collision" pos="-0.1224 0.0052 0.0187" quat="7.21645e-16 1.56949e-15 1 -3.33067e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+            <!-- Link wrist -->
+            <body name="wrist" pos="-0.1349 0.0052 3.62355e-17" quat="0.707107 9.58722e-16 -7.51313e-16 -0.707107">
+              <!-- Joint from lower_arm to wrist -->
+              <joint axis="0 0 1" name="wrist_flex" type="hinge" range="-1.6580628494556928 1.6580627293335335" class="sts3215"/>
+              <inertial pos="-0.000103312 -0.0386143 0.0281156" mass="0.079" fullinertia="3.68263e-05 2.5391e-05 2.1e-05 1.7893e-08 -5.28128e-08 3.6412e-06"/>
+              <!-- Part sts3215_03a_no_horn_v1 -->
+              <geom type="mesh" class="visual" pos="8.32667e-17 -0.0424 0.0306" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_no_horn_v1" material="sts3215_03a_no_horn_v1_material"/>
+              <geom type="mesh" class="collision" pos="8.32667e-17 -0.0424 0.0306" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_no_horn_v1" material="sts3215_03a_no_horn_v1_material"/>
+              <!-- Part wrist_roll_pitch_so101_v2 -->
+              <geom type="mesh" class="visual" pos="0 -0.028 0.0181" quat="0.5 -0.5 -0.5 -0.5" mesh="wrist_roll_pitch_so101_v2" material="wrist_roll_pitch_so101_v2_material"/>
+              <geom type="mesh" class="collision" pos="0 -0.028 0.0181" quat="0.5 -0.5 -0.5 -0.5" mesh="wrist_roll_pitch_so101_v2" material="wrist_roll_pitch_so101_v2_material"/>
+              <!-- Link gripper -->
+              <body name="gripper" pos="5.55112e-17 -0.0611 0.0181" quat="0.0172091 -0.0172091 0.706897 0.706897">
+                <!-- Joint from wrist to gripper -->
+                <joint axis="0 0 1" name="wrist_roll" type="hinge" range="-2.7438472969992493 2.841206309382605" class="sts3215"/>
+                <inertial pos="0.000213627 0.000245138 -0.025187" mass="0.087" fullinertia="2.75087e-05 4.33657e-05 3.45059e-05 -3.35241e-07 -5.7352e-06 -5.17847e-08"/>
+                <!-- Part sts3215_03a_v1_5 -->
+                <geom type="mesh" class="visual" pos="0.0077 0.0001 -0.0234" quat="0.707107 -0.707107 1.66015e-15 6.45094e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+                <geom type="mesh" class="collision" pos="0.0077 0.0001 -0.0234" quat="0.707107 -0.707107 1.66015e-15 6.45094e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+                <!-- Part wrist_roll_follower_so101_v1 -->
+                <geom type="mesh" class="visual" pos="8.32667e-17 -0.000218214 0.000949706" quat="0 1 0 0" mesh="wrist_roll_follower_so101_v1" material="wrist_roll_follower_so101_v1_material"/>
+                <geom type="mesh" class="collision" pos="8.32667e-17 -0.000218214 0.000949706" quat="0 1 0 0" mesh="wrist_roll_follower_so101_v1" material="wrist_roll_follower_so101_v1_material"/>
+                <!-- Frame gripperframe -->
+                <site group="3" name="gripperframe" pos="-0.0079 -0.000218121 -0.0981274" quat="0.707107 -0 0.707107 -2.37788e-17"/>
+                <!-- Link moving_jaw_so101_v1 -->
+                <body name="moving_jaw_so101_v1" pos="0.0202 0.0188 -0.0234" quat="0.707107 0.707107 -1.85362e-08 1.85362e-08">
+                  <!-- Joint from gripper to moving_jaw_so101_v1 -->
+                  <joint axis="0 0 1" name="gripper" type="hinge" range="-0.17453297762778586 1.7453291995659765" class="sts3215"/>
+                  <inertial pos="-0.00157495 -0.0300244 0.0192755" mass="0.012" fullinertia="6.61427e-06 1.89032e-06 5.28738e-06 -3.19807e-07 -5.90717e-09 -1.09945e-07"/>
+                  <!-- Part moving_jaw_so101_v1 -->
+                  <geom type="mesh" class="visual" pos="-5.55112e-17 -5.55112e-17 0.0189" quat="1 -0 3.00524e-16 -2.00834e-17" mesh="moving_jaw_so101_v1" material="moving_jaw_so101_v1_material"/>
+                  <geom type="mesh" class="collision" pos="-5.55112e-17 -5.55112e-17 0.0189" quat="1 -0 3.00524e-16 -2.00834e-17" mesh="moving_jaw_so101_v1" material="moving_jaw_so101_v1_material"/>
+                </body>
+              </body>
+            </body>
+          </body>
+        </body>
+      </body>
+    </body>
+  </worldbody>
+  <asset>
+    <mesh file="waveshare_mounting_plate_so101_v2.stl"/>
+    <mesh file="sts3215_03a_v1.stl"/>
+    <mesh file="motor_holder_so101_base_v1.stl"/>
+    <mesh file="wrist_roll_follower_so101_v1.stl"/>
+    <mesh file="moving_jaw_so101_v1.stl"/>
+    <mesh file="base_motor_holder_so101_v1.stl"/>
+    <mesh file="upper_arm_so101_v1.stl"/>
+    <mesh file="wrist_roll_pitch_so101_v2.stl"/>
+    <mesh file="under_arm_so101_v1.stl"/>
+    <mesh file="rotation_pitch_so101_v1.stl"/>
+    <mesh file="motor_holder_so101_wrist_v1.stl"/>
+    <mesh file="sts3215_03a_no_horn_v1.stl"/>
+    <mesh file="base_so101_v2.stl"/>
+    <material name="base_motor_holder_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="base_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="sts3215_03a_v1_material" rgba="0.1 0.1 0.1 1"/>
+    <material name="waveshare_mounting_plate_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="motor_holder_so101_base_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="rotation_pitch_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="upper_arm_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="under_arm_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="motor_holder_so101_wrist_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="sts3215_03a_no_horn_v1_material" rgba="0.1 0.1 0.1 1.0"/>
+    <material name="wrist_roll_pitch_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="wrist_roll_follower_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="moving_jaw_so101_v1_material" rgba="1 0.82 0.12 1"/>
+  </asset>
+  <actuator>
+    <position class="sts3215" name="shoulder_pan" joint="shoulder_pan" forcerange="-3.35 3.35" ctrlrange="-1.91986 1.91986"/>
+    <position class="sts3215" name="shoulder_lift" joint="shoulder_lift" forcerange="-3.35 3.35" ctrlrange="-1.74533 1.74533"/>
+    <position class="sts3215" name="elbow_flex" joint="elbow_flex" forcerange="-3.35 3.35" ctrlrange="-1.69 1.69"/>
+    <position class="sts3215" name="wrist_flex" joint="wrist_flex" forcerange="-3.35 3.35" ctrlrange="-1.65806 1.65806"/>
+    <position class="sts3215" name="wrist_roll" joint="wrist_roll" forcerange="-3.35 3.35" ctrlrange="-2.74385 2.84121"/>
+    <position class="sts3215" name="gripper" joint="gripper" forcerange="-3.35 3.35" ctrlrange="-0.17453 1.74533"/>
+  </actuator>
+  <equality/>
+</mujoco>

SO101/so101_old_calib.urdf

@@ -0,0 +1,435 @@
+<?xml version='1.0' encoding='utf-8'?>
+<!-- Generated using onshape-to-robot -->
+<!-- Onshape https://cad.onshape.com/documents/7715cc284bb430fe6dab4ffd/w/4fd0791b683777b02f8d975a/e/826c553ede3b7592eb9ca800 -->
+<robot name="so101_old_calib">
+
+  <!-- Materials -->
+  <material name="3d_printed">
+    <color rgba="1.0 0.82 0.12 1.0"/>
+  </material>
+  <material name="sts3215">
+    <color rgba="0.1 0.1 0.1 1.0"/>
+  </material>
+
+  <!-- Link base -->
+  <link name="base">
+    <inertial>
+      <origin xyz="0.020739 0.00204287 0.065966" rpy="0 0 0"/>
+      <mass value="0.147"/>
+      <inertia ixx="0.000136117" ixy="4.59787e-07" ixz="9.75275e-08" iyy="0.000114686" iyz="-4.97151e-06" izz="0.000130364"/>
+    </inertial>
+    <!-- Part base_motor_holder_so101_v1 -->
+    <visual>
+      <origin xyz="0.0206915 0.0221255 0.0300817" rpy="1.5708 -1.23909e-16 2.33147e-15"/>
+      <geometry>
+        <mesh filename="assets/base_motor_holder_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0206915 0.0221255 0.0300817" rpy="1.5708 -1.23909e-16 2.33147e-15"/>
+      <geometry>
+        <mesh filename="assets/base_motor_holder_so101_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part base_so101_v2 -->
+    <visual>
+      <origin xyz="0.0207909 0.0221255 0.0300817" rpy="1.5708 -0 0"/>
+      <geometry>
+        <mesh filename="assets/base_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0207909 0.0221255 0.0300817" rpy="1.5708 -0 0"/>
+      <geometry>
+        <mesh filename="assets/base_so101_v2.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part sts3215_03a_v1 -->
+    <visual>
+      <origin xyz="0.0207909 -0.0105745 0.0761817" rpy="-2.20282e-15 2.77556e-17 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0207909 -0.0105745 0.0761817" rpy="-2.20282e-15 2.77556e-17 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part waveshare_mounting_plate_so101_v2 -->
+    <visual>
+      <origin xyz="0.0205915 0.0467435 0.0798817" rpy="1.5708 -1.21716e-14 2.33147e-15"/>
+      <geometry>
+        <mesh filename="assets/waveshare_mounting_plate_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0205915 0.0467435 0.0798817" rpy="1.5708 -1.21716e-14 2.33147e-15"/>
+      <geometry>
+        <mesh filename="assets/waveshare_mounting_plate_so101_v2.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link shoulder -->
+  <link name="shoulder">
+    <inertial>
+      <origin xyz="-0.0307604 -1.66727e-05 -0.0252713" rpy="0 0 0"/>
+      <mass value="0.100006"/>
+      <inertia ixx="8.3759e-05" ixy="7.55525e-08" ixz="-1.16342e-06" iyy="8.10403e-05" iyz="1.54663e-07" izz="2.39783e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_2 -->
+    <visual>
+      <origin xyz="-0.0303992 0.000422241 -0.0417" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0303992 0.000422241 -0.0417" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part motor_holder_so101_base_v1 -->
+    <visual>
+      <origin xyz="-0.0675992 -0.000177759 0.0158499" rpy="1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_base_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0675992 -0.000177759 0.0158499" rpy="1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_base_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part rotation_pitch_so101_v1 -->
+    <visual>
+      <origin xyz="0.0122008 2.22413e-05 0.0464" rpy="-1.5708 -0 0"/>
+      <geometry>
+        <mesh filename="assets/rotation_pitch_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0122008 2.22413e-05 0.0464" rpy="-1.5708 -0 0"/>
+      <geometry>
+        <mesh filename="assets/rotation_pitch_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link upper_arm -->
+  <link name="upper_arm">
+    <inertial>
+      <origin xyz="-0.00838224 0.0898471 0.0184089" rpy="0 0 0"/>
+      <mass value="0.103"/>
+      <inertia ixx="0.000147318" ixy="1.97819e-05" ixz="8.97326e-09" iyy="4.08002e-05" iyz="4.03016e-08" izz="0.000142487"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_3 -->
+    <visual>
+      <origin xyz="-0.0155 0.11257 0.0187" rpy="-3.14159 -3.22659e-15 -3.14159"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0155 0.11257 0.0187" rpy="-3.14159 -3.22659e-15 -3.14159"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part upper_arm_so101_v1 -->
+    <visual>
+      <origin xyz="0.012 0.065085 0.0182" rpy="3.14159 -1.22125e-15 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/upper_arm_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.012 0.065085 0.0182" rpy="3.14159 -1.22125e-15 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/upper_arm_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link lower_arm -->
+  <link name="lower_arm">
+    <inertial>
+      <origin xyz="-0.00324376 -0.0980701 0.0182831" rpy="0 0 0"/>
+      <mass value="0.104"/>
+      <inertia ixx="0.000159844" ixy="-7.41152e-06" ixz="4.90188e-08" iyy="2.87438e-05" iyz="1.26409e-06" izz="0.00014529"/>
+    </inertial>
+    <!-- Part under_arm_so101_v1 -->
+    <visual>
+      <origin xyz="0.032 -0.0648499 0.0182" rpy="3.14159 -1.11022e-16 1.5708"/>
+      <geometry>
+        <mesh filename="assets/under_arm_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.032 -0.0648499 0.0182" rpy="3.14159 -1.11022e-16 1.5708"/>
+      <geometry>
+        <mesh filename="assets/under_arm_so101_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part motor_holder_so101_wrist_v1 -->
+    <visual>
+      <origin xyz="0.032 -0.0648499 0.018" rpy="-3.14159 -1.11022e-16 1.5708"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_wrist_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0.032 -0.0648499 0.018" rpy="-3.14159 -1.11022e-16 1.5708"/>
+      <geometry>
+        <mesh filename="assets/motor_holder_so101_wrist_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part sts3215_03a_v1_4 -->
+    <visual>
+      <origin xyz="-0.0052 -0.1224 0.0187" rpy="3.14159 -8.24341e-15 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="-0.0052 -0.1224 0.0187" rpy="3.14159 -8.24341e-15 -1.5708"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link wrist -->
+  <link name="wrist">
+    <inertial>
+      <origin xyz="-0.000103312 -0.0386143 0.0281156" rpy="0 0 0"/>
+      <mass value="0.079"/>
+      <inertia ixx="3.68263e-05" ixy="1.7893e-08" ixz="-5.28128e-08" iyy="2.5391e-05" iyz="3.6412e-06" izz="2.1e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_no_horn_v1 -->
+    <visual>
+      <origin xyz="0 -0.0424 0.0306" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_no_horn_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="0 -0.0424 0.0306" rpy="1.5708 1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_no_horn_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part wrist_roll_pitch_so101_v2 -->
+    <visual>
+      <origin xyz="-2.77556e-17 -0.028 0.0181" rpy="-1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_pitch_so101_v2.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="-2.77556e-17 -0.028 0.0181" rpy="-1.5708 -1.5708 0"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_pitch_so101_v2.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link gripper -->
+  <link name="gripper">
+    <inertial>
+      <origin xyz="0.000213627 0.000245138 -0.025187" rpy="0 0 0"/>
+      <mass value="0.087"/>
+      <inertia ixx="2.75087e-05" ixy="-3.35241e-07" ixz="-5.7352e-06" iyy="4.33657e-05" iyz="-5.17847e-08" izz="3.45059e-05"/>
+    </inertial>
+    <!-- Part sts3215_03a_v1_5 -->
+    <visual>
+      <origin xyz="0.0077 0.0001 -0.0234" rpy="-1.5708 -5.55112e-17 -1.38213e-14"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+      <material name="sts3215"/>
+    </visual>
+    <collision>
+      <origin xyz="0.0077 0.0001 -0.0234" rpy="-1.5708 -5.55112e-17 -1.38213e-14"/>
+      <geometry>
+        <mesh filename="assets/sts3215_03a_v1.stl"/>
+      </geometry>
+    </collision>
+    <!-- Part wrist_roll_follower_so101_v1 -->
+    <visual>
+      <origin xyz="1.11022e-16 -0.000218214 0.000949706" rpy="-3.14159 -5.55112e-17 -6.22813e-24"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_follower_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="1.11022e-16 -0.000218214 0.000949706" rpy="-3.14159 -5.55112e-17 -6.22813e-24"/>
+      <geometry>
+        <mesh filename="assets/wrist_roll_follower_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Link jaw -->
+  <link name="jaw">
+    <inertial>
+      <origin xyz="-0.00157495 -0.0300244 0.0192755" rpy="0 0 0"/>
+      <mass value="0.012"/>
+      <inertia ixx="6.61427e-06" ixy="-3.19807e-07" ixz="-5.90717e-09" iyy="1.89032e-06" iyz="-1.09945e-07" izz="5.28738e-06"/>
+    </inertial>
+    <!-- Part moving_jaw_so101_v1 -->
+    <visual>
+      <origin xyz="0 1.89351e-17 0.0189" rpy="9.53145e-17 -1.20743e-23 0"/>
+      <geometry>
+        <mesh filename="assets/moving_jaw_so101_v1.stl"/>
+      </geometry>
+      <material name="3d_printed"/>
+    </visual>
+    <collision>
+      <origin xyz="0 1.89351e-17 0.0189" rpy="9.53145e-17 -1.20743e-23 0"/>
+      <geometry>
+        <mesh filename="assets/moving_jaw_so101_v1.stl"/>
+      </geometry>
+    </collision>
+  </link>
+
+  <!-- Joint from gripper to jaw -->
+  <joint name="gripper" type="revolute">
+    <origin xyz="0.0202 0.0188 -0.0234" rpy="1.5708 -7.91661e-17 -1.0396e-16"/>
+    <parent link="gripper"/>
+    <child link="jaw"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-0.174533" upper="1.74533"/>
+  </joint>
+
+  <transmission name="gripper_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="gripper">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor6">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from wrist to gripper -->
+  <joint name="wrist_roll" type="revolute">
+    <origin xyz="2.77556e-17 -0.0611 0.0181" rpy="1.5708 -9.38083e-08 3.14159"/>
+    <parent link="wrist"/>
+    <child link="gripper"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-2.79253" upper="2.79253"/>
+  </joint>
+
+  <transmission name="wrist_roll_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_roll">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor5">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from lower_arm to wrist -->
+  <joint name="wrist_flex" type="revolute">
+    <origin xyz="-0.0052 -0.1349 3.40439e-16" rpy="-1.41553e-15 4.91611e-15 7.56157e-09"/>
+    <parent link="lower_arm"/>
+    <child link="wrist"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.65806" upper="1.65806"/>
+  </joint>
+
+  <transmission name="wrist_flex_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_flex">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor4">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from upper_arm to lower_arm -->
+  <joint name="elbow_flex" type="revolute">
+    <origin xyz="-0.028 0.11257 1.24466e-16" rpy="1.89432e-15 -3.22659e-15 -3.14159"/>
+    <parent link="upper_arm"/>
+    <child link="lower_arm"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-0.174533" upper="3.14159"/>
+  </joint>
+
+  <transmission name="elbow_flex_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="elbow_flex">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor3">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from shoulder to upper_arm -->
+  <joint name="shoulder_lift" type="revolute">
+    <origin xyz="-0.0303992 -0.0182778 -0.0542" rpy="-1.5708 1.5708 0"/>
+    <parent link="shoulder"/>
+    <child link="upper_arm"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-3.31613" upper="0.174533"/>
+  </joint>
+
+  <transmission name="shoulder_lift_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_lift">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor2">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+  <!-- Joint from base to shoulder -->
+  <joint name="shoulder_pan" type="revolute">
+    <origin xyz="0.0207909 -0.0230745 0.0948817" rpy="-3.14159 6.03684e-16 1.5708"/>
+    <parent link="base"/>
+    <child link="shoulder"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="10" velocity="10" lower="-1.91986" upper="1.91986"/>
+  </joint>
+
+  <transmission name="shoulder_pan_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_pan">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="motor1">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+
+</robot>

SO101/so101_old_calib.xml

@@ -0,0 +1,160 @@
+<?xml version="1.0" ?>
+<!-- Generated using onshape-to-robot -->
+<!-- Onshape https://cad.onshape.com/documents/7715cc284bb430fe6dab4ffd/w/4fd0791b683777b02f8d975a/e/bbd5da878b987933c7940f7d -->
+<mujoco model="so101_old_calib">
+  <compiler angle="radian" meshdir="assets" autolimits="true"/>
+  <default>
+    <default class="so101_old_calib">
+      <joint damping="1" frictionloss="0.1" armature="0.005"/>
+      <position kp="50"/>
+      <default class="visual">
+        <geom type="mesh" contype="0" conaffinity="0" group="2"/>
+      </default>
+      <default class="collision">
+        <geom group="3"/>
+      </default>
+    </default>
+  </default>
+  <!-- Additional joints_properties.xml -->
+  <default>
+    <default class="sts3215">
+      <geom contype="0" conaffinity="0"/>
+      <joint damping="0.60" frictionloss="0.052" armature="0.028"/>
+      <position kp="17.8"/>
+    </default>
+    <default class="backlash">
+      <!-- +/- 0.5° of backlash -->
+      <joint damping="0.01" frictionloss="0" armature="0.01" limited="true" range="-0.008726646259971648 0.008726646259971648"/>
+    </default>
+  </default>
+  <worldbody>
+    <!-- Link base -->
+    <body name="base" pos="0 0 0" quat="1 0 0 0" childclass="so101_old_calib">
+      <inertial pos="0.020739 0.00204287 0.065966" mass="0.147" fullinertia="0.000136117 0.000114686 0.000130364 4.59787e-07 9.75275e-08 -4.97151e-06"/>
+      <!-- Part base_motor_holder_so101_v1 -->
+      <geom type="mesh" class="visual" pos="0.0206915 0.0221255 0.0300817" quat="0.707107 0.707107 7.85046e-16 8.68107e-16" mesh="base_motor_holder_so101_v1" material="base_motor_holder_so101_v1_material"/>
+      <!-- Part base_so101_v2 -->
+      <geom type="mesh" class="visual" pos="0.0207909 0.0221255 0.0300817" quat="0.707107 0.707107 -0 -0" mesh="base_so101_v2" material="base_so101_v2_material"/>
+      <!-- Part sts3215_03a_v1 -->
+      <geom type="mesh" class="visual" pos="0.0207909 -0.0105745 0.0761817" quat="0.707107 -7.69919e-16 8.95976e-16 -0.707107" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+      <!-- Part waveshare_mounting_plate_so101_v2 -->
+      <geom type="mesh" class="visual" pos="0.0205915 0.0467435 0.0798817" quat="0.707107 0.707107 -3.34318e-15 5.1276e-15" mesh="waveshare_mounting_plate_so101_v2" material="waveshare_mounting_plate_so101_v2_material"/>
+      <!-- Frame base -->
+      <site group="3" name="base" pos="0.020791 0.0157608 0.0324817" quat="0 1 0 0"/>
+      <!-- Link shoulder -->
+      <body name="shoulder" pos="0.0207909 -0.0230745 0.0948817" quat="7.88629e-16 -0.707107 -0.707107 7.69003e-16">
+        <!-- Joint from base to shoulder -->
+        <joint axis="0 0 1" name="shoulder_pan" type="hinge" range="-1.9198621771937616 1.9198621771937634" class="sts3215"/>
+        <inertial pos="-0.0307604 -1.66727e-05 -0.0252713" mass="0.100006" fullinertia="8.3759e-05 8.10403e-05 2.39783e-05 7.55525e-08 -1.16342e-06 1.54663e-07"/>
+        <!-- Part sts3215_03a_v1_2 -->
+        <geom type="mesh" class="visual" pos="-0.0303992 0.000422241 -0.0417" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+        <geom type="mesh" class="collision" pos="-0.0303992 0.000422241 -0.0417" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+        <!-- Part motor_holder_so101_base_v1 -->
+        <geom type="mesh" class="visual" pos="-0.0675992 -0.000177759 0.0158499" quat="0.5 0.5 -0.5 0.5" mesh="motor_holder_so101_base_v1" material="motor_holder_so101_base_v1_material"/>
+        <geom type="mesh" class="collision" pos="-0.0675992 -0.000177759 0.0158499" quat="0.5 0.5 -0.5 0.5" mesh="motor_holder_so101_base_v1" material="motor_holder_so101_base_v1_material"/>
+        <!-- Part rotation_pitch_so101_v1 -->
+        <geom type="mesh" class="visual" pos="0.0122008 2.22413e-05 0.0464" quat="0.707107 -0.707107 0 0" mesh="rotation_pitch_so101_v1" material="rotation_pitch_so101_v1_material"/>
+        <geom type="mesh" class="collision" pos="0.0122008 2.22413e-05 0.0464" quat="0.707107 -0.707107 0 0" mesh="rotation_pitch_so101_v1" material="rotation_pitch_so101_v1_material"/>
+        <!-- Link upper_arm -->
+        <body name="upper_arm" pos="-0.0303992 -0.0182778 -0.0542" quat="0.5 -0.5 0.5 0.5">
+          <!-- Joint from shoulder to upper_arm -->
+          <joint axis="0 0 1" name="shoulder_lift" type="hinge" range="-3.31612557878923 0.1745329251994294" class="sts3215"/>
+          <inertial pos="-0.00838224 0.0898471 0.0184089" mass="0.103" fullinertia="0.000147318 4.08002e-05 0.000142487 1.97819e-05 8.97326e-09 4.03016e-08"/>
+          <!-- Part sts3215_03a_v1_3 -->
+          <geom type="mesh" class="visual" pos="-0.0155 0.11257 0.0187" quat="4.91381e-16 3.1572e-16 -1 6.21545e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+          <geom type="mesh" class="collision" pos="-0.0155 0.11257 0.0187" quat="4.91381e-16 3.1572e-16 -1 6.21545e-16" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+          <!-- Part upper_arm_so101_v1 -->
+          <geom type="mesh" class="visual" pos="0.012 0.065085 0.0182" quat="5.77339e-30 0.707107 -0.707107 -1.0267e-29" mesh="upper_arm_so101_v1" material="upper_arm_so101_v1_material"/>
+          <geom type="mesh" class="collision" pos="0.012 0.065085 0.0182" quat="5.77339e-30 0.707107 -0.707107 -1.0267e-29" mesh="upper_arm_so101_v1" material="upper_arm_so101_v1_material"/>
+          <!-- Link lower_arm -->
+          <body name="lower_arm" pos="-0.028 0.11257 1.24466e-16" quat="2.34133e-16 -3.33458e-16 -3.62568e-16 -1">
+            <!-- Joint from upper_arm to lower_arm -->
+            <joint axis="0 0 1" name="elbow_flex" type="hinge" range="-0.17453292519941607 3.14159265358981" class="sts3215"/>
+            <inertial pos="-0.00324376 -0.0980701 0.0182831" mass="0.104" fullinertia="0.000159844 2.87438e-05 0.00014529 -7.41152e-06 4.90188e-08 1.26409e-06"/>
+            <!-- Part under_arm_so101_v1 -->
+            <geom type="mesh" class="visual" pos="0.032 -0.0648499 0.0182" quat="7.0875e-26 0.707107 0.707107 -7.0875e-26" mesh="under_arm_so101_v1" material="under_arm_so101_v1_material"/>
+            <geom type="mesh" class="collision" pos="0.032 -0.0648499 0.0182" quat="7.0875e-26 0.707107 0.707107 -7.0875e-26" mesh="under_arm_so101_v1" material="under_arm_so101_v1_material"/>
+            <!-- Part motor_holder_so101_wrist_v1 -->
+            <geom type="mesh" class="visual" pos="0.032 -0.0648499 0.018" quat="1.01856e-15 -0.707107 -0.707107 2.26153e-16" mesh="motor_holder_so101_wrist_v1" material="motor_holder_so101_wrist_v1_material"/>
+            <geom type="mesh" class="collision" pos="0.032 -0.0648499 0.018" quat="1.01856e-15 -0.707107 -0.707107 2.26153e-16" mesh="motor_holder_so101_wrist_v1" material="motor_holder_so101_wrist_v1_material"/>
+            <!-- Part sts3215_03a_v1_4 -->
+            <geom type="mesh" class="visual" pos="-0.0052 -0.1224 0.0187" quat="1.64704e-15 0.707107 -0.707107 1.29806e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+            <geom type="mesh" class="collision" pos="-0.0052 -0.1224 0.0187" quat="1.64704e-15 0.707107 -0.707107 1.29806e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+            <!-- Link wrist -->
+            <body name="wrist" pos="-0.0052 -0.1349 3.40439e-16" quat="1 -3.94784e-16 1.66357e-15 3.78078e-09">
+              <!-- Joint from lower_arm to wrist -->
+              <joint axis="0 0 1" name="wrist_flex" type="hinge" range="-1.6580627969561947 1.6580627818330316" class="sts3215"/>
+              <inertial pos="-0.000103312 -0.0386143 0.0281156" mass="0.079" fullinertia="3.68263e-05 2.5391e-05 2.1e-05 1.7893e-08 -5.28128e-08 3.6412e-06"/>
+              <!-- Part sts3215_03a_no_horn_v1 -->
+              <geom type="mesh" class="visual" pos="0 -0.0424 0.0306" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_no_horn_v1" material="sts3215_03a_no_horn_v1_material"/>
+              <geom type="mesh" class="collision" pos="0 -0.0424 0.0306" quat="0.5 0.5 0.5 -0.5" mesh="sts3215_03a_no_horn_v1" material="sts3215_03a_no_horn_v1_material"/>
+              <!-- Part wrist_roll_pitch_so101_v2 -->
+              <geom type="mesh" class="visual" pos="-2.77556e-17 -0.028 0.0181" quat="0.5 -0.5 -0.5 -0.5" mesh="wrist_roll_pitch_so101_v2" material="wrist_roll_pitch_so101_v2_material"/>
+              <geom type="mesh" class="collision" pos="-2.77556e-17 -0.028 0.0181" quat="0.5 -0.5 -0.5 -0.5" mesh="wrist_roll_pitch_so101_v2" material="wrist_roll_pitch_so101_v2_material"/>
+              <!-- Link gripper -->
+              <body name="gripper" pos="2.77556e-17 -0.0611 0.0181" quat="3.31663e-08 -3.31663e-08 -0.707107 -0.707107">
+                <!-- Joint from wrist to gripper -->
+                <joint axis="0 0 1" name="wrist_roll" type="hinge" range="-2.7925268969992394 2.792526709382615" class="sts3215"/>
+                <inertial pos="0.000213627 0.000245138 -0.025187" mass="0.087" fullinertia="2.75087e-05 4.33657e-05 3.45059e-05 -3.35241e-07 -5.7352e-06 -5.17847e-08"/>
+                <!-- Part sts3215_03a_v1_5 -->
+                <geom type="mesh" class="visual" pos="0.0077 0.0001 -0.0234" quat="0.707107 -0.707107 6.48145e-15 1.60424e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+                <geom type="mesh" class="collision" pos="0.0077 0.0001 -0.0234" quat="0.707107 -0.707107 6.48145e-15 1.60424e-15" mesh="sts3215_03a_v1" material="sts3215_03a_v1_material"/>
+                <!-- Part wrist_roll_follower_so101_v1 -->
+                <geom type="mesh" class="visual" pos="1.11022e-16 -0.000218214 0.000949706" quat="0 1 0 0" mesh="wrist_roll_follower_so101_v1" material="wrist_roll_follower_so101_v1_material"/>
+                <geom type="mesh" class="collision" pos="1.11022e-16 -0.000218214 0.000949706" quat="0 1 0 0" mesh="wrist_roll_follower_so101_v1" material="wrist_roll_follower_so101_v1_material"/>
+                <!-- Frame gripper -->
+                <site group="3" name="gripper" pos="-0.0079 -0.000218121 -0.0981274" quat="0.5 -0.5 0.5 -0.5"/>
+                <!-- Link moving_jaw_so101_v1 -->
+                <body name="moving_jaw_so101_v1" pos="0.0202 0.0188 -0.0234" quat="0.707107 0.707107 0 -4.88629e-17">
+                  <!-- Joint from gripper to moving_jaw_so101_v1 -->
+                  <joint axis="0 0 1" name="gripper" type="hinge" range="-0.17453292519941963 1.7453292519943429" class="sts3215"/>
+                  <inertial pos="-0.00157495 -0.0300244 0.0192755" mass="0.012" fullinertia="6.61427e-06 1.89032e-06 5.28738e-06 -3.19807e-07 -5.90717e-09 -1.09945e-07"/>
+                  <!-- Part moving_jaw_so101_v1 -->
+                  <geom type="mesh" class="visual" pos="0 1.89351e-17 0.0189" quat="1 0 1.11022e-16 8.14512e-24" mesh="moving_jaw_so101_v1" material="moving_jaw_so101_v1_material"/>
+                  <geom type="mesh" class="collision" pos="0 1.89351e-17 0.0189" quat="1 0 1.11022e-16 8.14512e-24" mesh="moving_jaw_so101_v1" material="moving_jaw_so101_v1_material"/>
+                </body>
+              </body>
+            </body>
+          </body>
+        </body>
+      </body>
+    </body>
+  </worldbody>
+  <asset>
+    <mesh file="motor_holder_so101_wrist_v1.stl"/>
+    <mesh file="moving_jaw_so101_v1.stl"/>
+    <mesh file="wrist_roll_follower_so101_v1.stl"/>
+    <mesh file="rotation_pitch_so101_v1.stl"/>
+    <mesh file="base_so101_v2.stl"/>
+    <mesh file="motor_holder_so101_base_v1.stl"/>
+    <mesh file="upper_arm_so101_v1.stl"/>
+    <mesh file="sts3215_03a_v1.stl"/>
+    <mesh file="under_arm_so101_v1.stl"/>
+    <mesh file="waveshare_mounting_plate_so101_v2.stl"/>
+    <mesh file="base_motor_holder_so101_v1.stl"/>
+    <mesh file="wrist_roll_pitch_so101_v2.stl"/>
+    <mesh file="sts3215_03a_no_horn_v1.stl"/>
+    <material name="base_motor_holder_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="base_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="sts3215_03a_v1_material" rgba="0.1 0.1 0.1 1"/>
+    <material name="waveshare_mounting_plate_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="motor_holder_so101_base_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="rotation_pitch_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="upper_arm_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="under_arm_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="motor_holder_so101_wrist_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="sts3215_03a_no_horn_v1_material" rgba="0.1 0.1 0.1 1"/>
+    <material name="wrist_roll_pitch_so101_v2_material" rgba="1 0.82 0.12 1"/>
+    <material name="wrist_roll_follower_so101_v1_material" rgba="1 0.82 0.12 1"/>
+    <material name="moving_jaw_so101_v1_material" rgba="1 0.82 0.12 1"/>
+  </asset>
+  <actuator>
+    <position class="sts3215" name="shoulder_pan" joint="shoulder_pan" forcerange="-3.35 3.35" ctrlrange="-1.91986 1.91986"/>
+    <position class="sts3215" name="shoulder_lift" joint="shoulder_lift" forcerange="-3.35 3.35" ctrlrange="-3.31612 0.17453"/>
+    <position class="sts3215" name="elbow_flex" joint="elbow_flex" forcerange="-3.35 3.35" ctrlrange="-0.17453 3.14159"/>
+    <position class="sts3215" name="wrist_flex" joint="wrist_flex" forcerange="-3.35 3.35" ctrlrange="-1.65806 1.65806"/>
+    <position class="sts3215" name="wrist_roll" joint="wrist_roll" forcerange="-3.35 3.35" ctrlrange="-2.79252 2.79252"/>
+    <position class="sts3215" name="gripper" joint="gripper" forcerange="-3.35 3.35" ctrlrange="-0.17453 1.74533"/>
+  </actuator>
+  <equality/>
+</mujoco>