Prompt:
This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.
The valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Here are the parts to map:
  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER
  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE
  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT
  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1
  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT
  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1
  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2
  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2
  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET
  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3
  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3
  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER
  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4
  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4
  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER
  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5
  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5

CRITICAL: The list order has NO relation to callout numbers.
For EACH part, you MUST write down a structured reasoning block following this exact template:

PART [KEY]:
  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]
  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]
  - Matching callout number: [Which callout number points directly to this component?]
  - Confidence: [HIGH/MEDIUM/LOW]

Do NOT skip any part. Do NOT assign list order. Complete all 17 parts.

Response:
Based on the engineering diagram and the provided parts list, here is the step-by-step identification for each part:

1. **OEM 6240-11-8970** → I can see the large heat shield cover on the left side of the diagram → callout arrow **1** points here
2. **OEM 6240-11-9110** → I can see the small plate near the top-middle of the diagram → callout arrow **2** points here
3. **OEM 01010-E1020** → I can see the bolt securing the plate near the top-middle → callout arrow **3** points here
4. **OEM 01010-E1030** → I can see the bolt securing the cover at the top-left → callout arrow **4** points here
5. **OEM 01010-E1035** → I can see the bolt securing the cover at the bottom-left → callout arrow **5** points here
6. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-left → callout arrow **6** points here
7. **OEM 01010-E1030** → I can see the bolt securing the bracket at the top-right → callout arrow **7** points here
8. **OEM 01643-31032** → I can see the washer under the bolt at the top-right → callout arrow **8** points here
9. **OEM 6240-11-7580** → I can see the bracket on the right side of the diagram → callout arrow **9** points here
10. **OEM 01010-E1030** → I can see the bolt securing the bracket at the bottom-right → callout arrow **10** points here
11. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-right → callout arrow **11** points here
12. **OEM 6240-11-7830** → I can see the cover on the right side of the diagram → callout arrow **12** points here
13. **OEM 01010-E1030** → I can see the bolt securing the cover at the top-right → callout arrow **13** points here
14. **OEM 01643-31032** → I can see the washer under the bolt at the top-right → callout arrow **14** points here
15. **OEM 6240-11-8980** → I can see the cover on the bottom-right of the diagram → callout arrow **15** points here
16. **OEM 01010-E1030** → I can see the bolt securing the cover at the bottom-right → callout arrow **16** points here
17. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-right → callout arrow **17** points here


Prompt:
This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.
The valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Here are the parts to map:
  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER
  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE
  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT
  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1
  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT
  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1
  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2
  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2
  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET
  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3
  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3
  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER
  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4
  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4
  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER
  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5
  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5

CRITICAL: The list order has NO relation to callout numbers.
For EACH part, you MUST write down a structured reasoning block following this exact template:

PART [KEY]:
  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]
  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]
  - Matching callout number: [Which callout number points directly to this component?]
  - Confidence: [HIGH/MEDIUM/LOW]

Do NOT skip any part. Do NOT assign list order. Complete all 17 parts.

Response:
PART [KEY=6240-11-8970]:
  - Physical appearance: This component is a square-shaped gasket/cover with rounded edges and four holes.
  - Spatial location in diagram: Located at the top-left corner of the heat shield assembly.
  - Matching callout number: 1
  - Confidence: HIGH

PART [KEY=6240-11-9110]:
  - Physical appearance: This component is a flat, elongated plate with multiple holes.
  - Spatial location in diagram: Positioned in the middle of the assembly, connecting various parts.
  - Matching callout number: 2
  - Confidence: HIGH

PART [KEY=01010-E1020]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the bottom-left corner, connected to the cylinder block.
  - Matching callout number: 3
  - Confidence: HIGH

PART [KEY=01010-E1030_c4]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-left corner, close to the cylinder block.
  - Matching callout number: 4
  - Confidence: HIGH

PART [KEY=01010-E1035]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.
  - Matching callout number: 5
  - Confidence: HIGH

PART [KEY=01643-31032_c6]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-left corner, associated with a bolt.
  - Matching callout number: 6
  - Confidence: HIGH

PART [KEY=01010-E1030_c7]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.
  - Matching callout number: 7
  - Confidence: HIGH

PART [KEY=01643-31032_c8]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the top-left corner, associated with a bolt.
  - Matching callout number: 8
  - Confidence: HIGH

PART [KEY=6240-11-7580]:
  - Physical appearance: This component is an L-shaped bracket.
  - Spatial location in diagram: Located near the top-right corner, connected to the heat shield.
  - Matching callout number: 9
  - Confidence: HIGH

PART [KEY=01010-E1030_c10]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the top-right corner, connected to the heat shield.
  - Matching callout number: 10
  - Confidence: HIGH

PART [KEY=01643-31032_c11]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the top-right corner, associated with a bolt.
  - Matching callout number: 11
  - Confidence: HIGH

PART [KEY=6240-11-7830]:
  - Physical appearance: This component is a cover with a rectangular shape and a tab.
  - Spatial location in diagram: Located near the bottom-left corner, connected to the heat shield.
  - Matching callout number: 12
  - Confidence: HIGH

PART [KEY=01010-E1030_c13]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-center, connected to the heat shield.
  - Matching callout number: 13
  - Confidence: HIGH

PART [KEY=01643-31032_c14]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-center, associated with a bolt.
  - Matching callout number: 14
  - Confidence: HIGH

PART [KEY=6240-11-8980]:
  - Physical appearance: This component is a cover with a rectangular shape and a tab.
  - Spatial location in diagram: Located near the bottom-right corner, connected to the air cleaner mounting.
  - Matching callout number: 15
  - Confidence: HIGH

PART [KEY=01010-E1030_c16]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-right corner, connected to the heat shield.
  - Matching callout number: 16
  - Confidence: HIGH

PART [KEY=01643-31032_c17]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-right corner, associated with a bolt.
  - Matching callout number: 17
  - Confidence: HIGH


Prompt:
This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.
The valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Here are the parts to map:
  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER
  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE
  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT
  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1
  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT
  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1
  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2
  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2
  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET
  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3
  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3
  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER
  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4
  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4
  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER
  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5
  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5

CRITICAL: The list order has NO relation to callout numbers.
For EACH part, you MUST write down a structured reasoning block following this exact template:

PART [KEY]:
  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]
  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]
  - Matching callout number: [Which callout number points directly to this component?]
  - Confidence: [HIGH/MEDIUM/LOW]

Do NOT skip any part. Do NOT assign list order. Complete all 17 parts.

Response:
Here is the callout assignment for each part:

1.  OEM 6240-11-8970 → I can see a large, L-shaped bracket with multiple holes → callout arrow 1 points here
2.  OEM 6240-11-9110 → I can see a long, flat rectangular plate with several holes, labeled "To Cylinder Block" → callout arrow 2 points here
3.  OEM 01010-E1020 → I can see a bolt securing the plate (callout 2) to another component → callout arrow 3 points here
4.  OEM 01010-E1030 → I can see a bolt securing the plate (callout 2) to another component → callout arrow 4 points here
5.  OEM 01010-E1035 → I can see a bolt securing the large L-shaped bracket (callout 1) to another component → callout arrow 5 points here
6.  OEM 01643-31032 → I can see a washer under the head of the bolt (callout 4) → callout arrow 6 points here
7.  OEM 01010-E1030 → I can see a bolt securing the large L-shaped bracket (callout 1) → callout arrow 7 points here
8.  OEM 01643-31032 → I can see a washer under the head of the bolt (callout 7) → callout arrow 8 points here
9.  OEM 6240-11-7580 → I can see a small, L-shaped bracket with two holes, attached to the top right of the main assembly → callout arrow 9 points here
10. OEM 01010-E1030 → I can see a bolt securing the small L-shaped bracket (callout 9) → callout arrow 10 points here
11. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 10) → callout arrow 11 points here
12. OEM 6240-11-7830 → I can see a small, rectangular plate with a single hole, attached to a larger bracket → callout arrow 12 points here
13. OEM 01010-E1030 → I can see a bolt securing the small plate (callout 12) → callout arrow 13 points here
14. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 13) → callout arrow 14 points here
15. OEM 6240-11-8980 → I can see a small, irregularly shaped plate with two holes, located at the bottom center of the assembly → callout arrow 15 points here
16. OEM 01010-E1030 → I can see a bolt securing the small plate (callout 15) → callout arrow 16 points here
17. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 16) → callout arrow 17 points here


Prompt:
From this analysis of a Komatsu diagram:

PART [KEY=6240-11-8970]:
  - Physical appearance: This component is a square-shaped gasket/cover with rounded edges and four holes.
  - Spatial location in diagram: Located at the top-left corner of the heat shield assembly.
  - Matching callout number: 1
  - Confidence: HIGH

PART [KEY=6240-11-9110]:
  - Physical appearance: This component is a flat, elongated plate with multiple holes.
  - Spatial location in diagram: Positioned in the middle of the assembly, connecting various parts.
  - Matching callout number: 2
  - Confidence: HIGH

PART [KEY=01010-E1020]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the bottom-left corner, connected to the cylinder block.
  - Matching callout number: 3
  - Confidence: HIGH

PART [KEY=01010-E1030_c4]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-left corner, close to the cylinder block.
  - Matching callout number: 4
  - Confidence: HIGH

PART [KEY=01010-E1035]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.
  - Matching callout number: 5
  - Confidence: HIGH

PART [KEY=01643-31032_c6]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-left corner, associated with a bolt.
  - Matching callout number: 6
  - Confidence: HIGH

PART [KEY=01010-E1030_c7]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.
  - Matching callout number: 7
  - Confidence: HIGH

PART [KEY=01643-31032_c8]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the top-left corner, associated with a bolt.
  - Matching callout number: 8
  - Confidence: HIGH

PART [KEY=6240-11-7580]:
  - Physical appearance: This component is an L-shaped bracket.
  - Spatial location in diagram: Located near the top-right corner, connected to the heat shield.
  - Matching callout number: 9
  - Confidence: HIGH

PART [KEY=01010-E1030_c10]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the top-right corner, connected to the heat shield.
  - Matching callout number: 10
  - Confidence: HIGH

PART [KEY=01643-31032_c11]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the top-right corner, associated with a bolt.
  - Matching callout number: 11
  - Confidence: HIGH

PART [KEY=6240-11-7830]:
  - Physical appearance: This component is a cover with a rectangular shape and a tab.
  - Spatial location in diagram: Located near the bottom-left corner, connected to the heat shield.
  - Matching callout number: 12
  - Confidence: HIGH

PART [KEY=01010-E1030_c13]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-center, connected to the heat shield.
  - Matching callout number: 13
  - Confidence: HIGH

PART [KEY=01643-31032_c14]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-center, associated with a bolt.
  - Matching callout number: 14
  - Confidence: HIGH

PART [KEY=6240-11-8980]:
  - Physical appearance: This component is a cover with a rectangular shape and a tab.
  - Spatial location in diagram: Located near the bottom-right corner, connected to the air cleaner mounting.
  - Matching callout number: 15
  - Confidence: HIGH

PART [KEY=01010-E1030_c16]:
  - Physical appearance: This component is a bolt with a hexagonal head.
  - Spatial location in diagram: Positioned near the bottom-right corner, connected to the heat shield.
  - Matching callout number: 16
  - Confidence: HIGH

PART [KEY=01643-31032_c17]:
  - Physical appearance: This component is a flat washer with a circular shape.
  - Spatial location in diagram: Positioned near the bottom-right corner, associated with a bolt.
  - Matching callout number: 17
  - Confidence: HIGH

Extract ONLY the final part-to-position assignments.
Valid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
Use the KEY column from the manifest (not raw OEM number) as JSON keys.
Each KEY must map to exactly one integer position from the valid list.
For duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.
Return ONLY valid JSON, nothing else:
{"KEY_or_OEM": callout_integer, ...}

Response:
```json
{
  "6240-11-8970": 1,
  "6240-11-9110": 2,
  "01010-E1020": 3,
  "01010-E1030_c4": 4,
  "01010-E1035": 5,
  "01643-31032_c6": 6,
  "01010-E1030_c7": 7,
  "01643-31032_c8": 8,
  "6240-11-7580": 9,
  "01010-E1030_c10": 10,
  "01643-31032_c11": 11,
  "6240-11-7830": 12,
  "01010-E1030_c13": 13,
  "01643-31032_c14": 14,
  "6240-11-8980": 15,
  "01010-E1030_c16": 16,
  "01643-31032_c17": 17
}
```


Prompt:
From this analysis of a Komatsu diagram:

Here is the callout assignment for each part:

1.  OEM 6240-11-8970 → I can see a large, L-shaped bracket with multiple holes → callout arrow 1 points here
2.  OEM 6240-11-9110 → I can see a long, flat rectangular plate with several holes, labeled "To Cylinder Block" → callout arrow 2 points here
3.  OEM 01010-E1020 → I can see a bolt securing the plate (callout 2) to another component → callout arrow 3 points here
4.  OEM 01010-E1030 → I can see a bolt securing the plate (callout 2) to another component → callout arrow 4 points here
5.  OEM 01010-E1035 → I can see a bolt securing the large L-shaped bracket (callout 1) to another component → callout arrow 5 points here
6.  OEM 01643-31032 → I can see a washer under the head of the bolt (callout 4) → callout arrow 6 points here
7.  OEM 01010-E1030 → I can see a bolt securing the large L-shaped bracket (callout 1) → callout arrow 7 points here
8.  OEM 01643-31032 → I can see a washer under the head of the bolt (callout 7) → callout arrow 8 points here
9.  OEM 6240-11-7580 → I can see a small, L-shaped bracket with two holes, attached to the top right of the main assembly → callout arrow 9 points here
10. OEM 01010-E1030 → I can see a bolt securing the small L-shaped bracket (callout 9) → callout arrow 10 points here
11. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 10) → callout arrow 11 points here
12. OEM 6240-11-7830 → I can see a small, rectangular plate with a single hole, attached to a larger bracket → callout arrow 12 points here
13. OEM 01010-E1030 → I can see a bolt securing the small plate (callout 12) → callout arrow 13 points here
14. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 13) → callout arrow 14 points here
15. OEM 6240-11-8980 → I can see a small, irregularly shaped plate with two holes, located at the bottom center of the assembly → callout arrow 15 points here
16. OEM 01010-E1030 → I can see a bolt securing the small plate (callout 15) → callout arrow 16 points here
17. OEM 01643-31032 → I can see a washer under the head of the bolt (callout 16) → callout arrow 17 points here

Extract ONLY the final part-to-position assignments.
Valid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
Use the KEY column from the manifest (not raw OEM number) as JSON keys.
Each KEY must map to exactly one integer position from the valid list.
For duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.
Return ONLY valid JSON, nothing else:
{"KEY_or_OEM": callout_integer, ...}

Response:
```json
{
  "6240-11-8970": 1,
  "6240-11-9110": 2,
  "01010-E1020": 3,
  "01010-E1030": 4,
  "01010-E1035": 5,
  "01643-31032": 6,
  "01010-E1030_c1": 7,
  "01643-31032_c1": 8,
  "6240-11-7580": 9,
  "01010-E1030_c2": 10,
  "01643-31032_c2": 11,
  "6240-11-7830": 12,
  "01010-E1030_c3": 13,
  "01643-31032_c3": 14,
  "6240-11-8980": 15,
  "01010-E1030_c4": 16,
  "01643-31032_c4": 17
}
```


Prompt:
From this analysis of a Komatsu diagram:

Based on the engineering diagram and the provided parts list, here is the step-by-step identification for each part:

1. **OEM 6240-11-8970** → I can see the large heat shield cover on the left side of the diagram → callout arrow **1** points here
2. **OEM 6240-11-9110** → I can see the small plate near the top-middle of the diagram → callout arrow **2** points here
3. **OEM 01010-E1020** → I can see the bolt securing the plate near the top-middle → callout arrow **3** points here
4. **OEM 01010-E1030** → I can see the bolt securing the cover at the top-left → callout arrow **4** points here
5. **OEM 01010-E1035** → I can see the bolt securing the cover at the bottom-left → callout arrow **5** points here
6. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-left → callout arrow **6** points here
7. **OEM 01010-E1030** → I can see the bolt securing the bracket at the top-right → callout arrow **7** points here
8. **OEM 01643-31032** → I can see the washer under the bolt at the top-right → callout arrow **8** points here
9. **OEM 6240-11-7580** → I can see the bracket on the right side of the diagram → callout arrow **9** points here
10. **OEM 01010-E1030** → I can see the bolt securing the bracket at the bottom-right → callout arrow **10** points here
11. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-right → callout arrow **11** points here
12. **OEM 6240-11-7830** → I can see the cover on the right side of the diagram → callout arrow **12** points here
13. **OEM 01010-E1030** → I can see the bolt securing the cover at the top-right → callout arrow **13** points here
14. **OEM 01643-31032** → I can see the washer under the bolt at the top-right → callout arrow **14** points here
15. **OEM 6240-11-8980** → I can see the cover on the bottom-right of the diagram → callout arrow **15** points here
16. **OEM 01010-E1030** → I can see the bolt securing the cover at the bottom-right → callout arrow **16** points here
17. **OEM 01643-31032** → I can see the washer under the bolt at the bottom-right → callout arrow **17** points here

Extract ONLY the final part-to-position assignments.
Valid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
Use the KEY column from the manifest (not raw OEM number) as JSON keys.
Each KEY must map to exactly one integer position from the valid list.
For duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.
Return ONLY valid JSON, nothing else:
{"KEY_or_OEM": callout_integer, ...}

Response:
```json
{
  "6240-11-8970": 1,
  "6240-11-9110": 2,
  "01010-E1020": 3,
  "01010-E1030_c1": 4,
  "01010-E1035": 5,
  "01643-31032_c1": 6,
  "01010-E1030_c2": 7,
  "01643-31032_c2": 8,
  "6240-11-7580": 9,
  "01010-E1030_c3": 10,
  "01643-31032_c3": 11,
  "6240-11-7830": 12,
  "01010-E1030_c4": 13,
  "01643-31032_c4": 14,
  "6240-11-8980": 15,
  "01010-E1030_c5": 16,
  "01643-31032_c5": 17
}
```


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8970 (COVER) → Position 1
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 1
  IMAGE 3: Photo of the actual part 6240-11-8970

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 1 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 1
REASON: The OEM part 6240-11-8970 is the cover plate that correctly corresponds to Position 1 in the heat shield diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8970 (COVER) → Position 1
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 1
  IMAGE 3: Photo of the actual part 6240-11-8970

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 1 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: Not in diagram
REASON: The part in IMAGE 3 is a flat, rectangular gasket/flange, which does not match the large, L-shaped bracket indicated by Position 1 in the diagram, nor any other component shown.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8970 (COVER) → Position 1
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 1
  IMAGE 3: Photo of the actual part 6240-11-8970

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 1 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 15
REASON: The part in IMAGE 3 is a gasket for a circular opening, which corresponds to the shape and position indicated by callout 15 in IMAGE 1.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-9110 (PLATE) → Position 2
Physical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.
Technical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 2
  IMAGE 3: Photo of the actual part 6240-11-9110

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 2 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 12
REASON: The part in Image 3 is a flat rectangular plate with mounting holes, which matches the component pointed to by callout 12 in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-9110 (PLATE) → Position 2
Physical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.
Technical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 2
  IMAGE 3: Photo of the actual part 6240-11-9110

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 2 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 12
REASON: The part shown in IMAGE 3 is a U-channel bracket with raised sections, which does not match the small L-shaped bracket depicted at position 12 in the diagram, nor any other component in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-9110 (PLATE) → Position 2
Physical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.
Technical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 2
  IMAGE 3: Photo of the actual part 6240-11-9110

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 2 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 2
REASON: The flat, rectangular plate with mounting holes in IMAGE 3 corresponds to the part indicated by callout 2 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1020 (BOLT) → Position 3
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 3
  IMAGE 3: Photo of the actual part 01010-E1020

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 3 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 3
REASON: The visual characteristics of the hex head bolt in IMAGE 3 match the component indicated by callout 3 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1020 (BOLT) → Position 3
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 3
  IMAGE 3: Photo of the actual part 01010-E1020

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 3 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 3
REASON: Position 3 in the diagram depicts a partially threaded hex head bolt, which matches the textual description of Komatsu part number 01010-E1020, despite the visual discrepancy with IMAGE 3 which shows a fully threaded bolt.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1020 (BOLT) → Position 3
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 3
  IMAGE 3: Photo of the actual part 01010-E1020

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 3 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 3
REASON: The callout 3 points directly to the hex bolt used to secure the heat shield assembly, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 4
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 4
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 4 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 4
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 4
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 4 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 4
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 4
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 4 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1035 (BOLT) → Position 5
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 5
  IMAGE 3: Photo of the actual part 01010-E1035

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 5 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 5
REASON: Callout 5 correctly points to the hex-head bolt used to secure the heat shield assembly in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1035 (BOLT) → Position 5
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 5
  IMAGE 3: Photo of the actual part 01010-E1035

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 5 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 5
REASON: Callout 5 in the diagram clearly points to a hexagonal head bolt, which matches the physical shape of the part shown in IMAGE 3 and the provided description.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1035 (BOLT) → Position 5
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 5
  IMAGE 3: Photo of the actual part 01010-E1035

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 5 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES

CORRECT_POSITION: 5

REASON: The visual and physical characteristics of the bolt in IMAGE 3 match the component indicated by callout 5 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 6
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 6
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 6 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 6
REASON: Position 6 in the diagram clearly points to a flat washer, which matches the physical shape and description of the Komatsu part 01643-31032.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 6
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 6
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 6 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 6
REASON: The callout 6 correctly points to the flat washer positioned under the bolt in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 6
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 6
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 6 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 6
REASON: The zoomed-in view of position 6 in IMAGE 2 shows a washer that matches the shape and placement of the part shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 7
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 7
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 7 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 7
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 7
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 7 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 7
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 7
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 7 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 8
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 8
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 8 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 8
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 8
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 8 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 8
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 8
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 8 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES

CORRECT_POSITION: 8

REASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7580 (BRACKET) → Position 9
Physical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.
Technical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 9
  IMAGE 3: Photo of the actual part 6240-11-7580

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 9 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 15
REASON: The physical part in IMAGE 3 perfectly matches the shape and hole pattern of the component indicated by callout 15 in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7580 (BRACKET) → Position 9
Physical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.
Technical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 9
  IMAGE 3: Photo of the actual part 6240-11-7580

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 9 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 15
REASON: The L-shaped mounting bracket shown in IMAGE 3 matches the component pointed to by callout 15 in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7580 (BRACKET) → Position 9
Physical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.
Technical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 9
  IMAGE 3: Photo of the actual part 6240-11-7580

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 9 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 9
REASON: The L-shaped black steel mounting bracket in IMAGE 3 matches the shape and mounting configuration of the part indicated at position 9 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 10
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 10
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 10 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 10
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 10
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 10 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 10
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 10
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 10 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 11
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 11
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 11 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 11
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 11
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 11 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 11
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 11
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 11 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES

CORRECT_POSITION: 8

REASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7830 (COVER) → Position 12
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 12
  IMAGE 3: Photo of the actual part 6240-11-7830

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 12 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 15
REASON: The physical part in IMAGE 3 is a rectangular plate with a bracket, which matches component 15 in the diagram, not the long bar indicated by position 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7830 (COVER) → Position 12
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 12
  IMAGE 3: Photo of the actual part 6240-11-7830

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 12 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 2
REASON: The part in IMAGE 3 is a circular cover plate with four mounting holes, which matches the component pointed to by callout 2 in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-7830 (COVER) → Position 12
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 12
  IMAGE 3: Photo of the actual part 6240-11-7830

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 12 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 2
REASON: The actual part in IMAGE 3 is a flat plate with a distinctive tab and holes, which corresponds to the component indicated by position 2 in IMAGE 1.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 13
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 13
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 13 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 13
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 13
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 13 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 13
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 13
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 13 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 14
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 14
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 14 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 14
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 14
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 14 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 8
REASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 14
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 14
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 14 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES

CORRECT_POSITION: 8

REASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8980 (COVER) → Position 15
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 15
  IMAGE 3: Photo of the actual part 6240-11-8980

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 15 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 9
REASON: Position 9 points to a bolt, while the OEM part 6240-11-8980, as shown in IMAGE 3, is a rectangular gasket which is not depicted in this diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8980 (COVER) → Position 15
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 15
  IMAGE 3: Photo of the actual part 6240-11-8980

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 15 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: NO
CORRECT_POSITION: 17
REASON: The actual part in IMAGE 3 is a gasket that matches the shape and mounting holes of the component indicated by position 17 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 6240-11-8980 (COVER) → Position 15
Physical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.
Technical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 15
  IMAGE 3: Photo of the actual part 6240-11-8980

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 15 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 9
REASON: The circular cover plate shown in the photo matches the component pointed to by callout 9 in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 16
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 16
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 16 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 16
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 16
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 16 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01010-E1030 (BOLT) → Position 16
Physical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.
Technical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 16
  IMAGE 3: Photo of the actual part 01010-E1030

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 16 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 4
REASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 17
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 17
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 17 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
Based on the analysis of the images:

1. **IMAGE 3** shows a flat, circular steel washer (01643-31032).
2. **IMAGE 1** and **IMAGE 2** show callout 17 pointing directly to the washer located underneath the bolt (callout 16) on the heat shield assembly.
3. Therefore, the mapping of the washer to position 17 is correct.

MATCH: YES
CORRECT_POSITION: 17
REASON: Callout 17 correctly points to the flat washer located underneath the bolt (callout 16) in the diagram.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 17
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 17
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 17 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 17
REASON: The zoomed-in diagram at Position 17 shows a washer that matches the physical shape and description of the part in IMAGE 3.


Prompt:
Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]

Current mapping: OEM 01643-31032 (WASHER) → Position 17
Physical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.
Technical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr

You are shown 3 images:
  IMAGE 1: Full diagram with all position numbers visible
  IMAGE 2: Zoomed crop of the diagram at Position 17
  IMAGE 3: Photo of the actual part 01643-31032

Steps:
1. In IMAGE 3, identify what the part looks like
2. In IMAGE 1, find where this type of component appears
3. In IMAGE 2, check if callout 17 points to this component

Answer format (last 3 lines must be exact):
MATCH: YES or NO
CORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]
REASON: one sentence

Response:
MATCH: YES
CORRECT_POSITION: 17
REASON: Position 17 in the diagram clearly points to a flat washer, which matches the physical shape of the OEM part 01643-31032 shown in IMAGE 3.


Prompt:
This is a Komatsu diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.
Here is the current part-to-position mapping:
  Position 1: 6240-11-8970 (COVER) [COVER]
  Position 10: 01010-E1030_c10 (BOLT)
  Position 11: 01643-31032_c11 (WASHER)
  Position 12: 6240-11-7830 (COVER) [COVER]
  Position 13: 01010-E1030_c13 (BOLT)
  Position 14: 01643-31032_c14 (WASHER)
  Position 15: 6240-11-8980 (COVER) [COVER]
  Position 16: 01010-E1030_c16 (BOLT)
  Position 17: 01643-31032_c17 (WASHER)
  Position 2: 6240-11-9110 (PLATE) [PLATE]
  Position 3: 01010-E1020 (BOLT) [BOLT]
  Position 4: 01010-E1030_c4 (BOLT)
  Position 5: 01010-E1035 (BOLT) [BOLT]
  Position 6: 01643-31032_c6 (WASHER)
  Position 7: 01010-E1030_c7 (BOLT)
  Position 8: 01643-31032_c8 (WASHER)
  Position 9: 6240-11-7580 (BRACKET) [BRACKET]

Review the ENTIRE mapping. Are there any obvious errors where two parts should be swapped? If YES, state which positions to swap.
If the mapping looks correct, answer: ALL CORRECT
Format: SWAP pos_A pos_B (one per line) or ALL CORRECT | [IMAGE]

Response: ALL CORRECT


Prompt:
This is a Komatsu diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.
Here is the current part-to-position mapping:
  Position 1: 6240-11-8970 (COVER) [COVER]
  Position 10: 01010-E1030_c10 (BOLT)
  Position 11: 01643-31032_c11 (WASHER)
  Position 12: 6240-11-7830 (COVER) [COVER]
  Position 13: 01010-E1030_c13 (BOLT)
  Position 14: 01643-31032_c14 (WASHER)
  Position 15: 6240-11-8980 (COVER) [COVER]
  Position 16: 01010-E1030_c16 (BOLT)
  Position 17: 01643-31032_c17 (WASHER)
  Position 2: 6240-11-9110 (PLATE) [PLATE]
  Position 3: 01010-E1020 (BOLT) [BOLT]
  Position 4: 01010-E1030_c4 (BOLT)
  Position 5: 01010-E1035 (BOLT) [BOLT]
  Position 6: 01643-31032_c6 (WASHER)
  Position 7: 01010-E1030_c7 (BOLT)
  Position 8: 01643-31032_c8 (WASHER)
  Position 9: 6240-11-7580 (BRACKET) [BRACKET]

Review the ENTIRE mapping. Are there any obvious errors where two parts should be swapped? If YES, state which positions to swap.
If the mapping looks correct, answer: ALL CORRECT
Format: SWAP pos_A pos_B (one per line) or ALL CORRECT

Response: ALL CORRECT