transcript/eng/03/03_013_transcript.txt

1 [00:00:00,000 --> 00:00:01,360] A: four
2 [00:00:03,320 --> 00:00:04,020] A: of the
3 [00:00:05,800 --> 00:00:07,480] E: 3, 1,
4 [00:00:07,980 --> 00:00:08,680] A: six
5 [00:00:09,780 --> 00:00:13,040] E: ok. take all the pieces out of the box,
6 [00:00:16,540 --> 00:00:17,420] E: This you can put it on the ground,
7 [00:00:17,600 --> 00:00:19,059] E: the cardboard is free from there to the table,
8 [00:00:24,260 --> 00:00:25,879] E: As you get the organized pieces,
9 [00:00:27,840 --> 00:00:28,299] E: ok.
10 [00:00:42,200 --> 00:00:45,080] A: three four six
11 [00:00:47,240 --> 00:00:48,639] A: seven
12 [00:00:50,200 --> 00:00:51,599] A: ocho
13 [00:00:58,580 --> 00:00:59,980] E: 3 1 ok
14 [00:01:03,080 --> 00:01:04,540] A: six of
15 [00:01:04,739 --> 00:01:05,519] E: Yes, yes,
16 [00:01:05,379 --> 00:01:06,779] A: three
17 [00:01:05,760 --> 00:01:06,440] E: You can remove.
18 [00:01:11,400 --> 00:01:11,480] E: Ok,
19 [00:01:11,639 --> 00:01:15,639] E: This. Here you see is the side of the bedside table,
20 [00:01:11,760 --> 00:01:13,080] A: four five six
21 [00:01:15,839 --> 00:01:16,860] E: you have another equal,
22 [00:01:17,239 --> 00:01:19,120] E: So look for the other same piece, to this.
23 [00:01:26,919 --> 00:01:27,639] E: Ok,
24 [00:01:27,980 --> 00:01:28,440] E: put them close,
25 [00:01:30,000 --> 00:01:30,199] A: two three four
26 [00:01:32,580 --> 00:01:34,160] E: If you get the chopsticks,
27 [00:01:34,279 --> 00:01:35,779] E: they are wands, plastic,
28 [00:01:36,860 --> 00:01:38,540] E: plastic, transparent type,
29 [00:01:39,300 --> 00:01:39,980] E: Take all four.
30 [00:01:43,379 --> 00:01:45,180] E: These are the guides of the castles,
31 [00:01:45,379 --> 00:01:49,059] E: You can insert them exactly in this area here where you see these four holes.
32 [00:01:46,480 --> 00:01:46,800] A: cinco
33 [00:01:50,040 --> 00:01:50,360] A: six
34 [00:01:51,400 --> 00:01:52,680] E: Yes. yes.
35 [00:01:56,980 --> 00:01:57,559] E: If Non enters,
36 [00:01:58,300 --> 00:01:59,099] E: Help yourself with a hammer.
37 [00:02:00,000 --> 00:02:00,940] A: two three
38 [00:02:01,400 --> 00:02:02,800] A: four
39 [00:02:04,500 --> 00:02:05,900] A: cinco
40 [00:02:11,520 --> 00:02:13,899] A: Six two three
41 [00:02:23,720 --> 00:02:25,440] E: If they are, enter well,
42 [00:02:25,720 --> 00:02:26,320] E: you can screw,
43 [00:02:26,580 --> 00:02:28,119] E: See that they are,
44 [00:02:28,399 --> 00:02:28,720] E: ok,
45 [00:02:30,600 --> 00:02:31,699] E: open the sachet with the hardware,
46 [00:02:34,020 --> 00:02:35,399] E: put all the hardware, on the table.
47 [00:02:41,880 --> 00:02:42,479] E: Ok,
48 [00:02:42,919 --> 00:02:44,960] E: you should find four small screws,
49 [00:02:47,619 --> 00:02:48,419] A: two costs
50 [00:02:49,000 --> 00:02:49,059] E: Exactly,
51 [00:02:49,520 --> 00:02:50,139] E: you should have eight,
52 [00:02:50,240 --> 00:02:50,580] E: Excuse me,
53 [00:02:50,880 --> 00:02:51,800] E: eight, screws of these.
54 [00:02:52,559 --> 00:02:53,199] A: Ahuesta
55 [00:02:53,479 --> 00:02:54,839] A: What is when I
56 [00:02:53,880 --> 00:02:55,699] E: No, no, that's the nail,
57 [00:02:55,639 --> 00:02:56,279] A: start
58 [00:02:55,919 --> 00:02:56,199] E: Exactly.
59 [00:02:56,419 --> 00:02:58,619] E: Take the screws like these here,
60 [00:03:06,300 --> 00:03:07,100] A: a,
61 [00:03:07,500 --> 00:03:07,899] A: two three
62 [00:03:08,960 --> 00:03:19,360] E: You should have two more, ok. At that time,
63 [00:03:09,520 --> 00:03:09,580] A: six
64 [00:03:14,720 --> 00:03:15,520] A: ocho
65 [00:03:17,960 --> 00:03:18,360] A: ocho
66 [00:03:19,660 --> 00:03:22,380] E: these must be inserted here in those side holes,
67 [00:03:23,380 --> 00:03:25,720] E: And you can screw them with the American swivel,
68 [00:03:25,960 --> 00:03:26,419] E: with the cross.
69 [00:03:36,220 --> 00:03:38,100] A: Two can I get up?
70 [00:03:38,960 --> 00:03:41,500] E: I do not believe.
71 [00:03:52,300 --> 00:03:55,100] A: You can get on
72 [00:03:54,259 --> 00:03:55,660] E: Exact,
73 [00:03:55,860 --> 00:03:56,320] E: You can screw.
74 [00:04:04,419 --> 00:04:09,300] A: I will upload your face
75 [00:04:05,800 --> 00:04:06,839] E: Yes, yes,
76 [00:04:07,619 --> 00:04:10,119] E: until you feel that the screw has arrived at the bottom.
77 [00:04:28,980 --> 00:04:30,380] E: We see.
78 [00:04:40,359 --> 00:04:42,859] E: Maybe the guide didn't get in well.
79 [00:04:44,640 --> 00:04:47,119] E: Try to hammer in that area.
80 [00:04:48,559 --> 00:04:50,260] E: ok.
81 [00:04:52,739 --> 00:04:54,420] E: It should be now in line.
82 [00:04:58,040 --> 00:04:59,119] E: Okay don't worry,
83 [00:04:59,299 --> 00:05:00,100] E: You can't screw it
84 [00:05:12,519 --> 00:05:13,079] E: Ok.
85 [00:05:14,959 --> 00:05:15,279] E: All right,
86 [00:05:15,399 --> 00:05:15,920] E: Leave it like this.
87 [00:05:16,940 --> 00:05:29,980] A: As I am I could do such things
89 [00:06:11,739 --> 00:06:12,420] E: But let's see him later.
90 [00:06:22,600 --> 00:06:29,440] E: Ok now, among the pieces to be mounted, you should have wands,
91 [00:06:30,320 --> 00:06:31,160] E: these here white,
92 [00:06:31,299 --> 00:06:31,480] E: you see,
112 [00:07:16,220 --> 00:07:17,100] E: No, no, it doesn't have to enter everything,
113 [00:07:17,380 --> 00:07:18,000] E: It must enter just like that.
114 [00:07:19,779 --> 00:07:21,760] E: Put the wooden spinet on all large holes.
115 [00:07:38,679 --> 00:07:39,880] E: Same thing here too
116 [00:08:15,959 --> 00:08:16,920] E: Ok
117 [00:08:18,480 --> 00:08:21,160] E: Now, the two more chopsticks, let's say,
118 [00:08:21,559 --> 00:08:21,700] E: tight,
119 [00:08:22,559 --> 00:08:23,820] E: If you look at the piece,
120 [00:08:24,059 --> 00:08:26,079] E: the side of the bedside table,
121 [00:08:26,600 --> 00:08:27,459] E: Do you see those two holes?
122 [00:08:28,440 --> 00:08:28,940] E: Exact,
123 [00:08:29,239 --> 00:08:31,640] E: You can insert it both above and on the side.
124 [00:08:32,580 --> 00:08:35,520] E: See that it only coincides exactly above.
125 [00:08:38,000 --> 00:08:42,780] E: Now this rough one is the back,
126 [00:08:40,479 --> 00:08:41,640] A: Is it starting
127 [00:08:43,020 --> 00:08:47,400] E: so does it go into the two holes you see above on the right?
128 [00:08:46,539 --> 00:08:47,940] A: Ok
129 [00:08:50,260 --> 00:08:50,719] A: this? that's it
130 [00:08:50,880 --> 00:08:53,979] E: Then there will be a bubble that we will start later.
131 [00:08:54,580 --> 00:08:56,179] E: Always match the large hole,
132 [00:08:59,440 --> 00:09:02,020] E: And this white instead is in the inner part.
133 [00:09:09,020 --> 00:09:11,140] E: Now you can close the other half of the bedside table,
134 [00:09:11,520 --> 00:09:13,900] E: See the other side? You can make it coincide above,
135 [00:09:14,260 --> 00:09:21,299] E: So turn it above, and have the holes coincide.
136 [00:09:34,239 --> 00:09:34,919] E: Perfect,
137 [00:09:35,919 --> 00:09:38,080] E: do you see the two holes that are left free?
138 [00:09:39,419 --> 00:09:42,979] E: In the hardware there are longer bubbles,
139 [00:09:43,840 --> 00:09:44,080] E: Exactly,
140 [00:09:44,419 --> 00:09:50,679] E: Take the two. And these must be inserted in the holes that have remained open.
141 [00:09:46,820 --> 00:09:47,700] A: Ok
142 [00:09:51,919 --> 00:09:52,719] A: Thus and left over
143 [00:09:52,659 --> 00:09:53,280] E: Above?
144 [00:09:54,039 --> 00:09:54,659] E: And also the one below.
145 [00:09:55,520 --> 00:09:55,640] A: Ok,
146 [00:09:55,960 --> 00:09:56,080] A: inside
147 [00:09:59,859 --> 00:10:03,760] E: Now with the hexagonal key that you find there on the hardware,
148 [00:10:03,940 --> 00:10:07,119] E: See in the hardware, C is a LE -shaped key
149 [00:10:08,119 --> 00:10:08,440] E: Exactly,
150 [00:10:08,739 --> 00:10:09,780] E: You can screw.
151 [00:10:28,640 --> 00:10:29,080] E: No
152 [00:10:34,159 --> 00:10:35,559] A: Ok
153 [00:10:36,400 --> 00:10:38,059] E: Now the sixth we have to do it on the other side,
154 [00:10:38,280 --> 00:10:39,280] E: then turn the nightstand
155 [00:10:48,179 --> 00:10:52,119] E: and also screwed the two screws in this case.
156 [00:10:56,080 --> 00:10:56,859] A: Ok
157 [00:11:29,520 --> 00:11:30,919] A: Ok
158 [00:11:30,080 --> 00:11:30,760] E: Ok
159 [00:11:33,059 --> 00:11:34,179] E: Now if you turn the bedside table,
160 [00:11:34,520 --> 00:11:37,460] E: turn it on one side,
161 [00:11:39,280 --> 00:11:40,479] E: Do you see that there are those four holes?
162 [00:11:40,859 --> 00:11:43,500] E: If you look under the bedside table there are four holes?
163 [00:11:45,320 --> 00:11:45,559] E: The side,
164 [00:11:45,859 --> 00:11:45,880] E: the side,
165 [00:11:46,020 --> 00:11:47,419] A: Ok,
166 [00:11:46,059 --> 00:11:47,380] E: Here they are, look at them, do you see them?
167 [00:11:48,159 --> 00:11:48,479] E: Ok,
168 [00:11:48,840 --> 00:11:49,400] E: there he goes there,
169 [00:11:50,020 --> 00:11:50,719] E: inserted the foot,
170 [00:11:51,320 --> 00:11:52,119] E: I go back to the hardware,
171 [00:11:53,419 --> 00:11:55,140] E: There are these four plastic feet,
172 [00:11:55,320 --> 00:11:55,380] E: you see?
173 [00:11:56,059 --> 00:11:56,900] E: The double hole,
174 [00:11:57,359 --> 00:11:57,380] E: Exactly,
175 [00:11:57,659 --> 00:11:58,760] E: There are four.
176 [00:11:59,840 --> 00:12:00,640] E: you can enter them.
177 [00:12:15,979 --> 00:12:17,380] A: Ok
179 [00:12:22,140 --> 00:12:25,559] E: Now you can raise the bedside table
180 [00:12:25,719 --> 00:12:27,119] A: Ok
181 [00:12:28,400 --> 00:12:29,559] E: Go back to the pieces to whip
182 [00:12:30,000 --> 00:12:31,179] E: Those who remained free to you
183 [00:12:31,960 --> 00:12:32,299] E: you should
184 [00:12:32,419 --> 00:12:32,719] E: ah
185 [00:12:33,880 --> 00:12:34,619] E: and then I'll tell you
186 [00:12:34,820 --> 00:12:35,979] E: I'll explain how to get it better
187 [00:12:36,719 --> 00:12:40,219] E: In the pieces to be mounted you should have the piece above
188 [00:12:41,179 --> 00:12:42,840] E: which is exactly square form
189 [00:12:43,119 --> 00:12:44,200] E: Take the one
190 [00:12:46,419 --> 00:12:47,299] E: exact yes
191 [00:12:47,640 --> 00:12:49,400] E: But always place it on the desk
192 [00:12:49,880 --> 00:12:50,020] E: on the table
193 [00:12:50,400 --> 00:12:52,559] E: Place it with the holes at the top
194 [00:12:52,219 --> 00:12:53,619] A: Ok
196 [00:12:57,760 --> 00:12:58,419] E: At that time
197 [00:12:58,539 --> 00:13:01,080] E: Do you see those longer screws with the plastic part?
198 [00:13:02,059 --> 00:13:02,619] E: No
199 [00:13:03,059 --> 00:13:04,239] E: There are long screws.
200 [00:13:05,080 --> 00:13:05,460] E: take the two
201 [00:13:06,840 --> 00:13:08,700] E: It is always American swivel.
202 [00:13:09,619 --> 00:13:11,479] E: he girevite?
203 [00:13:11,619 --> 00:13:12,859] E: No. that is the hexagonal key
204 [00:13:14,719 --> 00:13:15,320] E: This here.
205 [00:13:17,260 --> 00:13:17,340] E: Ok,
206 [00:13:17,479 --> 00:13:18,320] E: Do you see that C has the two holes?
207 [00:13:18,679 --> 00:13:21,219] E: this screw must be screwed into the smaller one
208 [00:13:21,799 --> 00:13:21,820] E: Exactly
209 [00:13:23,919 --> 00:13:24,440] E: You can screw.
210 [00:13:32,900 --> 00:13:34,299] A: Ok
211 [00:13:47,080 --> 00:13:56,859] E: Now take two wooden spines. And you can insert them in those holes that remained.
212 [00:13:47,419 --> 00:13:47,799] A: Ok
213 [00:13:59,840 --> 00:14:01,859] E: Then this is the upper part of the bedside table.
214 [00:14:02,020 --> 00:14:04,260] E: So you can take it and mount on the bedside table.
215 [00:14:07,200 --> 00:14:07,640] E: Exact,
216 [00:14:07,840 --> 00:14:08,559] E: Do you see that there are some holes?
217 [00:14:09,200 --> 00:14:10,099] E: That's right, let it coincide.
218 [00:14:17,000 --> 00:14:17,760] E: Ok.
219 [00:14:18,479 --> 00:14:20,000] E: Then, look inside the bedside table.
220 [00:14:27,080 --> 00:14:27,099] E: ok,
221 [00:14:27,679 --> 00:14:28,380] E: We were looking for.
222 [00:14:29,380 --> 00:14:32,119] E: exactly this, plastic compass,
223 [00:14:31,739 --> 00:14:32,440] A: Ok
224 [00:14:32,320 --> 00:14:32,880] E: Just this,
225 [00:14:33,320 --> 00:14:34,760] E: If you look inside, the bedside table,
226 [00:14:34,900 --> 00:14:35,500] E: guard inside,
227 [00:14:36,119 --> 00:14:37,239] E: there are large holes,
228 [00:14:37,520 --> 00:14:38,919] A: Ok
229 [00:14:40,039 --> 00:14:43,080] E: And this must be inserted in the hole you see,
230 [00:14:43,640 --> 00:14:44,479] E: Let's say free
231 [00:14:46,880 --> 00:14:47,840] A: Ok Ok
232 [00:14:48,760 --> 00:14:49,359] E: At that time
233 [00:14:49,479 --> 00:14:50,340] E: only inserted.
234 [00:14:51,559 --> 00:14:52,020] A: And
235 [00:14:51,840 --> 00:14:55,599] E: Now take the Italian swivel,
236 [00:14:55,700 --> 00:14:56,919] E: Which is the one that you find.
237 [00:14:57,960 --> 00:14:58,500] E: Exactly
238 [00:15:01,119 --> 00:15:04,500] E: The plastic compass must do half a round clockwise.
239 [00:15:01,179 --> 00:15:01,880] A: And
240 [00:15:12,200 --> 00:15:13,739] E: You see it because it is blocked,
241 [00:15:14,200 --> 00:15:15,599] A: Ok
242 [00:15:14,200 --> 00:15:14,700] E: So as soon as he turns,
243 [00:15:14,940 --> 00:15:16,260] E: Then he stops, and no longer turns.
244 [00:15:16,780 --> 00:15:17,080] A: Ok Ok
245 [00:15:17,020 --> 00:15:19,299] E: Same thing on the other
246 [00:15:20,760 --> 00:15:22,219] E: it's practically half a turn,
247 [00:15:22,679 --> 00:15:23,219] E: more or less.
248 [00:15:31,119 --> 00:15:36,000] E: Ok now we have to mount the backrest.
249 [00:15:36,340 --> 00:15:37,200] E: you take
261 [00:16:05,719 --> 00:16:06,179] E: Now,
262 [00:16:08,260 --> 00:16:10,299] E: If you go back to the window, you have nails.
263 [00:16:13,099 --> 00:16:14,119] E: take four.
264 [00:16:15,280 --> 00:16:15,419] E: Four nails.
265 [00:16:18,900 --> 00:16:18,960] E: At that time,
266 [00:16:19,099 --> 00:16:21,020] E: Put them two on each side,
267 [00:16:21,659 --> 00:16:22,919] E: So two above.
268 [00:16:26,099 --> 00:16:29,820] E: you can put them or respect those holes you find,
269 [00:16:29,940 --> 00:16:30,739] E: Or put them where you want.
270 [00:16:30,919 --> 00:16:31,580] E: Put two on each side.
271 [00:16:40,039 --> 00:16:41,580] E: Always close to the edge.
272 [00:16:41,880 --> 00:16:42,719] E: Look at the edge.
273 [00:16:43,239 --> 00:16:44,840] E: it must be close to the edge
274 [00:16:44,960 --> 00:16:45,679] E: otherwise go out.
275 [00:16:45,580 --> 00:16:47,059] A: Ok, Ok,
276 [00:16:59,400 --> 00:17:00,799] E: Perfect.
277 [00:17:22,000 --> 00:17:23,400] A: Ok
278 [00:17:23,000 --> 00:17:24,400] E: Ok
279 [00:17:29,199 --> 00:17:29,579] E: Near the edge
280 [00:17:57,660 --> 00:17:59,060] A: Ok
281 [00:18:05,619 --> 00:18:07,339] E: That's okay
282 [00:18:07,780 --> 00:18:09,180] A: Ok
283 [00:18:09,079 --> 00:18:09,819] E: You see the bedside table is assembled
284 [00:18:10,140 --> 00:18:11,800] E: so you can raise it and move it
285 [00:18:12,800 --> 00:18:17,839] E: Now we mount the drawers
286 [00:18:23,140 --> 00:18:23,939] E: At that time
287 [00:18:25,599 --> 00:18:34,400] E: See you have gods, frontals
288 [00:18:35,819 --> 00:18:37,119] E: move these here.
289 [00:18:37,300 --> 00:18:37,880] E: These movements.
290 [00:18:38,099 --> 00:18:38,380] E: shifts
291 [00:18:39,540 --> 00:18:40,839] E: We have to work with these pieces here,
292 [00:18:40,239 --> 00:18:43,739] A: Ok Ok Ok
293 [00:18:42,719 --> 00:18:43,920] E: Also in this case,
294 [00:18:44,199 --> 00:18:45,900] E: You see that there are large holes and small holes.
295 [00:18:47,219 --> 00:18:50,719] E: So the wooden spinet goes on the large hole.
296 [00:18:57,339 --> 00:18:59,420] E: In the small hole,
297 [00:19:01,839 --> 00:19:02,459] E: Yes. Yes. you can try it
298 [00:19:02,579 --> 00:19:03,520] E: You can do, yes.
299 [00:19:04,540 --> 00:19:08,119] E: In the small hole we must always put the screw with the piece of plastic.
300 [00:19:09,579 --> 00:19:11,439] E: So you can screw it with the turn.
301 [00:19:27,140 --> 00:19:28,540] A: Ok
302 [00:19:29,839 --> 00:19:38,319] E: You can also make him do it with your hands in half and then you turn around if you get hurt
303 [00:19:38,739 --> 00:19:41,280] A: Ok Ok Ok
304 [00:19:41,800 --> 00:19:42,760] E: Also on the other drawer,
305 [00:19:43,020 --> 00:19:44,680] E: These are the front of the drawer, practically.
306 [00:20:05,459 --> 00:20:06,140] E: Ok,
307 [00:20:06,640 --> 00:20:09,180] E: Now, three pieces to mount again.
308 [00:20:09,400 --> 00:20:10,979] E: that is, the side of the drawer,
309 [00:20:11,180 --> 00:20:13,180] E: If you take them you should have four.
310 [00:20:14,880 --> 00:20:15,520] E: Ok,
311 [00:20:15,880 --> 00:20:16,760] E: take, this no.
312 [00:20:19,199 --> 00:20:21,300] E: You should have four all the same.
313 [00:20:22,800 --> 00:20:24,359] E: Except that two are wider.
314 [00:20:26,060 --> 00:20:27,780] E: Do you see they are two?
315 [00:20:27,020 --> 00:20:29,479] A: Ok Ok Ok
317 [00:20:29,319 --> 00:20:29,900] E: Do you have two more?
318 [00:20:30,439 --> 00:20:31,079] E: No, this no,
319 [00:20:31,339 --> 00:20:31,959] E: This serves later.
320 [00:20:34,319 --> 00:20:36,060] E: Then, take the two tightest
321 [00:20:36,280 --> 00:20:37,540] E: See these here you have in your hand.
322 [00:20:39,140 --> 00:20:41,760] E: We have to mount them on the narrowest drawer.
323 [00:20:43,380 --> 00:20:44,619] E: See that there is exactly.
324 [00:20:45,780 --> 00:20:48,020] E: Look at the top of the wand.
325 [00:20:49,880 --> 00:20:51,280] E: See that C has holes.
326 [00:20:51,739 --> 00:20:52,219] E: tour. on the contrary,
327 [00:20:52,760 --> 00:20:53,479] E: cute. cute.
328 [00:20:54,020 --> 00:20:54,719] E: look from the other side,
329 [00:20:56,800 --> 00:21:01,599] E: These must be inserted in the spinets that we have just mounted.
330 [00:21:02,839 --> 00:21:05,280] E: Then you turn it over and insert it
331 [00:21:06,359 --> 00:21:06,939] E: It is obliged.
332 [00:21:07,359 --> 00:21:07,619] E: No no.
333 [00:21:08,439 --> 00:21:08,920] E: Guard, spin. cute.
334 [00:21:09,160 --> 00:21:10,900] E: See that there is a groove.
335 [00:21:09,260 --> 00:21:10,660] A: Ok
337 [00:21:13,560 --> 00:21:14,260] E: Exactly. you see, exactly.
338 [00:21:14,540 --> 00:21:14,819] E: guard.
339 [00:21:15,739 --> 00:21:17,420] E: See that he must coincide that.
340 [00:21:15,760 --> 00:21:17,099] A: OK, Si
341 [00:21:17,439 --> 00:21:17,599] A: and
342 [00:21:17,780 --> 00:21:25,380] A: and
343 [00:21:17,780 --> 00:21:18,339] E: that's right, groove.
344 [00:21:19,260 --> 00:21:22,400] E: Same thing with the other.
345 [00:21:26,640 --> 00:21:32,619] E: Then, I go back to the hardware. And you should have two other plastic bussolotti ah no,
346 [00:21:33,040 --> 00:21:34,119] E: Sorry, metal in this case.
347 [00:21:34,939 --> 00:21:37,640] E: remember those plastic cups we assembled?
348 [00:21:38,000 --> 00:21:39,380] E: Now I'm metal.
349 [00:21:40,199 --> 00:21:40,479] E: Exactly
350 [00:21:41,060 --> 00:21:43,579] E: Insert them and rotate them.
351 [00:21:45,560 --> 00:21:46,900] E: Yes, yes, because otherwise he doesn't enter.
352 [00:21:52,819 --> 00:21:56,920] E: With the lap to vine always in Italian
353 [00:21:53,900 --> 00:21:55,560] A: Ok Ok
354 [00:21:58,439 --> 00:22:00,060] E: tour
355 [00:22:00,699 --> 00:22:01,099] E: Perfect
356 [00:22:01,579 --> 00:22:07,800] E: same thing on the other side.
357 [00:22:06,619 --> 00:22:08,020] A: Ok
358 [00:22:11,719 --> 00:22:14,640] E: Then the backrest now we have to insert
359 [00:22:14,900 --> 00:22:17,500] E: see the backrests these squares
360 [00:22:18,020 --> 00:22:18,060] E: Exactly
361 [00:22:18,420 --> 00:22:19,819] E: You can insert it in the milling
362 [00:22:19,959 --> 00:22:20,560] E: but wait
363 [00:22:20,859 --> 00:22:22,500] E: the white part inside
364 [00:22:24,479 --> 00:22:25,380] E: So what we are mounting
365 [00:22:25,640 --> 00:22:25,959] E: Perfect
366 [00:22:27,300 --> 00:22:28,959] E: it's the drawer,
367 [00:22:28,020 --> 00:22:28,060] A: Ok Ok
368 [00:22:29,839 --> 00:22:30,439] E: Ok,
369 [00:22:30,839 --> 00:22:34,459] E: The last part of the drawer is missing. which is the back
370 [00:22:36,560 --> 00:22:36,640] E: Exactly
371 [00:22:36,959 --> 00:22:41,500] E: Yes the thinner one because this is the wide one that goes on the other drawer
372 [00:22:41,719 --> 00:22:42,599] E: ce n is a smaller
373 [00:22:43,739 --> 00:22:47,239] E: lift the drawer because it will be bad that way
374 [00:22:47,560 --> 00:22:48,959] E: Put it as we were before
375 [00:22:48,640 --> 00:22:50,040] A: Ok
376 [00:22:49,760 --> 00:22:52,800] E: exact then make the milling coincide
377 [00:22:55,719 --> 00:22:56,099] E: All right
378 [00:22:56,599 --> 00:23:00,020] E: Now in the hardware you have plastic spines
379 [00:22:59,380 --> 00:23:00,780] A: Ok
380 [00:23:00,939 --> 00:23:02,800] E: See that they are long plastic thorns
381 [00:23:03,280 --> 00:23:03,579] E: Exactly
382 [00:23:05,160 --> 00:23:06,680] E: You can insert them on this hole
383 [00:23:08,660 --> 00:23:15,319] E: They are two on each side so you can insert and you can also push them with your fingers because they should enter up to a certain point
384 [00:23:17,280 --> 00:23:18,819] E: If they don't enter there is always the hammer
385 [00:23:18,900 --> 00:23:22,260] A: Ok Ok Ok Ok
386 [00:23:23,920 --> 00:23:27,660] A: Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok
387 [00:23:25,939 --> 00:23:27,339] E: Ok
388 [00:23:38,060 --> 00:23:39,939] E: Push them with the hammer
389 [00:23:40,660 --> 00:23:41,119] A: Ok
390 [00:23:46,959 --> 00:23:47,640] E: Ok
391 [00:23:47,800 --> 00:23:51,239] E: This is the first drawer
392 [00:23:55,500 --> 00:23:57,739] E: The first drawer you can insert in the above part
393 [00:24:05,099 --> 00:24:06,800] E: We mount the other
394 [00:24:09,140 --> 00:24:09,640] E: Oh well it's just a bit
395 [00:24:09,800 --> 00:24:09,880] E: stand
396 [00:24:10,040 --> 00:24:14,000] A: Ok Ok
397 [00:24:14,739 --> 00:24:16,959] E: Same thing with the wide drawer
398 [00:24:17,180 --> 00:24:18,459] E: So you have the lateral ones first
399 [00:24:19,540 --> 00:24:22,359] E: who are those two who remained there
400 [00:24:22,959 --> 00:24:23,060] E: Exactly
401 [00:24:25,680 --> 00:24:28,020] E: Make the holes and milling coincide
402 [00:24:29,619 --> 00:24:29,920] E: contrary
403 [00:24:34,359 --> 00:24:35,180] E: Raises because I don't see
404 [00:24:35,540 --> 00:24:37,060] E: raise the head a little
405 [00:24:37,339 --> 00:24:39,699] E: in the guard always
406 [00:24:39,959 --> 00:24:40,939] E: this is the drawer line
407 [00:24:41,180 --> 00:24:41,780] E: look at the line
408 [00:24:42,140 --> 00:24:43,079] E: The drawer is not a line
409 [00:24:43,839 --> 00:24:45,239] A: And
410 [00:24:44,699 --> 00:24:45,800] E: And this C is also a line
411 [00:24:46,060 --> 00:24:46,640] E: make them match
412 [00:24:47,800 --> 00:24:49,160] E: Perfect
413 [00:24:56,920 --> 00:24:59,060] E: Bussolotto now of metal.
414 [00:25:05,199 --> 00:25:07,099] E: This blocks the part you mounted,
415 [00:25:08,079 --> 00:25:09,500] E: It doesn't let it come out yes
416 [00:25:20,380 --> 00:25:21,780] A: Ok
417 [00:25:21,040 --> 00:25:22,199] E: That's okay too
418 [00:25:29,500 --> 00:25:31,939] E: Now we can put the backrest
419 [00:25:32,140 --> 00:25:35,780] E: first the backrest
420 [00:25:32,619 --> 00:25:34,020] A: Ok
421 [00:25:36,979 --> 00:25:38,959] E: White part always inside
422 [00:25:42,479 --> 00:25:43,880] A: Ok
423 [00:25:44,920 --> 00:25:45,079] E: Ok,
424 [00:25:45,280 --> 00:25:46,280] E: and the back
425 [00:25:52,160 --> 00:25:53,560] A: Ok
426 [00:25:54,079 --> 00:25:54,920] E: Ok
427 [00:25:55,339 --> 00:25:56,020] E: plastic schie
428 [00:26:00,900 --> 00:26:07,000] A: Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok Ok
429 [00:26:21,280 --> 00:26:22,959] E: Hammer, so you can insert it
430 [00:26:34,260 --> 00:26:34,959] E: Ok,
431 [00:26:34,780 --> 00:26:36,180] A: Ok
432 [00:26:36,040 --> 00:26:36,560] E: You can insert it
433 [00:26:57,939 --> 00:26:58,900] E: He doesn't enter.
434 [00:26:58,599 --> 00:27:00,000] A: Ok
435 [00:27:02,680 --> 00:27:04,239] E: Let me see the drawer guides.
436 [00:27:04,859 --> 00:27:06,560] E: No, it's not the one there.
437 [00:27:06,079 --> 00:27:07,479] A: Ok
438 [00:27:07,420 --> 00:27:07,459] E: guard,
439 [00:27:07,900 --> 00:27:07,979] E: you see,
440 [00:27:09,040 --> 00:27:09,119] E: Exactly
441 [00:27:09,439 --> 00:27:11,020] E: This here now unscrew the screw.
442 [00:27:09,800 --> 00:27:11,199] A: Ok
443 [00:27:11,280 --> 00:27:11,660] E: Remove the screw.
444 [00:27:11,839 --> 00:27:12,339] E: Remove the screw.
445 [00:27:12,540 --> 00:27:13,180] E: First removes the screw.
446 [00:27:27,119 --> 00:27:28,000] E: Ok,
447 [00:27:28,439 --> 00:27:30,359] E: Now he closes that part that has remained,
448 [00:27:31,359 --> 00:27:31,699] E: Let's say, free,
449 [00:27:32,520 --> 00:27:32,599] E: open
450 [00:27:33,140 --> 00:27:34,040] E: also with the hammer,
451 [00:27:34,160 --> 00:27:35,359] E: Yes
452 [00:27:36,060 --> 00:27:37,000] E: That's okay
453 [00:27:38,479 --> 00:27:39,359] E: Ok,
454 [00:27:39,219 --> 00:27:41,319] A: Ok Ok Ok
455 [00:27:42,260 --> 00:27:42,839] E: You opened.
456 [00:27:44,160 --> 00:27:45,140] E: Ok,
457 [00:27:46,739 --> 00:27:46,979] E: But it's okay.
458 [00:27:47,739 --> 00:27:51,199] E: Then it's the same drawer now that he pushes him inside,
459 [00:27:51,540 --> 00:27:53,599] E: So you can restart it.
460 [00:28:02,079 --> 00:28:03,160] E: You can reintegrate the drawer.
461 [00:28:13,119 --> 00:28:14,520] A: Ok
462 [00:28:14,099 --> 00:28:14,660] E: Ok.
463 [00:28:17,479 --> 00:28:22,400] E: The last part that there is to be mounted are those plastic bussolotti. If you return to the hardware,
464 [00:28:25,339 --> 00:28:27,000] E: There are four plastic compass.
465 [00:28:28,020 --> 00:28:28,339] E: Exactly.
466 [00:28:29,339 --> 00:28:32,040] E: This is the detention for the drawer. In order not to let everything come out.
467 [00:28:32,719 --> 00:28:37,739] E: So open a drawer. but open it in half,
468 [00:28:38,239 --> 00:28:39,099] E: Open half a drawer.
469 [00:28:38,640 --> 00:28:40,079] A: Ok Ok
470 [00:28:40,959 --> 00:28:42,479] E: See that there are some holes.
471 [00:28:45,040 --> 00:28:46,160] E: You have to close it a little closing it,
472 [00:28:46,500 --> 00:28:47,719] E: Close it, because otherwise the guide doesn't get.
473 [00:28:48,160 --> 00:28:49,619] E: Close, close, a little ok, so.
474 [00:28:50,619 --> 00:28:52,119] E: This must be inserted on that hole.
475 [00:28:54,040 --> 00:28:55,520] E: should enter even with your hands,
476 [00:28:55,739 --> 00:28:56,719] E: If not, you help you turn.
477 [00:28:57,520 --> 00:28:58,920] A: Ok
478 [00:29:18,060 --> 00:29:18,920] A: Ok
479 [00:29:24,699 --> 00:29:26,099] A: Ok
480 [00:29:34,280 --> 00:29:35,959] A: Ok Ok Ok Ok Ok Ok Ok Ok Ok
481 [00:29:34,319 --> 00:29:35,719] E: Ok
482 [00:29:36,880 --> 00:29:38,660] E: Same thing in the one below.
483 [00:29:46,780 --> 00:29:47,459] E: Yes. Yes.
484 [00:30:14,680 --> 00:30:15,640] E: Finished
485 [00:30:17,300 --> 00:30:18,000] A: Ok
486 [00:30:20,560 --> 00:30:21,520] E: Yes
487 [00:30:23,319 --> 00:30:25,040] E: It is always the countdown
488 [00:30:27,020 --> 00:30:27,979] E: Three
489 [00:30:30,199 --> 00:30:30,339] E: a
490 [00:30:30,680 --> 00:30:32,079] A: Ok