transcript/eng/03/03_007_transcript.txt

1 [00:00:00,000 --> 00:00:01,280] A: quattro,
2 [00:00:01,620 --> 00:00:02,340] E: 3
3 [00:00:05,760 --> 00:00:06,480] E: 1
4 [00:00:08,620 --> 00:00:09,520] A: ok I do,
5 [00:00:09,880 --> 00:00:11,500] E: open the cardboard
6 [00:00:13,600 --> 00:00:17,740] E: and separate all the pieces take all the pieces and put them
7 [00:00:18,120 --> 00:00:18,840] E: attack
8 [00:00:19,040 --> 00:00:25,180] E: you will notice that there are some that have the same shape therefore separated with the same shape and size
9 [00:00:23,040 --> 00:00:25,879] A: You are OK
10 [00:00:33,360 --> 00:00:35,299] A: I can all
11 [00:00:35,639 --> 00:00:36,680] E: everything comes out
12 [00:01:15,139 --> 00:01:16,580] A: this I take it off
13 [00:01:16,820 --> 00:01:21,879] E: yes you can remove it put it to the ground aside
14 [00:01:23,120 --> 00:01:24,900] E: then if you see this
15 [00:01:24,800 --> 00:01:32,680] A: ok, this here ok, yes
16 [00:01:25,320 --> 00:01:26,480] E: The first piece you have right above
17 [00:01:27,199 --> 00:01:29,980] E: this here you have another equal and put it
18 [00:01:31,440 --> 00:01:33,620] E: and put one next to the other
19 [00:01:38,860 --> 00:01:39,500] E: Exactly
20 [00:01:40,599 --> 00:01:41,239] E: ok
21 [00:01:42,480 --> 00:01:45,980] E: Perfect now take the berries
22 [00:01:47,779 --> 00:01:51,540] E: Going open all this this here is the hardware store put everything on the table
23 [00:01:57,739 --> 00:02:01,139] A: Ok the thin wands, do you want to be transparent?
24 [00:02:01,379 --> 00:02:06,839] E: no no these wooden qua see these pieces of white wooden no no you go go back to the pieces
25 [00:02:02,139 --> 00:02:03,059] A: no,
26 [00:02:08,199 --> 00:02:11,160] E: ok see the berries these exactly here
27 [00:02:10,600 --> 00:02:12,699] A: almost ok
28 [00:02:12,380 --> 00:02:19,240] E: rectangular ones the rectangular ones these exact here 1 2 take all 4 pieces
29 [00:02:16,279 --> 00:02:21,139] A: ok three and four, ok
30 [00:02:19,679 --> 00:02:20,020] E: Exactly
31 [00:02:21,100 --> 00:02:28,440] E: To mount these now you have to see exactly so you see that there is a larger hole and a smaller one
32 [00:02:29,119 --> 00:02:30,440] A: and
33 [00:02:29,660 --> 00:02:32,199] E: The wooden spinet goes in the large hole
34 [00:02:32,380 --> 00:02:34,339] E: So take those wooden spines
35 [00:02:34,800 --> 00:02:35,820] A: this wooden spinet?
36 [00:02:36,199 --> 00:02:38,339] E: That's right and put it in the large hole
37 [00:02:39,199 --> 00:02:41,559] E: if it does not enter you help you with the hammer
38 [00:02:39,740 --> 00:02:43,380] A: ok but must enter to the end?
39 [00:02:43,720 --> 00:02:46,179] E: yes yes until it is okay
40 [00:02:46,380 --> 00:02:48,500] E: do the same thing in the other pieces too
41 [00:02:57,919 --> 00:03:00,279] A: ok also in this small hole?
42 [00:03:00,679 --> 00:03:03,559] E: no no there is not going to another thing
43 [00:03:01,279 --> 00:03:02,300] A: ok
44 [00:03:05,320 --> 00:03:06,720] A: ok
45 [00:03:32,139 --> 00:03:33,539] E: you see
46 [00:03:49,320 --> 00:03:50,720] A: ok
47 [00:03:51,039 --> 00:03:55,460] E: Perfect now those plastic guides those you had taken before
48 [00:03:55,639 --> 00:03:56,259] E: those
49 [00:03:56,979 --> 00:03:59,800] E: That's right take all 4
50 [00:03:57,600 --> 00:03:59,000] A: this is here
51 [00:04:00,899 --> 00:04:02,000] E: and see that C have
52 [00:04:02,500 --> 00:04:04,479] E: The piece I made you take before
53 [00:04:05,259 --> 00:04:13,880] E: they have holes you can insert them directly there watch facts exact space no no you see the side
54 [00:04:09,759 --> 00:04:11,160] A: Wait
55 [00:04:12,940 --> 00:04:13,139] A: no
56 [00:04:14,479 --> 00:04:21,760] E: The side of the furniture the first pieces that I made you take the first pieces that I made you take the ones that C is on the table
57 [00:04:14,720 --> 00:04:18,100] A: the side is this
58 [00:04:22,440 --> 00:04:24,119] A: this ok
59 [00:04:23,380 --> 00:04:26,019] E: See they have 4 holes
60 [00:04:26,200 --> 00:04:27,320] A: and
61 [00:04:26,859 --> 00:04:29,500] E: Insert the guide inside you coincide
62 [00:04:28,359 --> 00:04:29,660] A: they have more than four holes
63 [00:04:30,500 --> 00:04:32,019] A: Wait which of these holes?
64 [00:04:33,540 --> 00:04:36,000] E: See that there are those in -line holes
65 [00:04:36,179 --> 00:04:37,690] E: 4 holes in line
66 [00:04:36,500 --> 00:04:39,140] A: ok I saw them these here
67 [00:04:39,140 --> 00:04:42,279] E: that goes there but we can put it after, however, it is better to put it later
68 [00:04:42,859 --> 00:04:43,119] A: ok,
69 [00:04:43,619 --> 00:04:45,589] E: Put the plastic guides first
70 [00:04:43,779 --> 00:04:44,540] A: ok,
71 [00:04:45,220 --> 00:04:46,339] A: This
72 [00:04:47,380 --> 00:04:48,179] E: ok see
73 [00:04:48,579 --> 00:04:50,839] A: Like this? ok
74 [00:04:48,720 --> 00:04:49,299] E: Exactly
75 [00:04:50,380 --> 00:04:52,859] E: if it does not enter you help you with the hammer
76 [00:04:54,820 --> 00:04:56,220] A: ok
77 [00:04:59,579 --> 00:05:01,160] A: even here?
78 [00:05:00,200 --> 00:05:02,660] E: and the same on the other side
79 [00:05:03,420 --> 00:05:04,119] A: ok
80 [00:05:13,459 --> 00:05:15,559] E: The guides must go all the way
81 [00:05:17,179 --> 00:05:19,320] E: See they are a bit open
82 [00:05:19,459 --> 00:05:21,260] A: Here I go with the hammer
83 [00:05:19,920 --> 00:05:21,179] E: If you can't
84 [00:05:21,519 --> 00:05:22,839] E: it slowly you can help you
85 [00:05:52,600 --> 00:05:52,739] E: with the hammer
86 [00:05:52,640 --> 00:05:54,040] A: ok
87 [00:05:53,839 --> 00:05:56,399] E: perfect go to the hardware
88 [00:05:56,959 --> 00:05:58,059] E: you should have
89 [00:05:57,119 --> 00:05:58,519] A: this?
90 [00:05:58,779 --> 00:06:02,540] E: It is exact 8 small screws
91 [00:06:03,480 --> 00:06:04,279] E: Exactly
92 [00:06:04,899 --> 00:06:06,579] A: these? four
93 [00:06:04,980 --> 00:06:08,700] E: you should have 8 how these are not these nails
94 [00:06:07,579 --> 00:06:08,459] A: these?
95 [00:06:09,000 --> 00:06:12,019] E: That's right you should have 8 like these seeking
96 [00:06:13,420 --> 00:06:14,119] A: a
97 [00:06:26,779 --> 00:06:29,059] A: Maybe one is missing
98 [00:06:28,959 --> 00:06:29,980] E: and looks at her
99 [00:06:30,160 --> 00:06:31,119] E: right in the middle
100 [00:06:31,959 --> 00:06:33,119] E: near the key
101 [00:06:32,459 --> 00:06:33,160] A: here I saw it
102 [00:06:33,619 --> 00:06:34,160] E: Exactly
103 [00:06:35,140 --> 00:06:35,820] A: ok
104 [00:06:35,359 --> 00:06:36,440] E: now these
105 [00:06:36,679 --> 00:06:39,760] E: See on the sides of the guides there are small holes
106 [00:06:40,299 --> 00:06:41,380] E: you have to screw
107 [00:06:41,660 --> 00:06:46,239] E: The guides there will help you with the swivel that with the cross head
108 [00:06:41,739 --> 00:06:42,420] A: ok
109 [00:06:49,059 --> 00:06:49,760] A: This?
110 [00:06:49,220 --> 00:06:50,239] E: that's right
111 [00:07:11,279 --> 00:07:14,880] E: That's okay so consider that as soon as you feel it getting it is fine
112 [00:07:12,480 --> 00:07:13,380] A: ok
113 [00:07:33,000 --> 00:07:33,839] A: Then here,
114 [00:07:34,000 --> 00:07:34,640] A: here, and here,
115 [00:07:35,000 --> 00:07:36,619] E: Here is exactly on all guides
116 [00:07:36,140 --> 00:07:37,480] A: ok ok
117 [00:07:37,700 --> 00:07:40,679] E: Those are the guides and drawer we then mount after
118 [00:08:10,559 --> 00:08:11,959] A: ok
119 [00:08:18,820 --> 00:08:20,220] E: ecco
120 [00:08:36,479 --> 00:08:36,900] A: ok
121 [00:08:48,719 --> 00:08:50,119] E: ecco
122 [00:09:18,820 --> 00:09:21,119] E: that's ok
123 [00:09:20,780 --> 00:09:22,179] A: ok
124 [00:09:23,119 --> 00:09:34,200] E: Now you can do what you are doing first, insert the pieces we mounted before, on the holes, which are obliged
125 [00:09:28,739 --> 00:09:30,840] A: ok ok
126 [00:09:36,479 --> 00:09:39,140] A: This here? or here?
127 [00:09:39,760 --> 00:09:41,080] E: exactly, where you have your holes,
128 [00:09:40,260 --> 00:09:41,039] A: In the part hits?
129 [00:09:42,539 --> 00:09:43,659] E: And
130 [00:09:43,780 --> 00:09:49,419] E: Now you see, that you have two chopsticks a raw one you have in your hand this goes to the side behind,
131 [00:09:46,460 --> 00:09:47,859] A: and
132 [00:09:50,380 --> 00:09:53,940] E: The behind the side is this here, see that there is the left side,
133 [00:09:51,059 --> 00:09:52,539] A: that would be
134 [00:09:54,440 --> 00:09:55,840] A: This?
135 [00:09:55,760 --> 00:09:59,239] E: Exactly you see that there is always a large hole and a smaller one,
136 [00:09:58,020 --> 00:10:01,440] A: ok this above?
137 [00:10:01,559 --> 00:10:03,299] E: no below, below, below,
138 [00:10:03,000 --> 00:10:03,280] A: no,
139 [00:10:03,539 --> 00:10:04,640] E: this here,
140 [00:10:03,679 --> 00:10:04,340] A: No, this?
141 [00:10:05,219 --> 00:10:07,380] E: exactly him, then engrave,
142 [00:10:08,260 --> 00:10:10,760] E: and the last at the bottom,
143 [00:10:11,179 --> 00:10:12,580] A: ok
144 [00:10:11,299 --> 00:10:14,559] E: Same thing, small hole, small hole, large hole, with the large hole,
145 [00:10:17,200 --> 00:10:18,000] E: ok
146 [00:10:17,559 --> 00:10:18,960] A: ok
147 [00:10:18,460 --> 00:10:20,780] E: Now take the other part
148 [00:10:21,340 --> 00:10:24,700] E: And you can close it a hat, you can turn it up,
149 [00:10:25,219 --> 00:10:29,539] A: This white part goes outside,
150 [00:10:29,679 --> 00:10:31,280] E: the outside,
151 [00:10:31,679 --> 00:10:32,479] E: Exactly,
152 [00:10:33,299 --> 00:10:34,000] A: only
153 [00:10:33,359 --> 00:10:34,219] E: see that
154 [00:10:34,580 --> 00:10:37,299] E: ok perfect have the holes engraved,
155 [00:10:37,400 --> 00:10:42,359] E: On the contrary, you see that there is the raw part on the right side, turns, turns,
156 [00:10:42,799 --> 00:10:43,619] E: Perfect,
157 [00:10:44,099 --> 00:10:45,500] A: ok
158 [00:10:44,419 --> 00:10:46,440] E: have the holes engraved now
159 [00:10:47,799 --> 00:10:49,200] A: ok
160 [00:11:08,580 --> 00:11:09,979] A: quasi
161 [00:11:10,479 --> 00:11:12,599] E: perfect, go, perfect,
162 [00:11:11,140 --> 00:11:12,780] A: Can I go with the hammer?
163 [00:11:13,940 --> 00:11:21,119] E: Then the outside should enter quite easily, perfect, that's okay, then see the two holes that remained,
164 [00:11:16,940 --> 00:11:17,280] A: ok
165 [00:11:21,479 --> 00:11:22,359] A: this,
166 [00:11:21,719 --> 00:11:22,659] E: on sight,
167 [00:11:22,500 --> 00:11:23,760] A: This, yes?
168 [00:11:23,119 --> 00:11:26,340] E: that's right, if you come back to the greenhouse you have bubbles
169 [00:11:26,919 --> 00:11:27,559] E: long,
170 [00:11:29,520 --> 00:11:29,979] A: This?
171 [00:11:30,159 --> 00:11:30,799] E: Exactly,
172 [00:11:31,280 --> 00:11:32,559] E: sell them in two,
173 [00:11:33,340 --> 00:11:36,039] E: one goes here and one goes to the other hole,
174 [00:11:37,219 --> 00:11:41,900] E: To screw you have to help you with that hexagonal key, which you see in the shape of
175 [00:11:42,559 --> 00:11:44,320] E: This here, no,
176 [00:11:44,080 --> 00:11:45,479] A: no
177 [00:11:44,739 --> 00:11:48,099] E: See the key that has a shape
178 [00:11:46,239 --> 00:11:47,640] A: this?
179 [00:11:48,700 --> 00:11:50,799] E: elongated s type, exactly,
180 [00:11:49,880 --> 00:11:51,280] A: This?
181 [00:11:53,479 --> 00:11:54,530] E: now screwing
182 [00:11:56,799 --> 00:12:03,039] E: And always check if you caught the hole, if you put it straight or not, I don't see it,
183 [00:12:02,919 --> 00:12:04,320] A: and
184 [00:12:04,090 --> 00:12:07,119] E: So if you see that he is going down, ok, perfect, he is screwing
185 [00:12:04,619 --> 00:12:06,840] A: it seems yes yes ok ok
186 [00:12:13,520 --> 00:12:14,419] E: same
187 [00:12:23,659 --> 00:12:24,260] E: on the other
188 [00:12:31,039 --> 00:12:35,080] E: Then the same operation, we have to do it on the other side, then turn it on the contrary,
189 [00:12:43,979 --> 00:12:46,739] E: same operation, two bubbles and then
190 [00:12:46,700 --> 00:12:48,099] A: ok
191 [00:13:26,320 --> 00:13:27,719] A: ok
192 [00:13:28,140 --> 00:13:30,039] E: ok, now you can take
193 [00:13:30,239 --> 00:13:34,000] E: Near the tools, there are four plastic feet
194 [00:13:39,340 --> 00:13:40,099] A: ok
195 [00:13:40,260 --> 00:13:42,960] E: The lower part is immobile has holes,
196 [00:13:44,020 --> 00:13:45,020] E: You can insert them
197 [00:13:44,799 --> 00:13:45,559] A: via
198 [00:13:46,219 --> 00:13:47,679] E: they should enter with the
199 [00:13:46,599 --> 00:13:47,380] A: Also above?
200 [00:13:48,260 --> 00:13:51,919] E: you should also enter with the hands,
201 [00:13:51,599 --> 00:13:51,739] A: and
202 [00:13:51,960 --> 00:13:52,719] A: I'm also a bit
203 [00:13:52,799 --> 00:13:53,619] E: a bit
204 [00:13:52,820 --> 00:13:53,280] A: les
205 [00:13:53,820 --> 00:13:56,219] E: slow, yes because it was, ah sorry,
206 [00:13:56,419 --> 00:13:57,679] E: forgive me, turn on the contrary
207 [00:14:00,599 --> 00:14:01,359] A: Wait
208 [00:14:01,000 --> 00:14:04,419] E: What you were touching is the above part,
209 [00:14:05,080 --> 00:14:10,559] E: turn, turn, not really 180 ° do the part below,
210 [00:14:10,760 --> 00:14:13,039] E: Tour, turn, on the contrary,
211 [00:14:12,880 --> 00:14:14,200] A: Like this
212 [00:14:14,030 --> 00:14:15,340] E: exact, wheel, wheel,
213 [00:14:16,059 --> 00:14:17,380] A: Still?
214 [00:14:16,349 --> 00:14:17,460] E: wheel, wheel,
215 [00:14:18,289 --> 00:14:21,900] E: exactly, he stops like this, this is the part below,
216 [00:14:19,799 --> 00:14:20,099] A: ah ok
217 [00:14:20,659 --> 00:14:25,599] A: So here, here, here, ok
218 [00:14:23,460 --> 00:14:27,520] E: Exactly they should be closer in fact, in fact,
219 [00:14:25,719 --> 00:14:27,039] A: and,
220 [00:14:27,200 --> 00:14:27,840] A: now better
221 [00:14:28,210 --> 00:14:28,760] E: ok,
222 [00:14:40,919 --> 00:14:44,820] E: Okay now you can put it on the feet and now let's go to the part above
223 [00:14:43,260 --> 00:14:44,659] A: ok
224 [00:14:47,820 --> 00:14:48,380] E: You can raise it,
225 [00:14:49,840 --> 00:14:50,400] E: ok,
226 [00:14:50,799 --> 00:14:55,559] E: See that last piece that has remained square, exactly behind it is immobile
227 [00:14:53,580 --> 00:14:55,940] A: This here?
228 [00:14:56,119 --> 00:14:57,940] E: That's right, take it in front,
229 [00:14:59,000 --> 00:15:01,260] A: do this put it back?
230 [00:15:01,159 --> 00:15:03,159] E: yes you can put it, you can move it, yes
231 [00:15:02,340 --> 00:15:03,039] A: ok
232 [00:15:06,400 --> 00:15:10,219] E: then here too you see that you have two holes, one small and one large,
233 [00:15:10,880 --> 00:15:12,280] A: and
234 [00:15:11,020 --> 00:15:17,119] E: Then a long screw goes on the small hole, see that long screw, with the gray plastic part,
235 [00:15:17,299 --> 00:15:18,000] A: This?
236 [00:15:18,359 --> 00:15:18,919] E: Exactly,
237 [00:15:19,400 --> 00:15:20,520] E: take two
238 [00:15:22,260 --> 00:15:23,299] A: Do I put it on the large hole or on the baby?
239 [00:15:23,479 --> 00:15:24,599] E: On the small one,
240 [00:15:24,799 --> 00:15:26,039] E: So small hole,
241 [00:15:26,200 --> 00:15:28,140] E: you have to screw this screw here,
242 [00:15:27,940 --> 00:15:28,640] A: ok
243 [00:15:29,020 --> 00:15:30,880] E: always help you with the ride of cross screw,
244 [00:15:57,820 --> 00:15:58,700] E: ok,
245 [00:15:58,900 --> 00:16:02,919] E: Now take the wooden spines, two wooden spines,
246 [00:16:02,780 --> 00:16:04,179] A: This
247 [00:16:05,020 --> 00:16:12,280] E: exactly, and put them on the large hole that has remained free, yes
248 [00:16:05,840 --> 00:16:06,280] A: and
249 [00:16:11,500 --> 00:16:11,700] A: also below
250 [00:16:13,659 --> 00:16:19,219] E: Now you can put it a hat on the bedside table, if you see there are holes,
251 [00:16:23,020 --> 00:16:25,140] E: Make the holes coincide, and close it,
252 [00:16:30,960 --> 00:16:31,760] A: This is a conciga
253 [00:16:31,820 --> 00:16:32,340] E: At that time
254 [00:16:33,599 --> 00:16:36,559] E: Remove it for a moment, place it again on the table this piece,
255 [00:16:37,080 --> 00:16:39,719] E: See that the left side is a bit open,
256 [00:16:37,320 --> 00:16:39,659] A: Do I have to tighten here?
257 [00:16:39,840 --> 00:16:41,440] E: Just hold it with your hands
258 [00:16:42,400 --> 00:16:42,919] E: and closes,
259 [00:16:44,520 --> 00:16:45,820] E: Now you can redo
260 [00:16:46,520 --> 00:16:47,619] E: You can put it back,
261 [00:17:03,960 --> 00:17:04,760] E: ok,
262 [00:17:06,839 --> 00:17:08,680] E: Now if you look inside
263 [00:17:08,020 --> 00:17:09,420] A: ok
264 [00:17:08,859 --> 00:17:11,339] E: there are plastic compresses,
265 [00:17:12,839 --> 00:17:14,520] E: See that there is a hole,
266 [00:17:13,119 --> 00:17:14,920] A: This below?
267 [00:17:15,119 --> 00:17:18,560] E: That's right, with the lap of cut screw
268 [00:17:17,599 --> 00:17:19,000] A: ok
269 [00:17:19,479 --> 00:17:20,880] A: This?
270 [00:17:19,739 --> 00:17:20,540] E: Italian,
271 [00:17:21,479 --> 00:17:26,859] E: You have to go around them, you have to do half a ride clockwise so that it closes
272 [00:17:23,459 --> 00:17:24,859] A: ok
273 [00:17:27,239 --> 00:17:29,319] A: Can I shoot this for a moment?
274 [00:17:27,439 --> 00:17:31,260] E: This bussolotto, put it as it is more comfortable,
275 [00:17:37,160 --> 00:17:38,560] A: ok
276 [00:17:37,619 --> 00:17:42,079] E: exact, same thing on the other side,
277 [00:17:42,739 --> 00:17:43,859] E: clockwise,
278 [00:17:49,280 --> 00:17:51,040] E: give a blow because he opened,
279 [00:17:53,479 --> 00:17:54,599] E: See that it has opened
280 [00:17:54,819 --> 00:17:55,640] E: All right,
281 [00:17:57,420 --> 00:17:58,020] E: ok,
282 [00:17:58,780 --> 00:17:59,599] E: has arrived,
283 [00:18:00,219 --> 00:18:01,420] E: is fine,
284 [00:18:01,699 --> 00:18:02,300] E: ok,
285 [00:18:02,000 --> 00:18:03,959] A: I get it back?
286 [00:18:04,180 --> 00:18:07,699] E: You can't leave it even so because now, we have to put the backrest,
287 [00:18:05,920 --> 00:18:06,619] A: ok
288 [00:18:08,199 --> 00:18:10,180] E: go back to the pieces that remained there,
289 [00:18:10,500 --> 00:18:12,219] E: that's right, see that there have,
290 [00:18:13,780 --> 00:18:15,719] E: This back here
291 [00:18:14,900 --> 00:18:16,300] A: and
292 [00:18:16,079 --> 00:18:18,579] E: must be nailed on the upper part,
293 [00:18:19,060 --> 00:18:20,180] E: So I put it,
294 [00:18:20,500 --> 00:18:23,280] E: that's right, see that C has a shape, exactly,
295 [00:18:22,939 --> 00:18:24,339] A: ok
296 [00:18:25,000 --> 00:18:28,640] E: Make the four sides coincide inside the structure
297 [00:18:28,839 --> 00:18:30,239] A: ok
298 [00:18:30,060 --> 00:18:35,900] E: And now you can put four nails, four nails, take the nails, which there always have on the hardware store,
299 [00:18:39,839 --> 00:18:40,719] E: martellino,
300 [00:18:42,000 --> 00:18:44,300] E: even a little more on exactly,
301 [00:18:42,859 --> 00:18:44,339] A: here to the corner?
302 [00:18:45,760 --> 00:18:47,160] A: ok
303 [00:18:51,520 --> 00:18:52,920] A: ok
304 [00:18:58,680 --> 00:18:59,199] E: ecco
305 [00:18:59,459 --> 00:19:01,079] E: You can put two on each side,
306 [00:19:04,579 --> 00:19:05,280] A: ok
307 [00:19:08,859 --> 00:19:10,260] A: ok
308 [00:19:41,000 --> 00:19:42,400] E: ecco
309 [00:19:52,739 --> 00:19:53,780] E: All right,
310 [00:19:53,579 --> 00:19:54,979] A: ok
311 [00:19:55,520 --> 00:19:58,119] E: You can raise it and put it aside
312 [00:20:08,739 --> 00:20:09,439] E: that we now mount the drawers
313 [00:20:10,300 --> 00:20:11,699] A: ok
314 [00:20:10,459 --> 00:20:13,540] E: ok, go back to the pieces you find to your right,
315 [00:20:13,560 --> 00:20:16,359] A: These here?
316 [00:20:14,760 --> 00:20:15,459] E: ok,
317 [00:20:15,959 --> 00:20:17,219] E: that's right, take this,
318 [00:20:19,160 --> 00:20:22,219] E: same thing, you see that C has large holes and small holes,
319 [00:20:20,280 --> 00:20:20,880] A: ok
320 [00:20:21,280 --> 00:20:22,680] A: and,
321 [00:20:22,880 --> 00:20:23,500] A: I take this
322 [00:20:24,459 --> 00:20:26,400] E: large holes and the wooden spinet,
323 [00:20:28,939 --> 00:20:29,420] E: Exactly
324 [00:20:36,760 --> 00:20:40,780] E: In the small hole the screw is long with the plastic piece,
325 [00:20:40,459 --> 00:20:41,859] A: ok
326 [00:20:46,979 --> 00:20:48,300] A: Can I already screw?
327 [00:20:48,739 --> 00:20:49,439] E: Yes, yes,
328 [00:20:49,400 --> 00:20:49,760] A: and
329 [00:21:11,160 --> 00:21:12,579] A: ok ok
330 [00:21:13,319 --> 00:21:13,880] E: ok,
331 [00:21:14,760 --> 00:21:16,040] E: now always on the right side
332 [00:21:16,319 --> 00:21:18,579] E: In the pieces you have on the right, exactly,
333 [00:21:19,660 --> 00:21:22,900] E: Take the others, see that there are, these bands,
334 [00:21:24,680 --> 00:21:26,959] E: that's right, and turn it so that I see the holes,
335 [00:21:26,479 --> 00:21:27,359] A: and
336 [00:21:28,040 --> 00:21:28,599] E: no
337 [00:21:28,780 --> 00:21:30,619] E: turn it up, show the tip,
338 [00:21:31,099 --> 00:21:32,699] E: that's right, it turns, again,
339 [00:21:33,660 --> 00:21:39,260] E: Turn, turn, so that you show the holes, that you have on the side on the side see that there are some holes, here they are,
340 [00:21:37,900 --> 00:21:38,780] A: ok
341 [00:21:40,319 --> 00:21:45,020] E: Perfect, see that C always have three holes, make it coincide now though, see the line that there is
342 [00:21:43,859 --> 00:21:44,739] A: and
343 [00:21:46,579 --> 00:21:47,280] E: no
344 [00:21:47,319 --> 00:21:49,359] A: this outside here
345 [00:21:47,500 --> 00:21:49,180] E: run looks, exactly,
346 [00:21:49,560 --> 00:21:51,540] E: This is the inside of the drawer,
347 [00:21:50,640 --> 00:21:51,800] A: inside,
348 [00:21:52,040 --> 00:21:52,439] A: So so
349 [00:21:52,150 --> 00:21:56,380] E: then he must coincide with the other line, see the line, of the front,
350 [00:21:53,500 --> 00:21:56,500] A: and so
351 [00:21:56,540 --> 00:21:59,359] E: So exactly, you have to make the lines coincide,
352 [00:22:01,579 --> 00:22:03,020] E: You can insert it,
353 [00:22:05,579 --> 00:22:08,459] A: Ok, there is another equal?
354 [00:22:07,219 --> 00:22:09,739] E: You can insert it, the same with the other equal,
355 [00:22:09,939 --> 00:22:14,880] E: Always make the lines coincide
356 [00:22:15,180 --> 00:22:15,859] E: ok,
357 [00:22:15,640 --> 00:22:16,800] A: ok,
358 [00:22:16,119 --> 00:22:21,520] E: See that bussolotto that there is metal now, the same thing you did before, you can go,
359 [00:22:19,859 --> 00:22:21,680] A: Is the appearance the same?
360 [00:22:21,780 --> 00:22:25,439] E: no it is already mounted, on the piece you have just mounted,
361 [00:22:24,349 --> 00:22:26,199] A: Ah this side by side,
362 [00:22:25,599 --> 00:22:26,280] E: Exactly
363 [00:22:27,180 --> 00:22:28,040] E: Yes, you can close it
364 [00:22:27,239 --> 00:22:31,119] A: ok
365 [00:22:28,300 --> 00:22:32,780] E: With the swivel, always, the swivel, with the swivel, always,
366 [00:22:32,959 --> 00:22:33,719] E: Exactly,
367 [00:22:34,180 --> 00:22:36,579] E: make him do half a round clockwise,
368 [00:22:36,900 --> 00:22:37,660] E: Perfect,
369 [00:22:38,079 --> 00:22:39,459] A: ok
370 [00:22:39,479 --> 00:22:45,680] E: ok, same thing to the other side,
371 [00:22:47,099 --> 00:22:51,000] E: Ok, on the left, there are those backs, see the one on the left, left,
372 [00:22:52,640 --> 00:22:55,099] E: ok, these are the backs of the drawers,
373 [00:22:55,300 --> 00:23:00,560] E: The white side goes inside, and you can insert it here,
374 [00:22:55,979 --> 00:22:57,380] A: ok
375 [00:23:02,619 --> 00:23:04,260] E: the white inside,
376 [00:23:06,719 --> 00:23:07,359] E: Exactly,
377 [00:23:11,439 --> 00:23:12,839] A: ok
378 [00:23:12,319 --> 00:23:14,979] E: Perfect, now it goes to the closure of the drawer
379 [00:23:15,760 --> 00:23:19,140] E: that if I'm not mistaken it should be this piece you have right on the left,
380 [00:23:19,540 --> 00:23:20,359] E: Near your drawer,
381 [00:23:20,180 --> 00:23:21,739] A: This here?
382 [00:23:20,939 --> 00:23:21,579] E: Exactly,
383 [00:23:21,719 --> 00:23:23,140] E: This is the cap
384 [00:23:23,339 --> 00:23:23,619] E: let's say
385 [00:23:23,760 --> 00:23:28,099] E: above, from behind, always look, the line that must coincide,
386 [00:23:28,400 --> 00:23:32,800] A: ok how I join it?
387 [00:23:31,020 --> 00:23:31,660] E: Perfect,
388 [00:23:32,939 --> 00:23:33,739] E: You insert it,
389 [00:23:34,160 --> 00:23:39,199] A: Ah only inside, the ok
390 [00:23:34,219 --> 00:23:35,160] E: See that it is inside,
391 [00:23:36,160 --> 00:23:36,800] E: Exactly,
392 [00:23:37,000 --> 00:23:37,640] E: ora
393 [00:23:38,260 --> 00:23:43,819] E: On the greenhouse you are found some plastic spines, look, those plastic spines,
394 [00:23:41,920 --> 00:23:46,920] A: Is this long? eh
395 [00:23:43,939 --> 00:23:44,579] E: Exactly
396 [00:23:44,739 --> 00:23:45,520] E: yes, you can insert it,
397 [00:23:45,739 --> 00:23:46,339] E: See the hole,
398 [00:23:46,760 --> 00:23:48,920] E: and make it coincide with the other side,
399 [00:23:49,180 --> 00:23:50,280] E: You see that you enter,
400 [00:23:50,900 --> 00:23:54,000] E: We don't like that you let everything in, it is enough for him,
401 [00:23:51,619 --> 00:23:54,500] A: ah ok ok so
402 [00:23:54,280 --> 00:23:54,760] E: Exactly,
403 [00:23:54,979 --> 00:23:56,599] E: does the same thing about all four,
404 [00:23:56,900 --> 00:23:58,339] E: You see that C has four, holes,
405 [00:23:58,739 --> 00:23:59,500] A: and
406 [00:23:59,660 --> 00:24:00,619] E: two, and two,
407 [00:24:01,400 --> 00:24:06,739] E: same thing to the other, side,
408 [00:24:13,079 --> 00:24:15,699] E: Now then you help you with the hammer, but put the other too,
409 [00:24:24,520 --> 00:24:25,380] E: ok
410 [00:24:25,780 --> 00:24:28,560] E: with the hammer now,
411 [00:24:30,520 --> 00:24:32,099] E: exact, hammer
412 [00:24:32,760 --> 00:24:34,079] E: exactly, keeping the piece to the other side,
413 [00:24:52,040 --> 00:24:53,479] A: ok I'm going
414 [00:25:04,099 --> 00:25:05,500] A: ok
415 [00:25:04,199 --> 00:25:04,880] E: ok,
416 [00:25:06,339 --> 00:25:07,880] E: And this is the first drawer,
417 [00:25:08,040 --> 00:25:11,119] E: You can already insert it if you want,
418 [00:25:12,640 --> 00:25:16,819] E: the drawer, higher if I remember correctly goes below, put it below,
419 [00:25:15,819 --> 00:25:17,520] A: ok ok
420 [00:25:24,380 --> 00:25:27,739] E: After we get there, in the meantime we mount the other, now I'll show you,
421 [00:25:24,780 --> 00:25:26,180] A: ok
422 [00:25:28,060 --> 00:25:30,619] E: mounts the other, drawer,
423 [00:25:32,439 --> 00:25:33,839] A: Too bad it goes
424 [00:25:34,459 --> 00:25:35,780] E: same thing as before,
425 [00:25:35,739 --> 00:25:37,140] A: and
426 [00:25:36,199 --> 00:25:37,140] E: wooden spinet,
427 [00:25:53,719 --> 00:25:55,140] A: ok ok
428 [00:25:56,640 --> 00:25:58,040] E: and
429 [00:26:12,060 --> 00:26:13,800] E: The two lateral ones
430 [00:26:15,140 --> 00:26:15,180] E: Exactly,
431 [00:26:22,780 --> 00:26:24,180] E: and
432 [00:26:24,719 --> 00:26:26,119] E: Exactly
433 [00:26:34,140 --> 00:26:35,599] A: ok ok
434 [00:26:35,140 --> 00:26:39,199] E: Close the compass, metal,
435 [00:26:37,900 --> 00:26:40,300] A: right, this
436 [00:26:41,140 --> 00:26:42,640] E: half around,
437 [00:26:50,400 --> 00:26:51,140] E: ok, ok,
438 [00:26:51,560 --> 00:26:57,680] E: the backrest, what is the last that has remained,
439 [00:27:01,800 --> 00:27:03,880] A: ok the white part inside
440 [00:27:04,300 --> 00:27:07,420] E: internal white, yes
441 [00:27:08,959 --> 00:27:11,560] E: that's right, the part of the drawer behind
442 [00:27:20,439 --> 00:27:21,839] A: ok
443 [00:27:39,099 --> 00:27:40,579] E: and the plastic spines
444 [00:27:47,959 --> 00:27:49,359] A: Can I go with the hammer?
445 [00:27:49,020 --> 00:27:49,500] E: and
446 [00:27:50,699 --> 00:27:51,780] E: If the spinet has entered
447 [00:27:51,939 --> 00:27:52,420] E: controllala,
448 [00:27:52,599 --> 00:27:56,500] E: If you turn it on the contrary, turn on the contrary, the drawer so that I see it too,
449 [00:27:57,699 --> 00:27:58,180] E: ok
450 [00:27:58,319 --> 00:27:58,619] E: entered,
451 [00:27:59,079 --> 00:27:59,699] E: yes, you can hammer,
452 [00:27:59,699 --> 00:27:59,979] A: ok
453 [00:28:31,660 --> 00:28:33,060] A: ok
454 [00:28:32,719 --> 00:28:33,680] E: ok,
455 [00:28:34,359 --> 00:28:36,500] E: Let's go back to the drawer for a moment, the big one,
456 [00:28:36,839 --> 00:28:37,800] E: go out we see why it doesn't enter
457 [00:28:40,920 --> 00:28:41,359] E: ok,
458 [00:28:41,560 --> 00:28:47,459] E: See that there are guides, you have to make sure that the guides coincide, with the flexing that is on the side, see that on the side, there is the drawer,
459 [00:28:48,900 --> 00:28:52,119] E: That's right if it coincides should enter, it's a little hard but don't worry,
460 [00:28:54,839 --> 00:28:55,280] E: Perfect,
461 [00:28:54,859 --> 00:28:56,260] A: ok
462 [00:28:55,619 --> 00:28:56,939] E: same thing with the other drawer,
463 [00:29:03,540 --> 00:29:04,160] E: ok,
464 [00:29:04,819 --> 00:29:11,099] E: last thing to assemble are those nightlies, he returns to the Serramento, see that there are nights, plastic
465 [00:29:05,060 --> 00:29:06,459] A: ok
466 [00:29:10,339 --> 00:29:11,739] A: ok
467 [00:29:11,300 --> 00:29:11,920] E: round,
468 [00:29:12,400 --> 00:29:14,619] E: that's right, take all four,
469 [00:29:14,180 --> 00:29:15,579] A: ok
470 [00:29:15,439 --> 00:29:18,079] E: Ok, open the drawer in half,
471 [00:29:19,719 --> 00:29:20,339] E: you see
472 [00:29:20,479 --> 00:29:21,060] E: are those holes,
473 [00:29:21,180 --> 00:29:25,260] E: No, enter it a little, enter yes, you have to enter the drawer, exactly, exactly,
474 [00:29:21,880 --> 00:29:23,280] A: This?
475 [00:29:25,300 --> 00:29:25,880] A: Like this,
476 [00:29:26,239 --> 00:29:29,020] E: Now don't worry you have to insert those
477 [00:29:29,500 --> 00:29:31,880] E: night on the two holes you find,
478 [00:29:33,420 --> 00:29:36,319] E: If they don't enter with your hands you help you with your run,
479 [00:29:46,939 --> 00:29:47,459] E: Exactly,
480 [00:29:47,560 --> 00:29:48,920] E: go to screw it,
481 [00:29:58,900 --> 00:29:59,699] E: All right
482 [00:30:10,839 --> 00:30:12,300] A: ok this can't open it more?
483 [00:30:13,180 --> 00:30:13,579] E: no,
484 [00:30:13,699 --> 00:30:18,900] E: Because that is the blocking of the drawer, practically, it does not let you out, the whole drawer, if not, if the children pull it on,
485 [00:30:30,699 --> 00:30:35,160] E: Yes, you can go out a little more, maybe a little more
486 [00:30:33,400 --> 00:30:35,199] A: if not, can I turn it?
487 [00:30:35,780 --> 00:30:37,079] E: yes, yes, put it as you are better,
488 [00:30:37,400 --> 00:30:37,859] E: And, and,
489 [00:30:40,540 --> 00:30:41,619] A: Let's see if that's the case
490 [00:30:54,339 --> 00:30:54,839] E: Perfect,
491 [00:30:55,339 --> 00:30:56,739] A: ok
492 [00:30:55,479 --> 00:30:58,479] E: same thing about the other drawer, but leave it so it is better to you,
493 [00:30:57,719 --> 00:30:59,119] A: ok
494 [00:30:59,979 --> 00:31:02,959] E: And so, you also mount the others,
495 [00:31:05,560 --> 00:31:09,619] E: You can open it a little more, however, you can open a little more, just like this,
496 [00:31:06,619 --> 00:31:10,020] A: ok ok ok
497 [00:31:09,760 --> 00:31:10,739] E: more or less in half,
498 [00:31:23,540 --> 00:31:24,939] A: ok
500 [00:31:51,060 --> 00:31:52,020] E: finished
501 [00:31:52,380 --> 00:31:53,780] A: Perfect
502 [00:31:55,300 --> 00:32:01,540] E: You can go back to see the code, at the bar and make the front of the upside down, the QR code
503 [00:31:59,719 --> 00:32:01,119] A: ok