EgoExtra / transcript /eng /03 /03_049_transcript.txt
SitongGong's picture
Add files using upload-large-folder tool
be5cfe4 verified
1 [00:00:00,000 --> 00:00:15,140] A: four two right before the chair ok
2 [00:00:04,100 --> 00:00:09,720] E: three one go go
3 [00:00:12,580 --> 00:00:14,060] E: first the chair yes
4 [00:00:16,879 --> 00:00:18,320] E: I'm starting to have all the pieces come out
5 [00:00:31,000 --> 00:00:46,380] A: I can sit there is a part I have to start from the sitting of the feet
6 [00:00:36,560 --> 00:00:52,320] E: as is most comfortable for you then you should start from the sides ok but you should put everything out of the box take the box off and let's start
7 [00:00:56,139 --> 00:00:58,959] A: ok I won't drop anything
8 [00:00:59,860 --> 00:01:02,500] E: Don't worry, remove the chair if it bothers you
9 [00:01:08,680 --> 00:01:20,339] E: ok then put the seat on the side ok you see that these two which are the sides of the chairs put them mirror to each other resting on the table frontally so good perfect
10 [00:01:21,660 --> 00:01:23,209] E: one next to the other
11 [00:01:27,919 --> 00:01:29,849] E: that's all the screws come out
12 [00:01:33,620 --> 00:01:34,279] E: ok
13 [00:01:37,639 --> 00:01:42,449] E: so if you see if you see there are holes in the chairs you see
14 [00:01:43,080 --> 00:01:44,959] A: if I go I haven't heard
15 [00:01:47,050 --> 00:01:53,250] E: choose one of the two sides of the chair ok if you see there are holes ok
16 [00:01:55,360 --> 00:01:56,760] A: and
17 [00:01:55,910 --> 00:02:16,610] E: in these ones here which are 3 if you pay attention there are a hole that is practically drilled in the front and back and the other two are full you can see inside there are the wooden pins in the one above and in the one below very good
18 [00:02:09,100 --> 00:02:15,419] A: ok so these
19 [00:02:21,880 --> 00:02:24,020] A: while life goes on here
20 [00:02:22,550 --> 00:02:37,289] E: same thing after after after after after it goes ok if you continue going up let's say towards the tip of the chair ok there are other holes a single one
21 [00:02:39,429 --> 00:02:40,050] E: ok
22 [00:02:42,410 --> 00:02:43,029] E: Exactly
23 [00:02:45,929 --> 00:02:51,369] E: and underneath there is another single see that right there another plug goes there ok
24 [00:02:51,690 --> 00:03:02,550] E: perfect now you have to take if you notice among the various wooden planks that are supplied ok there is the backrest
25 [00:03:05,070 --> 00:03:10,029] E: that's the seat the backrest and those other two pieces of wood you see
26 [00:03:10,910 --> 00:03:17,470] E: these two ok, this one which is the longest should be placed on the left side
27 [00:03:19,729 --> 00:03:27,070] E: but on the contrary in the sense I turn my head underneath perfect like this and you can insert it
28 [00:03:30,919 --> 00:03:42,039] A: do I make a face? ok I did it ok ok this little one
29 [00:03:34,869 --> 00:03:49,509] E: ok if it fits a little loosely it's normal because then it has to be tight with the waist ok same thing the shorter piece on the other side always with a turn on the bill it's so perfect for the one how you're putting it before it was perfect ok
30 [00:03:54,770 --> 00:04:06,910] E: ok the backrest is perfect if you place it in front of you in profile on one straight side on one more curved side if you place it in front of you in profile turn it around ok
31 [00:04:02,220 --> 00:04:07,580] A: so yes yes that's it
32 [00:04:08,130 --> 00:04:13,229] E: exactly ok the most curved part ok where your back rests ok
33 [00:04:14,570 --> 00:04:27,500] E: so you have to insert it into the holes above basically you have inserted the other pins if you see below there are three holes and one you can see exactly yes exactly yes
34 [00:04:22,700 --> 00:04:27,720] A: but here so ok
35 [00:04:33,970 --> 00:05:15,429] E: perfect now where these holes are, insert the other pins in the same way as you insert them on the chair, very good, you're going to insert them too much otherwise they won't be able to fit with the other side nothing don't worry don't worry don't worry that's enough you won't insert it from above you have to always kiss the holes with the pins
36 [00:05:40,119 --> 00:05:50,940] A: okay okay I didn't make it okay
37 [00:05:45,130 --> 00:06:33,470] E: ok now calm down it's normal because it happened now go and tighten with the screws these black ones here these black ones you insert them into the holes you see exactly and tighten them with the S-key the metal one you can see if you see there is a key no there is a S-key between the hardware store there is an S-key exactly with this one turn it clockwise if you want first turn it with your hand and then turn it with the key ok
38 [00:06:03,399 --> 00:06:14,000] A: I don't feel good with this one ah yes this one here
39 [00:07:06,109 --> 00:07:09,309] E: do the same thing on the other side then take the chair and turn it around
40 [00:07:38,559 --> 00:07:39,980] A: I scored a beep
41 [00:07:41,489 --> 00:07:52,769] E: no everything is fine you heard a beep okay don't worry
42 [00:07:42,179 --> 00:07:45,739] A: from the microphone, there is from the cap
43 [00:08:16,309 --> 00:08:18,929] E: ok now let's start the session
44 [00:08:27,429 --> 00:08:34,750] E: You should now put the seat and turn it with the backrest towards the outside of the table ok
45 [00:08:37,489 --> 00:09:08,250] E: very good turn it turn it turn it and place it on the table exactly ok if you pay attention ok now there are these if you see there are four holes above the seat you see perfect you have to take the little plastic squares these here ok which must be inserted on the side of the chair exactly
46 [00:08:49,179 --> 00:08:50,580] A: ok
47 [00:09:14,320 --> 00:09:15,719] A: Knows
48 [00:09:14,690 --> 00:09:25,090] E: good and you have to make the hole in the plastic square coincide with the hole in the seat ok then screw the screws
49 [00:09:26,979 --> 00:09:28,380] A: ok
50 [00:10:50,559 --> 00:10:55,580] A: ok done around
51 [00:10:52,369 --> 00:10:57,789] E: ok perfect you can go to the QR code no don't worry you can go to the QR code
52 [00:10:58,859 --> 00:11:00,200] A: ok and what should I do
53 [00:11:00,440 --> 00:11:04,000] A: I have to repeat more than 4
54 [00:11:00,989 --> 00:11:07,989] E: the countdown 3 1
55 [00:11:06,280 --> 00:11:06,580] A: 2