File size: 3,258 Bytes
d59bb1b |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 |
# Restructure
The restructure module in OpenROAD (`rmp`) is based on
an interface to ABC for local resynthesis. The package allows
logic restructuring that targets area or timing. It extracts a cloud of logic
using the OpenSTA timing engine, and passes it to ABC through `blif` interface.
Multiple recipes for area or timing are run to obtain multiple structures from ABC;
the most desirable among these is used to improve the netlist.
The ABC output is read back by a `blif` reader which is integrated to OpenDB.
`blif` writer and reader also support constants from and to OpenDB. Reading
back of constants requires insertion of tie cells which should be provided
by the user as per the interface described below.
## Commands
```{note}
- Parameters in square brackets `[-param param]` are optional.
- Parameters without square brackets `-param2 param2` are required.
```
### Restructure
Restructuring can be done in two modes: area or delay.
- Method 1: Area Mode
Example: `restructure -liberty_file ckt.lib -target area -tielo_pin ABC -tiehi_pin DEF`
- Method 2: Timing Mode
Example: `restructure -liberty_file ckt.lib -target delay -tielo_pin ABC -tiehi_pin DEF -slack_threshold 1 -depth_threshold 2`
```tcl
restructure
[-slack_threshold slack_val]
[-depth_threshold depth_threshold]
[-target area|delay]
[-abc_logfile logfile]
[-liberty_file liberty_file]
[-tielo_port tielo_pin_name]
[-tiehi_port tiehi_pin_name]
[-work_dir work_dir]
```
#### Options
| Switch Name | Description |
| ----- | ----- |
| `-liberty_file` | Liberty file with description of cells used in design. This is passed to ABC. |
| `-target` | Either `area` or `delay`. In area mode, the focus is area reduction, and timing may degrade. In delay mode, delay is likely reduced, but the area may increase. The default value is `area`. |
| `-slack_threshold` | Specifies a (setup) timing slack value below which timing paths need to be analyzed for restructuring. The default value is `0`, and the allowed values are floats `[0, MAX_FLOAT]`. |
| `-depth_threshold` | Specifies the path depth above which a timing path would be considered for restructuring. The default value is `16`, and the allowed values are `[0, MAX_INT]`. |
| `-tielo_pin` | Tie cell pin that can drive constant zero. The format is `<cell>/<port>`. |
| `-tiehi_pin` | Tie cell pin that can drive constant one. The format is `<cell>/<port>`. |
| `-abc_logfile` | Output file to save abc logs to. |
| `-work_dir` | Name of the working directory for temporary files. If not provided, `run` directory would be used. |
## Example scripts
Example scripts on running `rmp` for a sample design of `gcd` as follows:
```
./test/gcd_restructure.tcl
```
## Regression tests
There are a set of regression tests in `./test`. For more information, refer to this [section](../../README.md#regression-tests).
Simply run the following script:
```shell
./test/regression
```
## Limitations
## FAQs
Check out [GitHub discussion](https://github.com/The-OpenROAD-Project/OpenROAD/discussions/categories/q-a?discussions_q=category%3AQ%26A+restructure)
about this tool.
## Authors
- Sanjiv Mathur
- Ahmad El Rouby
## License
BSD 3-Clause License. See [LICENSE](LICENSE) file.
|