Update README.md

README.md

@@ -1,56 +1,55 @@
 Main protocol
 
 Performer: Hamza \
-Purpose / Hypothesis: To see pump height effect on signal.
+Purpose / Hypothesis: To see pump height effect on signal with stationary needles.
 
 Needle size: 22G
 Needle tip: Chiba
 
-Used Sensor : M.4.3.2
-Punctured Material: Foam
-Phantom setup: Foam wrapped around tube. Both wet and dry foam used. 
+Used Sensor : M.4.4.0.22G and M.4.4.1.22G \
+Punctured Material: Foam \
+Phantom setup: Foam wrapped around tube. Dry foam used. 
 
 
 
-![image](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/3dr4K9TdqeW31E1Ph_dfn.png)
+![b378dd1a-7d64-4041-b208-0cee68f8eafc](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/psXqFHnBSFDUG9GLgClKx.png)
 
 Extended:
 
-Pump was running at 22 rpm .Pattern box used for stable tube and known patter and distance from tube. 3 different height used. Needle holder and rpi was at another table in order to have no contact with phantom expect needle. \
-Table ---> Pump output same level as phantom input \
-1st Shelf ---> Pump output was 35 CM higher then phantom input \
-2nd Shelf ---> Pump output was 75 CM higher then phantom input 
+Pump was running at 22 rpm.  \
+Pattern box used for stable tube and known pattern and distance from tube. \
+2 differnt pump height used one was 1.5m and other one was same level as pattern box.
 
 
 
 
-![image](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/Md7aMm6XnGRYs0iKNkquq.png)
 
-Table level 
+![60e634a3-9af3-46c7-a4f4-4944512818dc](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/Dthzi4RmTObyatX4L4Fzw.png)
 
+1.5M high
 
 
-![image](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/-rV1bgGr6WIJN2IfIUwe7.png)
 
-1st Shelf Level
 
+![f2597f2c-281f-4c29-ae07-3095e03752f5](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/e4nnQX-hJkS8s8hCPB3ED.png)
 
+Same level
 
-![image](https://cdn-uploads.huggingface.co/production/uploads/6866bd792d33c8c807a05d45/REblm0ePGxbTVYiz2Ek6_.png)
 
-2nd Shelf Level
 
 
-
-We used 2 different point on pattern. 5G cell and abovetube. With 5G cell we had 3 different amount of needle shaft inside foam. 1cm , 2cm and 3cm mean how many cm of needle shaft was inside of foam during recording. For abovetube point we used 2 different size which were 1 cm and 2 cm.
+We used 2 different point on pattern. 5G cell and abovetube.
+With 5G cell we had 3 different amount of needle shaft inside foam. 1cm , 2cm and 3cm mean how many cm of needle shaft was inside of foam during recording.
+For abovetube point we used 2 different size which were 1 cm and 2 cm.
 
 Filename meaning: \
-5G_1CM_Table_Dry_foam_22g_Chiba_M.4.3.2_2025-09-24_12.49.17
+1.5m_elevated_1st__M.4.4.0_2nd_M.4.4.1_dry_foam_22g_chiba_2025-10-21_18.04.09
+
+level of pump-sensor-type-phantom-needle gauge-needle type_timestamp
 
-position-depth of the needle shaft inside foam-level of pump-phantom-needle gauge-needle type-sensor-type_timestamp
 
+M.4.4.0 Sensor placed on channel 0. On channel 1 M.4.4.1 microphone.
 
-Sensor places on channel 0. On channel 1 external microphone for sync sound detecting.
 
 Needle tracking protocol