Add agentic light source for ai_001_008

ai_001_008/agentic_light_source/48_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "LED diffuser panel",
+      "light_bulb_label": true,
+      "confidence": 0.88,
+      "evidence": "In the source image, the marked recessed linear ceiling fixture (red bounding box at top center) shows no visible luminous emission — the surrounding ceiling is uniformly neutral with no glow or bloom, indicating the light is off. The bottom-view segmentation reveals a solid rectangular red region covering the full emitter face, while the top view correctly captures two rectangular sub-panels matching the dual-diffuser structure of the linear fixture. Left, right, front, and back views all show a thin horizontal sliver consistent with a flat ceiling-flush geometry seen edge-on. The segmentation isolates the light-emitting diffuser panels without including the housing or recessed can structure.",
+      "view": "bottom",
+      "clicks_2d": [[200, 255], [250, 255], [300, 255], [200, 230], [300, 230]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/49_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": true,
+  "parts": [
+    {
+      "part_name": "recessed ceiling diffuser panel",
+      "light_bulb_label": true,
+      "confidence": 0.88,
+      "evidence": "In the source image, the red bounding box marks a flat recessed ceiling light panel that appears bright white and slightly luminous compared to the surrounding ceiling, indicating it is on. The segmentation from the bottom view, with clicks on the 4 rounded rectangular diffuser sub-panels, produces a solid red region in the bottom and top views covering the full fixture footprint, and thin red horizontal slivers in the left, right, front, and back views — geometrically consistent with a flat ceiling-mounted diffuser array. The critic approved the segmentation as correctly capturing the light-emitting face of the fixture.",
+      "view": "bottom",
+      "clicks_2d": [[180, 180], [320, 180], [180, 320], [320, 320], [256, 256]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/50_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "recessed downlight trim ring",
+      "light_bulb_label": true,
+      "confidence": 0.55,
+      "evidence": "In the source image, the red bounding box marks a ceiling-mounted dual-head recessed downlight fixture in the upper right. The apertures appear dark with no visible warm glow or emission, indicating the light is off. The mesh has no separate bulb glass geometry; the trim ring/bezel surrounding the left oval aperture is the closest available proxy for the bulb emitter. The segmentation (50_seg_top_left.png) shows a clean red ring tightly encircling the left oval aperture in both top and bottom views, with consistent thin horizontal bands in the left, front, and back views, confirming the selection is correctly bounded to the aperture-adjacent bezel surface.",
+      "view": "top",
+      "clicks_2d": [[155, 258], [165, 252], [160, 248], [170, 268]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/51_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "recessed ceiling light emitting panel",
+      "light_bulb_label": true,
+      "confidence": 0.85,
+      "evidence": "In the source image, the red bounding box marks a thin recessed ceiling fixture at the top center; the ceiling area around it shows no visible glow, illumination cone, or distinctive downward light emission — the room's lighting appears to originate from the cove light behind the TV wall rather than this fixture, indicating it is off. The bottom-view segmentation fully captures the light-emitting diffuser/panel face (entirely red in the bottom view), correctly excluding the housing back (top view is white); the side views show only a thin red edge strip consistent with the flat panel geometry seen edge-on, confirming complete and clean coverage of the emitting surface with no shade or mount contamination.",
+      "view": "bottom",
+      "clicks_2d": [[200, 256], [256, 256], [300, 256], [150, 256], [350, 256]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/52_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "recessed ceiling light diffuser/emitter panel",
+      "light_bulb_label": true,
+      "confidence": 0.55,
+      "evidence": "In the source image, the red bounding box marks a recessed ceiling light at the very top center of the scene. The fixture area shows no visible glow, bright emission, or halo — the ceiling around it is uniformly dark/neutral, confirming the light is off. The mesh is a single unified ceiling slab with the recessed light fixture integrated (no separate sub-component). The bottom-view segmentation (seg_bottom4.png) shows a compact horizontal red stripe centered on the recessed light slot — this is the visible face of the light diffuser/emitter. This is the most localized result among all segmentation attempts and correctly targets the emitter surface of the recessed ceiling light. The top-view full-ceiling red is a mesh topology constraint (single-component ceiling slab), not a segmentation error.",
+      "view": "bottom",
+      "clicks_2d": [[240, 243], [270, 243], [255, 248], [240, 255], [270, 255]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/53_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": true,
+  "parts": [
+    {
+      "part_name": "rectangular cove-light trim ring",
+      "light_bulb_label": true,
+      "confidence": 0.72,
+      "evidence": "In the source image, the red bounding box marks a ceiling-mounted recessed/cove light fixture near the upper-left of the scene. A warm glow is visible at the ceiling plane, confirming the light source is ON. The mesh contains only a rectangular ring/frame as its geometry — no separate inner bulb or diffuser mesh exists. The bottom-view segmentation captured the complete ring structure, confirmed as fully red in all six views: top and bottom show the complete ring perimeter, while left, right, front, and back show a thin horizontal red line (the correct edge-on appearance of a flat ring). This ring is the sole available mesh geometry for the fixture and is accepted as the best proxy for the light-emitting element.",
+      "view": "bottom",
+      "clicks_2d": [[200, 130], [320, 230], [200, 360], [90, 230], [265, 130]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/54_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "recessed downlight circular ring face and housing panel",
+      "light_bulb_label": true,
+      "confidence": 0.72,
+      "evidence": "In the source image, the red bounding box marks a small recessed ceiling downlight in the upper-left corner of the ceiling. The fixture aperture appears dark with no visible glow, emission halo, or bright center, indicating the light is OFF. The segmentation from the bottom view (clicking on the four quadrants of the circular ring, avoiding the cross-bar frame) selected the circular ring face and flat housing panels, visible as a fully-red circular shape in the top/bottom views and thin flat rectangular bars in the left/right/front/back views. This is the light-facing surface of the fixture and represents the closest available mesh proxy for the light-emitting element, as no separate inner emitter mesh exists in this simplified geometry.",
+      "view": "bottom",
+      "clicks_2d": [[256, 160], [215, 195], [256, 270]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/55_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": false,
+  "parts": [
+    {
+      "part_name": "circular ring emitter array",
+      "light_bulb_label": true,
+      "confidence": 0.88,
+      "evidence": "In the source image, the marked ceiling recessed fixture in the upper-left (red bounding box) shows no visible glow, bloom, or luminous emission — it appears dark and inactive. The mesh bottom view reveals a 2x2 grid of four circular ring emitter elements. Segmentation clicks placed on all four rings ([200,200], [280,200], [200,280], [280,280]) in the bottom view produced a clean result confirmed across all six views: the rings appear fully red in both top and bottom views, and a consistent small red bump (the raised ring geometry) appears in all four side views (left, right, front, back), while the flat fixture housing plate remains white and unselected.",
+      "view": "bottom",
+      "clicks_2d": [[200, 200], [280, 200], [200, 280], [280, 280]]
+    }
+  ]
+}

ai_001_008/agentic_light_source/56_part_info.json

@@ -0,0 +1,13 @@
+{
+  "is_light_on": true,
+  "parts": [
+    {
+      "part_name": "inner emitting panel",
+      "light_bulb_label": true,
+      "confidence": 0.9,
+      "evidence": "In the source image, the red bounding box marks a small rectangular recessed ceiling fixture in the top-left corner that appears bright white and luminous, indicating it is actively emitting light. The mesh visualization shows a flat wide rectangular panel with an outer frame and an inner recessed panel. The bottom-view segmentation with clicks on the inner panel cleanly fills the entire inner recessed surface in red across both top and bottom views, confirming this is the light-emitting face of the fixture. The outer frame is structural housing and was correctly excluded.",
+      "view": "bottom",
+      "clicks_2d": [[256, 200], [200, 200], [300, 200], [256, 250], [220, 250]]
+    }
+  ]
+}