`timescale 1ns / 1ps module testbench; reg [3:0] A; // First BCD input (4 bits) reg [3:0] B; // Second BCD input (4 bits) reg Cin; // Carry-in input (1 bit) wire [3:0] Sum; // BCD sum output (4 bits) wire Cout; // Carry-out output (1 bit) integer i; integer error = 0; reg [4:0] expected_sum; integer hA, hB, hC; // additional check: exhaustive loop indices adder_bcd uut ( .A(A), .B(B), .Cin(Cin), .Sum(Sum), .Cout(Cout) ); initial begin for (i = 0; i < 100; i = i + 1) begin A = $random % 10; B = $random % 10; Cin = $random % 2; if (A > 9) A = A % 10; if (B > 9) B = B % 10; // Wait for the operation to complete #10; expected_sum = A + B + Cin; // Adjust for BCD overflow (sum greater than 9) if (expected_sum > 9) begin expected_sum = expected_sum + 6; // Correct the sum for BCD end // Check the result of the BCD adder if ({Cout, Sum} !== expected_sum) begin error = error + 1; $display("Test failed: A = %d, B = %d, Cin = %d | Expected = %d, Got = %d, Cout = %d", A, B, Cin, expected_sum, Sum, Cout); end end // Additional checks: the spec defines A and B as decimal digits 0..9 and Cin as 1 bit; the random loop // above never drives sums 1, 17 or 19 (e.g. 9+9+1). Check every valid input combination (200 cases). for (hA = 0; hA < 10; hA = hA + 1) for (hB = 0; hB < 10; hB = hB + 1) for (hC = 0; hC < 2; hC = hC + 1) begin A = hA; B = hB; Cin = hC; #10; expected_sum = A + B + Cin; if (expected_sum > 9) expected_sum = expected_sum + 6; if ({Cout, Sum} !== expected_sum) begin error = error + 1; $display("HCHK exhaustive: A = %0d, B = %0d, Cin = %0d | Expected {Cout,Sum} = %b, Got Cout = %b Sum = %b", A, B, Cin, expected_sum, Cout, Sum); end end if (error == 0) begin $display("=========== Your Design Passed ==========="); end else begin $display("=========== Test completed with %d /100 failures ===========", error); end $finish; end endmodule