diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/alert_window_layer.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/alert_window_layer.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f9b38c8e57c453194420b17124897633bdc3ee67
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/alert_window_layer.xml
@@ -0,0 +1,24 @@
+<!--
+Copyright (C) 2017 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="24dp"
+        android:height="24dp"
+        android:viewportWidth="24.0"
+        android:viewportHeight="24.0">
+<path
+        android:fillColor="#FF000000"
+        android:pathData="M11.99,18.54l-7.37,-5.73L3,14.07l9,7 9,-7 -1.63,-1.27 -7.38,5.74zM12,16l7.36,-5.73L21,9l-9,-7 -9,7 1.63,1.27L12,16z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/android_logotype.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/android_logotype.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bd298e48ef341575856a70cdd7c5c3f0295d01e0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/android_logotype.xml
@@ -0,0 +1,42 @@
+<!--
+Copyright (C) 2015 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="290dp"
+        android:height="64dp"
+        android:viewportWidth="290.0"
+        android:viewportHeight="64.0">
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M21.81,28.91c-7.44,0,-12.45,5.85,-12.45,13.37c0,7.52,5.01,13.37,12.45,13.37s12.45,-5.85,12.45,-13.37   C34.26,34.76,29.24,28.91,21.81,28.91 M20.13,20.55c6.02,0,11.03,3.09,13.37,6.43v-5.6l9.19,0l0,41.78l-6.24,0   c-1.63,0,-2.95,-1.32,-2.95,-2.95v-2.65C31.17,60.91,26.15,64,20.14,64C8.69,64,0,54.23,0,42.28C0,30.33,8.69,20.55,20.13,20.55"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M53.13,21.39l9.19,0l0,5.68c2.5,-4.18,7.27,-6.52,12.7,-6.52c9.69,0,15.96,6.85,15.96,17.46l0,25.15l-6.24,0   c-1.63,0,-2.95,-1.32,-2.95,-2.95l0,-20.7c0,-6.6,-3.34,-10.61,-8.69,-10.61c-6.1,0,-10.78,4.76,-10.78,13.7l0,20.55l-6.25,0   c-1.63,0,-2.95,-1.32,-2.95,-2.95L53.13,21.39z"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M120.06,28.91c-7.43,0,-12.45,5.85,-12.45,13.37c0,7.52,5.01,13.37,12.45,13.37c7.43,0,12.45,-5.85,12.45,-13.37   C132.51,34.76,127.5,28.91,120.06,28.91 M118.39,20.55c6.02,0,11.03,3.09,13.37,6.43l0,-26.49l9.19,0l0,62.66h-6.24   c-1.63,0,-2.95,-1.32,-2.95,-2.95v-2.65c-2.34,3.34,-7.35,6.43,-13.37,6.43c-11.45,0,-20.14,-9.77,-20.14,-21.72   C98.25,30.33,106.94,20.55,118.39,20.55"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M151.39,21.39l9.19,0v7.44c1.59,-4.76,6.27,-7.86,11.03,-7.86c1.17,0,2.34,0.08,3.59,0.34v9.44c-1.59,-0.5,-2.92,-0.75,-4.59,-0.75   c-5.26,0,-10.03,4.43,-10.03,12.78l0,20.39l-6.24,0c-1.63,0,-2.95,-1.32,-2.95,-2.95L151.39,21.39z"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M199.98,55.48c7.35,0,12.53,-5.77,12.53,-13.2c0,-7.44,-5.18,-13.2,-12.53,-13.2c-7.44,0,-12.62,5.77,-12.62,13.2   C187.37,49.71,192.55,55.48,199.98,55.48 M199.98,64c-12.37,0,-21.89,-9.61,-21.89,-21.72c0,-12.12,9.52,-21.73,21.89,-21.73   c12.37,0,21.89,9.61,21.89,21.73C221.87,54.39,212.35,64,199.98,64"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M229.32,21.39l9.19,0l0,41.78l-6.24,0c-1.63,0,-2.95,-1.32,-2.95,-2.95L229.32,21.39z M233.92,12.28   c-3.34,0,-6.18,-2.76,-6.18,-6.18c0,-3.34,2.84,-6.1,6.18,-6.1c3.43,0,6.1,2.76,6.1,6.1C240.02,9.53,237.34,12.28,233.92,12.28"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M267.87,28.91c-7.43,0,-12.45,5.85,-12.45,13.37c0,7.52,5.01,13.37,12.45,13.37c7.44,0,12.45,-5.85,12.45,-13.37   C280.32,34.76,275.31,28.91,267.87,28.91 M266.2,20.55c6.02,0,11.03,3.09,13.37,6.43l0,-26.49l9.19,0l0,62.66l-6.24,0   c-1.63,0,-2.95,-1.32,-2.95,-2.95v-2.65c-2.34,3.34,-7.35,6.43,-13.37,6.43c-11.44,0,-20.14,-9.77,-20.14,-21.72S254.76,20.55,266.2,20.55"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_dial.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_dial.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5263218ef880db789bfff78e5447d7b06aacd0e3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_dial.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="utf-8"?>
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="380dp"
+    android:height="380dp"
+    android:viewportWidth="380"
+    android:viewportHeight="380">
+    <path
+        android:pathData="M177.389,2.803C185.381,-0.934 194.619,-0.934 202.611,2.803L231.193,16.169C234.358,17.649 237.76,18.56 241.242,18.861L272.677,21.577C281.467,22.336 289.468,26.956 294.52,34.188L312.59,60.054C314.591,62.919 317.081,65.409 319.946,67.41L345.812,85.48C353.044,90.533 357.664,98.533 358.423,107.323L361.139,138.758C361.44,142.24 362.351,145.642 363.832,148.807L377.197,177.389C380.934,185.381 380.934,194.619 377.197,202.611L363.832,231.193C362.351,234.359 361.44,237.76 361.139,241.242L358.423,272.677C357.664,281.467 353.044,289.468 345.812,294.52L319.946,312.59C317.081,314.591 314.591,317.081 312.59,319.946L294.52,345.812C289.468,353.044 281.467,357.664 272.677,358.423L241.242,361.139C237.76,361.44 234.359,362.351 231.193,363.832L202.611,377.197C194.619,380.934 185.381,380.934 177.389,377.197L148.807,363.832C145.642,362.351 142.24,361.44 138.758,361.139L107.323,358.423C98.533,357.664 90.533,353.044 85.48,345.812L67.41,319.946C65.409,317.081 62.919,314.591 60.054,312.59L34.188,294.52C26.956,289.468 22.336,281.467 21.577,272.677L18.861,241.242C18.56,237.76 17.649,234.359 16.169,231.193L2.803,202.611C-0.934,194.619 -0.934,185.381 2.803,177.389L16.169,148.807C17.649,145.642 18.56,142.24 18.861,138.758L21.577,107.323C22.336,98.533 26.956,90.533 34.188,85.48L60.054,67.41C62.919,65.409 65.409,62.919 67.41,60.054L85.48,34.188C90.533,26.956 98.533,22.336 107.323,21.577L138.758,18.861C142.24,18.56 145.642,17.649 148.807,16.169L177.389,2.803Z"
+        android:fillColor="@color/system_neutral1_200"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_hour.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_hour.xml
new file mode 100644
index 0000000000000000000000000000000000000000..de165a429a57849c4fae427ab9ce28f42ece2aab
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_hour.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="utf-8"?>
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="380dp"
+    android:height="380dp"
+    android:viewportWidth="380"
+    android:viewportHeight="380">
+    <path
+        android:pathData="M190,96L190,96A16,16 0,0 1,206 112L206,190A16,16 0,0 1,190 206L190,206A16,16 0,0 1,174 190L174,112A16,16 0,0 1,190 96z"
+        android:fillColor="@color/system_accent1_700"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_minute.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_minute.xml
new file mode 100644
index 0000000000000000000000000000000000000000..72cac6e88597a879384d6d7f6b1e6be57b99e817
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/clock_hand_minute.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="utf-8"?>
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="380dp"
+    android:height="380dp"
+    android:viewportWidth="380"
+    android:viewportHeight="380">
+    <path
+        android:pathData="M190,60L190,60A16,16 0,0 1,206 76L206,190A16,16 0,0 1,190 206L190,206A16,16 0,0 1,174 190L174,76A16,16 0,0 1,190 60z"
+        android:fillColor="@color/system_accent2_500"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/ic_number11.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/ic_number11.xml
new file mode 100644
index 0000000000000000000000000000000000000000..daad61148c80e594ea7ababa0cb81fb506ef43db
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/ic_number11.xml
@@ -0,0 +1,12 @@
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="24dp"
+    android:height="24dp"
+    android:viewportWidth="24"
+    android:viewportHeight="24">
+  <path
+      android:pathData="M5.14,5H1.59a0.88,0.88 0,0 1,-0.88 -0.89V0.88A0.87,0.87 0,0 1,1.59 0H9.36a0.87,0.87 0,0 1,0.88 0.88V23.12a0.88,0.88 0,0 1,-0.88 0.88H6a0.88,0.88 0,0 1,-0.88 -0.88Z"
+      android:fillColor="#000000"/>
+  <path
+      android:pathData="M18.19,5H14.64a0.89,0.89 0,0 1,-0.88 -0.89V0.88A0.88,0.88 0,0 1,14.64 0h7.78a0.87,0.87 0,0 1,0.87 0.88V23.12a0.88,0.88 0,0 1,-0.87 0.88H19.08a0.89,0.89 0,0 1,-0.89 -0.88Z"
+      android:fillColor="#000000"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..da214868ca05789b0e1896eff86659ec2154c3be
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo.xml
@@ -0,0 +1,45 @@
+<!--
+Copyright (C) 2021 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector android:height="128dp"
+    android:width="128dp"
+    android:viewportHeight="24"
+    android:viewportWidth="24"
+    xmlns:android="http://schemas.android.com/apk/res/android">
+    <path
+        android:fillColor="@android:color/system_accent1_400"
+        android:pathData="M11,0.3c0.6,-0.3 1.4,-0.3 2,0l0.6,0.4c0.7,0.4 1.4,0.6 2.2,0.6l0.7,-0.1c0.7,0 1.4,0.3 1.8,0.9l0.3,0.6c0.4,0.7 1,1.2 1.7,1.5L21,4.5c0.7,0.3 1.1,0.9 1.2,1.7v0.7C22.2,7.7 22.5,8.4 23,9l0.4,0.5c0.4,0.6 0.5,1.3 0.2,2l-0.3,0.6c-0.3,0.7 -0.4,1.5 -0.3,2.3l0.1,0.7c0.1,0.7 -0.2,1.4 -0.7,1.9L22,17.5c-0.6,0.5 -1.1,1.1 -1.3,1.9L20.5,20c-0.2,0.7 -0.8,1.2 -1.5,1.4l-0.7,0.1c-0.8,0.2 -1.4,0.5 -2,1.1l-0.5,0.5c-0.5,0.5 -1.3,0.7 -2,0.5l-0.6,-0.2c-0.8,-0.2 -1.5,-0.2 -2.3,0l-0.6,0.2c-0.7,0.2 -1.5,0 -2,-0.5l-0.5,-0.5c-0.5,-0.5 -1.2,-0.9 -2,-1.1L5,21.4c-0.7,-0.2 -1.3,-0.7 -1.5,-1.4l-0.2,-0.7C3.1,18.6 2.6,18 2,17.5l-0.6,-0.4c-0.6,-0.5 -0.8,-1.2 -0.7,-1.9l0.1,-0.7c0.1,-0.8 0,-1.6 -0.3,-2.3l-0.3,-0.6c-0.3,-0.7 -0.2,-1.4 0.2,-2L1,9c0.5,-0.6 0.7,-1.4 0.8,-2.2V6.2C1.9,5.5 2.3,4.8 3,4.5l0.6,-0.3c0.7,-0.3 1.3,-0.9 1.7,-1.5l0.3,-0.6c0.4,-0.6 1.1,-1 1.8,-0.9l0.7,0.1c0.8,0 1.6,-0.2 2.2,-0.6L11,0.3z"
+        />
+    <path
+        android:pathData="M6.3,6.5l3,0l0,12.2"
+        android:strokeWidth="2.22"
+        android:strokeColor="@android:color/system_accent3_800"
+        />
+    <path
+        android:pathData="M12.3,6.5h4l-2,4c2.2,0.3 3.6,2.4 3.3,4.5c-0.3,1.9 -1.9,3.3 -3.8,3.3c-0.5,0 -1,-0.1 -1.4,-0.3"
+        android:strokeWidth="2.22"
+        android:strokeColor="@android:color/system_accent3_800"
+        />
+    <path
+        android:pathData="M6.3,6.5l3,0l0,12.2"
+        android:strokeWidth="0.56"
+        android:strokeColor="@android:color/system_neutral1_100"
+        />
+    <path
+        android:pathData="M12.3,6.5h4l-2,4c2.2,0.3 3.6,2.4 3.3,4.5c-0.3,1.9 -1.9,3.3 -3.8,3.3c-0.5,0 -1,-0.1 -1.4,-0.3"
+        android:strokeWidth="0.56"
+        android:strokeColor="@android:color/system_neutral1_100"
+        />
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo_m.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo_m.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8e43638ef2216975ba90930537daaa3b2c80eeb6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/platlogo_m.xml
@@ -0,0 +1,21 @@
+<!--
+Copyright (C) 2017 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="480dp"
+        android:height="480dp"
+        android:viewportWidth="48.0"
+        android:viewportHeight="48.0">
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/stat_sys_adb.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/stat_sys_adb.xml
new file mode 100644
index 0000000000000000000000000000000000000000..53a6836b4367ac0efe77498062b6ce5f70d862bc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/stat_sys_adb.xml
@@ -0,0 +1,54 @@
+<!--
+Copyright (C) 2023 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:width="24dp"
+    android:height="24dp"
+    android:viewportWidth="24"
+    android:viewportHeight="24">
+    <path
+        android:name="ring"
+        android:pathData="M 12 21 C 16.971 21 21 16.971 21 12 C 21 7.029 16.971 3 12 3 C 7.029 3 3 7.029 3 12 C 3 16.971 7.029 21 12 21 Z"
+        android:fillColor="#00000000"
+        android:strokeColor="#ffffff"
+        android:strokeWidth="2"/>
+    <group android:name="group">
+        <clip-path
+            android:pathData="M 20.5 12 C 20.5 16.694 16.694 20.5 12 20.5 C 7.306 20.5 3.5 16.694 3.5 12 C 3.5 7.306 7.306 3.5 12 3.5 C 16.694 3.5 20.5 7.306 20.5 12 Z"/>
+        <path
+            android:pathData="M 14.812 9.023 C 13.014 9.707 11.027 9.707 9.229 9.023 L 8.265 10.693 C 8.06 11.048 7.605 11.17 7.25 10.964 C 6.895 10.759 6.773 10.305 6.978 9.949 L 7.899 8.355 C 5.988 7.137 4.702 5.084 4.502 2.695 L 4.456 2.153 L 19.584 2.153 L 19.539 2.695 C 19.339 5.084 18.052 7.137 16.142 8.355 L 17.067 9.958 C 17.259 10.307 17.142 10.746 16.801 10.952 C 16.45 11.165 15.993 11.052 15.781 10.701 L 15.775 10.693 L 14.812 9.023 Z"
+            android:fillColor="#ffffff"/>
+        <group android:name="stars">
+            <path android:pathData="
+                M 7,14  h1v1h-1z
+                M 13,15 h1v1h-1z
+                M 14,11 h1v1h-1z
+
+                M 11,17 h0.5v0.5h-0.5z
+                M 10,15 h0.5v0.5h-0.5z
+                M 13,18 h0.5v0.5h-0.5z
+                M 17,15 h0.5v0.5h-0.5z
+                M 15,14 h0.5v0.5h-0.5z
+                M 18,12 h0.5v0.5h-0.5z
+                M 5,13  h0.5v0.5h-0.5z
+                M 5,10  h0.5v0.5h-0.5z
+                M 9,11  h0.5v0.5h-0.5z
+                M 8,17  h0.5v0.5h-0.5z
+                M 12,12 h0.5v0.5h-0.5z
+            " android:fillColor="#ffffff"/>
+        </group>
+    </group>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_connected.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_connected.xml
new file mode 100644
index 0000000000000000000000000000000000000000..22a4a6cb4c6baf91315dcfbafe83e29f302cebf2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_connected.xml
@@ -0,0 +1,24 @@
+<!--
+Copyright (C) 2016 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="48dp"
+        android:height="48dp"
+        android:viewportWidth="48.0"
+        android:viewportHeight="48.0">
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M25.3,20c-1.65,-4.66 -6.08,-8 -11.3,-8 -6.63,0 -12,5.37 -12,12s5.37,12 12,12c5.22,0 9.65,-3.34 11.3,-8H34v8h8v-8h4v-8H25.3zM14,28c-2.21,0 -4,-1.79 -4,-4s1.79,-4 4,-4 4,1.79 4,4 -1.79,4 -4,4z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_disconnected.xml b/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_disconnected.xml
new file mode 100644
index 0000000000000000000000000000000000000000..22a4a6cb4c6baf91315dcfbafe83e29f302cebf2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-nodpi/vpn_disconnected.xml
@@ -0,0 +1,24 @@
+<!--
+Copyright (C) 2016 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="48dp"
+        android:height="48dp"
+        android:viewportWidth="48.0"
+        android:viewportHeight="48.0">
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M25.3,20c-1.65,-4.66 -6.08,-8 -11.3,-8 -6.63,0 -12,5.37 -12,12s5.37,12 12,12c5.22,0 9.65,-3.34 11.3,-8H34v8h8v-8h4v-8H25.3zM14,28c-2.21,0 -4,-1.79 -4,-4s1.79,-4 4,-4 4,1.79 4,4 -1.79,4 -4,4z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/dialog_background_material.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/dialog_background_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..de52f08c00bf47968ba2c784bf1bb16543000f3c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/dialog_background_material.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="rectangle">
+    <solid android:color="?attr/colorBackground" />
+</shape>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/global_action_item_divider.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/global_action_item_divider.xml
new file mode 100644
index 0000000000000000000000000000000000000000..89f3ef415e791c90446a75e068e0a3141a5fd322
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/global_action_item_divider.xml
@@ -0,0 +1,20 @@
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android">
+    <solid android:color="@android:color/transparent" />
+    <size android:height="4dp" />
+</shape>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2cff81d63edac138447711dd1e59af2b37218792
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background.xml
@@ -0,0 +1,20 @@
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<ripple xmlns:android="http://schemas.android.com/apk/res/android"
+        android:color="?attr/colorControlHighlight">
+    <item android:drawable="@drawable/global_actions_item_grey_background_shape"/>
+</ripple>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background_shape.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background_shape.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f2df319c888de957131a03cb9f873f38f83f4db8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_grey_background_shape.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+       android:shape="rectangle">
+    <corners android:radius="26dp"/>
+    <solid android:color="@color/wear_material_grey_900"/>
+</shape>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4be8f2df1cf7968e614a4e25b3a6e2ca8745ab55
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background.xml
@@ -0,0 +1,20 @@
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<ripple xmlns:android="http://schemas.android.com/apk/res/android"
+        android:color="?attr/colorControlHighlight">
+    <item android:drawable="@drawable/global_actions_item_red_background_shape"/>
+</ripple>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background_shape.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background_shape.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4f23700a9014cabacb038904ca56f49682adc4ba
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/global_actions_item_red_background_shape.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+       android:shape="rectangle">
+    <corners android:radius="26dp"/>
+    <solid android:color="@color/wear_material_red_mid"/>
+</shape>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_done.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_done.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a04b944f391fd06f133e480a361bb04234a784c0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_done.xml
@@ -0,0 +1,19 @@
+<!--
+     Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<vector android:height="22dp" android:viewportHeight="22.0"
+    android:viewportWidth="22.0" android:width="22dp" xmlns:android="http://schemas.android.com/apk/res/android">
+    <path android:fillColor="#FFFFFF" android:pathData="M9.25,14.82L5.43,11l-1.3,1.3 5.12,5.12 11,-11 -1.3,-1.3 -9.7,9.7z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_send.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_send.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3689172f72aba237e9578485d2892c9dd9da33f3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_input_extract_action_send.xml
@@ -0,0 +1,24 @@
+<!--
+     Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="22dp"
+        android:height="22dp"
+        android:viewportWidth="22.0"
+        android:viewportHeight="22.0">
+    <path
+        android:pathData="M2.77,19.32L22,11.07 2.78,2.82v6.42l13.74,1.83L2.77,12.9v6.42z"
+        android:fillColor="#FFFFFF"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_bugreport.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_bugreport.xml
new file mode 100644
index 0000000000000000000000000000000000000000..66dd392d685fa77471eb9fec8ff6104a6176781c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_bugreport.xml
@@ -0,0 +1,31 @@
+<!--
+    Copyright (C) 2017 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="24.0dp"
+        android:height="24.0dp"
+        android:viewportWidth="24.0"
+        android:viewportHeight="24.0"
+        android:tint="@android:color/white">
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M20,10V8h-2.81c-0.45,-0.78 -1.07,-1.46 -1.82,-1.96L17,4.41L15.59,3l-2.17,2.17c-0.03,-0.01 -0.05,-0.01 -0.08,-0.01c-0.16,-0.04 -0.32,-0.06 -0.49,-0.09c-0.06,-0.01 -0.11,-0.02 -0.17,-0.03C12.46,5.02 12.23,5 12,5h0c-0.49,0 -0.97,0.07 -1.42,0.18l0.02,-0.01L8.41,3L7,4.41l1.62,1.63l0.01,0C7.88,6.54 7.26,7.22 6.81,8H4v2h2.09C6.03,10.33 6,10.66 6,11v1H4v2h2v1c0,0.34 0.04,0.67 0.09,1H4v2h2.81c1.04,1.79 2.97,3 5.19,3h0c2.22,0 4.15,-1.21 5.19,-3H20v-2h-2.09l0,0c0.05,-0.33 0.09,-0.66 0.09,-1v-1h2v-2h-2v-1c0,-0.34 -0.04,-0.67 -0.09,-1l0,0H20zM16,15c0,2.21 -1.79,4 -4,4c-2.21,0 -4,-1.79 -4,-4v-4c0,-2.21 1.79,-4 4,-4h0c2.21,0 4,1.79 4,4V15z"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M10,14h4v2h-4z"/>
+    <path
+        android:fillColor="#FF000000"
+        android:pathData="M10,10h4v2h-4z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_power_off.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_power_off.xml
new file mode 100644
index 0000000000000000000000000000000000000000..34bc88cad19a616a9dfe7b261c1d68e97c845ad3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_lock_power_off.xml
@@ -0,0 +1,26 @@
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="24dp"
+        android:height="24dp"
+        android:viewportWidth="24"
+        android:viewportHeight="24"
+        android:tint="@android:color/white">
+    <path
+        android:fillColor="@android:color/black"
+        android:pathData="M11,2h2v10h-2zM18.37,5.64l-1.41,1.41c2.73,2.73 2.72,7.16 -0.01,9.89 -2.73,2.73 -7.17,2.73 -9.89,0.01 -2.73,-2.73 -2.74,-7.18 -0.01,-9.91l-1.41,-1.4c-3.51,3.51 -3.51,9.21 0.01,12.73 3.51,3.51 9.21,3.51 12.72,-0.01 3.51,-3.51 3.51,-9.2 0,-12.72z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/ic_restart.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_restart.xml
new file mode 100644
index 0000000000000000000000000000000000000000..24d7c347f673bb96e8313e4d6a94c1a192395400
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/ic_restart.xml
@@ -0,0 +1,26 @@
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<vector xmlns:android="http://schemas.android.com/apk/res/android"
+        android:width="24dp"
+        android:height="24dp"
+        android:viewportWidth="24"
+        android:viewportHeight="24"
+        android:tint="@android:color/white">
+    <path
+        android:fillColor="@android:color/black"
+        android:pathData="M6,13c0,-1.65 0.67,-3.15 1.76,-4.24L6.34,7.34C4.9,8.79 4,10.79 4,13c0,4.08 3.05,7.44 7,7.93v-2.02c-2.83,-0.48 -5,-2.94 -5,-5.91zM20,13c0,-4.42 -3.58,-8 -8,-8 -0.06,0 -0.12,0.01 -0.18,0.01l1.09,-1.09L11.5,2.5 8,6l3.5,3.5 1.41,-1.41 -1.08,-1.08c0.06,0 0.12,-0.01 0.17,-0.01 3.31,0 6,2.69 6,6 0,2.97 -2.17,5.43 -5,5.91v2.02c3.95,-0.49 7,-3.85 7,-7.93z"/>
+</vector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_thumb.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_thumb.xml
new file mode 100644
index 0000000000000000000000000000000000000000..51aced25e619f3c931ccfb1cee29655ef1563888
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_thumb.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+    android:tint="?attr/colorControlNormal"
+    android:shape="rectangle">
+    <solid android:color="#39757575" />
+    <size android:height="10dp" />
+    <corners android:radius="2dp" />
+</shape>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_track.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_track.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5a04b1ca0b2caca86b6400f8de5b0a7778fee635
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/scrollbar_vertical_track.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+    android:tint="?attr/colorControlNormal"
+    android:shape="rectangle">
+    <solid android:color="#39ffffff" />
+    <size android:width="4dp" />
+</shape>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/switch_thumb_watch_default_dark_anim.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/switch_thumb_watch_default_dark_anim.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9e3e89338dabe28c6beef0d207f6d448e5a1b7bc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/switch_thumb_watch_default_dark_anim.xml
@@ -0,0 +1,93 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<animated-selector xmlns:android="http://schemas.android.com/apk/res/android"
+    android:constantSize="true">
+    <item
+        android:id="@+id/off"
+        android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+        android:state_enabled="false" />
+    <item
+        android:id="@+id/on"
+        android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+        android:state_checked="true" />
+    <item
+        android:id="@+id/off"
+        android:drawable="@drawable/watch_switch_thumb_mtrl_14w" />
+    <transition
+        android:fromId="@id/off"
+        android:toId="@id/on">
+        <animation-list>
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+                android:duration="30" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_15w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_16w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_17w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_18w"
+                android:duration="75" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_17w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_16w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_15w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+                android:duration="30" />
+        </animation-list>
+    </transition>
+    <transition
+        android:fromId="@id/on"
+        android:toId="@id/off">
+        <animation-list>
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+                android:duration="30" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_15w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_16w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_17w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_18w"
+                android:duration="75" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_17w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_16w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_15w"
+                android:duration="15" />
+            <item
+                android:drawable="@drawable/watch_switch_thumb_mtrl_14w"
+                android:duration="30" />
+        </animation-list>
+    </transition>
+</animated-selector>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6945256e4b0410925579d3128c9202232f8e597b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon.xml
@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+<adaptive-icon xmlns:android="http://schemas.android.com/apk/res/android">
+    <background android:drawable="@drawable/sym_def_app_icon_background" />
+    <foreground android:drawable="@mipmap/sym_def_app_icon_foreground" />
+</adaptive-icon>
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon_background.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon_background.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6d6352f30fb1f1e739c3f19543b0ebca3d5f2721
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/sym_def_app_icon_background.xml
@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<shape xmlns:android="http://schemas.android.com/apk/res/android">
+    <solid android:color="#2374CE"/>
+</shape>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/drawable-watch/toast_frame.xml b/android-sdk/platforms/android-34/data/res/drawable-watch/toast_frame.xml
new file mode 100644
index 0000000000000000000000000000000000000000..60129a2086fd0a7939fd28b0b54f40ab5714dcf7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/drawable-watch/toast_frame.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2018, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<shape xmlns:android="http://schemas.android.com/apk/res/android"
+       android:shape="rectangle">
+    <!-- background is material_grey_700 with .9 alpha -->
+    <solid android:color="#E65F6368" />
+    <corners android:radius="24dp" />
+</shape>
+
diff --git a/android-sdk/platforms/android-34/data/res/interpolator-watch/progress_indeterminate_rotation_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator-watch/progress_indeterminate_rotation_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ed2655cb0ac8cd68002c3e45056c45a4b9fec3af
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator-watch/progress_indeterminate_rotation_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.032,0.0 0.016,0.2 0.08,0.2 l 0.12,0.0 c 0.032,0.0 0.016,0.2 0.08,0.2 l 0.12,0.0 c 0.032,0.0 0.016,0.2 0.08,0.2 l 0.12,0.0 c 0.032,0.0 0.016,0.2 0.08,0.2 l 0.12,0.0 c 0.032,0.0 0.016,0.2 0.08,0.2 l 0.12,0.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_end_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_end_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f46d5e0e7c8211526b44c16efa6ef5fc70eaeed8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_end_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.08,0.0 0.04,1.0 0.2,1.0 l 0.8,0.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_offset_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_offset_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d58672e9cb42e6fd81fe7f5cd6a8d819df313b8b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_offset_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.4,1.0 l 0.6,0.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_start_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_start_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..365609c97d758916d75c22087c26ef241ee910b9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator-watch/trim_start_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.2,0.0 c 0.08,0.0 0.04,1.0 0.2,1.0 l 0.6,0.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/accelerate_cubic.xml b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_cubic.xml
new file mode 100644
index 0000000000000000000000000000000000000000..90f62dae3044011f3939e47c7880a2eb13d85e2c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_cubic.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<accelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="1.5" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/accelerate_decelerate.xml b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_decelerate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e7f9d9fa669bdc73b59a4f18c3730e365579149a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_decelerate.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<accelerateDecelerateInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quad.xml b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quad.xml
new file mode 100644
index 0000000000000000000000000000000000000000..18207f2934c0cb795606f04bb89fcb856fee261e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quad.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<accelerateInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quart.xml b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quart.xml
new file mode 100644
index 0000000000000000000000000000000000000000..64efec6fd19a0c1be800d6ac19f216f4c0d321fc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quart.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<accelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="2.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quint.xml b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quint.xml
new file mode 100644
index 0000000000000000000000000000000000000000..cd3595cc2d51f4d86c187d24c174fcf46977ba7f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/accelerate_quint.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<accelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="2.5" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/activity_close_dim.xml b/android-sdk/platforms/android-34/data/res/interpolator/activity_close_dim.xml
new file mode 100644
index 0000000000000000000000000000000000000000..faad1399ff490e6cfce0991741a17e0d92ee4cdf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/activity_close_dim.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2018 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.33"
+    android:controlY1="0"
+    android:controlX2="1"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/aggressive_ease.xml b/android-sdk/platforms/android-34/data/res/interpolator/aggressive_ease.xml
new file mode 100644
index 0000000000000000000000000000000000000000..620424fb41126d9c29177f73fc30b16e87db5989
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/aggressive_ease.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2017 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.2"
+    android:controlY1="0"
+    android:controlX2="0"
+    android:controlY2="1"/>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/anticipate.xml b/android-sdk/platforms/android-34/data/res/interpolator/anticipate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7a16b5f4ab1f341098643aff2e812ff40745d233
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/anticipate.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<anticipateInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/anticipate_overshoot.xml b/android-sdk/platforms/android-34/data/res/interpolator/anticipate_overshoot.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d61ddd102cfacdc3afd5856852807908b41b05a0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/anticipate_overshoot.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<anticipateOvershootInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/bounce.xml b/android-sdk/platforms/android-34/data/res/interpolator/bounce.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d89ba491b6b5689cc9510c2751b648aa2ff14c5d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/bounce.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<bounceInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_0.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_0.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ceac6636c3b29eebc0e68b9b37637dbf57c02654
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_0.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 1.0,0.0 l 0.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_1.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..26bc8ad609df1704a62c4eaacc2cf23c4ff29a05
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_checked_mtrl_animation_interpolator_1.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.33333333,0.0 0.0,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_0.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_0.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ceac6636c3b29eebc0e68b9b37637dbf57c02654
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_0.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 1.0,0.0 l 0.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_1.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..26bc8ad609df1704a62c4eaacc2cf23c4ff29a05
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_checkbox_unchecked_mtrl_animation_interpolator_1.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.33333333,0.0 0.0,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_off_mtrl_animation_interpolator_0.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_off_mtrl_animation_interpolator_0.xml
new file mode 100644
index 0000000000000000000000000000000000000000..97c9373429cdd84af0246de3da4f074dc486b3aa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_off_mtrl_animation_interpolator_0.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.4,0.0 0.4,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_on_mtrl_animation_interpolator_0.xml b/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_on_mtrl_animation_interpolator_0.xml
new file mode 100644
index 0000000000000000000000000000000000000000..97c9373429cdd84af0246de3da4f074dc486b3aa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/btn_radio_to_on_mtrl_animation_interpolator_0.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.4,0.0 0.4,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/cycle.xml b/android-sdk/platforms/android-34/data/res/interpolator/cycle.xml
new file mode 100644
index 0000000000000000000000000000000000000000..70ebcb1b6db7df3a46babaea45b2236e93ad257b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/cycle.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<cycleInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/decelerate_cubic.xml b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_cubic.xml
new file mode 100644
index 0000000000000000000000000000000000000000..550a5914b169849569ede662c47bdf07e67d5c56
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_cubic.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<decelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="1.5" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quad.xml b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quad.xml
new file mode 100644
index 0000000000000000000000000000000000000000..48e2308c4d296b53193dcf00dd140c855578166d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quad.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<decelerateInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quart.xml b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quart.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9f6a51fd9da8b580cedf214eaefff85e7bfe9ac5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quart.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<decelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="2.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quint.xml b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quint.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7545b177ae0e8e7343d7da182a574604f38e86b3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/decelerate_quint.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<decelerateInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+        android:factor="2.5" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/emphasized.xml b/android-sdk/platforms/android-34/data/res/interpolator/emphasized.xml
new file mode 100644
index 0000000000000000000000000000000000000000..aae939a4b35745c3de05584e00404e249ff79841
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/emphasized.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData=
+        "M 0,0 C 0.05, 0, 0.133333, 0.06, 0.166666, 0.4 C 0.208333, 0.82, 0.25, 1, 1, 1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/emphasized_accelerate.xml b/android-sdk/platforms/android-34/data/res/interpolator/emphasized_accelerate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f39faf8c1c98f5d98aa419702644722fc8f3ccf1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/emphasized_accelerate.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.3"
+    android:controlY1="0"
+    android:controlX2="0.8"
+    android:controlY2="0.15"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/emphasized_decelerate.xml b/android-sdk/platforms/android-34/data/res/interpolator/emphasized_decelerate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3e4fab6f7dee988aef39c112141001d96e24ceb5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/emphasized_decelerate.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.05"
+    android:controlY1="0.7"
+    android:controlX2="0.1"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/fast_out_extra_slow_in.xml b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_extra_slow_in.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f16057417a632b2c920b8b14333ef25cf5a5391e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_extra_slow_in.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2017 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0,0 C 0.05, 0, 0.133333, 0.06, 0.166666, 0.4 C 0.208333, 0.82, 0.25, 1, 1, 1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/fast_out_linear_in.xml b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_linear_in.xml
new file mode 100644
index 0000000000000000000000000000000000000000..19f95a6907519197d34b8e1f5768eb85e09e22d4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_linear_in.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.4"
+    android:controlY1="0"
+    android:controlX2="1"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/fast_out_slow_in.xml b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_slow_in.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2d68dbb80a103596b473852c794cd6be11a8fee3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/fast_out_slow_in.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.4"
+    android:controlY1="0"
+    android:controlX2="0.2"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_0.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_0.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c6db901fdd222b46a45a6506daacab1d7876cbd2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_0.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.668316831683,0.0 c 0.00003,0.0 0.0663366336634,1.0 0.331683168317,1.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_1.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..584385da8c20076f0534905fde20e5585b50836d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_1.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.0001,0.0 0.0,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_2.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..334dee7a2b6cab5bf820146867bf3eabfe7ff360
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_2.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.161290322581,0.0 0.0806451612903,0.909090909091 0.403225806452,0.909090909091 c 0.238709677419,0.0 0.11935483871,0.0909090909091 0.596774193548,0.0909090909091 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_3.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_3.xml
new file mode 100644
index 0000000000000000000000000000000000000000..67891fc15281c0472b3599d745863d19b52096fd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_3.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.5,0.0 c 0.2,0.0 0.1,1.0 0.5,1.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_4.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_4.xml
new file mode 100644
index 0000000000000000000000000000000000000000..756a9e1f1c64731945bd4463a48d9ca94314b1b5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_4.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.5,0.0 c 0.00005,0.0 0.1,1.0 0.5,1.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_5.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_5.xml
new file mode 100644
index 0000000000000000000000000000000000000000..584385da8c20076f0534905fde20e5585b50836d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_5.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c 0.0001,0.0 0.0,1.0 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_6.xml b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_6.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bed54d419dbb1275872940aada09bd33027493f2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/ft_avd_toarrow_animation_interpolator_6.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<pathInterpolator
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 l 0.582706766917,0.0 c 0.166917293233,0.0 0.0834586466165,1.0 0.417293233083,1.0 L 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_1.xml b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7e295d8a65ed70839333fc4a770a2913aae855b4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_1.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0,0 c 0.541795,0 0.2,1 1,1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_2.xml b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1601fd026482ebd65e11646dc8f6ca42d3d6b204
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_source_scale_2.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0,0 c 0.220434,0 0.833333,1 1,1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_target_ydelta.xml b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_target_ydelta.xml
new file mode 100644
index 0000000000000000000000000000000000000000..96b539f24d2cfae3b1ee0fa30de92017d3b690a5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_behind_target_ydelta.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0,0 c 0.3,0 0,1 1,1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_alpha.xml b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_alpha.xml
new file mode 100644
index 0000000000000000000000000000000000000000..41b79b5df177a229513d0199bc0f3b6d3bf33260
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_alpha.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+                  android:controlX1="0"
+                  android:controlY1="0"
+                  android:controlX2="0.7"
+                  android:controlY2="1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_ydelta.xml b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_ydelta.xml
new file mode 100644
index 0000000000000000000000000000000000000000..acac761ae3a2a343dcb7b397702119cfb4de32df
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/launch_task_micro_ydelta.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+                  android:controlX1="0"
+                  android:controlY1="0"
+                  android:controlX2="0.4"
+                  android:controlY2="1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/linear.xml b/android-sdk/platforms/android-34/data/res/interpolator/linear.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f4d256a61a180a8807b189e91675370f7269c8d1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/linear.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/anim/linear_interpolator.xml
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<linearInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/linear_out_slow_in.xml b/android-sdk/platforms/android-34/data/res/interpolator/linear_out_slow_in.xml
new file mode 100644
index 0000000000000000000000000000000000000000..83fc2230fd22b74056ba220bd55b142616a82d6d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/linear_out_slow_in.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0"
+    android:controlY1="0"
+    android:controlX2="0.2"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/overshoot.xml b/android-sdk/platforms/android-34/data/res/interpolator/overshoot.xml
new file mode 100644
index 0000000000000000000000000000000000000000..725ea4899faf3b9adc74af1194dcd885f64bc062
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/overshoot.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<overshootInterpolator />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_scalex.xml b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_scalex.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4349d7dee0ab8e8d3d3c66340cef8bd5e39491f1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_scalex.xml
@@ -0,0 +1,17 @@
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0 0 L 0.3665 0 C 0.47252618112021,0.062409910275 0.61541608570164,0.5 0.68325,0.5 C 0.75475061236836,0.5 0.75725829093844,0.814510098964 1.0,1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_translatex.xml b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_translatex.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c33f70965fd3eda38d2e9e9bf630c9dda0176f2f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect1_translatex.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 L 0.2 0 C 0.3958333333336,0.0 0.474845090492,0.206797621729 0.5916666666664,0.417082932942 C 0.7151610251224,0.639379624869 0.81625,0.974556908664 1.0,1.0 " />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_scalex.xml b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_scalex.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c36411db96084d0c813d7385c0788cad76ed6f8e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_scalex.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0,0 C 0.06834272400867,0.01992566661414 0.19220331656133,0.15855429260523 0.33333333333333,0.34926160892842 C 0.38410433133433,0.41477913453861 0.54945792615267,0.68136029463551 0.66666666666667,0.68279962777002 C 0.752586273196,0.68179620963216 0.737253971954,0.878896194318 1,1" />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_translatex.xml b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_translatex.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6c0420421ac2643f39e35c52cea06ab4dd5656fc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/progress_indeterminate_horizontal_rect2_translatex.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 C 0.0375,0.0 0.128764607715,0.0895380946618 0.25,0.218553507947 C 0.322410320025,0.295610602487 0.436666666667,0.417591408114 0.483333333333,0.489826169306 C 0.69,0.80972296795 0.793333333333,0.950016125212 1.0,1.0 " />
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation.xml b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bf61229e5f507e77f624023db3447a757c88200d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.2"
+    android:controlY1="0"
+    android:controlX2="0"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_in.xml b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_in.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9c566a7c8f2374d0d11cb58a8c792e2f0fdfa5a8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_in.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.15"
+    android:controlY1="0.45"
+    android:controlX2="0.33"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_out.xml b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_out.xml
new file mode 100644
index 0000000000000000000000000000000000000000..73a37d4f1aa577aec08c96243515b166a61af6a3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/screen_rotation_alpha_out.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.57"
+    android:controlY1="0"
+    android:controlX2="0.71"
+    android:controlY2=".43"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/standard.xml b/android-sdk/platforms/android-34/data/res/interpolator/standard.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bf61229e5f507e77f624023db3447a757c88200d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/standard.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.2"
+    android:controlY1="0"
+    android:controlX2="0"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/standard_accelerate.xml b/android-sdk/platforms/android-34/data/res/interpolator/standard_accelerate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..68e2fa1248931a1ff7375245b8671816a0353df4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/standard_accelerate.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0.3"
+    android:controlY1="0"
+    android:controlX2="1"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/standard_decelerate.xml b/android-sdk/platforms/android-34/data/res/interpolator/standard_decelerate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..016987140cded4157a0ee7c5ec8cbef5d3b150f1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/standard_decelerate.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:controlX1="0"
+    android:controlY1="0"
+    android:controlX2="0"
+    android:controlY2="1"/>
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/transient_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator/transient_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..653a8cfdcdc08215aa75335d4263a44e9f7d7af4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/transient_interpolator.xml
@@ -0,0 +1,17 @@
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="M 0.0,0.0 c0.167,0.167 0.833,0.833 1.0,1.0"/>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/trim_end_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator/trim_end_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bfaa8e2b90ce309ccf155aab023063e7ed9c7adc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/trim_end_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="C0.2,0 0.1,1 0.5, 1 L 1,1" />
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/interpolator/trim_start_interpolator.xml b/android-sdk/platforms/android-34/data/res/interpolator/trim_start_interpolator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..14ea90d32ed557dc039b4916d3596de37b6c4f36
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/interpolator/trim_start_interpolator.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<pathInterpolator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:pathData="L0.5,0 C 0.7,0 0.6,1 1, 1" />
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3c7a5c578fc5099fc182c1c7a1c4c173a5235ff0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog.xml
@@ -0,0 +1,85 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<com.android.internal.widget.AlertDialogLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="start|top"
+    android:orientation="vertical">
+
+    <include layout="@layout/car_alert_dialog_title" />
+
+    <FrameLayout
+        android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <ScrollView
+            android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clipToPadding="false">
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="vertical">
+
+                <Space
+                    android:id="@+id/textSpacerNoTitle"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/dialog_no_title_padding_top" />
+
+                <TextView
+                    android:id="@+id/message"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:layout_marginStart="@dimen/text_view_start_margin"
+                    android:layout_marginEnd="@dimen/text_view_end_margin"
+                    style="@style/CarDialogMessageText"/>
+
+                <!-- we don't need this spacer, but the id needs to be here for compatibility -->
+                <Space
+                    android:id="@+id/textSpacerNoButtons"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="0dp" />
+            </LinearLayout>
+        </ScrollView>
+    </FrameLayout>
+
+    <FrameLayout
+        android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <FrameLayout
+            android:id="@+id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    </FrameLayout>
+
+    <include
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        layout="@layout/car_alert_dialog_button_bar" />
+</com.android.internal.widget.AlertDialogLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_button_bar.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_button_bar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..43fd1eb4c25f04f8cdd4f71840f02569d821227a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_button_bar.xml
@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/buttonPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:scrollbarAlwaysDrawVerticalTrack="true"
+    android:scrollIndicators="top|bottom"
+    android:fillViewport="true"
+    style="?attr/buttonBarStyle">
+    <com.android.internal.widget.ButtonBarLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingStart="@dimen/button_bar_layout_start_padding"
+        android:paddingEnd="@dimen/button_bar_layout_end_padding"
+        android:paddingTop="@dimen/button_bar_layout_top_padding"
+        android:layoutDirection="locale"
+        android:orientation="horizontal"
+        android:gravity="left|center_vertical">
+
+        <Button
+            android:id="@+id/button3"
+            style="@style/CarDialogButtonText"
+            android:minWidth="@dimen/car_touch_target_size"
+            android:paddingStart="@dimen/car_padding_2"
+            android:paddingEnd="@dimen/car_padding_2"
+            android:background="@drawable/car_dialog_button_background"
+            android:layout_marginRight="@dimen/button_end_margin"
+            android:layout_width="wrap_content"
+            android:layout_height="@dimen/button_layout_height" />
+
+        <Button
+            android:id="@+id/button2"
+            style="@style/CarDialogButtonText"
+            android:minWidth="@dimen/car_touch_target_size"
+            android:paddingStart="@dimen/car_padding_2"
+            android:paddingEnd="@dimen/car_padding_2"
+            android:background="@drawable/car_dialog_button_background"
+            android:layout_marginRight="@dimen/button_end_margin"
+            android:layout_width="wrap_content"
+            android:layout_height="@dimen/button_layout_height" />
+
+        <Button
+            android:id="@+id/button1"
+            style="@style/CarDialogButtonText"
+            android:minWidth="@dimen/car_touch_target_size"
+            android:paddingStart="@dimen/car_padding_2"
+            android:paddingEnd="@dimen/car_padding_2"
+            android:background="@drawable/car_dialog_button_background"
+            android:layout_width="wrap_content"
+            android:layout_height="@dimen/button_layout_height" />
+        <Space
+            android:id="@+id/spacer"
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:visibility="invisible" />
+    </com.android.internal.widget.ButtonBarLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_title.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ba735a649dc2ea050f2223d481228826ff009ba5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_alert_dialog_title.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:id="@+id/topPanel"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:gravity="center_vertical"
+              android:orientation="vertical">
+
+    <!-- If the client uses a customTitle, it will be added here. -->
+
+    <RelativeLayout
+        android:id="@+id/title_template"
+        android:layout_width="match_parent"
+        android:layout_height="@dimen/car_card_header_height"
+        android:orientation="horizontal">
+
+        <ImageView
+            android:id="@+id/icon"
+            android:layout_width="@dimen/image_size"
+            android:layout_height="@dimen/image_size"
+            android:layout_marginStart="@dimen/image_margin_start"
+            android:layout_alignParentStart="true"
+            android:layout_centerVertical="true"
+            android:scaleType="fitCenter"
+            android:src="@null" />
+
+        <com.android.internal.widget.DialogTitle
+            android:id="@+id/alertTitle"
+            android:maxLines="1"
+            android:ellipsize="none"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_toEndOf="@+id/icon"
+            android:textAlignment="viewStart"
+            android:layout_centerVertical="true"
+            android:layout_marginStart="@dimen/text_view_start_margin"
+            android:layout_marginEnd="@dimen/text_view_end_margin"
+            style="?attr/windowTitleStyle" />
+    </RelativeLayout>
+
+    <Space
+        android:id="@+id/titleDividerNoCustom"
+        android:visibility="gone"
+        android:layout_width="match_parent"
+        android:layout_height="0dp" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_preference.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_preference.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2f9b46552561a29e8930e49422e7c6dfb964eee9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_preference.xml
@@ -0,0 +1,71 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright 2019 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:background="?android:attr/selectableItemBackground"
+    android:clipToPadding="false"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart">
+
+    <com.android.internal.widget.PreferenceImageView
+        android:id="@id/icon"
+        android:layout_width="@dimen/car_preference_icon_size"
+        android:layout_height="@dimen/car_preference_icon_size"
+        android:layout_alignParentStart="true"
+        android:layout_centerVertical="true"
+        android:layout_marginBottom="@dimen/car_preference_row_vertical_margin"
+        android:layout_marginEnd="?android:attr/listPreferredItemPaddingEnd"
+        android:layout_marginTop="@dimen/car_preference_row_vertical_margin"/>
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_centerVertical="true"
+        android:layout_marginBottom="@dimen/car_preference_row_vertical_margin"
+        android:layout_marginTop="@dimen/car_preference_row_vertical_margin"
+        android:layout_toEndOf="@id/icon"
+        android:layout_toStartOf="@id/widget_frame"
+        android:orientation="vertical">
+
+        <TextView
+            android:id="@id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceListItem"/>
+
+        <TextView
+            android:id="@id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"/>
+
+    </LinearLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <FrameLayout
+        android:id="@id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentEnd="true"
+        android:layout_centerVertical="true"/>
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_preference_category.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_preference_category.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3def511ea013033a357f73eba8ca4cbab9d55b9a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_preference_category.xml
@@ -0,0 +1,64 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright 2019 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:background="?android:attr/selectableItemBackground"
+    android:focusable="true"
+    android:gravity="center_vertical"
+    android:minHeight="@dimen/car_card_header_height"
+    android:orientation="horizontal"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart">
+
+    <com.android.internal.widget.PreferenceImageView
+        android:id="@id/icon"
+        android:layout_width="@dimen/car_preference_category_icon_size"
+        android:layout_height="@dimen/car_preference_category_icon_size"
+        android:layout_gravity="center_vertical"
+        android:layout_marginBottom="@dimen/car_preference_row_vertical_margin"
+        android:layout_marginEnd="?android:attr/listPreferredItemPaddingEnd"
+        android:layout_marginTop="@dimen/car_preference_row_vertical_margin"/>
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginBottom="@dimen/car_preference_row_vertical_margin"
+        android:layout_marginTop="@dimen/car_preference_row_vertical_margin"
+        android:orientation="vertical">
+
+        <TextView
+            android:id="@id/title"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:fontFamily="sans-serif-medium"
+            android:textAlignment="viewStart"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/colorAccent"/>
+
+        <TextView
+            android:id="@id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textColor="?android:attr/textColorSecondary"/>
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..755cbfe1b41933b6a7da8c1a2410d1badb7fb83d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list.xml
@@ -0,0 +1,164 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2019, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:id="@id/contentPanel">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:weightSum="5"
+        android:layout_alwaysShow="true"
+        android:orientation="vertical"
+        android:background="?attr/colorBackgroundFloating"
+        android:elevation="8dp">
+
+        <LinearLayout
+            android:id="@+id/button_bar"
+            android:visibility="gone"
+            style="?attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_ignoreOffset="true"
+            android:layout_alwaysShow="true"
+            android:layout_hasNestedScrollIndicator="true"
+            android:background="?attr/colorBackgroundFloating"
+            android:orientation="horizontal"
+            android:paddingTop="8dp"
+            android:paddingStart="12dp"
+            android:weightSum="4"
+            android:paddingEnd="12dp"
+            android:elevation="8dp">
+
+            <TextView
+                android:id="@+id/profile_button"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_marginEnd="8dp"
+                android:paddingStart="8dp"
+                android:paddingEnd="8dp"
+                android:textSize="40sp"
+                android:layout_weight="4"
+                android:layout_gravity="left"
+                android:visibility="gone"
+                android:textColor="?attr/colorAccent"
+                android:singleLine="true"/>
+
+            <TextView
+                android:id="@+id/title"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="left"
+                android:layout_weight="3"
+                android:paddingTop="8dp"
+                android:layout_below="@id/profile_button"
+                android:textAppearance="?android:attr/textAppearanceLarge"
+                android:paddingBottom="8dp"/>
+
+            <Button
+                android:id="@+id/button_once"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:layout_gravity="right"
+                style="?attr/buttonBarButtonStyle"
+                android:text="@string/activity_resolver_use_once"
+                android:layout_weight="0.5"
+                android:onClick="onButtonClick"/>
+
+            <Button
+                android:id="@+id/button_always"
+                android:layout_marginLeft="2dp"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:layout_gravity="right"
+                style="?attr/buttonBarButtonStyle"
+                android:text="@string/activity_resolver_use_always"
+                android:layout_weight="0.5"
+                android:onClick="onButtonClick"/>
+        </LinearLayout>
+
+        <FrameLayout
+            android:id="@+id/stub"
+            android:visibility="gone"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:background="?attr/colorBackgroundFloating"/>
+
+        <TabHost
+            android:id="@+id/profile_tabhost"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_alignParentTop="true"
+            android:layout_centerHorizontal="true"
+            android:background="?attr/colorBackgroundFloating">
+            <LinearLayout
+                android:orientation="vertical"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+                <TabWidget
+                    android:id="@android:id/tabs"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:visibility="gone">
+                </TabWidget>
+                <View
+                    android:id="@+id/resolver_tab_divider"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="1dp"
+                    android:background="?attr/colorBackgroundFloating"
+                    android:foreground="?attr/dividerVertical"
+                    android:layout_marginBottom="8dp"/>
+                <FrameLayout
+                    android:id="@android:id/tabcontent"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content">
+                    <com.android.internal.app.ResolverViewPager
+                        android:id="@+id/profile_pager"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"/>
+                </FrameLayout>
+            </LinearLayout>
+        </TabHost>
+
+        <View
+            android:layout_alwaysShow="true"
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="?attr/colorBackgroundFloating"
+            android:foreground="?attr/dividerVertical"/>
+
+        <TextView android:id="@+id/empty"
+                  android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  android:background="?attr/colorBackgroundFloating"
+                  android:elevation="8dp"
+                  android:layout_alwaysShow="true"
+                  android:text="@string/noApplications"
+                  android:padding="32dp"
+                  android:gravity="center"
+                  android:visibility="gone"/>
+
+    </LinearLayout>
+
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list_with_default.xml b/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list_with_default.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5e450b221959d6d58b92bdd630b717b2b61cdc72
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-car/car_resolver_list_with_default.xml
@@ -0,0 +1,196 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2019, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:maxCollapsedHeight="200dp"
+    android:id="@id/contentPanel">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:weightSum="5"
+        android:layout_alwaysShow="true"
+        android:orientation="vertical"
+        android:background="?attr/colorBackgroundFloating"
+        android:elevation="8dp">
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="0.5"
+            android:orientation="horizontal">
+
+            <ImageView
+                android:id="@+id/icon"
+                android:layout_width="60dp"
+                android:layout_height="60dp"
+                android:layout_gravity="start|top"
+                android:layout_marginStart="10dp"
+                android:layout_marginEnd="5dp"
+                android:layout_marginTop="10dp"
+                android:src="@drawable/resolver_icon_placeholder"
+                android:scaleType="fitCenter"/>
+
+            <TextView
+                android:id="@+id/title"
+                android:layout_width="0dp"
+                android:layout_weight="1"
+                android:layout_height="?attr/listPreferredItemHeight"
+                android:layout_marginStart="16dp"
+                android:textAppearance="?android:attr/textAppearanceLarge"
+                android:gravity="start|center_vertical"
+                android:paddingEnd="16dp"/>
+
+            <LinearLayout
+                android:id="@+id/profile_button"
+                android:layout_width="wrap_content"
+                android:layout_height="48dp"
+                android:layout_marginTop="4dp"
+                android:layout_marginEnd="4dp"
+                android:paddingStart="8dp"
+                android:paddingEnd="8dp"
+                android:paddingTop="4dp"
+                android:paddingBottom="4dp"
+                android:focusable="true"
+                android:visibility="gone"
+                style="?attr/borderlessButtonStyle">
+
+                <ImageView
+                    android:id="@+id/icon"
+                    android:layout_width="24dp"
+                    android:layout_height="24dp"
+                    android:layout_gravity="start|center_vertical"
+                    android:layout_marginEnd="?attr/listPreferredItemPaddingEnd"
+                    android:layout_marginTop="12dp"
+                    android:layout_marginBottom="12dp"
+                    android:scaleType="fitCenter"/>
+
+                <TextView
+                    android:id="@id/text1"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_gravity="start|center_vertical"
+                    android:layout_marginEnd="?attr/listPreferredItemPaddingEnd"
+                    android:textAppearance="?attr/textAppearanceButton"
+                    android:textColor="?attr/textColorPrimary"
+                    android:minLines="1"
+                    android:maxLines="1"
+                    android:ellipsize="marquee"/>
+            </LinearLayout>
+        </LinearLayout>
+
+        <LinearLayout
+            android:id="@+id/button_bar"
+            android:visibility="gone"
+            style="?attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_alwaysShow="true"
+            android:gravity="end|center_vertical"
+            android:layout_weight="0.5"
+            android:orientation="horizontal"
+            android:layoutDirection="locale"
+            android:measureWithLargestChild="true"
+            android:paddingTop="8dp"
+            android:paddingBottom="8dp"
+            android:paddingStart="12dp"
+            android:paddingEnd="12dp"
+            android:elevation="8dp">
+
+            <Button
+                android:id="@+id/button_once"
+                android:layout_width="wrap_content"
+                android:layout_gravity="start"
+                android:maxLines="2"
+                style="?attr/buttonBarButtonStyle"
+                android:minHeight="@dimen/alert_dialog_button_bar_height"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:text="@string/activity_resolver_use_once"
+                android:onClick="onButtonClick"/>
+
+            <Button
+                android:id="@+id/button_always"
+                android:layout_width="wrap_content"
+                android:layout_gravity="end"
+                android:maxLines="2"
+                android:minHeight="@dimen/alert_dialog_button_bar_height"
+                style="?attr/buttonBarButtonStyle"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:text="@string/activity_resolver_use_always"
+                android:onClick="onButtonClick"/>
+        </LinearLayout>
+
+        <FrameLayout
+            android:id="@+id/stub"
+            android:layout_alwaysShow="true"
+            android:visibility="gone"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:background="?attr/colorBackgroundFloating"/>
+
+        <TabHost
+            android:layout_alwaysShow="true"
+            android:id="@+id/profile_tabhost"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_alignParentTop="true"
+            android:layout_centerHorizontal="true"
+            android:background="?attr/colorBackgroundFloating">
+            <LinearLayout
+                android:orientation="vertical"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+                <TabWidget
+                    android:id="@android:id/tabs"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:visibility="gone">
+                </TabWidget>
+                <View
+                    android:id="@+id/resolver_tab_divider"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="1dp"
+                    android:background="?attr/colorBackgroundFloating"
+                    android:foreground="?attr/dividerVertical"
+                    android:layout_marginBottom="8dp"/>
+                <FrameLayout
+                    android:id="@android:id/tabcontent"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content">
+                    <com.android.internal.app.ResolverViewPager
+                        android:id="@+id/profile_pager"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content">
+                    </com.android.internal.app.ResolverViewPager>
+                </FrameLayout>
+            </LinearLayout>
+        </TabHost>
+
+        <View
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="?attr/dividerVertical"/>
+    </LinearLayout>
+
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-land/date_picker_material.xml b/android-sdk/platforms/android-34/data/res/layout-land/date_picker_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1e711c57fa048f8bffc407904d5d8943bf7b26dd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-land/date_picker_material.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="match_parent"
+              android:orientation="horizontal">
+
+    <include
+        layout="@layout/date_picker_header_material"
+        android:layout_width="168dp"
+        android:layout_height="match_parent" />
+
+    <LinearLayout
+        android:layout_width="0dp"
+        android:layout_height="match_parent"
+        android:layout_weight="1"
+        android:orientation="vertical">
+
+        <include
+            layout="@layout/date_picker_view_animator_material"
+            android:layout_width="match_parent"
+            android:layout_height="0dp"
+            android:layout_weight="1" />
+
+        <ViewStub
+            android:id="@id/buttonPanel"
+            android:layout="@layout/alert_dialog_button_bar_material"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/day_picker_button_margin_top" />
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-land/icon_menu_layout.xml b/android-sdk/platforms/android-34/data/res/layout-land/icon_menu_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..70e3e833188e23b97e454a6f4a2126281514cc11
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-land/icon_menu_layout.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.IconMenuView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/icon_menu" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:rowHeight="66dip"
+    android:maxItems="6"
+    android:maxRows="2"
+    android:maxItemsPerRow="6" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-land/ssl_certificate.xml b/android-sdk/platforms/android-34/data/res/layout-land/ssl_certificate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c6c8dd4e16a8b575ada3761cff132c131c340462
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-land/ssl_certificate.xml
@@ -0,0 +1,280 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ScrollView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content" >
+
+    <LinearLayout
+        android:id="@+id/body"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:gravity="start"
+        android:orientation="vertical" >
+
+        <!-- Placeholder for the success message or one or more warnings -->
+        <LinearLayout
+            android:id="@+id/placeholder"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginTop="12dip"
+            android:orientation="vertical" />
+
+        <!-- Dialog-title line separator -->
+        <ImageView
+            android:id="@+id/title_separator"
+            android:src="@android:drawable/divider_horizontal_dark"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:scaleType="fitXY"
+            android:layout_weight="1"
+            android:gravity="fill_horizontal"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"/>
+
+        <TableLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:shrinkColumns="1"
+            android:orientation="vertical">
+
+            <!-- Issued to: -->
+            <TextView
+                android:id="@+id/issued_to_header"
+                android:text="@string/issued_to"
+                android:textStyle="bold"
+                android:layout_height="wrap_content"
+                android:layout_width="match_parent"
+                android:layout_marginTop="12dip"
+                android:layout_marginStart="20dip"
+                android:layout_marginEnd="20dip"
+                android:layout_marginBottom="7dip" />
+
+            <!-- Common name: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/to_common_header"
+                    android:text="@string/common_name"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/to_common"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Organization: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/to_org_header"
+                    android:text="@string/org_name"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/to_org"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Organizational unit: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/to_org_unit_header"
+                    android:text="@string/org_unit"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/to_org_unit"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Serial number: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/serial_number_header"
+                    android:text="@string/serial_number"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/serial_number"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Issued by: -->
+            <TextView
+                android:id="@+id/issued_to_header"
+                android:text="@string/issued_by"
+                android:textStyle="bold"
+                android:layout_height="wrap_content"
+                android:layout_width="match_parent"
+                android:layout_marginTop="12dip"
+                android:layout_marginStart="20dip"
+                android:layout_marginEnd="20dip"
+                android:layout_marginBottom="7dip" />
+
+            <!-- Common name: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/by_common_header"
+                    android:text="@string/common_name"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/by_common"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Organization: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/by_org_header"
+                    android:text="@string/org_name"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/by_org"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Organizational unit: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/by_org_unit_header"
+                    android:text="@string/org_unit"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/by_org_unit"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Validity Dates: -->
+            <TextView
+                android:id="@+id/validity_header"
+                android:layout_height="wrap_content"
+                android:layout_width="match_parent"
+                android:text="@string/validity_period"
+                android:textStyle="bold"
+                android:layout_marginTop="12dip"
+                android:layout_marginStart="20dip"
+                android:layout_marginEnd="20dip"
+                android:layout_marginBottom="7dip" />
+
+            <!-- Issued On: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/issued_on_header"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:text="@string/issued_on"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/issued_on"
+                    android:layout_height="wrap_content"
+                    android:layout_width="match_parent"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+
+            </TableRow>
+
+            <!-- Expires On: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/expires_on_header"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:text="@string/expires_on"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/expires_on"
+                    android:layout_height="wrap_content"
+                    android:layout_width="match_parent"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+            </TableRow>
+
+            <!-- Fingerprints: -->
+            <TextView
+                android:id="@+id/fingerprints"
+                android:layout_height="wrap_content"
+                android:layout_width="match_parent"
+                android:text="@string/fingerprints"
+                android:textStyle="bold"
+                android:layout_marginTop="12dip"
+                android:layout_marginStart="20dip"
+                android:layout_marginEnd="20dip"
+                android:layout_marginBottom="7dip" />
+
+            <!-- SHA-256 fingerprint: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/sha256_fingerprint_header"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:text="@string/sha256_fingerprint"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/sha256_fingerprint"
+                    android:layout_height="wrap_content"
+                    android:layout_width="match_parent"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+
+            </TableRow>
+
+            <!-- SHA-1 fingerprint: -->
+            <TableRow>
+                <TextView
+                    android:id="@+id/sha1_fingerprint_header"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:text="@string/sha1_fingerprint"
+                    android:layout_marginStart="20dip" />
+
+                <TextView
+                    android:id="@+id/sha1_fingerprint"
+                    android:layout_height="wrap_content"
+                    android:layout_width="match_parent"
+                    android:layout_marginStart="10dip"
+                    android:layout_marginEnd="20dip"
+                    android:layout_marginBottom="7dip" />
+
+            </TableRow>
+
+        </TableLayout>
+
+    </LinearLayout>
+
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout-land/time_picker_material.xml b/android-sdk/platforms/android-34/data/res/layout-land/time_picker_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f3d4a84a2554d9147c6360dd3533607e7e801489
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-land/time_picker_material.xml
@@ -0,0 +1,184 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <RelativeLayout
+        android:id="@+id/time_header"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding">
+
+        <LinearLayout
+            android:id="@+id/time_layout"
+            android:layoutDirection="ltr"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_centerHorizontal="true"
+            android:layout_centerVertical="true"
+            android:paddingTop="@dimen/timepicker_radial_picker_top_margin"
+            android:orientation="horizontal">
+
+            <!-- The hour should always be to the left of the separator,
+                 regardless of the current locale's layout direction. -->
+            <com.android.internal.widget.NumericTextView
+                android:id="@+id/hours"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+                android:background="@drawable/time_picker_editable_background"
+                android:singleLine="true"
+                android:ellipsize="none"
+                android:gravity="right"
+                android:focusable="true"
+                android:pointerIcon="hand"
+                android:nextFocusForward="@+id/minutes" />
+
+            <TextView
+                android:id="@+id/separator"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+                android:importantForAccessibility="no"
+                android:includeFontPadding="false" />
+
+            <!-- The minutes should always be to the right of the separator,
+                 regardless of the current locale's layout direction. -->
+            <com.android.internal.widget.NumericTextView
+                android:id="@+id/minutes"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+                android:background="@drawable/time_picker_editable_background"
+                android:singleLine="true"
+                android:ellipsize="none"
+                android:gravity="left"
+                android:focusable="true"
+                android:pointerIcon="hand"
+                android:nextFocusForward="@+id/am_label" />
+        </LinearLayout>
+
+        <RadioGroup
+            android:id="@+id/ampm_layout"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@+id/time_layout"
+            android:layout_centerHorizontal="true"
+            android:paddingTop="4dp"
+            android:paddingBottom="4dp"
+            android:orientation="vertical"
+            android:layoutDirection="locale">
+            <RadioButton
+                android:id="@+id/am_label"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:padding="8dp"
+                android:layout_marginBottom="-8dp"
+                android:textAppearance="@style/TextAppearance.Material.TimePicker.AmPmLabel"
+                android:lines="1"
+                android:ellipsize="none"
+                android:focusable="true"
+                android:background="?android:attr/selectableItemBackground"
+                android:includeFontPadding="false"
+                android:nextFocusForward="@+id/pm_label"
+                android:button="@null" />
+            <RadioButton
+                android:id="@+id/pm_label"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:padding="8dp"
+                android:textAppearance="@style/TextAppearance.Material.TimePicker.AmPmLabel"
+                android:lines="1"
+                android:ellipsize="none"
+                android:focusable="true"
+                android:background="?android:attr/selectableItemBackground"
+                android:includeFontPadding="false"
+                android:button="@null" />
+        </RadioGroup>
+    </RelativeLayout>
+
+    <TextView
+        android:visibility="gone"
+        android:id="@+id/input_header"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:paddingStart="@dimen/dialog_padding_material"
+        android:paddingEnd="@dimen/dialog_padding_material"
+        android:paddingTop="20dp"
+        android:paddingBottom="20dp"
+        android:includeFontPadding="false"
+        android:textAppearance="@style/TextAppearance.Material.TimePicker.InputHeader"
+        android:text="@string/time_picker_header_text"/>
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+
+        <android.widget.RadialTimePickerView
+            android:id="@+id/radial_picker"
+            android:layout_width="@dimen/timepicker_radial_picker_dimen"
+            android:layout_height="@dimen/timepicker_radial_picker_dimen"
+            android:layout_gravity="center|fill"
+            android:layout_marginTop="@dimen/timepicker_radial_picker_top_margin"
+            android:layout_marginStart="@dimen/timepicker_radial_picker_horizontal_margin"
+            android:layout_marginEnd="@dimen/timepicker_radial_picker_horizontal_margin"
+            android:layoutDirection="locale" />
+
+        <android.widget.TextInputTimePickerView
+            android:id="@+id/input_mode"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingStart="?attr/dialogPreferredPadding"
+            android:paddingEnd="?attr/dialogPreferredPadding"
+            android:visibility="gone" />
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content">
+            <ImageButton
+                android:id="@+id/toggle_mode"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                android:layout_marginStart="12dp"
+                android:layout_marginEnd="12dp"
+                android:padding="12dp"
+                android:background="?attr/selectableItemBackgroundBorderless"
+                android:tint="?attr/colorControlNormal"
+                android:src="@drawable/btn_keyboard_key_material"
+                android:contentDescription="@string/time_picker_text_input_mode_description" />
+            <Space
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_weight="1" />
+            <ViewStub
+                android:id="@id/buttonPanel"
+                android:layout="@layout/alert_dialog_button_bar_material"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layoutDirection="locale" />
+        </LinearLayout>
+    </LinearLayout>
+
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout-large/action_mode_close_item.xml b/android-sdk/platforms/android-34/data/res/layout-large/action_mode_close_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..df06de65dbdc465da7e497a80d9af00500e8f83b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-large/action_mode_close_item.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/action_mode_close_button"
+        android:focusable="true"
+        android:clickable="true"
+        android:paddingStart="8dip"
+        style="?android:attr/actionModeCloseButtonStyle"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_marginEnd="16dip">
+    <ImageView android:layout_width="48dip"
+               android:layout_height="wrap_content"
+               android:layout_gravity="center"
+               android:scaleType="center"
+               android:src="?android:attr/actionModeCloseDrawable" />
+    <TextView android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:layout_gravity="center"
+              android:layout_marginStart="4dip"
+              android:layout_marginEnd="16dip"
+              android:textAppearance="?android:attr/textAppearanceSmall"
+              android:textColor="?android:attr/actionMenuTextColor"
+              android:textSize="12sp"
+              android:textAllCaps="true"
+              android:text="@string/action_mode_done" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-notround-watch/alert_dialog_title_material.xml b/android-sdk/platforms/android-34/data/res/layout-notround-watch/alert_dialog_title_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..08eecef1da95a82acf0d07faebdd62f4f361d464
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-notround-watch/alert_dialog_title_material.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="?attr/dialogPreferredPadding"
+        android:paddingBottom="8dp"
+        android:orientation="vertical"
+        android:gravity="center_horizontal|top">
+    <ImageView android:id="@+id/icon"
+            android:adjustViewBounds="true"
+            android:maxHeight="24dp"
+            android:maxWidth="24dp"
+            android:layout_marginStart="8dp"
+            android:layout_marginBottom="8dp"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:src="@null" />
+    <TextView android:id="@+id/alertTitle"
+            style="?android:attr/windowTitleStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-port/icon_menu_layout.xml b/android-sdk/platforms/android-34/data/res/layout-port/icon_menu_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..82082da14c83a9bef70de97709f0bc0c9ae2734c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-port/icon_menu_layout.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.IconMenuView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/icon_menu" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:rowHeight="66dip"
+    android:maxItems="6"
+    android:maxRows="3"
+    android:maxItemsPerRow="3" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-round-watch/alert_dialog_title_material.xml b/android-sdk/platforms/android-34/data/res/layout-round-watch/alert_dialog_title_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..dac1e324be81d29c4a922bcf02dd75f1cf9bb565
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-round-watch/alert_dialog_title_material.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingBottom="8dp"
+        android:orientation="vertical"
+        android:gravity="top|center_horizontal">
+    <FrameLayout
+            android:adjustViewBounds="true"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:minHeight="@dimen/screen_percentage_15">
+        <ImageView android:id="@+id/icon"
+                android:adjustViewBounds="true"
+                android:maxHeight="24dp"
+                android:maxWidth="24dp"
+                android:layout_marginTop="@dimen/screen_percentage_10"
+                android:layout_gravity="center_horizontal"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:src="@null" />
+    </FrameLayout>
+    <TextView android:id="@+id/alertTitle"
+            style="?android:attr/windowTitleStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-sw600dp/date_picker_dialog.xml b/android-sdk/platforms/android-34/data/res/layout-sw600dp/date_picker_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..cd6af463b8ff41b0af50c0a1f50af7eb102e3ffd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-sw600dp/date_picker_dialog.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<DatePicker xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/datePicker"
+    android:layout_gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:spinnersShown="true"
+    android:calendarViewShown="true"
+    android:dialogMode="true" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-sw600dp/keyguard.xml b/android-sdk/platforms/android-34/data/res/layout-sw600dp/keyguard.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f8f482d15acb137ec6e5095088e41d5a3a32cf18
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-sw600dp/keyguard.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/keyguard.xml
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:paddingStart="20dip"
+    android:paddingTop="20dip"
+    android:paddingEnd="20dip"
+    android:paddingBottom="20dip"
+    android:orientation="vertical" 
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:background="#ff000000">
+
+    <TextView
+        android:id="@+id/label"
+        android:textSize="16sp" 
+        android:textStyle="bold" 
+        android:textColor="#FFFFFFFF" 
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" 
+        android:text="@string/keyguard_label_text" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout-sw600dp/preference_list_content_single.xml b/android-sdk/platforms/android-34/data/res/layout-sw600dp/preference_list_content_single.xml
new file mode 100644
index 0000000000000000000000000000000000000000..88b1aa8d4d0099046266e171f0d441dfefdb8e84
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-sw600dp/preference_list_content_single.xml
@@ -0,0 +1,97 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent">
+
+    <LinearLayout
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+
+        <LinearLayout
+            android:id="@+id/headers"
+            style="?attr/preferencePanelStyle"
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent">
+
+            <ListView
+                android:id="@android:id/list"
+                android:layout_width="match_parent"
+                android:layout_height="0px"
+                android:layout_weight="1"
+                android:drawSelectorOnTop="false"
+                android:cacheColorHint="@android:color/transparent"
+                android:listPreferredItemHeight="48dp"
+                android:scrollbarAlwaysDrawVerticalTrack="true"
+                android:paddingStart="32dip"
+                android:paddingEnd="32dip"
+                android:paddingTop="32dip"
+                android:paddingBottom="32dip"
+                android:clipToPadding="false"/>
+
+            <FrameLayout android:id="@+id/list_footer"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="0" />
+
+        </LinearLayout>
+
+    </LinearLayout>
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-television/autofill_save.xml b/android-sdk/platforms/android-34/data/res/layout-television/autofill_save.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e22100829d5ba7251e5acd7ff571a401d7a19746
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-television/autofill_save.xml
@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- NOTE: outer layout is required to provide proper shadow. -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical">
+
+    <LinearLayout
+        android:orientation="horizontal"
+        android:id="@+id/autofill_save"
+        android:background="?android:attr/colorBackground"
+        android:layout_marginTop="32dp"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingStart="40dp"
+        android:paddingEnd="40dp"
+        android:paddingTop="40dp"
+        android:paddingBottom="40dp">
+
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:layout_marginEnd="32dp">
+
+            <LinearLayout
+                android:orientation="horizontal"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginBottom="6dp">
+
+                <ImageView
+                    android:id="@+id/autofill_save_icon"
+                    android:scaleType="fitStart"
+                    android:layout_marginEnd="10dp"
+                    android:layout_gravity="center_vertical"
+                    android:layout_width="48dp"
+                    android:layout_height="48dp"/>
+                <TextView
+                    android:id="@+id/autofill_save_title"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:text="@string/autofill_save_title"
+                    android:layout_gravity="center_vertical"
+                    android:textSize="24sp" />
+            </LinearLayout>
+
+            <LinearLayout
+                android:id="@+id/autofill_save_custom_subtitle"
+                android:orientation="vertical"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="4dp"
+                android:visibility="gone"/>
+
+        </LinearLayout>
+
+        <LinearLayout
+            android:layout_width="304dp"
+            android:layout_height="wrap_content"
+            android:orientation="vertical">
+
+            <Button
+                android:id="@+id/autofill_save_no"
+                style="?attr/borderlessButtonStyle"
+                android:textAlignment="viewStart"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:text="@string/autofill_save_no">
+            </Button>
+
+            <Button
+                android:id="@+id/autofill_save_yes"
+                style="?attr/borderlessButtonStyle"
+                android:textAlignment="viewStart"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:text="@string/autofill_save_yes">
+            </Button>
+        </LinearLayout>
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_material.xml b/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1d5684550fb9e640c626a0653faf854b0c72cbf6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_material.xml
@@ -0,0 +1,108 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.WatchListDecorLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/parentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent">
+    <ScrollView
+            android:id="@+id/scrollView"
+            android:fillViewport="true"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent">
+        <LinearLayout
+                android:orientation="vertical"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+            <!-- Top Panel -->
+            <FrameLayout
+                    android:paddingLeft="?dialogPreferredPadding"
+                    android:paddingRight="?dialogPreferredPadding"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:id="@+id/topPanel"
+                    android:minHeight="@dimen/dialog_list_padding_top_no_title">
+                <include android:id="@+id/title_template"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        layout="@layout/alert_dialog_title_material"/>
+            </FrameLayout>
+
+            <!-- Content Panel -->
+            <FrameLayout android:id="@+id/contentPanel"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:clipToPadding="false">
+                <TextView android:id="@+id/message"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:gravity="center_horizontal|top"
+                        android:textAppearance="@style/TextAppearance.DeviceDefault.Body1"
+                        android:paddingStart="?dialogPreferredPadding"
+                        android:paddingEnd="?dialogPreferredPadding"
+                        android:paddingTop="8dip"
+                        android:paddingBottom="8dip"/>
+            </FrameLayout>
+
+            <!-- Custom Panel, to replace content panel if needed -->
+            <FrameLayout android:id="@+id/customPanel"
+                    android:layout_width="match_parent"
+                    android:layout_height="match_parent"
+                    android:minHeight="64dp">
+                <FrameLayout android:id="@+android:id/custom"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content" />
+            </FrameLayout>
+
+            <!-- Button Panel -->
+            <FrameLayout
+                    android:id="@+id/buttonPanel"
+                    android:minHeight="@dimen/dialog_list_padding_bottom_no_buttons"
+                    android:layout_weight="1"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content">
+                <LinearLayout
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:layout_gravity="bottom"
+                        android:orientation="vertical"
+                        android:paddingBottom="?dialogPreferredPadding"
+                        style="?android:attr/buttonBarStyle"
+                        android:measureWithLargestChild="true">
+                    <Button android:id="@+id/button1"
+                            android:layout_gravity="start"
+                            android:layout_weight="1"
+                            style="?android:attr/buttonBarButtonStyle"
+                            android:layout_width="match_parent"
+                            android:layout_height="wrap_content" />
+                    <Button android:id="@+id/button3"
+                            android:layout_gravity="start"
+                            android:layout_weight="1"
+                            style="?android:attr/buttonBarButtonStyle"
+                            android:layout_width="match_parent"
+                            android:layout_height="wrap_content" />
+                    <Button android:id="@+id/button2"
+                            android:layout_gravity="start"
+                            android:layout_weight="1"
+                            style="?android:attr/buttonBarButtonStyle"
+                            android:layout_width="match_parent"
+                            android:layout_height="wrap_content" />
+                </LinearLayout>
+            </FrameLayout>
+        </LinearLayout>
+    </ScrollView>
+</com.android.internal.widget.WatchListDecorLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_progress_material.xml b/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_progress_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..686156cfa4c5308bf25147902ededa82289a19e9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/alert_dialog_progress_material.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="match_parent"
+    android:paddingStart="?attr/dialogPreferredPadding"
+    android:paddingTop="@dimen/dialog_padding_top_material"
+    android:paddingEnd="?attr/dialogPreferredPadding"
+    android:paddingBottom="@dimen/dialog_padding_top_material">
+    <TextView
+        android:id="@+id/progress_dialog_message"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_centerInParent="true"
+        style="@style/ProgressDialogMessage" />
+    <ProgressBar
+        android:id="@+id/progress"
+        style="?attr/progressBarStyleHorizontal"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentBottom="true"
+        android:layout_centerHorizontal="true" />
+    <TextView
+        android:id="@+id/progress_percent"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentStart="true"
+        android:layout_below="@id/progress" />
+    <TextView
+        android:id="@+id/progress_number"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentEnd="true"
+        android:layout_below="@id/progress" />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/date_picker_dialog.xml b/android-sdk/platforms/android-34/data/res/layout-watch/date_picker_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b8772bc5ea3cb02b05f72ec9516f0162fd04f6e8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/date_picker_dialog.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<DatePicker xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/datePicker"
+    android:layout_gravity="center_horizontal"
+    android:gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:spinnersShown="true"
+    android:calendarViewShown="false"
+    android:datePickerMode="@integer/date_picker_mode" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/global_actions.xml b/android-sdk/platforms/android-34/data/res/layout-watch/global_actions.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d8e569b40059d2bdc1245c192665b5444b556a61
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/global_actions.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:clipToPadding="false"
+    android:fillViewport="true">
+    <LinearLayout
+        android:id="@+id/actions_container"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:showDividers="middle"
+        android:divider="@drawable/global_action_item_divider"
+        android:orientation="vertical"/>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/global_actions_item.xml b/android-sdk/platforms/android-34/data/res/layout-watch/global_actions_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3d3f34136801b1667d609ecb2b305592431af752
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/global_actions_item.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+	android:layout_height="wrap_content"
+        android:gravity="center"
+        android:minHeight="52dp"
+        android:minWidth="172dp"
+        android:paddingStart="12dp"
+        android:paddingEnd="12dp"
+        android:paddingTop="6dp"
+        android:paddingBottom="6dp"
+        android:background="@drawable/global_actions_item_grey_background">
+
+    <ImageView android:id="@+id/icon"
+            android:duplicateParentState="true"
+            android:scaleType="centerInside"
+            android:gravity="center"
+            android:layout_marginEnd="8dp"
+            android:layout_width="24dp"
+            android:layout_height="24dp"/>
+
+    <TextView android:id="@+id/message"
+            android:duplicateParentState="true"
+            android:ellipsize="end"
+            android:textSize="15sp"
+            android:letterSpacing="0.013"
+            android:fadingEdgeLength="12dp"
+            android:textColor="@android:color/white"
+            android:layout_weight="1"
+            android:fontFamily="google-sans-text-medium"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"/>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/input_method_extract_view.xml b/android-sdk/platforms/android-34/data/res/layout-watch/input_method_extract_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3478bb544934b452418db4af706b949ce0f32acd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/input_method_extract_view.xml
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.inputmethodservice.CompactExtractEditLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:baselineAligned="false">
+
+    <android.inputmethodservice.ExtractEditText
+        android:id="@id/inputExtractEditText"
+        android:layout_width="0dp"
+        android:layout_height="24dp"
+        android:background="@null"
+        android:singleLine="true"
+        android:inputType="text"
+        android:layout_weight="1"
+        android:fontFamily="sans-serif-condensed-light"
+        android:textColor="@color/primary_text_material_dark"
+        android:textColorHint="@color/secondary_text_material_dark"
+        android:textColorHighlight="@color/accent_material_dark"
+        android:textSize="18dp"
+        android:gravity="bottom|right"
+        />
+
+    <FrameLayout
+        android:id="@id/inputExtractAccessories"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginLeft="8dp"
+        android:visibility="visible">
+        <ImageButton
+            android:id="@id/inputExtractAction"
+            android:layout_width="@dimen/input_extract_action_button_width"
+            android:layout_height="@dimen/input_extract_action_button_width"
+            android:background="@drawable/input_extract_action_bg_material_dark"
+            android:padding="@dimen/input_extract_action_icon_padding"
+            android:scaleType="centerInside" />
+    </FrameLayout>
+</android.inputmethodservice.CompactExtractEditLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/preference_list_fragment_material.xml b/android-sdk/platforms/android-34/data/res/layout-watch/preference_list_fragment_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8f2658b357fdb05ebc87855d34327f18deb23b5c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/preference_list_fragment_material.xml
@@ -0,0 +1,93 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent"
+    android:background="@android:color/transparent"
+    android:layout_removeBorders="true">
+
+    <FrameLayout
+        android:id="@android:id/list_container"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+        <com.android.internal.widget.WatchHeaderListView
+            android:id="@android:id/list"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            style="?attr/preferenceFragmentListStyle"
+            android:scrollbarStyle="@integer/preference_fragment_scrollbarStyle"
+            android:clipToPadding="false"
+            android:drawSelectorOnTop="false"
+            android:cacheColorHint="@android:color/transparent"
+            android:scrollbarAlwaysDrawVerticalTrack="true">
+             <TextView
+                android:id="@android:id/title"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:paddingStart="@dimen/dialog_padding_material"
+                android:paddingEnd="@dimen/dialog_padding_material"
+                android:paddingBottom="8dp"
+                android:textAppearance="?android:attr/textAppearanceLarge"
+                android:gravity="center_horizontal|top" />
+        </com.android.internal.widget.WatchHeaderListView>
+    </FrameLayout>
+
+    <TextView android:id="@android:id/empty"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:padding="@dimen/preference_fragment_padding_side"
+        android:gravity="center"
+        android:visibility="gone" />
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/preference_material.xml b/android-sdk/platforms/android-34/data/res/layout-watch/preference_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ad217dbbace921244b1b410970cd4b0c91c1ef20
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/preference_material.xml
@@ -0,0 +1,81 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:background="?attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+
+    <LinearLayout
+        android:id="@+id/icon_frame"
+        android:layout_width="40dp"
+        android:layout_height="40dp"
+        android:gravity="center"
+        android:orientation="horizontal"
+        android:layout_marginEnd="8dp"
+        android:layout_marginTop="8dp"
+        android:layout_marginBottom="8dp">
+        <com.android.internal.widget.PreferenceImageView
+            android:id="@+id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:maxWidth="40dp"
+            android:maxHeight="40dp" />
+    </LinearLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+id/widget_frame"
+        android:layout_width="40dp"
+        android:layout_height="40dp"
+        android:gravity="center"
+        android:orientation="horizontal"
+        android:layout_marginEnd="8dp"
+        android:layout_marginTop="8dp"
+        android:layout_marginBottom="8dp" />
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:layout_marginTop="8dp"
+        android:layout_marginBottom="8dp">
+
+        <TextView android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:maxLines="3"
+            android:textAppearance="?attr/textAppearanceListItem"
+            android:ellipsize="end" />
+
+        <TextView android:id="@+id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/title"
+            android:layout_alignStart="@id/title"
+            android:textAppearance="?attr/textAppearanceListItemSecondary"
+            android:textColor="?attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/preference_widget_switch.xml b/android-sdk/platforms/android-34/data/res/layout-watch/preference_widget_switch.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1f9d67858e56b38f05c10564a7a68255eede93e2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/preference_widget_switch.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a SwitchPreference -->
+<Switch xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/switch_widget"
+    android:layout_width="40dp"
+    android:layout_height="40dp"
+    android:switchMinWidth="40dp"
+    android:layout_gravity="center"
+    android:thumb="@drawable/switch_thumb_watch_default_dark_anim"
+    android:thumbTint="@color/switch_thumb_watch_default_dark"
+    android:thumbTintMode="multiply"
+    android:track="@drawable/watch_switch_track_mtrl"
+    android:trackTint="@color/switch_track_watch_default_dark"
+    android:focusable="false"
+    android:clickable="false"
+    android:background="@null" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/progress_dialog_material.xml b/android-sdk/platforms/android-34/data/res/layout-watch/progress_dialog_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a7df948beb2165ea797ebb40bb1b643ead18d358
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/progress_dialog_material.xml
@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <LinearLayout
+        android:id="@+id/body"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:baselineAligned="false"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingBottom="@dimen/dialog_padding_top_material">
+
+        <ProgressBar
+            android:id="@id/progress"
+            style="?android:attr/progressBarStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:max="10000"
+            android:layout_marginEnd="8dp" />
+
+        <TextView
+            android:id="@+id/message"
+            android:textAppearance="@style/TextAppearance.DeviceDefault.Subhead"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/time_picker_dialog.xml b/android-sdk/platforms/android-34/data/res/layout-watch/time_picker_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..788602bf09ba5dd9771d4704c2fc8fa394c9fd23
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/time_picker_dialog.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<TimePicker xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/timePicker"
+    android:layout_gravity="center_horizontal"
+    android:gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:timePickerMode="@integer/time_picker_mode" />
diff --git a/android-sdk/platforms/android-34/data/res/layout-watch/transient_notification.xml b/android-sdk/platforms/android-34/data/res/layout-watch/transient_notification.xml
new file mode 100644
index 0000000000000000000000000000000000000000..aeae699eaa7dac893ec05f61e72598f0cc080cc2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-watch/transient_notification.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2018, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:paddingHorizontal="@dimen/screen_percentage_05"
+    android:orientation="vertical">
+    <TextView
+        android:id="@android:id/message"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:minHeight="48dp"
+        android:paddingHorizontal="16dp"
+        android:paddingVertical="8dp"
+        android:gravity="center"
+        android:textAppearance="@style/TextAppearance.Toast"
+        android:background="?android:attr/toastFrameBackground"
+        />
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout-xlarge/activity_list.xml b/android-sdk/platforms/android-34/data/res/layout-xlarge/activity_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bf46af8f4f37c108ba44e9f8c8b58dd1f2d6f43d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-xlarge/activity_list.xml
@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.widget.WeightedLinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:paddingTop="9dip"
+    android:paddingBottom="3dip"
+    android:paddingStart="3dip"
+    android:paddingEnd="1dip"
+    android:majorWeightMin="0.45"
+    android:minorWeightMin="0.72"
+    android:majorWeightMax="0.45"
+    android:minorWeightMax="0.72">
+
+    <LinearLayout android:id="@+id/topPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+        <LinearLayout android:id="@+id/title_template"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:gravity="center_vertical|start"
+            android:minHeight="60dip"
+            android:layout_marginStart="32dip"
+            android:layout_marginEnd="32dip">
+            <ImageView android:id="@+id/icon"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingEnd="16dip"
+                android:src="@null"
+                android:visibility="gone" />
+            <com.android.internal.widget.DialogTitle android:id="@+id/alertTitle"
+                style="?android:attr/textAppearanceMedium"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:textAlignment="viewStart" />
+        </LinearLayout>
+        <View android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="2dip"
+            android:background="@android:color/holo_blue_light" />
+        <!-- If the client uses a customTitle, it will be added here. -->
+    </LinearLayout>
+
+    <FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1">
+
+        <ListView
+            android:id="@android:id/list"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            />
+
+        <TextView
+            android:id="@android:id/empty"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:gravity="center"
+            android:text="@string/activity_list_empty"
+            android:visibility="gone"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            />
+    </FrameLayout>
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="54dip"
+        android:orientation="vertical"
+        android:divider="?android:attr/dividerHorizontal"
+        android:showDividers="beginning">
+        <LinearLayout
+            style="?android:attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:measureWithLargestChild="true">
+            <LinearLayout android:id="@+id/leftSpacer"
+                android:layout_weight="0.25"
+                android:layout_width="0dip"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:visibility="gone" />
+            <Button android:id="@+id/button1"
+                android:layout_width="0dip"
+                android:layout_gravity="start"
+                android:layout_weight="1"
+                android:maxLines="2"
+                android:text="@string/cancel"
+                style="?android:attr/buttonBarButtonStyle"
+                android:layout_height="wrap_content" />
+            <LinearLayout android:id="@+id/rightSpacer"
+                android:layout_width="0dip"
+                android:layout_weight="0.25"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:visibility="gone" />
+        </LinearLayout>
+     </LinearLayout>
+</com.android.internal.widget.WeightedLinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout-xlarge/breadcrumbs_in_fragment.xml b/android-sdk/platforms/android-34/data/res/layout-xlarge/breadcrumbs_in_fragment.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8e86427ee8303a3c006b6ac2440ce8b31fc527d7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout-xlarge/breadcrumbs_in_fragment.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+android:id/breadcrumb_section"
+        android:orientation="vertical"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_marginStart="@dimen/preference_fragment_padding_side"
+        android:layout_marginEnd="@dimen/preference_fragment_padding_side"
+    >
+    <android.app.FragmentBreadCrumbs
+            android:id="@android:id/title"
+            android:layout_height="72dip"
+            android:layout_width="match_parent"
+            android:paddingTop="16dip"
+            android:paddingBottom="8dip"
+            android:gravity="center_vertical|start"
+        />
+
+    <ImageView
+            android:layout_width="match_parent"
+            android:layout_height="1dip"
+            android:src="#404040"
+        />
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser.xml b/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2f97bae2a80ec7dd087c7dcb78ab8b49f5f5d622
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser.xml
@@ -0,0 +1,72 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright (C) 2020 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+  -->
+
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:maxWidth="@dimen/resolver_max_width"
+    android:maxCollapsedHeight="256dp"
+    android:maxCollapsedHeightSmall="56dp"
+    android:id="@id/contentPanel">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:orientation="vertical"
+        android:background="?attr/colorBackground"
+        android:paddingTop="8dp"
+        android:paddingBottom="8dp"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding">
+
+        <TextView
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:minHeight="56dp"
+            android:id="@+id/accessibility_button_prompt_prologue"
+            android:textAppearance="?attr/textAppearanceMedium"
+            android:text="@string/accessibility_button_prompt_text"
+            android:gravity="start|center_vertical"
+            android:layout_alignParentStart="true"
+            android:paddingTop="8dp"
+            android:paddingBottom="8dp"/>
+
+        <GridView
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:id="@+id/accessibility_button_chooser_grid"
+            android:columnWidth="90dp"
+            android:numColumns="auto_fit"
+            android:verticalSpacing="10dp"
+            android:horizontalSpacing="10dp"
+            android:stretchMode="columnWidth"
+            android:gravity="center"/>
+
+        <TextView
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:id="@+id/accessibility_button_prompt"
+            android:textAppearance="?attr/textAppearanceMedium"
+            android:text="@string/accessibility_button_instructional_text"
+            android:gravity="start|center_vertical"
+            android:paddingTop="8dp"
+            android:paddingBottom="8dp"
+            android:visibility="gone"/>
+    </LinearLayout>
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser_item.xml b/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..33d6fa2862f761ed30496a190435aaa6aaef4c34
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/accessibility_button_chooser_item.xml
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright (C) 2020 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+  -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minWidth="80dp"
+    android:gravity="center"
+    android:paddingTop="8dp"
+    android:paddingBottom="8dp"
+    android:background="?attr/selectableItemBackgroundBorderless">
+
+    <ImageView
+        android:id="@+id/accessibility_button_target_icon"
+        android:layout_width="48dp"
+        android:layout_height="48dp"
+        android:layout_marginLeft="3dp"
+        android:layout_marginRight="3dp"
+        android:layout_marginBottom="3dp"
+        android:scaleType="fitCenter"/>
+
+    <TextView
+        android:id="@+id/accessibility_button_target_label"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="8dp"
+        android:layout_marginLeft="4dp"
+        android:layout_marginRight="4dp"
+        android:textAppearance="?attr/textAppearanceSmall"
+        android:textColor="?attr/textColorPrimary"
+        android:textSize="12sp"
+        android:fontFamily="sans-serif-condensed"
+        android:gravity="top|center_horizontal"
+        android:minLines="2"
+        android:maxLines="2"
+        android:ellipsize="marquee"/>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/accessibility_enable_service_warning.xml b/android-sdk/platforms/android-34/data/res/layout/accessibility_enable_service_warning.xml
new file mode 100644
index 0000000000000000000000000000000000000000..01ef10177c5a3bdf8d835ed394322f4a8446c0da
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/accessibility_enable_service_warning.xml
@@ -0,0 +1,167 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+    Copyright (C) 2020 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<ScrollView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:textDirection="locale"
+    android:scrollbarStyle="outsideOverlay">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:gravity="center"
+        android:orientation="vertical">
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingStart="24dp"
+            android:paddingEnd="24dp"
+            android:gravity="center"
+            android:orientation="vertical">
+
+            <ImageView
+                android:id="@+id/accessibility_permissionDialog_icon"
+                android:layout_width="36dp"
+                android:layout_height="36dp"
+                android:layout_marginTop="16dp"
+                android:layout_marginBottom="16dp"
+                android:scaleType="fitCenter"/>
+
+            <TextView
+                android:id="@+id/accessibility_permissionDialog_title"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:gravity="center"
+                android:textSize="20sp"
+                android:textColor="?android:attr/textColorPrimary"
+                android:fontFamily="google-sans-medium"/>
+
+            <TextView
+                android:id="@+id/accessibility_permissionDialog_description"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="16dp"
+                android:layout_marginBottom="32dp"
+                android:text="@string/accessibility_service_warning_description"
+                android:textSize="16sp"
+                android:textColor="?android:attr/textColorPrimary"
+                android:fontFamily="sans-serif"/>
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:gravity="center"
+                android:orientation="horizontal">
+
+                <ImageView
+                    android:id="@+id/accessibility_controlScreen_icon"
+                    android:layout_width="18dp"
+                    android:layout_height="18dp"
+                    android:layout_marginRight="12dp"
+                    android:src="@android:drawable/ic_visibility"
+                    android:scaleType="fitCenter"/>
+
+                <TextView
+                    android:id="@+id/accessibility_controlScreen_title"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:text="@string/accessibility_service_screen_control_title"
+                    android:textSize="16sp"
+                    android:textColor="?android:attr/textColorPrimary"
+                    android:fontFamily="sans-serif"/>
+            </LinearLayout>
+
+            <TextView
+                android:id="@+id/accessibility_controlScreen_description"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginBottom="24dp"
+                android:paddingStart="30dp"
+                android:text="@string/accessibility_service_screen_control_description"
+                android:textSize="14sp"
+                android:textColor="?android:attr/textColorSecondary"
+                android:fontFamily="sans-serif"/>
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:gravity="center"
+                android:orientation="horizontal">
+
+                <ImageView
+                    android:id="@+id/accessibility_performAction_icon"
+                    android:layout_width="18dp"
+                    android:layout_height="18dp"
+                    android:layout_marginEnd="12dp"
+                    android:src="@android:drawable/ic_pan_tool"
+                    android:scaleType="fitCenter"/>
+
+                <TextView
+                    android:id="@+id/accessibility_performAction_title"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:text="@string/accessibility_service_action_perform_title"
+                    android:textSize="16sp"
+                    android:textColor="?android:attr/textColorPrimary"
+                    android:fontFamily="sans-serif"/>
+            </LinearLayout>
+
+            <TextView
+                android:id="@+id/accessibility_performAction_description"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginBottom="24dp"
+                android:paddingStart="30dp"
+                android:text="@string/accessibility_service_action_perform_description"
+                android:textSize="14sp"
+                android:textColor="?android:attr/textColorSecondary"
+                android:fontFamily="sans-serif" />
+        </LinearLayout>
+
+        <View
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="@color/chooser_row_divider"/>
+
+        <Button
+            android:id="@+id/accessibility_permission_enable_allow_button"
+            android:layout_width="match_parent"
+            android:layout_height="56dp"
+            android:background="?android:attr/selectableItemBackground"
+            android:text="@string/accessibility_dialog_button_allow"
+            style="?attr/buttonBarPositiveButtonStyle"/>
+
+        <View
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="@color/chooser_row_divider"/>
+
+        <Button
+            android:id="@+id/accessibility_permission_enable_deny_button"
+            android:layout_width="match_parent"
+            android:layout_height="56dp"
+            android:background="?android:attr/selectableItemBackground"
+            android:text="@string/accessibility_dialog_button_deny"
+            style="?attr/buttonBarPositiveButtonStyle"/>
+    </LinearLayout>
+
+</ScrollView>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/accessibility_shortcut_chooser_item.xml b/android-sdk/platforms/android-34/data/res/layout/accessibility_shortcut_chooser_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4d7946b2138bc4c8b146fbac1a5181235e33dc6f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/accessibility_shortcut_chooser_item.xml
@@ -0,0 +1,66 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2017, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="center"
+    android:padding="16dp">
+
+    <CheckBox
+        android:id="@+id/accessibility_shortcut_target_checkbox"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="16dp"
+        android:background="@null"
+        android:clickable="false"
+        android:focusable="false"
+        android:visibility="gone"/>
+
+    <ImageView
+        android:id="@+id/accessibility_shortcut_target_icon"
+        android:layout_width="48dp"
+        android:layout_height="48dp"
+        android:scaleType="fitCenter"/>
+
+    <LinearLayout
+        android:layout_width="0dp"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="16dp"
+        android:layout_weight="1">
+
+        <TextView
+            android:id="@+id/accessibility_shortcut_target_label"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textSize="20sp"
+            android:textColor="?attr/textColorPrimary"
+            android:fontFamily="sans-serif-medium"/>
+    </LinearLayout>
+
+    <TextView
+        android:id="@+id/accessibility_shortcut_target_status"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textSize="20sp"
+        android:textColor="?attr/colorAccent"
+        android:fontFamily="sans-serif-medium"/>
+
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_bar_home.xml b/android-sdk/platforms/android-34/data/res/layout/action_bar_home.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5341f3d035c789c24cf4e5e4b80d3734042883aa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_bar_home.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<view xmlns:android="http://schemas.android.com/apk/res/android"
+      class="com.android.internal.widget.ActionBarView$HomeView"
+      android:layout_width="wrap_content"
+      android:layout_height="match_parent">
+    <ImageView android:id="@android:id/up"
+               android:src="?android:attr/homeAsUpIndicator"
+               android:layout_gravity="center_vertical|start"
+               android:visibility="gone"
+               android:layout_width="wrap_content"
+               android:layout_height="wrap_content"
+               android:layout_marginEnd="-8dip" />
+    <ImageView android:id="@android:id/home"
+               android:layout_width="wrap_content"
+               android:layout_height="wrap_content"
+               android:layout_marginEnd="8dip"
+               android:layout_marginTop="@android:dimen/action_bar_icon_vertical_padding"
+               android:layout_marginBottom="@android:dimen/action_bar_icon_vertical_padding"
+               android:layout_gravity="center"
+               android:adjustViewBounds="true"
+               android:scaleType="fitCenter" />
+</view>
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_bar_home_material.xml b/android-sdk/platforms/android-34/data/res/layout/action_bar_home_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..921345862f889eeb6d7e81b9d15ed9849fd928f0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_bar_home_material.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<view xmlns:android="http://schemas.android.com/apk/res/android"
+    class="com.android.internal.widget.ActionBarView$HomeView"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center_vertical|start">
+    <ImageView android:id="@android:id/up"
+        android:src="?android:attr/homeAsUpIndicator"
+        android:layout_gravity="center_vertical|start"
+        android:visibility="gone"
+        android:layout_width="48dp"
+        android:layout_height="48dp"
+        android:scaleType="centerInside" />
+    <ImageView android:id="@android:id/home"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginEnd="8dip"
+        android:layout_marginTop="@android:dimen/action_bar_icon_vertical_padding"
+        android:layout_marginBottom="@android:dimen/action_bar_icon_vertical_padding"
+        android:adjustViewBounds="true"
+        android:scaleType="fitCenter" />
+</view>
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_bar_title_item.xml b/android-sdk/platforms/android-34/data/res/layout/action_bar_title_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..fecfded83793e8822ed0b604778a39f3b1e1ba42
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_bar_title_item.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:layout_gravity="center_vertical|start"
+              android:orientation="vertical"
+              android:paddingEnd="8dp">
+    <TextView android:id="@+id/action_bar_title"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:singleLine="true"
+              android:ellipsize="end" />
+    <TextView android:id="@+id/action_bar_subtitle"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:layout_marginTop="@dimen/action_bar_subtitle_top_margin"
+              android:singleLine="true"
+              android:ellipsize="end"
+              android:visibility="gone" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_bar_up_container.xml b/android-sdk/platforms/android-34/data/res/layout/action_bar_up_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c6fad643798ca84ca03b76061a95aa8d83d52b27
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_bar_up_container.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+      android:layout_width="wrap_content"
+      android:layout_height="match_parent"
+      android:background="?android:attr/actionBarItemBackground"
+      android:gravity="center_vertical"
+      android:enabled="false">
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_menu_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/action_menu_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6961f8d58f421b83aefc3741e4d1d29e034b1373
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_menu_item_layout.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.ActionMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center"
+    android:gravity="center"
+    android:focusable="true"
+    android:paddingTop="4dip"
+    android:paddingBottom="4dip"
+    android:paddingStart="8dip"
+    android:paddingEnd="8dip"
+    android:textAppearance="?attr/actionMenuTextAppearance"
+    style="?attr/actionButtonStyle" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_menu_layout.xml b/android-sdk/platforms/android-34/data/res/layout/action_menu_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..abf3300c291aa5a9b730f8466eee443bf1f42559
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_menu_layout.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ActionMenuView
+     xmlns:android="http://schemas.android.com/apk/res/android"
+     android:layout_width="wrap_content"
+     android:layout_height="wrap_content"
+     android:divider="?android:attr/actionBarDivider"
+     android:dividerPadding="12dip"
+     android:gravity="center_vertical" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_mode_bar.xml b/android-sdk/platforms/android-34/data/res/layout/action_mode_bar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..dc09fdc43a7f9d9081db0ecea81e56be586671cf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_mode_bar.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<com.android.internal.widget.ActionBarContextView
+     xmlns:android="http://schemas.android.com/apk/res/android"
+     android:layout_width="match_parent"
+     android:layout_height="wrap_content"
+     android:visibility="gone"
+     style="?android:attr/actionModeStyle" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item.xml b/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3df83d09089b576075d122a6900ef2be1fba17f7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/action_mode_close_button"
+        android:focusable="true"
+        android:clickable="true"
+        android:paddingStart="8dip"
+        android:contentDescription="@string/action_mode_done"
+        style="?android:attr/actionModeCloseButtonStyle"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_marginEnd="16dip">
+    <ImageView android:layout_width="wrap_content"
+               android:layout_height="wrap_content"
+               android:layout_gravity="center"
+               android:scaleType="fitCenter"
+               android:src="?android:attr/actionModeCloseDrawable" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..89a179785ef51cfb2f8d309ab2e98cded10968ae
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/action_mode_close_item_material.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ImageButton xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/action_mode_close_button"
+        android:focusable="true"
+        android:clickable="true"
+        android:paddingStart="8dip"
+        android:src="?android:attr/actionModeCloseDrawable"
+        android:contentDescription="@string/action_mode_done"
+        style="?android:attr/actionModeCloseButtonStyle"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_marginEnd="16dip" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view.xml b/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bef17d0c491d626b17b5228dbe93f7863d186ba4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view.xml
@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/activity_chooser_view_content"
+    android:layout_width="wrap_content"
+    android:layout_height="match_parent"
+    android:layout_gravity="center"
+    style="?android:attr/activityChooserViewStyle">
+
+    <FrameLayout
+        android:id="@+id/expand_activities_button"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_gravity="center"
+        android:focusable="true"
+        android:addStatesFromChildren="true"
+        android:background="?android:attr/actionBarItemBackground">
+
+        <ImageView android:id="@+id/image"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_gravity="center"
+            android:layout_marginTop="2dip"
+            android:layout_marginBottom="2dip"
+            android:layout_marginStart="12dip"
+            android:layout_marginEnd="12dip"
+            android:scaleType="fitCenter"
+            android:adjustViewBounds="true" />
+
+    </FrameLayout>
+
+    <FrameLayout
+        android:id="@+id/default_activity_button"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_gravity="center"
+        android:focusable="true"
+        android:addStatesFromChildren="true"
+        android:background="?android:attr/actionBarItemBackground">
+
+        <ImageView android:id="@+id/image"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_gravity="center"
+            android:layout_marginTop="2dip"
+            android:layout_marginBottom="2dip"
+            android:layout_marginStart="12dip"
+            android:layout_marginEnd="12dip"
+            android:scaleType="fitCenter"
+            android:adjustViewBounds="true" />
+
+    </FrameLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4678f76c50e3eb85c09d743ed6fc223a75aa9846
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/activity_chooser_view_list_item.xml
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/list_item"
+    android:layout_width="match_parent"
+    android:layout_height="?attr/dropdownListPreferredItemHeight"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:minWidth="196dip"
+    android:background="?attr/selectableItemBackground"
+    android:orientation="vertical" >
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:duplicateParentState="true" >
+
+        <ImageView
+            android:id="@+id/icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_gravity="center_vertical"
+            android:layout_marginEnd="8dip"
+            android:duplicateParentState="true" />
+
+        <TextView
+            android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:textAppearance="?attr/textAppearanceLargePopupMenu"
+            android:duplicateParentState="true"
+            android:singleLine="true"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/activity_list.xml b/android-sdk/platforms/android-34/data/res/layout/activity_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f489ab76382c0247daa732ec7e42d03bad22d31f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/activity_list.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    >
+
+    <ListView
+        android:id="@android:id/list"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        />
+
+    <TextView
+        android:id="@android:id/empty"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:text="@string/activity_list_empty"
+        android:visibility="gone"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        />
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/activity_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/activity_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d639aa0041b8db6674e3683fa7cb74b2808ba041
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/activity_list_item.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/any/layout/resolve_list_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:paddingTop="1dip"
+    android:paddingBottom="1dip"
+    android:paddingStart="8dip"
+    android:paddingEnd="8dip">
+
+    <ImageView android:id="@+id/icon"
+        android:layout_width="24dip"
+        android:layout_height="24dip"/>
+
+    <TextView android:id="@android:id/text1"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_horizontal"
+        android:paddingStart="?android:attr/listPreferredItemPaddingStart" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/activity_list_item_2.xml b/android-sdk/platforms/android-34/data/res/layout/activity_list_item_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..af1963c7c39aba3d1930f78a066e1ed4a12150fb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/activity_list_item_2.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeight"
+    android:textAppearance="?attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:drawablePadding="14dip"
+    android:textAlignment="viewStart"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/adaptive_notification_wrapper.xml b/android-sdk/platforms/android-34/data/res/layout/adaptive_notification_wrapper.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2583339e2911a2ba7ceda7e371ee3e25205c54c3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/adaptive_notification_wrapper.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:textAppearance="?android:attr/dropDownHintAppearance"
+    android:singleLine="true"
+    android:layout_marginStart="3dip"
+    android:layout_marginTop="3dip"
+    android:layout_marginEnd="3dip"
+    android:layout_marginBottom="3dip"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6869c5fb7935f61886e4f1884f842d48486c9811
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog.xml
@@ -0,0 +1,152 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/alert_dialog.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:paddingTop="9dip"
+    android:paddingBottom="3dip"
+    android:paddingStart="3dip"
+    android:paddingEnd="1dip">
+
+    <LinearLayout android:id="@+id/topPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="54dip"
+        android:orientation="vertical">
+        <LinearLayout android:id="@+id/title_template"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:gravity="center_vertical"
+            android:layout_marginTop="6dip"
+            android:layout_marginBottom="9dip"
+            android:layout_marginStart="10dip"
+            android:layout_marginEnd="10dip">
+            <ImageView android:id="@+id/icon"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="top"
+                android:paddingTop="6dip"
+                android:paddingEnd="10dip"
+                android:src="@drawable/ic_dialog_info" />
+            <com.android.internal.widget.DialogTitle android:id="@+id/alertTitle"
+                style="?android:attr/textAppearanceLarge"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:textAlignment="viewStart" />
+        </LinearLayout>
+        <ImageView android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="1dip"
+            android:visibility="gone"
+            android:scaleType="fitXY"
+            android:gravity="fill_horizontal"
+            android:src="@android:drawable/divider_horizontal_dark" />
+        <!-- If the client uses a customTitle, it will be added here. -->
+    </LinearLayout>
+
+    <LinearLayout android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical">
+        <ScrollView android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingTop="2dip"
+            android:paddingBottom="12dip"
+            android:paddingStart="14dip"
+            android:paddingEnd="10dip"
+            android:overScrollMode="ifContentScrolls">
+            <TextView android:id="@+id/message"
+                style="?android:attr/textAppearanceMedium"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:padding="5dip" />
+        </ScrollView>
+    </LinearLayout>
+
+    <FrameLayout android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1">
+        <FrameLayout android:id="@+android:id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingTop="5dip"
+            android:paddingBottom="5dip" />
+    </FrameLayout>
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="54dip"
+        android:orientation="vertical" >
+        <LinearLayout
+            style="?android:attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:paddingTop="4dip"
+            android:paddingStart="2dip"
+            android:paddingEnd="2dip"
+            android:measureWithLargestChild="true">
+            <LinearLayout android:id="@+id/leftSpacer"
+                android:layout_weight="0.25"
+                android:layout_width="0dip"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:visibility="gone" />
+            <Button android:id="@+id/button1"
+                android:layout_width="0dip"
+                android:layout_gravity="start"
+                android:layout_weight="1"
+                style="?android:attr/buttonBarPositiveButtonStyle"
+                android:maxLines="2"
+                android:layout_height="wrap_content" />
+            <Button android:id="@+id/button3"
+                android:layout_width="0dip"
+                android:layout_gravity="center_horizontal"
+                android:layout_weight="1"
+                style="?android:attr/buttonBarNeutralButtonStyle"
+                android:maxLines="2"
+                android:layout_height="wrap_content" />
+            <Button android:id="@+id/button2"
+                android:layout_width="0dip"
+                android:layout_gravity="end"
+                android:layout_weight="1"
+                style="?android:attr/buttonBarNegativeButtonStyle"
+                android:maxLines="2"
+                android:layout_height="wrap_content" />
+            <LinearLayout android:id="@+id/rightSpacer"
+                android:layout_width="0dip"
+                android:layout_weight="0.25"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:visibility="gone" />
+        </LinearLayout>
+     </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_leanback.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_leanback.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ea94af662dcfe23f92e6f702f80213ad19d73047
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_leanback.xml
@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2021 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+            android:id="@+id/buttonPanel"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:scrollbarAlwaysDrawVerticalTrack="true"
+            android:scrollIndicators="top|bottom"
+            android:fillViewport="true"
+            style="?attr/buttonBarStyle">
+    <com.android.internal.widget.ButtonBarLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layoutDirection="locale"
+        android:orientation="horizontal"
+        android:gravity="start">
+
+        <Button
+            android:id="@+id/button1"
+            style="?attr/buttonBarPositiveButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+
+        <Button
+            android:id="@+id/button2"
+            style="?attr/buttonBarNegativeButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+
+        <Space
+            android:id="@+id/spacer"
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:layout_weight="1"
+            android:visibility="invisible" />
+
+        <Button
+            android:id="@+id/button3"
+            style="?attr/buttonBarNeutralButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+
+    </com.android.internal.widget.ButtonBarLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_material.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e879d81990c13a95b4f47139f38b0b456909c216
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_button_bar_material.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+            android:id="@+id/buttonPanel"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:scrollbarAlwaysDrawVerticalTrack="true"
+            android:scrollIndicators="top|bottom"
+            android:fillViewport="true"
+            style="?attr/buttonBarStyle">
+    <com.android.internal.widget.ButtonBarLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layoutDirection="locale"
+        android:orientation="horizontal"
+        android:paddingStart="12dp"
+        android:paddingEnd="12dp"
+        android:paddingTop="4dp"
+        android:paddingBottom="4dp"
+        android:gravity="bottom">
+
+        <Button
+            android:id="@+id/button3"
+            style="?attr/buttonBarNeutralButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+
+        <Space
+            android:id="@+id/spacer"
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:layout_weight="1"
+            android:visibility="invisible" />
+
+        <Button
+            android:id="@+id/button2"
+            style="?attr/buttonBarNegativeButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+
+        <Button
+            android:id="@+id/button1"
+            style="?attr/buttonBarPositiveButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+    </com.android.internal.widget.ButtonBarLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_holo.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..34cb21d4f7f5f6e20196a5ab8e090baf77a0704a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_holo.xml
@@ -0,0 +1,142 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_marginStart="8dip"
+    android:layout_marginEnd="8dip"
+    android:orientation="vertical">
+
+    <LinearLayout android:id="@+id/topPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+        <View android:id="@+id/titleDividerTop"
+            android:layout_width="match_parent"
+            android:layout_height="2dip"
+            android:visibility="gone"
+            android:background="@android:color/holo_blue_light" />
+        <LinearLayout android:id="@+id/title_template"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:gravity="center_vertical|start"
+            android:minHeight="@dimen/alert_dialog_title_height"
+            android:layout_marginStart="16dip"
+            android:layout_marginEnd="16dip">
+            <ImageView android:id="@+id/icon"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingEnd="8dip"
+                android:src="@null" />
+            <com.android.internal.widget.DialogTitle android:id="@+id/alertTitle"
+                style="?android:attr/windowTitleStyle"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:textAlignment="viewStart" />
+        </LinearLayout>
+        <View android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="2dip"
+            android:visibility="gone"
+            android:background="@android:color/holo_blue_light" />
+        <!-- If the client uses a customTitle, it will be added here. -->
+    </LinearLayout>
+
+    <LinearLayout android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:minHeight="64dp">
+        <ScrollView android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clipToPadding="false">
+            <TextView android:id="@+id/message"
+                style="?android:attr/textAppearanceMedium"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:paddingStart="16dip"
+                android:paddingEnd="16dip"
+                android:paddingTop="8dip"
+                android:paddingBottom="8dip"/>
+        </ScrollView>
+    </LinearLayout>
+
+    <FrameLayout android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:minHeight="64dp">
+        <FrameLayout android:id="@+android:id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    </FrameLayout>
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="@dimen/alert_dialog_button_bar_height"
+        android:orientation="vertical"
+        android:divider="?android:attr/dividerHorizontal"
+        android:showDividers="beginning"
+        android:dividerPadding="0dip">
+        <LinearLayout
+            style="?android:attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:layoutDirection="locale"
+            android:measureWithLargestChild="true">
+            <Button android:id="@+id/button2"
+                android:layout_width="wrap_content"
+                android:layout_gravity="start"
+                android:layout_weight="1"
+                android:maxLines="2"
+                style="?android:attr/buttonBarButtonStyle"
+                android:textSize="14sp"
+                android:minHeight="@dimen/alert_dialog_button_bar_height"
+                android:layout_height="wrap_content" />
+            <Button android:id="@+id/button3"
+                android:layout_width="wrap_content"
+                android:layout_gravity="center_horizontal"
+                android:layout_weight="1"
+                android:maxLines="2"
+                style="?android:attr/buttonBarButtonStyle"
+                android:textSize="14sp"
+                android:minHeight="@dimen/alert_dialog_button_bar_height"
+                android:layout_height="wrap_content" />
+            <Button android:id="@+id/button1"
+                android:layout_width="wrap_content"
+                android:layout_gravity="end"
+                android:layout_weight="1"
+                android:maxLines="2"
+                android:minHeight="@dimen/alert_dialog_button_bar_height"
+                style="?android:attr/buttonBarButtonStyle"
+                android:textSize="14sp"
+                android:layout_height="wrap_content" />
+        </LinearLayout>
+     </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback.xml
new file mode 100644
index 0000000000000000000000000000000000000000..091613fd9b56392650caedb8eb403f66272e64ae
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback.xml
@@ -0,0 +1,84 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2021 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.widget.AlertDialogLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="start|top"
+    android:orientation="vertical">
+
+    <include layout="@layout/alert_dialog_title_material" />
+
+    <FrameLayout
+        android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <ScrollView
+            android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clipToPadding="false">
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="vertical">
+
+                <Space
+                    android:id="@+id/textSpacerNoTitle"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/dialog_padding_top_material" />
+
+                <TextView
+                    android:id="@+id/message"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:paddingEnd="?attr/dialogPreferredPadding"
+                    android:paddingStart="?attr/dialogPreferredPadding"
+                    style="@style/TextAppearance.Material.Subhead" />
+
+                <Space
+                    android:id="@+id/textSpacerNoButtons"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/dialog_padding_top_material" />
+            </LinearLayout>
+        </ScrollView>
+    </FrameLayout>
+
+    <FrameLayout
+        android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <FrameLayout
+            android:id="@+id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    </FrameLayout>
+
+    <include
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        layout="@layout/alert_dialog_button_bar_leanback" />
+</com.android.internal.widget.AlertDialogLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback_button_panel_side.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback_button_panel_side.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c6e8b3b7cd614b87c613c62ef65ca11b11555c53
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_leanback_button_panel_side.xml
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal">
+
+   <LinearLayout
+       android:id="@+id/leftPanel"
+       android:layout_width="0dp"
+       android:layout_weight="1"
+       android:layout_height="wrap_content"
+       android:orientation="vertical">
+
+    <LinearLayout android:id="@+id/topPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+        <LinearLayout android:id="@+id/title_template"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:gravity="center_vertical|start"
+            android:paddingStart="16dip"
+            android:paddingEnd="16dip"
+            android:paddingTop="16dip"
+            android:paddingBottom="8dip">
+            <ImageView android:id="@+id/icon"
+                android:layout_width="32dip"
+                android:layout_height="32dip"
+                android:layout_marginEnd="8dip"
+                android:scaleType="fitCenter"
+                android:src="@null" />
+            <com.android.internal.widget.DialogTitle android:id="@+id/alertTitle"
+                style="?attr/windowTitleStyle"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:textAlignment="viewStart" />
+        </LinearLayout>
+        <!-- If the client uses a customTitle, it will be added here. -->
+    </LinearLayout>
+
+    <LinearLayout android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:minHeight="64dp">
+        <ScrollView android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clipToPadding="false">
+            <TextView android:id="@+id/message"
+                style="?attr/textAppearanceMedium"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:paddingStart="16dip"
+                android:paddingEnd="16dip"
+                android:paddingTop="16dip"
+                android:paddingBottom="16dip" />
+        </ScrollView>
+    </LinearLayout>
+
+    <FrameLayout android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:minHeight="64dp">
+        <FrameLayout android:id="@+id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    </FrameLayout>
+    </LinearLayout>
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        style="?attr/buttonBarStyle"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:orientation="vertical"
+        android:gravity="end">
+        <LinearLayout
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layoutDirection="locale"
+            android:orientation="vertical">
+            <Button android:id="@+id/button3"
+                style="?attr/buttonBarNeutralButtonStyle"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:maxLines="2"
+                android:minHeight="@dimen/alert_dialog_button_bar_height" />
+            <Button android:id="@+id/button2"
+                style="?attr/buttonBarNegativeButtonStyle"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:maxLines="2"
+                android:minHeight="@dimen/alert_dialog_button_bar_height" />
+            <Button android:id="@+id/button1"
+                style="?attr/buttonBarPositiveButtonStyle"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:maxLines="2"
+                android:minHeight="@dimen/alert_dialog_button_bar_height" />
+        </LinearLayout>
+     </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_material.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..178505c264a46fe566c309a3db304fe6007a3938
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_material.xml
@@ -0,0 +1,84 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.widget.AlertDialogLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="start|top"
+    android:orientation="vertical">
+
+    <include layout="@layout/alert_dialog_title_material" />
+
+    <FrameLayout
+        android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <ScrollView
+            android:id="@+id/scrollView"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clipToPadding="false">
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="vertical">
+
+                <Space
+                    android:id="@+id/textSpacerNoTitle"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/dialog_padding_top_material" />
+
+                <TextView
+                    android:id="@+id/message"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:paddingEnd="?attr/dialogPreferredPadding"
+                    android:paddingStart="?attr/dialogPreferredPadding"
+                    style="@style/TextAppearance.Material.Subhead" />
+
+                <Space
+                    android:id="@+id/textSpacerNoButtons"
+                    android:visibility="gone"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/dialog_padding_top_material" />
+            </LinearLayout>
+        </ScrollView>
+    </FrameLayout>
+
+    <FrameLayout
+        android:id="@+id/customPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="48dp">
+
+        <FrameLayout
+            android:id="@+id/custom"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    </FrameLayout>
+
+    <include
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        layout="@layout/alert_dialog_button_bar_material" />
+</com.android.internal.widget.AlertDialogLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress.xml
new file mode 100644
index 0000000000000000000000000000000000000000..fe06b6543d608bc8692894c68dfee07b82780c71
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress.xml
@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content" android:layout_height="match_parent">
+        <ProgressBar android:id="@+id/progress"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="12dip"
+            android:layout_marginBottom="1dip"
+            android:layout_marginStart="10dip"
+            android:layout_marginEnd="10dip"
+            android:layout_centerHorizontal="true" />
+        <TextView
+            android:id="@+id/progress_percent"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingBottom="12dip"
+            android:layout_marginStart="10dip"
+            android:layout_marginEnd="10dip"
+            android:layout_alignParentStart="true"
+            android:layout_below="@id/progress"
+        />
+        <TextView
+            android:id="@+id/progress_number"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingBottom="12dip"
+            android:layout_marginStart="10dip"
+            android:layout_marginEnd="10dip"
+            android:layout_alignParentEnd="true"
+            android:layout_below="@id/progress"
+        />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_holo.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..41773d25fde38da969ec77ed34fba3202236cf7f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_holo.xml
@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content" android:layout_height="match_parent">
+        <ProgressBar android:id="@+id/progress"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="16dip"
+            android:layout_marginBottom="1dip"
+            android:layout_marginStart="16dip"
+            android:layout_marginEnd="16dip"
+            android:layout_centerHorizontal="true" />
+        <TextView
+            android:id="@+id/progress_percent"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingBottom="16dip"
+            android:layout_marginStart="16dip"
+            android:layout_marginEnd="16dip"
+            android:layout_alignParentStart="true"
+            android:layout_below="@id/progress"
+        />
+        <TextView
+            android:id="@+id/progress_number"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingBottom="16dip"
+            android:layout_marginStart="16dip"
+            android:layout_marginEnd="16dip"
+            android:layout_alignParentEnd="true"
+            android:layout_below="@id/progress"
+        />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_material.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9c21540c7929b94963771e6dd68308fd4aefa0dd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_progress_material.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="match_parent"
+    android:paddingStart="?attr/dialogPreferredPadding"
+    android:paddingTop="@dimen/dialog_padding_top_material"
+    android:paddingEnd="?attr/dialogPreferredPadding"
+    android:paddingBottom="@dimen/dialog_padding_top_material">
+    <ProgressBar
+        android:id="@+id/progress"
+        style="?attr/progressBarStyleHorizontal"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_centerHorizontal="true" />
+    <TextView
+        android:id="@+id/progress_percent"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentStart="true"
+        android:layout_below="@id/progress" />
+    <TextView
+        android:id="@+id/progress_number"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentEnd="true"
+        android:layout_below="@id/progress" />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/alert_dialog_title_material.xml b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_title_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..eef95859cab6412fd3a01277a6cc4b26fcd98f5a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/alert_dialog_title_material.xml
@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:id="@+id/topPanel"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:orientation="vertical">
+
+    <!-- If the client uses a customTitle, it will be added here. -->
+
+    <LinearLayout
+        android:id="@+id/title_template"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:gravity="center_vertical|start"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material">
+
+        <ImageView
+            android:id="@+id/icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_marginEnd="8dip"
+            android:scaleType="fitCenter"
+            android:src="@null" />
+
+        <com.android.internal.widget.DialogTitle
+            android:id="@+id/alertTitle"
+            android:singleLine="true"
+            android:ellipsize="end"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:textAlignment="viewStart"
+            style="?attr/windowTitleStyle" />
+    </LinearLayout>
+
+    <Space
+        android:id="@+id/titleDividerNoCustom"
+        android:visibility="gone"
+        android:layout_width="match_parent"
+        android:layout_height="@dimen/dialog_title_divider_material" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/always_use_checkbox.xml b/android-sdk/platforms/android-34/data/res/layout/always_use_checkbox.xml
new file mode 100644
index 0000000000000000000000000000000000000000..16a1bb2def9cb98d1c566518abb7f6d717f80958
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/always_use_checkbox.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Check box that is displayed in the activity resolver UI for the user
+     to make their selection the preferred activity. -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:paddingStart="14dip"
+    android:paddingEnd="15dip"
+    android:orientation="vertical">
+    
+    <CheckBox
+        android:id="@+id/alwaysUse"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:focusable="true"
+        android:clickable="true" />
+    
+    <TextView 
+        android:id="@+id/clearDefaultHint"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:paddingStart="36dip"
+        android:visibility="gone"
+        android:text="@string/clearDefaultHintMsg" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/am_compat_mode_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/am_compat_mode_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8a0975d595e86f82e6cc9b424486aef73c1f385c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/am_compat_mode_dialog.xml
@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent" android:layout_height="match_parent"
+        android:layout_marginStart="40dp" android:layout_marginEnd="40dp"
+        android:layout_marginTop="15dp" android:layout_marginBottom="15dp"
+        android:orientation="vertical">
+    <LinearLayout
+            android:layout_width="wrap_content" android:layout_height="wrap_content"
+            android:layout_gravity="center_horizontal"
+            android:orientation="horizontal" android:baselineAligned="true">
+        <TextView android:layout_width="wrap_content" android:layout_height="wrap_content"
+                android:layout_marginStart="10dp" android:layout_marginEnd="10dp"
+                android:textColor="?android:attr/textColorPrimary"
+                android:textSize="18sp"
+                android:text="@string/screen_compat_mode_scale"
+                />
+        <Switch
+                android:id="@+id/compat_checkbox"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                android:layout_marginEnd="10dp"
+                />
+    </LinearLayout>
+
+    <View android:layout_width="wrap_content" android:layout_height="1dp"
+            android:layout_marginTop="10dp" android:layout_marginBottom="10dp"
+            android:background="@android:drawable/divider_horizontal_dark"
+            />
+
+    <CheckBox android:id="@+id/ask_checkbox"
+            android:layout_width="wrap_content" android:layout_height="wrap_content"
+            android:layout_gravity="center_horizontal"
+            android:text="@string/screen_compat_mode_show"
+            />
+    <TextView
+        android:id="@+id/reask_hint"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:gravity="center"
+        android:visibility="invisible"
+        android:text="@string/screen_compat_mode_hint" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_anr_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/app_anr_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5ad0f4c0f6cc75e7ca72f6c9b5fb841f3d650d7b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_anr_dialog.xml
@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        android:paddingTop="@dimen/aerr_padding_list_top"
+        android:paddingBottom="@dimen/aerr_padding_list_bottom">
+
+    <Button
+            android:id="@+id/aerr_close"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/aerr_close_app"
+            android:drawableStart="@drawable/ic_close"
+            style="@style/aerr_list_item" />
+
+    <Button
+            android:id="@+id/aerr_wait"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/aerr_wait"
+            android:drawableStart="@drawable/ic_schedule"
+            style="@style/aerr_list_item" />
+
+    <Button
+            android:id="@+id/aerr_report"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/aerr_report"
+            android:drawableStart="@drawable/ic_feedback"
+            style="@style/aerr_list_item" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_error_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/app_error_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c3b149a1e2959596ba3989b5b9a7e1483c9960b9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_error_dialog.xml
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:paddingTop="@dimen/aerr_padding_list_top"
+    android:paddingBottom="@dimen/aerr_padding_list_bottom">
+
+    <Button
+        android:id="@+id/aerr_restart"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:text="@string/aerr_restart"
+        android:drawableStart="@drawable/ic_refresh"
+        style="@style/aerr_list_item" />
+
+    <Button
+        android:id="@+id/aerr_app_info"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:text="@string/app_info"
+        android:drawableStart="@drawable/ic_info_outline_24"
+        style="@style/aerr_list_item" />
+
+    <Button
+        android:id="@+id/aerr_close"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:text="@string/aerr_close_app"
+        android:drawableStart="@drawable/ic_close"
+        style="@style/aerr_list_item" />
+
+    <Button
+        android:id="@+id/aerr_report"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:text="@string/aerr_report"
+        android:drawableStart="@drawable/ic_feedback"
+        style="@style/aerr_list_item" />
+
+    <Button
+        android:id="@+id/aerr_mute"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:text="@string/aerr_mute"
+        android:drawableStart="@drawable/ic_eject_24dp"
+        style="@style/aerr_list_item" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_language_picker_current_locale_item.xml b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_current_locale_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..990e26c8f6bee1c3ac527e38d1c65a7f52c49142
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_current_locale_item.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+    <FrameLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight=".8">
+        <include
+            android:id="@+id/language_picker_item"
+            layout="@layout/language_picker_item" />
+    </FrameLayout>
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight=".2"
+        android:gravity="center"
+        android:minHeight="?android:attr/listPreferredItemHeight">
+        <ImageView
+            android:id="@+id/imageView"
+            android:layout_width="24dp"
+            android:layout_height="24dp"
+            android:src="@drawable/ic_check_24dp"
+            app:tint="?attr/colorAccentPrimaryVariant"/>
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_current.xml b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_current.xml
new file mode 100644
index 0000000000000000000000000000000000000000..300da25ea4455ef4923aa73a0dc4b6eff88e5ec0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_current.xml
@@ -0,0 +1,45 @@
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+
+    <FrameLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight=".8">
+        <include
+            android:id="@+id/system_language_view"
+            layout="@layout/app_language_picker_system_default" />
+    </FrameLayout>
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight=".2"
+        android:gravity="center"
+        android:minHeight="?android:attr/listPreferredItemHeight">
+        <ImageView
+            android:id="@+id/imageView"
+            android:layout_width="24dp"
+            android:layout_height="24dp"
+            android:src="@drawable/ic_check_24dp"
+            app:tint="?attr/colorAccentPrimaryVariant"/>
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_default.xml b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_default.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d9883bc3df04f5203729a86231abc6c157fc17f1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_language_picker_system_default.xml
@@ -0,0 +1,42 @@
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:orientation="vertical"
+    android:paddingTop="8dp">
+    <TextView xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:id="@+id/locale"
+              android:gravity="center_vertical"
+              android:textAppearance="?android:attr/textAppearanceListItem"
+              android:textDirection="locale"
+              android:layoutDirection="locale"
+              android:layout_weight="1" />
+
+    <TextView
+        android:id="@+id/system_locale_subtitle"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+        android:textColor="?android:attr/textColorSecondary"
+        android:layout_weight="1" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_not_authorized.xml b/android-sdk/platforms/android-34/data/res/layout/app_not_authorized.xml
new file mode 100644
index 0000000000000000000000000000000000000000..339b24e86ae562c2c83d3b1014e844c9bd0caf73
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_not_authorized.xml
@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2013, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+
+    <!-- Customizable description text -->
+    <TextView android:id="@+id/description"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start|center_vertical"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:text="@string/error_message_change_not_allowed"
+        style="@style/TextAppearance.Material.Subhead" />
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        style="?attr/buttonBarStyle"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layoutDirection="locale"
+        android:orientation="horizontal"
+        android:paddingStart="12dp"
+        android:paddingEnd="12dp"
+        android:paddingTop="8dp"
+        android:paddingBottom="8dp"
+        android:gravity="bottom">
+        <Space
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:layout_weight="1"
+            android:visibility="invisible" />
+        <Button android:id="@+id/button1"
+            style="?attr/buttonBarNegativeButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:text="@android:string/yes"
+            android:onClick="onCancelButtonClicked" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_permission_item.xml b/android-sdk/platforms/android-34/data/res/layout/app_permission_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..383d771074e097cb1ed22d6db6a1cd37b6fcd330
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_permission_item.xml
@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+  Defines the layout of a single permission item.
+-->
+
+<view class="android.widget.AppSecurityPermissions$PermissionItemView"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:background="?android:attr/selectableItemBackground">
+
+    <ImageView
+        android:id="@+id/perm_icon"
+        android:layout_width="24dp"
+        android:layout_height="24dp"
+        android:layout_marginStart="16dp"
+        android:layout_marginEnd="8dp"
+        android:scaleType="fitCenter"
+        android:tint="@android:color/black"/>
+
+    <ImageView
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:background="?android:attr/dividerVertical" />
+
+    <TextView
+        android:id="@+id/perm_name"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:textSize="16sp"
+        android:layout_marginStart="8dp"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="top|left" />
+
+</view>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_permission_item_money.xml b/android-sdk/platforms/android-34/data/res/layout/app_permission_item_money.xml
new file mode 100644
index 0000000000000000000000000000000000000000..764c883e0345774cfa8691f3d8e7556e1485bed9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_permission_item_money.xml
@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2012 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+  Defines the layout of a single permission item that costs money.
+-->
+
+<view class="android.widget.AppSecurityPermissions$PermissionItemView"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:background="?android:attr/selectableItemBackground">
+
+    <ImageView
+        android:id="@+id/perm_icon"
+        android:layout_width="24dp"
+        android:layout_height="24dp"
+        android:layout_marginStart="16dp"
+        android:layout_marginEnd="8dp"
+        android:scaleType="fitCenter" />
+
+    <ImageView
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:background="?android:attr/dividerVertical" />
+
+    <RelativeLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="8dp">
+        <TextView
+            android:id="@+id/perm_name"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textSize="16sp"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentStart="true"
+            android:layout_alignParentTop="true" />
+        <ImageView
+            android:id="@+id/perm_money_icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentStart="true"
+            android:layout_alignBottom="@+id/perm_money_label"
+            android:scaleType="fitCenter"
+            android:tint="?android:attr/colorError"
+            android:tintMode="src_in"
+            android:src="@android:drawable/ic_coins_s" />
+        <TextView
+            android:id="@+id/perm_money_label"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textSize="16sp"
+            android:textColor="?android:attr/colorError"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_toEndOf="@id/perm_money_icon"
+            android:layout_below="@id/perm_name"
+            android:layout_marginStart="8dp"
+            android:text="@string/perm_costs_money" />
+    </RelativeLayout>
+
+</view>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_permission_item_old.xml b/android-sdk/platforms/android-34/data/res/layout/app_permission_item_old.xml
new file mode 100644
index 0000000000000000000000000000000000000000..de6fc4fcbb0a0cecff3ebd9d3774ba3551814c06
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_permission_item_old.xml
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+  Defines the layout of a single permission item.
+  Contains the group name and a list of permission labels under the group.
+-->
+
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <ImageView
+        android:id="@+id/perm_icon"
+        android:layout_width="24dip"
+        android:layout_height="24dip"
+        android:layout_alignParentStart="true"
+        android:scaleType="fitCenter" />
+
+
+    <TextView
+        android:id="@+id/permission_group"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:textStyle="bold"
+        android:paddingStart="6dip"
+        android:layout_toEndOf="@id/perm_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <TextView
+        android:id="@+id/permission_list"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:layout_marginTop="-4dip"
+        android:paddingBottom="8dip"
+        android:paddingStart="6dip"
+        android:layout_below="@id/permission_group"
+        android:layout_toEndOf="@id/perm_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/app_perms_summary.xml b/android-sdk/platforms/android-34/data/res/layout/app_perms_summary.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b8d93aca755b9693fc9b038c48e7585f8d1061b0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/app_perms_summary.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Describes permission item consisting of a group name and the list of permisisons under the group -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+
+    <TextView
+        android:id="@+id/no_permissions"
+        android:text="@string/no_permissions"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:paddingStart="8dp"
+        android:paddingEnd="8dp"
+        android:visibility="gone"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <!-- Populated with all permissions. -->
+    <LinearLayout
+        android:id="@+id/perms_list"
+        android:orientation="vertical"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content" />
+
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/auto_complete_list.xml b/android-sdk/platforms/android-34/data/res/layout/auto_complete_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..72beb2bb5b6d9e7d317800798e261b644916eca9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/auto_complete_list.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:id="@+id/content"
+    android:orientation="vertical"
+    android:layout_width="match_parent" 
+    android:layout_height="wrap_content"
+    android:background="@android:drawable/edit_text"
+    android:divider="@android:drawable/divider_horizontal_textfield"
+    android:addStatesFromChildren="true">
+
+    <LinearLayout android:id="@+id/container"
+        android:orientation="vertical"
+        android:layout_width="match_parent" 
+        android:layout_height="wrap_content"
+        android:paddingEnd="0dip"
+    />
+
+    <AutoCompleteTextView android:id="@+id/edit"
+        android:completionThreshold="1"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:singleLine="true"
+        android:layout_gravity="center_vertical"
+    />   
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker.xml b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker.xml
new file mode 100644
index 0000000000000000000000000000000000000000..dca01286c9f7d6b6eb0b69fd311a452ca0bff1c9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker.xml
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout  xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/autofill_dataset_picker"
+    android:layout_width="fill_parent"
+    android:layout_height="fill_parent"
+    android:foreground="?attr/listChoiceBackgroundIndicator"
+    style="@style/AutofillDatasetPicker">
+
+    <ListView
+        android:id="@+id/autofill_dataset_list"
+        android:layout_width="fill_parent"
+        android:layout_height="fill_parent"
+        android:drawSelectorOnTop="true"
+        android:clickable="true"
+        android:divider="@null"
+        android:visibility="gone">
+    </ListView>
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_fullscreen.xml b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_fullscreen.xml
new file mode 100644
index 0000000000000000000000000000000000000000..90435e9859e7b8c966c7a823148fd5a073e32a17
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_fullscreen.xml
@@ -0,0 +1,87 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="horizontal"
+    android:background="?android:attr/windowBackground"
+    android:paddingStart="40dp"
+    android:paddingEnd="40dp"
+    android:paddingTop="40dp"
+    android:paddingBottom="40dp">
+
+    <LinearLayout
+        android:orientation="vertical"
+        android:layout_width="0dp"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:layout_marginEnd="32dp">
+
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginBottom="6dp"
+            >
+            <ImageView
+                android:id="@+id/autofill_dataset_icon"
+                android:scaleType="fitStart"
+                android:layout_marginEnd="10dp"
+                android:layout_gravity="center_vertical"
+                android:layout_width="48dp"
+                android:layout_height="48dp"/>
+            <TextView
+                android:id="@+id/autofill_dataset_title"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                android:textSize="24sp" />
+        </LinearLayout>
+
+        <LinearLayout
+            android:id="@+id/autofill_dataset_header"
+            android:visibility="gone"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="vertical"/>
+
+    </LinearLayout>
+
+    <!-- autofill_dataset_picker is the common parent for inserting authentication item or
+         autofill_dataset_list, autofill_dataset_footer-->
+    <LinearLayout
+        android:layout_width="304dp"
+        android:layout_height="wrap_content"
+        android:id="@+id/autofill_dataset_picker"
+        android:foreground="?attr/listChoiceBackgroundIndicator"
+        android:orientation="vertical">
+        <ListView
+            android:id="@+id/autofill_dataset_list"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:clickable="true"
+            android:divider="@null"
+            android:drawSelectorOnTop="true"
+            android:visibility="gone"/>
+        <LinearLayout
+            android:id="@+id/autofill_dataset_footer"
+            android:visibility="gone"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="vertical"/>
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_header_footer.xml b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_header_footer.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4d5f4f09d29e1219ecaf54bdbf6d141c0f05b47c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/autofill_dataset_picker_header_footer.xml
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout  xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/autofill_dataset_picker"
+    android:layout_width="fill_parent"
+    android:layout_height="fill_parent"
+    android:foreground="?attr/listChoiceBackgroundIndicator"
+    style="@style/AutofillDatasetPicker">
+
+    <LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+
+      <LinearLayout
+          android:id="@+id/autofill_dataset_header"
+          android:visibility="gone"
+          android:layout_width="fill_parent"
+          android:layout_height="wrap_content"
+          android:orientation="vertical"/>
+
+      <ListView
+          android:id="@+id/autofill_dataset_list"
+          android:layout_weight="1"
+          android:layout_width="fill_parent"
+          android:layout_height="0dp"
+          android:drawSelectorOnTop="true"
+          android:clickable="true"
+          android:divider="@null"
+          android:visibility="gone">
+      </ListView>
+
+      <LinearLayout
+          android:id="@+id/autofill_dataset_footer"
+          android:visibility="gone"
+          android:layout_width="fill_parent"
+          android:layout_height="wrap_content"
+          android:orientation="vertical"/>
+
+    </LinearLayout>
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/autofill_fill_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/autofill_fill_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d1a4935633cbb2ed837af6a9fba8d93c88c5ba8c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/autofill_fill_dialog.xml
@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- NOTE: outer layout is required to provide proper shadow. -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/autofill_dialog_picker"
+    android:layout_width="fill_parent"
+    android:layout_height="wrap_content"
+    android:background="@drawable/autofill_bottomsheet_background"
+    android:orientation="vertical">
+
+    <LinearLayout
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:gravity="center_horizontal"
+        android:layout_marginTop="@dimen/autofill_save_outer_top_margin"
+        android:layout_marginBottom="24dp"
+        android:layout_marginStart="24dp"
+        android:layout_marginEnd="24dp"
+        android:orientation="vertical">
+
+        <ImageView
+            android:id="@+id/autofill_service_icon"
+            android:scaleType="fitCenter"
+            android:visibility="gone"
+            android:layout_height="@dimen/autofill_dialog_icon_max_height"
+            android:layout_width="fill_parent"/>
+
+        <LinearLayout
+            android:id="@+id/autofill_dialog_header"
+            android:layout_width="fill_parent"
+            android:layout_height="wrap_content"
+            android:gravity="center_horizontal"
+            android:layout_marginTop="16dp"
+            android:paddingStart="@dimen/autofill_save_inner_padding"
+            android:paddingEnd="@dimen/autofill_save_inner_padding"
+            android:visibility="gone" />
+    </LinearLayout>
+
+    <!-- For Authentication. -->
+    <LinearLayout
+        android:id="@+id/autofill_dialog_container"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:gravity="center_horizontal"
+        android:visibility="gone"
+        android:paddingBottom="24dp"
+        android:layout_marginStart="24dp"
+        android:layout_marginEnd="24dp" />
+
+    <ListView
+        android:id="@+id/autofill_dialog_list"
+        android:layout_weight="1"
+        android:layout_width="fill_parent"
+        android:layout_height="0dp"
+        android:paddingBottom="24dp"
+        android:layout_marginStart="24dp"
+        android:layout_marginEnd="24dp"
+        android:clipToPadding="false"
+        android:drawSelectorOnTop="true"
+        android:clickable="true"
+        android:divider="@null"
+        android:visibility="gone" />
+
+    <com.android.internal.widget.ButtonBarLayout
+        android:layout_width="match_parent"
+        android:layout_height="48dp"
+        android:layout_gravity="end"
+        android:layout_marginTop="8dp"
+        android:layout_marginBottom="18dp"
+        android:layout_marginStart="24dp"
+        android:layout_marginEnd="24dp"
+        android:theme="@style/Theme.DeviceDefault.AutofillHalfScreenDialogButton"
+        android:orientation="horizontal">
+
+        <Button
+            android:id="@+id/autofill_dialog_no"
+            android:layout_width="wrap_content"
+            android:layout_height="36dp"
+            android:layout_marginTop="6dp"
+            android:layout_marginBottom="6dp"
+            style="?android:attr/borderlessButtonStyle"
+            android:text="@string/autofill_save_no">
+        </Button>
+
+        <Space
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:layout_weight="1"
+            android:visibility="invisible">
+        </Space>
+
+        <Button
+            android:id="@+id/autofill_dialog_yes"
+            android:layout_width="wrap_content"
+            android:layout_height="36dp"
+            android:layout_marginTop="6dp"
+            android:layout_marginBottom="6dp"
+            style="@style/AutofillHalfSheetTonalButton"
+            android:text="@string/autofill_save_yes"
+            android:visibility="gone" >
+        </Button>
+
+    </com.android.internal.widget.ButtonBarLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/autofill_save.xml b/android-sdk/platforms/android-34/data/res/layout/autofill_save.xml
new file mode 100644
index 0000000000000000000000000000000000000000..85529d6a4b3bee458e95c9028065a28952e716fb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/autofill_save.xml
@@ -0,0 +1,108 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- NOTE: outer layout is required to provide proper shadow. -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="fill_parent"
+    android:layout_height="wrap_content"
+    android:background="@drawable/autofill_bottomsheet_background"
+    android:orientation="vertical">
+
+    <LinearLayout
+        android:id="@+id/autofill_save"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="@dimen/autofill_save_outer_top_margin"
+        android:layout_marginStart="24dp"
+        android:layout_marginEnd="24dp"
+        android:background="?android:attr/colorSurface"
+        android:gravity="center_horizontal"
+        android:orientation="vertical">
+
+        <LinearLayout
+            android:layout_width="fill_parent"
+            android:layout_height="wrap_content"
+            android:orientation="vertical">
+
+            <ImageView
+                android:id="@+id/autofill_save_icon"
+                android:scaleType="fitCenter"
+                android:layout_gravity="center"
+                android:layout_height="@dimen/autofill_save_icon_max_height"
+                android:layout_width="fill_parent"/>
+
+            <TextView
+                android:id="@+id/autofill_save_title"
+                android:layout_width="fill_parent"
+                android:layout_height="wrap_content"
+                android:text="@string/autofill_save_title"
+                android:layout_marginTop="16dp"
+                android:paddingBottom="24dp"
+                android:gravity="center"
+                android:textAppearance="@style/AutofillSaveUiTitle">
+            </TextView>
+
+            <com.android.server.autofill.ui.CustomScrollView
+                android:id="@+id/autofill_save_custom_subtitle"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:visibility="gone"/>
+
+        </LinearLayout>
+
+        <com.android.internal.widget.ButtonBarLayout
+            android:layout_width="match_parent"
+            android:layout_height="48dp"
+            android:layout_gravity="end"
+            android:clipToPadding="false"
+            android:layout_marginTop="32dp"
+            android:layout_marginBottom="18dp"
+            android:theme="@style/Theme.DeviceDefault.AutofillHalfScreenDialogButton"
+            android:orientation="horizontal">
+
+            <Button
+                android:id="@+id/autofill_save_no"
+                android:layout_width="wrap_content"
+                android:layout_height="36dp"
+                android:layout_marginTop="6dp"
+                android:layout_marginBottom="6dp"
+                style="?android:attr/borderlessButtonStyle"
+                android:text="@string/autofill_save_no">
+            </Button>
+
+            <Space
+                android:layout_width="0dp"
+                android:layout_height="0dp"
+                android:layout_weight="1"
+                android:visibility="invisible">
+            </Space>
+
+            <Button
+                android:id="@+id/autofill_save_yes"
+                android:layout_width="wrap_content"
+                android:layout_height="36dp"
+                android:layout_marginTop="6dp"
+                android:layout_marginBottom="6dp"
+                style="@style/AutofillHalfSheetTonalButton"
+                android:text="@string/autofill_save_yes">
+            </Button>
+
+        </com.android.internal.widget.ButtonBarLayout>
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment.xml b/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9c1261813cb7f9c9a08cf8f1078ee39a220f4d87
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- This layout disables breadcrumbs in the fragment area and causes PreferenceActivity to
+    put the breadcrumbs in the action bar. -->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="0dip"
+    android:layout_height="0dip"
+    android:visibility="gone" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment_material.xml b/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..96c0144e3a50e82265794c62daa0d31601f2c953
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/breadcrumbs_in_fragment_material.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- This layout disables breadcrumbs in the fragment area and causes PreferenceActivity to
+    put the breadcrumbs in the action bar. -->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="0dip"
+    android:layout_height="0dip"
+    android:visibility="gone" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/browser_link_context_header.xml b/android-sdk/platforms/android-34/data/res/layout/browser_link_context_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..fef01b31124b946a132a7cf3dd5509be272b2630
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/browser_link_context_header.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/title"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:textColor="@color/white"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:maxLines="2"
+    android:paddingStart="10dip"
+    android:paddingEnd="10dip"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/calendar_view.xml b/android-sdk/platforms/android-34/data/res/layout/calendar_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5b32a39275a2107d4ce0f3d080f4496f54e57a51
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/calendar_view.xml
@@ -0,0 +1,99 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:fillViewport="true" >
+
+    <TextView android:id="@+android:id/month_name"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_horizontal"
+        android:paddingTop="10dip"
+        android:paddingBottom="10dip"
+        style="?android:attr/textAppearanceMedium" />
+
+    <LinearLayout android:id="@+android:id/day_names"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginBottom="6dip"
+        android:layout_marginEnd="2dip"
+        android:layout_marginStart="2dip"
+        android:gravity="center" >
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center"
+            android:visibility="gone" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+        <TextView android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="center" />
+
+    </LinearLayout>
+
+    <ImageView android:layout_width="match_parent"
+        android:layout_height="1dip"
+        android:scaleType="fitXY"
+        android:gravity="fill_horizontal"
+        android:src="?android:attr/dividerHorizontal" />
+
+    <ListView android:id="@android:id/list"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:drawSelectorOnTop="false"
+        android:cacheColorHint="@android:color/transparent"
+        android:fastScrollEnabled="false"
+        android:overScrollMode="never" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7d186359f736de48856febaf8b044f2385feea19
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout.xml
@@ -0,0 +1,82 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Keep in sync with popup_menu_item_layout.xml (which only differs in the title and shortcut
+    position). -->
+<com.android.internal.view.menu.ListMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minWidth="196dip"
+    android:orientation="vertical" >
+
+    <ImageView
+        android:id="@+id/group_divider"
+        android:layout_width="match_parent"
+        android:layout_height="1dip"
+        android:layout_marginTop="4dip"
+        android:layout_marginBottom="4dip"
+        android:background="@drawable/list_divider_material" />
+
+    <LinearLayout
+        android:id="@+id/content"
+        android:layout_width="match_parent"
+        android:layout_height="?attr/dropdownListPreferredItemHeight"
+        android:paddingEnd="16dip"
+        android:duplicateParentState="true" >
+
+        <!-- Icon will be inserted here. -->
+
+        <TextView
+            android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="16dip"
+            android:textAppearance="?attr/textAppearanceLargePopupMenu"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:textAlignment="viewStart" />
+
+        <Space
+            android:layout_width="0dip"
+            android:layout_height="1dip"
+            android:layout_weight="1"/>
+
+        <TextView
+            android:id="@+id/shortcut"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="16dip"
+            android:textAppearance="?attr/textAppearanceSmallPopupMenu"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:textAlignment="viewEnd" />
+
+        <ImageView
+            android:id="@+id/submenuarrow"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:scaleType="center"
+            android:visibility="gone" />
+
+        <!-- Checkbox, and/or radio button will be inserted here. -->
+
+    </LinearLayout>
+
+</com.android.internal.view.menu.ListMenuItemView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout_material.xml b/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..168ed78d66cad56708059f88a96aca82af948183
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/cascading_menu_item_layout_material.xml
@@ -0,0 +1,84 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2023 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Keep in sync with popup_menu_item_layout.xml (which only differs in the title and shortcut
+    position). -->
+<com.android.internal.view.menu.ListMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minWidth="112dip"
+    android:maxWidth="280dip"
+    android:orientation="vertical" >
+
+    <ImageView
+        android:id="@+id/group_divider"
+        android:layout_width="match_parent"
+        android:layout_height="1dip"
+        android:layout_marginTop="8dip"
+        android:layout_marginBottom="8dip"
+        android:background="@drawable/list_divider_material" />
+
+    <LinearLayout
+        android:id="@+id/content"
+        android:layout_width="match_parent"
+        android:layout_height="48dip"
+        android:layout_marginStart="12dip"
+        android:layout_marginEnd="12dip"
+        android:duplicateParentState="true" >
+
+        <!-- Icon will be inserted here. -->
+
+        <TextView
+            android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="6dip"
+            android:textAppearance="?attr/textAppearanceLargePopupMenu"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:textAlignment="viewStart" />
+
+        <Space
+            android:layout_width="0dip"
+            android:layout_height="1dip"
+            android:layout_weight="1"/>
+
+        <TextView
+            android:id="@+id/shortcut"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="16dip"
+            android:textAppearance="?attr/textAppearanceSmallPopupMenu"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:textAlignment="viewEnd" />
+
+        <ImageView
+            android:id="@+id/submenuarrow"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:scaleType="center"
+            android:visibility="gone" />
+
+        <!-- Checkbox, and/or radio button will be inserted here. -->
+
+    </LinearLayout>
+
+</com.android.internal.view.menu.ListMenuItemView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/character_picker.xml b/android-sdk/platforms/android-34/data/res/layout/character_picker.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3ddbbb2c32fef9a3e661a840ad94344269236bf1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/character_picker.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="horizontal"
+    android:layout_width="304dp"
+    android:layout_height="match_parent"
+    android:background="@drawable/keyboard_popup_panel_trans_background">
+
+    <GridView
+        android:id="@+id/characterPicker"
+        android:layout_width="0dp"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:padding="4dp"
+        android:verticalSpacing="8dp"
+        android:horizontalSpacing="8dp"
+        android:gravity="start"
+        android:drawSelectorOnTop="false"
+        android:numColumns="4"
+        android:columnWidth="48dp"
+        android:fadingEdge="none"
+        android:layout_gravity="center_vertical"
+        android:listSelector="#0000"
+    />
+
+    <Button
+        android:id="@+id/cancel"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="12dp"
+        android:layout_marginEnd="12dp"
+        android:background="@drawable/btn_close"
+        android:layout_gravity="center_vertical"
+    />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/character_picker_button.xml b/android-sdk/platforms/android-34/data/res/layout/character_picker_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b74e620c8bcf08dfe513059e0bf96b489d6327ea
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/character_picker_button.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<Button xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:clickable="true"
+    android:focusable="false"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:background="@drawable/btn_keyboard_key_trans"
+    android:textColor="#FFFFFFFF"
+/>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/choose_account.xml b/android-sdk/platforms/android-34/data/res/layout/choose_account.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e13dd26d1d41fcea8ce0da15cc25b53f195685fe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/choose_account.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical"
+    android:paddingStart="?attr/dialogPreferredPadding"
+    android:paddingEnd="?attr/dialogPreferredPadding">
+
+    <ListView xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@id/list"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:drawSelectorOnTop="false"
+        android:scrollbarAlwaysDrawVerticalTrack="true" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/choose_account_row.xml b/android-sdk/platforms/android-34/data/res/layout/choose_account_row.xml
new file mode 100644
index 0000000000000000000000000000000000000000..81bca213b4bbe47def19a359e95b31c0198c17b1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/choose_account_row.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:orientation="horizontal" >
+
+   <ImageView android:id="@+id/account_row_icon"
+        android:layout_width="?attr/listPreferredItemHeight"
+        android:layout_height="?attr/listPreferredItemHeight"
+        android:paddingEnd="8dip" />
+
+    <TextView xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/account_row_text"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        android:gravity="center_vertical"
+        android:minHeight="?attr/listPreferredItemHeight" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/choose_account_type.xml b/android-sdk/platforms/android-34/data/res/layout/choose_account_type.xml
new file mode 100644
index 0000000000000000000000000000000000000000..87d1ddee5e92a01e003b1ba18a8c7d0277b52113
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/choose_account_type.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+
+    <View android:layout_height="3dip"
+          android:layout_width="match_parent"
+          android:background="#323232"/>
+
+    <ListView android:id="@android:id/list"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:drawSelectorOnTop="false"
+        android:scrollbarAlwaysDrawVerticalTrack="true" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/choose_type_and_account.xml b/android-sdk/platforms/android-34/data/res/layout/choose_type_and_account.xml
new file mode 100644
index 0000000000000000000000000000000000000000..79f3f1a5d7d37d7aac1e6cd26e1f1fe5fca924dd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/choose_type_and_account.xml
@@ -0,0 +1,78 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+
+    <!-- Customizable description text -->
+    <TextView android:id="@+id/description"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start|center_vertical"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        style="@style/TextAppearance.Material.Subhead" />
+
+    <FrameLayout android:id="@+id/contentPanel"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:minHeight="48dp">
+        <ListView android:id="@id/list"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:drawSelectorOnTop="false"
+            android:layout_weight="1"
+            android:scrollbarAlwaysDrawVerticalTrack="true"
+            android:choiceMode="singleChoice" />
+    </FrameLayout>
+
+    <LinearLayout android:id="@+id/buttonPanel"
+        style="?attr/buttonBarStyle"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layoutDirection="locale"
+        android:orientation="horizontal"
+        android:paddingStart="12dp"
+        android:paddingEnd="12dp"
+        android:paddingTop="8dp"
+        android:paddingBottom="8dp"
+        android:gravity="bottom">
+        <Space
+            android:layout_width="0dp"
+            android:layout_height="0dp"
+            android:layout_weight="1"
+            android:visibility="invisible" />
+        <Button android:id="@+id/button1"
+            style="?attr/buttonBarNegativeButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:text="@android:string/no"
+            android:onClick="onCancelButtonClicked" />
+        <Button android:id="@+id/button2"
+            style="?attr/buttonBarPositiveButtonStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:text="@android:string/yes"
+            android:onClick="onOkButtonClicked" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_action_button.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_action_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2b68cccaf2917a6f5842e198115b81b99025e17e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_action_button.xml
@@ -0,0 +1,31 @@
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<Button xmlns:android="http://schemas.android.com/apk/res/android"
+    android:gravity="center_vertical|start"
+    android:paddingStart="12dp"
+    android:paddingEnd="12dp"
+    android:drawablePadding="8dp"
+    android:textColor="?android:attr/textColorPrimary"
+    android:textSize="12sp"
+    android:maxWidth="192dp"
+    android:singleLine="true"
+    android:clickable="true"
+    android:background="@drawable/chooser_action_button_bg"
+    android:drawableTint="?android:attr/textColorPrimary"
+    android:drawableTintMode="src_in"
+    style="?android:attr/borderlessButtonStyle"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_action_row.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_action_row.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ea75611241819906b74f5a61e2f25464567ed77c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_action_row.xml
@@ -0,0 +1,26 @@
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:paddingLeft="@dimen/chooser_edge_margin_normal"
+    android:paddingRight="@dimen/chooser_edge_margin_normal"
+    android:gravity="center"
+    >
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_az_label_row.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_az_label_row.xml
new file mode 100644
index 0000000000000000000000000000000000000000..baf07cec987554bab0c2c63f2e1335d607f34e91
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_az_label_row.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<ImageView xmlns:android="http://schemas.android.com/apk/res/android"
+          android:contentDescription="@string/chooser_all_apps_button_label"
+          android:src="@drawable/chooser_row_layer_list"
+          android:paddingTop="16dp"
+          android:layout_width="match_parent"
+          android:layout_height="wrap_content"
+          android:scaleType="center"
+          android:gravity="center"/>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..824136cd970aaac9016f36e2ecba0e43cf0f3a0f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_dialog.xml
@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:background="@drawable/chooser_dialog_background"
+    android:orientation="vertical"
+    android:paddingBottom="8dp"
+    android:paddingTop="8dp"
+    android:layout_width="240dp"
+    android:layout_height="wrap_content">
+
+    <LinearLayout
+        android:gravity="start|center_vertical"
+        android:paddingStart="16dp"
+        android:paddingEnd="16dp"
+        android:minHeight="56dp"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content">
+
+        <ImageView android:id="@+id/icon"
+                   android:layout_marginEnd="16dp"
+                   android:layout_width="24dp"
+                   android:layout_height="24dp"/>
+
+        <TextView android:id="@+id/title"
+                  android:textSize="16sp"
+                  android:textColor="?android:attr/textColorPrimary"
+                  android:textAppearance="@android:style/TextAppearance.DeviceDefault.WindowTitle"
+                  android:text="App name"
+                  android:lines="1"
+                  android:ellipsize="end"
+                  android:layout_width="wrap_content"
+                  android:layout_height="wrap_content"/>
+
+    </LinearLayout>
+
+    <com.android.internal.widget.RecyclerView
+        xmlns:app="http://schemas.android.com/apk/res-auto"
+        app:layoutManager="com.android.internal.widget.LinearLayoutManager"
+        android:id="@+id/listContainer"
+        android:overScrollMode="never"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"/>
+
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_dialog_item.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_dialog_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4a88bb02372e390d39c1516dae84318eec18ac7c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_dialog_item.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:background="?android:attr/selectableItemBackground"
+              android:clickable="true"
+              android:paddingStart="16dp"
+              android:paddingEnd="16dp"
+              android:orientation="horizontal"
+              android:gravity="start|center_vertical"
+              android:minHeight="56dp"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content">
+
+    <ImageView android:id="@+id/icon"
+               android:alpha="0.54"
+               android:tint="?android:attr/textColorPrimary"
+               android:layout_marginEnd="16dp"
+               android:layout_width="24dp"
+               android:layout_height="24dp"/>
+
+    <TextView android:id="@+id/text"
+              android:textAppearance="?android:attr/textAppearanceSmall"
+              android:textColor="?android:attr/textColorPrimary"
+              android:textSize="16sp"
+              android:maxLines="2"
+              android:ellipsize="end"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"/>
+
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_grid.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_grid.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b102b4bb2124d7dd29ec79c1b334a93b53b6a6a6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_grid.xml
@@ -0,0 +1,96 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2015, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_gravity="center"
+    android:maxCollapsedHeight="0dp"
+    android:maxCollapsedHeightSmall="56dp"
+    android:maxWidth="@dimen/chooser_width"
+    android:id="@id/contentPanel">
+
+    <RelativeLayout
+        android:id="@+id/chooser_header"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:elevation="0dp"
+        android:background="@drawable/bottomsheet_background">
+
+        <ImageView
+            android:id="@+id/drag"
+            android:layout_width="24dp"
+            android:layout_height="4dp"
+            android:src="@drawable/ic_drag_handle"
+            android:layout_marginTop="@dimen/chooser_edge_margin_thin"
+            android:layout_marginBottom="@dimen/chooser_edge_margin_thin"
+            android:tint="?attr/colorSurfaceVariant"
+            android:layout_centerHorizontal="true"
+            android:layout_alignParentTop="true" />
+
+        <TextView android:id="@+id/title"
+                  android:layout_height="wrap_content"
+                  android:layout_width="wrap_content"
+                  android:textAppearance="@style/TextAppearance.DeviceDefault.WindowTitle"
+                  android:gravity="center"
+                  android:paddingBottom="@dimen/chooser_view_spacing"
+                  android:paddingLeft="24dp"
+                  android:paddingRight="24dp"
+                  android:visibility="gone"
+                  android:layout_below="@id/drag"
+                  android:layout_centerHorizontal="true"/>
+    </RelativeLayout>
+
+    <FrameLayout
+        android:id="@+id/content_preview_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:visibility="gone" />
+
+    <TabHost
+        android:id="@+id/profile_tabhost"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentTop="true"
+        android:layout_centerHorizontal="true"
+        android:background="?attr/colorBackground">
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content">
+            <TabWidget
+                android:id="@android:id/tabs"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:visibility="gone">
+            </TabWidget>
+            <FrameLayout
+                android:id="@android:id/tabcontent"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+                <com.android.internal.app.ResolverViewPager
+                    android:id="@+id/profile_pager"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"/>
+            </FrameLayout>
+        </LinearLayout>
+    </TabHost>
+
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_file.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_file.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d8c1d1782834d54c4ac5c47dbee23d17242119e8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_file.xml
@@ -0,0 +1,79 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2019, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<!-- Layout Option: File preview, icon, filename, copy-->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/content_preview_file_area"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:paddingBottom="@dimen/chooser_view_spacing"
+    android:background="?attr/colorBackground">
+
+  <LinearLayout
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_gravity="center"
+      android:orientation="horizontal"
+      android:paddingLeft="@dimen/chooser_edge_margin_normal"
+      android:paddingRight="@dimen/chooser_edge_margin_normal"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:id="@+id/content_preview_file_layout">
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_file_thumbnail"
+          android:layout_width="75dp"
+          android:layout_height="75dp"
+          android:layout_marginRight="16dp"
+          android:adjustViewBounds="true"
+          android:layout_gravity="center_vertical"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+    <ImageView
+        android:id="@+id/content_preview_file_icon"
+        android:layout_width="36dp"
+        android:layout_height="36dp"
+        android:layout_marginRight="16dp"
+        android:adjustViewBounds="true"
+        android:layout_gravity="center_vertical"
+        android:gravity="center"
+        android:scaleType="fitCenter"
+        android:visibility="gone"/>
+    <TextView
+        android:id="@+id/content_preview_filename"
+        android:layout_width="0dp"
+        android:layout_weight="1"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:ellipsize="middle"
+        android:gravity="start|top"
+        android:paddingRight="24dp"
+        android:singleLine="true"/>
+  </LinearLayout>
+
+  <include
+      android:id="@+id/chooser_action_row"
+      layout="@layout/chooser_action_row"
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:layout_gravity="center"
+  />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_image.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_image.xml
new file mode 100644
index 0000000000000000000000000000000000000000..52692b03a44df611ca243064793d81ba1648cafe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_image.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2019, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<!-- Layout Option: Supporting up to 3 images for preview -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:background="?attr/colorBackground">
+  <RelativeLayout
+      android:id="@+id/content_preview_image_area"
+      android:layout_width="wrap_content"
+      android:layout_height="wrap_content"
+      android:layout_gravity="center_horizontal"
+      android:paddingBottom="@dimen/chooser_view_spacing"
+      android:background="?attr/colorBackground">
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_image_1_large"
+          android:layout_width="120dp"
+          android:layout_height="104dp"
+          android:layout_alignParentTop="true"
+          android:adjustViewBounds="true"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_image_2_large"
+          android:visibility="gone"
+          android:layout_width="120dp"
+          android:layout_height="104dp"
+          android:layout_alignParentTop="true"
+          android:layout_toRightOf="@id/content_preview_image_1_large"
+          android:layout_marginLeft="10dp"
+          android:adjustViewBounds="true"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_image_2_small"
+          android:visibility="gone"
+          android:layout_width="120dp"
+          android:layout_height="65dp"
+          android:layout_alignParentTop="true"
+          android:layout_toRightOf="@id/content_preview_image_1_large"
+          android:layout_marginLeft="10dp"
+          android:adjustViewBounds="true"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_image_3_small"
+          android:visibility="gone"
+          android:layout_width="120dp"
+          android:layout_height="65dp"
+          android:layout_below="@id/content_preview_image_2_small"
+          android:layout_toRightOf="@id/content_preview_image_1_large"
+          android:layout_marginLeft="10dp"
+          android:layout_marginTop="10dp"
+          android:adjustViewBounds="true"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+
+  </RelativeLayout>
+
+  <include
+      android:id="@+id/chooser_action_row"
+      layout="@layout/chooser_action_row"
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:layout_gravity="center"
+  />
+
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_text.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bc4f327d7a15d6c63065c651155501a83e9025b1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_grid_preview_text.xml
@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2019, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<!-- Layout Option: Text preview, with optional title and thumbnail -->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/content_preview_text_area"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:background="?android:attr/colorBackground">
+
+  <RelativeLayout
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_gravity="center"
+      android:orientation="horizontal"
+      android:paddingLeft="@dimen/chooser_edge_margin_normal"
+      android:paddingRight="@dimen/chooser_edge_margin_normal"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:id="@+id/content_preview_text_layout">
+
+    <TextView
+        android:id="@+id/content_preview_text"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentStart="true"
+        android:layout_centerVertical="true"
+        android:ellipsize="end"
+        android:fontFamily="@android:string/config_headlineFontFamily"
+        android:textColor="?android:attr/textColorPrimary"
+        android:textAlignment="gravity"
+        android:textDirection="locale"
+        android:maxLines="2"
+        android:focusable="true"/>
+
+  </RelativeLayout>
+
+  <include
+      android:id="@+id/chooser_action_row"
+      layout="@layout/chooser_action_row"
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:layout_gravity="center"
+      />
+
+  <!-- Required sub-layout so we can get the nice rounded corners-->
+  <!-- around this section -->
+  <LinearLayout
+      android:layout_width="@dimen/chooser_preview_width"
+      android:layout_height="wrap_content"
+      android:layout_gravity="center"
+      android:orientation="horizontal"
+      android:layout_marginLeft="@dimen/chooser_edge_margin_normal"
+      android:layout_marginRight="@dimen/chooser_edge_margin_normal"
+      android:layout_marginBottom="@dimen/chooser_view_spacing"
+      android:minHeight="80dp"
+      android:background="@drawable/chooser_content_preview_rounded"
+      android:id="@+id/content_preview_title_layout">
+
+    <view class="com.android.internal.app.ChooserActivity$RoundedRectImageView"
+          android:id="@+id/content_preview_thumbnail"
+          android:layout_width="75dp"
+          android:layout_height="75dp"
+          android:layout_marginRight="16dp"
+          android:adjustViewBounds="true"
+          android:layout_gravity="center_vertical"
+          android:gravity="center"
+          android:scaleType="centerCrop"/>
+
+    <TextView
+        android:id="@+id/content_preview_title"
+        android:layout_width="0dp"
+        android:layout_weight="1"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:ellipsize="end"
+        android:maxLines="2"
+        android:textAlignment="gravity"
+        android:textDirection="locale"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.WindowTitle"
+        android:fontFamily="@android:string/config_headlineFontFamily"/>
+  </LinearLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_list_per_profile.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_list_per_profile.xml
new file mode 100644
index 0000000000000000000000000000000000000000..912173cc725b1e3dc84078153d6449938b42a040
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_list_per_profile.xml
@@ -0,0 +1,32 @@
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+    <com.android.internal.widget.RecyclerView
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:layoutManager="com.android.internal.app.ChooserGridLayoutManager"
+        android:id="@+id/resolver_list"
+        android:clipToPadding="false"
+        android:background="?attr/colorBackground"
+        android:scrollbars="none"
+        android:elevation="1dp"
+        android:nestedScrollingEnabled="true" />
+
+    <include layout="@layout/resolver_empty_states" />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_profile_row.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_profile_row.xml
new file mode 100644
index 0000000000000000000000000000000000000000..fe4f9496be30b664d46f4adb3744b04d666ae523
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_profile_row.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2019, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:gravity="center">
+  <Button
+      android:id="@+id/profile_button"
+      android:layout_width="wrap_content"
+      android:layout_height="48dp"
+      style="?attr/borderlessButtonStyle"
+      android:textAppearance="?attr/textAppearanceButton"
+      android:textColor="?attr/colorAccent"
+      android:singleLine="true"/>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_row.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_row.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f5814c3251f6ca87a9834ef954f9b4f03de2931c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_row.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:orientation="horizontal"
+              android:layout_width="match_parent"
+              android:layout_height="100dp"
+              android:gravity="start|top">
+  <TextView
+      android:id="@+id/chooser_row_text_option"
+      android:layout_width="match_parent"
+      android:layout_height="wrap_content"
+      android:gravity="center"
+      android:layout_gravity="center"
+      android:visibility="gone" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/chooser_row_direct_share.xml b/android-sdk/platforms/android-34/data/res/layout/chooser_row_direct_share.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d7e36eedfe92ebdaec9ceab7996c1f92eb974f79
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/chooser_row_direct_share.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2019, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+                android:orientation="vertical"
+                android:layout_width="match_parent"
+                android:layout_height="200dp">
+
+</LinearLayout>
+
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/common_tab_settings.xml b/android-sdk/platforms/android-34/data/res/layout/common_tab_settings.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d2a4acc29513bfe303ec194fc94254665d1c64d7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/common_tab_settings.xml
@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TabHost xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/tabhost"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+
+    <LinearLayout
+        android:id="@+id/tabs_container"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:orientation="vertical">
+
+        <HorizontalScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:scrollbars="none"
+            android:fillViewport="true">
+
+            <TabWidget
+                android:id="@android:id/tabs"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                style="?android:attr/tabWidgetStyle" />
+
+        </HorizontalScrollView>
+
+        <!-- give an empty content area to make tabhost happy -->
+        <FrameLayout
+            android:id="@android:id/tabcontent"
+            android:layout_width="0dip"
+            android:layout_height="0dip" />
+
+        <ListView
+            android:id="@android:id/list"
+            android:layout_width="match_parent"
+            android:layout_height="0dip"
+            android:layout_weight="1"
+            android:clipChildren="false"
+            android:clipToPadding="false"
+            android:smoothScrollbar="false" />
+
+    </LinearLayout>
+
+</TabHost>
diff --git a/android-sdk/platforms/android-34/data/res/layout/conversation_face_pile_layout.xml b/android-sdk/platforms/android-34/data/res/layout/conversation_face_pile_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..95c14d7c6b5a5b8da97de8cff15963212fa14871
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/conversation_face_pile_layout.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations underthe License
+  -->
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/conversation_face_pile"
+    android:layout_width="@dimen/conversation_avatar_size"
+    android:layout_height="@dimen/conversation_avatar_size"
+    android:forceHasOverlappingRendering="false"
+    >
+    <ImageView
+        android:id="@+id/conversation_face_pile_top"
+        android:layout_width="@dimen/messaging_avatar_size"
+        android:layout_height="@dimen/messaging_avatar_size"
+        android:scaleType="centerCrop"
+        android:layout_gravity="end|top"
+        />
+    <FrameLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start|bottom">
+        <ImageView
+            android:id="@+id/conversation_face_pile_bottom_background"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:src="@drawable/conversation_badge_background"
+            />
+        <ImageView
+            android:id="@+id/conversation_face_pile_bottom"
+            android:layout_width="@dimen/messaging_avatar_size"
+            android:layout_height="@dimen/messaging_avatar_size"
+            android:scaleType="centerCrop"
+            android:layout_gravity="center"
+            />
+    </FrameLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..32a7360b3c3bf399bb58cd37065a061fac442366
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_dialog.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<DatePicker xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/datePicker"
+    android:layout_gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:spinnersShown="true"
+    android:calendarViewShown="false"
+    android:dialogMode="true" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_header_material.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_header_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..81f08fd9a748d047253f476b45b5fbbff8c63239
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_header_material.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:id="@+id/date_picker_header"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:orientation="vertical">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingTop="16dp"
+        android:paddingBottom="18dp"
+        android:orientation="vertical"
+        android:clipToPadding="false"
+        android:clipChildren="false">
+
+        <TextView
+            android:id="@+id/date_picker_header_year"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:focusable="true"
+            android:includeFontPadding="false"
+            android:layout_marginStart="-8dp"
+            android:layout_marginEnd="-8dp"
+            android:layout_marginTop="-8dp"
+            android:layout_marginBottom="-8dp"
+            android:padding="8dp"
+            android:background="?attr/selectableItemBackground"
+            android:textAppearance="@style/TextAppearance.Material.DatePicker.YearLabel"
+            android:pointerIcon="hand"
+            android:nextFocusForward="@+id/prev" />
+
+        <TextView
+            android:id="@+id/date_picker_header_date"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="@style/TextAppearance.Material.DatePicker.DateLabel"
+            android:includeFontPadding="false"
+            android:gravity="start"
+            android:maxLines="@integer/date_picker_header_max_lines_material"
+            android:pointerIcon="hand"
+            android:ellipsize="none" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy.xml
new file mode 100644
index 0000000000000000000000000000000000000000..303ab307a60b32f893d9d31bffa6cabe2059a256
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- Layout of date picker-->
+
+<!-- Warning: everything within the "pickers" layout is removed and re-ordered
+     depending on the date format selected by the user.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="fill_parent"
+    android:layout_height="fill_parent"
+    android:layout_gravity="center_horizontal"
+    android:orientation="horizontal"
+    android:gravity="center">
+
+    <LinearLayout android:id="@+id/pickers"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="horizontal"
+        android:gravity="center">
+
+        <!-- Month -->
+        <NumberPicker
+            android:id="@+id/month"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="1dip"
+            android:layout_marginEnd="1dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- Day -->
+        <NumberPicker
+            android:id="@+id/day"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="1dip"
+            android:layout_marginEnd="1dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- Year -->
+        <NumberPicker
+            android:id="@+id/year"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="1dip"
+            android:layout_marginEnd="1dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+    </LinearLayout>
+
+    <!-- calendar view -->
+    <CalendarView
+        android:id="@+id/calendar_view"
+        android:layout_width="245dip"
+        android:layout_height="280dip"
+        android:layout_marginStart="44dip"
+        android:layout_weight="1"
+        android:focusable="true"
+        android:focusableInTouchMode="true"
+        android:visibility="gone"
+        />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy_holo.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a6e93c99160df0052dde7f075a11674d29b3af28
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_legacy_holo.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- Layout of date picker-->
+
+<!-- Warning: everything within the "pickers" layout is removed and re-ordered
+     depending on the date format selected by the user.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center_horizontal"
+    android:orientation="horizontal"
+    android:gravity="center">
+
+    <LinearLayout android:id="@+id/pickers"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="horizontal"
+        android:gravity="center">
+
+        <!-- Month -->
+        <NumberPicker
+            android:id="@+id/month"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/picker_top_margin"
+            android:layout_marginBottom="@dimen/picker_bottom_margin"
+            android:layout_marginStart="8dip"
+            android:layout_marginEnd="8dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- Day -->
+        <NumberPicker
+            android:id="@+id/day"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/picker_top_margin"
+            android:layout_marginBottom="@dimen/picker_bottom_margin"
+            android:layout_marginStart="8dip"
+            android:layout_marginEnd="8dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- Year -->
+        <NumberPicker
+            android:id="@+id/year"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/picker_top_margin"
+            android:layout_marginBottom="@dimen/picker_bottom_margin"
+            android:layout_marginStart="8dip"
+            android:layout_marginEnd="16dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+    </LinearLayout>
+
+    <!-- calendar view -->
+    <CalendarView
+        android:id="@+id/calendar_view"
+        android:layout_width="245dip"
+        android:layout_height="280dip"
+        android:layout_marginStart="16dip"
+        android:layout_marginEnd="16dip"
+        android:layout_weight="1"
+        android:focusable="true"
+        android:focusableInTouchMode="true"
+        />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_material.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..dd8a45d26172c452e24426900d9d18a4c9da59f8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_material.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:orientation="vertical">
+
+    <include
+        layout="@layout/date_picker_header_material"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content" />
+
+    <ScrollView
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:fadeScrollbars="false"
+        android:scrollIndicators="top|bottom">
+        <include
+            layout="@layout/date_picker_view_animator_material"
+            android:layout_width="match_parent"
+            android:layout_height="0dp"
+            android:layout_weight="1" />
+    </ScrollView>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_month_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_month_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..52f7b8e1a9be00453cb32a44f20c3def3b2457da
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_month_item_material.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<android.widget.SimpleMonthView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/month_view"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:paddingStart="@dimen/day_picker_padding_horizontal"
+    android:paddingEnd="@dimen/day_picker_padding_horizontal"
+    android:paddingTop="@dimen/day_picker_padding_top"
+    android:focusable="true"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/date_picker_view_animator_material.xml b/android-sdk/platforms/android-34/data/res/layout/date_picker_view_animator_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..04647b1835edd644e0d5a050302e9b1b1cc6e9d9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/date_picker_view_animator_material.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.widget.DialogViewAnimator xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/animator"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="center"
+    android:inAnimation="@anim/date_picker_fade_in_material"
+    android:outAnimation="@anim/date_picker_fade_out_material"
+    android:measureAllChildren="true">
+
+    <android.widget.DayPickerView
+        android:id="@+id/date_picker_day_picker"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <android.widget.YearPickerView
+        android:id="@+id/date_picker_year_picker"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:scrollIndicators="bottom" />
+
+</com.android.internal.widget.DialogViewAnimator>
diff --git a/android-sdk/platforms/android-34/data/res/layout/day_picker_content_material.xml b/android-sdk/platforms/android-34/data/res/layout/day_picker_content_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d77e8dc995d2eb740bbeb1eace63fa4d535052e0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/day_picker_content_material.xml
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+             android:layout_width="match_parent"
+             android:layout_height="match_parent">
+
+    <android.widget.DayPickerViewPager
+        android:id="@+id/day_picker_view_pager"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent" />
+
+    <ImageButton
+        android:id="@+id/prev"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:minWidth="48dp"
+        android:minHeight="48dp"
+        android:src="@drawable/ic_chevron_start"
+        android:background="?attr/selectableItemBackgroundBorderless"
+        android:contentDescription="@string/date_picker_prev_month_button"
+        android:visibility="invisible"
+        android:nextFocusForward="@+id/next"
+        android:nextFocusDown="@+id/month_view" />
+
+    <ImageButton
+        android:id="@+id/next"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:minWidth="48dp"
+        android:minHeight="48dp"
+        android:src="@drawable/ic_chevron_end"
+        android:background="?attr/selectableItemBackgroundBorderless"
+        android:contentDescription="@string/date_picker_next_month_button"
+        android:visibility="invisible"
+        android:nextFocusForward="@+id/month_view"
+        android:nextFocusDown="@+id/month_view"/>
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/decor_caption.xml b/android-sdk/platforms/android-34/data/res/layout/decor_caption.xml
new file mode 100644
index 0000000000000000000000000000000000000000..02467369825dc562ecea57a1e714a348b147d601
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/decor_caption.xml
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<com.android.internal.widget.DecorCaptionView xmlns:android="http://schemas.android.com/apk/res/android"
+        android:orientation="vertical"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:descendantFocusability="beforeDescendants" >
+    <LinearLayout
+            android:id="@+id/caption"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:gravity="end"
+            android:background="@drawable/decor_caption_title"
+            android:focusable="false"
+            android:descendantFocusability="blocksDescendants" >
+        <Button
+                android:id="@+id/maximize_window"
+                android:layout_width="32dp"
+                android:layout_height="32dp"
+                android:layout_margin="5dp"
+                android:padding="4dp"
+                android:layout_gravity="center_vertical|end"
+                android:contentDescription="@string/maximize_button_text"
+                android:background="@drawable/decor_maximize_button_dark" />
+        <Button
+                android:id="@+id/close_window"
+                android:layout_width="32dp"
+                android:layout_height="32dp"
+                android:layout_margin="5dp"
+                android:padding="4dp"
+                android:layout_gravity="center_vertical|end"
+                android:contentDescription="@string/close_button_text"
+                android:background="@drawable/decor_close_button_dark" />
+    </LinearLayout>
+</com.android.internal.widget.DecorCaptionView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/default_navigation.xml b/android-sdk/platforms/android-34/data/res/layout/default_navigation.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b216ded192e45c1464b9d8b579ebf403c6462f53
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/default_navigation.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2012, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/keyguard_click_area"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:gravity="center">
+
+    <!-- message area for security screen -->
+    <TextView
+        android:id="@+id/keyguard_message_area"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start"
+        android:ellipsize="marquee"
+        android:layout_marginEnd="4dip"
+        android:layout_marginStart="4dip"
+        android:textSize="22dip"
+        android:textAppearance="?android:attr/textAppearanceMedium"/>
+
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2dda5e512218be517457a227636327d1a85c23dd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is a custom layout for a dialog.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:orientation="vertical" 
+    android:fitsSystemWindows="true">
+    <FrameLayout android:id="@android:id/title_container" 
+        android:layout_width="match_parent" 
+        android:layout_height="24dip"
+        android:layout_weight="0"
+        style="?android:attr/windowTitleBackgroundStyle">
+    </FrameLayout>
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:paddingTop="6dip"
+            android:paddingBottom="10dip"
+            android:paddingStart="10dip"
+            android:paddingEnd="10dip" />
+    </FrameLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_holo.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f8a2bf7509cdf5a4489278d06320f72a7fe88abe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_holo.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is a custom layout for a dialog.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <FrameLayout android:id="@android:id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="@dimen/alert_dialog_title_height"
+        android:layout_weight="0"
+        android:gravity="center_vertical|start"
+        style="?android:attr/windowTitleBackgroundStyle">
+    </FrameLayout>
+    <View android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="2dip"
+            android:background="@android:color/holo_blue_light" />
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_material.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..50ed9103eb7dd83fc589b424a6344566365d214b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_custom_title_material.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is a custom layout for a dialog.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <FrameLayout android:id="@android:id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="?attr/windowTitleSize"
+        android:layout_weight="0"
+        android:gravity="center_vertical|start"
+        style="?attr/windowTitleBackgroundStyle" />
+    <View android:layout_width="match_parent"
+        android:layout_height="0dp" />
+    <FrameLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?attr/windowContentOverlay">
+        <FrameLayout android:id="@id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..40eb3851d41d07333e57fb4e9d1d4947b50baa94
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/dialog_title.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:orientation="vertical" 
+    android:fitsSystemWindows="true">
+    <TextView android:id="@android:id/title" style="?android:attr/windowTitleStyle"
+        android:layout_width="match_parent" 
+        android:layout_height="wrap_content"
+        android:minHeight="53dip"
+        android:paddingTop="9dip"
+        android:paddingBottom="9dip"
+        android:paddingStart="10dip"
+        android:paddingEnd="10dip" />
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title_holo.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0a692ee61c9492af97ec2f614dcc2ad75e00d4ad
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title_holo.xml
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <TextView android:id="@android:id/title" style="?android:attr/windowTitleStyle"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="@android:dimen/alert_dialog_title_height"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip"
+        android:gravity="center_vertical|start" />
+    <View android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="2dip"
+            android:background="@android:color/holo_blue_light" />
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a86a76c5f8c10ec9ff9fbe449f6007f152ed95f0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons.xml
@@ -0,0 +1,69 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:orientation="vertical" 
+    android:fitsSystemWindows="true">
+    
+    <LinearLayout android:id="@+id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:gravity="center_vertical"
+        android:minHeight="53dip"
+        android:paddingTop="6dip"
+        android:paddingBottom="9dip"
+        android:paddingStart="10dip"
+        android:paddingEnd="10dip">
+        <ImageView android:id="@+id/left_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_marginTop="6dip"
+            android:layout_gravity="top"
+            android:scaleType="fitCenter" />
+        <TextView android:id="@android:id/title"
+        	style="?android:attr/windowTitleStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_weight="0"
+            android:paddingTop="2dip"
+            android:paddingBottom="1dip"
+            android:paddingStart="14dip"
+            android:paddingEnd="14dip" />
+        <ImageView android:id="@+id/right_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:layout_marginTop="6dip"
+            android:layout_gravity="top"
+            android:scaleType="fitCenter" />
+    </LinearLayout>
+    
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_holo.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e3d771cbf2be2fc68f57277201543e4ad1de8e6f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_holo.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+
+    <LinearLayout android:id="@+id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:gravity="center_vertical"
+        android:minHeight="@android:dimen/alert_dialog_title_height"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip">
+        <ImageView android:id="@+id/left_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:scaleType="fitCenter"
+            android:layout_marginEnd="8dip" />
+        <TextView android:id="@android:id/title"
+            style="?android:attr/windowTitleStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_weight="0" />
+        <ImageView android:id="@+id/right_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:scaleType="fitCenter"
+            android:layout_marginStart="8dip" />
+    </LinearLayout>
+
+    <View android:id="@+id/titleDivider"
+            android:layout_width="match_parent"
+            android:layout_height="1dip"
+            android:background="@android:color/holo_blue_light" />
+
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?android:attr/windowContentOverlay">
+        <FrameLayout android:id="@android:id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_material.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3866ca767a16856ed9847273fc76a8ae430dd9fe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title_icons_material.xml
@@ -0,0 +1,63 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+
+    <LinearLayout android:id="@+id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:gravity="center_vertical"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingTop="?attr/dialogPreferredPadding">
+        <ImageView android:id="@+id/left_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:scaleType="fitCenter"
+            android:layout_marginEnd="8dip" />
+        <TextView android:id="@id/title"
+            style="?attr/windowTitleStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_weight="0" />
+        <ImageView android:id="@+id/right_icon"
+            android:layout_width="32dip"
+            android:layout_height="32dip"
+            android:scaleType="fitCenter"
+            android:layout_marginStart="8dip" />
+    </LinearLayout>
+
+    <View android:layout_width="match_parent"
+        android:layout_height="0dp" />
+
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?attr/windowContentOverlay">
+        <FrameLayout android:id="@id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/dialog_title_material.xml b/android-sdk/platforms/android-34/data/res/layout/dialog_title_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1ea7f6e03fbcdd3ebfe6a43aad1a8a5224fdfce5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/dialog_title_material.xml
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <TextView android:id="@+id/title"
+        style="?android:attr/windowTitleStyle"
+        android:singleLine="true"
+        android:ellipsize="end"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:textAlignment="viewStart"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material" />
+    <View android:layout_width="match_parent"
+        android:layout_height="0dp" />
+    <FrameLayout
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:foreground="?attr/windowContentOverlay">
+        <FrameLayout android:id="@id/content"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/expandable_list_content.xml b/android-sdk/platforms/android-34/data/res/layout/expandable_list_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4ed905ccc6e987cc4cf19b43d3a2d9497ee36705
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/expandable_list_content.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/expandable_list_content.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<ExpandableListView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/list"
+    android:layout_width="match_parent" 
+    android:layout_height="match_parent"
+    android:drawSelectorOnTop="false" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/expanded_menu_layout.xml b/android-sdk/platforms/android-34/data/res/layout/expanded_menu_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f44a83ffa59d3a5e2ba2ca2a30e6684c70746d07
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/expanded_menu_layout.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.ExpandedMenuView xmlns:android="http://schemas.android.com/apk/res/android"
+	android:id="@+android:id/expanded_menu" 
+	android:layout_width="?android:attr/panelMenuListWidth"
+	android:layout_height="wrap_content" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/floating_popup_close_overflow_button.xml b/android-sdk/platforms/android-34/data/res/layout/floating_popup_close_overflow_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4dae1aeb7ffed6924ded913167c1097fab646e59
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/floating_popup_close_overflow_button.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<ImageButton xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="@dimen/floating_toolbar_menu_button_minimum_width"
+    android:layout_height="match_parent"
+    android:minWidth="@dimen/floating_toolbar_menu_button_minimum_width"
+    android:minHeight="@dimen/floating_toolbar_height"
+    android:src="?attr/floatingToolbarCloseDrawable"
+    android:contentDescription="@string/floating_toolbar_close_overflow_description"
+    android:background="?attr/floatingToolbarItemBackgroundBorderlessDrawable" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/floating_popup_container.xml b/android-sdk/platforms/android-34/data/res/layout/floating_popup_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..776a35d15ef0aeb4d10301d42a3cef4e565a6fa8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/floating_popup_container.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/floating_popup_container"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:padding="0dp"
+    android:layout_margin="@android:dimen/text_edit_floating_toolbar_margin"
+    android:elevation="@android:dimen/text_edit_floating_toolbar_elevation"
+    android:focusable="true"
+    android:focusableInTouchMode="true"
+    android:background="?attr/floatingToolbarPopupBackgroundDrawable"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/floating_popup_menu_button.xml b/android-sdk/platforms/android-34/data/res/layout/floating_popup_menu_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e4c2a34b1af8f04a89754a10e9e45872879cc176
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/floating_popup_menu_button.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:minWidth="@dimen/floating_toolbar_menu_button_minimum_width"
+    android:minHeight="@dimen/floating_toolbar_height"
+    android:paddingStart="@dimen/floating_toolbar_menu_button_side_padding"
+    android:paddingEnd="@dimen/floating_toolbar_menu_button_side_padding"
+    android:paddingTop="0dp"
+    android:paddingBottom="0dp"
+    android:background="?attr/floatingToolbarItemBackgroundDrawable">
+    <ImageView
+        android:id="@+id/floating_toolbar_menu_item_image"
+        android:layout_width="@dimen/floating_toolbar_menu_image_width"
+        android:layout_height="@dimen/floating_toolbar_height"
+        android:paddingTop="@dimen/floating_toolbar_menu_image_button_vertical_padding"
+        android:paddingStart="0dp"
+        android:paddingBottom="@dimen/floating_toolbar_menu_image_button_vertical_padding"
+        android:paddingEnd="0dp"
+        android:layout_margin="0dp"
+        android:scaleType="centerInside"
+        android:background="@null"
+        android:focusable="false"
+        android:focusableInTouchMode="false"
+        android:importantForAccessibility="no" />
+    <TextView
+        android:id="@+id/floating_toolbar_menu_item_text"
+        android:layout_width="wrap_content"
+        android:layout_height="@dimen/floating_toolbar_height"
+        android:textAppearance="?android:attr/textAppearanceListItemSmall"
+        android:padding="0dp"
+        android:paddingStart="@dimen/floating_toolbar_menu_button_side_padding"
+        android:layout_margin="0dp"
+        android:gravity="center"
+        android:singleLine="true"
+        android:ellipsize="end"
+        android:fontFamily="@*android:string/config_bodyFontFamily"
+        android:textSize="@dimen/floating_toolbar_text_size"
+        android:textColor="?attr/floatingToolbarForegroundColor"
+        android:background="@null"
+        android:focusable="false"
+        android:focusableInTouchMode="false"
+        android:importantForAccessibility="no" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/floating_popup_open_overflow_button.xml b/android-sdk/platforms/android-34/data/res/layout/floating_popup_open_overflow_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f6a3e8d3fbc1534ad473f6c0b24fd1e1c635ae0f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/floating_popup_open_overflow_button.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<ImageButton xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="@dimen/floating_toolbar_menu_button_minimum_width"
+    android:layout_height="match_parent"
+    android:minWidth="@dimen/floating_toolbar_menu_button_minimum_width"
+    android:minHeight="@dimen/floating_toolbar_height"
+    android:paddingStart="0dp"
+    android:paddingTop="0dp"
+    android:paddingBottom="0dp"
+    android:paddingEnd="4dp"
+    android:src="?attr/floatingToolbarOpenDrawable"
+    android:contentDescription="@string/floating_toolbar_open_overflow_description"
+    android:background="?attr/floatingToolbarItemBackgroundBorderlessDrawable" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/floating_popup_overflow_button.xml b/android-sdk/platforms/android-34/data/res/layout/floating_popup_overflow_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..12e2000882865745052d06a83bfa7b1c84ffce70
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/floating_popup_overflow_button.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2015, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<ImageButton xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/overflow"
+    android:layout_width="@dimen/floating_toolbar_menu_image_button_width"
+    android:layout_height="@dimen/floating_toolbar_height"
+    android:paddingStart="@dimen/floating_toolbar_menu_button_side_padding"
+    android:paddingTop="@dimen/floating_toolbar_menu_image_button_vertical_padding"
+    android:paddingEnd="@dimen/floating_toolbar_menu_button_side_padding"
+    android:paddingBottom="@dimen/floating_toolbar_menu_image_button_vertical_padding"
+    android:scaleType="centerInside"
+    android:background="?attr/actionBarItemBackground"
+    android:tint="?attr/floatingToolbarForegroundColor" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item.xml b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ee4344f25cd334feebe6bbd3a695fa351fe79eba
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:orientation="horizontal"
+        >
+    <ImageView
+            android:id="@android:id/left_icon"
+            android:src="?attr/dividerVertical"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:scaleType="fitXY"
+            android:layout_marginTop="12dip"
+            android:layout_marginBottom="12dip"
+        />
+
+    <TextView
+            android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:paddingStart="8dip"
+            android:paddingEnd="8dip"
+            android:gravity="center_vertical"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:background="?android:attr/selectableItemBackground"
+            />
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ee4344f25cd334feebe6bbd3a695fa351fe79eba
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumb_item_material.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:orientation="horizontal"
+        >
+    <ImageView
+            android:id="@android:id/left_icon"
+            android:src="?attr/dividerVertical"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:scaleType="fitXY"
+            android:layout_marginTop="12dip"
+            android:layout_marginBottom="12dip"
+        />
+
+    <TextView
+            android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:paddingStart="8dip"
+            android:paddingEnd="8dip"
+            android:gravity="center_vertical"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:background="?android:attr/selectableItemBackground"
+            />
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumbs.xml b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumbs.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f289e14541f6334eb6f58c090bf1d27d062427f9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/fragment_bread_crumbs.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:orientation="horizontal"
+        android:gravity="center_vertical"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent">
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/global_actions_item.xml b/android-sdk/platforms/android-34/data/res/layout/global_actions_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6ac0b1756234bece4d6ebb7c2adacd14834ca4fa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/global_actions_item.xml
@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- Used with LegacyGlobalActions. -->
+
+<!-- RelativeLayouts have an issue enforcing minimum heights, so just
+     work around this for now with LinearLayouts. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:orientation="horizontal"
+    android:paddingStart="8dip"
+    android:paddingEnd="16dip"
+    android:paddingTop="6dip"
+    android:paddingBottom="6dip"
+    >
+    <ImageView android:id="@+id/icon"
+        android:layout_width="56dp"
+        android:layout_height="56dp"
+        android:layout_gravity="center"
+        android:layout_marginEnd="8dip"
+        android:scaleType="center"/>
+
+    <LinearLayout
+        android:orientation="vertical"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:layout_marginEnd="8dip"
+        >
+        <TextView android:id="@+id/message"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="top|start"
+            android:gravity="center_vertical|start"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            />
+        <TextView android:id="@+id/status"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="bottom|start"
+            android:minHeight="26dp"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            />
+    </LinearLayout>
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/global_actions_silent_mode.xml b/android-sdk/platforms/android-34/data/res/layout/global_actions_silent_mode.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a3586232a15279c50a53cfd85467ee1c2cc7a4fa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/global_actions_silent_mode.xml
@@ -0,0 +1,103 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:orientation="horizontal"
+    >
+
+    <LinearLayout
+        android:id="@+id/option1"
+        android:layout_width="64dp"
+        android:layout_height="match_parent"
+        android:background="?android:attr/actionBarItemBackground"
+        android:contentDescription="@string/silent_mode_silent"
+        android:focusable="true"
+        >
+        <ImageView
+            android:layout_width="48dp"
+            android:layout_height="match_parent"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:layout_marginEnd="8dp"
+            android:layout_marginTop="6dp"
+            android:layout_marginBottom="6dp"
+            android:src="@drawable/ic_audio_ring_notif_mute"
+            android:scaleType="center"
+            android:duplicateParentState="true"
+            android:background="@drawable/silent_mode_indicator"
+            />
+    </LinearLayout>
+    <!-- Spacer -->
+    <View android:layout_width="0dp"
+        android:layout_height="match_parent"
+        android:layout_weight="1"
+        android:visibility="invisible"/>
+
+    <LinearLayout
+        android:id="@+id/option2"
+        android:layout_width="64dp"
+        android:layout_height="match_parent"
+        android:background="?android:attr/actionBarItemBackground"
+        android:contentDescription="@string/silent_mode_vibrate"
+        android:focusable="true"
+        >
+        <ImageView
+            android:layout_width="48dp"
+            android:layout_height="match_parent"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:layout_marginEnd="8dp"
+            android:layout_marginTop="6dp"
+            android:layout_marginBottom="6dp"
+            android:src="@drawable/ic_audio_ring_notif_vibrate"
+            android:scaleType="center"
+            android:duplicateParentState="true"
+            android:background="@drawable/silent_mode_indicator"
+            />
+    </LinearLayout>
+
+    <!-- Spacer -->
+    <View android:layout_width="0dp"
+        android:layout_height="match_parent"
+        android:layout_weight="1"
+        android:visibility="invisible"/>
+
+    <LinearLayout
+        android:id="@+id/option3"
+        android:layout_width="64dp"
+        android:layout_height="match_parent"
+        android:background="?android:attr/actionBarItemBackground"
+        android:contentDescription="@string/silent_mode_ring"
+        android:focusable="true"
+        >
+        <ImageView
+            android:layout_width="48dp"
+            android:layout_height="match_parent"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:layout_marginEnd="8dp"
+            android:layout_marginTop="6dp"
+            android:layout_marginBottom="6dp"
+            android:src="@drawable/ic_audio_ring_notif"
+            android:scaleType="center"
+            android:duplicateParentState="true"
+            android:background="@drawable/silent_mode_indicator"
+            />
+    </LinearLayout>
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/grant_credentials_permission.xml b/android-sdk/platforms/android-34/data/res/layout/grant_credentials_permission.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e7ec539fce7a93b31e1bc76306c391e8ff9d8493
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/grant_credentials_permission.xml
@@ -0,0 +1,147 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2008, Google Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:divider="?android:attr/dividerHorizontal"
+    android:showDividers="middle"
+    android:dividerPadding="0dip" >
+
+    <!-- The list of packages that correspond to the requesting UID
+    and the account/authtokenType that is being requested -->
+    <ScrollView
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:fillViewport="true"
+        android:layout_weight="1"
+        android:gravity="top|center_horizontal">
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:paddingTop="14dip"
+            android:orientation="vertical">
+
+            <TextView
+                android:id="@+id/grant_credentials_permission_message_header"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:text="@string/grant_credentials_permission_message_header"
+                android:textAppearance="?android:attr/textAppearanceMedium"
+                android:paddingStart="19dip"
+                android:paddingBottom="12dip" />
+
+            <LinearLayout
+                android:id="@+id/packages_list"
+                android:orientation="vertical"
+                android:paddingStart="16dip"
+                android:paddingEnd="12dip"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content" />
+
+            <RelativeLayout
+                android:paddingStart="16dip"
+                android:paddingEnd="12dip"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+
+                <ImageView
+                    android:id="@+id/permission_icon"
+                    android:layout_width="30dip"
+                    android:layout_height="30dip"
+                    android:src="@drawable/ic_bullet_key_permission"
+                    android:layout_alignParentStart="true"
+                    android:scaleType="fitCenter" />
+
+                <TextView
+                    android:id="@+id/account_type"
+                    android:textAppearance="?android:attr/textAppearanceMedium"
+                    android:textColor="@color/perms_dangerous_perm_color"
+                    android:textStyle="bold"
+                    android:paddingStart="16dip"
+                    android:layout_toEndOf="@id/permission_icon"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content" />
+
+                <TextView
+                    android:id="@+id/account_name"
+                    android:textAppearance="?android:attr/textAppearanceSmall"
+                    android:textColor="@color/perms_dangerous_perm_color"
+                    android:layout_marginTop="-4dip"
+                    android:paddingBottom="8dip"
+                    android:paddingStart="16dip"
+                    android:layout_below="@id/account_type"
+                    android:layout_toEndOf="@id/permission_icon"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content" />
+
+                <TextView
+                    android:id="@+id/authtoken_type"
+                    android:textAppearance="?android:attr/textAppearanceMedium"
+                    android:textColor="@color/perms_dangerous_perm_color"
+                    android:textStyle="bold"
+                    android:layout_marginTop="-4dip"
+                    android:paddingBottom="8dip"
+                    android:paddingStart="16dip"
+                    android:layout_below="@id/account_name"
+                    android:layout_toEndOf="@id/permission_icon"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content" />
+            </RelativeLayout>
+
+            <TextView
+                android:id="@+id/grant_credentials_permission_message_footer"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:text="@string/grant_credentials_permission_message_footer"
+                android:textAppearance="?android:attr/textAppearanceMedium"
+                android:paddingStart="19dip"
+                android:paddingBottom="12dip" />
+        </LinearLayout>
+    </ScrollView>
+
+    <!-- The buttons to allow or deny -->
+    <LinearLayout
+        android:id="@+id/buttons"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        style="?android:attr/buttonBarStyle">
+
+        <Button
+            android:id="@+id/deny_button"
+            android:text="@string/deny"
+            android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="2"
+            style="?android:attr/buttonBarButtonStyle" />
+
+        <Button
+            android:id="@+id/allow_button"
+            android:text="@string/allow"
+            android:layout_width="0dip"
+            android:layout_height="wrap_content"
+            android:layout_weight="2"
+            style="?android:attr/buttonBarButtonStyle" />
+
+    </LinearLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/harmful_app_warning_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/harmful_app_warning_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..62ca7a6fde5b39287a9ab878011df024241ed9e5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/harmful_app_warning_dialog.xml
@@ -0,0 +1,68 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2018, Google Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+
+<ScrollView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        xmlns:app="http://schemas.android.com/apk/res-auto"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:fillViewport="true">
+    <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingTop="@dimen/harmful_app_padding_top"
+            android:orientation="vertical">
+
+        <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:paddingBottom="@dimen/harmful_app_name_padding_bottom"
+                android:paddingLeft="@dimen/harmful_app_name_padding_left"
+                android:paddingRight="@dimen/harmful_app_name_padding_right"
+                android:paddingTop="@dimen/harmful_app_name_padding_top"
+                android:orientation="horizontal">
+
+            <ImageView
+                    android:layout_width="@dimen/harmful_app_icon_size"
+                    android:layout_height="@dimen/harmful_app_icon_size"
+                    android:scaleType="fitCenter"
+                    android:src="@drawable/red_shield"/>
+
+            <TextView
+                    android:id="@+id/app_name_text"
+                    android:layout_width="wrap_content"
+                    android:layout_height="match_parent"
+                    android:gravity="center_vertical"
+                    android:textColor="?attr/textColorPrimary"
+                    android:textSize="@dimen/text_size_subhead_material"
+                    android:paddingLeft="@dimen/harmful_app_icon_name_padding">
+            </TextView>
+        </LinearLayout>
+
+        <TextView
+                android:id="@+id/message"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingLeft="@dimen/harmful_app_message_padding_left"
+                android:paddingRight="@dimen/harmful_app_message_padding_right"
+                android:paddingBottom="@dimen/harmful_app_message_padding_bottom"
+                android:lineSpacingMultiplier="@dimen/harmful_app_message_line_spacing_modifier"
+                android:textSize="@dimen/text_size_body_1_material"/>
+    </LinearLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/heavy_weight_switcher.xml b/android-sdk/platforms/android-34/data/res/layout/heavy_weight_switcher.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3f568f68cbfebdd3e70a52279fb810a4e303e4ab
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/heavy_weight_switcher.xml
@@ -0,0 +1,112 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:paddingVertical="24dp"
+    android:paddingHorizontal="16dp"
+    android:gravity="center_horizontal"
+    android:layout_width="wrap_content" android:layout_height="wrap_content">
+
+    <TextView
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="0"
+        android:paddingBottom="20dp"
+        android:paddingHorizontal="8dp"
+        android:textAppearance="?android:attr/textAppearanceLarge"
+        android:text="@string/heavy_weight_switcher_title"/>
+
+    <TextView
+        android:layout_width="match_parent" android:layout_height="wrap_content"
+        android:layout_weight="0"
+        android:paddingBottom="16dp"
+        android:paddingHorizontal="8dp"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:text="@string/heavy_weight_switcher_text"/>
+
+    <LinearLayout android:id="@+id/switch_old"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="72dp"
+        android:paddingHorizontal="8dp"
+        android:orientation="horizontal"
+        android:background="?android:attr/selectableItemBackground"
+        android:gravity="center_vertical"
+        android:focusable="true" >
+    
+        <ImageView android:id="@+id/old_app_icon"
+            android:layout_width="@android:dimen/app_icon_size"
+            android:layout_height="@android:dimen/app_icon_size"
+            android:layout_marginEnd="11dip"
+            android:layout_gravity="center_vertical"
+            android:scaleType="fitCenter"/>
+    
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:duplicateParentState="true" >
+            <TextView android:id="@+id/old_app_action"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="?android:attr/textAppearanceMedium"
+                android:textStyle="bold"
+                android:singleLine="true"
+                android:duplicateParentState="true" />
+        </LinearLayout>
+    </LinearLayout>
+
+    <LinearLayout android:id="@+id/switch_new"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="88dp"
+        android:paddingHorizontal="8dp"
+        android:orientation="horizontal"
+        android:background="?android:attr/selectableItemBackground"
+        android:gravity="center_vertical"
+        android:focusable="true" >
+    
+        <ImageView android:id="@+id/new_app_icon"
+            android:layout_width="@android:dimen/app_icon_size"
+            android:layout_height="@android:dimen/app_icon_size"
+            android:layout_marginEnd="11dip"
+            android:layout_gravity="center_vertical"
+            android:scaleType="fitCenter"/>
+    
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:duplicateParentState="true" >
+            <TextView android:id="@+id/new_app_action"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="?android:attr/textAppearanceMedium"
+                android:textStyle="bold"
+                android:singleLine="true"
+                android:layout_marginBottom="2dp"
+                android:duplicateParentState="true" />
+            <TextView android:id="@+id/new_app_description"
+                android:layout_marginTop="-4dp"
+                android:layout_gravity="center_vertical"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="?android:attr/textAppearanceSmall"
+                android:duplicateParentState="true" />
+        </LinearLayout>
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/icon_menu_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/icon_menu_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..cdb5bfa77ea25eefce9ce2fa72b622049cb8adce
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/icon_menu_item_layout.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.IconMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/title"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:paddingBottom="1dip"
+    android:paddingStart="3dip"
+    android:paddingEnd="3dip"
+    android:singleLine="true"
+    android:ellipsize="marquee"
+    android:fadingEdge="horizontal" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/immersive_mode_cling.xml b/android-sdk/platforms/android-34/data/res/layout/immersive_mode_cling.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9fd615dc96b73ed3d3d810005a562cfafbe01b38
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/immersive_mode_cling.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?android:attr/colorAccent"
+        android:gravity="center_vertical"
+        android:paddingBottom="24dp">
+
+    <FrameLayout
+            android:id="@+id/immersive_cling_chevron"
+            android:layout_width="76dp"
+            android:layout_height="76dp"
+            android:layout_marginTop="-24dp"
+            android:layout_centerHorizontal="true">
+
+        <ImageView
+                android:id="@+id/immersive_cling_back_bg_light"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:scaleType="center"
+                android:src="@drawable/immersive_cling_light_bg_circ" />
+
+        <ImageView
+                android:id="@+id/immersive_cling_back_bg"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:scaleType="center"
+                android:src="@drawable/immersive_cling_bg_circ" />
+
+        <ImageView
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:paddingTop="8dp"
+                android:scaleType="center"
+                android:src="@drawable/ic_expand_more_48dp"
+                android:tint="?android:attr/colorAccent"/>
+    </FrameLayout>
+
+    <TextView
+            android:id="@+id/immersive_cling_title"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/immersive_cling_chevron"
+            android:paddingEnd="48dp"
+            android:paddingStart="48dp"
+            android:paddingTop="40dp"
+            android:text="@string/immersive_cling_title"
+            android:textColor="@android:color/white"
+            android:textSize="24sp" />
+
+    <TextView
+            android:id="@+id/immersive_cling_description"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/immersive_cling_title"
+            android:paddingEnd="48dp"
+            android:paddingStart="48dp"
+            android:paddingTop="12.6dp"
+            android:text="@string/immersive_cling_description"
+            android:textColor="@android:color/white"
+            android:textSize="16sp" />
+
+    <Button
+            android:id="@+id/ok"
+            style="@style/Widget.Material.Button.Borderless"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true"
+            android:layout_below="@+id/immersive_cling_description"
+            android:layout_marginEnd="40dp"
+            android:layout_marginTop="18dp"
+            android:paddingEnd="8dp"
+            android:paddingStart="8dp"
+            android:text="@string/immersive_cling_positive"
+            android:textColor="@android:color/white"
+            android:textSize="14sp" />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method.xml b/android-sdk/platforms/android-34/data/res/layout/input_method.xml
new file mode 100644
index 0000000000000000000000000000000000000000..79f1ce80ecaa6612f06b43bf29c7ba4f042482cc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method.xml
@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/alert_dialog.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    >
+
+    <LinearLayout
+        android:id="@+id/fullscreenArea"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        >
+
+        <FrameLayout android:id="@android:id/extractArea"
+            android:layout_width="match_parent"
+            android:layout_height="0px"
+            android:layout_weight="1"
+            android:visibility="gone">
+        </FrameLayout>
+        
+        <FrameLayout android:id="@android:id/candidatesArea"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:visibility="invisible">
+        </FrameLayout>
+
+    </LinearLayout>
+            
+    <FrameLayout android:id="@android:id/inputArea"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:visibility="gone">
+    </FrameLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_extract_view.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_extract_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bfa6451c88a71f8d9428d1168bd507b4b154d580
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_extract_view.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/alert_dialog.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<android.inputmethodservice.ExtractEditLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:orientation="horizontal">
+
+    <android.inputmethodservice.ExtractEditText
+            android:id="@+id/inputExtractEditText"
+            android:layout_width="0px"
+            android:layout_height="match_parent"
+            android:layout_weight="1"
+            android:scrollbars="vertical"
+            android:gravity="top"
+            android:minLines="1"
+            android:inputType="text">
+    </android.inputmethodservice.ExtractEditText>
+
+    <FrameLayout
+            android:id="@+id/inputExtractAccessories"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:paddingStart="8dip"
+            android:paddingEnd="8dip">
+
+        <android.inputmethodservice.ExtractButton
+            android:id="@+id/inputExtractAction"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"/>
+    </FrameLayout>
+
+</android.inputmethodservice.ExtractEditLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_nav_back.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_back.xml
new file mode 100644
index 0000000000000000000000000000000000000000..671766aec28193661c88f97b2d46ed31b735a543
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_back.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<android.inputmethodservice.navigationbar.KeyButtonView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/input_method_nav_back"
+    android:layout_width="@dimen/input_method_navigation_key_width"
+    android:layout_height="match_parent"
+    android:layout_weight="0"
+    android:scaleType="center"
+    android:contentDescription="@string/input_method_nav_back_button_desc"
+    android:paddingStart="@dimen/input_method_navigation_key_padding"
+    android:paddingEnd="@dimen/input_method_navigation_key_padding"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_nav_home_handle.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_home_handle.xml
new file mode 100644
index 0000000000000000000000000000000000000000..501f5126aff8ed58fdfcce8a8b935cfa4fce6d3d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_home_handle.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.inputmethodservice.navigationbar.NavigationHandle
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/input_method_nav_home_handle"
+    android:layout_width="72dp"
+    android:layout_height="match_parent"
+    android:layout_weight="0"
+    android:paddingStart="@dimen/input_method_navigation_key_padding"
+    android:paddingEnd="@dimen/input_method_navigation_key_padding"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_nav_ime_switcher.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_ime_switcher.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b571ba92783787ec96a2665593d031f0bab4998b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_nav_ime_switcher.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.inputmethodservice.navigationbar.KeyButtonView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/input_method_nav_ime_switcher"
+    android:layout_width="@dimen/input_method_navigation_key_width"
+    android:layout_height="match_parent"
+    android:layout_weight="0"
+    android:contentDescription="@string/input_method_ime_switch_button_desc"
+    android:scaleType="center"
+    android:paddingStart="@dimen/input_method_navigation_key_padding"
+    android:paddingEnd="@dimen/input_method_navigation_key_padding"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_bar.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_bar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ce402fbce8917b53225bb6e163ccaeac38e8704e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_bar.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.inputmethodservice.navigationbar.NavigationBarView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/input_method_navigation_bar_view"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent"
+    android:clipChildren="false"
+    android:clipToPadding="false">
+
+    <android.inputmethodservice.navigationbar.NavigationBarInflaterView
+        android:id="@+id/input_method_nav_inflater"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:clipChildren="false"
+        android:clipToPadding="false" />
+
+</android.inputmethodservice.navigationbar.NavigationBarView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_layout.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e0f01436c216d20edf598fda0af132081ab7fb5b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_navigation_layout.xml
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2022 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_marginStart="@dimen/rounded_corner_content_padding"
+    android:layout_marginEnd="@dimen/rounded_corner_content_padding"
+    android:paddingStart="@dimen/input_method_nav_content_padding"
+    android:paddingEnd="@dimen/input_method_nav_content_padding"
+    android:clipChildren="false"
+    android:clipToPadding="false"
+    android:id="@+id/input_method_nav_horizontal">
+
+    <FrameLayout
+        android:id="@+id/input_method_nav_buttons"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:clipChildren="false"
+        android:clipToPadding="false">
+
+        <LinearLayout
+            android:id="@+id/input_method_nav_ends_group"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:orientation="horizontal"
+            android:clipToPadding="false"
+            android:clipChildren="false" />
+
+        <LinearLayout
+            android:id="@+id/input_method_nav_center_group"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_gravity="center"
+            android:gravity="center"
+            android:orientation="horizontal"
+            android:clipToPadding="false"
+            android:clipChildren="false" />
+
+    </FrameLayout>
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_switch_dialog_title.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_switch_dialog_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..48fd5e6156871ad3c40d386c33f31fcfb5993471
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_switch_dialog_title.xml
@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2012, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical" >
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:gravity="center_vertical|start"
+            android:paddingStart="?attr/dialogPreferredPadding"
+            android:paddingEnd="?attr/dialogPreferredPadding"
+            android:paddingTop="@dimen/dialog_padding_top_material">
+
+            <com.android.internal.widget.DialogTitle
+                android:id="@+id/alertTitle"
+                style="?attr/windowTitleStyle"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:textAlignment="viewStart"
+                android:text="@string/select_input_method" />
+        </LinearLayout>
+    </LinearLayout>
+
+    <!-- Hard keyboard switch -->
+
+    <LinearLayout
+        android:id="@+id/hard_keyboard_section"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical" >
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal" >
+
+            <LinearLayout
+                android:layout_width="0dp"
+                android:layout_height="wrap_content"
+                android:layout_weight="1"
+                android:background="?attr/selectableItemBackground"
+                android:ellipsize="marquee"
+                android:gravity="center_vertical"
+                android:minHeight="?attr/listPreferredItemHeightSmall"
+                android:orientation="vertical"
+                android:paddingBottom="5dp"
+                android:paddingStart="?attr/listPreferredItemPaddingStart"
+                android:paddingEnd="16dp"
+                android:paddingTop="16dp" >
+
+                <TextView
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:singleLine="true"
+                    android:text="@string/hardware"
+                    android:textAppearance="?attr/textAppearanceListItem"
+                    android:ellipsize="marquee" />
+
+                <TextView
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:maxLines="10"
+                    android:text="@string/show_ime"
+                    android:textAppearance="?attr/textAppearanceListItemSecondary"
+                    android:textColor="?attr/textColorSecondary" />
+            </LinearLayout>
+
+            <Switch
+                android:id="@+id/hard_keyboard_switch"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                android:layout_marginEnd="?attr/listPreferredItemPaddingEnd" />
+        </LinearLayout>
+
+        <View
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="?attr/listDividerAlertDialog" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/input_method_switch_item.xml b/android-sdk/platforms/android-34/data/res/layout/input_method_switch_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6185ed6258007e908691a8e80f07acd607607ba1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/input_method_switch_item.xml
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd">
+
+    <RadioButton android:id="@+id/radio"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingEnd="16dp"
+        android:gravity="center_vertical"
+        android:focusable="false"
+        android:clickable="false" />
+
+    <LinearLayout
+        android:layout_width="0dp"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:gravity="center_vertical">
+
+        <TextView android:id="@id/text1"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="?attr/textAppearanceListItem"
+            android:singleLine="true"
+            android:ellipsize="marquee" />
+
+        <TextView android:id="@id/text2"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="?attr/textAppearanceListItemSecondary"
+            android:singleLine="true"
+            android:ellipsize="marquee" />
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/js_prompt.xml b/android-sdk/platforms/android-34/data/res/layout/js_prompt.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d80fbc8e854e33e2c29a8c13f9d79cb01c89dcef
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/js_prompt.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:orientation="vertical"
+        android:layout_width="match_parent" 
+        android:layout_height="wrap_content"
+        android:gravity="center_horizontal"
+        >
+
+    <TextView android:id="@+id/message"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            />
+
+	<EditText android:id="@+id/value"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:textStyle="bold"
+            android:inputType="text"
+            android:selectAllOnFocus="true"
+            android:scrollHorizontally="true"
+            android:layout_marginTop="6dip"
+            />
+                
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/keyboard_key_preview.xml b/android-sdk/platforms/android-34/data/res/layout/keyboard_key_preview.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a6e096b4ef2ff614f3b24e709f9116c8c89a48ae
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/keyboard_key_preview.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* 
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content" 
+    android:layout_height="80sp"
+    android:textSize="40sp"
+    android:textColor="?android:attr/textColorPrimaryInverse"
+    android:minWidth="32dip"
+    android:gravity="center"
+    android:background="@drawable/keyboard_key_feedback"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/keyboard_popup_keyboard.xml b/android-sdk/platforms/android-34/data/res/layout/keyboard_popup_keyboard.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6f222bfa1178f6ab5cf8a2fba7aab3a859dd3478
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/keyboard_popup_keyboard.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* 
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:background="@android:drawable/keyboard_popup_panel_background"
+        >
+        
+    <android.inputmethodservice.KeyboardView
+            android:id="@android:id/keyboardView"
+            android:background="@android:color/transparent"
+            android:layout_alignParentBottom="true"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:keyPreviewLayout="@layout/keyboard_key_preview"
+            android:popupLayout="@layout/keyboard_popup_keyboard"
+            android:keyTextSize="22sp"
+            />
+    <ImageButton android:id="@android:id/closeButton"
+        android:background="@android:color/transparent"
+        android:src="@drawable/btn_close" 
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center"
+        android:layout_marginStart="8dp"
+        android:clickable="true"
+        />
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/keyguard.xml b/android-sdk/platforms/android-34/data/res/layout/keyguard.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f8f482d15acb137ec6e5095088e41d5a3a32cf18
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/keyguard.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/keyguard.xml
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:paddingStart="20dip"
+    android:paddingTop="20dip"
+    android:paddingEnd="20dip"
+    android:paddingBottom="20dip"
+    android:orientation="vertical" 
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:background="#ff000000">
+
+    <TextView
+        android:id="@+id/label"
+        android:textSize="16sp" 
+        android:textStyle="bold" 
+        android:textColor="#FFFFFFFF" 
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" 
+        android:text="@string/keyguard_label_text" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_item.xml b/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..def0cccf38ae0aa28e099ee897d1675799ba5fab
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_item.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0" encoding="utf-8"?>
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/language_item"
+    android:layout_height="wrap_content"
+    android:layout_width="match_parent"
+    android:paddingTop="12dp"
+    android:paddingBottom="12dp"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    >
+
+<LinearLayout
+    android:id="@+id/frame"
+    android:layout_height="wrap_content"
+    android:layout_width="match_parent"
+    android:orientation="vertical"
+    >
+
+    <TextView
+        android:id="@+id/locale_native"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textColor="@drawable/language_picker_item_text_color_selector"
+        android:textSize="18sp"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        />
+
+    <TextView
+        android:id="@+id/locale_secondary"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textColor="@drawable/language_picker_item_text_color2_selector"
+        android:textSize="16sp"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        />
+</LinearLayout>
+
+<ImageView
+    android:id="@+id/indicator"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_alignParentEnd="true"
+    android:adjustViewBounds="true"
+    android:layout_marginEnd="10dp"
+    android:layout_centerVertical="true"
+    android:src="@drawable/bilingual_language_item_selection_indicator"
+    android:visibility="gone" />
+</RelativeLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_section_header.xml b/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_section_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2dbf739963d5b7169709acb46103a3bca8998f5a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/language_picker_bilingual_section_header.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2022 Google Inc.
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+          xmlns:tools="http://schemas.android.com/tools"
+          style="?android:attr/preferenceCategoryStyle"
+          android:layout_width="match_parent"
+          android:layout_height="36dp"
+          android:gravity="center_vertical"
+          android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+          android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+          android:textColor="@color/language_picker_item_text_color"
+          android:textAllCaps="true"
+          tools:text="@string/language_picker_section_all"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/language_picker_item.xml b/android-sdk/platforms/android-34/data/res/layout/language_picker_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..88012a939857e4544d8698d68112bf906b122ac2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/language_picker_item.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+          android:layout_width="match_parent"
+          android:layout_height="wrap_content"
+          android:id="@+id/locale"
+          android:gravity="center_vertical"
+          android:minHeight="?android:attr/listPreferredItemHeight"
+          android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+          android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+          android:textAppearance="?android:attr/textAppearanceListItem"
+          android:layoutDirection="locale"
+          android:textDirection="locale"
+          android:paddingBottom="8dp"
+          android:paddingTop="8dp" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/language_picker_section_header.xml b/android-sdk/platforms/android-34/data/res/layout/language_picker_section_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..58042f9a42f8eb42b0849737a2664fb1484feeaf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/language_picker_section_header.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+          xmlns:tools="http://schemas.android.com/tools"
+          style="?android:attr/preferenceCategoryStyle"
+          android:layout_width="match_parent"
+          android:layout_height="36dp"
+          android:gravity="center_vertical"
+          android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+          android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+          android:textColor="?android:attr/colorAccent"
+          android:textStyle="bold"
+          android:id="@+id/language_picker_header"
+          tools:text="@string/language_picker_section_all"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/launch_warning.xml b/android-sdk/platforms/android-34/data/res/layout/launch_warning.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1923ff075231e940f9ef314b756ef2e5056405ad
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/launch_warning.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical">
+
+    <ImageView
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="6dp"
+        android:paddingBottom="6dp"
+        android:scaleType="fitXY"
+        android:gravity="fill_horizontal"
+        android:src="@android:drawable/divider_horizontal_dark" />
+            
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="10dip"
+        android:orientation="horizontal">
+        <ImageView android:id="@+id/replace_app_icon"
+            android:layout_width="@android:dimen/app_icon_size"
+            android:layout_height="@android:dimen/app_icon_size"
+            android:scaleType="fitCenter" />
+        <TextView android:id="@+id/replace_message"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:padding="5dip" />
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="10dip"
+        android:orientation="horizontal">
+        <ImageView android:id="@+id/original_app_icon"
+            android:layout_width="@android:dimen/app_icon_size"
+            android:layout_height="@android:dimen/app_icon_size"
+            android:scaleType="fitCenter" />
+        <TextView android:id="@+id/original_message"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:padding="5dip" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_content.xml b/android-sdk/platforms/android-34/data/res/layout/list_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..45ade4d0c6d7e5a4794458a88269c5ffb0cce582
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_content.xml
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent">
+    
+    <LinearLayout android:id="@+id/progressContainer"
+            android:orientation="vertical"
+            android:layout_width="match_parent" 
+            android:layout_height="match_parent"
+            android:visibility="gone"
+            android:gravity="center">
+        
+        <ProgressBar style="?android:attr/progressBarStyleLarge"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content" />
+        <TextView android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:textAppearance="?android:attr/textAppearanceSmall"
+                android:text="@string/loading"
+                android:paddingTop="4dip"
+                android:singleLine="true" />
+            
+    </LinearLayout>
+        
+    <FrameLayout android:id="@+id/listContainer"
+            android:layout_width="match_parent" 
+            android:layout_height="match_parent">
+            
+        <ListView android:id="@android:id/list"
+                android:layout_width="match_parent" 
+                android:layout_height="match_parent" />
+        <TextView android:id="@+android:id/internalEmpty"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:gravity="center"
+                android:textAppearance="?android:attr/textAppearanceLarge" />
+    </FrameLayout>
+        
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_content_simple.xml b/android-sdk/platforms/android-34/data/res/layout/list_content_simple.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6f9f1e0f0f6f7b63c9de051b779748ab6f19ab6a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_content_simple.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<ListView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/list"
+    android:layout_width="match_parent" 
+    android:layout_height="match_parent"
+    android:drawSelectorOnTop="false"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_gestures_overlay.xml b/android-sdk/platforms/android-34/data/res/layout/list_gestures_overlay.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5ebf0924892cf68cd8a1e73ce3098ba5f0b20518
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_gestures_overlay.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<android.gesture.GestureOverlayView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_menu_item_checkbox.xml b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_checkbox.xml
new file mode 100644
index 0000000000000000000000000000000000000000..dc02a1e5d45bb247f9d4415bb78c0b964925f160
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_checkbox.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckBox xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/checkbox"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center_vertical"
+    android:focusable="false"
+    android:clickable="false"
+    android:duplicateParentState="true" />
+
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_menu_item_fixed_size_icon.xml b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_fixed_size_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7797682d19677b18bcaf1646deaf5c27ecefc21e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_fixed_size_icon.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2023 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ImageView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/icon"
+    android:layout_width="24dp"
+    android:layout_height="24dp"
+    android:layout_gravity="center_vertical"
+    android:layout_marginStart="0dip"
+    android:layout_marginEnd="6dip"
+    android:layout_marginTop="0dip"
+    android:layout_marginBottom="0dip"
+    android:scaleType="centerInside"
+    android:duplicateParentState="true" />
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_menu_item_icon.xml b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a30be6a13db6a726f60ea1a67538e20907277c10
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_icon.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ImageView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/icon"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center_vertical"
+    android:layout_marginStart="8dip"
+    android:layout_marginEnd="-8dip"
+    android:layout_marginTop="8dip"
+    android:layout_marginBottom="8dip"
+    android:scaleType="centerInside"
+    android:duplicateParentState="true" />
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_menu_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e8d4983416a5d14f7a97099f7d3147b5fc9216ea
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_layout.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.ListMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeightSmall">
+    
+    <!-- Icon will be inserted here. -->
+    
+    <!-- The title and summary have some gap between them, and this 'group' should be centered vertically. -->
+    <RelativeLayout
+        android:layout_width="0dip"
+        android:layout_weight="1"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:layout_marginStart="?android:attr/listPreferredItemPaddingStart"
+        android:layout_marginEnd="?android:attr/listPreferredItemPaddingEnd"
+        android:duplicateParentState="true">
+        
+        <TextView 
+            android:id="@+id/title"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_alignParentTop="true"
+            android:layout_alignParentStart="true"
+            android:textAppearance="?android:attr/textAppearanceListItemSmall"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal"
+            android:textAlignment="viewStart" />
+
+        <TextView
+            android:id="@+id/shortcut"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/title"
+            android:layout_alignParentStart="true"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:singleLine="true"
+            android:duplicateParentState="true"
+            android:textAlignment="viewStart" />
+
+    </RelativeLayout>
+
+    <!-- Checkbox, and/or radio button will be inserted here. -->
+    
+</com.android.internal.view.menu.ListMenuItemView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/list_menu_item_radio.xml b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_radio.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ac4459eca6a53f84ac82108509b9ab6d1b5d80a1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/list_menu_item_radio.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RadioButton xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/radio"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_gravity="center_vertical"
+    android:focusable="false"
+    android:clickable="false"
+    android:duplicateParentState="true" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/locale_picker_item.xml b/android-sdk/platforms/android-34/data/res/layout/locale_picker_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..defdd4d5b4561c2553b5d5ec5f6cb948e0421ebe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/locale_picker_item.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="horizontal"
+    android:layout_height="wrap_content"
+    android:layout_width="match_parent"
+    android:gravity="center_vertical"
+    android:minHeight="?attr/listPreferredItemHeight"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:paddingTop="8dp"
+    android:paddingBottom="8dp">
+
+    <TextView android:id="@+id/locale"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="?android:attr/textAppearanceListItem" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/media_controller.xml b/android-sdk/platforms/android-34/data/res/layout/media_controller.xml
new file mode 100644
index 0000000000000000000000000000000000000000..24c2866e120c894dac78c490f6a6bbd8eab6bfd1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/media_controller.xml
@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:background="#CC000000"
+    android:orientation="vertical"
+    android:layoutDirection="ltr">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:gravity="center"
+        android:paddingTop="4dip"
+        android:orientation="horizontal">
+
+        <ImageButton android:id="@+id/prev" style="@android:style/MediaButton.Previous" />
+        <ImageButton android:id="@+id/rew" style="@android:style/MediaButton.Rew" />
+        <ImageButton android:id="@+id/pause" style="@android:style/MediaButton.Play" />
+        <ImageButton android:id="@+id/ffwd" style="@android:style/MediaButton.Ffwd" />
+        <ImageButton android:id="@+id/next" style="@android:style/MediaButton.Next" />
+
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal">
+
+        <TextView android:id="@+id/time_current"
+            android:textSize="14sp"
+            android:textStyle="bold"
+            android:paddingTop="4dip"
+            android:paddingStart="4dip"
+            android:layout_gravity="center_horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingEnd="4dip"
+            android:textColor="@color/dim_foreground_dark" />
+
+        <SeekBar
+            android:id="@+id/mediacontroller_progress"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="0dip"
+            android:layout_weight="1"
+            android:layout_height="32dip"
+            android:layout_alignParentStart="true"
+            android:layout_alignParentEnd="true" />
+
+        <TextView android:id="@+id/time"
+            android:textSize="14sp"
+            android:textStyle="bold"
+            android:paddingTop="4dip"
+            android:paddingEnd="4dip"
+            android:layout_gravity="center_horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingStart="4dip"
+            android:textColor="@color/dim_foreground_dark" />
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/media_route_chooser_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/media_route_chooser_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bf73f4b26c9cd3a49b2ff3339593f0fa613e1b57
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/media_route_chooser_dialog.xml
@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:orientation="vertical"
+              android:divider="?android:attr/dividerHorizontal"
+              android:showDividers="middle">
+    <!-- List of routes. -->
+    <ListView android:id="@+id/media_route_list"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:layout_weight="1" />
+
+    <!-- Content to show when list is empty. -->
+    <LinearLayout android:id="@android:id/empty"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:paddingLeft="16dp"
+        android:paddingRight="16dp"
+        android:visibility="gone">
+        <ProgressBar android:id="@+id/media_route_progress_bar"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center" />
+        <TextView android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:paddingStart="16dp"
+            android:text="@string/media_route_chooser_searching" />
+    </LinearLayout>
+
+    <!-- Settings button. -->
+    <LinearLayout android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  style="?attr/buttonBarStyle">
+        <Button android:id="@+id/media_route_extended_settings_button"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                style="?attr/buttonBarButtonStyle"
+                android:gravity="center"
+                android:text="@string/media_route_chooser_extended_settings"
+                android:visibility="gone" />
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/media_route_controller_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/media_route_controller_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..24a25353f40d6c9f77d429b913c3445b4c0de286
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/media_route_controller_dialog.xml
@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content">
+    <LinearLayout android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  android:orientation="vertical"
+                  android:divider="?android:attr/dividerHorizontal"
+                  android:showDividers="middle">
+        <!-- Optional volume slider section. -->
+        <LinearLayout android:id="@+id/media_route_volume_layout"
+                      android:layout_width="match_parent"
+                      android:layout_height="64dp"
+                      android:gravity="center_vertical"
+                      android:padding="8dp"
+                      android:visibility="gone">
+            <ImageView android:layout_width="48dp"
+                       android:layout_height="48dp"
+                       android:src="@drawable/ic_audio_vol"
+                       android:gravity="center"
+                       android:scaleType="center" />
+            <SeekBar android:id="@+id/media_route_volume_slider"
+                     android:layout_width="0dp"
+                     android:layout_height="wrap_content"
+                     android:layout_weight="1"
+                     android:layout_marginLeft="8dp"
+                     android:layout_marginRight="8dp" />
+        </LinearLayout>
+
+        <!-- Optional content view section. -->
+        <FrameLayout android:id="@+id/media_route_control_frame"
+                     android:layout_width="match_parent"
+                     android:layout_height="wrap_content"
+                     android:visibility="gone" />
+    </LinearLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/media_route_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/media_route_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e8460db695827ad489239139337e8fb4123483c6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/media_route_list_item.xml
@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2012 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="?android:attr/listPreferredItemHeight"
+              android:background="@drawable/item_background_activated_holo_dark"
+              android:gravity="center_vertical">
+
+    <LinearLayout android:layout_width="0dp"
+                  android:layout_height="match_parent"
+                  android:layout_weight="1"
+                  android:orientation="vertical"
+                  android:gravity="start|center_vertical"
+                  android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+                  android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+                  android:duplicateParentState="true">
+
+        <TextView android:id="@android:id/text1"
+                  android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  android:singleLine="true"
+                  android:ellipsize="marquee"
+                  android:textAlignment="viewStart"
+                  android:textAppearance="?android:attr/textAppearanceMedium"
+                  android:duplicateParentState="true" />
+
+        <TextView android:id="@android:id/text2"
+                  android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  android:singleLine="true"
+                  android:ellipsize="marquee"
+                  android:textAlignment="viewStart"
+                  android:textAppearance="?android:attr/textAppearanceSmall"
+                  android:duplicateParentState="true" />
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/menu_item.xml b/android-sdk/platforms/android-34/data/res/layout/menu_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..df6462e33a4ae25866159a04d271d1ad3c2844e9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/menu_item.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/menu_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<MenuItemView xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:focusable="true" >
+
+    <TextView android:id="@+id/index"
+        android:paddingStart="0dip" android:paddingTop="1dip"
+        android:paddingEnd="8dip" android:paddingBottom="0dip"
+        android:layout_width="17dip" android:layout_height="wrap_content"
+        android:includeFontPadding="false" />
+
+    <ImageView android:id="@+id/check"
+        android:paddingStart="3dip" android:paddingTop="3dip"
+        android:paddingEnd="3dip" android:paddingBottom="0dip"
+        android:src="@drawable/menuitem_checkbox" android:scaleType="fitCenter"
+        android:layout_width="wrap_content" android:layout_height="wrap_content" />
+
+    <TextView android:id="@+id/title"
+        android:paddingStart="0dip" android:paddingTop="1dip"
+        android:paddingEnd="0dip" android:paddingBottom="2dip"
+        android:layout_width="wrap_content" android:layout_height="wrap_content"
+        android:layout_weight="1" android:includeFontPadding="false" />
+
+    <TextView android:id="@+id/shortcut"
+        android:paddingStart="8dip" android:paddingTop="0dip"
+        android:paddingEnd="0dip" android:paddingBottom="0dip"
+        android:layout_width="20dip" android:layout_height="wrap_content"
+        android:gravity="center_horizontal"  android:includeFontPadding="true"/>
+
+</MenuItemView>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/miniresolver.xml b/android-sdk/platforms/android-34/data/res/layout/miniresolver.xml
new file mode 100644
index 0000000000000000000000000000000000000000..db0ea547fbd505ca09d6e7083c1156a7cd4d4d8e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/miniresolver.xml
@@ -0,0 +1,151 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<!-- Layout used to decide whether to launch a single target in another profile.
+     When this layout is used in ResolverActivity, the user can choose between a verified app in the
+     other profile and the default browser in the current profile.
+     In IntentForwarderActivity, they choose whether to launch in the other profile or cancel. -->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:maxWidth="@dimen/resolver_max_width"
+    android:maxCollapsedHeight="@dimen/resolver_max_collapsed_height"
+    android:maxCollapsedHeightSmall="56dp"
+    android:id="@id/contentPanel">
+
+    <RelativeLayout
+        android:id="@+id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:elevation="@dimen/resolver_elevation"
+        android:paddingTop="24dp"
+        android:paddingStart="@dimen/resolver_edge_margin"
+        android:paddingEnd="@dimen/resolver_edge_margin"
+        android:paddingBottom="@dimen/resolver_title_padding_bottom"
+        android:background="@drawable/bottomsheet_background">
+
+        <ImageView
+            android:id="@+id/icon"
+            android:layout_width="48dp"
+            android:layout_height="48dp"
+            android:layout_alignParentTop="true"
+            android:layout_centerHorizontal="true"
+            android:scaleType="fitCenter"
+        />
+
+        <TextView
+            android:id="@+id/open_cross_profile"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingTop="16dp"
+            android:layout_below="@id/icon"
+            android:layout_centerHorizontal="true"
+            android:fontFamily="@string/config_headlineFontFamily"
+            android:textSize="24sp"
+            android:lineHeight="32sp"
+            android:gravity="center"
+            android:textColor="?android:textColorPrimary"
+        />
+    </RelativeLayout>
+    <!-- Additional information section, currently only shown when redirecting to Telephony apps -->
+    <LinearLayout
+      android:id="@+id/miniresolver_info_section"
+      android:layout_width="match_parent"
+      android:layout_height="wrap_content"
+      android:paddingHorizontal="24dp"
+      android:paddingBottom="48dp"
+      android:visibility="gone"
+      android:background="?attr/colorBackground"
+      android:orientation="horizontal">
+
+      <ImageView
+          android:id="@+id/miniresolver_info_section_icon"
+          android:layout_width="wrap_content"
+          android:layout_height="wrap_content"
+          android:paddingEnd="8dp"
+          android:src="@drawable/ic_info_outline_24"
+          android:tint="?android:textColorSecondary"
+      />
+
+      <TextView
+          android:id="@+id/miniresolver_info_section_text"
+          android:layout_width="wrap_content"
+          android:layout_height="wrap_content"
+          android:layout_alignParentEnd="true"
+          android:paddingEnd="8dp"
+          android:textSize="14sp"
+          android:textAllCaps="false"
+          android:textColor="?android:textColorSecondary"
+          />
+    </LinearLayout>
+
+    <LinearLayout
+        android:id="@+id/button_bar_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:paddingTop="32dp"
+        android:paddingBottom="@dimen/resolver_button_bar_spacing"
+        android:orientation="vertical"
+        android:background="?attr/colorBackground">
+        <RelativeLayout
+            style="?attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_ignoreOffset="true"
+            android:layout_hasNestedScrollIndicator="true"
+            android:gravity="end|center_vertical"
+            android:orientation="horizontal"
+            android:layoutDirection="locale"
+            android:measureWithLargestChild="true"
+            android:layout_marginHorizontal="24dp"
+            android:paddingBottom="2dp"
+            android:elevation="@dimen/resolver_elevation">
+
+            <Button
+                android:id="@+id/use_same_profile_browser"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_alignParentStart="true"
+                android:maxLines="2"
+                android:background="@drawable/resolver_outlined_button_bg"
+                style="?android:attr/borderlessButtonStyle"
+                android:paddingHorizontal="16dp"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:textAllCaps="false"
+                android:text="@string/activity_resolver_use_once"
+            />
+
+            <Button
+                android:id="@+id/button_open"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_alignParentEnd="true"
+                android:maxLines="2"
+                android:paddingHorizontal="16dp"
+                android:background="@drawable/resolver_button_bg"
+                style="?android:attr/borderlessButtonStyle"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:textAllCaps="false"
+                android:textColor="@color/resolver_button_text"
+                android:text="@string/whichViewApplicationLabel"
+            />
+        </RelativeLayout>
+    </LinearLayout>
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_expand_button.xml b/android-sdk/platforms/android-34/data/res/layout/notification_expand_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8eae064cba1f88f20b8ff508a46c706ed36d0af5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_expand_button.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<com.android.internal.widget.NotificationExpandButton
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/expand_button"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minHeight="@dimen/notification_header_height"
+    android:layout_gravity="top|end"
+    android:contentDescription="@string/expand_button_content_description_collapsed"
+    android:paddingHorizontal="16dp"
+    >
+
+    <LinearLayout
+        android:id="@+id/expand_button_pill"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:minHeight="@dimen/notification_expand_button_pill_height"
+        android:orientation="horizontal"
+        android:background="@drawable/expand_button_pill_bg"
+        android:gravity="center_vertical"
+        android:layout_gravity="center_vertical"
+        >
+
+        <TextView
+            android:id="@+id/expand_button_number"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:minHeight="@dimen/notification_expand_button_pill_height"
+            android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+            android:gravity="center_vertical"
+            android:paddingStart="8dp"
+            android:visibility="gone"
+            />
+
+        <ImageView
+            android:id="@+id/expand_button_icon"
+            android:layout_width="@dimen/notification_expand_button_pill_height"
+            android:layout_height="@dimen/notification_expand_button_pill_height"
+            android:padding="2dp"
+            android:scaleType="fitCenter"
+            android:importantForAccessibility="no"
+            />
+
+    </LinearLayout>
+
+</com.android.internal.widget.NotificationExpandButton>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_intruder_content.xml b/android-sdk/platforms/android-34/data/res/layout/notification_intruder_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ffd84d483a8dd393444260c9ed550f4e317bff69
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_intruder_content.xml
@@ -0,0 +1,74 @@
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:padding="4dp"
+    >
+    <ImageView android:id="@+id/icon"
+        android:layout_width="32dp"
+        android:layout_height="32dp"
+        android:scaleType="center"
+        android:padding="4dp"
+        />
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="40dp"
+        android:layout_marginStart="40dp"
+        android:orientation="vertical"
+        >
+        <TextView android:id="@+id/title"
+            android:textAppearance="@style/TextAppearance.StatusBar.EventContent.Title"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal"
+            />
+        <TextView android:id="@+id/text"
+            android:textAppearance="@style/TextAppearance.StatusBar.EventContent"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:layout_marginTop="-4dp"
+            android:singleLine="true"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal"
+            />
+    </LinearLayout>
+    <LinearLayout
+        android:id="@+id/actions"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="48dp"
+        android:orientation="horizontal"
+        android:visibility="gone"
+        >
+        <Button
+            style="?android:attr/buttonBarButtonStyle"
+            android:textAppearance="@style/TextAppearance.StatusBar.EventContent.Title"
+            android:id="@+id/action0"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:visibility="gone"
+            />
+        <Button
+            style="?android:attr/buttonBarButtonStyle"
+            android:textAppearance="@style/TextAppearance.StatusBar.EventContent.Title"
+            android:id="@+id/action1"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:visibility="gone"
+            />
+        <Button
+            style="?android:attr/buttonBarButtonStyle"
+            android:textAppearance="@style/TextAppearance.StatusBar.EventContent.Title"
+            android:id="@+id/action2"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:visibility="gone"
+            />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_action.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_action.xml
new file mode 100644
index 0000000000000000000000000000000000000000..da515d788ce516bc404732d4a97643b9358c9106
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_action.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<Button xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@android:style/NotificationAction"
+    android:id="@+id/action0"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minHeight="48dp"
+    android:layout_gravity="center"
+    android:gravity="start|center_vertical"
+    android:layout_marginStart="4dp"
+    android:singleLine="true"
+    android:textAlignment="viewStart"
+    android:ellipsize="end"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ac90948c8b126667abf9f02cfb5968a2b92b97f6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.EmphasizedNotificationButton
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@style/NotificationEmphasizedAction"
+    android:id="@+id/action0"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minHeight="@dimen/notification_action_emphasized_height"
+    android:layout_marginStart="12dp"
+    android:drawablePadding="6dp"
+    android:gravity="center"
+    android:textColor="@color/notification_default_color"
+    android:singleLine="true"
+    android:ellipsize="end"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized_tombstone.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized_tombstone.xml
new file mode 100644
index 0000000000000000000000000000000000000000..16ea70c70ec180672f13b04404e339136f14d89a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_emphasized_tombstone.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2023 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<com.android.internal.widget.EmphasizedNotificationButton
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@style/NotificationEmphasizedAction"
+    android:id="@+id/action0"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:minHeight="@dimen/notification_action_emphasized_height"
+    android:layout_marginStart="12dp"
+    android:drawablePadding="6dp"
+    android:enabled="false"
+    android:gravity="center"
+    android:singleLine="true"
+    android:ellipsize="end"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_action_list.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..057270aa35df371eff6e19cd33d2dedb43cca593
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_list.xml
@@ -0,0 +1,78 @@
+<?xml version="1.0" encoding="utf-8"?><!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/actions_container"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_marginTop="@dimen/notification_action_list_margin_top"
+    android:layout_gravity="bottom"
+    >
+
+    <LinearLayout
+        android:id="@+id/actions_container_layout"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:gravity="end"
+        android:layout_gravity="bottom"
+        android:orientation="horizontal"
+        android:background="@color/notification_action_list_background_color"
+        >
+
+        <com.android.internal.widget.NotificationActionListLayout
+            android:id="@+id/actions"
+            android:layout_width="0dp"
+            android:layout_weight="1"
+            android:layout_height="wrap_content"
+            android:minHeight="@dimen/notification_action_list_height"
+            android:orientation="horizontal"
+            android:gravity="center_vertical"
+            android:visibility="gone"
+            >
+            <!-- actions will be added here -->
+        </com.android.internal.widget.NotificationActionListLayout>
+
+        <!--
+        This nested linear layout exists to ensure that if the neither of the contained
+        actions is visible we have some minimum padding at the end of the actions is present,
+        then there will be 12dp of padding at the end of the actions list.
+        -->
+        <LinearLayout
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:orientation="horizontal"
+            android:minWidth="@dimen/snooze_and_bubble_gone_padding_end"
+            >
+            <ImageView
+                android:id="@+id/snooze_button"
+                android:layout_width="@dimen/notification_actions_icon_size"
+                android:layout_height="@dimen/notification_actions_icon_size"
+                android:layout_gravity="center_vertical|end"
+                android:visibility="gone"
+                android:scaleType="centerInside"
+                />
+
+            <ImageView
+                android:id="@+id/bubble_button"
+                android:layout_width="@dimen/notification_actions_icon_size"
+                android:layout_height="@dimen/notification_actions_icon_size"
+                android:layout_gravity="center_vertical|end"
+                android:visibility="gone"
+                android:scaleType="centerInside"
+                />
+        </LinearLayout>
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_action_tombstone.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_tombstone.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f16572486df17e57d7b9397c53d0cb939077d4f4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_action_tombstone.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<Button xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@android:style/NotificationTombstoneAction"
+    android:id="@+id/action0"
+    android:layout_width="wrap_content"
+    android:layout_height="48dp"
+    android:layout_marginStart="4dp"
+    android:layout_gravity="center"
+    android:gravity="start|center_vertical"
+    android:textColor="#555555"
+    android:singleLine="true"
+    android:ellipsize="end"
+    android:textAlignment="viewStart"
+    android:alpha="@dimen/notification_action_disabled_alpha"
+    android:enabled="false"
+    android:background="@drawable/notification_material_action_background"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_media_action.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_media_action.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5f1b60e8d0f225f230c31d4c0b41eec486456d17
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_media_action.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<ImageButton
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@android:style/Widget.Material.Button.Borderless.Small"
+    android:layout_width="@dimen/media_notification_action_button_size"
+    android:layout_height="@dimen/media_notification_action_button_size"
+    android:paddingBottom="8dp"
+    android:paddingTop="8dp"
+    android:paddingStart="8dp"
+    android:paddingEnd="8dp"
+    android:gravity="center"
+    android:background="@drawable/notification_material_media_action_background"
+    android:visibility="gone"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_material_reply_text.xml b/android-sdk/platforms/android-34/data/res/layout/notification_material_reply_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2b15dceeb4698078505ea4e571dc64f27770e7aa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_material_reply_text.xml
@@ -0,0 +1,79 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2015 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<!-- Note: this layout is included from a view stub; layout attributes will be overridden. -->
+<LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/notification_material_reply_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        android:paddingStart="@dimen/notification_content_margin_start">
+
+    <ImageView
+            android:layout_width="match_parent"
+            android:layout_height="1dip"
+            android:id="@+id/action_divider"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            android:layout_marginBottom="@dimen/notification_content_margin"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:background="@drawable/notification_template_divider" />
+
+    <TextView
+            android:id="@+id/notification_material_reply_text_3"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:visibility="gone"
+            android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Reply"
+            android:singleLine="true" />
+
+    <TextView
+            android:id="@+id/notification_material_reply_text_2"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:visibility="gone"
+            android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Reply"
+            android:singleLine="true" />
+
+    <LinearLayout
+            android:id="@+id/notification_material_reply_text_1_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:layout_marginEnd="@dimen/notification_content_margin_end">
+        <TextView
+                android:id="@+id/notification_material_reply_text_1"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_weight="1"
+                android:layout_marginEnd="@dimen/notification_content_margin_end"
+                android:layout_gravity="center"
+                android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Reply"
+                android:singleLine="true" />
+        <ProgressBar
+            android:id="@+id/notification_material_reply_progress"
+            android:layout_height="@dimen/messaging_group_sending_progress_size"
+            android:layout_width="@dimen/messaging_group_sending_progress_size"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_gravity="center"
+            android:indeterminate="true"
+            style="?android:attr/progressBarStyleSmall" />
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_header.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..eec49fe97b9d0884b988b00a56adcabdd76fe215
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_header.xml
@@ -0,0 +1,170 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.ConversationHeaderLinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/conversation_header"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:paddingTop="20dp"
+    >
+
+    <TextView
+        android:id="@+id/conversation_text"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Title"
+        android:textSize="16sp"
+        android:singleLine="true"
+        android:layout_weight="1"
+        />
+
+    <TextView
+        android:id="@+id/app_name_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <!-- App Name -->
+    <com.android.internal.widget.ObservableTextView
+        android:id="@+id/app_name_text"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <TextView
+        android:id="@+id/time_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <DateTimeView
+        android:id="@+id/time"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Time"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:showRelative="true"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <ViewStub
+        android:id="@+id/chronometer"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:layout="@layout/notification_template_part_chronometer"
+        android:visibility="gone"
+        />
+
+    <TextView
+        android:id="@+id/verification_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <ImageView
+        android:id="@+id/verification_icon"
+        android:layout_width="@dimen/notification_verification_icon_size"
+        android:layout_height="@dimen/notification_verification_icon_size"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:baseline="10dp"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_notifications_alerted"
+        android:visibility="gone"
+        />
+
+    <TextView
+        android:id="@+id/verification_text"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:layout_weight="100"
+        android:showRelative="true"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <ImageButton
+        android:id="@+id/feedback"
+        android:layout_width="@dimen/notification_feedback_size"
+        android:layout_height="@dimen/notification_feedback_size"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:background="?android:selectableItemBackgroundBorderless"
+        android:contentDescription="@string/notification_feedback_indicator"
+        android:baseline="13dp"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_feedback_indicator"
+        android:visibility="gone"
+        />
+
+    <ImageView
+        android:id="@+id/phishing_alert"
+        android:layout_width="@dimen/notification_phishing_alert_size"
+        android:layout_height="@dimen/notification_phishing_alert_size"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:baseline="10dp"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_dialog_alert_material"
+        android:visibility="gone"
+        android:contentDescription="@string/notification_phishing_alert_content_description"
+        />
+
+    <ImageView
+        android:id="@+id/profile_badge"
+        android:layout_width="@dimen/notification_badge_size"
+        android:layout_height="@dimen/notification_badge_size"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:baseline="10dp"
+        android:scaleType="fitCenter"
+        android:visibility="gone"
+        android:contentDescription="@string/notification_work_profile_content_description"
+        />
+
+    <ImageView
+        android:id="@+id/alerted_icon"
+        android:layout_width="@dimen/notification_alerted_size"
+        android:layout_height="@dimen/notification_alerted_size"
+        android:layout_marginStart="@dimen/notification_conversation_header_separating_margin"
+        android:baseline="10dp"
+        android:contentDescription="@string/notification_alerted_content_description"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_notifications_alerted"
+        android:visibility="gone"
+        />
+</com.android.internal.widget.ConversationHeaderLinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_icon_container.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_icon_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0438dc5b5c811c4ebb5df1fe39848f5e6e0a5c58
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_conversation_icon_container.xml
@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/conversation_icon_container"
+    android:layout_width="@dimen/conversation_content_start"
+    android:layout_height="wrap_content"
+    android:gravity="start|top"
+    android:clipChildren="false"
+    android:clipToPadding="false"
+    android:paddingTop="20dp"
+    android:paddingBottom="16dp"
+    android:importantForAccessibility="no"
+    >
+
+    <FrameLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:clipChildren="false"
+        android:clipToPadding="false"
+        android:layout_gravity="top|center_horizontal"
+        >
+
+        <!-- Big icon: 48x48, 12dp padding top, 16dp padding sides -->
+        <com.android.internal.widget.CachingIconView
+            android:id="@+id/conversation_icon"
+            android:layout_width="@dimen/conversation_avatar_size"
+            android:layout_height="@dimen/conversation_avatar_size"
+            android:layout_marginLeft="@dimen/conversation_badge_protrusion"
+            android:layout_marginRight="@dimen/conversation_badge_protrusion"
+            android:layout_marginBottom="@dimen/conversation_badge_protrusion"
+            android:scaleType="centerCrop"
+            android:importantForAccessibility="no"
+            />
+
+        <ViewStub
+            android:layout="@layout/conversation_face_pile_layout"
+            android:layout_width="@dimen/conversation_avatar_size"
+            android:layout_height="@dimen/conversation_avatar_size"
+            android:layout_marginLeft="@dimen/conversation_badge_protrusion"
+            android:layout_marginRight="@dimen/conversation_badge_protrusion"
+            android:layout_marginBottom="@dimen/conversation_badge_protrusion"
+            android:id="@+id/conversation_face_pile"
+            />
+
+        <FrameLayout
+            android:id="@+id/conversation_icon_badge"
+            android:layout_width="@dimen/conversation_icon_size_badged"
+            android:layout_height="@dimen/conversation_icon_size_badged"
+            android:layout_gravity="end|bottom"
+            android:clipChildren="false"
+            android:clipToPadding="false"
+            >
+
+            <com.android.internal.widget.CachingIconView
+                android:id="@+id/conversation_icon_badge_bg"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:layout_gravity="center"
+                android:src="@drawable/conversation_badge_background"
+                android:forceHasOverlappingRendering="false"
+                android:scaleType="center"
+                />
+
+            <com.android.internal.widget.CachingIconView
+                android:id="@+id/icon"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:layout_margin="4dp"
+                android:layout_gravity="center"
+                android:forceHasOverlappingRendering="false"
+                />
+
+            <com.android.internal.widget.CachingIconView
+                android:id="@+id/conversation_icon_badge_ring"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center"
+                android:src="@drawable/conversation_badge_ring"
+                android:visibility="gone"
+                android:forceHasOverlappingRendering="false"
+                android:clipToPadding="false"
+                android:scaleType="center"
+                />
+        </FrameLayout>
+    </FrameLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_header.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..be1c939f0ff8eafa1252fcfd7cfdaff0988e267f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_header.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2015 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<!-- extends FrameLayout -->
+<NotificationHeaderView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/notification_header"
+    android:layout_width="match_parent"
+    android:layout_height="@dimen/notification_header_height"
+    android:layout_marginBottom="@dimen/notification_header_margin_bottom"
+    android:clipChildren="false"
+    android:gravity="center_vertical"
+    android:orientation="horizontal"
+    android:theme="@style/Theme.DeviceDefault.Notification"
+    android:importantForAccessibility="no"
+    >
+
+    <ImageView
+        android:id="@+id/left_icon"
+        android:layout_width="@dimen/notification_left_icon_size"
+        android:layout_height="@dimen/notification_left_icon_size"
+        android:layout_alignParentStart="true"
+        android:layout_centerVertical="true"
+        android:layout_marginStart="@dimen/notification_left_icon_start"
+        android:background="@drawable/notification_large_icon_outline"
+        android:clipToOutline="true"
+        android:importantForAccessibility="no"
+        android:scaleType="centerCrop"
+        android:visibility="gone"
+        />
+
+    <com.android.internal.widget.CachingIconView
+        android:id="@+id/icon"
+        android:layout_width="@dimen/notification_icon_circle_size"
+        android:layout_height="@dimen/notification_icon_circle_size"
+        android:layout_alignParentStart="true"
+        android:layout_centerVertical="true"
+        android:layout_marginStart="@dimen/notification_icon_circle_start"
+        android:background="@drawable/notification_icon_circle"
+        android:padding="@dimen/notification_icon_circle_padding"
+        android:maxDrawableWidth="@dimen/notification_icon_circle_size"
+        android:maxDrawableHeight="@dimen/notification_icon_circle_size"
+        />
+
+    <!-- extends ViewGroup -->
+    <NotificationTopLineView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/notification_top_line"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_alignParentStart="true"
+        android:layout_centerVertical="true"
+        android:layout_toStartOf="@id/expand_button"
+        android:layout_alignWithParentIfMissing="true"
+        android:clipChildren="false"
+        android:gravity="center_vertical"
+        android:paddingStart="@dimen/notification_content_margin_start"
+        android:theme="@style/Theme.DeviceDefault.Notification"
+        >
+
+        <include layout="@layout/notification_top_line_views" />
+
+    </NotificationTopLineView>
+
+    <FrameLayout
+        android:id="@+id/alternate_expand_target"
+        android:layout_width="@dimen/notification_content_margin_start"
+        android:layout_height="match_parent"
+        android:layout_alignParentStart="true"
+        android:importantForAccessibility="no"
+        />
+
+    <include layout="@layout/notification_expand_button"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentEnd="true"
+        android:layout_centerVertical="true"
+        />
+
+</NotificationHeaderView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_base.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_base.xml
new file mode 100644
index 0000000000000000000000000000000000000000..710a70a32955a1d48f95619c3d65fc9b586f036a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_base.xml
@@ -0,0 +1,176 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_weight="1"
+    android:minHeight="@dimen/notification_headerless_min_height"
+    android:tag="base"
+    >
+
+    <ImageView
+        android:id="@+id/left_icon"
+        android:layout_width="@dimen/notification_left_icon_size"
+        android:layout_height="@dimen/notification_left_icon_size"
+        android:layout_gravity="center_vertical|start"
+        android:layout_marginStart="@dimen/notification_left_icon_start"
+        android:background="@drawable/notification_large_icon_outline"
+        android:clipToOutline="true"
+        android:importantForAccessibility="no"
+        android:scaleType="centerCrop"
+        android:visibility="gone"
+        />
+
+    <com.android.internal.widget.CachingIconView
+        android:id="@+id/icon"
+        android:layout_width="@dimen/notification_icon_circle_size"
+        android:layout_height="@dimen/notification_icon_circle_size"
+        android:layout_gravity="center_vertical|start"
+        android:layout_marginStart="@dimen/notification_icon_circle_start"
+        android:background="@drawable/notification_icon_circle"
+        android:padding="@dimen/notification_icon_circle_padding"
+        android:maxDrawableWidth="@dimen/notification_icon_circle_size"
+        android:maxDrawableHeight="@dimen/notification_icon_circle_size"
+        />
+
+    <FrameLayout
+        android:id="@+id/alternate_expand_target"
+        android:layout_width="@dimen/notification_content_margin_start"
+        android:layout_height="match_parent"
+        android:layout_gravity="start"
+        android:importantForAccessibility="no"
+        />
+
+    <LinearLayout
+        android:id="@+id/notification_headerless_view_row"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:layout_marginStart="@dimen/notification_content_margin_start"
+        android:orientation="horizontal"
+        >
+
+        <LinearLayout
+            android:id="@+id/notification_headerless_view_column"
+            android:layout_width="0px"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_weight="1"
+            android:layout_marginBottom="@dimen/notification_headerless_margin_twoline"
+            android:layout_marginTop="@dimen/notification_headerless_margin_twoline"
+            android:orientation="vertical"
+            >
+
+            <NotificationTopLineView
+                android:id="@+id/notification_top_line"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:minHeight="@dimen/notification_headerless_line_height"
+                android:clipChildren="false"
+                android:theme="@style/Theme.DeviceDefault.Notification"
+                >
+
+                <!--
+                NOTE: The notification_top_line_views layout contains the app_name_text.
+                In order to include the title view at the beginning, the Notification.Builder
+                has logic to hide that view whenever this title view is to be visible.
+                -->
+
+                <TextView
+                    android:id="@+id/title"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_marginEnd="@dimen/notification_header_separating_margin"
+                    android:ellipsize="end"
+                    android:fadingEdge="horizontal"
+                    android:singleLine="true"
+                    android:textAlignment="viewStart"
+                    android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Title"
+                    />
+
+                <include layout="@layout/notification_top_line_views" />
+
+            </NotificationTopLineView>
+
+            <LinearLayout
+                android:id="@+id/notification_main_column"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="vertical"
+                >
+
+                <com.android.internal.widget.NotificationVanishingFrameLayout
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:minHeight="@dimen/notification_headerless_line_height"
+                    >
+                    <!-- This is the simplest way to keep this text vertically centered without
+                     gravity="center_vertical" which causes jumpiness in expansion animations. -->
+                    <include
+                        layout="@layout/notification_template_text"
+                        android:layout_width="match_parent"
+                        android:layout_height="@dimen/notification_text_height"
+                        android:layout_gravity="center_vertical"
+                        android:layout_marginTop="0dp"
+                        />
+                </com.android.internal.widget.NotificationVanishingFrameLayout>
+
+                <include
+                    layout="@layout/notification_template_progress"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/notification_headerless_line_height"
+                    />
+
+            </LinearLayout>
+
+        </LinearLayout>
+
+        <com.android.internal.widget.CachingIconView
+            android:id="@+id/right_icon"
+            android:layout_width="@dimen/notification_right_icon_size"
+            android:layout_height="@dimen/notification_right_icon_size"
+            android:layout_gravity="center_vertical|end"
+            android:layout_marginTop="@dimen/notification_right_icon_headerless_margin"
+            android:layout_marginBottom="@dimen/notification_right_icon_headerless_margin"
+            android:layout_marginStart="@dimen/notification_right_icon_content_margin"
+            android:background="@drawable/notification_large_icon_outline"
+            android:clipToOutline="true"
+            android:importantForAccessibility="no"
+            android:scaleType="centerCrop"
+            android:maxDrawableWidth="@dimen/notification_right_icon_size"
+            android:maxDrawableHeight="@dimen/notification_right_icon_size"
+            />
+
+        <FrameLayout
+            android:id="@+id/expand_button_touch_container"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:minWidth="@dimen/notification_content_margin_end"
+            >
+
+            <include layout="@layout/notification_expand_button"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical|end"
+                />
+
+        </FrameLayout>
+
+    </LinearLayout>
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_base.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_base.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b9a3625f9e45210bf49bc09587d6fab9156fbf98
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_base.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:clipChildren="false"
+    android:tag="big"
+    >
+
+    <LinearLayout
+        android:id="@+id/notification_action_list_margin_target"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginBottom="@dimen/notification_content_margin"
+        android:orientation="vertical"
+        >
+
+        <FrameLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:layout_gravity="top"
+            >
+
+            <include layout="@layout/notification_template_header" />
+
+            <LinearLayout
+                android:id="@+id/notification_main_column"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginStart="@dimen/notification_content_margin_start"
+                android:layout_marginEnd="@dimen/notification_content_margin_end"
+                android:layout_marginTop="@dimen/notification_content_margin_top"
+                android:orientation="vertical"
+                >
+
+                <include layout="@layout/notification_template_part_line1" />
+
+                <include layout="@layout/notification_template_text_multiline" />
+
+                <include
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/notification_progress_bar_height"
+                    android:layout_marginTop="@dimen/notification_progress_margin_top"
+                    layout="@layout/notification_template_progress"
+                    />
+            </LinearLayout>
+
+            <include layout="@layout/notification_template_right_icon" />
+        </FrameLayout>
+
+        <ViewStub
+            android:layout="@layout/notification_material_reply_text"
+            android:id="@+id/notification_material_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            />
+
+        <include
+            layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            />
+
+        <include layout="@layout/notification_material_action_list" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_call.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_call.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1d5046777e77e87eab96fcb0245c7486abe4e5ca
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_call.xml
@@ -0,0 +1,107 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.CallLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipChildren="false"
+    android:tag="call"
+    android:theme="@style/Theme.DeviceDefault.Notification"
+    >
+
+    <!-- CallLayout shares visual appearance with ConversationLayout, so shares layouts -->
+    <include layout="@layout/notification_template_conversation_icon_container" />
+
+    <LinearLayout
+        android:id="@+id/notification_action_list_margin_target"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginBottom="@dimen/notification_content_margin"
+        android:orientation="vertical"
+        >
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:orientation="horizontal"
+            >
+
+            <LinearLayout
+                android:id="@+id/notification_main_column"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_weight="1"
+                android:layout_marginStart="@dimen/conversation_content_start"
+                android:orientation="vertical"
+                android:minHeight="68dp"
+                >
+
+                <include
+                    layout="@layout/notification_template_conversation_header"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    />
+
+                <include layout="@layout/notification_template_text_multiline" />
+
+                <include
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/notification_progress_bar_height"
+                    android:layout_marginTop="@dimen/notification_progress_margin_top"
+                    layout="@layout/notification_template_progress"
+                    />
+            </LinearLayout>
+
+            <FrameLayout
+                android:layout_width="wrap_content"
+                android:layout_height="match_parent"
+                android:minWidth="@dimen/notification_content_margin_end"
+                >
+
+                <include
+                    layout="@layout/notification_expand_button"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    />
+
+            </FrameLayout>
+
+        </LinearLayout>
+
+        <ViewStub
+            android:layout="@layout/notification_material_reply_text"
+            android:id="@+id/notification_material_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            />
+
+        <include
+            layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            />
+
+        <include layout="@layout/notification_material_action_list" />
+
+    </LinearLayout>
+
+</com.android.internal.widget.CallLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_media.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_media.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c304e766ac756b12795a3bc14ac4fceb026104d5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_media.xml
@@ -0,0 +1,109 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<!-- Layout for the expanded media notification -->
+<com.android.internal.widget.MediaNotificationView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:tag="bigMediaNarrow"
+    >
+
+    <include
+        layout="@layout/notification_template_header"
+        android:layout_width="match_parent"
+        android:layout_height="@dimen/media_notification_header_height"
+        />
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        android:id="@+id/notification_media_content"
+        >
+
+        <LinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/notification_content_margin_top"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:orientation="vertical"
+            >
+            <include layout="@layout/notification_template_part_line1"/>
+            <include layout="@layout/notification_template_text"/>
+        </LinearLayout>
+
+        <!-- this FrameLayout's minHeight serves as a padding for the content above -->
+        <FrameLayout
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="38dp"
+            android:minHeight="@dimen/notification_content_margin"
+            >
+            <!-- The layout_marginStart is selected to ensure that action icons which are visually
+                 12x12 in a 24x24 drawable will align correctly with the text.  This means that
+                 stock media action icons will align, but icons may be visually up to 20x20 and
+                 remain in-spec, in which case they will protrude into the column slightly. -->
+
+            <!-- Nesting in FrameLayout is required to ensure that the marginStart actually applies
+                 at the start instead of always the left, given that the media_actions LinearLayout
+                 has layoutDirection="ltr". -->
+            <LinearLayout
+                android:id="@+id/media_actions"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_marginBottom="@dimen/media_notification_actions_padding_bottom"
+                android:gravity="top"
+                android:orientation="horizontal"
+                android:layoutDirection="ltr"
+                >
+
+                <include
+                    layout="@layout/notification_material_media_action"
+                    android:id="@+id/action0"
+                    />
+
+                <include
+                    layout="@layout/notification_material_media_action"
+                    android:id="@+id/action1"
+                    />
+
+                <include
+                    layout="@layout/notification_material_media_action"
+                    android:id="@+id/action2"
+                    />
+
+                <include
+                    layout="@layout/notification_material_media_action"
+                    android:id="@+id/action3"
+                    />
+
+                <include
+                    layout="@layout/notification_material_media_action"
+                    android:id="@+id/action4"
+                    />
+            </LinearLayout>
+
+        </FrameLayout>
+
+    </LinearLayout>
+
+    <include layout="@layout/notification_template_right_icon" />
+
+</com.android.internal.widget.MediaNotificationView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_messaging.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_messaging.xml
new file mode 100644
index 0000000000000000000000000000000000000000..01c37b7515e95a879ad72c31e253d7b298d0114e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_messaging.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.MessagingLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipToPadding="false"
+    android:clipChildren="false"
+    android:tag="messaging"
+    >
+    <include layout="@layout/notification_template_header"/>
+    <com.android.internal.widget.RemeasuringLinearLayout
+            android:id="@+id/notification_action_list_margin_target"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="top"
+            android:layout_marginTop="@dimen/notification_content_margin_top"
+            android:clipChildren="false"
+            android:orientation="vertical">
+
+        <com.android.internal.widget.RemeasuringLinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="top"
+            android:layout_weight="1"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:orientation="vertical"
+            android:clipChildren="false"
+            >
+            <com.android.internal.widget.MessagingLinearLayout
+                android:id="@+id/notification_messaging"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:clipChildren="false"
+                android:spacing="@dimen/notification_messaging_spacing" />
+        </com.android.internal.widget.RemeasuringLinearLayout>
+        <include layout="@layout/notification_template_smart_reply_container"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="@dimen/notification_content_margin"
+                android:layout_marginStart="@dimen/notification_content_margin_start"
+                android:layout_marginEnd="@dimen/notification_content_margin_end" />
+        <include layout="@layout/notification_material_action_list" />
+    </com.android.internal.widget.RemeasuringLinearLayout>
+    <include layout="@layout/notification_template_right_icon" />
+</com.android.internal.widget.MessagingLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_picture.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_picture.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3d1ccfa5a14f3b819807178fc01582f387fd762f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_picture.xml
@@ -0,0 +1,93 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:tag="bigPicture"
+    android:clipChildren="false"
+    >
+
+    <include layout="@layout/notification_template_header" />
+
+    <include layout="@layout/notification_template_right_icon" />
+
+    <LinearLayout
+        android:id="@+id/notification_action_list_margin_target"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:layout_gravity="top"
+        android:layout_marginTop="@dimen/notification_content_margin_top"
+        android:clipToPadding="false"
+        android:orientation="vertical"
+        >
+
+        <LinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:orientation="vertical"
+            >
+
+            <include layout="@layout/notification_template_part_line1" />
+
+            <include
+                layout="@layout/notification_template_progress"
+                android:layout_width="match_parent"
+                android:layout_height="@dimen/notification_progress_bar_height"
+                android:layout_marginTop="@dimen/notification_progress_margin_top"
+                />
+
+            <include layout="@layout/notification_template_text_multiline" />
+        </LinearLayout>
+
+        <com.android.internal.widget.BigPictureNotificationImageView
+            android:id="@+id/big_picture"
+            android:layout_width="match_parent"
+            android:layout_height="0dp"
+            android:adjustViewBounds="true"
+            android:layout_weight="1"
+            android:layout_marginTop="13dp"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:background="@drawable/notification_big_picture_outline"
+            android:clipToOutline="true"
+            android:scaleType="centerCrop"
+            />
+
+        <ViewStub
+            android:layout="@layout/notification_material_reply_text"
+            android:id="@+id/notification_material_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            />
+
+        <include
+            layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            />
+
+        <include layout="@layout/notification_material_action_list" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_text.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..86e7dec29e7dfb8dec9bddd413f3f19950949445
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_big_text.xml
@@ -0,0 +1,94 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipChildren="false"
+    android:tag="bigText"
+    >
+
+    <include layout="@layout/notification_template_header" />
+
+    <com.android.internal.widget.RemeasuringLinearLayout
+        android:id="@+id/notification_action_list_margin_target"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_gravity="top"
+        android:layout_marginTop="@dimen/notification_content_margin_top"
+        android:layout_marginBottom="@dimen/notification_content_margin"
+        android:clipToPadding="false"
+        android:orientation="vertical"
+        >
+
+        <com.android.internal.widget.RemeasuringLinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="top"
+            android:paddingStart="@dimen/notification_content_margin_start"
+            android:paddingEnd="@dimen/notification_content_margin_end"
+            android:clipToPadding="false"
+            android:orientation="vertical"
+            android:layout_weight="1"
+            >
+
+            <include layout="@layout/notification_template_part_line1" />
+
+            <include
+                layout="@layout/notification_template_progress"
+                android:layout_width="match_parent"
+                android:layout_height="@dimen/notification_progress_bar_height"
+                android:layout_marginTop="@dimen/notification_progress_margin_top"
+                android:layout_marginBottom="6dp"
+                />
+
+            <com.android.internal.widget.ImageFloatingTextView
+                android:id="@+id/big_text"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="@dimen/notification_text_margin_top"
+                android:singleLine="false"
+                android:gravity="top"
+                android:visibility="gone"
+                android:textAlignment="viewStart"
+                />
+        </com.android.internal.widget.RemeasuringLinearLayout>
+
+        <ViewStub
+            android:layout="@layout/notification_material_reply_text"
+            android:id="@+id/notification_material_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            />
+
+        <include
+            layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            />
+
+        <include layout="@layout/notification_material_action_list" />
+    </com.android.internal.widget.RemeasuringLinearLayout>
+
+    <include layout="@layout/notification_template_right_icon" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_call.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_call.xml
new file mode 100644
index 0000000000000000000000000000000000000000..76bcc965f28b9f6732e951a829d1b550ffaa5b57
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_call.xml
@@ -0,0 +1,78 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2021 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.CallLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipChildren="false"
+    android:tag="call"
+    android:theme="@style/Theme.DeviceDefault.Notification"
+    >
+
+    <!-- CallLayout shares visual appearance with ConversationLayout, so shares layouts -->
+    <include layout="@layout/notification_template_conversation_icon_container" />
+
+    <LinearLayout
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:minHeight="88dp"
+        android:orientation="horizontal"
+        >
+
+        <LinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:layout_marginStart="@dimen/conversation_content_start"
+            android:orientation="vertical"
+            android:minHeight="68dp"
+            android:paddingBottom="@dimen/notification_headerless_margin_twoline"
+            >
+
+            <include
+                layout="@layout/notification_template_conversation_header"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                />
+
+            <include layout="@layout/notification_template_text"
+                android:layout_height="wrap_content"
+                android:minHeight="@dimen/notification_text_height"
+                />
+
+        </LinearLayout>
+
+        <FrameLayout
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:minWidth="@dimen/notification_content_margin_end"
+            >
+
+            <include
+                layout="@layout/notification_expand_button"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                />
+
+        </FrameLayout>
+
+    </LinearLayout>
+
+</com.android.internal.widget.CallLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_conversation.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_conversation.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ce8a904955727227db89f90328e9e9813588bf0b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_conversation.xml
@@ -0,0 +1,150 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.ConversationLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipChildren="false"
+    android:tag="conversation"
+    android:theme="@style/Theme.DeviceDefault.Notification"
+    >
+
+    <include layout="@layout/notification_template_conversation_icon_container" />
+
+    <!-- Wraps entire "expandable" notification -->
+    <com.android.internal.widget.RemeasuringLinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_gravity="top"
+        android:clipToPadding="false"
+        android:clipChildren="false"
+        android:orientation="vertical"
+        >
+        <!-- LinearLayout for Expand Button-->
+        <com.android.internal.widget.RemeasuringLinearLayout
+            android:id="@+id/expand_button_and_content_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:gravity="start|top"
+            android:orientation="horizontal"
+            android:clipChildren="false"
+            android:clipToPadding="false">
+            <!--TODO: move this into a separate layout and share logic with the header to bring back app opps etc-->
+            <com.android.internal.widget.RemeasuringLinearLayout
+                android:id="@+id/notification_action_list_margin_target"
+                android:layout_width="0dp"
+                android:orientation="vertical"
+                android:layout_height="wrap_content"
+                android:layout_weight="1">
+
+                <!-- Header -->
+
+                <!-- Use layout_marginStart instead of paddingStart to work around strange
+                     measurement behavior on lower display densities. -->
+                <include
+                    layout="@layout/notification_template_conversation_header"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_marginBottom="2dp"
+                    android:layout_marginStart="@dimen/conversation_content_start"
+                    />
+
+                <!-- Messages -->
+                <com.android.internal.widget.MessagingLinearLayout
+                    android:id="@+id/notification_messaging"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:minHeight="@dimen/notification_text_size"
+                    android:spacing="@dimen/notification_messaging_spacing"
+                    android:clipToPadding="false"
+                    android:clipChildren="false"
+                    />
+            </com.android.internal.widget.RemeasuringLinearLayout>
+
+            <!-- This is where the expand button container will be placed when collapsed-->
+        </com.android.internal.widget.RemeasuringLinearLayout>
+
+        <include layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/notification_content_margin"
+            android:layout_marginStart="@dimen/conversation_content_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end" />
+        <include layout="@layout/notification_material_action_list" />
+    </com.android.internal.widget.RemeasuringLinearLayout>
+
+    <!--expand_button_a11y_container ensures talkback focus order is correct when view is expanded.
+    The -1px of marginTop and 1px of paddingTop make sure expand_button_a11y_container is prior to
+    its sibling view in accessibility focus order.
+    {see android.view.ViewGroup.addChildrenForAccessibility()}
+    expand_button_container will be moved under expand_button_and_content_container when collapsed,
+    this dynamic movement ensures message can flow under expand button when expanded-->
+    <FrameLayout
+        android:id="@+id/expand_button_a11y_container"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:layout_gravity="end|top"
+        android:clipChildren="false"
+        android:clipToPadding="false"
+        android:layout_marginTop="-1px"
+        android:paddingTop="1px"
+        >
+        <!--expand_button_container is dynamically placed between here and at the end of the
+        layout. It starts here since only FrameLayout layout params have gravity-->
+        <FrameLayout
+            android:id="@+id/expand_button_container"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_gravity="end|top"
+            android:clipChildren="false"
+            android:clipToPadding="false">
+            <!--expand_button_touch_container makes sure that we can nicely center the expand
+            content in the collapsed layout while the parent makes sure that we're never laid out
+            bigger than the messaging content.-->
+            <LinearLayout
+                android:id="@+id/expand_button_touch_container"
+                android:layout_width="wrap_content"
+                android:layout_height="@dimen/conversation_expand_button_height"
+                android:orientation="horizontal"
+                android:layout_gravity="end|top"
+                android:paddingEnd="0dp"
+                android:clipToPadding="false"
+                android:clipChildren="false"
+                >
+                <!-- Images -->
+                <com.android.internal.widget.MessagingLinearLayout
+                    android:id="@+id/conversation_image_message_container"
+                    android:forceHasOverlappingRendering="false"
+                    android:layout_width="40dp"
+                    android:layout_height="40dp"
+                    android:layout_marginStart="@dimen/conversation_image_start_margin"
+                    android:spacing="0dp"
+                    android:layout_gravity="center"
+                    android:clipToPadding="false"
+                    android:clipChildren="false"
+                    />
+                <include layout="@layout/notification_expand_button"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_gravity="center"
+                    />
+            </LinearLayout>
+        </FrameLayout>
+    </FrameLayout>
+</com.android.internal.widget.ConversationLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_heads_up_base.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_heads_up_base.xml
new file mode 100644
index 0000000000000000000000000000000000000000..34d7118b4508ff011f18dfa1927d7db7c53d74f0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_heads_up_base.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:clipChildren="false"
+    android:tag="headsUp"
+    >
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:clipChildren="false"
+        android:orientation="vertical"
+        >
+
+        <include
+            layout="@layout/notification_template_material_base"
+            android:id="@null"
+            />
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="-20dp"
+            android:clipChildren="false"
+            android:orientation="vertical"
+            >
+
+            <ViewStub
+                android:layout="@layout/notification_material_reply_text"
+                android:id="@+id/notification_material_reply_container"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                />
+
+            <include
+                layout="@layout/notification_template_smart_reply_container"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginStart="@dimen/notification_content_margin_start"
+                android:layout_marginEnd="@dimen/notification_content_margin_end"
+                android:layout_marginTop="@dimen/notification_content_margin"
+                />
+
+            <include layout="@layout/notification_material_action_list" />
+        </LinearLayout>
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_inbox.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_inbox.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e6fa50336e00ca4ee64056116f365284cb628b42
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_inbox.xml
@@ -0,0 +1,131 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:tag="inbox"
+    android:clipChildren="false"
+    >
+    <include layout="@layout/notification_template_header" />
+    <LinearLayout
+            android:id="@+id/notification_action_list_margin_target"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:layout_gravity="top"
+            android:layout_marginTop="@dimen/notification_content_margin_top"
+            android:clipToPadding="false"
+            android:orientation="vertical">
+
+        <LinearLayout
+            android:id="@+id/notification_main_column"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="top"
+            android:paddingStart="@dimen/notification_content_margin_start"
+            android:paddingEnd="@dimen/notification_content_margin_end"
+            android:layout_weight="1"
+            android:clipToPadding="false"
+            android:orientation="vertical"
+            >
+            <include layout="@layout/notification_template_part_line1"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content" />
+            <include layout="@layout/notification_template_progress"
+                android:layout_width="match_parent"
+                android:layout_height="@dimen/notification_progress_bar_height"
+                android:layout_marginTop="@dimen/notification_progress_margin_top"
+                android:layout_marginBottom="2dp"/>
+            <TextView android:id="@+id/inbox_text0"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text1"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text2"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text3"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text4"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text5"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+            <TextView android:id="@+id/inbox_text6"
+                style="@style/Widget.DeviceDefault.Notification.Text"
+                android:layout_width="match_parent"
+                android:layout_height="0dp"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:visibility="gone"
+                android:layout_weight="1"
+                />
+        </LinearLayout>
+        <ViewStub android:layout="@layout/notification_material_reply_text"
+                android:id="@+id/notification_material_reply_container"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content" />
+        <include layout="@layout/notification_template_smart_reply_container"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="@dimen/notification_content_margin_start"
+            android:layout_marginEnd="@dimen/notification_content_margin_end"
+            android:layout_marginTop="@dimen/notification_content_margin" />
+        <include layout="@layout/notification_material_action_list" />
+    </LinearLayout>
+    <include layout="@layout/notification_template_right_icon" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_media.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_media.xml
new file mode 100644
index 0000000000000000000000000000000000000000..df32d30918c89317636a66430c6831004442c966
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_media.xml
@@ -0,0 +1,193 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<com.android.internal.widget.MediaNotificationView
+    android:id="@+id/status_bar_latest_event_content"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="@dimen/notification_min_height"
+    android:tag="media"
+    >
+
+
+    <ImageView
+        android:id="@+id/left_icon"
+        android:layout_width="@dimen/notification_left_icon_size"
+        android:layout_height="@dimen/notification_left_icon_size"
+        android:layout_gravity="center_vertical|start"
+        android:layout_marginStart="@dimen/notification_left_icon_start"
+        android:background="@drawable/notification_large_icon_outline"
+        android:clipToOutline="true"
+        android:importantForAccessibility="no"
+        android:scaleType="centerCrop"
+        android:visibility="gone"
+        />
+
+    <com.android.internal.widget.CachingIconView
+        android:id="@+id/icon"
+        android:layout_width="@dimen/notification_icon_circle_size"
+        android:layout_height="@dimen/notification_icon_circle_size"
+        android:layout_gravity="center_vertical|start"
+        android:layout_marginStart="@dimen/notification_icon_circle_start"
+        android:background="@drawable/notification_icon_circle"
+        android:padding="@dimen/notification_icon_circle_padding"
+        />
+
+    <FrameLayout
+        android:id="@+id/alternate_expand_target"
+        android:layout_width="@dimen/notification_content_margin_start"
+        android:layout_height="match_parent"
+        android:layout_gravity="start"
+        android:importantForAccessibility="no"
+        />
+
+    <LinearLayout
+        android:id="@+id/notification_headerless_view_row"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:layout_marginStart="@dimen/notification_content_margin_start"
+        android:orientation="horizontal"
+        >
+
+        <LinearLayout
+            android:id="@+id/notification_headerless_view_column"
+            android:layout_width="0px"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_weight="1"
+            android:layout_marginBottom="@dimen/notification_headerless_margin_twoline"
+            android:layout_marginTop="@dimen/notification_headerless_margin_twoline"
+            android:orientation="vertical"
+            >
+
+            <NotificationTopLineView
+                android:id="@+id/notification_top_line"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:minHeight="@dimen/notification_headerless_line_height"
+                android:clipChildren="false"
+                android:theme="@style/Theme.DeviceDefault.Notification"
+                >
+
+                <!--
+                NOTE: The notification_top_line_views layout contains the app_name_text.
+                In order to include the title view at the beginning, the Notification.Builder
+                has logic to hide that view whenever this title view is to be visible.
+                -->
+
+                <TextView
+                    android:id="@+id/title"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_marginEnd="@dimen/notification_header_separating_margin"
+                    android:ellipsize="end"
+                    android:fadingEdge="horizontal"
+                    android:singleLine="true"
+                    android:textAlignment="viewStart"
+                    android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Title"
+                    />
+
+                <include layout="@layout/notification_top_line_views" />
+
+            </NotificationTopLineView>
+
+            <LinearLayout
+                android:id="@+id/notification_main_column"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="vertical"
+                >
+
+                <com.android.internal.widget.NotificationVanishingFrameLayout
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/notification_headerless_line_height"
+                    >
+                    <!-- This is the simplest way to keep this text vertically centered without
+                     gravity="center_vertical" which causes jumpiness in expansion animations. -->
+                    <include
+                        layout="@layout/notification_template_text"
+                        android:layout_width="match_parent"
+                        android:layout_height="@dimen/notification_text_height"
+                        android:layout_gravity="center_vertical"
+                        android:layout_marginTop="0dp"
+                        />
+                </com.android.internal.widget.NotificationVanishingFrameLayout>
+
+                <include
+                    layout="@layout/notification_template_progress"
+                    android:layout_width="match_parent"
+                    android:layout_height="@dimen/notification_headerless_line_height"
+                    />
+
+            </LinearLayout>
+
+        </LinearLayout>
+
+        <ImageView
+            android:id="@+id/right_icon"
+            android:layout_width="@dimen/notification_right_icon_size"
+            android:layout_height="@dimen/notification_right_icon_size"
+            android:layout_gravity="center_vertical|end"
+            android:layout_marginTop="@dimen/notification_right_icon_headerless_margin"
+            android:layout_marginBottom="@dimen/notification_right_icon_headerless_margin"
+            android:layout_marginStart="@dimen/notification_right_icon_content_margin"
+            android:background="@drawable/notification_large_icon_outline"
+            android:clipToOutline="true"
+            android:importantForAccessibility="no"
+            android:scaleType="centerCrop"
+            />
+
+        <LinearLayout
+            android:id="@+id/media_actions"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layoutDirection="ltr"
+            android:orientation="horizontal"
+            >
+            <include
+                layout="@layout/notification_material_media_action"
+                android:id="@+id/action0"
+                />
+            <include
+                layout="@layout/notification_material_media_action"
+                android:id="@+id/action1"
+                />
+            <include
+                layout="@layout/notification_material_media_action"
+                android:id="@+id/action2"
+                />
+        </LinearLayout>
+
+        <FrameLayout
+            android:id="@+id/expand_button_touch_container"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:minWidth="@dimen/notification_content_margin_end"
+            >
+
+            <include layout="@layout/notification_expand_button"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical|end"
+                />
+
+        </FrameLayout>
+
+    </LinearLayout>
+</com.android.internal.widget.MediaNotificationView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_material_messaging.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_messaging.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3e82bd1814c6c33079f73c4932f1943f5a4c5dbf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_material_messaging.xml
@@ -0,0 +1,215 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.MessagingLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:clipChildren="false"
+    android:tag="messaging"
+    >
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:clipChildren="false"
+        android:orientation="vertical"
+        >
+
+
+        <com.android.internal.widget.NotificationMaxHeightFrameLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:minHeight="@dimen/notification_min_height"
+            android:clipChildren="false"
+            >
+
+            <ImageView
+                android:id="@+id/left_icon"
+                android:layout_width="@dimen/notification_left_icon_size"
+                android:layout_height="@dimen/notification_left_icon_size"
+                android:layout_gravity="center_vertical|start"
+                android:layout_marginStart="@dimen/notification_left_icon_start"
+                android:background="@drawable/notification_large_icon_outline"
+                android:clipToOutline="true"
+                android:importantForAccessibility="no"
+                android:scaleType="centerCrop"
+                android:visibility="gone"
+                />
+
+            <com.android.internal.widget.CachingIconView
+                android:id="@+id/icon"
+                android:layout_width="@dimen/notification_icon_circle_size"
+                android:layout_height="@dimen/notification_icon_circle_size"
+                android:layout_gravity="center_vertical|start"
+                android:layout_marginStart="@dimen/notification_icon_circle_start"
+                android:background="@drawable/notification_icon_circle"
+                android:padding="@dimen/notification_icon_circle_padding"
+                />
+
+            <FrameLayout
+                android:id="@+id/alternate_expand_target"
+                android:layout_width="@dimen/notification_content_margin_start"
+                android:layout_height="match_parent"
+                android:layout_gravity="start"
+                android:importantForAccessibility="no"
+                />
+
+            <!--
+              NOTE: to make the expansion animation of id/notification_messaging happen vertically,
+              its X positioning must be the left edge of the notification, so instead of putting the
+              layout_marginStart on the id/notification_headerless_view_row, we put it on
+              id/notification_top_line, making the layout here just a bit different from the base.
+              -->
+            <LinearLayout
+                android:id="@+id/notification_headerless_view_row"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:orientation="horizontal"
+                android:clipChildren="false"
+                >
+
+                <!--
+                  NOTE: because messaging will always have 2 lines, this LinearLayout should NOT
+                  have the id/notification_headerless_view_column, as that is used for modifying
+                   vertical margins to accommodate the single-line state that base supports
+                  -->
+                <LinearLayout
+                    android:layout_width="0px"
+                    android:layout_height="wrap_content"
+                    android:layout_gravity="center_vertical"
+                    android:layout_weight="1"
+                    android:layout_marginBottom="@dimen/notification_headerless_margin_twoline"
+                    android:layout_marginTop="@dimen/notification_headerless_margin_twoline"
+                    android:clipChildren="false"
+                    android:orientation="vertical"
+                    >
+
+                    <NotificationTopLineView
+                        android:id="@+id/notification_top_line"
+                        android:layout_width="wrap_content"
+                        android:layout_height="wrap_content"
+                        android:minHeight="@dimen/notification_headerless_line_height"
+                        android:layout_marginStart="@dimen/notification_content_margin_start"
+                        android:clipChildren="false"
+                        android:theme="@style/Theme.DeviceDefault.Notification"
+                        >
+
+                        <!--
+                        NOTE: The notification_top_line_views layout contains the app_name_text.
+                        In order to include the title view at the beginning, the Notification.Builder
+                        has logic to hide that view whenever this title view is to be visible.
+                        -->
+
+                        <TextView
+                            android:id="@+id/title"
+                            android:layout_width="wrap_content"
+                            android:layout_height="wrap_content"
+                            android:layout_marginEnd="@dimen/notification_header_separating_margin"
+                            android:ellipsize="end"
+                            android:fadingEdge="horizontal"
+                            android:singleLine="true"
+                            android:textAlignment="viewStart"
+                            android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Title"
+                            />
+
+                        <include layout="@layout/notification_top_line_views" />
+
+                    </NotificationTopLineView>
+
+                    <LinearLayout
+                        android:id="@+id/notification_main_column"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:orientation="vertical"
+                        android:clipChildren="false"
+                        >
+                        <com.android.internal.widget.MessagingLinearLayout
+                            android:id="@+id/notification_messaging"
+                            android:layout_width="match_parent"
+                            android:layout_height="wrap_content"
+                            android:clipChildren="false"
+                            android:spacing="@dimen/notification_messaging_spacing" />
+                    </LinearLayout>
+
+                </LinearLayout>
+
+                <!-- Images -->
+                <com.android.internal.widget.MessagingLinearLayout
+                    android:id="@+id/conversation_image_message_container"
+                    android:layout_width="@dimen/notification_right_icon_size"
+                    android:layout_height="@dimen/notification_right_icon_size"
+                    android:layout_gravity="center_vertical|end"
+                    android:layout_marginTop="@dimen/notification_right_icon_headerless_margin"
+                    android:layout_marginBottom="@dimen/notification_right_icon_headerless_margin"
+                    android:layout_marginStart="@dimen/notification_right_icon_content_margin"
+                    android:forceHasOverlappingRendering="false"
+                    android:spacing="0dp"
+                    android:clipChildren="false"
+                    android:visibility="gone"
+                    />
+
+                <ImageView
+                    android:id="@+id/right_icon"
+                    android:layout_width="@dimen/notification_right_icon_size"
+                    android:layout_height="@dimen/notification_right_icon_size"
+                    android:layout_gravity="center_vertical|end"
+                    android:layout_marginTop="@dimen/notification_right_icon_headerless_margin"
+                    android:layout_marginBottom="@dimen/notification_right_icon_headerless_margin"
+                    android:layout_marginStart="@dimen/notification_right_icon_content_margin"
+                    android:background="@drawable/notification_large_icon_outline"
+                    android:clipToOutline="true"
+                    android:importantForAccessibility="no"
+                    android:scaleType="centerCrop"
+                    />
+
+                <FrameLayout
+                    android:id="@+id/expand_button_touch_container"
+                    android:layout_width="wrap_content"
+                    android:layout_height="match_parent"
+                    android:minWidth="@dimen/notification_content_margin_end"
+                    >
+
+                    <include layout="@layout/notification_expand_button"
+                        android:layout_width="wrap_content"
+                        android:layout_height="wrap_content"
+                        android:layout_gravity="center_vertical|end"
+                        />
+
+                </FrameLayout>
+
+            </LinearLayout>
+
+        </com.android.internal.widget.NotificationMaxHeightFrameLayout>
+
+    <LinearLayout
+            android:id="@+id/notification_action_list_margin_target"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="-20dp"
+            android:clipChildren="false"
+            android:orientation="vertical">
+        <include layout="@layout/notification_template_smart_reply_container"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="@dimen/notification_content_margin"
+                android:layout_marginStart="@dimen/notification_content_margin_start"
+                android:layout_marginEnd="@dimen/notification_content_margin_end" />
+        <include layout="@layout/notification_material_action_list" />
+    </LinearLayout>
+</LinearLayout>
+</com.android.internal.widget.MessagingLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_group.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_group.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5e3b657353b6d2c0418c2b8db9c99651a51b4023
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_group.xml
@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.MessagingGroup
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal" >
+    <FrameLayout
+        android:id="@+id/message_icon_container"
+        android:layout_width="@dimen/conversation_content_start"
+        android:layout_height="wrap_content">
+        <ImageView
+            android:layout_gravity="top|center_horizontal"
+            android:id="@+id/message_icon"
+            android:layout_width="@dimen/messaging_avatar_size"
+            android:layout_height="@dimen/messaging_avatar_size"
+            android:scaleType="centerCrop"
+            android:importantForAccessibility="no" />
+    </FrameLayout>
+    <com.android.internal.widget.RemeasuringLinearLayout
+        android:id="@+id/messaging_group_content_container"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:baselineAligned="true"
+        android:orientation="vertical">
+        <com.android.internal.widget.ImageFloatingTextView
+            android:id="@+id/message_name"
+            style="@style/Widget.DeviceDefault.Notification.MessagingName"
+            android:layout_width="wrap_content"
+            android:textAlignment="viewStart"
+        />
+        <com.android.internal.widget.MessagingLinearLayout
+            android:id="@+id/group_message_container"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/notification_text_margin_top"
+            android:spacing="2dp" />
+    </com.android.internal.widget.RemeasuringLinearLayout>
+    <FrameLayout
+        android:id="@+id/messaging_group_icon_container"
+        android:layout_width="@dimen/messaging_avatar_size"
+        android:layout_height="@dimen/messaging_avatar_size"
+        android:layout_marginStart="12dp"
+        android:visibility="gone"/>
+    <FrameLayout
+        android:id="@+id/messaging_group_sending_progress_container"
+        android:layout_width="@dimen/messaging_group_sending_progress_size"
+        android:layout_height="@dimen/messaging_avatar_size"
+        android:layout_marginStart="12dp"
+        android:layout_gravity="top"
+        android:visibility="gone">
+        <ProgressBar
+            android:id="@+id/messaging_group_sending_progress"
+            android:layout_height="@dimen/messaging_group_sending_progress_size"
+            android:layout_width="@dimen/messaging_group_sending_progress_size"
+            android:layout_gravity="center"
+            android:indeterminate="true"
+            style="?android:attr/progressBarStyleSmall" />
+    </FrameLayout>
+</com.android.internal.widget.MessagingGroup>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_image_message.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_image_message.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6ca4dcdd7c9b0012b60faf4856e11e88dd960695
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_image_message.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2018 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.MessagingImageMessage
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/message_text"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_marginTop="@dimen/messaging_image_extra_spacing"
+    android:scaleType="fitStart"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_text_message.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_text_message.xml
new file mode 100644
index 0000000000000000000000000000000000000000..26c081e1f3d7809b0a282cf48b5b68c4a34dcf25
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_messaging_text_message.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2017 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.MessagingTextMessage
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/message_text"
+    android:textAlignment="viewStart"
+    style="@style/Widget.DeviceDefault.Notification.MessagingText"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_part_chronometer.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_part_chronometer.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e4ebc76c113a50090f30e86e0bb002d4b1c0193b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_part_chronometer.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2012 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<Chronometer android:id="@+id/chronometer" xmlns:android="http://schemas.android.com/apk/res/android"
+    android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Time"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_marginEnd="4dp"
+    android:layout_weight="0"
+    android:singleLine="true"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_part_line1.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_part_line1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ca8fe7908e141b151ced4b1768d5c7c7de0729bc
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_part_line1.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<TextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/title"
+    android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.BigTitle"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:maxLines="2"
+    android:ellipsize="end"
+    android:textAlignment="viewStart"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_progress.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_progress.xml
new file mode 100644
index 0000000000000000000000000000000000000000..85532add78611de11c8d3c3283c8d05ed175b15b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_progress.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2015 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<ViewStub
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/progress"
+    android:layout="@layout/notification_template_progressbar"
+    android:layout_width="match_parent"
+    android:layout_height="15dp"
+    android:visibility="gone"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_progressbar.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_progressbar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..98e2c03a43763583490c2d8a3f839c561958a152
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_progressbar.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2014 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<ProgressBar xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/progress"
+    android:layout_width="match_parent"
+    android:layout_height="@dimen/notification_progress_bar_height"
+    style="@style/Widget.Material.Light.ProgressBar.Horizontal"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_right_icon.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_right_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8b3b795f74739ac2152bfa19dde6ae4212ed1158
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_right_icon.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2015 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.CachingIconView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/right_icon"
+    android:layout_width="@dimen/notification_right_icon_size"
+    android:layout_height="@dimen/notification_right_icon_size"
+    android:layout_gravity="top|end"
+    android:layout_marginEnd="@dimen/notification_header_expand_icon_size"
+    android:layout_marginTop="@dimen/notification_right_icon_big_margin_top"
+    android:background="@drawable/notification_large_icon_outline"
+    android:clipToOutline="true"
+    android:importantForAccessibility="no"
+    android:scaleType="centerCrop"
+    android:maxDrawableWidth="@dimen/notification_right_icon_size"
+    android:maxDrawableHeight="@dimen/notification_right_icon_size"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_smart_reply_container.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_smart_reply_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..637241eba982acf2f9950e332a7edc0a6f6bc766
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_smart_reply_container.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2017 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:id="@+id/smart_reply_container"
+              android:visibility="gone"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:orientation="horizontal">
+    <!-- SmartReplyView will be added here. -->
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_text.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7b834a4eca112bc4407597c7e81504182786c422
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_text.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2016 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.ImageFloatingTextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@style/Widget.DeviceDefault.Notification.Text"
+    android:id="@+id/text"
+    android:layout_width="match_parent"
+    android:layout_height="@dimen/notification_text_height"
+    android:layout_gravity="top"
+    android:layout_marginTop="@dimen/notification_text_margin_top"
+    android:ellipsize="end"
+    android:fadingEdge="horizontal"
+    android:gravity="top"
+    android:singleLine="true"
+    android:textAlignment="viewStart"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_template_text_multiline.xml b/android-sdk/platforms/android-34/data/res/layout/notification_template_text_multiline.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ec493bcc5082a09ac4e53ce44b62ad524aea4dde
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_template_text_multiline.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<com.android.internal.widget.ImageFloatingTextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@style/Widget.DeviceDefault.Notification.Text"
+    android:id="@+id/text"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_gravity="top"
+    android:layout_marginTop="@dimen/notification_text_margin_top"
+    android:minHeight="@dimen/notification_text_height"
+    android:ellipsize="end"
+    android:fadingEdge="horizontal"
+    android:gravity="top"
+    android:maxLines="2"
+    android:textAlignment="viewStart"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/notification_top_line_views.xml b/android-sdk/platforms/android-34/data/res/layout/notification_top_line_views.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8284279be3a024ed8353516e5ff4d5d6e847101b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/notification_top_line_views.xml
@@ -0,0 +1,159 @@
+<?xml version="1.0" encoding="utf-8"?><!--
+  ~ Copyright (C) 2015 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<!--
+ This layout file should be included inside a NotificationTopLineView, sometimes after a
+ <TextView android:id="@+id/title"/>
+-->
+<merge
+    xmlns:android="http://schemas.android.com/apk/res/android">
+
+    <TextView
+        android:id="@+id/app_name_text"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:singleLine="true"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:visibility="?attr/notificationHeaderAppNameVisibility"
+        />
+
+    <TextView
+        android:id="@+id/header_text_secondary_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:visibility="gone"
+        />
+
+    <TextView
+        android:id="@+id/header_text_secondary"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:visibility="gone"
+        android:singleLine="true"
+        />
+
+    <TextView
+        android:id="@+id/header_text_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:visibility="gone"
+        />
+
+    <TextView
+        android:id="@+id/header_text"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:visibility="gone"
+        android:singleLine="true"
+        />
+
+    <TextView
+        android:id="@+id/time_divider"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Info"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:text="@string/notification_header_divider_symbol"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <DateTimeView
+        android:id="@+id/time"
+        android:textAppearance="@style/TextAppearance.DeviceDefault.Notification.Time"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:showRelative="true"
+        android:singleLine="true"
+        android:visibility="gone"
+        />
+
+    <ViewStub
+        android:id="@+id/chronometer"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:layout_marginEnd="@dimen/notification_header_separating_margin"
+        android:layout="@layout/notification_template_part_chronometer"
+        android:visibility="gone"
+        />
+
+    <ImageButton
+        android:id="@+id/feedback"
+        android:layout_width="@dimen/notification_feedback_size"
+        android:layout_height="@dimen/notification_feedback_size"
+        android:layout_marginStart="@dimen/notification_header_separating_margin"
+        android:baseline="13dp"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_feedback_indicator"
+        android:background="?android:selectableItemBackgroundBorderless"
+        android:visibility="gone"
+        android:contentDescription="@string/notification_feedback_indicator"
+        />
+
+    <ImageView
+        android:id="@+id/phishing_alert"
+        android:layout_width="@dimen/notification_phishing_alert_size"
+        android:layout_height="@dimen/notification_phishing_alert_size"
+        android:layout_marginStart="4dp"
+        android:baseline="10dp"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_dialog_alert_material"
+        android:visibility="gone"
+        android:contentDescription="@string/notification_phishing_alert_content_description"
+        />
+
+    <ImageView
+        android:id="@+id/profile_badge"
+        android:layout_width="@dimen/notification_badge_size"
+        android:layout_height="@dimen/notification_badge_size"
+        android:layout_marginStart="4dp"
+        android:baseline="10dp"
+        android:scaleType="fitCenter"
+        android:visibility="gone"
+        android:contentDescription="@string/notification_work_profile_content_description"
+        />
+
+    <ImageView
+        android:id="@+id/alerted_icon"
+        android:layout_width="@dimen/notification_alerted_size"
+        android:layout_height="@dimen/notification_alerted_size"
+        android:layout_marginStart="4dp"
+        android:baseline="10dp"
+        android:contentDescription="@string/notification_alerted_content_description"
+        android:scaleType="fitCenter"
+        android:src="@drawable/ic_notifications_alerted"
+        android:visibility="gone"
+        />
+</merge>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/number_picker.xml b/android-sdk/platforms/android-34/data/res/layout/number_picker.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b7e7ae14673033c7d88146d243347e61d3657bc6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/number_picker.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+
+    <ImageButton android:id="@+id/increment"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:background="@android:drawable/numberpicker_up_btn"
+        android:paddingTop="22dip"
+        android:paddingBottom="22dip"
+        android:contentDescription="@string/number_picker_increment_button" />
+
+    <EditText
+        android:id="@+id/numberpicker_input"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:textAppearance="@style/TextAppearance.Large.Inverse.NumberPickerInputText"
+        android:gravity="center"
+        android:singleLine="true"
+        android:background="@drawable/numberpicker_input" />
+
+    <ImageButton android:id="@+id/decrement"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:background="@android:drawable/numberpicker_down_btn"
+        android:paddingTop="22dip"
+        android:paddingBottom="22dip"
+        android:contentDescription="@string/number_picker_decrement_button" />
+
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/number_picker_material.xml b/android-sdk/platforms/android-34/data/res/layout/number_picker_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6fbd2b279f0c1eee5b38ff199dcdc3ed8348b133
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/number_picker_material.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<view xmlns:android="http://schemas.android.com/apk/res/android"
+      class="android.widget.NumberPicker$CustomEditText"
+      android:id="@+id/numberpicker_input"
+      android:layout_width="fill_parent"
+      android:layout_height="wrap_content"
+      android:gravity="center"
+      android:singleLine="true"
+      android:background="@null"
+      android:textAppearance="@style/TextAppearance.Material.NumberPicker" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/number_picker_with_selector_wheel.xml b/android-sdk/platforms/android-34/data/res/layout/number_picker_with_selector_wheel.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c8fa0f7b21801117cea56f54c8fc420967da73b7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/number_picker_with_selector_wheel.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2012, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+
+    <view class="android.widget.NumberPicker$CustomEditText"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:id="@+id/numberpicker_input"
+        android:layout_width="fill_parent"
+        android:layout_height="wrap_content"
+        android:gravity="center"
+        android:singleLine="true"
+        android:background="@null" />
+
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/overlay_display_window.xml b/android-sdk/platforms/android-34/data/res/layout/overlay_display_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..36b4a0da294e109b61262de67bf2e85e75776c6d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/overlay_display_window.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2012 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+      android:layout_width="match_parent"
+      android:layout_height="match_parent"
+      android:background="#000000">
+    <TextureView android:id="@+id/overlay_display_window_texture"
+               android:layout_width="0px"
+               android:layout_height="0px" />
+    <TextView android:id="@+id/overlay_display_window_title"
+               android:layout_width="wrap_content"
+               android:layout_height="wrap_content"
+               android:layout_gravity="top|center_horizontal" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/permissions_account_and_authtokentype.xml b/android-sdk/platforms/android-34/data/res/layout/permissions_account_and_authtokentype.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ac5b08a32a3a98c47399812fcb4fd69ab29b9780
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/permissions_account_and_authtokentype.xml
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+  Defines the layout of an account and authtoken type permission item.
+  Contains an icon, the account type and name and the authtoken type.
+-->
+
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <ImageView
+        android:id="@+id/permission_icon"
+        android:layout_width="30dip"
+        android:layout_height="30dip"
+        android:drawable="@drawable/ic_bullet_key_permission"
+        android:layout_alignParentStart="true"
+        android:scaleType="fitCenter" />
+
+
+    <TextView
+        android:id="@+id/account_type"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:textStyle="bold"
+        android:paddingStart="6dip"
+        android:layout_toEndOf="@id/permission_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <TextView
+        android:id="@+id/account_name"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:layout_marginTop="-4dip"
+        android:paddingBottom="8dip"
+        android:paddingStart="6dip"
+        android:layout_below="@id/account_type"
+        android:layout_toEndOf="@id/permission_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <TextView
+        android:id="@+id/authtoken_type"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:layout_marginTop="-4dip"
+        android:paddingBottom="8dip"
+        android:paddingStart="6dip"
+        android:layout_below="@id/account_name"
+        android:layout_toEndOf="@id/permission_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/permissions_package_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/permissions_package_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..75ce0a789f144f70acc1752ccac753123117eee4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/permissions_package_list_item.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+  Defines the layout of a single package item.
+  Contains a bullet point icon and the name of the package.
+-->
+
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <ImageView
+        android:id="@+id/package_icon"
+        android:layout_width="30dip"
+        android:layout_height="30dip"
+        android:layout_alignParentStart="true"
+        android:src="@drawable/ic_text_dot"
+        android:scaleType="fitCenter" />
+
+
+    <TextView
+        android:id="@+id/package_label"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:textStyle="bold"
+        android:paddingStart="6dip"
+        android:layout_toEndOf="@id/package_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/platlogo_layout.xml b/android-sdk/platforms/android-34/data/res/layout/platlogo_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4a4ad751e421e554a45ad9d6ae8ea56ecfa7ffdb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/platlogo_layout.xml
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:clipChildren="false"
+    android:background="@android:color/transparent">
+    <ImageView
+        android:id="@+id/text"
+        android:layout_width="400dp"
+        android:layout_height="wrap_content"
+        android:translationY="-100dp"
+        android:adjustViewBounds="true"
+        android:layout_marginBottom="-80dp"
+        android:layout_centerInParent="true"
+        android:src="@drawable/android_logotype"
+        android:tint="?android:attr/textColorPrimary"
+        />
+    <ImageView
+        android:id="@+id/one"
+        android:layout_width="200dp"
+        android:layout_height="200dp"
+        android:layout_marginLeft="24dp"
+        android:layout_below="@id/text"
+        android:layout_alignLeft="@id/text"
+        android:tint="?android:attr/textColorPrimary"
+        />
+    <ImageView
+        android:id="@+id/zero"
+        android:layout_width="200dp"
+        android:layout_height="200dp"
+        android:layout_marginRight="34dp"
+        android:layout_below="@id/text"
+        android:layout_alignRight="@id/text"
+        android:tint="?android:attr/textColorPrimary"
+        />
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/popup_menu_header_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/popup_menu_header_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5879f85fbd6cd8d5eddc73a20196cf8c5e52ab1f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/popup_menu_header_item_layout.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="?attr/dropdownListPreferredItemHeight"
+    android:minWidth="196dip"
+    android:paddingStart="16dip"
+    android:paddingEnd="16dip">
+
+    <TextView
+        android:id="@+id/title"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:textAppearance="?attr/textAppearancePopupMenuHeader"
+        android:layout_gravity="center_vertical"
+        android:singleLine="true"
+        android:ellipsize="marquee"
+        android:fadingEdge="horizontal"
+        android:textAlignment="viewStart" />
+
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/popup_menu_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/popup_menu_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1be915e809e628e8357817104fbd9ed66bc25954
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/popup_menu_item_layout.xml
@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<com.android.internal.view.menu.ListMenuItemView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minWidth="196dip"
+    android:orientation="vertical" >
+
+    <ImageView
+        android:id="@+id/group_divider"
+        android:layout_width="match_parent"
+        android:layout_height="1dip"
+        android:layout_marginTop="4dip"
+        android:layout_marginBottom="4dip"
+        android:background="@drawable/list_divider_material" />
+
+    <LinearLayout
+        android:id="@+id/content"
+        android:layout_width="match_parent"
+        android:layout_height="?attr/dropdownListPreferredItemHeight"
+        android:paddingEnd="16dip"
+        android:duplicateParentState="true" >
+
+        <!-- Icon will be inserted here. -->
+
+        <!-- The title and summary have some gap between them,
+        and this 'group' should be centered vertically. -->
+        <RelativeLayout
+            android:layout_width="0dip"
+            android:layout_weight="1"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="16dip"
+            android:duplicateParentState="true">
+
+            <TextView
+                android:id="@+id/title"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_alignParentTop="true"
+                android:layout_alignParentStart="true"
+                android:textAppearance="?attr/textAppearanceLargePopupMenu"
+                android:singleLine="true"
+                android:duplicateParentState="true"
+                android:ellipsize="marquee"
+                android:fadingEdge="horizontal"
+                android:textAlignment="viewStart" />
+
+            <TextView
+                android:id="@+id/shortcut"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_below="@id/title"
+                android:layout_alignParentStart="true"
+                android:textAppearance="?attr/textAppearanceSmallPopupMenu"
+                android:singleLine="true"
+                android:duplicateParentState="true"
+                android:textAlignment="viewStart" />
+
+        </RelativeLayout>
+
+        <ImageView
+            android:id="@+id/submenuarrow"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:layout_marginStart="8dp"
+            android:scaleType="center"
+            android:visibility="gone" />
+
+        <!-- Checkbox, and/or radio button will be inserted here. -->
+
+    </LinearLayout>
+
+</com.android.internal.view.menu.ListMenuItemView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/power_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/power_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..60298d2e0f4bd392858bf144dd3a4e6d10369525
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/power_dialog.xml
@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+
+        <Button android:id="@+id/keyguard"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+         />
+
+        <Button android:id="@+id/off"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/power_off" />    
+            
+        <Button android:id="@+id/silent"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+            
+        <Button android:id="@+id/radio_power"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+        
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference.xml b/android-sdk/platforms/android-34/data/res/layout/preference.xml
new file mode 100644
index 0000000000000000000000000000000000000000..824ca93f927941681a4eaf1787d99763ff11d226
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference.xml
@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingEnd="?android:attr/scrollbarSize"
+    android:background="?android:attr/selectableItemBackground" >
+
+    <ImageView
+        android:id="@+android:id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center"
+        />
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="15dip"
+        android:layout_marginEnd="6dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="4" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center_vertical"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_category.xml b/android-sdk/platforms/android-34/data/res/layout/preference_category.xml
new file mode 100644
index 0000000000000000000000000000000000000000..280d952ac51243f32dab28e45f7e539d1d609551
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_category.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used for PreferenceCategory in a PreferenceActivity. -->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    style="?android:attr/listSeparatorTextViewStyle"
+    android:id="@+android:id/title"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_category_holo.xml b/android-sdk/platforms/android-34/data/res/layout/preference_category_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f2c63ae6cbb0c809a52437df2677f8a6c4541f89
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_category_holo.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used for PreferenceCategory in a PreferenceActivity. -->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    style="?android:attr/listSeparatorTextViewStyle"
+    android:id="@+android:id/title"
+    android:paddingStart="@dimen/preference_item_padding_side"
+    android:paddingEnd="@dimen/preference_item_padding_side" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_category_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_category_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..456b25280ee4dc582fa53fac4b519d7b9eb1ce03
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_category_material.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used for PreferenceCategory in a PreferenceActivity. -->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/title"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_marginBottom="16dip"
+    android:textAppearance="@style/TextAppearance.Material.Body2"
+    android:textColor="?android:attr/colorAccent"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:paddingTop="16dip" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_child.xml b/android-sdk/platforms/android-34/data/res/layout/preference_child.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6323c0e738b85db1c35a6eae20ecef3854982e75
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_child.xml
@@ -0,0 +1,75 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a visually child-like Preference in a PreferenceActivity. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="16dip"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_widget_width"
+        android:gravity="center"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginEnd="6dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+            
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="4" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_widget_width"
+        android:gravity="center"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_child_holo.xml b/android-sdk/platforms/android-34/data/res/layout/preference_child_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..17f97fd3908c592db13567f277c35890390d84f8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_child_holo.xml
@@ -0,0 +1,75 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a visually child-like Preference in a PreferenceActivity. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="@dimen/preference_child_padding_side"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_icon_minWidth"
+        android:gravity="center"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:paddingEnd="@dimen/preference_item_padding_inner" />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingEnd="@dimen/preference_item_padding_inner"
+        android:paddingTop="6dip"
+        android:paddingBottom="6dip">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+            
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_widget_width"
+        android:gravity="center"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_child_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_child_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e5a8819ea4cf9e2cb3cfdfa0380ebfb2ba61225b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_child_material.xml
@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a visually child-like Preference in a PreferenceActivity. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_marginStart="?attr/listPreferredItemPaddingStart"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd">
+
+    <LinearLayout
+        android:id="@+android:id/icon_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="58dip"
+        android:gravity="start|center_vertical"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginEnd="8dip" />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingTop="16dip"
+        android:paddingBottom="16dip">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceListItem" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="58dip"
+        android:gravity="end|center_vertical"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext.xml b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext.xml
new file mode 100644
index 0000000000000000000000000000000000000000..40b9e69a83d62098584f55bf6322fe46ecdf3a6c
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used as the dialog's content View for EditTextPreference. -->
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_marginTop="48dp"
+    android:layout_marginBottom="48dp"
+    android:overScrollMode="ifContentScrolls">
+
+    <LinearLayout
+        android:id="@+android:id/edittext_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:padding="5dip"
+        android:orientation="vertical">
+
+        <TextView android:id="@+android:id/message"
+            style="?android:attr/textAppearanceSmall"
+            android:layout_marginBottom="48dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:textColor="?android:attr/textColorSecondary" />
+
+    </LinearLayout>
+
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..df76f7fcd08754c58db052cfc22dbcf3ba08510e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_edittext_material.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used as the dialog's content View for EditTextPreference. -->
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_marginTop="48dp"
+    android:layout_marginBottom="48dp"
+    android:overScrollMode="ifContentScrolls">
+
+    <LinearLayout
+        android:id="@+id/edittext_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:padding="20dp"
+        android:orientation="vertical">
+
+        <TextView
+            android:id="@+id/message"
+            android:layout_marginBottom="48dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingStart="4dp"
+            android:paddingEnd="4dp"
+            android:textColor="?attr/textColorSecondary"
+            style="?attr/textAppearanceSmall" />
+
+    </LinearLayout>
+
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar.xml b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4e366c42eafdd8770b041a80a9dee7e86fa50315
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="match_parent"
+              android:gravity="center_horizontal"
+              android:orientation="vertical">
+
+    <ImageView
+        android:id="@+id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingTop="20dp" />
+
+    <SeekBar
+        android:id="@+id/seekbar"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:padding="20dp" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a98a9952752c9b2bd2bd3a24a23c60bf64f7c0eb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_dialog_seekbar_material.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="match_parent"
+              android:gravity="center_horizontal"
+              android:orientation="vertical">
+
+    <ImageView
+        android:id="@+id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingTop="?attr/dialogPreferredPadding" />
+
+    <SeekBar
+        android:id="@+id/seekbar"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="?attr/dialogPreferredPadding"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_header_item.xml b/android-sdk/platforms/android-34/data/res/layout/preference_header_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0d582a04ff5ef418162753c834a41167646d39ec
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_header_item.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout of a header item in PreferenceActivity. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="48dp"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:gravity="center_vertical"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <ImageView
+        android:id="@+id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="6dip"
+        android:layout_marginEnd="6dip"
+        android:layout_gravity="center" />
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="2dip"
+        android:layout_marginEnd="6dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:ellipsize="end"
+            android:maxLines="2" />
+
+    </RelativeLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_header_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_header_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ffb18ae4a8747ec898f1fd202905662a6a59d12f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_header_item_material.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout of a header item in PreferenceActivity. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="48dp"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:gravity="center_vertical"
+    android:paddingStart="24dip"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <ImageView
+        android:id="@+id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="0dip"
+        android:layout_marginEnd="8dip"
+        android:layout_gravity="center" />
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="0dip"
+        android:layout_marginEnd="6dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceListItem"
+            android:textColor="?android:attr/textColorPrimaryActivated"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+            android:textColor="?android:attr/textColorSecondaryActivated"
+            android:ellipsize="end"
+            android:maxLines="2" />
+
+    </RelativeLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_holo.xml b/android-sdk/platforms/android-34/data/res/layout/preference_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1b3ab867511378af134cc0e1a7cb3da3c193f475
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_holo.xml
@@ -0,0 +1,81 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="@dimen/preference_item_padding_side"
+    android:paddingEnd="?android:attr/scrollbarSize"
+    android:background="?android:attr/activatedBackgroundIndicator">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:minWidth="@dimen/preference_icon_minWidth"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="48dp"
+            android:layout_height="48dp"
+            android:layout_gravity="center"
+            android:minWidth="48dp"
+            android:scaleType="centerInside"
+            android:layout_marginEnd="@dimen/preference_item_padding_inner"
+             />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingEnd="@dimen/preference_item_padding_inner"
+        android:paddingTop="6dip"
+        android:paddingBottom="6dip">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_widget_width"
+        android:gravity="center"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_information.xml b/android-sdk/platforms/android-34/data/res/layout/preference_information.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e3be382061a33fba780d1118ba0463f44217dd55
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_information.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="16sp"
+        android:layout_marginEnd="6sp"
+        android:layout_marginTop="6sp"
+        android:layout_marginBottom="6sp"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textColor="?android:attr/textColorSecondary" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="2" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center_vertical"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_information_holo.xml b/android-sdk/platforms/android-34/data/res/layout/preference_information_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d0d446cb8fc760b287de107e46a28c0d6effc443
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_information_holo.xml
@@ -0,0 +1,75 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="@dimen/preference_item_padding_side"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="@dimen/preference_icon_minWidth"
+        android:gravity="center"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:paddingEnd="@dimen/preference_item_padding_inner" />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingEnd="@dimen/preference_item_padding_inner"
+        android:paddingTop="6dip"
+        android:paddingBottom="6dip">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:textColor="?android:attr/textColorSecondary" />
+            
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center_vertical"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_information_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_information_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d283f62765961d34007462193f87a47bfb5486d9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_information_material.xml
@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd">
+
+    <LinearLayout
+        android:id="@+android:id/icon_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="58dip"
+        android:gravity="start|center_vertical"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginEnd="8dip" />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingTop="16dip"
+        android:paddingBottom="16dip">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceListItem" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:minWidth="58dip"
+        android:gravity="end|center_vertical"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_list_content.xml b/android-sdk/platforms/android-34/data/res/layout/preference_list_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bed80edf0ee76725f6573ffe4bbcdfde5d681636
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_list_content.xml
@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent">
+
+    <LinearLayout
+        android:id="@+id/prefs_container"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+
+        <LinearLayout
+            style="?attr/preferenceHeaderPanelStyle"
+            android:id="@+id/headers"
+            android:orientation="vertical"
+            android:layout_width="0px"
+            android:layout_height="match_parent"
+            android:layout_weight="@integer/preferences_left_pane_weight">
+
+            <ListView android:id="@android:id/list"
+                style="?attr/preferenceListStyle"
+                android:layout_width="match_parent"
+                android:layout_height="0px"
+                android:layout_weight="1"
+                android:clipToPadding="false"
+                android:drawSelectorOnTop="false"
+                android:cacheColorHint="@android:color/transparent"
+                android:listPreferredItemHeight="48dp"
+                android:scrollbarAlwaysDrawVerticalTrack="true" />
+
+            <FrameLayout android:id="@+id/list_footer"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="0" />
+
+        </LinearLayout>
+
+        <LinearLayout
+                android:id="@+id/prefs_frame"
+                style="?attr/preferencePanelStyle"
+                android:layout_width="0px"
+                android:layout_height="match_parent"
+                android:layout_weight="@integer/preferences_right_pane_weight"
+                android:orientation="vertical">
+
+            <!-- Breadcrumb inserted here, in certain screen sizes. In others, it will be an
+                empty layout or just padding, and PreferenceActivity will put the breadcrumbs in
+                the action bar. -->
+            <include layout="@layout/breadcrumbs_in_fragment" />
+
+            <android.preference.PreferenceFrameLayout android:id="@+id/prefs"
+                    android:layout_width="match_parent"
+                    android:layout_height="0dip"
+                    android:layout_weight="1"
+                />
+        </LinearLayout>
+    </LinearLayout>
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_list_content_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_list_content_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..37b411918ef669dc2b0df3a732255b5b5c3a0719
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_list_content_material.xml
@@ -0,0 +1,118 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/list_content.xml
+**
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent">
+
+    <LinearLayout
+        android:id="@+id/prefs_container"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+
+        <LinearLayout
+            style="?attr/preferenceHeaderPanelStyle"
+            android:id="@+id/headers"
+            android:orientation="vertical"
+            android:layout_width="0px"
+            android:layout_height="match_parent"
+            android:layout_weight="@integer/preferences_left_pane_weight"
+            android:background="?attr/windowBackground"
+            android:elevation="4dip" >
+
+            <ListView android:id="@android:id/list"
+                style="?attr/preferenceListStyle"
+                android:layout_width="match_parent"
+                android:layout_height="0px"
+                android:layout_weight="1"
+                android:clipToPadding="false"
+                android:drawSelectorOnTop="false"
+                android:cacheColorHint="@color/transparent"
+                android:listPreferredItemHeight="48dp"
+                android:scrollbarAlwaysDrawVerticalTrack="true"
+                android:divider="@null" />
+
+            <FrameLayout android:id="@+id/list_footer"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="0" />
+
+        </LinearLayout>
+
+        <LinearLayout
+                android:id="@+id/prefs_frame"
+                style="?attr/preferencePanelStyle"
+                android:layout_width="0px"
+                android:layout_height="match_parent"
+                android:layout_weight="@integer/preferences_right_pane_weight"
+                android:orientation="vertical">
+
+            <!-- Breadcrumb inserted here, in certain screen sizes. In others, it will be an
+                empty layout or just padding, and PreferenceActivity will put the breadcrumbs in
+                the action bar. -->
+            <include layout="@layout/breadcrumbs_in_fragment_material" />
+
+            <android.preference.PreferenceFrameLayout android:id="@+id/prefs"
+                    android:layout_width="match_parent"
+                    android:layout_height="0dip"
+                    android:layout_weight="1"
+                />
+        </LinearLayout>
+    </LinearLayout>
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_list_content_single.xml b/android-sdk/platforms/android-34/data/res/layout/preference_list_content_single.xml
new file mode 100644
index 0000000000000000000000000000000000000000..726ce78b281f4c18e778f4e6f11774d6e09231da
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_list_content_single.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent">
+
+    <LinearLayout
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+
+        <LinearLayout
+            android:id="@+id/headers"
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent">
+
+            <ListView android:id="@android:id/list"
+                style="?attr/preferenceFragmentStyle"
+                android:layout_width="match_parent"
+                android:layout_height="0px"
+                android:layout_weight="1"
+                android:drawSelectorOnTop="false"
+                android:scrollbarStyle="@integer/preference_fragment_scrollbarStyle"
+                android:cacheColorHint="@android:color/transparent"
+                android:listPreferredItemHeight="48dp"
+                android:scrollbarAlwaysDrawVerticalTrack="true" />
+
+            <FrameLayout android:id="@+id/list_footer"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="0" />
+
+        </LinearLayout>
+
+    </LinearLayout>
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment.xml b/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c43975e4ad3c712c8583275148d6adedc59ab83e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent"
+    android:background="@android:color/transparent"
+    android:layout_removeBorders="true">
+
+    <FrameLayout
+        android:id="@android:id/list_container"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+        <ListView android:id="@android:id/list"
+            style="?attr/preferenceFragmentListStyle"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:scrollbarStyle="@integer/preference_fragment_scrollbarStyle"
+            android:clipToPadding="false"
+            android:drawSelectorOnTop="false"
+            android:cacheColorHint="@android:color/transparent"
+            android:scrollbarAlwaysDrawVerticalTrack="true" />
+    </FrameLayout>
+
+    <TextView android:id="@android:id/empty"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:padding="@dimen/preference_fragment_padding_side"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:gravity="center"
+        android:visibility="gone" />
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..db2fe7d038e069c711549947e97b43bdb34e4d76
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_list_fragment_material.xml
@@ -0,0 +1,85 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent"
+    android:background="@android:color/transparent"
+    android:layout_removeBorders="true">
+
+    <FrameLayout
+        android:id="@android:id/list_container"
+        android:layout_width="match_parent"
+        android:layout_height="0px"
+        android:layout_weight="1">
+        <ListView android:id="@android:id/list"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            style="?attr/preferenceFragmentListStyle"
+            android:scrollbarStyle="@integer/preference_fragment_scrollbarStyle"
+            android:clipToPadding="false"
+            android:drawSelectorOnTop="false"
+            android:cacheColorHint="@android:color/transparent"
+            android:scrollbarAlwaysDrawVerticalTrack="true" />
+    </FrameLayout>
+
+    <TextView android:id="@android:id/empty"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:padding="@dimen/preference_fragment_padding_side"
+        android:gravity="center"
+        android:visibility="gone" />
+
+    <RelativeLayout android:id="@+id/button_bar"
+        android:layout_height="wrap_content"
+        android:layout_width="match_parent"
+        android:layout_weight="0"
+        android:visibility="gone">
+
+        <Button android:id="@+id/back_button"
+            android:layout_width="150dip"
+            android:layout_height="wrap_content"
+            android:layout_margin="5dip"
+            android:layout_alignParentStart="true"
+            android:text="@string/back_button_label"
+        />
+        <LinearLayout
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true">
+
+            <Button android:id="@+id/skip_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/skip_button_label"
+                android:visibility="gone"
+            />
+
+            <Button android:id="@+id/next_button"
+                android:layout_width="150dip"
+                android:layout_height="wrap_content"
+                android:layout_margin="5dip"
+                android:text="@string/next_button_label"
+            />
+        </LinearLayout>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..871b99ca6679b4557c8a6df78bcde05cb51cba38
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_material.xml
@@ -0,0 +1,83 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout for a Preference in a PreferenceActivity. The
+     Preference is able to place a specific widget for its particular
+     type in the "widget_frame" layout. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:background="?attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+
+    <LinearLayout
+        android:id="@+id/icon_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="-4dp"
+        android:minWidth="60dp"
+        android:gravity="start|center_vertical"
+        android:orientation="horizontal"
+        android:paddingEnd="12dp"
+        android:paddingTop="4dp"
+        android:paddingBottom="4dp">
+        <com.android.internal.widget.PreferenceImageView
+            android:id="@+id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:maxWidth="48dp"
+            android:maxHeight="48dp" />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:paddingTop="16dp"
+        android:paddingBottom="16dp">
+
+        <TextView android:id="@+id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?attr/textAppearanceListItem"
+            android:ellipsize="marquee" />
+
+        <TextView android:id="@+id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/title"
+            android:layout_alignStart="@id/title"
+            android:textAppearance="?attr/textAppearanceListItemSecondary"
+            android:textColor="?attr/textColorSecondary"
+            android:maxLines="10"
+            android:ellipsize="end" />
+
+    </RelativeLayout>
+
+    <!-- Preference should place its actual preference widget here. -->
+    <LinearLayout android:id="@+id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="end|center_vertical"
+        android:paddingStart="16dp"
+        android:orientation="vertical" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_widget_checkbox.xml b/android-sdk/platforms/android-34/data/res/layout/preference_widget_checkbox.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f7943465821a6ebfd432b301f35a48f27857a722
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_widget_checkbox.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used by CheckBoxPreference for the checkbox style. This is inflated
+     inside android.R.layout.preference. -->
+<CheckBox xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/checkbox" 
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:focusable="false"
+    android:clickable="false"
+    android:background="@null" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar.xml b/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0c6dbf1f2400566e2f2ccc569714257002a8a7ce
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar.xml
@@ -0,0 +1,85 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used by SeekBarPreference for the seekbar widget style. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingEnd="?android:attr/scrollbarSize">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:minWidth="@dimen/preference_icon_minWidth"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:minWidth="48dp"
+            />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="16dip"
+        android:layout_marginEnd="8dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="4" />
+
+        <!-- Preference should place its actual preference widget here. -->
+        <LinearLayout android:id="@+android:id/widget_frame"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_below="@android:id/summary"
+            android:layout_alignStart="@android:id/title"
+            android:minWidth="@dimen/preference_widget_width"
+            android:gravity="center"
+            android:orientation="vertical" />
+
+        <SeekBar android:id="@+android:id/seekbar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/summary"
+            android:layout_toEndOf="@android:id/widget_frame"
+            android:layout_alignParentEnd="true" />
+
+    </RelativeLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar_material.xml b/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6c72c9ed007d792c9eab2cfeda196726bc7b15f4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_widget_seekbar_material.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used by SeekBarPreference for the seekbar widget style. -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center"
+        android:minWidth="@dimen/preference_icon_minWidth"
+        android:orientation="horizontal">
+        <ImageView
+            android:id="@+android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center"
+            android:minWidth="48dp"
+            />
+    </LinearLayout>
+
+    <RelativeLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="16dip"
+        android:layout_marginEnd="8dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+
+        <TextView android:id="@+android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:textAppearance="?android:attr/textAppearanceListItem"
+            android:ellipsize="marquee"
+            android:fadingEdge="horizontal" />
+
+        <TextView android:id="@+android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/title"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="4" />
+
+        <!-- Preference should place its actual preference widget here. -->
+        <LinearLayout android:id="@+android:id/widget_frame"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_below="@android:id/summary"
+            android:layout_alignStart="@android:id/title"
+            android:minWidth="@dimen/preference_widget_width"
+            android:gravity="center"
+            android:orientation="vertical" />
+
+        <SeekBar android:id="@+android:id/seekbar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/summary"
+            android:layout_toEndOf="@android:id/widget_frame"
+            android:layout_alignParentEnd="true" />
+
+    </RelativeLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/preference_widget_switch.xml b/android-sdk/platforms/android-34/data/res/layout/preference_widget_switch.xml
new file mode 100644
index 0000000000000000000000000000000000000000..80c572bb7c013a6c63943df318be5885168abc11
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preference_widget_switch.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used by SwitchPreference for the switch widget style. This is inflated
+     inside android.R.layout.preference. -->
+<Switch xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/switch_widget"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:focusable="false"
+    android:clickable="false"
+    android:background="@null" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/preferences.xml b/android-sdk/platforms/android-34/data/res/layout/preferences.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c631f6c0651945bfe7ca195db114980f9bd45b30
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/preferences.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used by PreferenceScreen. This is inflated inside 
+        android.R.layout.preference. -->
+<ImageView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:layout_marginEnd="4dip"
+    android:layout_gravity="center_vertical"
+    android:background="@drawable/btn_circle"
+    android:src="@drawable/ic_btn_round_more" />
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/progress_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/progress_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0d3cd4a9b43c55e1e91b45cbaab1959fcceb37e3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/progress_dialog.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/alert_dialog.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <LinearLayout android:id="@+id/body"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:baselineAligned="false"
+        android:paddingStart="8dip"
+        android:paddingTop="10dip"
+        android:paddingEnd="8dip"
+        android:paddingBottom="10dip">
+
+        <ProgressBar android:id="@android:id/progress"
+            style="?android:attr/progressBarStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:max="10000"
+            android:layout_marginEnd="12dip" />
+
+        <TextView android:id="@+id/message"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/progress_dialog_holo.xml b/android-sdk/platforms/android-34/data/res/layout/progress_dialog_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6aad9eaee8c113af02c749febe90328a915dd638
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/progress_dialog_holo.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <LinearLayout android:id="@+id/body"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:baselineAligned="false"
+        android:padding="16dip">
+
+        <ProgressBar android:id="@android:id/progress"
+            style="?android:attr/progressBarStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:max="10000"
+            android:layout_marginEnd="16dip" />
+
+        <TextView android:id="@+id/message"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/progress_dialog_material.xml b/android-sdk/platforms/android-34/data/res/layout/progress_dialog_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..241796599ee8f6978b60380c1557462e64aca513
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/progress_dialog_material.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+
+    <LinearLayout
+        android:id="@+id/body"
+        android:orientation="horizontal"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:baselineAligned="false"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingTop="@dimen/dialog_padding_top_material"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:paddingBottom="@dimen/dialog_padding_top_material">
+
+        <ProgressBar
+            android:id="@id/progress"
+            style="?android:attr/progressBarStyle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:max="10000"
+            android:layout_marginEnd="?attr/dialogPreferredPadding" />
+
+        <TextView
+            android:id="@+id/message"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical" />
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/recent_apps_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/recent_apps_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e3492f6ca23a0d0eab5780361d7efc9b0cebc53b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/recent_apps_dialog.xml
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<com.android.internal.policy.impl.RecentApplicationsBackground
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:background="@drawable/recent_dialog_background"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:gravity="center"
+    android:padding="4dip"
+    android:orientation="vertical">
+
+    <!-- Title -->
+    <TextView
+        android:layout_width="wrap_content"
+        android:layout_height="40dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:textColor="#80FFFFFF"
+        android:textStyle="bold"
+        android:singleLine="true"
+        android:text="@android:string/recent_tasks_title" />
+
+    <!-- This is only intended to be visible when all buttons (below) are invisible -->
+    <TextView
+        android:id="@+id/no_applications_message"
+        android:layout_width="320dip"
+        android:layout_height="80dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:text="@android:string/no_recent_tasks" />
+
+    <!-- The first row has a fixed-width because the UI spec requires the box
+         to display with full-width no matter how many icons are visible, but to
+         adjust height based on number of rows. -->
+    <!-- TODO Adjust all sizes, padding, etc. to meet pixel-perfect specs -->
+    <LinearLayout
+        android:layout_width="320dip"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        >
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button0" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button1" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button2" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button3" />
+
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="320dp"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal" >
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button4" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button5" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button6" />
+
+        <include
+            layout="@android:layout/recent_apps_icon"
+            android:id="@+id/button7" />
+
+    </LinearLayout>
+
+    <!-- spacer to balance out the title above -->
+    <FrameLayout
+        android:layout_height="40dip"
+        android:layout_width="match_parent"
+        />
+</com.android.internal.policy.impl.RecentApplicationsBackground>
diff --git a/android-sdk/platforms/android-34/data/res/layout/recent_apps_icon.xml b/android-sdk/platforms/android-34/data/res/layout/recent_apps_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f73aec35580e67778511e66380409ad1dd7f9c5f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/recent_apps_icon.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- This is not a standalone element - it is imported into recent_apps_dialog.xml -->
+<TextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/label"
+    style="?android:attr/buttonStyle"
+    android:background="#00000000"
+    android:layout_width="80dip"
+    android:layout_height="wrap_content"
+    android:layout_marginTop="3dip"
+    android:layout_marginBottom="3dip"
+    android:textColor="@color/bright_foreground_dark"
+
+    android:paddingTop="5dip"
+    android:paddingBottom="2dip"
+    android:drawablePadding="0dip"
+
+    android:textSize="13dip"
+    android:maxLines="2"
+    android:ellipsize="marquee"
+    android:fadingEdge="horizontal"
+    android:gravity="top|center_horizontal" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/remote_views_adapter_default_loading_view.xml b/android-sdk/platforms/android-34/data/res/layout/remote_views_adapter_default_loading_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..864e435dfda6016a1c81208a744acdde038302c2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/remote_views_adapter_default_loading_view.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+
+    android:id="@+id/default_loading_view"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:gravity="center_horizontal|center_vertical"
+
+    android:text="@string/loading"
+    android:textColor="#60FFFFFF"
+    android:textSize="18sp"
+    android:shadowColor="#FF000000"
+    android:shadowDx="0.0"
+    android:shadowDy="1.0"
+    android:shadowRadius="1.0" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolve_grid_item.xml b/android-sdk/platforms/android-34/data/res/layout/resolve_grid_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a5ff4706c085900ee637a1119abd5d490443de1d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolve_grid_item.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:id="@+id/item"
+              android:orientation="vertical"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:minHeight="100dp"
+              android:gravity="center"
+              android:paddingTop="24dp"
+              android:paddingBottom="12dp"
+              android:paddingLeft="12dp"
+              android:paddingRight="12dp"
+              android:focusable="true"
+              android:background="?attr/selectableItemBackgroundBorderless">
+
+    <ImageView android:id="@+id/icon"
+               android:layout_width="@dimen/chooser_icon_size"
+               android:layout_height="@dimen/chooser_icon_size"
+               android:scaleType="fitCenter" />
+
+    <!-- Size manually tuned to match specs -->
+    <Space android:layout_width="1dp"
+           android:layout_height="7dp"/>
+
+    <!-- App name or Direct Share target name, DS set to 2 lines -->
+    <TextView android:id="@android:id/text1"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:textAppearance="?attr/textAppearanceSmall"
+              android:textColor="?attr/textColorPrimary"
+              android:textSize="12sp"
+              android:gravity="top|center_horizontal"
+              android:lines="1"
+              android:ellipsize="end" />
+
+    <!-- Activity name if set, gone for Direct Share targets -->
+    <TextView android:id="@android:id/text2"
+              android:textAppearance="?android:attr/textAppearanceSmall"
+              android:textSize="12sp"
+              android:textColor="?attr/textColorSecondary"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:lines="1"
+              android:gravity="top|center_horizontal"
+              android:ellipsize="end"/>
+
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolve_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/resolve_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..86f028c174fe2024bd80419d3fd55a38402eba03
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolve_list_item.xml
@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/any/layout/resolve_list_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:orientation="horizontal"
+              android:layout_height="wrap_content"
+              android:layout_width="match_parent"
+              android:minHeight="?attr/listPreferredItemHeightSmall"
+              android:background="?attr/activatedBackgroundIndicator">
+
+    <!-- Activity icon when presenting dialog
+         Size will be filled in by ResolverActivity -->
+    <ImageView android:id="@+id/icon"
+               android:layout_width="@dimen/resolver_icon_size"
+               android:layout_height="@dimen/resolver_icon_size"
+               android:layout_gravity="start|center_vertical"
+               android:layout_marginStart="@dimen/resolver_icon_margin"
+               android:layout_marginEnd="@dimen/resolver_icon_margin"
+               android:layout_marginTop="12dp"
+               android:layout_marginBottom="12dp"
+               android:scaleType="fitCenter" />
+
+    <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:gravity="start|center_vertical"
+              android:orientation="vertical"
+              android:paddingEnd="@dimen/resolver_edge_margin"
+              android:layout_height="wrap_content"
+              android:layout_width="wrap_content"
+              android:layout_gravity="start|center_vertical">
+        <!-- Activity name -->
+        <TextView android:id="@android:id/text1"
+                  android:layout_width="wrap_content"
+                  android:layout_height="wrap_content"
+                  android:layout_gravity="start|center_vertical"
+                  android:textColor="?android:attr/textColorPrimary"
+                  android:fontFamily="@android:string/config_bodyFontFamily"
+                  android:textSize="16sp"
+                  android:minLines="1"
+                  android:maxLines="1"
+                  android:ellipsize="marquee" />
+        <!-- Extended activity info to distinguish between duplicate activity names
+            or provide record w/o permission warnings.
+        -->
+        <TextView android:id="@android:id/text2"
+                  android:textColor="?android:attr/textColorSecondary"
+                  android:fontFamily="@android:string/config_bodyFontFamily"
+                  android:layout_gravity="start|center_vertical"
+                  android:textSize="14sp"
+                  android:visibility="gone"
+                  android:layout_width="wrap_content"
+                  android:layout_height="wrap_content"
+                  android:minLines="1"
+                  android:maxLines="2"
+                  android:ellipsize="marquee" />
+    </LinearLayout>
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_different_item_header.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_different_item_header.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0a35edc423298944ed05498947ce71456fab49f2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_different_item_header.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+ * Copyright 2014, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+<TextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_alwaysShow="true"
+    android:text="@string/use_a_different_app"
+    android:textColor="?android:attr/textColorPrimary"
+    android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+    android:textSize="16sp"
+    android:gravity="start|center_vertical"
+    android:paddingStart="@dimen/resolver_edge_margin"
+    android:paddingEnd="@dimen/resolver_edge_margin"
+    android:paddingTop="@dimen/resolver_small_margin"
+    android:paddingBottom="@dimen/resolver_edge_margin"
+    android:elevation="1dp" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_empty_states.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_empty_states.xml
new file mode 100644
index 0000000000000000000000000000000000000000..cda353f3d2f0d03ad692835ffc5bce11dc695385
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_empty_states.xml
@@ -0,0 +1,90 @@
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/resolver_empty_state"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="center_horizontal"
+    android:visibility="gone"
+    android:paddingStart="24dp"
+    android:paddingEnd="24dp">
+    <RelativeLayout
+        android:id="@+id/resolver_empty_state_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingTop="@dimen/resolver_empty_state_container_padding_top"
+        android:paddingBottom="@dimen/resolver_empty_state_container_padding_bottom"
+        android:gravity="center_horizontal">
+        <TextView
+            android:id="@+id/resolver_empty_state_title"
+            android:layout_below="@+id/resolver_empty_state_icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:fontFamily="@string/config_headlineFontFamilyMedium"
+            android:textColor="?android:attr/textColorPrimary"
+            android:textSize="18sp"
+            android:lineHeight="24sp"
+            android:gravity="center_horizontal"
+            android:layout_centerHorizontal="true" />
+        <TextView
+            android:id="@+id/resolver_empty_state_subtitle"
+            android:layout_below="@+id/resolver_empty_state_title"
+            android:layout_marginTop="16dp"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textColor="?android:attr/textColorSecondary"
+            android:textSize="14sp"
+            android:lineHeight="20sp"
+            android:gravity="center_horizontal"
+            android:layout_centerHorizontal="true" />
+        <Button
+            android:id="@+id/resolver_empty_state_button"
+            android:layout_below="@+id/resolver_empty_state_subtitle"
+            android:layout_marginTop="16dp"
+            android:text="@string/resolver_switch_on_work"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:padding="12dp"
+            android:fontFamily="@string/config_headlineFontFamilyMedium"
+            android:textSize="14sp"
+            android:textColor="?android:attr/textColorPrimary"
+            android:layout_centerHorizontal="true"
+            android:background="@drawable/chooser_action_button_bg"
+            />
+        <ProgressBar
+            android:id="@+id/resolver_empty_state_progress"
+            style="@style/Widget.Material.Light.ProgressBar"
+            android:visibility="gone"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:indeterminate="true"
+            android:layout_alignTop="@+id/resolver_empty_state_icon"
+            android:layout_alignBottom="@+id/resolver_empty_state_button"
+            android:layout_centerHorizontal="true"
+            android:layout_below="@+id/resolver_empty_state_subtitle"
+            android:indeterminateTint="?attr/colorAccent"/>
+    </RelativeLayout>
+    <TextView android:id="@+id/empty"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?attr/colorBackground"
+        android:text="@string/noApplications"
+        android:padding="@dimen/chooser_edge_margin_normal"
+        android:layout_marginBottom="56dp"
+        android:gravity="center"/>
+</RelativeLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_list.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_list.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a06e8a4ea4a001985b593fa18826f1bcd2026c41
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_list.xml
@@ -0,0 +1,172 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2012, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:maxWidth="@dimen/resolver_max_width"
+    android:maxCollapsedHeight="@dimen/resolver_max_collapsed_height"
+    android:maxCollapsedHeightSmall="56dp"
+    android:ignoreOffsetTopLimit="@id/title_container"
+    android:id="@id/contentPanel">
+
+    <RelativeLayout
+        android:id="@+id/title_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:elevation="@dimen/resolver_elevation"
+        android:paddingTop="@dimen/resolver_small_margin"
+        android:paddingStart="@dimen/resolver_edge_margin"
+        android:paddingEnd="@dimen/resolver_edge_margin"
+        android:paddingBottom="@dimen/resolver_title_padding_bottom"
+        android:background="@drawable/bottomsheet_background">
+
+        <TextView
+            android:id="@+id/profile_button"
+            android:layout_width="wrap_content"
+            android:layout_height="48dp"
+            android:layout_marginEnd="8dp"
+            android:visibility="gone"
+            style="?attr/borderlessButtonStyle"
+            android:textAppearance="?attr/textAppearanceButton"
+            android:textColor="?attr/colorAccent"
+            android:gravity="center_vertical"
+            android:layout_alignParentTop="true"
+            android:layout_alignParentEnd="true"
+            android:singleLine="true" />
+
+        <TextView
+            android:id="@+id/title"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/profile_button"
+            android:layout_alignParentStart="true"
+            android:textColor="?android:attr/textColorPrimary"
+            android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+            android:textSize="16sp"
+            android:gravity="start|center_vertical" />
+    </RelativeLayout>
+
+    <View
+        android:id="@+id/divider"
+        android:layout_alwaysShow="true"
+        android:layout_width="match_parent"
+        android:layout_height="1dp"
+        android:background="?attr/colorBackground"
+        android:foreground="?attr/dividerVertical" />
+
+    <FrameLayout
+        android:id="@+id/stub"
+        android:visibility="gone"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?attr/colorBackground"/>
+
+    <TabHost
+        android:id="@+id/profile_tabhost"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentTop="true"
+        android:layout_centerHorizontal="true"
+        android:accessibilityTraversalAfter="@id/title"
+        android:background="?attr/colorBackground">
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content">
+            <!-- horizontal padding = 8dp content padding - 4dp margin that tab buttons have. -->
+            <TabWidget
+                android:id="@android:id/tabs"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:tabStripEnabled="false"
+                android:paddingHorizontal="4dp"
+                android:visibility="gone" />
+            <FrameLayout
+                android:id="@android:id/tabcontent"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+                <com.android.internal.app.ResolverViewPager
+                    android:id="@+id/profile_pager"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content" />
+            </FrameLayout>
+        </LinearLayout>
+    </TabHost>
+    <LinearLayout
+        android:id="@+id/button_bar_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:orientation="vertical"
+        android:background="?attr/colorBackground"
+        android:layout_ignoreOffset="true">
+        <View
+            android:id="@+id/resolver_button_bar_divider"
+            android:layout_width="match_parent"
+            android:layout_height="1dp"
+            android:background="?attr/colorBackground"
+            android:foreground="?attr/dividerVertical" />
+        <LinearLayout
+            android:id="@+id/button_bar"
+            android:visibility="gone"
+            style="?attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_ignoreOffset="true"
+            android:layout_hasNestedScrollIndicator="true"
+            android:gravity="end|center_vertical"
+            android:orientation="horizontal"
+            android:layoutDirection="locale"
+            android:measureWithLargestChild="true"
+            android:paddingTop="@dimen/resolver_button_bar_spacing"
+            android:paddingBottom="@dimen/resolver_button_bar_spacing"
+            android:paddingStart="@dimen/resolver_edge_margin"
+            android:paddingEnd="@dimen/resolver_small_margin"
+            android:elevation="@dimen/resolver_elevation">
+
+            <Button
+                android:id="@+id/button_once"
+                android:layout_width="wrap_content"
+                android:layout_gravity="start"
+                android:maxLines="2"
+                style="?attr/buttonBarButtonStyle"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:layout_height="wrap_content"
+                android:textAllCaps="false"
+                android:enabled="false"
+                android:text="@string/activity_resolver_use_once"
+                android:onClick="onButtonClick" />
+
+            <Button
+                android:id="@+id/button_always"
+                android:layout_width="wrap_content"
+                android:layout_gravity="end"
+                android:maxLines="2"
+                style="?attr/buttonBarButtonStyle"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:textAllCaps="false"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:text="@string/activity_resolver_use_always"
+                android:onClick="onButtonClick" />
+        </LinearLayout>
+    </LinearLayout>
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_list_per_profile.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_list_per_profile.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d6ca7abdca71d73f3e8d63fed673970dfb6ddf85
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_list_per_profile.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2019 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+<RelativeLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+    <ListView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:id="@+id/resolver_list"
+        android:clipToPadding="false"
+        android:background="?attr/colorBackground"
+        android:elevation="@dimen/resolver_elevation"
+        android:nestedScrollingEnabled="true"
+        android:scrollbarStyle="outsideOverlay"
+        android:divider="@null"
+        android:footerDividersEnabled="false"
+        android:headerDividersEnabled="false"
+        android:dividerHeight="0dp" />
+
+    <include layout="@layout/resolver_empty_states" />
+</RelativeLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_list_with_default.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_list_with_default.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7610e732ed06c10199ad9c6e182dfc5b9b3e7414
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_list_with_default.xml
@@ -0,0 +1,205 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+* Copyright 2014, The Android Open Source Project
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+-->
+<com.android.internal.widget.ResolverDrawerLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:maxWidth="@dimen/resolver_max_width"
+    android:maxCollapsedHeight="@dimen/resolver_max_collapsed_height_with_default"
+    android:id="@id/contentPanel">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alwaysShow="true"
+        android:orientation="vertical"
+        android:background="@drawable/bottomsheet_background"
+        android:paddingTop="@dimen/resolver_small_margin"
+        android:elevation="@dimen/resolver_elevation">
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="horizontal"
+            android:paddingBottom="@dimen/resolver_edge_margin"
+            android:paddingEnd="@dimen/resolver_edge_margin">
+            <ImageView
+                android:id="@+id/icon"
+                android:layout_width="@dimen/resolver_icon_size"
+                android:layout_height="@dimen/resolver_icon_size"
+                android:layout_gravity="start|top"
+                android:layout_marginStart="@dimen/resolver_icon_margin"
+                android:src="@drawable/resolver_icon_placeholder"
+                android:scaleType="fitCenter" />
+
+            <TextView
+                android:id="@+id/title"
+                android:layout_width="0dp"
+                android:layout_weight="1"
+                android:layout_height="wrap_content"
+                android:layout_marginStart="@dimen/resolver_icon_margin"
+                android:textColor="?android:attr/textColorPrimary"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:textSize="16sp"
+                android:gravity="start|center_vertical"
+                android:paddingEnd="16dp" />
+
+            <LinearLayout
+                android:id="@+id/profile_button"
+                android:layout_width="wrap_content"
+                android:layout_height="48dp"
+                android:layout_marginTop="4dp"
+                android:layout_marginEnd="4dp"
+                android:paddingStart="8dp"
+                android:paddingEnd="8dp"
+                android:paddingTop="4dp"
+                android:paddingBottom="4dp"
+                android:focusable="true"
+                android:visibility="gone"
+                style="?attr/borderlessButtonStyle">
+
+                <ImageView
+                    android:id="@+id/icon"
+                    android:layout_width="24dp"
+                    android:layout_height="24dp"
+                    android:layout_gravity="start|center_vertical"
+                    android:layout_marginEnd="?attr/listPreferredItemPaddingEnd"
+                    android:layout_marginTop="12dp"
+                    android:layout_marginBottom="12dp"
+                    android:scaleType="fitCenter" />
+
+                <TextView
+                    android:id="@id/text1"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:layout_gravity="start|center_vertical"
+                    android:layout_marginEnd="?attr/listPreferredItemPaddingEnd"
+                    android:textAppearance="?attr/textAppearanceButton"
+                    android:textColor="?attr/textColorPrimary"
+                    android:minLines="1"
+                    android:maxLines="1"
+                    android:ellipsize="marquee" />
+            </LinearLayout>
+        </LinearLayout>
+
+        <LinearLayout
+            android:id="@+id/button_bar"
+            android:visibility="gone"
+            style="?attr/buttonBarStyle"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_alwaysShow="true"
+            android:gravity="end|center_vertical"
+            android:orientation="horizontal"
+            android:layoutDirection="locale"
+            android:measureWithLargestChild="true"
+            android:paddingTop="@dimen/resolver_button_bar_spacing"
+            android:paddingBottom="@dimen/resolver_button_bar_spacing"
+            android:paddingStart="@dimen/resolver_edge_margin"
+            android:paddingEnd="@dimen/resolver_small_margin"
+            android:elevation="@dimen/resolver_elevation">
+
+            <Button
+                android:id="@+id/button_once"
+                android:layout_width="wrap_content"
+                android:layout_gravity="start"
+                android:maxLines="2"
+                style="?attr/buttonBarButtonStyle"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:textAllCaps="false"
+                android:text="@string/activity_resolver_use_once"
+                android:onClick="onButtonClick" />
+
+            <Button
+                android:id="@+id/button_always"
+                android:layout_width="wrap_content"
+                android:layout_gravity="end"
+                android:maxLines="2"
+                style="?attr/buttonBarButtonStyle"
+                android:fontFamily="@android:string/config_headlineFontFamilyMedium"
+                android:layout_height="wrap_content"
+                android:enabled="false"
+                android:textAllCaps="false"
+                android:text="@string/activity_resolver_use_always"
+                android:onClick="onButtonClick" />
+        </LinearLayout>
+    </LinearLayout>
+
+    <View
+        android:id="@+id/divider"
+        android:layout_alwaysShow="true"
+        android:layout_width="match_parent"
+        android:layout_height="1dp"
+        android:background="?attr/colorBackground"
+        android:foreground="?attr/dividerVertical" />
+
+    <FrameLayout
+        android:id="@+id/stub"
+        android:layout_alwaysShow="true"
+        android:visibility="gone"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?attr/colorBackground"/>
+
+    <TabHost
+        android:layout_alwaysShow="true"
+        android:id="@+id/profile_tabhost"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentTop="true"
+        android:layout_centerHorizontal="true"
+        android:background="?attr/colorBackground">
+        <LinearLayout
+            android:orientation="vertical"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content">
+            <TabWidget
+                android:id="@android:id/tabs"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:visibility="gone">
+            </TabWidget>
+            <View
+                android:id="@+id/resolver_tab_divider"
+                android:visibility="gone"
+                android:layout_width="match_parent"
+                android:layout_height="1dp"
+                android:background="?attr/colorBackground"
+                android:foreground="?attr/dividerVertical"/>
+            <FrameLayout
+                android:id="@android:id/tabcontent"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content">
+                <com.android.internal.app.ResolverViewPager
+                    android:id="@+id/profile_pager"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content" />
+            </FrameLayout>
+        </LinearLayout>
+    </TabHost>
+
+    <View
+        android:layout_alwaysShow="true"
+        android:layout_width="match_parent"
+        android:layout_height="1dp"
+        android:background="?attr/colorBackground"
+        android:foreground="?attr/dividerVertical" />
+</com.android.internal.widget.ResolverDrawerLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/resolver_profile_tab_button.xml b/android-sdk/platforms/android-34/data/res/layout/resolver_profile_tab_button.xml
new file mode 100644
index 0000000000000000000000000000000000000000..fd168e6414f18f83db5220a044dfe429ea6bebcd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/resolver_profile_tab_button.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+    <Button
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:layout_width="0dp"
+        android:layout_height="36dp"
+        android:layout_weight="1"
+        android:layout_marginVertical="6dp"
+        android:layout_marginHorizontal="@dimen/resolver_profile_tab_margin"
+        android:background="@drawable/resolver_profile_tab_bg"
+        android:textColor="@color/resolver_profile_tab_text"
+        android:textSize="@dimen/resolver_tab_text_size"
+        android:textAppearance="@android:style/TextAppearance.DeviceDefault.DialogWindowTitle"
+        style="?android:attr/borderlessButtonStyle" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_challenge.xml b/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_challenge.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f41924cf13f63f28de69bba69436a682897f09fa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_challenge.xml
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used as the dialog's content View for EditTextPreference. -->
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:overScrollMode="ifContentScrolls">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical">
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:padding="8dip"
+            android:orientation="vertical">
+
+            <EditText android:id="@+id/pin_text"
+                android:layout_marginLeft="8dip"
+                android:layout_marginStart="8dip"
+                android:layout_marginRight="8dip"
+                android:layout_marginEnd="8dip"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:inputType="numberPassword"
+                android:textColor="?android:attr/textColorPrimary" />
+
+            <TextView android:id="@+id/pin_error_message"
+                android:layout_marginTop="8dp"
+                android:layout_marginBottom="8dp"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:text="@string/restr_pin_incorrect"
+                android:gravity="center"/>
+        </LinearLayout>
+
+        <LinearLayout android:id="@+id/buttonPanel"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:minHeight="@dimen/alert_dialog_button_bar_height"
+            android:orientation="vertical"
+            android:divider="?android:attr/dividerHorizontal"
+            android:showDividers="beginning"
+            android:dividerPadding="0dip">
+            <LinearLayout
+                style="?android:attr/buttonBarStyle"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:layoutDirection="locale"
+                android:measureWithLargestChild="true">
+                <Button android:id="@+id/pin_cancel_button"
+                    android:layout_width="wrap_content"
+                    android:layout_gravity="start"
+                    android:layout_weight="1"
+                    android:maxLines="2"
+                    android:minHeight="@dimen/alert_dialog_button_bar_height"
+                    style="?android:attr/buttonBarButtonStyle"
+                    android:textSize="14sp"
+                    android:layout_height="wrap_content"
+                    android:text="@string/cancel" />
+                <Button android:id="@+id/pin_ok_button"
+                    android:layout_width="wrap_content"
+                    android:layout_gravity="end"
+                    android:layout_weight="1"
+                    android:maxLines="2"
+                    style="?android:attr/buttonBarButtonStyle"
+                    android:textSize="14sp"
+                    android:minHeight="@dimen/alert_dialog_button_bar_height"
+                    android:layout_height="wrap_content"
+                    android:text="@string/ok" />
+            </LinearLayout>
+        </LinearLayout>
+    </LinearLayout>
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_setup.xml b/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_setup.xml
new file mode 100644
index 0000000000000000000000000000000000000000..03ed696adfe13468a3159b6b576d68a231092611
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/restrictions_pin_setup.xml
@@ -0,0 +1,77 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Layout used as the dialog's content View for EditTextPreference. -->
+<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_marginTop="48dp"
+    android:layout_marginBottom="48dp"
+    android:overScrollMode="ifContentScrolls">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:padding="8dip"
+        android:orientation="vertical">
+
+        <TextView android:id="@+id/pin_message"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_marginTop="16dp"
+            android:layout_marginBottom="16dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/restr_pin_create_pin"
+            android:textColor="?android:attr/textColorSecondary" />
+
+        <EditText android:id="@+id/pin_text"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_marginBottom="16dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:hint="@string/restr_pin_enter_old_pin"
+            android:inputType="numberPassword"
+            android:textColor="?android:attr/textColorPrimary" />
+
+        <EditText android:id="@+id/pin_new_text"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_marginBottom="16dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:hint="@string/restr_pin_enter_new_pin"
+            android:inputType="numberPassword"
+            android:textColor="?android:attr/textColorPrimary" />
+
+        <EditText android:id="@+id/pin_confirm_text"
+            style="?android:attr/textAppearanceMedium"
+            android:layout_marginBottom="16dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:hint="@string/restr_pin_confirm_pin"
+            android:inputType="numberPassword"
+            android:textColor="?android:attr/textColorPrimary" />
+
+        <TextView android:id="@+id/pin_error_message"
+            style="?android:attr/textAppearanceSmall"
+            android:layout_marginBottom="16dp"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/restr_pin_error_doesnt_match"
+            android:textColor="#FFFF0000" />
+
+    </LinearLayout>
+
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/safe_mode.xml b/android-sdk/platforms/android-34/data/res/layout/safe_mode.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8a8d19e01ebfd4eddf9f3b144ad968e0def75229
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/safe_mode.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content" android:layout_height="wrap_content"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:gravity="center"
+    android:padding="3dp"
+    android:background="@drawable/safe_mode_background"
+    android:textColor="@color/safe_mode_text"
+    android:text="@string/safeMode"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen.xml b/android-sdk/platforms/android-34/data/res/layout/screen.xml
new file mode 100644
index 0000000000000000000000000000000000000000..403ffd63debb1142a4a368f815d79526cb3ac195
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen.xml
@@ -0,0 +1,107 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is the basic layout for a screen, with all of its features enabled.
+-->
+
+<!-- Title bar and content -->
+<LinearLayout  xmlns:android="http://schemas.android.com/apk/res/android"
+    android:fitsSystemWindows="true"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+>
+    <!-- Popout bar for action modes -->
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+
+    <!-- Title bar -->
+    <RelativeLayout android:id="@android:id/title_container"
+        style="?android:attr/windowTitleBackgroundStyle"
+        android:layout_width="match_parent"
+        android:layout_height="?android:attr/windowTitleSize"
+    >
+        <ImageView android:id="@android:id/left_icon"
+            android:layout_width="16dip"
+            android:layout_height="16dip"
+            android:layout_marginEnd="5dip"
+            android:layout_alignParentStart="true"
+            android:layout_centerVertical="true"
+            android:visibility="gone"
+            android:scaleType="fitCenter"
+        />
+        <LinearLayout android:id="@+android:id/right_container"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignParentEnd="true"
+            android:layout_centerVertical="true"
+        >
+            <ImageView android:id="@android:id/right_icon"
+                android:layout_width="16dip"
+                android:layout_height="16dip"
+                android:layout_marginStart="5dip"
+                android:layout_gravity="center_vertical"
+                android:visibility="gone"
+                android:scaleType="fitCenter"
+            />
+            <ProgressBar android:id="@+id/progress_circular"
+                style="?android:attr/progressBarStyleSmallTitle"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_marginStart="5dip"
+                android:layout_gravity="center_vertical"
+                android:visibility="gone"
+                android:max="10000"
+            />
+        </LinearLayout>
+        <ProgressBar android:id="@+id/progress_horizontal"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="2dip"
+            android:layout_toStartOf="@android:id/right_container"
+            android:layout_toEndOf="@android:id/left_icon"
+            android:layout_centerVertical="true"
+            android:visibility="gone"
+            android:max="10000"
+        />
+        <TextView android:id="@android:id/title"
+            style="?android:attr/windowTitleStyle"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:background="@null"
+            android:fadingEdge="horizontal"
+            android:scrollHorizontally="true"
+            android:gravity="center_vertical"
+            android:layout_toStartOf="@android:id/right_container"
+            android:layout_toEndOf="@id/left_icon"
+        />
+    </RelativeLayout>
+
+    <!-- Content -->
+    <FrameLayout android:id="@android:id/content"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:foregroundGravity="fill_horizontal|top"
+        android:foreground="?android:attr/windowContentOverlay"
+    />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_action_bar.xml b/android-sdk/platforms/android-34/data/res/layout/screen_action_bar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4c1d6cb535398479676402d1bfaa65ee7d00f4be
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_action_bar.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen with the Action Bar enabled.
+-->
+
+<com.android.internal.widget.ActionBarOverlayLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/decor_content_parent"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:splitMotionEvents="false"
+    android:theme="?attr/actionBarTheme">
+    <FrameLayout android:id="@android:id/content"
+                 android:layout_width="match_parent"
+                 android:layout_height="match_parent" />
+    <com.android.internal.widget.ActionBarContainer
+        android:id="@+id/action_bar_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentTop="true"
+        style="?attr/actionBarStyle"
+        android:transitionName="android:action_bar"
+        android:touchscreenBlocksFocus="true"
+        android:keyboardNavigationCluster="true"
+        android:gravity="top">
+        <com.android.internal.widget.ActionBarView
+            android:id="@+id/action_bar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            style="?attr/actionBarStyle" />
+        <com.android.internal.widget.ActionBarContextView
+            android:id="@+id/action_context_bar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:visibility="gone"
+            style="?attr/actionModeStyle" />
+    </com.android.internal.widget.ActionBarContainer>
+    <com.android.internal.widget.ActionBarContainer android:id="@+id/split_action_bar"
+                  android:layout_width="match_parent"
+                  android:layout_height="wrap_content"
+                  style="?attr/actionBarSplitStyle"
+                  android:visibility="gone"
+                  android:touchscreenBlocksFocus="true"
+                  android:keyboardNavigationCluster="true"
+                  android:gravity="center"/>
+</com.android.internal.widget.ActionBarOverlayLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_custom_title.xml b/android-sdk/platforms/android-34/data/res/layout/screen_custom_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a3312dcf7867cd77081b3c022d83356360795a4d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_custom_title.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is a custom layout for a screen.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <!-- Popout bar for action modes -->
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+
+    <FrameLayout android:id="@android:id/title_container" 
+        android:layout_width="match_parent" 
+        android:layout_height="?android:attr/windowTitleSize"
+        android:transitionName="android:title"
+        style="?android:attr/windowTitleBackgroundStyle">
+    </FrameLayout>
+    <FrameLayout android:id="@android:id/content"
+        android:layout_width="match_parent" 
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:foregroundGravity="fill_horizontal|top"
+        android:foreground="?android:attr/windowContentOverlay" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_progress.xml b/android-sdk/platforms/android-34/data/res/layout/screen_progress.xml
new file mode 100644
index 0000000000000000000000000000000000000000..e70f2ec0a372afa516c557e3150f43c7884c1dd6
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_progress.xml
@@ -0,0 +1,82 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/screen_full.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+
+This is the basic layout for a screen, with all of its features enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:fitsSystemWindows="true"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+>
+    <!-- Popout bar for action modes -->
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+
+    <RelativeLayout android:id="@android:id/title_container" 
+        style="?android:attr/windowTitleBackgroundStyle"
+        android:layout_width="match_parent" 
+        android:layout_height="?android:attr/windowTitleSize"
+    >
+        <ProgressBar android:id="@+android:id/progress_circular"
+            style="?android:attr/progressBarStyleSmallTitle"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="5dip"
+            android:layout_alignParentEnd="true"
+            android:layout_centerVertical="true"
+            android:visibility="gone"
+            android:max="10000"
+        />
+        <ProgressBar android:id="@+android:id/progress_horizontal"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="2dip"
+            android:layout_alignParentStart="true"
+            android:layout_toStartOf="@android:id/progress_circular"
+            android:layout_centerVertical="true"
+            android:visibility="gone"
+            android:max="10000" 
+        />
+        <TextView android:id="@android:id/title"
+            style="?android:attr/windowTitleStyle"
+            android:layout_width="match_parent" 
+            android:layout_height="match_parent"
+            android:layout_alignParentStart="true"
+            android:layout_toStartOf="@android:id/progress_circular"
+            android:background="@null"
+            android:fadingEdge="horizontal"
+            android:gravity="center_vertical"
+            android:scrollHorizontally="true" 
+        />
+    </RelativeLayout>
+    <FrameLayout android:id="@android:id/content"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:foregroundGravity="fill_horizontal|top"
+        android:foreground="?android:attr/windowContentOverlay"
+    />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_simple.xml b/android-sdk/platforms/android-34/data/res/layout/screen_simple.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6111348acd08d5a54738da64a3e35797a2122dcf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_simple.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/screen_simple.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:fitsSystemWindows="true"
+    android:orientation="vertical">
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+    <FrameLayout
+         android:id="@android:id/content"
+         android:layout_width="match_parent"
+         android:layout_height="match_parent"
+         android:foregroundInsidePadding="false"
+         android:foregroundGravity="fill_horizontal|top"
+         android:foreground="?android:attr/windowContentOverlay" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_simple_overlay_action_mode.xml b/android-sdk/platforms/android-34/data/res/layout/screen_simple_overlay_action_mode.xml
new file mode 100644
index 0000000000000000000000000000000000000000..52b893b316d49afaa237d2ec5ead413046500149
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_simple_overlay_action_mode.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:fitsSystemWindows="true">
+    <FrameLayout
+         android:id="@android:id/content"
+         android:layout_width="match_parent"
+         android:layout_height="match_parent"
+         android:foregroundInsidePadding="false"
+         android:foregroundGravity="fill_horizontal|top"
+         android:foreground="?android:attr/windowContentOverlay" />
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_title.xml b/android-sdk/platforms/android-34/data/res/layout/screen_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..409e9c6ec2b39c11b3065bc401cfc0b4edb4ba8d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_title.xml
@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen, with the minimum set of features
+enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:fitsSystemWindows="true">
+    <!-- Popout bar for action modes -->
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme" />
+    <FrameLayout
+        android:layout_width="match_parent" 
+        android:layout_height="?android:attr/windowTitleSize"
+        style="?android:attr/windowTitleBackgroundStyle">
+        <TextView android:id="@android:id/title" 
+            style="?android:attr/windowTitleStyle"
+            android:background="@null"
+            android:fadingEdge="horizontal"
+            android:gravity="center_vertical"
+            android:layout_width="match_parent"
+            android:layout_height="match_parent" />
+    </FrameLayout>
+    <FrameLayout android:id="@android:id/content"
+        android:layout_width="match_parent" 
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:foregroundGravity="fill_horizontal|top"
+        android:foreground="?android:attr/windowContentOverlay" />
+</LinearLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_title_icons.xml b/android-sdk/platforms/android-34/data/res/layout/screen_title_icons.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f145429b4702bf9524667156a6fd21ecb9adc6ae
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_title_icons.xml
@@ -0,0 +1,104 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is the basic layout for a screen, with all of its features enabled.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:fitsSystemWindows="true"
+    android:orientation="vertical"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+    <!-- Popout bar for action modes -->
+    <ViewStub android:id="@+id/action_mode_bar_stub"
+              android:inflatedId="@+id/action_mode_bar"
+              android:layout="@layout/action_mode_bar"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:theme="?attr/actionBarTheme"/>
+    <RelativeLayout android:id="@android:id/title_container"
+        style="?android:attr/windowTitleBackgroundStyle"
+        android:layout_width="match_parent"
+        android:layout_height="?android:attr/windowTitleSize">
+        <!-- The title background has 9px left padding. -->
+        <ImageView android:id="@android:id/left_icon"
+            android:visibility="gone"
+            android:layout_marginEnd="9dip"
+            android:layout_width="16dip"
+            android:layout_height="16dip"
+            android:scaleType="fitCenter"
+            android:layout_alignParentStart="true"
+            android:layout_centerVertical="true" />
+        <ProgressBar android:id="@+id/progress_circular"
+            style="?android:attr/progressBarStyleSmallTitle"
+            android:visibility="gone"
+            android:max="10000"
+            android:layout_centerVertical="true"
+            android:layout_alignParentEnd="true"
+            android:layout_marginStart="6dip"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" />
+        <!-- There are 6dip between this and the circular progress on the right, we
+             also make 6dip (with the -3dip margin_left) to the icon on the left or
+             the screen left edge if no icon. This also places our left edge 3dip to
+             the left of the title text left edge. -->
+        <ProgressBar android:id="@+id/progress_horizontal"
+            style="?android:attr/progressBarStyleHorizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="-3dip"
+            android:layout_toStartOf="@android:id/progress_circular"
+            android:layout_toEndOf="@android:id/left_icon"
+            android:layout_centerVertical="true"
+            android:visibility="gone"
+            android:max="10000" />
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="match_parent"
+            android:orientation="horizontal"
+            android:layout_toStartOf="@id/progress_circular"
+            android:layout_toEndOf="@android:id/left_icon"
+            >
+            <TextView android:id="@android:id/title"
+                style="?android:attr/windowTitleStyle"
+                android:layout_width="0dip"
+                android:layout_height="match_parent"
+                android:layout_weight="1"
+                android:background="@null"
+                android:fadingEdge="horizontal"
+                android:scrollHorizontally="true"
+                android:gravity="center_vertical"
+                android:layout_marginEnd="2dip"
+                />
+            <!-- 2dip between the icon and the title text, if icon is present. -->
+            <ImageView android:id="@android:id/right_icon"
+                android:visibility="gone"
+                android:layout_width="16dip"
+                android:layout_height="16dip"
+                android:layout_weight="0"
+                android:layout_gravity="center_vertical"
+                android:scaleType="fitCenter"
+                />
+            </LinearLayout>
+    </RelativeLayout>
+    <FrameLayout android:id="@android:id/content"
+        android:layout_width="match_parent"
+        android:layout_height="0dip"
+        android:layout_weight="1"
+        android:foregroundGravity="fill_horizontal|top"
+        android:foreground="?android:attr/windowContentOverlay" />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/screen_toolbar.xml b/android-sdk/platforms/android-34/data/res/layout/screen_toolbar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ded252798441079b1556f22b36a6dd564e8ab0f0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/screen_toolbar.xml
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+This is an optimized layout for a screen with a toolbar enabled.
+-->
+
+<com.android.internal.widget.ActionBarOverlayLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/decor_content_parent"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:splitMotionEvents="false"
+    android:theme="?attr/actionBarTheme">
+    <FrameLayout android:id="@android:id/content"
+                 android:layout_width="match_parent"
+                 android:layout_height="match_parent" />
+    <com.android.internal.widget.ActionBarContainer
+        android:id="@+id/action_bar_container"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_alignParentTop="true"
+        style="?attr/actionBarStyle"
+        android:transitionName="android:action_bar"
+        android:touchscreenBlocksFocus="true"
+        android:keyboardNavigationCluster="true"
+        android:gravity="top">
+        <Toolbar
+            android:id="@+id/action_bar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:navigationContentDescription="@string/action_bar_up_description"
+            style="?attr/toolbarStyle" />
+        <com.android.internal.widget.ActionBarContextView
+            android:id="@+id/action_context_bar"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:visibility="gone"
+            style="?attr/actionModeStyle" />
+    </com.android.internal.widget.ActionBarContainer>
+</com.android.internal.widget.ActionBarOverlayLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/search_bar.xml b/android-sdk/platforms/android-34/data/res/layout/search_bar.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c81c716b04b63fa169d557fc79aa810257c368e0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/search_bar.xml
@@ -0,0 +1,80 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<view
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    class="android.app.SearchDialog$SearchBar"
+    android:id="@+id/search_bar"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:background="@color/transparent"
+    android:focusable="true"
+    android:descendantFocusability="afterDescendants">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?android:attr/actionModeBackground"
+        android:orientation="horizontal">
+
+        <!-- Grouped to allow tapping on either item to exit search mode -->
+        <LinearLayout
+            android:id="@id/closeButton"
+            android:layout_width="wrap_content"
+            android:layout_height="48dp"
+            android:orientation="horizontal"
+            android:focusable="true"
+            android:background="?android:attr/selectableItemBackground">
+
+            <ImageView
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center_vertical"
+                android:src="?android:attr/homeAsUpIndicator"/>
+
+            <ImageView
+                android:id="@+id/search_app_icon"
+                android:layout_height="32dip"
+                android:layout_width="32dip"
+                android:layout_gravity="center_vertical"
+                android:scaleType="centerInside"
+            />
+
+        </LinearLayout>
+
+        <!-- Actual search view with search icon, text field, close
+            and voice buttons -->
+        <SearchView
+            android:id="@+id/search_view"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:maxWidth="600dip"
+            android:layout_gravity="center_vertical"
+            />
+
+    </LinearLayout>
+
+    <ImageView
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:scaleType="fitXY"
+        android:src="@drawable/ab_solid_shadow_holo"/>
+</view>
diff --git a/android-sdk/platforms/android-34/data/res/layout/search_dropdown_item_icons_2line.xml b/android-sdk/platforms/android-34/data/res/layout/search_dropdown_item_icons_2line.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b135e3d3f5aba16c1f8f5e0ebaec9ab55cc05ee8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/search_dropdown_item_icons_2line.xml
@@ -0,0 +1,88 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:paddingStart="@dimen/dropdownitem_text_padding_left"
+    android:paddingEnd="4dip"
+    android:layout_width="match_parent"
+    android:layout_height="?attr/searchResultListItemHeight" >
+
+    <!-- Icons come first in the layout, since their placement doesn't depend on
+         the placement of the text views. -->
+    <ImageView android:id="@id/icon1"
+        android:layout_width="@dimen/dropdownitem_icon_width"
+        android:layout_height="48dip"
+        android:scaleType="centerInside"
+        android:layout_alignParentStart="true"
+        android:layout_alignParentTop="true"
+        android:layout_alignParentBottom="true"
+        android:visibility="invisible" />
+
+    <ImageView android:id="@+id/edit_query"
+        android:layout_width="48dip"
+        android:layout_height="48dip"
+        android:scaleType="centerInside"
+        android:layout_alignParentEnd="true"
+        android:layout_alignParentTop="true"
+        android:layout_alignParentBottom="true"
+        android:background="?attr/selectableItemBackground"
+        android:visibility="gone" />
+
+    <ImageView android:id="@id/icon2"
+        android:layout_width="48dip"
+        android:layout_height="48dip"
+        android:scaleType="centerInside"
+        android:layout_alignWithParentIfMissing="true"
+        android:layout_toStartOf="@id/edit_query"
+        android:layout_alignParentTop="true"
+        android:layout_alignParentBottom="true"
+        android:visibility="gone" />
+
+
+    <!-- The subtitle comes before the title, since the height of the title depends on whether the
+         subtitle is visible or gone. -->
+    <TextView android:id="@id/text2"
+        style="?attr/dropDownItemStyle"
+        android:textAppearance="?attr/textAppearanceSearchResultSubtitle"
+        android:singleLine="true"
+        android:layout_width="match_parent"
+        android:layout_height="29dip"
+        android:paddingBottom="4dip"
+        android:gravity="top"
+        android:layout_toEndOf="@id/icon1"
+        android:layout_toStartOf="@id/icon2"
+        android:layout_alignWithParentIfMissing="true"
+        android:layout_alignParentBottom="true"
+        android:visibility="gone" />
+
+    <!-- The title is placed above the subtitle, if there is one. If there is no
+         subtitle, it fills the parent. -->
+    <TextView android:id="@id/text1"
+        style="?attr/dropDownItemStyle"
+        android:textAppearance="?attr/textAppearanceSearchResultTitle"
+        android:singleLine="true"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_centerVertical="true"
+        android:layout_toEndOf="@id/icon1"
+        android:layout_toStartOf="@id/icon2"
+        android:layout_above="@id/text2" />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/search_view.xml b/android-sdk/platforms/android-34/data/res/layout/search_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..39034dc6162029765c14b6ca4bd4ced533839fa1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/search_view.xml
@@ -0,0 +1,139 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+-->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/search_bar"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="horizontal">
+
+    <!-- This is actually used for the badge icon *or* the badge label (or neither) -->
+    <TextView
+        android:id="@+id/search_badge"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:gravity="center_vertical"
+        android:layout_marginBottom="2dip"
+        android:drawablePadding="0dip"
+        android:textAppearance="?attr/textAppearanceMedium"
+        android:textColor="?attr/textColorPrimary"
+        android:visibility="gone" />
+
+    <ImageView
+        android:id="@+id/search_button"
+        style="?attr/actionButtonStyle"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_gravity="center_vertical"
+        android:focusable="true"
+        android:contentDescription="@string/searchview_description_search"
+        android:tooltipText="@string/searchview_description_search" />
+
+    <LinearLayout
+        android:id="@+id/search_edit_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_weight="1"
+        android:layout_marginStart="8dip"
+        android:layout_marginEnd="8dip"
+        android:orientation="horizontal"
+        android:layoutDirection="locale">
+
+        <ImageView
+            android:id="@+id/search_mag_icon"
+            android:layout_width="@dimen/dropdownitem_icon_width"
+            android:layout_height="wrap_content"
+            android:scaleType="centerInside"
+            android:layout_marginStart="@dimen/dropdownitem_text_padding_left"
+            android:layout_gravity="center_vertical"
+            android:visibility="gone" />
+
+        <!-- Inner layout contains the app icon, button(s) and EditText -->
+        <LinearLayout
+            android:id="@+id/search_plate"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_weight="1"
+            android:layout_gravity="center_vertical"
+            android:orientation="horizontal">
+
+            <view class="android.widget.SearchView$SearchAutoComplete"
+                android:id="@+id/search_src_text"
+                android:layout_height="36dip"
+                android:layout_width="0dp"
+                android:layout_weight="1"
+                android:layout_gravity="center_vertical"
+                android:paddingStart="@dimen/dropdownitem_text_padding_left"
+                android:paddingEnd="@dimen/dropdownitem_text_padding_right"
+                android:singleLine="true"
+                android:ellipsize="end"
+                android:background="@null"
+                android:inputType="text|textAutoComplete|textNoSuggestions"
+                android:imeOptions="actionSearch"
+                android:dropDownHeight="wrap_content"
+                android:dropDownAnchor="@id/search_edit_frame"
+                android:dropDownVerticalOffset="0dip"
+                android:dropDownHorizontalOffset="0dip" />
+
+            <ImageView
+                android:id="@+id/search_close_btn"
+                android:layout_width="wrap_content"
+                android:layout_height="match_parent"
+                android:paddingStart="12dip"
+                android:paddingEnd="12dip"
+                android:layout_gravity="center_vertical"
+                android:background="?attr/selectableItemBackgroundBorderless"
+                android:focusable="true"
+                android:contentDescription="@string/searchview_description_clear" />
+
+        </LinearLayout>
+
+        <LinearLayout
+            android:id="@+id/submit_area"
+            android:orientation="horizontal"
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent">
+
+            <ImageView
+                android:id="@+id/search_go_btn"
+                android:layout_width="wrap_content"
+                android:layout_height="match_parent"
+                android:layout_gravity="center_vertical"
+                android:paddingStart="16dip"
+                android:paddingEnd="16dip"
+                android:background="?attr/selectableItemBackgroundBorderless"
+                android:visibility="gone"
+                android:focusable="true"
+                android:contentDescription="@string/searchview_description_submit" />
+
+            <ImageView
+                android:id="@+id/search_voice_btn"
+                android:layout_width="wrap_content"
+                android:layout_height="match_parent"
+                android:layout_gravity="center_vertical"
+                android:paddingStart="16dip"
+                android:paddingEnd="16dip"
+                android:background="?attr/selectableItemBackgroundBorderless"
+                android:visibility="gone"
+                android:focusable="true"
+                android:contentDescription="@string/searchview_description_voice" />
+        </LinearLayout>
+    </LinearLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..eb4d8d9a70ed48b4a7fed6a281a6e3ec1c813f01
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/select_dialog.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the ListView to display the items.
+    Assign an ID so its state will be saved/restored.
+-->
+<view class="com.android.internal.app.AlertController$RecycleListView"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/select_dialog_listview"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:layout_marginTop="5px"
+    android:cacheColorHint="@null"
+    android:divider="?android:attr/listDividerAlertDialog"
+    android:scrollbars="vertical"
+    android:overScrollMode="ifContentScrolls"
+    android:textAlignment="viewStart" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_holo.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8a92283e792c88dbe0d85276ddd8a42a35f9b770
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_holo.xml
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the ListView to display the items.
+    Assign an ID so its state will be saved/restored.
+-->
+<view class="com.android.internal.app.AlertController$RecycleListView"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+android:id/select_dialog_listview"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:cacheColorHint="@null"
+    android:divider="?android:attr/listDividerAlertDialog"
+    android:scrollbars="vertical"
+    android:overScrollMode="ifContentScrolls"
+    android:textAlignment="viewStart" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_item.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..835c433b6164681cd228ef9cb43e6749f7a88695
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/select_dialog_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the TextView to display individual
+    items.
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="14dip"
+    android:paddingEnd="15dip"
+    android:ellipsize="marquee"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_holo.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..62be4068ca53b799aca166ef017951f73c7b83fa
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_holo.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the TextView to display individual
+    items.
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="16dip"
+    android:paddingEnd="16dip"
+    android:ellipsize="marquee"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b45edc6218ec6a2dda0a0e722215c0335c9ada41
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_item_material.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the TextView to display individual
+    items.
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd"
+    android:ellipsize="marquee" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_material.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9a068f9adaec8ce73f6c9ce1dee1880225b02a15
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_material.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!--
+    This layout file is used by the AlertDialog when displaying a list of items.
+    This layout file is inflated and used as the ListView to display the items.
+    Assign an ID so its state will be saved/restored.
+-->
+<view class="com.android.internal.app.AlertController$RecycleListView"
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@id/select_dialog_listview"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:cacheColorHint="@null"
+    android:divider="?attr/listDividerAlertDialog"
+    android:scrollbars="vertical"
+    android:overScrollMode="ifContentScrolls"
+    android:textAlignment="viewStart"
+    android:clipToPadding="false"
+    android:paddingBottomNoButtons="@dimen/dialog_list_padding_bottom_no_buttons"
+    android:paddingTopNoTitle="@dimen/dialog_list_padding_top_no_title" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2dd83a34b3058785305d5e7c54db455ccaecbe7d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="12dip"
+    android:paddingEnd="7dip"
+    android:checkMark="?android:attr/listChoiceIndicatorMultiple"
+    android:ellipsize="marquee"
+/>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_holo.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..40125b7395a6188c5cda112fd1e4c7641b6cde34
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_holo.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceMedium"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="16dip"
+    android:paddingEnd="16dip"
+    android:checkMark="?android:attr/listChoiceIndicatorMultiple"
+    android:ellipsize="marquee"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_material.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..731fe16196345e95a6f074ec97e1fce623160494
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_multichoice_material.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:textAppearance="?attr/textAppearanceMedium"
+    android:textColor="?attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="@dimen/select_dialog_padding_start_material"
+    android:paddingEnd="?attr/dialogPreferredPadding"
+    android:drawableStart="?attr/listChoiceIndicatorMultiple"
+    android:drawablePadding="@dimen/select_dialog_drawable_padding_start_material"
+    android:ellipsize="marquee" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1e18b447888c79284f9656c80c489373300b9de1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:textAppearance="?android:attr/textAppearanceLarge"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="12dip"
+    android:paddingEnd="7dip"
+    android:checkMark="?android:attr/listChoiceIndicatorSingle"
+    android:ellipsize="marquee"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_holo.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..545ec60af4dd16545dcf04d6652e31d4d0304481
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_holo.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceMedium"
+    android:textColor="?android:attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="16dip"
+    android:paddingEnd="16dip"
+    android:checkMark="?android:attr/listChoiceIndicatorSingle"
+    android:ellipsize="marquee"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_material.xml b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..77b693058e82d30818d89ff9ba554bbe0255f5b3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/select_dialog_singlechoice_material.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:textAppearance="?attr/textAppearanceMedium"
+    android:textColor="?attr/textColorAlertDialogListItem"
+    android:gravity="center_vertical"
+    android:paddingStart="@dimen/select_dialog_padding_start_material"
+    android:paddingEnd="?attr/dialogPreferredPadding"
+    android:drawableStart="?attr/listChoiceIndicatorSingle"
+    android:drawablePadding="@dimen/select_dialog_drawable_padding_start_material"
+    android:ellipsize="marquee" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/shutdown_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/shutdown_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ec67aa86bcc9dc94a8ed5197916969ff3fbd562d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/shutdown_dialog.xml
@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical"
+    android:gravity="center_horizontal" >
+
+    <Space
+        android:layout_width="match_parent"
+        android:layout_height="0dp"
+        android:layout_weight="6" />
+
+    <TextView
+        android:id="@id/text1"
+        android:layout_width="wrap_content"
+        android:layout_height="32sp"
+        android:text="@string/shutdown_progress"
+        android:textDirection="locale"
+        android:textSize="18sp"
+        android:textAppearance="?attr/textAppearanceMedium"
+        android:gravity="center"
+        android:layout_marginBottom="24dp"
+        android:visibility="gone"
+        android:fontFamily="@string/config_headlineFontFamily"/>
+
+    <TextView
+        android:id="@+id/text2"
+        android:layout_width="wrap_content"
+        android:layout_height="32sp"
+        android:text="@string/shutdown_progress"
+        android:textDirection="locale"
+        android:textSize="24sp"
+        android:textAppearance="?attr/textAppearanceLarge"
+        android:gravity="center"
+        android:layout_marginBottom="24dp"
+        android:fontFamily="@string/config_headlineFontFamily"/>
+
+    <ProgressBar
+        android:id="@id/progress"
+        android:layout_width="30dp"
+        android:layout_height="30dp"
+        style="?attr/progressBarStyleLarge" />
+
+    <Space
+        android:layout_width="match_parent"
+        android:layout_height="0dp"
+        android:layout_weight="10" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/side_fps_toast.xml b/android-sdk/platforms/android-34/data/res/layout/side_fps_toast.xml
new file mode 100644
index 0000000000000000000000000000000000000000..96860b050393caf0cdb17cb58905178edea199bf
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/side_fps_toast.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="wrap_content"
+              android:layout_height="wrap_content"
+              android:minWidth="350dp"
+              android:layout_gravity="center"
+              android:background="@color/side_fps_toast_background">
+    <TextView
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:text="@string/fp_power_button_enrollment_title"
+        android:singleLine="true"
+        android:ellipsize="end"
+        android:textColor="@color/side_fps_text_color"
+        android:paddingLeft="20dp"/>
+    <Space
+        android:layout_width="wrap_content"
+        android:layout_height="match_parent"
+        android:layout_weight="1"/>
+    <Button
+        android:id="@+id/turn_off_screen"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:text="@string/fp_power_button_enrollment_button_text"
+        android:paddingRight="20dp"
+        style="?android:attr/buttonBarNegativeButtonStyle"
+        android:textColor="@color/side_fps_button_color"
+        android:maxLines="1"/>
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_account_item.xml b/android-sdk/platforms/android-34/data/res/layout/simple_account_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..29e42af3e771c66d2de58f2a61879802b43d85ed
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_account_item.xml
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+   Copyright (C) 2014 The Android Open Source Project.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/scrollbarSize">
+
+    <ImageView
+        android:id="@id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center"/>
+    <RelativeLayout
+        android:layout_width="0dip"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="10dip"
+        android:layout_marginEnd="6dip"
+        android:layout_marginTop="6dip"
+        android:layout_marginBottom="6dip"
+        android:layout_weight="1">
+        <TextView android:id="@id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:singleLine="true"
+            android:ellipsize="none"
+            android:textAppearance="?attr/textAppearanceListItem" />
+        <TextView android:id="@id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/title"
+            android:layout_alignStart="@id/title"
+            android:singleLine="true"
+            android:ellipsize="none"
+            android:textAppearance="?attr/textAppearanceListItemSecondary"
+            android:textColor="?attr/textColorSecondary"/>
+    </RelativeLayout>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_hint.xml b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_hint.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2583339e2911a2ba7ceda7e371ee3e25205c54c3
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_hint.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:textAppearance="?android:attr/dropDownHintAppearance"
+    android:singleLine="true"
+    android:layout_marginStart="3dip"
+    android:layout_marginTop="3dip"
+    android:layout_marginEnd="3dip"
+    android:layout_marginBottom="3dip"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_1line.xml b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_1line.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3ec930c528d77bcf4e1396ac4d7d7c85ffd3be19
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_1line.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/simple_spinner_item.xml
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:id="@android:id/text1"
+    style="?android:attr/dropDownItemStyle"
+    android:textAppearance="?android:attr/textAppearanceLargePopupMenu"
+    android:singleLine="true"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeight"
+    android:ellipsize="marquee" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_2line.xml b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_2line.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c7093b4881b6959be6bcfc22390a3fd01d5abf1e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_dropdown_item_2line.xml
@@ -0,0 +1,58 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/simple_spinner_item.xml
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeight"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:baselineAligned="false"
+    >
+    
+    <TwoLineListItem
+        android:paddingTop="2dip"
+        android:paddingBottom="2dip"
+        android:layout_width="0dip"
+        android:layout_weight="1"
+        android:layout_height="wrap_content"
+        android:mode="twoLine" >
+    
+        <TextView
+            android:id="@android:id/text1"
+            style="?android:attr/dropDownItemStyle"
+            android:textAppearance="?android:attr/textAppearanceLargePopupMenu"
+            android:singleLine="true"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content" />
+    
+        <TextView
+            android:id="@android:id/text2"
+            style="?android:attr/dropDownItemStyle"
+            android:textAppearance="?android:attr/textAppearanceSmallPopupMenu"
+            android:textColor="#323232"
+            android:singleLine="true"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_below="@android:id/text1"
+            android:layout_alignStart="@android:id/text1" />
+    
+    </TwoLineListItem>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_1.xml b/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7cce12a13d459c98fa061f1972e6407140797537
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_1.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeight"
+    android:paddingStart="?android:attr/expandableListPreferredItemPaddingLeft"
+    android:textAppearance="?android:attr/textAppearanceListItem"
+    android:gravity="center_vertical"
+    android:textAlignment="viewStart"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_2.xml b/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..da60d7a5e03f9e4165267f5b43f7e6ca242db0a4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_expandable_list_item_2.xml
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TwoLineListItem xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeight"
+    android:paddingTop="2dip"
+    android:paddingBottom="2dip"
+    android:paddingStart="?android:attr/expandableListPreferredItemPaddingLeft"
+    android:mode="twoLine"
+>
+
+    <TextView android:id="@android:id/text1"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="6dip"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        android:textAlignment="viewStart"
+    />
+
+    <TextView android:id="@android:id/text2"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_below="@android:id/text1"
+        android:layout_alignStart="@android:id/text1"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:textAlignment="viewStart"
+    />
+
+</TwoLineListItem>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_gallery_item.xml b/android-sdk/platforms/android-34/data/res/layout/simple_gallery_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..28cb15b6cbfe90bbb960911dbab9fa6473d93a8f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_gallery_item.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/simple_gallery_item.xml
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/text1"
+    android:textAppearance="?android:attr/textAppearanceMedium"
+    android:textColor="?android:attr/textColorPrimaryDisableOnly"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+	android:maxLines="1" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_1.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..43a5635feeca4b7ca7848d970ff52935d23206ce
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_1.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..bcbc6fc8e616b4ee242d346f0571170151a459c2
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TwoLineListItem xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?attr/listPreferredItemHeight"
+    android:mode="twoLine"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?attr/listPreferredItemPaddingEnd">
+
+    <TextView android:id="@id/text1"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="8dp"
+        android:textAppearance="?attr/textAppearanceListItem" />
+
+    <TextView android:id="@id/text2"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_below="@id/text1"
+        android:layout_alignStart="@id/text1"
+        android:textAppearance="?attr/textAppearanceListItemSecondary" />
+
+</TwoLineListItem>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2_single_choice.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2_single_choice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..6cdb88bc10a52e2ce9415f8533e4ace0e6dafc02
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_2_single_choice.xml
@@ -0,0 +1,63 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:paddingStart="?attr/listPreferredItemPaddingStart"
+    android:paddingEnd="12dip"
+    android:minHeight="?attr/listPreferredItemHeightSmall"
+    android:background="@color/transparent">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:orientation="vertical"
+        android:gravity="center_vertical">
+
+        <TextView android:id="@android:id/text1"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="?attr/textAppearanceListItem"
+            android:textColor="?attr/textColorAlertDialogListItem"
+            android:gravity="center_vertical|start"
+            android:singleLine="true"
+            android:ellipsize="marquee" />
+        
+        <TextView android:id="@android:id/text2"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textAppearance="?attr/textAppearanceListItemSecondary"
+            android:textColor="?attr/textColorAlertDialogListItem"
+            android:gravity="center_vertical|start"
+            android:singleLine="true"
+            android:ellipsize="marquee" />
+        
+    </LinearLayout>
+
+    <RadioButton
+        android:id="@+id/radio"
+        android:layout_width="35dip"
+        android:layout_height="wrap_content"
+        android:paddingEnd="12dip"
+        android:gravity="center_vertical"
+        android:focusable="false"
+        android:clickable="false" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_1.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_1.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9b778d7b9285b53362264645b4ff5d0965eba72f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_1.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_2.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_2.xml
new file mode 100644
index 0000000000000000000000000000000000000000..50368130f1d57348789a479a0b853d57ca0259a1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_activated_2.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TwoLineListItem xmlns:android="http://schemas.android.com/apk/res/android"
+    android:paddingTop="2dip"
+    android:paddingBottom="2dip"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:mode="twoLine">
+
+    <TextView android:id="@android:id/text1"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="?android:attr/listPreferredItemPaddingStart"
+        android:layout_marginTop="6dip"
+        android:textAppearance="?android:attr/textAppearanceListItem" />
+
+    <TextView android:id="@android:id/text2"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_below="@android:id/text1"
+        android:layout_alignStart="@android:id/text1"
+        android:textAppearance="?android:attr/textAppearanceListItemSecondary" />
+
+</TwoLineListItem>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_checked.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_checked.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4673e2797d8030fe67594d23e67b4773db54b798
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_checked.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:checkMark="?android:attr/textCheckMark"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_multiple_choice.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_multiple_choice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..440b6fd8e1b11ecdc67c9ceef217876140d3521f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_multiple_choice.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:checkMark="?android:attr/listChoiceIndicatorMultiple"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_list_item_single_choice.xml b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_single_choice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..02cb7f77645ce080a1d2127252cd25aa1f26efdd
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_list_item_single_choice.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeightSmall"
+    android:textAppearance="?android:attr/textAppearanceListItemSmall"
+    android:gravity="center_vertical"
+    android:checkMark="?android:attr/listChoiceIndicatorSingle"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_selectable_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/simple_selectable_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..40f0ed6d82333db0f103859a512cfdeda94b25f0
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_selectable_list_item.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/listPreferredItemHeight"
+    android:textAppearance="?android:attr/textAppearanceListItem"
+    android:gravity="center_vertical"
+    android:background="?android:attr/listChoiceBackgroundIndicator"
+    android:paddingStart="8dip"
+    android:paddingEnd="8dip"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_spinner_dropdown_item.xml b/android-sdk/platforms/android-34/data/res/layout/simple_spinner_dropdown_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..f276cfaa2a68500b03534b334bfbee7996838f4a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_spinner_dropdown_item.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/simple_spinner_item.xml
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    style="?android:attr/spinnerDropDownItemStyle"
+    android:singleLine="true"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/dropdownListPreferredItemHeight"
+    android:ellipsize="marquee"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/simple_spinner_item.xml b/android-sdk/platforms/android-34/data/res/layout/simple_spinner_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5c7685e005ce197ecaa0a5636f7e889445505542
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/simple_spinner_item.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/simple_spinner_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:id="@android:id/text1"
+    style="?android:attr/spinnerItemStyle"
+    android:singleLine="true"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:ellipsize="marquee"
+    android:textAlignment="inherit"/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_grid.xml b/android-sdk/platforms/android-34/data/res/layout/slice_grid.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4cb78e1c41ad6e0219130982edd56a0315ea9658
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_grid.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.app.slice.widget.GridView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:gravity="center_vertical"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+</android.app.slice.widget.GridView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_message.xml b/android-sdk/platforms/android-34/data/res/layout/slice_message.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9e0cfe7fcacbc3719454fa3e5957bb897d02ed97
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_message.xml
@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.app.slice.widget.MessageView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:paddingTop="12dp"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+
+    <LinearLayout
+        android:id="@android:id/icon_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="-4dp"
+        android:gravity="start|center_vertical"
+        android:orientation="horizontal"
+        android:paddingEnd="12dp"
+        android:paddingTop="4dp"
+        android:paddingBottom="4dp">
+        <!-- TODO: Support text source -->
+        <ImageView
+            android:id="@android:id/icon"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:maxWidth="48dp"
+            android:maxHeight="48dp" />
+    </LinearLayout>
+
+    <TextView android:id="@android:id/summary"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignStart="@android:id/title"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        android:maxLines="10" />
+</android.app.slice.widget.MessageView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_message_local.xml b/android-sdk/platforms/android-34/data/res/layout/slice_message_local.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d806ddd1432c01440b2a66a347746d0914d0e0f5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_message_local.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<android.app.slice.widget.MessageView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:gravity="center_vertical|end"
+    android:paddingTop="12dp"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+
+    <TextView android:id="@android:id/summary"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignStart="@android:id/title"
+        android:layout_gravity="end"
+        android:gravity="end"
+        android:padding="8dp"
+        android:textAppearance="?android:attr/textAppearanceListItem"
+        android:background="#ffeeeeee"
+        android:maxLines="10" />
+
+</android.app.slice.widget.MessageView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_remote_input.xml b/android-sdk/platforms/android-34/data/res/layout/slice_remote_input.xml
new file mode 100644
index 0000000000000000000000000000000000000000..670c1e911ebb5f4e188927c38962967387d12163
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_remote_input.xml
@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- LinearLayout -->
+<android.app.slice.widget.RemoteInputView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:id="@+id/remote_input"
+        android:background="@drawable/slice_remote_input_bg"
+        android:layout_height="match_parent"
+        android:layout_width="match_parent">
+
+    <view class="com.android.internal.app.slice.widget.RemoteInputView$RemoteEditText"
+            android:id="@+id/remote_input_text"
+            android:layout_height="match_parent"
+            android:layout_width="0dp"
+            android:layout_weight="1"
+            android:paddingTop="2dp"
+            android:paddingBottom="4dp"
+            android:paddingStart="16dp"
+            android:paddingEnd="12dp"
+            android:gravity="start|center_vertical"
+            android:textAppearance="?android:attr/textAppearance"
+            android:textColor="#FFFFFFFF"
+            android:textColorHint="#99ffffff"
+            android:textSize="16sp"
+            android:background="@null"
+            android:singleLine="true"
+            android:ellipsize="start"
+            android:inputType="textShortMessage|textAutoCorrect|textCapSentences"
+            android:imeOptions="actionSend|flagNoExtractUi|flagNoFullscreen" />
+
+    <FrameLayout
+            android:layout_width="wrap_content"
+            android:layout_height="match_parent"
+            android:layout_gravity="center_vertical">
+
+        <ImageButton
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_gravity="center"
+                android:paddingStart="12dp"
+                android:paddingEnd="24dp"
+                android:paddingTop="16dp"
+                android:paddingBottom="16dp"
+                android:id="@+id/remote_input_send"
+                android:src="@drawable/ic_slice_send"
+                android:tint="#FFFFFF"
+                android:tintMode="src_in"
+                android:background="@drawable/slice_ripple_drawable" />
+
+        <ProgressBar
+                android:id="@+id/remote_input_progress"
+                android:layout_width="24dp"
+                android:layout_height="24dp"
+                android:layout_marginEnd="6dp"
+                android:layout_gravity="center"
+                android:visibility="invisible"
+                android:indeterminate="true"
+                style="?android:attr/progressBarStyleSmall" />
+
+    </FrameLayout>
+
+</android.app.slice.widget.RemoteInputView>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_secondary_text.xml b/android-sdk/platforms/android-34/data/res/layout/slice_secondary_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..80a15747f52876d418c521aea61d24a8d4849cab
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_secondary_text.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- LinearLayout -->
+<TextView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:textColor="?android:attr/textColorSecondary"
+        android:gravity="center"
+        android:layout_height="wrap_content"
+        android:padding="4dp"
+        android:layout_width="match_parent" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_small_template.xml b/android-sdk/platforms/android-34/data/res/layout/slice_small_template.xml
new file mode 100644
index 0000000000000000000000000000000000000000..cced42b48eefcd9e44df84ed035406f3c6deebb7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_small_template.xml
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:gravity="center_vertical"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd"
+    android:background="?android:attr/activatedBackgroundIndicator"
+    android:clipToPadding="false">
+
+    <LinearLayout
+        android:id="@android:id/icon_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginStart="-4dp"
+        android:gravity="start|center_vertical"
+        android:orientation="horizontal"
+        android:paddingEnd="12dp"
+        android:paddingTop="4dp"
+        android:paddingBottom="4dp"/>
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:gravity="center_vertical"
+        android:orientation="vertical">
+
+        <TextView android:id="@android:id/title"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:maxLines="2"
+            android:textAppearance="?android:attr/textAppearanceListItem" />
+
+        <TextView android:id="@android:id/summary"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignStart="@android:id/title"
+            android:textAppearance="?android:attr/textAppearanceListItemSecondary"
+            android:textColor="?android:attr/textColorSecondary"
+            android:maxLines="10" />
+
+    </LinearLayout>
+
+    <LinearLayout android:id="@android:id/widget_frame"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:gravity="end|center_vertical"
+        android:orientation="horizontal" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/slice_title.xml b/android-sdk/platforms/android-34/data/res/layout/slice_title.xml
new file mode 100644
index 0000000000000000000000000000000000000000..455d59f1bfd58fe6422be32687cb03ff3f237e6d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/slice_title.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- LinearLayout -->
+<TextView
+        xmlns:android="http://schemas.android.com/apk/res/android"
+        android:textAppearance="?android:attr/textAppearanceMedium"
+        android:textColor="?android:attr/textColorPrimary"
+        android:gravity="center"
+        android:layout_height="wrap_content"
+        android:padding="4dp"
+        android:layout_width="match_parent" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/sms_short_code_confirmation_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/sms_short_code_confirmation_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d82f560fc3d084976f542285af34b06721c8287e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/sms_short_code_confirmation_dialog.xml
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2012 The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/parentPanel"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_marginLeft="8dip"
+    android:layout_marginRight="8dip"
+    android:orientation="vertical">
+
+    <TextView android:id="@+id/sms_short_code_confirm_message"
+        style="?android:attr/textAppearanceMedium"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingLeft="20dip"
+        android:paddingRight="20dip"
+        android:paddingTop="16dip"
+        android:paddingBottom="16dip" />
+
+    <TableLayout android:id="@+id/sms_short_code_detail_layout"
+        android:shrinkColumns="1"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingLeft="16dip"
+        android:paddingRight="16dip">
+
+        <TableRow
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" >
+
+            <ImageView android:id="@+id/sms_short_code_coins_icon"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingLeft="8dip"
+                android:paddingRight="8dip"
+                android:src="@drawable/ic_coins_l" />
+            <TextView android:id="@+id/sms_short_code_detail_message"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content" />
+        </TableRow>
+
+        <TableRow
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" >
+            <RelativeLayout android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingTop="12dip"
+                android:paddingLeft="8dip" >
+            <CheckBox android:id="@+id/sms_short_code_remember_choice_checkbox"
+                android:paddingTop="11dip"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content" />
+            </RelativeLayout>
+            <TextView android:id="@+id/sms_short_code_remember_choice_text"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:paddingTop="18dip"
+                android:text="@string/sms_short_code_remember_choice" />
+        </TableRow>
+
+        <TableRow
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content" >
+
+            <Space android:layout_gravity="fill" />
+            <TextView android:id="@+id/sms_short_code_remember_undo_instruction"
+                android:paddingTop="10dip"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content" />
+        </TableRow>
+
+    </TableLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/splash_screen_view.xml b/android-sdk/platforms/android-34/data/res/layout/splash_screen_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..304affe068a494f1dd57406e2b4cdffc6d3f55ac
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/splash_screen_view.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+<android.window.SplashScreenView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_height="match_parent"
+    android:layout_width="match_parent"
+    android:padding="0dp"
+    android:orientation="vertical">
+
+    <ImageView android:id="@+id/splashscreen_icon_view"
+          android:layout_height="wrap_content"
+          android:layout_width="wrap_content"
+          android:layout_gravity="center"
+          android:padding="0dp"
+          android:background="@null"
+          android:contentDescription="@string/splash_screen_view_icon_description"/>
+
+    <View android:id="@+id/splashscreen_branding_view"
+          android:layout_height="wrap_content"
+          android:layout_width="wrap_content"
+          android:layout_gravity="center_horizontal|bottom"
+          android:layout_marginBottom="60dp"
+          android:padding="0dp"
+          android:background="@null"
+          android:forceHasOverlappingRendering="false"
+          android:contentDescription="@string/splash_screen_view_branding_description"/>
+
+</android.window.SplashScreenView>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/ssl_certificate.xml b/android-sdk/platforms/android-34/data/res/layout/ssl_certificate.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a69d2a37463b7c8719c1ef661d5839c5d1c6761a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/ssl_certificate.xml
@@ -0,0 +1,286 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<ScrollView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content" >
+
+    <LinearLayout
+        android:id="@+id/body"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:gravity="start"
+        android:orientation="vertical" >
+
+        <!-- Placeholder for the success message or one or more warnings -->
+        <LinearLayout
+            android:id="@+id/placeholder"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginTop="12dip"
+            android:orientation="vertical" />
+
+        <!-- Dialog-title line separator -->
+        <ImageView
+            android:id="@+id/title_separator"
+            android:src="@android:drawable/divider_horizontal_dark"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:scaleType="fitXY"
+            android:layout_weight="1"
+            android:gravity="fill_horizontal"
+            android:layout_marginEnd="20dip"
+            android:layout_marginStart="20dip"/>
+
+        <!-- Issued to: -->
+        <TextView
+            android:id="@+id/issued_to_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/issued_to"
+            android:textStyle="bold"
+            android:layout_marginTop="12dip"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Common name: -->
+        <TextView
+            android:id="@+id/to_common_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/common_name"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/to_common"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Organization: -->
+        <TextView
+            android:id="@+id/to_org_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/org_name"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/to_org"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Organizational unit: -->
+        <TextView
+            android:id="@+id/to_org_unit_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/org_unit"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/to_org_unit"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Serial number: -->
+        <TextView
+            android:id="@+id/serial_number_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/serial_number"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/serial_number"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Issued by: -->
+        <TextView
+            android:id="@+id/issued_to_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/issued_by"
+            android:textStyle="bold"
+            android:layout_marginTop="12dip"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Common name: -->
+        <TextView
+            android:id="@+id/by_common_header"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/common_name"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/by_common"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Organization: -->
+        <TextView
+            android:id="@+id/by_org_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/org_name"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/by_org"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Organizational unit: -->
+        <TextView
+            android:id="@+id/by_org_unit_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/org_unit"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/by_org_unit"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Validity Dates: -->
+        <TextView
+            android:id="@+id/validity_header"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/validity_period"
+            android:textStyle="bold"
+            android:layout_marginTop="12dip"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Issued On: -->
+        <TextView
+            android:id="@+id/issued_on_header"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/issued_on"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/issued_on"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Expires On: -->
+        <TextView
+            android:id="@+id/expires_on_header"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/expires_on"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/expires_on"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- Fingerprints: -->
+        <TextView
+            android:id="@+id/fingerprints"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:text="@string/fingerprints"
+            android:textStyle="bold"
+            android:layout_marginTop="12dip"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- SHA-256 fingerprint: -->
+        <TextView
+            android:id="@+id/sha256_fingerprint_header"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/sha256_fingerprint"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/sha256_fingerprint"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+        <!-- SHA-1 fingerprint: -->
+        <TextView
+            android:id="@+id/sha1_fingerprint_header"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:text="@string/sha1_fingerprint"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip" />
+
+        <TextView
+            android:id="@+id/sha1_fingerprint"
+            android:layout_height="wrap_content"
+            android:layout_width="match_parent"
+            android:layout_marginStart="20dip"
+            android:layout_marginEnd="20dip"
+            android:layout_marginBottom="7dip" />
+
+    </LinearLayout>
+
+</ScrollView>
diff --git a/android-sdk/platforms/android-34/data/res/layout/status_bar_latest_event_content.xml b/android-sdk/platforms/android-34/data/res/layout/status_bar_latest_event_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9444164d9be88aa421c7cd10cd67cc6ff07d505b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/status_bar_latest_event_content.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2012 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Nobody should be using this file directly. If you do, you will get a
+     purple background. Have fun with that. -->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/status_bar_latest_event_content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:background="#FFFF00FF"
+    >
+    <include layout="@layout/notification_template_material_base"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/subscription_item_layout.xml b/android-sdk/platforms/android-34/data/res/layout/subscription_item_layout.xml
new file mode 100644
index 0000000000000000000000000000000000000000..aa835f4abf6913537de426d3d58cf0b8b5636b3f
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/subscription_item_layout.xml
@@ -0,0 +1,69 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright (C) 2014 MediaTek Inc.
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeight"
+    android:gravity="center_vertical"
+    android:paddingStart="?android:attr/listPreferredItemPaddingStart"
+    android:paddingEnd="?android:attr/listPreferredItemPaddingEnd" >
+    <RelativeLayout
+        android:layout_width="48dip"
+        android:layout_height="32dip"
+        android:id="@+id/sub_color"
+        android:layout_marginEnd="6dip"
+        android:layout_centerVertical="true">
+    <TextView
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:id="@+id/sub_short_number"
+            android:layout_marginBottom="2dip"
+            android:layout_marginEnd="4dip"
+            android:layout_alignParentEnd="true"
+            android:layout_alignParentBottom="true"
+            android:textSize="12sp"
+            android:singleLine="true"
+            android:textColor="@android:color/white"
+            android:includeFontPadding="false"/>
+    </RelativeLayout>
+    <RelativeLayout
+        android:layout_width="0dip"
+        android:layout_height="wrap_content"
+        android:layout_weight="1"
+        android:layout_centerVertical="true">
+        <TextView
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:id="@+id/sub_name"
+            android:singleLine="true"
+            android:ellipsize="none"
+            android:textAppearance="?android:attr/textAppearanceMedium"/>
+        <TextView
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:id="@+id/sub_number"
+            android:layout_below="@+id/sub_name"
+            android:layout_alignStart="@+id/sub_name"
+            android:singleLine="true"
+            android:ellipsize="none"
+            android:textAppearance="?android:attr/textAppearanceSmall"
+            android:textColor="?android:attr/textColorSecondary"/>
+    </RelativeLayout>
+</LinearLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/system_user_home.xml b/android-sdk/platforms/android-34/data/res/layout/system_user_home.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8afa42338e365b9277638b1b501bbedcb703a9c7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/system_user_home.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+<FrameLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:background="#80000000"
+    android:forceHasOverlappingRendering="false">
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        android:layout_gravity="center"
+        android:layout_marginStart="16dp"
+        android:layout_marginEnd="16dp">
+        <TextView
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:textSize="20sp"
+            android:textColor="?android:attr/textColorPrimary"
+            android:text="Framework Fallback Home"/>
+        <ProgressBar
+            style="@android:style/Widget.Material.ProgressBar.Horizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="12.75dp"
+            android:colorControlActivated="?android:attr/textColorPrimary"
+            android:indeterminate="true"/>
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/tab_content.xml b/android-sdk/platforms/android-34/data/res/layout/tab_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3fa4494a837a103839689b59089a5088c54f1903
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tab_content.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/layout/tab_content.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+
+<TabHost
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/tabhost"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent">
+
+    <LinearLayout
+        android:orientation="vertical"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent">
+
+        <TabWidget
+            android:id="@android:id/tabs"
+            android:orientation="horizontal"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:layout_weight="0"/>
+
+        <FrameLayout
+            android:id="@android:id/tabcontent"
+            android:layout_width="match_parent"
+            android:layout_height="0dip"
+            android:layout_weight="1"/>
+
+    </LinearLayout>
+</TabHost>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/tab_indicator.xml b/android-sdk/platforms/android-34/data/res/layout/tab_indicator.xml
new file mode 100644
index 0000000000000000000000000000000000000000..55ab1d83ebad0c05c4e5d92f46fce4254b03a615
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tab_indicator.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="0dip"
+    android:layout_height="64dip"
+    android:layout_weight="1"
+    android:layout_marginStart="-3dip"
+    android:layout_marginEnd="-3dip"
+    android:background="@android:drawable/tab_indicator">
+
+    <ImageView android:id="@+id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_centerHorizontal="true"
+    />
+
+    <TextView android:id="@+id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignParentBottom="true"
+        android:layout_centerHorizontal="true"
+        style="?android:attr/tabWidgetStyle"
+    />
+
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/tab_indicator_holo.xml b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_holo.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4410b206b461d4d2082d7900275ab4c220c71c2d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_holo.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_height="?android:attr/actionBarSize"
+    android:orientation="horizontal"
+    style="@android:style/Widget.Holo.Tab">
+
+    <ImageView
+        android:id="@android:id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:visibility="gone" />
+
+    <TextView
+        android:id="@android:id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        style="@android:style/Widget.Holo.TabText" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/tab_indicator_material.xml b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7dba219ef94289875d91cc7c35d6748377652d15
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_material.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_height="?android:attr/actionBarSize"
+    android:orientation="horizontal"
+    style="@android:style/Widget.Material.Tab">
+
+    <ImageView
+        android:id="@android:id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:visibility="gone" />
+
+    <TextView
+        android:id="@android:id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        style="@android:style/Widget.Material.TabText" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/tab_indicator_resolver.xml b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_resolver.xml
new file mode 100644
index 0000000000000000000000000000000000000000..2038da656ee3755940bb577b83e2e988f419d746
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tab_indicator_resolver.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2020 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_height="?android:attr/actionBarSize"
+    android:orientation="horizontal"
+    style="@android:style/Widget.Material.Resolver.Tab">
+
+    <ImageView
+        android:id="@android:id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:visibility="gone" />
+
+    <TextView
+        android:id="@android:id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:textAllCaps="false"
+        style="@android:style/Widget.Material.TabText" />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/test_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/test_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ede32e88c664234e9ee28f597294a5cedce7c69b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/test_list_item.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:textAppearance="?android:attr/textAppearanceSmall"
+    android:paddingTop="2dip"
+    android:paddingBottom="3dip"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_drag_thumbnail.xml b/android-sdk/platforms/android-34/data/res/layout/text_drag_thumbnail.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b1a58cdbec6129bbafa29a4e21bc9b7aa1135cf7
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_drag_thumbnail.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2010, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<TextView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:textAppearance="@android:style/TextAppearance.Large"
+    android:gravity="center"
+    />
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_action_popup_text.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_action_popup_text.xml
new file mode 100644
index 0000000000000000000000000000000000000000..16bf30e7902fd8ee6921fe62dd3f7f5771d20660
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_action_popup_text.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:paddingStart="16dip"
+    android:paddingEnd="16dip"
+    android:paddingTop="8dip"
+    android:paddingBottom="8dip"
+    android:gravity="center"
+    android:textAppearance="?android:attr/textAppearanceSmallInverse"
+    android:textColor="@android:color/black"
+    android:textAllCaps="true"
+    android:textStyle="bold"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_no_paste_window.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_no_paste_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..10a752cd75c6accb1bdd84b7a4419453439f2961
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_no_paste_window.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+
+    <TextView android:id="@+id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip"
+        android:paddingTop="8dip"
+        android:paddingBottom="8dip"
+        android:drawablePadding="8dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceMediumInverse"
+        android:textColor="@android:color/dim_foreground_dark_inverse_disabled"
+        android:background="@android:drawable/text_edit_paste_window"
+        android:layout_marginBottom="12dip"
+    />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_paste_window.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_paste_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3b8dbf2dfb3f21c5c760de49c0c6387a480d274d
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_paste_window.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+
+    <TextView android:id="@+id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip"
+        android:paddingTop="8dip"
+        android:paddingBottom="12dip"
+        android:drawablePadding="8dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceMediumInverse"
+        android:textColor="@android:color/black"
+        android:background="@android:drawable/text_edit_paste_window"
+        android:text="@android:string/paste"
+        android:layout_marginBottom="12dip"
+    />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_side_no_paste_window.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_side_no_paste_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..aa695cd92a337da098f7ff22547baf5f31a7d254
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_side_no_paste_window.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+
+    <TextView android:id="@+id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip"
+        android:paddingTop="8dip"
+        android:paddingBottom="8dip"
+        android:drawablePadding="8dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceMediumInverse"
+        android:textColor="@android:color/dim_foreground_dark_inverse_disabled"
+        android:background="@android:drawable/text_edit_side_paste_window"
+        android:layout_marginBottom="12dip"
+    />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_side_paste_window.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_side_paste_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..c947a1982348c6312c94a4db1f7c43902a37a7e5
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_side_paste_window.xml
@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+
+    <TextView android:id="@+id/title"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="16dip"
+        android:paddingEnd="16dip"
+        android:paddingTop="8dip"
+        android:paddingBottom="8dip"
+        android:drawablePadding="8dip"
+        android:gravity="center"
+        android:textAppearance="?android:attr/textAppearanceMediumInverse"
+        android:textColor="@android:color/black"
+        android:background="@android:drawable/text_edit_side_paste_window"
+        android:text="@android:string/paste"
+        android:layout_marginBottom="12dip"
+    />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4a74ea2726faaa3f018abdb688598be12043898b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container.xml
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+    <LinearLayout
+        android:id="@+id/suggestionWindowContainer"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="vertical"
+        android:elevation="@android:dimen/text_edit_floating_toolbar_elevation"
+        android:layout_margin="@android:dimen/text_edit_floating_toolbar_margin"
+        android:background="@drawable/text_edit_suggestions_window"
+        android:dropDownSelector="@drawable/list_selector_background"
+        android:divider="@null">
+        <ListView
+            android:id="@+id/suggestionContainer"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:divider="?android:attr/dividerHorizontal">
+            <!-- Suggestions will be added here. -->
+        </ListView>
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="vertical"
+            android:divider="?android:attr/dividerHorizontal"
+            android:showDividers="middle">
+            <TextView
+                style="@android:style/Widget.Holo.SuggestionButton"
+                android:id="@+id/addToDictionaryButton"
+                android:text="@string/addToDictionary" />
+            <TextView
+                style="@android:style/Widget.Holo.SuggestionButton"
+                android:id="@+id/deleteButton"
+                android:text="@string/deleteText" />
+        </LinearLayout>
+    </LinearLayout>
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container_material.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..34e7bc8af8da5190de74bbcb4ff47d14006b4d85
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_container_material.xml
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Background of the popup window is the same as the one of the floating toolbar.
+     Use floating toolbar background style. -->
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+    <LinearLayout
+        android:id="@+id/suggestionWindowContainer"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:background="?android:attr/floatingToolbarPopupBackgroundDrawable"
+        android:elevation="@android:dimen/text_edit_floating_toolbar_elevation"
+        android:layout_margin="@android:dimen/text_edit_floating_toolbar_margin"
+        android:orientation="vertical"
+        android:divider="?android:attr/listDivider"
+        android:showDividers="middle">
+        <ListView
+            android:id="@+id/suggestionContainer"
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:paddingTop="4dp"
+            android:paddingBottom="0dp"
+            android:divider="@null" />
+        <LinearLayout
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:orientation="vertical">
+            <TextView
+                style="@android:style/Widget.Material.SuggestionButton"
+                android:id="@+id/addToDictionaryButton"
+                android:text="@string/addToDictionary" />
+            <TextView
+                style="@android:style/Widget.Material.SuggestionButton"
+                android:id="@+id/deleteButton"
+                android:text="@string/deleteText" />
+        </LinearLayout>
+    </LinearLayout>
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..9dcbf2e1ff39b4752550e4d1849d869e7d56f058
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+        style="@android:style/Widget.Holo.SuggestionItem" />
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item_material.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0443a976dc11f6821aceadc9c4e5880e4933141b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestion_item_material.xml
@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    style="@android:style/Widget.Material.SuggestionItem" />
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestions_window.xml b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestions_window.xml
new file mode 100644
index 0000000000000000000000000000000000000000..824025e606f4b6f42fec69bcb8810f8b8757e71b
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/text_edit_suggestions_window.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="vertical"
+    android:background="@android:drawable/text_edit_suggestions_window">
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/textview_hint.xml b/android-sdk/platforms/android-34/data/res/layout/textview_hint.xml
new file mode 100644
index 0000000000000000000000000000000000000000..b94dfc9cbfae907df1b36f65f1caeea013428a1e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/textview_hint.xml
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2008 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:textAppearance="?android:attr/textAppearanceSmall"
+    android:textColor="?android:attr/textColorPrimaryInverse"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/thumbnail_background_view.xml b/android-sdk/platforms/android-34/data/res/layout/thumbnail_background_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..423af837bed66efd2239880415b10e1b9be5f575
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/thumbnail_background_view.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2023 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:background="@drawable/accessibility_magnification_thumbnail_background_bg"
+    android:foreground="@drawable/accessibility_magnification_thumbnail_background_fg"
+    android:padding="@dimen/accessibility_magnification_thumbnail_container_stroke_width"
+>
+    <View
+        android:padding="@dimen/accessibility_magnification_thumbnail_container_stroke_width"
+        android:id="@+id/accessibility_magnification_thumbnail_view"
+        android:layout_width="match_parent"
+        android:layout_height="match_parent"
+        android:background="@drawable/accessibility_magnification_thumbnail_bg">
+    </View>
+</FrameLayout>
\ No newline at end of file
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ada18d16adb8b2ce386a265bd986cb59a47fada9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_dialog.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<TimePicker xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/timePicker"
+    android:layout_gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:dialogMode="true" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_header_material.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_header_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a1e10ff8c7d11d2089daecda3060130fa0c3d956
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_header_material.xml
@@ -0,0 +1,113 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2013 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License
+  -->
+
+<!-- This layout is duplicated in land/time_picker_material.xml, so any
+     changes made here need to be manually copied over. -->
+<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
+                android:id="@+id/time_header"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:paddingStart="16dp"
+                android:paddingEnd="16dp">
+
+    <!-- The hour should always be to the left of the separator,
+         regardless of the current locale's layout direction. -->
+    <com.android.internal.widget.NumericTextView
+        android:id="@+id/hours"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_toLeftOf="@+id/separator"
+        android:layout_alignBaseline="@+id/separator"
+        android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+        android:background="@drawable/time_picker_editable_background"
+        android:singleLine="true"
+        android:ellipsize="none"
+        android:gravity="right"
+        android:focusable="true"
+        android:pointerIcon="hand"
+        android:nextFocusForward="@+id/minutes" />
+
+    <TextView
+        android:id="@+id/separator"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginLeft="@dimen/timepicker_separator_padding"
+        android:layout_marginRight="@dimen/timepicker_separator_padding"
+        android:layout_centerInParent="true"
+        android:paddingBottom="4dp"
+        android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+        android:importantForAccessibility="no" />
+
+    <!-- The minutes should always be to the right of the separator,
+         regardless of the current locale's layout direction. -->
+    <com.android.internal.widget.NumericTextView
+        android:id="@+id/minutes"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_toRightOf="@+id/separator"
+        android:layout_alignBaseline="@+id/separator"
+        android:textAppearance="@style/TextAppearance.Material.TimePicker.TimeLabel"
+        android:background="@drawable/time_picker_editable_background"
+        android:singleLine="true"
+        android:ellipsize="none"
+        android:gravity="left"
+        android:focusable="true"
+        android:pointerIcon="hand"
+        android:nextFocusForward="@+id/am_label" />
+
+    <!-- The layout alignment of this view will switch between toRightOf
+         @id/minutes and toLeftOf @id/hours depending on the locale. -->
+    <RadioGroup
+        android:id="@+id/ampm_layout"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_toRightOf="@+id/minutes"
+        android:layout_alignBaseline="@+id/minutes"
+        android:layout_marginStart="8dp"
+        android:layout_marginEnd="0dp"
+        android:orientation="vertical"
+        android:baselineAlignedChildIndex="1">
+        <RadioButton
+            android:id="@+id/am_label"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingTop="8dp"
+            android:paddingBottom="8dp"
+            android:layout_marginBottom="-8dp"
+            android:textAppearance="@style/TextAppearance.Material.TimePicker.AmPmLabel"
+            android:lines="1"
+            android:ellipsize="none"
+            android:focusable="true"
+            android:background="?android:attr/selectableItemBackground"
+            android:includeFontPadding="false"
+            android:nextFocusForward="@+id/pm_label"
+            android:button="@null" />
+        <RadioButton
+            android:id="@+id/pm_label"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:paddingTop="8dp"
+            android:paddingBottom="8dp"
+            android:textAppearance="@style/TextAppearance.Material.TimePicker.AmPmLabel"
+            android:lines="1"
+            android:ellipsize="none"
+            android:focusable="true"
+            android:background="?android:attr/selectableItemBackground"
+            android:includeFontPadding="false"
+            android:button="@null" />
+    </RadioGroup>
+</RelativeLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4fa94f328a5cc25c8808c5e2feaaeeb30e2ab9b1
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy.xml
@@ -0,0 +1,68 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2007, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- Layout of time picker-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/timePickerLayout"
+    android:orientation="horizontal"
+    android:layout_gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content">
+
+    <LinearLayout android:orientation="horizontal"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layoutDirection="ltr">
+
+        <!-- hour -->
+        <NumberPicker
+            android:id="@+id/hour"
+            android:layout_width="70dip"
+            android:layout_height="wrap_content"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- minute -->
+        <NumberPicker
+            android:id="@+id/minute"
+            android:layout_width="70dip"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="5dip"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+    </LinearLayout>
+
+    <!-- AM / PM -->
+    <Button
+        android:id="@+id/amPm"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="43dip"
+        android:layout_marginStart="5dip"
+        android:paddingStart="20dip"
+        android:paddingEnd="20dip"
+        style="?android:attr/textAppearanceLargeInverse"
+        android:textColor="@android:color/primary_text_light_nodisable"
+        />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy_material.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..ee56266390f1304b49318ed4bf17fa73a6305291
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_legacy_material.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- Layout of time picker -->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@+id/timePickerLayout"
+    android:orientation="horizontal"
+    android:layout_gravity="center_horizontal"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:paddingStart="8dip"
+    android:paddingEnd="8dip">
+
+    <LinearLayout android:orientation="horizontal"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:paddingStart="8dip"
+        android:paddingEnd="8dip"
+        android:layoutDirection="ltr">
+
+        <!-- hour -->
+        <NumberPicker
+            android:id="@+id/hour"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/picker_top_margin"
+            android:layout_marginBottom="@dimen/picker_bottom_margin"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+        <!-- divider -->
+        <TextView
+            android:id="@+id/divider"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="6dip"
+            android:layout_marginEnd="6dip"
+            android:layout_gravity="center_vertical"
+            android:importantForAccessibility="no"
+            />
+
+        <!-- minute -->
+        <NumberPicker
+            android:id="@+id/minute"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginTop="@dimen/picker_top_margin"
+            android:layout_marginBottom="@dimen/picker_bottom_margin"
+            android:focusable="true"
+            android:focusableInTouchMode="true"
+            />
+
+    </LinearLayout>
+
+    <!-- AM / PM -->
+    <NumberPicker
+        android:id="@+id/amPm"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="@dimen/picker_top_margin"
+        android:layout_marginBottom="@dimen/picker_bottom_margin"
+        android:layout_marginStart="8dip"
+        android:layout_marginEnd="8dip"
+        android:focusable="true"
+        android:focusableInTouchMode="true"
+        />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_material.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..75973798219ef1024121e8a734df4f152bbfd966
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_material.xml
@@ -0,0 +1,86 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2013, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+    <include
+        layout="@layout/time_picker_header_material"
+        android:layout_width="match_parent"
+        android:layout_height="@dimen/timepicker_header_height"
+        android:layout_gravity="center" />
+    <android.widget.RadialTimePickerView
+        android:id="@+id/radial_picker"
+        android:layout_width="wrap_content"
+        android:layout_height="@dimen/timepicker_radial_picker_dimen"
+        android:layout_gravity="center"
+        android:layout_marginTop="@dimen/timepicker_radial_picker_top_margin"
+        android:layout_marginStart="@dimen/timepicker_radial_picker_horizontal_margin"
+        android:layout_marginEnd="@dimen/timepicker_radial_picker_horizontal_margin" />
+    <TextView
+        android:visibility="gone"
+        android:id="@+id/input_header"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingStart="@dimen/dialog_padding_material"
+        android:paddingEnd="@dimen/dialog_padding_material"
+        android:paddingTop="20dp"
+        android:paddingBottom="20dp"
+        android:includeFontPadding="false"
+        android:fontFamily="sans-serif-medium"
+        android:textSize="34sp"
+        android:textColor="@color/white"
+        android:text="@string/time_picker_header_text"/>
+    <android.widget.TextInputTimePickerView
+        android:id="@+id/input_mode"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingStart="?attr/dialogPreferredPadding"
+        android:paddingEnd="?attr/dialogPreferredPadding"
+        android:visibility="gone" />
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content">
+        <ImageButton
+            android:id="@+id/toggle_mode"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_gravity="center_vertical"
+            android:layout_marginStart="12dp"
+            android:layout_marginEnd="12dp"
+            android:padding="12dp"
+            android:background="?attr/selectableItemBackgroundBorderless"
+            android:tint="?attr/colorControlNormal"
+            android:src="@drawable/btn_keyboard_key_material"
+            android:contentDescription="@string/time_picker_text_input_mode_description" />
+        <Space
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_weight="1" />
+        <ViewStub
+            android:id="@id/buttonPanel"
+            android:layout="@layout/alert_dialog_button_bar_material"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layoutDirection="locale" />
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/time_picker_text_input_material.xml b/android-sdk/platforms/android-34/data/res/layout/time_picker_text_input_material.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4988842cb99c5ab6f913fc50fcec00cc06777a46
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/time_picker_text_input_material.xml
@@ -0,0 +1,94 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2017 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+
+    <TextView
+        android:id="@+id/top_label"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_marginTop="26dp"
+        android:layout_marginBottom="8dp"
+        android:text="@string/time_picker_prompt_label"
+        android:textAppearance="@style/TextAppearance.Material.TimePicker.PromptLabel" />
+
+    <RelativeLayout
+        android:id="@+id/input_block"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_below="@id/top_label"
+        android:layoutDirection="ltr">
+        <EditText
+            android:id="@+id/input_hour"
+            android:layout_width="50dp"
+            android:layout_height="wrap_content"
+            android:inputType="number"
+            android:textAppearance="@style/TextAppearance.Material.TimePicker.InputField"
+            android:imeOptions="actionNext"/>
+        <TextView
+            android:id="@+id/label_hour"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/input_hour"
+            android:layout_alignStart="@id/input_hour"
+            android:labelFor="@+id/input_hour"
+            android:text="@string/time_picker_hour_label"/>
+
+        <TextView
+            android:id="@+id/input_separator"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_alignEnd="@id/input_hour"
+            android:layout_alignBaseline="@id/input_hour"
+            android:textAppearance="@style/TextAppearance.Material.TimePicker.InputField" />
+
+        <EditText
+            android:id="@+id/input_minute"
+            android:layout_width="50dp"
+            android:layout_height="wrap_content"
+            android:layout_alignBaseline="@id/input_hour"
+            android:layout_toEndOf="@id/input_separator"
+            android:inputType="number"
+            android:textAppearance="@style/TextAppearance.Material.TimePicker.InputField" />
+        <TextView
+            android:id="@+id/label_minute"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/input_minute"
+            android:layout_alignStart="@id/input_minute"
+            android:labelFor="@+id/input_minute"
+            android:text="@string/time_picker_minute_label"/>
+
+        <TextView
+            android:visibility="invisible"
+            android:id="@+id/label_error"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_below="@id/input_hour"
+            android:layout_alignStart="@id/input_hour"
+            android:accessibilityLiveRegion="assertive"
+            android:textColor="?attr/colorError"
+            android:text="@string/time_picker_input_error" />
+    </RelativeLayout>
+    <Spinner
+        android:id="@+id/am_pm_spinner"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_alignBaseline="@id/input_block"
+        android:layout_alignParentEnd="true"/>
+
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/tooltip.xml b/android-sdk/platforms/android-34/data/res/layout/tooltip.xml
new file mode 100644
index 0000000000000000000000000000000000000000..376c5eb125f4d7ed6cb2de4b85c3c9911d416217
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/tooltip.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2016, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="vertical">
+
+    <TextView
+        android:id="@android:id/message"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_margin="@dimen/tooltip_margin"
+        android:paddingStart="@dimen/tooltip_horizontal_padding"
+        android:paddingEnd="@dimen/tooltip_horizontal_padding"
+        android:paddingTop="@dimen/tooltip_vertical_padding"
+        android:paddingBottom="@dimen/tooltip_vertical_padding"
+        android:maxWidth="256dp"
+        android:background="?android:attr/tooltipFrameBackground"
+        android:textAppearance="@style/TextAppearance.Tooltip"
+        android:textColor="?android:attr/tooltipForegroundColor"
+        android:maxLines="3"
+        android:ellipsize="end"
+    />
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/transient_notification.xml b/android-sdk/platforms/android-34/data/res/layout/transient_notification.xml
new file mode 100644
index 0000000000000000000000000000000000000000..8bedb897dc19655ca0aefbcafb5afccd60f59a22
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/transient_notification.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/transient_notification.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:maxWidth="@dimen/toast_width"
+    android:background="?android:attr/colorBackground"
+    android:elevation="@dimen/toast_elevation"
+    android:layout_marginEnd="16dp"
+    android:layout_marginStart="16dp"
+    android:paddingStart="16dp"
+    android:paddingEnd="16dp">
+
+    <TextView
+        android:id="@android:id/message"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:ellipsize="end"
+        android:maxLines="2"
+        android:paddingTop="12dp"
+        android:paddingBottom="12dp"
+        android:textAppearance="@style/TextAppearance.Toast"/>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/transient_notification_with_icon.xml b/android-sdk/platforms/android-34/data/res/layout/transient_notification_with_icon.xml
new file mode 100644
index 0000000000000000000000000000000000000000..0dfb3adc8364afad2ead682c32d86e8d2f19be22
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/transient_notification_with_icon.xml
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (C) 2022 The Android Open Source Project
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~      http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<LinearLayout
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="wrap_content"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    android:gravity="center_vertical"
+    android:maxWidth="@dimen/toast_width"
+    android:background="?android:attr/colorBackground"
+    android:elevation="@dimen/toast_elevation"
+    android:layout_marginEnd="16dp"
+    android:layout_marginStart="16dp"
+    android:paddingStart="16dp"
+    android:paddingEnd="16dp">
+
+    <ImageView
+        android:id="@android:id/icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content" />
+
+    <TextView
+        android:id="@android:id/message"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:ellipsize="end"
+        android:maxLines="2"
+        android:paddingTop="12dp"
+        android:paddingBottom="12dp"
+        android:textAppearance="@style/TextAppearance.Toast"/>
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/twelve_key_entry.xml b/android-sdk/platforms/android-34/data/res/layout/twelve_key_entry.xml
new file mode 100644
index 0000000000000000000000000000000000000000..7b41b50c68b43e9b02ffeb2924b39741f44e4a9e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/twelve_key_entry.xml
@@ -0,0 +1,181 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- This is not a standalone element it can be included into apps that need 12-key input -->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical">
+
+    <LinearLayout
+        android:layout_width="fill_parent"
+        android:layout_height="64dip"
+        android:layout_marginStart="2dip"
+        android:layout_marginEnd="2dip"
+        android:orientation="horizontal">
+
+        <Button android:id="@+id/one"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/two"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/three"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="fill_parent"
+        android:layout_height="64dip"
+        android:layout_marginStart="2dip"
+        android:layout_marginEnd="2dip"
+        android:orientation="horizontal">
+
+        <Button android:id="@+id/four"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/five"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/six"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="fill_parent"
+        android:layout_height="64dip"
+        android:layout_marginStart="2dip"
+        android:layout_marginEnd="2dip"
+        android:orientation="horizontal">
+
+        <Button android:id="@+id/seven"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/eight"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/nine"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+    </LinearLayout>
+
+    <LinearLayout
+        android:layout_width="fill_parent"
+        android:layout_height="64dip"
+        android:layout_marginStart="2dip"
+        android:layout_marginEnd="2dip"
+        android:orientation="horizontal">
+
+        <Button android:id="@+id/cancel"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:textStyle="bold"
+            android:text="@android:string/cancel"
+        />
+
+        <Button android:id="@+id/zero"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceLarge"
+            android:textStyle="bold"
+        />
+
+        <Button android:id="@+id/ok"
+            android:layout_width="0sp"
+            android:layout_height="fill_parent"
+            android:layout_weight="1"
+            android:layout_marginStart="2dip"
+            android:layout_marginEnd="2dip"
+            android:textAppearance="?android:attr/textAppearanceMedium"
+            android:textStyle="bold"
+            android:text="@android:string/ok"
+        />
+
+    </LinearLayout>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/two_line_list_item.xml b/android-sdk/platforms/android-34/data/res/layout/two_line_list_item.xml
new file mode 100644
index 0000000000000000000000000000000000000000..24ba47a100c4f4b9328fe7d221f63f5eae5199e9
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/two_line_list_item.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/assets/res/any/layout/two_line_list_item.xml
+**
+** Copyright 2006, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="vertical">
+
+    <TextView android:id="@android:id/text1"
+        android:textSize="16sp"
+        android:textStyle="bold"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"/>
+
+    <TextView android:id="@android:id/text2"
+        android:textSize="16sp"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"/>
+
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/typing_filter.xml b/android-sdk/platforms/android-34/data/res/layout/typing_filter.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d8d0a400b4dd0218d2f28fa01568ed965f569544
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/typing_filter.xml
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2006 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+  
+          http://www.apache.org/licenses/LICENSE-2.0
+  
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<EditText xmlns:android="http://schemas.android.com/apk/res/android"
+    android:textSize="36dp"
+    android:textColor="#99FFFFFF"
+    android:background="#BB000000"
+    android:minWidth="240dip"
+    android:maxWidth="240dip"
+    android:padding="10dip"
+    android:gravity="center_horizontal"
+    android:focusable="false"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/unsupported_compile_sdk_dialog_content.xml b/android-sdk/platforms/android-34/data/res/layout/unsupported_compile_sdk_dialog_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..89e58aae6c3431fb7d5fe39a958c73342a644a47
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/unsupported_compile_sdk_dialog_content.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ * Copyright (C) 2017 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:paddingTop="?attr/dialogPreferredPadding"
+              android:paddingLeft="?attr/dialogPreferredPadding"
+              android:paddingRight="?attr/dialogPreferredPadding">
+
+    <CheckBox
+        android:id="@+id/ask_checkbox"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start"
+        android:text="@string/unsupported_compile_sdk_show" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/unsupported_display_size_dialog_content.xml b/android-sdk/platforms/android-34/data/res/layout/unsupported_display_size_dialog_content.xml
new file mode 100644
index 0000000000000000000000000000000000000000..5e5cf00b27ac9ddc40516634f1ed3ee4d3e515e4
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/unsupported_display_size_dialog_content.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+              android:layout_width="match_parent"
+              android:layout_height="wrap_content"
+              android:paddingTop="?attr/dialogPreferredPadding"
+              android:paddingLeft="?attr/dialogPreferredPadding"
+              android:paddingRight="?attr/dialogPreferredPadding">
+
+    <CheckBox
+        android:id="@+id/ask_checkbox"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="start"
+        android:text="@string/unsupported_display_size_show" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/user_switching_dialog.xml b/android-sdk/platforms/android-34/data/res/layout/user_switching_dialog.xml
new file mode 100644
index 0000000000000000000000000000000000000000..496179aefc914c167255504f0bbb95ed368008eb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/user_switching_dialog.xml
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2014 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+             android:id="@+id/content"
+             android:background="?attr/colorBackground"
+             android:layout_width="match_parent"
+             android:layout_height="match_parent">
+
+    <LinearLayout
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center"
+        android:gravity="center"
+        android:orientation="vertical"
+        android:paddingBottom="77dp">
+
+        <RelativeLayout
+            android:layout_width="242dp"
+            android:layout_height="242dp"
+            android:layout_gravity="center">
+
+            <ImageView
+                android:id="@+id/icon"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:layout_margin="26dp" />
+
+            <ImageView
+                android:id="@+id/progress_circular"
+                android:layout_width="match_parent"
+                android:layout_height="match_parent"
+                android:layout_margin="6dp"
+                android:src="@drawable/loading_spinner" />
+
+        </RelativeLayout>
+
+        <TextView xmlns:android="http://schemas.android.com/apk/res/android"
+                  android:id="@+id/message"
+                  style="?attr/textAppearanceListItem"
+                  android:layout_width="wrap_content"
+                  android:layout_height="wrap_content"
+                  android:textSize="20sp"
+                  android:textAlignment="center"
+                  android:drawableTint="?attr/textColorPrimary" />
+
+    </LinearLayout>
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/voice_interaction_session.xml b/android-sdk/platforms/android-34/data/res/layout/voice_interaction_session.xml
new file mode 100644
index 0000000000000000000000000000000000000000..48b6579a7c653e2d5f22c0e906dab91cbbcea7a8
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/voice_interaction_session.xml
@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/* //device/apps/common/res/layout/alert_dialog.xml
+**
+** Copyright 2014, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/content"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content">
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/web_runtime.xml b/android-sdk/platforms/android-34/data/res/layout/web_runtime.xml
new file mode 100644
index 0000000000000000000000000000000000000000..4ec09644595687ef21c30f68cb5b6f8fa2f3dc8e
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/web_runtime.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:orientation="vertical"
+    android:layout_width="fill_parent"
+    android:layout_height="fill_parent"
+    >
+    <WebView
+        android:id="@+id/webview"
+        android:layout_width="fill_parent"
+        android:layout_height="fill_parent"
+    />
+
+    <ImageView
+        android:id="@+id/splashscreen"
+        android:layout_width="fill_parent"
+        android:layout_height="fill_parent"
+        android:scaleType="fitStart"
+    />
+
+</FrameLayout>
+
diff --git a/android-sdk/platforms/android-34/data/res/layout/web_text_view_dropdown.xml b/android-sdk/platforms/android-34/data/res/layout/web_text_view_dropdown.xml
new file mode 100644
index 0000000000000000000000000000000000000000..1a6e9ebbd54223ae2d3725051217c393517f40fe
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/web_text_view_dropdown.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright 2010, The Android Open Source Project
+
+Licensed under the Apache License, Version 2.0 (the "License"); 
+you may not use this file except in compliance with the License. 
+You may obtain a copy of the License at 
+
+http://www.apache.org/licenses/LICENSE-2.0 
+
+Unless required by applicable law or agreed to in writing, software 
+distributed under the License is distributed on an "AS IS" BASIS, 
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+See the License for the specific language governing permissions and 
+limitations under the License.
+
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android" 
+    android:id="@android:id/text1"
+    style="?android:attr/dropDownItemStyle"
+    android:textAppearance="?android:attr/textAppearanceSearchResultTitle"
+    android:textColor="#ff000000"
+    android:background="#ffffffff"
+    android:singleLine="true"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:minHeight="?android:attr/listPreferredItemHeightSmall"
+    android:paddingTop="3dip"
+    android:paddingBottom="3dip" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/webview_find.xml b/android-sdk/platforms/android-34/data/res/layout/webview_find.xml
new file mode 100644
index 0000000000000000000000000000000000000000..da16043f781576a0e4e8ed04ed8cc24cf7fe4080
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/webview_find.xml
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2007 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:orientation="horizontal"
+    >
+    <EditText android:id="@+id/edit"
+        android:layout_width="0dip"
+        android:layout_weight="1"
+        android:layout_height="wrap_content"
+        android:scrollHorizontally="true"
+        android:inputType="text"
+        android:hint="@string/find_on_page"
+        android:imeOptions="actionDone|flagNoExtractUi|flagNoFullscreen"
+        android:layout_marginEnd="10dip"
+        />
+    <TextView android:id="@+id/matches"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="center_vertical"
+        android:textAppearance="?android:attr/textAppearanceSmall"
+        android:textColor="?android:attr/textColorPrimary"
+        />
+</LinearLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/webview_select_singlechoice.xml b/android-sdk/platforms/android-34/data/res/layout/webview_select_singlechoice.xml
new file mode 100644
index 0000000000000000000000000000000000000000..d3c3c15dbcb657714b324f7bd5a3726aeba858fb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/webview_select_singlechoice.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2011 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+    android:id="@android:id/text1"
+    android:layout_width="match_parent"
+    android:layout_height="?android:attr/dropdownListPreferredItemHeight"
+    android:ellipsize="marquee"
+    style="?android:attr/spinnerDropDownItemStyle"
+    android:background="?android:attr/activatedBackgroundIndicator"
+/>
diff --git a/android-sdk/platforms/android-34/data/res/layout/work_widget_mask_view.xml b/android-sdk/platforms/android-34/data/res/layout/work_widget_mask_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..21f1bf413fa9032a3671b55e910d457dd8d86eca
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/work_widget_mask_view.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2015 The Android Open Source Project
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+         http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    android:theme="@android:style/Theme.DeviceDefault.DayNight"
+    android:id="@android:id/background"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:background="@drawable/work_widget_mask_view_background"
+    android:importantForAccessibility="noHideDescendants"
+    android:clickable="true"
+    android:clipToOutline="true">
+
+    <com.android.internal.widget.DisableImageView
+        android:id="@+id/work_widget_app_icon"
+        android:layout_width="48dp"
+        android:layout_height="48dp"
+        android:layout_gravity="center"
+        android:clickable="false" />
+
+    <ImageView android:id="@+id/work_widget_badge_icon"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="bottom|right"
+        android:layout_marginBottom="12dp"
+        android:layout_marginRight="12dp"
+        android:src="@drawable/ic_corp_badge_off"
+        android:clickable="false" />
+</FrameLayout>
diff --git a/android-sdk/platforms/android-34/data/res/layout/year_label_text_view.xml b/android-sdk/platforms/android-34/data/res/layout/year_label_text_view.xml
new file mode 100644
index 0000000000000000000000000000000000000000..3ea719df83ce2197391f2588d9e3b2c93be7cd74
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/year_label_text_view.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2013 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<TextView xmlns:android="http://schemas.android.com/apk/res/android"
+         android:id="@id/text1"
+         android:layout_width="match_parent"
+         android:layout_height="wrap_content"
+         android:minHeight="?attr/listPreferredItemHeightSmall"
+         android:paddingTop="12dp"
+         android:paddingBottom="12dp"
+         android:gravity="center" />
diff --git a/android-sdk/platforms/android-34/data/res/layout/zoom_browser_accessory_buttons.xml b/android-sdk/platforms/android-34/data/res/layout/zoom_browser_accessory_buttons.xml
new file mode 100644
index 0000000000000000000000000000000000000000..a2642889ea8cd66e6d66ebaee9829bfcc426942a
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/zoom_browser_accessory_buttons.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+    <ImageView android:id="@+id/zoom_fit_page" 
+        android:background="@android:drawable/btn_browser_zoom_fit_page"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="bottom|start"
+        android:layout_marginStart="7dip"
+        />
+    <ImageView android:id="@+id/zoom_page_overview" 
+        android:background="@android:drawable/btn_browser_zoom_page_overview"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        android:layout_gravity="bottom|end"
+        android:layout_marginEnd="7dip"
+        />
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/zoom_container.xml b/android-sdk/platforms/android-34/data/res/layout/zoom_container.xml
new file mode 100644
index 0000000000000000000000000000000000000000..52bc6351be4d7f24dda5e37bfff0515c3488b5cb
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/zoom_container.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+    <ZoomControls android:id="@+id/zoomControls"
+        android:layout_gravity="center_horizontal"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        style="@style/ZoomControls"
+        android:gravity="center_horizontal"
+        android:background="@null"
+        />
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/zoom_controls.xml b/android-sdk/platforms/android-34/data/res/layout/zoom_controls.xml
new file mode 100644
index 0000000000000000000000000000000000000000..95cf1d5fa1a9110226a9d3d0607f0fd600885aac
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/zoom_controls.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+    <ZoomButton android:id="@+id/zoomOut" 
+        android:background="@android:drawable/btn_zoom_down" 
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        />
+    <ZoomButton android:id="@+id/zoomIn" 
+        android:background="@android:drawable/btn_zoom_up"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        />
+</merge>
diff --git a/android-sdk/platforms/android-34/data/res/layout/zoom_magnify.xml b/android-sdk/platforms/android-34/data/res/layout/zoom_magnify.xml
new file mode 100644
index 0000000000000000000000000000000000000000..562257c5cca2eeb4b94f04a8e7d9851dbbbe9974
--- /dev/null
+++ b/android-sdk/platforms/android-34/data/res/layout/zoom_magnify.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+**
+** Copyright 2008, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License"); 
+** you may not use this file except in compliance with the License. 
+** You may obtain a copy of the License at 
+**
+**     http://www.apache.org/licenses/LICENSE-2.0 
+**
+** Unless required by applicable law or agreed to in writing, software 
+** distributed under the License is distributed on an "AS IS" BASIS, 
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+** See the License for the specific language governing permissions and 
+** limitations under the License.
+*/
+-->
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+    <ZoomControls android:id="@+id/zoomControls"
+        android:layout_gravity="bottom|center_horizontal"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        style="@style/ZoomControls"
+        />
+    <ImageView android:id="@+id/zoomMagnify"
+        android:focusable="true"
+        android:layout_gravity="bottom|end"
+        android:paddingEnd="2dip"
+        android:src="@drawable/btn_zoom_page"
+        android:layout_width="wrap_content"
+        android:layout_height="wrap_content"
+        />
+</merge>
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..d37bd2766ac1c6c50660afff724338ab696afbbd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/__init__.py
@@ -0,0 +1,7 @@
+initialized = True
+
+def main():
+    print("Hello world!")
+
+if __name__ == '__main__':
+    main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/spam.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/spam.py
new file mode 100644
index 0000000000000000000000000000000000000000..d37bd2766ac1c6c50660afff724338ab696afbbd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__phello__/spam.py
@@ -0,0 +1,7 @@
+initialized = True
+
+def main():
+    print("Hello world!")
+
+if __name__ == '__main__':
+    main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/abc.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/abc.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ce0590c5db47c9d326ab723d1989783dd2c461d4
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/abc.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/annotationlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/annotationlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..8a00cf8babe0be1096e15cfe64686fc33282a345
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/annotationlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/antigravity.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/antigravity.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..95f3f31655b792f30af9304456b837282c8a32d1
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/antigravity.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ast.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ast.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..3f198f3744564d6c776148dd84552fb0aa706311
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ast.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/base64.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/base64.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..7721a334a3bac5c1ba5a274c97b38deb1f9e6d34
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/base64.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bdb.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bdb.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..64c57f885d4bebbd7631c21c3026d1ed5f8b8b4b
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bdb.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bisect.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bisect.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..96b27dde1788188b064439e1500925f3e410285e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bisect.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bz2.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bz2.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..8fd3202f8730cd159673ffae24e029848f879b8c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/bz2.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cProfile.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cProfile.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c16e80414afb42924bde80acc8e7396c2e692443
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cProfile.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/calendar.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/calendar.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..540ef655b65701f184f6474dfd79c7492ddc8011
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/calendar.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cmd.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cmd.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..6c96c4c93fb4ebceea4514c0619b1ccf79c7cfdc
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/cmd.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/code.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/code.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..9218e8536c49b13704cdada06a36b86bc29b94c2
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/code.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codecs.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codecs.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..b5d8262374fecd21fa89b488f8370cadf95fe7fc
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codecs.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codeop.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codeop.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..1cdfdd4371210ab47fee7f3b543001ab027bd55d
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/codeop.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/colorsys.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/colorsys.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..170e5f792a7fc133dd692cdfcd563e98d69f1416
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/colorsys.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/compileall.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/compileall.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..34c3b26f91c2e00196004ca7c20cafb795e8dd68
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/compileall.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/configparser.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/configparser.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ddbac7cec1b4d06a9e10d88275eb228168e91acc
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/configparser.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ca33dc046824503529d9bb096e7197903ba30895
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextvars.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextvars.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..b3989314a88a7e84b39a5e0975cfa46b22431e48
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/contextvars.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copy.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copy.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..cca4259a95938afc159704dbd1c7a4d476fbb31d
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copy.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copyreg.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copyreg.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..af2f962003669ff5accd55ecf51f38e009c5f442
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/copyreg.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/csv.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/csv.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..7dbff0389aa00dc8e53a0f101a989b1aad8816ba
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/csv.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dataclasses.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dataclasses.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..5de508495a97808bb5bd816205301ec08f6e15e9
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dataclasses.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/datetime.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/datetime.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..b25442a2416217c13282b196dd38acdb5c300a03
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/datetime.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/decimal.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/decimal.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a00331c8f7f5eb2f802dc237bb4e438fd4073629
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/decimal.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/difflib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/difflib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a8c1fbce425682976e7bf8730bb80891ae580470
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/difflib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dis.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dis.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..83684a9860efbc79397a95ab614eb58775aaf9c0
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/dis.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/enum.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/enum.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..28eec359ae4d3c34a12476343f96107722b3a873
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/enum.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/filecmp.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/filecmp.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..92615956837f0207eeeefb5735388f9973c6d25d
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/filecmp.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fileinput.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fileinput.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..e1494c28fb3764206adba9e00e14b3a7e5f56a63
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fileinput.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fnmatch.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fnmatch.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..cb0d03b2e941b1dc33b2b999cb395dc9e974f88b
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fnmatch.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fractions.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fractions.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..bc8f44038ff4e74c2607f92c62770afb678fd7d8
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/fractions.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ftplib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ftplib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..30248b03c2bf2bc5873c0f7416929c1bd29dc5d0
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ftplib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/functools.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/functools.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..1a92fb7dba7d4646f808188c8595a7534ce0a33c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/functools.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/genericpath.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/genericpath.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..4e1b6f744bcce318f58e30d0f17eda4b2f3f5bf2
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/genericpath.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getopt.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getopt.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a1b65778d8eb01a62de2cb59e6b88d9b7e02151c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getopt.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getpass.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getpass.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a5bf57d18b870b0acef4d96ff85dc7807e8d5762
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/getpass.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gettext.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gettext.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..7cca9ca63b555b11d503fdce162f72c9e564301e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gettext.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/glob.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/glob.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..66a4877e63a2a6dae98638fe292e6cebc9f3f21b
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/glob.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/graphlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/graphlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..8579fa987d7c0c5d381993065a4f5cb4230260d4
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/graphlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gzip.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gzip.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..8ed9e98354e28235e6d14cf8376e6570ab4d4b29
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/gzip.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hashlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hashlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..7c636d396f1ba483f70f57095d36bbe4382c4e9e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hashlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/heapq.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/heapq.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ada93ebfd77f90a3b8aafd2db661031cb98a4ff8
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/heapq.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hmac.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hmac.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..51d13f7deb00d39a2b2c28b593a63b2a491cced4
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/hmac.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/imaplib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/imaplib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..e85d9640a1985ba0c3569eedfb33e94d51faf0a8
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/imaplib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/io.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/io.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..4d6eff6d2370d0ae1ff326cdf77709d9dee32bff
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/io.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ipaddress.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ipaddress.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..2d4dc8fd965a7be1b29017ffd002ac52c109e261
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ipaddress.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/keyword.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/keyword.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c1b27c9dcba3ab18287b3f664b0d996fbc65743d
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/keyword.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/linecache.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/linecache.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..4dc67bdd398599f9fd047b7b6086e8832eaffc57
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/linecache.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/locale.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/locale.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..f75a3e3c72d213bbc22e49e3f96ce0daef00f361
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/locale.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/lzma.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/lzma.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..6f245d1aad1161edf6464e21e1449f230a1e883c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/lzma.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/mimetypes.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/mimetypes.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..4be6f58fc323889dbeb496b2ea7e5602f5f9992f
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/mimetypes.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/modulefinder.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/modulefinder.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..6c62c441d3727fa4b24c19d7e72ef6e9e9fe1cfc
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/modulefinder.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/netrc.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/netrc.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a9cbb3cc44a250089c9c9c3391228d66b9c963e0
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/netrc.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ntpath.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ntpath.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..e8deca80f2059afadc7b0a39f604a1c0e9697e11
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ntpath.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/nturl2path.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/nturl2path.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c70da059e9819738f6ee01fa5d614dbf7db66411
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/nturl2path.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/numbers.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/numbers.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..57100b9d555109c4058ed230a471a8733a4faf72
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/numbers.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/opcode.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/opcode.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..02ecab987bb33eeea7bebb8985048135a3ecf2c8
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/opcode.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/operator.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/operator.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..b46f6374f220aa32e42d96a60239e49fc761ab99
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/operator.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/optparse.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/optparse.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c8d77c614c24e0ccc169c899078a73157ca4f434
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/optparse.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/os.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/os.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..9cd5ef0ae3d42ec55f8bcb0b88d743fc9055a84f
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/os.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickle.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickle.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..63b70a7858a4cf8cb6536214f8f10cf744581c83
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickle.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickletools.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickletools.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c341cf8abe632c1071eff2e26c6caec6cbc90e32
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pickletools.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pkgutil.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pkgutil.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..07dc6c5f49b6f98272e1abe239bd34994e93a3c6
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pkgutil.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/platform.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/platform.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..799aa7fc2ac2271f1f106d56e8719b4e42084cfd
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/platform.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/plistlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/plistlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ed067b18315e7737813812e9fc5b3a103a4fc12c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/plistlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/poplib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/poplib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..6b9d4cff16836eac726b4568e3c2ad2ee1c4ca3e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/poplib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/posixpath.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/posixpath.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..1569c6ca591ed320455062ca30595bb74db247c2
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/posixpath.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pprint.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pprint.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c6d7a7cd7f209116f8ce1084e379f8b7820f2204
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pprint.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/profile.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/profile.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ddbf1381297a604ba188345bcbd3bef73f891eb3
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/profile.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pstats.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pstats.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..5210730139b8f9778fc8d53d318221f68980d05f
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pstats.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pty.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pty.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c97f8fcb1925661f767aadbefbe7f848f0e03e4f
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pty.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/py_compile.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/py_compile.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..3c6e2f45f2bbeed9143b11e8f53ec196f9ddb872
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/py_compile.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pyclbr.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pyclbr.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..40c403a9e596cc95df648b30387d76623d1e2f2f
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/pyclbr.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/queue.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/queue.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..4275710d740da35f2a9ff4d21d1f209a9ec0ce77
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/queue.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/quopri.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/quopri.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..9bffbbfb5e4229b6a4ef889e99356b48bf8f1392
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/quopri.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/random.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/random.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c6ba945b420de0e35a1e9421d0373dbeb22d176a
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/random.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/reprlib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/reprlib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..8946093b483a6fab312059862e63380bd84339f9
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/reprlib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/rlcompleter.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/rlcompleter.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..3da7835db8845a62f8074bcb5f6065b53c65a998
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/rlcompleter.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/runpy.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/runpy.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..f1a2d2037e0ff49052a7dcb413817cce8ee148d9
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/runpy.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sched.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sched.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..0937e4489d8adef08e53896c1c1d5530aff78b63
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sched.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/secrets.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/secrets.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..0b848e833f108a4594569804365cdfd085f38b87
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/secrets.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/selectors.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/selectors.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..e097bed4deecdce69ef4cdf7e4d15c0caf658148
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/selectors.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shelve.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shelve.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..75c9051ab1eb1a512ebe0f58b55040c926ee576e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shelve.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shlex.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shlex.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..d27ad095899eaf0f3a193845cf78f04c533ad4a9
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shlex.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shutil.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shutil.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..d6d8ab8d27e878ca1496af9384ff91422c16c232
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/shutil.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/signal.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/signal.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..18099c134148e2e90b5e155dc1de876bc43675ff
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/signal.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/site.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/site.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..285beff4b98bb166bf4a858e9d059000f358c849
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/site.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/smtplib.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/smtplib.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..9f07f648fe4870e983a1b5217ec7a5b778e324eb
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/smtplib.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socket.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socket.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..014b4410c5e7cdb53eb49c682d61c1e8bcbec85c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socket.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socketserver.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socketserver.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..94b06a3918c29d6d6b492b069aeb6139f40ac390
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/socketserver.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_compile.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_compile.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..09f03516cd0e828804fa5da2f581707746a65a7c
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_compile.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_constants.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_constants.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..3e518efc9cfb41fb64594a9c1a960c46239f7b02
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_constants.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_parse.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_parse.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c429da98f36a0f4c4e5d00b1484ba109896b220e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/sre_parse.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ssl.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ssl.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..e869cac5fdd131b9b262b7bebd2283d1a2e76b78
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/ssl.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stat.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stat.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..306bf27da95afc5caf897d691675bfe811ce723e
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stat.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/statistics.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/statistics.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..76286c1e12063faa2ff4bf9539e54a7c7ab48327
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/statistics.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stringprep.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stringprep.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..c5f0f82c0c8b0a36dc38ddeff0270d0359314caa
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/stringprep.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/struct.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/struct.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..a87fdfbab4b5574030a9691e50053e5d0bf442d8
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/struct.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/subprocess.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/subprocess.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..88dee68f69c83e297b1e13b44cfea51db8cc6264
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/subprocess.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/symtable.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/symtable.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..0a68d251bfdecc617fecb20270cf3f40b811f607
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/symtable.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tabnanny.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tabnanny.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..2e15530868e19f2450b4bc8d945193c4f21e1d3a
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tabnanny.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tempfile.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tempfile.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..9a8fac24ed78441619032c88f5edd4cdfc5740c5
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/tempfile.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/textwrap.cpython-314.pyc b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/textwrap.cpython-314.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..1424dd736258f98da0f359f1bc287576b8e922e9
Binary files /dev/null and b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/__pycache__/textwrap.cpython-314.pyc differ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..1693cbd0b98b74c36991fef31cf8f5d63ee7b0ca
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__init__.py
@@ -0,0 +1,19 @@
+#   Copyright 2000-2008 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..9c66812e13afa6ebd558cd45732f894c2f09432f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/__main__.py
@@ -0,0 +1,10 @@
+# Important: don't add things to this module, as they will end up in the REPL's
+# default globals.  Use _pyrepl.main instead.
+
+# Avoid caching this file by linecache and incorrectly report tracebacks.
+# See https://github.com/python/cpython/issues/129098.
+__spec__ = __loader__ = None
+
+if __name__ == "__main__":
+    from .main import interactive_console as __pyrepl_interactive_console
+    __pyrepl_interactive_console()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_module_completer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_module_completer.py
new file mode 100644
index 0000000000000000000000000000000000000000..2098d0a54aba31660b99a58b427d02e808b4c761
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_module_completer.py
@@ -0,0 +1,426 @@
+from __future__ import annotations
+
+import importlib
+import os
+import pkgutil
+import sys
+import token
+import tokenize
+from importlib.machinery import FileFinder
+from io import StringIO
+from contextlib import contextmanager
+from dataclasses import dataclass
+from itertools import chain
+from tokenize import TokenInfo
+
+TYPE_CHECKING = False
+
+if TYPE_CHECKING:
+    from typing import Any, Iterable, Iterator, Mapping
+
+
+HARDCODED_SUBMODULES = {
+    # Standard library submodules that are not detected by pkgutil.iter_modules
+    # but can be imported, so should be proposed in completion
+    "collections": ["abc"],
+    "os": ["path"],
+    "xml.parsers.expat": ["errors", "model"],
+}
+
+
+def make_default_module_completer() -> ModuleCompleter:
+    # Inside pyrepl, __package__ is set to None by default
+    return ModuleCompleter(namespace={'__package__': None})
+
+
+class ModuleCompleter:
+    """A completer for Python import statements.
+
+    Examples:
+        - import <tab>
+        - import foo<tab>
+        - import foo.<tab>
+        - import foo as bar, baz<tab>
+
+        - from <tab>
+        - from foo<tab>
+        - from foo import <tab>
+        - from foo import bar<tab>
+        - from foo import (bar as baz, qux<tab>
+    """
+
+    def __init__(self, namespace: Mapping[str, Any] | None = None) -> None:
+        self.namespace = namespace or {}
+        self._global_cache: list[pkgutil.ModuleInfo] = []
+        self._curr_sys_path: list[str] = sys.path[:]
+        self._stdlib_path = os.path.dirname(importlib.__path__[0])
+
+    def get_completions(self, line: str) -> list[str] | None:
+        """Return the next possible import completions for 'line'."""
+        result = ImportParser(line).parse()
+        if not result:
+            return None
+        try:
+            return self.complete(*result)
+        except Exception:
+            # Some unexpected error occurred, make it look like
+            # no completions are available
+            return []
+
+    def complete(self, from_name: str | None, name: str | None) -> list[str]:
+        if from_name is None:
+            # import x.y.z<tab>
+            assert name is not None
+            path, prefix = self.get_path_and_prefix(name)
+            modules = self.find_modules(path, prefix)
+            return [self.format_completion(path, module) for module in modules]
+
+        if name is None:
+            # from x.y.z<tab>
+            path, prefix = self.get_path_and_prefix(from_name)
+            modules = self.find_modules(path, prefix)
+            return [self.format_completion(path, module) for module in modules]
+
+        # from x.y import z<tab>
+        return self.find_modules(from_name, name)
+
+    def find_modules(self, path: str, prefix: str) -> list[str]:
+        """Find all modules under 'path' that start with 'prefix'."""
+        modules = self._find_modules(path, prefix)
+        # Filter out invalid module names
+        # (for example those containing dashes that cannot be imported with 'import')
+        return [mod for mod in modules if mod.isidentifier()]
+
+    def _find_modules(self, path: str, prefix: str) -> list[str]:
+        if not path:
+            # Top-level import (e.g. `import foo<tab>`` or `from foo<tab>`)`
+            builtin_modules = [name for name in sys.builtin_module_names
+                               if self.is_suggestion_match(name, prefix)]
+            third_party_modules = [module.name for module in self.global_cache
+                                   if self.is_suggestion_match(module.name, prefix)]
+            return sorted(builtin_modules + third_party_modules)
+
+        if path.startswith('.'):
+            # Convert relative path to absolute path
+            package = self.namespace.get('__package__', '')
+            path = self.resolve_relative_name(path, package)  # type: ignore[assignment]
+            if path is None:
+                return []
+
+        modules: Iterable[pkgutil.ModuleInfo] = self.global_cache
+        imported_module = sys.modules.get(path.split('.')[0])
+        if imported_module:
+            # Filter modules to those who name and specs match the
+            # imported module to avoid invalid suggestions
+            spec = imported_module.__spec__
+            if spec:
+                modules = [mod for mod in modules
+                           if mod.name == spec.name
+                           and mod.module_finder.find_spec(mod.name, None) == spec]
+            else:
+                modules = []
+
+        is_stdlib_import: bool | None = None
+        for segment in path.split('.'):
+            modules = [mod_info for mod_info in modules
+                       if mod_info.ispkg and mod_info.name == segment]
+            if is_stdlib_import is None:
+                # Top-level import decide if we import from stdlib or not
+                is_stdlib_import = all(
+                    self._is_stdlib_module(mod_info) for mod_info in modules
+                )
+            modules = self.iter_submodules(modules)
+
+        module_names = [module.name for module in modules]
+        if is_stdlib_import:
+            module_names.extend(HARDCODED_SUBMODULES.get(path, ()))
+        return [module_name for module_name in module_names
+                if self.is_suggestion_match(module_name, prefix)]
+
+    def _is_stdlib_module(self, module_info: pkgutil.ModuleInfo) -> bool:
+        return (isinstance(module_info.module_finder, FileFinder)
+                and module_info.module_finder.path == self._stdlib_path)
+
+    def is_suggestion_match(self, module_name: str, prefix: str) -> bool:
+        if prefix:
+            return module_name.startswith(prefix)
+        # For consistency with attribute completion, which
+        # does not suggest private attributes unless requested.
+        return not module_name.startswith("_")
+
+    def iter_submodules(self, parent_modules: list[pkgutil.ModuleInfo]) -> Iterator[pkgutil.ModuleInfo]:
+        """Iterate over all submodules of the given parent modules."""
+        specs = [info.module_finder.find_spec(info.name, None)
+                 for info in parent_modules if info.ispkg]
+        search_locations = set(chain.from_iterable(
+            getattr(spec, 'submodule_search_locations', [])
+            for spec in specs if spec
+        ))
+        return pkgutil.iter_modules(search_locations)
+
+    def get_path_and_prefix(self, dotted_name: str) -> tuple[str, str]:
+        """
+        Split a dotted name into an import path and a
+        final prefix that is to be completed.
+
+        Examples:
+            'foo.bar' -> 'foo', 'bar'
+            'foo.' -> 'foo', ''
+            '.foo' -> '.', 'foo'
+        """
+        if '.' not in dotted_name:
+            return '', dotted_name
+        if dotted_name.startswith('.'):
+            stripped = dotted_name.lstrip('.')
+            dots = '.' * (len(dotted_name) - len(stripped))
+            if '.' not in stripped:
+                return dots, stripped
+            path, prefix = stripped.rsplit('.', 1)
+            return dots + path, prefix
+        path, prefix = dotted_name.rsplit('.', 1)
+        return path, prefix
+
+    def format_completion(self, path: str, module: str) -> str:
+        if path == '' or path.endswith('.'):
+            return f'{path}{module}'
+        return f'{path}.{module}'
+
+    def resolve_relative_name(self, name: str, package: str) -> str | None:
+        """Resolve a relative module name to an absolute name.
+
+        Example: resolve_relative_name('.foo', 'bar') -> 'bar.foo'
+        """
+        # taken from importlib._bootstrap
+        level = 0
+        for character in name:
+            if character != '.':
+                break
+            level += 1
+        bits = package.rsplit('.', level - 1)
+        if len(bits) < level:
+            return None
+        base = bits[0]
+        name = name[level:]
+        return f'{base}.{name}' if name else base
+
+    @property
+    def global_cache(self) -> list[pkgutil.ModuleInfo]:
+        """Global module cache"""
+        if not self._global_cache or self._curr_sys_path != sys.path:
+            self._curr_sys_path = sys.path[:]
+            self._global_cache = list(pkgutil.iter_modules())
+        return self._global_cache
+
+
+class ImportParser:
+    """
+    Parses incomplete import statements that are
+    suitable for autocomplete suggestions.
+
+    Examples:
+        - import foo          -> Result(from_name=None, name='foo')
+        - import foo.         -> Result(from_name=None, name='foo.')
+        - from foo            -> Result(from_name='foo', name=None)
+        - from foo import bar -> Result(from_name='foo', name='bar')
+        - from .foo import (  -> Result(from_name='.foo', name='')
+
+    Note that the parser works in reverse order, starting from the
+    last token in the input string. This makes the parser more robust
+    when parsing multiple statements.
+    """
+    _ignored_tokens = {
+        token.INDENT, token.DEDENT, token.COMMENT,
+        token.NL, token.NEWLINE, token.ENDMARKER
+    }
+    _keywords = {'import', 'from', 'as'}
+
+    def __init__(self, code: str) -> None:
+        self.code = code
+        tokens = []
+        try:
+            for t in tokenize.generate_tokens(StringIO(code).readline):
+                if t.type not in self._ignored_tokens:
+                    tokens.append(t)
+        except tokenize.TokenError as e:
+            if 'unexpected EOF' not in str(e):
+                # unexpected EOF is fine, since we're parsing an
+                # incomplete statement, but other errors are not
+                # because we may not have all the tokens so it's
+                # safer to bail out
+                tokens = []
+        except SyntaxError:
+            tokens = []
+        self.tokens = TokenQueue(tokens[::-1])
+
+    def parse(self) -> tuple[str | None, str | None] | None:
+        if not (res := self._parse()):
+            return None
+        return res.from_name, res.name
+
+    def _parse(self) -> Result | None:
+        with self.tokens.save_state():
+            return self.parse_from_import()
+        with self.tokens.save_state():
+            return self.parse_import()
+
+    def parse_import(self) -> Result:
+        if self.code.rstrip().endswith('import') and self.code.endswith(' '):
+            return Result(name='')
+        if self.tokens.peek_string(','):
+            name = ''
+        else:
+            if self.code.endswith(' '):
+                raise ParseError('parse_import')
+            name = self.parse_dotted_name()
+        if name.startswith('.'):
+            raise ParseError('parse_import')
+        while self.tokens.peek_string(','):
+            self.tokens.pop()
+            self.parse_dotted_as_name()
+        if self.tokens.peek_string('import'):
+            return Result(name=name)
+        raise ParseError('parse_import')
+
+    def parse_from_import(self) -> Result:
+        stripped = self.code.rstrip()
+        if stripped.endswith('import') and self.code.endswith(' '):
+            return Result(from_name=self.parse_empty_from_import(), name='')
+        if stripped.endswith('from') and self.code.endswith(' '):
+            return Result(from_name='')
+        if self.tokens.peek_string('(') or self.tokens.peek_string(','):
+            return Result(from_name=self.parse_empty_from_import(), name='')
+        if self.code.endswith(' '):
+            raise ParseError('parse_from_import')
+        name = self.parse_dotted_name()
+        if '.' in name:
+            self.tokens.pop_string('from')
+            return Result(from_name=name)
+        if self.tokens.peek_string('from'):
+            return Result(from_name=name)
+        from_name = self.parse_empty_from_import()
+        return Result(from_name=from_name, name=name)
+
+    def parse_empty_from_import(self) -> str:
+        if self.tokens.peek_string(','):
+            self.tokens.pop()
+            self.parse_as_names()
+        if self.tokens.peek_string('('):
+            self.tokens.pop()
+        self.tokens.pop_string('import')
+        return self.parse_from()
+
+    def parse_from(self) -> str:
+        from_name = self.parse_dotted_name()
+        self.tokens.pop_string('from')
+        return from_name
+
+    def parse_dotted_as_name(self) -> str:
+        self.tokens.pop_name()
+        if self.tokens.peek_string('as'):
+            self.tokens.pop()
+        with self.tokens.save_state():
+            return self.parse_dotted_name()
+
+    def parse_dotted_name(self) -> str:
+        name = []
+        if self.tokens.peek_string('.'):
+            name.append('.')
+            self.tokens.pop()
+        if (self.tokens.peek_name()
+            and (tok := self.tokens.peek())
+            and tok.string not in self._keywords):
+            name.append(self.tokens.pop_name())
+        if not name:
+            raise ParseError('parse_dotted_name')
+        while self.tokens.peek_string('.'):
+            name.append('.')
+            self.tokens.pop()
+            if (self.tokens.peek_name()
+                and (tok := self.tokens.peek())
+                and tok.string not in self._keywords):
+                name.append(self.tokens.pop_name())
+            else:
+                break
+
+        while self.tokens.peek_string('.'):
+            name.append('.')
+            self.tokens.pop()
+        return ''.join(name[::-1])
+
+    def parse_as_names(self) -> None:
+        self.parse_as_name()
+        while self.tokens.peek_string(','):
+            self.tokens.pop()
+            self.parse_as_name()
+
+    def parse_as_name(self) -> None:
+        self.tokens.pop_name()
+        if self.tokens.peek_string('as'):
+            self.tokens.pop()
+            self.tokens.pop_name()
+
+
+class ParseError(Exception):
+    pass
+
+
+@dataclass(frozen=True)
+class Result:
+    from_name: str | None = None
+    name: str | None = None
+
+
+class TokenQueue:
+    """Provides helper functions for working with a sequence of tokens."""
+
+    def __init__(self, tokens: list[TokenInfo]) -> None:
+        self.tokens: list[TokenInfo] = tokens
+        self.index: int = 0
+        self.stack: list[int] = []
+
+    @contextmanager
+    def save_state(self) -> Any:
+        try:
+            self.stack.append(self.index)
+            yield
+        except ParseError:
+            self.index = self.stack.pop()
+        else:
+            self.stack.pop()
+
+    def __bool__(self) -> bool:
+        return self.index < len(self.tokens)
+
+    def peek(self) -> TokenInfo | None:
+        if not self:
+            return None
+        return self.tokens[self.index]
+
+    def peek_name(self) -> bool:
+        if not (tok := self.peek()):
+            return False
+        return tok.type == token.NAME
+
+    def pop_name(self) -> str:
+        tok = self.pop()
+        if tok.type != token.NAME:
+            raise ParseError('pop_name')
+        return tok.string
+
+    def peek_string(self, string: str) -> bool:
+        if not (tok := self.peek()):
+            return False
+        return tok.string == string
+
+    def pop_string(self, string: str) -> str:
+        tok = self.pop()
+        if tok.string != string:
+            raise ParseError('pop_string')
+        return tok.string
+
+    def pop(self) -> TokenInfo:
+        if not self:
+            raise ParseError('pop')
+        tok = self.tokens[self.index]
+        self.index += 1
+        return tok
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_threading_handler.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_threading_handler.py
new file mode 100644
index 0000000000000000000000000000000000000000..82f5e8650a20728a1632199ca1af6b08d79f2df6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/_threading_handler.py
@@ -0,0 +1,74 @@
+from __future__ import annotations
+
+from dataclasses import dataclass, field
+import traceback
+
+
+TYPE_CHECKING = False
+if TYPE_CHECKING:
+    from threading import Thread
+    from types import TracebackType
+    from typing import Protocol
+
+    class ExceptHookArgs(Protocol):
+        @property
+        def exc_type(self) -> type[BaseException]: ...
+        @property
+        def exc_value(self) -> BaseException | None: ...
+        @property
+        def exc_traceback(self) -> TracebackType | None: ...
+        @property
+        def thread(self) -> Thread | None: ...
+
+    class ShowExceptions(Protocol):
+        def __call__(self) -> int: ...
+        def add(self, s: str) -> None: ...
+
+    from .reader import Reader
+
+
+def install_threading_hook(reader: Reader) -> None:
+    import threading
+
+    @dataclass
+    class ExceptHookHandler:
+        lock: threading.Lock = field(default_factory=threading.Lock)
+        messages: list[str] = field(default_factory=list)
+
+        def show(self) -> int:
+            count = 0
+            with self.lock:
+                if not self.messages:
+                    return 0
+                reader.restore()
+                for tb in self.messages:
+                    count += 1
+                    if tb:
+                        print(tb)
+                self.messages.clear()
+                reader.scheduled_commands.append("ctrl-c")
+                reader.prepare()
+            return count
+
+        def add(self, s: str) -> None:
+            with self.lock:
+                self.messages.append(s)
+
+        def exception(self, args: ExceptHookArgs) -> None:
+            lines = traceback.format_exception(
+                args.exc_type,
+                args.exc_value,
+                args.exc_traceback,
+                colorize=reader.can_colorize,
+            )  # type: ignore[call-overload]
+            pre = f"\nException in {args.thread.name}:\n" if args.thread else "\n"
+            tb = pre + "".join(lines)
+            self.add(tb)
+
+        def __call__(self) -> int:
+            return self.show()
+
+
+    handler = ExceptHookHandler()
+    reader.threading_hook = handler
+    threading.excepthook = handler.exception
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/base_eventqueue.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/base_eventqueue.py
new file mode 100644
index 0000000000000000000000000000000000000000..0589a0f437ec7c5ba9e041b66e537c3a5ec1f777
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/base_eventqueue.py
@@ -0,0 +1,110 @@
+#   Copyright 2000-2008 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""
+OS-independent base for an event and VT sequence scanner
+
+See unix_eventqueue and windows_eventqueue for subclasses.
+"""
+
+from collections import deque
+
+from . import keymap
+from .console import Event
+from .trace import trace
+
+class BaseEventQueue:
+    def __init__(self, encoding: str, keymap_dict: dict[bytes, str]) -> None:
+        self.compiled_keymap = keymap.compile_keymap(keymap_dict)
+        self.keymap = self.compiled_keymap
+        trace("keymap {k!r}", k=self.keymap)
+        self.encoding = encoding
+        self.events: deque[Event] = deque()
+        self.buf = bytearray()
+
+    def get(self) -> Event | None:
+        """
+        Retrieves the next event from the queue.
+        """
+        if self.events:
+            return self.events.popleft()
+        else:
+            return None
+
+    def empty(self) -> bool:
+        """
+        Checks if the queue is empty.
+        """
+        return not self.events
+
+    def flush_buf(self) -> bytearray:
+        """
+        Flushes the buffer and returns its contents.
+        """
+        old = self.buf
+        self.buf = bytearray()
+        return old
+
+    def insert(self, event: Event) -> None:
+        """
+        Inserts an event into the queue.
+        """
+        trace('added event {event}', event=event)
+        self.events.append(event)
+
+    def push(self, char: int | bytes) -> None:
+        """
+        Processes a character by updating the buffer and handling special key mappings.
+        """
+        assert isinstance(char, (int, bytes))
+        ord_char = char if isinstance(char, int) else ord(char)
+        char = ord_char.to_bytes()
+        self.buf.append(ord_char)
+
+        if char in self.keymap:
+            if self.keymap is self.compiled_keymap:
+                # sanity check, buffer is empty when a special key comes
+                assert len(self.buf) == 1
+            k = self.keymap[char]
+            trace('found map {k!r}', k=k)
+            if isinstance(k, dict):
+                self.keymap = k
+            else:
+                self.insert(Event('key', k, bytes(self.flush_buf())))
+                self.keymap = self.compiled_keymap
+
+        elif self.buf and self.buf[0] == 27:  # escape
+            # escape sequence not recognized by our keymap: propagate it
+            # outside so that i can be recognized as an M-... key (see also
+            # the docstring in keymap.py
+            trace('unrecognized escape sequence, propagating...')
+            self.keymap = self.compiled_keymap
+            self.insert(Event('key', '\033', b'\033'))
+            for _c in self.flush_buf()[1:]:
+                self.push(_c)
+
+        else:
+            try:
+                decoded = bytes(self.buf).decode(self.encoding)
+            except UnicodeError:
+                return
+            else:
+                self.insert(Event('key', decoded, bytes(self.flush_buf())))
+            self.keymap = self.compiled_keymap
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/commands.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/commands.py
new file mode 100644
index 0000000000000000000000000000000000000000..10127e58897a580232c3f432f1ce2aeba2a357b8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/commands.py
@@ -0,0 +1,505 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Antonio Cuni
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+import os
+import time
+
+# Categories of actions:
+#  killing
+#  yanking
+#  motion
+#  editing
+#  history
+#  finishing
+# [completion]
+
+from .trace import trace
+
+# types
+if False:
+    from .historical_reader import HistoricalReader
+
+
+class Command:
+    finish: bool = False
+    kills_digit_arg: bool = True
+
+    def __init__(
+        self, reader: HistoricalReader, event_name: str, event: list[str]
+    ) -> None:
+        # Reader should really be "any reader" but there's too much usage of
+        # HistoricalReader methods and fields in the code below for us to
+        # refactor at the moment.
+
+        self.reader = reader
+        self.event = event
+        self.event_name = event_name
+
+    def do(self) -> None:
+        pass
+
+
+class KillCommand(Command):
+    def kill_range(self, start: int, end: int) -> None:
+        if start == end:
+            return
+        r = self.reader
+        b = r.buffer
+        text = b[start:end]
+        del b[start:end]
+        if is_kill(r.last_command):
+            if start < r.pos:
+                r.kill_ring[-1] = text + r.kill_ring[-1]
+            else:
+                r.kill_ring[-1] = r.kill_ring[-1] + text
+        else:
+            r.kill_ring.append(text)
+        r.pos = start
+        r.dirty = True
+
+
+class YankCommand(Command):
+    pass
+
+
+class MotionCommand(Command):
+    pass
+
+
+class EditCommand(Command):
+    pass
+
+
+class FinishCommand(Command):
+    finish = True
+    pass
+
+
+def is_kill(command: type[Command] | None) -> bool:
+    return command is not None and issubclass(command, KillCommand)
+
+
+def is_yank(command: type[Command] | None) -> bool:
+    return command is not None and issubclass(command, YankCommand)
+
+
+# etc
+
+
+class digit_arg(Command):
+    kills_digit_arg = False
+
+    def do(self) -> None:
+        r = self.reader
+        c = self.event[-1]
+        if c == "-":
+            if r.arg is not None:
+                r.arg = -r.arg
+            else:
+                r.arg = -1
+        else:
+            d = int(c)
+            if r.arg is None:
+                r.arg = d
+            else:
+                if r.arg < 0:
+                    r.arg = 10 * r.arg - d
+                else:
+                    r.arg = 10 * r.arg + d
+        r.dirty = True
+
+
+class clear_screen(Command):
+    def do(self) -> None:
+        r = self.reader
+        r.console.clear()
+        r.dirty = True
+
+
+class refresh(Command):
+    def do(self) -> None:
+        self.reader.dirty = True
+
+
+class repaint(Command):
+    def do(self) -> None:
+        self.reader.dirty = True
+        self.reader.console.repaint()
+
+
+class kill_line(KillCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        eol = r.eol()
+        for c in b[r.pos : eol]:
+            if not c.isspace():
+                self.kill_range(r.pos, eol)
+                return
+        else:
+            self.kill_range(r.pos, eol + 1)
+
+
+class unix_line_discard(KillCommand):
+    def do(self) -> None:
+        r = self.reader
+        self.kill_range(r.bol(), r.pos)
+
+
+class unix_word_rubout(KillCommand):
+    def do(self) -> None:
+        r = self.reader
+        for i in range(r.get_arg()):
+            self.kill_range(r.bow(), r.pos)
+
+
+class kill_word(KillCommand):
+    def do(self) -> None:
+        r = self.reader
+        for i in range(r.get_arg()):
+            self.kill_range(r.pos, r.eow())
+
+
+class backward_kill_word(KillCommand):
+    def do(self) -> None:
+        r = self.reader
+        for i in range(r.get_arg()):
+            self.kill_range(r.bow(), r.pos)
+
+
+class yank(YankCommand):
+    def do(self) -> None:
+        r = self.reader
+        if not r.kill_ring:
+            r.error("nothing to yank")
+            return
+        r.insert(r.kill_ring[-1])
+
+
+class yank_pop(YankCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        if not r.kill_ring:
+            r.error("nothing to yank")
+            return
+        if not is_yank(r.last_command):
+            r.error("previous command was not a yank")
+            return
+        repl = len(r.kill_ring[-1])
+        r.kill_ring.insert(0, r.kill_ring.pop())
+        t = r.kill_ring[-1]
+        b[r.pos - repl : r.pos] = t
+        r.pos = r.pos - repl + len(t)
+        r.dirty = True
+
+
+class interrupt(FinishCommand):
+    def do(self) -> None:
+        import signal
+
+        self.reader.console.finish()
+        self.reader.finish()
+        os.kill(os.getpid(), signal.SIGINT)
+
+
+class ctrl_c(Command):
+    def do(self) -> None:
+        self.reader.console.finish()
+        self.reader.finish()
+        raise KeyboardInterrupt
+
+
+class suspend(Command):
+    def do(self) -> None:
+        import signal
+
+        r = self.reader
+        p = r.pos
+        r.console.finish()
+        os.kill(os.getpid(), signal.SIGSTOP)
+        ## this should probably be done
+        ## in a handler for SIGCONT?
+        r.console.prepare()
+        r.pos = p
+        # r.posxy = 0, 0  # XXX this is invalid
+        r.dirty = True
+        r.console.screen = []
+
+
+class up(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        for _ in range(r.get_arg()):
+            x, y = r.pos2xy()
+            new_y = y - 1
+
+            if r.bol() == 0:
+                if r.historyi > 0:
+                    r.select_item(r.historyi - 1)
+                    return
+                r.pos = 0
+                r.error("start of buffer")
+                return
+
+            if (
+                x
+                > (
+                    new_x := r.max_column(new_y)
+                )  # we're past the end of the previous line
+                or x == r.max_column(y)
+                and any(
+                    not i.isspace() for i in r.buffer[r.bol() :]
+                )  # move between eols
+            ):
+                x = new_x
+
+            r.setpos_from_xy(x, new_y)
+
+
+class down(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        for _ in range(r.get_arg()):
+            x, y = r.pos2xy()
+            new_y = y + 1
+
+            if r.eol() == len(b):
+                if r.historyi < len(r.history):
+                    r.select_item(r.historyi + 1)
+                    r.pos = r.eol(0)
+                    return
+                r.pos = len(b)
+                r.error("end of buffer")
+                return
+
+            if (
+                x
+                > (
+                    new_x := r.max_column(new_y)
+                )  # we're past the end of the previous line
+                or x == r.max_column(y)
+                and any(
+                    not i.isspace() for i in r.buffer[r.bol() :]
+                )  # move between eols
+            ):
+                x = new_x
+
+            r.setpos_from_xy(x, new_y)
+
+
+class left(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        for _ in range(r.get_arg()):
+            p = r.pos - 1
+            if p >= 0:
+                r.pos = p
+            else:
+                self.reader.error("start of buffer")
+
+
+class right(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        for _ in range(r.get_arg()):
+            p = r.pos + 1
+            if p <= len(b):
+                r.pos = p
+            else:
+                self.reader.error("end of buffer")
+
+
+class beginning_of_line(MotionCommand):
+    def do(self) -> None:
+        self.reader.pos = self.reader.bol()
+
+
+class end_of_line(MotionCommand):
+    def do(self) -> None:
+        self.reader.pos = self.reader.eol()
+
+
+class home(MotionCommand):
+    def do(self) -> None:
+        self.reader.pos = 0
+
+
+class end(MotionCommand):
+    def do(self) -> None:
+        self.reader.pos = len(self.reader.buffer)
+
+
+class forward_word(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        for i in range(r.get_arg()):
+            r.pos = r.eow()
+
+
+class backward_word(MotionCommand):
+    def do(self) -> None:
+        r = self.reader
+        for i in range(r.get_arg()):
+            r.pos = r.bow()
+
+
+class self_insert(EditCommand):
+    def do(self) -> None:
+        r = self.reader
+        text = self.event * r.get_arg()
+        r.insert(text)
+        if r.paste_mode:
+            data = ""
+            ev = r.console.getpending()
+            data += ev.data
+            if data:
+                r.insert(data)
+                r.last_refresh_cache.invalidated = True
+
+
+class insert_nl(EditCommand):
+    def do(self) -> None:
+        r = self.reader
+        r.insert("\n" * r.get_arg())
+
+
+class transpose_characters(EditCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        s = r.pos - 1
+        if s < 0:
+            r.error("cannot transpose at start of buffer")
+        else:
+            if s == len(b):
+                s -= 1
+            t = min(s + r.get_arg(), len(b) - 1)
+            c = b[s]
+            del b[s]
+            b.insert(t, c)
+            r.pos = t
+            r.dirty = True
+
+
+class backspace(EditCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        for i in range(r.get_arg()):
+            if r.pos > 0:
+                r.pos -= 1
+                del b[r.pos]
+                r.dirty = True
+            else:
+                self.reader.error("can't backspace at start")
+
+
+class delete(EditCommand):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        if self.event[-1] == "\004":
+            if b and b[-1].endswith("\n"):
+                self.finish = True
+            elif (
+                r.pos == 0
+                and len(b) == 0  # this is something of a hack
+            ):
+                r.update_screen()
+                r.console.finish()
+                raise EOFError
+
+        for i in range(r.get_arg()):
+            if r.pos != len(b):
+                del b[r.pos]
+                r.dirty = True
+            else:
+                self.reader.error("end of buffer")
+
+
+class accept(FinishCommand):
+    def do(self) -> None:
+        pass
+
+
+class help(Command):
+    def do(self) -> None:
+        import _sitebuiltins
+
+        with self.reader.suspend():
+            self.reader.msg = _sitebuiltins._Helper()()  # type: ignore[assignment]
+
+
+class invalid_key(Command):
+    def do(self) -> None:
+        pending = self.reader.console.getpending()
+        s = "".join(self.event) + pending.data
+        self.reader.error("`%r' not bound" % s)
+
+
+class invalid_command(Command):
+    def do(self) -> None:
+        s = self.event_name
+        self.reader.error("command `%s' not known" % s)
+
+
+class show_history(Command):
+    def do(self) -> None:
+        from .pager import get_pager
+        from site import gethistoryfile
+
+        history = os.linesep.join(self.reader.history[:])
+        self.reader.console.restore()
+        pager = get_pager()
+        pager(history, gethistoryfile())
+        self.reader.console.prepare()
+
+        # We need to copy over the state so that it's consistent between
+        # console and reader, and console does not overwrite/append stuff
+        self.reader.console.screen = self.reader.screen.copy()
+        self.reader.console.posxy = self.reader.cxy
+
+
+class paste_mode(Command):
+    def do(self) -> None:
+        self.reader.paste_mode = not self.reader.paste_mode
+        self.reader.dirty = True
+
+
+class perform_bracketed_paste(Command):
+    def do(self) -> None:
+        done = "\x1b[201~"
+        data = ""
+        start = time.time()
+        while done not in data:
+            ev = self.reader.console.getpending()
+            data += ev.data
+        trace(
+            "bracketed pasting of {l} chars done in {s:.2f}s",
+            l=len(data),
+            s=time.time() - start,
+        )
+        self.reader.insert(data.replace(done, ""))
+        self.reader.last_refresh_cache.invalidated = True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/completing_reader.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/completing_reader.py
new file mode 100644
index 0000000000000000000000000000000000000000..9d2d43be5144e8c07237c340080b1c7cb21fd8db
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/completing_reader.py
@@ -0,0 +1,299 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Antonio Cuni
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+from dataclasses import dataclass, field
+
+import re
+from . import commands, console, reader
+from .reader import Reader
+
+
+# types
+Command = commands.Command
+if False:
+    from .types import KeySpec, CommandName
+
+
+def prefix(wordlist: list[str], j: int = 0) -> str:
+    d = {}
+    i = j
+    try:
+        while 1:
+            for word in wordlist:
+                d[word[i]] = 1
+            if len(d) > 1:
+                return wordlist[0][j:i]
+            i += 1
+            d = {}
+    except IndexError:
+        return wordlist[0][j:i]
+    return ""
+
+
+STRIPCOLOR_REGEX = re.compile(r"\x1B\[([0-9]{1,3}(;[0-9]{1,2})?)?[m|K]")
+
+def stripcolor(s: str) -> str:
+    return STRIPCOLOR_REGEX.sub('', s)
+
+
+def real_len(s: str) -> int:
+    return len(stripcolor(s))
+
+
+def left_align(s: str, maxlen: int) -> str:
+    stripped = stripcolor(s)
+    if len(stripped) > maxlen:
+        # too bad, we remove the color
+        return stripped[:maxlen]
+    padding = maxlen - len(stripped)
+    return s + ' '*padding
+
+
+def build_menu(
+        cons: console.Console,
+        wordlist: list[str],
+        start: int,
+        use_brackets: bool,
+        sort_in_column: bool,
+) -> tuple[list[str], int]:
+    if use_brackets:
+        item = "[ %s ]"
+        padding = 4
+    else:
+        item = "%s  "
+        padding = 2
+    maxlen = min(max(map(real_len, wordlist)), cons.width - padding)
+    cols = int(cons.width / (maxlen + padding))
+    rows = int((len(wordlist) - 1)/cols + 1)
+
+    if sort_in_column:
+        # sort_in_column=False (default)     sort_in_column=True
+        #          A B C                       A D G
+        #          D E F                       B E
+        #          G                           C F
+        #
+        # "fill" the table with empty words, so we always have the same amount
+        # of rows for each column
+        missing = cols*rows - len(wordlist)
+        wordlist = wordlist + ['']*missing
+        indexes = [(i % cols) * rows + i // cols for i in range(len(wordlist))]
+        wordlist = [wordlist[i] for i in indexes]
+    menu = []
+    i = start
+    for r in range(rows):
+        row = []
+        for col in range(cols):
+            row.append(item % left_align(wordlist[i], maxlen))
+            i += 1
+            if i >= len(wordlist):
+                break
+        menu.append(''.join(row))
+        if i >= len(wordlist):
+            i = 0
+            break
+        if r + 5 > cons.height:
+            menu.append("   %d more... " % (len(wordlist) - i))
+            break
+    return menu, i
+
+# this gets somewhat user interface-y, and as a result the logic gets
+# very convoluted.
+#
+#  To summarise the summary of the summary:- people are a problem.
+#                  -- The Hitch-Hikers Guide to the Galaxy, Episode 12
+
+#### Desired behaviour of the completions commands.
+# the considerations are:
+# (1) how many completions are possible
+# (2) whether the last command was a completion
+# (3) if we can assume that the completer is going to return the same set of
+#     completions: this is controlled by the ``assume_immutable_completions``
+#     variable on the reader, which is True by default to match the historical
+#     behaviour of pyrepl, but e.g. False in the ReadlineAlikeReader to match
+#     more closely readline's semantics (this is needed e.g. by
+#     fancycompleter)
+#
+# if there's no possible completion, beep at the user and point this out.
+# this is easy.
+#
+# if there's only one possible completion, stick it in.  if the last thing
+# user did was a completion, point out that he isn't getting anywhere, but
+# only if the ``assume_immutable_completions`` is True.
+#
+# now it gets complicated.
+#
+# for the first press of a completion key:
+#  if there's a common prefix, stick it in.
+
+#  irrespective of whether anything got stuck in, if the word is now
+#  complete, show the "complete but not unique" message
+
+#  if there's no common prefix and if the word is not now complete,
+#  beep.
+
+#        common prefix ->    yes          no
+#        word complete \/
+#            yes           "cbnu"      "cbnu"
+#            no              -          beep
+
+# for the second bang on the completion key
+#  there will necessarily be no common prefix
+#  show a menu of the choices.
+
+# for subsequent bangs, rotate the menu around (if there are sufficient
+# choices).
+
+
+class complete(commands.Command):
+    def do(self) -> None:
+        r: CompletingReader
+        r = self.reader  # type: ignore[assignment]
+        last_is_completer = r.last_command_is(self.__class__)
+        immutable_completions = r.assume_immutable_completions
+        completions_unchangable = last_is_completer and immutable_completions
+        stem = r.get_stem()
+        if not completions_unchangable:
+            r.cmpltn_menu_choices = r.get_completions(stem)
+
+        completions = r.cmpltn_menu_choices
+        if not completions:
+            r.error("no matches")
+        elif len(completions) == 1:
+            if completions_unchangable and len(completions[0]) == len(stem):
+                r.msg = "[ sole completion ]"
+                r.dirty = True
+            r.insert(completions[0][len(stem):])
+        else:
+            p = prefix(completions, len(stem))
+            if p:
+                r.insert(p)
+            if last_is_completer:
+                r.cmpltn_menu_visible = True
+                r.cmpltn_message_visible = False
+                r.cmpltn_menu, r.cmpltn_menu_end = build_menu(
+                    r.console, completions, r.cmpltn_menu_end,
+                    r.use_brackets, r.sort_in_column)
+                r.dirty = True
+            elif not r.cmpltn_menu_visible:
+                r.cmpltn_message_visible = True
+                if stem + p in completions:
+                    r.msg = "[ complete but not unique ]"
+                    r.dirty = True
+                else:
+                    r.msg = "[ not unique ]"
+                    r.dirty = True
+
+
+class self_insert(commands.self_insert):
+    def do(self) -> None:
+        r: CompletingReader
+        r = self.reader  # type: ignore[assignment]
+
+        commands.self_insert.do(self)
+        if r.cmpltn_menu_visible:
+            stem = r.get_stem()
+            if len(stem) < 1:
+                r.cmpltn_reset()
+            else:
+                completions = [w for w in r.cmpltn_menu_choices
+                               if w.startswith(stem)]
+                if completions:
+                    r.cmpltn_menu, r.cmpltn_menu_end = build_menu(
+                        r.console, completions, 0,
+                        r.use_brackets, r.sort_in_column)
+                else:
+                    r.cmpltn_reset()
+
+
+@dataclass
+class CompletingReader(Reader):
+    """Adds completion support"""
+
+    ### Class variables
+    # see the comment for the complete command
+    assume_immutable_completions = True
+    use_brackets = True  # display completions inside []
+    sort_in_column = False
+
+    ### Instance variables
+    cmpltn_menu: list[str] = field(init=False)
+    cmpltn_menu_visible: bool = field(init=False)
+    cmpltn_message_visible: bool = field(init=False)
+    cmpltn_menu_end: int = field(init=False)
+    cmpltn_menu_choices: list[str] = field(init=False)
+
+    def __post_init__(self) -> None:
+        super().__post_init__()
+        self.cmpltn_reset()
+        for c in (complete, self_insert):
+            self.commands[c.__name__] = c
+            self.commands[c.__name__.replace('_', '-')] = c
+
+    def collect_keymap(self) -> tuple[tuple[KeySpec, CommandName], ...]:
+        return super().collect_keymap() + (
+            (r'\t', 'complete'),)
+
+    def after_command(self, cmd: Command) -> None:
+        super().after_command(cmd)
+        if not isinstance(cmd, (complete, self_insert)):
+            self.cmpltn_reset()
+
+    def calc_screen(self) -> list[str]:
+        screen = super().calc_screen()
+        if self.cmpltn_menu_visible:
+            # We display the completions menu below the current prompt
+            ly = self.lxy[1] + 1
+            screen[ly:ly] = self.cmpltn_menu
+            # If we're not in the middle of multiline edit, don't append to screeninfo
+            # since that screws up the position calculation in pos2xy function.
+            # This is a hack to prevent the cursor jumping
+            # into the completions menu when pressing left or down arrow.
+            if self.pos != len(self.buffer):
+                self.screeninfo[ly:ly] = [(0, [])]*len(self.cmpltn_menu)
+        return screen
+
+    def finish(self) -> None:
+        super().finish()
+        self.cmpltn_reset()
+
+    def cmpltn_reset(self) -> None:
+        self.cmpltn_menu = []
+        self.cmpltn_menu_visible = False
+        self.cmpltn_message_visible = False
+        self.cmpltn_menu_end = 0
+        self.cmpltn_menu_choices = []
+
+    def get_stem(self) -> str:
+        st = self.syntax_table
+        SW = reader.SYNTAX_WORD
+        b = self.buffer
+        p = self.pos - 1
+        while p >= 0 and st.get(b[p], SW) == SW:
+            p -= 1
+        return ''.join(b[p+1:self.pos])
+
+    def get_completions(self, stem: str) -> list[str]:
+        return []
+
+    def get_line(self) -> str:
+        """Return the current line until the cursor position."""
+        return ''.join(self.buffer[:self.pos])
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/console.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/console.py
new file mode 100644
index 0000000000000000000000000000000000000000..8956fb1242e52a46c02e5dcf53315427fd59cddf
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/console.py
@@ -0,0 +1,229 @@
+#   Copyright 2000-2004 Michael Hudson-Doyle <micahel@gmail.com>
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+import _colorize
+
+from abc import ABC, abstractmethod
+import ast
+import code
+import linecache
+from dataclasses import dataclass, field
+import os.path
+import sys
+
+
+TYPE_CHECKING = False
+
+if TYPE_CHECKING:
+    from typing import IO
+    from typing import Callable
+
+
+@dataclass
+class Event:
+    evt: str
+    data: str
+    raw: bytes = b""
+
+
+@dataclass
+class Console(ABC):
+    posxy: tuple[int, int]
+    screen: list[str] = field(default_factory=list)
+    height: int = 25
+    width: int = 80
+
+    def __init__(
+        self,
+        f_in: IO[bytes] | int = 0,
+        f_out: IO[bytes] | int = 1,
+        term: str = "",
+        encoding: str = "",
+    ):
+        self.encoding = encoding or sys.getdefaultencoding()
+
+        if isinstance(f_in, int):
+            self.input_fd = f_in
+        else:
+            self.input_fd = f_in.fileno()
+
+        if isinstance(f_out, int):
+            self.output_fd = f_out
+        else:
+            self.output_fd = f_out.fileno()
+
+    @abstractmethod
+    def refresh(self, screen: list[str], xy: tuple[int, int]) -> None: ...
+
+    @abstractmethod
+    def prepare(self) -> None: ...
+
+    @abstractmethod
+    def restore(self) -> None: ...
+
+    @abstractmethod
+    def move_cursor(self, x: int, y: int) -> None: ...
+
+    @abstractmethod
+    def set_cursor_vis(self, visible: bool) -> None: ...
+
+    @abstractmethod
+    def getheightwidth(self) -> tuple[int, int]:
+        """Return (height, width) where height and width are the height
+        and width of the terminal window in characters."""
+        ...
+
+    @abstractmethod
+    def get_event(self, block: bool = True) -> Event | None:
+        """Return an Event instance.  Returns None if |block| is false
+        and there is no event pending, otherwise waits for the
+        completion of an event."""
+        ...
+
+    @abstractmethod
+    def push_char(self, char: int | bytes) -> None:
+        """
+        Push a character to the console event queue.
+        """
+        ...
+
+    @abstractmethod
+    def beep(self) -> None: ...
+
+    @abstractmethod
+    def clear(self) -> None:
+        """Wipe the screen"""
+        ...
+
+    @abstractmethod
+    def finish(self) -> None:
+        """Move the cursor to the end of the display and otherwise get
+        ready for end.  XXX could be merged with restore?  Hmm."""
+        ...
+
+    @abstractmethod
+    def flushoutput(self) -> None:
+        """Flush all output to the screen (assuming there's some
+        buffering going on somewhere)."""
+        ...
+
+    @abstractmethod
+    def forgetinput(self) -> None:
+        """Forget all pending, but not yet processed input."""
+        ...
+
+    @abstractmethod
+    def getpending(self) -> Event:
+        """Return the characters that have been typed but not yet
+        processed."""
+        ...
+
+    @abstractmethod
+    def wait(self, timeout: float | None) -> bool:
+        """Wait for an event. The return value is True if an event is
+        available, False if the timeout has been reached. If timeout is
+        None, wait forever. The timeout is in milliseconds."""
+        ...
+
+    @property
+    def input_hook(self) -> Callable[[], int] | None:
+        """Returns the current input hook."""
+        ...
+
+    @abstractmethod
+    def repaint(self) -> None: ...
+
+
+class InteractiveColoredConsole(code.InteractiveConsole):
+    STATEMENT_FAILED = object()
+
+    def __init__(
+        self,
+        locals: dict[str, object] | None = None,
+        filename: str = "<console>",
+        *,
+        local_exit: bool = False,
+    ) -> None:
+        super().__init__(locals=locals, filename=filename, local_exit=local_exit)
+        self.can_colorize = _colorize.can_colorize()
+
+    def showsyntaxerror(self, filename=None, **kwargs):
+        super().showsyntaxerror(filename=filename, **kwargs)
+
+    def _excepthook(self, typ, value, tb):
+        import traceback
+        lines = traceback.format_exception(
+                typ, value, tb,
+                colorize=self.can_colorize,
+                limit=traceback.BUILTIN_EXCEPTION_LIMIT)
+        self.write(''.join(lines))
+
+    def runcode(self, code):
+        try:
+            exec(code, self.locals)
+        except SystemExit:
+            raise
+        except BaseException:
+            self.showtraceback()
+            return self.STATEMENT_FAILED
+        return None
+
+    def runsource(self, source, filename="<input>", symbol="single"):
+        try:
+            tree = self.compile.compiler(
+                source,
+                filename,
+                "exec",
+                ast.PyCF_ONLY_AST,
+                incomplete_input=False,
+            )
+        except (SyntaxError, OverflowError, ValueError):
+            self.showsyntaxerror(filename, source=source)
+            return False
+        if tree.body:
+            *_, last_stmt = tree.body
+        for stmt in tree.body:
+            wrapper = ast.Interactive if stmt is last_stmt else ast.Module
+            the_symbol = symbol if stmt is last_stmt else "exec"
+            item = wrapper([stmt])
+            try:
+                code = self.compile.compiler(item, filename, the_symbol)
+                linecache._register_code(code, source, filename)
+            except SyntaxError as e:
+                if e.args[0] == "'await' outside function":
+                    python = os.path.basename(sys.executable)
+                    e.add_note(
+                        f"Try the asyncio REPL ({python} -m asyncio) to use"
+                        f" top-level 'await' and run background asyncio tasks."
+                    )
+                self.showsyntaxerror(filename, source=source)
+                return False
+            except (OverflowError, ValueError):
+                self.showsyntaxerror(filename, source=source)
+                return False
+
+            if code is None:
+                return True
+
+            result = self.runcode(code)
+            if result is self.STATEMENT_FAILED:
+                break
+        return False
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/fancy_termios.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/fancy_termios.py
new file mode 100644
index 0000000000000000000000000000000000000000..8d5bd183f21339805f72054f820b5fcb595e1f5a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/fancy_termios.py
@@ -0,0 +1,82 @@
+#   Copyright 2000-2004 Michael Hudson-Doyle <micahel@gmail.com>
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+import termios
+
+
+TYPE_CHECKING = False
+
+if TYPE_CHECKING:
+    from typing import cast
+else:
+    cast = lambda typ, val: val
+
+
+class TermState:
+    def __init__(self, attrs: list[int | list[bytes]]) -> None:
+        self.iflag = cast(int, attrs[0])
+        self.oflag = cast(int, attrs[1])
+        self.cflag = cast(int, attrs[2])
+        self.lflag = cast(int, attrs[3])
+        self.ispeed = cast(int, attrs[4])
+        self.ospeed = cast(int, attrs[5])
+        self.cc = cast(list[bytes], attrs[6])
+
+    def as_list(self) -> list[int | list[bytes]]:
+        return [
+            self.iflag,
+            self.oflag,
+            self.cflag,
+            self.lflag,
+            self.ispeed,
+            self.ospeed,
+            # Always return a copy of the control characters list to ensure
+            # there are not any additional references to self.cc
+            self.cc[:],
+        ]
+
+    def copy(self) -> "TermState":
+        return self.__class__(self.as_list())
+
+
+def tcgetattr(fd: int) -> TermState:
+    return TermState(termios.tcgetattr(fd))
+
+
+def tcsetattr(fd: int, when: int, attrs: TermState) -> None:
+    termios.tcsetattr(fd, when, attrs.as_list())
+
+
+class Term(TermState):
+    TS__init__ = TermState.__init__
+
+    def __init__(self, fd: int = 0) -> None:
+        self.TS__init__(termios.tcgetattr(fd))
+        self.fd = fd
+        self.stack: list[list[int | list[bytes]]] = []
+
+    def save(self) -> None:
+        self.stack.append(self.as_list())
+
+    def set(self, when: int = termios.TCSANOW) -> None:
+        termios.tcsetattr(self.fd, when, self.as_list())
+
+    def restore(self) -> None:
+        self.TS__init__(self.stack.pop())
+        self.set()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/historical_reader.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/historical_reader.py
new file mode 100644
index 0000000000000000000000000000000000000000..c4b95fa2e81ee60317ad1ac1ef5544270945986c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/historical_reader.py
@@ -0,0 +1,419 @@
+#   Copyright 2000-2004 Michael Hudson-Doyle <micahel@gmail.com>
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+from contextlib import contextmanager
+from dataclasses import dataclass, field
+
+from . import commands, input
+from .reader import Reader
+
+
+if False:
+    from .types import SimpleContextManager, KeySpec, CommandName
+
+
+isearch_keymap: tuple[tuple[KeySpec, CommandName], ...] = tuple(
+    [("\\%03o" % c, "isearch-end") for c in range(256) if chr(c) != "\\"]
+    + [(c, "isearch-add-character") for c in map(chr, range(32, 127)) if c != "\\"]
+    + [
+        ("\\%03o" % c, "isearch-add-character")
+        for c in range(256)
+        if chr(c).isalpha() and chr(c) != "\\"
+    ]
+    + [
+        ("\\\\", "self-insert"),
+        (r"\C-r", "isearch-backwards"),
+        (r"\C-s", "isearch-forwards"),
+        (r"\C-c", "isearch-cancel"),
+        (r"\C-g", "isearch-cancel"),
+        (r"\<backspace>", "isearch-backspace"),
+    ]
+)
+
+ISEARCH_DIRECTION_NONE = ""
+ISEARCH_DIRECTION_BACKWARDS = "r"
+ISEARCH_DIRECTION_FORWARDS = "f"
+
+
+class next_history(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        if r.historyi == len(r.history):
+            r.error("end of history list")
+            return
+        r.select_item(r.historyi + 1)
+
+
+class previous_history(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        if r.historyi == 0:
+            r.error("start of history list")
+            return
+        r.select_item(r.historyi - 1)
+
+
+class history_search_backward(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.search_next(forwards=False)
+
+
+class history_search_forward(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.search_next(forwards=True)
+
+
+class restore_history(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        if r.historyi != len(r.history):
+            if r.get_unicode() != r.history[r.historyi]:
+                r.buffer = list(r.history[r.historyi])
+                r.pos = len(r.buffer)
+                r.dirty = True
+
+
+class first_history(commands.Command):
+    def do(self) -> None:
+        self.reader.select_item(0)
+
+
+class last_history(commands.Command):
+    def do(self) -> None:
+        self.reader.select_item(len(self.reader.history))
+
+
+class operate_and_get_next(commands.FinishCommand):
+    def do(self) -> None:
+        self.reader.next_history = self.reader.historyi + 1
+
+
+class yank_arg(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        if r.last_command is self.__class__:
+            r.yank_arg_i += 1
+        else:
+            r.yank_arg_i = 0
+        if r.historyi < r.yank_arg_i:
+            r.error("beginning of history list")
+            return
+        a = r.get_arg(-1)
+        # XXX how to split?
+        words = r.get_item(r.historyi - r.yank_arg_i - 1).split()
+        if a < -len(words) or a >= len(words):
+            r.error("no such arg")
+            return
+        w = words[a]
+        b = r.buffer
+        if r.yank_arg_i > 0:
+            o = len(r.yank_arg_yanked)
+        else:
+            o = 0
+        b[r.pos - o : r.pos] = list(w)
+        r.yank_arg_yanked = w
+        r.pos += len(w) - o
+        r.dirty = True
+
+
+class forward_history_isearch(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_FORWARDS
+        r.isearch_start = r.historyi, r.pos
+        r.isearch_term = ""
+        r.dirty = True
+        r.push_input_trans(r.isearch_trans)
+
+
+class reverse_history_isearch(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_BACKWARDS
+        r.dirty = True
+        r.isearch_term = ""
+        r.push_input_trans(r.isearch_trans)
+        r.isearch_start = r.historyi, r.pos
+
+
+class isearch_cancel(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_NONE
+        r.pop_input_trans()
+        r.select_item(r.isearch_start[0])
+        r.pos = r.isearch_start[1]
+        r.dirty = True
+
+
+class isearch_add_character(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        r.isearch_term += self.event[-1]
+        r.dirty = True
+        p = r.pos + len(r.isearch_term) - 1
+        if b[p : p + 1] != [r.isearch_term[-1]]:
+            r.isearch_next()
+
+
+class isearch_backspace(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        if len(r.isearch_term) > 0:
+            r.isearch_term = r.isearch_term[:-1]
+            r.dirty = True
+        else:
+            r.error("nothing to rubout")
+
+
+class isearch_forwards(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_FORWARDS
+        r.isearch_next()
+
+
+class isearch_backwards(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_BACKWARDS
+        r.isearch_next()
+
+
+class isearch_end(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        r.isearch_direction = ISEARCH_DIRECTION_NONE
+        r.console.forgetinput()
+        r.pop_input_trans()
+        r.dirty = True
+
+
+@dataclass
+class HistoricalReader(Reader):
+    """Adds history support (with incremental history searching) to the
+    Reader class.
+    """
+
+    history: list[str] = field(default_factory=list)
+    historyi: int = 0
+    next_history: int | None = None
+    transient_history: dict[int, str] = field(default_factory=dict)
+    isearch_term: str = ""
+    isearch_direction: str = ISEARCH_DIRECTION_NONE
+    isearch_start: tuple[int, int] = field(init=False)
+    isearch_trans: input.KeymapTranslator = field(init=False)
+    yank_arg_i: int = 0
+    yank_arg_yanked: str = ""
+
+    def __post_init__(self) -> None:
+        super().__post_init__()
+        for c in [
+            next_history,
+            previous_history,
+            restore_history,
+            first_history,
+            last_history,
+            yank_arg,
+            forward_history_isearch,
+            reverse_history_isearch,
+            isearch_end,
+            isearch_add_character,
+            isearch_cancel,
+            isearch_add_character,
+            isearch_backspace,
+            isearch_forwards,
+            isearch_backwards,
+            operate_and_get_next,
+            history_search_backward,
+            history_search_forward,
+        ]:
+            self.commands[c.__name__] = c
+            self.commands[c.__name__.replace("_", "-")] = c
+        self.isearch_start = self.historyi, self.pos
+        self.isearch_trans = input.KeymapTranslator(
+            isearch_keymap, invalid_cls=isearch_end, character_cls=isearch_add_character
+        )
+
+    def collect_keymap(self) -> tuple[tuple[KeySpec, CommandName], ...]:
+        return super().collect_keymap() + (
+            (r"\C-n", "next-history"),
+            (r"\C-p", "previous-history"),
+            (r"\C-o", "operate-and-get-next"),
+            (r"\C-r", "reverse-history-isearch"),
+            (r"\C-s", "forward-history-isearch"),
+            (r"\M-r", "restore-history"),
+            (r"\M-.", "yank-arg"),
+            (r"\<page down>", "history-search-forward"),
+            (r"\x1b[6~", "history-search-forward"),
+            (r"\<page up>", "history-search-backward"),
+            (r"\x1b[5~", "history-search-backward"),
+        )
+
+    def select_item(self, i: int) -> None:
+        self.transient_history[self.historyi] = self.get_unicode()
+        buf = self.transient_history.get(i)
+        if buf is None:
+            buf = self.history[i].rstrip()
+        self.buffer = list(buf)
+        self.historyi = i
+        self.pos = len(self.buffer)
+        self.dirty = True
+        self.last_refresh_cache.invalidated = True
+
+    def get_item(self, i: int) -> str:
+        if i != len(self.history):
+            return self.transient_history.get(i, self.history[i])
+        else:
+            return self.transient_history.get(i, self.get_unicode())
+
+    @contextmanager
+    def suspend(self) -> SimpleContextManager:
+        with super().suspend(), self.suspend_history():
+            yield
+
+    @contextmanager
+    def suspend_history(self) -> SimpleContextManager:
+        try:
+            old_history = self.history[:]
+            del self.history[:]
+            yield
+        finally:
+            self.history[:] = old_history
+
+    def prepare(self) -> None:
+        super().prepare()
+        try:
+            self.transient_history = {}
+            if self.next_history is not None and self.next_history < len(self.history):
+                self.historyi = self.next_history
+                self.buffer[:] = list(self.history[self.next_history])
+                self.pos = len(self.buffer)
+                self.transient_history[len(self.history)] = ""
+            else:
+                self.historyi = len(self.history)
+            self.next_history = None
+        except:
+            self.restore()
+            raise
+
+    def get_prompt(self, lineno: int, cursor_on_line: bool) -> str:
+        if cursor_on_line and self.isearch_direction != ISEARCH_DIRECTION_NONE:
+            d = "rf"[self.isearch_direction == ISEARCH_DIRECTION_FORWARDS]
+            return "(%s-search `%s') " % (d, self.isearch_term)
+        else:
+            return super().get_prompt(lineno, cursor_on_line)
+
+    def search_next(self, *, forwards: bool) -> None:
+        """Search history for the current line contents up to the cursor.
+
+        Selects the first item found. If nothing is under the cursor, any next
+        item in history is selected.
+        """
+        pos = self.pos
+        s = self.get_unicode()
+        history_index = self.historyi
+
+        # In multiline contexts, we're only interested in the current line.
+        nl_index = s.rfind('\n', 0, pos)
+        prefix = s[nl_index + 1:pos]
+        pos = len(prefix)
+
+        match_prefix = len(prefix)
+        len_item = 0
+        if history_index < len(self.history):
+            len_item = len(self.get_item(history_index))
+        if len_item and pos == len_item:
+            match_prefix = False
+        elif not pos:
+            match_prefix = False
+
+        while 1:
+            if forwards:
+                out_of_bounds = history_index >= len(self.history) - 1
+            else:
+                out_of_bounds = history_index == 0
+            if out_of_bounds:
+                if forwards and not match_prefix:
+                    self.pos = 0
+                    self.buffer = []
+                    self.dirty = True
+                else:
+                    self.error("not found")
+                return
+
+            history_index += 1 if forwards else -1
+            s = self.get_item(history_index)
+
+            if not match_prefix:
+                self.select_item(history_index)
+                return
+
+            len_acc = 0
+            for i, line in enumerate(s.splitlines(keepends=True)):
+                if line.startswith(prefix):
+                    self.select_item(history_index)
+                    self.pos = pos + len_acc
+                    return
+                len_acc += len(line)
+
+    def isearch_next(self) -> None:
+        st = self.isearch_term
+        p = self.pos
+        i = self.historyi
+        s = self.get_unicode()
+        forwards = self.isearch_direction == ISEARCH_DIRECTION_FORWARDS
+        while 1:
+            if forwards:
+                p = s.find(st, p + 1)
+            else:
+                p = s.rfind(st, 0, p + len(st) - 1)
+            if p != -1:
+                self.select_item(i)
+                self.pos = p
+                return
+            elif (forwards and i >= len(self.history) - 1) or (not forwards and i == 0):
+                self.error("not found")
+                return
+            else:
+                if forwards:
+                    i += 1
+                    s = self.get_item(i)
+                    p = -1
+                else:
+                    i -= 1
+                    s = self.get_item(i)
+                    p = len(s)
+
+    def finish(self) -> None:
+        super().finish()
+        ret = self.get_unicode()
+        for i, t in self.transient_history.items():
+            if i < len(self.history) and i != self.historyi:
+                self.history[i] = t
+        if ret and should_auto_add_history:
+            self.history.append(ret)
+
+
+should_auto_add_history = True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/input.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/input.py
new file mode 100644
index 0000000000000000000000000000000000000000..21c24eb5cde3e36459506f23f6e29e90472a5f92
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/input.py
@@ -0,0 +1,114 @@
+#   Copyright 2000-2004 Michael Hudson-Doyle <micahel@gmail.com>
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+# (naming modules after builtin functions is not such a hot idea...)
+
+# an KeyTrans instance translates Event objects into Command objects
+
+# hmm, at what level do we want [C-i] and [tab] to be equivalent?
+# [meta-a] and [esc a]?  obviously, these are going to be equivalent
+# for the UnixConsole, but should they be for PygameConsole?
+
+# it would in any situation seem to be a bad idea to bind, say, [tab]
+# and [C-i] to *different* things... but should binding one bind the
+# other?
+
+# executive, temporary decision: [tab] and [C-i] are distinct, but
+# [meta-key] is identified with [esc key].  We demand that any console
+# class does quite a lot towards emulating a unix terminal.
+
+from __future__ import annotations
+
+from abc import ABC, abstractmethod
+import unicodedata
+from collections import deque
+
+
+# types
+if False:
+    from .types import EventTuple
+
+
+class InputTranslator(ABC):
+    @abstractmethod
+    def push(self, evt: EventTuple) -> None:
+        pass
+
+    @abstractmethod
+    def get(self) -> EventTuple | None:
+        return None
+
+    @abstractmethod
+    def empty(self) -> bool:
+        return True
+
+
+class KeymapTranslator(InputTranslator):
+    def __init__(self, keymap, verbose=False, invalid_cls=None, character_cls=None):
+        self.verbose = verbose
+        from .keymap import compile_keymap, parse_keys
+
+        self.keymap = keymap
+        self.invalid_cls = invalid_cls
+        self.character_cls = character_cls
+        d = {}
+        for keyspec, command in keymap:
+            keyseq = tuple(parse_keys(keyspec))
+            d[keyseq] = command
+        if self.verbose:
+            print(d)
+        self.k = self.ck = compile_keymap(d, ())
+        self.results = deque()
+        self.stack = []
+
+    def push(self, evt):
+        if self.verbose:
+            print("pushed", evt.data, end="")
+        key = evt.data
+        d = self.k.get(key)
+        if isinstance(d, dict):
+            if self.verbose:
+                print("transition")
+            self.stack.append(key)
+            self.k = d
+        else:
+            if d is None:
+                if self.verbose:
+                    print("invalid")
+                if self.stack or len(key) > 1 or unicodedata.category(key) == "C":
+                    self.results.append((self.invalid_cls, self.stack + [key]))
+                else:
+                    # small optimization:
+                    self.k[key] = self.character_cls
+                    self.results.append((self.character_cls, [key]))
+            else:
+                if self.verbose:
+                    print("matched", d)
+                self.results.append((d, self.stack + [key]))
+            self.stack = []
+            self.k = self.ck
+
+    def get(self):
+        if self.results:
+            return self.results.popleft()
+        else:
+            return None
+
+    def empty(self) -> bool:
+        return not self.results
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/keymap.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/keymap.py
new file mode 100644
index 0000000000000000000000000000000000000000..d11df4b5164696e56273284f5621ae0cfed0b3ba
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/keymap.py
@@ -0,0 +1,213 @@
+#   Copyright 2000-2008 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""
+Keymap contains functions for parsing keyspecs and turning keyspecs into
+appropriate sequences.
+
+A keyspec is a string representing a sequence of key presses that can
+be bound to a command. All characters other than the backslash represent
+themselves. In the traditional manner, a backslash introduces an escape
+sequence.
+
+pyrepl uses its own keyspec format that is meant to be a strict superset of
+readline's KEYSEQ format. This means that if a spec is found that readline
+accepts that this doesn't, it should be logged as a bug. Note that this means
+we're using the '\\C-o' style of readline's keyspec, not the 'Control-o' sort.
+
+The extension to readline is that the sequence \\<KEY> denotes the
+sequence of characters produced by hitting KEY.
+
+Examples:
+'a'      - what you get when you hit the 'a' key
+'\\EOA'  - Escape - O - A (up, on my terminal)
+'\\<UP>' - the up arrow key
+'\\<up>' - ditto (keynames are case-insensitive)
+'\\C-o', '\\c-o'  - control-o
+'\\M-.'  - meta-period
+'\\E.'   - ditto (that's how meta works for pyrepl)
+'\\<tab>', '\\<TAB>', '\\t', '\\011', '\\x09', '\\X09', '\\C-i', '\\C-I'
+   - all of these are the tab character.
+"""
+
+_escapes = {
+    "\\": "\\",
+    "'": "'",
+    '"': '"',
+    "a": "\a",
+    "b": "\b",
+    "e": "\033",
+    "f": "\f",
+    "n": "\n",
+    "r": "\r",
+    "t": "\t",
+    "v": "\v",
+}
+
+_keynames = {
+    "backspace": "backspace",
+    "delete": "delete",
+    "down": "down",
+    "end": "end",
+    "enter": "\r",
+    "escape": "\033",
+    "f1": "f1",
+    "f2": "f2",
+    "f3": "f3",
+    "f4": "f4",
+    "f5": "f5",
+    "f6": "f6",
+    "f7": "f7",
+    "f8": "f8",
+    "f9": "f9",
+    "f10": "f10",
+    "f11": "f11",
+    "f12": "f12",
+    "f13": "f13",
+    "f14": "f14",
+    "f15": "f15",
+    "f16": "f16",
+    "f17": "f17",
+    "f18": "f18",
+    "f19": "f19",
+    "f20": "f20",
+    "home": "home",
+    "insert": "insert",
+    "left": "left",
+    "page down": "page down",
+    "page up": "page up",
+    "return": "\r",
+    "right": "right",
+    "space": " ",
+    "tab": "\t",
+    "up": "up",
+}
+
+
+class KeySpecError(Exception):
+    pass
+
+
+def parse_keys(keys: str) -> list[str]:
+    """Parse keys in keyspec format to a sequence of keys."""
+    s = 0
+    r: list[str] = []
+    while s < len(keys):
+        k, s = _parse_single_key_sequence(keys, s)
+        r.extend(k)
+    return r
+
+
+def _parse_single_key_sequence(key: str, s: int) -> tuple[list[str], int]:
+    ctrl = 0
+    meta = 0
+    ret = ""
+    while not ret and s < len(key):
+        if key[s] == "\\":
+            c = key[s + 1].lower()
+            if c in _escapes:
+                ret = _escapes[c]
+                s += 2
+            elif c == "c":
+                if key[s + 2] != "-":
+                    raise KeySpecError(
+                        "\\C must be followed by `-' (char %d of %s)"
+                        % (s + 2, repr(key))
+                    )
+                if ctrl:
+                    raise KeySpecError(
+                        "doubled \\C- (char %d of %s)" % (s + 1, repr(key))
+                    )
+                ctrl = 1
+                s += 3
+            elif c == "m":
+                if key[s + 2] != "-":
+                    raise KeySpecError(
+                        "\\M must be followed by `-' (char %d of %s)"
+                        % (s + 2, repr(key))
+                    )
+                if meta:
+                    raise KeySpecError(
+                        "doubled \\M- (char %d of %s)" % (s + 1, repr(key))
+                    )
+                meta = 1
+                s += 3
+            elif c.isdigit():
+                n = key[s + 1 : s + 4]
+                ret = chr(int(n, 8))
+                s += 4
+            elif c == "x":
+                n = key[s + 2 : s + 4]
+                ret = chr(int(n, 16))
+                s += 4
+            elif c == "<":
+                t = key.find(">", s)
+                if t == -1:
+                    raise KeySpecError(
+                        "unterminated \\< starting at char %d of %s"
+                        % (s + 1, repr(key))
+                    )
+                ret = key[s + 2 : t].lower()
+                if ret not in _keynames:
+                    raise KeySpecError(
+                        "unrecognised keyname `%s' at char %d of %s"
+                        % (ret, s + 2, repr(key))
+                    )
+                ret = _keynames[ret]
+                s = t + 1
+            else:
+                raise KeySpecError(
+                    "unknown backslash escape %s at char %d of %s"
+                    % (repr(c), s + 2, repr(key))
+                )
+        else:
+            ret = key[s]
+            s += 1
+    if ctrl:
+        if len(ret) == 1:
+            ret = chr(ord(ret) & 0x1F)  # curses.ascii.ctrl()
+        elif ret in {"left", "right"}:
+            ret = f"ctrl {ret}"
+        else:
+            raise KeySpecError("\\C- followed by invalid key")
+
+    result = [ret], s
+    if meta:
+        result[0].insert(0, "\033")
+    return result
+
+
+def compile_keymap(keymap, empty=b""):
+    r = {}
+    for key, value in keymap.items():
+        if isinstance(key, bytes):
+            first = key[:1]
+        else:
+            first = key[0]
+        r.setdefault(first, {})[key[1:]] = value
+    for key, value in r.items():
+        if empty in value:
+            if len(value) != 1:
+                raise KeySpecError("key definitions for %s clash" % (value.values(),))
+            else:
+                r[key] = value[empty]
+        else:
+            r[key] = compile_keymap(value, empty)
+    return r
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/main.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/main.py
new file mode 100644
index 0000000000000000000000000000000000000000..447eb1e551e7743c42efbfffead65f3d47a59252
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/main.py
@@ -0,0 +1,58 @@
+import errno
+import os
+import sys
+import types
+
+
+CAN_USE_PYREPL: bool
+FAIL_REASON: str
+try:
+    if sys.platform == "win32" and sys.getwindowsversion().build < 10586:
+        raise RuntimeError("Windows 10 TH2 or later required")
+    if not os.isatty(sys.stdin.fileno()):
+        raise OSError(errno.ENOTTY, "tty required", "stdin")
+    from .simple_interact import check
+    if err := check():
+        raise RuntimeError(err)
+except Exception as e:
+    CAN_USE_PYREPL = False
+    FAIL_REASON = f"warning: can't use pyrepl: {e}"
+else:
+    CAN_USE_PYREPL = True
+    FAIL_REASON = ""
+
+
+def interactive_console(mainmodule=None, quiet=False, pythonstartup=False):
+    if not CAN_USE_PYREPL:
+        if not os.getenv('PYTHON_BASIC_REPL') and FAIL_REASON:
+            from .trace import trace
+            trace(FAIL_REASON)
+            print(FAIL_REASON, file=sys.stderr)
+        return sys._baserepl()
+
+    if not mainmodule:
+        mainmodule = types.ModuleType("__main__")
+
+    namespace = mainmodule.__dict__
+
+    # sys._baserepl() above does this internally, we do it here
+    startup_path = os.getenv("PYTHONSTARTUP")
+    if pythonstartup and startup_path:
+        sys.audit("cpython.run_startup", startup_path)
+
+        import tokenize
+        with tokenize.open(startup_path) as f:
+            startup_code = compile(f.read(), startup_path, "exec")
+            exec(startup_code, namespace)
+
+    # set sys.{ps1,ps2} just before invoking the interactive interpreter. This
+    # mimics what CPython does in pythonrun.c
+    if not hasattr(sys, "ps1"):
+        sys.ps1 = ">>> "
+    if not hasattr(sys, "ps2"):
+        sys.ps2 = "... "
+
+    from .console import InteractiveColoredConsole
+    from .simple_interact import run_multiline_interactive_console
+    console = InteractiveColoredConsole(namespace, filename="<stdin>")
+    run_multiline_interactive_console(console)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/mypy.ini b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/mypy.ini
new file mode 100644
index 0000000000000000000000000000000000000000..9375a55b53ce8bcf84757d69982d7616718dd03e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/mypy.ini
@@ -0,0 +1,25 @@
+# Config file for running mypy on _pyrepl.
+# Run mypy by invoking `mypy --config-file Lib/_pyrepl/mypy.ini`
+# on the command-line from the repo root
+
+[mypy]
+files = Lib/_pyrepl
+mypy_path = $MYPY_CONFIG_FILE_DIR/../../Misc/mypy
+explicit_package_bases = True
+python_version = 3.13
+platform = linux
+pretty = True
+
+# Enable most stricter settings
+enable_error_code = ignore-without-code,redundant-expr
+strict = True
+
+# Various stricter settings that we can't yet enable
+# Try to enable these in the following order:
+disallow_untyped_calls = False
+disallow_untyped_defs = False
+check_untyped_defs = False
+
+# Various internal modules that typeshed deliberately doesn't have stubs for:
+[mypy-_abc.*,_opcode.*,_overlapped.*,_testcapi.*,_testinternalcapi.*,test.*]
+ignore_missing_imports = True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/pager.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/pager.py
new file mode 100644
index 0000000000000000000000000000000000000000..1fddc63e3ee3ad0c73a62ca31a5ea1cd3631266d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/pager.py
@@ -0,0 +1,175 @@
+from __future__ import annotations
+
+import io
+import os
+import re
+import sys
+
+
+# types
+if False:
+    from typing import Protocol
+    class Pager(Protocol):
+        def __call__(self, text: str, title: str = "") -> None:
+            ...
+
+
+def get_pager() -> Pager:
+    """Decide what method to use for paging through text."""
+    if not hasattr(sys.stdin, "isatty"):
+        return plain_pager
+    if not hasattr(sys.stdout, "isatty"):
+        return plain_pager
+    if not sys.stdin.isatty() or not sys.stdout.isatty():
+        return plain_pager
+    if sys.platform == "emscripten":
+        return plain_pager
+    use_pager = os.environ.get('MANPAGER') or os.environ.get('PAGER')
+    if use_pager:
+        if sys.platform == 'win32': # pipes completely broken in Windows
+            return lambda text, title='': tempfile_pager(plain(text), use_pager)
+        elif os.environ.get('TERM') in ('dumb', 'emacs'):
+            return lambda text, title='': pipe_pager(plain(text), use_pager, title)
+        else:
+            return lambda text, title='': pipe_pager(text, use_pager, title)
+    if os.environ.get('TERM') in ('dumb', 'emacs'):
+        return plain_pager
+    if sys.platform == 'win32':
+        return lambda text, title='': tempfile_pager(plain(text), 'more <')
+    if hasattr(os, 'system') and os.system('(pager) 2>/dev/null') == 0:
+        return lambda text, title='': pipe_pager(text, 'pager', title)
+    if hasattr(os, 'system') and os.system('(less) 2>/dev/null') == 0:
+        return lambda text, title='': pipe_pager(text, 'less', title)
+
+    import tempfile
+    (fd, filename) = tempfile.mkstemp()
+    os.close(fd)
+    try:
+        if hasattr(os, 'system') and os.system('more "%s"' % filename) == 0:
+            return lambda text, title='': pipe_pager(text, 'more', title)
+        else:
+            return tty_pager
+    finally:
+        os.unlink(filename)
+
+
+def escape_stdout(text: str) -> str:
+    # Escape non-encodable characters to avoid encoding errors later
+    encoding = getattr(sys.stdout, 'encoding', None) or 'utf-8'
+    return text.encode(encoding, 'backslashreplace').decode(encoding)
+
+
+def escape_less(s: str) -> str:
+    return re.sub(r'([?:.%\\])', r'\\\1', s)
+
+
+def plain(text: str) -> str:
+    """Remove boldface formatting from text."""
+    return re.sub('.\b', '', text)
+
+
+def tty_pager(text: str, title: str = '') -> None:
+    """Page through text on a text terminal."""
+    lines = plain(escape_stdout(text)).split('\n')
+    has_tty = False
+    try:
+        import tty
+        import termios
+        fd = sys.stdin.fileno()
+        old = termios.tcgetattr(fd)
+        tty.setcbreak(fd)
+        has_tty = True
+
+        def getchar() -> str:
+            return sys.stdin.read(1)
+
+    except (ImportError, AttributeError, io.UnsupportedOperation):
+        def getchar() -> str:
+            return sys.stdin.readline()[:-1][:1]
+
+    try:
+        try:
+            h = int(os.environ.get('LINES', 0))
+        except ValueError:
+            h = 0
+        if h <= 1:
+            h = 25
+        r = inc = h - 1
+        sys.stdout.write('\n'.join(lines[:inc]) + '\n')
+        while lines[r:]:
+            sys.stdout.write('-- more --')
+            sys.stdout.flush()
+            c = getchar()
+
+            if c in ('q', 'Q'):
+                sys.stdout.write('\r          \r')
+                break
+            elif c in ('\r', '\n'):
+                sys.stdout.write('\r          \r' + lines[r] + '\n')
+                r = r + 1
+                continue
+            if c in ('b', 'B', '\x1b'):
+                r = r - inc - inc
+                if r < 0: r = 0
+            sys.stdout.write('\n' + '\n'.join(lines[r:r+inc]) + '\n')
+            r = r + inc
+
+    finally:
+        if has_tty:
+            termios.tcsetattr(fd, termios.TCSAFLUSH, old)
+
+
+def plain_pager(text: str, title: str = '') -> None:
+    """Simply print unformatted text.  This is the ultimate fallback."""
+    sys.stdout.write(plain(escape_stdout(text)))
+
+
+def pipe_pager(text: str, cmd: str, title: str = '') -> None:
+    """Page through text by feeding it to another program."""
+    import subprocess
+    env = os.environ.copy()
+    if title:
+        title += ' '
+    esc_title = escape_less(title)
+    prompt_string = (
+        f' {esc_title}' +
+        '?ltline %lt?L/%L.'
+        ':byte %bB?s/%s.'
+        '.'
+        '?e (END):?pB %pB\\%..'
+        ' (press h for help or q to quit)')
+    env['LESS'] = '-RmPm{0}$PM{0}$'.format(prompt_string)
+    proc = subprocess.Popen(cmd, shell=True, stdin=subprocess.PIPE,
+                            errors='backslashreplace', env=env)
+    assert proc.stdin is not None
+    try:
+        with proc.stdin as pipe:
+            try:
+                pipe.write(text)
+            except KeyboardInterrupt:
+                # We've hereby abandoned whatever text hasn't been written,
+                # but the pager is still in control of the terminal.
+                pass
+    except OSError:
+        pass # Ignore broken pipes caused by quitting the pager program.
+    while True:
+        try:
+            proc.wait()
+            break
+        except KeyboardInterrupt:
+            # Ignore ctl-c like the pager itself does.  Otherwise the pager is
+            # left running and the terminal is in raw mode and unusable.
+            pass
+
+
+def tempfile_pager(text: str, cmd: str, title: str = '') -> None:
+    """Page through text by invoking a program on a temporary file."""
+    import tempfile
+    with tempfile.TemporaryDirectory() as tempdir:
+        filename = os.path.join(tempdir, 'pydoc.out')
+        with open(filename, 'w', errors='backslashreplace',
+                  encoding=os.device_encoding(0) if
+                  sys.platform == 'win32' else None
+                  ) as file:
+            file.write(text)
+        os.system(cmd + ' "' + filename + '"')
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/reader.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/reader.py
new file mode 100644
index 0000000000000000000000000000000000000000..9ab92f64d1ef63dddc245c2887929cac201e8cfe
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/reader.py
@@ -0,0 +1,772 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Antonio Cuni
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+import sys
+import _colorize
+
+from contextlib import contextmanager
+from dataclasses import dataclass, field, fields
+
+from . import commands, console, input
+from .utils import wlen, unbracket, disp_str, gen_colors, THEME
+from .trace import trace
+
+
+# types
+Command = commands.Command
+from .types import Callback, SimpleContextManager, KeySpec, CommandName
+
+
+# syntax classes
+SYNTAX_WHITESPACE, SYNTAX_WORD, SYNTAX_SYMBOL = range(3)
+
+
+def make_default_syntax_table() -> dict[str, int]:
+    # XXX perhaps should use some unicodedata here?
+    st: dict[str, int] = {}
+    for c in map(chr, range(256)):
+        st[c] = SYNTAX_SYMBOL
+    for c in [a for a in map(chr, range(256)) if a.isalnum()]:
+        st[c] = SYNTAX_WORD
+    st["\n"] = st[" "] = SYNTAX_WHITESPACE
+    return st
+
+
+def make_default_commands() -> dict[CommandName, type[Command]]:
+    result: dict[CommandName, type[Command]] = {}
+    for v in vars(commands).values():
+        if isinstance(v, type) and issubclass(v, Command) and v.__name__[0].islower():
+            result[v.__name__] = v
+            result[v.__name__.replace("_", "-")] = v
+    return result
+
+
+default_keymap: tuple[tuple[KeySpec, CommandName], ...] = tuple(
+    [
+        (r"\C-a", "beginning-of-line"),
+        (r"\C-b", "left"),
+        (r"\C-c", "interrupt"),
+        (r"\C-d", "delete"),
+        (r"\C-e", "end-of-line"),
+        (r"\C-f", "right"),
+        (r"\C-g", "cancel"),
+        (r"\C-h", "backspace"),
+        (r"\C-j", "accept"),
+        (r"\<return>", "accept"),
+        (r"\C-k", "kill-line"),
+        (r"\C-l", "clear-screen"),
+        (r"\C-m", "accept"),
+        (r"\C-t", "transpose-characters"),
+        (r"\C-u", "unix-line-discard"),
+        (r"\C-w", "unix-word-rubout"),
+        (r"\C-x\C-u", "upcase-region"),
+        (r"\C-y", "yank"),
+        *(() if sys.platform == "win32" else ((r"\C-z", "suspend"), )),
+        (r"\M-b", "backward-word"),
+        (r"\M-c", "capitalize-word"),
+        (r"\M-d", "kill-word"),
+        (r"\M-f", "forward-word"),
+        (r"\M-l", "downcase-word"),
+        (r"\M-t", "transpose-words"),
+        (r"\M-u", "upcase-word"),
+        (r"\M-y", "yank-pop"),
+        (r"\M--", "digit-arg"),
+        (r"\M-0", "digit-arg"),
+        (r"\M-1", "digit-arg"),
+        (r"\M-2", "digit-arg"),
+        (r"\M-3", "digit-arg"),
+        (r"\M-4", "digit-arg"),
+        (r"\M-5", "digit-arg"),
+        (r"\M-6", "digit-arg"),
+        (r"\M-7", "digit-arg"),
+        (r"\M-8", "digit-arg"),
+        (r"\M-9", "digit-arg"),
+        (r"\M-\n", "accept"),
+        ("\\\\", "self-insert"),
+        (r"\x1b[200~", "perform-bracketed-paste"),
+        (r"\x03", "ctrl-c"),
+    ]
+    + [(c, "self-insert") for c in map(chr, range(32, 127)) if c != "\\"]
+    + [(c, "self-insert") for c in map(chr, range(128, 256)) if c.isalpha()]
+    + [
+        (r"\<up>", "up"),
+        (r"\<down>", "down"),
+        (r"\<left>", "left"),
+        (r"\C-\<left>", "backward-word"),
+        (r"\<right>", "right"),
+        (r"\C-\<right>", "forward-word"),
+        (r"\<delete>", "delete"),
+        (r"\x1b[3~", "delete"),
+        (r"\<backspace>", "backspace"),
+        (r"\M-\<backspace>", "backward-kill-word"),
+        (r"\<end>", "end-of-line"),  # was 'end'
+        (r"\<home>", "beginning-of-line"),  # was 'home'
+        (r"\<f1>", "help"),
+        (r"\<f2>", "show-history"),
+        (r"\<f3>", "paste-mode"),
+        (r"\EOF", "end"),  # the entries in the terminfo database for xterms
+        (r"\EOH", "home"),  # seem to be wrong.  this is a less than ideal
+        # workaround
+    ]
+)
+
+
+@dataclass(slots=True)
+class Reader:
+    """The Reader class implements the bare bones of a command reader,
+    handling such details as editing and cursor motion.  What it does
+    not support are such things as completion or history support -
+    these are implemented elsewhere.
+
+    Instance variables of note include:
+
+      * buffer:
+        A per-character list containing all the characters that have been
+        entered. Does not include color information.
+      * console:
+        Hopefully encapsulates the OS dependent stuff.
+      * pos:
+        A 0-based index into 'buffer' for where the insertion point
+        is.
+      * screeninfo:
+        A list of screen position tuples. Each list element is a tuple
+        representing information on visible line length for a given line.
+        Allows for efficient skipping of color escape sequences.
+      * cxy, lxy:
+        the position of the insertion point in screen ...
+      * syntax_table:
+        Dictionary mapping characters to 'syntax class'; read the
+        emacs docs to see what this means :-)
+      * commands:
+        Dictionary mapping command names to command classes.
+      * arg:
+        The emacs-style prefix argument.  It will be None if no such
+        argument has been provided.
+      * dirty:
+        True if we need to refresh the display.
+      * kill_ring:
+        The emacs-style kill-ring; manipulated with yank & yank-pop
+      * ps1, ps2, ps3, ps4:
+        prompts.  ps1 is the prompt for a one-line input; for a
+        multiline input it looks like:
+            ps2> first line of input goes here
+            ps3> second and further
+            ps3> lines get ps3
+            ...
+            ps4> and the last one gets ps4
+        As with the usual top-level, you can set these to instances if
+        you like; str() will be called on them (once) at the beginning
+        of each command.  Don't put really long or newline containing
+        strings here, please!
+        This is just the default policy; you can change it freely by
+        overriding get_prompt() (and indeed some standard subclasses
+        do).
+      * finished:
+        handle1 will set this to a true value if a command signals
+        that we're done.
+    """
+
+    console: console.Console
+
+    ## state
+    buffer: list[str] = field(default_factory=list)
+    pos: int = 0
+    ps1: str = "->> "
+    ps2: str = "/>> "
+    ps3: str = "|.. "
+    ps4: str = R"\__ "
+    kill_ring: list[list[str]] = field(default_factory=list)
+    msg: str = ""
+    arg: int | None = None
+    dirty: bool = False
+    finished: bool = False
+    paste_mode: bool = False
+    commands: dict[str, type[Command]] = field(default_factory=make_default_commands)
+    last_command: type[Command] | None = None
+    syntax_table: dict[str, int] = field(default_factory=make_default_syntax_table)
+    keymap: tuple[tuple[str, str], ...] = ()
+    input_trans: input.KeymapTranslator = field(init=False)
+    input_trans_stack: list[input.KeymapTranslator] = field(default_factory=list)
+    screen: list[str] = field(default_factory=list)
+    screeninfo: list[tuple[int, list[int]]] = field(init=False)
+    cxy: tuple[int, int] = field(init=False)
+    lxy: tuple[int, int] = field(init=False)
+    scheduled_commands: list[str] = field(default_factory=list)
+    can_colorize: bool = False
+    threading_hook: Callback | None = None
+
+    ## cached metadata to speed up screen refreshes
+    @dataclass
+    class RefreshCache:
+        screen: list[str] = field(default_factory=list)
+        screeninfo: list[tuple[int, list[int]]] = field(init=False)
+        line_end_offsets: list[int] = field(default_factory=list)
+        pos: int = field(init=False)
+        cxy: tuple[int, int] = field(init=False)
+        dimensions: tuple[int, int] = field(init=False)
+        invalidated: bool = False
+
+        def update_cache(self,
+                         reader: Reader,
+                         screen: list[str],
+                         screeninfo: list[tuple[int, list[int]]],
+            ) -> None:
+            self.screen = screen.copy()
+            self.screeninfo = screeninfo.copy()
+            self.pos = reader.pos
+            self.cxy = reader.cxy
+            self.dimensions = reader.console.width, reader.console.height
+            self.invalidated = False
+
+        def valid(self, reader: Reader) -> bool:
+            if self.invalidated:
+                return False
+            dimensions = reader.console.width, reader.console.height
+            dimensions_changed = dimensions != self.dimensions
+            return not dimensions_changed
+
+        def get_cached_location(self, reader: Reader) -> tuple[int, int]:
+            if self.invalidated:
+                raise ValueError("Cache is invalidated")
+            offset = 0
+            earliest_common_pos = min(reader.pos, self.pos)
+            num_common_lines = len(self.line_end_offsets)
+            while num_common_lines > 0:
+                offset = self.line_end_offsets[num_common_lines - 1]
+                if earliest_common_pos > offset:
+                    break
+                num_common_lines -= 1
+            else:
+                offset = 0
+            return offset, num_common_lines
+
+    last_refresh_cache: RefreshCache = field(default_factory=RefreshCache)
+
+    def __post_init__(self) -> None:
+        # Enable the use of `insert` without a `prepare` call - necessary to
+        # facilitate the tab completion hack implemented for
+        # <https://bugs.python.org/issue25660>.
+        self.keymap = self.collect_keymap()
+        self.input_trans = input.KeymapTranslator(
+            self.keymap, invalid_cls="invalid-key", character_cls="self-insert"
+        )
+        self.screeninfo = [(0, [])]
+        self.cxy = self.pos2xy()
+        self.lxy = (self.pos, 0)
+        self.can_colorize = _colorize.can_colorize()
+
+        self.last_refresh_cache.screeninfo = self.screeninfo
+        self.last_refresh_cache.pos = self.pos
+        self.last_refresh_cache.cxy = self.cxy
+        self.last_refresh_cache.dimensions = (0, 0)
+
+    def collect_keymap(self) -> tuple[tuple[KeySpec, CommandName], ...]:
+        return default_keymap
+
+    def calc_screen(self) -> list[str]:
+        """Translate changes in self.buffer into changes in self.console.screen."""
+        # Since the last call to calc_screen:
+        # screen and screeninfo may differ due to a completion menu being shown
+        # pos and cxy may differ due to edits, cursor movements, or completion menus
+
+        # Lines that are above both the old and new cursor position can't have changed,
+        # unless the terminal has been resized (which might cause reflowing) or we've
+        # entered or left paste mode (which changes prompts, causing reflowing).
+        num_common_lines = 0
+        offset = 0
+        if self.last_refresh_cache.valid(self):
+            offset, num_common_lines = self.last_refresh_cache.get_cached_location(self)
+
+        screen = self.last_refresh_cache.screen
+        del screen[num_common_lines:]
+
+        screeninfo = self.last_refresh_cache.screeninfo
+        del screeninfo[num_common_lines:]
+
+        last_refresh_line_end_offsets = self.last_refresh_cache.line_end_offsets
+        del last_refresh_line_end_offsets[num_common_lines:]
+
+        pos = self.pos
+        pos -= offset
+
+        prompt_from_cache = (offset and self.buffer[offset - 1] != "\n")
+
+        if self.can_colorize:
+            colors = list(gen_colors(self.get_unicode()))
+        else:
+            colors = None
+        trace("colors = {colors}", colors=colors)
+        lines = "".join(self.buffer[offset:]).split("\n")
+        cursor_found = False
+        lines_beyond_cursor = 0
+        for ln, line in enumerate(lines, num_common_lines):
+            line_len = len(line)
+            if 0 <= pos <= line_len:
+                self.lxy = pos, ln
+                cursor_found = True
+            elif cursor_found:
+                lines_beyond_cursor += 1
+                if lines_beyond_cursor > self.console.height:
+                    # No need to keep formatting lines.
+                    # The console can't show them.
+                    break
+            if prompt_from_cache:
+                # Only the first line's prompt can come from the cache
+                prompt_from_cache = False
+                prompt = ""
+            else:
+                prompt = self.get_prompt(ln, line_len >= pos >= 0)
+            while "\n" in prompt:
+                pre_prompt, _, prompt = prompt.partition("\n")
+                last_refresh_line_end_offsets.append(offset)
+                screen.append(pre_prompt)
+                screeninfo.append((0, []))
+            pos -= line_len + 1
+            prompt, prompt_len = self.process_prompt(prompt)
+            chars, char_widths = disp_str(line, colors, offset)
+            wrapcount = (sum(char_widths) + prompt_len) // self.console.width
+            if wrapcount == 0 or not char_widths:
+                offset += line_len + 1  # Takes all of the line plus the newline
+                last_refresh_line_end_offsets.append(offset)
+                screen.append(prompt + "".join(chars))
+                screeninfo.append((prompt_len, char_widths))
+            else:
+                pre = prompt
+                prelen = prompt_len
+                for wrap in range(wrapcount + 1):
+                    index_to_wrap_before = 0
+                    column = 0
+                    for char_width in char_widths:
+                        if column + char_width + prelen >= self.console.width:
+                            break
+                        index_to_wrap_before += 1
+                        column += char_width
+                    if len(chars) > index_to_wrap_before:
+                        offset += index_to_wrap_before
+                        post = "\\"
+                        after = [1]
+                    else:
+                        offset += index_to_wrap_before + 1  # Takes the newline
+                        post = ""
+                        after = []
+                    last_refresh_line_end_offsets.append(offset)
+                    render = pre + "".join(chars[:index_to_wrap_before]) + post
+                    render_widths = char_widths[:index_to_wrap_before] + after
+                    screen.append(render)
+                    screeninfo.append((prelen, render_widths))
+                    chars = chars[index_to_wrap_before:]
+                    char_widths = char_widths[index_to_wrap_before:]
+                    pre = ""
+                    prelen = 0
+        self.screeninfo = screeninfo
+        self.cxy = self.pos2xy()
+        if self.msg:
+            for mline in self.msg.split("\n"):
+                screen.append(mline)
+                screeninfo.append((0, []))
+
+        self.last_refresh_cache.update_cache(self, screen, screeninfo)
+        return screen
+
+    @staticmethod
+    def process_prompt(prompt: str) -> tuple[str, int]:
+        r"""Return a tuple with the prompt string and its visible length.
+
+        The prompt string has the zero-width brackets recognized by shells
+        (\x01 and \x02) removed.  The length ignores anything between those
+        brackets as well as any ANSI escape sequences.
+        """
+        out_prompt = unbracket(prompt, including_content=False)
+        visible_prompt = unbracket(prompt, including_content=True)
+        return out_prompt, wlen(visible_prompt)
+
+    def bow(self, p: int | None = None) -> int:
+        """Return the 0-based index of the word break preceding p most
+        immediately.
+
+        p defaults to self.pos; word boundaries are determined using
+        self.syntax_table."""
+        if p is None:
+            p = self.pos
+        st = self.syntax_table
+        b = self.buffer
+        p -= 1
+        while p >= 0 and st.get(b[p], SYNTAX_WORD) != SYNTAX_WORD:
+            p -= 1
+        while p >= 0 and st.get(b[p], SYNTAX_WORD) == SYNTAX_WORD:
+            p -= 1
+        return p + 1
+
+    def eow(self, p: int | None = None) -> int:
+        """Return the 0-based index of the word break following p most
+        immediately.
+
+        p defaults to self.pos; word boundaries are determined using
+        self.syntax_table."""
+        if p is None:
+            p = self.pos
+        st = self.syntax_table
+        b = self.buffer
+        while p < len(b) and st.get(b[p], SYNTAX_WORD) != SYNTAX_WORD:
+            p += 1
+        while p < len(b) and st.get(b[p], SYNTAX_WORD) == SYNTAX_WORD:
+            p += 1
+        return p
+
+    def bol(self, p: int | None = None) -> int:
+        """Return the 0-based index of the line break preceding p most
+        immediately.
+
+        p defaults to self.pos."""
+        if p is None:
+            p = self.pos
+        b = self.buffer
+        p -= 1
+        while p >= 0 and b[p] != "\n":
+            p -= 1
+        return p + 1
+
+    def eol(self, p: int | None = None) -> int:
+        """Return the 0-based index of the line break following p most
+        immediately.
+
+        p defaults to self.pos."""
+        if p is None:
+            p = self.pos
+        b = self.buffer
+        while p < len(b) and b[p] != "\n":
+            p += 1
+        return p
+
+    def max_column(self, y: int) -> int:
+        """Return the last x-offset for line y"""
+        return self.screeninfo[y][0] + sum(self.screeninfo[y][1])
+
+    def max_row(self) -> int:
+        return len(self.screeninfo) - 1
+
+    def get_arg(self, default: int = 1) -> int:
+        """Return any prefix argument that the user has supplied,
+        returning 'default' if there is None.  Defaults to 1.
+        """
+        if self.arg is None:
+            return default
+        return self.arg
+
+    def get_prompt(self, lineno: int, cursor_on_line: bool) -> str:
+        """Return what should be in the left-hand margin for line
+        'lineno'."""
+        if self.arg is not None and cursor_on_line:
+            prompt = f"(arg: {self.arg}) "
+        elif self.paste_mode:
+            prompt = "(paste) "
+        elif "\n" in self.buffer:
+            if lineno == 0:
+                prompt = self.ps2
+            elif self.ps4 and lineno == self.buffer.count("\n"):
+                prompt = self.ps4
+            else:
+                prompt = self.ps3
+        else:
+            prompt = self.ps1
+
+        if self.can_colorize:
+            t = THEME()
+            prompt = f"{t.prompt}{prompt}{t.reset}"
+        return prompt
+
+    def push_input_trans(self, itrans: input.KeymapTranslator) -> None:
+        self.input_trans_stack.append(self.input_trans)
+        self.input_trans = itrans
+
+    def pop_input_trans(self) -> None:
+        self.input_trans = self.input_trans_stack.pop()
+
+    def setpos_from_xy(self, x: int, y: int) -> None:
+        """Set pos according to coordinates x, y"""
+        pos = 0
+        i = 0
+        while i < y:
+            prompt_len, char_widths = self.screeninfo[i]
+            offset = len(char_widths)
+            in_wrapped_line = prompt_len + sum(char_widths) >= self.console.width
+            if in_wrapped_line:
+                pos += offset - 1  # -1 cause backslash is not in buffer
+            else:
+                pos += offset + 1  # +1 cause newline is in buffer
+            i += 1
+
+        j = 0
+        cur_x = self.screeninfo[i][0]
+        while cur_x < x:
+            if self.screeninfo[i][1][j] == 0:
+                j += 1  # prevent potential future infinite loop
+                continue
+            cur_x += self.screeninfo[i][1][j]
+            j += 1
+            pos += 1
+
+        self.pos = pos
+
+    def pos2xy(self) -> tuple[int, int]:
+        """Return the x, y coordinates of position 'pos'."""
+
+        prompt_len, y = 0, 0
+        char_widths: list[int] = []
+        pos = self.pos
+        assert 0 <= pos <= len(self.buffer)
+
+        # optimize for the common case: typing at the end of the buffer
+        if pos == len(self.buffer) and len(self.screeninfo) > 0:
+            y = len(self.screeninfo) - 1
+            prompt_len, char_widths = self.screeninfo[y]
+            return prompt_len + sum(char_widths), y
+
+        for prompt_len, char_widths in self.screeninfo:
+            offset = len(char_widths)
+            in_wrapped_line = prompt_len + sum(char_widths) >= self.console.width
+            if in_wrapped_line:
+                offset -= 1  # need to remove line-wrapping backslash
+
+            if offset >= pos:
+                break
+
+            if not in_wrapped_line:
+                offset += 1  # there's a newline in buffer
+
+            pos -= offset
+            y += 1
+        return prompt_len + sum(char_widths[:pos]), y
+
+    def insert(self, text: str | list[str]) -> None:
+        """Insert 'text' at the insertion point."""
+        self.buffer[self.pos : self.pos] = list(text)
+        self.pos += len(text)
+        self.dirty = True
+
+    def update_cursor(self) -> None:
+        """Move the cursor to reflect changes in self.pos"""
+        self.cxy = self.pos2xy()
+        trace("update_cursor({pos}) = {cxy}", pos=self.pos, cxy=self.cxy)
+        self.console.move_cursor(*self.cxy)
+
+    def after_command(self, cmd: Command) -> None:
+        """This function is called to allow post command cleanup."""
+        if getattr(cmd, "kills_digit_arg", True):
+            if self.arg is not None:
+                self.dirty = True
+            self.arg = None
+
+    def prepare(self) -> None:
+        """Get ready to run.  Call restore when finished.  You must not
+        write to the console in between the calls to prepare and
+        restore."""
+        try:
+            self.console.prepare()
+            self.arg = None
+            self.finished = False
+            del self.buffer[:]
+            self.pos = 0
+            self.dirty = True
+            self.last_command = None
+            self.calc_screen()
+        except BaseException:
+            self.restore()
+            raise
+
+        while self.scheduled_commands:
+            cmd = self.scheduled_commands.pop()
+            self.do_cmd((cmd, []))
+
+    def last_command_is(self, cls: type) -> bool:
+        if not self.last_command:
+            return False
+        return issubclass(cls, self.last_command)
+
+    def restore(self) -> None:
+        """Clean up after a run."""
+        self.console.restore()
+
+    @contextmanager
+    def suspend(self) -> SimpleContextManager:
+        """A context manager to delegate to another reader."""
+        prev_state = {f.name: getattr(self, f.name) for f in fields(self)}
+        try:
+            self.restore()
+            yield
+        finally:
+            for arg in ("msg", "ps1", "ps2", "ps3", "ps4", "paste_mode"):
+                setattr(self, arg, prev_state[arg])
+            self.prepare()
+
+    @contextmanager
+    def suspend_colorization(self) -> SimpleContextManager:
+        try:
+            old_can_colorize = self.can_colorize
+            self.can_colorize = False
+            yield
+        finally:
+            self.can_colorize = old_can_colorize
+
+
+    def finish(self) -> None:
+        """Called when a command signals that we're finished."""
+        pass
+
+    def error(self, msg: str = "none") -> None:
+        self.msg = "! " + msg + " "
+        self.dirty = True
+        self.console.beep()
+
+    def update_screen(self) -> None:
+        if self.dirty:
+            self.refresh()
+
+    def refresh(self) -> None:
+        """Recalculate and refresh the screen."""
+        # this call sets up self.cxy, so call it first.
+        self.screen = self.calc_screen()
+        self.console.refresh(self.screen, self.cxy)
+        self.dirty = False
+
+    def do_cmd(self, cmd: tuple[str, list[str]]) -> None:
+        """`cmd` is a tuple of "event_name" and "event", which in the current
+        implementation is always just the "buffer" which happens to be a list
+        of single-character strings."""
+
+        trace("received command {cmd}", cmd=cmd)
+        if isinstance(cmd[0], str):
+            command_type = self.commands.get(cmd[0], commands.invalid_command)
+        elif isinstance(cmd[0], type):
+            command_type = cmd[0]
+        else:
+            return  # nothing to do
+
+        command = command_type(self, *cmd)  # type: ignore[arg-type]
+        command.do()
+
+        self.after_command(command)
+
+        if self.dirty:
+            self.refresh()
+        else:
+            self.update_cursor()
+
+        if not isinstance(cmd, commands.digit_arg):
+            self.last_command = command_type
+
+        self.finished = bool(command.finish)
+        if self.finished:
+            self.console.finish()
+            self.finish()
+
+    def run_hooks(self) -> None:
+        threading_hook = self.threading_hook
+        if threading_hook is None and 'threading' in sys.modules:
+            from ._threading_handler import install_threading_hook
+            install_threading_hook(self)
+        if threading_hook is not None:
+            try:
+                threading_hook()
+            except Exception:
+                pass
+
+        input_hook = self.console.input_hook
+        if input_hook:
+            try:
+                input_hook()
+            except Exception:
+                pass
+
+    def handle1(self, block: bool = True) -> bool:
+        """Handle a single event.  Wait as long as it takes if block
+        is true (the default), otherwise return False if no event is
+        pending."""
+
+        if self.msg:
+            self.msg = ""
+            self.dirty = True
+
+        while True:
+            # We use the same timeout as in readline.c: 100ms
+            self.run_hooks()
+            self.console.wait(100)
+            event = self.console.get_event(block=False)
+            if not event:
+                if block:
+                    continue
+                return False
+
+            translate = True
+
+            if event.evt == "key":
+                self.input_trans.push(event)
+            elif event.evt == "scroll":
+                self.refresh()
+            elif event.evt == "resize":
+                self.refresh()
+            else:
+                translate = False
+
+            if translate:
+                cmd = self.input_trans.get()
+            else:
+                cmd = [event.evt, event.data]
+
+            if cmd is None:
+                if block:
+                    continue
+                return False
+
+            self.do_cmd(cmd)
+            return True
+
+    def push_char(self, char: int | bytes) -> None:
+        self.console.push_char(char)
+        self.handle1(block=False)
+
+    def readline(self, startup_hook: Callback | None = None) -> str:
+        """Read a line.  The implementation of this method also shows
+        how to drive Reader if you want more control over the event
+        loop."""
+        self.prepare()
+        try:
+            if startup_hook is not None:
+                startup_hook()
+            self.refresh()
+            while not self.finished:
+                self.handle1()
+            return self.get_unicode()
+
+        finally:
+            self.restore()
+
+    def bind(self, spec: KeySpec, command: CommandName) -> None:
+        self.keymap = self.keymap + ((spec, command),)
+        self.input_trans = input.KeymapTranslator(
+            self.keymap, invalid_cls="invalid-key", character_cls="self-insert"
+        )
+
+    def get_unicode(self) -> str:
+        """Return the current buffer as a unicode string."""
+        return "".join(self.buffer)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/readline.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/readline.py
new file mode 100644
index 0000000000000000000000000000000000000000..23b8fa6b9c7625e4f0de0365e99408211553f992
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/readline.py
@@ -0,0 +1,620 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Alex Gaynor
+#                       Antonio Cuni
+#                       Armin Rigo
+#                       Holger Krekel
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""A compatibility wrapper reimplementing the 'readline' standard module
+on top of pyrepl.  Not all functionalities are supported.  Contains
+extensions for multiline input.
+"""
+
+from __future__ import annotations
+
+import warnings
+from dataclasses import dataclass, field
+
+import os
+from site import gethistoryfile
+import sys
+from rlcompleter import Completer as RLCompleter
+
+from . import commands, historical_reader
+from .completing_reader import CompletingReader
+from .console import Console as ConsoleType
+from ._module_completer import ModuleCompleter, make_default_module_completer
+
+Console: type[ConsoleType]
+_error: tuple[type[Exception], ...] | type[Exception]
+
+if os.name == "nt":
+    from .windows_console import WindowsConsole as Console, _error
+else:
+    from .unix_console import UnixConsole as Console, _error
+
+ENCODING = sys.getdefaultencoding() or "latin1"
+
+
+# types
+Command = commands.Command
+from collections.abc import Callable, Collection
+from .types import Callback, Completer, KeySpec, CommandName
+
+TYPE_CHECKING = False
+
+if TYPE_CHECKING:
+    from typing import Any, Mapping
+
+
+MoreLinesCallable = Callable[[str], bool]
+
+
+__all__ = [
+    "add_history",
+    "clear_history",
+    "get_begidx",
+    "get_completer",
+    "get_completer_delims",
+    "get_current_history_length",
+    "get_endidx",
+    "get_history_item",
+    "get_history_length",
+    "get_line_buffer",
+    "insert_text",
+    "parse_and_bind",
+    "read_history_file",
+    # "read_init_file",
+    # "redisplay",
+    "remove_history_item",
+    "replace_history_item",
+    "set_auto_history",
+    "set_completer",
+    "set_completer_delims",
+    "set_history_length",
+    # "set_pre_input_hook",
+    "set_startup_hook",
+    "write_history_file",
+    "append_history_file",
+    # ---- multiline extensions ----
+    "multiline_input",
+]
+
+# ____________________________________________________________
+
+@dataclass
+class ReadlineConfig:
+    readline_completer: Completer | None = None
+    completer_delims: frozenset[str] = frozenset(" \t\n`~!@#$%^&*()-=+[{]}\\|;:'\",<>/?")
+    module_completer: ModuleCompleter = field(default_factory=make_default_module_completer)
+
+@dataclass(kw_only=True)
+class ReadlineAlikeReader(historical_reader.HistoricalReader, CompletingReader):
+    # Class fields
+    assume_immutable_completions = False
+    use_brackets = False
+    sort_in_column = True
+
+    # Instance fields
+    config: ReadlineConfig
+    more_lines: MoreLinesCallable | None = None
+    last_used_indentation: str | None = None
+
+    def __post_init__(self) -> None:
+        super().__post_init__()
+        self.commands["maybe_accept"] = maybe_accept
+        self.commands["maybe-accept"] = maybe_accept
+        self.commands["backspace_dedent"] = backspace_dedent
+        self.commands["backspace-dedent"] = backspace_dedent
+
+    def error(self, msg: str = "none") -> None:
+        pass  # don't show error messages by default
+
+    def get_stem(self) -> str:
+        b = self.buffer
+        p = self.pos - 1
+        completer_delims = self.config.completer_delims
+        while p >= 0 and b[p] not in completer_delims:
+            p -= 1
+        return "".join(b[p + 1 : self.pos])
+
+    def get_completions(self, stem: str) -> list[str]:
+        module_completions = self.get_module_completions()
+        if module_completions is not None:
+            return module_completions
+        if len(stem) == 0 and self.more_lines is not None:
+            b = self.buffer
+            p = self.pos
+            while p > 0 and b[p - 1] != "\n":
+                p -= 1
+            num_spaces = 4 - ((self.pos - p) % 4)
+            return [" " * num_spaces]
+        result = []
+        function = self.config.readline_completer
+        if function is not None:
+            try:
+                stem = str(stem)  # rlcompleter.py seems to not like unicode
+            except UnicodeEncodeError:
+                pass  # but feed unicode anyway if we have no choice
+            state = 0
+            while True:
+                try:
+                    next = function(stem, state)
+                except Exception:
+                    break
+                if not isinstance(next, str):
+                    break
+                result.append(next)
+                state += 1
+            # emulate the behavior of the standard readline that sorts
+            # the completions before displaying them.
+            result.sort()
+        return result
+
+    def get_module_completions(self) -> list[str] | None:
+        line = self.get_line()
+        return self.config.module_completer.get_completions(line)
+
+    def get_trimmed_history(self, maxlength: int) -> list[str]:
+        if maxlength >= 0:
+            cut = len(self.history) - maxlength
+            if cut < 0:
+                cut = 0
+        else:
+            cut = 0
+        return self.history[cut:]
+
+    def update_last_used_indentation(self) -> None:
+        indentation = _get_first_indentation(self.buffer)
+        if indentation is not None:
+            self.last_used_indentation = indentation
+
+    # --- simplified support for reading multiline Python statements ---
+
+    def collect_keymap(self) -> tuple[tuple[KeySpec, CommandName], ...]:
+        return super().collect_keymap() + (
+            (r"\n", "maybe-accept"),
+            (r"\<backspace>", "backspace-dedent"),
+        )
+
+    def after_command(self, cmd: Command) -> None:
+        super().after_command(cmd)
+        if self.more_lines is None:
+            # Force single-line input if we are in raw_input() mode.
+            # Although there is no direct way to add a \n in this mode,
+            # multiline buffers can still show up using various
+            # commands, e.g. navigating the history.
+            try:
+                index = self.buffer.index("\n")
+            except ValueError:
+                pass
+            else:
+                self.buffer = self.buffer[:index]
+                if self.pos > len(self.buffer):
+                    self.pos = len(self.buffer)
+
+
+def set_auto_history(_should_auto_add_history: bool) -> None:
+    """Enable or disable automatic history"""
+    historical_reader.should_auto_add_history = bool(_should_auto_add_history)
+
+
+def _get_this_line_indent(buffer: list[str], pos: int) -> int:
+    indent = 0
+    while pos > 0 and buffer[pos - 1] in " \t":
+        indent += 1
+        pos -= 1
+    if pos > 0 and buffer[pos - 1] == "\n":
+        return indent
+    return 0
+
+
+def _get_previous_line_indent(buffer: list[str], pos: int) -> tuple[int, int | None]:
+    prevlinestart = pos
+    while prevlinestart > 0 and buffer[prevlinestart - 1] != "\n":
+        prevlinestart -= 1
+    prevlinetext = prevlinestart
+    while prevlinetext < pos and buffer[prevlinetext] in " \t":
+        prevlinetext += 1
+    if prevlinetext == pos:
+        indent = None
+    else:
+        indent = prevlinetext - prevlinestart
+    return prevlinestart, indent
+
+
+def _get_first_indentation(buffer: list[str]) -> str | None:
+    indented_line_start = None
+    for i in range(len(buffer)):
+        if (i < len(buffer) - 1
+            and buffer[i] == "\n"
+            and buffer[i + 1] in " \t"
+        ):
+            indented_line_start = i + 1
+        elif indented_line_start is not None and buffer[i] not in " \t\n":
+            return ''.join(buffer[indented_line_start : i])
+    return None
+
+
+def _should_auto_indent(buffer: list[str], pos: int) -> bool:
+    # check if last character before "pos" is a colon, ignoring
+    # whitespaces and comments.
+    last_char = None
+    while pos > 0:
+        pos -= 1
+        if last_char is None:
+            if buffer[pos] not in " \t\n#":  # ignore whitespaces and comments
+                last_char = buffer[pos]
+        else:
+            # even if we found a non-whitespace character before
+            # original pos, we keep going back until newline is reached
+            # to make sure we ignore comments
+            if buffer[pos] == "\n":
+                break
+            if buffer[pos] == "#":
+                last_char = None
+    return last_char == ":"
+
+
+class maybe_accept(commands.Command):
+    def do(self) -> None:
+        r: ReadlineAlikeReader
+        r = self.reader  # type: ignore[assignment]
+        r.dirty = True  # this is needed to hide the completion menu, if visible
+
+        # if there are already several lines and the cursor
+        # is not on the last one, always insert a new \n.
+        text = r.get_unicode()
+
+        if "\n" in r.buffer[r.pos :] or (
+            r.more_lines is not None and r.more_lines(text)
+        ):
+            def _newline_before_pos():
+                before_idx = r.pos - 1
+                while before_idx > 0 and text[before_idx].isspace():
+                    before_idx -= 1
+                return text[before_idx : r.pos].count("\n") > 0
+
+            # if there's already a new line before the cursor then
+            # even if the cursor is followed by whitespace, we assume
+            # the user is trying to terminate the block
+            if _newline_before_pos() and text[r.pos:].isspace():
+                self.finish = True
+                return
+
+            # auto-indent the next line like the previous line
+            prevlinestart, indent = _get_previous_line_indent(r.buffer, r.pos)
+            r.insert("\n")
+            if not self.reader.paste_mode:
+                if indent:
+                    for i in range(prevlinestart, prevlinestart + indent):
+                        r.insert(r.buffer[i])
+                r.update_last_used_indentation()
+                if _should_auto_indent(r.buffer, r.pos):
+                    if r.last_used_indentation is not None:
+                        indentation = r.last_used_indentation
+                    else:
+                        # default
+                        indentation = " " * 4
+                    r.insert(indentation)
+        elif not self.reader.paste_mode:
+            self.finish = True
+        else:
+            r.insert("\n")
+
+
+class backspace_dedent(commands.Command):
+    def do(self) -> None:
+        r = self.reader
+        b = r.buffer
+        if r.pos > 0:
+            repeat = 1
+            if b[r.pos - 1] != "\n":
+                indent = _get_this_line_indent(b, r.pos)
+                if indent > 0:
+                    ls = r.pos - indent
+                    while ls > 0:
+                        ls, pi = _get_previous_line_indent(b, ls - 1)
+                        if pi is not None and pi < indent:
+                            repeat = indent - pi
+                            break
+            r.pos -= repeat
+            del b[r.pos : r.pos + repeat]
+            r.dirty = True
+        else:
+            self.reader.error("can't backspace at start")
+
+
+# ____________________________________________________________
+
+
+@dataclass(slots=True)
+class _ReadlineWrapper:
+    f_in: int = -1
+    f_out: int = -1
+    reader: ReadlineAlikeReader | None = field(default=None, repr=False)
+    saved_history_length: int = -1
+    startup_hook: Callback | None = None
+    config: ReadlineConfig = field(default_factory=ReadlineConfig, repr=False)
+
+    def __post_init__(self) -> None:
+        if self.f_in == -1:
+            self.f_in = os.dup(0)
+        if self.f_out == -1:
+            self.f_out = os.dup(1)
+
+    def get_reader(self) -> ReadlineAlikeReader:
+        if self.reader is None:
+            console = Console(self.f_in, self.f_out, encoding=ENCODING)
+            self.reader = ReadlineAlikeReader(console=console, config=self.config)
+        return self.reader
+
+    def input(self, prompt: object = "") -> str:
+        try:
+            reader = self.get_reader()
+        except _error:
+            assert raw_input is not None
+            return raw_input(prompt)
+        prompt_str = str(prompt)
+        reader.ps1 = prompt_str
+        sys.audit("builtins.input", prompt_str)
+        result = reader.readline(startup_hook=self.startup_hook)
+        sys.audit("builtins.input/result", result)
+        return result
+
+    def multiline_input(self, more_lines: MoreLinesCallable, ps1: str, ps2: str) -> str:
+        """Read an input on possibly multiple lines, asking for more
+        lines as long as 'more_lines(unicodetext)' returns an object whose
+        boolean value is true.
+        """
+        reader = self.get_reader()
+        saved = reader.more_lines
+        try:
+            reader.more_lines = more_lines
+            reader.ps1 = ps1
+            reader.ps2 = ps1
+            reader.ps3 = ps2
+            reader.ps4 = ""
+            with warnings.catch_warnings(action="ignore"):
+                return reader.readline()
+        finally:
+            reader.more_lines = saved
+            reader.paste_mode = False
+
+    def parse_and_bind(self, string: str) -> None:
+        pass  # XXX we don't support parsing GNU-readline-style init files
+
+    def set_completer(self, function: Completer | None = None) -> None:
+        self.config.readline_completer = function
+
+    def get_completer(self) -> Completer | None:
+        return self.config.readline_completer
+
+    def set_completer_delims(self, delimiters: Collection[str]) -> None:
+        self.config.completer_delims = frozenset(delimiters)
+
+    def get_completer_delims(self) -> str:
+        return "".join(sorted(self.config.completer_delims))
+
+    def _histline(self, line: str) -> str:
+        line = line.rstrip("\n")
+        return line
+
+    def get_history_length(self) -> int:
+        return self.saved_history_length
+
+    def set_history_length(self, length: int) -> None:
+        self.saved_history_length = length
+
+    def get_current_history_length(self) -> int:
+        return len(self.get_reader().history)
+
+    def read_history_file(self, filename: str = gethistoryfile()) -> None:
+        # multiline extension (really a hack) for the end of lines that
+        # are actually continuations inside a single multiline_input()
+        # history item: we use \r\n instead of just \n.  If the history
+        # file is passed to GNU readline, the extra \r are just ignored.
+        history = self.get_reader().history
+
+        with open(os.path.expanduser(filename), 'rb') as f:
+            is_editline = f.readline().startswith(b"_HiStOrY_V2_")
+            if is_editline:
+                encoding = "unicode-escape"
+            else:
+                f.seek(0)
+                encoding = "utf-8"
+
+            lines = [line.decode(encoding, errors='replace') for line in f.read().split(b'\n')]
+            buffer = []
+            for line in lines:
+                if line.endswith("\r"):
+                    buffer.append(line+'\n')
+                else:
+                    line = self._histline(line)
+                    if buffer:
+                        line = self._histline("".join(buffer).replace("\r", "") + line)
+                        del buffer[:]
+                    if line:
+                        history.append(line)
+        self.set_history_length(self.get_current_history_length())
+
+    def write_history_file(self, filename: str = gethistoryfile()) -> None:
+        maxlength = self.saved_history_length
+        history = self.get_reader().get_trimmed_history(maxlength)
+        f = open(os.path.expanduser(filename), "w",
+                 encoding="utf-8", newline="\n")
+        with f:
+            for entry in history:
+                entry = entry.replace("\n", "\r\n")  # multiline history support
+                f.write(entry + "\n")
+
+    def append_history_file(self, filename: str = gethistoryfile()) -> None:
+        reader = self.get_reader()
+        saved_length = self.get_history_length()
+        length = self.get_current_history_length() - saved_length
+        history = reader.get_trimmed_history(length)
+        f = open(os.path.expanduser(filename), "a",
+                 encoding="utf-8", newline="\n")
+        with f:
+            for entry in history:
+                entry = entry.replace("\n", "\r\n")  # multiline history support
+                f.write(entry + "\n")
+        self.set_history_length(saved_length + length)
+
+    def clear_history(self) -> None:
+        del self.get_reader().history[:]
+
+    def get_history_item(self, index: int) -> str | None:
+        history = self.get_reader().history
+        if 1 <= index <= len(history):
+            return history[index - 1]
+        else:
+            return None  # like readline.c
+
+    def remove_history_item(self, index: int) -> None:
+        history = self.get_reader().history
+        if 0 <= index < len(history):
+            del history[index]
+        else:
+            raise ValueError("No history item at position %d" % index)
+            # like readline.c
+
+    def replace_history_item(self, index: int, line: str) -> None:
+        history = self.get_reader().history
+        if 0 <= index < len(history):
+            history[index] = self._histline(line)
+        else:
+            raise ValueError("No history item at position %d" % index)
+            # like readline.c
+
+    def add_history(self, line: str) -> None:
+        self.get_reader().history.append(self._histline(line))
+
+    def set_startup_hook(self, function: Callback | None = None) -> None:
+        self.startup_hook = function
+
+    def get_line_buffer(self) -> str:
+        return self.get_reader().get_unicode()
+
+    def _get_idxs(self) -> tuple[int, int]:
+        start = cursor = self.get_reader().pos
+        buf = self.get_line_buffer()
+        for i in range(cursor - 1, -1, -1):
+            if buf[i] in self.get_completer_delims():
+                break
+            start = i
+        return start, cursor
+
+    def get_begidx(self) -> int:
+        return self._get_idxs()[0]
+
+    def get_endidx(self) -> int:
+        return self._get_idxs()[1]
+
+    def insert_text(self, text: str) -> None:
+        self.get_reader().insert(text)
+
+
+_wrapper = _ReadlineWrapper()
+
+# ____________________________________________________________
+# Public API
+
+parse_and_bind = _wrapper.parse_and_bind
+set_completer = _wrapper.set_completer
+get_completer = _wrapper.get_completer
+set_completer_delims = _wrapper.set_completer_delims
+get_completer_delims = _wrapper.get_completer_delims
+get_history_length = _wrapper.get_history_length
+set_history_length = _wrapper.set_history_length
+get_current_history_length = _wrapper.get_current_history_length
+read_history_file = _wrapper.read_history_file
+write_history_file = _wrapper.write_history_file
+append_history_file = _wrapper.append_history_file
+clear_history = _wrapper.clear_history
+get_history_item = _wrapper.get_history_item
+remove_history_item = _wrapper.remove_history_item
+replace_history_item = _wrapper.replace_history_item
+add_history = _wrapper.add_history
+set_startup_hook = _wrapper.set_startup_hook
+get_line_buffer = _wrapper.get_line_buffer
+get_begidx = _wrapper.get_begidx
+get_endidx = _wrapper.get_endidx
+insert_text = _wrapper.insert_text
+
+# Extension
+multiline_input = _wrapper.multiline_input
+
+# Internal hook
+_get_reader = _wrapper.get_reader
+
+# ____________________________________________________________
+# Stubs
+
+
+def _make_stub(_name: str, _ret: object) -> None:
+    def stub(*args: object, **kwds: object) -> None:
+        import warnings
+
+        warnings.warn("readline.%s() not implemented" % _name, stacklevel=2)
+
+    stub.__name__ = _name
+    globals()[_name] = stub
+
+
+for _name, _ret in [
+    ("read_init_file", None),
+    ("redisplay", None),
+    ("set_pre_input_hook", None),
+]:
+    assert _name not in globals(), _name
+    _make_stub(_name, _ret)
+
+# ____________________________________________________________
+
+
+def _setup(namespace: Mapping[str, Any]) -> None:
+    global raw_input
+    if raw_input is not None:
+        return  # don't run _setup twice
+
+    try:
+        f_in = sys.stdin.fileno()
+        f_out = sys.stdout.fileno()
+    except (AttributeError, ValueError):
+        return
+    if not os.isatty(f_in) or not os.isatty(f_out):
+        return
+
+    _wrapper.f_in = f_in
+    _wrapper.f_out = f_out
+
+    # set up namespace in rlcompleter, which requires it to be a bona fide dict
+    if not isinstance(namespace, dict):
+        namespace = dict(namespace)
+    _wrapper.config.module_completer = ModuleCompleter(namespace)
+    _wrapper.config.readline_completer = RLCompleter(namespace).complete
+
+    # this is not really what readline.c does.  Better than nothing I guess
+    import builtins
+    raw_input = builtins.input
+    builtins.input = _wrapper.input
+
+
+raw_input: Callable[[object], str] | None = None
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/simple_interact.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/simple_interact.py
new file mode 100644
index 0000000000000000000000000000000000000000..6508f0233b963ad2fe3b0d6f5775d9425f5efe3d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/simple_interact.py
@@ -0,0 +1,181 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""This is an alternative to python_reader which tries to emulate
+the CPython prompt as closely as possible, with the exception of
+allowing multiline input and multiline history entries.
+"""
+
+from __future__ import annotations
+
+import _sitebuiltins
+import functools
+import os
+import sys
+import code
+import warnings
+import errno
+
+from .readline import _get_reader, multiline_input, append_history_file
+
+
+_error: tuple[type[Exception], ...] | type[Exception]
+try:
+    from .unix_console import _error
+except ModuleNotFoundError:
+    from .windows_console import _error
+
+def check() -> str:
+    """Returns the error message if there is a problem initializing the state."""
+    try:
+        _get_reader()
+    except _error as e:
+        if term := os.environ.get("TERM", ""):
+            term = f"; TERM={term}"
+        return str(str(e) or repr(e) or "unknown error") + term
+    return ""
+
+
+def _strip_final_indent(text: str) -> str:
+    # kill spaces and tabs at the end, but only if they follow '\n'.
+    # meant to remove the auto-indentation only (although it would of
+    # course also remove explicitly-added indentation).
+    short = text.rstrip(" \t")
+    n = len(short)
+    if n > 0 and text[n - 1] == "\n":
+        return short
+    return text
+
+
+def _clear_screen():
+    reader = _get_reader()
+    reader.scheduled_commands.append("clear_screen")
+
+
+REPL_COMMANDS = {
+    "exit": _sitebuiltins.Quitter('exit', ''),
+    "quit": _sitebuiltins.Quitter('quit' ,''),
+    "copyright": _sitebuiltins._Printer('copyright', sys.copyright),
+    "help": _sitebuiltins._Helper(),
+    "clear": _clear_screen,
+    "\x1a": _sitebuiltins.Quitter('\x1a', ''),
+}
+
+
+def _more_lines(console: code.InteractiveConsole, unicodetext: str) -> bool:
+    # ooh, look at the hack:
+    src = _strip_final_indent(unicodetext)
+    try:
+        code = console.compile(src, "<stdin>", "single")
+    except (OverflowError, SyntaxError, ValueError):
+        lines = src.splitlines(keepends=True)
+        if len(lines) == 1:
+            return False
+
+        last_line = lines[-1]
+        was_indented = last_line.startswith((" ", "\t"))
+        not_empty = last_line.strip() != ""
+        incomplete = not last_line.endswith("\n")
+        return (was_indented or not_empty) and incomplete
+    else:
+        return code is None
+
+
+def run_multiline_interactive_console(
+    console: code.InteractiveConsole,
+    *,
+    future_flags: int = 0,
+) -> None:
+    from .readline import _setup
+    _setup(console.locals)
+    if future_flags:
+        console.compile.compiler.flags |= future_flags
+
+    more_lines = functools.partial(_more_lines, console)
+    input_n = 0
+
+    _is_x_showrefcount_set = sys._xoptions.get("showrefcount")
+    _is_pydebug_build = hasattr(sys, "gettotalrefcount")
+    show_ref_count = _is_x_showrefcount_set and _is_pydebug_build
+
+    def maybe_run_command(statement: str) -> bool:
+        statement = statement.strip()
+        if statement in console.locals or statement not in REPL_COMMANDS:
+            return False
+
+        reader = _get_reader()
+        reader.history.pop()  # skip internal commands in history
+        command = REPL_COMMANDS[statement]
+        if callable(command):
+            # Make sure that history does not change because of commands
+            with reader.suspend_history(), reader.suspend_colorization():
+                command()
+            return True
+        return False
+
+    while True:
+        try:
+            try:
+                sys.stdout.flush()
+            except Exception:
+                pass
+
+            ps1 = getattr(sys, "ps1", ">>> ")
+            ps2 = getattr(sys, "ps2", "... ")
+            try:
+                statement = multiline_input(more_lines, ps1, ps2)
+            except EOFError:
+                break
+
+            if maybe_run_command(statement):
+                continue
+
+            input_name = f"<python-input-{input_n}>"
+            more = console.push(_strip_final_indent(statement), filename=input_name, _symbol="single")  # type: ignore[call-arg]
+            assert not more
+            try:
+                append_history_file()
+            except (FileNotFoundError, PermissionError, OSError) as e:
+                warnings.warn(f"failed to open the history file for writing: {e}")
+
+            input_n += 1
+        except KeyboardInterrupt:
+            r = _get_reader()
+            r.cmpltn_reset()
+            if r.input_trans is r.isearch_trans:
+                r.do_cmd(("isearch-end", [""]))
+            r.pos = len(r.get_unicode())
+            r.dirty = True
+            r.refresh()
+            console.write("\nKeyboardInterrupt\n")
+            console.resetbuffer()
+        except MemoryError:
+            console.write("\nMemoryError\n")
+            console.resetbuffer()
+        except SystemExit:
+            raise
+        except:
+            console.showtraceback()
+            console.resetbuffer()
+        if show_ref_count:
+            console.write(
+                f"[{sys.gettotalrefcount()} refs,"
+                f" {sys.getallocatedblocks()} blocks]\n"
+            )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/terminfo.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/terminfo.py
new file mode 100644
index 0000000000000000000000000000000000000000..d02ef69cce0bd845aab9446c2254a87fe66af6f1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/terminfo.py
@@ -0,0 +1,488 @@
+"""Pure Python curses-like terminal capability queries."""
+
+from dataclasses import dataclass, field
+import errno
+import os
+from pathlib import Path
+import re
+import struct
+
+
+# Terminfo constants
+MAGIC16 = 0o432  # Magic number for 16-bit terminfo format
+MAGIC32 = 0o1036  # Magic number for 32-bit terminfo format
+
+# Special values for absent/cancelled capabilities
+ABSENT_BOOLEAN = -1
+ABSENT_NUMERIC = -1
+CANCELLED_NUMERIC = -2
+ABSENT_STRING = None
+CANCELLED_STRING = None
+
+
+# Standard string capability names from ncurses Caps file
+# This matches the order used by ncurses when compiling terminfo
+# fmt: off
+_STRING_NAMES: tuple[str, ...] = (
+    "cbt", "bel", "cr", "csr", "tbc", "clear", "el", "ed", "hpa", "cmdch",
+    "cup", "cud1", "home", "civis", "cub1", "mrcup", "cnorm", "cuf1", "ll",
+    "cuu1", "cvvis", "dch1", "dl1", "dsl", "hd", "smacs", "blink", "bold",
+    "smcup", "smdc", "dim", "smir", "invis", "prot", "rev", "smso", "smul",
+    "ech", "rmacs", "sgr0", "rmcup", "rmdc", "rmir", "rmso", "rmul", "flash",
+    "ff", "fsl", "is1", "is2", "is3", "if", "ich1", "il1", "ip", "kbs", "ktbc",
+    "kclr", "kctab", "kdch1", "kdl1", "kcud1", "krmir", "kel", "ked", "kf0",
+    "kf1", "kf10", "kf2", "kf3", "kf4", "kf5", "kf6", "kf7", "kf8", "kf9",
+    "khome", "kich1", "kil1", "kcub1", "kll", "knp", "kpp", "kcuf1", "kind",
+    "kri", "khts", "kcuu1", "rmkx", "smkx", "lf0", "lf1", "lf10", "lf2", "lf3",
+    "lf4", "lf5", "lf6", "lf7", "lf8", "lf9", "rmm", "smm", "nel", "pad", "dch",
+    "dl", "cud", "ich", "indn", "il", "cub", "cuf", "rin", "cuu", "pfkey",
+    "pfloc", "pfx", "mc0", "mc4", "mc5", "rep", "rs1", "rs2", "rs3", "rf", "rc",
+    "vpa", "sc", "ind", "ri", "sgr", "hts", "wind", "ht", "tsl", "uc", "hu",
+    "iprog", "ka1", "ka3", "kb2", "kc1", "kc3", "mc5p", "rmp", "acsc", "pln",
+    "kcbt", "smxon", "rmxon", "smam", "rmam", "xonc", "xoffc", "enacs", "smln",
+    "rmln", "kbeg", "kcan", "kclo", "kcmd", "kcpy", "kcrt", "kend", "kent",
+    "kext", "kfnd", "khlp", "kmrk", "kmsg", "kmov", "knxt", "kopn", "kopt",
+    "kprv", "kprt", "krdo", "kref", "krfr", "krpl", "krst", "kres", "ksav",
+    "kspd", "kund", "kBEG", "kCAN", "kCMD", "kCPY", "kCRT", "kDC", "kDL",
+    "kslt", "kEND", "kEOL", "kEXT", "kFND", "kHLP", "kHOM", "kIC", "kLFT",
+    "kMSG", "kMOV", "kNXT", "kOPT", "kPRV", "kPRT", "kRDO", "kRPL", "kRIT",
+    "kRES", "kSAV", "kSPD", "kUND", "rfi", "kf11", "kf12", "kf13", "kf14",
+    "kf15", "kf16", "kf17", "kf18", "kf19", "kf20", "kf21", "kf22", "kf23",
+    "kf24", "kf25", "kf26", "kf27", "kf28", "kf29", "kf30", "kf31", "kf32",
+    "kf33", "kf34", "kf35", "kf36", "kf37", "kf38", "kf39", "kf40", "kf41",
+    "kf42", "kf43", "kf44", "kf45", "kf46", "kf47", "kf48", "kf49", "kf50",
+    "kf51", "kf52", "kf53", "kf54", "kf55", "kf56", "kf57", "kf58", "kf59",
+    "kf60", "kf61", "kf62", "kf63", "el1", "mgc", "smgl", "smgr", "fln", "sclk",
+    "dclk", "rmclk", "cwin", "wingo", "hup","dial", "qdial", "tone", "pulse",
+    "hook", "pause", "wait", "u0", "u1", "u2", "u3", "u4", "u5", "u6", "u7",
+    "u8", "u9", "op", "oc", "initc", "initp", "scp", "setf", "setb", "cpi",
+    "lpi", "chr", "cvr", "defc", "swidm", "sdrfq", "sitm", "slm", "smicm",
+    "snlq", "snrmq", "sshm", "ssubm", "ssupm", "sum", "rwidm", "ritm", "rlm",
+    "rmicm", "rshm", "rsubm", "rsupm", "rum", "mhpa", "mcud1", "mcub1", "mcuf1",
+    "mvpa", "mcuu1", "porder", "mcud", "mcub", "mcuf", "mcuu", "scs", "smgb",
+    "smgbp", "smglp", "smgrp", "smgt", "smgtp", "sbim", "scsd", "rbim", "rcsd",
+    "subcs", "supcs", "docr", "zerom", "csnm", "kmous", "minfo", "reqmp",
+    "getm", "setaf", "setab", "pfxl", "devt", "csin", "s0ds", "s1ds", "s2ds",
+    "s3ds", "smglr", "smgtb", "birep", "binel", "bicr", "colornm", "defbi",
+    "endbi", "setcolor", "slines", "dispc", "smpch", "rmpch", "smsc", "rmsc",
+    "pctrm", "scesc", "scesa", "ehhlm", "elhlm", "elohlm", "erhlm", "ethlm",
+    "evhlm", "sgr1", "slength", "OTi2", "OTrs", "OTnl", "OTbc", "OTko", "OTma",
+    "OTG2", "OTG3", "OTG1", "OTG4", "OTGR", "OTGL", "OTGU", "OTGD", "OTGH",
+    "OTGV", "OTGC","meml", "memu", "box1"
+)
+# fmt: on
+
+
+def _get_terminfo_dirs() -> list[Path]:
+    """Get list of directories to search for terminfo files.
+
+    Based on ncurses behavior in:
+    - ncurses/tinfo/db_iterator.c:_nc_next_db()
+    - ncurses/tinfo/read_entry.c:_nc_read_entry()
+    """
+    dirs = []
+
+    terminfo = os.environ.get("TERMINFO")
+    if terminfo:
+        dirs.append(terminfo)
+
+    try:
+        home = Path.home()
+        dirs.append(str(home / ".terminfo"))
+    except RuntimeError:
+        pass
+
+    # Check TERMINFO_DIRS
+    terminfo_dirs = os.environ.get("TERMINFO_DIRS", "")
+    if terminfo_dirs:
+        for d in terminfo_dirs.split(":"):
+            if d:
+                dirs.append(d)
+
+    dirs.extend(
+        [
+            "/etc/terminfo",
+            "/lib/terminfo",
+            "/usr/lib/terminfo",
+            "/usr/share/terminfo",
+            "/usr/share/lib/terminfo",
+            "/usr/share/misc/terminfo",
+            "/usr/local/lib/terminfo",
+            "/usr/local/share/terminfo",
+        ]
+    )
+
+    return [Path(d) for d in dirs if Path(d).is_dir()]
+
+
+def _validate_terminal_name_or_raise(terminal_name: str) -> None:
+    if not isinstance(terminal_name, str):
+        raise TypeError("`terminal_name` must be a string")
+
+    if not terminal_name:
+        raise ValueError("`terminal_name` cannot be empty")
+
+    if "\x00" in terminal_name:
+        raise ValueError("NUL character found in `terminal_name`")
+
+    t = Path(terminal_name)
+    if len(t.parts) > 1:
+        raise ValueError("`terminal_name` cannot contain path separators")
+
+
+def _read_terminfo_file(terminal_name: str) -> bytes:
+    """Find and read terminfo file for given terminal name.
+
+    Terminfo files are stored in directories using the first character
+    of the terminal name as a subdirectory.
+    """
+    _validate_terminal_name_or_raise(terminal_name)
+    first_char = terminal_name[0].lower()
+    filename = terminal_name
+
+    for directory in _get_terminfo_dirs():
+        path = directory / first_char / filename
+        if path.is_file():
+            return path.read_bytes()
+
+        # Try with hex encoding of first char (for special chars)
+        hex_dir = "%02x" % ord(first_char)
+        path = directory / hex_dir / filename
+        if path.is_file():
+            return path.read_bytes()
+
+    raise FileNotFoundError(errno.ENOENT, os.strerror(errno.ENOENT), filename)
+
+
+# Hard-coded terminal capabilities for common terminals
+# This is a minimal subset needed by PyREPL
+_TERMINAL_CAPABILITIES = {
+    # ANSI/xterm-compatible terminals
+    "ansi": {
+        # Bell
+        "bel": b"\x07",
+        # Cursor movement
+        "cub": b"\x1b[%p1%dD",  # Move cursor left N columns
+        "cud": b"\x1b[%p1%dB",  # Move cursor down N rows
+        "cuf": b"\x1b[%p1%dC",  # Move cursor right N columns
+        "cuu": b"\x1b[%p1%dA",  # Move cursor up N rows
+        "cub1": b"\x08",  # Move cursor left 1 column
+        "cud1": b"\n",  # Move cursor down 1 row
+        "cuf1": b"\x1b[C",  # Move cursor right 1 column
+        "cuu1": b"\x1b[A",  # Move cursor up 1 row
+        "cup": b"\x1b[%i%p1%d;%p2%dH",  # Move cursor to row, column
+        "hpa": b"\x1b[%i%p1%dG",  # Move cursor to column
+        # Clear operations
+        "clear": b"\x1b[H\x1b[2J",  # Clear screen and home cursor
+        "el": b"\x1b[K",  # Clear to end of line
+        # Insert/delete
+        "dch": b"\x1b[%p1%dP",  # Delete N characters
+        "dch1": b"\x1b[P",  # Delete 1 character
+        "ich": b"\x1b[%p1%d@",  # Insert N characters
+        "ich1": b"",  # Insert 1 character
+        # Cursor visibility
+        "civis": b"\x1b[?25l",  # Make cursor invisible
+        "cnorm": b"\x1b[?12l\x1b[?25h",  # Make cursor normal (visible)
+        # Scrolling
+        "ind": b"\n",  # Scroll up one line
+        "ri": b"\x1bM",  # Scroll down one line
+        # Keypad mode
+        "smkx": b"\x1b[?1h\x1b=",  # Enable keypad mode
+        "rmkx": b"\x1b[?1l\x1b>",  # Disable keypad mode
+        # Padding (not used in modern terminals)
+        "pad": b"",
+        # Function keys and special keys
+        "kdch1": b"\x1b[3~",  # Delete key
+        "kcud1": b"\x1bOB",  # Down arrow
+        "kend": b"\x1bOF",  # End key
+        "kent": b"\x1bOM",  # Enter key
+        "khome": b"\x1bOH",  # Home key
+        "kich1": b"\x1b[2~",  # Insert key
+        "kcub1": b"\x1bOD",  # Left arrow
+        "knp": b"\x1b[6~",  # Page down
+        "kpp": b"\x1b[5~",  # Page up
+        "kcuf1": b"\x1bOC",  # Right arrow
+        "kcuu1": b"\x1bOA",  # Up arrow
+        # Function keys F1-F20
+        "kf1": b"\x1bOP",
+        "kf2": b"\x1bOQ",
+        "kf3": b"\x1bOR",
+        "kf4": b"\x1bOS",
+        "kf5": b"\x1b[15~",
+        "kf6": b"\x1b[17~",
+        "kf7": b"\x1b[18~",
+        "kf8": b"\x1b[19~",
+        "kf9": b"\x1b[20~",
+        "kf10": b"\x1b[21~",
+        "kf11": b"\x1b[23~",
+        "kf12": b"\x1b[24~",
+        "kf13": b"\x1b[1;2P",
+        "kf14": b"\x1b[1;2Q",
+        "kf15": b"\x1b[1;2R",
+        "kf16": b"\x1b[1;2S",
+        "kf17": b"\x1b[15;2~",
+        "kf18": b"\x1b[17;2~",
+        "kf19": b"\x1b[18;2~",
+        "kf20": b"\x1b[19;2~",
+    },
+    # Dumb terminal - minimal capabilities
+    "dumb": {
+        "bel": b"\x07",  # Bell
+        "cud1": b"\n",  # Move down 1 row (newline)
+        "ind": b"\n",  # Scroll up one line (newline)
+    },
+    # Linux console
+    "linux": {
+        # Bell
+        "bel": b"\x07",
+        # Cursor movement
+        "cub": b"\x1b[%p1%dD",  # Move cursor left N columns
+        "cud": b"\x1b[%p1%dB",  # Move cursor down N rows
+        "cuf": b"\x1b[%p1%dC",  # Move cursor right N columns
+        "cuu": b"\x1b[%p1%dA",  # Move cursor up N rows
+        "cub1": b"\x08",  # Move cursor left 1 column (backspace)
+        "cud1": b"\n",  # Move cursor down 1 row (newline)
+        "cuf1": b"\x1b[C",  # Move cursor right 1 column
+        "cuu1": b"\x1b[A",  # Move cursor up 1 row
+        "cup": b"\x1b[%i%p1%d;%p2%dH",  # Move cursor to row, column
+        "hpa": b"\x1b[%i%p1%dG",  # Move cursor to column
+        # Clear operations
+        "clear": b"\x1b[H\x1b[J",  # Clear screen and home cursor (different from ansi!)
+        "el": b"\x1b[K",  # Clear to end of line
+        # Insert/delete
+        "dch": b"\x1b[%p1%dP",  # Delete N characters
+        "dch1": b"\x1b[P",  # Delete 1 character
+        "ich": b"\x1b[%p1%d@",  # Insert N characters
+        "ich1": b"\x1b[@",  # Insert 1 character
+        # Cursor visibility
+        "civis": b"\x1b[?25l\x1b[?1c",  # Make cursor invisible
+        "cnorm": b"\x1b[?25h\x1b[?0c",  # Make cursor normal
+        # Scrolling
+        "ind": b"\n",  # Scroll up one line
+        "ri": b"\x1bM",  # Scroll down one line
+        # Keypad mode
+        "smkx": b"\x1b[?1h\x1b=",  # Enable keypad mode
+        "rmkx": b"\x1b[?1l\x1b>",  # Disable keypad mode
+        # Function keys and special keys
+        "kdch1": b"\x1b[3~",  # Delete key
+        "kcud1": b"\x1b[B",  # Down arrow
+        "kend": b"\x1b[4~",  # End key (different from ansi!)
+        "khome": b"\x1b[1~",  # Home key (different from ansi!)
+        "kich1": b"\x1b[2~",  # Insert key
+        "kcub1": b"\x1b[D",  # Left arrow
+        "knp": b"\x1b[6~",  # Page down
+        "kpp": b"\x1b[5~",  # Page up
+        "kcuf1": b"\x1b[C",  # Right arrow
+        "kcuu1": b"\x1b[A",  # Up arrow
+        # Function keys
+        "kf1": b"\x1b[[A",
+        "kf2": b"\x1b[[B",
+        "kf3": b"\x1b[[C",
+        "kf4": b"\x1b[[D",
+        "kf5": b"\x1b[[E",
+        "kf6": b"\x1b[17~",
+        "kf7": b"\x1b[18~",
+        "kf8": b"\x1b[19~",
+        "kf9": b"\x1b[20~",
+        "kf10": b"\x1b[21~",
+        "kf11": b"\x1b[23~",
+        "kf12": b"\x1b[24~",
+        "kf13": b"\x1b[25~",
+        "kf14": b"\x1b[26~",
+        "kf15": b"\x1b[28~",
+        "kf16": b"\x1b[29~",
+        "kf17": b"\x1b[31~",
+        "kf18": b"\x1b[32~",
+        "kf19": b"\x1b[33~",
+        "kf20": b"\x1b[34~",
+    },
+}
+
+# Map common TERM values to capability sets
+_TERM_ALIASES = {
+    "xterm": "ansi",
+    "xterm-color": "ansi",
+    "xterm-256color": "ansi",
+    "screen": "ansi",
+    "screen-256color": "ansi",
+    "tmux": "ansi",
+    "tmux-256color": "ansi",
+    "vt100": "ansi",
+    "vt220": "ansi",
+    "rxvt": "ansi",
+    "rxvt-unicode": "ansi",
+    "rxvt-unicode-256color": "ansi",
+    "unknown": "dumb",
+}
+
+
+@dataclass
+class TermInfo:
+    terminal_name: str | bytes | None
+    fallback: bool = True
+
+    _capabilities: dict[str, bytes] = field(default_factory=dict)
+
+    def __post_init__(self) -> None:
+        """Initialize terminal capabilities for the given terminal type.
+
+        Based on ncurses implementation in:
+        - ncurses/tinfo/lib_setup.c:setupterm() and _nc_setupterm()
+        - ncurses/tinfo/lib_setup.c:TINFO_SETUP_TERM()
+
+        This version first attempts to read terminfo database files like ncurses,
+        then, if `fallback` is True, falls back to hardcoded capabilities for
+        common terminal types.
+        """
+        # If termstr is None or empty, try to get from environment
+        if not self.terminal_name:
+            self.terminal_name = os.environ.get("TERM") or "ANSI"
+
+        if isinstance(self.terminal_name, bytes):
+            self.terminal_name = self.terminal_name.decode("ascii")
+
+        try:
+            self._parse_terminfo_file(self.terminal_name)
+        except (OSError, ValueError):
+            if not self.fallback:
+                raise
+
+            term_type = _TERM_ALIASES.get(
+                self.terminal_name, self.terminal_name
+            )
+            if term_type not in _TERMINAL_CAPABILITIES:
+                term_type = "dumb"
+            self._capabilities = _TERMINAL_CAPABILITIES[term_type].copy()
+
+    def _parse_terminfo_file(self, terminal_name: str) -> None:
+        """Parse a terminfo file.
+
+        Populate the _capabilities dict for easy retrieval
+
+        Based on ncurses implementation in:
+        - ncurses/tinfo/read_entry.c:_nc_read_termtype()
+        - ncurses/tinfo/read_entry.c:_nc_read_file_entry()
+        - ncurses/tinfo/lib_ti.c:tigetstr()
+        """
+        data = _read_terminfo_file(terminal_name)
+        too_short = f"TermInfo file for {terminal_name!r} too short"
+        offset = 12
+        if len(data) < offset:
+            raise ValueError(too_short)
+
+        magic, name_size, bool_count, num_count, str_count, str_size = (
+            struct.unpack("<Hhhhhh", data[:offset])
+        )
+
+        if magic == MAGIC16:
+            number_size = 2
+        elif magic == MAGIC32:
+            number_size = 4
+        else:
+            raise ValueError(
+                f"TermInfo file for {terminal_name!r} uses unknown magic"
+            )
+
+        # Skip data than PyREPL doesn't need:
+        # - names (`|`-separated ASCII strings)
+        # - boolean capabilities (bytes with value 0 or 1)
+        # - numbers (little-endian integers, `number_size` bytes each)
+        offset += name_size
+        offset += bool_count
+        if offset % 2:
+            # Align to even byte boundary for numbers
+            offset += 1
+        offset += num_count * number_size
+        if offset > len(data):
+            raise ValueError(too_short)
+
+        # Read string offsets
+        end_offset = offset + 2 * str_count
+        if offset > len(data):
+            raise ValueError(too_short)
+        string_offset_data = data[offset:end_offset]
+        string_offsets = [
+            off for [off] in struct.iter_unpack("<h", string_offset_data)
+        ]
+        offset = end_offset
+
+        # Read string table
+        if offset + str_size > len(data):
+            raise ValueError(too_short)
+        string_table = data[offset : offset + str_size]
+
+        # Extract strings from string table
+        capabilities = {}
+        for cap, off in zip(_STRING_NAMES, string_offsets):
+            if off < 0:
+                # CANCELLED_STRING; we do not store those
+                continue
+            elif off < len(string_table):
+                # Find null terminator
+                end = string_table.find(0, off)
+                if end >= 0:
+                    capabilities[cap] = string_table[off:end]
+            # in other cases this is ABSENT_STRING; we don't store those.
+
+        # Note: we don't support extended capabilities since PyREPL doesn't
+        # need them.
+
+        self._capabilities = capabilities
+
+    def get(self, cap: str) -> bytes | None:
+        """Get terminal capability string by name.
+        """
+        if not isinstance(cap, str):
+            raise TypeError(f"`cap` must be a string, not {type(cap)}")
+
+        return self._capabilities.get(cap)
+
+
+def tparm(cap_bytes: bytes, *params: int) -> bytes:
+    """Parameterize a terminal capability string.
+
+    Based on ncurses implementation in:
+    - ncurses/tinfo/lib_tparm.c:tparm()
+    - ncurses/tinfo/lib_tparm.c:tparam_internal()
+
+    The ncurses version implements a full stack-based interpreter for
+    terminfo parameter strings. This pure Python version implements only
+    the subset of parameter substitution operations needed by PyREPL:
+    - %i (increment parameters for 1-based indexing)
+    - %p[1-9]%d (parameter substitution)
+    - %p[1-9]%{n}%+%d (parameter plus constant)
+    """
+    if not isinstance(cap_bytes, bytes):
+        raise TypeError(f"`cap` must be bytes, not {type(cap_bytes)}")
+
+    result = cap_bytes
+
+    # %i - increment parameters (1-based instead of 0-based)
+    increment = b"%i" in result
+    if increment:
+        result = result.replace(b"%i", b"")
+
+    # Replace %p1%d, %p2%d, etc. with actual parameter values
+    for i in range(len(params)):
+        pattern = b"%%p%d%%d" % (i + 1)
+        if pattern in result:
+            value = params[i]
+            if increment:
+                value += 1
+            result = result.replace(pattern, str(value).encode("ascii"))
+
+    # Handle %p1%{1}%+%d (parameter plus constant)
+    # Used in some cursor positioning sequences
+    pattern_re = re.compile(rb"%p(\d)%\{(\d+)\}%\+%d")
+    matches = list(pattern_re.finditer(result))
+    for match in reversed(matches):  # reversed to maintain positions
+        param_idx = int(match.group(1))
+        constant = int(match.group(2))
+        value = params[param_idx] + constant
+        result = (
+            result[: match.start()]
+            + str(value).encode("ascii")
+            + result[match.end() :]
+        )
+
+    return result
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/trace.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/trace.py
new file mode 100644
index 0000000000000000000000000000000000000000..943ee12f964b29627efc0b1a6629b9fa0504d7a6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/trace.py
@@ -0,0 +1,34 @@
+from __future__ import annotations
+
+import os
+import sys
+
+# types
+if False:
+    from typing import IO
+
+
+trace_file: IO[str] | None = None
+if trace_filename := os.environ.get("PYREPL_TRACE"):
+    trace_file = open(trace_filename, "a")
+
+
+
+if sys.platform == "emscripten":
+    from posix import _emscripten_log
+
+    def trace(line: str, *k: object, **kw: object) -> None:
+        if "PYREPL_TRACE" not in os.environ:
+            return
+        if k or kw:
+            line = line.format(*k, **kw)
+        _emscripten_log(line)
+
+else:
+    def trace(line: str, *k: object, **kw: object) -> None:
+        if trace_file is None:
+            return
+        if k or kw:
+            line = line.format(*k, **kw)
+        trace_file.write(line + "\n")
+        trace_file.flush()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/types.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/types.py
new file mode 100644
index 0000000000000000000000000000000000000000..c5b7ebc1a406bdf43b9bf85ad21ec06db1522f6b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/types.py
@@ -0,0 +1,10 @@
+from collections.abc import Callable, Iterator
+
+type Callback = Callable[[], object]
+type SimpleContextManager = Iterator[None]
+type KeySpec = str  # like r"\C-c"
+type CommandName = str  # like "interrupt"
+type EventTuple = tuple[CommandName, str]
+type Completer = Callable[[str, int], str | None]
+type CharBuffer = list[str]
+type CharWidths = list[int]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_console.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_console.py
new file mode 100644
index 0000000000000000000000000000000000000000..937b5df6ff7d4c37fe4244d54effedb3542e8306
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_console.py
@@ -0,0 +1,843 @@
+#   Copyright 2000-2010 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Antonio Cuni
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+import errno
+import os
+import re
+import select
+import signal
+import struct
+import termios
+import time
+import types
+import platform
+from fcntl import ioctl
+
+from . import terminfo
+from .console import Console, Event
+from .fancy_termios import tcgetattr, tcsetattr, TermState
+from .trace import trace
+from .unix_eventqueue import EventQueue
+from .utils import wlen
+
+# declare posix optional to allow None assignment on other platforms
+posix: types.ModuleType | None
+try:
+    import posix
+except ImportError:
+    posix = None
+
+TYPE_CHECKING = False
+
+# types
+if TYPE_CHECKING:
+    from typing import AbstractSet, IO, Literal, overload, cast
+else:
+    overload = lambda func: None
+    cast = lambda typ, val: val
+
+
+class InvalidTerminal(RuntimeError):
+    def __init__(self, message: str) -> None:
+        super().__init__(errno.EIO, message)
+
+
+_error = (termios.error, InvalidTerminal)
+_error_codes_to_ignore = frozenset([errno.EIO, errno.ENXIO, errno.EPERM])
+
+SIGWINCH_EVENT = "repaint"
+
+FIONREAD = getattr(termios, "FIONREAD", None)
+TIOCGWINSZ = getattr(termios, "TIOCGWINSZ", None)
+
+# ------------ start of baudrate definitions ------------
+
+# Add (possibly) missing baudrates (check termios man page) to termios
+
+
+def add_baudrate_if_supported(dictionary: dict[int, int], rate: int) -> None:
+    baudrate_name = "B%d" % rate
+    if hasattr(termios, baudrate_name):
+        dictionary[getattr(termios, baudrate_name)] = rate
+
+
+# Check the termios man page (Line speed) to know where these
+# values come from.
+potential_baudrates = [
+    0,
+    110,
+    115200,
+    1200,
+    134,
+    150,
+    1800,
+    19200,
+    200,
+    230400,
+    2400,
+    300,
+    38400,
+    460800,
+    4800,
+    50,
+    57600,
+    600,
+    75,
+    9600,
+]
+
+ratedict: dict[int, int] = {}
+for rate in potential_baudrates:
+    add_baudrate_if_supported(ratedict, rate)
+
+# Clean up variables to avoid unintended usage
+del rate, add_baudrate_if_supported
+
+# ------------ end of baudrate definitions ------------
+
+delayprog = re.compile(b"\\$<([0-9]+)((?:/|\\*){0,2})>")
+
+try:
+    poll: type[select.poll] = select.poll
+except AttributeError:
+    # this is exactly the minimum necessary to support what we
+    # do with poll objects
+    class MinimalPoll:
+        def __init__(self):
+            pass
+
+        def register(self, fd, flag):
+            self.fd = fd
+
+        # note: The 'timeout' argument is received as *milliseconds*
+        def poll(self, timeout: float | None = None) -> list[int]:
+            if timeout is None:
+                r, w, e = select.select([self.fd], [], [])
+            else:
+                r, w, e = select.select([self.fd], [], [], timeout / 1000)
+            return r
+
+    poll = MinimalPoll  # type: ignore[assignment]
+
+
+class UnixConsole(Console):
+    def __init__(
+        self,
+        f_in: IO[bytes] | int = 0,
+        f_out: IO[bytes] | int = 1,
+        term: str = "",
+        encoding: str = "",
+    ):
+        """
+        Initialize the UnixConsole.
+
+        Parameters:
+        - f_in (int or file-like object): Input file descriptor or object.
+        - f_out (int or file-like object): Output file descriptor or object.
+        - term (str): Terminal name.
+        - encoding (str): Encoding to use for I/O operations.
+        """
+        super().__init__(f_in, f_out, term, encoding)
+
+        self.pollob = poll()
+        self.pollob.register(self.input_fd, select.POLLIN)
+        self.terminfo = terminfo.TermInfo(term or None)
+        self.term = term
+        self.is_apple_terminal = (
+            platform.system() == "Darwin"
+            and os.getenv("TERM_PROGRAM") == "Apple_Terminal"
+        )
+
+        try:
+            self.__input_fd_set(tcgetattr(self.input_fd), ignore=frozenset())
+        except _error as e:
+            raise RuntimeError(f"termios failure ({e.args[1]})")
+
+        @overload
+        def _my_getstr(
+            cap: str, optional: Literal[False] = False
+        ) -> bytes: ...
+
+        @overload
+        def _my_getstr(cap: str, optional: bool) -> bytes | None: ...
+
+        def _my_getstr(cap: str, optional: bool = False) -> bytes | None:
+            r = self.terminfo.get(cap)
+            if not optional and r is None:
+                raise InvalidTerminal(
+                    f"terminal doesn't have the required {cap} capability"
+                )
+            return r
+
+        self._bel = _my_getstr("bel")
+        self._civis = _my_getstr("civis", optional=True)
+        self._clear = _my_getstr("clear")
+        self._cnorm = _my_getstr("cnorm", optional=True)
+        self._cub = _my_getstr("cub", optional=True)
+        self._cub1 = _my_getstr("cub1", optional=True)
+        self._cud = _my_getstr("cud", optional=True)
+        self._cud1 = _my_getstr("cud1", optional=True)
+        self._cuf = _my_getstr("cuf", optional=True)
+        self._cuf1 = _my_getstr("cuf1", optional=True)
+        self._cup = _my_getstr("cup")
+        self._cuu = _my_getstr("cuu", optional=True)
+        self._cuu1 = _my_getstr("cuu1", optional=True)
+        self._dch1 = _my_getstr("dch1", optional=True)
+        self._dch = _my_getstr("dch", optional=True)
+        self._el = _my_getstr("el")
+        self._hpa = _my_getstr("hpa", optional=True)
+        self._ich = _my_getstr("ich", optional=True)
+        self._ich1 = _my_getstr("ich1", optional=True)
+        self._ind = _my_getstr("ind", optional=True)
+        self._pad = _my_getstr("pad", optional=True)
+        self._ri = _my_getstr("ri", optional=True)
+        self._rmkx = _my_getstr("rmkx", optional=True)
+        self._smkx = _my_getstr("smkx", optional=True)
+
+        self.__setup_movement()
+
+        self.event_queue = EventQueue(
+            self.input_fd, self.encoding, self.terminfo
+        )
+        self.cursor_visible = 1
+
+        signal.signal(signal.SIGCONT, self._sigcont_handler)
+
+    def _sigcont_handler(self, signum, frame):
+        self.restore()
+        self.prepare()
+
+    def __read(self, n: int) -> bytes:
+        return os.read(self.input_fd, n)
+
+    def change_encoding(self, encoding: str) -> None:
+        """
+        Change the encoding used for I/O operations.
+
+        Parameters:
+        - encoding (str): New encoding to use.
+        """
+        self.encoding = encoding
+
+    def refresh(self, screen, c_xy):
+        """
+        Refresh the console screen.
+
+        Parameters:
+        - screen (list): List of strings representing the screen contents.
+        - c_xy (tuple): Cursor position (x, y) on the screen.
+        """
+        cx, cy = c_xy
+        if not self.__gone_tall:
+            while len(self.screen) < min(len(screen), self.height):
+                self.__hide_cursor()
+                if self.screen:
+                    self.__move(0, len(self.screen) - 1)
+                    self.__write("\n")
+                self.posxy = 0, len(self.screen)
+                self.screen.append("")
+        else:
+            while len(self.screen) < len(screen):
+                self.screen.append("")
+
+        if len(screen) > self.height:
+            self.__gone_tall = 1
+            self.__move = self.__move_tall
+
+        px, py = self.posxy
+        old_offset = offset = self.__offset
+        height = self.height
+
+        # we make sure the cursor is on the screen, and that we're
+        # using all of the screen if we can
+        if cy < offset:
+            offset = cy
+        elif cy >= offset + height:
+            offset = cy - height + 1
+        elif offset > 0 and len(screen) < offset + height:
+            offset = max(len(screen) - height, 0)
+            screen.append("")
+
+        oldscr = self.screen[old_offset : old_offset + height]
+        newscr = screen[offset : offset + height]
+
+        # use hardware scrolling if we have it.
+        if old_offset > offset and self._ri:
+            self.__hide_cursor()
+            self.__write_code(self._cup, 0, 0)
+            self.posxy = 0, old_offset
+            for i in range(old_offset - offset):
+                self.__write_code(self._ri)
+                oldscr.pop(-1)
+                oldscr.insert(0, "")
+        elif old_offset < offset and self._ind:
+            self.__hide_cursor()
+            self.__write_code(self._cup, self.height - 1, 0)
+            self.posxy = 0, old_offset + self.height - 1
+            for i in range(offset - old_offset):
+                self.__write_code(self._ind)
+                oldscr.pop(0)
+                oldscr.append("")
+
+        self.__offset = offset
+
+        for (
+            y,
+            oldline,
+            newline,
+        ) in zip(range(offset, offset + height), oldscr, newscr):
+            if oldline != newline:
+                self.__write_changed_line(y, oldline, newline, px)
+
+        y = len(newscr)
+        while y < len(oldscr):
+            self.__hide_cursor()
+            self.__move(0, y)
+            self.posxy = 0, y
+            self.__write_code(self._el)
+            y += 1
+
+        self.__show_cursor()
+
+        self.screen = screen.copy()
+        self.move_cursor(cx, cy)
+        self.flushoutput()
+
+    def move_cursor(self, x, y):
+        """
+        Move the cursor to the specified position on the screen.
+
+        Parameters:
+        - x (int): X coordinate.
+        - y (int): Y coordinate.
+        """
+        if y < self.__offset or y >= self.__offset + self.height:
+            self.event_queue.insert(Event("scroll", None))
+        else:
+            self.__move(x, y)
+            self.posxy = x, y
+            self.flushoutput()
+
+    def prepare(self):
+        """
+        Prepare the console for input/output operations.
+        """
+        self.__buffer = []
+
+        self.__svtermstate = tcgetattr(self.input_fd)
+        raw = self.__svtermstate.copy()
+        raw.iflag &= ~(termios.INPCK | termios.ISTRIP | termios.IXON)
+        raw.oflag &= ~(termios.OPOST)
+        raw.cflag &= ~(termios.CSIZE | termios.PARENB)
+        raw.cflag |= termios.CS8
+        raw.iflag |= termios.BRKINT
+        raw.lflag &= ~(termios.ICANON | termios.ECHO | termios.IEXTEN)
+        raw.lflag |= termios.ISIG
+        raw.cc[termios.VMIN] = 1
+        raw.cc[termios.VTIME] = 0
+        self.__input_fd_set(raw)
+
+        # In macOS terminal we need to deactivate line wrap via ANSI escape code
+        if self.is_apple_terminal:
+            os.write(self.output_fd, b"\033[?7l")
+
+        self.screen = []
+        self.height, self.width = self.getheightwidth()
+
+        self.posxy = 0, 0
+        self.__gone_tall = 0
+        self.__move = self.__move_short
+        self.__offset = 0
+
+        self.__maybe_write_code(self._smkx)
+
+        try:
+            self.old_sigwinch = signal.signal(signal.SIGWINCH, self.__sigwinch)
+        except ValueError:
+            pass
+
+        self.__enable_bracketed_paste()
+
+    def restore(self):
+        """
+        Restore the console to the default state
+        """
+        self.__disable_bracketed_paste()
+        self.__maybe_write_code(self._rmkx)
+        self.flushoutput()
+        self.__input_fd_set(self.__svtermstate)
+
+        if self.is_apple_terminal:
+            os.write(self.output_fd, b"\033[?7h")
+
+        if hasattr(self, "old_sigwinch"):
+            try:
+                signal.signal(signal.SIGWINCH, self.old_sigwinch)
+            except ValueError as e:
+                import threading
+                if threading.current_thread() is threading.main_thread():
+                    raise e
+            del self.old_sigwinch
+
+    def push_char(self, char: int | bytes) -> None:
+        """
+        Push a character to the console event queue.
+        """
+        trace("push char {char!r}", char=char)
+        self.event_queue.push(char)
+
+    def get_event(self, block: bool = True) -> Event | None:
+        """
+        Get an event from the console event queue.
+
+        Parameters:
+        - block (bool): Whether to block until an event is available.
+
+        Returns:
+        - Event: Event object from the event queue.
+        """
+        if not block and not self.wait(timeout=0):
+            return None
+
+        while self.event_queue.empty():
+            while True:
+                try:
+                    self.push_char(self.__read(1))
+                except OSError as err:
+                    if err.errno == errno.EINTR:
+                        if not self.event_queue.empty():
+                            return self.event_queue.get()
+                        else:
+                            continue
+                    elif err.errno == errno.EIO:
+                        raise SystemExit(errno.EIO)
+                    else:
+                        raise
+                else:
+                    break
+        return self.event_queue.get()
+
+    def wait(self, timeout: float | None = None) -> bool:
+        """
+        Wait for events on the console.
+        """
+        return (
+            not self.event_queue.empty()
+            or bool(self.pollob.poll(timeout))
+        )
+
+    def set_cursor_vis(self, visible):
+        """
+        Set the visibility of the cursor.
+
+        Parameters:
+        - visible (bool): Visibility flag.
+        """
+        if visible:
+            self.__show_cursor()
+        else:
+            self.__hide_cursor()
+
+    if TIOCGWINSZ:
+
+        def getheightwidth(self):
+            """
+            Get the height and width of the console.
+
+            Returns:
+            - tuple: Height and width of the console.
+            """
+            try:
+                return int(os.environ["LINES"]), int(os.environ["COLUMNS"])
+            except (KeyError, TypeError, ValueError):
+                try:
+                    size = ioctl(self.input_fd, TIOCGWINSZ, b"\000" * 8)
+                except OSError:
+                    return 25, 80
+                height, width = struct.unpack("hhhh", size)[0:2]
+                if not height:
+                    return 25, 80
+                return height, width
+
+    else:
+
+        def getheightwidth(self):
+            """
+            Get the height and width of the console.
+
+            Returns:
+            - tuple: Height and width of the console.
+            """
+            try:
+                return int(os.environ["LINES"]), int(os.environ["COLUMNS"])
+            except (KeyError, TypeError, ValueError):
+                return 25, 80
+
+    def forgetinput(self):
+        """
+        Discard any pending input on the console.
+        """
+        termios.tcflush(self.input_fd, termios.TCIFLUSH)
+
+    def flushoutput(self):
+        """
+        Flush the output buffer.
+        """
+        for text, iscode in self.__buffer:
+            if iscode:
+                self.__tputs(text)
+            else:
+                os.write(self.output_fd, text.encode(self.encoding, "replace"))
+        del self.__buffer[:]
+
+    def finish(self):
+        """
+        Finish console operations and flush the output buffer.
+        """
+        y = len(self.screen) - 1
+        while y >= 0 and not self.screen[y]:
+            y -= 1
+        self.__move(0, min(y, self.height + self.__offset - 1))
+        self.__write("\n\r")
+        self.flushoutput()
+
+    def beep(self):
+        """
+        Emit a beep sound.
+        """
+        self.__maybe_write_code(self._bel)
+        self.flushoutput()
+
+    if FIONREAD:
+
+        def getpending(self):
+            """
+            Get pending events from the console event queue.
+
+            Returns:
+            - Event: Pending event from the event queue.
+            """
+            e = Event("key", "", b"")
+
+            while not self.event_queue.empty():
+                e2 = self.event_queue.get()
+                e.data += e2.data
+                e.raw += e.raw
+
+            amount = struct.unpack("i", ioctl(self.input_fd, FIONREAD, b"\0\0\0\0"))[0]
+            trace("getpending({a})", a=amount)
+            raw = self.__read(amount)
+            data = str(raw, self.encoding, "replace")
+            e.data += data
+            e.raw += raw
+            return e
+
+    else:
+
+        def getpending(self):
+            """
+            Get pending events from the console event queue.
+
+            Returns:
+            - Event: Pending event from the event queue.
+            """
+            e = Event("key", "", b"")
+
+            while not self.event_queue.empty():
+                e2 = self.event_queue.get()
+                e.data += e2.data
+                e.raw += e.raw
+
+            amount = 10000
+            raw = self.__read(amount)
+            data = str(raw, self.encoding, "replace")
+            e.data += data
+            e.raw += raw
+            return e
+
+    def clear(self):
+        """
+        Clear the console screen.
+        """
+        self.__write_code(self._clear)
+        self.__gone_tall = 1
+        self.__move = self.__move_tall
+        self.posxy = 0, 0
+        self.screen = []
+
+    @property
+    def input_hook(self):
+        # avoid inline imports here so the repl doesn't get flooded
+        # with import logging from -X importtime=2
+        if posix is not None and posix._is_inputhook_installed():
+            return posix._inputhook
+
+    def __enable_bracketed_paste(self) -> None:
+        os.write(self.output_fd, b"\x1b[?2004h")
+
+    def __disable_bracketed_paste(self) -> None:
+        os.write(self.output_fd, b"\x1b[?2004l")
+
+    def __setup_movement(self):
+        """
+        Set up the movement functions based on the terminal capabilities.
+        """
+        if 0 and self._hpa:  # hpa don't work in windows telnet :-(
+            self.__move_x = self.__move_x_hpa
+        elif self._cub and self._cuf:
+            self.__move_x = self.__move_x_cub_cuf
+        elif self._cub1 and self._cuf1:
+            self.__move_x = self.__move_x_cub1_cuf1
+        else:
+            raise RuntimeError("insufficient terminal (horizontal)")
+
+        if self._cuu and self._cud:
+            self.__move_y = self.__move_y_cuu_cud
+        elif self._cuu1 and self._cud1:
+            self.__move_y = self.__move_y_cuu1_cud1
+        else:
+            raise RuntimeError("insufficient terminal (vertical)")
+
+        if self._dch1:
+            self.dch1 = self._dch1
+        elif self._dch:
+            self.dch1 = terminfo.tparm(self._dch, 1)
+        else:
+            self.dch1 = None
+
+        if self._ich1:
+            self.ich1 = self._ich1
+        elif self._ich:
+            self.ich1 = terminfo.tparm(self._ich, 1)
+        else:
+            self.ich1 = None
+
+        self.__move = self.__move_short
+
+    def __write_changed_line(self, y, oldline, newline, px_coord):
+        # this is frustrating; there's no reason to test (say)
+        # self.dch1 inside the loop -- but alternative ways of
+        # structuring this function are equally painful (I'm trying to
+        # avoid writing code generators these days...)
+        minlen = min(wlen(oldline), wlen(newline))
+        x_pos = 0
+        x_coord = 0
+
+        px_pos = 0
+        j = 0
+        for c in oldline:
+            if j >= px_coord:
+                break
+            j += wlen(c)
+            px_pos += 1
+
+        # reuse the oldline as much as possible, but stop as soon as we
+        # encounter an ESCAPE, because it might be the start of an escape
+        # sequence
+        while (
+            x_coord < minlen
+            and oldline[x_pos] == newline[x_pos]
+            and newline[x_pos] != "\x1b"
+        ):
+            x_coord += wlen(newline[x_pos])
+            x_pos += 1
+
+        # if we need to insert a single character right after the first detected change
+        if oldline[x_pos:] == newline[x_pos + 1 :] and self.ich1:
+            if (
+                y == self.posxy[1]
+                and x_coord > self.posxy[0]
+                and oldline[px_pos:x_pos] == newline[px_pos + 1 : x_pos + 1]
+            ):
+                x_pos = px_pos
+                x_coord = px_coord
+            character_width = wlen(newline[x_pos])
+            self.__move(x_coord, y)
+            self.__write_code(self.ich1)
+            self.__write(newline[x_pos])
+            self.posxy = x_coord + character_width, y
+
+        # if it's a single character change in the middle of the line
+        elif (
+            x_coord < minlen
+            and oldline[x_pos + 1 :] == newline[x_pos + 1 :]
+            and wlen(oldline[x_pos]) == wlen(newline[x_pos])
+        ):
+            character_width = wlen(newline[x_pos])
+            self.__move(x_coord, y)
+            self.__write(newline[x_pos])
+            self.posxy = x_coord + character_width, y
+
+        # if this is the last character to fit in the line and we edit in the middle of the line
+        elif (
+            self.dch1
+            and self.ich1
+            and wlen(newline) == self.width
+            and x_coord < wlen(newline) - 2
+            and newline[x_pos + 1 : -1] == oldline[x_pos:-2]
+        ):
+            self.__hide_cursor()
+            self.__move(self.width - 2, y)
+            self.posxy = self.width - 2, y
+            self.__write_code(self.dch1)
+
+            character_width = wlen(newline[x_pos])
+            self.__move(x_coord, y)
+            self.__write_code(self.ich1)
+            self.__write(newline[x_pos])
+            self.posxy = character_width + 1, y
+
+        else:
+            self.__hide_cursor()
+            self.__move(x_coord, y)
+            if wlen(oldline) > wlen(newline):
+                self.__write_code(self._el)
+            self.__write(newline[x_pos:])
+            self.posxy = wlen(newline), y
+
+        if "\x1b" in newline:
+            # ANSI escape characters are present, so we can't assume
+            # anything about the position of the cursor.  Moving the cursor
+            # to the left margin should work to get to a known position.
+            self.move_cursor(0, y)
+
+    def __write(self, text):
+        self.__buffer.append((text, 0))
+
+    def __write_code(self, fmt, *args):
+        self.__buffer.append((terminfo.tparm(fmt, *args), 1))
+
+    def __maybe_write_code(self, fmt, *args):
+        if fmt:
+            self.__write_code(fmt, *args)
+
+    def __move_y_cuu1_cud1(self, y):
+        assert self._cud1 is not None
+        assert self._cuu1 is not None
+        dy = y - self.posxy[1]
+        if dy > 0:
+            self.__write_code(dy * self._cud1)
+        elif dy < 0:
+            self.__write_code((-dy) * self._cuu1)
+
+    def __move_y_cuu_cud(self, y):
+        dy = y - self.posxy[1]
+        if dy > 0:
+            self.__write_code(self._cud, dy)
+        elif dy < 0:
+            self.__write_code(self._cuu, -dy)
+
+    def __move_x_hpa(self, x: int) -> None:
+        if x != self.posxy[0]:
+            self.__write_code(self._hpa, x)
+
+    def __move_x_cub1_cuf1(self, x: int) -> None:
+        assert self._cuf1 is not None
+        assert self._cub1 is not None
+        dx = x - self.posxy[0]
+        if dx > 0:
+            self.__write_code(self._cuf1 * dx)
+        elif dx < 0:
+            self.__write_code(self._cub1 * (-dx))
+
+    def __move_x_cub_cuf(self, x: int) -> None:
+        dx = x - self.posxy[0]
+        if dx > 0:
+            self.__write_code(self._cuf, dx)
+        elif dx < 0:
+            self.__write_code(self._cub, -dx)
+
+    def __move_short(self, x, y):
+        self.__move_x(x)
+        self.__move_y(y)
+
+    def __move_tall(self, x, y):
+        assert 0 <= y - self.__offset < self.height, y - self.__offset
+        self.__write_code(self._cup, y - self.__offset, x)
+
+    def __sigwinch(self, signum, frame):
+        self.height, self.width = self.getheightwidth()
+        self.event_queue.insert(Event("resize", None))
+
+    def __hide_cursor(self):
+        if self.cursor_visible:
+            self.__maybe_write_code(self._civis)
+            self.cursor_visible = 0
+
+    def __show_cursor(self):
+        if not self.cursor_visible:
+            self.__maybe_write_code(self._cnorm)
+            self.cursor_visible = 1
+
+    def repaint(self):
+        if not self.__gone_tall:
+            self.posxy = 0, self.posxy[1]
+            self.__write("\r")
+            ns = len(self.screen) * ["\000" * self.width]
+            self.screen = ns
+        else:
+            self.posxy = 0, self.__offset
+            self.__move(0, self.__offset)
+            ns = self.height * ["\000" * self.width]
+            self.screen = ns
+
+    def __tputs(self, fmt, prog=delayprog):
+        """A Python implementation of the curses tputs function; the
+        curses one can't really be wrapped in a sane manner.
+
+        I have the strong suspicion that this is complexity that
+        will never do anyone any good."""
+        # using .get() means that things will blow up
+        # only if the bps is actually needed (which I'm
+        # betting is pretty unlikely)
+        bps = ratedict.get(self.__svtermstate.ospeed)
+        while True:
+            m = prog.search(fmt)
+            if not m:
+                os.write(self.output_fd, fmt)
+                break
+            x, y = m.span()
+            os.write(self.output_fd, fmt[:x])
+            fmt = fmt[y:]
+            delay = int(m.group(1))
+            if b"*" in m.group(2):
+                delay *= self.height
+            if self._pad and bps is not None:
+                nchars = (bps * delay) / 1000
+                os.write(self.output_fd, self._pad * nchars)
+            else:
+                time.sleep(float(delay) / 1000.0)
+
+    def __input_fd_set(
+        self,
+        state: TermState,
+        ignore: AbstractSet[int] = _error_codes_to_ignore,
+    ) -> bool:
+        try:
+            tcsetattr(self.input_fd, termios.TCSADRAIN, state)
+        except termios.error as te:
+            if te.args[0] not in ignore:
+                raise
+            return False
+        else:
+            return True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_eventqueue.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_eventqueue.py
new file mode 100644
index 0000000000000000000000000000000000000000..2a9cca59e7477f7c05b5a457f69d9410603b6231
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/unix_eventqueue.py
@@ -0,0 +1,77 @@
+#   Copyright 2000-2008 Michael Hudson-Doyle <micahel@gmail.com>
+#                       Armin Rigo
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from .terminfo import TermInfo
+from .trace import trace
+from .base_eventqueue import BaseEventQueue
+from termios import tcgetattr, VERASE
+import os
+
+
+# Mapping of human-readable key names to their terminal-specific codes
+TERMINAL_KEYNAMES = {
+    "delete": "kdch1",
+    "down": "kcud1",
+    "end": "kend",
+    "enter": "kent",
+    "home": "khome",
+    "insert": "kich1",
+    "left": "kcub1",
+    "page down": "knp",
+    "page up": "kpp",
+    "right": "kcuf1",
+    "up": "kcuu1",
+}
+
+
+# Function keys F1-F20 mapping
+TERMINAL_KEYNAMES.update(("f%d" % i, "kf%d" % i) for i in range(1, 21))
+
+# Known CTRL-arrow keycodes
+CTRL_ARROW_KEYCODES= {
+    # for xterm, gnome-terminal, xfce terminal, etc.
+    b'\033[1;5D': 'ctrl left',
+    b'\033[1;5C': 'ctrl right',
+    # for rxvt
+    b'\033Od': 'ctrl left',
+    b'\033Oc': 'ctrl right',
+}
+
+def get_terminal_keycodes(ti: TermInfo) -> dict[bytes, str]:
+    """
+    Generates a dictionary mapping terminal keycodes to human-readable names.
+    """
+    keycodes = {}
+    for key, terminal_code in TERMINAL_KEYNAMES.items():
+        keycode = ti.get(terminal_code)
+        trace('key {key} tiname {terminal_code} keycode {keycode!r}', **locals())
+        if keycode:
+            keycodes[keycode] = key
+    keycodes.update(CTRL_ARROW_KEYCODES)
+    return keycodes
+
+
+class EventQueue(BaseEventQueue):
+    def __init__(self, fd: int, encoding: str, ti: TermInfo) -> None:
+        keycodes = get_terminal_keycodes(ti)
+        if os.isatty(fd):
+            backspace = tcgetattr(fd)[6][VERASE]
+            keycodes[backspace] = "backspace"
+        BaseEventQueue.__init__(self, encoding, keycodes)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/utils.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/utils.py
new file mode 100644
index 0000000000000000000000000000000000000000..06cddef851bb4042549f3d26a3d6fe50e70db77c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/utils.py
@@ -0,0 +1,391 @@
+from __future__ import annotations
+import builtins
+import functools
+import keyword
+import re
+import token as T
+import tokenize
+import unicodedata
+import _colorize
+
+from collections import deque
+from io import StringIO
+from tokenize import TokenInfo as TI
+from typing import Iterable, Iterator, Match, NamedTuple, Self
+
+from .types import CharBuffer, CharWidths
+from .trace import trace
+
+ANSI_ESCAPE_SEQUENCE = re.compile(r"\x1b\[[ -@]*[A-~]")
+ZERO_WIDTH_BRACKET = re.compile(r"\x01.*?\x02")
+ZERO_WIDTH_TRANS = str.maketrans({"\x01": "", "\x02": ""})
+IDENTIFIERS_AFTER = {"def", "class"}
+KEYWORD_CONSTANTS = {"True", "False", "None"}
+BUILTINS = {str(name) for name in dir(builtins) if not name.startswith('_')}
+
+
+def THEME(**kwargs):
+    # Not cached: the user can modify the theme inside the interactive session.
+    return _colorize.get_theme(**kwargs).syntax
+
+
+class Span(NamedTuple):
+    """Span indexing that's inclusive on both ends."""
+
+    start: int
+    end: int
+
+    @classmethod
+    def from_re(cls, m: Match[str], group: int | str) -> Self:
+        re_span = m.span(group)
+        return cls(re_span[0], re_span[1] - 1)
+
+    @classmethod
+    def from_token(cls, token: TI, line_len: list[int]) -> Self:
+        end_offset = -1
+        if (token.type in {T.FSTRING_MIDDLE, T.TSTRING_MIDDLE}
+            and token.string.endswith(("{", "}"))):
+            # gh-134158: a visible trailing brace comes from a double brace in input
+            end_offset += 1
+
+        return cls(
+            line_len[token.start[0] - 1] + token.start[1],
+            line_len[token.end[0] - 1] + token.end[1] + end_offset,
+        )
+
+
+class ColorSpan(NamedTuple):
+    span: Span
+    tag: str
+
+
+@functools.cache
+def str_width(c: str) -> int:
+    if ord(c) < 128:
+        return 1
+    # gh-139246 for zero-width joiner and combining characters
+    if unicodedata.combining(c):
+        return 0
+    category = unicodedata.category(c)
+    if category == "Cf" and c != "\u00ad":
+        return 0
+    w = unicodedata.east_asian_width(c)
+    if w in ("N", "Na", "H", "A"):
+        return 1
+    return 2
+
+
+def wlen(s: str) -> int:
+    if len(s) == 1 and s != "\x1a":
+        return str_width(s)
+    length = sum(str_width(i) for i in s)
+    # remove lengths of any escape sequences
+    sequence = ANSI_ESCAPE_SEQUENCE.findall(s)
+    ctrl_z_cnt = s.count("\x1a")
+    return length - sum(len(i) for i in sequence) + ctrl_z_cnt
+
+
+def unbracket(s: str, including_content: bool = False) -> str:
+    r"""Return `s` with \001 and \002 characters removed.
+
+    If `including_content` is True, content between \001 and \002 is also
+    stripped.
+    """
+    if including_content:
+        return ZERO_WIDTH_BRACKET.sub("", s)
+    return s.translate(ZERO_WIDTH_TRANS)
+
+
+def gen_colors(buffer: str) -> Iterator[ColorSpan]:
+    """Returns a list of index spans to color using the given color tag.
+
+    The input `buffer` should be a valid start of a Python code block, i.e.
+    it cannot be a block starting in the middle of a multiline string.
+    """
+    sio = StringIO(buffer)
+    line_lengths = [0] + [len(line) for line in sio.readlines()]
+    # make line_lengths cumulative
+    for i in range(1, len(line_lengths)):
+        line_lengths[i] += line_lengths[i-1]
+
+    sio.seek(0)
+    gen = tokenize.generate_tokens(sio.readline)
+    last_emitted: ColorSpan | None = None
+    try:
+        for color in gen_colors_from_token_stream(gen, line_lengths):
+            yield color
+            last_emitted = color
+    except SyntaxError:
+        return
+    except tokenize.TokenError as te:
+        yield from recover_unterminated_string(
+            te, line_lengths, last_emitted, buffer
+        )
+
+
+def recover_unterminated_string(
+    exc: tokenize.TokenError,
+    line_lengths: list[int],
+    last_emitted: ColorSpan | None,
+    buffer: str,
+) -> Iterator[ColorSpan]:
+    msg, loc = exc.args
+    if loc is None:
+        return
+
+    line_no, column = loc
+
+    if msg.startswith(
+        (
+            "unterminated string literal",
+            "unterminated f-string literal",
+            "unterminated t-string literal",
+            "EOF in multi-line string",
+            "unterminated triple-quoted f-string literal",
+            "unterminated triple-quoted t-string literal",
+        )
+    ):
+        start = line_lengths[line_no - 1] + column - 1
+        end = line_lengths[-1] - 1
+
+        # in case FSTRING_START was already emitted
+        if last_emitted and start <= last_emitted.span.start:
+            trace("before last emitted = {s}", s=start)
+            start = last_emitted.span.end + 1
+
+        span = Span(start, end)
+        trace("yielding span {a} -> {b}", a=span.start, b=span.end)
+        yield ColorSpan(span, "string")
+    else:
+        trace(
+            "unhandled token error({buffer}) = {te}",
+            buffer=repr(buffer),
+            te=str(exc),
+        )
+
+
+def gen_colors_from_token_stream(
+    token_generator: Iterator[TI],
+    line_lengths: list[int],
+) -> Iterator[ColorSpan]:
+    token_window = prev_next_window(token_generator)
+
+    is_def_name = False
+    bracket_level = 0
+    for prev_token, token, next_token in token_window:
+        assert token is not None
+        if token.start == token.end:
+            continue
+
+        match token.type:
+            case (
+                T.STRING
+                | T.FSTRING_START | T.FSTRING_MIDDLE | T.FSTRING_END
+                | T.TSTRING_START | T.TSTRING_MIDDLE | T.TSTRING_END
+            ):
+                span = Span.from_token(token, line_lengths)
+                yield ColorSpan(span, "string")
+            case T.COMMENT:
+                span = Span.from_token(token, line_lengths)
+                yield ColorSpan(span, "comment")
+            case T.NUMBER:
+                span = Span.from_token(token, line_lengths)
+                yield ColorSpan(span, "number")
+            case T.OP:
+                if token.string in "([{":
+                    bracket_level += 1
+                elif token.string in ")]}":
+                    bracket_level -= 1
+                span = Span.from_token(token, line_lengths)
+                yield ColorSpan(span, "op")
+            case T.NAME:
+                if is_def_name:
+                    is_def_name = False
+                    span = Span.from_token(token, line_lengths)
+                    yield ColorSpan(span, "definition")
+                elif keyword.iskeyword(token.string):
+                    span_cls = "keyword"
+                    if token.string in KEYWORD_CONSTANTS:
+                        span_cls = "keyword_constant"
+                    span = Span.from_token(token, line_lengths)
+                    yield ColorSpan(span, span_cls)
+                    if token.string in IDENTIFIERS_AFTER:
+                        is_def_name = True
+                elif (
+                    keyword.issoftkeyword(token.string)
+                    and bracket_level == 0
+                    and is_soft_keyword_used(prev_token, token, next_token)
+                ):
+                    span = Span.from_token(token, line_lengths)
+                    yield ColorSpan(span, "soft_keyword")
+                elif (
+                    token.string in BUILTINS
+                    and not (prev_token and prev_token.exact_type == T.DOT)
+                ):
+                    span = Span.from_token(token, line_lengths)
+                    yield ColorSpan(span, "builtin")
+
+
+keyword_first_sets_match = {"False", "None", "True", "await", "lambda", "not"}
+keyword_first_sets_case = {"False", "None", "True"}
+
+
+def is_soft_keyword_used(*tokens: TI | None) -> bool:
+    """Returns True if the current token is a keyword in this context.
+
+    For the `*tokens` to match anything, they have to be a three-tuple of
+    (previous, current, next).
+    """
+    trace("is_soft_keyword_used{t}", t=tokens)
+    match tokens:
+        case (
+            None | TI(T.NEWLINE) | TI(T.INDENT) | TI(string=":"),
+            TI(string="match"),
+            TI(T.NUMBER | T.STRING | T.FSTRING_START | T.TSTRING_START)
+            | TI(T.OP, string="(" | "*" | "[" | "{" | "~" | "...")
+        ):
+            return True
+        case (
+            None | TI(T.NEWLINE) | TI(T.INDENT) | TI(string=":"),
+            TI(string="match"),
+            TI(T.NAME, string=s)
+        ):
+            if keyword.iskeyword(s):
+                return s in keyword_first_sets_match
+            return True
+        case (
+            None | TI(T.NEWLINE) | TI(T.INDENT) | TI(T.DEDENT) | TI(string=":"),
+            TI(string="case"),
+            TI(T.NUMBER | T.STRING | T.FSTRING_START | T.TSTRING_START)
+            | TI(T.OP, string="(" | "*" | "-" | "[" | "{")
+        ):
+            return True
+        case (
+            None | TI(T.NEWLINE) | TI(T.INDENT) | TI(T.DEDENT) | TI(string=":"),
+            TI(string="case"),
+            TI(T.NAME, string=s)
+        ):
+            if keyword.iskeyword(s):
+                return s in keyword_first_sets_case
+            return True
+        case (TI(string="case"), TI(string="_"), TI(string=":")):
+            return True
+        case (
+            None | TI(T.NEWLINE) | TI(T.INDENT) | TI(T.DEDENT) | TI(string=":"),
+            TI(string="type"),
+            TI(T.NAME, string=s)
+        ):
+            return not keyword.iskeyword(s)
+        case _:
+            return False
+
+
+def disp_str(
+    buffer: str,
+    colors: list[ColorSpan] | None = None,
+    start_index: int = 0,
+    force_color: bool = False,
+) -> tuple[CharBuffer, CharWidths]:
+    r"""Decompose the input buffer into a printable variant with applied colors.
+
+    Returns a tuple of two lists:
+    - the first list is the input buffer, character by character, with color
+      escape codes added (while those codes contain multiple ASCII characters,
+      each code is considered atomic *and is attached for the corresponding
+      visible character*);
+    - the second list is the visible width of each character in the input
+      buffer.
+
+    Note on colors:
+    - The `colors` list, if provided, is partially consumed within. We're using
+      a list and not a generator since we need to hold onto the current
+      unfinished span between calls to disp_str in case of multiline strings.
+    - The `colors` list is computed from the start of the input block. `buffer`
+      is only a subset of that input block, a single line within. This is why
+      we need `start_index` to inform us which position is the start of `buffer`
+      actually within user input. This allows us to match color spans correctly.
+
+    Examples:
+    >>> utils.disp_str("a = 9")
+    (['a', ' ', '=', ' ', '9'], [1, 1, 1, 1, 1])
+
+    >>> line = "while 1:"
+    >>> colors = list(utils.gen_colors(line))
+    >>> utils.disp_str(line, colors=colors)
+    (['\x1b[1;34mw', 'h', 'i', 'l', 'e\x1b[0m', ' ', '1', ':'], [1, 1, 1, 1, 1, 1, 1, 1])
+
+    """
+    chars: CharBuffer = []
+    char_widths: CharWidths = []
+
+    if not buffer:
+        return chars, char_widths
+
+    while colors and colors[0].span.end < start_index:
+        # move past irrelevant spans
+        colors.pop(0)
+
+    theme = THEME(force_color=force_color)
+    pre_color = ""
+    post_color = ""
+    if colors and colors[0].span.start < start_index:
+        # looks like we're continuing a previous color (e.g. a multiline str)
+        pre_color = theme[colors[0].tag]
+
+    for i, c in enumerate(buffer, start_index):
+        if colors and colors[0].span.start == i:  # new color starts now
+            pre_color = theme[colors[0].tag]
+
+        if c == "\x1a":  # CTRL-Z on Windows
+            chars.append(c)
+            char_widths.append(2)
+        elif ord(c) < 128:
+            chars.append(c)
+            char_widths.append(1)
+        elif unicodedata.category(c).startswith("C"):
+            c = r"\u%04x" % ord(c)
+            chars.append(c)
+            char_widths.append(len(c))
+        else:
+            chars.append(c)
+            char_widths.append(str_width(c))
+
+        if colors and colors[0].span.end == i:  # current color ends now
+            post_color = theme.reset
+            colors.pop(0)
+
+        chars[-1] = pre_color + chars[-1] + post_color
+        pre_color = ""
+        post_color = ""
+
+    if colors and colors[0].span.start < i and colors[0].span.end > i:
+        # even though the current color should be continued, reset it for now.
+        # the next call to `disp_str()` will revive it.
+        chars[-1] += theme.reset
+
+    return chars, char_widths
+
+
+def prev_next_window[T](
+    iterable: Iterable[T]
+) -> Iterator[tuple[T | None, ...]]:
+    """Generates three-tuples of (previous, current, next) items.
+
+    On the first iteration previous is None. On the last iteration next
+    is None. In case of exception next is None and the exception is re-raised
+    on a subsequent next() call.
+
+    Inspired by `sliding_window` from `itertools` recipes.
+    """
+
+    iterator = iter(iterable)
+    window = deque((None, next(iterator)), maxlen=3)
+    try:
+        for x in iterator:
+            window.append(x)
+            yield tuple(window)
+    except Exception:
+        raise
+    finally:
+        window.append(None)
+        yield tuple(window)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_console.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_console.py
new file mode 100644
index 0000000000000000000000000000000000000000..46c6030748b8a6b80e384515952847d7ddc781c6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_console.py
@@ -0,0 +1,730 @@
+#   Copyright 2000-2004 Michael Hudson-Doyle <micahel@gmail.com>
+#
+#                        All Rights Reserved
+#
+#
+# Permission to use, copy, modify, and distribute this software and
+# its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation.
+#
+# THE AUTHOR MICHAEL HUDSON DISCLAIMS ALL WARRANTIES WITH REGARD TO
+# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,
+# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
+# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
+# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+from __future__ import annotations
+
+import io
+import os
+import sys
+
+import ctypes
+import types
+from ctypes.wintypes import (
+    _COORD,
+    WORD,
+    SMALL_RECT,
+    BOOL,
+    HANDLE,
+    CHAR,
+    DWORD,
+    WCHAR,
+    SHORT,
+)
+from ctypes import Structure, POINTER, Union
+from .console import Event, Console
+from .trace import trace
+from .utils import wlen
+from .windows_eventqueue import EventQueue
+
+try:
+    from ctypes import get_last_error, GetLastError, WinDLL, windll, WinError  # type: ignore[attr-defined]
+except:
+    # Keep MyPy happy off Windows
+    from ctypes import CDLL as WinDLL, cdll as windll
+
+    def GetLastError() -> int:
+        return 42
+
+    def get_last_error() -> int:
+        return 42
+
+    class WinError(OSError):  # type: ignore[no-redef]
+        def __init__(self, err: int | None, descr: str | None = None) -> None:
+            self.err = err
+            self.descr = descr
+
+# declare nt optional to allow None assignment on other platforms
+nt: types.ModuleType | None
+try:
+    import nt
+except ImportError:
+    nt = None
+
+TYPE_CHECKING = False
+
+if TYPE_CHECKING:
+    from typing import IO
+
+# Virtual-Key Codes: https://learn.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
+VK_MAP: dict[int, str] = {
+    0x23: "end",  # VK_END
+    0x24: "home",  # VK_HOME
+    0x25: "left",  # VK_LEFT
+    0x26: "up",  # VK_UP
+    0x27: "right",  # VK_RIGHT
+    0x28: "down",  # VK_DOWN
+    0x2E: "delete",  # VK_DELETE
+    0x70: "f1",  # VK_F1
+    0x71: "f2",  # VK_F2
+    0x72: "f3",  # VK_F3
+    0x73: "f4",  # VK_F4
+    0x74: "f5",  # VK_F5
+    0x75: "f6",  # VK_F6
+    0x76: "f7",  # VK_F7
+    0x77: "f8",  # VK_F8
+    0x78: "f9",  # VK_F9
+    0x79: "f10",  # VK_F10
+    0x7A: "f11",  # VK_F11
+    0x7B: "f12",  # VK_F12
+    0x7C: "f13",  # VK_F13
+    0x7D: "f14",  # VK_F14
+    0x7E: "f15",  # VK_F15
+    0x7F: "f16",  # VK_F16
+    0x80: "f17",  # VK_F17
+    0x81: "f18",  # VK_F18
+    0x82: "f19",  # VK_F19
+    0x83: "f20",  # VK_F20
+}
+
+# Virtual terminal output sequences
+# Reference: https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences#output-sequences
+# Check `windows_eventqueue.py` for input sequences
+ERASE_IN_LINE = "\x1b[K"
+MOVE_LEFT = "\x1b[{}D"
+MOVE_RIGHT = "\x1b[{}C"
+MOVE_UP = "\x1b[{}A"
+MOVE_DOWN = "\x1b[{}B"
+CLEAR = "\x1b[H\x1b[J"
+
+# State of control keys: https://learn.microsoft.com/en-us/windows/console/key-event-record-str
+ALT_ACTIVE = 0x01 | 0x02
+CTRL_ACTIVE = 0x04 | 0x08
+
+WAIT_TIMEOUT = 0x102
+WAIT_FAILED = 0xFFFFFFFF
+
+# from winbase.h
+INFINITE = 0xFFFFFFFF
+
+
+class _error(Exception):
+    pass
+
+def _supports_vt():
+    try:
+        return nt._supports_virtual_terminal()
+    except AttributeError:
+        return False
+
+class WindowsConsole(Console):
+    def __init__(
+        self,
+        f_in: IO[bytes] | int = 0,
+        f_out: IO[bytes] | int = 1,
+        term: str = "",
+        encoding: str = "",
+    ):
+        super().__init__(f_in, f_out, term, encoding)
+
+        self.__vt_support = _supports_vt()
+
+        if self.__vt_support:
+            trace('console supports virtual terminal')
+
+        # Save original console modes so we can recover on cleanup.
+        original_input_mode = DWORD()
+        GetConsoleMode(InHandle, original_input_mode)
+        trace(f'saved original input mode 0x{original_input_mode.value:x}')
+        self.__original_input_mode = original_input_mode.value
+
+        SetConsoleMode(
+            OutHandle,
+            ENABLE_WRAP_AT_EOL_OUTPUT
+            | ENABLE_PROCESSED_OUTPUT
+            | ENABLE_VIRTUAL_TERMINAL_PROCESSING,
+        )
+
+        self.screen: list[str] = []
+        self.width = 80
+        self.height = 25
+        self.__offset = 0
+        self.event_queue = EventQueue(encoding)
+        try:
+            self.out = io._WindowsConsoleIO(self.output_fd, "w")  # type: ignore[attr-defined]
+        except ValueError:
+            # Console I/O is redirected, fallback...
+            self.out = None
+
+    def refresh(self, screen: list[str], c_xy: tuple[int, int]) -> None:
+        """
+        Refresh the console screen.
+
+        Parameters:
+        - screen (list): List of strings representing the screen contents.
+        - c_xy (tuple): Cursor position (x, y) on the screen.
+        """
+        cx, cy = c_xy
+
+        while len(self.screen) < min(len(screen), self.height):
+            self._hide_cursor()
+            if self.screen:
+                self._move_relative(0, len(self.screen) - 1)
+                self.__write("\n")
+            self.posxy = 0, len(self.screen)
+            self.screen.append("")
+
+        px, py = self.posxy
+        old_offset = offset = self.__offset
+        height = self.height
+
+        # we make sure the cursor is on the screen, and that we're
+        # using all of the screen if we can
+        if cy < offset:
+            offset = cy
+        elif cy >= offset + height:
+            offset = cy - height + 1
+            scroll_lines = offset - old_offset
+
+            # Scrolling the buffer as the current input is greater than the visible
+            # portion of the window.  We need to scroll the visible portion and the
+            # entire history
+            self._scroll(scroll_lines, self._getscrollbacksize())
+            self.posxy = self.posxy[0], self.posxy[1] + scroll_lines
+            self.__offset += scroll_lines
+
+            for i in range(scroll_lines):
+                self.screen.append("")
+        elif offset > 0 and len(screen) < offset + height:
+            offset = max(len(screen) - height, 0)
+            screen.append("")
+
+        oldscr = self.screen[old_offset : old_offset + height]
+        newscr = screen[offset : offset + height]
+
+        self.__offset = offset
+
+        self._hide_cursor()
+        for (
+            y,
+            oldline,
+            newline,
+        ) in zip(range(offset, offset + height), oldscr, newscr):
+            if oldline != newline:
+                self.__write_changed_line(y, oldline, newline, px)
+
+        y = len(newscr)
+        while y < len(oldscr):
+            self._move_relative(0, y)
+            self.posxy = 0, y
+            self._erase_to_end()
+            y += 1
+
+        self._show_cursor()
+
+        self.screen = screen
+        self.move_cursor(cx, cy)
+
+    @property
+    def input_hook(self):
+        # avoid inline imports here so the repl doesn't get flooded
+        # with import logging from -X importtime=2
+        if nt is not None and nt._is_inputhook_installed():
+            return nt._inputhook
+
+    def __write_changed_line(
+        self, y: int, oldline: str, newline: str, px_coord: int
+    ) -> None:
+        # this is frustrating; there's no reason to test (say)
+        # self.dch1 inside the loop -- but alternative ways of
+        # structuring this function are equally painful (I'm trying to
+        # avoid writing code generators these days...)
+        minlen = min(wlen(oldline), wlen(newline))
+        x_pos = 0
+        x_coord = 0
+
+        px_pos = 0
+        j = 0
+        for c in oldline:
+            if j >= px_coord:
+                break
+            j += wlen(c)
+            px_pos += 1
+
+        # reuse the oldline as much as possible, but stop as soon as we
+        # encounter an ESCAPE, because it might be the start of an escape
+        # sequence
+        while (
+            x_coord < minlen
+            and oldline[x_pos] == newline[x_pos]
+            and newline[x_pos] != "\x1b"
+        ):
+            x_coord += wlen(newline[x_pos])
+            x_pos += 1
+
+        self._hide_cursor()
+        self._move_relative(x_coord, y)
+        if wlen(oldline) > wlen(newline):
+            self._erase_to_end()
+
+        self.__write(newline[x_pos:])
+        self.posxy = min(wlen(newline), self.width - 1), y
+
+        if "\x1b" in newline or y != self.posxy[1] or '\x1a' in newline:
+            # ANSI escape characters are present, so we can't assume
+            # anything about the position of the cursor.  Moving the cursor
+            # to the left margin should work to get to a known position.
+            self.move_cursor(0, y)
+
+    def _scroll(
+        self, top: int, bottom: int, left: int | None = None, right: int | None = None
+    ) -> None:
+        scroll_rect = SMALL_RECT()
+        scroll_rect.Top = SHORT(top)
+        scroll_rect.Bottom = SHORT(bottom)
+        scroll_rect.Left = SHORT(0 if left is None else left)
+        scroll_rect.Right = SHORT(
+            self.getheightwidth()[1] - 1 if right is None else right
+        )
+        destination_origin = _COORD()
+        fill_info = CHAR_INFO()
+        fill_info.UnicodeChar = " "
+
+        if not ScrollConsoleScreenBuffer(
+            OutHandle, scroll_rect, None, destination_origin, fill_info
+        ):
+            raise WinError(GetLastError())
+
+    def _hide_cursor(self):
+        self.__write("\x1b[?25l")
+
+    def _show_cursor(self):
+        self.__write("\x1b[?25h")
+
+    def _enable_blinking(self):
+        self.__write("\x1b[?12h")
+
+    def _disable_blinking(self):
+        self.__write("\x1b[?12l")
+
+    def _enable_bracketed_paste(self) -> None:
+        self.__write("\x1b[?2004h")
+
+    def _disable_bracketed_paste(self) -> None:
+        self.__write("\x1b[?2004l")
+
+    def __write(self, text: str) -> None:
+        if "\x1a" in text:
+            text = ''.join(["^Z" if x == '\x1a' else x for x in text])
+
+        if self.out is not None:
+            self.out.write(text.encode(self.encoding, "replace"))
+            self.out.flush()
+        else:
+            os.write(self.output_fd, text.encode(self.encoding, "replace"))
+
+    @property
+    def screen_xy(self) -> tuple[int, int]:
+        info = CONSOLE_SCREEN_BUFFER_INFO()
+        if not GetConsoleScreenBufferInfo(OutHandle, info):
+            raise WinError(GetLastError())
+        return info.dwCursorPosition.X, info.dwCursorPosition.Y
+
+    def _erase_to_end(self) -> None:
+        self.__write(ERASE_IN_LINE)
+
+    def prepare(self) -> None:
+        trace("prepare")
+        self.screen = []
+        self.height, self.width = self.getheightwidth()
+
+        self.posxy = 0, 0
+        self.__gone_tall = 0
+        self.__offset = 0
+
+        if self.__vt_support:
+            SetConsoleMode(InHandle, self.__original_input_mode | ENABLE_VIRTUAL_TERMINAL_INPUT)
+            self._enable_bracketed_paste()
+
+    def restore(self) -> None:
+        if self.__vt_support:
+            # Recover to original mode before running REPL
+            self._disable_bracketed_paste()
+            SetConsoleMode(InHandle, self.__original_input_mode)
+
+    def _move_relative(self, x: int, y: int) -> None:
+        """Moves relative to the current posxy"""
+        dx = x - self.posxy[0]
+        dy = y - self.posxy[1]
+        if dx < 0:
+            self.__write(MOVE_LEFT.format(-dx))
+        elif dx > 0:
+            self.__write(MOVE_RIGHT.format(dx))
+
+        if dy < 0:
+            self.__write(MOVE_UP.format(-dy))
+        elif dy > 0:
+            self.__write(MOVE_DOWN.format(dy))
+
+    def move_cursor(self, x: int, y: int) -> None:
+        if x < 0 or y < 0:
+            raise ValueError(f"Bad cursor position {x}, {y}")
+
+        if y < self.__offset or y >= self.__offset + self.height:
+            self.event_queue.insert(Event("scroll", ""))
+        else:
+            self._move_relative(x, y)
+            self.posxy = x, y
+
+    def set_cursor_vis(self, visible: bool) -> None:
+        if visible:
+            self._show_cursor()
+        else:
+            self._hide_cursor()
+
+    def getheightwidth(self) -> tuple[int, int]:
+        """Return (height, width) where height and width are the height
+        and width of the terminal window in characters."""
+        info = CONSOLE_SCREEN_BUFFER_INFO()
+        if not GetConsoleScreenBufferInfo(OutHandle, info):
+            raise WinError(GetLastError())
+        return (
+            info.srWindow.Bottom - info.srWindow.Top + 1,
+            info.srWindow.Right - info.srWindow.Left + 1,
+        )
+
+    def _getscrollbacksize(self) -> int:
+        info = CONSOLE_SCREEN_BUFFER_INFO()
+        if not GetConsoleScreenBufferInfo(OutHandle, info):
+            raise WinError(GetLastError())
+
+        return info.srWindow.Bottom  # type: ignore[no-any-return]
+
+    def _read_input(self) -> INPUT_RECORD | None:
+        rec = INPUT_RECORD()
+        read = DWORD()
+        if not ReadConsoleInput(InHandle, rec, 1, read):
+            raise WinError(GetLastError())
+
+        return rec
+
+    def _read_input_bulk(
+        self, n: int
+    ) -> tuple[ctypes.Array[INPUT_RECORD], int]:
+        rec = (n * INPUT_RECORD)()
+        read = DWORD()
+        if not ReadConsoleInput(InHandle, rec, n, read):
+            raise WinError(GetLastError())
+
+        return rec, read.value
+
+    def get_event(self, block: bool = True) -> Event | None:
+        """Return an Event instance.  Returns None if |block| is false
+        and there is no event pending, otherwise waits for the
+        completion of an event."""
+
+        if not block and not self.wait(timeout=0):
+            return None
+
+        while self.event_queue.empty():
+            rec = self._read_input()
+            if rec is None:
+                return None
+
+            if rec.EventType == WINDOW_BUFFER_SIZE_EVENT:
+                return Event("resize", "")
+
+            if rec.EventType != KEY_EVENT or not rec.Event.KeyEvent.bKeyDown:
+                # Only process keys and keydown events
+                if block:
+                    continue
+                return None
+
+            key_event = rec.Event.KeyEvent
+            raw_key = key = key_event.uChar.UnicodeChar
+
+            if key == "\r":
+                # Make enter unix-like
+                return Event(evt="key", data="\n")
+            elif key_event.wVirtualKeyCode == 8:
+                # Turn backspace directly into the command
+                key = "backspace"
+            elif key == "\x00":
+                # Handle special keys like arrow keys and translate them into the appropriate command
+                key = VK_MAP.get(key_event.wVirtualKeyCode)
+                if key:
+                    if key_event.dwControlKeyState & CTRL_ACTIVE:
+                        key = f"ctrl {key}"
+                    elif key_event.dwControlKeyState & ALT_ACTIVE:
+                        # queue the key, return the meta command
+                        self.event_queue.insert(Event(evt="key", data=key))
+                        return Event(evt="key", data="\033")  # keymap.py uses this for meta
+                    return Event(evt="key", data=key)
+                if block:
+                    continue
+
+                return None
+            elif self.__vt_support:
+                # If virtual terminal is enabled, scanning VT sequences
+                for char in raw_key.encode(self.event_queue.encoding, "replace"):
+                    self.event_queue.push(char)
+                continue
+
+            if key_event.dwControlKeyState & ALT_ACTIVE:
+                # Do not swallow characters that have been entered via AltGr:
+                # Windows internally converts AltGr to CTRL+ALT, see
+                # https://learn.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-vkkeyscanw
+                if not key_event.dwControlKeyState & CTRL_ACTIVE:
+                    # queue the key, return the meta command
+                    self.event_queue.insert(Event(evt="key", data=key))
+                    return Event(evt="key", data="\033")  # keymap.py uses this for meta
+
+            return Event(evt="key", data=key)
+        return self.event_queue.get()
+
+    def push_char(self, char: int | bytes) -> None:
+        """
+        Push a character to the console event queue.
+        """
+        raise NotImplementedError("push_char not supported on Windows")
+
+    def beep(self) -> None:
+        self.__write("\x07")
+
+    def clear(self) -> None:
+        """Wipe the screen"""
+        self.__write(CLEAR)
+        self.posxy = 0, 0
+        self.screen = []
+
+    def finish(self) -> None:
+        """Move the cursor to the end of the display and otherwise get
+        ready for end.  XXX could be merged with restore?  Hmm."""
+        y = len(self.screen) - 1
+        while y >= 0 and not self.screen[y]:
+            y -= 1
+        self._move_relative(0, min(y, self.height + self.__offset - 1))
+        self.__write("\r\n")
+
+    def flushoutput(self) -> None:
+        """Flush all output to the screen (assuming there's some
+        buffering going on somewhere).
+
+        All output on Windows is unbuffered so this is a nop"""
+        pass
+
+    def forgetinput(self) -> None:
+        """Forget all pending, but not yet processed input."""
+        if not FlushConsoleInputBuffer(InHandle):
+            raise WinError(GetLastError())
+
+    def getpending(self) -> Event:
+        """Return the characters that have been typed but not yet
+        processed."""
+        e = Event("key", "", b"")
+
+        while not self.event_queue.empty():
+            e2 = self.event_queue.get()
+            if e2:
+                e.data += e2.data
+
+        recs, rec_count = self._read_input_bulk(1024)
+        for i in range(rec_count):
+            rec = recs[i]
+            # In case of a legacy console, we do not only receive a keydown
+            # event, but also a keyup event - and for uppercase letters
+            # an additional SHIFT_PRESSED event.
+            if rec and rec.EventType == KEY_EVENT:
+                key_event = rec.Event.KeyEvent
+                if not key_event.bKeyDown:
+                    continue
+                ch = key_event.uChar.UnicodeChar
+                if ch == "\x00":
+                    # ignore SHIFT_PRESSED and special keys
+                    continue
+                if ch == "\r":
+                    ch += "\n"
+                e.data += ch
+        return e
+
+    def wait_for_event(self, timeout: float | None) -> bool:
+        """Wait for an event."""
+        if timeout is None:
+            timeout = INFINITE
+        else:
+            timeout = int(timeout)
+        ret = WaitForSingleObject(InHandle, timeout)
+        if ret == WAIT_FAILED:
+            raise WinError(get_last_error())
+        elif ret == WAIT_TIMEOUT:
+            return False
+        return True
+
+    def wait(self, timeout: float | None) -> bool:
+        """
+        Wait for events on the console.
+        """
+        return (
+            not self.event_queue.empty()
+            or self.wait_for_event(timeout)
+        )
+
+    def repaint(self) -> None:
+        raise NotImplementedError("No repaint support")
+
+
+# Windows interop
+class CONSOLE_SCREEN_BUFFER_INFO(Structure):
+    _fields_ = [
+        ("dwSize", _COORD),
+        ("dwCursorPosition", _COORD),
+        ("wAttributes", WORD),
+        ("srWindow", SMALL_RECT),
+        ("dwMaximumWindowSize", _COORD),
+    ]
+
+
+class CONSOLE_CURSOR_INFO(Structure):
+    _fields_ = [
+        ("dwSize", DWORD),
+        ("bVisible", BOOL),
+    ]
+
+
+class CHAR_INFO(Structure):
+    _fields_ = [
+        ("UnicodeChar", WCHAR),
+        ("Attributes", WORD),
+    ]
+
+
+class Char(Union):
+    _fields_ = [
+        ("UnicodeChar", WCHAR),
+        ("Char", CHAR),
+    ]
+
+
+class KeyEvent(ctypes.Structure):
+    _fields_ = [
+        ("bKeyDown", BOOL),
+        ("wRepeatCount", WORD),
+        ("wVirtualKeyCode", WORD),
+        ("wVirtualScanCode", WORD),
+        ("uChar", Char),
+        ("dwControlKeyState", DWORD),
+    ]
+
+
+class WindowsBufferSizeEvent(ctypes.Structure):
+    _fields_ = [("dwSize", _COORD)]
+
+
+class ConsoleEvent(ctypes.Union):
+    _fields_ = [
+        ("KeyEvent", KeyEvent),
+        ("WindowsBufferSizeEvent", WindowsBufferSizeEvent),
+    ]
+
+
+class INPUT_RECORD(Structure):
+    _fields_ = [("EventType", WORD), ("Event", ConsoleEvent)]
+
+
+KEY_EVENT = 0x01
+FOCUS_EVENT = 0x10
+MENU_EVENT = 0x08
+MOUSE_EVENT = 0x02
+WINDOW_BUFFER_SIZE_EVENT = 0x04
+
+ENABLE_PROCESSED_INPUT = 0x0001
+ENABLE_LINE_INPUT = 0x0002
+ENABLE_ECHO_INPUT = 0x0004
+ENABLE_MOUSE_INPUT = 0x0010
+ENABLE_INSERT_MODE = 0x0020
+ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200
+
+ENABLE_PROCESSED_OUTPUT = 0x01
+ENABLE_WRAP_AT_EOL_OUTPUT = 0x02
+ENABLE_VIRTUAL_TERMINAL_PROCESSING = 0x04
+
+STD_INPUT_HANDLE = -10
+STD_OUTPUT_HANDLE = -11
+
+if sys.platform == "win32":
+    _KERNEL32 = WinDLL("kernel32", use_last_error=True)
+
+    GetStdHandle = windll.kernel32.GetStdHandle
+    GetStdHandle.argtypes = [DWORD]
+    GetStdHandle.restype = HANDLE
+
+    GetConsoleScreenBufferInfo = _KERNEL32.GetConsoleScreenBufferInfo
+    GetConsoleScreenBufferInfo.argtypes = [
+        HANDLE,
+        ctypes.POINTER(CONSOLE_SCREEN_BUFFER_INFO),
+    ]
+    GetConsoleScreenBufferInfo.restype = BOOL
+
+    ScrollConsoleScreenBuffer = _KERNEL32.ScrollConsoleScreenBufferW
+    ScrollConsoleScreenBuffer.argtypes = [
+        HANDLE,
+        POINTER(SMALL_RECT),
+        POINTER(SMALL_RECT),
+        _COORD,
+        POINTER(CHAR_INFO),
+    ]
+    ScrollConsoleScreenBuffer.restype = BOOL
+
+    GetConsoleMode = _KERNEL32.GetConsoleMode
+    GetConsoleMode.argtypes = [HANDLE, POINTER(DWORD)]
+    GetConsoleMode.restype = BOOL
+
+    SetConsoleMode = _KERNEL32.SetConsoleMode
+    SetConsoleMode.argtypes = [HANDLE, DWORD]
+    SetConsoleMode.restype = BOOL
+
+    ReadConsoleInput = _KERNEL32.ReadConsoleInputW
+    ReadConsoleInput.argtypes = [HANDLE, POINTER(INPUT_RECORD), DWORD, POINTER(DWORD)]
+    ReadConsoleInput.restype = BOOL
+
+
+    FlushConsoleInputBuffer = _KERNEL32.FlushConsoleInputBuffer
+    FlushConsoleInputBuffer.argtypes = [HANDLE]
+    FlushConsoleInputBuffer.restype = BOOL
+
+    WaitForSingleObject = _KERNEL32.WaitForSingleObject
+    WaitForSingleObject.argtypes = [HANDLE, DWORD]
+    WaitForSingleObject.restype = DWORD
+
+    OutHandle = GetStdHandle(STD_OUTPUT_HANDLE)
+    InHandle = GetStdHandle(STD_INPUT_HANDLE)
+else:
+
+    def _win_only(*args, **kwargs):
+        raise NotImplementedError("Windows only")
+
+    GetStdHandle = _win_only
+    GetConsoleScreenBufferInfo = _win_only
+    ScrollConsoleScreenBuffer = _win_only
+    GetConsoleMode = _win_only
+    SetConsoleMode = _win_only
+    ReadConsoleInput = _win_only
+    FlushConsoleInputBuffer = _win_only
+    WaitForSingleObject = _win_only
+    OutHandle = 0
+    InHandle = 0
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_eventqueue.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_eventqueue.py
new file mode 100644
index 0000000000000000000000000000000000000000..d99722f9a16a93a1d1058fc5103d30d6428bc416
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/_pyrepl/windows_eventqueue.py
@@ -0,0 +1,42 @@
+"""
+Windows event and VT sequence scanner
+"""
+
+from .base_eventqueue import BaseEventQueue
+
+
+# Reference: https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences#input-sequences
+VT_MAP: dict[bytes, str] = {
+    b'\x1b[A': 'up',
+    b'\x1b[B': 'down',
+    b'\x1b[C': 'right',
+    b'\x1b[D': 'left',
+    b'\x1b[1;5D': 'ctrl left',
+    b'\x1b[1;5C': 'ctrl right',
+
+    b'\x1b[H': 'home',
+    b'\x1b[F': 'end',
+
+    b'\x7f': 'backspace',
+    b'\x1b[2~': 'insert',
+    b'\x1b[3~': 'delete',
+    b'\x1b[5~': 'page up',
+    b'\x1b[6~': 'page down',
+
+    b'\x1bOP':   'f1',
+    b'\x1bOQ':   'f2',
+    b'\x1bOR':   'f3',
+    b'\x1bOS':   'f4',
+    b'\x1b[15~': 'f5',
+    b'\x1b[17~': 'f6',
+    b'\x1b[18~': 'f7',
+    b'\x1b[19~': 'f8',
+    b'\x1b[20~': 'f9',
+    b'\x1b[21~': 'f10',
+    b'\x1b[23~': 'f11',
+    b'\x1b[24~': 'f12',
+}
+
+class EventQueue(BaseEventQueue):
+    def __init__(self, encoding: str) -> None:
+        BaseEventQueue.__init__(self, encoding, VT_MAP)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..32a5dbae03af2165847da1ff334b6ebb2c3521f9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__init__.py
@@ -0,0 +1,74 @@
+"""The asyncio package, tracking PEP 3156."""
+
+# flake8: noqa
+
+import sys
+
+# This relies on each of the submodules having an __all__ variable.
+from .base_events import *
+from .coroutines import *
+from .events import *
+from .exceptions import *
+from .futures import *
+from .graph import *
+from .locks import *
+from .protocols import *
+from .runners import *
+from .queues import *
+from .streams import *
+from .subprocess import *
+from .tasks import *
+from .taskgroups import *
+from .timeouts import *
+from .threads import *
+from .transports import *
+
+__all__ = (base_events.__all__ +
+           coroutines.__all__ +
+           events.__all__ +
+           exceptions.__all__ +
+           futures.__all__ +
+           graph.__all__ +
+           locks.__all__ +
+           protocols.__all__ +
+           runners.__all__ +
+           queues.__all__ +
+           streams.__all__ +
+           subprocess.__all__ +
+           tasks.__all__ +
+           taskgroups.__all__ +
+           threads.__all__ +
+           timeouts.__all__ +
+           transports.__all__)
+
+if sys.platform == 'win32':  # pragma: no cover
+    from .windows_events import *
+    __all__ += windows_events.__all__
+else:
+    from .unix_events import *  # pragma: no cover
+    __all__ += unix_events.__all__
+
+def __getattr__(name: str):
+    import warnings
+
+    match name:
+        case "AbstractEventLoopPolicy":
+            warnings._deprecated(f"asyncio.{name}", remove=(3, 16))
+            return events._AbstractEventLoopPolicy
+        case "DefaultEventLoopPolicy":
+            warnings._deprecated(f"asyncio.{name}", remove=(3, 16))
+            if sys.platform == 'win32':
+                return windows_events._DefaultEventLoopPolicy
+            return unix_events._DefaultEventLoopPolicy
+        case "WindowsSelectorEventLoopPolicy":
+            if sys.platform == 'win32':
+                warnings._deprecated(f"asyncio.{name}", remove=(3, 16))
+                return windows_events._WindowsSelectorEventLoopPolicy
+            # Else fall through to the AttributeError below.
+        case "WindowsProactorEventLoopPolicy":
+            if sys.platform == 'win32':
+                warnings._deprecated(f"asyncio.{name}", remove=(3, 16))
+                return windows_events._WindowsProactorEventLoopPolicy
+            # Else fall through to the AttributeError below.
+
+    raise AttributeError(f"module {__name__!r} has no attribute {name!r}")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..0e100358022a959ef6ed5f154abee92052612eb6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/__main__.py
@@ -0,0 +1,241 @@
+import argparse
+import ast
+import asyncio
+import asyncio.tools
+import concurrent.futures
+import contextvars
+import inspect
+import os
+import site
+import sys
+import threading
+import types
+import warnings
+
+from _colorize import get_theme
+from _pyrepl.console import InteractiveColoredConsole
+
+from . import futures
+
+
+class AsyncIOInteractiveConsole(InteractiveColoredConsole):
+
+    def __init__(self, locals, loop):
+        super().__init__(locals, filename="<stdin>")
+        self.compile.compiler.flags |= ast.PyCF_ALLOW_TOP_LEVEL_AWAIT
+
+        self.loop = loop
+        self.context = contextvars.copy_context()
+
+    def runcode(self, code):
+        global return_code
+        future = concurrent.futures.Future()
+
+        def callback():
+            global return_code
+            global repl_future
+            global keyboard_interrupted
+
+            repl_future = None
+            keyboard_interrupted = False
+
+            func = types.FunctionType(code, self.locals)
+            try:
+                coro = func()
+            except SystemExit as se:
+                return_code = se.code
+                self.loop.stop()
+                return
+            except KeyboardInterrupt as ex:
+                keyboard_interrupted = True
+                future.set_exception(ex)
+                return
+            except BaseException as ex:
+                future.set_exception(ex)
+                return
+
+            if not inspect.iscoroutine(coro):
+                future.set_result(coro)
+                return
+
+            try:
+                repl_future = self.loop.create_task(coro, context=self.context)
+                futures._chain_future(repl_future, future)
+            except BaseException as exc:
+                future.set_exception(exc)
+
+        self.loop.call_soon_threadsafe(callback, context=self.context)
+
+        try:
+            return future.result()
+        except SystemExit as se:
+            return_code = se.code
+            self.loop.stop()
+            return
+        except BaseException:
+            if keyboard_interrupted:
+                if not CAN_USE_PYREPL:
+                    self.write("\nKeyboardInterrupt\n")
+            else:
+                self.showtraceback()
+            return self.STATEMENT_FAILED
+
+class REPLThread(threading.Thread):
+
+    def run(self):
+        global return_code
+
+        try:
+            if not sys.flags.quiet:
+                banner = (
+                    f'asyncio REPL {sys.version} on {sys.platform}\n'
+                    f'Use "await" directly instead of "asyncio.run()".\n'
+                    f'Type "help", "copyright", "credits" or "license" '
+                    f'for more information.\n'
+                )
+
+                console.write(banner)
+
+            if not sys.flags.isolated and (startup_path := os.getenv("PYTHONSTARTUP")):
+                sys.audit("cpython.run_startup", startup_path)
+
+                import tokenize
+                with tokenize.open(startup_path) as f:
+                    startup_code = compile(f.read(), startup_path, "exec")
+                    exec(startup_code, console.locals)
+
+            ps1 = getattr(sys, "ps1", ">>> ")
+            if CAN_USE_PYREPL:
+                theme = get_theme().syntax
+                ps1 = f"{theme.prompt}{ps1}{theme.reset}"
+            console.write(f"{ps1}import asyncio\n")
+
+            if CAN_USE_PYREPL:
+                from _pyrepl.simple_interact import (
+                    run_multiline_interactive_console,
+                )
+                try:
+                    run_multiline_interactive_console(console)
+                except SystemExit:
+                    # expected via the `exit` and `quit` commands
+                    pass
+                except BaseException:
+                    # unexpected issue
+                    console.showtraceback()
+                    console.write("Internal error, ")
+                    return_code = 1
+            else:
+                console.interact(banner="", exitmsg="")
+        finally:
+            warnings.filterwarnings(
+                'ignore',
+                message=r'^coroutine .* was never awaited$',
+                category=RuntimeWarning)
+
+            loop.call_soon_threadsafe(loop.stop)
+
+    def interrupt(self) -> None:
+        if not CAN_USE_PYREPL:
+            return
+
+        from _pyrepl.simple_interact import _get_reader
+        r = _get_reader()
+        if r.threading_hook is not None:
+            r.threading_hook.add("")  # type: ignore
+
+
+if __name__ == '__main__':
+    parser = argparse.ArgumentParser(
+        prog="python3 -m asyncio",
+        description="Interactive asyncio shell and CLI tools",
+        color=True,
+    )
+    subparsers = parser.add_subparsers(help="sub-commands", dest="command")
+    ps = subparsers.add_parser(
+        "ps", help="Display a table of all pending tasks in a process"
+    )
+    ps.add_argument("pid", type=int, help="Process ID to inspect")
+    pstree = subparsers.add_parser(
+        "pstree", help="Display a tree of all pending tasks in a process"
+    )
+    pstree.add_argument("pid", type=int, help="Process ID to inspect")
+    args = parser.parse_args()
+    match args.command:
+        case "ps":
+            asyncio.tools.display_awaited_by_tasks_table(args.pid)
+            sys.exit(0)
+        case "pstree":
+            asyncio.tools.display_awaited_by_tasks_tree(args.pid)
+            sys.exit(0)
+        case None:
+            pass  # continue to the interactive shell
+        case _:
+            # shouldn't happen as an invalid command-line wouldn't parse
+            # but let's keep it for the next person adding a command
+            print(f"error: unhandled command {args.command}", file=sys.stderr)
+            parser.print_usage(file=sys.stderr)
+            sys.exit(1)
+
+    sys.audit("cpython.run_stdin")
+
+    if os.getenv('PYTHON_BASIC_REPL'):
+        CAN_USE_PYREPL = False
+    else:
+        from _pyrepl.main import CAN_USE_PYREPL
+
+    return_code = 0
+    loop = asyncio.new_event_loop()
+    asyncio.set_event_loop(loop)
+
+    repl_locals = {'asyncio': asyncio}
+    for key in {'__name__', '__package__',
+                '__loader__', '__spec__',
+                '__builtins__', '__file__'}:
+        repl_locals[key] = locals()[key]
+
+    console = AsyncIOInteractiveConsole(repl_locals, loop)
+
+    repl_future = None
+    keyboard_interrupted = False
+
+    try:
+        import readline  # NoQA
+    except ImportError:
+        readline = None
+
+    interactive_hook = getattr(sys, "__interactivehook__", None)
+
+    if interactive_hook is not None:
+        sys.audit("cpython.run_interactivehook", interactive_hook)
+        interactive_hook()
+
+    if interactive_hook is site.register_readline:
+        # Fix the completer function to use the interactive console locals
+        try:
+            import rlcompleter
+        except:
+            pass
+        else:
+            if readline is not None:
+                completer = rlcompleter.Completer(console.locals)
+                readline.set_completer(completer.complete)
+
+    repl_thread = REPLThread(name="Interactive thread")
+    repl_thread.daemon = True
+    repl_thread.start()
+
+    while True:
+        try:
+            loop.run_forever()
+        except KeyboardInterrupt:
+            keyboard_interrupted = True
+            if repl_future and not repl_future.done():
+                repl_future.cancel()
+            repl_thread.interrupt()
+            continue
+        else:
+            break
+
+    console.write('exiting asyncio REPL...\n')
+    loop.close()
+    sys.exit(return_code)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/selector_events.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/selector_events.py
new file mode 100644
index 0000000000000000000000000000000000000000..ff7e16df3c62737a01cba22017ed3eefcc93fac8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/selector_events.py
@@ -0,0 +1,1326 @@
+"""Event loop using a selector and related classes.
+
+A selector is a "notify-when-ready" multiplexer.  For a subclass which
+also includes support for signal handling, see the unix_events sub-module.
+"""
+
+__all__ = 'BaseSelectorEventLoop',
+
+import collections
+import errno
+import functools
+import itertools
+import os
+import selectors
+import socket
+import warnings
+import weakref
+try:
+    import ssl
+except ImportError:  # pragma: no cover
+    ssl = None
+
+from . import base_events
+from . import constants
+from . import events
+from . import futures
+from . import protocols
+from . import sslproto
+from . import transports
+from . import trsock
+from .log import logger
+
+_HAS_SENDMSG = hasattr(socket.socket, 'sendmsg')
+
+if _HAS_SENDMSG:
+    try:
+        SC_IOV_MAX = os.sysconf('SC_IOV_MAX')
+    except OSError:
+        # Fallback to send
+        _HAS_SENDMSG = False
+
+def _test_selector_event(selector, fd, event):
+    # Test if the selector is monitoring 'event' events
+    # for the file descriptor 'fd'.
+    try:
+        key = selector.get_key(fd)
+    except KeyError:
+        return False
+    else:
+        return bool(key.events & event)
+
+
+class BaseSelectorEventLoop(base_events.BaseEventLoop):
+    """Selector event loop.
+
+    See events.EventLoop for API specification.
+    """
+
+    def __init__(self, selector=None):
+        super().__init__()
+
+        if selector is None:
+            selector = selectors.DefaultSelector()
+        logger.debug('Using selector: %s', selector.__class__.__name__)
+        self._selector = selector
+        self._make_self_pipe()
+        self._transports = weakref.WeakValueDictionary()
+
+    def _make_socket_transport(self, sock, protocol, waiter=None, *,
+                               extra=None, server=None):
+        self._ensure_fd_no_transport(sock)
+        return _SelectorSocketTransport(self, sock, protocol, waiter,
+                                        extra, server)
+
+    def _make_ssl_transport(
+            self, rawsock, protocol, sslcontext, waiter=None,
+            *, server_side=False, server_hostname=None,
+            extra=None, server=None,
+            ssl_handshake_timeout=constants.SSL_HANDSHAKE_TIMEOUT,
+            ssl_shutdown_timeout=constants.SSL_SHUTDOWN_TIMEOUT,
+    ):
+        self._ensure_fd_no_transport(rawsock)
+        ssl_protocol = sslproto.SSLProtocol(
+            self, protocol, sslcontext, waiter,
+            server_side, server_hostname,
+            ssl_handshake_timeout=ssl_handshake_timeout,
+            ssl_shutdown_timeout=ssl_shutdown_timeout
+        )
+        _SelectorSocketTransport(self, rawsock, ssl_protocol,
+                                 extra=extra, server=server)
+        return ssl_protocol._app_transport
+
+    def _make_datagram_transport(self, sock, protocol,
+                                 address=None, waiter=None, extra=None):
+        self._ensure_fd_no_transport(sock)
+        return _SelectorDatagramTransport(self, sock, protocol,
+                                          address, waiter, extra)
+
+    def close(self):
+        if self.is_running():
+            raise RuntimeError("Cannot close a running event loop")
+        if self.is_closed():
+            return
+        self._close_self_pipe()
+        super().close()
+        if self._selector is not None:
+            self._selector.close()
+            self._selector = None
+
+    def _close_self_pipe(self):
+        self._remove_reader(self._ssock.fileno())
+        self._ssock.close()
+        self._ssock = None
+        self._csock.close()
+        self._csock = None
+        self._internal_fds -= 1
+
+    def _make_self_pipe(self):
+        # A self-socket, really. :-)
+        self._ssock, self._csock = socket.socketpair()
+        self._ssock.setblocking(False)
+        self._csock.setblocking(False)
+        self._internal_fds += 1
+        self._add_reader(self._ssock.fileno(), self._read_from_self)
+
+    def _process_self_data(self, data):
+        pass
+
+    def _read_from_self(self):
+        while True:
+            try:
+                data = self._ssock.recv(4096)
+                if not data:
+                    break
+                self._process_self_data(data)
+            except InterruptedError:
+                continue
+            except BlockingIOError:
+                break
+
+    def _write_to_self(self):
+        # This may be called from a different thread, possibly after
+        # _close_self_pipe() has been called or even while it is
+        # running.  Guard for self._csock being None or closed.  When
+        # a socket is closed, send() raises OSError (with errno set to
+        # EBADF, but let's not rely on the exact error code).
+        csock = self._csock
+        if csock is None:
+            return
+
+        try:
+            csock.send(b'\0')
+        except OSError:
+            if self._debug:
+                logger.debug("Fail to write a null byte into the "
+                             "self-pipe socket",
+                             exc_info=True)
+
+    def _start_serving(self, protocol_factory, sock,
+                       sslcontext=None, server=None, backlog=100,
+                       ssl_handshake_timeout=constants.SSL_HANDSHAKE_TIMEOUT,
+                       ssl_shutdown_timeout=constants.SSL_SHUTDOWN_TIMEOUT):
+        self._add_reader(sock.fileno(), self._accept_connection,
+                         protocol_factory, sock, sslcontext, server, backlog,
+                         ssl_handshake_timeout, ssl_shutdown_timeout)
+
+    def _accept_connection(
+            self, protocol_factory, sock,
+            sslcontext=None, server=None, backlog=100,
+            ssl_handshake_timeout=constants.SSL_HANDSHAKE_TIMEOUT,
+            ssl_shutdown_timeout=constants.SSL_SHUTDOWN_TIMEOUT):
+        # This method is only called once for each event loop tick where the
+        # listening socket has triggered an EVENT_READ. There may be multiple
+        # connections waiting for an .accept() so it is called in a loop.
+        # See https://bugs.python.org/issue27906 for more details.
+        for _ in range(backlog + 1):
+            try:
+                conn, addr = sock.accept()
+                if self._debug:
+                    logger.debug("%r got a new connection from %r: %r",
+                                 server, addr, conn)
+                conn.setblocking(False)
+            except ConnectionAbortedError:
+                # Discard connections that were aborted before accept().
+                continue
+            except (BlockingIOError, InterruptedError):
+                # Early exit because of a signal or
+                # the socket accept buffer is empty.
+                return
+            except OSError as exc:
+                # There's nowhere to send the error, so just log it.
+                if exc.errno in (errno.EMFILE, errno.ENFILE,
+                                 errno.ENOBUFS, errno.ENOMEM):
+                    # Some platforms (e.g. Linux keep reporting the FD as
+                    # ready, so we remove the read handler temporarily.
+                    # We'll try again in a while.
+                    self.call_exception_handler({
+                        'message': 'socket.accept() out of system resource',
+                        'exception': exc,
+                        'socket': trsock.TransportSocket(sock),
+                    })
+                    self._remove_reader(sock.fileno())
+                    self.call_later(constants.ACCEPT_RETRY_DELAY,
+                                    self._start_serving,
+                                    protocol_factory, sock, sslcontext, server,
+                                    backlog, ssl_handshake_timeout,
+                                    ssl_shutdown_timeout)
+                else:
+                    raise  # The event loop will catch, log and ignore it.
+            else:
+                extra = {'peername': addr}
+                accept = self._accept_connection2(
+                    protocol_factory, conn, extra, sslcontext, server,
+                    ssl_handshake_timeout, ssl_shutdown_timeout)
+                self.create_task(accept)
+
+    async def _accept_connection2(
+            self, protocol_factory, conn, extra,
+            sslcontext=None, server=None,
+            ssl_handshake_timeout=constants.SSL_HANDSHAKE_TIMEOUT,
+            ssl_shutdown_timeout=constants.SSL_SHUTDOWN_TIMEOUT):
+        protocol = None
+        transport = None
+        try:
+            protocol = protocol_factory()
+            waiter = self.create_future()
+            if sslcontext:
+                transport = self._make_ssl_transport(
+                    conn, protocol, sslcontext, waiter=waiter,
+                    server_side=True, extra=extra, server=server,
+                    ssl_handshake_timeout=ssl_handshake_timeout,
+                    ssl_shutdown_timeout=ssl_shutdown_timeout)
+            else:
+                transport = self._make_socket_transport(
+                    conn, protocol, waiter=waiter, extra=extra,
+                    server=server)
+
+            try:
+                await waiter
+            except BaseException:
+                transport.close()
+                # gh-109534: When an exception is raised by the SSLProtocol object the
+                # exception set in this future can keep the protocol object alive and
+                # cause a reference cycle.
+                waiter = None
+                raise
+                # It's now up to the protocol to handle the connection.
+
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            if self._debug:
+                context = {
+                    'message':
+                        'Error on transport creation for incoming connection',
+                    'exception': exc,
+                }
+                if protocol is not None:
+                    context['protocol'] = protocol
+                if transport is not None:
+                    context['transport'] = transport
+                self.call_exception_handler(context)
+
+    def _ensure_fd_no_transport(self, fd):
+        fileno = fd
+        if not isinstance(fileno, int):
+            try:
+                fileno = int(fileno.fileno())
+            except (AttributeError, TypeError, ValueError):
+                # This code matches selectors._fileobj_to_fd function.
+                raise ValueError(f"Invalid file object: {fd!r}") from None
+        transport = self._transports.get(fileno)
+        if transport and not transport.is_closing():
+            raise RuntimeError(
+                f'File descriptor {fd!r} is used by transport '
+                f'{transport!r}')
+
+    def _add_reader(self, fd, callback, *args):
+        self._check_closed()
+        handle = events.Handle(callback, args, self, None)
+        key = self._selector.get_map().get(fd)
+        if key is None:
+            self._selector.register(fd, selectors.EVENT_READ,
+                                    (handle, None))
+        else:
+            mask, (reader, writer) = key.events, key.data
+            self._selector.modify(fd, mask | selectors.EVENT_READ,
+                                  (handle, writer))
+            if reader is not None:
+                reader.cancel()
+        return handle
+
+    def _remove_reader(self, fd):
+        if self.is_closed():
+            return False
+        key = self._selector.get_map().get(fd)
+        if key is None:
+            return False
+        mask, (reader, writer) = key.events, key.data
+        mask &= ~selectors.EVENT_READ
+        if not mask:
+            self._selector.unregister(fd)
+        else:
+            self._selector.modify(fd, mask, (None, writer))
+
+        if reader is not None:
+            reader.cancel()
+            return True
+        else:
+            return False
+
+    def _add_writer(self, fd, callback, *args):
+        self._check_closed()
+        handle = events.Handle(callback, args, self, None)
+        key = self._selector.get_map().get(fd)
+        if key is None:
+            self._selector.register(fd, selectors.EVENT_WRITE,
+                                    (None, handle))
+        else:
+            mask, (reader, writer) = key.events, key.data
+            self._selector.modify(fd, mask | selectors.EVENT_WRITE,
+                                  (reader, handle))
+            if writer is not None:
+                writer.cancel()
+        return handle
+
+    def _remove_writer(self, fd):
+        """Remove a writer callback."""
+        if self.is_closed():
+            return False
+        key = self._selector.get_map().get(fd)
+        if key is None:
+            return False
+        mask, (reader, writer) = key.events, key.data
+        # Remove both writer and connector.
+        mask &= ~selectors.EVENT_WRITE
+        if not mask:
+            self._selector.unregister(fd)
+        else:
+            self._selector.modify(fd, mask, (reader, None))
+
+        if writer is not None:
+            writer.cancel()
+            return True
+        else:
+            return False
+
+    def add_reader(self, fd, callback, *args):
+        """Add a reader callback."""
+        self._ensure_fd_no_transport(fd)
+        self._add_reader(fd, callback, *args)
+
+    def remove_reader(self, fd):
+        """Remove a reader callback."""
+        self._ensure_fd_no_transport(fd)
+        return self._remove_reader(fd)
+
+    def add_writer(self, fd, callback, *args):
+        """Add a writer callback.."""
+        self._ensure_fd_no_transport(fd)
+        self._add_writer(fd, callback, *args)
+
+    def remove_writer(self, fd):
+        """Remove a writer callback."""
+        self._ensure_fd_no_transport(fd)
+        return self._remove_writer(fd)
+
+    async def sock_recv(self, sock, n):
+        """Receive data from the socket.
+
+        The return value is a bytes object representing the data received.
+        The maximum amount of data to be received at once is specified by
+        nbytes.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        try:
+            return sock.recv(n)
+        except (BlockingIOError, InterruptedError):
+            pass
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        handle = self._add_reader(fd, self._sock_recv, fut, sock, n)
+        fut.add_done_callback(
+            functools.partial(self._sock_read_done, fd, handle=handle))
+        return await fut
+
+    def _sock_read_done(self, fd, fut, handle=None):
+        if handle is None or not handle.cancelled():
+            self.remove_reader(fd)
+
+    def _sock_recv(self, fut, sock, n):
+        # _sock_recv() can add itself as an I/O callback if the operation can't
+        # be done immediately. Don't use it directly, call sock_recv().
+        if fut.done():
+            return
+        try:
+            data = sock.recv(n)
+        except (BlockingIOError, InterruptedError):
+            return  # try again next time
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(data)
+
+    async def sock_recv_into(self, sock, buf):
+        """Receive data from the socket.
+
+        The received data is written into *buf* (a writable buffer).
+        The return value is the number of bytes written.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        try:
+            return sock.recv_into(buf)
+        except (BlockingIOError, InterruptedError):
+            pass
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        handle = self._add_reader(fd, self._sock_recv_into, fut, sock, buf)
+        fut.add_done_callback(
+            functools.partial(self._sock_read_done, fd, handle=handle))
+        return await fut
+
+    def _sock_recv_into(self, fut, sock, buf):
+        # _sock_recv_into() can add itself as an I/O callback if the operation
+        # can't be done immediately. Don't use it directly, call
+        # sock_recv_into().
+        if fut.done():
+            return
+        try:
+            nbytes = sock.recv_into(buf)
+        except (BlockingIOError, InterruptedError):
+            return  # try again next time
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(nbytes)
+
+    async def sock_recvfrom(self, sock, bufsize):
+        """Receive a datagram from a datagram socket.
+
+        The return value is a tuple of (bytes, address) representing the
+        datagram received and the address it came from.
+        The maximum amount of data to be received at once is specified by
+        nbytes.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        try:
+            return sock.recvfrom(bufsize)
+        except (BlockingIOError, InterruptedError):
+            pass
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        handle = self._add_reader(fd, self._sock_recvfrom, fut, sock, bufsize)
+        fut.add_done_callback(
+            functools.partial(self._sock_read_done, fd, handle=handle))
+        return await fut
+
+    def _sock_recvfrom(self, fut, sock, bufsize):
+        # _sock_recvfrom() can add itself as an I/O callback if the operation
+        # can't be done immediately. Don't use it directly, call
+        # sock_recvfrom().
+        if fut.done():
+            return
+        try:
+            result = sock.recvfrom(bufsize)
+        except (BlockingIOError, InterruptedError):
+            return  # try again next time
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(result)
+
+    async def sock_recvfrom_into(self, sock, buf, nbytes=0):
+        """Receive data from the socket.
+
+        The received data is written into *buf* (a writable buffer).
+        The return value is a tuple of (number of bytes written, address).
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        if not nbytes:
+            nbytes = len(buf)
+
+        try:
+            return sock.recvfrom_into(buf, nbytes)
+        except (BlockingIOError, InterruptedError):
+            pass
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        handle = self._add_reader(fd, self._sock_recvfrom_into, fut, sock, buf,
+                                  nbytes)
+        fut.add_done_callback(
+            functools.partial(self._sock_read_done, fd, handle=handle))
+        return await fut
+
+    def _sock_recvfrom_into(self, fut, sock, buf, bufsize):
+        # _sock_recv_into() can add itself as an I/O callback if the operation
+        # can't be done immediately. Don't use it directly, call
+        # sock_recv_into().
+        if fut.done():
+            return
+        try:
+            result = sock.recvfrom_into(buf, bufsize)
+        except (BlockingIOError, InterruptedError):
+            return  # try again next time
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(result)
+
+    async def sock_sendall(self, sock, data):
+        """Send data to the socket.
+
+        The socket must be connected to a remote socket. This method continues
+        to send data from data until either all data has been sent or an
+        error occurs. None is returned on success. On error, an exception is
+        raised, and there is no way to determine how much data, if any, was
+        successfully processed by the receiving end of the connection.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        try:
+            n = sock.send(data)
+        except (BlockingIOError, InterruptedError):
+            n = 0
+
+        if n == len(data):
+            # all data sent
+            return
+
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        # use a trick with a list in closure to store a mutable state
+        handle = self._add_writer(fd, self._sock_sendall, fut, sock,
+                                  memoryview(data), [n])
+        fut.add_done_callback(
+            functools.partial(self._sock_write_done, fd, handle=handle))
+        return await fut
+
+    def _sock_sendall(self, fut, sock, view, pos):
+        if fut.done():
+            # Future cancellation can be scheduled on previous loop iteration
+            return
+        start = pos[0]
+        try:
+            n = sock.send(view[start:])
+        except (BlockingIOError, InterruptedError):
+            return
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+            return
+
+        start += n
+
+        if start == len(view):
+            fut.set_result(None)
+        else:
+            pos[0] = start
+
+    async def sock_sendto(self, sock, data, address):
+        """Send data to the socket.
+
+        The socket must be connected to a remote socket. This method continues
+        to send data from data until either all data has been sent or an
+        error occurs. None is returned on success. On error, an exception is
+        raised, and there is no way to determine how much data, if any, was
+        successfully processed by the receiving end of the connection.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        try:
+            return sock.sendto(data, address)
+        except (BlockingIOError, InterruptedError):
+            pass
+
+        fut = self.create_future()
+        fd = sock.fileno()
+        self._ensure_fd_no_transport(fd)
+        # use a trick with a list in closure to store a mutable state
+        handle = self._add_writer(fd, self._sock_sendto, fut, sock, data,
+                                  address)
+        fut.add_done_callback(
+            functools.partial(self._sock_write_done, fd, handle=handle))
+        return await fut
+
+    def _sock_sendto(self, fut, sock, data, address):
+        if fut.done():
+            # Future cancellation can be scheduled on previous loop iteration
+            return
+        try:
+            n = sock.sendto(data, 0, address)
+        except (BlockingIOError, InterruptedError):
+            return
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(n)
+
+    async def sock_connect(self, sock, address):
+        """Connect to a remote socket at address.
+
+        This method is a coroutine.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+
+        if sock.family == socket.AF_INET or (
+                base_events._HAS_IPv6 and sock.family == socket.AF_INET6):
+            resolved = await self._ensure_resolved(
+                address, family=sock.family, type=sock.type, proto=sock.proto,
+                loop=self,
+            )
+            _, _, _, _, address = resolved[0]
+
+        fut = self.create_future()
+        self._sock_connect(fut, sock, address)
+        try:
+            return await fut
+        finally:
+            # Needed to break cycles when an exception occurs.
+            fut = None
+
+    def _sock_connect(self, fut, sock, address):
+        fd = sock.fileno()
+        try:
+            sock.connect(address)
+        except (BlockingIOError, InterruptedError):
+            # Issue #23618: When the C function connect() fails with EINTR, the
+            # connection runs in background. We have to wait until the socket
+            # becomes writable to be notified when the connection succeed or
+            # fails.
+            self._ensure_fd_no_transport(fd)
+            handle = self._add_writer(
+                fd, self._sock_connect_cb, fut, sock, address)
+            fut.add_done_callback(
+                functools.partial(self._sock_write_done, fd, handle=handle))
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(None)
+        finally:
+            fut = None
+
+    def _sock_write_done(self, fd, fut, handle=None):
+        if handle is None or not handle.cancelled():
+            self.remove_writer(fd)
+
+    def _sock_connect_cb(self, fut, sock, address):
+        if fut.done():
+            return
+
+        try:
+            err = sock.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
+            if err != 0:
+                # Jump to any except clause below.
+                raise OSError(err, f'Connect call failed {address}')
+        except (BlockingIOError, InterruptedError):
+            # socket is still registered, the callback will be retried later
+            pass
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result(None)
+        finally:
+            fut = None
+
+    async def sock_accept(self, sock):
+        """Accept a connection.
+
+        The socket must be bound to an address and listening for connections.
+        The return value is a pair (conn, address) where conn is a new socket
+        object usable to send and receive data on the connection, and address
+        is the address bound to the socket on the other end of the connection.
+        """
+        base_events._check_ssl_socket(sock)
+        if self._debug and sock.gettimeout() != 0:
+            raise ValueError("the socket must be non-blocking")
+        fut = self.create_future()
+        self._sock_accept(fut, sock)
+        return await fut
+
+    def _sock_accept(self, fut, sock):
+        fd = sock.fileno()
+        try:
+            conn, address = sock.accept()
+            conn.setblocking(False)
+        except (BlockingIOError, InterruptedError):
+            self._ensure_fd_no_transport(fd)
+            handle = self._add_reader(fd, self._sock_accept, fut, sock)
+            fut.add_done_callback(
+                functools.partial(self._sock_read_done, fd, handle=handle))
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            fut.set_exception(exc)
+        else:
+            fut.set_result((conn, address))
+
+    async def _sendfile_native(self, transp, file, offset, count):
+        del self._transports[transp._sock_fd]
+        resume_reading = transp.is_reading()
+        transp.pause_reading()
+        await transp._make_empty_waiter()
+        try:
+            return await self.sock_sendfile(transp._sock, file, offset, count,
+                                            fallback=False)
+        finally:
+            transp._reset_empty_waiter()
+            if resume_reading:
+                transp.resume_reading()
+            self._transports[transp._sock_fd] = transp
+
+    def _process_events(self, event_list):
+        for key, mask in event_list:
+            fileobj, (reader, writer) = key.fileobj, key.data
+            if mask & selectors.EVENT_READ and reader is not None:
+                if reader._cancelled:
+                    self._remove_reader(fileobj)
+                else:
+                    self._add_callback(reader)
+            if mask & selectors.EVENT_WRITE and writer is not None:
+                if writer._cancelled:
+                    self._remove_writer(fileobj)
+                else:
+                    self._add_callback(writer)
+
+    def _stop_serving(self, sock):
+        self._remove_reader(sock.fileno())
+        sock.close()
+
+
+class _SelectorTransport(transports._FlowControlMixin,
+                         transports.Transport):
+
+    max_size = 256 * 1024  # Buffer size passed to recv().
+
+    # Attribute used in the destructor: it must be set even if the constructor
+    # is not called (see _SelectorSslTransport which may start by raising an
+    # exception)
+    _sock = None
+
+    def __init__(self, loop, sock, protocol, extra=None, server=None):
+        super().__init__(extra, loop)
+        self._extra['socket'] = trsock.TransportSocket(sock)
+        try:
+            self._extra['sockname'] = sock.getsockname()
+        except OSError:
+            self._extra['sockname'] = None
+        if 'peername' not in self._extra:
+            try:
+                self._extra['peername'] = sock.getpeername()
+            except socket.error:
+                self._extra['peername'] = None
+        self._sock = sock
+        self._sock_fd = sock.fileno()
+
+        self._protocol_connected = False
+        self.set_protocol(protocol)
+
+        self._server = server
+        self._buffer = collections.deque()
+        self._conn_lost = 0  # Set when call to connection_lost scheduled.
+        self._closing = False  # Set when close() called.
+        self._paused = False  # Set when pause_reading() called
+
+        if self._server is not None:
+            self._server._attach(self)
+        loop._transports[self._sock_fd] = self
+
+    def __repr__(self):
+        info = [self.__class__.__name__]
+        if self._sock is None:
+            info.append('closed')
+        elif self._closing:
+            info.append('closing')
+        info.append(f'fd={self._sock_fd}')
+        # test if the transport was closed
+        if self._loop is not None and not self._loop.is_closed():
+            polling = _test_selector_event(self._loop._selector,
+                                           self._sock_fd, selectors.EVENT_READ)
+            if polling:
+                info.append('read=polling')
+            else:
+                info.append('read=idle')
+
+            polling = _test_selector_event(self._loop._selector,
+                                           self._sock_fd,
+                                           selectors.EVENT_WRITE)
+            if polling:
+                state = 'polling'
+            else:
+                state = 'idle'
+
+            bufsize = self.get_write_buffer_size()
+            info.append(f'write=<{state}, bufsize={bufsize}>')
+        return '<{}>'.format(' '.join(info))
+
+    def abort(self):
+        self._force_close(None)
+
+    def set_protocol(self, protocol):
+        self._protocol = protocol
+        self._protocol_connected = True
+
+    def get_protocol(self):
+        return self._protocol
+
+    def is_closing(self):
+        return self._closing
+
+    def is_reading(self):
+        return not self.is_closing() and not self._paused
+
+    def pause_reading(self):
+        if not self.is_reading():
+            return
+        self._paused = True
+        self._loop._remove_reader(self._sock_fd)
+        if self._loop.get_debug():
+            logger.debug("%r pauses reading", self)
+
+    def resume_reading(self):
+        if self._closing or not self._paused:
+            return
+        self._paused = False
+        self._add_reader(self._sock_fd, self._read_ready)
+        if self._loop.get_debug():
+            logger.debug("%r resumes reading", self)
+
+    def close(self):
+        if self._closing:
+            return
+        self._closing = True
+        self._loop._remove_reader(self._sock_fd)
+        if not self._buffer:
+            self._conn_lost += 1
+            self._loop._remove_writer(self._sock_fd)
+            self._loop.call_soon(self._call_connection_lost, None)
+
+    def __del__(self, _warn=warnings.warn):
+        if self._sock is not None:
+            _warn(f"unclosed transport {self!r}", ResourceWarning, source=self)
+            self._sock.close()
+            if self._server is not None:
+                self._server._detach(self)
+
+    def _fatal_error(self, exc, message='Fatal error on transport'):
+        # Should be called from exception handler only.
+        if isinstance(exc, OSError):
+            if self._loop.get_debug():
+                logger.debug("%r: %s", self, message, exc_info=True)
+        else:
+            self._loop.call_exception_handler({
+                'message': message,
+                'exception': exc,
+                'transport': self,
+                'protocol': self._protocol,
+            })
+        self._force_close(exc)
+
+    def _force_close(self, exc):
+        if self._conn_lost:
+            return
+        if self._buffer:
+            self._buffer.clear()
+            self._loop._remove_writer(self._sock_fd)
+        if not self._closing:
+            self._closing = True
+            self._loop._remove_reader(self._sock_fd)
+        self._conn_lost += 1
+        self._loop.call_soon(self._call_connection_lost, exc)
+
+    def _call_connection_lost(self, exc):
+        try:
+            if self._protocol_connected:
+                self._protocol.connection_lost(exc)
+        finally:
+            self._sock.close()
+            self._sock = None
+            self._protocol = None
+            self._loop = None
+            server = self._server
+            if server is not None:
+                server._detach(self)
+                self._server = None
+
+    def get_write_buffer_size(self):
+        return sum(map(len, self._buffer))
+
+    def _add_reader(self, fd, callback, *args):
+        if not self.is_reading():
+            return
+        self._loop._add_reader(fd, callback, *args)
+
+
+class _SelectorSocketTransport(_SelectorTransport):
+
+    _start_tls_compatible = True
+    _sendfile_compatible = constants._SendfileMode.TRY_NATIVE
+
+    def __init__(self, loop, sock, protocol, waiter=None,
+                 extra=None, server=None):
+
+        self._read_ready_cb = None
+        super().__init__(loop, sock, protocol, extra, server)
+        self._eof = False
+        self._empty_waiter = None
+        if _HAS_SENDMSG:
+            self._write_ready = self._write_sendmsg
+        else:
+            self._write_ready = self._write_send
+        # Disable the Nagle algorithm -- small writes will be
+        # sent without waiting for the TCP ACK.  This generally
+        # decreases the latency (in some cases significantly.)
+        base_events._set_nodelay(self._sock)
+
+        self._loop.call_soon(self._protocol.connection_made, self)
+        # only start reading when connection_made() has been called
+        self._loop.call_soon(self._add_reader,
+                             self._sock_fd, self._read_ready)
+        if waiter is not None:
+            # only wake up the waiter when connection_made() has been called
+            self._loop.call_soon(futures._set_result_unless_cancelled,
+                                 waiter, None)
+
+    def set_protocol(self, protocol):
+        if isinstance(protocol, protocols.BufferedProtocol):
+            self._read_ready_cb = self._read_ready__get_buffer
+        else:
+            self._read_ready_cb = self._read_ready__data_received
+
+        super().set_protocol(protocol)
+
+    def _read_ready(self):
+        self._read_ready_cb()
+
+    def _read_ready__get_buffer(self):
+        if self._conn_lost:
+            return
+
+        try:
+            buf = self._protocol.get_buffer(-1)
+            if not len(buf):
+                raise RuntimeError('get_buffer() returned an empty buffer')
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(
+                exc, 'Fatal error: protocol.get_buffer() call failed.')
+            return
+
+        try:
+            nbytes = self._sock.recv_into(buf)
+        except (BlockingIOError, InterruptedError):
+            return
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(exc, 'Fatal read error on socket transport')
+            return
+
+        if not nbytes:
+            self._read_ready__on_eof()
+            return
+
+        try:
+            self._protocol.buffer_updated(nbytes)
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(
+                exc, 'Fatal error: protocol.buffer_updated() call failed.')
+
+    def _read_ready__data_received(self):
+        if self._conn_lost:
+            return
+        try:
+            data = self._sock.recv(self.max_size)
+        except (BlockingIOError, InterruptedError):
+            return
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(exc, 'Fatal read error on socket transport')
+            return
+
+        if not data:
+            self._read_ready__on_eof()
+            return
+
+        try:
+            self._protocol.data_received(data)
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(
+                exc, 'Fatal error: protocol.data_received() call failed.')
+
+    def _read_ready__on_eof(self):
+        if self._loop.get_debug():
+            logger.debug("%r received EOF", self)
+
+        try:
+            keep_open = self._protocol.eof_received()
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(
+                exc, 'Fatal error: protocol.eof_received() call failed.')
+            return
+
+        if keep_open:
+            # We're keeping the connection open so the
+            # protocol can write more, but we still can't
+            # receive more, so remove the reader callback.
+            self._loop._remove_reader(self._sock_fd)
+        else:
+            self.close()
+
+    def write(self, data):
+        if not isinstance(data, (bytes, bytearray, memoryview)):
+            raise TypeError(f'data argument must be a bytes, bytearray, or memoryview '
+                            f'object, not {type(data).__name__!r}')
+        if self._eof:
+            raise RuntimeError('Cannot call write() after write_eof()')
+        if self._empty_waiter is not None:
+            raise RuntimeError('unable to write; sendfile is in progress')
+        if not data:
+            return
+
+        if self._conn_lost:
+            if self._conn_lost >= constants.LOG_THRESHOLD_FOR_CONNLOST_WRITES:
+                logger.warning('socket.send() raised exception.')
+            self._conn_lost += 1
+            return
+
+        if not self._buffer:
+            # Optimization: try to send now.
+            try:
+                n = self._sock.send(data)
+            except (BlockingIOError, InterruptedError):
+                pass
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._fatal_error(exc, 'Fatal write error on socket transport')
+                return
+            else:
+                data = memoryview(data)[n:]
+                if not data:
+                    return
+            # Not all was written; register write handler.
+            self._loop._add_writer(self._sock_fd, self._write_ready)
+
+        # Add it to the buffer.
+        self._buffer.append(data)
+        self._maybe_pause_protocol()
+
+    def _get_sendmsg_buffer(self):
+        return itertools.islice(self._buffer, SC_IOV_MAX)
+
+    def _write_sendmsg(self):
+        assert self._buffer, 'Data should not be empty'
+        if self._conn_lost:
+            return
+        try:
+            nbytes = self._sock.sendmsg(self._get_sendmsg_buffer())
+            self._adjust_leftover_buffer(nbytes)
+        except (BlockingIOError, InterruptedError):
+            pass
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._loop._remove_writer(self._sock_fd)
+            self._buffer.clear()
+            self._fatal_error(exc, 'Fatal write error on socket transport')
+            if self._empty_waiter is not None:
+                self._empty_waiter.set_exception(exc)
+        else:
+            self._maybe_resume_protocol()  # May append to buffer.
+            if not self._buffer:
+                self._loop._remove_writer(self._sock_fd)
+                if self._empty_waiter is not None:
+                    self._empty_waiter.set_result(None)
+                if self._closing:
+                    self._call_connection_lost(None)
+                elif self._eof:
+                    self._sock.shutdown(socket.SHUT_WR)
+
+    def _adjust_leftover_buffer(self, nbytes: int) -> None:
+        buffer = self._buffer
+        while nbytes:
+            b = buffer.popleft()
+            b_len = len(b)
+            if b_len <= nbytes:
+                nbytes -= b_len
+            else:
+                buffer.appendleft(b[nbytes:])
+                break
+
+    def _write_send(self):
+        assert self._buffer, 'Data should not be empty'
+        if self._conn_lost:
+            return
+        try:
+            buffer = self._buffer.popleft()
+            n = self._sock.send(buffer)
+            if n != len(buffer):
+                # Not all data was written
+                self._buffer.appendleft(buffer[n:])
+        except (BlockingIOError, InterruptedError):
+            pass
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._loop._remove_writer(self._sock_fd)
+            self._buffer.clear()
+            self._fatal_error(exc, 'Fatal write error on socket transport')
+            if self._empty_waiter is not None:
+                self._empty_waiter.set_exception(exc)
+        else:
+            self._maybe_resume_protocol()  # May append to buffer.
+            if not self._buffer:
+                self._loop._remove_writer(self._sock_fd)
+                if self._empty_waiter is not None:
+                    self._empty_waiter.set_result(None)
+                if self._closing:
+                    self._call_connection_lost(None)
+                elif self._eof:
+                    self._sock.shutdown(socket.SHUT_WR)
+
+    def write_eof(self):
+        if self._closing or self._eof:
+            return
+        self._eof = True
+        if not self._buffer:
+            self._sock.shutdown(socket.SHUT_WR)
+
+    def writelines(self, list_of_data):
+        if self._eof:
+            raise RuntimeError('Cannot call writelines() after write_eof()')
+        if self._empty_waiter is not None:
+            raise RuntimeError('unable to writelines; sendfile is in progress')
+        if not list_of_data:
+            return
+
+        if self._conn_lost:
+            if self._conn_lost >= constants.LOG_THRESHOLD_FOR_CONNLOST_WRITES:
+                logger.warning('socket.send() raised exception.')
+            self._conn_lost += 1
+            return
+
+        self._buffer.extend([memoryview(data) for data in list_of_data])
+        self._write_ready()
+        # If the entire buffer couldn't be written, register a write handler
+        if self._buffer:
+            self._loop._add_writer(self._sock_fd, self._write_ready)
+            self._maybe_pause_protocol()
+
+    def can_write_eof(self):
+        return True
+
+    def _call_connection_lost(self, exc):
+        try:
+            super()._call_connection_lost(exc)
+        finally:
+            self._write_ready = None
+            if self._empty_waiter is not None:
+                self._empty_waiter.set_exception(
+                    ConnectionError("Connection is closed by peer"))
+
+    def _make_empty_waiter(self):
+        if self._empty_waiter is not None:
+            raise RuntimeError("Empty waiter is already set")
+        self._empty_waiter = self._loop.create_future()
+        if not self._buffer:
+            self._empty_waiter.set_result(None)
+        return self._empty_waiter
+
+    def _reset_empty_waiter(self):
+        self._empty_waiter = None
+
+    def close(self):
+        self._read_ready_cb = None
+        super().close()
+
+
+class _SelectorDatagramTransport(_SelectorTransport, transports.DatagramTransport):
+
+    _buffer_factory = collections.deque
+    _header_size = 8
+
+    def __init__(self, loop, sock, protocol, address=None,
+                 waiter=None, extra=None):
+        super().__init__(loop, sock, protocol, extra)
+        self._address = address
+        self._buffer_size = 0
+        self._loop.call_soon(self._protocol.connection_made, self)
+        # only start reading when connection_made() has been called
+        self._loop.call_soon(self._add_reader,
+                             self._sock_fd, self._read_ready)
+        if waiter is not None:
+            # only wake up the waiter when connection_made() has been called
+            self._loop.call_soon(futures._set_result_unless_cancelled,
+                                 waiter, None)
+
+    def get_write_buffer_size(self):
+        return self._buffer_size
+
+    def _read_ready(self):
+        if self._conn_lost:
+            return
+        try:
+            data, addr = self._sock.recvfrom(self.max_size)
+        except (BlockingIOError, InterruptedError):
+            pass
+        except OSError as exc:
+            self._protocol.error_received(exc)
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._fatal_error(exc, 'Fatal read error on datagram transport')
+        else:
+            self._protocol.datagram_received(data, addr)
+
+    def sendto(self, data, addr=None):
+        if not isinstance(data, (bytes, bytearray, memoryview)):
+            raise TypeError(f'data argument must be a bytes-like object, '
+                            f'not {type(data).__name__!r}')
+
+        if self._address:
+            if addr not in (None, self._address):
+                raise ValueError(
+                    f'Invalid address: must be None or {self._address}')
+            addr = self._address
+
+        if self._conn_lost and self._address:
+            if self._conn_lost >= constants.LOG_THRESHOLD_FOR_CONNLOST_WRITES:
+                logger.warning('socket.send() raised exception.')
+            self._conn_lost += 1
+            return
+
+        if not self._buffer:
+            # Attempt to send it right away first.
+            try:
+                if self._extra['peername']:
+                    self._sock.send(data)
+                else:
+                    self._sock.sendto(data, addr)
+                return
+            except (BlockingIOError, InterruptedError):
+                self._loop._add_writer(self._sock_fd, self._sendto_ready)
+            except OSError as exc:
+                self._protocol.error_received(exc)
+                return
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._fatal_error(
+                    exc, 'Fatal write error on datagram transport')
+                return
+
+        # Ensure that what we buffer is immutable.
+        self._buffer.append((bytes(data), addr))
+        self._buffer_size += len(data) + self._header_size
+        self._maybe_pause_protocol()
+
+    def _sendto_ready(self):
+        while self._buffer:
+            data, addr = self._buffer.popleft()
+            self._buffer_size -= len(data) + self._header_size
+            try:
+                if self._extra['peername']:
+                    self._sock.send(data)
+                else:
+                    self._sock.sendto(data, addr)
+            except (BlockingIOError, InterruptedError):
+                self._buffer.appendleft((data, addr))  # Try again later.
+                self._buffer_size += len(data) + self._header_size
+                break
+            except OSError as exc:
+                self._protocol.error_received(exc)
+                return
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._fatal_error(
+                    exc, 'Fatal write error on datagram transport')
+                return
+
+        self._maybe_resume_protocol()  # May append to buffer.
+        if not self._buffer:
+            self._loop._remove_writer(self._sock_fd)
+            if self._closing:
+                self._call_connection_lost(None)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/sslproto.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/sslproto.py
new file mode 100644
index 0000000000000000000000000000000000000000..74c5f0d5ca0609cc68830cec8ad2aa73a2fefe51
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/sslproto.py
@@ -0,0 +1,929 @@
+# Contains code from https://github.com/MagicStack/uvloop/tree/v0.16.0
+# SPDX-License-Identifier: PSF-2.0 AND (MIT OR Apache-2.0)
+# SPDX-FileCopyrightText: Copyright (c) 2015-2021 MagicStack Inc.  http://magic.io
+
+import collections
+import enum
+import warnings
+try:
+    import ssl
+except ImportError:  # pragma: no cover
+    ssl = None
+
+from . import constants
+from . import exceptions
+from . import protocols
+from . import transports
+from .log import logger
+
+if ssl is not None:
+    SSLAgainErrors = (ssl.SSLWantReadError, ssl.SSLSyscallError)
+
+
+class SSLProtocolState(enum.Enum):
+    UNWRAPPED = "UNWRAPPED"
+    DO_HANDSHAKE = "DO_HANDSHAKE"
+    WRAPPED = "WRAPPED"
+    FLUSHING = "FLUSHING"
+    SHUTDOWN = "SHUTDOWN"
+
+
+class AppProtocolState(enum.Enum):
+    # This tracks the state of app protocol (https://git.io/fj59P):
+    #
+    #     INIT -cm-> CON_MADE [-dr*->] [-er-> EOF?] -cl-> CON_LOST
+    #
+    # * cm: connection_made()
+    # * dr: data_received()
+    # * er: eof_received()
+    # * cl: connection_lost()
+
+    STATE_INIT = "STATE_INIT"
+    STATE_CON_MADE = "STATE_CON_MADE"
+    STATE_EOF = "STATE_EOF"
+    STATE_CON_LOST = "STATE_CON_LOST"
+
+
+def _create_transport_context(server_side, server_hostname):
+    if server_side:
+        raise ValueError('Server side SSL needs a valid SSLContext')
+
+    # Client side may pass ssl=True to use a default
+    # context; in that case the sslcontext passed is None.
+    # The default is secure for client connections.
+    # Python 3.4+: use up-to-date strong settings.
+    sslcontext = ssl.create_default_context()
+    if not server_hostname:
+        sslcontext.check_hostname = False
+    return sslcontext
+
+
+def add_flowcontrol_defaults(high, low, kb):
+    if high is None:
+        if low is None:
+            hi = kb * 1024
+        else:
+            lo = low
+            hi = 4 * lo
+    else:
+        hi = high
+    if low is None:
+        lo = hi // 4
+    else:
+        lo = low
+
+    if not hi >= lo >= 0:
+        raise ValueError('high (%r) must be >= low (%r) must be >= 0' %
+                         (hi, lo))
+
+    return hi, lo
+
+
+class _SSLProtocolTransport(transports._FlowControlMixin,
+                            transports.Transport):
+
+    _start_tls_compatible = True
+    _sendfile_compatible = constants._SendfileMode.FALLBACK
+
+    def __init__(self, loop, ssl_protocol):
+        self._loop = loop
+        self._ssl_protocol = ssl_protocol
+        self._closed = False
+
+    def get_extra_info(self, name, default=None):
+        """Get optional transport information."""
+        return self._ssl_protocol._get_extra_info(name, default)
+
+    def set_protocol(self, protocol):
+        self._ssl_protocol._set_app_protocol(protocol)
+
+    def get_protocol(self):
+        return self._ssl_protocol._app_protocol
+
+    def is_closing(self):
+        return self._closed or self._ssl_protocol._is_transport_closing()
+
+    def close(self):
+        """Close the transport.
+
+        Buffered data will be flushed asynchronously.  No more data
+        will be received.  After all buffered data is flushed, the
+        protocol's connection_lost() method will (eventually) called
+        with None as its argument.
+        """
+        if not self._closed:
+            self._closed = True
+            self._ssl_protocol._start_shutdown()
+        else:
+            self._ssl_protocol = None
+
+    def __del__(self, _warnings=warnings):
+        if not self._closed:
+            self._closed = True
+            _warnings.warn(
+                "unclosed transport <asyncio._SSLProtocolTransport "
+                "object>", ResourceWarning)
+
+    def is_reading(self):
+        return not self._ssl_protocol._app_reading_paused
+
+    def pause_reading(self):
+        """Pause the receiving end.
+
+        No data will be passed to the protocol's data_received()
+        method until resume_reading() is called.
+        """
+        self._ssl_protocol._pause_reading()
+
+    def resume_reading(self):
+        """Resume the receiving end.
+
+        Data received will once again be passed to the protocol's
+        data_received() method.
+        """
+        self._ssl_protocol._resume_reading()
+
+    def set_write_buffer_limits(self, high=None, low=None):
+        """Set the high- and low-water limits for write flow control.
+
+        These two values control when to call the protocol's
+        pause_writing() and resume_writing() methods.  If specified,
+        the low-water limit must be less than or equal to the
+        high-water limit.  Neither value can be negative.
+
+        The defaults are implementation-specific.  If only the
+        high-water limit is given, the low-water limit defaults to an
+        implementation-specific value less than or equal to the
+        high-water limit.  Setting high to zero forces low to zero as
+        well, and causes pause_writing() to be called whenever the
+        buffer becomes non-empty.  Setting low to zero causes
+        resume_writing() to be called only once the buffer is empty.
+        Use of zero for either limit is generally sub-optimal as it
+        reduces opportunities for doing I/O and computation
+        concurrently.
+        """
+        self._ssl_protocol._set_write_buffer_limits(high, low)
+        self._ssl_protocol._control_app_writing()
+
+    def get_write_buffer_limits(self):
+        return (self._ssl_protocol._outgoing_low_water,
+                self._ssl_protocol._outgoing_high_water)
+
+    def get_write_buffer_size(self):
+        """Return the current size of the write buffers."""
+        return self._ssl_protocol._get_write_buffer_size()
+
+    def set_read_buffer_limits(self, high=None, low=None):
+        """Set the high- and low-water limits for read flow control.
+
+        These two values control when to call the upstream transport's
+        pause_reading() and resume_reading() methods.  If specified,
+        the low-water limit must be less than or equal to the
+        high-water limit.  Neither value can be negative.
+
+        The defaults are implementation-specific.  If only the
+        high-water limit is given, the low-water limit defaults to an
+        implementation-specific value less than or equal to the
+        high-water limit.  Setting high to zero forces low to zero as
+        well, and causes pause_reading() to be called whenever the
+        buffer becomes non-empty.  Setting low to zero causes
+        resume_reading() to be called only once the buffer is empty.
+        Use of zero for either limit is generally sub-optimal as it
+        reduces opportunities for doing I/O and computation
+        concurrently.
+        """
+        self._ssl_protocol._set_read_buffer_limits(high, low)
+        self._ssl_protocol._control_ssl_reading()
+
+    def get_read_buffer_limits(self):
+        return (self._ssl_protocol._incoming_low_water,
+                self._ssl_protocol._incoming_high_water)
+
+    def get_read_buffer_size(self):
+        """Return the current size of the read buffer."""
+        return self._ssl_protocol._get_read_buffer_size()
+
+    @property
+    def _protocol_paused(self):
+        # Required for sendfile fallback pause_writing/resume_writing logic
+        return self._ssl_protocol._app_writing_paused
+
+    def write(self, data):
+        """Write some data bytes to the transport.
+
+        This does not block; it buffers the data and arranges for it
+        to be sent out asynchronously.
+        """
+        if not isinstance(data, (bytes, bytearray, memoryview)):
+            raise TypeError(f"data: expecting a bytes-like instance, "
+                            f"got {type(data).__name__}")
+        if not data:
+            return
+        self._ssl_protocol._write_appdata((data,))
+
+    def writelines(self, list_of_data):
+        """Write a list (or any iterable) of data bytes to the transport.
+
+        The default implementation concatenates the arguments and
+        calls write() on the result.
+        """
+        self._ssl_protocol._write_appdata(list_of_data)
+
+    def write_eof(self):
+        """Close the write end after flushing buffered data.
+
+        This raises :exc:`NotImplementedError` right now.
+        """
+        raise NotImplementedError
+
+    def can_write_eof(self):
+        """Return True if this transport supports write_eof(), False if not."""
+        return False
+
+    def abort(self):
+        """Close the transport immediately.
+
+        Buffered data will be lost.  No more data will be received.
+        The protocol's connection_lost() method will (eventually) be
+        called with None as its argument.
+        """
+        self._force_close(None)
+
+    def _force_close(self, exc):
+        self._closed = True
+        if self._ssl_protocol is not None:
+            self._ssl_protocol._abort(exc)
+
+    def _test__append_write_backlog(self, data):
+        # for test only
+        self._ssl_protocol._write_backlog.append(data)
+        self._ssl_protocol._write_buffer_size += len(data)
+
+
+class SSLProtocol(protocols.BufferedProtocol):
+    max_size = 256 * 1024   # Buffer size passed to read()
+
+    _handshake_start_time = None
+    _handshake_timeout_handle = None
+    _shutdown_timeout_handle = None
+
+    def __init__(self, loop, app_protocol, sslcontext, waiter,
+                 server_side=False, server_hostname=None,
+                 call_connection_made=True,
+                 ssl_handshake_timeout=None,
+                 ssl_shutdown_timeout=None):
+        if ssl is None:
+            raise RuntimeError("stdlib ssl module not available")
+
+        self._ssl_buffer = bytearray(self.max_size)
+        self._ssl_buffer_view = memoryview(self._ssl_buffer)
+
+        if ssl_handshake_timeout is None:
+            ssl_handshake_timeout = constants.SSL_HANDSHAKE_TIMEOUT
+        elif ssl_handshake_timeout <= 0:
+            raise ValueError(
+                f"ssl_handshake_timeout should be a positive number, "
+                f"got {ssl_handshake_timeout}")
+        if ssl_shutdown_timeout is None:
+            ssl_shutdown_timeout = constants.SSL_SHUTDOWN_TIMEOUT
+        elif ssl_shutdown_timeout <= 0:
+            raise ValueError(
+                f"ssl_shutdown_timeout should be a positive number, "
+                f"got {ssl_shutdown_timeout}")
+
+        if not sslcontext:
+            sslcontext = _create_transport_context(
+                server_side, server_hostname)
+
+        self._server_side = server_side
+        if server_hostname and not server_side:
+            self._server_hostname = server_hostname
+        else:
+            self._server_hostname = None
+        self._sslcontext = sslcontext
+        # SSL-specific extra info. More info are set when the handshake
+        # completes.
+        self._extra = dict(sslcontext=sslcontext)
+
+        # App data write buffering
+        self._write_backlog = collections.deque()
+        self._write_buffer_size = 0
+
+        self._waiter = waiter
+        self._loop = loop
+        self._set_app_protocol(app_protocol)
+        self._app_transport = None
+        self._app_transport_created = False
+        # transport, ex: SelectorSocketTransport
+        self._transport = None
+        self._ssl_handshake_timeout = ssl_handshake_timeout
+        self._ssl_shutdown_timeout = ssl_shutdown_timeout
+        # SSL and state machine
+        self._incoming = ssl.MemoryBIO()
+        self._outgoing = ssl.MemoryBIO()
+        self._state = SSLProtocolState.UNWRAPPED
+        self._conn_lost = 0  # Set when connection_lost called
+        if call_connection_made:
+            self._app_state = AppProtocolState.STATE_INIT
+        else:
+            self._app_state = AppProtocolState.STATE_CON_MADE
+        self._sslobj = self._sslcontext.wrap_bio(
+            self._incoming, self._outgoing,
+            server_side=self._server_side,
+            server_hostname=self._server_hostname)
+
+        # Flow Control
+
+        self._ssl_writing_paused = False
+
+        self._app_reading_paused = False
+
+        self._ssl_reading_paused = False
+        self._incoming_high_water = 0
+        self._incoming_low_water = 0
+        self._set_read_buffer_limits()
+        self._eof_received = False
+
+        self._app_writing_paused = False
+        self._outgoing_high_water = 0
+        self._outgoing_low_water = 0
+        self._set_write_buffer_limits()
+        self._get_app_transport()
+
+    def _set_app_protocol(self, app_protocol):
+        self._app_protocol = app_protocol
+        # Make fast hasattr check first
+        if (hasattr(app_protocol, 'get_buffer') and
+                isinstance(app_protocol, protocols.BufferedProtocol)):
+            self._app_protocol_get_buffer = app_protocol.get_buffer
+            self._app_protocol_buffer_updated = app_protocol.buffer_updated
+            self._app_protocol_is_buffer = True
+        else:
+            self._app_protocol_is_buffer = False
+
+    def _wakeup_waiter(self, exc=None):
+        if self._waiter is None:
+            return
+        if not self._waiter.cancelled():
+            if exc is not None:
+                self._waiter.set_exception(exc)
+            else:
+                self._waiter.set_result(None)
+        self._waiter = None
+
+    def _get_app_transport(self):
+        if self._app_transport is None:
+            if self._app_transport_created:
+                raise RuntimeError('Creating _SSLProtocolTransport twice')
+            self._app_transport = _SSLProtocolTransport(self._loop, self)
+            self._app_transport_created = True
+        return self._app_transport
+
+    def _is_transport_closing(self):
+        return self._transport is not None and self._transport.is_closing()
+
+    def connection_made(self, transport):
+        """Called when the low-level connection is made.
+
+        Start the SSL handshake.
+        """
+        self._transport = transport
+        self._start_handshake()
+
+    def connection_lost(self, exc):
+        """Called when the low-level connection is lost or closed.
+
+        The argument is an exception object or None (the latter
+        meaning a regular EOF is received or the connection was
+        aborted or closed).
+        """
+        self._write_backlog.clear()
+        self._outgoing.read()
+        self._conn_lost += 1
+
+        # Just mark the app transport as closed so that its __dealloc__
+        # doesn't complain.
+        if self._app_transport is not None:
+            self._app_transport._closed = True
+
+        if self._state != SSLProtocolState.DO_HANDSHAKE:
+            if (
+                self._app_state == AppProtocolState.STATE_CON_MADE or
+                self._app_state == AppProtocolState.STATE_EOF
+            ):
+                self._app_state = AppProtocolState.STATE_CON_LOST
+                self._loop.call_soon(self._app_protocol.connection_lost, exc)
+        self._set_state(SSLProtocolState.UNWRAPPED)
+        self._transport = None
+        self._app_transport = None
+        self._app_protocol = None
+        self._wakeup_waiter(exc)
+
+        if self._shutdown_timeout_handle:
+            self._shutdown_timeout_handle.cancel()
+            self._shutdown_timeout_handle = None
+        if self._handshake_timeout_handle:
+            self._handshake_timeout_handle.cancel()
+            self._handshake_timeout_handle = None
+
+    def get_buffer(self, n):
+        want = n
+        if want <= 0 or want > self.max_size:
+            want = self.max_size
+        if len(self._ssl_buffer) < want:
+            self._ssl_buffer = bytearray(want)
+            self._ssl_buffer_view = memoryview(self._ssl_buffer)
+        return self._ssl_buffer_view
+
+    def buffer_updated(self, nbytes):
+        self._incoming.write(self._ssl_buffer_view[:nbytes])
+
+        if self._state == SSLProtocolState.DO_HANDSHAKE:
+            self._do_handshake()
+
+        elif self._state == SSLProtocolState.WRAPPED:
+            self._do_read()
+
+        elif self._state == SSLProtocolState.FLUSHING:
+            self._do_flush()
+
+        elif self._state == SSLProtocolState.SHUTDOWN:
+            self._do_shutdown()
+
+    def eof_received(self):
+        """Called when the other end of the low-level stream
+        is half-closed.
+
+        If this returns a false value (including None), the transport
+        will close itself.  If it returns a true value, closing the
+        transport is up to the protocol.
+        """
+        self._eof_received = True
+        try:
+            if self._loop.get_debug():
+                logger.debug("%r received EOF", self)
+
+            if self._state == SSLProtocolState.DO_HANDSHAKE:
+                self._on_handshake_complete(ConnectionResetError)
+
+            elif self._state == SSLProtocolState.WRAPPED:
+                self._set_state(SSLProtocolState.FLUSHING)
+                if self._app_reading_paused:
+                    return True
+                else:
+                    self._do_flush()
+
+            elif self._state == SSLProtocolState.FLUSHING:
+                self._do_write()
+                self._set_state(SSLProtocolState.SHUTDOWN)
+                self._do_shutdown()
+
+            elif self._state == SSLProtocolState.SHUTDOWN:
+                self._do_shutdown()
+
+        except Exception:
+            self._transport.close()
+            raise
+
+    def _get_extra_info(self, name, default=None):
+        if name in self._extra:
+            return self._extra[name]
+        elif self._transport is not None:
+            return self._transport.get_extra_info(name, default)
+        else:
+            return default
+
+    def _set_state(self, new_state):
+        allowed = False
+
+        if new_state == SSLProtocolState.UNWRAPPED:
+            allowed = True
+
+        elif (
+            self._state == SSLProtocolState.UNWRAPPED and
+            new_state == SSLProtocolState.DO_HANDSHAKE
+        ):
+            allowed = True
+
+        elif (
+            self._state == SSLProtocolState.DO_HANDSHAKE and
+            new_state == SSLProtocolState.WRAPPED
+        ):
+            allowed = True
+
+        elif (
+            self._state == SSLProtocolState.WRAPPED and
+            new_state == SSLProtocolState.FLUSHING
+        ):
+            allowed = True
+
+        elif (
+            self._state == SSLProtocolState.FLUSHING and
+            new_state == SSLProtocolState.SHUTDOWN
+        ):
+            allowed = True
+
+        if allowed:
+            self._state = new_state
+
+        else:
+            raise RuntimeError(
+                'cannot switch state from {} to {}'.format(
+                    self._state, new_state))
+
+    # Handshake flow
+
+    def _start_handshake(self):
+        if self._loop.get_debug():
+            logger.debug("%r starts SSL handshake", self)
+            self._handshake_start_time = self._loop.time()
+        else:
+            self._handshake_start_time = None
+
+        self._set_state(SSLProtocolState.DO_HANDSHAKE)
+
+        # start handshake timeout count down
+        self._handshake_timeout_handle = \
+            self._loop.call_later(self._ssl_handshake_timeout,
+                                  self._check_handshake_timeout)
+
+        self._do_handshake()
+
+    def _check_handshake_timeout(self):
+        if self._state == SSLProtocolState.DO_HANDSHAKE:
+            msg = (
+                f"SSL handshake is taking longer than "
+                f"{self._ssl_handshake_timeout} seconds: "
+                f"aborting the connection"
+            )
+            self._fatal_error(ConnectionAbortedError(msg))
+
+    def _do_handshake(self):
+        try:
+            self._sslobj.do_handshake()
+        except SSLAgainErrors:
+            self._process_outgoing()
+        except ssl.SSLError as exc:
+            self._on_handshake_complete(exc)
+        else:
+            self._on_handshake_complete(None)
+
+    def _on_handshake_complete(self, handshake_exc):
+        if self._handshake_timeout_handle is not None:
+            self._handshake_timeout_handle.cancel()
+            self._handshake_timeout_handle = None
+
+        sslobj = self._sslobj
+        try:
+            if handshake_exc is None:
+                self._set_state(SSLProtocolState.WRAPPED)
+            else:
+                raise handshake_exc
+
+            peercert = sslobj.getpeercert()
+        except Exception as exc:
+            handshake_exc = None
+            self._set_state(SSLProtocolState.UNWRAPPED)
+            if isinstance(exc, ssl.CertificateError):
+                msg = 'SSL handshake failed on verifying the certificate'
+            else:
+                msg = 'SSL handshake failed'
+            self._fatal_error(exc, msg)
+            self._wakeup_waiter(exc)
+            return
+
+        if self._loop.get_debug():
+            dt = self._loop.time() - self._handshake_start_time
+            logger.debug("%r: SSL handshake took %.1f ms", self, dt * 1e3)
+
+        # Add extra info that becomes available after handshake.
+        self._extra.update(peercert=peercert,
+                           cipher=sslobj.cipher(),
+                           compression=sslobj.compression(),
+                           ssl_object=sslobj)
+        if self._app_state == AppProtocolState.STATE_INIT:
+            self._app_state = AppProtocolState.STATE_CON_MADE
+            self._app_protocol.connection_made(self._get_app_transport())
+        self._wakeup_waiter()
+        self._do_read()
+
+    # Shutdown flow
+
+    def _start_shutdown(self):
+        if (
+            self._state in (
+                SSLProtocolState.FLUSHING,
+                SSLProtocolState.SHUTDOWN,
+                SSLProtocolState.UNWRAPPED
+            )
+        ):
+            return
+        if self._app_transport is not None:
+            self._app_transport._closed = True
+        if self._state == SSLProtocolState.DO_HANDSHAKE:
+            self._abort(None)
+        else:
+            self._set_state(SSLProtocolState.FLUSHING)
+            self._shutdown_timeout_handle = self._loop.call_later(
+                self._ssl_shutdown_timeout,
+                self._check_shutdown_timeout
+            )
+            self._do_flush()
+
+    def _check_shutdown_timeout(self):
+        if (
+            self._state in (
+                SSLProtocolState.FLUSHING,
+                SSLProtocolState.SHUTDOWN
+            )
+        ):
+            self._transport._force_close(
+                exceptions.TimeoutError('SSL shutdown timed out'))
+
+    def _do_flush(self):
+        self._do_read()
+        self._set_state(SSLProtocolState.SHUTDOWN)
+        self._do_shutdown()
+
+    def _do_shutdown(self):
+        try:
+            if not self._eof_received:
+                self._sslobj.unwrap()
+        except SSLAgainErrors:
+            self._process_outgoing()
+        except ssl.SSLError as exc:
+            self._on_shutdown_complete(exc)
+        else:
+            self._process_outgoing()
+            self._call_eof_received()
+            self._on_shutdown_complete(None)
+
+    def _on_shutdown_complete(self, shutdown_exc):
+        if self._shutdown_timeout_handle is not None:
+            self._shutdown_timeout_handle.cancel()
+            self._shutdown_timeout_handle = None
+
+        if shutdown_exc:
+            self._fatal_error(shutdown_exc)
+        else:
+            self._loop.call_soon(self._transport.close)
+
+    def _abort(self, exc):
+        self._set_state(SSLProtocolState.UNWRAPPED)
+        if self._transport is not None:
+            self._transport._force_close(exc)
+
+    # Outgoing flow
+
+    def _write_appdata(self, list_of_data):
+        if (
+            self._state in (
+                SSLProtocolState.FLUSHING,
+                SSLProtocolState.SHUTDOWN,
+                SSLProtocolState.UNWRAPPED
+            )
+        ):
+            if self._conn_lost >= constants.LOG_THRESHOLD_FOR_CONNLOST_WRITES:
+                logger.warning('SSL connection is closed')
+            self._conn_lost += 1
+            return
+
+        for data in list_of_data:
+            self._write_backlog.append(data)
+            self._write_buffer_size += len(data)
+
+        try:
+            if self._state == SSLProtocolState.WRAPPED:
+                self._do_write()
+
+        except Exception as ex:
+            self._fatal_error(ex, 'Fatal error on SSL protocol')
+
+    def _do_write(self):
+        try:
+            while self._write_backlog:
+                data = self._write_backlog[0]
+                count = self._sslobj.write(data)
+                data_len = len(data)
+                if count < data_len:
+                    self._write_backlog[0] = data[count:]
+                    self._write_buffer_size -= count
+                else:
+                    del self._write_backlog[0]
+                    self._write_buffer_size -= data_len
+        except SSLAgainErrors:
+            pass
+        self._process_outgoing()
+
+    def _process_outgoing(self):
+        if not self._ssl_writing_paused:
+            data = self._outgoing.read()
+            if len(data):
+                self._transport.write(data)
+        self._control_app_writing()
+
+    # Incoming flow
+
+    def _do_read(self):
+        if (
+            self._state not in (
+                SSLProtocolState.WRAPPED,
+                SSLProtocolState.FLUSHING,
+            )
+        ):
+            return
+        try:
+            if not self._app_reading_paused:
+                if self._app_protocol_is_buffer:
+                    self._do_read__buffered()
+                else:
+                    self._do_read__copied()
+                if self._write_backlog:
+                    self._do_write()
+                else:
+                    self._process_outgoing()
+            self._control_ssl_reading()
+        except Exception as ex:
+            self._fatal_error(ex, 'Fatal error on SSL protocol')
+
+    def _do_read__buffered(self):
+        offset = 0
+        count = 1
+
+        buf = self._app_protocol_get_buffer(self._get_read_buffer_size())
+        wants = len(buf)
+
+        try:
+            count = self._sslobj.read(wants, buf)
+
+            if count > 0:
+                offset = count
+                while offset < wants:
+                    count = self._sslobj.read(wants - offset, buf[offset:])
+                    if count > 0:
+                        offset += count
+                    else:
+                        break
+                else:
+                    self._loop.call_soon(self._do_read)
+        except SSLAgainErrors:
+            pass
+        if offset > 0:
+            self._app_protocol_buffer_updated(offset)
+        if not count:
+            # close_notify
+            self._call_eof_received()
+            self._start_shutdown()
+
+    def _do_read__copied(self):
+        chunk = b'1'
+        zero = True
+        one = False
+
+        try:
+            while True:
+                chunk = self._sslobj.read(self.max_size)
+                if not chunk:
+                    break
+                if zero:
+                    zero = False
+                    one = True
+                    first = chunk
+                elif one:
+                    one = False
+                    data = [first, chunk]
+                else:
+                    data.append(chunk)
+        except SSLAgainErrors:
+            pass
+        if one:
+            self._app_protocol.data_received(first)
+        elif not zero:
+            self._app_protocol.data_received(b''.join(data))
+        if not chunk:
+            # close_notify
+            self._call_eof_received()
+            self._start_shutdown()
+
+    def _call_eof_received(self):
+        try:
+            if self._app_state == AppProtocolState.STATE_CON_MADE:
+                self._app_state = AppProtocolState.STATE_EOF
+                keep_open = self._app_protocol.eof_received()
+                if keep_open:
+                    logger.warning('returning true from eof_received() '
+                                   'has no effect when using ssl')
+        except (KeyboardInterrupt, SystemExit):
+            raise
+        except BaseException as ex:
+            self._fatal_error(ex, 'Error calling eof_received()')
+
+    # Flow control for writes from APP socket
+
+    def _control_app_writing(self):
+        size = self._get_write_buffer_size()
+        if size >= self._outgoing_high_water and not self._app_writing_paused:
+            self._app_writing_paused = True
+            try:
+                self._app_protocol.pause_writing()
+            except (KeyboardInterrupt, SystemExit):
+                raise
+            except BaseException as exc:
+                self._loop.call_exception_handler({
+                    'message': 'protocol.pause_writing() failed',
+                    'exception': exc,
+                    'transport': self._app_transport,
+                    'protocol': self,
+                })
+        elif size <= self._outgoing_low_water and self._app_writing_paused:
+            self._app_writing_paused = False
+            try:
+                self._app_protocol.resume_writing()
+            except (KeyboardInterrupt, SystemExit):
+                raise
+            except BaseException as exc:
+                self._loop.call_exception_handler({
+                    'message': 'protocol.resume_writing() failed',
+                    'exception': exc,
+                    'transport': self._app_transport,
+                    'protocol': self,
+                })
+
+    def _get_write_buffer_size(self):
+        return self._outgoing.pending + self._write_buffer_size
+
+    def _set_write_buffer_limits(self, high=None, low=None):
+        high, low = add_flowcontrol_defaults(
+            high, low, constants.FLOW_CONTROL_HIGH_WATER_SSL_WRITE)
+        self._outgoing_high_water = high
+        self._outgoing_low_water = low
+
+    # Flow control for reads to APP socket
+
+    def _pause_reading(self):
+        self._app_reading_paused = True
+
+    def _resume_reading(self):
+        if self._app_reading_paused:
+            self._app_reading_paused = False
+
+            def resume():
+                if self._state == SSLProtocolState.WRAPPED:
+                    self._do_read()
+                elif self._state == SSLProtocolState.FLUSHING:
+                    self._do_flush()
+                elif self._state == SSLProtocolState.SHUTDOWN:
+                    self._do_shutdown()
+            self._loop.call_soon(resume)
+
+    # Flow control for reads from SSL socket
+
+    def _control_ssl_reading(self):
+        size = self._get_read_buffer_size()
+        if size >= self._incoming_high_water and not self._ssl_reading_paused:
+            self._ssl_reading_paused = True
+            self._transport.pause_reading()
+        elif size <= self._incoming_low_water and self._ssl_reading_paused:
+            self._ssl_reading_paused = False
+            self._transport.resume_reading()
+
+    def _set_read_buffer_limits(self, high=None, low=None):
+        high, low = add_flowcontrol_defaults(
+            high, low, constants.FLOW_CONTROL_HIGH_WATER_SSL_READ)
+        self._incoming_high_water = high
+        self._incoming_low_water = low
+
+    def _get_read_buffer_size(self):
+        return self._incoming.pending
+
+    # Flow control for writes to SSL socket
+
+    def pause_writing(self):
+        """Called when the low-level transport's buffer goes over
+        the high-water mark.
+        """
+        assert not self._ssl_writing_paused
+        self._ssl_writing_paused = True
+
+    def resume_writing(self):
+        """Called when the low-level transport's buffer drains below
+        the low-water mark.
+        """
+        assert self._ssl_writing_paused
+        self._ssl_writing_paused = False
+        self._process_outgoing()
+
+    def _fatal_error(self, exc, message='Fatal error on transport'):
+        if self._transport:
+            self._transport._force_close(exc)
+
+        if isinstance(exc, OSError):
+            if self._loop.get_debug():
+                logger.debug("%r: %s", self, message, exc_info=True)
+        elif not isinstance(exc, exceptions.CancelledError):
+            self._loop.call_exception_handler({
+                'message': message,
+                'exception': exc,
+                'transport': self._transport,
+                'protocol': self,
+            })
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/staggered.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/staggered.py
new file mode 100644
index 0000000000000000000000000000000000000000..2ad65d8648e6c52ed6cbb45460cc9db57dffdd3e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/staggered.py
@@ -0,0 +1,179 @@
+"""Support for running coroutines in parallel with staggered start times."""
+
+__all__ = 'staggered_race',
+
+import contextlib
+
+from . import events
+from . import exceptions as exceptions_mod
+from . import locks
+from . import tasks
+from . import futures
+
+
+async def staggered_race(coro_fns, delay, *, loop=None):
+    """Run coroutines with staggered start times and take the first to finish.
+
+    This method takes an iterable of coroutine functions. The first one is
+    started immediately. From then on, whenever the immediately preceding one
+    fails (raises an exception), or when *delay* seconds has passed, the next
+    coroutine is started. This continues until one of the coroutines complete
+    successfully, in which case all others are cancelled, or until all
+    coroutines fail.
+
+    The coroutines provided should be well-behaved in the following way:
+
+    * They should only ``return`` if completed successfully.
+
+    * They should always raise an exception if they did not complete
+      successfully. In particular, if they handle cancellation, they should
+      probably reraise, like this::
+
+        try:
+            # do work
+        except asyncio.CancelledError:
+            # undo partially completed work
+            raise
+
+    Args:
+        coro_fns: an iterable of coroutine functions, i.e. callables that
+            return a coroutine object when called. Use ``functools.partial`` or
+            lambdas to pass arguments.
+
+        delay: amount of time, in seconds, between starting coroutines. If
+            ``None``, the coroutines will run sequentially.
+
+        loop: the event loop to use.
+
+    Returns:
+        tuple *(winner_result, winner_index, exceptions)* where
+
+        - *winner_result*: the result of the winning coroutine, or ``None``
+          if no coroutines won.
+
+        - *winner_index*: the index of the winning coroutine in
+          ``coro_fns``, or ``None`` if no coroutines won. If the winning
+          coroutine may return None on success, *winner_index* can be used
+          to definitively determine whether any coroutine won.
+
+        - *exceptions*: list of exceptions returned by the coroutines.
+          ``len(exceptions)`` is equal to the number of coroutines actually
+          started, and the order is the same as in ``coro_fns``. The winning
+          coroutine's entry is ``None``.
+
+    """
+    # TODO: when we have aiter() and anext(), allow async iterables in coro_fns.
+    loop = loop or events.get_running_loop()
+    parent_task = tasks.current_task(loop)
+    enum_coro_fns = enumerate(coro_fns)
+    winner_result = None
+    winner_index = None
+    unhandled_exceptions = []
+    exceptions = []
+    running_tasks = set()
+    on_completed_fut = None
+
+    def task_done(task):
+        running_tasks.discard(task)
+        futures.future_discard_from_awaited_by(task, parent_task)
+        if (
+            on_completed_fut is not None
+            and not on_completed_fut.done()
+            and not running_tasks
+        ):
+            on_completed_fut.set_result(None)
+
+        if task.cancelled():
+            return
+
+        exc = task.exception()
+        if exc is None:
+            return
+        unhandled_exceptions.append(exc)
+
+    async def run_one_coro(ok_to_start, previous_failed) -> None:
+        # in eager tasks this waits for the calling task to append this task
+        # to running_tasks, in regular tasks this wait is a no-op that does
+        # not yield a future. See gh-124309.
+        await ok_to_start.wait()
+        # Wait for the previous task to finish, or for delay seconds
+        if previous_failed is not None:
+            with contextlib.suppress(exceptions_mod.TimeoutError):
+                # Use asyncio.wait_for() instead of asyncio.wait() here, so
+                # that if we get cancelled at this point, Event.wait() is also
+                # cancelled, otherwise there will be a "Task destroyed but it is
+                # pending" later.
+                await tasks.wait_for(previous_failed.wait(), delay)
+        # Get the next coroutine to run
+        try:
+            this_index, coro_fn = next(enum_coro_fns)
+        except StopIteration:
+            return
+        # Start task that will run the next coroutine
+        this_failed = locks.Event()
+        next_ok_to_start = locks.Event()
+        next_task = loop.create_task(run_one_coro(next_ok_to_start, this_failed))
+        futures.future_add_to_awaited_by(next_task, parent_task)
+        running_tasks.add(next_task)
+        next_task.add_done_callback(task_done)
+        # next_task has been appended to running_tasks so next_task is ok to
+        # start.
+        next_ok_to_start.set()
+        # Prepare place to put this coroutine's exceptions if not won
+        exceptions.append(None)
+        assert len(exceptions) == this_index + 1
+
+        try:
+            result = await coro_fn()
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as e:
+            exceptions[this_index] = e
+            this_failed.set()  # Kickstart the next coroutine
+        else:
+            # Store winner's results
+            nonlocal winner_index, winner_result
+            assert winner_index is None
+            winner_index = this_index
+            winner_result = result
+            # Cancel all other tasks. We take care to not cancel the current
+            # task as well. If we do so, then since there is no `await` after
+            # here and CancelledError are usually thrown at one, we will
+            # encounter a curious corner case where the current task will end
+            # up as done() == True, cancelled() == False, exception() ==
+            # asyncio.CancelledError. This behavior is specified in
+            # https://bugs.python.org/issue30048
+            current_task = tasks.current_task(loop)
+            for t in running_tasks:
+                if t is not current_task:
+                    t.cancel()
+
+    propagate_cancellation_error = None
+    try:
+        ok_to_start = locks.Event()
+        first_task = loop.create_task(run_one_coro(ok_to_start, None))
+        futures.future_add_to_awaited_by(first_task, parent_task)
+        running_tasks.add(first_task)
+        first_task.add_done_callback(task_done)
+        # first_task has been appended to running_tasks so first_task is ok to start.
+        ok_to_start.set()
+        propagate_cancellation_error = None
+        # Make sure no tasks are left running if we leave this function
+        while running_tasks:
+            on_completed_fut = loop.create_future()
+            try:
+                await on_completed_fut
+            except exceptions_mod.CancelledError as ex:
+                propagate_cancellation_error = ex
+                for task in running_tasks:
+                    task.cancel(*ex.args)
+            on_completed_fut = None
+        if __debug__ and unhandled_exceptions:
+            # If run_one_coro raises an unhandled exception, it's probably a
+            # programming error, and I want to see it.
+            raise ExceptionGroup("staggered race failed", unhandled_exceptions)
+        if propagate_cancellation_error is not None:
+            raise propagate_cancellation_error
+        return winner_result, winner_index, exceptions
+    finally:
+        del exceptions, propagate_cancellation_error, unhandled_exceptions, parent_task
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/streams.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/streams.py
new file mode 100644
index 0000000000000000000000000000000000000000..64aac4cc50d15a5e076d5ad43ea8a9017f12a72e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/streams.py
@@ -0,0 +1,787 @@
+__all__ = (
+    'StreamReader', 'StreamWriter', 'StreamReaderProtocol',
+    'open_connection', 'start_server')
+
+import collections
+import socket
+import sys
+import warnings
+import weakref
+
+if hasattr(socket, 'AF_UNIX'):
+    __all__ += ('open_unix_connection', 'start_unix_server')
+
+from . import coroutines
+from . import events
+from . import exceptions
+from . import format_helpers
+from . import protocols
+from .log import logger
+from .tasks import sleep
+
+
+_DEFAULT_LIMIT = 2 ** 16  # 64 KiB
+
+
+async def open_connection(host=None, port=None, *,
+                          limit=_DEFAULT_LIMIT, **kwds):
+    """A wrapper for create_connection() returning a (reader, writer) pair.
+
+    The reader returned is a StreamReader instance; the writer is a
+    StreamWriter instance.
+
+    The arguments are all the usual arguments to create_connection()
+    except protocol_factory; most common are positional host and port,
+    with various optional keyword arguments following.
+
+    Additional optional keyword arguments are loop (to set the event loop
+    instance to use) and limit (to set the buffer limit passed to the
+    StreamReader).
+
+    (If you want to customize the StreamReader and/or
+    StreamReaderProtocol classes, just copy the code -- there's
+    really nothing special here except some convenience.)
+    """
+    loop = events.get_running_loop()
+    reader = StreamReader(limit=limit, loop=loop)
+    protocol = StreamReaderProtocol(reader, loop=loop)
+    transport, _ = await loop.create_connection(
+        lambda: protocol, host, port, **kwds)
+    writer = StreamWriter(transport, protocol, reader, loop)
+    return reader, writer
+
+
+async def start_server(client_connected_cb, host=None, port=None, *,
+                       limit=_DEFAULT_LIMIT, **kwds):
+    """Start a socket server, call back for each client connected.
+
+    The first parameter, `client_connected_cb`, takes two parameters:
+    client_reader, client_writer.  client_reader is a StreamReader
+    object, while client_writer is a StreamWriter object.  This
+    parameter can either be a plain callback function or a coroutine;
+    if it is a coroutine, it will be automatically converted into a
+    Task.
+
+    The rest of the arguments are all the usual arguments to
+    loop.create_server() except protocol_factory; most common are
+    positional host and port, with various optional keyword arguments
+    following.  The return value is the same as loop.create_server().
+
+    Additional optional keyword argument is limit (to set the buffer
+    limit passed to the StreamReader).
+
+    The return value is the same as loop.create_server(), i.e. a
+    Server object which can be used to stop the service.
+    """
+    loop = events.get_running_loop()
+
+    def factory():
+        reader = StreamReader(limit=limit, loop=loop)
+        protocol = StreamReaderProtocol(reader, client_connected_cb,
+                                        loop=loop)
+        return protocol
+
+    return await loop.create_server(factory, host, port, **kwds)
+
+
+if hasattr(socket, 'AF_UNIX'):
+    # UNIX Domain Sockets are supported on this platform
+
+    async def open_unix_connection(path=None, *,
+                                   limit=_DEFAULT_LIMIT, **kwds):
+        """Similar to `open_connection` but works with UNIX Domain Sockets."""
+        loop = events.get_running_loop()
+
+        reader = StreamReader(limit=limit, loop=loop)
+        protocol = StreamReaderProtocol(reader, loop=loop)
+        transport, _ = await loop.create_unix_connection(
+            lambda: protocol, path, **kwds)
+        writer = StreamWriter(transport, protocol, reader, loop)
+        return reader, writer
+
+    async def start_unix_server(client_connected_cb, path=None, *,
+                                limit=_DEFAULT_LIMIT, **kwds):
+        """Similar to `start_server` but works with UNIX Domain Sockets."""
+        loop = events.get_running_loop()
+
+        def factory():
+            reader = StreamReader(limit=limit, loop=loop)
+            protocol = StreamReaderProtocol(reader, client_connected_cb,
+                                            loop=loop)
+            return protocol
+
+        return await loop.create_unix_server(factory, path, **kwds)
+
+
+class FlowControlMixin(protocols.Protocol):
+    """Reusable flow control logic for StreamWriter.drain().
+
+    This implements the protocol methods pause_writing(),
+    resume_writing() and connection_lost().  If the subclass overrides
+    these it must call the super methods.
+
+    StreamWriter.drain() must wait for _drain_helper() coroutine.
+    """
+
+    def __init__(self, loop=None):
+        if loop is None:
+            self._loop = events.get_event_loop()
+        else:
+            self._loop = loop
+        self._paused = False
+        self._drain_waiters = collections.deque()
+        self._connection_lost = False
+
+    def pause_writing(self):
+        assert not self._paused
+        self._paused = True
+        if self._loop.get_debug():
+            logger.debug("%r pauses writing", self)
+
+    def resume_writing(self):
+        assert self._paused
+        self._paused = False
+        if self._loop.get_debug():
+            logger.debug("%r resumes writing", self)
+
+        for waiter in self._drain_waiters:
+            if not waiter.done():
+                waiter.set_result(None)
+
+    def connection_lost(self, exc):
+        self._connection_lost = True
+        # Wake up the writer(s) if currently paused.
+        if not self._paused:
+            return
+
+        for waiter in self._drain_waiters:
+            if not waiter.done():
+                if exc is None:
+                    waiter.set_result(None)
+                else:
+                    waiter.set_exception(exc)
+
+    async def _drain_helper(self):
+        if self._connection_lost:
+            raise ConnectionResetError('Connection lost')
+        if not self._paused:
+            return
+        waiter = self._loop.create_future()
+        self._drain_waiters.append(waiter)
+        try:
+            await waiter
+        finally:
+            self._drain_waiters.remove(waiter)
+
+    def _get_close_waiter(self, stream):
+        raise NotImplementedError
+
+
+class StreamReaderProtocol(FlowControlMixin, protocols.Protocol):
+    """Helper class to adapt between Protocol and StreamReader.
+
+    (This is a helper class instead of making StreamReader itself a
+    Protocol subclass, because the StreamReader has other potential
+    uses, and to prevent the user of the StreamReader to accidentally
+    call inappropriate methods of the protocol.)
+    """
+
+    _source_traceback = None
+
+    def __init__(self, stream_reader, client_connected_cb=None, loop=None):
+        super().__init__(loop=loop)
+        if stream_reader is not None:
+            self._stream_reader_wr = weakref.ref(stream_reader)
+            self._source_traceback = stream_reader._source_traceback
+        else:
+            self._stream_reader_wr = None
+        if client_connected_cb is not None:
+            # This is a stream created by the `create_server()` function.
+            # Keep a strong reference to the reader until a connection
+            # is established.
+            self._strong_reader = stream_reader
+        self._reject_connection = False
+        self._task = None
+        self._transport = None
+        self._client_connected_cb = client_connected_cb
+        self._over_ssl = False
+        self._closed = self._loop.create_future()
+
+    @property
+    def _stream_reader(self):
+        if self._stream_reader_wr is None:
+            return None
+        return self._stream_reader_wr()
+
+    def _replace_transport(self, transport):
+        loop = self._loop
+        self._transport = transport
+        self._over_ssl = transport.get_extra_info('sslcontext') is not None
+
+    def connection_made(self, transport):
+        if self._reject_connection:
+            context = {
+                'message': ('An open stream was garbage collected prior to '
+                            'establishing network connection; '
+                            'call "stream.close()" explicitly.')
+            }
+            if self._source_traceback:
+                context['source_traceback'] = self._source_traceback
+            self._loop.call_exception_handler(context)
+            transport.abort()
+            return
+        self._transport = transport
+        reader = self._stream_reader
+        if reader is not None:
+            reader.set_transport(transport)
+        self._over_ssl = transport.get_extra_info('sslcontext') is not None
+        if self._client_connected_cb is not None:
+            writer = StreamWriter(transport, self, reader, self._loop)
+            res = self._client_connected_cb(reader, writer)
+            if coroutines.iscoroutine(res):
+                def callback(task):
+                    if task.cancelled():
+                        transport.close()
+                        return
+                    exc = task.exception()
+                    if exc is not None:
+                        self._loop.call_exception_handler({
+                            'message': 'Unhandled exception in client_connected_cb',
+                            'exception': exc,
+                            'transport': transport,
+                        })
+                        transport.close()
+
+                self._task = self._loop.create_task(res)
+                self._task.add_done_callback(callback)
+
+            self._strong_reader = None
+
+    def connection_lost(self, exc):
+        reader = self._stream_reader
+        if reader is not None:
+            if exc is None:
+                reader.feed_eof()
+            else:
+                reader.set_exception(exc)
+        if not self._closed.done():
+            if exc is None:
+                self._closed.set_result(None)
+            else:
+                self._closed.set_exception(exc)
+        super().connection_lost(exc)
+        self._stream_reader_wr = None
+        self._stream_writer = None
+        self._task = None
+        self._transport = None
+
+    def data_received(self, data):
+        reader = self._stream_reader
+        if reader is not None:
+            reader.feed_data(data)
+
+    def eof_received(self):
+        reader = self._stream_reader
+        if reader is not None:
+            reader.feed_eof()
+        if self._over_ssl:
+            # Prevent a warning in SSLProtocol.eof_received:
+            # "returning true from eof_received()
+            # has no effect when using ssl"
+            return False
+        return True
+
+    def _get_close_waiter(self, stream):
+        return self._closed
+
+    def __del__(self):
+        # Prevent reports about unhandled exceptions.
+        # Better than self._closed._log_traceback = False hack
+        try:
+            closed = self._closed
+        except AttributeError:
+            pass  # failed constructor
+        else:
+            if closed.done() and not closed.cancelled():
+                closed.exception()
+
+
+class StreamWriter:
+    """Wraps a Transport.
+
+    This exposes write(), writelines(), [can_]write_eof(),
+    get_extra_info() and close().  It adds drain() which returns an
+    optional Future on which you can wait for flow control.  It also
+    adds a transport property which references the Transport
+    directly.
+    """
+
+    def __init__(self, transport, protocol, reader, loop):
+        self._transport = transport
+        self._protocol = protocol
+        # drain() expects that the reader has an exception() method
+        assert reader is None or isinstance(reader, StreamReader)
+        self._reader = reader
+        self._loop = loop
+        self._complete_fut = self._loop.create_future()
+        self._complete_fut.set_result(None)
+
+    def __repr__(self):
+        info = [self.__class__.__name__, f'transport={self._transport!r}']
+        if self._reader is not None:
+            info.append(f'reader={self._reader!r}')
+        return '<{}>'.format(' '.join(info))
+
+    @property
+    def transport(self):
+        return self._transport
+
+    def write(self, data):
+        self._transport.write(data)
+
+    def writelines(self, data):
+        self._transport.writelines(data)
+
+    def write_eof(self):
+        return self._transport.write_eof()
+
+    def can_write_eof(self):
+        return self._transport.can_write_eof()
+
+    def close(self):
+        return self._transport.close()
+
+    def is_closing(self):
+        return self._transport.is_closing()
+
+    async def wait_closed(self):
+        await self._protocol._get_close_waiter(self)
+
+    def get_extra_info(self, name, default=None):
+        return self._transport.get_extra_info(name, default)
+
+    async def drain(self):
+        """Flush the write buffer.
+
+        The intended use is to write
+
+          w.write(data)
+          await w.drain()
+        """
+        if self._reader is not None:
+            exc = self._reader.exception()
+            if exc is not None:
+                raise exc
+        if self._transport.is_closing():
+            # Wait for protocol.connection_lost() call
+            # Raise connection closing error if any,
+            # ConnectionResetError otherwise
+            # Yield to the event loop so connection_lost() may be
+            # called.  Without this, _drain_helper() would return
+            # immediately, and code that calls
+            #     write(...); await drain()
+            # in a loop would never call connection_lost(), so it
+            # would not see an error when the socket is closed.
+            await sleep(0)
+        await self._protocol._drain_helper()
+
+    async def start_tls(self, sslcontext, *,
+                        server_hostname=None,
+                        ssl_handshake_timeout=None,
+                        ssl_shutdown_timeout=None):
+        """Upgrade an existing stream-based connection to TLS."""
+        server_side = self._protocol._client_connected_cb is not None
+        protocol = self._protocol
+        await self.drain()
+        new_transport = await self._loop.start_tls(  # type: ignore
+            self._transport, protocol, sslcontext,
+            server_side=server_side, server_hostname=server_hostname,
+            ssl_handshake_timeout=ssl_handshake_timeout,
+            ssl_shutdown_timeout=ssl_shutdown_timeout)
+        self._transport = new_transport
+        protocol._replace_transport(new_transport)
+
+    def __del__(self, warnings=warnings):
+        if not self._transport.is_closing():
+            if self._loop.is_closed():
+                warnings.warn("loop is closed", ResourceWarning)
+            else:
+                self.close()
+                warnings.warn(f"unclosed {self!r}", ResourceWarning)
+
+class StreamReader:
+
+    _source_traceback = None
+
+    def __init__(self, limit=_DEFAULT_LIMIT, loop=None):
+        # The line length limit is  a security feature;
+        # it also doubles as half the buffer limit.
+
+        if limit <= 0:
+            raise ValueError('Limit cannot be <= 0')
+
+        self._limit = limit
+        if loop is None:
+            self._loop = events.get_event_loop()
+        else:
+            self._loop = loop
+        self._buffer = bytearray()
+        self._eof = False    # Whether we're done.
+        self._waiter = None  # A future used by _wait_for_data()
+        self._exception = None
+        self._transport = None
+        self._paused = False
+        if self._loop.get_debug():
+            self._source_traceback = format_helpers.extract_stack(
+                sys._getframe(1))
+
+    def __repr__(self):
+        info = ['StreamReader']
+        if self._buffer:
+            info.append(f'{len(self._buffer)} bytes')
+        if self._eof:
+            info.append('eof')
+        if self._limit != _DEFAULT_LIMIT:
+            info.append(f'limit={self._limit}')
+        if self._waiter:
+            info.append(f'waiter={self._waiter!r}')
+        if self._exception:
+            info.append(f'exception={self._exception!r}')
+        if self._transport:
+            info.append(f'transport={self._transport!r}')
+        if self._paused:
+            info.append('paused')
+        return '<{}>'.format(' '.join(info))
+
+    def exception(self):
+        return self._exception
+
+    def set_exception(self, exc):
+        self._exception = exc
+
+        waiter = self._waiter
+        if waiter is not None:
+            self._waiter = None
+            if not waiter.cancelled():
+                waiter.set_exception(exc)
+
+    def _wakeup_waiter(self):
+        """Wakeup read*() functions waiting for data or EOF."""
+        waiter = self._waiter
+        if waiter is not None:
+            self._waiter = None
+            if not waiter.cancelled():
+                waiter.set_result(None)
+
+    def set_transport(self, transport):
+        assert self._transport is None, 'Transport already set'
+        self._transport = transport
+
+    def _maybe_resume_transport(self):
+        if self._paused and len(self._buffer) <= self._limit:
+            self._paused = False
+            self._transport.resume_reading()
+
+    def feed_eof(self):
+        self._eof = True
+        self._wakeup_waiter()
+
+    def at_eof(self):
+        """Return True if the buffer is empty and 'feed_eof' was called."""
+        return self._eof and not self._buffer
+
+    def feed_data(self, data):
+        assert not self._eof, 'feed_data after feed_eof'
+
+        if not data:
+            return
+
+        self._buffer.extend(data)
+        self._wakeup_waiter()
+
+        if (self._transport is not None and
+                not self._paused and
+                len(self._buffer) > 2 * self._limit):
+            try:
+                self._transport.pause_reading()
+            except NotImplementedError:
+                # The transport can't be paused.
+                # We'll just have to buffer all data.
+                # Forget the transport so we don't keep trying.
+                self._transport = None
+            else:
+                self._paused = True
+
+    async def _wait_for_data(self, func_name):
+        """Wait until feed_data() or feed_eof() is called.
+
+        If stream was paused, automatically resume it.
+        """
+        # StreamReader uses a future to link the protocol feed_data() method
+        # to a read coroutine. Running two read coroutines at the same time
+        # would have an unexpected behaviour. It would not possible to know
+        # which coroutine would get the next data.
+        if self._waiter is not None:
+            raise RuntimeError(
+                f'{func_name}() called while another coroutine is '
+                f'already waiting for incoming data')
+
+        assert not self._eof, '_wait_for_data after EOF'
+
+        # Waiting for data while paused will make deadlock, so prevent it.
+        # This is essential for readexactly(n) for case when n > self._limit.
+        if self._paused:
+            self._paused = False
+            self._transport.resume_reading()
+
+        self._waiter = self._loop.create_future()
+        try:
+            await self._waiter
+        finally:
+            self._waiter = None
+
+    async def readline(self):
+        """Read chunk of data from the stream until newline (b'\n') is found.
+
+        On success, return chunk that ends with newline. If only partial
+        line can be read due to EOF, return incomplete line without
+        terminating newline. When EOF was reached while no bytes read, empty
+        bytes object is returned.
+
+        If limit is reached, ValueError will be raised. In that case, if
+        newline was found, complete line including newline will be removed
+        from internal buffer. Else, internal buffer will be cleared. Limit is
+        compared against part of the line without newline.
+
+        If stream was paused, this function will automatically resume it if
+        needed.
+        """
+        sep = b'\n'
+        seplen = len(sep)
+        try:
+            line = await self.readuntil(sep)
+        except exceptions.IncompleteReadError as e:
+            return e.partial
+        except exceptions.LimitOverrunError as e:
+            if self._buffer.startswith(sep, e.consumed):
+                del self._buffer[:e.consumed + seplen]
+            else:
+                self._buffer.clear()
+            self._maybe_resume_transport()
+            raise ValueError(e.args[0])
+        return line
+
+    async def readuntil(self, separator=b'\n'):
+        """Read data from the stream until ``separator`` is found.
+
+        On success, the data and separator will be removed from the
+        internal buffer (consumed). Returned data will include the
+        separator at the end.
+
+        Configured stream limit is used to check result. Limit sets the
+        maximal length of data that can be returned, not counting the
+        separator.
+
+        If an EOF occurs and the complete separator is still not found,
+        an IncompleteReadError exception will be raised, and the internal
+        buffer will be reset.  The IncompleteReadError.partial attribute
+        may contain the separator partially.
+
+        If the data cannot be read because of over limit, a
+        LimitOverrunError exception  will be raised, and the data
+        will be left in the internal buffer, so it can be read again.
+
+        The ``separator`` may also be a tuple of separators. In this
+        case the return value will be the shortest possible that has any
+        separator as the suffix. For the purposes of LimitOverrunError,
+        the shortest possible separator is considered to be the one that
+        matched.
+        """
+        if isinstance(separator, tuple):
+            # Makes sure shortest matches wins
+            separator = sorted(separator, key=len)
+        else:
+            separator = [separator]
+        if not separator:
+            raise ValueError('Separator should contain at least one element')
+        min_seplen = len(separator[0])
+        max_seplen = len(separator[-1])
+        if min_seplen == 0:
+            raise ValueError('Separator should be at least one-byte string')
+
+        if self._exception is not None:
+            raise self._exception
+
+        # Consume whole buffer except last bytes, which length is
+        # one less than max_seplen. Let's check corner cases with
+        # separator[-1]='SEPARATOR':
+        # * we have received almost complete separator (without last
+        #   byte). i.e buffer='some textSEPARATO'. In this case we
+        #   can safely consume max_seplen - 1 bytes.
+        # * last byte of buffer is first byte of separator, i.e.
+        #   buffer='abcdefghijklmnopqrS'. We may safely consume
+        #   everything except that last byte, but this require to
+        #   analyze bytes of buffer that match partial separator.
+        #   This is slow and/or require FSM. For this case our
+        #   implementation is not optimal, since require rescanning
+        #   of data that is known to not belong to separator. In
+        #   real world, separator will not be so long to notice
+        #   performance problems. Even when reading MIME-encoded
+        #   messages :)
+
+        # `offset` is the number of bytes from the beginning of the buffer
+        # where there is no occurrence of any `separator`.
+        offset = 0
+
+        # Loop until we find a `separator` in the buffer, exceed the buffer size,
+        # or an EOF has happened.
+        while True:
+            buflen = len(self._buffer)
+
+            # Check if we now have enough data in the buffer for shortest
+            # separator to fit.
+            if buflen - offset >= min_seplen:
+                match_start = None
+                match_end = None
+                for sep in separator:
+                    isep = self._buffer.find(sep, offset)
+
+                    if isep != -1:
+                        # `separator` is in the buffer. `match_start` and
+                        # `match_end` will be used later to retrieve the
+                        # data.
+                        end = isep + len(sep)
+                        if match_end is None or end < match_end:
+                            match_end = end
+                            match_start = isep
+                if match_end is not None:
+                    break
+
+                # see upper comment for explanation.
+                offset = max(0, buflen + 1 - max_seplen)
+                if offset > self._limit:
+                    raise exceptions.LimitOverrunError(
+                        'Separator is not found, and chunk exceed the limit',
+                        offset)
+
+            # Complete message (with full separator) may be present in buffer
+            # even when EOF flag is set. This may happen when the last chunk
+            # adds data which makes separator be found. That's why we check for
+            # EOF *after* inspecting the buffer.
+            if self._eof:
+                chunk = bytes(self._buffer)
+                self._buffer.clear()
+                raise exceptions.IncompleteReadError(chunk, None)
+
+            # _wait_for_data() will resume reading if stream was paused.
+            await self._wait_for_data('readuntil')
+
+        if match_start > self._limit:
+            raise exceptions.LimitOverrunError(
+                'Separator is found, but chunk is longer than limit', match_start)
+
+        chunk = self._buffer[:match_end]
+        del self._buffer[:match_end]
+        self._maybe_resume_transport()
+        return bytes(chunk)
+
+    async def read(self, n=-1):
+        """Read up to `n` bytes from the stream.
+
+        If `n` is not provided or set to -1,
+        read until EOF, then return all read bytes.
+        If EOF was received and the internal buffer is empty,
+        return an empty bytes object.
+
+        If `n` is 0, return an empty bytes object immediately.
+
+        If `n` is positive, return at most `n` available bytes
+        as soon as at least 1 byte is available in the internal buffer.
+        If EOF is received before any byte is read, return an empty
+        bytes object.
+
+        Returned value is not limited with limit, configured at stream
+        creation.
+
+        If stream was paused, this function will automatically resume it if
+        needed.
+        """
+
+        if self._exception is not None:
+            raise self._exception
+
+        if n == 0:
+            return b''
+
+        if n < 0:
+            # This used to just loop creating a new waiter hoping to
+            # collect everything in self._buffer, but that would
+            # deadlock if the subprocess sends more than self.limit
+            # bytes.  So just call self.read(self._limit) until EOF.
+            blocks = []
+            while True:
+                block = await self.read(self._limit)
+                if not block:
+                    break
+                blocks.append(block)
+            return b''.join(blocks)
+
+        if not self._buffer and not self._eof:
+            await self._wait_for_data('read')
+
+        # This will work right even if buffer is less than n bytes
+        data = bytes(memoryview(self._buffer)[:n])
+        del self._buffer[:n]
+
+        self._maybe_resume_transport()
+        return data
+
+    async def readexactly(self, n):
+        """Read exactly `n` bytes.
+
+        Raise an IncompleteReadError if EOF is reached before `n` bytes can be
+        read. The IncompleteReadError.partial attribute of the exception will
+        contain the partial read bytes.
+
+        if n is zero, return empty bytes object.
+
+        Returned value is not limited with limit, configured at stream
+        creation.
+
+        If stream was paused, this function will automatically resume it if
+        needed.
+        """
+        if n < 0:
+            raise ValueError('readexactly size can not be less than zero')
+
+        if self._exception is not None:
+            raise self._exception
+
+        if n == 0:
+            return b''
+
+        while len(self._buffer) < n:
+            if self._eof:
+                incomplete = bytes(self._buffer)
+                self._buffer.clear()
+                raise exceptions.IncompleteReadError(incomplete, n)
+
+            await self._wait_for_data('readexactly')
+
+        if len(self._buffer) == n:
+            data = bytes(self._buffer)
+            self._buffer.clear()
+        else:
+            data = bytes(memoryview(self._buffer)[:n])
+            del self._buffer[:n]
+        self._maybe_resume_transport()
+        return data
+
+    def __aiter__(self):
+        return self
+
+    async def __anext__(self):
+        val = await self.readline()
+        if val == b'':
+            raise StopAsyncIteration
+        return val
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/subprocess.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/subprocess.py
new file mode 100644
index 0000000000000000000000000000000000000000..043359bbd03f8aa8354059f1ba9b0c44400fbedf
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/subprocess.py
@@ -0,0 +1,229 @@
+__all__ = 'create_subprocess_exec', 'create_subprocess_shell'
+
+import subprocess
+
+from . import events
+from . import protocols
+from . import streams
+from . import tasks
+from .log import logger
+
+
+PIPE = subprocess.PIPE
+STDOUT = subprocess.STDOUT
+DEVNULL = subprocess.DEVNULL
+
+
+class SubprocessStreamProtocol(streams.FlowControlMixin,
+                               protocols.SubprocessProtocol):
+    """Like StreamReaderProtocol, but for a subprocess."""
+
+    def __init__(self, limit, loop):
+        super().__init__(loop=loop)
+        self._limit = limit
+        self.stdin = self.stdout = self.stderr = None
+        self._transport = None
+        self._process_exited = False
+        self._pipe_fds = []
+        self._stdin_closed = self._loop.create_future()
+
+    def __repr__(self):
+        info = [self.__class__.__name__]
+        if self.stdin is not None:
+            info.append(f'stdin={self.stdin!r}')
+        if self.stdout is not None:
+            info.append(f'stdout={self.stdout!r}')
+        if self.stderr is not None:
+            info.append(f'stderr={self.stderr!r}')
+        return '<{}>'.format(' '.join(info))
+
+    def connection_made(self, transport):
+        self._transport = transport
+
+        stdout_transport = transport.get_pipe_transport(1)
+        if stdout_transport is not None:
+            self.stdout = streams.StreamReader(limit=self._limit,
+                                               loop=self._loop)
+            self.stdout.set_transport(stdout_transport)
+            self._pipe_fds.append(1)
+
+        stderr_transport = transport.get_pipe_transport(2)
+        if stderr_transport is not None:
+            self.stderr = streams.StreamReader(limit=self._limit,
+                                               loop=self._loop)
+            self.stderr.set_transport(stderr_transport)
+            self._pipe_fds.append(2)
+
+        stdin_transport = transport.get_pipe_transport(0)
+        if stdin_transport is not None:
+            self.stdin = streams.StreamWriter(stdin_transport,
+                                              protocol=self,
+                                              reader=None,
+                                              loop=self._loop)
+
+    def pipe_data_received(self, fd, data):
+        if fd == 1:
+            reader = self.stdout
+        elif fd == 2:
+            reader = self.stderr
+        else:
+            reader = None
+        if reader is not None:
+            reader.feed_data(data)
+
+    def pipe_connection_lost(self, fd, exc):
+        if fd == 0:
+            pipe = self.stdin
+            if pipe is not None:
+                pipe.close()
+            self.connection_lost(exc)
+            if exc is None:
+                self._stdin_closed.set_result(None)
+            else:
+                self._stdin_closed.set_exception(exc)
+                # Since calling `wait_closed()` is not mandatory,
+                # we shouldn't log the traceback if this is not awaited.
+                self._stdin_closed._log_traceback = False
+            return
+        if fd == 1:
+            reader = self.stdout
+        elif fd == 2:
+            reader = self.stderr
+        else:
+            reader = None
+        if reader is not None:
+            if exc is None:
+                reader.feed_eof()
+            else:
+                reader.set_exception(exc)
+
+        if fd in self._pipe_fds:
+            self._pipe_fds.remove(fd)
+        self._maybe_close_transport()
+
+    def process_exited(self):
+        self._process_exited = True
+        self._maybe_close_transport()
+
+    def _maybe_close_transport(self):
+        if len(self._pipe_fds) == 0 and self._process_exited:
+            self._transport.close()
+            self._transport = None
+
+    def _get_close_waiter(self, stream):
+        if stream is self.stdin:
+            return self._stdin_closed
+
+
+class Process:
+    def __init__(self, transport, protocol, loop):
+        self._transport = transport
+        self._protocol = protocol
+        self._loop = loop
+        self.stdin = protocol.stdin
+        self.stdout = protocol.stdout
+        self.stderr = protocol.stderr
+        self.pid = transport.get_pid()
+
+    def __repr__(self):
+        return f'<{self.__class__.__name__} {self.pid}>'
+
+    @property
+    def returncode(self):
+        return self._transport.get_returncode()
+
+    async def wait(self):
+        """Wait until the process exit and return the process return code."""
+        return await self._transport._wait()
+
+    def send_signal(self, signal):
+        self._transport.send_signal(signal)
+
+    def terminate(self):
+        self._transport.terminate()
+
+    def kill(self):
+        self._transport.kill()
+
+    async def _feed_stdin(self, input):
+        debug = self._loop.get_debug()
+        try:
+            if input is not None:
+                self.stdin.write(input)
+                if debug:
+                    logger.debug(
+                        '%r communicate: feed stdin (%s bytes)', self, len(input))
+
+            await self.stdin.drain()
+        except (BrokenPipeError, ConnectionResetError) as exc:
+            # communicate() ignores BrokenPipeError and ConnectionResetError.
+            # write() and drain() can raise these exceptions.
+            if debug:
+                logger.debug('%r communicate: stdin got %r', self, exc)
+
+        if debug:
+            logger.debug('%r communicate: close stdin', self)
+        self.stdin.close()
+
+    async def _noop(self):
+        return None
+
+    async def _read_stream(self, fd):
+        transport = self._transport.get_pipe_transport(fd)
+        if fd == 2:
+            stream = self.stderr
+        else:
+            assert fd == 1
+            stream = self.stdout
+        if self._loop.get_debug():
+            name = 'stdout' if fd == 1 else 'stderr'
+            logger.debug('%r communicate: read %s', self, name)
+        output = await stream.read()
+        if self._loop.get_debug():
+            name = 'stdout' if fd == 1 else 'stderr'
+            logger.debug('%r communicate: close %s', self, name)
+        transport.close()
+        return output
+
+    async def communicate(self, input=None):
+        if self.stdin is not None:
+            stdin = self._feed_stdin(input)
+        else:
+            stdin = self._noop()
+        if self.stdout is not None:
+            stdout = self._read_stream(1)
+        else:
+            stdout = self._noop()
+        if self.stderr is not None:
+            stderr = self._read_stream(2)
+        else:
+            stderr = self._noop()
+        stdin, stdout, stderr = await tasks.gather(stdin, stdout, stderr)
+        await self.wait()
+        return (stdout, stderr)
+
+
+async def create_subprocess_shell(cmd, stdin=None, stdout=None, stderr=None,
+                                  limit=streams._DEFAULT_LIMIT, **kwds):
+    loop = events.get_running_loop()
+    protocol_factory = lambda: SubprocessStreamProtocol(limit=limit,
+                                                        loop=loop)
+    transport, protocol = await loop.subprocess_shell(
+        protocol_factory,
+        cmd, stdin=stdin, stdout=stdout,
+        stderr=stderr, **kwds)
+    return Process(transport, protocol, loop)
+
+
+async def create_subprocess_exec(program, *args, stdin=None, stdout=None,
+                                 stderr=None, limit=streams._DEFAULT_LIMIT,
+                                 **kwds):
+    loop = events.get_running_loop()
+    protocol_factory = lambda: SubprocessStreamProtocol(limit=limit,
+                                                        loop=loop)
+    transport, protocol = await loop.subprocess_exec(
+        protocol_factory,
+        program, *args,
+        stdin=stdin, stdout=stdout,
+        stderr=stderr, **kwds)
+    return Process(transport, protocol, loop)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/taskgroups.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/taskgroups.py
new file mode 100644
index 0000000000000000000000000000000000000000..00e8f6d5d1a68b2028e9304e19cc3006bf1f2c49
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/taskgroups.py
@@ -0,0 +1,280 @@
+# Adapted with permission from the EdgeDB project;
+# license: PSFL.
+
+
+__all__ = ("TaskGroup",)
+
+from . import events
+from . import exceptions
+from . import futures
+from . import tasks
+
+
+class TaskGroup:
+    """Asynchronous context manager for managing groups of tasks.
+
+    Example use:
+
+        async with asyncio.TaskGroup() as group:
+            task1 = group.create_task(some_coroutine(...))
+            task2 = group.create_task(other_coroutine(...))
+        print("Both tasks have completed now.")
+
+    All tasks are awaited when the context manager exits.
+
+    Any exceptions other than `asyncio.CancelledError` raised within
+    a task will cancel all remaining tasks and wait for them to exit.
+    The exceptions are then combined and raised as an `ExceptionGroup`.
+    """
+    def __init__(self):
+        self._entered = False
+        self._exiting = False
+        self._aborting = False
+        self._loop = None
+        self._parent_task = None
+        self._parent_cancel_requested = False
+        self._tasks = set()
+        self._errors = []
+        self._base_error = None
+        self._on_completed_fut = None
+
+    def __repr__(self):
+        info = ['']
+        if self._tasks:
+            info.append(f'tasks={len(self._tasks)}')
+        if self._errors:
+            info.append(f'errors={len(self._errors)}')
+        if self._aborting:
+            info.append('cancelling')
+        elif self._entered:
+            info.append('entered')
+
+        info_str = ' '.join(info)
+        return f'<TaskGroup{info_str}>'
+
+    async def __aenter__(self):
+        if self._entered:
+            raise RuntimeError(
+                f"TaskGroup {self!r} has already been entered")
+        if self._loop is None:
+            self._loop = events.get_running_loop()
+        self._parent_task = tasks.current_task(self._loop)
+        if self._parent_task is None:
+            raise RuntimeError(
+                f'TaskGroup {self!r} cannot determine the parent task')
+        self._entered = True
+
+        return self
+
+    async def __aexit__(self, et, exc, tb):
+        tb = None
+        try:
+            return await self._aexit(et, exc)
+        finally:
+            # Exceptions are heavy objects that can have object
+            # cycles (bad for GC); let's not keep a reference to
+            # a bunch of them. It would be nicer to use a try/finally
+            # in __aexit__ directly but that introduced some diff noise
+            self._parent_task = None
+            self._errors = None
+            self._base_error = None
+            exc = None
+
+    async def _aexit(self, et, exc):
+        self._exiting = True
+
+        if (exc is not None and
+                self._is_base_error(exc) and
+                self._base_error is None):
+            self._base_error = exc
+
+        if et is not None and issubclass(et, exceptions.CancelledError):
+            propagate_cancellation_error = exc
+        else:
+            propagate_cancellation_error = None
+
+        if et is not None:
+            if not self._aborting:
+                # Our parent task is being cancelled:
+                #
+                #    async with TaskGroup() as g:
+                #        g.create_task(...)
+                #        await ...  # <- CancelledError
+                #
+                # or there's an exception in "async with":
+                #
+                #    async with TaskGroup() as g:
+                #        g.create_task(...)
+                #        1 / 0
+                #
+                self._abort()
+
+        # We use while-loop here because "self._on_completed_fut"
+        # can be cancelled multiple times if our parent task
+        # is being cancelled repeatedly (or even once, when
+        # our own cancellation is already in progress)
+        while self._tasks:
+            if self._on_completed_fut is None:
+                self._on_completed_fut = self._loop.create_future()
+
+            try:
+                await self._on_completed_fut
+            except exceptions.CancelledError as ex:
+                if not self._aborting:
+                    # Our parent task is being cancelled:
+                    #
+                    #    async def wrapper():
+                    #        async with TaskGroup() as g:
+                    #            g.create_task(foo)
+                    #
+                    # "wrapper" is being cancelled while "foo" is
+                    # still running.
+                    propagate_cancellation_error = ex
+                    self._abort()
+
+            self._on_completed_fut = None
+
+        assert not self._tasks
+
+        if self._base_error is not None:
+            try:
+                raise self._base_error
+            finally:
+                exc = None
+
+        if self._parent_cancel_requested:
+            # If this flag is set we *must* call uncancel().
+            if self._parent_task.uncancel() == 0:
+                # If there are no pending cancellations left,
+                # don't propagate CancelledError.
+                propagate_cancellation_error = None
+
+        # Propagate CancelledError if there is one, except if there
+        # are other errors -- those have priority.
+        try:
+            if propagate_cancellation_error is not None and not self._errors:
+                try:
+                    raise propagate_cancellation_error
+                finally:
+                    exc = None
+        finally:
+            propagate_cancellation_error = None
+
+        if et is not None and not issubclass(et, exceptions.CancelledError):
+            self._errors.append(exc)
+
+        if self._errors:
+            # If the parent task is being cancelled from the outside
+            # of the taskgroup, un-cancel and re-cancel the parent task,
+            # which will keep the cancel count stable.
+            if self._parent_task.cancelling():
+                self._parent_task.uncancel()
+                self._parent_task.cancel()
+            try:
+                raise BaseExceptionGroup(
+                    'unhandled errors in a TaskGroup',
+                    self._errors,
+                ) from None
+            finally:
+                exc = None
+
+
+    def create_task(self, coro, **kwargs):
+        """Create a new task in this group and return it.
+
+        Similar to `asyncio.create_task`.
+        """
+        if not self._entered:
+            coro.close()
+            raise RuntimeError(f"TaskGroup {self!r} has not been entered")
+        if self._exiting and not self._tasks:
+            coro.close()
+            raise RuntimeError(f"TaskGroup {self!r} is finished")
+        if self._aborting:
+            coro.close()
+            raise RuntimeError(f"TaskGroup {self!r} is shutting down")
+        task = self._loop.create_task(coro, **kwargs)
+
+        futures.future_add_to_awaited_by(task, self._parent_task)
+
+        # Always schedule the done callback even if the task is
+        # already done (e.g. if the coro was able to complete eagerly),
+        # otherwise if the task completes with an exception then it will cancel
+        # the current task too early. gh-128550, gh-128588
+        self._tasks.add(task)
+        task.add_done_callback(self._on_task_done)
+        try:
+            return task
+        finally:
+            # gh-128552: prevent a refcycle of
+            # task.exception().__traceback__->TaskGroup.create_task->task
+            del task
+
+    # Since Python 3.8 Tasks propagate all exceptions correctly,
+    # except for KeyboardInterrupt and SystemExit which are
+    # still considered special.
+
+    def _is_base_error(self, exc: BaseException) -> bool:
+        assert isinstance(exc, BaseException)
+        return isinstance(exc, (SystemExit, KeyboardInterrupt))
+
+    def _abort(self):
+        self._aborting = True
+
+        for t in self._tasks:
+            if not t.done():
+                t.cancel()
+
+    def _on_task_done(self, task):
+        self._tasks.discard(task)
+
+        futures.future_discard_from_awaited_by(task, self._parent_task)
+
+        if self._on_completed_fut is not None and not self._tasks:
+            if not self._on_completed_fut.done():
+                self._on_completed_fut.set_result(True)
+
+        if task.cancelled():
+            return
+
+        exc = task.exception()
+        if exc is None:
+            return
+
+        self._errors.append(exc)
+        if self._is_base_error(exc) and self._base_error is None:
+            self._base_error = exc
+
+        if self._parent_task.done():
+            # Not sure if this case is possible, but we want to handle
+            # it anyways.
+            self._loop.call_exception_handler({
+                'message': f'Task {task!r} has errored out but its parent '
+                           f'task {self._parent_task} is already completed',
+                'exception': exc,
+                'task': task,
+            })
+            return
+
+        if not self._aborting and not self._parent_cancel_requested:
+            # If parent task *is not* being cancelled, it means that we want
+            # to manually cancel it to abort whatever is being run right now
+            # in the TaskGroup.  But we want to mark parent task as
+            # "not cancelled" later in __aexit__.  Example situation that
+            # we need to handle:
+            #
+            #    async def foo():
+            #        try:
+            #            async with TaskGroup() as g:
+            #                g.create_task(crash_soon())
+            #                await something  # <- this needs to be canceled
+            #                                 #    by the TaskGroup, e.g.
+            #                                 #    foo() needs to be cancelled
+            #        except Exception:
+            #            # Ignore any exceptions raised in the TaskGroup
+            #            pass
+            #        await something_else     # this line has to be called
+            #                                 # after TaskGroup is finished.
+            self._abort()
+            self._parent_cancel_requested = True
+            self._parent_task.cancel()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tasks.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tasks.py
new file mode 100644
index 0000000000000000000000000000000000000000..fbd5c39a7c56ac40dd4143f7d86119e0480935d7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tasks.py
@@ -0,0 +1,1141 @@
+"""Support for tasks, coroutines and the scheduler."""
+
+__all__ = (
+    'Task', 'create_task',
+    'FIRST_COMPLETED', 'FIRST_EXCEPTION', 'ALL_COMPLETED',
+    'wait', 'wait_for', 'as_completed', 'sleep',
+    'gather', 'shield', 'ensure_future', 'run_coroutine_threadsafe',
+    'current_task', 'all_tasks',
+    'create_eager_task_factory', 'eager_task_factory',
+    '_register_task', '_unregister_task', '_enter_task', '_leave_task',
+)
+
+import concurrent.futures
+import contextvars
+import functools
+import inspect
+import itertools
+import math
+import types
+import weakref
+from types import GenericAlias
+
+from . import base_tasks
+from . import coroutines
+from . import events
+from . import exceptions
+from . import futures
+from . import queues
+from . import timeouts
+
+# Helper to generate new task names
+# This uses itertools.count() instead of a "+= 1" operation because the latter
+# is not thread safe. See bpo-11866 for a longer explanation.
+_task_name_counter = itertools.count(1).__next__
+
+
+def current_task(loop=None):
+    """Return a currently executed task."""
+    if loop is None:
+        loop = events.get_running_loop()
+    return _current_tasks.get(loop)
+
+
+def all_tasks(loop=None):
+    """Return a set of all tasks for the loop."""
+    if loop is None:
+        loop = events.get_running_loop()
+    # capturing the set of eager tasks first, so if an eager task "graduates"
+    # to a regular task in another thread, we don't risk missing it.
+    eager_tasks = list(_eager_tasks)
+
+    return {t for t in itertools.chain(_scheduled_tasks, eager_tasks)
+            if futures._get_loop(t) is loop and not t.done()}
+
+
+class Task(futures._PyFuture):  # Inherit Python Task implementation
+                                # from a Python Future implementation.
+
+    """A coroutine wrapped in a Future."""
+
+    # An important invariant maintained while a Task not done:
+    # _fut_waiter is either None or a Future.  The Future
+    # can be either done() or not done().
+    # The task can be in any of 3 states:
+    #
+    # - 1: _fut_waiter is not None and not _fut_waiter.done():
+    #      __step() is *not* scheduled and the Task is waiting for _fut_waiter.
+    # - 2: (_fut_waiter is None or _fut_waiter.done()) and __step() is scheduled:
+    #       the Task is waiting for __step() to be executed.
+    # - 3:  _fut_waiter is None and __step() is *not* scheduled:
+    #       the Task is currently executing (in __step()).
+    #
+    # * In state 1, one of the callbacks of __fut_waiter must be __wakeup().
+    # * The transition from 1 to 2 happens when _fut_waiter becomes done(),
+    #   as it schedules __wakeup() to be called (which calls __step() so
+    #   we way that __step() is scheduled).
+    # * It transitions from 2 to 3 when __step() is executed, and it clears
+    #   _fut_waiter to None.
+
+    # If False, don't log a message if the task is destroyed while its
+    # status is still pending
+    _log_destroy_pending = True
+
+    def __init__(self, coro, *, loop=None, name=None, context=None,
+                 eager_start=False):
+        super().__init__(loop=loop)
+        if self._source_traceback:
+            del self._source_traceback[-1]
+        if not coroutines.iscoroutine(coro):
+            # raise after Future.__init__(), attrs are required for __del__
+            # prevent logging for pending task in __del__
+            self._log_destroy_pending = False
+            raise TypeError(f"a coroutine was expected, got {coro!r}")
+
+        if name is None:
+            self._name = f'Task-{_task_name_counter()}'
+        else:
+            self._name = str(name)
+
+        self._num_cancels_requested = 0
+        self._must_cancel = False
+        self._fut_waiter = None
+        self._coro = coro
+        if context is None:
+            self._context = contextvars.copy_context()
+        else:
+            self._context = context
+
+        if eager_start and self._loop.is_running():
+            self.__eager_start()
+        else:
+            self._loop.call_soon(self.__step, context=self._context)
+            _py_register_task(self)
+
+    def __del__(self):
+        if self._state == futures._PENDING and self._log_destroy_pending:
+            context = {
+                'task': self,
+                'message': 'Task was destroyed but it is pending!',
+            }
+            if self._source_traceback:
+                context['source_traceback'] = self._source_traceback
+            self._loop.call_exception_handler(context)
+        super().__del__()
+
+    __class_getitem__ = classmethod(GenericAlias)
+
+    def __repr__(self):
+        return base_tasks._task_repr(self)
+
+    def get_coro(self):
+        return self._coro
+
+    def get_context(self):
+        return self._context
+
+    def get_name(self):
+        return self._name
+
+    def set_name(self, value):
+        self._name = str(value)
+
+    def set_result(self, result):
+        raise RuntimeError('Task does not support set_result operation')
+
+    def set_exception(self, exception):
+        raise RuntimeError('Task does not support set_exception operation')
+
+    def get_stack(self, *, limit=None):
+        """Return the list of stack frames for this task's coroutine.
+
+        If the coroutine is not done, this returns the stack where it is
+        suspended.  If the coroutine has completed successfully or was
+        cancelled, this returns an empty list.  If the coroutine was
+        terminated by an exception, this returns the list of traceback
+        frames.
+
+        The frames are always ordered from oldest to newest.
+
+        The optional limit gives the maximum number of frames to
+        return; by default all available frames are returned.  Its
+        meaning differs depending on whether a stack or a traceback is
+        returned: the newest frames of a stack are returned, but the
+        oldest frames of a traceback are returned.  (This matches the
+        behavior of the traceback module.)
+
+        For reasons beyond our control, only one stack frame is
+        returned for a suspended coroutine.
+        """
+        return base_tasks._task_get_stack(self, limit)
+
+    def print_stack(self, *, limit=None, file=None):
+        """Print the stack or traceback for this task's coroutine.
+
+        This produces output similar to that of the traceback module,
+        for the frames retrieved by get_stack().  The limit argument
+        is passed to get_stack().  The file argument is an I/O stream
+        to which the output is written; by default output is written
+        to sys.stderr.
+        """
+        return base_tasks._task_print_stack(self, limit, file)
+
+    def cancel(self, msg=None):
+        """Request that this task cancel itself.
+
+        This arranges for a CancelledError to be thrown into the
+        wrapped coroutine on the next cycle through the event loop.
+        The coroutine then has a chance to clean up or even deny
+        the request using try/except/finally.
+
+        Unlike Future.cancel, this does not guarantee that the
+        task will be cancelled: the exception might be caught and
+        acted upon, delaying cancellation of the task or preventing
+        cancellation completely.  The task may also return a value or
+        raise a different exception.
+
+        Immediately after this method is called, Task.cancelled() will
+        not return True (unless the task was already cancelled).  A
+        task will be marked as cancelled when the wrapped coroutine
+        terminates with a CancelledError exception (even if cancel()
+        was not called).
+
+        This also increases the task's count of cancellation requests.
+        """
+        self._log_traceback = False
+        if self.done():
+            return False
+        self._num_cancels_requested += 1
+        # These two lines are controversial.  See discussion starting at
+        # https://github.com/python/cpython/pull/31394#issuecomment-1053545331
+        # Also remember that this is duplicated in _asynciomodule.c.
+        # if self._num_cancels_requested > 1:
+        #     return False
+        if self._fut_waiter is not None:
+            if self._fut_waiter.cancel(msg=msg):
+                # Leave self._fut_waiter; it may be a Task that
+                # catches and ignores the cancellation so we may have
+                # to cancel it again later.
+                return True
+        # It must be the case that self.__step is already scheduled.
+        self._must_cancel = True
+        self._cancel_message = msg
+        return True
+
+    def cancelling(self):
+        """Return the count of the task's cancellation requests.
+
+        This count is incremented when .cancel() is called
+        and may be decremented using .uncancel().
+        """
+        return self._num_cancels_requested
+
+    def uncancel(self):
+        """Decrement the task's count of cancellation requests.
+
+        This should be called by the party that called `cancel()` on the task
+        beforehand.
+
+        Returns the remaining number of cancellation requests.
+        """
+        if self._num_cancels_requested > 0:
+            self._num_cancels_requested -= 1
+            if self._num_cancels_requested == 0:
+                self._must_cancel = False
+        return self._num_cancels_requested
+
+    def __eager_start(self):
+        prev_task = _py_swap_current_task(self._loop, self)
+        try:
+            _py_register_eager_task(self)
+            try:
+                self._context.run(self.__step_run_and_handle_result, None)
+            finally:
+                _py_unregister_eager_task(self)
+        finally:
+            try:
+                curtask = _py_swap_current_task(self._loop, prev_task)
+                assert curtask is self
+            finally:
+                if self.done():
+                    self._coro = None
+                    self = None  # Needed to break cycles when an exception occurs.
+                else:
+                    _py_register_task(self)
+
+    def __step(self, exc=None):
+        if self.done():
+            raise exceptions.InvalidStateError(
+                f'__step(): already done: {self!r}, {exc!r}')
+        if self._must_cancel:
+            if not isinstance(exc, exceptions.CancelledError):
+                exc = self._make_cancelled_error()
+            self._must_cancel = False
+        self._fut_waiter = None
+
+        _py_enter_task(self._loop, self)
+        try:
+            self.__step_run_and_handle_result(exc)
+        finally:
+            _py_leave_task(self._loop, self)
+            self = None  # Needed to break cycles when an exception occurs.
+
+    def __step_run_and_handle_result(self, exc):
+        coro = self._coro
+        try:
+            if exc is None:
+                # We use the `send` method directly, because coroutines
+                # don't have `__iter__` and `__next__` methods.
+                result = coro.send(None)
+            else:
+                result = coro.throw(exc)
+        except StopIteration as exc:
+            if self._must_cancel:
+                # Task is cancelled right before coro stops.
+                self._must_cancel = False
+                super().cancel(msg=self._cancel_message)
+            else:
+                super().set_result(exc.value)
+        except exceptions.CancelledError as exc:
+            # Save the original exception so we can chain it later.
+            self._cancelled_exc = exc
+            super().cancel()  # I.e., Future.cancel(self).
+        except (KeyboardInterrupt, SystemExit) as exc:
+            super().set_exception(exc)
+            raise
+        except BaseException as exc:
+            super().set_exception(exc)
+        else:
+            blocking = getattr(result, '_asyncio_future_blocking', None)
+            if blocking is not None:
+                # Yielded Future must come from Future.__iter__().
+                if futures._get_loop(result) is not self._loop:
+                    new_exc = RuntimeError(
+                        f'Task {self!r} got Future '
+                        f'{result!r} attached to a different loop')
+                    self._loop.call_soon(
+                        self.__step, new_exc, context=self._context)
+                elif blocking:
+                    if result is self:
+                        new_exc = RuntimeError(
+                            f'Task cannot await on itself: {self!r}')
+                        self._loop.call_soon(
+                            self.__step, new_exc, context=self._context)
+                    else:
+                        futures.future_add_to_awaited_by(result, self)
+                        result._asyncio_future_blocking = False
+                        result.add_done_callback(
+                            self.__wakeup, context=self._context)
+                        self._fut_waiter = result
+                        if self._must_cancel:
+                            if self._fut_waiter.cancel(
+                                    msg=self._cancel_message):
+                                self._must_cancel = False
+                else:
+                    new_exc = RuntimeError(
+                        f'yield was used instead of yield from '
+                        f'in task {self!r} with {result!r}')
+                    self._loop.call_soon(
+                        self.__step, new_exc, context=self._context)
+
+            elif result is None:
+                # Bare yield relinquishes control for one event loop iteration.
+                self._loop.call_soon(self.__step, context=self._context)
+            elif inspect.isgenerator(result):
+                # Yielding a generator is just wrong.
+                new_exc = RuntimeError(
+                    f'yield was used instead of yield from for '
+                    f'generator in task {self!r} with {result!r}')
+                self._loop.call_soon(
+                    self.__step, new_exc, context=self._context)
+            else:
+                # Yielding something else is an error.
+                new_exc = RuntimeError(f'Task got bad yield: {result!r}')
+                self._loop.call_soon(
+                    self.__step, new_exc, context=self._context)
+        finally:
+            self = None  # Needed to break cycles when an exception occurs.
+
+    def __wakeup(self, future):
+        futures.future_discard_from_awaited_by(future, self)
+        try:
+            future.result()
+        except BaseException as exc:
+            # This may also be a cancellation.
+            self.__step(exc)
+        else:
+            # Don't pass the value of `future.result()` explicitly,
+            # as `Future.__iter__` and `Future.__await__` don't need it.
+            # If we call `__step(value, None)` instead of `__step()`,
+            # Python eval loop would use `.send(value)` method call,
+            # instead of `__next__()`, which is slower for futures
+            # that return non-generator iterators from their `__iter__`.
+            self.__step()
+        self = None  # Needed to break cycles when an exception occurs.
+
+
+_PyTask = Task
+
+
+try:
+    import _asyncio
+except ImportError:
+    pass
+else:
+    # _CTask is needed for tests.
+    Task = _CTask = _asyncio.Task
+
+
+def create_task(coro, **kwargs):
+    """Schedule the execution of a coroutine object in a spawn task.
+
+    Return a Task object.
+    """
+    loop = events.get_running_loop()
+    return loop.create_task(coro, **kwargs)
+
+
+# wait() and as_completed() similar to those in PEP 3148.
+
+FIRST_COMPLETED = concurrent.futures.FIRST_COMPLETED
+FIRST_EXCEPTION = concurrent.futures.FIRST_EXCEPTION
+ALL_COMPLETED = concurrent.futures.ALL_COMPLETED
+
+
+async def wait(fs, *, timeout=None, return_when=ALL_COMPLETED):
+    """Wait for the Futures or Tasks given by fs to complete.
+
+    The fs iterable must not be empty.
+
+    Returns two sets of Future: (done, pending).
+
+    Usage:
+
+        done, pending = await asyncio.wait(fs)
+
+    Note: This does not raise TimeoutError! Futures that aren't done
+    when the timeout occurs are returned in the second set.
+    """
+    if futures.isfuture(fs) or coroutines.iscoroutine(fs):
+        raise TypeError(f"expect a list of futures, not {type(fs).__name__}")
+    if not fs:
+        raise ValueError('Set of Tasks/Futures is empty.')
+    if return_when not in (FIRST_COMPLETED, FIRST_EXCEPTION, ALL_COMPLETED):
+        raise ValueError(f'Invalid return_when value: {return_when}')
+
+    fs = set(fs)
+
+    if any(coroutines.iscoroutine(f) for f in fs):
+        raise TypeError("Passing coroutines is forbidden, use tasks explicitly.")
+
+    loop = events.get_running_loop()
+    return await _wait(fs, timeout, return_when, loop)
+
+
+def _release_waiter(waiter, *args):
+    if not waiter.done():
+        waiter.set_result(None)
+
+
+async def wait_for(fut, timeout):
+    """Wait for the single Future or coroutine to complete, with timeout.
+
+    Coroutine will be wrapped in Task.
+
+    Returns result of the Future or coroutine.  When a timeout occurs,
+    it cancels the task and raises TimeoutError.  To avoid the task
+    cancellation, wrap it in shield().
+
+    If the wait is cancelled, the task is also cancelled.
+
+    If the task suppresses the cancellation and returns a value instead,
+    that value is returned.
+
+    This function is a coroutine.
+    """
+    # The special case for timeout <= 0 is for the following case:
+    #
+    # async def test_waitfor():
+    #     func_started = False
+    #
+    #     async def func():
+    #         nonlocal func_started
+    #         func_started = True
+    #
+    #     try:
+    #         await asyncio.wait_for(func(), 0)
+    #     except asyncio.TimeoutError:
+    #         assert not func_started
+    #     else:
+    #         assert False
+    #
+    # asyncio.run(test_waitfor())
+
+
+    if timeout is not None and timeout <= 0:
+        fut = ensure_future(fut)
+
+        if fut.done():
+            return fut.result()
+
+        await _cancel_and_wait(fut)
+        try:
+            return fut.result()
+        except exceptions.CancelledError as exc:
+            raise TimeoutError from exc
+
+    async with timeouts.timeout(timeout):
+        return await fut
+
+async def _wait(fs, timeout, return_when, loop):
+    """Internal helper for wait().
+
+    The fs argument must be a collection of Futures.
+    """
+    assert fs, 'Set of Futures is empty.'
+    waiter = loop.create_future()
+    timeout_handle = None
+    if timeout is not None:
+        timeout_handle = loop.call_later(timeout, _release_waiter, waiter)
+    counter = len(fs)
+    cur_task = current_task()
+
+    def _on_completion(f):
+        nonlocal counter
+        counter -= 1
+        if (counter <= 0 or
+            return_when == FIRST_COMPLETED or
+            return_when == FIRST_EXCEPTION and (not f.cancelled() and
+                                                f.exception() is not None)):
+            if timeout_handle is not None:
+                timeout_handle.cancel()
+            if not waiter.done():
+                waiter.set_result(None)
+        futures.future_discard_from_awaited_by(f, cur_task)
+
+    for f in fs:
+        f.add_done_callback(_on_completion)
+        futures.future_add_to_awaited_by(f, cur_task)
+
+    try:
+        await waiter
+    finally:
+        if timeout_handle is not None:
+            timeout_handle.cancel()
+        for f in fs:
+            f.remove_done_callback(_on_completion)
+
+    done, pending = set(), set()
+    for f in fs:
+        if f.done():
+            done.add(f)
+        else:
+            pending.add(f)
+    return done, pending
+
+
+async def _cancel_and_wait(fut):
+    """Cancel the *fut* future or task and wait until it completes."""
+
+    loop = events.get_running_loop()
+    waiter = loop.create_future()
+    cb = functools.partial(_release_waiter, waiter)
+    fut.add_done_callback(cb)
+
+    try:
+        fut.cancel()
+        # We cannot wait on *fut* directly to make
+        # sure _cancel_and_wait itself is reliably cancellable.
+        await waiter
+    finally:
+        fut.remove_done_callback(cb)
+
+
+class _AsCompletedIterator:
+    """Iterator of awaitables representing tasks of asyncio.as_completed.
+
+    As an asynchronous iterator, iteration yields futures as they finish. As a
+    plain iterator, new coroutines are yielded that will return or raise the
+    result of the next underlying future to complete.
+    """
+    def __init__(self, aws, timeout):
+        self._done = queues.Queue()
+        self._timeout_handle = None
+
+        loop = events.get_event_loop()
+        todo = {ensure_future(aw, loop=loop) for aw in set(aws)}
+        for f in todo:
+            f.add_done_callback(self._handle_completion)
+        if todo and timeout is not None:
+            self._timeout_handle = (
+                loop.call_later(timeout, self._handle_timeout)
+            )
+        self._todo = todo
+        self._todo_left = len(todo)
+
+    def __aiter__(self):
+        return self
+
+    def __iter__(self):
+        return self
+
+    async def __anext__(self):
+        if not self._todo_left:
+            raise StopAsyncIteration
+        assert self._todo_left > 0
+        self._todo_left -= 1
+        return await self._wait_for_one()
+
+    def __next__(self):
+        if not self._todo_left:
+            raise StopIteration
+        assert self._todo_left > 0
+        self._todo_left -= 1
+        return self._wait_for_one(resolve=True)
+
+    def _handle_timeout(self):
+        for f in self._todo:
+            f.remove_done_callback(self._handle_completion)
+            self._done.put_nowait(None)  # Sentinel for _wait_for_one().
+        self._todo.clear()  # Can't do todo.remove(f) in the loop.
+
+    def _handle_completion(self, f):
+        if not self._todo:
+            return  # _handle_timeout() was here first.
+        self._todo.remove(f)
+        self._done.put_nowait(f)
+        if not self._todo and self._timeout_handle is not None:
+            self._timeout_handle.cancel()
+
+    async def _wait_for_one(self, resolve=False):
+        # Wait for the next future to be done and return it unless resolve is
+        # set, in which case return either the result of the future or raise
+        # an exception.
+        f = await self._done.get()
+        if f is None:
+            # Dummy value from _handle_timeout().
+            raise exceptions.TimeoutError
+        return f.result() if resolve else f
+
+
+def as_completed(fs, *, timeout=None):
+    """Create an iterator of awaitables or their results in completion order.
+
+    Run the supplied awaitables concurrently. The returned object can be
+    iterated to obtain the results of the awaitables as they finish.
+
+    The object returned can be iterated as an asynchronous iterator or a plain
+    iterator. When asynchronous iteration is used, the originally-supplied
+    awaitables are yielded if they are tasks or futures. This makes it easy to
+    correlate previously-scheduled tasks with their results:
+
+        ipv4_connect = create_task(open_connection("127.0.0.1", 80))
+        ipv6_connect = create_task(open_connection("::1", 80))
+        tasks = [ipv4_connect, ipv6_connect]
+
+        async for earliest_connect in as_completed(tasks):
+            # earliest_connect is done. The result can be obtained by
+            # awaiting it or calling earliest_connect.result()
+            reader, writer = await earliest_connect
+
+            if earliest_connect is ipv6_connect:
+                print("IPv6 connection established.")
+            else:
+                print("IPv4 connection established.")
+
+    During asynchronous iteration, implicitly-created tasks will be yielded for
+    supplied awaitables that aren't tasks or futures.
+
+    When used as a plain iterator, each iteration yields a new coroutine that
+    returns the result or raises the exception of the next completed awaitable.
+    This pattern is compatible with Python versions older than 3.13:
+
+        ipv4_connect = create_task(open_connection("127.0.0.1", 80))
+        ipv6_connect = create_task(open_connection("::1", 80))
+        tasks = [ipv4_connect, ipv6_connect]
+
+        for next_connect in as_completed(tasks):
+            # next_connect is not one of the original task objects. It must be
+            # awaited to obtain the result value or raise the exception of the
+            # awaitable that finishes next.
+            reader, writer = await next_connect
+
+    A TimeoutError is raised if the timeout occurs before all awaitables are
+    done. This is raised by the async for loop during asynchronous iteration or
+    by the coroutines yielded during plain iteration.
+    """
+    if inspect.isawaitable(fs):
+        raise TypeError(
+            f"expects an iterable of awaitables, not {type(fs).__name__}"
+        )
+
+    return _AsCompletedIterator(fs, timeout)
+
+
+@types.coroutine
+def __sleep0():
+    """Skip one event loop run cycle.
+
+    This is a private helper for 'asyncio.sleep()', used
+    when the 'delay' is set to 0.  It uses a bare 'yield'
+    expression (which Task.__step knows how to handle)
+    instead of creating a Future object.
+    """
+    yield
+
+
+async def sleep(delay, result=None):
+    """Coroutine that completes after a given time (in seconds)."""
+    if delay <= 0:
+        await __sleep0()
+        return result
+
+    if math.isnan(delay):
+        raise ValueError("Invalid delay: NaN (not a number)")
+
+    loop = events.get_running_loop()
+    future = loop.create_future()
+    h = loop.call_later(delay,
+                        futures._set_result_unless_cancelled,
+                        future, result)
+    try:
+        return await future
+    finally:
+        h.cancel()
+
+
+def ensure_future(coro_or_future, *, loop=None):
+    """Wrap a coroutine or an awaitable in a future.
+
+    If the argument is a Future, it is returned directly.
+    """
+    if futures.isfuture(coro_or_future):
+        if loop is not None and loop is not futures._get_loop(coro_or_future):
+            raise ValueError('The future belongs to a different loop than '
+                            'the one specified as the loop argument')
+        return coro_or_future
+    should_close = True
+    if not coroutines.iscoroutine(coro_or_future):
+        if inspect.isawaitable(coro_or_future):
+            async def _wrap_awaitable(awaitable):
+                return await awaitable
+
+            coro_or_future = _wrap_awaitable(coro_or_future)
+            should_close = False
+        else:
+            raise TypeError('An asyncio.Future, a coroutine or an awaitable '
+                            'is required')
+
+    if loop is None:
+        loop = events.get_event_loop()
+    try:
+        return loop.create_task(coro_or_future)
+    except RuntimeError:
+        if should_close:
+            coro_or_future.close()
+        raise
+
+
+class _GatheringFuture(futures.Future):
+    """Helper for gather().
+
+    This overrides cancel() to cancel all the children and act more
+    like Task.cancel(), which doesn't immediately mark itself as
+    cancelled.
+    """
+
+    def __init__(self, children, *, loop):
+        assert loop is not None
+        super().__init__(loop=loop)
+        self._children = children
+        self._cancel_requested = False
+
+    def cancel(self, msg=None):
+        if self.done():
+            return False
+        ret = False
+        for child in self._children:
+            if child.cancel(msg=msg):
+                ret = True
+        if ret:
+            # If any child tasks were actually cancelled, we should
+            # propagate the cancellation request regardless of
+            # *return_exceptions* argument.  See issue 32684.
+            self._cancel_requested = True
+        return ret
+
+
+def gather(*coros_or_futures, return_exceptions=False):
+    """Return a future aggregating results from the given coroutines/futures.
+
+    Coroutines will be wrapped in a future and scheduled in the event
+    loop. They will not necessarily be scheduled in the same order as
+    passed in.
+
+    All futures must share the same event loop.  If all the tasks are
+    done successfully, the returned future's result is the list of
+    results (in the order of the original sequence, not necessarily
+    the order of results arrival).  If *return_exceptions* is True,
+    exceptions in the tasks are treated the same as successful
+    results, and gathered in the result list; otherwise, the first
+    raised exception will be immediately propagated to the returned
+    future.
+
+    Cancellation: if the outer Future is cancelled, all children (that
+    have not completed yet) are also cancelled.  If any child is
+    cancelled, this is treated as if it raised CancelledError --
+    the outer Future is *not* cancelled in this case.  (This is to
+    prevent the cancellation of one child to cause other children to
+    be cancelled.)
+
+    If *return_exceptions* is False, cancelling gather() after it
+    has been marked done won't cancel any submitted awaitables.
+    For instance, gather can be marked done after propagating an
+    exception to the caller, therefore, calling ``gather.cancel()``
+    after catching an exception (raised by one of the awaitables) from
+    gather won't cancel any other awaitables.
+    """
+    if not coros_or_futures:
+        loop = events.get_event_loop()
+        outer = loop.create_future()
+        outer.set_result([])
+        return outer
+
+    loop = events._get_running_loop()
+    if loop is not None:
+        cur_task = current_task(loop)
+    else:
+        cur_task = None
+
+    def _done_callback(fut, cur_task=cur_task):
+        nonlocal nfinished
+        nfinished += 1
+
+        if cur_task is not None:
+            futures.future_discard_from_awaited_by(fut, cur_task)
+
+        if outer is None or outer.done():
+            if not fut.cancelled():
+                # Mark exception retrieved.
+                fut.exception()
+            return
+
+        if not return_exceptions:
+            if fut.cancelled():
+                # Check if 'fut' is cancelled first, as
+                # 'fut.exception()' will *raise* a CancelledError
+                # instead of returning it.
+                exc = fut._make_cancelled_error()
+                outer.set_exception(exc)
+                return
+            else:
+                exc = fut.exception()
+                if exc is not None:
+                    outer.set_exception(exc)
+                    return
+
+        if nfinished == nfuts:
+            # All futures are done; create a list of results
+            # and set it to the 'outer' future.
+            results = []
+
+            for fut in children:
+                if fut.cancelled():
+                    # Check if 'fut' is cancelled first, as 'fut.exception()'
+                    # will *raise* a CancelledError instead of returning it.
+                    # Also, since we're adding the exception return value
+                    # to 'results' instead of raising it, don't bother
+                    # setting __context__.  This also lets us preserve
+                    # calling '_make_cancelled_error()' at most once.
+                    res = exceptions.CancelledError(
+                        '' if fut._cancel_message is None else
+                        fut._cancel_message)
+                else:
+                    res = fut.exception()
+                    if res is None:
+                        res = fut.result()
+                results.append(res)
+
+            if outer._cancel_requested:
+                # If gather is being cancelled we must propagate the
+                # cancellation regardless of *return_exceptions* argument.
+                # See issue 32684.
+                exc = fut._make_cancelled_error()
+                outer.set_exception(exc)
+            else:
+                outer.set_result(results)
+
+    arg_to_fut = {}
+    children = []
+    nfuts = 0
+    nfinished = 0
+    done_futs = []
+    outer = None  # bpo-46672
+    for arg in coros_or_futures:
+        if arg not in arg_to_fut:
+            fut = ensure_future(arg, loop=loop)
+            if loop is None:
+                loop = futures._get_loop(fut)
+            if fut is not arg:
+                # 'arg' was not a Future, therefore, 'fut' is a new
+                # Future created specifically for 'arg'.  Since the caller
+                # can't control it, disable the "destroy pending task"
+                # warning.
+                fut._log_destroy_pending = False
+            nfuts += 1
+            arg_to_fut[arg] = fut
+            if fut.done():
+                done_futs.append(fut)
+            else:
+                if cur_task is not None:
+                    futures.future_add_to_awaited_by(fut, cur_task)
+                fut.add_done_callback(_done_callback)
+
+        else:
+            # There's a duplicate Future object in coros_or_futures.
+            fut = arg_to_fut[arg]
+
+        children.append(fut)
+
+    outer = _GatheringFuture(children, loop=loop)
+    # Run done callbacks after GatheringFuture created so any post-processing
+    # can be performed at this point
+    # optimization: in the special case that *all* futures finished eagerly,
+    # this will effectively complete the gather eagerly, with the last
+    # callback setting the result (or exception) on outer before returning it
+    for fut in done_futs:
+        _done_callback(fut)
+    return outer
+
+
+def _log_on_exception(fut):
+    if fut.cancelled():
+        return
+
+    exc = fut.exception()
+    if exc is None:
+        return
+
+    context = {
+        'message':
+        f'{exc.__class__.__name__} exception in shielded future',
+        'exception': exc,
+        'future': fut,
+    }
+    if fut._source_traceback:
+        context['source_traceback'] = fut._source_traceback
+    fut._loop.call_exception_handler(context)
+
+
+def shield(arg):
+    """Wait for a future, shielding it from cancellation.
+
+    The statement
+
+        task = asyncio.create_task(something())
+        res = await shield(task)
+
+    is exactly equivalent to the statement
+
+        res = await something()
+
+    *except* that if the coroutine containing it is cancelled, the
+    task running in something() is not cancelled.  From the POV of
+    something(), the cancellation did not happen.  But its caller is
+    still cancelled, so the yield-from expression still raises
+    CancelledError.  Note: If something() is cancelled by other means
+    this will still cancel shield().
+
+    If you want to completely ignore cancellation (not recommended)
+    you can combine shield() with a try/except clause, as follows:
+
+        task = asyncio.create_task(something())
+        try:
+            res = await shield(task)
+        except CancelledError:
+            res = None
+
+    Save a reference to tasks passed to this function, to avoid
+    a task disappearing mid-execution. The event loop only keeps
+    weak references to tasks. A task that isn't referenced elsewhere
+    may get garbage collected at any time, even before it's done.
+    """
+    inner = ensure_future(arg)
+    if inner.done():
+        # Shortcut.
+        return inner
+    loop = futures._get_loop(inner)
+    outer = loop.create_future()
+
+    if loop is not None and (cur_task := current_task(loop)) is not None:
+        futures.future_add_to_awaited_by(inner, cur_task)
+    else:
+        cur_task = None
+
+    def _clear_awaited_by_callback(inner):
+        futures.future_discard_from_awaited_by(inner, cur_task)
+
+    def _inner_done_callback(inner):
+        if outer.cancelled():
+            return
+
+        if inner.cancelled():
+            outer.cancel()
+        else:
+            exc = inner.exception()
+            if exc is not None:
+                outer.set_exception(exc)
+            else:
+                outer.set_result(inner.result())
+
+    def _outer_done_callback(outer):
+        if not inner.done():
+            inner.remove_done_callback(_inner_done_callback)
+            # Keep only one callback to log on cancel
+            inner.remove_done_callback(_log_on_exception)
+            inner.add_done_callback(_log_on_exception)
+
+    if cur_task is not None:
+        inner.add_done_callback(_clear_awaited_by_callback)
+
+
+    inner.add_done_callback(_inner_done_callback)
+    outer.add_done_callback(_outer_done_callback)
+    return outer
+
+
+def run_coroutine_threadsafe(coro, loop):
+    """Submit a coroutine object to a given event loop.
+
+    Return a concurrent.futures.Future to access the result.
+    """
+    if not coroutines.iscoroutine(coro):
+        raise TypeError('A coroutine object is required')
+    future = concurrent.futures.Future()
+
+    def callback():
+        try:
+            futures._chain_future(ensure_future(coro, loop=loop), future)
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            if future.set_running_or_notify_cancel():
+                future.set_exception(exc)
+            raise
+
+    loop.call_soon_threadsafe(callback)
+    return future
+
+
+def create_eager_task_factory(custom_task_constructor):
+    """Create a function suitable for use as a task factory on an event-loop.
+
+        Example usage:
+
+            loop.set_task_factory(
+                asyncio.create_eager_task_factory(my_task_constructor))
+
+        Now, tasks created will be started immediately (rather than being first
+        scheduled to an event loop). The constructor argument can be any callable
+        that returns a Task-compatible object and has a signature compatible
+        with `Task.__init__`; it must have the `eager_start` keyword argument.
+
+        Most applications will use `Task` for `custom_task_constructor` and in
+        this case there's no need to call `create_eager_task_factory()`
+        directly. Instead the  global `eager_task_factory` instance can be
+        used. E.g. `loop.set_task_factory(asyncio.eager_task_factory)`.
+        """
+
+    def factory(loop, coro, *, eager_start=True, **kwargs):
+        return custom_task_constructor(
+            coro, loop=loop, eager_start=eager_start, **kwargs)
+
+    return factory
+
+
+eager_task_factory = create_eager_task_factory(Task)
+
+
+# Collectively these two sets hold references to the complete set of active
+# tasks. Eagerly executed tasks use a faster regular set as an optimization
+# but may graduate to a WeakSet if the task blocks on IO.
+_scheduled_tasks = weakref.WeakSet()
+_eager_tasks = set()
+
+# Dictionary containing tasks that are currently active in
+# all running event loops.  {EventLoop: Task}
+_current_tasks = {}
+
+
+def _register_task(task):
+    """Register an asyncio Task scheduled to run on an event loop."""
+    _scheduled_tasks.add(task)
+
+
+def _register_eager_task(task):
+    """Register an asyncio Task about to be eagerly executed."""
+    _eager_tasks.add(task)
+
+
+def _enter_task(loop, task):
+    current_task = _current_tasks.get(loop)
+    if current_task is not None:
+        raise RuntimeError(f"Cannot enter into task {task!r} while another "
+                           f"task {current_task!r} is being executed.")
+    _current_tasks[loop] = task
+
+
+def _leave_task(loop, task):
+    current_task = _current_tasks.get(loop)
+    if current_task is not task:
+        raise RuntimeError(f"Leaving task {task!r} does not match "
+                           f"the current task {current_task!r}.")
+    del _current_tasks[loop]
+
+
+def _swap_current_task(loop, task):
+    prev_task = _current_tasks.get(loop)
+    if task is None:
+        del _current_tasks[loop]
+    else:
+        _current_tasks[loop] = task
+    return prev_task
+
+
+def _unregister_task(task):
+    """Unregister a completed, scheduled Task."""
+    _scheduled_tasks.discard(task)
+
+
+def _unregister_eager_task(task):
+    """Unregister a task which finished its first eager step."""
+    _eager_tasks.discard(task)
+
+
+_py_current_task = current_task
+_py_register_task = _register_task
+_py_register_eager_task = _register_eager_task
+_py_unregister_task = _unregister_task
+_py_unregister_eager_task = _unregister_eager_task
+_py_enter_task = _enter_task
+_py_leave_task = _leave_task
+_py_swap_current_task = _swap_current_task
+_py_all_tasks = all_tasks
+
+try:
+    from _asyncio import (_register_task, _register_eager_task,
+                          _unregister_task, _unregister_eager_task,
+                          _enter_task, _leave_task, _swap_current_task,
+                          current_task, all_tasks)
+except ImportError:
+    pass
+else:
+    _c_current_task = current_task
+    _c_register_task = _register_task
+    _c_register_eager_task = _register_eager_task
+    _c_unregister_task = _unregister_task
+    _c_unregister_eager_task = _unregister_eager_task
+    _c_enter_task = _enter_task
+    _c_leave_task = _leave_task
+    _c_swap_current_task = _swap_current_task
+    _c_all_tasks = all_tasks
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/threads.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/threads.py
new file mode 100644
index 0000000000000000000000000000000000000000..db048a8231de166e2af4f2e06092d98def9b1703
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/threads.py
@@ -0,0 +1,25 @@
+"""High-level support for working with threads in asyncio"""
+
+import functools
+import contextvars
+
+from . import events
+
+
+__all__ = "to_thread",
+
+
+async def to_thread(func, /, *args, **kwargs):
+    """Asynchronously run function *func* in a separate thread.
+
+    Any *args and **kwargs supplied for this function are directly passed
+    to *func*. Also, the current :class:`contextvars.Context` is propagated,
+    allowing context variables from the main thread to be accessed in the
+    separate thread.
+
+    Return a coroutine that can be awaited to get the eventual result of *func*.
+    """
+    loop = events.get_running_loop()
+    ctx = contextvars.copy_context()
+    func_call = functools.partial(ctx.run, func, *args, **kwargs)
+    return await loop.run_in_executor(None, func_call)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/timeouts.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/timeouts.py
new file mode 100644
index 0000000000000000000000000000000000000000..09342dc7c1310b09dc361d0f671926afcb9e2546
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/timeouts.py
@@ -0,0 +1,182 @@
+import enum
+
+from types import TracebackType
+
+from . import events
+from . import exceptions
+from . import tasks
+
+
+__all__ = (
+    "Timeout",
+    "timeout",
+    "timeout_at",
+)
+
+
+class _State(enum.Enum):
+    CREATED = "created"
+    ENTERED = "active"
+    EXPIRING = "expiring"
+    EXPIRED = "expired"
+    EXITED = "finished"
+
+
+class Timeout:
+    """Asynchronous context manager for cancelling overdue coroutines.
+
+    Use `timeout()` or `timeout_at()` rather than instantiating this class directly.
+    """
+
+    def __init__(self, when: float | None) -> None:
+        """Schedule a timeout that will trigger at a given loop time.
+
+        - If `when` is `None`, the timeout will never trigger.
+        - If `when < loop.time()`, the timeout will trigger on the next
+          iteration of the event loop.
+        """
+        self._state = _State.CREATED
+
+        self._timeout_handler: events.TimerHandle | None = None
+        self._task: tasks.Task | None = None
+        self._when = when
+
+    def when(self) -> float | None:
+        """Return the current deadline."""
+        return self._when
+
+    def reschedule(self, when: float | None) -> None:
+        """Reschedule the timeout."""
+        if self._state is not _State.ENTERED:
+            if self._state is _State.CREATED:
+                raise RuntimeError("Timeout has not been entered")
+            raise RuntimeError(
+                f"Cannot change state of {self._state.value} Timeout",
+            )
+
+        self._when = when
+
+        if self._timeout_handler is not None:
+            self._timeout_handler.cancel()
+
+        if when is None:
+            self._timeout_handler = None
+        else:
+            loop = events.get_running_loop()
+            if when <= loop.time():
+                self._timeout_handler = loop.call_soon(self._on_timeout)
+            else:
+                self._timeout_handler = loop.call_at(when, self._on_timeout)
+
+    def expired(self) -> bool:
+        """Is timeout expired during execution?"""
+        return self._state in (_State.EXPIRING, _State.EXPIRED)
+
+    def __repr__(self) -> str:
+        info = ['']
+        if self._state is _State.ENTERED:
+            when = round(self._when, 3) if self._when is not None else None
+            info.append(f"when={when}")
+        info_str = ' '.join(info)
+        return f"<Timeout [{self._state.value}]{info_str}>"
+
+    async def __aenter__(self) -> "Timeout":
+        if self._state is not _State.CREATED:
+            raise RuntimeError("Timeout has already been entered")
+        task = tasks.current_task()
+        if task is None:
+            raise RuntimeError("Timeout should be used inside a task")
+        self._state = _State.ENTERED
+        self._task = task
+        self._cancelling = self._task.cancelling()
+        self.reschedule(self._when)
+        return self
+
+    async def __aexit__(
+        self,
+        exc_type: type[BaseException] | None,
+        exc_val: BaseException | None,
+        exc_tb: TracebackType | None,
+    ) -> bool | None:
+        assert self._state in (_State.ENTERED, _State.EXPIRING)
+
+        if self._timeout_handler is not None:
+            self._timeout_handler.cancel()
+            self._timeout_handler = None
+
+        if self._state is _State.EXPIRING:
+            self._state = _State.EXPIRED
+
+            if self._task.uncancel() <= self._cancelling and exc_type is not None:
+                # Since there are no new cancel requests, we're
+                # handling this.
+                if issubclass(exc_type, exceptions.CancelledError):
+                    raise TimeoutError from exc_val
+                elif exc_val is not None:
+                    self._insert_timeout_error(exc_val)
+                    if isinstance(exc_val, ExceptionGroup):
+                        for exc in exc_val.exceptions:
+                            self._insert_timeout_error(exc)
+        elif self._state is _State.ENTERED:
+            self._state = _State.EXITED
+
+        return None
+
+    def _on_timeout(self) -> None:
+        assert self._state is _State.ENTERED
+        self._task.cancel()
+        self._state = _State.EXPIRING
+        # drop the reference early
+        self._timeout_handler = None
+
+    @staticmethod
+    def _insert_timeout_error(exc_val: BaseException) -> None:
+        while exc_val.__context__ is not None:
+            if isinstance(exc_val.__context__, exceptions.CancelledError):
+                te = TimeoutError()
+                te.__context__ = te.__cause__ = exc_val.__context__
+                exc_val.__context__ = te
+                break
+            exc_val = exc_val.__context__
+
+
+def timeout(delay: float | None) -> Timeout:
+    """Timeout async context manager.
+
+    Useful in cases when you want to apply timeout logic around block
+    of code or in cases when asyncio.wait_for is not suitable. For example:
+
+    >>> async with asyncio.timeout(10):  # 10 seconds timeout
+    ...     await long_running_task()
+
+
+    delay - value in seconds or None to disable timeout logic
+
+    long_running_task() is interrupted by raising asyncio.CancelledError,
+    the top-most affected timeout() context manager converts CancelledError
+    into TimeoutError.
+    """
+    loop = events.get_running_loop()
+    return Timeout(loop.time() + delay if delay is not None else None)
+
+
+def timeout_at(when: float | None) -> Timeout:
+    """Schedule the timeout at absolute time.
+
+    Like timeout() but argument gives absolute time in the same clock system
+    as loop.time().
+
+    Please note: it is not POSIX time but a time with
+    undefined starting base, e.g. the time of the system power on.
+
+    >>> async with asyncio.timeout_at(loop.time() + 10):
+    ...     await long_running_task()
+
+
+    when - a deadline when timeout occurs or None to disable timeout logic
+
+    long_running_task() is interrupted by raising asyncio.CancelledError,
+    the top-most affected timeout() context manager converts CancelledError
+    into TimeoutError.
+    """
+    return Timeout(when)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tools.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tools.py
new file mode 100644
index 0000000000000000000000000000000000000000..f39e11fdd513b4d61c3b9cec0f8728310c414766
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/tools.py
@@ -0,0 +1,276 @@
+"""Tools to analyze tasks running in asyncio programs."""
+
+from collections import defaultdict, namedtuple
+from itertools import count
+from enum import Enum
+import sys
+from _remote_debugging import RemoteUnwinder, FrameInfo
+
+class NodeType(Enum):
+    COROUTINE = 1
+    TASK = 2
+
+
+class CycleFoundException(Exception):
+    """Raised when there is a cycle when drawing the call tree."""
+    def __init__(
+            self,
+            cycles: list[list[int]],
+            id2name: dict[int, str],
+        ) -> None:
+        super().__init__(cycles, id2name)
+        self.cycles = cycles
+        self.id2name = id2name
+
+
+
+# ─── indexing helpers ───────────────────────────────────────────
+def _format_stack_entry(elem: str|FrameInfo) -> str:
+    if not isinstance(elem, str):
+        if elem.lineno == 0 and elem.filename == "":
+            return f"{elem.funcname}"
+        else:
+            return f"{elem.funcname} {elem.filename}:{elem.lineno}"
+    return elem
+
+
+def _index(result):
+    id2name, awaits, task_stacks = {}, [], {}
+    for awaited_info in result:
+        for task_info in awaited_info.awaited_by:
+            task_id = task_info.task_id
+            task_name = task_info.task_name
+            id2name[task_id] = task_name
+
+            # Store the internal coroutine stack for this task
+            if task_info.coroutine_stack:
+                for coro_info in task_info.coroutine_stack:
+                    call_stack = coro_info.call_stack
+                    internal_stack = [_format_stack_entry(frame) for frame in call_stack]
+                    task_stacks[task_id] = internal_stack
+
+            # Add the awaited_by relationships (external dependencies)
+            if task_info.awaited_by:
+                for coro_info in task_info.awaited_by:
+                    call_stack = coro_info.call_stack
+                    parent_task_id = coro_info.task_name
+                    stack = [_format_stack_entry(frame) for frame in call_stack]
+                    awaits.append((parent_task_id, stack, task_id))
+    return id2name, awaits, task_stacks
+
+
+def _build_tree(id2name, awaits, task_stacks):
+    id2label = {(NodeType.TASK, tid): name for tid, name in id2name.items()}
+    children = defaultdict(list)
+    cor_nodes = defaultdict(dict)  # Maps parent -> {frame_name: node_key}
+    next_cor_id = count(1)
+
+    def get_or_create_cor_node(parent, frame):
+        """Get existing coroutine node or create new one under parent"""
+        if frame in cor_nodes[parent]:
+            return cor_nodes[parent][frame]
+
+        node_key = (NodeType.COROUTINE, f"c{next(next_cor_id)}")
+        id2label[node_key] = frame
+        children[parent].append(node_key)
+        cor_nodes[parent][frame] = node_key
+        return node_key
+
+    # Build task dependency tree with coroutine frames
+    for parent_id, stack, child_id in awaits:
+        cur = (NodeType.TASK, parent_id)
+        for frame in reversed(stack):
+            cur = get_or_create_cor_node(cur, frame)
+
+        child_key = (NodeType.TASK, child_id)
+        if child_key not in children[cur]:
+            children[cur].append(child_key)
+
+    # Add coroutine stacks for leaf tasks
+    awaiting_tasks = {parent_id for parent_id, _, _ in awaits}
+    for task_id in id2name:
+        if task_id not in awaiting_tasks and task_id in task_stacks:
+            cur = (NodeType.TASK, task_id)
+            for frame in reversed(task_stacks[task_id]):
+                cur = get_or_create_cor_node(cur, frame)
+
+    return id2label, children
+
+
+def _roots(id2label, children):
+    all_children = {c for kids in children.values() for c in kids}
+    return [n for n in id2label if n not in all_children]
+
+# ─── detect cycles in the task-to-task graph ───────────────────────
+def _task_graph(awaits):
+    """Return {parent_task_id: {child_task_id, …}, …}."""
+    g = defaultdict(set)
+    for parent_id, _stack, child_id in awaits:
+        g[parent_id].add(child_id)
+    return g
+
+
+def _find_cycles(graph):
+    """
+    Depth-first search for back-edges.
+
+    Returns a list of cycles (each cycle is a list of task-ids) or an
+    empty list if the graph is acyclic.
+    """
+    WHITE, GREY, BLACK = 0, 1, 2
+    color = defaultdict(lambda: WHITE)
+    path, cycles = [], []
+
+    def dfs(v):
+        color[v] = GREY
+        path.append(v)
+        for w in graph.get(v, ()):
+            if color[w] == WHITE:
+                dfs(w)
+            elif color[w] == GREY:            # back-edge → cycle!
+                i = path.index(w)
+                cycles.append(path[i:] + [w])  # make a copy
+        color[v] = BLACK
+        path.pop()
+
+    for v in list(graph):
+        if color[v] == WHITE:
+            dfs(v)
+    return cycles
+
+
+# ─── PRINT TREE FUNCTION ───────────────────────────────────────
+def get_all_awaited_by(pid):
+    unwinder = RemoteUnwinder(pid)
+    return unwinder.get_all_awaited_by()
+
+
+def build_async_tree(result, task_emoji="(T)", cor_emoji=""):
+    """
+    Build a list of strings for pretty-print an async call tree.
+
+    The call tree is produced by `get_all_async_stacks()`, prefixing tasks
+    with `task_emoji` and coroutine frames with `cor_emoji`.
+    """
+    id2name, awaits, task_stacks = _index(result)
+    g = _task_graph(awaits)
+    cycles = _find_cycles(g)
+    if cycles:
+        raise CycleFoundException(cycles, id2name)
+    labels, children = _build_tree(id2name, awaits, task_stacks)
+
+    def pretty(node):
+        flag = task_emoji if node[0] == NodeType.TASK else cor_emoji
+        return f"{flag} {labels[node]}"
+
+    def render(node, prefix="", last=True, buf=None):
+        if buf is None:
+            buf = []
+        buf.append(f"{prefix}{'└── ' if last else '├── '}{pretty(node)}")
+        new_pref = prefix + ("    " if last else "│   ")
+        kids = children.get(node, [])
+        for i, kid in enumerate(kids):
+            render(kid, new_pref, i == len(kids) - 1, buf)
+        return buf
+
+    return [render(root) for root in _roots(labels, children)]
+
+
+def build_task_table(result):
+    id2name, _, _ = _index(result)
+    table = []
+
+    for awaited_info in result:
+        thread_id = awaited_info.thread_id
+        for task_info in awaited_info.awaited_by:
+            # Get task info
+            task_id = task_info.task_id
+            task_name = task_info.task_name
+
+            # Build coroutine stack string
+            frames = [frame for coro in task_info.coroutine_stack
+                     for frame in coro.call_stack]
+            coro_stack = " -> ".join(_format_stack_entry(x).split(" ")[0]
+                                   for x in frames)
+
+            # Handle tasks with no awaiters
+            if not task_info.awaited_by:
+                table.append([thread_id, hex(task_id), task_name, coro_stack,
+                            "", "", "0x0"])
+                continue
+
+            # Handle tasks with awaiters
+            for coro_info in task_info.awaited_by:
+                parent_id = coro_info.task_name
+                awaiter_frames = [_format_stack_entry(x).split(" ")[0]
+                                for x in coro_info.call_stack]
+                awaiter_chain = " -> ".join(awaiter_frames)
+                awaiter_name = id2name.get(parent_id, "Unknown")
+                parent_id_str = (hex(parent_id) if isinstance(parent_id, int)
+                               else str(parent_id))
+
+                table.append([thread_id, hex(task_id), task_name, coro_stack,
+                            awaiter_chain, awaiter_name, parent_id_str])
+
+    return table
+
+def _print_cycle_exception(exception: CycleFoundException):
+    print("ERROR: await-graph contains cycles - cannot print a tree!", file=sys.stderr)
+    print("", file=sys.stderr)
+    for c in exception.cycles:
+        inames = " → ".join(exception.id2name.get(tid, hex(tid)) for tid in c)
+        print(f"cycle: {inames}", file=sys.stderr)
+
+
+def exit_with_permission_help_text():
+    """
+    Prints a message pointing to platform-specific permission help text and exits the program.
+    This function is called when a PermissionError is encountered while trying
+    to attach to a process.
+    """
+    print(
+        "Error: The specified process cannot be attached to due to insufficient permissions.\n"
+        "See the Python documentation for details on required privileges and troubleshooting:\n"
+        "https://docs.python.org/3.14/howto/remote_debugging.html#permission-requirements\n"
+    )
+    sys.exit(1)
+
+
+def _get_awaited_by_tasks(pid: int) -> list:
+    try:
+        return get_all_awaited_by(pid)
+    except RuntimeError as e:
+        while e.__context__ is not None:
+            e = e.__context__
+        print(f"Error retrieving tasks: {e}")
+        sys.exit(1)
+    except PermissionError as e:
+        exit_with_permission_help_text()
+
+
+def display_awaited_by_tasks_table(pid: int) -> None:
+    """Build and print a table of all pending tasks under `pid`."""
+
+    tasks = _get_awaited_by_tasks(pid)
+    table = build_task_table(tasks)
+    # Print the table in a simple tabular format
+    print(
+        f"{'tid':<10} {'task id':<20} {'task name':<20} {'coroutine stack':<50} {'awaiter chain':<50} {'awaiter name':<15} {'awaiter id':<15}"
+    )
+    print("-" * 180)
+    for row in table:
+        print(f"{row[0]:<10} {row[1]:<20} {row[2]:<20} {row[3]:<50} {row[4]:<50} {row[5]:<15} {row[6]:<15}")
+
+
+def display_awaited_by_tasks_tree(pid: int) -> None:
+    """Build and print a tree of all pending tasks under `pid`."""
+
+    tasks = _get_awaited_by_tasks(pid)
+    try:
+        result = build_async_tree(tasks)
+    except CycleFoundException as e:
+        _print_cycle_exception(e)
+        sys.exit(1)
+
+    for tree in result:
+        print("\n".join(tree))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/transports.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/transports.py
new file mode 100644
index 0000000000000000000000000000000000000000..34c7ad44ffd8ab3e65f45f938f258a387f86cbb4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/transports.py
@@ -0,0 +1,337 @@
+"""Abstract Transport class."""
+
+__all__ = (
+    'BaseTransport', 'ReadTransport', 'WriteTransport',
+    'Transport', 'DatagramTransport', 'SubprocessTransport',
+)
+
+
+class BaseTransport:
+    """Base class for transports."""
+
+    __slots__ = ('_extra',)
+
+    def __init__(self, extra=None):
+        if extra is None:
+            extra = {}
+        self._extra = extra
+
+    def get_extra_info(self, name, default=None):
+        """Get optional transport information."""
+        return self._extra.get(name, default)
+
+    def is_closing(self):
+        """Return True if the transport is closing or closed."""
+        raise NotImplementedError
+
+    def close(self):
+        """Close the transport.
+
+        Buffered data will be flushed asynchronously.  No more data
+        will be received.  After all buffered data is flushed, the
+        protocol's connection_lost() method will (eventually) be
+        called with None as its argument.
+        """
+        raise NotImplementedError
+
+    def set_protocol(self, protocol):
+        """Set a new protocol."""
+        raise NotImplementedError
+
+    def get_protocol(self):
+        """Return the current protocol."""
+        raise NotImplementedError
+
+
+class ReadTransport(BaseTransport):
+    """Interface for read-only transports."""
+
+    __slots__ = ()
+
+    def is_reading(self):
+        """Return True if the transport is receiving."""
+        raise NotImplementedError
+
+    def pause_reading(self):
+        """Pause the receiving end.
+
+        No data will be passed to the protocol's data_received()
+        method until resume_reading() is called.
+        """
+        raise NotImplementedError
+
+    def resume_reading(self):
+        """Resume the receiving end.
+
+        Data received will once again be passed to the protocol's
+        data_received() method.
+        """
+        raise NotImplementedError
+
+
+class WriteTransport(BaseTransport):
+    """Interface for write-only transports."""
+
+    __slots__ = ()
+
+    def set_write_buffer_limits(self, high=None, low=None):
+        """Set the high- and low-water limits for write flow control.
+
+        These two values control when to call the protocol's
+        pause_writing() and resume_writing() methods.  If specified,
+        the low-water limit must be less than or equal to the
+        high-water limit.  Neither value can be negative.
+
+        The defaults are implementation-specific.  If only the
+        high-water limit is given, the low-water limit defaults to an
+        implementation-specific value less than or equal to the
+        high-water limit.  Setting high to zero forces low to zero as
+        well, and causes pause_writing() to be called whenever the
+        buffer becomes non-empty.  Setting low to zero causes
+        resume_writing() to be called only once the buffer is empty.
+        Use of zero for either limit is generally sub-optimal as it
+        reduces opportunities for doing I/O and computation
+        concurrently.
+        """
+        raise NotImplementedError
+
+    def get_write_buffer_size(self):
+        """Return the current size of the write buffer."""
+        raise NotImplementedError
+
+    def get_write_buffer_limits(self):
+        """Get the high and low watermarks for write flow control.
+        Return a tuple (low, high) where low and high are
+        positive number of bytes."""
+        raise NotImplementedError
+
+    def write(self, data):
+        """Write some data bytes to the transport.
+
+        This does not block; it buffers the data and arranges for it
+        to be sent out asynchronously.
+        """
+        raise NotImplementedError
+
+    def writelines(self, list_of_data):
+        """Write a list (or any iterable) of data bytes to the transport.
+
+        The default implementation concatenates the arguments and
+        calls write() on the result.
+        """
+        data = b''.join(list_of_data)
+        self.write(data)
+
+    def write_eof(self):
+        """Close the write end after flushing buffered data.
+
+        (This is like typing ^D into a UNIX program reading from stdin.)
+
+        Data may still be received.
+        """
+        raise NotImplementedError
+
+    def can_write_eof(self):
+        """Return True if this transport supports write_eof(), False if not."""
+        raise NotImplementedError
+
+    def abort(self):
+        """Close the transport immediately.
+
+        Buffered data will be lost.  No more data will be received.
+        The protocol's connection_lost() method will (eventually) be
+        called with None as its argument.
+        """
+        raise NotImplementedError
+
+
+class Transport(ReadTransport, WriteTransport):
+    """Interface representing a bidirectional transport.
+
+    There may be several implementations, but typically, the user does
+    not implement new transports; rather, the platform provides some
+    useful transports that are implemented using the platform's best
+    practices.
+
+    The user never instantiates a transport directly; they call a
+    utility function, passing it a protocol factory and other
+    information necessary to create the transport and protocol.  (E.g.
+    EventLoop.create_connection() or EventLoop.create_server().)
+
+    The utility function will asynchronously create a transport and a
+    protocol and hook them up by calling the protocol's
+    connection_made() method, passing it the transport.
+
+    The implementation here raises NotImplemented for every method
+    except writelines(), which calls write() in a loop.
+    """
+
+    __slots__ = ()
+
+
+class DatagramTransport(BaseTransport):
+    """Interface for datagram (UDP) transports."""
+
+    __slots__ = ()
+
+    def sendto(self, data, addr=None):
+        """Send data to the transport.
+
+        This does not block; it buffers the data and arranges for it
+        to be sent out asynchronously.
+        addr is target socket address.
+        If addr is None use target address pointed on transport creation.
+        If data is an empty bytes object a zero-length datagram will be
+        sent.
+        """
+        raise NotImplementedError
+
+    def abort(self):
+        """Close the transport immediately.
+
+        Buffered data will be lost.  No more data will be received.
+        The protocol's connection_lost() method will (eventually) be
+        called with None as its argument.
+        """
+        raise NotImplementedError
+
+
+class SubprocessTransport(BaseTransport):
+
+    __slots__ = ()
+
+    def get_pid(self):
+        """Get subprocess id."""
+        raise NotImplementedError
+
+    def get_returncode(self):
+        """Get subprocess returncode.
+
+        See also
+        http://docs.python.org/3/library/subprocess#subprocess.Popen.returncode
+        """
+        raise NotImplementedError
+
+    def get_pipe_transport(self, fd):
+        """Get transport for pipe with number fd."""
+        raise NotImplementedError
+
+    def send_signal(self, signal):
+        """Send signal to subprocess.
+
+        See also:
+        docs.python.org/3/library/subprocess#subprocess.Popen.send_signal
+        """
+        raise NotImplementedError
+
+    def terminate(self):
+        """Stop the subprocess.
+
+        Alias for close() method.
+
+        On Posix OSs the method sends SIGTERM to the subprocess.
+        On Windows the Win32 API function TerminateProcess()
+         is called to stop the subprocess.
+
+        See also:
+        http://docs.python.org/3/library/subprocess#subprocess.Popen.terminate
+        """
+        raise NotImplementedError
+
+    def kill(self):
+        """Kill the subprocess.
+
+        On Posix OSs the function sends SIGKILL to the subprocess.
+        On Windows kill() is an alias for terminate().
+
+        See also:
+        http://docs.python.org/3/library/subprocess#subprocess.Popen.kill
+        """
+        raise NotImplementedError
+
+
+class _FlowControlMixin(Transport):
+    """All the logic for (write) flow control in a mix-in base class.
+
+    The subclass must implement get_write_buffer_size().  It must call
+    _maybe_pause_protocol() whenever the write buffer size increases,
+    and _maybe_resume_protocol() whenever it decreases.  It may also
+    override set_write_buffer_limits() (e.g. to specify different
+    defaults).
+
+    The subclass constructor must call super().__init__(extra).  This
+    will call set_write_buffer_limits().
+
+    The user may call set_write_buffer_limits() and
+    get_write_buffer_size(), and their protocol's pause_writing() and
+    resume_writing() may be called.
+    """
+
+    __slots__ = ('_loop', '_protocol_paused', '_high_water', '_low_water')
+
+    def __init__(self, extra=None, loop=None):
+        super().__init__(extra)
+        assert loop is not None
+        self._loop = loop
+        self._protocol_paused = False
+        self._set_write_buffer_limits()
+
+    def _maybe_pause_protocol(self):
+        size = self.get_write_buffer_size()
+        if size <= self._high_water:
+            return
+        if not self._protocol_paused:
+            self._protocol_paused = True
+            try:
+                self._protocol.pause_writing()
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._loop.call_exception_handler({
+                    'message': 'protocol.pause_writing() failed',
+                    'exception': exc,
+                    'transport': self,
+                    'protocol': self._protocol,
+                })
+
+    def _maybe_resume_protocol(self):
+        if (self._protocol_paused and
+                self.get_write_buffer_size() <= self._low_water):
+            self._protocol_paused = False
+            try:
+                self._protocol.resume_writing()
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._loop.call_exception_handler({
+                    'message': 'protocol.resume_writing() failed',
+                    'exception': exc,
+                    'transport': self,
+                    'protocol': self._protocol,
+                })
+
+    def get_write_buffer_limits(self):
+        return (self._low_water, self._high_water)
+
+    def _set_write_buffer_limits(self, high=None, low=None):
+        if high is None:
+            if low is None:
+                high = 64 * 1024
+            else:
+                high = 4 * low
+        if low is None:
+            low = high // 4
+
+        if not high >= low >= 0:
+            raise ValueError(
+                f'high ({high!r}) must be >= low ({low!r}) must be >= 0')
+
+        self._high_water = high
+        self._low_water = low
+
+    def set_write_buffer_limits(self, high=None, low=None):
+        self._set_write_buffer_limits(high=high, low=low)
+        self._maybe_pause_protocol()
+
+    def get_write_buffer_size(self):
+        raise NotImplementedError
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/trsock.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/trsock.py
new file mode 100644
index 0000000000000000000000000000000000000000..c1f20473b32030c0a124fbe676acc5ee5535ed8b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/trsock.py
@@ -0,0 +1,98 @@
+import socket
+
+
+class TransportSocket:
+
+    """A socket-like wrapper for exposing real transport sockets.
+
+    These objects can be safely returned by APIs like
+    `transport.get_extra_info('socket')`.  All potentially disruptive
+    operations (like "socket.close()") are banned.
+    """
+
+    __slots__ = ('_sock',)
+
+    def __init__(self, sock: socket.socket):
+        self._sock = sock
+
+    @property
+    def family(self):
+        return self._sock.family
+
+    @property
+    def type(self):
+        return self._sock.type
+
+    @property
+    def proto(self):
+        return self._sock.proto
+
+    def __repr__(self):
+        s = (
+            f"<asyncio.TransportSocket fd={self.fileno()}, "
+            f"family={self.family!s}, type={self.type!s}, "
+            f"proto={self.proto}"
+        )
+
+        if self.fileno() != -1:
+            try:
+                laddr = self.getsockname()
+                if laddr:
+                    s = f"{s}, laddr={laddr}"
+            except socket.error:
+                pass
+            try:
+                raddr = self.getpeername()
+                if raddr:
+                    s = f"{s}, raddr={raddr}"
+            except socket.error:
+                pass
+
+        return f"{s}>"
+
+    def __getstate__(self):
+        raise TypeError("Cannot serialize asyncio.TransportSocket object")
+
+    def fileno(self):
+        return self._sock.fileno()
+
+    def dup(self):
+        return self._sock.dup()
+
+    def get_inheritable(self):
+        return self._sock.get_inheritable()
+
+    def shutdown(self, how):
+        # asyncio doesn't currently provide a high-level transport API
+        # to shutdown the connection.
+        self._sock.shutdown(how)
+
+    def getsockopt(self, *args, **kwargs):
+        return self._sock.getsockopt(*args, **kwargs)
+
+    def setsockopt(self, *args, **kwargs):
+        self._sock.setsockopt(*args, **kwargs)
+
+    def getpeername(self):
+        return self._sock.getpeername()
+
+    def getsockname(self):
+        return self._sock.getsockname()
+
+    def getsockbyname(self):
+        return self._sock.getsockbyname()
+
+    def settimeout(self, value):
+        if value == 0:
+            return
+        raise ValueError(
+            'settimeout(): only 0 timeout is allowed on transport sockets')
+
+    def gettimeout(self):
+        return 0
+
+    def setblocking(self, flag):
+        if not flag:
+            return
+        raise ValueError(
+            'setblocking(): transport sockets cannot be blocking')
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/unix_events.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/unix_events.py
new file mode 100644
index 0000000000000000000000000000000000000000..1c1458127db5ac19c8277d73a1bbdc7c4832a1dc
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/unix_events.py
@@ -0,0 +1,972 @@
+"""Selector event loop for Unix with signal handling."""
+
+import errno
+import io
+import itertools
+import os
+import selectors
+import signal
+import socket
+import stat
+import subprocess
+import sys
+import threading
+import warnings
+
+from . import base_events
+from . import base_subprocess
+from . import constants
+from . import coroutines
+from . import events
+from . import exceptions
+from . import futures
+from . import selector_events
+from . import tasks
+from . import transports
+from .log import logger
+
+
+__all__ = (
+    'SelectorEventLoop',
+    'EventLoop',
+)
+
+
+if sys.platform == 'win32':  # pragma: no cover
+    raise ImportError('Signals are not really supported on Windows')
+
+
+def _sighandler_noop(signum, frame):
+    """Dummy signal handler."""
+    pass
+
+
+def waitstatus_to_exitcode(status):
+    try:
+        return os.waitstatus_to_exitcode(status)
+    except ValueError:
+        # The child exited, but we don't understand its status.
+        # This shouldn't happen, but if it does, let's just
+        # return that status; perhaps that helps debug it.
+        return status
+
+
+class _UnixSelectorEventLoop(selector_events.BaseSelectorEventLoop):
+    """Unix event loop.
+
+    Adds signal handling and UNIX Domain Socket support to SelectorEventLoop.
+    """
+
+    def __init__(self, selector=None):
+        super().__init__(selector)
+        self._signal_handlers = {}
+        self._unix_server_sockets = {}
+        if can_use_pidfd():
+            self._watcher = _PidfdChildWatcher()
+        else:
+            self._watcher = _ThreadedChildWatcher()
+
+    def close(self):
+        super().close()
+        if not sys.is_finalizing():
+            for sig in list(self._signal_handlers):
+                self.remove_signal_handler(sig)
+        else:
+            if self._signal_handlers:
+                warnings.warn(f"Closing the loop {self!r} "
+                              f"on interpreter shutdown "
+                              f"stage, skipping signal handlers removal",
+                              ResourceWarning,
+                              source=self)
+                self._signal_handlers.clear()
+
+    def _process_self_data(self, data):
+        for signum in data:
+            if not signum:
+                # ignore null bytes written by _write_to_self()
+                continue
+            self._handle_signal(signum)
+
+    def add_signal_handler(self, sig, callback, *args):
+        """Add a handler for a signal.  UNIX only.
+
+        Raise ValueError if the signal number is invalid or uncatchable.
+        Raise RuntimeError if there is a problem setting up the handler.
+        """
+        if (coroutines.iscoroutine(callback) or
+                coroutines._iscoroutinefunction(callback)):
+            raise TypeError("coroutines cannot be used "
+                            "with add_signal_handler()")
+        self._check_signal(sig)
+        self._check_closed()
+        try:
+            # set_wakeup_fd() raises ValueError if this is not the
+            # main thread.  By calling it early we ensure that an
+            # event loop running in another thread cannot add a signal
+            # handler.
+            signal.set_wakeup_fd(self._csock.fileno())
+        except (ValueError, OSError) as exc:
+            raise RuntimeError(str(exc))
+
+        handle = events.Handle(callback, args, self, None)
+        self._signal_handlers[sig] = handle
+
+        try:
+            # Register a dummy signal handler to ask Python to write the signal
+            # number in the wakeup file descriptor. _process_self_data() will
+            # read signal numbers from this file descriptor to handle signals.
+            signal.signal(sig, _sighandler_noop)
+
+            # Set SA_RESTART to limit EINTR occurrences.
+            signal.siginterrupt(sig, False)
+        except OSError as exc:
+            del self._signal_handlers[sig]
+            if not self._signal_handlers:
+                try:
+                    signal.set_wakeup_fd(-1)
+                except (ValueError, OSError) as nexc:
+                    logger.info('set_wakeup_fd(-1) failed: %s', nexc)
+
+            if exc.errno == errno.EINVAL:
+                raise RuntimeError(f'sig {sig} cannot be caught')
+            else:
+                raise
+
+    def _handle_signal(self, sig):
+        """Internal helper that is the actual signal handler."""
+        handle = self._signal_handlers.get(sig)
+        if handle is None:
+            return  # Assume it's some race condition.
+        if handle._cancelled:
+            self.remove_signal_handler(sig)  # Remove it properly.
+        else:
+            self._add_callback_signalsafe(handle)
+
+    def remove_signal_handler(self, sig):
+        """Remove a handler for a signal.  UNIX only.
+
+        Return True if a signal handler was removed, False if not.
+        """
+        self._check_signal(sig)
+        try:
+            del self._signal_handlers[sig]
+        except KeyError:
+            return False
+
+        if sig == signal.SIGINT:
+            handler = signal.default_int_handler
+        else:
+            handler = signal.SIG_DFL
+
+        try:
+            signal.signal(sig, handler)
+        except OSError as exc:
+            if exc.errno == errno.EINVAL:
+                raise RuntimeError(f'sig {sig} cannot be caught')
+            else:
+                raise
+
+        if not self._signal_handlers:
+            try:
+                signal.set_wakeup_fd(-1)
+            except (ValueError, OSError) as exc:
+                logger.info('set_wakeup_fd(-1) failed: %s', exc)
+
+        return True
+
+    def _check_signal(self, sig):
+        """Internal helper to validate a signal.
+
+        Raise ValueError if the signal number is invalid or uncatchable.
+        Raise RuntimeError if there is a problem setting up the handler.
+        """
+        if not isinstance(sig, int):
+            raise TypeError(f'sig must be an int, not {sig!r}')
+
+        if sig not in signal.valid_signals():
+            raise ValueError(f'invalid signal number {sig}')
+
+    def _make_read_pipe_transport(self, pipe, protocol, waiter=None,
+                                  extra=None):
+        return _UnixReadPipeTransport(self, pipe, protocol, waiter, extra)
+
+    def _make_write_pipe_transport(self, pipe, protocol, waiter=None,
+                                   extra=None):
+        return _UnixWritePipeTransport(self, pipe, protocol, waiter, extra)
+
+    async def _make_subprocess_transport(self, protocol, args, shell,
+                                         stdin, stdout, stderr, bufsize,
+                                         extra=None, **kwargs):
+        watcher = self._watcher
+        waiter = self.create_future()
+        transp = _UnixSubprocessTransport(self, protocol, args, shell,
+                                        stdin, stdout, stderr, bufsize,
+                                        waiter=waiter, extra=extra,
+                                        **kwargs)
+        watcher.add_child_handler(transp.get_pid(),
+                                self._child_watcher_callback, transp)
+        try:
+            await waiter
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException:
+            transp.close()
+            await transp._wait()
+            raise
+
+        return transp
+
+    def _child_watcher_callback(self, pid, returncode, transp):
+        self.call_soon_threadsafe(transp._process_exited, returncode)
+
+    async def create_unix_connection(
+            self, protocol_factory, path=None, *,
+            ssl=None, sock=None,
+            server_hostname=None,
+            ssl_handshake_timeout=None,
+            ssl_shutdown_timeout=None):
+        assert server_hostname is None or isinstance(server_hostname, str)
+        if ssl:
+            if server_hostname is None:
+                raise ValueError(
+                    'you have to pass server_hostname when using ssl')
+        else:
+            if server_hostname is not None:
+                raise ValueError('server_hostname is only meaningful with ssl')
+            if ssl_handshake_timeout is not None:
+                raise ValueError(
+                    'ssl_handshake_timeout is only meaningful with ssl')
+            if ssl_shutdown_timeout is not None:
+                raise ValueError(
+                    'ssl_shutdown_timeout is only meaningful with ssl')
+
+        if path is not None:
+            if sock is not None:
+                raise ValueError(
+                    'path and sock can not be specified at the same time')
+
+            path = os.fspath(path)
+            sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM, 0)
+            try:
+                sock.setblocking(False)
+                await self.sock_connect(sock, path)
+            except:
+                sock.close()
+                raise
+
+        else:
+            if sock is None:
+                raise ValueError('no path and sock were specified')
+            if (sock.family != socket.AF_UNIX or
+                    sock.type != socket.SOCK_STREAM):
+                raise ValueError(
+                    f'A UNIX Domain Stream Socket was expected, got {sock!r}')
+            sock.setblocking(False)
+
+        transport, protocol = await self._create_connection_transport(
+            sock, protocol_factory, ssl, server_hostname,
+            ssl_handshake_timeout=ssl_handshake_timeout,
+            ssl_shutdown_timeout=ssl_shutdown_timeout)
+        return transport, protocol
+
+    async def create_unix_server(
+            self, protocol_factory, path=None, *,
+            sock=None, backlog=100, ssl=None,
+            ssl_handshake_timeout=None,
+            ssl_shutdown_timeout=None,
+            start_serving=True, cleanup_socket=True):
+        if isinstance(ssl, bool):
+            raise TypeError('ssl argument must be an SSLContext or None')
+
+        if ssl_handshake_timeout is not None and not ssl:
+            raise ValueError(
+                'ssl_handshake_timeout is only meaningful with ssl')
+
+        if ssl_shutdown_timeout is not None and not ssl:
+            raise ValueError(
+                'ssl_shutdown_timeout is only meaningful with ssl')
+
+        if path is not None:
+            if sock is not None:
+                raise ValueError(
+                    'path and sock can not be specified at the same time')
+
+            path = os.fspath(path)
+            sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+
+            # Check for abstract socket. `str` and `bytes` paths are supported.
+            if path[0] not in (0, '\x00'):
+                try:
+                    if stat.S_ISSOCK(os.stat(path).st_mode):
+                        os.remove(path)
+                except FileNotFoundError:
+                    pass
+                except OSError as err:
+                    # Directory may have permissions only to create socket.
+                    logger.error('Unable to check or remove stale UNIX socket '
+                                 '%r: %r', path, err)
+
+            try:
+                sock.bind(path)
+            except OSError as exc:
+                sock.close()
+                if exc.errno == errno.EADDRINUSE:
+                    # Let's improve the error message by adding
+                    # with what exact address it occurs.
+                    msg = f'Address {path!r} is already in use'
+                    raise OSError(errno.EADDRINUSE, msg) from None
+                else:
+                    raise
+            except:
+                sock.close()
+                raise
+        else:
+            if sock is None:
+                raise ValueError(
+                    'path was not specified, and no sock specified')
+
+            if (sock.family != socket.AF_UNIX or
+                    sock.type != socket.SOCK_STREAM):
+                raise ValueError(
+                    f'A UNIX Domain Stream Socket was expected, got {sock!r}')
+
+        if cleanup_socket:
+            path = sock.getsockname()
+            # Check for abstract socket. `str` and `bytes` paths are supported.
+            if path[0] not in (0, '\x00'):
+                try:
+                    self._unix_server_sockets[sock] = os.stat(path).st_ino
+                except FileNotFoundError:
+                    pass
+
+        sock.setblocking(False)
+        server = base_events.Server(self, [sock], protocol_factory,
+                                    ssl, backlog, ssl_handshake_timeout,
+                                    ssl_shutdown_timeout)
+        if start_serving:
+            server._start_serving()
+            # Skip one loop iteration so that all 'loop.add_reader'
+            # go through.
+            await tasks.sleep(0)
+
+        return server
+
+    async def _sock_sendfile_native(self, sock, file, offset, count):
+        try:
+            os.sendfile
+        except AttributeError:
+            raise exceptions.SendfileNotAvailableError(
+                "os.sendfile() is not available")
+        try:
+            fileno = file.fileno()
+        except (AttributeError, io.UnsupportedOperation) as err:
+            raise exceptions.SendfileNotAvailableError("not a regular file")
+        try:
+            fsize = os.fstat(fileno).st_size
+        except OSError:
+            raise exceptions.SendfileNotAvailableError("not a regular file")
+        blocksize = count if count else fsize
+        if not blocksize:
+            return 0  # empty file
+
+        fut = self.create_future()
+        self._sock_sendfile_native_impl(fut, None, sock, fileno,
+                                        offset, count, blocksize, 0)
+        return await fut
+
+    def _sock_sendfile_native_impl(self, fut, registered_fd, sock, fileno,
+                                   offset, count, blocksize, total_sent):
+        fd = sock.fileno()
+        if registered_fd is not None:
+            # Remove the callback early.  It should be rare that the
+            # selector says the fd is ready but the call still returns
+            # EAGAIN, and I am willing to take a hit in that case in
+            # order to simplify the common case.
+            self.remove_writer(registered_fd)
+        if fut.cancelled():
+            self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+            return
+        if count:
+            blocksize = count - total_sent
+            if blocksize <= 0:
+                self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+                fut.set_result(total_sent)
+                return
+
+        # On 32-bit architectures truncate to 1GiB to avoid OverflowError
+        blocksize = min(blocksize, sys.maxsize//2 + 1)
+
+        try:
+            sent = os.sendfile(fd, fileno, offset, blocksize)
+        except (BlockingIOError, InterruptedError):
+            if registered_fd is None:
+                self._sock_add_cancellation_callback(fut, sock)
+            self.add_writer(fd, self._sock_sendfile_native_impl, fut,
+                            fd, sock, fileno,
+                            offset, count, blocksize, total_sent)
+        except OSError as exc:
+            if (registered_fd is not None and
+                    exc.errno == errno.ENOTCONN and
+                    type(exc) is not ConnectionError):
+                # If we have an ENOTCONN and this isn't a first call to
+                # sendfile(), i.e. the connection was closed in the middle
+                # of the operation, normalize the error to ConnectionError
+                # to make it consistent across all Posix systems.
+                new_exc = ConnectionError(
+                    "socket is not connected", errno.ENOTCONN)
+                new_exc.__cause__ = exc
+                exc = new_exc
+            if total_sent == 0:
+                # We can get here for different reasons, the main
+                # one being 'file' is not a regular mmap(2)-like
+                # file, in which case we'll fall back on using
+                # plain send().
+                err = exceptions.SendfileNotAvailableError(
+                    "os.sendfile call failed")
+                self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+                fut.set_exception(err)
+            else:
+                self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+                fut.set_exception(exc)
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+            fut.set_exception(exc)
+        else:
+            if sent == 0:
+                # EOF
+                self._sock_sendfile_update_filepos(fileno, offset, total_sent)
+                fut.set_result(total_sent)
+            else:
+                offset += sent
+                total_sent += sent
+                if registered_fd is None:
+                    self._sock_add_cancellation_callback(fut, sock)
+                self.add_writer(fd, self._sock_sendfile_native_impl, fut,
+                                fd, sock, fileno,
+                                offset, count, blocksize, total_sent)
+
+    def _sock_sendfile_update_filepos(self, fileno, offset, total_sent):
+        if total_sent > 0:
+            os.lseek(fileno, offset, os.SEEK_SET)
+
+    def _sock_add_cancellation_callback(self, fut, sock):
+        def cb(fut):
+            if fut.cancelled():
+                fd = sock.fileno()
+                if fd != -1:
+                    self.remove_writer(fd)
+        fut.add_done_callback(cb)
+
+    def _stop_serving(self, sock):
+        # Is this a unix socket that needs cleanup?
+        if sock in self._unix_server_sockets:
+            path = sock.getsockname()
+        else:
+            path = None
+
+        super()._stop_serving(sock)
+
+        if path is not None:
+            prev_ino = self._unix_server_sockets[sock]
+            del self._unix_server_sockets[sock]
+            try:
+                if os.stat(path).st_ino == prev_ino:
+                    os.unlink(path)
+            except FileNotFoundError:
+                pass
+            except OSError as err:
+                logger.error('Unable to clean up listening UNIX socket '
+                             '%r: %r', path, err)
+
+
+class _UnixReadPipeTransport(transports.ReadTransport):
+
+    max_size = 256 * 1024  # max bytes we read in one event loop iteration
+
+    def __init__(self, loop, pipe, protocol, waiter=None, extra=None):
+        super().__init__(extra)
+        self._extra['pipe'] = pipe
+        self._loop = loop
+        self._pipe = pipe
+        self._fileno = pipe.fileno()
+        self._protocol = protocol
+        self._closing = False
+        self._paused = False
+
+        mode = os.fstat(self._fileno).st_mode
+        if not (stat.S_ISFIFO(mode) or
+                stat.S_ISSOCK(mode) or
+                stat.S_ISCHR(mode)):
+            self._pipe = None
+            self._fileno = None
+            self._protocol = None
+            raise ValueError("Pipe transport is for pipes/sockets only.")
+
+        os.set_blocking(self._fileno, False)
+
+        self._loop.call_soon(self._protocol.connection_made, self)
+        # only start reading when connection_made() has been called
+        self._loop.call_soon(self._add_reader,
+                             self._fileno, self._read_ready)
+        if waiter is not None:
+            # only wake up the waiter when connection_made() has been called
+            self._loop.call_soon(futures._set_result_unless_cancelled,
+                                 waiter, None)
+
+    def _add_reader(self, fd, callback):
+        if not self.is_reading():
+            return
+        self._loop._add_reader(fd, callback)
+
+    def is_reading(self):
+        return not self._paused and not self._closing
+
+    def __repr__(self):
+        info = [self.__class__.__name__]
+        if self._pipe is None:
+            info.append('closed')
+        elif self._closing:
+            info.append('closing')
+        info.append(f'fd={self._fileno}')
+        selector = getattr(self._loop, '_selector', None)
+        if self._pipe is not None and selector is not None:
+            polling = selector_events._test_selector_event(
+                selector, self._fileno, selectors.EVENT_READ)
+            if polling:
+                info.append('polling')
+            else:
+                info.append('idle')
+        elif self._pipe is not None:
+            info.append('open')
+        else:
+            info.append('closed')
+        return '<{}>'.format(' '.join(info))
+
+    def _read_ready(self):
+        try:
+            data = os.read(self._fileno, self.max_size)
+        except (BlockingIOError, InterruptedError):
+            pass
+        except OSError as exc:
+            self._fatal_error(exc, 'Fatal read error on pipe transport')
+        else:
+            if data:
+                self._protocol.data_received(data)
+            else:
+                if self._loop.get_debug():
+                    logger.info("%r was closed by peer", self)
+                self._closing = True
+                self._loop._remove_reader(self._fileno)
+                self._loop.call_soon(self._protocol.eof_received)
+                self._loop.call_soon(self._call_connection_lost, None)
+
+    def pause_reading(self):
+        if not self.is_reading():
+            return
+        self._paused = True
+        self._loop._remove_reader(self._fileno)
+        if self._loop.get_debug():
+            logger.debug("%r pauses reading", self)
+
+    def resume_reading(self):
+        if self._closing or not self._paused:
+            return
+        self._paused = False
+        self._loop._add_reader(self._fileno, self._read_ready)
+        if self._loop.get_debug():
+            logger.debug("%r resumes reading", self)
+
+    def set_protocol(self, protocol):
+        self._protocol = protocol
+
+    def get_protocol(self):
+        return self._protocol
+
+    def is_closing(self):
+        return self._closing
+
+    def close(self):
+        if not self._closing:
+            self._close(None)
+
+    def __del__(self, _warn=warnings.warn):
+        if self._pipe is not None:
+            _warn(f"unclosed transport {self!r}", ResourceWarning, source=self)
+            self._pipe.close()
+
+    def _fatal_error(self, exc, message='Fatal error on pipe transport'):
+        # should be called by exception handler only
+        if (isinstance(exc, OSError) and exc.errno == errno.EIO):
+            if self._loop.get_debug():
+                logger.debug("%r: %s", self, message, exc_info=True)
+        else:
+            self._loop.call_exception_handler({
+                'message': message,
+                'exception': exc,
+                'transport': self,
+                'protocol': self._protocol,
+            })
+        self._close(exc)
+
+    def _close(self, exc):
+        self._closing = True
+        self._loop._remove_reader(self._fileno)
+        self._loop.call_soon(self._call_connection_lost, exc)
+
+    def _call_connection_lost(self, exc):
+        try:
+            self._protocol.connection_lost(exc)
+        finally:
+            self._pipe.close()
+            self._pipe = None
+            self._protocol = None
+            self._loop = None
+
+
+class _UnixWritePipeTransport(transports._FlowControlMixin,
+                              transports.WriteTransport):
+
+    def __init__(self, loop, pipe, protocol, waiter=None, extra=None):
+        super().__init__(extra, loop)
+        self._extra['pipe'] = pipe
+        self._pipe = pipe
+        self._fileno = pipe.fileno()
+        self._protocol = protocol
+        self._buffer = bytearray()
+        self._conn_lost = 0
+        self._closing = False  # Set when close() or write_eof() called.
+
+        mode = os.fstat(self._fileno).st_mode
+        is_char = stat.S_ISCHR(mode)
+        is_fifo = stat.S_ISFIFO(mode)
+        is_socket = stat.S_ISSOCK(mode)
+        if not (is_char or is_fifo or is_socket):
+            self._pipe = None
+            self._fileno = None
+            self._protocol = None
+            raise ValueError("Pipe transport is only for "
+                             "pipes, sockets and character devices")
+
+        os.set_blocking(self._fileno, False)
+        self._loop.call_soon(self._protocol.connection_made, self)
+
+        # On AIX, the reader trick (to be notified when the read end of the
+        # socket is closed) only works for sockets. On other platforms it
+        # works for pipes and sockets. (Exception: OS X 10.4?  Issue #19294.)
+        if is_socket or (is_fifo and not sys.platform.startswith("aix")):
+            # only start reading when connection_made() has been called
+            self._loop.call_soon(self._loop._add_reader,
+                                 self._fileno, self._read_ready)
+
+        if waiter is not None:
+            # only wake up the waiter when connection_made() has been called
+            self._loop.call_soon(futures._set_result_unless_cancelled,
+                                 waiter, None)
+
+    def __repr__(self):
+        info = [self.__class__.__name__]
+        if self._pipe is None:
+            info.append('closed')
+        elif self._closing:
+            info.append('closing')
+        info.append(f'fd={self._fileno}')
+        selector = getattr(self._loop, '_selector', None)
+        if self._pipe is not None and selector is not None:
+            polling = selector_events._test_selector_event(
+                selector, self._fileno, selectors.EVENT_WRITE)
+            if polling:
+                info.append('polling')
+            else:
+                info.append('idle')
+
+            bufsize = self.get_write_buffer_size()
+            info.append(f'bufsize={bufsize}')
+        elif self._pipe is not None:
+            info.append('open')
+        else:
+            info.append('closed')
+        return '<{}>'.format(' '.join(info))
+
+    def get_write_buffer_size(self):
+        return len(self._buffer)
+
+    def _read_ready(self):
+        # Pipe was closed by peer.
+        if self._loop.get_debug():
+            logger.info("%r was closed by peer", self)
+        if self._buffer:
+            self._close(BrokenPipeError())
+        else:
+            self._close()
+
+    def write(self, data):
+        assert isinstance(data, (bytes, bytearray, memoryview)), repr(data)
+        if isinstance(data, bytearray):
+            data = memoryview(data)
+        if not data:
+            return
+
+        if self._conn_lost or self._closing:
+            if self._conn_lost >= constants.LOG_THRESHOLD_FOR_CONNLOST_WRITES:
+                logger.warning('pipe closed by peer or '
+                               'os.write(pipe, data) raised exception.')
+            self._conn_lost += 1
+            return
+
+        if not self._buffer:
+            # Attempt to send it right away first.
+            try:
+                n = os.write(self._fileno, data)
+            except (BlockingIOError, InterruptedError):
+                n = 0
+            except (SystemExit, KeyboardInterrupt):
+                raise
+            except BaseException as exc:
+                self._conn_lost += 1
+                self._fatal_error(exc, 'Fatal write error on pipe transport')
+                return
+            if n == len(data):
+                return
+            elif n > 0:
+                data = memoryview(data)[n:]
+            self._loop._add_writer(self._fileno, self._write_ready)
+
+        self._buffer += data
+        self._maybe_pause_protocol()
+
+    def _write_ready(self):
+        assert self._buffer, 'Data should not be empty'
+
+        try:
+            n = os.write(self._fileno, self._buffer)
+        except (BlockingIOError, InterruptedError):
+            pass
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException as exc:
+            self._buffer.clear()
+            self._conn_lost += 1
+            # Remove writer here, _fatal_error() doesn't it
+            # because _buffer is empty.
+            self._loop._remove_writer(self._fileno)
+            self._fatal_error(exc, 'Fatal write error on pipe transport')
+        else:
+            if n == len(self._buffer):
+                self._buffer.clear()
+                self._loop._remove_writer(self._fileno)
+                self._maybe_resume_protocol()  # May append to buffer.
+                if self._closing:
+                    self._loop._remove_reader(self._fileno)
+                    self._call_connection_lost(None)
+                return
+            elif n > 0:
+                del self._buffer[:n]
+
+    def can_write_eof(self):
+        return True
+
+    def write_eof(self):
+        if self._closing:
+            return
+        assert self._pipe
+        self._closing = True
+        if not self._buffer:
+            self._loop._remove_reader(self._fileno)
+            self._loop.call_soon(self._call_connection_lost, None)
+
+    def set_protocol(self, protocol):
+        self._protocol = protocol
+
+    def get_protocol(self):
+        return self._protocol
+
+    def is_closing(self):
+        return self._closing
+
+    def close(self):
+        if self._pipe is not None and not self._closing:
+            # write_eof is all what we needed to close the write pipe
+            self.write_eof()
+
+    def __del__(self, _warn=warnings.warn):
+        if self._pipe is not None:
+            _warn(f"unclosed transport {self!r}", ResourceWarning, source=self)
+            self._pipe.close()
+
+    def abort(self):
+        self._close(None)
+
+    def _fatal_error(self, exc, message='Fatal error on pipe transport'):
+        # should be called by exception handler only
+        if isinstance(exc, OSError):
+            if self._loop.get_debug():
+                logger.debug("%r: %s", self, message, exc_info=True)
+        else:
+            self._loop.call_exception_handler({
+                'message': message,
+                'exception': exc,
+                'transport': self,
+                'protocol': self._protocol,
+            })
+        self._close(exc)
+
+    def _close(self, exc=None):
+        self._closing = True
+        if self._buffer:
+            self._loop._remove_writer(self._fileno)
+        self._buffer.clear()
+        self._loop._remove_reader(self._fileno)
+        self._loop.call_soon(self._call_connection_lost, exc)
+
+    def _call_connection_lost(self, exc):
+        try:
+            self._protocol.connection_lost(exc)
+        finally:
+            self._pipe.close()
+            self._pipe = None
+            self._protocol = None
+            self._loop = None
+
+
+class _UnixSubprocessTransport(base_subprocess.BaseSubprocessTransport):
+
+    def _start(self, args, shell, stdin, stdout, stderr, bufsize, **kwargs):
+        stdin_w = None
+        if stdin == subprocess.PIPE and sys.platform.startswith('aix'):
+            # Use a socket pair for stdin on AIX, since it does not
+            # support selecting read events on the write end of a
+            # socket (which we use in order to detect closing of the
+            # other end).
+            stdin, stdin_w = socket.socketpair()
+        try:
+            self._proc = subprocess.Popen(
+                args, shell=shell, stdin=stdin, stdout=stdout, stderr=stderr,
+                universal_newlines=False, bufsize=bufsize, **kwargs)
+            if stdin_w is not None:
+                stdin.close()
+                self._proc.stdin = open(stdin_w.detach(), 'wb', buffering=bufsize)
+                stdin_w = None
+        finally:
+            if stdin_w is not None:
+                stdin.close()
+                stdin_w.close()
+
+
+class _PidfdChildWatcher:
+    """Child watcher implementation using Linux's pid file descriptors.
+
+    This child watcher polls process file descriptors (pidfds) to await child
+    process termination. In some respects, PidfdChildWatcher is a "Goldilocks"
+    child watcher implementation. It doesn't require signals or threads, doesn't
+    interfere with any processes launched outside the event loop, and scales
+    linearly with the number of subprocesses launched by the event loop. The
+    main disadvantage is that pidfds are specific to Linux, and only work on
+    recent (5.3+) kernels.
+    """
+
+    def add_child_handler(self, pid, callback, *args):
+        loop = events.get_running_loop()
+        pidfd = os.pidfd_open(pid)
+        loop._add_reader(pidfd, self._do_wait, pid, pidfd, callback, args)
+
+    def _do_wait(self, pid, pidfd, callback, args):
+        loop = events.get_running_loop()
+        loop._remove_reader(pidfd)
+        try:
+            _, status = os.waitpid(pid, 0)
+        except ChildProcessError:
+            # The child process is already reaped
+            # (may happen if waitpid() is called elsewhere).
+            returncode = 255
+            logger.warning(
+                "child process pid %d exit status already read: "
+                " will report returncode 255",
+                pid)
+        else:
+            returncode = waitstatus_to_exitcode(status)
+
+        os.close(pidfd)
+        callback(pid, returncode, *args)
+
+class _ThreadedChildWatcher:
+    """Threaded child watcher implementation.
+
+    The watcher uses a thread per process
+    for waiting for the process finish.
+
+    It doesn't require subscription on POSIX signal
+    but a thread creation is not free.
+
+    The watcher has O(1) complexity, its performance doesn't depend
+    on amount of spawn processes.
+    """
+
+    def __init__(self):
+        self._pid_counter = itertools.count(0)
+        self._threads = {}
+
+    def __del__(self, _warn=warnings.warn):
+        threads = [thread for thread in list(self._threads.values())
+                   if thread.is_alive()]
+        if threads:
+            _warn(f"{self.__class__} has registered but not finished child processes",
+                  ResourceWarning,
+                  source=self)
+
+    def add_child_handler(self, pid, callback, *args):
+        loop = events.get_running_loop()
+        thread = threading.Thread(target=self._do_waitpid,
+                                  name=f"asyncio-waitpid-{next(self._pid_counter)}",
+                                  args=(loop, pid, callback, args),
+                                  daemon=True)
+        self._threads[pid] = thread
+        thread.start()
+
+    def _do_waitpid(self, loop, expected_pid, callback, args):
+        assert expected_pid > 0
+
+        try:
+            pid, status = os.waitpid(expected_pid, 0)
+        except ChildProcessError:
+            # The child process is already reaped
+            # (may happen if waitpid() is called elsewhere).
+            pid = expected_pid
+            returncode = 255
+            logger.warning(
+                "Unknown child process pid %d, will report returncode 255",
+                pid)
+        else:
+            returncode = waitstatus_to_exitcode(status)
+            if loop.get_debug():
+                logger.debug('process %s exited with returncode %s',
+                             expected_pid, returncode)
+
+        if loop.is_closed():
+            logger.warning("Loop %r that handles pid %r is closed", loop, pid)
+        else:
+            loop.call_soon_threadsafe(callback, pid, returncode, *args)
+
+        self._threads.pop(expected_pid)
+
+def can_use_pidfd():
+    if not hasattr(os, 'pidfd_open'):
+        return False
+    try:
+        pid = os.getpid()
+        os.close(os.pidfd_open(pid, 0))
+    except OSError:
+        # blocked by security policy like SECCOMP
+        return False
+    return True
+
+
+class _UnixDefaultEventLoopPolicy(events._BaseDefaultEventLoopPolicy):
+    """UNIX event loop policy"""
+    _loop_factory = _UnixSelectorEventLoop
+
+
+SelectorEventLoop = _UnixSelectorEventLoop
+_DefaultEventLoopPolicy = _UnixDefaultEventLoopPolicy
+EventLoop = SelectorEventLoop
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_events.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_events.py
new file mode 100644
index 0000000000000000000000000000000000000000..5f75b17d8ca649be6256f8ce9815c7fb6e0dda62
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_events.py
@@ -0,0 +1,903 @@
+"""Selector and proactor event loops for Windows."""
+
+import sys
+
+if sys.platform != 'win32':  # pragma: no cover
+    raise ImportError('win32 only')
+
+import _overlapped
+import _winapi
+import errno
+from functools import partial
+import math
+import msvcrt
+import socket
+import struct
+import time
+import weakref
+
+from . import events
+from . import base_subprocess
+from . import futures
+from . import exceptions
+from . import proactor_events
+from . import selector_events
+from . import tasks
+from . import windows_utils
+from .log import logger
+
+
+__all__ = (
+    'SelectorEventLoop', 'ProactorEventLoop', 'IocpProactor',
+    '_DefaultEventLoopPolicy', '_WindowsSelectorEventLoopPolicy',
+    '_WindowsProactorEventLoopPolicy', 'EventLoop',
+)
+
+
+NULL = _winapi.NULL
+INFINITE = _winapi.INFINITE
+ERROR_CONNECTION_REFUSED = 1225
+ERROR_CONNECTION_ABORTED = 1236
+
+# Initial delay in seconds for connect_pipe() before retrying to connect
+CONNECT_PIPE_INIT_DELAY = 0.001
+
+# Maximum delay in seconds for connect_pipe() before retrying to connect
+CONNECT_PIPE_MAX_DELAY = 0.100
+
+
+class _OverlappedFuture(futures.Future):
+    """Subclass of Future which represents an overlapped operation.
+
+    Cancelling it will immediately cancel the overlapped operation.
+    """
+
+    def __init__(self, ov, *, loop=None):
+        super().__init__(loop=loop)
+        if self._source_traceback:
+            del self._source_traceback[-1]
+        self._ov = ov
+
+    def _repr_info(self):
+        info = super()._repr_info()
+        if self._ov is not None:
+            state = 'pending' if self._ov.pending else 'completed'
+            info.insert(1, f'overlapped=<{state}, {self._ov.address:#x}>')
+        return info
+
+    def _cancel_overlapped(self):
+        if self._ov is None:
+            return
+        try:
+            self._ov.cancel()
+        except OSError as exc:
+            context = {
+                'message': 'Cancelling an overlapped future failed',
+                'exception': exc,
+                'future': self,
+            }
+            if self._source_traceback:
+                context['source_traceback'] = self._source_traceback
+            self._loop.call_exception_handler(context)
+        self._ov = None
+
+    def cancel(self, msg=None):
+        self._cancel_overlapped()
+        return super().cancel(msg=msg)
+
+    def set_exception(self, exception):
+        super().set_exception(exception)
+        self._cancel_overlapped()
+
+    def set_result(self, result):
+        super().set_result(result)
+        self._ov = None
+
+
+class _BaseWaitHandleFuture(futures.Future):
+    """Subclass of Future which represents a wait handle."""
+
+    def __init__(self, ov, handle, wait_handle, *, loop=None):
+        super().__init__(loop=loop)
+        if self._source_traceback:
+            del self._source_traceback[-1]
+        # Keep a reference to the Overlapped object to keep it alive until the
+        # wait is unregistered
+        self._ov = ov
+        self._handle = handle
+        self._wait_handle = wait_handle
+
+        # Should we call UnregisterWaitEx() if the wait completes
+        # or is cancelled?
+        self._registered = True
+
+    def _poll(self):
+        # non-blocking wait: use a timeout of 0 millisecond
+        return (_winapi.WaitForSingleObject(self._handle, 0) ==
+                _winapi.WAIT_OBJECT_0)
+
+    def _repr_info(self):
+        info = super()._repr_info()
+        info.append(f'handle={self._handle:#x}')
+        if self._handle is not None:
+            state = 'signaled' if self._poll() else 'waiting'
+            info.append(state)
+        if self._wait_handle is not None:
+            info.append(f'wait_handle={self._wait_handle:#x}')
+        return info
+
+    def _unregister_wait_cb(self, fut):
+        # The wait was unregistered: it's not safe to destroy the Overlapped
+        # object
+        self._ov = None
+
+    def _unregister_wait(self):
+        if not self._registered:
+            return
+        self._registered = False
+
+        wait_handle = self._wait_handle
+        self._wait_handle = None
+        try:
+            _overlapped.UnregisterWait(wait_handle)
+        except OSError as exc:
+            if exc.winerror != _overlapped.ERROR_IO_PENDING:
+                context = {
+                    'message': 'Failed to unregister the wait handle',
+                    'exception': exc,
+                    'future': self,
+                }
+                if self._source_traceback:
+                    context['source_traceback'] = self._source_traceback
+                self._loop.call_exception_handler(context)
+                return
+            # ERROR_IO_PENDING means that the unregister is pending
+
+        self._unregister_wait_cb(None)
+
+    def cancel(self, msg=None):
+        self._unregister_wait()
+        return super().cancel(msg=msg)
+
+    def set_exception(self, exception):
+        self._unregister_wait()
+        super().set_exception(exception)
+
+    def set_result(self, result):
+        self._unregister_wait()
+        super().set_result(result)
+
+
+class _WaitCancelFuture(_BaseWaitHandleFuture):
+    """Subclass of Future which represents a wait for the cancellation of a
+    _WaitHandleFuture using an event.
+    """
+
+    def __init__(self, ov, event, wait_handle, *, loop=None):
+        super().__init__(ov, event, wait_handle, loop=loop)
+
+        self._done_callback = None
+
+    def cancel(self):
+        raise RuntimeError("_WaitCancelFuture must not be cancelled")
+
+    def set_result(self, result):
+        super().set_result(result)
+        if self._done_callback is not None:
+            self._done_callback(self)
+
+    def set_exception(self, exception):
+        super().set_exception(exception)
+        if self._done_callback is not None:
+            self._done_callback(self)
+
+
+class _WaitHandleFuture(_BaseWaitHandleFuture):
+    def __init__(self, ov, handle, wait_handle, proactor, *, loop=None):
+        super().__init__(ov, handle, wait_handle, loop=loop)
+        self._proactor = proactor
+        self._unregister_proactor = True
+        self._event = _overlapped.CreateEvent(None, True, False, None)
+        self._event_fut = None
+
+    def _unregister_wait_cb(self, fut):
+        if self._event is not None:
+            _winapi.CloseHandle(self._event)
+            self._event = None
+            self._event_fut = None
+
+        # If the wait was cancelled, the wait may never be signalled, so
+        # it's required to unregister it. Otherwise, IocpProactor.close() will
+        # wait forever for an event which will never come.
+        #
+        # If the IocpProactor already received the event, it's safe to call
+        # _unregister() because we kept a reference to the Overlapped object
+        # which is used as a unique key.
+        self._proactor._unregister(self._ov)
+        self._proactor = None
+
+        super()._unregister_wait_cb(fut)
+
+    def _unregister_wait(self):
+        if not self._registered:
+            return
+        self._registered = False
+
+        wait_handle = self._wait_handle
+        self._wait_handle = None
+        try:
+            _overlapped.UnregisterWaitEx(wait_handle, self._event)
+        except OSError as exc:
+            if exc.winerror != _overlapped.ERROR_IO_PENDING:
+                context = {
+                    'message': 'Failed to unregister the wait handle',
+                    'exception': exc,
+                    'future': self,
+                }
+                if self._source_traceback:
+                    context['source_traceback'] = self._source_traceback
+                self._loop.call_exception_handler(context)
+                return
+            # ERROR_IO_PENDING is not an error, the wait was unregistered
+
+        self._event_fut = self._proactor._wait_cancel(self._event,
+                                                      self._unregister_wait_cb)
+
+
+class PipeServer(object):
+    """Class representing a pipe server.
+
+    This is much like a bound, listening socket.
+    """
+    def __init__(self, address):
+        self._address = address
+        self._free_instances = weakref.WeakSet()
+        # initialize the pipe attribute before calling _server_pipe_handle()
+        # because this function can raise an exception and the destructor calls
+        # the close() method
+        self._pipe = None
+        self._accept_pipe_future = None
+        self._pipe = self._server_pipe_handle(True)
+
+    def _get_unconnected_pipe(self):
+        # Create new instance and return previous one.  This ensures
+        # that (until the server is closed) there is always at least
+        # one pipe handle for address.  Therefore if a client attempt
+        # to connect it will not fail with FileNotFoundError.
+        tmp, self._pipe = self._pipe, self._server_pipe_handle(False)
+        return tmp
+
+    def _server_pipe_handle(self, first):
+        # Return a wrapper for a new pipe handle.
+        if self.closed():
+            return None
+        flags = _winapi.PIPE_ACCESS_DUPLEX | _winapi.FILE_FLAG_OVERLAPPED
+        if first:
+            flags |= _winapi.FILE_FLAG_FIRST_PIPE_INSTANCE
+        h = _winapi.CreateNamedPipe(
+            self._address, flags,
+            _winapi.PIPE_TYPE_MESSAGE | _winapi.PIPE_READMODE_MESSAGE |
+            _winapi.PIPE_WAIT,
+            _winapi.PIPE_UNLIMITED_INSTANCES,
+            windows_utils.BUFSIZE, windows_utils.BUFSIZE,
+            _winapi.NMPWAIT_WAIT_FOREVER, _winapi.NULL)
+        pipe = windows_utils.PipeHandle(h)
+        self._free_instances.add(pipe)
+        return pipe
+
+    def closed(self):
+        return (self._address is None)
+
+    def close(self):
+        if self._accept_pipe_future is not None:
+            self._accept_pipe_future.cancel()
+            self._accept_pipe_future = None
+        # Close all instances which have not been connected to by a client.
+        if self._address is not None:
+            for pipe in self._free_instances:
+                pipe.close()
+            self._pipe = None
+            self._address = None
+            self._free_instances.clear()
+
+    __del__ = close
+
+
+class _WindowsSelectorEventLoop(selector_events.BaseSelectorEventLoop):
+    """Windows version of selector event loop."""
+
+
+class ProactorEventLoop(proactor_events.BaseProactorEventLoop):
+    """Windows version of proactor event loop using IOCP."""
+
+    def __init__(self, proactor=None):
+        if proactor is None:
+            proactor = IocpProactor()
+        super().__init__(proactor)
+
+    def _run_forever_setup(self):
+        assert self._self_reading_future is None
+        self.call_soon(self._loop_self_reading)
+        super()._run_forever_setup()
+
+    def _run_forever_cleanup(self):
+        super()._run_forever_cleanup()
+        if self._self_reading_future is not None:
+            ov = self._self_reading_future._ov
+            self._self_reading_future.cancel()
+            # self_reading_future always uses IOCP, so even though it's
+            # been cancelled, we need to make sure that the IOCP message
+            # is received so that the kernel is not holding on to the
+            # memory, possibly causing memory corruption later. Only
+            # unregister it if IO is complete in all respects. Otherwise
+            # we need another _poll() later to complete the IO.
+            if ov is not None and not ov.pending:
+                self._proactor._unregister(ov)
+            self._self_reading_future = None
+
+    async def create_pipe_connection(self, protocol_factory, address):
+        f = self._proactor.connect_pipe(address)
+        pipe = await f
+        protocol = protocol_factory()
+        trans = self._make_duplex_pipe_transport(pipe, protocol,
+                                                 extra={'addr': address})
+        return trans, protocol
+
+    async def start_serving_pipe(self, protocol_factory, address):
+        server = PipeServer(address)
+
+        def loop_accept_pipe(f=None):
+            pipe = None
+            try:
+                if f:
+                    pipe = f.result()
+                    server._free_instances.discard(pipe)
+
+                    if server.closed():
+                        # A client connected before the server was closed:
+                        # drop the client (close the pipe) and exit
+                        pipe.close()
+                        return
+
+                    protocol = protocol_factory()
+                    self._make_duplex_pipe_transport(
+                        pipe, protocol, extra={'addr': address})
+
+                pipe = server._get_unconnected_pipe()
+                if pipe is None:
+                    return
+
+                f = self._proactor.accept_pipe(pipe)
+            except BrokenPipeError:
+                if pipe and pipe.fileno() != -1:
+                    pipe.close()
+                self.call_soon(loop_accept_pipe)
+            except OSError as exc:
+                if pipe and pipe.fileno() != -1:
+                    self.call_exception_handler({
+                        'message': 'Pipe accept failed',
+                        'exception': exc,
+                        'pipe': pipe,
+                    })
+                    pipe.close()
+                elif self._debug:
+                    logger.warning("Accept pipe failed on pipe %r",
+                                   pipe, exc_info=True)
+                self.call_soon(loop_accept_pipe)
+            except exceptions.CancelledError:
+                if pipe:
+                    pipe.close()
+            else:
+                server._accept_pipe_future = f
+                f.add_done_callback(loop_accept_pipe)
+
+        self.call_soon(loop_accept_pipe)
+        return [server]
+
+    async def _make_subprocess_transport(self, protocol, args, shell,
+                                         stdin, stdout, stderr, bufsize,
+                                         extra=None, **kwargs):
+        waiter = self.create_future()
+        transp = _WindowsSubprocessTransport(self, protocol, args, shell,
+                                             stdin, stdout, stderr, bufsize,
+                                             waiter=waiter, extra=extra,
+                                             **kwargs)
+        try:
+            await waiter
+        except (SystemExit, KeyboardInterrupt):
+            raise
+        except BaseException:
+            transp.close()
+            await transp._wait()
+            raise
+
+        return transp
+
+
+class IocpProactor:
+    """Proactor implementation using IOCP."""
+
+    def __init__(self, concurrency=INFINITE):
+        self._loop = None
+        self._results = []
+        self._iocp = _overlapped.CreateIoCompletionPort(
+            _overlapped.INVALID_HANDLE_VALUE, NULL, 0, concurrency)
+        self._cache = {}
+        self._registered = weakref.WeakSet()
+        self._unregistered = []
+        self._stopped_serving = weakref.WeakSet()
+
+    def _check_closed(self):
+        if self._iocp is None:
+            raise RuntimeError('IocpProactor is closed')
+
+    def __repr__(self):
+        info = ['overlapped#=%s' % len(self._cache),
+                'result#=%s' % len(self._results)]
+        if self._iocp is None:
+            info.append('closed')
+        return '<%s %s>' % (self.__class__.__name__, " ".join(info))
+
+    def set_loop(self, loop):
+        self._loop = loop
+
+    def select(self, timeout=None):
+        if not self._results:
+            self._poll(timeout)
+        tmp = self._results
+        self._results = []
+        try:
+            return tmp
+        finally:
+            # Needed to break cycles when an exception occurs.
+            tmp = None
+
+    def _result(self, value):
+        fut = self._loop.create_future()
+        fut.set_result(value)
+        return fut
+
+    @staticmethod
+    def finish_socket_func(trans, key, ov):
+        try:
+            return ov.getresult()
+        except OSError as exc:
+            if exc.winerror in (_overlapped.ERROR_NETNAME_DELETED,
+                                _overlapped.ERROR_OPERATION_ABORTED):
+                raise ConnectionResetError(*exc.args)
+            else:
+                raise
+
+    @classmethod
+    def _finish_recvfrom(cls, trans, key, ov, *, empty_result):
+        try:
+            return cls.finish_socket_func(trans, key, ov)
+        except OSError as exc:
+            # WSARecvFrom will report ERROR_PORT_UNREACHABLE when the same
+            # socket is used to send to an address that is not listening.
+            if exc.winerror == _overlapped.ERROR_PORT_UNREACHABLE:
+                return empty_result, None
+            else:
+                raise
+
+    def recv(self, conn, nbytes, flags=0):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+        try:
+            if isinstance(conn, socket.socket):
+                ov.WSARecv(conn.fileno(), nbytes, flags)
+            else:
+                ov.ReadFile(conn.fileno(), nbytes)
+        except BrokenPipeError:
+            return self._result(b'')
+
+        return self._register(ov, conn, self.finish_socket_func)
+
+    def recv_into(self, conn, buf, flags=0):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+        try:
+            if isinstance(conn, socket.socket):
+                ov.WSARecvInto(conn.fileno(), buf, flags)
+            else:
+                ov.ReadFileInto(conn.fileno(), buf)
+        except BrokenPipeError:
+            return self._result(0)
+
+        return self._register(ov, conn, self.finish_socket_func)
+
+    def recvfrom(self, conn, nbytes, flags=0):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+        try:
+            ov.WSARecvFrom(conn.fileno(), nbytes, flags)
+        except BrokenPipeError:
+            return self._result((b'', None))
+
+        return self._register(ov, conn, partial(self._finish_recvfrom,
+                                                empty_result=b''))
+
+    def recvfrom_into(self, conn, buf, flags=0):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+        try:
+            ov.WSARecvFromInto(conn.fileno(), buf, flags)
+        except BrokenPipeError:
+            return self._result((0, None))
+
+        return self._register(ov, conn, partial(self._finish_recvfrom,
+                                                empty_result=0))
+
+    def sendto(self, conn, buf, flags=0, addr=None):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+
+        ov.WSASendTo(conn.fileno(), buf, flags, addr)
+
+        return self._register(ov, conn, self.finish_socket_func)
+
+    def send(self, conn, buf, flags=0):
+        self._register_with_iocp(conn)
+        ov = _overlapped.Overlapped(NULL)
+        if isinstance(conn, socket.socket):
+            ov.WSASend(conn.fileno(), buf, flags)
+        else:
+            ov.WriteFile(conn.fileno(), buf)
+
+        return self._register(ov, conn, self.finish_socket_func)
+
+    def accept(self, listener):
+        self._register_with_iocp(listener)
+        conn = self._get_accept_socket(listener.family)
+        ov = _overlapped.Overlapped(NULL)
+        ov.AcceptEx(listener.fileno(), conn.fileno())
+
+        def finish_accept(trans, key, ov):
+            ov.getresult()
+            # Use SO_UPDATE_ACCEPT_CONTEXT so getsockname() etc work.
+            buf = struct.pack('@P', listener.fileno())
+            conn.setsockopt(socket.SOL_SOCKET,
+                            _overlapped.SO_UPDATE_ACCEPT_CONTEXT, buf)
+            conn.settimeout(listener.gettimeout())
+            return conn, conn.getpeername()
+
+        async def accept_coro(future, conn):
+            # Coroutine closing the accept socket if the future is cancelled
+            try:
+                await future
+            except exceptions.CancelledError:
+                conn.close()
+                raise
+
+        future = self._register(ov, listener, finish_accept)
+        coro = accept_coro(future, conn)
+        tasks.ensure_future(coro, loop=self._loop)
+        return future
+
+    def connect(self, conn, address):
+        if conn.type == socket.SOCK_DGRAM:
+            # WSAConnect will complete immediately for UDP sockets so we don't
+            # need to register any IOCP operation
+            _overlapped.WSAConnect(conn.fileno(), address)
+            fut = self._loop.create_future()
+            fut.set_result(None)
+            return fut
+
+        self._register_with_iocp(conn)
+        # The socket needs to be locally bound before we call ConnectEx().
+        try:
+            _overlapped.BindLocal(conn.fileno(), conn.family)
+        except OSError as e:
+            if e.winerror != errno.WSAEINVAL:
+                raise
+            # Probably already locally bound; check using getsockname().
+            if conn.getsockname()[1] == 0:
+                raise
+        ov = _overlapped.Overlapped(NULL)
+        ov.ConnectEx(conn.fileno(), address)
+
+        def finish_connect(trans, key, ov):
+            ov.getresult()
+            # Use SO_UPDATE_CONNECT_CONTEXT so getsockname() etc work.
+            conn.setsockopt(socket.SOL_SOCKET,
+                            _overlapped.SO_UPDATE_CONNECT_CONTEXT, 0)
+            return conn
+
+        return self._register(ov, conn, finish_connect)
+
+    def sendfile(self, sock, file, offset, count):
+        self._register_with_iocp(sock)
+        ov = _overlapped.Overlapped(NULL)
+        offset_low = offset & 0xffff_ffff
+        offset_high = (offset >> 32) & 0xffff_ffff
+        ov.TransmitFile(sock.fileno(),
+                        msvcrt.get_osfhandle(file.fileno()),
+                        offset_low, offset_high,
+                        count, 0, 0)
+
+        return self._register(ov, sock, self.finish_socket_func)
+
+    def accept_pipe(self, pipe):
+        self._register_with_iocp(pipe)
+        ov = _overlapped.Overlapped(NULL)
+        connected = ov.ConnectNamedPipe(pipe.fileno())
+
+        if connected:
+            # ConnectNamePipe() failed with ERROR_PIPE_CONNECTED which means
+            # that the pipe is connected. There is no need to wait for the
+            # completion of the connection.
+            return self._result(pipe)
+
+        def finish_accept_pipe(trans, key, ov):
+            ov.getresult()
+            return pipe
+
+        return self._register(ov, pipe, finish_accept_pipe)
+
+    async def connect_pipe(self, address):
+        delay = CONNECT_PIPE_INIT_DELAY
+        while True:
+            # Unfortunately there is no way to do an overlapped connect to
+            # a pipe.  Call CreateFile() in a loop until it doesn't fail with
+            # ERROR_PIPE_BUSY.
+            try:
+                handle = _overlapped.ConnectPipe(address)
+                break
+            except OSError as exc:
+                if exc.winerror != _overlapped.ERROR_PIPE_BUSY:
+                    raise
+
+            # ConnectPipe() failed with ERROR_PIPE_BUSY: retry later
+            delay = min(delay * 2, CONNECT_PIPE_MAX_DELAY)
+            await tasks.sleep(delay)
+
+        return windows_utils.PipeHandle(handle)
+
+    def wait_for_handle(self, handle, timeout=None):
+        """Wait for a handle.
+
+        Return a Future object. The result of the future is True if the wait
+        completed, or False if the wait did not complete (on timeout).
+        """
+        return self._wait_for_handle(handle, timeout, False)
+
+    def _wait_cancel(self, event, done_callback):
+        fut = self._wait_for_handle(event, None, True)
+        # add_done_callback() cannot be used because the wait may only complete
+        # in IocpProactor.close(), while the event loop is not running.
+        fut._done_callback = done_callback
+        return fut
+
+    def _wait_for_handle(self, handle, timeout, _is_cancel):
+        self._check_closed()
+
+        if timeout is None:
+            ms = _winapi.INFINITE
+        else:
+            # RegisterWaitForSingleObject() has a resolution of 1 millisecond,
+            # round away from zero to wait *at least* timeout seconds.
+            ms = math.ceil(timeout * 1e3)
+
+        # We only create ov so we can use ov.address as a key for the cache.
+        ov = _overlapped.Overlapped(NULL)
+        wait_handle = _overlapped.RegisterWaitWithQueue(
+            handle, self._iocp, ov.address, ms)
+        if _is_cancel:
+            f = _WaitCancelFuture(ov, handle, wait_handle, loop=self._loop)
+        else:
+            f = _WaitHandleFuture(ov, handle, wait_handle, self,
+                                  loop=self._loop)
+        if f._source_traceback:
+            del f._source_traceback[-1]
+
+        def finish_wait_for_handle(trans, key, ov):
+            # Note that this second wait means that we should only use
+            # this with handles types where a successful wait has no
+            # effect.  So events or processes are all right, but locks
+            # or semaphores are not.  Also note if the handle is
+            # signalled and then quickly reset, then we may return
+            # False even though we have not timed out.
+            return f._poll()
+
+        self._cache[ov.address] = (f, ov, 0, finish_wait_for_handle)
+        return f
+
+    def _register_with_iocp(self, obj):
+        # To get notifications of finished ops on this objects sent to the
+        # completion port, were must register the handle.
+        if obj not in self._registered:
+            self._registered.add(obj)
+            _overlapped.CreateIoCompletionPort(obj.fileno(), self._iocp, 0, 0)
+            # XXX We could also use SetFileCompletionNotificationModes()
+            # to avoid sending notifications to completion port of ops
+            # that succeed immediately.
+
+    def _register(self, ov, obj, callback):
+        self._check_closed()
+
+        # Return a future which will be set with the result of the
+        # operation when it completes.  The future's value is actually
+        # the value returned by callback().
+        f = _OverlappedFuture(ov, loop=self._loop)
+        if f._source_traceback:
+            del f._source_traceback[-1]
+        if not ov.pending:
+            # The operation has completed, so no need to postpone the
+            # work.  We cannot take this short cut if we need the
+            # NumberOfBytes, CompletionKey values returned by
+            # PostQueuedCompletionStatus().
+            try:
+                value = callback(None, None, ov)
+            except OSError as e:
+                f.set_exception(e)
+            else:
+                f.set_result(value)
+            # Even if GetOverlappedResult() was called, we have to wait for the
+            # notification of the completion in GetQueuedCompletionStatus().
+            # Register the overlapped operation to keep a reference to the
+            # OVERLAPPED object, otherwise the memory is freed and Windows may
+            # read uninitialized memory.
+
+        # Register the overlapped operation for later.  Note that
+        # we only store obj to prevent it from being garbage
+        # collected too early.
+        self._cache[ov.address] = (f, ov, obj, callback)
+        return f
+
+    def _unregister(self, ov):
+        """Unregister an overlapped object.
+
+        Call this method when its future has been cancelled. The event can
+        already be signalled (pending in the proactor event queue). It is also
+        safe if the event is never signalled (because it was cancelled).
+        """
+        self._check_closed()
+        self._unregistered.append(ov)
+
+    def _get_accept_socket(self, family):
+        s = socket.socket(family)
+        s.settimeout(0)
+        return s
+
+    def _poll(self, timeout=None):
+        if timeout is None:
+            ms = INFINITE
+        elif timeout < 0:
+            raise ValueError("negative timeout")
+        else:
+            # GetQueuedCompletionStatus() has a resolution of 1 millisecond,
+            # round away from zero to wait *at least* timeout seconds.
+            ms = math.ceil(timeout * 1e3)
+            if ms >= INFINITE:
+                raise ValueError("timeout too big")
+
+        while True:
+            status = _overlapped.GetQueuedCompletionStatus(self._iocp, ms)
+            if status is None:
+                break
+            ms = 0
+
+            err, transferred, key, address = status
+            try:
+                f, ov, obj, callback = self._cache.pop(address)
+            except KeyError:
+                if self._loop.get_debug():
+                    self._loop.call_exception_handler({
+                        'message': ('GetQueuedCompletionStatus() returned an '
+                                    'unexpected event'),
+                        'status': ('err=%s transferred=%s key=%#x address=%#x'
+                                   % (err, transferred, key, address)),
+                    })
+
+                # key is either zero, or it is used to return a pipe
+                # handle which should be closed to avoid a leak.
+                if key not in (0, _overlapped.INVALID_HANDLE_VALUE):
+                    _winapi.CloseHandle(key)
+                continue
+
+            if obj in self._stopped_serving:
+                f.cancel()
+            # Don't call the callback if _register() already read the result or
+            # if the overlapped has been cancelled
+            elif not f.done():
+                try:
+                    value = callback(transferred, key, ov)
+                except OSError as e:
+                    f.set_exception(e)
+                    self._results.append(f)
+                else:
+                    f.set_result(value)
+                    self._results.append(f)
+                finally:
+                    f = None
+
+        # Remove unregistered futures
+        for ov in self._unregistered:
+            self._cache.pop(ov.address, None)
+        self._unregistered.clear()
+
+    def _stop_serving(self, obj):
+        # obj is a socket or pipe handle.  It will be closed in
+        # BaseProactorEventLoop._stop_serving() which will make any
+        # pending operations fail quickly.
+        self._stopped_serving.add(obj)
+
+    def close(self):
+        if self._iocp is None:
+            # already closed
+            return
+
+        # Cancel remaining registered operations.
+        for fut, ov, obj, callback in list(self._cache.values()):
+            if fut.cancelled():
+                # Nothing to do with cancelled futures
+                pass
+            elif isinstance(fut, _WaitCancelFuture):
+                # _WaitCancelFuture must not be cancelled
+                pass
+            else:
+                try:
+                    fut.cancel()
+                except OSError as exc:
+                    if self._loop is not None:
+                        context = {
+                            'message': 'Cancelling a future failed',
+                            'exception': exc,
+                            'future': fut,
+                        }
+                        if fut._source_traceback:
+                            context['source_traceback'] = fut._source_traceback
+                        self._loop.call_exception_handler(context)
+
+        # Wait until all cancelled overlapped complete: don't exit with running
+        # overlapped to prevent a crash. Display progress every second if the
+        # loop is still running.
+        msg_update = 1.0
+        start_time = time.monotonic()
+        next_msg = start_time + msg_update
+        while self._cache:
+            if next_msg <= time.monotonic():
+                logger.debug('%r is running after closing for %.1f seconds',
+                             self, time.monotonic() - start_time)
+                next_msg = time.monotonic() + msg_update
+
+            # handle a few events, or timeout
+            self._poll(msg_update)
+
+        self._results = []
+
+        _winapi.CloseHandle(self._iocp)
+        self._iocp = None
+
+    def __del__(self):
+        self.close()
+
+
+class _WindowsSubprocessTransport(base_subprocess.BaseSubprocessTransport):
+
+    def _start(self, args, shell, stdin, stdout, stderr, bufsize, **kwargs):
+        self._proc = windows_utils.Popen(
+            args, shell=shell, stdin=stdin, stdout=stdout, stderr=stderr,
+            bufsize=bufsize, **kwargs)
+
+        def callback(f):
+            returncode = self._proc.poll()
+            self._process_exited(returncode)
+
+        f = self._loop._proactor.wait_for_handle(int(self._proc._handle))
+        f.add_done_callback(callback)
+
+
+SelectorEventLoop = _WindowsSelectorEventLoop
+
+
+class _WindowsSelectorEventLoopPolicy(events._BaseDefaultEventLoopPolicy):
+    _loop_factory = SelectorEventLoop
+
+
+class _WindowsProactorEventLoopPolicy(events._BaseDefaultEventLoopPolicy):
+    _loop_factory = ProactorEventLoop
+
+
+_DefaultEventLoopPolicy = _WindowsProactorEventLoopPolicy
+EventLoop = ProactorEventLoop
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_utils.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_utils.py
new file mode 100644
index 0000000000000000000000000000000000000000..acd49441131b04252b31c8dbef846fac35800d95
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/asyncio/windows_utils.py
@@ -0,0 +1,180 @@
+"""Various Windows specific bits and pieces."""
+
+import sys
+
+if sys.platform != 'win32':  # pragma: no cover
+    raise ImportError('win32 only')
+
+import _winapi
+import itertools
+import msvcrt
+import os
+import subprocess
+import warnings
+
+
+__all__ = 'pipe', 'Popen', 'PIPE', 'PipeHandle'
+
+
+# Constants/globals
+
+
+BUFSIZE = 8192
+PIPE = subprocess.PIPE
+STDOUT = subprocess.STDOUT
+_mmap_counter = itertools.count()
+_MAX_PIPE_ATTEMPTS = 20
+
+
+# Replacement for os.pipe() using handles instead of fds
+
+
+def pipe(*, duplex=False, overlapped=(True, True), bufsize=BUFSIZE):
+    """Like os.pipe() but with overlapped support and using handles not fds."""
+    if duplex:
+        openmode = _winapi.PIPE_ACCESS_DUPLEX
+        access = _winapi.GENERIC_READ | _winapi.GENERIC_WRITE
+        obsize, ibsize = bufsize, bufsize
+    else:
+        openmode = _winapi.PIPE_ACCESS_INBOUND
+        access = _winapi.GENERIC_WRITE
+        obsize, ibsize = 0, bufsize
+
+    openmode |= _winapi.FILE_FLAG_FIRST_PIPE_INSTANCE
+
+    if overlapped[0]:
+        openmode |= _winapi.FILE_FLAG_OVERLAPPED
+
+    if overlapped[1]:
+        flags_and_attribs = _winapi.FILE_FLAG_OVERLAPPED
+    else:
+        flags_and_attribs = 0
+
+    h1 = h2 = None
+    try:
+        for attempts in itertools.count():
+            address = r'\\.\pipe\python-pipe-{:d}-{:d}-{}'.format(
+                os.getpid(), next(_mmap_counter), os.urandom(8).hex())
+            try:
+                h1 = _winapi.CreateNamedPipe(
+                    address, openmode, _winapi.PIPE_WAIT,
+                    1, obsize, ibsize, _winapi.NMPWAIT_WAIT_FOREVER, _winapi.NULL)
+                break
+            except OSError as e:
+                if attempts >= _MAX_PIPE_ATTEMPTS:
+                    raise
+                if e.winerror not in (_winapi.ERROR_PIPE_BUSY,
+                                      _winapi.ERROR_ACCESS_DENIED):
+                    raise
+
+        h2 = _winapi.CreateFile(
+            address, access, 0, _winapi.NULL, _winapi.OPEN_EXISTING,
+            flags_and_attribs, _winapi.NULL)
+
+        ov = _winapi.ConnectNamedPipe(h1, overlapped=True)
+        ov.GetOverlappedResult(True)
+        return h1, h2
+    except:
+        if h1 is not None:
+            _winapi.CloseHandle(h1)
+        if h2 is not None:
+            _winapi.CloseHandle(h2)
+        raise
+
+
+# Wrapper for a pipe handle
+
+
+class PipeHandle:
+    """Wrapper for an overlapped pipe handle which is vaguely file-object like.
+
+    The IOCP event loop can use these instead of socket objects.
+    """
+    def __init__(self, handle):
+        self._handle = handle
+
+    def __repr__(self):
+        if self._handle is not None:
+            handle = f'handle={self._handle!r}'
+        else:
+            handle = 'closed'
+        return f'<{self.__class__.__name__} {handle}>'
+
+    @property
+    def handle(self):
+        return self._handle
+
+    def fileno(self):
+        if self._handle is None:
+            raise ValueError("I/O operation on closed pipe")
+        return self._handle
+
+    def close(self, *, CloseHandle=_winapi.CloseHandle):
+        if self._handle is not None:
+            CloseHandle(self._handle)
+            self._handle = None
+
+    def __del__(self, _warn=warnings.warn):
+        if self._handle is not None:
+            _warn(f"unclosed {self!r}", ResourceWarning, source=self)
+            self.close()
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, t, v, tb):
+        self.close()
+
+
+# Replacement for subprocess.Popen using overlapped pipe handles
+
+
+class Popen(subprocess.Popen):
+    """Replacement for subprocess.Popen using overlapped pipe handles.
+
+    The stdin, stdout, stderr are None or instances of PipeHandle.
+    """
+    def __init__(self, args, stdin=None, stdout=None, stderr=None, **kwds):
+        assert not kwds.get('universal_newlines')
+        assert kwds.get('bufsize', 0) == 0
+        stdin_rfd = stdout_wfd = stderr_wfd = None
+        stdin_wh = stdout_rh = stderr_rh = None
+        if stdin == PIPE:
+            stdin_rh, stdin_wh = pipe(overlapped=(False, True), duplex=True)
+            stdin_rfd = msvcrt.open_osfhandle(stdin_rh, os.O_RDONLY)
+        else:
+            stdin_rfd = stdin
+        if stdout == PIPE:
+            stdout_rh, stdout_wh = pipe(overlapped=(True, False))
+            stdout_wfd = msvcrt.open_osfhandle(stdout_wh, 0)
+        else:
+            stdout_wfd = stdout
+        if stderr == PIPE:
+            stderr_rh, stderr_wh = pipe(overlapped=(True, False))
+            stderr_wfd = msvcrt.open_osfhandle(stderr_wh, 0)
+        elif stderr == STDOUT:
+            stderr_wfd = stdout_wfd
+        else:
+            stderr_wfd = stderr
+        try:
+            super().__init__(args, stdin=stdin_rfd, stdout=stdout_wfd,
+                             stderr=stderr_wfd, **kwds)
+        except:
+            for h in (stdin_wh, stdout_rh, stderr_rh):
+                if h is not None:
+                    _winapi.CloseHandle(h)
+            raise
+        else:
+            if stdin_wh is not None:
+                self.stdin = PipeHandle(stdin_wh)
+            if stdout_rh is not None:
+                self.stdout = PipeHandle(stdout_rh)
+            if stderr_rh is not None:
+                self.stderr = PipeHandle(stderr_rh)
+        finally:
+            if stdin == PIPE:
+                os.close(stdin_rfd)
+            if stdout == PIPE:
+                os.close(stdout_wfd)
+            if stderr == PIPE:
+                os.close(stderr_wfd)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/collections/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/collections/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..803de0c6792d64365e7c6f6209a5a794b04a122e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/collections/__init__.py
@@ -0,0 +1,1609 @@
+'''This module implements specialized container datatypes providing
+alternatives to Python's general purpose built-in containers, dict,
+list, set, and tuple.
+
+* namedtuple   factory function for creating tuple subclasses with named fields
+* deque        list-like container with fast appends and pops on either end
+* ChainMap     dict-like class for creating a single view of multiple mappings
+* Counter      dict subclass for counting hashable objects
+* OrderedDict  dict subclass that remembers the order entries were added
+* defaultdict  dict subclass that calls a factory function to supply missing values
+* UserDict     wrapper around dictionary objects for easier dict subclassing
+* UserList     wrapper around list objects for easier list subclassing
+* UserString   wrapper around string objects for easier string subclassing
+
+'''
+
+__all__ = [
+    'ChainMap',
+    'Counter',
+    'OrderedDict',
+    'UserDict',
+    'UserList',
+    'UserString',
+    'defaultdict',
+    'deque',
+    'namedtuple',
+]
+
+import _collections_abc
+import sys as _sys
+
+_sys.modules['collections.abc'] = _collections_abc
+abc = _collections_abc
+
+from itertools import chain as _chain
+from itertools import repeat as _repeat
+from itertools import starmap as _starmap
+from keyword import iskeyword as _iskeyword
+from operator import eq as _eq
+from operator import itemgetter as _itemgetter
+from reprlib import recursive_repr as _recursive_repr
+from _weakref import proxy as _proxy
+
+try:
+    from _collections import deque
+except ImportError:
+    pass
+else:
+    _collections_abc.MutableSequence.register(deque)
+
+try:
+    # Expose _deque_iterator to support pickling deque iterators
+    from _collections import _deque_iterator  # noqa: F401
+except ImportError:
+    pass
+
+try:
+    from _collections import defaultdict
+except ImportError:
+    pass
+
+heapq = None  # Lazily imported
+
+
+################################################################################
+### OrderedDict
+################################################################################
+
+class _OrderedDictKeysView(_collections_abc.KeysView):
+
+    def __reversed__(self):
+        yield from reversed(self._mapping)
+
+class _OrderedDictItemsView(_collections_abc.ItemsView):
+
+    def __reversed__(self):
+        for key in reversed(self._mapping):
+            yield (key, self._mapping[key])
+
+class _OrderedDictValuesView(_collections_abc.ValuesView):
+
+    def __reversed__(self):
+        for key in reversed(self._mapping):
+            yield self._mapping[key]
+
+class _Link(object):
+    __slots__ = 'prev', 'next', 'key', '__weakref__'
+
+class OrderedDict(dict):
+    'Dictionary that remembers insertion order'
+    # An inherited dict maps keys to values.
+    # The inherited dict provides __getitem__, __len__, __contains__, and get.
+    # The remaining methods are order-aware.
+    # Big-O running times for all methods are the same as regular dictionaries.
+
+    # The internal self.__map dict maps keys to links in a doubly linked list.
+    # The circular doubly linked list starts and ends with a sentinel element.
+    # The sentinel element never gets deleted (this simplifies the algorithm).
+    # The sentinel is in self.__hardroot with a weakref proxy in self.__root.
+    # The prev links are weakref proxies (to prevent circular references).
+    # Individual links are kept alive by the hard reference in self.__map.
+    # Those hard references disappear when a key is deleted from an OrderedDict.
+
+    def __new__(cls, /, *args, **kwds):
+        "Create the ordered dict object and set up the underlying structures."
+        self = dict.__new__(cls)
+        self.__hardroot = _Link()
+        self.__root = root = _proxy(self.__hardroot)
+        root.prev = root.next = root
+        self.__map = {}
+        return self
+
+    def __init__(self, other=(), /, **kwds):
+        '''Initialize an ordered dictionary.  The signature is the same as
+        regular dictionaries.  Keyword argument order is preserved.
+        '''
+        self.__update(other, **kwds)
+
+    def __setitem__(self, key, value,
+                    dict_setitem=dict.__setitem__, proxy=_proxy, Link=_Link):
+        'od.__setitem__(i, y) <==> od[i]=y'
+        # Setting a new item creates a new link at the end of the linked list,
+        # and the inherited dictionary is updated with the new key/value pair.
+        if key not in self:
+            self.__map[key] = link = Link()
+            root = self.__root
+            last = root.prev
+            link.prev, link.next, link.key = last, root, key
+            last.next = link
+            root.prev = proxy(link)
+        dict_setitem(self, key, value)
+
+    def __delitem__(self, key, dict_delitem=dict.__delitem__):
+        'od.__delitem__(y) <==> del od[y]'
+        # Deleting an existing item uses self.__map to find the link which gets
+        # removed by updating the links in the predecessor and successor nodes.
+        dict_delitem(self, key)
+        link = self.__map.pop(key)
+        link_prev = link.prev
+        link_next = link.next
+        link_prev.next = link_next
+        link_next.prev = link_prev
+        link.prev = None
+        link.next = None
+
+    def __iter__(self):
+        'od.__iter__() <==> iter(od)'
+        # Traverse the linked list in order.
+        root = self.__root
+        curr = root.next
+        while curr is not root:
+            yield curr.key
+            curr = curr.next
+
+    def __reversed__(self):
+        'od.__reversed__() <==> reversed(od)'
+        # Traverse the linked list in reverse order.
+        root = self.__root
+        curr = root.prev
+        while curr is not root:
+            yield curr.key
+            curr = curr.prev
+
+    def clear(self):
+        'od.clear() -> None.  Remove all items from od.'
+        root = self.__root
+        root.prev = root.next = root
+        self.__map.clear()
+        dict.clear(self)
+
+    def popitem(self, last=True):
+        '''Remove and return a (key, value) pair from the dictionary.
+
+        Pairs are returned in LIFO order if last is true or FIFO order if false.
+        '''
+        if not self:
+            raise KeyError('dictionary is empty')
+        root = self.__root
+        if last:
+            link = root.prev
+            link_prev = link.prev
+            link_prev.next = root
+            root.prev = link_prev
+        else:
+            link = root.next
+            link_next = link.next
+            root.next = link_next
+            link_next.prev = root
+        key = link.key
+        del self.__map[key]
+        value = dict.pop(self, key)
+        return key, value
+
+    def move_to_end(self, key, last=True):
+        '''Move an existing element to the end (or beginning if last is false).
+
+        Raise KeyError if the element does not exist.
+        '''
+        link = self.__map[key]
+        link_prev = link.prev
+        link_next = link.next
+        soft_link = link_next.prev
+        link_prev.next = link_next
+        link_next.prev = link_prev
+        root = self.__root
+        if last:
+            last = root.prev
+            link.prev = last
+            link.next = root
+            root.prev = soft_link
+            last.next = link
+        else:
+            first = root.next
+            link.prev = root
+            link.next = first
+            first.prev = soft_link
+            root.next = link
+
+    def __sizeof__(self):
+        sizeof = _sys.getsizeof
+        n = len(self) + 1                       # number of links including root
+        size = sizeof(self.__dict__)            # instance dictionary
+        size += sizeof(self.__map) * 2          # internal dict and inherited dict
+        size += sizeof(self.__hardroot) * n     # link objects
+        size += sizeof(self.__root) * n         # proxy objects
+        return size
+
+    update = __update = _collections_abc.MutableMapping.update
+
+    def keys(self):
+        "D.keys() -> a set-like object providing a view on D's keys"
+        return _OrderedDictKeysView(self)
+
+    def items(self):
+        "D.items() -> a set-like object providing a view on D's items"
+        return _OrderedDictItemsView(self)
+
+    def values(self):
+        "D.values() -> an object providing a view on D's values"
+        return _OrderedDictValuesView(self)
+
+    __ne__ = _collections_abc.MutableMapping.__ne__
+
+    __marker = object()
+
+    def pop(self, key, default=__marker):
+        '''od.pop(k[,d]) -> v, remove specified key and return the corresponding
+        value.  If key is not found, d is returned if given, otherwise KeyError
+        is raised.
+
+        '''
+        marker = self.__marker
+        result = dict.pop(self, key, marker)
+        if result is not marker:
+            # The same as in __delitem__().
+            link = self.__map.pop(key)
+            link_prev = link.prev
+            link_next = link.next
+            link_prev.next = link_next
+            link_next.prev = link_prev
+            link.prev = None
+            link.next = None
+            return result
+        if default is marker:
+            raise KeyError(key)
+        return default
+
+    def setdefault(self, key, default=None):
+        '''Insert key with a value of default if key is not in the dictionary.
+
+        Return the value for key if key is in the dictionary, else default.
+        '''
+        if key in self:
+            return self[key]
+        self[key] = default
+        return default
+
+    @_recursive_repr()
+    def __repr__(self):
+        'od.__repr__() <==> repr(od)'
+        if not self:
+            return '%s()' % (self.__class__.__name__,)
+        return '%s(%r)' % (self.__class__.__name__, dict(self.items()))
+
+    def __reduce__(self):
+        'Return state information for pickling'
+        state = self.__getstate__()
+        if state:
+            if isinstance(state, tuple):
+                state, slots = state
+            else:
+                slots = {}
+            state = state.copy()
+            slots = slots.copy()
+            for k in vars(OrderedDict()):
+                state.pop(k, None)
+                slots.pop(k, None)
+            if slots:
+                state = state, slots
+            else:
+                state = state or None
+        return self.__class__, (), state, None, iter(self.items())
+
+    def copy(self):
+        'od.copy() -> a shallow copy of od'
+        return self.__class__(self)
+
+    @classmethod
+    def fromkeys(cls, iterable, value=None):
+        '''Create a new ordered dictionary with keys from iterable and values set to value.
+        '''
+        self = cls()
+        for key in iterable:
+            self[key] = value
+        return self
+
+    def __eq__(self, other):
+        '''od.__eq__(y) <==> od==y.  Comparison to another OD is order-sensitive
+        while comparison to a regular mapping is order-insensitive.
+
+        '''
+        if isinstance(other, OrderedDict):
+            return dict.__eq__(self, other) and all(map(_eq, self, other))
+        return dict.__eq__(self, other)
+
+    def __ior__(self, other):
+        self.update(other)
+        return self
+
+    def __or__(self, other):
+        if not isinstance(other, dict):
+            return NotImplemented
+        new = self.__class__(self)
+        new.update(other)
+        return new
+
+    def __ror__(self, other):
+        if not isinstance(other, dict):
+            return NotImplemented
+        new = self.__class__(other)
+        new.update(self)
+        return new
+
+
+try:
+    from _collections import OrderedDict
+except ImportError:
+    # Leave the pure Python version in place.
+    pass
+
+
+################################################################################
+### namedtuple
+################################################################################
+
+try:
+    from _collections import _tuplegetter
+except ImportError:
+    _tuplegetter = lambda index, doc: property(_itemgetter(index), doc=doc)
+
+def namedtuple(typename, field_names, *, rename=False, defaults=None, module=None):
+    """Returns a new subclass of tuple with named fields.
+
+    >>> Point = namedtuple('Point', ['x', 'y'])
+    >>> Point.__doc__                   # docstring for the new class
+    'Point(x, y)'
+    >>> p = Point(11, y=22)             # instantiate with positional args or keywords
+    >>> p[0] + p[1]                     # indexable like a plain tuple
+    33
+    >>> x, y = p                        # unpack like a regular tuple
+    >>> x, y
+    (11, 22)
+    >>> p.x + p.y                       # fields also accessible by name
+    33
+    >>> d = p._asdict()                 # convert to a dictionary
+    >>> d['x']
+    11
+    >>> Point(**d)                      # convert from a dictionary
+    Point(x=11, y=22)
+    >>> p._replace(x=100)               # _replace() is like str.replace() but targets named fields
+    Point(x=100, y=22)
+
+    """
+
+    # Validate the field names.  At the user's option, either generate an error
+    # message or automatically replace the field name with a valid name.
+    if isinstance(field_names, str):
+        field_names = field_names.replace(',', ' ').split()
+    field_names = list(map(str, field_names))
+    typename = _sys.intern(str(typename))
+
+    if rename:
+        seen = set()
+        for index, name in enumerate(field_names):
+            if (not name.isidentifier()
+                or _iskeyword(name)
+                or name.startswith('_')
+                or name in seen):
+                field_names[index] = f'_{index}'
+            seen.add(name)
+
+    for name in [typename] + field_names:
+        if type(name) is not str:
+            raise TypeError('Type names and field names must be strings')
+        if not name.isidentifier():
+            raise ValueError('Type names and field names must be valid '
+                             f'identifiers: {name!r}')
+        if _iskeyword(name):
+            raise ValueError('Type names and field names cannot be a '
+                             f'keyword: {name!r}')
+
+    seen = set()
+    for name in field_names:
+        if name.startswith('_') and not rename:
+            raise ValueError('Field names cannot start with an underscore: '
+                             f'{name!r}')
+        if name in seen:
+            raise ValueError(f'Encountered duplicate field name: {name!r}')
+        seen.add(name)
+
+    field_defaults = {}
+    if defaults is not None:
+        defaults = tuple(defaults)
+        if len(defaults) > len(field_names):
+            raise TypeError('Got more default values than field names')
+        field_defaults = dict(reversed(list(zip(reversed(field_names),
+                                                reversed(defaults)))))
+
+    # Variables used in the methods and docstrings
+    field_names = tuple(map(_sys.intern, field_names))
+    num_fields = len(field_names)
+    arg_list = ', '.join(field_names)
+    if num_fields == 1:
+        arg_list += ','
+    repr_fmt = '(' + ', '.join(f'{name}=%r' for name in field_names) + ')'
+    tuple_new = tuple.__new__
+    _dict, _tuple, _len, _map, _zip = dict, tuple, len, map, zip
+
+    # Create all the named tuple methods to be added to the class namespace
+
+    namespace = {
+        '_tuple_new': tuple_new,
+        '__builtins__': {},
+        '__name__': f'namedtuple_{typename}',
+    }
+    code = f'lambda _cls, {arg_list}: _tuple_new(_cls, ({arg_list}))'
+    __new__ = eval(code, namespace)
+    __new__.__name__ = '__new__'
+    __new__.__doc__ = f'Create new instance of {typename}({arg_list})'
+    if defaults is not None:
+        __new__.__defaults__ = defaults
+
+    @classmethod
+    def _make(cls, iterable):
+        result = tuple_new(cls, iterable)
+        if _len(result) != num_fields:
+            raise TypeError(f'Expected {num_fields} arguments, got {len(result)}')
+        return result
+
+    _make.__func__.__doc__ = (f'Make a new {typename} object from a sequence '
+                              'or iterable')
+
+    def _replace(self, /, **kwds):
+        result = self._make(_map(kwds.pop, field_names, self))
+        if kwds:
+            raise TypeError(f'Got unexpected field names: {list(kwds)!r}')
+        return result
+
+    _replace.__doc__ = (f'Return a new {typename} object replacing specified '
+                        'fields with new values')
+
+    def __repr__(self):
+        'Return a nicely formatted representation string'
+        return self.__class__.__name__ + repr_fmt % self
+
+    def _asdict(self):
+        'Return a new dict which maps field names to their values.'
+        return _dict(_zip(self._fields, self))
+
+    def __getnewargs__(self):
+        'Return self as a plain tuple.  Used by copy and pickle.'
+        return _tuple(self)
+
+    # Modify function metadata to help with introspection and debugging
+    for method in (
+        __new__,
+        _make.__func__,
+        _replace,
+        __repr__,
+        _asdict,
+        __getnewargs__,
+    ):
+        method.__qualname__ = f'{typename}.{method.__name__}'
+
+    # Build-up the class namespace dictionary
+    # and use type() to build the result class
+    class_namespace = {
+        '__doc__': f'{typename}({arg_list})',
+        '__slots__': (),
+        '_fields': field_names,
+        '_field_defaults': field_defaults,
+        '__new__': __new__,
+        '_make': _make,
+        '__replace__': _replace,
+        '_replace': _replace,
+        '__repr__': __repr__,
+        '_asdict': _asdict,
+        '__getnewargs__': __getnewargs__,
+        '__match_args__': field_names,
+    }
+    for index, name in enumerate(field_names):
+        doc = _sys.intern(f'Alias for field number {index}')
+        class_namespace[name] = _tuplegetter(index, doc)
+
+    result = type(typename, (tuple,), class_namespace)
+
+    # For pickling to work, the __module__ variable needs to be set to the frame
+    # where the named tuple is created.  Bypass this step in environments where
+    # sys._getframe is not defined (Jython for example) or sys._getframe is not
+    # defined for arguments greater than 0 (IronPython), or where the user has
+    # specified a particular module.
+    if module is None:
+        try:
+            module = _sys._getframemodulename(1) or '__main__'
+        except AttributeError:
+            try:
+                module = _sys._getframe(1).f_globals.get('__name__', '__main__')
+            except (AttributeError, ValueError):
+                pass
+    if module is not None:
+        result.__module__ = module
+
+    return result
+
+
+########################################################################
+###  Counter
+########################################################################
+
+def _count_elements(mapping, iterable):
+    'Tally elements from the iterable.'
+    mapping_get = mapping.get
+    for elem in iterable:
+        mapping[elem] = mapping_get(elem, 0) + 1
+
+try:                                    # Load C helper function if available
+    from _collections import _count_elements
+except ImportError:
+    pass
+
+class Counter(dict):
+    '''Dict subclass for counting hashable items.  Sometimes called a bag
+    or multiset.  Elements are stored as dictionary keys and their counts
+    are stored as dictionary values.
+
+    >>> c = Counter('abcdeabcdabcaba')  # count elements from a string
+
+    >>> c.most_common(3)                # three most common elements
+    [('a', 5), ('b', 4), ('c', 3)]
+    >>> sorted(c)                       # list all unique elements
+    ['a', 'b', 'c', 'd', 'e']
+    >>> ''.join(sorted(c.elements()))   # list elements with repetitions
+    'aaaaabbbbcccdde'
+    >>> sum(c.values())                 # total of all counts
+    15
+
+    >>> c['a']                          # count of letter 'a'
+    5
+    >>> for elem in 'shazam':           # update counts from an iterable
+    ...     c[elem] += 1                # by adding 1 to each element's count
+    >>> c['a']                          # now there are seven 'a'
+    7
+    >>> del c['b']                      # remove all 'b'
+    >>> c['b']                          # now there are zero 'b'
+    0
+
+    >>> d = Counter('simsalabim')       # make another counter
+    >>> c.update(d)                     # add in the second counter
+    >>> c['a']                          # now there are nine 'a'
+    9
+
+    >>> c.clear()                       # empty the counter
+    >>> c
+    Counter()
+
+    Note:  If a count is set to zero or reduced to zero, it will remain
+    in the counter until the entry is deleted or the counter is cleared:
+
+    >>> c = Counter('aaabbc')
+    >>> c['b'] -= 2                     # reduce the count of 'b' by two
+    >>> c.most_common()                 # 'b' is still in, but its count is zero
+    [('a', 3), ('c', 1), ('b', 0)]
+
+    '''
+    # References:
+    #   http://en.wikipedia.org/wiki/Multiset
+    #   http://www.gnu.org/software/smalltalk/manual-base/html_node/Bag.html
+    #   http://www.java2s.com/Tutorial/Cpp/0380__set-multiset/Catalog0380__set-multiset.htm
+    #   http://code.activestate.com/recipes/259174/
+    #   Knuth, TAOCP Vol. II section 4.6.3
+
+    def __init__(self, iterable=None, /, **kwds):
+        '''Create a new, empty Counter object.  And if given, count elements
+        from an input iterable.  Or, initialize the count from another mapping
+        of elements to their counts.
+
+        >>> c = Counter()                           # a new, empty counter
+        >>> c = Counter('gallahad')                 # a new counter from an iterable
+        >>> c = Counter({'a': 4, 'b': 2})           # a new counter from a mapping
+        >>> c = Counter(a=4, b=2)                   # a new counter from keyword args
+
+        '''
+        super().__init__()
+        self.update(iterable, **kwds)
+
+    def __missing__(self, key):
+        'The count of elements not in the Counter is zero.'
+        # Needed so that self[missing_item] does not raise KeyError
+        return 0
+
+    def total(self):
+        'Sum of the counts'
+        return sum(self.values())
+
+    def most_common(self, n=None):
+        '''List the n most common elements and their counts from the most
+        common to the least.  If n is None, then list all element counts.
+
+        >>> Counter('abracadabra').most_common(3)
+        [('a', 5), ('b', 2), ('r', 2)]
+
+        '''
+        # Emulate Bag.sortedByCount from Smalltalk
+        if n is None:
+            return sorted(self.items(), key=_itemgetter(1), reverse=True)
+
+        # Lazy import to speedup Python startup time
+        global heapq
+        if heapq is None:
+            import heapq
+
+        return heapq.nlargest(n, self.items(), key=_itemgetter(1))
+
+    def elements(self):
+        '''Iterator over elements repeating each as many times as its count.
+
+        >>> c = Counter('ABCABC')
+        >>> sorted(c.elements())
+        ['A', 'A', 'B', 'B', 'C', 'C']
+
+        Knuth's example for prime factors of 1836:  2**2 * 3**3 * 17**1
+
+        >>> import math
+        >>> prime_factors = Counter({2: 2, 3: 3, 17: 1})
+        >>> math.prod(prime_factors.elements())
+        1836
+
+        Note, if an element's count has been set to zero or is a negative
+        number, elements() will ignore it.
+
+        '''
+        # Emulate Bag.do from Smalltalk and Multiset.begin from C++.
+        return _chain.from_iterable(_starmap(_repeat, self.items()))
+
+    # Override dict methods where necessary
+
+    @classmethod
+    def fromkeys(cls, iterable, v=None):
+        # There is no equivalent method for counters because the semantics
+        # would be ambiguous in cases such as Counter.fromkeys('aaabbc', v=2).
+        # Initializing counters to zero values isn't necessary because zero
+        # is already the default value for counter lookups.  Initializing
+        # to one is easily accomplished with Counter(set(iterable)).  For
+        # more exotic cases, create a dictionary first using a dictionary
+        # comprehension or dict.fromkeys().
+        raise NotImplementedError(
+            'Counter.fromkeys() is undefined.  Use Counter(iterable) instead.')
+
+    def update(self, iterable=None, /, **kwds):
+        '''Like dict.update() but add counts instead of replacing them.
+
+        Source can be an iterable, a dictionary, or another Counter instance.
+
+        >>> c = Counter('which')
+        >>> c.update('witch')           # add elements from another iterable
+        >>> d = Counter('watch')
+        >>> c.update(d)                 # add elements from another counter
+        >>> c['h']                      # four 'h' in which, witch, and watch
+        4
+
+        '''
+        # The regular dict.update() operation makes no sense here because the
+        # replace behavior results in some of the original untouched counts
+        # being mixed-in with all of the other counts for a mismash that
+        # doesn't have a straight-forward interpretation in most counting
+        # contexts.  Instead, we implement straight-addition.  Both the inputs
+        # and outputs are allowed to contain zero and negative counts.
+
+        if iterable is not None:
+            if isinstance(iterable, _collections_abc.Mapping):
+                if self:
+                    self_get = self.get
+                    for elem, count in iterable.items():
+                        self[elem] = count + self_get(elem, 0)
+                else:
+                    # fast path when counter is empty
+                    super().update(iterable)
+            else:
+                _count_elements(self, iterable)
+        if kwds:
+            self.update(kwds)
+
+    def subtract(self, iterable=None, /, **kwds):
+        '''Like dict.update() but subtracts counts instead of replacing them.
+        Counts can be reduced below zero.  Both the inputs and outputs are
+        allowed to contain zero and negative counts.
+
+        Source can be an iterable, a dictionary, or another Counter instance.
+
+        >>> c = Counter('which')
+        >>> c.subtract('witch')             # subtract elements from another iterable
+        >>> c.subtract(Counter('watch'))    # subtract elements from another counter
+        >>> c['h']                          # 2 in which, minus 1 in witch, minus 1 in watch
+        0
+        >>> c['w']                          # 1 in which, minus 1 in witch, minus 1 in watch
+        -1
+
+        '''
+        if iterable is not None:
+            self_get = self.get
+            if isinstance(iterable, _collections_abc.Mapping):
+                for elem, count in iterable.items():
+                    self[elem] = self_get(elem, 0) - count
+            else:
+                for elem in iterable:
+                    self[elem] = self_get(elem, 0) - 1
+        if kwds:
+            self.subtract(kwds)
+
+    def copy(self):
+        'Return a shallow copy.'
+        return self.__class__(self)
+
+    def __reduce__(self):
+        return self.__class__, (dict(self),)
+
+    def __delitem__(self, elem):
+        'Like dict.__delitem__() but does not raise KeyError for missing values.'
+        if elem in self:
+            super().__delitem__(elem)
+
+    def __repr__(self):
+        if not self:
+            return f'{self.__class__.__name__}()'
+        try:
+            # dict() preserves the ordering returned by most_common()
+            d = dict(self.most_common())
+        except TypeError:
+            # handle case where values are not orderable
+            d = dict(self)
+        return f'{self.__class__.__name__}({d!r})'
+
+    # Multiset-style mathematical operations discussed in:
+    #       Knuth TAOCP Volume II section 4.6.3 exercise 19
+    #       and at http://en.wikipedia.org/wiki/Multiset
+    #
+    # Outputs guaranteed to only include positive counts.
+    #
+    # To strip negative and zero counts, add-in an empty counter:
+    #       c += Counter()
+    #
+    # Results are ordered according to when an element is first
+    # encountered in the left operand and then by the order
+    # encountered in the right operand.
+    #
+    # When the multiplicities are all zero or one, multiset operations
+    # are guaranteed to be equivalent to the corresponding operations
+    # for regular sets.
+    #     Given counter multisets such as:
+    #         cp = Counter(a=1, b=0, c=1)
+    #         cq = Counter(c=1, d=0, e=1)
+    #     The corresponding regular sets would be:
+    #         sp = {'a', 'c'}
+    #         sq = {'c', 'e'}
+    #     All of the following relations would hold:
+    #         set(cp + cq) == sp | sq
+    #         set(cp - cq) == sp - sq
+    #         set(cp | cq) == sp | sq
+    #         set(cp & cq) == sp & sq
+    #         (cp == cq) == (sp == sq)
+    #         (cp != cq) == (sp != sq)
+    #         (cp <= cq) == (sp <= sq)
+    #         (cp < cq) == (sp < sq)
+    #         (cp >= cq) == (sp >= sq)
+    #         (cp > cq) == (sp > sq)
+
+    def __eq__(self, other):
+        'True if all counts agree. Missing counts are treated as zero.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return all(self[e] == other[e] for c in (self, other) for e in c)
+
+    def __ne__(self, other):
+        'True if any counts disagree. Missing counts are treated as zero.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return not self == other
+
+    def __le__(self, other):
+        'True if all counts in self are a subset of those in other.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return all(self[e] <= other[e] for c in (self, other) for e in c)
+
+    def __lt__(self, other):
+        'True if all counts in self are a proper subset of those in other.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return self <= other and self != other
+
+    def __ge__(self, other):
+        'True if all counts in self are a superset of those in other.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return all(self[e] >= other[e] for c in (self, other) for e in c)
+
+    def __gt__(self, other):
+        'True if all counts in self are a proper superset of those in other.'
+        if not isinstance(other, Counter):
+            return NotImplemented
+        return self >= other and self != other
+
+    def __add__(self, other):
+        '''Add counts from two counters.
+
+        >>> Counter('abbb') + Counter('bcc')
+        Counter({'b': 4, 'c': 2, 'a': 1})
+
+        '''
+        if not isinstance(other, Counter):
+            return NotImplemented
+        result = Counter()
+        for elem, count in self.items():
+            newcount = count + other[elem]
+            if newcount > 0:
+                result[elem] = newcount
+        for elem, count in other.items():
+            if elem not in self and count > 0:
+                result[elem] = count
+        return result
+
+    def __sub__(self, other):
+        ''' Subtract count, but keep only results with positive counts.
+
+        >>> Counter('abbbc') - Counter('bccd')
+        Counter({'b': 2, 'a': 1})
+
+        '''
+        if not isinstance(other, Counter):
+            return NotImplemented
+        result = Counter()
+        for elem, count in self.items():
+            newcount = count - other[elem]
+            if newcount > 0:
+                result[elem] = newcount
+        for elem, count in other.items():
+            if elem not in self and count < 0:
+                result[elem] = 0 - count
+        return result
+
+    def __or__(self, other):
+        '''Union is the maximum of value in either of the input counters.
+
+        >>> Counter('abbb') | Counter('bcc')
+        Counter({'b': 3, 'c': 2, 'a': 1})
+
+        '''
+        if not isinstance(other, Counter):
+            return NotImplemented
+        result = Counter()
+        for elem, count in self.items():
+            other_count = other[elem]
+            newcount = other_count if count < other_count else count
+            if newcount > 0:
+                result[elem] = newcount
+        for elem, count in other.items():
+            if elem not in self and count > 0:
+                result[elem] = count
+        return result
+
+    def __and__(self, other):
+        ''' Intersection is the minimum of corresponding counts.
+
+        >>> Counter('abbb') & Counter('bcc')
+        Counter({'b': 1})
+
+        '''
+        if not isinstance(other, Counter):
+            return NotImplemented
+        result = Counter()
+        for elem, count in self.items():
+            other_count = other[elem]
+            newcount = count if count < other_count else other_count
+            if newcount > 0:
+                result[elem] = newcount
+        return result
+
+    def __pos__(self):
+        'Adds an empty counter, effectively stripping negative and zero counts'
+        result = Counter()
+        for elem, count in self.items():
+            if count > 0:
+                result[elem] = count
+        return result
+
+    def __neg__(self):
+        '''Subtracts from an empty counter.  Strips positive and zero counts,
+        and flips the sign on negative counts.
+
+        '''
+        result = Counter()
+        for elem, count in self.items():
+            if count < 0:
+                result[elem] = 0 - count
+        return result
+
+    def _keep_positive(self):
+        '''Internal method to strip elements with a negative or zero count'''
+        nonpositive = [elem for elem, count in self.items() if not count > 0]
+        for elem in nonpositive:
+            del self[elem]
+        return self
+
+    def __iadd__(self, other):
+        '''Inplace add from another counter, keeping only positive counts.
+
+        >>> c = Counter('abbb')
+        >>> c += Counter('bcc')
+        >>> c
+        Counter({'b': 4, 'c': 2, 'a': 1})
+
+        '''
+        for elem, count in other.items():
+            self[elem] += count
+        return self._keep_positive()
+
+    def __isub__(self, other):
+        '''Inplace subtract counter, but keep only results with positive counts.
+
+        >>> c = Counter('abbbc')
+        >>> c -= Counter('bccd')
+        >>> c
+        Counter({'b': 2, 'a': 1})
+
+        '''
+        for elem, count in other.items():
+            self[elem] -= count
+        return self._keep_positive()
+
+    def __ior__(self, other):
+        '''Inplace union is the maximum of value from either counter.
+
+        >>> c = Counter('abbb')
+        >>> c |= Counter('bcc')
+        >>> c
+        Counter({'b': 3, 'c': 2, 'a': 1})
+
+        '''
+        for elem, other_count in other.items():
+            count = self[elem]
+            if other_count > count:
+                self[elem] = other_count
+        return self._keep_positive()
+
+    def __iand__(self, other):
+        '''Inplace intersection is the minimum of corresponding counts.
+
+        >>> c = Counter('abbb')
+        >>> c &= Counter('bcc')
+        >>> c
+        Counter({'b': 1})
+
+        '''
+        for elem, count in self.items():
+            other_count = other[elem]
+            if other_count < count:
+                self[elem] = other_count
+        return self._keep_positive()
+
+
+########################################################################
+###  ChainMap
+########################################################################
+
+class ChainMap(_collections_abc.MutableMapping):
+    ''' A ChainMap groups multiple dicts (or other mappings) together
+    to create a single, updateable view.
+
+    The underlying mappings are stored in a list.  That list is public and can
+    be accessed or updated using the *maps* attribute.  There is no other
+    state.
+
+    Lookups search the underlying mappings successively until a key is found.
+    In contrast, writes, updates, and deletions only operate on the first
+    mapping.
+
+    '''
+
+    def __init__(self, *maps):
+        '''Initialize a ChainMap by setting *maps* to the given mappings.
+        If no mappings are provided, a single empty dictionary is used.
+
+        '''
+        self.maps = list(maps) or [{}]          # always at least one map
+
+    def __missing__(self, key):
+        raise KeyError(key)
+
+    def __getitem__(self, key):
+        for mapping in self.maps:
+            try:
+                return mapping[key]             # can't use 'key in mapping' with defaultdict
+            except KeyError:
+                pass
+        return self.__missing__(key)            # support subclasses that define __missing__
+
+    def get(self, key, default=None):
+        return self[key] if key in self else default    # needs to make use of __contains__
+
+    def __len__(self):
+        return len(set().union(*self.maps))     # reuses stored hash values if possible
+
+    def __iter__(self):
+        d = {}
+        for mapping in map(dict.fromkeys, reversed(self.maps)):
+            d |= mapping                        # reuses stored hash values if possible
+        return iter(d)
+
+    def __contains__(self, key):
+        for mapping in self.maps:
+            if key in mapping:
+                return True
+        return False
+
+    def __bool__(self):
+        return any(self.maps)
+
+    @_recursive_repr()
+    def __repr__(self):
+        return f'{self.__class__.__name__}({", ".join(map(repr, self.maps))})'
+
+    @classmethod
+    def fromkeys(cls, iterable, value=None, /):
+        'Create a new ChainMap with keys from iterable and values set to value.'
+        return cls(dict.fromkeys(iterable, value))
+
+    def copy(self):
+        'New ChainMap or subclass with a new copy of maps[0] and refs to maps[1:]'
+        return self.__class__(self.maps[0].copy(), *self.maps[1:])
+
+    __copy__ = copy
+
+    def new_child(self, m=None, **kwargs):      # like Django's Context.push()
+        '''New ChainMap with a new map followed by all previous maps.
+        If no map is provided, an empty dict is used.
+        Keyword arguments update the map or new empty dict.
+        '''
+        if m is None:
+            m = kwargs
+        elif kwargs:
+            m.update(kwargs)
+        return self.__class__(m, *self.maps)
+
+    @property
+    def parents(self):                          # like Django's Context.pop()
+        'New ChainMap from maps[1:].'
+        return self.__class__(*self.maps[1:])
+
+    def __setitem__(self, key, value):
+        self.maps[0][key] = value
+
+    def __delitem__(self, key):
+        try:
+            del self.maps[0][key]
+        except KeyError:
+            raise KeyError(f'Key not found in the first mapping: {key!r}')
+
+    def popitem(self):
+        'Remove and return an item pair from maps[0]. Raise KeyError is maps[0] is empty.'
+        try:
+            return self.maps[0].popitem()
+        except KeyError:
+            raise KeyError('No keys found in the first mapping.')
+
+    def pop(self, key, *args):
+        'Remove *key* from maps[0] and return its value. Raise KeyError if *key* not in maps[0].'
+        try:
+            return self.maps[0].pop(key, *args)
+        except KeyError:
+            raise KeyError(f'Key not found in the first mapping: {key!r}')
+
+    def clear(self):
+        'Clear maps[0], leaving maps[1:] intact.'
+        self.maps[0].clear()
+
+    def __ior__(self, other):
+        self.maps[0].update(other)
+        return self
+
+    def __or__(self, other):
+        if not isinstance(other, _collections_abc.Mapping):
+            return NotImplemented
+        m = self.copy()
+        m.maps[0].update(other)
+        return m
+
+    def __ror__(self, other):
+        if not isinstance(other, _collections_abc.Mapping):
+            return NotImplemented
+        m = dict(other)
+        for child in reversed(self.maps):
+            m.update(child)
+        return self.__class__(m)
+
+
+################################################################################
+### UserDict
+################################################################################
+
+class UserDict(_collections_abc.MutableMapping):
+
+    # Start by filling-out the abstract methods
+    def __init__(self, dict=None, /, **kwargs):
+        self.data = {}
+        if dict is not None:
+            self.update(dict)
+        if kwargs:
+            self.update(kwargs)
+
+    def __len__(self):
+        return len(self.data)
+
+    def __getitem__(self, key):
+        if key in self.data:
+            return self.data[key]
+        if hasattr(self.__class__, "__missing__"):
+            return self.__class__.__missing__(self, key)
+        raise KeyError(key)
+
+    def __setitem__(self, key, item):
+        self.data[key] = item
+
+    def __delitem__(self, key):
+        del self.data[key]
+
+    def __iter__(self):
+        return iter(self.data)
+
+    # Modify __contains__ and get() to work like dict
+    # does when __missing__ is present.
+    def __contains__(self, key):
+        return key in self.data
+
+    def get(self, key, default=None):
+        if key in self:
+            return self[key]
+        return default
+
+
+    # Now, add the methods in dicts but not in MutableMapping
+    def __repr__(self):
+        return repr(self.data)
+
+    def __or__(self, other):
+        if isinstance(other, UserDict):
+            return self.__class__(self.data | other.data)
+        if isinstance(other, dict):
+            return self.__class__(self.data | other)
+        return NotImplemented
+
+    def __ror__(self, other):
+        if isinstance(other, UserDict):
+            return self.__class__(other.data | self.data)
+        if isinstance(other, dict):
+            return self.__class__(other | self.data)
+        return NotImplemented
+
+    def __ior__(self, other):
+        if isinstance(other, UserDict):
+            self.data |= other.data
+        else:
+            self.data |= other
+        return self
+
+    def __copy__(self):
+        inst = self.__class__.__new__(self.__class__)
+        inst.__dict__.update(self.__dict__)
+        # Create a copy and avoid triggering descriptors
+        inst.__dict__["data"] = self.__dict__["data"].copy()
+        return inst
+
+    def copy(self):
+        if self.__class__ is UserDict:
+            return UserDict(self.data.copy())
+        import copy
+        data = self.data
+        try:
+            self.data = {}
+            c = copy.copy(self)
+        finally:
+            self.data = data
+        c.update(self)
+        return c
+
+    @classmethod
+    def fromkeys(cls, iterable, value=None):
+        d = cls()
+        for key in iterable:
+            d[key] = value
+        return d
+
+
+################################################################################
+### UserList
+################################################################################
+
+class UserList(_collections_abc.MutableSequence):
+    """A more or less complete user-defined wrapper around list objects."""
+
+    def __init__(self, initlist=None):
+        self.data = []
+        if initlist is not None:
+            # XXX should this accept an arbitrary sequence?
+            if type(initlist) == type(self.data):
+                self.data[:] = initlist
+            elif isinstance(initlist, UserList):
+                self.data[:] = initlist.data[:]
+            else:
+                self.data = list(initlist)
+
+    def __repr__(self):
+        return repr(self.data)
+
+    def __lt__(self, other):
+        return self.data < self.__cast(other)
+
+    def __le__(self, other):
+        return self.data <= self.__cast(other)
+
+    def __eq__(self, other):
+        return self.data == self.__cast(other)
+
+    def __gt__(self, other):
+        return self.data > self.__cast(other)
+
+    def __ge__(self, other):
+        return self.data >= self.__cast(other)
+
+    def __cast(self, other):
+        return other.data if isinstance(other, UserList) else other
+
+    def __contains__(self, item):
+        return item in self.data
+
+    def __len__(self):
+        return len(self.data)
+
+    def __getitem__(self, i):
+        if isinstance(i, slice):
+            return self.__class__(self.data[i])
+        else:
+            return self.data[i]
+
+    def __setitem__(self, i, item):
+        self.data[i] = item
+
+    def __delitem__(self, i):
+        del self.data[i]
+
+    def __add__(self, other):
+        if isinstance(other, UserList):
+            return self.__class__(self.data + other.data)
+        elif isinstance(other, type(self.data)):
+            return self.__class__(self.data + other)
+        return self.__class__(self.data + list(other))
+
+    def __radd__(self, other):
+        if isinstance(other, UserList):
+            return self.__class__(other.data + self.data)
+        elif isinstance(other, type(self.data)):
+            return self.__class__(other + self.data)
+        return self.__class__(list(other) + self.data)
+
+    def __iadd__(self, other):
+        if isinstance(other, UserList):
+            self.data += other.data
+        elif isinstance(other, type(self.data)):
+            self.data += other
+        else:
+            self.data += list(other)
+        return self
+
+    def __mul__(self, n):
+        return self.__class__(self.data * n)
+
+    __rmul__ = __mul__
+
+    def __imul__(self, n):
+        self.data *= n
+        return self
+
+    def __copy__(self):
+        inst = self.__class__.__new__(self.__class__)
+        inst.__dict__.update(self.__dict__)
+        # Create a copy and avoid triggering descriptors
+        inst.__dict__["data"] = self.__dict__["data"][:]
+        return inst
+
+    def append(self, item):
+        self.data.append(item)
+
+    def insert(self, i, item):
+        self.data.insert(i, item)
+
+    def pop(self, i=-1):
+        return self.data.pop(i)
+
+    def remove(self, item):
+        self.data.remove(item)
+
+    def clear(self):
+        self.data.clear()
+
+    def copy(self):
+        return self.__class__(self)
+
+    def count(self, item):
+        return self.data.count(item)
+
+    def index(self, item, *args):
+        return self.data.index(item, *args)
+
+    def reverse(self):
+        self.data.reverse()
+
+    def sort(self, /, *args, **kwds):
+        self.data.sort(*args, **kwds)
+
+    def extend(self, other):
+        if isinstance(other, UserList):
+            self.data.extend(other.data)
+        else:
+            self.data.extend(other)
+
+
+################################################################################
+### UserString
+################################################################################
+
+class UserString(_collections_abc.Sequence):
+
+    def __init__(self, seq):
+        if isinstance(seq, str):
+            self.data = seq
+        elif isinstance(seq, UserString):
+            self.data = seq.data[:]
+        else:
+            self.data = str(seq)
+
+    def __str__(self):
+        return str(self.data)
+
+    def __repr__(self):
+        return repr(self.data)
+
+    def __int__(self):
+        return int(self.data)
+
+    def __float__(self):
+        return float(self.data)
+
+    def __complex__(self):
+        return complex(self.data)
+
+    def __hash__(self):
+        return hash(self.data)
+
+    def __getnewargs__(self):
+        return (self.data[:],)
+
+    def __eq__(self, string):
+        if isinstance(string, UserString):
+            return self.data == string.data
+        return self.data == string
+
+    def __lt__(self, string):
+        if isinstance(string, UserString):
+            return self.data < string.data
+        return self.data < string
+
+    def __le__(self, string):
+        if isinstance(string, UserString):
+            return self.data <= string.data
+        return self.data <= string
+
+    def __gt__(self, string):
+        if isinstance(string, UserString):
+            return self.data > string.data
+        return self.data > string
+
+    def __ge__(self, string):
+        if isinstance(string, UserString):
+            return self.data >= string.data
+        return self.data >= string
+
+    def __contains__(self, char):
+        if isinstance(char, UserString):
+            char = char.data
+        return char in self.data
+
+    def __len__(self):
+        return len(self.data)
+
+    def __getitem__(self, index):
+        return self.__class__(self.data[index])
+
+    def __add__(self, other):
+        if isinstance(other, UserString):
+            return self.__class__(self.data + other.data)
+        elif isinstance(other, str):
+            return self.__class__(self.data + other)
+        return self.__class__(self.data + str(other))
+
+    def __radd__(self, other):
+        if isinstance(other, str):
+            return self.__class__(other + self.data)
+        return self.__class__(str(other) + self.data)
+
+    def __mul__(self, n):
+        return self.__class__(self.data * n)
+
+    __rmul__ = __mul__
+
+    def __mod__(self, args):
+        return self.__class__(self.data % args)
+
+    def __rmod__(self, template):
+        return self.__class__(str(template) % self)
+
+    # the following methods are defined in alphabetical order:
+    def capitalize(self):
+        return self.__class__(self.data.capitalize())
+
+    def casefold(self):
+        return self.__class__(self.data.casefold())
+
+    def center(self, width, *args):
+        return self.__class__(self.data.center(width, *args))
+
+    def count(self, sub, start=0, end=_sys.maxsize):
+        if isinstance(sub, UserString):
+            sub = sub.data
+        return self.data.count(sub, start, end)
+
+    def removeprefix(self, prefix, /):
+        if isinstance(prefix, UserString):
+            prefix = prefix.data
+        return self.__class__(self.data.removeprefix(prefix))
+
+    def removesuffix(self, suffix, /):
+        if isinstance(suffix, UserString):
+            suffix = suffix.data
+        return self.__class__(self.data.removesuffix(suffix))
+
+    def encode(self, encoding='utf-8', errors='strict'):
+        encoding = 'utf-8' if encoding is None else encoding
+        errors = 'strict' if errors is None else errors
+        return self.data.encode(encoding, errors)
+
+    def endswith(self, suffix, start=0, end=_sys.maxsize):
+        return self.data.endswith(suffix, start, end)
+
+    def expandtabs(self, tabsize=8):
+        return self.__class__(self.data.expandtabs(tabsize))
+
+    def find(self, sub, start=0, end=_sys.maxsize):
+        if isinstance(sub, UserString):
+            sub = sub.data
+        return self.data.find(sub, start, end)
+
+    def format(self, /, *args, **kwds):
+        return self.data.format(*args, **kwds)
+
+    def format_map(self, mapping):
+        return self.data.format_map(mapping)
+
+    def index(self, sub, start=0, end=_sys.maxsize):
+        if isinstance(sub, UserString):
+            sub = sub.data
+        return self.data.index(sub, start, end)
+
+    def isalpha(self):
+        return self.data.isalpha()
+
+    def isalnum(self):
+        return self.data.isalnum()
+
+    def isascii(self):
+        return self.data.isascii()
+
+    def isdecimal(self):
+        return self.data.isdecimal()
+
+    def isdigit(self):
+        return self.data.isdigit()
+
+    def isidentifier(self):
+        return self.data.isidentifier()
+
+    def islower(self):
+        return self.data.islower()
+
+    def isnumeric(self):
+        return self.data.isnumeric()
+
+    def isprintable(self):
+        return self.data.isprintable()
+
+    def isspace(self):
+        return self.data.isspace()
+
+    def istitle(self):
+        return self.data.istitle()
+
+    def isupper(self):
+        return self.data.isupper()
+
+    def join(self, seq):
+        return self.data.join(seq)
+
+    def ljust(self, width, *args):
+        return self.__class__(self.data.ljust(width, *args))
+
+    def lower(self):
+        return self.__class__(self.data.lower())
+
+    def lstrip(self, chars=None):
+        return self.__class__(self.data.lstrip(chars))
+
+    maketrans = str.maketrans
+
+    def partition(self, sep):
+        return self.data.partition(sep)
+
+    def replace(self, old, new, maxsplit=-1):
+        if isinstance(old, UserString):
+            old = old.data
+        if isinstance(new, UserString):
+            new = new.data
+        return self.__class__(self.data.replace(old, new, maxsplit))
+
+    def rfind(self, sub, start=0, end=_sys.maxsize):
+        if isinstance(sub, UserString):
+            sub = sub.data
+        return self.data.rfind(sub, start, end)
+
+    def rindex(self, sub, start=0, end=_sys.maxsize):
+        if isinstance(sub, UserString):
+            sub = sub.data
+        return self.data.rindex(sub, start, end)
+
+    def rjust(self, width, *args):
+        return self.__class__(self.data.rjust(width, *args))
+
+    def rpartition(self, sep):
+        return self.data.rpartition(sep)
+
+    def rstrip(self, chars=None):
+        return self.__class__(self.data.rstrip(chars))
+
+    def split(self, sep=None, maxsplit=-1):
+        return self.data.split(sep, maxsplit)
+
+    def rsplit(self, sep=None, maxsplit=-1):
+        return self.data.rsplit(sep, maxsplit)
+
+    def splitlines(self, keepends=False):
+        return self.data.splitlines(keepends)
+
+    def startswith(self, prefix, start=0, end=_sys.maxsize):
+        return self.data.startswith(prefix, start, end)
+
+    def strip(self, chars=None):
+        return self.__class__(self.data.strip(chars))
+
+    def swapcase(self):
+        return self.__class__(self.data.swapcase())
+
+    def title(self):
+        return self.__class__(self.data.title())
+
+    def translate(self, *args):
+        return self.__class__(self.data.translate(*args))
+
+    def upper(self):
+        return self.__class__(self.data.upper())
+
+    def zfill(self, width):
+        return self.__class__(self.data.zfill(width))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/bz2.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/bz2.py
new file mode 100644
index 0000000000000000000000000000000000000000..16815d6cd20e5b4e8e8f4092e9f84b9b7f66c837
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/bz2.py
@@ -0,0 +1,5 @@
+import bz2
+__doc__ = bz2.__doc__
+del bz2
+
+from bz2 import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/gzip.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/gzip.py
new file mode 100644
index 0000000000000000000000000000000000000000..552f48f948ae479efe01767ceaa6ae79d09e68df
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/gzip.py
@@ -0,0 +1,5 @@
+import gzip
+__doc__ = gzip.__doc__
+del gzip
+
+from gzip import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/lzma.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/lzma.py
new file mode 100644
index 0000000000000000000000000000000000000000..b4bc7ccb1db3cfb401f2bc58c6d26b5b68ab5c16
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/lzma.py
@@ -0,0 +1,5 @@
+import lzma
+__doc__ = lzma.__doc__
+del lzma
+
+from lzma import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/zlib.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/zlib.py
new file mode 100644
index 0000000000000000000000000000000000000000..3aa7e2db90e8623c943e681064411648399340d5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/compression/zlib.py
@@ -0,0 +1,5 @@
+import zlib
+__doc__ = zlib.__doc__
+del zlib
+
+from zlib import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/concurrent/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/concurrent/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..196d3788575993eb403588b01ac6b0a3fbba13da
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/concurrent/__init__.py
@@ -0,0 +1 @@
+# This directory is a Python package.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..7223fc499773aa607c5855d23664fa3695688dff
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/__init__.py
@@ -0,0 +1,683 @@
+"""create and manipulate C data types in Python"""
+
+import os as _os
+import sys as _sys
+import sysconfig as _sysconfig
+import types as _types
+
+__version__ = "1.1.0"
+
+from _ctypes import Union, Structure, Array
+from _ctypes import _Pointer
+from _ctypes import CFuncPtr as _CFuncPtr
+from _ctypes import __version__ as _ctypes_version
+from _ctypes import RTLD_LOCAL, RTLD_GLOBAL
+from _ctypes import ArgumentError
+from _ctypes import SIZEOF_TIME_T
+from _ctypes import CField
+
+from struct import calcsize as _calcsize
+
+if __version__ != _ctypes_version:
+    raise Exception("Version number mismatch", __version__, _ctypes_version)
+
+if _os.name == "nt":
+    from _ctypes import COMError, CopyComPointer, FormatError
+
+DEFAULT_MODE = RTLD_LOCAL
+if _os.name == "posix" and _sys.platform == "darwin":
+    # On OS X 10.3, we use RTLD_GLOBAL as default mode
+    # because RTLD_LOCAL does not work at least on some
+    # libraries.  OS X 10.3 is Darwin 7, so we check for
+    # that.
+
+    if int(_os.uname().release.split('.')[0]) < 8:
+        DEFAULT_MODE = RTLD_GLOBAL
+
+from _ctypes import FUNCFLAG_CDECL as _FUNCFLAG_CDECL, \
+     FUNCFLAG_PYTHONAPI as _FUNCFLAG_PYTHONAPI, \
+     FUNCFLAG_USE_ERRNO as _FUNCFLAG_USE_ERRNO, \
+     FUNCFLAG_USE_LASTERROR as _FUNCFLAG_USE_LASTERROR
+
+# WINOLEAPI -> HRESULT
+# WINOLEAPI_(type)
+#
+# STDMETHODCALLTYPE
+#
+# STDMETHOD(name)
+# STDMETHOD_(type, name)
+#
+# STDAPICALLTYPE
+
+def create_string_buffer(init, size=None):
+    """create_string_buffer(aBytes) -> character array
+    create_string_buffer(anInteger) -> character array
+    create_string_buffer(aBytes, anInteger) -> character array
+    """
+    if isinstance(init, bytes):
+        if size is None:
+            size = len(init)+1
+        _sys.audit("ctypes.create_string_buffer", init, size)
+        buftype = c_char * size
+        buf = buftype()
+        buf.value = init
+        return buf
+    elif isinstance(init, int):
+        _sys.audit("ctypes.create_string_buffer", None, init)
+        buftype = c_char * init
+        buf = buftype()
+        return buf
+    raise TypeError(init)
+
+# Alias to create_string_buffer() for backward compatibility
+c_buffer = create_string_buffer
+
+_c_functype_cache = {}
+def CFUNCTYPE(restype, *argtypes, **kw):
+    """CFUNCTYPE(restype, *argtypes,
+                 use_errno=False, use_last_error=False) -> function prototype.
+
+    restype: the result type
+    argtypes: a sequence specifying the argument types
+
+    The function prototype can be called in different ways to create a
+    callable object:
+
+    prototype(integer address) -> foreign function
+    prototype(callable) -> create and return a C callable function from callable
+    prototype(integer index, method name[, paramflags]) -> foreign function calling a COM method
+    prototype((ordinal number, dll object)[, paramflags]) -> foreign function exported by ordinal
+    prototype((function name, dll object)[, paramflags]) -> foreign function exported by name
+    """
+    flags = _FUNCFLAG_CDECL
+    if kw.pop("use_errno", False):
+        flags |= _FUNCFLAG_USE_ERRNO
+    if kw.pop("use_last_error", False):
+        flags |= _FUNCFLAG_USE_LASTERROR
+    if kw:
+        raise ValueError("unexpected keyword argument(s) %s" % kw.keys())
+
+    try:
+        return _c_functype_cache[(restype, argtypes, flags)]
+    except KeyError:
+        pass
+
+    class CFunctionType(_CFuncPtr):
+        _argtypes_ = argtypes
+        _restype_ = restype
+        _flags_ = flags
+    _c_functype_cache[(restype, argtypes, flags)] = CFunctionType
+    return CFunctionType
+
+if _os.name == "nt":
+    from _ctypes import LoadLibrary as _LoadLibrary
+    from _ctypes import FUNCFLAG_STDCALL as _FUNCFLAG_STDCALL
+
+    _win_functype_cache = {}
+    def WINFUNCTYPE(restype, *argtypes, **kw):
+        # docstring set later (very similar to CFUNCTYPE.__doc__)
+        flags = _FUNCFLAG_STDCALL
+        if kw.pop("use_errno", False):
+            flags |= _FUNCFLAG_USE_ERRNO
+        if kw.pop("use_last_error", False):
+            flags |= _FUNCFLAG_USE_LASTERROR
+        if kw:
+            raise ValueError("unexpected keyword argument(s) %s" % kw.keys())
+
+        try:
+            return _win_functype_cache[(restype, argtypes, flags)]
+        except KeyError:
+            pass
+
+        class WinFunctionType(_CFuncPtr):
+            _argtypes_ = argtypes
+            _restype_ = restype
+            _flags_ = flags
+        _win_functype_cache[(restype, argtypes, flags)] = WinFunctionType
+        return WinFunctionType
+    if WINFUNCTYPE.__doc__:
+        WINFUNCTYPE.__doc__ = CFUNCTYPE.__doc__.replace("CFUNCTYPE", "WINFUNCTYPE")
+
+elif _os.name == "posix":
+    from _ctypes import dlopen as _dlopen
+
+from _ctypes import sizeof, byref, addressof, alignment, resize
+from _ctypes import get_errno, set_errno
+from _ctypes import _SimpleCData
+
+def _check_size(typ, typecode=None):
+    # Check if sizeof(ctypes_type) against struct.calcsize.  This
+    # should protect somewhat against a misconfigured libffi.
+    from struct import calcsize
+    if typecode is None:
+        # Most _type_ codes are the same as used in struct
+        typecode = typ._type_
+    actual, required = sizeof(typ), calcsize(typecode)
+    if actual != required:
+        raise SystemError("sizeof(%s) wrong: %d instead of %d" % \
+                          (typ, actual, required))
+
+class py_object(_SimpleCData):
+    _type_ = "O"
+    def __repr__(self):
+        try:
+            return super().__repr__()
+        except ValueError:
+            return "%s(<NULL>)" % type(self).__name__
+    __class_getitem__ = classmethod(_types.GenericAlias)
+_check_size(py_object, "P")
+
+class c_short(_SimpleCData):
+    _type_ = "h"
+_check_size(c_short)
+
+class c_ushort(_SimpleCData):
+    _type_ = "H"
+_check_size(c_ushort)
+
+class c_long(_SimpleCData):
+    _type_ = "l"
+_check_size(c_long)
+
+class c_ulong(_SimpleCData):
+    _type_ = "L"
+_check_size(c_ulong)
+
+if _calcsize("i") == _calcsize("l"):
+    # if int and long have the same size, make c_int an alias for c_long
+    c_int = c_long
+    c_uint = c_ulong
+else:
+    class c_int(_SimpleCData):
+        _type_ = "i"
+    _check_size(c_int)
+
+    class c_uint(_SimpleCData):
+        _type_ = "I"
+    _check_size(c_uint)
+
+class c_float(_SimpleCData):
+    _type_ = "f"
+_check_size(c_float)
+
+class c_double(_SimpleCData):
+    _type_ = "d"
+_check_size(c_double)
+
+class c_longdouble(_SimpleCData):
+    _type_ = "g"
+if sizeof(c_longdouble) == sizeof(c_double):
+    c_longdouble = c_double
+
+try:
+    class c_double_complex(_SimpleCData):
+        _type_ = "D"
+    _check_size(c_double_complex)
+    class c_float_complex(_SimpleCData):
+        _type_ = "F"
+    _check_size(c_float_complex)
+    class c_longdouble_complex(_SimpleCData):
+        _type_ = "G"
+except AttributeError:
+    pass
+
+if _calcsize("l") == _calcsize("q"):
+    # if long and long long have the same size, make c_longlong an alias for c_long
+    c_longlong = c_long
+    c_ulonglong = c_ulong
+else:
+    class c_longlong(_SimpleCData):
+        _type_ = "q"
+    _check_size(c_longlong)
+
+    class c_ulonglong(_SimpleCData):
+        _type_ = "Q"
+    ##    def from_param(cls, val):
+    ##        return ('d', float(val), val)
+    ##    from_param = classmethod(from_param)
+    _check_size(c_ulonglong)
+
+class c_ubyte(_SimpleCData):
+    _type_ = "B"
+c_ubyte.__ctype_le__ = c_ubyte.__ctype_be__ = c_ubyte
+# backward compatibility:
+##c_uchar = c_ubyte
+_check_size(c_ubyte)
+
+class c_byte(_SimpleCData):
+    _type_ = "b"
+c_byte.__ctype_le__ = c_byte.__ctype_be__ = c_byte
+_check_size(c_byte)
+
+class c_char(_SimpleCData):
+    _type_ = "c"
+c_char.__ctype_le__ = c_char.__ctype_be__ = c_char
+_check_size(c_char)
+
+class c_char_p(_SimpleCData):
+    _type_ = "z"
+    def __repr__(self):
+        return "%s(%s)" % (self.__class__.__name__, c_void_p.from_buffer(self).value)
+_check_size(c_char_p, "P")
+
+class c_void_p(_SimpleCData):
+    _type_ = "P"
+c_voidp = c_void_p # backwards compatibility (to a bug)
+_check_size(c_void_p)
+
+class c_bool(_SimpleCData):
+    _type_ = "?"
+
+def POINTER(cls):
+    """Create and return a new ctypes pointer type.
+
+    Pointer types are cached and reused internally,
+    so calling this function repeatedly is cheap.
+    """
+    if cls is None:
+        return c_void_p
+    try:
+        return cls.__pointer_type__
+    except AttributeError:
+        pass
+    if isinstance(cls, str):
+        # handle old-style incomplete types (see test_ctypes.test_incomplete)
+        import warnings
+        warnings._deprecated("ctypes.POINTER with string", remove=(3, 19))
+        try:
+            return _pointer_type_cache_fallback[cls]
+        except KeyError:
+            result = type(f'LP_{cls}', (_Pointer,), {})
+            _pointer_type_cache_fallback[cls] = result
+            return result
+
+    # create pointer type and set __pointer_type__ for cls
+    return type(f'LP_{cls.__name__}', (_Pointer,), {'_type_': cls})
+
+def pointer(obj):
+    """Create a new pointer instance, pointing to 'obj'.
+
+    The returned object is of the type POINTER(type(obj)). Note that if you
+    just want to pass a pointer to an object to a foreign function call, you
+    should use byref(obj) which is much faster.
+    """
+    typ = POINTER(type(obj))
+    return typ(obj)
+
+class _PointerTypeCache:
+    def __setitem__(self, cls, pointer_type):
+        import warnings
+        warnings._deprecated("ctypes._pointer_type_cache", remove=(3, 19))
+        try:
+            cls.__pointer_type__ = pointer_type
+        except AttributeError:
+            _pointer_type_cache_fallback[cls] = pointer_type
+
+    def __getitem__(self, cls):
+        import warnings
+        warnings._deprecated("ctypes._pointer_type_cache", remove=(3, 19))
+        try:
+            return cls.__pointer_type__
+        except AttributeError:
+            return _pointer_type_cache_fallback[cls]
+
+    def get(self, cls, default=None):
+        import warnings
+        warnings._deprecated("ctypes._pointer_type_cache", remove=(3, 19))
+        try:
+            return cls.__pointer_type__
+        except AttributeError:
+            return _pointer_type_cache_fallback.get(cls, default)
+
+    def __contains__(self, cls):
+        return hasattr(cls, '__pointer_type__')
+
+_pointer_type_cache_fallback = {}
+_pointer_type_cache = _PointerTypeCache()
+
+class c_wchar_p(_SimpleCData):
+    _type_ = "Z"
+    def __repr__(self):
+        return "%s(%s)" % (self.__class__.__name__, c_void_p.from_buffer(self).value)
+
+class c_wchar(_SimpleCData):
+    _type_ = "u"
+
+def _reset_cache():
+    _pointer_type_cache_fallback.clear()
+    _c_functype_cache.clear()
+    if _os.name == "nt":
+        _win_functype_cache.clear()
+    # _SimpleCData.c_wchar_p_from_param
+    POINTER(c_wchar).from_param = c_wchar_p.from_param
+    # _SimpleCData.c_char_p_from_param
+    POINTER(c_char).from_param = c_char_p.from_param
+
+def create_unicode_buffer(init, size=None):
+    """create_unicode_buffer(aString) -> character array
+    create_unicode_buffer(anInteger) -> character array
+    create_unicode_buffer(aString, anInteger) -> character array
+    """
+    if isinstance(init, str):
+        if size is None:
+            if sizeof(c_wchar) == 2:
+                # UTF-16 requires a surrogate pair (2 wchar_t) for non-BMP
+                # characters (outside [U+0000; U+FFFF] range). +1 for trailing
+                # NUL character.
+                size = sum(2 if ord(c) > 0xFFFF else 1 for c in init) + 1
+            else:
+                # 32-bit wchar_t (1 wchar_t per Unicode character). +1 for
+                # trailing NUL character.
+                size = len(init) + 1
+        _sys.audit("ctypes.create_unicode_buffer", init, size)
+        buftype = c_wchar * size
+        buf = buftype()
+        buf.value = init
+        return buf
+    elif isinstance(init, int):
+        _sys.audit("ctypes.create_unicode_buffer", None, init)
+        buftype = c_wchar * init
+        buf = buftype()
+        return buf
+    raise TypeError(init)
+
+
+def SetPointerType(pointer, cls):
+    import warnings
+    warnings._deprecated("ctypes.SetPointerType", remove=(3, 15))
+    pointer.set_type(cls)
+
+def ARRAY(typ, len):
+    return typ * len
+
+################################################################
+
+
+class CDLL(object):
+    """An instance of this class represents a loaded dll/shared
+    library, exporting functions using the standard C calling
+    convention (named 'cdecl' on Windows).
+
+    The exported functions can be accessed as attributes, or by
+    indexing with the function name.  Examples:
+
+    <obj>.qsort -> callable object
+    <obj>['qsort'] -> callable object
+
+    Calling the functions releases the Python GIL during the call and
+    reacquires it afterwards.
+    """
+    _func_flags_ = _FUNCFLAG_CDECL
+    _func_restype_ = c_int
+    # default values for repr
+    _name = '<uninitialized>'
+    _handle = 0
+    _FuncPtr = None
+
+    def __init__(self, name, mode=DEFAULT_MODE, handle=None,
+                 use_errno=False,
+                 use_last_error=False,
+                 winmode=None):
+        class _FuncPtr(_CFuncPtr):
+            _flags_ = self._func_flags_
+            _restype_ = self._func_restype_
+            if use_errno:
+                _flags_ |= _FUNCFLAG_USE_ERRNO
+            if use_last_error:
+                _flags_ |= _FUNCFLAG_USE_LASTERROR
+
+        self._FuncPtr = _FuncPtr
+        if name:
+            name = _os.fspath(name)
+
+        self._handle = self._load_library(name, mode, handle, winmode)
+
+    if _os.name == "nt":
+        def _load_library(self, name, mode, handle, winmode):
+            if winmode is None:
+                import nt as _nt
+                winmode = _nt._LOAD_LIBRARY_SEARCH_DEFAULT_DIRS
+                # WINAPI LoadLibrary searches for a DLL if the given name
+                # is not fully qualified with an explicit drive. For POSIX
+                # compatibility, and because the DLL search path no longer
+                # contains the working directory, begin by fully resolving
+                # any name that contains a path separator.
+                if name is not None and ('/' in name or '\\' in name):
+                    name = _nt._getfullpathname(name)
+                    winmode |= _nt._LOAD_LIBRARY_SEARCH_DLL_LOAD_DIR
+            self._name = name
+            if handle is not None:
+                return handle
+            return _LoadLibrary(self._name, winmode)
+
+    else:
+        def _load_library(self, name, mode, handle, winmode):
+            # If the filename that has been provided is an iOS/tvOS/watchOS
+            # .fwork file, dereference the location to the true origin of the
+            # binary.
+            if name and name.endswith(".fwork"):
+                with open(name) as f:
+                    name = _os.path.join(
+                        _os.path.dirname(_sys.executable),
+                        f.read().strip()
+                    )
+            if _sys.platform.startswith("aix"):
+                """When the name contains ".a(" and ends with ")",
+                   e.g., "libFOO.a(libFOO.so)" - this is taken to be an
+                   archive(member) syntax for dlopen(), and the mode is adjusted.
+                   Otherwise, name is presented to dlopen() as a file argument.
+                """
+                if name and name.endswith(")") and ".a(" in name:
+                    mode |= _os.RTLD_MEMBER | _os.RTLD_NOW
+            self._name = name
+            if handle is not None:
+                return handle
+            return _dlopen(name, mode)
+
+    def __repr__(self):
+        return "<%s '%s', handle %x at %#x>" % \
+               (self.__class__.__name__, self._name,
+                (self._handle & (_sys.maxsize*2 + 1)),
+                id(self) & (_sys.maxsize*2 + 1))
+
+    def __getattr__(self, name):
+        if name.startswith('__') and name.endswith('__'):
+            raise AttributeError(name)
+        func = self.__getitem__(name)
+        setattr(self, name, func)
+        return func
+
+    def __getitem__(self, name_or_ordinal):
+        func = self._FuncPtr((name_or_ordinal, self))
+        if not isinstance(name_or_ordinal, int):
+            func.__name__ = name_or_ordinal
+        return func
+
+class PyDLL(CDLL):
+    """This class represents the Python library itself.  It allows
+    accessing Python API functions.  The GIL is not released, and
+    Python exceptions are handled correctly.
+    """
+    _func_flags_ = _FUNCFLAG_CDECL | _FUNCFLAG_PYTHONAPI
+
+if _os.name == "nt":
+
+    class WinDLL(CDLL):
+        """This class represents a dll exporting functions using the
+        Windows stdcall calling convention.
+        """
+        _func_flags_ = _FUNCFLAG_STDCALL
+
+    # XXX Hm, what about HRESULT as normal parameter?
+    # Mustn't it derive from c_long then?
+    from _ctypes import _check_HRESULT, _SimpleCData
+    class HRESULT(_SimpleCData):
+        _type_ = "l"
+        # _check_retval_ is called with the function's result when it
+        # is used as restype.  It checks for the FAILED bit, and
+        # raises an OSError if it is set.
+        #
+        # The _check_retval_ method is implemented in C, so that the
+        # method definition itself is not included in the traceback
+        # when it raises an error - that is what we want (and Python
+        # doesn't have a way to raise an exception in the caller's
+        # frame).
+        _check_retval_ = _check_HRESULT
+
+    class OleDLL(CDLL):
+        """This class represents a dll exporting functions using the
+        Windows stdcall calling convention, and returning HRESULT.
+        HRESULT error values are automatically raised as OSError
+        exceptions.
+        """
+        _func_flags_ = _FUNCFLAG_STDCALL
+        _func_restype_ = HRESULT
+
+class LibraryLoader(object):
+    def __init__(self, dlltype):
+        self._dlltype = dlltype
+
+    def __getattr__(self, name):
+        if name[0] == '_':
+            raise AttributeError(name)
+        try:
+            dll = self._dlltype(name)
+        except OSError:
+            raise AttributeError(name)
+        setattr(self, name, dll)
+        return dll
+
+    def __getitem__(self, name):
+        return getattr(self, name)
+
+    def LoadLibrary(self, name):
+        return self._dlltype(name)
+
+    __class_getitem__ = classmethod(_types.GenericAlias)
+
+cdll = LibraryLoader(CDLL)
+pydll = LibraryLoader(PyDLL)
+
+if _os.name == "nt":
+    pythonapi = PyDLL("python dll", None, _sys.dllhandle)
+elif _sys.platform in ["android", "cygwin"]:
+    # These are Unix-like platforms which use a dynamically-linked libpython.
+    pythonapi = PyDLL(_sysconfig.get_config_var("LDLIBRARY"))
+else:
+    pythonapi = PyDLL(None)
+
+
+if _os.name == "nt":
+    windll = LibraryLoader(WinDLL)
+    oledll = LibraryLoader(OleDLL)
+
+    GetLastError = windll.kernel32.GetLastError
+    from _ctypes import get_last_error, set_last_error
+
+    def WinError(code=None, descr=None):
+        if code is None:
+            code = GetLastError()
+        if descr is None:
+            descr = FormatError(code).strip()
+        return OSError(None, descr, None, code)
+
+if sizeof(c_uint) == sizeof(c_void_p):
+    c_size_t = c_uint
+    c_ssize_t = c_int
+elif sizeof(c_ulong) == sizeof(c_void_p):
+    c_size_t = c_ulong
+    c_ssize_t = c_long
+elif sizeof(c_ulonglong) == sizeof(c_void_p):
+    c_size_t = c_ulonglong
+    c_ssize_t = c_longlong
+
+# functions
+
+from _ctypes import _memmove_addr, _memset_addr, _string_at_addr, _cast_addr
+from _ctypes import _memoryview_at_addr
+
+## void *memmove(void *, const void *, size_t);
+memmove = CFUNCTYPE(c_void_p, c_void_p, c_void_p, c_size_t)(_memmove_addr)
+
+## void *memset(void *, int, size_t)
+memset = CFUNCTYPE(c_void_p, c_void_p, c_int, c_size_t)(_memset_addr)
+
+def PYFUNCTYPE(restype, *argtypes):
+    class CFunctionType(_CFuncPtr):
+        _argtypes_ = argtypes
+        _restype_ = restype
+        _flags_ = _FUNCFLAG_CDECL | _FUNCFLAG_PYTHONAPI
+    return CFunctionType
+
+_cast = PYFUNCTYPE(py_object, c_void_p, py_object, py_object)(_cast_addr)
+def cast(obj, typ):
+    return _cast(obj, obj, typ)
+
+_string_at = PYFUNCTYPE(py_object, c_void_p, c_int)(_string_at_addr)
+def string_at(ptr, size=-1):
+    """string_at(ptr[, size]) -> string
+
+    Return the byte string at void *ptr."""
+    return _string_at(ptr, size)
+
+_memoryview_at = PYFUNCTYPE(
+    py_object, c_void_p, c_ssize_t, c_int)(_memoryview_at_addr)
+def memoryview_at(ptr, size, readonly=False):
+    """memoryview_at(ptr, size[, readonly]) -> memoryview
+
+    Return a memoryview representing the memory at void *ptr."""
+    return _memoryview_at(ptr, size, bool(readonly))
+
+try:
+    from _ctypes import _wstring_at_addr
+except ImportError:
+    pass
+else:
+    _wstring_at = PYFUNCTYPE(py_object, c_void_p, c_int)(_wstring_at_addr)
+    def wstring_at(ptr, size=-1):
+        """wstring_at(ptr[, size]) -> string
+
+        Return the wide-character string at void *ptr."""
+        return _wstring_at(ptr, size)
+
+
+if _os.name == "nt": # COM stuff
+    def DllGetClassObject(rclsid, riid, ppv):
+        try:
+            ccom = __import__("comtypes.server.inprocserver", globals(), locals(), ['*'])
+        except ImportError:
+            return -2147221231 # CLASS_E_CLASSNOTAVAILABLE
+        else:
+            return ccom.DllGetClassObject(rclsid, riid, ppv)
+
+    def DllCanUnloadNow():
+        try:
+            ccom = __import__("comtypes.server.inprocserver", globals(), locals(), ['*'])
+        except ImportError:
+            return 0 # S_OK
+        return ccom.DllCanUnloadNow()
+
+from ctypes._endian import BigEndianStructure, LittleEndianStructure
+from ctypes._endian import BigEndianUnion, LittleEndianUnion
+
+# Fill in specifically-sized types
+c_int8 = c_byte
+c_uint8 = c_ubyte
+for kind in [c_short, c_int, c_long, c_longlong]:
+    if sizeof(kind) == 2: c_int16 = kind
+    elif sizeof(kind) == 4: c_int32 = kind
+    elif sizeof(kind) == 8: c_int64 = kind
+for kind in [c_ushort, c_uint, c_ulong, c_ulonglong]:
+    if sizeof(kind) == 2: c_uint16 = kind
+    elif sizeof(kind) == 4: c_uint32 = kind
+    elif sizeof(kind) == 8: c_uint64 = kind
+del(kind)
+
+if SIZEOF_TIME_T == 8:
+    c_time_t = c_int64
+elif SIZEOF_TIME_T == 4:
+    c_time_t = c_int32
+else:
+    raise SystemError(f"Unexpected sizeof(time_t): {SIZEOF_TIME_T=}")
+
+_reset_cache()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_aix.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_aix.py
new file mode 100644
index 0000000000000000000000000000000000000000..ee790f713a9ee3a566c653e2f6b56f3c280c770d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_aix.py
@@ -0,0 +1,327 @@
+"""
+Lib/ctypes.util.find_library() support for AIX
+Similar approach as done for Darwin support by using separate files
+but unlike Darwin - no extension such as ctypes.macholib.*
+
+dlopen() is an interface to AIX initAndLoad() - primary documentation at:
+https://www.ibm.com/support/knowledgecenter/en/ssw_aix_61/com.ibm.aix.basetrf1/dlopen.htm
+https://www.ibm.com/support/knowledgecenter/en/ssw_aix_61/com.ibm.aix.basetrf1/load.htm
+
+AIX supports two styles for dlopen(): svr4 (System V Release 4) which is common on posix
+platforms, but also a BSD style - aka SVR3.
+
+From AIX 5.3 Difference Addendum (December 2004)
+2.9 SVR4 linking affinity
+Nowadays, there are two major object file formats used by the operating systems:
+XCOFF: The COFF enhanced by IBM and others. The original COFF (Common
+Object File Format) was the base of SVR3 and BSD 4.2 systems.
+ELF:   Executable and Linking Format that was developed by AT&T and is a
+base for SVR4 UNIX.
+
+While the shared library content is identical on AIX - one is located as a filepath name
+(svr4 style) and the other is located as a member of an archive (and the archive
+is located as a filepath name).
+
+The key difference arises when supporting multiple abi formats (i.e., 32 and 64 bit).
+For svr4 either only one ABI is supported, or there are two directories, or there
+are different file names. The most common solution for multiple ABI is multiple
+directories.
+
+For the XCOFF (aka AIX) style - one directory (one archive file) is sufficient
+as multiple shared libraries can be in the archive - even sharing the same name.
+In documentation the archive is also referred to as the "base" and the shared
+library object is referred to as the "member".
+
+For dlopen() on AIX (read initAndLoad()) the calls are similar.
+Default activity occurs when no path information is provided. When path
+information is provided dlopen() does not search any other directories.
+
+For SVR4 - the shared library name is the name of the file expected: libFOO.so
+For AIX - the shared library is expressed as base(member). The search is for the
+base (e.g., libFOO.a) and once the base is found the shared library - identified by
+member (e.g., libFOO.so, or shr.o) is located and loaded.
+
+The mode bit RTLD_MEMBER tells initAndLoad() that it needs to use the AIX (SVR3)
+naming style.
+"""
+__author__ = "Michael Felt <aixtools@felt.demon.nl>"
+
+import re
+from os import environ, path
+from sys import executable
+from ctypes import c_void_p, sizeof
+from subprocess import Popen, PIPE, DEVNULL
+
+# Executable bit size - 32 or 64
+# Used to filter the search in an archive by size, e.g., -X64
+AIX_ABI = sizeof(c_void_p) * 8
+
+
+from sys import maxsize
+def _last_version(libnames, sep):
+    def _num_version(libname):
+        # "libxyz.so.MAJOR.MINOR" => [MAJOR, MINOR]
+        parts = libname.split(sep)
+        nums = []
+        try:
+            while parts:
+                nums.insert(0, int(parts.pop()))
+        except ValueError:
+            pass
+        return nums or [maxsize]
+    return max(reversed(libnames), key=_num_version)
+
+def get_ld_header(p):
+    # "nested-function, but placed at module level
+    ld_header = None
+    for line in p.stdout:
+        if line.startswith(('/', './', '../')):
+            ld_header = line
+        elif "INDEX" in line:
+            return ld_header.rstrip('\n')
+    return None
+
+def get_ld_header_info(p):
+    # "nested-function, but placed at module level
+    # as an ld_header was found, return known paths, archives and members
+    # these lines start with a digit
+    info = []
+    for line in p.stdout:
+        if re.match("[0-9]", line):
+            info.append(line)
+        else:
+            # blank line (separator), consume line and end for loop
+            break
+    return info
+
+def get_ld_headers(file):
+    """
+    Parse the header of the loader section of executable and archives
+    This function calls /usr/bin/dump -H as a subprocess
+    and returns a list of (ld_header, ld_header_info) tuples.
+    """
+    # get_ld_headers parsing:
+    # 1. Find a line that starts with /, ./, or ../ - set as ld_header
+    # 2. If "INDEX" in occurs in a following line - return ld_header
+    # 3. get info (lines starting with [0-9])
+    ldr_headers = []
+    p = Popen(["/usr/bin/dump", f"-X{AIX_ABI}", "-H", file],
+        universal_newlines=True, stdout=PIPE, stderr=DEVNULL)
+    # be sure to read to the end-of-file - getting all entries
+    while ld_header := get_ld_header(p):
+        ldr_headers.append((ld_header, get_ld_header_info(p)))
+    p.stdout.close()
+    p.wait()
+    return ldr_headers
+
+def get_shared(ld_headers):
+    """
+    extract the shareable objects from ld_headers
+    character "[" is used to strip off the path information.
+    Note: the "[" and "]" characters that are part of dump -H output
+    are not removed here.
+    """
+    shared = []
+    for (line, _) in ld_headers:
+        # potential member lines contain "["
+        # otherwise, no processing needed
+        if "[" in line:
+            # Strip off trailing colon (:)
+            shared.append(line[line.index("["):-1])
+    return shared
+
+def get_one_match(expr, lines):
+    """
+    Must be only one match, otherwise result is None.
+    When there is a match, strip leading "[" and trailing "]"
+    """
+    # member names in the ld_headers output are between square brackets
+    expr = rf'\[({expr})\]'
+    matches = list(filter(None, (re.search(expr, line) for line in lines)))
+    if len(matches) == 1:
+        return matches[0].group(1)
+    else:
+        return None
+
+# additional processing to deal with AIX legacy names for 64-bit members
+def get_legacy(members):
+    """
+    This routine provides historical aka legacy naming schemes started
+    in AIX4 shared library support for library members names.
+    e.g., in /usr/lib/libc.a the member name shr.o for 32-bit binary and
+    shr_64.o for 64-bit binary.
+    """
+    if AIX_ABI == 64:
+        # AIX 64-bit member is one of shr64.o, shr_64.o, or shr4_64.o
+        expr = r'shr4?_?64\.o'
+        member = get_one_match(expr, members)
+        if member:
+            return member
+    else:
+        # 32-bit legacy names - both shr.o and shr4.o exist.
+        # shr.o is the preferred name so we look for shr.o first
+        #  i.e., shr4.o is returned only when shr.o does not exist
+        for name in ['shr.o', 'shr4.o']:
+            member = get_one_match(re.escape(name), members)
+            if member:
+                return member
+    return None
+
+def get_version(name, members):
+    """
+    Sort list of members and return highest numbered version - if it exists.
+    This function is called when an unversioned libFOO.a(libFOO.so) has
+    not been found.
+
+    Versioning for the member name is expected to follow
+    GNU LIBTOOL conventions: the highest version (x, then X.y, then X.Y.z)
+     * find [libFoo.so.X]
+     * find [libFoo.so.X.Y]
+     * find [libFoo.so.X.Y.Z]
+
+    Before the GNU convention became the standard scheme regardless of
+    binary size AIX packagers used GNU convention "as-is" for 32-bit
+    archive members but used an "distinguishing" name for 64-bit members.
+    This scheme inserted either 64 or _64 between libFOO and .so
+    - generally libFOO_64.so, but occasionally libFOO64.so
+    """
+    # the expression ending for versions must start as
+    # '.so.[0-9]', i.e., *.so.[at least one digit]
+    # while multiple, more specific expressions could be specified
+    # to search for .so.X, .so.X.Y and .so.X.Y.Z
+    # after the first required 'dot' digit
+    # any combination of additional 'dot' digits pairs are accepted
+    # anything more than libFOO.so.digits.digits.digits
+    # should be seen as a member name outside normal expectations
+    exprs = [rf'lib{name}\.so\.[0-9]+[0-9.]*',
+        rf'lib{name}_?64\.so\.[0-9]+[0-9.]*']
+    for expr in exprs:
+        versions = []
+        for line in members:
+            m = re.search(expr, line)
+            if m:
+                versions.append(m.group(0))
+        if versions:
+            return _last_version(versions, '.')
+    return None
+
+def get_member(name, members):
+    """
+    Return an archive member matching the request in name.
+    Name is the library name without any prefix like lib, suffix like .so,
+    or version number.
+    Given a list of members find and return the most appropriate result
+    Priority is given to generic libXXX.so, then a versioned libXXX.so.a.b.c
+    and finally, legacy AIX naming scheme.
+    """
+    # look first for a generic match - prepend lib and append .so
+    expr = rf'lib{name}\.so'
+    member = get_one_match(expr, members)
+    if member:
+        return member
+    elif AIX_ABI == 64:
+        expr = rf'lib{name}64\.so'
+        member = get_one_match(expr, members)
+    if member:
+        return member
+    # since an exact match with .so as suffix was not found
+    # look for a versioned name
+    # If a versioned name is not found, look for AIX legacy member name
+    member = get_version(name, members)
+    if member:
+        return member
+    else:
+        return get_legacy(members)
+
+def get_libpaths():
+    """
+    On AIX, the buildtime searchpath is stored in the executable.
+    as "loader header information".
+    The command /usr/bin/dump -H extracts this info.
+    Prefix searched libraries with LD_LIBRARY_PATH (preferred),
+    or LIBPATH if defined. These paths are appended to the paths
+    to libraries the python executable is linked with.
+    This mimics AIX dlopen() behavior.
+    """
+    libpaths = environ.get("LD_LIBRARY_PATH")
+    if libpaths is None:
+        libpaths = environ.get("LIBPATH")
+    if libpaths is None:
+        libpaths = []
+    else:
+        libpaths = libpaths.split(":")
+    objects = get_ld_headers(executable)
+    for (_, lines) in objects:
+        for line in lines:
+            # the second (optional) argument is PATH if it includes a /
+            path = line.split()[1]
+            if "/" in path:
+                libpaths.extend(path.split(":"))
+    return libpaths
+
+def find_shared(paths, name):
+    """
+    paths is a list of directories to search for an archive.
+    name is the abbreviated name given to find_library().
+    Process: search "paths" for archive, and if an archive is found
+    return the result of get_member().
+    If an archive is not found then return None
+    """
+    for dir in paths:
+        # /lib is a symbolic link to /usr/lib, skip it
+        if dir == "/lib":
+            continue
+        # "lib" is prefixed to emulate compiler name resolution,
+        # e.g., -lc to libc
+        base = f'lib{name}.a'
+        archive = path.join(dir, base)
+        if path.exists(archive):
+            members = get_shared(get_ld_headers(archive))
+            member = get_member(re.escape(name), members)
+            if member is not None:
+                return (base, member)
+            else:
+                return (None, None)
+    return (None, None)
+
+def find_library(name):
+    """AIX implementation of ctypes.util.find_library()
+    Find an archive member that will dlopen(). If not available,
+    also search for a file (or link) with a .so suffix.
+
+    AIX supports two types of schemes that can be used with dlopen().
+    The so-called SystemV Release4 (svr4) format is commonly suffixed
+    with .so while the (default) AIX scheme has the library (archive)
+    ending with the suffix .a
+    As an archive has multiple members (e.g., 32-bit and 64-bit) in one file
+    the argument passed to dlopen must include both the library and
+    the member names in a single string.
+
+    find_library() looks first for an archive (.a) with a suitable member.
+    If no archive+member pair is found, look for a .so file.
+    """
+
+    libpaths = get_libpaths()
+    (base, member) = find_shared(libpaths, name)
+    if base is not None:
+        return f"{base}({member})"
+
+    # To get here, a member in an archive has not been found
+    # In other words, either:
+    # a) a .a file was not found
+    # b) a .a file did not have a suitable member
+    # So, look for a .so file
+    # Check libpaths for .so file
+    # Note, the installation must prepare a link from a .so
+    # to a versioned file
+    # This is common practice by GNU libtool on other platforms
+    soname = f"lib{name}.so"
+    for dir in libpaths:
+        # /lib is a symbolic link to /usr/lib, skip it
+        if dir == "/lib":
+            continue
+        shlib = path.join(dir, soname)
+        if path.exists(shlib):
+            return soname
+    # if we are here, we have not found anything plausible
+    return None
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_endian.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_endian.py
new file mode 100644
index 0000000000000000000000000000000000000000..6382dd22b8acc83653ac76e481cd9aa5b6a9a70f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_endian.py
@@ -0,0 +1,78 @@
+import sys
+from ctypes import Array, Structure, Union
+
+_array_type = type(Array)
+
+def _other_endian(typ):
+    """Return the type with the 'other' byte order.  Simple types like
+    c_int and so on already have __ctype_be__ and __ctype_le__
+    attributes which contain the types, for more complicated types
+    arrays and structures are supported.
+    """
+    # check _OTHER_ENDIAN attribute (present if typ is primitive type)
+    if hasattr(typ, _OTHER_ENDIAN):
+        return getattr(typ, _OTHER_ENDIAN)
+    # if typ is array
+    if isinstance(typ, _array_type):
+        return _other_endian(typ._type_) * typ._length_
+    # if typ is structure or union
+    if issubclass(typ, (Structure, Union)):
+        return typ
+    raise TypeError("This type does not support other endian: %s" % typ)
+
+class _swapped_meta:
+    def __setattr__(self, attrname, value):
+        if attrname == "_fields_":
+            fields = []
+            for desc in value:
+                name = desc[0]
+                typ = desc[1]
+                rest = desc[2:]
+                fields.append((name, _other_endian(typ)) + rest)
+            value = fields
+        super().__setattr__(attrname, value)
+class _swapped_struct_meta(_swapped_meta, type(Structure)): pass
+class _swapped_union_meta(_swapped_meta, type(Union)): pass
+
+################################################################
+
+# Note: The Structure metaclass checks for the *presence* (not the
+# value!) of a _swappedbytes_ attribute to determine the bit order in
+# structures containing bit fields.
+
+if sys.byteorder == "little":
+    _OTHER_ENDIAN = "__ctype_be__"
+
+    LittleEndianStructure = Structure
+
+    class BigEndianStructure(Structure, metaclass=_swapped_struct_meta):
+        """Structure with big endian byte order"""
+        __slots__ = ()
+        _swappedbytes_ = None
+
+    LittleEndianUnion = Union
+
+    class BigEndianUnion(Union, metaclass=_swapped_union_meta):
+        """Union with big endian byte order"""
+        __slots__ = ()
+        _swappedbytes_ = None
+
+elif sys.byteorder == "big":
+    _OTHER_ENDIAN = "__ctype_le__"
+
+    BigEndianStructure = Structure
+
+    class LittleEndianStructure(Structure, metaclass=_swapped_struct_meta):
+        """Structure with little endian byte order"""
+        __slots__ = ()
+        _swappedbytes_ = None
+
+    BigEndianUnion = Union
+
+    class LittleEndianUnion(Union, metaclass=_swapped_union_meta):
+        """Union with little endian byte order"""
+        __slots__ = ()
+        _swappedbytes_ = None
+
+else:
+    raise RuntimeError("Invalid byteorder")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_layout.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_layout.py
new file mode 100644
index 0000000000000000000000000000000000000000..2048ccb6a1c93fff4613c9b9cbc13c110be0cb87
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/_layout.py
@@ -0,0 +1,330 @@
+"""Python implementation of computing the layout of a struct/union
+
+This code is internal and tightly coupled to the C part. The interface
+may change at any time.
+"""
+
+import sys
+import warnings
+
+from _ctypes import CField, buffer_info
+import ctypes
+
+def round_down(n, multiple):
+    assert n >= 0
+    assert multiple > 0
+    return (n // multiple) * multiple
+
+def round_up(n, multiple):
+    assert n >= 0
+    assert multiple > 0
+    return ((n + multiple - 1) // multiple) * multiple
+
+_INT_MAX = (1 << (ctypes.sizeof(ctypes.c_int) * 8) - 1) - 1
+
+
+class StructUnionLayout:
+    def __init__(self, fields, size, align, format_spec):
+        # sequence of CField objects
+        self.fields = fields
+
+        # total size of the aggregate (rounded up to alignment)
+        self.size = size
+
+        # total alignment requirement of the aggregate
+        self.align = align
+
+        # buffer format specification (as a string, UTF-8 but bes
+        # kept ASCII-only)
+        self.format_spec = format_spec
+
+
+def get_layout(cls, input_fields, is_struct, base):
+    """Return a StructUnionLayout for the given class.
+
+    Called by PyCStructUnionType_update_stginfo when _fields_ is assigned
+    to a class.
+    """
+    # Currently there are two modes, selectable using the '_layout_' attribute:
+    #
+    # 'gcc-sysv' mode places fields one after another, bit by bit.
+    #   But "each bit field must fit within a single object of its specified
+    #   type" (GCC manual, section 15.8 "Bit Field Packing"). When it doesn't,
+    #   we insert a few bits of padding to avoid that.
+    #
+    # 'ms' mode works similar except for bitfield packing.  Adjacent
+    #   bit-fields are packed into the same 1-, 2-, or 4-byte allocation unit
+    #   if the integral types are the same size and if the next bit-field fits
+    #   into the current allocation unit without crossing the boundary imposed
+    #   by the common alignment requirements of the bit-fields.
+    #
+    #   See https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html#index-mms-bitfields
+    #   for details.
+
+    # We do not support zero length bitfields (we use bitsize != 0
+    # elsewhere to indicate a bitfield). Here, non-bitfields have bit_size
+    # set to size*8.
+
+    # For clarity, variables that count bits have `bit` in their names.
+
+    pack = getattr(cls, '_pack_', None)
+
+    layout = getattr(cls, '_layout_', None)
+    if layout is None:
+        if sys.platform == 'win32':
+            gcc_layout = False
+        elif pack:
+            if is_struct:
+                base_type_name = 'Structure'
+            else:
+                base_type_name = 'Union'
+            warnings._deprecated(
+                '_pack_ without _layout_',
+                f"Due to '_pack_', the '{cls.__name__}' {base_type_name} will "
+                + "use memory layout compatible with MSVC (Windows). "
+                + "If this is intended, set _layout_ to 'ms'. "
+                + "The implicit default is deprecated and slated to become "
+                + "an error in Python {remove}.",
+                remove=(3, 19),
+            )
+            gcc_layout = False
+        else:
+            gcc_layout = True
+    elif layout == 'ms':
+        gcc_layout = False
+    elif layout == 'gcc-sysv':
+        gcc_layout = True
+    else:
+        raise ValueError(f'unknown _layout_: {layout!r}')
+
+    align = getattr(cls, '_align_', 1)
+    if align < 0:
+        raise ValueError('_align_ must be a non-negative integer')
+    elif align == 0:
+        # Setting `_align_ = 0` amounts to using the default alignment
+        align = 1
+
+    if base:
+        align = max(ctypes.alignment(base), align)
+
+    swapped_bytes = hasattr(cls, '_swappedbytes_')
+    if swapped_bytes:
+        big_endian = sys.byteorder == 'little'
+    else:
+        big_endian = sys.byteorder == 'big'
+
+    if pack is not None:
+        try:
+            pack = int(pack)
+        except (TypeError, ValueError):
+            raise ValueError("_pack_ must be an integer")
+        if pack < 0:
+            raise ValueError("_pack_ must be a non-negative integer")
+        if pack > _INT_MAX:
+            raise ValueError("_pack_ too big")
+        if gcc_layout:
+            raise ValueError('_pack_ is not compatible with gcc-sysv layout')
+
+    result_fields = []
+
+    if is_struct:
+        format_spec_parts = ["T{"]
+    else:
+        format_spec_parts = ["B"]
+
+    last_field_bit_size = 0  # used in MS layout only
+
+    # `8 * next_byte_offset + next_bit_offset` points to where the
+    # next field would start.
+    next_bit_offset = 0
+    next_byte_offset = 0
+
+    # size if this was a struct (sum of field sizes, plus padding)
+    struct_size = 0
+    # max of field sizes; only meaningful for unions
+    union_size = 0
+
+    if base:
+        struct_size = ctypes.sizeof(base)
+        if gcc_layout:
+            next_bit_offset = struct_size * 8
+        else:
+            next_byte_offset = struct_size
+
+    last_size = struct_size
+    for i, field in enumerate(input_fields):
+        if not is_struct:
+            # Unions start fresh each time
+            last_field_bit_size = 0
+            next_bit_offset = 0
+            next_byte_offset = 0
+
+        # Unpack the field
+        field = tuple(field)
+        try:
+            name, ctype = field
+        except (ValueError, TypeError):
+            try:
+                name, ctype, bit_size = field
+            except (ValueError, TypeError) as exc:
+                raise ValueError(
+                    '_fields_ must be a sequence of (name, C type) pairs '
+                    + 'or (name, C type, bit size) triples') from exc
+            is_bitfield = True
+            if bit_size <= 0:
+                raise ValueError(
+                    f'number of bits invalid for bit field {name!r}')
+            type_size = ctypes.sizeof(ctype)
+            if bit_size > type_size * 8:
+                raise ValueError(
+                    f'number of bits invalid for bit field {name!r}')
+        else:
+            is_bitfield = False
+            type_size = ctypes.sizeof(ctype)
+            bit_size = type_size * 8
+
+        type_bit_size = type_size * 8
+        type_align = ctypes.alignment(ctype) or 1
+        type_bit_align = type_align * 8
+
+        if gcc_layout:
+            # We don't use next_byte_offset here
+            assert pack is None
+            assert next_byte_offset == 0
+
+            # Determine whether the bit field, if placed at the next
+            # free bit, fits within a single object of its specified type.
+            # That is: determine a "slot", sized & aligned for the
+            # specified type, which contains the bitfield's beginning:
+            slot_start_bit = round_down(next_bit_offset, type_bit_align)
+            slot_end_bit = slot_start_bit + type_bit_size
+            # And see if it also contains the bitfield's last bit:
+            field_end_bit = next_bit_offset + bit_size
+            if field_end_bit > slot_end_bit:
+                # It doesn't: add padding (bump up to the next
+                # alignment boundary)
+                next_bit_offset = round_up(next_bit_offset, type_bit_align)
+
+            offset = round_down(next_bit_offset, type_bit_align) // 8
+            if is_bitfield:
+                bit_offset = next_bit_offset - 8 * offset
+                assert bit_offset <= type_bit_size
+            else:
+                assert offset == next_bit_offset / 8
+
+            next_bit_offset += bit_size
+            struct_size = round_up(next_bit_offset, 8) // 8
+        else:
+            if pack:
+                type_align = min(pack, type_align)
+
+            # next_byte_offset points to end of current bitfield.
+            # next_bit_offset is generally non-positive,
+            # and 8 * next_byte_offset + next_bit_offset points just behind
+            # the end of the last field we placed.
+            if (
+                (0 < next_bit_offset + bit_size)
+                or (type_bit_size != last_field_bit_size)
+            ):
+                # Close the previous bitfield (if any)
+                # and start a new bitfield
+                next_byte_offset = round_up(next_byte_offset, type_align)
+
+                next_byte_offset += type_size
+
+                last_field_bit_size = type_bit_size
+                # Reminder: 8 * (next_byte_offset) + next_bit_offset
+                # points to where we would start a new field, namely
+                # just behind where we placed the last field plus an
+                # allowance for alignment.
+                next_bit_offset = -last_field_bit_size
+
+            assert type_bit_size == last_field_bit_size
+
+            offset = next_byte_offset - last_field_bit_size // 8
+            if is_bitfield:
+                assert 0 <= (last_field_bit_size + next_bit_offset)
+                bit_offset = last_field_bit_size + next_bit_offset
+            if type_bit_size:
+                assert (last_field_bit_size + next_bit_offset) < type_bit_size
+
+            next_bit_offset += bit_size
+            struct_size = next_byte_offset
+
+        if is_bitfield and big_endian:
+            # On big-endian architectures, bit fields are also laid out
+            # starting with the big end.
+            bit_offset = type_bit_size - bit_size - bit_offset
+
+        # Add the format spec parts
+        if is_struct:
+            padding = offset - last_size
+            format_spec_parts.append(padding_spec(padding))
+
+            fieldfmt, bf_ndim, bf_shape = buffer_info(ctype)
+
+            if bf_shape:
+                format_spec_parts.extend((
+                    "(",
+                    ','.join(str(n) for n in bf_shape),
+                    ")",
+                ))
+
+            if fieldfmt is None:
+                fieldfmt = "B"
+            if isinstance(name, bytes):
+                # a bytes name would be rejected later, but we check early
+                # to avoid a BytesWarning with `python -bb`
+                raise TypeError(
+                    f"field {name!r}: name must be a string, not bytes")
+            format_spec_parts.append(f"{fieldfmt}:{name}:")
+
+        result_fields.append(CField(
+            name=name,
+            type=ctype,
+            byte_size=type_size,
+            byte_offset=offset,
+            bit_size=bit_size if is_bitfield else None,
+            bit_offset=bit_offset if is_bitfield else None,
+            index=i,
+
+            # Do not use CField outside ctypes, yet.
+            # The constructor is internal API and may change without warning.
+            _internal_use=True,
+        ))
+        if is_bitfield and not gcc_layout:
+            assert type_bit_size > 0
+
+        align = max(align, type_align)
+        last_size = struct_size
+        if not is_struct:
+            union_size = max(struct_size, union_size)
+
+    if is_struct:
+        total_size = struct_size
+    else:
+        total_size = union_size
+
+    # Adjust the size according to the alignment requirements
+    aligned_size = round_up(total_size, align)
+
+    # Finish up the format spec
+    if is_struct:
+        padding = aligned_size - total_size
+        format_spec_parts.append(padding_spec(padding))
+        format_spec_parts.append("}")
+
+    return StructUnionLayout(
+        fields=result_fields,
+        size=aligned_size,
+        align=align,
+        format_spec="".join(format_spec_parts),
+    )
+
+
+def padding_spec(padding):
+    if padding <= 0:
+        return ""
+    if padding == 1:
+        return "x"
+    return f"{padding}x"
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..2c900c1e2cf39e927b2ef77c81340a77cc271f31
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/util.py
@@ -0,0 +1,565 @@
+import os
+import shutil
+import subprocess
+import sys
+
+# find_library(name) returns the pathname of a library, or None.
+if os.name == "nt":
+
+    def _get_build_version():
+        """Return the version of MSVC that was used to build Python.
+
+        For Python 2.3 and up, the version number is included in
+        sys.version.  For earlier versions, assume the compiler is MSVC 6.
+        """
+        # This function was copied from Lib/distutils/msvccompiler.py
+        prefix = "MSC v."
+        i = sys.version.find(prefix)
+        if i == -1:
+            return 6
+        i = i + len(prefix)
+        s, rest = sys.version[i:].split(" ", 1)
+        majorVersion = int(s[:-2]) - 6
+        if majorVersion >= 13:
+            majorVersion += 1
+        minorVersion = int(s[2:3]) / 10.0
+        # I don't think paths are affected by minor version in version 6
+        if majorVersion == 6:
+            minorVersion = 0
+        if majorVersion >= 6:
+            return majorVersion + minorVersion
+        # else we don't know what version of the compiler this is
+        return None
+
+    def find_msvcrt():
+        """Return the name of the VC runtime dll"""
+        version = _get_build_version()
+        if version is None:
+            # better be safe than sorry
+            return None
+        if version <= 6:
+            clibname = 'msvcrt'
+        elif version <= 13:
+            clibname = 'msvcr%d' % (version * 10)
+        else:
+            # CRT is no longer directly loadable. See issue23606 for the
+            # discussion about alternative approaches.
+            return None
+
+        # If python was built with in debug mode
+        import importlib.machinery
+        if '_d.pyd' in importlib.machinery.EXTENSION_SUFFIXES:
+            clibname += 'd'
+        return clibname+'.dll'
+
+    def find_library(name):
+        if name in ('c', 'm'):
+            return find_msvcrt()
+        # See MSDN for the REAL search order.
+        for directory in os.environ['PATH'].split(os.pathsep):
+            fname = os.path.join(directory, name)
+            if os.path.isfile(fname):
+                return fname
+            if fname.lower().endswith(".dll"):
+                continue
+            fname = fname + ".dll"
+            if os.path.isfile(fname):
+                return fname
+        return None
+
+    # Listing loaded DLLs on Windows relies on the following APIs:
+    # https://learn.microsoft.com/windows/win32/api/psapi/nf-psapi-enumprocessmodules
+    # https://learn.microsoft.com/windows/win32/api/libloaderapi/nf-libloaderapi-getmodulefilenamew
+    import ctypes
+    from ctypes import wintypes
+
+    _kernel32 = ctypes.WinDLL('kernel32', use_last_error=True)
+    _get_current_process = _kernel32["GetCurrentProcess"]
+    _get_current_process.restype = wintypes.HANDLE
+
+    _k32_get_module_file_name = _kernel32["GetModuleFileNameW"]
+    _k32_get_module_file_name.restype = wintypes.DWORD
+    _k32_get_module_file_name.argtypes = (
+        wintypes.HMODULE,
+        wintypes.LPWSTR,
+        wintypes.DWORD,
+    )
+
+    # gh-145307: We defer loading psapi.dll until _get_module_handles is called.
+    # Loading additional DLLs at startup for functionality that may never be
+    # used is wasteful.
+    _enum_process_modules = None
+
+    def _get_module_filename(module: wintypes.HMODULE):
+        name = (wintypes.WCHAR * 32767)() # UNICODE_STRING_MAX_CHARS
+        if _k32_get_module_file_name(module, name, len(name)):
+            return name.value
+        return None
+
+    def _get_module_handles():
+        global _enum_process_modules
+        if _enum_process_modules is None:
+            _psapi = ctypes.WinDLL('psapi', use_last_error=True)
+            _enum_process_modules = _psapi["EnumProcessModules"]
+            _enum_process_modules.restype = wintypes.BOOL
+            _enum_process_modules.argtypes = (
+                wintypes.HANDLE,
+                ctypes.POINTER(wintypes.HMODULE),
+                wintypes.DWORD,
+                wintypes.LPDWORD,
+            )
+
+        process = _get_current_process()
+        space_needed = wintypes.DWORD()
+        n = 1024
+        while True:
+            modules = (wintypes.HMODULE * n)()
+            if not _enum_process_modules(process,
+                                         modules,
+                                         ctypes.sizeof(modules),
+                                         ctypes.byref(space_needed)):
+                err = ctypes.get_last_error()
+                msg = ctypes.FormatError(err).strip()
+                raise ctypes.WinError(err, f"EnumProcessModules failed: {msg}")
+            n = space_needed.value // ctypes.sizeof(wintypes.HMODULE)
+            if n <= len(modules):
+                return modules[:n]
+
+    def dllist():
+        """Return a list of loaded shared libraries in the current process."""
+        modules = _get_module_handles()
+        libraries = [name for h in modules
+                        if (name := _get_module_filename(h)) is not None]
+        return libraries
+
+elif os.name == "posix" and sys.platform in {"darwin", "ios", "tvos", "watchos"}:
+    from ctypes.macholib.dyld import dyld_find as _dyld_find
+    def find_library(name):
+        possible = ['@executable_path/../lib/lib%s.dylib' % name,
+                    'lib%s.dylib' % name,
+                    '%s.dylib' % name,
+                    '%s.framework/%s' % (name, name)]
+        for name in possible:
+            try:
+                return _dyld_find(name)
+            except ValueError:
+                continue
+        return None
+
+    # Listing loaded libraries on Apple systems relies on the following API:
+    # https://developer.apple.com/library/archive/documentation/System/Conceptual/ManPages_iPhoneOS/man3/dyld.3.html
+    import ctypes
+
+    _libc = ctypes.CDLL(find_library("c"))
+    _dyld_get_image_name = _libc["_dyld_get_image_name"]
+    _dyld_get_image_name.restype = ctypes.c_char_p
+
+    def dllist():
+        """Return a list of loaded shared libraries in the current process."""
+        num_images = _libc._dyld_image_count()
+        libraries = [os.fsdecode(name) for i in range(num_images)
+                        if (name := _dyld_get_image_name(i)) is not None]
+
+        return libraries
+
+elif sys.platform.startswith("aix"):
+    # AIX has two styles of storing shared libraries
+    # GNU auto_tools refer to these as svr4 and aix
+    # svr4 (System V Release 4) is a regular file, often with .so as suffix
+    # AIX style uses an archive (suffix .a) with members (e.g., shr.o, libssl.so)
+    # see issue#26439 and _aix.py for more details
+
+    from ctypes._aix import find_library
+
+elif sys.platform == "android":
+    def find_library(name):
+        directory = "/system/lib"
+        if "64" in os.uname().machine:
+            directory += "64"
+
+        fname = f"{directory}/lib{name}.so"
+        return fname if os.path.isfile(fname) else None
+
+elif sys.platform == "emscripten":
+    def _is_wasm(filename):
+        # Return True if the given file is an WASM module
+        wasm_header = b"\x00asm"
+        with open(filename, 'br') as thefile:
+            return thefile.read(4) == wasm_header
+
+    def find_library(name):
+        candidates = [f"lib{name}.so", f"lib{name}.wasm"]
+        paths = os.environ.get("LD_LIBRARY_PATH", "")
+        for libdir in paths.split(":"):
+            for name in candidates:
+                libfile = os.path.join(libdir, name)
+
+                if os.path.isfile(libfile) and _is_wasm(libfile):
+                    return libfile
+
+        return None
+
+elif os.name == "posix":
+    # Andreas Degert's find functions, using gcc, /sbin/ldconfig, objdump
+    import re, tempfile
+
+    def _is_elf(filename):
+        "Return True if the given file is an ELF file"
+        elf_header = b'\x7fELF'
+        try:
+            with open(filename, 'br') as thefile:
+                return thefile.read(4) == elf_header
+        except FileNotFoundError:
+            return False
+
+    def _findLib_gcc(name):
+        # Run GCC's linker with the -t (aka --trace) option and examine the
+        # library name it prints out. The GCC command will fail because we
+        # haven't supplied a proper program with main(), but that does not
+        # matter.
+        expr = os.fsencode(r'[^\(\)\s]*lib%s\.[^\(\)\s]*' % re.escape(name))
+
+        c_compiler = shutil.which('gcc')
+        if not c_compiler:
+            c_compiler = shutil.which('cc')
+        if not c_compiler:
+            # No C compiler available, give up
+            return None
+
+        temp = tempfile.NamedTemporaryFile()
+        try:
+            args = [c_compiler, '-Wl,-t', '-o', temp.name, '-l' + name]
+
+            env = dict(os.environ)
+            env['LC_ALL'] = 'C'
+            env['LANG'] = 'C'
+            try:
+                proc = subprocess.Popen(args,
+                                        stdout=subprocess.PIPE,
+                                        stderr=subprocess.STDOUT,
+                                        env=env)
+            except OSError:  # E.g. bad executable
+                return None
+            with proc:
+                trace = proc.stdout.read()
+        finally:
+            try:
+                temp.close()
+            except FileNotFoundError:
+                # Raised if the file was already removed, which is the normal
+                # behaviour of GCC if linking fails
+                pass
+        res = re.findall(expr, trace)
+        if not res:
+            return None
+
+        for file in res:
+            # Check if the given file is an elf file: gcc can report
+            # some files that are linker scripts and not actual
+            # shared objects. See bpo-41976 for more details
+            if not _is_elf(file):
+                continue
+            return os.fsdecode(file)
+
+
+    if sys.platform == "sunos5":
+        # use /usr/ccs/bin/dump on solaris
+        def _get_soname(f):
+            if not f:
+                return None
+
+            try:
+                proc = subprocess.Popen(("/usr/ccs/bin/dump", "-Lpv", f),
+                                        stdout=subprocess.PIPE,
+                                        stderr=subprocess.DEVNULL)
+            except OSError:  # E.g. command not found
+                return None
+            with proc:
+                data = proc.stdout.read()
+            res = re.search(br'\[.*\]\sSONAME\s+([^\s]+)', data)
+            if not res:
+                return None
+            return os.fsdecode(res.group(1))
+    else:
+        def _get_soname(f):
+            # assuming GNU binutils / ELF
+            if not f:
+                return None
+            objdump = shutil.which('objdump')
+            if not objdump:
+                # objdump is not available, give up
+                return None
+
+            try:
+                proc = subprocess.Popen((objdump, '-p', '-j', '.dynamic', f),
+                                        stdout=subprocess.PIPE,
+                                        stderr=subprocess.DEVNULL)
+            except OSError:  # E.g. bad executable
+                return None
+            with proc:
+                dump = proc.stdout.read()
+            res = re.search(br'\sSONAME\s+([^\s]+)', dump)
+            if not res:
+                return None
+            return os.fsdecode(res.group(1))
+
+    if sys.platform.startswith(("freebsd", "openbsd", "dragonfly")):
+
+        def _num_version(libname):
+            # "libxyz.so.MAJOR.MINOR" => [ MAJOR, MINOR ]
+            parts = libname.split(b".")
+            nums = []
+            try:
+                while parts:
+                    nums.insert(0, int(parts.pop()))
+            except ValueError:
+                pass
+            return nums or [sys.maxsize]
+
+        def find_library(name):
+            ename = re.escape(name)
+            expr = r':-l%s\.\S+ => \S*/(lib%s\.\S+)' % (ename, ename)
+            expr = os.fsencode(expr)
+
+            try:
+                proc = subprocess.Popen(('/sbin/ldconfig', '-r'),
+                                        stdout=subprocess.PIPE,
+                                        stderr=subprocess.DEVNULL)
+            except OSError:  # E.g. command not found
+                data = b''
+            else:
+                with proc:
+                    data = proc.stdout.read()
+
+            res = re.findall(expr, data)
+            if not res:
+                return _get_soname(_findLib_gcc(name))
+            res.sort(key=_num_version)
+            return os.fsdecode(res[-1])
+
+    elif sys.platform == "sunos5":
+
+        def _findLib_crle(name, is64):
+            if not os.path.exists('/usr/bin/crle'):
+                return None
+
+            env = dict(os.environ)
+            env['LC_ALL'] = 'C'
+
+            if is64:
+                args = ('/usr/bin/crle', '-64')
+            else:
+                args = ('/usr/bin/crle',)
+
+            paths = None
+            try:
+                proc = subprocess.Popen(args,
+                                        stdout=subprocess.PIPE,
+                                        stderr=subprocess.DEVNULL,
+                                        env=env)
+            except OSError:  # E.g. bad executable
+                return None
+            with proc:
+                for line in proc.stdout:
+                    line = line.strip()
+                    if line.startswith(b'Default Library Path (ELF):'):
+                        paths = os.fsdecode(line).split()[4]
+
+            if not paths:
+                return None
+
+            for dir in paths.split(":"):
+                libfile = os.path.join(dir, "lib%s.so" % name)
+                if os.path.exists(libfile):
+                    return libfile
+
+            return None
+
+        def find_library(name, is64 = False):
+            return _get_soname(_findLib_crle(name, is64) or _findLib_gcc(name))
+
+    else:
+
+        def _findSoname_ldconfig(name):
+            import struct
+            if struct.calcsize('l') == 4:
+                machine = os.uname().machine + '-32'
+            else:
+                machine = os.uname().machine + '-64'
+            mach_map = {
+                'x86_64-64': 'libc6,x86-64',
+                'ppc64-64': 'libc6,64bit',
+                'sparc64-64': 'libc6,64bit',
+                's390x-64': 'libc6,64bit',
+                'ia64-64': 'libc6,IA-64',
+                }
+            abi_type = mach_map.get(machine, 'libc6')
+
+            # XXX assuming GLIBC's ldconfig (with option -p)
+            regex = r'\s+(lib%s\.[^\s]+)\s+\(%s'
+            regex = os.fsencode(regex % (re.escape(name), abi_type))
+            try:
+                with subprocess.Popen(['/sbin/ldconfig', '-p'],
+                                      stdin=subprocess.DEVNULL,
+                                      stderr=subprocess.DEVNULL,
+                                      stdout=subprocess.PIPE,
+                                      env={'LC_ALL': 'C', 'LANG': 'C'}) as p:
+                    res = re.search(regex, p.stdout.read())
+                    if res:
+                        return os.fsdecode(res.group(1))
+            except OSError:
+                pass
+
+        def _findLib_ld(name):
+            # See issue #9998 for why this is needed
+            expr = r'[^\(\)\s]*lib%s\.[^\(\)\s]*' % re.escape(name)
+            cmd = ['ld', '-t']
+            libpath = os.environ.get('LD_LIBRARY_PATH')
+            if libpath:
+                for d in libpath.split(':'):
+                    cmd.extend(['-L', d])
+            cmd.extend(['-o', os.devnull, '-l%s' % name])
+            result = None
+            try:
+                p = subprocess.Popen(cmd, stdout=subprocess.PIPE,
+                                     stderr=subprocess.PIPE,
+                                     universal_newlines=True)
+                out, _ = p.communicate()
+                res = re.findall(expr, os.fsdecode(out))
+                for file in res:
+                    # Check if the given file is an elf file: gcc can report
+                    # some files that are linker scripts and not actual
+                    # shared objects. See bpo-41976 for more details
+                    if not _is_elf(file):
+                        continue
+                    return os.fsdecode(file)
+            except Exception:
+                pass  # result will be None
+            return result
+
+        def _findLib_prefix(name):
+            if not name:
+                return None
+            for fullname in (name, "lib%s.so" % (name)):
+                path = os.path.join(sys.prefix, 'lib', fullname)
+                if os.path.exists(path) and not os.path.isdir(path):
+                    return path
+            return None
+
+        def find_library(name):
+            # See issue #9998
+            # Yes calling _findLib_prefix twice is deliberate, because _get_soname ditches
+            # the full path.
+            # When objdump is unavailable this returns None
+            so_name = _get_soname(_findLib_prefix(name)) or name
+            if so_name != name:
+                return _findLib_prefix(so_name) or \
+                       _findLib_prefix(name) or \
+                       _findSoname_ldconfig(name) or \
+                       _get_soname(_findLib_gcc(name)) or _get_soname(_findLib_ld(name))
+            else:
+                 return _findLib_prefix(name) or \
+                        _findSoname_ldconfig(name) or \
+                        _get_soname(_findLib_gcc(name)) or _get_soname(_findLib_ld(name))
+
+
+# Listing loaded libraries on other systems will try to use
+# functions common to Linux and a few other Unix-like systems.
+# See the following for several platforms' documentation of the same API:
+# https://man7.org/linux/man-pages/man3/dl_iterate_phdr.3.html
+# https://man.freebsd.org/cgi/man.cgi?query=dl_iterate_phdr
+# https://man.openbsd.org/dl_iterate_phdr
+# https://docs.oracle.com/cd/E88353_01/html/E37843/dl-iterate-phdr-3c.html
+if (os.name == "posix" and
+    sys.platform not in {"darwin", "ios", "tvos", "watchos"}):
+    import ctypes
+    if hasattr((_libc := ctypes.CDLL(None)), "dl_iterate_phdr"):
+
+        class _dl_phdr_info(ctypes.Structure):
+            _fields_ = [
+                ("dlpi_addr", ctypes.c_void_p),
+                ("dlpi_name", ctypes.c_char_p),
+                ("dlpi_phdr", ctypes.c_void_p),
+                ("dlpi_phnum", ctypes.c_ushort),
+            ]
+
+        _dl_phdr_callback = ctypes.CFUNCTYPE(
+            ctypes.c_int,
+            ctypes.POINTER(_dl_phdr_info),
+            ctypes.c_size_t,
+            ctypes.POINTER(ctypes.py_object),
+        )
+
+        @_dl_phdr_callback
+        def _info_callback(info, _size, data):
+            libraries = data.contents.value
+            name = os.fsdecode(info.contents.dlpi_name)
+            libraries.append(name)
+            return 0
+
+        _dl_iterate_phdr = _libc["dl_iterate_phdr"]
+        _dl_iterate_phdr.argtypes = [
+            _dl_phdr_callback,
+            ctypes.POINTER(ctypes.py_object),
+        ]
+        _dl_iterate_phdr.restype = ctypes.c_int
+
+        def dllist():
+            """Return a list of loaded shared libraries in the current process."""
+            libraries = []
+            _dl_iterate_phdr(_info_callback,
+                             ctypes.byref(ctypes.py_object(libraries)))
+            return libraries
+
+################################################################
+# test code
+
+def test():
+    from ctypes import cdll
+    if os.name == "nt":
+        print(cdll.msvcrt)
+        print(cdll.load("msvcrt"))
+        print(find_library("msvcrt"))
+
+    if os.name == "posix":
+        # find and load_version
+        print(find_library("m"))
+        print(find_library("c"))
+        print(find_library("bz2"))
+
+        # load
+        if sys.platform == "darwin":
+            print(cdll.LoadLibrary("libm.dylib"))
+            print(cdll.LoadLibrary("libcrypto.dylib"))
+            print(cdll.LoadLibrary("libSystem.dylib"))
+            print(cdll.LoadLibrary("System.framework/System"))
+        # issue-26439 - fix broken test call for AIX
+        elif sys.platform.startswith("aix"):
+            from ctypes import CDLL
+            if sys.maxsize < 2**32:
+                print(f"Using CDLL(name, os.RTLD_MEMBER): {CDLL('libc.a(shr.o)', os.RTLD_MEMBER)}")
+                print(f"Using cdll.LoadLibrary(): {cdll.LoadLibrary('libc.a(shr.o)')}")
+                # librpm.so is only available as 32-bit shared library
+                print(find_library("rpm"))
+                print(cdll.LoadLibrary("librpm.so"))
+            else:
+                print(f"Using CDLL(name, os.RTLD_MEMBER): {CDLL('libc.a(shr_64.o)', os.RTLD_MEMBER)}")
+                print(f"Using cdll.LoadLibrary(): {cdll.LoadLibrary('libc.a(shr_64.o)')}")
+            print(f"crypt\t:: {find_library('crypt')}")
+            print(f"crypt\t:: {cdll.LoadLibrary(find_library('crypt'))}")
+            print(f"crypto\t:: {find_library('crypto')}")
+            print(f"crypto\t:: {cdll.LoadLibrary(find_library('crypto'))}")
+        else:
+            print(cdll.LoadLibrary("libm.so"))
+            print(cdll.LoadLibrary("libcrypt.so"))
+            print(find_library("crypt"))
+
+    try:
+        dllist
+    except NameError:
+        print('dllist() not available')
+    else:
+        print(dllist())
+
+if __name__ == "__main__":
+    test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/wintypes.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/wintypes.py
new file mode 100644
index 0000000000000000000000000000000000000000..4beba0d19513e23b3ba0c86a1a28073bc1586565
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ctypes/wintypes.py
@@ -0,0 +1,210 @@
+# The most useful windows datatypes
+import ctypes
+
+BYTE = ctypes.c_ubyte
+WORD = ctypes.c_ushort
+DWORD = ctypes.c_ulong
+
+#UCHAR = ctypes.c_uchar
+CHAR = ctypes.c_char
+WCHAR = ctypes.c_wchar
+UINT = ctypes.c_uint
+INT = ctypes.c_int
+
+DOUBLE = ctypes.c_double
+FLOAT = ctypes.c_float
+
+BOOLEAN = BYTE
+BOOL = ctypes.c_long
+
+class VARIANT_BOOL(ctypes._SimpleCData):
+    _type_ = "v"
+    def __repr__(self):
+        return "%s(%r)" % (self.__class__.__name__, self.value)
+
+ULONG = ctypes.c_ulong
+LONG = ctypes.c_long
+
+USHORT = ctypes.c_ushort
+SHORT = ctypes.c_short
+
+# in the windows header files, these are structures.
+_LARGE_INTEGER = LARGE_INTEGER = ctypes.c_longlong
+_ULARGE_INTEGER = ULARGE_INTEGER = ctypes.c_ulonglong
+
+LPCOLESTR = LPOLESTR = OLESTR = ctypes.c_wchar_p
+LPCWSTR = LPWSTR = ctypes.c_wchar_p
+LPCSTR = LPSTR = ctypes.c_char_p
+LPCVOID = LPVOID = ctypes.c_void_p
+
+# WPARAM is defined as UINT_PTR (unsigned type)
+# LPARAM is defined as LONG_PTR (signed type)
+if ctypes.sizeof(ctypes.c_long) == ctypes.sizeof(ctypes.c_void_p):
+    WPARAM = ctypes.c_ulong
+    LPARAM = ctypes.c_long
+elif ctypes.sizeof(ctypes.c_longlong) == ctypes.sizeof(ctypes.c_void_p):
+    WPARAM = ctypes.c_ulonglong
+    LPARAM = ctypes.c_longlong
+
+ATOM = WORD
+LANGID = WORD
+
+COLORREF = DWORD
+LGRPID = DWORD
+LCTYPE = DWORD
+
+LCID = DWORD
+
+################################################################
+# HANDLE types
+HANDLE = ctypes.c_void_p # in the header files: void *
+
+HACCEL = HANDLE
+HBITMAP = HANDLE
+HBRUSH = HANDLE
+HCOLORSPACE = HANDLE
+HCONV = HANDLE
+HCONVLIST = HANDLE
+HCURSOR = HANDLE
+HDC = HANDLE
+HDDEDATA = HANDLE
+HDESK = HANDLE
+HDROP = HANDLE
+HDWP = HANDLE
+HENHMETAFILE = HANDLE
+HFILE = INT
+HFONT = HANDLE
+HGDIOBJ = HANDLE
+HGLOBAL = HANDLE
+HHOOK = HANDLE
+HICON = HANDLE
+HINSTANCE = HANDLE
+HKEY = HANDLE
+HKL = HANDLE
+HLOCAL = HANDLE
+HMENU = HANDLE
+HMETAFILE = HANDLE
+HMODULE = HANDLE
+HMONITOR = HANDLE
+HPALETTE = HANDLE
+HPEN = HANDLE
+HRESULT = LONG
+HRGN = HANDLE
+HRSRC = HANDLE
+HSTR = HANDLE
+HSZ = HANDLE
+HTASK = HANDLE
+HWINSTA = HANDLE
+HWND = HANDLE
+SC_HANDLE = HANDLE
+SERVICE_STATUS_HANDLE = HANDLE
+
+################################################################
+# Some important structure definitions
+
+class RECT(ctypes.Structure):
+    _fields_ = [("left", LONG),
+                ("top", LONG),
+                ("right", LONG),
+                ("bottom", LONG)]
+tagRECT = _RECTL = RECTL = RECT
+
+class _SMALL_RECT(ctypes.Structure):
+    _fields_ = [('Left', SHORT),
+                ('Top', SHORT),
+                ('Right', SHORT),
+                ('Bottom', SHORT)]
+SMALL_RECT = _SMALL_RECT
+
+class _COORD(ctypes.Structure):
+    _fields_ = [('X', SHORT),
+                ('Y', SHORT)]
+
+class POINT(ctypes.Structure):
+    _fields_ = [("x", LONG),
+                ("y", LONG)]
+tagPOINT = _POINTL = POINTL = POINT
+
+class SIZE(ctypes.Structure):
+    _fields_ = [("cx", LONG),
+                ("cy", LONG)]
+tagSIZE = SIZEL = SIZE
+
+def RGB(red, green, blue):
+    return red + (green << 8) + (blue << 16)
+
+class FILETIME(ctypes.Structure):
+    _fields_ = [("dwLowDateTime", DWORD),
+                ("dwHighDateTime", DWORD)]
+_FILETIME = FILETIME
+
+class MSG(ctypes.Structure):
+    _fields_ = [("hWnd", HWND),
+                ("message", UINT),
+                ("wParam", WPARAM),
+                ("lParam", LPARAM),
+                ("time", DWORD),
+                ("pt", POINT)]
+tagMSG = MSG
+MAX_PATH = 260
+
+class WIN32_FIND_DATAA(ctypes.Structure):
+    _fields_ = [("dwFileAttributes", DWORD),
+                ("ftCreationTime", FILETIME),
+                ("ftLastAccessTime", FILETIME),
+                ("ftLastWriteTime", FILETIME),
+                ("nFileSizeHigh", DWORD),
+                ("nFileSizeLow", DWORD),
+                ("dwReserved0", DWORD),
+                ("dwReserved1", DWORD),
+                ("cFileName", CHAR * MAX_PATH),
+                ("cAlternateFileName", CHAR * 14)]
+
+class WIN32_FIND_DATAW(ctypes.Structure):
+    _fields_ = [("dwFileAttributes", DWORD),
+                ("ftCreationTime", FILETIME),
+                ("ftLastAccessTime", FILETIME),
+                ("ftLastWriteTime", FILETIME),
+                ("nFileSizeHigh", DWORD),
+                ("nFileSizeLow", DWORD),
+                ("dwReserved0", DWORD),
+                ("dwReserved1", DWORD),
+                ("cFileName", WCHAR * MAX_PATH),
+                ("cAlternateFileName", WCHAR * 14)]
+
+################################################################
+# Pointer types
+
+LPBOOL = PBOOL = ctypes.POINTER(BOOL)
+PBOOLEAN = ctypes.POINTER(BOOLEAN)
+LPBYTE = PBYTE = ctypes.POINTER(BYTE)
+PCHAR = ctypes.POINTER(CHAR)
+LPCOLORREF = ctypes.POINTER(COLORREF)
+LPDWORD = PDWORD = ctypes.POINTER(DWORD)
+LPFILETIME = PFILETIME = ctypes.POINTER(FILETIME)
+PFLOAT = ctypes.POINTER(FLOAT)
+LPHANDLE = PHANDLE = ctypes.POINTER(HANDLE)
+PHKEY = ctypes.POINTER(HKEY)
+LPHKL = ctypes.POINTER(HKL)
+LPINT = PINT = ctypes.POINTER(INT)
+PLARGE_INTEGER = ctypes.POINTER(LARGE_INTEGER)
+PLCID = ctypes.POINTER(LCID)
+LPLONG = PLONG = ctypes.POINTER(LONG)
+LPMSG = PMSG = ctypes.POINTER(MSG)
+LPPOINT = PPOINT = ctypes.POINTER(POINT)
+PPOINTL = ctypes.POINTER(POINTL)
+LPRECT = PRECT = ctypes.POINTER(RECT)
+LPRECTL = PRECTL = ctypes.POINTER(RECTL)
+LPSC_HANDLE = ctypes.POINTER(SC_HANDLE)
+PSHORT = ctypes.POINTER(SHORT)
+LPSIZE = PSIZE = ctypes.POINTER(SIZE)
+LPSIZEL = PSIZEL = ctypes.POINTER(SIZEL)
+PSMALL_RECT = ctypes.POINTER(SMALL_RECT)
+LPUINT = PUINT = ctypes.POINTER(UINT)
+PULARGE_INTEGER = ctypes.POINTER(ULARGE_INTEGER)
+PULONG = ctypes.POINTER(ULONG)
+PUSHORT = ctypes.POINTER(USHORT)
+PWCHAR = ctypes.POINTER(WCHAR)
+LPWIN32_FIND_DATAA = PWIN32_FIND_DATAA = ctypes.POINTER(WIN32_FIND_DATAA)
+LPWIN32_FIND_DATAW = PWIN32_FIND_DATAW = ctypes.POINTER(WIN32_FIND_DATAW)
+LPWORD = PWORD = ctypes.POINTER(WORD)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..6165fe6c9875c00c144025d916d9e5d2d8807c54
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/__init__.py
@@ -0,0 +1,101 @@
+"""curses
+
+The main package for curses support for Python.  Normally used by importing
+the package, and perhaps a particular module inside it.
+
+   import curses
+   from curses import textpad
+   curses.initscr()
+   ...
+
+"""
+
+from _curses import *
+import os as _os
+import sys as _sys
+
+# Some constants, most notably the ACS_* ones, are only added to the C
+# _curses module's dictionary after initscr() is called.  (Some
+# versions of SGI's curses don't define values for those constants
+# until initscr() has been called.)  This wrapper function calls the
+# underlying C initscr(), and then copies the constants from the
+# _curses module to the curses package's dictionary.  Don't do 'from
+# curses import *' if you'll be needing the ACS_* constants.
+
+def initscr():
+    import _curses, curses
+    # we call setupterm() here because it raises an error
+    # instead of calling exit() in error cases.
+    setupterm(term=_os.environ.get("TERM", "unknown"),
+              fd=_sys.__stdout__.fileno())
+    stdscr = _curses.initscr()
+    for key, value in _curses.__dict__.items():
+        if key[0:4] == 'ACS_' or key in ('LINES', 'COLS'):
+            setattr(curses, key, value)
+
+    return stdscr
+
+# This is a similar wrapper for start_color(), which adds the COLORS and
+# COLOR_PAIRS variables which are only available after start_color() is
+# called.
+
+def start_color():
+    import _curses, curses
+    retval = _curses.start_color()
+    if hasattr(_curses, 'COLORS'):
+        curses.COLORS = _curses.COLORS
+    if hasattr(_curses, 'COLOR_PAIRS'):
+        curses.COLOR_PAIRS = _curses.COLOR_PAIRS
+    return retval
+
+# Import Python has_key() implementation if _curses doesn't contain has_key()
+
+try:
+    has_key
+except NameError:
+    from .has_key import has_key  # noqa: F401
+
+# Wrapper for the entire curses-based application.  Runs a function which
+# should be the rest of your curses-based application.  If the application
+# raises an exception, wrapper() will restore the terminal to a sane state so
+# you can read the resulting traceback.
+
+def wrapper(func, /, *args, **kwds):
+    """Wrapper function that initializes curses and calls another function,
+    restoring normal keyboard/screen behavior on error.
+    The callable object 'func' is then passed the main window 'stdscr'
+    as its first argument, followed by any other arguments passed to
+    wrapper().
+    """
+
+    try:
+        # Initialize curses
+        stdscr = initscr()
+
+        # Turn off echoing of keys, and enter cbreak mode,
+        # where no buffering is performed on keyboard input
+        noecho()
+        cbreak()
+
+        # In keypad mode, escape sequences for special keys
+        # (like the cursor keys) will be interpreted and
+        # a special value like curses.KEY_LEFT will be returned
+        stdscr.keypad(1)
+
+        # Start color, too.  Harmless if the terminal doesn't have
+        # color; user can test with has_color() later on.  The try/catch
+        # works around a minor bit of over-conscientiousness in the curses
+        # module -- the error return from C start_color() is ignorable.
+        try:
+            start_color()
+        except:
+            pass
+
+        return func(stdscr, *args, **kwds)
+    finally:
+        # Set everything back to normal
+        if 'stdscr' in locals():
+            stdscr.keypad(0)
+            echo()
+            nocbreak()
+            endwin()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/ascii.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/ascii.py
new file mode 100644
index 0000000000000000000000000000000000000000..95acff33925ed7a22224b54bc63ec5bbfdd2e949
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/ascii.py
@@ -0,0 +1,99 @@
+"""Constants and membership tests for ASCII characters"""
+
+NUL     = 0x00  # ^@
+SOH     = 0x01  # ^A
+STX     = 0x02  # ^B
+ETX     = 0x03  # ^C
+EOT     = 0x04  # ^D
+ENQ     = 0x05  # ^E
+ACK     = 0x06  # ^F
+BEL     = 0x07  # ^G
+BS      = 0x08  # ^H
+TAB     = 0x09  # ^I
+HT      = 0x09  # ^I
+LF      = 0x0a  # ^J
+NL      = 0x0a  # ^J
+VT      = 0x0b  # ^K
+FF      = 0x0c  # ^L
+CR      = 0x0d  # ^M
+SO      = 0x0e  # ^N
+SI      = 0x0f  # ^O
+DLE     = 0x10  # ^P
+DC1     = 0x11  # ^Q
+DC2     = 0x12  # ^R
+DC3     = 0x13  # ^S
+DC4     = 0x14  # ^T
+NAK     = 0x15  # ^U
+SYN     = 0x16  # ^V
+ETB     = 0x17  # ^W
+CAN     = 0x18  # ^X
+EM      = 0x19  # ^Y
+SUB     = 0x1a  # ^Z
+ESC     = 0x1b  # ^[
+FS      = 0x1c  # ^\
+GS      = 0x1d  # ^]
+RS      = 0x1e  # ^^
+US      = 0x1f  # ^_
+SP      = 0x20  # space
+DEL     = 0x7f  # delete
+
+controlnames = [
+"NUL", "SOH", "STX", "ETX", "EOT", "ENQ", "ACK", "BEL",
+"BS",  "HT",  "LF",  "VT",  "FF",  "CR",  "SO",  "SI",
+"DLE", "DC1", "DC2", "DC3", "DC4", "NAK", "SYN", "ETB",
+"CAN", "EM",  "SUB", "ESC", "FS",  "GS",  "RS",  "US",
+"SP"
+]
+
+def _ctoi(c):
+    if isinstance(c, str):
+        return ord(c)
+    else:
+        return c
+
+def isalnum(c): return isalpha(c) or isdigit(c)
+def isalpha(c): return isupper(c) or islower(c)
+def isascii(c): return 0 <= _ctoi(c) <= 127          # ?
+def isblank(c): return _ctoi(c) in (9, 32)
+def iscntrl(c): return 0 <= _ctoi(c) <= 31 or _ctoi(c) == 127
+def isdigit(c): return 48 <= _ctoi(c) <= 57
+def isgraph(c): return 33 <= _ctoi(c) <= 126
+def islower(c): return 97 <= _ctoi(c) <= 122
+def isprint(c): return 32 <= _ctoi(c) <= 126
+def ispunct(c): return isgraph(c) and not isalnum(c)
+def isspace(c): return _ctoi(c) in (9, 10, 11, 12, 13, 32)
+def isupper(c): return 65 <= _ctoi(c) <= 90
+def isxdigit(c): return isdigit(c) or \
+    (65 <= _ctoi(c) <= 70) or (97 <= _ctoi(c) <= 102)
+def isctrl(c): return 0 <= _ctoi(c) < 32
+def ismeta(c): return _ctoi(c) > 127
+
+def ascii(c):
+    if isinstance(c, str):
+        return chr(_ctoi(c) & 0x7f)
+    else:
+        return _ctoi(c) & 0x7f
+
+def ctrl(c):
+    if isinstance(c, str):
+        return chr(_ctoi(c) & 0x1f)
+    else:
+        return _ctoi(c) & 0x1f
+
+def alt(c):
+    if isinstance(c, str):
+        return chr(_ctoi(c) | 0x80)
+    else:
+        return _ctoi(c) | 0x80
+
+def unctrl(c):
+    bits = _ctoi(c)
+    if bits == 0x7f:
+        rep = "^?"
+    elif isprint(bits & 0x7f):
+        rep = chr(bits & 0x7f)
+    else:
+        rep = "^" + chr(((bits & 0x7f) | 0x20) + 0x20)
+    if bits & 0x80:
+        return "!" + rep
+    return rep
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/has_key.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/has_key.py
new file mode 100644
index 0000000000000000000000000000000000000000..4e37b480f13353f5510d38d06b085de50f2ee72e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/has_key.py
@@ -0,0 +1,192 @@
+
+#
+# Emulation of has_key() function for platforms that don't use ncurses
+#
+
+import _curses
+
+# Table mapping curses keys to the terminfo capability name
+
+_capability_names = {
+    _curses.KEY_A1: 'ka1',
+    _curses.KEY_A3: 'ka3',
+    _curses.KEY_B2: 'kb2',
+    _curses.KEY_BACKSPACE: 'kbs',
+    _curses.KEY_BEG: 'kbeg',
+    _curses.KEY_BTAB: 'kcbt',
+    _curses.KEY_C1: 'kc1',
+    _curses.KEY_C3: 'kc3',
+    _curses.KEY_CANCEL: 'kcan',
+    _curses.KEY_CATAB: 'ktbc',
+    _curses.KEY_CLEAR: 'kclr',
+    _curses.KEY_CLOSE: 'kclo',
+    _curses.KEY_COMMAND: 'kcmd',
+    _curses.KEY_COPY: 'kcpy',
+    _curses.KEY_CREATE: 'kcrt',
+    _curses.KEY_CTAB: 'kctab',
+    _curses.KEY_DC: 'kdch1',
+    _curses.KEY_DL: 'kdl1',
+    _curses.KEY_DOWN: 'kcud1',
+    _curses.KEY_EIC: 'krmir',
+    _curses.KEY_END: 'kend',
+    _curses.KEY_ENTER: 'kent',
+    _curses.KEY_EOL: 'kel',
+    _curses.KEY_EOS: 'ked',
+    _curses.KEY_EXIT: 'kext',
+    _curses.KEY_F0: 'kf0',
+    _curses.KEY_F1: 'kf1',
+    _curses.KEY_F10: 'kf10',
+    _curses.KEY_F11: 'kf11',
+    _curses.KEY_F12: 'kf12',
+    _curses.KEY_F13: 'kf13',
+    _curses.KEY_F14: 'kf14',
+    _curses.KEY_F15: 'kf15',
+    _curses.KEY_F16: 'kf16',
+    _curses.KEY_F17: 'kf17',
+    _curses.KEY_F18: 'kf18',
+    _curses.KEY_F19: 'kf19',
+    _curses.KEY_F2: 'kf2',
+    _curses.KEY_F20: 'kf20',
+    _curses.KEY_F21: 'kf21',
+    _curses.KEY_F22: 'kf22',
+    _curses.KEY_F23: 'kf23',
+    _curses.KEY_F24: 'kf24',
+    _curses.KEY_F25: 'kf25',
+    _curses.KEY_F26: 'kf26',
+    _curses.KEY_F27: 'kf27',
+    _curses.KEY_F28: 'kf28',
+    _curses.KEY_F29: 'kf29',
+    _curses.KEY_F3: 'kf3',
+    _curses.KEY_F30: 'kf30',
+    _curses.KEY_F31: 'kf31',
+    _curses.KEY_F32: 'kf32',
+    _curses.KEY_F33: 'kf33',
+    _curses.KEY_F34: 'kf34',
+    _curses.KEY_F35: 'kf35',
+    _curses.KEY_F36: 'kf36',
+    _curses.KEY_F37: 'kf37',
+    _curses.KEY_F38: 'kf38',
+    _curses.KEY_F39: 'kf39',
+    _curses.KEY_F4: 'kf4',
+    _curses.KEY_F40: 'kf40',
+    _curses.KEY_F41: 'kf41',
+    _curses.KEY_F42: 'kf42',
+    _curses.KEY_F43: 'kf43',
+    _curses.KEY_F44: 'kf44',
+    _curses.KEY_F45: 'kf45',
+    _curses.KEY_F46: 'kf46',
+    _curses.KEY_F47: 'kf47',
+    _curses.KEY_F48: 'kf48',
+    _curses.KEY_F49: 'kf49',
+    _curses.KEY_F5: 'kf5',
+    _curses.KEY_F50: 'kf50',
+    _curses.KEY_F51: 'kf51',
+    _curses.KEY_F52: 'kf52',
+    _curses.KEY_F53: 'kf53',
+    _curses.KEY_F54: 'kf54',
+    _curses.KEY_F55: 'kf55',
+    _curses.KEY_F56: 'kf56',
+    _curses.KEY_F57: 'kf57',
+    _curses.KEY_F58: 'kf58',
+    _curses.KEY_F59: 'kf59',
+    _curses.KEY_F6: 'kf6',
+    _curses.KEY_F60: 'kf60',
+    _curses.KEY_F61: 'kf61',
+    _curses.KEY_F62: 'kf62',
+    _curses.KEY_F63: 'kf63',
+    _curses.KEY_F7: 'kf7',
+    _curses.KEY_F8: 'kf8',
+    _curses.KEY_F9: 'kf9',
+    _curses.KEY_FIND: 'kfnd',
+    _curses.KEY_HELP: 'khlp',
+    _curses.KEY_HOME: 'khome',
+    _curses.KEY_IC: 'kich1',
+    _curses.KEY_IL: 'kil1',
+    _curses.KEY_LEFT: 'kcub1',
+    _curses.KEY_LL: 'kll',
+    _curses.KEY_MARK: 'kmrk',
+    _curses.KEY_MESSAGE: 'kmsg',
+    _curses.KEY_MOVE: 'kmov',
+    _curses.KEY_NEXT: 'knxt',
+    _curses.KEY_NPAGE: 'knp',
+    _curses.KEY_OPEN: 'kopn',
+    _curses.KEY_OPTIONS: 'kopt',
+    _curses.KEY_PPAGE: 'kpp',
+    _curses.KEY_PREVIOUS: 'kprv',
+    _curses.KEY_PRINT: 'kprt',
+    _curses.KEY_REDO: 'krdo',
+    _curses.KEY_REFERENCE: 'kref',
+    _curses.KEY_REFRESH: 'krfr',
+    _curses.KEY_REPLACE: 'krpl',
+    _curses.KEY_RESTART: 'krst',
+    _curses.KEY_RESUME: 'kres',
+    _curses.KEY_RIGHT: 'kcuf1',
+    _curses.KEY_SAVE: 'ksav',
+    _curses.KEY_SBEG: 'kBEG',
+    _curses.KEY_SCANCEL: 'kCAN',
+    _curses.KEY_SCOMMAND: 'kCMD',
+    _curses.KEY_SCOPY: 'kCPY',
+    _curses.KEY_SCREATE: 'kCRT',
+    _curses.KEY_SDC: 'kDC',
+    _curses.KEY_SDL: 'kDL',
+    _curses.KEY_SELECT: 'kslt',
+    _curses.KEY_SEND: 'kEND',
+    _curses.KEY_SEOL: 'kEOL',
+    _curses.KEY_SEXIT: 'kEXT',
+    _curses.KEY_SF: 'kind',
+    _curses.KEY_SFIND: 'kFND',
+    _curses.KEY_SHELP: 'kHLP',
+    _curses.KEY_SHOME: 'kHOM',
+    _curses.KEY_SIC: 'kIC',
+    _curses.KEY_SLEFT: 'kLFT',
+    _curses.KEY_SMESSAGE: 'kMSG',
+    _curses.KEY_SMOVE: 'kMOV',
+    _curses.KEY_SNEXT: 'kNXT',
+    _curses.KEY_SOPTIONS: 'kOPT',
+    _curses.KEY_SPREVIOUS: 'kPRV',
+    _curses.KEY_SPRINT: 'kPRT',
+    _curses.KEY_SR: 'kri',
+    _curses.KEY_SREDO: 'kRDO',
+    _curses.KEY_SREPLACE: 'kRPL',
+    _curses.KEY_SRIGHT: 'kRIT',
+    _curses.KEY_SRSUME: 'kRES',
+    _curses.KEY_SSAVE: 'kSAV',
+    _curses.KEY_SSUSPEND: 'kSPD',
+    _curses.KEY_STAB: 'khts',
+    _curses.KEY_SUNDO: 'kUND',
+    _curses.KEY_SUSPEND: 'kspd',
+    _curses.KEY_UNDO: 'kund',
+    _curses.KEY_UP: 'kcuu1'
+    }
+
+def has_key(ch):
+    if isinstance(ch, str):
+        ch = ord(ch)
+
+    # Figure out the correct capability name for the keycode.
+    capability_name = _capability_names.get(ch)
+    if capability_name is None:
+        return False
+
+    #Check the current terminal description for that capability;
+    #if present, return true, else return false.
+    if _curses.tigetstr( capability_name ):
+        return True
+    else:
+        return False
+
+if __name__ == '__main__':
+    # Compare the output of this implementation and the ncurses has_key,
+    # on platforms where has_key is already available
+    try:
+        L = []
+        _curses.initscr()
+        for key in _capability_names.keys():
+            system = _curses.has_key(key)
+            python = has_key(key)
+            if system != python:
+                L.append( 'Mismatch for key %s, system=%i, Python=%i'
+                          % (_curses.keyname( key ), system, python) )
+    finally:
+        _curses.endwin()
+        for i in L: print(i)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/panel.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/panel.py
new file mode 100644
index 0000000000000000000000000000000000000000..067afef730a5b65dd5ef971faad848db4d4717fa
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/panel.py
@@ -0,0 +1,6 @@
+"""curses.panel
+
+Module for using panels with curses.
+"""
+
+from _curses_panel import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/textpad.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/textpad.py
new file mode 100644
index 0000000000000000000000000000000000000000..aa87061b8d749e97245676ef3d78c2b4cb034193
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/curses/textpad.py
@@ -0,0 +1,204 @@
+"""Simple textbox editing widget with Emacs-like keybindings."""
+
+import curses
+import curses.ascii
+
+def rectangle(win, uly, ulx, lry, lrx):
+    """Draw a rectangle with corners at the provided upper-left
+    and lower-right coordinates.
+    """
+    win.vline(uly+1, ulx, curses.ACS_VLINE, lry - uly - 1)
+    win.hline(uly, ulx+1, curses.ACS_HLINE, lrx - ulx - 1)
+    win.hline(lry, ulx+1, curses.ACS_HLINE, lrx - ulx - 1)
+    win.vline(uly+1, lrx, curses.ACS_VLINE, lry - uly - 1)
+    win.addch(uly, ulx, curses.ACS_ULCORNER)
+    win.addch(uly, lrx, curses.ACS_URCORNER)
+    win.addch(lry, lrx, curses.ACS_LRCORNER)
+    win.addch(lry, ulx, curses.ACS_LLCORNER)
+
+class Textbox:
+    """Editing widget using the interior of a window object.
+     Supports the following Emacs-like key bindings:
+
+    Ctrl-A      Go to left edge of window.
+    Ctrl-B      Cursor left, wrapping to previous line if appropriate.
+    Ctrl-D      Delete character under cursor.
+    Ctrl-E      Go to right edge (stripspaces off) or end of line (stripspaces on).
+    Ctrl-F      Cursor right, wrapping to next line when appropriate.
+    Ctrl-G      Terminate, returning the window contents.
+    Ctrl-H      Delete character backward.
+    Ctrl-J      Terminate if the window is 1 line, otherwise insert newline.
+    Ctrl-K      If line is blank, delete it, otherwise clear to end of line.
+    Ctrl-L      Refresh screen.
+    Ctrl-N      Cursor down; move down one line.
+    Ctrl-O      Insert a blank line at cursor location.
+    Ctrl-P      Cursor up; move up one line.
+
+    Move operations do nothing if the cursor is at an edge where the movement
+    is not possible.  The following synonyms are supported where possible:
+
+    KEY_LEFT = Ctrl-B, KEY_RIGHT = Ctrl-F, KEY_UP = Ctrl-P, KEY_DOWN = Ctrl-N
+    KEY_BACKSPACE = Ctrl-h
+    """
+    def __init__(self, win, insert_mode=False):
+        self.win = win
+        self.insert_mode = insert_mode
+        self._update_max_yx()
+        self.stripspaces = 1
+        self.lastcmd = None
+        win.keypad(1)
+
+    def _update_max_yx(self):
+        maxy, maxx = self.win.getmaxyx()
+        self.maxy = maxy - 1
+        self.maxx = maxx - 1
+
+    def _end_of_line(self, y):
+        """Go to the location of the first blank on the given line,
+        returning the index of the last non-blank character."""
+        self._update_max_yx()
+        last = self.maxx
+        while True:
+            if curses.ascii.ascii(self.win.inch(y, last)) != curses.ascii.SP:
+                last = min(self.maxx, last+1)
+                break
+            elif last == 0:
+                break
+            last = last - 1
+        return last
+
+    def _insert_printable_char(self, ch):
+        self._update_max_yx()
+        (y, x) = self.win.getyx()
+        backyx = None
+        while y < self.maxy or x < self.maxx:
+            if self.insert_mode:
+                oldch = self.win.inch()
+            # The try-catch ignores the error we trigger from some curses
+            # versions by trying to write into the lowest-rightmost spot
+            # in the window.
+            try:
+                self.win.addch(ch)
+            except curses.error:
+                pass
+            if not self.insert_mode or not curses.ascii.isprint(oldch):
+                break
+            ch = oldch
+            (y, x) = self.win.getyx()
+            # Remember where to put the cursor back since we are in insert_mode
+            if backyx is None:
+                backyx = y, x
+
+        if backyx is not None:
+            self.win.move(*backyx)
+
+    def do_command(self, ch):
+        "Process a single editing command."
+        self._update_max_yx()
+        (y, x) = self.win.getyx()
+        self.lastcmd = ch
+        if curses.ascii.isprint(ch):
+            if y < self.maxy or x < self.maxx:
+                self._insert_printable_char(ch)
+        elif ch == curses.ascii.SOH:                           # ^a
+            self.win.move(y, 0)
+        elif ch in (curses.ascii.STX,curses.KEY_LEFT,
+                    curses.ascii.BS,
+                    curses.KEY_BACKSPACE,
+                    curses.ascii.DEL):
+            if x > 0:
+                self.win.move(y, x-1)
+            elif y == 0:
+                pass
+            elif self.stripspaces:
+                self.win.move(y-1, self._end_of_line(y-1))
+            else:
+                self.win.move(y-1, self.maxx)
+            if ch in (curses.ascii.BS, curses.KEY_BACKSPACE, curses.ascii.DEL):
+                self.win.delch()
+        elif ch == curses.ascii.EOT:                           # ^d
+            self.win.delch()
+        elif ch == curses.ascii.ENQ:                           # ^e
+            if self.stripspaces:
+                self.win.move(y, self._end_of_line(y))
+            else:
+                self.win.move(y, self.maxx)
+        elif ch in (curses.ascii.ACK, curses.KEY_RIGHT):       # ^f
+            if x < self.maxx:
+                self.win.move(y, x+1)
+            elif y == self.maxy:
+                pass
+            else:
+                self.win.move(y+1, 0)
+        elif ch == curses.ascii.BEL:                           # ^g
+            return 0
+        elif ch == curses.ascii.NL:                            # ^j
+            if self.maxy == 0:
+                return 0
+            elif y < self.maxy:
+                self.win.move(y+1, 0)
+        elif ch == curses.ascii.VT:                            # ^k
+            if x == 0 and self._end_of_line(y) == 0:
+                self.win.deleteln()
+            else:
+                # first undo the effect of self._end_of_line
+                self.win.move(y, x)
+                self.win.clrtoeol()
+        elif ch == curses.ascii.FF:                            # ^l
+            self.win.refresh()
+        elif ch in (curses.ascii.SO, curses.KEY_DOWN):         # ^n
+            if y < self.maxy:
+                self.win.move(y+1, x)
+                if x > self._end_of_line(y+1):
+                    self.win.move(y+1, self._end_of_line(y+1))
+        elif ch == curses.ascii.SI:                            # ^o
+            self.win.insertln()
+        elif ch in (curses.ascii.DLE, curses.KEY_UP):          # ^p
+            if y > 0:
+                self.win.move(y-1, x)
+                if x > self._end_of_line(y-1):
+                    self.win.move(y-1, self._end_of_line(y-1))
+        return 1
+
+    def gather(self):
+        "Collect and return the contents of the window."
+        result = ""
+        self._update_max_yx()
+        for y in range(self.maxy+1):
+            self.win.move(y, 0)
+            stop = self._end_of_line(y)
+            if stop == 0 and self.stripspaces:
+                continue
+            for x in range(self.maxx+1):
+                if self.stripspaces and x > stop:
+                    break
+                result = result + chr(curses.ascii.ascii(self.win.inch(y, x)))
+            if self.maxy > 0:
+                result = result + "\n"
+        return result
+
+    def edit(self, validate=None):
+        "Edit in the widget window and collect the results."
+        while 1:
+            ch = self.win.getch()
+            if validate:
+                ch = validate(ch)
+            if not ch:
+                continue
+            if not self.do_command(ch):
+                break
+            self.win.refresh()
+        return self.gather()
+
+if __name__ == '__main__':
+    def test_editbox(stdscr):
+        ncols, nlines = 9, 4
+        uly, ulx = 15, 20
+        stdscr.addstr(uly-2, ulx, "Use Ctrl-G to end editing.")
+        win = curses.newwin(nlines, ncols, uly, ulx)
+        rectangle(stdscr, uly-1, ulx-1, uly + nlines, ulx + ncols)
+        stdscr.refresh()
+        return Textbox(win).edit()
+
+    str = curses.wrapper(test_editbox)
+    print('Contents of text box:', repr(str))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..4fdbc54e74cfb64ffe16263a07840f2a6c932e88
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/__init__.py
@@ -0,0 +1,194 @@
+"""Generic interface to all dbm clones.
+
+Use
+
+        import dbm
+        d = dbm.open(file, 'w', 0o666)
+
+The returned object is a dbm.sqlite3, dbm.gnu, dbm.ndbm or dbm.dumb database object, dependent on the
+type of database being opened (determined by the whichdb function) in the case
+of an existing dbm. If the dbm does not exist and the create or new flag ('c'
+or 'n') was specified, the dbm type will be determined by the availability of
+the modules (tested in the above order).
+
+It has the following interface (key and data are strings):
+
+        d[key] = data   # store data at key (may override data at
+                        # existing key)
+        data = d[key]   # retrieve data at key (raise KeyError if no
+                        # such key)
+        del d[key]      # delete data stored at key (raises KeyError
+                        # if no such key)
+        flag = key in d # true if the key exists
+        list = d.keys() # return a list of all existing keys (slow!)
+
+Future versions may change the order in which implementations are
+tested for existence, and add interfaces to other dbm-like
+implementations.
+"""
+
+__all__ = ['open', 'whichdb', 'error']
+
+import io
+import os
+import struct
+import sys
+
+
+class error(Exception):
+    pass
+
+_names = ['dbm.sqlite3', 'dbm.gnu', 'dbm.ndbm', 'dbm.dumb']
+_defaultmod = None
+_modules = {}
+
+error = (error, OSError)
+
+try:
+    from dbm import ndbm
+except ImportError:
+    ndbm = None
+
+
+def open(file, flag='r', mode=0o666):
+    """Open or create database at path given by *file*.
+
+    Optional argument *flag* can be 'r' (default) for read-only access, 'w'
+    for read-write access of an existing database, 'c' for read-write access
+    to a new or existing database, and 'n' for read-write access to a new
+    database.
+
+    Note: 'r' and 'w' fail if the database doesn't exist; 'c' creates it
+    only if it doesn't exist; and 'n' always creates a new database.
+    """
+    global _defaultmod
+    if _defaultmod is None:
+        for name in _names:
+            try:
+                mod = __import__(name, fromlist=['open'])
+            except ImportError:
+                continue
+            if not _defaultmod:
+                _defaultmod = mod
+            _modules[name] = mod
+        if not _defaultmod:
+            raise ImportError("no dbm clone found; tried %s" % _names)
+
+    # guess the type of an existing database, if not creating a new one
+    result = whichdb(file) if 'n' not in flag else None
+    if result is None:
+        # db doesn't exist or 'n' flag was specified to create a new db
+        if 'c' in flag or 'n' in flag:
+            # file doesn't exist and the new flag was used so use default type
+            mod = _defaultmod
+        else:
+            raise error[0]("db file doesn't exist; "
+                           "use 'c' or 'n' flag to create a new db")
+    elif result == "":
+        # db type cannot be determined
+        raise error[0]("db type could not be determined")
+    elif result not in _modules:
+        raise error[0]("db type is {0}, but the module is not "
+                       "available".format(result))
+    else:
+        mod = _modules[result]
+    return mod.open(file, flag, mode)
+
+
+def whichdb(filename):
+    """Guess which db package to use to open a db file.
+
+    Return values:
+
+    - None if the database file can't be read;
+    - empty string if the file can be read but can't be recognized
+    - the name of the dbm submodule (e.g. "ndbm" or "gnu") if recognized.
+
+    Importing the given module may still fail, and opening the
+    database using that module may still fail.
+    """
+
+    # Check for ndbm first -- this has a .pag and a .dir file
+    filename = os.fsencode(filename)
+    try:
+        f = io.open(filename + b".pag", "rb")
+        f.close()
+        f = io.open(filename + b".dir", "rb")
+        f.close()
+        return "dbm.ndbm"
+    except OSError:
+        # some dbm emulations based on Berkeley DB generate a .db file
+        # some do not, but they should be caught by the bsd checks
+        try:
+            f = io.open(filename + b".db", "rb")
+            f.close()
+            # guarantee we can actually open the file using dbm
+            # kind of overkill, but since we are dealing with emulations
+            # it seems like a prudent step
+            if ndbm is not None:
+                d = ndbm.open(filename)
+                d.close()
+                return "dbm.ndbm"
+        except OSError:
+            pass
+
+    # Check for dumbdbm next -- this has a .dir and a .dat file
+    try:
+        # First check for presence of files
+        os.stat(filename + b".dat")
+        size = os.stat(filename + b".dir").st_size
+        # dumbdbm files with no keys are empty
+        if size == 0:
+            return "dbm.dumb"
+        f = io.open(filename + b".dir", "rb")
+        try:
+            if f.read(1) in (b"'", b'"'):
+                return "dbm.dumb"
+        finally:
+            f.close()
+    except OSError:
+        pass
+
+    # See if the file exists, return None if not
+    try:
+        f = io.open(filename, "rb")
+    except OSError:
+        return None
+
+    with f:
+        # Read the start of the file -- the magic number
+        s16 = f.read(16)
+    s = s16[0:4]
+
+    # Return "" if not at least 4 bytes
+    if len(s) != 4:
+        return ""
+
+    # Check for SQLite3 header string.
+    if s16 == b"SQLite format 3\0":
+        return "dbm.sqlite3"
+
+    # Convert to 4-byte int in native byte order -- return "" if impossible
+    try:
+        (magic,) = struct.unpack("=l", s)
+    except struct.error:
+        return ""
+
+    # Check for GNU dbm
+    if magic in (0x13579ace, 0x13579acd, 0x13579acf):
+        return "dbm.gnu"
+
+    # Later versions of Berkeley db hash file have a 12-byte pad in
+    # front of the file type
+    try:
+        (magic,) = struct.unpack("=l", s16[-4:])
+    except struct.error:
+        return ""
+
+    # Unknown
+    return ""
+
+
+if __name__ == "__main__":
+    for filename in sys.argv[1:]:
+        print(whichdb(filename) or "UNKNOWN", filename)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/dumb.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/dumb.py
new file mode 100644
index 0000000000000000000000000000000000000000..def120ffc3778b6ac5e92abd330a1725ba2c2d2c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/dumb.py
@@ -0,0 +1,319 @@
+"""A dumb and slow but simple dbm clone.
+
+For database spam, spam.dir contains the index (a text file),
+spam.bak *may* contain a backup of the index (also a text file),
+while spam.dat contains the data (a binary file).
+
+XXX TO DO:
+
+- seems to contain a bug when updating...
+
+- reclaim free space (currently, space once occupied by deleted or expanded
+items is never reused)
+
+- support concurrent access (currently, if two processes take turns making
+updates, they can mess up the index)
+
+- support efficient access to large databases (currently, the whole index
+is read when the database is opened, and some updates rewrite the whole index)
+
+- support opening for read-only (flag = 'm')
+
+"""
+
+import ast as _ast
+import io as _io
+import os as _os
+import collections.abc
+
+__all__ = ["error", "open"]
+
+_BLOCKSIZE = 512
+
+error = OSError
+
+class _Database(collections.abc.MutableMapping):
+
+    # The on-disk directory and data files can remain in mutually
+    # inconsistent states for an arbitrarily long time (see comments
+    # at the end of __setitem__).  This is only repaired when _commit()
+    # gets called.  One place _commit() gets called is from __del__(),
+    # and if that occurs at program shutdown time, module globals may
+    # already have gotten rebound to None.  Since it's crucial that
+    # _commit() finish successfully, we can't ignore shutdown races
+    # here, and _commit() must not reference any globals.
+    _os = _os       # for _commit()
+    _io = _io       # for _commit()
+
+    def __init__(self, filebasename, mode, flag='c'):
+        filebasename = self._os.fsencode(filebasename)
+        self._mode = mode
+        self._readonly = (flag == 'r')
+
+        # The directory file is a text file.  Each line looks like
+        #    "%r, (%d, %d)\n" % (key, pos, siz)
+        # where key is the string key, pos is the offset into the dat
+        # file of the associated value's first byte, and siz is the number
+        # of bytes in the associated value.
+        self._dirfile = filebasename + b'.dir'
+
+        # The data file is a binary file pointed into by the directory
+        # file, and holds the values associated with keys.  Each value
+        # begins at a _BLOCKSIZE-aligned byte offset, and is a raw
+        # binary 8-bit string value.
+        self._datfile = filebasename + b'.dat'
+        self._bakfile = filebasename + b'.bak'
+
+        # The index is an in-memory dict, mirroring the directory file.
+        self._index = None  # maps keys to (pos, siz) pairs
+
+        # Handle the creation
+        self._create(flag)
+        self._update(flag)
+
+    def _create(self, flag):
+        if flag == 'n':
+            for filename in (self._datfile, self._bakfile, self._dirfile):
+                try:
+                    _os.remove(filename)
+                except OSError:
+                    pass
+        # Mod by Jack: create data file if needed
+        try:
+            f = _io.open(self._datfile, 'r', encoding="Latin-1")
+        except OSError:
+            if flag not in ('c', 'n'):
+                raise
+            with _io.open(self._datfile, 'w', encoding="Latin-1") as f:
+                self._chmod(self._datfile)
+        else:
+            f.close()
+
+    # Read directory file into the in-memory index dict.
+    def _update(self, flag):
+        self._modified = False
+        self._index = {}
+        try:
+            f = _io.open(self._dirfile, 'r', encoding="Latin-1")
+        except OSError:
+            if flag not in ('c', 'n'):
+                raise
+            with self._io.open(self._dirfile, 'w', encoding="Latin-1") as f:
+                self._chmod(self._dirfile)
+        else:
+            with f:
+                for line in f:
+                    line = line.rstrip()
+                    key, pos_and_siz_pair = _ast.literal_eval(line)
+                    key = key.encode('Latin-1')
+                    self._index[key] = pos_and_siz_pair
+
+    # Write the index dict to the directory file.  The original directory
+    # file (if any) is renamed with a .bak extension first.  If a .bak
+    # file currently exists, it's deleted.
+    def _commit(self):
+        # CAUTION:  It's vital that _commit() succeed, and _commit() can
+        # be called from __del__().  Therefore we must never reference a
+        # global in this routine.
+        if self._index is None or not self._modified:
+            return  # nothing to do
+
+        try:
+            self._os.unlink(self._bakfile)
+        except OSError:
+            pass
+
+        try:
+            self._os.rename(self._dirfile, self._bakfile)
+        except OSError:
+            pass
+
+        with self._io.open(self._dirfile, 'w', encoding="Latin-1") as f:
+            self._chmod(self._dirfile)
+            for key, pos_and_siz_pair in self._index.items():
+                # Use Latin-1 since it has no qualms with any value in any
+                # position; UTF-8, though, does care sometimes.
+                entry = "%r, %r\n" % (key.decode('Latin-1'), pos_and_siz_pair)
+                f.write(entry)
+        self._modified = False
+
+    sync = _commit
+
+    def _verify_open(self):
+        if self._index is None:
+            raise error('DBM object has already been closed')
+
+    def __getitem__(self, key):
+        if isinstance(key, str):
+            key = key.encode('utf-8')
+        self._verify_open()
+        pos, siz = self._index[key]     # may raise KeyError
+        with _io.open(self._datfile, 'rb') as f:
+            f.seek(pos)
+            dat = f.read(siz)
+        return dat
+
+    # Append val to the data file, starting at a _BLOCKSIZE-aligned
+    # offset.  The data file is first padded with NUL bytes (if needed)
+    # to get to an aligned offset.  Return pair
+    #     (starting offset of val, len(val))
+    def _addval(self, val):
+        with _io.open(self._datfile, 'rb+') as f:
+            f.seek(0, 2)
+            pos = int(f.tell())
+            npos = ((pos + _BLOCKSIZE - 1) // _BLOCKSIZE) * _BLOCKSIZE
+            f.write(b'\0'*(npos-pos))
+            pos = npos
+            f.write(val)
+        return (pos, len(val))
+
+    # Write val to the data file, starting at offset pos.  The caller
+    # is responsible for ensuring that there's enough room starting at
+    # pos to hold val, without overwriting some other value.  Return
+    # pair (pos, len(val)).
+    def _setval(self, pos, val):
+        with _io.open(self._datfile, 'rb+') as f:
+            f.seek(pos)
+            f.write(val)
+        return (pos, len(val))
+
+    # key is a new key whose associated value starts in the data file
+    # at offset pos and with length siz.  Add an index record to
+    # the in-memory index dict, and append one to the directory file.
+    def _addkey(self, key, pos_and_siz_pair):
+        self._index[key] = pos_and_siz_pair
+        with _io.open(self._dirfile, 'a', encoding="Latin-1") as f:
+            self._chmod(self._dirfile)
+            f.write("%r, %r\n" % (key.decode("Latin-1"), pos_and_siz_pair))
+
+    def __setitem__(self, key, val):
+        if self._readonly:
+            raise error('The database is opened for reading only')
+        if isinstance(key, str):
+            key = key.encode('utf-8')
+        elif not isinstance(key, (bytes, bytearray)):
+            raise TypeError("keys must be bytes or strings")
+        if isinstance(val, str):
+            val = val.encode('utf-8')
+        elif not isinstance(val, (bytes, bytearray)):
+            raise TypeError("values must be bytes or strings")
+        self._verify_open()
+        self._modified = True
+        if key not in self._index:
+            self._addkey(key, self._addval(val))
+        else:
+            # See whether the new value is small enough to fit in the
+            # (padded) space currently occupied by the old value.
+            pos, siz = self._index[key]
+            oldblocks = (siz + _BLOCKSIZE - 1) // _BLOCKSIZE
+            newblocks = (len(val) + _BLOCKSIZE - 1) // _BLOCKSIZE
+            if newblocks <= oldblocks:
+                self._index[key] = self._setval(pos, val)
+            else:
+                # The new value doesn't fit in the (padded) space used
+                # by the old value.  The blocks used by the old value are
+                # forever lost.
+                self._index[key] = self._addval(val)
+
+            # Note that _index may be out of synch with the directory
+            # file now:  _setval() and _addval() don't update the directory
+            # file.  This also means that the on-disk directory and data
+            # files are in a mutually inconsistent state, and they'll
+            # remain that way until _commit() is called.  Note that this
+            # is a disaster (for the database) if the program crashes
+            # (so that _commit() never gets called).
+
+    def __delitem__(self, key):
+        if self._readonly:
+            raise error('The database is opened for reading only')
+        if isinstance(key, str):
+            key = key.encode('utf-8')
+        self._verify_open()
+        self._modified = True
+        # The blocks used by the associated value are lost.
+        del self._index[key]
+        # XXX It's unclear why we do a _commit() here (the code always
+        # XXX has, so I'm not changing it).  __setitem__ doesn't try to
+        # XXX keep the directory file in synch.  Why should we?  Or
+        # XXX why shouldn't __setitem__?
+        self._commit()
+
+    def keys(self):
+        try:
+            return list(self._index)
+        except TypeError:
+            raise error('DBM object has already been closed') from None
+
+    def items(self):
+        self._verify_open()
+        return [(key, self[key]) for key in self._index.keys()]
+
+    def __contains__(self, key):
+        if isinstance(key, str):
+            key = key.encode('utf-8')
+        try:
+            return key in self._index
+        except TypeError:
+            if self._index is None:
+                raise error('DBM object has already been closed') from None
+            else:
+                raise
+
+    def iterkeys(self):
+        try:
+            return iter(self._index)
+        except TypeError:
+            raise error('DBM object has already been closed') from None
+    __iter__ = iterkeys
+
+    def __len__(self):
+        try:
+            return len(self._index)
+        except TypeError:
+            raise error('DBM object has already been closed') from None
+
+    def close(self):
+        try:
+            self._commit()
+        finally:
+            self._index = self._datfile = self._dirfile = self._bakfile = None
+
+    __del__ = close
+
+    def _chmod(self, file):
+        self._os.chmod(file, self._mode)
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, *args):
+        self.close()
+
+
+def open(file, flag='c', mode=0o666):
+    """Open the database file, filename, and return corresponding object.
+
+    The flag argument, used to control how the database is opened in the
+    other DBM implementations, supports only the semantics of 'c' and 'n'
+    values.  Other values will default to the semantics of 'c' value:
+    the database will always opened for update and will be created if it
+    does not exist.
+
+    The optional mode argument is the UNIX mode of the file, used only when
+    the database has to be created.  It defaults to octal code 0o666 (and
+    will be modified by the prevailing umask).
+
+    """
+
+    # Modify mode depending on the umask
+    try:
+        um = _os.umask(0)
+        _os.umask(um)
+    except AttributeError:
+        pass
+    else:
+        # Turn off any bits that are set in the umask
+        mode = mode & (~um)
+    if flag not in ('r', 'w', 'c', 'n'):
+        raise ValueError("Flag must be one of 'r', 'w', 'c', or 'n'")
+    return _Database(file, mode, flag=flag)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/gnu.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/gnu.py
new file mode 100644
index 0000000000000000000000000000000000000000..b07a1defffdf2fcc8532f52ed49751fb0733a1a7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/gnu.py
@@ -0,0 +1,3 @@
+"""Provide the _gdbm module as a dbm submodule."""
+
+from _gdbm import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/ndbm.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/ndbm.py
new file mode 100644
index 0000000000000000000000000000000000000000..23056a29ef2b6200c8bfd2b44fba832b6774a488
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/ndbm.py
@@ -0,0 +1,3 @@
+"""Provide the _dbm module as a dbm submodule."""
+
+from _dbm import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/sqlite3.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/sqlite3.py
new file mode 100644
index 0000000000000000000000000000000000000000..d0eed54e0f84c10ffdc68543079fd34dc7a56b06
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/dbm/sqlite3.py
@@ -0,0 +1,144 @@
+import os
+import sqlite3
+from pathlib import Path
+from contextlib import suppress, closing
+from collections.abc import MutableMapping
+
+BUILD_TABLE = """
+  CREATE TABLE IF NOT EXISTS Dict (
+    key BLOB UNIQUE NOT NULL,
+    value BLOB NOT NULL
+  )
+"""
+GET_SIZE = "SELECT COUNT (key) FROM Dict"
+LOOKUP_KEY = "SELECT value FROM Dict WHERE key = CAST(? AS BLOB)"
+STORE_KV = "REPLACE INTO Dict (key, value) VALUES (CAST(? AS BLOB), CAST(? AS BLOB))"
+DELETE_KEY = "DELETE FROM Dict WHERE key = CAST(? AS BLOB)"
+ITER_KEYS = "SELECT key FROM Dict"
+
+
+class error(OSError):
+    pass
+
+
+_ERR_CLOSED = "DBM object has already been closed"
+_ERR_REINIT = "DBM object does not support reinitialization"
+
+
+def _normalize_uri(path):
+    path = Path(path)
+    uri = path.absolute().as_uri()
+    while "//" in uri:
+        uri = uri.replace("//", "/")
+    return uri
+
+
+class _Database(MutableMapping):
+
+    def __init__(self, path, /, *, flag, mode):
+        if hasattr(self, "_cx"):
+            raise error(_ERR_REINIT)
+
+        path = os.fsdecode(path)
+        match flag:
+            case "r":
+                flag = "ro"
+            case "w":
+                flag = "rw"
+            case "c":
+                flag = "rwc"
+                Path(path).touch(mode=mode, exist_ok=True)
+            case "n":
+                flag = "rwc"
+                Path(path).unlink(missing_ok=True)
+                Path(path).touch(mode=mode)
+            case _:
+                raise ValueError("Flag must be one of 'r', 'w', 'c', or 'n', "
+                                 f"not {flag!r}")
+
+        # We use the URI format when opening the database.
+        uri = _normalize_uri(path)
+        uri = f"{uri}?mode={flag}"
+        if flag == "ro":
+            # Add immutable=1 to allow read-only SQLite access even if wal/shm missing
+            uri += "&immutable=1"
+
+        try:
+            self._cx = sqlite3.connect(uri, autocommit=True, uri=True)
+        except sqlite3.Error as exc:
+            raise error(str(exc))
+
+        if flag != "ro":
+            # This is an optimization only; it's ok if it fails.
+            with suppress(sqlite3.OperationalError):
+                self._cx.execute("PRAGMA journal_mode = wal")
+
+            if flag == "rwc":
+                self._execute(BUILD_TABLE)
+
+    def _execute(self, *args, **kwargs):
+        if not self._cx:
+            raise error(_ERR_CLOSED)
+        try:
+            return closing(self._cx.execute(*args, **kwargs))
+        except sqlite3.Error as exc:
+            raise error(str(exc))
+
+    def __len__(self):
+        with self._execute(GET_SIZE) as cu:
+            row = cu.fetchone()
+        return row[0]
+
+    def __getitem__(self, key):
+        with self._execute(LOOKUP_KEY, (key,)) as cu:
+            row = cu.fetchone()
+        if not row:
+            raise KeyError(key)
+        return row[0]
+
+    def __setitem__(self, key, value):
+        self._execute(STORE_KV, (key, value))
+
+    def __delitem__(self, key):
+        with self._execute(DELETE_KEY, (key,)) as cu:
+            if not cu.rowcount:
+                raise KeyError(key)
+
+    def __iter__(self):
+        try:
+            with self._execute(ITER_KEYS) as cu:
+                for row in cu:
+                    yield row[0]
+        except sqlite3.Error as exc:
+            raise error(str(exc))
+
+    def close(self):
+        if self._cx:
+            self._cx.close()
+            self._cx = None
+
+    def keys(self):
+        return list(super().keys())
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, *args):
+        self.close()
+
+
+def open(filename, /, flag="r", mode=0o666):
+    """Open a dbm.sqlite3 database and return the dbm object.
+
+    The 'filename' parameter is the name of the database file.
+
+    The optional 'flag' parameter can be one of ...:
+        'r' (default): open an existing database for read only access
+        'w': open an existing database for read/write access
+        'c': create a database if it does not exist; open for read/write access
+        'n': always create a new, empty database; open for read/write access
+
+    The optional 'mode' parameter is the Unix file access mode of the database;
+    only used when creating a new database. Default: 0o666.
+    """
+    return _Database(filename, flag=flag, mode=mode)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..6d597006e5eefe1a7e48bf632aa0971c0a23eb39
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/__init__.py
@@ -0,0 +1,61 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""A package for parsing, handling, and generating email messages."""
+
+__all__ = [
+    'base64mime',
+    'charset',
+    'encoders',
+    'errors',
+    'feedparser',
+    'generator',
+    'header',
+    'iterators',
+    'message',
+    'message_from_file',
+    'message_from_binary_file',
+    'message_from_string',
+    'message_from_bytes',
+    'mime',
+    'parser',
+    'quoprimime',
+    'utils',
+    ]
+
+
+# Some convenience routines.  Don't import Parser and Message as side-effects
+# of importing email since those cascadingly import most of the rest of the
+# email package.
+def message_from_string(s, *args, **kws):
+    """Parse a string into a Message object model.
+
+    Optional _class and strict are passed to the Parser constructor.
+    """
+    from email.parser import Parser
+    return Parser(*args, **kws).parsestr(s)
+
+def message_from_bytes(s, *args, **kws):
+    """Parse a bytes string into a Message object model.
+
+    Optional _class and strict are passed to the Parser constructor.
+    """
+    from email.parser import BytesParser
+    return BytesParser(*args, **kws).parsebytes(s)
+
+def message_from_file(fp, *args, **kws):
+    """Read a file and parse its contents into a Message object model.
+
+    Optional _class and strict are passed to the Parser constructor.
+    """
+    from email.parser import Parser
+    return Parser(*args, **kws).parse(fp)
+
+def message_from_binary_file(fp, *args, **kws):
+    """Read a binary file and parse its contents into a Message object model.
+
+    Optional _class and strict are passed to the Parser constructor.
+    """
+    from email.parser import BytesParser
+    return BytesParser(*args, **kws).parse(fp)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_encoded_words.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_encoded_words.py
new file mode 100644
index 0000000000000000000000000000000000000000..05a34a4c10523369712c7134a9f092d11cad562b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_encoded_words.py
@@ -0,0 +1,233 @@
+""" Routines for manipulating RFC2047 encoded words.
+
+This is currently a package-private API, but will be considered for promotion
+to a public API if there is demand.
+
+"""
+
+# An ecoded word looks like this:
+#
+#        =?charset[*lang]?cte?encoded_string?=
+#
+# for more information about charset see the charset module.  Here it is one
+# of the preferred MIME charset names (hopefully; you never know when parsing).
+# cte (Content Transfer Encoding) is either 'q' or 'b' (ignoring case).  In
+# theory other letters could be used for other encodings, but in practice this
+# (almost?) never happens.  There could be a public API for adding entries
+# to the CTE tables, but YAGNI for now.  'q' is Quoted Printable, 'b' is
+# Base64.  The meaning of encoded_string should be obvious.  'lang' is optional
+# as indicated by the brackets (they are not part of the syntax) but is almost
+# never encountered in practice.
+#
+# The general interface for a CTE decoder is that it takes the encoded_string
+# as its argument, and returns a tuple (cte_decoded_string, defects).  The
+# cte_decoded_string is the original binary that was encoded using the
+# specified cte.  'defects' is a list of MessageDefect instances indicating any
+# problems encountered during conversion.  'charset' and 'lang' are the
+# corresponding strings extracted from the EW, case preserved.
+#
+# The general interface for a CTE encoder is that it takes a binary sequence
+# as input and returns the cte_encoded_string, which is an ascii-only string.
+#
+# Each decoder must also supply a length function that takes the binary
+# sequence as its argument and returns the length of the resulting encoded
+# string.
+#
+# The main API functions for the module are decode, which calls the decoder
+# referenced by the cte specifier, and encode, which adds the appropriate
+# RFC 2047 "chrome" to the encoded string, and can optionally automatically
+# select the shortest possible encoding.  See their docstrings below for
+# details.
+
+import re
+import base64
+import binascii
+import functools
+from string import ascii_letters, digits
+from email import errors
+
+__all__ = ['decode_q',
+           'encode_q',
+           'decode_b',
+           'encode_b',
+           'len_q',
+           'len_b',
+           'decode',
+           'encode',
+           ]
+
+#
+# Quoted Printable
+#
+
+# regex based decoder.
+_q_byte_subber = functools.partial(re.compile(br'=([a-fA-F0-9]{2})').sub,
+        lambda m: bytes.fromhex(m.group(1).decode()))
+
+def decode_q(encoded):
+    encoded = encoded.replace(b'_', b' ')
+    return _q_byte_subber(encoded), []
+
+
+# dict mapping bytes to their encoded form
+class _QByteMap(dict):
+
+    safe = b'-!*+/' + ascii_letters.encode('ascii') + digits.encode('ascii')
+
+    def __missing__(self, key):
+        if key in self.safe:
+            self[key] = chr(key)
+        else:
+            self[key] = "={:02X}".format(key)
+        return self[key]
+
+_q_byte_map = _QByteMap()
+
+# In headers spaces are mapped to '_'.
+_q_byte_map[ord(' ')] = '_'
+
+def encode_q(bstring):
+    return ''.join(_q_byte_map[x] for x in bstring)
+
+def len_q(bstring):
+    return sum(len(_q_byte_map[x]) for x in bstring)
+
+
+#
+# Base64
+#
+
+def decode_b(encoded):
+    # First try encoding with validate=True, fixing the padding if needed.
+    # This will succeed only if encoded includes no invalid characters.
+    pad_err = len(encoded) % 4
+    missing_padding = b'==='[:4-pad_err] if pad_err else b''
+    try:
+        return (
+            base64.b64decode(encoded + missing_padding, validate=True),
+            [errors.InvalidBase64PaddingDefect()] if pad_err else [],
+        )
+    except binascii.Error:
+        # Since we had correct padding, this is likely an invalid char error.
+        #
+        # The non-alphabet characters are ignored as far as padding
+        # goes, but we don't know how many there are.  So try without adding
+        # padding to see if it works.
+        try:
+            return (
+                base64.b64decode(encoded, validate=False),
+                [errors.InvalidBase64CharactersDefect()],
+            )
+        except binascii.Error:
+            # Add as much padding as could possibly be necessary (extra padding
+            # is ignored).
+            try:
+                return (
+                    base64.b64decode(encoded + b'==', validate=False),
+                    [errors.InvalidBase64CharactersDefect(),
+                     errors.InvalidBase64PaddingDefect()],
+                )
+            except binascii.Error:
+                # This only happens when the encoded string's length is 1 more
+                # than a multiple of 4, which is invalid.
+                #
+                # bpo-27397: Just return the encoded string since there's no
+                # way to decode.
+                return encoded, [errors.InvalidBase64LengthDefect()]
+
+def encode_b(bstring):
+    return base64.b64encode(bstring).decode('ascii')
+
+def len_b(bstring):
+    groups_of_3, leftover = divmod(len(bstring), 3)
+    # 4 bytes out for each 3 bytes (or nonzero fraction thereof) in.
+    return groups_of_3 * 4 + (4 if leftover else 0)
+
+
+_cte_decoders = {
+    'q': decode_q,
+    'b': decode_b,
+    }
+
+def decode(ew):
+    """Decode encoded word and return (string, charset, lang, defects) tuple.
+
+    An RFC 2047/2243 encoded word has the form:
+
+        =?charset*lang?cte?encoded_string?=
+
+    where '*lang' may be omitted but the other parts may not be.
+
+    This function expects exactly such a string (that is, it does not check the
+    syntax and may raise errors if the string is not well formed), and returns
+    the encoded_string decoded first from its Content Transfer Encoding and
+    then from the resulting bytes into unicode using the specified charset.  If
+    the cte-decoded string does not successfully decode using the specified
+    character set, a defect is added to the defects list and the unknown octets
+    are replaced by the unicode 'unknown' character \\uFDFF.
+
+    The specified charset and language are returned.  The default for language,
+    which is rarely if ever encountered, is the empty string.
+
+    """
+    _, charset, cte, cte_string, _ = ew.split('?')
+    charset, _, lang = charset.partition('*')
+    cte = cte.lower()
+    # Recover the original bytes and do CTE decoding.
+    bstring = cte_string.encode('ascii', 'surrogateescape')
+    bstring, defects = _cte_decoders[cte](bstring)
+    # Turn the CTE decoded bytes into unicode.
+    try:
+        string = bstring.decode(charset)
+    except UnicodeDecodeError:
+        defects.append(errors.UndecodableBytesDefect("Encoded word "
+            f"contains bytes not decodable using {charset!r} charset"))
+        string = bstring.decode(charset, 'surrogateescape')
+    except (LookupError, UnicodeEncodeError):
+        string = bstring.decode('ascii', 'surrogateescape')
+        if charset.lower() != 'unknown-8bit':
+            defects.append(errors.CharsetError(f"Unknown charset {charset!r} "
+                f"in encoded word; decoded as unknown bytes"))
+    return string, charset, lang, defects
+
+
+_cte_encoders = {
+    'q': encode_q,
+    'b': encode_b,
+    }
+
+_cte_encode_length = {
+    'q': len_q,
+    'b': len_b,
+    }
+
+def encode(string, charset='utf-8', encoding=None, lang=''):
+    """Encode string using the CTE encoding that produces the shorter result.
+
+    Produces an RFC 2047/2243 encoded word of the form:
+
+        =?charset*lang?cte?encoded_string?=
+
+    where '*lang' is omitted unless the 'lang' parameter is given a value.
+    Optional argument charset (defaults to utf-8) specifies the charset to use
+    to encode the string to binary before CTE encoding it.  Optional argument
+    'encoding' is the cte specifier for the encoding that should be used ('q'
+    or 'b'); if it is None (the default) the encoding which produces the
+    shortest encoded sequence is used, except that 'q' is preferred if it is up
+    to five characters longer.  Optional argument 'lang' (default '') gives the
+    RFC 2243 language string to specify in the encoded word.
+
+    """
+    if charset == 'unknown-8bit':
+        bstring = string.encode('utf-8', 'surrogateescape')
+    else:
+        bstring = string.encode(charset)
+    if encoding is None:
+        qlen = _cte_encode_length['q'](bstring)
+        blen = _cte_encode_length['b'](bstring)
+        # Bias toward q.  5 is arbitrary.
+        encoding = 'q' if qlen - blen < 5 else 'b'
+    encoded = _cte_encoders[encoding](bstring)
+    if lang:
+        lang = '*' + lang
+    return "=?{}{}?{}?{}?=".format(charset, lang, encoding, encoded)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_header_value_parser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_header_value_parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..03fedd99539ed332eae290f6947bedcadcd5944f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_header_value_parser.py
@@ -0,0 +1,3146 @@
+"""Header value parser implementing various email-related RFC parsing rules.
+
+The parsing methods defined in this module implement various email related
+parsing rules.  Principal among them is RFC 5322, which is the followon
+to RFC 2822 and primarily a clarification of the former.  It also implements
+RFC 2047 encoded word decoding.
+
+RFC 5322 goes to considerable trouble to maintain backward compatibility with
+RFC 822 in the parse phase, while cleaning up the structure on the generation
+phase.  This parser supports correct RFC 5322 generation by tagging white space
+as folding white space only when folding is allowed in the non-obsolete rule
+sets.  Actually, the parser is even more generous when accepting input than RFC
+5322 mandates, following the spirit of Postel's Law, which RFC 5322 encourages.
+Where possible deviations from the standard are annotated on the 'defects'
+attribute of tokens that deviate.
+
+The general structure of the parser follows RFC 5322, and uses its terminology
+where there is a direct correspondence.  Where the implementation requires a
+somewhat different structure than that used by the formal grammar, new terms
+that mimic the closest existing terms are used.  Thus, it really helps to have
+a copy of RFC 5322 handy when studying this code.
+
+Input to the parser is a string that has already been unfolded according to
+RFC 5322 rules.  According to the RFC this unfolding is the very first step, and
+this parser leaves the unfolding step to a higher level message parser, which
+will have already detected the line breaks that need unfolding while
+determining the beginning and end of each header.
+
+The output of the parser is a TokenList object, which is a list subclass.  A
+TokenList is a recursive data structure.  The terminal nodes of the structure
+are Terminal objects, which are subclasses of str.  These do not correspond
+directly to terminal objects in the formal grammar, but are instead more
+practical higher level combinations of true terminals.
+
+All TokenList and Terminal objects have a 'value' attribute, which produces the
+semantically meaningful value of that part of the parse subtree.  The value of
+all whitespace tokens (no matter how many sub-tokens they may contain) is a
+single space, as per the RFC rules.  This includes 'CFWS', which is herein
+included in the general class of whitespace tokens.  There is one exception to
+the rule that whitespace tokens are collapsed into single spaces in values: in
+the value of a 'bare-quoted-string' (a quoted-string with no leading or
+trailing whitespace), any whitespace that appeared between the quotation marks
+is preserved in the returned value.  Note that in all Terminal strings quoted
+pairs are turned into their unquoted values.
+
+All TokenList and Terminal objects also have a string value, which attempts to
+be a "canonical" representation of the RFC-compliant form of the substring that
+produced the parsed subtree, including minimal use of quoted pair quoting.
+Whitespace runs are not collapsed.
+
+Comment tokens also have a 'content' attribute providing the string found
+between the parens (including any nested comments) with whitespace preserved.
+
+All TokenList and Terminal objects have a 'defects' attribute which is a
+possibly empty list all of the defects found while creating the token.  Defects
+may appear on any token in the tree, and a composite list of all defects in the
+subtree is available through the 'all_defects' attribute of any node.  (For
+Terminal notes x.defects == x.all_defects.)
+
+Each object in a parse tree is called a 'token', and each has a 'token_type'
+attribute that gives the name from the RFC 5322 grammar that it represents.
+Not all RFC 5322 nodes are produced, and there is one non-RFC 5322 node that
+may be produced: 'ptext'.  A 'ptext' is a string of printable ascii characters.
+It is returned in place of lists of (ctext/quoted-pair) and
+(qtext/quoted-pair).
+
+XXX: provide complete list of token types.
+"""
+
+import re
+import sys
+import urllib   # For urllib.parse.unquote
+from string import hexdigits
+from operator import itemgetter
+from email import _encoded_words as _ew
+from email import errors
+from email import utils
+
+#
+# Useful constants and functions
+#
+
+_WSP = ' \t'
+WSP = set(_WSP)
+CFWS_LEADER = WSP | set('(')
+SPECIALS = set(r'()<>@,:;.\"[]')
+ATOM_ENDS = SPECIALS | WSP
+DOT_ATOM_ENDS = ATOM_ENDS - set('.')
+# '.', '"', and '(' do not end phrases in order to support obs-phrase
+PHRASE_ENDS = SPECIALS - set('."(')
+TSPECIALS = (SPECIALS | set('/?=')) - set('.')
+TOKEN_ENDS = TSPECIALS | WSP
+ASPECIALS = TSPECIALS | set("*'%")
+ATTRIBUTE_ENDS = ASPECIALS | WSP
+EXTENDED_ATTRIBUTE_ENDS = ATTRIBUTE_ENDS - set('%')
+NLSET = {'\n', '\r'}
+SPECIALSNL = SPECIALS | NLSET
+
+
+def make_quoted_pairs(value):
+    """Escape dquote and backslash for use within a quoted-string."""
+    return str(value).replace('\\', '\\\\').replace('"', '\\"')
+
+
+def make_parenthesis_pairs(value):
+    """Escape parenthesis and backslash for use within a comment."""
+    return str(value).replace('\\', '\\\\') \
+        .replace('(', '\\(').replace(')', '\\)')
+
+
+def quote_string(value):
+    escaped = make_quoted_pairs(value)
+    return f'"{escaped}"'
+
+
+# Match a RFC 2047 word, looks like =?utf-8?q?someword?=
+rfc2047_matcher = re.compile(r'''
+   =\?            # literal =?
+   [^?]*          # charset
+   \?             # literal ?
+   [qQbB]         # literal 'q' or 'b', case insensitive
+   \?             # literal ?
+  .*?             # encoded word
+  \?=             # literal ?=
+''', re.VERBOSE | re.MULTILINE)
+
+
+#
+# TokenList and its subclasses
+#
+
+class TokenList(list):
+
+    token_type = None
+    syntactic_break = True
+    ew_combine_allowed = True
+
+    def __init__(self, *args, **kw):
+        super().__init__(*args, **kw)
+        self.defects = []
+
+    def __str__(self):
+        return ''.join(str(x) for x in self)
+
+    def __repr__(self):
+        return '{}({})'.format(self.__class__.__name__,
+                             super().__repr__())
+
+    @property
+    def value(self):
+        return ''.join(x.value for x in self if x.value)
+
+    @property
+    def all_defects(self):
+        return sum((x.all_defects for x in self), self.defects)
+
+    def startswith_fws(self):
+        return self[0].startswith_fws()
+
+    @property
+    def as_ew_allowed(self):
+        """True if all top level tokens of this part may be RFC2047 encoded."""
+        return all(part.as_ew_allowed for part in self)
+
+    @property
+    def comments(self):
+        comments = []
+        for token in self:
+            comments.extend(token.comments)
+        return comments
+
+    def fold(self, *, policy):
+        return _refold_parse_tree(self, policy=policy)
+
+    def pprint(self, indent=''):
+        print(self.ppstr(indent=indent))
+
+    def ppstr(self, indent=''):
+        return '\n'.join(self._pp(indent=indent))
+
+    def _pp(self, indent=''):
+        yield '{}{}/{}('.format(
+            indent,
+            self.__class__.__name__,
+            self.token_type)
+        for token in self:
+            if not hasattr(token, '_pp'):
+                yield (indent + '    !! invalid element in token '
+                                        'list: {!r}'.format(token))
+            else:
+                yield from token._pp(indent+'    ')
+        if self.defects:
+            extra = ' Defects: {}'.format(self.defects)
+        else:
+            extra = ''
+        yield '{}){}'.format(indent, extra)
+
+
+class WhiteSpaceTokenList(TokenList):
+
+    @property
+    def value(self):
+        return ' '
+
+    @property
+    def comments(self):
+        return [x.content for x in self if x.token_type=='comment']
+
+
+class UnstructuredTokenList(TokenList):
+    token_type = 'unstructured'
+
+
+class Phrase(TokenList):
+    token_type = 'phrase'
+
+class Word(TokenList):
+    token_type = 'word'
+
+
+class CFWSList(WhiteSpaceTokenList):
+    token_type = 'cfws'
+
+
+class Atom(TokenList):
+    token_type = 'atom'
+
+
+class Token(TokenList):
+    token_type = 'token'
+    encode_as_ew = False
+
+
+class EncodedWord(TokenList):
+    token_type = 'encoded-word'
+    cte = None
+    charset = None
+    lang = None
+
+
+class QuotedString(TokenList):
+
+    token_type = 'quoted-string'
+
+    @property
+    def content(self):
+        for x in self:
+            if x.token_type == 'bare-quoted-string':
+                return x.value
+
+    @property
+    def quoted_value(self):
+        res = []
+        for x in self:
+            if x.token_type == 'bare-quoted-string':
+                res.append(str(x))
+            else:
+                res.append(x.value)
+        return ''.join(res)
+
+    @property
+    def stripped_value(self):
+        for token in self:
+            if token.token_type == 'bare-quoted-string':
+                return token.value
+
+
+class BareQuotedString(QuotedString):
+
+    token_type = 'bare-quoted-string'
+
+    def __str__(self):
+        return quote_string(''.join(str(x) for x in self))
+
+    @property
+    def value(self):
+        return ''.join(str(x) for x in self)
+
+
+class Comment(WhiteSpaceTokenList):
+
+    token_type = 'comment'
+
+    def __str__(self):
+        return ''.join(sum([
+                            ["("],
+                            [self.quote(x) for x in self],
+                            [")"],
+                            ], []))
+
+    def quote(self, value):
+        if value.token_type == 'comment':
+            return str(value)
+        return str(value).replace('\\', '\\\\').replace(
+                                  '(', r'\(').replace(
+                                  ')', r'\)')
+
+    @property
+    def content(self):
+        return ''.join(str(x) for x in self)
+
+    @property
+    def comments(self):
+        return [self.content]
+
+class AddressList(TokenList):
+
+    token_type = 'address-list'
+
+    @property
+    def addresses(self):
+        return [x for x in self if x.token_type=='address']
+
+    @property
+    def mailboxes(self):
+        return sum((x.mailboxes
+                    for x in self if x.token_type=='address'), [])
+
+    @property
+    def all_mailboxes(self):
+        return sum((x.all_mailboxes
+                    for x in self if x.token_type=='address'), [])
+
+
+class Address(TokenList):
+
+    token_type = 'address'
+
+    @property
+    def display_name(self):
+        if self[0].token_type == 'group':
+            return self[0].display_name
+
+    @property
+    def mailboxes(self):
+        if self[0].token_type == 'mailbox':
+            return [self[0]]
+        elif self[0].token_type == 'invalid-mailbox':
+            return []
+        return self[0].mailboxes
+
+    @property
+    def all_mailboxes(self):
+        if self[0].token_type == 'mailbox':
+            return [self[0]]
+        elif self[0].token_type == 'invalid-mailbox':
+            return [self[0]]
+        return self[0].all_mailboxes
+
+class MailboxList(TokenList):
+
+    token_type = 'mailbox-list'
+
+    @property
+    def mailboxes(self):
+        return [x for x in self if x.token_type=='mailbox']
+
+    @property
+    def all_mailboxes(self):
+        return [x for x in self
+            if x.token_type in ('mailbox', 'invalid-mailbox')]
+
+
+class GroupList(TokenList):
+
+    token_type = 'group-list'
+
+    @property
+    def mailboxes(self):
+        if not self or self[0].token_type != 'mailbox-list':
+            return []
+        return self[0].mailboxes
+
+    @property
+    def all_mailboxes(self):
+        if not self or self[0].token_type != 'mailbox-list':
+            return []
+        return self[0].all_mailboxes
+
+
+class Group(TokenList):
+
+    token_type = "group"
+
+    @property
+    def mailboxes(self):
+        if self[2].token_type != 'group-list':
+            return []
+        return self[2].mailboxes
+
+    @property
+    def all_mailboxes(self):
+        if self[2].token_type != 'group-list':
+            return []
+        return self[2].all_mailboxes
+
+    @property
+    def display_name(self):
+        return self[0].display_name
+
+
+class NameAddr(TokenList):
+
+    token_type = 'name-addr'
+
+    @property
+    def display_name(self):
+        if len(self) == 1:
+            return None
+        return self[0].display_name
+
+    @property
+    def local_part(self):
+        return self[-1].local_part
+
+    @property
+    def domain(self):
+        return self[-1].domain
+
+    @property
+    def route(self):
+        return self[-1].route
+
+    @property
+    def addr_spec(self):
+        return self[-1].addr_spec
+
+
+class AngleAddr(TokenList):
+
+    token_type = 'angle-addr'
+
+    @property
+    def local_part(self):
+        for x in self:
+            if x.token_type == 'addr-spec':
+                return x.local_part
+
+    @property
+    def domain(self):
+        for x in self:
+            if x.token_type == 'addr-spec':
+                return x.domain
+
+    @property
+    def route(self):
+        for x in self:
+            if x.token_type == 'obs-route':
+                return x.domains
+
+    @property
+    def addr_spec(self):
+        for x in self:
+            if x.token_type == 'addr-spec':
+                if x.local_part:
+                    return x.addr_spec
+                else:
+                    return quote_string(x.local_part) + x.addr_spec
+        else:
+            return '<>'
+
+
+class ObsRoute(TokenList):
+
+    token_type = 'obs-route'
+
+    @property
+    def domains(self):
+        return [x.domain for x in self if x.token_type == 'domain']
+
+
+class Mailbox(TokenList):
+
+    token_type = 'mailbox'
+
+    @property
+    def display_name(self):
+        if self[0].token_type == 'name-addr':
+            return self[0].display_name
+
+    @property
+    def local_part(self):
+        return self[0].local_part
+
+    @property
+    def domain(self):
+        return self[0].domain
+
+    @property
+    def route(self):
+        if self[0].token_type == 'name-addr':
+            return self[0].route
+
+    @property
+    def addr_spec(self):
+        return self[0].addr_spec
+
+
+class InvalidMailbox(TokenList):
+
+    token_type = 'invalid-mailbox'
+
+    @property
+    def display_name(self):
+        return None
+
+    local_part = domain = route = addr_spec = display_name
+
+
+class Domain(TokenList):
+
+    token_type = 'domain'
+    as_ew_allowed = False
+
+    @property
+    def domain(self):
+        return ''.join(super().value.split())
+
+
+class DotAtom(TokenList):
+    token_type = 'dot-atom'
+
+
+class DotAtomText(TokenList):
+    token_type = 'dot-atom-text'
+    as_ew_allowed = True
+
+
+class NoFoldLiteral(TokenList):
+    token_type = 'no-fold-literal'
+    as_ew_allowed = False
+
+
+class AddrSpec(TokenList):
+
+    token_type = 'addr-spec'
+    as_ew_allowed = False
+
+    @property
+    def local_part(self):
+        return self[0].local_part
+
+    @property
+    def domain(self):
+        if len(self) < 3:
+            return None
+        return self[-1].domain
+
+    @property
+    def value(self):
+        if len(self) < 3:
+            return self[0].value
+        return self[0].value.rstrip()+self[1].value+self[2].value.lstrip()
+
+    @property
+    def addr_spec(self):
+        nameset = set(self.local_part)
+        if len(nameset) > len(nameset-DOT_ATOM_ENDS):
+            lp = quote_string(self.local_part)
+        else:
+            lp = self.local_part
+        if self.domain is not None:
+            return lp + '@' + self.domain
+        return lp
+
+
+class ObsLocalPart(TokenList):
+
+    token_type = 'obs-local-part'
+    as_ew_allowed = False
+
+
+class DisplayName(Phrase):
+
+    token_type = 'display-name'
+    ew_combine_allowed = False
+
+    @property
+    def display_name(self):
+        res = TokenList(self)
+        if len(res) == 0:
+            return res.value
+        if res[0].token_type == 'cfws':
+            res.pop(0)
+        else:
+            if (isinstance(res[0], TokenList) and
+                    res[0][0].token_type == 'cfws'):
+                res[0] = TokenList(res[0][1:])
+        if res[-1].token_type == 'cfws':
+            res.pop()
+        else:
+            if (isinstance(res[-1], TokenList) and
+                    res[-1][-1].token_type == 'cfws'):
+                res[-1] = TokenList(res[-1][:-1])
+        return res.value
+
+    @property
+    def value(self):
+        quote = False
+        if self.defects:
+            quote = True
+        else:
+            for x in self:
+                if x.token_type == 'quoted-string':
+                    quote = True
+        if len(self) != 0 and quote:
+            pre = post = ''
+            if (self[0].token_type == 'cfws' or
+                isinstance(self[0], TokenList) and
+                self[0][0].token_type == 'cfws'):
+                pre = ' '
+            if (self[-1].token_type == 'cfws' or
+                isinstance(self[-1], TokenList) and
+                self[-1][-1].token_type == 'cfws'):
+                post = ' '
+            return pre+quote_string(self.display_name)+post
+        else:
+            return super().value
+
+
+class LocalPart(TokenList):
+
+    token_type = 'local-part'
+    as_ew_allowed = False
+
+    @property
+    def value(self):
+        if self[0].token_type == "quoted-string":
+            return self[0].quoted_value
+        else:
+            return self[0].value
+
+    @property
+    def local_part(self):
+        # Strip whitespace from front, back, and around dots.
+        res = [DOT]
+        last = DOT
+        last_is_tl = False
+        for tok in self[0] + [DOT]:
+            if tok.token_type == 'cfws':
+                continue
+            if (last_is_tl and tok.token_type == 'dot' and
+                    last[-1].token_type == 'cfws'):
+                res[-1] = TokenList(last[:-1])
+            is_tl = isinstance(tok, TokenList)
+            if (is_tl and last.token_type == 'dot' and
+                    tok[0].token_type == 'cfws'):
+                res.append(TokenList(tok[1:]))
+            else:
+                res.append(tok)
+            last = res[-1]
+            last_is_tl = is_tl
+        res = TokenList(res[1:-1])
+        return res.value
+
+
+class DomainLiteral(TokenList):
+
+    token_type = 'domain-literal'
+    as_ew_allowed = False
+
+    @property
+    def domain(self):
+        return ''.join(super().value.split())
+
+    @property
+    def ip(self):
+        for x in self:
+            if x.token_type == 'ptext':
+                return x.value
+
+
+class MIMEVersion(TokenList):
+
+    token_type = 'mime-version'
+    major = None
+    minor = None
+
+
+class Parameter(TokenList):
+
+    token_type = 'parameter'
+    sectioned = False
+    extended = False
+    charset = 'us-ascii'
+
+    @property
+    def section_number(self):
+        # Because the first token, the attribute (name) eats CFWS, the second
+        # token is always the section if there is one.
+        return self[1].number if self.sectioned else 0
+
+    @property
+    def param_value(self):
+        # This is part of the "handle quoted extended parameters" hack.
+        for token in self:
+            if token.token_type == 'value':
+                return token.stripped_value
+            if token.token_type == 'quoted-string':
+                for token in token:
+                    if token.token_type == 'bare-quoted-string':
+                        for token in token:
+                            if token.token_type == 'value':
+                                return token.stripped_value
+        return ''
+
+
+class InvalidParameter(Parameter):
+
+    token_type = 'invalid-parameter'
+
+
+class Attribute(TokenList):
+
+    token_type = 'attribute'
+
+    @property
+    def stripped_value(self):
+        for token in self:
+            if token.token_type.endswith('attrtext'):
+                return token.value
+
+class Section(TokenList):
+
+    token_type = 'section'
+    number = None
+
+
+class Value(TokenList):
+
+    token_type = 'value'
+
+    @property
+    def stripped_value(self):
+        token = self[0]
+        if token.token_type == 'cfws':
+            token = self[1]
+        if token.token_type.endswith(
+                ('quoted-string', 'attribute', 'extended-attribute')):
+            return token.stripped_value
+        return self.value
+
+
+class MimeParameters(TokenList):
+
+    token_type = 'mime-parameters'
+    syntactic_break = False
+
+    @property
+    def params(self):
+        # The RFC specifically states that the ordering of parameters is not
+        # guaranteed and may be reordered by the transport layer.  So we have
+        # to assume the RFC 2231 pieces can come in any order.  However, we
+        # output them in the order that we first see a given name, which gives
+        # us a stable __str__.
+        params = {}  # Using order preserving dict from Python 3.7+
+        for token in self:
+            if not token.token_type.endswith('parameter'):
+                continue
+            if token[0].token_type != 'attribute':
+                continue
+            name = token[0].value.strip()
+            if name not in params:
+                params[name] = []
+            params[name].append((token.section_number, token))
+        for name, parts in params.items():
+            parts = sorted(parts, key=itemgetter(0))
+            first_param = parts[0][1]
+            charset = first_param.charset
+            # Our arbitrary error recovery is to ignore duplicate parameters,
+            # to use appearance order if there are duplicate rfc 2231 parts,
+            # and to ignore gaps.  This mimics the error recovery of get_param.
+            if not first_param.extended and len(parts) > 1:
+                if parts[1][0] == 0:
+                    parts[1][1].defects.append(errors.InvalidHeaderDefect(
+                        'duplicate parameter name; duplicate(s) ignored'))
+                    parts = parts[:1]
+                # Else assume the *0* was missing...note that this is different
+                # from get_param, but we registered a defect for this earlier.
+            value_parts = []
+            i = 0
+            for section_number, param in parts:
+                if section_number != i:
+                    # We could get fancier here and look for a complete
+                    # duplicate extended parameter and ignore the second one
+                    # seen.  But we're not doing that.  The old code didn't.
+                    if not param.extended:
+                        param.defects.append(errors.InvalidHeaderDefect(
+                            'duplicate parameter name; duplicate ignored'))
+                        continue
+                    else:
+                        param.defects.append(errors.InvalidHeaderDefect(
+                            "inconsistent RFC2231 parameter numbering"))
+                i += 1
+                value = param.param_value
+                if param.extended:
+                    try:
+                        value = urllib.parse.unquote_to_bytes(value)
+                    except UnicodeEncodeError:
+                        # source had surrogate escaped bytes.  What we do now
+                        # is a bit of an open question.  I'm not sure this is
+                        # the best choice, but it is what the old algorithm did
+                        value = urllib.parse.unquote(value, encoding='latin-1')
+                    else:
+                        try:
+                            value = value.decode(charset, 'surrogateescape')
+                        except (LookupError, UnicodeEncodeError):
+                            # XXX: there should really be a custom defect for
+                            # unknown character set to make it easy to find,
+                            # because otherwise unknown charset is a silent
+                            # failure.
+                            value = value.decode('us-ascii', 'surrogateescape')
+                        if utils._has_surrogates(value):
+                            param.defects.append(errors.UndecodableBytesDefect())
+                value_parts.append(value)
+            value = ''.join(value_parts)
+            yield name, value
+
+    def __str__(self):
+        params = []
+        for name, value in self.params:
+            if value:
+                params.append('{}={}'.format(name, quote_string(value)))
+            else:
+                params.append(name)
+        params = '; '.join(params)
+        return ' ' + params if params else ''
+
+
+class ParameterizedHeaderValue(TokenList):
+
+    # Set this false so that the value doesn't wind up on a new line even
+    # if it and the parameters would fit there but not on the first line.
+    syntactic_break = False
+
+    @property
+    def params(self):
+        for token in reversed(self):
+            if token.token_type == 'mime-parameters':
+                return token.params
+        return {}
+
+
+class ContentType(ParameterizedHeaderValue):
+    token_type = 'content-type'
+    as_ew_allowed = False
+    maintype = 'text'
+    subtype = 'plain'
+
+
+class ContentDisposition(ParameterizedHeaderValue):
+    token_type = 'content-disposition'
+    as_ew_allowed = False
+    content_disposition = None
+
+
+class ContentTransferEncoding(TokenList):
+    token_type = 'content-transfer-encoding'
+    as_ew_allowed = False
+    cte = '7bit'
+
+
+class HeaderLabel(TokenList):
+    token_type = 'header-label'
+    as_ew_allowed = False
+
+
+class MsgID(TokenList):
+    token_type = 'msg-id'
+    as_ew_allowed = False
+
+    def fold(self, policy):
+        # message-id tokens may not be folded.
+        return str(self) + policy.linesep
+
+
+class MessageID(MsgID):
+    token_type = 'message-id'
+
+
+class InvalidMessageID(MessageID):
+    token_type = 'invalid-message-id'
+
+class MessageIDList(TokenList):
+    token_type = 'message-id-list'
+
+    @property
+    def message_ids(self):
+        return [x for x in self if x.token_type=='msg-id']
+
+class Header(TokenList):
+    token_type = 'header'
+
+
+#
+# Terminal classes and instances
+#
+
+class Terminal(str):
+
+    as_ew_allowed = True
+    ew_combine_allowed = True
+    syntactic_break = True
+
+    def __new__(cls, value, token_type):
+        self = super().__new__(cls, value)
+        self.token_type = token_type
+        self.defects = []
+        return self
+
+    def __repr__(self):
+        return "{}({})".format(self.__class__.__name__, super().__repr__())
+
+    def pprint(self):
+        print(self.__class__.__name__ + '/' + self.token_type)
+
+    @property
+    def all_defects(self):
+        return list(self.defects)
+
+    def _pp(self, indent=''):
+        return ["{}{}/{}({}){}".format(
+            indent,
+            self.__class__.__name__,
+            self.token_type,
+            super().__repr__(),
+            '' if not self.defects else ' {}'.format(self.defects),
+            )]
+
+    def pop_trailing_ws(self):
+        # This terminates the recursion.
+        return None
+
+    @property
+    def comments(self):
+        return []
+
+    def __getnewargs__(self):
+        return(str(self), self.token_type)
+
+
+class WhiteSpaceTerminal(Terminal):
+
+    @property
+    def value(self):
+        return ' '
+
+    def startswith_fws(self):
+        return self and self[0] in WSP
+
+
+class ValueTerminal(Terminal):
+
+    @property
+    def value(self):
+        return self
+
+    def startswith_fws(self):
+        return False
+
+
+class EWWhiteSpaceTerminal(WhiteSpaceTerminal):
+
+    @property
+    def value(self):
+        return ''
+
+    def __str__(self):
+        return ''
+
+
+class _InvalidEwError(errors.HeaderParseError):
+    """Invalid encoded word found while parsing headers."""
+
+
+# XXX these need to become classes and used as instances so
+# that a program can't change them in a parse tree and screw
+# up other parse trees.  Maybe should have  tests for that, too.
+DOT = ValueTerminal('.', 'dot')
+ListSeparator = ValueTerminal(',', 'list-separator')
+ListSeparator.as_ew_allowed = False
+ListSeparator.syntactic_break = False
+RouteComponentMarker = ValueTerminal('@', 'route-component-marker')
+
+#
+# Parser
+#
+
+# Parse strings according to RFC822/2047/2822/5322 rules.
+#
+# This is a stateless parser.  Each get_XXX function accepts a string and
+# returns either a Terminal or a TokenList representing the RFC object named
+# by the method and a string containing the remaining unparsed characters
+# from the input.  Thus a parser method consumes the next syntactic construct
+# of a given type and returns a token representing the construct plus the
+# unparsed remainder of the input string.
+#
+# For example, if the first element of a structured header is a 'phrase',
+# then:
+#
+#     phrase, value = get_phrase(value)
+#
+# returns the complete phrase from the start of the string value, plus any
+# characters left in the string after the phrase is removed.
+
+_wsp_splitter = re.compile(r'([{}]+)'.format(''.join(WSP))).split
+_non_atom_end_matcher = re.compile(r"[^{}]+".format(
+    re.escape(''.join(ATOM_ENDS)))).match
+_non_printable_finder = re.compile(r"[\x00-\x20\x7F]").findall
+_non_token_end_matcher = re.compile(r"[^{}]+".format(
+    re.escape(''.join(TOKEN_ENDS)))).match
+_non_attribute_end_matcher = re.compile(r"[^{}]+".format(
+    re.escape(''.join(ATTRIBUTE_ENDS)))).match
+_non_extended_attribute_end_matcher = re.compile(r"[^{}]+".format(
+    re.escape(''.join(EXTENDED_ATTRIBUTE_ENDS)))).match
+
+def _validate_xtext(xtext):
+    """If input token contains ASCII non-printables, register a defect."""
+
+    non_printables = _non_printable_finder(xtext)
+    if non_printables:
+        xtext.defects.append(errors.NonPrintableDefect(non_printables))
+    if utils._has_surrogates(xtext):
+        xtext.defects.append(errors.UndecodableBytesDefect(
+            "Non-ASCII characters found in header token"))
+
+def _get_ptext_to_endchars(value, endchars):
+    """Scan printables/quoted-pairs until endchars and return unquoted ptext.
+
+    This function turns a run of qcontent, ccontent-without-comments, or
+    dtext-with-quoted-printables into a single string by unquoting any
+    quoted printables.  It returns the string, the remaining value, and
+    a flag that is True iff there were any quoted printables decoded.
+
+    """
+    if not value:
+        return '', '', False
+    fragment, *remainder = _wsp_splitter(value, 1)
+    vchars = []
+    escape = False
+    had_qp = False
+    for pos in range(len(fragment)):
+        if fragment[pos] == '\\':
+            if escape:
+                escape = False
+                had_qp = True
+            else:
+                escape = True
+                continue
+        if escape:
+            escape = False
+        elif fragment[pos] in endchars:
+            break
+        vchars.append(fragment[pos])
+    else:
+        pos = pos + 1
+    return ''.join(vchars), ''.join([fragment[pos:]] + remainder), had_qp
+
+def get_fws(value):
+    """FWS = 1*WSP
+
+    This isn't the RFC definition.  We're using fws to represent tokens where
+    folding can be done, but when we are parsing the *un*folding has already
+    been done so we don't need to watch out for CRLF.
+
+    """
+    newvalue = value.lstrip()
+    fws = WhiteSpaceTerminal(value[:len(value)-len(newvalue)], 'fws')
+    return fws, newvalue
+
+def get_encoded_word(value, terminal_type='vtext'):
+    """ encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
+
+    """
+    ew = EncodedWord()
+    if not value.startswith('=?'):
+        raise errors.HeaderParseError(
+            "expected encoded word but found {}".format(value))
+    tok, *remainder = value[2:].split('?=', 1)
+    if tok == value[2:]:
+        raise errors.HeaderParseError(
+            "expected encoded word but found {}".format(value))
+    remstr = ''.join(remainder)
+    if (len(remstr) > 1 and
+        remstr[0] in hexdigits and
+        remstr[1] in hexdigits and
+        tok.count('?') < 2):
+        # The ? after the CTE was followed by an encoded word escape (=XX).
+        rest, *remainder = remstr.split('?=', 1)
+        tok = tok + '?=' + rest
+    if len(tok.split()) > 1:
+        ew.defects.append(errors.InvalidHeaderDefect(
+            "whitespace inside encoded word"))
+    ew.cte = value
+    value = ''.join(remainder)
+    try:
+        text, charset, lang, defects = _ew.decode('=?' + tok + '?=')
+    except (ValueError, KeyError):
+        raise _InvalidEwError(
+            "encoded word format invalid: '{}'".format(ew.cte))
+    ew.charset = charset
+    ew.lang = lang
+    ew.defects.extend(defects)
+    while text:
+        if text[0] in WSP:
+            token, text = get_fws(text)
+            ew.append(token)
+            continue
+        chars, *remainder = _wsp_splitter(text, 1)
+        vtext = ValueTerminal(chars, terminal_type)
+        _validate_xtext(vtext)
+        ew.append(vtext)
+        text = ''.join(remainder)
+    # Encoded words should be followed by a WS
+    if value and value[0] not in WSP:
+        ew.defects.append(errors.InvalidHeaderDefect(
+            "missing trailing whitespace after encoded-word"))
+    return ew, value
+
+def get_unstructured(value):
+    """unstructured = (*([FWS] vchar) *WSP) / obs-unstruct
+       obs-unstruct = *((*LF *CR *(obs-utext) *LF *CR)) / FWS)
+       obs-utext = %d0 / obs-NO-WS-CTL / LF / CR
+
+       obs-NO-WS-CTL is control characters except WSP/CR/LF.
+
+    So, basically, we have printable runs, plus control characters or nulls in
+    the obsolete syntax, separated by whitespace.  Since RFC 2047 uses the
+    obsolete syntax in its specification, but requires whitespace on either
+    side of the encoded words, I can see no reason to need to separate the
+    non-printable-non-whitespace from the printable runs if they occur, so we
+    parse this into xtext tokens separated by WSP tokens.
+
+    Because an 'unstructured' value must by definition constitute the entire
+    value, this 'get' routine does not return a remaining value, only the
+    parsed TokenList.
+
+    """
+    # XXX: but what about bare CR and LF?  They might signal the start or
+    # end of an encoded word.  YAGNI for now, since our current parsers
+    # will never send us strings with bare CR or LF.
+
+    unstructured = UnstructuredTokenList()
+    while value:
+        if value[0] in WSP:
+            token, value = get_fws(value)
+            unstructured.append(token)
+            continue
+        valid_ew = True
+        if value.startswith('=?'):
+            try:
+                token, value = get_encoded_word(value, 'utext')
+            except _InvalidEwError:
+                valid_ew = False
+            except errors.HeaderParseError:
+                # XXX: Need to figure out how to register defects when
+                # appropriate here.
+                pass
+            else:
+                have_ws = True
+                if len(unstructured) > 0:
+                    if unstructured[-1].token_type != 'fws':
+                        unstructured.defects.append(errors.InvalidHeaderDefect(
+                            "missing whitespace before encoded word"))
+                        have_ws = False
+                if have_ws and len(unstructured) > 1:
+                    if unstructured[-2].token_type == 'encoded-word':
+                        unstructured[-1] = EWWhiteSpaceTerminal(
+                            unstructured[-1], 'fws')
+                unstructured.append(token)
+                continue
+        tok, *remainder = _wsp_splitter(value, 1)
+        # Split in the middle of an atom if there is a rfc2047 encoded word
+        # which does not have WSP on both sides. The defect will be registered
+        # the next time through the loop.
+        # This needs to only be performed when the encoded word is valid;
+        # otherwise, performing it on an invalid encoded word can cause
+        # the parser to go in an infinite loop.
+        if valid_ew and rfc2047_matcher.search(tok):
+            tok, *remainder = value.partition('=?')
+        vtext = ValueTerminal(tok, 'utext')
+        _validate_xtext(vtext)
+        unstructured.append(vtext)
+        value = ''.join(remainder)
+    return unstructured
+
+def get_qp_ctext(value):
+    r"""ctext = <printable ascii except \ ( )>
+
+    This is not the RFC ctext, since we are handling nested comments in comment
+    and unquoting quoted-pairs here.  We allow anything except the '()'
+    characters, but if we find any ASCII other than the RFC defined printable
+    ASCII, a NonPrintableDefect is added to the token's defects list.  Since
+    quoted pairs are converted to their unquoted values, what is returned is
+    a 'ptext' token.  In this case it is a WhiteSpaceTerminal, so it's value
+    is ' '.
+
+    """
+    ptext, value, _ = _get_ptext_to_endchars(value, '()')
+    ptext = WhiteSpaceTerminal(ptext, 'ptext')
+    _validate_xtext(ptext)
+    return ptext, value
+
+def get_qcontent(value):
+    """qcontent = qtext / quoted-pair
+
+    We allow anything except the DQUOTE character, but if we find any ASCII
+    other than the RFC defined printable ASCII, a NonPrintableDefect is
+    added to the token's defects list.  Any quoted pairs are converted to their
+    unquoted values, so what is returned is a 'ptext' token.  In this case it
+    is a ValueTerminal.
+
+    """
+    ptext, value, _ = _get_ptext_to_endchars(value, '"')
+    ptext = ValueTerminal(ptext, 'ptext')
+    _validate_xtext(ptext)
+    return ptext, value
+
+def get_atext(value):
+    """atext = <matches _atext_matcher>
+
+    We allow any non-ATOM_ENDS in atext, but add an InvalidATextDefect to
+    the token's defects list if we find non-atext characters.
+    """
+    m = _non_atom_end_matcher(value)
+    if not m:
+        raise errors.HeaderParseError(
+            "expected atext but found '{}'".format(value))
+    atext = m.group()
+    value = value[len(atext):]
+    atext = ValueTerminal(atext, 'atext')
+    _validate_xtext(atext)
+    return atext, value
+
+def get_bare_quoted_string(value):
+    """bare-quoted-string = DQUOTE *([FWS] qcontent) [FWS] DQUOTE
+
+    A quoted-string without the leading or trailing white space.  Its
+    value is the text between the quote marks, with whitespace
+    preserved and quoted pairs decoded.
+    """
+    if not value or value[0] != '"':
+        raise errors.HeaderParseError(
+            "expected '\"' but found '{}'".format(value))
+    bare_quoted_string = BareQuotedString()
+    value = value[1:]
+    if value and value[0] == '"':
+        token, value = get_qcontent(value)
+        bare_quoted_string.append(token)
+    while value and value[0] != '"':
+        if value[0] in WSP:
+            token, value = get_fws(value)
+        elif value[:2] == '=?':
+            valid_ew = False
+            try:
+                token, value = get_encoded_word(value)
+                bare_quoted_string.defects.append(errors.InvalidHeaderDefect(
+                    "encoded word inside quoted string"))
+                valid_ew = True
+            except errors.HeaderParseError:
+                token, value = get_qcontent(value)
+            # Collapse the whitespace between two encoded words that occur in a
+            # bare-quoted-string.
+            if valid_ew and len(bare_quoted_string) > 1:
+                if (bare_quoted_string[-1].token_type == 'fws' and
+                        bare_quoted_string[-2].token_type == 'encoded-word'):
+                    bare_quoted_string[-1] = EWWhiteSpaceTerminal(
+                        bare_quoted_string[-1], 'fws')
+        else:
+            token, value = get_qcontent(value)
+        bare_quoted_string.append(token)
+    if not value:
+        bare_quoted_string.defects.append(errors.InvalidHeaderDefect(
+            "end of header inside quoted string"))
+        return bare_quoted_string, value
+    return bare_quoted_string, value[1:]
+
+def get_comment(value):
+    """comment = "(" *([FWS] ccontent) [FWS] ")"
+       ccontent = ctext / quoted-pair / comment
+
+    We handle nested comments here, and quoted-pair in our qp-ctext routine.
+    """
+    if value and value[0] != '(':
+        raise errors.HeaderParseError(
+            "expected '(' but found '{}'".format(value))
+    comment = Comment()
+    value = value[1:]
+    while value and value[0] != ")":
+        if value[0] in WSP:
+            token, value = get_fws(value)
+        elif value[0] == '(':
+            token, value = get_comment(value)
+        else:
+            token, value = get_qp_ctext(value)
+        comment.append(token)
+    if not value:
+        comment.defects.append(errors.InvalidHeaderDefect(
+            "end of header inside comment"))
+        return comment, value
+    return comment, value[1:]
+
+def get_cfws(value):
+    """CFWS = (1*([FWS] comment) [FWS]) / FWS
+
+    """
+    cfws = CFWSList()
+    while value and value[0] in CFWS_LEADER:
+        if value[0] in WSP:
+            token, value = get_fws(value)
+        else:
+            token, value = get_comment(value)
+        cfws.append(token)
+    return cfws, value
+
+def get_quoted_string(value):
+    """quoted-string = [CFWS] <bare-quoted-string> [CFWS]
+
+    'bare-quoted-string' is an intermediate class defined by this
+    parser and not by the RFC grammar.  It is the quoted string
+    without any attached CFWS.
+    """
+    quoted_string = QuotedString()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        quoted_string.append(token)
+    token, value = get_bare_quoted_string(value)
+    quoted_string.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        quoted_string.append(token)
+    return quoted_string, value
+
+def get_atom(value):
+    """atom = [CFWS] 1*atext [CFWS]
+
+    An atom could be an rfc2047 encoded word.
+    """
+    atom = Atom()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        atom.append(token)
+    if value and value[0] in ATOM_ENDS:
+        raise errors.HeaderParseError(
+            "expected atom but found '{}'".format(value))
+    if value.startswith('=?'):
+        try:
+            token, value = get_encoded_word(value)
+        except errors.HeaderParseError:
+            # XXX: need to figure out how to register defects when
+            # appropriate here.
+            token, value = get_atext(value)
+    else:
+        token, value = get_atext(value)
+    atom.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        atom.append(token)
+    return atom, value
+
+def get_dot_atom_text(value):
+    """ dot-text = 1*atext *("." 1*atext)
+
+    """
+    dot_atom_text = DotAtomText()
+    if not value or value[0] in ATOM_ENDS:
+        raise errors.HeaderParseError("expected atom at a start of "
+            "dot-atom-text but found '{}'".format(value))
+    while value and value[0] not in ATOM_ENDS:
+        token, value = get_atext(value)
+        dot_atom_text.append(token)
+        if value and value[0] == '.':
+            dot_atom_text.append(DOT)
+            value = value[1:]
+    if dot_atom_text[-1] is DOT:
+        raise errors.HeaderParseError("expected atom at end of dot-atom-text "
+            "but found '{}'".format('.'+value))
+    return dot_atom_text, value
+
+def get_dot_atom(value):
+    """ dot-atom = [CFWS] dot-atom-text [CFWS]
+
+    Any place we can have a dot atom, we could instead have an rfc2047 encoded
+    word.
+    """
+    dot_atom = DotAtom()
+    if value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        dot_atom.append(token)
+    if value.startswith('=?'):
+        try:
+            token, value = get_encoded_word(value)
+        except errors.HeaderParseError:
+            # XXX: need to figure out how to register defects when
+            # appropriate here.
+            token, value = get_dot_atom_text(value)
+    else:
+        token, value = get_dot_atom_text(value)
+    dot_atom.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        dot_atom.append(token)
+    return dot_atom, value
+
+def get_word(value):
+    """word = atom / quoted-string
+
+    Either atom or quoted-string may start with CFWS.  We have to peel off this
+    CFWS first to determine which type of word to parse.  Afterward we splice
+    the leading CFWS, if any, into the parsed sub-token.
+
+    If neither an atom or a quoted-string is found before the next special, a
+    HeaderParseError is raised.
+
+    The token returned is either an Atom or a QuotedString, as appropriate.
+    This means the 'word' level of the formal grammar is not represented in the
+    parse tree; this is because having that extra layer when manipulating the
+    parse tree is more confusing than it is helpful.
+
+    """
+    if value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+    else:
+        leader = None
+    if not value:
+        raise errors.HeaderParseError(
+            "Expected 'atom' or 'quoted-string' but found nothing.")
+    if value[0]=='"':
+        token, value = get_quoted_string(value)
+    elif value[0] in SPECIALS:
+        raise errors.HeaderParseError("Expected 'atom' or 'quoted-string' "
+                                      "but found '{}'".format(value))
+    else:
+        token, value = get_atom(value)
+    if leader is not None:
+        token[:0] = [leader]
+    return token, value
+
+def get_phrase(value):
+    """ phrase = 1*word / obs-phrase
+        obs-phrase = word *(word / "." / CFWS)
+
+    This means a phrase can be a sequence of words, periods, and CFWS in any
+    order as long as it starts with at least one word.  If anything other than
+    words is detected, an ObsoleteHeaderDefect is added to the token's defect
+    list.  We also accept a phrase that starts with CFWS followed by a dot;
+    this is registered as an InvalidHeaderDefect, since it is not supported by
+    even the obsolete grammar.
+
+    """
+    phrase = Phrase()
+    try:
+        token, value = get_word(value)
+        phrase.append(token)
+    except errors.HeaderParseError:
+        phrase.defects.append(errors.InvalidHeaderDefect(
+            "phrase does not start with word"))
+    while value and value[0] not in PHRASE_ENDS:
+        if value[0]=='.':
+            phrase.append(DOT)
+            phrase.defects.append(errors.ObsoleteHeaderDefect(
+                "period in 'phrase'"))
+            value = value[1:]
+        else:
+            try:
+                token, value = get_word(value)
+            except errors.HeaderParseError:
+                if value[0] in CFWS_LEADER:
+                    token, value = get_cfws(value)
+                    phrase.defects.append(errors.ObsoleteHeaderDefect(
+                        "comment found without atom"))
+                else:
+                    raise
+            phrase.append(token)
+    return phrase, value
+
+def get_local_part(value):
+    """ local-part = dot-atom / quoted-string / obs-local-part
+
+    """
+    local_part = LocalPart()
+    leader = None
+    if value and value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+    if not value:
+        raise errors.HeaderParseError(
+            "expected local-part but found '{}'".format(value))
+    try:
+        token, value = get_dot_atom(value)
+    except errors.HeaderParseError:
+        try:
+            token, value = get_word(value)
+        except errors.HeaderParseError:
+            if value[0] != '\\' and value[0] in PHRASE_ENDS:
+                raise
+            token = TokenList()
+    if leader is not None:
+        token[:0] = [leader]
+    local_part.append(token)
+    if value and (value[0]=='\\' or value[0] not in PHRASE_ENDS):
+        obs_local_part, value = get_obs_local_part(str(local_part) + value)
+        if obs_local_part.token_type == 'invalid-obs-local-part':
+            local_part.defects.append(errors.InvalidHeaderDefect(
+                "local-part is not dot-atom, quoted-string, or obs-local-part"))
+        else:
+            local_part.defects.append(errors.ObsoleteHeaderDefect(
+                "local-part is not a dot-atom (contains CFWS)"))
+        local_part[0] = obs_local_part
+    try:
+        local_part.value.encode('ascii')
+    except UnicodeEncodeError:
+        local_part.defects.append(errors.NonASCIILocalPartDefect(
+                "local-part contains non-ASCII characters)"))
+    return local_part, value
+
+def get_obs_local_part(value):
+    """ obs-local-part = word *("." word)
+    """
+    obs_local_part = ObsLocalPart()
+    last_non_ws_was_dot = False
+    while value and (value[0]=='\\' or value[0] not in PHRASE_ENDS):
+        if value[0] == '.':
+            if last_non_ws_was_dot:
+                obs_local_part.defects.append(errors.InvalidHeaderDefect(
+                    "invalid repeated '.'"))
+            obs_local_part.append(DOT)
+            last_non_ws_was_dot = True
+            value = value[1:]
+            continue
+        elif value[0]=='\\':
+            obs_local_part.append(ValueTerminal(value[0],
+                                                'misplaced-special'))
+            value = value[1:]
+            obs_local_part.defects.append(errors.InvalidHeaderDefect(
+                "'\\' character outside of quoted-string/ccontent"))
+            last_non_ws_was_dot = False
+            continue
+        if obs_local_part and obs_local_part[-1].token_type != 'dot':
+            obs_local_part.defects.append(errors.InvalidHeaderDefect(
+                "missing '.' between words"))
+        try:
+            token, value = get_word(value)
+            last_non_ws_was_dot = False
+        except errors.HeaderParseError:
+            if value[0] not in CFWS_LEADER:
+                raise
+            token, value = get_cfws(value)
+        obs_local_part.append(token)
+    if not obs_local_part:
+        raise errors.HeaderParseError(
+            "expected obs-local-part but found '{}'".format(value))
+    if (obs_local_part[0].token_type == 'dot' or
+            obs_local_part[0].token_type=='cfws' and
+            len(obs_local_part) > 1 and
+            obs_local_part[1].token_type=='dot'):
+        obs_local_part.defects.append(errors.InvalidHeaderDefect(
+            "Invalid leading '.' in local part"))
+    if (obs_local_part[-1].token_type == 'dot' or
+            obs_local_part[-1].token_type=='cfws' and
+            len(obs_local_part) > 1 and
+            obs_local_part[-2].token_type=='dot'):
+        obs_local_part.defects.append(errors.InvalidHeaderDefect(
+            "Invalid trailing '.' in local part"))
+    if obs_local_part.defects:
+        obs_local_part.token_type = 'invalid-obs-local-part'
+    return obs_local_part, value
+
+def get_dtext(value):
+    r""" dtext = <printable ascii except \ [ ]> / obs-dtext
+        obs-dtext = obs-NO-WS-CTL / quoted-pair
+
+    We allow anything except the excluded characters, but if we find any
+    ASCII other than the RFC defined printable ASCII, a NonPrintableDefect is
+    added to the token's defects list.  Quoted pairs are converted to their
+    unquoted values, so what is returned is a ptext token, in this case a
+    ValueTerminal.  If there were quoted-printables, an ObsoleteHeaderDefect is
+    added to the returned token's defect list.
+
+    """
+    ptext, value, had_qp = _get_ptext_to_endchars(value, '[]')
+    ptext = ValueTerminal(ptext, 'ptext')
+    if had_qp:
+        ptext.defects.append(errors.ObsoleteHeaderDefect(
+            "quoted printable found in domain-literal"))
+    _validate_xtext(ptext)
+    return ptext, value
+
+def _check_for_early_dl_end(value, domain_literal):
+    if value:
+        return False
+    domain_literal.defects.append(errors.InvalidHeaderDefect(
+        "end of input inside domain-literal"))
+    domain_literal.append(ValueTerminal(']', 'domain-literal-end'))
+    return True
+
+def get_domain_literal(value):
+    """ domain-literal = [CFWS] "[" *([FWS] dtext) [FWS] "]" [CFWS]
+
+    """
+    domain_literal = DomainLiteral()
+    if value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        domain_literal.append(token)
+    if not value:
+        raise errors.HeaderParseError("expected domain-literal")
+    if value[0] != '[':
+        raise errors.HeaderParseError("expected '[' at start of domain-literal "
+                "but found '{}'".format(value))
+    value = value[1:]
+    domain_literal.append(ValueTerminal('[', 'domain-literal-start'))
+    if _check_for_early_dl_end(value, domain_literal):
+        return domain_literal, value
+    if value[0] in WSP:
+        token, value = get_fws(value)
+        domain_literal.append(token)
+    token, value = get_dtext(value)
+    domain_literal.append(token)
+    if _check_for_early_dl_end(value, domain_literal):
+        return domain_literal, value
+    if value[0] in WSP:
+        token, value = get_fws(value)
+        domain_literal.append(token)
+    if _check_for_early_dl_end(value, domain_literal):
+        return domain_literal, value
+    if value[0] != ']':
+        raise errors.HeaderParseError("expected ']' at end of domain-literal "
+                "but found '{}'".format(value))
+    domain_literal.append(ValueTerminal(']', 'domain-literal-end'))
+    value = value[1:]
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        domain_literal.append(token)
+    return domain_literal, value
+
+def get_domain(value):
+    """ domain = dot-atom / domain-literal / obs-domain
+        obs-domain = atom *("." atom))
+
+    """
+    domain = Domain()
+    leader = None
+    if value and value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+    if not value:
+        raise errors.HeaderParseError(
+            "expected domain but found '{}'".format(value))
+    if value[0] == '[':
+        token, value = get_domain_literal(value)
+        if leader is not None:
+            token[:0] = [leader]
+        domain.append(token)
+        return domain, value
+    try:
+        token, value = get_dot_atom(value)
+    except errors.HeaderParseError:
+        token, value = get_atom(value)
+    if value and value[0] == '@':
+        raise errors.HeaderParseError('Invalid Domain')
+    if leader is not None:
+        token[:0] = [leader]
+    domain.append(token)
+    if value and value[0] == '.':
+        domain.defects.append(errors.ObsoleteHeaderDefect(
+            "domain is not a dot-atom (contains CFWS)"))
+        if domain[0].token_type == 'dot-atom':
+            domain[:] = domain[0]
+        while value and value[0] == '.':
+            domain.append(DOT)
+            token, value = get_atom(value[1:])
+            domain.append(token)
+    return domain, value
+
+def get_addr_spec(value):
+    """ addr-spec = local-part "@" domain
+
+    """
+    addr_spec = AddrSpec()
+    token, value = get_local_part(value)
+    addr_spec.append(token)
+    if not value or value[0] != '@':
+        addr_spec.defects.append(errors.InvalidHeaderDefect(
+            "addr-spec local part with no domain"))
+        return addr_spec, value
+    addr_spec.append(ValueTerminal('@', 'address-at-symbol'))
+    token, value = get_domain(value[1:])
+    addr_spec.append(token)
+    return addr_spec, value
+
+def get_obs_route(value):
+    """ obs-route = obs-domain-list ":"
+        obs-domain-list = *(CFWS / ",") "@" domain *("," [CFWS] ["@" domain])
+
+        Returns an obs-route token with the appropriate sub-tokens (that is,
+        there is no obs-domain-list in the parse tree).
+    """
+    obs_route = ObsRoute()
+    while value and (value[0]==',' or value[0] in CFWS_LEADER):
+        if value[0] in CFWS_LEADER:
+            token, value = get_cfws(value)
+            obs_route.append(token)
+        elif value[0] == ',':
+            obs_route.append(ListSeparator)
+            value = value[1:]
+    if not value or value[0] != '@':
+        raise errors.HeaderParseError(
+            "expected obs-route domain but found '{}'".format(value))
+    obs_route.append(RouteComponentMarker)
+    token, value = get_domain(value[1:])
+    obs_route.append(token)
+    while value and value[0]==',':
+        obs_route.append(ListSeparator)
+        value = value[1:]
+        if not value:
+            break
+        if value[0] in CFWS_LEADER:
+            token, value = get_cfws(value)
+            obs_route.append(token)
+        if not value:
+            break
+        if value[0] == '@':
+            obs_route.append(RouteComponentMarker)
+            token, value = get_domain(value[1:])
+            obs_route.append(token)
+    if not value:
+        raise errors.HeaderParseError("end of header while parsing obs-route")
+    if value[0] != ':':
+        raise errors.HeaderParseError( "expected ':' marking end of "
+            "obs-route but found '{}'".format(value))
+    obs_route.append(ValueTerminal(':', 'end-of-obs-route-marker'))
+    return obs_route, value[1:]
+
+def get_angle_addr(value):
+    """ angle-addr = [CFWS] "<" addr-spec ">" [CFWS] / obs-angle-addr
+        obs-angle-addr = [CFWS] "<" obs-route addr-spec ">" [CFWS]
+
+    """
+    angle_addr = AngleAddr()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        angle_addr.append(token)
+    if not value or value[0] != '<':
+        raise errors.HeaderParseError(
+            "expected angle-addr but found '{}'".format(value))
+    angle_addr.append(ValueTerminal('<', 'angle-addr-start'))
+    value = value[1:]
+    # Although it is not legal per RFC5322, SMTP uses '<>' in certain
+    # circumstances.
+    if value and value[0] == '>':
+        angle_addr.append(ValueTerminal('>', 'angle-addr-end'))
+        angle_addr.defects.append(errors.InvalidHeaderDefect(
+            "null addr-spec in angle-addr"))
+        value = value[1:]
+        return angle_addr, value
+    try:
+        token, value = get_addr_spec(value)
+    except errors.HeaderParseError:
+        try:
+            token, value = get_obs_route(value)
+            angle_addr.defects.append(errors.ObsoleteHeaderDefect(
+                "obsolete route specification in angle-addr"))
+        except errors.HeaderParseError:
+            raise errors.HeaderParseError(
+                "expected addr-spec or obs-route but found '{}'".format(value))
+        angle_addr.append(token)
+        token, value = get_addr_spec(value)
+    angle_addr.append(token)
+    if value and value[0] == '>':
+        value = value[1:]
+    else:
+        angle_addr.defects.append(errors.InvalidHeaderDefect(
+            "missing trailing '>' on angle-addr"))
+    angle_addr.append(ValueTerminal('>', 'angle-addr-end'))
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        angle_addr.append(token)
+    return angle_addr, value
+
+def get_display_name(value):
+    """ display-name = phrase
+
+    Because this is simply a name-rule, we don't return a display-name
+    token containing a phrase, but rather a display-name token with
+    the content of the phrase.
+
+    """
+    display_name = DisplayName()
+    token, value = get_phrase(value)
+    display_name.extend(token[:])
+    display_name.defects = token.defects[:]
+    return display_name, value
+
+
+def get_name_addr(value):
+    """ name-addr = [display-name] angle-addr
+
+    """
+    name_addr = NameAddr()
+    # Both the optional display name and the angle-addr can start with cfws.
+    leader = None
+    if not value:
+        raise errors.HeaderParseError(
+            "expected name-addr but found '{}'".format(value))
+    if value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+        if not value:
+            raise errors.HeaderParseError(
+                "expected name-addr but found '{}'".format(leader))
+    if value[0] != '<':
+        if value[0] in PHRASE_ENDS:
+            raise errors.HeaderParseError(
+                "expected name-addr but found '{}'".format(value))
+        token, value = get_display_name(value)
+        if not value:
+            raise errors.HeaderParseError(
+                "expected name-addr but found '{}'".format(token))
+        if leader is not None:
+            if isinstance(token[0], TokenList):
+                token[0][:0] = [leader]
+            else:
+                token[:0] = [leader]
+            leader = None
+        name_addr.append(token)
+    token, value = get_angle_addr(value)
+    if leader is not None:
+        token[:0] = [leader]
+    name_addr.append(token)
+    return name_addr, value
+
+def get_mailbox(value):
+    """ mailbox = name-addr / addr-spec
+
+    """
+    # The only way to figure out if we are dealing with a name-addr or an
+    # addr-spec is to try parsing each one.
+    mailbox = Mailbox()
+    try:
+        token, value = get_name_addr(value)
+    except errors.HeaderParseError:
+        try:
+            token, value = get_addr_spec(value)
+        except errors.HeaderParseError:
+            raise errors.HeaderParseError(
+                "expected mailbox but found '{}'".format(value))
+    if any(isinstance(x, errors.InvalidHeaderDefect)
+                       for x in token.all_defects):
+        mailbox.token_type = 'invalid-mailbox'
+    mailbox.append(token)
+    return mailbox, value
+
+def get_invalid_mailbox(value, endchars):
+    """ Read everything up to one of the chars in endchars.
+
+    This is outside the formal grammar.  The InvalidMailbox TokenList that is
+    returned acts like a Mailbox, but the data attributes are None.
+
+    """
+    invalid_mailbox = InvalidMailbox()
+    while value and value[0] not in endchars:
+        if value[0] in PHRASE_ENDS:
+            invalid_mailbox.append(ValueTerminal(value[0],
+                                                 'misplaced-special'))
+            value = value[1:]
+        else:
+            token, value = get_phrase(value)
+            invalid_mailbox.append(token)
+    return invalid_mailbox, value
+
+def get_mailbox_list(value):
+    """ mailbox-list = (mailbox *("," mailbox)) / obs-mbox-list
+        obs-mbox-list = *([CFWS] ",") mailbox *("," [mailbox / CFWS])
+
+    For this routine we go outside the formal grammar in order to improve error
+    handling.  We recognize the end of the mailbox list only at the end of the
+    value or at a ';' (the group terminator).  This is so that we can turn
+    invalid mailboxes into InvalidMailbox tokens and continue parsing any
+    remaining valid mailboxes.  We also allow all mailbox entries to be null,
+    and this condition is handled appropriately at a higher level.
+
+    """
+    mailbox_list = MailboxList()
+    while value and value[0] != ';':
+        try:
+            token, value = get_mailbox(value)
+            mailbox_list.append(token)
+        except errors.HeaderParseError:
+            leader = None
+            if value[0] in CFWS_LEADER:
+                leader, value = get_cfws(value)
+                if not value or value[0] in ',;':
+                    mailbox_list.append(leader)
+                    mailbox_list.defects.append(errors.ObsoleteHeaderDefect(
+                        "empty element in mailbox-list"))
+                else:
+                    token, value = get_invalid_mailbox(value, ',;')
+                    if leader is not None:
+                        token[:0] = [leader]
+                    mailbox_list.append(token)
+                    mailbox_list.defects.append(errors.InvalidHeaderDefect(
+                        "invalid mailbox in mailbox-list"))
+            elif value[0] == ',':
+                mailbox_list.defects.append(errors.ObsoleteHeaderDefect(
+                    "empty element in mailbox-list"))
+            else:
+                token, value = get_invalid_mailbox(value, ',;')
+                if leader is not None:
+                    token[:0] = [leader]
+                mailbox_list.append(token)
+                mailbox_list.defects.append(errors.InvalidHeaderDefect(
+                    "invalid mailbox in mailbox-list"))
+        if value and value[0] not in ',;':
+            # Crap after mailbox; treat it as an invalid mailbox.
+            # The mailbox info will still be available.
+            mailbox = mailbox_list[-1]
+            mailbox.token_type = 'invalid-mailbox'
+            token, value = get_invalid_mailbox(value, ',;')
+            mailbox.extend(token)
+            mailbox_list.defects.append(errors.InvalidHeaderDefect(
+                "invalid mailbox in mailbox-list"))
+        if value and value[0] == ',':
+            mailbox_list.append(ListSeparator)
+            value = value[1:]
+    return mailbox_list, value
+
+
+def get_group_list(value):
+    """ group-list = mailbox-list / CFWS / obs-group-list
+        obs-group-list = 1*([CFWS] ",") [CFWS]
+
+    """
+    group_list = GroupList()
+    if not value:
+        group_list.defects.append(errors.InvalidHeaderDefect(
+            "end of header before group-list"))
+        return group_list, value
+    leader = None
+    if value and value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+        if not value:
+            # This should never happen in email parsing, since CFWS-only is a
+            # legal alternative to group-list in a group, which is the only
+            # place group-list appears.
+            group_list.defects.append(errors.InvalidHeaderDefect(
+                "end of header in group-list"))
+            group_list.append(leader)
+            return group_list, value
+        if value[0] == ';':
+            group_list.append(leader)
+            return group_list, value
+    token, value = get_mailbox_list(value)
+    if len(token.all_mailboxes)==0:
+        if leader is not None:
+            group_list.append(leader)
+        group_list.extend(token)
+        group_list.defects.append(errors.ObsoleteHeaderDefect(
+            "group-list with empty entries"))
+        return group_list, value
+    if leader is not None:
+        token[:0] = [leader]
+    group_list.append(token)
+    return group_list, value
+
+def get_group(value):
+    """ group = display-name ":" [group-list] ";" [CFWS]
+
+    """
+    group = Group()
+    token, value = get_display_name(value)
+    if not value or value[0] != ':':
+        raise errors.HeaderParseError("expected ':' at end of group "
+            "display name but found '{}'".format(value))
+    group.append(token)
+    group.append(ValueTerminal(':', 'group-display-name-terminator'))
+    value = value[1:]
+    if value and value[0] == ';':
+        group.append(ValueTerminal(';', 'group-terminator'))
+        return group, value[1:]
+    token, value = get_group_list(value)
+    group.append(token)
+    if not value:
+        group.defects.append(errors.InvalidHeaderDefect(
+            "end of header in group"))
+    elif value[0] != ';':
+        raise errors.HeaderParseError(
+            "expected ';' at end of group but found {}".format(value))
+    group.append(ValueTerminal(';', 'group-terminator'))
+    value = value[1:]
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        group.append(token)
+    return group, value
+
+def get_address(value):
+    """ address = mailbox / group
+
+    Note that counter-intuitively, an address can be either a single address or
+    a list of addresses (a group).  This is why the returned Address object has
+    a 'mailboxes' attribute which treats a single address as a list of length
+    one.  When you need to differentiate between to two cases, extract the single
+    element, which is either a mailbox or a group token.
+
+    """
+    # The formal grammar isn't very helpful when parsing an address.  mailbox
+    # and group, especially when allowing for obsolete forms, start off very
+    # similarly.  It is only when you reach one of @, <, or : that you know
+    # what you've got.  So, we try each one in turn, starting with the more
+    # likely of the two.  We could perhaps make this more efficient by looking
+    # for a phrase and then branching based on the next character, but that
+    # would be a premature optimization.
+    address = Address()
+    try:
+        token, value = get_group(value)
+    except errors.HeaderParseError:
+        try:
+            token, value = get_mailbox(value)
+        except errors.HeaderParseError:
+            raise errors.HeaderParseError(
+                "expected address but found '{}'".format(value))
+    address.append(token)
+    return address, value
+
+def get_address_list(value):
+    """ address_list = (address *("," address)) / obs-addr-list
+        obs-addr-list = *([CFWS] ",") address *("," [address / CFWS])
+
+    We depart from the formal grammar here by continuing to parse until the end
+    of the input, assuming the input to be entirely composed of an
+    address-list.  This is always true in email parsing, and allows us
+    to skip invalid addresses to parse additional valid ones.
+
+    """
+    address_list = AddressList()
+    while value:
+        try:
+            token, value = get_address(value)
+            address_list.append(token)
+        except errors.HeaderParseError:
+            leader = None
+            if value[0] in CFWS_LEADER:
+                leader, value = get_cfws(value)
+                if not value or value[0] == ',':
+                    address_list.append(leader)
+                    address_list.defects.append(errors.ObsoleteHeaderDefect(
+                        "address-list entry with no content"))
+                else:
+                    token, value = get_invalid_mailbox(value, ',')
+                    if leader is not None:
+                        token[:0] = [leader]
+                    address_list.append(Address([token]))
+                    address_list.defects.append(errors.InvalidHeaderDefect(
+                        "invalid address in address-list"))
+            elif value[0] == ',':
+                address_list.defects.append(errors.ObsoleteHeaderDefect(
+                    "empty element in address-list"))
+            else:
+                token, value = get_invalid_mailbox(value, ',')
+                if leader is not None:
+                    token[:0] = [leader]
+                address_list.append(Address([token]))
+                address_list.defects.append(errors.InvalidHeaderDefect(
+                    "invalid address in address-list"))
+        if value and value[0] != ',':
+            # Crap after address; treat it as an invalid mailbox.
+            # The mailbox info will still be available.
+            mailbox = address_list[-1][0]
+            mailbox.token_type = 'invalid-mailbox'
+            token, value = get_invalid_mailbox(value, ',')
+            mailbox.extend(token)
+            address_list.defects.append(errors.InvalidHeaderDefect(
+                "invalid address in address-list"))
+        if value:  # Must be a , at this point.
+            address_list.append(ListSeparator)
+            value = value[1:]
+    return address_list, value
+
+
+def get_no_fold_literal(value):
+    """ no-fold-literal = "[" *dtext "]"
+    """
+    no_fold_literal = NoFoldLiteral()
+    if not value:
+        raise errors.HeaderParseError(
+            "expected no-fold-literal but found '{}'".format(value))
+    if value[0] != '[':
+        raise errors.HeaderParseError(
+            "expected '[' at the start of no-fold-literal "
+            "but found '{}'".format(value))
+    no_fold_literal.append(ValueTerminal('[', 'no-fold-literal-start'))
+    value = value[1:]
+    token, value = get_dtext(value)
+    no_fold_literal.append(token)
+    if not value or value[0] != ']':
+        raise errors.HeaderParseError(
+            "expected ']' at the end of no-fold-literal "
+            "but found '{}'".format(value))
+    no_fold_literal.append(ValueTerminal(']', 'no-fold-literal-end'))
+    return no_fold_literal, value[1:]
+
+def get_msg_id(value):
+    """msg-id = [CFWS] "<" id-left '@' id-right  ">" [CFWS]
+       id-left = dot-atom-text / obs-id-left
+       id-right = dot-atom-text / no-fold-literal / obs-id-right
+       no-fold-literal = "[" *dtext "]"
+    """
+    msg_id = MsgID()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        msg_id.append(token)
+    if not value or value[0] != '<':
+        raise errors.HeaderParseError(
+            "expected msg-id but found '{}'".format(value))
+    msg_id.append(ValueTerminal('<', 'msg-id-start'))
+    value = value[1:]
+    # Parse id-left.
+    try:
+        token, value = get_dot_atom_text(value)
+    except errors.HeaderParseError:
+        try:
+            # obs-id-left is same as local-part of add-spec.
+            token, value = get_obs_local_part(value)
+            msg_id.defects.append(errors.ObsoleteHeaderDefect(
+                "obsolete id-left in msg-id"))
+        except errors.HeaderParseError:
+            raise errors.HeaderParseError(
+                "expected dot-atom-text or obs-id-left"
+                " but found '{}'".format(value))
+    msg_id.append(token)
+    if not value or value[0] != '@':
+        msg_id.defects.append(errors.InvalidHeaderDefect(
+            "msg-id with no id-right"))
+        # Even though there is no id-right, if the local part
+        # ends with `>` let's just parse it too and return
+        # along with the defect.
+        if value and value[0] == '>':
+            msg_id.append(ValueTerminal('>', 'msg-id-end'))
+            value = value[1:]
+        return msg_id, value
+    msg_id.append(ValueTerminal('@', 'address-at-symbol'))
+    value = value[1:]
+    # Parse id-right.
+    try:
+        token, value = get_dot_atom_text(value)
+    except errors.HeaderParseError:
+        try:
+            token, value = get_no_fold_literal(value)
+        except errors.HeaderParseError:
+            try:
+                token, value = get_domain(value)
+                msg_id.defects.append(errors.ObsoleteHeaderDefect(
+                    "obsolete id-right in msg-id"))
+            except errors.HeaderParseError:
+                raise errors.HeaderParseError(
+                    "expected dot-atom-text, no-fold-literal or obs-id-right"
+                    " but found '{}'".format(value))
+    msg_id.append(token)
+    if value and value[0] == '>':
+        value = value[1:]
+    else:
+        msg_id.defects.append(errors.InvalidHeaderDefect(
+            "missing trailing '>' on msg-id"))
+    msg_id.append(ValueTerminal('>', 'msg-id-end'))
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        msg_id.append(token)
+    return msg_id, value
+
+
+def parse_message_id(value):
+    """message-id      =   "Message-ID:" msg-id CRLF
+    """
+    message_id = MessageID()
+    try:
+        token, value = get_msg_id(value)
+        message_id.append(token)
+    except errors.HeaderParseError as ex:
+        token = get_unstructured(value)
+        message_id = InvalidMessageID(token)
+        message_id.defects.append(
+            errors.InvalidHeaderDefect("Invalid msg-id: {!r}".format(ex)))
+    else:
+        # Value after parsing a valid msg_id should be None.
+        if value:
+            message_id.defects.append(errors.InvalidHeaderDefect(
+                "Unexpected {!r}".format(value)))
+
+    return message_id
+
+def parse_message_ids(value):
+    """in-reply-to     =   "In-Reply-To:" 1*msg-id CRLF
+       references      =   "References:" 1*msg-id CRLF
+    """
+    message_id_list = MessageIDList()
+    while value:
+        if value[0] == ',':
+            # message id list separated with commas - this is invalid,
+            # but happens rather frequently in the wild
+            message_id_list.defects.append(
+                errors.InvalidHeaderDefect("comma in msg-id list"))
+            message_id_list.append(
+                WhiteSpaceTerminal(' ', 'invalid-comma-replacement'))
+            value = value[1:]
+            continue
+        try:
+            token, value = get_msg_id(value)
+            message_id_list.append(token)
+        except errors.HeaderParseError as ex:
+            token = get_unstructured(value)
+            message_id_list.append(InvalidMessageID(token))
+            message_id_list.defects.append(
+                errors.InvalidHeaderDefect("Invalid msg-id: {!r}".format(ex)))
+            break
+    return message_id_list
+
+#
+# XXX: As I begin to add additional header parsers, I'm realizing we probably
+# have two level of parser routines: the get_XXX methods that get a token in
+# the grammar, and parse_XXX methods that parse an entire field value.  So
+# get_address_list above should really be a parse_ method, as probably should
+# be get_unstructured.
+#
+
+def parse_mime_version(value):
+    """ mime-version = [CFWS] 1*digit [CFWS] "." [CFWS] 1*digit [CFWS]
+
+    """
+    # The [CFWS] is implicit in the RFC 2045 BNF.
+    # XXX: This routine is a bit verbose, should factor out a get_int method.
+    mime_version = MIMEVersion()
+    if not value:
+        mime_version.defects.append(errors.HeaderMissingRequiredValue(
+            "Missing MIME version number (eg: 1.0)"))
+        return mime_version
+    if value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mime_version.append(token)
+        if not value:
+            mime_version.defects.append(errors.HeaderMissingRequiredValue(
+                "Expected MIME version number but found only CFWS"))
+    digits = ''
+    while value and value[0] != '.' and value[0] not in CFWS_LEADER:
+        digits += value[0]
+        value = value[1:]
+    if not digits.isdigit():
+        mime_version.defects.append(errors.InvalidHeaderDefect(
+            "Expected MIME major version number but found {!r}".format(digits)))
+        mime_version.append(ValueTerminal(digits, 'xtext'))
+    else:
+        mime_version.major = int(digits)
+        mime_version.append(ValueTerminal(digits, 'digits'))
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mime_version.append(token)
+    if not value or value[0] != '.':
+        if mime_version.major is not None:
+            mime_version.defects.append(errors.InvalidHeaderDefect(
+                "Incomplete MIME version; found only major number"))
+        if value:
+            mime_version.append(ValueTerminal(value, 'xtext'))
+        return mime_version
+    mime_version.append(ValueTerminal('.', 'version-separator'))
+    value = value[1:]
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mime_version.append(token)
+    if not value:
+        if mime_version.major is not None:
+            mime_version.defects.append(errors.InvalidHeaderDefect(
+                "Incomplete MIME version; found only major number"))
+        return mime_version
+    digits = ''
+    while value and value[0] not in CFWS_LEADER:
+        digits += value[0]
+        value = value[1:]
+    if not digits.isdigit():
+        mime_version.defects.append(errors.InvalidHeaderDefect(
+            "Expected MIME minor version number but found {!r}".format(digits)))
+        mime_version.append(ValueTerminal(digits, 'xtext'))
+    else:
+        mime_version.minor = int(digits)
+        mime_version.append(ValueTerminal(digits, 'digits'))
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mime_version.append(token)
+    if value:
+        mime_version.defects.append(errors.InvalidHeaderDefect(
+            "Excess non-CFWS text after MIME version"))
+        mime_version.append(ValueTerminal(value, 'xtext'))
+    return mime_version
+
+def get_invalid_parameter(value):
+    """ Read everything up to the next ';'.
+
+    This is outside the formal grammar.  The InvalidParameter TokenList that is
+    returned acts like a Parameter, but the data attributes are None.
+
+    """
+    invalid_parameter = InvalidParameter()
+    while value and value[0] != ';':
+        if value[0] in PHRASE_ENDS:
+            invalid_parameter.append(ValueTerminal(value[0],
+                                                   'misplaced-special'))
+            value = value[1:]
+        else:
+            token, value = get_phrase(value)
+            invalid_parameter.append(token)
+    return invalid_parameter, value
+
+def get_ttext(value):
+    """ttext = <matches _ttext_matcher>
+
+    We allow any non-TOKEN_ENDS in ttext, but add defects to the token's
+    defects list if we find non-ttext characters.  We also register defects for
+    *any* non-printables even though the RFC doesn't exclude all of them,
+    because we follow the spirit of RFC 5322.
+
+    """
+    m = _non_token_end_matcher(value)
+    if not m:
+        raise errors.HeaderParseError(
+            "expected ttext but found '{}'".format(value))
+    ttext = m.group()
+    value = value[len(ttext):]
+    ttext = ValueTerminal(ttext, 'ttext')
+    _validate_xtext(ttext)
+    return ttext, value
+
+def get_token(value):
+    """token = [CFWS] 1*ttext [CFWS]
+
+    The RFC equivalent of ttext is any US-ASCII chars except space, ctls, or
+    tspecials.  We also exclude tabs even though the RFC doesn't.
+
+    The RFC implies the CFWS but is not explicit about it in the BNF.
+
+    """
+    mtoken = Token()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mtoken.append(token)
+    if value and value[0] in TOKEN_ENDS:
+        raise errors.HeaderParseError(
+            "expected token but found '{}'".format(value))
+    token, value = get_ttext(value)
+    mtoken.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        mtoken.append(token)
+    return mtoken, value
+
+def get_attrtext(value):
+    """attrtext = 1*(any non-ATTRIBUTE_ENDS character)
+
+    We allow any non-ATTRIBUTE_ENDS in attrtext, but add defects to the
+    token's defects list if we find non-attrtext characters.  We also register
+    defects for *any* non-printables even though the RFC doesn't exclude all of
+    them, because we follow the spirit of RFC 5322.
+
+    """
+    m = _non_attribute_end_matcher(value)
+    if not m:
+        raise errors.HeaderParseError(
+            "expected attrtext but found {!r}".format(value))
+    attrtext = m.group()
+    value = value[len(attrtext):]
+    attrtext = ValueTerminal(attrtext, 'attrtext')
+    _validate_xtext(attrtext)
+    return attrtext, value
+
+def get_attribute(value):
+    """ [CFWS] 1*attrtext [CFWS]
+
+    This version of the BNF makes the CFWS explicit, and as usual we use a
+    value terminal for the actual run of characters.  The RFC equivalent of
+    attrtext is the token characters, with the subtraction of '*', "'", and '%'.
+    We include tab in the excluded set just as we do for token.
+
+    """
+    attribute = Attribute()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        attribute.append(token)
+    if value and value[0] in ATTRIBUTE_ENDS:
+        raise errors.HeaderParseError(
+            "expected token but found '{}'".format(value))
+    token, value = get_attrtext(value)
+    attribute.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        attribute.append(token)
+    return attribute, value
+
+def get_extended_attrtext(value):
+    """attrtext = 1*(any non-ATTRIBUTE_ENDS character plus '%')
+
+    This is a special parsing routine so that we get a value that
+    includes % escapes as a single string (which we decode as a single
+    string later).
+
+    """
+    m = _non_extended_attribute_end_matcher(value)
+    if not m:
+        raise errors.HeaderParseError(
+            "expected extended attrtext but found {!r}".format(value))
+    attrtext = m.group()
+    value = value[len(attrtext):]
+    attrtext = ValueTerminal(attrtext, 'extended-attrtext')
+    _validate_xtext(attrtext)
+    return attrtext, value
+
+def get_extended_attribute(value):
+    """ [CFWS] 1*extended_attrtext [CFWS]
+
+    This is like the non-extended version except we allow % characters, so that
+    we can pick up an encoded value as a single string.
+
+    """
+    # XXX: should we have an ExtendedAttribute TokenList?
+    attribute = Attribute()
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        attribute.append(token)
+    if value and value[0] in EXTENDED_ATTRIBUTE_ENDS:
+        raise errors.HeaderParseError(
+            "expected token but found '{}'".format(value))
+    token, value = get_extended_attrtext(value)
+    attribute.append(token)
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        attribute.append(token)
+    return attribute, value
+
+def get_section(value):
+    """ '*' digits
+
+    The formal BNF is more complicated because leading 0s are not allowed.  We
+    check for that and add a defect.  We also assume no CFWS is allowed between
+    the '*' and the digits, though the RFC is not crystal clear on that.
+    The caller should already have dealt with leading CFWS.
+
+    """
+    section = Section()
+    if not value or value[0] != '*':
+        raise errors.HeaderParseError("Expected section but found {}".format(
+                                        value))
+    section.append(ValueTerminal('*', 'section-marker'))
+    value = value[1:]
+    if not value or not value[0].isdigit():
+        raise errors.HeaderParseError("Expected section number but "
+                                      "found {}".format(value))
+    digits = ''
+    while value and value[0].isdigit():
+        digits += value[0]
+        value = value[1:]
+    if digits[0] == '0' and digits != '0':
+        section.defects.append(errors.InvalidHeaderDefect(
+                "section number has an invalid leading 0"))
+    section.number = int(digits)
+    section.append(ValueTerminal(digits, 'digits'))
+    return section, value
+
+
+def get_value(value):
+    """ quoted-string / attribute
+
+    """
+    v = Value()
+    if not value:
+        raise errors.HeaderParseError("Expected value but found end of string")
+    leader = None
+    if value[0] in CFWS_LEADER:
+        leader, value = get_cfws(value)
+    if not value:
+        raise errors.HeaderParseError("Expected value but found "
+                                      "only {}".format(leader))
+    if value[0] == '"':
+        token, value = get_quoted_string(value)
+    else:
+        token, value = get_extended_attribute(value)
+    if leader is not None:
+        token[:0] = [leader]
+    v.append(token)
+    return v, value
+
+def get_parameter(value):
+    """ attribute [section] ["*"] [CFWS] "=" value
+
+    The CFWS is implied by the RFC but not made explicit in the BNF.  This
+    simplified form of the BNF from the RFC is made to conform with the RFC BNF
+    through some extra checks.  We do it this way because it makes both error
+    recovery and working with the resulting parse tree easier.
+    """
+    # It is possible CFWS would also be implicitly allowed between the section
+    # and the 'extended-attribute' marker (the '*') , but we've never seen that
+    # in the wild and we will therefore ignore the possibility.
+    param = Parameter()
+    token, value = get_attribute(value)
+    param.append(token)
+    if not value or value[0] == ';':
+        param.defects.append(errors.InvalidHeaderDefect("Parameter contains "
+            "name ({}) but no value".format(token)))
+        return param, value
+    if value[0] == '*':
+        try:
+            token, value = get_section(value)
+            param.sectioned = True
+            param.append(token)
+        except errors.HeaderParseError:
+            pass
+        if not value:
+            raise errors.HeaderParseError("Incomplete parameter")
+        if value[0] == '*':
+            param.append(ValueTerminal('*', 'extended-parameter-marker'))
+            value = value[1:]
+            param.extended = True
+    if value[0] != '=':
+        raise errors.HeaderParseError("Parameter not followed by '='")
+    param.append(ValueTerminal('=', 'parameter-separator'))
+    value = value[1:]
+    if value and value[0] in CFWS_LEADER:
+        token, value = get_cfws(value)
+        param.append(token)
+    remainder = None
+    appendto = param
+    if param.extended and value and value[0] == '"':
+        # Now for some serious hackery to handle the common invalid case of
+        # double quotes around an extended value.  We also accept (with defect)
+        # a value marked as encoded that isn't really.
+        qstring, remainder = get_quoted_string(value)
+        inner_value = qstring.stripped_value
+        semi_valid = False
+        if param.section_number == 0:
+            if inner_value and inner_value[0] == "'":
+                semi_valid = True
+            else:
+                token, rest = get_attrtext(inner_value)
+                if rest and rest[0] == "'":
+                    semi_valid = True
+        else:
+            try:
+                token, rest = get_extended_attrtext(inner_value)
+            except:
+                pass
+            else:
+                if not rest:
+                    semi_valid = True
+        if semi_valid:
+            param.defects.append(errors.InvalidHeaderDefect(
+                "Quoted string value for extended parameter is invalid"))
+            param.append(qstring)
+            for t in qstring:
+                if t.token_type == 'bare-quoted-string':
+                    t[:] = []
+                    appendto = t
+                    break
+            value = inner_value
+        else:
+            remainder = None
+            param.defects.append(errors.InvalidHeaderDefect(
+                "Parameter marked as extended but appears to have a "
+                "quoted string value that is non-encoded"))
+    if value and value[0] == "'":
+        token = None
+    else:
+        token, value = get_value(value)
+    if not param.extended or param.section_number > 0:
+        if not value or value[0] != "'":
+            appendto.append(token)
+            if remainder is not None:
+                assert not value, value
+                value = remainder
+            return param, value
+        param.defects.append(errors.InvalidHeaderDefect(
+            "Apparent initial-extended-value but attribute "
+            "was not marked as extended or was not initial section"))
+    if not value:
+        # Assume the charset/lang is missing and the token is the value.
+        param.defects.append(errors.InvalidHeaderDefect(
+            "Missing required charset/lang delimiters"))
+        appendto.append(token)
+        if remainder is None:
+            return param, value
+    else:
+        if token is not None:
+            for t in token:
+                if t.token_type == 'extended-attrtext':
+                    break
+            t.token_type == 'attrtext'
+            appendto.append(t)
+            param.charset = t.value
+        if value[0] != "'":
+            raise errors.HeaderParseError("Expected RFC2231 char/lang encoding "
+                                          "delimiter, but found {!r}".format(value))
+        appendto.append(ValueTerminal("'", 'RFC2231-delimiter'))
+        value = value[1:]
+        if value and value[0] != "'":
+            token, value = get_attrtext(value)
+            appendto.append(token)
+            param.lang = token.value
+            if not value or value[0] != "'":
+                raise errors.HeaderParseError("Expected RFC2231 char/lang encoding "
+                                  "delimiter, but found {}".format(value))
+        appendto.append(ValueTerminal("'", 'RFC2231-delimiter'))
+        value = value[1:]
+    if remainder is not None:
+        # Treat the rest of value as bare quoted string content.
+        v = Value()
+        while value:
+            if value[0] in WSP:
+                token, value = get_fws(value)
+            elif value[0] == '"':
+                token = ValueTerminal('"', 'DQUOTE')
+                value = value[1:]
+            else:
+                token, value = get_qcontent(value)
+            v.append(token)
+        token = v
+    else:
+        token, value = get_value(value)
+    appendto.append(token)
+    if remainder is not None:
+        assert not value, value
+        value = remainder
+    return param, value
+
+def parse_mime_parameters(value):
+    """ parameter *( ";" parameter )
+
+    That BNF is meant to indicate this routine should only be called after
+    finding and handling the leading ';'.  There is no corresponding rule in
+    the formal RFC grammar, but it is more convenient for us for the set of
+    parameters to be treated as its own TokenList.
+
+    This is 'parse' routine because it consumes the remaining value, but it
+    would never be called to parse a full header.  Instead it is called to
+    parse everything after the non-parameter value of a specific MIME header.
+
+    """
+    mime_parameters = MimeParameters()
+    while value:
+        try:
+            token, value = get_parameter(value)
+            mime_parameters.append(token)
+        except errors.HeaderParseError:
+            leader = None
+            if value[0] in CFWS_LEADER:
+                leader, value = get_cfws(value)
+            if not value:
+                mime_parameters.append(leader)
+                return mime_parameters
+            if value[0] == ';':
+                if leader is not None:
+                    mime_parameters.append(leader)
+                mime_parameters.defects.append(errors.InvalidHeaderDefect(
+                    "parameter entry with no content"))
+            else:
+                token, value = get_invalid_parameter(value)
+                if leader:
+                    token[:0] = [leader]
+                mime_parameters.append(token)
+                mime_parameters.defects.append(errors.InvalidHeaderDefect(
+                    "invalid parameter {!r}".format(token)))
+        if value and value[0] != ';':
+            # Junk after the otherwise valid parameter.  Mark it as
+            # invalid, but it will have a value.
+            param = mime_parameters[-1]
+            param.token_type = 'invalid-parameter'
+            token, value = get_invalid_parameter(value)
+            param.extend(token)
+            mime_parameters.defects.append(errors.InvalidHeaderDefect(
+                "parameter with invalid trailing text {!r}".format(token)))
+        if value:
+            # Must be a ';' at this point.
+            mime_parameters.append(ValueTerminal(';', 'parameter-separator'))
+            value = value[1:]
+    return mime_parameters
+
+def _find_mime_parameters(tokenlist, value):
+    """Do our best to find the parameters in an invalid MIME header
+
+    """
+    while value and value[0] != ';':
+        if value[0] in PHRASE_ENDS:
+            tokenlist.append(ValueTerminal(value[0], 'misplaced-special'))
+            value = value[1:]
+        else:
+            token, value = get_phrase(value)
+            tokenlist.append(token)
+    if not value:
+        return
+    tokenlist.append(ValueTerminal(';', 'parameter-separator'))
+    tokenlist.append(parse_mime_parameters(value[1:]))
+
+def parse_content_type_header(value):
+    """ maintype "/" subtype *( ";" parameter )
+
+    The maintype and substype are tokens.  Theoretically they could
+    be checked against the official IANA list + x-token, but we
+    don't do that.
+    """
+    ctype = ContentType()
+    if not value:
+        ctype.defects.append(errors.HeaderMissingRequiredValue(
+            "Missing content type specification"))
+        return ctype
+    try:
+        token, value = get_token(value)
+    except errors.HeaderParseError:
+        ctype.defects.append(errors.InvalidHeaderDefect(
+            "Expected content maintype but found {!r}".format(value)))
+        _find_mime_parameters(ctype, value)
+        return ctype
+    ctype.append(token)
+    # XXX: If we really want to follow the formal grammar we should make
+    # mantype and subtype specialized TokenLists here.  Probably not worth it.
+    if not value or value[0] != '/':
+        ctype.defects.append(errors.InvalidHeaderDefect(
+            "Invalid content type"))
+        if value:
+            _find_mime_parameters(ctype, value)
+        return ctype
+    ctype.maintype = token.value.strip().lower()
+    ctype.append(ValueTerminal('/', 'content-type-separator'))
+    value = value[1:]
+    try:
+        token, value = get_token(value)
+    except errors.HeaderParseError:
+        ctype.defects.append(errors.InvalidHeaderDefect(
+            "Expected content subtype but found {!r}".format(value)))
+        _find_mime_parameters(ctype, value)
+        return ctype
+    ctype.append(token)
+    ctype.subtype = token.value.strip().lower()
+    if not value:
+        return ctype
+    if value[0] != ';':
+        ctype.defects.append(errors.InvalidHeaderDefect(
+            "Only parameters are valid after content type, but "
+            "found {!r}".format(value)))
+        # The RFC requires that a syntactically invalid content-type be treated
+        # as text/plain.  Perhaps we should postel this, but we should probably
+        # only do that if we were checking the subtype value against IANA.
+        del ctype.maintype, ctype.subtype
+        _find_mime_parameters(ctype, value)
+        return ctype
+    ctype.append(ValueTerminal(';', 'parameter-separator'))
+    ctype.append(parse_mime_parameters(value[1:]))
+    return ctype
+
+def parse_content_disposition_header(value):
+    """ disposition-type *( ";" parameter )
+
+    """
+    disp_header = ContentDisposition()
+    if not value:
+        disp_header.defects.append(errors.HeaderMissingRequiredValue(
+            "Missing content disposition"))
+        return disp_header
+    try:
+        token, value = get_token(value)
+    except errors.HeaderParseError:
+        disp_header.defects.append(errors.InvalidHeaderDefect(
+            "Expected content disposition but found {!r}".format(value)))
+        _find_mime_parameters(disp_header, value)
+        return disp_header
+    disp_header.append(token)
+    disp_header.content_disposition = token.value.strip().lower()
+    if not value:
+        return disp_header
+    if value[0] != ';':
+        disp_header.defects.append(errors.InvalidHeaderDefect(
+            "Only parameters are valid after content disposition, but "
+            "found {!r}".format(value)))
+        _find_mime_parameters(disp_header, value)
+        return disp_header
+    disp_header.append(ValueTerminal(';', 'parameter-separator'))
+    disp_header.append(parse_mime_parameters(value[1:]))
+    return disp_header
+
+def parse_content_transfer_encoding_header(value):
+    """ mechanism
+
+    """
+    # We should probably validate the values, since the list is fixed.
+    cte_header = ContentTransferEncoding()
+    if not value:
+        cte_header.defects.append(errors.HeaderMissingRequiredValue(
+            "Missing content transfer encoding"))
+        return cte_header
+    try:
+        token, value = get_token(value)
+    except errors.HeaderParseError:
+        cte_header.defects.append(errors.InvalidHeaderDefect(
+            "Expected content transfer encoding but found {!r}".format(value)))
+    else:
+        cte_header.append(token)
+        cte_header.cte = token.value.strip().lower()
+    if not value:
+        return cte_header
+    while value:
+        cte_header.defects.append(errors.InvalidHeaderDefect(
+            "Extra text after content transfer encoding"))
+        if value[0] in PHRASE_ENDS:
+            cte_header.append(ValueTerminal(value[0], 'misplaced-special'))
+            value = value[1:]
+        else:
+            token, value = get_phrase(value)
+            cte_header.append(token)
+    return cte_header
+
+
+#
+# Header folding
+#
+# Header folding is complex, with lots of rules and corner cases.  The
+# following code does its best to obey the rules and handle the corner
+# cases, but you can be sure there are few bugs:)
+#
+# This folder generally canonicalizes as it goes, preferring the stringified
+# version of each token.  The tokens contain information that supports the
+# folder, including which tokens can be encoded in which ways.
+#
+# Folded text is accumulated in a simple list of strings ('lines'), each
+# one of which should be less than policy.max_line_length ('maxlen').
+#
+
+def _steal_trailing_WSP_if_exists(lines):
+    wsp = ''
+    if lines and lines[-1] and lines[-1][-1] in WSP:
+        wsp = lines[-1][-1]
+        lines[-1] = lines[-1][:-1]
+        # gh-142006: if the line is now empty, remove it entirely.
+        if not lines[-1]:
+            lines.pop()
+    return wsp
+
+
+def _refold_parse_tree(parse_tree, *, policy):
+    """Return string of contents of parse_tree folded according to RFC rules.
+
+    """
+    # max_line_length 0/None means no limit, ie: infinitely long.
+    maxlen = policy.max_line_length or sys.maxsize
+    encoding = 'utf-8' if policy.utf8 else 'us-ascii'
+    lines = ['']  # Folded lines to be output
+    last_word_is_ew = False
+    last_ew = None  # if there is an encoded word in the last line of lines,
+                    # points to the encoded word's first character
+    last_charset = None
+    wrap_as_ew_blocked = 0
+    want_encoding = False  # This is set to True if we need to encode this part
+    end_ew_not_allowed = Terminal('', 'wrap_as_ew_blocked')
+    parts = list(parse_tree)
+    while parts:
+        part = parts.pop(0)
+        if part is end_ew_not_allowed:
+            wrap_as_ew_blocked -= 1
+            continue
+        tstr = str(part)
+        if not want_encoding:
+            if part.token_type in ('ptext', 'vtext'):
+                # Encode if tstr contains special characters.
+                want_encoding = not SPECIALSNL.isdisjoint(tstr)
+            else:
+                # Encode if tstr contains newlines.
+                want_encoding = not NLSET.isdisjoint(tstr)
+        try:
+            tstr.encode(encoding)
+            charset = encoding
+        except UnicodeEncodeError:
+            if any(isinstance(x, errors.UndecodableBytesDefect)
+                   for x in part.all_defects):
+                charset = 'unknown-8bit'
+            else:
+                # If policy.utf8 is false this should really be taken from a
+                # 'charset' property on the policy.
+                charset = 'utf-8'
+            want_encoding = True
+
+        if part.token_type == 'mime-parameters':
+            # Mime parameter folding (using RFC2231) is extra special.
+            _fold_mime_parameters(part, lines, maxlen, encoding)
+            last_word_is_ew = False
+            continue
+
+        if want_encoding and not wrap_as_ew_blocked:
+            if not part.as_ew_allowed:
+                want_encoding = False
+                last_ew = None
+                if part.syntactic_break:
+                    encoded_part = part.fold(policy=policy)[:-len(policy.linesep)]
+                    if policy.linesep not in encoded_part:
+                        # It fits on a single line
+                        if len(encoded_part) > maxlen - len(lines[-1]):
+                            # But not on this one, so start a new one.
+                            newline = _steal_trailing_WSP_if_exists(lines)
+                            # XXX what if encoded_part has no leading FWS?
+                            lines.append(newline)
+                        lines[-1] += encoded_part
+                        last_word_is_ew = False
+                        continue
+                # Either this is not a major syntactic break, so we don't
+                # want it on a line by itself even if it fits, or it
+                # doesn't fit on a line by itself.  Either way, fall through
+                # to unpacking the subparts and wrapping them.
+            if not hasattr(part, 'encode'):
+                # It's not a Terminal, do each piece individually.
+                parts = list(part) + parts
+                want_encoding = False
+                continue
+            elif part.as_ew_allowed:
+                # It's a terminal, wrap it as an encoded word, possibly
+                # combining it with previously encoded words if allowed.
+                if (last_ew is not None and
+                    charset != last_charset and
+                    (last_charset == 'unknown-8bit' or
+                     last_charset == 'utf-8' and charset != 'us-ascii')):
+                    last_ew = None
+                last_ew = _fold_as_ew(
+                    tstr,
+                    lines,
+                    maxlen,
+                    last_ew,
+                    part.ew_combine_allowed,
+                    charset,
+                    last_word_is_ew,
+                )
+                last_word_is_ew = True
+                last_charset = charset
+                want_encoding = False
+                continue
+            else:
+                # It's a terminal which should be kept non-encoded
+                # (e.g. a ListSeparator).
+                last_ew = None
+                want_encoding = False
+                # fall through
+
+        if len(tstr) <= maxlen - len(lines[-1]):
+            lines[-1] += tstr
+            last_word_is_ew = last_word_is_ew and not bool(tstr.strip(_WSP))
+            continue
+
+        # This part is too long to fit.  The RFC wants us to break at
+        # "major syntactic breaks", so unless we don't consider this
+        # to be one, check if it will fit on the next line by itself.
+        if (part.syntactic_break and
+                len(tstr) + 1 <= maxlen):
+            newline = _steal_trailing_WSP_if_exists(lines)
+            if newline or part.startswith_fws():
+                lines.append(newline + tstr)
+                last_word_is_ew = (last_word_is_ew
+                                   and not bool(lines[-1].strip(_WSP)))
+                last_ew = None
+                continue
+        if not hasattr(part, 'encode'):
+            # It's not a terminal, try folding the subparts.
+            newparts = list(part)
+            if part.token_type == 'bare-quoted-string':
+                # To fold a quoted string we need to create a list of terminal
+                # tokens that will render the leading and trailing quotes
+                # and use quoted pairs in the value as appropriate.
+                newparts = (
+                    [ValueTerminal('"', 'ptext')] +
+                    [ValueTerminal(make_quoted_pairs(p), 'ptext')
+                     for p in newparts] +
+                    [ValueTerminal('"', 'ptext')])
+            if part.token_type == 'comment':
+                newparts = (
+                    [ValueTerminal('(', 'ptext')] +
+                    [ValueTerminal(make_parenthesis_pairs(p), 'ptext')
+                     if p.token_type == 'ptext' else p
+                     for p in newparts] +
+                    [ValueTerminal(')', 'ptext')])
+            if not part.as_ew_allowed:
+                wrap_as_ew_blocked += 1
+                newparts.append(end_ew_not_allowed)
+            parts = newparts + parts
+            continue
+        if part.as_ew_allowed and not wrap_as_ew_blocked:
+            # It doesn't need CTE encoding, but encode it anyway so we can
+            # wrap it.
+            parts.insert(0, part)
+            want_encoding = True
+            continue
+        # We can't figure out how to wrap, it, so give up.
+        newline = _steal_trailing_WSP_if_exists(lines)
+        if newline or part.startswith_fws():
+            lines.append(newline + tstr)
+        else:
+            # We can't fold it onto the next line either...
+            lines[-1] += tstr
+        last_word_is_ew = last_word_is_ew and not bool(tstr.strip(_WSP))
+
+    return policy.linesep.join(lines) + policy.linesep
+
+def _fold_as_ew(to_encode, lines, maxlen, last_ew, ew_combine_allowed, charset, last_word_is_ew):
+    """Fold string to_encode into lines as encoded word, combining if allowed.
+    Return the new value for last_ew, or None if ew_combine_allowed is False.
+
+    If there is already an encoded word in the last line of lines (indicated by
+    a non-None value for last_ew) and ew_combine_allowed is true, decode the
+    existing ew, combine it with to_encode, and re-encode.  Otherwise, encode
+    to_encode.  In either case, split to_encode as necessary so that the
+    encoded segments fit within maxlen.
+
+    """
+    if last_ew is not None and ew_combine_allowed:
+        to_encode = str(
+            get_unstructured(lines[-1][last_ew:] + to_encode))
+        lines[-1] = lines[-1][:last_ew]
+    elif last_word_is_ew:
+        # If we are following up an encoded word with another encoded word,
+        # any white space between the two will be ignored when decoded.
+        # Therefore, we encode all to-be-displayed whitespace in the second
+        # encoded word.
+        len_without_wsp = len(lines[-1].rstrip(_WSP))
+        leading_whitespace = lines[-1][len_without_wsp:]
+        lines[-1] = (lines[-1][:len_without_wsp]
+                     + (' ' if leading_whitespace else ''))
+        to_encode = leading_whitespace + to_encode
+    elif to_encode[0] in WSP:
+        # We're joining this to non-encoded text, so don't encode
+        # the leading blank.
+        leading_wsp = to_encode[0]
+        to_encode = to_encode[1:]
+        if (len(lines[-1]) == maxlen):
+            lines.append(_steal_trailing_WSP_if_exists(lines))
+        lines[-1] += leading_wsp
+
+    trailing_wsp = ''
+    if to_encode[-1] in WSP:
+        # Likewise for the trailing space.
+        trailing_wsp = to_encode[-1]
+        to_encode = to_encode[:-1]
+    new_last_ew = len(lines[-1]) if last_ew is None else last_ew
+
+    encode_as = 'utf-8' if charset == 'us-ascii' else charset
+
+    # The RFC2047 chrome takes up 7 characters plus the length
+    # of the charset name.
+    chrome_len = len(encode_as) + 7
+
+    if (chrome_len + 1) >= maxlen:
+        raise errors.HeaderParseError(
+            "max_line_length is too small to fit an encoded word")
+
+    while to_encode:
+        remaining_space = maxlen - len(lines[-1])
+        text_space = remaining_space - chrome_len
+        if text_space <= 0:
+            newline = _steal_trailing_WSP_if_exists(lines)
+            lines.append(newline or ' ')
+            new_last_ew = len(lines[-1])
+            continue
+
+        to_encode_word = to_encode[:text_space]
+        encoded_word = _ew.encode(to_encode_word, charset=encode_as)
+        excess = len(encoded_word) - remaining_space
+        while excess > 0:
+            # Since the chunk to encode is guaranteed to fit into less than 100 characters,
+            # shrinking it by one at a time shouldn't take long.
+            to_encode_word = to_encode_word[:-1]
+            encoded_word = _ew.encode(to_encode_word, charset=encode_as)
+            excess = len(encoded_word) - remaining_space
+        lines[-1] += encoded_word
+        to_encode = to_encode[len(to_encode_word):]
+
+        if to_encode:
+            lines.append(' ')
+            new_last_ew = len(lines[-1])
+    lines[-1] += trailing_wsp
+    return new_last_ew if ew_combine_allowed else None
+
+def _fold_mime_parameters(part, lines, maxlen, encoding):
+    """Fold TokenList 'part' into the 'lines' list as mime parameters.
+
+    Using the decoded list of parameters and values, format them according to
+    the RFC rules, including using RFC2231 encoding if the value cannot be
+    expressed in 'encoding' and/or the parameter+value is too long to fit
+    within 'maxlen'.
+
+    """
+    # Special case for RFC2231 encoding: start from decoded values and use
+    # RFC2231 encoding iff needed.
+    #
+    # Note that the 1 and 2s being added to the length calculations are
+    # accounting for the possibly-needed spaces and semicolons we'll be adding.
+    #
+    for name, value in part.params:
+        # XXX What if this ';' puts us over maxlen the first time through the
+        # loop?  We should split the header value onto a newline in that case,
+        # but to do that we need to recognize the need earlier or reparse the
+        # header, so I'm going to ignore that bug for now.  It'll only put us
+        # one character over.
+        if not lines[-1].rstrip().endswith(';'):
+            lines[-1] += ';'
+        charset = encoding
+        error_handler = 'strict'
+        try:
+            value.encode(encoding)
+            encoding_required = False
+        except UnicodeEncodeError:
+            encoding_required = True
+            if utils._has_surrogates(value):
+                charset = 'unknown-8bit'
+                error_handler = 'surrogateescape'
+            else:
+                charset = 'utf-8'
+        if encoding_required:
+            encoded_value = urllib.parse.quote(
+                value, safe='', errors=error_handler)
+            tstr = "{}*={}''{}".format(name, charset, encoded_value)
+        else:
+            tstr = '{}={}'.format(name, quote_string(value))
+        if len(lines[-1]) + len(tstr) + 1 < maxlen:
+            lines[-1] = lines[-1] + ' ' + tstr
+            continue
+        elif len(tstr) + 2 <= maxlen:
+            lines.append(' ' + tstr)
+            continue
+        # We need multiple sections.  We are allowed to mix encoded and
+        # non-encoded sections, but we aren't going to.  We'll encode them all.
+        section = 0
+        extra_chrome = charset + "''"
+        while value:
+            chrome_len = len(name) + len(str(section)) + 3 + len(extra_chrome)
+            if maxlen <= chrome_len + 3:
+                # We need room for the leading blank, the trailing semicolon,
+                # and at least one character of the value.  If we don't
+                # have that, we'd be stuck, so in that case fall back to
+                # the RFC standard width.
+                maxlen = 78
+            splitpoint = maxchars = maxlen - chrome_len - 2
+            while True:
+                partial = value[:splitpoint]
+                encoded_value = urllib.parse.quote(
+                    partial, safe='', errors=error_handler)
+                if len(encoded_value) <= maxchars:
+                    break
+                splitpoint -= 1
+            lines.append(" {}*{}*={}{}".format(
+                name, section, extra_chrome, encoded_value))
+            extra_chrome = ''
+            section += 1
+            value = value[splitpoint:]
+            if value:
+                lines[-1] += ';'
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_parseaddr.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_parseaddr.py
new file mode 100644
index 0000000000000000000000000000000000000000..6a7c5fa06d20b6edf1a5258662419765bd49d47f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_parseaddr.py
@@ -0,0 +1,563 @@
+# Copyright (C) 2002 Python Software Foundation
+# Contact: email-sig@python.org
+
+"""Email address parsing code.
+
+Lifted directly from rfc822.py.  This should eventually be rewritten.
+"""
+
+__all__ = [
+    'mktime_tz',
+    'parsedate',
+    'parsedate_tz',
+    'quote',
+    ]
+
+import time
+
+SPACE = ' '
+EMPTYSTRING = ''
+COMMASPACE = ', '
+
+# Parse a date field
+_monthnames = ['jan', 'feb', 'mar', 'apr', 'may', 'jun', 'jul',
+               'aug', 'sep', 'oct', 'nov', 'dec',
+               'january', 'february', 'march', 'april', 'may', 'june', 'july',
+               'august', 'september', 'october', 'november', 'december']
+
+_daynames = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun']
+
+# The timezone table does not include the military time zones defined
+# in RFC822, other than Z.  According to RFC1123, the description in
+# RFC822 gets the signs wrong, so we can't rely on any such time
+# zones.  RFC1123 recommends that numeric timezone indicators be used
+# instead of timezone names.
+
+_timezones = {'UT':0, 'UTC':0, 'GMT':0, 'Z':0,
+              'AST': -400, 'ADT': -300,  # Atlantic (used in Canada)
+              'EST': -500, 'EDT': -400,  # Eastern
+              'CST': -600, 'CDT': -500,  # Central
+              'MST': -700, 'MDT': -600,  # Mountain
+              'PST': -800, 'PDT': -700   # Pacific
+              }
+
+
+def parsedate_tz(data):
+    """Convert a date string to a time tuple.
+
+    Accounts for military timezones.
+    """
+    res = _parsedate_tz(data)
+    if not res:
+        return
+    if res[9] is None:
+        res[9] = 0
+    return tuple(res)
+
+def _parsedate_tz(data):
+    """Convert date to extended time tuple.
+
+    The last (additional) element is the time zone offset in seconds, except if
+    the timezone was specified as -0000.  In that case the last element is
+    None.  This indicates a UTC timestamp that explicitly declaims knowledge of
+    the source timezone, as opposed to a +0000 timestamp that indicates the
+    source timezone really was UTC.
+
+    """
+    if not data:
+        return None
+    data = data.split()
+    if not data:  # This happens for whitespace-only input.
+        return None
+    # The FWS after the comma after the day-of-week is optional, so search and
+    # adjust for this.
+    if data[0].endswith(',') or data[0].lower() in _daynames:
+        # There's a dayname here. Skip it
+        del data[0]
+    else:
+        i = data[0].rfind(',')
+        if i >= 0:
+            data[0] = data[0][i+1:]
+    if len(data) == 3: # RFC 850 date, deprecated
+        stuff = data[0].split('-')
+        if len(stuff) == 3:
+            data = stuff + data[1:]
+    if len(data) == 4:
+        s = data[3]
+        i = s.find('+')
+        if i == -1:
+            i = s.find('-')
+        if i > 0:
+            data[3:] = [s[:i], s[i:]]
+        else:
+            data.append('') # Dummy tz
+    if len(data) < 5:
+        return None
+    data = data[:5]
+    [dd, mm, yy, tm, tz] = data
+    if not (dd and mm and yy):
+        return None
+    mm = mm.lower()
+    if mm not in _monthnames:
+        dd, mm = mm, dd.lower()
+        if mm not in _monthnames:
+            return None
+    mm = _monthnames.index(mm) + 1
+    if mm > 12:
+        mm -= 12
+    if dd[-1] == ',':
+        dd = dd[:-1]
+    i = yy.find(':')
+    if i > 0:
+        yy, tm = tm, yy
+    if yy[-1] == ',':
+        yy = yy[:-1]
+        if not yy:
+            return None
+    if not yy[0].isdigit():
+        yy, tz = tz, yy
+    if tm[-1] == ',':
+        tm = tm[:-1]
+    tm = tm.split(':')
+    if len(tm) == 2:
+        [thh, tmm] = tm
+        tss = '0'
+    elif len(tm) == 3:
+        [thh, tmm, tss] = tm
+    elif len(tm) == 1 and '.' in tm[0]:
+        # Some non-compliant MUAs use '.' to separate time elements.
+        tm = tm[0].split('.')
+        if len(tm) == 2:
+            [thh, tmm] = tm
+            tss = 0
+        elif len(tm) == 3:
+            [thh, tmm, tss] = tm
+        else:
+            return None
+    else:
+        return None
+    try:
+        yy = int(yy)
+        dd = int(dd)
+        thh = int(thh)
+        tmm = int(tmm)
+        tss = int(tss)
+    except ValueError:
+        return None
+    # Check for a yy specified in two-digit format, then convert it to the
+    # appropriate four-digit format, according to the POSIX standard. RFC 822
+    # calls for a two-digit yy, but RFC 2822 (which obsoletes RFC 822) already
+    # mandated a 4-digit yy, and RFC 5322 (which obsoletes RFC 2822) continues
+    # this requirement. For more information, see the documentation for
+    # the time module.
+    if yy < 100:
+        # The year is between 1969 and 1999 (inclusive).
+        if yy > 68:
+            yy += 1900
+        # The year is between 2000 and 2068 (inclusive).
+        else:
+            yy += 2000
+    tzoffset = None
+    tz = tz.upper()
+    if tz in _timezones:
+        tzoffset = _timezones[tz]
+    else:
+        try:
+            tzoffset = int(tz)
+        except ValueError:
+            pass
+        if tzoffset==0 and tz.startswith('-'):
+            tzoffset = None
+    # Convert a timezone offset into seconds ; -0500 -> -18000
+    if tzoffset:
+        if tzoffset < 0:
+            tzsign = -1
+            tzoffset = -tzoffset
+        else:
+            tzsign = 1
+        tzoffset = tzsign * ( (tzoffset//100)*3600 + (tzoffset % 100)*60)
+    # Daylight Saving Time flag is set to -1, since DST is unknown.
+    return [yy, mm, dd, thh, tmm, tss, 0, 1, -1, tzoffset]
+
+
+def parsedate(data):
+    """Convert a time string to a time tuple."""
+    t = parsedate_tz(data)
+    if isinstance(t, tuple):
+        return t[:9]
+    else:
+        return t
+
+
+def mktime_tz(data):
+    """Turn a 10-tuple as returned by parsedate_tz() into a POSIX timestamp."""
+    if data[9] is None:
+        # No zone info, so localtime is better assumption than GMT
+        return time.mktime(data[:8] + (-1,))
+    else:
+        # Delay the import, since mktime_tz is rarely used
+        import calendar
+
+        t = calendar.timegm(data)
+        return t - data[9]
+
+
+def quote(str):
+    """Prepare string to be used in a quoted string.
+
+    Turns backslash and double quote characters into quoted pairs.  These
+    are the only characters that need to be quoted inside a quoted string.
+    Does not add the surrounding double quotes.
+    """
+    return str.replace('\\', '\\\\').replace('"', '\\"')
+
+
+class AddrlistClass:
+    """Address parser class by Ben Escoto.
+
+    To understand what this class does, it helps to have a copy of RFC 2822 in
+    front of you.
+
+    Note: this class interface is deprecated and may be removed in the future.
+    Use email.utils.AddressList instead.
+    """
+
+    def __init__(self, field):
+        """Initialize a new instance.
+
+        'field' is an unparsed address header field, containing
+        one or more addresses.
+        """
+        self.specials = '()<>@,:;.\"[]'
+        self.pos = 0
+        self.LWS = ' \t'
+        self.CR = '\r\n'
+        self.FWS = self.LWS + self.CR
+        self.atomends = self.specials + self.LWS + self.CR
+        # Note that RFC 2822 section 4.1 introduced '.' as obs-phrase to handle
+        # existing practice (periods in display names), even though it was not
+        # allowed in RFC 822. RFC 5322 section 4.1 (which obsoletes RFC 2822)
+        # continues this requirement. We must recognize obsolete syntax, so
+        # allow dots in phrases.
+        self.phraseends = self.atomends.replace('.', '')
+        self.field = field
+        self.commentlist = []
+
+    def gotonext(self):
+        """Skip white space and extract comments."""
+        wslist = []
+        while self.pos < len(self.field):
+            if self.field[self.pos] in self.LWS + '\n\r':
+                if self.field[self.pos] not in '\n\r':
+                    wslist.append(self.field[self.pos])
+                self.pos += 1
+            elif self.field[self.pos] == '(':
+                self.commentlist.append(self.getcomment())
+            else:
+                break
+        return EMPTYSTRING.join(wslist)
+
+    def getaddrlist(self):
+        """Parse all addresses.
+
+        Returns a list containing all of the addresses.
+        """
+        result = []
+        while self.pos < len(self.field):
+            ad = self.getaddress()
+            if ad:
+                result += ad
+            else:
+                result.append(('', ''))
+        return result
+
+    def getaddress(self):
+        """Parse the next address."""
+        self.commentlist = []
+        self.gotonext()
+
+        oldpos = self.pos
+        oldcl = self.commentlist
+        plist = self.getphraselist()
+
+        self.gotonext()
+        returnlist = []
+
+        if self.pos >= len(self.field):
+            # Bad email address technically, no domain.
+            if plist:
+                returnlist = [(SPACE.join(self.commentlist), plist[0])]
+
+        elif self.field[self.pos] in '.@':
+            # email address is just an addrspec
+            # this isn't very efficient since we start over
+            self.pos = oldpos
+            self.commentlist = oldcl
+            addrspec = self.getaddrspec()
+            returnlist = [(SPACE.join(self.commentlist), addrspec)]
+
+        elif self.field[self.pos] == ':':
+            # address is a group
+            returnlist = []
+
+            fieldlen = len(self.field)
+            self.pos += 1
+            while self.pos < len(self.field):
+                self.gotonext()
+                if self.pos < fieldlen and self.field[self.pos] == ';':
+                    self.pos += 1
+                    break
+                returnlist = returnlist + self.getaddress()
+
+        elif self.field[self.pos] == '<':
+            # Address is a phrase then a route addr
+            routeaddr = self.getrouteaddr()
+
+            if self.commentlist:
+                returnlist = [(SPACE.join(plist) + ' (' +
+                               ' '.join(self.commentlist) + ')', routeaddr)]
+            else:
+                returnlist = [(SPACE.join(plist), routeaddr)]
+
+        else:
+            if plist:
+                returnlist = [(SPACE.join(self.commentlist), plist[0])]
+            elif self.field[self.pos] in self.specials:
+                self.pos += 1
+
+        self.gotonext()
+        if self.pos < len(self.field) and self.field[self.pos] == ',':
+            self.pos += 1
+        return returnlist
+
+    def getrouteaddr(self):
+        """Parse a route address (Return-path value).
+
+        This method just skips all the route stuff and returns the addrspec.
+        """
+        if self.field[self.pos] != '<':
+            return
+
+        expectroute = False
+        self.pos += 1
+        self.gotonext()
+        adlist = ''
+        while self.pos < len(self.field):
+            if expectroute:
+                self.getdomain()
+                expectroute = False
+            elif self.field[self.pos] == '>':
+                self.pos += 1
+                break
+            elif self.field[self.pos] == '@':
+                self.pos += 1
+                expectroute = True
+            elif self.field[self.pos] == ':':
+                self.pos += 1
+            else:
+                adlist = self.getaddrspec()
+                self.pos += 1
+                break
+            self.gotonext()
+
+        return adlist
+
+    def getaddrspec(self):
+        """Parse an RFC 2822 addr-spec."""
+        aslist = []
+
+        self.gotonext()
+        while self.pos < len(self.field):
+            preserve_ws = True
+            if self.field[self.pos] == '.':
+                if aslist and not aslist[-1].strip():
+                    aslist.pop()
+                aslist.append('.')
+                self.pos += 1
+                preserve_ws = False
+            elif self.field[self.pos] == '"':
+                aslist.append('"%s"' % quote(self.getquote()))
+            elif self.field[self.pos] in self.atomends:
+                if aslist and not aslist[-1].strip():
+                    aslist.pop()
+                break
+            else:
+                aslist.append(self.getatom())
+            ws = self.gotonext()
+            if preserve_ws and ws:
+                aslist.append(ws)
+
+        if self.pos >= len(self.field) or self.field[self.pos] != '@':
+            return EMPTYSTRING.join(aslist)
+
+        aslist.append('@')
+        self.pos += 1
+        self.gotonext()
+        domain = self.getdomain()
+        if not domain:
+            # Invalid domain, return an empty address instead of returning a
+            # local part to denote failed parsing.
+            return EMPTYSTRING
+        return EMPTYSTRING.join(aslist) + domain
+
+    def getdomain(self):
+        """Get the complete domain name from an address."""
+        sdlist = []
+        while self.pos < len(self.field):
+            if self.field[self.pos] in self.LWS:
+                self.pos += 1
+            elif self.field[self.pos] == '(':
+                self.commentlist.append(self.getcomment())
+            elif self.field[self.pos] == '[':
+                sdlist.append(self.getdomainliteral())
+            elif self.field[self.pos] == '.':
+                self.pos += 1
+                sdlist.append('.')
+            elif self.field[self.pos] == '@':
+                # bpo-34155: Don't parse domains with two `@` like
+                # `a@malicious.org@important.com`.
+                return EMPTYSTRING
+            elif self.field[self.pos] in self.atomends:
+                break
+            else:
+                sdlist.append(self.getatom())
+        return EMPTYSTRING.join(sdlist)
+
+    def getdelimited(self, beginchar, endchars, allowcomments=True):
+        """Parse a header fragment delimited by special characters.
+
+        'beginchar' is the start character for the fragment.
+        If self is not looking at an instance of 'beginchar' then
+        getdelimited returns the empty string.
+
+        'endchars' is a sequence of allowable end-delimiting characters.
+        Parsing stops when one of these is encountered.
+
+        If 'allowcomments' is non-zero, embedded RFC 2822 comments are allowed
+        within the parsed fragment.
+        """
+        if self.field[self.pos] != beginchar:
+            return ''
+
+        slist = ['']
+        quote = False
+        self.pos += 1
+        while self.pos < len(self.field):
+            if quote:
+                slist.append(self.field[self.pos])
+                quote = False
+            elif self.field[self.pos] in endchars:
+                self.pos += 1
+                break
+            elif allowcomments and self.field[self.pos] == '(':
+                slist.append(self.getcomment())
+                continue        # have already advanced pos from getcomment
+            elif self.field[self.pos] == '\\':
+                quote = True
+            else:
+                slist.append(self.field[self.pos])
+            self.pos += 1
+
+        return EMPTYSTRING.join(slist)
+
+    def getquote(self):
+        """Get a quote-delimited fragment from self's field."""
+        return self.getdelimited('"', '"\r', False)
+
+    def getcomment(self):
+        """Get a parenthesis-delimited fragment from self's field."""
+        return self.getdelimited('(', ')\r', True)
+
+    def getdomainliteral(self):
+        """Parse an RFC 2822 domain-literal."""
+        return '[%s]' % self.getdelimited('[', ']\r', False)
+
+    def getatom(self, atomends=None):
+        """Parse an RFC 2822 atom.
+
+        Optional atomends specifies a different set of end token delimiters
+        (the default is to use self.atomends).  This is used e.g. in
+        getphraselist() since phrase endings must not include the '.' (which
+        is legal in phrases)."""
+        atomlist = ['']
+        if atomends is None:
+            atomends = self.atomends
+
+        while self.pos < len(self.field):
+            if self.field[self.pos] in atomends:
+                break
+            else:
+                atomlist.append(self.field[self.pos])
+            self.pos += 1
+
+        return EMPTYSTRING.join(atomlist)
+
+    def getphraselist(self):
+        """Parse a sequence of RFC 2822 phrases.
+
+        A phrase is a sequence of words, which are in turn either RFC 2822
+        atoms or quoted-strings.  Phrases are canonicalized by squeezing all
+        runs of continuous whitespace into one space.
+        """
+        plist = []
+
+        while self.pos < len(self.field):
+            if self.field[self.pos] in self.FWS:
+                self.pos += 1
+            elif self.field[self.pos] == '"':
+                plist.append(self.getquote())
+            elif self.field[self.pos] == '(':
+                self.commentlist.append(self.getcomment())
+            elif self.field[self.pos] in self.phraseends:
+                break
+            else:
+                plist.append(self.getatom(self.phraseends))
+
+        return plist
+
+class AddressList(AddrlistClass):
+    """An AddressList encapsulates a list of parsed RFC 2822 addresses."""
+    def __init__(self, field):
+        AddrlistClass.__init__(self, field)
+        if field:
+            self.addresslist = self.getaddrlist()
+        else:
+            self.addresslist = []
+
+    def __len__(self):
+        return len(self.addresslist)
+
+    def __add__(self, other):
+        # Set union
+        newaddr = AddressList(None)
+        newaddr.addresslist = self.addresslist[:]
+        for x in other.addresslist:
+            if not x in self.addresslist:
+                newaddr.addresslist.append(x)
+        return newaddr
+
+    def __iadd__(self, other):
+        # Set union, in-place
+        for x in other.addresslist:
+            if not x in self.addresslist:
+                self.addresslist.append(x)
+        return self
+
+    def __sub__(self, other):
+        # Set difference
+        newaddr = AddressList(None)
+        for x in self.addresslist:
+            if not x in other.addresslist:
+                newaddr.addresslist.append(x)
+        return newaddr
+
+    def __isub__(self, other):
+        # Set difference, in-place
+        for x in other.addresslist:
+            if x in self.addresslist:
+                self.addresslist.remove(x)
+        return self
+
+    def __getitem__(self, index):
+        # Make indexing, slices, and 'in' work
+        return self.addresslist[index]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_policybase.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_policybase.py
new file mode 100644
index 0000000000000000000000000000000000000000..e23843df44881f3764d6150655dfbd4202309bf7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/_policybase.py
@@ -0,0 +1,392 @@
+"""Policy framework for the email package.
+
+Allows fine grained feature control of how the package parses and emits data.
+"""
+
+import abc
+import re
+from email import header
+from email import charset as _charset
+from email.utils import _has_surrogates
+
+__all__ = [
+    'Policy',
+    'Compat32',
+    'compat32',
+    ]
+
+# validation regex from RFC 5322, equivalent to pattern re.compile("[!-9;-~]+$")
+valid_header_name_re = re.compile("[\041-\071\073-\176]+$")
+
+def validate_header_name(name):
+    # Validate header name according to RFC 5322
+    if not valid_header_name_re.match(name):
+        raise ValueError(
+            f"Header field name contains invalid characters: {name!r}")
+
+class _PolicyBase:
+
+    """Policy Object basic framework.
+
+    This class is useless unless subclassed.  A subclass should define
+    class attributes with defaults for any values that are to be
+    managed by the Policy object.  The constructor will then allow
+    non-default values to be set for these attributes at instance
+    creation time.  The instance will be callable, taking these same
+    attributes keyword arguments, and returning a new instance
+    identical to the called instance except for those values changed
+    by the keyword arguments.  Instances may be added, yielding new
+    instances with any non-default values from the right hand
+    operand overriding those in the left hand operand.  That is,
+
+        A + B == A(<non-default values of B>)
+
+    The repr of an instance can be used to reconstruct the object
+    if and only if the repr of the values can be used to reconstruct
+    those values.
+
+    """
+
+    def __init__(self, **kw):
+        """Create new Policy, possibly overriding some defaults.
+
+        See class docstring for a list of overridable attributes.
+
+        """
+        for name, value in kw.items():
+            if hasattr(self, name):
+                super(_PolicyBase,self).__setattr__(name, value)
+            else:
+                raise TypeError(
+                    "{!r} is an invalid keyword argument for {}".format(
+                        name, self.__class__.__name__))
+
+    def __repr__(self):
+        args = [ "{}={!r}".format(name, value)
+                 for name, value in self.__dict__.items() ]
+        return "{}({})".format(self.__class__.__name__, ', '.join(args))
+
+    def clone(self, **kw):
+        """Return a new instance with specified attributes changed.
+
+        The new instance has the same attribute values as the current object,
+        except for the changes passed in as keyword arguments.
+
+        """
+        newpolicy = self.__class__.__new__(self.__class__)
+        for attr, value in self.__dict__.items():
+            object.__setattr__(newpolicy, attr, value)
+        for attr, value in kw.items():
+            if not hasattr(self, attr):
+                raise TypeError(
+                    "{!r} is an invalid keyword argument for {}".format(
+                        attr, self.__class__.__name__))
+            object.__setattr__(newpolicy, attr, value)
+        return newpolicy
+
+    def __setattr__(self, name, value):
+        if hasattr(self, name):
+            msg = "{!r} object attribute {!r} is read-only"
+        else:
+            msg = "{!r} object has no attribute {!r}"
+        raise AttributeError(msg.format(self.__class__.__name__, name))
+
+    def __add__(self, other):
+        """Non-default values from right operand override those from left.
+
+        The object returned is a new instance of the subclass.
+
+        """
+        return self.clone(**other.__dict__)
+
+
+def _append_doc(doc, added_doc):
+    doc = doc.rsplit('\n', 1)[0]
+    added_doc = added_doc.split('\n', 1)[1]
+    return doc + '\n' + added_doc
+
+def _extend_docstrings(cls):
+    if cls.__doc__ and cls.__doc__.startswith('+'):
+        cls.__doc__ = _append_doc(cls.__bases__[0].__doc__, cls.__doc__)
+    for name, attr in cls.__dict__.items():
+        if attr.__doc__ and attr.__doc__.startswith('+'):
+            for c in (c for base in cls.__bases__ for c in base.mro()):
+                doc = getattr(getattr(c, name), '__doc__')
+                if doc:
+                    attr.__doc__ = _append_doc(doc, attr.__doc__)
+                    break
+    return cls
+
+
+class Policy(_PolicyBase, metaclass=abc.ABCMeta):
+
+    r"""Controls for how messages are interpreted and formatted.
+
+    Most of the classes and many of the methods in the email package accept
+    Policy objects as parameters.  A Policy object contains a set of values and
+    functions that control how input is interpreted and how output is rendered.
+    For example, the parameter 'raise_on_defect' controls whether or not an RFC
+    violation results in an error being raised or not, while 'max_line_length'
+    controls the maximum length of output lines when a Message is serialized.
+
+    Any valid attribute may be overridden when a Policy is created by passing
+    it as a keyword argument to the constructor.  Policy objects are immutable,
+    but a new Policy object can be created with only certain values changed by
+    calling the Policy instance with keyword arguments.  Policy objects can
+    also be added, producing a new Policy object in which the non-default
+    attributes set in the right hand operand overwrite those specified in the
+    left operand.
+
+    Settable attributes:
+
+    raise_on_defect     -- If true, then defects should be raised as errors.
+                           Default: False.
+
+    linesep             -- string containing the value to use as separation
+                           between output lines.  Default '\n'.
+
+    cte_type            -- Type of allowed content transfer encodings
+
+                           7bit  -- ASCII only
+                           8bit  -- Content-Transfer-Encoding: 8bit is allowed
+
+                           Default: 8bit.  Also controls the disposition of
+                           (RFC invalid) binary data in headers; see the
+                           documentation of the binary_fold method.
+
+    max_line_length     -- maximum length of lines, excluding 'linesep',
+                           during serialization.  None or 0 means no line
+                           wrapping is done.  Default is 78.
+
+    mangle_from_        -- a flag that, when True escapes From_ lines in the
+                           body of the message by putting a '>' in front of
+                           them. This is used when the message is being
+                           serialized by a generator. Default: False.
+
+    message_factory     -- the class to use to create new message objects.
+                           If the value is None, the default is Message.
+
+    verify_generated_headers
+                        -- if true, the generator verifies that each header
+                           they are properly folded, so that a parser won't
+                           treat it as multiple headers, start-of-body, or
+                           part of another header.
+                           This is a check against custom Header & fold()
+                           implementations.
+    """
+
+    raise_on_defect = False
+    linesep = '\n'
+    cte_type = '8bit'
+    max_line_length = 78
+    mangle_from_ = False
+    message_factory = None
+    verify_generated_headers = True
+
+    def handle_defect(self, obj, defect):
+        """Based on policy, either raise defect or call register_defect.
+
+            handle_defect(obj, defect)
+
+        defect should be a Defect subclass, but in any case must be an
+        Exception subclass.  obj is the object on which the defect should be
+        registered if it is not raised.  If the raise_on_defect is True, the
+        defect is raised as an error, otherwise the object and the defect are
+        passed to register_defect.
+
+        This method is intended to be called by parsers that discover defects.
+        The email package parsers always call it with Defect instances.
+
+        """
+        if self.raise_on_defect:
+            raise defect
+        self.register_defect(obj, defect)
+
+    def register_defect(self, obj, defect):
+        """Record 'defect' on 'obj'.
+
+        Called by handle_defect if raise_on_defect is False.  This method is
+        part of the Policy API so that Policy subclasses can implement custom
+        defect handling.  The default implementation calls the append method of
+        the defects attribute of obj.  The objects used by the email package by
+        default that get passed to this method will always have a defects
+        attribute with an append method.
+
+        """
+        obj.defects.append(defect)
+
+    def header_max_count(self, name):
+        """Return the maximum allowed number of headers named 'name'.
+
+        Called when a header is added to a Message object.  If the returned
+        value is not 0 or None, and there are already a number of headers with
+        the name 'name' equal to the value returned, a ValueError is raised.
+
+        Because the default behavior of Message's __setitem__ is to append the
+        value to the list of headers, it is easy to create duplicate headers
+        without realizing it.  This method allows certain headers to be limited
+        in the number of instances of that header that may be added to a
+        Message programmatically.  (The limit is not observed by the parser,
+        which will faithfully produce as many headers as exist in the message
+        being parsed.)
+
+        The default implementation returns None for all header names.
+        """
+        return None
+
+    @abc.abstractmethod
+    def header_source_parse(self, sourcelines):
+        """Given a list of linesep terminated strings constituting the lines of
+        a single header, return the (name, value) tuple that should be stored
+        in the model.  The input lines should retain their terminating linesep
+        characters.  The lines passed in by the email package may contain
+        surrogateescaped binary data.
+        """
+        raise NotImplementedError
+
+    @abc.abstractmethod
+    def header_store_parse(self, name, value):
+        """Given the header name and the value provided by the application
+        program, return the (name, value) that should be stored in the model.
+        """
+        raise NotImplementedError
+
+    @abc.abstractmethod
+    def header_fetch_parse(self, name, value):
+        """Given the header name and the value from the model, return the value
+        to be returned to the application program that is requesting that
+        header.  The value passed in by the email package may contain
+        surrogateescaped binary data if the lines were parsed by a BytesParser.
+        The returned value should not contain any surrogateescaped data.
+
+        """
+        raise NotImplementedError
+
+    @abc.abstractmethod
+    def fold(self, name, value):
+        """Given the header name and the value from the model, return a string
+        containing linesep characters that implement the folding of the header
+        according to the policy controls.  The value passed in by the email
+        package may contain surrogateescaped binary data if the lines were
+        parsed by a BytesParser.  The returned value should not contain any
+        surrogateescaped data.
+
+        """
+        raise NotImplementedError
+
+    @abc.abstractmethod
+    def fold_binary(self, name, value):
+        """Given the header name and the value from the model, return binary
+        data containing linesep characters that implement the folding of the
+        header according to the policy controls.  The value passed in by the
+        email package may contain surrogateescaped binary data.
+
+        """
+        raise NotImplementedError
+
+
+@_extend_docstrings
+class Compat32(Policy):
+
+    """+
+    This particular policy is the backward compatibility Policy.  It
+    replicates the behavior of the email package version 5.1.
+    """
+
+    mangle_from_ = True
+
+    def _sanitize_header(self, name, value):
+        # If the header value contains surrogates, return a Header using
+        # the unknown-8bit charset to encode the bytes as encoded words.
+        if not isinstance(value, str):
+            # Assume it is already a header object
+            return value
+        if _has_surrogates(value):
+            return header.Header(value, charset=_charset.UNKNOWN8BIT,
+                                 header_name=name)
+        else:
+            return value
+
+    def header_source_parse(self, sourcelines):
+        """+
+        The name is parsed as everything up to the ':' and returned unmodified.
+        The value is determined by stripping leading whitespace off the
+        remainder of the first line joined with all subsequent lines, and
+        stripping any trailing carriage return or linefeed characters.
+
+        """
+        name, value = sourcelines[0].split(':', 1)
+        value = ''.join((value, *sourcelines[1:])).lstrip(' \t\r\n')
+        return (name, value.rstrip('\r\n'))
+
+    def header_store_parse(self, name, value):
+        """+
+        The name and value are returned unmodified.
+        """
+        validate_header_name(name)
+        return (name, value)
+
+    def header_fetch_parse(self, name, value):
+        """+
+        If the value contains binary data, it is converted into a Header object
+        using the unknown-8bit charset.  Otherwise it is returned unmodified.
+        """
+        return self._sanitize_header(name, value)
+
+    def fold(self, name, value):
+        """+
+        Headers are folded using the Header folding algorithm, which preserves
+        existing line breaks in the value, and wraps each resulting line to the
+        max_line_length.  Non-ASCII binary data are CTE encoded using the
+        unknown-8bit charset.
+
+        """
+        return self._fold(name, value, sanitize=True)
+
+    def fold_binary(self, name, value):
+        """+
+        Headers are folded using the Header folding algorithm, which preserves
+        existing line breaks in the value, and wraps each resulting line to the
+        max_line_length.  If cte_type is 7bit, non-ascii binary data is CTE
+        encoded using the unknown-8bit charset.  Otherwise the original source
+        header is used, with its existing line breaks and/or binary data.
+
+        """
+        folded = self._fold(name, value, sanitize=self.cte_type=='7bit')
+        return folded.encode('ascii', 'surrogateescape')
+
+    def _fold(self, name, value, sanitize):
+        parts = []
+        parts.append('%s: ' % name)
+        if isinstance(value, str):
+            if _has_surrogates(value):
+                if sanitize:
+                    h = header.Header(value,
+                                      charset=_charset.UNKNOWN8BIT,
+                                      header_name=name)
+                else:
+                    # If we have raw 8bit data in a byte string, we have no idea
+                    # what the encoding is.  There is no safe way to split this
+                    # string.  If it's ascii-subset, then we could do a normal
+                    # ascii split, but if it's multibyte then we could break the
+                    # string.  There's no way to know so the least harm seems to
+                    # be to not split the string and risk it being too long.
+                    parts.append(value)
+                    h = None
+            else:
+                h = header.Header(value, header_name=name)
+        else:
+            # Assume it is a Header-like object.
+            h = value
+        if h is not None:
+            # The Header class interprets a value of None for maxlinelen as the
+            # default value of 78, as recommended by RFC 5322 section 2.1.1.
+            maxlinelen = 0
+            if self.max_line_length is not None:
+                maxlinelen = self.max_line_length
+            parts.append(h.encode(linesep=self.linesep, maxlinelen=maxlinelen))
+        parts.append(self.linesep)
+        return ''.join(parts)
+
+
+compat32 = Compat32()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/architecture.rst b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/architecture.rst
new file mode 100644
index 0000000000000000000000000000000000000000..fcd10bde1325bbf44251c8323941eed2f73865b9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/architecture.rst
@@ -0,0 +1,216 @@
+:mod:`email` Package Architecture
+=================================
+
+Overview
+--------
+
+The email package consists of three major components:
+
+    Model
+        An object structure that represents an email message, and provides an
+        API for creating, querying, and modifying a message.
+
+    Parser
+        Takes a sequence of characters or bytes and produces a model of the
+        email message represented by those characters or bytes.
+
+    Generator
+        Takes a model and turns it into a sequence of characters or bytes.  The
+        sequence can either be intended for human consumption (a printable
+        unicode string) or bytes suitable for transmission over the wire.  In
+        the latter case all data is properly encoded using the content transfer
+        encodings specified by the relevant RFCs.
+
+Conceptually the package is organized around the model.  The model provides both
+"external" APIs intended for use by application programs using the library,
+and "internal" APIs intended for use by the Parser and Generator components.
+This division is intentionally a bit fuzzy; the API described by this
+documentation is all a public, stable API.  This allows for an application
+with special needs to implement its own parser and/or generator.
+
+In addition to the three major functional components, there is a third key
+component to the architecture:
+
+    Policy
+        An object that specifies various behavioral settings and carries
+        implementations of various behavior-controlling methods.
+
+The Policy framework provides a simple and convenient way to control the
+behavior of the library, making it possible for the library to be used in a
+very flexible fashion while leveraging the common code required to parse,
+represent, and generate message-like objects.  For example, in addition to the
+default :rfc:`5322` email message policy, we also have a policy that manages
+HTTP headers in a fashion compliant with :rfc:`2616`.  Individual policy
+controls, such as the maximum line length produced by the generator, can also
+be controlled individually to meet specialized application requirements.
+
+
+The Model
+---------
+
+The message model is implemented by the :class:`~email.message.Message` class.
+The model divides a message into the two fundamental parts discussed by the
+RFC: the header section and the body.  The `Message` object acts as a
+pseudo-dictionary of named headers.  Its dictionary interface provides
+convenient access to individual headers by name.  However, all headers are kept
+internally in an ordered list, so that the information about the order of the
+headers in the original message is preserved.
+
+The `Message` object also has a `payload` that holds the body.  A `payload` can
+be one of two things: data, or a list of `Message` objects.  The latter is used
+to represent a multipart MIME message.  Lists can be nested arbitrarily deeply
+in order to represent the message, with all terminal leaves having non-list
+data payloads.
+
+
+Message Lifecycle
+-----------------
+
+The general lifecycle of a message is:
+
+    Creation
+        A `Message` object can be created by a Parser, or it can be
+        instantiated as an empty message by an application.
+
+    Manipulation
+        The application may examine one or more headers, and/or the
+        payload, and it may modify one or more headers and/or
+        the payload.  This may be done on the top level `Message`
+        object, or on any sub-object.
+
+    Finalization
+        The Model is converted into a unicode or binary stream,
+        or the model is discarded.
+
+
+
+Header Policy Control During Lifecycle
+--------------------------------------
+
+One of the major controls exerted by the Policy is the management of headers
+during the `Message` lifecycle.  Most applications don't need to be aware of
+this.
+
+A header enters the model in one of two ways: via a Parser, or by being set to
+a specific value by an application program after the Model already exists.
+Similarly, a header exits the model in one of two ways: by being serialized by
+a Generator, or by being retrieved from a Model by an application program.  The
+Policy object provides hooks for all four of these pathways.
+
+The model storage for headers is a list of (name, value) tuples.
+
+The Parser identifies headers during parsing, and passes them to the
+:meth:`~email.policy.Policy.header_source_parse` method of the Policy.  The
+result of that method is the (name, value) tuple to be stored in the model.
+
+When an application program supplies a header value (for example, through the
+`Message` object `__setitem__` interface), the name and the value are passed to
+the :meth:`~email.policy.Policy.header_store_parse` method of the Policy, which
+returns the (name, value) tuple to be stored in the model.
+
+When an application program retrieves a header (through any of the dict or list
+interfaces of `Message`), the name and value are passed to the
+:meth:`~email.policy.Policy.header_fetch_parse` method of the Policy to
+obtain the value returned to the application.
+
+When a Generator requests a header during serialization, the name and value are
+passed to the :meth:`~email.policy.Policy.fold` method of the Policy, which
+returns a string containing line breaks in the appropriate places.  The
+:meth:`~email.policy.Policy.cte_type` Policy control determines whether or
+not Content Transfer Encoding is performed on the data in the header.  There is
+also a :meth:`~email.policy.Policy.binary_fold` method for use by generators
+that produce binary output, which returns the folded header as binary data,
+possibly folded at different places than the corresponding string would be.
+
+
+Handling Binary Data
+--------------------
+
+In an ideal world all message data would conform to the RFCs, meaning that the
+parser could decode the message into the idealized unicode message that the
+sender originally wrote.  In the real world, the email package must also be
+able to deal with badly formatted messages, including messages containing
+non-ASCII characters that either have no indicated character set or are not
+valid characters in the indicated character set.
+
+Since email messages are *primarily* text data, and operations on message data
+are primarily text operations (except for binary payloads of course), the model
+stores all text data as unicode strings.  Un-decodable binary inside text
+data is handled by using the `surrogateescape` error handler of the ASCII
+codec.  As with the binary filenames the error handler was introduced to
+handle, this allows the email package to "carry" the binary data received
+during parsing along until the output stage, at which time it is regenerated
+in its original form.
+
+This carried binary data is almost entirely an implementation detail.  The one
+place where it is visible in the API is in the "internal" API.  A Parser must
+do the `surrogateescape` encoding of binary input data, and pass that data to
+the appropriate Policy method.  The "internal" interface used by the Generator
+to access header values preserves the `surrogateescaped` bytes.  All other
+interfaces convert the binary data either back into bytes or into a safe form
+(losing information in some cases).
+
+
+Backward Compatibility
+----------------------
+
+The :class:`~email.policy.Policy.Compat32` Policy provides backward
+compatibility with version 5.1 of the email package.  It does this via the
+following implementation of the four+1 Policy methods described above:
+
+header_source_parse
+    Splits the first line on the colon to obtain the name, discards any spaces
+    after the colon, and joins the remainder of the line with all of the
+    remaining lines, preserving the linesep characters to obtain the value.
+    Trailing carriage return and/or linefeed characters are stripped from the
+    resulting value string.
+
+header_store_parse
+    Returns the name and value exactly as received from the application.
+
+header_fetch_parse
+    If the value contains any `surrogateescaped` binary data, return the value
+    as a :class:`~email.header.Header` object, using the character set
+    `unknown-8bit`.  Otherwise just returns the value.
+
+fold
+    Uses :class:`~email.header.Header`'s folding to fold headers in the
+    same way the email5.1 generator did.
+
+binary_fold
+    Same as fold, but encodes to 'ascii'.
+
+
+New Algorithm
+-------------
+
+header_source_parse
+    Same as legacy behavior.
+
+header_store_parse
+    Same as legacy behavior.
+
+header_fetch_parse
+    If the value is already a header object, returns it.  Otherwise, parses the
+    value using the new parser, and returns the resulting object as the value.
+    `surrogateescaped` bytes get turned into unicode unknown character code
+    points.
+
+fold
+    Uses the new header folding algorithm, respecting the policy settings.
+    surrogateescaped bytes are encoded using the ``unknown-8bit`` charset for
+    ``cte_type=7bit`` or ``8bit``.  Returns a string.
+
+    At some point there will also be a ``cte_type=unicode``, and for that
+    policy fold will serialize the idealized unicode message with RFC-like
+    folding, converting any surrogateescaped bytes into the unicode
+    unknown character glyph.
+
+binary_fold
+    Uses the new header folding algorithm, respecting the policy settings.
+    surrogateescaped bytes are encoded using the `unknown-8bit` charset for
+    ``cte_type=7bit``, and get turned back into bytes for ``cte_type=8bit``.
+    Returns bytes.
+
+    At some point there will also be a ``cte_type=unicode``, and for that
+    policy binary_fold will serialize the message according to :rfc:``5335``.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/base64mime.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/base64mime.py
new file mode 100644
index 0000000000000000000000000000000000000000..a5a3f737a97b519a63c61790f1846acb5c75569b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/base64mime.py
@@ -0,0 +1,115 @@
+# Copyright (C) 2002 Python Software Foundation
+# Author: Ben Gertzfield
+# Contact: email-sig@python.org
+
+"""Base64 content transfer encoding per RFCs 2045-2047.
+
+This module handles the content transfer encoding method defined in RFC 2045
+to encode arbitrary 8-bit data using the three 8-bit bytes in four 7-bit
+characters encoding known as Base64.
+
+It is used in the MIME standards for email to attach images, audio, and text
+using some 8-bit character sets to messages.
+
+This module provides an interface to encode and decode both headers and bodies
+with Base64 encoding.
+
+RFC 2045 defines a method for including character set information in an
+'encoded-word' in a header.  This method is commonly used for 8-bit real names
+in To:, From:, Cc:, etc. fields, as well as Subject: lines.
+
+This module does not do the line wrapping or end-of-line character conversion
+necessary for proper internationalized headers; it only does dumb encoding and
+decoding.  To deal with the various line wrapping issues, use the email.header
+module.
+"""
+
+__all__ = [
+    'body_decode',
+    'body_encode',
+    'decode',
+    'decodestring',
+    'header_encode',
+    'header_length',
+    ]
+
+
+from base64 import b64encode
+from binascii import b2a_base64, a2b_base64
+
+CRLF = '\r\n'
+NL = '\n'
+EMPTYSTRING = ''
+
+# See also Charset.py
+MISC_LEN = 7
+
+
+# Helpers
+def header_length(bytearray):
+    """Return the length of s when it is encoded with base64."""
+    groups_of_3, leftover = divmod(len(bytearray), 3)
+    # 4 bytes out for each 3 bytes (or nonzero fraction thereof) in.
+    n = groups_of_3 * 4
+    if leftover:
+        n += 4
+    return n
+
+
+def header_encode(header_bytes, charset='iso-8859-1'):
+    """Encode a single header line with Base64 encoding in a given charset.
+
+    charset names the character set to use to encode the header.  It defaults
+    to iso-8859-1.  Base64 encoding is defined in RFC 2045.
+    """
+    if not header_bytes:
+        return ""
+    if isinstance(header_bytes, str):
+        header_bytes = header_bytes.encode(charset)
+    encoded = b64encode(header_bytes).decode("ascii")
+    return '=?%s?b?%s?=' % (charset, encoded)
+
+
+def body_encode(s, maxlinelen=76, eol=NL):
+    r"""Encode a string with base64.
+
+    Each line will be wrapped at, at most, maxlinelen characters (defaults to
+    76 characters).
+
+    Each line of encoded text will end with eol, which defaults to "\n".  Set
+    this to "\r\n" if you will be using the result of this function directly
+    in an email.
+    """
+    if not s:
+        return ""
+
+    encvec = []
+    max_unencoded = maxlinelen * 3 // 4
+    for i in range(0, len(s), max_unencoded):
+        # BAW: should encode() inherit b2a_base64()'s dubious behavior in
+        # adding a newline to the encoded string?
+        enc = b2a_base64(s[i:i + max_unencoded]).decode("ascii")
+        if enc.endswith(NL) and eol != NL:
+            enc = enc[:-1] + eol
+        encvec.append(enc)
+    return EMPTYSTRING.join(encvec)
+
+
+def decode(string):
+    """Decode a raw base64 string, returning a bytes object.
+
+    This function does not parse a full MIME header value encoded with
+    base64 (like =?iso-8859-1?b?bmloISBuaWgh?=) -- please use the high
+    level email.header class for that functionality.
+    """
+    if not string:
+        return bytes()
+    elif isinstance(string, str):
+        return a2b_base64(string.encode('raw-unicode-escape'))
+    else:
+        return a2b_base64(string)
+
+
+# For convenience and backwards compatibility w/ standard base64 module
+body_decode = decode
+decodestring = decode
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/charset.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/charset.py
new file mode 100644
index 0000000000000000000000000000000000000000..5036c3f58a5633cce4189dfc3dda5aedbbd10a26
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/charset.py
@@ -0,0 +1,398 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Ben Gertzfield, Barry Warsaw
+# Contact: email-sig@python.org
+
+__all__ = [
+    'Charset',
+    'add_alias',
+    'add_charset',
+    'add_codec',
+    ]
+
+from functools import partial
+
+import email.base64mime
+import email.quoprimime
+
+from email import errors
+from email.encoders import encode_7or8bit
+
+
+# Flags for types of header encodings
+QP          = 1 # Quoted-Printable
+BASE64      = 2 # Base64
+SHORTEST    = 3 # the shorter of QP and base64, but only for headers
+
+# In "=?charset?q?hello_world?=", the =?, ?q?, and ?= add up to 7
+RFC2047_CHROME_LEN = 7
+
+DEFAULT_CHARSET = 'us-ascii'
+UNKNOWN8BIT = 'unknown-8bit'
+EMPTYSTRING = ''
+
+
+# Defaults
+CHARSETS = {
+    # input        header enc  body enc output conv
+    'iso-8859-1':  (QP,        QP,      None),
+    'iso-8859-2':  (QP,        QP,      None),
+    'iso-8859-3':  (QP,        QP,      None),
+    'iso-8859-4':  (QP,        QP,      None),
+    # iso-8859-5 is Cyrillic, and not especially used
+    # iso-8859-6 is Arabic, also not particularly used
+    # iso-8859-7 is Greek, QP will not make it readable
+    # iso-8859-8 is Hebrew, QP will not make it readable
+    'iso-8859-9':  (QP,        QP,      None),
+    'iso-8859-10': (QP,        QP,      None),
+    # iso-8859-11 is Thai, QP will not make it readable
+    'iso-8859-13': (QP,        QP,      None),
+    'iso-8859-14': (QP,        QP,      None),
+    'iso-8859-15': (QP,        QP,      None),
+    'iso-8859-16': (QP,        QP,      None),
+    'windows-1252':(QP,        QP,      None),
+    'viscii':      (QP,        QP,      None),
+    'us-ascii':    (None,      None,    None),
+    'big5':        (BASE64,    BASE64,  None),
+    'gb2312':      (BASE64,    BASE64,  None),
+    'euc-jp':      (BASE64,    None,    'iso-2022-jp'),
+    'shift_jis':   (BASE64,    None,    'iso-2022-jp'),
+    'iso-2022-jp': (BASE64,    None,    None),
+    'koi8-r':      (BASE64,    BASE64,  None),
+    'utf-8':       (SHORTEST,  BASE64, 'utf-8'),
+    }
+
+# Aliases for other commonly-used names for character sets.  Map
+# them to the real ones used in email.
+ALIASES = {
+    'latin_1': 'iso-8859-1',
+    'latin-1': 'iso-8859-1',
+    'latin_2': 'iso-8859-2',
+    'latin-2': 'iso-8859-2',
+    'latin_3': 'iso-8859-3',
+    'latin-3': 'iso-8859-3',
+    'latin_4': 'iso-8859-4',
+    'latin-4': 'iso-8859-4',
+    'latin_5': 'iso-8859-9',
+    'latin-5': 'iso-8859-9',
+    'latin_6': 'iso-8859-10',
+    'latin-6': 'iso-8859-10',
+    'latin_7': 'iso-8859-13',
+    'latin-7': 'iso-8859-13',
+    'latin_8': 'iso-8859-14',
+    'latin-8': 'iso-8859-14',
+    'latin_9': 'iso-8859-15',
+    'latin-9': 'iso-8859-15',
+    'latin_10':'iso-8859-16',
+    'latin-10':'iso-8859-16',
+    'cp949':   'ks_c_5601-1987',
+    'euc_jp':  'euc-jp',
+    'euc_kr':  'euc-kr',
+    'ascii':   'us-ascii',
+    }
+
+
+# Map charsets to their Unicode codec strings.
+CODEC_MAP = {
+    'gb2312':      'eucgb2312_cn',
+    'big5':        'big5_tw',
+    # Hack: We don't want *any* conversion for stuff marked us-ascii, as all
+    # sorts of garbage might be sent to us in the guise of 7-bit us-ascii.
+    # Let that stuff pass through without conversion to/from Unicode.
+    'us-ascii':    None,
+    }
+
+
+# Convenience functions for extending the above mappings
+def add_charset(charset, header_enc=None, body_enc=None, output_charset=None):
+    """Add character set properties to the global registry.
+
+    charset is the input character set, and must be the canonical name of a
+    character set.
+
+    Optional header_enc and body_enc is either charset.QP for
+    quoted-printable, charset.BASE64 for base64 encoding, charset.SHORTEST for
+    the shortest of qp or base64 encoding, or None for no encoding.  SHORTEST
+    is only valid for header_enc.  It describes how message headers and
+    message bodies in the input charset are to be encoded.  Default is no
+    encoding.
+
+    Optional output_charset is the character set that the output should be
+    in.  Conversions will proceed from input charset, to Unicode, to the
+    output charset when the method Charset.convert() is called.  The default
+    is to output in the same character set as the input.
+
+    Both input_charset and output_charset must have Unicode codec entries in
+    the module's charset-to-codec mapping; use add_codec(charset, codecname)
+    to add codecs the module does not know about.  See the codecs module's
+    documentation for more information.
+    """
+    if body_enc == SHORTEST:
+        raise ValueError('SHORTEST not allowed for body_enc')
+    CHARSETS[charset] = (header_enc, body_enc, output_charset)
+
+
+def add_alias(alias, canonical):
+    """Add a character set alias.
+
+    alias is the alias name, e.g. latin-1
+    canonical is the character set's canonical name, e.g. iso-8859-1
+    """
+    ALIASES[alias] = canonical
+
+
+def add_codec(charset, codecname):
+    """Add a codec that map characters in the given charset to/from Unicode.
+
+    charset is the canonical name of a character set.  codecname is the name
+    of a Python codec, as appropriate for the second argument to the unicode()
+    built-in, or to the encode() method of a Unicode string.
+    """
+    CODEC_MAP[charset] = codecname
+
+
+# Convenience function for encoding strings, taking into account
+# that they might be unknown-8bit (ie: have surrogate-escaped bytes)
+def _encode(string, codec):
+    if codec == UNKNOWN8BIT:
+        return string.encode('ascii', 'surrogateescape')
+    else:
+        return string.encode(codec)
+
+
+class Charset:
+    """Map character sets to their email properties.
+
+    This class provides information about the requirements imposed on email
+    for a specific character set.  It also provides convenience routines for
+    converting between character sets, given the availability of the
+    applicable codecs.  Given a character set, it will do its best to provide
+    information on how to use that character set in an email in an
+    RFC-compliant way.
+
+    Certain character sets must be encoded with quoted-printable or base64
+    when used in email headers or bodies.  Certain character sets must be
+    converted outright, and are not allowed in email.  Instances of this
+    module expose the following information about a character set:
+
+    input_charset: The initial character set specified.  Common aliases
+                   are converted to their 'official' email names (e.g. latin_1
+                   is converted to iso-8859-1).  Defaults to 7-bit us-ascii.
+
+    header_encoding: If the character set must be encoded before it can be
+                     used in an email header, this attribute will be set to
+                     charset.QP (for quoted-printable), charset.BASE64 (for
+                     base64 encoding), or charset.SHORTEST for the shortest of
+                     QP or BASE64 encoding.  Otherwise, it will be None.
+
+    body_encoding: Same as header_encoding, but describes the encoding for the
+                   mail message's body, which indeed may be different than the
+                   header encoding.  charset.SHORTEST is not allowed for
+                   body_encoding.
+
+    output_charset: Some character sets must be converted before they can be
+                    used in email headers or bodies.  If the input_charset is
+                    one of them, this attribute will contain the name of the
+                    charset output will be converted to.  Otherwise, it will
+                    be None.
+
+    input_codec: The name of the Python codec used to convert the
+                 input_charset to Unicode.  If no conversion codec is
+                 necessary, this attribute will be None.
+
+    output_codec: The name of the Python codec used to convert Unicode
+                  to the output_charset.  If no conversion codec is necessary,
+                  this attribute will have the same value as the input_codec.
+    """
+    def __init__(self, input_charset=DEFAULT_CHARSET):
+        # RFC 2046, $4.1.2 says charsets are not case sensitive.  We coerce to
+        # unicode because its .lower() is locale insensitive.  If the argument
+        # is already a unicode, we leave it at that, but ensure that the
+        # charset is ASCII, as the standard (RFC XXX) requires.
+        try:
+            if isinstance(input_charset, str):
+                input_charset.encode('ascii')
+            else:
+                input_charset = str(input_charset, 'ascii')
+        except UnicodeError:
+            raise errors.CharsetError(input_charset)
+        input_charset = input_charset.lower()
+        # Set the input charset after filtering through the aliases
+        self.input_charset = ALIASES.get(input_charset, input_charset)
+        # We can try to guess which encoding and conversion to use by the
+        # charset_map dictionary.  Try that first, but let the user override
+        # it.
+        henc, benc, conv = CHARSETS.get(self.input_charset,
+                                        (SHORTEST, BASE64, None))
+        if not conv:
+            conv = self.input_charset
+        # Set the attributes, allowing the arguments to override the default.
+        self.header_encoding = henc
+        self.body_encoding = benc
+        self.output_charset = ALIASES.get(conv, conv)
+        # Now set the codecs.  If one isn't defined for input_charset,
+        # guess and try a Unicode codec with the same name as input_codec.
+        self.input_codec = CODEC_MAP.get(self.input_charset,
+                                         self.input_charset)
+        self.output_codec = CODEC_MAP.get(self.output_charset,
+                                          self.output_charset)
+
+    def __repr__(self):
+        return self.input_charset.lower()
+
+    def __eq__(self, other):
+        return str(self) == str(other).lower()
+
+    def get_body_encoding(self):
+        """Return the content-transfer-encoding used for body encoding.
+
+        This is either the string 'quoted-printable' or 'base64' depending on
+        the encoding used, or it is a function in which case you should call
+        the function with a single argument, the Message object being
+        encoded.  The function should then set the Content-Transfer-Encoding
+        header itself to whatever is appropriate.
+
+        Returns "quoted-printable" if self.body_encoding is QP.
+        Returns "base64" if self.body_encoding is BASE64.
+        Returns conversion function otherwise.
+        """
+        assert self.body_encoding != SHORTEST
+        if self.body_encoding == QP:
+            return 'quoted-printable'
+        elif self.body_encoding == BASE64:
+            return 'base64'
+        else:
+            return encode_7or8bit
+
+    def get_output_charset(self):
+        """Return the output character set.
+
+        This is self.output_charset if that is not None, otherwise it is
+        self.input_charset.
+        """
+        return self.output_charset or self.input_charset
+
+    def header_encode(self, string):
+        """Header-encode a string by converting it first to bytes.
+
+        The type of encoding (base64 or quoted-printable) will be based on
+        this charset's `header_encoding`.
+
+        :param string: A unicode string for the header.  It must be possible
+            to encode this string to bytes using the character set's
+            output codec.
+        :return: The encoded string, with RFC 2047 chrome.
+        """
+        codec = self.output_codec or 'us-ascii'
+        header_bytes = _encode(string, codec)
+        # 7bit/8bit encodings return the string unchanged (modulo conversions)
+        encoder_module = self._get_encoder(header_bytes)
+        if encoder_module is None:
+            return string
+        return encoder_module.header_encode(header_bytes, codec)
+
+    def header_encode_lines(self, string, maxlengths):
+        """Header-encode a string by converting it first to bytes.
+
+        This is similar to `header_encode()` except that the string is fit
+        into maximum line lengths as given by the argument.
+
+        :param string: A unicode string for the header.  It must be possible
+            to encode this string to bytes using the character set's
+            output codec.
+        :param maxlengths: Maximum line length iterator.  Each element
+            returned from this iterator will provide the next maximum line
+            length.  This parameter is used as an argument to built-in next()
+            and should never be exhausted.  The maximum line lengths should
+            not count the RFC 2047 chrome.  These line lengths are only a
+            hint; the splitter does the best it can.
+        :return: Lines of encoded strings, each with RFC 2047 chrome.
+        """
+        # See which encoding we should use.
+        codec = self.output_codec or 'us-ascii'
+        header_bytes = _encode(string, codec)
+        encoder_module = self._get_encoder(header_bytes)
+        encoder = partial(encoder_module.header_encode, charset=codec)
+        # Calculate the number of characters that the RFC 2047 chrome will
+        # contribute to each line.
+        charset = self.get_output_charset()
+        extra = len(charset) + RFC2047_CHROME_LEN
+        # Now comes the hard part.  We must encode bytes but we can't split on
+        # bytes because some character sets are variable length and each
+        # encoded word must stand on its own.  So the problem is you have to
+        # encode to bytes to figure out this word's length, but you must split
+        # on characters.  This causes two problems: first, we don't know how
+        # many octets a specific substring of unicode characters will get
+        # encoded to, and second, we don't know how many ASCII characters
+        # those octets will get encoded to.  Unless we try it.  Which seems
+        # inefficient.  In the interest of being correct rather than fast (and
+        # in the hope that there will be few encoded headers in any such
+        # message), brute force it. :(
+        lines = []
+        current_line = []
+        maxlen = next(maxlengths) - extra
+        for character in string:
+            current_line.append(character)
+            this_line = EMPTYSTRING.join(current_line)
+            length = encoder_module.header_length(_encode(this_line, charset))
+            if length > maxlen:
+                # This last character doesn't fit so pop it off.
+                current_line.pop()
+                # Does nothing fit on the first line?
+                if not lines and not current_line:
+                    lines.append(None)
+                else:
+                    joined_line = EMPTYSTRING.join(current_line)
+                    header_bytes = _encode(joined_line, codec)
+                    lines.append(encoder(header_bytes))
+                current_line = [character]
+                maxlen = next(maxlengths) - extra
+        joined_line = EMPTYSTRING.join(current_line)
+        header_bytes = _encode(joined_line, codec)
+        lines.append(encoder(header_bytes))
+        return lines
+
+    def _get_encoder(self, header_bytes):
+        if self.header_encoding == BASE64:
+            return email.base64mime
+        elif self.header_encoding == QP:
+            return email.quoprimime
+        elif self.header_encoding == SHORTEST:
+            len64 = email.base64mime.header_length(header_bytes)
+            lenqp = email.quoprimime.header_length(header_bytes)
+            if len64 < lenqp:
+                return email.base64mime
+            else:
+                return email.quoprimime
+        else:
+            return None
+
+    def body_encode(self, string):
+        """Body-encode a string by converting it first to bytes.
+
+        The type of encoding (base64 or quoted-printable) will be based on
+        self.body_encoding.  If body_encoding is None, we assume the
+        output charset is a 7bit encoding, so re-encoding the decoded
+        string using the ascii codec produces the correct string version
+        of the content.
+        """
+        if not string:
+            return string
+        if self.body_encoding is BASE64:
+            if isinstance(string, str):
+                string = string.encode(self.output_charset)
+            return email.base64mime.body_encode(string)
+        elif self.body_encoding is QP:
+            # quopromime.body_encode takes a string, but operates on it as if
+            # it were a list of byte codes.  For a (minimal) history on why
+            # this is so, see changeset 0cf700464177.  To correctly encode a
+            # character set, then, we must turn it into pseudo bytes via the
+            # latin1 charset, which will encode any byte as a single code point
+            # between 0 and 255, which is what body_encode is expecting.
+            if isinstance(string, str):
+                string = string.encode(self.output_charset)
+            string = string.decode('latin1')
+            return email.quoprimime.body_encode(string)
+        else:
+            if isinstance(string, str):
+                string = string.encode(self.output_charset).decode('ascii')
+            return string
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/contentmanager.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/contentmanager.py
new file mode 100644
index 0000000000000000000000000000000000000000..11d1536db27d79c3fd4b51498830b94845dede6d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/contentmanager.py
@@ -0,0 +1,253 @@
+import binascii
+import email.charset
+import email.message
+import email.errors
+import sys
+from email import quoprimime
+
+class ContentManager:
+
+    def __init__(self):
+        self.get_handlers = {}
+        self.set_handlers = {}
+
+    def add_get_handler(self, key, handler):
+        self.get_handlers[key] = handler
+
+    def get_content(self, msg, *args, **kw):
+        content_type = msg.get_content_type()
+        if content_type in self.get_handlers:
+            return self.get_handlers[content_type](msg, *args, **kw)
+        maintype = msg.get_content_maintype()
+        if maintype in self.get_handlers:
+            return self.get_handlers[maintype](msg, *args, **kw)
+        if '' in self.get_handlers:
+            return self.get_handlers[''](msg, *args, **kw)
+        raise KeyError(content_type)
+
+    def add_set_handler(self, typekey, handler):
+        self.set_handlers[typekey] = handler
+
+    def set_content(self, msg, obj, *args, **kw):
+        if msg.get_content_maintype() == 'multipart':
+            # XXX: is this error a good idea or not?  We can remove it later,
+            # but we can't add it later, so do it for now.
+            raise TypeError("set_content not valid on multipart")
+        handler = self._find_set_handler(msg, obj)
+        msg.clear_content()
+        handler(msg, obj, *args, **kw)
+
+    def _find_set_handler(self, msg, obj):
+        full_path_for_error = None
+        for typ in type(obj).__mro__:
+            if typ in self.set_handlers:
+                return self.set_handlers[typ]
+            qname = typ.__qualname__
+            modname = getattr(typ, '__module__', '')
+            full_path = '.'.join((modname, qname)) if modname else qname
+            if full_path_for_error is None:
+                full_path_for_error = full_path
+            if full_path in self.set_handlers:
+                return self.set_handlers[full_path]
+            if qname in self.set_handlers:
+                return self.set_handlers[qname]
+            name = typ.__name__
+            if name in self.set_handlers:
+                return self.set_handlers[name]
+        if None in self.set_handlers:
+            return self.set_handlers[None]
+        raise KeyError(full_path_for_error)
+
+
+raw_data_manager = ContentManager()
+
+
+def get_text_content(msg, errors='replace'):
+    content = msg.get_payload(decode=True)
+    charset = msg.get_param('charset', 'ASCII')
+    return content.decode(charset, errors=errors)
+raw_data_manager.add_get_handler('text', get_text_content)
+
+
+def get_non_text_content(msg):
+    return msg.get_payload(decode=True)
+for maintype in 'audio image video application'.split():
+    raw_data_manager.add_get_handler(maintype, get_non_text_content)
+del maintype
+
+
+def get_message_content(msg):
+    return msg.get_payload(0)
+for subtype in 'rfc822 external-body'.split():
+    raw_data_manager.add_get_handler('message/'+subtype, get_message_content)
+del subtype
+
+
+def get_and_fixup_unknown_message_content(msg):
+    # If we don't understand a message subtype, we are supposed to treat it as
+    # if it were application/octet-stream, per
+    # tools.ietf.org/html/rfc2046#section-5.2.4.  Feedparser doesn't do that,
+    # so do our best to fix things up.  Note that it is *not* appropriate to
+    # model message/partial content as Message objects, so they are handled
+    # here as well.  (How to reassemble them is out of scope for this comment :)
+    return bytes(msg.get_payload(0))
+raw_data_manager.add_get_handler('message',
+                                 get_and_fixup_unknown_message_content)
+
+
+def _prepare_set(msg, maintype, subtype, headers):
+    msg['Content-Type'] = '/'.join((maintype, subtype))
+    if headers:
+        if not hasattr(headers[0], 'name'):
+            mp = msg.policy
+            headers = [mp.header_factory(*mp.header_source_parse([header]))
+                       for header in headers]
+        try:
+            for header in headers:
+                if header.defects:
+                    raise header.defects[0]
+                msg[header.name] = header
+        except email.errors.HeaderDefect as exc:
+            raise ValueError("Invalid header: {}".format(
+                                header.fold(policy=msg.policy))) from exc
+
+
+def _finalize_set(msg, disposition, filename, cid, params):
+    if disposition is None and filename is not None:
+        disposition = 'attachment'
+    if disposition is not None:
+        msg['Content-Disposition'] = disposition
+    if filename is not None:
+        msg.set_param('filename',
+                      filename,
+                      header='Content-Disposition',
+                      replace=True)
+    if cid is not None:
+        msg['Content-ID'] = cid
+    if params is not None:
+        for key, value in params.items():
+            msg.set_param(key, value)
+
+
+# XXX: This is a cleaned-up version of base64mime.body_encode (including a bug
+# fix in the calculation of unencoded_bytes_per_line).  It would be nice to
+# drop both this and quoprimime.body_encode in favor of enhanced binascii
+# routines that accepted a max_line_length parameter.
+def _encode_base64(data, max_line_length):
+    encoded_lines = []
+    unencoded_bytes_per_line = max_line_length // 4 * 3
+    for i in range(0, len(data), unencoded_bytes_per_line):
+        thisline = data[i:i+unencoded_bytes_per_line]
+        encoded_lines.append(binascii.b2a_base64(thisline).decode('ascii'))
+    return ''.join(encoded_lines)
+
+
+def _encode_text(string, charset, cte, policy):
+    # If max_line_length is 0 or None, there is no limit.
+    maxlen = policy.max_line_length or sys.maxsize
+    lines = string.encode(charset).splitlines()
+    linesep = policy.linesep.encode('ascii')
+    def embedded_body(lines): return linesep.join(lines) + linesep
+    def normal_body(lines): return b'\n'.join(lines) + b'\n'
+    if cte is None:
+        # Use heuristics to decide on the "best" encoding.
+        if max(map(len, lines), default=0) <= maxlen:
+            try:
+                return '7bit', normal_body(lines).decode('ascii')
+            except UnicodeDecodeError:
+                pass
+            if policy.cte_type == '8bit':
+                return '8bit', normal_body(lines).decode('ascii', 'surrogateescape')
+        sniff = embedded_body(lines[:10])
+        sniff_qp = quoprimime.body_encode(sniff.decode('latin-1'), maxlen)
+        sniff_base64 = binascii.b2a_base64(sniff)
+        # This is a little unfair to qp; it includes lineseps, base64 doesn't.
+        if len(sniff_qp) > len(sniff_base64):
+            cte = 'base64'
+        else:
+            cte = 'quoted-printable'
+            if len(lines) <= 10:
+                return cte, sniff_qp
+    if cte == '7bit':
+        data = normal_body(lines).decode('ascii')
+    elif cte == '8bit':
+        data = normal_body(lines).decode('ascii', 'surrogateescape')
+    elif cte == 'quoted-printable':
+        data = quoprimime.body_encode(normal_body(lines).decode('latin-1'),
+                                      maxlen)
+    elif cte == 'base64':
+        data = _encode_base64(embedded_body(lines), maxlen)
+    else:
+        raise ValueError("Unknown content transfer encoding {}".format(cte))
+    return cte, data
+
+
+def set_text_content(msg, string, subtype="plain", charset='utf-8', cte=None,
+                     disposition=None, filename=None, cid=None,
+                     params=None, headers=None):
+    _prepare_set(msg, 'text', subtype, headers)
+    cte, payload = _encode_text(string, charset, cte, msg.policy)
+    msg.set_payload(payload)
+    msg.set_param('charset',
+                  email.charset.ALIASES.get(charset, charset),
+                  replace=True)
+    msg['Content-Transfer-Encoding'] = cte
+    _finalize_set(msg, disposition, filename, cid, params)
+raw_data_manager.add_set_handler(str, set_text_content)
+
+
+def set_message_content(msg, message, subtype="rfc822", cte=None,
+                       disposition=None, filename=None, cid=None,
+                       params=None, headers=None):
+    if subtype == 'partial':
+        raise ValueError("message/partial is not supported for Message objects")
+    if subtype == 'rfc822':
+        if cte not in (None, '7bit', '8bit', 'binary'):
+            # http://tools.ietf.org/html/rfc2046#section-5.2.1 mandate.
+            raise ValueError(
+                "message/rfc822 parts do not support cte={}".format(cte))
+        # 8bit will get coerced on serialization if policy.cte_type='7bit'.  We
+        # may end up claiming 8bit when it isn't needed, but the only negative
+        # result of that should be a gateway that needs to coerce to 7bit
+        # having to look through the whole embedded message to discover whether
+        # or not it actually has to do anything.
+        cte = '8bit' if cte is None else cte
+    elif subtype == 'external-body':
+        if cte not in (None, '7bit'):
+            # http://tools.ietf.org/html/rfc2046#section-5.2.3 mandate.
+            raise ValueError(
+                "message/external-body parts do not support cte={}".format(cte))
+        cte = '7bit'
+    elif cte is None:
+        # http://tools.ietf.org/html/rfc2046#section-5.2.4 says all future
+        # subtypes should be restricted to 7bit, so assume that.
+        cte = '7bit'
+    _prepare_set(msg, 'message', subtype, headers)
+    msg.set_payload([message])
+    msg['Content-Transfer-Encoding'] = cte
+    _finalize_set(msg, disposition, filename, cid, params)
+raw_data_manager.add_set_handler(email.message.Message, set_message_content)
+
+
+def set_bytes_content(msg, data, maintype, subtype, cte='base64',
+                     disposition=None, filename=None, cid=None,
+                     params=None, headers=None):
+    _prepare_set(msg, maintype, subtype, headers)
+    if cte == 'base64':
+        data = _encode_base64(data, max_line_length=msg.policy.max_line_length)
+    elif cte == 'quoted-printable':
+        # XXX: quoprimime.body_encode won't encode newline characters in data,
+        # so we can't use it.  This means max_line_length is ignored.  Another
+        # bug to fix later.  (Note: encoders.quopri is broken on line ends.)
+        data = binascii.b2a_qp(data, istext=False, header=False, quotetabs=True)
+        data = data.decode('ascii')
+    elif cte == '7bit':
+        data = data.decode('ascii')
+    elif cte in ('8bit', 'binary'):
+        data = data.decode('ascii', 'surrogateescape')
+    msg.set_payload(data)
+    msg['Content-Transfer-Encoding'] = cte
+    _finalize_set(msg, disposition, filename, cid, params)
+for typ in (bytes, bytearray, memoryview):
+    raw_data_manager.add_set_handler(typ, set_bytes_content)
+del typ
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/encoders.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/encoders.py
new file mode 100644
index 0000000000000000000000000000000000000000..55741a22a07b20403cb2d6e1c16fe75f0a0631f1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/encoders.py
@@ -0,0 +1,65 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Encodings and related functions."""
+
+__all__ = [
+    'encode_7or8bit',
+    'encode_base64',
+    'encode_noop',
+    'encode_quopri',
+    ]
+
+
+from base64 import encodebytes as _bencode
+from quopri import encodestring as _encodestring
+
+
+def _qencode(s):
+    enc = _encodestring(s, quotetabs=True)
+    # Must encode spaces, which quopri.encodestring() doesn't do
+    return enc.replace(b' ', b'=20')
+
+
+def encode_base64(msg):
+    """Encode the message's payload in Base64.
+
+    Also, add an appropriate Content-Transfer-Encoding header.
+    """
+    orig = msg.get_payload(decode=True)
+    encdata = str(_bencode(orig), 'ascii')
+    msg.set_payload(encdata)
+    msg['Content-Transfer-Encoding'] = 'base64'
+
+
+def encode_quopri(msg):
+    """Encode the message's payload in quoted-printable.
+
+    Also, add an appropriate Content-Transfer-Encoding header.
+    """
+    orig = msg.get_payload(decode=True)
+    encdata = _qencode(orig)
+    msg.set_payload(encdata)
+    msg['Content-Transfer-Encoding'] = 'quoted-printable'
+
+
+def encode_7or8bit(msg):
+    """Set the Content-Transfer-Encoding header to 7bit or 8bit."""
+    orig = msg.get_payload(decode=True)
+    if orig is None:
+        # There's no payload.  For backwards compatibility we use 7bit
+        msg['Content-Transfer-Encoding'] = '7bit'
+        return
+    # We play a trick to make this go fast.  If decoding from ASCII succeeds,
+    # we know the data must be 7bit, otherwise treat it as 8bit.
+    try:
+        orig.decode('ascii')
+    except UnicodeError:
+        msg['Content-Transfer-Encoding'] = '8bit'
+    else:
+        msg['Content-Transfer-Encoding'] = '7bit'
+
+
+def encode_noop(msg):
+    """Do nothing."""
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/errors.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/errors.py
new file mode 100644
index 0000000000000000000000000000000000000000..6bc744bd59c5bb4d10512c39ef448fbd51019050
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/errors.py
@@ -0,0 +1,117 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""email package exception classes."""
+
+
+class MessageError(Exception):
+    """Base class for errors in the email package."""
+
+
+class MessageParseError(MessageError):
+    """Base class for message parsing errors."""
+
+
+class HeaderParseError(MessageParseError):
+    """Error while parsing headers."""
+
+
+class BoundaryError(MessageParseError):
+    """Couldn't find terminating boundary."""
+
+
+class MultipartConversionError(MessageError, TypeError):
+    """Conversion to a multipart is prohibited."""
+
+
+class CharsetError(MessageError):
+    """An illegal charset was given."""
+
+
+class HeaderWriteError(MessageError):
+    """Error while writing headers."""
+
+
+# These are parsing defects which the parser was able to work around.
+class MessageDefect(ValueError):
+    """Base class for a message defect."""
+
+    def __init__(self, line=None):
+        if line is not None:
+            super().__init__(line)
+        self.line = line
+
+class NoBoundaryInMultipartDefect(MessageDefect):
+    """A message claimed to be a multipart but had no boundary parameter."""
+
+class StartBoundaryNotFoundDefect(MessageDefect):
+    """The claimed start boundary was never found."""
+
+class CloseBoundaryNotFoundDefect(MessageDefect):
+    """A start boundary was found, but not the corresponding close boundary."""
+
+class FirstHeaderLineIsContinuationDefect(MessageDefect):
+    """A message had a continuation line as its first header line."""
+
+class MisplacedEnvelopeHeaderDefect(MessageDefect):
+    """A 'Unix-from' header was found in the middle of a header block."""
+
+class MissingHeaderBodySeparatorDefect(MessageDefect):
+    """Found line with no leading whitespace and no colon before blank line."""
+# XXX: backward compatibility, just in case (it was never emitted).
+MalformedHeaderDefect = MissingHeaderBodySeparatorDefect
+
+class MultipartInvariantViolationDefect(MessageDefect):
+    """A message claimed to be a multipart but no subparts were found."""
+
+class InvalidMultipartContentTransferEncodingDefect(MessageDefect):
+    """An invalid content transfer encoding was set on the multipart itself."""
+
+class UndecodableBytesDefect(MessageDefect):
+    """Header contained bytes that could not be decoded"""
+
+class InvalidBase64PaddingDefect(MessageDefect):
+    """base64 encoded sequence had an incorrect length"""
+
+class InvalidBase64CharactersDefect(MessageDefect):
+    """base64 encoded sequence had characters not in base64 alphabet"""
+
+class InvalidBase64LengthDefect(MessageDefect):
+    """base64 encoded sequence had invalid length (1 mod 4)"""
+
+# These errors are specific to header parsing.
+
+class HeaderDefect(MessageDefect):
+    """Base class for a header defect."""
+
+    def __init__(self, *args, **kw):
+        super().__init__(*args, **kw)
+
+class InvalidHeaderDefect(HeaderDefect):
+    """Header is not valid, message gives details."""
+
+class HeaderMissingRequiredValue(HeaderDefect):
+    """A header that must have a value had none"""
+
+class NonPrintableDefect(HeaderDefect):
+    """ASCII characters outside the ascii-printable range found"""
+
+    def __init__(self, non_printables):
+        super().__init__(non_printables)
+        self.non_printables = non_printables
+
+    def __str__(self):
+        return ("the following ASCII non-printables found in header: "
+            "{}".format(self.non_printables))
+
+class ObsoleteHeaderDefect(HeaderDefect):
+    """Header uses syntax declared obsolete by RFC 5322"""
+
+class NonASCIILocalPartDefect(HeaderDefect):
+    """local_part contains non-ASCII characters"""
+    # This defect only occurs during unicode parsing, not when
+    # parsing messages decoded from binary.
+
+class InvalidDateDefect(HeaderDefect):
+    """Header has unparsable or invalid date"""
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/feedparser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/feedparser.py
new file mode 100644
index 0000000000000000000000000000000000000000..ae8ef32792b3e9205f338a838a0cbf5c5f0acd91
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/feedparser.py
@@ -0,0 +1,536 @@
+# Copyright (C) 2004 Python Software Foundation
+# Authors: Baxter, Wouters and Warsaw
+# Contact: email-sig@python.org
+
+"""FeedParser - An email feed parser.
+
+The feed parser implements an interface for incrementally parsing an email
+message, line by line.  This has advantages for certain applications, such as
+those reading email messages off a socket.
+
+FeedParser.feed() is the primary interface for pushing new data into the
+parser.  It returns when there's nothing more it can do with the available
+data.  When you have no more data to push into the parser, call .close().
+This completes the parsing and returns the root message object.
+
+The other advantage of this parser is that it will never raise a parsing
+exception.  Instead, when it finds something unexpected, it adds a 'defect' to
+the current message.  Defects are just instances that live on the message
+object's .defects attribute.
+"""
+
+__all__ = ['FeedParser', 'BytesFeedParser']
+
+import re
+
+from email import errors
+from email._policybase import compat32
+from collections import deque
+from io import StringIO
+
+NLCRE = re.compile(r'\r\n|\r|\n')
+NLCRE_bol = re.compile(r'(\r\n|\r|\n)')
+NLCRE_eol = re.compile(r'(\r\n|\r|\n)\z')
+NLCRE_crack = re.compile(r'(\r\n|\r|\n)')
+# RFC 5322 section 3.6.8 Optional fields.  ftext is %d33-57 / %d59-126, Any character
+# except controls, SP, and ":".
+headerRE = re.compile(r'^(From |[\041-\071\073-\176]*:|[\t ])')
+EMPTYSTRING = ''
+NL = '\n'
+boundaryendRE = re.compile(
+    r'(?P<end>--)?(?P<ws>[ \t]*)(?P<linesep>\r\n|\r|\n)?$')
+
+NeedMoreData = object()
+
+
+class BufferedSubFile(object):
+    """A file-ish object that can have new data loaded into it.
+
+    You can also push and pop line-matching predicates onto a stack.  When the
+    current predicate matches the current line, a false EOF response
+    (i.e. empty string) is returned instead.  This lets the parser adhere to a
+    simple abstraction -- it parses until EOF closes the current message.
+    """
+    def __init__(self):
+        # Text stream of the last partial line pushed into this object.
+        # See issue 22233 for why this is a text stream and not a list.
+        self._partial = StringIO(newline='')
+        # A deque of full, pushed lines
+        self._lines = deque()
+        # The stack of false-EOF checking predicates.
+        self._eofstack = []
+        # A flag indicating whether the file has been closed or not.
+        self._closed = False
+
+    def push_eof_matcher(self, pred):
+        self._eofstack.append(pred)
+
+    def pop_eof_matcher(self):
+        return self._eofstack.pop()
+
+    def close(self):
+        # Don't forget any trailing partial line.
+        self._partial.seek(0)
+        self.pushlines(self._partial.readlines())
+        self._partial.seek(0)
+        self._partial.truncate()
+        self._closed = True
+
+    def readline(self):
+        if not self._lines:
+            if self._closed:
+                return ''
+            return NeedMoreData
+        # Pop the line off the stack and see if it matches the current
+        # false-EOF predicate.
+        line = self._lines.popleft()
+        # RFC 2046, section 5.1.2 requires us to recognize outer level
+        # boundaries at any level of inner nesting.  Do this, but be sure it's
+        # in the order of most to least nested.
+        for ateof in reversed(self._eofstack):
+            if ateof(line):
+                # We're at the false EOF.  But push the last line back first.
+                self._lines.appendleft(line)
+                return ''
+        return line
+
+    def unreadline(self, line):
+        # Let the consumer push a line back into the buffer.
+        assert line is not NeedMoreData
+        self._lines.appendleft(line)
+
+    def push(self, data):
+        """Push some new data into this object."""
+        self._partial.write(data)
+        if '\n' not in data and '\r' not in data:
+            # No new complete lines, wait for more.
+            return
+
+        # Crack into lines, preserving the linesep characters.
+        self._partial.seek(0)
+        parts = self._partial.readlines()
+        self._partial.seek(0)
+        self._partial.truncate()
+
+        # If the last element of the list does not end in a newline, then treat
+        # it as a partial line.  We only check for '\n' here because a line
+        # ending with '\r' might be a line that was split in the middle of a
+        # '\r\n' sequence (see bugs 1555570 and 1721862).
+        if not parts[-1].endswith('\n'):
+            self._partial.write(parts.pop())
+        self.pushlines(parts)
+
+    def pushlines(self, lines):
+        self._lines.extend(lines)
+
+    def __iter__(self):
+        return self
+
+    def __next__(self):
+        line = self.readline()
+        if line == '':
+            raise StopIteration
+        return line
+
+
+class FeedParser:
+    """A feed-style parser of email."""
+
+    def __init__(self, _factory=None, *, policy=compat32):
+        """_factory is called with no arguments to create a new message obj
+
+        The policy keyword specifies a policy object that controls a number of
+        aspects of the parser's operation.  The default policy maintains
+        backward compatibility.
+
+        """
+        self.policy = policy
+        self._old_style_factory = False
+        if _factory is None:
+            if policy.message_factory is None:
+                from email.message import Message
+                self._factory = Message
+            else:
+                self._factory = policy.message_factory
+        else:
+            self._factory = _factory
+            try:
+                _factory(policy=self.policy)
+            except TypeError:
+                # Assume this is an old-style factory
+                self._old_style_factory = True
+        self._input = BufferedSubFile()
+        self._msgstack = []
+        self._parse = self._parsegen().__next__
+        self._cur = None
+        self._last = None
+        self._headersonly = False
+
+    # Non-public interface for supporting Parser's headersonly flag
+    def _set_headersonly(self):
+        self._headersonly = True
+
+    def feed(self, data):
+        """Push more data into the parser."""
+        self._input.push(data)
+        self._call_parse()
+
+    def _call_parse(self):
+        try:
+            self._parse()
+        except StopIteration:
+            pass
+
+    def close(self):
+        """Parse all remaining data and return the root message object."""
+        self._input.close()
+        self._call_parse()
+        root = self._pop_message()
+        assert not self._msgstack
+        # Look for final set of defects
+        if root.get_content_maintype() == 'multipart' \
+               and not root.is_multipart() and not self._headersonly:
+            defect = errors.MultipartInvariantViolationDefect()
+            self.policy.handle_defect(root, defect)
+        return root
+
+    def _new_message(self):
+        if self._old_style_factory:
+            msg = self._factory()
+        else:
+            msg = self._factory(policy=self.policy)
+        if self._cur and self._cur.get_content_type() == 'multipart/digest':
+            msg.set_default_type('message/rfc822')
+        if self._msgstack:
+            self._msgstack[-1].attach(msg)
+        self._msgstack.append(msg)
+        self._cur = msg
+        self._last = msg
+
+    def _pop_message(self):
+        retval = self._msgstack.pop()
+        if self._msgstack:
+            self._cur = self._msgstack[-1]
+        else:
+            self._cur = None
+        return retval
+
+    def _parsegen(self):
+        # Create a new message and start by parsing headers.
+        self._new_message()
+        headers = []
+        # Collect the headers, searching for a line that doesn't match the RFC
+        # 2822 header or continuation pattern (including an empty line).
+        for line in self._input:
+            if line is NeedMoreData:
+                yield NeedMoreData
+                continue
+            if not headerRE.match(line):
+                # If we saw the RFC defined header/body separator
+                # (i.e. newline), just throw it away. Otherwise the line is
+                # part of the body so push it back.
+                if not NLCRE.match(line):
+                    defect = errors.MissingHeaderBodySeparatorDefect()
+                    self.policy.handle_defect(self._cur, defect)
+                    self._input.unreadline(line)
+                break
+            headers.append(line)
+        # Done with the headers, so parse them and figure out what we're
+        # supposed to see in the body of the message.
+        self._parse_headers(headers)
+        # Headers-only parsing is a backwards compatibility hack, which was
+        # necessary in the older parser, which could raise errors.  All
+        # remaining lines in the input are thrown into the message body.
+        if self._headersonly:
+            lines = []
+            while True:
+                line = self._input.readline()
+                if line is NeedMoreData:
+                    yield NeedMoreData
+                    continue
+                if line == '':
+                    break
+                lines.append(line)
+            self._cur.set_payload(EMPTYSTRING.join(lines))
+            return
+        if self._cur.get_content_type() == 'message/delivery-status':
+            # message/delivery-status contains blocks of headers separated by
+            # a blank line.  We'll represent each header block as a separate
+            # nested message object, but the processing is a bit different
+            # than standard message/* types because there is no body for the
+            # nested messages.  A blank line separates the subparts.
+            while True:
+                self._input.push_eof_matcher(NLCRE.match)
+                for retval in self._parsegen():
+                    if retval is NeedMoreData:
+                        yield NeedMoreData
+                        continue
+                    break
+                self._pop_message()
+                # We need to pop the EOF matcher in order to tell if we're at
+                # the end of the current file, not the end of the last block
+                # of message headers.
+                self._input.pop_eof_matcher()
+                # The input stream must be sitting at the newline or at the
+                # EOF.  We want to see if we're at the end of this subpart, so
+                # first consume the blank line, then test the next line to see
+                # if we're at this subpart's EOF.
+                while True:
+                    line = self._input.readline()
+                    if line is NeedMoreData:
+                        yield NeedMoreData
+                        continue
+                    break
+                while True:
+                    line = self._input.readline()
+                    if line is NeedMoreData:
+                        yield NeedMoreData
+                        continue
+                    break
+                if line == '':
+                    break
+                # Not at EOF so this is a line we're going to need.
+                self._input.unreadline(line)
+            return
+        if self._cur.get_content_maintype() == 'message':
+            # The message claims to be a message/* type, then what follows is
+            # another RFC 5322 message.
+            for retval in self._parsegen():
+                if retval is NeedMoreData:
+                    yield NeedMoreData
+                    continue
+                break
+            self._pop_message()
+            return
+        if self._cur.get_content_maintype() == 'multipart':
+            boundary = self._cur.get_boundary()
+            if boundary is None:
+                # The message /claims/ to be a multipart but it has not
+                # defined a boundary.  That's a problem which we'll handle by
+                # reading everything until the EOF and marking the message as
+                # defective.
+                defect = errors.NoBoundaryInMultipartDefect()
+                self.policy.handle_defect(self._cur, defect)
+                lines = []
+                for line in self._input:
+                    if line is NeedMoreData:
+                        yield NeedMoreData
+                        continue
+                    lines.append(line)
+                self._cur.set_payload(EMPTYSTRING.join(lines))
+                return
+            # Make sure a valid content type was specified per RFC 2045:6.4.
+            if (str(self._cur.get('content-transfer-encoding', '8bit')).lower()
+                    not in ('7bit', '8bit', 'binary')):
+                defect = errors.InvalidMultipartContentTransferEncodingDefect()
+                self.policy.handle_defect(self._cur, defect)
+            # Create a line match predicate which matches the inter-part
+            # boundary as well as the end-of-multipart boundary.  Don't push
+            # this onto the input stream until we've scanned past the
+            # preamble.
+            separator = '--' + boundary
+            def boundarymatch(line):
+                if not line.startswith(separator):
+                    return None
+                return boundaryendRE.match(line, len(separator))
+            capturing_preamble = True
+            preamble = []
+            linesep = False
+            close_boundary_seen = False
+            while True:
+                line = self._input.readline()
+                if line is NeedMoreData:
+                    yield NeedMoreData
+                    continue
+                if line == '':
+                    break
+                mo = boundarymatch(line)
+                if mo:
+                    # If we're looking at the end boundary, we're done with
+                    # this multipart.  If there was a newline at the end of
+                    # the closing boundary, then we need to initialize the
+                    # epilogue with the empty string (see below).
+                    if mo.group('end'):
+                        close_boundary_seen = True
+                        linesep = mo.group('linesep')
+                        break
+                    # We saw an inter-part boundary.  Were we in the preamble?
+                    if capturing_preamble:
+                        if preamble:
+                            # According to RFC 2046, the last newline belongs
+                            # to the boundary.
+                            lastline = preamble[-1]
+                            eolmo = NLCRE_eol.search(lastline)
+                            if eolmo:
+                                preamble[-1] = lastline[:-len(eolmo.group(0))]
+                            self._cur.preamble = EMPTYSTRING.join(preamble)
+                        capturing_preamble = False
+                        self._input.unreadline(line)
+                        continue
+                    # We saw a boundary separating two parts.  Consume any
+                    # multiple boundary lines that may be following.  Our
+                    # interpretation of RFC 2046 BNF grammar does not produce
+                    # body parts within such double boundaries.
+                    while True:
+                        line = self._input.readline()
+                        if line is NeedMoreData:
+                            yield NeedMoreData
+                            continue
+                        mo = boundarymatch(line)
+                        if not mo:
+                            self._input.unreadline(line)
+                            break
+                    # Recurse to parse this subpart; the input stream points
+                    # at the subpart's first line.
+                    self._input.push_eof_matcher(boundarymatch)
+                    for retval in self._parsegen():
+                        if retval is NeedMoreData:
+                            yield NeedMoreData
+                            continue
+                        break
+                    # Because of RFC 2046, the newline preceding the boundary
+                    # separator actually belongs to the boundary, not the
+                    # previous subpart's payload (or epilogue if the previous
+                    # part is a multipart).
+                    if self._last.get_content_maintype() == 'multipart':
+                        epilogue = self._last.epilogue
+                        if epilogue == '':
+                            self._last.epilogue = None
+                        elif epilogue is not None:
+                            mo = NLCRE_eol.search(epilogue)
+                            if mo:
+                                end = len(mo.group(0))
+                                self._last.epilogue = epilogue[:-end]
+                    else:
+                        payload = self._last._payload
+                        if isinstance(payload, str):
+                            mo = NLCRE_eol.search(payload)
+                            if mo:
+                                payload = payload[:-len(mo.group(0))]
+                                self._last._payload = payload
+                    self._input.pop_eof_matcher()
+                    self._pop_message()
+                    # Set the multipart up for newline cleansing, which will
+                    # happen if we're in a nested multipart.
+                    self._last = self._cur
+                else:
+                    # I think we must be in the preamble
+                    assert capturing_preamble
+                    preamble.append(line)
+            # We've seen either the EOF or the end boundary.  If we're still
+            # capturing the preamble, we never saw the start boundary.  Note
+            # that as a defect and store the captured text as the payload.
+            if capturing_preamble:
+                defect = errors.StartBoundaryNotFoundDefect()
+                self.policy.handle_defect(self._cur, defect)
+                self._cur.set_payload(EMPTYSTRING.join(preamble))
+                epilogue = []
+                for line in self._input:
+                    if line is NeedMoreData:
+                        yield NeedMoreData
+                        continue
+                self._cur.epilogue = EMPTYSTRING.join(epilogue)
+                return
+            # If we're not processing the preamble, then we might have seen
+            # EOF without seeing that end boundary...that is also a defect.
+            if not close_boundary_seen:
+                defect = errors.CloseBoundaryNotFoundDefect()
+                self.policy.handle_defect(self._cur, defect)
+                return
+            # Everything from here to the EOF is epilogue.  If the end boundary
+            # ended in a newline, we'll need to make sure the epilogue isn't
+            # None
+            if linesep:
+                epilogue = ['']
+            else:
+                epilogue = []
+            for line in self._input:
+                if line is NeedMoreData:
+                    yield NeedMoreData
+                    continue
+                epilogue.append(line)
+            # Any CRLF at the front of the epilogue is not technically part of
+            # the epilogue.  Also, watch out for an empty string epilogue,
+            # which means a single newline.
+            if epilogue:
+                firstline = epilogue[0]
+                bolmo = NLCRE_bol.match(firstline)
+                if bolmo:
+                    epilogue[0] = firstline[len(bolmo.group(0)):]
+            self._cur.epilogue = EMPTYSTRING.join(epilogue)
+            return
+        # Otherwise, it's some non-multipart type, so the entire rest of the
+        # file contents becomes the payload.
+        lines = []
+        for line in self._input:
+            if line is NeedMoreData:
+                yield NeedMoreData
+                continue
+            lines.append(line)
+        self._cur.set_payload(EMPTYSTRING.join(lines))
+
+    def _parse_headers(self, lines):
+        # Passed a list of lines that make up the headers for the current msg
+        lastheader = ''
+        lastvalue = []
+        for lineno, line in enumerate(lines):
+            # Check for continuation
+            if line[0] in ' \t':
+                if not lastheader:
+                    # The first line of the headers was a continuation.  This
+                    # is illegal, so let's note the defect, store the illegal
+                    # line, and ignore it for purposes of headers.
+                    defect = errors.FirstHeaderLineIsContinuationDefect(line)
+                    self.policy.handle_defect(self._cur, defect)
+                    continue
+                lastvalue.append(line)
+                continue
+            if lastheader:
+                self._cur.set_raw(*self.policy.header_source_parse(lastvalue))
+                lastheader, lastvalue = '', []
+            # Check for envelope header, i.e. unix-from
+            if line.startswith('From '):
+                if lineno == 0:
+                    # Strip off the trailing newline
+                    mo = NLCRE_eol.search(line)
+                    if mo:
+                        line = line[:-len(mo.group(0))]
+                    self._cur.set_unixfrom(line)
+                    continue
+                elif lineno == len(lines) - 1:
+                    # Something looking like a unix-from at the end - it's
+                    # probably the first line of the body, so push back the
+                    # line and stop.
+                    self._input.unreadline(line)
+                    return
+                else:
+                    # Weirdly placed unix-from line.
+                    defect = errors.MisplacedEnvelopeHeaderDefect(line)
+                    self.policy.handle_defect(self._cur, defect)
+                    continue
+            # Split the line on the colon separating field name from value.
+            # There will always be a colon, because if there wasn't the part of
+            # the parser that calls us would have started parsing the body.
+            i = line.find(':')
+
+            # If the colon is on the start of the line the header is clearly
+            # malformed, but we might be able to salvage the rest of the
+            # message. Track the error but keep going.
+            if i == 0:
+                defect = errors.InvalidHeaderDefect("Missing header name.")
+                self.policy.handle_defect(self._cur, defect)
+                continue
+
+            assert i>0, "_parse_headers fed line with no : and no leading WS"
+            lastheader = line[:i]
+            lastvalue = [line]
+        # Done with all the lines, so handle the last header.
+        if lastheader:
+            self._cur.set_raw(*self.policy.header_source_parse(lastvalue))
+
+
+class BytesFeedParser(FeedParser):
+    """Like FeedParser, but feed accepts bytes."""
+
+    def feed(self, data):
+        super().feed(data.decode('ascii', 'surrogateescape'))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/generator.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/generator.py
new file mode 100644
index 0000000000000000000000000000000000000000..cebbc416087fee38af4606d6d0ebe07ab4682713
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/generator.py
@@ -0,0 +1,530 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Classes to generate plain text from a message object tree."""
+
+__all__ = ['Generator', 'DecodedGenerator', 'BytesGenerator']
+
+import re
+import sys
+import time
+import random
+
+from copy import deepcopy
+from io import StringIO, BytesIO
+from email.utils import _has_surrogates
+from email.errors import HeaderWriteError
+
+UNDERSCORE = '_'
+NL = '\n'  # XXX: no longer used by the code below.
+
+NLCRE = re.compile(r'\r\n|\r|\n')
+fcre = re.compile(r'^From ', re.MULTILINE)
+NEWLINE_WITHOUT_FWSP = re.compile(r'\r\n[^ \t]|\r[^ \n\t]|\n[^ \t]')
+NEWLINE_WITHOUT_FWSP_BYTES = re.compile(br'\r\n[^ \t]|\r[^ \n\t]|\n[^ \t]')
+
+
+class Generator:
+    """Generates output from a Message object tree.
+
+    This basic generator writes the message to the given file object as plain
+    text.
+    """
+    #
+    # Public interface
+    #
+
+    def __init__(self, outfp, mangle_from_=None, maxheaderlen=None, *,
+                 policy=None):
+        """Create the generator for message flattening.
+
+        outfp is the output file-like object for writing the message to.  It
+        must have a write() method.
+
+        Optional mangle_from_ is a flag that, when True (the default if policy
+        is not set), escapes From_ lines in the body of the message by putting
+        a '>' in front of them.
+
+        Optional maxheaderlen specifies the longest length for a non-continued
+        header.  When a header line is longer (in characters, with tabs
+        expanded to 8 spaces) than maxheaderlen, the header will split as
+        defined in the Header class.  Set maxheaderlen to zero to disable
+        header wrapping.  The default is 78, as recommended (but not required)
+        by RFC 5322 section 2.1.1.
+
+        The policy keyword specifies a policy object that controls a number of
+        aspects of the generator's operation.  If no policy is specified,
+        the policy associated with the Message object passed to the
+        flatten method is used.
+
+        """
+
+        if mangle_from_ is None:
+            mangle_from_ = True if policy is None else policy.mangle_from_
+        self._fp = outfp
+        self._mangle_from_ = mangle_from_
+        self.maxheaderlen = maxheaderlen
+        self.policy = policy
+
+    def write(self, s):
+        # Just delegate to the file object
+        self._fp.write(s)
+
+    def flatten(self, msg, unixfrom=False, linesep=None):
+        r"""Print the message object tree rooted at msg to the output file
+        specified when the Generator instance was created.
+
+        unixfrom is a flag that forces the printing of a Unix From_ delimiter
+        before the first object in the message tree.  If the original message
+        has no From_ delimiter, a 'standard' one is crafted.  By default, this
+        is False to inhibit the printing of any From_ delimiter.
+
+        Note that for subobjects, no From_ line is printed.
+
+        linesep specifies the characters used to indicate a new line in
+        the output.  The default value is determined by the policy specified
+        when the Generator instance was created or, if none was specified,
+        from the policy associated with the msg.
+
+        """
+        # We use the _XXX constants for operating on data that comes directly
+        # from the msg, and _encoded_XXX constants for operating on data that
+        # has already been converted (to bytes in the BytesGenerator) and
+        # inserted into a temporary buffer.
+        policy = msg.policy if self.policy is None else self.policy
+        if linesep is not None:
+            policy = policy.clone(linesep=linesep)
+        if self.maxheaderlen is not None:
+            policy = policy.clone(max_line_length=self.maxheaderlen)
+        self._NL = policy.linesep
+        self._encoded_NL = self._encode(self._NL)
+        self._EMPTY = ''
+        self._encoded_EMPTY = self._encode(self._EMPTY)
+        # Because we use clone (below) when we recursively process message
+        # subparts, and because clone uses the computed policy (not None),
+        # submessages will automatically get set to the computed policy when
+        # they are processed by this code.
+        old_gen_policy = self.policy
+        old_msg_policy = msg.policy
+        try:
+            self.policy = policy
+            msg.policy = policy
+            if unixfrom:
+                ufrom = msg.get_unixfrom()
+                if not ufrom:
+                    ufrom = 'From nobody ' + time.ctime(time.time())
+                self.write(ufrom + self._NL)
+            self._write(msg)
+        finally:
+            self.policy = old_gen_policy
+            msg.policy = old_msg_policy
+
+    def clone(self, fp):
+        """Clone this generator with the exact same options."""
+        return self.__class__(fp,
+                              self._mangle_from_,
+                              None, # Use policy setting, which we've adjusted
+                              policy=self.policy)
+
+    #
+    # Protected interface - undocumented ;/
+    #
+
+    # Note that we use 'self.write' when what we are writing is coming from
+    # the source, and self._fp.write when what we are writing is coming from a
+    # buffer (because the Bytes subclass has already had a chance to transform
+    # the data in its write method in that case).  This is an entirely
+    # pragmatic split determined by experiment; we could be more general by
+    # always using write and having the Bytes subclass write method detect when
+    # it has already transformed the input; but, since this whole thing is a
+    # hack anyway this seems good enough.
+
+    def _new_buffer(self):
+        # BytesGenerator overrides this to return BytesIO.
+        return StringIO()
+
+    def _encode(self, s):
+        # BytesGenerator overrides this to encode strings to bytes.
+        return s
+
+    def _write_lines(self, lines):
+        # We have to transform the line endings.
+        if not lines:
+            return
+        lines = NLCRE.split(lines)
+        for line in lines[:-1]:
+            self.write(line)
+            self.write(self._NL)
+        if lines[-1]:
+            self.write(lines[-1])
+        # XXX logic tells me this else should be needed, but the tests fail
+        # with it and pass without it.  (NLCRE.split ends with a blank element
+        # if and only if there was a trailing newline.)
+        #else:
+        #    self.write(self._NL)
+
+    def _write(self, msg):
+        # We can't write the headers yet because of the following scenario:
+        # say a multipart message includes the boundary string somewhere in
+        # its body.  We'd have to calculate the new boundary /before/ we write
+        # the headers so that we can write the correct Content-Type:
+        # parameter.
+        #
+        # The way we do this, so as to make the _handle_*() methods simpler,
+        # is to cache any subpart writes into a buffer.  Then we write the
+        # headers and the buffer contents.  That way, subpart handlers can
+        # Do The Right Thing, and can still modify the Content-Type: header if
+        # necessary.
+        oldfp = self._fp
+        try:
+            self._munge_cte = None
+            self._fp = sfp = self._new_buffer()
+            self._dispatch(msg)
+        finally:
+            self._fp = oldfp
+            munge_cte = self._munge_cte
+            del self._munge_cte
+        # If we munged the cte, copy the message again and re-fix the CTE.
+        if munge_cte:
+            msg = deepcopy(msg)
+            # Preserve the header order if the CTE header already exists.
+            if msg.get('content-transfer-encoding') is None:
+                msg['Content-Transfer-Encoding'] = munge_cte[0]
+            else:
+                msg.replace_header('content-transfer-encoding', munge_cte[0])
+            msg.replace_header('content-type', munge_cte[1])
+        # Write the headers.  First we see if the message object wants to
+        # handle that itself.  If not, we'll do it generically.
+        meth = getattr(msg, '_write_headers', None)
+        if meth is None:
+            self._write_headers(msg)
+        else:
+            meth(self)
+        self._fp.write(sfp.getvalue())
+
+    def _dispatch(self, msg):
+        # Get the Content-Type: for the message, then try to dispatch to
+        # self._handle_<maintype>_<subtype>().  If there's no handler for the
+        # full MIME type, then dispatch to self._handle_<maintype>().  If
+        # that's missing too, then dispatch to self._writeBody().
+        main = msg.get_content_maintype()
+        sub = msg.get_content_subtype()
+        specific = UNDERSCORE.join((main, sub)).replace('-', '_')
+        meth = getattr(self, '_handle_' + specific, None)
+        if meth is None:
+            generic = main.replace('-', '_')
+            meth = getattr(self, '_handle_' + generic, None)
+            if meth is None:
+                meth = self._writeBody
+        meth(msg)
+
+    #
+    # Default handlers
+    #
+
+    def _write_headers(self, msg):
+        for h, v in msg.raw_items():
+            folded = self.policy.fold(h, v)
+            if self.policy.verify_generated_headers:
+                linesep = self.policy.linesep
+                if not folded.endswith(linesep):
+                    raise HeaderWriteError(
+                        f'folded header does not end with {linesep!r}: {folded!r}')
+                if NEWLINE_WITHOUT_FWSP.search(folded.removesuffix(linesep)):
+                    raise HeaderWriteError(
+                        f'folded header contains newline: {folded!r}')
+            self.write(folded)
+        # A blank line always separates headers from body
+        self.write(self._NL)
+
+    #
+    # Handlers for writing types and subtypes
+    #
+
+    def _handle_text(self, msg):
+        payload = msg.get_payload()
+        if payload is None:
+            return
+        if not isinstance(payload, str):
+            raise TypeError('string payload expected: %s' % type(payload))
+        if _has_surrogates(msg._payload):
+            charset = msg.get_param('charset')
+            if charset is not None:
+                # XXX: This copy stuff is an ugly hack to avoid modifying the
+                # existing message.
+                msg = deepcopy(msg)
+                del msg['content-transfer-encoding']
+                msg.set_payload(msg._payload, charset)
+                payload = msg.get_payload()
+                self._munge_cte = (msg['content-transfer-encoding'],
+                                   msg['content-type'])
+        if self._mangle_from_:
+            payload = fcre.sub('>From ', payload)
+        self._write_lines(payload)
+
+    # Default body handler
+    _writeBody = _handle_text
+
+    def _handle_multipart(self, msg):
+        # The trick here is to write out each part separately, merge them all
+        # together, and then make sure that the boundary we've chosen isn't
+        # present in the payload.
+        msgtexts = []
+        subparts = msg.get_payload()
+        if subparts is None:
+            subparts = []
+        elif isinstance(subparts, str):
+            # e.g. a non-strict parse of a message with no starting boundary.
+            self.write(subparts)
+            return
+        elif not isinstance(subparts, list):
+            # Scalar payload
+            subparts = [subparts]
+        for part in subparts:
+            s = self._new_buffer()
+            g = self.clone(s)
+            g.flatten(part, unixfrom=False, linesep=self._NL)
+            msgtexts.append(s.getvalue())
+        # BAW: What about boundaries that are wrapped in double-quotes?
+        boundary = msg.get_boundary()
+        if not boundary:
+            # Create a boundary that doesn't appear in any of the
+            # message texts.
+            alltext = self._encoded_NL.join(msgtexts)
+            boundary = self._make_boundary(alltext)
+            msg.set_boundary(boundary)
+        # If there's a preamble, write it out, with a trailing CRLF
+        if msg.preamble is not None:
+            if self._mangle_from_:
+                preamble = fcre.sub('>From ', msg.preamble)
+            else:
+                preamble = msg.preamble
+            self._write_lines(preamble)
+            self.write(self._NL)
+        # dash-boundary transport-padding CRLF
+        self.write('--' + boundary + self._NL)
+        # body-part
+        if msgtexts:
+            self._fp.write(msgtexts.pop(0))
+        # *encapsulation
+        # --> delimiter transport-padding
+        # --> CRLF body-part
+        for body_part in msgtexts:
+            # delimiter transport-padding CRLF
+            self.write(self._NL + '--' + boundary + self._NL)
+            # body-part
+            self._fp.write(body_part)
+        # close-delimiter transport-padding
+        self.write(self._NL + '--' + boundary + '--' + self._NL)
+        if msg.epilogue is not None:
+            if self._mangle_from_:
+                epilogue = fcre.sub('>From ', msg.epilogue)
+            else:
+                epilogue = msg.epilogue
+            self._write_lines(epilogue)
+
+    def _handle_multipart_signed(self, msg):
+        # The contents of signed parts has to stay unmodified in order to keep
+        # the signature intact per RFC1847 2.1, so we disable header wrapping.
+        # RDM: This isn't enough to completely preserve the part, but it helps.
+        p = self.policy
+        self.policy = p.clone(max_line_length=0)
+        try:
+            self._handle_multipart(msg)
+        finally:
+            self.policy = p
+
+    def _handle_message_delivery_status(self, msg):
+        # We can't just write the headers directly to self's file object
+        # because this will leave an extra newline between the last header
+        # block and the boundary.  Sigh.
+        blocks = []
+        for part in msg.get_payload():
+            s = self._new_buffer()
+            g = self.clone(s)
+            g.flatten(part, unixfrom=False, linesep=self._NL)
+            text = s.getvalue()
+            lines = text.split(self._encoded_NL)
+            # Strip off the unnecessary trailing empty line
+            if lines and lines[-1] == self._encoded_EMPTY:
+                blocks.append(self._encoded_NL.join(lines[:-1]))
+            else:
+                blocks.append(text)
+        # Now join all the blocks with an empty line.  This has the lovely
+        # effect of separating each block with an empty line, but not adding
+        # an extra one after the last one.
+        self._fp.write(self._encoded_NL.join(blocks))
+
+    def _handle_message(self, msg):
+        s = self._new_buffer()
+        g = self.clone(s)
+        # The payload of a message/rfc822 part should be a multipart sequence
+        # of length 1.  The zeroth element of the list should be the Message
+        # object for the subpart.  Extract that object, stringify it, and
+        # write it out.
+        # Except, it turns out, when it's a string instead, which happens when
+        # and only when HeaderParser is used on a message of mime type
+        # message/rfc822.  Such messages are generated by, for example,
+        # Groupwise when forwarding unadorned messages.  (Issue 7970.)  So
+        # in that case we just emit the string body.
+        payload = msg._payload
+        if isinstance(payload, list):
+            g.flatten(msg.get_payload(0), unixfrom=False, linesep=self._NL)
+            payload = s.getvalue()
+        else:
+            payload = self._encode(payload)
+        self._fp.write(payload)
+
+    # This used to be a module level function; we use a classmethod for this
+    # and _compile_re so we can continue to provide the module level function
+    # for backward compatibility by doing
+    #   _make_boundary = Generator._make_boundary
+    # at the end of the module.  It *is* internal, so we could drop that...
+    @classmethod
+    def _make_boundary(cls, text=None):
+        # Craft a random boundary.  If text is given, ensure that the chosen
+        # boundary doesn't appear in the text.
+        token = random.randrange(sys.maxsize)
+        boundary = ('=' * 15) + (_fmt % token) + '=='
+        if text is None:
+            return boundary
+        b = boundary
+        counter = 0
+        while True:
+            cre = cls._compile_re('^--' + re.escape(b) + '(--)?$', re.MULTILINE)
+            if not cre.search(text):
+                break
+            b = boundary + '.' + str(counter)
+            counter += 1
+        return b
+
+    @classmethod
+    def _compile_re(cls, s, flags):
+        return re.compile(s, flags)
+
+
+class BytesGenerator(Generator):
+    """Generates a bytes version of a Message object tree.
+
+    Functionally identical to the base Generator except that the output is
+    bytes and not string.  When surrogates were used in the input to encode
+    bytes, these are decoded back to bytes for output.  If the policy has
+    cte_type set to 7bit, then the message is transformed such that the
+    non-ASCII bytes are properly content transfer encoded, using the charset
+    unknown-8bit.
+
+    The outfp object must accept bytes in its write method.
+    """
+
+    def write(self, s):
+        self._fp.write(s.encode('ascii', 'surrogateescape'))
+
+    def _new_buffer(self):
+        return BytesIO()
+
+    def _encode(self, s):
+        return s.encode('ascii')
+
+    def _write_headers(self, msg):
+        # This is almost the same as the string version, except for handling
+        # strings with 8bit bytes.
+        for h, v in msg.raw_items():
+            folded = self.policy.fold_binary(h, v)
+            if self.policy.verify_generated_headers:
+                linesep = self.policy.linesep.encode()
+                if not folded.endswith(linesep):
+                    raise HeaderWriteError(
+                        f'folded header does not end with {linesep!r}: {folded!r}')
+                if NEWLINE_WITHOUT_FWSP_BYTES.search(folded.removesuffix(linesep)):
+                    raise HeaderWriteError(
+                        f'folded header contains newline: {folded!r}')
+            self._fp.write(folded)
+        # A blank line always separates headers from body
+        self.write(self._NL)
+
+    def _handle_text(self, msg):
+        # If the string has surrogates the original source was bytes, so
+        # just write it back out.
+        if msg._payload is None:
+            return
+        if _has_surrogates(msg._payload) and not self.policy.cte_type=='7bit':
+            if self._mangle_from_:
+                msg._payload = fcre.sub(">From ", msg._payload)
+            self._write_lines(msg._payload)
+        else:
+            super(BytesGenerator,self)._handle_text(msg)
+
+    # Default body handler
+    _writeBody = _handle_text
+
+    @classmethod
+    def _compile_re(cls, s, flags):
+        return re.compile(s.encode('ascii'), flags)
+
+
+_FMT = '[Non-text (%(type)s) part of message omitted, filename %(filename)s]'
+
+class DecodedGenerator(Generator):
+    """Generates a text representation of a message.
+
+    Like the Generator base class, except that non-text parts are substituted
+    with a format string representing the part.
+    """
+    def __init__(self, outfp, mangle_from_=None, maxheaderlen=None, fmt=None, *,
+                 policy=None):
+        """Like Generator.__init__() except that an additional optional
+        argument is allowed.
+
+        Walks through all subparts of a message.  If the subpart is of main
+        type 'text', then it prints the decoded payload of the subpart.
+
+        Otherwise, fmt is a format string that is used instead of the message
+        payload.  fmt is expanded with the following keywords (in
+        %(keyword)s format):
+
+        type       : Full MIME type of the non-text part
+        maintype   : Main MIME type of the non-text part
+        subtype    : Sub-MIME type of the non-text part
+        filename   : Filename of the non-text part
+        description: Description associated with the non-text part
+        encoding   : Content transfer encoding of the non-text part
+
+        The default value for fmt is None, meaning
+
+        [Non-text (%(type)s) part of message omitted, filename %(filename)s]
+        """
+        Generator.__init__(self, outfp, mangle_from_, maxheaderlen,
+                           policy=policy)
+        if fmt is None:
+            self._fmt = _FMT
+        else:
+            self._fmt = fmt
+
+    def _dispatch(self, msg):
+        for part in msg.walk():
+            maintype = part.get_content_maintype()
+            if maintype == 'text':
+                print(part.get_payload(decode=False), file=self)
+            elif maintype == 'multipart':
+                # Just skip this
+                pass
+            else:
+                print(self._fmt % {
+                    'type'       : part.get_content_type(),
+                    'maintype'   : part.get_content_maintype(),
+                    'subtype'    : part.get_content_subtype(),
+                    'filename'   : part.get_filename('[no filename]'),
+                    'description': part.get('Content-Description',
+                                            '[no description]'),
+                    'encoding'   : part.get('Content-Transfer-Encoding',
+                                            '[no encoding]'),
+                    }, file=self)
+
+
+# Helper used by Generator._make_boundary
+_width = len(repr(sys.maxsize-1))
+_fmt = '%%0%dd' % _width
+
+# Backward compatibility
+_make_boundary = Generator._make_boundary
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/header.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/header.py
new file mode 100644
index 0000000000000000000000000000000000000000..220a84a7454b214fc0ca056cf51e1edf5dd61b65
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/header.py
@@ -0,0 +1,582 @@
+# Copyright (C) 2002 Python Software Foundation
+# Author: Ben Gertzfield, Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Header encoding and decoding functionality."""
+
+__all__ = [
+    'Header',
+    'decode_header',
+    'make_header',
+    ]
+
+import re
+import binascii
+
+import email.quoprimime
+import email.base64mime
+
+from email.errors import HeaderParseError
+from email import charset as _charset
+Charset = _charset.Charset
+
+NL = '\n'
+SPACE = ' '
+BSPACE = b' '
+SPACE8 = ' ' * 8
+EMPTYSTRING = ''
+MAXLINELEN = 78
+FWS = ' \t'
+
+USASCII = Charset('us-ascii')
+UTF8 = Charset('utf-8')
+
+# Match encoded-word strings in the form =?charset?q?Hello_World?=
+ecre = re.compile(r'''
+  =\?                   # literal =?
+  (?P<charset>[^?]*?)   # non-greedy up to the next ? is the charset
+  \?                    # literal ?
+  (?P<encoding>[qQbB])  # either a "q" or a "b", case insensitive
+  \?                    # literal ?
+  (?P<encoded>.*?)      # non-greedy up to the next ?= is the encoded string
+  \?=                   # literal ?=
+  ''', re.VERBOSE | re.MULTILINE)
+
+# Field name regexp, including trailing colon, but not separating whitespace,
+# according to RFC 2822.  Character range is from tilde to exclamation mark.
+# For use with .match()
+fcre = re.compile(r'[\041-\176]+:$')
+
+# Find a header embedded in a putative header value.  Used to check for
+# header injection attack.
+_embedded_header = re.compile(r'\n[^ \t]+:')
+
+
+# Helpers
+_max_append = email.quoprimime._max_append
+
+
+def decode_header(header):
+    """Decode a message header value without converting charset.
+
+    For historical reasons, this function may return either:
+
+    1. A list of length 1 containing a pair (str, None).
+    2. A list of (bytes, charset) pairs containing each of the decoded
+       parts of the header.  Charset is None for non-encoded parts of the header,
+       otherwise a lower-case string containing the name of the character set
+       specified in the encoded string.
+
+    header may be a string that may or may not contain RFC2047 encoded words,
+    or it may be a Header object.
+
+    An email.errors.HeaderParseError may be raised when certain decoding error
+    occurs (e.g. a base64 decoding exception).
+
+    This function exists for backwards compatibility only. For new code, we
+    recommend using email.headerregistry.HeaderRegistry instead.
+    """
+    # If it is a Header object, we can just return the encoded chunks.
+    if hasattr(header, '_chunks'):
+        return [(_charset._encode(string, str(charset)), str(charset))
+                    for string, charset in header._chunks]
+    # If no encoding, just return the header with no charset.
+    if not ecre.search(header):
+        return [(header, None)]
+    # First step is to parse all the encoded parts into triplets of the form
+    # (encoded_string, encoding, charset).  For unencoded strings, the last
+    # two parts will be None.
+    words = []
+    for line in header.splitlines():
+        parts = ecre.split(line)
+        first = True
+        while parts:
+            unencoded = parts.pop(0)
+            if first:
+                unencoded = unencoded.lstrip()
+                first = False
+            if unencoded:
+                words.append((unencoded, None, None))
+            if parts:
+                charset = parts.pop(0).lower()
+                encoding = parts.pop(0).lower()
+                encoded = parts.pop(0)
+                words.append((encoded, encoding, charset))
+    # Now loop over words and remove words that consist of whitespace
+    # between two encoded strings.
+    droplist = []
+    for n, w in enumerate(words):
+        if n>1 and w[1] and words[n-2][1] and words[n-1][0].isspace():
+            droplist.append(n-1)
+    for d in reversed(droplist):
+        del words[d]
+
+    # The next step is to decode each encoded word by applying the reverse
+    # base64 or quopri transformation.  decoded_words is now a list of the
+    # form (decoded_word, charset).
+    decoded_words = []
+    for encoded_string, encoding, charset in words:
+        if encoding is None:
+            # This is an unencoded word.
+            decoded_words.append((encoded_string, charset))
+        elif encoding == 'q':
+            word = email.quoprimime.header_decode(encoded_string)
+            decoded_words.append((word, charset))
+        elif encoding == 'b':
+            paderr = len(encoded_string) % 4   # Postel's law: add missing padding
+            if paderr:
+                encoded_string += '==='[:4 - paderr]
+            try:
+                word = email.base64mime.decode(encoded_string)
+            except binascii.Error:
+                raise HeaderParseError('Base64 decoding error')
+            else:
+                decoded_words.append((word, charset))
+        else:
+            raise AssertionError('Unexpected encoding: ' + encoding)
+    # Now convert all words to bytes and collapse consecutive runs of
+    # similarly encoded words.
+    collapsed = []
+    last_word = last_charset = None
+    for word, charset in decoded_words:
+        if isinstance(word, str):
+            word = bytes(word, 'raw-unicode-escape')
+        if last_word is None:
+            last_word = word
+            last_charset = charset
+        elif charset != last_charset:
+            collapsed.append((last_word, last_charset))
+            last_word = word
+            last_charset = charset
+        elif last_charset is None:
+            last_word += BSPACE + word
+        else:
+            last_word += word
+    collapsed.append((last_word, last_charset))
+    return collapsed
+
+
+def make_header(decoded_seq, maxlinelen=None, header_name=None,
+                continuation_ws=' '):
+    """Create a Header from a sequence of pairs as returned by decode_header()
+
+    decode_header() takes a header value string and returns a sequence of
+    pairs of the format (decoded_string, charset) where charset is the string
+    name of the character set.
+
+    This function takes one of those sequence of pairs and returns a Header
+    instance.  Optional maxlinelen, header_name, and continuation_ws are as in
+    the Header constructor.
+
+    This function exists for backwards compatibility only, and is not
+    recommended for use in new code.
+    """
+    h = Header(maxlinelen=maxlinelen, header_name=header_name,
+               continuation_ws=continuation_ws)
+    for s, charset in decoded_seq:
+        # None means us-ascii but we can simply pass it on to h.append()
+        if charset is not None and not isinstance(charset, Charset):
+            charset = Charset(charset)
+        h.append(s, charset)
+    return h
+
+
+class Header:
+    def __init__(self, s=None, charset=None,
+                 maxlinelen=None, header_name=None,
+                 continuation_ws=' ', errors='strict'):
+        """Create a MIME-compliant header that can contain many character sets.
+
+        Optional s is the initial header value.  If None, the initial header
+        value is not set.  You can later append to the header with .append()
+        method calls.  s may be a byte string or a Unicode string, but see the
+        .append() documentation for semantics.
+
+        Optional charset serves two purposes: it has the same meaning as the
+        charset argument to the .append() method.  It also sets the default
+        character set for all subsequent .append() calls that omit the charset
+        argument.  If charset is not provided in the constructor, the us-ascii
+        charset is used both as s's initial charset and as the default for
+        subsequent .append() calls.
+
+        The maximum line length can be specified explicitly via maxlinelen. For
+        splitting the first line to a shorter value (to account for the field
+        header which isn't included in s, e.g. 'Subject') pass in the name of
+        the field in header_name.  The default maxlinelen is 78 as recommended
+        by RFC 2822.
+
+        continuation_ws must be RFC 2822 compliant folding whitespace (usually
+        either a space or a hard tab) which will be prepended to continuation
+        lines.
+
+        errors is passed through to the .append() call.
+        """
+        if charset is None:
+            charset = USASCII
+        elif not isinstance(charset, Charset):
+            charset = Charset(charset)
+        self._charset = charset
+        self._continuation_ws = continuation_ws
+        self._chunks = []
+        if s is not None:
+            self.append(s, charset, errors)
+        if maxlinelen is None:
+            maxlinelen = MAXLINELEN
+        self._maxlinelen = maxlinelen
+        if header_name is None:
+            self._headerlen = 0
+        else:
+            # Take the separating colon and space into account.
+            self._headerlen = len(header_name) + 2
+
+    def __str__(self):
+        """Return the string value of the header."""
+        self._normalize()
+        uchunks = []
+        lastcs = None
+        lastspace = None
+        for string, charset in self._chunks:
+            # We must preserve spaces between encoded and non-encoded word
+            # boundaries, which means for us we need to add a space when we go
+            # from a charset to None/us-ascii, or from None/us-ascii to a
+            # charset.  Only do this for the second and subsequent chunks.
+            # Don't add a space if the None/us-ascii string already has
+            # a space (trailing or leading depending on transition)
+            nextcs = charset
+            if nextcs == _charset.UNKNOWN8BIT:
+                original_bytes = string.encode('ascii', 'surrogateescape')
+                string = original_bytes.decode('ascii', 'replace')
+            if uchunks:
+                hasspace = string and self._nonctext(string[0])
+                if lastcs not in (None, 'us-ascii'):
+                    if nextcs in (None, 'us-ascii') and not hasspace:
+                        uchunks.append(SPACE)
+                        nextcs = None
+                elif nextcs not in (None, 'us-ascii') and not lastspace:
+                    uchunks.append(SPACE)
+            lastspace = string and self._nonctext(string[-1])
+            lastcs = nextcs
+            uchunks.append(string)
+        return EMPTYSTRING.join(uchunks)
+
+    # Rich comparison operators for equality only.  BAW: does it make sense to
+    # have or explicitly disable <, <=, >, >= operators?
+    def __eq__(self, other):
+        # other may be a Header or a string.  Both are fine so coerce
+        # ourselves to a unicode (of the unencoded header value), swap the
+        # args and do another comparison.
+        return other == str(self)
+
+    def append(self, s, charset=None, errors='strict'):
+        """Append a string to the MIME header.
+
+        Optional charset, if given, should be a Charset instance or the name
+        of a character set (which will be converted to a Charset instance).  A
+        value of None (the default) means that the charset given in the
+        constructor is used.
+
+        s may be a byte string or a Unicode string.  If it is a byte string
+        (i.e. isinstance(s, str) is false), then charset is the encoding of
+        that byte string, and a UnicodeError will be raised if the string
+        cannot be decoded with that charset.  If s is a Unicode string, then
+        charset is a hint specifying the character set of the characters in
+        the string.  In either case, when producing an RFC 2822 compliant
+        header using RFC 2047 rules, the string will be encoded using the
+        output codec of the charset.  If the string cannot be encoded to the
+        output codec, a UnicodeError will be raised.
+
+        Optional 'errors' is passed as the errors argument to the decode
+        call if s is a byte string.
+        """
+        if charset is None:
+            charset = self._charset
+        elif not isinstance(charset, Charset):
+            charset = Charset(charset)
+        if not isinstance(s, str):
+            input_charset = charset.input_codec or 'us-ascii'
+            if input_charset == _charset.UNKNOWN8BIT:
+                s = s.decode('us-ascii', 'surrogateescape')
+            else:
+                s = s.decode(input_charset, errors)
+        # Ensure that the bytes we're storing can be decoded to the output
+        # character set, otherwise an early error is raised.
+        output_charset = charset.output_codec or 'us-ascii'
+        if output_charset != _charset.UNKNOWN8BIT:
+            try:
+                s.encode(output_charset, errors)
+            except UnicodeEncodeError:
+                if output_charset!='us-ascii':
+                    raise
+                charset = UTF8
+        self._chunks.append((s, charset))
+
+    def _nonctext(self, s):
+        """True if string s is not a ctext character of RFC822.
+        """
+        return s.isspace() or s in ('(', ')', '\\')
+
+    def encode(self, splitchars=';, \t', maxlinelen=None, linesep='\n'):
+        r"""Encode a message header into an RFC-compliant format.
+
+        There are many issues involved in converting a given string for use in
+        an email header.  Only certain character sets are readable in most
+        email clients, and as header strings can only contain a subset of
+        7-bit ASCII, care must be taken to properly convert and encode (with
+        Base64 or quoted-printable) header strings.  In addition, there is a
+        75-character length limit on any given encoded header field, so
+        line-wrapping must be performed, even with double-byte character sets.
+
+        Optional maxlinelen specifies the maximum length of each generated
+        line, exclusive of the linesep string.  Individual lines may be longer
+        than maxlinelen if a folding point cannot be found.  The first line
+        will be shorter by the length of the header name plus ": " if a header
+        name was specified at Header construction time.  The default value for
+        maxlinelen is determined at header construction time.
+
+        Optional splitchars is a string containing characters which should be
+        given extra weight by the splitting algorithm during normal header
+        wrapping.  This is in very rough support of RFC 2822's 'higher level
+        syntactic breaks':  split points preceded by a splitchar are preferred
+        during line splitting, with the characters preferred in the order in
+        which they appear in the string.  Space and tab may be included in the
+        string to indicate whether preference should be given to one over the
+        other as a split point when other split chars do not appear in the line
+        being split.  Splitchars does not affect RFC 2047 encoded lines.
+
+        Optional linesep is a string to be used to separate the lines of
+        the value.  The default value is the most useful for typical
+        Python applications, but it can be set to \r\n to produce RFC-compliant
+        line separators when needed.
+        """
+        self._normalize()
+        if maxlinelen is None:
+            maxlinelen = self._maxlinelen
+        # A maxlinelen of 0 means don't wrap.  For all practical purposes,
+        # choosing a huge number here accomplishes that and makes the
+        # _ValueFormatter algorithm much simpler.
+        if maxlinelen == 0:
+            maxlinelen = 1000000
+        formatter = _ValueFormatter(self._headerlen, maxlinelen,
+                                    self._continuation_ws, splitchars)
+        lastcs = None
+        hasspace = lastspace = None
+        for string, charset in self._chunks:
+            if hasspace is not None:
+                hasspace = string and self._nonctext(string[0])
+                if lastcs not in (None, 'us-ascii'):
+                    if not hasspace or charset not in (None, 'us-ascii'):
+                        formatter.add_transition()
+                elif charset not in (None, 'us-ascii') and not lastspace:
+                    formatter.add_transition()
+            lastspace = string and self._nonctext(string[-1])
+            lastcs = charset
+            hasspace = False
+            lines = string.splitlines()
+            if lines:
+                formatter.feed('', lines[0], charset)
+            else:
+                formatter.feed('', '', charset)
+            for line in lines[1:]:
+                formatter.newline()
+                if charset.header_encoding is not None:
+                    formatter.feed(self._continuation_ws, ' ' + line.lstrip(),
+                                   charset)
+                else:
+                    sline = line.lstrip()
+                    fws = line[:len(line)-len(sline)]
+                    formatter.feed(fws, sline, charset)
+            if len(lines) > 1:
+                formatter.newline()
+        if self._chunks:
+            formatter.add_transition()
+        value = formatter._str(linesep)
+        if _embedded_header.search(value):
+            raise HeaderParseError("header value appears to contain "
+                "an embedded header: {!r}".format(value))
+        return value
+
+    def _normalize(self):
+        # Step 1: Normalize the chunks so that all runs of identical charsets
+        # get collapsed into a single unicode string.
+        chunks = []
+        last_charset = None
+        last_chunk = []
+        for string, charset in self._chunks:
+            if charset == last_charset:
+                last_chunk.append(string)
+            else:
+                if last_charset is not None:
+                    chunks.append((SPACE.join(last_chunk), last_charset))
+                last_chunk = [string]
+                last_charset = charset
+        if last_chunk:
+            chunks.append((SPACE.join(last_chunk), last_charset))
+        self._chunks = chunks
+
+
+class _ValueFormatter:
+    def __init__(self, headerlen, maxlen, continuation_ws, splitchars):
+        self._maxlen = maxlen
+        self._continuation_ws = continuation_ws
+        self._continuation_ws_len = len(continuation_ws)
+        self._splitchars = splitchars
+        self._lines = []
+        self._current_line = _Accumulator(headerlen)
+
+    def _str(self, linesep):
+        self.newline()
+        return linesep.join(self._lines)
+
+    def __str__(self):
+        return self._str(NL)
+
+    def newline(self):
+        end_of_line = self._current_line.pop()
+        if end_of_line != (' ', ''):
+            self._current_line.push(*end_of_line)
+        if len(self._current_line) > 0:
+            if self._current_line.is_onlyws() and self._lines:
+                self._lines[-1] += str(self._current_line)
+            else:
+                self._lines.append(str(self._current_line))
+        self._current_line.reset()
+
+    def add_transition(self):
+        self._current_line.push(' ', '')
+
+    def feed(self, fws, string, charset):
+        # If the charset has no header encoding (i.e. it is an ASCII encoding)
+        # then we must split the header at the "highest level syntactic break"
+        # possible. Note that we don't have a lot of smarts about field
+        # syntax; we just try to break on semi-colons, then commas, then
+        # whitespace.  Eventually, this should be pluggable.
+        if charset.header_encoding is None:
+            self._ascii_split(fws, string, self._splitchars)
+            return
+        # Otherwise, we're doing either a Base64 or a quoted-printable
+        # encoding which means we don't need to split the line on syntactic
+        # breaks.  We can basically just find enough characters to fit on the
+        # current line, minus the RFC 2047 chrome.  What makes this trickier
+        # though is that we have to split at octet boundaries, not character
+        # boundaries but it's only safe to split at character boundaries so at
+        # best we can only get close.
+        encoded_lines = charset.header_encode_lines(string, self._maxlengths())
+        # The first element extends the current line, but if it's None then
+        # nothing more fit on the current line so start a new line.
+        try:
+            first_line = encoded_lines.pop(0)
+        except IndexError:
+            # There are no encoded lines, so we're done.
+            return
+        if first_line is not None:
+            self._append_chunk(fws, first_line)
+        try:
+            last_line = encoded_lines.pop()
+        except IndexError:
+            # There was only one line.
+            return
+        self.newline()
+        self._current_line.push(self._continuation_ws, last_line)
+        # Everything else are full lines in themselves.
+        for line in encoded_lines:
+            self._lines.append(self._continuation_ws + line)
+
+    def _maxlengths(self):
+        # The first line's length.
+        yield self._maxlen - len(self._current_line)
+        while True:
+            yield self._maxlen - self._continuation_ws_len
+
+    def _ascii_split(self, fws, string, splitchars):
+        # The RFC 2822 header folding algorithm is simple in principle but
+        # complex in practice.  Lines may be folded any place where "folding
+        # white space" appears by inserting a linesep character in front of the
+        # FWS.  The complication is that not all spaces or tabs qualify as FWS,
+        # and we are also supposed to prefer to break at "higher level
+        # syntactic breaks".  We can't do either of these without intimate
+        # knowledge of the structure of structured headers, which we don't have
+        # here.  So the best we can do here is prefer to break at the specified
+        # splitchars, and hope that we don't choose any spaces or tabs that
+        # aren't legal FWS.  (This is at least better than the old algorithm,
+        # where we would sometimes *introduce* FWS after a splitchar, or the
+        # algorithm before that, where we would turn all white space runs into
+        # single spaces or tabs.)
+        parts = re.split("(["+FWS+"]+)", fws+string)
+        if parts[0]:
+            parts[:0] = ['']
+        else:
+            parts.pop(0)
+        for fws, part in zip(*[iter(parts)]*2):
+            self._append_chunk(fws, part)
+
+    def _append_chunk(self, fws, string):
+        self._current_line.push(fws, string)
+        if len(self._current_line) > self._maxlen:
+            # Find the best split point, working backward from the end.
+            # There might be none, on a long first line.
+            for ch in self._splitchars:
+                for i in range(self._current_line.part_count()-1, 0, -1):
+                    if ch.isspace():
+                        fws = self._current_line[i][0]
+                        if fws and fws[0]==ch:
+                            break
+                    prevpart = self._current_line[i-1][1]
+                    if prevpart and prevpart[-1]==ch:
+                        break
+                else:
+                    continue
+                break
+            else:
+                fws, part = self._current_line.pop()
+                if self._current_line._initial_size > 0:
+                    # There will be a header, so leave it on a line by itself.
+                    self.newline()
+                    if not fws:
+                        # We don't use continuation_ws here because the whitespace
+                        # after a header should always be a space.
+                        fws = ' '
+                self._current_line.push(fws, part)
+                return
+            remainder = self._current_line.pop_from(i)
+            self._lines.append(str(self._current_line))
+            self._current_line.reset(remainder)
+
+
+class _Accumulator(list):
+
+    def __init__(self, initial_size=0):
+        self._initial_size = initial_size
+        super().__init__()
+
+    def push(self, fws, string):
+        self.append((fws, string))
+
+    def pop_from(self, i=0):
+        popped = self[i:]
+        self[i:] = []
+        return popped
+
+    def pop(self):
+        if self.part_count()==0:
+            return ('', '')
+        return super().pop()
+
+    def __len__(self):
+        return sum((len(fws)+len(part) for fws, part in self),
+                   self._initial_size)
+
+    def __str__(self):
+        return EMPTYSTRING.join((EMPTYSTRING.join((fws, part))
+                                for fws, part in self))
+
+    def reset(self, startval=None):
+        if startval is None:
+            startval = []
+        self[:] = startval
+        self._initial_size = 0
+
+    def is_onlyws(self):
+        return self._initial_size==0 and (not self or str(self).isspace())
+
+    def part_count(self):
+        return super().__len__()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/headerregistry.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/headerregistry.py
new file mode 100644
index 0000000000000000000000000000000000000000..0e8698efc0b96676c79a656fc49a9f6e1492807d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/headerregistry.py
@@ -0,0 +1,618 @@
+"""Representing and manipulating email headers via custom objects.
+
+This module provides an implementation of the HeaderRegistry API.
+The implementation is designed to flexibly follow RFC5322 rules.
+"""
+from types import MappingProxyType
+
+from email import utils
+from email import errors
+from email import _header_value_parser as parser
+
+class Address:
+
+    def __init__(self, display_name='', username='', domain='', addr_spec=None):
+        """Create an object representing a full email address.
+
+        An address can have a 'display_name', a 'username', and a 'domain'.  In
+        addition to specifying the username and domain separately, they may be
+        specified together by using the addr_spec keyword *instead of* the
+        username and domain keywords.  If an addr_spec string is specified it
+        must be properly quoted according to RFC 5322 rules; an error will be
+        raised if it is not.
+
+        An Address object has display_name, username, domain, and addr_spec
+        attributes, all of which are read-only.  The addr_spec and the string
+        value of the object are both quoted according to RFC5322 rules, but
+        without any Content Transfer Encoding.
+
+        """
+
+        inputs = ''.join(filter(None, (display_name, username, domain, addr_spec)))
+        if '\r' in inputs or '\n' in inputs:
+            raise ValueError("invalid arguments; address parts cannot contain CR or LF")
+
+        # This clause with its potential 'raise' may only happen when an
+        # application program creates an Address object using an addr_spec
+        # keyword.  The email library code itself must always supply username
+        # and domain.
+        if addr_spec is not None:
+            if username or domain:
+                raise TypeError("addrspec specified when username and/or "
+                                "domain also specified")
+            a_s, rest = parser.get_addr_spec(addr_spec)
+            if rest:
+                raise ValueError("Invalid addr_spec; only '{}' "
+                                 "could be parsed from '{}'".format(
+                                    a_s, addr_spec))
+            if a_s.all_defects:
+                raise a_s.all_defects[0]
+            username = a_s.local_part
+            domain = a_s.domain
+        self._display_name = display_name
+        self._username = username
+        self._domain = domain
+
+    @property
+    def display_name(self):
+        return self._display_name
+
+    @property
+    def username(self):
+        return self._username
+
+    @property
+    def domain(self):
+        return self._domain
+
+    @property
+    def addr_spec(self):
+        """The addr_spec (username@domain) portion of the address, quoted
+        according to RFC 5322 rules, but with no Content Transfer Encoding.
+        """
+        lp = self.username
+        if not parser.DOT_ATOM_ENDS.isdisjoint(lp):
+            lp = parser.quote_string(lp)
+        if self.domain:
+            return lp + '@' + self.domain
+        if not lp:
+            return '<>'
+        return lp
+
+    def __repr__(self):
+        return "{}(display_name={!r}, username={!r}, domain={!r})".format(
+                        self.__class__.__name__,
+                        self.display_name, self.username, self.domain)
+
+    def __str__(self):
+        disp = self.display_name
+        if not parser.SPECIALS.isdisjoint(disp):
+            disp = parser.quote_string(disp)
+        if disp:
+            addr_spec = '' if self.addr_spec=='<>' else self.addr_spec
+            return "{} <{}>".format(disp, addr_spec)
+        return self.addr_spec
+
+    def __eq__(self, other):
+        if not isinstance(other, Address):
+            return NotImplemented
+        return (self.display_name == other.display_name and
+                self.username == other.username and
+                self.domain == other.domain)
+
+
+class Group:
+
+    def __init__(self, display_name=None, addresses=None):
+        """Create an object representing an address group.
+
+        An address group consists of a display_name followed by colon and a
+        list of addresses (see Address) terminated by a semi-colon.  The Group
+        is created by specifying a display_name and a possibly empty list of
+        Address objects.  A Group can also be used to represent a single
+        address that is not in a group, which is convenient when manipulating
+        lists that are a combination of Groups and individual Addresses.  In
+        this case the display_name should be set to None.  In particular, the
+        string representation of a Group whose display_name is None is the same
+        as the Address object, if there is one and only one Address object in
+        the addresses list.
+
+        """
+        self._display_name = display_name
+        self._addresses = tuple(addresses) if addresses else tuple()
+
+    @property
+    def display_name(self):
+        return self._display_name
+
+    @property
+    def addresses(self):
+        return self._addresses
+
+    def __repr__(self):
+        return "{}(display_name={!r}, addresses={!r}".format(
+                 self.__class__.__name__,
+                 self.display_name, self.addresses)
+
+    def __str__(self):
+        if self.display_name is None and len(self.addresses)==1:
+            return str(self.addresses[0])
+        disp = self.display_name
+        if disp is not None and not parser.SPECIALS.isdisjoint(disp):
+            disp = parser.quote_string(disp)
+        adrstr = ", ".join(str(x) for x in self.addresses)
+        adrstr = ' ' + adrstr if adrstr else adrstr
+        return "{}:{};".format(disp, adrstr)
+
+    def __eq__(self, other):
+        if not isinstance(other, Group):
+            return NotImplemented
+        return (self.display_name == other.display_name and
+                self.addresses == other.addresses)
+
+
+# Header Classes #
+
+class BaseHeader(str):
+
+    """Base class for message headers.
+
+    Implements generic behavior and provides tools for subclasses.
+
+    A subclass must define a classmethod named 'parse' that takes an unfolded
+    value string and a dictionary as its arguments.  The dictionary will
+    contain one key, 'defects', initialized to an empty list.  After the call
+    the dictionary must contain two additional keys: parse_tree, set to the
+    parse tree obtained from parsing the header, and 'decoded', set to the
+    string value of the idealized representation of the data from the value.
+    (That is, encoded words are decoded, and values that have canonical
+    representations are so represented.)
+
+    The defects key is intended to collect parsing defects, which the message
+    parser will subsequently dispose of as appropriate.  The parser should not,
+    insofar as practical, raise any errors.  Defects should be added to the
+    list instead.  The standard header parsers register defects for RFC
+    compliance issues, for obsolete RFC syntax, and for unrecoverable parsing
+    errors.
+
+    The parse method may add additional keys to the dictionary.  In this case
+    the subclass must define an 'init' method, which will be passed the
+    dictionary as its keyword arguments.  The method should use (usually by
+    setting them as the value of similarly named attributes) and remove all the
+    extra keys added by its parse method, and then use super to call its parent
+    class with the remaining arguments and keywords.
+
+    The subclass should also make sure that a 'max_count' attribute is defined
+    that is either None or 1. XXX: need to better define this API.
+
+    """
+
+    def __new__(cls, name, value):
+        kwds = {'defects': []}
+        cls.parse(value, kwds)
+        if utils._has_surrogates(kwds['decoded']):
+            kwds['decoded'] = utils._sanitize(kwds['decoded'])
+        self = str.__new__(cls, kwds['decoded'])
+        del kwds['decoded']
+        self.init(name, **kwds)
+        return self
+
+    def init(self, name, *, parse_tree, defects):
+        self._name = name
+        self._parse_tree = parse_tree
+        self._defects = defects
+
+    @property
+    def name(self):
+        return self._name
+
+    @property
+    def defects(self):
+        return tuple(self._defects)
+
+    def __reduce__(self):
+        return (
+            _reconstruct_header,
+            (
+                self.__class__.__name__,
+                self.__class__.__bases__,
+                str(self),
+            ),
+            self.__getstate__())
+
+    @classmethod
+    def _reconstruct(cls, value):
+        return str.__new__(cls, value)
+
+    def fold(self, *, policy):
+        """Fold header according to policy.
+
+        The parsed representation of the header is folded according to
+        RFC5322 rules, as modified by the policy.  If the parse tree
+        contains surrogateescaped bytes, the bytes are CTE encoded using
+        the charset 'unknown-8bit".
+
+        Any non-ASCII characters in the parse tree are CTE encoded using
+        charset utf-8. XXX: make this a policy setting.
+
+        The returned value is an ASCII-only string possibly containing linesep
+        characters, and ending with a linesep character.  The string includes
+        the header name and the ': ' separator.
+
+        """
+        # At some point we need to put fws here if it was in the source.
+        header = parser.Header([
+            parser.HeaderLabel([
+                parser.ValueTerminal(self.name, 'header-name'),
+                parser.ValueTerminal(':', 'header-sep')]),
+            ])
+        if self._parse_tree:
+            header.append(
+                parser.CFWSList([parser.WhiteSpaceTerminal(' ', 'fws')]))
+        header.append(self._parse_tree)
+        return header.fold(policy=policy)
+
+
+def _reconstruct_header(cls_name, bases, value):
+    return type(cls_name, bases, {})._reconstruct(value)
+
+
+class UnstructuredHeader:
+
+    max_count = None
+    value_parser = staticmethod(parser.get_unstructured)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = cls.value_parser(value)
+        kwds['decoded'] = str(kwds['parse_tree'])
+
+
+class UniqueUnstructuredHeader(UnstructuredHeader):
+
+    max_count = 1
+
+
+class DateHeader:
+
+    """Header whose value consists of a single timestamp.
+
+    Provides an additional attribute, datetime, which is either an aware
+    datetime using a timezone, or a naive datetime if the timezone
+    in the input string is -0000.  Also accepts a datetime as input.
+    The 'value' attribute is the normalized form of the timestamp,
+    which means it is the output of format_datetime on the datetime.
+    """
+
+    max_count = None
+
+    # This is used only for folding, not for creating 'decoded'.
+    value_parser = staticmethod(parser.get_unstructured)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        if not value:
+            kwds['defects'].append(errors.HeaderMissingRequiredValue())
+            kwds['datetime'] = None
+            kwds['decoded'] = ''
+            kwds['parse_tree'] = parser.TokenList()
+            return
+        if isinstance(value, str):
+            kwds['decoded'] = value
+            try:
+                value = utils.parsedate_to_datetime(value)
+            except ValueError:
+                kwds['defects'].append(errors.InvalidDateDefect('Invalid date value or format'))
+                kwds['datetime'] = None
+                kwds['parse_tree'] = parser.TokenList()
+                return
+        kwds['datetime'] = value
+        kwds['decoded'] = utils.format_datetime(kwds['datetime'])
+        kwds['parse_tree'] = cls.value_parser(kwds['decoded'])
+
+    def init(self, *args, **kw):
+        self._datetime = kw.pop('datetime')
+        super().init(*args, **kw)
+
+    @property
+    def datetime(self):
+        return self._datetime
+
+
+class UniqueDateHeader(DateHeader):
+
+    max_count = 1
+
+
+class AddressHeader:
+
+    max_count = None
+
+    @staticmethod
+    def value_parser(value):
+        address_list, value = parser.get_address_list(value)
+        assert not value, 'this should not happen'
+        return address_list
+
+    @classmethod
+    def parse(cls, value, kwds):
+        if isinstance(value, str):
+            # We are translating here from the RFC language (address/mailbox)
+            # to our API language (group/address).
+            kwds['parse_tree'] = address_list = cls.value_parser(value)
+            groups = []
+            for addr in address_list.addresses:
+                groups.append(Group(addr.display_name,
+                                    [Address(mb.display_name or '',
+                                             mb.local_part or '',
+                                             mb.domain or '')
+                                     for mb in addr.all_mailboxes]))
+            defects = list(address_list.all_defects)
+        else:
+            # Assume it is Address/Group stuff
+            if not hasattr(value, '__iter__'):
+                value = [value]
+            groups = [Group(None, [item]) if not hasattr(item, 'addresses')
+                                          else item
+                                    for item in value]
+            defects = []
+        kwds['groups'] = groups
+        kwds['defects'] = defects
+        kwds['decoded'] = ', '.join([str(item) for item in groups])
+        if 'parse_tree' not in kwds:
+            kwds['parse_tree'] = cls.value_parser(kwds['decoded'])
+
+    def init(self, *args, **kw):
+        self._groups = tuple(kw.pop('groups'))
+        self._addresses = None
+        super().init(*args, **kw)
+
+    @property
+    def groups(self):
+        return self._groups
+
+    @property
+    def addresses(self):
+        if self._addresses is None:
+            self._addresses = tuple(address for group in self._groups
+                                            for address in group.addresses)
+        return self._addresses
+
+
+class UniqueAddressHeader(AddressHeader):
+
+    max_count = 1
+
+
+class SingleAddressHeader(AddressHeader):
+
+    @property
+    def address(self):
+        if len(self.addresses)!=1:
+            raise ValueError(("value of single address header {} is not "
+                "a single address").format(self.name))
+        return self.addresses[0]
+
+
+class UniqueSingleAddressHeader(SingleAddressHeader):
+
+    max_count = 1
+
+
+class MIMEVersionHeader:
+
+    max_count = 1
+
+    value_parser = staticmethod(parser.parse_mime_version)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = parse_tree = cls.value_parser(value)
+        kwds['decoded'] = str(parse_tree)
+        kwds['defects'].extend(parse_tree.all_defects)
+        kwds['major'] = None if parse_tree.minor is None else parse_tree.major
+        kwds['minor'] = parse_tree.minor
+        if parse_tree.minor is not None:
+            kwds['version'] = '{}.{}'.format(kwds['major'], kwds['minor'])
+        else:
+            kwds['version'] = None
+
+    def init(self, *args, **kw):
+        self._version = kw.pop('version')
+        self._major = kw.pop('major')
+        self._minor = kw.pop('minor')
+        super().init(*args, **kw)
+
+    @property
+    def major(self):
+        return self._major
+
+    @property
+    def minor(self):
+        return self._minor
+
+    @property
+    def version(self):
+        return self._version
+
+
+class ParameterizedMIMEHeader:
+
+    # Mixin that handles the params dict.  Must be subclassed and
+    # a property value_parser for the specific header provided.
+
+    max_count = 1
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = parse_tree = cls.value_parser(value)
+        kwds['decoded'] = str(parse_tree)
+        kwds['defects'].extend(parse_tree.all_defects)
+        if parse_tree.params is None:
+            kwds['params'] = {}
+        else:
+            # The MIME RFCs specify that parameter ordering is arbitrary.
+            kwds['params'] = {utils._sanitize(name).lower():
+                                    utils._sanitize(value)
+                               for name, value in parse_tree.params}
+
+    def init(self, *args, **kw):
+        self._params = kw.pop('params')
+        super().init(*args, **kw)
+
+    @property
+    def params(self):
+        return MappingProxyType(self._params)
+
+
+class ContentTypeHeader(ParameterizedMIMEHeader):
+
+    value_parser = staticmethod(parser.parse_content_type_header)
+
+    def init(self, *args, **kw):
+        super().init(*args, **kw)
+        self._maintype = utils._sanitize(self._parse_tree.maintype)
+        self._subtype = utils._sanitize(self._parse_tree.subtype)
+
+    @property
+    def maintype(self):
+        return self._maintype
+
+    @property
+    def subtype(self):
+        return self._subtype
+
+    @property
+    def content_type(self):
+        return self.maintype + '/' + self.subtype
+
+
+class ContentDispositionHeader(ParameterizedMIMEHeader):
+
+    value_parser = staticmethod(parser.parse_content_disposition_header)
+
+    def init(self, *args, **kw):
+        super().init(*args, **kw)
+        cd = self._parse_tree.content_disposition
+        self._content_disposition = cd if cd is None else utils._sanitize(cd)
+
+    @property
+    def content_disposition(self):
+        return self._content_disposition
+
+
+class ContentTransferEncodingHeader:
+
+    max_count = 1
+
+    value_parser = staticmethod(parser.parse_content_transfer_encoding_header)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = parse_tree = cls.value_parser(value)
+        kwds['decoded'] = str(parse_tree)
+        kwds['defects'].extend(parse_tree.all_defects)
+
+    def init(self, *args, **kw):
+        super().init(*args, **kw)
+        self._cte = utils._sanitize(self._parse_tree.cte)
+
+    @property
+    def cte(self):
+        return self._cte
+
+
+class MessageIDHeader:
+
+    max_count = 1
+    value_parser = staticmethod(parser.parse_message_id)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = parse_tree = cls.value_parser(value)
+        kwds['decoded'] = str(parse_tree)
+        kwds['defects'].extend(parse_tree.all_defects)
+
+
+class ReferencesHeader:
+
+    max_count = 1
+    value_parser = staticmethod(parser.parse_message_ids)
+
+    @classmethod
+    def parse(cls, value, kwds):
+        kwds['parse_tree'] = parse_tree = cls.value_parser(value)
+        kwds['decoded'] = str(parse_tree)
+        kwds['defects'].extend(parse_tree.all_defects)
+
+
+# The header factory #
+
+_default_header_map = {
+    'subject':                      UniqueUnstructuredHeader,
+    'date':                         UniqueDateHeader,
+    'resent-date':                  DateHeader,
+    'orig-date':                    UniqueDateHeader,
+    'sender':                       UniqueSingleAddressHeader,
+    'resent-sender':                SingleAddressHeader,
+    'to':                           UniqueAddressHeader,
+    'resent-to':                    AddressHeader,
+    'cc':                           UniqueAddressHeader,
+    'resent-cc':                    AddressHeader,
+    'bcc':                          UniqueAddressHeader,
+    'resent-bcc':                   AddressHeader,
+    'from':                         UniqueAddressHeader,
+    'resent-from':                  AddressHeader,
+    'reply-to':                     UniqueAddressHeader,
+    'mime-version':                 MIMEVersionHeader,
+    'content-type':                 ContentTypeHeader,
+    'content-disposition':          ContentDispositionHeader,
+    'content-transfer-encoding':    ContentTransferEncodingHeader,
+    'message-id':                   MessageIDHeader,
+    'in-reply-to':                  ReferencesHeader,
+    'references':                   ReferencesHeader,
+    }
+
+class HeaderRegistry:
+
+    """A header_factory and header registry."""
+
+    def __init__(self, base_class=BaseHeader, default_class=UnstructuredHeader,
+                       use_default_map=True):
+        """Create a header_factory that works with the Policy API.
+
+        base_class is the class that will be the last class in the created
+        header class's __bases__ list.  default_class is the class that will be
+        used if "name" (see __call__) does not appear in the registry.
+        use_default_map controls whether or not the default mapping of names to
+        specialized classes is copied in to the registry when the factory is
+        created.  The default is True.
+
+        """
+        self.registry = {}
+        self.base_class = base_class
+        self.default_class = default_class
+        if use_default_map:
+            self.registry.update(_default_header_map)
+
+    def map_to_type(self, name, cls):
+        """Register cls as the specialized class for handling "name" headers.
+
+        """
+        self.registry[name.lower()] = cls
+
+    def __getitem__(self, name):
+        cls = self.registry.get(name.lower(), self.default_class)
+        return type('_'+cls.__name__, (cls, self.base_class), {})
+
+    def __call__(self, name, value):
+        """Create a header instance for header 'name' from 'value'.
+
+        Creates a header instance by creating a specialized class for parsing
+        and representing the specified header by combining the factory
+        base_class with a specialized class from the registry or the
+        default_class, and passing the name and value to the constructed
+        class's constructor.
+
+        """
+        return self[name](name, value)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/iterators.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/iterators.py
new file mode 100644
index 0000000000000000000000000000000000000000..08ede3ec679613a21f791f0f67a802fb6da5f488
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/iterators.py
@@ -0,0 +1,68 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Various types of useful iterators and generators."""
+
+__all__ = [
+    'body_line_iterator',
+    'typed_subpart_iterator',
+    'walk',
+    # Do not include _structure() since it's part of the debugging API.
+    ]
+
+import sys
+from io import StringIO
+
+
+# This function will become a method of the Message class
+def walk(self):
+    """Walk over the message tree, yielding each subpart.
+
+    The walk is performed in depth-first order.  This method is a
+    generator.
+    """
+    yield self
+    if self.is_multipart():
+        for subpart in self.get_payload():
+            yield from subpart.walk()
+
+
+# These two functions are imported into the Iterators.py interface module.
+def body_line_iterator(msg, decode=False):
+    """Iterate over the parts, returning string payloads line-by-line.
+
+    Optional decode (default False) is passed through to .get_payload().
+    """
+    for subpart in msg.walk():
+        payload = subpart.get_payload(decode=decode)
+        if isinstance(payload, str):
+            yield from StringIO(payload)
+
+
+def typed_subpart_iterator(msg, maintype='text', subtype=None):
+    """Iterate over the subparts with a given MIME type.
+
+    Use 'maintype' as the main MIME type to match against; this defaults to
+    "text".  Optional 'subtype' is the MIME subtype to match against; if
+    omitted, only the main type is matched.
+    """
+    for subpart in msg.walk():
+        if subpart.get_content_maintype() == maintype:
+            if subtype is None or subpart.get_content_subtype() == subtype:
+                yield subpart
+
+
+def _structure(msg, fp=None, level=0, include_default=False):
+    """A handy debugging aid"""
+    if fp is None:
+        fp = sys.stdout
+    tab = ' ' * (level * 4)
+    print(tab + msg.get_content_type(), end='', file=fp)
+    if include_default:
+        print(' [%s]' % msg.get_default_type(), file=fp)
+    else:
+        print(file=fp)
+    if msg.is_multipart():
+        for subpart in msg.get_payload():
+            _structure(subpart, fp, level+1, include_default)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/message.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/message.py
new file mode 100644
index 0000000000000000000000000000000000000000..641fb2e944d43112e8d367258464faf0a4ea0968
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/message.py
@@ -0,0 +1,1217 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Basic message object for the email package object model."""
+
+__all__ = ['Message', 'EmailMessage']
+
+import binascii
+import re
+import quopri
+from io import BytesIO, StringIO
+
+# Intrapackage imports
+from email import utils
+from email import errors
+from email._policybase import compat32
+from email import charset as _charset
+from email._encoded_words import decode_b
+Charset = _charset.Charset
+
+SEMISPACE = '; '
+
+# Regular expression that matches 'special' characters in parameters, the
+# existence of which force quoting of the parameter value.
+tspecials = re.compile(r'[ \(\)<>@,;:\\"/\[\]\?=]')
+
+
+def _splitparam(param):
+    # Split header parameters.  BAW: this may be too simple.  It isn't
+    # strictly RFC 2045 (section 5.1) compliant, but it catches most headers
+    # found in the wild.  We may eventually need a full fledged parser.
+    # RDM: we might have a Header here; for now just stringify it.
+    a, sep, b = str(param).partition(';')
+    if not sep:
+        return a.strip(), None
+    return a.strip(), b.strip()
+
+def _formatparam(param, value=None, quote=True):
+    """Convenience function to format and return a key=value pair.
+
+    This will quote the value if needed or if quote is true.  If value is a
+    three tuple (charset, language, value), it will be encoded according
+    to RFC2231 rules.  If it contains non-ascii characters it will likewise
+    be encoded according to RFC2231 rules, using the utf-8 charset and
+    a null language.
+    """
+    if value is not None and len(value) > 0:
+        # A tuple is used for RFC 2231 encoded parameter values where items
+        # are (charset, language, value).  charset is a string, not a Charset
+        # instance.  RFC 2231 encoded values are never quoted, per RFC.
+        if isinstance(value, tuple):
+            # Encode as per RFC 2231
+            param += '*'
+            value = utils.encode_rfc2231(value[2], value[0], value[1])
+            return '%s=%s' % (param, value)
+        else:
+            try:
+                value.encode('ascii')
+            except UnicodeEncodeError:
+                param += '*'
+                value = utils.encode_rfc2231(value, 'utf-8', '')
+                return '%s=%s' % (param, value)
+        # BAW: Please check this.  I think that if quote is set it should
+        # force quoting even if not necessary.
+        if quote or tspecials.search(value):
+            return '%s="%s"' % (param, utils.quote(value))
+        else:
+            return '%s=%s' % (param, value)
+    else:
+        return param
+
+def _parseparam(s):
+    # RDM This might be a Header, so for now stringify it.
+    s = ';' + str(s)
+    plist = []
+    start = 0
+    while s.find(';', start) == start:
+        start += 1
+        end = s.find(';', start)
+        ind, diff = start, 0
+        while end > 0:
+            diff += s.count('"', ind, end) - s.count('\\"', ind, end)
+            if diff % 2 == 0:
+                break
+            end, ind = ind, s.find(';', end + 1)
+        if end < 0:
+            end = len(s)
+        i = s.find('=', start, end)
+        if i == -1:
+            f = s[start:end]
+        else:
+            f = s[start:i].rstrip().lower() + '=' + s[i+1:end].lstrip()
+        plist.append(f.strip())
+        start = end
+    return plist
+
+
+def _unquotevalue(value):
+    # This is different than utils.collapse_rfc2231_value() because it doesn't
+    # try to convert the value to a unicode.  Message.get_param() and
+    # Message.get_params() are both currently defined to return the tuple in
+    # the face of RFC 2231 parameters.
+    if isinstance(value, tuple):
+        return value[0], value[1], utils.unquote(value[2])
+    else:
+        return utils.unquote(value)
+
+
+def _decode_uu(encoded):
+    """Decode uuencoded data."""
+    decoded_lines = []
+    encoded_lines_iter = iter(encoded.splitlines())
+    for line in encoded_lines_iter:
+        if line.startswith(b"begin "):
+            mode, _, path = line.removeprefix(b"begin ").partition(b" ")
+            try:
+                int(mode, base=8)
+            except ValueError:
+                continue
+            else:
+                break
+    else:
+        raise ValueError("`begin` line not found")
+    for line in encoded_lines_iter:
+        if not line:
+            raise ValueError("Truncated input")
+        elif line.strip(b' \t\r\n\f') == b'end':
+            break
+        try:
+            decoded_line = binascii.a2b_uu(line)
+        except binascii.Error:
+            # Workaround for broken uuencoders by /Fredrik Lundh
+            nbytes = (((line[0]-32) & 63) * 4 + 5) // 3
+            decoded_line = binascii.a2b_uu(line[:nbytes])
+        decoded_lines.append(decoded_line)
+
+    return b''.join(decoded_lines)
+
+
+class Message:
+    """Basic message object.
+
+    A message object is defined as something that has a bunch of RFC 5322
+    headers and a payload.  It may optionally have an envelope header
+    (a.k.a. Unix-From or From_ header).  If the message is a container (i.e. a
+    multipart or a message/rfc822), then the payload is a list of Message
+    objects, otherwise it is a string.
+
+    Message objects implement part of the 'mapping' interface, which assumes
+    there is exactly one occurrence of the header per message.  Some headers
+    do in fact appear multiple times (e.g. Received) and for those headers,
+    you must use the explicit API to set or get all the headers.  Not all of
+    the mapping methods are implemented.
+    """
+    def __init__(self, policy=compat32):
+        self.policy = policy
+        self._headers = []
+        self._unixfrom = None
+        self._payload = None
+        self._charset = None
+        # Defaults for multipart messages
+        self.preamble = self.epilogue = None
+        self.defects = []
+        # Default content type
+        self._default_type = 'text/plain'
+
+    def __str__(self):
+        """Return the entire formatted message as a string.
+        """
+        return self.as_string()
+
+    def as_string(self, unixfrom=False, maxheaderlen=0, policy=None):
+        """Return the entire formatted message as a string.
+
+        Optional 'unixfrom', when true, means include the Unix From_ envelope
+        header.  For backward compatibility reasons, if maxheaderlen is
+        not specified it defaults to 0, so you must override it explicitly
+        if you want a different maxheaderlen.  'policy' is passed to the
+        Generator instance used to serialize the message; if it is not
+        specified the policy associated with the message instance is used.
+
+        If the message object contains binary data that is not encoded
+        according to RFC standards, the non-compliant data will be replaced by
+        unicode "unknown character" code points.
+        """
+        from email.generator import Generator
+        policy = self.policy if policy is None else policy
+        fp = StringIO()
+        g = Generator(fp,
+                      mangle_from_=False,
+                      maxheaderlen=maxheaderlen,
+                      policy=policy)
+        g.flatten(self, unixfrom=unixfrom)
+        return fp.getvalue()
+
+    def __bytes__(self):
+        """Return the entire formatted message as a bytes object.
+        """
+        return self.as_bytes()
+
+    def as_bytes(self, unixfrom=False, policy=None):
+        """Return the entire formatted message as a bytes object.
+
+        Optional 'unixfrom', when true, means include the Unix From_ envelope
+        header.  'policy' is passed to the BytesGenerator instance used to
+        serialize the message; if not specified the policy associated with
+        the message instance is used.
+        """
+        from email.generator import BytesGenerator
+        policy = self.policy if policy is None else policy
+        fp = BytesIO()
+        g = BytesGenerator(fp, mangle_from_=False, policy=policy)
+        g.flatten(self, unixfrom=unixfrom)
+        return fp.getvalue()
+
+    def is_multipart(self):
+        """Return True if the message consists of multiple parts."""
+        return isinstance(self._payload, list)
+
+    #
+    # Unix From_ line
+    #
+    def set_unixfrom(self, unixfrom):
+        self._unixfrom = unixfrom
+
+    def get_unixfrom(self):
+        return self._unixfrom
+
+    #
+    # Payload manipulation.
+    #
+    def attach(self, payload):
+        """Add the given payload to the current payload.
+
+        The current payload will always be a list of objects after this method
+        is called.  If you want to set the payload to a scalar object, use
+        set_payload() instead.
+        """
+        if self._payload is None:
+            self._payload = [payload]
+        else:
+            try:
+                self._payload.append(payload)
+            except AttributeError:
+                raise TypeError("Attach is not valid on a message with a"
+                                " non-multipart payload")
+
+    def get_payload(self, i=None, decode=False):
+        """Return a reference to the payload.
+
+        The payload will either be a list object or a string.  If you mutate
+        the list object, you modify the message's payload in place.  Optional
+        i returns that index into the payload.
+
+        Optional decode is a flag indicating whether the payload should be
+        decoded or not, according to the Content-Transfer-Encoding header
+        (default is False).
+
+        When True and the message is not a multipart, the payload will be
+        decoded if this header's value is `quoted-printable' or `base64'.  If
+        some other encoding is used, or the header is missing, or if the
+        payload has bogus data (i.e. bogus base64 or uuencoded data), the
+        payload is returned as-is.
+
+        If the message is a multipart and the decode flag is True, then None
+        is returned.
+        """
+        # Here is the logic table for this code, based on the email5.0.0 code:
+        #   i     decode  is_multipart  result
+        # ------  ------  ------------  ------------------------------
+        #  None   True    True          None
+        #   i     True    True          None
+        #  None   False   True          _payload (a list)
+        #   i     False   True          _payload element i (a Message)
+        #   i     False   False         error (not a list)
+        #   i     True    False         error (not a list)
+        #  None   False   False         _payload
+        #  None   True    False         _payload decoded (bytes)
+        # Note that Barry planned to factor out the 'decode' case, but that
+        # isn't so easy now that we handle the 8 bit data, which needs to be
+        # converted in both the decode and non-decode path.
+        if self.is_multipart():
+            if decode:
+                return None
+            if i is None:
+                return self._payload
+            else:
+                return self._payload[i]
+        # For backward compatibility, Use isinstance and this error message
+        # instead of the more logical is_multipart test.
+        if i is not None and not isinstance(self._payload, list):
+            raise TypeError('Expected list, got %s' % type(self._payload))
+        payload = self._payload
+        cte = self.get('content-transfer-encoding', '')
+        if hasattr(cte, 'cte'):
+            cte = cte.cte
+        else:
+            # cte might be a Header, so for now stringify it.
+            cte = str(cte).strip().lower()
+        # payload may be bytes here.
+        if not decode:
+            if isinstance(payload, str) and utils._has_surrogates(payload):
+                try:
+                    bpayload = payload.encode('ascii', 'surrogateescape')
+                    try:
+                        payload = bpayload.decode(self.get_content_charset('ascii'), 'replace')
+                    except LookupError:
+                        payload = bpayload.decode('ascii', 'replace')
+                except UnicodeEncodeError:
+                    pass
+            return payload
+        if isinstance(payload, str):
+            try:
+                bpayload = payload.encode('ascii', 'surrogateescape')
+            except UnicodeEncodeError:
+                # This won't happen for RFC compliant messages (messages
+                # containing only ASCII code points in the unicode input).
+                # If it does happen, turn the string into bytes in a way
+                # guaranteed not to fail.
+                bpayload = payload.encode('raw-unicode-escape')
+        else:
+            bpayload = payload
+        if cte == 'quoted-printable':
+            return quopri.decodestring(bpayload)
+        elif cte == 'base64':
+            # XXX: this is a bit of a hack; decode_b should probably be factored
+            # out somewhere, but I haven't figured out where yet.
+            value, defects = decode_b(b''.join(bpayload.splitlines()))
+            for defect in defects:
+                self.policy.handle_defect(self, defect)
+            return value
+        elif cte in ('x-uuencode', 'uuencode', 'uue', 'x-uue'):
+            try:
+                return _decode_uu(bpayload)
+            except ValueError:
+                # Some decoding problem.
+                return bpayload
+        if isinstance(payload, str):
+            return bpayload
+        return payload
+
+    def set_payload(self, payload, charset=None):
+        """Set the payload to the given value.
+
+        Optional charset sets the message's default character set.  See
+        set_charset() for details.
+        """
+        if hasattr(payload, 'encode'):
+            if charset is None:
+                self._payload = payload
+                return
+            if not isinstance(charset, Charset):
+                charset = Charset(charset)
+            payload = payload.encode(charset.output_charset, 'surrogateescape')
+        if hasattr(payload, 'decode'):
+            self._payload = payload.decode('ascii', 'surrogateescape')
+        else:
+            self._payload = payload
+        if charset is not None:
+            self.set_charset(charset)
+
+    def set_charset(self, charset):
+        """Set the charset of the payload to a given character set.
+
+        charset can be a Charset instance, a string naming a character set, or
+        None.  If it is a string it will be converted to a Charset instance.
+        If charset is None, the charset parameter will be removed from the
+        Content-Type field.  Anything else will generate a TypeError.
+
+        The message will be assumed to be of type text/* encoded with
+        charset.input_charset.  It will be converted to charset.output_charset
+        and encoded properly, if needed, when generating the plain text
+        representation of the message.  MIME headers (MIME-Version,
+        Content-Type, Content-Transfer-Encoding) will be added as needed.
+        """
+        if charset is None:
+            self.del_param('charset')
+            self._charset = None
+            return
+        if not isinstance(charset, Charset):
+            charset = Charset(charset)
+        self._charset = charset
+        if 'MIME-Version' not in self:
+            self.add_header('MIME-Version', '1.0')
+        if 'Content-Type' not in self:
+            self.add_header('Content-Type', 'text/plain',
+                            charset=charset.get_output_charset())
+        else:
+            self.set_param('charset', charset.get_output_charset())
+        if charset != charset.get_output_charset():
+            self._payload = charset.body_encode(self._payload)
+        if 'Content-Transfer-Encoding' not in self:
+            cte = charset.get_body_encoding()
+            try:
+                cte(self)
+            except TypeError:
+                # This 'if' is for backward compatibility, it allows unicode
+                # through even though that won't work correctly if the
+                # message is serialized.
+                payload = self._payload
+                if payload:
+                    try:
+                        payload = payload.encode('ascii', 'surrogateescape')
+                    except UnicodeError:
+                        payload = payload.encode(charset.output_charset)
+                self._payload = charset.body_encode(payload)
+                self.add_header('Content-Transfer-Encoding', cte)
+
+    def get_charset(self):
+        """Return the Charset instance associated with the message's payload.
+        """
+        return self._charset
+
+    #
+    # MAPPING INTERFACE (partial)
+    #
+    def __len__(self):
+        """Return the total number of headers, including duplicates."""
+        return len(self._headers)
+
+    def __getitem__(self, name):
+        """Get a header value.
+
+        Return None if the header is missing instead of raising an exception.
+
+        Note that if the header appeared multiple times, exactly which
+        occurrence gets returned is undefined.  Use get_all() to get all
+        the values matching a header field name.
+        """
+        return self.get(name)
+
+    def __setitem__(self, name, val):
+        """Set the value of a header.
+
+        Note: this does not overwrite an existing header with the same field
+        name.  Use __delitem__() first to delete any existing headers.
+        """
+        max_count = self.policy.header_max_count(name)
+        if max_count:
+            lname = name.lower()
+            found = 0
+            for k, v in self._headers:
+                if k.lower() == lname:
+                    found += 1
+                    if found >= max_count:
+                        raise ValueError("There may be at most {} {} headers "
+                                         "in a message".format(max_count, name))
+        self._headers.append(self.policy.header_store_parse(name, val))
+
+    def __delitem__(self, name):
+        """Delete all occurrences of a header, if present.
+
+        Does not raise an exception if the header is missing.
+        """
+        name = name.lower()
+        newheaders = []
+        for k, v in self._headers:
+            if k.lower() != name:
+                newheaders.append((k, v))
+        self._headers = newheaders
+
+    def __contains__(self, name):
+        name_lower = name.lower()
+        for k, v in self._headers:
+            if name_lower == k.lower():
+                return True
+        return False
+
+    def __iter__(self):
+        for field, value in self._headers:
+            yield field
+
+    def keys(self):
+        """Return a list of all the message's header field names.
+
+        These will be sorted in the order they appeared in the original
+        message, or were added to the message, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return [k for k, v in self._headers]
+
+    def values(self):
+        """Return a list of all the message's header values.
+
+        These will be sorted in the order they appeared in the original
+        message, or were added to the message, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return [self.policy.header_fetch_parse(k, v)
+                for k, v in self._headers]
+
+    def items(self):
+        """Get all the message's header fields and values.
+
+        These will be sorted in the order they appeared in the original
+        message, or were added to the message, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return [(k, self.policy.header_fetch_parse(k, v))
+                for k, v in self._headers]
+
+    def get(self, name, failobj=None):
+        """Get a header value.
+
+        Like __getitem__() but return failobj instead of None when the field
+        is missing.
+        """
+        name = name.lower()
+        for k, v in self._headers:
+            if k.lower() == name:
+                return self.policy.header_fetch_parse(k, v)
+        return failobj
+
+    #
+    # "Internal" methods (public API, but only intended for use by a parser
+    # or generator, not normal application code.
+    #
+
+    def set_raw(self, name, value):
+        """Store name and value in the model without modification.
+
+        This is an "internal" API, intended only for use by a parser.
+        """
+        self._headers.append((name, value))
+
+    def raw_items(self):
+        """Return the (name, value) header pairs without modification.
+
+        This is an "internal" API, intended only for use by a generator.
+        """
+        return iter(self._headers.copy())
+
+    #
+    # Additional useful stuff
+    #
+
+    def get_all(self, name, failobj=None):
+        """Return a list of all the values for the named field.
+
+        These will be sorted in the order they appeared in the original
+        message, and may contain duplicates.  Any fields deleted and
+        re-inserted are always appended to the header list.
+
+        If no such fields exist, failobj is returned (defaults to None).
+        """
+        values = []
+        name = name.lower()
+        for k, v in self._headers:
+            if k.lower() == name:
+                values.append(self.policy.header_fetch_parse(k, v))
+        if not values:
+            return failobj
+        return values
+
+    def add_header(self, _name, _value, **_params):
+        """Extended header setting.
+
+        name is the header field to add.  keyword arguments can be used to set
+        additional parameters for the header field, with underscores converted
+        to dashes.  Normally the parameter will be added as key="value" unless
+        value is None, in which case only the key will be added.  If a
+        parameter value contains non-ASCII characters it can be specified as a
+        three-tuple of (charset, language, value), in which case it will be
+        encoded according to RFC2231 rules.  Otherwise it will be encoded using
+        the utf-8 charset and a language of ''.
+
+        Examples:
+
+        msg.add_header('content-disposition', 'attachment', filename='bud.gif')
+        msg.add_header('content-disposition', 'attachment',
+                       filename=('utf-8', '', 'Fußballer.ppt'))
+        msg.add_header('content-disposition', 'attachment',
+                       filename='Fußballer.ppt'))
+        """
+        parts = []
+        for k, v in _params.items():
+            if v is None:
+                parts.append(k.replace('_', '-'))
+            else:
+                parts.append(_formatparam(k.replace('_', '-'), v))
+        if _value is not None:
+            parts.insert(0, _value)
+        self[_name] = SEMISPACE.join(parts)
+
+    def replace_header(self, _name, _value):
+        """Replace a header.
+
+        Replace the first matching header found in the message, retaining
+        header order and case.  If no matching header was found, a KeyError is
+        raised.
+        """
+        _name = _name.lower()
+        for i, (k, v) in zip(range(len(self._headers)), self._headers):
+            if k.lower() == _name:
+                self._headers[i] = self.policy.header_store_parse(k, _value)
+                break
+        else:
+            raise KeyError(_name)
+
+    #
+    # Use these three methods instead of the three above.
+    #
+
+    def get_content_type(self):
+        """Return the message's content type.
+
+        The returned string is coerced to lower case of the form
+        'maintype/subtype'.  If there was no Content-Type header in the
+        message, the default type as given by get_default_type() will be
+        returned.  Since according to RFC 2045, messages always have a default
+        type this will always return a value.
+
+        RFC 2045 defines a message's default type to be text/plain unless it
+        appears inside a multipart/digest container, in which case it would be
+        message/rfc822.
+        """
+        missing = object()
+        value = self.get('content-type', missing)
+        if value is missing:
+            # This should have no parameters
+            return self.get_default_type()
+        ctype = _splitparam(value)[0].lower()
+        # RFC 2045, section 5.2 says if its invalid, use text/plain
+        if ctype.count('/') != 1:
+            return 'text/plain'
+        return ctype
+
+    def get_content_maintype(self):
+        """Return the message's main content type.
+
+        This is the 'maintype' part of the string returned by
+        get_content_type().
+        """
+        ctype = self.get_content_type()
+        return ctype.split('/')[0]
+
+    def get_content_subtype(self):
+        """Returns the message's sub-content type.
+
+        This is the 'subtype' part of the string returned by
+        get_content_type().
+        """
+        ctype = self.get_content_type()
+        return ctype.split('/')[1]
+
+    def get_default_type(self):
+        """Return the 'default' content type.
+
+        Most messages have a default content type of text/plain, except for
+        messages that are subparts of multipart/digest containers.  Such
+        subparts have a default content type of message/rfc822.
+        """
+        return self._default_type
+
+    def set_default_type(self, ctype):
+        """Set the 'default' content type.
+
+        ctype should be either "text/plain" or "message/rfc822", although this
+        is not enforced.  The default content type is not stored in the
+        Content-Type header.
+        """
+        self._default_type = ctype
+
+    def _get_params_preserve(self, failobj, header):
+        # Like get_params() but preserves the quoting of values.  BAW:
+        # should this be part of the public interface?
+        missing = object()
+        value = self.get(header, missing)
+        if value is missing:
+            return failobj
+        params = []
+        for p in _parseparam(value):
+            try:
+                name, val = p.split('=', 1)
+                name = name.strip()
+                val = val.strip()
+            except ValueError:
+                # Must have been a bare attribute
+                name = p.strip()
+                val = ''
+            params.append((name, val))
+        params = utils.decode_params(params)
+        return params
+
+    def get_params(self, failobj=None, header='content-type', unquote=True):
+        """Return the message's Content-Type parameters, as a list.
+
+        The elements of the returned list are 2-tuples of key/value pairs, as
+        split on the '=' sign.  The left hand side of the '=' is the key,
+        while the right hand side is the value.  If there is no '=' sign in
+        the parameter the value is the empty string.  The value is as
+        described in the get_param() method.
+
+        Optional failobj is the object to return if there is no Content-Type
+        header.  Optional header is the header to search instead of
+        Content-Type.  If unquote is True, the value is unquoted.
+        """
+        missing = object()
+        params = self._get_params_preserve(missing, header)
+        if params is missing:
+            return failobj
+        if unquote:
+            return [(k, _unquotevalue(v)) for k, v in params]
+        else:
+            return params
+
+    def get_param(self, param, failobj=None, header='content-type',
+                  unquote=True):
+        """Return the parameter value if found in the Content-Type header.
+
+        Optional failobj is the object to return if there is no Content-Type
+        header, or the Content-Type header has no such parameter.  Optional
+        header is the header to search instead of Content-Type.
+
+        Parameter keys are always compared case insensitively.  The return
+        value can either be a string, or a 3-tuple if the parameter was RFC
+        2231 encoded.  When it's a 3-tuple, the elements of the value are of
+        the form (CHARSET, LANGUAGE, VALUE).  Note that both CHARSET and
+        LANGUAGE can be None, in which case you should consider VALUE to be
+        encoded in the us-ascii charset.  You can usually ignore LANGUAGE.
+        The parameter value (either the returned string, or the VALUE item in
+        the 3-tuple) is always unquoted, unless unquote is set to False.
+
+        If your application doesn't care whether the parameter was RFC 2231
+        encoded, it can turn the return value into a string as follows:
+
+            rawparam = msg.get_param('foo')
+            param = email.utils.collapse_rfc2231_value(rawparam)
+
+        """
+        if header not in self:
+            return failobj
+        for k, v in self._get_params_preserve(failobj, header):
+            if k.lower() == param.lower():
+                if unquote:
+                    return _unquotevalue(v)
+                else:
+                    return v
+        return failobj
+
+    def set_param(self, param, value, header='Content-Type', requote=True,
+                  charset=None, language='', replace=False):
+        """Set a parameter in the Content-Type header.
+
+        If the parameter already exists in the header, its value will be
+        replaced with the new value.
+
+        If header is Content-Type and has not yet been defined for this
+        message, it will be set to "text/plain" and the new parameter and
+        value will be appended as per RFC 2045.
+
+        An alternate header can be specified in the header argument, and all
+        parameters will be quoted as necessary unless requote is False.
+
+        If charset is specified, the parameter will be encoded according to RFC
+        2231.  Optional language specifies the RFC 2231 language, defaulting
+        to the empty string.  Both charset and language should be strings.
+        """
+        if not isinstance(value, tuple) and charset:
+            value = (charset, language, value)
+
+        if header not in self and header.lower() == 'content-type':
+            ctype = 'text/plain'
+        else:
+            ctype = self.get(header)
+        if not self.get_param(param, header=header):
+            if not ctype:
+                ctype = _formatparam(param, value, requote)
+            else:
+                ctype = SEMISPACE.join(
+                    [ctype, _formatparam(param, value, requote)])
+        else:
+            ctype = ''
+            for old_param, old_value in self.get_params(header=header,
+                                                        unquote=requote):
+                append_param = ''
+                if old_param.lower() == param.lower():
+                    append_param = _formatparam(param, value, requote)
+                else:
+                    append_param = _formatparam(old_param, old_value, requote)
+                if not ctype:
+                    ctype = append_param
+                else:
+                    ctype = SEMISPACE.join([ctype, append_param])
+        if ctype != self.get(header):
+            if replace:
+                self.replace_header(header, ctype)
+            else:
+                del self[header]
+                self[header] = ctype
+
+    def del_param(self, param, header='content-type', requote=True):
+        """Remove the given parameter completely from the Content-Type header.
+
+        The header will be re-written in place without the parameter or its
+        value. All values will be quoted as necessary unless requote is
+        False.  Optional header specifies an alternative to the Content-Type
+        header.
+        """
+        if header not in self:
+            return
+        new_ctype = ''
+        for p, v in self.get_params(header=header, unquote=requote):
+            if p.lower() != param.lower():
+                if not new_ctype:
+                    new_ctype = _formatparam(p, v, requote)
+                else:
+                    new_ctype = SEMISPACE.join([new_ctype,
+                                                _formatparam(p, v, requote)])
+        if new_ctype != self.get(header):
+            del self[header]
+            self[header] = new_ctype
+
+    def set_type(self, type, header='Content-Type', requote=True):
+        """Set the main type and subtype for the Content-Type header.
+
+        type must be a string in the form "maintype/subtype", otherwise a
+        ValueError is raised.
+
+        This method replaces the Content-Type header, keeping all the
+        parameters in place.  If requote is False, this leaves the existing
+        header's quoting as is.  Otherwise, the parameters will be quoted (the
+        default).
+
+        An alternative header can be specified in the header argument.  When
+        the Content-Type header is set, we'll always also add a MIME-Version
+        header.
+        """
+        # BAW: should we be strict?
+        if not type.count('/') == 1:
+            raise ValueError
+        # Set the Content-Type, you get a MIME-Version
+        if header.lower() == 'content-type':
+            del self['mime-version']
+            self['MIME-Version'] = '1.0'
+        if header not in self:
+            self[header] = type
+            return
+        params = self.get_params(header=header, unquote=requote)
+        del self[header]
+        self[header] = type
+        # Skip the first param; it's the old type.
+        for p, v in params[1:]:
+            self.set_param(p, v, header, requote)
+
+    def get_filename(self, failobj=None):
+        """Return the filename associated with the payload if present.
+
+        The filename is extracted from the Content-Disposition header's
+        'filename' parameter, and it is unquoted.  If that header is missing
+        the 'filename' parameter, this method falls back to looking for the
+        'name' parameter.
+        """
+        missing = object()
+        filename = self.get_param('filename', missing, 'content-disposition')
+        if filename is missing:
+            filename = self.get_param('name', missing, 'content-type')
+        if filename is missing:
+            return failobj
+        return utils.collapse_rfc2231_value(filename).strip()
+
+    def get_boundary(self, failobj=None):
+        """Return the boundary associated with the payload if present.
+
+        The boundary is extracted from the Content-Type header's 'boundary'
+        parameter, and it is unquoted.
+        """
+        missing = object()
+        boundary = self.get_param('boundary', missing)
+        if boundary is missing:
+            return failobj
+        # RFC 2046 says that boundaries may begin but not end in w/s
+        return utils.collapse_rfc2231_value(boundary).rstrip()
+
+    def set_boundary(self, boundary):
+        """Set the boundary parameter in Content-Type to 'boundary'.
+
+        This is subtly different than deleting the Content-Type header and
+        adding a new one with a new boundary parameter via add_header().  The
+        main difference is that using the set_boundary() method preserves the
+        order of the Content-Type header in the original message.
+
+        HeaderParseError is raised if the message has no Content-Type header.
+        """
+        missing = object()
+        params = self._get_params_preserve(missing, 'content-type')
+        if params is missing:
+            # There was no Content-Type header, and we don't know what type
+            # to set it to, so raise an exception.
+            raise errors.HeaderParseError('No Content-Type header found')
+        newparams = []
+        foundp = False
+        for pk, pv in params:
+            if pk.lower() == 'boundary':
+                newparams.append(('boundary', '"%s"' % boundary))
+                foundp = True
+            else:
+                newparams.append((pk, pv))
+        if not foundp:
+            # The original Content-Type header had no boundary attribute.
+            # Tack one on the end.  BAW: should we raise an exception
+            # instead???
+            newparams.append(('boundary', '"%s"' % boundary))
+        # Replace the existing Content-Type header with the new value
+        newheaders = []
+        for h, v in self._headers:
+            if h.lower() == 'content-type':
+                parts = []
+                for k, v in newparams:
+                    if v == '':
+                        parts.append(k)
+                    else:
+                        parts.append('%s=%s' % (k, v))
+                val = SEMISPACE.join(parts)
+                newheaders.append(self.policy.header_store_parse(h, val))
+
+            else:
+                newheaders.append((h, v))
+        self._headers = newheaders
+
+    def get_content_charset(self, failobj=None):
+        """Return the charset parameter of the Content-Type header.
+
+        The returned string is always coerced to lower case.  If there is no
+        Content-Type header, or if that header has no charset parameter,
+        failobj is returned.
+        """
+        missing = object()
+        charset = self.get_param('charset', missing)
+        if charset is missing:
+            return failobj
+        if isinstance(charset, tuple):
+            # RFC 2231 encoded, so decode it, and it better end up as ascii.
+            pcharset = charset[0] or 'us-ascii'
+            try:
+                # LookupError will be raised if the charset isn't known to
+                # Python.  UnicodeError will be raised if the encoded text
+                # contains a character not in the charset.
+                as_bytes = charset[2].encode('raw-unicode-escape')
+                charset = str(as_bytes, pcharset)
+            except (LookupError, UnicodeError):
+                charset = charset[2]
+        # charset characters must be in us-ascii range
+        try:
+            charset.encode('us-ascii')
+        except UnicodeError:
+            return failobj
+        # RFC 2046, $4.1.2 says charsets are not case sensitive
+        return charset.lower()
+
+    def get_charsets(self, failobj=None):
+        """Return a list containing the charset(s) used in this message.
+
+        The returned list of items describes the Content-Type headers'
+        charset parameter for this message and all the subparts in its
+        payload.
+
+        Each item will either be a string (the value of the charset parameter
+        in the Content-Type header of that part) or the value of the
+        'failobj' parameter (defaults to None), if the part does not have a
+        main MIME type of "text", or the charset is not defined.
+
+        The list will contain one string for each part of the message, plus
+        one for the container message (i.e. self), so that a non-multipart
+        message will still return a list of length 1.
+        """
+        return [part.get_content_charset(failobj) for part in self.walk()]
+
+    def get_content_disposition(self):
+        """Return the message's content-disposition if it exists, or None.
+
+        The return values can be either 'inline', 'attachment' or None
+        according to the rfc2183.
+        """
+        value = self.get('content-disposition')
+        if value is None:
+            return None
+        c_d = _splitparam(value)[0].lower()
+        return c_d
+
+    # I.e. def walk(self): ...
+    from email.iterators import walk
+
+
+class MIMEPart(Message):
+
+    def __init__(self, policy=None):
+        if policy is None:
+            from email.policy import default
+            policy = default
+        super().__init__(policy)
+
+
+    def as_string(self, unixfrom=False, maxheaderlen=None, policy=None):
+        """Return the entire formatted message as a string.
+
+        Optional 'unixfrom', when true, means include the Unix From_ envelope
+        header.  maxheaderlen is retained for backward compatibility with the
+        base Message class, but defaults to None, meaning that the policy value
+        for max_line_length controls the header maximum length.  'policy' is
+        passed to the Generator instance used to serialize the message; if it
+        is not specified the policy associated with the message instance is
+        used.
+        """
+        policy = self.policy if policy is None else policy
+        if maxheaderlen is None:
+            maxheaderlen = policy.max_line_length
+        return super().as_string(unixfrom, maxheaderlen, policy)
+
+    def __str__(self):
+        return self.as_string(policy=self.policy.clone(utf8=True))
+
+    def is_attachment(self):
+        c_d = self.get('content-disposition')
+        return False if c_d is None else c_d.content_disposition == 'attachment'
+
+    def _find_body(self, part, preferencelist):
+        if part.is_attachment():
+            return
+        maintype, subtype = part.get_content_type().split('/')
+        if maintype == 'text':
+            if subtype in preferencelist:
+                yield (preferencelist.index(subtype), part)
+            return
+        if maintype != 'multipart' or not self.is_multipart():
+            return
+        if subtype != 'related':
+            for subpart in part.iter_parts():
+                yield from self._find_body(subpart, preferencelist)
+            return
+        if 'related' in preferencelist:
+            yield (preferencelist.index('related'), part)
+        candidate = None
+        start = part.get_param('start')
+        if start:
+            for subpart in part.iter_parts():
+                if subpart['content-id'] == start:
+                    candidate = subpart
+                    break
+        if candidate is None:
+            subparts = part.get_payload()
+            candidate = subparts[0] if subparts else None
+        if candidate is not None:
+            yield from self._find_body(candidate, preferencelist)
+
+    def get_body(self, preferencelist=('related', 'html', 'plain')):
+        """Return best candidate mime part for display as 'body' of message.
+
+        Do a depth first search, starting with self, looking for the first part
+        matching each of the items in preferencelist, and return the part
+        corresponding to the first item that has a match, or None if no items
+        have a match.  If 'related' is not included in preferencelist, consider
+        the root part of any multipart/related encountered as a candidate
+        match.  Ignore parts with 'Content-Disposition: attachment'.
+        """
+        best_prio = len(preferencelist)
+        body = None
+        for prio, part in self._find_body(self, preferencelist):
+            if prio < best_prio:
+                best_prio = prio
+                body = part
+                if prio == 0:
+                    break
+        return body
+
+    _body_types = {('text', 'plain'),
+                   ('text', 'html'),
+                   ('multipart', 'related'),
+                   ('multipart', 'alternative')}
+    def iter_attachments(self):
+        """Return an iterator over the non-main parts of a multipart.
+
+        Skip the first of each occurrence of text/plain, text/html,
+        multipart/related, or multipart/alternative in the multipart (unless
+        they have a 'Content-Disposition: attachment' header) and include all
+        remaining subparts in the returned iterator.  When applied to a
+        multipart/related, return all parts except the root part.  Return an
+        empty iterator when applied to a multipart/alternative or a
+        non-multipart.
+        """
+        maintype, subtype = self.get_content_type().split('/')
+        if maintype != 'multipart' or subtype == 'alternative':
+            return
+        payload = self.get_payload()
+        # Certain malformed messages can have content type set to `multipart/*`
+        # but still have single part body, in which case payload.copy() can
+        # fail with AttributeError.
+        try:
+            parts = payload.copy()
+        except AttributeError:
+            # payload is not a list, it is most probably a string.
+            return
+
+        if maintype == 'multipart' and subtype == 'related':
+            # For related, we treat everything but the root as an attachment.
+            # The root may be indicated by 'start'; if there's no start or we
+            # can't find the named start, treat the first subpart as the root.
+            start = self.get_param('start')
+            if start:
+                found = False
+                attachments = []
+                for part in parts:
+                    if part.get('content-id') == start:
+                        found = True
+                    else:
+                        attachments.append(part)
+                if found:
+                    yield from attachments
+                    return
+            parts.pop(0)
+            yield from parts
+            return
+        # Otherwise we more or less invert the remaining logic in get_body.
+        # This only really works in edge cases (ex: non-text related or
+        # alternatives) if the sending agent sets content-disposition.
+        seen = []   # Only skip the first example of each candidate type.
+        for part in parts:
+            maintype, subtype = part.get_content_type().split('/')
+            if ((maintype, subtype) in self._body_types and
+                    not part.is_attachment() and subtype not in seen):
+                seen.append(subtype)
+                continue
+            yield part
+
+    def iter_parts(self):
+        """Return an iterator over all immediate subparts of a multipart.
+
+        Return an empty iterator for a non-multipart.
+        """
+        if self.is_multipart():
+            yield from self.get_payload()
+
+    def get_content(self, *args, content_manager=None, **kw):
+        if content_manager is None:
+            content_manager = self.policy.content_manager
+        return content_manager.get_content(self, *args, **kw)
+
+    def set_content(self, *args, content_manager=None, **kw):
+        if content_manager is None:
+            content_manager = self.policy.content_manager
+        content_manager.set_content(self, *args, **kw)
+
+    def _make_multipart(self, subtype, disallowed_subtypes, boundary):
+        if self.get_content_maintype() == 'multipart':
+            existing_subtype = self.get_content_subtype()
+            disallowed_subtypes = disallowed_subtypes + (subtype,)
+            if existing_subtype in disallowed_subtypes:
+                raise ValueError("Cannot convert {} to {}".format(
+                    existing_subtype, subtype))
+        keep_headers = []
+        part_headers = []
+        for name, value in self._headers:
+            if name.lower().startswith('content-'):
+                part_headers.append((name, value))
+            else:
+                keep_headers.append((name, value))
+        if part_headers:
+            # There is existing content, move it to the first subpart.
+            part = type(self)(policy=self.policy)
+            part._headers = part_headers
+            part._payload = self._payload
+            self._payload = [part]
+        else:
+            self._payload = []
+        self._headers = keep_headers
+        self['Content-Type'] = 'multipart/' + subtype
+        if boundary is not None:
+            self.set_param('boundary', boundary)
+
+    def make_related(self, boundary=None):
+        self._make_multipart('related', ('alternative', 'mixed'), boundary)
+
+    def make_alternative(self, boundary=None):
+        self._make_multipart('alternative', ('mixed',), boundary)
+
+    def make_mixed(self, boundary=None):
+        self._make_multipart('mixed', (), boundary)
+
+    def _add_multipart(self, _subtype, *args, _disp=None, **kw):
+        if (self.get_content_maintype() != 'multipart' or
+                self.get_content_subtype() != _subtype):
+            getattr(self, 'make_' + _subtype)()
+        part = type(self)(policy=self.policy)
+        part.set_content(*args, **kw)
+        if _disp and 'content-disposition' not in part:
+            part['Content-Disposition'] = _disp
+        self.attach(part)
+
+    def add_related(self, *args, **kw):
+        self._add_multipart('related', *args, _disp='inline', **kw)
+
+    def add_alternative(self, *args, **kw):
+        self._add_multipart('alternative', *args, **kw)
+
+    def add_attachment(self, *args, **kw):
+        self._add_multipart('mixed', *args, _disp='attachment', **kw)
+
+    def clear(self):
+        self._headers = []
+        self._payload = None
+
+    def clear_content(self):
+        self._headers = [(n, v) for n, v in self._headers
+                         if not n.lower().startswith('content-')]
+        self._payload = None
+
+
+class EmailMessage(MIMEPart):
+
+    def set_content(self, *args, **kw):
+        super().set_content(*args, **kw)
+        if 'MIME-Version' not in self:
+            self['MIME-Version'] = '1.0'
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/parser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..c6a51dd8e377b819bd3b8acee23c2bf78d407df8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/parser.py
@@ -0,0 +1,127 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw, Thomas Wouters, Anthony Baxter
+# Contact: email-sig@python.org
+
+"""A parser of RFC 5322 and MIME email messages."""
+
+__all__ = ['Parser', 'HeaderParser', 'BytesParser', 'BytesHeaderParser',
+           'FeedParser', 'BytesFeedParser']
+
+from io import StringIO, TextIOWrapper
+
+from email.feedparser import FeedParser, BytesFeedParser
+from email._policybase import compat32
+
+
+class Parser:
+    def __init__(self, _class=None, *, policy=compat32):
+        """Parser of RFC 5322 and MIME email messages.
+
+        Creates an in-memory object tree representing the email message, which
+        can then be manipulated and turned over to a Generator to return the
+        textual representation of the message.
+
+        The string must be formatted as a block of RFC 5322 headers and header
+        continuation lines, optionally preceded by a 'Unix-from' header.  The
+        header block is terminated either by the end of the string or by a
+        blank line.
+
+        _class is the class to instantiate for new message objects when they
+        must be created.  This class must have a constructor that can take
+        zero arguments.  Default is Message.Message.
+
+        The policy keyword specifies a policy object that controls a number of
+        aspects of the parser's operation.  The default policy maintains
+        backward compatibility.
+
+        """
+        self._class = _class
+        self.policy = policy
+
+    def parse(self, fp, headersonly=False):
+        """Create a message structure from the data in a file.
+
+        Reads all the data from the file and returns the root of the message
+        structure.  Optional headersonly is a flag specifying whether to stop
+        parsing after reading the headers or not.  The default is False,
+        meaning it parses the entire contents of the file.
+        """
+        feedparser = FeedParser(self._class, policy=self.policy)
+        if headersonly:
+            feedparser._set_headersonly()
+        while data := fp.read(8192):
+            feedparser.feed(data)
+        return feedparser.close()
+
+    def parsestr(self, text, headersonly=False):
+        """Create a message structure from a string.
+
+        Returns the root of the message structure.  Optional headersonly is a
+        flag specifying whether to stop parsing after reading the headers or
+        not.  The default is False, meaning it parses the entire contents of
+        the file.
+        """
+        return self.parse(StringIO(text), headersonly=headersonly)
+
+
+class HeaderParser(Parser):
+    def parse(self, fp, headersonly=True):
+        return Parser.parse(self, fp, True)
+
+    def parsestr(self, text, headersonly=True):
+        return Parser.parsestr(self, text, True)
+
+
+class BytesParser:
+
+    def __init__(self, *args, **kw):
+        """Parser of binary RFC 5322 and MIME email messages.
+
+        Creates an in-memory object tree representing the email message, which
+        can then be manipulated and turned over to a Generator to return the
+        textual representation of the message.
+
+        The input must be formatted as a block of RFC 5322 headers and header
+        continuation lines, optionally preceded by a 'Unix-from' header.  The
+        header block is terminated either by the end of the input or by a
+        blank line.
+
+        _class is the class to instantiate for new message objects when they
+        must be created.  This class must have a constructor that can take
+        zero arguments.  Default is Message.Message.
+        """
+        self.parser = Parser(*args, **kw)
+
+    def parse(self, fp, headersonly=False):
+        """Create a message structure from the data in a binary file.
+
+        Reads all the data from the file and returns the root of the message
+        structure.  Optional headersonly is a flag specifying whether to stop
+        parsing after reading the headers or not.  The default is False,
+        meaning it parses the entire contents of the file.
+        """
+        fp = TextIOWrapper(fp, encoding='ascii', errors='surrogateescape')
+        try:
+            return self.parser.parse(fp, headersonly)
+        finally:
+            fp.detach()
+
+
+    def parsebytes(self, text, headersonly=False):
+        """Create a message structure from a byte string.
+
+        Returns the root of the message structure.  Optional headersonly is a
+        flag specifying whether to stop parsing after reading the headers or
+        not.  The default is False, meaning it parses the entire contents of
+        the file.
+        """
+        text = text.decode('ASCII', errors='surrogateescape')
+        return self.parser.parsestr(text, headersonly)
+
+
+class BytesHeaderParser(BytesParser):
+    def parse(self, fp, headersonly=True):
+        return BytesParser.parse(self, fp, headersonly=True)
+
+    def parsebytes(self, text, headersonly=True):
+        return BytesParser.parsebytes(self, text, headersonly=True)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/policy.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/policy.py
new file mode 100644
index 0000000000000000000000000000000000000000..4169150101a29d615a9f43c9f892848edb37ab9e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/policy.py
@@ -0,0 +1,239 @@
+"""This will be the home for the policy that hooks in the new
+code that adds all the email6 features.
+"""
+
+import re
+import sys
+from email._policybase import (
+    Compat32,
+    Policy,
+    _extend_docstrings,
+    compat32,
+    validate_header_name
+)
+from email.utils import _has_surrogates
+from email.headerregistry import HeaderRegistry as HeaderRegistry
+from email.contentmanager import raw_data_manager
+from email.message import EmailMessage
+
+__all__ = [
+    'Compat32',
+    'compat32',
+    'Policy',
+    'EmailPolicy',
+    'default',
+    'strict',
+    'SMTP',
+    'HTTP',
+    ]
+
+linesep_splitter = re.compile(r'\n|\r\n?')
+
+@_extend_docstrings
+class EmailPolicy(Policy):
+
+    """+
+    PROVISIONAL
+
+    The API extensions enabled by this policy are currently provisional.
+    Refer to the documentation for details.
+
+    This policy adds new header parsing and folding algorithms.  Instead of
+    simple strings, headers are custom objects with custom attributes
+    depending on the type of the field.  The folding algorithm fully
+    implements RFCs 2047 and 5322.
+
+    In addition to the settable attributes listed above that apply to
+    all Policies, this policy adds the following additional attributes:
+
+    utf8                -- if False (the default) message headers will be
+                           serialized as ASCII, using encoded words to encode
+                           any non-ASCII characters in the source strings.  If
+                           True, the message headers will be serialized using
+                           utf8 and will not contain encoded words (see RFC
+                           6532 for more on this serialization format).
+
+    refold_source       -- if the value for a header in the Message object
+                           came from the parsing of some source, this attribute
+                           indicates whether or not a generator should refold
+                           that value when transforming the message back into
+                           stream form.  The possible values are:
+
+                           none  -- all source values use original folding
+                           long  -- source values that have any line that is
+                                    longer than max_line_length will be
+                                    refolded
+                           all  -- all values are refolded.
+
+                           The default is 'long'.
+
+    header_factory      -- a callable that takes two arguments, 'name' and
+                           'value', where 'name' is a header field name and
+                           'value' is an unfolded header field value, and
+                           returns a string-like object that represents that
+                           header.  A default header_factory is provided that
+                           understands some of the RFC5322 header field types.
+                           (Currently address fields and date fields have
+                           special treatment, while all other fields are
+                           treated as unstructured.  This list will be
+                           completed before the extension is marked stable.)
+
+    content_manager     -- an object with at least two methods: get_content
+                           and set_content.  When the get_content or
+                           set_content method of a Message object is called,
+                           it calls the corresponding method of this object,
+                           passing it the message object as its first argument,
+                           and any arguments or keywords that were passed to
+                           it as additional arguments.  The default
+                           content_manager is
+                           :data:`~email.contentmanager.raw_data_manager`.
+
+    """
+
+    message_factory = EmailMessage
+    utf8 = False
+    refold_source = 'long'
+    header_factory = HeaderRegistry()
+    content_manager = raw_data_manager
+
+    def __init__(self, **kw):
+        # Ensure that each new instance gets a unique header factory
+        # (as opposed to clones, which share the factory).
+        if 'header_factory' not in kw:
+            object.__setattr__(self, 'header_factory', HeaderRegistry())
+        super().__init__(**kw)
+
+    def header_max_count(self, name):
+        """+
+        The implementation for this class returns the max_count attribute from
+        the specialized header class that would be used to construct a header
+        of type 'name'.
+        """
+        return self.header_factory[name].max_count
+
+    # The logic of the next three methods is chosen such that it is possible to
+    # switch a Message object between a Compat32 policy and a policy derived
+    # from this class and have the results stay consistent.  This allows a
+    # Message object constructed with this policy to be passed to a library
+    # that only handles Compat32 objects, or to receive such an object and
+    # convert it to use the newer style by just changing its policy.  It is
+    # also chosen because it postpones the relatively expensive full rfc5322
+    # parse until as late as possible when parsing from source, since in many
+    # applications only a few headers will actually be inspected.
+
+    def header_source_parse(self, sourcelines):
+        """+
+        The name is parsed as everything up to the ':' and returned unmodified.
+        The value is determined by stripping leading whitespace off the
+        remainder of the first line joined with all subsequent lines, and
+        stripping any trailing carriage return or linefeed characters.  (This
+        is the same as Compat32).
+
+        """
+        name, value = sourcelines[0].split(':', 1)
+        value = ''.join((value, *sourcelines[1:])).lstrip(' \t\r\n')
+        return (name, value.rstrip('\r\n'))
+
+    def header_store_parse(self, name, value):
+        """+
+        The name is returned unchanged.  If the input value has a 'name'
+        attribute and it matches the name ignoring case, the value is returned
+        unchanged.  Otherwise the name and value are passed to header_factory
+        method, and the resulting custom header object is returned as the
+        value.  In this case a ValueError is raised if the input value contains
+        CR or LF characters.
+
+        """
+        validate_header_name(name)
+        if hasattr(value, 'name') and value.name.lower() == name.lower():
+            return (name, value)
+        if isinstance(value, str) and len(value.splitlines())>1:
+            # XXX this error message isn't quite right when we use splitlines
+            # (see issue 22233), but I'm not sure what should happen here.
+            raise ValueError("Header values may not contain linefeed "
+                             "or carriage return characters")
+        return (name, self.header_factory(name, value))
+
+    def header_fetch_parse(self, name, value):
+        """+
+        If the value has a 'name' attribute, it is returned to unmodified.
+        Otherwise the name and the value with any linesep characters removed
+        are passed to the header_factory method, and the resulting custom
+        header object is returned.  Any surrogateescaped bytes get turned
+        into the unicode unknown-character glyph.
+
+        """
+        if hasattr(value, 'name'):
+            return value
+        # We can't use splitlines here because it splits on more than \r and \n.
+        value = ''.join(linesep_splitter.split(value))
+        return self.header_factory(name, value)
+
+    def fold(self, name, value):
+        """+
+        Header folding is controlled by the refold_source policy setting.  A
+        value is considered to be a 'source value' if and only if it does not
+        have a 'name' attribute (having a 'name' attribute means it is a header
+        object of some sort).  If a source value needs to be refolded according
+        to the policy, it is converted into a custom header object by passing
+        the name and the value with any linesep characters removed to the
+        header_factory method.  Folding of a custom header object is done by
+        calling its fold method with the current policy.
+
+        Source values are split into lines using splitlines.  If the value is
+        not to be refolded, the lines are rejoined using the linesep from the
+        policy and returned.  The exception is lines containing non-ascii
+        binary data.  In that case the value is refolded regardless of the
+        refold_source setting, which causes the binary data to be CTE encoded
+        using the unknown-8bit charset.
+
+        """
+        return self._fold(name, value, refold_binary=True)
+
+    def fold_binary(self, name, value):
+        """+
+        The same as fold if cte_type is 7bit, except that the returned value is
+        bytes.
+
+        If cte_type is 8bit, non-ASCII binary data is converted back into
+        bytes.  Headers with binary data are not refolded, regardless of the
+        refold_header setting, since there is no way to know whether the binary
+        data consists of single byte characters or multibyte characters.
+
+        If utf8 is true, headers are encoded to utf8, otherwise to ascii with
+        non-ASCII unicode rendered as encoded words.
+
+        """
+        folded = self._fold(name, value, refold_binary=self.cte_type=='7bit')
+        charset = 'utf8' if self.utf8 else 'ascii'
+        return folded.encode(charset, 'surrogateescape')
+
+    def _fold(self, name, value, refold_binary=False):
+        if hasattr(value, 'name'):
+            return value.fold(policy=self)
+        maxlen = self.max_line_length if self.max_line_length else sys.maxsize
+        # We can't use splitlines here because it splits on more than \r and \n.
+        lines = linesep_splitter.split(value)
+        refold = (self.refold_source == 'all' or
+                  self.refold_source == 'long' and
+                    (lines and len(lines[0])+len(name)+2 > maxlen or
+                     any(len(x) > maxlen for x in lines[1:])))
+
+        if not refold:
+            if not self.utf8:
+                refold = not value.isascii()
+            elif refold_binary:
+                refold = _has_surrogates(value)
+        if refold:
+            return self.header_factory(name, ''.join(lines)).fold(policy=self)
+
+        return name + ': ' + self.linesep.join(lines) + self.linesep
+
+
+default = EmailPolicy()
+# Make the default policy use the class default header_factory
+del default.header_factory
+strict = default.clone(raise_on_defect=True)
+SMTP = default.clone(linesep='\r\n')
+HTTP = default.clone(linesep='\r\n', max_line_length=None)
+SMTPUTF8 = SMTP.clone(utf8=True)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/quoprimime.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/quoprimime.py
new file mode 100644
index 0000000000000000000000000000000000000000..27c7ea55c7871fd6e8ca43b723598579d207da07
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/quoprimime.py
@@ -0,0 +1,300 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Ben Gertzfield
+# Contact: email-sig@python.org
+
+"""Quoted-printable content transfer encoding per RFCs 2045-2047.
+
+This module handles the content transfer encoding method defined in RFC 2045
+to encode US ASCII-like 8-bit data called 'quoted-printable'.  It is used to
+safely encode text that is in a character set similar to the 7-bit US ASCII
+character set, but that includes some 8-bit characters that are normally not
+allowed in email bodies or headers.
+
+Quoted-printable is very space-inefficient for encoding binary files; use the
+email.base64mime module for that instead.
+
+This module provides an interface to encode and decode both headers and bodies
+with quoted-printable encoding.
+
+RFC 2045 defines a method for including character set information in an
+'encoded-word' in a header.  This method is commonly used for 8-bit real names
+in To:/From:/Cc: etc. fields, as well as Subject: lines.
+
+This module does not do the line wrapping or end-of-line character
+conversion necessary for proper internationalized headers; it only
+does dumb encoding and decoding.  To deal with the various line
+wrapping issues, use the email.header module.
+"""
+
+__all__ = [
+    'body_decode',
+    'body_encode',
+    'body_length',
+    'decode',
+    'decodestring',
+    'header_decode',
+    'header_encode',
+    'header_length',
+    'quote',
+    'unquote',
+    ]
+
+import re
+
+from string import ascii_letters, digits, hexdigits
+
+CRLF = '\r\n'
+NL = '\n'
+EMPTYSTRING = ''
+
+# Build a mapping of octets to the expansion of that octet.  Since we're only
+# going to have 256 of these things, this isn't terribly inefficient
+# space-wise.  Remember that headers and bodies have different sets of safe
+# characters.  Initialize both maps with the full expansion, and then override
+# the safe bytes with the more compact form.
+_QUOPRI_MAP = ['=%02X' % c for c in range(256)]
+_QUOPRI_HEADER_MAP = _QUOPRI_MAP[:]
+_QUOPRI_BODY_MAP = _QUOPRI_MAP[:]
+
+# Safe header bytes which need no encoding.
+for c in b'-!*+/' + ascii_letters.encode('ascii') + digits.encode('ascii'):
+    _QUOPRI_HEADER_MAP[c] = chr(c)
+# Headers have one other special encoding; spaces become underscores.
+_QUOPRI_HEADER_MAP[ord(' ')] = '_'
+
+# Safe body bytes which need no encoding.
+for c in (b' !"#$%&\'()*+,-./0123456789:;<>'
+          b'?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`'
+          b'abcdefghijklmnopqrstuvwxyz{|}~\t'):
+    _QUOPRI_BODY_MAP[c] = chr(c)
+
+
+
+# Helpers
+def header_check(octet):
+    """Return True if the octet should be escaped with header quopri."""
+    return chr(octet) != _QUOPRI_HEADER_MAP[octet]
+
+
+def body_check(octet):
+    """Return True if the octet should be escaped with body quopri."""
+    return chr(octet) != _QUOPRI_BODY_MAP[octet]
+
+
+def header_length(bytearray):
+    """Return a header quoted-printable encoding length.
+
+    Note that this does not include any RFC 2047 chrome added by
+    `header_encode()`.
+
+    :param bytearray: An array of bytes (a.k.a. octets).
+    :return: The length in bytes of the byte array when it is encoded with
+        quoted-printable for headers.
+    """
+    return sum(len(_QUOPRI_HEADER_MAP[octet]) for octet in bytearray)
+
+
+def body_length(bytearray):
+    """Return a body quoted-printable encoding length.
+
+    :param bytearray: An array of bytes (a.k.a. octets).
+    :return: The length in bytes of the byte array when it is encoded with
+        quoted-printable for bodies.
+    """
+    return sum(len(_QUOPRI_BODY_MAP[octet]) for octet in bytearray)
+
+
+def _max_append(L, s, maxlen, extra=''):
+    if not isinstance(s, str):
+        s = chr(s)
+    if not L:
+        L.append(s.lstrip())
+    elif len(L[-1]) + len(s) <= maxlen:
+        L[-1] += extra + s
+    else:
+        L.append(s.lstrip())
+
+
+def unquote(s):
+    """Turn a string in the form =AB to the ASCII character with value 0xab"""
+    return chr(int(s[1:3], 16))
+
+
+def quote(c):
+    return _QUOPRI_MAP[ord(c)]
+
+
+def header_encode(header_bytes, charset='iso-8859-1'):
+    """Encode a single header line with quoted-printable (like) encoding.
+
+    Defined in RFC 2045, this 'Q' encoding is similar to quoted-printable, but
+    used specifically for email header fields to allow charsets with mostly 7
+    bit characters (and some 8 bit) to remain more or less readable in non-RFC
+    2045 aware mail clients.
+
+    charset names the character set to use in the RFC 2046 header.  It
+    defaults to iso-8859-1.
+    """
+    # Return empty headers as an empty string.
+    if not header_bytes:
+        return ''
+    # Iterate over every byte, encoding if necessary.
+    encoded = header_bytes.decode('latin1').translate(_QUOPRI_HEADER_MAP)
+    # Now add the RFC chrome to each encoded chunk and glue the chunks
+    # together.
+    return '=?%s?q?%s?=' % (charset, encoded)
+
+
+_QUOPRI_BODY_ENCODE_MAP = _QUOPRI_BODY_MAP[:]
+for c in b'\r\n':
+    _QUOPRI_BODY_ENCODE_MAP[c] = chr(c)
+del c
+
+def body_encode(body, maxlinelen=76, eol=NL):
+    """Encode with quoted-printable, wrapping at maxlinelen characters.
+
+    Each line of encoded text will end with eol, which defaults to "\\n".  Set
+    this to "\\r\\n" if you will be using the result of this function directly
+    in an email.
+
+    Each line will be wrapped at, at most, maxlinelen characters before the
+    eol string (maxlinelen defaults to 76 characters, the maximum value
+    permitted by RFC 2045).  Long lines will have the 'soft line break'
+    quoted-printable character "=" appended to them, so the decoded text will
+    be identical to the original text.
+
+    The minimum maxlinelen is 4 to have room for a quoted character ("=XX")
+    followed by a soft line break.  Smaller values will generate a
+    ValueError.
+
+    """
+
+    if maxlinelen < 4:
+        raise ValueError("maxlinelen must be at least 4")
+    if not body:
+        return body
+
+    # quote special characters
+    body = body.translate(_QUOPRI_BODY_ENCODE_MAP)
+
+    soft_break = '=' + eol
+    # leave space for the '=' at the end of a line
+    maxlinelen1 = maxlinelen - 1
+
+    encoded_body = []
+    append = encoded_body.append
+
+    for line in body.splitlines():
+        # break up the line into pieces no longer than maxlinelen - 1
+        start = 0
+        laststart = len(line) - 1 - maxlinelen
+        while start <= laststart:
+            stop = start + maxlinelen1
+            # make sure we don't break up an escape sequence
+            if line[stop - 2] == '=':
+                append(line[start:stop - 1])
+                start = stop - 2
+            elif line[stop - 1] == '=':
+                append(line[start:stop])
+                start = stop - 1
+            else:
+                append(line[start:stop] + '=')
+                start = stop
+
+        # handle rest of line, special case if line ends in whitespace
+        if line and line[-1] in ' \t':
+            room = start - laststart
+            if room >= 3:
+                # It's a whitespace character at end-of-line, and we have room
+                # for the three-character quoted encoding.
+                q = quote(line[-1])
+            elif room == 2:
+                # There's room for the whitespace character and a soft break.
+                q = line[-1] + soft_break
+            else:
+                # There's room only for a soft break.  The quoted whitespace
+                # will be the only content on the subsequent line.
+                q = soft_break + quote(line[-1])
+            append(line[start:-1] + q)
+        else:
+            append(line[start:])
+
+    # add back final newline if present
+    if body[-1] in CRLF:
+        append('')
+
+    return eol.join(encoded_body)
+
+
+
+# BAW: I'm not sure if the intent was for the signature of this function to be
+# the same as base64MIME.decode() or not...
+def decode(encoded, eol=NL):
+    """Decode a quoted-printable string.
+
+    Lines are separated with eol, which defaults to \\n.
+    """
+    if not encoded:
+        return encoded
+    # BAW: see comment in encode() above.  Again, we're building up the
+    # decoded string with string concatenation, which could be done much more
+    # efficiently.
+    decoded = ''
+
+    for line in encoded.splitlines():
+        line = line.rstrip()
+        if not line:
+            decoded += eol
+            continue
+
+        i = 0
+        n = len(line)
+        while i < n:
+            c = line[i]
+            if c != '=':
+                decoded += c
+                i += 1
+            # Otherwise, c == "=".  Are we at the end of the line?  If so, add
+            # a soft line break.
+            elif i+1 == n:
+                i += 1
+                continue
+            # Decode if in form =AB
+            elif i+2 < n and line[i+1] in hexdigits and line[i+2] in hexdigits:
+                decoded += unquote(line[i:i+3])
+                i += 3
+            # Otherwise, not in form =AB, pass literally
+            else:
+                decoded += c
+                i += 1
+
+            if i == n:
+                decoded += eol
+    # Special case if original string did not end with eol
+    if encoded[-1] not in '\r\n' and decoded.endswith(eol):
+        decoded = decoded[:-1]
+    return decoded
+
+
+# For convenience and backwards compatibility w/ standard base64 module
+body_decode = decode
+decodestring = decode
+
+
+
+def _unquote_match(match):
+    """Turn a match in the form =AB to the ASCII character with value 0xab"""
+    s = match.group(0)
+    return unquote(s)
+
+
+# Header decoding is done a bit differently
+def header_decode(s):
+    """Decode a string encoded with RFC 2045 MIME header 'Q' encoding.
+
+    This function does not parse a full MIME header value encoded with
+    quoted-printable (like =?iso-8859-1?q?Hello_World?=) -- please use
+    the high level email.header class for that functionality.
+    """
+    s = s.replace('_', ' ')
+    return re.sub(r'=[a-fA-F0-9]{2}', _unquote_match, s, flags=re.ASCII)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/utils.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/utils.py
new file mode 100644
index 0000000000000000000000000000000000000000..3de1f0d24a15b0aa032c6b4a907dcf6ffd371ee9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/email/utils.py
@@ -0,0 +1,486 @@
+# Copyright (C) 2001 Python Software Foundation
+# Author: Barry Warsaw
+# Contact: email-sig@python.org
+
+"""Miscellaneous utilities."""
+
+__all__ = [
+    'collapse_rfc2231_value',
+    'decode_params',
+    'decode_rfc2231',
+    'encode_rfc2231',
+    'formataddr',
+    'formatdate',
+    'format_datetime',
+    'getaddresses',
+    'make_msgid',
+    'mktime_tz',
+    'parseaddr',
+    'parsedate',
+    'parsedate_tz',
+    'parsedate_to_datetime',
+    'unquote',
+    ]
+
+import os
+import re
+import time
+import datetime
+import urllib.parse
+
+from email._parseaddr import quote
+from email._parseaddr import AddressList as _AddressList
+from email._parseaddr import mktime_tz
+
+from email._parseaddr import parsedate, parsedate_tz, _parsedate_tz
+
+COMMASPACE = ', '
+EMPTYSTRING = ''
+UEMPTYSTRING = ''
+CRLF = '\r\n'
+TICK = "'"
+
+specialsre = re.compile(r'[][\\()<>@,:;".]')
+escapesre = re.compile(r'[\\"]')
+
+
+def _has_surrogates(s):
+    """Return True if s may contain surrogate-escaped binary data."""
+    # This check is based on the fact that unless there are surrogates, utf8
+    # (Python's default encoding) can encode any string.  This is the fastest
+    # way to check for surrogates, see bpo-11454 (moved to gh-55663) for timings.
+    try:
+        s.encode()
+        return False
+    except UnicodeEncodeError:
+        return True
+
+# How to deal with a string containing bytes before handing it to the
+# application through the 'normal' interface.
+def _sanitize(string):
+    # Turn any escaped bytes into unicode 'unknown' char.  If the escaped
+    # bytes happen to be utf-8 they will instead get decoded, even if they
+    # were invalid in the charset the source was supposed to be in.  This
+    # seems like it is not a bad thing; a defect was still registered.
+    original_bytes = string.encode('utf-8', 'surrogateescape')
+    return original_bytes.decode('utf-8', 'replace')
+
+
+
+# Helpers
+
+def formataddr(pair, charset='utf-8'):
+    """The inverse of parseaddr(), this takes a 2-tuple of the form
+    (realname, email_address) and returns the string value suitable
+    for an RFC 2822 From, To or Cc header.
+
+    If the first element of pair is false, then the second element is
+    returned unmodified.
+
+    The optional charset is the character set that is used to encode
+    realname in case realname is not ASCII safe.  Can be an instance of str or
+    a Charset-like object which has a header_encode method.  Default is
+    'utf-8'.
+    """
+    name, address = pair
+    # The address MUST (per RFC) be ascii, so raise a UnicodeError if it isn't.
+    address.encode('ascii')
+    if name:
+        try:
+            name.encode('ascii')
+        except UnicodeEncodeError:
+            if isinstance(charset, str):
+                # lazy import to improve module import time
+                from email.charset import Charset
+                charset = Charset(charset)
+            encoded_name = charset.header_encode(name)
+            return "%s <%s>" % (encoded_name, address)
+        else:
+            quotes = ''
+            if specialsre.search(name):
+                quotes = '"'
+            name = escapesre.sub(r'\\\g<0>', name)
+            return '%s%s%s <%s>' % (quotes, name, quotes, address)
+    return address
+
+
+def _iter_escaped_chars(addr):
+    pos = 0
+    escape = False
+    for pos, ch in enumerate(addr):
+        if escape:
+            yield (pos, '\\' + ch)
+            escape = False
+        elif ch == '\\':
+            escape = True
+        else:
+            yield (pos, ch)
+    if escape:
+        yield (pos, '\\')
+
+
+def _strip_quoted_realnames(addr):
+    """Strip real names between quotes."""
+    if '"' not in addr:
+        # Fast path
+        return addr
+
+    start = 0
+    open_pos = None
+    result = []
+    for pos, ch in _iter_escaped_chars(addr):
+        if ch == '"':
+            if open_pos is None:
+                open_pos = pos
+            else:
+                if start != open_pos:
+                    result.append(addr[start:open_pos])
+                start = pos + 1
+                open_pos = None
+
+    if start < len(addr):
+        result.append(addr[start:])
+
+    return ''.join(result)
+
+
+supports_strict_parsing = True
+
+def getaddresses(fieldvalues, *, strict=True):
+    """Return a list of (REALNAME, EMAIL) or ('','') for each fieldvalue.
+
+    When parsing fails for a fieldvalue, a 2-tuple of ('', '') is returned in
+    its place.
+
+    If strict is true, use a strict parser which rejects malformed inputs.
+    """
+
+    # If strict is true, if the resulting list of parsed addresses is greater
+    # than the number of fieldvalues in the input list, a parsing error has
+    # occurred and consequently a list containing a single empty 2-tuple [('',
+    # '')] is returned in its place. This is done to avoid invalid output.
+    #
+    # Malformed input: getaddresses(['alice@example.com <bob@example.com>'])
+    # Invalid output: [('', 'alice@example.com'), ('', 'bob@example.com')]
+    # Safe output: [('', '')]
+
+    if not strict:
+        all = COMMASPACE.join(str(v) for v in fieldvalues)
+        a = _AddressList(all)
+        return a.addresslist
+
+    fieldvalues = [str(v) for v in fieldvalues]
+    fieldvalues = _pre_parse_validation(fieldvalues)
+    addr = COMMASPACE.join(fieldvalues)
+    a = _AddressList(addr)
+    result = _post_parse_validation(a.addresslist)
+
+    # Treat output as invalid if the number of addresses is not equal to the
+    # expected number of addresses.
+    n = 0
+    for v in fieldvalues:
+        # When a comma is used in the Real Name part it is not a deliminator.
+        # So strip those out before counting the commas.
+        v = _strip_quoted_realnames(v)
+        # Expected number of addresses: 1 + number of commas
+        n += 1 + v.count(',')
+    if len(result) != n:
+        return [('', '')]
+
+    return result
+
+
+def _check_parenthesis(addr):
+    # Ignore parenthesis in quoted real names.
+    addr = _strip_quoted_realnames(addr)
+
+    opens = 0
+    for pos, ch in _iter_escaped_chars(addr):
+        if ch == '(':
+            opens += 1
+        elif ch == ')':
+            opens -= 1
+            if opens < 0:
+                return False
+    return (opens == 0)
+
+
+def _pre_parse_validation(email_header_fields):
+    accepted_values = []
+    for v in email_header_fields:
+        if not _check_parenthesis(v):
+            v = "('', '')"
+        accepted_values.append(v)
+
+    return accepted_values
+
+
+def _post_parse_validation(parsed_email_header_tuples):
+    accepted_values = []
+    # The parser would have parsed a correctly formatted domain-literal
+    # The existence of an [ after parsing indicates a parsing failure
+    for v in parsed_email_header_tuples:
+        if '[' in v[1]:
+            v = ('', '')
+        accepted_values.append(v)
+
+    return accepted_values
+
+
+def _format_timetuple_and_zone(timetuple, zone):
+    return '%s, %02d %s %04d %02d:%02d:%02d %s' % (
+        ['Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat', 'Sun'][timetuple[6]],
+        timetuple[2],
+        ['Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
+         'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'][timetuple[1] - 1],
+        timetuple[0], timetuple[3], timetuple[4], timetuple[5],
+        zone)
+
+def formatdate(timeval=None, localtime=False, usegmt=False):
+    """Returns a date string as specified by RFC 2822, e.g.:
+
+    Fri, 09 Nov 2001 01:08:47 -0000
+
+    Optional timeval if given is a floating-point time value as accepted by
+    gmtime() and localtime(), otherwise the current time is used.
+
+    Optional localtime is a flag that when True, interprets timeval, and
+    returns a date relative to the local timezone instead of UTC, properly
+    taking daylight savings time into account.
+
+    Optional argument usegmt means that the timezone is written out as
+    an ascii string, not numeric one (so "GMT" instead of "+0000"). This
+    is needed for HTTP, and is only used when localtime==False.
+    """
+    # Note: we cannot use strftime() because that honors the locale and RFC
+    # 2822 requires that day and month names be the English abbreviations.
+    if timeval is None:
+        timeval = time.time()
+    dt = datetime.datetime.fromtimestamp(timeval, datetime.timezone.utc)
+
+    if localtime:
+        dt = dt.astimezone()
+        usegmt = False
+    elif not usegmt:
+        dt = dt.replace(tzinfo=None)
+    return format_datetime(dt, usegmt)
+
+def format_datetime(dt, usegmt=False):
+    """Turn a datetime into a date string as specified in RFC 2822.
+
+    If usegmt is True, dt must be an aware datetime with an offset of zero.  In
+    this case 'GMT' will be rendered instead of the normal +0000 required by
+    RFC2822.  This is to support HTTP headers involving date stamps.
+    """
+    now = dt.timetuple()
+    if usegmt:
+        if dt.tzinfo is None or dt.tzinfo != datetime.timezone.utc:
+            raise ValueError("usegmt option requires a UTC datetime")
+        zone = 'GMT'
+    elif dt.tzinfo is None:
+        zone = '-0000'
+    else:
+        zone = dt.strftime("%z")
+    return _format_timetuple_and_zone(now, zone)
+
+
+def make_msgid(idstring=None, domain=None):
+    """Returns a string suitable for RFC 2822 compliant Message-ID, e.g:
+
+    <142480216486.20800.16526388040877946887@nightshade.la.mastaler.com>
+
+    Optional idstring if given is a string used to strengthen the
+    uniqueness of the message id.  Optional domain if given provides the
+    portion of the message id after the '@'.  It defaults to the locally
+    defined hostname.
+    """
+    # Lazy imports to speedup module import time
+    # (no other functions in email.utils need these modules)
+    import random
+    import socket
+
+    timeval = int(time.time()*100)
+    pid = os.getpid()
+    randint = random.getrandbits(64)
+    if idstring is None:
+        idstring = ''
+    else:
+        idstring = '.' + idstring
+    if domain is None:
+        domain = socket.getfqdn()
+    msgid = '<%d.%d.%d%s@%s>' % (timeval, pid, randint, idstring, domain)
+    return msgid
+
+
+def parsedate_to_datetime(data):
+    parsed_date_tz = _parsedate_tz(data)
+    if parsed_date_tz is None:
+        raise ValueError('Invalid date value or format "%s"' % str(data))
+    *dtuple, tz = parsed_date_tz
+    if tz is None:
+        return datetime.datetime(*dtuple[:6])
+    return datetime.datetime(*dtuple[:6],
+            tzinfo=datetime.timezone(datetime.timedelta(seconds=tz)))
+
+
+def parseaddr(addr, *, strict=True):
+    """
+    Parse addr into its constituent realname and email address parts.
+
+    Return a tuple of realname and email address, unless the parse fails, in
+    which case return a 2-tuple of ('', '').
+
+    If strict is True, use a strict parser which rejects malformed inputs.
+    """
+    if not strict:
+        addrs = _AddressList(addr).addresslist
+        if not addrs:
+            return ('', '')
+        return addrs[0]
+
+    if isinstance(addr, list):
+        addr = addr[0]
+
+    if not isinstance(addr, str):
+        return ('', '')
+
+    addr = _pre_parse_validation([addr])[0]
+    addrs = _post_parse_validation(_AddressList(addr).addresslist)
+
+    if not addrs or len(addrs) > 1:
+        return ('', '')
+
+    return addrs[0]
+
+
+# rfc822.unquote() doesn't properly de-backslash-ify in Python pre-2.3.
+def unquote(str):
+    """Remove quotes from a string."""
+    if len(str) > 1:
+        if str.startswith('"') and str.endswith('"'):
+            return str[1:-1].replace('\\\\', '\\').replace('\\"', '"')
+        if str.startswith('<') and str.endswith('>'):
+            return str[1:-1]
+    return str
+
+
+
+# RFC2231-related functions - parameter encoding and decoding
+def decode_rfc2231(s):
+    """Decode string according to RFC 2231"""
+    parts = s.split(TICK, 2)
+    if len(parts) <= 2:
+        return None, None, s
+    return parts
+
+
+def encode_rfc2231(s, charset=None, language=None):
+    """Encode string according to RFC 2231.
+
+    If neither charset nor language is given, then s is returned as-is.  If
+    charset is given but not language, the string is encoded using the empty
+    string for language.
+    """
+    s = urllib.parse.quote(s, safe='', encoding=charset or 'ascii')
+    if charset is None and language is None:
+        return s
+    if language is None:
+        language = ''
+    return "%s'%s'%s" % (charset, language, s)
+
+
+rfc2231_continuation = re.compile(r'^(?P<name>\w+)\*((?P<num>[0-9]+)\*?)?$',
+    re.ASCII)
+
+def decode_params(params):
+    """Decode parameters list according to RFC 2231.
+
+    params is a sequence of 2-tuples containing (param name, string value).
+    """
+    new_params = [params[0]]
+    # Map parameter's name to a list of continuations.  The values are a
+    # 3-tuple of the continuation number, the string value, and a flag
+    # specifying whether a particular segment is %-encoded.
+    rfc2231_params = {}
+    for name, value in params[1:]:
+        encoded = name.endswith('*')
+        value = unquote(value)
+        mo = rfc2231_continuation.match(name)
+        if mo:
+            name, num = mo.group('name', 'num')
+            if num is not None:
+                num = int(num)
+            rfc2231_params.setdefault(name, []).append((num, value, encoded))
+        else:
+            new_params.append((name, '"%s"' % quote(value)))
+    if rfc2231_params:
+        for name, continuations in rfc2231_params.items():
+            value = []
+            extended = False
+            # Sort by number, treating None as 0 if there is no 0,
+            # and ignore it if there is already a 0.
+            has_zero = any(x[0] == 0 for x in continuations)
+            if has_zero:
+                continuations = [x for x in continuations if x[0] is not None]
+            else:
+                continuations = [(x[0] or 0, x[1], x[2]) for x in continuations]
+            continuations.sort(key=lambda x: x[0])
+            # And now append all values in numerical order, converting
+            # %-encodings for the encoded segments.  If any of the
+            # continuation names ends in a *, then the entire string, after
+            # decoding segments and concatenating, must have the charset and
+            # language specifiers at the beginning of the string.
+            for num, s, encoded in continuations:
+                if encoded:
+                    # Decode as "latin-1", so the characters in s directly
+                    # represent the percent-encoded octet values.
+                    # collapse_rfc2231_value treats this as an octet sequence.
+                    s = urllib.parse.unquote(s, encoding="latin-1")
+                    extended = True
+                value.append(s)
+            value = quote(EMPTYSTRING.join(value))
+            if extended:
+                charset, language, value = decode_rfc2231(value)
+                new_params.append((name, (charset, language, '"%s"' % value)))
+            else:
+                new_params.append((name, '"%s"' % value))
+    return new_params
+
+def collapse_rfc2231_value(value, errors='replace',
+                           fallback_charset='us-ascii'):
+    if not isinstance(value, tuple) or len(value) != 3:
+        return unquote(value)
+    # While value comes to us as a unicode string, we need it to be a bytes
+    # object.  We do not want bytes() normal utf-8 decoder, we want a straight
+    # interpretation of the string as character bytes.
+    charset, language, text = value
+    if charset is None:
+        # Issue 17369: if charset/lang is None, decode_rfc2231 couldn't parse
+        # the value, so use the fallback_charset.
+        charset = fallback_charset
+    rawbytes = bytes(text, 'raw-unicode-escape')
+    try:
+        return str(rawbytes, charset, errors)
+    except LookupError:
+        # charset is not a known codec.
+        return unquote(text)
+
+
+#
+# datetime doesn't provide a localtime function yet, so provide one.  Code
+# adapted from the patch in issue 9527.  This may not be perfect, but it is
+# better than not having it.
+#
+
+def localtime(dt=None):
+    """Return local time as an aware datetime object.
+
+    If called without arguments, return current time.  Otherwise *dt*
+    argument should be a datetime instance, and it is converted to the
+    local time zone according to the system time zone database.  If *dt* is
+    naive (that is, dt.tzinfo is None), it is assumed to be in local time.
+
+    """
+    if dt is None:
+        dt = datetime.datetime.now()
+    return dt.astimezone()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..8548bbe04ad37c90c07867f79229624d759369bd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/__init__.py
@@ -0,0 +1,182 @@
+""" Standard "encodings" Package
+
+    Standard Python encoding modules are stored in this package
+    directory.
+
+    Codec modules must have names corresponding to normalized encoding
+    names as defined in the normalize_encoding() function below, e.g.
+    'utf-8' must be implemented by the module 'utf_8.py'.
+
+    Each codec module must export the following interface:
+
+    * getregentry() -> codecs.CodecInfo object
+    The getregentry() API must return a CodecInfo object with encoder, decoder,
+    incrementalencoder, incrementaldecoder, streamwriter and streamreader
+    attributes which adhere to the Python Codec Interface Standard.
+
+    In addition, a module may optionally also define the following
+    APIs which are then used by the package's codec search function:
+
+    * getaliases() -> sequence of encoding name strings to use as aliases
+
+    Alias names returned by getaliases() must be normalized encoding
+    names as defined by normalize_encoding().
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""#"
+
+import codecs
+import sys
+from . import aliases
+
+_cache = {}
+_MAXCACHE = 500
+_unknown = '--unknown--'
+_import_tail = ['*']
+_aliases = aliases.aliases
+
+class CodecRegistryError(LookupError, SystemError):
+    pass
+
+def normalize_encoding(encoding):
+
+    """ Normalize an encoding name.
+
+        Normalization works as follows: all non-alphanumeric
+        characters except the dot used for Python package names are
+        collapsed and replaced with a single underscore, e.g. '  -;#'
+        becomes '_'. Leading and trailing underscores are removed.
+
+        Note that encoding names should be ASCII only.
+
+    """
+    if isinstance(encoding, bytes):
+        encoding = str(encoding, "ascii")
+
+    chars = []
+    punct = False
+    for c in encoding:
+        if c.isalnum() or c == '.':
+            if punct and chars:
+                chars.append('_')
+            if c.isascii():
+                chars.append(c)
+            punct = False
+        else:
+            punct = True
+    return ''.join(chars)
+
+def search_function(encoding):
+
+    # Cache lookup
+    entry = _cache.get(encoding, _unknown)
+    if entry is not _unknown:
+        return entry
+
+    # Import the module:
+    #
+    # First try to find an alias for the normalized encoding
+    # name and lookup the module using the aliased name, then try to
+    # lookup the module using the standard import scheme, i.e. first
+    # try in the encodings package, then at top-level.
+    #
+    norm_encoding = normalize_encoding(encoding)
+    aliased_encoding = _aliases.get(norm_encoding) or \
+                       _aliases.get(norm_encoding.replace('.', '_'))
+    if aliased_encoding is not None:
+        modnames = [aliased_encoding,
+                    norm_encoding]
+    else:
+        modnames = [norm_encoding]
+    for modname in modnames:
+        if not modname or '.' in modname:
+            continue
+        try:
+            # Import is absolute to prevent the possibly malicious import of a
+            # module with side-effects that is not in the 'encodings' package.
+            mod = __import__('encodings.' + modname, fromlist=_import_tail,
+                             level=0)
+        except ImportError:
+            # ImportError may occur because 'encodings.(modname)' does not exist,
+            # or because it imports a name that does not exist (see mbcs and oem)
+            pass
+        else:
+            break
+    else:
+        mod = None
+
+    try:
+        getregentry = mod.getregentry
+    except AttributeError:
+        # Not a codec module
+        mod = None
+
+    if mod is None:
+        # Cache misses
+        if len(_cache) >= _MAXCACHE:
+            _cache.clear()
+        _cache[encoding] = None
+        return None
+
+    # Now ask the module for the registry entry
+    entry = getregentry()
+    if not isinstance(entry, codecs.CodecInfo):
+        if not 4 <= len(entry) <= 7:
+            raise CodecRegistryError('module "%s" (%s) failed to register'
+                                     % (mod.__name__, mod.__file__))
+        if not callable(entry[0]) or not callable(entry[1]) or \
+           (entry[2] is not None and not callable(entry[2])) or \
+           (entry[3] is not None and not callable(entry[3])) or \
+           (len(entry) > 4 and entry[4] is not None and not callable(entry[4])) or \
+           (len(entry) > 5 and entry[5] is not None and not callable(entry[5])):
+            raise CodecRegistryError('incompatible codecs in module "%s" (%s)'
+                                     % (mod.__name__, mod.__file__))
+        if len(entry)<7 or entry[6] is None:
+            entry += (None,)*(6-len(entry)) + (mod.__name__.split(".", 1)[1],)
+        entry = codecs.CodecInfo(*entry)
+
+    # Cache the codec registry entry
+    if len(_cache) >= _MAXCACHE:
+        _cache.clear()
+    _cache[encoding] = entry
+
+    # Register its aliases (without overwriting previously registered
+    # aliases)
+    try:
+        codecaliases = mod.getaliases()
+    except AttributeError:
+        pass
+    else:
+        for alias in codecaliases:
+            if alias not in _aliases:
+                _aliases[alias] = modname
+
+    # Return the registry entry
+    return entry
+
+# Register the search_function in the Python codec registry
+codecs.register(search_function)
+
+if sys.platform == 'win32':
+    from ._win_cp_codecs import create_win32_code_page_codec
+
+    def win32_code_page_search_function(encoding):
+        encoding = encoding.lower()
+        if not encoding.startswith('cp'):
+            return None
+        try:
+            cp = int(encoding[2:])
+        except ValueError:
+            return None
+        # Test if the code page is supported
+        try:
+            codecs.code_page_encode(cp, 'x')
+        except (OverflowError, OSError):
+            return None
+
+        return create_win32_code_page_codec(cp)
+
+    codecs.register(win32_code_page_search_function)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/_win_cp_codecs.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/_win_cp_codecs.py
new file mode 100644
index 0000000000000000000000000000000000000000..4f8eb886794404f4272c985166c789567e7fbda0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/_win_cp_codecs.py
@@ -0,0 +1,36 @@
+import codecs
+
+def create_win32_code_page_codec(cp):
+    from codecs import code_page_encode, code_page_decode
+
+    def encode(input, errors='strict'):
+        return code_page_encode(cp, input, errors)
+
+    def decode(input, errors='strict'):
+        return code_page_decode(cp, input, errors, True)
+
+    class IncrementalEncoder(codecs.IncrementalEncoder):
+        def encode(self, input, final=False):
+            return code_page_encode(cp, input, self.errors)[0]
+
+    class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+        def _buffer_decode(self, input, errors, final):
+            return code_page_decode(cp, input, errors, final)
+
+    class StreamWriter(codecs.StreamWriter):
+        def encode(self, input, errors='strict'):
+            return code_page_encode(cp, input, errors)
+
+    class StreamReader(codecs.StreamReader):
+        def decode(self, input, errors, final):
+            return code_page_decode(cp, input, errors, final)
+
+    return codecs.CodecInfo(
+        name=f'cp{cp}',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/aliases.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/aliases.py
new file mode 100644
index 0000000000000000000000000000000000000000..4ecb6b6e297a13b31b49394251c7a2a068752c71
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/aliases.py
@@ -0,0 +1,560 @@
+""" Encoding Aliases Support
+
+    This module is used by the encodings package search function to
+    map encodings names to module names.
+
+    Note that the search function normalizes the encoding names before
+    doing the lookup, so the mapping will have to map normalized
+    encoding names to module names.
+
+    Contents:
+
+        The following aliases dictionary contains mappings of all IANA
+        character set names for which the Python core library provides
+        codecs. In addition to these, a few Python specific codec
+        aliases have also been added.
+
+"""
+aliases = {
+
+    # Please keep this list sorted alphabetically by value !
+
+    # ascii codec
+    '646'                : 'ascii',
+    'ansi_x3.4_1968'     : 'ascii',
+    'ansi_x3_4_1968'     : 'ascii', # some email headers use this non-standard name
+    'ansi_x3.4_1986'     : 'ascii',
+    'cp367'              : 'ascii',
+    'csascii'            : 'ascii',
+    'ibm367'             : 'ascii',
+    'iso646_us'          : 'ascii',
+    'iso_646.irv_1991'   : 'ascii',
+    'iso_ir_6'           : 'ascii',
+    'us'                 : 'ascii',
+    'us_ascii'           : 'ascii',
+
+    # base64_codec codec
+    'base64'             : 'base64_codec',
+    'base_64'            : 'base64_codec',
+
+    # big5 codec
+    'big5_tw'            : 'big5',
+    'csbig5'             : 'big5',
+
+    # big5hkscs codec
+    'big5_hkscs'         : 'big5hkscs',
+    'hkscs'              : 'big5hkscs',
+
+    # bz2_codec codec
+    'bz2'                : 'bz2_codec',
+
+    # cp037 codec
+    '037'                : 'cp037',
+    'csibm037'           : 'cp037',
+    'ebcdic_cp_ca'       : 'cp037',
+    'ebcdic_cp_nl'       : 'cp037',
+    'ebcdic_cp_us'       : 'cp037',
+    'ebcdic_cp_wt'       : 'cp037',
+    'ibm037'             : 'cp037',
+    'ibm039'             : 'cp037',
+
+    # cp1026 codec
+    '1026'               : 'cp1026',
+    'csibm1026'          : 'cp1026',
+    'ibm1026'            : 'cp1026',
+
+    # cp1125 codec
+    '1125'                : 'cp1125',
+    'ibm1125'             : 'cp1125',
+    'cp866u'              : 'cp1125',
+    'ruscii'              : 'cp1125',
+
+    # cp1140 codec
+    '1140'               : 'cp1140',
+    'ibm1140'            : 'cp1140',
+
+    # cp1250 codec
+    '1250'               : 'cp1250',
+    'windows_1250'       : 'cp1250',
+
+    # cp1251 codec
+    '1251'               : 'cp1251',
+    'windows_1251'       : 'cp1251',
+
+    # cp1252 codec
+    '1252'               : 'cp1252',
+    'windows_1252'       : 'cp1252',
+
+    # cp1253 codec
+    '1253'               : 'cp1253',
+    'windows_1253'       : 'cp1253',
+
+    # cp1254 codec
+    '1254'               : 'cp1254',
+    'windows_1254'       : 'cp1254',
+
+    # cp1255 codec
+    '1255'               : 'cp1255',
+    'windows_1255'       : 'cp1255',
+
+    # cp1256 codec
+    '1256'               : 'cp1256',
+    'windows_1256'       : 'cp1256',
+
+    # cp1257 codec
+    '1257'               : 'cp1257',
+    'windows_1257'       : 'cp1257',
+
+    # cp1258 codec
+    '1258'               : 'cp1258',
+    'windows_1258'       : 'cp1258',
+
+    # cp273 codec
+    '273'                : 'cp273',
+    'ibm273'             : 'cp273',
+    'csibm273'           : 'cp273',
+
+    # cp424 codec
+    '424'                : 'cp424',
+    'csibm424'           : 'cp424',
+    'ebcdic_cp_he'       : 'cp424',
+    'ibm424'             : 'cp424',
+
+    # cp437 codec
+    '437'                : 'cp437',
+    'cspc8codepage437'   : 'cp437',
+    'ibm437'             : 'cp437',
+
+    # cp500 codec
+    '500'                : 'cp500',
+    'csibm500'           : 'cp500',
+    'ebcdic_cp_be'       : 'cp500',
+    'ebcdic_cp_ch'       : 'cp500',
+    'ibm500'             : 'cp500',
+
+    # cp775 codec
+    '775'                : 'cp775',
+    'cspc775baltic'      : 'cp775',
+    'ibm775'             : 'cp775',
+
+    # cp850 codec
+    '850'                : 'cp850',
+    'cspc850multilingual' : 'cp850',
+    'ibm850'             : 'cp850',
+
+    # cp852 codec
+    '852'                : 'cp852',
+    'cspcp852'           : 'cp852',
+    'ibm852'             : 'cp852',
+
+    # cp855 codec
+    '855'                : 'cp855',
+    'csibm855'           : 'cp855',
+    'ibm855'             : 'cp855',
+
+    # cp857 codec
+    '857'                : 'cp857',
+    'csibm857'           : 'cp857',
+    'ibm857'             : 'cp857',
+
+    # cp858 codec
+    '858'                : 'cp858',
+    'csibm858'           : 'cp858',
+    'ibm858'             : 'cp858',
+
+    # cp860 codec
+    '860'                : 'cp860',
+    'csibm860'           : 'cp860',
+    'ibm860'             : 'cp860',
+
+    # cp861 codec
+    '861'                : 'cp861',
+    'cp_is'              : 'cp861',
+    'csibm861'           : 'cp861',
+    'ibm861'             : 'cp861',
+
+    # cp862 codec
+    '862'                : 'cp862',
+    'cspc862latinhebrew' : 'cp862',
+    'ibm862'             : 'cp862',
+
+    # cp863 codec
+    '863'                : 'cp863',
+    'csibm863'           : 'cp863',
+    'ibm863'             : 'cp863',
+
+    # cp864 codec
+    '864'                : 'cp864',
+    'csibm864'           : 'cp864',
+    'ibm864'             : 'cp864',
+
+    # cp865 codec
+    '865'                : 'cp865',
+    'csibm865'           : 'cp865',
+    'ibm865'             : 'cp865',
+
+    # cp866 codec
+    '866'                : 'cp866',
+    'csibm866'           : 'cp866',
+    'ibm866'             : 'cp866',
+
+    # cp869 codec
+    '869'                : 'cp869',
+    'cp_gr'              : 'cp869',
+    'csibm869'           : 'cp869',
+    'ibm869'             : 'cp869',
+
+    # cp874 codec
+    '874'                : 'cp874',
+    'ms874'              : 'cp874',
+    'windows_874'        : 'cp874',
+
+    # cp932 codec
+    '932'                : 'cp932',
+    'ms932'              : 'cp932',
+    'mskanji'            : 'cp932',
+    'ms_kanji'           : 'cp932',
+    'windows_31j'        : 'cp932',
+
+    # cp949 codec
+    '949'                : 'cp949',
+    'ms949'              : 'cp949',
+    'uhc'                : 'cp949',
+
+    # cp950 codec
+    '950'                : 'cp950',
+    'ms950'              : 'cp950',
+
+    # euc_jis_2004 codec
+    'jisx0213'           : 'euc_jis_2004',
+    'eucjis2004'         : 'euc_jis_2004',
+    'euc_jis2004'        : 'euc_jis_2004',
+
+    # euc_jisx0213 codec
+    'eucjisx0213'        : 'euc_jisx0213',
+
+    # euc_jp codec
+    'eucjp'              : 'euc_jp',
+    'ujis'               : 'euc_jp',
+    'u_jis'              : 'euc_jp',
+
+    # euc_kr codec
+    'euckr'              : 'euc_kr',
+    'korean'             : 'euc_kr',
+    'ksc5601'            : 'euc_kr',
+    'ks_c_5601'          : 'euc_kr',
+    'ks_c_5601_1987'     : 'euc_kr',
+    'ksx1001'            : 'euc_kr',
+    'ks_x_1001'          : 'euc_kr',
+    'cseuckr'            : 'euc_kr',
+
+    # gb18030 codec
+    'gb18030_2000'       : 'gb18030',
+
+    # gb2312 codec
+    'chinese'            : 'gb2312',
+    'csiso58gb231280'    : 'gb2312',
+    'euc_cn'             : 'gb2312',
+    'euccn'              : 'gb2312',
+    'eucgb2312_cn'       : 'gb2312',
+    'gb2312_1980'        : 'gb2312',
+    'gb2312_80'          : 'gb2312',
+    'iso_ir_58'          : 'gb2312',
+
+    # gbk codec
+    '936'                : 'gbk',
+    'cp936'              : 'gbk',
+    'ms936'              : 'gbk',
+
+    # hex_codec codec
+    'hex'                : 'hex_codec',
+
+    # hp_roman8 codec
+    'roman8'             : 'hp_roman8',
+    'r8'                 : 'hp_roman8',
+    'csHPRoman8'         : 'hp_roman8',
+    'cp1051'             : 'hp_roman8',
+    'ibm1051'            : 'hp_roman8',
+
+    # hz codec
+    'hzgb'               : 'hz',
+    'hz_gb'              : 'hz',
+    'hz_gb_2312'         : 'hz',
+
+    # iso2022_jp codec
+    'csiso2022jp'        : 'iso2022_jp',
+    'iso2022jp'          : 'iso2022_jp',
+    'iso_2022_jp'        : 'iso2022_jp',
+
+    # iso2022_jp_1 codec
+    'iso2022jp_1'        : 'iso2022_jp_1',
+    'iso_2022_jp_1'      : 'iso2022_jp_1',
+
+    # iso2022_jp_2 codec
+    'iso2022jp_2'        : 'iso2022_jp_2',
+    'iso_2022_jp_2'      : 'iso2022_jp_2',
+
+    # iso2022_jp_2004 codec
+    'iso_2022_jp_2004'   : 'iso2022_jp_2004',
+    'iso2022jp_2004'     : 'iso2022_jp_2004',
+
+    # iso2022_jp_3 codec
+    'iso2022jp_3'        : 'iso2022_jp_3',
+    'iso_2022_jp_3'      : 'iso2022_jp_3',
+
+    # iso2022_jp_ext codec
+    'iso2022jp_ext'      : 'iso2022_jp_ext',
+    'iso_2022_jp_ext'    : 'iso2022_jp_ext',
+
+    # iso2022_kr codec
+    'csiso2022kr'        : 'iso2022_kr',
+    'iso2022kr'          : 'iso2022_kr',
+    'iso_2022_kr'        : 'iso2022_kr',
+
+    # iso8859_10 codec
+    'csisolatin6'        : 'iso8859_10',
+    'iso_8859_10'        : 'iso8859_10',
+    'iso_8859_10_1992'   : 'iso8859_10',
+    'iso_ir_157'         : 'iso8859_10',
+    'l6'                 : 'iso8859_10',
+    'latin6'             : 'iso8859_10',
+
+    # iso8859_11 codec
+    'thai'               : 'iso8859_11',
+    'iso_8859_11'        : 'iso8859_11',
+    'iso_8859_11_2001'   : 'iso8859_11',
+
+    # iso8859_13 codec
+    'iso_8859_13'        : 'iso8859_13',
+    'l7'                 : 'iso8859_13',
+    'latin7'             : 'iso8859_13',
+
+    # iso8859_14 codec
+    'iso_8859_14'        : 'iso8859_14',
+    'iso_8859_14_1998'   : 'iso8859_14',
+    'iso_celtic'         : 'iso8859_14',
+    'iso_ir_199'         : 'iso8859_14',
+    'l8'                 : 'iso8859_14',
+    'latin8'             : 'iso8859_14',
+
+    # iso8859_15 codec
+    'iso_8859_15'        : 'iso8859_15',
+    'l9'                 : 'iso8859_15',
+    'latin9'             : 'iso8859_15',
+
+    # iso8859_16 codec
+    'iso_8859_16'        : 'iso8859_16',
+    'iso_8859_16_2001'   : 'iso8859_16',
+    'iso_ir_226'         : 'iso8859_16',
+    'l10'                : 'iso8859_16',
+    'latin10'            : 'iso8859_16',
+
+    # iso8859_2 codec
+    'csisolatin2'        : 'iso8859_2',
+    'iso_8859_2'         : 'iso8859_2',
+    'iso_8859_2_1987'    : 'iso8859_2',
+    'iso_ir_101'         : 'iso8859_2',
+    'l2'                 : 'iso8859_2',
+    'latin2'             : 'iso8859_2',
+
+    # iso8859_3 codec
+    'csisolatin3'        : 'iso8859_3',
+    'iso_8859_3'         : 'iso8859_3',
+    'iso_8859_3_1988'    : 'iso8859_3',
+    'iso_ir_109'         : 'iso8859_3',
+    'l3'                 : 'iso8859_3',
+    'latin3'             : 'iso8859_3',
+
+    # iso8859_4 codec
+    'csisolatin4'        : 'iso8859_4',
+    'iso_8859_4'         : 'iso8859_4',
+    'iso_8859_4_1988'    : 'iso8859_4',
+    'iso_ir_110'         : 'iso8859_4',
+    'l4'                 : 'iso8859_4',
+    'latin4'             : 'iso8859_4',
+
+    # iso8859_5 codec
+    'csisolatincyrillic' : 'iso8859_5',
+    'cyrillic'           : 'iso8859_5',
+    'iso_8859_5'         : 'iso8859_5',
+    'iso_8859_5_1988'    : 'iso8859_5',
+    'iso_ir_144'         : 'iso8859_5',
+
+    # iso8859_6 codec
+    'arabic'             : 'iso8859_6',
+    'asmo_708'           : 'iso8859_6',
+    'csisolatinarabic'   : 'iso8859_6',
+    'ecma_114'           : 'iso8859_6',
+    'iso_8859_6'         : 'iso8859_6',
+    'iso_8859_6_1987'    : 'iso8859_6',
+    'iso_ir_127'         : 'iso8859_6',
+
+    # iso8859_7 codec
+    'csisolatingreek'    : 'iso8859_7',
+    'ecma_118'           : 'iso8859_7',
+    'elot_928'           : 'iso8859_7',
+    'greek'              : 'iso8859_7',
+    'greek8'             : 'iso8859_7',
+    'iso_8859_7'         : 'iso8859_7',
+    'iso_8859_7_1987'    : 'iso8859_7',
+    'iso_ir_126'         : 'iso8859_7',
+
+    # iso8859_8 codec
+    'csisolatinhebrew'   : 'iso8859_8',
+    'hebrew'             : 'iso8859_8',
+    'iso_8859_8'         : 'iso8859_8',
+    'iso_8859_8_1988'    : 'iso8859_8',
+    'iso_ir_138'         : 'iso8859_8',
+    'iso_8859_8_i'       : 'iso8859_8',
+    'iso_8859_8_e'       : 'iso8859_8',
+
+    # iso8859_9 codec
+    'csisolatin5'        : 'iso8859_9',
+    'iso_8859_9'         : 'iso8859_9',
+    'iso_8859_9_1989'    : 'iso8859_9',
+    'iso_ir_148'         : 'iso8859_9',
+    'l5'                 : 'iso8859_9',
+    'latin5'             : 'iso8859_9',
+
+    # johab codec
+    'cp1361'             : 'johab',
+    'ms1361'             : 'johab',
+
+    # koi8_r codec
+    'cskoi8r'            : 'koi8_r',
+
+    # kz1048 codec
+    'kz_1048'           : 'kz1048',
+    'rk1048'            : 'kz1048',
+    'strk1048_2002'     : 'kz1048',
+
+    # latin_1 codec
+    #
+    # Note that the latin_1 codec is implemented internally in C and a
+    # lot faster than the charmap codec iso8859_1 which uses the same
+    # encoding. This is why we discourage the use of the iso8859_1
+    # codec and alias it to latin_1 instead.
+    #
+    '8859'               : 'latin_1',
+    'cp819'              : 'latin_1',
+    'csisolatin1'        : 'latin_1',
+    'ibm819'             : 'latin_1',
+    'iso8859'            : 'latin_1',
+    'iso8859_1'          : 'latin_1',
+    'iso_8859_1'         : 'latin_1',
+    'iso_8859_1_1987'    : 'latin_1',
+    'iso_ir_100'         : 'latin_1',
+    'l1'                 : 'latin_1',
+    'latin'              : 'latin_1',
+    'latin1'             : 'latin_1',
+
+    # mac_cyrillic codec
+    'maccyrillic'        : 'mac_cyrillic',
+
+    # mac_greek codec
+    'macgreek'           : 'mac_greek',
+
+    # mac_iceland codec
+    'maciceland'         : 'mac_iceland',
+
+    # mac_latin2 codec
+    'maccentraleurope'   : 'mac_latin2',
+    'mac_centeuro'       : 'mac_latin2',
+    'maclatin2'          : 'mac_latin2',
+
+    # mac_roman codec
+    'macintosh'          : 'mac_roman',
+    'macroman'           : 'mac_roman',
+
+    # mac_turkish codec
+    'macturkish'         : 'mac_turkish',
+
+    # mbcs codec
+    'ansi'               : 'mbcs',
+    'dbcs'               : 'mbcs',
+
+    # ptcp154 codec
+    'csptcp154'          : 'ptcp154',
+    'pt154'              : 'ptcp154',
+    'cp154'              : 'ptcp154',
+    'cyrillic_asian'     : 'ptcp154',
+
+    # quopri_codec codec
+    'quopri'             : 'quopri_codec',
+    'quoted_printable'   : 'quopri_codec',
+    'quotedprintable'    : 'quopri_codec',
+
+    # rot_13 codec
+    'rot13'              : 'rot_13',
+
+    # shift_jis codec
+    'csshiftjis'         : 'shift_jis',
+    'shiftjis'           : 'shift_jis',
+    'sjis'               : 'shift_jis',
+    's_jis'              : 'shift_jis',
+
+    # shift_jis_2004 codec
+    'shiftjis2004'       : 'shift_jis_2004',
+    'sjis_2004'          : 'shift_jis_2004',
+    's_jis_2004'         : 'shift_jis_2004',
+
+    # shift_jisx0213 codec
+    'shiftjisx0213'      : 'shift_jisx0213',
+    'sjisx0213'          : 'shift_jisx0213',
+    's_jisx0213'         : 'shift_jisx0213',
+
+    # tis_620 codec
+    'tis620'             : 'tis_620',
+    'tis_620_0'          : 'tis_620',
+    'tis_620_2529_0'     : 'tis_620',
+    'tis_620_2529_1'     : 'tis_620',
+    'iso_ir_166'         : 'tis_620',
+
+    # utf_16 codec
+    'u16'                : 'utf_16',
+    'utf16'              : 'utf_16',
+
+    # utf_16_be codec
+    'unicodebigunmarked' : 'utf_16_be',
+    'utf_16be'           : 'utf_16_be',
+
+    # utf_16_le codec
+    'unicodelittleunmarked' : 'utf_16_le',
+    'utf_16le'           : 'utf_16_le',
+
+    # utf_32 codec
+    'u32'                : 'utf_32',
+    'utf32'              : 'utf_32',
+
+    # utf_32_be codec
+    'utf_32be'           : 'utf_32_be',
+
+    # utf_32_le codec
+    'utf_32le'           : 'utf_32_le',
+
+    # utf_7 codec
+    'u7'                 : 'utf_7',
+    'utf7'               : 'utf_7',
+    'unicode_1_1_utf_7'  : 'utf_7',
+
+    # utf_8 codec
+    'u8'                 : 'utf_8',
+    'utf'                : 'utf_8',
+    'utf8'               : 'utf_8',
+    'utf8_ucs2'          : 'utf_8',
+    'utf8_ucs4'          : 'utf_8',
+    'cp65001'            : 'utf_8',
+
+    # uu_codec codec
+    'uu'                 : 'uu_codec',
+
+    # zlib_codec codec
+    'zip'                : 'zlib_codec',
+    'zlib'               : 'zlib_codec',
+
+    # temporary mac CJK aliases, will be replaced by proper codecs in 3.1
+    'x_mac_japanese'      : 'shift_jis',
+    'x_mac_korean'        : 'euc_kr',
+    'x_mac_simp_chinese'  : 'gb2312',
+    'x_mac_trad_chinese'  : 'big5',
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ascii.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ascii.py
new file mode 100644
index 0000000000000000000000000000000000000000..2033cde97484a9ba86f9008dabd15ac846c663ee
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ascii.py
@@ -0,0 +1,50 @@
+""" Python 'ascii' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    # Note: Binding these as C functions will result in the class not
+    # converting them to methods. This is intended.
+    encode = codecs.ascii_encode
+    decode = codecs.ascii_decode
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.ascii_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.ascii_decode(input, self.errors)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+class StreamConverter(StreamWriter,StreamReader):
+
+    encode = codecs.ascii_decode
+    decode = codecs.ascii_encode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='ascii',
+        encode=Codec.encode,
+        decode=Codec.decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/base64_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/base64_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..8e7703b3b6072d644f9ea000b1a2737f990d6f95
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/base64_codec.py
@@ -0,0 +1,55 @@
+"""Python 'base64_codec' Codec - base64 content transfer encoding.
+
+This codec de/encodes from bytes to bytes.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+"""
+
+import codecs
+import base64
+
+### Codec APIs
+
+def base64_encode(input, errors='strict'):
+    assert errors == 'strict'
+    return (base64.encodebytes(input), len(input))
+
+def base64_decode(input, errors='strict'):
+    assert errors == 'strict'
+    return (base64.decodebytes(input), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return base64_encode(input, errors)
+    def decode(self, input, errors='strict'):
+        return base64_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        assert self.errors == 'strict'
+        return base64.encodebytes(input)
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        assert self.errors == 'strict'
+        return base64.decodebytes(input)
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='base64',
+        encode=base64_encode,
+        decode=base64_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5.py
new file mode 100644
index 0000000000000000000000000000000000000000..7adeb0e1605274414014ee7849c36b203f7589f7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5.py
@@ -0,0 +1,39 @@
+#
+# big5.py: Python Unicode Codec for BIG5
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_tw, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_tw.getcodec('big5')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='big5',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5hkscs.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5hkscs.py
new file mode 100644
index 0000000000000000000000000000000000000000..350df37baaedafcd75120723bf8e9b85a7e2a4b8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/big5hkscs.py
@@ -0,0 +1,39 @@
+#
+# big5hkscs.py: Python Unicode Codec for BIG5HKSCS
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_hk, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_hk.getcodec('big5hkscs')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='big5hkscs',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/bz2_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/bz2_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..fd9495e341baee1437dad343f537938f71066efd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/bz2_codec.py
@@ -0,0 +1,78 @@
+"""Python 'bz2_codec' Codec - bz2 compression encoding.
+
+This codec de/encodes from bytes to bytes and is therefore usable with
+bytes.transform() and bytes.untransform().
+
+Adapted by Raymond Hettinger from zlib_codec.py which was written
+by Marc-Andre Lemburg (mal@lemburg.com).
+"""
+
+import codecs
+import bz2 # this codec needs the optional bz2 module !
+
+### Codec APIs
+
+def bz2_encode(input, errors='strict'):
+    assert errors == 'strict'
+    return (bz2.compress(input), len(input))
+
+def bz2_decode(input, errors='strict'):
+    assert errors == 'strict'
+    return (bz2.decompress(input), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return bz2_encode(input, errors)
+    def decode(self, input, errors='strict'):
+        return bz2_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict'):
+        assert errors == 'strict'
+        self.errors = errors
+        self.compressobj = bz2.BZ2Compressor()
+
+    def encode(self, input, final=False):
+        if final:
+            c = self.compressobj.compress(input)
+            return c + self.compressobj.flush()
+        else:
+            return self.compressobj.compress(input)
+
+    def reset(self):
+        self.compressobj = bz2.BZ2Compressor()
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def __init__(self, errors='strict'):
+        assert errors == 'strict'
+        self.errors = errors
+        self.decompressobj = bz2.BZ2Decompressor()
+
+    def decode(self, input, final=False):
+        try:
+            return self.decompressobj.decompress(input)
+        except EOFError:
+            return ''
+
+    def reset(self):
+        self.decompressobj = bz2.BZ2Decompressor()
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name="bz2",
+        encode=bz2_encode,
+        decode=bz2_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/charmap.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/charmap.py
new file mode 100644
index 0000000000000000000000000000000000000000..81189b161a64ad2edbe9172597d848e64b28b28c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/charmap.py
@@ -0,0 +1,69 @@
+""" Generic Python Character Mapping Codec.
+
+    Use this codec directly rather than through the automatic
+    conversion mechanisms supplied by unicode() and .encode().
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    # Note: Binding these as C functions will result in the class not
+    # converting them to methods. This is intended.
+    encode = codecs.charmap_encode
+    decode = codecs.charmap_decode
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict', mapping=None):
+        codecs.IncrementalEncoder.__init__(self, errors)
+        self.mapping = mapping
+
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input, self.errors, self.mapping)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def __init__(self, errors='strict', mapping=None):
+        codecs.IncrementalDecoder.__init__(self, errors)
+        self.mapping = mapping
+
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input, self.errors, self.mapping)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+
+    def __init__(self,stream,errors='strict',mapping=None):
+        codecs.StreamWriter.__init__(self,stream,errors)
+        self.mapping = mapping
+
+    def encode(self,input,errors='strict'):
+        return Codec.encode(input,errors,self.mapping)
+
+class StreamReader(Codec,codecs.StreamReader):
+
+    def __init__(self,stream,errors='strict',mapping=None):
+        codecs.StreamReader.__init__(self,stream,errors)
+        self.mapping = mapping
+
+    def decode(self,input,errors='strict'):
+        return Codec.decode(input,errors,self.mapping)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='charmap',
+        encode=Codec.encode,
+        decode=Codec.decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp037.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp037.py
new file mode 100644
index 0000000000000000000000000000000000000000..4edd708f3d7501be4c93fb4d5c2e1c608e1093cf
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp037.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp037 generated from 'MAPPINGS/VENDORS/MICSFT/EBCDIC/CP037.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp037',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> CONTROL
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> CONTROL
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> CONTROL
+    '\x8d'     #  0x09 -> CONTROL
+    '\x8e'     #  0x0A -> CONTROL
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> CONTROL
+    '\x85'     #  0x15 -> CONTROL
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> CONTROL
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> CONTROL
+    '\x8f'     #  0x1B -> CONTROL
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> CONTROL
+    '\x81'     #  0x21 -> CONTROL
+    '\x82'     #  0x22 -> CONTROL
+    '\x83'     #  0x23 -> CONTROL
+    '\x84'     #  0x24 -> CONTROL
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> CONTROL
+    '\x89'     #  0x29 -> CONTROL
+    '\x8a'     #  0x2A -> CONTROL
+    '\x8b'     #  0x2B -> CONTROL
+    '\x8c'     #  0x2C -> CONTROL
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> CONTROL
+    '\x91'     #  0x31 -> CONTROL
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> CONTROL
+    '\x94'     #  0x34 -> CONTROL
+    '\x95'     #  0x35 -> CONTROL
+    '\x96'     #  0x36 -> CONTROL
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> CONTROL
+    '\x99'     #  0x39 -> CONTROL
+    '\x9a'     #  0x3A -> CONTROL
+    '\x9b'     #  0x3B -> CONTROL
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> CONTROL
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\xa0'     #  0x41 -> NO-BREAK SPACE
+    '\xe2'     #  0x42 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x43 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x44 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0x45 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe3'     #  0x46 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x47 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x48 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xf1'     #  0x49 -> LATIN SMALL LETTER N WITH TILDE
+    '\xa2'     #  0x4A -> CENT SIGN
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '|'        #  0x4F -> VERTICAL LINE
+    '&'        #  0x50 -> AMPERSAND
+    '\xe9'     #  0x51 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0x52 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x53 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x54 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xed'     #  0x55 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0x56 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x57 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xec'     #  0x58 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xdf'     #  0x59 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '!'        #  0x5A -> EXCLAMATION MARK
+    '$'        #  0x5B -> DOLLAR SIGN
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '\xac'     #  0x5F -> NOT SIGN
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\xc2'     #  0x62 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc4'     #  0x63 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc0'     #  0x64 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0x65 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'     #  0x66 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc5'     #  0x67 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x68 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xd1'     #  0x69 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xa6'     #  0x6A -> BROKEN BAR
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\xf8'     #  0x70 -> LATIN SMALL LETTER O WITH STROKE
+    '\xc9'     #  0x71 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0x72 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x73 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x74 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0x75 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x76 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x77 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0x78 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '`'        #  0x79 -> GRAVE ACCENT
+    ':'        #  0x7A -> COLON
+    '#'        #  0x7B -> NUMBER SIGN
+    '@'        #  0x7C -> COMMERCIAL AT
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '"'        #  0x7F -> QUOTATION MARK
+    '\xd8'     #  0x80 -> LATIN CAPITAL LETTER O WITH STROKE
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\xab'     #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xf0'     #  0x8C -> LATIN SMALL LETTER ETH (ICELANDIC)
+    '\xfd'     #  0x8D -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0x8E -> LATIN SMALL LETTER THORN (ICELANDIC)
+    '\xb1'     #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\xaa'     #  0x9A -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x9B -> MASCULINE ORDINAL INDICATOR
+    '\xe6'     #  0x9C -> LATIN SMALL LIGATURE AE
+    '\xb8'     #  0x9D -> CEDILLA
+    '\xc6'     #  0x9E -> LATIN CAPITAL LIGATURE AE
+    '\xa4'     #  0x9F -> CURRENCY SIGN
+    '\xb5'     #  0xA0 -> MICRO SIGN
+    '~'        #  0xA1 -> TILDE
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\xa1'     #  0xAA -> INVERTED EXCLAMATION MARK
+    '\xbf'     #  0xAB -> INVERTED QUESTION MARK
+    '\xd0'     #  0xAC -> LATIN CAPITAL LETTER ETH (ICELANDIC)
+    '\xdd'     #  0xAD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xAE -> LATIN CAPITAL LETTER THORN (ICELANDIC)
+    '\xae'     #  0xAF -> REGISTERED SIGN
+    '^'        #  0xB0 -> CIRCUMFLEX ACCENT
+    '\xa3'     #  0xB1 -> POUND SIGN
+    '\xa5'     #  0xB2 -> YEN SIGN
+    '\xb7'     #  0xB3 -> MIDDLE DOT
+    '\xa9'     #  0xB4 -> COPYRIGHT SIGN
+    '\xa7'     #  0xB5 -> SECTION SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xbc'     #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '['        #  0xBA -> LEFT SQUARE BRACKET
+    ']'        #  0xBB -> RIGHT SQUARE BRACKET
+    '\xaf'     #  0xBC -> MACRON
+    '\xa8'     #  0xBD -> DIAERESIS
+    '\xb4'     #  0xBE -> ACUTE ACCENT
+    '\xd7'     #  0xBF -> MULTIPLICATION SIGN
+    '{'        #  0xC0 -> LEFT CURLY BRACKET
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\xf4'     #  0xCB -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0xCC -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0xCD -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xCE -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf5'     #  0xCF -> LATIN SMALL LETTER O WITH TILDE
+    '}'        #  0xD0 -> RIGHT CURLY BRACKET
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'     #  0xDA -> SUPERSCRIPT ONE
+    '\xfb'     #  0xDB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xDC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xf9'     #  0xDD -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xDE -> LATIN SMALL LETTER U WITH ACUTE
+    '\xff'     #  0xDF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\\'       #  0xE0 -> REVERSE SOLIDUS
+    '\xf7'     #  0xE1 -> DIVISION SIGN
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\xd4'     #  0xEB -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd6'     #  0xEC -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd2'     #  0xED -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd5'     #  0xEF -> LATIN CAPITAL LETTER O WITH TILDE
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\xdb'     #  0xFB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xFC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xd9'     #  0xFD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xFE -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\x9f'     #  0xFF -> CONTROL
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1006.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1006.py
new file mode 100644
index 0000000000000000000000000000000000000000..a1221c3ef1ce52c3e45c556e148f2484b5c5f761
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1006.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1006 generated from 'MAPPINGS/VENDORS/MISC/CP1006.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1006',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u06f0'   #  0xA1 -> EXTENDED ARABIC-INDIC DIGIT ZERO
+    '\u06f1'   #  0xA2 -> EXTENDED ARABIC-INDIC DIGIT ONE
+    '\u06f2'   #  0xA3 -> EXTENDED ARABIC-INDIC DIGIT TWO
+    '\u06f3'   #  0xA4 -> EXTENDED ARABIC-INDIC DIGIT THREE
+    '\u06f4'   #  0xA5 -> EXTENDED ARABIC-INDIC DIGIT FOUR
+    '\u06f5'   #  0xA6 -> EXTENDED ARABIC-INDIC DIGIT FIVE
+    '\u06f6'   #  0xA7 -> EXTENDED ARABIC-INDIC DIGIT SIX
+    '\u06f7'   #  0xA8 -> EXTENDED ARABIC-INDIC DIGIT SEVEN
+    '\u06f8'   #  0xA9 -> EXTENDED ARABIC-INDIC DIGIT EIGHT
+    '\u06f9'   #  0xAA -> EXTENDED ARABIC-INDIC DIGIT NINE
+    '\u060c'   #  0xAB -> ARABIC COMMA
+    '\u061b'   #  0xAC -> ARABIC SEMICOLON
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u061f'   #  0xAE -> ARABIC QUESTION MARK
+    '\ufe81'   #  0xAF -> ARABIC LETTER ALEF WITH MADDA ABOVE ISOLATED FORM
+    '\ufe8d'   #  0xB0 -> ARABIC LETTER ALEF ISOLATED FORM
+    '\ufe8e'   #  0xB1 -> ARABIC LETTER ALEF FINAL FORM
+    '\ufe8e'   #  0xB2 -> ARABIC LETTER ALEF FINAL FORM
+    '\ufe8f'   #  0xB3 -> ARABIC LETTER BEH ISOLATED FORM
+    '\ufe91'   #  0xB4 -> ARABIC LETTER BEH INITIAL FORM
+    '\ufb56'   #  0xB5 -> ARABIC LETTER PEH ISOLATED FORM
+    '\ufb58'   #  0xB6 -> ARABIC LETTER PEH INITIAL FORM
+    '\ufe93'   #  0xB7 -> ARABIC LETTER TEH MARBUTA ISOLATED FORM
+    '\ufe95'   #  0xB8 -> ARABIC LETTER TEH ISOLATED FORM
+    '\ufe97'   #  0xB9 -> ARABIC LETTER TEH INITIAL FORM
+    '\ufb66'   #  0xBA -> ARABIC LETTER TTEH ISOLATED FORM
+    '\ufb68'   #  0xBB -> ARABIC LETTER TTEH INITIAL FORM
+    '\ufe99'   #  0xBC -> ARABIC LETTER THEH ISOLATED FORM
+    '\ufe9b'   #  0xBD -> ARABIC LETTER THEH INITIAL FORM
+    '\ufe9d'   #  0xBE -> ARABIC LETTER JEEM ISOLATED FORM
+    '\ufe9f'   #  0xBF -> ARABIC LETTER JEEM INITIAL FORM
+    '\ufb7a'   #  0xC0 -> ARABIC LETTER TCHEH ISOLATED FORM
+    '\ufb7c'   #  0xC1 -> ARABIC LETTER TCHEH INITIAL FORM
+    '\ufea1'   #  0xC2 -> ARABIC LETTER HAH ISOLATED FORM
+    '\ufea3'   #  0xC3 -> ARABIC LETTER HAH INITIAL FORM
+    '\ufea5'   #  0xC4 -> ARABIC LETTER KHAH ISOLATED FORM
+    '\ufea7'   #  0xC5 -> ARABIC LETTER KHAH INITIAL FORM
+    '\ufea9'   #  0xC6 -> ARABIC LETTER DAL ISOLATED FORM
+    '\ufb84'   #  0xC7 -> ARABIC LETTER DAHAL ISOLATED FORMN
+    '\ufeab'   #  0xC8 -> ARABIC LETTER THAL ISOLATED FORM
+    '\ufead'   #  0xC9 -> ARABIC LETTER REH ISOLATED FORM
+    '\ufb8c'   #  0xCA -> ARABIC LETTER RREH ISOLATED FORM
+    '\ufeaf'   #  0xCB -> ARABIC LETTER ZAIN ISOLATED FORM
+    '\ufb8a'   #  0xCC -> ARABIC LETTER JEH ISOLATED FORM
+    '\ufeb1'   #  0xCD -> ARABIC LETTER SEEN ISOLATED FORM
+    '\ufeb3'   #  0xCE -> ARABIC LETTER SEEN INITIAL FORM
+    '\ufeb5'   #  0xCF -> ARABIC LETTER SHEEN ISOLATED FORM
+    '\ufeb7'   #  0xD0 -> ARABIC LETTER SHEEN INITIAL FORM
+    '\ufeb9'   #  0xD1 -> ARABIC LETTER SAD ISOLATED FORM
+    '\ufebb'   #  0xD2 -> ARABIC LETTER SAD INITIAL FORM
+    '\ufebd'   #  0xD3 -> ARABIC LETTER DAD ISOLATED FORM
+    '\ufebf'   #  0xD4 -> ARABIC LETTER DAD INITIAL FORM
+    '\ufec1'   #  0xD5 -> ARABIC LETTER TAH ISOLATED FORM
+    '\ufec5'   #  0xD6 -> ARABIC LETTER ZAH ISOLATED FORM
+    '\ufec9'   #  0xD7 -> ARABIC LETTER AIN ISOLATED FORM
+    '\ufeca'   #  0xD8 -> ARABIC LETTER AIN FINAL FORM
+    '\ufecb'   #  0xD9 -> ARABIC LETTER AIN INITIAL FORM
+    '\ufecc'   #  0xDA -> ARABIC LETTER AIN MEDIAL FORM
+    '\ufecd'   #  0xDB -> ARABIC LETTER GHAIN ISOLATED FORM
+    '\ufece'   #  0xDC -> ARABIC LETTER GHAIN FINAL FORM
+    '\ufecf'   #  0xDD -> ARABIC LETTER GHAIN INITIAL FORM
+    '\ufed0'   #  0xDE -> ARABIC LETTER GHAIN MEDIAL FORM
+    '\ufed1'   #  0xDF -> ARABIC LETTER FEH ISOLATED FORM
+    '\ufed3'   #  0xE0 -> ARABIC LETTER FEH INITIAL FORM
+    '\ufed5'   #  0xE1 -> ARABIC LETTER QAF ISOLATED FORM
+    '\ufed7'   #  0xE2 -> ARABIC LETTER QAF INITIAL FORM
+    '\ufed9'   #  0xE3 -> ARABIC LETTER KAF ISOLATED FORM
+    '\ufedb'   #  0xE4 -> ARABIC LETTER KAF INITIAL FORM
+    '\ufb92'   #  0xE5 -> ARABIC LETTER GAF ISOLATED FORM
+    '\ufb94'   #  0xE6 -> ARABIC LETTER GAF INITIAL FORM
+    '\ufedd'   #  0xE7 -> ARABIC LETTER LAM ISOLATED FORM
+    '\ufedf'   #  0xE8 -> ARABIC LETTER LAM INITIAL FORM
+    '\ufee0'   #  0xE9 -> ARABIC LETTER LAM MEDIAL FORM
+    '\ufee1'   #  0xEA -> ARABIC LETTER MEEM ISOLATED FORM
+    '\ufee3'   #  0xEB -> ARABIC LETTER MEEM INITIAL FORM
+    '\ufb9e'   #  0xEC -> ARABIC LETTER NOON GHUNNA ISOLATED FORM
+    '\ufee5'   #  0xED -> ARABIC LETTER NOON ISOLATED FORM
+    '\ufee7'   #  0xEE -> ARABIC LETTER NOON INITIAL FORM
+    '\ufe85'   #  0xEF -> ARABIC LETTER WAW WITH HAMZA ABOVE ISOLATED FORM
+    '\ufeed'   #  0xF0 -> ARABIC LETTER WAW ISOLATED FORM
+    '\ufba6'   #  0xF1 -> ARABIC LETTER HEH GOAL ISOLATED FORM
+    '\ufba8'   #  0xF2 -> ARABIC LETTER HEH GOAL INITIAL FORM
+    '\ufba9'   #  0xF3 -> ARABIC LETTER HEH GOAL MEDIAL FORM
+    '\ufbaa'   #  0xF4 -> ARABIC LETTER HEH DOACHASHMEE ISOLATED FORM
+    '\ufe80'   #  0xF5 -> ARABIC LETTER HAMZA ISOLATED FORM
+    '\ufe89'   #  0xF6 -> ARABIC LETTER YEH WITH HAMZA ABOVE ISOLATED FORM
+    '\ufe8a'   #  0xF7 -> ARABIC LETTER YEH WITH HAMZA ABOVE FINAL FORM
+    '\ufe8b'   #  0xF8 -> ARABIC LETTER YEH WITH HAMZA ABOVE INITIAL FORM
+    '\ufef1'   #  0xF9 -> ARABIC LETTER YEH ISOLATED FORM
+    '\ufef2'   #  0xFA -> ARABIC LETTER YEH FINAL FORM
+    '\ufef3'   #  0xFB -> ARABIC LETTER YEH INITIAL FORM
+    '\ufbb0'   #  0xFC -> ARABIC LETTER YEH BARREE WITH HAMZA ABOVE ISOLATED FORM
+    '\ufbae'   #  0xFD -> ARABIC LETTER YEH BARREE ISOLATED FORM
+    '\ufe7c'   #  0xFE -> ARABIC SHADDA ISOLATED FORM
+    '\ufe7d'   #  0xFF -> ARABIC SHADDA MEDIAL FORM
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1026.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1026.py
new file mode 100644
index 0000000000000000000000000000000000000000..46f71f74dae2789c130dba8cd77673135dcaea2f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1026.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1026 generated from 'MAPPINGS/VENDORS/MICSFT/EBCDIC/CP1026.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1026',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> CONTROL
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> CONTROL
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> CONTROL
+    '\x8d'     #  0x09 -> CONTROL
+    '\x8e'     #  0x0A -> CONTROL
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> CONTROL
+    '\x85'     #  0x15 -> CONTROL
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> CONTROL
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> CONTROL
+    '\x8f'     #  0x1B -> CONTROL
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> CONTROL
+    '\x81'     #  0x21 -> CONTROL
+    '\x82'     #  0x22 -> CONTROL
+    '\x83'     #  0x23 -> CONTROL
+    '\x84'     #  0x24 -> CONTROL
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> CONTROL
+    '\x89'     #  0x29 -> CONTROL
+    '\x8a'     #  0x2A -> CONTROL
+    '\x8b'     #  0x2B -> CONTROL
+    '\x8c'     #  0x2C -> CONTROL
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> CONTROL
+    '\x91'     #  0x31 -> CONTROL
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> CONTROL
+    '\x94'     #  0x34 -> CONTROL
+    '\x95'     #  0x35 -> CONTROL
+    '\x96'     #  0x36 -> CONTROL
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> CONTROL
+    '\x99'     #  0x39 -> CONTROL
+    '\x9a'     #  0x3A -> CONTROL
+    '\x9b'     #  0x3B -> CONTROL
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> CONTROL
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\xa0'     #  0x41 -> NO-BREAK SPACE
+    '\xe2'     #  0x42 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x43 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x44 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0x45 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe3'     #  0x46 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x47 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '{'        #  0x48 -> LEFT CURLY BRACKET
+    '\xf1'     #  0x49 -> LATIN SMALL LETTER N WITH TILDE
+    '\xc7'     #  0x4A -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '!'        #  0x4F -> EXCLAMATION MARK
+    '&'        #  0x50 -> AMPERSAND
+    '\xe9'     #  0x51 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0x52 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x53 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x54 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xed'     #  0x55 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0x56 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x57 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xec'     #  0x58 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xdf'     #  0x59 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '\u011e'   #  0x5A -> LATIN CAPITAL LETTER G WITH BREVE
+    '\u0130'   #  0x5B -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '^'        #  0x5F -> CIRCUMFLEX ACCENT
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\xc2'     #  0x62 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc4'     #  0x63 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc0'     #  0x64 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0x65 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'     #  0x66 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc5'     #  0x67 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '['        #  0x68 -> LEFT SQUARE BRACKET
+    '\xd1'     #  0x69 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\u015f'   #  0x6A -> LATIN SMALL LETTER S WITH CEDILLA
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\xf8'     #  0x70 -> LATIN SMALL LETTER O WITH STROKE
+    '\xc9'     #  0x71 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0x72 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x73 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x74 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0x75 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x76 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x77 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0x78 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\u0131'   #  0x79 -> LATIN SMALL LETTER DOTLESS I
+    ':'        #  0x7A -> COLON
+    '\xd6'     #  0x7B -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\u015e'   #  0x7C -> LATIN CAPITAL LETTER S WITH CEDILLA
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '\xdc'     #  0x7F -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xd8'     #  0x80 -> LATIN CAPITAL LETTER O WITH STROKE
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\xab'     #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '}'        #  0x8C -> RIGHT CURLY BRACKET
+    '`'        #  0x8D -> GRAVE ACCENT
+    '\xa6'     #  0x8E -> BROKEN BAR
+    '\xb1'     #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\xaa'     #  0x9A -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x9B -> MASCULINE ORDINAL INDICATOR
+    '\xe6'     #  0x9C -> LATIN SMALL LIGATURE AE
+    '\xb8'     #  0x9D -> CEDILLA
+    '\xc6'     #  0x9E -> LATIN CAPITAL LIGATURE AE
+    '\xa4'     #  0x9F -> CURRENCY SIGN
+    '\xb5'     #  0xA0 -> MICRO SIGN
+    '\xf6'     #  0xA1 -> LATIN SMALL LETTER O WITH DIAERESIS
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\xa1'     #  0xAA -> INVERTED EXCLAMATION MARK
+    '\xbf'     #  0xAB -> INVERTED QUESTION MARK
+    ']'        #  0xAC -> RIGHT SQUARE BRACKET
+    '$'        #  0xAD -> DOLLAR SIGN
+    '@'        #  0xAE -> COMMERCIAL AT
+    '\xae'     #  0xAF -> REGISTERED SIGN
+    '\xa2'     #  0xB0 -> CENT SIGN
+    '\xa3'     #  0xB1 -> POUND SIGN
+    '\xa5'     #  0xB2 -> YEN SIGN
+    '\xb7'     #  0xB3 -> MIDDLE DOT
+    '\xa9'     #  0xB4 -> COPYRIGHT SIGN
+    '\xa7'     #  0xB5 -> SECTION SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xbc'     #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '\xac'     #  0xBA -> NOT SIGN
+    '|'        #  0xBB -> VERTICAL LINE
+    '\xaf'     #  0xBC -> MACRON
+    '\xa8'     #  0xBD -> DIAERESIS
+    '\xb4'     #  0xBE -> ACUTE ACCENT
+    '\xd7'     #  0xBF -> MULTIPLICATION SIGN
+    '\xe7'     #  0xC0 -> LATIN SMALL LETTER C WITH CEDILLA
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\xf4'     #  0xCB -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '~'        #  0xCC -> TILDE
+    '\xf2'     #  0xCD -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xCE -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf5'     #  0xCF -> LATIN SMALL LETTER O WITH TILDE
+    '\u011f'   #  0xD0 -> LATIN SMALL LETTER G WITH BREVE
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'     #  0xDA -> SUPERSCRIPT ONE
+    '\xfb'     #  0xDB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\\'       #  0xDC -> REVERSE SOLIDUS
+    '\xf9'     #  0xDD -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xDE -> LATIN SMALL LETTER U WITH ACUTE
+    '\xff'     #  0xDF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xfc'     #  0xE0 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xf7'     #  0xE1 -> DIVISION SIGN
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\xd4'     #  0xEB -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '#'        #  0xEC -> NUMBER SIGN
+    '\xd2'     #  0xED -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd5'     #  0xEF -> LATIN CAPITAL LETTER O WITH TILDE
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\xdb'     #  0xFB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '"'        #  0xFC -> QUOTATION MARK
+    '\xd9'     #  0xFD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xFE -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\x9f'     #  0xFF -> CONTROL
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1125.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1125.py
new file mode 100644
index 0000000000000000000000000000000000000000..b1fd69deb075ba011d28226777e19cb04a7d9334
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1125.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec for CP1125
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1125',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x0410,     #  CYRILLIC CAPITAL LETTER A
+    0x0081: 0x0411,     #  CYRILLIC CAPITAL LETTER BE
+    0x0082: 0x0412,     #  CYRILLIC CAPITAL LETTER VE
+    0x0083: 0x0413,     #  CYRILLIC CAPITAL LETTER GHE
+    0x0084: 0x0414,     #  CYRILLIC CAPITAL LETTER DE
+    0x0085: 0x0415,     #  CYRILLIC CAPITAL LETTER IE
+    0x0086: 0x0416,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x0087: 0x0417,     #  CYRILLIC CAPITAL LETTER ZE
+    0x0088: 0x0418,     #  CYRILLIC CAPITAL LETTER I
+    0x0089: 0x0419,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x008a: 0x041a,     #  CYRILLIC CAPITAL LETTER KA
+    0x008b: 0x041b,     #  CYRILLIC CAPITAL LETTER EL
+    0x008c: 0x041c,     #  CYRILLIC CAPITAL LETTER EM
+    0x008d: 0x041d,     #  CYRILLIC CAPITAL LETTER EN
+    0x008e: 0x041e,     #  CYRILLIC CAPITAL LETTER O
+    0x008f: 0x041f,     #  CYRILLIC CAPITAL LETTER PE
+    0x0090: 0x0420,     #  CYRILLIC CAPITAL LETTER ER
+    0x0091: 0x0421,     #  CYRILLIC CAPITAL LETTER ES
+    0x0092: 0x0422,     #  CYRILLIC CAPITAL LETTER TE
+    0x0093: 0x0423,     #  CYRILLIC CAPITAL LETTER U
+    0x0094: 0x0424,     #  CYRILLIC CAPITAL LETTER EF
+    0x0095: 0x0425,     #  CYRILLIC CAPITAL LETTER HA
+    0x0096: 0x0426,     #  CYRILLIC CAPITAL LETTER TSE
+    0x0097: 0x0427,     #  CYRILLIC CAPITAL LETTER CHE
+    0x0098: 0x0428,     #  CYRILLIC CAPITAL LETTER SHA
+    0x0099: 0x0429,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x009a: 0x042a,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x009b: 0x042b,     #  CYRILLIC CAPITAL LETTER YERU
+    0x009c: 0x042c,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x009d: 0x042d,     #  CYRILLIC CAPITAL LETTER E
+    0x009e: 0x042e,     #  CYRILLIC CAPITAL LETTER YU
+    0x009f: 0x042f,     #  CYRILLIC CAPITAL LETTER YA
+    0x00a0: 0x0430,     #  CYRILLIC SMALL LETTER A
+    0x00a1: 0x0431,     #  CYRILLIC SMALL LETTER BE
+    0x00a2: 0x0432,     #  CYRILLIC SMALL LETTER VE
+    0x00a3: 0x0433,     #  CYRILLIC SMALL LETTER GHE
+    0x00a4: 0x0434,     #  CYRILLIC SMALL LETTER DE
+    0x00a5: 0x0435,     #  CYRILLIC SMALL LETTER IE
+    0x00a6: 0x0436,     #  CYRILLIC SMALL LETTER ZHE
+    0x00a7: 0x0437,     #  CYRILLIC SMALL LETTER ZE
+    0x00a8: 0x0438,     #  CYRILLIC SMALL LETTER I
+    0x00a9: 0x0439,     #  CYRILLIC SMALL LETTER SHORT I
+    0x00aa: 0x043a,     #  CYRILLIC SMALL LETTER KA
+    0x00ab: 0x043b,     #  CYRILLIC SMALL LETTER EL
+    0x00ac: 0x043c,     #  CYRILLIC SMALL LETTER EM
+    0x00ad: 0x043d,     #  CYRILLIC SMALL LETTER EN
+    0x00ae: 0x043e,     #  CYRILLIC SMALL LETTER O
+    0x00af: 0x043f,     #  CYRILLIC SMALL LETTER PE
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x0440,     #  CYRILLIC SMALL LETTER ER
+    0x00e1: 0x0441,     #  CYRILLIC SMALL LETTER ES
+    0x00e2: 0x0442,     #  CYRILLIC SMALL LETTER TE
+    0x00e3: 0x0443,     #  CYRILLIC SMALL LETTER U
+    0x00e4: 0x0444,     #  CYRILLIC SMALL LETTER EF
+    0x00e5: 0x0445,     #  CYRILLIC SMALL LETTER HA
+    0x00e6: 0x0446,     #  CYRILLIC SMALL LETTER TSE
+    0x00e7: 0x0447,     #  CYRILLIC SMALL LETTER CHE
+    0x00e8: 0x0448,     #  CYRILLIC SMALL LETTER SHA
+    0x00e9: 0x0449,     #  CYRILLIC SMALL LETTER SHCHA
+    0x00ea: 0x044a,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x00eb: 0x044b,     #  CYRILLIC SMALL LETTER YERU
+    0x00ec: 0x044c,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x00ed: 0x044d,     #  CYRILLIC SMALL LETTER E
+    0x00ee: 0x044e,     #  CYRILLIC SMALL LETTER YU
+    0x00ef: 0x044f,     #  CYRILLIC SMALL LETTER YA
+    0x00f0: 0x0401,     #  CYRILLIC CAPITAL LETTER IO
+    0x00f1: 0x0451,     #  CYRILLIC SMALL LETTER IO
+    0x00f2: 0x0490,     #  CYRILLIC CAPITAL LETTER GHE WITH UPTURN
+    0x00f3: 0x0491,     #  CYRILLIC SMALL LETTER GHE WITH UPTURN
+    0x00f4: 0x0404,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x00f5: 0x0454,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x00f6: 0x0406,     #  CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x00f7: 0x0456,     #  CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x00f8: 0x0407,     #  CYRILLIC CAPITAL LETTER YI
+    0x00f9: 0x0457,     #  CYRILLIC SMALL LETTER YI
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x2116,     #  NUMERO SIGN
+    0x00fd: 0x00a4,     #  CURRENCY SIGN
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u0410'   #  0x0080 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0x0081 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0x0082 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0x0083 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0x0084 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0x0085 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0x0086 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0x0087 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0x0088 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0x0089 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0x008a -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0x008b -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0x008c -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0x008d -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0x008e -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0x008f -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0x0090 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0x0091 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0x0092 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0x0093 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0x0094 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0x0095 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0x0096 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0x0097 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0x0098 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0x0099 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0x009a -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0x009b -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0x009c -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0x009d -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0x009e -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0x009f -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'   #  0x00a0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0x00a1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0x00a2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0x00a3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0x00a4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0x00a5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0x00a6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0x00a7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0x00a8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0x00a9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0x00aa -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0x00ab -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0x00ac -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0x00ad -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0x00ae -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0x00af -> CYRILLIC SMALL LETTER PE
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u0440'   #  0x00e0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0x00e1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0x00e2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0x00e3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0x00e4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0x00e5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0x00e6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0x00e7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0x00e8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0x00e9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0x00ea -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0x00eb -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0x00ec -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0x00ed -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0x00ee -> CYRILLIC SMALL LETTER YU
+    '\u044f'   #  0x00ef -> CYRILLIC SMALL LETTER YA
+    '\u0401'   #  0x00f0 -> CYRILLIC CAPITAL LETTER IO
+    '\u0451'   #  0x00f1 -> CYRILLIC SMALL LETTER IO
+    '\u0490'   #  0x00f2 -> CYRILLIC CAPITAL LETTER GHE WITH UPTURN
+    '\u0491'   #  0x00f3 -> CYRILLIC SMALL LETTER GHE WITH UPTURN
+    '\u0404'   #  0x00f4 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u0454'   #  0x00f5 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u0406'   #  0x00f6 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0456'   #  0x00f7 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0407'   #  0x00f8 -> CYRILLIC CAPITAL LETTER YI
+    '\u0457'   #  0x00f9 -> CYRILLIC SMALL LETTER YI
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u2116'   #  0x00fc -> NUMERO SIGN
+    '\xa4'     #  0x00fd -> CURRENCY SIGN
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a4: 0x00fd,     #  CURRENCY SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x0401: 0x00f0,     #  CYRILLIC CAPITAL LETTER IO
+    0x0404: 0x00f4,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x0406: 0x00f6,     #  CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x0407: 0x00f8,     #  CYRILLIC CAPITAL LETTER YI
+    0x0410: 0x0080,     #  CYRILLIC CAPITAL LETTER A
+    0x0411: 0x0081,     #  CYRILLIC CAPITAL LETTER BE
+    0x0412: 0x0082,     #  CYRILLIC CAPITAL LETTER VE
+    0x0413: 0x0083,     #  CYRILLIC CAPITAL LETTER GHE
+    0x0414: 0x0084,     #  CYRILLIC CAPITAL LETTER DE
+    0x0415: 0x0085,     #  CYRILLIC CAPITAL LETTER IE
+    0x0416: 0x0086,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x0417: 0x0087,     #  CYRILLIC CAPITAL LETTER ZE
+    0x0418: 0x0088,     #  CYRILLIC CAPITAL LETTER I
+    0x0419: 0x0089,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x041a: 0x008a,     #  CYRILLIC CAPITAL LETTER KA
+    0x041b: 0x008b,     #  CYRILLIC CAPITAL LETTER EL
+    0x041c: 0x008c,     #  CYRILLIC CAPITAL LETTER EM
+    0x041d: 0x008d,     #  CYRILLIC CAPITAL LETTER EN
+    0x041e: 0x008e,     #  CYRILLIC CAPITAL LETTER O
+    0x041f: 0x008f,     #  CYRILLIC CAPITAL LETTER PE
+    0x0420: 0x0090,     #  CYRILLIC CAPITAL LETTER ER
+    0x0421: 0x0091,     #  CYRILLIC CAPITAL LETTER ES
+    0x0422: 0x0092,     #  CYRILLIC CAPITAL LETTER TE
+    0x0423: 0x0093,     #  CYRILLIC CAPITAL LETTER U
+    0x0424: 0x0094,     #  CYRILLIC CAPITAL LETTER EF
+    0x0425: 0x0095,     #  CYRILLIC CAPITAL LETTER HA
+    0x0426: 0x0096,     #  CYRILLIC CAPITAL LETTER TSE
+    0x0427: 0x0097,     #  CYRILLIC CAPITAL LETTER CHE
+    0x0428: 0x0098,     #  CYRILLIC CAPITAL LETTER SHA
+    0x0429: 0x0099,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x042a: 0x009a,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x042b: 0x009b,     #  CYRILLIC CAPITAL LETTER YERU
+    0x042c: 0x009c,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x042d: 0x009d,     #  CYRILLIC CAPITAL LETTER E
+    0x042e: 0x009e,     #  CYRILLIC CAPITAL LETTER YU
+    0x042f: 0x009f,     #  CYRILLIC CAPITAL LETTER YA
+    0x0430: 0x00a0,     #  CYRILLIC SMALL LETTER A
+    0x0431: 0x00a1,     #  CYRILLIC SMALL LETTER BE
+    0x0432: 0x00a2,     #  CYRILLIC SMALL LETTER VE
+    0x0433: 0x00a3,     #  CYRILLIC SMALL LETTER GHE
+    0x0434: 0x00a4,     #  CYRILLIC SMALL LETTER DE
+    0x0435: 0x00a5,     #  CYRILLIC SMALL LETTER IE
+    0x0436: 0x00a6,     #  CYRILLIC SMALL LETTER ZHE
+    0x0437: 0x00a7,     #  CYRILLIC SMALL LETTER ZE
+    0x0438: 0x00a8,     #  CYRILLIC SMALL LETTER I
+    0x0439: 0x00a9,     #  CYRILLIC SMALL LETTER SHORT I
+    0x043a: 0x00aa,     #  CYRILLIC SMALL LETTER KA
+    0x043b: 0x00ab,     #  CYRILLIC SMALL LETTER EL
+    0x043c: 0x00ac,     #  CYRILLIC SMALL LETTER EM
+    0x043d: 0x00ad,     #  CYRILLIC SMALL LETTER EN
+    0x043e: 0x00ae,     #  CYRILLIC SMALL LETTER O
+    0x043f: 0x00af,     #  CYRILLIC SMALL LETTER PE
+    0x0440: 0x00e0,     #  CYRILLIC SMALL LETTER ER
+    0x0441: 0x00e1,     #  CYRILLIC SMALL LETTER ES
+    0x0442: 0x00e2,     #  CYRILLIC SMALL LETTER TE
+    0x0443: 0x00e3,     #  CYRILLIC SMALL LETTER U
+    0x0444: 0x00e4,     #  CYRILLIC SMALL LETTER EF
+    0x0445: 0x00e5,     #  CYRILLIC SMALL LETTER HA
+    0x0446: 0x00e6,     #  CYRILLIC SMALL LETTER TSE
+    0x0447: 0x00e7,     #  CYRILLIC SMALL LETTER CHE
+    0x0448: 0x00e8,     #  CYRILLIC SMALL LETTER SHA
+    0x0449: 0x00e9,     #  CYRILLIC SMALL LETTER SHCHA
+    0x044a: 0x00ea,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x044b: 0x00eb,     #  CYRILLIC SMALL LETTER YERU
+    0x044c: 0x00ec,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x044d: 0x00ed,     #  CYRILLIC SMALL LETTER E
+    0x044e: 0x00ee,     #  CYRILLIC SMALL LETTER YU
+    0x044f: 0x00ef,     #  CYRILLIC SMALL LETTER YA
+    0x0451: 0x00f1,     #  CYRILLIC SMALL LETTER IO
+    0x0454: 0x00f5,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x0456: 0x00f7,     #  CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x0457: 0x00f9,     #  CYRILLIC SMALL LETTER YI
+    0x0490: 0x00f2,     #  CYRILLIC CAPITAL LETTER GHE WITH UPTURN
+    0x0491: 0x00f3,     #  CYRILLIC SMALL LETTER GHE WITH UPTURN
+    0x2116: 0x00fc,     #  NUMERO SIGN
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1140.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1140.py
new file mode 100644
index 0000000000000000000000000000000000000000..0a919d837e1d4e80380f0e7bc1b91d537b5eec8d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1140.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1140 generated from 'python-mappings/CP1140.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1140',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> CONTROL
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> CONTROL
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> CONTROL
+    '\x8d'     #  0x09 -> CONTROL
+    '\x8e'     #  0x0A -> CONTROL
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> CONTROL
+    '\x85'     #  0x15 -> CONTROL
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> CONTROL
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> CONTROL
+    '\x8f'     #  0x1B -> CONTROL
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> CONTROL
+    '\x81'     #  0x21 -> CONTROL
+    '\x82'     #  0x22 -> CONTROL
+    '\x83'     #  0x23 -> CONTROL
+    '\x84'     #  0x24 -> CONTROL
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> CONTROL
+    '\x89'     #  0x29 -> CONTROL
+    '\x8a'     #  0x2A -> CONTROL
+    '\x8b'     #  0x2B -> CONTROL
+    '\x8c'     #  0x2C -> CONTROL
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> CONTROL
+    '\x91'     #  0x31 -> CONTROL
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> CONTROL
+    '\x94'     #  0x34 -> CONTROL
+    '\x95'     #  0x35 -> CONTROL
+    '\x96'     #  0x36 -> CONTROL
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> CONTROL
+    '\x99'     #  0x39 -> CONTROL
+    '\x9a'     #  0x3A -> CONTROL
+    '\x9b'     #  0x3B -> CONTROL
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> CONTROL
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\xa0'     #  0x41 -> NO-BREAK SPACE
+    '\xe2'     #  0x42 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x43 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x44 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0x45 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe3'     #  0x46 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x47 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x48 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xf1'     #  0x49 -> LATIN SMALL LETTER N WITH TILDE
+    '\xa2'     #  0x4A -> CENT SIGN
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '|'        #  0x4F -> VERTICAL LINE
+    '&'        #  0x50 -> AMPERSAND
+    '\xe9'     #  0x51 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0x52 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x53 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x54 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xed'     #  0x55 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0x56 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x57 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xec'     #  0x58 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xdf'     #  0x59 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '!'        #  0x5A -> EXCLAMATION MARK
+    '$'        #  0x5B -> DOLLAR SIGN
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '\xac'     #  0x5F -> NOT SIGN
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\xc2'     #  0x62 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc4'     #  0x63 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc0'     #  0x64 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0x65 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'     #  0x66 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc5'     #  0x67 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x68 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xd1'     #  0x69 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xa6'     #  0x6A -> BROKEN BAR
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\xf8'     #  0x70 -> LATIN SMALL LETTER O WITH STROKE
+    '\xc9'     #  0x71 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0x72 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x73 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x74 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0x75 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x76 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x77 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0x78 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '`'        #  0x79 -> GRAVE ACCENT
+    ':'        #  0x7A -> COLON
+    '#'        #  0x7B -> NUMBER SIGN
+    '@'        #  0x7C -> COMMERCIAL AT
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '"'        #  0x7F -> QUOTATION MARK
+    '\xd8'     #  0x80 -> LATIN CAPITAL LETTER O WITH STROKE
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\xab'     #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xf0'     #  0x8C -> LATIN SMALL LETTER ETH (ICELANDIC)
+    '\xfd'     #  0x8D -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0x8E -> LATIN SMALL LETTER THORN (ICELANDIC)
+    '\xb1'     #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\xaa'     #  0x9A -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x9B -> MASCULINE ORDINAL INDICATOR
+    '\xe6'     #  0x9C -> LATIN SMALL LIGATURE AE
+    '\xb8'     #  0x9D -> CEDILLA
+    '\xc6'     #  0x9E -> LATIN CAPITAL LIGATURE AE
+    '\u20ac'   #  0x9F -> EURO SIGN
+    '\xb5'     #  0xA0 -> MICRO SIGN
+    '~'        #  0xA1 -> TILDE
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\xa1'     #  0xAA -> INVERTED EXCLAMATION MARK
+    '\xbf'     #  0xAB -> INVERTED QUESTION MARK
+    '\xd0'     #  0xAC -> LATIN CAPITAL LETTER ETH (ICELANDIC)
+    '\xdd'     #  0xAD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xAE -> LATIN CAPITAL LETTER THORN (ICELANDIC)
+    '\xae'     #  0xAF -> REGISTERED SIGN
+    '^'        #  0xB0 -> CIRCUMFLEX ACCENT
+    '\xa3'     #  0xB1 -> POUND SIGN
+    '\xa5'     #  0xB2 -> YEN SIGN
+    '\xb7'     #  0xB3 -> MIDDLE DOT
+    '\xa9'     #  0xB4 -> COPYRIGHT SIGN
+    '\xa7'     #  0xB5 -> SECTION SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xbc'     #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '['        #  0xBA -> LEFT SQUARE BRACKET
+    ']'        #  0xBB -> RIGHT SQUARE BRACKET
+    '\xaf'     #  0xBC -> MACRON
+    '\xa8'     #  0xBD -> DIAERESIS
+    '\xb4'     #  0xBE -> ACUTE ACCENT
+    '\xd7'     #  0xBF -> MULTIPLICATION SIGN
+    '{'        #  0xC0 -> LEFT CURLY BRACKET
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\xf4'     #  0xCB -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0xCC -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0xCD -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xCE -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf5'     #  0xCF -> LATIN SMALL LETTER O WITH TILDE
+    '}'        #  0xD0 -> RIGHT CURLY BRACKET
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'     #  0xDA -> SUPERSCRIPT ONE
+    '\xfb'     #  0xDB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xDC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xf9'     #  0xDD -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xDE -> LATIN SMALL LETTER U WITH ACUTE
+    '\xff'     #  0xDF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\\'       #  0xE0 -> REVERSE SOLIDUS
+    '\xf7'     #  0xE1 -> DIVISION SIGN
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\xd4'     #  0xEB -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd6'     #  0xEC -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd2'     #  0xED -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd5'     #  0xEF -> LATIN CAPITAL LETTER O WITH TILDE
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\xdb'     #  0xFB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xFC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xd9'     #  0xFD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xFE -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\x9f'     #  0xFF -> CONTROL
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1250.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1250.py
new file mode 100644
index 0000000000000000000000000000000000000000..c2c83aaf3e884c993bb08f9825b00f6c05e03274
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1250.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1250 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1250.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1250',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\ufffe'   #  0x83 -> UNDEFINED
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\ufffe'   #  0x88 -> UNDEFINED
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0160'   #  0x8A -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u015a'   #  0x8C -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u0164'   #  0x8D -> LATIN CAPITAL LETTER T WITH CARON
+    '\u017d'   #  0x8E -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u0179'   #  0x8F -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0161'   #  0x9A -> LATIN SMALL LETTER S WITH CARON
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u015b'   #  0x9C -> LATIN SMALL LETTER S WITH ACUTE
+    '\u0165'   #  0x9D -> LATIN SMALL LETTER T WITH CARON
+    '\u017e'   #  0x9E -> LATIN SMALL LETTER Z WITH CARON
+    '\u017a'   #  0x9F -> LATIN SMALL LETTER Z WITH ACUTE
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u02c7'   #  0xA1 -> CARON
+    '\u02d8'   #  0xA2 -> BREVE
+    '\u0141'   #  0xA3 -> LATIN CAPITAL LETTER L WITH STROKE
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u0104'   #  0xA5 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u015e'   #  0xAA -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\u017b'   #  0xAF -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u02db'   #  0xB2 -> OGONEK
+    '\u0142'   #  0xB3 -> LATIN SMALL LETTER L WITH STROKE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\u0105'   #  0xB9 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u015f'   #  0xBA -> LATIN SMALL LETTER S WITH CEDILLA
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u013d'   #  0xBC -> LATIN CAPITAL LETTER L WITH CARON
+    '\u02dd'   #  0xBD -> DOUBLE ACUTE ACCENT
+    '\u013e'   #  0xBE -> LATIN SMALL LETTER L WITH CARON
+    '\u017c'   #  0xBF -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u0154'   #  0xC0 -> LATIN CAPITAL LETTER R WITH ACUTE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u0102'   #  0xC3 -> LATIN CAPITAL LETTER A WITH BREVE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u0139'   #  0xC5 -> LATIN CAPITAL LETTER L WITH ACUTE
+    '\u0106'   #  0xC6 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0118'   #  0xCA -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u011a'   #  0xCC -> LATIN CAPITAL LETTER E WITH CARON
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\u010e'   #  0xCF -> LATIN CAPITAL LETTER D WITH CARON
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u0143'   #  0xD1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\u0147'   #  0xD2 -> LATIN CAPITAL LETTER N WITH CARON
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0150'   #  0xD5 -> LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u0158'   #  0xD8 -> LATIN CAPITAL LETTER R WITH CARON
+    '\u016e'   #  0xD9 -> LATIN CAPITAL LETTER U WITH RING ABOVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\u0170'   #  0xDB -> LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\u0162'   #  0xDE -> LATIN CAPITAL LETTER T WITH CEDILLA
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\u0155'   #  0xE0 -> LATIN SMALL LETTER R WITH ACUTE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\u0103'   #  0xE3 -> LATIN SMALL LETTER A WITH BREVE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u013a'   #  0xE5 -> LATIN SMALL LETTER L WITH ACUTE
+    '\u0107'   #  0xE6 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0119'   #  0xEA -> LATIN SMALL LETTER E WITH OGONEK
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u011b'   #  0xEC -> LATIN SMALL LETTER E WITH CARON
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u010f'   #  0xEF -> LATIN SMALL LETTER D WITH CARON
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0144'   #  0xF1 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0148'   #  0xF2 -> LATIN SMALL LETTER N WITH CARON
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u0151'   #  0xF5 -> LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u0159'   #  0xF8 -> LATIN SMALL LETTER R WITH CARON
+    '\u016f'   #  0xF9 -> LATIN SMALL LETTER U WITH RING ABOVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\u0171'   #  0xFB -> LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\u0163'   #  0xFE -> LATIN SMALL LETTER T WITH CEDILLA
+    '\u02d9'   #  0xFF -> DOT ABOVE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1251.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1251.py
new file mode 100644
index 0000000000000000000000000000000000000000..22bc66002d3e8a72d2dd42c79055b61d6b8e082b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1251.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1251 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1251.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1251',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u0402'   #  0x80 -> CYRILLIC CAPITAL LETTER DJE
+    '\u0403'   #  0x81 -> CYRILLIC CAPITAL LETTER GJE
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0453'   #  0x83 -> CYRILLIC SMALL LETTER GJE
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u20ac'   #  0x88 -> EURO SIGN
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0409'   #  0x8A -> CYRILLIC CAPITAL LETTER LJE
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u040a'   #  0x8C -> CYRILLIC CAPITAL LETTER NJE
+    '\u040c'   #  0x8D -> CYRILLIC CAPITAL LETTER KJE
+    '\u040b'   #  0x8E -> CYRILLIC CAPITAL LETTER TSHE
+    '\u040f'   #  0x8F -> CYRILLIC CAPITAL LETTER DZHE
+    '\u0452'   #  0x90 -> CYRILLIC SMALL LETTER DJE
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0459'   #  0x9A -> CYRILLIC SMALL LETTER LJE
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u045a'   #  0x9C -> CYRILLIC SMALL LETTER NJE
+    '\u045c'   #  0x9D -> CYRILLIC SMALL LETTER KJE
+    '\u045b'   #  0x9E -> CYRILLIC SMALL LETTER TSHE
+    '\u045f'   #  0x9F -> CYRILLIC SMALL LETTER DZHE
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u040e'   #  0xA1 -> CYRILLIC CAPITAL LETTER SHORT U
+    '\u045e'   #  0xA2 -> CYRILLIC SMALL LETTER SHORT U
+    '\u0408'   #  0xA3 -> CYRILLIC CAPITAL LETTER JE
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u0490'   #  0xA5 -> CYRILLIC CAPITAL LETTER GHE WITH UPTURN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u0401'   #  0xA8 -> CYRILLIC CAPITAL LETTER IO
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u0404'   #  0xAA -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\u0407'   #  0xAF -> CYRILLIC CAPITAL LETTER YI
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u0406'   #  0xB2 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0456'   #  0xB3 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0491'   #  0xB4 -> CYRILLIC SMALL LETTER GHE WITH UPTURN
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u0451'   #  0xB8 -> CYRILLIC SMALL LETTER IO
+    '\u2116'   #  0xB9 -> NUMERO SIGN
+    '\u0454'   #  0xBA -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u0458'   #  0xBC -> CYRILLIC SMALL LETTER JE
+    '\u0405'   #  0xBD -> CYRILLIC CAPITAL LETTER DZE
+    '\u0455'   #  0xBE -> CYRILLIC SMALL LETTER DZE
+    '\u0457'   #  0xBF -> CYRILLIC SMALL LETTER YI
+    '\u0410'   #  0xC0 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xC1 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0xC2 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0xC3 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0xC4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xC5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0xC6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0xC7 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0xC8 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xC9 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xCA -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xCB -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xCC -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xCD -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xCE -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xCF -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0xD0 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xD1 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xD2 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xD3 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0xD4 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0xD5 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0xD6 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0xD7 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0xD8 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0xD9 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0xDA -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0xDB -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0xDC -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0xDD -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0xDE -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0xDF -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'   #  0xE0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xE1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0xE2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0xE3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0xE4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xE5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0xE6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0xE7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0xE8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xE9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xEA -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xEB -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xEC -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xED -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xEE -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xEF -> CYRILLIC SMALL LETTER PE
+    '\u0440'   #  0xF0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xF1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xF2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xF3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0xF4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0xF5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0xF6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0xF7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0xF8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0xF9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0xFA -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0xFB -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0xFC -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0xFD -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0xFE -> CYRILLIC SMALL LETTER YU
+    '\u044f'   #  0xFF -> CYRILLIC SMALL LETTER YA
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1252.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1252.py
new file mode 100644
index 0000000000000000000000000000000000000000..c0e8088ea829ffed5adf6aff2442f4b310efb77b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1252.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1252 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1252.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1252',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0160'   #  0x8A -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u0152'   #  0x8C -> LATIN CAPITAL LIGATURE OE
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\u017d'   #  0x8E -> LATIN CAPITAL LETTER Z WITH CARON
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u02dc'   #  0x98 -> SMALL TILDE
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0161'   #  0x9A -> LATIN SMALL LETTER S WITH CARON
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0153'   #  0x9C -> LATIN SMALL LIGATURE OE
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\u017e'   #  0x9E -> LATIN SMALL LETTER Z WITH CARON
+    '\u0178'   #  0x9F -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xd0'     #  0xD0 -> LATIN CAPITAL LETTER ETH
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf0'     #  0xF0 -> LATIN SMALL LETTER ETH
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0xFE -> LATIN SMALL LETTER THORN
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1253.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1253.py
new file mode 100644
index 0000000000000000000000000000000000000000..ec9c0972d10d72566c337fec1f372031003819b0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1253.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1253 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1253.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1253',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\ufffe'   #  0x88 -> UNDEFINED
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\ufffe'   #  0x8A -> UNDEFINED
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x8C -> UNDEFINED
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0385'   #  0xA1 -> GREEK DIALYTIKA TONOS
+    '\u0386'   #  0xA2 -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\ufffe'   #  0xAA -> UNDEFINED
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\u2015'   #  0xAF -> HORIZONTAL BAR
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\u0384'   #  0xB4 -> GREEK TONOS
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u0388'   #  0xB8 -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u0389'   #  0xB9 -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\u038a'   #  0xBA -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u038c'   #  0xBC -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\u038e'   #  0xBE -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u038f'   #  0xBF -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '\u0390'   #  0xC0 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    '\u0391'   #  0xC1 -> GREEK CAPITAL LETTER ALPHA
+    '\u0392'   #  0xC2 -> GREEK CAPITAL LETTER BETA
+    '\u0393'   #  0xC3 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0xC4 -> GREEK CAPITAL LETTER DELTA
+    '\u0395'   #  0xC5 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0xC6 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0xC7 -> GREEK CAPITAL LETTER ETA
+    '\u0398'   #  0xC8 -> GREEK CAPITAL LETTER THETA
+    '\u0399'   #  0xC9 -> GREEK CAPITAL LETTER IOTA
+    '\u039a'   #  0xCA -> GREEK CAPITAL LETTER KAPPA
+    '\u039b'   #  0xCB -> GREEK CAPITAL LETTER LAMDA
+    '\u039c'   #  0xCC -> GREEK CAPITAL LETTER MU
+    '\u039d'   #  0xCD -> GREEK CAPITAL LETTER NU
+    '\u039e'   #  0xCE -> GREEK CAPITAL LETTER XI
+    '\u039f'   #  0xCF -> GREEK CAPITAL LETTER OMICRON
+    '\u03a0'   #  0xD0 -> GREEK CAPITAL LETTER PI
+    '\u03a1'   #  0xD1 -> GREEK CAPITAL LETTER RHO
+    '\ufffe'   #  0xD2 -> UNDEFINED
+    '\u03a3'   #  0xD3 -> GREEK CAPITAL LETTER SIGMA
+    '\u03a4'   #  0xD4 -> GREEK CAPITAL LETTER TAU
+    '\u03a5'   #  0xD5 -> GREEK CAPITAL LETTER UPSILON
+    '\u03a6'   #  0xD6 -> GREEK CAPITAL LETTER PHI
+    '\u03a7'   #  0xD7 -> GREEK CAPITAL LETTER CHI
+    '\u03a8'   #  0xD8 -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0xD9 -> GREEK CAPITAL LETTER OMEGA
+    '\u03aa'   #  0xDA -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\u03ab'   #  0xDB -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '\u03ac'   #  0xDC -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\u03ad'   #  0xDD -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0xDE -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03af'   #  0xDF -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03b0'   #  0xE0 -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    '\u03b1'   #  0xE1 -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0xE2 -> GREEK SMALL LETTER BETA
+    '\u03b3'   #  0xE3 -> GREEK SMALL LETTER GAMMA
+    '\u03b4'   #  0xE4 -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0xE5 -> GREEK SMALL LETTER EPSILON
+    '\u03b6'   #  0xE6 -> GREEK SMALL LETTER ZETA
+    '\u03b7'   #  0xE7 -> GREEK SMALL LETTER ETA
+    '\u03b8'   #  0xE8 -> GREEK SMALL LETTER THETA
+    '\u03b9'   #  0xE9 -> GREEK SMALL LETTER IOTA
+    '\u03ba'   #  0xEA -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0xEB -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0xEC -> GREEK SMALL LETTER MU
+    '\u03bd'   #  0xED -> GREEK SMALL LETTER NU
+    '\u03be'   #  0xEE -> GREEK SMALL LETTER XI
+    '\u03bf'   #  0xEF -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0xF0 -> GREEK SMALL LETTER PI
+    '\u03c1'   #  0xF1 -> GREEK SMALL LETTER RHO
+    '\u03c2'   #  0xF2 -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c3'   #  0xF3 -> GREEK SMALL LETTER SIGMA
+    '\u03c4'   #  0xF4 -> GREEK SMALL LETTER TAU
+    '\u03c5'   #  0xF5 -> GREEK SMALL LETTER UPSILON
+    '\u03c6'   #  0xF6 -> GREEK SMALL LETTER PHI
+    '\u03c7'   #  0xF7 -> GREEK SMALL LETTER CHI
+    '\u03c8'   #  0xF8 -> GREEK SMALL LETTER PSI
+    '\u03c9'   #  0xF9 -> GREEK SMALL LETTER OMEGA
+    '\u03ca'   #  0xFA -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u03cb'   #  0xFB -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u03cc'   #  0xFC -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u03cd'   #  0xFD -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u03ce'   #  0xFE -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\ufffe'   #  0xFF -> UNDEFINED
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1254.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1254.py
new file mode 100644
index 0000000000000000000000000000000000000000..4912327a5bcfc46a62579db4f6edfd89cde7bd5f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1254.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1254 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1254.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1254',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0160'   #  0x8A -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u0152'   #  0x8C -> LATIN CAPITAL LIGATURE OE
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u02dc'   #  0x98 -> SMALL TILDE
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0161'   #  0x9A -> LATIN SMALL LETTER S WITH CARON
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0153'   #  0x9C -> LATIN SMALL LIGATURE OE
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\u0178'   #  0x9F -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u011e'   #  0xD0 -> LATIN CAPITAL LETTER G WITH BREVE
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0130'   #  0xDD -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '\u015e'   #  0xDE -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u011f'   #  0xF0 -> LATIN SMALL LETTER G WITH BREVE
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u0131'   #  0xFD -> LATIN SMALL LETTER DOTLESS I
+    '\u015f'   #  0xFE -> LATIN SMALL LETTER S WITH CEDILLA
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1255.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1255.py
new file mode 100644
index 0000000000000000000000000000000000000000..91ce26b9bff1f636ccb212063727747225efedcb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1255.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1255 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1255.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1255',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\ufffe'   #  0x8A -> UNDEFINED
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x8C -> UNDEFINED
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u02dc'   #  0x98 -> SMALL TILDE
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\u20aa'   #  0xA4 -> NEW SHEQEL SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xd7'     #  0xAA -> MULTIPLICATION SIGN
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xf7'     #  0xBA -> DIVISION SIGN
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\u05b0'   #  0xC0 -> HEBREW POINT SHEVA
+    '\u05b1'   #  0xC1 -> HEBREW POINT HATAF SEGOL
+    '\u05b2'   #  0xC2 -> HEBREW POINT HATAF PATAH
+    '\u05b3'   #  0xC3 -> HEBREW POINT HATAF QAMATS
+    '\u05b4'   #  0xC4 -> HEBREW POINT HIRIQ
+    '\u05b5'   #  0xC5 -> HEBREW POINT TSERE
+    '\u05b6'   #  0xC6 -> HEBREW POINT SEGOL
+    '\u05b7'   #  0xC7 -> HEBREW POINT PATAH
+    '\u05b8'   #  0xC8 -> HEBREW POINT QAMATS
+    '\u05b9'   #  0xC9 -> HEBREW POINT HOLAM
+    '\ufffe'   #  0xCA -> UNDEFINED
+    '\u05bb'   #  0xCB -> HEBREW POINT QUBUTS
+    '\u05bc'   #  0xCC -> HEBREW POINT DAGESH OR MAPIQ
+    '\u05bd'   #  0xCD -> HEBREW POINT METEG
+    '\u05be'   #  0xCE -> HEBREW PUNCTUATION MAQAF
+    '\u05bf'   #  0xCF -> HEBREW POINT RAFE
+    '\u05c0'   #  0xD0 -> HEBREW PUNCTUATION PASEQ
+    '\u05c1'   #  0xD1 -> HEBREW POINT SHIN DOT
+    '\u05c2'   #  0xD2 -> HEBREW POINT SIN DOT
+    '\u05c3'   #  0xD3 -> HEBREW PUNCTUATION SOF PASUQ
+    '\u05f0'   #  0xD4 -> HEBREW LIGATURE YIDDISH DOUBLE VAV
+    '\u05f1'   #  0xD5 -> HEBREW LIGATURE YIDDISH VAV YOD
+    '\u05f2'   #  0xD6 -> HEBREW LIGATURE YIDDISH DOUBLE YOD
+    '\u05f3'   #  0xD7 -> HEBREW PUNCTUATION GERESH
+    '\u05f4'   #  0xD8 -> HEBREW PUNCTUATION GERSHAYIM
+    '\ufffe'   #  0xD9 -> UNDEFINED
+    '\ufffe'   #  0xDA -> UNDEFINED
+    '\ufffe'   #  0xDB -> UNDEFINED
+    '\ufffe'   #  0xDC -> UNDEFINED
+    '\ufffe'   #  0xDD -> UNDEFINED
+    '\ufffe'   #  0xDE -> UNDEFINED
+    '\ufffe'   #  0xDF -> UNDEFINED
+    '\u05d0'   #  0xE0 -> HEBREW LETTER ALEF
+    '\u05d1'   #  0xE1 -> HEBREW LETTER BET
+    '\u05d2'   #  0xE2 -> HEBREW LETTER GIMEL
+    '\u05d3'   #  0xE3 -> HEBREW LETTER DALET
+    '\u05d4'   #  0xE4 -> HEBREW LETTER HE
+    '\u05d5'   #  0xE5 -> HEBREW LETTER VAV
+    '\u05d6'   #  0xE6 -> HEBREW LETTER ZAYIN
+    '\u05d7'   #  0xE7 -> HEBREW LETTER HET
+    '\u05d8'   #  0xE8 -> HEBREW LETTER TET
+    '\u05d9'   #  0xE9 -> HEBREW LETTER YOD
+    '\u05da'   #  0xEA -> HEBREW LETTER FINAL KAF
+    '\u05db'   #  0xEB -> HEBREW LETTER KAF
+    '\u05dc'   #  0xEC -> HEBREW LETTER LAMED
+    '\u05dd'   #  0xED -> HEBREW LETTER FINAL MEM
+    '\u05de'   #  0xEE -> HEBREW LETTER MEM
+    '\u05df'   #  0xEF -> HEBREW LETTER FINAL NUN
+    '\u05e0'   #  0xF0 -> HEBREW LETTER NUN
+    '\u05e1'   #  0xF1 -> HEBREW LETTER SAMEKH
+    '\u05e2'   #  0xF2 -> HEBREW LETTER AYIN
+    '\u05e3'   #  0xF3 -> HEBREW LETTER FINAL PE
+    '\u05e4'   #  0xF4 -> HEBREW LETTER PE
+    '\u05e5'   #  0xF5 -> HEBREW LETTER FINAL TSADI
+    '\u05e6'   #  0xF6 -> HEBREW LETTER TSADI
+    '\u05e7'   #  0xF7 -> HEBREW LETTER QOF
+    '\u05e8'   #  0xF8 -> HEBREW LETTER RESH
+    '\u05e9'   #  0xF9 -> HEBREW LETTER SHIN
+    '\u05ea'   #  0xFA -> HEBREW LETTER TAV
+    '\ufffe'   #  0xFB -> UNDEFINED
+    '\ufffe'   #  0xFC -> UNDEFINED
+    '\u200e'   #  0xFD -> LEFT-TO-RIGHT MARK
+    '\u200f'   #  0xFE -> RIGHT-TO-LEFT MARK
+    '\ufffe'   #  0xFF -> UNDEFINED
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1256.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1256.py
new file mode 100644
index 0000000000000000000000000000000000000000..fd6afab52c634c7d801de6d7a642ce966a697d88
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1256.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1256 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1256.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1256',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\u067e'   #  0x81 -> ARABIC LETTER PEH
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0679'   #  0x8A -> ARABIC LETTER TTEH
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u0152'   #  0x8C -> LATIN CAPITAL LIGATURE OE
+    '\u0686'   #  0x8D -> ARABIC LETTER TCHEH
+    '\u0698'   #  0x8E -> ARABIC LETTER JEH
+    '\u0688'   #  0x8F -> ARABIC LETTER DDAL
+    '\u06af'   #  0x90 -> ARABIC LETTER GAF
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u06a9'   #  0x98 -> ARABIC LETTER KEHEH
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0691'   #  0x9A -> ARABIC LETTER RREH
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0153'   #  0x9C -> LATIN SMALL LIGATURE OE
+    '\u200c'   #  0x9D -> ZERO WIDTH NON-JOINER
+    '\u200d'   #  0x9E -> ZERO WIDTH JOINER
+    '\u06ba'   #  0x9F -> ARABIC LETTER NOON GHUNNA
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u060c'   #  0xA1 -> ARABIC COMMA
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u06be'   #  0xAA -> ARABIC LETTER HEH DOACHASHMEE
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\u061b'   #  0xBA -> ARABIC SEMICOLON
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\u061f'   #  0xBF -> ARABIC QUESTION MARK
+    '\u06c1'   #  0xC0 -> ARABIC LETTER HEH GOAL
+    '\u0621'   #  0xC1 -> ARABIC LETTER HAMZA
+    '\u0622'   #  0xC2 -> ARABIC LETTER ALEF WITH MADDA ABOVE
+    '\u0623'   #  0xC3 -> ARABIC LETTER ALEF WITH HAMZA ABOVE
+    '\u0624'   #  0xC4 -> ARABIC LETTER WAW WITH HAMZA ABOVE
+    '\u0625'   #  0xC5 -> ARABIC LETTER ALEF WITH HAMZA BELOW
+    '\u0626'   #  0xC6 -> ARABIC LETTER YEH WITH HAMZA ABOVE
+    '\u0627'   #  0xC7 -> ARABIC LETTER ALEF
+    '\u0628'   #  0xC8 -> ARABIC LETTER BEH
+    '\u0629'   #  0xC9 -> ARABIC LETTER TEH MARBUTA
+    '\u062a'   #  0xCA -> ARABIC LETTER TEH
+    '\u062b'   #  0xCB -> ARABIC LETTER THEH
+    '\u062c'   #  0xCC -> ARABIC LETTER JEEM
+    '\u062d'   #  0xCD -> ARABIC LETTER HAH
+    '\u062e'   #  0xCE -> ARABIC LETTER KHAH
+    '\u062f'   #  0xCF -> ARABIC LETTER DAL
+    '\u0630'   #  0xD0 -> ARABIC LETTER THAL
+    '\u0631'   #  0xD1 -> ARABIC LETTER REH
+    '\u0632'   #  0xD2 -> ARABIC LETTER ZAIN
+    '\u0633'   #  0xD3 -> ARABIC LETTER SEEN
+    '\u0634'   #  0xD4 -> ARABIC LETTER SHEEN
+    '\u0635'   #  0xD5 -> ARABIC LETTER SAD
+    '\u0636'   #  0xD6 -> ARABIC LETTER DAD
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u0637'   #  0xD8 -> ARABIC LETTER TAH
+    '\u0638'   #  0xD9 -> ARABIC LETTER ZAH
+    '\u0639'   #  0xDA -> ARABIC LETTER AIN
+    '\u063a'   #  0xDB -> ARABIC LETTER GHAIN
+    '\u0640'   #  0xDC -> ARABIC TATWEEL
+    '\u0641'   #  0xDD -> ARABIC LETTER FEH
+    '\u0642'   #  0xDE -> ARABIC LETTER QAF
+    '\u0643'   #  0xDF -> ARABIC LETTER KAF
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\u0644'   #  0xE1 -> ARABIC LETTER LAM
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\u0645'   #  0xE3 -> ARABIC LETTER MEEM
+    '\u0646'   #  0xE4 -> ARABIC LETTER NOON
+    '\u0647'   #  0xE5 -> ARABIC LETTER HEH
+    '\u0648'   #  0xE6 -> ARABIC LETTER WAW
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u0649'   #  0xEC -> ARABIC LETTER ALEF MAKSURA
+    '\u064a'   #  0xED -> ARABIC LETTER YEH
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u064b'   #  0xF0 -> ARABIC FATHATAN
+    '\u064c'   #  0xF1 -> ARABIC DAMMATAN
+    '\u064d'   #  0xF2 -> ARABIC KASRATAN
+    '\u064e'   #  0xF3 -> ARABIC FATHA
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u064f'   #  0xF5 -> ARABIC DAMMA
+    '\u0650'   #  0xF6 -> ARABIC KASRA
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u0651'   #  0xF8 -> ARABIC SHADDA
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\u0652'   #  0xFA -> ARABIC SUKUN
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u200e'   #  0xFD -> LEFT-TO-RIGHT MARK
+    '\u200f'   #  0xFE -> RIGHT-TO-LEFT MARK
+    '\u06d2'   #  0xFF -> ARABIC LETTER YEH BARREE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1257.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1257.py
new file mode 100644
index 0000000000000000000000000000000000000000..9ebc90d509d3c6dfd76cb9a1d0072a51a3b6a22a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1257.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1257 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1257.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1257',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\ufffe'   #  0x83 -> UNDEFINED
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\ufffe'   #  0x88 -> UNDEFINED
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\ufffe'   #  0x8A -> UNDEFINED
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x8C -> UNDEFINED
+    '\xa8'     #  0x8D -> DIAERESIS
+    '\u02c7'   #  0x8E -> CARON
+    '\xb8'     #  0x8F -> CEDILLA
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\xaf'     #  0x9D -> MACRON
+    '\u02db'   #  0x9E -> OGONEK
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\ufffe'   #  0xA1 -> UNDEFINED
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\ufffe'   #  0xA5 -> UNDEFINED
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xd8'     #  0xA8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u0156'   #  0xAA -> LATIN CAPITAL LETTER R WITH CEDILLA
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xc6'     #  0xAF -> LATIN CAPITAL LETTER AE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xf8'     #  0xB8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\u0157'   #  0xBA -> LATIN SMALL LETTER R WITH CEDILLA
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xe6'     #  0xBF -> LATIN SMALL LETTER AE
+    '\u0104'   #  0xC0 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u012e'   #  0xC1 -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u0100'   #  0xC2 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\u0106'   #  0xC3 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\u0118'   #  0xC6 -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\u0112'   #  0xC7 -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0179'   #  0xCA -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\u0116'   #  0xCB -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\u0122'   #  0xCC -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\u0136'   #  0xCD -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\u012a'   #  0xCE -> LATIN CAPITAL LETTER I WITH MACRON
+    '\u013b'   #  0xCF -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\u0160'   #  0xD0 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0143'   #  0xD1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\u0145'   #  0xD2 -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\u014c'   #  0xD4 -> LATIN CAPITAL LETTER O WITH MACRON
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u0172'   #  0xD8 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\u0141'   #  0xD9 -> LATIN CAPITAL LETTER L WITH STROKE
+    '\u015a'   #  0xDA -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u016a'   #  0xDB -> LATIN CAPITAL LETTER U WITH MACRON
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u017b'   #  0xDD -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\u017d'   #  0xDE -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\u0105'   #  0xE0 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u012f'   #  0xE1 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u0101'   #  0xE2 -> LATIN SMALL LETTER A WITH MACRON
+    '\u0107'   #  0xE3 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\u0119'   #  0xE6 -> LATIN SMALL LETTER E WITH OGONEK
+    '\u0113'   #  0xE7 -> LATIN SMALL LETTER E WITH MACRON
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u017a'   #  0xEA -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u0117'   #  0xEB -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\u0123'   #  0xEC -> LATIN SMALL LETTER G WITH CEDILLA
+    '\u0137'   #  0xED -> LATIN SMALL LETTER K WITH CEDILLA
+    '\u012b'   #  0xEE -> LATIN SMALL LETTER I WITH MACRON
+    '\u013c'   #  0xEF -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u0161'   #  0xF0 -> LATIN SMALL LETTER S WITH CARON
+    '\u0144'   #  0xF1 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0146'   #  0xF2 -> LATIN SMALL LETTER N WITH CEDILLA
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\u014d'   #  0xF4 -> LATIN SMALL LETTER O WITH MACRON
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u0173'   #  0xF8 -> LATIN SMALL LETTER U WITH OGONEK
+    '\u0142'   #  0xF9 -> LATIN SMALL LETTER L WITH STROKE
+    '\u015b'   #  0xFA -> LATIN SMALL LETTER S WITH ACUTE
+    '\u016b'   #  0xFB -> LATIN SMALL LETTER U WITH MACRON
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u017c'   #  0xFD -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u017e'   #  0xFE -> LATIN SMALL LETTER Z WITH CARON
+    '\u02d9'   #  0xFF -> DOT ABOVE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1258.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1258.py
new file mode 100644
index 0000000000000000000000000000000000000000..784378a83697ca6ce6eef95d852e42a821ccd27d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp1258.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp1258 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP1258.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp1258',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\ufffe'   #  0x8A -> UNDEFINED
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u0152'   #  0x8C -> LATIN CAPITAL LIGATURE OE
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u02dc'   #  0x98 -> SMALL TILDE
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0153'   #  0x9C -> LATIN SMALL LIGATURE OE
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\u0178'   #  0x9F -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u0102'   #  0xC3 -> LATIN CAPITAL LETTER A WITH BREVE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u0300'   #  0xCC -> COMBINING GRAVE ACCENT
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\u0309'   #  0xD2 -> COMBINING HOOK ABOVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u01a0'   #  0xD5 -> LATIN CAPITAL LETTER O WITH HORN
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u01af'   #  0xDD -> LATIN CAPITAL LETTER U WITH HORN
+    '\u0303'   #  0xDE -> COMBINING TILDE
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\u0103'   #  0xE3 -> LATIN SMALL LETTER A WITH BREVE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u0301'   #  0xEC -> COMBINING ACUTE ACCENT
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\u0323'   #  0xF2 -> COMBINING DOT BELOW
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u01a1'   #  0xF5 -> LATIN SMALL LETTER O WITH HORN
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u01b0'   #  0xFD -> LATIN SMALL LETTER U WITH HORN
+    '\u20ab'   #  0xFE -> DONG SIGN
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp273.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp273.py
new file mode 100644
index 0000000000000000000000000000000000000000..69c6d778c57345f03305d7e0cdfa6aea736a3b0f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp273.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp273 generated from 'python-mappings/CP273.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp273',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'      #  0x00 -> NULL (NUL)
+    '\x01'      #  0x01 -> START OF HEADING (SOH)
+    '\x02'      #  0x02 -> START OF TEXT (STX)
+    '\x03'      #  0x03 -> END OF TEXT (ETX)
+    '\x9c'      #  0x04 -> STRING TERMINATOR (ST)
+    '\t'        #  0x05 -> CHARACTER TABULATION (HT)
+    '\x86'      #  0x06 -> START OF SELECTED AREA (SSA)
+    '\x7f'      #  0x07 -> DELETE (DEL)
+    '\x97'      #  0x08 -> END OF GUARDED AREA (EPA)
+    '\x8d'      #  0x09 -> REVERSE LINE FEED (RI)
+    '\x8e'      #  0x0A -> SINGLE-SHIFT TWO (SS2)
+    '\x0b'      #  0x0B -> LINE TABULATION (VT)
+    '\x0c'      #  0x0C -> FORM FEED (FF)
+    '\r'        #  0x0D -> CARRIAGE RETURN (CR)
+    '\x0e'      #  0x0E -> SHIFT OUT (SO)
+    '\x0f'      #  0x0F -> SHIFT IN (SI)
+    '\x10'      #  0x10 -> DATALINK ESCAPE (DLE)
+    '\x11'      #  0x11 -> DEVICE CONTROL ONE (DC1)
+    '\x12'      #  0x12 -> DEVICE CONTROL TWO (DC2)
+    '\x13'      #  0x13 -> DEVICE CONTROL THREE (DC3)
+    '\x9d'      #  0x14 -> OPERATING SYSTEM COMMAND (OSC)
+    '\x85'      #  0x15 -> NEXT LINE (NEL)
+    '\x08'      #  0x16 -> BACKSPACE (BS)
+    '\x87'      #  0x17 -> END OF SELECTED AREA (ESA)
+    '\x18'      #  0x18 -> CANCEL (CAN)
+    '\x19'      #  0x19 -> END OF MEDIUM (EM)
+    '\x92'      #  0x1A -> PRIVATE USE TWO (PU2)
+    '\x8f'      #  0x1B -> SINGLE-SHIFT THREE (SS3)
+    '\x1c'      #  0x1C -> FILE SEPARATOR (IS4)
+    '\x1d'      #  0x1D -> GROUP SEPARATOR (IS3)
+    '\x1e'      #  0x1E -> RECORD SEPARATOR (IS2)
+    '\x1f'      #  0x1F -> UNIT SEPARATOR (IS1)
+    '\x80'      #  0x20 -> PADDING CHARACTER (PAD)
+    '\x81'      #  0x21 -> HIGH OCTET PRESET (HOP)
+    '\x82'      #  0x22 -> BREAK PERMITTED HERE (BPH)
+    '\x83'      #  0x23 -> NO BREAK HERE (NBH)
+    '\x84'      #  0x24 -> INDEX (IND)
+    '\n'        #  0x25 -> LINE FEED (LF)
+    '\x17'      #  0x26 -> END OF TRANSMISSION BLOCK (ETB)
+    '\x1b'      #  0x27 -> ESCAPE (ESC)
+    '\x88'      #  0x28 -> CHARACTER TABULATION SET (HTS)
+    '\x89'      #  0x29 -> CHARACTER TABULATION WITH JUSTIFICATION (HTJ)
+    '\x8a'      #  0x2A -> LINE TABULATION SET (VTS)
+    '\x8b'      #  0x2B -> PARTIAL LINE FORWARD (PLD)
+    '\x8c'      #  0x2C -> PARTIAL LINE BACKWARD (PLU)
+    '\x05'      #  0x2D -> ENQUIRY (ENQ)
+    '\x06'      #  0x2E -> ACKNOWLEDGE (ACK)
+    '\x07'      #  0x2F -> BELL (BEL)
+    '\x90'      #  0x30 -> DEVICE CONTROL STRING (DCS)
+    '\x91'      #  0x31 -> PRIVATE USE ONE (PU1)
+    '\x16'      #  0x32 -> SYNCHRONOUS IDLE (SYN)
+    '\x93'      #  0x33 -> SET TRANSMIT STATE (STS)
+    '\x94'      #  0x34 -> CANCEL CHARACTER (CCH)
+    '\x95'      #  0x35 -> MESSAGE WAITING (MW)
+    '\x96'      #  0x36 -> START OF GUARDED AREA (SPA)
+    '\x04'      #  0x37 -> END OF TRANSMISSION (EOT)
+    '\x98'      #  0x38 -> START OF STRING (SOS)
+    '\x99'      #  0x39 -> SINGLE GRAPHIC CHARACTER INTRODUCER (SGCI)
+    '\x9a'      #  0x3A -> SINGLE CHARACTER INTRODUCER (SCI)
+    '\x9b'      #  0x3B -> CONTROL SEQUENCE INTRODUCER (CSI)
+    '\x14'      #  0x3C -> DEVICE CONTROL FOUR (DC4)
+    '\x15'      #  0x3D -> NEGATIVE ACKNOWLEDGE (NAK)
+    '\x9e'      #  0x3E -> PRIVACY MESSAGE (PM)
+    '\x1a'      #  0x3F -> SUBSTITUTE (SUB)
+    ' '         #  0x40 -> SPACE
+    '\xa0'      #  0x41 -> NO-BREAK SPACE
+    '\xe2'      #  0x42 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '{'         #  0x43 -> LEFT CURLY BRACKET
+    '\xe0'      #  0x44 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'      #  0x45 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe3'      #  0x46 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'      #  0x47 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'      #  0x48 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xf1'      #  0x49 -> LATIN SMALL LETTER N WITH TILDE
+    '\xc4'      #  0x4A -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '.'         #  0x4B -> FULL STOP
+    '<'         #  0x4C -> LESS-THAN SIGN
+    '('         #  0x4D -> LEFT PARENTHESIS
+    '+'         #  0x4E -> PLUS SIGN
+    '!'         #  0x4F -> EXCLAMATION MARK
+    '&'         #  0x50 -> AMPERSAND
+    '\xe9'      #  0x51 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'      #  0x52 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'      #  0x53 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'      #  0x54 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xed'      #  0x55 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'      #  0x56 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'      #  0x57 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xec'      #  0x58 -> LATIN SMALL LETTER I WITH GRAVE
+    '~'         #  0x59 -> TILDE
+    '\xdc'      #  0x5A -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '$'         #  0x5B -> DOLLAR SIGN
+    '*'         #  0x5C -> ASTERISK
+    ')'         #  0x5D -> RIGHT PARENTHESIS
+    ';'         #  0x5E -> SEMICOLON
+    '^'         #  0x5F -> CIRCUMFLEX ACCENT
+    '-'         #  0x60 -> HYPHEN-MINUS
+    '/'         #  0x61 -> SOLIDUS
+    '\xc2'      #  0x62 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '['         #  0x63 -> LEFT SQUARE BRACKET
+    '\xc0'      #  0x64 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'      #  0x65 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'      #  0x66 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc5'      #  0x67 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'      #  0x68 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xd1'      #  0x69 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xf6'      #  0x6A -> LATIN SMALL LETTER O WITH DIAERESIS
+    ','         #  0x6B -> COMMA
+    '%'         #  0x6C -> PERCENT SIGN
+    '_'         #  0x6D -> LOW LINE
+    '>'         #  0x6E -> GREATER-THAN SIGN
+    '?'         #  0x6F -> QUESTION MARK
+    '\xf8'      #  0x70 -> LATIN SMALL LETTER O WITH STROKE
+    '\xc9'      #  0x71 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'      #  0x72 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'      #  0x73 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'      #  0x74 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'      #  0x75 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'      #  0x76 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'      #  0x77 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'      #  0x78 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '`'         #  0x79 -> GRAVE ACCENT
+    ':'         #  0x7A -> COLON
+    '#'         #  0x7B -> NUMBER SIGN
+    '\xa7'      #  0x7C -> SECTION SIGN
+    "'"         #  0x7D -> APOSTROPHE
+    '='         #  0x7E -> EQUALS SIGN
+    '"'         #  0x7F -> QUOTATION MARK
+    '\xd8'      #  0x80 -> LATIN CAPITAL LETTER O WITH STROKE
+    'a'         #  0x81 -> LATIN SMALL LETTER A
+    'b'         #  0x82 -> LATIN SMALL LETTER B
+    'c'         #  0x83 -> LATIN SMALL LETTER C
+    'd'         #  0x84 -> LATIN SMALL LETTER D
+    'e'         #  0x85 -> LATIN SMALL LETTER E
+    'f'         #  0x86 -> LATIN SMALL LETTER F
+    'g'         #  0x87 -> LATIN SMALL LETTER G
+    'h'         #  0x88 -> LATIN SMALL LETTER H
+    'i'         #  0x89 -> LATIN SMALL LETTER I
+    '\xab'      #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'      #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xf0'      #  0x8C -> LATIN SMALL LETTER ETH (Icelandic)
+    '\xfd'      #  0x8D -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'      #  0x8E -> LATIN SMALL LETTER THORN (Icelandic)
+    '\xb1'      #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'      #  0x90 -> DEGREE SIGN
+    'j'         #  0x91 -> LATIN SMALL LETTER J
+    'k'         #  0x92 -> LATIN SMALL LETTER K
+    'l'         #  0x93 -> LATIN SMALL LETTER L
+    'm'         #  0x94 -> LATIN SMALL LETTER M
+    'n'         #  0x95 -> LATIN SMALL LETTER N
+    'o'         #  0x96 -> LATIN SMALL LETTER O
+    'p'         #  0x97 -> LATIN SMALL LETTER P
+    'q'         #  0x98 -> LATIN SMALL LETTER Q
+    'r'         #  0x99 -> LATIN SMALL LETTER R
+    '\xaa'      #  0x9A -> FEMININE ORDINAL INDICATOR
+    '\xba'      #  0x9B -> MASCULINE ORDINAL INDICATOR
+    '\xe6'      #  0x9C -> LATIN SMALL LETTER AE
+    '\xb8'      #  0x9D -> CEDILLA
+    '\xc6'      #  0x9E -> LATIN CAPITAL LETTER AE
+    '\xa4'      #  0x9F -> CURRENCY SIGN
+    '\xb5'      #  0xA0 -> MICRO SIGN
+    '\xdf'      #  0xA1 -> LATIN SMALL LETTER SHARP S (German)
+    's'         #  0xA2 -> LATIN SMALL LETTER S
+    't'         #  0xA3 -> LATIN SMALL LETTER T
+    'u'         #  0xA4 -> LATIN SMALL LETTER U
+    'v'         #  0xA5 -> LATIN SMALL LETTER V
+    'w'         #  0xA6 -> LATIN SMALL LETTER W
+    'x'         #  0xA7 -> LATIN SMALL LETTER X
+    'y'         #  0xA8 -> LATIN SMALL LETTER Y
+    'z'         #  0xA9 -> LATIN SMALL LETTER Z
+    '\xa1'      #  0xAA -> INVERTED EXCLAMATION MARK
+    '\xbf'      #  0xAB -> INVERTED QUESTION MARK
+    '\xd0'      #  0xAC -> LATIN CAPITAL LETTER ETH (Icelandic)
+    '\xdd'      #  0xAD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'      #  0xAE -> LATIN CAPITAL LETTER THORN (Icelandic)
+    '\xae'      #  0xAF -> REGISTERED SIGN
+    '\xa2'      #  0xB0 -> CENT SIGN
+    '\xa3'      #  0xB1 -> POUND SIGN
+    '\xa5'      #  0xB2 -> YEN SIGN
+    '\xb7'      #  0xB3 -> MIDDLE DOT
+    '\xa9'      #  0xB4 -> COPYRIGHT SIGN
+    '@'         #  0xB5 -> COMMERCIAL AT
+    '\xb6'      #  0xB6 -> PILCROW SIGN
+    '\xbc'      #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'      #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'      #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '\xac'      #  0xBA -> NOT SIGN
+    '|'         #  0xBB -> VERTICAL LINE
+    '\u203e'    #  0xBC -> OVERLINE
+    '\xa8'      #  0xBD -> DIAERESIS
+    '\xb4'      #  0xBE -> ACUTE ACCENT
+    '\xd7'      #  0xBF -> MULTIPLICATION SIGN
+    '\xe4'      #  0xC0 -> LATIN SMALL LETTER A WITH DIAERESIS
+    'A'         #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'         #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'         #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'         #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'         #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'         #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'         #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'         #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'         #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'      #  0xCA -> SOFT HYPHEN
+    '\xf4'      #  0xCB -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xa6'      #  0xCC -> BROKEN BAR
+    '\xf2'      #  0xCD -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'      #  0xCE -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf5'      #  0xCF -> LATIN SMALL LETTER O WITH TILDE
+    '\xfc'      #  0xD0 -> LATIN SMALL LETTER U WITH DIAERESIS
+    'J'         #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'         #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'         #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'         #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'         #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'         #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'         #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'         #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'         #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'      #  0xDA -> SUPERSCRIPT ONE
+    '\xfb'      #  0xDB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '}'         #  0xDC -> RIGHT CURLY BRACKET
+    '\xf9'      #  0xDD -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'      #  0xDE -> LATIN SMALL LETTER U WITH ACUTE
+    '\xff'      #  0xDF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xd6'      #  0xE0 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xf7'      #  0xE1 -> DIVISION SIGN
+    'S'         #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'         #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'         #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'         #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'         #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'         #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'         #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'         #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'      #  0xEA -> SUPERSCRIPT TWO
+    '\xd4'      #  0xEB -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\\'        #  0xEC -> REVERSE SOLIDUS
+    '\xd2'      #  0xED -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'      #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd5'      #  0xEF -> LATIN CAPITAL LETTER O WITH TILDE
+    '0'         #  0xF0 -> DIGIT ZERO
+    '1'         #  0xF1 -> DIGIT ONE
+    '2'         #  0xF2 -> DIGIT TWO
+    '3'         #  0xF3 -> DIGIT THREE
+    '4'         #  0xF4 -> DIGIT FOUR
+    '5'         #  0xF5 -> DIGIT FIVE
+    '6'         #  0xF6 -> DIGIT SIX
+    '7'         #  0xF7 -> DIGIT SEVEN
+    '8'         #  0xF8 -> DIGIT EIGHT
+    '9'         #  0xF9 -> DIGIT NINE
+    '\xb3'      #  0xFA -> SUPERSCRIPT THREE
+    '\xdb'      #  0xFB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    ']'         #  0xFC -> RIGHT SQUARE BRACKET
+    '\xd9'      #  0xFD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'      #  0xFE -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\x9f'      #  0xFF -> APPLICATION PROGRAM COMMAND (APC)
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp424.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp424.py
new file mode 100644
index 0000000000000000000000000000000000000000..6753daf122df44ab9a4fb28b4fc493e2a521ddde
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp424.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp424 generated from 'MAPPINGS/VENDORS/MISC/CP424.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp424',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> SELECT
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> REQUIRED NEW LINE
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> GRAPHIC ESCAPE
+    '\x8d'     #  0x09 -> SUPERSCRIPT
+    '\x8e'     #  0x0A -> REPEAT
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> RESTORE/ENABLE PRESENTATION
+    '\x85'     #  0x15 -> NEW LINE
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> PROGRAM OPERATOR COMMUNICATION
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> UNIT BACK SPACE
+    '\x8f'     #  0x1B -> CUSTOMER USE ONE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> DIGIT SELECT
+    '\x81'     #  0x21 -> START OF SIGNIFICANCE
+    '\x82'     #  0x22 -> FIELD SEPARATOR
+    '\x83'     #  0x23 -> WORD UNDERSCORE
+    '\x84'     #  0x24 -> BYPASS OR INHIBIT PRESENTATION
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> SET ATTRIBUTE
+    '\x89'     #  0x29 -> START FIELD EXTENDED
+    '\x8a'     #  0x2A -> SET MODE OR SWITCH
+    '\x8b'     #  0x2B -> CONTROL SEQUENCE PREFIX
+    '\x8c'     #  0x2C -> MODIFY FIELD ATTRIBUTE
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> <reserved>
+    '\x91'     #  0x31 -> <reserved>
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> INDEX RETURN
+    '\x94'     #  0x34 -> PRESENTATION POSITION
+    '\x95'     #  0x35 -> TRANSPARENT
+    '\x96'     #  0x36 -> NUMERIC BACKSPACE
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> SUBSCRIPT
+    '\x99'     #  0x39 -> INDENT TABULATION
+    '\x9a'     #  0x3A -> REVERSE FORM FEED
+    '\x9b'     #  0x3B -> CUSTOMER USE THREE
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> <reserved>
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\u05d0'   #  0x41 -> HEBREW LETTER ALEF
+    '\u05d1'   #  0x42 -> HEBREW LETTER BET
+    '\u05d2'   #  0x43 -> HEBREW LETTER GIMEL
+    '\u05d3'   #  0x44 -> HEBREW LETTER DALET
+    '\u05d4'   #  0x45 -> HEBREW LETTER HE
+    '\u05d5'   #  0x46 -> HEBREW LETTER VAV
+    '\u05d6'   #  0x47 -> HEBREW LETTER ZAYIN
+    '\u05d7'   #  0x48 -> HEBREW LETTER HET
+    '\u05d8'   #  0x49 -> HEBREW LETTER TET
+    '\xa2'     #  0x4A -> CENT SIGN
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '|'        #  0x4F -> VERTICAL LINE
+    '&'        #  0x50 -> AMPERSAND
+    '\u05d9'   #  0x51 -> HEBREW LETTER YOD
+    '\u05da'   #  0x52 -> HEBREW LETTER FINAL KAF
+    '\u05db'   #  0x53 -> HEBREW LETTER KAF
+    '\u05dc'   #  0x54 -> HEBREW LETTER LAMED
+    '\u05dd'   #  0x55 -> HEBREW LETTER FINAL MEM
+    '\u05de'   #  0x56 -> HEBREW LETTER MEM
+    '\u05df'   #  0x57 -> HEBREW LETTER FINAL NUN
+    '\u05e0'   #  0x58 -> HEBREW LETTER NUN
+    '\u05e1'   #  0x59 -> HEBREW LETTER SAMEKH
+    '!'        #  0x5A -> EXCLAMATION MARK
+    '$'        #  0x5B -> DOLLAR SIGN
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '\xac'     #  0x5F -> NOT SIGN
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\u05e2'   #  0x62 -> HEBREW LETTER AYIN
+    '\u05e3'   #  0x63 -> HEBREW LETTER FINAL PE
+    '\u05e4'   #  0x64 -> HEBREW LETTER PE
+    '\u05e5'   #  0x65 -> HEBREW LETTER FINAL TSADI
+    '\u05e6'   #  0x66 -> HEBREW LETTER TSADI
+    '\u05e7'   #  0x67 -> HEBREW LETTER QOF
+    '\u05e8'   #  0x68 -> HEBREW LETTER RESH
+    '\u05e9'   #  0x69 -> HEBREW LETTER SHIN
+    '\xa6'     #  0x6A -> BROKEN BAR
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\ufffe'   #  0x70 -> UNDEFINED
+    '\u05ea'   #  0x71 -> HEBREW LETTER TAV
+    '\ufffe'   #  0x72 -> UNDEFINED
+    '\ufffe'   #  0x73 -> UNDEFINED
+    '\xa0'     #  0x74 -> NO-BREAK SPACE
+    '\ufffe'   #  0x75 -> UNDEFINED
+    '\ufffe'   #  0x76 -> UNDEFINED
+    '\ufffe'   #  0x77 -> UNDEFINED
+    '\u2017'   #  0x78 -> DOUBLE LOW LINE
+    '`'        #  0x79 -> GRAVE ACCENT
+    ':'        #  0x7A -> COLON
+    '#'        #  0x7B -> NUMBER SIGN
+    '@'        #  0x7C -> COMMERCIAL AT
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '"'        #  0x7F -> QUOTATION MARK
+    '\ufffe'   #  0x80 -> UNDEFINED
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\xab'     #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\ufffe'   #  0x8C -> UNDEFINED
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\xb1'     #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\ufffe'   #  0x9B -> UNDEFINED
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\xb8'     #  0x9D -> CEDILLA
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\xa4'     #  0x9F -> CURRENCY SIGN
+    '\xb5'     #  0xA0 -> MICRO SIGN
+    '~'        #  0xA1 -> TILDE
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\ufffe'   #  0xAA -> UNDEFINED
+    '\ufffe'   #  0xAB -> UNDEFINED
+    '\ufffe'   #  0xAC -> UNDEFINED
+    '\ufffe'   #  0xAD -> UNDEFINED
+    '\ufffe'   #  0xAE -> UNDEFINED
+    '\xae'     #  0xAF -> REGISTERED SIGN
+    '^'        #  0xB0 -> CIRCUMFLEX ACCENT
+    '\xa3'     #  0xB1 -> POUND SIGN
+    '\xa5'     #  0xB2 -> YEN SIGN
+    '\xb7'     #  0xB3 -> MIDDLE DOT
+    '\xa9'     #  0xB4 -> COPYRIGHT SIGN
+    '\xa7'     #  0xB5 -> SECTION SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xbc'     #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '['        #  0xBA -> LEFT SQUARE BRACKET
+    ']'        #  0xBB -> RIGHT SQUARE BRACKET
+    '\xaf'     #  0xBC -> MACRON
+    '\xa8'     #  0xBD -> DIAERESIS
+    '\xb4'     #  0xBE -> ACUTE ACCENT
+    '\xd7'     #  0xBF -> MULTIPLICATION SIGN
+    '{'        #  0xC0 -> LEFT CURLY BRACKET
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\ufffe'   #  0xCB -> UNDEFINED
+    '\ufffe'   #  0xCC -> UNDEFINED
+    '\ufffe'   #  0xCD -> UNDEFINED
+    '\ufffe'   #  0xCE -> UNDEFINED
+    '\ufffe'   #  0xCF -> UNDEFINED
+    '}'        #  0xD0 -> RIGHT CURLY BRACKET
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'     #  0xDA -> SUPERSCRIPT ONE
+    '\ufffe'   #  0xDB -> UNDEFINED
+    '\ufffe'   #  0xDC -> UNDEFINED
+    '\ufffe'   #  0xDD -> UNDEFINED
+    '\ufffe'   #  0xDE -> UNDEFINED
+    '\ufffe'   #  0xDF -> UNDEFINED
+    '\\'       #  0xE0 -> REVERSE SOLIDUS
+    '\xf7'     #  0xE1 -> DIVISION SIGN
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\ufffe'   #  0xEB -> UNDEFINED
+    '\ufffe'   #  0xEC -> UNDEFINED
+    '\ufffe'   #  0xED -> UNDEFINED
+    '\ufffe'   #  0xEE -> UNDEFINED
+    '\ufffe'   #  0xEF -> UNDEFINED
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\ufffe'   #  0xFB -> UNDEFINED
+    '\ufffe'   #  0xFC -> UNDEFINED
+    '\ufffe'   #  0xFD -> UNDEFINED
+    '\ufffe'   #  0xFE -> UNDEFINED
+    '\x9f'     #  0xFF -> EIGHT ONES
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp437.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp437.py
new file mode 100644
index 0000000000000000000000000000000000000000..b6c75e2ca1c897d563bd329ca2881d167abf5f12
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp437.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec cp437 generated from 'VENDORS/MICSFT/PC/CP437.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp437',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00ff,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00a2,     #  CENT SIGN
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00a5,     #  YEN SIGN
+    0x009e: 0x20a7,     #  PESETA SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x2310,     #  REVERSED NOT SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xec'     #  0x008d -> LATIN SMALL LETTER I WITH GRAVE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xff'     #  0x0098 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xa2'     #  0x009b -> CENT SIGN
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xa5'     #  0x009d -> YEN SIGN
+    '\u20a7'   #  0x009e -> PESETA SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\u2310'   #  0x00a9 -> REVERSED NOT SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x009b,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a5: 0x009d,     #  YEN SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ec: 0x008d,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00ff: 0x0098,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x20a7: 0x009e,     #  PESETA SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2310: 0x00a9,     #  REVERSED NOT SIGN
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp500.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp500.py
new file mode 100644
index 0000000000000000000000000000000000000000..5f61535f82aa991eb8dd8940df7e92e9a4db5763
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp500.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp500 generated from 'MAPPINGS/VENDORS/MICSFT/EBCDIC/CP500.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp500',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> CONTROL
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> CONTROL
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> CONTROL
+    '\x8d'     #  0x09 -> CONTROL
+    '\x8e'     #  0x0A -> CONTROL
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> CONTROL
+    '\x85'     #  0x15 -> CONTROL
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> CONTROL
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> CONTROL
+    '\x8f'     #  0x1B -> CONTROL
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> CONTROL
+    '\x81'     #  0x21 -> CONTROL
+    '\x82'     #  0x22 -> CONTROL
+    '\x83'     #  0x23 -> CONTROL
+    '\x84'     #  0x24 -> CONTROL
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> CONTROL
+    '\x89'     #  0x29 -> CONTROL
+    '\x8a'     #  0x2A -> CONTROL
+    '\x8b'     #  0x2B -> CONTROL
+    '\x8c'     #  0x2C -> CONTROL
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> CONTROL
+    '\x91'     #  0x31 -> CONTROL
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> CONTROL
+    '\x94'     #  0x34 -> CONTROL
+    '\x95'     #  0x35 -> CONTROL
+    '\x96'     #  0x36 -> CONTROL
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> CONTROL
+    '\x99'     #  0x39 -> CONTROL
+    '\x9a'     #  0x3A -> CONTROL
+    '\x9b'     #  0x3B -> CONTROL
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> CONTROL
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\xa0'     #  0x41 -> NO-BREAK SPACE
+    '\xe2'     #  0x42 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x43 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x44 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0x45 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe3'     #  0x46 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x47 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x48 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xf1'     #  0x49 -> LATIN SMALL LETTER N WITH TILDE
+    '['        #  0x4A -> LEFT SQUARE BRACKET
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '!'        #  0x4F -> EXCLAMATION MARK
+    '&'        #  0x50 -> AMPERSAND
+    '\xe9'     #  0x51 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0x52 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x53 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x54 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xed'     #  0x55 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0x56 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x57 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xec'     #  0x58 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xdf'     #  0x59 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    ']'        #  0x5A -> RIGHT SQUARE BRACKET
+    '$'        #  0x5B -> DOLLAR SIGN
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '^'        #  0x5F -> CIRCUMFLEX ACCENT
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\xc2'     #  0x62 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc4'     #  0x63 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc0'     #  0x64 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0x65 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'     #  0x66 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc5'     #  0x67 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x68 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xd1'     #  0x69 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xa6'     #  0x6A -> BROKEN BAR
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\xf8'     #  0x70 -> LATIN SMALL LETTER O WITH STROKE
+    '\xc9'     #  0x71 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0x72 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x73 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x74 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0x75 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x76 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x77 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0x78 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '`'        #  0x79 -> GRAVE ACCENT
+    ':'        #  0x7A -> COLON
+    '#'        #  0x7B -> NUMBER SIGN
+    '@'        #  0x7C -> COMMERCIAL AT
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '"'        #  0x7F -> QUOTATION MARK
+    '\xd8'     #  0x80 -> LATIN CAPITAL LETTER O WITH STROKE
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\xab'     #  0x8A -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x8B -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xf0'     #  0x8C -> LATIN SMALL LETTER ETH (ICELANDIC)
+    '\xfd'     #  0x8D -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0x8E -> LATIN SMALL LETTER THORN (ICELANDIC)
+    '\xb1'     #  0x8F -> PLUS-MINUS SIGN
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\xaa'     #  0x9A -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x9B -> MASCULINE ORDINAL INDICATOR
+    '\xe6'     #  0x9C -> LATIN SMALL LIGATURE AE
+    '\xb8'     #  0x9D -> CEDILLA
+    '\xc6'     #  0x9E -> LATIN CAPITAL LIGATURE AE
+    '\xa4'     #  0x9F -> CURRENCY SIGN
+    '\xb5'     #  0xA0 -> MICRO SIGN
+    '~'        #  0xA1 -> TILDE
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\xa1'     #  0xAA -> INVERTED EXCLAMATION MARK
+    '\xbf'     #  0xAB -> INVERTED QUESTION MARK
+    '\xd0'     #  0xAC -> LATIN CAPITAL LETTER ETH (ICELANDIC)
+    '\xdd'     #  0xAD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xAE -> LATIN CAPITAL LETTER THORN (ICELANDIC)
+    '\xae'     #  0xAF -> REGISTERED SIGN
+    '\xa2'     #  0xB0 -> CENT SIGN
+    '\xa3'     #  0xB1 -> POUND SIGN
+    '\xa5'     #  0xB2 -> YEN SIGN
+    '\xb7'     #  0xB3 -> MIDDLE DOT
+    '\xa9'     #  0xB4 -> COPYRIGHT SIGN
+    '\xa7'     #  0xB5 -> SECTION SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xbc'     #  0xB7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xB8 -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xB9 -> VULGAR FRACTION THREE QUARTERS
+    '\xac'     #  0xBA -> NOT SIGN
+    '|'        #  0xBB -> VERTICAL LINE
+    '\xaf'     #  0xBC -> MACRON
+    '\xa8'     #  0xBD -> DIAERESIS
+    '\xb4'     #  0xBE -> ACUTE ACCENT
+    '\xd7'     #  0xBF -> MULTIPLICATION SIGN
+    '{'        #  0xC0 -> LEFT CURLY BRACKET
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\xf4'     #  0xCB -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0xCC -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0xCD -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xCE -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf5'     #  0xCF -> LATIN SMALL LETTER O WITH TILDE
+    '}'        #  0xD0 -> RIGHT CURLY BRACKET
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb9'     #  0xDA -> SUPERSCRIPT ONE
+    '\xfb'     #  0xDB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xDC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xf9'     #  0xDD -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xDE -> LATIN SMALL LETTER U WITH ACUTE
+    '\xff'     #  0xDF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\\'       #  0xE0 -> REVERSE SOLIDUS
+    '\xf7'     #  0xE1 -> DIVISION SIGN
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\xd4'     #  0xEB -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd6'     #  0xEC -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd2'     #  0xED -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd5'     #  0xEF -> LATIN CAPITAL LETTER O WITH TILDE
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\xdb'     #  0xFB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xFC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xd9'     #  0xFD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xFE -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\x9f'     #  0xFF -> CONTROL
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp720.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp720.py
new file mode 100644
index 0000000000000000000000000000000000000000..96d609616c4d28e290f1a4d711dc8e4033ff90f2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp720.py
@@ -0,0 +1,309 @@
+"""Python Character Mapping Codec cp720 generated on Windows:
+Vista 6.0.6002 SP2 Multiprocessor Free with the command:
+  python Tools/unicode/genwincodec.py 720
+"""#"
+
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp720',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'      #  0x00 -> CONTROL CHARACTER
+    '\x01'      #  0x01 -> CONTROL CHARACTER
+    '\x02'      #  0x02 -> CONTROL CHARACTER
+    '\x03'      #  0x03 -> CONTROL CHARACTER
+    '\x04'      #  0x04 -> CONTROL CHARACTER
+    '\x05'      #  0x05 -> CONTROL CHARACTER
+    '\x06'      #  0x06 -> CONTROL CHARACTER
+    '\x07'      #  0x07 -> CONTROL CHARACTER
+    '\x08'      #  0x08 -> CONTROL CHARACTER
+    '\t'        #  0x09 -> CONTROL CHARACTER
+    '\n'        #  0x0A -> CONTROL CHARACTER
+    '\x0b'      #  0x0B -> CONTROL CHARACTER
+    '\x0c'      #  0x0C -> CONTROL CHARACTER
+    '\r'        #  0x0D -> CONTROL CHARACTER
+    '\x0e'      #  0x0E -> CONTROL CHARACTER
+    '\x0f'      #  0x0F -> CONTROL CHARACTER
+    '\x10'      #  0x10 -> CONTROL CHARACTER
+    '\x11'      #  0x11 -> CONTROL CHARACTER
+    '\x12'      #  0x12 -> CONTROL CHARACTER
+    '\x13'      #  0x13 -> CONTROL CHARACTER
+    '\x14'      #  0x14 -> CONTROL CHARACTER
+    '\x15'      #  0x15 -> CONTROL CHARACTER
+    '\x16'      #  0x16 -> CONTROL CHARACTER
+    '\x17'      #  0x17 -> CONTROL CHARACTER
+    '\x18'      #  0x18 -> CONTROL CHARACTER
+    '\x19'      #  0x19 -> CONTROL CHARACTER
+    '\x1a'      #  0x1A -> CONTROL CHARACTER
+    '\x1b'      #  0x1B -> CONTROL CHARACTER
+    '\x1c'      #  0x1C -> CONTROL CHARACTER
+    '\x1d'      #  0x1D -> CONTROL CHARACTER
+    '\x1e'      #  0x1E -> CONTROL CHARACTER
+    '\x1f'      #  0x1F -> CONTROL CHARACTER
+    ' '         #  0x20 -> SPACE
+    '!'         #  0x21 -> EXCLAMATION MARK
+    '"'         #  0x22 -> QUOTATION MARK
+    '#'         #  0x23 -> NUMBER SIGN
+    '$'         #  0x24 -> DOLLAR SIGN
+    '%'         #  0x25 -> PERCENT SIGN
+    '&'         #  0x26 -> AMPERSAND
+    "'"         #  0x27 -> APOSTROPHE
+    '('         #  0x28 -> LEFT PARENTHESIS
+    ')'         #  0x29 -> RIGHT PARENTHESIS
+    '*'         #  0x2A -> ASTERISK
+    '+'         #  0x2B -> PLUS SIGN
+    ','         #  0x2C -> COMMA
+    '-'         #  0x2D -> HYPHEN-MINUS
+    '.'         #  0x2E -> FULL STOP
+    '/'         #  0x2F -> SOLIDUS
+    '0'         #  0x30 -> DIGIT ZERO
+    '1'         #  0x31 -> DIGIT ONE
+    '2'         #  0x32 -> DIGIT TWO
+    '3'         #  0x33 -> DIGIT THREE
+    '4'         #  0x34 -> DIGIT FOUR
+    '5'         #  0x35 -> DIGIT FIVE
+    '6'         #  0x36 -> DIGIT SIX
+    '7'         #  0x37 -> DIGIT SEVEN
+    '8'         #  0x38 -> DIGIT EIGHT
+    '9'         #  0x39 -> DIGIT NINE
+    ':'         #  0x3A -> COLON
+    ';'         #  0x3B -> SEMICOLON
+    '<'         #  0x3C -> LESS-THAN SIGN
+    '='         #  0x3D -> EQUALS SIGN
+    '>'         #  0x3E -> GREATER-THAN SIGN
+    '?'         #  0x3F -> QUESTION MARK
+    '@'         #  0x40 -> COMMERCIAL AT
+    'A'         #  0x41 -> LATIN CAPITAL LETTER A
+    'B'         #  0x42 -> LATIN CAPITAL LETTER B
+    'C'         #  0x43 -> LATIN CAPITAL LETTER C
+    'D'         #  0x44 -> LATIN CAPITAL LETTER D
+    'E'         #  0x45 -> LATIN CAPITAL LETTER E
+    'F'         #  0x46 -> LATIN CAPITAL LETTER F
+    'G'         #  0x47 -> LATIN CAPITAL LETTER G
+    'H'         #  0x48 -> LATIN CAPITAL LETTER H
+    'I'         #  0x49 -> LATIN CAPITAL LETTER I
+    'J'         #  0x4A -> LATIN CAPITAL LETTER J
+    'K'         #  0x4B -> LATIN CAPITAL LETTER K
+    'L'         #  0x4C -> LATIN CAPITAL LETTER L
+    'M'         #  0x4D -> LATIN CAPITAL LETTER M
+    'N'         #  0x4E -> LATIN CAPITAL LETTER N
+    'O'         #  0x4F -> LATIN CAPITAL LETTER O
+    'P'         #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'         #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'         #  0x52 -> LATIN CAPITAL LETTER R
+    'S'         #  0x53 -> LATIN CAPITAL LETTER S
+    'T'         #  0x54 -> LATIN CAPITAL LETTER T
+    'U'         #  0x55 -> LATIN CAPITAL LETTER U
+    'V'         #  0x56 -> LATIN CAPITAL LETTER V
+    'W'         #  0x57 -> LATIN CAPITAL LETTER W
+    'X'         #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'         #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'         #  0x5A -> LATIN CAPITAL LETTER Z
+    '['         #  0x5B -> LEFT SQUARE BRACKET
+    '\\'        #  0x5C -> REVERSE SOLIDUS
+    ']'         #  0x5D -> RIGHT SQUARE BRACKET
+    '^'         #  0x5E -> CIRCUMFLEX ACCENT
+    '_'         #  0x5F -> LOW LINE
+    '`'         #  0x60 -> GRAVE ACCENT
+    'a'         #  0x61 -> LATIN SMALL LETTER A
+    'b'         #  0x62 -> LATIN SMALL LETTER B
+    'c'         #  0x63 -> LATIN SMALL LETTER C
+    'd'         #  0x64 -> LATIN SMALL LETTER D
+    'e'         #  0x65 -> LATIN SMALL LETTER E
+    'f'         #  0x66 -> LATIN SMALL LETTER F
+    'g'         #  0x67 -> LATIN SMALL LETTER G
+    'h'         #  0x68 -> LATIN SMALL LETTER H
+    'i'         #  0x69 -> LATIN SMALL LETTER I
+    'j'         #  0x6A -> LATIN SMALL LETTER J
+    'k'         #  0x6B -> LATIN SMALL LETTER K
+    'l'         #  0x6C -> LATIN SMALL LETTER L
+    'm'         #  0x6D -> LATIN SMALL LETTER M
+    'n'         #  0x6E -> LATIN SMALL LETTER N
+    'o'         #  0x6F -> LATIN SMALL LETTER O
+    'p'         #  0x70 -> LATIN SMALL LETTER P
+    'q'         #  0x71 -> LATIN SMALL LETTER Q
+    'r'         #  0x72 -> LATIN SMALL LETTER R
+    's'         #  0x73 -> LATIN SMALL LETTER S
+    't'         #  0x74 -> LATIN SMALL LETTER T
+    'u'         #  0x75 -> LATIN SMALL LETTER U
+    'v'         #  0x76 -> LATIN SMALL LETTER V
+    'w'         #  0x77 -> LATIN SMALL LETTER W
+    'x'         #  0x78 -> LATIN SMALL LETTER X
+    'y'         #  0x79 -> LATIN SMALL LETTER Y
+    'z'         #  0x7A -> LATIN SMALL LETTER Z
+    '{'         #  0x7B -> LEFT CURLY BRACKET
+    '|'         #  0x7C -> VERTICAL LINE
+    '}'         #  0x7D -> RIGHT CURLY BRACKET
+    '~'         #  0x7E -> TILDE
+    '\x7f'      #  0x7F -> CONTROL CHARACTER
+    '\x80'
+    '\x81'
+    '\xe9'      #  0x82 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'      #  0x83 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\x84'
+    '\xe0'      #  0x85 -> LATIN SMALL LETTER A WITH GRAVE
+    '\x86'
+    '\xe7'      #  0x87 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'      #  0x88 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'      #  0x89 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'      #  0x8A -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'      #  0x8B -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'      #  0x8C -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\x8d'
+    '\x8e'
+    '\x8f'
+    '\x90'
+    '\u0651'    #  0x91 -> ARABIC SHADDA
+    '\u0652'    #  0x92 -> ARABIC SUKUN
+    '\xf4'      #  0x93 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xa4'      #  0x94 -> CURRENCY SIGN
+    '\u0640'    #  0x95 -> ARABIC TATWEEL
+    '\xfb'      #  0x96 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'      #  0x97 -> LATIN SMALL LETTER U WITH GRAVE
+    '\u0621'    #  0x98 -> ARABIC LETTER HAMZA
+    '\u0622'    #  0x99 -> ARABIC LETTER ALEF WITH MADDA ABOVE
+    '\u0623'    #  0x9A -> ARABIC LETTER ALEF WITH HAMZA ABOVE
+    '\u0624'    #  0x9B -> ARABIC LETTER WAW WITH HAMZA ABOVE
+    '\xa3'      #  0x9C -> POUND SIGN
+    '\u0625'    #  0x9D -> ARABIC LETTER ALEF WITH HAMZA BELOW
+    '\u0626'    #  0x9E -> ARABIC LETTER YEH WITH HAMZA ABOVE
+    '\u0627'    #  0x9F -> ARABIC LETTER ALEF
+    '\u0628'    #  0xA0 -> ARABIC LETTER BEH
+    '\u0629'    #  0xA1 -> ARABIC LETTER TEH MARBUTA
+    '\u062a'    #  0xA2 -> ARABIC LETTER TEH
+    '\u062b'    #  0xA3 -> ARABIC LETTER THEH
+    '\u062c'    #  0xA4 -> ARABIC LETTER JEEM
+    '\u062d'    #  0xA5 -> ARABIC LETTER HAH
+    '\u062e'    #  0xA6 -> ARABIC LETTER KHAH
+    '\u062f'    #  0xA7 -> ARABIC LETTER DAL
+    '\u0630'    #  0xA8 -> ARABIC LETTER THAL
+    '\u0631'    #  0xA9 -> ARABIC LETTER REH
+    '\u0632'    #  0xAA -> ARABIC LETTER ZAIN
+    '\u0633'    #  0xAB -> ARABIC LETTER SEEN
+    '\u0634'    #  0xAC -> ARABIC LETTER SHEEN
+    '\u0635'    #  0xAD -> ARABIC LETTER SAD
+    '\xab'      #  0xAE -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'      #  0xAF -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'    #  0xB0 -> LIGHT SHADE
+    '\u2592'    #  0xB1 -> MEDIUM SHADE
+    '\u2593'    #  0xB2 -> DARK SHADE
+    '\u2502'    #  0xB3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'    #  0xB4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'    #  0xB5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'    #  0xB6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'    #  0xB7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'    #  0xB8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'    #  0xB9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'    #  0xBA -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'    #  0xBB -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'    #  0xBC -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'    #  0xBD -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'    #  0xBE -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'    #  0xBF -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'    #  0xC0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'    #  0xC1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'    #  0xC2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'    #  0xC3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'    #  0xC4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'    #  0xC5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'    #  0xC6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'    #  0xC7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'    #  0xC8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'    #  0xC9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'    #  0xCA -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'    #  0xCB -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'    #  0xCC -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'    #  0xCD -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'    #  0xCE -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'    #  0xCF -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'    #  0xD0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'    #  0xD1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'    #  0xD2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'    #  0xD3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'    #  0xD4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'    #  0xD5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'    #  0xD6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'    #  0xD7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'    #  0xD8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'    #  0xD9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'    #  0xDA -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'    #  0xDB -> FULL BLOCK
+    '\u2584'    #  0xDC -> LOWER HALF BLOCK
+    '\u258c'    #  0xDD -> LEFT HALF BLOCK
+    '\u2590'    #  0xDE -> RIGHT HALF BLOCK
+    '\u2580'    #  0xDF -> UPPER HALF BLOCK
+    '\u0636'    #  0xE0 -> ARABIC LETTER DAD
+    '\u0637'    #  0xE1 -> ARABIC LETTER TAH
+    '\u0638'    #  0xE2 -> ARABIC LETTER ZAH
+    '\u0639'    #  0xE3 -> ARABIC LETTER AIN
+    '\u063a'    #  0xE4 -> ARABIC LETTER GHAIN
+    '\u0641'    #  0xE5 -> ARABIC LETTER FEH
+    '\xb5'      #  0xE6 -> MICRO SIGN
+    '\u0642'    #  0xE7 -> ARABIC LETTER QAF
+    '\u0643'    #  0xE8 -> ARABIC LETTER KAF
+    '\u0644'    #  0xE9 -> ARABIC LETTER LAM
+    '\u0645'    #  0xEA -> ARABIC LETTER MEEM
+    '\u0646'    #  0xEB -> ARABIC LETTER NOON
+    '\u0647'    #  0xEC -> ARABIC LETTER HEH
+    '\u0648'    #  0xED -> ARABIC LETTER WAW
+    '\u0649'    #  0xEE -> ARABIC LETTER ALEF MAKSURA
+    '\u064a'    #  0xEF -> ARABIC LETTER YEH
+    '\u2261'    #  0xF0 -> IDENTICAL TO
+    '\u064b'    #  0xF1 -> ARABIC FATHATAN
+    '\u064c'    #  0xF2 -> ARABIC DAMMATAN
+    '\u064d'    #  0xF3 -> ARABIC KASRATAN
+    '\u064e'    #  0xF4 -> ARABIC FATHA
+    '\u064f'    #  0xF5 -> ARABIC DAMMA
+    '\u0650'    #  0xF6 -> ARABIC KASRA
+    '\u2248'    #  0xF7 -> ALMOST EQUAL TO
+    '\xb0'      #  0xF8 -> DEGREE SIGN
+    '\u2219'    #  0xF9 -> BULLET OPERATOR
+    '\xb7'      #  0xFA -> MIDDLE DOT
+    '\u221a'    #  0xFB -> SQUARE ROOT
+    '\u207f'    #  0xFC -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'      #  0xFD -> SUPERSCRIPT TWO
+    '\u25a0'    #  0xFE -> BLACK SQUARE
+    '\xa0'      #  0xFF -> NO-BREAK SPACE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp737.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp737.py
new file mode 100644
index 0000000000000000000000000000000000000000..9685bae75b36ccc300422966620e51955a756d5b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp737.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec cp737 generated from 'VENDORS/MICSFT/PC/CP737.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp737',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x0391,     #  GREEK CAPITAL LETTER ALPHA
+    0x0081: 0x0392,     #  GREEK CAPITAL LETTER BETA
+    0x0082: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x0083: 0x0394,     #  GREEK CAPITAL LETTER DELTA
+    0x0084: 0x0395,     #  GREEK CAPITAL LETTER EPSILON
+    0x0085: 0x0396,     #  GREEK CAPITAL LETTER ZETA
+    0x0086: 0x0397,     #  GREEK CAPITAL LETTER ETA
+    0x0087: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x0088: 0x0399,     #  GREEK CAPITAL LETTER IOTA
+    0x0089: 0x039a,     #  GREEK CAPITAL LETTER KAPPA
+    0x008a: 0x039b,     #  GREEK CAPITAL LETTER LAMDA
+    0x008b: 0x039c,     #  GREEK CAPITAL LETTER MU
+    0x008c: 0x039d,     #  GREEK CAPITAL LETTER NU
+    0x008d: 0x039e,     #  GREEK CAPITAL LETTER XI
+    0x008e: 0x039f,     #  GREEK CAPITAL LETTER OMICRON
+    0x008f: 0x03a0,     #  GREEK CAPITAL LETTER PI
+    0x0090: 0x03a1,     #  GREEK CAPITAL LETTER RHO
+    0x0091: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x0092: 0x03a4,     #  GREEK CAPITAL LETTER TAU
+    0x0093: 0x03a5,     #  GREEK CAPITAL LETTER UPSILON
+    0x0094: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x0095: 0x03a7,     #  GREEK CAPITAL LETTER CHI
+    0x0096: 0x03a8,     #  GREEK CAPITAL LETTER PSI
+    0x0097: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x0098: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x0099: 0x03b2,     #  GREEK SMALL LETTER BETA
+    0x009a: 0x03b3,     #  GREEK SMALL LETTER GAMMA
+    0x009b: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x009c: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x009d: 0x03b6,     #  GREEK SMALL LETTER ZETA
+    0x009e: 0x03b7,     #  GREEK SMALL LETTER ETA
+    0x009f: 0x03b8,     #  GREEK SMALL LETTER THETA
+    0x00a0: 0x03b9,     #  GREEK SMALL LETTER IOTA
+    0x00a1: 0x03ba,     #  GREEK SMALL LETTER KAPPA
+    0x00a2: 0x03bb,     #  GREEK SMALL LETTER LAMDA
+    0x00a3: 0x03bc,     #  GREEK SMALL LETTER MU
+    0x00a4: 0x03bd,     #  GREEK SMALL LETTER NU
+    0x00a5: 0x03be,     #  GREEK SMALL LETTER XI
+    0x00a6: 0x03bf,     #  GREEK SMALL LETTER OMICRON
+    0x00a7: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00a8: 0x03c1,     #  GREEK SMALL LETTER RHO
+    0x00a9: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00aa: 0x03c2,     #  GREEK SMALL LETTER FINAL SIGMA
+    0x00ab: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00ac: 0x03c5,     #  GREEK SMALL LETTER UPSILON
+    0x00ad: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ae: 0x03c7,     #  GREEK SMALL LETTER CHI
+    0x00af: 0x03c8,     #  GREEK SMALL LETTER PSI
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03c9,     #  GREEK SMALL LETTER OMEGA
+    0x00e1: 0x03ac,     #  GREEK SMALL LETTER ALPHA WITH TONOS
+    0x00e2: 0x03ad,     #  GREEK SMALL LETTER EPSILON WITH TONOS
+    0x00e3: 0x03ae,     #  GREEK SMALL LETTER ETA WITH TONOS
+    0x00e4: 0x03ca,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    0x00e5: 0x03af,     #  GREEK SMALL LETTER IOTA WITH TONOS
+    0x00e6: 0x03cc,     #  GREEK SMALL LETTER OMICRON WITH TONOS
+    0x00e7: 0x03cd,     #  GREEK SMALL LETTER UPSILON WITH TONOS
+    0x00e8: 0x03cb,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    0x00e9: 0x03ce,     #  GREEK SMALL LETTER OMEGA WITH TONOS
+    0x00ea: 0x0386,     #  GREEK CAPITAL LETTER ALPHA WITH TONOS
+    0x00eb: 0x0388,     #  GREEK CAPITAL LETTER EPSILON WITH TONOS
+    0x00ec: 0x0389,     #  GREEK CAPITAL LETTER ETA WITH TONOS
+    0x00ed: 0x038a,     #  GREEK CAPITAL LETTER IOTA WITH TONOS
+    0x00ee: 0x038c,     #  GREEK CAPITAL LETTER OMICRON WITH TONOS
+    0x00ef: 0x038e,     #  GREEK CAPITAL LETTER UPSILON WITH TONOS
+    0x00f0: 0x038f,     #  GREEK CAPITAL LETTER OMEGA WITH TONOS
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x03aa,     #  GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    0x00f5: 0x03ab,     #  GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u0391'   #  0x0080 -> GREEK CAPITAL LETTER ALPHA
+    '\u0392'   #  0x0081 -> GREEK CAPITAL LETTER BETA
+    '\u0393'   #  0x0082 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0x0083 -> GREEK CAPITAL LETTER DELTA
+    '\u0395'   #  0x0084 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0x0085 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0x0086 -> GREEK CAPITAL LETTER ETA
+    '\u0398'   #  0x0087 -> GREEK CAPITAL LETTER THETA
+    '\u0399'   #  0x0088 -> GREEK CAPITAL LETTER IOTA
+    '\u039a'   #  0x0089 -> GREEK CAPITAL LETTER KAPPA
+    '\u039b'   #  0x008a -> GREEK CAPITAL LETTER LAMDA
+    '\u039c'   #  0x008b -> GREEK CAPITAL LETTER MU
+    '\u039d'   #  0x008c -> GREEK CAPITAL LETTER NU
+    '\u039e'   #  0x008d -> GREEK CAPITAL LETTER XI
+    '\u039f'   #  0x008e -> GREEK CAPITAL LETTER OMICRON
+    '\u03a0'   #  0x008f -> GREEK CAPITAL LETTER PI
+    '\u03a1'   #  0x0090 -> GREEK CAPITAL LETTER RHO
+    '\u03a3'   #  0x0091 -> GREEK CAPITAL LETTER SIGMA
+    '\u03a4'   #  0x0092 -> GREEK CAPITAL LETTER TAU
+    '\u03a5'   #  0x0093 -> GREEK CAPITAL LETTER UPSILON
+    '\u03a6'   #  0x0094 -> GREEK CAPITAL LETTER PHI
+    '\u03a7'   #  0x0095 -> GREEK CAPITAL LETTER CHI
+    '\u03a8'   #  0x0096 -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0x0097 -> GREEK CAPITAL LETTER OMEGA
+    '\u03b1'   #  0x0098 -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0x0099 -> GREEK SMALL LETTER BETA
+    '\u03b3'   #  0x009a -> GREEK SMALL LETTER GAMMA
+    '\u03b4'   #  0x009b -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0x009c -> GREEK SMALL LETTER EPSILON
+    '\u03b6'   #  0x009d -> GREEK SMALL LETTER ZETA
+    '\u03b7'   #  0x009e -> GREEK SMALL LETTER ETA
+    '\u03b8'   #  0x009f -> GREEK SMALL LETTER THETA
+    '\u03b9'   #  0x00a0 -> GREEK SMALL LETTER IOTA
+    '\u03ba'   #  0x00a1 -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0x00a2 -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0x00a3 -> GREEK SMALL LETTER MU
+    '\u03bd'   #  0x00a4 -> GREEK SMALL LETTER NU
+    '\u03be'   #  0x00a5 -> GREEK SMALL LETTER XI
+    '\u03bf'   #  0x00a6 -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0x00a7 -> GREEK SMALL LETTER PI
+    '\u03c1'   #  0x00a8 -> GREEK SMALL LETTER RHO
+    '\u03c3'   #  0x00a9 -> GREEK SMALL LETTER SIGMA
+    '\u03c2'   #  0x00aa -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c4'   #  0x00ab -> GREEK SMALL LETTER TAU
+    '\u03c5'   #  0x00ac -> GREEK SMALL LETTER UPSILON
+    '\u03c6'   #  0x00ad -> GREEK SMALL LETTER PHI
+    '\u03c7'   #  0x00ae -> GREEK SMALL LETTER CHI
+    '\u03c8'   #  0x00af -> GREEK SMALL LETTER PSI
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03c9'   #  0x00e0 -> GREEK SMALL LETTER OMEGA
+    '\u03ac'   #  0x00e1 -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\u03ad'   #  0x00e2 -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0x00e3 -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03ca'   #  0x00e4 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u03af'   #  0x00e5 -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03cc'   #  0x00e6 -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u03cd'   #  0x00e7 -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u03cb'   #  0x00e8 -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u03ce'   #  0x00e9 -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\u0386'   #  0x00ea -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\u0388'   #  0x00eb -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u0389'   #  0x00ec -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\u038a'   #  0x00ed -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\u038c'   #  0x00ee -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\u038e'   #  0x00ef -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u038f'   #  0x00f0 -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u03aa'   #  0x00f4 -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\u03ab'   #  0x00f5 -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x0386: 0x00ea,     #  GREEK CAPITAL LETTER ALPHA WITH TONOS
+    0x0388: 0x00eb,     #  GREEK CAPITAL LETTER EPSILON WITH TONOS
+    0x0389: 0x00ec,     #  GREEK CAPITAL LETTER ETA WITH TONOS
+    0x038a: 0x00ed,     #  GREEK CAPITAL LETTER IOTA WITH TONOS
+    0x038c: 0x00ee,     #  GREEK CAPITAL LETTER OMICRON WITH TONOS
+    0x038e: 0x00ef,     #  GREEK CAPITAL LETTER UPSILON WITH TONOS
+    0x038f: 0x00f0,     #  GREEK CAPITAL LETTER OMEGA WITH TONOS
+    0x0391: 0x0080,     #  GREEK CAPITAL LETTER ALPHA
+    0x0392: 0x0081,     #  GREEK CAPITAL LETTER BETA
+    0x0393: 0x0082,     #  GREEK CAPITAL LETTER GAMMA
+    0x0394: 0x0083,     #  GREEK CAPITAL LETTER DELTA
+    0x0395: 0x0084,     #  GREEK CAPITAL LETTER EPSILON
+    0x0396: 0x0085,     #  GREEK CAPITAL LETTER ZETA
+    0x0397: 0x0086,     #  GREEK CAPITAL LETTER ETA
+    0x0398: 0x0087,     #  GREEK CAPITAL LETTER THETA
+    0x0399: 0x0088,     #  GREEK CAPITAL LETTER IOTA
+    0x039a: 0x0089,     #  GREEK CAPITAL LETTER KAPPA
+    0x039b: 0x008a,     #  GREEK CAPITAL LETTER LAMDA
+    0x039c: 0x008b,     #  GREEK CAPITAL LETTER MU
+    0x039d: 0x008c,     #  GREEK CAPITAL LETTER NU
+    0x039e: 0x008d,     #  GREEK CAPITAL LETTER XI
+    0x039f: 0x008e,     #  GREEK CAPITAL LETTER OMICRON
+    0x03a0: 0x008f,     #  GREEK CAPITAL LETTER PI
+    0x03a1: 0x0090,     #  GREEK CAPITAL LETTER RHO
+    0x03a3: 0x0091,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a4: 0x0092,     #  GREEK CAPITAL LETTER TAU
+    0x03a5: 0x0093,     #  GREEK CAPITAL LETTER UPSILON
+    0x03a6: 0x0094,     #  GREEK CAPITAL LETTER PHI
+    0x03a7: 0x0095,     #  GREEK CAPITAL LETTER CHI
+    0x03a8: 0x0096,     #  GREEK CAPITAL LETTER PSI
+    0x03a9: 0x0097,     #  GREEK CAPITAL LETTER OMEGA
+    0x03aa: 0x00f4,     #  GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    0x03ab: 0x00f5,     #  GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    0x03ac: 0x00e1,     #  GREEK SMALL LETTER ALPHA WITH TONOS
+    0x03ad: 0x00e2,     #  GREEK SMALL LETTER EPSILON WITH TONOS
+    0x03ae: 0x00e3,     #  GREEK SMALL LETTER ETA WITH TONOS
+    0x03af: 0x00e5,     #  GREEK SMALL LETTER IOTA WITH TONOS
+    0x03b1: 0x0098,     #  GREEK SMALL LETTER ALPHA
+    0x03b2: 0x0099,     #  GREEK SMALL LETTER BETA
+    0x03b3: 0x009a,     #  GREEK SMALL LETTER GAMMA
+    0x03b4: 0x009b,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x009c,     #  GREEK SMALL LETTER EPSILON
+    0x03b6: 0x009d,     #  GREEK SMALL LETTER ZETA
+    0x03b7: 0x009e,     #  GREEK SMALL LETTER ETA
+    0x03b8: 0x009f,     #  GREEK SMALL LETTER THETA
+    0x03b9: 0x00a0,     #  GREEK SMALL LETTER IOTA
+    0x03ba: 0x00a1,     #  GREEK SMALL LETTER KAPPA
+    0x03bb: 0x00a2,     #  GREEK SMALL LETTER LAMDA
+    0x03bc: 0x00a3,     #  GREEK SMALL LETTER MU
+    0x03bd: 0x00a4,     #  GREEK SMALL LETTER NU
+    0x03be: 0x00a5,     #  GREEK SMALL LETTER XI
+    0x03bf: 0x00a6,     #  GREEK SMALL LETTER OMICRON
+    0x03c0: 0x00a7,     #  GREEK SMALL LETTER PI
+    0x03c1: 0x00a8,     #  GREEK SMALL LETTER RHO
+    0x03c2: 0x00aa,     #  GREEK SMALL LETTER FINAL SIGMA
+    0x03c3: 0x00a9,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00ab,     #  GREEK SMALL LETTER TAU
+    0x03c5: 0x00ac,     #  GREEK SMALL LETTER UPSILON
+    0x03c6: 0x00ad,     #  GREEK SMALL LETTER PHI
+    0x03c7: 0x00ae,     #  GREEK SMALL LETTER CHI
+    0x03c8: 0x00af,     #  GREEK SMALL LETTER PSI
+    0x03c9: 0x00e0,     #  GREEK SMALL LETTER OMEGA
+    0x03ca: 0x00e4,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    0x03cb: 0x00e8,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    0x03cc: 0x00e6,     #  GREEK SMALL LETTER OMICRON WITH TONOS
+    0x03cd: 0x00e7,     #  GREEK SMALL LETTER UPSILON WITH TONOS
+    0x03ce: 0x00e9,     #  GREEK SMALL LETTER OMEGA WITH TONOS
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp775.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp775.py
new file mode 100644
index 0000000000000000000000000000000000000000..fe06e7bc3b3dd7707878efc4f134798de4065b27
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp775.py
@@ -0,0 +1,697 @@
+""" Python Character Mapping Codec cp775 generated from 'VENDORS/MICSFT/PC/CP775.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp775',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x0106,     #  LATIN CAPITAL LETTER C WITH ACUTE
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x0101,     #  LATIN SMALL LETTER A WITH MACRON
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x0123,     #  LATIN SMALL LETTER G WITH CEDILLA
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x0107,     #  LATIN SMALL LETTER C WITH ACUTE
+    0x0088: 0x0142,     #  LATIN SMALL LETTER L WITH STROKE
+    0x0089: 0x0113,     #  LATIN SMALL LETTER E WITH MACRON
+    0x008a: 0x0156,     #  LATIN CAPITAL LETTER R WITH CEDILLA
+    0x008b: 0x0157,     #  LATIN SMALL LETTER R WITH CEDILLA
+    0x008c: 0x012b,     #  LATIN SMALL LETTER I WITH MACRON
+    0x008d: 0x0179,     #  LATIN CAPITAL LETTER Z WITH ACUTE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x014d,     #  LATIN SMALL LETTER O WITH MACRON
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x0122,     #  LATIN CAPITAL LETTER G WITH CEDILLA
+    0x0096: 0x00a2,     #  CENT SIGN
+    0x0097: 0x015a,     #  LATIN CAPITAL LETTER S WITH ACUTE
+    0x0098: 0x015b,     #  LATIN SMALL LETTER S WITH ACUTE
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x00d7,     #  MULTIPLICATION SIGN
+    0x009f: 0x00a4,     #  CURRENCY SIGN
+    0x00a0: 0x0100,     #  LATIN CAPITAL LETTER A WITH MACRON
+    0x00a1: 0x012a,     #  LATIN CAPITAL LETTER I WITH MACRON
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x017b,     #  LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    0x00a4: 0x017c,     #  LATIN SMALL LETTER Z WITH DOT ABOVE
+    0x00a5: 0x017a,     #  LATIN SMALL LETTER Z WITH ACUTE
+    0x00a6: 0x201d,     #  RIGHT DOUBLE QUOTATION MARK
+    0x00a7: 0x00a6,     #  BROKEN BAR
+    0x00a8: 0x00a9,     #  COPYRIGHT SIGN
+    0x00a9: 0x00ae,     #  REGISTERED SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x0141,     #  LATIN CAPITAL LETTER L WITH STROKE
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x0104,     #  LATIN CAPITAL LETTER A WITH OGONEK
+    0x00b6: 0x010c,     #  LATIN CAPITAL LETTER C WITH CARON
+    0x00b7: 0x0118,     #  LATIN CAPITAL LETTER E WITH OGONEK
+    0x00b8: 0x0116,     #  LATIN CAPITAL LETTER E WITH DOT ABOVE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x012e,     #  LATIN CAPITAL LETTER I WITH OGONEK
+    0x00be: 0x0160,     #  LATIN CAPITAL LETTER S WITH CARON
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x0172,     #  LATIN CAPITAL LETTER U WITH OGONEK
+    0x00c7: 0x016a,     #  LATIN CAPITAL LETTER U WITH MACRON
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x017d,     #  LATIN CAPITAL LETTER Z WITH CARON
+    0x00d0: 0x0105,     #  LATIN SMALL LETTER A WITH OGONEK
+    0x00d1: 0x010d,     #  LATIN SMALL LETTER C WITH CARON
+    0x00d2: 0x0119,     #  LATIN SMALL LETTER E WITH OGONEK
+    0x00d3: 0x0117,     #  LATIN SMALL LETTER E WITH DOT ABOVE
+    0x00d4: 0x012f,     #  LATIN SMALL LETTER I WITH OGONEK
+    0x00d5: 0x0161,     #  LATIN SMALL LETTER S WITH CARON
+    0x00d6: 0x0173,     #  LATIN SMALL LETTER U WITH OGONEK
+    0x00d7: 0x016b,     #  LATIN SMALL LETTER U WITH MACRON
+    0x00d8: 0x017e,     #  LATIN SMALL LETTER Z WITH CARON
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S (GERMAN)
+    0x00e2: 0x014c,     #  LATIN CAPITAL LETTER O WITH MACRON
+    0x00e3: 0x0143,     #  LATIN CAPITAL LETTER N WITH ACUTE
+    0x00e4: 0x00f5,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00e5: 0x00d5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x0144,     #  LATIN SMALL LETTER N WITH ACUTE
+    0x00e8: 0x0136,     #  LATIN CAPITAL LETTER K WITH CEDILLA
+    0x00e9: 0x0137,     #  LATIN SMALL LETTER K WITH CEDILLA
+    0x00ea: 0x013b,     #  LATIN CAPITAL LETTER L WITH CEDILLA
+    0x00eb: 0x013c,     #  LATIN SMALL LETTER L WITH CEDILLA
+    0x00ec: 0x0146,     #  LATIN SMALL LETTER N WITH CEDILLA
+    0x00ed: 0x0112,     #  LATIN CAPITAL LETTER E WITH MACRON
+    0x00ee: 0x0145,     #  LATIN CAPITAL LETTER N WITH CEDILLA
+    0x00ef: 0x2019,     #  RIGHT SINGLE QUOTATION MARK
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x201c,     #  LEFT DOUBLE QUOTATION MARK
+    0x00f3: 0x00be,     #  VULGAR FRACTION THREE QUARTERS
+    0x00f4: 0x00b6,     #  PILCROW SIGN
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x201e,     #  DOUBLE LOW-9 QUOTATION MARK
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x00b9,     #  SUPERSCRIPT ONE
+    0x00fc: 0x00b3,     #  SUPERSCRIPT THREE
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u0106'   #  0x0080 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0101'   #  0x0083 -> LATIN SMALL LETTER A WITH MACRON
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u0123'   #  0x0085 -> LATIN SMALL LETTER G WITH CEDILLA
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\u0107'   #  0x0087 -> LATIN SMALL LETTER C WITH ACUTE
+    '\u0142'   #  0x0088 -> LATIN SMALL LETTER L WITH STROKE
+    '\u0113'   #  0x0089 -> LATIN SMALL LETTER E WITH MACRON
+    '\u0156'   #  0x008a -> LATIN CAPITAL LETTER R WITH CEDILLA
+    '\u0157'   #  0x008b -> LATIN SMALL LETTER R WITH CEDILLA
+    '\u012b'   #  0x008c -> LATIN SMALL LETTER I WITH MACRON
+    '\u0179'   #  0x008d -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\u014d'   #  0x0093 -> LATIN SMALL LETTER O WITH MACRON
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\u0122'   #  0x0095 -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\xa2'     #  0x0096 -> CENT SIGN
+    '\u015a'   #  0x0097 -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u015b'   #  0x0098 -> LATIN SMALL LETTER S WITH ACUTE
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd7'     #  0x009e -> MULTIPLICATION SIGN
+    '\xa4'     #  0x009f -> CURRENCY SIGN
+    '\u0100'   #  0x00a0 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\u012a'   #  0x00a1 -> LATIN CAPITAL LETTER I WITH MACRON
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\u017b'   #  0x00a3 -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\u017c'   #  0x00a4 -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u017a'   #  0x00a5 -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u201d'   #  0x00a6 -> RIGHT DOUBLE QUOTATION MARK
+    '\xa6'     #  0x00a7 -> BROKEN BAR
+    '\xa9'     #  0x00a8 -> COPYRIGHT SIGN
+    '\xae'     #  0x00a9 -> REGISTERED SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\u0141'   #  0x00ad -> LATIN CAPITAL LETTER L WITH STROKE
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u0104'   #  0x00b5 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u010c'   #  0x00b6 -> LATIN CAPITAL LETTER C WITH CARON
+    '\u0118'   #  0x00b7 -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\u0116'   #  0x00b8 -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u012e'   #  0x00bd -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u0160'   #  0x00be -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u0172'   #  0x00c6 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\u016a'   #  0x00c7 -> LATIN CAPITAL LETTER U WITH MACRON
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u017d'   #  0x00cf -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u0105'   #  0x00d0 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u010d'   #  0x00d1 -> LATIN SMALL LETTER C WITH CARON
+    '\u0119'   #  0x00d2 -> LATIN SMALL LETTER E WITH OGONEK
+    '\u0117'   #  0x00d3 -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\u012f'   #  0x00d4 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u0161'   #  0x00d5 -> LATIN SMALL LETTER S WITH CARON
+    '\u0173'   #  0x00d6 -> LATIN SMALL LETTER U WITH OGONEK
+    '\u016b'   #  0x00d7 -> LATIN SMALL LETTER U WITH MACRON
+    '\u017e'   #  0x00d8 -> LATIN SMALL LETTER Z WITH CARON
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\xd3'     #  0x00e0 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '\u014c'   #  0x00e2 -> LATIN CAPITAL LETTER O WITH MACRON
+    '\u0143'   #  0x00e3 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\xf5'     #  0x00e4 -> LATIN SMALL LETTER O WITH TILDE
+    '\xd5'     #  0x00e5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u0144'   #  0x00e7 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0136'   #  0x00e8 -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\u0137'   #  0x00e9 -> LATIN SMALL LETTER K WITH CEDILLA
+    '\u013b'   #  0x00ea -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\u013c'   #  0x00eb -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u0146'   #  0x00ec -> LATIN SMALL LETTER N WITH CEDILLA
+    '\u0112'   #  0x00ed -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u0145'   #  0x00ee -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\u2019'   #  0x00ef -> RIGHT SINGLE QUOTATION MARK
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u201c'   #  0x00f2 -> LEFT DOUBLE QUOTATION MARK
+    '\xbe'     #  0x00f3 -> VULGAR FRACTION THREE QUARTERS
+    '\xb6'     #  0x00f4 -> PILCROW SIGN
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u201e'   #  0x00f7 -> DOUBLE LOW-9 QUOTATION MARK
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\xb9'     #  0x00fb -> SUPERSCRIPT ONE
+    '\xb3'     #  0x00fc -> SUPERSCRIPT THREE
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a2: 0x0096,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x009f,     #  CURRENCY SIGN
+    0x00a6: 0x00a7,     #  BROKEN BAR
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a9: 0x00a8,     #  COPYRIGHT SIGN
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00ae: 0x00a9,     #  REGISTERED SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b3: 0x00fc,     #  SUPERSCRIPT THREE
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b6: 0x00f4,     #  PILCROW SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00b9: 0x00fb,     #  SUPERSCRIPT ONE
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00be: 0x00f3,     #  VULGAR FRACTION THREE QUARTERS
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00d3: 0x00e0,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d5: 0x00e5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d7: 0x009e,     #  MULTIPLICATION SIGN
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S (GERMAN)
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f5: 0x00e4,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0100: 0x00a0,     #  LATIN CAPITAL LETTER A WITH MACRON
+    0x0101: 0x0083,     #  LATIN SMALL LETTER A WITH MACRON
+    0x0104: 0x00b5,     #  LATIN CAPITAL LETTER A WITH OGONEK
+    0x0105: 0x00d0,     #  LATIN SMALL LETTER A WITH OGONEK
+    0x0106: 0x0080,     #  LATIN CAPITAL LETTER C WITH ACUTE
+    0x0107: 0x0087,     #  LATIN SMALL LETTER C WITH ACUTE
+    0x010c: 0x00b6,     #  LATIN CAPITAL LETTER C WITH CARON
+    0x010d: 0x00d1,     #  LATIN SMALL LETTER C WITH CARON
+    0x0112: 0x00ed,     #  LATIN CAPITAL LETTER E WITH MACRON
+    0x0113: 0x0089,     #  LATIN SMALL LETTER E WITH MACRON
+    0x0116: 0x00b8,     #  LATIN CAPITAL LETTER E WITH DOT ABOVE
+    0x0117: 0x00d3,     #  LATIN SMALL LETTER E WITH DOT ABOVE
+    0x0118: 0x00b7,     #  LATIN CAPITAL LETTER E WITH OGONEK
+    0x0119: 0x00d2,     #  LATIN SMALL LETTER E WITH OGONEK
+    0x0122: 0x0095,     #  LATIN CAPITAL LETTER G WITH CEDILLA
+    0x0123: 0x0085,     #  LATIN SMALL LETTER G WITH CEDILLA
+    0x012a: 0x00a1,     #  LATIN CAPITAL LETTER I WITH MACRON
+    0x012b: 0x008c,     #  LATIN SMALL LETTER I WITH MACRON
+    0x012e: 0x00bd,     #  LATIN CAPITAL LETTER I WITH OGONEK
+    0x012f: 0x00d4,     #  LATIN SMALL LETTER I WITH OGONEK
+    0x0136: 0x00e8,     #  LATIN CAPITAL LETTER K WITH CEDILLA
+    0x0137: 0x00e9,     #  LATIN SMALL LETTER K WITH CEDILLA
+    0x013b: 0x00ea,     #  LATIN CAPITAL LETTER L WITH CEDILLA
+    0x013c: 0x00eb,     #  LATIN SMALL LETTER L WITH CEDILLA
+    0x0141: 0x00ad,     #  LATIN CAPITAL LETTER L WITH STROKE
+    0x0142: 0x0088,     #  LATIN SMALL LETTER L WITH STROKE
+    0x0143: 0x00e3,     #  LATIN CAPITAL LETTER N WITH ACUTE
+    0x0144: 0x00e7,     #  LATIN SMALL LETTER N WITH ACUTE
+    0x0145: 0x00ee,     #  LATIN CAPITAL LETTER N WITH CEDILLA
+    0x0146: 0x00ec,     #  LATIN SMALL LETTER N WITH CEDILLA
+    0x014c: 0x00e2,     #  LATIN CAPITAL LETTER O WITH MACRON
+    0x014d: 0x0093,     #  LATIN SMALL LETTER O WITH MACRON
+    0x0156: 0x008a,     #  LATIN CAPITAL LETTER R WITH CEDILLA
+    0x0157: 0x008b,     #  LATIN SMALL LETTER R WITH CEDILLA
+    0x015a: 0x0097,     #  LATIN CAPITAL LETTER S WITH ACUTE
+    0x015b: 0x0098,     #  LATIN SMALL LETTER S WITH ACUTE
+    0x0160: 0x00be,     #  LATIN CAPITAL LETTER S WITH CARON
+    0x0161: 0x00d5,     #  LATIN SMALL LETTER S WITH CARON
+    0x016a: 0x00c7,     #  LATIN CAPITAL LETTER U WITH MACRON
+    0x016b: 0x00d7,     #  LATIN SMALL LETTER U WITH MACRON
+    0x0172: 0x00c6,     #  LATIN CAPITAL LETTER U WITH OGONEK
+    0x0173: 0x00d6,     #  LATIN SMALL LETTER U WITH OGONEK
+    0x0179: 0x008d,     #  LATIN CAPITAL LETTER Z WITH ACUTE
+    0x017a: 0x00a5,     #  LATIN SMALL LETTER Z WITH ACUTE
+    0x017b: 0x00a3,     #  LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    0x017c: 0x00a4,     #  LATIN SMALL LETTER Z WITH DOT ABOVE
+    0x017d: 0x00cf,     #  LATIN CAPITAL LETTER Z WITH CARON
+    0x017e: 0x00d8,     #  LATIN SMALL LETTER Z WITH CARON
+    0x2019: 0x00ef,     #  RIGHT SINGLE QUOTATION MARK
+    0x201c: 0x00f2,     #  LEFT DOUBLE QUOTATION MARK
+    0x201d: 0x00a6,     #  RIGHT DOUBLE QUOTATION MARK
+    0x201e: 0x00f7,     #  DOUBLE LOW-9 QUOTATION MARK
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp850.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp850.py
new file mode 100644
index 0000000000000000000000000000000000000000..f98aef99fb6a251f9712d56aa3213a622b41928f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp850.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP850.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp850',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00ff,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x00d7,     #  MULTIPLICATION SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x00ae,     #  REGISTERED SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00b6: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00b7: 0x00c0,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00b8: 0x00a9,     #  COPYRIGHT SIGN
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x00a2,     #  CENT SIGN
+    0x00be: 0x00a5,     #  YEN SIGN
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x00e3,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00c7: 0x00c3,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x00a4,     #  CURRENCY SIGN
+    0x00d0: 0x00f0,     #  LATIN SMALL LETTER ETH
+    0x00d1: 0x00d0,     #  LATIN CAPITAL LETTER ETH
+    0x00d2: 0x00ca,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00d3: 0x00cb,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00d4: 0x00c8,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00d5: 0x0131,     #  LATIN SMALL LETTER DOTLESS I
+    0x00d6: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d7: 0x00ce,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00d8: 0x00cf,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x00a6,     #  BROKEN BAR
+    0x00de: 0x00cc,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00e3: 0x00d2,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00e4: 0x00f5,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00e5: 0x00d5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x00fe,     #  LATIN SMALL LETTER THORN
+    0x00e8: 0x00de,     #  LATIN CAPITAL LETTER THORN
+    0x00e9: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00ea: 0x00db,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00eb: 0x00d9,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00ec: 0x00fd,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00ed: 0x00dd,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00ee: 0x00af,     #  MACRON
+    0x00ef: 0x00b4,     #  ACUTE ACCENT
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2017,     #  DOUBLE LOW LINE
+    0x00f3: 0x00be,     #  VULGAR FRACTION THREE QUARTERS
+    0x00f4: 0x00b6,     #  PILCROW SIGN
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x00b8,     #  CEDILLA
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x00a8,     #  DIAERESIS
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x00b9,     #  SUPERSCRIPT ONE
+    0x00fc: 0x00b3,     #  SUPERSCRIPT THREE
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xec'     #  0x008d -> LATIN SMALL LETTER I WITH GRAVE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xff'     #  0x0098 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd7'     #  0x009e -> MULTIPLICATION SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\xae'     #  0x00a9 -> REGISTERED SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\xc1'     #  0x00b5 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0x00b6 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc0'     #  0x00b7 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xa9'     #  0x00b8 -> COPYRIGHT SIGN
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\xa2'     #  0x00bd -> CENT SIGN
+    '\xa5'     #  0x00be -> YEN SIGN
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\xe3'     #  0x00c6 -> LATIN SMALL LETTER A WITH TILDE
+    '\xc3'     #  0x00c7 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0x00cf -> CURRENCY SIGN
+    '\xf0'     #  0x00d0 -> LATIN SMALL LETTER ETH
+    '\xd0'     #  0x00d1 -> LATIN CAPITAL LETTER ETH
+    '\xca'     #  0x00d2 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x00d3 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x00d4 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\u0131'   #  0x00d5 -> LATIN SMALL LETTER DOTLESS I
+    '\xcd'     #  0x00d6 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x00d7 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x00d8 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\xa6'     #  0x00dd -> BROKEN BAR
+    '\xcc'     #  0x00de -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\xd3'     #  0x00e0 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\xd4'     #  0x00e2 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd2'     #  0x00e3 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xf5'     #  0x00e4 -> LATIN SMALL LETTER O WITH TILDE
+    '\xd5'     #  0x00e5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\xfe'     #  0x00e7 -> LATIN SMALL LETTER THORN
+    '\xde'     #  0x00e8 -> LATIN CAPITAL LETTER THORN
+    '\xda'     #  0x00e9 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0x00ea -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0x00eb -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xfd'     #  0x00ec -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xdd'     #  0x00ed -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xaf'     #  0x00ee -> MACRON
+    '\xb4'     #  0x00ef -> ACUTE ACCENT
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2017'   #  0x00f2 -> DOUBLE LOW LINE
+    '\xbe'     #  0x00f3 -> VULGAR FRACTION THREE QUARTERS
+    '\xb6'     #  0x00f4 -> PILCROW SIGN
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\xb8'     #  0x00f7 -> CEDILLA
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\xa8'     #  0x00f9 -> DIAERESIS
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\xb9'     #  0x00fb -> SUPERSCRIPT ONE
+    '\xb3'     #  0x00fc -> SUPERSCRIPT THREE
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x00bd,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x00cf,     #  CURRENCY SIGN
+    0x00a5: 0x00be,     #  YEN SIGN
+    0x00a6: 0x00dd,     #  BROKEN BAR
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a8: 0x00f9,     #  DIAERESIS
+    0x00a9: 0x00b8,     #  COPYRIGHT SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00ae: 0x00a9,     #  REGISTERED SIGN
+    0x00af: 0x00ee,     #  MACRON
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b3: 0x00fc,     #  SUPERSCRIPT THREE
+    0x00b4: 0x00ef,     #  ACUTE ACCENT
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b6: 0x00f4,     #  PILCROW SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00b8: 0x00f7,     #  CEDILLA
+    0x00b9: 0x00fb,     #  SUPERSCRIPT ONE
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00be: 0x00f3,     #  VULGAR FRACTION THREE QUARTERS
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c0: 0x00b7,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00c1: 0x00b5,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c2: 0x00b6,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c3: 0x00c7,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c8: 0x00d4,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00ca: 0x00d2,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00cb: 0x00d3,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00cc: 0x00de,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00cd: 0x00d6,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00ce: 0x00d7,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00cf: 0x00d8,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d0: 0x00d1,     #  LATIN CAPITAL LETTER ETH
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d2: 0x00e3,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00d3: 0x00e0,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d4: 0x00e2,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d5: 0x00e5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d7: 0x009e,     #  MULTIPLICATION SIGN
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00d9: 0x00eb,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00da: 0x00e9,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00db: 0x00ea,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00dd: 0x00ed,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00de: 0x00e8,     #  LATIN CAPITAL LETTER THORN
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e3: 0x00c6,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ec: 0x008d,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f0: 0x00d0,     #  LATIN SMALL LETTER ETH
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f5: 0x00e4,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00fd: 0x00ec,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00fe: 0x00e7,     #  LATIN SMALL LETTER THORN
+    0x00ff: 0x0098,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0131: 0x00d5,     #  LATIN SMALL LETTER DOTLESS I
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x2017: 0x00f2,     #  DOUBLE LOW LINE
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp852.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp852.py
new file mode 100644
index 0000000000000000000000000000000000000000..34d8a0ea5acc4b7f97cf4f943cfc4a78bb3d4247
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp852.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP852.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp852',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x016f,     #  LATIN SMALL LETTER U WITH RING ABOVE
+    0x0086: 0x0107,     #  LATIN SMALL LETTER C WITH ACUTE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x0142,     #  LATIN SMALL LETTER L WITH STROKE
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x0150,     #  LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    0x008b: 0x0151,     #  LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x0179,     #  LATIN CAPITAL LETTER Z WITH ACUTE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x0106,     #  LATIN CAPITAL LETTER C WITH ACUTE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x0139,     #  LATIN CAPITAL LETTER L WITH ACUTE
+    0x0092: 0x013a,     #  LATIN SMALL LETTER L WITH ACUTE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x013d,     #  LATIN CAPITAL LETTER L WITH CARON
+    0x0096: 0x013e,     #  LATIN SMALL LETTER L WITH CARON
+    0x0097: 0x015a,     #  LATIN CAPITAL LETTER S WITH ACUTE
+    0x0098: 0x015b,     #  LATIN SMALL LETTER S WITH ACUTE
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x0164,     #  LATIN CAPITAL LETTER T WITH CARON
+    0x009c: 0x0165,     #  LATIN SMALL LETTER T WITH CARON
+    0x009d: 0x0141,     #  LATIN CAPITAL LETTER L WITH STROKE
+    0x009e: 0x00d7,     #  MULTIPLICATION SIGN
+    0x009f: 0x010d,     #  LATIN SMALL LETTER C WITH CARON
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x0104,     #  LATIN CAPITAL LETTER A WITH OGONEK
+    0x00a5: 0x0105,     #  LATIN SMALL LETTER A WITH OGONEK
+    0x00a6: 0x017d,     #  LATIN CAPITAL LETTER Z WITH CARON
+    0x00a7: 0x017e,     #  LATIN SMALL LETTER Z WITH CARON
+    0x00a8: 0x0118,     #  LATIN CAPITAL LETTER E WITH OGONEK
+    0x00a9: 0x0119,     #  LATIN SMALL LETTER E WITH OGONEK
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x017a,     #  LATIN SMALL LETTER Z WITH ACUTE
+    0x00ac: 0x010c,     #  LATIN CAPITAL LETTER C WITH CARON
+    0x00ad: 0x015f,     #  LATIN SMALL LETTER S WITH CEDILLA
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00b6: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00b7: 0x011a,     #  LATIN CAPITAL LETTER E WITH CARON
+    0x00b8: 0x015e,     #  LATIN CAPITAL LETTER S WITH CEDILLA
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x017b,     #  LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    0x00be: 0x017c,     #  LATIN SMALL LETTER Z WITH DOT ABOVE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x0102,     #  LATIN CAPITAL LETTER A WITH BREVE
+    0x00c7: 0x0103,     #  LATIN SMALL LETTER A WITH BREVE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x00a4,     #  CURRENCY SIGN
+    0x00d0: 0x0111,     #  LATIN SMALL LETTER D WITH STROKE
+    0x00d1: 0x0110,     #  LATIN CAPITAL LETTER D WITH STROKE
+    0x00d2: 0x010e,     #  LATIN CAPITAL LETTER D WITH CARON
+    0x00d3: 0x00cb,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00d4: 0x010f,     #  LATIN SMALL LETTER D WITH CARON
+    0x00d5: 0x0147,     #  LATIN CAPITAL LETTER N WITH CARON
+    0x00d6: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d7: 0x00ce,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00d8: 0x011b,     #  LATIN SMALL LETTER E WITH CARON
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x0162,     #  LATIN CAPITAL LETTER T WITH CEDILLA
+    0x00de: 0x016e,     #  LATIN CAPITAL LETTER U WITH RING ABOVE
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00e3: 0x0143,     #  LATIN CAPITAL LETTER N WITH ACUTE
+    0x00e4: 0x0144,     #  LATIN SMALL LETTER N WITH ACUTE
+    0x00e5: 0x0148,     #  LATIN SMALL LETTER N WITH CARON
+    0x00e6: 0x0160,     #  LATIN CAPITAL LETTER S WITH CARON
+    0x00e7: 0x0161,     #  LATIN SMALL LETTER S WITH CARON
+    0x00e8: 0x0154,     #  LATIN CAPITAL LETTER R WITH ACUTE
+    0x00e9: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00ea: 0x0155,     #  LATIN SMALL LETTER R WITH ACUTE
+    0x00eb: 0x0170,     #  LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    0x00ec: 0x00fd,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00ed: 0x00dd,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00ee: 0x0163,     #  LATIN SMALL LETTER T WITH CEDILLA
+    0x00ef: 0x00b4,     #  ACUTE ACCENT
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x02dd,     #  DOUBLE ACUTE ACCENT
+    0x00f2: 0x02db,     #  OGONEK
+    0x00f3: 0x02c7,     #  CARON
+    0x00f4: 0x02d8,     #  BREVE
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x00b8,     #  CEDILLA
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x00a8,     #  DIAERESIS
+    0x00fa: 0x02d9,     #  DOT ABOVE
+    0x00fb: 0x0171,     #  LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    0x00fc: 0x0158,     #  LATIN CAPITAL LETTER R WITH CARON
+    0x00fd: 0x0159,     #  LATIN SMALL LETTER R WITH CARON
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u016f'   #  0x0085 -> LATIN SMALL LETTER U WITH RING ABOVE
+    '\u0107'   #  0x0086 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\u0142'   #  0x0088 -> LATIN SMALL LETTER L WITH STROKE
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u0150'   #  0x008a -> LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    '\u0151'   #  0x008b -> LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u0179'   #  0x008d -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u0106'   #  0x008f -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0139'   #  0x0091 -> LATIN CAPITAL LETTER L WITH ACUTE
+    '\u013a'   #  0x0092 -> LATIN SMALL LETTER L WITH ACUTE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\u013d'   #  0x0095 -> LATIN CAPITAL LETTER L WITH CARON
+    '\u013e'   #  0x0096 -> LATIN SMALL LETTER L WITH CARON
+    '\u015a'   #  0x0097 -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u015b'   #  0x0098 -> LATIN SMALL LETTER S WITH ACUTE
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0164'   #  0x009b -> LATIN CAPITAL LETTER T WITH CARON
+    '\u0165'   #  0x009c -> LATIN SMALL LETTER T WITH CARON
+    '\u0141'   #  0x009d -> LATIN CAPITAL LETTER L WITH STROKE
+    '\xd7'     #  0x009e -> MULTIPLICATION SIGN
+    '\u010d'   #  0x009f -> LATIN SMALL LETTER C WITH CARON
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\u0104'   #  0x00a4 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u0105'   #  0x00a5 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u017d'   #  0x00a6 -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u017e'   #  0x00a7 -> LATIN SMALL LETTER Z WITH CARON
+    '\u0118'   #  0x00a8 -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\u0119'   #  0x00a9 -> LATIN SMALL LETTER E WITH OGONEK
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\u017a'   #  0x00ab -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u010c'   #  0x00ac -> LATIN CAPITAL LETTER C WITH CARON
+    '\u015f'   #  0x00ad -> LATIN SMALL LETTER S WITH CEDILLA
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\xc1'     #  0x00b5 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0x00b6 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u011a'   #  0x00b7 -> LATIN CAPITAL LETTER E WITH CARON
+    '\u015e'   #  0x00b8 -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u017b'   #  0x00bd -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\u017c'   #  0x00be -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u0102'   #  0x00c6 -> LATIN CAPITAL LETTER A WITH BREVE
+    '\u0103'   #  0x00c7 -> LATIN SMALL LETTER A WITH BREVE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0x00cf -> CURRENCY SIGN
+    '\u0111'   #  0x00d0 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0110'   #  0x00d1 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u010e'   #  0x00d2 -> LATIN CAPITAL LETTER D WITH CARON
+    '\xcb'     #  0x00d3 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u010f'   #  0x00d4 -> LATIN SMALL LETTER D WITH CARON
+    '\u0147'   #  0x00d5 -> LATIN CAPITAL LETTER N WITH CARON
+    '\xcd'     #  0x00d6 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x00d7 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\u011b'   #  0x00d8 -> LATIN SMALL LETTER E WITH CARON
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u0162'   #  0x00dd -> LATIN CAPITAL LETTER T WITH CEDILLA
+    '\u016e'   #  0x00de -> LATIN CAPITAL LETTER U WITH RING ABOVE
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\xd3'     #  0x00e0 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\xd4'     #  0x00e2 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0143'   #  0x00e3 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\u0144'   #  0x00e4 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0148'   #  0x00e5 -> LATIN SMALL LETTER N WITH CARON
+    '\u0160'   #  0x00e6 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0161'   #  0x00e7 -> LATIN SMALL LETTER S WITH CARON
+    '\u0154'   #  0x00e8 -> LATIN CAPITAL LETTER R WITH ACUTE
+    '\xda'     #  0x00e9 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\u0155'   #  0x00ea -> LATIN SMALL LETTER R WITH ACUTE
+    '\u0170'   #  0x00eb -> LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    '\xfd'     #  0x00ec -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xdd'     #  0x00ed -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\u0163'   #  0x00ee -> LATIN SMALL LETTER T WITH CEDILLA
+    '\xb4'     #  0x00ef -> ACUTE ACCENT
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\u02dd'   #  0x00f1 -> DOUBLE ACUTE ACCENT
+    '\u02db'   #  0x00f2 -> OGONEK
+    '\u02c7'   #  0x00f3 -> CARON
+    '\u02d8'   #  0x00f4 -> BREVE
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\xb8'     #  0x00f7 -> CEDILLA
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\xa8'     #  0x00f9 -> DIAERESIS
+    '\u02d9'   #  0x00fa -> DOT ABOVE
+    '\u0171'   #  0x00fb -> LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    '\u0158'   #  0x00fc -> LATIN CAPITAL LETTER R WITH CARON
+    '\u0159'   #  0x00fd -> LATIN SMALL LETTER R WITH CARON
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a4: 0x00cf,     #  CURRENCY SIGN
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a8: 0x00f9,     #  DIAERESIS
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b4: 0x00ef,     #  ACUTE ACCENT
+    0x00b8: 0x00f7,     #  CEDILLA
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00c1: 0x00b5,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c2: 0x00b6,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00cb: 0x00d3,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00cd: 0x00d6,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00ce: 0x00d7,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00d3: 0x00e0,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d4: 0x00e2,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d7: 0x009e,     #  MULTIPLICATION SIGN
+    0x00da: 0x00e9,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00dd: 0x00ed,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00fd: 0x00ec,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x0102: 0x00c6,     #  LATIN CAPITAL LETTER A WITH BREVE
+    0x0103: 0x00c7,     #  LATIN SMALL LETTER A WITH BREVE
+    0x0104: 0x00a4,     #  LATIN CAPITAL LETTER A WITH OGONEK
+    0x0105: 0x00a5,     #  LATIN SMALL LETTER A WITH OGONEK
+    0x0106: 0x008f,     #  LATIN CAPITAL LETTER C WITH ACUTE
+    0x0107: 0x0086,     #  LATIN SMALL LETTER C WITH ACUTE
+    0x010c: 0x00ac,     #  LATIN CAPITAL LETTER C WITH CARON
+    0x010d: 0x009f,     #  LATIN SMALL LETTER C WITH CARON
+    0x010e: 0x00d2,     #  LATIN CAPITAL LETTER D WITH CARON
+    0x010f: 0x00d4,     #  LATIN SMALL LETTER D WITH CARON
+    0x0110: 0x00d1,     #  LATIN CAPITAL LETTER D WITH STROKE
+    0x0111: 0x00d0,     #  LATIN SMALL LETTER D WITH STROKE
+    0x0118: 0x00a8,     #  LATIN CAPITAL LETTER E WITH OGONEK
+    0x0119: 0x00a9,     #  LATIN SMALL LETTER E WITH OGONEK
+    0x011a: 0x00b7,     #  LATIN CAPITAL LETTER E WITH CARON
+    0x011b: 0x00d8,     #  LATIN SMALL LETTER E WITH CARON
+    0x0139: 0x0091,     #  LATIN CAPITAL LETTER L WITH ACUTE
+    0x013a: 0x0092,     #  LATIN SMALL LETTER L WITH ACUTE
+    0x013d: 0x0095,     #  LATIN CAPITAL LETTER L WITH CARON
+    0x013e: 0x0096,     #  LATIN SMALL LETTER L WITH CARON
+    0x0141: 0x009d,     #  LATIN CAPITAL LETTER L WITH STROKE
+    0x0142: 0x0088,     #  LATIN SMALL LETTER L WITH STROKE
+    0x0143: 0x00e3,     #  LATIN CAPITAL LETTER N WITH ACUTE
+    0x0144: 0x00e4,     #  LATIN SMALL LETTER N WITH ACUTE
+    0x0147: 0x00d5,     #  LATIN CAPITAL LETTER N WITH CARON
+    0x0148: 0x00e5,     #  LATIN SMALL LETTER N WITH CARON
+    0x0150: 0x008a,     #  LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    0x0151: 0x008b,     #  LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    0x0154: 0x00e8,     #  LATIN CAPITAL LETTER R WITH ACUTE
+    0x0155: 0x00ea,     #  LATIN SMALL LETTER R WITH ACUTE
+    0x0158: 0x00fc,     #  LATIN CAPITAL LETTER R WITH CARON
+    0x0159: 0x00fd,     #  LATIN SMALL LETTER R WITH CARON
+    0x015a: 0x0097,     #  LATIN CAPITAL LETTER S WITH ACUTE
+    0x015b: 0x0098,     #  LATIN SMALL LETTER S WITH ACUTE
+    0x015e: 0x00b8,     #  LATIN CAPITAL LETTER S WITH CEDILLA
+    0x015f: 0x00ad,     #  LATIN SMALL LETTER S WITH CEDILLA
+    0x0160: 0x00e6,     #  LATIN CAPITAL LETTER S WITH CARON
+    0x0161: 0x00e7,     #  LATIN SMALL LETTER S WITH CARON
+    0x0162: 0x00dd,     #  LATIN CAPITAL LETTER T WITH CEDILLA
+    0x0163: 0x00ee,     #  LATIN SMALL LETTER T WITH CEDILLA
+    0x0164: 0x009b,     #  LATIN CAPITAL LETTER T WITH CARON
+    0x0165: 0x009c,     #  LATIN SMALL LETTER T WITH CARON
+    0x016e: 0x00de,     #  LATIN CAPITAL LETTER U WITH RING ABOVE
+    0x016f: 0x0085,     #  LATIN SMALL LETTER U WITH RING ABOVE
+    0x0170: 0x00eb,     #  LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    0x0171: 0x00fb,     #  LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    0x0179: 0x008d,     #  LATIN CAPITAL LETTER Z WITH ACUTE
+    0x017a: 0x00ab,     #  LATIN SMALL LETTER Z WITH ACUTE
+    0x017b: 0x00bd,     #  LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    0x017c: 0x00be,     #  LATIN SMALL LETTER Z WITH DOT ABOVE
+    0x017d: 0x00a6,     #  LATIN CAPITAL LETTER Z WITH CARON
+    0x017e: 0x00a7,     #  LATIN SMALL LETTER Z WITH CARON
+    0x02c7: 0x00f3,     #  CARON
+    0x02d8: 0x00f4,     #  BREVE
+    0x02d9: 0x00fa,     #  DOT ABOVE
+    0x02db: 0x00f2,     #  OGONEK
+    0x02dd: 0x00f1,     #  DOUBLE ACUTE ACCENT
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp855.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp855.py
new file mode 100644
index 0000000000000000000000000000000000000000..4fe9210697ce29487035e8691a5502c82c0b1eb5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp855.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP855.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp855',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x0452,     #  CYRILLIC SMALL LETTER DJE
+    0x0081: 0x0402,     #  CYRILLIC CAPITAL LETTER DJE
+    0x0082: 0x0453,     #  CYRILLIC SMALL LETTER GJE
+    0x0083: 0x0403,     #  CYRILLIC CAPITAL LETTER GJE
+    0x0084: 0x0451,     #  CYRILLIC SMALL LETTER IO
+    0x0085: 0x0401,     #  CYRILLIC CAPITAL LETTER IO
+    0x0086: 0x0454,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x0087: 0x0404,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x0088: 0x0455,     #  CYRILLIC SMALL LETTER DZE
+    0x0089: 0x0405,     #  CYRILLIC CAPITAL LETTER DZE
+    0x008a: 0x0456,     #  CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x008b: 0x0406,     #  CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x008c: 0x0457,     #  CYRILLIC SMALL LETTER YI
+    0x008d: 0x0407,     #  CYRILLIC CAPITAL LETTER YI
+    0x008e: 0x0458,     #  CYRILLIC SMALL LETTER JE
+    0x008f: 0x0408,     #  CYRILLIC CAPITAL LETTER JE
+    0x0090: 0x0459,     #  CYRILLIC SMALL LETTER LJE
+    0x0091: 0x0409,     #  CYRILLIC CAPITAL LETTER LJE
+    0x0092: 0x045a,     #  CYRILLIC SMALL LETTER NJE
+    0x0093: 0x040a,     #  CYRILLIC CAPITAL LETTER NJE
+    0x0094: 0x045b,     #  CYRILLIC SMALL LETTER TSHE
+    0x0095: 0x040b,     #  CYRILLIC CAPITAL LETTER TSHE
+    0x0096: 0x045c,     #  CYRILLIC SMALL LETTER KJE
+    0x0097: 0x040c,     #  CYRILLIC CAPITAL LETTER KJE
+    0x0098: 0x045e,     #  CYRILLIC SMALL LETTER SHORT U
+    0x0099: 0x040e,     #  CYRILLIC CAPITAL LETTER SHORT U
+    0x009a: 0x045f,     #  CYRILLIC SMALL LETTER DZHE
+    0x009b: 0x040f,     #  CYRILLIC CAPITAL LETTER DZHE
+    0x009c: 0x044e,     #  CYRILLIC SMALL LETTER YU
+    0x009d: 0x042e,     #  CYRILLIC CAPITAL LETTER YU
+    0x009e: 0x044a,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x009f: 0x042a,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x00a0: 0x0430,     #  CYRILLIC SMALL LETTER A
+    0x00a1: 0x0410,     #  CYRILLIC CAPITAL LETTER A
+    0x00a2: 0x0431,     #  CYRILLIC SMALL LETTER BE
+    0x00a3: 0x0411,     #  CYRILLIC CAPITAL LETTER BE
+    0x00a4: 0x0446,     #  CYRILLIC SMALL LETTER TSE
+    0x00a5: 0x0426,     #  CYRILLIC CAPITAL LETTER TSE
+    0x00a6: 0x0434,     #  CYRILLIC SMALL LETTER DE
+    0x00a7: 0x0414,     #  CYRILLIC CAPITAL LETTER DE
+    0x00a8: 0x0435,     #  CYRILLIC SMALL LETTER IE
+    0x00a9: 0x0415,     #  CYRILLIC CAPITAL LETTER IE
+    0x00aa: 0x0444,     #  CYRILLIC SMALL LETTER EF
+    0x00ab: 0x0424,     #  CYRILLIC CAPITAL LETTER EF
+    0x00ac: 0x0433,     #  CYRILLIC SMALL LETTER GHE
+    0x00ad: 0x0413,     #  CYRILLIC CAPITAL LETTER GHE
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x0445,     #  CYRILLIC SMALL LETTER HA
+    0x00b6: 0x0425,     #  CYRILLIC CAPITAL LETTER HA
+    0x00b7: 0x0438,     #  CYRILLIC SMALL LETTER I
+    0x00b8: 0x0418,     #  CYRILLIC CAPITAL LETTER I
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x0439,     #  CYRILLIC SMALL LETTER SHORT I
+    0x00be: 0x0419,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x043a,     #  CYRILLIC SMALL LETTER KA
+    0x00c7: 0x041a,     #  CYRILLIC CAPITAL LETTER KA
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x00a4,     #  CURRENCY SIGN
+    0x00d0: 0x043b,     #  CYRILLIC SMALL LETTER EL
+    0x00d1: 0x041b,     #  CYRILLIC CAPITAL LETTER EL
+    0x00d2: 0x043c,     #  CYRILLIC SMALL LETTER EM
+    0x00d3: 0x041c,     #  CYRILLIC CAPITAL LETTER EM
+    0x00d4: 0x043d,     #  CYRILLIC SMALL LETTER EN
+    0x00d5: 0x041d,     #  CYRILLIC CAPITAL LETTER EN
+    0x00d6: 0x043e,     #  CYRILLIC SMALL LETTER O
+    0x00d7: 0x041e,     #  CYRILLIC CAPITAL LETTER O
+    0x00d8: 0x043f,     #  CYRILLIC SMALL LETTER PE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x041f,     #  CYRILLIC CAPITAL LETTER PE
+    0x00de: 0x044f,     #  CYRILLIC SMALL LETTER YA
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x042f,     #  CYRILLIC CAPITAL LETTER YA
+    0x00e1: 0x0440,     #  CYRILLIC SMALL LETTER ER
+    0x00e2: 0x0420,     #  CYRILLIC CAPITAL LETTER ER
+    0x00e3: 0x0441,     #  CYRILLIC SMALL LETTER ES
+    0x00e4: 0x0421,     #  CYRILLIC CAPITAL LETTER ES
+    0x00e5: 0x0442,     #  CYRILLIC SMALL LETTER TE
+    0x00e6: 0x0422,     #  CYRILLIC CAPITAL LETTER TE
+    0x00e7: 0x0443,     #  CYRILLIC SMALL LETTER U
+    0x00e8: 0x0423,     #  CYRILLIC CAPITAL LETTER U
+    0x00e9: 0x0436,     #  CYRILLIC SMALL LETTER ZHE
+    0x00ea: 0x0416,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x00eb: 0x0432,     #  CYRILLIC SMALL LETTER VE
+    0x00ec: 0x0412,     #  CYRILLIC CAPITAL LETTER VE
+    0x00ed: 0x044c,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x00ee: 0x042c,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x00ef: 0x2116,     #  NUMERO SIGN
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x044b,     #  CYRILLIC SMALL LETTER YERU
+    0x00f2: 0x042b,     #  CYRILLIC CAPITAL LETTER YERU
+    0x00f3: 0x0437,     #  CYRILLIC SMALL LETTER ZE
+    0x00f4: 0x0417,     #  CYRILLIC CAPITAL LETTER ZE
+    0x00f5: 0x0448,     #  CYRILLIC SMALL LETTER SHA
+    0x00f6: 0x0428,     #  CYRILLIC CAPITAL LETTER SHA
+    0x00f7: 0x044d,     #  CYRILLIC SMALL LETTER E
+    0x00f8: 0x042d,     #  CYRILLIC CAPITAL LETTER E
+    0x00f9: 0x0449,     #  CYRILLIC SMALL LETTER SHCHA
+    0x00fa: 0x0429,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x00fb: 0x0447,     #  CYRILLIC SMALL LETTER CHE
+    0x00fc: 0x0427,     #  CYRILLIC CAPITAL LETTER CHE
+    0x00fd: 0x00a7,     #  SECTION SIGN
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u0452'   #  0x0080 -> CYRILLIC SMALL LETTER DJE
+    '\u0402'   #  0x0081 -> CYRILLIC CAPITAL LETTER DJE
+    '\u0453'   #  0x0082 -> CYRILLIC SMALL LETTER GJE
+    '\u0403'   #  0x0083 -> CYRILLIC CAPITAL LETTER GJE
+    '\u0451'   #  0x0084 -> CYRILLIC SMALL LETTER IO
+    '\u0401'   #  0x0085 -> CYRILLIC CAPITAL LETTER IO
+    '\u0454'   #  0x0086 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u0404'   #  0x0087 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u0455'   #  0x0088 -> CYRILLIC SMALL LETTER DZE
+    '\u0405'   #  0x0089 -> CYRILLIC CAPITAL LETTER DZE
+    '\u0456'   #  0x008a -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0406'   #  0x008b -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0457'   #  0x008c -> CYRILLIC SMALL LETTER YI
+    '\u0407'   #  0x008d -> CYRILLIC CAPITAL LETTER YI
+    '\u0458'   #  0x008e -> CYRILLIC SMALL LETTER JE
+    '\u0408'   #  0x008f -> CYRILLIC CAPITAL LETTER JE
+    '\u0459'   #  0x0090 -> CYRILLIC SMALL LETTER LJE
+    '\u0409'   #  0x0091 -> CYRILLIC CAPITAL LETTER LJE
+    '\u045a'   #  0x0092 -> CYRILLIC SMALL LETTER NJE
+    '\u040a'   #  0x0093 -> CYRILLIC CAPITAL LETTER NJE
+    '\u045b'   #  0x0094 -> CYRILLIC SMALL LETTER TSHE
+    '\u040b'   #  0x0095 -> CYRILLIC CAPITAL LETTER TSHE
+    '\u045c'   #  0x0096 -> CYRILLIC SMALL LETTER KJE
+    '\u040c'   #  0x0097 -> CYRILLIC CAPITAL LETTER KJE
+    '\u045e'   #  0x0098 -> CYRILLIC SMALL LETTER SHORT U
+    '\u040e'   #  0x0099 -> CYRILLIC CAPITAL LETTER SHORT U
+    '\u045f'   #  0x009a -> CYRILLIC SMALL LETTER DZHE
+    '\u040f'   #  0x009b -> CYRILLIC CAPITAL LETTER DZHE
+    '\u044e'   #  0x009c -> CYRILLIC SMALL LETTER YU
+    '\u042e'   #  0x009d -> CYRILLIC CAPITAL LETTER YU
+    '\u044a'   #  0x009e -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u042a'   #  0x009f -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u0430'   #  0x00a0 -> CYRILLIC SMALL LETTER A
+    '\u0410'   #  0x00a1 -> CYRILLIC CAPITAL LETTER A
+    '\u0431'   #  0x00a2 -> CYRILLIC SMALL LETTER BE
+    '\u0411'   #  0x00a3 -> CYRILLIC CAPITAL LETTER BE
+    '\u0446'   #  0x00a4 -> CYRILLIC SMALL LETTER TSE
+    '\u0426'   #  0x00a5 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0434'   #  0x00a6 -> CYRILLIC SMALL LETTER DE
+    '\u0414'   #  0x00a7 -> CYRILLIC CAPITAL LETTER DE
+    '\u0435'   #  0x00a8 -> CYRILLIC SMALL LETTER IE
+    '\u0415'   #  0x00a9 -> CYRILLIC CAPITAL LETTER IE
+    '\u0444'   #  0x00aa -> CYRILLIC SMALL LETTER EF
+    '\u0424'   #  0x00ab -> CYRILLIC CAPITAL LETTER EF
+    '\u0433'   #  0x00ac -> CYRILLIC SMALL LETTER GHE
+    '\u0413'   #  0x00ad -> CYRILLIC CAPITAL LETTER GHE
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u0445'   #  0x00b5 -> CYRILLIC SMALL LETTER HA
+    '\u0425'   #  0x00b6 -> CYRILLIC CAPITAL LETTER HA
+    '\u0438'   #  0x00b7 -> CYRILLIC SMALL LETTER I
+    '\u0418'   #  0x00b8 -> CYRILLIC CAPITAL LETTER I
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u0439'   #  0x00bd -> CYRILLIC SMALL LETTER SHORT I
+    '\u0419'   #  0x00be -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u043a'   #  0x00c6 -> CYRILLIC SMALL LETTER KA
+    '\u041a'   #  0x00c7 -> CYRILLIC CAPITAL LETTER KA
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0x00cf -> CURRENCY SIGN
+    '\u043b'   #  0x00d0 -> CYRILLIC SMALL LETTER EL
+    '\u041b'   #  0x00d1 -> CYRILLIC CAPITAL LETTER EL
+    '\u043c'   #  0x00d2 -> CYRILLIC SMALL LETTER EM
+    '\u041c'   #  0x00d3 -> CYRILLIC CAPITAL LETTER EM
+    '\u043d'   #  0x00d4 -> CYRILLIC SMALL LETTER EN
+    '\u041d'   #  0x00d5 -> CYRILLIC CAPITAL LETTER EN
+    '\u043e'   #  0x00d6 -> CYRILLIC SMALL LETTER O
+    '\u041e'   #  0x00d7 -> CYRILLIC CAPITAL LETTER O
+    '\u043f'   #  0x00d8 -> CYRILLIC SMALL LETTER PE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u041f'   #  0x00dd -> CYRILLIC CAPITAL LETTER PE
+    '\u044f'   #  0x00de -> CYRILLIC SMALL LETTER YA
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u042f'   #  0x00e0 -> CYRILLIC CAPITAL LETTER YA
+    '\u0440'   #  0x00e1 -> CYRILLIC SMALL LETTER ER
+    '\u0420'   #  0x00e2 -> CYRILLIC CAPITAL LETTER ER
+    '\u0441'   #  0x00e3 -> CYRILLIC SMALL LETTER ES
+    '\u0421'   #  0x00e4 -> CYRILLIC CAPITAL LETTER ES
+    '\u0442'   #  0x00e5 -> CYRILLIC SMALL LETTER TE
+    '\u0422'   #  0x00e6 -> CYRILLIC CAPITAL LETTER TE
+    '\u0443'   #  0x00e7 -> CYRILLIC SMALL LETTER U
+    '\u0423'   #  0x00e8 -> CYRILLIC CAPITAL LETTER U
+    '\u0436'   #  0x00e9 -> CYRILLIC SMALL LETTER ZHE
+    '\u0416'   #  0x00ea -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0432'   #  0x00eb -> CYRILLIC SMALL LETTER VE
+    '\u0412'   #  0x00ec -> CYRILLIC CAPITAL LETTER VE
+    '\u044c'   #  0x00ed -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u042c'   #  0x00ee -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u2116'   #  0x00ef -> NUMERO SIGN
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\u044b'   #  0x00f1 -> CYRILLIC SMALL LETTER YERU
+    '\u042b'   #  0x00f2 -> CYRILLIC CAPITAL LETTER YERU
+    '\u0437'   #  0x00f3 -> CYRILLIC SMALL LETTER ZE
+    '\u0417'   #  0x00f4 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0448'   #  0x00f5 -> CYRILLIC SMALL LETTER SHA
+    '\u0428'   #  0x00f6 -> CYRILLIC CAPITAL LETTER SHA
+    '\u044d'   #  0x00f7 -> CYRILLIC SMALL LETTER E
+    '\u042d'   #  0x00f8 -> CYRILLIC CAPITAL LETTER E
+    '\u0449'   #  0x00f9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u0429'   #  0x00fa -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u0447'   #  0x00fb -> CYRILLIC SMALL LETTER CHE
+    '\u0427'   #  0x00fc -> CYRILLIC CAPITAL LETTER CHE
+    '\xa7'     #  0x00fd -> SECTION SIGN
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a4: 0x00cf,     #  CURRENCY SIGN
+    0x00a7: 0x00fd,     #  SECTION SIGN
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x0401: 0x0085,     #  CYRILLIC CAPITAL LETTER IO
+    0x0402: 0x0081,     #  CYRILLIC CAPITAL LETTER DJE
+    0x0403: 0x0083,     #  CYRILLIC CAPITAL LETTER GJE
+    0x0404: 0x0087,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x0405: 0x0089,     #  CYRILLIC CAPITAL LETTER DZE
+    0x0406: 0x008b,     #  CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x0407: 0x008d,     #  CYRILLIC CAPITAL LETTER YI
+    0x0408: 0x008f,     #  CYRILLIC CAPITAL LETTER JE
+    0x0409: 0x0091,     #  CYRILLIC CAPITAL LETTER LJE
+    0x040a: 0x0093,     #  CYRILLIC CAPITAL LETTER NJE
+    0x040b: 0x0095,     #  CYRILLIC CAPITAL LETTER TSHE
+    0x040c: 0x0097,     #  CYRILLIC CAPITAL LETTER KJE
+    0x040e: 0x0099,     #  CYRILLIC CAPITAL LETTER SHORT U
+    0x040f: 0x009b,     #  CYRILLIC CAPITAL LETTER DZHE
+    0x0410: 0x00a1,     #  CYRILLIC CAPITAL LETTER A
+    0x0411: 0x00a3,     #  CYRILLIC CAPITAL LETTER BE
+    0x0412: 0x00ec,     #  CYRILLIC CAPITAL LETTER VE
+    0x0413: 0x00ad,     #  CYRILLIC CAPITAL LETTER GHE
+    0x0414: 0x00a7,     #  CYRILLIC CAPITAL LETTER DE
+    0x0415: 0x00a9,     #  CYRILLIC CAPITAL LETTER IE
+    0x0416: 0x00ea,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x0417: 0x00f4,     #  CYRILLIC CAPITAL LETTER ZE
+    0x0418: 0x00b8,     #  CYRILLIC CAPITAL LETTER I
+    0x0419: 0x00be,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x041a: 0x00c7,     #  CYRILLIC CAPITAL LETTER KA
+    0x041b: 0x00d1,     #  CYRILLIC CAPITAL LETTER EL
+    0x041c: 0x00d3,     #  CYRILLIC CAPITAL LETTER EM
+    0x041d: 0x00d5,     #  CYRILLIC CAPITAL LETTER EN
+    0x041e: 0x00d7,     #  CYRILLIC CAPITAL LETTER O
+    0x041f: 0x00dd,     #  CYRILLIC CAPITAL LETTER PE
+    0x0420: 0x00e2,     #  CYRILLIC CAPITAL LETTER ER
+    0x0421: 0x00e4,     #  CYRILLIC CAPITAL LETTER ES
+    0x0422: 0x00e6,     #  CYRILLIC CAPITAL LETTER TE
+    0x0423: 0x00e8,     #  CYRILLIC CAPITAL LETTER U
+    0x0424: 0x00ab,     #  CYRILLIC CAPITAL LETTER EF
+    0x0425: 0x00b6,     #  CYRILLIC CAPITAL LETTER HA
+    0x0426: 0x00a5,     #  CYRILLIC CAPITAL LETTER TSE
+    0x0427: 0x00fc,     #  CYRILLIC CAPITAL LETTER CHE
+    0x0428: 0x00f6,     #  CYRILLIC CAPITAL LETTER SHA
+    0x0429: 0x00fa,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x042a: 0x009f,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x042b: 0x00f2,     #  CYRILLIC CAPITAL LETTER YERU
+    0x042c: 0x00ee,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x042d: 0x00f8,     #  CYRILLIC CAPITAL LETTER E
+    0x042e: 0x009d,     #  CYRILLIC CAPITAL LETTER YU
+    0x042f: 0x00e0,     #  CYRILLIC CAPITAL LETTER YA
+    0x0430: 0x00a0,     #  CYRILLIC SMALL LETTER A
+    0x0431: 0x00a2,     #  CYRILLIC SMALL LETTER BE
+    0x0432: 0x00eb,     #  CYRILLIC SMALL LETTER VE
+    0x0433: 0x00ac,     #  CYRILLIC SMALL LETTER GHE
+    0x0434: 0x00a6,     #  CYRILLIC SMALL LETTER DE
+    0x0435: 0x00a8,     #  CYRILLIC SMALL LETTER IE
+    0x0436: 0x00e9,     #  CYRILLIC SMALL LETTER ZHE
+    0x0437: 0x00f3,     #  CYRILLIC SMALL LETTER ZE
+    0x0438: 0x00b7,     #  CYRILLIC SMALL LETTER I
+    0x0439: 0x00bd,     #  CYRILLIC SMALL LETTER SHORT I
+    0x043a: 0x00c6,     #  CYRILLIC SMALL LETTER KA
+    0x043b: 0x00d0,     #  CYRILLIC SMALL LETTER EL
+    0x043c: 0x00d2,     #  CYRILLIC SMALL LETTER EM
+    0x043d: 0x00d4,     #  CYRILLIC SMALL LETTER EN
+    0x043e: 0x00d6,     #  CYRILLIC SMALL LETTER O
+    0x043f: 0x00d8,     #  CYRILLIC SMALL LETTER PE
+    0x0440: 0x00e1,     #  CYRILLIC SMALL LETTER ER
+    0x0441: 0x00e3,     #  CYRILLIC SMALL LETTER ES
+    0x0442: 0x00e5,     #  CYRILLIC SMALL LETTER TE
+    0x0443: 0x00e7,     #  CYRILLIC SMALL LETTER U
+    0x0444: 0x00aa,     #  CYRILLIC SMALL LETTER EF
+    0x0445: 0x00b5,     #  CYRILLIC SMALL LETTER HA
+    0x0446: 0x00a4,     #  CYRILLIC SMALL LETTER TSE
+    0x0447: 0x00fb,     #  CYRILLIC SMALL LETTER CHE
+    0x0448: 0x00f5,     #  CYRILLIC SMALL LETTER SHA
+    0x0449: 0x00f9,     #  CYRILLIC SMALL LETTER SHCHA
+    0x044a: 0x009e,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x044b: 0x00f1,     #  CYRILLIC SMALL LETTER YERU
+    0x044c: 0x00ed,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x044d: 0x00f7,     #  CYRILLIC SMALL LETTER E
+    0x044e: 0x009c,     #  CYRILLIC SMALL LETTER YU
+    0x044f: 0x00de,     #  CYRILLIC SMALL LETTER YA
+    0x0451: 0x0084,     #  CYRILLIC SMALL LETTER IO
+    0x0452: 0x0080,     #  CYRILLIC SMALL LETTER DJE
+    0x0453: 0x0082,     #  CYRILLIC SMALL LETTER GJE
+    0x0454: 0x0086,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x0455: 0x0088,     #  CYRILLIC SMALL LETTER DZE
+    0x0456: 0x008a,     #  CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    0x0457: 0x008c,     #  CYRILLIC SMALL LETTER YI
+    0x0458: 0x008e,     #  CYRILLIC SMALL LETTER JE
+    0x0459: 0x0090,     #  CYRILLIC SMALL LETTER LJE
+    0x045a: 0x0092,     #  CYRILLIC SMALL LETTER NJE
+    0x045b: 0x0094,     #  CYRILLIC SMALL LETTER TSHE
+    0x045c: 0x0096,     #  CYRILLIC SMALL LETTER KJE
+    0x045e: 0x0098,     #  CYRILLIC SMALL LETTER SHORT U
+    0x045f: 0x009a,     #  CYRILLIC SMALL LETTER DZHE
+    0x2116: 0x00ef,     #  NUMERO SIGN
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp856.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp856.py
new file mode 100644
index 0000000000000000000000000000000000000000..cacbfb2f80475e7bc9176e2438539d51a8dbed9f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp856.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp856 generated from 'MAPPINGS/VENDORS/MISC/CP856.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp856',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u05d0'   #  0x80 -> HEBREW LETTER ALEF
+    '\u05d1'   #  0x81 -> HEBREW LETTER BET
+    '\u05d2'   #  0x82 -> HEBREW LETTER GIMEL
+    '\u05d3'   #  0x83 -> HEBREW LETTER DALET
+    '\u05d4'   #  0x84 -> HEBREW LETTER HE
+    '\u05d5'   #  0x85 -> HEBREW LETTER VAV
+    '\u05d6'   #  0x86 -> HEBREW LETTER ZAYIN
+    '\u05d7'   #  0x87 -> HEBREW LETTER HET
+    '\u05d8'   #  0x88 -> HEBREW LETTER TET
+    '\u05d9'   #  0x89 -> HEBREW LETTER YOD
+    '\u05da'   #  0x8A -> HEBREW LETTER FINAL KAF
+    '\u05db'   #  0x8B -> HEBREW LETTER KAF
+    '\u05dc'   #  0x8C -> HEBREW LETTER LAMED
+    '\u05dd'   #  0x8D -> HEBREW LETTER FINAL MEM
+    '\u05de'   #  0x8E -> HEBREW LETTER MEM
+    '\u05df'   #  0x8F -> HEBREW LETTER FINAL NUN
+    '\u05e0'   #  0x90 -> HEBREW LETTER NUN
+    '\u05e1'   #  0x91 -> HEBREW LETTER SAMEKH
+    '\u05e2'   #  0x92 -> HEBREW LETTER AYIN
+    '\u05e3'   #  0x93 -> HEBREW LETTER FINAL PE
+    '\u05e4'   #  0x94 -> HEBREW LETTER PE
+    '\u05e5'   #  0x95 -> HEBREW LETTER FINAL TSADI
+    '\u05e6'   #  0x96 -> HEBREW LETTER TSADI
+    '\u05e7'   #  0x97 -> HEBREW LETTER QOF
+    '\u05e8'   #  0x98 -> HEBREW LETTER RESH
+    '\u05e9'   #  0x99 -> HEBREW LETTER SHIN
+    '\u05ea'   #  0x9A -> HEBREW LETTER TAV
+    '\ufffe'   #  0x9B -> UNDEFINED
+    '\xa3'     #  0x9C -> POUND SIGN
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\xd7'     #  0x9E -> MULTIPLICATION SIGN
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\ufffe'   #  0xA0 -> UNDEFINED
+    '\ufffe'   #  0xA1 -> UNDEFINED
+    '\ufffe'   #  0xA2 -> UNDEFINED
+    '\ufffe'   #  0xA3 -> UNDEFINED
+    '\ufffe'   #  0xA4 -> UNDEFINED
+    '\ufffe'   #  0xA5 -> UNDEFINED
+    '\ufffe'   #  0xA6 -> UNDEFINED
+    '\ufffe'   #  0xA7 -> UNDEFINED
+    '\ufffe'   #  0xA8 -> UNDEFINED
+    '\xae'     #  0xA9 -> REGISTERED SIGN
+    '\xac'     #  0xAA -> NOT SIGN
+    '\xbd'     #  0xAB -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0xAC -> VULGAR FRACTION ONE QUARTER
+    '\ufffe'   #  0xAD -> UNDEFINED
+    '\xab'     #  0xAE -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xAF -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0xB0 -> LIGHT SHADE
+    '\u2592'   #  0xB1 -> MEDIUM SHADE
+    '\u2593'   #  0xB2 -> DARK SHADE
+    '\u2502'   #  0xB3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0xB4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\ufffe'   #  0xB5 -> UNDEFINED
+    '\ufffe'   #  0xB6 -> UNDEFINED
+    '\ufffe'   #  0xB7 -> UNDEFINED
+    '\xa9'     #  0xB8 -> COPYRIGHT SIGN
+    '\u2563'   #  0xB9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0xBA -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0xBB -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0xBC -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\xa2'     #  0xBD -> CENT SIGN
+    '\xa5'     #  0xBE -> YEN SIGN
+    '\u2510'   #  0xBF -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0xC0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0xC1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0xC2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0xC3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0xC4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0xC5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\ufffe'   #  0xC6 -> UNDEFINED
+    '\ufffe'   #  0xC7 -> UNDEFINED
+    '\u255a'   #  0xC8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0xC9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0xCA -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0xCB -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0xCC -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0xCD -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0xCE -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0xCF -> CURRENCY SIGN
+    '\ufffe'   #  0xD0 -> UNDEFINED
+    '\ufffe'   #  0xD1 -> UNDEFINED
+    '\ufffe'   #  0xD2 -> UNDEFINED
+    '\ufffe'   #  0xD3 -> UNDEFINEDS
+    '\ufffe'   #  0xD4 -> UNDEFINED
+    '\ufffe'   #  0xD5 -> UNDEFINED
+    '\ufffe'   #  0xD6 -> UNDEFINEDE
+    '\ufffe'   #  0xD7 -> UNDEFINED
+    '\ufffe'   #  0xD8 -> UNDEFINED
+    '\u2518'   #  0xD9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0xDA -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0xDB -> FULL BLOCK
+    '\u2584'   #  0xDC -> LOWER HALF BLOCK
+    '\xa6'     #  0xDD -> BROKEN BAR
+    '\ufffe'   #  0xDE -> UNDEFINED
+    '\u2580'   #  0xDF -> UPPER HALF BLOCK
+    '\ufffe'   #  0xE0 -> UNDEFINED
+    '\ufffe'   #  0xE1 -> UNDEFINED
+    '\ufffe'   #  0xE2 -> UNDEFINED
+    '\ufffe'   #  0xE3 -> UNDEFINED
+    '\ufffe'   #  0xE4 -> UNDEFINED
+    '\ufffe'   #  0xE5 -> UNDEFINED
+    '\xb5'     #  0xE6 -> MICRO SIGN
+    '\ufffe'   #  0xE7 -> UNDEFINED
+    '\ufffe'   #  0xE8 -> UNDEFINED
+    '\ufffe'   #  0xE9 -> UNDEFINED
+    '\ufffe'   #  0xEA -> UNDEFINED
+    '\ufffe'   #  0xEB -> UNDEFINED
+    '\ufffe'   #  0xEC -> UNDEFINED
+    '\ufffe'   #  0xED -> UNDEFINED
+    '\xaf'     #  0xEE -> MACRON
+    '\xb4'     #  0xEF -> ACUTE ACCENT
+    '\xad'     #  0xF0 -> SOFT HYPHEN
+    '\xb1'     #  0xF1 -> PLUS-MINUS SIGN
+    '\u2017'   #  0xF2 -> DOUBLE LOW LINE
+    '\xbe'     #  0xF3 -> VULGAR FRACTION THREE QUARTERS
+    '\xb6'     #  0xF4 -> PILCROW SIGN
+    '\xa7'     #  0xF5 -> SECTION SIGN
+    '\xf7'     #  0xF6 -> DIVISION SIGN
+    '\xb8'     #  0xF7 -> CEDILLA
+    '\xb0'     #  0xF8 -> DEGREE SIGN
+    '\xa8'     #  0xF9 -> DIAERESIS
+    '\xb7'     #  0xFA -> MIDDLE DOT
+    '\xb9'     #  0xFB -> SUPERSCRIPT ONE
+    '\xb3'     #  0xFC -> SUPERSCRIPT THREE
+    '\xb2'     #  0xFD -> SUPERSCRIPT TWO
+    '\u25a0'   #  0xFE -> BLACK SQUARE
+    '\xa0'     #  0xFF -> NO-BREAK SPACE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp857.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp857.py
new file mode 100644
index 0000000000000000000000000000000000000000..741b059b9a26f66d82432dab7f327d2a7ad603b4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp857.py
@@ -0,0 +1,694 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP857.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp857',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x0131,     #  LATIN SMALL LETTER DOTLESS I
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x0130,     #  LATIN CAPITAL LETTER I WITH DOT ABOVE
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x015e,     #  LATIN CAPITAL LETTER S WITH CEDILLA
+    0x009f: 0x015f,     #  LATIN SMALL LETTER S WITH CEDILLA
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x011e,     #  LATIN CAPITAL LETTER G WITH BREVE
+    0x00a7: 0x011f,     #  LATIN SMALL LETTER G WITH BREVE
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x00ae,     #  REGISTERED SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00b6: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00b7: 0x00c0,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00b8: 0x00a9,     #  COPYRIGHT SIGN
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x00a2,     #  CENT SIGN
+    0x00be: 0x00a5,     #  YEN SIGN
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x00e3,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00c7: 0x00c3,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x00a4,     #  CURRENCY SIGN
+    0x00d0: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00d1: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00d2: 0x00ca,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00d3: 0x00cb,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00d4: 0x00c8,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00d5: None,       #  UNDEFINED
+    0x00d6: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d7: 0x00ce,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00d8: 0x00cf,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x00a6,     #  BROKEN BAR
+    0x00de: 0x00cc,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00e3: 0x00d2,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00e4: 0x00f5,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00e5: 0x00d5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: None,       #  UNDEFINED
+    0x00e8: 0x00d7,     #  MULTIPLICATION SIGN
+    0x00e9: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00ea: 0x00db,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00eb: 0x00d9,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00ed: 0x00ff,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x00ee: 0x00af,     #  MACRON
+    0x00ef: 0x00b4,     #  ACUTE ACCENT
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: None,       #  UNDEFINED
+    0x00f3: 0x00be,     #  VULGAR FRACTION THREE QUARTERS
+    0x00f4: 0x00b6,     #  PILCROW SIGN
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x00b8,     #  CEDILLA
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x00a8,     #  DIAERESIS
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x00b9,     #  SUPERSCRIPT ONE
+    0x00fc: 0x00b3,     #  SUPERSCRIPT THREE
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u0131'   #  0x008d -> LATIN SMALL LETTER DOTLESS I
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\u0130'   #  0x0098 -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u015e'   #  0x009e -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\u015f'   #  0x009f -> LATIN SMALL LETTER S WITH CEDILLA
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\u011e'   #  0x00a6 -> LATIN CAPITAL LETTER G WITH BREVE
+    '\u011f'   #  0x00a7 -> LATIN SMALL LETTER G WITH BREVE
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\xae'     #  0x00a9 -> REGISTERED SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\xc1'     #  0x00b5 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0x00b6 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc0'     #  0x00b7 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xa9'     #  0x00b8 -> COPYRIGHT SIGN
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\xa2'     #  0x00bd -> CENT SIGN
+    '\xa5'     #  0x00be -> YEN SIGN
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\xe3'     #  0x00c6 -> LATIN SMALL LETTER A WITH TILDE
+    '\xc3'     #  0x00c7 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0x00cf -> CURRENCY SIGN
+    '\xba'     #  0x00d0 -> MASCULINE ORDINAL INDICATOR
+    '\xaa'     #  0x00d1 -> FEMININE ORDINAL INDICATOR
+    '\xca'     #  0x00d2 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x00d3 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x00d4 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\ufffe'   #  0x00d5 -> UNDEFINED
+    '\xcd'     #  0x00d6 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x00d7 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x00d8 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\xa6'     #  0x00dd -> BROKEN BAR
+    '\xcc'     #  0x00de -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\xd3'     #  0x00e0 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\xd4'     #  0x00e2 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd2'     #  0x00e3 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xf5'     #  0x00e4 -> LATIN SMALL LETTER O WITH TILDE
+    '\xd5'     #  0x00e5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\ufffe'   #  0x00e7 -> UNDEFINED
+    '\xd7'     #  0x00e8 -> MULTIPLICATION SIGN
+    '\xda'     #  0x00e9 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0x00ea -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0x00eb -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xec'     #  0x00ec -> LATIN SMALL LETTER I WITH GRAVE
+    '\xff'     #  0x00ed -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xaf'     #  0x00ee -> MACRON
+    '\xb4'     #  0x00ef -> ACUTE ACCENT
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\ufffe'   #  0x00f2 -> UNDEFINED
+    '\xbe'     #  0x00f3 -> VULGAR FRACTION THREE QUARTERS
+    '\xb6'     #  0x00f4 -> PILCROW SIGN
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\xb8'     #  0x00f7 -> CEDILLA
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\xa8'     #  0x00f9 -> DIAERESIS
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\xb9'     #  0x00fb -> SUPERSCRIPT ONE
+    '\xb3'     #  0x00fc -> SUPERSCRIPT THREE
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x00bd,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x00cf,     #  CURRENCY SIGN
+    0x00a5: 0x00be,     #  YEN SIGN
+    0x00a6: 0x00dd,     #  BROKEN BAR
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a8: 0x00f9,     #  DIAERESIS
+    0x00a9: 0x00b8,     #  COPYRIGHT SIGN
+    0x00aa: 0x00d1,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00ae: 0x00a9,     #  REGISTERED SIGN
+    0x00af: 0x00ee,     #  MACRON
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b3: 0x00fc,     #  SUPERSCRIPT THREE
+    0x00b4: 0x00ef,     #  ACUTE ACCENT
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b6: 0x00f4,     #  PILCROW SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00b8: 0x00f7,     #  CEDILLA
+    0x00b9: 0x00fb,     #  SUPERSCRIPT ONE
+    0x00ba: 0x00d0,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00be: 0x00f3,     #  VULGAR FRACTION THREE QUARTERS
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c0: 0x00b7,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00c1: 0x00b5,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c2: 0x00b6,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c3: 0x00c7,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c8: 0x00d4,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00ca: 0x00d2,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00cb: 0x00d3,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00cc: 0x00de,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00cd: 0x00d6,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00ce: 0x00d7,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00cf: 0x00d8,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d2: 0x00e3,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00d3: 0x00e0,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d4: 0x00e2,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d5: 0x00e5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d7: 0x00e8,     #  MULTIPLICATION SIGN
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00d9: 0x00eb,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00da: 0x00e9,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00db: 0x00ea,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e3: 0x00c6,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ec: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f5: 0x00e4,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00ff: 0x00ed,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x011e: 0x00a6,     #  LATIN CAPITAL LETTER G WITH BREVE
+    0x011f: 0x00a7,     #  LATIN SMALL LETTER G WITH BREVE
+    0x0130: 0x0098,     #  LATIN CAPITAL LETTER I WITH DOT ABOVE
+    0x0131: 0x008d,     #  LATIN SMALL LETTER DOTLESS I
+    0x015e: 0x009e,     #  LATIN CAPITAL LETTER S WITH CEDILLA
+    0x015f: 0x009f,     #  LATIN SMALL LETTER S WITH CEDILLA
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp858.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp858.py
new file mode 100644
index 0000000000000000000000000000000000000000..7579f52538686c27185835344ec02c2311c9d9d2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp858.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec for CP858, modified from cp850.
+
+"""
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp858',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00ff,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x00d7,     #  MULTIPLICATION SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x00ae,     #  REGISTERED SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00b6: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00b7: 0x00c0,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00b8: 0x00a9,     #  COPYRIGHT SIGN
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x00a2,     #  CENT SIGN
+    0x00be: 0x00a5,     #  YEN SIGN
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x00e3,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00c7: 0x00c3,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x00a4,     #  CURRENCY SIGN
+    0x00d0: 0x00f0,     #  LATIN SMALL LETTER ETH
+    0x00d1: 0x00d0,     #  LATIN CAPITAL LETTER ETH
+    0x00d2: 0x00ca,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00d3: 0x00cb,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00d4: 0x00c8,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00d5: 0x20ac,     #  EURO SIGN
+    0x00d6: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d7: 0x00ce,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00d8: 0x00cf,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x00a6,     #  BROKEN BAR
+    0x00de: 0x00cc,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00e3: 0x00d2,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00e4: 0x00f5,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00e5: 0x00d5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x00fe,     #  LATIN SMALL LETTER THORN
+    0x00e8: 0x00de,     #  LATIN CAPITAL LETTER THORN
+    0x00e9: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00ea: 0x00db,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00eb: 0x00d9,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00ec: 0x00fd,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00ed: 0x00dd,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00ee: 0x00af,     #  MACRON
+    0x00ef: 0x00b4,     #  ACUTE ACCENT
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2017,     #  DOUBLE LOW LINE
+    0x00f3: 0x00be,     #  VULGAR FRACTION THREE QUARTERS
+    0x00f4: 0x00b6,     #  PILCROW SIGN
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x00b8,     #  CEDILLA
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x00a8,     #  DIAERESIS
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x00b9,     #  SUPERSCRIPT ONE
+    0x00fc: 0x00b3,     #  SUPERSCRIPT THREE
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xec'     #  0x008d -> LATIN SMALL LETTER I WITH GRAVE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xff'     #  0x0098 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd7'     #  0x009e -> MULTIPLICATION SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\xae'     #  0x00a9 -> REGISTERED SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\xc1'     #  0x00b5 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0x00b6 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc0'     #  0x00b7 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xa9'     #  0x00b8 -> COPYRIGHT SIGN
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\xa2'     #  0x00bd -> CENT SIGN
+    '\xa5'     #  0x00be -> YEN SIGN
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\xe3'     #  0x00c6 -> LATIN SMALL LETTER A WITH TILDE
+    '\xc3'     #  0x00c7 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa4'     #  0x00cf -> CURRENCY SIGN
+    '\xf0'     #  0x00d0 -> LATIN SMALL LETTER ETH
+    '\xd0'     #  0x00d1 -> LATIN CAPITAL LETTER ETH
+    '\xca'     #  0x00d2 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0x00d3 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0x00d4 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\u20ac'   #  0x00d5 -> EURO SIGN
+    '\xcd'     #  0x00d6 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0x00d7 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0x00d8 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\xa6'     #  0x00dd -> BROKEN BAR
+    '\xcc'     #  0x00de -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\xd3'     #  0x00e0 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\xd4'     #  0x00e2 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd2'     #  0x00e3 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xf5'     #  0x00e4 -> LATIN SMALL LETTER O WITH TILDE
+    '\xd5'     #  0x00e5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\xfe'     #  0x00e7 -> LATIN SMALL LETTER THORN
+    '\xde'     #  0x00e8 -> LATIN CAPITAL LETTER THORN
+    '\xda'     #  0x00e9 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0x00ea -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0x00eb -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xfd'     #  0x00ec -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xdd'     #  0x00ed -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xaf'     #  0x00ee -> MACRON
+    '\xb4'     #  0x00ef -> ACUTE ACCENT
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2017'   #  0x00f2 -> DOUBLE LOW LINE
+    '\xbe'     #  0x00f3 -> VULGAR FRACTION THREE QUARTERS
+    '\xb6'     #  0x00f4 -> PILCROW SIGN
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\xb8'     #  0x00f7 -> CEDILLA
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\xa8'     #  0x00f9 -> DIAERESIS
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\xb9'     #  0x00fb -> SUPERSCRIPT ONE
+    '\xb3'     #  0x00fc -> SUPERSCRIPT THREE
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x00bd,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x00cf,     #  CURRENCY SIGN
+    0x00a5: 0x00be,     #  YEN SIGN
+    0x00a6: 0x00dd,     #  BROKEN BAR
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a8: 0x00f9,     #  DIAERESIS
+    0x00a9: 0x00b8,     #  COPYRIGHT SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00ae: 0x00a9,     #  REGISTERED SIGN
+    0x00af: 0x00ee,     #  MACRON
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b3: 0x00fc,     #  SUPERSCRIPT THREE
+    0x00b4: 0x00ef,     #  ACUTE ACCENT
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b6: 0x00f4,     #  PILCROW SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00b8: 0x00f7,     #  CEDILLA
+    0x00b9: 0x00fb,     #  SUPERSCRIPT ONE
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00be: 0x00f3,     #  VULGAR FRACTION THREE QUARTERS
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c0: 0x00b7,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00c1: 0x00b5,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c2: 0x00b6,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c3: 0x00c7,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c8: 0x00d4,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00ca: 0x00d2,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00cb: 0x00d3,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00cc: 0x00de,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00cd: 0x00d6,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00ce: 0x00d7,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00cf: 0x00d8,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d0: 0x00d1,     #  LATIN CAPITAL LETTER ETH
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d2: 0x00e3,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00d3: 0x00e0,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d4: 0x00e2,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d5: 0x00e5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d7: 0x009e,     #  MULTIPLICATION SIGN
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00d9: 0x00eb,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00da: 0x00e9,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00db: 0x00ea,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00dd: 0x00ed,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00de: 0x00e8,     #  LATIN CAPITAL LETTER THORN
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e3: 0x00c6,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ec: 0x008d,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f0: 0x00d0,     #  LATIN SMALL LETTER ETH
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f5: 0x00e4,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00fd: 0x00ec,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00fe: 0x00e7,     #  LATIN SMALL LETTER THORN
+    0x00ff: 0x0098,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x20ac: 0x00d5,     #  EURO SIGN
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x2017: 0x00f2,     #  DOUBLE LOW LINE
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp860.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp860.py
new file mode 100644
index 0000000000000000000000000000000000000000..65903e74641873f751715cbc8afee4462ebd72a1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp860.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP860.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp860',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e3,     #  LATIN SMALL LETTER A WITH TILDE
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00ca,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x008c: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x008d: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x008e: 0x00c3,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x008f: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00c0,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x0092: 0x00c8,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f5,     #  LATIN SMALL LETTER O WITH TILDE
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00cc,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x0099: 0x00d5,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00a2,     #  CENT SIGN
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d9,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x009e: 0x20a7,     #  PESETA SIGN
+    0x009f: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x00d2,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0x0084 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xc1'     #  0x0086 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xca'     #  0x0089 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xcd'     #  0x008b -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xd4'     #  0x008c -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xec'     #  0x008d -> LATIN SMALL LETTER I WITH GRAVE
+    '\xc3'     #  0x008e -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc2'     #  0x008f -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xc0'     #  0x0091 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc8'     #  0x0092 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0x0094 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xda'     #  0x0096 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xcc'     #  0x0098 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd5'     #  0x0099 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xa2'     #  0x009b -> CENT SIGN
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd9'     #  0x009d -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\u20a7'   #  0x009e -> PESETA SIGN
+    '\xd3'     #  0x009f -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\xd2'     #  0x00a9 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x009b,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c0: 0x0091,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00c1: 0x0086,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c2: 0x008f,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c3: 0x008e,     #  LATIN CAPITAL LETTER A WITH TILDE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c8: 0x0092,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00ca: 0x0089,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00cc: 0x0098,     #  LATIN CAPITAL LETTER I WITH GRAVE
+    0x00cd: 0x008b,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d2: 0x00a9,     #  LATIN CAPITAL LETTER O WITH GRAVE
+    0x00d3: 0x009f,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d4: 0x008c,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d5: 0x0099,     #  LATIN CAPITAL LETTER O WITH TILDE
+    0x00d9: 0x009d,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00da: 0x0096,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e3: 0x0084,     #  LATIN SMALL LETTER A WITH TILDE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00ec: 0x008d,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f5: 0x0094,     #  LATIN SMALL LETTER O WITH TILDE
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x20a7: 0x009e,     #  PESETA SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp861.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp861.py
new file mode 100644
index 0000000000000000000000000000000000000000..860a05fa3f4f1b64c9a417e10c58d939d94ad136
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp861.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP861.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp861',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00d0,     #  LATIN CAPITAL LETTER ETH
+    0x008c: 0x00f0,     #  LATIN SMALL LETTER ETH
+    0x008d: 0x00de,     #  LATIN CAPITAL LETTER THORN
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00fe,     #  LATIN SMALL LETTER THORN
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00dd,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x0098: 0x00fd,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x20a7,     #  PESETA SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00c1,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00a5: 0x00cd,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00a6: 0x00d3,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00a7: 0x00da,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x2310,     #  REVERSED NOT SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xd0'     #  0x008b -> LATIN CAPITAL LETTER ETH
+    '\xf0'     #  0x008c -> LATIN SMALL LETTER ETH
+    '\xde'     #  0x008d -> LATIN CAPITAL LETTER THORN
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xfe'     #  0x0095 -> LATIN SMALL LETTER THORN
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xdd'     #  0x0097 -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xfd'     #  0x0098 -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u20a7'   #  0x009e -> PESETA SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xc1'     #  0x00a4 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xcd'     #  0x00a5 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xd3'     #  0x00a6 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xda'     #  0x00a7 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\u2310'   #  0x00a9 -> REVERSED NOT SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c1: 0x00a4,     #  LATIN CAPITAL LETTER A WITH ACUTE
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00cd: 0x00a5,     #  LATIN CAPITAL LETTER I WITH ACUTE
+    0x00d0: 0x008b,     #  LATIN CAPITAL LETTER ETH
+    0x00d3: 0x00a6,     #  LATIN CAPITAL LETTER O WITH ACUTE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00da: 0x00a7,     #  LATIN CAPITAL LETTER U WITH ACUTE
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00dd: 0x0097,     #  LATIN CAPITAL LETTER Y WITH ACUTE
+    0x00de: 0x008d,     #  LATIN CAPITAL LETTER THORN
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00f0: 0x008c,     #  LATIN SMALL LETTER ETH
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00fd: 0x0098,     #  LATIN SMALL LETTER Y WITH ACUTE
+    0x00fe: 0x0095,     #  LATIN SMALL LETTER THORN
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x20a7: 0x009e,     #  PESETA SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2310: 0x00a9,     #  REVERSED NOT SIGN
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp862.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp862.py
new file mode 100644
index 0000000000000000000000000000000000000000..3df22f997b728eda96ad43b56bcf5f0894295449
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp862.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP862.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp862',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x05d0,     #  HEBREW LETTER ALEF
+    0x0081: 0x05d1,     #  HEBREW LETTER BET
+    0x0082: 0x05d2,     #  HEBREW LETTER GIMEL
+    0x0083: 0x05d3,     #  HEBREW LETTER DALET
+    0x0084: 0x05d4,     #  HEBREW LETTER HE
+    0x0085: 0x05d5,     #  HEBREW LETTER VAV
+    0x0086: 0x05d6,     #  HEBREW LETTER ZAYIN
+    0x0087: 0x05d7,     #  HEBREW LETTER HET
+    0x0088: 0x05d8,     #  HEBREW LETTER TET
+    0x0089: 0x05d9,     #  HEBREW LETTER YOD
+    0x008a: 0x05da,     #  HEBREW LETTER FINAL KAF
+    0x008b: 0x05db,     #  HEBREW LETTER KAF
+    0x008c: 0x05dc,     #  HEBREW LETTER LAMED
+    0x008d: 0x05dd,     #  HEBREW LETTER FINAL MEM
+    0x008e: 0x05de,     #  HEBREW LETTER MEM
+    0x008f: 0x05df,     #  HEBREW LETTER FINAL NUN
+    0x0090: 0x05e0,     #  HEBREW LETTER NUN
+    0x0091: 0x05e1,     #  HEBREW LETTER SAMEKH
+    0x0092: 0x05e2,     #  HEBREW LETTER AYIN
+    0x0093: 0x05e3,     #  HEBREW LETTER FINAL PE
+    0x0094: 0x05e4,     #  HEBREW LETTER PE
+    0x0095: 0x05e5,     #  HEBREW LETTER FINAL TSADI
+    0x0096: 0x05e6,     #  HEBREW LETTER TSADI
+    0x0097: 0x05e7,     #  HEBREW LETTER QOF
+    0x0098: 0x05e8,     #  HEBREW LETTER RESH
+    0x0099: 0x05e9,     #  HEBREW LETTER SHIN
+    0x009a: 0x05ea,     #  HEBREW LETTER TAV
+    0x009b: 0x00a2,     #  CENT SIGN
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00a5,     #  YEN SIGN
+    0x009e: 0x20a7,     #  PESETA SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x2310,     #  REVERSED NOT SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S (GERMAN)
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u05d0'   #  0x0080 -> HEBREW LETTER ALEF
+    '\u05d1'   #  0x0081 -> HEBREW LETTER BET
+    '\u05d2'   #  0x0082 -> HEBREW LETTER GIMEL
+    '\u05d3'   #  0x0083 -> HEBREW LETTER DALET
+    '\u05d4'   #  0x0084 -> HEBREW LETTER HE
+    '\u05d5'   #  0x0085 -> HEBREW LETTER VAV
+    '\u05d6'   #  0x0086 -> HEBREW LETTER ZAYIN
+    '\u05d7'   #  0x0087 -> HEBREW LETTER HET
+    '\u05d8'   #  0x0088 -> HEBREW LETTER TET
+    '\u05d9'   #  0x0089 -> HEBREW LETTER YOD
+    '\u05da'   #  0x008a -> HEBREW LETTER FINAL KAF
+    '\u05db'   #  0x008b -> HEBREW LETTER KAF
+    '\u05dc'   #  0x008c -> HEBREW LETTER LAMED
+    '\u05dd'   #  0x008d -> HEBREW LETTER FINAL MEM
+    '\u05de'   #  0x008e -> HEBREW LETTER MEM
+    '\u05df'   #  0x008f -> HEBREW LETTER FINAL NUN
+    '\u05e0'   #  0x0090 -> HEBREW LETTER NUN
+    '\u05e1'   #  0x0091 -> HEBREW LETTER SAMEKH
+    '\u05e2'   #  0x0092 -> HEBREW LETTER AYIN
+    '\u05e3'   #  0x0093 -> HEBREW LETTER FINAL PE
+    '\u05e4'   #  0x0094 -> HEBREW LETTER PE
+    '\u05e5'   #  0x0095 -> HEBREW LETTER FINAL TSADI
+    '\u05e6'   #  0x0096 -> HEBREW LETTER TSADI
+    '\u05e7'   #  0x0097 -> HEBREW LETTER QOF
+    '\u05e8'   #  0x0098 -> HEBREW LETTER RESH
+    '\u05e9'   #  0x0099 -> HEBREW LETTER SHIN
+    '\u05ea'   #  0x009a -> HEBREW LETTER TAV
+    '\xa2'     #  0x009b -> CENT SIGN
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xa5'     #  0x009d -> YEN SIGN
+    '\u20a7'   #  0x009e -> PESETA SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\u2310'   #  0x00a9 -> REVERSED NOT SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a2: 0x009b,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a5: 0x009d,     #  YEN SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S (GERMAN)
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x05d0: 0x0080,     #  HEBREW LETTER ALEF
+    0x05d1: 0x0081,     #  HEBREW LETTER BET
+    0x05d2: 0x0082,     #  HEBREW LETTER GIMEL
+    0x05d3: 0x0083,     #  HEBREW LETTER DALET
+    0x05d4: 0x0084,     #  HEBREW LETTER HE
+    0x05d5: 0x0085,     #  HEBREW LETTER VAV
+    0x05d6: 0x0086,     #  HEBREW LETTER ZAYIN
+    0x05d7: 0x0087,     #  HEBREW LETTER HET
+    0x05d8: 0x0088,     #  HEBREW LETTER TET
+    0x05d9: 0x0089,     #  HEBREW LETTER YOD
+    0x05da: 0x008a,     #  HEBREW LETTER FINAL KAF
+    0x05db: 0x008b,     #  HEBREW LETTER KAF
+    0x05dc: 0x008c,     #  HEBREW LETTER LAMED
+    0x05dd: 0x008d,     #  HEBREW LETTER FINAL MEM
+    0x05de: 0x008e,     #  HEBREW LETTER MEM
+    0x05df: 0x008f,     #  HEBREW LETTER FINAL NUN
+    0x05e0: 0x0090,     #  HEBREW LETTER NUN
+    0x05e1: 0x0091,     #  HEBREW LETTER SAMEKH
+    0x05e2: 0x0092,     #  HEBREW LETTER AYIN
+    0x05e3: 0x0093,     #  HEBREW LETTER FINAL PE
+    0x05e4: 0x0094,     #  HEBREW LETTER PE
+    0x05e5: 0x0095,     #  HEBREW LETTER FINAL TSADI
+    0x05e6: 0x0096,     #  HEBREW LETTER TSADI
+    0x05e7: 0x0097,     #  HEBREW LETTER QOF
+    0x05e8: 0x0098,     #  HEBREW LETTER RESH
+    0x05e9: 0x0099,     #  HEBREW LETTER SHIN
+    0x05ea: 0x009a,     #  HEBREW LETTER TAV
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x20a7: 0x009e,     #  PESETA SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2310: 0x00a9,     #  REVERSED NOT SIGN
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp863.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp863.py
new file mode 100644
index 0000000000000000000000000000000000000000..764180b623271cf8ae9f68ed5932e1ea464f54ee
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp863.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP863.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp863',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00c2,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00b6,     #  PILCROW SIGN
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x2017,     #  DOUBLE LOW LINE
+    0x008e: 0x00c0,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x008f: 0x00a7,     #  SECTION SIGN
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00c8,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x0092: 0x00ca,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00cb,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x0095: 0x00cf,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00a4,     #  CURRENCY SIGN
+    0x0099: 0x00d4,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00a2,     #  CENT SIGN
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d9,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x009e: 0x00db,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00a6,     #  BROKEN BAR
+    0x00a1: 0x00b4,     #  ACUTE ACCENT
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00a8,     #  DIAERESIS
+    0x00a5: 0x00b8,     #  CEDILLA
+    0x00a6: 0x00b3,     #  SUPERSCRIPT THREE
+    0x00a7: 0x00af,     #  MACRON
+    0x00a8: 0x00ce,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00a9: 0x2310,     #  REVERSED NOT SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00be,     #  VULGAR FRACTION THREE QUARTERS
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xc2'     #  0x0084 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xb6'     #  0x0086 -> PILCROW SIGN
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u2017'   #  0x008d -> DOUBLE LOW LINE
+    '\xc0'     #  0x008e -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xa7'     #  0x008f -> SECTION SIGN
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xc8'     #  0x0091 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xca'     #  0x0092 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xcb'     #  0x0094 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcf'     #  0x0095 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xa4'     #  0x0098 -> CURRENCY SIGN
+    '\xd4'     #  0x0099 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xa2'     #  0x009b -> CENT SIGN
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd9'     #  0x009d -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xdb'     #  0x009e -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xa6'     #  0x00a0 -> BROKEN BAR
+    '\xb4'     #  0x00a1 -> ACUTE ACCENT
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xa8'     #  0x00a4 -> DIAERESIS
+    '\xb8'     #  0x00a5 -> CEDILLA
+    '\xb3'     #  0x00a6 -> SUPERSCRIPT THREE
+    '\xaf'     #  0x00a7 -> MACRON
+    '\xce'     #  0x00a8 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\u2310'   #  0x00a9 -> REVERSED NOT SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xbe'     #  0x00ad -> VULGAR FRACTION THREE QUARTERS
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a2: 0x009b,     #  CENT SIGN
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x0098,     #  CURRENCY SIGN
+    0x00a6: 0x00a0,     #  BROKEN BAR
+    0x00a7: 0x008f,     #  SECTION SIGN
+    0x00a8: 0x00a4,     #  DIAERESIS
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00af: 0x00a7,     #  MACRON
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b3: 0x00a6,     #  SUPERSCRIPT THREE
+    0x00b4: 0x00a1,     #  ACUTE ACCENT
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b6: 0x0086,     #  PILCROW SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00b8: 0x00a5,     #  CEDILLA
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00be: 0x00ad,     #  VULGAR FRACTION THREE QUARTERS
+    0x00c0: 0x008e,     #  LATIN CAPITAL LETTER A WITH GRAVE
+    0x00c2: 0x0084,     #  LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c8: 0x0091,     #  LATIN CAPITAL LETTER E WITH GRAVE
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00ca: 0x0092,     #  LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    0x00cb: 0x0094,     #  LATIN CAPITAL LETTER E WITH DIAERESIS
+    0x00ce: 0x00a8,     #  LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    0x00cf: 0x0095,     #  LATIN CAPITAL LETTER I WITH DIAERESIS
+    0x00d4: 0x0099,     #  LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    0x00d9: 0x009d,     #  LATIN CAPITAL LETTER U WITH GRAVE
+    0x00db: 0x009e,     #  LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x2017: 0x008d,     #  DOUBLE LOW LINE
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2310: 0x00a9,     #  REVERSED NOT SIGN
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp864.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp864.py
new file mode 100644
index 0000000000000000000000000000000000000000..53df482dcd617ac6c4d239a9a40b31b9e8ab058f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp864.py
@@ -0,0 +1,690 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP864.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp864',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0025: 0x066a,     #  ARABIC PERCENT SIGN
+    0x0080: 0x00b0,     #  DEGREE SIGN
+    0x0081: 0x00b7,     #  MIDDLE DOT
+    0x0082: 0x2219,     #  BULLET OPERATOR
+    0x0083: 0x221a,     #  SQUARE ROOT
+    0x0084: 0x2592,     #  MEDIUM SHADE
+    0x0085: 0x2500,     #  FORMS LIGHT HORIZONTAL
+    0x0086: 0x2502,     #  FORMS LIGHT VERTICAL
+    0x0087: 0x253c,     #  FORMS LIGHT VERTICAL AND HORIZONTAL
+    0x0088: 0x2524,     #  FORMS LIGHT VERTICAL AND LEFT
+    0x0089: 0x252c,     #  FORMS LIGHT DOWN AND HORIZONTAL
+    0x008a: 0x251c,     #  FORMS LIGHT VERTICAL AND RIGHT
+    0x008b: 0x2534,     #  FORMS LIGHT UP AND HORIZONTAL
+    0x008c: 0x2510,     #  FORMS LIGHT DOWN AND LEFT
+    0x008d: 0x250c,     #  FORMS LIGHT DOWN AND RIGHT
+    0x008e: 0x2514,     #  FORMS LIGHT UP AND RIGHT
+    0x008f: 0x2518,     #  FORMS LIGHT UP AND LEFT
+    0x0090: 0x03b2,     #  GREEK SMALL BETA
+    0x0091: 0x221e,     #  INFINITY
+    0x0092: 0x03c6,     #  GREEK SMALL PHI
+    0x0093: 0x00b1,     #  PLUS-OR-MINUS SIGN
+    0x0094: 0x00bd,     #  FRACTION 1/2
+    0x0095: 0x00bc,     #  FRACTION 1/4
+    0x0096: 0x2248,     #  ALMOST EQUAL TO
+    0x0097: 0x00ab,     #  LEFT POINTING GUILLEMET
+    0x0098: 0x00bb,     #  RIGHT POINTING GUILLEMET
+    0x0099: 0xfef7,     #  ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE ISOLATED FORM
+    0x009a: 0xfef8,     #  ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE FINAL FORM
+    0x009b: None,       #  UNDEFINED
+    0x009c: None,       #  UNDEFINED
+    0x009d: 0xfefb,     #  ARABIC LIGATURE LAM WITH ALEF ISOLATED FORM
+    0x009e: 0xfefc,     #  ARABIC LIGATURE LAM WITH ALEF FINAL FORM
+    0x009f: None,       #  UNDEFINED
+    0x00a1: 0x00ad,     #  SOFT HYPHEN
+    0x00a2: 0xfe82,     #  ARABIC LETTER ALEF WITH MADDA ABOVE FINAL FORM
+    0x00a5: 0xfe84,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE FINAL FORM
+    0x00a6: None,       #  UNDEFINED
+    0x00a7: None,       #  UNDEFINED
+    0x00a8: 0xfe8e,     #  ARABIC LETTER ALEF FINAL FORM
+    0x00a9: 0xfe8f,     #  ARABIC LETTER BEH ISOLATED FORM
+    0x00aa: 0xfe95,     #  ARABIC LETTER TEH ISOLATED FORM
+    0x00ab: 0xfe99,     #  ARABIC LETTER THEH ISOLATED FORM
+    0x00ac: 0x060c,     #  ARABIC COMMA
+    0x00ad: 0xfe9d,     #  ARABIC LETTER JEEM ISOLATED FORM
+    0x00ae: 0xfea1,     #  ARABIC LETTER HAH ISOLATED FORM
+    0x00af: 0xfea5,     #  ARABIC LETTER KHAH ISOLATED FORM
+    0x00b0: 0x0660,     #  ARABIC-INDIC DIGIT ZERO
+    0x00b1: 0x0661,     #  ARABIC-INDIC DIGIT ONE
+    0x00b2: 0x0662,     #  ARABIC-INDIC DIGIT TWO
+    0x00b3: 0x0663,     #  ARABIC-INDIC DIGIT THREE
+    0x00b4: 0x0664,     #  ARABIC-INDIC DIGIT FOUR
+    0x00b5: 0x0665,     #  ARABIC-INDIC DIGIT FIVE
+    0x00b6: 0x0666,     #  ARABIC-INDIC DIGIT SIX
+    0x00b7: 0x0667,     #  ARABIC-INDIC DIGIT SEVEN
+    0x00b8: 0x0668,     #  ARABIC-INDIC DIGIT EIGHT
+    0x00b9: 0x0669,     #  ARABIC-INDIC DIGIT NINE
+    0x00ba: 0xfed1,     #  ARABIC LETTER FEH ISOLATED FORM
+    0x00bb: 0x061b,     #  ARABIC SEMICOLON
+    0x00bc: 0xfeb1,     #  ARABIC LETTER SEEN ISOLATED FORM
+    0x00bd: 0xfeb5,     #  ARABIC LETTER SHEEN ISOLATED FORM
+    0x00be: 0xfeb9,     #  ARABIC LETTER SAD ISOLATED FORM
+    0x00bf: 0x061f,     #  ARABIC QUESTION MARK
+    0x00c0: 0x00a2,     #  CENT SIGN
+    0x00c1: 0xfe80,     #  ARABIC LETTER HAMZA ISOLATED FORM
+    0x00c2: 0xfe81,     #  ARABIC LETTER ALEF WITH MADDA ABOVE ISOLATED FORM
+    0x00c3: 0xfe83,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE ISOLATED FORM
+    0x00c4: 0xfe85,     #  ARABIC LETTER WAW WITH HAMZA ABOVE ISOLATED FORM
+    0x00c5: 0xfeca,     #  ARABIC LETTER AIN FINAL FORM
+    0x00c6: 0xfe8b,     #  ARABIC LETTER YEH WITH HAMZA ABOVE INITIAL FORM
+    0x00c7: 0xfe8d,     #  ARABIC LETTER ALEF ISOLATED FORM
+    0x00c8: 0xfe91,     #  ARABIC LETTER BEH INITIAL FORM
+    0x00c9: 0xfe93,     #  ARABIC LETTER TEH MARBUTA ISOLATED FORM
+    0x00ca: 0xfe97,     #  ARABIC LETTER TEH INITIAL FORM
+    0x00cb: 0xfe9b,     #  ARABIC LETTER THEH INITIAL FORM
+    0x00cc: 0xfe9f,     #  ARABIC LETTER JEEM INITIAL FORM
+    0x00cd: 0xfea3,     #  ARABIC LETTER HAH INITIAL FORM
+    0x00ce: 0xfea7,     #  ARABIC LETTER KHAH INITIAL FORM
+    0x00cf: 0xfea9,     #  ARABIC LETTER DAL ISOLATED FORM
+    0x00d0: 0xfeab,     #  ARABIC LETTER THAL ISOLATED FORM
+    0x00d1: 0xfead,     #  ARABIC LETTER REH ISOLATED FORM
+    0x00d2: 0xfeaf,     #  ARABIC LETTER ZAIN ISOLATED FORM
+    0x00d3: 0xfeb3,     #  ARABIC LETTER SEEN INITIAL FORM
+    0x00d4: 0xfeb7,     #  ARABIC LETTER SHEEN INITIAL FORM
+    0x00d5: 0xfebb,     #  ARABIC LETTER SAD INITIAL FORM
+    0x00d6: 0xfebf,     #  ARABIC LETTER DAD INITIAL FORM
+    0x00d7: 0xfec1,     #  ARABIC LETTER TAH ISOLATED FORM
+    0x00d8: 0xfec5,     #  ARABIC LETTER ZAH ISOLATED FORM
+    0x00d9: 0xfecb,     #  ARABIC LETTER AIN INITIAL FORM
+    0x00da: 0xfecf,     #  ARABIC LETTER GHAIN INITIAL FORM
+    0x00db: 0x00a6,     #  BROKEN VERTICAL BAR
+    0x00dc: 0x00ac,     #  NOT SIGN
+    0x00dd: 0x00f7,     #  DIVISION SIGN
+    0x00de: 0x00d7,     #  MULTIPLICATION SIGN
+    0x00df: 0xfec9,     #  ARABIC LETTER AIN ISOLATED FORM
+    0x00e0: 0x0640,     #  ARABIC TATWEEL
+    0x00e1: 0xfed3,     #  ARABIC LETTER FEH INITIAL FORM
+    0x00e2: 0xfed7,     #  ARABIC LETTER QAF INITIAL FORM
+    0x00e3: 0xfedb,     #  ARABIC LETTER KAF INITIAL FORM
+    0x00e4: 0xfedf,     #  ARABIC LETTER LAM INITIAL FORM
+    0x00e5: 0xfee3,     #  ARABIC LETTER MEEM INITIAL FORM
+    0x00e6: 0xfee7,     #  ARABIC LETTER NOON INITIAL FORM
+    0x00e7: 0xfeeb,     #  ARABIC LETTER HEH INITIAL FORM
+    0x00e8: 0xfeed,     #  ARABIC LETTER WAW ISOLATED FORM
+    0x00e9: 0xfeef,     #  ARABIC LETTER ALEF MAKSURA ISOLATED FORM
+    0x00ea: 0xfef3,     #  ARABIC LETTER YEH INITIAL FORM
+    0x00eb: 0xfebd,     #  ARABIC LETTER DAD ISOLATED FORM
+    0x00ec: 0xfecc,     #  ARABIC LETTER AIN MEDIAL FORM
+    0x00ed: 0xfece,     #  ARABIC LETTER GHAIN FINAL FORM
+    0x00ee: 0xfecd,     #  ARABIC LETTER GHAIN ISOLATED FORM
+    0x00ef: 0xfee1,     #  ARABIC LETTER MEEM ISOLATED FORM
+    0x00f0: 0xfe7d,     #  ARABIC SHADDA MEDIAL FORM
+    0x00f1: 0x0651,     #  ARABIC SHADDAH
+    0x00f2: 0xfee5,     #  ARABIC LETTER NOON ISOLATED FORM
+    0x00f3: 0xfee9,     #  ARABIC LETTER HEH ISOLATED FORM
+    0x00f4: 0xfeec,     #  ARABIC LETTER HEH MEDIAL FORM
+    0x00f5: 0xfef0,     #  ARABIC LETTER ALEF MAKSURA FINAL FORM
+    0x00f6: 0xfef2,     #  ARABIC LETTER YEH FINAL FORM
+    0x00f7: 0xfed0,     #  ARABIC LETTER GHAIN MEDIAL FORM
+    0x00f8: 0xfed5,     #  ARABIC LETTER QAF ISOLATED FORM
+    0x00f9: 0xfef5,     #  ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE ISOLATED FORM
+    0x00fa: 0xfef6,     #  ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE FINAL FORM
+    0x00fb: 0xfedd,     #  ARABIC LETTER LAM ISOLATED FORM
+    0x00fc: 0xfed9,     #  ARABIC LETTER KAF ISOLATED FORM
+    0x00fd: 0xfef1,     #  ARABIC LETTER YEH ISOLATED FORM
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: None,       #  UNDEFINED
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '\u066a'   #  0x0025 -> ARABIC PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xb0'     #  0x0080 -> DEGREE SIGN
+    '\xb7'     #  0x0081 -> MIDDLE DOT
+    '\u2219'   #  0x0082 -> BULLET OPERATOR
+    '\u221a'   #  0x0083 -> SQUARE ROOT
+    '\u2592'   #  0x0084 -> MEDIUM SHADE
+    '\u2500'   #  0x0085 -> FORMS LIGHT HORIZONTAL
+    '\u2502'   #  0x0086 -> FORMS LIGHT VERTICAL
+    '\u253c'   #  0x0087 -> FORMS LIGHT VERTICAL AND HORIZONTAL
+    '\u2524'   #  0x0088 -> FORMS LIGHT VERTICAL AND LEFT
+    '\u252c'   #  0x0089 -> FORMS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x008a -> FORMS LIGHT VERTICAL AND RIGHT
+    '\u2534'   #  0x008b -> FORMS LIGHT UP AND HORIZONTAL
+    '\u2510'   #  0x008c -> FORMS LIGHT DOWN AND LEFT
+    '\u250c'   #  0x008d -> FORMS LIGHT DOWN AND RIGHT
+    '\u2514'   #  0x008e -> FORMS LIGHT UP AND RIGHT
+    '\u2518'   #  0x008f -> FORMS LIGHT UP AND LEFT
+    '\u03b2'   #  0x0090 -> GREEK SMALL BETA
+    '\u221e'   #  0x0091 -> INFINITY
+    '\u03c6'   #  0x0092 -> GREEK SMALL PHI
+    '\xb1'     #  0x0093 -> PLUS-OR-MINUS SIGN
+    '\xbd'     #  0x0094 -> FRACTION 1/2
+    '\xbc'     #  0x0095 -> FRACTION 1/4
+    '\u2248'   #  0x0096 -> ALMOST EQUAL TO
+    '\xab'     #  0x0097 -> LEFT POINTING GUILLEMET
+    '\xbb'     #  0x0098 -> RIGHT POINTING GUILLEMET
+    '\ufef7'   #  0x0099 -> ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE ISOLATED FORM
+    '\ufef8'   #  0x009a -> ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE FINAL FORM
+    '\ufffe'   #  0x009b -> UNDEFINED
+    '\ufffe'   #  0x009c -> UNDEFINED
+    '\ufefb'   #  0x009d -> ARABIC LIGATURE LAM WITH ALEF ISOLATED FORM
+    '\ufefc'   #  0x009e -> ARABIC LIGATURE LAM WITH ALEF FINAL FORM
+    '\ufffe'   #  0x009f -> UNDEFINED
+    '\xa0'     #  0x00a0 -> NON-BREAKING SPACE
+    '\xad'     #  0x00a1 -> SOFT HYPHEN
+    '\ufe82'   #  0x00a2 -> ARABIC LETTER ALEF WITH MADDA ABOVE FINAL FORM
+    '\xa3'     #  0x00a3 -> POUND SIGN
+    '\xa4'     #  0x00a4 -> CURRENCY SIGN
+    '\ufe84'   #  0x00a5 -> ARABIC LETTER ALEF WITH HAMZA ABOVE FINAL FORM
+    '\ufffe'   #  0x00a6 -> UNDEFINED
+    '\ufffe'   #  0x00a7 -> UNDEFINED
+    '\ufe8e'   #  0x00a8 -> ARABIC LETTER ALEF FINAL FORM
+    '\ufe8f'   #  0x00a9 -> ARABIC LETTER BEH ISOLATED FORM
+    '\ufe95'   #  0x00aa -> ARABIC LETTER TEH ISOLATED FORM
+    '\ufe99'   #  0x00ab -> ARABIC LETTER THEH ISOLATED FORM
+    '\u060c'   #  0x00ac -> ARABIC COMMA
+    '\ufe9d'   #  0x00ad -> ARABIC LETTER JEEM ISOLATED FORM
+    '\ufea1'   #  0x00ae -> ARABIC LETTER HAH ISOLATED FORM
+    '\ufea5'   #  0x00af -> ARABIC LETTER KHAH ISOLATED FORM
+    '\u0660'   #  0x00b0 -> ARABIC-INDIC DIGIT ZERO
+    '\u0661'   #  0x00b1 -> ARABIC-INDIC DIGIT ONE
+    '\u0662'   #  0x00b2 -> ARABIC-INDIC DIGIT TWO
+    '\u0663'   #  0x00b3 -> ARABIC-INDIC DIGIT THREE
+    '\u0664'   #  0x00b4 -> ARABIC-INDIC DIGIT FOUR
+    '\u0665'   #  0x00b5 -> ARABIC-INDIC DIGIT FIVE
+    '\u0666'   #  0x00b6 -> ARABIC-INDIC DIGIT SIX
+    '\u0667'   #  0x00b7 -> ARABIC-INDIC DIGIT SEVEN
+    '\u0668'   #  0x00b8 -> ARABIC-INDIC DIGIT EIGHT
+    '\u0669'   #  0x00b9 -> ARABIC-INDIC DIGIT NINE
+    '\ufed1'   #  0x00ba -> ARABIC LETTER FEH ISOLATED FORM
+    '\u061b'   #  0x00bb -> ARABIC SEMICOLON
+    '\ufeb1'   #  0x00bc -> ARABIC LETTER SEEN ISOLATED FORM
+    '\ufeb5'   #  0x00bd -> ARABIC LETTER SHEEN ISOLATED FORM
+    '\ufeb9'   #  0x00be -> ARABIC LETTER SAD ISOLATED FORM
+    '\u061f'   #  0x00bf -> ARABIC QUESTION MARK
+    '\xa2'     #  0x00c0 -> CENT SIGN
+    '\ufe80'   #  0x00c1 -> ARABIC LETTER HAMZA ISOLATED FORM
+    '\ufe81'   #  0x00c2 -> ARABIC LETTER ALEF WITH MADDA ABOVE ISOLATED FORM
+    '\ufe83'   #  0x00c3 -> ARABIC LETTER ALEF WITH HAMZA ABOVE ISOLATED FORM
+    '\ufe85'   #  0x00c4 -> ARABIC LETTER WAW WITH HAMZA ABOVE ISOLATED FORM
+    '\ufeca'   #  0x00c5 -> ARABIC LETTER AIN FINAL FORM
+    '\ufe8b'   #  0x00c6 -> ARABIC LETTER YEH WITH HAMZA ABOVE INITIAL FORM
+    '\ufe8d'   #  0x00c7 -> ARABIC LETTER ALEF ISOLATED FORM
+    '\ufe91'   #  0x00c8 -> ARABIC LETTER BEH INITIAL FORM
+    '\ufe93'   #  0x00c9 -> ARABIC LETTER TEH MARBUTA ISOLATED FORM
+    '\ufe97'   #  0x00ca -> ARABIC LETTER TEH INITIAL FORM
+    '\ufe9b'   #  0x00cb -> ARABIC LETTER THEH INITIAL FORM
+    '\ufe9f'   #  0x00cc -> ARABIC LETTER JEEM INITIAL FORM
+    '\ufea3'   #  0x00cd -> ARABIC LETTER HAH INITIAL FORM
+    '\ufea7'   #  0x00ce -> ARABIC LETTER KHAH INITIAL FORM
+    '\ufea9'   #  0x00cf -> ARABIC LETTER DAL ISOLATED FORM
+    '\ufeab'   #  0x00d0 -> ARABIC LETTER THAL ISOLATED FORM
+    '\ufead'   #  0x00d1 -> ARABIC LETTER REH ISOLATED FORM
+    '\ufeaf'   #  0x00d2 -> ARABIC LETTER ZAIN ISOLATED FORM
+    '\ufeb3'   #  0x00d3 -> ARABIC LETTER SEEN INITIAL FORM
+    '\ufeb7'   #  0x00d4 -> ARABIC LETTER SHEEN INITIAL FORM
+    '\ufebb'   #  0x00d5 -> ARABIC LETTER SAD INITIAL FORM
+    '\ufebf'   #  0x00d6 -> ARABIC LETTER DAD INITIAL FORM
+    '\ufec1'   #  0x00d7 -> ARABIC LETTER TAH ISOLATED FORM
+    '\ufec5'   #  0x00d8 -> ARABIC LETTER ZAH ISOLATED FORM
+    '\ufecb'   #  0x00d9 -> ARABIC LETTER AIN INITIAL FORM
+    '\ufecf'   #  0x00da -> ARABIC LETTER GHAIN INITIAL FORM
+    '\xa6'     #  0x00db -> BROKEN VERTICAL BAR
+    '\xac'     #  0x00dc -> NOT SIGN
+    '\xf7'     #  0x00dd -> DIVISION SIGN
+    '\xd7'     #  0x00de -> MULTIPLICATION SIGN
+    '\ufec9'   #  0x00df -> ARABIC LETTER AIN ISOLATED FORM
+    '\u0640'   #  0x00e0 -> ARABIC TATWEEL
+    '\ufed3'   #  0x00e1 -> ARABIC LETTER FEH INITIAL FORM
+    '\ufed7'   #  0x00e2 -> ARABIC LETTER QAF INITIAL FORM
+    '\ufedb'   #  0x00e3 -> ARABIC LETTER KAF INITIAL FORM
+    '\ufedf'   #  0x00e4 -> ARABIC LETTER LAM INITIAL FORM
+    '\ufee3'   #  0x00e5 -> ARABIC LETTER MEEM INITIAL FORM
+    '\ufee7'   #  0x00e6 -> ARABIC LETTER NOON INITIAL FORM
+    '\ufeeb'   #  0x00e7 -> ARABIC LETTER HEH INITIAL FORM
+    '\ufeed'   #  0x00e8 -> ARABIC LETTER WAW ISOLATED FORM
+    '\ufeef'   #  0x00e9 -> ARABIC LETTER ALEF MAKSURA ISOLATED FORM
+    '\ufef3'   #  0x00ea -> ARABIC LETTER YEH INITIAL FORM
+    '\ufebd'   #  0x00eb -> ARABIC LETTER DAD ISOLATED FORM
+    '\ufecc'   #  0x00ec -> ARABIC LETTER AIN MEDIAL FORM
+    '\ufece'   #  0x00ed -> ARABIC LETTER GHAIN FINAL FORM
+    '\ufecd'   #  0x00ee -> ARABIC LETTER GHAIN ISOLATED FORM
+    '\ufee1'   #  0x00ef -> ARABIC LETTER MEEM ISOLATED FORM
+    '\ufe7d'   #  0x00f0 -> ARABIC SHADDA MEDIAL FORM
+    '\u0651'   #  0x00f1 -> ARABIC SHADDAH
+    '\ufee5'   #  0x00f2 -> ARABIC LETTER NOON ISOLATED FORM
+    '\ufee9'   #  0x00f3 -> ARABIC LETTER HEH ISOLATED FORM
+    '\ufeec'   #  0x00f4 -> ARABIC LETTER HEH MEDIAL FORM
+    '\ufef0'   #  0x00f5 -> ARABIC LETTER ALEF MAKSURA FINAL FORM
+    '\ufef2'   #  0x00f6 -> ARABIC LETTER YEH FINAL FORM
+    '\ufed0'   #  0x00f7 -> ARABIC LETTER GHAIN MEDIAL FORM
+    '\ufed5'   #  0x00f8 -> ARABIC LETTER QAF ISOLATED FORM
+    '\ufef5'   #  0x00f9 -> ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE ISOLATED FORM
+    '\ufef6'   #  0x00fa -> ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE FINAL FORM
+    '\ufedd'   #  0x00fb -> ARABIC LETTER LAM ISOLATED FORM
+    '\ufed9'   #  0x00fc -> ARABIC LETTER KAF ISOLATED FORM
+    '\ufef1'   #  0x00fd -> ARABIC LETTER YEH ISOLATED FORM
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\ufffe'   #  0x00ff -> UNDEFINED
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00a0,     #  NON-BREAKING SPACE
+    0x00a2: 0x00c0,     #  CENT SIGN
+    0x00a3: 0x00a3,     #  POUND SIGN
+    0x00a4: 0x00a4,     #  CURRENCY SIGN
+    0x00a6: 0x00db,     #  BROKEN VERTICAL BAR
+    0x00ab: 0x0097,     #  LEFT POINTING GUILLEMET
+    0x00ac: 0x00dc,     #  NOT SIGN
+    0x00ad: 0x00a1,     #  SOFT HYPHEN
+    0x00b0: 0x0080,     #  DEGREE SIGN
+    0x00b1: 0x0093,     #  PLUS-OR-MINUS SIGN
+    0x00b7: 0x0081,     #  MIDDLE DOT
+    0x00bb: 0x0098,     #  RIGHT POINTING GUILLEMET
+    0x00bc: 0x0095,     #  FRACTION 1/4
+    0x00bd: 0x0094,     #  FRACTION 1/2
+    0x00d7: 0x00de,     #  MULTIPLICATION SIGN
+    0x00f7: 0x00dd,     #  DIVISION SIGN
+    0x03b2: 0x0090,     #  GREEK SMALL BETA
+    0x03c6: 0x0092,     #  GREEK SMALL PHI
+    0x060c: 0x00ac,     #  ARABIC COMMA
+    0x061b: 0x00bb,     #  ARABIC SEMICOLON
+    0x061f: 0x00bf,     #  ARABIC QUESTION MARK
+    0x0640: 0x00e0,     #  ARABIC TATWEEL
+    0x0651: 0x00f1,     #  ARABIC SHADDAH
+    0x0660: 0x00b0,     #  ARABIC-INDIC DIGIT ZERO
+    0x0661: 0x00b1,     #  ARABIC-INDIC DIGIT ONE
+    0x0662: 0x00b2,     #  ARABIC-INDIC DIGIT TWO
+    0x0663: 0x00b3,     #  ARABIC-INDIC DIGIT THREE
+    0x0664: 0x00b4,     #  ARABIC-INDIC DIGIT FOUR
+    0x0665: 0x00b5,     #  ARABIC-INDIC DIGIT FIVE
+    0x0666: 0x00b6,     #  ARABIC-INDIC DIGIT SIX
+    0x0667: 0x00b7,     #  ARABIC-INDIC DIGIT SEVEN
+    0x0668: 0x00b8,     #  ARABIC-INDIC DIGIT EIGHT
+    0x0669: 0x00b9,     #  ARABIC-INDIC DIGIT NINE
+    0x066a: 0x0025,     #  ARABIC PERCENT SIGN
+    0x2219: 0x0082,     #  BULLET OPERATOR
+    0x221a: 0x0083,     #  SQUARE ROOT
+    0x221e: 0x0091,     #  INFINITY
+    0x2248: 0x0096,     #  ALMOST EQUAL TO
+    0x2500: 0x0085,     #  FORMS LIGHT HORIZONTAL
+    0x2502: 0x0086,     #  FORMS LIGHT VERTICAL
+    0x250c: 0x008d,     #  FORMS LIGHT DOWN AND RIGHT
+    0x2510: 0x008c,     #  FORMS LIGHT DOWN AND LEFT
+    0x2514: 0x008e,     #  FORMS LIGHT UP AND RIGHT
+    0x2518: 0x008f,     #  FORMS LIGHT UP AND LEFT
+    0x251c: 0x008a,     #  FORMS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x0088,     #  FORMS LIGHT VERTICAL AND LEFT
+    0x252c: 0x0089,     #  FORMS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x008b,     #  FORMS LIGHT UP AND HORIZONTAL
+    0x253c: 0x0087,     #  FORMS LIGHT VERTICAL AND HORIZONTAL
+    0x2592: 0x0084,     #  MEDIUM SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+    0xfe7d: 0x00f0,     #  ARABIC SHADDA MEDIAL FORM
+    0xfe80: 0x00c1,     #  ARABIC LETTER HAMZA ISOLATED FORM
+    0xfe81: 0x00c2,     #  ARABIC LETTER ALEF WITH MADDA ABOVE ISOLATED FORM
+    0xfe82: 0x00a2,     #  ARABIC LETTER ALEF WITH MADDA ABOVE FINAL FORM
+    0xfe83: 0x00c3,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE ISOLATED FORM
+    0xfe84: 0x00a5,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE FINAL FORM
+    0xfe85: 0x00c4,     #  ARABIC LETTER WAW WITH HAMZA ABOVE ISOLATED FORM
+    0xfe8b: 0x00c6,     #  ARABIC LETTER YEH WITH HAMZA ABOVE INITIAL FORM
+    0xfe8d: 0x00c7,     #  ARABIC LETTER ALEF ISOLATED FORM
+    0xfe8e: 0x00a8,     #  ARABIC LETTER ALEF FINAL FORM
+    0xfe8f: 0x00a9,     #  ARABIC LETTER BEH ISOLATED FORM
+    0xfe91: 0x00c8,     #  ARABIC LETTER BEH INITIAL FORM
+    0xfe93: 0x00c9,     #  ARABIC LETTER TEH MARBUTA ISOLATED FORM
+    0xfe95: 0x00aa,     #  ARABIC LETTER TEH ISOLATED FORM
+    0xfe97: 0x00ca,     #  ARABIC LETTER TEH INITIAL FORM
+    0xfe99: 0x00ab,     #  ARABIC LETTER THEH ISOLATED FORM
+    0xfe9b: 0x00cb,     #  ARABIC LETTER THEH INITIAL FORM
+    0xfe9d: 0x00ad,     #  ARABIC LETTER JEEM ISOLATED FORM
+    0xfe9f: 0x00cc,     #  ARABIC LETTER JEEM INITIAL FORM
+    0xfea1: 0x00ae,     #  ARABIC LETTER HAH ISOLATED FORM
+    0xfea3: 0x00cd,     #  ARABIC LETTER HAH INITIAL FORM
+    0xfea5: 0x00af,     #  ARABIC LETTER KHAH ISOLATED FORM
+    0xfea7: 0x00ce,     #  ARABIC LETTER KHAH INITIAL FORM
+    0xfea9: 0x00cf,     #  ARABIC LETTER DAL ISOLATED FORM
+    0xfeab: 0x00d0,     #  ARABIC LETTER THAL ISOLATED FORM
+    0xfead: 0x00d1,     #  ARABIC LETTER REH ISOLATED FORM
+    0xfeaf: 0x00d2,     #  ARABIC LETTER ZAIN ISOLATED FORM
+    0xfeb1: 0x00bc,     #  ARABIC LETTER SEEN ISOLATED FORM
+    0xfeb3: 0x00d3,     #  ARABIC LETTER SEEN INITIAL FORM
+    0xfeb5: 0x00bd,     #  ARABIC LETTER SHEEN ISOLATED FORM
+    0xfeb7: 0x00d4,     #  ARABIC LETTER SHEEN INITIAL FORM
+    0xfeb9: 0x00be,     #  ARABIC LETTER SAD ISOLATED FORM
+    0xfebb: 0x00d5,     #  ARABIC LETTER SAD INITIAL FORM
+    0xfebd: 0x00eb,     #  ARABIC LETTER DAD ISOLATED FORM
+    0xfebf: 0x00d6,     #  ARABIC LETTER DAD INITIAL FORM
+    0xfec1: 0x00d7,     #  ARABIC LETTER TAH ISOLATED FORM
+    0xfec5: 0x00d8,     #  ARABIC LETTER ZAH ISOLATED FORM
+    0xfec9: 0x00df,     #  ARABIC LETTER AIN ISOLATED FORM
+    0xfeca: 0x00c5,     #  ARABIC LETTER AIN FINAL FORM
+    0xfecb: 0x00d9,     #  ARABIC LETTER AIN INITIAL FORM
+    0xfecc: 0x00ec,     #  ARABIC LETTER AIN MEDIAL FORM
+    0xfecd: 0x00ee,     #  ARABIC LETTER GHAIN ISOLATED FORM
+    0xfece: 0x00ed,     #  ARABIC LETTER GHAIN FINAL FORM
+    0xfecf: 0x00da,     #  ARABIC LETTER GHAIN INITIAL FORM
+    0xfed0: 0x00f7,     #  ARABIC LETTER GHAIN MEDIAL FORM
+    0xfed1: 0x00ba,     #  ARABIC LETTER FEH ISOLATED FORM
+    0xfed3: 0x00e1,     #  ARABIC LETTER FEH INITIAL FORM
+    0xfed5: 0x00f8,     #  ARABIC LETTER QAF ISOLATED FORM
+    0xfed7: 0x00e2,     #  ARABIC LETTER QAF INITIAL FORM
+    0xfed9: 0x00fc,     #  ARABIC LETTER KAF ISOLATED FORM
+    0xfedb: 0x00e3,     #  ARABIC LETTER KAF INITIAL FORM
+    0xfedd: 0x00fb,     #  ARABIC LETTER LAM ISOLATED FORM
+    0xfedf: 0x00e4,     #  ARABIC LETTER LAM INITIAL FORM
+    0xfee1: 0x00ef,     #  ARABIC LETTER MEEM ISOLATED FORM
+    0xfee3: 0x00e5,     #  ARABIC LETTER MEEM INITIAL FORM
+    0xfee5: 0x00f2,     #  ARABIC LETTER NOON ISOLATED FORM
+    0xfee7: 0x00e6,     #  ARABIC LETTER NOON INITIAL FORM
+    0xfee9: 0x00f3,     #  ARABIC LETTER HEH ISOLATED FORM
+    0xfeeb: 0x00e7,     #  ARABIC LETTER HEH INITIAL FORM
+    0xfeec: 0x00f4,     #  ARABIC LETTER HEH MEDIAL FORM
+    0xfeed: 0x00e8,     #  ARABIC LETTER WAW ISOLATED FORM
+    0xfeef: 0x00e9,     #  ARABIC LETTER ALEF MAKSURA ISOLATED FORM
+    0xfef0: 0x00f5,     #  ARABIC LETTER ALEF MAKSURA FINAL FORM
+    0xfef1: 0x00fd,     #  ARABIC LETTER YEH ISOLATED FORM
+    0xfef2: 0x00f6,     #  ARABIC LETTER YEH FINAL FORM
+    0xfef3: 0x00ea,     #  ARABIC LETTER YEH INITIAL FORM
+    0xfef5: 0x00f9,     #  ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE ISOLATED FORM
+    0xfef6: 0x00fa,     #  ARABIC LIGATURE LAM WITH ALEF WITH MADDA ABOVE FINAL FORM
+    0xfef7: 0x0099,     #  ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE ISOLATED FORM
+    0xfef8: 0x009a,     #  ARABIC LIGATURE LAM WITH ALEF WITH HAMZA ABOVE FINAL FORM
+    0xfefb: 0x009d,     #  ARABIC LIGATURE LAM WITH ALEF ISOLATED FORM
+    0xfefc: 0x009e,     #  ARABIC LIGATURE LAM WITH ALEF FINAL FORM
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp865.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp865.py
new file mode 100644
index 0000000000000000000000000000000000000000..6726cf3f9ed3717503f7b2935c1d939d5a00ff4a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp865.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP865.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp865',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0081: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x0082: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x0083: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x0084: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x0085: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0086: 0x00e5,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x0087: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x0088: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0089: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x008a: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x008b: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x008c: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x008d: 0x00ec,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x008e: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x008f: 0x00c5,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x0090: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0091: 0x00e6,     #  LATIN SMALL LIGATURE AE
+    0x0092: 0x00c6,     #  LATIN CAPITAL LIGATURE AE
+    0x0093: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x0094: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x0095: 0x00f2,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x0096: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x0097: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x0098: 0x00ff,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0099: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x009a: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x009b: 0x00f8,     #  LATIN SMALL LETTER O WITH STROKE
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x00d8,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x009e: 0x20a7,     #  PESETA SIGN
+    0x009f: 0x0192,     #  LATIN SMALL LETTER F WITH HOOK
+    0x00a0: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00a1: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00a2: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00a3: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00a4: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00a5: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00a6: 0x00aa,     #  FEMININE ORDINAL INDICATOR
+    0x00a7: 0x00ba,     #  MASCULINE ORDINAL INDICATOR
+    0x00a8: 0x00bf,     #  INVERTED QUESTION MARK
+    0x00a9: 0x2310,     #  REVERSED NOT SIGN
+    0x00aa: 0x00ac,     #  NOT SIGN
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x00bc,     #  VULGAR FRACTION ONE QUARTER
+    0x00ad: 0x00a1,     #  INVERTED EXCLAMATION MARK
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00a4,     #  CURRENCY SIGN
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00e1: 0x00df,     #  LATIN SMALL LETTER SHARP S
+    0x00e2: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00e3: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00e4: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00e5: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00e6: 0x00b5,     #  MICRO SIGN
+    0x00e7: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00e8: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00e9: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ea: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00eb: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00ec: 0x221e,     #  INFINITY
+    0x00ed: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00ee: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00ef: 0x2229,     #  INTERSECTION
+    0x00f0: 0x2261,     #  IDENTICAL TO
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x2265,     #  GREATER-THAN OR EQUAL TO
+    0x00f3: 0x2264,     #  LESS-THAN OR EQUAL TO
+    0x00f4: 0x2320,     #  TOP HALF INTEGRAL
+    0x00f5: 0x2321,     #  BOTTOM HALF INTEGRAL
+    0x00f6: 0x00f7,     #  DIVISION SIGN
+    0x00f7: 0x2248,     #  ALMOST EQUAL TO
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x207f,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x00fd: 0x00b2,     #  SUPERSCRIPT TWO
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\xc7'     #  0x0080 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xfc'     #  0x0081 -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xe9'     #  0x0082 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe2'     #  0x0083 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x0084 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe0'     #  0x0085 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe5'     #  0x0086 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x0087 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xea'     #  0x0088 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0089 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xe8'     #  0x008a -> LATIN SMALL LETTER E WITH GRAVE
+    '\xef'     #  0x008b -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xee'     #  0x008c -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xec'     #  0x008d -> LATIN SMALL LETTER I WITH GRAVE
+    '\xc4'     #  0x008e -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x008f -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc9'     #  0x0090 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xe6'     #  0x0091 -> LATIN SMALL LIGATURE AE
+    '\xc6'     #  0x0092 -> LATIN CAPITAL LIGATURE AE
+    '\xf4'     #  0x0093 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x0094 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf2'     #  0x0095 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xfb'     #  0x0096 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xf9'     #  0x0097 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xff'     #  0x0098 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xd6'     #  0x0099 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x009a -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xf8'     #  0x009b -> LATIN SMALL LETTER O WITH STROKE
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\xd8'     #  0x009d -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u20a7'   #  0x009e -> PESETA SIGN
+    '\u0192'   #  0x009f -> LATIN SMALL LETTER F WITH HOOK
+    '\xe1'     #  0x00a0 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xed'     #  0x00a1 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf3'     #  0x00a2 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0x00a3 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf1'     #  0x00a4 -> LATIN SMALL LETTER N WITH TILDE
+    '\xd1'     #  0x00a5 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xaa'     #  0x00a6 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0x00a7 -> MASCULINE ORDINAL INDICATOR
+    '\xbf'     #  0x00a8 -> INVERTED QUESTION MARK
+    '\u2310'   #  0x00a9 -> REVERSED NOT SIGN
+    '\xac'     #  0x00aa -> NOT SIGN
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\xbc'     #  0x00ac -> VULGAR FRACTION ONE QUARTER
+    '\xa1'     #  0x00ad -> INVERTED EXCLAMATION MARK
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xa4'     #  0x00af -> CURRENCY SIGN
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b1'   #  0x00e0 -> GREEK SMALL LETTER ALPHA
+    '\xdf'     #  0x00e1 -> LATIN SMALL LETTER SHARP S
+    '\u0393'   #  0x00e2 -> GREEK CAPITAL LETTER GAMMA
+    '\u03c0'   #  0x00e3 -> GREEK SMALL LETTER PI
+    '\u03a3'   #  0x00e4 -> GREEK CAPITAL LETTER SIGMA
+    '\u03c3'   #  0x00e5 -> GREEK SMALL LETTER SIGMA
+    '\xb5'     #  0x00e6 -> MICRO SIGN
+    '\u03c4'   #  0x00e7 -> GREEK SMALL LETTER TAU
+    '\u03a6'   #  0x00e8 -> GREEK CAPITAL LETTER PHI
+    '\u0398'   #  0x00e9 -> GREEK CAPITAL LETTER THETA
+    '\u03a9'   #  0x00ea -> GREEK CAPITAL LETTER OMEGA
+    '\u03b4'   #  0x00eb -> GREEK SMALL LETTER DELTA
+    '\u221e'   #  0x00ec -> INFINITY
+    '\u03c6'   #  0x00ed -> GREEK SMALL LETTER PHI
+    '\u03b5'   #  0x00ee -> GREEK SMALL LETTER EPSILON
+    '\u2229'   #  0x00ef -> INTERSECTION
+    '\u2261'   #  0x00f0 -> IDENTICAL TO
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u2265'   #  0x00f2 -> GREATER-THAN OR EQUAL TO
+    '\u2264'   #  0x00f3 -> LESS-THAN OR EQUAL TO
+    '\u2320'   #  0x00f4 -> TOP HALF INTEGRAL
+    '\u2321'   #  0x00f5 -> BOTTOM HALF INTEGRAL
+    '\xf7'     #  0x00f6 -> DIVISION SIGN
+    '\u2248'   #  0x00f7 -> ALMOST EQUAL TO
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u207f'   #  0x00fc -> SUPERSCRIPT LATIN SMALL LETTER N
+    '\xb2'     #  0x00fd -> SUPERSCRIPT TWO
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a1: 0x00ad,     #  INVERTED EXCLAMATION MARK
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a4: 0x00af,     #  CURRENCY SIGN
+    0x00aa: 0x00a6,     #  FEMININE ORDINAL INDICATOR
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x00aa,     #  NOT SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x00fd,     #  SUPERSCRIPT TWO
+    0x00b5: 0x00e6,     #  MICRO SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x00ba: 0x00a7,     #  MASCULINE ORDINAL INDICATOR
+    0x00bc: 0x00ac,     #  VULGAR FRACTION ONE QUARTER
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x00bf: 0x00a8,     #  INVERTED QUESTION MARK
+    0x00c4: 0x008e,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c5: 0x008f,     #  LATIN CAPITAL LETTER A WITH RING ABOVE
+    0x00c6: 0x0092,     #  LATIN CAPITAL LIGATURE AE
+    0x00c7: 0x0080,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c9: 0x0090,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00d1: 0x00a5,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d6: 0x0099,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00d8: 0x009d,     #  LATIN CAPITAL LETTER O WITH STROKE
+    0x00dc: 0x009a,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00df: 0x00e1,     #  LATIN SMALL LETTER SHARP S
+    0x00e0: 0x0085,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x00a0,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0083,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e4: 0x0084,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e5: 0x0086,     #  LATIN SMALL LETTER A WITH RING ABOVE
+    0x00e6: 0x0091,     #  LATIN SMALL LIGATURE AE
+    0x00e7: 0x0087,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008a,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x0082,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0088,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0089,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ec: 0x008d,     #  LATIN SMALL LETTER I WITH GRAVE
+    0x00ed: 0x00a1,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x008c,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x008b,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f1: 0x00a4,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f2: 0x0095,     #  LATIN SMALL LETTER O WITH GRAVE
+    0x00f3: 0x00a2,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0093,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f6: 0x0094,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x00f6,     #  DIVISION SIGN
+    0x00f8: 0x009b,     #  LATIN SMALL LETTER O WITH STROKE
+    0x00f9: 0x0097,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x00a3,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x0096,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x0081,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00ff: 0x0098,     #  LATIN SMALL LETTER Y WITH DIAERESIS
+    0x0192: 0x009f,     #  LATIN SMALL LETTER F WITH HOOK
+    0x0393: 0x00e2,     #  GREEK CAPITAL LETTER GAMMA
+    0x0398: 0x00e9,     #  GREEK CAPITAL LETTER THETA
+    0x03a3: 0x00e4,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a6: 0x00e8,     #  GREEK CAPITAL LETTER PHI
+    0x03a9: 0x00ea,     #  GREEK CAPITAL LETTER OMEGA
+    0x03b1: 0x00e0,     #  GREEK SMALL LETTER ALPHA
+    0x03b4: 0x00eb,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00ee,     #  GREEK SMALL LETTER EPSILON
+    0x03c0: 0x00e3,     #  GREEK SMALL LETTER PI
+    0x03c3: 0x00e5,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00e7,     #  GREEK SMALL LETTER TAU
+    0x03c6: 0x00ed,     #  GREEK SMALL LETTER PHI
+    0x207f: 0x00fc,     #  SUPERSCRIPT LATIN SMALL LETTER N
+    0x20a7: 0x009e,     #  PESETA SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x221e: 0x00ec,     #  INFINITY
+    0x2229: 0x00ef,     #  INTERSECTION
+    0x2248: 0x00f7,     #  ALMOST EQUAL TO
+    0x2261: 0x00f0,     #  IDENTICAL TO
+    0x2264: 0x00f3,     #  LESS-THAN OR EQUAL TO
+    0x2265: 0x00f2,     #  GREATER-THAN OR EQUAL TO
+    0x2310: 0x00a9,     #  REVERSED NOT SIGN
+    0x2320: 0x00f4,     #  TOP HALF INTEGRAL
+    0x2321: 0x00f5,     #  BOTTOM HALF INTEGRAL
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp866.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp866.py
new file mode 100644
index 0000000000000000000000000000000000000000..bec7ae39fbac9d9310a1dbd67c07a6c7017f785e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp866.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP866.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp866',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x0410,     #  CYRILLIC CAPITAL LETTER A
+    0x0081: 0x0411,     #  CYRILLIC CAPITAL LETTER BE
+    0x0082: 0x0412,     #  CYRILLIC CAPITAL LETTER VE
+    0x0083: 0x0413,     #  CYRILLIC CAPITAL LETTER GHE
+    0x0084: 0x0414,     #  CYRILLIC CAPITAL LETTER DE
+    0x0085: 0x0415,     #  CYRILLIC CAPITAL LETTER IE
+    0x0086: 0x0416,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x0087: 0x0417,     #  CYRILLIC CAPITAL LETTER ZE
+    0x0088: 0x0418,     #  CYRILLIC CAPITAL LETTER I
+    0x0089: 0x0419,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x008a: 0x041a,     #  CYRILLIC CAPITAL LETTER KA
+    0x008b: 0x041b,     #  CYRILLIC CAPITAL LETTER EL
+    0x008c: 0x041c,     #  CYRILLIC CAPITAL LETTER EM
+    0x008d: 0x041d,     #  CYRILLIC CAPITAL LETTER EN
+    0x008e: 0x041e,     #  CYRILLIC CAPITAL LETTER O
+    0x008f: 0x041f,     #  CYRILLIC CAPITAL LETTER PE
+    0x0090: 0x0420,     #  CYRILLIC CAPITAL LETTER ER
+    0x0091: 0x0421,     #  CYRILLIC CAPITAL LETTER ES
+    0x0092: 0x0422,     #  CYRILLIC CAPITAL LETTER TE
+    0x0093: 0x0423,     #  CYRILLIC CAPITAL LETTER U
+    0x0094: 0x0424,     #  CYRILLIC CAPITAL LETTER EF
+    0x0095: 0x0425,     #  CYRILLIC CAPITAL LETTER HA
+    0x0096: 0x0426,     #  CYRILLIC CAPITAL LETTER TSE
+    0x0097: 0x0427,     #  CYRILLIC CAPITAL LETTER CHE
+    0x0098: 0x0428,     #  CYRILLIC CAPITAL LETTER SHA
+    0x0099: 0x0429,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x009a: 0x042a,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x009b: 0x042b,     #  CYRILLIC CAPITAL LETTER YERU
+    0x009c: 0x042c,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x009d: 0x042d,     #  CYRILLIC CAPITAL LETTER E
+    0x009e: 0x042e,     #  CYRILLIC CAPITAL LETTER YU
+    0x009f: 0x042f,     #  CYRILLIC CAPITAL LETTER YA
+    0x00a0: 0x0430,     #  CYRILLIC SMALL LETTER A
+    0x00a1: 0x0431,     #  CYRILLIC SMALL LETTER BE
+    0x00a2: 0x0432,     #  CYRILLIC SMALL LETTER VE
+    0x00a3: 0x0433,     #  CYRILLIC SMALL LETTER GHE
+    0x00a4: 0x0434,     #  CYRILLIC SMALL LETTER DE
+    0x00a5: 0x0435,     #  CYRILLIC SMALL LETTER IE
+    0x00a6: 0x0436,     #  CYRILLIC SMALL LETTER ZHE
+    0x00a7: 0x0437,     #  CYRILLIC SMALL LETTER ZE
+    0x00a8: 0x0438,     #  CYRILLIC SMALL LETTER I
+    0x00a9: 0x0439,     #  CYRILLIC SMALL LETTER SHORT I
+    0x00aa: 0x043a,     #  CYRILLIC SMALL LETTER KA
+    0x00ab: 0x043b,     #  CYRILLIC SMALL LETTER EL
+    0x00ac: 0x043c,     #  CYRILLIC SMALL LETTER EM
+    0x00ad: 0x043d,     #  CYRILLIC SMALL LETTER EN
+    0x00ae: 0x043e,     #  CYRILLIC SMALL LETTER O
+    0x00af: 0x043f,     #  CYRILLIC SMALL LETTER PE
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x2561,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x00b6: 0x2562,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x00b7: 0x2556,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x00b8: 0x2555,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x255c,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x00be: 0x255b,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x255e,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x00c7: 0x255f,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x2567,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x00d0: 0x2568,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x00d1: 0x2564,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x00d2: 0x2565,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x00d3: 0x2559,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x00d4: 0x2558,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x00d5: 0x2552,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x00d6: 0x2553,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x00d7: 0x256b,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x00d8: 0x256a,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x258c,     #  LEFT HALF BLOCK
+    0x00de: 0x2590,     #  RIGHT HALF BLOCK
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x0440,     #  CYRILLIC SMALL LETTER ER
+    0x00e1: 0x0441,     #  CYRILLIC SMALL LETTER ES
+    0x00e2: 0x0442,     #  CYRILLIC SMALL LETTER TE
+    0x00e3: 0x0443,     #  CYRILLIC SMALL LETTER U
+    0x00e4: 0x0444,     #  CYRILLIC SMALL LETTER EF
+    0x00e5: 0x0445,     #  CYRILLIC SMALL LETTER HA
+    0x00e6: 0x0446,     #  CYRILLIC SMALL LETTER TSE
+    0x00e7: 0x0447,     #  CYRILLIC SMALL LETTER CHE
+    0x00e8: 0x0448,     #  CYRILLIC SMALL LETTER SHA
+    0x00e9: 0x0449,     #  CYRILLIC SMALL LETTER SHCHA
+    0x00ea: 0x044a,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x00eb: 0x044b,     #  CYRILLIC SMALL LETTER YERU
+    0x00ec: 0x044c,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x00ed: 0x044d,     #  CYRILLIC SMALL LETTER E
+    0x00ee: 0x044e,     #  CYRILLIC SMALL LETTER YU
+    0x00ef: 0x044f,     #  CYRILLIC SMALL LETTER YA
+    0x00f0: 0x0401,     #  CYRILLIC CAPITAL LETTER IO
+    0x00f1: 0x0451,     #  CYRILLIC SMALL LETTER IO
+    0x00f2: 0x0404,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x00f3: 0x0454,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x00f4: 0x0407,     #  CYRILLIC CAPITAL LETTER YI
+    0x00f5: 0x0457,     #  CYRILLIC SMALL LETTER YI
+    0x00f6: 0x040e,     #  CYRILLIC CAPITAL LETTER SHORT U
+    0x00f7: 0x045e,     #  CYRILLIC SMALL LETTER SHORT U
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x2219,     #  BULLET OPERATOR
+    0x00fa: 0x00b7,     #  MIDDLE DOT
+    0x00fb: 0x221a,     #  SQUARE ROOT
+    0x00fc: 0x2116,     #  NUMERO SIGN
+    0x00fd: 0x00a4,     #  CURRENCY SIGN
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\u0410'   #  0x0080 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0x0081 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0x0082 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0x0083 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0x0084 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0x0085 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0x0086 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0x0087 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0x0088 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0x0089 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0x008a -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0x008b -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0x008c -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0x008d -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0x008e -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0x008f -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0x0090 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0x0091 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0x0092 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0x0093 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0x0094 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0x0095 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0x0096 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0x0097 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0x0098 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0x0099 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0x009a -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0x009b -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0x009c -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0x009d -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0x009e -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0x009f -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'   #  0x00a0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0x00a1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0x00a2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0x00a3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0x00a4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0x00a5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0x00a6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0x00a7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0x00a8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0x00a9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0x00aa -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0x00ab -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0x00ac -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0x00ad -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0x00ae -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0x00af -> CYRILLIC SMALL LETTER PE
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u2561'   #  0x00b5 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u2562'   #  0x00b6 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2556'   #  0x00b7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2555'   #  0x00b8 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255c'   #  0x00bd -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255b'   #  0x00be -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u255e'   #  0x00c6 -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0x00c7 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u2567'   #  0x00cf -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0x00d0 -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2564'   #  0x00d1 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0x00d2 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2559'   #  0x00d3 -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u2558'   #  0x00d4 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2552'   #  0x00d5 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u2553'   #  0x00d6 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u256b'   #  0x00d7 -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256a'   #  0x00d8 -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u258c'   #  0x00dd -> LEFT HALF BLOCK
+    '\u2590'   #  0x00de -> RIGHT HALF BLOCK
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u0440'   #  0x00e0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0x00e1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0x00e2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0x00e3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0x00e4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0x00e5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0x00e6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0x00e7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0x00e8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0x00e9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0x00ea -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0x00eb -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0x00ec -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0x00ed -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0x00ee -> CYRILLIC SMALL LETTER YU
+    '\u044f'   #  0x00ef -> CYRILLIC SMALL LETTER YA
+    '\u0401'   #  0x00f0 -> CYRILLIC CAPITAL LETTER IO
+    '\u0451'   #  0x00f1 -> CYRILLIC SMALL LETTER IO
+    '\u0404'   #  0x00f2 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u0454'   #  0x00f3 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u0407'   #  0x00f4 -> CYRILLIC CAPITAL LETTER YI
+    '\u0457'   #  0x00f5 -> CYRILLIC SMALL LETTER YI
+    '\u040e'   #  0x00f6 -> CYRILLIC CAPITAL LETTER SHORT U
+    '\u045e'   #  0x00f7 -> CYRILLIC SMALL LETTER SHORT U
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\u2219'   #  0x00f9 -> BULLET OPERATOR
+    '\xb7'     #  0x00fa -> MIDDLE DOT
+    '\u221a'   #  0x00fb -> SQUARE ROOT
+    '\u2116'   #  0x00fc -> NUMERO SIGN
+    '\xa4'     #  0x00fd -> CURRENCY SIGN
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a4: 0x00fd,     #  CURRENCY SIGN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b7: 0x00fa,     #  MIDDLE DOT
+    0x0401: 0x00f0,     #  CYRILLIC CAPITAL LETTER IO
+    0x0404: 0x00f2,     #  CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    0x0407: 0x00f4,     #  CYRILLIC CAPITAL LETTER YI
+    0x040e: 0x00f6,     #  CYRILLIC CAPITAL LETTER SHORT U
+    0x0410: 0x0080,     #  CYRILLIC CAPITAL LETTER A
+    0x0411: 0x0081,     #  CYRILLIC CAPITAL LETTER BE
+    0x0412: 0x0082,     #  CYRILLIC CAPITAL LETTER VE
+    0x0413: 0x0083,     #  CYRILLIC CAPITAL LETTER GHE
+    0x0414: 0x0084,     #  CYRILLIC CAPITAL LETTER DE
+    0x0415: 0x0085,     #  CYRILLIC CAPITAL LETTER IE
+    0x0416: 0x0086,     #  CYRILLIC CAPITAL LETTER ZHE
+    0x0417: 0x0087,     #  CYRILLIC CAPITAL LETTER ZE
+    0x0418: 0x0088,     #  CYRILLIC CAPITAL LETTER I
+    0x0419: 0x0089,     #  CYRILLIC CAPITAL LETTER SHORT I
+    0x041a: 0x008a,     #  CYRILLIC CAPITAL LETTER KA
+    0x041b: 0x008b,     #  CYRILLIC CAPITAL LETTER EL
+    0x041c: 0x008c,     #  CYRILLIC CAPITAL LETTER EM
+    0x041d: 0x008d,     #  CYRILLIC CAPITAL LETTER EN
+    0x041e: 0x008e,     #  CYRILLIC CAPITAL LETTER O
+    0x041f: 0x008f,     #  CYRILLIC CAPITAL LETTER PE
+    0x0420: 0x0090,     #  CYRILLIC CAPITAL LETTER ER
+    0x0421: 0x0091,     #  CYRILLIC CAPITAL LETTER ES
+    0x0422: 0x0092,     #  CYRILLIC CAPITAL LETTER TE
+    0x0423: 0x0093,     #  CYRILLIC CAPITAL LETTER U
+    0x0424: 0x0094,     #  CYRILLIC CAPITAL LETTER EF
+    0x0425: 0x0095,     #  CYRILLIC CAPITAL LETTER HA
+    0x0426: 0x0096,     #  CYRILLIC CAPITAL LETTER TSE
+    0x0427: 0x0097,     #  CYRILLIC CAPITAL LETTER CHE
+    0x0428: 0x0098,     #  CYRILLIC CAPITAL LETTER SHA
+    0x0429: 0x0099,     #  CYRILLIC CAPITAL LETTER SHCHA
+    0x042a: 0x009a,     #  CYRILLIC CAPITAL LETTER HARD SIGN
+    0x042b: 0x009b,     #  CYRILLIC CAPITAL LETTER YERU
+    0x042c: 0x009c,     #  CYRILLIC CAPITAL LETTER SOFT SIGN
+    0x042d: 0x009d,     #  CYRILLIC CAPITAL LETTER E
+    0x042e: 0x009e,     #  CYRILLIC CAPITAL LETTER YU
+    0x042f: 0x009f,     #  CYRILLIC CAPITAL LETTER YA
+    0x0430: 0x00a0,     #  CYRILLIC SMALL LETTER A
+    0x0431: 0x00a1,     #  CYRILLIC SMALL LETTER BE
+    0x0432: 0x00a2,     #  CYRILLIC SMALL LETTER VE
+    0x0433: 0x00a3,     #  CYRILLIC SMALL LETTER GHE
+    0x0434: 0x00a4,     #  CYRILLIC SMALL LETTER DE
+    0x0435: 0x00a5,     #  CYRILLIC SMALL LETTER IE
+    0x0436: 0x00a6,     #  CYRILLIC SMALL LETTER ZHE
+    0x0437: 0x00a7,     #  CYRILLIC SMALL LETTER ZE
+    0x0438: 0x00a8,     #  CYRILLIC SMALL LETTER I
+    0x0439: 0x00a9,     #  CYRILLIC SMALL LETTER SHORT I
+    0x043a: 0x00aa,     #  CYRILLIC SMALL LETTER KA
+    0x043b: 0x00ab,     #  CYRILLIC SMALL LETTER EL
+    0x043c: 0x00ac,     #  CYRILLIC SMALL LETTER EM
+    0x043d: 0x00ad,     #  CYRILLIC SMALL LETTER EN
+    0x043e: 0x00ae,     #  CYRILLIC SMALL LETTER O
+    0x043f: 0x00af,     #  CYRILLIC SMALL LETTER PE
+    0x0440: 0x00e0,     #  CYRILLIC SMALL LETTER ER
+    0x0441: 0x00e1,     #  CYRILLIC SMALL LETTER ES
+    0x0442: 0x00e2,     #  CYRILLIC SMALL LETTER TE
+    0x0443: 0x00e3,     #  CYRILLIC SMALL LETTER U
+    0x0444: 0x00e4,     #  CYRILLIC SMALL LETTER EF
+    0x0445: 0x00e5,     #  CYRILLIC SMALL LETTER HA
+    0x0446: 0x00e6,     #  CYRILLIC SMALL LETTER TSE
+    0x0447: 0x00e7,     #  CYRILLIC SMALL LETTER CHE
+    0x0448: 0x00e8,     #  CYRILLIC SMALL LETTER SHA
+    0x0449: 0x00e9,     #  CYRILLIC SMALL LETTER SHCHA
+    0x044a: 0x00ea,     #  CYRILLIC SMALL LETTER HARD SIGN
+    0x044b: 0x00eb,     #  CYRILLIC SMALL LETTER YERU
+    0x044c: 0x00ec,     #  CYRILLIC SMALL LETTER SOFT SIGN
+    0x044d: 0x00ed,     #  CYRILLIC SMALL LETTER E
+    0x044e: 0x00ee,     #  CYRILLIC SMALL LETTER YU
+    0x044f: 0x00ef,     #  CYRILLIC SMALL LETTER YA
+    0x0451: 0x00f1,     #  CYRILLIC SMALL LETTER IO
+    0x0454: 0x00f3,     #  CYRILLIC SMALL LETTER UKRAINIAN IE
+    0x0457: 0x00f5,     #  CYRILLIC SMALL LETTER YI
+    0x045e: 0x00f7,     #  CYRILLIC SMALL LETTER SHORT U
+    0x2116: 0x00fc,     #  NUMERO SIGN
+    0x2219: 0x00f9,     #  BULLET OPERATOR
+    0x221a: 0x00fb,     #  SQUARE ROOT
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2552: 0x00d5,     #  BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    0x2553: 0x00d6,     #  BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2555: 0x00b8,     #  BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    0x2556: 0x00b7,     #  BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x2558: 0x00d4,     #  BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    0x2559: 0x00d3,     #  BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255b: 0x00be,     #  BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    0x255c: 0x00bd,     #  BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x255e: 0x00c6,     #  BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    0x255f: 0x00c7,     #  BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2561: 0x00b5,     #  BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    0x2562: 0x00b6,     #  BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2564: 0x00d1,     #  BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    0x2565: 0x00d2,     #  BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2567: 0x00cf,     #  BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    0x2568: 0x00d0,     #  BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256a: 0x00d8,     #  BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    0x256b: 0x00d7,     #  BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x258c: 0x00dd,     #  LEFT HALF BLOCK
+    0x2590: 0x00de,     #  RIGHT HALF BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp869.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp869.py
new file mode 100644
index 0000000000000000000000000000000000000000..8d8a29b175c18809229748bed747ef44b65c6a67
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp869.py
@@ -0,0 +1,689 @@
+""" Python Character Mapping Codec generated from 'VENDORS/MICSFT/PC/CP869.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp869',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: None,       #  UNDEFINED
+    0x0081: None,       #  UNDEFINED
+    0x0082: None,       #  UNDEFINED
+    0x0083: None,       #  UNDEFINED
+    0x0084: None,       #  UNDEFINED
+    0x0085: None,       #  UNDEFINED
+    0x0086: 0x0386,     #  GREEK CAPITAL LETTER ALPHA WITH TONOS
+    0x0087: None,       #  UNDEFINED
+    0x0088: 0x00b7,     #  MIDDLE DOT
+    0x0089: 0x00ac,     #  NOT SIGN
+    0x008a: 0x00a6,     #  BROKEN BAR
+    0x008b: 0x2018,     #  LEFT SINGLE QUOTATION MARK
+    0x008c: 0x2019,     #  RIGHT SINGLE QUOTATION MARK
+    0x008d: 0x0388,     #  GREEK CAPITAL LETTER EPSILON WITH TONOS
+    0x008e: 0x2015,     #  HORIZONTAL BAR
+    0x008f: 0x0389,     #  GREEK CAPITAL LETTER ETA WITH TONOS
+    0x0090: 0x038a,     #  GREEK CAPITAL LETTER IOTA WITH TONOS
+    0x0091: 0x03aa,     #  GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    0x0092: 0x038c,     #  GREEK CAPITAL LETTER OMICRON WITH TONOS
+    0x0093: None,       #  UNDEFINED
+    0x0094: None,       #  UNDEFINED
+    0x0095: 0x038e,     #  GREEK CAPITAL LETTER UPSILON WITH TONOS
+    0x0096: 0x03ab,     #  GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    0x0097: 0x00a9,     #  COPYRIGHT SIGN
+    0x0098: 0x038f,     #  GREEK CAPITAL LETTER OMEGA WITH TONOS
+    0x0099: 0x00b2,     #  SUPERSCRIPT TWO
+    0x009a: 0x00b3,     #  SUPERSCRIPT THREE
+    0x009b: 0x03ac,     #  GREEK SMALL LETTER ALPHA WITH TONOS
+    0x009c: 0x00a3,     #  POUND SIGN
+    0x009d: 0x03ad,     #  GREEK SMALL LETTER EPSILON WITH TONOS
+    0x009e: 0x03ae,     #  GREEK SMALL LETTER ETA WITH TONOS
+    0x009f: 0x03af,     #  GREEK SMALL LETTER IOTA WITH TONOS
+    0x00a0: 0x03ca,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    0x00a1: 0x0390,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    0x00a2: 0x03cc,     #  GREEK SMALL LETTER OMICRON WITH TONOS
+    0x00a3: 0x03cd,     #  GREEK SMALL LETTER UPSILON WITH TONOS
+    0x00a4: 0x0391,     #  GREEK CAPITAL LETTER ALPHA
+    0x00a5: 0x0392,     #  GREEK CAPITAL LETTER BETA
+    0x00a6: 0x0393,     #  GREEK CAPITAL LETTER GAMMA
+    0x00a7: 0x0394,     #  GREEK CAPITAL LETTER DELTA
+    0x00a8: 0x0395,     #  GREEK CAPITAL LETTER EPSILON
+    0x00a9: 0x0396,     #  GREEK CAPITAL LETTER ZETA
+    0x00aa: 0x0397,     #  GREEK CAPITAL LETTER ETA
+    0x00ab: 0x00bd,     #  VULGAR FRACTION ONE HALF
+    0x00ac: 0x0398,     #  GREEK CAPITAL LETTER THETA
+    0x00ad: 0x0399,     #  GREEK CAPITAL LETTER IOTA
+    0x00ae: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00af: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00b0: 0x2591,     #  LIGHT SHADE
+    0x00b1: 0x2592,     #  MEDIUM SHADE
+    0x00b2: 0x2593,     #  DARK SHADE
+    0x00b3: 0x2502,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x00b4: 0x2524,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x00b5: 0x039a,     #  GREEK CAPITAL LETTER KAPPA
+    0x00b6: 0x039b,     #  GREEK CAPITAL LETTER LAMDA
+    0x00b7: 0x039c,     #  GREEK CAPITAL LETTER MU
+    0x00b8: 0x039d,     #  GREEK CAPITAL LETTER NU
+    0x00b9: 0x2563,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x00ba: 0x2551,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x00bb: 0x2557,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x00bc: 0x255d,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x00bd: 0x039e,     #  GREEK CAPITAL LETTER XI
+    0x00be: 0x039f,     #  GREEK CAPITAL LETTER OMICRON
+    0x00bf: 0x2510,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x00c0: 0x2514,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x00c1: 0x2534,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x00c2: 0x252c,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x00c3: 0x251c,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x00c4: 0x2500,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x00c5: 0x253c,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x00c6: 0x03a0,     #  GREEK CAPITAL LETTER PI
+    0x00c7: 0x03a1,     #  GREEK CAPITAL LETTER RHO
+    0x00c8: 0x255a,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x00c9: 0x2554,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x00ca: 0x2569,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x00cb: 0x2566,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x00cc: 0x2560,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x00cd: 0x2550,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x00ce: 0x256c,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x00cf: 0x03a3,     #  GREEK CAPITAL LETTER SIGMA
+    0x00d0: 0x03a4,     #  GREEK CAPITAL LETTER TAU
+    0x00d1: 0x03a5,     #  GREEK CAPITAL LETTER UPSILON
+    0x00d2: 0x03a6,     #  GREEK CAPITAL LETTER PHI
+    0x00d3: 0x03a7,     #  GREEK CAPITAL LETTER CHI
+    0x00d4: 0x03a8,     #  GREEK CAPITAL LETTER PSI
+    0x00d5: 0x03a9,     #  GREEK CAPITAL LETTER OMEGA
+    0x00d6: 0x03b1,     #  GREEK SMALL LETTER ALPHA
+    0x00d7: 0x03b2,     #  GREEK SMALL LETTER BETA
+    0x00d8: 0x03b3,     #  GREEK SMALL LETTER GAMMA
+    0x00d9: 0x2518,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x00da: 0x250c,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x00db: 0x2588,     #  FULL BLOCK
+    0x00dc: 0x2584,     #  LOWER HALF BLOCK
+    0x00dd: 0x03b4,     #  GREEK SMALL LETTER DELTA
+    0x00de: 0x03b5,     #  GREEK SMALL LETTER EPSILON
+    0x00df: 0x2580,     #  UPPER HALF BLOCK
+    0x00e0: 0x03b6,     #  GREEK SMALL LETTER ZETA
+    0x00e1: 0x03b7,     #  GREEK SMALL LETTER ETA
+    0x00e2: 0x03b8,     #  GREEK SMALL LETTER THETA
+    0x00e3: 0x03b9,     #  GREEK SMALL LETTER IOTA
+    0x00e4: 0x03ba,     #  GREEK SMALL LETTER KAPPA
+    0x00e5: 0x03bb,     #  GREEK SMALL LETTER LAMDA
+    0x00e6: 0x03bc,     #  GREEK SMALL LETTER MU
+    0x00e7: 0x03bd,     #  GREEK SMALL LETTER NU
+    0x00e8: 0x03be,     #  GREEK SMALL LETTER XI
+    0x00e9: 0x03bf,     #  GREEK SMALL LETTER OMICRON
+    0x00ea: 0x03c0,     #  GREEK SMALL LETTER PI
+    0x00eb: 0x03c1,     #  GREEK SMALL LETTER RHO
+    0x00ec: 0x03c3,     #  GREEK SMALL LETTER SIGMA
+    0x00ed: 0x03c2,     #  GREEK SMALL LETTER FINAL SIGMA
+    0x00ee: 0x03c4,     #  GREEK SMALL LETTER TAU
+    0x00ef: 0x0384,     #  GREEK TONOS
+    0x00f0: 0x00ad,     #  SOFT HYPHEN
+    0x00f1: 0x00b1,     #  PLUS-MINUS SIGN
+    0x00f2: 0x03c5,     #  GREEK SMALL LETTER UPSILON
+    0x00f3: 0x03c6,     #  GREEK SMALL LETTER PHI
+    0x00f4: 0x03c7,     #  GREEK SMALL LETTER CHI
+    0x00f5: 0x00a7,     #  SECTION SIGN
+    0x00f6: 0x03c8,     #  GREEK SMALL LETTER PSI
+    0x00f7: 0x0385,     #  GREEK DIALYTIKA TONOS
+    0x00f8: 0x00b0,     #  DEGREE SIGN
+    0x00f9: 0x00a8,     #  DIAERESIS
+    0x00fa: 0x03c9,     #  GREEK SMALL LETTER OMEGA
+    0x00fb: 0x03cb,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    0x00fc: 0x03b0,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    0x00fd: 0x03ce,     #  GREEK SMALL LETTER OMEGA WITH TONOS
+    0x00fe: 0x25a0,     #  BLACK SQUARE
+    0x00ff: 0x00a0,     #  NO-BREAK SPACE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> NULL
+    '\x01'     #  0x0001 -> START OF HEADING
+    '\x02'     #  0x0002 -> START OF TEXT
+    '\x03'     #  0x0003 -> END OF TEXT
+    '\x04'     #  0x0004 -> END OF TRANSMISSION
+    '\x05'     #  0x0005 -> ENQUIRY
+    '\x06'     #  0x0006 -> ACKNOWLEDGE
+    '\x07'     #  0x0007 -> BELL
+    '\x08'     #  0x0008 -> BACKSPACE
+    '\t'       #  0x0009 -> HORIZONTAL TABULATION
+    '\n'       #  0x000a -> LINE FEED
+    '\x0b'     #  0x000b -> VERTICAL TABULATION
+    '\x0c'     #  0x000c -> FORM FEED
+    '\r'       #  0x000d -> CARRIAGE RETURN
+    '\x0e'     #  0x000e -> SHIFT OUT
+    '\x0f'     #  0x000f -> SHIFT IN
+    '\x10'     #  0x0010 -> DATA LINK ESCAPE
+    '\x11'     #  0x0011 -> DEVICE CONTROL ONE
+    '\x12'     #  0x0012 -> DEVICE CONTROL TWO
+    '\x13'     #  0x0013 -> DEVICE CONTROL THREE
+    '\x14'     #  0x0014 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x0015 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x0016 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x0017 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x0018 -> CANCEL
+    '\x19'     #  0x0019 -> END OF MEDIUM
+    '\x1a'     #  0x001a -> SUBSTITUTE
+    '\x1b'     #  0x001b -> ESCAPE
+    '\x1c'     #  0x001c -> FILE SEPARATOR
+    '\x1d'     #  0x001d -> GROUP SEPARATOR
+    '\x1e'     #  0x001e -> RECORD SEPARATOR
+    '\x1f'     #  0x001f -> UNIT SEPARATOR
+    ' '        #  0x0020 -> SPACE
+    '!'        #  0x0021 -> EXCLAMATION MARK
+    '"'        #  0x0022 -> QUOTATION MARK
+    '#'        #  0x0023 -> NUMBER SIGN
+    '$'        #  0x0024 -> DOLLAR SIGN
+    '%'        #  0x0025 -> PERCENT SIGN
+    '&'        #  0x0026 -> AMPERSAND
+    "'"        #  0x0027 -> APOSTROPHE
+    '('        #  0x0028 -> LEFT PARENTHESIS
+    ')'        #  0x0029 -> RIGHT PARENTHESIS
+    '*'        #  0x002a -> ASTERISK
+    '+'        #  0x002b -> PLUS SIGN
+    ','        #  0x002c -> COMMA
+    '-'        #  0x002d -> HYPHEN-MINUS
+    '.'        #  0x002e -> FULL STOP
+    '/'        #  0x002f -> SOLIDUS
+    '0'        #  0x0030 -> DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE
+    ':'        #  0x003a -> COLON
+    ';'        #  0x003b -> SEMICOLON
+    '<'        #  0x003c -> LESS-THAN SIGN
+    '='        #  0x003d -> EQUALS SIGN
+    '>'        #  0x003e -> GREATER-THAN SIGN
+    '?'        #  0x003f -> QUESTION MARK
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET
+    '\\'       #  0x005c -> REVERSE SOLIDUS
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT
+    '_'        #  0x005f -> LOW LINE
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET
+    '|'        #  0x007c -> VERTICAL LINE
+    '}'        #  0x007d -> RIGHT CURLY BRACKET
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> DELETE
+    '\ufffe'   #  0x0080 -> UNDEFINED
+    '\ufffe'   #  0x0081 -> UNDEFINED
+    '\ufffe'   #  0x0082 -> UNDEFINED
+    '\ufffe'   #  0x0083 -> UNDEFINED
+    '\ufffe'   #  0x0084 -> UNDEFINED
+    '\ufffe'   #  0x0085 -> UNDEFINED
+    '\u0386'   #  0x0086 -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\ufffe'   #  0x0087 -> UNDEFINED
+    '\xb7'     #  0x0088 -> MIDDLE DOT
+    '\xac'     #  0x0089 -> NOT SIGN
+    '\xa6'     #  0x008a -> BROKEN BAR
+    '\u2018'   #  0x008b -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x008c -> RIGHT SINGLE QUOTATION MARK
+    '\u0388'   #  0x008d -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u2015'   #  0x008e -> HORIZONTAL BAR
+    '\u0389'   #  0x008f -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\u038a'   #  0x0090 -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\u03aa'   #  0x0091 -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\u038c'   #  0x0092 -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\ufffe'   #  0x0093 -> UNDEFINED
+    '\ufffe'   #  0x0094 -> UNDEFINED
+    '\u038e'   #  0x0095 -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u03ab'   #  0x0096 -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '\xa9'     #  0x0097 -> COPYRIGHT SIGN
+    '\u038f'   #  0x0098 -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '\xb2'     #  0x0099 -> SUPERSCRIPT TWO
+    '\xb3'     #  0x009a -> SUPERSCRIPT THREE
+    '\u03ac'   #  0x009b -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\xa3'     #  0x009c -> POUND SIGN
+    '\u03ad'   #  0x009d -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0x009e -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03af'   #  0x009f -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03ca'   #  0x00a0 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u0390'   #  0x00a1 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    '\u03cc'   #  0x00a2 -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u03cd'   #  0x00a3 -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u0391'   #  0x00a4 -> GREEK CAPITAL LETTER ALPHA
+    '\u0392'   #  0x00a5 -> GREEK CAPITAL LETTER BETA
+    '\u0393'   #  0x00a6 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0x00a7 -> GREEK CAPITAL LETTER DELTA
+    '\u0395'   #  0x00a8 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0x00a9 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0x00aa -> GREEK CAPITAL LETTER ETA
+    '\xbd'     #  0x00ab -> VULGAR FRACTION ONE HALF
+    '\u0398'   #  0x00ac -> GREEK CAPITAL LETTER THETA
+    '\u0399'   #  0x00ad -> GREEK CAPITAL LETTER IOTA
+    '\xab'     #  0x00ae -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0x00af -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2591'   #  0x00b0 -> LIGHT SHADE
+    '\u2592'   #  0x00b1 -> MEDIUM SHADE
+    '\u2593'   #  0x00b2 -> DARK SHADE
+    '\u2502'   #  0x00b3 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u2524'   #  0x00b4 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u039a'   #  0x00b5 -> GREEK CAPITAL LETTER KAPPA
+    '\u039b'   #  0x00b6 -> GREEK CAPITAL LETTER LAMDA
+    '\u039c'   #  0x00b7 -> GREEK CAPITAL LETTER MU
+    '\u039d'   #  0x00b8 -> GREEK CAPITAL LETTER NU
+    '\u2563'   #  0x00b9 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2551'   #  0x00ba -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2557'   #  0x00bb -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u255d'   #  0x00bc -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u039e'   #  0x00bd -> GREEK CAPITAL LETTER XI
+    '\u039f'   #  0x00be -> GREEK CAPITAL LETTER OMICRON
+    '\u2510'   #  0x00bf -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x00c0 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2534'   #  0x00c1 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u252c'   #  0x00c2 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u251c'   #  0x00c3 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2500'   #  0x00c4 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u253c'   #  0x00c5 -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u03a0'   #  0x00c6 -> GREEK CAPITAL LETTER PI
+    '\u03a1'   #  0x00c7 -> GREEK CAPITAL LETTER RHO
+    '\u255a'   #  0x00c8 -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u2554'   #  0x00c9 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2569'   #  0x00ca -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u2566'   #  0x00cb -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2560'   #  0x00cc -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2550'   #  0x00cd -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u256c'   #  0x00ce -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\u03a3'   #  0x00cf -> GREEK CAPITAL LETTER SIGMA
+    '\u03a4'   #  0x00d0 -> GREEK CAPITAL LETTER TAU
+    '\u03a5'   #  0x00d1 -> GREEK CAPITAL LETTER UPSILON
+    '\u03a6'   #  0x00d2 -> GREEK CAPITAL LETTER PHI
+    '\u03a7'   #  0x00d3 -> GREEK CAPITAL LETTER CHI
+    '\u03a8'   #  0x00d4 -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0x00d5 -> GREEK CAPITAL LETTER OMEGA
+    '\u03b1'   #  0x00d6 -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0x00d7 -> GREEK SMALL LETTER BETA
+    '\u03b3'   #  0x00d8 -> GREEK SMALL LETTER GAMMA
+    '\u2518'   #  0x00d9 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u250c'   #  0x00da -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2588'   #  0x00db -> FULL BLOCK
+    '\u2584'   #  0x00dc -> LOWER HALF BLOCK
+    '\u03b4'   #  0x00dd -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0x00de -> GREEK SMALL LETTER EPSILON
+    '\u2580'   #  0x00df -> UPPER HALF BLOCK
+    '\u03b6'   #  0x00e0 -> GREEK SMALL LETTER ZETA
+    '\u03b7'   #  0x00e1 -> GREEK SMALL LETTER ETA
+    '\u03b8'   #  0x00e2 -> GREEK SMALL LETTER THETA
+    '\u03b9'   #  0x00e3 -> GREEK SMALL LETTER IOTA
+    '\u03ba'   #  0x00e4 -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0x00e5 -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0x00e6 -> GREEK SMALL LETTER MU
+    '\u03bd'   #  0x00e7 -> GREEK SMALL LETTER NU
+    '\u03be'   #  0x00e8 -> GREEK SMALL LETTER XI
+    '\u03bf'   #  0x00e9 -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0x00ea -> GREEK SMALL LETTER PI
+    '\u03c1'   #  0x00eb -> GREEK SMALL LETTER RHO
+    '\u03c3'   #  0x00ec -> GREEK SMALL LETTER SIGMA
+    '\u03c2'   #  0x00ed -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c4'   #  0x00ee -> GREEK SMALL LETTER TAU
+    '\u0384'   #  0x00ef -> GREEK TONOS
+    '\xad'     #  0x00f0 -> SOFT HYPHEN
+    '\xb1'     #  0x00f1 -> PLUS-MINUS SIGN
+    '\u03c5'   #  0x00f2 -> GREEK SMALL LETTER UPSILON
+    '\u03c6'   #  0x00f3 -> GREEK SMALL LETTER PHI
+    '\u03c7'   #  0x00f4 -> GREEK SMALL LETTER CHI
+    '\xa7'     #  0x00f5 -> SECTION SIGN
+    '\u03c8'   #  0x00f6 -> GREEK SMALL LETTER PSI
+    '\u0385'   #  0x00f7 -> GREEK DIALYTIKA TONOS
+    '\xb0'     #  0x00f8 -> DEGREE SIGN
+    '\xa8'     #  0x00f9 -> DIAERESIS
+    '\u03c9'   #  0x00fa -> GREEK SMALL LETTER OMEGA
+    '\u03cb'   #  0x00fb -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u03b0'   #  0x00fc -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    '\u03ce'   #  0x00fd -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\u25a0'   #  0x00fe -> BLACK SQUARE
+    '\xa0'     #  0x00ff -> NO-BREAK SPACE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  NULL
+    0x0001: 0x0001,     #  START OF HEADING
+    0x0002: 0x0002,     #  START OF TEXT
+    0x0003: 0x0003,     #  END OF TEXT
+    0x0004: 0x0004,     #  END OF TRANSMISSION
+    0x0005: 0x0005,     #  ENQUIRY
+    0x0006: 0x0006,     #  ACKNOWLEDGE
+    0x0007: 0x0007,     #  BELL
+    0x0008: 0x0008,     #  BACKSPACE
+    0x0009: 0x0009,     #  HORIZONTAL TABULATION
+    0x000a: 0x000a,     #  LINE FEED
+    0x000b: 0x000b,     #  VERTICAL TABULATION
+    0x000c: 0x000c,     #  FORM FEED
+    0x000d: 0x000d,     #  CARRIAGE RETURN
+    0x000e: 0x000e,     #  SHIFT OUT
+    0x000f: 0x000f,     #  SHIFT IN
+    0x0010: 0x0010,     #  DATA LINK ESCAPE
+    0x0011: 0x0011,     #  DEVICE CONTROL ONE
+    0x0012: 0x0012,     #  DEVICE CONTROL TWO
+    0x0013: 0x0013,     #  DEVICE CONTROL THREE
+    0x0014: 0x0014,     #  DEVICE CONTROL FOUR
+    0x0015: 0x0015,     #  NEGATIVE ACKNOWLEDGE
+    0x0016: 0x0016,     #  SYNCHRONOUS IDLE
+    0x0017: 0x0017,     #  END OF TRANSMISSION BLOCK
+    0x0018: 0x0018,     #  CANCEL
+    0x0019: 0x0019,     #  END OF MEDIUM
+    0x001a: 0x001a,     #  SUBSTITUTE
+    0x001b: 0x001b,     #  ESCAPE
+    0x001c: 0x001c,     #  FILE SEPARATOR
+    0x001d: 0x001d,     #  GROUP SEPARATOR
+    0x001e: 0x001e,     #  RECORD SEPARATOR
+    0x001f: 0x001f,     #  UNIT SEPARATOR
+    0x0020: 0x0020,     #  SPACE
+    0x0021: 0x0021,     #  EXCLAMATION MARK
+    0x0022: 0x0022,     #  QUOTATION MARK
+    0x0023: 0x0023,     #  NUMBER SIGN
+    0x0024: 0x0024,     #  DOLLAR SIGN
+    0x0025: 0x0025,     #  PERCENT SIGN
+    0x0026: 0x0026,     #  AMPERSAND
+    0x0027: 0x0027,     #  APOSTROPHE
+    0x0028: 0x0028,     #  LEFT PARENTHESIS
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS
+    0x002a: 0x002a,     #  ASTERISK
+    0x002b: 0x002b,     #  PLUS SIGN
+    0x002c: 0x002c,     #  COMMA
+    0x002d: 0x002d,     #  HYPHEN-MINUS
+    0x002e: 0x002e,     #  FULL STOP
+    0x002f: 0x002f,     #  SOLIDUS
+    0x0030: 0x0030,     #  DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE
+    0x003a: 0x003a,     #  COLON
+    0x003b: 0x003b,     #  SEMICOLON
+    0x003c: 0x003c,     #  LESS-THAN SIGN
+    0x003d: 0x003d,     #  EQUALS SIGN
+    0x003e: 0x003e,     #  GREATER-THAN SIGN
+    0x003f: 0x003f,     #  QUESTION MARK
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET
+    0x005c: 0x005c,     #  REVERSE SOLIDUS
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT
+    0x005f: 0x005f,     #  LOW LINE
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET
+    0x007c: 0x007c,     #  VERTICAL LINE
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  DELETE
+    0x00a0: 0x00ff,     #  NO-BREAK SPACE
+    0x00a3: 0x009c,     #  POUND SIGN
+    0x00a6: 0x008a,     #  BROKEN BAR
+    0x00a7: 0x00f5,     #  SECTION SIGN
+    0x00a8: 0x00f9,     #  DIAERESIS
+    0x00a9: 0x0097,     #  COPYRIGHT SIGN
+    0x00ab: 0x00ae,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00ac: 0x0089,     #  NOT SIGN
+    0x00ad: 0x00f0,     #  SOFT HYPHEN
+    0x00b0: 0x00f8,     #  DEGREE SIGN
+    0x00b1: 0x00f1,     #  PLUS-MINUS SIGN
+    0x00b2: 0x0099,     #  SUPERSCRIPT TWO
+    0x00b3: 0x009a,     #  SUPERSCRIPT THREE
+    0x00b7: 0x0088,     #  MIDDLE DOT
+    0x00bb: 0x00af,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    0x00bd: 0x00ab,     #  VULGAR FRACTION ONE HALF
+    0x0384: 0x00ef,     #  GREEK TONOS
+    0x0385: 0x00f7,     #  GREEK DIALYTIKA TONOS
+    0x0386: 0x0086,     #  GREEK CAPITAL LETTER ALPHA WITH TONOS
+    0x0388: 0x008d,     #  GREEK CAPITAL LETTER EPSILON WITH TONOS
+    0x0389: 0x008f,     #  GREEK CAPITAL LETTER ETA WITH TONOS
+    0x038a: 0x0090,     #  GREEK CAPITAL LETTER IOTA WITH TONOS
+    0x038c: 0x0092,     #  GREEK CAPITAL LETTER OMICRON WITH TONOS
+    0x038e: 0x0095,     #  GREEK CAPITAL LETTER UPSILON WITH TONOS
+    0x038f: 0x0098,     #  GREEK CAPITAL LETTER OMEGA WITH TONOS
+    0x0390: 0x00a1,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    0x0391: 0x00a4,     #  GREEK CAPITAL LETTER ALPHA
+    0x0392: 0x00a5,     #  GREEK CAPITAL LETTER BETA
+    0x0393: 0x00a6,     #  GREEK CAPITAL LETTER GAMMA
+    0x0394: 0x00a7,     #  GREEK CAPITAL LETTER DELTA
+    0x0395: 0x00a8,     #  GREEK CAPITAL LETTER EPSILON
+    0x0396: 0x00a9,     #  GREEK CAPITAL LETTER ZETA
+    0x0397: 0x00aa,     #  GREEK CAPITAL LETTER ETA
+    0x0398: 0x00ac,     #  GREEK CAPITAL LETTER THETA
+    0x0399: 0x00ad,     #  GREEK CAPITAL LETTER IOTA
+    0x039a: 0x00b5,     #  GREEK CAPITAL LETTER KAPPA
+    0x039b: 0x00b6,     #  GREEK CAPITAL LETTER LAMDA
+    0x039c: 0x00b7,     #  GREEK CAPITAL LETTER MU
+    0x039d: 0x00b8,     #  GREEK CAPITAL LETTER NU
+    0x039e: 0x00bd,     #  GREEK CAPITAL LETTER XI
+    0x039f: 0x00be,     #  GREEK CAPITAL LETTER OMICRON
+    0x03a0: 0x00c6,     #  GREEK CAPITAL LETTER PI
+    0x03a1: 0x00c7,     #  GREEK CAPITAL LETTER RHO
+    0x03a3: 0x00cf,     #  GREEK CAPITAL LETTER SIGMA
+    0x03a4: 0x00d0,     #  GREEK CAPITAL LETTER TAU
+    0x03a5: 0x00d1,     #  GREEK CAPITAL LETTER UPSILON
+    0x03a6: 0x00d2,     #  GREEK CAPITAL LETTER PHI
+    0x03a7: 0x00d3,     #  GREEK CAPITAL LETTER CHI
+    0x03a8: 0x00d4,     #  GREEK CAPITAL LETTER PSI
+    0x03a9: 0x00d5,     #  GREEK CAPITAL LETTER OMEGA
+    0x03aa: 0x0091,     #  GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    0x03ab: 0x0096,     #  GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    0x03ac: 0x009b,     #  GREEK SMALL LETTER ALPHA WITH TONOS
+    0x03ad: 0x009d,     #  GREEK SMALL LETTER EPSILON WITH TONOS
+    0x03ae: 0x009e,     #  GREEK SMALL LETTER ETA WITH TONOS
+    0x03af: 0x009f,     #  GREEK SMALL LETTER IOTA WITH TONOS
+    0x03b0: 0x00fc,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    0x03b1: 0x00d6,     #  GREEK SMALL LETTER ALPHA
+    0x03b2: 0x00d7,     #  GREEK SMALL LETTER BETA
+    0x03b3: 0x00d8,     #  GREEK SMALL LETTER GAMMA
+    0x03b4: 0x00dd,     #  GREEK SMALL LETTER DELTA
+    0x03b5: 0x00de,     #  GREEK SMALL LETTER EPSILON
+    0x03b6: 0x00e0,     #  GREEK SMALL LETTER ZETA
+    0x03b7: 0x00e1,     #  GREEK SMALL LETTER ETA
+    0x03b8: 0x00e2,     #  GREEK SMALL LETTER THETA
+    0x03b9: 0x00e3,     #  GREEK SMALL LETTER IOTA
+    0x03ba: 0x00e4,     #  GREEK SMALL LETTER KAPPA
+    0x03bb: 0x00e5,     #  GREEK SMALL LETTER LAMDA
+    0x03bc: 0x00e6,     #  GREEK SMALL LETTER MU
+    0x03bd: 0x00e7,     #  GREEK SMALL LETTER NU
+    0x03be: 0x00e8,     #  GREEK SMALL LETTER XI
+    0x03bf: 0x00e9,     #  GREEK SMALL LETTER OMICRON
+    0x03c0: 0x00ea,     #  GREEK SMALL LETTER PI
+    0x03c1: 0x00eb,     #  GREEK SMALL LETTER RHO
+    0x03c2: 0x00ed,     #  GREEK SMALL LETTER FINAL SIGMA
+    0x03c3: 0x00ec,     #  GREEK SMALL LETTER SIGMA
+    0x03c4: 0x00ee,     #  GREEK SMALL LETTER TAU
+    0x03c5: 0x00f2,     #  GREEK SMALL LETTER UPSILON
+    0x03c6: 0x00f3,     #  GREEK SMALL LETTER PHI
+    0x03c7: 0x00f4,     #  GREEK SMALL LETTER CHI
+    0x03c8: 0x00f6,     #  GREEK SMALL LETTER PSI
+    0x03c9: 0x00fa,     #  GREEK SMALL LETTER OMEGA
+    0x03ca: 0x00a0,     #  GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    0x03cb: 0x00fb,     #  GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    0x03cc: 0x00a2,     #  GREEK SMALL LETTER OMICRON WITH TONOS
+    0x03cd: 0x00a3,     #  GREEK SMALL LETTER UPSILON WITH TONOS
+    0x03ce: 0x00fd,     #  GREEK SMALL LETTER OMEGA WITH TONOS
+    0x2015: 0x008e,     #  HORIZONTAL BAR
+    0x2018: 0x008b,     #  LEFT SINGLE QUOTATION MARK
+    0x2019: 0x008c,     #  RIGHT SINGLE QUOTATION MARK
+    0x2500: 0x00c4,     #  BOX DRAWINGS LIGHT HORIZONTAL
+    0x2502: 0x00b3,     #  BOX DRAWINGS LIGHT VERTICAL
+    0x250c: 0x00da,     #  BOX DRAWINGS LIGHT DOWN AND RIGHT
+    0x2510: 0x00bf,     #  BOX DRAWINGS LIGHT DOWN AND LEFT
+    0x2514: 0x00c0,     #  BOX DRAWINGS LIGHT UP AND RIGHT
+    0x2518: 0x00d9,     #  BOX DRAWINGS LIGHT UP AND LEFT
+    0x251c: 0x00c3,     #  BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    0x2524: 0x00b4,     #  BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    0x252c: 0x00c2,     #  BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    0x2534: 0x00c1,     #  BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    0x253c: 0x00c5,     #  BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    0x2550: 0x00cd,     #  BOX DRAWINGS DOUBLE HORIZONTAL
+    0x2551: 0x00ba,     #  BOX DRAWINGS DOUBLE VERTICAL
+    0x2554: 0x00c9,     #  BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    0x2557: 0x00bb,     #  BOX DRAWINGS DOUBLE DOWN AND LEFT
+    0x255a: 0x00c8,     #  BOX DRAWINGS DOUBLE UP AND RIGHT
+    0x255d: 0x00bc,     #  BOX DRAWINGS DOUBLE UP AND LEFT
+    0x2560: 0x00cc,     #  BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    0x2563: 0x00b9,     #  BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    0x2566: 0x00cb,     #  BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    0x2569: 0x00ca,     #  BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    0x256c: 0x00ce,     #  BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    0x2580: 0x00df,     #  UPPER HALF BLOCK
+    0x2584: 0x00dc,     #  LOWER HALF BLOCK
+    0x2588: 0x00db,     #  FULL BLOCK
+    0x2591: 0x00b0,     #  LIGHT SHADE
+    0x2592: 0x00b1,     #  MEDIUM SHADE
+    0x2593: 0x00b2,     #  DARK SHADE
+    0x25a0: 0x00fe,     #  BLACK SQUARE
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp874.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp874.py
new file mode 100644
index 0000000000000000000000000000000000000000..59bfcbc98ab47d61ab7b7d48caa56379eaf3ca0b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp874.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp874 generated from 'MAPPINGS/VENDORS/MICSFT/WINDOWS/CP874.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp874',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\ufffe'   #  0x81 -> UNDEFINED
+    '\ufffe'   #  0x82 -> UNDEFINED
+    '\ufffe'   #  0x83 -> UNDEFINED
+    '\ufffe'   #  0x84 -> UNDEFINED
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\ufffe'   #  0x86 -> UNDEFINED
+    '\ufffe'   #  0x87 -> UNDEFINED
+    '\ufffe'   #  0x88 -> UNDEFINED
+    '\ufffe'   #  0x89 -> UNDEFINED
+    '\ufffe'   #  0x8A -> UNDEFINED
+    '\ufffe'   #  0x8B -> UNDEFINED
+    '\ufffe'   #  0x8C -> UNDEFINED
+    '\ufffe'   #  0x8D -> UNDEFINED
+    '\ufffe'   #  0x8E -> UNDEFINED
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\ufffe'   #  0x90 -> UNDEFINED
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\ufffe'   #  0x99 -> UNDEFINED
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\ufffe'   #  0x9B -> UNDEFINED
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0e01'   #  0xA1 -> THAI CHARACTER KO KAI
+    '\u0e02'   #  0xA2 -> THAI CHARACTER KHO KHAI
+    '\u0e03'   #  0xA3 -> THAI CHARACTER KHO KHUAT
+    '\u0e04'   #  0xA4 -> THAI CHARACTER KHO KHWAI
+    '\u0e05'   #  0xA5 -> THAI CHARACTER KHO KHON
+    '\u0e06'   #  0xA6 -> THAI CHARACTER KHO RAKHANG
+    '\u0e07'   #  0xA7 -> THAI CHARACTER NGO NGU
+    '\u0e08'   #  0xA8 -> THAI CHARACTER CHO CHAN
+    '\u0e09'   #  0xA9 -> THAI CHARACTER CHO CHING
+    '\u0e0a'   #  0xAA -> THAI CHARACTER CHO CHANG
+    '\u0e0b'   #  0xAB -> THAI CHARACTER SO SO
+    '\u0e0c'   #  0xAC -> THAI CHARACTER CHO CHOE
+    '\u0e0d'   #  0xAD -> THAI CHARACTER YO YING
+    '\u0e0e'   #  0xAE -> THAI CHARACTER DO CHADA
+    '\u0e0f'   #  0xAF -> THAI CHARACTER TO PATAK
+    '\u0e10'   #  0xB0 -> THAI CHARACTER THO THAN
+    '\u0e11'   #  0xB1 -> THAI CHARACTER THO NANGMONTHO
+    '\u0e12'   #  0xB2 -> THAI CHARACTER THO PHUTHAO
+    '\u0e13'   #  0xB3 -> THAI CHARACTER NO NEN
+    '\u0e14'   #  0xB4 -> THAI CHARACTER DO DEK
+    '\u0e15'   #  0xB5 -> THAI CHARACTER TO TAO
+    '\u0e16'   #  0xB6 -> THAI CHARACTER THO THUNG
+    '\u0e17'   #  0xB7 -> THAI CHARACTER THO THAHAN
+    '\u0e18'   #  0xB8 -> THAI CHARACTER THO THONG
+    '\u0e19'   #  0xB9 -> THAI CHARACTER NO NU
+    '\u0e1a'   #  0xBA -> THAI CHARACTER BO BAIMAI
+    '\u0e1b'   #  0xBB -> THAI CHARACTER PO PLA
+    '\u0e1c'   #  0xBC -> THAI CHARACTER PHO PHUNG
+    '\u0e1d'   #  0xBD -> THAI CHARACTER FO FA
+    '\u0e1e'   #  0xBE -> THAI CHARACTER PHO PHAN
+    '\u0e1f'   #  0xBF -> THAI CHARACTER FO FAN
+    '\u0e20'   #  0xC0 -> THAI CHARACTER PHO SAMPHAO
+    '\u0e21'   #  0xC1 -> THAI CHARACTER MO MA
+    '\u0e22'   #  0xC2 -> THAI CHARACTER YO YAK
+    '\u0e23'   #  0xC3 -> THAI CHARACTER RO RUA
+    '\u0e24'   #  0xC4 -> THAI CHARACTER RU
+    '\u0e25'   #  0xC5 -> THAI CHARACTER LO LING
+    '\u0e26'   #  0xC6 -> THAI CHARACTER LU
+    '\u0e27'   #  0xC7 -> THAI CHARACTER WO WAEN
+    '\u0e28'   #  0xC8 -> THAI CHARACTER SO SALA
+    '\u0e29'   #  0xC9 -> THAI CHARACTER SO RUSI
+    '\u0e2a'   #  0xCA -> THAI CHARACTER SO SUA
+    '\u0e2b'   #  0xCB -> THAI CHARACTER HO HIP
+    '\u0e2c'   #  0xCC -> THAI CHARACTER LO CHULA
+    '\u0e2d'   #  0xCD -> THAI CHARACTER O ANG
+    '\u0e2e'   #  0xCE -> THAI CHARACTER HO NOKHUK
+    '\u0e2f'   #  0xCF -> THAI CHARACTER PAIYANNOI
+    '\u0e30'   #  0xD0 -> THAI CHARACTER SARA A
+    '\u0e31'   #  0xD1 -> THAI CHARACTER MAI HAN-AKAT
+    '\u0e32'   #  0xD2 -> THAI CHARACTER SARA AA
+    '\u0e33'   #  0xD3 -> THAI CHARACTER SARA AM
+    '\u0e34'   #  0xD4 -> THAI CHARACTER SARA I
+    '\u0e35'   #  0xD5 -> THAI CHARACTER SARA II
+    '\u0e36'   #  0xD6 -> THAI CHARACTER SARA UE
+    '\u0e37'   #  0xD7 -> THAI CHARACTER SARA UEE
+    '\u0e38'   #  0xD8 -> THAI CHARACTER SARA U
+    '\u0e39'   #  0xD9 -> THAI CHARACTER SARA UU
+    '\u0e3a'   #  0xDA -> THAI CHARACTER PHINTHU
+    '\ufffe'   #  0xDB -> UNDEFINED
+    '\ufffe'   #  0xDC -> UNDEFINED
+    '\ufffe'   #  0xDD -> UNDEFINED
+    '\ufffe'   #  0xDE -> UNDEFINED
+    '\u0e3f'   #  0xDF -> THAI CURRENCY SYMBOL BAHT
+    '\u0e40'   #  0xE0 -> THAI CHARACTER SARA E
+    '\u0e41'   #  0xE1 -> THAI CHARACTER SARA AE
+    '\u0e42'   #  0xE2 -> THAI CHARACTER SARA O
+    '\u0e43'   #  0xE3 -> THAI CHARACTER SARA AI MAIMUAN
+    '\u0e44'   #  0xE4 -> THAI CHARACTER SARA AI MAIMALAI
+    '\u0e45'   #  0xE5 -> THAI CHARACTER LAKKHANGYAO
+    '\u0e46'   #  0xE6 -> THAI CHARACTER MAIYAMOK
+    '\u0e47'   #  0xE7 -> THAI CHARACTER MAITAIKHU
+    '\u0e48'   #  0xE8 -> THAI CHARACTER MAI EK
+    '\u0e49'   #  0xE9 -> THAI CHARACTER MAI THO
+    '\u0e4a'   #  0xEA -> THAI CHARACTER MAI TRI
+    '\u0e4b'   #  0xEB -> THAI CHARACTER MAI CHATTAWA
+    '\u0e4c'   #  0xEC -> THAI CHARACTER THANTHAKHAT
+    '\u0e4d'   #  0xED -> THAI CHARACTER NIKHAHIT
+    '\u0e4e'   #  0xEE -> THAI CHARACTER YAMAKKAN
+    '\u0e4f'   #  0xEF -> THAI CHARACTER FONGMAN
+    '\u0e50'   #  0xF0 -> THAI DIGIT ZERO
+    '\u0e51'   #  0xF1 -> THAI DIGIT ONE
+    '\u0e52'   #  0xF2 -> THAI DIGIT TWO
+    '\u0e53'   #  0xF3 -> THAI DIGIT THREE
+    '\u0e54'   #  0xF4 -> THAI DIGIT FOUR
+    '\u0e55'   #  0xF5 -> THAI DIGIT FIVE
+    '\u0e56'   #  0xF6 -> THAI DIGIT SIX
+    '\u0e57'   #  0xF7 -> THAI DIGIT SEVEN
+    '\u0e58'   #  0xF8 -> THAI DIGIT EIGHT
+    '\u0e59'   #  0xF9 -> THAI DIGIT NINE
+    '\u0e5a'   #  0xFA -> THAI CHARACTER ANGKHANKHU
+    '\u0e5b'   #  0xFB -> THAI CHARACTER KHOMUT
+    '\ufffe'   #  0xFC -> UNDEFINED
+    '\ufffe'   #  0xFD -> UNDEFINED
+    '\ufffe'   #  0xFE -> UNDEFINED
+    '\ufffe'   #  0xFF -> UNDEFINED
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp875.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp875.py
new file mode 100644
index 0000000000000000000000000000000000000000..c25a5a43bc49e1ce821793979b87d39fbbd05d18
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp875.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec cp875 generated from 'MAPPINGS/VENDORS/MICSFT/EBCDIC/CP875.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp875',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x9c'     #  0x04 -> CONTROL
+    '\t'       #  0x05 -> HORIZONTAL TABULATION
+    '\x86'     #  0x06 -> CONTROL
+    '\x7f'     #  0x07 -> DELETE
+    '\x97'     #  0x08 -> CONTROL
+    '\x8d'     #  0x09 -> CONTROL
+    '\x8e'     #  0x0A -> CONTROL
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x9d'     #  0x14 -> CONTROL
+    '\x85'     #  0x15 -> CONTROL
+    '\x08'     #  0x16 -> BACKSPACE
+    '\x87'     #  0x17 -> CONTROL
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x92'     #  0x1A -> CONTROL
+    '\x8f'     #  0x1B -> CONTROL
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    '\x80'     #  0x20 -> CONTROL
+    '\x81'     #  0x21 -> CONTROL
+    '\x82'     #  0x22 -> CONTROL
+    '\x83'     #  0x23 -> CONTROL
+    '\x84'     #  0x24 -> CONTROL
+    '\n'       #  0x25 -> LINE FEED
+    '\x17'     #  0x26 -> END OF TRANSMISSION BLOCK
+    '\x1b'     #  0x27 -> ESCAPE
+    '\x88'     #  0x28 -> CONTROL
+    '\x89'     #  0x29 -> CONTROL
+    '\x8a'     #  0x2A -> CONTROL
+    '\x8b'     #  0x2B -> CONTROL
+    '\x8c'     #  0x2C -> CONTROL
+    '\x05'     #  0x2D -> ENQUIRY
+    '\x06'     #  0x2E -> ACKNOWLEDGE
+    '\x07'     #  0x2F -> BELL
+    '\x90'     #  0x30 -> CONTROL
+    '\x91'     #  0x31 -> CONTROL
+    '\x16'     #  0x32 -> SYNCHRONOUS IDLE
+    '\x93'     #  0x33 -> CONTROL
+    '\x94'     #  0x34 -> CONTROL
+    '\x95'     #  0x35 -> CONTROL
+    '\x96'     #  0x36 -> CONTROL
+    '\x04'     #  0x37 -> END OF TRANSMISSION
+    '\x98'     #  0x38 -> CONTROL
+    '\x99'     #  0x39 -> CONTROL
+    '\x9a'     #  0x3A -> CONTROL
+    '\x9b'     #  0x3B -> CONTROL
+    '\x14'     #  0x3C -> DEVICE CONTROL FOUR
+    '\x15'     #  0x3D -> NEGATIVE ACKNOWLEDGE
+    '\x9e'     #  0x3E -> CONTROL
+    '\x1a'     #  0x3F -> SUBSTITUTE
+    ' '        #  0x40 -> SPACE
+    '\u0391'   #  0x41 -> GREEK CAPITAL LETTER ALPHA
+    '\u0392'   #  0x42 -> GREEK CAPITAL LETTER BETA
+    '\u0393'   #  0x43 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0x44 -> GREEK CAPITAL LETTER DELTA
+    '\u0395'   #  0x45 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0x46 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0x47 -> GREEK CAPITAL LETTER ETA
+    '\u0398'   #  0x48 -> GREEK CAPITAL LETTER THETA
+    '\u0399'   #  0x49 -> GREEK CAPITAL LETTER IOTA
+    '['        #  0x4A -> LEFT SQUARE BRACKET
+    '.'        #  0x4B -> FULL STOP
+    '<'        #  0x4C -> LESS-THAN SIGN
+    '('        #  0x4D -> LEFT PARENTHESIS
+    '+'        #  0x4E -> PLUS SIGN
+    '!'        #  0x4F -> EXCLAMATION MARK
+    '&'        #  0x50 -> AMPERSAND
+    '\u039a'   #  0x51 -> GREEK CAPITAL LETTER KAPPA
+    '\u039b'   #  0x52 -> GREEK CAPITAL LETTER LAMDA
+    '\u039c'   #  0x53 -> GREEK CAPITAL LETTER MU
+    '\u039d'   #  0x54 -> GREEK CAPITAL LETTER NU
+    '\u039e'   #  0x55 -> GREEK CAPITAL LETTER XI
+    '\u039f'   #  0x56 -> GREEK CAPITAL LETTER OMICRON
+    '\u03a0'   #  0x57 -> GREEK CAPITAL LETTER PI
+    '\u03a1'   #  0x58 -> GREEK CAPITAL LETTER RHO
+    '\u03a3'   #  0x59 -> GREEK CAPITAL LETTER SIGMA
+    ']'        #  0x5A -> RIGHT SQUARE BRACKET
+    '$'        #  0x5B -> DOLLAR SIGN
+    '*'        #  0x5C -> ASTERISK
+    ')'        #  0x5D -> RIGHT PARENTHESIS
+    ';'        #  0x5E -> SEMICOLON
+    '^'        #  0x5F -> CIRCUMFLEX ACCENT
+    '-'        #  0x60 -> HYPHEN-MINUS
+    '/'        #  0x61 -> SOLIDUS
+    '\u03a4'   #  0x62 -> GREEK CAPITAL LETTER TAU
+    '\u03a5'   #  0x63 -> GREEK CAPITAL LETTER UPSILON
+    '\u03a6'   #  0x64 -> GREEK CAPITAL LETTER PHI
+    '\u03a7'   #  0x65 -> GREEK CAPITAL LETTER CHI
+    '\u03a8'   #  0x66 -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0x67 -> GREEK CAPITAL LETTER OMEGA
+    '\u03aa'   #  0x68 -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\u03ab'   #  0x69 -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '|'        #  0x6A -> VERTICAL LINE
+    ','        #  0x6B -> COMMA
+    '%'        #  0x6C -> PERCENT SIGN
+    '_'        #  0x6D -> LOW LINE
+    '>'        #  0x6E -> GREATER-THAN SIGN
+    '?'        #  0x6F -> QUESTION MARK
+    '\xa8'     #  0x70 -> DIAERESIS
+    '\u0386'   #  0x71 -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\u0388'   #  0x72 -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u0389'   #  0x73 -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\xa0'     #  0x74 -> NO-BREAK SPACE
+    '\u038a'   #  0x75 -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\u038c'   #  0x76 -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\u038e'   #  0x77 -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u038f'   #  0x78 -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '`'        #  0x79 -> GRAVE ACCENT
+    ':'        #  0x7A -> COLON
+    '#'        #  0x7B -> NUMBER SIGN
+    '@'        #  0x7C -> COMMERCIAL AT
+    "'"        #  0x7D -> APOSTROPHE
+    '='        #  0x7E -> EQUALS SIGN
+    '"'        #  0x7F -> QUOTATION MARK
+    '\u0385'   #  0x80 -> GREEK DIALYTIKA TONOS
+    'a'        #  0x81 -> LATIN SMALL LETTER A
+    'b'        #  0x82 -> LATIN SMALL LETTER B
+    'c'        #  0x83 -> LATIN SMALL LETTER C
+    'd'        #  0x84 -> LATIN SMALL LETTER D
+    'e'        #  0x85 -> LATIN SMALL LETTER E
+    'f'        #  0x86 -> LATIN SMALL LETTER F
+    'g'        #  0x87 -> LATIN SMALL LETTER G
+    'h'        #  0x88 -> LATIN SMALL LETTER H
+    'i'        #  0x89 -> LATIN SMALL LETTER I
+    '\u03b1'   #  0x8A -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0x8B -> GREEK SMALL LETTER BETA
+    '\u03b3'   #  0x8C -> GREEK SMALL LETTER GAMMA
+    '\u03b4'   #  0x8D -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0x8E -> GREEK SMALL LETTER EPSILON
+    '\u03b6'   #  0x8F -> GREEK SMALL LETTER ZETA
+    '\xb0'     #  0x90 -> DEGREE SIGN
+    'j'        #  0x91 -> LATIN SMALL LETTER J
+    'k'        #  0x92 -> LATIN SMALL LETTER K
+    'l'        #  0x93 -> LATIN SMALL LETTER L
+    'm'        #  0x94 -> LATIN SMALL LETTER M
+    'n'        #  0x95 -> LATIN SMALL LETTER N
+    'o'        #  0x96 -> LATIN SMALL LETTER O
+    'p'        #  0x97 -> LATIN SMALL LETTER P
+    'q'        #  0x98 -> LATIN SMALL LETTER Q
+    'r'        #  0x99 -> LATIN SMALL LETTER R
+    '\u03b7'   #  0x9A -> GREEK SMALL LETTER ETA
+    '\u03b8'   #  0x9B -> GREEK SMALL LETTER THETA
+    '\u03b9'   #  0x9C -> GREEK SMALL LETTER IOTA
+    '\u03ba'   #  0x9D -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0x9E -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0x9F -> GREEK SMALL LETTER MU
+    '\xb4'     #  0xA0 -> ACUTE ACCENT
+    '~'        #  0xA1 -> TILDE
+    's'        #  0xA2 -> LATIN SMALL LETTER S
+    't'        #  0xA3 -> LATIN SMALL LETTER T
+    'u'        #  0xA4 -> LATIN SMALL LETTER U
+    'v'        #  0xA5 -> LATIN SMALL LETTER V
+    'w'        #  0xA6 -> LATIN SMALL LETTER W
+    'x'        #  0xA7 -> LATIN SMALL LETTER X
+    'y'        #  0xA8 -> LATIN SMALL LETTER Y
+    'z'        #  0xA9 -> LATIN SMALL LETTER Z
+    '\u03bd'   #  0xAA -> GREEK SMALL LETTER NU
+    '\u03be'   #  0xAB -> GREEK SMALL LETTER XI
+    '\u03bf'   #  0xAC -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0xAD -> GREEK SMALL LETTER PI
+    '\u03c1'   #  0xAE -> GREEK SMALL LETTER RHO
+    '\u03c3'   #  0xAF -> GREEK SMALL LETTER SIGMA
+    '\xa3'     #  0xB0 -> POUND SIGN
+    '\u03ac'   #  0xB1 -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\u03ad'   #  0xB2 -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0xB3 -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03ca'   #  0xB4 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u03af'   #  0xB5 -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03cc'   #  0xB6 -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u03cd'   #  0xB7 -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u03cb'   #  0xB8 -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u03ce'   #  0xB9 -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\u03c2'   #  0xBA -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c4'   #  0xBB -> GREEK SMALL LETTER TAU
+    '\u03c5'   #  0xBC -> GREEK SMALL LETTER UPSILON
+    '\u03c6'   #  0xBD -> GREEK SMALL LETTER PHI
+    '\u03c7'   #  0xBE -> GREEK SMALL LETTER CHI
+    '\u03c8'   #  0xBF -> GREEK SMALL LETTER PSI
+    '{'        #  0xC0 -> LEFT CURLY BRACKET
+    'A'        #  0xC1 -> LATIN CAPITAL LETTER A
+    'B'        #  0xC2 -> LATIN CAPITAL LETTER B
+    'C'        #  0xC3 -> LATIN CAPITAL LETTER C
+    'D'        #  0xC4 -> LATIN CAPITAL LETTER D
+    'E'        #  0xC5 -> LATIN CAPITAL LETTER E
+    'F'        #  0xC6 -> LATIN CAPITAL LETTER F
+    'G'        #  0xC7 -> LATIN CAPITAL LETTER G
+    'H'        #  0xC8 -> LATIN CAPITAL LETTER H
+    'I'        #  0xC9 -> LATIN CAPITAL LETTER I
+    '\xad'     #  0xCA -> SOFT HYPHEN
+    '\u03c9'   #  0xCB -> GREEK SMALL LETTER OMEGA
+    '\u0390'   #  0xCC -> GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    '\u03b0'   #  0xCD -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    '\u2018'   #  0xCE -> LEFT SINGLE QUOTATION MARK
+    '\u2015'   #  0xCF -> HORIZONTAL BAR
+    '}'        #  0xD0 -> RIGHT CURLY BRACKET
+    'J'        #  0xD1 -> LATIN CAPITAL LETTER J
+    'K'        #  0xD2 -> LATIN CAPITAL LETTER K
+    'L'        #  0xD3 -> LATIN CAPITAL LETTER L
+    'M'        #  0xD4 -> LATIN CAPITAL LETTER M
+    'N'        #  0xD5 -> LATIN CAPITAL LETTER N
+    'O'        #  0xD6 -> LATIN CAPITAL LETTER O
+    'P'        #  0xD7 -> LATIN CAPITAL LETTER P
+    'Q'        #  0xD8 -> LATIN CAPITAL LETTER Q
+    'R'        #  0xD9 -> LATIN CAPITAL LETTER R
+    '\xb1'     #  0xDA -> PLUS-MINUS SIGN
+    '\xbd'     #  0xDB -> VULGAR FRACTION ONE HALF
+    '\x1a'     #  0xDC -> SUBSTITUTE
+    '\u0387'   #  0xDD -> GREEK ANO TELEIA
+    '\u2019'   #  0xDE -> RIGHT SINGLE QUOTATION MARK
+    '\xa6'     #  0xDF -> BROKEN BAR
+    '\\'       #  0xE0 -> REVERSE SOLIDUS
+    '\x1a'     #  0xE1 -> SUBSTITUTE
+    'S'        #  0xE2 -> LATIN CAPITAL LETTER S
+    'T'        #  0xE3 -> LATIN CAPITAL LETTER T
+    'U'        #  0xE4 -> LATIN CAPITAL LETTER U
+    'V'        #  0xE5 -> LATIN CAPITAL LETTER V
+    'W'        #  0xE6 -> LATIN CAPITAL LETTER W
+    'X'        #  0xE7 -> LATIN CAPITAL LETTER X
+    'Y'        #  0xE8 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0xE9 -> LATIN CAPITAL LETTER Z
+    '\xb2'     #  0xEA -> SUPERSCRIPT TWO
+    '\xa7'     #  0xEB -> SECTION SIGN
+    '\x1a'     #  0xEC -> SUBSTITUTE
+    '\x1a'     #  0xED -> SUBSTITUTE
+    '\xab'     #  0xEE -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xEF -> NOT SIGN
+    '0'        #  0xF0 -> DIGIT ZERO
+    '1'        #  0xF1 -> DIGIT ONE
+    '2'        #  0xF2 -> DIGIT TWO
+    '3'        #  0xF3 -> DIGIT THREE
+    '4'        #  0xF4 -> DIGIT FOUR
+    '5'        #  0xF5 -> DIGIT FIVE
+    '6'        #  0xF6 -> DIGIT SIX
+    '7'        #  0xF7 -> DIGIT SEVEN
+    '8'        #  0xF8 -> DIGIT EIGHT
+    '9'        #  0xF9 -> DIGIT NINE
+    '\xb3'     #  0xFA -> SUPERSCRIPT THREE
+    '\xa9'     #  0xFB -> COPYRIGHT SIGN
+    '\x1a'     #  0xFC -> SUBSTITUTE
+    '\x1a'     #  0xFD -> SUBSTITUTE
+    '\xbb'     #  0xFE -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\x9f'     #  0xFF -> CONTROL
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp932.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp932.py
new file mode 100644
index 0000000000000000000000000000000000000000..e01f59b719057657c65f739e43fc0400722293e6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp932.py
@@ -0,0 +1,39 @@
+#
+# cp932.py: Python Unicode Codec for CP932
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('cp932')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp932',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp949.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp949.py
new file mode 100644
index 0000000000000000000000000000000000000000..627c87125e2affe4bc75eae769f901a54e2f92fb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp949.py
@@ -0,0 +1,39 @@
+#
+# cp949.py: Python Unicode Codec for CP949
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_kr, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_kr.getcodec('cp949')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp949',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp950.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp950.py
new file mode 100644
index 0000000000000000000000000000000000000000..39eec5ed0ddef9579cf1be928acfd1a2cf37d39b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/cp950.py
@@ -0,0 +1,39 @@
+#
+# cp950.py: Python Unicode Codec for CP950
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_tw, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_tw.getcodec('cp950')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='cp950',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jis_2004.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jis_2004.py
new file mode 100644
index 0000000000000000000000000000000000000000..72b87aea68862f2fabbb7b30274e683a6654d4ae
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jis_2004.py
@@ -0,0 +1,39 @@
+#
+# euc_jis_2004.py: Python Unicode Codec for EUC_JIS_2004
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('euc_jis_2004')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='euc_jis_2004',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jisx0213.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jisx0213.py
new file mode 100644
index 0000000000000000000000000000000000000000..cc47d04112a187d585dce4af4bd76a38e89e0f51
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jisx0213.py
@@ -0,0 +1,39 @@
+#
+# euc_jisx0213.py: Python Unicode Codec for EUC_JISX0213
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('euc_jisx0213')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='euc_jisx0213',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jp.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jp.py
new file mode 100644
index 0000000000000000000000000000000000000000..7bcbe4147f2ad49c6a0d3a9cc6eb5417cdabdf2d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_jp.py
@@ -0,0 +1,39 @@
+#
+# euc_jp.py: Python Unicode Codec for EUC_JP
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('euc_jp')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='euc_jp',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_kr.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_kr.py
new file mode 100644
index 0000000000000000000000000000000000000000..c1fb1260e879f0c42491be24b6a0cd0b8a365122
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/euc_kr.py
@@ -0,0 +1,39 @@
+#
+# euc_kr.py: Python Unicode Codec for EUC_KR
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_kr, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_kr.getcodec('euc_kr')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='euc_kr',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb18030.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb18030.py
new file mode 100644
index 0000000000000000000000000000000000000000..34fb6c366a76147b9e2b4a62f886b2a91eb6add8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb18030.py
@@ -0,0 +1,39 @@
+#
+# gb18030.py: Python Unicode Codec for GB18030
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_cn, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_cn.getcodec('gb18030')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='gb18030',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb2312.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb2312.py
new file mode 100644
index 0000000000000000000000000000000000000000..3c3b837d618ecd262007eec7d3bd786209e91c06
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gb2312.py
@@ -0,0 +1,39 @@
+#
+# gb2312.py: Python Unicode Codec for GB2312
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_cn, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_cn.getcodec('gb2312')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='gb2312',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gbk.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gbk.py
new file mode 100644
index 0000000000000000000000000000000000000000..1b45db89859cdf58931436a954e7eb304b5962b8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/gbk.py
@@ -0,0 +1,39 @@
+#
+# gbk.py: Python Unicode Codec for GBK
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_cn, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_cn.getcodec('gbk')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='gbk',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hex_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hex_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..9fb1072804456a36469dd527c4c713b56e614fe3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hex_codec.py
@@ -0,0 +1,55 @@
+"""Python 'hex_codec' Codec - 2-digit hex content transfer encoding.
+
+This codec de/encodes from bytes to bytes.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+"""
+
+import codecs
+import binascii
+
+### Codec APIs
+
+def hex_encode(input, errors='strict'):
+    assert errors == 'strict'
+    return (binascii.b2a_hex(input), len(input))
+
+def hex_decode(input, errors='strict'):
+    assert errors == 'strict'
+    return (binascii.a2b_hex(input), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return hex_encode(input, errors)
+    def decode(self, input, errors='strict'):
+        return hex_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        assert self.errors == 'strict'
+        return binascii.b2a_hex(input)
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        assert self.errors == 'strict'
+        return binascii.a2b_hex(input)
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='hex',
+        encode=hex_encode,
+        decode=hex_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hp_roman8.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hp_roman8.py
new file mode 100644
index 0000000000000000000000000000000000000000..58de1033c13b76048f543617c2b6901e7848005b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hp_roman8.py
@@ -0,0 +1,314 @@
+""" Python Character Mapping Codec generated from 'hp_roman8.txt' with gencodec.py.
+
+    Based on data from ftp://dkuug.dk/i18n/charmaps/HP-ROMAN8 (Keld Simonsen)
+
+    Original source: LaserJet IIP Printer User's Manual HP part no
+    33471-90901, Hewlet-Packard, June 1989.
+
+    (Used with permission)
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='hp-roman8',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xc0'     #  0xA1 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc2'     #  0xA2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc8'     #  0xA3 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xca'     #  0xA4 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xA5 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xce'     #  0xA6 -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xA7 -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xb4'     #  0xA8 -> ACUTE ACCENT
+    '\u02cb'   #  0xA9 -> MODIFIER LETTER GRAVE ACCENT (MANDARIN CHINESE FOURTH TONE)
+    '\u02c6'   #  0xAA -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\xa8'     #  0xAB -> DIAERESIS
+    '\u02dc'   #  0xAC -> SMALL TILDE
+    '\xd9'     #  0xAD -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xdb'     #  0xAE -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\u20a4'   #  0xAF -> LIRA SIGN
+    '\xaf'     #  0xB0 -> MACRON
+    '\xdd'     #  0xB1 -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xfd'     #  0xB2 -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xb0'     #  0xB3 -> DEGREE SIGN
+    '\xc7'     #  0xB4 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xe7'     #  0xB5 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xd1'     #  0xB6 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xf1'     #  0xB7 -> LATIN SMALL LETTER N WITH TILDE
+    '\xa1'     #  0xB8 -> INVERTED EXCLAMATION MARK
+    '\xbf'     #  0xB9 -> INVERTED QUESTION MARK
+    '\xa4'     #  0xBA -> CURRENCY SIGN
+    '\xa3'     #  0xBB -> POUND SIGN
+    '\xa5'     #  0xBC -> YEN SIGN
+    '\xa7'     #  0xBD -> SECTION SIGN
+    '\u0192'   #  0xBE -> LATIN SMALL LETTER F WITH HOOK
+    '\xa2'     #  0xBF -> CENT SIGN
+    '\xe2'     #  0xC0 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xea'     #  0xC1 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xf4'     #  0xC2 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xfb'     #  0xC3 -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xe1'     #  0xC4 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe9'     #  0xC5 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xf3'     #  0xC6 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xfa'     #  0xC7 -> LATIN SMALL LETTER U WITH ACUTE
+    '\xe0'     #  0xC8 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe8'     #  0xC9 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xf2'     #  0xCA -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf9'     #  0xCB -> LATIN SMALL LETTER U WITH GRAVE
+    '\xe4'     #  0xCC -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xeb'     #  0xCD -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xf6'     #  0xCE -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xfc'     #  0xCF -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xc5'     #  0xD0 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xee'     #  0xD1 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xd8'     #  0xD2 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xc6'     #  0xD3 -> LATIN CAPITAL LETTER AE
+    '\xe5'     #  0xD4 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xed'     #  0xD5 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xf8'     #  0xD6 -> LATIN SMALL LETTER O WITH STROKE
+    '\xe6'     #  0xD7 -> LATIN SMALL LETTER AE
+    '\xc4'     #  0xD8 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xec'     #  0xD9 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xd6'     #  0xDA -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0xDB -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xc9'     #  0xDC -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xef'     #  0xDD -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xdf'     #  0xDE -> LATIN SMALL LETTER SHARP S (GERMAN)
+    '\xd4'     #  0xDF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xc1'     #  0xE0 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc3'     #  0xE1 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xe3'     #  0xE2 -> LATIN SMALL LETTER A WITH TILDE
+    '\xd0'     #  0xE3 -> LATIN CAPITAL LETTER ETH (ICELANDIC)
+    '\xf0'     #  0xE4 -> LATIN SMALL LETTER ETH (ICELANDIC)
+    '\xcd'     #  0xE5 -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xcc'     #  0xE6 -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xE7 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd2'     #  0xE8 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd5'     #  0xE9 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xf5'     #  0xEA -> LATIN SMALL LETTER O WITH TILDE
+    '\u0160'   #  0xEB -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0161'   #  0xEC -> LATIN SMALL LETTER S WITH CARON
+    '\xda'     #  0xED -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\u0178'   #  0xEE -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xff'     #  0xEF -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\xde'     #  0xF0 -> LATIN CAPITAL LETTER THORN (ICELANDIC)
+    '\xfe'     #  0xF1 -> LATIN SMALL LETTER THORN (ICELANDIC)
+    '\xb7'     #  0xF2 -> MIDDLE DOT
+    '\xb5'     #  0xF3 -> MICRO SIGN
+    '\xb6'     #  0xF4 -> PILCROW SIGN
+    '\xbe'     #  0xF5 -> VULGAR FRACTION THREE QUARTERS
+    '\u2014'   #  0xF6 -> EM DASH
+    '\xbc'     #  0xF7 -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xF8 -> VULGAR FRACTION ONE HALF
+    '\xaa'     #  0xF9 -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xFA -> MASCULINE ORDINAL INDICATOR
+    '\xab'     #  0xFB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u25a0'   #  0xFC -> BLACK SQUARE
+    '\xbb'     #  0xFD -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xb1'     #  0xFE -> PLUS-MINUS SIGN
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hz.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hz.py
new file mode 100644
index 0000000000000000000000000000000000000000..383442a3c9ac9ae5d093d972f1ff26fe758897d5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/hz.py
@@ -0,0 +1,39 @@
+#
+# hz.py: Python Unicode Codec for HZ
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_cn, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_cn.getcodec('hz')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='hz',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/idna.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/idna.py
new file mode 100644
index 0000000000000000000000000000000000000000..0c90b4c9fe18fad8e2fa6f0dbb7ae39edb0726a3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/idna.py
@@ -0,0 +1,387 @@
+# This module implements the RFCs 3490 (IDNA) and 3491 (Nameprep)
+
+import stringprep, re, codecs
+from unicodedata import ucd_3_2_0 as unicodedata
+
+# IDNA section 3.1
+dots = re.compile("[\u002E\u3002\uFF0E\uFF61]")
+
+# IDNA section 5
+ace_prefix = b"xn--"
+sace_prefix = "xn--"
+
+# This assumes query strings, so AllowUnassigned is true
+def nameprep(label):  # type: (str) -> str
+    # Map
+    newlabel = []
+    for c in label:
+        if stringprep.in_table_b1(c):
+            # Map to nothing
+            continue
+        newlabel.append(stringprep.map_table_b2(c))
+    label = "".join(newlabel)
+
+    # Normalize
+    label = unicodedata.normalize("NFKC", label)
+
+    # Prohibit
+    for i, c in enumerate(label):
+        if stringprep.in_table_c12(c) or \
+           stringprep.in_table_c22(c) or \
+           stringprep.in_table_c3(c) or \
+           stringprep.in_table_c4(c) or \
+           stringprep.in_table_c5(c) or \
+           stringprep.in_table_c6(c) or \
+           stringprep.in_table_c7(c) or \
+           stringprep.in_table_c8(c) or \
+           stringprep.in_table_c9(c):
+            raise UnicodeEncodeError("idna", label, i, i+1, f"Invalid character {c!r}")
+
+    # Check bidi
+    RandAL = [stringprep.in_table_d1(x) for x in label]
+    if any(RandAL):
+        # There is a RandAL char in the string. Must perform further
+        # tests:
+        # 1) The characters in section 5.8 MUST be prohibited.
+        # This is table C.8, which was already checked
+        # 2) If a string contains any RandALCat character, the string
+        # MUST NOT contain any LCat character.
+        for i, x in enumerate(label):
+            if stringprep.in_table_d2(x):
+                raise UnicodeEncodeError("idna", label, i, i+1,
+                                         "Violation of BIDI requirement 2")
+        # 3) If a string contains any RandALCat character, a
+        # RandALCat character MUST be the first character of the
+        # string, and a RandALCat character MUST be the last
+        # character of the string.
+        if not RandAL[0]:
+            raise UnicodeEncodeError("idna", label, 0, 1,
+                                     "Violation of BIDI requirement 3")
+        if not RandAL[-1]:
+            raise UnicodeEncodeError("idna", label, len(label)-1, len(label),
+                                     "Violation of BIDI requirement 3")
+
+    return label
+
+def ToASCII(label):  # type: (str) -> bytes
+    try:
+        # Step 1: try ASCII
+        label_ascii = label.encode("ascii")
+    except UnicodeEncodeError:
+        pass
+    else:
+        # Skip to step 3: UseSTD3ASCIIRules is false, so
+        # Skip to step 8.
+        if 0 < len(label_ascii) < 64:
+            return label_ascii
+        if len(label) == 0:
+            raise UnicodeEncodeError("idna", label, 0, 1, "label empty")
+        else:
+            raise UnicodeEncodeError("idna", label, 0, len(label), "label too long")
+
+    # Step 2: nameprep
+    label = nameprep(label)
+
+    # Step 3: UseSTD3ASCIIRules is false
+    # Step 4: try ASCII
+    try:
+        label_ascii = label.encode("ascii")
+    except UnicodeEncodeError:
+        pass
+    else:
+        # Skip to step 8.
+        if 0 < len(label) < 64:
+            return label_ascii
+        if len(label) == 0:
+            raise UnicodeEncodeError("idna", label, 0, 1, "label empty")
+        else:
+            raise UnicodeEncodeError("idna", label, 0, len(label), "label too long")
+
+    # Step 5: Check ACE prefix
+    if label.lower().startswith(sace_prefix):
+        raise UnicodeEncodeError(
+            "idna", label, 0, len(sace_prefix), "Label starts with ACE prefix")
+
+    # Step 6: Encode with PUNYCODE
+    label_ascii = label.encode("punycode")
+
+    # Step 7: Prepend ACE prefix
+    label_ascii = ace_prefix + label_ascii
+
+    # Step 8: Check size
+    # do not check for empty as we prepend ace_prefix.
+    if len(label_ascii) < 64:
+        return label_ascii
+    raise UnicodeEncodeError("idna", label, 0, len(label), "label too long")
+
+def ToUnicode(label):
+    if len(label) > 1024:
+        # Protection from https://github.com/python/cpython/issues/98433.
+        # https://datatracker.ietf.org/doc/html/rfc5894#section-6
+        # doesn't specify a label size limit prior to NAMEPREP. But having
+        # one makes practical sense.
+        # This leaves ample room for nameprep() to remove Nothing characters
+        # per https://www.rfc-editor.org/rfc/rfc3454#section-3.1 while still
+        # preventing us from wasting time decoding a big thing that'll just
+        # hit the actual <= 63 length limit in Step 6.
+        if isinstance(label, str):
+            label = label.encode("utf-8", errors="backslashreplace")
+        raise UnicodeDecodeError("idna", label, 0, len(label), "label way too long")
+    # Step 1: Check for ASCII
+    if isinstance(label, bytes):
+        pure_ascii = True
+    else:
+        try:
+            label = label.encode("ascii")
+            pure_ascii = True
+        except UnicodeEncodeError:
+            pure_ascii = False
+    if not pure_ascii:
+        assert isinstance(label, str)
+        # Step 2: Perform nameprep
+        label = nameprep(label)
+        # It doesn't say this, but apparently, it should be ASCII now
+        try:
+            label = label.encode("ascii")
+        except UnicodeEncodeError as exc:
+            raise UnicodeEncodeError("idna", label, exc.start, exc.end,
+                                     "Invalid character in IDN label")
+    # Step 3: Check for ACE prefix
+    assert isinstance(label, bytes)
+    if not label.lower().startswith(ace_prefix):
+        return str(label, "ascii")
+
+    # Step 4: Remove ACE prefix
+    label1 = label[len(ace_prefix):]
+
+    # Step 5: Decode using PUNYCODE
+    try:
+        result = label1.decode("punycode")
+    except UnicodeDecodeError as exc:
+        offset = len(ace_prefix)
+        raise UnicodeDecodeError("idna", label, offset+exc.start, offset+exc.end, exc.reason)
+
+    # Step 6: Apply ToASCII
+    label2 = ToASCII(result)
+
+    # Step 7: Compare the result of step 6 with the one of step 3
+    # label2 will already be in lower case.
+    if str(label, "ascii").lower() != str(label2, "ascii"):
+        raise UnicodeDecodeError("idna", label, 0, len(label),
+                                 f"IDNA does not round-trip, '{label!r}' != '{label2!r}'")
+
+    # Step 8: return the result of step 5
+    return result
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+
+        if errors != 'strict':
+            # IDNA is quite clear that implementations must be strict
+            raise UnicodeError(f"Unsupported error handling: {errors}")
+
+        if not input:
+            return b'', 0
+
+        try:
+            result = input.encode('ascii')
+        except UnicodeEncodeError:
+            pass
+        else:
+            # ASCII name: fast path
+            labels = result.split(b'.')
+            for i, label in enumerate(labels[:-1]):
+                if len(label) == 0:
+                    offset = sum(len(l) for l in labels[:i]) + i
+                    raise UnicodeEncodeError("idna", input, offset, offset+1,
+                                             "label empty")
+            for i, label in enumerate(labels):
+                if len(label) >= 64:
+                    offset = sum(len(l) for l in labels[:i]) + i
+                    raise UnicodeEncodeError("idna", input, offset, offset+len(label),
+                                             "label too long")
+            return result, len(input)
+
+        result = bytearray()
+        labels = dots.split(input)
+        if labels and not labels[-1]:
+            trailing_dot = b'.'
+            del labels[-1]
+        else:
+            trailing_dot = b''
+        for i, label in enumerate(labels):
+            if result:
+                # Join with U+002E
+                result.extend(b'.')
+            try:
+                result.extend(ToASCII(label))
+            except (UnicodeEncodeError, UnicodeDecodeError) as exc:
+                offset = sum(len(l) for l in labels[:i]) + i
+                raise UnicodeEncodeError(
+                    "idna",
+                    input,
+                    offset + exc.start,
+                    offset + exc.end,
+                    exc.reason,
+                )
+        return bytes(result+trailing_dot), len(input)
+
+    def decode(self, input, errors='strict'):
+
+        if errors != 'strict':
+            raise UnicodeError(f"Unsupported error handling: {errors}")
+
+        if not input:
+            return "", 0
+
+        # IDNA allows decoding to operate on Unicode strings, too.
+        if not isinstance(input, bytes):
+            # XXX obviously wrong, see #3232
+            input = bytes(input)
+
+        if ace_prefix not in input.lower():
+            # Fast path
+            try:
+                return input.decode('ascii'), len(input)
+            except UnicodeDecodeError:
+                pass
+
+        labels = input.split(b".")
+
+        if labels and len(labels[-1]) == 0:
+            trailing_dot = '.'
+            del labels[-1]
+        else:
+            trailing_dot = ''
+
+        result = []
+        for i, label in enumerate(labels):
+            try:
+                u_label = ToUnicode(label)
+            except (UnicodeEncodeError, UnicodeDecodeError) as exc:
+                offset = sum(len(x) for x in labels[:i]) + len(labels[:i])
+                raise UnicodeDecodeError(
+                    "idna", input, offset+exc.start, offset+exc.end, exc.reason)
+            else:
+                result.append(u_label)
+
+        return ".".join(result)+trailing_dot, len(input)
+
+class IncrementalEncoder(codecs.BufferedIncrementalEncoder):
+    def _buffer_encode(self, input, errors, final):
+        if errors != 'strict':
+            # IDNA is quite clear that implementations must be strict
+            raise UnicodeError(f"Unsupported error handling: {errors}")
+
+        if not input:
+            return (b'', 0)
+
+        labels = dots.split(input)
+        trailing_dot = b''
+        if labels:
+            if not labels[-1]:
+                trailing_dot = b'.'
+                del labels[-1]
+            elif not final:
+                # Keep potentially unfinished label until the next call
+                del labels[-1]
+                if labels:
+                    trailing_dot = b'.'
+
+        result = bytearray()
+        size = 0
+        for label in labels:
+            if size:
+                # Join with U+002E
+                result.extend(b'.')
+                size += 1
+            try:
+                result.extend(ToASCII(label))
+            except (UnicodeEncodeError, UnicodeDecodeError) as exc:
+                raise UnicodeEncodeError(
+                    "idna",
+                    input,
+                    size + exc.start,
+                    size + exc.end,
+                    exc.reason,
+                )
+            size += len(label)
+
+        result += trailing_dot
+        size += len(trailing_dot)
+        return (bytes(result), size)
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def _buffer_decode(self, input, errors, final):
+        if errors != 'strict':
+            raise UnicodeError(f"Unsupported error handling: {errors}")
+
+        if not input:
+            return ("", 0)
+
+        # IDNA allows decoding to operate on Unicode strings, too.
+        if isinstance(input, str):
+            labels = dots.split(input)
+        else:
+            # Must be ASCII string
+            try:
+                input = str(input, "ascii")
+            except (UnicodeEncodeError, UnicodeDecodeError) as exc:
+                raise UnicodeDecodeError("idna", input,
+                                         exc.start, exc.end, exc.reason)
+            labels = input.split(".")
+
+        trailing_dot = ''
+        if labels:
+            if not labels[-1]:
+                trailing_dot = '.'
+                del labels[-1]
+            elif not final:
+                # Keep potentially unfinished label until the next call
+                del labels[-1]
+                if labels:
+                    trailing_dot = '.'
+
+        result = []
+        size = 0
+        for label in labels:
+            try:
+                u_label = ToUnicode(label)
+            except (UnicodeEncodeError, UnicodeDecodeError) as exc:
+                raise UnicodeDecodeError(
+                    "idna",
+                    input.encode("ascii", errors="backslashreplace"),
+                    size + exc.start,
+                    size + exc.end,
+                    exc.reason,
+                )
+            else:
+                result.append(u_label)
+            if size:
+                size += 1
+            size += len(label)
+
+        result = ".".join(result) + trailing_dot
+        size += len(trailing_dot)
+        return (result, size)
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='idna',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp.py
new file mode 100644
index 0000000000000000000000000000000000000000..ab0406069356e4dfd7cfcc4a981535c40c9c5574
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp.py: Python Unicode Codec for ISO2022_JP
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_1.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_1.py
new file mode 100644
index 0000000000000000000000000000000000000000..997044dc3787496be0ed70f2ed1b63d9ebe1b0ac
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_1.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp_1.py: Python Unicode Codec for ISO2022_JP_1
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp_1')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp_1',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2.py
new file mode 100644
index 0000000000000000000000000000000000000000..9106bf762512fdd3e9deb73cba91529ab0db94ac
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp_2.py: Python Unicode Codec for ISO2022_JP_2
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp_2')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp_2',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2004.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2004.py
new file mode 100644
index 0000000000000000000000000000000000000000..40198bf098570be21f67335c42fbf9f956204725
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_2004.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp_2004.py: Python Unicode Codec for ISO2022_JP_2004
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp_2004')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp_2004',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_3.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_3.py
new file mode 100644
index 0000000000000000000000000000000000000000..346e08beccbbafd347371743ec89333370d3b083
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_3.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp_3.py: Python Unicode Codec for ISO2022_JP_3
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp_3')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp_3',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_ext.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_ext.py
new file mode 100644
index 0000000000000000000000000000000000000000..752bab9813a094e9446b084ae90957290f1324c0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_jp_ext.py
@@ -0,0 +1,39 @@
+#
+# iso2022_jp_ext.py: Python Unicode Codec for ISO2022_JP_EXT
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_jp_ext')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_jp_ext',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_kr.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_kr.py
new file mode 100644
index 0000000000000000000000000000000000000000..bf7018763eae38729d6c206379467f36e41910c3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso2022_kr.py
@@ -0,0 +1,39 @@
+#
+# iso2022_kr.py: Python Unicode Codec for ISO2022_KR
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_iso2022, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_iso2022.getcodec('iso2022_kr')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso2022_kr',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_1.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_1.py
new file mode 100644
index 0000000000000000000000000000000000000000..8cfc01fe14e4853c69c76e5cb9bb0659cd2b8d2a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_1.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_1 generated from 'MAPPINGS/ISO8859/8859-1.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-1',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xd0'     #  0xD0 -> LATIN CAPITAL LETTER ETH (Icelandic)
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN (Icelandic)
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S (German)
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf0'     #  0xF0 -> LATIN SMALL LETTER ETH (Icelandic)
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0xFE -> LATIN SMALL LETTER THORN (Icelandic)
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_10.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_10.py
new file mode 100644
index 0000000000000000000000000000000000000000..b4fb0419c42c2d26a50f6896d7af46c72d91ac71
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_10.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_10 generated from 'MAPPINGS/ISO8859/8859-10.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-10',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0104'   #  0xA1 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u0112'   #  0xA2 -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u0122'   #  0xA3 -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\u012a'   #  0xA4 -> LATIN CAPITAL LETTER I WITH MACRON
+    '\u0128'   #  0xA5 -> LATIN CAPITAL LETTER I WITH TILDE
+    '\u0136'   #  0xA6 -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u013b'   #  0xA8 -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\u0110'   #  0xA9 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u0160'   #  0xAA -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0166'   #  0xAB -> LATIN CAPITAL LETTER T WITH STROKE
+    '\u017d'   #  0xAC -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u016a'   #  0xAE -> LATIN CAPITAL LETTER U WITH MACRON
+    '\u014a'   #  0xAF -> LATIN CAPITAL LETTER ENG
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\u0105'   #  0xB1 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u0113'   #  0xB2 -> LATIN SMALL LETTER E WITH MACRON
+    '\u0123'   #  0xB3 -> LATIN SMALL LETTER G WITH CEDILLA
+    '\u012b'   #  0xB4 -> LATIN SMALL LETTER I WITH MACRON
+    '\u0129'   #  0xB5 -> LATIN SMALL LETTER I WITH TILDE
+    '\u0137'   #  0xB6 -> LATIN SMALL LETTER K WITH CEDILLA
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u013c'   #  0xB8 -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u0111'   #  0xB9 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0161'   #  0xBA -> LATIN SMALL LETTER S WITH CARON
+    '\u0167'   #  0xBB -> LATIN SMALL LETTER T WITH STROKE
+    '\u017e'   #  0xBC -> LATIN SMALL LETTER Z WITH CARON
+    '\u2015'   #  0xBD -> HORIZONTAL BAR
+    '\u016b'   #  0xBE -> LATIN SMALL LETTER U WITH MACRON
+    '\u014b'   #  0xBF -> LATIN SMALL LETTER ENG
+    '\u0100'   #  0xC0 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\u012e'   #  0xC7 -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0118'   #  0xCA -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u0116'   #  0xCC -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xd0'     #  0xD0 -> LATIN CAPITAL LETTER ETH (Icelandic)
+    '\u0145'   #  0xD1 -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\u014c'   #  0xD2 -> LATIN CAPITAL LETTER O WITH MACRON
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\u0168'   #  0xD7 -> LATIN CAPITAL LETTER U WITH TILDE
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u0172'   #  0xD9 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN (Icelandic)
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S (German)
+    '\u0101'   #  0xE0 -> LATIN SMALL LETTER A WITH MACRON
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\u012f'   #  0xE7 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0119'   #  0xEA -> LATIN SMALL LETTER E WITH OGONEK
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u0117'   #  0xEC -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf0'     #  0xF0 -> LATIN SMALL LETTER ETH (Icelandic)
+    '\u0146'   #  0xF1 -> LATIN SMALL LETTER N WITH CEDILLA
+    '\u014d'   #  0xF2 -> LATIN SMALL LETTER O WITH MACRON
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\u0169'   #  0xF7 -> LATIN SMALL LETTER U WITH TILDE
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\u0173'   #  0xF9 -> LATIN SMALL LETTER U WITH OGONEK
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0xFE -> LATIN SMALL LETTER THORN (Icelandic)
+    '\u0138'   #  0xFF -> LATIN SMALL LETTER KRA
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_11.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_11.py
new file mode 100644
index 0000000000000000000000000000000000000000..c7258ecf4640ef0940c990fdaf1608582b0fa0a4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_11.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_11 generated from 'MAPPINGS/ISO8859/8859-11.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-11',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0e01'   #  0xA1 -> THAI CHARACTER KO KAI
+    '\u0e02'   #  0xA2 -> THAI CHARACTER KHO KHAI
+    '\u0e03'   #  0xA3 -> THAI CHARACTER KHO KHUAT
+    '\u0e04'   #  0xA4 -> THAI CHARACTER KHO KHWAI
+    '\u0e05'   #  0xA5 -> THAI CHARACTER KHO KHON
+    '\u0e06'   #  0xA6 -> THAI CHARACTER KHO RAKHANG
+    '\u0e07'   #  0xA7 -> THAI CHARACTER NGO NGU
+    '\u0e08'   #  0xA8 -> THAI CHARACTER CHO CHAN
+    '\u0e09'   #  0xA9 -> THAI CHARACTER CHO CHING
+    '\u0e0a'   #  0xAA -> THAI CHARACTER CHO CHANG
+    '\u0e0b'   #  0xAB -> THAI CHARACTER SO SO
+    '\u0e0c'   #  0xAC -> THAI CHARACTER CHO CHOE
+    '\u0e0d'   #  0xAD -> THAI CHARACTER YO YING
+    '\u0e0e'   #  0xAE -> THAI CHARACTER DO CHADA
+    '\u0e0f'   #  0xAF -> THAI CHARACTER TO PATAK
+    '\u0e10'   #  0xB0 -> THAI CHARACTER THO THAN
+    '\u0e11'   #  0xB1 -> THAI CHARACTER THO NANGMONTHO
+    '\u0e12'   #  0xB2 -> THAI CHARACTER THO PHUTHAO
+    '\u0e13'   #  0xB3 -> THAI CHARACTER NO NEN
+    '\u0e14'   #  0xB4 -> THAI CHARACTER DO DEK
+    '\u0e15'   #  0xB5 -> THAI CHARACTER TO TAO
+    '\u0e16'   #  0xB6 -> THAI CHARACTER THO THUNG
+    '\u0e17'   #  0xB7 -> THAI CHARACTER THO THAHAN
+    '\u0e18'   #  0xB8 -> THAI CHARACTER THO THONG
+    '\u0e19'   #  0xB9 -> THAI CHARACTER NO NU
+    '\u0e1a'   #  0xBA -> THAI CHARACTER BO BAIMAI
+    '\u0e1b'   #  0xBB -> THAI CHARACTER PO PLA
+    '\u0e1c'   #  0xBC -> THAI CHARACTER PHO PHUNG
+    '\u0e1d'   #  0xBD -> THAI CHARACTER FO FA
+    '\u0e1e'   #  0xBE -> THAI CHARACTER PHO PHAN
+    '\u0e1f'   #  0xBF -> THAI CHARACTER FO FAN
+    '\u0e20'   #  0xC0 -> THAI CHARACTER PHO SAMPHAO
+    '\u0e21'   #  0xC1 -> THAI CHARACTER MO MA
+    '\u0e22'   #  0xC2 -> THAI CHARACTER YO YAK
+    '\u0e23'   #  0xC3 -> THAI CHARACTER RO RUA
+    '\u0e24'   #  0xC4 -> THAI CHARACTER RU
+    '\u0e25'   #  0xC5 -> THAI CHARACTER LO LING
+    '\u0e26'   #  0xC6 -> THAI CHARACTER LU
+    '\u0e27'   #  0xC7 -> THAI CHARACTER WO WAEN
+    '\u0e28'   #  0xC8 -> THAI CHARACTER SO SALA
+    '\u0e29'   #  0xC9 -> THAI CHARACTER SO RUSI
+    '\u0e2a'   #  0xCA -> THAI CHARACTER SO SUA
+    '\u0e2b'   #  0xCB -> THAI CHARACTER HO HIP
+    '\u0e2c'   #  0xCC -> THAI CHARACTER LO CHULA
+    '\u0e2d'   #  0xCD -> THAI CHARACTER O ANG
+    '\u0e2e'   #  0xCE -> THAI CHARACTER HO NOKHUK
+    '\u0e2f'   #  0xCF -> THAI CHARACTER PAIYANNOI
+    '\u0e30'   #  0xD0 -> THAI CHARACTER SARA A
+    '\u0e31'   #  0xD1 -> THAI CHARACTER MAI HAN-AKAT
+    '\u0e32'   #  0xD2 -> THAI CHARACTER SARA AA
+    '\u0e33'   #  0xD3 -> THAI CHARACTER SARA AM
+    '\u0e34'   #  0xD4 -> THAI CHARACTER SARA I
+    '\u0e35'   #  0xD5 -> THAI CHARACTER SARA II
+    '\u0e36'   #  0xD6 -> THAI CHARACTER SARA UE
+    '\u0e37'   #  0xD7 -> THAI CHARACTER SARA UEE
+    '\u0e38'   #  0xD8 -> THAI CHARACTER SARA U
+    '\u0e39'   #  0xD9 -> THAI CHARACTER SARA UU
+    '\u0e3a'   #  0xDA -> THAI CHARACTER PHINTHU
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u0e3f'   #  0xDF -> THAI CURRENCY SYMBOL BAHT
+    '\u0e40'   #  0xE0 -> THAI CHARACTER SARA E
+    '\u0e41'   #  0xE1 -> THAI CHARACTER SARA AE
+    '\u0e42'   #  0xE2 -> THAI CHARACTER SARA O
+    '\u0e43'   #  0xE3 -> THAI CHARACTER SARA AI MAIMUAN
+    '\u0e44'   #  0xE4 -> THAI CHARACTER SARA AI MAIMALAI
+    '\u0e45'   #  0xE5 -> THAI CHARACTER LAKKHANGYAO
+    '\u0e46'   #  0xE6 -> THAI CHARACTER MAIYAMOK
+    '\u0e47'   #  0xE7 -> THAI CHARACTER MAITAIKHU
+    '\u0e48'   #  0xE8 -> THAI CHARACTER MAI EK
+    '\u0e49'   #  0xE9 -> THAI CHARACTER MAI THO
+    '\u0e4a'   #  0xEA -> THAI CHARACTER MAI TRI
+    '\u0e4b'   #  0xEB -> THAI CHARACTER MAI CHATTAWA
+    '\u0e4c'   #  0xEC -> THAI CHARACTER THANTHAKHAT
+    '\u0e4d'   #  0xED -> THAI CHARACTER NIKHAHIT
+    '\u0e4e'   #  0xEE -> THAI CHARACTER YAMAKKAN
+    '\u0e4f'   #  0xEF -> THAI CHARACTER FONGMAN
+    '\u0e50'   #  0xF0 -> THAI DIGIT ZERO
+    '\u0e51'   #  0xF1 -> THAI DIGIT ONE
+    '\u0e52'   #  0xF2 -> THAI DIGIT TWO
+    '\u0e53'   #  0xF3 -> THAI DIGIT THREE
+    '\u0e54'   #  0xF4 -> THAI DIGIT FOUR
+    '\u0e55'   #  0xF5 -> THAI DIGIT FIVE
+    '\u0e56'   #  0xF6 -> THAI DIGIT SIX
+    '\u0e57'   #  0xF7 -> THAI DIGIT SEVEN
+    '\u0e58'   #  0xF8 -> THAI DIGIT EIGHT
+    '\u0e59'   #  0xF9 -> THAI DIGIT NINE
+    '\u0e5a'   #  0xFA -> THAI CHARACTER ANGKHANKHU
+    '\u0e5b'   #  0xFB -> THAI CHARACTER KHOMUT
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_13.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_13.py
new file mode 100644
index 0000000000000000000000000000000000000000..6f8eab2b821481b9ab33398a4219e54b5fe1445b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_13.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_13 generated from 'MAPPINGS/ISO8859/8859-13.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-13',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u201d'   #  0xA1 -> RIGHT DOUBLE QUOTATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u201e'   #  0xA5 -> DOUBLE LOW-9 QUOTATION MARK
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xd8'     #  0xA8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u0156'   #  0xAA -> LATIN CAPITAL LETTER R WITH CEDILLA
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xc6'     #  0xAF -> LATIN CAPITAL LETTER AE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\u201c'   #  0xB4 -> LEFT DOUBLE QUOTATION MARK
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xf8'     #  0xB8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\u0157'   #  0xBA -> LATIN SMALL LETTER R WITH CEDILLA
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xe6'     #  0xBF -> LATIN SMALL LETTER AE
+    '\u0104'   #  0xC0 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u012e'   #  0xC1 -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u0100'   #  0xC2 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\u0106'   #  0xC3 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\u0118'   #  0xC6 -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\u0112'   #  0xC7 -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0179'   #  0xCA -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\u0116'   #  0xCB -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\u0122'   #  0xCC -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\u0136'   #  0xCD -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\u012a'   #  0xCE -> LATIN CAPITAL LETTER I WITH MACRON
+    '\u013b'   #  0xCF -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\u0160'   #  0xD0 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0143'   #  0xD1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\u0145'   #  0xD2 -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\u014c'   #  0xD4 -> LATIN CAPITAL LETTER O WITH MACRON
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u0172'   #  0xD8 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\u0141'   #  0xD9 -> LATIN CAPITAL LETTER L WITH STROKE
+    '\u015a'   #  0xDA -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u016a'   #  0xDB -> LATIN CAPITAL LETTER U WITH MACRON
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u017b'   #  0xDD -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\u017d'   #  0xDE -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S (German)
+    '\u0105'   #  0xE0 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u012f'   #  0xE1 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u0101'   #  0xE2 -> LATIN SMALL LETTER A WITH MACRON
+    '\u0107'   #  0xE3 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\u0119'   #  0xE6 -> LATIN SMALL LETTER E WITH OGONEK
+    '\u0113'   #  0xE7 -> LATIN SMALL LETTER E WITH MACRON
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u017a'   #  0xEA -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u0117'   #  0xEB -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\u0123'   #  0xEC -> LATIN SMALL LETTER G WITH CEDILLA
+    '\u0137'   #  0xED -> LATIN SMALL LETTER K WITH CEDILLA
+    '\u012b'   #  0xEE -> LATIN SMALL LETTER I WITH MACRON
+    '\u013c'   #  0xEF -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u0161'   #  0xF0 -> LATIN SMALL LETTER S WITH CARON
+    '\u0144'   #  0xF1 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0146'   #  0xF2 -> LATIN SMALL LETTER N WITH CEDILLA
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\u014d'   #  0xF4 -> LATIN SMALL LETTER O WITH MACRON
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u0173'   #  0xF8 -> LATIN SMALL LETTER U WITH OGONEK
+    '\u0142'   #  0xF9 -> LATIN SMALL LETTER L WITH STROKE
+    '\u015b'   #  0xFA -> LATIN SMALL LETTER S WITH ACUTE
+    '\u016b'   #  0xFB -> LATIN SMALL LETTER U WITH MACRON
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u017c'   #  0xFD -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u017e'   #  0xFE -> LATIN SMALL LETTER Z WITH CARON
+    '\u2019'   #  0xFF -> RIGHT SINGLE QUOTATION MARK
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_14.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_14.py
new file mode 100644
index 0000000000000000000000000000000000000000..7568d4ee1f0448fda1a5f78aced1bbd568c56c8a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_14.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_14 generated from 'MAPPINGS/ISO8859/8859-14.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-14',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u1e02'   #  0xA1 -> LATIN CAPITAL LETTER B WITH DOT ABOVE
+    '\u1e03'   #  0xA2 -> LATIN SMALL LETTER B WITH DOT ABOVE
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\u010a'   #  0xA4 -> LATIN CAPITAL LETTER C WITH DOT ABOVE
+    '\u010b'   #  0xA5 -> LATIN SMALL LETTER C WITH DOT ABOVE
+    '\u1e0a'   #  0xA6 -> LATIN CAPITAL LETTER D WITH DOT ABOVE
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u1e80'   #  0xA8 -> LATIN CAPITAL LETTER W WITH GRAVE
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u1e82'   #  0xAA -> LATIN CAPITAL LETTER W WITH ACUTE
+    '\u1e0b'   #  0xAB -> LATIN SMALL LETTER D WITH DOT ABOVE
+    '\u1ef2'   #  0xAC -> LATIN CAPITAL LETTER Y WITH GRAVE
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\u0178'   #  0xAF -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u1e1e'   #  0xB0 -> LATIN CAPITAL LETTER F WITH DOT ABOVE
+    '\u1e1f'   #  0xB1 -> LATIN SMALL LETTER F WITH DOT ABOVE
+    '\u0120'   #  0xB2 -> LATIN CAPITAL LETTER G WITH DOT ABOVE
+    '\u0121'   #  0xB3 -> LATIN SMALL LETTER G WITH DOT ABOVE
+    '\u1e40'   #  0xB4 -> LATIN CAPITAL LETTER M WITH DOT ABOVE
+    '\u1e41'   #  0xB5 -> LATIN SMALL LETTER M WITH DOT ABOVE
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\u1e56'   #  0xB7 -> LATIN CAPITAL LETTER P WITH DOT ABOVE
+    '\u1e81'   #  0xB8 -> LATIN SMALL LETTER W WITH GRAVE
+    '\u1e57'   #  0xB9 -> LATIN SMALL LETTER P WITH DOT ABOVE
+    '\u1e83'   #  0xBA -> LATIN SMALL LETTER W WITH ACUTE
+    '\u1e60'   #  0xBB -> LATIN CAPITAL LETTER S WITH DOT ABOVE
+    '\u1ef3'   #  0xBC -> LATIN SMALL LETTER Y WITH GRAVE
+    '\u1e84'   #  0xBD -> LATIN CAPITAL LETTER W WITH DIAERESIS
+    '\u1e85'   #  0xBE -> LATIN SMALL LETTER W WITH DIAERESIS
+    '\u1e61'   #  0xBF -> LATIN SMALL LETTER S WITH DOT ABOVE
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u0174'   #  0xD0 -> LATIN CAPITAL LETTER W WITH CIRCUMFLEX
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\u1e6a'   #  0xD7 -> LATIN CAPITAL LETTER T WITH DOT ABOVE
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\u0176'   #  0xDE -> LATIN CAPITAL LETTER Y WITH CIRCUMFLEX
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u0175'   #  0xF0 -> LATIN SMALL LETTER W WITH CIRCUMFLEX
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\u1e6b'   #  0xF7 -> LATIN SMALL LETTER T WITH DOT ABOVE
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\u0177'   #  0xFE -> LATIN SMALL LETTER Y WITH CIRCUMFLEX
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_15.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_15.py
new file mode 100644
index 0000000000000000000000000000000000000000..43bdecd446841da1866749ca8c6ebb9d86c7795b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_15.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_15 generated from 'MAPPINGS/ISO8859/8859-15.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-15',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\u20ac'   #  0xA4 -> EURO SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\u0160'   #  0xA6 -> LATIN CAPITAL LETTER S WITH CARON
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u0161'   #  0xA8 -> LATIN SMALL LETTER S WITH CARON
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\u017d'   #  0xB4 -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u017e'   #  0xB8 -> LATIN SMALL LETTER Z WITH CARON
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u0152'   #  0xBC -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xBD -> LATIN SMALL LIGATURE OE
+    '\u0178'   #  0xBE -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xd0'     #  0xD0 -> LATIN CAPITAL LETTER ETH
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf0'     #  0xF0 -> LATIN SMALL LETTER ETH
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0xFE -> LATIN SMALL LETTER THORN
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_16.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_16.py
new file mode 100644
index 0000000000000000000000000000000000000000..e70c96e3335fb8357c34476758024cd9bd1ad8a1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_16.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_16 generated from 'MAPPINGS/ISO8859/8859-16.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-16',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0104'   #  0xA1 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u0105'   #  0xA2 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u0141'   #  0xA3 -> LATIN CAPITAL LETTER L WITH STROKE
+    '\u20ac'   #  0xA4 -> EURO SIGN
+    '\u201e'   #  0xA5 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u0160'   #  0xA6 -> LATIN CAPITAL LETTER S WITH CARON
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u0161'   #  0xA8 -> LATIN SMALL LETTER S WITH CARON
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u0218'   #  0xAA -> LATIN CAPITAL LETTER S WITH COMMA BELOW
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u0179'   #  0xAC -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u017a'   #  0xAE -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u017b'   #  0xAF -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u010c'   #  0xB2 -> LATIN CAPITAL LETTER C WITH CARON
+    '\u0142'   #  0xB3 -> LATIN SMALL LETTER L WITH STROKE
+    '\u017d'   #  0xB4 -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u201d'   #  0xB5 -> RIGHT DOUBLE QUOTATION MARK
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u017e'   #  0xB8 -> LATIN SMALL LETTER Z WITH CARON
+    '\u010d'   #  0xB9 -> LATIN SMALL LETTER C WITH CARON
+    '\u0219'   #  0xBA -> LATIN SMALL LETTER S WITH COMMA BELOW
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u0152'   #  0xBC -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xBD -> LATIN SMALL LIGATURE OE
+    '\u0178'   #  0xBE -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u017c'   #  0xBF -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u0102'   #  0xC3 -> LATIN CAPITAL LETTER A WITH BREVE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u0106'   #  0xC5 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u0143'   #  0xD1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0150'   #  0xD5 -> LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\u015a'   #  0xD7 -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u0170'   #  0xD8 -> LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0118'   #  0xDD -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\u021a'   #  0xDE -> LATIN CAPITAL LETTER T WITH COMMA BELOW
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\u0103'   #  0xE3 -> LATIN SMALL LETTER A WITH BREVE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u0107'   #  0xE5 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0144'   #  0xF1 -> LATIN SMALL LETTER N WITH ACUTE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u0151'   #  0xF5 -> LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\u015b'   #  0xF7 -> LATIN SMALL LETTER S WITH ACUTE
+    '\u0171'   #  0xF8 -> LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u0119'   #  0xFD -> LATIN SMALL LETTER E WITH OGONEK
+    '\u021b'   #  0xFE -> LATIN SMALL LETTER T WITH COMMA BELOW
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_2.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_2.py
new file mode 100644
index 0000000000000000000000000000000000000000..3698747b4794da2627a369313d93a2a31b55ea05
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_2.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_2 generated from 'MAPPINGS/ISO8859/8859-2.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-2',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0104'   #  0xA1 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u02d8'   #  0xA2 -> BREVE
+    '\u0141'   #  0xA3 -> LATIN CAPITAL LETTER L WITH STROKE
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u013d'   #  0xA5 -> LATIN CAPITAL LETTER L WITH CARON
+    '\u015a'   #  0xA6 -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\u0160'   #  0xA9 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u015e'   #  0xAA -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\u0164'   #  0xAB -> LATIN CAPITAL LETTER T WITH CARON
+    '\u0179'   #  0xAC -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u017d'   #  0xAE -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u017b'   #  0xAF -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\u0105'   #  0xB1 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u02db'   #  0xB2 -> OGONEK
+    '\u0142'   #  0xB3 -> LATIN SMALL LETTER L WITH STROKE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\u013e'   #  0xB5 -> LATIN SMALL LETTER L WITH CARON
+    '\u015b'   #  0xB6 -> LATIN SMALL LETTER S WITH ACUTE
+    '\u02c7'   #  0xB7 -> CARON
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\u0161'   #  0xB9 -> LATIN SMALL LETTER S WITH CARON
+    '\u015f'   #  0xBA -> LATIN SMALL LETTER S WITH CEDILLA
+    '\u0165'   #  0xBB -> LATIN SMALL LETTER T WITH CARON
+    '\u017a'   #  0xBC -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u02dd'   #  0xBD -> DOUBLE ACUTE ACCENT
+    '\u017e'   #  0xBE -> LATIN SMALL LETTER Z WITH CARON
+    '\u017c'   #  0xBF -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u0154'   #  0xC0 -> LATIN CAPITAL LETTER R WITH ACUTE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u0102'   #  0xC3 -> LATIN CAPITAL LETTER A WITH BREVE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u0139'   #  0xC5 -> LATIN CAPITAL LETTER L WITH ACUTE
+    '\u0106'   #  0xC6 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0118'   #  0xCA -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u011a'   #  0xCC -> LATIN CAPITAL LETTER E WITH CARON
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\u010e'   #  0xCF -> LATIN CAPITAL LETTER D WITH CARON
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u0143'   #  0xD1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\u0147'   #  0xD2 -> LATIN CAPITAL LETTER N WITH CARON
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0150'   #  0xD5 -> LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u0158'   #  0xD8 -> LATIN CAPITAL LETTER R WITH CARON
+    '\u016e'   #  0xD9 -> LATIN CAPITAL LETTER U WITH RING ABOVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\u0170'   #  0xDB -> LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\u0162'   #  0xDE -> LATIN CAPITAL LETTER T WITH CEDILLA
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\u0155'   #  0xE0 -> LATIN SMALL LETTER R WITH ACUTE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\u0103'   #  0xE3 -> LATIN SMALL LETTER A WITH BREVE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u013a'   #  0xE5 -> LATIN SMALL LETTER L WITH ACUTE
+    '\u0107'   #  0xE6 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0119'   #  0xEA -> LATIN SMALL LETTER E WITH OGONEK
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u011b'   #  0xEC -> LATIN SMALL LETTER E WITH CARON
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u010f'   #  0xEF -> LATIN SMALL LETTER D WITH CARON
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0144'   #  0xF1 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0148'   #  0xF2 -> LATIN SMALL LETTER N WITH CARON
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u0151'   #  0xF5 -> LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u0159'   #  0xF8 -> LATIN SMALL LETTER R WITH CARON
+    '\u016f'   #  0xF9 -> LATIN SMALL LETTER U WITH RING ABOVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\u0171'   #  0xFB -> LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\u0163'   #  0xFE -> LATIN SMALL LETTER T WITH CEDILLA
+    '\u02d9'   #  0xFF -> DOT ABOVE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_3.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_3.py
new file mode 100644
index 0000000000000000000000000000000000000000..96d3063ea68159c2ce73fcfbfa4895c5786930e7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_3.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_3 generated from 'MAPPINGS/ISO8859/8859-3.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-3',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0126'   #  0xA1 -> LATIN CAPITAL LETTER H WITH STROKE
+    '\u02d8'   #  0xA2 -> BREVE
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\ufffe'
+    '\u0124'   #  0xA6 -> LATIN CAPITAL LETTER H WITH CIRCUMFLEX
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\u0130'   #  0xA9 -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '\u015e'   #  0xAA -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\u011e'   #  0xAB -> LATIN CAPITAL LETTER G WITH BREVE
+    '\u0134'   #  0xAC -> LATIN CAPITAL LETTER J WITH CIRCUMFLEX
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\ufffe'
+    '\u017b'   #  0xAF -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\u0127'   #  0xB1 -> LATIN SMALL LETTER H WITH STROKE
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u0125'   #  0xB6 -> LATIN SMALL LETTER H WITH CIRCUMFLEX
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\u0131'   #  0xB9 -> LATIN SMALL LETTER DOTLESS I
+    '\u015f'   #  0xBA -> LATIN SMALL LETTER S WITH CEDILLA
+    '\u011f'   #  0xBB -> LATIN SMALL LETTER G WITH BREVE
+    '\u0135'   #  0xBC -> LATIN SMALL LETTER J WITH CIRCUMFLEX
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\ufffe'
+    '\u017c'   #  0xBF -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\ufffe'
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u010a'   #  0xC5 -> LATIN CAPITAL LETTER C WITH DOT ABOVE
+    '\u0108'   #  0xC6 -> LATIN CAPITAL LETTER C WITH CIRCUMFLEX
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\ufffe'
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0120'   #  0xD5 -> LATIN CAPITAL LETTER G WITH DOT ABOVE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\u011c'   #  0xD8 -> LATIN CAPITAL LETTER G WITH CIRCUMFLEX
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u016c'   #  0xDD -> LATIN CAPITAL LETTER U WITH BREVE
+    '\u015c'   #  0xDE -> LATIN CAPITAL LETTER S WITH CIRCUMFLEX
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\ufffe'
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u010b'   #  0xE5 -> LATIN SMALL LETTER C WITH DOT ABOVE
+    '\u0109'   #  0xE6 -> LATIN SMALL LETTER C WITH CIRCUMFLEX
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\ufffe'
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\u0121'   #  0xF5 -> LATIN SMALL LETTER G WITH DOT ABOVE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\u011d'   #  0xF8 -> LATIN SMALL LETTER G WITH CIRCUMFLEX
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u016d'   #  0xFD -> LATIN SMALL LETTER U WITH BREVE
+    '\u015d'   #  0xFE -> LATIN SMALL LETTER S WITH CIRCUMFLEX
+    '\u02d9'   #  0xFF -> DOT ABOVE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_4.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_4.py
new file mode 100644
index 0000000000000000000000000000000000000000..65c1e00f3067a3b044365085f006540e5d9eb969
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_4.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_4 generated from 'MAPPINGS/ISO8859/8859-4.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-4',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0104'   #  0xA1 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\u0138'   #  0xA2 -> LATIN SMALL LETTER KRA
+    '\u0156'   #  0xA3 -> LATIN CAPITAL LETTER R WITH CEDILLA
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u0128'   #  0xA5 -> LATIN CAPITAL LETTER I WITH TILDE
+    '\u013b'   #  0xA6 -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\u0160'   #  0xA9 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u0112'   #  0xAA -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u0122'   #  0xAB -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\u0166'   #  0xAC -> LATIN CAPITAL LETTER T WITH STROKE
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u017d'   #  0xAE -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\u0105'   #  0xB1 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u02db'   #  0xB2 -> OGONEK
+    '\u0157'   #  0xB3 -> LATIN SMALL LETTER R WITH CEDILLA
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\u0129'   #  0xB5 -> LATIN SMALL LETTER I WITH TILDE
+    '\u013c'   #  0xB6 -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u02c7'   #  0xB7 -> CARON
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\u0161'   #  0xB9 -> LATIN SMALL LETTER S WITH CARON
+    '\u0113'   #  0xBA -> LATIN SMALL LETTER E WITH MACRON
+    '\u0123'   #  0xBB -> LATIN SMALL LETTER G WITH CEDILLA
+    '\u0167'   #  0xBC -> LATIN SMALL LETTER T WITH STROKE
+    '\u014a'   #  0xBD -> LATIN CAPITAL LETTER ENG
+    '\u017e'   #  0xBE -> LATIN SMALL LETTER Z WITH CARON
+    '\u014b'   #  0xBF -> LATIN SMALL LETTER ENG
+    '\u0100'   #  0xC0 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\u012e'   #  0xC7 -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0118'   #  0xCA -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u0116'   #  0xCC -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\u012a'   #  0xCF -> LATIN CAPITAL LETTER I WITH MACRON
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u0145'   #  0xD1 -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\u014c'   #  0xD2 -> LATIN CAPITAL LETTER O WITH MACRON
+    '\u0136'   #  0xD3 -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u0172'   #  0xD9 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0168'   #  0xDD -> LATIN CAPITAL LETTER U WITH TILDE
+    '\u016a'   #  0xDE -> LATIN CAPITAL LETTER U WITH MACRON
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\u0101'   #  0xE0 -> LATIN SMALL LETTER A WITH MACRON
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\u012f'   #  0xE7 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0119'   #  0xEA -> LATIN SMALL LETTER E WITH OGONEK
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\u0117'   #  0xEC -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\u012b'   #  0xEF -> LATIN SMALL LETTER I WITH MACRON
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\u0146'   #  0xF1 -> LATIN SMALL LETTER N WITH CEDILLA
+    '\u014d'   #  0xF2 -> LATIN SMALL LETTER O WITH MACRON
+    '\u0137'   #  0xF3 -> LATIN SMALL LETTER K WITH CEDILLA
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\u0173'   #  0xF9 -> LATIN SMALL LETTER U WITH OGONEK
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u0169'   #  0xFD -> LATIN SMALL LETTER U WITH TILDE
+    '\u016b'   #  0xFE -> LATIN SMALL LETTER U WITH MACRON
+    '\u02d9'   #  0xFF -> DOT ABOVE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_5.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_5.py
new file mode 100644
index 0000000000000000000000000000000000000000..a3c868a50c5d0cd82d53c9e6ef20dd52146a00ad
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_5.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_5 generated from 'MAPPINGS/ISO8859/8859-5.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-5',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u0401'   #  0xA1 -> CYRILLIC CAPITAL LETTER IO
+    '\u0402'   #  0xA2 -> CYRILLIC CAPITAL LETTER DJE
+    '\u0403'   #  0xA3 -> CYRILLIC CAPITAL LETTER GJE
+    '\u0404'   #  0xA4 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u0405'   #  0xA5 -> CYRILLIC CAPITAL LETTER DZE
+    '\u0406'   #  0xA6 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0407'   #  0xA7 -> CYRILLIC CAPITAL LETTER YI
+    '\u0408'   #  0xA8 -> CYRILLIC CAPITAL LETTER JE
+    '\u0409'   #  0xA9 -> CYRILLIC CAPITAL LETTER LJE
+    '\u040a'   #  0xAA -> CYRILLIC CAPITAL LETTER NJE
+    '\u040b'   #  0xAB -> CYRILLIC CAPITAL LETTER TSHE
+    '\u040c'   #  0xAC -> CYRILLIC CAPITAL LETTER KJE
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\u040e'   #  0xAE -> CYRILLIC CAPITAL LETTER SHORT U
+    '\u040f'   #  0xAF -> CYRILLIC CAPITAL LETTER DZHE
+    '\u0410'   #  0xB0 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xB1 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0xB2 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0xB3 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0xB4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xB5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0xB6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0xB7 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0xB8 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xB9 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xBA -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xBB -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xBC -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xBD -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xBE -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xBF -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0xC0 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xC1 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xC2 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xC3 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0xC4 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0xC5 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0xC6 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0xC7 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0xC8 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0xC9 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0xCA -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0xCB -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0xCC -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0xCD -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0xCE -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0xCF -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'   #  0xD0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xD1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0xD2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0xD3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0xD4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xD5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0xD6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0xD7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0xD8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xD9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xDA -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xDB -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xDC -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xDD -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xDE -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xDF -> CYRILLIC SMALL LETTER PE
+    '\u0440'   #  0xE0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xE1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xE2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xE3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0xE4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0xE5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0xE6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0xE7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0xE8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0xE9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0xEA -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0xEB -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0xEC -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0xED -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0xEE -> CYRILLIC SMALL LETTER YU
+    '\u044f'   #  0xEF -> CYRILLIC SMALL LETTER YA
+    '\u2116'   #  0xF0 -> NUMERO SIGN
+    '\u0451'   #  0xF1 -> CYRILLIC SMALL LETTER IO
+    '\u0452'   #  0xF2 -> CYRILLIC SMALL LETTER DJE
+    '\u0453'   #  0xF3 -> CYRILLIC SMALL LETTER GJE
+    '\u0454'   #  0xF4 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u0455'   #  0xF5 -> CYRILLIC SMALL LETTER DZE
+    '\u0456'   #  0xF6 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0457'   #  0xF7 -> CYRILLIC SMALL LETTER YI
+    '\u0458'   #  0xF8 -> CYRILLIC SMALL LETTER JE
+    '\u0459'   #  0xF9 -> CYRILLIC SMALL LETTER LJE
+    '\u045a'   #  0xFA -> CYRILLIC SMALL LETTER NJE
+    '\u045b'   #  0xFB -> CYRILLIC SMALL LETTER TSHE
+    '\u045c'   #  0xFC -> CYRILLIC SMALL LETTER KJE
+    '\xa7'     #  0xFD -> SECTION SIGN
+    '\u045e'   #  0xFE -> CYRILLIC SMALL LETTER SHORT U
+    '\u045f'   #  0xFF -> CYRILLIC SMALL LETTER DZHE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_6.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_6.py
new file mode 100644
index 0000000000000000000000000000000000000000..b02ade6eaf4e13771ce952c868191d4d693f5c9a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_6.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_6 generated from 'MAPPINGS/ISO8859/8859-6.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-6',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u060c'   #  0xAC -> ARABIC COMMA
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u061b'   #  0xBB -> ARABIC SEMICOLON
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u061f'   #  0xBF -> ARABIC QUESTION MARK
+    '\ufffe'
+    '\u0621'   #  0xC1 -> ARABIC LETTER HAMZA
+    '\u0622'   #  0xC2 -> ARABIC LETTER ALEF WITH MADDA ABOVE
+    '\u0623'   #  0xC3 -> ARABIC LETTER ALEF WITH HAMZA ABOVE
+    '\u0624'   #  0xC4 -> ARABIC LETTER WAW WITH HAMZA ABOVE
+    '\u0625'   #  0xC5 -> ARABIC LETTER ALEF WITH HAMZA BELOW
+    '\u0626'   #  0xC6 -> ARABIC LETTER YEH WITH HAMZA ABOVE
+    '\u0627'   #  0xC7 -> ARABIC LETTER ALEF
+    '\u0628'   #  0xC8 -> ARABIC LETTER BEH
+    '\u0629'   #  0xC9 -> ARABIC LETTER TEH MARBUTA
+    '\u062a'   #  0xCA -> ARABIC LETTER TEH
+    '\u062b'   #  0xCB -> ARABIC LETTER THEH
+    '\u062c'   #  0xCC -> ARABIC LETTER JEEM
+    '\u062d'   #  0xCD -> ARABIC LETTER HAH
+    '\u062e'   #  0xCE -> ARABIC LETTER KHAH
+    '\u062f'   #  0xCF -> ARABIC LETTER DAL
+    '\u0630'   #  0xD0 -> ARABIC LETTER THAL
+    '\u0631'   #  0xD1 -> ARABIC LETTER REH
+    '\u0632'   #  0xD2 -> ARABIC LETTER ZAIN
+    '\u0633'   #  0xD3 -> ARABIC LETTER SEEN
+    '\u0634'   #  0xD4 -> ARABIC LETTER SHEEN
+    '\u0635'   #  0xD5 -> ARABIC LETTER SAD
+    '\u0636'   #  0xD6 -> ARABIC LETTER DAD
+    '\u0637'   #  0xD7 -> ARABIC LETTER TAH
+    '\u0638'   #  0xD8 -> ARABIC LETTER ZAH
+    '\u0639'   #  0xD9 -> ARABIC LETTER AIN
+    '\u063a'   #  0xDA -> ARABIC LETTER GHAIN
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u0640'   #  0xE0 -> ARABIC TATWEEL
+    '\u0641'   #  0xE1 -> ARABIC LETTER FEH
+    '\u0642'   #  0xE2 -> ARABIC LETTER QAF
+    '\u0643'   #  0xE3 -> ARABIC LETTER KAF
+    '\u0644'   #  0xE4 -> ARABIC LETTER LAM
+    '\u0645'   #  0xE5 -> ARABIC LETTER MEEM
+    '\u0646'   #  0xE6 -> ARABIC LETTER NOON
+    '\u0647'   #  0xE7 -> ARABIC LETTER HEH
+    '\u0648'   #  0xE8 -> ARABIC LETTER WAW
+    '\u0649'   #  0xE9 -> ARABIC LETTER ALEF MAKSURA
+    '\u064a'   #  0xEA -> ARABIC LETTER YEH
+    '\u064b'   #  0xEB -> ARABIC FATHATAN
+    '\u064c'   #  0xEC -> ARABIC DAMMATAN
+    '\u064d'   #  0xED -> ARABIC KASRATAN
+    '\u064e'   #  0xEE -> ARABIC FATHA
+    '\u064f'   #  0xEF -> ARABIC DAMMA
+    '\u0650'   #  0xF0 -> ARABIC KASRA
+    '\u0651'   #  0xF1 -> ARABIC SHADDA
+    '\u0652'   #  0xF2 -> ARABIC SUKUN
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_7.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_7.py
new file mode 100644
index 0000000000000000000000000000000000000000..d7b39cbc3a70ed6618114ef001db85379596f2be
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_7.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_7 generated from 'MAPPINGS/ISO8859/8859-7.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-7',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u2018'   #  0xA1 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xA2 -> RIGHT SINGLE QUOTATION MARK
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\u20ac'   #  0xA4 -> EURO SIGN
+    '\u20af'   #  0xA5 -> DRACHMA SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u037a'   #  0xAA -> GREEK YPOGEGRAMMENI
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\ufffe'
+    '\u2015'   #  0xAF -> HORIZONTAL BAR
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\u0384'   #  0xB4 -> GREEK TONOS
+    '\u0385'   #  0xB5 -> GREEK DIALYTIKA TONOS
+    '\u0386'   #  0xB6 -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u0388'   #  0xB8 -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u0389'   #  0xB9 -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\u038a'   #  0xBA -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u038c'   #  0xBC -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\u038e'   #  0xBE -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u038f'   #  0xBF -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '\u0390'   #  0xC0 -> GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    '\u0391'   #  0xC1 -> GREEK CAPITAL LETTER ALPHA
+    '\u0392'   #  0xC2 -> GREEK CAPITAL LETTER BETA
+    '\u0393'   #  0xC3 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0xC4 -> GREEK CAPITAL LETTER DELTA
+    '\u0395'   #  0xC5 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0xC6 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0xC7 -> GREEK CAPITAL LETTER ETA
+    '\u0398'   #  0xC8 -> GREEK CAPITAL LETTER THETA
+    '\u0399'   #  0xC9 -> GREEK CAPITAL LETTER IOTA
+    '\u039a'   #  0xCA -> GREEK CAPITAL LETTER KAPPA
+    '\u039b'   #  0xCB -> GREEK CAPITAL LETTER LAMDA
+    '\u039c'   #  0xCC -> GREEK CAPITAL LETTER MU
+    '\u039d'   #  0xCD -> GREEK CAPITAL LETTER NU
+    '\u039e'   #  0xCE -> GREEK CAPITAL LETTER XI
+    '\u039f'   #  0xCF -> GREEK CAPITAL LETTER OMICRON
+    '\u03a0'   #  0xD0 -> GREEK CAPITAL LETTER PI
+    '\u03a1'   #  0xD1 -> GREEK CAPITAL LETTER RHO
+    '\ufffe'
+    '\u03a3'   #  0xD3 -> GREEK CAPITAL LETTER SIGMA
+    '\u03a4'   #  0xD4 -> GREEK CAPITAL LETTER TAU
+    '\u03a5'   #  0xD5 -> GREEK CAPITAL LETTER UPSILON
+    '\u03a6'   #  0xD6 -> GREEK CAPITAL LETTER PHI
+    '\u03a7'   #  0xD7 -> GREEK CAPITAL LETTER CHI
+    '\u03a8'   #  0xD8 -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0xD9 -> GREEK CAPITAL LETTER OMEGA
+    '\u03aa'   #  0xDA -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\u03ab'   #  0xDB -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '\u03ac'   #  0xDC -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\u03ad'   #  0xDD -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0xDE -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03af'   #  0xDF -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03b0'   #  0xE0 -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    '\u03b1'   #  0xE1 -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0xE2 -> GREEK SMALL LETTER BETA
+    '\u03b3'   #  0xE3 -> GREEK SMALL LETTER GAMMA
+    '\u03b4'   #  0xE4 -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0xE5 -> GREEK SMALL LETTER EPSILON
+    '\u03b6'   #  0xE6 -> GREEK SMALL LETTER ZETA
+    '\u03b7'   #  0xE7 -> GREEK SMALL LETTER ETA
+    '\u03b8'   #  0xE8 -> GREEK SMALL LETTER THETA
+    '\u03b9'   #  0xE9 -> GREEK SMALL LETTER IOTA
+    '\u03ba'   #  0xEA -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0xEB -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0xEC -> GREEK SMALL LETTER MU
+    '\u03bd'   #  0xED -> GREEK SMALL LETTER NU
+    '\u03be'   #  0xEE -> GREEK SMALL LETTER XI
+    '\u03bf'   #  0xEF -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0xF0 -> GREEK SMALL LETTER PI
+    '\u03c1'   #  0xF1 -> GREEK SMALL LETTER RHO
+    '\u03c2'   #  0xF2 -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c3'   #  0xF3 -> GREEK SMALL LETTER SIGMA
+    '\u03c4'   #  0xF4 -> GREEK SMALL LETTER TAU
+    '\u03c5'   #  0xF5 -> GREEK SMALL LETTER UPSILON
+    '\u03c6'   #  0xF6 -> GREEK SMALL LETTER PHI
+    '\u03c7'   #  0xF7 -> GREEK SMALL LETTER CHI
+    '\u03c8'   #  0xF8 -> GREEK SMALL LETTER PSI
+    '\u03c9'   #  0xF9 -> GREEK SMALL LETTER OMEGA
+    '\u03ca'   #  0xFA -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u03cb'   #  0xFB -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u03cc'   #  0xFC -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u03cd'   #  0xFD -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u03ce'   #  0xFE -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_8.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_8.py
new file mode 100644
index 0000000000000000000000000000000000000000..81849027388d6d350a6115745fede8ef766dd29b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_8.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_8 generated from 'MAPPINGS/ISO8859/8859-8.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-8',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\ufffe'
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xd7'     #  0xAA -> MULTIPLICATION SIGN
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xf7'     #  0xBA -> DIVISION SIGN
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u2017'   #  0xDF -> DOUBLE LOW LINE
+    '\u05d0'   #  0xE0 -> HEBREW LETTER ALEF
+    '\u05d1'   #  0xE1 -> HEBREW LETTER BET
+    '\u05d2'   #  0xE2 -> HEBREW LETTER GIMEL
+    '\u05d3'   #  0xE3 -> HEBREW LETTER DALET
+    '\u05d4'   #  0xE4 -> HEBREW LETTER HE
+    '\u05d5'   #  0xE5 -> HEBREW LETTER VAV
+    '\u05d6'   #  0xE6 -> HEBREW LETTER ZAYIN
+    '\u05d7'   #  0xE7 -> HEBREW LETTER HET
+    '\u05d8'   #  0xE8 -> HEBREW LETTER TET
+    '\u05d9'   #  0xE9 -> HEBREW LETTER YOD
+    '\u05da'   #  0xEA -> HEBREW LETTER FINAL KAF
+    '\u05db'   #  0xEB -> HEBREW LETTER KAF
+    '\u05dc'   #  0xEC -> HEBREW LETTER LAMED
+    '\u05dd'   #  0xED -> HEBREW LETTER FINAL MEM
+    '\u05de'   #  0xEE -> HEBREW LETTER MEM
+    '\u05df'   #  0xEF -> HEBREW LETTER FINAL NUN
+    '\u05e0'   #  0xF0 -> HEBREW LETTER NUN
+    '\u05e1'   #  0xF1 -> HEBREW LETTER SAMEKH
+    '\u05e2'   #  0xF2 -> HEBREW LETTER AYIN
+    '\u05e3'   #  0xF3 -> HEBREW LETTER FINAL PE
+    '\u05e4'   #  0xF4 -> HEBREW LETTER PE
+    '\u05e5'   #  0xF5 -> HEBREW LETTER FINAL TSADI
+    '\u05e6'   #  0xF6 -> HEBREW LETTER TSADI
+    '\u05e7'   #  0xF7 -> HEBREW LETTER QOF
+    '\u05e8'   #  0xF8 -> HEBREW LETTER RESH
+    '\u05e9'   #  0xF9 -> HEBREW LETTER SHIN
+    '\u05ea'   #  0xFA -> HEBREW LETTER TAV
+    '\ufffe'
+    '\ufffe'
+    '\u200e'   #  0xFD -> LEFT-TO-RIGHT MARK
+    '\u200f'   #  0xFE -> RIGHT-TO-LEFT MARK
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_9.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_9.py
new file mode 100644
index 0000000000000000000000000000000000000000..e539fddac6c9b1059de1b7aff69e7028a6277897
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/iso8859_9.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec iso8859_9 generated from 'MAPPINGS/ISO8859/8859-9.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-9',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\u011e'   #  0xD0 -> LATIN CAPITAL LETTER G WITH BREVE
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0130'   #  0xDD -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '\u015e'   #  0xDE -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u011f'   #  0xF0 -> LATIN SMALL LETTER G WITH BREVE
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u0131'   #  0xFD -> LATIN SMALL LETTER DOTLESS I
+    '\u015f'   #  0xFE -> LATIN SMALL LETTER S WITH CEDILLA
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/johab.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/johab.py
new file mode 100644
index 0000000000000000000000000000000000000000..512aeeb732b5221ba35585a97e3cc1b85d3c5b02
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/johab.py
@@ -0,0 +1,39 @@
+#
+# johab.py: Python Unicode Codec for JOHAB
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_kr, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_kr.getcodec('johab')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='johab',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_r.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_r.py
new file mode 100644
index 0000000000000000000000000000000000000000..41ddde856e684341d3038f2a87939b668549b60b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_r.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec koi8_r generated from 'MAPPINGS/VENDORS/MISC/KOI8-R.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='koi8-r',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u2500'   #  0x80 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u2502'   #  0x81 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u250c'   #  0x82 -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2510'   #  0x83 -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x84 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2518'   #  0x85 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u251c'   #  0x86 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2524'   #  0x87 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u252c'   #  0x88 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u2534'   #  0x89 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u253c'   #  0x8A -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u2580'   #  0x8B -> UPPER HALF BLOCK
+    '\u2584'   #  0x8C -> LOWER HALF BLOCK
+    '\u2588'   #  0x8D -> FULL BLOCK
+    '\u258c'   #  0x8E -> LEFT HALF BLOCK
+    '\u2590'   #  0x8F -> RIGHT HALF BLOCK
+    '\u2591'   #  0x90 -> LIGHT SHADE
+    '\u2592'   #  0x91 -> MEDIUM SHADE
+    '\u2593'   #  0x92 -> DARK SHADE
+    '\u2320'   #  0x93 -> TOP HALF INTEGRAL
+    '\u25a0'   #  0x94 -> BLACK SQUARE
+    '\u2219'   #  0x95 -> BULLET OPERATOR
+    '\u221a'   #  0x96 -> SQUARE ROOT
+    '\u2248'   #  0x97 -> ALMOST EQUAL TO
+    '\u2264'   #  0x98 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0x99 -> GREATER-THAN OR EQUAL TO
+    '\xa0'     #  0x9A -> NO-BREAK SPACE
+    '\u2321'   #  0x9B -> BOTTOM HALF INTEGRAL
+    '\xb0'     #  0x9C -> DEGREE SIGN
+    '\xb2'     #  0x9D -> SUPERSCRIPT TWO
+    '\xb7'     #  0x9E -> MIDDLE DOT
+    '\xf7'     #  0x9F -> DIVISION SIGN
+    '\u2550'   #  0xA0 -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u2551'   #  0xA1 -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2552'   #  0xA2 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u0451'   #  0xA3 -> CYRILLIC SMALL LETTER IO
+    '\u2553'   #  0xA4 -> BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE
+    '\u2554'   #  0xA5 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u2555'   #  0xA6 -> BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE
+    '\u2556'   #  0xA7 -> BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE
+    '\u2557'   #  0xA8 -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u2558'   #  0xA9 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2559'   #  0xAA -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0xAB -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u255b'   #  0xAC -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u255c'   #  0xAD -> BOX DRAWINGS UP DOUBLE AND LEFT SINGLE
+    '\u255d'   #  0xAE -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255e'   #  0xAF -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0xB0 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u2560'   #  0xB1 -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2561'   #  0xB2 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u0401'   #  0xB3 -> CYRILLIC CAPITAL LETTER IO
+    '\u2562'   #  0xB4 -> BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE
+    '\u2563'   #  0xB5 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u2564'   #  0xB6 -> BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE
+    '\u2565'   #  0xB7 -> BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE
+    '\u2566'   #  0xB8 -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2567'   #  0xB9 -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0xBA -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2569'   #  0xBB -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u256a'   #  0xBC -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u256b'   #  0xBD -> BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE
+    '\u256c'   #  0xBE -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa9'     #  0xBF -> COPYRIGHT SIGN
+    '\u044e'   #  0xC0 -> CYRILLIC SMALL LETTER YU
+    '\u0430'   #  0xC1 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xC2 -> CYRILLIC SMALL LETTER BE
+    '\u0446'   #  0xC3 -> CYRILLIC SMALL LETTER TSE
+    '\u0434'   #  0xC4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xC5 -> CYRILLIC SMALL LETTER IE
+    '\u0444'   #  0xC6 -> CYRILLIC SMALL LETTER EF
+    '\u0433'   #  0xC7 -> CYRILLIC SMALL LETTER GHE
+    '\u0445'   #  0xC8 -> CYRILLIC SMALL LETTER HA
+    '\u0438'   #  0xC9 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xCA -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xCB -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xCC -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xCD -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xCE -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xCF -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xD0 -> CYRILLIC SMALL LETTER PE
+    '\u044f'   #  0xD1 -> CYRILLIC SMALL LETTER YA
+    '\u0440'   #  0xD2 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xD3 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xD4 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xD5 -> CYRILLIC SMALL LETTER U
+    '\u0436'   #  0xD6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0432'   #  0xD7 -> CYRILLIC SMALL LETTER VE
+    '\u044c'   #  0xD8 -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044b'   #  0xD9 -> CYRILLIC SMALL LETTER YERU
+    '\u0437'   #  0xDA -> CYRILLIC SMALL LETTER ZE
+    '\u0448'   #  0xDB -> CYRILLIC SMALL LETTER SHA
+    '\u044d'   #  0xDC -> CYRILLIC SMALL LETTER E
+    '\u0449'   #  0xDD -> CYRILLIC SMALL LETTER SHCHA
+    '\u0447'   #  0xDE -> CYRILLIC SMALL LETTER CHE
+    '\u044a'   #  0xDF -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u042e'   #  0xE0 -> CYRILLIC CAPITAL LETTER YU
+    '\u0410'   #  0xE1 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xE2 -> CYRILLIC CAPITAL LETTER BE
+    '\u0426'   #  0xE3 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0414'   #  0xE4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xE5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0424'   #  0xE6 -> CYRILLIC CAPITAL LETTER EF
+    '\u0413'   #  0xE7 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0425'   #  0xE8 -> CYRILLIC CAPITAL LETTER HA
+    '\u0418'   #  0xE9 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xEA -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xEB -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xEC -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xED -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xEE -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xEF -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xF0 -> CYRILLIC CAPITAL LETTER PE
+    '\u042f'   #  0xF1 -> CYRILLIC CAPITAL LETTER YA
+    '\u0420'   #  0xF2 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xF3 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xF4 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xF5 -> CYRILLIC CAPITAL LETTER U
+    '\u0416'   #  0xF6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0412'   #  0xF7 -> CYRILLIC CAPITAL LETTER VE
+    '\u042c'   #  0xF8 -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042b'   #  0xF9 -> CYRILLIC CAPITAL LETTER YERU
+    '\u0417'   #  0xFA -> CYRILLIC CAPITAL LETTER ZE
+    '\u0428'   #  0xFB -> CYRILLIC CAPITAL LETTER SHA
+    '\u042d'   #  0xFC -> CYRILLIC CAPITAL LETTER E
+    '\u0429'   #  0xFD -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u0427'   #  0xFE -> CYRILLIC CAPITAL LETTER CHE
+    '\u042a'   #  0xFF -> CYRILLIC CAPITAL LETTER HARD SIGN
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_t.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_t.py
new file mode 100644
index 0000000000000000000000000000000000000000..b5415ba366582bb3ea90dfef584357ba74fd442e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_t.py
@@ -0,0 +1,308 @@
+""" Python Character Mapping Codec koi8_t
+"""
+# http://ru.wikipedia.org/wiki/КОИ-8
+# http://www.opensource.apple.com/source/libiconv/libiconv-4/libiconv/tests/KOI8-T.TXT
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='koi8-t',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u049b'   #  0x80 -> CYRILLIC SMALL LETTER KA WITH DESCENDER
+    '\u0493'   #  0x81 -> CYRILLIC SMALL LETTER GHE WITH STROKE
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0492'   #  0x83 -> CYRILLIC CAPITAL LETTER GHE WITH STROKE
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\ufffe'   #  0x88 -> UNDEFINED
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u04b3'   #  0x8A -> CYRILLIC SMALL LETTER HA WITH DESCENDER
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u04b2'   #  0x8C -> CYRILLIC CAPITAL LETTER HA WITH DESCENDER
+    '\u04b7'   #  0x8D -> CYRILLIC SMALL LETTER CHE WITH DESCENDER
+    '\u04b6'   #  0x8E -> CYRILLIC CAPITAL LETTER CHE WITH DESCENDER
+    '\ufffe'   #  0x8F -> UNDEFINED
+    '\u049a'   #  0x90 -> CYRILLIC CAPITAL LETTER KA WITH DESCENDER
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\ufffe'   #  0x98 -> UNDEFINED
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\ufffe'   #  0x9A -> UNDEFINED
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\ufffe'   #  0x9C -> UNDEFINED
+    '\ufffe'   #  0x9D -> UNDEFINED
+    '\ufffe'   #  0x9E -> UNDEFINED
+    '\ufffe'   #  0x9F -> UNDEFINED
+    '\ufffe'   #  0xA0 -> UNDEFINED
+    '\u04ef'   #  0xA1 -> CYRILLIC SMALL LETTER U WITH MACRON
+    '\u04ee'   #  0xA2 -> CYRILLIC CAPITAL LETTER U WITH MACRON
+    '\u0451'   #  0xA3 -> CYRILLIC SMALL LETTER IO
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\u04e3'   #  0xA5 -> CYRILLIC SMALL LETTER I WITH MACRON
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\ufffe'   #  0xA8 -> UNDEFINED
+    '\ufffe'   #  0xA9 -> UNDEFINED
+    '\ufffe'   #  0xAA -> UNDEFINED
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\ufffe'   #  0xAF -> UNDEFINED
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\u0401'   #  0xB3 -> CYRILLIC CAPITAL LETTER IO
+    '\ufffe'   #  0xB4 -> UNDEFINED
+    '\u04e2'   #  0xB5 -> CYRILLIC CAPITAL LETTER I WITH MACRON
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\ufffe'   #  0xB8 -> UNDEFINED
+    '\u2116'   #  0xB9 -> NUMERO SIGN
+    '\ufffe'   #  0xBA -> UNDEFINED
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\ufffe'   #  0xBC -> UNDEFINED
+    '\ufffe'   #  0xBD -> UNDEFINED
+    '\ufffe'   #  0xBE -> UNDEFINED
+    '\xa9'     #  0xBF -> COPYRIGHT SIGN
+    '\u044e'   #  0xC0 -> CYRILLIC SMALL LETTER YU
+    '\u0430'   #  0xC1 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xC2 -> CYRILLIC SMALL LETTER BE
+    '\u0446'   #  0xC3 -> CYRILLIC SMALL LETTER TSE
+    '\u0434'   #  0xC4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xC5 -> CYRILLIC SMALL LETTER IE
+    '\u0444'   #  0xC6 -> CYRILLIC SMALL LETTER EF
+    '\u0433'   #  0xC7 -> CYRILLIC SMALL LETTER GHE
+    '\u0445'   #  0xC8 -> CYRILLIC SMALL LETTER HA
+    '\u0438'   #  0xC9 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xCA -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xCB -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xCC -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xCD -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xCE -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xCF -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xD0 -> CYRILLIC SMALL LETTER PE
+    '\u044f'   #  0xD1 -> CYRILLIC SMALL LETTER YA
+    '\u0440'   #  0xD2 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xD3 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xD4 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xD5 -> CYRILLIC SMALL LETTER U
+    '\u0436'   #  0xD6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0432'   #  0xD7 -> CYRILLIC SMALL LETTER VE
+    '\u044c'   #  0xD8 -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044b'   #  0xD9 -> CYRILLIC SMALL LETTER YERU
+    '\u0437'   #  0xDA -> CYRILLIC SMALL LETTER ZE
+    '\u0448'   #  0xDB -> CYRILLIC SMALL LETTER SHA
+    '\u044d'   #  0xDC -> CYRILLIC SMALL LETTER E
+    '\u0449'   #  0xDD -> CYRILLIC SMALL LETTER SHCHA
+    '\u0447'   #  0xDE -> CYRILLIC SMALL LETTER CHE
+    '\u044a'   #  0xDF -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u042e'   #  0xE0 -> CYRILLIC CAPITAL LETTER YU
+    '\u0410'   #  0xE1 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xE2 -> CYRILLIC CAPITAL LETTER BE
+    '\u0426'   #  0xE3 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0414'   #  0xE4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xE5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0424'   #  0xE6 -> CYRILLIC CAPITAL LETTER EF
+    '\u0413'   #  0xE7 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0425'   #  0xE8 -> CYRILLIC CAPITAL LETTER HA
+    '\u0418'   #  0xE9 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xEA -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xEB -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xEC -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xED -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xEE -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xEF -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xF0 -> CYRILLIC CAPITAL LETTER PE
+    '\u042f'   #  0xF1 -> CYRILLIC CAPITAL LETTER YA
+    '\u0420'   #  0xF2 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xF3 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xF4 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xF5 -> CYRILLIC CAPITAL LETTER U
+    '\u0416'   #  0xF6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0412'   #  0xF7 -> CYRILLIC CAPITAL LETTER VE
+    '\u042c'   #  0xF8 -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042b'   #  0xF9 -> CYRILLIC CAPITAL LETTER YERU
+    '\u0417'   #  0xFA -> CYRILLIC CAPITAL LETTER ZE
+    '\u0428'   #  0xFB -> CYRILLIC CAPITAL LETTER SHA
+    '\u042d'   #  0xFC -> CYRILLIC CAPITAL LETTER E
+    '\u0429'   #  0xFD -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u0427'   #  0xFE -> CYRILLIC CAPITAL LETTER CHE
+    '\u042a'   #  0xFF -> CYRILLIC CAPITAL LETTER HARD SIGN
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_u.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_u.py
new file mode 100644
index 0000000000000000000000000000000000000000..f9e3fae5fa2bf447bd03b5de10f260b5720511c5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/koi8_u.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec koi8_u generated from 'python-mappings/KOI8-U.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='koi8-u',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u2500'   #  0x80 -> BOX DRAWINGS LIGHT HORIZONTAL
+    '\u2502'   #  0x81 -> BOX DRAWINGS LIGHT VERTICAL
+    '\u250c'   #  0x82 -> BOX DRAWINGS LIGHT DOWN AND RIGHT
+    '\u2510'   #  0x83 -> BOX DRAWINGS LIGHT DOWN AND LEFT
+    '\u2514'   #  0x84 -> BOX DRAWINGS LIGHT UP AND RIGHT
+    '\u2518'   #  0x85 -> BOX DRAWINGS LIGHT UP AND LEFT
+    '\u251c'   #  0x86 -> BOX DRAWINGS LIGHT VERTICAL AND RIGHT
+    '\u2524'   #  0x87 -> BOX DRAWINGS LIGHT VERTICAL AND LEFT
+    '\u252c'   #  0x88 -> BOX DRAWINGS LIGHT DOWN AND HORIZONTAL
+    '\u2534'   #  0x89 -> BOX DRAWINGS LIGHT UP AND HORIZONTAL
+    '\u253c'   #  0x8A -> BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL
+    '\u2580'   #  0x8B -> UPPER HALF BLOCK
+    '\u2584'   #  0x8C -> LOWER HALF BLOCK
+    '\u2588'   #  0x8D -> FULL BLOCK
+    '\u258c'   #  0x8E -> LEFT HALF BLOCK
+    '\u2590'   #  0x8F -> RIGHT HALF BLOCK
+    '\u2591'   #  0x90 -> LIGHT SHADE
+    '\u2592'   #  0x91 -> MEDIUM SHADE
+    '\u2593'   #  0x92 -> DARK SHADE
+    '\u2320'   #  0x93 -> TOP HALF INTEGRAL
+    '\u25a0'   #  0x94 -> BLACK SQUARE
+    '\u2219'   #  0x95 -> BULLET OPERATOR
+    '\u221a'   #  0x96 -> SQUARE ROOT
+    '\u2248'   #  0x97 -> ALMOST EQUAL TO
+    '\u2264'   #  0x98 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0x99 -> GREATER-THAN OR EQUAL TO
+    '\xa0'     #  0x9A -> NO-BREAK SPACE
+    '\u2321'   #  0x9B -> BOTTOM HALF INTEGRAL
+    '\xb0'     #  0x9C -> DEGREE SIGN
+    '\xb2'     #  0x9D -> SUPERSCRIPT TWO
+    '\xb7'     #  0x9E -> MIDDLE DOT
+    '\xf7'     #  0x9F -> DIVISION SIGN
+    '\u2550'   #  0xA0 -> BOX DRAWINGS DOUBLE HORIZONTAL
+    '\u2551'   #  0xA1 -> BOX DRAWINGS DOUBLE VERTICAL
+    '\u2552'   #  0xA2 -> BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE
+    '\u0451'   #  0xA3 -> CYRILLIC SMALL LETTER IO
+    '\u0454'   #  0xA4 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u2554'   #  0xA5 -> BOX DRAWINGS DOUBLE DOWN AND RIGHT
+    '\u0456'   #  0xA6 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0457'   #  0xA7 -> CYRILLIC SMALL LETTER YI (UKRAINIAN)
+    '\u2557'   #  0xA8 -> BOX DRAWINGS DOUBLE DOWN AND LEFT
+    '\u2558'   #  0xA9 -> BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE
+    '\u2559'   #  0xAA -> BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE
+    '\u255a'   #  0xAB -> BOX DRAWINGS DOUBLE UP AND RIGHT
+    '\u255b'   #  0xAC -> BOX DRAWINGS UP SINGLE AND LEFT DOUBLE
+    '\u0491'   #  0xAD -> CYRILLIC SMALL LETTER UKRAINIAN GHE WITH UPTURN
+    '\u255d'   #  0xAE -> BOX DRAWINGS DOUBLE UP AND LEFT
+    '\u255e'   #  0xAF -> BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE
+    '\u255f'   #  0xB0 -> BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE
+    '\u2560'   #  0xB1 -> BOX DRAWINGS DOUBLE VERTICAL AND RIGHT
+    '\u2561'   #  0xB2 -> BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE
+    '\u0401'   #  0xB3 -> CYRILLIC CAPITAL LETTER IO
+    '\u0404'   #  0xB4 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u2563'   #  0xB5 -> BOX DRAWINGS DOUBLE VERTICAL AND LEFT
+    '\u0406'   #  0xB6 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0407'   #  0xB7 -> CYRILLIC CAPITAL LETTER YI (UKRAINIAN)
+    '\u2566'   #  0xB8 -> BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL
+    '\u2567'   #  0xB9 -> BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE
+    '\u2568'   #  0xBA -> BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE
+    '\u2569'   #  0xBB -> BOX DRAWINGS DOUBLE UP AND HORIZONTAL
+    '\u256a'   #  0xBC -> BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE
+    '\u0490'   #  0xBD -> CYRILLIC CAPITAL LETTER UKRAINIAN GHE WITH UPTURN
+    '\u256c'   #  0xBE -> BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL
+    '\xa9'     #  0xBF -> COPYRIGHT SIGN
+    '\u044e'   #  0xC0 -> CYRILLIC SMALL LETTER YU
+    '\u0430'   #  0xC1 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xC2 -> CYRILLIC SMALL LETTER BE
+    '\u0446'   #  0xC3 -> CYRILLIC SMALL LETTER TSE
+    '\u0434'   #  0xC4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xC5 -> CYRILLIC SMALL LETTER IE
+    '\u0444'   #  0xC6 -> CYRILLIC SMALL LETTER EF
+    '\u0433'   #  0xC7 -> CYRILLIC SMALL LETTER GHE
+    '\u0445'   #  0xC8 -> CYRILLIC SMALL LETTER HA
+    '\u0438'   #  0xC9 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xCA -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xCB -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xCC -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xCD -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xCE -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xCF -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xD0 -> CYRILLIC SMALL LETTER PE
+    '\u044f'   #  0xD1 -> CYRILLIC SMALL LETTER YA
+    '\u0440'   #  0xD2 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xD3 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xD4 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xD5 -> CYRILLIC SMALL LETTER U
+    '\u0436'   #  0xD6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0432'   #  0xD7 -> CYRILLIC SMALL LETTER VE
+    '\u044c'   #  0xD8 -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044b'   #  0xD9 -> CYRILLIC SMALL LETTER YERU
+    '\u0437'   #  0xDA -> CYRILLIC SMALL LETTER ZE
+    '\u0448'   #  0xDB -> CYRILLIC SMALL LETTER SHA
+    '\u044d'   #  0xDC -> CYRILLIC SMALL LETTER E
+    '\u0449'   #  0xDD -> CYRILLIC SMALL LETTER SHCHA
+    '\u0447'   #  0xDE -> CYRILLIC SMALL LETTER CHE
+    '\u044a'   #  0xDF -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u042e'   #  0xE0 -> CYRILLIC CAPITAL LETTER YU
+    '\u0410'   #  0xE1 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xE2 -> CYRILLIC CAPITAL LETTER BE
+    '\u0426'   #  0xE3 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0414'   #  0xE4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xE5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0424'   #  0xE6 -> CYRILLIC CAPITAL LETTER EF
+    '\u0413'   #  0xE7 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0425'   #  0xE8 -> CYRILLIC CAPITAL LETTER HA
+    '\u0418'   #  0xE9 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xEA -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xEB -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xEC -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xED -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xEE -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xEF -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xF0 -> CYRILLIC CAPITAL LETTER PE
+    '\u042f'   #  0xF1 -> CYRILLIC CAPITAL LETTER YA
+    '\u0420'   #  0xF2 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xF3 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xF4 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xF5 -> CYRILLIC CAPITAL LETTER U
+    '\u0416'   #  0xF6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0412'   #  0xF7 -> CYRILLIC CAPITAL LETTER VE
+    '\u042c'   #  0xF8 -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042b'   #  0xF9 -> CYRILLIC CAPITAL LETTER YERU
+    '\u0417'   #  0xFA -> CYRILLIC CAPITAL LETTER ZE
+    '\u0428'   #  0xFB -> CYRILLIC CAPITAL LETTER SHA
+    '\u042d'   #  0xFC -> CYRILLIC CAPITAL LETTER E
+    '\u0429'   #  0xFD -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u0427'   #  0xFE -> CYRILLIC CAPITAL LETTER CHE
+    '\u042a'   #  0xFF -> CYRILLIC CAPITAL LETTER HARD SIGN
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/kz1048.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/kz1048.py
new file mode 100644
index 0000000000000000000000000000000000000000..712aee6e93084760e88f729d42822c1ba5762e23
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/kz1048.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec kz1048 generated from 'MAPPINGS/VENDORS/MISC/KZ1048.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self, input, errors='strict'):
+        return codecs.charmap_encode(input, errors, encoding_table)
+
+    def decode(self, input, errors='strict'):
+        return codecs.charmap_decode(input, errors, decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input, self.errors, encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input, self.errors, decoding_table)[0]
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec, codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='kz1048',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'      #  0x00 -> NULL
+    '\x01'      #  0x01 -> START OF HEADING
+    '\x02'      #  0x02 -> START OF TEXT
+    '\x03'      #  0x03 -> END OF TEXT
+    '\x04'      #  0x04 -> END OF TRANSMISSION
+    '\x05'      #  0x05 -> ENQUIRY
+    '\x06'      #  0x06 -> ACKNOWLEDGE
+    '\x07'      #  0x07 -> BELL
+    '\x08'      #  0x08 -> BACKSPACE
+    '\t'        #  0x09 -> HORIZONTAL TABULATION
+    '\n'        #  0x0A -> LINE FEED
+    '\x0b'      #  0x0B -> VERTICAL TABULATION
+    '\x0c'      #  0x0C -> FORM FEED
+    '\r'        #  0x0D -> CARRIAGE RETURN
+    '\x0e'      #  0x0E -> SHIFT OUT
+    '\x0f'      #  0x0F -> SHIFT IN
+    '\x10'      #  0x10 -> DATA LINK ESCAPE
+    '\x11'      #  0x11 -> DEVICE CONTROL ONE
+    '\x12'      #  0x12 -> DEVICE CONTROL TWO
+    '\x13'      #  0x13 -> DEVICE CONTROL THREE
+    '\x14'      #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'      #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'      #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'      #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'      #  0x18 -> CANCEL
+    '\x19'      #  0x19 -> END OF MEDIUM
+    '\x1a'      #  0x1A -> SUBSTITUTE
+    '\x1b'      #  0x1B -> ESCAPE
+    '\x1c'      #  0x1C -> FILE SEPARATOR
+    '\x1d'      #  0x1D -> GROUP SEPARATOR
+    '\x1e'      #  0x1E -> RECORD SEPARATOR
+    '\x1f'      #  0x1F -> UNIT SEPARATOR
+    ' '         #  0x20 -> SPACE
+    '!'         #  0x21 -> EXCLAMATION MARK
+    '"'         #  0x22 -> QUOTATION MARK
+    '#'         #  0x23 -> NUMBER SIGN
+    '$'         #  0x24 -> DOLLAR SIGN
+    '%'         #  0x25 -> PERCENT SIGN
+    '&'         #  0x26 -> AMPERSAND
+    "'"         #  0x27 -> APOSTROPHE
+    '('         #  0x28 -> LEFT PARENTHESIS
+    ')'         #  0x29 -> RIGHT PARENTHESIS
+    '*'         #  0x2A -> ASTERISK
+    '+'         #  0x2B -> PLUS SIGN
+    ','         #  0x2C -> COMMA
+    '-'         #  0x2D -> HYPHEN-MINUS
+    '.'         #  0x2E -> FULL STOP
+    '/'         #  0x2F -> SOLIDUS
+    '0'         #  0x30 -> DIGIT ZERO
+    '1'         #  0x31 -> DIGIT ONE
+    '2'         #  0x32 -> DIGIT TWO
+    '3'         #  0x33 -> DIGIT THREE
+    '4'         #  0x34 -> DIGIT FOUR
+    '5'         #  0x35 -> DIGIT FIVE
+    '6'         #  0x36 -> DIGIT SIX
+    '7'         #  0x37 -> DIGIT SEVEN
+    '8'         #  0x38 -> DIGIT EIGHT
+    '9'         #  0x39 -> DIGIT NINE
+    ':'         #  0x3A -> COLON
+    ';'         #  0x3B -> SEMICOLON
+    '<'         #  0x3C -> LESS-THAN SIGN
+    '='         #  0x3D -> EQUALS SIGN
+    '>'         #  0x3E -> GREATER-THAN SIGN
+    '?'         #  0x3F -> QUESTION MARK
+    '@'         #  0x40 -> COMMERCIAL AT
+    'A'         #  0x41 -> LATIN CAPITAL LETTER A
+    'B'         #  0x42 -> LATIN CAPITAL LETTER B
+    'C'         #  0x43 -> LATIN CAPITAL LETTER C
+    'D'         #  0x44 -> LATIN CAPITAL LETTER D
+    'E'         #  0x45 -> LATIN CAPITAL LETTER E
+    'F'         #  0x46 -> LATIN CAPITAL LETTER F
+    'G'         #  0x47 -> LATIN CAPITAL LETTER G
+    'H'         #  0x48 -> LATIN CAPITAL LETTER H
+    'I'         #  0x49 -> LATIN CAPITAL LETTER I
+    'J'         #  0x4A -> LATIN CAPITAL LETTER J
+    'K'         #  0x4B -> LATIN CAPITAL LETTER K
+    'L'         #  0x4C -> LATIN CAPITAL LETTER L
+    'M'         #  0x4D -> LATIN CAPITAL LETTER M
+    'N'         #  0x4E -> LATIN CAPITAL LETTER N
+    'O'         #  0x4F -> LATIN CAPITAL LETTER O
+    'P'         #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'         #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'         #  0x52 -> LATIN CAPITAL LETTER R
+    'S'         #  0x53 -> LATIN CAPITAL LETTER S
+    'T'         #  0x54 -> LATIN CAPITAL LETTER T
+    'U'         #  0x55 -> LATIN CAPITAL LETTER U
+    'V'         #  0x56 -> LATIN CAPITAL LETTER V
+    'W'         #  0x57 -> LATIN CAPITAL LETTER W
+    'X'         #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'         #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'         #  0x5A -> LATIN CAPITAL LETTER Z
+    '['         #  0x5B -> LEFT SQUARE BRACKET
+    '\\'        #  0x5C -> REVERSE SOLIDUS
+    ']'         #  0x5D -> RIGHT SQUARE BRACKET
+    '^'         #  0x5E -> CIRCUMFLEX ACCENT
+    '_'         #  0x5F -> LOW LINE
+    '`'         #  0x60 -> GRAVE ACCENT
+    'a'         #  0x61 -> LATIN SMALL LETTER A
+    'b'         #  0x62 -> LATIN SMALL LETTER B
+    'c'         #  0x63 -> LATIN SMALL LETTER C
+    'd'         #  0x64 -> LATIN SMALL LETTER D
+    'e'         #  0x65 -> LATIN SMALL LETTER E
+    'f'         #  0x66 -> LATIN SMALL LETTER F
+    'g'         #  0x67 -> LATIN SMALL LETTER G
+    'h'         #  0x68 -> LATIN SMALL LETTER H
+    'i'         #  0x69 -> LATIN SMALL LETTER I
+    'j'         #  0x6A -> LATIN SMALL LETTER J
+    'k'         #  0x6B -> LATIN SMALL LETTER K
+    'l'         #  0x6C -> LATIN SMALL LETTER L
+    'm'         #  0x6D -> LATIN SMALL LETTER M
+    'n'         #  0x6E -> LATIN SMALL LETTER N
+    'o'         #  0x6F -> LATIN SMALL LETTER O
+    'p'         #  0x70 -> LATIN SMALL LETTER P
+    'q'         #  0x71 -> LATIN SMALL LETTER Q
+    'r'         #  0x72 -> LATIN SMALL LETTER R
+    's'         #  0x73 -> LATIN SMALL LETTER S
+    't'         #  0x74 -> LATIN SMALL LETTER T
+    'u'         #  0x75 -> LATIN SMALL LETTER U
+    'v'         #  0x76 -> LATIN SMALL LETTER V
+    'w'         #  0x77 -> LATIN SMALL LETTER W
+    'x'         #  0x78 -> LATIN SMALL LETTER X
+    'y'         #  0x79 -> LATIN SMALL LETTER Y
+    'z'         #  0x7A -> LATIN SMALL LETTER Z
+    '{'         #  0x7B -> LEFT CURLY BRACKET
+    '|'         #  0x7C -> VERTICAL LINE
+    '}'         #  0x7D -> RIGHT CURLY BRACKET
+    '~'         #  0x7E -> TILDE
+    '\x7f'      #  0x7F -> DELETE
+    '\u0402'    #  0x80 -> CYRILLIC CAPITAL LETTER DJE
+    '\u0403'    #  0x81 -> CYRILLIC CAPITAL LETTER GJE
+    '\u201a'    #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0453'    #  0x83 -> CYRILLIC SMALL LETTER GJE
+    '\u201e'    #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'    #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'    #  0x86 -> DAGGER
+    '\u2021'    #  0x87 -> DOUBLE DAGGER
+    '\u20ac'    #  0x88 -> EURO SIGN
+    '\u2030'    #  0x89 -> PER MILLE SIGN
+    '\u0409'    #  0x8A -> CYRILLIC CAPITAL LETTER LJE
+    '\u2039'    #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u040a'    #  0x8C -> CYRILLIC CAPITAL LETTER NJE
+    '\u049a'    #  0x8D -> CYRILLIC CAPITAL LETTER KA WITH DESCENDER
+    '\u04ba'    #  0x8E -> CYRILLIC CAPITAL LETTER SHHA
+    '\u040f'    #  0x8F -> CYRILLIC CAPITAL LETTER DZHE
+    '\u0452'    #  0x90 -> CYRILLIC SMALL LETTER DJE
+    '\u2018'    #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'    #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'    #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'    #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'    #  0x95 -> BULLET
+    '\u2013'    #  0x96 -> EN DASH
+    '\u2014'    #  0x97 -> EM DASH
+    '\ufffe'    #  0x98 -> UNDEFINED
+    '\u2122'    #  0x99 -> TRADE MARK SIGN
+    '\u0459'    #  0x9A -> CYRILLIC SMALL LETTER LJE
+    '\u203a'    #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u045a'    #  0x9C -> CYRILLIC SMALL LETTER NJE
+    '\u049b'    #  0x9D -> CYRILLIC SMALL LETTER KA WITH DESCENDER
+    '\u04bb'    #  0x9E -> CYRILLIC SMALL LETTER SHHA
+    '\u045f'    #  0x9F -> CYRILLIC SMALL LETTER DZHE
+    '\xa0'      #  0xA0 -> NO-BREAK SPACE
+    '\u04b0'    #  0xA1 -> CYRILLIC CAPITAL LETTER STRAIGHT U WITH STROKE
+    '\u04b1'    #  0xA2 -> CYRILLIC SMALL LETTER STRAIGHT U WITH STROKE
+    '\u04d8'    #  0xA3 -> CYRILLIC CAPITAL LETTER SCHWA
+    '\xa4'      #  0xA4 -> CURRENCY SIGN
+    '\u04e8'    #  0xA5 -> CYRILLIC CAPITAL LETTER BARRED O
+    '\xa6'      #  0xA6 -> BROKEN BAR
+    '\xa7'      #  0xA7 -> SECTION SIGN
+    '\u0401'    #  0xA8 -> CYRILLIC CAPITAL LETTER IO
+    '\xa9'      #  0xA9 -> COPYRIGHT SIGN
+    '\u0492'    #  0xAA -> CYRILLIC CAPITAL LETTER GHE WITH STROKE
+    '\xab'      #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'      #  0xAC -> NOT SIGN
+    '\xad'      #  0xAD -> SOFT HYPHEN
+    '\xae'      #  0xAE -> REGISTERED SIGN
+    '\u04ae'    #  0xAF -> CYRILLIC CAPITAL LETTER STRAIGHT U
+    '\xb0'      #  0xB0 -> DEGREE SIGN
+    '\xb1'      #  0xB1 -> PLUS-MINUS SIGN
+    '\u0406'    #  0xB2 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0456'    #  0xB3 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u04e9'    #  0xB4 -> CYRILLIC SMALL LETTER BARRED O
+    '\xb5'      #  0xB5 -> MICRO SIGN
+    '\xb6'      #  0xB6 -> PILCROW SIGN
+    '\xb7'      #  0xB7 -> MIDDLE DOT
+    '\u0451'    #  0xB8 -> CYRILLIC SMALL LETTER IO
+    '\u2116'    #  0xB9 -> NUMERO SIGN
+    '\u0493'    #  0xBA -> CYRILLIC SMALL LETTER GHE WITH STROKE
+    '\xbb'      #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u04d9'    #  0xBC -> CYRILLIC SMALL LETTER SCHWA
+    '\u04a2'    #  0xBD -> CYRILLIC CAPITAL LETTER EN WITH DESCENDER
+    '\u04a3'    #  0xBE -> CYRILLIC SMALL LETTER EN WITH DESCENDER
+    '\u04af'    #  0xBF -> CYRILLIC SMALL LETTER STRAIGHT U
+    '\u0410'    #  0xC0 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'    #  0xC1 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'    #  0xC2 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'    #  0xC3 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'    #  0xC4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'    #  0xC5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'    #  0xC6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'    #  0xC7 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'    #  0xC8 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'    #  0xC9 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'    #  0xCA -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'    #  0xCB -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'    #  0xCC -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'    #  0xCD -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'    #  0xCE -> CYRILLIC CAPITAL LETTER O
+    '\u041f'    #  0xCF -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'    #  0xD0 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'    #  0xD1 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'    #  0xD2 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'    #  0xD3 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'    #  0xD4 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'    #  0xD5 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'    #  0xD6 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'    #  0xD7 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'    #  0xD8 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'    #  0xD9 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'    #  0xDA -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'    #  0xDB -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'    #  0xDC -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'    #  0xDD -> CYRILLIC CAPITAL LETTER E
+    '\u042e'    #  0xDE -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'    #  0xDF -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'    #  0xE0 -> CYRILLIC SMALL LETTER A
+    '\u0431'    #  0xE1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'    #  0xE2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'    #  0xE3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'    #  0xE4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'    #  0xE5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'    #  0xE6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'    #  0xE7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'    #  0xE8 -> CYRILLIC SMALL LETTER I
+    '\u0439'    #  0xE9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'    #  0xEA -> CYRILLIC SMALL LETTER KA
+    '\u043b'    #  0xEB -> CYRILLIC SMALL LETTER EL
+    '\u043c'    #  0xEC -> CYRILLIC SMALL LETTER EM
+    '\u043d'    #  0xED -> CYRILLIC SMALL LETTER EN
+    '\u043e'    #  0xEE -> CYRILLIC SMALL LETTER O
+    '\u043f'    #  0xEF -> CYRILLIC SMALL LETTER PE
+    '\u0440'    #  0xF0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'    #  0xF1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'    #  0xF2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'    #  0xF3 -> CYRILLIC SMALL LETTER U
+    '\u0444'    #  0xF4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'    #  0xF5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'    #  0xF6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'    #  0xF7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'    #  0xF8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'    #  0xF9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'    #  0xFA -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'    #  0xFB -> CYRILLIC SMALL LETTER YERU
+    '\u044c'    #  0xFC -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'    #  0xFD -> CYRILLIC SMALL LETTER E
+    '\u044e'    #  0xFE -> CYRILLIC SMALL LETTER YU
+    '\u044f'    #  0xFF -> CYRILLIC SMALL LETTER YA
+)
+
+### Encoding table
+encoding_table = codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/latin_1.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/latin_1.py
new file mode 100644
index 0000000000000000000000000000000000000000..370160c0cb512f25573985bce277ea2f590a420c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/latin_1.py
@@ -0,0 +1,50 @@
+""" Python 'latin-1' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    # Note: Binding these as C functions will result in the class not
+    # converting them to methods. This is intended.
+    encode = codecs.latin_1_encode
+    decode = codecs.latin_1_decode
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.latin_1_encode(input,self.errors)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.latin_1_decode(input,self.errors)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+class StreamConverter(StreamWriter,StreamReader):
+
+    encode = codecs.latin_1_decode
+    decode = codecs.latin_1_encode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='iso8859-1',
+        encode=Codec.encode,
+        decode=Codec.decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_arabic.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_arabic.py
new file mode 100644
index 0000000000000000000000000000000000000000..72847e859c464fb6fe9a351a885cfe02f9b35e72
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_arabic.py
@@ -0,0 +1,698 @@
+""" Python Character Mapping Codec generated from 'VENDORS/APPLE/ARABIC.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_map)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_map)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-arabic',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+### Decoding Map
+
+decoding_map = codecs.make_identity_dict(range(256))
+decoding_map.update({
+    0x0080: 0x00c4,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x0081: 0x00a0,     #  NO-BREAK SPACE, right-left
+    0x0082: 0x00c7,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x0083: 0x00c9,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x0084: 0x00d1,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x0085: 0x00d6,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x0086: 0x00dc,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x0087: 0x00e1,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x0088: 0x00e0,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x0089: 0x00e2,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x008a: 0x00e4,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x008b: 0x06ba,     #  ARABIC LETTER NOON GHUNNA
+    0x008c: 0x00ab,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    0x008d: 0x00e7,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x008e: 0x00e9,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x008f: 0x00e8,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x0090: 0x00ea,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x0091: 0x00eb,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x0092: 0x00ed,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x0093: 0x2026,     #  HORIZONTAL ELLIPSIS, right-left
+    0x0094: 0x00ee,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x0095: 0x00ef,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x0096: 0x00f1,     #  LATIN SMALL LETTER N WITH TILDE
+    0x0097: 0x00f3,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x0098: 0x00bb,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    0x0099: 0x00f4,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x009a: 0x00f6,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x009b: 0x00f7,     #  DIVISION SIGN, right-left
+    0x009c: 0x00fa,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x009d: 0x00f9,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x009e: 0x00fb,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x009f: 0x00fc,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x00a0: 0x0020,     #  SPACE, right-left
+    0x00a1: 0x0021,     #  EXCLAMATION MARK, right-left
+    0x00a2: 0x0022,     #  QUOTATION MARK, right-left
+    0x00a3: 0x0023,     #  NUMBER SIGN, right-left
+    0x00a4: 0x0024,     #  DOLLAR SIGN, right-left
+    0x00a5: 0x066a,     #  ARABIC PERCENT SIGN
+    0x00a6: 0x0026,     #  AMPERSAND, right-left
+    0x00a7: 0x0027,     #  APOSTROPHE, right-left
+    0x00a8: 0x0028,     #  LEFT PARENTHESIS, right-left
+    0x00a9: 0x0029,     #  RIGHT PARENTHESIS, right-left
+    0x00aa: 0x002a,     #  ASTERISK, right-left
+    0x00ab: 0x002b,     #  PLUS SIGN, right-left
+    0x00ac: 0x060c,     #  ARABIC COMMA
+    0x00ad: 0x002d,     #  HYPHEN-MINUS, right-left
+    0x00ae: 0x002e,     #  FULL STOP, right-left
+    0x00af: 0x002f,     #  SOLIDUS, right-left
+    0x00b0: 0x0660,     #  ARABIC-INDIC DIGIT ZERO, right-left (need override)
+    0x00b1: 0x0661,     #  ARABIC-INDIC DIGIT ONE, right-left (need override)
+    0x00b2: 0x0662,     #  ARABIC-INDIC DIGIT TWO, right-left (need override)
+    0x00b3: 0x0663,     #  ARABIC-INDIC DIGIT THREE, right-left (need override)
+    0x00b4: 0x0664,     #  ARABIC-INDIC DIGIT FOUR, right-left (need override)
+    0x00b5: 0x0665,     #  ARABIC-INDIC DIGIT FIVE, right-left (need override)
+    0x00b6: 0x0666,     #  ARABIC-INDIC DIGIT SIX, right-left (need override)
+    0x00b7: 0x0667,     #  ARABIC-INDIC DIGIT SEVEN, right-left (need override)
+    0x00b8: 0x0668,     #  ARABIC-INDIC DIGIT EIGHT, right-left (need override)
+    0x00b9: 0x0669,     #  ARABIC-INDIC DIGIT NINE, right-left (need override)
+    0x00ba: 0x003a,     #  COLON, right-left
+    0x00bb: 0x061b,     #  ARABIC SEMICOLON
+    0x00bc: 0x003c,     #  LESS-THAN SIGN, right-left
+    0x00bd: 0x003d,     #  EQUALS SIGN, right-left
+    0x00be: 0x003e,     #  GREATER-THAN SIGN, right-left
+    0x00bf: 0x061f,     #  ARABIC QUESTION MARK
+    0x00c0: 0x274a,     #  EIGHT TEARDROP-SPOKED PROPELLER ASTERISK, right-left
+    0x00c1: 0x0621,     #  ARABIC LETTER HAMZA
+    0x00c2: 0x0622,     #  ARABIC LETTER ALEF WITH MADDA ABOVE
+    0x00c3: 0x0623,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE
+    0x00c4: 0x0624,     #  ARABIC LETTER WAW WITH HAMZA ABOVE
+    0x00c5: 0x0625,     #  ARABIC LETTER ALEF WITH HAMZA BELOW
+    0x00c6: 0x0626,     #  ARABIC LETTER YEH WITH HAMZA ABOVE
+    0x00c7: 0x0627,     #  ARABIC LETTER ALEF
+    0x00c8: 0x0628,     #  ARABIC LETTER BEH
+    0x00c9: 0x0629,     #  ARABIC LETTER TEH MARBUTA
+    0x00ca: 0x062a,     #  ARABIC LETTER TEH
+    0x00cb: 0x062b,     #  ARABIC LETTER THEH
+    0x00cc: 0x062c,     #  ARABIC LETTER JEEM
+    0x00cd: 0x062d,     #  ARABIC LETTER HAH
+    0x00ce: 0x062e,     #  ARABIC LETTER KHAH
+    0x00cf: 0x062f,     #  ARABIC LETTER DAL
+    0x00d0: 0x0630,     #  ARABIC LETTER THAL
+    0x00d1: 0x0631,     #  ARABIC LETTER REH
+    0x00d2: 0x0632,     #  ARABIC LETTER ZAIN
+    0x00d3: 0x0633,     #  ARABIC LETTER SEEN
+    0x00d4: 0x0634,     #  ARABIC LETTER SHEEN
+    0x00d5: 0x0635,     #  ARABIC LETTER SAD
+    0x00d6: 0x0636,     #  ARABIC LETTER DAD
+    0x00d7: 0x0637,     #  ARABIC LETTER TAH
+    0x00d8: 0x0638,     #  ARABIC LETTER ZAH
+    0x00d9: 0x0639,     #  ARABIC LETTER AIN
+    0x00da: 0x063a,     #  ARABIC LETTER GHAIN
+    0x00db: 0x005b,     #  LEFT SQUARE BRACKET, right-left
+    0x00dc: 0x005c,     #  REVERSE SOLIDUS, right-left
+    0x00dd: 0x005d,     #  RIGHT SQUARE BRACKET, right-left
+    0x00de: 0x005e,     #  CIRCUMFLEX ACCENT, right-left
+    0x00df: 0x005f,     #  LOW LINE, right-left
+    0x00e0: 0x0640,     #  ARABIC TATWEEL
+    0x00e1: 0x0641,     #  ARABIC LETTER FEH
+    0x00e2: 0x0642,     #  ARABIC LETTER QAF
+    0x00e3: 0x0643,     #  ARABIC LETTER KAF
+    0x00e4: 0x0644,     #  ARABIC LETTER LAM
+    0x00e5: 0x0645,     #  ARABIC LETTER MEEM
+    0x00e6: 0x0646,     #  ARABIC LETTER NOON
+    0x00e7: 0x0647,     #  ARABIC LETTER HEH
+    0x00e8: 0x0648,     #  ARABIC LETTER WAW
+    0x00e9: 0x0649,     #  ARABIC LETTER ALEF MAKSURA
+    0x00ea: 0x064a,     #  ARABIC LETTER YEH
+    0x00eb: 0x064b,     #  ARABIC FATHATAN
+    0x00ec: 0x064c,     #  ARABIC DAMMATAN
+    0x00ed: 0x064d,     #  ARABIC KASRATAN
+    0x00ee: 0x064e,     #  ARABIC FATHA
+    0x00ef: 0x064f,     #  ARABIC DAMMA
+    0x00f0: 0x0650,     #  ARABIC KASRA
+    0x00f1: 0x0651,     #  ARABIC SHADDA
+    0x00f2: 0x0652,     #  ARABIC SUKUN
+    0x00f3: 0x067e,     #  ARABIC LETTER PEH
+    0x00f4: 0x0679,     #  ARABIC LETTER TTEH
+    0x00f5: 0x0686,     #  ARABIC LETTER TCHEH
+    0x00f6: 0x06d5,     #  ARABIC LETTER AE
+    0x00f7: 0x06a4,     #  ARABIC LETTER VEH
+    0x00f8: 0x06af,     #  ARABIC LETTER GAF
+    0x00f9: 0x0688,     #  ARABIC LETTER DDAL
+    0x00fa: 0x0691,     #  ARABIC LETTER RREH
+    0x00fb: 0x007b,     #  LEFT CURLY BRACKET, right-left
+    0x00fc: 0x007c,     #  VERTICAL LINE, right-left
+    0x00fd: 0x007d,     #  RIGHT CURLY BRACKET, right-left
+    0x00fe: 0x0698,     #  ARABIC LETTER JEH
+    0x00ff: 0x06d2,     #  ARABIC LETTER YEH BARREE
+})
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x0000 -> CONTROL CHARACTER
+    '\x01'     #  0x0001 -> CONTROL CHARACTER
+    '\x02'     #  0x0002 -> CONTROL CHARACTER
+    '\x03'     #  0x0003 -> CONTROL CHARACTER
+    '\x04'     #  0x0004 -> CONTROL CHARACTER
+    '\x05'     #  0x0005 -> CONTROL CHARACTER
+    '\x06'     #  0x0006 -> CONTROL CHARACTER
+    '\x07'     #  0x0007 -> CONTROL CHARACTER
+    '\x08'     #  0x0008 -> CONTROL CHARACTER
+    '\t'       #  0x0009 -> CONTROL CHARACTER
+    '\n'       #  0x000a -> CONTROL CHARACTER
+    '\x0b'     #  0x000b -> CONTROL CHARACTER
+    '\x0c'     #  0x000c -> CONTROL CHARACTER
+    '\r'       #  0x000d -> CONTROL CHARACTER
+    '\x0e'     #  0x000e -> CONTROL CHARACTER
+    '\x0f'     #  0x000f -> CONTROL CHARACTER
+    '\x10'     #  0x0010 -> CONTROL CHARACTER
+    '\x11'     #  0x0011 -> CONTROL CHARACTER
+    '\x12'     #  0x0012 -> CONTROL CHARACTER
+    '\x13'     #  0x0013 -> CONTROL CHARACTER
+    '\x14'     #  0x0014 -> CONTROL CHARACTER
+    '\x15'     #  0x0015 -> CONTROL CHARACTER
+    '\x16'     #  0x0016 -> CONTROL CHARACTER
+    '\x17'     #  0x0017 -> CONTROL CHARACTER
+    '\x18'     #  0x0018 -> CONTROL CHARACTER
+    '\x19'     #  0x0019 -> CONTROL CHARACTER
+    '\x1a'     #  0x001a -> CONTROL CHARACTER
+    '\x1b'     #  0x001b -> CONTROL CHARACTER
+    '\x1c'     #  0x001c -> CONTROL CHARACTER
+    '\x1d'     #  0x001d -> CONTROL CHARACTER
+    '\x1e'     #  0x001e -> CONTROL CHARACTER
+    '\x1f'     #  0x001f -> CONTROL CHARACTER
+    ' '        #  0x0020 -> SPACE, left-right
+    '!'        #  0x0021 -> EXCLAMATION MARK, left-right
+    '"'        #  0x0022 -> QUOTATION MARK, left-right
+    '#'        #  0x0023 -> NUMBER SIGN, left-right
+    '$'        #  0x0024 -> DOLLAR SIGN, left-right
+    '%'        #  0x0025 -> PERCENT SIGN, left-right
+    '&'        #  0x0026 -> AMPERSAND, left-right
+    "'"        #  0x0027 -> APOSTROPHE, left-right
+    '('        #  0x0028 -> LEFT PARENTHESIS, left-right
+    ')'        #  0x0029 -> RIGHT PARENTHESIS, left-right
+    '*'        #  0x002a -> ASTERISK, left-right
+    '+'        #  0x002b -> PLUS SIGN, left-right
+    ','        #  0x002c -> COMMA, left-right; in Arabic-script context, displayed as 0x066C ARABIC THOUSANDS SEPARATOR
+    '-'        #  0x002d -> HYPHEN-MINUS, left-right
+    '.'        #  0x002e -> FULL STOP, left-right; in Arabic-script context, displayed as 0x066B ARABIC DECIMAL SEPARATOR
+    '/'        #  0x002f -> SOLIDUS, left-right
+    '0'        #  0x0030 -> DIGIT ZERO;  in Arabic-script context, displayed as 0x0660 ARABIC-INDIC DIGIT ZERO
+    '1'        #  0x0031 -> DIGIT ONE;   in Arabic-script context, displayed as 0x0661 ARABIC-INDIC DIGIT ONE
+    '2'        #  0x0032 -> DIGIT TWO;   in Arabic-script context, displayed as 0x0662 ARABIC-INDIC DIGIT TWO
+    '3'        #  0x0033 -> DIGIT THREE; in Arabic-script context, displayed as 0x0663 ARABIC-INDIC DIGIT THREE
+    '4'        #  0x0034 -> DIGIT FOUR;  in Arabic-script context, displayed as 0x0664 ARABIC-INDIC DIGIT FOUR
+    '5'        #  0x0035 -> DIGIT FIVE;  in Arabic-script context, displayed as 0x0665 ARABIC-INDIC DIGIT FIVE
+    '6'        #  0x0036 -> DIGIT SIX;   in Arabic-script context, displayed as 0x0666 ARABIC-INDIC DIGIT SIX
+    '7'        #  0x0037 -> DIGIT SEVEN; in Arabic-script context, displayed as 0x0667 ARABIC-INDIC DIGIT SEVEN
+    '8'        #  0x0038 -> DIGIT EIGHT; in Arabic-script context, displayed as 0x0668 ARABIC-INDIC DIGIT EIGHT
+    '9'        #  0x0039 -> DIGIT NINE;  in Arabic-script context, displayed as 0x0669 ARABIC-INDIC DIGIT NINE
+    ':'        #  0x003a -> COLON, left-right
+    ';'        #  0x003b -> SEMICOLON, left-right
+    '<'        #  0x003c -> LESS-THAN SIGN, left-right
+    '='        #  0x003d -> EQUALS SIGN, left-right
+    '>'        #  0x003e -> GREATER-THAN SIGN, left-right
+    '?'        #  0x003f -> QUESTION MARK, left-right
+    '@'        #  0x0040 -> COMMERCIAL AT
+    'A'        #  0x0041 -> LATIN CAPITAL LETTER A
+    'B'        #  0x0042 -> LATIN CAPITAL LETTER B
+    'C'        #  0x0043 -> LATIN CAPITAL LETTER C
+    'D'        #  0x0044 -> LATIN CAPITAL LETTER D
+    'E'        #  0x0045 -> LATIN CAPITAL LETTER E
+    'F'        #  0x0046 -> LATIN CAPITAL LETTER F
+    'G'        #  0x0047 -> LATIN CAPITAL LETTER G
+    'H'        #  0x0048 -> LATIN CAPITAL LETTER H
+    'I'        #  0x0049 -> LATIN CAPITAL LETTER I
+    'J'        #  0x004a -> LATIN CAPITAL LETTER J
+    'K'        #  0x004b -> LATIN CAPITAL LETTER K
+    'L'        #  0x004c -> LATIN CAPITAL LETTER L
+    'M'        #  0x004d -> LATIN CAPITAL LETTER M
+    'N'        #  0x004e -> LATIN CAPITAL LETTER N
+    'O'        #  0x004f -> LATIN CAPITAL LETTER O
+    'P'        #  0x0050 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x0051 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x0052 -> LATIN CAPITAL LETTER R
+    'S'        #  0x0053 -> LATIN CAPITAL LETTER S
+    'T'        #  0x0054 -> LATIN CAPITAL LETTER T
+    'U'        #  0x0055 -> LATIN CAPITAL LETTER U
+    'V'        #  0x0056 -> LATIN CAPITAL LETTER V
+    'W'        #  0x0057 -> LATIN CAPITAL LETTER W
+    'X'        #  0x0058 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x0059 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x005a -> LATIN CAPITAL LETTER Z
+    '['        #  0x005b -> LEFT SQUARE BRACKET, left-right
+    '\\'       #  0x005c -> REVERSE SOLIDUS, left-right
+    ']'        #  0x005d -> RIGHT SQUARE BRACKET, left-right
+    '^'        #  0x005e -> CIRCUMFLEX ACCENT, left-right
+    '_'        #  0x005f -> LOW LINE, left-right
+    '`'        #  0x0060 -> GRAVE ACCENT
+    'a'        #  0x0061 -> LATIN SMALL LETTER A
+    'b'        #  0x0062 -> LATIN SMALL LETTER B
+    'c'        #  0x0063 -> LATIN SMALL LETTER C
+    'd'        #  0x0064 -> LATIN SMALL LETTER D
+    'e'        #  0x0065 -> LATIN SMALL LETTER E
+    'f'        #  0x0066 -> LATIN SMALL LETTER F
+    'g'        #  0x0067 -> LATIN SMALL LETTER G
+    'h'        #  0x0068 -> LATIN SMALL LETTER H
+    'i'        #  0x0069 -> LATIN SMALL LETTER I
+    'j'        #  0x006a -> LATIN SMALL LETTER J
+    'k'        #  0x006b -> LATIN SMALL LETTER K
+    'l'        #  0x006c -> LATIN SMALL LETTER L
+    'm'        #  0x006d -> LATIN SMALL LETTER M
+    'n'        #  0x006e -> LATIN SMALL LETTER N
+    'o'        #  0x006f -> LATIN SMALL LETTER O
+    'p'        #  0x0070 -> LATIN SMALL LETTER P
+    'q'        #  0x0071 -> LATIN SMALL LETTER Q
+    'r'        #  0x0072 -> LATIN SMALL LETTER R
+    's'        #  0x0073 -> LATIN SMALL LETTER S
+    't'        #  0x0074 -> LATIN SMALL LETTER T
+    'u'        #  0x0075 -> LATIN SMALL LETTER U
+    'v'        #  0x0076 -> LATIN SMALL LETTER V
+    'w'        #  0x0077 -> LATIN SMALL LETTER W
+    'x'        #  0x0078 -> LATIN SMALL LETTER X
+    'y'        #  0x0079 -> LATIN SMALL LETTER Y
+    'z'        #  0x007a -> LATIN SMALL LETTER Z
+    '{'        #  0x007b -> LEFT CURLY BRACKET, left-right
+    '|'        #  0x007c -> VERTICAL LINE, left-right
+    '}'        #  0x007d -> RIGHT CURLY BRACKET, left-right
+    '~'        #  0x007e -> TILDE
+    '\x7f'     #  0x007f -> CONTROL CHARACTER
+    '\xc4'     #  0x0080 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xa0'     #  0x0081 -> NO-BREAK SPACE, right-left
+    '\xc7'     #  0x0082 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x0083 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x0084 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x0085 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x0086 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x0087 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x0088 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x0089 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x008a -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u06ba'   #  0x008b -> ARABIC LETTER NOON GHUNNA
+    '\xab'     #  0x008c -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    '\xe7'     #  0x008d -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x008e -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x008f -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x0090 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x0091 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x0092 -> LATIN SMALL LETTER I WITH ACUTE
+    '\u2026'   #  0x0093 -> HORIZONTAL ELLIPSIS, right-left
+    '\xee'     #  0x0094 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x0095 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x0096 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x0097 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xbb'     #  0x0098 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    '\xf4'     #  0x0099 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x009a -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0x009b -> DIVISION SIGN, right-left
+    '\xfa'     #  0x009c -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x009d -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x009e -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x009f -> LATIN SMALL LETTER U WITH DIAERESIS
+    ' '        #  0x00a0 -> SPACE, right-left
+    '!'        #  0x00a1 -> EXCLAMATION MARK, right-left
+    '"'        #  0x00a2 -> QUOTATION MARK, right-left
+    '#'        #  0x00a3 -> NUMBER SIGN, right-left
+    '$'        #  0x00a4 -> DOLLAR SIGN, right-left
+    '\u066a'   #  0x00a5 -> ARABIC PERCENT SIGN
+    '&'        #  0x00a6 -> AMPERSAND, right-left
+    "'"        #  0x00a7 -> APOSTROPHE, right-left
+    '('        #  0x00a8 -> LEFT PARENTHESIS, right-left
+    ')'        #  0x00a9 -> RIGHT PARENTHESIS, right-left
+    '*'        #  0x00aa -> ASTERISK, right-left
+    '+'        #  0x00ab -> PLUS SIGN, right-left
+    '\u060c'   #  0x00ac -> ARABIC COMMA
+    '-'        #  0x00ad -> HYPHEN-MINUS, right-left
+    '.'        #  0x00ae -> FULL STOP, right-left
+    '/'        #  0x00af -> SOLIDUS, right-left
+    '\u0660'   #  0x00b0 -> ARABIC-INDIC DIGIT ZERO, right-left (need override)
+    '\u0661'   #  0x00b1 -> ARABIC-INDIC DIGIT ONE, right-left (need override)
+    '\u0662'   #  0x00b2 -> ARABIC-INDIC DIGIT TWO, right-left (need override)
+    '\u0663'   #  0x00b3 -> ARABIC-INDIC DIGIT THREE, right-left (need override)
+    '\u0664'   #  0x00b4 -> ARABIC-INDIC DIGIT FOUR, right-left (need override)
+    '\u0665'   #  0x00b5 -> ARABIC-INDIC DIGIT FIVE, right-left (need override)
+    '\u0666'   #  0x00b6 -> ARABIC-INDIC DIGIT SIX, right-left (need override)
+    '\u0667'   #  0x00b7 -> ARABIC-INDIC DIGIT SEVEN, right-left (need override)
+    '\u0668'   #  0x00b8 -> ARABIC-INDIC DIGIT EIGHT, right-left (need override)
+    '\u0669'   #  0x00b9 -> ARABIC-INDIC DIGIT NINE, right-left (need override)
+    ':'        #  0x00ba -> COLON, right-left
+    '\u061b'   #  0x00bb -> ARABIC SEMICOLON
+    '<'        #  0x00bc -> LESS-THAN SIGN, right-left
+    '='        #  0x00bd -> EQUALS SIGN, right-left
+    '>'        #  0x00be -> GREATER-THAN SIGN, right-left
+    '\u061f'   #  0x00bf -> ARABIC QUESTION MARK
+    '\u274a'   #  0x00c0 -> EIGHT TEARDROP-SPOKED PROPELLER ASTERISK, right-left
+    '\u0621'   #  0x00c1 -> ARABIC LETTER HAMZA
+    '\u0622'   #  0x00c2 -> ARABIC LETTER ALEF WITH MADDA ABOVE
+    '\u0623'   #  0x00c3 -> ARABIC LETTER ALEF WITH HAMZA ABOVE
+    '\u0624'   #  0x00c4 -> ARABIC LETTER WAW WITH HAMZA ABOVE
+    '\u0625'   #  0x00c5 -> ARABIC LETTER ALEF WITH HAMZA BELOW
+    '\u0626'   #  0x00c6 -> ARABIC LETTER YEH WITH HAMZA ABOVE
+    '\u0627'   #  0x00c7 -> ARABIC LETTER ALEF
+    '\u0628'   #  0x00c8 -> ARABIC LETTER BEH
+    '\u0629'   #  0x00c9 -> ARABIC LETTER TEH MARBUTA
+    '\u062a'   #  0x00ca -> ARABIC LETTER TEH
+    '\u062b'   #  0x00cb -> ARABIC LETTER THEH
+    '\u062c'   #  0x00cc -> ARABIC LETTER JEEM
+    '\u062d'   #  0x00cd -> ARABIC LETTER HAH
+    '\u062e'   #  0x00ce -> ARABIC LETTER KHAH
+    '\u062f'   #  0x00cf -> ARABIC LETTER DAL
+    '\u0630'   #  0x00d0 -> ARABIC LETTER THAL
+    '\u0631'   #  0x00d1 -> ARABIC LETTER REH
+    '\u0632'   #  0x00d2 -> ARABIC LETTER ZAIN
+    '\u0633'   #  0x00d3 -> ARABIC LETTER SEEN
+    '\u0634'   #  0x00d4 -> ARABIC LETTER SHEEN
+    '\u0635'   #  0x00d5 -> ARABIC LETTER SAD
+    '\u0636'   #  0x00d6 -> ARABIC LETTER DAD
+    '\u0637'   #  0x00d7 -> ARABIC LETTER TAH
+    '\u0638'   #  0x00d8 -> ARABIC LETTER ZAH
+    '\u0639'   #  0x00d9 -> ARABIC LETTER AIN
+    '\u063a'   #  0x00da -> ARABIC LETTER GHAIN
+    '['        #  0x00db -> LEFT SQUARE BRACKET, right-left
+    '\\'       #  0x00dc -> REVERSE SOLIDUS, right-left
+    ']'        #  0x00dd -> RIGHT SQUARE BRACKET, right-left
+    '^'        #  0x00de -> CIRCUMFLEX ACCENT, right-left
+    '_'        #  0x00df -> LOW LINE, right-left
+    '\u0640'   #  0x00e0 -> ARABIC TATWEEL
+    '\u0641'   #  0x00e1 -> ARABIC LETTER FEH
+    '\u0642'   #  0x00e2 -> ARABIC LETTER QAF
+    '\u0643'   #  0x00e3 -> ARABIC LETTER KAF
+    '\u0644'   #  0x00e4 -> ARABIC LETTER LAM
+    '\u0645'   #  0x00e5 -> ARABIC LETTER MEEM
+    '\u0646'   #  0x00e6 -> ARABIC LETTER NOON
+    '\u0647'   #  0x00e7 -> ARABIC LETTER HEH
+    '\u0648'   #  0x00e8 -> ARABIC LETTER WAW
+    '\u0649'   #  0x00e9 -> ARABIC LETTER ALEF MAKSURA
+    '\u064a'   #  0x00ea -> ARABIC LETTER YEH
+    '\u064b'   #  0x00eb -> ARABIC FATHATAN
+    '\u064c'   #  0x00ec -> ARABIC DAMMATAN
+    '\u064d'   #  0x00ed -> ARABIC KASRATAN
+    '\u064e'   #  0x00ee -> ARABIC FATHA
+    '\u064f'   #  0x00ef -> ARABIC DAMMA
+    '\u0650'   #  0x00f0 -> ARABIC KASRA
+    '\u0651'   #  0x00f1 -> ARABIC SHADDA
+    '\u0652'   #  0x00f2 -> ARABIC SUKUN
+    '\u067e'   #  0x00f3 -> ARABIC LETTER PEH
+    '\u0679'   #  0x00f4 -> ARABIC LETTER TTEH
+    '\u0686'   #  0x00f5 -> ARABIC LETTER TCHEH
+    '\u06d5'   #  0x00f6 -> ARABIC LETTER AE
+    '\u06a4'   #  0x00f7 -> ARABIC LETTER VEH
+    '\u06af'   #  0x00f8 -> ARABIC LETTER GAF
+    '\u0688'   #  0x00f9 -> ARABIC LETTER DDAL
+    '\u0691'   #  0x00fa -> ARABIC LETTER RREH
+    '{'        #  0x00fb -> LEFT CURLY BRACKET, right-left
+    '|'        #  0x00fc -> VERTICAL LINE, right-left
+    '}'        #  0x00fd -> RIGHT CURLY BRACKET, right-left
+    '\u0698'   #  0x00fe -> ARABIC LETTER JEH
+    '\u06d2'   #  0x00ff -> ARABIC LETTER YEH BARREE
+)
+
+### Encoding Map
+
+encoding_map = {
+    0x0000: 0x0000,     #  CONTROL CHARACTER
+    0x0001: 0x0001,     #  CONTROL CHARACTER
+    0x0002: 0x0002,     #  CONTROL CHARACTER
+    0x0003: 0x0003,     #  CONTROL CHARACTER
+    0x0004: 0x0004,     #  CONTROL CHARACTER
+    0x0005: 0x0005,     #  CONTROL CHARACTER
+    0x0006: 0x0006,     #  CONTROL CHARACTER
+    0x0007: 0x0007,     #  CONTROL CHARACTER
+    0x0008: 0x0008,     #  CONTROL CHARACTER
+    0x0009: 0x0009,     #  CONTROL CHARACTER
+    0x000a: 0x000a,     #  CONTROL CHARACTER
+    0x000b: 0x000b,     #  CONTROL CHARACTER
+    0x000c: 0x000c,     #  CONTROL CHARACTER
+    0x000d: 0x000d,     #  CONTROL CHARACTER
+    0x000e: 0x000e,     #  CONTROL CHARACTER
+    0x000f: 0x000f,     #  CONTROL CHARACTER
+    0x0010: 0x0010,     #  CONTROL CHARACTER
+    0x0011: 0x0011,     #  CONTROL CHARACTER
+    0x0012: 0x0012,     #  CONTROL CHARACTER
+    0x0013: 0x0013,     #  CONTROL CHARACTER
+    0x0014: 0x0014,     #  CONTROL CHARACTER
+    0x0015: 0x0015,     #  CONTROL CHARACTER
+    0x0016: 0x0016,     #  CONTROL CHARACTER
+    0x0017: 0x0017,     #  CONTROL CHARACTER
+    0x0018: 0x0018,     #  CONTROL CHARACTER
+    0x0019: 0x0019,     #  CONTROL CHARACTER
+    0x001a: 0x001a,     #  CONTROL CHARACTER
+    0x001b: 0x001b,     #  CONTROL CHARACTER
+    0x001c: 0x001c,     #  CONTROL CHARACTER
+    0x001d: 0x001d,     #  CONTROL CHARACTER
+    0x001e: 0x001e,     #  CONTROL CHARACTER
+    0x001f: 0x001f,     #  CONTROL CHARACTER
+    0x0020: 0x0020,     #  SPACE, left-right
+    0x0020: 0x00a0,     #  SPACE, right-left
+    0x0021: 0x0021,     #  EXCLAMATION MARK, left-right
+    0x0021: 0x00a1,     #  EXCLAMATION MARK, right-left
+    0x0022: 0x0022,     #  QUOTATION MARK, left-right
+    0x0022: 0x00a2,     #  QUOTATION MARK, right-left
+    0x0023: 0x0023,     #  NUMBER SIGN, left-right
+    0x0023: 0x00a3,     #  NUMBER SIGN, right-left
+    0x0024: 0x0024,     #  DOLLAR SIGN, left-right
+    0x0024: 0x00a4,     #  DOLLAR SIGN, right-left
+    0x0025: 0x0025,     #  PERCENT SIGN, left-right
+    0x0026: 0x0026,     #  AMPERSAND, left-right
+    0x0026: 0x00a6,     #  AMPERSAND, right-left
+    0x0027: 0x0027,     #  APOSTROPHE, left-right
+    0x0027: 0x00a7,     #  APOSTROPHE, right-left
+    0x0028: 0x0028,     #  LEFT PARENTHESIS, left-right
+    0x0028: 0x00a8,     #  LEFT PARENTHESIS, right-left
+    0x0029: 0x0029,     #  RIGHT PARENTHESIS, left-right
+    0x0029: 0x00a9,     #  RIGHT PARENTHESIS, right-left
+    0x002a: 0x002a,     #  ASTERISK, left-right
+    0x002a: 0x00aa,     #  ASTERISK, right-left
+    0x002b: 0x002b,     #  PLUS SIGN, left-right
+    0x002b: 0x00ab,     #  PLUS SIGN, right-left
+    0x002c: 0x002c,     #  COMMA, left-right; in Arabic-script context, displayed as 0x066C ARABIC THOUSANDS SEPARATOR
+    0x002d: 0x002d,     #  HYPHEN-MINUS, left-right
+    0x002d: 0x00ad,     #  HYPHEN-MINUS, right-left
+    0x002e: 0x002e,     #  FULL STOP, left-right; in Arabic-script context, displayed as 0x066B ARABIC DECIMAL SEPARATOR
+    0x002e: 0x00ae,     #  FULL STOP, right-left
+    0x002f: 0x002f,     #  SOLIDUS, left-right
+    0x002f: 0x00af,     #  SOLIDUS, right-left
+    0x0030: 0x0030,     #  DIGIT ZERO;  in Arabic-script context, displayed as 0x0660 ARABIC-INDIC DIGIT ZERO
+    0x0031: 0x0031,     #  DIGIT ONE;   in Arabic-script context, displayed as 0x0661 ARABIC-INDIC DIGIT ONE
+    0x0032: 0x0032,     #  DIGIT TWO;   in Arabic-script context, displayed as 0x0662 ARABIC-INDIC DIGIT TWO
+    0x0033: 0x0033,     #  DIGIT THREE; in Arabic-script context, displayed as 0x0663 ARABIC-INDIC DIGIT THREE
+    0x0034: 0x0034,     #  DIGIT FOUR;  in Arabic-script context, displayed as 0x0664 ARABIC-INDIC DIGIT FOUR
+    0x0035: 0x0035,     #  DIGIT FIVE;  in Arabic-script context, displayed as 0x0665 ARABIC-INDIC DIGIT FIVE
+    0x0036: 0x0036,     #  DIGIT SIX;   in Arabic-script context, displayed as 0x0666 ARABIC-INDIC DIGIT SIX
+    0x0037: 0x0037,     #  DIGIT SEVEN; in Arabic-script context, displayed as 0x0667 ARABIC-INDIC DIGIT SEVEN
+    0x0038: 0x0038,     #  DIGIT EIGHT; in Arabic-script context, displayed as 0x0668 ARABIC-INDIC DIGIT EIGHT
+    0x0039: 0x0039,     #  DIGIT NINE;  in Arabic-script context, displayed as 0x0669 ARABIC-INDIC DIGIT NINE
+    0x003a: 0x003a,     #  COLON, left-right
+    0x003a: 0x00ba,     #  COLON, right-left
+    0x003b: 0x003b,     #  SEMICOLON, left-right
+    0x003c: 0x003c,     #  LESS-THAN SIGN, left-right
+    0x003c: 0x00bc,     #  LESS-THAN SIGN, right-left
+    0x003d: 0x003d,     #  EQUALS SIGN, left-right
+    0x003d: 0x00bd,     #  EQUALS SIGN, right-left
+    0x003e: 0x003e,     #  GREATER-THAN SIGN, left-right
+    0x003e: 0x00be,     #  GREATER-THAN SIGN, right-left
+    0x003f: 0x003f,     #  QUESTION MARK, left-right
+    0x0040: 0x0040,     #  COMMERCIAL AT
+    0x0041: 0x0041,     #  LATIN CAPITAL LETTER A
+    0x0042: 0x0042,     #  LATIN CAPITAL LETTER B
+    0x0043: 0x0043,     #  LATIN CAPITAL LETTER C
+    0x0044: 0x0044,     #  LATIN CAPITAL LETTER D
+    0x0045: 0x0045,     #  LATIN CAPITAL LETTER E
+    0x0046: 0x0046,     #  LATIN CAPITAL LETTER F
+    0x0047: 0x0047,     #  LATIN CAPITAL LETTER G
+    0x0048: 0x0048,     #  LATIN CAPITAL LETTER H
+    0x0049: 0x0049,     #  LATIN CAPITAL LETTER I
+    0x004a: 0x004a,     #  LATIN CAPITAL LETTER J
+    0x004b: 0x004b,     #  LATIN CAPITAL LETTER K
+    0x004c: 0x004c,     #  LATIN CAPITAL LETTER L
+    0x004d: 0x004d,     #  LATIN CAPITAL LETTER M
+    0x004e: 0x004e,     #  LATIN CAPITAL LETTER N
+    0x004f: 0x004f,     #  LATIN CAPITAL LETTER O
+    0x0050: 0x0050,     #  LATIN CAPITAL LETTER P
+    0x0051: 0x0051,     #  LATIN CAPITAL LETTER Q
+    0x0052: 0x0052,     #  LATIN CAPITAL LETTER R
+    0x0053: 0x0053,     #  LATIN CAPITAL LETTER S
+    0x0054: 0x0054,     #  LATIN CAPITAL LETTER T
+    0x0055: 0x0055,     #  LATIN CAPITAL LETTER U
+    0x0056: 0x0056,     #  LATIN CAPITAL LETTER V
+    0x0057: 0x0057,     #  LATIN CAPITAL LETTER W
+    0x0058: 0x0058,     #  LATIN CAPITAL LETTER X
+    0x0059: 0x0059,     #  LATIN CAPITAL LETTER Y
+    0x005a: 0x005a,     #  LATIN CAPITAL LETTER Z
+    0x005b: 0x005b,     #  LEFT SQUARE BRACKET, left-right
+    0x005b: 0x00db,     #  LEFT SQUARE BRACKET, right-left
+    0x005c: 0x005c,     #  REVERSE SOLIDUS, left-right
+    0x005c: 0x00dc,     #  REVERSE SOLIDUS, right-left
+    0x005d: 0x005d,     #  RIGHT SQUARE BRACKET, left-right
+    0x005d: 0x00dd,     #  RIGHT SQUARE BRACKET, right-left
+    0x005e: 0x005e,     #  CIRCUMFLEX ACCENT, left-right
+    0x005e: 0x00de,     #  CIRCUMFLEX ACCENT, right-left
+    0x005f: 0x005f,     #  LOW LINE, left-right
+    0x005f: 0x00df,     #  LOW LINE, right-left
+    0x0060: 0x0060,     #  GRAVE ACCENT
+    0x0061: 0x0061,     #  LATIN SMALL LETTER A
+    0x0062: 0x0062,     #  LATIN SMALL LETTER B
+    0x0063: 0x0063,     #  LATIN SMALL LETTER C
+    0x0064: 0x0064,     #  LATIN SMALL LETTER D
+    0x0065: 0x0065,     #  LATIN SMALL LETTER E
+    0x0066: 0x0066,     #  LATIN SMALL LETTER F
+    0x0067: 0x0067,     #  LATIN SMALL LETTER G
+    0x0068: 0x0068,     #  LATIN SMALL LETTER H
+    0x0069: 0x0069,     #  LATIN SMALL LETTER I
+    0x006a: 0x006a,     #  LATIN SMALL LETTER J
+    0x006b: 0x006b,     #  LATIN SMALL LETTER K
+    0x006c: 0x006c,     #  LATIN SMALL LETTER L
+    0x006d: 0x006d,     #  LATIN SMALL LETTER M
+    0x006e: 0x006e,     #  LATIN SMALL LETTER N
+    0x006f: 0x006f,     #  LATIN SMALL LETTER O
+    0x0070: 0x0070,     #  LATIN SMALL LETTER P
+    0x0071: 0x0071,     #  LATIN SMALL LETTER Q
+    0x0072: 0x0072,     #  LATIN SMALL LETTER R
+    0x0073: 0x0073,     #  LATIN SMALL LETTER S
+    0x0074: 0x0074,     #  LATIN SMALL LETTER T
+    0x0075: 0x0075,     #  LATIN SMALL LETTER U
+    0x0076: 0x0076,     #  LATIN SMALL LETTER V
+    0x0077: 0x0077,     #  LATIN SMALL LETTER W
+    0x0078: 0x0078,     #  LATIN SMALL LETTER X
+    0x0079: 0x0079,     #  LATIN SMALL LETTER Y
+    0x007a: 0x007a,     #  LATIN SMALL LETTER Z
+    0x007b: 0x007b,     #  LEFT CURLY BRACKET, left-right
+    0x007b: 0x00fb,     #  LEFT CURLY BRACKET, right-left
+    0x007c: 0x007c,     #  VERTICAL LINE, left-right
+    0x007c: 0x00fc,     #  VERTICAL LINE, right-left
+    0x007d: 0x007d,     #  RIGHT CURLY BRACKET, left-right
+    0x007d: 0x00fd,     #  RIGHT CURLY BRACKET, right-left
+    0x007e: 0x007e,     #  TILDE
+    0x007f: 0x007f,     #  CONTROL CHARACTER
+    0x00a0: 0x0081,     #  NO-BREAK SPACE, right-left
+    0x00ab: 0x008c,     #  LEFT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    0x00bb: 0x0098,     #  RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    0x00c4: 0x0080,     #  LATIN CAPITAL LETTER A WITH DIAERESIS
+    0x00c7: 0x0082,     #  LATIN CAPITAL LETTER C WITH CEDILLA
+    0x00c9: 0x0083,     #  LATIN CAPITAL LETTER E WITH ACUTE
+    0x00d1: 0x0084,     #  LATIN CAPITAL LETTER N WITH TILDE
+    0x00d6: 0x0085,     #  LATIN CAPITAL LETTER O WITH DIAERESIS
+    0x00dc: 0x0086,     #  LATIN CAPITAL LETTER U WITH DIAERESIS
+    0x00e0: 0x0088,     #  LATIN SMALL LETTER A WITH GRAVE
+    0x00e1: 0x0087,     #  LATIN SMALL LETTER A WITH ACUTE
+    0x00e2: 0x0089,     #  LATIN SMALL LETTER A WITH CIRCUMFLEX
+    0x00e4: 0x008a,     #  LATIN SMALL LETTER A WITH DIAERESIS
+    0x00e7: 0x008d,     #  LATIN SMALL LETTER C WITH CEDILLA
+    0x00e8: 0x008f,     #  LATIN SMALL LETTER E WITH GRAVE
+    0x00e9: 0x008e,     #  LATIN SMALL LETTER E WITH ACUTE
+    0x00ea: 0x0090,     #  LATIN SMALL LETTER E WITH CIRCUMFLEX
+    0x00eb: 0x0091,     #  LATIN SMALL LETTER E WITH DIAERESIS
+    0x00ed: 0x0092,     #  LATIN SMALL LETTER I WITH ACUTE
+    0x00ee: 0x0094,     #  LATIN SMALL LETTER I WITH CIRCUMFLEX
+    0x00ef: 0x0095,     #  LATIN SMALL LETTER I WITH DIAERESIS
+    0x00f1: 0x0096,     #  LATIN SMALL LETTER N WITH TILDE
+    0x00f3: 0x0097,     #  LATIN SMALL LETTER O WITH ACUTE
+    0x00f4: 0x0099,     #  LATIN SMALL LETTER O WITH CIRCUMFLEX
+    0x00f6: 0x009a,     #  LATIN SMALL LETTER O WITH DIAERESIS
+    0x00f7: 0x009b,     #  DIVISION SIGN, right-left
+    0x00f9: 0x009d,     #  LATIN SMALL LETTER U WITH GRAVE
+    0x00fa: 0x009c,     #  LATIN SMALL LETTER U WITH ACUTE
+    0x00fb: 0x009e,     #  LATIN SMALL LETTER U WITH CIRCUMFLEX
+    0x00fc: 0x009f,     #  LATIN SMALL LETTER U WITH DIAERESIS
+    0x060c: 0x00ac,     #  ARABIC COMMA
+    0x061b: 0x00bb,     #  ARABIC SEMICOLON
+    0x061f: 0x00bf,     #  ARABIC QUESTION MARK
+    0x0621: 0x00c1,     #  ARABIC LETTER HAMZA
+    0x0622: 0x00c2,     #  ARABIC LETTER ALEF WITH MADDA ABOVE
+    0x0623: 0x00c3,     #  ARABIC LETTER ALEF WITH HAMZA ABOVE
+    0x0624: 0x00c4,     #  ARABIC LETTER WAW WITH HAMZA ABOVE
+    0x0625: 0x00c5,     #  ARABIC LETTER ALEF WITH HAMZA BELOW
+    0x0626: 0x00c6,     #  ARABIC LETTER YEH WITH HAMZA ABOVE
+    0x0627: 0x00c7,     #  ARABIC LETTER ALEF
+    0x0628: 0x00c8,     #  ARABIC LETTER BEH
+    0x0629: 0x00c9,     #  ARABIC LETTER TEH MARBUTA
+    0x062a: 0x00ca,     #  ARABIC LETTER TEH
+    0x062b: 0x00cb,     #  ARABIC LETTER THEH
+    0x062c: 0x00cc,     #  ARABIC LETTER JEEM
+    0x062d: 0x00cd,     #  ARABIC LETTER HAH
+    0x062e: 0x00ce,     #  ARABIC LETTER KHAH
+    0x062f: 0x00cf,     #  ARABIC LETTER DAL
+    0x0630: 0x00d0,     #  ARABIC LETTER THAL
+    0x0631: 0x00d1,     #  ARABIC LETTER REH
+    0x0632: 0x00d2,     #  ARABIC LETTER ZAIN
+    0x0633: 0x00d3,     #  ARABIC LETTER SEEN
+    0x0634: 0x00d4,     #  ARABIC LETTER SHEEN
+    0x0635: 0x00d5,     #  ARABIC LETTER SAD
+    0x0636: 0x00d6,     #  ARABIC LETTER DAD
+    0x0637: 0x00d7,     #  ARABIC LETTER TAH
+    0x0638: 0x00d8,     #  ARABIC LETTER ZAH
+    0x0639: 0x00d9,     #  ARABIC LETTER AIN
+    0x063a: 0x00da,     #  ARABIC LETTER GHAIN
+    0x0640: 0x00e0,     #  ARABIC TATWEEL
+    0x0641: 0x00e1,     #  ARABIC LETTER FEH
+    0x0642: 0x00e2,     #  ARABIC LETTER QAF
+    0x0643: 0x00e3,     #  ARABIC LETTER KAF
+    0x0644: 0x00e4,     #  ARABIC LETTER LAM
+    0x0645: 0x00e5,     #  ARABIC LETTER MEEM
+    0x0646: 0x00e6,     #  ARABIC LETTER NOON
+    0x0647: 0x00e7,     #  ARABIC LETTER HEH
+    0x0648: 0x00e8,     #  ARABIC LETTER WAW
+    0x0649: 0x00e9,     #  ARABIC LETTER ALEF MAKSURA
+    0x064a: 0x00ea,     #  ARABIC LETTER YEH
+    0x064b: 0x00eb,     #  ARABIC FATHATAN
+    0x064c: 0x00ec,     #  ARABIC DAMMATAN
+    0x064d: 0x00ed,     #  ARABIC KASRATAN
+    0x064e: 0x00ee,     #  ARABIC FATHA
+    0x064f: 0x00ef,     #  ARABIC DAMMA
+    0x0650: 0x00f0,     #  ARABIC KASRA
+    0x0651: 0x00f1,     #  ARABIC SHADDA
+    0x0652: 0x00f2,     #  ARABIC SUKUN
+    0x0660: 0x00b0,     #  ARABIC-INDIC DIGIT ZERO, right-left (need override)
+    0x0661: 0x00b1,     #  ARABIC-INDIC DIGIT ONE, right-left (need override)
+    0x0662: 0x00b2,     #  ARABIC-INDIC DIGIT TWO, right-left (need override)
+    0x0663: 0x00b3,     #  ARABIC-INDIC DIGIT THREE, right-left (need override)
+    0x0664: 0x00b4,     #  ARABIC-INDIC DIGIT FOUR, right-left (need override)
+    0x0665: 0x00b5,     #  ARABIC-INDIC DIGIT FIVE, right-left (need override)
+    0x0666: 0x00b6,     #  ARABIC-INDIC DIGIT SIX, right-left (need override)
+    0x0667: 0x00b7,     #  ARABIC-INDIC DIGIT SEVEN, right-left (need override)
+    0x0668: 0x00b8,     #  ARABIC-INDIC DIGIT EIGHT, right-left (need override)
+    0x0669: 0x00b9,     #  ARABIC-INDIC DIGIT NINE, right-left (need override)
+    0x066a: 0x00a5,     #  ARABIC PERCENT SIGN
+    0x0679: 0x00f4,     #  ARABIC LETTER TTEH
+    0x067e: 0x00f3,     #  ARABIC LETTER PEH
+    0x0686: 0x00f5,     #  ARABIC LETTER TCHEH
+    0x0688: 0x00f9,     #  ARABIC LETTER DDAL
+    0x0691: 0x00fa,     #  ARABIC LETTER RREH
+    0x0698: 0x00fe,     #  ARABIC LETTER JEH
+    0x06a4: 0x00f7,     #  ARABIC LETTER VEH
+    0x06af: 0x00f8,     #  ARABIC LETTER GAF
+    0x06ba: 0x008b,     #  ARABIC LETTER NOON GHUNNA
+    0x06d2: 0x00ff,     #  ARABIC LETTER YEH BARREE
+    0x06d5: 0x00f6,     #  ARABIC LETTER AE
+    0x2026: 0x0093,     #  HORIZONTAL ELLIPSIS, right-left
+    0x274a: 0x00c0,     #  EIGHT TEARDROP-SPOKED PROPELLER ASTERISK, right-left
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_croatian.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_croatian.py
new file mode 100644
index 0000000000000000000000000000000000000000..4a92fe61a4f12544b4455e65f415bae3fa918a6d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_croatian.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_croatian generated from 'MAPPINGS/VENDORS/APPLE/CROATIAN.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-croatian',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x81 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe3'     #  0x8B -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x8C -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xec'     #  0x93 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf2'     #  0x98 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\u0160'   #  0xA9 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\xb4'     #  0xAB -> ACUTE ACCENT
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\u017d'   #  0xAE -> LATIN CAPITAL LETTER Z WITH CARON
+    '\xd8'     #  0xAF -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\u2206'   #  0xB4 -> INCREMENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u220f'   #  0xB8 -> N-ARY PRODUCT
+    '\u0161'   #  0xB9 -> LATIN SMALL LETTER S WITH CARON
+    '\u222b'   #  0xBA -> INTEGRAL
+    '\xaa'     #  0xBB -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xBC -> MASCULINE ORDINAL INDICATOR
+    '\u03a9'   #  0xBD -> GREEK CAPITAL LETTER OMEGA
+    '\u017e'   #  0xBE -> LATIN SMALL LETTER Z WITH CARON
+    '\xf8'     #  0xBF -> LATIN SMALL LETTER O WITH STROKE
+    '\xbf'     #  0xC0 -> INVERTED QUESTION MARK
+    '\xa1'     #  0xC1 -> INVERTED EXCLAMATION MARK
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u0106'   #  0xC6 -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u010c'   #  0xC8 -> LATIN CAPITAL LETTER C WITH CARON
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\xc0'     #  0xCB -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc3'     #  0xCC -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0152'   #  0xCE -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u0110'   #  0xD0 -> LATIN CAPITAL LETTER D WITH STROKE
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\uf8ff'   #  0xD8 -> Apple logo
+    '\xa9'     #  0xD9 -> COPYRIGHT SIGN
+    '\u2044'   #  0xDA -> FRACTION SLASH
+    '\u20ac'   #  0xDB -> EURO SIGN
+    '\u2039'   #  0xDC -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u203a'   #  0xDD -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\xc6'     #  0xDE -> LATIN CAPITAL LETTER AE
+    '\xbb'     #  0xDF -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2013'   #  0xE0 -> EN DASH
+    '\xb7'     #  0xE1 -> MIDDLE DOT
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2030'   #  0xE4 -> PER MILLE SIGN
+    '\xc2'     #  0xE5 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\u0107'   #  0xE6 -> LATIN SMALL LETTER C WITH ACUTE
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\u010d'   #  0xE8 -> LATIN SMALL LETTER C WITH CARON
+    '\xc8'     #  0xE9 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xEB -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xEC -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0xED -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u0111'   #  0xF0 -> LATIN SMALL LETTER D WITH STROKE
+    '\xd2'     #  0xF1 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xF3 -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0xF4 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\u0131'   #  0xF5 -> LATIN SMALL LETTER DOTLESS I
+    '\u02c6'   #  0xF6 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u02dc'   #  0xF7 -> SMALL TILDE
+    '\xaf'     #  0xF8 -> MACRON
+    '\u03c0'   #  0xF9 -> GREEK SMALL LETTER PI
+    '\xcb'     #  0xFA -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\u02da'   #  0xFB -> RING ABOVE
+    '\xb8'     #  0xFC -> CEDILLA
+    '\xca'     #  0xFD -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xe6'     #  0xFE -> LATIN SMALL LETTER AE
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_cyrillic.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_cyrillic.py
new file mode 100644
index 0000000000000000000000000000000000000000..d20272acfadf68a4afc0f040cf8526844aaaaad3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_cyrillic.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_cyrillic generated from 'MAPPINGS/VENDORS/APPLE/CYRILLIC.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-cyrillic',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\u0410'   #  0x80 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0x81 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0x82 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0x83 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0x84 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0x85 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0x86 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0x87 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0x88 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0x89 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0x8A -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0x8B -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0x8C -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0x8D -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0x8E -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0x8F -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0x90 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0x91 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0x92 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0x93 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0x94 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0x95 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0x96 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0x97 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0x98 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0x99 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0x9A -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0x9B -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0x9C -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0x9D -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0x9E -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0x9F -> CYRILLIC CAPITAL LETTER YA
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\u0490'   #  0xA2 -> CYRILLIC CAPITAL LETTER GHE WITH UPTURN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\u0406'   #  0xA7 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\u0402'   #  0xAB -> CYRILLIC CAPITAL LETTER DJE
+    '\u0452'   #  0xAC -> CYRILLIC SMALL LETTER DJE
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\u0403'   #  0xAE -> CYRILLIC CAPITAL LETTER GJE
+    '\u0453'   #  0xAF -> CYRILLIC SMALL LETTER GJE
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\u0456'   #  0xB4 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u0491'   #  0xB6 -> CYRILLIC SMALL LETTER GHE WITH UPTURN
+    '\u0408'   #  0xB7 -> CYRILLIC CAPITAL LETTER JE
+    '\u0404'   #  0xB8 -> CYRILLIC CAPITAL LETTER UKRAINIAN IE
+    '\u0454'   #  0xB9 -> CYRILLIC SMALL LETTER UKRAINIAN IE
+    '\u0407'   #  0xBA -> CYRILLIC CAPITAL LETTER YI
+    '\u0457'   #  0xBB -> CYRILLIC SMALL LETTER YI
+    '\u0409'   #  0xBC -> CYRILLIC CAPITAL LETTER LJE
+    '\u0459'   #  0xBD -> CYRILLIC SMALL LETTER LJE
+    '\u040a'   #  0xBE -> CYRILLIC CAPITAL LETTER NJE
+    '\u045a'   #  0xBF -> CYRILLIC SMALL LETTER NJE
+    '\u0458'   #  0xC0 -> CYRILLIC SMALL LETTER JE
+    '\u0405'   #  0xC1 -> CYRILLIC CAPITAL LETTER DZE
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\u040b'   #  0xCB -> CYRILLIC CAPITAL LETTER TSHE
+    '\u045b'   #  0xCC -> CYRILLIC SMALL LETTER TSHE
+    '\u040c'   #  0xCD -> CYRILLIC CAPITAL LETTER KJE
+    '\u045c'   #  0xCE -> CYRILLIC SMALL LETTER KJE
+    '\u0455'   #  0xCF -> CYRILLIC SMALL LETTER DZE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u201e'   #  0xD7 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u040e'   #  0xD8 -> CYRILLIC CAPITAL LETTER SHORT U
+    '\u045e'   #  0xD9 -> CYRILLIC SMALL LETTER SHORT U
+    '\u040f'   #  0xDA -> CYRILLIC CAPITAL LETTER DZHE
+    '\u045f'   #  0xDB -> CYRILLIC SMALL LETTER DZHE
+    '\u2116'   #  0xDC -> NUMERO SIGN
+    '\u0401'   #  0xDD -> CYRILLIC CAPITAL LETTER IO
+    '\u0451'   #  0xDE -> CYRILLIC SMALL LETTER IO
+    '\u044f'   #  0xDF -> CYRILLIC SMALL LETTER YA
+    '\u0430'   #  0xE0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xE1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0xE2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0xE3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0xE4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xE5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0xE6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0xE7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0xE8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xE9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xEA -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xEB -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xEC -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xED -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xEE -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xEF -> CYRILLIC SMALL LETTER PE
+    '\u0440'   #  0xF0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xF1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xF2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xF3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0xF4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0xF5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0xF6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0xF7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0xF8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0xF9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0xFA -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0xFB -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0xFC -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0xFD -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0xFE -> CYRILLIC SMALL LETTER YU
+    '\u20ac'   #  0xFF -> EURO SIGN
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_farsi.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_farsi.py
new file mode 100644
index 0000000000000000000000000000000000000000..e357d43510b5f62ce99233c830ef687c5064eedf
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_farsi.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_farsi generated from 'MAPPINGS/VENDORS/APPLE/FARSI.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-farsi',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE, left-right
+    '!'        #  0x21 -> EXCLAMATION MARK, left-right
+    '"'        #  0x22 -> QUOTATION MARK, left-right
+    '#'        #  0x23 -> NUMBER SIGN, left-right
+    '$'        #  0x24 -> DOLLAR SIGN, left-right
+    '%'        #  0x25 -> PERCENT SIGN, left-right
+    '&'        #  0x26 -> AMPERSAND, left-right
+    "'"        #  0x27 -> APOSTROPHE, left-right
+    '('        #  0x28 -> LEFT PARENTHESIS, left-right
+    ')'        #  0x29 -> RIGHT PARENTHESIS, left-right
+    '*'        #  0x2A -> ASTERISK, left-right
+    '+'        #  0x2B -> PLUS SIGN, left-right
+    ','        #  0x2C -> COMMA, left-right; in Arabic-script context, displayed as 0x066C ARABIC THOUSANDS SEPARATOR
+    '-'        #  0x2D -> HYPHEN-MINUS, left-right
+    '.'        #  0x2E -> FULL STOP, left-right; in Arabic-script context, displayed as 0x066B ARABIC DECIMAL SEPARATOR
+    '/'        #  0x2F -> SOLIDUS, left-right
+    '0'        #  0x30 -> DIGIT ZERO;  in Arabic-script context, displayed as 0x06F0 EXTENDED ARABIC-INDIC DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE;   in Arabic-script context, displayed as 0x06F1 EXTENDED ARABIC-INDIC DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO;   in Arabic-script context, displayed as 0x06F2 EXTENDED ARABIC-INDIC DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE; in Arabic-script context, displayed as 0x06F3 EXTENDED ARABIC-INDIC DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR;  in Arabic-script context, displayed as 0x06F4 EXTENDED ARABIC-INDIC DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE;  in Arabic-script context, displayed as 0x06F5 EXTENDED ARABIC-INDIC DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX;   in Arabic-script context, displayed as 0x06F6 EXTENDED ARABIC-INDIC DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN; in Arabic-script context, displayed as 0x06F7 EXTENDED ARABIC-INDIC DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT; in Arabic-script context, displayed as 0x06F8 EXTENDED ARABIC-INDIC DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE;  in Arabic-script context, displayed as 0x06F9 EXTENDED ARABIC-INDIC DIGIT NINE
+    ':'        #  0x3A -> COLON, left-right
+    ';'        #  0x3B -> SEMICOLON, left-right
+    '<'        #  0x3C -> LESS-THAN SIGN, left-right
+    '='        #  0x3D -> EQUALS SIGN, left-right
+    '>'        #  0x3E -> GREATER-THAN SIGN, left-right
+    '?'        #  0x3F -> QUESTION MARK, left-right
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET, left-right
+    '\\'       #  0x5C -> REVERSE SOLIDUS, left-right
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET, left-right
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT, left-right
+    '_'        #  0x5F -> LOW LINE, left-right
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET, left-right
+    '|'        #  0x7C -> VERTICAL LINE, left-right
+    '}'        #  0x7D -> RIGHT CURLY BRACKET, left-right
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xa0'     #  0x81 -> NO-BREAK SPACE, right-left
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u06ba'   #  0x8B -> ARABIC LETTER NOON GHUNNA
+    '\xab'     #  0x8C -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\u2026'   #  0x93 -> HORIZONTAL ELLIPSIS, right-left
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xbb'     #  0x98 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK, right-left
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0x9B -> DIVISION SIGN, right-left
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    ' '        #  0xA0 -> SPACE, right-left
+    '!'        #  0xA1 -> EXCLAMATION MARK, right-left
+    '"'        #  0xA2 -> QUOTATION MARK, right-left
+    '#'        #  0xA3 -> NUMBER SIGN, right-left
+    '$'        #  0xA4 -> DOLLAR SIGN, right-left
+    '\u066a'   #  0xA5 -> ARABIC PERCENT SIGN
+    '&'        #  0xA6 -> AMPERSAND, right-left
+    "'"        #  0xA7 -> APOSTROPHE, right-left
+    '('        #  0xA8 -> LEFT PARENTHESIS, right-left
+    ')'        #  0xA9 -> RIGHT PARENTHESIS, right-left
+    '*'        #  0xAA -> ASTERISK, right-left
+    '+'        #  0xAB -> PLUS SIGN, right-left
+    '\u060c'   #  0xAC -> ARABIC COMMA
+    '-'        #  0xAD -> HYPHEN-MINUS, right-left
+    '.'        #  0xAE -> FULL STOP, right-left
+    '/'        #  0xAF -> SOLIDUS, right-left
+    '\u06f0'   #  0xB0 -> EXTENDED ARABIC-INDIC DIGIT ZERO, right-left (need override)
+    '\u06f1'   #  0xB1 -> EXTENDED ARABIC-INDIC DIGIT ONE, right-left (need override)
+    '\u06f2'   #  0xB2 -> EXTENDED ARABIC-INDIC DIGIT TWO, right-left (need override)
+    '\u06f3'   #  0xB3 -> EXTENDED ARABIC-INDIC DIGIT THREE, right-left (need override)
+    '\u06f4'   #  0xB4 -> EXTENDED ARABIC-INDIC DIGIT FOUR, right-left (need override)
+    '\u06f5'   #  0xB5 -> EXTENDED ARABIC-INDIC DIGIT FIVE, right-left (need override)
+    '\u06f6'   #  0xB6 -> EXTENDED ARABIC-INDIC DIGIT SIX, right-left (need override)
+    '\u06f7'   #  0xB7 -> EXTENDED ARABIC-INDIC DIGIT SEVEN, right-left (need override)
+    '\u06f8'   #  0xB8 -> EXTENDED ARABIC-INDIC DIGIT EIGHT, right-left (need override)
+    '\u06f9'   #  0xB9 -> EXTENDED ARABIC-INDIC DIGIT NINE, right-left (need override)
+    ':'        #  0xBA -> COLON, right-left
+    '\u061b'   #  0xBB -> ARABIC SEMICOLON
+    '<'        #  0xBC -> LESS-THAN SIGN, right-left
+    '='        #  0xBD -> EQUALS SIGN, right-left
+    '>'        #  0xBE -> GREATER-THAN SIGN, right-left
+    '\u061f'   #  0xBF -> ARABIC QUESTION MARK
+    '\u274a'   #  0xC0 -> EIGHT TEARDROP-SPOKED PROPELLER ASTERISK, right-left
+    '\u0621'   #  0xC1 -> ARABIC LETTER HAMZA
+    '\u0622'   #  0xC2 -> ARABIC LETTER ALEF WITH MADDA ABOVE
+    '\u0623'   #  0xC3 -> ARABIC LETTER ALEF WITH HAMZA ABOVE
+    '\u0624'   #  0xC4 -> ARABIC LETTER WAW WITH HAMZA ABOVE
+    '\u0625'   #  0xC5 -> ARABIC LETTER ALEF WITH HAMZA BELOW
+    '\u0626'   #  0xC6 -> ARABIC LETTER YEH WITH HAMZA ABOVE
+    '\u0627'   #  0xC7 -> ARABIC LETTER ALEF
+    '\u0628'   #  0xC8 -> ARABIC LETTER BEH
+    '\u0629'   #  0xC9 -> ARABIC LETTER TEH MARBUTA
+    '\u062a'   #  0xCA -> ARABIC LETTER TEH
+    '\u062b'   #  0xCB -> ARABIC LETTER THEH
+    '\u062c'   #  0xCC -> ARABIC LETTER JEEM
+    '\u062d'   #  0xCD -> ARABIC LETTER HAH
+    '\u062e'   #  0xCE -> ARABIC LETTER KHAH
+    '\u062f'   #  0xCF -> ARABIC LETTER DAL
+    '\u0630'   #  0xD0 -> ARABIC LETTER THAL
+    '\u0631'   #  0xD1 -> ARABIC LETTER REH
+    '\u0632'   #  0xD2 -> ARABIC LETTER ZAIN
+    '\u0633'   #  0xD3 -> ARABIC LETTER SEEN
+    '\u0634'   #  0xD4 -> ARABIC LETTER SHEEN
+    '\u0635'   #  0xD5 -> ARABIC LETTER SAD
+    '\u0636'   #  0xD6 -> ARABIC LETTER DAD
+    '\u0637'   #  0xD7 -> ARABIC LETTER TAH
+    '\u0638'   #  0xD8 -> ARABIC LETTER ZAH
+    '\u0639'   #  0xD9 -> ARABIC LETTER AIN
+    '\u063a'   #  0xDA -> ARABIC LETTER GHAIN
+    '['        #  0xDB -> LEFT SQUARE BRACKET, right-left
+    '\\'       #  0xDC -> REVERSE SOLIDUS, right-left
+    ']'        #  0xDD -> RIGHT SQUARE BRACKET, right-left
+    '^'        #  0xDE -> CIRCUMFLEX ACCENT, right-left
+    '_'        #  0xDF -> LOW LINE, right-left
+    '\u0640'   #  0xE0 -> ARABIC TATWEEL
+    '\u0641'   #  0xE1 -> ARABIC LETTER FEH
+    '\u0642'   #  0xE2 -> ARABIC LETTER QAF
+    '\u0643'   #  0xE3 -> ARABIC LETTER KAF
+    '\u0644'   #  0xE4 -> ARABIC LETTER LAM
+    '\u0645'   #  0xE5 -> ARABIC LETTER MEEM
+    '\u0646'   #  0xE6 -> ARABIC LETTER NOON
+    '\u0647'   #  0xE7 -> ARABIC LETTER HEH
+    '\u0648'   #  0xE8 -> ARABIC LETTER WAW
+    '\u0649'   #  0xE9 -> ARABIC LETTER ALEF MAKSURA
+    '\u064a'   #  0xEA -> ARABIC LETTER YEH
+    '\u064b'   #  0xEB -> ARABIC FATHATAN
+    '\u064c'   #  0xEC -> ARABIC DAMMATAN
+    '\u064d'   #  0xED -> ARABIC KASRATAN
+    '\u064e'   #  0xEE -> ARABIC FATHA
+    '\u064f'   #  0xEF -> ARABIC DAMMA
+    '\u0650'   #  0xF0 -> ARABIC KASRA
+    '\u0651'   #  0xF1 -> ARABIC SHADDA
+    '\u0652'   #  0xF2 -> ARABIC SUKUN
+    '\u067e'   #  0xF3 -> ARABIC LETTER PEH
+    '\u0679'   #  0xF4 -> ARABIC LETTER TTEH
+    '\u0686'   #  0xF5 -> ARABIC LETTER TCHEH
+    '\u06d5'   #  0xF6 -> ARABIC LETTER AE
+    '\u06a4'   #  0xF7 -> ARABIC LETTER VEH
+    '\u06af'   #  0xF8 -> ARABIC LETTER GAF
+    '\u0688'   #  0xF9 -> ARABIC LETTER DDAL
+    '\u0691'   #  0xFA -> ARABIC LETTER RREH
+    '{'        #  0xFB -> LEFT CURLY BRACKET, right-left
+    '|'        #  0xFC -> VERTICAL LINE, right-left
+    '}'        #  0xFD -> RIGHT CURLY BRACKET, right-left
+    '\u0698'   #  0xFE -> ARABIC LETTER JEH
+    '\u06d2'   #  0xFF -> ARABIC LETTER YEH BARREE
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_greek.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_greek.py
new file mode 100644
index 0000000000000000000000000000000000000000..d3d0c4f0c38755072250d81edd0b3145f1806331
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_greek.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_greek generated from 'MAPPINGS/VENDORS/APPLE/GREEK.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-greek',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xb9'     #  0x81 -> SUPERSCRIPT ONE
+    '\xb2'     #  0x82 -> SUPERSCRIPT TWO
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xb3'     #  0x84 -> SUPERSCRIPT THREE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\u0385'   #  0x87 -> GREEK DIALYTIKA TONOS
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u0384'   #  0x8B -> GREEK TONOS
+    '\xa8'     #  0x8C -> DIAERESIS
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xa3'     #  0x92 -> POUND SIGN
+    '\u2122'   #  0x93 -> TRADE MARK SIGN
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\u2022'   #  0x96 -> BULLET
+    '\xbd'     #  0x97 -> VULGAR FRACTION ONE HALF
+    '\u2030'   #  0x98 -> PER MILLE SIGN
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xa6'     #  0x9B -> BROKEN BAR
+    '\u20ac'   #  0x9C -> EURO SIGN # before Mac OS 9.2.2, was SOFT HYPHEN
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\u0393'   #  0xA1 -> GREEK CAPITAL LETTER GAMMA
+    '\u0394'   #  0xA2 -> GREEK CAPITAL LETTER DELTA
+    '\u0398'   #  0xA3 -> GREEK CAPITAL LETTER THETA
+    '\u039b'   #  0xA4 -> GREEK CAPITAL LETTER LAMDA
+    '\u039e'   #  0xA5 -> GREEK CAPITAL LETTER XI
+    '\u03a0'   #  0xA6 -> GREEK CAPITAL LETTER PI
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u03a3'   #  0xAA -> GREEK CAPITAL LETTER SIGMA
+    '\u03aa'   #  0xAB -> GREEK CAPITAL LETTER IOTA WITH DIALYTIKA
+    '\xa7'     #  0xAC -> SECTION SIGN
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\xb0'     #  0xAE -> DEGREE SIGN
+    '\xb7'     #  0xAF -> MIDDLE DOT
+    '\u0391'   #  0xB0 -> GREEK CAPITAL LETTER ALPHA
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\xa5'     #  0xB4 -> YEN SIGN
+    '\u0392'   #  0xB5 -> GREEK CAPITAL LETTER BETA
+    '\u0395'   #  0xB6 -> GREEK CAPITAL LETTER EPSILON
+    '\u0396'   #  0xB7 -> GREEK CAPITAL LETTER ZETA
+    '\u0397'   #  0xB8 -> GREEK CAPITAL LETTER ETA
+    '\u0399'   #  0xB9 -> GREEK CAPITAL LETTER IOTA
+    '\u039a'   #  0xBA -> GREEK CAPITAL LETTER KAPPA
+    '\u039c'   #  0xBB -> GREEK CAPITAL LETTER MU
+    '\u03a6'   #  0xBC -> GREEK CAPITAL LETTER PHI
+    '\u03ab'   #  0xBD -> GREEK CAPITAL LETTER UPSILON WITH DIALYTIKA
+    '\u03a8'   #  0xBE -> GREEK CAPITAL LETTER PSI
+    '\u03a9'   #  0xBF -> GREEK CAPITAL LETTER OMEGA
+    '\u03ac'   #  0xC0 -> GREEK SMALL LETTER ALPHA WITH TONOS
+    '\u039d'   #  0xC1 -> GREEK CAPITAL LETTER NU
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u039f'   #  0xC3 -> GREEK CAPITAL LETTER OMICRON
+    '\u03a1'   #  0xC4 -> GREEK CAPITAL LETTER RHO
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u03a4'   #  0xC6 -> GREEK CAPITAL LETTER TAU
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\u03a5'   #  0xCB -> GREEK CAPITAL LETTER UPSILON
+    '\u03a7'   #  0xCC -> GREEK CAPITAL LETTER CHI
+    '\u0386'   #  0xCD -> GREEK CAPITAL LETTER ALPHA WITH TONOS
+    '\u0388'   #  0xCE -> GREEK CAPITAL LETTER EPSILON WITH TONOS
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2015'   #  0xD1 -> HORIZONTAL BAR
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u0389'   #  0xD7 -> GREEK CAPITAL LETTER ETA WITH TONOS
+    '\u038a'   #  0xD8 -> GREEK CAPITAL LETTER IOTA WITH TONOS
+    '\u038c'   #  0xD9 -> GREEK CAPITAL LETTER OMICRON WITH TONOS
+    '\u038e'   #  0xDA -> GREEK CAPITAL LETTER UPSILON WITH TONOS
+    '\u03ad'   #  0xDB -> GREEK SMALL LETTER EPSILON WITH TONOS
+    '\u03ae'   #  0xDC -> GREEK SMALL LETTER ETA WITH TONOS
+    '\u03af'   #  0xDD -> GREEK SMALL LETTER IOTA WITH TONOS
+    '\u03cc'   #  0xDE -> GREEK SMALL LETTER OMICRON WITH TONOS
+    '\u038f'   #  0xDF -> GREEK CAPITAL LETTER OMEGA WITH TONOS
+    '\u03cd'   #  0xE0 -> GREEK SMALL LETTER UPSILON WITH TONOS
+    '\u03b1'   #  0xE1 -> GREEK SMALL LETTER ALPHA
+    '\u03b2'   #  0xE2 -> GREEK SMALL LETTER BETA
+    '\u03c8'   #  0xE3 -> GREEK SMALL LETTER PSI
+    '\u03b4'   #  0xE4 -> GREEK SMALL LETTER DELTA
+    '\u03b5'   #  0xE5 -> GREEK SMALL LETTER EPSILON
+    '\u03c6'   #  0xE6 -> GREEK SMALL LETTER PHI
+    '\u03b3'   #  0xE7 -> GREEK SMALL LETTER GAMMA
+    '\u03b7'   #  0xE8 -> GREEK SMALL LETTER ETA
+    '\u03b9'   #  0xE9 -> GREEK SMALL LETTER IOTA
+    '\u03be'   #  0xEA -> GREEK SMALL LETTER XI
+    '\u03ba'   #  0xEB -> GREEK SMALL LETTER KAPPA
+    '\u03bb'   #  0xEC -> GREEK SMALL LETTER LAMDA
+    '\u03bc'   #  0xED -> GREEK SMALL LETTER MU
+    '\u03bd'   #  0xEE -> GREEK SMALL LETTER NU
+    '\u03bf'   #  0xEF -> GREEK SMALL LETTER OMICRON
+    '\u03c0'   #  0xF0 -> GREEK SMALL LETTER PI
+    '\u03ce'   #  0xF1 -> GREEK SMALL LETTER OMEGA WITH TONOS
+    '\u03c1'   #  0xF2 -> GREEK SMALL LETTER RHO
+    '\u03c3'   #  0xF3 -> GREEK SMALL LETTER SIGMA
+    '\u03c4'   #  0xF4 -> GREEK SMALL LETTER TAU
+    '\u03b8'   #  0xF5 -> GREEK SMALL LETTER THETA
+    '\u03c9'   #  0xF6 -> GREEK SMALL LETTER OMEGA
+    '\u03c2'   #  0xF7 -> GREEK SMALL LETTER FINAL SIGMA
+    '\u03c7'   #  0xF8 -> GREEK SMALL LETTER CHI
+    '\u03c5'   #  0xF9 -> GREEK SMALL LETTER UPSILON
+    '\u03b6'   #  0xFA -> GREEK SMALL LETTER ZETA
+    '\u03ca'   #  0xFB -> GREEK SMALL LETTER IOTA WITH DIALYTIKA
+    '\u03cb'   #  0xFC -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA
+    '\u0390'   #  0xFD -> GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    '\u03b0'   #  0xFE -> GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    '\xad'     #  0xFF -> SOFT HYPHEN # before Mac OS 9.2.2, was undefined
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_iceland.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_iceland.py
new file mode 100644
index 0000000000000000000000000000000000000000..add10f4e555ff2779e50a1cef035a7a733beefc1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_iceland.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_iceland generated from 'MAPPINGS/VENDORS/APPLE/ICELAND.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-iceland',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x81 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe3'     #  0x8B -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x8C -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xec'     #  0x93 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf2'     #  0x98 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xA0 -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\xb4'     #  0xAB -> ACUTE ACCENT
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\xc6'     #  0xAE -> LATIN CAPITAL LETTER AE
+    '\xd8'     #  0xAF -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\xa5'     #  0xB4 -> YEN SIGN
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u220f'   #  0xB8 -> N-ARY PRODUCT
+    '\u03c0'   #  0xB9 -> GREEK SMALL LETTER PI
+    '\u222b'   #  0xBA -> INTEGRAL
+    '\xaa'     #  0xBB -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xBC -> MASCULINE ORDINAL INDICATOR
+    '\u03a9'   #  0xBD -> GREEK CAPITAL LETTER OMEGA
+    '\xe6'     #  0xBE -> LATIN SMALL LETTER AE
+    '\xf8'     #  0xBF -> LATIN SMALL LETTER O WITH STROKE
+    '\xbf'     #  0xC0 -> INVERTED QUESTION MARK
+    '\xa1'     #  0xC1 -> INVERTED EXCLAMATION MARK
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\xc0'     #  0xCB -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc3'     #  0xCC -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0152'   #  0xCE -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\xff'     #  0xD8 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\u0178'   #  0xD9 -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u2044'   #  0xDA -> FRACTION SLASH
+    '\u20ac'   #  0xDB -> EURO SIGN
+    '\xd0'     #  0xDC -> LATIN CAPITAL LETTER ETH
+    '\xf0'     #  0xDD -> LATIN SMALL LETTER ETH
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN
+    '\xfe'     #  0xDF -> LATIN SMALL LETTER THORN
+    '\xfd'     #  0xE0 -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xb7'     #  0xE1 -> MIDDLE DOT
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2030'   #  0xE4 -> PER MILLE SIGN
+    '\xc2'     #  0xE5 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xca'     #  0xE6 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xcb'     #  0xE8 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0xE9 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xEB -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xEC -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0xED -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\uf8ff'   #  0xF0 -> Apple logo
+    '\xd2'     #  0xF1 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xF3 -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0xF4 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\u0131'   #  0xF5 -> LATIN SMALL LETTER DOTLESS I
+    '\u02c6'   #  0xF6 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u02dc'   #  0xF7 -> SMALL TILDE
+    '\xaf'     #  0xF8 -> MACRON
+    '\u02d8'   #  0xF9 -> BREVE
+    '\u02d9'   #  0xFA -> DOT ABOVE
+    '\u02da'   #  0xFB -> RING ABOVE
+    '\xb8'     #  0xFC -> CEDILLA
+    '\u02dd'   #  0xFD -> DOUBLE ACUTE ACCENT
+    '\u02db'   #  0xFE -> OGONEK
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_latin2.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_latin2.py
new file mode 100644
index 0000000000000000000000000000000000000000..da9d4b134ade7721535354bd50c9f809d4535017
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_latin2.py
@@ -0,0 +1,312 @@
+""" Python Character Mapping Codec mac_latin2 generated from 'MAPPINGS/VENDORS/MICSFT/MAC/LATIN2.TXT' with gencodec.py.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+(c) Copyright 2000 Guido van Rossum.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-latin2',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\u0100'   #  0x81 -> LATIN CAPITAL LETTER A WITH MACRON
+    '\u0101'   #  0x82 -> LATIN SMALL LETTER A WITH MACRON
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\u0104'   #  0x84 -> LATIN CAPITAL LETTER A WITH OGONEK
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\u0105'   #  0x88 -> LATIN SMALL LETTER A WITH OGONEK
+    '\u010c'   #  0x89 -> LATIN CAPITAL LETTER C WITH CARON
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\u010d'   #  0x8B -> LATIN SMALL LETTER C WITH CARON
+    '\u0106'   #  0x8C -> LATIN CAPITAL LETTER C WITH ACUTE
+    '\u0107'   #  0x8D -> LATIN SMALL LETTER C WITH ACUTE
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\u0179'   #  0x8F -> LATIN CAPITAL LETTER Z WITH ACUTE
+    '\u017a'   #  0x90 -> LATIN SMALL LETTER Z WITH ACUTE
+    '\u010e'   #  0x91 -> LATIN CAPITAL LETTER D WITH CARON
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\u010f'   #  0x93 -> LATIN SMALL LETTER D WITH CARON
+    '\u0112'   #  0x94 -> LATIN CAPITAL LETTER E WITH MACRON
+    '\u0113'   #  0x95 -> LATIN SMALL LETTER E WITH MACRON
+    '\u0116'   #  0x96 -> LATIN CAPITAL LETTER E WITH DOT ABOVE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\u0117'   #  0x98 -> LATIN SMALL LETTER E WITH DOT ABOVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\u011a'   #  0x9D -> LATIN CAPITAL LETTER E WITH CARON
+    '\u011b'   #  0x9E -> LATIN SMALL LETTER E WITH CARON
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\u0118'   #  0xA2 -> LATIN CAPITAL LETTER E WITH OGONEK
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\u0119'   #  0xAB -> LATIN SMALL LETTER E WITH OGONEK
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\u0123'   #  0xAE -> LATIN SMALL LETTER G WITH CEDILLA
+    '\u012e'   #  0xAF -> LATIN CAPITAL LETTER I WITH OGONEK
+    '\u012f'   #  0xB0 -> LATIN SMALL LETTER I WITH OGONEK
+    '\u012a'   #  0xB1 -> LATIN CAPITAL LETTER I WITH MACRON
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\u012b'   #  0xB4 -> LATIN SMALL LETTER I WITH MACRON
+    '\u0136'   #  0xB5 -> LATIN CAPITAL LETTER K WITH CEDILLA
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u0142'   #  0xB8 -> LATIN SMALL LETTER L WITH STROKE
+    '\u013b'   #  0xB9 -> LATIN CAPITAL LETTER L WITH CEDILLA
+    '\u013c'   #  0xBA -> LATIN SMALL LETTER L WITH CEDILLA
+    '\u013d'   #  0xBB -> LATIN CAPITAL LETTER L WITH CARON
+    '\u013e'   #  0xBC -> LATIN SMALL LETTER L WITH CARON
+    '\u0139'   #  0xBD -> LATIN CAPITAL LETTER L WITH ACUTE
+    '\u013a'   #  0xBE -> LATIN SMALL LETTER L WITH ACUTE
+    '\u0145'   #  0xBF -> LATIN CAPITAL LETTER N WITH CEDILLA
+    '\u0146'   #  0xC0 -> LATIN SMALL LETTER N WITH CEDILLA
+    '\u0143'   #  0xC1 -> LATIN CAPITAL LETTER N WITH ACUTE
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0144'   #  0xC4 -> LATIN SMALL LETTER N WITH ACUTE
+    '\u0147'   #  0xC5 -> LATIN CAPITAL LETTER N WITH CARON
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\u0148'   #  0xCB -> LATIN SMALL LETTER N WITH CARON
+    '\u0150'   #  0xCC -> LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0151'   #  0xCE -> LATIN SMALL LETTER O WITH DOUBLE ACUTE
+    '\u014c'   #  0xCF -> LATIN CAPITAL LETTER O WITH MACRON
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\u014d'   #  0xD8 -> LATIN SMALL LETTER O WITH MACRON
+    '\u0154'   #  0xD9 -> LATIN CAPITAL LETTER R WITH ACUTE
+    '\u0155'   #  0xDA -> LATIN SMALL LETTER R WITH ACUTE
+    '\u0158'   #  0xDB -> LATIN CAPITAL LETTER R WITH CARON
+    '\u2039'   #  0xDC -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u203a'   #  0xDD -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0159'   #  0xDE -> LATIN SMALL LETTER R WITH CARON
+    '\u0156'   #  0xDF -> LATIN CAPITAL LETTER R WITH CEDILLA
+    '\u0157'   #  0xE0 -> LATIN SMALL LETTER R WITH CEDILLA
+    '\u0160'   #  0xE1 -> LATIN CAPITAL LETTER S WITH CARON
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u0161'   #  0xE4 -> LATIN SMALL LETTER S WITH CARON
+    '\u015a'   #  0xE5 -> LATIN CAPITAL LETTER S WITH ACUTE
+    '\u015b'   #  0xE6 -> LATIN SMALL LETTER S WITH ACUTE
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\u0164'   #  0xE8 -> LATIN CAPITAL LETTER T WITH CARON
+    '\u0165'   #  0xE9 -> LATIN SMALL LETTER T WITH CARON
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\u017d'   #  0xEB -> LATIN CAPITAL LETTER Z WITH CARON
+    '\u017e'   #  0xEC -> LATIN SMALL LETTER Z WITH CARON
+    '\u016a'   #  0xED -> LATIN CAPITAL LETTER U WITH MACRON
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\u016b'   #  0xF0 -> LATIN SMALL LETTER U WITH MACRON
+    '\u016e'   #  0xF1 -> LATIN CAPITAL LETTER U WITH RING ABOVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\u016f'   #  0xF3 -> LATIN SMALL LETTER U WITH RING ABOVE
+    '\u0170'   #  0xF4 -> LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
+    '\u0171'   #  0xF5 -> LATIN SMALL LETTER U WITH DOUBLE ACUTE
+    '\u0172'   #  0xF6 -> LATIN CAPITAL LETTER U WITH OGONEK
+    '\u0173'   #  0xF7 -> LATIN SMALL LETTER U WITH OGONEK
+    '\xdd'     #  0xF8 -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xfd'     #  0xF9 -> LATIN SMALL LETTER Y WITH ACUTE
+    '\u0137'   #  0xFA -> LATIN SMALL LETTER K WITH CEDILLA
+    '\u017b'   #  0xFB -> LATIN CAPITAL LETTER Z WITH DOT ABOVE
+    '\u0141'   #  0xFC -> LATIN CAPITAL LETTER L WITH STROKE
+    '\u017c'   #  0xFD -> LATIN SMALL LETTER Z WITH DOT ABOVE
+    '\u0122'   #  0xFE -> LATIN CAPITAL LETTER G WITH CEDILLA
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_roman.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_roman.py
new file mode 100644
index 0000000000000000000000000000000000000000..b74b002134fa0b245239d4890971e70b25955846
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_roman.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_roman generated from 'MAPPINGS/VENDORS/APPLE/ROMAN.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-roman',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x81 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe3'     #  0x8B -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x8C -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xec'     #  0x93 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf2'     #  0x98 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\xb4'     #  0xAB -> ACUTE ACCENT
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\xc6'     #  0xAE -> LATIN CAPITAL LETTER AE
+    '\xd8'     #  0xAF -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\xa5'     #  0xB4 -> YEN SIGN
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u220f'   #  0xB8 -> N-ARY PRODUCT
+    '\u03c0'   #  0xB9 -> GREEK SMALL LETTER PI
+    '\u222b'   #  0xBA -> INTEGRAL
+    '\xaa'     #  0xBB -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xBC -> MASCULINE ORDINAL INDICATOR
+    '\u03a9'   #  0xBD -> GREEK CAPITAL LETTER OMEGA
+    '\xe6'     #  0xBE -> LATIN SMALL LETTER AE
+    '\xf8'     #  0xBF -> LATIN SMALL LETTER O WITH STROKE
+    '\xbf'     #  0xC0 -> INVERTED QUESTION MARK
+    '\xa1'     #  0xC1 -> INVERTED EXCLAMATION MARK
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\xc0'     #  0xCB -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc3'     #  0xCC -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0152'   #  0xCE -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\xff'     #  0xD8 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\u0178'   #  0xD9 -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u2044'   #  0xDA -> FRACTION SLASH
+    '\u20ac'   #  0xDB -> EURO SIGN
+    '\u2039'   #  0xDC -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u203a'   #  0xDD -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\ufb01'   #  0xDE -> LATIN SMALL LIGATURE FI
+    '\ufb02'   #  0xDF -> LATIN SMALL LIGATURE FL
+    '\u2021'   #  0xE0 -> DOUBLE DAGGER
+    '\xb7'     #  0xE1 -> MIDDLE DOT
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2030'   #  0xE4 -> PER MILLE SIGN
+    '\xc2'     #  0xE5 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xca'     #  0xE6 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xcb'     #  0xE8 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0xE9 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xEB -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xEC -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0xED -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\uf8ff'   #  0xF0 -> Apple logo
+    '\xd2'     #  0xF1 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xF3 -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0xF4 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\u0131'   #  0xF5 -> LATIN SMALL LETTER DOTLESS I
+    '\u02c6'   #  0xF6 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u02dc'   #  0xF7 -> SMALL TILDE
+    '\xaf'     #  0xF8 -> MACRON
+    '\u02d8'   #  0xF9 -> BREVE
+    '\u02d9'   #  0xFA -> DOT ABOVE
+    '\u02da'   #  0xFB -> RING ABOVE
+    '\xb8'     #  0xFC -> CEDILLA
+    '\u02dd'   #  0xFD -> DOUBLE ACUTE ACCENT
+    '\u02db'   #  0xFE -> OGONEK
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_romanian.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_romanian.py
new file mode 100644
index 0000000000000000000000000000000000000000..d141b4c50912523464e187032cd90cca944cef4b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_romanian.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_romanian generated from 'MAPPINGS/VENDORS/APPLE/ROMANIAN.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-romanian',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x81 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe3'     #  0x8B -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x8C -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xec'     #  0x93 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf2'     #  0x98 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\xb4'     #  0xAB -> ACUTE ACCENT
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\u0102'   #  0xAE -> LATIN CAPITAL LETTER A WITH BREVE
+    '\u0218'   #  0xAF -> LATIN CAPITAL LETTER S WITH COMMA BELOW # for Unicode 3.0 and later
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\xa5'     #  0xB4 -> YEN SIGN
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u220f'   #  0xB8 -> N-ARY PRODUCT
+    '\u03c0'   #  0xB9 -> GREEK SMALL LETTER PI
+    '\u222b'   #  0xBA -> INTEGRAL
+    '\xaa'     #  0xBB -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xBC -> MASCULINE ORDINAL INDICATOR
+    '\u03a9'   #  0xBD -> GREEK CAPITAL LETTER OMEGA
+    '\u0103'   #  0xBE -> LATIN SMALL LETTER A WITH BREVE
+    '\u0219'   #  0xBF -> LATIN SMALL LETTER S WITH COMMA BELOW # for Unicode 3.0 and later
+    '\xbf'     #  0xC0 -> INVERTED QUESTION MARK
+    '\xa1'     #  0xC1 -> INVERTED EXCLAMATION MARK
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\xc0'     #  0xCB -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc3'     #  0xCC -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0152'   #  0xCE -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\xff'     #  0xD8 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\u0178'   #  0xD9 -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u2044'   #  0xDA -> FRACTION SLASH
+    '\u20ac'   #  0xDB -> EURO SIGN
+    '\u2039'   #  0xDC -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u203a'   #  0xDD -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u021a'   #  0xDE -> LATIN CAPITAL LETTER T WITH COMMA BELOW # for Unicode 3.0 and later
+    '\u021b'   #  0xDF -> LATIN SMALL LETTER T WITH COMMA BELOW # for Unicode 3.0 and later
+    '\u2021'   #  0xE0 -> DOUBLE DAGGER
+    '\xb7'     #  0xE1 -> MIDDLE DOT
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2030'   #  0xE4 -> PER MILLE SIGN
+    '\xc2'     #  0xE5 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xca'     #  0xE6 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xcb'     #  0xE8 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0xE9 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xEB -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xEC -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0xED -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\uf8ff'   #  0xF0 -> Apple logo
+    '\xd2'     #  0xF1 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xF3 -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0xF4 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\u0131'   #  0xF5 -> LATIN SMALL LETTER DOTLESS I
+    '\u02c6'   #  0xF6 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u02dc'   #  0xF7 -> SMALL TILDE
+    '\xaf'     #  0xF8 -> MACRON
+    '\u02d8'   #  0xF9 -> BREVE
+    '\u02d9'   #  0xFA -> DOT ABOVE
+    '\u02da'   #  0xFB -> RING ABOVE
+    '\xb8'     #  0xFC -> CEDILLA
+    '\u02dd'   #  0xFD -> DOUBLE ACUTE ACCENT
+    '\u02db'   #  0xFE -> OGONEK
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_turkish.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_turkish.py
new file mode 100644
index 0000000000000000000000000000000000000000..044d4cb5ad7b30375b873624c2c4163c56194120
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mac_turkish.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec mac_turkish generated from 'MAPPINGS/VENDORS/APPLE/TURKISH.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mac-turkish',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> CONTROL CHARACTER
+    '\x01'     #  0x01 -> CONTROL CHARACTER
+    '\x02'     #  0x02 -> CONTROL CHARACTER
+    '\x03'     #  0x03 -> CONTROL CHARACTER
+    '\x04'     #  0x04 -> CONTROL CHARACTER
+    '\x05'     #  0x05 -> CONTROL CHARACTER
+    '\x06'     #  0x06 -> CONTROL CHARACTER
+    '\x07'     #  0x07 -> CONTROL CHARACTER
+    '\x08'     #  0x08 -> CONTROL CHARACTER
+    '\t'       #  0x09 -> CONTROL CHARACTER
+    '\n'       #  0x0A -> CONTROL CHARACTER
+    '\x0b'     #  0x0B -> CONTROL CHARACTER
+    '\x0c'     #  0x0C -> CONTROL CHARACTER
+    '\r'       #  0x0D -> CONTROL CHARACTER
+    '\x0e'     #  0x0E -> CONTROL CHARACTER
+    '\x0f'     #  0x0F -> CONTROL CHARACTER
+    '\x10'     #  0x10 -> CONTROL CHARACTER
+    '\x11'     #  0x11 -> CONTROL CHARACTER
+    '\x12'     #  0x12 -> CONTROL CHARACTER
+    '\x13'     #  0x13 -> CONTROL CHARACTER
+    '\x14'     #  0x14 -> CONTROL CHARACTER
+    '\x15'     #  0x15 -> CONTROL CHARACTER
+    '\x16'     #  0x16 -> CONTROL CHARACTER
+    '\x17'     #  0x17 -> CONTROL CHARACTER
+    '\x18'     #  0x18 -> CONTROL CHARACTER
+    '\x19'     #  0x19 -> CONTROL CHARACTER
+    '\x1a'     #  0x1A -> CONTROL CHARACTER
+    '\x1b'     #  0x1B -> CONTROL CHARACTER
+    '\x1c'     #  0x1C -> CONTROL CHARACTER
+    '\x1d'     #  0x1D -> CONTROL CHARACTER
+    '\x1e'     #  0x1E -> CONTROL CHARACTER
+    '\x1f'     #  0x1F -> CONTROL CHARACTER
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> CONTROL CHARACTER
+    '\xc4'     #  0x80 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0x81 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc7'     #  0x82 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc9'     #  0x83 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xd1'     #  0x84 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd6'     #  0x85 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xdc'     #  0x86 -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xe1'     #  0x87 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe0'     #  0x88 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe2'     #  0x89 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe4'     #  0x8A -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe3'     #  0x8B -> LATIN SMALL LETTER A WITH TILDE
+    '\xe5'     #  0x8C -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe7'     #  0x8D -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe9'     #  0x8E -> LATIN SMALL LETTER E WITH ACUTE
+    '\xe8'     #  0x8F -> LATIN SMALL LETTER E WITH GRAVE
+    '\xea'     #  0x90 -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0x91 -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xed'     #  0x92 -> LATIN SMALL LETTER I WITH ACUTE
+    '\xec'     #  0x93 -> LATIN SMALL LETTER I WITH GRAVE
+    '\xee'     #  0x94 -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0x95 -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf1'     #  0x96 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf3'     #  0x97 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf2'     #  0x98 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf4'     #  0x99 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf6'     #  0x9A -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf5'     #  0x9B -> LATIN SMALL LETTER O WITH TILDE
+    '\xfa'     #  0x9C -> LATIN SMALL LETTER U WITH ACUTE
+    '\xf9'     #  0x9D -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfb'     #  0x9E -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0x9F -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\u2020'   #  0xA0 -> DAGGER
+    '\xb0'     #  0xA1 -> DEGREE SIGN
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa7'     #  0xA4 -> SECTION SIGN
+    '\u2022'   #  0xA5 -> BULLET
+    '\xb6'     #  0xA6 -> PILCROW SIGN
+    '\xdf'     #  0xA7 -> LATIN SMALL LETTER SHARP S
+    '\xae'     #  0xA8 -> REGISTERED SIGN
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u2122'   #  0xAA -> TRADE MARK SIGN
+    '\xb4'     #  0xAB -> ACUTE ACCENT
+    '\xa8'     #  0xAC -> DIAERESIS
+    '\u2260'   #  0xAD -> NOT EQUAL TO
+    '\xc6'     #  0xAE -> LATIN CAPITAL LETTER AE
+    '\xd8'     #  0xAF -> LATIN CAPITAL LETTER O WITH STROKE
+    '\u221e'   #  0xB0 -> INFINITY
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\u2264'   #  0xB2 -> LESS-THAN OR EQUAL TO
+    '\u2265'   #  0xB3 -> GREATER-THAN OR EQUAL TO
+    '\xa5'     #  0xB4 -> YEN SIGN
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\u2202'   #  0xB6 -> PARTIAL DIFFERENTIAL
+    '\u2211'   #  0xB7 -> N-ARY SUMMATION
+    '\u220f'   #  0xB8 -> N-ARY PRODUCT
+    '\u03c0'   #  0xB9 -> GREEK SMALL LETTER PI
+    '\u222b'   #  0xBA -> INTEGRAL
+    '\xaa'     #  0xBB -> FEMININE ORDINAL INDICATOR
+    '\xba'     #  0xBC -> MASCULINE ORDINAL INDICATOR
+    '\u03a9'   #  0xBD -> GREEK CAPITAL LETTER OMEGA
+    '\xe6'     #  0xBE -> LATIN SMALL LETTER AE
+    '\xf8'     #  0xBF -> LATIN SMALL LETTER O WITH STROKE
+    '\xbf'     #  0xC0 -> INVERTED QUESTION MARK
+    '\xa1'     #  0xC1 -> INVERTED EXCLAMATION MARK
+    '\xac'     #  0xC2 -> NOT SIGN
+    '\u221a'   #  0xC3 -> SQUARE ROOT
+    '\u0192'   #  0xC4 -> LATIN SMALL LETTER F WITH HOOK
+    '\u2248'   #  0xC5 -> ALMOST EQUAL TO
+    '\u2206'   #  0xC6 -> INCREMENT
+    '\xab'     #  0xC7 -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbb'     #  0xC8 -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u2026'   #  0xC9 -> HORIZONTAL ELLIPSIS
+    '\xa0'     #  0xCA -> NO-BREAK SPACE
+    '\xc0'     #  0xCB -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc3'     #  0xCC -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xd5'     #  0xCD -> LATIN CAPITAL LETTER O WITH TILDE
+    '\u0152'   #  0xCE -> LATIN CAPITAL LIGATURE OE
+    '\u0153'   #  0xCF -> LATIN SMALL LIGATURE OE
+    '\u2013'   #  0xD0 -> EN DASH
+    '\u2014'   #  0xD1 -> EM DASH
+    '\u201c'   #  0xD2 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0xD3 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2018'   #  0xD4 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0xD5 -> RIGHT SINGLE QUOTATION MARK
+    '\xf7'     #  0xD6 -> DIVISION SIGN
+    '\u25ca'   #  0xD7 -> LOZENGE
+    '\xff'     #  0xD8 -> LATIN SMALL LETTER Y WITH DIAERESIS
+    '\u0178'   #  0xD9 -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\u011e'   #  0xDA -> LATIN CAPITAL LETTER G WITH BREVE
+    '\u011f'   #  0xDB -> LATIN SMALL LETTER G WITH BREVE
+    '\u0130'   #  0xDC -> LATIN CAPITAL LETTER I WITH DOT ABOVE
+    '\u0131'   #  0xDD -> LATIN SMALL LETTER DOTLESS I
+    '\u015e'   #  0xDE -> LATIN CAPITAL LETTER S WITH CEDILLA
+    '\u015f'   #  0xDF -> LATIN SMALL LETTER S WITH CEDILLA
+    '\u2021'   #  0xE0 -> DOUBLE DAGGER
+    '\xb7'     #  0xE1 -> MIDDLE DOT
+    '\u201a'   #  0xE2 -> SINGLE LOW-9 QUOTATION MARK
+    '\u201e'   #  0xE3 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2030'   #  0xE4 -> PER MILLE SIGN
+    '\xc2'     #  0xE5 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xca'     #  0xE6 -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xc1'     #  0xE7 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xcb'     #  0xE8 -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xc8'     #  0xE9 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xcd'     #  0xEA -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xEB -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xEC -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xcc'     #  0xED -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xd3'     #  0xEE -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xEF -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\uf8ff'   #  0xF0 -> Apple logo
+    '\xd2'     #  0xF1 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xda'     #  0xF2 -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xF3 -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xd9'     #  0xF4 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\uf8a0'   #  0xF5 -> undefined1
+    '\u02c6'   #  0xF6 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u02dc'   #  0xF7 -> SMALL TILDE
+    '\xaf'     #  0xF8 -> MACRON
+    '\u02d8'   #  0xF9 -> BREVE
+    '\u02d9'   #  0xFA -> DOT ABOVE
+    '\u02da'   #  0xFB -> RING ABOVE
+    '\xb8'     #  0xFC -> CEDILLA
+    '\u02dd'   #  0xFD -> DOUBLE ACUTE ACCENT
+    '\u02db'   #  0xFE -> OGONEK
+    '\u02c7'   #  0xFF -> CARON
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mbcs.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mbcs.py
new file mode 100644
index 0000000000000000000000000000000000000000..baf46cbd4836bda6bb8ddccff7c282048383e0a2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/mbcs.py
@@ -0,0 +1,47 @@
+""" Python 'mbcs' Codec for Windows
+
+
+Cloned by Mark Hammond (mhammond@skippinet.com.au) from ascii.py,
+which was written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+# Import them explicitly to cause an ImportError
+# on non-Windows systems
+from codecs import mbcs_encode, mbcs_decode
+# for IncrementalDecoder, IncrementalEncoder, ...
+import codecs
+
+### Codec APIs
+
+encode = mbcs_encode
+
+def decode(input, errors='strict'):
+    return mbcs_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return mbcs_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = mbcs_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = mbcs_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = mbcs_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='mbcs',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/oem.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/oem.py
new file mode 100644
index 0000000000000000000000000000000000000000..2c3426ba48ba5ad561b800336e65ec2d4c4ec006
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/oem.py
@@ -0,0 +1,41 @@
+""" Python 'oem' Codec for Windows
+
+"""
+# Import them explicitly to cause an ImportError
+# on non-Windows systems
+from codecs import oem_encode, oem_decode
+# for IncrementalDecoder, IncrementalEncoder, ...
+import codecs
+
+### Codec APIs
+
+encode = oem_encode
+
+def decode(input, errors='strict'):
+    return oem_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return oem_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = oem_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = oem_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = oem_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='oem',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/palmos.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/palmos.py
new file mode 100644
index 0000000000000000000000000000000000000000..df164ca5b9549cc454c138a2d307050a489e2607
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/palmos.py
@@ -0,0 +1,308 @@
+""" Python Character Mapping Codec for PalmOS 3.5.
+
+Written by Sjoerd Mullender (sjoerd@acm.org); based on iso8859_15.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='palmos',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\u20ac'   #  0x80 -> EURO SIGN
+    '\x81'     #  0x81 -> <control>
+    '\u201a'   #  0x82 -> SINGLE LOW-9 QUOTATION MARK
+    '\u0192'   #  0x83 -> LATIN SMALL LETTER F WITH HOOK
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u2020'   #  0x86 -> DAGGER
+    '\u2021'   #  0x87 -> DOUBLE DAGGER
+    '\u02c6'   #  0x88 -> MODIFIER LETTER CIRCUMFLEX ACCENT
+    '\u2030'   #  0x89 -> PER MILLE SIGN
+    '\u0160'   #  0x8A -> LATIN CAPITAL LETTER S WITH CARON
+    '\u2039'   #  0x8B -> SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    '\u0152'   #  0x8C -> LATIN CAPITAL LIGATURE OE
+    '\u2666'   #  0x8D -> BLACK DIAMOND SUIT
+    '\u2663'   #  0x8E -> BLACK CLUB SUIT
+    '\u2665'   #  0x8F -> BLACK HEART SUIT
+    '\u2660'   #  0x90 -> BLACK SPADE SUIT
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u02dc'   #  0x98 -> SMALL TILDE
+    '\u2122'   #  0x99 -> TRADE MARK SIGN
+    '\u0161'   #  0x9A -> LATIN SMALL LETTER S WITH CARON
+    '\u203a'   #  0x9B -> SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    '\u0153'   #  0x9C -> LATIN SMALL LIGATURE OE
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\u0178'   #  0x9F -> LATIN CAPITAL LETTER Y WITH DIAERESIS
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\xa1'     #  0xA1 -> INVERTED EXCLAMATION MARK
+    '\xa2'     #  0xA2 -> CENT SIGN
+    '\xa3'     #  0xA3 -> POUND SIGN
+    '\xa4'     #  0xA4 -> CURRENCY SIGN
+    '\xa5'     #  0xA5 -> YEN SIGN
+    '\xa6'     #  0xA6 -> BROKEN BAR
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\xa8'     #  0xA8 -> DIAERESIS
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\xaa'     #  0xAA -> FEMININE ORDINAL INDICATOR
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\xad'     #  0xAD -> SOFT HYPHEN
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\xaf'     #  0xAF -> MACRON
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\xb1'     #  0xB1 -> PLUS-MINUS SIGN
+    '\xb2'     #  0xB2 -> SUPERSCRIPT TWO
+    '\xb3'     #  0xB3 -> SUPERSCRIPT THREE
+    '\xb4'     #  0xB4 -> ACUTE ACCENT
+    '\xb5'     #  0xB5 -> MICRO SIGN
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\xb8'     #  0xB8 -> CEDILLA
+    '\xb9'     #  0xB9 -> SUPERSCRIPT ONE
+    '\xba'     #  0xBA -> MASCULINE ORDINAL INDICATOR
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xbc'     #  0xBC -> VULGAR FRACTION ONE QUARTER
+    '\xbd'     #  0xBD -> VULGAR FRACTION ONE HALF
+    '\xbe'     #  0xBE -> VULGAR FRACTION THREE QUARTERS
+    '\xbf'     #  0xBF -> INVERTED QUESTION MARK
+    '\xc0'     #  0xC0 -> LATIN CAPITAL LETTER A WITH GRAVE
+    '\xc1'     #  0xC1 -> LATIN CAPITAL LETTER A WITH ACUTE
+    '\xc2'     #  0xC2 -> LATIN CAPITAL LETTER A WITH CIRCUMFLEX
+    '\xc3'     #  0xC3 -> LATIN CAPITAL LETTER A WITH TILDE
+    '\xc4'     #  0xC4 -> LATIN CAPITAL LETTER A WITH DIAERESIS
+    '\xc5'     #  0xC5 -> LATIN CAPITAL LETTER A WITH RING ABOVE
+    '\xc6'     #  0xC6 -> LATIN CAPITAL LETTER AE
+    '\xc7'     #  0xC7 -> LATIN CAPITAL LETTER C WITH CEDILLA
+    '\xc8'     #  0xC8 -> LATIN CAPITAL LETTER E WITH GRAVE
+    '\xc9'     #  0xC9 -> LATIN CAPITAL LETTER E WITH ACUTE
+    '\xca'     #  0xCA -> LATIN CAPITAL LETTER E WITH CIRCUMFLEX
+    '\xcb'     #  0xCB -> LATIN CAPITAL LETTER E WITH DIAERESIS
+    '\xcc'     #  0xCC -> LATIN CAPITAL LETTER I WITH GRAVE
+    '\xcd'     #  0xCD -> LATIN CAPITAL LETTER I WITH ACUTE
+    '\xce'     #  0xCE -> LATIN CAPITAL LETTER I WITH CIRCUMFLEX
+    '\xcf'     #  0xCF -> LATIN CAPITAL LETTER I WITH DIAERESIS
+    '\xd0'     #  0xD0 -> LATIN CAPITAL LETTER ETH (Icelandic)
+    '\xd1'     #  0xD1 -> LATIN CAPITAL LETTER N WITH TILDE
+    '\xd2'     #  0xD2 -> LATIN CAPITAL LETTER O WITH GRAVE
+    '\xd3'     #  0xD3 -> LATIN CAPITAL LETTER O WITH ACUTE
+    '\xd4'     #  0xD4 -> LATIN CAPITAL LETTER O WITH CIRCUMFLEX
+    '\xd5'     #  0xD5 -> LATIN CAPITAL LETTER O WITH TILDE
+    '\xd6'     #  0xD6 -> LATIN CAPITAL LETTER O WITH DIAERESIS
+    '\xd7'     #  0xD7 -> MULTIPLICATION SIGN
+    '\xd8'     #  0xD8 -> LATIN CAPITAL LETTER O WITH STROKE
+    '\xd9'     #  0xD9 -> LATIN CAPITAL LETTER U WITH GRAVE
+    '\xda'     #  0xDA -> LATIN CAPITAL LETTER U WITH ACUTE
+    '\xdb'     #  0xDB -> LATIN CAPITAL LETTER U WITH CIRCUMFLEX
+    '\xdc'     #  0xDC -> LATIN CAPITAL LETTER U WITH DIAERESIS
+    '\xdd'     #  0xDD -> LATIN CAPITAL LETTER Y WITH ACUTE
+    '\xde'     #  0xDE -> LATIN CAPITAL LETTER THORN (Icelandic)
+    '\xdf'     #  0xDF -> LATIN SMALL LETTER SHARP S (German)
+    '\xe0'     #  0xE0 -> LATIN SMALL LETTER A WITH GRAVE
+    '\xe1'     #  0xE1 -> LATIN SMALL LETTER A WITH ACUTE
+    '\xe2'     #  0xE2 -> LATIN SMALL LETTER A WITH CIRCUMFLEX
+    '\xe3'     #  0xE3 -> LATIN SMALL LETTER A WITH TILDE
+    '\xe4'     #  0xE4 -> LATIN SMALL LETTER A WITH DIAERESIS
+    '\xe5'     #  0xE5 -> LATIN SMALL LETTER A WITH RING ABOVE
+    '\xe6'     #  0xE6 -> LATIN SMALL LETTER AE
+    '\xe7'     #  0xE7 -> LATIN SMALL LETTER C WITH CEDILLA
+    '\xe8'     #  0xE8 -> LATIN SMALL LETTER E WITH GRAVE
+    '\xe9'     #  0xE9 -> LATIN SMALL LETTER E WITH ACUTE
+    '\xea'     #  0xEA -> LATIN SMALL LETTER E WITH CIRCUMFLEX
+    '\xeb'     #  0xEB -> LATIN SMALL LETTER E WITH DIAERESIS
+    '\xec'     #  0xEC -> LATIN SMALL LETTER I WITH GRAVE
+    '\xed'     #  0xED -> LATIN SMALL LETTER I WITH ACUTE
+    '\xee'     #  0xEE -> LATIN SMALL LETTER I WITH CIRCUMFLEX
+    '\xef'     #  0xEF -> LATIN SMALL LETTER I WITH DIAERESIS
+    '\xf0'     #  0xF0 -> LATIN SMALL LETTER ETH (Icelandic)
+    '\xf1'     #  0xF1 -> LATIN SMALL LETTER N WITH TILDE
+    '\xf2'     #  0xF2 -> LATIN SMALL LETTER O WITH GRAVE
+    '\xf3'     #  0xF3 -> LATIN SMALL LETTER O WITH ACUTE
+    '\xf4'     #  0xF4 -> LATIN SMALL LETTER O WITH CIRCUMFLEX
+    '\xf5'     #  0xF5 -> LATIN SMALL LETTER O WITH TILDE
+    '\xf6'     #  0xF6 -> LATIN SMALL LETTER O WITH DIAERESIS
+    '\xf7'     #  0xF7 -> DIVISION SIGN
+    '\xf8'     #  0xF8 -> LATIN SMALL LETTER O WITH STROKE
+    '\xf9'     #  0xF9 -> LATIN SMALL LETTER U WITH GRAVE
+    '\xfa'     #  0xFA -> LATIN SMALL LETTER U WITH ACUTE
+    '\xfb'     #  0xFB -> LATIN SMALL LETTER U WITH CIRCUMFLEX
+    '\xfc'     #  0xFC -> LATIN SMALL LETTER U WITH DIAERESIS
+    '\xfd'     #  0xFD -> LATIN SMALL LETTER Y WITH ACUTE
+    '\xfe'     #  0xFE -> LATIN SMALL LETTER THORN (Icelandic)
+    '\xff'     #  0xFF -> LATIN SMALL LETTER Y WITH DIAERESIS
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ptcp154.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ptcp154.py
new file mode 100644
index 0000000000000000000000000000000000000000..656b79d6ac8adfe21645ae4985431d015898cc7b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/ptcp154.py
@@ -0,0 +1,312 @@
+""" Python Character Mapping Codec generated from 'PTCP154.txt' with gencodec.py.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+(c) Copyright 2000 Guido van Rossum.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='ptcp154',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE (DEL)
+    '\u0496'   #  0x80 -> CYRILLIC CAPITAL LETTER ZHE WITH DESCENDER
+    '\u0492'   #  0x81 -> CYRILLIC CAPITAL LETTER GHE WITH STROKE
+    '\u04ee'   #  0x82 -> CYRILLIC CAPITAL LETTER U WITH MACRON
+    '\u0493'   #  0x83 -> CYRILLIC SMALL LETTER GHE WITH STROKE
+    '\u201e'   #  0x84 -> DOUBLE LOW-9 QUOTATION MARK
+    '\u2026'   #  0x85 -> HORIZONTAL ELLIPSIS
+    '\u04b6'   #  0x86 -> CYRILLIC CAPITAL LETTER CHE WITH DESCENDER
+    '\u04ae'   #  0x87 -> CYRILLIC CAPITAL LETTER STRAIGHT U
+    '\u04b2'   #  0x88 -> CYRILLIC CAPITAL LETTER HA WITH DESCENDER
+    '\u04af'   #  0x89 -> CYRILLIC SMALL LETTER STRAIGHT U
+    '\u04a0'   #  0x8A -> CYRILLIC CAPITAL LETTER BASHKIR KA
+    '\u04e2'   #  0x8B -> CYRILLIC CAPITAL LETTER I WITH MACRON
+    '\u04a2'   #  0x8C -> CYRILLIC CAPITAL LETTER EN WITH DESCENDER
+    '\u049a'   #  0x8D -> CYRILLIC CAPITAL LETTER KA WITH DESCENDER
+    '\u04ba'   #  0x8E -> CYRILLIC CAPITAL LETTER SHHA
+    '\u04b8'   #  0x8F -> CYRILLIC CAPITAL LETTER CHE WITH VERTICAL STROKE
+    '\u0497'   #  0x90 -> CYRILLIC SMALL LETTER ZHE WITH DESCENDER
+    '\u2018'   #  0x91 -> LEFT SINGLE QUOTATION MARK
+    '\u2019'   #  0x92 -> RIGHT SINGLE QUOTATION MARK
+    '\u201c'   #  0x93 -> LEFT DOUBLE QUOTATION MARK
+    '\u201d'   #  0x94 -> RIGHT DOUBLE QUOTATION MARK
+    '\u2022'   #  0x95 -> BULLET
+    '\u2013'   #  0x96 -> EN DASH
+    '\u2014'   #  0x97 -> EM DASH
+    '\u04b3'   #  0x98 -> CYRILLIC SMALL LETTER HA WITH DESCENDER
+    '\u04b7'   #  0x99 -> CYRILLIC SMALL LETTER CHE WITH DESCENDER
+    '\u04a1'   #  0x9A -> CYRILLIC SMALL LETTER BASHKIR KA
+    '\u04e3'   #  0x9B -> CYRILLIC SMALL LETTER I WITH MACRON
+    '\u04a3'   #  0x9C -> CYRILLIC SMALL LETTER EN WITH DESCENDER
+    '\u049b'   #  0x9D -> CYRILLIC SMALL LETTER KA WITH DESCENDER
+    '\u04bb'   #  0x9E -> CYRILLIC SMALL LETTER SHHA
+    '\u04b9'   #  0x9F -> CYRILLIC SMALL LETTER CHE WITH VERTICAL STROKE
+    '\xa0'     #  0xA0 -> NO-BREAK SPACE
+    '\u040e'   #  0xA1 -> CYRILLIC CAPITAL LETTER SHORT U (Byelorussian)
+    '\u045e'   #  0xA2 -> CYRILLIC SMALL LETTER SHORT U (Byelorussian)
+    '\u0408'   #  0xA3 -> CYRILLIC CAPITAL LETTER JE
+    '\u04e8'   #  0xA4 -> CYRILLIC CAPITAL LETTER BARRED O
+    '\u0498'   #  0xA5 -> CYRILLIC CAPITAL LETTER ZE WITH DESCENDER
+    '\u04b0'   #  0xA6 -> CYRILLIC CAPITAL LETTER STRAIGHT U WITH STROKE
+    '\xa7'     #  0xA7 -> SECTION SIGN
+    '\u0401'   #  0xA8 -> CYRILLIC CAPITAL LETTER IO
+    '\xa9'     #  0xA9 -> COPYRIGHT SIGN
+    '\u04d8'   #  0xAA -> CYRILLIC CAPITAL LETTER SCHWA
+    '\xab'     #  0xAB -> LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\xac'     #  0xAC -> NOT SIGN
+    '\u04ef'   #  0xAD -> CYRILLIC SMALL LETTER U WITH MACRON
+    '\xae'     #  0xAE -> REGISTERED SIGN
+    '\u049c'   #  0xAF -> CYRILLIC CAPITAL LETTER KA WITH VERTICAL STROKE
+    '\xb0'     #  0xB0 -> DEGREE SIGN
+    '\u04b1'   #  0xB1 -> CYRILLIC SMALL LETTER STRAIGHT U WITH STROKE
+    '\u0406'   #  0xB2 -> CYRILLIC CAPITAL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0456'   #  0xB3 -> CYRILLIC SMALL LETTER BYELORUSSIAN-UKRAINIAN I
+    '\u0499'   #  0xB4 -> CYRILLIC SMALL LETTER ZE WITH DESCENDER
+    '\u04e9'   #  0xB5 -> CYRILLIC SMALL LETTER BARRED O
+    '\xb6'     #  0xB6 -> PILCROW SIGN
+    '\xb7'     #  0xB7 -> MIDDLE DOT
+    '\u0451'   #  0xB8 -> CYRILLIC SMALL LETTER IO
+    '\u2116'   #  0xB9 -> NUMERO SIGN
+    '\u04d9'   #  0xBA -> CYRILLIC SMALL LETTER SCHWA
+    '\xbb'     #  0xBB -> RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
+    '\u0458'   #  0xBC -> CYRILLIC SMALL LETTER JE
+    '\u04aa'   #  0xBD -> CYRILLIC CAPITAL LETTER ES WITH DESCENDER
+    '\u04ab'   #  0xBE -> CYRILLIC SMALL LETTER ES WITH DESCENDER
+    '\u049d'   #  0xBF -> CYRILLIC SMALL LETTER KA WITH VERTICAL STROKE
+    '\u0410'   #  0xC0 -> CYRILLIC CAPITAL LETTER A
+    '\u0411'   #  0xC1 -> CYRILLIC CAPITAL LETTER BE
+    '\u0412'   #  0xC2 -> CYRILLIC CAPITAL LETTER VE
+    '\u0413'   #  0xC3 -> CYRILLIC CAPITAL LETTER GHE
+    '\u0414'   #  0xC4 -> CYRILLIC CAPITAL LETTER DE
+    '\u0415'   #  0xC5 -> CYRILLIC CAPITAL LETTER IE
+    '\u0416'   #  0xC6 -> CYRILLIC CAPITAL LETTER ZHE
+    '\u0417'   #  0xC7 -> CYRILLIC CAPITAL LETTER ZE
+    '\u0418'   #  0xC8 -> CYRILLIC CAPITAL LETTER I
+    '\u0419'   #  0xC9 -> CYRILLIC CAPITAL LETTER SHORT I
+    '\u041a'   #  0xCA -> CYRILLIC CAPITAL LETTER KA
+    '\u041b'   #  0xCB -> CYRILLIC CAPITAL LETTER EL
+    '\u041c'   #  0xCC -> CYRILLIC CAPITAL LETTER EM
+    '\u041d'   #  0xCD -> CYRILLIC CAPITAL LETTER EN
+    '\u041e'   #  0xCE -> CYRILLIC CAPITAL LETTER O
+    '\u041f'   #  0xCF -> CYRILLIC CAPITAL LETTER PE
+    '\u0420'   #  0xD0 -> CYRILLIC CAPITAL LETTER ER
+    '\u0421'   #  0xD1 -> CYRILLIC CAPITAL LETTER ES
+    '\u0422'   #  0xD2 -> CYRILLIC CAPITAL LETTER TE
+    '\u0423'   #  0xD3 -> CYRILLIC CAPITAL LETTER U
+    '\u0424'   #  0xD4 -> CYRILLIC CAPITAL LETTER EF
+    '\u0425'   #  0xD5 -> CYRILLIC CAPITAL LETTER HA
+    '\u0426'   #  0xD6 -> CYRILLIC CAPITAL LETTER TSE
+    '\u0427'   #  0xD7 -> CYRILLIC CAPITAL LETTER CHE
+    '\u0428'   #  0xD8 -> CYRILLIC CAPITAL LETTER SHA
+    '\u0429'   #  0xD9 -> CYRILLIC CAPITAL LETTER SHCHA
+    '\u042a'   #  0xDA -> CYRILLIC CAPITAL LETTER HARD SIGN
+    '\u042b'   #  0xDB -> CYRILLIC CAPITAL LETTER YERU
+    '\u042c'   #  0xDC -> CYRILLIC CAPITAL LETTER SOFT SIGN
+    '\u042d'   #  0xDD -> CYRILLIC CAPITAL LETTER E
+    '\u042e'   #  0xDE -> CYRILLIC CAPITAL LETTER YU
+    '\u042f'   #  0xDF -> CYRILLIC CAPITAL LETTER YA
+    '\u0430'   #  0xE0 -> CYRILLIC SMALL LETTER A
+    '\u0431'   #  0xE1 -> CYRILLIC SMALL LETTER BE
+    '\u0432'   #  0xE2 -> CYRILLIC SMALL LETTER VE
+    '\u0433'   #  0xE3 -> CYRILLIC SMALL LETTER GHE
+    '\u0434'   #  0xE4 -> CYRILLIC SMALL LETTER DE
+    '\u0435'   #  0xE5 -> CYRILLIC SMALL LETTER IE
+    '\u0436'   #  0xE6 -> CYRILLIC SMALL LETTER ZHE
+    '\u0437'   #  0xE7 -> CYRILLIC SMALL LETTER ZE
+    '\u0438'   #  0xE8 -> CYRILLIC SMALL LETTER I
+    '\u0439'   #  0xE9 -> CYRILLIC SMALL LETTER SHORT I
+    '\u043a'   #  0xEA -> CYRILLIC SMALL LETTER KA
+    '\u043b'   #  0xEB -> CYRILLIC SMALL LETTER EL
+    '\u043c'   #  0xEC -> CYRILLIC SMALL LETTER EM
+    '\u043d'   #  0xED -> CYRILLIC SMALL LETTER EN
+    '\u043e'   #  0xEE -> CYRILLIC SMALL LETTER O
+    '\u043f'   #  0xEF -> CYRILLIC SMALL LETTER PE
+    '\u0440'   #  0xF0 -> CYRILLIC SMALL LETTER ER
+    '\u0441'   #  0xF1 -> CYRILLIC SMALL LETTER ES
+    '\u0442'   #  0xF2 -> CYRILLIC SMALL LETTER TE
+    '\u0443'   #  0xF3 -> CYRILLIC SMALL LETTER U
+    '\u0444'   #  0xF4 -> CYRILLIC SMALL LETTER EF
+    '\u0445'   #  0xF5 -> CYRILLIC SMALL LETTER HA
+    '\u0446'   #  0xF6 -> CYRILLIC SMALL LETTER TSE
+    '\u0447'   #  0xF7 -> CYRILLIC SMALL LETTER CHE
+    '\u0448'   #  0xF8 -> CYRILLIC SMALL LETTER SHA
+    '\u0449'   #  0xF9 -> CYRILLIC SMALL LETTER SHCHA
+    '\u044a'   #  0xFA -> CYRILLIC SMALL LETTER HARD SIGN
+    '\u044b'   #  0xFB -> CYRILLIC SMALL LETTER YERU
+    '\u044c'   #  0xFC -> CYRILLIC SMALL LETTER SOFT SIGN
+    '\u044d'   #  0xFD -> CYRILLIC SMALL LETTER E
+    '\u044e'   #  0xFE -> CYRILLIC SMALL LETTER YU
+    '\u044f'   #  0xFF -> CYRILLIC SMALL LETTER YA
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/punycode.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/punycode.py
new file mode 100644
index 0000000000000000000000000000000000000000..4622fc8c9206f375b2fe7024fc215219d880c591
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/punycode.py
@@ -0,0 +1,253 @@
+""" Codec for the Punycode encoding, as specified in RFC 3492
+
+Written by Martin v. Löwis.
+"""
+
+import codecs
+
+##################### Encoding #####################################
+
+def segregate(str):
+    """3.1 Basic code point segregation"""
+    base = bytearray()
+    extended = set()
+    for c in str:
+        if ord(c) < 128:
+            base.append(ord(c))
+        else:
+            extended.add(c)
+    extended = sorted(extended)
+    return bytes(base), extended
+
+def selective_len(str, max):
+    """Return the length of str, considering only characters below max."""
+    res = 0
+    for c in str:
+        if ord(c) < max:
+            res += 1
+    return res
+
+def selective_find(str, char, index, pos):
+    """Return a pair (index, pos), indicating the next occurrence of
+    char in str. index is the position of the character considering
+    only ordinals up to and including char, and pos is the position in
+    the full string. index/pos is the starting position in the full
+    string."""
+
+    l = len(str)
+    while 1:
+        pos += 1
+        if pos == l:
+            return (-1, -1)
+        c = str[pos]
+        if c == char:
+            return index+1, pos
+        elif c < char:
+            index += 1
+
+def insertion_unsort(str, extended):
+    """3.2 Insertion unsort coding"""
+    oldchar = 0x80
+    result = []
+    oldindex = -1
+    for c in extended:
+        index = pos = -1
+        char = ord(c)
+        curlen = selective_len(str, char)
+        delta = (curlen+1) * (char - oldchar)
+        while 1:
+            index,pos = selective_find(str,c,index,pos)
+            if index == -1:
+                break
+            delta += index - oldindex
+            result.append(delta-1)
+            oldindex = index
+            delta = 0
+        oldchar = char
+
+    return result
+
+def T(j, bias):
+    # Punycode parameters: tmin = 1, tmax = 26, base = 36
+    res = 36 * (j + 1) - bias
+    if res < 1: return 1
+    if res > 26: return 26
+    return res
+
+digits = b"abcdefghijklmnopqrstuvwxyz0123456789"
+def generate_generalized_integer(N, bias):
+    """3.3 Generalized variable-length integers"""
+    result = bytearray()
+    j = 0
+    while 1:
+        t = T(j, bias)
+        if N < t:
+            result.append(digits[N])
+            return bytes(result)
+        result.append(digits[t + ((N - t) % (36 - t))])
+        N = (N - t) // (36 - t)
+        j += 1
+
+def adapt(delta, first, numchars):
+    if first:
+        delta //= 700
+    else:
+        delta //= 2
+    delta += delta // numchars
+    # ((base - tmin) * tmax) // 2 == 455
+    divisions = 0
+    while delta > 455:
+        delta = delta // 35 # base - tmin
+        divisions += 36
+    bias = divisions + (36 * delta // (delta + 38))
+    return bias
+
+
+def generate_integers(baselen, deltas):
+    """3.4 Bias adaptation"""
+    # Punycode parameters: initial bias = 72, damp = 700, skew = 38
+    result = bytearray()
+    bias = 72
+    for points, delta in enumerate(deltas):
+        s = generate_generalized_integer(delta, bias)
+        result.extend(s)
+        bias = adapt(delta, points==0, baselen+points+1)
+    return bytes(result)
+
+def punycode_encode(text):
+    base, extended = segregate(text)
+    deltas = insertion_unsort(text, extended)
+    extended = generate_integers(len(base), deltas)
+    if base:
+        return base + b"-" + extended
+    return extended
+
+##################### Decoding #####################################
+
+def decode_generalized_number(extended, extpos, bias, errors):
+    """3.3 Generalized variable-length integers"""
+    result = 0
+    w = 1
+    j = 0
+    while 1:
+        try:
+            char = extended[extpos]
+        except IndexError:
+            if errors == "strict":
+                raise UnicodeDecodeError("punycode", extended, extpos, extpos+1,
+                                         "incomplete punycode string")
+            return extpos + 1, None
+        extpos += 1
+        if 0x41 <= char <= 0x5A: # A-Z
+            digit = char - 0x41
+        elif 0x30 <= char <= 0x39:
+            digit = char - 22 # 0x30-26
+        elif errors == "strict":
+            raise UnicodeDecodeError("punycode", extended, extpos-1, extpos,
+                                     f"Invalid extended code point '{extended[extpos-1]}'")
+        else:
+            return extpos, None
+        t = T(j, bias)
+        result += digit * w
+        if digit < t:
+            return extpos, result
+        w = w * (36 - t)
+        j += 1
+
+
+def insertion_sort(base, extended, errors):
+    """3.2 Insertion sort coding"""
+    # This function raises UnicodeDecodeError with position in the extended.
+    # Caller should add the offset.
+    char = 0x80
+    pos = -1
+    bias = 72
+    extpos = 0
+
+    while extpos < len(extended):
+        newpos, delta = decode_generalized_number(extended, extpos,
+                                                  bias, errors)
+        if delta is None:
+            # There was an error in decoding. We can't continue because
+            # synchronization is lost.
+            return base
+        pos += delta+1
+        char += pos // (len(base) + 1)
+        if char > 0x10FFFF:
+            if errors == "strict":
+                raise UnicodeDecodeError(
+                    "punycode", extended, pos-1, pos,
+                    f"Invalid character U+{char:x}")
+            char = ord('?')
+        pos = pos % (len(base) + 1)
+        base = base[:pos] + chr(char) + base[pos:]
+        bias = adapt(delta, (extpos == 0), len(base))
+        extpos = newpos
+    return base
+
+def punycode_decode(text, errors):
+    if isinstance(text, str):
+        text = text.encode("ascii")
+    if isinstance(text, memoryview):
+        text = bytes(text)
+    pos = text.rfind(b"-")
+    if pos == -1:
+        base = ""
+        extended = text.upper()
+    else:
+        try:
+            base = str(text[:pos], "ascii", errors)
+        except UnicodeDecodeError as exc:
+            raise UnicodeDecodeError("ascii", text, exc.start, exc.end,
+                                     exc.reason) from None
+        extended = text[pos+1:].upper()
+    try:
+        return insertion_sort(base, extended, errors)
+    except UnicodeDecodeError as exc:
+        offset = pos + 1
+        raise UnicodeDecodeError("punycode", text,
+                                 offset+exc.start, offset+exc.end,
+                                 exc.reason) from None
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self, input, errors='strict'):
+        res = punycode_encode(input)
+        return res, len(input)
+
+    def decode(self, input, errors='strict'):
+        if errors not in ('strict', 'replace', 'ignore'):
+            raise UnicodeError(f"Unsupported error handling: {errors}")
+        res = punycode_decode(input, errors)
+        return res, len(input)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return punycode_encode(input)
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        if self.errors not in ('strict', 'replace', 'ignore'):
+            raise UnicodeError(f"Unsupported error handling: {self.errors}")
+        return punycode_decode(input, self.errors)
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='punycode',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/quopri_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/quopri_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..496cb7655d032def0791960108b517ae2ac6c4a3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/quopri_codec.py
@@ -0,0 +1,56 @@
+"""Codec for quoted-printable encoding.
+
+This codec de/encodes from bytes to bytes.
+"""
+
+import codecs
+import quopri
+from io import BytesIO
+
+def quopri_encode(input, errors='strict'):
+    assert errors == 'strict'
+    f = BytesIO(input)
+    g = BytesIO()
+    quopri.encode(f, g, quotetabs=True)
+    return (g.getvalue(), len(input))
+
+def quopri_decode(input, errors='strict'):
+    assert errors == 'strict'
+    f = BytesIO(input)
+    g = BytesIO()
+    quopri.decode(f, g)
+    return (g.getvalue(), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return quopri_encode(input, errors)
+    def decode(self, input, errors='strict'):
+        return quopri_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return quopri_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return quopri_decode(input, self.errors)[0]
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+# encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='quopri',
+        encode=quopri_encode,
+        decode=quopri_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/raw_unicode_escape.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/raw_unicode_escape.py
new file mode 100644
index 0000000000000000000000000000000000000000..46c8e070dd192ed4bae9682d91e5d56413345cf1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/raw_unicode_escape.py
@@ -0,0 +1,46 @@
+""" Python 'raw-unicode-escape' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    # Note: Binding these as C functions will result in the class not
+    # converting them to methods. This is intended.
+    encode = codecs.raw_unicode_escape_encode
+    decode = codecs.raw_unicode_escape_decode
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.raw_unicode_escape_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def _buffer_decode(self, input, errors, final):
+        return codecs.raw_unicode_escape_decode(input, errors, final)
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    def decode(self, input, errors='strict'):
+        return codecs.raw_unicode_escape_decode(input, errors, False)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='raw-unicode-escape',
+        encode=Codec.encode,
+        decode=Codec.decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/rot_13.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/rot_13.py
new file mode 100644
index 0000000000000000000000000000000000000000..5627bfbc69cbbc815515d405e53c391cc95f29a7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/rot_13.py
@@ -0,0 +1,113 @@
+#!/usr/bin/env python
+""" Python Character Mapping Codec for ROT13.
+
+This codec de/encodes from str to str.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+"""
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return (str.translate(input, rot13_map), len(input))
+
+    def decode(self, input, errors='strict'):
+        return (str.translate(input, rot13_map), len(input))
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return str.translate(input, rot13_map)
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return str.translate(input, rot13_map)
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='rot-13',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+        _is_text_encoding=False,
+    )
+
+### Map
+
+rot13_map = codecs.make_identity_dict(range(256))
+rot13_map.update({
+   0x0041: 0x004e,
+   0x0042: 0x004f,
+   0x0043: 0x0050,
+   0x0044: 0x0051,
+   0x0045: 0x0052,
+   0x0046: 0x0053,
+   0x0047: 0x0054,
+   0x0048: 0x0055,
+   0x0049: 0x0056,
+   0x004a: 0x0057,
+   0x004b: 0x0058,
+   0x004c: 0x0059,
+   0x004d: 0x005a,
+   0x004e: 0x0041,
+   0x004f: 0x0042,
+   0x0050: 0x0043,
+   0x0051: 0x0044,
+   0x0052: 0x0045,
+   0x0053: 0x0046,
+   0x0054: 0x0047,
+   0x0055: 0x0048,
+   0x0056: 0x0049,
+   0x0057: 0x004a,
+   0x0058: 0x004b,
+   0x0059: 0x004c,
+   0x005a: 0x004d,
+   0x0061: 0x006e,
+   0x0062: 0x006f,
+   0x0063: 0x0070,
+   0x0064: 0x0071,
+   0x0065: 0x0072,
+   0x0066: 0x0073,
+   0x0067: 0x0074,
+   0x0068: 0x0075,
+   0x0069: 0x0076,
+   0x006a: 0x0077,
+   0x006b: 0x0078,
+   0x006c: 0x0079,
+   0x006d: 0x007a,
+   0x006e: 0x0061,
+   0x006f: 0x0062,
+   0x0070: 0x0063,
+   0x0071: 0x0064,
+   0x0072: 0x0065,
+   0x0073: 0x0066,
+   0x0074: 0x0067,
+   0x0075: 0x0068,
+   0x0076: 0x0069,
+   0x0077: 0x006a,
+   0x0078: 0x006b,
+   0x0079: 0x006c,
+   0x007a: 0x006d,
+})
+
+### Filter API
+
+def rot13(infile, outfile):
+    outfile.write(codecs.encode(infile.read(), 'rot-13'))
+
+if __name__ == '__main__':
+    import sys
+    rot13(sys.stdin, sys.stdout)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis.py
new file mode 100644
index 0000000000000000000000000000000000000000..83381172764dea0f76874716cda28852a5906f7f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis.py
@@ -0,0 +1,39 @@
+#
+# shift_jis.py: Python Unicode Codec for SHIFT_JIS
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('shift_jis')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='shift_jis',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis_2004.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis_2004.py
new file mode 100644
index 0000000000000000000000000000000000000000..161b1e86f9918a4df5c3290505a98d5de4566e0e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jis_2004.py
@@ -0,0 +1,39 @@
+#
+# shift_jis_2004.py: Python Unicode Codec for SHIFT_JIS_2004
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('shift_jis_2004')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='shift_jis_2004',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jisx0213.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jisx0213.py
new file mode 100644
index 0000000000000000000000000000000000000000..cb653f53055e679c513218b0102ffa9d1b4ca82c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/shift_jisx0213.py
@@ -0,0 +1,39 @@
+#
+# shift_jisx0213.py: Python Unicode Codec for SHIFT_JISX0213
+#
+# Written by Hye-Shik Chang <perky@FreeBSD.org>
+#
+
+import _codecs_jp, codecs
+import _multibytecodec as mbc
+
+codec = _codecs_jp.getcodec('shift_jisx0213')
+
+class Codec(codecs.Codec):
+    encode = codec.encode
+    decode = codec.decode
+
+class IncrementalEncoder(mbc.MultibyteIncrementalEncoder,
+                         codecs.IncrementalEncoder):
+    codec = codec
+
+class IncrementalDecoder(mbc.MultibyteIncrementalDecoder,
+                         codecs.IncrementalDecoder):
+    codec = codec
+
+class StreamReader(Codec, mbc.MultibyteStreamReader, codecs.StreamReader):
+    codec = codec
+
+class StreamWriter(Codec, mbc.MultibyteStreamWriter, codecs.StreamWriter):
+    codec = codec
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='shift_jisx0213',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/tis_620.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/tis_620.py
new file mode 100644
index 0000000000000000000000000000000000000000..e288386343df6b2ee2c147980a5bbfff38b318e8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/tis_620.py
@@ -0,0 +1,307 @@
+""" Python Character Mapping Codec tis_620 generated from 'python-mappings/TIS-620.TXT' with gencodec.py.
+
+"""#"
+
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        return codecs.charmap_encode(input,errors,encoding_table)
+
+    def decode(self,input,errors='strict'):
+        return codecs.charmap_decode(input,errors,decoding_table)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.charmap_encode(input,self.errors,encoding_table)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return codecs.charmap_decode(input,self.errors,decoding_table)[0]
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='tis-620',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
+
+
+### Decoding Table
+
+decoding_table = (
+    '\x00'     #  0x00 -> NULL
+    '\x01'     #  0x01 -> START OF HEADING
+    '\x02'     #  0x02 -> START OF TEXT
+    '\x03'     #  0x03 -> END OF TEXT
+    '\x04'     #  0x04 -> END OF TRANSMISSION
+    '\x05'     #  0x05 -> ENQUIRY
+    '\x06'     #  0x06 -> ACKNOWLEDGE
+    '\x07'     #  0x07 -> BELL
+    '\x08'     #  0x08 -> BACKSPACE
+    '\t'       #  0x09 -> HORIZONTAL TABULATION
+    '\n'       #  0x0A -> LINE FEED
+    '\x0b'     #  0x0B -> VERTICAL TABULATION
+    '\x0c'     #  0x0C -> FORM FEED
+    '\r'       #  0x0D -> CARRIAGE RETURN
+    '\x0e'     #  0x0E -> SHIFT OUT
+    '\x0f'     #  0x0F -> SHIFT IN
+    '\x10'     #  0x10 -> DATA LINK ESCAPE
+    '\x11'     #  0x11 -> DEVICE CONTROL ONE
+    '\x12'     #  0x12 -> DEVICE CONTROL TWO
+    '\x13'     #  0x13 -> DEVICE CONTROL THREE
+    '\x14'     #  0x14 -> DEVICE CONTROL FOUR
+    '\x15'     #  0x15 -> NEGATIVE ACKNOWLEDGE
+    '\x16'     #  0x16 -> SYNCHRONOUS IDLE
+    '\x17'     #  0x17 -> END OF TRANSMISSION BLOCK
+    '\x18'     #  0x18 -> CANCEL
+    '\x19'     #  0x19 -> END OF MEDIUM
+    '\x1a'     #  0x1A -> SUBSTITUTE
+    '\x1b'     #  0x1B -> ESCAPE
+    '\x1c'     #  0x1C -> FILE SEPARATOR
+    '\x1d'     #  0x1D -> GROUP SEPARATOR
+    '\x1e'     #  0x1E -> RECORD SEPARATOR
+    '\x1f'     #  0x1F -> UNIT SEPARATOR
+    ' '        #  0x20 -> SPACE
+    '!'        #  0x21 -> EXCLAMATION MARK
+    '"'        #  0x22 -> QUOTATION MARK
+    '#'        #  0x23 -> NUMBER SIGN
+    '$'        #  0x24 -> DOLLAR SIGN
+    '%'        #  0x25 -> PERCENT SIGN
+    '&'        #  0x26 -> AMPERSAND
+    "'"        #  0x27 -> APOSTROPHE
+    '('        #  0x28 -> LEFT PARENTHESIS
+    ')'        #  0x29 -> RIGHT PARENTHESIS
+    '*'        #  0x2A -> ASTERISK
+    '+'        #  0x2B -> PLUS SIGN
+    ','        #  0x2C -> COMMA
+    '-'        #  0x2D -> HYPHEN-MINUS
+    '.'        #  0x2E -> FULL STOP
+    '/'        #  0x2F -> SOLIDUS
+    '0'        #  0x30 -> DIGIT ZERO
+    '1'        #  0x31 -> DIGIT ONE
+    '2'        #  0x32 -> DIGIT TWO
+    '3'        #  0x33 -> DIGIT THREE
+    '4'        #  0x34 -> DIGIT FOUR
+    '5'        #  0x35 -> DIGIT FIVE
+    '6'        #  0x36 -> DIGIT SIX
+    '7'        #  0x37 -> DIGIT SEVEN
+    '8'        #  0x38 -> DIGIT EIGHT
+    '9'        #  0x39 -> DIGIT NINE
+    ':'        #  0x3A -> COLON
+    ';'        #  0x3B -> SEMICOLON
+    '<'        #  0x3C -> LESS-THAN SIGN
+    '='        #  0x3D -> EQUALS SIGN
+    '>'        #  0x3E -> GREATER-THAN SIGN
+    '?'        #  0x3F -> QUESTION MARK
+    '@'        #  0x40 -> COMMERCIAL AT
+    'A'        #  0x41 -> LATIN CAPITAL LETTER A
+    'B'        #  0x42 -> LATIN CAPITAL LETTER B
+    'C'        #  0x43 -> LATIN CAPITAL LETTER C
+    'D'        #  0x44 -> LATIN CAPITAL LETTER D
+    'E'        #  0x45 -> LATIN CAPITAL LETTER E
+    'F'        #  0x46 -> LATIN CAPITAL LETTER F
+    'G'        #  0x47 -> LATIN CAPITAL LETTER G
+    'H'        #  0x48 -> LATIN CAPITAL LETTER H
+    'I'        #  0x49 -> LATIN CAPITAL LETTER I
+    'J'        #  0x4A -> LATIN CAPITAL LETTER J
+    'K'        #  0x4B -> LATIN CAPITAL LETTER K
+    'L'        #  0x4C -> LATIN CAPITAL LETTER L
+    'M'        #  0x4D -> LATIN CAPITAL LETTER M
+    'N'        #  0x4E -> LATIN CAPITAL LETTER N
+    'O'        #  0x4F -> LATIN CAPITAL LETTER O
+    'P'        #  0x50 -> LATIN CAPITAL LETTER P
+    'Q'        #  0x51 -> LATIN CAPITAL LETTER Q
+    'R'        #  0x52 -> LATIN CAPITAL LETTER R
+    'S'        #  0x53 -> LATIN CAPITAL LETTER S
+    'T'        #  0x54 -> LATIN CAPITAL LETTER T
+    'U'        #  0x55 -> LATIN CAPITAL LETTER U
+    'V'        #  0x56 -> LATIN CAPITAL LETTER V
+    'W'        #  0x57 -> LATIN CAPITAL LETTER W
+    'X'        #  0x58 -> LATIN CAPITAL LETTER X
+    'Y'        #  0x59 -> LATIN CAPITAL LETTER Y
+    'Z'        #  0x5A -> LATIN CAPITAL LETTER Z
+    '['        #  0x5B -> LEFT SQUARE BRACKET
+    '\\'       #  0x5C -> REVERSE SOLIDUS
+    ']'        #  0x5D -> RIGHT SQUARE BRACKET
+    '^'        #  0x5E -> CIRCUMFLEX ACCENT
+    '_'        #  0x5F -> LOW LINE
+    '`'        #  0x60 -> GRAVE ACCENT
+    'a'        #  0x61 -> LATIN SMALL LETTER A
+    'b'        #  0x62 -> LATIN SMALL LETTER B
+    'c'        #  0x63 -> LATIN SMALL LETTER C
+    'd'        #  0x64 -> LATIN SMALL LETTER D
+    'e'        #  0x65 -> LATIN SMALL LETTER E
+    'f'        #  0x66 -> LATIN SMALL LETTER F
+    'g'        #  0x67 -> LATIN SMALL LETTER G
+    'h'        #  0x68 -> LATIN SMALL LETTER H
+    'i'        #  0x69 -> LATIN SMALL LETTER I
+    'j'        #  0x6A -> LATIN SMALL LETTER J
+    'k'        #  0x6B -> LATIN SMALL LETTER K
+    'l'        #  0x6C -> LATIN SMALL LETTER L
+    'm'        #  0x6D -> LATIN SMALL LETTER M
+    'n'        #  0x6E -> LATIN SMALL LETTER N
+    'o'        #  0x6F -> LATIN SMALL LETTER O
+    'p'        #  0x70 -> LATIN SMALL LETTER P
+    'q'        #  0x71 -> LATIN SMALL LETTER Q
+    'r'        #  0x72 -> LATIN SMALL LETTER R
+    's'        #  0x73 -> LATIN SMALL LETTER S
+    't'        #  0x74 -> LATIN SMALL LETTER T
+    'u'        #  0x75 -> LATIN SMALL LETTER U
+    'v'        #  0x76 -> LATIN SMALL LETTER V
+    'w'        #  0x77 -> LATIN SMALL LETTER W
+    'x'        #  0x78 -> LATIN SMALL LETTER X
+    'y'        #  0x79 -> LATIN SMALL LETTER Y
+    'z'        #  0x7A -> LATIN SMALL LETTER Z
+    '{'        #  0x7B -> LEFT CURLY BRACKET
+    '|'        #  0x7C -> VERTICAL LINE
+    '}'        #  0x7D -> RIGHT CURLY BRACKET
+    '~'        #  0x7E -> TILDE
+    '\x7f'     #  0x7F -> DELETE
+    '\x80'     #  0x80 -> <control>
+    '\x81'     #  0x81 -> <control>
+    '\x82'     #  0x82 -> <control>
+    '\x83'     #  0x83 -> <control>
+    '\x84'     #  0x84 -> <control>
+    '\x85'     #  0x85 -> <control>
+    '\x86'     #  0x86 -> <control>
+    '\x87'     #  0x87 -> <control>
+    '\x88'     #  0x88 -> <control>
+    '\x89'     #  0x89 -> <control>
+    '\x8a'     #  0x8A -> <control>
+    '\x8b'     #  0x8B -> <control>
+    '\x8c'     #  0x8C -> <control>
+    '\x8d'     #  0x8D -> <control>
+    '\x8e'     #  0x8E -> <control>
+    '\x8f'     #  0x8F -> <control>
+    '\x90'     #  0x90 -> <control>
+    '\x91'     #  0x91 -> <control>
+    '\x92'     #  0x92 -> <control>
+    '\x93'     #  0x93 -> <control>
+    '\x94'     #  0x94 -> <control>
+    '\x95'     #  0x95 -> <control>
+    '\x96'     #  0x96 -> <control>
+    '\x97'     #  0x97 -> <control>
+    '\x98'     #  0x98 -> <control>
+    '\x99'     #  0x99 -> <control>
+    '\x9a'     #  0x9A -> <control>
+    '\x9b'     #  0x9B -> <control>
+    '\x9c'     #  0x9C -> <control>
+    '\x9d'     #  0x9D -> <control>
+    '\x9e'     #  0x9E -> <control>
+    '\x9f'     #  0x9F -> <control>
+    '\ufffe'
+    '\u0e01'   #  0xA1 -> THAI CHARACTER KO KAI
+    '\u0e02'   #  0xA2 -> THAI CHARACTER KHO KHAI
+    '\u0e03'   #  0xA3 -> THAI CHARACTER KHO KHUAT
+    '\u0e04'   #  0xA4 -> THAI CHARACTER KHO KHWAI
+    '\u0e05'   #  0xA5 -> THAI CHARACTER KHO KHON
+    '\u0e06'   #  0xA6 -> THAI CHARACTER KHO RAKHANG
+    '\u0e07'   #  0xA7 -> THAI CHARACTER NGO NGU
+    '\u0e08'   #  0xA8 -> THAI CHARACTER CHO CHAN
+    '\u0e09'   #  0xA9 -> THAI CHARACTER CHO CHING
+    '\u0e0a'   #  0xAA -> THAI CHARACTER CHO CHANG
+    '\u0e0b'   #  0xAB -> THAI CHARACTER SO SO
+    '\u0e0c'   #  0xAC -> THAI CHARACTER CHO CHOE
+    '\u0e0d'   #  0xAD -> THAI CHARACTER YO YING
+    '\u0e0e'   #  0xAE -> THAI CHARACTER DO CHADA
+    '\u0e0f'   #  0xAF -> THAI CHARACTER TO PATAK
+    '\u0e10'   #  0xB0 -> THAI CHARACTER THO THAN
+    '\u0e11'   #  0xB1 -> THAI CHARACTER THO NANGMONTHO
+    '\u0e12'   #  0xB2 -> THAI CHARACTER THO PHUTHAO
+    '\u0e13'   #  0xB3 -> THAI CHARACTER NO NEN
+    '\u0e14'   #  0xB4 -> THAI CHARACTER DO DEK
+    '\u0e15'   #  0xB5 -> THAI CHARACTER TO TAO
+    '\u0e16'   #  0xB6 -> THAI CHARACTER THO THUNG
+    '\u0e17'   #  0xB7 -> THAI CHARACTER THO THAHAN
+    '\u0e18'   #  0xB8 -> THAI CHARACTER THO THONG
+    '\u0e19'   #  0xB9 -> THAI CHARACTER NO NU
+    '\u0e1a'   #  0xBA -> THAI CHARACTER BO BAIMAI
+    '\u0e1b'   #  0xBB -> THAI CHARACTER PO PLA
+    '\u0e1c'   #  0xBC -> THAI CHARACTER PHO PHUNG
+    '\u0e1d'   #  0xBD -> THAI CHARACTER FO FA
+    '\u0e1e'   #  0xBE -> THAI CHARACTER PHO PHAN
+    '\u0e1f'   #  0xBF -> THAI CHARACTER FO FAN
+    '\u0e20'   #  0xC0 -> THAI CHARACTER PHO SAMPHAO
+    '\u0e21'   #  0xC1 -> THAI CHARACTER MO MA
+    '\u0e22'   #  0xC2 -> THAI CHARACTER YO YAK
+    '\u0e23'   #  0xC3 -> THAI CHARACTER RO RUA
+    '\u0e24'   #  0xC4 -> THAI CHARACTER RU
+    '\u0e25'   #  0xC5 -> THAI CHARACTER LO LING
+    '\u0e26'   #  0xC6 -> THAI CHARACTER LU
+    '\u0e27'   #  0xC7 -> THAI CHARACTER WO WAEN
+    '\u0e28'   #  0xC8 -> THAI CHARACTER SO SALA
+    '\u0e29'   #  0xC9 -> THAI CHARACTER SO RUSI
+    '\u0e2a'   #  0xCA -> THAI CHARACTER SO SUA
+    '\u0e2b'   #  0xCB -> THAI CHARACTER HO HIP
+    '\u0e2c'   #  0xCC -> THAI CHARACTER LO CHULA
+    '\u0e2d'   #  0xCD -> THAI CHARACTER O ANG
+    '\u0e2e'   #  0xCE -> THAI CHARACTER HO NOKHUK
+    '\u0e2f'   #  0xCF -> THAI CHARACTER PAIYANNOI
+    '\u0e30'   #  0xD0 -> THAI CHARACTER SARA A
+    '\u0e31'   #  0xD1 -> THAI CHARACTER MAI HAN-AKAT
+    '\u0e32'   #  0xD2 -> THAI CHARACTER SARA AA
+    '\u0e33'   #  0xD3 -> THAI CHARACTER SARA AM
+    '\u0e34'   #  0xD4 -> THAI CHARACTER SARA I
+    '\u0e35'   #  0xD5 -> THAI CHARACTER SARA II
+    '\u0e36'   #  0xD6 -> THAI CHARACTER SARA UE
+    '\u0e37'   #  0xD7 -> THAI CHARACTER SARA UEE
+    '\u0e38'   #  0xD8 -> THAI CHARACTER SARA U
+    '\u0e39'   #  0xD9 -> THAI CHARACTER SARA UU
+    '\u0e3a'   #  0xDA -> THAI CHARACTER PHINTHU
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\u0e3f'   #  0xDF -> THAI CURRENCY SYMBOL BAHT
+    '\u0e40'   #  0xE0 -> THAI CHARACTER SARA E
+    '\u0e41'   #  0xE1 -> THAI CHARACTER SARA AE
+    '\u0e42'   #  0xE2 -> THAI CHARACTER SARA O
+    '\u0e43'   #  0xE3 -> THAI CHARACTER SARA AI MAIMUAN
+    '\u0e44'   #  0xE4 -> THAI CHARACTER SARA AI MAIMALAI
+    '\u0e45'   #  0xE5 -> THAI CHARACTER LAKKHANGYAO
+    '\u0e46'   #  0xE6 -> THAI CHARACTER MAIYAMOK
+    '\u0e47'   #  0xE7 -> THAI CHARACTER MAITAIKHU
+    '\u0e48'   #  0xE8 -> THAI CHARACTER MAI EK
+    '\u0e49'   #  0xE9 -> THAI CHARACTER MAI THO
+    '\u0e4a'   #  0xEA -> THAI CHARACTER MAI TRI
+    '\u0e4b'   #  0xEB -> THAI CHARACTER MAI CHATTAWA
+    '\u0e4c'   #  0xEC -> THAI CHARACTER THANTHAKHAT
+    '\u0e4d'   #  0xED -> THAI CHARACTER NIKHAHIT
+    '\u0e4e'   #  0xEE -> THAI CHARACTER YAMAKKAN
+    '\u0e4f'   #  0xEF -> THAI CHARACTER FONGMAN
+    '\u0e50'   #  0xF0 -> THAI DIGIT ZERO
+    '\u0e51'   #  0xF1 -> THAI DIGIT ONE
+    '\u0e52'   #  0xF2 -> THAI DIGIT TWO
+    '\u0e53'   #  0xF3 -> THAI DIGIT THREE
+    '\u0e54'   #  0xF4 -> THAI DIGIT FOUR
+    '\u0e55'   #  0xF5 -> THAI DIGIT FIVE
+    '\u0e56'   #  0xF6 -> THAI DIGIT SIX
+    '\u0e57'   #  0xF7 -> THAI DIGIT SEVEN
+    '\u0e58'   #  0xF8 -> THAI DIGIT EIGHT
+    '\u0e59'   #  0xF9 -> THAI DIGIT NINE
+    '\u0e5a'   #  0xFA -> THAI CHARACTER ANGKHANKHU
+    '\u0e5b'   #  0xFB -> THAI CHARACTER KHOMUT
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+    '\ufffe'
+)
+
+### Encoding table
+encoding_table=codecs.charmap_build(decoding_table)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/undefined.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/undefined.py
new file mode 100644
index 0000000000000000000000000000000000000000..082771e1c866773f6498fc46a61132a0736ec4b8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/undefined.py
@@ -0,0 +1,49 @@
+""" Python 'undefined' Codec
+
+    This codec will always raise a UnicodeError exception when being
+    used. It is intended for use by the site.py file to switch off
+    automatic string to Unicode coercion.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    def encode(self,input,errors='strict'):
+        raise UnicodeError("undefined encoding")
+
+    def decode(self,input,errors='strict'):
+        raise UnicodeError("undefined encoding")
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        raise UnicodeError("undefined encoding")
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        raise UnicodeError("undefined encoding")
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    pass
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='undefined',
+        encode=Codec().encode,
+        decode=Codec().decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/unicode_escape.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/unicode_escape.py
new file mode 100644
index 0000000000000000000000000000000000000000..9b1ce99b339ae08eb63334393d8d81d54ab26475
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/unicode_escape.py
@@ -0,0 +1,46 @@
+""" Python 'unicode-escape' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+class Codec(codecs.Codec):
+
+    # Note: Binding these as C functions will result in the class not
+    # converting them to methods. This is intended.
+    encode = codecs.unicode_escape_encode
+    decode = codecs.unicode_escape_decode
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.unicode_escape_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def _buffer_decode(self, input, errors, final):
+        return codecs.unicode_escape_decode(input, errors, final)
+
+class StreamWriter(Codec,codecs.StreamWriter):
+    pass
+
+class StreamReader(Codec,codecs.StreamReader):
+    def decode(self, input, errors='strict'):
+        return codecs.unicode_escape_decode(input, errors, False)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='unicode-escape',
+        encode=Codec.encode,
+        decode=Codec.decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamwriter=StreamWriter,
+        streamreader=StreamReader,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16.py
new file mode 100644
index 0000000000000000000000000000000000000000..d3b9980026666f10d646569ec8f138a98bd62844
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16.py
@@ -0,0 +1,155 @@
+""" Python 'utf-16' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs, sys
+
+### Codec APIs
+
+encode = codecs.utf_16_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_16_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict'):
+        codecs.IncrementalEncoder.__init__(self, errors)
+        self.encoder = None
+
+    def encode(self, input, final=False):
+        if self.encoder is None:
+            result = codecs.utf_16_encode(input, self.errors)[0]
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_16_le_encode
+            else:
+                self.encoder = codecs.utf_16_be_encode
+            return result
+        return self.encoder(input, self.errors)[0]
+
+    def reset(self):
+        codecs.IncrementalEncoder.reset(self)
+        self.encoder = None
+
+    def getstate(self):
+        # state info we return to the caller:
+        # 0: stream is in natural order for this platform
+        # 2: endianness hasn't been determined yet
+        # (we're never writing in unnatural order)
+        return (2 if self.encoder is None else 0)
+
+    def setstate(self, state):
+        if state:
+            self.encoder = None
+        else:
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_16_le_encode
+            else:
+                self.encoder = codecs.utf_16_be_encode
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def __init__(self, errors='strict'):
+        codecs.BufferedIncrementalDecoder.__init__(self, errors)
+        self.decoder = None
+
+    def _buffer_decode(self, input, errors, final):
+        if self.decoder is None:
+            (output, consumed, byteorder) = \
+                codecs.utf_16_ex_decode(input, errors, 0, final)
+            if byteorder == -1:
+                self.decoder = codecs.utf_16_le_decode
+            elif byteorder == 1:
+                self.decoder = codecs.utf_16_be_decode
+            elif consumed >= 2:
+                raise UnicodeDecodeError("utf-16", input, 0, 2, "Stream does not start with BOM")
+            return (output, consumed)
+        return self.decoder(input, self.errors, final)
+
+    def reset(self):
+        codecs.BufferedIncrementalDecoder.reset(self)
+        self.decoder = None
+
+    def getstate(self):
+        # additional state info from the base class must be None here,
+        # as it isn't passed along to the caller
+        state = codecs.BufferedIncrementalDecoder.getstate(self)[0]
+        # additional state info we pass to the caller:
+        # 0: stream is in natural order for this platform
+        # 1: stream is in unnatural order
+        # 2: endianness hasn't been determined yet
+        if self.decoder is None:
+            return (state, 2)
+        addstate = int((sys.byteorder == "big") !=
+                       (self.decoder is codecs.utf_16_be_decode))
+        return (state, addstate)
+
+    def setstate(self, state):
+        # state[1] will be ignored by BufferedIncrementalDecoder.setstate()
+        codecs.BufferedIncrementalDecoder.setstate(self, state)
+        state = state[1]
+        if state == 0:
+            self.decoder = (codecs.utf_16_be_decode
+                            if sys.byteorder == "big"
+                            else codecs.utf_16_le_decode)
+        elif state == 1:
+            self.decoder = (codecs.utf_16_le_decode
+                            if sys.byteorder == "big"
+                            else codecs.utf_16_be_decode)
+        else:
+            self.decoder = None
+
+class StreamWriter(codecs.StreamWriter):
+    def __init__(self, stream, errors='strict'):
+        codecs.StreamWriter.__init__(self, stream, errors)
+        self.encoder = None
+
+    def reset(self):
+        codecs.StreamWriter.reset(self)
+        self.encoder = None
+
+    def encode(self, input, errors='strict'):
+        if self.encoder is None:
+            result = codecs.utf_16_encode(input, errors)
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_16_le_encode
+            else:
+                self.encoder = codecs.utf_16_be_encode
+            return result
+        else:
+            return self.encoder(input, errors)
+
+class StreamReader(codecs.StreamReader):
+
+    def reset(self):
+        codecs.StreamReader.reset(self)
+        try:
+            del self.decode
+        except AttributeError:
+            pass
+
+    def decode(self, input, errors='strict'):
+        (object, consumed, byteorder) = \
+            codecs.utf_16_ex_decode(input, errors, 0, False)
+        if byteorder == -1:
+            self.decode = codecs.utf_16_le_decode
+        elif byteorder == 1:
+            self.decode = codecs.utf_16_be_decode
+        elif consumed>=2:
+            raise UnicodeDecodeError("utf-16", input, 0, 2, "Stream does not start with BOM")
+        return (object, consumed)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-16',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_be.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_be.py
new file mode 100644
index 0000000000000000000000000000000000000000..86b458eb9bcd96b50f128df1978a14f5d1e41835
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_be.py
@@ -0,0 +1,42 @@
+""" Python 'utf-16-be' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_16_be_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_16_be_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_16_be_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_16_be_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_16_be_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_16_be_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-16-be',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_le.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_le.py
new file mode 100644
index 0000000000000000000000000000000000000000..ec454142eedf251e31eab481a1cbea6424273a0a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_16_le.py
@@ -0,0 +1,42 @@
+""" Python 'utf-16-le' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_16_le_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_16_le_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_16_le_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_16_le_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_16_le_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_16_le_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-16-le',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32.py
new file mode 100644
index 0000000000000000000000000000000000000000..1924bedbb74c686d80d36aa0032948d31e28f977
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32.py
@@ -0,0 +1,150 @@
+"""
+Python 'utf-32' Codec
+"""
+import codecs, sys
+
+### Codec APIs
+
+encode = codecs.utf_32_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_32_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict'):
+        codecs.IncrementalEncoder.__init__(self, errors)
+        self.encoder = None
+
+    def encode(self, input, final=False):
+        if self.encoder is None:
+            result = codecs.utf_32_encode(input, self.errors)[0]
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_32_le_encode
+            else:
+                self.encoder = codecs.utf_32_be_encode
+            return result
+        return self.encoder(input, self.errors)[0]
+
+    def reset(self):
+        codecs.IncrementalEncoder.reset(self)
+        self.encoder = None
+
+    def getstate(self):
+        # state info we return to the caller:
+        # 0: stream is in natural order for this platform
+        # 2: endianness hasn't been determined yet
+        # (we're never writing in unnatural order)
+        return (2 if self.encoder is None else 0)
+
+    def setstate(self, state):
+        if state:
+            self.encoder = None
+        else:
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_32_le_encode
+            else:
+                self.encoder = codecs.utf_32_be_encode
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def __init__(self, errors='strict'):
+        codecs.BufferedIncrementalDecoder.__init__(self, errors)
+        self.decoder = None
+
+    def _buffer_decode(self, input, errors, final):
+        if self.decoder is None:
+            (output, consumed, byteorder) = \
+                codecs.utf_32_ex_decode(input, errors, 0, final)
+            if byteorder == -1:
+                self.decoder = codecs.utf_32_le_decode
+            elif byteorder == 1:
+                self.decoder = codecs.utf_32_be_decode
+            elif consumed >= 4:
+                raise UnicodeDecodeError("utf-32", input, 0, 4, "Stream does not start with BOM")
+            return (output, consumed)
+        return self.decoder(input, self.errors, final)
+
+    def reset(self):
+        codecs.BufferedIncrementalDecoder.reset(self)
+        self.decoder = None
+
+    def getstate(self):
+        # additional state info from the base class must be None here,
+        # as it isn't passed along to the caller
+        state = codecs.BufferedIncrementalDecoder.getstate(self)[0]
+        # additional state info we pass to the caller:
+        # 0: stream is in natural order for this platform
+        # 1: stream is in unnatural order
+        # 2: endianness hasn't been determined yet
+        if self.decoder is None:
+            return (state, 2)
+        addstate = int((sys.byteorder == "big") !=
+                       (self.decoder is codecs.utf_32_be_decode))
+        return (state, addstate)
+
+    def setstate(self, state):
+        # state[1] will be ignored by BufferedIncrementalDecoder.setstate()
+        codecs.BufferedIncrementalDecoder.setstate(self, state)
+        state = state[1]
+        if state == 0:
+            self.decoder = (codecs.utf_32_be_decode
+                            if sys.byteorder == "big"
+                            else codecs.utf_32_le_decode)
+        elif state == 1:
+            self.decoder = (codecs.utf_32_le_decode
+                            if sys.byteorder == "big"
+                            else codecs.utf_32_be_decode)
+        else:
+            self.decoder = None
+
+class StreamWriter(codecs.StreamWriter):
+    def __init__(self, stream, errors='strict'):
+        self.encoder = None
+        codecs.StreamWriter.__init__(self, stream, errors)
+
+    def reset(self):
+        codecs.StreamWriter.reset(self)
+        self.encoder = None
+
+    def encode(self, input, errors='strict'):
+        if self.encoder is None:
+            result = codecs.utf_32_encode(input, errors)
+            if sys.byteorder == 'little':
+                self.encoder = codecs.utf_32_le_encode
+            else:
+                self.encoder = codecs.utf_32_be_encode
+            return result
+        else:
+            return self.encoder(input, errors)
+
+class StreamReader(codecs.StreamReader):
+
+    def reset(self):
+        codecs.StreamReader.reset(self)
+        try:
+            del self.decode
+        except AttributeError:
+            pass
+
+    def decode(self, input, errors='strict'):
+        (object, consumed, byteorder) = \
+            codecs.utf_32_ex_decode(input, errors, 0, False)
+        if byteorder == -1:
+            self.decode = codecs.utf_32_le_decode
+        elif byteorder == 1:
+            self.decode = codecs.utf_32_be_decode
+        elif consumed >= 4:
+            raise UnicodeDecodeError("utf-32", input, 0, 4, "Stream does not start with BOM")
+        return (object, consumed)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-32',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_be.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_be.py
new file mode 100644
index 0000000000000000000000000000000000000000..fe272b5fafec69e506c7cb398712d7b6dd9e6145
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_be.py
@@ -0,0 +1,37 @@
+"""
+Python 'utf-32-be' Codec
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_32_be_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_32_be_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_32_be_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_32_be_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_32_be_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_32_be_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-32-be',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_le.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_le.py
new file mode 100644
index 0000000000000000000000000000000000000000..9e48210928ee652b17fe797785a20267b1d12a6e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_32_le.py
@@ -0,0 +1,37 @@
+"""
+Python 'utf-32-le' Codec
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_32_le_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_32_le_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_32_le_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_32_le_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_32_le_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_32_le_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-32-le',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_7.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_7.py
new file mode 100644
index 0000000000000000000000000000000000000000..8e0567f2087d65e33b3152b8240bcaf703d855fb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_7.py
@@ -0,0 +1,38 @@
+""" Python 'utf-7' Codec
+
+Written by Brian Quinlan (brian@sweetapp.com).
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_7_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_7_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_7_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_7_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_7_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_7_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-7',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8.py
new file mode 100644
index 0000000000000000000000000000000000000000..1bf6336571547bcec3f5aa7978ff1c7f247490ce
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8.py
@@ -0,0 +1,42 @@
+""" Python 'utf-8' Codec
+
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+
+(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
+
+"""
+import codecs
+
+### Codec APIs
+
+encode = codecs.utf_8_encode
+
+def decode(input, errors='strict'):
+    return codecs.utf_8_decode(input, errors, True)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return codecs.utf_8_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    _buffer_decode = codecs.utf_8_decode
+
+class StreamWriter(codecs.StreamWriter):
+    encode = codecs.utf_8_encode
+
+class StreamReader(codecs.StreamReader):
+    decode = codecs.utf_8_decode
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-8',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8_sig.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8_sig.py
new file mode 100644
index 0000000000000000000000000000000000000000..1bb479203f365dabd6cc59bb0b6debef55e40396
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/utf_8_sig.py
@@ -0,0 +1,130 @@
+""" Python 'utf-8-sig' Codec
+This work similar to UTF-8 with the following changes:
+
+* On encoding/writing a UTF-8 encoded BOM will be prepended/written as the
+  first three bytes.
+
+* On decoding/reading if the first three bytes are a UTF-8 encoded BOM, these
+  bytes will be skipped.
+"""
+import codecs
+
+### Codec APIs
+
+def encode(input, errors='strict'):
+    return (codecs.BOM_UTF8 + codecs.utf_8_encode(input, errors)[0],
+            len(input))
+
+def decode(input, errors='strict'):
+    prefix = 0
+    if input[:3] == codecs.BOM_UTF8:
+        input = input[3:]
+        prefix = 3
+    (output, consumed) = codecs.utf_8_decode(input, errors, True)
+    return (output, consumed+prefix)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict'):
+        codecs.IncrementalEncoder.__init__(self, errors)
+        self.first = 1
+
+    def encode(self, input, final=False):
+        if self.first:
+            self.first = 0
+            return codecs.BOM_UTF8 + \
+                   codecs.utf_8_encode(input, self.errors)[0]
+        else:
+            return codecs.utf_8_encode(input, self.errors)[0]
+
+    def reset(self):
+        codecs.IncrementalEncoder.reset(self)
+        self.first = 1
+
+    def getstate(self):
+        return self.first
+
+    def setstate(self, state):
+        self.first = state
+
+class IncrementalDecoder(codecs.BufferedIncrementalDecoder):
+    def __init__(self, errors='strict'):
+        codecs.BufferedIncrementalDecoder.__init__(self, errors)
+        self.first = 1
+
+    def _buffer_decode(self, input, errors, final):
+        if self.first:
+            if len(input) < 3:
+                if codecs.BOM_UTF8.startswith(input):
+                    # not enough data to decide if this really is a BOM
+                    # => try again on the next call
+                    return ("", 0)
+                else:
+                    self.first = 0
+            else:
+                self.first = 0
+                if input[:3] == codecs.BOM_UTF8:
+                    (output, consumed) = \
+                       codecs.utf_8_decode(input[3:], errors, final)
+                    return (output, consumed+3)
+        return codecs.utf_8_decode(input, errors, final)
+
+    def reset(self):
+        codecs.BufferedIncrementalDecoder.reset(self)
+        self.first = 1
+
+    def getstate(self):
+        state = codecs.BufferedIncrementalDecoder.getstate(self)
+        # state[1] must be 0 here, as it isn't passed along to the caller
+        return (state[0], self.first)
+
+    def setstate(self, state):
+        # state[1] will be ignored by BufferedIncrementalDecoder.setstate()
+        codecs.BufferedIncrementalDecoder.setstate(self, state)
+        self.first = state[1]
+
+class StreamWriter(codecs.StreamWriter):
+    def reset(self):
+        codecs.StreamWriter.reset(self)
+        try:
+            del self.encode
+        except AttributeError:
+            pass
+
+    def encode(self, input, errors='strict'):
+        self.encode = codecs.utf_8_encode
+        return encode(input, errors)
+
+class StreamReader(codecs.StreamReader):
+    def reset(self):
+        codecs.StreamReader.reset(self)
+        try:
+            del self.decode
+        except AttributeError:
+            pass
+
+    def decode(self, input, errors='strict'):
+        if len(input) < 3:
+            if codecs.BOM_UTF8.startswith(input):
+                # not enough data to decide if this is a BOM
+                # => try again on the next call
+                return ("", 0)
+        elif input[:3] == codecs.BOM_UTF8:
+            self.decode = codecs.utf_8_decode
+            (output, consumed) = codecs.utf_8_decode(input[3:],errors)
+            return (output, consumed+3)
+        # (else) no BOM present
+        self.decode = codecs.utf_8_decode
+        return codecs.utf_8_decode(input, errors)
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='utf-8-sig',
+        encode=encode,
+        decode=decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/uu_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/uu_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..4e58c62fe9ef0f37576e8c10b19bf5abc454239c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/uu_codec.py
@@ -0,0 +1,103 @@
+"""Python 'uu_codec' Codec - UU content transfer encoding.
+
+This codec de/encodes from bytes to bytes.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com). Some details were
+adapted from uu.py which was written by Lance Ellinghouse and
+modified by Jack Jansen and Fredrik Lundh.
+"""
+
+import codecs
+import binascii
+from io import BytesIO
+
+### Codec APIs
+
+def uu_encode(input, errors='strict', filename='<data>', mode=0o666):
+    assert errors == 'strict'
+    infile = BytesIO(input)
+    outfile = BytesIO()
+    read = infile.read
+    write = outfile.write
+
+    # Remove newline chars from filename
+    filename = filename.replace('\n','\\n')
+    filename = filename.replace('\r','\\r')
+
+    # Encode
+    write(('begin %o %s\n' % (mode & 0o777, filename)).encode('ascii'))
+    chunk = read(45)
+    while chunk:
+        write(binascii.b2a_uu(chunk))
+        chunk = read(45)
+    write(b' \nend\n')
+
+    return (outfile.getvalue(), len(input))
+
+def uu_decode(input, errors='strict'):
+    assert errors == 'strict'
+    infile = BytesIO(input)
+    outfile = BytesIO()
+    readline = infile.readline
+    write = outfile.write
+
+    # Find start of encoded data
+    while 1:
+        s = readline()
+        if not s:
+            raise ValueError('Missing "begin" line in input data')
+        if s[:5] == b'begin':
+            break
+
+    # Decode
+    while True:
+        s = readline()
+        if not s or s == b'end\n':
+            break
+        try:
+            data = binascii.a2b_uu(s)
+        except binascii.Error as v:
+            # Workaround for broken uuencoders by /Fredrik Lundh
+            nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
+            data = binascii.a2b_uu(s[:nbytes])
+            #sys.stderr.write("Warning: %s\n" % str(v))
+        write(data)
+    if not s:
+        raise ValueError('Truncated input data')
+
+    return (outfile.getvalue(), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return uu_encode(input, errors)
+
+    def decode(self, input, errors='strict'):
+        return uu_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def encode(self, input, final=False):
+        return uu_encode(input, self.errors)[0]
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def decode(self, input, final=False):
+        return uu_decode(input, self.errors)[0]
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='uu',
+        encode=uu_encode,
+        decode=uu_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/zlib_codec.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/zlib_codec.py
new file mode 100644
index 0000000000000000000000000000000000000000..95908a4b4a13a1db70763974cf714d01b25d0ceb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/encodings/zlib_codec.py
@@ -0,0 +1,77 @@
+"""Python 'zlib_codec' Codec - zlib compression encoding.
+
+This codec de/encodes from bytes to bytes.
+
+Written by Marc-Andre Lemburg (mal@lemburg.com).
+"""
+
+import codecs
+import zlib # this codec needs the optional zlib module !
+
+### Codec APIs
+
+def zlib_encode(input, errors='strict'):
+    assert errors == 'strict'
+    return (zlib.compress(input), len(input))
+
+def zlib_decode(input, errors='strict'):
+    assert errors == 'strict'
+    return (zlib.decompress(input), len(input))
+
+class Codec(codecs.Codec):
+    def encode(self, input, errors='strict'):
+        return zlib_encode(input, errors)
+    def decode(self, input, errors='strict'):
+        return zlib_decode(input, errors)
+
+class IncrementalEncoder(codecs.IncrementalEncoder):
+    def __init__(self, errors='strict'):
+        assert errors == 'strict'
+        self.errors = errors
+        self.compressobj = zlib.compressobj()
+
+    def encode(self, input, final=False):
+        if final:
+            c = self.compressobj.compress(input)
+            return c + self.compressobj.flush()
+        else:
+            return self.compressobj.compress(input)
+
+    def reset(self):
+        self.compressobj = zlib.compressobj()
+
+class IncrementalDecoder(codecs.IncrementalDecoder):
+    def __init__(self, errors='strict'):
+        assert errors == 'strict'
+        self.errors = errors
+        self.decompressobj = zlib.decompressobj()
+
+    def decode(self, input, final=False):
+        if final:
+            c = self.decompressobj.decompress(input)
+            return c + self.decompressobj.flush()
+        else:
+            return self.decompressobj.decompress(input)
+
+    def reset(self):
+        self.decompressobj = zlib.decompressobj()
+
+class StreamWriter(Codec, codecs.StreamWriter):
+    charbuffertype = bytes
+
+class StreamReader(Codec, codecs.StreamReader):
+    charbuffertype = bytes
+
+### encodings module API
+
+def getregentry():
+    return codecs.CodecInfo(
+        name='zlib',
+        encode=zlib_encode,
+        decode=zlib_decode,
+        incrementalencoder=IncrementalEncoder,
+        incrementaldecoder=IncrementalDecoder,
+        streamreader=StreamReader,
+        streamwriter=StreamWriter,
+        _is_text_encoding=False,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..715389ea6c58bc89c6222253427522e833898ba9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__init__.py
@@ -0,0 +1,265 @@
+import os
+import subprocess
+import sys
+import sysconfig
+import tempfile
+from contextlib import nullcontext
+from importlib import resources
+from pathlib import Path
+from shutil import copy2
+
+
+__all__ = ["version", "bootstrap"]
+_PIP_VERSION = "26.0.1"
+
+# Directory of system wheel packages. Some Linux distribution packaging
+# policies recommend against bundling dependencies. For example, Fedora
+# installs wheel packages in the /usr/share/python-wheels/ directory and don't
+# install the ensurepip._bundled package.
+_pkg_dir = sysconfig.get_config_var('WHEEL_PKG_DIR')
+if _pkg_dir:
+    _WHEEL_PKG_DIR = Path(_pkg_dir).resolve()
+else:
+    _WHEEL_PKG_DIR = None
+
+
+def _find_wheel_pkg_dir_pip():
+    if _WHEEL_PKG_DIR is None:
+        # NOTE: The compile-time `WHEEL_PKG_DIR` is unset so there is no place
+        # NOTE: for looking up the wheels.
+        return None
+
+    dist_matching_wheels = _WHEEL_PKG_DIR.glob('pip-*.whl')
+    try:
+        last_matching_dist_wheel = sorted(dist_matching_wheels)[-1]
+    except IndexError:
+        # NOTE: `WHEEL_PKG_DIR` does not contain any wheel files for `pip`.
+        return None
+
+    return nullcontext(last_matching_dist_wheel)
+
+
+def _get_pip_whl_path_ctx():
+    # Prefer pip from the wheel package directory, if present.
+    if (alternative_pip_wheel_path := _find_wheel_pkg_dir_pip()) is not None:
+        return alternative_pip_wheel_path
+
+    return resources.as_file(
+        resources.files('ensurepip')
+        / '_bundled'
+        / f'pip-{_PIP_VERSION}-py3-none-any.whl'
+    )
+
+
+def _get_pip_version():
+    with _get_pip_whl_path_ctx() as bundled_wheel_path:
+        wheel_name = bundled_wheel_path.name
+        return (
+            # Extract '21.2.4' from 'pip-21.2.4-py3-none-any.whl'
+            wheel_name.
+            removeprefix('pip-').
+            partition('-')[0]
+        )
+
+
+def _run_pip(args, additional_paths=None):
+    # Run the bootstrapping in a subprocess to avoid leaking any state that happens
+    # after pip has executed. Particularly, this avoids the case when pip holds onto
+    # the files in *additional_paths*, preventing us to remove them at the end of the
+    # invocation.
+    code = f"""
+import runpy
+import sys
+sys.path = {additional_paths or []} + sys.path
+sys.argv[1:] = {args}
+runpy.run_module("pip", run_name="__main__", alter_sys=True)
+"""
+
+    cmd = [
+        sys.executable,
+        '-W',
+        'ignore::DeprecationWarning',
+        '-c',
+        code,
+    ]
+    if sys.flags.isolated:
+        # run code in isolated mode if currently running isolated
+        cmd.insert(1, '-I')
+    return subprocess.run(cmd, check=True).returncode
+
+
+def version():
+    """
+    Returns a string specifying the bundled version of pip.
+    """
+    return _get_pip_version()
+
+
+def _disable_pip_configuration_settings():
+    # We deliberately ignore all pip environment variables
+    # when invoking pip
+    # See http://bugs.python.org/issue19734 for details
+    keys_to_remove = [k for k in os.environ if k.startswith("PIP_")]
+    for k in keys_to_remove:
+        del os.environ[k]
+    # We also ignore the settings in the default pip configuration file
+    # See http://bugs.python.org/issue20053 for details
+    os.environ['PIP_CONFIG_FILE'] = os.devnull
+
+
+def bootstrap(*, root=None, upgrade=False, user=False,
+              altinstall=False, default_pip=False,
+              verbosity=0):
+    """
+    Bootstrap pip into the current Python installation (or the given root
+    directory).
+
+    Note that calling this function will alter both sys.path and os.environ.
+    """
+    # Discard the return value
+    _bootstrap(root=root, upgrade=upgrade, user=user,
+               altinstall=altinstall, default_pip=default_pip,
+               verbosity=verbosity)
+
+
+def _bootstrap(*, root=None, upgrade=False, user=False,
+              altinstall=False, default_pip=False,
+              verbosity=0):
+    """
+    Bootstrap pip into the current Python installation (or the given root
+    directory). Returns pip command status code.
+
+    Note that calling this function will alter both sys.path and os.environ.
+    """
+    if altinstall and default_pip:
+        raise ValueError("Cannot use altinstall and default_pip together")
+
+    sys.audit("ensurepip.bootstrap", root)
+
+    _disable_pip_configuration_settings()
+
+    # By default, installing pip installs all of the
+    # following scripts (X.Y == running Python version):
+    #
+    #   pip, pipX, pipX.Y
+    #
+    # pip 1.5+ allows ensurepip to request that some of those be left out
+    if altinstall:
+        # omit pip, pipX
+        os.environ["ENSUREPIP_OPTIONS"] = "altinstall"
+    elif not default_pip:
+        # omit pip
+        os.environ["ENSUREPIP_OPTIONS"] = "install"
+
+    with tempfile.TemporaryDirectory() as tmpdir:
+        # Put our bundled wheels into a temporary directory and construct the
+        # additional paths that need added to sys.path
+        tmpdir_path = Path(tmpdir)
+        with _get_pip_whl_path_ctx() as bundled_wheel_path:
+            tmp_wheel_path = tmpdir_path / bundled_wheel_path.name
+            copy2(bundled_wheel_path, tmp_wheel_path)
+
+        # Construct the arguments to be passed to the pip command
+        args = ["install", "--no-cache-dir", "--no-index", "--find-links", tmpdir]
+        if root:
+            args += ["--root", root]
+        if upgrade:
+            args += ["--upgrade"]
+        if user:
+            args += ["--user"]
+        if verbosity:
+            args += ["-" + "v" * verbosity]
+
+        return _run_pip([*args, "pip"], [os.fsdecode(tmp_wheel_path)])
+
+
+def _uninstall_helper(*, verbosity=0):
+    """Helper to support a clean default uninstall process on Windows
+
+    Note that calling this function may alter os.environ.
+    """
+    # Nothing to do if pip was never installed, or has been removed
+    try:
+        import pip
+    except ImportError:
+        return
+
+    # If the installed pip version doesn't match the available one,
+    # leave it alone
+    available_version = version()
+    if pip.__version__ != available_version:
+        print(f"ensurepip will only uninstall a matching version "
+              f"({pip.__version__!r} installed, "
+              f"{available_version!r} available)",
+              file=sys.stderr)
+        return
+
+    _disable_pip_configuration_settings()
+
+    # Construct the arguments to be passed to the pip command
+    args = ["uninstall", "-y", "--disable-pip-version-check"]
+    if verbosity:
+        args += ["-" + "v" * verbosity]
+
+    return _run_pip([*args, "pip"])
+
+
+def _main(argv=None):
+    import argparse
+    parser = argparse.ArgumentParser(color=True)
+    parser.add_argument(
+        "--version",
+        action="version",
+        version="pip {}".format(version()),
+        help="Show the version of pip that is bundled with this Python.",
+    )
+    parser.add_argument(
+        "-v", "--verbose",
+        action="count",
+        default=0,
+        dest="verbosity",
+        help=("Give more output. Option is additive, and can be used up to 3 "
+              "times."),
+    )
+    parser.add_argument(
+        "-U", "--upgrade",
+        action="store_true",
+        default=False,
+        help="Upgrade pip and dependencies, even if already installed.",
+    )
+    parser.add_argument(
+        "--user",
+        action="store_true",
+        default=False,
+        help="Install using the user scheme.",
+    )
+    parser.add_argument(
+        "--root",
+        default=None,
+        help="Install everything relative to this alternate root directory.",
+    )
+    parser.add_argument(
+        "--altinstall",
+        action="store_true",
+        default=False,
+        help=("Make an alternate install, installing only the X.Y versioned "
+              "scripts (Default: pipX, pipX.Y)."),
+    )
+    parser.add_argument(
+        "--default-pip",
+        action="store_true",
+        default=False,
+        help=("Make a default pip install, installing the unqualified pip "
+              "in addition to the versioned scripts."),
+    )
+
+    args = parser.parse_args(argv)
+
+    return _bootstrap(
+        root=args.root,
+        upgrade=args.upgrade,
+        user=args.user,
+        verbosity=args.verbosity,
+        altinstall=args.altinstall,
+        default_pip=args.default_pip,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..03eef0dd94d0b77764cbd737f69945d04e4b1bc6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/__main__.py
@@ -0,0 +1,5 @@
+import ensurepip
+import sys
+
+if __name__ == "__main__":
+    sys.exit(ensurepip._main())
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/_uninstall.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/_uninstall.py
new file mode 100644
index 0000000000000000000000000000000000000000..4183c28a809008fd1121b9e2051469f69ad9d20f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/ensurepip/_uninstall.py
@@ -0,0 +1,31 @@
+"""Basic pip uninstallation support, helper for the Windows uninstaller"""
+
+import argparse
+import ensurepip
+import sys
+
+
+def _main(argv=None):
+    parser = argparse.ArgumentParser()
+    parser.add_argument(
+        "--version",
+        action="version",
+        version="pip {}".format(ensurepip.version()),
+        help="Show the version of pip this will attempt to uninstall.",
+    )
+    parser.add_argument(
+        "-v", "--verbose",
+        action="count",
+        default=0,
+        dest="verbosity",
+        help=("Give more output. Option is additive, and can be used up to 3 "
+              "times."),
+    )
+
+    args = parser.parse_args(argv)
+
+    return ensurepip._uninstall_helper(verbosity=args.verbosity)
+
+
+if __name__ == "__main__":
+    sys.exit(_main())
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..1543460ca33b0ae92b22780a4041dc36251f49a2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/__init__.py
@@ -0,0 +1,132 @@
+"""
+General functions for HTML manipulation.
+"""
+
+import re as _re
+from html.entities import html5 as _html5
+
+
+__all__ = ['escape', 'unescape']
+
+
+def escape(s, quote=True):
+    """
+    Replace special characters "&", "<" and ">" to HTML-safe sequences.
+    If the optional flag quote is true (the default), the quotation mark
+    characters, both double quote (") and single quote (') characters are also
+    translated.
+    """
+    s = s.replace("&", "&amp;") # Must be done first!
+    s = s.replace("<", "&lt;")
+    s = s.replace(">", "&gt;")
+    if quote:
+        s = s.replace('"', "&quot;")
+        s = s.replace('\'', "&#x27;")
+    return s
+
+
+# see https://html.spec.whatwg.org/multipage/parsing.html#numeric-character-reference-end-state
+
+_invalid_charrefs = {
+    0x00: '\ufffd',  # REPLACEMENT CHARACTER
+    0x0d: '\r',      # CARRIAGE RETURN
+    0x80: '\u20ac',  # EURO SIGN
+    0x81: '\x81',    # <control>
+    0x82: '\u201a',  # SINGLE LOW-9 QUOTATION MARK
+    0x83: '\u0192',  # LATIN SMALL LETTER F WITH HOOK
+    0x84: '\u201e',  # DOUBLE LOW-9 QUOTATION MARK
+    0x85: '\u2026',  # HORIZONTAL ELLIPSIS
+    0x86: '\u2020',  # DAGGER
+    0x87: '\u2021',  # DOUBLE DAGGER
+    0x88: '\u02c6',  # MODIFIER LETTER CIRCUMFLEX ACCENT
+    0x89: '\u2030',  # PER MILLE SIGN
+    0x8a: '\u0160',  # LATIN CAPITAL LETTER S WITH CARON
+    0x8b: '\u2039',  # SINGLE LEFT-POINTING ANGLE QUOTATION MARK
+    0x8c: '\u0152',  # LATIN CAPITAL LIGATURE OE
+    0x8d: '\x8d',    # <control>
+    0x8e: '\u017d',  # LATIN CAPITAL LETTER Z WITH CARON
+    0x8f: '\x8f',    # <control>
+    0x90: '\x90',    # <control>
+    0x91: '\u2018',  # LEFT SINGLE QUOTATION MARK
+    0x92: '\u2019',  # RIGHT SINGLE QUOTATION MARK
+    0x93: '\u201c',  # LEFT DOUBLE QUOTATION MARK
+    0x94: '\u201d',  # RIGHT DOUBLE QUOTATION MARK
+    0x95: '\u2022',  # BULLET
+    0x96: '\u2013',  # EN DASH
+    0x97: '\u2014',  # EM DASH
+    0x98: '\u02dc',  # SMALL TILDE
+    0x99: '\u2122',  # TRADE MARK SIGN
+    0x9a: '\u0161',  # LATIN SMALL LETTER S WITH CARON
+    0x9b: '\u203a',  # SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
+    0x9c: '\u0153',  # LATIN SMALL LIGATURE OE
+    0x9d: '\x9d',    # <control>
+    0x9e: '\u017e',  # LATIN SMALL LETTER Z WITH CARON
+    0x9f: '\u0178',  # LATIN CAPITAL LETTER Y WITH DIAERESIS
+}
+
+_invalid_codepoints = {
+    # 0x0001 to 0x0008
+    0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8,
+    # 0x000E to 0x001F
+    0xe, 0xf, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19,
+    0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+    # 0x007F to 0x009F
+    0x7f, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a,
+    0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96,
+    0x97, 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
+    # 0xFDD0 to 0xFDEF
+    0xfdd0, 0xfdd1, 0xfdd2, 0xfdd3, 0xfdd4, 0xfdd5, 0xfdd6, 0xfdd7, 0xfdd8,
+    0xfdd9, 0xfdda, 0xfddb, 0xfddc, 0xfddd, 0xfdde, 0xfddf, 0xfde0, 0xfde1,
+    0xfde2, 0xfde3, 0xfde4, 0xfde5, 0xfde6, 0xfde7, 0xfde8, 0xfde9, 0xfdea,
+    0xfdeb, 0xfdec, 0xfded, 0xfdee, 0xfdef,
+    # others
+    0xb, 0xfffe, 0xffff, 0x1fffe, 0x1ffff, 0x2fffe, 0x2ffff, 0x3fffe, 0x3ffff,
+    0x4fffe, 0x4ffff, 0x5fffe, 0x5ffff, 0x6fffe, 0x6ffff, 0x7fffe, 0x7ffff,
+    0x8fffe, 0x8ffff, 0x9fffe, 0x9ffff, 0xafffe, 0xaffff, 0xbfffe, 0xbffff,
+    0xcfffe, 0xcffff, 0xdfffe, 0xdffff, 0xefffe, 0xeffff, 0xffffe, 0xfffff,
+    0x10fffe, 0x10ffff
+}
+
+
+def _replace_charref(s):
+    s = s.group(1)
+    if s[0] == '#':
+        # numeric charref
+        if s[1] in 'xX':
+            num = int(s[2:].rstrip(';'), 16)
+        else:
+            num = int(s[1:].rstrip(';'))
+        if num in _invalid_charrefs:
+            return _invalid_charrefs[num]
+        if 0xD800 <= num <= 0xDFFF or num > 0x10FFFF:
+            return '\uFFFD'
+        if num in _invalid_codepoints:
+            return ''
+        return chr(num)
+    else:
+        # named charref
+        if s in _html5:
+            return _html5[s]
+        # find the longest matching name (as defined by the standard)
+        for x in range(len(s)-1, 1, -1):
+            if s[:x] in _html5:
+                return _html5[s[:x]] + s[x:]
+        else:
+            return '&' + s
+
+
+_charref = _re.compile(r'&(#[0-9]+;?'
+                       r'|#[xX][0-9a-fA-F]+;?'
+                       r'|[^\t\n\f <&#;]{1,32};?)')
+
+def unescape(s):
+    """
+    Convert all named and numeric character references (e.g. &gt;, &#62;,
+    &x3e;) in the string s to the corresponding unicode characters.
+    This function uses the rules defined by the HTML 5 standard
+    for both valid and invalid character references, and the list of
+    HTML 5 named character references defined in html.entities.html5.
+    """
+    if '&' not in s:
+        return s
+    return _charref.sub(_replace_charref, s)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/entities.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/entities.py
new file mode 100644
index 0000000000000000000000000000000000000000..eb6dc12190586d90d8e8070e9065a6f6f243e260
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/entities.py
@@ -0,0 +1,2513 @@
+"""HTML character entity references."""
+
+__all__ = ['html5', 'name2codepoint', 'codepoint2name', 'entitydefs']
+
+
+# maps HTML4 entity name to the Unicode code point
+name2codepoint = {
+    'AElig':    0x00c6, # latin capital letter AE = latin capital ligature AE, U+00C6 ISOlat1
+    'Aacute':   0x00c1, # latin capital letter A with acute, U+00C1 ISOlat1
+    'Acirc':    0x00c2, # latin capital letter A with circumflex, U+00C2 ISOlat1
+    'Agrave':   0x00c0, # latin capital letter A with grave = latin capital letter A grave, U+00C0 ISOlat1
+    'Alpha':    0x0391, # greek capital letter alpha, U+0391
+    'Aring':    0x00c5, # latin capital letter A with ring above = latin capital letter A ring, U+00C5 ISOlat1
+    'Atilde':   0x00c3, # latin capital letter A with tilde, U+00C3 ISOlat1
+    'Auml':     0x00c4, # latin capital letter A with diaeresis, U+00C4 ISOlat1
+    'Beta':     0x0392, # greek capital letter beta, U+0392
+    'Ccedil':   0x00c7, # latin capital letter C with cedilla, U+00C7 ISOlat1
+    'Chi':      0x03a7, # greek capital letter chi, U+03A7
+    'Dagger':   0x2021, # double dagger, U+2021 ISOpub
+    'Delta':    0x0394, # greek capital letter delta, U+0394 ISOgrk3
+    'ETH':      0x00d0, # latin capital letter ETH, U+00D0 ISOlat1
+    'Eacute':   0x00c9, # latin capital letter E with acute, U+00C9 ISOlat1
+    'Ecirc':    0x00ca, # latin capital letter E with circumflex, U+00CA ISOlat1
+    'Egrave':   0x00c8, # latin capital letter E with grave, U+00C8 ISOlat1
+    'Epsilon':  0x0395, # greek capital letter epsilon, U+0395
+    'Eta':      0x0397, # greek capital letter eta, U+0397
+    'Euml':     0x00cb, # latin capital letter E with diaeresis, U+00CB ISOlat1
+    'Gamma':    0x0393, # greek capital letter gamma, U+0393 ISOgrk3
+    'Iacute':   0x00cd, # latin capital letter I with acute, U+00CD ISOlat1
+    'Icirc':    0x00ce, # latin capital letter I with circumflex, U+00CE ISOlat1
+    'Igrave':   0x00cc, # latin capital letter I with grave, U+00CC ISOlat1
+    'Iota':     0x0399, # greek capital letter iota, U+0399
+    'Iuml':     0x00cf, # latin capital letter I with diaeresis, U+00CF ISOlat1
+    'Kappa':    0x039a, # greek capital letter kappa, U+039A
+    'Lambda':   0x039b, # greek capital letter lambda, U+039B ISOgrk3
+    'Mu':       0x039c, # greek capital letter mu, U+039C
+    'Ntilde':   0x00d1, # latin capital letter N with tilde, U+00D1 ISOlat1
+    'Nu':       0x039d, # greek capital letter nu, U+039D
+    'OElig':    0x0152, # latin capital ligature OE, U+0152 ISOlat2
+    'Oacute':   0x00d3, # latin capital letter O with acute, U+00D3 ISOlat1
+    'Ocirc':    0x00d4, # latin capital letter O with circumflex, U+00D4 ISOlat1
+    'Ograve':   0x00d2, # latin capital letter O with grave, U+00D2 ISOlat1
+    'Omega':    0x03a9, # greek capital letter omega, U+03A9 ISOgrk3
+    'Omicron':  0x039f, # greek capital letter omicron, U+039F
+    'Oslash':   0x00d8, # latin capital letter O with stroke = latin capital letter O slash, U+00D8 ISOlat1
+    'Otilde':   0x00d5, # latin capital letter O with tilde, U+00D5 ISOlat1
+    'Ouml':     0x00d6, # latin capital letter O with diaeresis, U+00D6 ISOlat1
+    'Phi':      0x03a6, # greek capital letter phi, U+03A6 ISOgrk3
+    'Pi':       0x03a0, # greek capital letter pi, U+03A0 ISOgrk3
+    'Prime':    0x2033, # double prime = seconds = inches, U+2033 ISOtech
+    'Psi':      0x03a8, # greek capital letter psi, U+03A8 ISOgrk3
+    'Rho':      0x03a1, # greek capital letter rho, U+03A1
+    'Scaron':   0x0160, # latin capital letter S with caron, U+0160 ISOlat2
+    'Sigma':    0x03a3, # greek capital letter sigma, U+03A3 ISOgrk3
+    'THORN':    0x00de, # latin capital letter THORN, U+00DE ISOlat1
+    'Tau':      0x03a4, # greek capital letter tau, U+03A4
+    'Theta':    0x0398, # greek capital letter theta, U+0398 ISOgrk3
+    'Uacute':   0x00da, # latin capital letter U with acute, U+00DA ISOlat1
+    'Ucirc':    0x00db, # latin capital letter U with circumflex, U+00DB ISOlat1
+    'Ugrave':   0x00d9, # latin capital letter U with grave, U+00D9 ISOlat1
+    'Upsilon':  0x03a5, # greek capital letter upsilon, U+03A5 ISOgrk3
+    'Uuml':     0x00dc, # latin capital letter U with diaeresis, U+00DC ISOlat1
+    'Xi':       0x039e, # greek capital letter xi, U+039E ISOgrk3
+    'Yacute':   0x00dd, # latin capital letter Y with acute, U+00DD ISOlat1
+    'Yuml':     0x0178, # latin capital letter Y with diaeresis, U+0178 ISOlat2
+    'Zeta':     0x0396, # greek capital letter zeta, U+0396
+    'aacute':   0x00e1, # latin small letter a with acute, U+00E1 ISOlat1
+    'acirc':    0x00e2, # latin small letter a with circumflex, U+00E2 ISOlat1
+    'acute':    0x00b4, # acute accent = spacing acute, U+00B4 ISOdia
+    'aelig':    0x00e6, # latin small letter ae = latin small ligature ae, U+00E6 ISOlat1
+    'agrave':   0x00e0, # latin small letter a with grave = latin small letter a grave, U+00E0 ISOlat1
+    'alefsym':  0x2135, # alef symbol = first transfinite cardinal, U+2135 NEW
+    'alpha':    0x03b1, # greek small letter alpha, U+03B1 ISOgrk3
+    'amp':      0x0026, # ampersand, U+0026 ISOnum
+    'and':      0x2227, # logical and = wedge, U+2227 ISOtech
+    'ang':      0x2220, # angle, U+2220 ISOamso
+    'aring':    0x00e5, # latin small letter a with ring above = latin small letter a ring, U+00E5 ISOlat1
+    'asymp':    0x2248, # almost equal to = asymptotic to, U+2248 ISOamsr
+    'atilde':   0x00e3, # latin small letter a with tilde, U+00E3 ISOlat1
+    'auml':     0x00e4, # latin small letter a with diaeresis, U+00E4 ISOlat1
+    'bdquo':    0x201e, # double low-9 quotation mark, U+201E NEW
+    'beta':     0x03b2, # greek small letter beta, U+03B2 ISOgrk3
+    'brvbar':   0x00a6, # broken bar = broken vertical bar, U+00A6 ISOnum
+    'bull':     0x2022, # bullet = black small circle, U+2022 ISOpub
+    'cap':      0x2229, # intersection = cap, U+2229 ISOtech
+    'ccedil':   0x00e7, # latin small letter c with cedilla, U+00E7 ISOlat1
+    'cedil':    0x00b8, # cedilla = spacing cedilla, U+00B8 ISOdia
+    'cent':     0x00a2, # cent sign, U+00A2 ISOnum
+    'chi':      0x03c7, # greek small letter chi, U+03C7 ISOgrk3
+    'circ':     0x02c6, # modifier letter circumflex accent, U+02C6 ISOpub
+    'clubs':    0x2663, # black club suit = shamrock, U+2663 ISOpub
+    'cong':     0x2245, # approximately equal to, U+2245 ISOtech
+    'copy':     0x00a9, # copyright sign, U+00A9 ISOnum
+    'crarr':    0x21b5, # downwards arrow with corner leftwards = carriage return, U+21B5 NEW
+    'cup':      0x222a, # union = cup, U+222A ISOtech
+    'curren':   0x00a4, # currency sign, U+00A4 ISOnum
+    'dArr':     0x21d3, # downwards double arrow, U+21D3 ISOamsa
+    'dagger':   0x2020, # dagger, U+2020 ISOpub
+    'darr':     0x2193, # downwards arrow, U+2193 ISOnum
+    'deg':      0x00b0, # degree sign, U+00B0 ISOnum
+    'delta':    0x03b4, # greek small letter delta, U+03B4 ISOgrk3
+    'diams':    0x2666, # black diamond suit, U+2666 ISOpub
+    'divide':   0x00f7, # division sign, U+00F7 ISOnum
+    'eacute':   0x00e9, # latin small letter e with acute, U+00E9 ISOlat1
+    'ecirc':    0x00ea, # latin small letter e with circumflex, U+00EA ISOlat1
+    'egrave':   0x00e8, # latin small letter e with grave, U+00E8 ISOlat1
+    'empty':    0x2205, # empty set = null set = diameter, U+2205 ISOamso
+    'emsp':     0x2003, # em space, U+2003 ISOpub
+    'ensp':     0x2002, # en space, U+2002 ISOpub
+    'epsilon':  0x03b5, # greek small letter epsilon, U+03B5 ISOgrk3
+    'equiv':    0x2261, # identical to, U+2261 ISOtech
+    'eta':      0x03b7, # greek small letter eta, U+03B7 ISOgrk3
+    'eth':      0x00f0, # latin small letter eth, U+00F0 ISOlat1
+    'euml':     0x00eb, # latin small letter e with diaeresis, U+00EB ISOlat1
+    'euro':     0x20ac, # euro sign, U+20AC NEW
+    'exist':    0x2203, # there exists, U+2203 ISOtech
+    'fnof':     0x0192, # latin small f with hook = function = florin, U+0192 ISOtech
+    'forall':   0x2200, # for all, U+2200 ISOtech
+    'frac12':   0x00bd, # vulgar fraction one half = fraction one half, U+00BD ISOnum
+    'frac14':   0x00bc, # vulgar fraction one quarter = fraction one quarter, U+00BC ISOnum
+    'frac34':   0x00be, # vulgar fraction three quarters = fraction three quarters, U+00BE ISOnum
+    'frasl':    0x2044, # fraction slash, U+2044 NEW
+    'gamma':    0x03b3, # greek small letter gamma, U+03B3 ISOgrk3
+    'ge':       0x2265, # greater-than or equal to, U+2265 ISOtech
+    'gt':       0x003e, # greater-than sign, U+003E ISOnum
+    'hArr':     0x21d4, # left right double arrow, U+21D4 ISOamsa
+    'harr':     0x2194, # left right arrow, U+2194 ISOamsa
+    'hearts':   0x2665, # black heart suit = valentine, U+2665 ISOpub
+    'hellip':   0x2026, # horizontal ellipsis = three dot leader, U+2026 ISOpub
+    'iacute':   0x00ed, # latin small letter i with acute, U+00ED ISOlat1
+    'icirc':    0x00ee, # latin small letter i with circumflex, U+00EE ISOlat1
+    'iexcl':    0x00a1, # inverted exclamation mark, U+00A1 ISOnum
+    'igrave':   0x00ec, # latin small letter i with grave, U+00EC ISOlat1
+    'image':    0x2111, # blackletter capital I = imaginary part, U+2111 ISOamso
+    'infin':    0x221e, # infinity, U+221E ISOtech
+    'int':      0x222b, # integral, U+222B ISOtech
+    'iota':     0x03b9, # greek small letter iota, U+03B9 ISOgrk3
+    'iquest':   0x00bf, # inverted question mark = turned question mark, U+00BF ISOnum
+    'isin':     0x2208, # element of, U+2208 ISOtech
+    'iuml':     0x00ef, # latin small letter i with diaeresis, U+00EF ISOlat1
+    'kappa':    0x03ba, # greek small letter kappa, U+03BA ISOgrk3
+    'lArr':     0x21d0, # leftwards double arrow, U+21D0 ISOtech
+    'lambda':   0x03bb, # greek small letter lambda, U+03BB ISOgrk3
+    'lang':     0x2329, # left-pointing angle bracket = bra, U+2329 ISOtech
+    'laquo':    0x00ab, # left-pointing double angle quotation mark = left pointing guillemet, U+00AB ISOnum
+    'larr':     0x2190, # leftwards arrow, U+2190 ISOnum
+    'lceil':    0x2308, # left ceiling = apl upstile, U+2308 ISOamsc
+    'ldquo':    0x201c, # left double quotation mark, U+201C ISOnum
+    'le':       0x2264, # less-than or equal to, U+2264 ISOtech
+    'lfloor':   0x230a, # left floor = apl downstile, U+230A ISOamsc
+    'lowast':   0x2217, # asterisk operator, U+2217 ISOtech
+    'loz':      0x25ca, # lozenge, U+25CA ISOpub
+    'lrm':      0x200e, # left-to-right mark, U+200E NEW RFC 2070
+    'lsaquo':   0x2039, # single left-pointing angle quotation mark, U+2039 ISO proposed
+    'lsquo':    0x2018, # left single quotation mark, U+2018 ISOnum
+    'lt':       0x003c, # less-than sign, U+003C ISOnum
+    'macr':     0x00af, # macron = spacing macron = overline = APL overbar, U+00AF ISOdia
+    'mdash':    0x2014, # em dash, U+2014 ISOpub
+    'micro':    0x00b5, # micro sign, U+00B5 ISOnum
+    'middot':   0x00b7, # middle dot = Georgian comma = Greek middle dot, U+00B7 ISOnum
+    'minus':    0x2212, # minus sign, U+2212 ISOtech
+    'mu':       0x03bc, # greek small letter mu, U+03BC ISOgrk3
+    'nabla':    0x2207, # nabla = backward difference, U+2207 ISOtech
+    'nbsp':     0x00a0, # no-break space = non-breaking space, U+00A0 ISOnum
+    'ndash':    0x2013, # en dash, U+2013 ISOpub
+    'ne':       0x2260, # not equal to, U+2260 ISOtech
+    'ni':       0x220b, # contains as member, U+220B ISOtech
+    'not':      0x00ac, # not sign, U+00AC ISOnum
+    'notin':    0x2209, # not an element of, U+2209 ISOtech
+    'nsub':     0x2284, # not a subset of, U+2284 ISOamsn
+    'ntilde':   0x00f1, # latin small letter n with tilde, U+00F1 ISOlat1
+    'nu':       0x03bd, # greek small letter nu, U+03BD ISOgrk3
+    'oacute':   0x00f3, # latin small letter o with acute, U+00F3 ISOlat1
+    'ocirc':    0x00f4, # latin small letter o with circumflex, U+00F4 ISOlat1
+    'oelig':    0x0153, # latin small ligature oe, U+0153 ISOlat2
+    'ograve':   0x00f2, # latin small letter o with grave, U+00F2 ISOlat1
+    'oline':    0x203e, # overline = spacing overscore, U+203E NEW
+    'omega':    0x03c9, # greek small letter omega, U+03C9 ISOgrk3
+    'omicron':  0x03bf, # greek small letter omicron, U+03BF NEW
+    'oplus':    0x2295, # circled plus = direct sum, U+2295 ISOamsb
+    'or':       0x2228, # logical or = vee, U+2228 ISOtech
+    'ordf':     0x00aa, # feminine ordinal indicator, U+00AA ISOnum
+    'ordm':     0x00ba, # masculine ordinal indicator, U+00BA ISOnum
+    'oslash':   0x00f8, # latin small letter o with stroke, = latin small letter o slash, U+00F8 ISOlat1
+    'otilde':   0x00f5, # latin small letter o with tilde, U+00F5 ISOlat1
+    'otimes':   0x2297, # circled times = vector product, U+2297 ISOamsb
+    'ouml':     0x00f6, # latin small letter o with diaeresis, U+00F6 ISOlat1
+    'para':     0x00b6, # pilcrow sign = paragraph sign, U+00B6 ISOnum
+    'part':     0x2202, # partial differential, U+2202 ISOtech
+    'permil':   0x2030, # per mille sign, U+2030 ISOtech
+    'perp':     0x22a5, # up tack = orthogonal to = perpendicular, U+22A5 ISOtech
+    'phi':      0x03c6, # greek small letter phi, U+03C6 ISOgrk3
+    'pi':       0x03c0, # greek small letter pi, U+03C0 ISOgrk3
+    'piv':      0x03d6, # greek pi symbol, U+03D6 ISOgrk3
+    'plusmn':   0x00b1, # plus-minus sign = plus-or-minus sign, U+00B1 ISOnum
+    'pound':    0x00a3, # pound sign, U+00A3 ISOnum
+    'prime':    0x2032, # prime = minutes = feet, U+2032 ISOtech
+    'prod':     0x220f, # n-ary product = product sign, U+220F ISOamsb
+    'prop':     0x221d, # proportional to, U+221D ISOtech
+    'psi':      0x03c8, # greek small letter psi, U+03C8 ISOgrk3
+    'quot':     0x0022, # quotation mark = APL quote, U+0022 ISOnum
+    'rArr':     0x21d2, # rightwards double arrow, U+21D2 ISOtech
+    'radic':    0x221a, # square root = radical sign, U+221A ISOtech
+    'rang':     0x232a, # right-pointing angle bracket = ket, U+232A ISOtech
+    'raquo':    0x00bb, # right-pointing double angle quotation mark = right pointing guillemet, U+00BB ISOnum
+    'rarr':     0x2192, # rightwards arrow, U+2192 ISOnum
+    'rceil':    0x2309, # right ceiling, U+2309 ISOamsc
+    'rdquo':    0x201d, # right double quotation mark, U+201D ISOnum
+    'real':     0x211c, # blackletter capital R = real part symbol, U+211C ISOamso
+    'reg':      0x00ae, # registered sign = registered trade mark sign, U+00AE ISOnum
+    'rfloor':   0x230b, # right floor, U+230B ISOamsc
+    'rho':      0x03c1, # greek small letter rho, U+03C1 ISOgrk3
+    'rlm':      0x200f, # right-to-left mark, U+200F NEW RFC 2070
+    'rsaquo':   0x203a, # single right-pointing angle quotation mark, U+203A ISO proposed
+    'rsquo':    0x2019, # right single quotation mark, U+2019 ISOnum
+    'sbquo':    0x201a, # single low-9 quotation mark, U+201A NEW
+    'scaron':   0x0161, # latin small letter s with caron, U+0161 ISOlat2
+    'sdot':     0x22c5, # dot operator, U+22C5 ISOamsb
+    'sect':     0x00a7, # section sign, U+00A7 ISOnum
+    'shy':      0x00ad, # soft hyphen = discretionary hyphen, U+00AD ISOnum
+    'sigma':    0x03c3, # greek small letter sigma, U+03C3 ISOgrk3
+    'sigmaf':   0x03c2, # greek small letter final sigma, U+03C2 ISOgrk3
+    'sim':      0x223c, # tilde operator = varies with = similar to, U+223C ISOtech
+    'spades':   0x2660, # black spade suit, U+2660 ISOpub
+    'sub':      0x2282, # subset of, U+2282 ISOtech
+    'sube':     0x2286, # subset of or equal to, U+2286 ISOtech
+    'sum':      0x2211, # n-ary summation, U+2211 ISOamsb
+    'sup':      0x2283, # superset of, U+2283 ISOtech
+    'sup1':     0x00b9, # superscript one = superscript digit one, U+00B9 ISOnum
+    'sup2':     0x00b2, # superscript two = superscript digit two = squared, U+00B2 ISOnum
+    'sup3':     0x00b3, # superscript three = superscript digit three = cubed, U+00B3 ISOnum
+    'supe':     0x2287, # superset of or equal to, U+2287 ISOtech
+    'szlig':    0x00df, # latin small letter sharp s = ess-zed, U+00DF ISOlat1
+    'tau':      0x03c4, # greek small letter tau, U+03C4 ISOgrk3
+    'there4':   0x2234, # therefore, U+2234 ISOtech
+    'theta':    0x03b8, # greek small letter theta, U+03B8 ISOgrk3
+    'thetasym': 0x03d1, # greek small letter theta symbol, U+03D1 NEW
+    'thinsp':   0x2009, # thin space, U+2009 ISOpub
+    'thorn':    0x00fe, # latin small letter thorn with, U+00FE ISOlat1
+    'tilde':    0x02dc, # small tilde, U+02DC ISOdia
+    'times':    0x00d7, # multiplication sign, U+00D7 ISOnum
+    'trade':    0x2122, # trade mark sign, U+2122 ISOnum
+    'uArr':     0x21d1, # upwards double arrow, U+21D1 ISOamsa
+    'uacute':   0x00fa, # latin small letter u with acute, U+00FA ISOlat1
+    'uarr':     0x2191, # upwards arrow, U+2191 ISOnum
+    'ucirc':    0x00fb, # latin small letter u with circumflex, U+00FB ISOlat1
+    'ugrave':   0x00f9, # latin small letter u with grave, U+00F9 ISOlat1
+    'uml':      0x00a8, # diaeresis = spacing diaeresis, U+00A8 ISOdia
+    'upsih':    0x03d2, # greek upsilon with hook symbol, U+03D2 NEW
+    'upsilon':  0x03c5, # greek small letter upsilon, U+03C5 ISOgrk3
+    'uuml':     0x00fc, # latin small letter u with diaeresis, U+00FC ISOlat1
+    'weierp':   0x2118, # script capital P = power set = Weierstrass p, U+2118 ISOamso
+    'xi':       0x03be, # greek small letter xi, U+03BE ISOgrk3
+    'yacute':   0x00fd, # latin small letter y with acute, U+00FD ISOlat1
+    'yen':      0x00a5, # yen sign = yuan sign, U+00A5 ISOnum
+    'yuml':     0x00ff, # latin small letter y with diaeresis, U+00FF ISOlat1
+    'zeta':     0x03b6, # greek small letter zeta, U+03B6 ISOgrk3
+    'zwj':      0x200d, # zero width joiner, U+200D NEW RFC 2070
+    'zwnj':     0x200c, # zero width non-joiner, U+200C NEW RFC 2070
+}
+
+
+# HTML5 named character references
+# Generated by Tools/build/parse_html5_entities.py
+# from https://html.spec.whatwg.org/entities.json and
+# https://html.spec.whatwg.org/multipage/named-characters.html.
+# Map HTML5 named character references to the equivalent Unicode character(s).
+html5 = {
+    'Aacute': '\xc1',
+    'aacute': '\xe1',
+    'Aacute;': '\xc1',
+    'aacute;': '\xe1',
+    'Abreve;': '\u0102',
+    'abreve;': '\u0103',
+    'ac;': '\u223e',
+    'acd;': '\u223f',
+    'acE;': '\u223e\u0333',
+    'Acirc': '\xc2',
+    'acirc': '\xe2',
+    'Acirc;': '\xc2',
+    'acirc;': '\xe2',
+    'acute': '\xb4',
+    'acute;': '\xb4',
+    'Acy;': '\u0410',
+    'acy;': '\u0430',
+    'AElig': '\xc6',
+    'aelig': '\xe6',
+    'AElig;': '\xc6',
+    'aelig;': '\xe6',
+    'af;': '\u2061',
+    'Afr;': '\U0001d504',
+    'afr;': '\U0001d51e',
+    'Agrave': '\xc0',
+    'agrave': '\xe0',
+    'Agrave;': '\xc0',
+    'agrave;': '\xe0',
+    'alefsym;': '\u2135',
+    'aleph;': '\u2135',
+    'Alpha;': '\u0391',
+    'alpha;': '\u03b1',
+    'Amacr;': '\u0100',
+    'amacr;': '\u0101',
+    'amalg;': '\u2a3f',
+    'AMP': '&',
+    'amp': '&',
+    'AMP;': '&',
+    'amp;': '&',
+    'And;': '\u2a53',
+    'and;': '\u2227',
+    'andand;': '\u2a55',
+    'andd;': '\u2a5c',
+    'andslope;': '\u2a58',
+    'andv;': '\u2a5a',
+    'ang;': '\u2220',
+    'ange;': '\u29a4',
+    'angle;': '\u2220',
+    'angmsd;': '\u2221',
+    'angmsdaa;': '\u29a8',
+    'angmsdab;': '\u29a9',
+    'angmsdac;': '\u29aa',
+    'angmsdad;': '\u29ab',
+    'angmsdae;': '\u29ac',
+    'angmsdaf;': '\u29ad',
+    'angmsdag;': '\u29ae',
+    'angmsdah;': '\u29af',
+    'angrt;': '\u221f',
+    'angrtvb;': '\u22be',
+    'angrtvbd;': '\u299d',
+    'angsph;': '\u2222',
+    'angst;': '\xc5',
+    'angzarr;': '\u237c',
+    'Aogon;': '\u0104',
+    'aogon;': '\u0105',
+    'Aopf;': '\U0001d538',
+    'aopf;': '\U0001d552',
+    'ap;': '\u2248',
+    'apacir;': '\u2a6f',
+    'apE;': '\u2a70',
+    'ape;': '\u224a',
+    'apid;': '\u224b',
+    'apos;': "'",
+    'ApplyFunction;': '\u2061',
+    'approx;': '\u2248',
+    'approxeq;': '\u224a',
+    'Aring': '\xc5',
+    'aring': '\xe5',
+    'Aring;': '\xc5',
+    'aring;': '\xe5',
+    'Ascr;': '\U0001d49c',
+    'ascr;': '\U0001d4b6',
+    'Assign;': '\u2254',
+    'ast;': '*',
+    'asymp;': '\u2248',
+    'asympeq;': '\u224d',
+    'Atilde': '\xc3',
+    'atilde': '\xe3',
+    'Atilde;': '\xc3',
+    'atilde;': '\xe3',
+    'Auml': '\xc4',
+    'auml': '\xe4',
+    'Auml;': '\xc4',
+    'auml;': '\xe4',
+    'awconint;': '\u2233',
+    'awint;': '\u2a11',
+    'backcong;': '\u224c',
+    'backepsilon;': '\u03f6',
+    'backprime;': '\u2035',
+    'backsim;': '\u223d',
+    'backsimeq;': '\u22cd',
+    'Backslash;': '\u2216',
+    'Barv;': '\u2ae7',
+    'barvee;': '\u22bd',
+    'Barwed;': '\u2306',
+    'barwed;': '\u2305',
+    'barwedge;': '\u2305',
+    'bbrk;': '\u23b5',
+    'bbrktbrk;': '\u23b6',
+    'bcong;': '\u224c',
+    'Bcy;': '\u0411',
+    'bcy;': '\u0431',
+    'bdquo;': '\u201e',
+    'becaus;': '\u2235',
+    'Because;': '\u2235',
+    'because;': '\u2235',
+    'bemptyv;': '\u29b0',
+    'bepsi;': '\u03f6',
+    'bernou;': '\u212c',
+    'Bernoullis;': '\u212c',
+    'Beta;': '\u0392',
+    'beta;': '\u03b2',
+    'beth;': '\u2136',
+    'between;': '\u226c',
+    'Bfr;': '\U0001d505',
+    'bfr;': '\U0001d51f',
+    'bigcap;': '\u22c2',
+    'bigcirc;': '\u25ef',
+    'bigcup;': '\u22c3',
+    'bigodot;': '\u2a00',
+    'bigoplus;': '\u2a01',
+    'bigotimes;': '\u2a02',
+    'bigsqcup;': '\u2a06',
+    'bigstar;': '\u2605',
+    'bigtriangledown;': '\u25bd',
+    'bigtriangleup;': '\u25b3',
+    'biguplus;': '\u2a04',
+    'bigvee;': '\u22c1',
+    'bigwedge;': '\u22c0',
+    'bkarow;': '\u290d',
+    'blacklozenge;': '\u29eb',
+    'blacksquare;': '\u25aa',
+    'blacktriangle;': '\u25b4',
+    'blacktriangledown;': '\u25be',
+    'blacktriangleleft;': '\u25c2',
+    'blacktriangleright;': '\u25b8',
+    'blank;': '\u2423',
+    'blk12;': '\u2592',
+    'blk14;': '\u2591',
+    'blk34;': '\u2593',
+    'block;': '\u2588',
+    'bne;': '=\u20e5',
+    'bnequiv;': '\u2261\u20e5',
+    'bNot;': '\u2aed',
+    'bnot;': '\u2310',
+    'Bopf;': '\U0001d539',
+    'bopf;': '\U0001d553',
+    'bot;': '\u22a5',
+    'bottom;': '\u22a5',
+    'bowtie;': '\u22c8',
+    'boxbox;': '\u29c9',
+    'boxDL;': '\u2557',
+    'boxDl;': '\u2556',
+    'boxdL;': '\u2555',
+    'boxdl;': '\u2510',
+    'boxDR;': '\u2554',
+    'boxDr;': '\u2553',
+    'boxdR;': '\u2552',
+    'boxdr;': '\u250c',
+    'boxH;': '\u2550',
+    'boxh;': '\u2500',
+    'boxHD;': '\u2566',
+    'boxHd;': '\u2564',
+    'boxhD;': '\u2565',
+    'boxhd;': '\u252c',
+    'boxHU;': '\u2569',
+    'boxHu;': '\u2567',
+    'boxhU;': '\u2568',
+    'boxhu;': '\u2534',
+    'boxminus;': '\u229f',
+    'boxplus;': '\u229e',
+    'boxtimes;': '\u22a0',
+    'boxUL;': '\u255d',
+    'boxUl;': '\u255c',
+    'boxuL;': '\u255b',
+    'boxul;': '\u2518',
+    'boxUR;': '\u255a',
+    'boxUr;': '\u2559',
+    'boxuR;': '\u2558',
+    'boxur;': '\u2514',
+    'boxV;': '\u2551',
+    'boxv;': '\u2502',
+    'boxVH;': '\u256c',
+    'boxVh;': '\u256b',
+    'boxvH;': '\u256a',
+    'boxvh;': '\u253c',
+    'boxVL;': '\u2563',
+    'boxVl;': '\u2562',
+    'boxvL;': '\u2561',
+    'boxvl;': '\u2524',
+    'boxVR;': '\u2560',
+    'boxVr;': '\u255f',
+    'boxvR;': '\u255e',
+    'boxvr;': '\u251c',
+    'bprime;': '\u2035',
+    'Breve;': '\u02d8',
+    'breve;': '\u02d8',
+    'brvbar': '\xa6',
+    'brvbar;': '\xa6',
+    'Bscr;': '\u212c',
+    'bscr;': '\U0001d4b7',
+    'bsemi;': '\u204f',
+    'bsim;': '\u223d',
+    'bsime;': '\u22cd',
+    'bsol;': '\\',
+    'bsolb;': '\u29c5',
+    'bsolhsub;': '\u27c8',
+    'bull;': '\u2022',
+    'bullet;': '\u2022',
+    'bump;': '\u224e',
+    'bumpE;': '\u2aae',
+    'bumpe;': '\u224f',
+    'Bumpeq;': '\u224e',
+    'bumpeq;': '\u224f',
+    'Cacute;': '\u0106',
+    'cacute;': '\u0107',
+    'Cap;': '\u22d2',
+    'cap;': '\u2229',
+    'capand;': '\u2a44',
+    'capbrcup;': '\u2a49',
+    'capcap;': '\u2a4b',
+    'capcup;': '\u2a47',
+    'capdot;': '\u2a40',
+    'CapitalDifferentialD;': '\u2145',
+    'caps;': '\u2229\ufe00',
+    'caret;': '\u2041',
+    'caron;': '\u02c7',
+    'Cayleys;': '\u212d',
+    'ccaps;': '\u2a4d',
+    'Ccaron;': '\u010c',
+    'ccaron;': '\u010d',
+    'Ccedil': '\xc7',
+    'ccedil': '\xe7',
+    'Ccedil;': '\xc7',
+    'ccedil;': '\xe7',
+    'Ccirc;': '\u0108',
+    'ccirc;': '\u0109',
+    'Cconint;': '\u2230',
+    'ccups;': '\u2a4c',
+    'ccupssm;': '\u2a50',
+    'Cdot;': '\u010a',
+    'cdot;': '\u010b',
+    'cedil': '\xb8',
+    'cedil;': '\xb8',
+    'Cedilla;': '\xb8',
+    'cemptyv;': '\u29b2',
+    'cent': '\xa2',
+    'cent;': '\xa2',
+    'CenterDot;': '\xb7',
+    'centerdot;': '\xb7',
+    'Cfr;': '\u212d',
+    'cfr;': '\U0001d520',
+    'CHcy;': '\u0427',
+    'chcy;': '\u0447',
+    'check;': '\u2713',
+    'checkmark;': '\u2713',
+    'Chi;': '\u03a7',
+    'chi;': '\u03c7',
+    'cir;': '\u25cb',
+    'circ;': '\u02c6',
+    'circeq;': '\u2257',
+    'circlearrowleft;': '\u21ba',
+    'circlearrowright;': '\u21bb',
+    'circledast;': '\u229b',
+    'circledcirc;': '\u229a',
+    'circleddash;': '\u229d',
+    'CircleDot;': '\u2299',
+    'circledR;': '\xae',
+    'circledS;': '\u24c8',
+    'CircleMinus;': '\u2296',
+    'CirclePlus;': '\u2295',
+    'CircleTimes;': '\u2297',
+    'cirE;': '\u29c3',
+    'cire;': '\u2257',
+    'cirfnint;': '\u2a10',
+    'cirmid;': '\u2aef',
+    'cirscir;': '\u29c2',
+    'ClockwiseContourIntegral;': '\u2232',
+    'CloseCurlyDoubleQuote;': '\u201d',
+    'CloseCurlyQuote;': '\u2019',
+    'clubs;': '\u2663',
+    'clubsuit;': '\u2663',
+    'Colon;': '\u2237',
+    'colon;': ':',
+    'Colone;': '\u2a74',
+    'colone;': '\u2254',
+    'coloneq;': '\u2254',
+    'comma;': ',',
+    'commat;': '@',
+    'comp;': '\u2201',
+    'compfn;': '\u2218',
+    'complement;': '\u2201',
+    'complexes;': '\u2102',
+    'cong;': '\u2245',
+    'congdot;': '\u2a6d',
+    'Congruent;': '\u2261',
+    'Conint;': '\u222f',
+    'conint;': '\u222e',
+    'ContourIntegral;': '\u222e',
+    'Copf;': '\u2102',
+    'copf;': '\U0001d554',
+    'coprod;': '\u2210',
+    'Coproduct;': '\u2210',
+    'COPY': '\xa9',
+    'copy': '\xa9',
+    'COPY;': '\xa9',
+    'copy;': '\xa9',
+    'copysr;': '\u2117',
+    'CounterClockwiseContourIntegral;': '\u2233',
+    'crarr;': '\u21b5',
+    'Cross;': '\u2a2f',
+    'cross;': '\u2717',
+    'Cscr;': '\U0001d49e',
+    'cscr;': '\U0001d4b8',
+    'csub;': '\u2acf',
+    'csube;': '\u2ad1',
+    'csup;': '\u2ad0',
+    'csupe;': '\u2ad2',
+    'ctdot;': '\u22ef',
+    'cudarrl;': '\u2938',
+    'cudarrr;': '\u2935',
+    'cuepr;': '\u22de',
+    'cuesc;': '\u22df',
+    'cularr;': '\u21b6',
+    'cularrp;': '\u293d',
+    'Cup;': '\u22d3',
+    'cup;': '\u222a',
+    'cupbrcap;': '\u2a48',
+    'CupCap;': '\u224d',
+    'cupcap;': '\u2a46',
+    'cupcup;': '\u2a4a',
+    'cupdot;': '\u228d',
+    'cupor;': '\u2a45',
+    'cups;': '\u222a\ufe00',
+    'curarr;': '\u21b7',
+    'curarrm;': '\u293c',
+    'curlyeqprec;': '\u22de',
+    'curlyeqsucc;': '\u22df',
+    'curlyvee;': '\u22ce',
+    'curlywedge;': '\u22cf',
+    'curren': '\xa4',
+    'curren;': '\xa4',
+    'curvearrowleft;': '\u21b6',
+    'curvearrowright;': '\u21b7',
+    'cuvee;': '\u22ce',
+    'cuwed;': '\u22cf',
+    'cwconint;': '\u2232',
+    'cwint;': '\u2231',
+    'cylcty;': '\u232d',
+    'Dagger;': '\u2021',
+    'dagger;': '\u2020',
+    'daleth;': '\u2138',
+    'Darr;': '\u21a1',
+    'dArr;': '\u21d3',
+    'darr;': '\u2193',
+    'dash;': '\u2010',
+    'Dashv;': '\u2ae4',
+    'dashv;': '\u22a3',
+    'dbkarow;': '\u290f',
+    'dblac;': '\u02dd',
+    'Dcaron;': '\u010e',
+    'dcaron;': '\u010f',
+    'Dcy;': '\u0414',
+    'dcy;': '\u0434',
+    'DD;': '\u2145',
+    'dd;': '\u2146',
+    'ddagger;': '\u2021',
+    'ddarr;': '\u21ca',
+    'DDotrahd;': '\u2911',
+    'ddotseq;': '\u2a77',
+    'deg': '\xb0',
+    'deg;': '\xb0',
+    'Del;': '\u2207',
+    'Delta;': '\u0394',
+    'delta;': '\u03b4',
+    'demptyv;': '\u29b1',
+    'dfisht;': '\u297f',
+    'Dfr;': '\U0001d507',
+    'dfr;': '\U0001d521',
+    'dHar;': '\u2965',
+    'dharl;': '\u21c3',
+    'dharr;': '\u21c2',
+    'DiacriticalAcute;': '\xb4',
+    'DiacriticalDot;': '\u02d9',
+    'DiacriticalDoubleAcute;': '\u02dd',
+    'DiacriticalGrave;': '`',
+    'DiacriticalTilde;': '\u02dc',
+    'diam;': '\u22c4',
+    'Diamond;': '\u22c4',
+    'diamond;': '\u22c4',
+    'diamondsuit;': '\u2666',
+    'diams;': '\u2666',
+    'die;': '\xa8',
+    'DifferentialD;': '\u2146',
+    'digamma;': '\u03dd',
+    'disin;': '\u22f2',
+    'div;': '\xf7',
+    'divide': '\xf7',
+    'divide;': '\xf7',
+    'divideontimes;': '\u22c7',
+    'divonx;': '\u22c7',
+    'DJcy;': '\u0402',
+    'djcy;': '\u0452',
+    'dlcorn;': '\u231e',
+    'dlcrop;': '\u230d',
+    'dollar;': '$',
+    'Dopf;': '\U0001d53b',
+    'dopf;': '\U0001d555',
+    'Dot;': '\xa8',
+    'dot;': '\u02d9',
+    'DotDot;': '\u20dc',
+    'doteq;': '\u2250',
+    'doteqdot;': '\u2251',
+    'DotEqual;': '\u2250',
+    'dotminus;': '\u2238',
+    'dotplus;': '\u2214',
+    'dotsquare;': '\u22a1',
+    'doublebarwedge;': '\u2306',
+    'DoubleContourIntegral;': '\u222f',
+    'DoubleDot;': '\xa8',
+    'DoubleDownArrow;': '\u21d3',
+    'DoubleLeftArrow;': '\u21d0',
+    'DoubleLeftRightArrow;': '\u21d4',
+    'DoubleLeftTee;': '\u2ae4',
+    'DoubleLongLeftArrow;': '\u27f8',
+    'DoubleLongLeftRightArrow;': '\u27fa',
+    'DoubleLongRightArrow;': '\u27f9',
+    'DoubleRightArrow;': '\u21d2',
+    'DoubleRightTee;': '\u22a8',
+    'DoubleUpArrow;': '\u21d1',
+    'DoubleUpDownArrow;': '\u21d5',
+    'DoubleVerticalBar;': '\u2225',
+    'DownArrow;': '\u2193',
+    'Downarrow;': '\u21d3',
+    'downarrow;': '\u2193',
+    'DownArrowBar;': '\u2913',
+    'DownArrowUpArrow;': '\u21f5',
+    'DownBreve;': '\u0311',
+    'downdownarrows;': '\u21ca',
+    'downharpoonleft;': '\u21c3',
+    'downharpoonright;': '\u21c2',
+    'DownLeftRightVector;': '\u2950',
+    'DownLeftTeeVector;': '\u295e',
+    'DownLeftVector;': '\u21bd',
+    'DownLeftVectorBar;': '\u2956',
+    'DownRightTeeVector;': '\u295f',
+    'DownRightVector;': '\u21c1',
+    'DownRightVectorBar;': '\u2957',
+    'DownTee;': '\u22a4',
+    'DownTeeArrow;': '\u21a7',
+    'drbkarow;': '\u2910',
+    'drcorn;': '\u231f',
+    'drcrop;': '\u230c',
+    'Dscr;': '\U0001d49f',
+    'dscr;': '\U0001d4b9',
+    'DScy;': '\u0405',
+    'dscy;': '\u0455',
+    'dsol;': '\u29f6',
+    'Dstrok;': '\u0110',
+    'dstrok;': '\u0111',
+    'dtdot;': '\u22f1',
+    'dtri;': '\u25bf',
+    'dtrif;': '\u25be',
+    'duarr;': '\u21f5',
+    'duhar;': '\u296f',
+    'dwangle;': '\u29a6',
+    'DZcy;': '\u040f',
+    'dzcy;': '\u045f',
+    'dzigrarr;': '\u27ff',
+    'Eacute': '\xc9',
+    'eacute': '\xe9',
+    'Eacute;': '\xc9',
+    'eacute;': '\xe9',
+    'easter;': '\u2a6e',
+    'Ecaron;': '\u011a',
+    'ecaron;': '\u011b',
+    'ecir;': '\u2256',
+    'Ecirc': '\xca',
+    'ecirc': '\xea',
+    'Ecirc;': '\xca',
+    'ecirc;': '\xea',
+    'ecolon;': '\u2255',
+    'Ecy;': '\u042d',
+    'ecy;': '\u044d',
+    'eDDot;': '\u2a77',
+    'Edot;': '\u0116',
+    'eDot;': '\u2251',
+    'edot;': '\u0117',
+    'ee;': '\u2147',
+    'efDot;': '\u2252',
+    'Efr;': '\U0001d508',
+    'efr;': '\U0001d522',
+    'eg;': '\u2a9a',
+    'Egrave': '\xc8',
+    'egrave': '\xe8',
+    'Egrave;': '\xc8',
+    'egrave;': '\xe8',
+    'egs;': '\u2a96',
+    'egsdot;': '\u2a98',
+    'el;': '\u2a99',
+    'Element;': '\u2208',
+    'elinters;': '\u23e7',
+    'ell;': '\u2113',
+    'els;': '\u2a95',
+    'elsdot;': '\u2a97',
+    'Emacr;': '\u0112',
+    'emacr;': '\u0113',
+    'empty;': '\u2205',
+    'emptyset;': '\u2205',
+    'EmptySmallSquare;': '\u25fb',
+    'emptyv;': '\u2205',
+    'EmptyVerySmallSquare;': '\u25ab',
+    'emsp13;': '\u2004',
+    'emsp14;': '\u2005',
+    'emsp;': '\u2003',
+    'ENG;': '\u014a',
+    'eng;': '\u014b',
+    'ensp;': '\u2002',
+    'Eogon;': '\u0118',
+    'eogon;': '\u0119',
+    'Eopf;': '\U0001d53c',
+    'eopf;': '\U0001d556',
+    'epar;': '\u22d5',
+    'eparsl;': '\u29e3',
+    'eplus;': '\u2a71',
+    'epsi;': '\u03b5',
+    'Epsilon;': '\u0395',
+    'epsilon;': '\u03b5',
+    'epsiv;': '\u03f5',
+    'eqcirc;': '\u2256',
+    'eqcolon;': '\u2255',
+    'eqsim;': '\u2242',
+    'eqslantgtr;': '\u2a96',
+    'eqslantless;': '\u2a95',
+    'Equal;': '\u2a75',
+    'equals;': '=',
+    'EqualTilde;': '\u2242',
+    'equest;': '\u225f',
+    'Equilibrium;': '\u21cc',
+    'equiv;': '\u2261',
+    'equivDD;': '\u2a78',
+    'eqvparsl;': '\u29e5',
+    'erarr;': '\u2971',
+    'erDot;': '\u2253',
+    'Escr;': '\u2130',
+    'escr;': '\u212f',
+    'esdot;': '\u2250',
+    'Esim;': '\u2a73',
+    'esim;': '\u2242',
+    'Eta;': '\u0397',
+    'eta;': '\u03b7',
+    'ETH': '\xd0',
+    'eth': '\xf0',
+    'ETH;': '\xd0',
+    'eth;': '\xf0',
+    'Euml': '\xcb',
+    'euml': '\xeb',
+    'Euml;': '\xcb',
+    'euml;': '\xeb',
+    'euro;': '\u20ac',
+    'excl;': '!',
+    'exist;': '\u2203',
+    'Exists;': '\u2203',
+    'expectation;': '\u2130',
+    'ExponentialE;': '\u2147',
+    'exponentiale;': '\u2147',
+    'fallingdotseq;': '\u2252',
+    'Fcy;': '\u0424',
+    'fcy;': '\u0444',
+    'female;': '\u2640',
+    'ffilig;': '\ufb03',
+    'fflig;': '\ufb00',
+    'ffllig;': '\ufb04',
+    'Ffr;': '\U0001d509',
+    'ffr;': '\U0001d523',
+    'filig;': '\ufb01',
+    'FilledSmallSquare;': '\u25fc',
+    'FilledVerySmallSquare;': '\u25aa',
+    'fjlig;': 'fj',
+    'flat;': '\u266d',
+    'fllig;': '\ufb02',
+    'fltns;': '\u25b1',
+    'fnof;': '\u0192',
+    'Fopf;': '\U0001d53d',
+    'fopf;': '\U0001d557',
+    'ForAll;': '\u2200',
+    'forall;': '\u2200',
+    'fork;': '\u22d4',
+    'forkv;': '\u2ad9',
+    'Fouriertrf;': '\u2131',
+    'fpartint;': '\u2a0d',
+    'frac12': '\xbd',
+    'frac12;': '\xbd',
+    'frac13;': '\u2153',
+    'frac14': '\xbc',
+    'frac14;': '\xbc',
+    'frac15;': '\u2155',
+    'frac16;': '\u2159',
+    'frac18;': '\u215b',
+    'frac23;': '\u2154',
+    'frac25;': '\u2156',
+    'frac34': '\xbe',
+    'frac34;': '\xbe',
+    'frac35;': '\u2157',
+    'frac38;': '\u215c',
+    'frac45;': '\u2158',
+    'frac56;': '\u215a',
+    'frac58;': '\u215d',
+    'frac78;': '\u215e',
+    'frasl;': '\u2044',
+    'frown;': '\u2322',
+    'Fscr;': '\u2131',
+    'fscr;': '\U0001d4bb',
+    'gacute;': '\u01f5',
+    'Gamma;': '\u0393',
+    'gamma;': '\u03b3',
+    'Gammad;': '\u03dc',
+    'gammad;': '\u03dd',
+    'gap;': '\u2a86',
+    'Gbreve;': '\u011e',
+    'gbreve;': '\u011f',
+    'Gcedil;': '\u0122',
+    'Gcirc;': '\u011c',
+    'gcirc;': '\u011d',
+    'Gcy;': '\u0413',
+    'gcy;': '\u0433',
+    'Gdot;': '\u0120',
+    'gdot;': '\u0121',
+    'gE;': '\u2267',
+    'ge;': '\u2265',
+    'gEl;': '\u2a8c',
+    'gel;': '\u22db',
+    'geq;': '\u2265',
+    'geqq;': '\u2267',
+    'geqslant;': '\u2a7e',
+    'ges;': '\u2a7e',
+    'gescc;': '\u2aa9',
+    'gesdot;': '\u2a80',
+    'gesdoto;': '\u2a82',
+    'gesdotol;': '\u2a84',
+    'gesl;': '\u22db\ufe00',
+    'gesles;': '\u2a94',
+    'Gfr;': '\U0001d50a',
+    'gfr;': '\U0001d524',
+    'Gg;': '\u22d9',
+    'gg;': '\u226b',
+    'ggg;': '\u22d9',
+    'gimel;': '\u2137',
+    'GJcy;': '\u0403',
+    'gjcy;': '\u0453',
+    'gl;': '\u2277',
+    'gla;': '\u2aa5',
+    'glE;': '\u2a92',
+    'glj;': '\u2aa4',
+    'gnap;': '\u2a8a',
+    'gnapprox;': '\u2a8a',
+    'gnE;': '\u2269',
+    'gne;': '\u2a88',
+    'gneq;': '\u2a88',
+    'gneqq;': '\u2269',
+    'gnsim;': '\u22e7',
+    'Gopf;': '\U0001d53e',
+    'gopf;': '\U0001d558',
+    'grave;': '`',
+    'GreaterEqual;': '\u2265',
+    'GreaterEqualLess;': '\u22db',
+    'GreaterFullEqual;': '\u2267',
+    'GreaterGreater;': '\u2aa2',
+    'GreaterLess;': '\u2277',
+    'GreaterSlantEqual;': '\u2a7e',
+    'GreaterTilde;': '\u2273',
+    'Gscr;': '\U0001d4a2',
+    'gscr;': '\u210a',
+    'gsim;': '\u2273',
+    'gsime;': '\u2a8e',
+    'gsiml;': '\u2a90',
+    'GT': '>',
+    'gt': '>',
+    'GT;': '>',
+    'Gt;': '\u226b',
+    'gt;': '>',
+    'gtcc;': '\u2aa7',
+    'gtcir;': '\u2a7a',
+    'gtdot;': '\u22d7',
+    'gtlPar;': '\u2995',
+    'gtquest;': '\u2a7c',
+    'gtrapprox;': '\u2a86',
+    'gtrarr;': '\u2978',
+    'gtrdot;': '\u22d7',
+    'gtreqless;': '\u22db',
+    'gtreqqless;': '\u2a8c',
+    'gtrless;': '\u2277',
+    'gtrsim;': '\u2273',
+    'gvertneqq;': '\u2269\ufe00',
+    'gvnE;': '\u2269\ufe00',
+    'Hacek;': '\u02c7',
+    'hairsp;': '\u200a',
+    'half;': '\xbd',
+    'hamilt;': '\u210b',
+    'HARDcy;': '\u042a',
+    'hardcy;': '\u044a',
+    'hArr;': '\u21d4',
+    'harr;': '\u2194',
+    'harrcir;': '\u2948',
+    'harrw;': '\u21ad',
+    'Hat;': '^',
+    'hbar;': '\u210f',
+    'Hcirc;': '\u0124',
+    'hcirc;': '\u0125',
+    'hearts;': '\u2665',
+    'heartsuit;': '\u2665',
+    'hellip;': '\u2026',
+    'hercon;': '\u22b9',
+    'Hfr;': '\u210c',
+    'hfr;': '\U0001d525',
+    'HilbertSpace;': '\u210b',
+    'hksearow;': '\u2925',
+    'hkswarow;': '\u2926',
+    'hoarr;': '\u21ff',
+    'homtht;': '\u223b',
+    'hookleftarrow;': '\u21a9',
+    'hookrightarrow;': '\u21aa',
+    'Hopf;': '\u210d',
+    'hopf;': '\U0001d559',
+    'horbar;': '\u2015',
+    'HorizontalLine;': '\u2500',
+    'Hscr;': '\u210b',
+    'hscr;': '\U0001d4bd',
+    'hslash;': '\u210f',
+    'Hstrok;': '\u0126',
+    'hstrok;': '\u0127',
+    'HumpDownHump;': '\u224e',
+    'HumpEqual;': '\u224f',
+    'hybull;': '\u2043',
+    'hyphen;': '\u2010',
+    'Iacute': '\xcd',
+    'iacute': '\xed',
+    'Iacute;': '\xcd',
+    'iacute;': '\xed',
+    'ic;': '\u2063',
+    'Icirc': '\xce',
+    'icirc': '\xee',
+    'Icirc;': '\xce',
+    'icirc;': '\xee',
+    'Icy;': '\u0418',
+    'icy;': '\u0438',
+    'Idot;': '\u0130',
+    'IEcy;': '\u0415',
+    'iecy;': '\u0435',
+    'iexcl': '\xa1',
+    'iexcl;': '\xa1',
+    'iff;': '\u21d4',
+    'Ifr;': '\u2111',
+    'ifr;': '\U0001d526',
+    'Igrave': '\xcc',
+    'igrave': '\xec',
+    'Igrave;': '\xcc',
+    'igrave;': '\xec',
+    'ii;': '\u2148',
+    'iiiint;': '\u2a0c',
+    'iiint;': '\u222d',
+    'iinfin;': '\u29dc',
+    'iiota;': '\u2129',
+    'IJlig;': '\u0132',
+    'ijlig;': '\u0133',
+    'Im;': '\u2111',
+    'Imacr;': '\u012a',
+    'imacr;': '\u012b',
+    'image;': '\u2111',
+    'ImaginaryI;': '\u2148',
+    'imagline;': '\u2110',
+    'imagpart;': '\u2111',
+    'imath;': '\u0131',
+    'imof;': '\u22b7',
+    'imped;': '\u01b5',
+    'Implies;': '\u21d2',
+    'in;': '\u2208',
+    'incare;': '\u2105',
+    'infin;': '\u221e',
+    'infintie;': '\u29dd',
+    'inodot;': '\u0131',
+    'Int;': '\u222c',
+    'int;': '\u222b',
+    'intcal;': '\u22ba',
+    'integers;': '\u2124',
+    'Integral;': '\u222b',
+    'intercal;': '\u22ba',
+    'Intersection;': '\u22c2',
+    'intlarhk;': '\u2a17',
+    'intprod;': '\u2a3c',
+    'InvisibleComma;': '\u2063',
+    'InvisibleTimes;': '\u2062',
+    'IOcy;': '\u0401',
+    'iocy;': '\u0451',
+    'Iogon;': '\u012e',
+    'iogon;': '\u012f',
+    'Iopf;': '\U0001d540',
+    'iopf;': '\U0001d55a',
+    'Iota;': '\u0399',
+    'iota;': '\u03b9',
+    'iprod;': '\u2a3c',
+    'iquest': '\xbf',
+    'iquest;': '\xbf',
+    'Iscr;': '\u2110',
+    'iscr;': '\U0001d4be',
+    'isin;': '\u2208',
+    'isindot;': '\u22f5',
+    'isinE;': '\u22f9',
+    'isins;': '\u22f4',
+    'isinsv;': '\u22f3',
+    'isinv;': '\u2208',
+    'it;': '\u2062',
+    'Itilde;': '\u0128',
+    'itilde;': '\u0129',
+    'Iukcy;': '\u0406',
+    'iukcy;': '\u0456',
+    'Iuml': '\xcf',
+    'iuml': '\xef',
+    'Iuml;': '\xcf',
+    'iuml;': '\xef',
+    'Jcirc;': '\u0134',
+    'jcirc;': '\u0135',
+    'Jcy;': '\u0419',
+    'jcy;': '\u0439',
+    'Jfr;': '\U0001d50d',
+    'jfr;': '\U0001d527',
+    'jmath;': '\u0237',
+    'Jopf;': '\U0001d541',
+    'jopf;': '\U0001d55b',
+    'Jscr;': '\U0001d4a5',
+    'jscr;': '\U0001d4bf',
+    'Jsercy;': '\u0408',
+    'jsercy;': '\u0458',
+    'Jukcy;': '\u0404',
+    'jukcy;': '\u0454',
+    'Kappa;': '\u039a',
+    'kappa;': '\u03ba',
+    'kappav;': '\u03f0',
+    'Kcedil;': '\u0136',
+    'kcedil;': '\u0137',
+    'Kcy;': '\u041a',
+    'kcy;': '\u043a',
+    'Kfr;': '\U0001d50e',
+    'kfr;': '\U0001d528',
+    'kgreen;': '\u0138',
+    'KHcy;': '\u0425',
+    'khcy;': '\u0445',
+    'KJcy;': '\u040c',
+    'kjcy;': '\u045c',
+    'Kopf;': '\U0001d542',
+    'kopf;': '\U0001d55c',
+    'Kscr;': '\U0001d4a6',
+    'kscr;': '\U0001d4c0',
+    'lAarr;': '\u21da',
+    'Lacute;': '\u0139',
+    'lacute;': '\u013a',
+    'laemptyv;': '\u29b4',
+    'lagran;': '\u2112',
+    'Lambda;': '\u039b',
+    'lambda;': '\u03bb',
+    'Lang;': '\u27ea',
+    'lang;': '\u27e8',
+    'langd;': '\u2991',
+    'langle;': '\u27e8',
+    'lap;': '\u2a85',
+    'Laplacetrf;': '\u2112',
+    'laquo': '\xab',
+    'laquo;': '\xab',
+    'Larr;': '\u219e',
+    'lArr;': '\u21d0',
+    'larr;': '\u2190',
+    'larrb;': '\u21e4',
+    'larrbfs;': '\u291f',
+    'larrfs;': '\u291d',
+    'larrhk;': '\u21a9',
+    'larrlp;': '\u21ab',
+    'larrpl;': '\u2939',
+    'larrsim;': '\u2973',
+    'larrtl;': '\u21a2',
+    'lat;': '\u2aab',
+    'lAtail;': '\u291b',
+    'latail;': '\u2919',
+    'late;': '\u2aad',
+    'lates;': '\u2aad\ufe00',
+    'lBarr;': '\u290e',
+    'lbarr;': '\u290c',
+    'lbbrk;': '\u2772',
+    'lbrace;': '{',
+    'lbrack;': '[',
+    'lbrke;': '\u298b',
+    'lbrksld;': '\u298f',
+    'lbrkslu;': '\u298d',
+    'Lcaron;': '\u013d',
+    'lcaron;': '\u013e',
+    'Lcedil;': '\u013b',
+    'lcedil;': '\u013c',
+    'lceil;': '\u2308',
+    'lcub;': '{',
+    'Lcy;': '\u041b',
+    'lcy;': '\u043b',
+    'ldca;': '\u2936',
+    'ldquo;': '\u201c',
+    'ldquor;': '\u201e',
+    'ldrdhar;': '\u2967',
+    'ldrushar;': '\u294b',
+    'ldsh;': '\u21b2',
+    'lE;': '\u2266',
+    'le;': '\u2264',
+    'LeftAngleBracket;': '\u27e8',
+    'LeftArrow;': '\u2190',
+    'Leftarrow;': '\u21d0',
+    'leftarrow;': '\u2190',
+    'LeftArrowBar;': '\u21e4',
+    'LeftArrowRightArrow;': '\u21c6',
+    'leftarrowtail;': '\u21a2',
+    'LeftCeiling;': '\u2308',
+    'LeftDoubleBracket;': '\u27e6',
+    'LeftDownTeeVector;': '\u2961',
+    'LeftDownVector;': '\u21c3',
+    'LeftDownVectorBar;': '\u2959',
+    'LeftFloor;': '\u230a',
+    'leftharpoondown;': '\u21bd',
+    'leftharpoonup;': '\u21bc',
+    'leftleftarrows;': '\u21c7',
+    'LeftRightArrow;': '\u2194',
+    'Leftrightarrow;': '\u21d4',
+    'leftrightarrow;': '\u2194',
+    'leftrightarrows;': '\u21c6',
+    'leftrightharpoons;': '\u21cb',
+    'leftrightsquigarrow;': '\u21ad',
+    'LeftRightVector;': '\u294e',
+    'LeftTee;': '\u22a3',
+    'LeftTeeArrow;': '\u21a4',
+    'LeftTeeVector;': '\u295a',
+    'leftthreetimes;': '\u22cb',
+    'LeftTriangle;': '\u22b2',
+    'LeftTriangleBar;': '\u29cf',
+    'LeftTriangleEqual;': '\u22b4',
+    'LeftUpDownVector;': '\u2951',
+    'LeftUpTeeVector;': '\u2960',
+    'LeftUpVector;': '\u21bf',
+    'LeftUpVectorBar;': '\u2958',
+    'LeftVector;': '\u21bc',
+    'LeftVectorBar;': '\u2952',
+    'lEg;': '\u2a8b',
+    'leg;': '\u22da',
+    'leq;': '\u2264',
+    'leqq;': '\u2266',
+    'leqslant;': '\u2a7d',
+    'les;': '\u2a7d',
+    'lescc;': '\u2aa8',
+    'lesdot;': '\u2a7f',
+    'lesdoto;': '\u2a81',
+    'lesdotor;': '\u2a83',
+    'lesg;': '\u22da\ufe00',
+    'lesges;': '\u2a93',
+    'lessapprox;': '\u2a85',
+    'lessdot;': '\u22d6',
+    'lesseqgtr;': '\u22da',
+    'lesseqqgtr;': '\u2a8b',
+    'LessEqualGreater;': '\u22da',
+    'LessFullEqual;': '\u2266',
+    'LessGreater;': '\u2276',
+    'lessgtr;': '\u2276',
+    'LessLess;': '\u2aa1',
+    'lesssim;': '\u2272',
+    'LessSlantEqual;': '\u2a7d',
+    'LessTilde;': '\u2272',
+    'lfisht;': '\u297c',
+    'lfloor;': '\u230a',
+    'Lfr;': '\U0001d50f',
+    'lfr;': '\U0001d529',
+    'lg;': '\u2276',
+    'lgE;': '\u2a91',
+    'lHar;': '\u2962',
+    'lhard;': '\u21bd',
+    'lharu;': '\u21bc',
+    'lharul;': '\u296a',
+    'lhblk;': '\u2584',
+    'LJcy;': '\u0409',
+    'ljcy;': '\u0459',
+    'Ll;': '\u22d8',
+    'll;': '\u226a',
+    'llarr;': '\u21c7',
+    'llcorner;': '\u231e',
+    'Lleftarrow;': '\u21da',
+    'llhard;': '\u296b',
+    'lltri;': '\u25fa',
+    'Lmidot;': '\u013f',
+    'lmidot;': '\u0140',
+    'lmoust;': '\u23b0',
+    'lmoustache;': '\u23b0',
+    'lnap;': '\u2a89',
+    'lnapprox;': '\u2a89',
+    'lnE;': '\u2268',
+    'lne;': '\u2a87',
+    'lneq;': '\u2a87',
+    'lneqq;': '\u2268',
+    'lnsim;': '\u22e6',
+    'loang;': '\u27ec',
+    'loarr;': '\u21fd',
+    'lobrk;': '\u27e6',
+    'LongLeftArrow;': '\u27f5',
+    'Longleftarrow;': '\u27f8',
+    'longleftarrow;': '\u27f5',
+    'LongLeftRightArrow;': '\u27f7',
+    'Longleftrightarrow;': '\u27fa',
+    'longleftrightarrow;': '\u27f7',
+    'longmapsto;': '\u27fc',
+    'LongRightArrow;': '\u27f6',
+    'Longrightarrow;': '\u27f9',
+    'longrightarrow;': '\u27f6',
+    'looparrowleft;': '\u21ab',
+    'looparrowright;': '\u21ac',
+    'lopar;': '\u2985',
+    'Lopf;': '\U0001d543',
+    'lopf;': '\U0001d55d',
+    'loplus;': '\u2a2d',
+    'lotimes;': '\u2a34',
+    'lowast;': '\u2217',
+    'lowbar;': '_',
+    'LowerLeftArrow;': '\u2199',
+    'LowerRightArrow;': '\u2198',
+    'loz;': '\u25ca',
+    'lozenge;': '\u25ca',
+    'lozf;': '\u29eb',
+    'lpar;': '(',
+    'lparlt;': '\u2993',
+    'lrarr;': '\u21c6',
+    'lrcorner;': '\u231f',
+    'lrhar;': '\u21cb',
+    'lrhard;': '\u296d',
+    'lrm;': '\u200e',
+    'lrtri;': '\u22bf',
+    'lsaquo;': '\u2039',
+    'Lscr;': '\u2112',
+    'lscr;': '\U0001d4c1',
+    'Lsh;': '\u21b0',
+    'lsh;': '\u21b0',
+    'lsim;': '\u2272',
+    'lsime;': '\u2a8d',
+    'lsimg;': '\u2a8f',
+    'lsqb;': '[',
+    'lsquo;': '\u2018',
+    'lsquor;': '\u201a',
+    'Lstrok;': '\u0141',
+    'lstrok;': '\u0142',
+    'LT': '<',
+    'lt': '<',
+    'LT;': '<',
+    'Lt;': '\u226a',
+    'lt;': '<',
+    'ltcc;': '\u2aa6',
+    'ltcir;': '\u2a79',
+    'ltdot;': '\u22d6',
+    'lthree;': '\u22cb',
+    'ltimes;': '\u22c9',
+    'ltlarr;': '\u2976',
+    'ltquest;': '\u2a7b',
+    'ltri;': '\u25c3',
+    'ltrie;': '\u22b4',
+    'ltrif;': '\u25c2',
+    'ltrPar;': '\u2996',
+    'lurdshar;': '\u294a',
+    'luruhar;': '\u2966',
+    'lvertneqq;': '\u2268\ufe00',
+    'lvnE;': '\u2268\ufe00',
+    'macr': '\xaf',
+    'macr;': '\xaf',
+    'male;': '\u2642',
+    'malt;': '\u2720',
+    'maltese;': '\u2720',
+    'Map;': '\u2905',
+    'map;': '\u21a6',
+    'mapsto;': '\u21a6',
+    'mapstodown;': '\u21a7',
+    'mapstoleft;': '\u21a4',
+    'mapstoup;': '\u21a5',
+    'marker;': '\u25ae',
+    'mcomma;': '\u2a29',
+    'Mcy;': '\u041c',
+    'mcy;': '\u043c',
+    'mdash;': '\u2014',
+    'mDDot;': '\u223a',
+    'measuredangle;': '\u2221',
+    'MediumSpace;': '\u205f',
+    'Mellintrf;': '\u2133',
+    'Mfr;': '\U0001d510',
+    'mfr;': '\U0001d52a',
+    'mho;': '\u2127',
+    'micro': '\xb5',
+    'micro;': '\xb5',
+    'mid;': '\u2223',
+    'midast;': '*',
+    'midcir;': '\u2af0',
+    'middot': '\xb7',
+    'middot;': '\xb7',
+    'minus;': '\u2212',
+    'minusb;': '\u229f',
+    'minusd;': '\u2238',
+    'minusdu;': '\u2a2a',
+    'MinusPlus;': '\u2213',
+    'mlcp;': '\u2adb',
+    'mldr;': '\u2026',
+    'mnplus;': '\u2213',
+    'models;': '\u22a7',
+    'Mopf;': '\U0001d544',
+    'mopf;': '\U0001d55e',
+    'mp;': '\u2213',
+    'Mscr;': '\u2133',
+    'mscr;': '\U0001d4c2',
+    'mstpos;': '\u223e',
+    'Mu;': '\u039c',
+    'mu;': '\u03bc',
+    'multimap;': '\u22b8',
+    'mumap;': '\u22b8',
+    'nabla;': '\u2207',
+    'Nacute;': '\u0143',
+    'nacute;': '\u0144',
+    'nang;': '\u2220\u20d2',
+    'nap;': '\u2249',
+    'napE;': '\u2a70\u0338',
+    'napid;': '\u224b\u0338',
+    'napos;': '\u0149',
+    'napprox;': '\u2249',
+    'natur;': '\u266e',
+    'natural;': '\u266e',
+    'naturals;': '\u2115',
+    'nbsp': '\xa0',
+    'nbsp;': '\xa0',
+    'nbump;': '\u224e\u0338',
+    'nbumpe;': '\u224f\u0338',
+    'ncap;': '\u2a43',
+    'Ncaron;': '\u0147',
+    'ncaron;': '\u0148',
+    'Ncedil;': '\u0145',
+    'ncedil;': '\u0146',
+    'ncong;': '\u2247',
+    'ncongdot;': '\u2a6d\u0338',
+    'ncup;': '\u2a42',
+    'Ncy;': '\u041d',
+    'ncy;': '\u043d',
+    'ndash;': '\u2013',
+    'ne;': '\u2260',
+    'nearhk;': '\u2924',
+    'neArr;': '\u21d7',
+    'nearr;': '\u2197',
+    'nearrow;': '\u2197',
+    'nedot;': '\u2250\u0338',
+    'NegativeMediumSpace;': '\u200b',
+    'NegativeThickSpace;': '\u200b',
+    'NegativeThinSpace;': '\u200b',
+    'NegativeVeryThinSpace;': '\u200b',
+    'nequiv;': '\u2262',
+    'nesear;': '\u2928',
+    'nesim;': '\u2242\u0338',
+    'NestedGreaterGreater;': '\u226b',
+    'NestedLessLess;': '\u226a',
+    'NewLine;': '\n',
+    'nexist;': '\u2204',
+    'nexists;': '\u2204',
+    'Nfr;': '\U0001d511',
+    'nfr;': '\U0001d52b',
+    'ngE;': '\u2267\u0338',
+    'nge;': '\u2271',
+    'ngeq;': '\u2271',
+    'ngeqq;': '\u2267\u0338',
+    'ngeqslant;': '\u2a7e\u0338',
+    'nges;': '\u2a7e\u0338',
+    'nGg;': '\u22d9\u0338',
+    'ngsim;': '\u2275',
+    'nGt;': '\u226b\u20d2',
+    'ngt;': '\u226f',
+    'ngtr;': '\u226f',
+    'nGtv;': '\u226b\u0338',
+    'nhArr;': '\u21ce',
+    'nharr;': '\u21ae',
+    'nhpar;': '\u2af2',
+    'ni;': '\u220b',
+    'nis;': '\u22fc',
+    'nisd;': '\u22fa',
+    'niv;': '\u220b',
+    'NJcy;': '\u040a',
+    'njcy;': '\u045a',
+    'nlArr;': '\u21cd',
+    'nlarr;': '\u219a',
+    'nldr;': '\u2025',
+    'nlE;': '\u2266\u0338',
+    'nle;': '\u2270',
+    'nLeftarrow;': '\u21cd',
+    'nleftarrow;': '\u219a',
+    'nLeftrightarrow;': '\u21ce',
+    'nleftrightarrow;': '\u21ae',
+    'nleq;': '\u2270',
+    'nleqq;': '\u2266\u0338',
+    'nleqslant;': '\u2a7d\u0338',
+    'nles;': '\u2a7d\u0338',
+    'nless;': '\u226e',
+    'nLl;': '\u22d8\u0338',
+    'nlsim;': '\u2274',
+    'nLt;': '\u226a\u20d2',
+    'nlt;': '\u226e',
+    'nltri;': '\u22ea',
+    'nltrie;': '\u22ec',
+    'nLtv;': '\u226a\u0338',
+    'nmid;': '\u2224',
+    'NoBreak;': '\u2060',
+    'NonBreakingSpace;': '\xa0',
+    'Nopf;': '\u2115',
+    'nopf;': '\U0001d55f',
+    'not': '\xac',
+    'Not;': '\u2aec',
+    'not;': '\xac',
+    'NotCongruent;': '\u2262',
+    'NotCupCap;': '\u226d',
+    'NotDoubleVerticalBar;': '\u2226',
+    'NotElement;': '\u2209',
+    'NotEqual;': '\u2260',
+    'NotEqualTilde;': '\u2242\u0338',
+    'NotExists;': '\u2204',
+    'NotGreater;': '\u226f',
+    'NotGreaterEqual;': '\u2271',
+    'NotGreaterFullEqual;': '\u2267\u0338',
+    'NotGreaterGreater;': '\u226b\u0338',
+    'NotGreaterLess;': '\u2279',
+    'NotGreaterSlantEqual;': '\u2a7e\u0338',
+    'NotGreaterTilde;': '\u2275',
+    'NotHumpDownHump;': '\u224e\u0338',
+    'NotHumpEqual;': '\u224f\u0338',
+    'notin;': '\u2209',
+    'notindot;': '\u22f5\u0338',
+    'notinE;': '\u22f9\u0338',
+    'notinva;': '\u2209',
+    'notinvb;': '\u22f7',
+    'notinvc;': '\u22f6',
+    'NotLeftTriangle;': '\u22ea',
+    'NotLeftTriangleBar;': '\u29cf\u0338',
+    'NotLeftTriangleEqual;': '\u22ec',
+    'NotLess;': '\u226e',
+    'NotLessEqual;': '\u2270',
+    'NotLessGreater;': '\u2278',
+    'NotLessLess;': '\u226a\u0338',
+    'NotLessSlantEqual;': '\u2a7d\u0338',
+    'NotLessTilde;': '\u2274',
+    'NotNestedGreaterGreater;': '\u2aa2\u0338',
+    'NotNestedLessLess;': '\u2aa1\u0338',
+    'notni;': '\u220c',
+    'notniva;': '\u220c',
+    'notnivb;': '\u22fe',
+    'notnivc;': '\u22fd',
+    'NotPrecedes;': '\u2280',
+    'NotPrecedesEqual;': '\u2aaf\u0338',
+    'NotPrecedesSlantEqual;': '\u22e0',
+    'NotReverseElement;': '\u220c',
+    'NotRightTriangle;': '\u22eb',
+    'NotRightTriangleBar;': '\u29d0\u0338',
+    'NotRightTriangleEqual;': '\u22ed',
+    'NotSquareSubset;': '\u228f\u0338',
+    'NotSquareSubsetEqual;': '\u22e2',
+    'NotSquareSuperset;': '\u2290\u0338',
+    'NotSquareSupersetEqual;': '\u22e3',
+    'NotSubset;': '\u2282\u20d2',
+    'NotSubsetEqual;': '\u2288',
+    'NotSucceeds;': '\u2281',
+    'NotSucceedsEqual;': '\u2ab0\u0338',
+    'NotSucceedsSlantEqual;': '\u22e1',
+    'NotSucceedsTilde;': '\u227f\u0338',
+    'NotSuperset;': '\u2283\u20d2',
+    'NotSupersetEqual;': '\u2289',
+    'NotTilde;': '\u2241',
+    'NotTildeEqual;': '\u2244',
+    'NotTildeFullEqual;': '\u2247',
+    'NotTildeTilde;': '\u2249',
+    'NotVerticalBar;': '\u2224',
+    'npar;': '\u2226',
+    'nparallel;': '\u2226',
+    'nparsl;': '\u2afd\u20e5',
+    'npart;': '\u2202\u0338',
+    'npolint;': '\u2a14',
+    'npr;': '\u2280',
+    'nprcue;': '\u22e0',
+    'npre;': '\u2aaf\u0338',
+    'nprec;': '\u2280',
+    'npreceq;': '\u2aaf\u0338',
+    'nrArr;': '\u21cf',
+    'nrarr;': '\u219b',
+    'nrarrc;': '\u2933\u0338',
+    'nrarrw;': '\u219d\u0338',
+    'nRightarrow;': '\u21cf',
+    'nrightarrow;': '\u219b',
+    'nrtri;': '\u22eb',
+    'nrtrie;': '\u22ed',
+    'nsc;': '\u2281',
+    'nsccue;': '\u22e1',
+    'nsce;': '\u2ab0\u0338',
+    'Nscr;': '\U0001d4a9',
+    'nscr;': '\U0001d4c3',
+    'nshortmid;': '\u2224',
+    'nshortparallel;': '\u2226',
+    'nsim;': '\u2241',
+    'nsime;': '\u2244',
+    'nsimeq;': '\u2244',
+    'nsmid;': '\u2224',
+    'nspar;': '\u2226',
+    'nsqsube;': '\u22e2',
+    'nsqsupe;': '\u22e3',
+    'nsub;': '\u2284',
+    'nsubE;': '\u2ac5\u0338',
+    'nsube;': '\u2288',
+    'nsubset;': '\u2282\u20d2',
+    'nsubseteq;': '\u2288',
+    'nsubseteqq;': '\u2ac5\u0338',
+    'nsucc;': '\u2281',
+    'nsucceq;': '\u2ab0\u0338',
+    'nsup;': '\u2285',
+    'nsupE;': '\u2ac6\u0338',
+    'nsupe;': '\u2289',
+    'nsupset;': '\u2283\u20d2',
+    'nsupseteq;': '\u2289',
+    'nsupseteqq;': '\u2ac6\u0338',
+    'ntgl;': '\u2279',
+    'Ntilde': '\xd1',
+    'ntilde': '\xf1',
+    'Ntilde;': '\xd1',
+    'ntilde;': '\xf1',
+    'ntlg;': '\u2278',
+    'ntriangleleft;': '\u22ea',
+    'ntrianglelefteq;': '\u22ec',
+    'ntriangleright;': '\u22eb',
+    'ntrianglerighteq;': '\u22ed',
+    'Nu;': '\u039d',
+    'nu;': '\u03bd',
+    'num;': '#',
+    'numero;': '\u2116',
+    'numsp;': '\u2007',
+    'nvap;': '\u224d\u20d2',
+    'nVDash;': '\u22af',
+    'nVdash;': '\u22ae',
+    'nvDash;': '\u22ad',
+    'nvdash;': '\u22ac',
+    'nvge;': '\u2265\u20d2',
+    'nvgt;': '>\u20d2',
+    'nvHarr;': '\u2904',
+    'nvinfin;': '\u29de',
+    'nvlArr;': '\u2902',
+    'nvle;': '\u2264\u20d2',
+    'nvlt;': '<\u20d2',
+    'nvltrie;': '\u22b4\u20d2',
+    'nvrArr;': '\u2903',
+    'nvrtrie;': '\u22b5\u20d2',
+    'nvsim;': '\u223c\u20d2',
+    'nwarhk;': '\u2923',
+    'nwArr;': '\u21d6',
+    'nwarr;': '\u2196',
+    'nwarrow;': '\u2196',
+    'nwnear;': '\u2927',
+    'Oacute': '\xd3',
+    'oacute': '\xf3',
+    'Oacute;': '\xd3',
+    'oacute;': '\xf3',
+    'oast;': '\u229b',
+    'ocir;': '\u229a',
+    'Ocirc': '\xd4',
+    'ocirc': '\xf4',
+    'Ocirc;': '\xd4',
+    'ocirc;': '\xf4',
+    'Ocy;': '\u041e',
+    'ocy;': '\u043e',
+    'odash;': '\u229d',
+    'Odblac;': '\u0150',
+    'odblac;': '\u0151',
+    'odiv;': '\u2a38',
+    'odot;': '\u2299',
+    'odsold;': '\u29bc',
+    'OElig;': '\u0152',
+    'oelig;': '\u0153',
+    'ofcir;': '\u29bf',
+    'Ofr;': '\U0001d512',
+    'ofr;': '\U0001d52c',
+    'ogon;': '\u02db',
+    'Ograve': '\xd2',
+    'ograve': '\xf2',
+    'Ograve;': '\xd2',
+    'ograve;': '\xf2',
+    'ogt;': '\u29c1',
+    'ohbar;': '\u29b5',
+    'ohm;': '\u03a9',
+    'oint;': '\u222e',
+    'olarr;': '\u21ba',
+    'olcir;': '\u29be',
+    'olcross;': '\u29bb',
+    'oline;': '\u203e',
+    'olt;': '\u29c0',
+    'Omacr;': '\u014c',
+    'omacr;': '\u014d',
+    'Omega;': '\u03a9',
+    'omega;': '\u03c9',
+    'Omicron;': '\u039f',
+    'omicron;': '\u03bf',
+    'omid;': '\u29b6',
+    'ominus;': '\u2296',
+    'Oopf;': '\U0001d546',
+    'oopf;': '\U0001d560',
+    'opar;': '\u29b7',
+    'OpenCurlyDoubleQuote;': '\u201c',
+    'OpenCurlyQuote;': '\u2018',
+    'operp;': '\u29b9',
+    'oplus;': '\u2295',
+    'Or;': '\u2a54',
+    'or;': '\u2228',
+    'orarr;': '\u21bb',
+    'ord;': '\u2a5d',
+    'order;': '\u2134',
+    'orderof;': '\u2134',
+    'ordf': '\xaa',
+    'ordf;': '\xaa',
+    'ordm': '\xba',
+    'ordm;': '\xba',
+    'origof;': '\u22b6',
+    'oror;': '\u2a56',
+    'orslope;': '\u2a57',
+    'orv;': '\u2a5b',
+    'oS;': '\u24c8',
+    'Oscr;': '\U0001d4aa',
+    'oscr;': '\u2134',
+    'Oslash': '\xd8',
+    'oslash': '\xf8',
+    'Oslash;': '\xd8',
+    'oslash;': '\xf8',
+    'osol;': '\u2298',
+    'Otilde': '\xd5',
+    'otilde': '\xf5',
+    'Otilde;': '\xd5',
+    'otilde;': '\xf5',
+    'Otimes;': '\u2a37',
+    'otimes;': '\u2297',
+    'otimesas;': '\u2a36',
+    'Ouml': '\xd6',
+    'ouml': '\xf6',
+    'Ouml;': '\xd6',
+    'ouml;': '\xf6',
+    'ovbar;': '\u233d',
+    'OverBar;': '\u203e',
+    'OverBrace;': '\u23de',
+    'OverBracket;': '\u23b4',
+    'OverParenthesis;': '\u23dc',
+    'par;': '\u2225',
+    'para': '\xb6',
+    'para;': '\xb6',
+    'parallel;': '\u2225',
+    'parsim;': '\u2af3',
+    'parsl;': '\u2afd',
+    'part;': '\u2202',
+    'PartialD;': '\u2202',
+    'Pcy;': '\u041f',
+    'pcy;': '\u043f',
+    'percnt;': '%',
+    'period;': '.',
+    'permil;': '\u2030',
+    'perp;': '\u22a5',
+    'pertenk;': '\u2031',
+    'Pfr;': '\U0001d513',
+    'pfr;': '\U0001d52d',
+    'Phi;': '\u03a6',
+    'phi;': '\u03c6',
+    'phiv;': '\u03d5',
+    'phmmat;': '\u2133',
+    'phone;': '\u260e',
+    'Pi;': '\u03a0',
+    'pi;': '\u03c0',
+    'pitchfork;': '\u22d4',
+    'piv;': '\u03d6',
+    'planck;': '\u210f',
+    'planckh;': '\u210e',
+    'plankv;': '\u210f',
+    'plus;': '+',
+    'plusacir;': '\u2a23',
+    'plusb;': '\u229e',
+    'pluscir;': '\u2a22',
+    'plusdo;': '\u2214',
+    'plusdu;': '\u2a25',
+    'pluse;': '\u2a72',
+    'PlusMinus;': '\xb1',
+    'plusmn': '\xb1',
+    'plusmn;': '\xb1',
+    'plussim;': '\u2a26',
+    'plustwo;': '\u2a27',
+    'pm;': '\xb1',
+    'Poincareplane;': '\u210c',
+    'pointint;': '\u2a15',
+    'Popf;': '\u2119',
+    'popf;': '\U0001d561',
+    'pound': '\xa3',
+    'pound;': '\xa3',
+    'Pr;': '\u2abb',
+    'pr;': '\u227a',
+    'prap;': '\u2ab7',
+    'prcue;': '\u227c',
+    'prE;': '\u2ab3',
+    'pre;': '\u2aaf',
+    'prec;': '\u227a',
+    'precapprox;': '\u2ab7',
+    'preccurlyeq;': '\u227c',
+    'Precedes;': '\u227a',
+    'PrecedesEqual;': '\u2aaf',
+    'PrecedesSlantEqual;': '\u227c',
+    'PrecedesTilde;': '\u227e',
+    'preceq;': '\u2aaf',
+    'precnapprox;': '\u2ab9',
+    'precneqq;': '\u2ab5',
+    'precnsim;': '\u22e8',
+    'precsim;': '\u227e',
+    'Prime;': '\u2033',
+    'prime;': '\u2032',
+    'primes;': '\u2119',
+    'prnap;': '\u2ab9',
+    'prnE;': '\u2ab5',
+    'prnsim;': '\u22e8',
+    'prod;': '\u220f',
+    'Product;': '\u220f',
+    'profalar;': '\u232e',
+    'profline;': '\u2312',
+    'profsurf;': '\u2313',
+    'prop;': '\u221d',
+    'Proportion;': '\u2237',
+    'Proportional;': '\u221d',
+    'propto;': '\u221d',
+    'prsim;': '\u227e',
+    'prurel;': '\u22b0',
+    'Pscr;': '\U0001d4ab',
+    'pscr;': '\U0001d4c5',
+    'Psi;': '\u03a8',
+    'psi;': '\u03c8',
+    'puncsp;': '\u2008',
+    'Qfr;': '\U0001d514',
+    'qfr;': '\U0001d52e',
+    'qint;': '\u2a0c',
+    'Qopf;': '\u211a',
+    'qopf;': '\U0001d562',
+    'qprime;': '\u2057',
+    'Qscr;': '\U0001d4ac',
+    'qscr;': '\U0001d4c6',
+    'quaternions;': '\u210d',
+    'quatint;': '\u2a16',
+    'quest;': '?',
+    'questeq;': '\u225f',
+    'QUOT': '"',
+    'quot': '"',
+    'QUOT;': '"',
+    'quot;': '"',
+    'rAarr;': '\u21db',
+    'race;': '\u223d\u0331',
+    'Racute;': '\u0154',
+    'racute;': '\u0155',
+    'radic;': '\u221a',
+    'raemptyv;': '\u29b3',
+    'Rang;': '\u27eb',
+    'rang;': '\u27e9',
+    'rangd;': '\u2992',
+    'range;': '\u29a5',
+    'rangle;': '\u27e9',
+    'raquo': '\xbb',
+    'raquo;': '\xbb',
+    'Rarr;': '\u21a0',
+    'rArr;': '\u21d2',
+    'rarr;': '\u2192',
+    'rarrap;': '\u2975',
+    'rarrb;': '\u21e5',
+    'rarrbfs;': '\u2920',
+    'rarrc;': '\u2933',
+    'rarrfs;': '\u291e',
+    'rarrhk;': '\u21aa',
+    'rarrlp;': '\u21ac',
+    'rarrpl;': '\u2945',
+    'rarrsim;': '\u2974',
+    'Rarrtl;': '\u2916',
+    'rarrtl;': '\u21a3',
+    'rarrw;': '\u219d',
+    'rAtail;': '\u291c',
+    'ratail;': '\u291a',
+    'ratio;': '\u2236',
+    'rationals;': '\u211a',
+    'RBarr;': '\u2910',
+    'rBarr;': '\u290f',
+    'rbarr;': '\u290d',
+    'rbbrk;': '\u2773',
+    'rbrace;': '}',
+    'rbrack;': ']',
+    'rbrke;': '\u298c',
+    'rbrksld;': '\u298e',
+    'rbrkslu;': '\u2990',
+    'Rcaron;': '\u0158',
+    'rcaron;': '\u0159',
+    'Rcedil;': '\u0156',
+    'rcedil;': '\u0157',
+    'rceil;': '\u2309',
+    'rcub;': '}',
+    'Rcy;': '\u0420',
+    'rcy;': '\u0440',
+    'rdca;': '\u2937',
+    'rdldhar;': '\u2969',
+    'rdquo;': '\u201d',
+    'rdquor;': '\u201d',
+    'rdsh;': '\u21b3',
+    'Re;': '\u211c',
+    'real;': '\u211c',
+    'realine;': '\u211b',
+    'realpart;': '\u211c',
+    'reals;': '\u211d',
+    'rect;': '\u25ad',
+    'REG': '\xae',
+    'reg': '\xae',
+    'REG;': '\xae',
+    'reg;': '\xae',
+    'ReverseElement;': '\u220b',
+    'ReverseEquilibrium;': '\u21cb',
+    'ReverseUpEquilibrium;': '\u296f',
+    'rfisht;': '\u297d',
+    'rfloor;': '\u230b',
+    'Rfr;': '\u211c',
+    'rfr;': '\U0001d52f',
+    'rHar;': '\u2964',
+    'rhard;': '\u21c1',
+    'rharu;': '\u21c0',
+    'rharul;': '\u296c',
+    'Rho;': '\u03a1',
+    'rho;': '\u03c1',
+    'rhov;': '\u03f1',
+    'RightAngleBracket;': '\u27e9',
+    'RightArrow;': '\u2192',
+    'Rightarrow;': '\u21d2',
+    'rightarrow;': '\u2192',
+    'RightArrowBar;': '\u21e5',
+    'RightArrowLeftArrow;': '\u21c4',
+    'rightarrowtail;': '\u21a3',
+    'RightCeiling;': '\u2309',
+    'RightDoubleBracket;': '\u27e7',
+    'RightDownTeeVector;': '\u295d',
+    'RightDownVector;': '\u21c2',
+    'RightDownVectorBar;': '\u2955',
+    'RightFloor;': '\u230b',
+    'rightharpoondown;': '\u21c1',
+    'rightharpoonup;': '\u21c0',
+    'rightleftarrows;': '\u21c4',
+    'rightleftharpoons;': '\u21cc',
+    'rightrightarrows;': '\u21c9',
+    'rightsquigarrow;': '\u219d',
+    'RightTee;': '\u22a2',
+    'RightTeeArrow;': '\u21a6',
+    'RightTeeVector;': '\u295b',
+    'rightthreetimes;': '\u22cc',
+    'RightTriangle;': '\u22b3',
+    'RightTriangleBar;': '\u29d0',
+    'RightTriangleEqual;': '\u22b5',
+    'RightUpDownVector;': '\u294f',
+    'RightUpTeeVector;': '\u295c',
+    'RightUpVector;': '\u21be',
+    'RightUpVectorBar;': '\u2954',
+    'RightVector;': '\u21c0',
+    'RightVectorBar;': '\u2953',
+    'ring;': '\u02da',
+    'risingdotseq;': '\u2253',
+    'rlarr;': '\u21c4',
+    'rlhar;': '\u21cc',
+    'rlm;': '\u200f',
+    'rmoust;': '\u23b1',
+    'rmoustache;': '\u23b1',
+    'rnmid;': '\u2aee',
+    'roang;': '\u27ed',
+    'roarr;': '\u21fe',
+    'robrk;': '\u27e7',
+    'ropar;': '\u2986',
+    'Ropf;': '\u211d',
+    'ropf;': '\U0001d563',
+    'roplus;': '\u2a2e',
+    'rotimes;': '\u2a35',
+    'RoundImplies;': '\u2970',
+    'rpar;': ')',
+    'rpargt;': '\u2994',
+    'rppolint;': '\u2a12',
+    'rrarr;': '\u21c9',
+    'Rrightarrow;': '\u21db',
+    'rsaquo;': '\u203a',
+    'Rscr;': '\u211b',
+    'rscr;': '\U0001d4c7',
+    'Rsh;': '\u21b1',
+    'rsh;': '\u21b1',
+    'rsqb;': ']',
+    'rsquo;': '\u2019',
+    'rsquor;': '\u2019',
+    'rthree;': '\u22cc',
+    'rtimes;': '\u22ca',
+    'rtri;': '\u25b9',
+    'rtrie;': '\u22b5',
+    'rtrif;': '\u25b8',
+    'rtriltri;': '\u29ce',
+    'RuleDelayed;': '\u29f4',
+    'ruluhar;': '\u2968',
+    'rx;': '\u211e',
+    'Sacute;': '\u015a',
+    'sacute;': '\u015b',
+    'sbquo;': '\u201a',
+    'Sc;': '\u2abc',
+    'sc;': '\u227b',
+    'scap;': '\u2ab8',
+    'Scaron;': '\u0160',
+    'scaron;': '\u0161',
+    'sccue;': '\u227d',
+    'scE;': '\u2ab4',
+    'sce;': '\u2ab0',
+    'Scedil;': '\u015e',
+    'scedil;': '\u015f',
+    'Scirc;': '\u015c',
+    'scirc;': '\u015d',
+    'scnap;': '\u2aba',
+    'scnE;': '\u2ab6',
+    'scnsim;': '\u22e9',
+    'scpolint;': '\u2a13',
+    'scsim;': '\u227f',
+    'Scy;': '\u0421',
+    'scy;': '\u0441',
+    'sdot;': '\u22c5',
+    'sdotb;': '\u22a1',
+    'sdote;': '\u2a66',
+    'searhk;': '\u2925',
+    'seArr;': '\u21d8',
+    'searr;': '\u2198',
+    'searrow;': '\u2198',
+    'sect': '\xa7',
+    'sect;': '\xa7',
+    'semi;': ';',
+    'seswar;': '\u2929',
+    'setminus;': '\u2216',
+    'setmn;': '\u2216',
+    'sext;': '\u2736',
+    'Sfr;': '\U0001d516',
+    'sfr;': '\U0001d530',
+    'sfrown;': '\u2322',
+    'sharp;': '\u266f',
+    'SHCHcy;': '\u0429',
+    'shchcy;': '\u0449',
+    'SHcy;': '\u0428',
+    'shcy;': '\u0448',
+    'ShortDownArrow;': '\u2193',
+    'ShortLeftArrow;': '\u2190',
+    'shortmid;': '\u2223',
+    'shortparallel;': '\u2225',
+    'ShortRightArrow;': '\u2192',
+    'ShortUpArrow;': '\u2191',
+    'shy': '\xad',
+    'shy;': '\xad',
+    'Sigma;': '\u03a3',
+    'sigma;': '\u03c3',
+    'sigmaf;': '\u03c2',
+    'sigmav;': '\u03c2',
+    'sim;': '\u223c',
+    'simdot;': '\u2a6a',
+    'sime;': '\u2243',
+    'simeq;': '\u2243',
+    'simg;': '\u2a9e',
+    'simgE;': '\u2aa0',
+    'siml;': '\u2a9d',
+    'simlE;': '\u2a9f',
+    'simne;': '\u2246',
+    'simplus;': '\u2a24',
+    'simrarr;': '\u2972',
+    'slarr;': '\u2190',
+    'SmallCircle;': '\u2218',
+    'smallsetminus;': '\u2216',
+    'smashp;': '\u2a33',
+    'smeparsl;': '\u29e4',
+    'smid;': '\u2223',
+    'smile;': '\u2323',
+    'smt;': '\u2aaa',
+    'smte;': '\u2aac',
+    'smtes;': '\u2aac\ufe00',
+    'SOFTcy;': '\u042c',
+    'softcy;': '\u044c',
+    'sol;': '/',
+    'solb;': '\u29c4',
+    'solbar;': '\u233f',
+    'Sopf;': '\U0001d54a',
+    'sopf;': '\U0001d564',
+    'spades;': '\u2660',
+    'spadesuit;': '\u2660',
+    'spar;': '\u2225',
+    'sqcap;': '\u2293',
+    'sqcaps;': '\u2293\ufe00',
+    'sqcup;': '\u2294',
+    'sqcups;': '\u2294\ufe00',
+    'Sqrt;': '\u221a',
+    'sqsub;': '\u228f',
+    'sqsube;': '\u2291',
+    'sqsubset;': '\u228f',
+    'sqsubseteq;': '\u2291',
+    'sqsup;': '\u2290',
+    'sqsupe;': '\u2292',
+    'sqsupset;': '\u2290',
+    'sqsupseteq;': '\u2292',
+    'squ;': '\u25a1',
+    'Square;': '\u25a1',
+    'square;': '\u25a1',
+    'SquareIntersection;': '\u2293',
+    'SquareSubset;': '\u228f',
+    'SquareSubsetEqual;': '\u2291',
+    'SquareSuperset;': '\u2290',
+    'SquareSupersetEqual;': '\u2292',
+    'SquareUnion;': '\u2294',
+    'squarf;': '\u25aa',
+    'squf;': '\u25aa',
+    'srarr;': '\u2192',
+    'Sscr;': '\U0001d4ae',
+    'sscr;': '\U0001d4c8',
+    'ssetmn;': '\u2216',
+    'ssmile;': '\u2323',
+    'sstarf;': '\u22c6',
+    'Star;': '\u22c6',
+    'star;': '\u2606',
+    'starf;': '\u2605',
+    'straightepsilon;': '\u03f5',
+    'straightphi;': '\u03d5',
+    'strns;': '\xaf',
+    'Sub;': '\u22d0',
+    'sub;': '\u2282',
+    'subdot;': '\u2abd',
+    'subE;': '\u2ac5',
+    'sube;': '\u2286',
+    'subedot;': '\u2ac3',
+    'submult;': '\u2ac1',
+    'subnE;': '\u2acb',
+    'subne;': '\u228a',
+    'subplus;': '\u2abf',
+    'subrarr;': '\u2979',
+    'Subset;': '\u22d0',
+    'subset;': '\u2282',
+    'subseteq;': '\u2286',
+    'subseteqq;': '\u2ac5',
+    'SubsetEqual;': '\u2286',
+    'subsetneq;': '\u228a',
+    'subsetneqq;': '\u2acb',
+    'subsim;': '\u2ac7',
+    'subsub;': '\u2ad5',
+    'subsup;': '\u2ad3',
+    'succ;': '\u227b',
+    'succapprox;': '\u2ab8',
+    'succcurlyeq;': '\u227d',
+    'Succeeds;': '\u227b',
+    'SucceedsEqual;': '\u2ab0',
+    'SucceedsSlantEqual;': '\u227d',
+    'SucceedsTilde;': '\u227f',
+    'succeq;': '\u2ab0',
+    'succnapprox;': '\u2aba',
+    'succneqq;': '\u2ab6',
+    'succnsim;': '\u22e9',
+    'succsim;': '\u227f',
+    'SuchThat;': '\u220b',
+    'Sum;': '\u2211',
+    'sum;': '\u2211',
+    'sung;': '\u266a',
+    'sup1': '\xb9',
+    'sup1;': '\xb9',
+    'sup2': '\xb2',
+    'sup2;': '\xb2',
+    'sup3': '\xb3',
+    'sup3;': '\xb3',
+    'Sup;': '\u22d1',
+    'sup;': '\u2283',
+    'supdot;': '\u2abe',
+    'supdsub;': '\u2ad8',
+    'supE;': '\u2ac6',
+    'supe;': '\u2287',
+    'supedot;': '\u2ac4',
+    'Superset;': '\u2283',
+    'SupersetEqual;': '\u2287',
+    'suphsol;': '\u27c9',
+    'suphsub;': '\u2ad7',
+    'suplarr;': '\u297b',
+    'supmult;': '\u2ac2',
+    'supnE;': '\u2acc',
+    'supne;': '\u228b',
+    'supplus;': '\u2ac0',
+    'Supset;': '\u22d1',
+    'supset;': '\u2283',
+    'supseteq;': '\u2287',
+    'supseteqq;': '\u2ac6',
+    'supsetneq;': '\u228b',
+    'supsetneqq;': '\u2acc',
+    'supsim;': '\u2ac8',
+    'supsub;': '\u2ad4',
+    'supsup;': '\u2ad6',
+    'swarhk;': '\u2926',
+    'swArr;': '\u21d9',
+    'swarr;': '\u2199',
+    'swarrow;': '\u2199',
+    'swnwar;': '\u292a',
+    'szlig': '\xdf',
+    'szlig;': '\xdf',
+    'Tab;': '\t',
+    'target;': '\u2316',
+    'Tau;': '\u03a4',
+    'tau;': '\u03c4',
+    'tbrk;': '\u23b4',
+    'Tcaron;': '\u0164',
+    'tcaron;': '\u0165',
+    'Tcedil;': '\u0162',
+    'tcedil;': '\u0163',
+    'Tcy;': '\u0422',
+    'tcy;': '\u0442',
+    'tdot;': '\u20db',
+    'telrec;': '\u2315',
+    'Tfr;': '\U0001d517',
+    'tfr;': '\U0001d531',
+    'there4;': '\u2234',
+    'Therefore;': '\u2234',
+    'therefore;': '\u2234',
+    'Theta;': '\u0398',
+    'theta;': '\u03b8',
+    'thetasym;': '\u03d1',
+    'thetav;': '\u03d1',
+    'thickapprox;': '\u2248',
+    'thicksim;': '\u223c',
+    'ThickSpace;': '\u205f\u200a',
+    'thinsp;': '\u2009',
+    'ThinSpace;': '\u2009',
+    'thkap;': '\u2248',
+    'thksim;': '\u223c',
+    'THORN': '\xde',
+    'thorn': '\xfe',
+    'THORN;': '\xde',
+    'thorn;': '\xfe',
+    'Tilde;': '\u223c',
+    'tilde;': '\u02dc',
+    'TildeEqual;': '\u2243',
+    'TildeFullEqual;': '\u2245',
+    'TildeTilde;': '\u2248',
+    'times': '\xd7',
+    'times;': '\xd7',
+    'timesb;': '\u22a0',
+    'timesbar;': '\u2a31',
+    'timesd;': '\u2a30',
+    'tint;': '\u222d',
+    'toea;': '\u2928',
+    'top;': '\u22a4',
+    'topbot;': '\u2336',
+    'topcir;': '\u2af1',
+    'Topf;': '\U0001d54b',
+    'topf;': '\U0001d565',
+    'topfork;': '\u2ada',
+    'tosa;': '\u2929',
+    'tprime;': '\u2034',
+    'TRADE;': '\u2122',
+    'trade;': '\u2122',
+    'triangle;': '\u25b5',
+    'triangledown;': '\u25bf',
+    'triangleleft;': '\u25c3',
+    'trianglelefteq;': '\u22b4',
+    'triangleq;': '\u225c',
+    'triangleright;': '\u25b9',
+    'trianglerighteq;': '\u22b5',
+    'tridot;': '\u25ec',
+    'trie;': '\u225c',
+    'triminus;': '\u2a3a',
+    'TripleDot;': '\u20db',
+    'triplus;': '\u2a39',
+    'trisb;': '\u29cd',
+    'tritime;': '\u2a3b',
+    'trpezium;': '\u23e2',
+    'Tscr;': '\U0001d4af',
+    'tscr;': '\U0001d4c9',
+    'TScy;': '\u0426',
+    'tscy;': '\u0446',
+    'TSHcy;': '\u040b',
+    'tshcy;': '\u045b',
+    'Tstrok;': '\u0166',
+    'tstrok;': '\u0167',
+    'twixt;': '\u226c',
+    'twoheadleftarrow;': '\u219e',
+    'twoheadrightarrow;': '\u21a0',
+    'Uacute': '\xda',
+    'uacute': '\xfa',
+    'Uacute;': '\xda',
+    'uacute;': '\xfa',
+    'Uarr;': '\u219f',
+    'uArr;': '\u21d1',
+    'uarr;': '\u2191',
+    'Uarrocir;': '\u2949',
+    'Ubrcy;': '\u040e',
+    'ubrcy;': '\u045e',
+    'Ubreve;': '\u016c',
+    'ubreve;': '\u016d',
+    'Ucirc': '\xdb',
+    'ucirc': '\xfb',
+    'Ucirc;': '\xdb',
+    'ucirc;': '\xfb',
+    'Ucy;': '\u0423',
+    'ucy;': '\u0443',
+    'udarr;': '\u21c5',
+    'Udblac;': '\u0170',
+    'udblac;': '\u0171',
+    'udhar;': '\u296e',
+    'ufisht;': '\u297e',
+    'Ufr;': '\U0001d518',
+    'ufr;': '\U0001d532',
+    'Ugrave': '\xd9',
+    'ugrave': '\xf9',
+    'Ugrave;': '\xd9',
+    'ugrave;': '\xf9',
+    'uHar;': '\u2963',
+    'uharl;': '\u21bf',
+    'uharr;': '\u21be',
+    'uhblk;': '\u2580',
+    'ulcorn;': '\u231c',
+    'ulcorner;': '\u231c',
+    'ulcrop;': '\u230f',
+    'ultri;': '\u25f8',
+    'Umacr;': '\u016a',
+    'umacr;': '\u016b',
+    'uml': '\xa8',
+    'uml;': '\xa8',
+    'UnderBar;': '_',
+    'UnderBrace;': '\u23df',
+    'UnderBracket;': '\u23b5',
+    'UnderParenthesis;': '\u23dd',
+    'Union;': '\u22c3',
+    'UnionPlus;': '\u228e',
+    'Uogon;': '\u0172',
+    'uogon;': '\u0173',
+    'Uopf;': '\U0001d54c',
+    'uopf;': '\U0001d566',
+    'UpArrow;': '\u2191',
+    'Uparrow;': '\u21d1',
+    'uparrow;': '\u2191',
+    'UpArrowBar;': '\u2912',
+    'UpArrowDownArrow;': '\u21c5',
+    'UpDownArrow;': '\u2195',
+    'Updownarrow;': '\u21d5',
+    'updownarrow;': '\u2195',
+    'UpEquilibrium;': '\u296e',
+    'upharpoonleft;': '\u21bf',
+    'upharpoonright;': '\u21be',
+    'uplus;': '\u228e',
+    'UpperLeftArrow;': '\u2196',
+    'UpperRightArrow;': '\u2197',
+    'Upsi;': '\u03d2',
+    'upsi;': '\u03c5',
+    'upsih;': '\u03d2',
+    'Upsilon;': '\u03a5',
+    'upsilon;': '\u03c5',
+    'UpTee;': '\u22a5',
+    'UpTeeArrow;': '\u21a5',
+    'upuparrows;': '\u21c8',
+    'urcorn;': '\u231d',
+    'urcorner;': '\u231d',
+    'urcrop;': '\u230e',
+    'Uring;': '\u016e',
+    'uring;': '\u016f',
+    'urtri;': '\u25f9',
+    'Uscr;': '\U0001d4b0',
+    'uscr;': '\U0001d4ca',
+    'utdot;': '\u22f0',
+    'Utilde;': '\u0168',
+    'utilde;': '\u0169',
+    'utri;': '\u25b5',
+    'utrif;': '\u25b4',
+    'uuarr;': '\u21c8',
+    'Uuml': '\xdc',
+    'uuml': '\xfc',
+    'Uuml;': '\xdc',
+    'uuml;': '\xfc',
+    'uwangle;': '\u29a7',
+    'vangrt;': '\u299c',
+    'varepsilon;': '\u03f5',
+    'varkappa;': '\u03f0',
+    'varnothing;': '\u2205',
+    'varphi;': '\u03d5',
+    'varpi;': '\u03d6',
+    'varpropto;': '\u221d',
+    'vArr;': '\u21d5',
+    'varr;': '\u2195',
+    'varrho;': '\u03f1',
+    'varsigma;': '\u03c2',
+    'varsubsetneq;': '\u228a\ufe00',
+    'varsubsetneqq;': '\u2acb\ufe00',
+    'varsupsetneq;': '\u228b\ufe00',
+    'varsupsetneqq;': '\u2acc\ufe00',
+    'vartheta;': '\u03d1',
+    'vartriangleleft;': '\u22b2',
+    'vartriangleright;': '\u22b3',
+    'Vbar;': '\u2aeb',
+    'vBar;': '\u2ae8',
+    'vBarv;': '\u2ae9',
+    'Vcy;': '\u0412',
+    'vcy;': '\u0432',
+    'VDash;': '\u22ab',
+    'Vdash;': '\u22a9',
+    'vDash;': '\u22a8',
+    'vdash;': '\u22a2',
+    'Vdashl;': '\u2ae6',
+    'Vee;': '\u22c1',
+    'vee;': '\u2228',
+    'veebar;': '\u22bb',
+    'veeeq;': '\u225a',
+    'vellip;': '\u22ee',
+    'Verbar;': '\u2016',
+    'verbar;': '|',
+    'Vert;': '\u2016',
+    'vert;': '|',
+    'VerticalBar;': '\u2223',
+    'VerticalLine;': '|',
+    'VerticalSeparator;': '\u2758',
+    'VerticalTilde;': '\u2240',
+    'VeryThinSpace;': '\u200a',
+    'Vfr;': '\U0001d519',
+    'vfr;': '\U0001d533',
+    'vltri;': '\u22b2',
+    'vnsub;': '\u2282\u20d2',
+    'vnsup;': '\u2283\u20d2',
+    'Vopf;': '\U0001d54d',
+    'vopf;': '\U0001d567',
+    'vprop;': '\u221d',
+    'vrtri;': '\u22b3',
+    'Vscr;': '\U0001d4b1',
+    'vscr;': '\U0001d4cb',
+    'vsubnE;': '\u2acb\ufe00',
+    'vsubne;': '\u228a\ufe00',
+    'vsupnE;': '\u2acc\ufe00',
+    'vsupne;': '\u228b\ufe00',
+    'Vvdash;': '\u22aa',
+    'vzigzag;': '\u299a',
+    'Wcirc;': '\u0174',
+    'wcirc;': '\u0175',
+    'wedbar;': '\u2a5f',
+    'Wedge;': '\u22c0',
+    'wedge;': '\u2227',
+    'wedgeq;': '\u2259',
+    'weierp;': '\u2118',
+    'Wfr;': '\U0001d51a',
+    'wfr;': '\U0001d534',
+    'Wopf;': '\U0001d54e',
+    'wopf;': '\U0001d568',
+    'wp;': '\u2118',
+    'wr;': '\u2240',
+    'wreath;': '\u2240',
+    'Wscr;': '\U0001d4b2',
+    'wscr;': '\U0001d4cc',
+    'xcap;': '\u22c2',
+    'xcirc;': '\u25ef',
+    'xcup;': '\u22c3',
+    'xdtri;': '\u25bd',
+    'Xfr;': '\U0001d51b',
+    'xfr;': '\U0001d535',
+    'xhArr;': '\u27fa',
+    'xharr;': '\u27f7',
+    'Xi;': '\u039e',
+    'xi;': '\u03be',
+    'xlArr;': '\u27f8',
+    'xlarr;': '\u27f5',
+    'xmap;': '\u27fc',
+    'xnis;': '\u22fb',
+    'xodot;': '\u2a00',
+    'Xopf;': '\U0001d54f',
+    'xopf;': '\U0001d569',
+    'xoplus;': '\u2a01',
+    'xotime;': '\u2a02',
+    'xrArr;': '\u27f9',
+    'xrarr;': '\u27f6',
+    'Xscr;': '\U0001d4b3',
+    'xscr;': '\U0001d4cd',
+    'xsqcup;': '\u2a06',
+    'xuplus;': '\u2a04',
+    'xutri;': '\u25b3',
+    'xvee;': '\u22c1',
+    'xwedge;': '\u22c0',
+    'Yacute': '\xdd',
+    'yacute': '\xfd',
+    'Yacute;': '\xdd',
+    'yacute;': '\xfd',
+    'YAcy;': '\u042f',
+    'yacy;': '\u044f',
+    'Ycirc;': '\u0176',
+    'ycirc;': '\u0177',
+    'Ycy;': '\u042b',
+    'ycy;': '\u044b',
+    'yen': '\xa5',
+    'yen;': '\xa5',
+    'Yfr;': '\U0001d51c',
+    'yfr;': '\U0001d536',
+    'YIcy;': '\u0407',
+    'yicy;': '\u0457',
+    'Yopf;': '\U0001d550',
+    'yopf;': '\U0001d56a',
+    'Yscr;': '\U0001d4b4',
+    'yscr;': '\U0001d4ce',
+    'YUcy;': '\u042e',
+    'yucy;': '\u044e',
+    'yuml': '\xff',
+    'Yuml;': '\u0178',
+    'yuml;': '\xff',
+    'Zacute;': '\u0179',
+    'zacute;': '\u017a',
+    'Zcaron;': '\u017d',
+    'zcaron;': '\u017e',
+    'Zcy;': '\u0417',
+    'zcy;': '\u0437',
+    'Zdot;': '\u017b',
+    'zdot;': '\u017c',
+    'zeetrf;': '\u2128',
+    'ZeroWidthSpace;': '\u200b',
+    'Zeta;': '\u0396',
+    'zeta;': '\u03b6',
+    'Zfr;': '\u2128',
+    'zfr;': '\U0001d537',
+    'ZHcy;': '\u0416',
+    'zhcy;': '\u0436',
+    'zigrarr;': '\u21dd',
+    'Zopf;': '\u2124',
+    'zopf;': '\U0001d56b',
+    'Zscr;': '\U0001d4b5',
+    'zscr;': '\U0001d4cf',
+    'zwj;': '\u200d',
+    'zwnj;': '\u200c',
+}
+
+# maps the Unicode code point to the HTML entity name
+codepoint2name = {}
+
+# maps the HTML entity name to the character
+# (or a character reference if the character is outside the Latin-1 range)
+entitydefs = {}
+
+for (name, codepoint) in name2codepoint.items():
+    codepoint2name[codepoint] = name
+    entitydefs[name] = chr(codepoint)
+
+del name, codepoint
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/parser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..80fb8c3f929f6b62e0f665a6a781949755398e64
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/html/parser.py
@@ -0,0 +1,553 @@
+"""A parser for HTML and XHTML."""
+
+# This file is based on sgmllib.py, but the API is slightly different.
+
+# XXX There should be a way to distinguish between PCDATA (parsed
+# character data -- the normal case), RCDATA (replaceable character
+# data -- only char and entity references and end tags are special)
+# and CDATA (character data -- only end tags are special).
+
+
+import re
+import _markupbase
+
+from html import unescape
+from html.entities import html5 as html5_entities
+
+
+__all__ = ['HTMLParser']
+
+# Regular expressions used for parsing
+
+interesting_normal = re.compile('[&<]')
+incomplete = re.compile('&[a-zA-Z#]')
+
+entityref = re.compile('&([a-zA-Z][-.a-zA-Z0-9]*)[^a-zA-Z0-9]')
+charref = re.compile('&#(?:[0-9]+|[xX][0-9a-fA-F]+)[^0-9a-fA-F]')
+incomplete_charref = re.compile('&#(?:[0-9]|[xX][0-9a-fA-F])')
+attr_charref = re.compile(r'&(#[0-9]+|#[xX][0-9a-fA-F]+|[a-zA-Z][a-zA-Z0-9]*)[;=]?')
+
+starttagopen = re.compile('<[a-zA-Z]')
+endtagopen = re.compile('</[a-zA-Z]')
+piclose = re.compile('>')
+commentclose = re.compile(r'--!?>')
+commentabruptclose = re.compile(r'-?>')
+# Note:
+#  1) if you change tagfind/attrfind remember to update locatetagend too;
+#  2) if you change tagfind/attrfind and/or locatetagend the parser will
+#     explode, so don't do it.
+# see the HTML5 specs section "13.2.5.6 Tag open state",
+# "13.2.5.8 Tag name state" and "13.2.5.33 Attribute name state".
+# https://html.spec.whatwg.org/multipage/parsing.html#tag-open-state
+# https://html.spec.whatwg.org/multipage/parsing.html#tag-name-state
+# https://html.spec.whatwg.org/multipage/parsing.html#attribute-name-state
+tagfind_tolerant = re.compile(r'([a-zA-Z][^\t\n\r\f />]*)(?:[\t\n\r\f ]|/(?!>))*')
+attrfind_tolerant = re.compile(r"""
+  (
+    (?<=['"\t\n\r\f /])[^\t\n\r\f />][^\t\n\r\f /=>]*  # attribute name
+   )
+  ([\t\n\r\f ]*=[\t\n\r\f ]*        # value indicator
+    ('[^']*'                        # LITA-enclosed value
+    |"[^"]*"                        # LIT-enclosed value
+    |(?!['"])[^>\t\n\r\f ]*         # bare value
+    )
+   )?
+  (?:[\t\n\r\f ]|/(?!>))*           # possibly followed by a space
+""", re.VERBOSE)
+locatetagend = re.compile(r"""
+  [a-zA-Z][^\t\n\r\f />]*           # tag name
+  [\t\n\r\f /]*                     # optional whitespace before attribute name
+  (?:(?<=['"\t\n\r\f /])[^\t\n\r\f />][^\t\n\r\f /=>]*  # attribute name
+    (?:[\t\n\r\f ]*=[\t\n\r\f ]*    # value indicator
+      (?:'[^']*'                    # LITA-enclosed value
+        |"[^"]*"                    # LIT-enclosed value
+        |(?!['"])[^>\t\n\r\f ]*     # bare value
+       )
+     )?
+    [\t\n\r\f /]*                   # possibly followed by a space
+   )*
+   >?
+""", re.VERBOSE)
+# The following variables are not used, but are temporarily left for
+# backward compatibility.
+locatestarttagend_tolerant = re.compile(r"""
+  <[a-zA-Z][^\t\n\r\f />\x00]*       # tag name
+  (?:[\s/]*                          # optional whitespace before attribute name
+    (?:(?<=['"\s/])[^\s/>][^\s/=>]*  # attribute name
+      (?:\s*=+\s*                    # value indicator
+        (?:'[^']*'                   # LITA-enclosed value
+          |"[^"]*"                   # LIT-enclosed value
+          |(?!['"])[^>\s]*           # bare value
+         )
+        \s*                          # possibly followed by a space
+       )?(?:\s|/(?!>))*
+     )*
+   )?
+  \s*                                # trailing whitespace
+""", re.VERBOSE)
+endendtag = re.compile('>')
+endtagfind = re.compile(r'</\s*([a-zA-Z][-.a-zA-Z0-9:_]*)\s*>')
+
+# Character reference processing logic specific to attribute values
+# See: https://html.spec.whatwg.org/multipage/parsing.html#named-character-reference-state
+def _replace_attr_charref(match):
+    ref = match.group(0)
+    # Numeric / hex char refs must always be unescaped
+    if ref.startswith('&#'):
+        return unescape(ref)
+    # Named character / entity references must only be unescaped
+    # if they are an exact match, and they are not followed by an equals sign
+    if not ref.endswith('=') and ref[1:] in html5_entities:
+        return unescape(ref)
+    # Otherwise do not unescape
+    return ref
+
+def _unescape_attrvalue(s):
+    return attr_charref.sub(_replace_attr_charref, s)
+
+
+class HTMLParser(_markupbase.ParserBase):
+    """Find tags and other markup and call handler functions.
+
+    Usage:
+        p = HTMLParser()
+        p.feed(data)
+        ...
+        p.close()
+
+    Start tags are handled by calling self.handle_starttag() or
+    self.handle_startendtag(); end tags by self.handle_endtag().  The
+    data between tags is passed from the parser to the derived class
+    by calling self.handle_data() with the data as argument (the data
+    may be split up in arbitrary chunks).  If convert_charrefs is
+    True the character references are converted automatically to the
+    corresponding Unicode character (and self.handle_data() is no
+    longer split in chunks), otherwise they are passed by calling
+    self.handle_entityref() or self.handle_charref() with the string
+    containing respectively the named or numeric reference as the
+    argument.
+    """
+
+    # See the HTML5 specs section "13.4 Parsing HTML fragments".
+    # https://html.spec.whatwg.org/multipage/parsing.html#parsing-html-fragments
+    # CDATA_CONTENT_ELEMENTS are parsed in RAWTEXT mode
+    CDATA_CONTENT_ELEMENTS = ("script", "style", "xmp", "iframe", "noembed", "noframes")
+    RCDATA_CONTENT_ELEMENTS = ("textarea", "title")
+
+    def __init__(self, *, convert_charrefs=True, scripting=False):
+        """Initialize and reset this instance.
+
+        If convert_charrefs is true (the default), all character references
+        are automatically converted to the corresponding Unicode characters.
+
+        If *scripting* is false (the default), the content of the
+        ``noscript`` element is parsed normally; if it's true,
+        it's returned as is without being parsed.
+        """
+        super().__init__()
+        self.convert_charrefs = convert_charrefs
+        self.scripting = scripting
+        self.reset()
+
+    def reset(self):
+        """Reset this instance.  Loses all unprocessed data."""
+        self.rawdata = ''
+        self.lasttag = '???'
+        self.interesting = interesting_normal
+        self.cdata_elem = None
+        self._support_cdata = True
+        self._escapable = True
+        super().reset()
+
+    def feed(self, data):
+        r"""Feed data to the parser.
+
+        Call this as often as you want, with as little or as much text
+        as you want (may include '\n').
+        """
+        self.rawdata = self.rawdata + data
+        self.goahead(0)
+
+    def close(self):
+        """Handle any buffered data."""
+        self.goahead(1)
+
+    __starttag_text = None
+
+    def get_starttag_text(self):
+        """Return full source of start tag: '<...>'."""
+        return self.__starttag_text
+
+    def set_cdata_mode(self, elem, *, escapable=False):
+        self.cdata_elem = elem.lower()
+        self._escapable = escapable
+        if self.cdata_elem == 'plaintext':
+            self.interesting = re.compile(r'\z')
+        elif escapable and not self.convert_charrefs:
+            self.interesting = re.compile(r'&|</%s(?=[\t\n\r\f />])' % self.cdata_elem,
+                                          re.IGNORECASE|re.ASCII)
+        else:
+            self.interesting = re.compile(r'</%s(?=[\t\n\r\f />])' % self.cdata_elem,
+                                          re.IGNORECASE|re.ASCII)
+
+    def clear_cdata_mode(self):
+        self.interesting = interesting_normal
+        self.cdata_elem = None
+        self._escapable = True
+
+    def _set_support_cdata(self, flag=True):
+        """Enable or disable support of the CDATA sections.
+        If enabled, "<[CDATA[" starts a CDATA section which ends with "]]>".
+        If disabled, "<[CDATA[" starts a bogus comments which ends with ">".
+
+        This method is not called by default. Its purpose is to be called
+        in custom handle_starttag() and handle_endtag() methods, with
+        value that depends on the adjusted current node.
+        See https://html.spec.whatwg.org/multipage/parsing.html#markup-declaration-open-state
+        for details.
+        """
+        self._support_cdata = flag
+
+    # Internal -- handle data as far as reasonable.  May leave state
+    # and data to be processed by a subsequent call.  If 'end' is
+    # true, force handling all data as if followed by EOF marker.
+    def goahead(self, end):
+        rawdata = self.rawdata
+        i = 0
+        n = len(rawdata)
+        while i < n:
+            if self.convert_charrefs and not self.cdata_elem:
+                j = rawdata.find('<', i)
+                if j < 0:
+                    # if we can't find the next <, either we are at the end
+                    # or there's more text incoming.  If the latter is True,
+                    # we can't pass the text to handle_data in case we have
+                    # a charref cut in half at end.  Try to determine if
+                    # this is the case before proceeding by looking for an
+                    # & near the end and see if it's followed by a space or ;.
+                    amppos = rawdata.rfind('&', max(i, n-34))
+                    if (amppos >= 0 and
+                        not re.compile(r'[\t\n\r\f ;]').search(rawdata, amppos)):
+                        break  # wait till we get all the text
+                    j = n
+            else:
+                match = self.interesting.search(rawdata, i)  # < or &
+                if match:
+                    j = match.start()
+                else:
+                    if self.cdata_elem:
+                        break
+                    j = n
+            if i < j:
+                if self.convert_charrefs and self._escapable:
+                    self.handle_data(unescape(rawdata[i:j]))
+                else:
+                    self.handle_data(rawdata[i:j])
+            i = self.updatepos(i, j)
+            if i == n: break
+            startswith = rawdata.startswith
+            if startswith('<', i):
+                if starttagopen.match(rawdata, i): # < + letter
+                    k = self.parse_starttag(i)
+                elif startswith("</", i):
+                    k = self.parse_endtag(i)
+                elif startswith("<!--", i):
+                    k = self.parse_comment(i)
+                elif startswith("<?", i):
+                    k = self.parse_pi(i)
+                elif startswith("<!", i):
+                    k = self.parse_html_declaration(i)
+                elif (i + 1) < n or end:
+                    self.handle_data("<")
+                    k = i + 1
+                else:
+                    break
+                if k < 0:
+                    if not end:
+                        break
+                    if starttagopen.match(rawdata, i):  # < + letter
+                        pass
+                    elif startswith("</", i):
+                        if i + 2 == n:
+                            self.handle_data("</")
+                        elif endtagopen.match(rawdata, i):  # </ + letter
+                            pass
+                        else:
+                            # bogus comment
+                            self.handle_comment(rawdata[i+2:])
+                    elif startswith("<!--", i):
+                        j = n
+                        for suffix in ("--!", "--", "-"):
+                            if rawdata.endswith(suffix, i+4):
+                                j -= len(suffix)
+                                break
+                        self.handle_comment(rawdata[i+4:j])
+                    elif startswith("<![CDATA[", i) and self._support_cdata:
+                        self.unknown_decl(rawdata[i+3:])
+                    elif rawdata[i:i+9].lower() == '<!doctype':
+                        self.handle_decl(rawdata[i+2:])
+                    elif startswith("<!", i):
+                        # bogus comment
+                        self.handle_comment(rawdata[i+2:])
+                    elif startswith("<?", i):
+                        self.handle_pi(rawdata[i+2:])
+                    else:
+                        raise AssertionError("we should not get here!")
+                    k = n
+                i = self.updatepos(i, k)
+            elif startswith("&#", i):
+                match = charref.match(rawdata, i)
+                if match:
+                    name = match.group()[2:-1]
+                    self.handle_charref(name)
+                    k = match.end()
+                    if not startswith(';', k-1):
+                        k = k - 1
+                    i = self.updatepos(i, k)
+                    continue
+                match = incomplete_charref.match(rawdata, i)
+                if match:
+                    if end:
+                        self.handle_charref(rawdata[i+2:])
+                        i = self.updatepos(i, n)
+                        break
+                    # incomplete
+                    break
+                elif i + 3 < n:  # larger than "&#x"
+                    # not the end of the buffer, and can't be confused
+                    # with some other construct
+                    self.handle_data("&#")
+                    i = self.updatepos(i, i + 2)
+                else:
+                    break
+            elif startswith('&', i):
+                match = entityref.match(rawdata, i)
+                if match:
+                    name = match.group(1)
+                    self.handle_entityref(name)
+                    k = match.end()
+                    if not startswith(';', k-1):
+                        k = k - 1
+                    i = self.updatepos(i, k)
+                    continue
+                match = incomplete.match(rawdata, i)
+                if match:
+                    if end:
+                        self.handle_entityref(rawdata[i+1:])
+                        i = self.updatepos(i, n)
+                        break
+                    # incomplete
+                    break
+                elif i + 1 < n:
+                    # not the end of the buffer, and can't be confused
+                    # with some other construct
+                    self.handle_data("&")
+                    i = self.updatepos(i, i + 1)
+                else:
+                    break
+            else:
+                assert 0, "interesting.search() lied"
+        # end while
+        if end and i < n:
+            if self.convert_charrefs and self._escapable:
+                self.handle_data(unescape(rawdata[i:n]))
+            else:
+                self.handle_data(rawdata[i:n])
+            i = self.updatepos(i, n)
+        self.rawdata = rawdata[i:]
+
+    # Internal -- parse html declarations, return length or -1 if not terminated
+    # See w3.org/TR/html5/tokenization.html#markup-declaration-open-state
+    # See also parse_declaration in _markupbase
+    def parse_html_declaration(self, i):
+        rawdata = self.rawdata
+        assert rawdata[i:i+2] == '<!', ('unexpected call to '
+                                        'parse_html_declaration()')
+        if rawdata[i:i+4] == '<!--':
+            # this case is actually already handled in goahead()
+            return self.parse_comment(i)
+        elif rawdata[i:i+9] == '<![CDATA[' and self._support_cdata:
+            j = rawdata.find(']]>', i+9)
+            if j < 0:
+                return -1
+            self.unknown_decl(rawdata[i+3: j])
+            return j + 3
+        elif rawdata[i:i+9].lower() == '<!doctype':
+            # find the closing >
+            gtpos = rawdata.find('>', i+9)
+            if gtpos == -1:
+                return -1
+            self.handle_decl(rawdata[i+2:gtpos])
+            return gtpos+1
+        else:
+            return self.parse_bogus_comment(i)
+
+    # Internal -- parse comment, return length or -1 if not terminated
+    # see https://html.spec.whatwg.org/multipage/parsing.html#comment-start-state
+    def parse_comment(self, i, report=True):
+        rawdata = self.rawdata
+        assert rawdata.startswith('<!--', i), 'unexpected call to parse_comment()'
+        match = commentclose.search(rawdata, i+4)
+        if not match:
+            match = commentabruptclose.match(rawdata, i+4)
+            if not match:
+                return -1
+        if report:
+            j = match.start()
+            self.handle_comment(rawdata[i+4: j])
+        return match.end()
+
+    # Internal -- parse bogus comment, return length or -1 if not terminated
+    # see https://html.spec.whatwg.org/multipage/parsing.html#bogus-comment-state
+    def parse_bogus_comment(self, i, report=1):
+        rawdata = self.rawdata
+        assert rawdata[i:i+2] in ('<!', '</'), ('unexpected call to '
+                                                'parse_bogus_comment()')
+        pos = rawdata.find('>', i+2)
+        if pos == -1:
+            return -1
+        if report:
+            self.handle_comment(rawdata[i+2:pos])
+        return pos + 1
+
+    # Internal -- parse processing instr, return end or -1 if not terminated
+    def parse_pi(self, i):
+        rawdata = self.rawdata
+        assert rawdata[i:i+2] == '<?', 'unexpected call to parse_pi()'
+        match = piclose.search(rawdata, i+2) # >
+        if not match:
+            return -1
+        j = match.start()
+        self.handle_pi(rawdata[i+2: j])
+        j = match.end()
+        return j
+
+    # Internal -- handle starttag, return end or -1 if not terminated
+    def parse_starttag(self, i):
+        # See the HTML5 specs section "13.2.5.8 Tag name state"
+        # https://html.spec.whatwg.org/multipage/parsing.html#tag-name-state
+        self.__starttag_text = None
+        endpos = self.check_for_whole_start_tag(i)
+        if endpos < 0:
+            return endpos
+        rawdata = self.rawdata
+        self.__starttag_text = rawdata[i:endpos]
+
+        # Now parse the data between i+1 and j into a tag and attrs
+        attrs = []
+        match = tagfind_tolerant.match(rawdata, i+1)
+        assert match, 'unexpected call to parse_starttag()'
+        k = match.end()
+        self.lasttag = tag = match.group(1).lower()
+        while k < endpos:
+            m = attrfind_tolerant.match(rawdata, k)
+            if not m:
+                break
+            attrname, rest, attrvalue = m.group(1, 2, 3)
+            if not rest:
+                attrvalue = None
+            elif attrvalue[:1] == '\'' == attrvalue[-1:] or \
+                 attrvalue[:1] == '"' == attrvalue[-1:]:
+                attrvalue = attrvalue[1:-1]
+            if attrvalue:
+                attrvalue = _unescape_attrvalue(attrvalue)
+            attrs.append((attrname.lower(), attrvalue))
+            k = m.end()
+
+        end = rawdata[k:endpos].strip()
+        if end not in (">", "/>"):
+            self.handle_data(rawdata[i:endpos])
+            return endpos
+        if end.endswith('/>'):
+            # XHTML-style empty tag: <span attr="value" />
+            self.handle_startendtag(tag, attrs)
+        else:
+            self.handle_starttag(tag, attrs)
+            if (tag in self.CDATA_CONTENT_ELEMENTS or
+                (self.scripting and tag == "noscript") or
+                tag == "plaintext"):
+                self.set_cdata_mode(tag, escapable=False)
+            elif tag in self.RCDATA_CONTENT_ELEMENTS:
+                self.set_cdata_mode(tag, escapable=True)
+        return endpos
+
+    # Internal -- check to see if we have a complete starttag; return end
+    # or -1 if incomplete.
+    def check_for_whole_start_tag(self, i):
+        rawdata = self.rawdata
+        match = locatetagend.match(rawdata, i+1)
+        assert match
+        j = match.end()
+        if rawdata[j-1] != ">":
+            return -1
+        return j
+
+    # Internal -- parse endtag, return end or -1 if incomplete
+    def parse_endtag(self, i):
+        # See the HTML5 specs section "13.2.5.7 End tag open state"
+        # https://html.spec.whatwg.org/multipage/parsing.html#end-tag-open-state
+        rawdata = self.rawdata
+        assert rawdata[i:i+2] == "</", "unexpected call to parse_endtag"
+        if rawdata.find('>', i+2) < 0:  # fast check
+            return -1
+        if not endtagopen.match(rawdata, i):  # </ + letter
+            if rawdata[i+2:i+3] == '>':  # </> is ignored
+                # "missing-end-tag-name" parser error
+                return i+3
+            else:
+                return self.parse_bogus_comment(i)
+
+        match = locatetagend.match(rawdata, i+2)
+        assert match
+        j = match.end()
+        if rawdata[j-1] != ">":
+            return -1
+
+        # find the name: "13.2.5.8 Tag name state"
+        # https://html.spec.whatwg.org/multipage/parsing.html#tag-name-state
+        match = tagfind_tolerant.match(rawdata, i+2)
+        assert match
+        tag = match.group(1).lower()
+        self.handle_endtag(tag)
+        self.clear_cdata_mode()
+        return j
+
+    # Overridable -- finish processing of start+end tag: <tag.../>
+    def handle_startendtag(self, tag, attrs):
+        self.handle_starttag(tag, attrs)
+        self.handle_endtag(tag)
+
+    # Overridable -- handle start tag
+    def handle_starttag(self, tag, attrs):
+        pass
+
+    # Overridable -- handle end tag
+    def handle_endtag(self, tag):
+        pass
+
+    # Overridable -- handle character reference
+    def handle_charref(self, name):
+        pass
+
+    # Overridable -- handle entity reference
+    def handle_entityref(self, name):
+        pass
+
+    # Overridable -- handle data
+    def handle_data(self, data):
+        pass
+
+    # Overridable -- handle comment
+    def handle_comment(self, data):
+        pass
+
+    # Overridable -- handle declaration
+    def handle_decl(self, decl):
+        pass
+
+    # Overridable -- handle processing instruction
+    def handle_pi(self, data):
+        pass
+
+    def unknown_decl(self, data):
+        pass
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..691b4a9a367bd0fb432b7aafa7c57b348509ae00
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/__init__.py
@@ -0,0 +1,213 @@
+from enum import StrEnum, IntEnum, _simple_enum
+
+__all__ = ['HTTPStatus', 'HTTPMethod']
+
+
+@_simple_enum(IntEnum)
+class HTTPStatus:
+    """HTTP status codes and reason phrases
+
+    Status codes from the following RFCs are all observed:
+
+        * RFC 9110: HTTP Semantics, obsoletes 7231, which obsoleted 2616
+        * RFC 6585: Additional HTTP Status Codes
+        * RFC 3229: Delta encoding in HTTP
+        * RFC 4918: HTTP Extensions for WebDAV, obsoletes 2518
+        * RFC 5842: Binding Extensions to WebDAV
+        * RFC 7238: Permanent Redirect
+        * RFC 2295: Transparent Content Negotiation in HTTP
+        * RFC 2774: An HTTP Extension Framework
+        * RFC 7725: An HTTP Status Code to Report Legal Obstacles
+        * RFC 7540: Hypertext Transfer Protocol Version 2 (HTTP/2)
+        * RFC 2324: Hyper Text Coffee Pot Control Protocol (HTCPCP/1.0)
+        * RFC 8297: An HTTP Status Code for Indicating Hints
+        * RFC 8470: Using Early Data in HTTP
+    """
+    def __new__(cls, value, phrase, description=''):
+        obj = int.__new__(cls, value)
+        obj._value_ = value
+        obj.phrase = phrase
+        obj.description = description
+        return obj
+
+    @property
+    def is_informational(self):
+        return 100 <= self <= 199
+
+    @property
+    def is_success(self):
+        return 200 <= self <= 299
+
+    @property
+    def is_redirection(self):
+        return 300 <= self <= 399
+
+    @property
+    def is_client_error(self):
+        return 400 <= self <= 499
+
+    @property
+    def is_server_error(self):
+        return 500 <= self <= 599
+
+    # informational
+    CONTINUE = 100, 'Continue', 'Request received, please continue'
+    SWITCHING_PROTOCOLS = (101, 'Switching Protocols',
+            'Switching to new protocol; obey Upgrade header')
+    PROCESSING = 102, 'Processing', 'Server is processing the request'
+    EARLY_HINTS = (103, 'Early Hints',
+            'Headers sent to prepare for the response')
+
+    # success
+    OK = 200, 'OK', 'Request fulfilled, document follows'
+    CREATED = 201, 'Created', 'Document created, URL follows'
+    ACCEPTED = (202, 'Accepted',
+        'Request accepted, processing continues off-line')
+    NON_AUTHORITATIVE_INFORMATION = (203,
+        'Non-Authoritative Information', 'Request fulfilled from cache')
+    NO_CONTENT = 204, 'No Content', 'Request fulfilled, nothing follows'
+    RESET_CONTENT = 205, 'Reset Content', 'Clear input form for further input'
+    PARTIAL_CONTENT = 206, 'Partial Content', 'Partial content follows'
+    MULTI_STATUS = (207, 'Multi-Status',
+        'Response contains multiple statuses in the body')
+    ALREADY_REPORTED = (208, 'Already Reported',
+        'Operation has already been reported')
+    IM_USED = 226, 'IM Used', 'Request completed using instance manipulations'
+
+    # redirection
+    MULTIPLE_CHOICES = (300, 'Multiple Choices',
+        'Object has several resources -- see URI list')
+    MOVED_PERMANENTLY = (301, 'Moved Permanently',
+        'Object moved permanently -- see URI list')
+    FOUND = 302, 'Found', 'Object moved temporarily -- see URI list'
+    SEE_OTHER = 303, 'See Other', 'Object moved -- see Method and URL list'
+    NOT_MODIFIED = (304, 'Not Modified',
+        'Document has not changed since given time')
+    USE_PROXY = (305, 'Use Proxy',
+        'You must use proxy specified in Location to access this resource')
+    TEMPORARY_REDIRECT = (307, 'Temporary Redirect',
+        'Object moved temporarily -- see URI list')
+    PERMANENT_REDIRECT = (308, 'Permanent Redirect',
+        'Object moved permanently -- see URI list')
+
+    # client error
+    BAD_REQUEST = (400, 'Bad Request',
+        'Bad request syntax or unsupported method')
+    UNAUTHORIZED = (401, 'Unauthorized',
+        'No permission -- see authorization schemes')
+    PAYMENT_REQUIRED = (402, 'Payment Required',
+        'No payment -- see charging schemes')
+    FORBIDDEN = (403, 'Forbidden',
+        'Request forbidden -- authorization will not help')
+    NOT_FOUND = (404, 'Not Found',
+        'Nothing matches the given URI')
+    METHOD_NOT_ALLOWED = (405, 'Method Not Allowed',
+        'Specified method is invalid for this resource')
+    NOT_ACCEPTABLE = (406, 'Not Acceptable',
+        'URI not available in preferred format')
+    PROXY_AUTHENTICATION_REQUIRED = (407,
+        'Proxy Authentication Required',
+        'You must authenticate with this proxy before proceeding')
+    REQUEST_TIMEOUT = (408, 'Request Timeout',
+        'Request timed out; try again later')
+    CONFLICT = 409, 'Conflict', 'Request conflict'
+    GONE = (410, 'Gone',
+        'URI no longer exists and has been permanently removed')
+    LENGTH_REQUIRED = (411, 'Length Required',
+        'Client must specify Content-Length')
+    PRECONDITION_FAILED = (412, 'Precondition Failed',
+        'Precondition in headers is false')
+    CONTENT_TOO_LARGE = (413, 'Content Too Large',
+        'Content is too large')
+    REQUEST_ENTITY_TOO_LARGE = CONTENT_TOO_LARGE
+    URI_TOO_LONG = (414, 'URI Too Long',
+        'URI is too long')
+    REQUEST_URI_TOO_LONG = URI_TOO_LONG
+    UNSUPPORTED_MEDIA_TYPE = (415, 'Unsupported Media Type',
+        'Entity body in unsupported format')
+    RANGE_NOT_SATISFIABLE = (416, 'Range Not Satisfiable',
+        'Cannot satisfy request range')
+    REQUESTED_RANGE_NOT_SATISFIABLE = RANGE_NOT_SATISFIABLE
+    EXPECTATION_FAILED = (417, 'Expectation Failed',
+        'Expect condition could not be satisfied')
+    IM_A_TEAPOT = (418, 'I\'m a Teapot',
+        'Server refuses to brew coffee because it is a teapot')
+    MISDIRECTED_REQUEST = (421, 'Misdirected Request',
+        'Server is not able to produce a response')
+    UNPROCESSABLE_CONTENT = (422, 'Unprocessable Content',
+        'Server is not able to process the contained instructions')
+    UNPROCESSABLE_ENTITY = UNPROCESSABLE_CONTENT
+    LOCKED = 423, 'Locked', 'Resource of a method is locked'
+    FAILED_DEPENDENCY = (424, 'Failed Dependency',
+        'Dependent action of the request failed')
+    TOO_EARLY = (425, 'Too Early',
+        'Server refuses to process a request that might be replayed')
+    UPGRADE_REQUIRED = (426, 'Upgrade Required',
+        'Server refuses to perform the request using the current protocol')
+    PRECONDITION_REQUIRED = (428, 'Precondition Required',
+        'The origin server requires the request to be conditional')
+    TOO_MANY_REQUESTS = (429, 'Too Many Requests',
+        'The user has sent too many requests in '
+        'a given amount of time ("rate limiting")')
+    REQUEST_HEADER_FIELDS_TOO_LARGE = (431,
+        'Request Header Fields Too Large',
+        'The server is unwilling to process the request because its header '
+        'fields are too large')
+    UNAVAILABLE_FOR_LEGAL_REASONS = (451,
+        'Unavailable For Legal Reasons',
+        'The server is denying access to the '
+        'resource as a consequence of a legal demand')
+
+    # server errors
+    INTERNAL_SERVER_ERROR = (500, 'Internal Server Error',
+        'Server got itself in trouble')
+    NOT_IMPLEMENTED = (501, 'Not Implemented',
+        'Server does not support this operation')
+    BAD_GATEWAY = (502, 'Bad Gateway',
+        'Invalid responses from another server/proxy')
+    SERVICE_UNAVAILABLE = (503, 'Service Unavailable',
+        'The server cannot process the request due to a high load')
+    GATEWAY_TIMEOUT = (504, 'Gateway Timeout',
+        'The gateway server did not receive a timely response')
+    HTTP_VERSION_NOT_SUPPORTED = (505, 'HTTP Version Not Supported',
+        'Cannot fulfill request')
+    VARIANT_ALSO_NEGOTIATES = (506, 'Variant Also Negotiates',
+        'Server has an internal configuration error')
+    INSUFFICIENT_STORAGE = (507, 'Insufficient Storage',
+        'Server is not able to store the representation')
+    LOOP_DETECTED = (508, 'Loop Detected',
+        'Server encountered an infinite loop while processing a request')
+    NOT_EXTENDED = (510, 'Not Extended',
+        'Request does not meet the resource access policy')
+    NETWORK_AUTHENTICATION_REQUIRED = (511,
+        'Network Authentication Required',
+        'The client needs to authenticate to gain network access')
+
+
+@_simple_enum(StrEnum)
+class HTTPMethod:
+    """HTTP methods and descriptions
+
+    Methods from the following RFCs are all observed:
+
+        * RFC 9110: HTTP Semantics, obsoletes 7231, which obsoleted 2616
+        * RFC 5789: PATCH Method for HTTP
+    """
+    def __new__(cls, value, description):
+        obj = str.__new__(cls, value)
+        obj._value_ = value
+        obj.description = description
+        return obj
+
+    def __repr__(self):
+        return "<%s.%s>" % (self.__class__.__name__, self._name_)
+
+    CONNECT = 'CONNECT', 'Establish a connection to the server.'
+    DELETE = 'DELETE', 'Remove the target.'
+    GET = 'GET', 'Retrieve the target.'
+    HEAD = 'HEAD', 'Same as GET, but only retrieve the status line and header section.'
+    OPTIONS = 'OPTIONS', 'Describe the communication options for the target.'
+    PATCH = 'PATCH', 'Apply partial modifications to a target.'
+    POST = 'POST', 'Perform target-specific processing with the request payload.'
+    PUT = 'PUT', 'Replace the target with the request payload.'
+    TRACE = 'TRACE', 'Perform a message loop-back test along the path to the target.'
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/client.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/client.py
new file mode 100644
index 0000000000000000000000000000000000000000..77f8d26291dfc23acf2b2fcd205a2531dd28e13e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/client.py
@@ -0,0 +1,1570 @@
+r"""HTTP/1.1 client library
+
+<intro stuff goes here>
+<other stuff, too>
+
+HTTPConnection goes through a number of "states", which define when a client
+may legally make another request or fetch the response for a particular
+request. This diagram details these state transitions:
+
+    (null)
+      |
+      | HTTPConnection()
+      v
+    Idle
+      |
+      | putrequest()
+      v
+    Request-started
+      |
+      | ( putheader() )*  endheaders()
+      v
+    Request-sent
+      |\_____________________________
+      |                              | getresponse() raises
+      | response = getresponse()     | ConnectionError
+      v                              v
+    Unread-response                Idle
+    [Response-headers-read]
+      |\____________________
+      |                     |
+      | response.read()     | putrequest()
+      v                     v
+    Idle                  Req-started-unread-response
+                     ______/|
+                   /        |
+   response.read() |        | ( putheader() )*  endheaders()
+                   v        v
+       Request-started    Req-sent-unread-response
+                            |
+                            | response.read()
+                            v
+                          Request-sent
+
+This diagram presents the following rules:
+  -- a second request may not be started until {response-headers-read}
+  -- a response [object] cannot be retrieved until {request-sent}
+  -- there is no differentiation between an unread response body and a
+     partially read response body
+
+Note: this enforcement is applied by the HTTPConnection class. The
+      HTTPResponse class does not enforce this state machine, which
+      implies sophisticated clients may accelerate the request/response
+      pipeline. Caution should be taken, though: accelerating the states
+      beyond the above pattern may imply knowledge of the server's
+      connection-close behavior for certain requests. For example, it
+      is impossible to tell whether the server will close the connection
+      UNTIL the response headers have been read; this means that further
+      requests cannot be placed into the pipeline until it is known that
+      the server will NOT be closing the connection.
+
+Logical State                  __state            __response
+-------------                  -------            ----------
+Idle                           _CS_IDLE           None
+Request-started                _CS_REQ_STARTED    None
+Request-sent                   _CS_REQ_SENT       None
+Unread-response                _CS_IDLE           <response_class>
+Req-started-unread-response    _CS_REQ_STARTED    <response_class>
+Req-sent-unread-response       _CS_REQ_SENT       <response_class>
+"""
+
+import email.parser
+import email.message
+import errno
+import http
+import io
+import re
+import socket
+import sys
+import collections.abc
+from urllib.parse import urlsplit
+
+# HTTPMessage, parse_headers(), and the HTTP status code constants are
+# intentionally omitted for simplicity
+__all__ = ["HTTPResponse", "HTTPConnection",
+           "HTTPException", "NotConnected", "UnknownProtocol",
+           "UnknownTransferEncoding", "UnimplementedFileMode",
+           "IncompleteRead", "InvalidURL", "ImproperConnectionState",
+           "CannotSendRequest", "CannotSendHeader", "ResponseNotReady",
+           "BadStatusLine", "LineTooLong", "RemoteDisconnected", "error",
+           "responses"]
+
+HTTP_PORT = 80
+HTTPS_PORT = 443
+
+_UNKNOWN = 'UNKNOWN'
+
+# connection states
+_CS_IDLE = 'Idle'
+_CS_REQ_STARTED = 'Request-started'
+_CS_REQ_SENT = 'Request-sent'
+
+
+# hack to maintain backwards compatibility
+globals().update(http.HTTPStatus.__members__)
+
+# another hack to maintain backwards compatibility
+# Mapping status codes to official W3C names
+responses = {v: v.phrase for v in http.HTTPStatus.__members__.values()}
+
+# maximal line length when calling readline().
+_MAXLINE = 65536
+_MAXHEADERS = 100
+
+# Data larger than this will be read in chunks, to prevent extreme
+# overallocation.
+_MIN_READ_BUF_SIZE = 1 << 20
+
+
+# Header name/value ABNF (http://tools.ietf.org/html/rfc7230#section-3.2)
+#
+# VCHAR          = %x21-7E
+# obs-text       = %x80-FF
+# header-field   = field-name ":" OWS field-value OWS
+# field-name     = token
+# field-value    = *( field-content / obs-fold )
+# field-content  = field-vchar [ 1*( SP / HTAB ) field-vchar ]
+# field-vchar    = VCHAR / obs-text
+#
+# obs-fold       = CRLF 1*( SP / HTAB )
+#                ; obsolete line folding
+#                ; see Section 3.2.4
+
+# token          = 1*tchar
+#
+# tchar          = "!" / "#" / "$" / "%" / "&" / "'" / "*"
+#                / "+" / "-" / "." / "^" / "_" / "`" / "|" / "~"
+#                / DIGIT / ALPHA
+#                ; any VCHAR, except delimiters
+#
+# VCHAR defined in http://tools.ietf.org/html/rfc5234#appendix-B.1
+
+# the patterns for both name and value are more lenient than RFC
+# definitions to allow for backwards compatibility
+_is_legal_header_name = re.compile(rb'[^:\s][^:\r\n]*').fullmatch
+_is_illegal_header_value = re.compile(rb'\n(?![ \t])|\r(?![ \t\n])').search
+
+# These characters are not allowed within HTTP URL paths.
+#  See https://tools.ietf.org/html/rfc3986#section-3.3 and the
+#  https://tools.ietf.org/html/rfc3986#appendix-A pchar definition.
+# Prevents CVE-2019-9740.  Includes control characters such as \r\n.
+# We don't restrict chars above \x7f as putrequest() limits us to ASCII.
+_contains_disallowed_url_pchar_re = re.compile('[\x00-\x20\x7f]')
+# Arguably only these _should_ allowed:
+#  _is_allowed_url_pchars_re = re.compile(r"^[/!$&'()*+,;=:@%a-zA-Z0-9._~-]+$")
+# We are more lenient for assumed real world compatibility purposes.
+
+# These characters are not allowed within HTTP method names
+# to prevent http header injection.
+_contains_disallowed_method_pchar_re = re.compile('[\x00-\x1f]')
+
+# We always set the Content-Length header for these methods because some
+# servers will otherwise respond with a 411
+_METHODS_EXPECTING_BODY = {'PATCH', 'POST', 'PUT'}
+
+
+def _encode(data, name='data'):
+    """Call data.encode("latin-1") but show a better error message."""
+    try:
+        return data.encode("latin-1")
+    except UnicodeEncodeError as err:
+        raise UnicodeEncodeError(
+            err.encoding,
+            err.object,
+            err.start,
+            err.end,
+            "%s (%.20r) is not valid Latin-1. Use %s.encode('utf-8') "
+            "if you want to send it encoded in UTF-8." %
+            (name.title(), data[err.start:err.end], name)) from None
+
+def _strip_ipv6_iface(enc_name: bytes) -> bytes:
+    """Remove interface scope from IPv6 address."""
+    enc_name, percent, _ = enc_name.partition(b"%")
+    if percent:
+        assert enc_name.startswith(b'['), enc_name
+        enc_name += b']'
+    return enc_name
+
+class HTTPMessage(email.message.Message):
+    # XXX The only usage of this method is in
+    # http.server.CGIHTTPRequestHandler.  Maybe move the code there so
+    # that it doesn't need to be part of the public API.  The API has
+    # never been defined so this could cause backwards compatibility
+    # issues.
+
+    def getallmatchingheaders(self, name):
+        """Find all header lines matching a given header name.
+
+        Look through the list of headers and find all lines matching a given
+        header name (and their continuation lines).  A list of the lines is
+        returned, without interpretation.  If the header does not occur, an
+        empty list is returned.  If the header occurs multiple times, all
+        occurrences are returned.  Case is not important in the header name.
+
+        """
+        name = name.lower() + ':'
+        n = len(name)
+        lst = []
+        hit = 0
+        for line in self.keys():
+            if line[:n].lower() == name:
+                hit = 1
+            elif not line[:1].isspace():
+                hit = 0
+            if hit:
+                lst.append(line)
+        return lst
+
+def _read_headers(fp):
+    """Reads potential header lines into a list from a file pointer.
+
+    Length of line is limited by _MAXLINE, and number of
+    headers is limited by _MAXHEADERS.
+    """
+    headers = []
+    while True:
+        line = fp.readline(_MAXLINE + 1)
+        if len(line) > _MAXLINE:
+            raise LineTooLong("header line")
+        headers.append(line)
+        if len(headers) > _MAXHEADERS:
+            raise HTTPException("got more than %d headers" % _MAXHEADERS)
+        if line in (b'\r\n', b'\n', b''):
+            break
+    return headers
+
+def _parse_header_lines(header_lines, _class=HTTPMessage):
+    """
+    Parses only RFC 5322 headers from header lines.
+
+    email Parser wants to see strings rather than bytes.
+    But a TextIOWrapper around self.rfile would buffer too many bytes
+    from the stream, bytes which we later need to read as bytes.
+    So we read the correct bytes here, as bytes, for email Parser
+    to parse.
+
+    """
+    hstring = b''.join(header_lines).decode('iso-8859-1')
+    return email.parser.Parser(_class=_class).parsestr(hstring)
+
+def parse_headers(fp, _class=HTTPMessage):
+    """Parses only RFC 5322 headers from a file pointer."""
+
+    headers = _read_headers(fp)
+    return _parse_header_lines(headers, _class)
+
+
+class HTTPResponse(io.BufferedIOBase):
+
+    # See RFC 2616 sec 19.6 and RFC 1945 sec 6 for details.
+
+    # The bytes from the socket object are iso-8859-1 strings.
+    # See RFC 2616 sec 2.2 which notes an exception for MIME-encoded
+    # text following RFC 2047.  The basic status line parsing only
+    # accepts iso-8859-1.
+
+    def __init__(self, sock, debuglevel=0, method=None, url=None):
+        # If the response includes a content-length header, we need to
+        # make sure that the client doesn't read more than the
+        # specified number of bytes.  If it does, it will block until
+        # the server times out and closes the connection.  This will
+        # happen if a self.fp.read() is done (without a size) whether
+        # self.fp is buffered or not.  So, no self.fp.read() by
+        # clients unless they know what they are doing.
+        self.fp = sock.makefile("rb")
+        self.debuglevel = debuglevel
+        self._method = method
+
+        # The HTTPResponse object is returned via urllib.  The clients
+        # of http and urllib expect different attributes for the
+        # headers.  headers is used here and supports urllib.  msg is
+        # provided as a backwards compatibility layer for http
+        # clients.
+
+        self.headers = self.msg = None
+
+        # from the Status-Line of the response
+        self.version = _UNKNOWN # HTTP-Version
+        self.status = _UNKNOWN  # Status-Code
+        self.reason = _UNKNOWN  # Reason-Phrase
+
+        self.chunked = _UNKNOWN         # is "chunked" being used?
+        self.chunk_left = _UNKNOWN      # bytes left to read in current chunk
+        self.length = _UNKNOWN          # number of bytes left in response
+        self.will_close = _UNKNOWN      # conn will close at end of response
+
+    def _read_status(self):
+        line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
+        if len(line) > _MAXLINE:
+            raise LineTooLong("status line")
+        if self.debuglevel > 0:
+            print("reply:", repr(line))
+        if not line:
+            # Presumably, the server closed the connection before
+            # sending a valid response.
+            raise RemoteDisconnected("Remote end closed connection without"
+                                     " response")
+        try:
+            version, status, reason = line.split(None, 2)
+        except ValueError:
+            try:
+                version, status = line.split(None, 1)
+                reason = ""
+            except ValueError:
+                # empty version will cause next test to fail.
+                version = ""
+        if not version.startswith("HTTP/"):
+            self._close_conn()
+            raise BadStatusLine(line)
+
+        # The status code is a three-digit number
+        try:
+            status = int(status)
+            if status < 100 or status > 999:
+                raise BadStatusLine(line)
+        except ValueError:
+            raise BadStatusLine(line)
+        return version, status, reason
+
+    def begin(self):
+        if self.headers is not None:
+            # we've already started reading the response
+            return
+
+        # read until we get a non-100 response
+        while True:
+            version, status, reason = self._read_status()
+            if status != CONTINUE:
+                break
+            # skip the header from the 100 response
+            skipped_headers = _read_headers(self.fp)
+            if self.debuglevel > 0:
+                print("headers:", skipped_headers)
+            del skipped_headers
+
+        self.code = self.status = status
+        self.reason = reason.strip()
+        if version in ("HTTP/1.0", "HTTP/0.9"):
+            # Some servers might still return "0.9", treat it as 1.0 anyway
+            self.version = 10
+        elif version.startswith("HTTP/1."):
+            self.version = 11   # use HTTP/1.1 code for HTTP/1.x where x>=1
+        else:
+            raise UnknownProtocol(version)
+
+        self.headers = self.msg = parse_headers(self.fp)
+
+        if self.debuglevel > 0:
+            for hdr, val in self.headers.items():
+                print("header:", hdr + ":", val)
+
+        # are we using the chunked-style of transfer encoding?
+        tr_enc = self.headers.get("transfer-encoding")
+        if tr_enc and tr_enc.lower() == "chunked":
+            self.chunked = True
+            self.chunk_left = None
+        else:
+            self.chunked = False
+
+        # will the connection close at the end of the response?
+        self.will_close = self._check_close()
+
+        # do we have a Content-Length?
+        # NOTE: RFC 2616, S4.4, #3 says we ignore this if tr_enc is "chunked"
+        self.length = None
+        length = self.headers.get("content-length")
+        if length and not self.chunked:
+            try:
+                self.length = int(length)
+            except ValueError:
+                self.length = None
+            else:
+                if self.length < 0:  # ignore nonsensical negative lengths
+                    self.length = None
+        else:
+            self.length = None
+
+        # does the body have a fixed length? (of zero)
+        if (status == NO_CONTENT or status == NOT_MODIFIED or
+            100 <= status < 200 or      # 1xx codes
+            self._method == "HEAD"):
+            self.length = 0
+
+        # if the connection remains open, and we aren't using chunked, and
+        # a content-length was not provided, then assume that the connection
+        # WILL close.
+        if (not self.will_close and
+            not self.chunked and
+            self.length is None):
+            self.will_close = True
+
+    def _check_close(self):
+        conn = self.headers.get("connection")
+        if self.version == 11:
+            # An HTTP/1.1 proxy is assumed to stay open unless
+            # explicitly closed.
+            if conn and "close" in conn.lower():
+                return True
+            return False
+
+        # Some HTTP/1.0 implementations have support for persistent
+        # connections, using rules different than HTTP/1.1.
+
+        # For older HTTP, Keep-Alive indicates persistent connection.
+        if self.headers.get("keep-alive"):
+            return False
+
+        # At least Akamai returns a "Connection: Keep-Alive" header,
+        # which was supposed to be sent by the client.
+        if conn and "keep-alive" in conn.lower():
+            return False
+
+        # Proxy-Connection is a netscape hack.
+        pconn = self.headers.get("proxy-connection")
+        if pconn and "keep-alive" in pconn.lower():
+            return False
+
+        # otherwise, assume it will close
+        return True
+
+    def _close_conn(self):
+        fp = self.fp
+        self.fp = None
+        fp.close()
+
+    def close(self):
+        try:
+            super().close() # set "closed" flag
+        finally:
+            if self.fp:
+                self._close_conn()
+
+    # These implementations are for the benefit of io.BufferedReader.
+
+    # XXX This class should probably be revised to act more like
+    # the "raw stream" that BufferedReader expects.
+
+    def flush(self):
+        super().flush()
+        if self.fp:
+            self.fp.flush()
+
+    def readable(self):
+        """Always returns True"""
+        return True
+
+    # End of "raw stream" methods
+
+    def isclosed(self):
+        """True if the connection is closed."""
+        # NOTE: it is possible that we will not ever call self.close(). This
+        #       case occurs when will_close is TRUE, length is None, and we
+        #       read up to the last byte, but NOT past it.
+        #
+        # IMPLIES: if will_close is FALSE, then self.close() will ALWAYS be
+        #          called, meaning self.isclosed() is meaningful.
+        return self.fp is None
+
+    def read(self, amt=None):
+        """Read and return the response body, or up to the next amt bytes."""
+        if self.fp is None:
+            return b""
+
+        if self._method == "HEAD":
+            self._close_conn()
+            return b""
+
+        if self.chunked:
+            return self._read_chunked(amt)
+
+        if amt is not None and amt >= 0:
+            if self.length is not None and amt > self.length:
+                # clip the read to the "end of response"
+                amt = self.length
+            s = self.fp.read(amt)
+            if not s and amt:
+                # Ideally, we would raise IncompleteRead if the content-length
+                # wasn't satisfied, but it might break compatibility.
+                self._close_conn()
+            elif self.length is not None:
+                self.length -= len(s)
+                if not self.length:
+                    self._close_conn()
+            return s
+        else:
+            # Amount is not given (unbounded read) so we must check self.length
+            if self.length is None:
+                s = self.fp.read()
+            else:
+                try:
+                    s = self._safe_read(self.length)
+                except IncompleteRead:
+                    self._close_conn()
+                    raise
+                self.length = 0
+            self._close_conn()        # we read everything
+            return s
+
+    def readinto(self, b):
+        """Read up to len(b) bytes into bytearray b and return the number
+        of bytes read.
+        """
+
+        if self.fp is None:
+            return 0
+
+        if self._method == "HEAD":
+            self._close_conn()
+            return 0
+
+        if self.chunked:
+            return self._readinto_chunked(b)
+
+        if self.length is not None:
+            if len(b) > self.length:
+                # clip the read to the "end of response"
+                b = memoryview(b)[0:self.length]
+
+        # we do not use _safe_read() here because this may be a .will_close
+        # connection, and the user is reading more bytes than will be provided
+        # (for example, reading in 1k chunks)
+        n = self.fp.readinto(b)
+        if not n and b:
+            # Ideally, we would raise IncompleteRead if the content-length
+            # wasn't satisfied, but it might break compatibility.
+            self._close_conn()
+        elif self.length is not None:
+            self.length -= n
+            if not self.length:
+                self._close_conn()
+        return n
+
+    def _read_next_chunk_size(self):
+        # Read the next chunk size from the file
+        line = self.fp.readline(_MAXLINE + 1)
+        if len(line) > _MAXLINE:
+            raise LineTooLong("chunk size")
+        i = line.find(b";")
+        if i >= 0:
+            line = line[:i] # strip chunk-extensions
+        try:
+            return int(line, 16)
+        except ValueError:
+            # close the connection as protocol synchronisation is
+            # probably lost
+            self._close_conn()
+            raise
+
+    def _read_and_discard_trailer(self):
+        # read and discard trailer up to the CRLF terminator
+        ### note: we shouldn't have any trailers!
+        while True:
+            line = self.fp.readline(_MAXLINE + 1)
+            if len(line) > _MAXLINE:
+                raise LineTooLong("trailer line")
+            if not line:
+                # a vanishingly small number of sites EOF without
+                # sending the trailer
+                break
+            if line in (b'\r\n', b'\n', b''):
+                break
+
+    def _get_chunk_left(self):
+        # return self.chunk_left, reading a new chunk if necessary.
+        # chunk_left == 0: at the end of the current chunk, need to close it
+        # chunk_left == None: No current chunk, should read next.
+        # This function returns non-zero or None if the last chunk has
+        # been read.
+        chunk_left = self.chunk_left
+        if not chunk_left: # Can be 0 or None
+            if chunk_left is not None:
+                # We are at the end of chunk, discard chunk end
+                self._safe_read(2)  # toss the CRLF at the end of the chunk
+            try:
+                chunk_left = self._read_next_chunk_size()
+            except ValueError:
+                raise IncompleteRead(b'')
+            if chunk_left == 0:
+                # last chunk: 1*("0") [ chunk-extension ] CRLF
+                self._read_and_discard_trailer()
+                # we read everything; close the "file"
+                self._close_conn()
+                chunk_left = None
+            self.chunk_left = chunk_left
+        return chunk_left
+
+    def _read_chunked(self, amt=None):
+        assert self.chunked != _UNKNOWN
+        if amt is not None and amt < 0:
+            amt = None
+        value = []
+        try:
+            while (chunk_left := self._get_chunk_left()) is not None:
+                if amt is not None and amt <= chunk_left:
+                    value.append(self._safe_read(amt))
+                    self.chunk_left = chunk_left - amt
+                    break
+
+                value.append(self._safe_read(chunk_left))
+                if amt is not None:
+                    amt -= chunk_left
+                self.chunk_left = 0
+            return b''.join(value)
+        except IncompleteRead as exc:
+            raise IncompleteRead(b''.join(value)) from exc
+
+    def _readinto_chunked(self, b):
+        assert self.chunked != _UNKNOWN
+        total_bytes = 0
+        mvb = memoryview(b)
+        try:
+            while True:
+                chunk_left = self._get_chunk_left()
+                if chunk_left is None:
+                    return total_bytes
+
+                if len(mvb) <= chunk_left:
+                    n = self._safe_readinto(mvb)
+                    self.chunk_left = chunk_left - n
+                    return total_bytes + n
+
+                temp_mvb = mvb[:chunk_left]
+                n = self._safe_readinto(temp_mvb)
+                mvb = mvb[n:]
+                total_bytes += n
+                self.chunk_left = 0
+
+        except IncompleteRead:
+            raise IncompleteRead(bytes(b[0:total_bytes]))
+
+    def _safe_read(self, amt):
+        """Read the number of bytes requested.
+
+        This function should be used when <amt> bytes "should" be present for
+        reading. If the bytes are truly not available (due to EOF), then the
+        IncompleteRead exception can be used to detect the problem.
+        """
+        cursize = min(amt, _MIN_READ_BUF_SIZE)
+        data = self.fp.read(cursize)
+        if len(data) >= amt:
+            return data
+        if len(data) < cursize:
+            raise IncompleteRead(data, amt - len(data))
+
+        data = io.BytesIO(data)
+        data.seek(0, 2)
+        while True:
+            # This is a geometric increase in read size (never more than
+            # doubling out the current length of data per loop iteration).
+            delta = min(cursize, amt - cursize)
+            data.write(self.fp.read(delta))
+            if data.tell() >= amt:
+                return data.getvalue()
+            cursize += delta
+            if data.tell() < cursize:
+                raise IncompleteRead(data.getvalue(), amt - data.tell())
+
+    def _safe_readinto(self, b):
+        """Same as _safe_read, but for reading into a buffer."""
+        amt = len(b)
+        n = self.fp.readinto(b)
+        if n < amt:
+            raise IncompleteRead(bytes(b[:n]), amt-n)
+        return n
+
+    def read1(self, n=-1):
+        """Read with at most one underlying system call.  If at least one
+        byte is buffered, return that instead.
+        """
+        if self.fp is None or self._method == "HEAD":
+            return b""
+        if self.chunked:
+            return self._read1_chunked(n)
+        if self.length is not None and (n < 0 or n > self.length):
+            n = self.length
+        result = self.fp.read1(n)
+        if not result and n:
+            self._close_conn()
+        elif self.length is not None:
+            self.length -= len(result)
+            if not self.length:
+                self._close_conn()
+        return result
+
+    def peek(self, n=-1):
+        # Having this enables IOBase.readline() to read more than one
+        # byte at a time
+        if self.fp is None or self._method == "HEAD":
+            return b""
+        if self.chunked:
+            return self._peek_chunked(n)
+        return self.fp.peek(n)
+
+    def readline(self, limit=-1):
+        if self.fp is None or self._method == "HEAD":
+            return b""
+        if self.chunked:
+            # Fallback to IOBase readline which uses peek() and read()
+            return super().readline(limit)
+        if self.length is not None and (limit < 0 or limit > self.length):
+            limit = self.length
+        result = self.fp.readline(limit)
+        if not result and limit:
+            self._close_conn()
+        elif self.length is not None:
+            self.length -= len(result)
+            if not self.length:
+                self._close_conn()
+        return result
+
+    def _read1_chunked(self, n):
+        # Strictly speaking, _get_chunk_left() may cause more than one read,
+        # but that is ok, since that is to satisfy the chunked protocol.
+        chunk_left = self._get_chunk_left()
+        if chunk_left is None or n == 0:
+            return b''
+        if not (0 <= n <= chunk_left):
+            n = chunk_left # if n is negative or larger than chunk_left
+        read = self.fp.read1(n)
+        self.chunk_left -= len(read)
+        if not read:
+            raise IncompleteRead(b"")
+        return read
+
+    def _peek_chunked(self, n):
+        # Strictly speaking, _get_chunk_left() may cause more than one read,
+        # but that is ok, since that is to satisfy the chunked protocol.
+        try:
+            chunk_left = self._get_chunk_left()
+        except IncompleteRead:
+            return b'' # peek doesn't worry about protocol
+        if chunk_left is None:
+            return b'' # eof
+        # peek is allowed to return more than requested.  Just request the
+        # entire chunk, and truncate what we get.
+        return self.fp.peek(chunk_left)[:chunk_left]
+
+    def fileno(self):
+        return self.fp.fileno()
+
+    def getheader(self, name, default=None):
+        '''Returns the value of the header matching *name*.
+
+        If there are multiple matching headers, the values are
+        combined into a single string separated by commas and spaces.
+
+        If no matching header is found, returns *default* or None if
+        the *default* is not specified.
+
+        If the headers are unknown, raises http.client.ResponseNotReady.
+
+        '''
+        if self.headers is None:
+            raise ResponseNotReady()
+        headers = self.headers.get_all(name) or default
+        if isinstance(headers, str) or not hasattr(headers, '__iter__'):
+            return headers
+        else:
+            return ', '.join(headers)
+
+    def getheaders(self):
+        """Return list of (header, value) tuples."""
+        if self.headers is None:
+            raise ResponseNotReady()
+        return list(self.headers.items())
+
+    # We override IOBase.__iter__ so that it doesn't check for closed-ness
+
+    def __iter__(self):
+        return self
+
+    # For compatibility with old-style urllib responses.
+
+    def info(self):
+        '''Returns an instance of the class mimetools.Message containing
+        meta-information associated with the URL.
+
+        When the method is HTTP, these headers are those returned by
+        the server at the head of the retrieved HTML page (including
+        Content-Length and Content-Type).
+
+        When the method is FTP, a Content-Length header will be
+        present if (as is now usual) the server passed back a file
+        length in response to the FTP retrieval request. A
+        Content-Type header will be present if the MIME type can be
+        guessed.
+
+        When the method is local-file, returned headers will include
+        a Date representing the file's last-modified time, a
+        Content-Length giving file size, and a Content-Type
+        containing a guess at the file's type. See also the
+        description of the mimetools module.
+
+        '''
+        return self.headers
+
+    def geturl(self):
+        '''Return the real URL of the page.
+
+        In some cases, the HTTP server redirects a client to another
+        URL. The urlopen() function handles this transparently, but in
+        some cases the caller needs to know which URL the client was
+        redirected to. The geturl() method can be used to get at this
+        redirected URL.
+
+        '''
+        return self.url
+
+    def getcode(self):
+        '''Return the HTTP status code that was sent with the response,
+        or None if the URL is not an HTTP URL.
+
+        '''
+        return self.status
+
+
+def _create_https_context(http_version):
+    # Function also used by urllib.request to be able to set the check_hostname
+    # attribute on a context object.
+    context = ssl._create_default_https_context()
+    # send ALPN extension to indicate HTTP/1.1 protocol
+    if http_version == 11:
+        context.set_alpn_protocols(['http/1.1'])
+    # enable PHA for TLS 1.3 connections if available
+    if context.post_handshake_auth is not None:
+        context.post_handshake_auth = True
+    return context
+
+
+class HTTPConnection:
+
+    _http_vsn = 11
+    _http_vsn_str = 'HTTP/1.1'
+
+    response_class = HTTPResponse
+    default_port = HTTP_PORT
+    auto_open = 1
+    debuglevel = 0
+
+    @staticmethod
+    def _is_textIO(stream):
+        """Test whether a file-like object is a text or a binary stream.
+        """
+        return isinstance(stream, io.TextIOBase)
+
+    @staticmethod
+    def _get_content_length(body, method):
+        """Get the content-length based on the body.
+
+        If the body is None, we set Content-Length: 0 for methods that expect
+        a body (RFC 7230, Section 3.3.2). We also set the Content-Length for
+        any method if the body is a str or bytes-like object and not a file.
+        """
+        if body is None:
+            # do an explicit check for not None here to distinguish
+            # between unset and set but empty
+            if method.upper() in _METHODS_EXPECTING_BODY:
+                return 0
+            else:
+                return None
+
+        if hasattr(body, 'read'):
+            # file-like object.
+            return None
+
+        try:
+            # does it implement the buffer protocol (bytes, bytearray, array)?
+            mv = memoryview(body)
+            return mv.nbytes
+        except TypeError:
+            pass
+
+        if isinstance(body, str):
+            return len(body)
+
+        return None
+
+    def __init__(self, host, port=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT,
+                 source_address=None, blocksize=8192):
+        self.timeout = timeout
+        self.source_address = source_address
+        self.blocksize = blocksize
+        self.sock = None
+        self._buffer = []
+        self.__response = None
+        self.__state = _CS_IDLE
+        self._method = None
+        self._tunnel_host = None
+        self._tunnel_port = None
+        self._tunnel_headers = {}
+        self._raw_proxy_headers = None
+
+        (self.host, self.port) = self._get_hostport(host, port)
+
+        self._validate_host(self.host)
+
+        # This is stored as an instance variable to allow unit
+        # tests to replace it with a suitable mockup
+        self._create_connection = socket.create_connection
+
+    def set_tunnel(self, host, port=None, headers=None):
+        """Set up host and port for HTTP CONNECT tunnelling.
+
+        In a connection that uses HTTP CONNECT tunnelling, the host passed to
+        the constructor is used as a proxy server that relays all communication
+        to the endpoint passed to `set_tunnel`. This done by sending an HTTP
+        CONNECT request to the proxy server when the connection is established.
+
+        This method must be called before the HTTP connection has been
+        established.
+
+        The headers argument should be a mapping of extra HTTP headers to send
+        with the CONNECT request.
+
+        As HTTP/1.1 is used for HTTP CONNECT tunnelling request, as per the RFC
+        (https://tools.ietf.org/html/rfc7231#section-4.3.6), a HTTP Host:
+        header must be provided, matching the authority-form of the request
+        target provided as the destination for the CONNECT request. If a
+        HTTP Host: header is not provided via the headers argument, one
+        is generated and transmitted automatically.
+        """
+
+        if self.sock:
+            raise RuntimeError("Can't set up tunnel for established connection")
+
+        self._tunnel_host, self._tunnel_port = self._get_hostport(host, port)
+        if headers:
+            self._tunnel_headers = headers.copy()
+        else:
+            self._tunnel_headers.clear()
+
+        if not any(header.lower() == "host" for header in self._tunnel_headers):
+            encoded_host = self._tunnel_host.encode("idna").decode("ascii")
+            self._tunnel_headers["Host"] = "%s:%d" % (
+                encoded_host, self._tunnel_port)
+
+    def _get_hostport(self, host, port):
+        if port is None:
+            i = host.rfind(':')
+            j = host.rfind(']')         # ipv6 addresses have [...]
+            if i > j:
+                try:
+                    port = int(host[i+1:])
+                except ValueError:
+                    if host[i+1:] == "": # http://foo.com:/ == http://foo.com/
+                        port = self.default_port
+                    else:
+                        raise InvalidURL("nonnumeric port: '%s'" % host[i+1:])
+                host = host[:i]
+            else:
+                port = self.default_port
+        if host and host[0] == '[' and host[-1] == ']':
+            host = host[1:-1]
+
+        return (host, port)
+
+    def set_debuglevel(self, level):
+        self.debuglevel = level
+
+    def _wrap_ipv6(self, ip):
+        if b':' in ip and ip[0] != b'['[0]:
+            return b"[" + ip + b"]"
+        return ip
+
+    def _tunnel(self):
+        connect = b"CONNECT %s:%d %s\r\n" % (
+            self._wrap_ipv6(self._tunnel_host.encode("idna")),
+            self._tunnel_port,
+            self._http_vsn_str.encode("ascii"))
+        headers = [connect]
+        for header, value in self._tunnel_headers.items():
+            headers.append(f"{header}: {value}\r\n".encode("latin-1"))
+        headers.append(b"\r\n")
+        # Making a single send() call instead of one per line encourages
+        # the host OS to use a more optimal packet size instead of
+        # potentially emitting a series of small packets.
+        self.send(b"".join(headers))
+        del headers
+
+        response = self.response_class(self.sock, method=self._method)
+        try:
+            (version, code, message) = response._read_status()
+
+            self._raw_proxy_headers = _read_headers(response.fp)
+
+            if self.debuglevel > 0:
+                for header in self._raw_proxy_headers:
+                    print('header:', header.decode())
+
+            if code != http.HTTPStatus.OK:
+                self.close()
+                raise OSError(f"Tunnel connection failed: {code} {message.strip()}")
+
+        finally:
+            response.close()
+
+    def get_proxy_response_headers(self):
+        """
+        Returns a dictionary with the headers of the response
+        received from the proxy server to the CONNECT request
+        sent to set the tunnel.
+
+        If the CONNECT request was not sent, the method returns None.
+        """
+        return (
+            _parse_header_lines(self._raw_proxy_headers)
+            if self._raw_proxy_headers is not None
+            else None
+        )
+
+    def connect(self):
+        """Connect to the host and port specified in __init__."""
+        sys.audit("http.client.connect", self, self.host, self.port)
+        self.sock = self._create_connection(
+            (self.host,self.port), self.timeout, self.source_address)
+        # Might fail in OSs that don't implement TCP_NODELAY
+        try:
+            self.sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
+        except OSError as e:
+            if e.errno != errno.ENOPROTOOPT:
+                raise
+
+        if self._tunnel_host:
+            self._tunnel()
+
+    def close(self):
+        """Close the connection to the HTTP server."""
+        self.__state = _CS_IDLE
+        try:
+            sock = self.sock
+            if sock:
+                self.sock = None
+                sock.close()   # close it manually... there may be other refs
+        finally:
+            response = self.__response
+            if response:
+                self.__response = None
+                response.close()
+
+    def send(self, data):
+        """Send 'data' to the server.
+        ``data`` can be a string object, a bytes object, an array object, a
+        file-like object that supports a .read() method, or an iterable object.
+        """
+
+        if self.sock is None:
+            if self.auto_open:
+                self.connect()
+            else:
+                raise NotConnected()
+
+        if self.debuglevel > 0:
+            print("send:", repr(data))
+        if hasattr(data, "read") :
+            if self.debuglevel > 0:
+                print("sending a readable")
+            encode = self._is_textIO(data)
+            if encode and self.debuglevel > 0:
+                print("encoding file using iso-8859-1")
+            while datablock := data.read(self.blocksize):
+                if encode:
+                    datablock = datablock.encode("iso-8859-1")
+                sys.audit("http.client.send", self, datablock)
+                self.sock.sendall(datablock)
+            return
+        sys.audit("http.client.send", self, data)
+        try:
+            self.sock.sendall(data)
+        except TypeError:
+            if isinstance(data, collections.abc.Iterable):
+                for d in data:
+                    self.sock.sendall(d)
+            else:
+                raise TypeError("data should be a bytes-like object "
+                                "or an iterable, got %r" % type(data))
+
+    def _output(self, s):
+        """Add a line of output to the current request buffer.
+
+        Assumes that the line does *not* end with \\r\\n.
+        """
+        self._buffer.append(s)
+
+    def _read_readable(self, readable):
+        if self.debuglevel > 0:
+            print("reading a readable")
+        encode = self._is_textIO(readable)
+        if encode and self.debuglevel > 0:
+            print("encoding file using iso-8859-1")
+        while datablock := readable.read(self.blocksize):
+            if encode:
+                datablock = datablock.encode("iso-8859-1")
+            yield datablock
+
+    def _send_output(self, message_body=None, encode_chunked=False):
+        """Send the currently buffered request and clear the buffer.
+
+        Appends an extra \\r\\n to the buffer.
+        A message_body may be specified, to be appended to the request.
+        """
+        self._buffer.extend((b"", b""))
+        msg = b"\r\n".join(self._buffer)
+        del self._buffer[:]
+        self.send(msg)
+
+        if message_body is not None:
+
+            # create a consistent interface to message_body
+            if hasattr(message_body, 'read'):
+                # Let file-like take precedence over byte-like.  This
+                # is needed to allow the current position of mmap'ed
+                # files to be taken into account.
+                chunks = self._read_readable(message_body)
+            else:
+                try:
+                    # this is solely to check to see if message_body
+                    # implements the buffer API.  it /would/ be easier
+                    # to capture if PyObject_CheckBuffer was exposed
+                    # to Python.
+                    memoryview(message_body)
+                except TypeError:
+                    try:
+                        chunks = iter(message_body)
+                    except TypeError:
+                        raise TypeError("message_body should be a bytes-like "
+                                        "object or an iterable, got %r"
+                                        % type(message_body))
+                else:
+                    # the object implements the buffer interface and
+                    # can be passed directly into socket methods
+                    chunks = (message_body,)
+
+            for chunk in chunks:
+                if not chunk:
+                    if self.debuglevel > 0:
+                        print('Zero length chunk ignored')
+                    continue
+
+                if encode_chunked and self._http_vsn == 11:
+                    # chunked encoding
+                    chunk = f'{len(chunk):X}\r\n'.encode('ascii') + chunk \
+                        + b'\r\n'
+                self.send(chunk)
+
+            if encode_chunked and self._http_vsn == 11:
+                # end chunked transfer
+                self.send(b'0\r\n\r\n')
+
+    def putrequest(self, method, url, skip_host=False,
+                   skip_accept_encoding=False):
+        """Send a request to the server.
+
+        'method' specifies an HTTP request method, e.g. 'GET'.
+        'url' specifies the object being requested, e.g. '/index.html'.
+        'skip_host' if True does not add automatically a 'Host:' header
+        'skip_accept_encoding' if True does not add automatically an
+           'Accept-Encoding:' header
+        """
+
+        # if a prior response has been completed, then forget about it.
+        if self.__response and self.__response.isclosed():
+            self.__response = None
+
+
+        # in certain cases, we cannot issue another request on this connection.
+        # this occurs when:
+        #   1) we are in the process of sending a request.   (_CS_REQ_STARTED)
+        #   2) a response to a previous request has signalled that it is going
+        #      to close the connection upon completion.
+        #   3) the headers for the previous response have not been read, thus
+        #      we cannot determine whether point (2) is true.   (_CS_REQ_SENT)
+        #
+        # if there is no prior response, then we can request at will.
+        #
+        # if point (2) is true, then we will have passed the socket to the
+        # response (effectively meaning, "there is no prior response"), and
+        # will open a new one when a new request is made.
+        #
+        # Note: if a prior response exists, then we *can* start a new request.
+        #       We are not allowed to begin fetching the response to this new
+        #       request, however, until that prior response is complete.
+        #
+        if self.__state == _CS_IDLE:
+            self.__state = _CS_REQ_STARTED
+        else:
+            raise CannotSendRequest(self.__state)
+
+        self._validate_method(method)
+
+        # Save the method for use later in the response phase
+        self._method = method
+
+        url = url or '/'
+        self._validate_path(url)
+
+        request = '%s %s %s' % (method, url, self._http_vsn_str)
+
+        self._output(self._encode_request(request))
+
+        if self._http_vsn == 11:
+            # Issue some standard headers for better HTTP/1.1 compliance
+
+            if not skip_host:
+                # this header is issued *only* for HTTP/1.1
+                # connections. more specifically, this means it is
+                # only issued when the client uses the new
+                # HTTPConnection() class. backwards-compat clients
+                # will be using HTTP/1.0 and those clients may be
+                # issuing this header themselves. we should NOT issue
+                # it twice; some web servers (such as Apache) barf
+                # when they see two Host: headers
+
+                # If we need a non-standard port,include it in the
+                # header.  If the request is going through a proxy,
+                # but the host of the actual URL, not the host of the
+                # proxy.
+
+                netloc = ''
+                if url.startswith('http'):
+                    nil, netloc, nil, nil, nil = urlsplit(url)
+
+                if netloc:
+                    try:
+                        netloc_enc = netloc.encode("ascii")
+                    except UnicodeEncodeError:
+                        netloc_enc = netloc.encode("idna")
+                    self.putheader('Host', _strip_ipv6_iface(netloc_enc))
+                else:
+                    if self._tunnel_host:
+                        host = self._tunnel_host
+                        port = self._tunnel_port
+                    else:
+                        host = self.host
+                        port = self.port
+
+                    try:
+                        host_enc = host.encode("ascii")
+                    except UnicodeEncodeError:
+                        host_enc = host.encode("idna")
+
+                    # As per RFC 273, IPv6 address should be wrapped with []
+                    # when used as Host header
+                    host_enc = self._wrap_ipv6(host_enc)
+                    if ":" in host:
+                        host_enc = _strip_ipv6_iface(host_enc)
+
+                    if port == self.default_port:
+                        self.putheader('Host', host_enc)
+                    else:
+                        host_enc = host_enc.decode("ascii")
+                        self.putheader('Host', "%s:%s" % (host_enc, port))
+
+            # note: we are assuming that clients will not attempt to set these
+            #       headers since *this* library must deal with the
+            #       consequences. this also means that when the supporting
+            #       libraries are updated to recognize other forms, then this
+            #       code should be changed (removed or updated).
+
+            # we only want a Content-Encoding of "identity" since we don't
+            # support encodings such as x-gzip or x-deflate.
+            if not skip_accept_encoding:
+                self.putheader('Accept-Encoding', 'identity')
+
+            # we can accept "chunked" Transfer-Encodings, but no others
+            # NOTE: no TE header implies *only* "chunked"
+            #self.putheader('TE', 'chunked')
+
+            # if TE is supplied in the header, then it must appear in a
+            # Connection header.
+            #self.putheader('Connection', 'TE')
+
+        else:
+            # For HTTP/1.0, the server will assume "not chunked"
+            pass
+
+    def _encode_request(self, request):
+        # ASCII also helps prevent CVE-2019-9740.
+        return request.encode('ascii')
+
+    def _validate_method(self, method):
+        """Validate a method name for putrequest."""
+        # prevent http header injection
+        match = _contains_disallowed_method_pchar_re.search(method)
+        if match:
+            raise ValueError(
+                    f"method can't contain control characters. {method!r} "
+                    f"(found at least {match.group()!r})")
+
+    def _validate_path(self, url):
+        """Validate a url for putrequest."""
+        # Prevent CVE-2019-9740.
+        match = _contains_disallowed_url_pchar_re.search(url)
+        if match:
+            raise InvalidURL(f"URL can't contain control characters. {url!r} "
+                             f"(found at least {match.group()!r})")
+
+    def _validate_host(self, host):
+        """Validate a host so it doesn't contain control characters."""
+        # Prevent CVE-2019-18348.
+        match = _contains_disallowed_url_pchar_re.search(host)
+        if match:
+            raise InvalidURL(f"URL can't contain control characters. {host!r} "
+                             f"(found at least {match.group()!r})")
+
+    def putheader(self, header, *values):
+        """Send a request header line to the server.
+
+        For example: h.putheader('Accept', 'text/html')
+        """
+        if self.__state != _CS_REQ_STARTED:
+            raise CannotSendHeader()
+
+        if hasattr(header, 'encode'):
+            header = header.encode('ascii')
+
+        if not _is_legal_header_name(header):
+            raise ValueError('Invalid header name %r' % (header,))
+
+        values = list(values)
+        for i, one_value in enumerate(values):
+            if hasattr(one_value, 'encode'):
+                values[i] = one_value.encode('latin-1')
+            elif isinstance(one_value, int):
+                values[i] = str(one_value).encode('ascii')
+
+            if _is_illegal_header_value(values[i]):
+                raise ValueError('Invalid header value %r' % (values[i],))
+
+        value = b'\r\n\t'.join(values)
+        header = header + b': ' + value
+        self._output(header)
+
+    def endheaders(self, message_body=None, *, encode_chunked=False):
+        """Indicate that the last header line has been sent to the server.
+
+        This method sends the request to the server.  The optional message_body
+        argument can be used to pass a message body associated with the
+        request.
+        """
+        if self.__state == _CS_REQ_STARTED:
+            self.__state = _CS_REQ_SENT
+        else:
+            raise CannotSendHeader()
+        self._send_output(message_body, encode_chunked=encode_chunked)
+
+    def request(self, method, url, body=None, headers={}, *,
+                encode_chunked=False):
+        """Send a complete request to the server."""
+        self._send_request(method, url, body, headers, encode_chunked)
+
+    def _send_request(self, method, url, body, headers, encode_chunked):
+        # Honor explicitly requested Host: and Accept-Encoding: headers.
+        header_names = frozenset(k.lower() for k in headers)
+        skips = {}
+        if 'host' in header_names:
+            skips['skip_host'] = 1
+        if 'accept-encoding' in header_names:
+            skips['skip_accept_encoding'] = 1
+
+        self.putrequest(method, url, **skips)
+
+        # chunked encoding will happen if HTTP/1.1 is used and either
+        # the caller passes encode_chunked=True or the following
+        # conditions hold:
+        # 1. content-length has not been explicitly set
+        # 2. the body is a file or iterable, but not a str or bytes-like
+        # 3. Transfer-Encoding has NOT been explicitly set by the caller
+
+        if 'content-length' not in header_names:
+            # only chunk body if not explicitly set for backwards
+            # compatibility, assuming the client code is already handling the
+            # chunking
+            if 'transfer-encoding' not in header_names:
+                # if content-length cannot be automatically determined, fall
+                # back to chunked encoding
+                encode_chunked = False
+                content_length = self._get_content_length(body, method)
+                if content_length is None:
+                    if body is not None:
+                        if self.debuglevel > 0:
+                            print('Unable to determine size of %r' % body)
+                        encode_chunked = True
+                        self.putheader('Transfer-Encoding', 'chunked')
+                else:
+                    self.putheader('Content-Length', str(content_length))
+        else:
+            encode_chunked = False
+
+        for hdr, value in headers.items():
+            self.putheader(hdr, value)
+        if isinstance(body, str):
+            # RFC 2616 Section 3.7.1 says that text default has a
+            # default charset of iso-8859-1.
+            body = _encode(body, 'body')
+        self.endheaders(body, encode_chunked=encode_chunked)
+
+    def getresponse(self):
+        """Get the response from the server.
+
+        If the HTTPConnection is in the correct state, returns an
+        instance of HTTPResponse or of whatever object is returned by
+        the response_class variable.
+
+        If a request has not been sent or if a previous response has
+        not be handled, ResponseNotReady is raised.  If the HTTP
+        response indicates that the connection should be closed, then
+        it will be closed before the response is returned.  When the
+        connection is closed, the underlying socket is closed.
+        """
+
+        # if a prior response has been completed, then forget about it.
+        if self.__response and self.__response.isclosed():
+            self.__response = None
+
+        # if a prior response exists, then it must be completed (otherwise, we
+        # cannot read this response's header to determine the connection-close
+        # behavior)
+        #
+        # note: if a prior response existed, but was connection-close, then the
+        # socket and response were made independent of this HTTPConnection
+        # object since a new request requires that we open a whole new
+        # connection
+        #
+        # this means the prior response had one of two states:
+        #   1) will_close: this connection was reset and the prior socket and
+        #                  response operate independently
+        #   2) persistent: the response was retained and we await its
+        #                  isclosed() status to become true.
+        #
+        if self.__state != _CS_REQ_SENT or self.__response:
+            raise ResponseNotReady(self.__state)
+
+        if self.debuglevel > 0:
+            response = self.response_class(self.sock, self.debuglevel,
+                                           method=self._method)
+        else:
+            response = self.response_class(self.sock, method=self._method)
+
+        try:
+            try:
+                response.begin()
+            except ConnectionError:
+                self.close()
+                raise
+            assert response.will_close != _UNKNOWN
+            self.__state = _CS_IDLE
+
+            if response.will_close:
+                # this effectively passes the connection to the response
+                self.close()
+            else:
+                # remember this, so we can tell when it is complete
+                self.__response = response
+
+            return response
+        except:
+            response.close()
+            raise
+
+try:
+    import ssl
+except ImportError:
+    pass
+else:
+    class HTTPSConnection(HTTPConnection):
+        "This class allows communication via SSL."
+
+        default_port = HTTPS_PORT
+
+        def __init__(self, host, port=None,
+                     *, timeout=socket._GLOBAL_DEFAULT_TIMEOUT,
+                     source_address=None, context=None, blocksize=8192):
+            super(HTTPSConnection, self).__init__(host, port, timeout,
+                                                  source_address,
+                                                  blocksize=blocksize)
+            if context is None:
+                context = _create_https_context(self._http_vsn)
+            self._context = context
+
+        def connect(self):
+            "Connect to a host on a given (SSL) port."
+
+            super().connect()
+
+            if self._tunnel_host:
+                server_hostname = self._tunnel_host
+            else:
+                server_hostname = self.host
+
+            self.sock = self._context.wrap_socket(self.sock,
+                                                  server_hostname=server_hostname)
+
+    __all__.append("HTTPSConnection")
+
+class HTTPException(Exception):
+    # Subclasses that define an __init__ must call Exception.__init__
+    # or define self.args.  Otherwise, str() will fail.
+    pass
+
+class NotConnected(HTTPException):
+    pass
+
+class InvalidURL(HTTPException):
+    pass
+
+class UnknownProtocol(HTTPException):
+    def __init__(self, version):
+        self.args = version,
+        self.version = version
+
+class UnknownTransferEncoding(HTTPException):
+    pass
+
+class UnimplementedFileMode(HTTPException):
+    pass
+
+class IncompleteRead(HTTPException):
+    def __init__(self, partial, expected=None):
+        self.args = partial,
+        self.partial = partial
+        self.expected = expected
+    def __repr__(self):
+        if self.expected is not None:
+            e = ', %i more expected' % self.expected
+        else:
+            e = ''
+        return '%s(%i bytes read%s)' % (self.__class__.__name__,
+                                        len(self.partial), e)
+    __str__ = object.__str__
+
+class ImproperConnectionState(HTTPException):
+    pass
+
+class CannotSendRequest(ImproperConnectionState):
+    pass
+
+class CannotSendHeader(ImproperConnectionState):
+    pass
+
+class ResponseNotReady(ImproperConnectionState):
+    pass
+
+class BadStatusLine(HTTPException):
+    def __init__(self, line):
+        if not line:
+            line = repr(line)
+        self.args = line,
+        self.line = line
+
+class LineTooLong(HTTPException):
+    def __init__(self, line_type):
+        HTTPException.__init__(self, "got more than %d bytes when reading %s"
+                                     % (_MAXLINE, line_type))
+
+class RemoteDisconnected(ConnectionResetError, BadStatusLine):
+    def __init__(self, *pos, **kw):
+        BadStatusLine.__init__(self, "")
+        ConnectionResetError.__init__(self, *pos, **kw)
+
+# for backwards compatibility
+error = HTTPException
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookiejar.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookiejar.py
new file mode 100644
index 0000000000000000000000000000000000000000..68cf16c93cc1c83b5fb54d79a09bde1d18f22578
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookiejar.py
@@ -0,0 +1,2122 @@
+r"""HTTP cookie handling for web clients.
+
+This module has (now fairly distant) origins in Gisle Aas' Perl module
+HTTP::Cookies, from the libwww-perl library.
+
+Docstrings, comments and debug strings in this code refer to the
+attributes of the HTTP cookie system as cookie-attributes, to distinguish
+them clearly from Python attributes.
+
+Class diagram (note that BSDDBCookieJar and the MSIE* classes are not
+distributed with the Python standard library, but are available from
+http://wwwsearch.sf.net/):
+
+                        CookieJar____
+                        /     \      \
+            FileCookieJar      \      \
+             /    |   \         \      \
+ MozillaCookieJar | LWPCookieJar \      \
+                  |               |      \
+                  |   ---MSIEBase |       \
+                  |  /      |     |        \
+                  | /   MSIEDBCookieJar BSDDBCookieJar
+                  |/
+               MSIECookieJar
+
+"""
+
+__all__ = ['Cookie', 'CookieJar', 'CookiePolicy', 'DefaultCookiePolicy',
+           'FileCookieJar', 'LWPCookieJar', 'LoadError', 'MozillaCookieJar']
+
+import os
+import copy
+import datetime
+import re
+import time
+import urllib.parse, urllib.request
+import threading as _threading
+import http.client  # only for the default HTTP port
+from calendar import timegm
+
+debug = False   # set to True to enable debugging via the logging module
+logger = None
+
+def _debug(*args):
+    if not debug:
+        return
+    global logger
+    if not logger:
+        import logging
+        logger = logging.getLogger("http.cookiejar")
+    return logger.debug(*args)
+
+HTTPONLY_ATTR = "HTTPOnly"
+HTTPONLY_PREFIX = "#HttpOnly_"
+DEFAULT_HTTP_PORT = str(http.client.HTTP_PORT)
+NETSCAPE_MAGIC_RGX = re.compile("#( Netscape)? HTTP Cookie File")
+MISSING_FILENAME_TEXT = ("a filename was not supplied (nor was the CookieJar "
+                         "instance initialised with one)")
+NETSCAPE_HEADER_TEXT =  """\
+# Netscape HTTP Cookie File
+# http://curl.haxx.se/rfc/cookie_spec.html
+# This is a generated file!  Do not edit.
+
+"""
+
+def _warn_unhandled_exception():
+    # There are a few catch-all except: statements in this module, for
+    # catching input that's bad in unexpected ways.  Warn if any
+    # exceptions are caught there.
+    import io, warnings, traceback
+    f = io.StringIO()
+    traceback.print_exc(None, f)
+    msg = f.getvalue()
+    warnings.warn("http.cookiejar bug!\n%s" % msg, stacklevel=2)
+
+
+# Date/time conversion
+# -----------------------------------------------------------------------------
+
+EPOCH_YEAR = 1970
+def _timegm(tt):
+    year, month, mday, hour, min, sec = tt[:6]
+    if ((year >= EPOCH_YEAR) and (1 <= month <= 12) and (1 <= mday <= 31) and
+        (0 <= hour <= 24) and (0 <= min <= 59) and (0 <= sec <= 61)):
+        return timegm(tt)
+    else:
+        return None
+
+DAYS = ["Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun"]
+MONTHS = ["Jan", "Feb", "Mar", "Apr", "May", "Jun",
+          "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"]
+MONTHS_LOWER = [month.lower() for month in MONTHS]
+
+def time2isoz(t=None):
+    """Return a string representing time in seconds since epoch, t.
+
+    If the function is called without an argument, it will use the current
+    time.
+
+    The format of the returned string is like "YYYY-MM-DD hh:mm:ssZ",
+    representing Universal Time (UTC, aka GMT).  An example of this format is:
+
+    1994-11-24 08:49:37Z
+
+    """
+    if t is None:
+        dt = datetime.datetime.now(tz=datetime.UTC)
+    else:
+        dt = datetime.datetime.fromtimestamp(t, tz=datetime.UTC)
+    return "%04d-%02d-%02d %02d:%02d:%02dZ" % (
+        dt.year, dt.month, dt.day, dt.hour, dt.minute, dt.second)
+
+def time2netscape(t=None):
+    """Return a string representing time in seconds since epoch, t.
+
+    If the function is called without an argument, it will use the current
+    time.
+
+    The format of the returned string is like this:
+
+    Wed, DD-Mon-YYYY HH:MM:SS GMT
+
+    """
+    if t is None:
+        dt = datetime.datetime.now(tz=datetime.UTC)
+    else:
+        dt = datetime.datetime.fromtimestamp(t, tz=datetime.UTC)
+    return "%s, %02d-%s-%04d %02d:%02d:%02d GMT" % (
+        DAYS[dt.weekday()], dt.day, MONTHS[dt.month-1],
+        dt.year, dt.hour, dt.minute, dt.second)
+
+
+UTC_ZONES = {"GMT": None, "UTC": None, "UT": None, "Z": None}
+
+TIMEZONE_RE = re.compile(r"^([-+])?(\d\d?):?(\d\d)?$", re.ASCII)
+def offset_from_tz_string(tz):
+    offset = None
+    if tz in UTC_ZONES:
+        offset = 0
+    else:
+        m = TIMEZONE_RE.search(tz)
+        if m:
+            offset = 3600 * int(m.group(2))
+            if m.group(3):
+                offset = offset + 60 * int(m.group(3))
+            if m.group(1) == '-':
+                offset = -offset
+    return offset
+
+def _str2time(day, mon, yr, hr, min, sec, tz):
+    yr = int(yr)
+    if yr > datetime.MAXYEAR:
+        return None
+
+    # translate month name to number
+    # month numbers start with 1 (January)
+    try:
+        mon = MONTHS_LOWER.index(mon.lower())+1
+    except ValueError:
+        # maybe it's already a number
+        try:
+            imon = int(mon)
+        except ValueError:
+            return None
+        if 1 <= imon <= 12:
+            mon = imon
+        else:
+            return None
+
+    # make sure clock elements are defined
+    if hr is None: hr = 0
+    if min is None: min = 0
+    if sec is None: sec = 0
+
+    day = int(day)
+    hr = int(hr)
+    min = int(min)
+    sec = int(sec)
+
+    if yr < 1000:
+        # find "obvious" year
+        cur_yr = time.localtime(time.time())[0]
+        m = cur_yr % 100
+        tmp = yr
+        yr = yr + cur_yr - m
+        m = m - tmp
+        if abs(m) > 50:
+            if m > 0: yr = yr + 100
+            else: yr = yr - 100
+
+    # convert UTC time tuple to seconds since epoch (not timezone-adjusted)
+    t = _timegm((yr, mon, day, hr, min, sec, tz))
+
+    if t is not None:
+        # adjust time using timezone string, to get absolute time since epoch
+        if tz is None:
+            tz = "UTC"
+        tz = tz.upper()
+        offset = offset_from_tz_string(tz)
+        if offset is None:
+            return None
+        t = t - offset
+
+    return t
+
+STRICT_DATE_RE = re.compile(
+    r"^[SMTWF][a-z][a-z], (\d\d) ([JFMASOND][a-z][a-z]) "
+    r"(\d\d\d\d) (\d\d):(\d\d):(\d\d) GMT$", re.ASCII)
+WEEKDAY_RE = re.compile(
+    r"^(?:Sun|Mon|Tue|Wed|Thu|Fri|Sat)[a-z]*,?\s*", re.I | re.ASCII)
+LOOSE_HTTP_DATE_RE = re.compile(
+    r"""^
+    (\d\d?)            # day
+       (?:\s+|[-\/])
+    (\w+)              # month
+        (?:\s+|[-\/])
+    (\d+)              # year
+    (?:
+          (?:\s+|:)    # separator before clock
+       (\d\d?):(\d\d)  # hour:min
+       (?::(\d\d))?    # optional seconds
+    )?                 # optional clock
+       \s*
+    (?:
+       ([-+]?\d{2,4}|(?![APap][Mm]\b)[A-Za-z]+) # timezone
+       \s*
+    )?
+    (?:
+       \(\w+\)         # ASCII representation of timezone in parens.
+       \s*
+    )?$""", re.X | re.ASCII)
+def http2time(text):
+    """Returns time in seconds since epoch of time represented by a string.
+
+    Return value is an integer.
+
+    None is returned if the format of str is unrecognized, the time is outside
+    the representable range, or the timezone string is not recognized.  If the
+    string contains no timezone, UTC is assumed.
+
+    The timezone in the string may be numerical (like "-0800" or "+0100") or a
+    string timezone (like "UTC", "GMT", "BST" or "EST").  Currently, only the
+    timezone strings equivalent to UTC (zero offset) are known to the function.
+
+    The function loosely parses the following formats:
+
+    Wed, 09 Feb 1994 22:23:32 GMT       -- HTTP format
+    Tuesday, 08-Feb-94 14:15:29 GMT     -- old rfc850 HTTP format
+    Tuesday, 08-Feb-1994 14:15:29 GMT   -- broken rfc850 HTTP format
+    09 Feb 1994 22:23:32 GMT            -- HTTP format (no weekday)
+    08-Feb-94 14:15:29 GMT              -- rfc850 format (no weekday)
+    08-Feb-1994 14:15:29 GMT            -- broken rfc850 format (no weekday)
+
+    The parser ignores leading and trailing whitespace.  The time may be
+    absent.
+
+    If the year is given with only 2 digits, the function will select the
+    century that makes the year closest to the current date.
+
+    """
+    # fast exit for strictly conforming string
+    m = STRICT_DATE_RE.search(text)
+    if m:
+        g = m.groups()
+        mon = MONTHS_LOWER.index(g[1].lower()) + 1
+        tt = (int(g[2]), mon, int(g[0]),
+              int(g[3]), int(g[4]), float(g[5]))
+        return _timegm(tt)
+
+    # No, we need some messy parsing...
+
+    # clean up
+    text = text.lstrip()
+    text = WEEKDAY_RE.sub("", text, 1)  # Useless weekday
+
+    # tz is time zone specifier string
+    day, mon, yr, hr, min, sec, tz = [None]*7
+
+    # loose regexp parse
+    m = LOOSE_HTTP_DATE_RE.search(text)
+    if m is not None:
+        day, mon, yr, hr, min, sec, tz = m.groups()
+    else:
+        return None  # bad format
+
+    return _str2time(day, mon, yr, hr, min, sec, tz)
+
+ISO_DATE_RE = re.compile(
+    r"""^
+    (\d{4})              # year
+       [-\/]?
+    (\d\d?)              # numerical month
+       [-\/]?
+    (\d\d?)              # day
+   (?:
+         (?:\s+|[-:Tt])  # separator before clock
+      (\d\d?):?(\d\d)    # hour:min
+      (?::?(\d\d(?:\.\d*)?))?  # optional seconds (and fractional)
+   )?                    # optional clock
+      \s*
+   (?:
+      ([-+]?\d\d?:?(:?\d\d)?
+       |Z|z)             # timezone  (Z is "zero meridian", i.e. GMT)
+      \s*
+   )?$""", re.X | re. ASCII)
+def iso2time(text):
+    """
+    As for http2time, but parses the ISO 8601 formats:
+
+    1994-02-03 14:15:29 -0100    -- ISO 8601 format
+    1994-02-03 14:15:29          -- zone is optional
+    1994-02-03                   -- only date
+    1994-02-03T14:15:29          -- Use T as separator
+    19940203T141529Z             -- ISO 8601 compact format
+    19940203                     -- only date
+
+    """
+    # clean up
+    text = text.lstrip()
+
+    # tz is time zone specifier string
+    day, mon, yr, hr, min, sec, tz = [None]*7
+
+    # loose regexp parse
+    m = ISO_DATE_RE.search(text)
+    if m is not None:
+        # XXX there's an extra bit of the timezone I'm ignoring here: is
+        #   this the right thing to do?
+        yr, mon, day, hr, min, sec, tz, _ = m.groups()
+    else:
+        return None  # bad format
+
+    return _str2time(day, mon, yr, hr, min, sec, tz)
+
+
+# Header parsing
+# -----------------------------------------------------------------------------
+
+def unmatched(match):
+    """Return unmatched part of re.Match object."""
+    start, end = match.span(0)
+    return match.string[:start]+match.string[end:]
+
+HEADER_TOKEN_RE =        re.compile(r"^\s*([^=\s;,]+)")
+HEADER_QUOTED_VALUE_RE = re.compile(r"^\s*=\s*\"([^\"\\]*(?:\\.[^\"\\]*)*)\"")
+HEADER_VALUE_RE =        re.compile(r"^\s*=\s*([^\s;,]*)")
+HEADER_ESCAPE_RE = re.compile(r"\\(.)")
+def split_header_words(header_values):
+    r"""Parse header values into a list of lists containing key,value pairs.
+
+    The function knows how to deal with ",", ";" and "=" as well as quoted
+    values after "=".  A list of space separated tokens are parsed as if they
+    were separated by ";".
+
+    If the header_values passed as argument contains multiple values, then they
+    are treated as if they were a single value separated by comma ",".
+
+    This means that this function is useful for parsing header fields that
+    follow this syntax (BNF as from the HTTP/1.1 specification, but we relax
+    the requirement for tokens).
+
+      headers           = #header
+      header            = (token | parameter) *( [";"] (token | parameter))
+
+      token             = 1*<any CHAR except CTLs or separators>
+      separators        = "(" | ")" | "<" | ">" | "@"
+                        | "," | ";" | ":" | "\" | <">
+                        | "/" | "[" | "]" | "?" | "="
+                        | "{" | "}" | SP | HT
+
+      quoted-string     = ( <"> *(qdtext | quoted-pair ) <"> )
+      qdtext            = <any TEXT except <">>
+      quoted-pair       = "\" CHAR
+
+      parameter         = attribute "=" value
+      attribute         = token
+      value             = token | quoted-string
+
+    Each header is represented by a list of key/value pairs.  The value for a
+    simple token (not part of a parameter) is None.  Syntactically incorrect
+    headers will not necessarily be parsed as you would want.
+
+    This is easier to describe with some examples:
+
+    >>> split_header_words(['foo="bar"; port="80,81"; discard, bar=baz'])
+    [[('foo', 'bar'), ('port', '80,81'), ('discard', None)], [('bar', 'baz')]]
+    >>> split_header_words(['text/html; charset="iso-8859-1"'])
+    [[('text/html', None), ('charset', 'iso-8859-1')]]
+    >>> split_header_words([r'Basic realm="\"foo\bar\""'])
+    [[('Basic', None), ('realm', '"foobar"')]]
+
+    """
+    assert not isinstance(header_values, str)
+    result = []
+    for text in header_values:
+        orig_text = text
+        pairs = []
+        while text:
+            m = HEADER_TOKEN_RE.search(text)
+            if m:
+                text = unmatched(m)
+                name = m.group(1)
+                m = HEADER_QUOTED_VALUE_RE.search(text)
+                if m:  # quoted value
+                    text = unmatched(m)
+                    value = m.group(1)
+                    value = HEADER_ESCAPE_RE.sub(r"\1", value)
+                else:
+                    m = HEADER_VALUE_RE.search(text)
+                    if m:  # unquoted value
+                        text = unmatched(m)
+                        value = m.group(1)
+                        value = value.rstrip()
+                    else:
+                        # no value, a lone token
+                        value = None
+                pairs.append((name, value))
+            elif text.lstrip().startswith(","):
+                # concatenated headers, as per RFC 2616 section 4.2
+                text = text.lstrip()[1:]
+                if pairs: result.append(pairs)
+                pairs = []
+            else:
+                # skip junk
+                non_junk, nr_junk_chars = re.subn(r"^[=\s;]*", "", text)
+                assert nr_junk_chars > 0, (
+                    "split_header_words bug: '%s', '%s', %s" %
+                    (orig_text, text, pairs))
+                text = non_junk
+        if pairs: result.append(pairs)
+    return result
+
+HEADER_JOIN_TOKEN_RE = re.compile(r"[!#$%&'*+\-.^_`|~0-9A-Za-z]+")
+HEADER_JOIN_ESCAPE_RE = re.compile(r"([\"\\])")
+def join_header_words(lists):
+    """Do the inverse (almost) of the conversion done by split_header_words.
+
+    Takes a list of lists of (key, value) pairs and produces a single header
+    value.  Attribute values are quoted if needed.
+
+    >>> join_header_words([[("text/plain", None), ("charset", "iso-8859/1")]])
+    'text/plain; charset="iso-8859/1"'
+    >>> join_header_words([[("text/plain", None)], [("charset", "iso-8859/1")]])
+    'text/plain, charset="iso-8859/1"'
+
+    """
+    headers = []
+    for pairs in lists:
+        attr = []
+        for k, v in pairs:
+            if v is not None:
+                if not HEADER_JOIN_TOKEN_RE.fullmatch(v):
+                    v = HEADER_JOIN_ESCAPE_RE.sub(r"\\\1", v)  # escape " and \
+                    v = '"%s"' % v
+                k = "%s=%s" % (k, v)
+            attr.append(k)
+        if attr: headers.append("; ".join(attr))
+    return ", ".join(headers)
+
+def strip_quotes(text):
+    if text.startswith('"'):
+        text = text[1:]
+    if text.endswith('"'):
+        text = text[:-1]
+    return text
+
+def parse_ns_headers(ns_headers):
+    """Ad-hoc parser for Netscape protocol cookie-attributes.
+
+    The old Netscape cookie format for Set-Cookie can for instance contain
+    an unquoted "," in the expires field, so we have to use this ad-hoc
+    parser instead of split_header_words.
+
+    XXX This may not make the best possible effort to parse all the crap
+    that Netscape Cookie headers contain.  Ronald Tschalar's HTTPClient
+    parser is probably better, so could do worse than following that if
+    this ever gives any trouble.
+
+    Currently, this is also used for parsing RFC 2109 cookies.
+
+    """
+    known_attrs = ("expires", "domain", "path", "secure",
+                   # RFC 2109 attrs (may turn up in Netscape cookies, too)
+                   "version", "port", "max-age")
+
+    result = []
+    for ns_header in ns_headers:
+        pairs = []
+        version_set = False
+
+        # XXX: The following does not strictly adhere to RFCs in that empty
+        # names and values are legal (the former will only appear once and will
+        # be overwritten if multiple occurrences are present). This is
+        # mostly to deal with backwards compatibility.
+        for ii, param in enumerate(ns_header.split(';')):
+            param = param.strip()
+
+            key, sep, val = param.partition('=')
+            key = key.strip()
+
+            if not key:
+                if ii == 0:
+                    break
+                else:
+                    continue
+
+            # allow for a distinction between present and empty and missing
+            # altogether
+            val = val.strip() if sep else None
+
+            if ii != 0:
+                lc = key.lower()
+                if lc in known_attrs:
+                    key = lc
+
+                if key == "version":
+                    # This is an RFC 2109 cookie.
+                    if val is not None:
+                        val = strip_quotes(val)
+                    version_set = True
+                elif key == "expires":
+                    # convert expires date to seconds since epoch
+                    if val is not None:
+                        val = http2time(strip_quotes(val))  # None if invalid
+            pairs.append((key, val))
+
+        if pairs:
+            if not version_set:
+                pairs.append(("version", "0"))
+            result.append(pairs)
+
+    return result
+
+
+IPV4_RE = re.compile(r"\.\d+$", re.ASCII)
+def is_HDN(text):
+    """Return True if text is a host domain name."""
+    # XXX
+    # This may well be wrong.  Which RFC is HDN defined in, if any (for
+    #  the purposes of RFC 2965)?
+    # For the current implementation, what about IPv6?  Remember to look
+    #  at other uses of IPV4_RE also, if change this.
+    if IPV4_RE.search(text):
+        return False
+    if text == "":
+        return False
+    if text[0] == "." or text[-1] == ".":
+        return False
+    return True
+
+def domain_match(A, B):
+    """Return True if domain A domain-matches domain B, according to RFC 2965.
+
+    A and B may be host domain names or IP addresses.
+
+    RFC 2965, section 1:
+
+    Host names can be specified either as an IP address or a HDN string.
+    Sometimes we compare one host name with another.  (Such comparisons SHALL
+    be case-insensitive.)  Host A's name domain-matches host B's if
+
+         *  their host name strings string-compare equal; or
+
+         * A is a HDN string and has the form NB, where N is a non-empty
+            name string, B has the form .B', and B' is a HDN string.  (So,
+            x.y.com domain-matches .Y.com but not Y.com.)
+
+    Note that domain-match is not a commutative operation: a.b.c.com
+    domain-matches .c.com, but not the reverse.
+
+    """
+    # Note that, if A or B are IP addresses, the only relevant part of the
+    # definition of the domain-match algorithm is the direct string-compare.
+    A = A.lower()
+    B = B.lower()
+    if A == B:
+        return True
+    if not is_HDN(A):
+        return False
+    i = A.rfind(B)
+    if i == -1 or i == 0:
+        # A does not have form NB, or N is the empty string
+        return False
+    if not B.startswith("."):
+        return False
+    if not is_HDN(B[1:]):
+        return False
+    return True
+
+def liberal_is_HDN(text):
+    """Return True if text is a sort-of-like a host domain name.
+
+    For accepting/blocking domains.
+
+    """
+    if IPV4_RE.search(text):
+        return False
+    return True
+
+def user_domain_match(A, B):
+    """For blocking/accepting domains.
+
+    A and B may be host domain names or IP addresses.
+
+    """
+    A = A.lower()
+    B = B.lower()
+    if not (liberal_is_HDN(A) and liberal_is_HDN(B)):
+        if A == B:
+            # equal IP addresses
+            return True
+        return False
+    initial_dot = B.startswith(".")
+    if initial_dot and A.endswith(B):
+        return True
+    if not initial_dot and A == B:
+        return True
+    return False
+
+cut_port_re = re.compile(r":\d+$", re.ASCII)
+def request_host(request):
+    """Return request-host, as defined by RFC 2965.
+
+    Variation from RFC: returned value is lowercased, for convenient
+    comparison.
+
+    """
+    url = request.get_full_url()
+    host = urllib.parse.urlparse(url)[1]
+    if host == "":
+        host = request.get_header("Host", "")
+
+    # remove port, if present
+    host = cut_port_re.sub("", host, 1)
+    return host.lower()
+
+def eff_request_host(request):
+    """Return a tuple (request-host, effective request-host name).
+
+    As defined by RFC 2965, except both are lowercased.
+
+    """
+    erhn = req_host = request_host(request)
+    if "." not in req_host:
+        erhn = req_host + ".local"
+    return req_host, erhn
+
+def request_path(request):
+    """Path component of request-URI, as defined by RFC 2965."""
+    url = request.get_full_url()
+    parts = urllib.parse.urlsplit(url)
+    path = escape_path(parts.path)
+    if not path.startswith("/"):
+        # fix bad RFC 2396 absoluteURI
+        path = "/" + path
+    return path
+
+def request_port(request):
+    host = request.host
+    i = host.find(':')
+    if i >= 0:
+        port = host[i+1:]
+        try:
+            int(port)
+        except ValueError:
+            _debug("nonnumeric port: '%s'", port)
+            return None
+    else:
+        port = DEFAULT_HTTP_PORT
+    return port
+
+# Characters in addition to A-Z, a-z, 0-9, '_', '.', and '-' that don't
+# need to be escaped to form a valid HTTP URL (RFCs 2396 and 1738).
+HTTP_PATH_SAFE = "%/;:@&=+$,!~*'()"
+ESCAPED_CHAR_RE = re.compile(r"%([0-9a-fA-F][0-9a-fA-F])")
+def uppercase_escaped_char(match):
+    return "%%%s" % match.group(1).upper()
+def escape_path(path):
+    """Escape any invalid characters in HTTP URL, and uppercase all escapes."""
+    # There's no knowing what character encoding was used to create URLs
+    # containing %-escapes, but since we have to pick one to escape invalid
+    # path characters, we pick UTF-8, as recommended in the HTML 4.0
+    # specification:
+    # http://www.w3.org/TR/REC-html40/appendix/notes.html#h-B.2.1
+    # And here, kind of: draft-fielding-uri-rfc2396bis-03
+    # (And in draft IRI specification: draft-duerst-iri-05)
+    # (And here, for new URI schemes: RFC 2718)
+    path = urllib.parse.quote(path, HTTP_PATH_SAFE)
+    path = ESCAPED_CHAR_RE.sub(uppercase_escaped_char, path)
+    return path
+
+def reach(h):
+    """Return reach of host h, as defined by RFC 2965, section 1.
+
+    The reach R of a host name H is defined as follows:
+
+       *  If
+
+          -  H is the host domain name of a host; and,
+
+          -  H has the form A.B; and
+
+          -  A has no embedded (that is, interior) dots; and
+
+          -  B has at least one embedded dot, or B is the string "local".
+             then the reach of H is .B.
+
+       *  Otherwise, the reach of H is H.
+
+    >>> reach("www.acme.com")
+    '.acme.com'
+    >>> reach("acme.com")
+    'acme.com'
+    >>> reach("acme.local")
+    '.local'
+
+    """
+    i = h.find(".")
+    if i >= 0:
+        #a = h[:i]  # this line is only here to show what a is
+        b = h[i+1:]
+        i = b.find(".")
+        if is_HDN(h) and (i >= 0 or b == "local"):
+            return "."+b
+    return h
+
+def is_third_party(request):
+    """
+
+    RFC 2965, section 3.3.6:
+
+        An unverifiable transaction is to a third-party host if its request-
+        host U does not domain-match the reach R of the request-host O in the
+        origin transaction.
+
+    """
+    req_host = request_host(request)
+    if not domain_match(req_host, reach(request.origin_req_host)):
+        return True
+    else:
+        return False
+
+
+class Cookie:
+    """HTTP Cookie.
+
+    This class represents both Netscape and RFC 2965 cookies.
+
+    This is deliberately a very simple class.  It just holds attributes.  It's
+    possible to construct Cookie instances that don't comply with the cookie
+    standards.  CookieJar.make_cookies is the factory function for Cookie
+    objects -- it deals with cookie parsing, supplying defaults, and
+    normalising to the representation used in this class.  CookiePolicy is
+    responsible for checking them to see whether they should be accepted from
+    and returned to the server.
+
+    Note that the port may be present in the headers, but unspecified ("Port"
+    rather than"Port=80", for example); if this is the case, port is None.
+
+    """
+
+    def __init__(self, version, name, value,
+                 port, port_specified,
+                 domain, domain_specified, domain_initial_dot,
+                 path, path_specified,
+                 secure,
+                 expires,
+                 discard,
+                 comment,
+                 comment_url,
+                 rest,
+                 rfc2109=False,
+                 ):
+
+        if version is not None: version = int(version)
+        if expires is not None: expires = int(float(expires))
+        if port is None and port_specified is True:
+            raise ValueError("if port is None, port_specified must be false")
+
+        self.version = version
+        self.name = name
+        self.value = value
+        self.port = port
+        self.port_specified = port_specified
+        # normalise case, as per RFC 2965 section 3.3.3
+        self.domain = domain.lower()
+        self.domain_specified = domain_specified
+        # Sigh.  We need to know whether the domain given in the
+        # cookie-attribute had an initial dot, in order to follow RFC 2965
+        # (as clarified in draft errata).  Needed for the returned $Domain
+        # value.
+        self.domain_initial_dot = domain_initial_dot
+        self.path = path
+        self.path_specified = path_specified
+        self.secure = secure
+        self.expires = expires
+        self.discard = discard
+        self.comment = comment
+        self.comment_url = comment_url
+        self.rfc2109 = rfc2109
+
+        self._rest = copy.copy(rest)
+
+    def has_nonstandard_attr(self, name):
+        return name in self._rest
+    def get_nonstandard_attr(self, name, default=None):
+        return self._rest.get(name, default)
+    def set_nonstandard_attr(self, name, value):
+        self._rest[name] = value
+
+    def is_expired(self, now=None):
+        if now is None: now = time.time()
+        if (self.expires is not None) and (self.expires <= now):
+            return True
+        return False
+
+    def __str__(self):
+        if self.port is None: p = ""
+        else: p = ":"+self.port
+        limit = self.domain + p + self.path
+        if self.value is not None:
+            namevalue = "%s=%s" % (self.name, self.value)
+        else:
+            namevalue = self.name
+        return "<Cookie %s for %s>" % (namevalue, limit)
+
+    def __repr__(self):
+        args = []
+        for name in ("version", "name", "value",
+                     "port", "port_specified",
+                     "domain", "domain_specified", "domain_initial_dot",
+                     "path", "path_specified",
+                     "secure", "expires", "discard", "comment", "comment_url",
+                     ):
+            attr = getattr(self, name)
+            args.append("%s=%s" % (name, repr(attr)))
+        args.append("rest=%s" % repr(self._rest))
+        args.append("rfc2109=%s" % repr(self.rfc2109))
+        return "%s(%s)" % (self.__class__.__name__, ", ".join(args))
+
+
+class CookiePolicy:
+    """Defines which cookies get accepted from and returned to server.
+
+    May also modify cookies, though this is probably a bad idea.
+
+    The subclass DefaultCookiePolicy defines the standard rules for Netscape
+    and RFC 2965 cookies -- override that if you want a customized policy.
+
+    """
+    def set_ok(self, cookie, request):
+        """Return true if (and only if) cookie should be accepted from server.
+
+        Currently, pre-expired cookies never get this far -- the CookieJar
+        class deletes such cookies itself.
+
+        """
+        raise NotImplementedError()
+
+    def return_ok(self, cookie, request):
+        """Return true if (and only if) cookie should be returned to server."""
+        raise NotImplementedError()
+
+    def domain_return_ok(self, domain, request):
+        """Return false if cookies should not be returned, given cookie domain.
+        """
+        return True
+
+    def path_return_ok(self, path, request):
+        """Return false if cookies should not be returned, given cookie path.
+        """
+        return True
+
+
+class DefaultCookiePolicy(CookiePolicy):
+    """Implements the standard rules for accepting and returning cookies."""
+
+    DomainStrictNoDots = 1
+    DomainStrictNonDomain = 2
+    DomainRFC2965Match = 4
+
+    DomainLiberal = 0
+    DomainStrict = DomainStrictNoDots|DomainStrictNonDomain
+
+    def __init__(self,
+                 blocked_domains=None, allowed_domains=None,
+                 netscape=True, rfc2965=False,
+                 rfc2109_as_netscape=None,
+                 hide_cookie2=False,
+                 strict_domain=False,
+                 strict_rfc2965_unverifiable=True,
+                 strict_ns_unverifiable=False,
+                 strict_ns_domain=DomainLiberal,
+                 strict_ns_set_initial_dollar=False,
+                 strict_ns_set_path=False,
+                 secure_protocols=("https", "wss")
+                 ):
+        """Constructor arguments should be passed as keyword arguments only."""
+        self.netscape = netscape
+        self.rfc2965 = rfc2965
+        self.rfc2109_as_netscape = rfc2109_as_netscape
+        self.hide_cookie2 = hide_cookie2
+        self.strict_domain = strict_domain
+        self.strict_rfc2965_unverifiable = strict_rfc2965_unverifiable
+        self.strict_ns_unverifiable = strict_ns_unverifiable
+        self.strict_ns_domain = strict_ns_domain
+        self.strict_ns_set_initial_dollar = strict_ns_set_initial_dollar
+        self.strict_ns_set_path = strict_ns_set_path
+        self.secure_protocols = secure_protocols
+
+        if blocked_domains is not None:
+            self._blocked_domains = tuple(blocked_domains)
+        else:
+            self._blocked_domains = ()
+
+        if allowed_domains is not None:
+            allowed_domains = tuple(allowed_domains)
+        self._allowed_domains = allowed_domains
+
+    def blocked_domains(self):
+        """Return the sequence of blocked domains (as a tuple)."""
+        return self._blocked_domains
+    def set_blocked_domains(self, blocked_domains):
+        """Set the sequence of blocked domains."""
+        self._blocked_domains = tuple(blocked_domains)
+
+    def is_blocked(self, domain):
+        for blocked_domain in self._blocked_domains:
+            if user_domain_match(domain, blocked_domain):
+                return True
+        return False
+
+    def allowed_domains(self):
+        """Return None, or the sequence of allowed domains (as a tuple)."""
+        return self._allowed_domains
+    def set_allowed_domains(self, allowed_domains):
+        """Set the sequence of allowed domains, or None."""
+        if allowed_domains is not None:
+            allowed_domains = tuple(allowed_domains)
+        self._allowed_domains = allowed_domains
+
+    def is_not_allowed(self, domain):
+        if self._allowed_domains is None:
+            return False
+        for allowed_domain in self._allowed_domains:
+            if user_domain_match(domain, allowed_domain):
+                return False
+        return True
+
+    def set_ok(self, cookie, request):
+        """
+        If you override .set_ok(), be sure to call this method.  If it returns
+        false, so should your subclass (assuming your subclass wants to be more
+        strict about which cookies to accept).
+
+        """
+        _debug(" - checking cookie %s=%s", cookie.name, cookie.value)
+
+        assert cookie.name is not None
+
+        for n in "version", "verifiability", "name", "path", "domain", "port":
+            fn_name = "set_ok_"+n
+            fn = getattr(self, fn_name)
+            if not fn(cookie, request):
+                return False
+
+        return True
+
+    def set_ok_version(self, cookie, request):
+        if cookie.version is None:
+            # Version is always set to 0 by parse_ns_headers if it's a Netscape
+            # cookie, so this must be an invalid RFC 2965 cookie.
+            _debug("   Set-Cookie2 without version attribute (%s=%s)",
+                   cookie.name, cookie.value)
+            return False
+        if cookie.version > 0 and not self.rfc2965:
+            _debug("   RFC 2965 cookies are switched off")
+            return False
+        elif cookie.version == 0 and not self.netscape:
+            _debug("   Netscape cookies are switched off")
+            return False
+        return True
+
+    def set_ok_verifiability(self, cookie, request):
+        if request.unverifiable and is_third_party(request):
+            if cookie.version > 0 and self.strict_rfc2965_unverifiable:
+                _debug("   third-party RFC 2965 cookie during "
+                             "unverifiable transaction")
+                return False
+            elif cookie.version == 0 and self.strict_ns_unverifiable:
+                _debug("   third-party Netscape cookie during "
+                             "unverifiable transaction")
+                return False
+        return True
+
+    def set_ok_name(self, cookie, request):
+        # Try and stop servers setting V0 cookies designed to hack other
+        # servers that know both V0 and V1 protocols.
+        if (cookie.version == 0 and self.strict_ns_set_initial_dollar and
+            cookie.name.startswith("$")):
+            _debug("   illegal name (starts with '$'): '%s'", cookie.name)
+            return False
+        return True
+
+    def set_ok_path(self, cookie, request):
+        if cookie.path_specified:
+            req_path = request_path(request)
+            if ((cookie.version > 0 or
+                 (cookie.version == 0 and self.strict_ns_set_path)) and
+                not self.path_return_ok(cookie.path, request)):
+                _debug("   path attribute %s is not a prefix of request "
+                       "path %s", cookie.path, req_path)
+                return False
+        return True
+
+    def set_ok_domain(self, cookie, request):
+        if self.is_blocked(cookie.domain):
+            _debug("   domain %s is in user block-list", cookie.domain)
+            return False
+        if self.is_not_allowed(cookie.domain):
+            _debug("   domain %s is not in user allow-list", cookie.domain)
+            return False
+        if cookie.domain_specified:
+            req_host, erhn = eff_request_host(request)
+            domain = cookie.domain
+            if self.strict_domain and (domain.count(".") >= 2):
+                # XXX This should probably be compared with the Konqueror
+                # (kcookiejar.cpp) and Mozilla implementations, but it's a
+                # losing battle.
+                i = domain.rfind(".")
+                j = domain.rfind(".", 0, i)
+                if j == 0:  # domain like .foo.bar
+                    tld = domain[i+1:]
+                    sld = domain[j+1:i]
+                    if sld.lower() in ("co", "ac", "com", "edu", "org", "net",
+                       "gov", "mil", "int", "aero", "biz", "cat", "coop",
+                       "info", "jobs", "mobi", "museum", "name", "pro",
+                       "travel", "eu") and len(tld) == 2:
+                        # domain like .co.uk
+                        _debug("   country-code second level domain %s", domain)
+                        return False
+            if domain.startswith("."):
+                undotted_domain = domain[1:]
+            else:
+                undotted_domain = domain
+            embedded_dots = (undotted_domain.find(".") >= 0)
+            if not embedded_dots and not erhn.endswith(".local"):
+                _debug("   non-local domain %s contains no embedded dot",
+                       domain)
+                return False
+            if cookie.version == 0:
+                if (not (erhn.endswith(domain) or
+                         erhn.endswith(f"{undotted_domain}.local")) and
+                    (not erhn.startswith(".") and
+                     not ("."+erhn).endswith(domain))):
+                    _debug("   effective request-host %s (even with added "
+                           "initial dot) does not end with %s",
+                           erhn, domain)
+                    return False
+            if (cookie.version > 0 or
+                (self.strict_ns_domain & self.DomainRFC2965Match)):
+                if not domain_match(erhn, domain):
+                    _debug("   effective request-host %s does not domain-match "
+                           "%s", erhn, domain)
+                    return False
+            if (cookie.version > 0 or
+                (self.strict_ns_domain & self.DomainStrictNoDots)):
+                host_prefix = req_host[:-len(domain)]
+                if (host_prefix.find(".") >= 0 and
+                    not IPV4_RE.search(req_host)):
+                    _debug("   host prefix %s for domain %s contains a dot",
+                           host_prefix, domain)
+                    return False
+        return True
+
+    def set_ok_port(self, cookie, request):
+        if cookie.port_specified:
+            req_port = request_port(request)
+            if req_port is None:
+                req_port = "80"
+            else:
+                req_port = str(req_port)
+            for p in cookie.port.split(","):
+                try:
+                    int(p)
+                except ValueError:
+                    _debug("   bad port %s (not numeric)", p)
+                    return False
+                if p == req_port:
+                    break
+            else:
+                _debug("   request port (%s) not found in %s",
+                       req_port, cookie.port)
+                return False
+        return True
+
+    def return_ok(self, cookie, request):
+        """
+        If you override .return_ok(), be sure to call this method.  If it
+        returns false, so should your subclass (assuming your subclass wants to
+        be more strict about which cookies to return).
+
+        """
+        # Path has already been checked by .path_return_ok(), and domain
+        # blocking done by .domain_return_ok().
+        _debug(" - checking cookie %s=%s", cookie.name, cookie.value)
+
+        for n in "version", "verifiability", "secure", "expires", "port", "domain":
+            fn_name = "return_ok_"+n
+            fn = getattr(self, fn_name)
+            if not fn(cookie, request):
+                return False
+        return True
+
+    def return_ok_version(self, cookie, request):
+        if cookie.version > 0 and not self.rfc2965:
+            _debug("   RFC 2965 cookies are switched off")
+            return False
+        elif cookie.version == 0 and not self.netscape:
+            _debug("   Netscape cookies are switched off")
+            return False
+        return True
+
+    def return_ok_verifiability(self, cookie, request):
+        if request.unverifiable and is_third_party(request):
+            if cookie.version > 0 and self.strict_rfc2965_unverifiable:
+                _debug("   third-party RFC 2965 cookie during unverifiable "
+                       "transaction")
+                return False
+            elif cookie.version == 0 and self.strict_ns_unverifiable:
+                _debug("   third-party Netscape cookie during unverifiable "
+                       "transaction")
+                return False
+        return True
+
+    def return_ok_secure(self, cookie, request):
+        if cookie.secure and request.type not in self.secure_protocols:
+            _debug("   secure cookie with non-secure request")
+            return False
+        return True
+
+    def return_ok_expires(self, cookie, request):
+        if cookie.is_expired(self._now):
+            _debug("   cookie expired")
+            return False
+        return True
+
+    def return_ok_port(self, cookie, request):
+        if cookie.port:
+            req_port = request_port(request)
+            if req_port is None:
+                req_port = "80"
+            for p in cookie.port.split(","):
+                if p == req_port:
+                    break
+            else:
+                _debug("   request port %s does not match cookie port %s",
+                       req_port, cookie.port)
+                return False
+        return True
+
+    def return_ok_domain(self, cookie, request):
+        req_host, erhn = eff_request_host(request)
+        domain = cookie.domain
+
+        if domain and not domain.startswith("."):
+            dotdomain = "." + domain
+        else:
+            dotdomain = domain
+
+        # strict check of non-domain cookies: Mozilla does this, MSIE5 doesn't
+        if (cookie.version == 0 and
+            (self.strict_ns_domain & self.DomainStrictNonDomain) and
+            not cookie.domain_specified and domain != erhn):
+            _debug("   cookie with unspecified domain does not string-compare "
+                   "equal to request domain")
+            return False
+
+        if cookie.version > 0 and not domain_match(erhn, domain):
+            _debug("   effective request-host name %s does not domain-match "
+                   "RFC 2965 cookie domain %s", erhn, domain)
+            return False
+        if cookie.version == 0 and not ("."+erhn).endswith(dotdomain):
+            _debug("   request-host %s does not match Netscape cookie domain "
+                   "%s", req_host, domain)
+            return False
+        return True
+
+    def domain_return_ok(self, domain, request):
+        # Liberal check of.  This is here as an optimization to avoid
+        # having to load lots of MSIE cookie files unless necessary.
+        req_host, erhn = eff_request_host(request)
+        if not req_host.startswith("."):
+            req_host = "."+req_host
+        if not erhn.startswith("."):
+            erhn = "."+erhn
+        if domain and not domain.startswith("."):
+            dotdomain = "." + domain
+        else:
+            dotdomain = domain
+        if not (req_host.endswith(dotdomain) or erhn.endswith(dotdomain)):
+            #_debug("   request domain %s does not match cookie domain %s",
+            #       req_host, domain)
+            return False
+
+        if self.is_blocked(domain):
+            _debug("   domain %s is in user block-list", domain)
+            return False
+        if self.is_not_allowed(domain):
+            _debug("   domain %s is not in user allow-list", domain)
+            return False
+
+        return True
+
+    def path_return_ok(self, path, request):
+        _debug("- checking cookie path=%s", path)
+        req_path = request_path(request)
+        pathlen = len(path)
+        if req_path == path:
+            return True
+        elif (req_path.startswith(path) and
+              (path.endswith("/") or req_path[pathlen:pathlen+1] == "/")):
+            return True
+
+        _debug("  %s does not path-match %s", req_path, path)
+        return False
+
+def deepvalues(mapping):
+    """Iterates over nested mapping, depth-first"""
+    for obj in list(mapping.values()):
+        mapping = False
+        try:
+            obj.items
+        except AttributeError:
+            pass
+        else:
+            mapping = True
+            yield from deepvalues(obj)
+        if not mapping:
+            yield obj
+
+
+# Used as second parameter to dict.get() method, to distinguish absent
+# dict key from one with a None value.
+class Absent: pass
+
+class CookieJar:
+    """Collection of HTTP cookies.
+
+    You may not need to know about this class: try
+    urllib.request.build_opener(HTTPCookieProcessor).open(url).
+    """
+
+    non_word_re = re.compile(r"\W")
+    quote_re = re.compile(r"([\"\\])")
+    strict_domain_re = re.compile(r"\.?[^.]*")
+    domain_re = re.compile(r"[^.]*")
+    dots_re = re.compile(r"^\.+")
+
+    magic_re = re.compile(r"^\#LWP-Cookies-(\d+\.\d+)", re.ASCII)
+
+    def __init__(self, policy=None):
+        if policy is None:
+            policy = DefaultCookiePolicy()
+        self._policy = policy
+
+        self._cookies_lock = _threading.RLock()
+        self._cookies = {}
+
+    def set_policy(self, policy):
+        self._policy = policy
+
+    def _cookies_for_domain(self, domain, request):
+        cookies = []
+        if not self._policy.domain_return_ok(domain, request):
+            return []
+        _debug("Checking %s for cookies to return", domain)
+        cookies_by_path = self._cookies[domain]
+        for path in cookies_by_path.keys():
+            if not self._policy.path_return_ok(path, request):
+                continue
+            cookies_by_name = cookies_by_path[path]
+            for cookie in cookies_by_name.values():
+                if not self._policy.return_ok(cookie, request):
+                    _debug("   not returning cookie")
+                    continue
+                _debug("   it's a match")
+                cookies.append(cookie)
+        return cookies
+
+    def _cookies_for_request(self, request):
+        """Return a list of cookies to be returned to server."""
+        cookies = []
+        for domain in self._cookies.keys():
+            cookies.extend(self._cookies_for_domain(domain, request))
+        return cookies
+
+    def _cookie_attrs(self, cookies):
+        """Return a list of cookie-attributes to be returned to server.
+
+        like ['foo="bar"; $Path="/"', ...]
+
+        The $Version attribute is also added when appropriate (currently only
+        once per request).
+
+        """
+        # add cookies in order of most specific (ie. longest) path first
+        cookies.sort(key=lambda a: len(a.path), reverse=True)
+
+        version_set = False
+
+        attrs = []
+        for cookie in cookies:
+            # set version of Cookie header
+            # XXX
+            # What should it be if multiple matching Set-Cookie headers have
+            #  different versions themselves?
+            # Answer: there is no answer; was supposed to be settled by
+            #  RFC 2965 errata, but that may never appear...
+            version = cookie.version
+            if not version_set:
+                version_set = True
+                if version > 0:
+                    attrs.append("$Version=%s" % version)
+
+            # quote cookie value if necessary
+            # (not for Netscape protocol, which already has any quotes
+            #  intact, due to the poorly-specified Netscape Cookie: syntax)
+            if ((cookie.value is not None) and
+                self.non_word_re.search(cookie.value) and version > 0):
+                value = self.quote_re.sub(r"\\\1", cookie.value)
+            else:
+                value = cookie.value
+
+            # add cookie-attributes to be returned in Cookie header
+            if cookie.value is None:
+                attrs.append(cookie.name)
+            else:
+                attrs.append("%s=%s" % (cookie.name, value))
+            if version > 0:
+                if cookie.path_specified:
+                    attrs.append('$Path="%s"' % cookie.path)
+                if cookie.domain.startswith("."):
+                    domain = cookie.domain
+                    if (not cookie.domain_initial_dot and
+                        domain.startswith(".")):
+                        domain = domain[1:]
+                    attrs.append('$Domain="%s"' % domain)
+                if cookie.port is not None:
+                    p = "$Port"
+                    if cookie.port_specified:
+                        p = p + ('="%s"' % cookie.port)
+                    attrs.append(p)
+
+        return attrs
+
+    def add_cookie_header(self, request):
+        """Add correct Cookie: header to request (urllib.request.Request object).
+
+        The Cookie2 header is also added unless policy.hide_cookie2 is true.
+
+        """
+        _debug("add_cookie_header")
+        self._cookies_lock.acquire()
+        try:
+
+            self._policy._now = self._now = int(time.time())
+
+            cookies = self._cookies_for_request(request)
+
+            attrs = self._cookie_attrs(cookies)
+            if attrs:
+                if not request.has_header("Cookie"):
+                    request.add_unredirected_header(
+                        "Cookie", "; ".join(attrs))
+
+            # if necessary, advertise that we know RFC 2965
+            if (self._policy.rfc2965 and not self._policy.hide_cookie2 and
+                not request.has_header("Cookie2")):
+                for cookie in cookies:
+                    if cookie.version != 1:
+                        request.add_unredirected_header("Cookie2", '$Version="1"')
+                        break
+
+        finally:
+            self._cookies_lock.release()
+
+        self.clear_expired_cookies()
+
+    def _normalized_cookie_tuples(self, attrs_set):
+        """Return list of tuples containing normalised cookie information.
+
+        attrs_set is the list of lists of key,value pairs extracted from
+        the Set-Cookie or Set-Cookie2 headers.
+
+        Tuples are name, value, standard, rest, where name and value are the
+        cookie name and value, standard is a dictionary containing the standard
+        cookie-attributes (discard, secure, version, expires or max-age,
+        domain, path and port) and rest is a dictionary containing the rest of
+        the cookie-attributes.
+
+        """
+        cookie_tuples = []
+
+        boolean_attrs = "discard", "secure"
+        value_attrs = ("version",
+                       "expires", "max-age",
+                       "domain", "path", "port",
+                       "comment", "commenturl")
+
+        for cookie_attrs in attrs_set:
+            name, value = cookie_attrs[0]
+
+            # Build dictionary of standard cookie-attributes (standard) and
+            # dictionary of other cookie-attributes (rest).
+
+            # Note: expiry time is normalised to seconds since epoch.  V0
+            # cookies should have the Expires cookie-attribute, and V1 cookies
+            # should have Max-Age, but since V1 includes RFC 2109 cookies (and
+            # since V0 cookies may be a mish-mash of Netscape and RFC 2109), we
+            # accept either (but prefer Max-Age).
+            max_age_set = False
+
+            bad_cookie = False
+
+            standard = {}
+            rest = {}
+            for k, v in cookie_attrs[1:]:
+                lc = k.lower()
+                # don't lose case distinction for unknown fields
+                if lc in value_attrs or lc in boolean_attrs:
+                    k = lc
+                if k in boolean_attrs and v is None:
+                    # boolean cookie-attribute is present, but has no value
+                    # (like "discard", rather than "port=80")
+                    v = True
+                if k in standard:
+                    # only first value is significant
+                    continue
+                if k == "domain":
+                    if v is None:
+                        _debug("   missing value for domain attribute")
+                        bad_cookie = True
+                        break
+                    # RFC 2965 section 3.3.3
+                    v = v.lower()
+                if k == "expires":
+                    if max_age_set:
+                        # Prefer max-age to expires (like Mozilla)
+                        continue
+                    if v is None:
+                        _debug("   missing or invalid value for expires "
+                              "attribute: treating as session cookie")
+                        continue
+                if k == "max-age":
+                    max_age_set = True
+                    try:
+                        v = int(v)
+                    except ValueError:
+                        _debug("   missing or invalid (non-numeric) value for "
+                              "max-age attribute")
+                        bad_cookie = True
+                        break
+                    # convert RFC 2965 Max-Age to seconds since epoch
+                    # XXX Strictly you're supposed to follow RFC 2616
+                    #   age-calculation rules.  Remember that zero Max-Age
+                    #   is a request to discard (old and new) cookie, though.
+                    k = "expires"
+                    v = self._now + v
+                if (k in value_attrs) or (k in boolean_attrs):
+                    if (v is None and
+                        k not in ("port", "comment", "commenturl")):
+                        _debug("   missing value for %s attribute" % k)
+                        bad_cookie = True
+                        break
+                    standard[k] = v
+                else:
+                    rest[k] = v
+
+            if bad_cookie:
+                continue
+
+            cookie_tuples.append((name, value, standard, rest))
+
+        return cookie_tuples
+
+    def _cookie_from_cookie_tuple(self, tup, request):
+        # standard is dict of standard cookie-attributes, rest is dict of the
+        # rest of them
+        name, value, standard, rest = tup
+
+        domain = standard.get("domain", Absent)
+        path = standard.get("path", Absent)
+        port = standard.get("port", Absent)
+        expires = standard.get("expires", Absent)
+
+        # set the easy defaults
+        version = standard.get("version", None)
+        if version is not None:
+            try:
+                version = int(version)
+            except ValueError:
+                return None  # invalid version, ignore cookie
+        secure = standard.get("secure", False)
+        # (discard is also set if expires is Absent)
+        discard = standard.get("discard", False)
+        comment = standard.get("comment", None)
+        comment_url = standard.get("commenturl", None)
+
+        # set default path
+        if path is not Absent and path != "":
+            path_specified = True
+            path = escape_path(path)
+        else:
+            path_specified = False
+            path = request_path(request)
+            i = path.rfind("/")
+            if i != -1:
+                if version == 0:
+                    # Netscape spec parts company from reality here
+                    path = path[:i]
+                else:
+                    path = path[:i+1]
+            if len(path) == 0: path = "/"
+
+        # set default domain
+        domain_specified = domain is not Absent
+        # but first we have to remember whether it starts with a dot
+        domain_initial_dot = False
+        if domain_specified:
+            domain_initial_dot = bool(domain.startswith("."))
+        if domain is Absent:
+            req_host, erhn = eff_request_host(request)
+            domain = erhn
+        elif not domain.startswith("."):
+            domain = "."+domain
+
+        # set default port
+        port_specified = False
+        if port is not Absent:
+            if port is None:
+                # Port attr present, but has no value: default to request port.
+                # Cookie should then only be sent back on that port.
+                port = request_port(request)
+            else:
+                port_specified = True
+                port = re.sub(r"\s+", "", port)
+        else:
+            # No port attr present.  Cookie can be sent back on any port.
+            port = None
+
+        # set default expires and discard
+        if expires is Absent:
+            expires = None
+            discard = True
+        elif expires <= self._now:
+            # Expiry date in past is request to delete cookie.  This can't be
+            # in DefaultCookiePolicy, because can't delete cookies there.
+            try:
+                self.clear(domain, path, name)
+            except KeyError:
+                pass
+            _debug("Expiring cookie, domain='%s', path='%s', name='%s'",
+                   domain, path, name)
+            return None
+
+        return Cookie(version,
+                      name, value,
+                      port, port_specified,
+                      domain, domain_specified, domain_initial_dot,
+                      path, path_specified,
+                      secure,
+                      expires,
+                      discard,
+                      comment,
+                      comment_url,
+                      rest)
+
+    def _cookies_from_attrs_set(self, attrs_set, request):
+        cookie_tuples = self._normalized_cookie_tuples(attrs_set)
+
+        cookies = []
+        for tup in cookie_tuples:
+            cookie = self._cookie_from_cookie_tuple(tup, request)
+            if cookie: cookies.append(cookie)
+        return cookies
+
+    def _process_rfc2109_cookies(self, cookies):
+        rfc2109_as_ns = getattr(self._policy, 'rfc2109_as_netscape', None)
+        if rfc2109_as_ns is None:
+            rfc2109_as_ns = not self._policy.rfc2965
+        for cookie in cookies:
+            if cookie.version == 1:
+                cookie.rfc2109 = True
+                if rfc2109_as_ns:
+                    # treat 2109 cookies as Netscape cookies rather than
+                    # as RFC2965 cookies
+                    cookie.version = 0
+
+    def make_cookies(self, response, request):
+        """Return sequence of Cookie objects extracted from response object."""
+        # get cookie-attributes for RFC 2965 and Netscape protocols
+        headers = response.info()
+        rfc2965_hdrs = headers.get_all("Set-Cookie2", [])
+        ns_hdrs = headers.get_all("Set-Cookie", [])
+        self._policy._now = self._now = int(time.time())
+
+        rfc2965 = self._policy.rfc2965
+        netscape = self._policy.netscape
+
+        if ((not rfc2965_hdrs and not ns_hdrs) or
+            (not ns_hdrs and not rfc2965) or
+            (not rfc2965_hdrs and not netscape) or
+            (not netscape and not rfc2965)):
+            return []  # no relevant cookie headers: quick exit
+
+        try:
+            cookies = self._cookies_from_attrs_set(
+                split_header_words(rfc2965_hdrs), request)
+        except Exception:
+            _warn_unhandled_exception()
+            cookies = []
+
+        if ns_hdrs and netscape:
+            try:
+                # RFC 2109 and Netscape cookies
+                ns_cookies = self._cookies_from_attrs_set(
+                    parse_ns_headers(ns_hdrs), request)
+            except Exception:
+                _warn_unhandled_exception()
+                ns_cookies = []
+            self._process_rfc2109_cookies(ns_cookies)
+
+            # Look for Netscape cookies (from Set-Cookie headers) that match
+            # corresponding RFC 2965 cookies (from Set-Cookie2 headers).
+            # For each match, keep the RFC 2965 cookie and ignore the Netscape
+            # cookie (RFC 2965 section 9.1).  Actually, RFC 2109 cookies are
+            # bundled in with the Netscape cookies for this purpose, which is
+            # reasonable behaviour.
+            if rfc2965:
+                lookup = {}
+                for cookie in cookies:
+                    lookup[(cookie.domain, cookie.path, cookie.name)] = None
+
+                def no_matching_rfc2965(ns_cookie, lookup=lookup):
+                    key = ns_cookie.domain, ns_cookie.path, ns_cookie.name
+                    return key not in lookup
+                ns_cookies = filter(no_matching_rfc2965, ns_cookies)
+
+            if ns_cookies:
+                cookies.extend(ns_cookies)
+
+        return cookies
+
+    def set_cookie_if_ok(self, cookie, request):
+        """Set a cookie if policy says it's OK to do so."""
+        self._cookies_lock.acquire()
+        try:
+            self._policy._now = self._now = int(time.time())
+
+            if self._policy.set_ok(cookie, request):
+                self.set_cookie(cookie)
+
+
+        finally:
+            self._cookies_lock.release()
+
+    def set_cookie(self, cookie):
+        """Set a cookie, without checking whether or not it should be set."""
+        c = self._cookies
+        self._cookies_lock.acquire()
+        try:
+            if cookie.domain not in c: c[cookie.domain] = {}
+            c2 = c[cookie.domain]
+            if cookie.path not in c2: c2[cookie.path] = {}
+            c3 = c2[cookie.path]
+            c3[cookie.name] = cookie
+        finally:
+            self._cookies_lock.release()
+
+    def extract_cookies(self, response, request):
+        """Extract cookies from response, where allowable given the request."""
+        _debug("extract_cookies: %s", response.info())
+        self._cookies_lock.acquire()
+        try:
+            for cookie in self.make_cookies(response, request):
+                if self._policy.set_ok(cookie, request):
+                    _debug(" setting cookie: %s", cookie)
+                    self.set_cookie(cookie)
+        finally:
+            self._cookies_lock.release()
+
+    def clear(self, domain=None, path=None, name=None):
+        """Clear some cookies.
+
+        Invoking this method without arguments will clear all cookies.  If
+        given a single argument, only cookies belonging to that domain will be
+        removed.  If given two arguments, cookies belonging to the specified
+        path within that domain are removed.  If given three arguments, then
+        the cookie with the specified name, path and domain is removed.
+
+        Raises KeyError if no matching cookie exists.
+
+        """
+        if name is not None:
+            if (domain is None) or (path is None):
+                raise ValueError(
+                    "domain and path must be given to remove a cookie by name")
+            del self._cookies[domain][path][name]
+        elif path is not None:
+            if domain is None:
+                raise ValueError(
+                    "domain must be given to remove cookies by path")
+            del self._cookies[domain][path]
+        elif domain is not None:
+            del self._cookies[domain]
+        else:
+            self._cookies = {}
+
+    def clear_session_cookies(self):
+        """Discard all session cookies.
+
+        Note that the .save() method won't save session cookies anyway, unless
+        you ask otherwise by passing a true ignore_discard argument.
+
+        """
+        self._cookies_lock.acquire()
+        try:
+            for cookie in self:
+                if cookie.discard:
+                    self.clear(cookie.domain, cookie.path, cookie.name)
+        finally:
+            self._cookies_lock.release()
+
+    def clear_expired_cookies(self):
+        """Discard all expired cookies.
+
+        You probably don't need to call this method: expired cookies are never
+        sent back to the server (provided you're using DefaultCookiePolicy),
+        this method is called by CookieJar itself every so often, and the
+        .save() method won't save expired cookies anyway (unless you ask
+        otherwise by passing a true ignore_expires argument).
+
+        """
+        self._cookies_lock.acquire()
+        try:
+            now = time.time()
+            for cookie in self:
+                if cookie.is_expired(now):
+                    self.clear(cookie.domain, cookie.path, cookie.name)
+        finally:
+            self._cookies_lock.release()
+
+    def __iter__(self):
+        return deepvalues(self._cookies)
+
+    def __len__(self):
+        """Return number of contained cookies."""
+        i = 0
+        for cookie in self: i = i + 1
+        return i
+
+    def __repr__(self):
+        r = []
+        for cookie in self: r.append(repr(cookie))
+        return "<%s[%s]>" % (self.__class__.__name__, ", ".join(r))
+
+    def __str__(self):
+        r = []
+        for cookie in self: r.append(str(cookie))
+        return "<%s[%s]>" % (self.__class__.__name__, ", ".join(r))
+
+
+# derives from OSError for backwards-compatibility with Python 2.4.0
+class LoadError(OSError): pass
+
+class FileCookieJar(CookieJar):
+    """CookieJar that can be loaded from and saved to a file."""
+
+    def __init__(self, filename=None, delayload=False, policy=None):
+        """
+        Cookies are NOT loaded from the named file until either the .load() or
+        .revert() method is called.
+
+        """
+        CookieJar.__init__(self, policy)
+        if filename is not None:
+            filename = os.fspath(filename)
+        self.filename = filename
+        self.delayload = bool(delayload)
+
+    def save(self, filename=None, ignore_discard=False, ignore_expires=False):
+        """Save cookies to a file."""
+        raise NotImplementedError()
+
+    def load(self, filename=None, ignore_discard=False, ignore_expires=False):
+        """Load cookies from a file."""
+        if filename is None:
+            if self.filename is not None: filename = self.filename
+            else: raise ValueError(MISSING_FILENAME_TEXT)
+
+        with open(filename) as f:
+            self._really_load(f, filename, ignore_discard, ignore_expires)
+
+    def revert(self, filename=None,
+               ignore_discard=False, ignore_expires=False):
+        """Clear all cookies and reload cookies from a saved file.
+
+        Raises LoadError (or OSError) if reversion is not successful; the
+        object's state will not be altered if this happens.
+
+        """
+        if filename is None:
+            if self.filename is not None: filename = self.filename
+            else: raise ValueError(MISSING_FILENAME_TEXT)
+
+        self._cookies_lock.acquire()
+        try:
+
+            old_state = copy.deepcopy(self._cookies)
+            self._cookies = {}
+            try:
+                self.load(filename, ignore_discard, ignore_expires)
+            except OSError:
+                self._cookies = old_state
+                raise
+
+        finally:
+            self._cookies_lock.release()
+
+
+def lwp_cookie_str(cookie):
+    """Return string representation of Cookie in the LWP cookie file format.
+
+    Actually, the format is extended a bit -- see module docstring.
+
+    """
+    h = [(cookie.name, cookie.value),
+         ("path", cookie.path),
+         ("domain", cookie.domain)]
+    if cookie.port is not None: h.append(("port", cookie.port))
+    if cookie.path_specified: h.append(("path_spec", None))
+    if cookie.port_specified: h.append(("port_spec", None))
+    if cookie.domain_initial_dot: h.append(("domain_dot", None))
+    if cookie.secure: h.append(("secure", None))
+    if cookie.expires: h.append(("expires",
+                               time2isoz(float(cookie.expires))))
+    if cookie.discard: h.append(("discard", None))
+    if cookie.comment: h.append(("comment", cookie.comment))
+    if cookie.comment_url: h.append(("commenturl", cookie.comment_url))
+
+    keys = sorted(cookie._rest.keys())
+    for k in keys:
+        h.append((k, str(cookie._rest[k])))
+
+    h.append(("version", str(cookie.version)))
+
+    return join_header_words([h])
+
+class LWPCookieJar(FileCookieJar):
+    """
+    The LWPCookieJar saves a sequence of "Set-Cookie3" lines.
+    "Set-Cookie3" is the format used by the libwww-perl library, not known
+    to be compatible with any browser, but which is easy to read and
+    doesn't lose information about RFC 2965 cookies.
+
+    Additional methods
+
+    as_lwp_str(ignore_discard=True, ignore_expired=True)
+
+    """
+
+    def as_lwp_str(self, ignore_discard=True, ignore_expires=True):
+        """Return cookies as a string of "\\n"-separated "Set-Cookie3" headers.
+
+        ignore_discard and ignore_expires: see docstring for FileCookieJar.save
+
+        """
+        now = time.time()
+        r = []
+        for cookie in self:
+            if not ignore_discard and cookie.discard:
+                continue
+            if not ignore_expires and cookie.is_expired(now):
+                continue
+            r.append("Set-Cookie3: %s" % lwp_cookie_str(cookie))
+        return "\n".join(r+[""])
+
+    def save(self, filename=None, ignore_discard=False, ignore_expires=False):
+        if filename is None:
+            if self.filename is not None: filename = self.filename
+            else: raise ValueError(MISSING_FILENAME_TEXT)
+
+        with os.fdopen(
+            os.open(filename, os.O_CREAT | os.O_WRONLY | os.O_TRUNC, 0o600),
+            'w',
+        ) as f:
+            # There really isn't an LWP Cookies 2.0 format, but this indicates
+            # that there is extra information in here (domain_dot and
+            # port_spec) while still being compatible with libwww-perl, I hope.
+            f.write("#LWP-Cookies-2.0\n")
+            f.write(self.as_lwp_str(ignore_discard, ignore_expires))
+
+    def _really_load(self, f, filename, ignore_discard, ignore_expires):
+        magic = f.readline()
+        if not self.magic_re.search(magic):
+            msg = ("%r does not look like a Set-Cookie3 (LWP) format "
+                   "file" % filename)
+            raise LoadError(msg)
+
+        now = time.time()
+
+        header = "Set-Cookie3:"
+        boolean_attrs = ("port_spec", "path_spec", "domain_dot",
+                         "secure", "discard")
+        value_attrs = ("version",
+                       "port", "path", "domain",
+                       "expires",
+                       "comment", "commenturl")
+
+        try:
+            while (line := f.readline()) != "":
+                if not line.startswith(header):
+                    continue
+                line = line[len(header):].strip()
+
+                for data in split_header_words([line]):
+                    name, value = data[0]
+                    standard = {}
+                    rest = {}
+                    for k in boolean_attrs:
+                        standard[k] = False
+                    for k, v in data[1:]:
+                        if k is not None:
+                            lc = k.lower()
+                        else:
+                            lc = None
+                        # don't lose case distinction for unknown fields
+                        if (lc in value_attrs) or (lc in boolean_attrs):
+                            k = lc
+                        if k in boolean_attrs:
+                            if v is None: v = True
+                            standard[k] = v
+                        elif k in value_attrs:
+                            standard[k] = v
+                        else:
+                            rest[k] = v
+
+                    h = standard.get
+                    expires = h("expires")
+                    discard = h("discard")
+                    if expires is not None:
+                        expires = iso2time(expires)
+                    if expires is None:
+                        discard = True
+                    domain = h("domain")
+                    domain_specified = domain.startswith(".")
+                    c = Cookie(h("version"), name, value,
+                               h("port"), h("port_spec"),
+                               domain, domain_specified, h("domain_dot"),
+                               h("path"), h("path_spec"),
+                               h("secure"),
+                               expires,
+                               discard,
+                               h("comment"),
+                               h("commenturl"),
+                               rest)
+                    if not ignore_discard and c.discard:
+                        continue
+                    if not ignore_expires and c.is_expired(now):
+                        continue
+                    self.set_cookie(c)
+        except OSError:
+            raise
+        except Exception:
+            _warn_unhandled_exception()
+            raise LoadError("invalid Set-Cookie3 format file %r: %r" %
+                            (filename, line))
+
+
+class MozillaCookieJar(FileCookieJar):
+    """
+
+    WARNING: you may want to backup your browser's cookies file if you use
+    this class to save cookies.  I *think* it works, but there have been
+    bugs in the past!
+
+    This class differs from CookieJar only in the format it uses to save and
+    load cookies to and from a file.  This class uses the Mozilla/Netscape
+    'cookies.txt' format.  curl and lynx use this file format, too.
+
+    Don't expect cookies saved while the browser is running to be noticed by
+    the browser (in fact, Mozilla on unix will overwrite your saved cookies if
+    you change them on disk while it's running; on Windows, you probably can't
+    save at all while the browser is running).
+
+    Note that the Mozilla/Netscape format will downgrade RFC2965 cookies to
+    Netscape cookies on saving.
+
+    In particular, the cookie version and port number information is lost,
+    together with information about whether or not Path, Port and Discard were
+    specified by the Set-Cookie2 (or Set-Cookie) header, and whether or not the
+    domain as set in the HTTP header started with a dot (yes, I'm aware some
+    domains in Netscape files start with a dot and some don't -- trust me, you
+    really don't want to know any more about this).
+
+    Note that though Mozilla and Netscape use the same format, they use
+    slightly different headers.  The class saves cookies using the Netscape
+    header by default (Mozilla can cope with that).
+
+    """
+
+    def _really_load(self, f, filename, ignore_discard, ignore_expires):
+        now = time.time()
+
+        if not NETSCAPE_MAGIC_RGX.match(f.readline()):
+            raise LoadError(
+                "%r does not look like a Netscape format cookies file" %
+                filename)
+
+        try:
+            while (line := f.readline()) != "":
+                rest = {}
+
+                # httponly is a cookie flag as defined in rfc6265
+                # when encoded in a netscape cookie file,
+                # the line is prepended with "#HttpOnly_"
+                if line.startswith(HTTPONLY_PREFIX):
+                    rest[HTTPONLY_ATTR] = ""
+                    line = line[len(HTTPONLY_PREFIX):]
+
+                # last field may be absent, so keep any trailing tab
+                if line.endswith("\n"): line = line[:-1]
+
+                # skip comments and blank lines XXX what is $ for?
+                if (line.strip().startswith(("#", "$")) or
+                    line.strip() == ""):
+                    continue
+
+                domain, domain_specified, path, secure, expires, name, value = \
+                        line.split("\t")
+                secure = (secure == "TRUE")
+                domain_specified = (domain_specified == "TRUE")
+                if name == "":
+                    # cookies.txt regards 'Set-Cookie: foo' as a cookie
+                    # with no name, whereas http.cookiejar regards it as a
+                    # cookie with no value.
+                    name = value
+                    value = None
+
+                initial_dot = domain.startswith(".")
+                assert domain_specified == initial_dot
+
+                discard = False
+                if expires == "":
+                    expires = None
+                    discard = True
+
+                # assume path_specified is false
+                c = Cookie(0, name, value,
+                           None, False,
+                           domain, domain_specified, initial_dot,
+                           path, False,
+                           secure,
+                           expires,
+                           discard,
+                           None,
+                           None,
+                           rest)
+                if not ignore_discard and c.discard:
+                    continue
+                if not ignore_expires and c.is_expired(now):
+                    continue
+                self.set_cookie(c)
+
+        except OSError:
+            raise
+        except Exception:
+            _warn_unhandled_exception()
+            raise LoadError("invalid Netscape format cookies file %r: %r" %
+                            (filename, line))
+
+    def save(self, filename=None, ignore_discard=False, ignore_expires=False):
+        if filename is None:
+            if self.filename is not None: filename = self.filename
+            else: raise ValueError(MISSING_FILENAME_TEXT)
+
+        with os.fdopen(
+            os.open(filename, os.O_CREAT | os.O_WRONLY | os.O_TRUNC, 0o600),
+            'w',
+        ) as f:
+            f.write(NETSCAPE_HEADER_TEXT)
+            now = time.time()
+            for cookie in self:
+                domain = cookie.domain
+                if not ignore_discard and cookie.discard:
+                    continue
+                if not ignore_expires and cookie.is_expired(now):
+                    continue
+                if cookie.secure: secure = "TRUE"
+                else: secure = "FALSE"
+                if domain.startswith("."): initial_dot = "TRUE"
+                else: initial_dot = "FALSE"
+                if cookie.expires is not None:
+                    expires = str(cookie.expires)
+                else:
+                    expires = ""
+                if cookie.value is None:
+                    # cookies.txt regards 'Set-Cookie: foo' as a cookie
+                    # with no name, whereas http.cookiejar regards it as a
+                    # cookie with no value.
+                    name = ""
+                    value = cookie.name
+                else:
+                    name = cookie.name
+                    value = cookie.value
+                if cookie.has_nonstandard_attr(HTTPONLY_ATTR):
+                    domain = HTTPONLY_PREFIX + domain
+                f.write(
+                    "\t".join([domain, initial_dot, cookie.path,
+                               secure, expires, name, value])+
+                    "\n")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookies.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookies.py
new file mode 100644
index 0000000000000000000000000000000000000000..d5b8ba939bee7c58fb4c0cf5f1fcd2e7f956743a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/cookies.py
@@ -0,0 +1,633 @@
+####
+# Copyright 2000 by Timothy O'Malley <timo@alum.mit.edu>
+#
+#                All Rights Reserved
+#
+# Permission to use, copy, modify, and distribute this software
+# and its documentation for any purpose and without fee is hereby
+# granted, provided that the above copyright notice appear in all
+# copies and that both that copyright notice and this permission
+# notice appear in supporting documentation, and that the name of
+# Timothy O'Malley  not be used in advertising or publicity
+# pertaining to distribution of the software without specific, written
+# prior permission.
+#
+# Timothy O'Malley DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
+# SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL Timothy O'Malley BE LIABLE FOR
+# ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE.
+#
+####
+#
+# Id: Cookie.py,v 2.29 2000/08/23 05:28:49 timo Exp
+#   by Timothy O'Malley <timo@alum.mit.edu>
+#
+#  Cookie.py is a Python module for the handling of HTTP
+#  cookies as a Python dictionary.  See RFC 2109 for more
+#  information on cookies.
+#
+#  The original idea to treat Cookies as a dictionary came from
+#  Dave Mitchell (davem@magnet.com) in 1995, when he released the
+#  first version of nscookie.py.
+#
+####
+
+r"""
+Here's a sample session to show how to use this module.
+At the moment, this is the only documentation.
+
+The Basics
+----------
+
+Importing is easy...
+
+   >>> from http import cookies
+
+Most of the time you start by creating a cookie.
+
+   >>> C = cookies.SimpleCookie()
+
+Once you've created your Cookie, you can add values just as if it were
+a dictionary.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C["fig"] = "newton"
+   >>> C["sugar"] = "wafer"
+   >>> C.output()
+   'Set-Cookie: fig=newton\r\nSet-Cookie: sugar=wafer'
+
+Notice that the printable representation of a Cookie is the
+appropriate format for a Set-Cookie: header.  This is the
+default behavior.  You can change the header and printed
+attributes by using the .output() function
+
+   >>> C = cookies.SimpleCookie()
+   >>> C["rocky"] = "road"
+   >>> C["rocky"]["path"] = "/cookie"
+   >>> print(C.output(header="Cookie:"))
+   Cookie: rocky=road; Path=/cookie
+   >>> print(C.output(attrs=[], header="Cookie:"))
+   Cookie: rocky=road
+
+The load() method of a Cookie extracts cookies from a string.  In a
+CGI script, you would use this method to extract the cookies from the
+HTTP_COOKIE environment variable.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C.load("chips=ahoy; vienna=finger")
+   >>> C.output()
+   'Set-Cookie: chips=ahoy\r\nSet-Cookie: vienna=finger'
+
+The load() method is darn-tootin smart about identifying cookies
+within a string.  Escaped quotation marks, nested semicolons, and other
+such trickeries do not confuse it.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C.load('keebler="E=everybody; L=\\"Loves\\"; fudge=;";')
+   >>> print(C)
+   Set-Cookie: keebler="E=everybody; L=\"Loves\"; fudge=;"
+
+Each element of the Cookie also supports all of the RFC 2109
+Cookie attributes.  Here's an example which sets the Path
+attribute.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C["oreo"] = "doublestuff"
+   >>> C["oreo"]["path"] = "/"
+   >>> print(C)
+   Set-Cookie: oreo=doublestuff; Path=/
+
+Each dictionary element has a 'value' attribute, which gives you
+back the value associated with the key.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C["twix"] = "none for you"
+   >>> C["twix"].value
+   'none for you'
+
+The SimpleCookie expects that all values should be standard strings.
+Just to be sure, SimpleCookie invokes the str() builtin to convert
+the value to a string, when the values are set dictionary-style.
+
+   >>> C = cookies.SimpleCookie()
+   >>> C["number"] = 7
+   >>> C["string"] = "seven"
+   >>> C["number"].value
+   '7'
+   >>> C["string"].value
+   'seven'
+   >>> C.output()
+   'Set-Cookie: number=7\r\nSet-Cookie: string=seven'
+
+Finis.
+"""
+
+#
+# Import our required modules
+#
+import re
+import string
+import types
+
+__all__ = ["CookieError", "BaseCookie", "SimpleCookie"]
+
+_nulljoin = ''.join
+_semispacejoin = '; '.join
+_spacejoin = ' '.join
+
+#
+# Define an exception visible to External modules
+#
+class CookieError(Exception):
+    pass
+
+
+# These quoting routines conform to the RFC2109 specification, which in
+# turn references the character definitions from RFC2068.  They provide
+# a two-way quoting algorithm.  Any non-text character is translated
+# into a 4 character sequence: a forward-slash followed by the
+# three-digit octal equivalent of the character.  Any '\' or '"' is
+# quoted with a preceding '\' slash.
+# Because of the way browsers really handle cookies (as opposed to what
+# the RFC says) we also encode "," and ";".
+#
+# These are taken from RFC2068 and RFC2109.
+#       _LegalChars       is the list of chars which don't require "'s
+#       _Translator       hash-table for fast quoting
+#
+_LegalChars = string.ascii_letters + string.digits + "!#$%&'*+-.^_`|~:"
+_UnescapedChars = _LegalChars + ' ()/<=>?@[]{}'
+
+_Translator = {n: '\\%03o' % n
+               for n in set(range(256)) - set(map(ord, _UnescapedChars))}
+_Translator.update({
+    ord('"'): '\\"',
+    ord('\\'): '\\\\',
+})
+
+_is_legal_key = re.compile('[%s]+' % re.escape(_LegalChars)).fullmatch
+_control_character_re = re.compile(r'[\x00-\x1F\x7F]')
+
+
+def _has_control_character(*val):
+    """Detects control characters within a value.
+    Supports any type, as header values can be any type.
+    """
+    return any(_control_character_re.search(str(v)) for v in val)
+
+
+def _quote(str):
+    r"""Quote a string for use in a cookie header.
+
+    If the string does not need to be double-quoted, then just return the
+    string.  Otherwise, surround the string in doublequotes and quote
+    (with a \) special characters.
+    """
+    if str is None or _is_legal_key(str):
+        return str
+    else:
+        return '"' + str.translate(_Translator) + '"'
+
+
+_unquote_sub = re.compile(r'\\(?:([0-3][0-7][0-7])|(.))').sub
+
+def _unquote_replace(m):
+    if m[1]:
+        return chr(int(m[1], 8))
+    else:
+        return m[2]
+
+def _unquote(str):
+    # If there aren't any doublequotes,
+    # then there can't be any special characters.  See RFC 2109.
+    if str is None or len(str) < 2:
+        return str
+    if str[0] != '"' or str[-1] != '"':
+        return str
+
+    # We have to assume that we must decode this string.
+    # Down to work.
+
+    # Remove the "s
+    str = str[1:-1]
+
+    # Check for special sequences.  Examples:
+    #    \012 --> \n
+    #    \"   --> "
+    #
+    return _unquote_sub(_unquote_replace, str)
+
+# The _getdate() routine is used to set the expiration time in the cookie's HTTP
+# header.  By default, _getdate() returns the current time in the appropriate
+# "expires" format for a Set-Cookie header.  The one optional argument is an
+# offset from now, in seconds.  For example, an offset of -3600 means "one hour
+# ago".  The offset may be a floating-point number.
+#
+
+_weekdayname = ['Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat', 'Sun']
+
+_monthname = [None,
+              'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
+              'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec']
+
+def _getdate(future=0, weekdayname=_weekdayname, monthname=_monthname):
+    from time import gmtime, time
+    now = time()
+    year, month, day, hh, mm, ss, wd, y, z = gmtime(now + future)
+    return "%s, %02d %3s %4d %02d:%02d:%02d GMT" % \
+           (weekdayname[wd], day, monthname[month], year, hh, mm, ss)
+
+
+class Morsel(dict):
+    """A class to hold ONE (key, value) pair.
+
+    In a cookie, each such pair may have several attributes, so this class is
+    used to keep the attributes associated with the appropriate key,value pair.
+    This class also includes a coded_value attribute, which is used to hold
+    the network representation of the value.
+    """
+    # RFC 2109 lists these attributes as reserved:
+    #   path       comment         domain
+    #   max-age    secure      version
+    #
+    # For historical reasons, these attributes are also reserved:
+    #   expires
+    #
+    # This is an extension from Microsoft:
+    #   httponly
+    #
+    # This dictionary provides a mapping from the lowercase
+    # variant on the left to the appropriate traditional
+    # formatting on the right.
+    _reserved = {
+        "expires"  : "expires",
+        "path"     : "Path",
+        "comment"  : "Comment",
+        "domain"   : "Domain",
+        "max-age"  : "Max-Age",
+        "secure"   : "Secure",
+        "httponly" : "HttpOnly",
+        "version"  : "Version",
+        "samesite" : "SameSite",
+        "partitioned": "Partitioned",
+    }
+
+    _reserved_defaults = dict.fromkeys(_reserved, "")
+
+    _flags = {'secure', 'httponly', 'partitioned'}
+
+    def __init__(self):
+        # Set defaults
+        self._key = self._value = self._coded_value = None
+
+        # Set default attributes
+        dict.update(self, self._reserved_defaults)
+
+    @property
+    def key(self):
+        return self._key
+
+    @property
+    def value(self):
+        return self._value
+
+    @property
+    def coded_value(self):
+        return self._coded_value
+
+    def __setitem__(self, K, V):
+        K = K.lower()
+        if not K in self._reserved:
+            raise CookieError("Invalid attribute %r" % (K,))
+        if _has_control_character(K, V):
+            raise CookieError(f"Control characters are not allowed in cookies {K!r} {V!r}")
+        dict.__setitem__(self, K, V)
+
+    def setdefault(self, key, val=None):
+        key = key.lower()
+        if key not in self._reserved:
+            raise CookieError("Invalid attribute %r" % (key,))
+        if _has_control_character(key, val):
+            raise CookieError("Control characters are not allowed in cookies %r %r" % (key, val,))
+        return dict.setdefault(self, key, val)
+
+    def __eq__(self, morsel):
+        if not isinstance(morsel, Morsel):
+            return NotImplemented
+        return (dict.__eq__(self, morsel) and
+                self._value == morsel._value and
+                self._key == morsel._key and
+                self._coded_value == morsel._coded_value)
+
+    __ne__ = object.__ne__
+
+    def copy(self):
+        morsel = Morsel()
+        dict.update(morsel, self)
+        morsel.__dict__.update(self.__dict__)
+        return morsel
+
+    def update(self, values):
+        data = {}
+        for key, val in dict(values).items():
+            key = key.lower()
+            if key not in self._reserved:
+                raise CookieError("Invalid attribute %r" % (key,))
+            if _has_control_character(key, val):
+                raise CookieError("Control characters are not allowed in "
+                                  f"cookies {key!r} {val!r}")
+            data[key] = val
+        dict.update(self, data)
+
+    def __ior__(self, values):
+        self.update(values)
+        return self
+
+    def isReservedKey(self, K):
+        return K.lower() in self._reserved
+
+    def set(self, key, val, coded_val):
+        if key.lower() in self._reserved:
+            raise CookieError('Attempt to set a reserved key %r' % (key,))
+        if not _is_legal_key(key):
+            raise CookieError('Illegal key %r' % (key,))
+        if _has_control_character(key, val, coded_val):
+            raise CookieError(
+                "Control characters are not allowed in cookies %r %r %r" % (key, val, coded_val,))
+
+        # It's a good key, so save it.
+        self._key = key
+        self._value = val
+        self._coded_value = coded_val
+
+    def __getstate__(self):
+        return {
+            'key': self._key,
+            'value': self._value,
+            'coded_value': self._coded_value,
+        }
+
+    def __setstate__(self, state):
+        key = state['key']
+        value = state['value']
+        coded_value = state['coded_value']
+        if _has_control_character(key, value, coded_value):
+            raise CookieError("Control characters are not allowed in cookies "
+                              f"{key!r} {value!r} {coded_value!r}")
+        self._key = key
+        self._value = value
+        self._coded_value = coded_value
+
+    def output(self, attrs=None, header="Set-Cookie:"):
+        return "%s %s" % (header, self.OutputString(attrs))
+
+    __str__ = output
+
+    def __repr__(self):
+        return '<%s: %s>' % (self.__class__.__name__, self.OutputString())
+
+    def js_output(self, attrs=None):
+        # Print javascript
+        output_string = self.OutputString(attrs)
+        if _has_control_character(output_string):
+            raise CookieError("Control characters are not allowed in cookies")
+        return """
+        <script type="text/javascript">
+        <!-- begin hiding
+        document.cookie = \"%s\";
+        // end hiding -->
+        </script>
+        """ % (output_string.replace('"', r'\"'))
+
+    def OutputString(self, attrs=None):
+        # Build up our result
+        #
+        result = []
+        append = result.append
+
+        # First, the key=value pair
+        append("%s=%s" % (self.key, self.coded_value))
+
+        # Now add any defined attributes
+        if attrs is None:
+            attrs = self._reserved
+        items = sorted(self.items())
+        for key, value in items:
+            if value == "":
+                continue
+            if key not in attrs:
+                continue
+            if key == "expires" and isinstance(value, int):
+                append("%s=%s" % (self._reserved[key], _getdate(value)))
+            elif key == "max-age" and isinstance(value, int):
+                append("%s=%d" % (self._reserved[key], value))
+            elif key == "comment" and isinstance(value, str):
+                append("%s=%s" % (self._reserved[key], _quote(value)))
+            elif key in self._flags:
+                if value:
+                    append(str(self._reserved[key]))
+            else:
+                append("%s=%s" % (self._reserved[key], value))
+
+        # Return the result
+        return _semispacejoin(result)
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+#
+# Pattern for finding cookie
+#
+# This used to be strict parsing based on the RFC2109 and RFC2068
+# specifications.  I have since discovered that MSIE 3.0x doesn't
+# follow the character rules outlined in those specs.  As a
+# result, the parsing rules here are less strict.
+#
+
+_LegalKeyChars  = r"\w\d!#%&'~_`><@,:/\$\*\+\-\.\^\|\)\(\?\}\{\="
+_LegalValueChars = _LegalKeyChars + r'\[\]'
+_CookiePattern = re.compile(r"""
+    \s*                            # Optional whitespace at start of cookie
+    (?P<key>                       # Start of group 'key'
+    [""" + _LegalKeyChars + r"""]+?   # Any word of at least one letter
+    )                              # End of group 'key'
+    (                              # Optional group: there may not be a value.
+    \s*=\s*                          # Equal Sign
+    (?P<val>                         # Start of group 'val'
+    "(?:[^\\"]|\\.)*"                  # Any double-quoted string
+    |                                  # or
+    # Special case for "expires" attr
+    (\w{3,6}day|\w{3}),\s              # Day of the week or abbreviated day
+    [\w\d\s-]{9,11}\s[\d:]{8}\sGMT     # Date and time in specific format
+    |                                  # or
+    [""" + _LegalValueChars + r"""]*      # Any word or empty string
+    )                                # End of group 'val'
+    )?                             # End of optional value group
+    \s*                            # Any number of spaces.
+    (\s+|;|$)                      # Ending either at space, semicolon, or EOS.
+    """, re.ASCII | re.VERBOSE)    # re.ASCII may be removed if safe.
+
+
+# At long last, here is the cookie class.  Using this class is almost just like
+# using a dictionary.  See this module's docstring for example usage.
+#
+class BaseCookie(dict):
+    """A container class for a set of Morsels."""
+
+    def value_decode(self, val):
+        """real_value, coded_value = value_decode(STRING)
+        Called prior to setting a cookie's value from the network
+        representation.  The VALUE is the value read from HTTP
+        header.
+        Override this function to modify the behavior of cookies.
+        """
+        return val, val
+
+    def value_encode(self, val):
+        """real_value, coded_value = value_encode(VALUE)
+        Called prior to setting a cookie's value from the dictionary
+        representation.  The VALUE is the value being assigned.
+        Override this function to modify the behavior of cookies.
+        """
+        strval = str(val)
+        return strval, strval
+
+    def __init__(self, input=None):
+        if input:
+            self.load(input)
+
+    def __set(self, key, real_value, coded_value):
+        """Private method for setting a cookie's value"""
+        M = self.get(key, Morsel())
+        M.set(key, real_value, coded_value)
+        dict.__setitem__(self, key, M)
+
+    def __setitem__(self, key, value):
+        """Dictionary style assignment."""
+        if isinstance(value, Morsel):
+            # allow assignment of constructed Morsels (e.g. for pickling)
+            dict.__setitem__(self, key, value)
+        else:
+            rval, cval = self.value_encode(value)
+            self.__set(key, rval, cval)
+
+    def output(self, attrs=None, header="Set-Cookie:", sep="\015\012"):
+        """Return a string suitable for HTTP."""
+        result = []
+        items = sorted(self.items())
+        for key, value in items:
+            value_output = value.output(attrs, header)
+            if _has_control_character(value_output):
+                raise CookieError("Control characters are not allowed in cookies")
+            result.append(value_output)
+        return sep.join(result)
+
+    __str__ = output
+
+    def __repr__(self):
+        l = []
+        items = sorted(self.items())
+        for key, value in items:
+            l.append('%s=%s' % (key, repr(value.value)))
+        return '<%s: %s>' % (self.__class__.__name__, _spacejoin(l))
+
+    def js_output(self, attrs=None):
+        """Return a string suitable for JavaScript."""
+        result = []
+        items = sorted(self.items())
+        for key, value in items:
+            result.append(value.js_output(attrs))
+        return _nulljoin(result)
+
+    def load(self, rawdata):
+        """Load cookies from a string (presumably HTTP_COOKIE) or
+        from a dictionary.  Loading cookies from a dictionary 'd'
+        is equivalent to calling:
+            map(Cookie.__setitem__, d.keys(), d.values())
+        """
+        if isinstance(rawdata, str):
+            self.__parse_string(rawdata)
+        else:
+            # self.update() wouldn't call our custom __setitem__
+            for key, value in rawdata.items():
+                self[key] = value
+        return
+
+    def __parse_string(self, str, patt=_CookiePattern):
+        i = 0                 # Our starting point
+        n = len(str)          # Length of string
+        parsed_items = []     # Parsed (type, key, value) triples
+        morsel_seen = False   # A key=value pair was previously encountered
+
+        TYPE_ATTRIBUTE = 1
+        TYPE_KEYVALUE = 2
+
+        # We first parse the whole cookie string and reject it if it's
+        # syntactically invalid (this helps avoid some classes of injection
+        # attacks).
+        while 0 <= i < n:
+            # Start looking for a cookie
+            match = patt.match(str, i)
+            if not match:
+                # No more cookies
+                break
+
+            key, value = match.group("key"), match.group("val")
+            i = match.end(0)
+
+            if key[0] == "$":
+                if not morsel_seen:
+                    # We ignore attributes which pertain to the cookie
+                    # mechanism as a whole, such as "$Version".
+                    # See RFC 2965. (Does anyone care?)
+                    continue
+                parsed_items.append((TYPE_ATTRIBUTE, key[1:], value))
+            elif key.lower() in Morsel._reserved:
+                if not morsel_seen:
+                    # Invalid cookie string
+                    return
+                if value is None:
+                    if key.lower() in Morsel._flags:
+                        parsed_items.append((TYPE_ATTRIBUTE, key, True))
+                    else:
+                        # Invalid cookie string
+                        return
+                else:
+                    parsed_items.append((TYPE_ATTRIBUTE, key, _unquote(value)))
+            elif value is not None:
+                parsed_items.append((TYPE_KEYVALUE, key, self.value_decode(value)))
+                morsel_seen = True
+            else:
+                # Invalid cookie string
+                return
+
+        # The cookie string is valid, apply it.
+        M = None         # current morsel
+        for tp, key, value in parsed_items:
+            if tp == TYPE_ATTRIBUTE:
+                assert M is not None
+                M[key] = value
+            else:
+                assert tp == TYPE_KEYVALUE
+                rval, cval = value
+                self.__set(key, rval, cval)
+                M = self[key]
+
+
+class SimpleCookie(BaseCookie):
+    """
+    SimpleCookie supports strings as cookie values.  When setting
+    the value using the dictionary assignment notation, SimpleCookie
+    calls the builtin str() to convert the value to a string.  Values
+    received from HTTP are kept as strings.
+    """
+    def value_decode(self, val):
+        return _unquote(val), val
+
+    def value_encode(self, val):
+        strval = str(val)
+        return strval, _quote(strval)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/server.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/server.py
new file mode 100644
index 0000000000000000000000000000000000000000..ac1f57c29f06ff7de8219cf243a3a8f6d5dd9053
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/http/server.py
@@ -0,0 +1,1441 @@
+"""HTTP server classes.
+
+Note: BaseHTTPRequestHandler doesn't implement any HTTP request; see
+SimpleHTTPRequestHandler for simple implementations of GET, HEAD and POST,
+and (deprecated) CGIHTTPRequestHandler for CGI scripts.
+
+It does, however, optionally implement HTTP/1.1 persistent connections.
+
+Notes on CGIHTTPRequestHandler
+------------------------------
+
+This class is deprecated. It implements GET and POST requests to cgi-bin scripts.
+
+If the os.fork() function is not present (Windows), subprocess.Popen() is used,
+with slightly altered but never documented semantics.  Use from a threaded
+process is likely to trigger a warning at os.fork() time.
+
+In all cases, the implementation is intentionally naive -- all
+requests are executed synchronously.
+
+SECURITY WARNING: DON'T USE THIS CODE UNLESS YOU ARE INSIDE A FIREWALL
+-- it may execute arbitrary Python code or external programs.
+
+Note that status code 200 is sent prior to execution of a CGI script, so
+scripts cannot send other status codes such as 302 (redirect).
+
+XXX To do:
+
+- log requests even later (to capture byte count)
+- log user-agent header and other interesting goodies
+- send error log to separate file
+"""
+
+
+# See also:
+#
+# HTTP Working Group                                        T. Berners-Lee
+# INTERNET-DRAFT                                            R. T. Fielding
+# <draft-ietf-http-v10-spec-00.txt>                     H. Frystyk Nielsen
+# Expires September 8, 1995                                  March 8, 1995
+#
+# URL: http://www.ics.uci.edu/pub/ietf/http/draft-ietf-http-v10-spec-00.txt
+#
+# and
+#
+# Network Working Group                                      R. Fielding
+# Request for Comments: 2616                                       et al
+# Obsoletes: 2068                                              June 1999
+# Category: Standards Track
+#
+# URL: http://www.faqs.org/rfcs/rfc2616.html
+
+# Log files
+# ---------
+#
+# Here's a quote from the NCSA httpd docs about log file format.
+#
+# | The logfile format is as follows. Each line consists of:
+# |
+# | host rfc931 authuser [DD/Mon/YYYY:hh:mm:ss] "request" ddd bbbb
+# |
+# |        host: Either the DNS name or the IP number of the remote client
+# |        rfc931: Any information returned by identd for this person,
+# |                - otherwise.
+# |        authuser: If user sent a userid for authentication, the user name,
+# |                  - otherwise.
+# |        DD: Day
+# |        Mon: Month (calendar name)
+# |        YYYY: Year
+# |        hh: hour (24-hour format, the machine's timezone)
+# |        mm: minutes
+# |        ss: seconds
+# |        request: The first line of the HTTP request as sent by the client.
+# |        ddd: the status code returned by the server, - if not available.
+# |        bbbb: the total number of bytes sent,
+# |              *not including the HTTP/1.0 header*, - if not available
+# |
+# | You can determine the name of the file accessed through request.
+#
+# (Actually, the latter is only true if you know the server configuration
+# at the time the request was made!)
+
+__version__ = "0.6"
+
+__all__ = [
+    "HTTPServer", "ThreadingHTTPServer",
+    "HTTPSServer", "ThreadingHTTPSServer",
+    "BaseHTTPRequestHandler", "SimpleHTTPRequestHandler",
+    "CGIHTTPRequestHandler",
+]
+
+import copy
+import datetime
+import email.utils
+import html
+import http.client
+import io
+import itertools
+import mimetypes
+import os
+import posixpath
+import select
+import shutil
+import socket
+import socketserver
+import sys
+import time
+import urllib.parse
+
+from http import HTTPStatus
+
+
+# Default error message template
+DEFAULT_ERROR_MESSAGE = """\
+<!DOCTYPE HTML>
+<html lang="en">
+    <head>
+        <meta charset="utf-8">
+        <style type="text/css">
+            :root {
+                color-scheme: light dark;
+            }
+        </style>
+        <title>Error response</title>
+    </head>
+    <body>
+        <h1>Error response</h1>
+        <p>Error code: %(code)d</p>
+        <p>Message: %(message)s.</p>
+        <p>Error code explanation: %(code)s - %(explain)s.</p>
+    </body>
+</html>
+"""
+
+DEFAULT_ERROR_CONTENT_TYPE = "text/html;charset=utf-8"
+
+# Data larger than this will be read in chunks, to prevent extreme
+# overallocation.
+_MIN_READ_BUF_SIZE = 1 << 20
+
+class HTTPServer(socketserver.TCPServer):
+
+    allow_reuse_address = True    # Seems to make sense in testing environment
+    allow_reuse_port = False
+
+    def server_bind(self):
+        """Override server_bind to store the server name."""
+        socketserver.TCPServer.server_bind(self)
+        host, port = self.server_address[:2]
+        self.server_name = socket.getfqdn(host)
+        self.server_port = port
+
+
+class ThreadingHTTPServer(socketserver.ThreadingMixIn, HTTPServer):
+    daemon_threads = True
+
+
+class HTTPSServer(HTTPServer):
+    def __init__(self, server_address, RequestHandlerClass,
+                 bind_and_activate=True, *, certfile, keyfile=None,
+                 password=None, alpn_protocols=None):
+        try:
+            import ssl
+        except ImportError:
+            raise RuntimeError("SSL module is missing; "
+                               "HTTPS support is unavailable")
+
+        self.ssl = ssl
+        self.certfile = certfile
+        self.keyfile = keyfile
+        self.password = password
+        # Support by default HTTP/1.1
+        self.alpn_protocols = (
+            ["http/1.1"] if alpn_protocols is None else alpn_protocols
+        )
+
+        super().__init__(server_address,
+                         RequestHandlerClass,
+                         bind_and_activate)
+
+    def server_activate(self):
+        """Wrap the socket in SSLSocket."""
+        super().server_activate()
+        context = self._create_context()
+        self.socket = context.wrap_socket(self.socket, server_side=True)
+
+    def _create_context(self):
+        """Create a secure SSL context."""
+        context = self.ssl.create_default_context(self.ssl.Purpose.CLIENT_AUTH)
+        context.load_cert_chain(self.certfile, self.keyfile, self.password)
+        context.set_alpn_protocols(self.alpn_protocols)
+        return context
+
+
+class ThreadingHTTPSServer(socketserver.ThreadingMixIn, HTTPSServer):
+    daemon_threads = True
+
+
+class BaseHTTPRequestHandler(socketserver.StreamRequestHandler):
+
+    """HTTP request handler base class.
+
+    The following explanation of HTTP serves to guide you through the
+    code as well as to expose any misunderstandings I may have about
+    HTTP (so you don't need to read the code to figure out I'm wrong
+    :-).
+
+    HTTP (HyperText Transfer Protocol) is an extensible protocol on
+    top of a reliable stream transport (e.g. TCP/IP).  The protocol
+    recognizes three parts to a request:
+
+    1. One line identifying the request type and path
+    2. An optional set of RFC-822-style headers
+    3. An optional data part
+
+    The headers and data are separated by a blank line.
+
+    The first line of the request has the form
+
+    <command> <path> <version>
+
+    where <command> is a (case-sensitive) keyword such as GET or POST,
+    <path> is a string containing path information for the request,
+    and <version> should be the string "HTTP/1.0" or "HTTP/1.1".
+    <path> is encoded using the URL encoding scheme (using %xx to signify
+    the ASCII character with hex code xx).
+
+    The specification specifies that lines are separated by CRLF but
+    for compatibility with the widest range of clients recommends
+    servers also handle LF.  Similarly, whitespace in the request line
+    is treated sensibly (allowing multiple spaces between components
+    and allowing trailing whitespace).
+
+    Similarly, for output, lines ought to be separated by CRLF pairs
+    but most clients grok LF characters just fine.
+
+    If the first line of the request has the form
+
+    <command> <path>
+
+    (i.e. <version> is left out) then this is assumed to be an HTTP
+    0.9 request; this form has no optional headers and data part and
+    the reply consists of just the data.
+
+    The reply form of the HTTP 1.x protocol again has three parts:
+
+    1. One line giving the response code
+    2. An optional set of RFC-822-style headers
+    3. The data
+
+    Again, the headers and data are separated by a blank line.
+
+    The response code line has the form
+
+    <version> <responsecode> <responsestring>
+
+    where <version> is the protocol version ("HTTP/1.0" or "HTTP/1.1"),
+    <responsecode> is a 3-digit response code indicating success or
+    failure of the request, and <responsestring> is an optional
+    human-readable string explaining what the response code means.
+
+    This server parses the request and the headers, and then calls a
+    function specific to the request type (<command>).  Specifically,
+    a request SPAM will be handled by a method do_SPAM().  If no
+    such method exists the server sends an error response to the
+    client.  If it exists, it is called with no arguments:
+
+    do_SPAM()
+
+    Note that the request name is case sensitive (i.e. SPAM and spam
+    are different requests).
+
+    The various request details are stored in instance variables:
+
+    - client_address is the client IP address in the form (host,
+    port);
+
+    - command, path and version are the broken-down request line;
+
+    - headers is an instance of email.message.Message (or a derived
+    class) containing the header information;
+
+    - rfile is a file object open for reading positioned at the
+    start of the optional input data part;
+
+    - wfile is a file object open for writing.
+
+    IT IS IMPORTANT TO ADHERE TO THE PROTOCOL FOR WRITING!
+
+    The first thing to be written must be the response line.  Then
+    follow 0 or more header lines, then a blank line, and then the
+    actual data (if any).  The meaning of the header lines depends on
+    the command executed by the server; in most cases, when data is
+    returned, there should be at least one header line of the form
+
+    Content-type: <type>/<subtype>
+
+    where <type> and <subtype> should be registered MIME types,
+    e.g. "text/html" or "text/plain".
+
+    """
+
+    # The Python system version, truncated to its first component.
+    sys_version = "Python/" + sys.version.split()[0]
+
+    # The server software version.  You may want to override this.
+    # The format is multiple whitespace-separated strings,
+    # where each string is of the form name[/version].
+    server_version = "BaseHTTP/" + __version__
+
+    error_message_format = DEFAULT_ERROR_MESSAGE
+    error_content_type = DEFAULT_ERROR_CONTENT_TYPE
+
+    # The default request version.  This only affects responses up until
+    # the point where the request line is parsed, so it mainly decides what
+    # the client gets back when sending a malformed request line.
+    # Most web servers default to HTTP 0.9, i.e. don't send a status line.
+    default_request_version = "HTTP/0.9"
+
+    def parse_request(self):
+        """Parse a request (internal).
+
+        The request should be stored in self.raw_requestline; the results
+        are in self.command, self.path, self.request_version and
+        self.headers.
+
+        Return True for success, False for failure; on failure, any relevant
+        error response has already been sent back.
+
+        """
+        is_http_0_9 = False
+        self.command = None  # set in case of error on the first line
+        self.request_version = version = self.default_request_version
+        self.close_connection = True
+        requestline = str(self.raw_requestline, 'iso-8859-1')
+        requestline = requestline.rstrip('\r\n')
+        self.requestline = requestline
+        words = requestline.split()
+        if len(words) == 0:
+            return False
+
+        if len(words) >= 3:  # Enough to determine protocol version
+            version = words[-1]
+            try:
+                if not version.startswith('HTTP/'):
+                    raise ValueError
+                base_version_number = version.split('/', 1)[1]
+                version_number = base_version_number.split(".")
+                # RFC 2145 section 3.1 says there can be only one "." and
+                #   - major and minor numbers MUST be treated as
+                #      separate integers;
+                #   - HTTP/2.4 is a lower version than HTTP/2.13, which in
+                #      turn is lower than HTTP/12.3;
+                #   - Leading zeros MUST be ignored by recipients.
+                if len(version_number) != 2:
+                    raise ValueError
+                if any(not component.isdigit() for component in version_number):
+                    raise ValueError("non digit in http version")
+                if any(len(component) > 10 for component in version_number):
+                    raise ValueError("unreasonable length http version")
+                version_number = int(version_number[0]), int(version_number[1])
+            except (ValueError, IndexError):
+                self.send_error(
+                    HTTPStatus.BAD_REQUEST,
+                    "Bad request version (%r)" % version)
+                return False
+            if version_number >= (1, 1) and self.protocol_version >= "HTTP/1.1":
+                self.close_connection = False
+            if version_number >= (2, 0):
+                self.send_error(
+                    HTTPStatus.HTTP_VERSION_NOT_SUPPORTED,
+                    "Invalid HTTP version (%s)" % base_version_number)
+                return False
+            self.request_version = version
+
+        if not 2 <= len(words) <= 3:
+            self.send_error(
+                HTTPStatus.BAD_REQUEST,
+                "Bad request syntax (%r)" % requestline)
+            return False
+        command, path = words[:2]
+        if len(words) == 2:
+            self.close_connection = True
+            if command != 'GET':
+                self.send_error(
+                    HTTPStatus.BAD_REQUEST,
+                    "Bad HTTP/0.9 request type (%r)" % command)
+                return False
+            is_http_0_9 = True
+        self.command, self.path = command, path
+
+        # gh-87389: The purpose of replacing '//' with '/' is to protect
+        # against open redirect attacks possibly triggered if the path starts
+        # with '//' because http clients treat //path as an absolute URI
+        # without scheme (similar to http://path) rather than a path.
+        if self.path.startswith('//'):
+            self.path = '/' + self.path.lstrip('/')  # Reduce to a single /
+
+        # For HTTP/0.9, headers are not expected at all.
+        if is_http_0_9:
+            self.headers = {}
+            return True
+
+        # Examine the headers and look for a Connection directive.
+        try:
+            self.headers = http.client.parse_headers(self.rfile,
+                                                     _class=self.MessageClass)
+        except http.client.LineTooLong as err:
+            self.send_error(
+                HTTPStatus.REQUEST_HEADER_FIELDS_TOO_LARGE,
+                "Line too long",
+                str(err))
+            return False
+        except http.client.HTTPException as err:
+            self.send_error(
+                HTTPStatus.REQUEST_HEADER_FIELDS_TOO_LARGE,
+                "Too many headers",
+                str(err)
+            )
+            return False
+
+        conntype = self.headers.get('Connection', "")
+        if conntype.lower() == 'close':
+            self.close_connection = True
+        elif (conntype.lower() == 'keep-alive' and
+              self.protocol_version >= "HTTP/1.1"):
+            self.close_connection = False
+        # Examine the headers and look for an Expect directive
+        expect = self.headers.get('Expect', "")
+        if (expect.lower() == "100-continue" and
+                self.protocol_version >= "HTTP/1.1" and
+                self.request_version >= "HTTP/1.1"):
+            if not self.handle_expect_100():
+                return False
+        return True
+
+    def handle_expect_100(self):
+        """Decide what to do with an "Expect: 100-continue" header.
+
+        If the client is expecting a 100 Continue response, we must
+        respond with either a 100 Continue or a final response before
+        waiting for the request body. The default is to always respond
+        with a 100 Continue. You can behave differently (for example,
+        reject unauthorized requests) by overriding this method.
+
+        This method should either return True (possibly after sending
+        a 100 Continue response) or send an error response and return
+        False.
+
+        """
+        self.send_response_only(HTTPStatus.CONTINUE)
+        self.end_headers()
+        return True
+
+    def handle_one_request(self):
+        """Handle a single HTTP request.
+
+        You normally don't need to override this method; see the class
+        __doc__ string for information on how to handle specific HTTP
+        commands such as GET and POST.
+
+        """
+        try:
+            self.raw_requestline = self.rfile.readline(65537)
+            if len(self.raw_requestline) > 65536:
+                self.requestline = ''
+                self.request_version = ''
+                self.command = ''
+                self.send_error(HTTPStatus.REQUEST_URI_TOO_LONG)
+                return
+            if not self.raw_requestline:
+                self.close_connection = True
+                return
+            if not self.parse_request():
+                # An error code has been sent, just exit
+                return
+            mname = 'do_' + self.command
+            if not hasattr(self, mname):
+                self.send_error(
+                    HTTPStatus.NOT_IMPLEMENTED,
+                    "Unsupported method (%r)" % self.command)
+                return
+            method = getattr(self, mname)
+            method()
+            self.wfile.flush() #actually send the response if not already done.
+        except TimeoutError as e:
+            #a read or a write timed out.  Discard this connection
+            self.log_error("Request timed out: %r", e)
+            self.close_connection = True
+            return
+
+    def handle(self):
+        """Handle multiple requests if necessary."""
+        self.close_connection = True
+
+        self.handle_one_request()
+        while not self.close_connection:
+            self.handle_one_request()
+
+    def send_error(self, code, message=None, explain=None):
+        """Send and log an error reply.
+
+        Arguments are
+        * code:    an HTTP error code
+                   3 digits
+        * message: a simple optional 1 line reason phrase.
+                   *( HTAB / SP / VCHAR / %x80-FF )
+                   defaults to short entry matching the response code
+        * explain: a detailed message defaults to the long entry
+                   matching the response code.
+
+        This sends an error response (so it must be called before any
+        output has been generated), logs the error, and finally sends
+        a piece of HTML explaining the error to the user.
+
+        """
+
+        try:
+            shortmsg, longmsg = self.responses[code]
+        except KeyError:
+            shortmsg, longmsg = '???', '???'
+        if message is None:
+            message = shortmsg
+        if explain is None:
+            explain = longmsg
+        self.log_error("code %d, message %s", code, message)
+        self.send_response(code, message)
+        self.send_header('Connection', 'close')
+
+        # Message body is omitted for cases described in:
+        #  - RFC7230: 3.3. 1xx, 204(No Content), 304(Not Modified)
+        #  - RFC7231: 6.3.6. 205(Reset Content)
+        body = None
+        if (code >= 200 and
+            code not in (HTTPStatus.NO_CONTENT,
+                         HTTPStatus.RESET_CONTENT,
+                         HTTPStatus.NOT_MODIFIED)):
+            # HTML encode to prevent Cross Site Scripting attacks
+            # (see bug #1100201)
+            content = (self.error_message_format % {
+                'code': code,
+                'message': html.escape(message, quote=False),
+                'explain': html.escape(explain, quote=False)
+            })
+            body = content.encode('UTF-8', 'replace')
+            self.send_header("Content-Type", self.error_content_type)
+            self.send_header('Content-Length', str(len(body)))
+        self.end_headers()
+
+        if self.command != 'HEAD' and body:
+            self.wfile.write(body)
+
+    def send_response(self, code, message=None):
+        """Add the response header to the headers buffer and log the
+        response code.
+
+        Also send two standard headers with the server software
+        version and the current date.
+
+        """
+        self.log_request(code)
+        self.send_response_only(code, message)
+        self.send_header('Server', self.version_string())
+        self.send_header('Date', self.date_time_string())
+
+    def send_response_only(self, code, message=None):
+        """Send the response header only."""
+        if self.request_version != 'HTTP/0.9':
+            if message is None:
+                if code in self.responses:
+                    message = self.responses[code][0]
+                else:
+                    message = ''
+            if not hasattr(self, '_headers_buffer'):
+                self._headers_buffer = []
+            self._headers_buffer.append(("%s %d %s\r\n" %
+                    (self.protocol_version, code, message)).encode(
+                        'latin-1', 'strict'))
+
+    def send_header(self, keyword, value):
+        """Send a MIME header to the headers buffer."""
+        if self.request_version != 'HTTP/0.9':
+            if not hasattr(self, '_headers_buffer'):
+                self._headers_buffer = []
+            self._headers_buffer.append(
+                ("%s: %s\r\n" % (keyword, value)).encode('latin-1', 'strict'))
+
+        if keyword.lower() == 'connection':
+            if value.lower() == 'close':
+                self.close_connection = True
+            elif value.lower() == 'keep-alive':
+                self.close_connection = False
+
+    def end_headers(self):
+        """Send the blank line ending the MIME headers."""
+        if self.request_version != 'HTTP/0.9':
+            self._headers_buffer.append(b"\r\n")
+            self.flush_headers()
+
+    def flush_headers(self):
+        if hasattr(self, '_headers_buffer'):
+            self.wfile.write(b"".join(self._headers_buffer))
+            self._headers_buffer = []
+
+    def log_request(self, code='-', size='-'):
+        """Log an accepted request.
+
+        This is called by send_response().
+
+        """
+        if isinstance(code, HTTPStatus):
+            code = code.value
+        self.log_message('"%s" %s %s',
+                         self.requestline, str(code), str(size))
+
+    def log_error(self, format, *args):
+        """Log an error.
+
+        This is called when a request cannot be fulfilled.  By
+        default it passes the message on to log_message().
+
+        Arguments are the same as for log_message().
+
+        XXX This should go to the separate error log.
+
+        """
+
+        self.log_message(format, *args)
+
+    # https://en.wikipedia.org/wiki/List_of_Unicode_characters#Control_codes
+    _control_char_table = str.maketrans(
+            {c: fr'\x{c:02x}' for c in itertools.chain(range(0x20), range(0x7f,0xa0))})
+    _control_char_table[ord('\\')] = r'\\'
+
+    def log_message(self, format, *args):
+        """Log an arbitrary message.
+
+        This is used by all other logging functions.  Override
+        it if you have specific logging wishes.
+
+        The first argument, FORMAT, is a format string for the
+        message to be logged.  If the format string contains
+        any % escapes requiring parameters, they should be
+        specified as subsequent arguments (it's just like
+        printf!).
+
+        The client ip and current date/time are prefixed to
+        every message.
+
+        Unicode control characters are replaced with escaped hex
+        before writing the output to stderr.
+
+        """
+
+        message = format % args
+        sys.stderr.write("%s - - [%s] %s\n" %
+                         (self.address_string(),
+                          self.log_date_time_string(),
+                          message.translate(self._control_char_table)))
+
+    def version_string(self):
+        """Return the server software version string."""
+        return self.server_version + ' ' + self.sys_version
+
+    def date_time_string(self, timestamp=None):
+        """Return the current date and time formatted for a message header."""
+        if timestamp is None:
+            timestamp = time.time()
+        return email.utils.formatdate(timestamp, usegmt=True)
+
+    def log_date_time_string(self):
+        """Return the current time formatted for logging."""
+        now = time.time()
+        year, month, day, hh, mm, ss, x, y, z = time.localtime(now)
+        s = "%02d/%3s/%04d %02d:%02d:%02d" % (
+                day, self.monthname[month], year, hh, mm, ss)
+        return s
+
+    weekdayname = ['Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat', 'Sun']
+
+    monthname = [None,
+                 'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
+                 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec']
+
+    def address_string(self):
+        """Return the client address."""
+
+        return self.client_address[0]
+
+    # Essentially static class variables
+
+    # The version of the HTTP protocol we support.
+    # Set this to HTTP/1.1 to enable automatic keepalive
+    protocol_version = "HTTP/1.0"
+
+    # MessageClass used to parse headers
+    MessageClass = http.client.HTTPMessage
+
+    # hack to maintain backwards compatibility
+    responses = {
+        v: (v.phrase, v.description)
+        for v in HTTPStatus.__members__.values()
+    }
+
+
+class SimpleHTTPRequestHandler(BaseHTTPRequestHandler):
+
+    """Simple HTTP request handler with GET and HEAD commands.
+
+    This serves files from the current directory and any of its
+    subdirectories.  The MIME type for files is determined by
+    calling the .guess_type() method.
+
+    The GET and HEAD requests are identical except that the HEAD
+    request omits the actual contents of the file.
+
+    """
+
+    server_version = "SimpleHTTP/" + __version__
+    index_pages = ("index.html", "index.htm")
+    extensions_map = _encodings_map_default = {
+        '.gz': 'application/gzip',
+        '.Z': 'application/octet-stream',
+        '.bz2': 'application/x-bzip2',
+        '.xz': 'application/x-xz',
+    }
+
+    def __init__(self, *args, directory=None, **kwargs):
+        if directory is None:
+            directory = os.getcwd()
+        self.directory = os.fspath(directory)
+        super().__init__(*args, **kwargs)
+
+    def do_GET(self):
+        """Serve a GET request."""
+        f = self.send_head()
+        if f:
+            try:
+                self.copyfile(f, self.wfile)
+            finally:
+                f.close()
+
+    def do_HEAD(self):
+        """Serve a HEAD request."""
+        f = self.send_head()
+        if f:
+            f.close()
+
+    def send_head(self):
+        """Common code for GET and HEAD commands.
+
+        This sends the response code and MIME headers.
+
+        Return value is either a file object (which has to be copied
+        to the outputfile by the caller unless the command was HEAD,
+        and must be closed by the caller under all circumstances), or
+        None, in which case the caller has nothing further to do.
+
+        """
+        path = self.translate_path(self.path)
+        f = None
+        if os.path.isdir(path):
+            parts = urllib.parse.urlsplit(self.path)
+            if not parts.path.endswith(('/', '%2f', '%2F')):
+                # redirect browser - doing basically what apache does
+                self.send_response(HTTPStatus.MOVED_PERMANENTLY)
+                new_parts = (parts[0], parts[1], parts[2] + '/',
+                             parts[3], parts[4])
+                new_url = urllib.parse.urlunsplit(new_parts)
+                self.send_header("Location", new_url)
+                self.send_header("Content-Length", "0")
+                self.end_headers()
+                return None
+            for index in self.index_pages:
+                index = os.path.join(path, index)
+                if os.path.isfile(index):
+                    path = index
+                    break
+            else:
+                return self.list_directory(path)
+        ctype = self.guess_type(path)
+        # check for trailing "/" which should return 404. See Issue17324
+        # The test for this was added in test_httpserver.py
+        # However, some OS platforms accept a trailingSlash as a filename
+        # See discussion on python-dev and Issue34711 regarding
+        # parsing and rejection of filenames with a trailing slash
+        if path.endswith("/"):
+            self.send_error(HTTPStatus.NOT_FOUND, "File not found")
+            return None
+        try:
+            f = open(path, 'rb')
+        except OSError:
+            self.send_error(HTTPStatus.NOT_FOUND, "File not found")
+            return None
+
+        try:
+            fs = os.fstat(f.fileno())
+            # Use browser cache if possible
+            if ("If-Modified-Since" in self.headers
+                    and "If-None-Match" not in self.headers):
+                # compare If-Modified-Since and time of last file modification
+                try:
+                    ims = email.utils.parsedate_to_datetime(
+                        self.headers["If-Modified-Since"])
+                except (TypeError, IndexError, OverflowError, ValueError):
+                    # ignore ill-formed values
+                    pass
+                else:
+                    if ims.tzinfo is None:
+                        # obsolete format with no timezone, cf.
+                        # https://tools.ietf.org/html/rfc7231#section-7.1.1.1
+                        ims = ims.replace(tzinfo=datetime.timezone.utc)
+                    if ims.tzinfo is datetime.timezone.utc:
+                        # compare to UTC datetime of last modification
+                        last_modif = datetime.datetime.fromtimestamp(
+                            fs.st_mtime, datetime.timezone.utc)
+                        # remove microseconds, like in If-Modified-Since
+                        last_modif = last_modif.replace(microsecond=0)
+
+                        if last_modif <= ims:
+                            self.send_response(HTTPStatus.NOT_MODIFIED)
+                            self.end_headers()
+                            f.close()
+                            return None
+
+            self.send_response(HTTPStatus.OK)
+            self.send_header("Content-type", ctype)
+            self.send_header("Content-Length", str(fs[6]))
+            self.send_header("Last-Modified",
+                self.date_time_string(fs.st_mtime))
+            self.end_headers()
+            return f
+        except:
+            f.close()
+            raise
+
+    def list_directory(self, path):
+        """Helper to produce a directory listing (absent index.html).
+
+        Return value is either a file object, or None (indicating an
+        error).  In either case, the headers are sent, making the
+        interface the same as for send_head().
+
+        """
+        try:
+            list = os.listdir(path)
+        except OSError:
+            self.send_error(
+                HTTPStatus.NOT_FOUND,
+                "No permission to list directory")
+            return None
+        list.sort(key=lambda a: a.lower())
+        r = []
+        displaypath = self.path
+        displaypath = displaypath.split('#', 1)[0]
+        displaypath = displaypath.split('?', 1)[0]
+        try:
+            displaypath = urllib.parse.unquote(displaypath,
+                                               errors='surrogatepass')
+        except UnicodeDecodeError:
+            displaypath = urllib.parse.unquote(displaypath)
+        displaypath = html.escape(displaypath, quote=False)
+        enc = sys.getfilesystemencoding()
+        title = f'Directory listing for {displaypath}'
+        r.append('<!DOCTYPE HTML>')
+        r.append('<html lang="en">')
+        r.append('<head>')
+        r.append(f'<meta charset="{enc}">')
+        r.append('<style type="text/css">\n:root {\ncolor-scheme: light dark;\n}\n</style>')
+        r.append(f'<title>{title}</title>\n</head>')
+        r.append(f'<body>\n<h1>{title}</h1>')
+        r.append('<hr>\n<ul>')
+        for name in list:
+            fullname = os.path.join(path, name)
+            displayname = linkname = name
+            # Append / for directories or @ for symbolic links
+            if os.path.isdir(fullname):
+                displayname = name + "/"
+                linkname = name + "/"
+            if os.path.islink(fullname):
+                displayname = name + "@"
+                # Note: a link to a directory displays with @ and links with /
+            r.append('<li><a href="%s">%s</a></li>'
+                    % (urllib.parse.quote(linkname,
+                                          errors='surrogatepass'),
+                       html.escape(displayname, quote=False)))
+        r.append('</ul>\n<hr>\n</body>\n</html>\n')
+        encoded = '\n'.join(r).encode(enc, 'surrogateescape')
+        f = io.BytesIO()
+        f.write(encoded)
+        f.seek(0)
+        self.send_response(HTTPStatus.OK)
+        self.send_header("Content-type", "text/html; charset=%s" % enc)
+        self.send_header("Content-Length", str(len(encoded)))
+        self.end_headers()
+        return f
+
+    def translate_path(self, path):
+        """Translate a /-separated PATH to the local filename syntax.
+
+        Components that mean special things to the local file system
+        (e.g. drive or directory names) are ignored.  (XXX They should
+        probably be diagnosed.)
+
+        """
+        # abandon query parameters
+        path = path.split('#', 1)[0]
+        path = path.split('?', 1)[0]
+        # Don't forget explicit trailing slash when normalizing. Issue17324
+        try:
+            path = urllib.parse.unquote(path, errors='surrogatepass')
+        except UnicodeDecodeError:
+            path = urllib.parse.unquote(path)
+        trailing_slash = path.endswith('/')
+        path = posixpath.normpath(path)
+        words = path.split('/')
+        words = filter(None, words)
+        path = self.directory
+        for word in words:
+            if os.path.dirname(word) or word in (os.curdir, os.pardir):
+                # Ignore components that are not a simple file/directory name
+                continue
+            path = os.path.join(path, word)
+        if trailing_slash:
+            path += '/'
+        return path
+
+    def copyfile(self, source, outputfile):
+        """Copy all data between two file objects.
+
+        The SOURCE argument is a file object open for reading
+        (or anything with a read() method) and the DESTINATION
+        argument is a file object open for writing (or
+        anything with a write() method).
+
+        The only reason for overriding this would be to change
+        the block size or perhaps to replace newlines by CRLF
+        -- note however that this the default server uses this
+        to copy binary data as well.
+
+        """
+        shutil.copyfileobj(source, outputfile)
+
+    def guess_type(self, path):
+        """Guess the type of a file.
+
+        Argument is a PATH (a filename).
+
+        Return value is a string of the form type/subtype,
+        usable for a MIME Content-type header.
+
+        The default implementation looks the file's extension
+        up in the table self.extensions_map, using application/octet-stream
+        as a default; however it would be permissible (if
+        slow) to look inside the data to make a better guess.
+
+        """
+        base, ext = posixpath.splitext(path)
+        if ext in self.extensions_map:
+            return self.extensions_map[ext]
+        ext = ext.lower()
+        if ext in self.extensions_map:
+            return self.extensions_map[ext]
+        guess, _ = mimetypes.guess_file_type(path)
+        if guess:
+            return guess
+        return 'application/octet-stream'
+
+
+# Utilities for CGIHTTPRequestHandler
+
+def _url_collapse_path(path):
+    """
+    Given a URL path, remove extra '/'s and '.' path elements and collapse
+    any '..' references and returns a collapsed path.
+
+    Implements something akin to RFC-2396 5.2 step 6 to parse relative paths.
+    The utility of this function is limited to is_cgi method and helps
+    preventing some security attacks.
+
+    Returns: The reconstituted URL, which will always start with a '/'.
+
+    Raises: IndexError if too many '..' occur within the path.
+
+    """
+    # Query component should not be involved.
+    path, _, query = path.partition('?')
+    path = urllib.parse.unquote(path)
+
+    # Similar to os.path.split(os.path.normpath(path)) but specific to URL
+    # path semantics rather than local operating system semantics.
+    path_parts = path.split('/')
+    head_parts = []
+    for part in path_parts[:-1]:
+        if part == '..':
+            head_parts.pop() # IndexError if more '..' than prior parts
+        elif part and part != '.':
+            head_parts.append( part )
+    if path_parts:
+        tail_part = path_parts.pop()
+        if tail_part:
+            if tail_part == '..':
+                head_parts.pop()
+                tail_part = ''
+            elif tail_part == '.':
+                tail_part = ''
+    else:
+        tail_part = ''
+
+    if query:
+        tail_part = '?'.join((tail_part, query))
+
+    splitpath = ('/' + '/'.join(head_parts), tail_part)
+    collapsed_path = "/".join(splitpath)
+
+    return collapsed_path
+
+
+
+nobody = None
+
+def nobody_uid():
+    """Internal routine to get nobody's uid"""
+    global nobody
+    if nobody:
+        return nobody
+    try:
+        import pwd
+    except ImportError:
+        return -1
+    try:
+        nobody = pwd.getpwnam('nobody')[2]
+    except KeyError:
+        nobody = 1 + max(x[2] for x in pwd.getpwall())
+    return nobody
+
+
+def executable(path):
+    """Test for executable file."""
+    return os.access(path, os.X_OK)
+
+
+class CGIHTTPRequestHandler(SimpleHTTPRequestHandler):
+
+    """Complete HTTP server with GET, HEAD and POST commands.
+
+    GET and HEAD also support running CGI scripts.
+
+    The POST command is *only* implemented for CGI scripts.
+
+    """
+
+    def __init__(self, *args, **kwargs):
+        import warnings
+        warnings._deprecated("http.server.CGIHTTPRequestHandler",
+                             remove=(3, 15))
+        super().__init__(*args, **kwargs)
+
+    # Determine platform specifics
+    have_fork = hasattr(os, 'fork')
+
+    # Make rfile unbuffered -- we need to read one line and then pass
+    # the rest to a subprocess, so we can't use buffered input.
+    rbufsize = 0
+
+    def do_POST(self):
+        """Serve a POST request.
+
+        This is only implemented for CGI scripts.
+
+        """
+
+        if self.is_cgi():
+            self.run_cgi()
+        else:
+            self.send_error(
+                HTTPStatus.NOT_IMPLEMENTED,
+                "Can only POST to CGI scripts")
+
+    def send_head(self):
+        """Version of send_head that support CGI scripts"""
+        if self.is_cgi():
+            return self.run_cgi()
+        else:
+            return SimpleHTTPRequestHandler.send_head(self)
+
+    def is_cgi(self):
+        """Test whether self.path corresponds to a CGI script.
+
+        Returns True and updates the cgi_info attribute to the tuple
+        (dir, rest) if self.path requires running a CGI script.
+        Returns False otherwise.
+
+        If any exception is raised, the caller should assume that
+        self.path was rejected as invalid and act accordingly.
+
+        The default implementation tests whether the normalized url
+        path begins with one of the strings in self.cgi_directories
+        (and the next character is a '/' or the end of the string).
+
+        """
+        collapsed_path = _url_collapse_path(self.path)
+        dir_sep = collapsed_path.find('/', 1)
+        while dir_sep > 0 and not collapsed_path[:dir_sep] in self.cgi_directories:
+            dir_sep = collapsed_path.find('/', dir_sep+1)
+        if dir_sep > 0:
+            head, tail = collapsed_path[:dir_sep], collapsed_path[dir_sep+1:]
+            self.cgi_info = head, tail
+            return True
+        return False
+
+
+    cgi_directories = ['/cgi-bin', '/htbin']
+
+    def is_executable(self, path):
+        """Test whether argument path is an executable file."""
+        return executable(path)
+
+    def is_python(self, path):
+        """Test whether argument path is a Python script."""
+        head, tail = os.path.splitext(path)
+        return tail.lower() in (".py", ".pyw")
+
+    def run_cgi(self):
+        """Execute a CGI script."""
+        dir, rest = self.cgi_info
+        path = dir + '/' + rest
+        i = path.find('/', len(dir)+1)
+        while i >= 0:
+            nextdir = path[:i]
+            nextrest = path[i+1:]
+
+            scriptdir = self.translate_path(nextdir)
+            if os.path.isdir(scriptdir):
+                dir, rest = nextdir, nextrest
+                i = path.find('/', len(dir)+1)
+            else:
+                break
+
+        # find an explicit query string, if present.
+        rest, _, query = rest.partition('?')
+
+        # dissect the part after the directory name into a script name &
+        # a possible additional path, to be stored in PATH_INFO.
+        i = rest.find('/')
+        if i >= 0:
+            script, rest = rest[:i], rest[i:]
+        else:
+            script, rest = rest, ''
+
+        scriptname = dir + '/' + script
+        scriptfile = self.translate_path(scriptname)
+        if not os.path.exists(scriptfile):
+            self.send_error(
+                HTTPStatus.NOT_FOUND,
+                "No such CGI script (%r)" % scriptname)
+            return
+        if not os.path.isfile(scriptfile):
+            self.send_error(
+                HTTPStatus.FORBIDDEN,
+                "CGI script is not a plain file (%r)" % scriptname)
+            return
+        ispy = self.is_python(scriptname)
+        if self.have_fork or not ispy:
+            if not self.is_executable(scriptfile):
+                self.send_error(
+                    HTTPStatus.FORBIDDEN,
+                    "CGI script is not executable (%r)" % scriptname)
+                return
+
+        # Reference: https://www6.uniovi.es/~antonio/ncsa_httpd/cgi/env.html
+        # XXX Much of the following could be prepared ahead of time!
+        env = copy.deepcopy(os.environ)
+        env['SERVER_SOFTWARE'] = self.version_string()
+        env['SERVER_NAME'] = self.server.server_name
+        env['GATEWAY_INTERFACE'] = 'CGI/1.1'
+        env['SERVER_PROTOCOL'] = self.protocol_version
+        env['SERVER_PORT'] = str(self.server.server_port)
+        env['REQUEST_METHOD'] = self.command
+        uqrest = urllib.parse.unquote(rest)
+        env['PATH_INFO'] = uqrest
+        env['PATH_TRANSLATED'] = self.translate_path(uqrest)
+        env['SCRIPT_NAME'] = scriptname
+        env['QUERY_STRING'] = query
+        env['REMOTE_ADDR'] = self.client_address[0]
+        authorization = self.headers.get("authorization")
+        if authorization:
+            authorization = authorization.split()
+            if len(authorization) == 2:
+                import base64, binascii
+                env['AUTH_TYPE'] = authorization[0]
+                if authorization[0].lower() == "basic":
+                    try:
+                        authorization = authorization[1].encode('ascii')
+                        authorization = base64.decodebytes(authorization).\
+                                        decode('ascii')
+                    except (binascii.Error, UnicodeError):
+                        pass
+                    else:
+                        authorization = authorization.split(':')
+                        if len(authorization) == 2:
+                            env['REMOTE_USER'] = authorization[0]
+        # XXX REMOTE_IDENT
+        if self.headers.get('content-type') is None:
+            env['CONTENT_TYPE'] = self.headers.get_content_type()
+        else:
+            env['CONTENT_TYPE'] = self.headers['content-type']
+        length = self.headers.get('content-length')
+        if length:
+            env['CONTENT_LENGTH'] = length
+        referer = self.headers.get('referer')
+        if referer:
+            env['HTTP_REFERER'] = referer
+        accept = self.headers.get_all('accept', ())
+        env['HTTP_ACCEPT'] = ','.join(accept)
+        ua = self.headers.get('user-agent')
+        if ua:
+            env['HTTP_USER_AGENT'] = ua
+        co = filter(None, self.headers.get_all('cookie', []))
+        cookie_str = ', '.join(co)
+        if cookie_str:
+            env['HTTP_COOKIE'] = cookie_str
+        # XXX Other HTTP_* headers
+        # Since we're setting the env in the parent, provide empty
+        # values to override previously set values
+        for k in ('QUERY_STRING', 'REMOTE_HOST', 'CONTENT_LENGTH',
+                  'HTTP_USER_AGENT', 'HTTP_COOKIE', 'HTTP_REFERER'):
+            env.setdefault(k, "")
+
+        self.send_response(HTTPStatus.OK, "Script output follows")
+        self.flush_headers()
+
+        decoded_query = query.replace('+', ' ')
+
+        if self.have_fork:
+            # Unix -- fork as we should
+            args = [script]
+            if '=' not in decoded_query:
+                args.append(decoded_query)
+            nobody = nobody_uid()
+            self.wfile.flush() # Always flush before forking
+            pid = os.fork()
+            if pid != 0:
+                # Parent
+                pid, sts = os.waitpid(pid, 0)
+                # throw away additional data [see bug #427345]
+                while select.select([self.rfile], [], [], 0)[0]:
+                    if not self.rfile.read(1):
+                        break
+                exitcode = os.waitstatus_to_exitcode(sts)
+                if exitcode:
+                    self.log_error(f"CGI script exit code {exitcode}")
+                return
+            # Child
+            try:
+                try:
+                    os.setuid(nobody)
+                except OSError:
+                    pass
+                os.dup2(self.rfile.fileno(), 0)
+                os.dup2(self.wfile.fileno(), 1)
+                os.execve(scriptfile, args, env)
+            except:
+                self.server.handle_error(self.request, self.client_address)
+                os._exit(127)
+
+        else:
+            # Non-Unix -- use subprocess
+            import subprocess
+            cmdline = [scriptfile]
+            if self.is_python(scriptfile):
+                interp = sys.executable
+                if interp.lower().endswith("w.exe"):
+                    # On Windows, use python.exe, not pythonw.exe
+                    interp = interp[:-5] + interp[-4:]
+                cmdline = [interp, '-u'] + cmdline
+            if '=' not in query:
+                cmdline.append(query)
+            self.log_message("command: %s", subprocess.list2cmdline(cmdline))
+            try:
+                nbytes = int(length)
+            except (TypeError, ValueError):
+                nbytes = 0
+            p = subprocess.Popen(cmdline,
+                                 stdin=subprocess.PIPE,
+                                 stdout=subprocess.PIPE,
+                                 stderr=subprocess.PIPE,
+                                 env = env
+                                 )
+            if self.command.lower() == "post" and nbytes > 0:
+                cursize = 0
+                data = self.rfile.read(min(nbytes, _MIN_READ_BUF_SIZE))
+                while len(data) < nbytes and len(data) != cursize:
+                    cursize = len(data)
+                    # This is a geometric increase in read size (never more
+                    # than doubling out the current length of data per loop
+                    # iteration).
+                    delta = min(cursize, nbytes - cursize)
+                    try:
+                        data += self.rfile.read(delta)
+                    except TimeoutError:
+                        break
+            else:
+                data = None
+            # throw away additional data [see bug #427345]
+            while select.select([self.rfile._sock], [], [], 0)[0]:
+                if not self.rfile._sock.recv(1):
+                    break
+            stdout, stderr = p.communicate(data)
+            self.wfile.write(stdout)
+            if stderr:
+                self.log_error('%s', stderr)
+            p.stderr.close()
+            p.stdout.close()
+            status = p.returncode
+            if status:
+                self.log_error("CGI script exit status %#x", status)
+            else:
+                self.log_message("CGI script exited OK")
+
+
+def _get_best_family(*address):
+    infos = socket.getaddrinfo(
+        *address,
+        type=socket.SOCK_STREAM,
+        flags=socket.AI_PASSIVE,
+    )
+    family, type, proto, canonname, sockaddr = next(iter(infos))
+    return family, sockaddr
+
+
+def test(HandlerClass=BaseHTTPRequestHandler,
+         ServerClass=ThreadingHTTPServer,
+         protocol="HTTP/1.0", port=8000, bind=None,
+         tls_cert=None, tls_key=None, tls_password=None):
+    """Test the HTTP request handler class.
+
+    This runs an HTTP server on port 8000 (or the port argument).
+
+    """
+    ServerClass.address_family, addr = _get_best_family(bind, port)
+    HandlerClass.protocol_version = protocol
+
+    if tls_cert:
+        server = ServerClass(addr, HandlerClass, certfile=tls_cert,
+                             keyfile=tls_key, password=tls_password)
+    else:
+        server = ServerClass(addr, HandlerClass)
+
+    with server as httpd:
+        host, port = httpd.socket.getsockname()[:2]
+        url_host = f'[{host}]' if ':' in host else host
+        protocol = 'HTTPS' if tls_cert else 'HTTP'
+        print(
+            f"Serving {protocol} on {host} port {port} "
+            f"({protocol.lower()}://{url_host}:{port}/) ..."
+        )
+        try:
+            httpd.serve_forever()
+        except KeyboardInterrupt:
+            print("\nKeyboard interrupt received, exiting.")
+            sys.exit(0)
+
+if __name__ == '__main__':
+    import argparse
+    import contextlib
+
+    parser = argparse.ArgumentParser(color=True)
+    parser.add_argument('--cgi', action='store_true',
+                        help='run as CGI server')
+    parser.add_argument('-b', '--bind', metavar='ADDRESS',
+                        help='bind to this address '
+                             '(default: all interfaces)')
+    parser.add_argument('-d', '--directory', default=os.getcwd(),
+                        help='serve this directory '
+                             '(default: current directory)')
+    parser.add_argument('-p', '--protocol', metavar='VERSION',
+                        default='HTTP/1.0',
+                        help='conform to this HTTP version '
+                             '(default: %(default)s)')
+    parser.add_argument('--tls-cert', metavar='PATH',
+                        help='path to the TLS certificate chain file')
+    parser.add_argument('--tls-key', metavar='PATH',
+                        help='path to the TLS key file')
+    parser.add_argument('--tls-password-file', metavar='PATH',
+                        help='path to the password file for the TLS key')
+    parser.add_argument('port', default=8000, type=int, nargs='?',
+                        help='bind to this port '
+                             '(default: %(default)s)')
+    args = parser.parse_args()
+
+    if not args.tls_cert and args.tls_key:
+        parser.error("--tls-key requires --tls-cert to be set")
+
+    tls_key_password = None
+    if args.tls_password_file:
+        if not args.tls_cert:
+            parser.error("--tls-password-file requires --tls-cert to be set")
+
+        try:
+            with open(args.tls_password_file, "r", encoding="utf-8") as f:
+                tls_key_password = f.read().strip()
+        except OSError as e:
+            parser.error(f"Failed to read TLS password file: {e}")
+
+    if args.cgi:
+        handler_class = CGIHTTPRequestHandler
+    else:
+        handler_class = SimpleHTTPRequestHandler
+
+    # ensure dual-stack is not disabled; ref #38907
+    class DualStackServerMixin:
+
+        def server_bind(self):
+            # suppress exception when protocol is IPv4
+            with contextlib.suppress(Exception):
+                self.socket.setsockopt(
+                    socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)
+            return super().server_bind()
+
+        def finish_request(self, request, client_address):
+            self.RequestHandlerClass(request, client_address, self,
+                                     directory=args.directory)
+
+    class HTTPDualStackServer(DualStackServerMixin, ThreadingHTTPServer):
+        pass
+    class HTTPSDualStackServer(DualStackServerMixin, ThreadingHTTPSServer):
+        pass
+
+    ServerClass = HTTPSDualStackServer if args.tls_cert else HTTPDualStackServer
+
+    test(
+        HandlerClass=handler_class,
+        ServerClass=ServerClass,
+        port=args.port,
+        bind=args.bind,
+        protocol=args.protocol,
+        tls_cert=args.tls_cert,
+        tls_key=args.tls_key,
+        tls_password=tls_key_password,
+    )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/CREDITS.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/CREDITS.txt
new file mode 100644
index 0000000000000000000000000000000000000000..1b853e8cc1c4621695cc37a32a40eaae2396c62b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/CREDITS.txt
@@ -0,0 +1,48 @@
+Guido van Rossum, as well as being the creator of the Python language, is the
+original creator of IDLE.  Other contributors prior to Version 0.8 include
+Mark Hammond, Jeremy Hylton, Tim Peters, and Moshe Zadka.
+
+Until Python 2.3, IDLE's development was carried out in the SF IDLEfork project. The
+objective was to develop a version of IDLE which had an execution environment
+which could be initialized prior to each run of user code.
+IDLefork was merged into the Python code base in 2003.
+
+The IDLEfork project was initiated by David Scherer, with some help from Peter
+Schneider-Kamp and Nicholas Riley.  David wrote the first version of the RPC
+code and designed a fast turn-around environment for VPython.  Guido developed
+the RPC code and Remote Debugger currently integrated in IDLE.  Bruce Sherwood
+contributed considerable time testing and suggesting improvements.
+
+Besides David and Guido, the main developers who were active on IDLEfork
+are Stephen M. Gava, who implemented the configuration GUI, the new
+configuration system, and the About dialog, and Kurt B. Kaiser, who completed
+the integration of the RPC and remote debugger, implemented the threaded
+subprocess, and made a number of usability enhancements.
+
+Other contributors include Raymond Hettinger, Tony Lownds (Mac integration),
+Neal Norwitz (code check and clean-up), Ronald Oussoren (Mac integration),
+Noam Raphael (Code Context, Call Tips, many other patches), and Chui Tey (RPC
+integration, debugger integration and persistent breakpoints).
+
+Scott David Daniels, Tal Einat, Hernan Foffani, Christos Georgiou,
+Jim Jewett, Martin v. Löwis, Jason Orendorff, Guilherme Polo, Josh Robb,
+Nigel Rowe, Bruce Sherwood, Jeff Shute, and Weeble have submitted useful
+patches.  Thanks, guys!
+
+Major contributors since 2005:
+
+- 2005: Tal Einat
+- 2010: Terry Jan Reedy (current maintainer)
+- 2013: Roger Serwy
+- 2014: Saimadhav Heblikar
+- 2015: Mark Roseman
+- 2017: Louie Lu, Cheryl Sabella, and Serhiy Storchaka
+- 2025: Stan Ulbrych
+
+For additional details refer to NEWS.txt and Changelog.
+
+If we missed you, feel free to submit a PR with a summary of
+contributions (for instance, at least 5 merged PRs).
+
+
+
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/ChangeLog b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/ChangeLog
new file mode 100644
index 0000000000000000000000000000000000000000..c8960cfa535d03464b2471e62b6712fafe76f10c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/ChangeLog
@@ -0,0 +1,1591 @@
+Please refer to the IDLEfork and IDLE CVS repositories for
+change details subsequent to the 0.8.1 release.
+
+
+IDLEfork ChangeLog
+==================
+
+2001-07-20 11:35  elguavas
+
+	* README.txt, NEWS.txt: bring up to date for 0.8.1 release
+
+2001-07-19 16:40  elguavas
+
+	* IDLEFORK.html: replaced by IDLEFORK-index.html
+
+2001-07-19 16:39  elguavas
+
+	* IDLEFORK-index.html: updated placeholder idlefork homepage
+
+2001-07-19 14:49  elguavas
+
+	* ChangeLog, EditorWindow.py, INSTALLATION, NEWS.txt, README.txt,
+	TODO.txt, idlever.py:
+	minor tidy-ups ready for 0.8.1 alpha tarball release
+
+2001-07-17 15:12  kbk
+
+	* INSTALLATION, setup.py: INSTALLATION: Remove the coexist.patch
+	instructions
+
+	**************** setup.py:
+
+	Remove the idles script, add some words on IDLE Fork to the
+	long_description, and clean up some line spacing.
+
+2001-07-17 15:01  kbk
+
+	* coexist.patch: Put this in the attic, at least for now...
+
+2001-07-17 14:59  kbk
+
+	* PyShell.py, idle, idles: Implement idle command interface as
+	suggested by GvR [idle-dev] 16 July **************** PyShell: Added
+	functionality:
+
+	usage: idle.py [-c command] [-d] [-i] [-r script] [-s] [-t title]
+	[arg] ...
+
+	idle file(s)	(without options) edit the file(s)
+
+	-c cmd	   run the command in a shell -d	 enable the
+	debugger -i	    open an interactive shell -i file(s) open a
+	shell and also an editor window for each file -r script  run a file
+	as a script in a shell -s	  run $IDLESTARTUP or
+	$PYTHONSTARTUP before anything else -t title   set title of shell
+	window
+
+	Remaining arguments are applied to the command (-c) or script (-r).
+
+	****************** idles: Removed the idles script, not needed
+
+	****************** idle:  Removed the IdleConf references, not
+	required anymore
+
+2001-07-16 17:08  kbk
+
+	* INSTALLATION, coexist.patch: Added installation instructions.
+
+	Added a patch which modifies idlefork so that it can co-exist with
+	"official" IDLE in the site-packages directory. This patch is not
+	necessary if only idlefork IDLE is installed. See INSTALLATION for
+	further details.
+
+2001-07-16 15:50  kbk
+
+	* idles: Add a script "idles" which opens a Python Shell window.
+
+	The default behaviour of idlefork idle is to open an editor window
+	instead of a shell. Complex expressions may be run in a fresh
+	environment by selecting "run".  There are times, however, when a
+	shell is desired.  Though one can be started by "idle -t 'foo'",
+	this script is more convenient.  In addition, a shell and an editor
+	window can be started in parallel by "idles -e foo.py".
+
+2001-07-16 15:25  kbk
+
+	* PyShell.py: Call out IDLE Fork in startup message.
+
+2001-07-16 14:00  kbk
+
+	* PyShell.py, setup.py: Add a script "idles" which opens a Python
+	Shell window.
+
+	The default behaviour of idlefork idle is to open an editor window
+	instead of a shell. Complex expressions may be run in a fresh
+	environment by selecting "run".  There are times, however, when a
+	shell is desired.  Though one can be started by "idle -t 'foo'",
+	this script is more convenient.  In addition, a shell and an editor
+	window can be started in parallel by "idles -e foo.py".
+
+2001-07-15 03:06  kbk
+
+	* pyclbr.py, tabnanny.py: tabnanny and pyclbr are now found in /Lib
+
+2001-07-15 02:29  kbk
+
+	* BrowserControl.py: Remove, was retained for 1.5.2 support
+
+2001-07-14 15:48  kbk
+
+	* setup.py: Installing Idle to site-packages via Distutils does not
+	copy the Idle help.txt file.
+
+	Ref SF Python Patch 422471
+
+2001-07-14 15:26  kbk
+
+	* keydefs.py: py-cvs-2001_07_13 (Rev 1.3) merge
+
+	"Make copy, cut and paste events case insensitive.  Reported by
+	Patrick K. O'Brien on idle-dev. (Should other bindings follow
+	suit?)" --GvR
+
+2001-07-14 15:21  kbk
+
+	* idle.py: py-cvs-2001_07_13 (Rev 1.4) merge
+
+	"Move the action of loading the configuration to the IdleConf
+	module rather than the idle.py script.	This has advantages and
+	disadvantages; the biggest advantage being that we can more easily
+	have an alternative main program."  --GvR
+
+2001-07-14 15:18  kbk
+
+	* extend.txt: py-cvs-2001_07_13 (Rev 1.4) merge
+
+	"Quick update to the extension mechanism (extend.py is gone, long
+	live config.txt)" --GvR
+
+2001-07-14 15:15  kbk
+
+	* StackViewer.py: py-cvs-2001_07_13 (Rev 1.16) merge
+
+	"Refactored, with some future plans in mind. This now uses the new
+	gotofileline() method defined in FileList.py"  --GvR
+
+2001-07-14 15:10  kbk
+
+	* PyShell.py: py-cvs-2001_07_13 (Rev 1.34) merge
+
+	"Amazing.  A very subtle change in policy in descr-branch actually
+	found a bug here.  Here's the deal: Class PyShell derives from
+	class OutputWindow.  Method PyShell.close() wants to invoke its
+	parent method, but because PyShell long ago was inherited from
+	class PyShellEditorWindow, it invokes
+	PyShelEditorWindow.close(self).  Now, class PyShellEditorWindow
+	itself derives from class OutputWindow, and inherits the close()
+	method from there without overriding it.  Under the old rules,
+	PyShellEditorWindow.close would return an unbound method restricted
+	to the class that defined the implementation of close(), which was
+	OutputWindow.close.  Under the new rules, the unbound method is
+	restricted to the class whose method was requested, that is
+	PyShellEditorWindow, and this was correctly trapped as an error."
+	--GvR
+
+2001-07-14 14:59  kbk
+
+	* PyParse.py: py-cvs-2001_07_13 (Rel 1.9) merge
+
+	"Taught IDLE's autoident parser that "yield" is a keyword that
+	begins a stmt.	Along w/ the preceding change to keyword.py, making
+	all this work w/ a future-stmt just looks harder and harder."
+	--tim_one
+
+	(From Rel 1.8: "Hack to make this still work with Python 1.5.2.
+	;-( " --fdrake)
+
+2001-07-14 14:51  kbk
+
+	* IdleConf.py: py-cvs-2001_07_13 (Rel 1.7) merge
+
+	"Move the action of loading the configuration to the IdleConf
+	module rather than the idle.py script.	This has advantages and
+	disadvantages; the biggest advantage being that we can more easily
+	have an alternative main program." --GvR
+
+2001-07-14 14:45  kbk
+
+	* FileList.py: py-cvs-2000_07_13 (Rev 1.9) merge
+
+	"Delete goodname() method, which is unused. Add gotofileline(), a
+	convenience method which I intend to use in a variant. Rename
+	test() to _test()."  --GvR
+
+	This was an interesting merge. The join completely missed removing
+	goodname(), which was adjacent, but outside of, a small conflict.
+	I only caught it by comparing the 1.1.3.2/1.1.3.3 diff.  CVS ain't
+	infallible.
+
+2001-07-14 13:58  kbk
+
+	* EditorWindow.py: py-cvs-2000_07_13 (Rev 1.38) merge "Remove
+	legacy support for the BrowserControl module; the webbrowser module
+	has been included since Python 2.0, and that is the preferred
+	interface." --fdrake
+
+2001-07-14 13:32  kbk
+
+	* EditorWindow.py, FileList.py, IdleConf.py, PyParse.py,
+	PyShell.py, StackViewer.py, extend.txt, idle.py, keydefs.py: Import
+	the 2001 July 13 23:59 GMT version of Python CVS IDLE on the
+	existing 1.1.3 vendor branch named py-cvs-vendor-branch. Release
+	tag is py-cvs-2001_07_13.
+
+2001-07-14 12:02  kbk
+
+	* Icons/python.gif: py-cvs-rel2_1 (Rev 1.2) merge Copied py-cvs rev
+	1.2 changed file to idlefork MAIN
+
+2001-07-14 11:58  kbk
+
+	* Icons/minusnode.gif: py-cvs-rel2_1 (Rev 1.2) merge Copied py-cvs
+	1.2 changed file to idlefork MAIN
+
+2001-07-14 11:23  kbk
+
+	* ScrolledList.py: py-cvs-rel2_1 (rev 1.5) merge - whitespace
+	normalization
+
+2001-07-14 11:20  kbk
+
+	* Separator.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
+	normalization
+
+2001-07-14 11:16  kbk
+
+	* StackViewer.py: py-cvs-rel2_1 (Rev 1.15) merge - whitespace
+	normalization
+
+2001-07-14 11:14  kbk
+
+	* ToolTip.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
+	normalization
+
+2001-07-14 10:13  kbk
+
+	* PyShell.py: cvs-py-rel2_1 (Rev 1.29 - 1.33) merge
+
+	Merged the following py-cvs revs without conflict: 1.29 Reduce
+	copyright text output at startup 1.30 Delay setting sys.args until
+	Tkinter is fully initialized 1.31 Whitespace normalization 1.32
+	Turn syntax warning into error when interactive 1.33 Fix warning
+	initialization bug
+
+	Note that module is extensively modified wrt py-cvs
+
+2001-07-14 06:33  kbk
+
+	* PyParse.py: py-cvs-rel2_1 (Rev 1.6 - 1.8) merge Fix autoindent
+	bug and deflect Unicode from text.get()
+
+2001-07-14 06:00  kbk
+
+	* Percolator.py: py-cvs-rel2_1 (Rev 1.3) "move "from Tkinter import
+	*" to module level" --jhylton
+
+2001-07-14 05:57  kbk
+
+	* PathBrowser.py: py-cvs-rel2_1 (Rev 1.6) merge - whitespace
+	normalization
+
+2001-07-14 05:49  kbk
+
+	* ParenMatch.py: cvs-py-rel2_1 (Rev 1.5) merge - whitespace
+	normalization
+
+2001-07-14 03:57  kbk
+
+	* ObjectBrowser.py: py-cvs-rel2_1 (Rev 1.3) merge "Make the test
+	program work outside IDLE."  -- GvR
+
+2001-07-14 03:52  kbk
+
+	* MultiStatusBar.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
+	normalization
+
+2001-07-14 03:44  kbk
+
+	* MultiScrolledLists.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
+	normalization
+
+2001-07-14 03:40  kbk
+
+	* IdleHistory.py: py-cvs-rel2_1 (Rev 1.4) merge - whitespace
+	normalization
+
+2001-07-14 03:38  kbk
+
+	* IdleConf.py: py-cvs-rel2_1 (Rev 1.6) merge - whitespace
+	normalization
+
+2001-07-13 14:18  kbk
+
+	* IOBinding.py: py-cvs-rel2_1 (Rev 1.4) merge - move "import *" to
+	module level
+
+2001-07-13 14:12  kbk
+
+	* FormatParagraph.py: py-cvs-rel2_1 (Rev 1.9) merge - whitespace
+	normalization
+
+2001-07-13 14:07  kbk
+
+	* FileList.py: py-cvs-rel2_1 (Rev 1.8) merge - whitespace
+	normalization
+
+2001-07-13 13:35  kbk
+
+	* EditorWindow.py: py-cvs-rel2_1 (Rev 1.33 - 1.37) merge
+
+	VP IDLE version depended on VP's ExecBinding.py and spawn.py to get
+	the path to the Windows Doc directory (relative to python.exe).
+	Removed this conflicting code in favor of py-cvs updates which on
+	Windows use a hard coded path relative to the location of this
+	module. py-cvs updates include support for webbrowser.py.  Module
+	still has BrowserControl.py for 1.5.2 support.
+
+	At this point, the differences wrt py-cvs relate to menu
+	functionality.
+
+2001-07-13 11:30  kbk
+
+	* ConfigParser.py: py-cvs-rel2_1 merge - Remove, lives in /Lib
+
+2001-07-13 10:10  kbk
+
+	* Delegator.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
+	normalization
+
+2001-07-13 10:07  kbk
+
+	* Debugger.py: py-cvs-rel2_1 (Rev 1.15) merge - whitespace
+	normalization
+
+2001-07-13 10:04  kbk
+
+	* ColorDelegator.py: py-cvs-rel2_1 (Rev 1.11 and 1.12) merge
+	Colorize "as" after "import" / use DEBUG instead of __debug__
+
+2001-07-13 09:54  kbk
+
+	* ClassBrowser.py: py-cvs-rel2_1 (Rev 1.12) merge - whitespace
+	normalization
+
+2001-07-13 09:41  kbk
+
+	* BrowserControl.py: py-cvs-rel2_1 (Rev 1.1) merge - New File -
+	Force HEAD to trunk with -f Note: browser.py was renamed
+	BrowserControl.py 10 May 2000. It provides a collection of classes
+	and convenience functions to control external browsers "for 1.5.2
+	support". It was removed from py-cvs 18 April 2001.
+
+2001-07-13 09:10  kbk
+
+	* CallTips.py: py-cvs-rel2_1 (Rev 1.8) merge - whitespace
+	normalization
+
+2001-07-13 08:26  kbk
+
+	* CallTipWindow.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
+	normalization
+
+2001-07-13 08:13  kbk
+
+	* AutoExpand.py: py-cvs-rel1_2 (Rev 1.4) merge, "Add Alt-slash to
+	Unix keydefs (I somehow need it on RH 6.2).  Get rid of assignment
+	to unused self.text.wordlist."	--GvR
+
+2001-07-12 16:54  elguavas
+
+	* ReplaceDialog.py: py-cvs merge, python 1.5.2 compatibility
+
+2001-07-12 16:46  elguavas
+
+	* ScriptBinding.py: py-cvs merge, better error dialog
+
+2001-07-12 16:38  elguavas
+
+	* TODO.txt: py-cvs merge, additions
+
+2001-07-12 15:35  elguavas
+
+	* WindowList.py: py-cvs merge, correct indentation
+
+2001-07-12 15:24  elguavas
+
+	* config.txt: py-cvs merge, correct typo
+
+2001-07-12 15:21  elguavas
+
+	* help.txt: py-cvs merge, update colour changing info
+
+2001-07-12 14:51  elguavas
+
+	* idle.py: py-cvs merge, idle_dir loading changed
+
+2001-07-12 14:44  elguavas
+
+	* idlever.py: py-cvs merge, version update
+
+2001-07-11 12:53  kbk
+
+	* BrowserControl.py: Initial revision
+
+2001-07-11 12:53  kbk
+
+	* AutoExpand.py, BrowserControl.py, CallTipWindow.py, CallTips.py,
+	ClassBrowser.py, ColorDelegator.py, Debugger.py, Delegator.py,
+	EditorWindow.py, FileList.py, FormatParagraph.py, IOBinding.py,
+	IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
+	MultiStatusBar.py, ObjectBrowser.py, OutputWindow.py,
+	ParenMatch.py, PathBrowser.py, Percolator.py, PyParse.py,
+	PyShell.py, RemoteInterp.py, ReplaceDialog.py, ScriptBinding.py,
+	ScrolledList.py, Separator.py, StackViewer.py, TODO.txt,
+	ToolTip.py, WindowList.py, config.txt, help.txt, idle, idle.bat,
+	idle.py, idlever.py, setup.py, Icons/minusnode.gif,
+	Icons/python.gif: Import the release 2.1 version of Python CVS IDLE
+	on the existing 1.1.3 vendor branch named py-cvs-vendor-branch,
+	with release tag py-cvs-rel2_1.
+
+2001-07-11 12:34  kbk
+
+	* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
+	CallTips.py, ChangeLog, ClassBrowser.py, ColorDelegator.py,
+	Debugger.py, Delegator.py, EditorWindow.py, FileList.py,
+	FormatParagraph.py, FrameViewer.py, GrepDialog.py, IOBinding.py,
+	IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
+	MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
+	OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
+	PyParse.py, PyShell.py, README.txt, RemoteInterp.py,
+	ReplaceDialog.py, ScriptBinding.py, ScrolledList.py,
+	SearchBinding.py, SearchDialog.py, SearchDialogBase.py,
+	SearchEngine.py, Separator.py, StackViewer.py, TODO.txt,
+	ToolTip.py, TreeWidget.py, UndoDelegator.py, WidgetRedirector.py,
+	WindowList.py, ZoomHeight.py, __init__.py, config-unix.txt,
+	config-win.txt, config.txt, eventparse.py, extend.txt, help.txt,
+	idle.bat, idle.py, idle.pyw, idlever.py, keydefs.py, pyclbr.py,
+	tabnanny.py, testcode.py, Icons/folder.gif, Icons/minusnode.gif,
+	Icons/openfolder.gif, Icons/plusnode.gif, Icons/python.gif,
+	Icons/tk.gif: Import the 9 March 2000 version of Python CVS IDLE as
+	1.1.3 vendor branch named py-cvs-vendor-branch.
+
+2001-07-04 13:43  kbk
+
+	* Icons/: folder.gif, minusnode.gif, openfolder.gif, plusnode.gif,
+	python.gif, tk.gif: Null commit with -f option to force an uprev
+	and put HEADs firmly on the trunk.
+
+2001-07-04 13:15  kbk
+
+	* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
+	CallTips.py, ChangeLog, ClassBrowser.py, ColorDelegator.py,
+	ConfigParser.py, Debugger.py, Delegator.py, EditorWindow.py,
+	ExecBinding.py, FileList.py, FormatParagraph.py, FrameViewer.py,
+	GrepDialog.py, IDLEFORK.html, IOBinding.py, IdleConf.py,
+	IdleHistory.py, MultiScrolledLists.py, MultiStatusBar.py, NEWS.txt,
+	ObjectBrowser.py, OldStackViewer.py, OutputWindow.py,
+	ParenMatch.py, PathBrowser.py, Percolator.py, PyParse.py,
+	PyShell.py, README.txt, Remote.py, RemoteInterp.py,
+	ReplaceDialog.py, ScriptBinding.py, ScrolledList.py,
+	SearchBinding.py, SearchDialog.py, SearchDialogBase.py,
+	SearchEngine.py, Separator.py, StackViewer.py, TODO.txt,
+	ToolTip.py, TreeWidget.py, UndoDelegator.py, WidgetRedirector.py,
+	WindowList.py, ZoomHeight.py, __init__.py, config-unix.txt,
+	config-win.txt, config.txt, eventparse.py, extend.txt, help.txt,
+	idle, idle.bat, idle.py, idle.pyw, idlever.py, keydefs.py,
+	loader.py, protocol.py, pyclbr.py, setup.py, spawn.py, tabnanny.py,
+	testcode.py: Null commit with -f option to force an uprev and put
+	HEADs firmly on the trunk.
+
+2001-06-27 10:24  elguavas
+
+	* IDLEFORK.html: updated contact details
+
+2001-06-25 17:23  elguavas
+
+	* idle, RemoteInterp.py, setup.py: Initial revision
+
+2001-06-25 17:23  elguavas
+
+	* idle, RemoteInterp.py, setup.py: import current python cvs idle
+	as a vendor branch
+
+2001-06-24 15:10  elguavas
+
+	* IDLEFORK.html: tiny change to test new syncmail setup
+
+2001-06-24 14:41  elguavas
+
+	* IDLEFORK.html: change to new developer contact, also a test
+	commit for new syncmail setup
+
+2001-06-23 18:15  elguavas
+
+	* IDLEFORK.html: tiny test update for revitalised idle-fork
+
+2000-09-24 17:29  nriley
+
+	* protocol.py: Fixes for Python 1.6 compatibility - socket bind and
+	connect get a tuple instead two arguments.
+
+2000-09-24 17:28  nriley
+
+	* spawn.py: Change for Python 1.6 compatibility - UNIX's 'os'
+	module defines 'spawnv' now, so we check for 'fork' first.
+
+2000-08-15 22:51  nowonder
+
+	* IDLEFORK.html:
+	corrected email address
+
+2000-08-15 22:47  nowonder
+
+	* IDLEFORK.html:
+	added .html file for http://idlefork.sourceforge.net
+
+2000-08-15 11:13  dscherer
+
+	* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
+	CallTips.py, __init__.py, ChangeLog, ClassBrowser.py,
+	ColorDelegator.py, ConfigParser.py, Debugger.py, Delegator.py,
+	FileList.py, FormatParagraph.py, FrameViewer.py, GrepDialog.py,
+	IOBinding.py, IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
+	MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
+	OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
+	PyParse.py, PyShell.py, README.txt, ReplaceDialog.py,
+	ScriptBinding.py, ScrolledList.py, SearchBinding.py,
+	SearchDialog.py, SearchDialogBase.py, SearchEngine.py,
+	Separator.py, StackViewer.py, TODO.txt, ToolTip.py, TreeWidget.py,
+	UndoDelegator.py, WidgetRedirector.py, WindowList.py, help.txt,
+	ZoomHeight.py, config-unix.txt, config-win.txt, config.txt,
+	eventparse.py, extend.txt, idle.bat, idle.py, idle.pyw, idlever.py,
+	keydefs.py, loader.py, pyclbr.py, tabnanny.py, testcode.py,
+	EditorWindow.py, ExecBinding.py, Remote.py, protocol.py, spawn.py,
+	Icons/folder.gif, Icons/minusnode.gif, Icons/openfolder.gif,
+	Icons/plusnode.gif, Icons/python.gif, Icons/tk.gif: Initial
+	revision
+
+2000-08-15 11:13  dscherer
+
+	* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
+	CallTips.py, __init__.py, ChangeLog, ClassBrowser.py,
+	ColorDelegator.py, ConfigParser.py, Debugger.py, Delegator.py,
+	FileList.py, FormatParagraph.py, FrameViewer.py, GrepDialog.py,
+	IOBinding.py, IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
+	MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
+	OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
+	PyParse.py, PyShell.py, README.txt, ReplaceDialog.py,
+	ScriptBinding.py, ScrolledList.py, SearchBinding.py,
+	SearchDialog.py, SearchDialogBase.py, SearchEngine.py,
+	Separator.py, StackViewer.py, TODO.txt, ToolTip.py, TreeWidget.py,
+	UndoDelegator.py, WidgetRedirector.py, WindowList.py, help.txt,
+	ZoomHeight.py, config-unix.txt, config-win.txt, config.txt,
+	eventparse.py, extend.txt, idle.bat, idle.py, idle.pyw, idlever.py,
+	keydefs.py, loader.py, pyclbr.py, tabnanny.py, testcode.py,
+	EditorWindow.py, ExecBinding.py, Remote.py, protocol.py, spawn.py,
+	Icons/folder.gif, Icons/minusnode.gif, Icons/openfolder.gif,
+	Icons/plusnode.gif, Icons/python.gif, Icons/tk.gif: Modified IDLE
+	from VPython 0.2
+
+
+original IDLE ChangeLog:
+========================
+
+Tue Feb 15 18:08:19 2000  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* NEWS.txt: Notice status bar and stack viewer.
+
+	* EditorWindow.py: Support for Moshe's status bar.
+
+	* MultiStatusBar.py: Status bar code -- by Moshe Zadka.
+
+	* OldStackViewer.py:
+	Adding the old stack viewer implementation back, for the debugger.
+
+	* StackViewer.py: New stack viewer, uses a tree widget.
+	(XXX: the debugger doesn't yet use this.)
+
+	* WindowList.py:
+	Correct a typo and remove an unqualified except that was hiding the error.
+
+	* ClassBrowser.py: Add an XXX comment about the ClassBrowser AIP.
+
+	* ChangeLog: Updated change log.
+
+	* NEWS.txt: News update.  Probably incomplete; what else is new?
+
+	* README.txt:
+	Updated for pending IDLE 0.5 release (still very rough -- just getting
+	it out in a more convenient format than CVS).
+
+	* TODO.txt: Tiny addition.
+
+Thu Sep  9 14:16:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TODO.txt: A few new TODO entries.
+
+Thu Aug 26 23:06:22 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Bindings.py: Add Python Documentation entry to Help menu.
+
+	* EditorWindow.py:
+	Find the help.txt file relative to __file__ or ".", not in sys.path.
+	(Suggested by Moshe Zadka, but implemented differently.)
+
+	Add <<python-docs>> event which, on Unix, brings up Netscape pointing
+	to http://www.python.doc/current/ (a local copy would be nice but its
+	location can't be predicted).  Windows solution TBD.
+
+Wed Aug 11 14:55:43 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TreeWidget.py:
+	Moshe noticed an inconsistency in his comment, so I'm rephrasing it to
+	be clearer.
+
+	* TreeWidget.py:
+	Patch inspired by Moshe Zadka to search for the Icons directory in the
+	same directory as __file__, rather than searching for it along sys.path.
+	This works better when idle is a package.
+
+Thu Jul 15 13:11:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TODO.txt: New wishes.
+
+Sat Jul 10 13:17:35 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* IdlePrefs.py:
+	Make the color for stderr red (i.e. the standard warning/danger/stop
+	color) rather than green.  Suggested by Sam Schulenburg.
+
+Fri Jun 25 17:26:34 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* PyShell.py: Close debugger when closing.  This may break a cycle.
+
+	* Debugger.py: Break cycle on close.
+
+	* ClassBrowser.py: Destroy the tree when closing.
+
+	* TreeWidget.py: Add destroy() method to recursively destroy a tree.
+
+	* PyShell.py: Extend _close() to break cycles.
+	Break some other cycles too (and destroy the root when done).
+
+	* EditorWindow.py:
+	Add _close() method that does the actual cleanup (close() asks the
+	user what they want first if there's unsaved stuff, and may cancel).
+	It closes more than before.
+
+	Add unload_extensions() method to unload all extensions; called from
+	_close().  It calls an extension's close() method if it has one.
+
+	* Percolator.py: Add close() method that breaks cycles.
+
+	* WidgetRedirector.py: Add unregister() method.
+	Unregister everything at closing.
+	Don't call close() in __del__, rely on explicit call to close().
+
+	* IOBinding.py, FormatParagraph.py, CallTips.py:
+	Add close() method that breaks a cycle.
+
+Fri Jun 11 15:03:00 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* AutoIndent.py, EditorWindow.py, FormatParagraph.py:
+	Tim Peters smart.patch:
+
+	EditorWindow.py:
+
+	+ Added get_tabwidth & set_tabwidth "virtual text" methods, that get/set the
+	widget's view of what a tab means.
+
+	+ Moved TK_TABWIDTH_DEFAULT here from AutoIndent.
+
+	+ Renamed Mark's get_selection_index to get_selection_indices (sorry, Mark,
+	but the name was plain wrong <wink>).
+
+	FormatParagraph.py:  renamed use of get_selection_index.
+
+	AutoIndent.py:
+
+	+ Moved TK_TABWIDTH_DEFAULT to EditorWindow.
+
+	+ Rewrote set_indentation_params to use new VTW get/set_tabwidth methods.
+
+	+ Changed smart_backspace_event to delete whitespace back to closest
+	preceding virtual tab stop or real character (note that this may require
+	inserting characters if backspacing over a tab!).
+
+	+ Nuked almost references to the selection tag, in favor of using
+	get_selection_indices.  The sole exception is in set_region, for which no
+	"set_selection" abstraction has yet been agreed upon.
+
+	+ Had too much fun using the spiffy new features of the format-paragraph
+	cmd.
+
+Thu Jun 10 17:48:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* FormatParagraph.py:
+	Code by Mark Hammond to format paragraphs embedded in comments.
+	Read the comments (which I reformatted using the new feature :-)
+	for some limitations.
+
+	* EditorWindow.py:
+	Added abstraction get_selection_index() (Mark Hammond).  Also
+	reformatted some comment blocks to show off a cool feature I'm about
+	to check in next.
+
+	* ClassBrowser.py:
+	Adapt to the new pyclbr's support of listing top-level functions.  If
+	this functionality is not present (e.g. when used with a vintage
+	Python 1.5.2 installation) top-level functions are not listed.
+
+	(Hmm...  Any distribution of IDLE 0.5 should probably include a copy
+	of the new pyclbr.py!)
+
+	* AutoIndent.py:
+	Fix off-by-one error in Tim's recent change to comment_region(): the
+	list of lines returned by get_region() contains an empty line at the
+	end representing the start of the next line, and this shouldn't be
+	commented out!
+
+	* CallTips.py:
+	Mark Hammond writes: Here is another change that allows it to work for
+	class creation - tries to locate an __init__ function.  Also updated
+	the test code to reflect your new "***" change.
+
+	* CallTipWindow.py:
+	Mark Hammond writes: Tim's suggestion of copying the font for the
+	CallTipWindow from the text control makes sense, and actually makes
+	the control look better IMO.
+
+Wed Jun  9 20:34:57 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* CallTips.py:
+	Append "..." if the appropriate flag (for varargs) in co_flags is set.
+	Ditto "***" for kwargs.
+
+Tue Jun  8 13:06:07 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ReplaceDialog.py:
+	Hmm...  Tim didn't turn "replace all" into a single undo block.
+	I think I like it better if it os, so here.
+
+	* ReplaceDialog.py: Tim Peters: made replacement atomic for undo/redo.
+
+	* AutoIndent.py: Tim Peters:
+
+	+ Set usetabs=1.  Editing pyclbr.py was driving me nuts <0.6 wink>.
+	usetabs=1 is the Emacs pymode default too, and thanks to indentwidth !=
+	tabwidth magical usetabs disabling, new files are still created with tabs
+	turned off.  The only implication is that if you open a file whose first
+	indent is a single tab, IDLE will now magically use tabs for that file (and
+	set indentwidth to 8).  Note that the whole scheme doesn't work right for
+	PythonWin, though, since Windows users typically set tabwidth to 4; Mark
+	probably has to hide the IDLE algorithm from them (which he already knows).
+
+	+ Changed comment_region_event to stick "##" in front of every line.  The
+	"holes" previously left on blank lines were visually confusing (made it
+	needlessly hard to figure out what to uncomment later).
+
+Mon Jun  7 15:38:40 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TreeWidget.py, ObjectBrowser.py:
+	Remove unnecessary reference to pyclbr from test() code.
+
+	* PyParse.py: Tim Peters:
+
+	Smarter logic for finding a parse synch point.
+
+	Does a half to a fifth the work in normal cases; don't notice the speedup,
+	but makes  more breathing room for other extensions.
+
+	Speeds terrible cases by at least a factor of 10. "Terrible" == e.g. you put
+	""" at the start of Tkinter.py, undo it, zoom to the bottom, and start
+	typing in code.  Used to take about 8 seconds for ENTER to respond, now some
+	large fraction of a second.  The new code gets indented correctly, despite
+	that it all remains "string colored" until the colorizer catches up (after
+	which, ENTER appears instantaneous again).
+
+Fri Jun  4 19:21:19 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* extend.py: Might as well enable CallTips by default.
+	If there are too many complaints I'll remove it again or fix it.
+
+Thu Jun  3 14:32:16 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* AutoIndent.py, EditorWindow.py, PyParse.py:
+	New offerings by Tim Peters; he writes:
+
+	IDLE is now the first Python editor in the Universe not confused by my
+	doctest.py <wink>.
+
+	As threatened, this defines IDLE's is_char_in_string function as a
+	method of EditorWindow.  You just need to define one similarly in
+	whatever it is you pass as editwin to AutoIndent; looking at the
+	EditorWindow.py part of the patch should make this clear.
+
+	* GrepDialog.py: Enclose pattern in quotes in status message.
+
+	* CallTips.py:
+	Mark Hammond fixed some comments and improved the way the tip text is
+	constructed.
+
+Wed Jun  2 18:18:57 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* CallTips.py:
+	My fix to Mark's code: restore the universal check on <KeyRelease>.
+	Always cancel on <Key-Escape> or <ButtonPress>.
+
+	* CallTips.py:
+	A version that Mark Hammond posted to the newsgroup.  Has some newer
+	stuff for getting the tip.  Had to fix the Key-( and Key-) events
+	for Unix.  Will have to re-apply my patch for catching KeyRelease and
+	ButtonRelease events.
+
+	* CallTipWindow.py, CallTips.py:
+	Call tips by Mark Hammond (plus tiny fix by me.)
+
+	* IdleHistory.py:
+	Changes by Mark Hammond: (1) support optional output_sep argument to
+	the constructor so he can eliminate the sys.ps2 that PythonWin leaves
+	in the source; (2) remove duplicate history items.
+
+	* AutoIndent.py:
+	Changes by Mark Hammond to allow using IDLE extensions in PythonWin as
+	well: make three dialog routines instance variables.
+
+	* EditorWindow.py:
+	Change by Mark Hammond to allow using IDLE extensions in PythonWin as
+	well: make three dialog routines instance variables.
+
+Tue Jun  1 20:06:44 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* AutoIndent.py: Hah!  A fix of my own to Tim's code!
+	Unix bindings for <<toggle-tabs>> and <<change-indentwidth>> were
+	missing, and somehow that meant the events were never generated,
+	even though they were in the menu.  The new Unix bindings are now
+	the same as the Windows bindings (M-t and M-u).
+
+	* AutoIndent.py, PyParse.py, PyShell.py: Tim Peters again:
+
+	The new version (attached) is fast enough all the time in every real module
+	I have <whew!>.  You can make it slow by, e.g., creating an open list with
+	5,000 90-character identifiers (+ trailing comma) each on its own line, then
+	adding an item to the end -- but that still consumes less than a second on
+	my P5-166.  Response time in real code appears instantaneous.
+
+	Fixed some bugs.
+
+	New feature:  when hitting ENTER and the cursor is beyond the line's leading
+	indentation, whitespace is removed on both sides of the cursor; before
+	whitespace was removed only on the left; e.g., assuming the cursor is
+	between the comma and the space:
+
+	def something(arg1, arg2):
+	                   ^ cursor to the left of here, and hit ENTER
+	               arg2):   # new line used to end up here
+	              arg2):    # but now lines up the way you expect
+
+	New hack:  AutoIndent has grown a context_use_ps1 Boolean config option,
+	defaulting to 0 (false) and set to 1 (only) by PyShell.  Reason:  handling
+	the fancy stuff requires looking backward for a parsing synch point; ps1
+	lines are the only sensible thing to look for in a shell window, but are a
+	bad thing to look for in a file window (ps1 lines show up in my module
+	docstrings often).  PythonWin's shell should set this true too.
+
+	Persistent problem:  strings containing def/class can still screw things up
+	completely.  No improvement.  Simplest workaround is on the user's head, and
+	consists of inserting e.g.
+
+	def _(): pass
+
+	(or any other def/class) after the end of the multiline string that's
+	screwing them up.  This is especially irksome because IDLE's syntax coloring
+	is *not* confused, so when this happens the colors don't match the
+	indentation behavior they see.
+
+	* AutoIndent.py: Tim Peters again:
+
+	[Tim, after adding some bracket smarts to AutoIndent.py]
+	> ...
+	> What it can't possibly do without reparsing large gobs of text is
+	> suggest a reasonable indent level after you've *closed* a bracket
+	> left open on some previous line.
+	> ...
+
+	The attached can, and actually fast enough to use -- most of the time.  The
+	code is tricky beyond belief to achieve that, but it works so far; e.g.,
+
+	        return len(string.expandtabs(str[self.stmt_start :
+	                                         ^ indents to caret
+	                                         i],
+	                                     ^ indents to caret
+	                                     self.tabwidth)) + 1
+	    ^ indents to caret
+
+	It's about as smart as pymode now, wrt both bracket and backslash
+	continuation rules.  It does require reparsing large gobs of text, and if it
+	happens to find something that looks like a "def" or "class" or sys.ps1
+	buried in a multiline string, but didn't suck up enough preceding text to
+	see the start of the string, it's completely hosed.  I can't repair that --
+	it's just too slow to reparse from the start of the file all the time.
+
+	AutoIndent has grown a new num_context_lines tuple attribute that controls
+	how far to look back, and-- like other params --this could/should be made
+	user-overridable at startup and per-file on the fly.
+
+	* PyParse.py: New file by Tim Peters:
+
+	One new file in the attached, PyParse.py.  The LineStudier (whatever it was
+	called <wink>) class was removed from AutoIndent; PyParse subsumes its
+	functionality.
+
+	* AutoIndent.py: Tim Peters keeps revising this module (more to come):
+
+	Removed "New tabwidth" menu binding.
+
+	Added "a tab means how many spaces?" dialog to block tabify and untabify.  I
+	think prompting for this is good now:  they're usually at-most-once-per-file
+	commands, and IDLE can't let them change tabwidth from the Tk default
+	anymore, so IDLE can no longer presume to have any idea what a tab means.
+
+	Irony:  for the purpose of keeping comments aligned via tabs, Tk's
+	non-default approach is much nicer than the Emacs/Notepad/Codewright/vi/etc
+	approach.
+
+	* EditorWindow.py:
+	1. Catch NameError on import (could be raised by case mismatch on Windows).
+	2. No longer need to reset pyclbr cache and show watch cursor when calling
+	   ClassBrowser -- the ClassBrowser takes care of pyclbr and the TreeWidget
+	   takes care of the watch cursor.
+	3. Reset the focus to the current window after error message about class
+	   browser on buffer without filename.
+
+	* Icons/minusnode.gif, Icons/plusnode.gif: Missed a few.
+
+	* ClassBrowser.py, PathBrowser.py: Rewritten based on TreeWidget.py
+
+	* ObjectBrowser.py: Object browser, based on TreeWidget.py.
+
+	* TreeWidget.py: Tree widget done right.
+
+	* ToolTip.py: As yet unused code for tool tips.
+
+	* ScriptBinding.py:
+	Ensure sys.argv[0] is the script name on Run Script.
+
+	* ZoomHeight.py: Move zoom height functionality to separate function.
+
+	* Icons/folder.gif, Icons/openfolder.gif, Icons/python.gif, Icons/tk.gif:
+	A few icons used by ../TreeWidget.py and its callers.
+
+	* AutoIndent.py: New version by Tim Peters improves block opening test.
+
+Fri May 21 04:46:17 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Attic/History.py, PyShell.py: Rename History to IdleHistory.
+	Add isatty() to pseudo files.
+
+	* StackViewer.py: Make initial stack viewer wider
+
+	* TODO.txt: New wishes
+
+	* AutoIndent.py, EditorWindow.py, PyShell.py:
+	Much improved autoindent and handling of tabs,
+	by Tim Peters.
+
+Mon May  3 15:49:52 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* AutoIndent.py, EditorWindow.py, FormatParagraph.py, UndoDelegator.py:
+	Tim Peters writes:
+
+	I'm still unsure, but couldn't stand the virtual event trickery so tried a
+	different sin (adding undo_block_start/stop methods to the Text instance in
+	EditorWindow.py).  Like it or not, it's efficient and works <wink>.  Better
+	idea?
+
+	Give the attached a whirl.  Even if you hate the implementation, I think
+	you'll like the results.  Think I caught all the "block edit" cmds,
+	including Format Paragraph, plus subtler ones involving smart indents and
+	backspacing.
+
+	* WidgetRedirector.py: Tim Peters writes:
+
+	[W]hile trying to dope out how redirection works, stumbled into two
+	possible glitches.  In the first, it doesn't appear to make sense to try to
+	rename a command that's already been destroyed; in the second, the name
+	"previous" doesn't really bring to mind "ignore the previous value" <wink>.
+
+Fri Apr 30 19:39:25 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* __init__.py: Support for using idle as a package.
+
+	* PathBrowser.py:
+	Avoid listing files more than once (e.g. foomodule.so has two hits:
+	once for foo + module.so, once for foomodule + .so).
+
+Mon Apr 26 22:20:38 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ChangeLog, ColorDelegator.py, PyShell.py: Tim Peters strikes again:
+
+	Ho ho ho -- that's trickier than it sounded!  The colorizer is working with
+	"line.col" strings instead of Text marks, and the absolute coordinates of
+	the point of interest can change across the self.update call (voice of
+	baffled experience, when two quick backspaces no longer fooled it, but a
+	backspace followed by a quick ENTER did <wink>).
+
+	Anyway, the attached appears to do the trick.  CPU usage goes way up when
+	typing quickly into a long triple-quoted string, but the latency is fine for
+	me (a relatively fast typist on a relatively slow machine).  Most of the
+	changes here are left over from reducing the # of vrbl names to help me
+	reason about the logic better; I hope the code is a *little* easier to
+
+Fri Apr 23 14:01:25 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* EditorWindow.py:
+	Provide full arguments to __import__ so it works in packagized IDLE.
+
+Thu Apr 22 23:20:17 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+        * help.txt:
+        Bunch of updates necessary due to recent changes; added docs for File
+        menu, command line and color preferences.
+
+        * Bindings.py: Remove obsolete 'script' menu.
+
+	* TODO.txt: Several wishes fulfilled.
+
+	* OutputWindow.py:
+	Moved classes OnDemandOutputWindow and PseudoFile here,
+	from ScriptBinding.py where they are no longer needed.
+
+	* ScriptBinding.py:
+	Mostly rewritten.  Instead of the old Run module and Debug module,
+	there are two new commands:
+
+	Import module (F5) imports or reloads the module and also adds its
+	name to the __main__ namespace.  This gets executed in the PyShell
+	window under control of its debug settings.
+
+	Run script (Control-F5) is similar but executes the contents of the
+	file directly in the __main__ namespace.
+
+	* PyShell.py: Nits: document use of $IDLESTARTUP; display idle version
+
+	* idlever.py: New version to celebrate new command line
+
+	* OutputWindow.py: Added flush(), for completeness.
+
+	* PyShell.py:
+	A lot of changes to make the command line more useful.  You can now do:
+	  idle.py -e file ...    -- to edit files
+	  idle.py script arg ... -- to run a script
+	  idle.py -c cmd arg ... -- to run a command
+	Other options, see also the usage message (also new!) for more details:
+	  -d       -- enable debugger
+	  -s       -- run $IDLESTARTUP or $PYTHONSTARTUP
+	  -t title -- set Python Shell window's title
+	sys.argv is set accordingly, unless -e is used.
+	sys.path is absolutized, and all relevant paths are inserted into it.
+
+	Other changes:
+	- the environment in which commands are executed is now the
+	  __main__ module
+	- explicitly save sys.stdout etc., don't restore from sys.__stdout__
+	- new interpreter methods execsource(), execfile(), stuffsource()
+	- a few small nits
+
+	* TODO.txt:
+	Some more TODO items.  Made up my mind about command line args,
+	Run/Import, __main__.
+
+	* ColorDelegator.py:
+	Super-elegant patch by Tim Peters that speeds up colorization
+	dramatically (up to 15 times he claims).  Works by reading more than
+	one line at a time, up to 100-line chunks (starting with one line and
+	then doubling up to the limit).  On a typical machine (e.g. Tim's
+	P5-166) this doesn't reduce interactive responsiveness in a noticeable
+	way.
+
+Wed Apr 21 15:49:34 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ColorDelegator.py:
+	Patch by Tim Peters to speed up colorizing of big multiline strings.
+
+Tue Apr 20 17:32:52 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* extend.txt:
+	For an event 'foo-bar', the corresponding method must be called
+	foo_bar_event().  Therefore, fix the references to zoom_height() in
+	the example.
+
+	* IdlePrefs.py: Restored the original IDLE color scheme.
+
+	* PyShell.py, IdlePrefs.py, ColorDelegator.py, EditorWindow.py:
+	Color preferences code by Loren Luke (massaged by me somewhat)
+
+	* SearchEngine.py:
+	Patch by Mark Favas: it fixes the search engine behaviour where an
+	unsuccessful search wraps around and re-searches that part of the file
+	between the start of the search and the end of the file - only really
+	an issue for very large files, but... (also removes a redundant
+	m.span() call).
+
+Mon Apr 19 16:26:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TODO.txt: A few wishes are now fulfilled.
+
+	* AutoIndent.py: Tim Peters implements some of my wishes:
+
+	o Makes the tab key intelligently insert spaces when appropriate
+	(see Help list banter twixt David Ascher and me; idea stolen from
+	every other editor on earth <wink>).
+
+	o newline_and_indent_event trims trailing whitespace on the old
+	line (pymode and Codewright).
+
+	o newline_and_indent_event no longer fooled by trailing whitespace or
+	comment after ":" (pymode, PTUI).
+
+	o newline_and_indent_event now reduces the new line's indentation after
+	return, break, continue, raise and pass stmts (pymode).
+
+	The last two are easy to fool in the presence of strings &
+	continuations, but pymode requires Emacs's high-powered C parsing
+	functions to avoid that in finite time.
+
+======================================================================
+	Python release 1.5.2c1, IDLE version 0.4
+======================================================================
+
+Wed Apr  7 18:41:59 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* README.txt, NEWS.txt: New version.
+
+	* idlever.py: Version bump awaiting impending new release.
+	(Not much has changed :-( )
+
+Mon Mar 29 14:52:28 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ScriptBinding.py, PyShell.py:
+	At Tim Peters' recommendation, add a dummy flush() method to
+	PseudoFile.
+
+Thu Mar 11 23:21:23 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* PathBrowser.py: Don't crash when sys.path contains an empty string.
+
+	* Attic/Outline.py: This file was never supposed to be part of IDLE.
+
+	* PathBrowser.py:
+	- Don't crash in the case where a superclass is a string instead of a
+	pyclbr.Class object; this can happen when the superclass is
+	unrecognizable (to pyclbr), e.g. when module renaming is used.
+
+	- Show a watch cursor when calling pyclbr (since it may take a while
+	recursively parsing imported modules!).
+
+Wed Mar 10 05:18:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* EditorWindow.py, Bindings.py: Add PathBrowser to File module
+
+	* PathBrowser.py: "Path browser" - 4 scrolled lists displaying:
+	    directories on sys.path
+	    modules in selected directory
+	    classes in selected module
+	    methods of selected class
+
+	Single clicking in a directory, module or class item updates the next
+	column with info about the selected item.  Double clicking in a
+	module, class or method item opens the file (and selects the clicked
+	item if it is a class or method).
+
+	I guess eventually I should be using a tree widget for this, but the
+	ones I've seen don't work well enough, so for now I use the old
+	Smalltalk or NeXT style multi-column hierarchical browser.
+
+	* MultiScrolledLists.py:
+	New utility: multiple scrolled lists in parallel
+
+	* ScrolledList.py: - White background.
+	- Display "(None)" (or text of your choosing) when empty.
+	- Don't set the focus.
+
+======================================================================
+	Python release 1.5.2b2, IDLE version 0.3
+======================================================================
+
+Wed Feb 17 22:47:41 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* NEWS.txt: News in 0.3.
+
+	* README.txt, idlever.py: Bump version to 0.3.
+
+	* EditorWindow.py:
+	After all, we don't need to call the callbacks ourselves!
+
+	* WindowList.py:
+	When deleting, call the callbacks *after* deleting the window from our list!
+
+	* EditorWindow.py:
+	Fix up the Windows menu via the new callback mechanism instead of
+	depending on menu post commands (which don't work when the menu is
+	torn off).
+
+	* WindowList.py:
+	Support callbacks to patch up Windows menus everywhere.
+
+	* ChangeLog: Oh, why not.  Checking in the Emacs-generated change log.
+
+Tue Feb 16 22:34:17 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ScriptBinding.py:
+	Only pop up the stack viewer when requested in the Debug menu.
+
+Mon Feb  8 22:27:49 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* WindowList.py: Don't crash if a window no longer exists.
+
+	* TODO.txt: Restructured a bit.
+
+Mon Feb  1 23:06:17 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* PyShell.py: Add current dir or paths of file args to sys.path.
+
+	* Debugger.py: Add canonic() function -- for brand new bdb.py feature.
+
+	* StackViewer.py: Protect against accessing an empty stack.
+
+Fri Jan 29 20:44:45 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ZoomHeight.py:
+	Use only the height to decide whether to zoom in or out.
+
+Thu Jan 28 22:24:30 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* EditorWindow.py, FileList.py:
+	Make sure the Tcl variables are shared between windows.
+
+	* PyShell.py, EditorWindow.py, Bindings.py:
+	Move menu/key binding code from Bindings.py to EditorWindow.py,
+	with changed APIs -- it makes much more sense there.
+	Also add a new feature: if the first character of a menu label is
+	a '!', it gets a checkbox.  Checkboxes are bound to Boolean Tcl variables
+	that can be accessed through the new getvar/setvar/getrawvar API;
+	the variable is named after the event to which the menu is bound.
+
+	* Debugger.py: Add Quit button to the debugger window.
+
+	* SearchDialog.py:
+	When find_again() finds exactly the current selection, it's a failure.
+
+	* idle.py, Attic/idle: Rename idle -> idle.py
+
+Mon Jan 18 15:18:57 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* EditorWindow.py, WindowList.py: Only deiconify when iconic.
+
+	* TODO.txt: Misc
+
+Tue Jan 12 22:14:34 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* testcode.py, Attic/test.py:
+	Renamed test.py to testcode.py so one can import Python's
+	test package from inside IDLE.  (Suggested by Jack Jansen.)
+
+	* EditorWindow.py, ColorDelegator.py:
+	Hack to close a window that is colorizing.
+
+	* Separator.py: Vladimir Marangozov's patch:
+	The separator dances too much and seems to jump by arbitrary amounts
+	in arbitrary directions when I try to move it for resizing the frames.
+	This patch makes it more quiet.
+
+Mon Jan 11 14:52:40 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* TODO.txt: Some requests have been fulfilled.
+
+	* EditorWindow.py:
+	Set the cursor to a watch when opening the class browser (which may
+	take quite a while, browsing multiple files).
+
+	Newer, better center() -- but assumes no wrapping.
+
+	* SearchBinding.py:
+	Got rid of debug print statement in goto_line_event().
+
+	* ScriptBinding.py:
+	I think I like it better if it prints the traceback even when it displays
+	the stack viewer.
+
+	* Debugger.py: Bind ESC to close-window.
+
+	* ClassBrowser.py: Use a HSeparator between the classes and the items.
+	Make the list of classes wider by default (40 chars).
+	Bind ESC to close-window.
+
+	* Separator.py:
+	Separator classes (draggable divider between two panes).
+
+Sat Jan  9 22:01:33 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* WindowList.py:
+	Don't traceback when wakeup() is called when the window has been destroyed.
+	This can happen when a torn-of Windows menu references closed windows.
+	And Tim Peters claims that the Windows menu is his favorite to tear off...
+
+	* EditorWindow.py: Allow tearing off of the Windows menu.
+
+	* StackViewer.py: Close on ESC.
+
+	* help.txt: Updated a bunch of things (it was mostly still 0.1!)
+
+	* extend.py: Added ScriptBinding to standard bindings.
+
+	* ScriptBinding.py:
+	This now actually works.  See doc string.  It can run a module (i.e.
+	import or reload) or debug it (same with debugger control).  Output
+	goes to a fresh output window, only created when needed.
+
+======================================================================
+	Python release 1.5.2b1, IDLE version 0.2
+======================================================================
+
+Fri Jan  8 17:26:02 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* README.txt, NEWS.txt: What's new in this release.
+
+	* Bindings.py, PyShell.py:
+	Paul Prescod's patches to allow the stack viewer to pop up when a
+	traceback is printed.
+
+Thu Jan  7 00:12:15 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* FormatParagraph.py:
+	Change paragraph width limit to 70 (like Emacs M-Q).
+
+	* README.txt:
+	Separating TODO from README.  Slight reformulation of features.  No
+	exact release date.
+
+	* TODO.txt: Separating TODO from README.
+
+Mon Jan  4 21:19:09 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* FormatParagraph.py:
+	Hm.  There was a boundary condition error at the end of the file too.
+
+	* SearchBinding.py: Hm.  Add Unix binding for replace, too.
+
+	* keydefs.py: Ran eventparse.py again.
+
+	* FormatParagraph.py: Added Unix Meta-q key binding;
+	fix find_paragraph when at start of file.
+
+	* AutoExpand.py: Added Meta-/ binding for Unix as alt for Alt-/.
+
+	* SearchBinding.py:
+	Add unix binding for grep (otherwise the menu entry doesn't work!)
+
+	* ZoomHeight.py: Adjusted Unix height to work with fvwm96. :=(
+
+	* GrepDialog.py: Need to import sys!
+
+	* help.txt, extend.txt, README.txt: Formatted some paragraphs
+
+	* extend.py, FormatParagraph.py:
+	Add new extension to reformat a (text) paragraph.
+
+	* ZoomHeight.py: Typo in Win specific height setting.
+
+Sun Jan  3 00:47:35 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* AutoIndent.py: Added something like Tim Peters' backspace patch.
+
+	* ZoomHeight.py: Adapted to Unix (i.e., more hardcoded constants).
+
+Sat Jan  2 21:28:54 1999  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* keydefs.py, idlever.py, idle.pyw, idle.bat, help.txt, extend.txt, extend.py, eventparse.py, ZoomHeight.py, WindowList.py, UndoDelegator.py, StackViewer.py, SearchEngine.py, SearchDialogBase.py, SearchDialog.py, ScrolledList.py, SearchBinding.py, ScriptBinding.py, ReplaceDialog.py, Attic/README, README.txt, PyShell.py, Attic/PopupMenu.py, OutputWindow.py, IOBinding.py, Attic/HelpWindow.py, History.py, GrepDialog.py, FileList.py, FrameViewer.py, EditorWindow.py, Debugger.py, Delegator.py, ColorDelegator.py, Bindings.py, ClassBrowser.py, AutoExpand.py, AutoIndent.py:
+	Checking in IDLE 0.2.
+
+	Much has changed -- too much, in fact, to write down.
+	The big news is that there's a standard way to write IDLE extensions;
+	see extend.txt.  Some sample extensions have been provided, and
+	some existing code has been converted to extensions.  Probably the
+	biggest new user feature is a new search dialog with more options,
+	search and replace, and even search in files (grep).
+
+	This is exactly as downloaded from my laptop after returning
+	from the holidays -- it hasn't even been tested on Unix yet.
+
+Fri Dec 18 15:52:54 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* FileList.py, ClassBrowser.py:
+	Fix the class browser to work even when the file is not on sys.path.
+
+Tue Dec  8 20:39:36 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Attic/turtle.py: Moved to Python 1.5.2/Lib
+
+Fri Nov 27 03:19:20 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* help.txt: Typo
+
+	* EditorWindow.py, FileList.py: Support underlining of menu labels
+
+	* Bindings.py:
+	New approach, separate tables for menus (platform-independent) and key
+	definitions (platform-specific), and generating accelerator strings
+	automatically from the key definitions.
+
+Mon Nov 16 18:37:42 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Attic/README: Clarify portability and main program.
+
+	* Attic/README: Added intro for 0.1 release and append Grail notes.
+
+Mon Oct 26 18:49:00 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Attic/turtle.py: root is now a global called _root
+
+Sat Oct 24 16:38:38 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Attic/turtle.py: Raise the root window on reset().
+	Different action on WM_DELETE_WINDOW is more likely to do the right thing,
+	allowing us to destroy old windows.
+
+	* Attic/turtle.py:
+	Split the goto() function in two: _goto() is the internal one,
+	using Canvas coordinates, and goto() uses turtle coordinates
+	and accepts variable argument lists.
+
+	* Attic/turtle.py: Cope with destruction of the window
+
+	* Attic/turtle.py: Turtle graphics
+
+	* Debugger.py: Use of Breakpoint class should be bdb.Breakpoint.
+
+Mon Oct 19 03:33:40 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* SearchBinding.py:
+	Speed up the search a bit -- don't drag a mark around...
+
+	* PyShell.py:
+	Change our special entries from <console#N> to <pyshell#N>.
+	Patch linecache.checkcache() to keep our special entries alive.
+	Add popup menu to all editor windows to set a breakpoint.
+
+	* Debugger.py:
+	Use and pass through the 'force' flag to set_dict() where appropriate.
+	Default source and globals checkboxes to false.
+	Don't interact in user_return().
+	Add primitive set_breakpoint() method.
+
+	* ColorDelegator.py:
+	Raise priority of 'sel' tag so its foreground (on Windows) will take
+	priority over text colorization (which on Windows is almost the
+	same color as the selection background).
+
+	Define a tag and color for breakpoints ("BREAK").
+
+	* Attic/PopupMenu.py: Disable "Open stack viewer" and "help" commands.
+
+	* StackViewer.py:
+	Add optional 'force' argument (default 0) to load_dict().
+	If set, redo the display even if it's the same dict.
+
+Fri Oct 16 21:10:12 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* StackViewer.py: Do nothing when loading the same dict as before.
+
+	* PyShell.py: Details for debugger interface.
+
+	* Debugger.py:
+	Restructured and more consistent.  Save checkboxes across instantiations.
+
+	* EditorWindow.py, Attic/README, Bindings.py:
+	Get rid of conflicting ^X binding.  Use ^W.
+
+	* Debugger.py, StackViewer.py:
+	Debugger can now show local and global variables.
+
+	* Debugger.py: Oops
+
+	* Debugger.py, PyShell.py: Better debugger support (show stack etc).
+
+	* Attic/PopupMenu.py: Follow renames in StackViewer module
+
+	* StackViewer.py:
+	Rename classes to StackViewer (the widget) and StackBrowser (the toplevel).
+
+	* ScrolledList.py: Add close() method
+
+	* EditorWindow.py: Clarify 'Open Module' dialog text
+
+	* StackViewer.py: Restructured into a browser and a widget.
+
+Thu Oct 15 23:27:08 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* ClassBrowser.py, ScrolledList.py:
+	Generalized the scrolled list which is the base for the class and
+	method browser into a separate class in its own module.
+
+	* Attic/test.py: Cosmetic change
+
+	* Debugger.py: Don't show function name if there is none
+
+Wed Oct 14 03:43:05 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Debugger.py, PyShell.py: Polish the Debugger GUI a bit.
+	Closing it now also does the right thing.
+
+Tue Oct 13 23:51:13 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* Debugger.py, PyShell.py, Bindings.py:
+	Ad primitive debugger interface (so far it will step and show you the
+	source, but it doesn't yet show the stack).
+
+	* Attic/README: Misc
+
+	* StackViewer.py: Whoops -- referenced self.top before it was set.
+
+	* help.txt: Added history and completion commands.
+
+	* help.txt: Updated
+
+	* FileList.py: Add class browser functionality.
+
+	* StackViewer.py:
+	Add a close() method and bind to WM_DELETE_WINDOW protocol
+
+	* PyShell.py: Clear the linecache before printing a traceback
+
+	* Bindings.py: Added class browser binding.
+
+	* ClassBrowser.py: Much improved, much left to do.
+
+	* PyShell.py: Make the return key do what I mean more often.
+
+	* ClassBrowser.py:
+	Adding the beginnings of a Class browser.  Incomplete, yet.
+
+	* EditorWindow.py, Bindings.py:
+	Add new command, "Open module".  You select or type a module name,
+	and it opens the source.
+
+Mon Oct 12 23:59:27 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* PyShell.py: Subsume functionality from Popup menu in Debug menu.
+	Other stuff so the PyShell window can be resurrected from the Windows menu.
+
+	* FileList.py: Get rid of PopUp menu.
+	Create a simple Windows menu.  (Imperfect when Untitled windows exist.)
+	Add wakeup() method: deiconify, raise, focus.
+
+	* EditorWindow.py: Generalize menu creation.
+
+	* Bindings.py: Add Debug and Help menu items.
+
+	* EditorWindow.py: Added a menu bar to every window.
+
+	* Bindings.py: Add menu configuration to the event configuration.
+
+	* Attic/PopupMenu.py: Pass a root to the help window.
+
+	* SearchBinding.py:
+	Add parent argument to 'go to line number' dialog box.
+
+Sat Oct 10 19:15:32 1998  Guido van Rossum  <guido@cnri.reston.va.us>
+
+	* StackViewer.py:
+	Add a label at the top showing (very basic) help for the stack viewer.
+	Add a label at the bottom showing the exception info.
+
+	* Attic/test.py, Attic/idle: Add Unix main script and test program.
+
+	* idle.pyw, help.txt, WidgetRedirector.py, UndoDelegator.py, StackViewer.py, SearchBinding.py, Attic/README, PyShell.py, Attic/PopupMenu.py, Percolator.py, Outline.py, IOBinding.py, History.py, Attic/HelpWindow.py, FrameViewer.py, FileList.py, EditorWindow.py, Delegator.py, ColorDelegator.py, Bindings.py, AutoIndent.py, AutoExpand.py:
+	Initial checking of Tk-based Python IDE.
+	Features: text editor with syntax coloring and undo;
+	subclassed into interactive Python shell which adds history.
+
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/HISTORY.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/HISTORY.txt
new file mode 100644
index 0000000000000000000000000000000000000000..8bd4e890260de46ac80647a7fb347ff6fe471282
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/HISTORY.txt
@@ -0,0 +1,296 @@
+IDLE History from Python 1.5.2 to 2.1
+=====================================
+
+This file contains the release messages for previous IDLE releases.
+As you read on you go back to the dark ages of IDLE's history.
+
+
+What's New in IDLEfork 0.8.1?
+=============================
+
+*Release date: 22-Jul-2001*
+
+- New tarball released as a result of the 'revitalisation' of the IDLEfork
+  project.
+
+- This release requires python 2.1 or better. Compatibility with earlier
+  versions of python (especially ancient ones like 1.5x) is no longer a
+  priority in IDLEfork development.
+
+- This release is based on a merging of the earlier IDLE fork work with current
+  cvs IDLE (post IDLE version 0.8), with some minor additional coding by Kurt
+  B. Kaiser and Stephen M. Gava.
+
+- This release is basically functional but also contains some known breakages,
+  particularly with running things from the shell window. Also the debugger is
+  not working, but I believe this was the case with the previous IDLE fork
+  release (0.7.1) as well.
+
+- This release is being made now to mark the point at which IDLEfork is
+  launching into a new stage of development.
+
+- IDLEfork CVS will now be branched to enable further development and
+  exploration of the two "execution in a remote process" patches submitted by
+  David Scherer (David's is currently in IDLEfork) and GvR, while stabilisation
+  and development of less heavyweight improvements (like user customisation)
+  can continue on the trunk.
+
+
+What's New in IDLEfork 0.7.1?
+==============================
+
+*Release date: 15-Aug-2000*
+
+- First project tarball released.
+
+- This was the first release of IDLE fork, which at this stage was a
+  combination of IDLE 0.5 and the VPython idle fork, with additional changes
+  coded by David Scherer, Peter Schneider-Kamp and Nicholas Riley.
+
+
+
+IDLEfork 0.7.1 - 29 May 2000
+-----------------------------
+
+   David Scherer  <dscherer@cmu.edu>
+
+- This is a modification of the CVS version of IDLE 0.5, updated as of
+  2000-03-09.  It is alpha software and might be unstable.  If it breaks, you
+  get to keep both pieces.
+
+- If you have problems or suggestions, you should either contact me or post to
+  the idle-dev mailing list (making it clear that you are using this modified
+  version of IDLE).
+
+- Changes:
+
+  - The ExecBinding module, a replacement for ScriptBinding, executes programs
+    in a separate process, piping standard I/O through an RPC mechanism to an
+    OnDemandOutputWindow in IDLE.  It supports executing unnamed programs
+    (through a temporary file).  It does not yet support debugging.
+
+  - When running programs with ExecBinding, tracebacks will be clipped to
+    exclude system modules.  If, however, a system module calls back into the
+    user program, that part of the traceback will be shown.
+
+  - The OnDemandOutputWindow class has been improved.  In particular, it now
+    supports a readline() function used to implement user input, and a
+    scroll_clear() operation which is used to hide the output of a previous run
+    by scrolling it out of the window.
+
+  - Startup behavior has been changed.  By default IDLE starts up with just a
+    blank editor window, rather than an interactive window.  Opening a file in
+    such a blank window replaces the (nonexistent) contents of that window
+    instead of creating another window.  Because of the need to have a
+    well-known port for the ExecBinding protocol, only one copy of IDLE can be
+    running.  Additional invocations use the RPC mechanism to report their
+    command line arguments to the copy already running.
+
+  - The menus have been reorganized.  In particular, the excessively large
+    'edit' menu has been split up into 'edit', 'format', and 'run'.
+
+  - 'Python Documentation' now works on Windows, if the win32api module is
+    present.
+
+  - A few key bindings have been changed: F1 now loads Python Documentation
+    instead of the IDLE help; shift-TAB is now a synonym for unindent.
+
+- New modules:
+
+  ExecBinding.py         Executes program through loader
+  loader.py              Bootstraps user program
+  protocol.py            RPC protocol
+  Remote.py              User-process interpreter
+  spawn.py               OS-specific code to start programs
+
+- Files modified:
+
+  autoindent.py          ( bindings tweaked )
+  bindings.py            ( menus reorganized )
+  config.txt             ( execbinding enabled )
+  editorwindow.py        ( new menus, fixed 'Python Documentation' )
+  filelist.py            ( hook for "open in same window" )
+  formatparagraph.py     ( bindings tweaked )
+  idle.bat               ( removed absolute pathname )
+  idle.pyw               ( weird bug due to import with same name? )
+  iobinding.py           ( open in same window, EOL convention )
+  keydefs.py             ( bindings tweaked )
+  outputwindow.py        ( readline, scroll_clear, etc )
+  pyshell.py             ( changed startup behavior )
+  readme.txt             ( <Recursion on file with id=1234567> )
+
+
+
+IDLE 0.5 - February 2000 - Release Notes
+----------------------------------------
+
+This is an early release of IDLE, my own attempt at a Tkinter-based
+IDE for Python.
+
+(For a more detailed change log, see the file ChangeLog.)
+
+FEATURES
+
+IDLE has the following features:
+
+- coded in 100% pure Python, using the Tkinter GUI toolkit (i.e. Tcl/Tk)
+
+- cross-platform: works on Windows and Unix (on the Mac, there are
+currently problems with Tcl/Tk)
+
+- multi-window text editor with multiple undo, Python colorizing
+and many other features, e.g. smart indent and call tips
+
+- Python shell window (a.k.a. interactive interpreter)
+
+- debugger (not complete, but you can set breakpoints, view  and step)
+
+USAGE
+
+The main program is in the file "idle.py"; on Unix, you should be able
+to run it by typing "./idle.py" to your shell.  On Windows, you can
+run it by double-clicking it; you can use idle.pyw to avoid popping up
+a DOS console.  If you want to pass command line arguments on Windows,
+use the batch file idle.bat.
+
+Command line arguments: files passed on the command line are executed,
+not opened for editing, unless you give the -e command line option.
+Try "./idle.py -h" to see other command line options.
+
+IDLE requires Python 1.5.2, so it is currently only usable with a
+Python 1.5.2 distribution.  (An older version of IDLE is distributed
+with Python 1.5.2; you can drop this version on top of it.)
+
+COPYRIGHT
+
+IDLE is covered by the standard Python copyright notice
+(https://www.python.org/doc/copyright).
+
+
+New in IDLE 0.5 (2/15/2000)
+---------------------------
+
+Tons of stuff, much of it contributed by Tim Peters and Mark Hammond:
+
+- Status bar, displaying current line/column (Moshe Zadka).
+
+- Better stack viewer, using tree widget.  (XXX Only used by Stack
+Viewer menu, not by the debugger.)
+
+- Format paragraph now recognizes Python block comments and reformats
+them correctly (MH)
+
+- New version of pyclbr.py parses top-level functions and understands
+much more of Python's syntax; this is reflected in the class and path
+browsers (TP)
+
+- Much better auto-indent; knows how to indent the insides of
+multi-line statements (TP)
+
+- Call tip window pops up when you type the name of a known function
+followed by an open parenthesis.  Hit ESC or click elsewhere in the
+window to close the tip window (MH)
+
+- Comment out region now inserts ## to make it stand out more (TP)
+
+- New path and class browsers based on a tree widget that looks
+familiar to Windows users
+
+- Reworked script running commands to be more intuitive: I/O now
+always goes to the *Python Shell* window, and raw_input() works
+correctly.  You use F5 to import/reload a module: this adds the module
+name to the __main__ namespace.  You use Control-F5 to run a script:
+this runs the script *in* the __main__ namespace.  The latter also
+sets sys.argv[] to the script name
+
+
+New in IDLE 0.4 (4/7/99)
+------------------------
+
+Most important change: a new menu entry "File -> Path browser", shows
+a 4-column hierarchical browser which lets you browse sys.path,
+directories, modules, and classes.  Yes, it's a superset of the Class
+browser menu entry.  There's also a new internal module,
+MultiScrolledLists.py, which provides the framework for this dialog.
+
+
+New in IDLE 0.3 (2/17/99)
+-------------------------
+
+Most important changes:
+
+- Enabled support for running a module, with or without the debugger.
+Output goes to a new window.  Pressing F5 in a module is effectively a
+reload of that module; Control-F5 loads it under the debugger.
+
+- Re-enable tearing off the Windows menu, and make a torn-off Windows
+menu update itself whenever a window is opened or closed.
+
+- Menu items can now be have a checkbox (when the menu label starts
+with "!"); use this for the Debugger and "Auto-open stack viewer"
+(was: JIT stack viewer) menu items.
+
+- Added a Quit button to the Debugger API.
+
+- The current directory is explicitly inserted into sys.path.
+
+- Fix the debugger (when using Python 1.5.2b2) to use canonical
+filenames for breakpoints, so these actually work.  (There's still a
+lot of work to be done to the management of breakpoints in the
+debugger though.)
+
+- Closing a window that is still colorizing now actually works.
+
+- Allow dragging of the separator between the two list boxes in the
+class browser.
+
+- Bind ESC to "close window" of the debugger, stack viewer and class
+browser.  It removes the selection highlighting in regular text
+windows.  (These are standard Windows conventions.)
+
+
+New in IDLE 0.2 (1/8/99)
+------------------------
+
+Lots of changes; here are the highlights:
+
+General:
+
+- You can now write and configure your own IDLE extension modules; see
+extend.txt.
+
+
+File menu:
+
+The command to open the Python shell window is now in the File menu.
+
+
+Edit menu:
+
+New Find dialog with more options; replace dialog; find in files dialog.
+
+Commands to tabify or untabify a region.
+
+Command to format a paragraph.
+
+
+Debug menu:
+
+JIT (Just-In-Time) stack viewer toggle -- if set, the stack viewer
+automatically pops up when you get a traceback.
+
+Windows menu:
+
+Zoom height -- make the window full height.
+
+
+Help menu:
+
+The help text now show up in a regular window so you can search and
+even edit it if you like.
+
+
+
+IDLE 0.1 was distributed with the Python 1.5.2b1 release on 12/22/98.
+
+======================================================================
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/NEWS2x.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/NEWS2x.txt
new file mode 100644
index 0000000000000000000000000000000000000000..3721193007e59b744ea4c542e82b04272c5d4eb0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/NEWS2x.txt
@@ -0,0 +1,660 @@
+What's New in IDLE 2.7? (Merged into 3.1 before 2.7 release.)
+=======================
+*Release date: 03-Jul-2010*
+
+- idle.py modified and simplified to better support developing experimental
+  versions of IDLE which are not installed in the standard location.
+
+- OutputWindow/PyShell right click menu "Go to file/line" wasn't working with
+  file paths containing spaces.  Bug 5559.
+
+- Windows: Version string for the .chm help file changed, file not being
+  accessed  Patch 5783 Guilherme Polo
+
+- Allow multiple IDLE GUI/subprocess pairs to exist simultaneously. Thanks to
+  David Scherer for suggesting the use of an ephemeral port for the GUI.
+  Patch 1529142 Weeble.
+
+- Remove port spec from run.py and fix bug where subprocess fails to
+  extract port from command line when warnings are present.
+
+- Tk 8.5 Text widget requires 'wordprocessor' tabstyle attr to handle
+  mixed space/tab properly. Issue 5129, patch by Guilherme Polo.
+
+- Issue #3549: On MacOS the preferences menu was not present
+
+- IDLE would print a "Unhandled server exception!" message when internal
+  debugging is enabled.
+
+- Issue #4455: IDLE failed to display the windows list when two windows have
+  the same title.
+
+- Issue #4383: When IDLE cannot make the connection to its subprocess, it would
+  fail to properly display the error message.
+
+- help() was not paging to the shell.  Issue1650.
+
+- CodeContext was not importing.
+
+- Corrected two 3.0 compatibility errors reported by Mark Summerfield:
+  http://mail.python.org/pipermail/python-3000/2007-December/011491.html
+
+- Shell was not colorizing due to bug introduced at r57998,  Bug 1586.
+
+- Issue #1585: IDLE uses non-existent xrange() function.
+
+- Windows EOL sequence not converted correctly, encoding error.
+  Caused file save to fail. Bug 1130.
+
+- IDLE converted to Python 3000 syntax.
+
+- Strings became Unicode.
+
+- CallTips module now uses the inspect module to produce the argspec.
+
+- IDLE modules now use absolute import instead of implied relative import.
+
+- atexit call replaces sys.exitfunc.  The functionality of delete-exitfunc flag
+  in config-main.cfg remains unchanged: if set, registered exit functions will
+  be cleared before IDLE exits.
+
+
+What's New in IDLE 2.6
+======================
+*Release date: 01-Oct-2008*, merged into 3.0 releases detailed above (3.0rc2)
+
+- Issue #2665: On Windows, an IDLE installation upgraded from an old version
+  would not start if a custom theme was defined.
+
+- Home / Control-A toggles between left margin and end of leading white
+  space.  issue1196903, patch by Jeff Shute.
+
+- Improved AutoCompleteWindow logic.  issue2062, patch by Tal Einat.
+
+- Autocompletion of filenames now support alternate separators, e.g. the
+  '/' char on Windows.  issue2061 Patch by Tal Einat.
+
+- Configured selection highlighting colors were ignored; updating highlighting
+  in the config dialog would cause non-Python files to be colored as if they
+  were Python source; improve use of ColorDelagator.  Patch 1334. Tal Einat.
+
+- ScriptBinding event handlers weren't returning 'break'. Patch 2050, Tal Einat
+
+- There was an error on exit if no sys.exitfunc was defined. Issue 1647.
+
+- Could not open files in .idlerc directory if latter was hidden on Windows.
+  Issue 1743, Issue 1862.
+
+- Configure Dialog: improved layout for keybinding.  Patch 1457 Tal Einat.
+
+- tabpage.py updated: tabbedPages.py now supports multiple dynamic rows
+  of tabs.  Patch 1612746 Tal Einat.
+
+- Add confirmation dialog before printing.  Patch 1717170 Tal Einat.
+
+- Show paste position if > 80 col.  Patch 1659326 Tal Einat.
+
+- Update cursor color without restarting.  Patch 1725576 Tal Einat.
+
+- Allow keyboard interrupt only when user code is executing in subprocess.
+  Patch 1225 Tal Einat (reworked from IDLE-Spoon).
+
+- configDialog cleanup. Patch 1730217 Tal Einat.
+
+- textView cleanup. Patch 1718043 Tal Einat.
+
+- Clean up EditorWindow close.
+
+- Patch 1693258: Fix for duplicate "preferences" menu-OS X. Backport of r56204.
+
+- OSX: Avoid crash for those versions of Tcl/Tk which don't have a console
+
+- Bug in idlelib.MultiCall: Options dialog was crashing IDLE if there was an
+  option in config-extensions w/o a value. Patch #1672481, Tal Einat
+
+- Corrected some bugs in AutoComplete.  Also, Page Up/Down in ACW implemented;
+  mouse and cursor selection in ACWindow implemented; double Tab inserts
+  current selection and closes ACW (similar to double-click and Return); scroll
+  wheel now works in ACW.  Added AutoComplete instructions to IDLE Help.
+
+- AutoCompleteWindow moved below input line, will move above if there
+  isn't enough space.  Patch 1621265 Tal Einat
+
+- Calltips now 'handle' tuples in the argument list (display '<tuple>' :)
+  Suggested solution by Christos Georgiou, Bug 791968.
+
+- Add 'raw' support to configHandler. Patch 1650174 Tal Einat.
+
+- Avoid hang when encountering a duplicate in a completion list. Bug 1571112.
+
+- Patch #1362975: Rework CodeContext indentation algorithm to
+  avoid hard-coding pixel widths.
+
+- Bug #813342: Start the IDLE subprocess with -Qnew if the parent
+  is started with that option.
+
+- Honor the "Cancel" action in the save dialog (Debian bug #299092)
+
+- Some syntax errors were being caught by tokenize during the tabnanny
+  check, resulting in obscure error messages.  Do the syntax check
+  first.  Bug 1562716, 1562719
+
+- IDLE's version number takes a big jump to match the version number of
+  the Python release of which it's a part.
+
+
+What's New in IDLE 1.2?
+=======================
+*Release date: 19-SEP-2006*
+
+- File menu hotkeys: there were three 'p' assignments.  Reassign the
+  'Save Copy As' and 'Print' hotkeys to 'y' and 't'.  Change the
+  Shell hotkey from 's' to 'l'.
+
+- IDLE honors new quit() and exit() commands from site.py Quitter() object.
+  Patch 1540892, Jim Jewett
+
+- The 'with' statement is now a Code Context block opener.
+  Patch 1540851, Jim Jewett
+
+- Retrieval of previous shell command was not always preserving indentation
+  (since 1.2a1) Patch 1528468 Tal Einat.
+
+- Changing tokenize (39046) to detect dedent broke tabnanny check (since 1.2a1)
+
+- ToggleTab dialog was setting indent to 8 even if cancelled (since 1.2a1).
+
+- When used w/o subprocess, all exceptions were preceded by an error
+  message claiming they were IDLE internal errors (since 1.2a1).
+
+- Bug #1525817: Don't truncate short lines in IDLE's tool tips.
+
+- Bug #1517990: IDLE keybindings on MacOS X now work correctly
+
+- Bug #1517996: IDLE now longer shows the default Tk menu when a
+  path browser, class browser or debugger is the frontmost window on MacOS X
+
+- EditorWindow.test() was failing.  Bug 1417598
+
+- EditorWindow failed when used stand-alone if sys.ps1 not set.
+  Bug 1010370 Dave Florek
+
+- Tooltips failed on new-syle class __init__ args.  Bug 1027566 Loren Guthrie
+
+- Avoid occasional failure to detect closing paren properly.
+  Patch 1407280 Tal Einat
+
+- Rebinding Tab key was inserting 'tab' instead of 'Tab'.  Bug 1179168.
+
+- Colorizer now handles #<builtin> correctly, also unicode strings and
+  'as' keyword in comment directly following import command. Closes 1325071.
+  Patch 1479219 Tal Einat
+
+- Patch #1162825: Support non-ASCII characters in IDLE window titles.
+
+- Source file f.flush() after writing; trying to avoid lossage if user
+  kills GUI.
+
+- Options / Keys / Advanced dialog made functional.  Also, allow binding
+  of 'movement' keys.
+
+- 'syntax' patch adds improved calltips and a new class attribute listbox.
+  MultiCall module allows binding multiple actions to an event.
+  Patch 906702 Noam Raphael
+
+- Better indentation after first line of string continuation.
+  IDLEfork Patch 681992, Noam Raphael
+
+- Fixed CodeContext alignment problem, following suggestion from Tal Einat.
+
+- Increased performance in CodeContext extension  Patch 936169 Noam Raphael
+
+- Mac line endings were incorrect when pasting code from some browsers
+  when using X11 and the Fink distribution.  Python Bug 1263656.
+
+- <Enter> when cursor is on a previous command retrieves that command.  Instead
+  of replacing the input line, the previous command is now appended to the
+  input line. Indentation is preserved, and undo is enabled.
+  Patch 1196917  Jeff Shute
+
+- Clarify "tab/space" Error Dialog and "Tab Width" Dialog associated with
+  the Untabify command.
+
+- Corrected "tab/space" Error Dialog to show correct menu for Untabify.
+  Patch 1196980 Jeff Shute
+
+- New files are colorized by default, and colorizing is removed when
+  saving as non-Python files. Patch 1196895 Jeff Shute
+  Closes Python Bugs 775012 and 800432, partial fix IDLEfork 763524
+
+- Improve subprocess link error notification.
+
+- run.py: use Queue's blocking feature instead of sleeping in the main
+  loop.  Patch # 1190163 Michiel de Hoon
+
+- Add config-main option to make the 'history' feature non-cyclic.
+  Default remains cyclic.  Python Patch 914546 Noam Raphael.
+
+- Removed ability to configure tabs indent from Options dialog.  This 'feature'
+  has never worked and no one has complained.  It is still possible to set a
+  default tabs (v. spaces) indent 'manually' via config-main.def (or to turn on
+  tabs for the current EditorWindow via the Format menu) but IDLE will
+  encourage indentation via spaces.
+
+- Enable setting the indentation width using the Options dialog.
+  Bug # 783877
+
+- Add keybindings for del-word-left and del-word-right.
+
+- Discourage using an indent width other than 8 when using tabs to indent
+  Python code.
+
+- Restore use of EditorWindow.set_indentation_params(), was dead code since
+  Autoindent was merged into EditorWindow.  This allows IDLE to conform to the
+  indentation width of a loaded file.  (But it still will not switch to tabs
+  even if the file uses tabs.)  Any change in indent width is local to that
+  window.
+
+- Add Tabnanny check before Run/F5, not just when Checking module.
+
+- If an extension can't be loaded, print warning and skip it instead of
+  erroring out.
+
+- Improve error handling when .idlerc can't be created (warn and exit).
+
+- The GUI was hanging if the shell window was closed while a raw_input()
+  was pending.  Restored the quit() of the readline() mainloop().
+  http://mail.python.org/pipermail/idle-dev/2004-December/002307.html
+
+- The remote procedure call module rpc.py can now access data attributes of
+  remote registered objects.  Changes to these attributes are local, however.
+
+
+What's New in IDLE 1.1?
+=======================
+*Release date: 30-NOV-2004*
+
+- On OpenBSD, terminating IDLE with ctrl-c from the command line caused a
+  stuck subprocess MainThread because only the SocketThread was exiting.
+
+- Saving a Keyset w/o making changes (by using the "Save as New Custom Key Set"
+  button) caused IDLE to fail on restart (no new keyset was created in
+  config-keys.cfg).  Also true for Theme/highlights.  Python Bug 1064535.
+
+- A change to the linecache.py API caused IDLE to exit when an exception was
+  raised while running without the subprocess (-n switch).  Python Bug 1063840.
+
+- When paragraph reformat width was made configurable, a bug was
+  introduced that caused reformatting of comment blocks to ignore how
+  far the block was indented, effectively adding the indentation width
+  to the reformat width.  This has been repaired, and the reformat
+  width is again a bound on the total width of reformatted lines.
+
+- Improve keyboard focus binding, especially in Windows menu.  Improve
+  window raising, especially in the Windows menu and in the debugger.
+  IDLEfork 763524.
+
+- If user passes a non-existent filename on the commandline, just
+  open a new file, don't raise a dialog.  IDLEfork 854928.
+
+- EditorWindow.py was not finding the .chm help file on Windows.  Typo
+  at Rev 1.54.  Python Bug 990954
+
+- checking sys.platform for substring 'win' was breaking IDLE docs on Mac
+  (darwin).  Also, Mac Safari browser requires full file:// URIs.  SF 900580.
+
+- Redirect the warning stream to the shell during the ScriptBinding check of
+  user code and format the warning similarly to an exception for both that
+  check and for runtime warnings raised in the subprocess.
+
+- CodeContext hint pane visibility state is now persistent across sessions.
+  The pane no longer appears in the shell window.  Added capability to limit
+  extensions to shell window or editor windows.  Noam Raphael addition
+  to Patch 936169.
+
+- Paragraph reformat width is now a configurable parameter in the
+  Options GUI.
+
+- New Extension: CodeContext.  Provides block structuring hints for code
+  which has scrolled above an edit window. Patch 936169 Noam Raphael.
+
+- If nulls somehow got into the strings in recent-files.lst
+  EditorWindow.update_recent_files_list() was failing.  Python Bug 931336.
+
+- If the normal background is changed via Configure/Highlighting, it will
+  update immediately, thanks to the previously mentioned patch by Nigel Rowe.
+
+- Add a highlight theme for builtin keywords.  Python Patch 805830 Nigel Rowe
+  This also fixed IDLEfork bug [ 693418 ] Normal text background color not
+  refreshed and Python bug [897872 ] Unknown color name on HP-UX
+
+- rpc.py:SocketIO - Large modules were generating large pickles when downloaded
+  to the execution server.  The return of the OK response from the subprocess
+  initialization was interfering and causing the sending socket to be not
+  ready.  Add an IO ready test to fix this.  Moved the polling IO ready test
+  into pollpacket().
+
+- Fix typo in rpc.py, s/b "pickle.PicklingError" not "pickle.UnpicklingError".
+
+- Added a Tk error dialog to run.py inform the user if the subprocess can't
+  connect to the user GUI process.  Added a timeout to the GUI's listening
+  socket.  Added Tk error dialogs to PyShell.py to announce a failure to bind
+  the port or connect to the subprocess.  Clean up error handling during
+  connection initiation phase.  This is an update of Python Patch 778323.
+
+- Print correct exception even if source file changed since shell was
+  restarted.  IDLEfork Patch 869012 Noam Raphael
+
+- Keybindings with the Shift modifier now work correctly.  So do bindings which
+  use the Space key.  Limit unmodified user keybindings to the function keys.
+  Python Bug 775353, IDLEfork Bugs 755647, 761557
+
+- After an exception, run.py was not setting the exception vector. Noam
+  Raphael suggested correcting this so pdb's postmortem pm() would work.
+  IDLEfork Patch 844675
+
+- IDLE now does not fail to save the file anymore if the Tk buffer is not a
+  Unicode string, yet eol_convention is.  Python Bugs 774680, 788378
+
+- IDLE didn't start correctly when Python was installed in "Program Files" on
+  W2K and XP.  Python Bugs 780451, 784183
+
+- config-main.def documentation incorrectly referred to idle- instead of
+  config-  filenames.  SF 782759  Also added note about .idlerc location.
+
+
+What's New in IDLE 1.0?
+=======================
+*Release date: 29-Jul-2003*
+
+- Added a banner to the shell discussing warnings possibly raised by personal
+  firewall software.  Added same comment to README.txt.
+
+- Calltip error when docstring was None  Python Bug 775541
+
+- Updated extend.txt, help.txt, and config-extensions.def to correctly
+  reflect the current status of the configuration system.  Python Bug 768469
+
+- Fixed: Call Tip Trimming May Loop Forever. Python Patch 769142 (Daniels)
+
+- Replaced apply(f, args, kwds) with f(*args, **kwargs) to improve performance
+  Python Patch 768187
+
+- Break or continue statements outside a loop were causing IDLE crash
+  Python Bug 767794
+
+- Convert Unicode strings from readline to IOBinding.encoding.  Also set
+  sys.std{in|out|err}.encoding, for both the local and the subprocess case.
+  SF IDLEfork patch 682347.
+
+- Extend AboutDialog.ViewFile() to support file encodings.  Make the CREDITS
+  file Latin-1.
+
+- Updated the About dialog to reflect re-integration into Python.  Provide
+  buttons to display Python's NEWS, License, and Credits, plus additional
+  buttons for IDLE's README and NEWS.
+
+- TextViewer() now has a third parameter which allows inserting text into the
+  viewer instead of reading from a file.
+
+- (Created the .../Lib/idlelib directory in the Python CVS, which is a clone of
+  IDLEfork modified to install in the Python environment.  The code in the
+  interrupt module has been moved to thread.interrupt_main(). )
+
+- Printing the Shell window was failing if it was not saved first SF 748975
+
+- When using the Search in Files dialog, if the user had a selection
+  highlighted in his Editor window, insert it into the dialog search field.
+
+- The Python Shell entry was disappearing from the Windows menu.
+
+- Update the Windows file list when a file name change occurs
+
+- Change to File / Open Module: always pop up the dialog, using the current
+  selection as the default value.  This is easier to use habitually.
+
+- Avoided a problem with starting the subprocess when 'localhost' doesn't
+  resolve to the user's loopback interface.  SF 747772
+
+- Fixed an issue with highlighted errors never de-colorizing.  SF 747677.  Also
+  improved notification of Tabnanny Token Error.
+
+- File / New will by default save in the directory of the Edit window from
+  which it was initiated.  SF 748973 Guido van Rossum patch.
+
+
+What's New in IDLEfork 0.9b1?
+=============================
+*Release date: 02-Jun-2003*
+
+- The current working directory of the execution environment (and shell
+  following completion of execution) is now that of the module being run.
+
+- Added the delete-exitfunc option to config-main.def.  (This option is not
+  included in the Options dialog.)  Setting this to True (the default) will
+  cause IDLE to not run sys.exitfunc/atexit when the subprocess exits.
+
+- IDLE now preserves the line ending codes when editing a file produced on
+  a different platform. SF 661759,  SF 538584
+
+- Reduced default editor font size to 10 point and increased window height
+  to provide a better initial impression on Windows.
+
+- Options / Fonts/Tabs / Set Base Editor Font: List box was not highlighting
+  the default font when first installed on Windows.  SF 661676
+
+- Added Autosave feature: when user runs code from edit window, if the file
+  has been modified IDLE will silently save it if Autosave is enabled.  The
+  option is set in the Options dialog, and the default is to prompt the
+  user to save the file.   SF 661318 Bruce Sherwood patch.
+
+- Improved the RESTART annotation in the shell window when the user restarts
+  the shell while it is generating output.  Also improved annotation when user
+  repeatedly hammers the Ctrl-F6 restart.
+
+- Allow IDLE to run when not installed and cwd is not the IDLE directory
+  SF Patch 686254 "Run IDLEfork from any directory without set-up" - Raphael
+
+- When a module is run from an EditorWindow: if its directory is not in
+  sys.path, prepend it.  This allows the module to import other modules in
+  the same directory.  Do the same for a script run from the command line.
+
+- Correctly restart the subprocess if it is running user code and the user
+  attempts to run some other module or restarts the shell.  Do the same if
+  the link is broken and it is possible to restart the subprocess and re-
+  connect to the GUI.   SF RFE 661321.
+
+- Improved exception reporting when running commands or scripts from the
+  command line.
+
+- Added a -n command line switch to start IDLE without the subprocess.
+  Removed the Shell menu when running in that mode.  Updated help messages.
+
+- Added a comment to the shell startup header to indicate when IDLE is not
+  using the subprocess.
+
+- Restore the ability to run without the subprocess.  This can be important for
+  some platforms or configurations.  (Running without the subprocess allows the
+  debugger to trace through parts of IDLE itself, which may or may not be
+  desirable, depending on your point of view.  In addition, the traditional
+  reload/import tricks must be use if user source code is changed.)  This is
+  helpful for developing IDLE using IDLE, because one instance can be used to
+  edit the code and a separate instance run to test changes.  (Multiple
+  concurrent IDLE instances with subprocesses is a future feature)
+
+- Improve the error message a user gets when saving a file with non-ASCII
+  characters and no source encoding is specified.  Done by adding a dialog
+  'EncodingMessage', which contains the line to add in a fixed-font entry
+  widget, and which has a button to add that line to the file automatically.
+  Also, add a configuration option 'EditorWindow/encoding', which has three
+  possible values: none, utf-8, and locale. None is the default: IDLE will show
+  this dialog when non-ASCII characters are encountered. utf-8 means that files
+  with non-ASCII characters are saved as utf-8-with-bom. locale means that
+  files are saved in the locale's encoding; the dialog is only displayed if the
+  source contains characters outside the locale's charset.  SF 710733 - Loewis
+
+- Improved I/O response by tweaking the wait parameter in various
+  calls to signal.signal().
+
+- Implemented a threaded subprocess which allows interrupting a pass
+  loop in user code using the 'interrupt' extension.  User code runs
+  in MainThread, while the RPCServer is handled by SockThread.  This is
+  necessary because Windows doesn't support signals.
+
+- Implemented the 'interrupt' extension module, which allows a subthread
+  to raise a KeyboardInterrupt in the main thread.
+
+- Attempting to save the shell raised an error related to saving
+  breakpoints, which are not implemented in the shell
+
+- Provide a correct message when 'exit' or 'quit' are entered at the
+  IDLE command prompt  SF 695861
+
+- Eliminate extra blank line in shell output caused by not flushing
+  stdout when user code ends with an unterminated print. SF 695861
+
+- Moved responsibility for exception formatting (i.e. pruning IDLE internal
+  calls) out of rpc.py into the client and server.
+
+- Exit IDLE cleanly even when doing subprocess I/O
+
+- Handle subprocess interrupt with an RPC message.
+
+- Restart the subprocess if it terminates itself. (VPython programs do that)
+
+- Support subclassing of exceptions, including in the shell, by moving the
+  exception formatting to the subprocess.
+
+
+What's New in IDLEfork 0.9 Alpha 2?
+===================================
+*Release date: 27-Jan-2003*
+
+- Updated INSTALL.txt to claify use of the python2 rpm.
+
+- Improved formatting in IDLE Help.
+
+- Run menu: Replace "Run Script" with "Run Module".
+
+- Code encountering an unhandled exception under the debugger now shows
+  the correct traceback, with IDLE internal levels pruned out.
+
+- If an exception occurs entirely in IDLE, don't prune the IDLE internal
+  modules from the traceback displayed.
+
+- Class Browser and Path Browser now use Alt-Key-2 for vertical zoom.
+
+- IDLE icons will now install correctly even when setup.py is run from the
+  build directory
+
+- Class Browser now compatible with Python2.3 version of pyclbr.py
+
+- Left cursor move in presence of selected text now moves from left end
+  of the selection.
+
+- Add Meta keybindings to "IDLE Classic Windows" to handle reversed
+  Alt/Meta on some Linux distros.
+
+- Change default: IDLE now starts with Python Shell.
+
+- Removed the File Path from the Additional Help Sources scrolled list.
+
+- Add capability to access Additional Help Sources on the web if the
+  Help File Path begins with //http or www.  (Otherwise local path is
+  validated, as before.)
+
+- Additional Help Sources were not being posted on the Help menu in the
+  order entered.  Implement sorting the list by [HelpFiles] 'option'
+  number.
+
+- Add Browse button to New Help Source dialog.  Arrange to start in
+  Python/Doc if platform is Windows, otherwise start in current directory.
+
+- Put the Additional Help Sources directly on the Help menu instead of in
+  an Extra Help cascade menu.  Rearrange the Help menu so the Additional
+  Help Sources come last.  Update help.txt appropriately.
+
+- Fix Tk root pop-ups in configSectionNameDialog.py  and configDialog.py
+
+- Uniform capitalization in General tab of ConfigDialog, update the doc string.
+
+- Fix bug in ConfigDialog where SaveAllChangedConfig() was unexpectedly
+  deleting Additional Help Sources from the user's config file.
+
+- Make configHelpSourceEdit OK button the default and bind <Return>
+
+- Fix Tk root pop-ups in configHelpSourceEdit: error dialogs not attached
+  to parents.
+
+- Use os.startfile() to open both Additional Help and Python Help on the
+  Windows platform.  The application associated with the file type will act as
+  the viewer.  Windows help files (.chm) are now supported via the
+  Settings/General/Additional Help facility.
+
+- If Python Help files are installed locally on Linux, use them instead of
+  accessing python.org.
+
+- Make the methods for finding the Python help docs more robust, and make
+  them work in the installed configuration, also.
+
+- On the Save Before Run dialog, make the OK button the default.  One
+  less mouse action!
+
+- Add a method: EditorWindow.get_geometry() for future use in implementing
+  window location persistence.
+
+- Removed the "Help/Advice" menu entry.  Thanks, David!  We'll remember!
+
+- Change the "Classic Windows" theme's paste key to be <ctrl-v>.
+
+- Rearrange the Shell menu to put Stack Viewer entries adjacent.
+
+- Add the ability to restart the subprocess interpreter from the shell window;
+  add an associated menu entry "Shell/Restart" with binding Control-F6.  Update
+  IDLE help.
+
+- Upon a restart, annotate the shell window with a "restart boundary".  Add a
+  shell window menu "Shell/View Restart" with binding F6 to jump to the most
+  recent restart boundary.
+
+- Add Shell menu to Python Shell; change "Settings" to "Options".
+
+- Remove incorrect comment in setup.py: IDLEfork is now installed as a package.
+
+- Add INSTALL.txt, HISTORY.txt, NEWS.txt to installed configuration.
+
+- In installer text, fix reference to Visual Python, should be VPython.
+  Properly credit David Scherer.
+
+- Modified idle, idle.py, idle.pyw to improve exception handling.
+
+
+What's New in IDLEfork 0.9 Alpha 1?
+===================================
+*Release date: 31-Dec-2002*
+
+- First release of major new functionality.  For further details refer to
+  Idle-dev and/or the Sourceforge CVS.
+
+- Adapted to the Mac platform.
+
+- Overhauled the IDLE startup options and revised the idle -h help message,
+  which provides details of command line usage.
+
+- Multiple bug fixes and usability enhancements.
+
+- Introduced the new RPC implementation, which includes a debugger.  The output
+  of user code is to the shell, and the shell may be used to inspect the
+  environment after the run has finished.  (In version 0.8.1 the shell
+  environment was separate from the environment of the user code.)
+
+- Introduced the configuration GUI and a new About dialog.
+
+- Removed David Scherer's Remote Procedure Call code and replaced with Guido
+  van Rossum's.  GvR code has support for the IDLE debugger and uses the shell
+  to inspect the environment of code Run from an Edit window.  Files removed:
+  ExecBinding.py, loader.py, protocol.py, Remote.py, spawn.py
+
+--------------------------------------------------------------------
+Refer to HISTORY.txt for additional information on earlier releases.
+--------------------------------------------------------------------
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/News3.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/News3.txt
new file mode 100644
index 0000000000000000000000000000000000000000..da3a1458111d7a5a2e7dbd385677d713b8dfff05
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/News3.txt
@@ -0,0 +1,1415 @@
+What's New in IDLE 3.14.z
+(since 3.14.0)
+Released after 2025-10-07
+=========================
+
+
+gh-143774: Better explain the operation of Format / Format Paragraph.
+Patch by Terry J. Reedy.
+
+gh-139742: Colorize t-string prefixes for template strings in IDLE,
+as done for f-string prefixes.  Patch by Anuradha Agrawal.
+
+What's New in IDLE 3.14.0
+(since 3.13.0)
+Released on 2025-10-07
+=========================
+
+gh-129873: Simplify displaying the IDLE doc by only copying the text
+section of idle.html to idlelib/help.html. Patch by Stan Ulbrych.
+
+gh-112936: IDLE - Include Shell menu in single-process mode,
+though with Restart Shell and View Last Restart disabled.
+Patch by Zhikang Yan.
+
+gh-112938: IDLE - Fix uninteruptable hang when Shell gets
+rapid continuous output.
+
+gh-127060: Set TERM environment variable to 'dumb' to not add ANSI escape
+sequences for text color in tracebacks. IDLE does not understand them.
+Patch by Victor Stinner.
+
+gh-122392: Increase currently inadequate vertical spacing for the IDLE
+browsers (path, module, and stack) on high-resolution monitors.
+
+
+What's New in IDLE 3.13.0
+(since 3.12.0)
+Released on 2024-10-07
+=========================
+
+gh-120104: Fix padding in config and search dialog windows in IDLE.
+
+gh-120083: Add explicit black IDLE Hovertip foreground color needed for
+recent macOS. Fixes Sonoma showing unreadable white on pale yellow.
+Patch by John Riggles.
+
+gh-122482: Change About IDLE to direct users to discuss.python.org
+instead of the now unused idle-dev email and mailing list.
+
+gh-78889: Stop Shell freezes by blocking user access to non-method
+sys.stdout.shell attributes, which are all private.
+
+gh-78955: Use user-selected color theme for Help => IDLE Doc.
+
+gh-96905: In idlelib code, stop redefining built-ins 'dict' and 'object'.
+
+gh-72284: Improve the lists of features, editor key bindings,
+and shell key bingings in the IDLE doc.
+
+gh-113903: Fix rare failure of test.test_idle, in test_configdialog.
+
+gh-113729: Fix the "Help -> IDLE Doc" menu bug in 3.11.7 and 3.12.1.
+
+gh-57795: Enter selected text into the Find box when opening
+a Replace dialog.  Patch by  Roger Serwy and Zackery Spytz.
+
+gh-113269: Fix test_editor hang on macOS Catalina.
+Patch by Terry Reedy.
+
+gh-112939: Fix processing unsaved files when quitting IDLE on macOS.
+Patch by Ronald Oussoren and Christopher Chavez.
+
+gh-79871: Add docstrings to debugger.py.  Fix two bugs in
+test_debugger and expand coverage by 47%.  Patch by Anthony Shaw.
+
+
+What's New in IDLE 3.12.0
+(since 3.11.0)
+Released on 2023-10-02
+=========================
+
+gh-104719: Remove IDLE's modification of tokenize.tabsize and test
+other uses of tokenize data and methods.
+
+gh-104499: Fix completions for Tk Aqua 8.7 (currently blank).
+
+gh-104486: Make About print both tcl and tk versions if different,
+as is expected someday.
+
+gh-88496 Fix IDLE test hang on macOS.
+
+gh-103314 Support sys.last_exc after exceptions in Shell.
+Patch by Irit Katriel.
+
+
+What's New in IDLE 3.11.0
+(since 3.10.0)
+Released on 2022-10-24
+=========================
+
+gh-97527: Fix a bug in the previous bugfix that caused IDLE to not
+start when run with 3.10.8, 3.12.0a1, and at least Microsoft Python
+3.10.2288.0 installed without the Lib/test package.  3.11.0 was never
+affected.
+
+gh-65802: Document handling of extensions in Save As dialogs.
+
+gh-95191: Include prompts when saving Shell (interactive input/output).
+
+gh-95511: Fix the Shell context menu copy-with-prompts bug of copying
+an extra line when one selects whole lines.
+
+gh-95471: Tweak Edit menu. Move 'Select All' above 'Cut' as it is used
+with 'Cut' and 'Copy' but not 'Paste'.  Add a separator between 'Replace'
+and 'Go to Line' to help IDLE issue triagers.
+
+gh-95411: Enable using IDLE's module browser with .pyw files.
+
+gh-89610: Add .pyi as a recognized extension for IDLE on macOS.  This allows
+opening stub files by double clicking on them in the Finder.
+
+bpo-28950: Apply IDLE syntax highlighting to `.pyi` files.  Add util.py
+for common components.  Patch by Alex Waygood and Terry Jan Reedy.
+
+bpo-46630: Make query dialogs on Windows start with a cursor in the
+entry box.
+
+bpo-46591: Make the IDLE doc URL on the About IDLE dialog clickable.
+
+bpo-45296: Clarify close, quit, and exit in IDLE.  In the File menu,
+'Close' and 'Exit' are now 'Close Window' (the current one) and 'Exit'
+is now 'Exit IDLE' (by closing all windows).  In Shell, 'quit()' and
+'exit()' mean 'close Shell'.  If there are no other windows,
+this also exits IDLE.
+
+bpo-45495: Add context keywords 'case' and 'match' to completions list.
+
+bpo-45296: On Windows, change exit/quit message to suggest Ctrl-D, which
+works, instead of <Ctrl-Z Return>, which does not work in IDLE.
+
+
+What's New in IDLE 3.10.0
+(since 3.9.0)
+Released on 2021-10-04
+=========================
+
+bpo-45193: Make completion boxes appear on Ubuntu again.
+
+bpo-40128: Mostly fix completions on macOS when not using tcl/tk 8.6.11
+(as with 3.9).
+
+bpo-33962: Move the indent space setting from the Font tab to the new Windows
+tab. Patch by Mark Roseman and Terry Jan Reedy.
+
+bpo-40468: Split the settings dialog General tab into Windows and Shell/Ed
+tabs. Move help sources, which extend the Help menu, to the Extensions tab.
+Make space for new options and shorten the dialog. The latter makes the
+dialog better fit small screens.
+
+bpo-44010: Highlight the new match statement's soft keywords: match, case,
+and _. This highlighting is not perfect and will be incorrect in some rare
+cases, especially for some _s in case patterns.
+
+bpo-44026: Include interpreter's typo fix suggestions in message line
+for NameErrors and AttributeErrors.  Patch by E. Paine.
+
+bpo-41611: Avoid occasional uncaught exceptions and freezing when using
+completions on macOS.
+
+bpo-37903: Add mouse actions to the shell sidebar.  Left click and
+optional drag selects one or more lines of text, as with the
+editor line number sidebar.  Right click after selecting text lines
+displays a context menu with 'copy with prompts'.  This zips together
+prompts from the sidebar with lines from the selected text.  This option
+also appears on the context menu for the text.
+
+bpo-43981: Fix reference leaks in test_sidebar and test_squeezer.
+Patches by Terry Jan Reedy and Pablo Galindo
+
+bpo-37892: Change Shell input indents from tabs to spaces.  Shell input
+now 'looks right'.  Making this feasible motivated the shell sidebar.
+
+bpo-37903: Move the Shell input prompt to a side bar.
+
+bpo-43655: Make window managers on macOS and X Window recognize
+IDLE dialog windows as dialogs.
+
+bpo-42225: Document that IDLE can fail on Unix either from misconfigured IP
+masquerade rules or failure displaying complex colored (non-ascii) characters.
+
+bpo-43283: Document why printing to IDLE's Shell is often slower than
+printing to a system terminal and that it can be made faster by
+pre-formatting a single string before printing.
+
+bpo-23544: Disable Debug=>Stack Viewer when user code is running or
+Debugger is active, to prevent hang or crash.  Patch by Zackery Spytz.
+
+bpo-43008: Make IDLE invoke :func:`sys.excepthook` in normal,
+2-process mode.  User hooks were previously ignored.
+Patch by Ken Hilton.
+
+bpo-33065: Fix problem debugging user classes with __repr__ method.
+
+bpo-32631: Finish zzdummy example extension module: make menu entries
+work; add docstrings and tests with 100% coverage.
+
+bpo-42508: Keep IDLE running on macOS.  Remove obsolete workaround
+that prevented running files with shortcuts when using new universal2
+installers built on macOS 11.
+
+bpo-42426: Fix reporting offset of the RE error in searchengine.
+
+bpo-42416: Display docstrings in IDLE calltips in more cases,
+by using inspect.getdoc.
+
+bpo-33987: Mostly finish using ttk widgets, mainly for editor,
+settings, and searches.  Some patches by Mark Roseman.
+
+bpo-40511: Stop unnecessary "flashing" when typing opening and closing
+parentheses inside the parentheses of a function call.
+
+bpo-38439: Add a 256x256 pixel IDLE icon to the Windows .ico file. Created by
+Andrew Clover. Remove the low-color gif variations from the .ico file.
+
+bpo-41775: Make 'IDLE Shell' the shell title.
+
+bpo-35764: Rewrite the Calltips doc section.
+
+bpo-40181: In calltips, stop reminding that '/' marks the end of
+positional-only arguments.
+
+
+What's New in IDLE 3.9.0 (since 3.8.0)
+Released on 2020-10-05?
+======================================
+
+bpo-41468: Improve IDLE run crash error message (which users should
+never see).
+
+bpo-41373: Save files loaded with no line ending, as when blank, or
+different line endings, by setting its line ending to the system
+default. Fix regression in 3.8.4 and 3.9.0b4.
+
+bpo-41300: Save files with non-ascii chars.  Fix regression in
+3.9.0b4 and 3.8.4.
+
+bpo-37765: Add keywords to module name completion list.  Rewrite
+Completions section of IDLE doc.
+
+bpo-41152: The encoding of ``stdin``, ``stdout`` and ``stderr`` in IDLE
+is now always UTF-8.
+
+bpo-41144: Make Open Module open a special module such as os.path.
+
+bpo-40723: Make test_idle pass when run after import.
+Patch by Florian Dahlitz.
+
+bpo-38689: IDLE will no longer freeze when inspect.signature fails
+when fetching a calltip.
+
+bpo-27115: For 'Go to Line', use a Query entry box subclass with
+IDLE standard behavior and improved error checking.
+
+bpo-39885: When a context menu is invoked by right-clicking outside
+of a selection, clear the selection and move the cursor.  Cut and
+Copy require that the click be within the selection.
+
+bpo-39852: Edit "Go to line" now clears any selection, preventing
+accidental deletion.  It also updates Ln and Col on the status bar.
+
+bpo-39781: Selecting code context lines no longer causes a jump.
+
+bpo-39663: Add tests for pyparse find_good_parse_start().
+
+bpo-39600: Remove duplicate font names from configuration list.
+
+bpo-38792: Close a shell calltip if a :exc:`KeyboardInterrupt`
+or shell restart occurs.  Patch by Zackery Spytz.
+
+bpo-30780: Add remaining configdialog tests for buttons and
+highlights and keys tabs.
+
+bpo-39388: Settings dialog Cancel button cancels pending changes.
+
+bpo-39050: Settings dialog Help button again displays help text.
+
+bpo-32989: Add tests for editor newline_and_indent_event method.
+Remove unneeded arguments and dead code from pyparse
+find_good_parse_start method.
+
+bpo-38943: Fix autocomplete windows not always appearing on some
+systems.  Patch by Johnny Najera.
+
+bpo-38944: Escape key now closes IDLE completion windows.  Patch by
+Johnny Najera.
+
+bpo-38862: 'Strip Trailing Whitespace' on the Format menu removes extra
+newlines at the end of non-shell files.
+
+bpo-38636: Fix IDLE Format menu tab toggle and file indent width. These
+functions (default shortcuts Alt-T and Alt-U) were mistakenly disabled
+in 3.7.5 and 3.8.0.
+
+bpo-4630: Add an option to toggle IDLE's cursor blink for shell,
+editor, and output windows.  See Settings, General, Window Preferences,
+Cursor Blink.  Patch by Zackery Spytz.
+
+bpo-26353: Stop adding newline when saving an IDLE shell window.
+
+bpo-38598: Do not try to compile IDLE shell or output windows.
+
+
+What's New in IDLE 3.8.0 (since 3.7.0)
+Released on 2019-10-14
+======================================
+
+bpo-36698: IDLE no longer fails when writing non-encodable characters
+to stderr.  It now escapes them with a backslash, like the regular
+Python interpreter.  Add an errors field to the standard streams.
+
+bpo-13153: Improve tkinter's handing of non-BMP (astral) unicode
+characters, such as 'rocket \U0001f680'.  Whether a proper glyph or
+replacement char is displayed depends on the OS and font.  For IDLE,
+astral chars in code interfere with editing.
+
+bpo-35379: When exiting IDLE, catch any AttributeError.  One happens
+when EditorWindow.close is called twice.  Printing a traceback, when
+IDLE is run from a terminal, is useless and annoying.
+
+bpo-38183: To avoid test issues, test_idle ignores the user config
+directory.  It no longer tries to create or access .idlerc or any files
+within.  Users must run IDLE to discover problems with saving settings.
+
+bpo-38077: IDLE no longer adds 'argv' to the user namespace when
+initializing it.  This bug only affected 3.7.4 and 3.8.0b2 to 3.8.0b4.
+
+bpo-38401: Shell restart lines now fill the window width, always start
+with '=', and avoid wrapping unnecessarily. The line will still wrap
+if the included file name is long relative to the width.
+
+bpo-37092: Add mousewheel scrolling for IDLE module, path, and stack
+browsers.  Patch by George Zhang.
+
+bpo-35771: To avoid occasional spurious test_idle failures on slower
+machines, increase the ``hover_delay`` in test_tooltip.
+
+bpo-37824: Properly handle user input warnings in IDLE shell.
+Cease turning SyntaxWarnings into SyntaxErrors.
+
+bpo-37929: IDLE Settings dialog now closes properly when there is no
+shell window.
+
+bpo-37849: Fix completions list appearing too high or low when shown
+above the current line.
+
+bpo-36419: Refactor autocompete and improve testing.
+
+bpo-37748: Reorder the Run menu.  Put the most common choice,
+Run Module, at the top.
+
+bpo-37692: Improve highlight config sample with example shell
+interaction and better labels for shell elements.
+
+bpo-37628: Settings dialog no longer expands with font size.
+The font and highlight sample boxes gain scrollbars instead.
+
+bpo-17535: Add optional line numbers for IDLE editor windows.
+
+bpo-37627: Initialize the Customize Run dialog with the command line
+arguments most recently entered before.  The user can optionally edit
+before submitting them.
+
+bpo-33610: Code context always shows the correct context when toggled on.
+
+bpo-36390: Gather Format menu functions into format.py.  Combine
+paragraph.py, rstrip.py, and format methods from editor.py.
+
+bpo-37530: Optimize code context to reduce unneeded background activity.
+Font and highlight changes now occur along with text changes instead
+of after a random delay.
+
+bpo-27452: Cleanup config.py by inlining RemoveFile and simplifying
+the handling of __file__ in CreateConfigHandlers/
+
+bpo-26806: To compensate for stack frames added by IDLE and avoid
+possible problems with low recursion limits, add 30 to limits in the
+user code execution process.  Subtract 30 when reporting recursion
+limits to make this addition mostly transparent.
+
+bpo-37325: Fix tab focus traversal order for help source and custom
+run dialogs.
+
+bpo-37321: Both subprocess connection error messages now refer to
+the 'Startup failure' section of the IDLE doc.
+
+bpo-37177: Properly attach search dialogs to their main window so
+that they behave like other dialogs and do not get hidden behind
+their main window.
+
+bpo-37039: Adjust "Zoom Height" to individual screens by momentarily
+maximizing the window on first use with a particular screen.  Changing
+screen settings may invalidate the saved height.  While a window is
+maximized, "Zoom Height" has no effect.
+
+bpo-35763: Make calltip reminder about '/' meaning positional-only less
+obtrusive by only adding it when there is room on the first line.
+
+bpo-5680: Add 'Run Customized' to the Run menu to run a module with
+customized settings. Any command line arguments entered are added
+to sys.argv. One can suppress the normal Shell main module restart.
+
+bpo-35610: Replace now redundant editor.context_use_ps1 with
+.prompt_last_line.  This finishes change started in bpo-31858.
+
+bpo-32411: Stop sorting dict created with desired line order.
+
+bpo-37038: Make idlelib.run runnable; add test clause.
+
+bpo-36958: Print any argument other than None or int passed to
+SystemExit or sys.exit().
+
+bpo-36807: When saving a file, call file.flush() and os.fsync()
+so bits are flushed to e.g. a USB drive.
+
+bpo-36429: Fix starting IDLE with pyshell.
+Add idlelib.pyshell alias at top; remove pyshell alias at bottom.
+Remove obsolete __name__=='__main__' command.
+
+bpo-30348: Increase test coverage of idlelib.autocomplete by 30%.
+Patch by Louie Lu.
+
+bpo-23205: Add tests and refactor grep's findfiles.
+
+bpo-36405: Use dict unpacking in idlelib.
+
+bpo-36396: Remove fgBg param of idlelib.config.GetHighlight().
+This param was only used twice and changed the return type.
+
+bpo-23216: IDLE: Add docstrings to search modules.
+
+bpo-36176: Fix IDLE autocomplete & calltip popup colors.
+Prevent conflicts with Linux dark themes
+(and slightly darken calltip background).
+
+bpo-36152: Remove colorizer.ColorDelegator.close_when_done and the
+corresponding argument of .close().  In IDLE, both have always been
+None or False since 2007.
+
+bpo-36096: Make colorizer state variables instance-only.
+
+bpo-32129: Avoid blurry IDLE application icon on macOS with Tk 8.6.
+Patch by Kevin Walzer.
+
+bpo-24310: Document settings dialog font tab sample.
+
+bpo-35689: Add docstrings and tests for colorizer.
+
+bpo-35833: Revise IDLE doc for control codes sent to Shell.
+Add a code example block.
+
+bpo-35770: IDLE macosx deletes Options => Configure IDLE.
+It previously deleted Window => Zoom Height by mistake.
+(Zoom Height is now on the Options menu).  On Mac, the settings
+dialog is accessed via Preferences on the IDLE menu.
+
+bpo-35769: Change new file name from 'Untitled' to 'untitled'.
+
+bpo-35660: Fix imports in window module.
+
+bpo-35641: Properly format calltip for function without docstring.
+
+bpo-33987: Use ttk Frame for ttk widgets.
+
+bpo-34055: Fix erroneous 'smart' indents and newlines in IDLE Shell.
+
+bpo-28097: Add Previous/Next History entries to Shell menu.
+
+bpo-35591: Find Selection now works when selection not found.
+
+bpo-35598: Update config_key: use PEP 8 names and ttk widgets,
+make some objects global, and add tests.
+
+bpo-35196: Speed up squeezer line counting.
+
+bpo-35208: Squeezer now counts wrapped lines before newlines.
+
+bpo-35555: Gray out Code Context menu entry when it's not applicable.
+
+bpo-22703: Improve the Code Context and Zoom Height menu labels.
+The Code Context menu label now toggles between Show/Hide Code Context.
+The Zoom Height menu now toggles between Zoom/Restore Height.
+Zoom Height has moved from the Window menu to the Options menu.
+
+bpo-35521: Document the editor code context feature.
+Add some internal references within the IDLE doc.
+
+bpo-34864: When starting IDLE on MacOS, warn if the system setting
+"Prefer tabs when opening documents" is "Always".  As previous
+documented for this issue, running IDLE with this setting causes
+problems.  If the setting is changed while IDLE is running,
+there will be no warning until IDLE is restarted.
+
+bpo-35213: Where appropriate, use 'macOS' in idlelib.
+
+bpo-34864: Document two IDLE on MacOS issues.  The System Preferences
+Dock "prefer tabs always" setting disables some IDLE features.
+Menus are a bit different than as described for Windows and Linux.
+
+bpo-35202: Remove unused imports in idlelib.
+
+bpo-33000: Document that IDLE's shell has no line limit.
+A program that runs indefinitely can overfill memory.
+
+bpo-23220: Explain how IDLE's Shell displays output.
+Add new subsection "User output in Shell".
+
+bpo-35099: Improve the doc about IDLE running user code.
+"IDLE -- console differences" is renamed "Running user code".
+It mostly covers the implications of using custom sys.stdxxx objects.
+
+bpo-35097: Add IDLE doc subsection explaining editor windows.
+Topics include opening, title and status bars, .py* extension, and running.
+
+Issue 35093: Document the IDLE document viewer in the IDLE doc.
+Add a paragraph in "Help and preferences", "Help sources" subsection.
+
+bpo-1529353: Explain Shell text squeezing in the IDLE doc.
+
+bpo-35088: Update idlelib.help.copy_string docstring.
+We now use git and backporting instead of hg and forward merging.
+
+bpo-35087: Update idlelib help files for the current doc build.
+The main change is the elimination of chapter-section numbers.
+
+bpo-1529353: Output over N lines (50 by default) is squeezed down to a button.
+N can be changed in the PyShell section of the General page of the
+Settings dialog.  Fewer, but possibly extra long, lines can be squeezed by
+right clicking on the output.  Squeezed output can be expanded in place
+by double-clicking the button or into the clipboard or a separate window
+by right-clicking the button.
+
+bpo-34548: Use configured color theme for read-only text views.
+
+bpo-33839: Refactor ToolTip and CallTip classes; add documentation
+and tests.
+
+bpo-34047: Fix mouse wheel scrolling direction on macOS.
+
+bpo-34275: Make calltips always visible on Mac.
+Patch by Kevin Walzer.
+
+bpo-34120: Fix freezing after closing some dialogs on Mac.
+This is one of multiple regressions from using newer tcl/tk.
+
+bpo-33975: Avoid small type when running htests.
+Since part of the purpose of human-viewed tests is to determine that
+widgets look right, it is important that they look the same for
+testing as when running IDLE.
+
+bpo-33905: Add test for idlelib.stackview.StackBrowser.
+
+bpo-33924: Change mainmenu.menudefs key 'windows' to 'window'.
+Every other menudef key is the lowercase version of the
+corresponding main menu entry (in this case, 'Window').
+
+bpo-33906: Rename idlelib.windows as window
+Match Window on the main menu and remove last plural module name.
+Change imports, test, and attribute references to match new name.
+
+bpo-33917: Fix and document idlelib/idle_test/template.py.
+The revised file compiles, runs, and tests OK.  idle_test/README.txt
+explains how to use it to create new IDLE test files.
+
+bpo-33904: In rstrip module, rename class RstripExtension as Rstrip.
+
+bpo-33907: For consistency and clarity, rename calltip objects.
+Module calltips and its class CallTips are now calltip and Calltip.
+In module calltip_w, class CallTip is now CalltipWindow.
+
+bpo-33855: Minimally test all IDLE modules.
+Standardize the test file format.  Add missing test files that import
+the tested module and perform at least one test.  Check and record the
+coverage of each test.
+
+bpo-33856: Add 'help' to Shell's initial welcome message.
+
+
+What's New in IDLE 3.7.0 (since 3.6.0)
+Released on 2018-06-27
+======================================
+
+bpo-33656: On Windows, add API call saying that tk scales for DPI.
+On Windows 8.1+ or 10, with DPI compatibility properties of the Python
+binary unchanged, and a monitor resolution greater than 96 DPI, this
+should make text and lines sharper and some colors brighter.
+On other systems, it should have no effect.  If you have a custom theme,
+you may want to adjust a color or two.  If perchance it make text worse
+on your monitor, you can disable the ctypes.OleDLL call near the top of
+pyshell.py and report the problem on python-list or idle-dev@python.org.
+
+bpo-33768: Clicking on a context line moves that line to the top
+of the editor window.
+
+bpo-33763: Replace the code context label widget with a text widget.
+
+bpo-33664: Scroll IDLE editor text by lines.
+(Previously, the mouse wheel and scrollbar slider moved text by a fixed
+number of pixels, resulting in partial lines at the top of the editor
+box.)  This change also applies to the shell and grep output windows,
+but currently not to read-only text views.
+
+bpo-33679: Enable theme-specific color configuration for Code Context.
+(Previously, there was one code context foreground and background font
+color setting, default or custom, on the extensions tab, that applied
+to all themes.)  For built-in themes, the foreground is the same as
+normal text and the background is a contrasting gray.  Context colors for
+custom themes are set on the Highlights tab along with other colors.
+When one starts IDLE from a console and loads a custom theme without
+definitions for 'context', one will see a warning message on the
+console.
+
+bpo-33642: Display up to maxlines non-blank lines for Code Context.
+If there is no current context, show a single blank line.  (Previously,
+the Code Context had numlines lines, usually with some blank.)  The use
+of a new option, 'maxlines' (default 15), avoids possible interference
+with user settings of the old option, 'numlines' (default 3).
+
+bpo-33628: Cleanup codecontext.py and its test.
+
+bpo-32831: Add docstrings and tests for codecontext.py.
+Coverage is 100%.  Patch by Cheryl Sabella.
+
+bpo-33564: Code context now recognizes async as a block opener.
+
+bpo-21474: Update word/identifier definition from ascii to unicode.
+In text and entry boxes, this affects selection by double-click,
+movement left/right by control-left/right, and deletion left/right
+by control-BACKSPACE/DEL.
+
+bpo-33204: Consistently color invalid string prefixes.
+A 'u' string prefix cannot be paired with either 'r' or 'f'.
+IDLE now consistently colors as much of the prefix, starting at the
+right, as is valid.  Revise and extend colorizer test.
+
+bpo-32984: Set __file__ while running a startup file.
+Like Python, IDLE optionally runs 1 startup file in the Shell window
+before presenting the first interactive input prompt.  For IDLE,
+option -s runs a file named in environmental variable IDLESTARTUP or
+PYTHONSTARTUP; -r file runs file.  Python sets __file__ to the startup
+file name before running the file and unsets it before the first
+prompt.  IDLE now does the same when run normally, without the -n
+option.
+
+bpo-32940: Replace StringTranslatePseudoMapping with faster code.
+
+bpo-32916: Change 'str' to 'code' in idlelib.pyparse and users.
+
+bpo-32905: Remove unused code in pyparse module.
+
+bpo-32874: IDLE - add pyparse tests with 97% coverage.
+
+bpo-32837: IDLE - require encoding argument for textview.view_file.
+Using the system and place-dependent default encoding for open()
+is a bad idea for IDLE's system and location-independent files.
+
+bpo-32826: Add "encoding=utf-8" to open() in IDLE's test_help_about.
+GUI test test_file_buttons() only looks at initial ascii-only lines,
+but failed on systems where open() defaults to 'ascii' because
+readline() internally reads and decodes far enough ahead to encounter
+a non-ascii character in CREDITS.txt.
+
+bpo-32765: Update configdialog General tab create page docstring.
+Add new widgets to the widget list.
+
+bpo-32207: Improve tk event exception tracebacks in IDLE.
+When tk event handling is driven by IDLE's run loop, a confusing
+and distracting queue.EMPTY traceback context is no longer added
+to tk event exception tracebacks.  The traceback is now the same
+as when event handling is driven by user code.  Patch based on
+a suggestion by Serhiy Storchaka.
+
+bpo-32164: Delete unused file idlelib/tabbedpages.py.
+Use of TabbedPageSet in configdialog was replaced by ttk.Notebook.
+
+bpo-32100: Fix old and new bugs in pathbrowser; improve tests.
+Patch mostly by Cheryl Sabella.
+
+bpo-31860: The font sample in the settings dialog is now editable.
+Edits persist while IDLE remains open.
+Patch by Serhiy Storchake and Terry Jan Reedy.
+
+bpo-31858: Restrict shell prompt manipulation to the shell.
+Editor and output windows only see an empty last prompt line.  This
+simplifies the code and fixes a minor bug when newline is inserted.
+Sys.ps1, if present, is read on Shell start-up, but is not set or changed.
+Patch by Terry Jan Reedy.
+
+bpo-28603: Fix a TypeError that caused a shell restart when printing
+a traceback that includes an exception that is unhashable.
+Patch by Zane Bitter.
+
+bpo-13802: Use non-Latin characters in the Font settings sample.
+Even if one selects a font that defines a limited subset of the unicode
+Basic Multilingual Plane, tcl/tk will use other fonts that define a
+character.  The expanded example give users of non-Latin characters
+a better idea of what they might see in the shell and editors.
+
+To make room for the expanded sample, frames on the Font tab are
+re-arranged.  The Font/Tabs help explains a bit about the additions.
+Patch by Terry Jan Reedy
+
+bpo-31460: Simplify the API of IDLE's Module Browser.
+Passing a widget instead of an flist with a root widget opens the
+option of creating a browser frame that is only part of a window.
+Passing a full file name instead of pieces assumed to come from a
+.py file opens the possibility of browsing python files that do not
+end in .py.
+
+bpo-31649: Make _htest and _utest parameters keyword-only.
+These are used to adjust code for human and unit tests.
+
+bpo-31459: Rename module browser from Class Browser to Module Browser.
+The original module-level class and method browser became a module
+browser, with the addition of module-level functions, years ago.
+Nested classes and functions were added yesterday.  For back-
+compatibility, the virtual event <<open-class-browser>>, which
+appears on the Keys tab of the Settings dialog, is not changed.
+Patch by Cheryl Sabella.
+
+bpo-1612262: Module browser now shows nested classes and functions.
+Original patches for code and tests by Guilherme Polo and
+Cheryl Sabella, respectively.  Revisions by Terry Jan Reedy.
+
+bpo-31500: Tk's default fonts now are scaled on HiDPI displays.
+This affects all dialogs.  Patch by Serhiy Storchaka.
+
+bpo-31493: Fix code context update and font update timers.
+Canceling timers prevents a warning message when test_idle completes.
+
+bpo-31488: Update non-key options in former extension classes.
+When applying configdialog changes, call .reload for each feature class.
+Change ParenMatch so updated options affect existing instances attached
+to existing editor windows.
+
+bpo-31477: Improve rstrip entry in IDLE doc.
+Strip Trailing Whitespace strips more than blank spaces.
+Multiline string literals are not skipped.
+
+bpo-31480: fix tests to pass with zzdummy extension disabled. (#3590)
+To see the example in action, enable it on options extensions tab.
+
+bpo-31421: Document how IDLE runs tkinter programs.
+IDLE calls tcl/tk update in the background in order to make live
+interaction and experimentation with tkinter applications much easier.
+
+bpo-31414: Fix tk entry box tests by deleting first.
+Adding to an int entry is not the same as deleting and inserting
+because int('') will fail.  Patch by Terry Jan Reedy.
+
+bpo-27099: Convert IDLE's built-in 'extensions' to regular features.
+  About 10 IDLE features were implemented as supposedly optional
+extensions.  Their different behavior could be confusing or worse for
+users and not good for maintenance.  Hence the conversion.
+  The main difference for users is that user configurable key bindings
+for builtin features are now handled uniformly.  Now, editing a binding
+in a keyset only affects its value in the keyset.  All bindings are
+defined together in the system-specific default keysets in config-
+extensions.def.  All custom keysets are saved as a whole in config-
+extension.cfg.  All take effect as soon as one clicks Apply or Ok.
+   The affected events are '<<force-open-completions>>',
+'<<expand-word>>', '<<force-open-calltip>>', '<<flash-paren>>',
+'<<format-paragraph>>', '<<run-module>>', '<<check-module>>', and
+'<<zoom-height>>'.  Any (global) customizations made before 3.6.3 will
+not affect their keyset-specific customization after 3.6.3. and vice
+versa.
+  Initial patch by Charles Wohlganger, revised by Terry Jan Reedy.
+
+bpo-31051:  Rearrange configdialog General tab.
+Sort non-Help options into Window (Shell+Editor) and Editor (only).
+Leave room for the addition of new options.
+Patch by Terry Jan Reedy.
+
+bpo-30617: Add docstrings and tests for outwin subclass of editor.
+Move some data and functions from the class to module level.
+Patch by Cheryl Sabella.
+
+bpo-31287: Do not modify tkinter.messagebox in test_configdialog.
+Instead, mask it with an instance mock that can be deleted.
+Patch by Terry Jan Reedy.
+
+bpo-30781: Use ttk widgets in ConfigDialog pages.
+These should especially look better on MacOSX.
+Patches by Terry Jan Reedy and Cheryl Sabella.
+
+bpo-31206: Factor HighPage(Frame) class from ConfigDialog.
+Patch by Cheryl Sabella.
+
+bp0-31001: Add tests for configdialog highlight tab.
+Patch by Cheryl Sabella.
+
+bpo-31205: Factor KeysPage(Frame) class from ConfigDialog.
+The slightly modified tests continue to pass.
+Patch by Cheryl Sabella.
+
+bpo-31002: Add tests for configdialog keys tab.
+Patch by Cheryl Sabella.
+
+bpo-19903: Change calltipes to use inspect.signature.
+Idlelib.calltips.get_argspec now uses inspect.signature instead of
+inspect.getfullargspec, like help() does.  This improves the signature
+in the call tip in a few different cases, including builtins converted
+to provide a signature.  A message is added if the object is not
+callable, has an invalid signature, or if it has positional-only
+parameters.  Patch by Louie Lu.
+
+bop-31083: Add an outline of a TabPage class in configdialog.
+Add template as comment. Update existing classes to match outline.
+Initial patch by Cheryl Sabella.
+
+bpo-31050: Factor GenPage(Frame) class from ConfigDialog.
+The slightly modified tests for the General tab continue to pass.
+Patch by Cheryl Sabella.
+
+bpo-31004: Factor FontPage(Frame) class from ConfigDialog.
+The slightly modified tests continue to pass. The General test
+broken by the switch to ttk.Notebook is fixed.
+Patch mostly by Cheryl Sabella.
+
+bpo-30781: IDLE - Use ttk Notebook in ConfigDialog.
+This improves navigation by tabbing.
+Patch by Terry Jan Reedy.
+
+bpo-31060: IDLE - Finish rearranging methods of ConfigDialog.
+Grouping methods pertaining to each tab and the buttons will aid
+writing tests and improving the tabs and will enable splitting the
+groups into classes.
+Patch by Terry Jan Reedy.
+
+bpo-30853: IDLE -- Factor a VarTrace class out of ConfigDialog.
+Instance tracers manages pairs consisting of a tk variable and a
+callback function.  When tracing is turned on, setting the variable
+calls the function.  Test coverage for the new class is 100%.
+Patch by Terry Jan Reedy.
+
+bpo-31003: IDLE: Add more tests for General tab.
+Patch by Terry Jan Reedy.
+
+bpo-30993: IDLE - Improve configdialog font page and tests.
+*In configdialog: Document causal pathways in create_font_tab
+docstring.  Simplify some attribute names. Move set_samples calls to
+var_changed_font (idea from Cheryl Sabella).  Move related functions to
+positions after the create widgets function.
+* In test_configdialog: Fix test_font_set so not order dependent.  Fix
+renamed test_indent_scale so it tests the widget.  Adjust tests for
+movement of set_samples call.  Add tests for load functions.  Put all
+font tests in one class and tab indent tests in another.  Except for
+two lines, these tests completely cover the related functions.
+Patch by Terry Jan Reedy.
+
+bpo-30981: IDLE -- Add more configdialog font page tests.
+
+bpo-28523: IDLE: replace 'colour' with 'color' in configdialog.
+
+bpo-30917: Add tests for idlelib.config.IdleConf.
+Increase coverage from 46% to 96%.
+Patch by Louie Lu.
+
+bpo-30913: Document ConfigDialog tk Vars, methods, and widgets in docstrings
+This will facilitate improving the dialog and splitting up the class.
+Original patch by Cheryl Sabella.
+
+bpo-30899: Add tests for ConfigParser subclasses in config.
+Coverage is 100% for those classes and ConfigChanges.
+Patch by Louie Lu.
+
+bpo-30881: Add docstrings to browser.py.
+Patch by Cheryl Sabella.
+
+bpo-30851: Remove unused tk variables in configdialog.
+One is a duplicate, one is set but cannot be altered by users.
+Patch by Cheryl Sabella.
+
+bpo-30870: Select font option with Up and Down keys, as well as with mouse.
+Added test increases configdialog coverage to 60%
+Patches mostly by Louie Lu.
+
+bpo-8231: Call config.IdleConf.GetUserCfgDir only once per process.
+
+bpo-30779: Factor ConfigChanges class from configdialog, put in config; test.
+* In config, put dump test code in a function; run it and unittest in
+  'if __name__ == '__main__'.
+* Add class config.ConfigChanges based on changes_class_v4.py on bpo issue.
+* Add class test_config.ChangesTest, partly using configdialog_tests_v1.py.
+* Revise configdialog to use ConfigChanges; see tracker msg297804.
+* Revise test_configdialog to match configdialog changes.
+* Remove configdialog functions unused or moved to ConfigChanges.
+Cheryl Sabella contributed parts of the patch.
+
+bpo-30777: Configdialog - add docstrings and improve comments.
+Patch by Cheryl Sabella.
+
+bpo-30495: Improve textview with docstrings, PEP8 names, and more tests.
+Split TextViewer class into ViewWindow, ViewFrame, and TextFrame classes
+so that instances of the latter two can be placed with other widgets
+within a multiframe window.
+Patches by Cheryl Sabella and Terry Jan Reedy.
+
+bpo-30723: Make several improvements to parenmatch.
+* Add 'parens' style to highlight both opener and closer.
+* Make 'default' style, which is not default, a synonym for 'opener'.
+* Make time-delay work the same with all styles.
+* Add help for config dialog extensions tab, including parenmatch.
+* Add new tests.
+Original patch by Charles Wohlganger.  Revisions by Terry Jan Reedy
+
+bpo-30674: Grep -- Add docstrings.  Patch by Cheryl Sabella.
+
+bpo-21519: IDLE's basic custom key entry dialog now detects
+duplicates properly. Original patch by Saimadhav Heblikar.
+
+bpo-29910: IDLE no longer deletes a character after commenting out a
+region by a key shortcut.  Add "return 'break'" for this and other
+potential conflicts between IDLE and default key bindings.
+Patch by Serhiy Storchaka.
+
+bpo-30728: Modernize idlelib.configdialog:
+* replace import * with specific imports;
+* lowercase method and attribute lines.
+Patch by Cheryl Sabella.
+
+bpo-6739: Verify user-entered key sequences by trying to bind them
+with to a tk widget.  Add tests for all 3 validation functions.
+Original patch by G Polo.  Tests added by Cheryl Sabella.
+Code revised and more tests added by Terry Jan Reedy
+
+bpo-24813: Add icon to help_about and make other changes.
+
+bpo-15786: Fix several problems with IDLE's autocompletion box.
+The following should now work: clicking on selection box items;
+using the scrollbar; selecting an item by hitting Return.
+Hangs on MacOSX should no longer happen. Patch by Louie Lu.
+
+bpo-25514: Add doc subsubsection about IDLE failure to start.
+Popup no-connection message directs users to this section.
+
+bpo-30642: Fix reference leaks in IDLE tests.
+Patches by Louie Lu and Terry Jan Reedy.
+
+bpo-30495: Add docstrings for textview.py and use PEP8 names.
+Patches by Cheryl Sabella and Terry Jan Reedy.
+
+bpo-30290: Help-about: use pep8 names and add tests.
+Increase coverage to 100%.
+Patches by Louie Lu, Cheryl Sabella, and Terry Jan Reedy.
+
+bpo-30303: Add _utest option to textview; add new tests.
+Increase coverage to 100%.
+Patches by Louie Lu and Terry Jan Reedy.
+
+Issue #29071: IDLE colors f-string prefixes but not invalid ur prefixes.
+
+Issue #28572: Add 10% to coverage of IDLE's test_configdialog.
+Update and augment description of the configuration system.
+
+
+What's New in IDLE 3.6.0 (since 3.5.0)
+Released on 2016-12-23
+======================================
+
+- Issue #15308: Add 'interrupt execution' (^C) to Shell menu.
+  Patch by Roger Serwy, updated by Bayard Randel.
+
+- Issue #27922: Stop IDLE tests from 'flashing' gui widgets on the screen.
+
+- Issue #27891: Consistently group and sort imports within idlelib modules.
+
+- Issue #17642: add larger font sizes for classroom projection.
+
+- Add version to title of IDLE help window.
+
+- Issue #25564: In section on IDLE -- console differences, mention that
+  using exec means that __builtins__ is defined for each statement.
+
+- Issue #27821: Fix 3.6.0a3 regression that prevented custom key sets
+  from being selected when no custom theme was defined.
+
+- Issue #27714: text_textview and test_autocomplete now pass when re-run
+  in the same process.  This occurs when test_idle fails when run with the
+  -w option but without -jn.  Fix warning from test_config.
+
+- Issue #27621: Put query response validation error messages in the query
+  box itself instead of in a separate messagebox.  Redo tests to match.
+  Add Mac OSX refinements.  Original patch by Mark Roseman.
+
+- Issue #27620: Escape key now closes Query box as cancelled.
+
+- Issue #27609: IDLE: tab after initial whitespace should tab, not
+  autocomplete. This fixes problem with writing docstrings at least
+  twice indented.
+
+- Issue #27609: Explicitly return None when there are also non-None
+  returns. In a few cases, reverse a condition and eliminate a return.
+
+- Issue #25507: IDLE no longer runs buggy code because of its tkinter imports.
+  Users must include the same imports required to run directly in Python.
+
+- Issue #27173: Add 'IDLE Modern Unix' to the built-in key sets.
+  Make the default key set depend on the platform.
+  Add tests for the changes to the config module.
+
+- Issue #27452: add line counter and crc to IDLE configHandler test dump.
+
+- Issue #27477: IDLE search dialogs now use ttk widgets.
+
+- Issue #27173: Add 'IDLE Modern Unix' to the built-in key sets.
+  Make the default key set depend on the platform.
+  Add tests for the changes to the config module.
+
+- Issue #27452: make command line "idle-test> python test_help.py" work.
+  __file__ is relative when python is started in the file's directory.
+
+- Issue #27452: add line counter and crc to IDLE configHandler test dump.
+
+- Issue #27380: IDLE: add query.py with base Query dialog and ttk widgets.
+  Module had subclasses SectionName, ModuleName, and HelpSource, which are
+  used to get information from users by configdialog and file =>Load Module.
+  Each subclass has itw own validity checks.  Using ModuleName allows users
+  to edit bad module names instead of starting over.
+  Add tests and delete the two files combined into the new one.
+
+- Issue #27372: Test_idle no longer changes the locale.
+
+- Issue #27365: Allow non-ascii chars in IDLE NEWS.txt, for contributor names.
+
+- Issue #27245: IDLE: Cleanly delete custom themes and key bindings.
+  Previously, when IDLE was started from a console or by import, a cascade
+  of warnings was emitted.  Patch by Serhiy Storchaka.
+
+- Issue #24137: Run IDLE, test_idle, and htest with tkinter default root disabled.
+  Fix code and tests that fail with this restriction.
+  Fix htests to not create a second and redundant root and mainloop.
+
+- Issue #27310: Fix IDLE.app failure to launch on OS X due to vestigial import.
+
+- Issue #5124: Paste with text selected now replaces the selection on X11.
+  This matches how paste works on Windows, Mac, most modern Linux apps,
+  and ttk widgets.  Original patch by Serhiy Storchaka.
+
+- Issue #24750: Switch all scrollbars in IDLE to ttk versions.
+  Where needed, minimal tests are added to cover changes.
+
+- Issue #24759: IDLE requires tk 8.5 and availability ttk widgets.
+  Delete now unneeded tk version tests and code for older versions.
+  Add test for IDLE syntax colorizer.
+
+- Issue #27239: idlelib.macosx.isXyzTk functions initialize as needed.
+
+- Issue #27262: move Aqua unbinding code, which enable context menus, to macosx.
+
+- Issue #24759: Make clear in idlelib.idle_test.__init__ that the directory
+  is a private implementation of test.test_idle and tool for maintainers.
+
+- Issue #27196: Stop 'ThemeChanged' warnings when running IDLE tests.
+  These persisted after other warnings were suppressed in #20567.
+  Apply Serhiy Storchaka's update_idletasks solution to four test files.
+  Record this additional advice in idle_test/README.txt
+
+- Issue #20567: Revise idle_test/README.txt with advice about avoiding
+  tk warning messages from tests.  Apply advice to several IDLE tests.
+
+- Issue # 24225: Update idlelib/README.txt with new file names
+  and event handlers.
+
+- Issue #27156: Remove obsolete code not used by IDLE.  Replacements:
+  1. help.txt, replaced by help.html, is out-of-date and should not be used.
+  Its dedicated viewer has be replaced by the html viewer in help.py.
+  2. 'import idlever; I = idlever.IDLE_VERSION' is the same as
+  'import sys; I = version[:version.index(' ')]'
+  3. After 'ob = stackviewer.VariablesTreeItem(*args)',
+  'ob.keys()' == 'list(ob.object.keys).
+  4. In macosc, runningAsOSXAPP == isAquaTk; idCarbonAquaTk == isCarbonTk
+
+- Issue #27117: Make colorizer htest and turtledemo work with dark themes.
+  Move code for configuring text widget colors to a new function.
+
+- Issue #24225: Rename many idlelib/*.py and idle_test/test_*.py files.
+  Edit files to replace old names with new names when the old name
+  referred to the module rather than the class it contained.
+  See the issue and IDLE section in What's New in 3.6 for more.
+
+- Issue #26673: When tk reports font size as 0, change to size 10.
+  Such fonts on Linux prevented the configuration dialog from opening.
+
+- Issue #21939: Add test for IDLE's percolator.
+  Original patch by Saimadhav Heblikar.
+
+- Issue #21676: Add test for IDLE's replace dialog.
+  Original patch by Saimadhav Heblikar.
+
+- Issue #18410: Add test for IDLE's search dialog.
+  Original patch by Westley Martínez.
+
+- Issue #21703: Add test for undo delegator.  Patch mostly by
+  Saimadhav Heblikar .
+
+- Issue #27044: Add ConfigDialog.remove_var_callbacks to stop memory leaks.
+
+- Issue #23977: Add more asserts to test_delegator.
+
+- Issue #20640: Add tests for idlelib.configHelpSourceEdit.
+  Patch by Saimadhav Heblikar.
+
+- In the 'IDLE-console differences' section of the IDLE doc, clarify
+  how running with IDLE affects sys.modules and the standard streams.
+
+- Issue #25507: fix incorrect change in IOBinding that prevented printing.
+  Augment IOBinding htest to include all major IOBinding functions.
+
+- Issue #25905: Revert unwanted conversion of ' to ’ RIGHT SINGLE QUOTATION
+  MARK in README.txt and open this and NEWS.txt with 'ascii'.
+  Re-encode CREDITS.txt to utf-8 and open it with 'utf-8'.
+
+- Issue 15348: Stop the debugger engine (normally in a user process)
+  before closing the debugger window (running in the IDLE process).
+  This prevents the RuntimeErrors that were being caught and ignored.
+
+- Issue #24455: Prevent IDLE from hanging when a) closing the shell while the
+  debugger is active (15347); b) closing the debugger with the [X] button
+  (15348); and c) activating the debugger when already active (24455).
+  The patch by Mark Roseman does this by making two changes.
+  1. Suspend and resume the gui.interaction method with the tcl vwait
+  mechanism intended for this purpose (instead of root.mainloop & .quit).
+  2. In gui.run, allow any existing interaction to terminate first.
+
+- Change 'The program' to 'Your program' in an IDLE 'kill program?' message
+  to make it clearer that the program referred to is the currently running
+  user program, not IDLE itself.
+
+- Issue #24750: Improve the appearance of the IDLE editor window status bar.
+  Patch by Mark Roseman.
+
+- Issue #25313: Change the handling of new built-in text color themes to better
+  address the compatibility problem introduced by the addition of IDLE Dark.
+  Consistently use the revised idleConf.CurrentTheme everywhere in idlelib.
+
+- Issue #24782: Extension configuration is now a tab in the IDLE Preferences
+  dialog rather than a separate dialog.   The former tabs are now a sorted
+  list.  Patch by Mark Roseman.
+
+- Issue #22726: Re-activate the config dialog help button with some content
+  about the other buttons and the new IDLE Dark theme.
+
+- Issue #24820: IDLE now has an 'IDLE Dark' built-in text color theme.
+  It is more or less IDLE Classic inverted, with a cobalt blue background.
+  Strings, comments, keywords, ... are still green, red, orange, ... .
+  To use it with IDLEs released before November 2015, hit the
+  'Save as New Custom Theme' button and enter a new name,
+  such as 'Custom Dark'.  The custom theme will work with any IDLE
+  release, and can be modified.
+
+- Issue #25224: README.txt is now an idlelib index for IDLE developers and
+  curious users.  The previous user content is now in the IDLE doc chapter.
+  'IDLE' now means 'Integrated Development and Learning Environment'.
+
+- Issue #24820: Users can now set breakpoint colors in
+  Settings -> Custom Highlighting.  Original patch by Mark Roseman.
+
+- Issue #24972: Inactive selection background now matches active selection
+  background, as configured by users, on all systems.  Found items are now
+  always highlighted on Windows.  Initial patch by Mark Roseman.
+
+- Issue #24570: Idle: make calltip and completion boxes appear on Macs
+  affected by a tk regression.  Initial patch by Mark Roseman.
+
+- Issue #24988: Idle ScrolledList context menus (used in debugger)
+  now work on Mac Aqua.  Patch by Mark Roseman.
+
+- Issue #24801: Make right-click for context menu work on Mac Aqua.
+  Patch by Mark Roseman.
+
+- Issue #25173: Associate tkinter messageboxes with a specific widget.
+  For Mac OSX, make them a 'sheet'.  Patch by Mark Roseman.
+
+- Issue #25198: Enhance the initial html viewer now used for Idle Help.
+  * Properly indent fixed-pitch text (patch by Mark Roseman).
+  * Give code snippet a very Sphinx-like light blueish-gray background.
+  * Re-use initial width and height set by users for shell and editor.
+  * When the Table of Contents (TOC) menu is used, put the section header
+  at the top of the screen.
+
+- Issue #25225: Condense and rewrite Idle doc section on text colors.
+
+- Issue #21995: Explain some differences between IDLE and console Python.
+
+- Issue #22820: Explain need for *print* when running file from Idle editor.
+
+- Issue #25224: Doc: augment Idle feature list and no-subprocess section.
+
+- Issue #25219: Update doc for Idle command line options.
+  Some were missing and notes were not correct.
+
+- Issue #24861: Most of idlelib is private and subject to change.
+  Use idleib.idle.* to start Idle. See idlelib.__init__.__doc__.
+
+- Issue #25199: Idle: add synchronization comments for future maintainers.
+
+- Issue #16893: Replace help.txt with help.html for Idle doc display.
+  The new idlelib/help.html is rstripped Doc/build/html/library/idle.html.
+  It looks better than help.txt and will better document Idle as released.
+  The tkinter html viewer that works for this file was written by Mark Roseman.
+  The now unused EditorWindow.HelpDialog class and helt.txt file are deprecated.
+
+- Issue #24199: Deprecate unused idlelib.idlever with possible removal in 3.6.
+
+- Issue #24790: Remove extraneous code (which also create 2 & 3 conflicts).
+
+
+What's New in IDLE 3.5.0?
+=========================
+*Release date: 2015-09-13*
+
+- Issue #23672: Allow Idle to edit and run files with astral chars in name.
+  Patch by Mohd Sanad Zaki Rizvi.
+
+- Issue 24745: Idle editor default font. Switch from Courier to
+  platform-sensitive TkFixedFont.  This should not affect current customized
+  font selections.  If there is a problem, edit $HOME/.idlerc/config-main.cfg
+  and remove 'fontxxx' entries from [Editor Window].  Patch by Mark Roseman.
+
+- Issue #21192: Idle editor. When a file is run, put its name in the restart bar.
+  Do not print false prompts. Original patch by Adnan Umer.
+
+- Issue #13884: Idle menus. Remove tearoff lines. Patch by Roger Serwy.
+
+- Issue #23184: remove unused names and imports in idlelib.
+  Initial patch by Al Sweigart.
+
+- Issue #20577: Configuration of the max line length for the FormatParagraph
+  extension has been moved from the General tab of the Idle preferences dialog
+  to the FormatParagraph tab of the Config Extensions dialog.
+  Patch by Tal Einat.
+
+- Issue #16893: Update Idle doc chapter to match current Idle and add new
+  information.
+
+- Issue #3068: Add Idle extension configuration dialog to Options menu.
+  Changes are written to HOME/.idlerc/config-extensions.cfg.
+  Original patch by Tal Einat.
+
+- Issue #16233: A module browser (File : Class Browser, Alt+C) requires an
+  editor window with a filename.  When Class Browser is requested otherwise,
+  from a shell, output window, or 'Untitled' editor, Idle no longer displays
+  an error box.  It now pops up an  Open Module box (Alt+M). If a valid name
+  is entered and a module is opened, a corresponding browser is also opened.
+
+- Issue #4832: Save As to type Python files automatically adds .py to the
+  name you enter (even if your system does not display it).  Some systems
+  automatically add .txt when type is Text files.
+
+- Issue #21986: Code objects are not normally pickled by the pickle module.
+  To match this, they are no longer pickled when running under Idle.
+
+- Issue #23180: Rename IDLE "Windows" menu item to "Window".
+  Patch by Al Sweigart.
+
+- Issue #17390: Adjust Editor window title; remove 'Python',
+  move version to end.
+
+- Issue #14105: Idle debugger breakpoints no longer disappear
+  when inserting or deleting lines.
+
+- Issue #17172: Turtledemo can now be run from Idle.
+  Currently, the entry is on the Help menu, but it may move to Run.
+  Patch by Ramchandra Apt and Lita Cho.
+
+- Issue #21765: Add support for non-ascii identifiers to HyperParser.
+
+- Issue #21940: Add unittest for WidgetRedirector. Initial patch by Saimadhav
+  Heblikar.
+
+- Issue #18592: Add unittest for SearchDialogBase. Patch by Phil Webster.
+
+- Issue #21694: Add unittest for ParenMatch. Patch by Saimadhav Heblikar.
+
+- Issue #21686: add unittest for HyperParser. Original patch by Saimadhav
+  Heblikar.
+
+- Issue #12387: Add missing upper(lower)case versions of default Windows key
+  bindings for Idle so Caps Lock does not disable them. Patch by Roger Serwy.
+
+- Issue #21695: Closing a Find-in-files output window while the search is
+  still in progress no longer closes Idle.
+
+- Issue #18910: Add unittest for textView. Patch by Phil Webster.
+
+- Issue #18292: Add unittest for AutoExpand. Patch by Saihadhav Heblikar.
+
+- Issue #18409: Add unittest for AutoComplete. Patch by Phil Webster.
+
+- Issue #21477: htest.py - Improve framework, complete set of tests.
+  Patches by Saimadhav Heblikar
+
+- Issue #18104: Add idlelib/idle_test/htest.py with a few sample tests to begin
+  consolidating and improving human-validated tests of Idle. Change other files
+  as needed to work with htest.  Running the module as __main__ runs all tests.
+
+- Issue #21139: Change default paragraph width to 72, the PEP 8 recommendation.
+
+- Issue #21284: Paragraph reformat test passes after user changes reformat width.
+
+- Issue #17654: Ensure IDLE menus are customized properly on OS X for
+  non-framework builds and for all variants of Tk.
+
+
+What's New in IDLE 3.4.0?
+=========================
+*Release date: 2014-03-16*
+
+- Issue #17390: Display Python version on Idle title bar.
+  Initial patch by Edmond Burnett.
+
+- Issue #5066: Update IDLE docs. Patch by Todd Rovito.
+
+- Issue #17625: Close the replace dialog after it is used.
+
+- Issue #16226: Fix IDLE Path Browser crash.
+  (Patch by Roger Serwy)
+
+- Issue #15853: Prevent IDLE crash on OS X when opening Preferences menu
+  with certain versions of Tk 8.5.  Initial patch by Kevin Walzer.
+
+
+What's New in IDLE 3.3.0?
+=========================
+*Release date: 2012-09-29*
+
+- Issue #17625: Close the replace dialog after it is used.
+
+- Issue #7163: Propagate return value of sys.stdout.write.
+
+- Issue #15318: Prevent writing to sys.stdin.
+
+- Issue #4832: Modify IDLE to save files with .py extension by
+  default on Windows and OS X (Tk 8.5) as it already does with X11 Tk.
+
+- Issue #13532, #15319: Check that arguments to sys.stdout.write are strings.
+
+- Issue # 12510: Attempt to get certain tool tips no longer crashes IDLE.
+  Erroneous tool tips have been corrected. Default added for callables.
+
+- Issue #10365: File open dialog now works instead of crashing even when
+  parent window is closed while dialog is open.
+
+- Issue 14876: use user-selected font for highlight configuration.
+
+- Issue #14937: Perform auto-completion of filenames in strings even for
+  non-ASCII filenames. Likewise for identifiers.
+
+- Issue #8515: Set __file__ when run file in IDLE.
+  Initial patch by Bruce Frederiksen.
+
+- IDLE can be launched as `python -m idlelib`
+
+- Issue #14409: IDLE now properly executes commands in the Shell window
+  when it cannot read the normal config files on startup and
+  has to use the built-in default key bindings.
+  There was previously a bug in one of the defaults.
+
+- Issue #3573: IDLE hangs when passing invalid command line args
+  (directory(ies) instead of file(s)).
+
+- Issue #14018: Update checks for unstable system Tcl/Tk versions on OS X
+  to include versions shipped with OS X 10.7 and 10.8 in addition to 10.6.
+
+
+What's New in IDLE 3.2.1?
+=========================
+*Release date: 15-May-11*
+
+- Issue #6378: Further adjust idle.bat to start associated Python
+
+- Issue #11896: Save on Close failed despite selecting "Yes" in dialog.
+
+- Issue #1028: Ctrl-space binding to show completions was causing IDLE to exit.
+  Tk < 8.5 was sending invalid Unicode null; replaced with valid null.
+
+- Issue #4676: <Home> toggle failing on Tk 8.5, causing IDLE exits and strange selection
+  behavior. Improve selection extension behaviour.
+
+- Issue #3851: <Home> toggle non-functional when NumLock set on Windows.
+
+
+What's New in IDLE 3.1b1?
+=========================
+*Release date: 06-May-09*
+
+- Issue #5707: Use of 'filter' in keybindingDialog.py was causing custom key assignment to
+  fail.  Patch by Amaury Forgeot d'Arc.
+
+- Issue #4815: Offer conversion to UTF-8 if source files have
+  no encoding declaration and are not encoded in UTF-8.
+
+- Issue #4008: Fix problems with non-ASCII source files.
+
+- Issue #4323: Always encode source as UTF-8 without asking
+  the user (unless a different encoding is declared); remove
+  user configuration of source encoding; all according to
+  PEP 3120.
+
+- Issue #2665: On Windows, an IDLE installation upgraded from an old version
+  would not start if a custom theme was defined.
+
+------------------------------------------------------------------------
+Refer to NEWS2x.txt and HISTORY.txt for information on earlier releases.
+------------------------------------------------------------------------
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/README.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/README.txt
new file mode 100644
index 0000000000000000000000000000000000000000..76aec58912f00e543d0a623719bc42589478b97a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/README.txt
@@ -0,0 +1,290 @@
+README.txt: an index to idlelib files and the IDLE menu.
+
+IDLE is Python's Integrated Development and Learning
+Environment.  The user documentation is part of the Library Reference and
+is available in IDLE by selecting Help => IDLE Help.  This README documents
+idlelib for IDLE developers and curious users.
+
+IDLELIB FILES lists files alphabetically by category,
+with a short description of each.
+
+IDLE MENU show the menu tree, annotated with the module
+or module object that implements the corresponding function.
+
+This file is descriptive, not prescriptive, and may have errors
+and omissions and lag behind changes in idlelib.
+
+
+IDLELIB FILES
+=============
+
+Implementation files not in IDLE MENU are marked (nim).
+
+Startup
+-------
+__init__.py  # import, does nothing
+__main__.py  # -m, starts IDLE
+idle.bat
+idle.py
+idle.pyw
+
+Implementation
+--------------
+autocomplete.py   # Complete attribute names or filenames.
+autocomplete_w.py # Display completions.
+autoexpand.py     # Expand word with previous word in file.
+browser.py        # Create module browser window.
+calltip.py        # Create calltip text.
+calltip_w.py      # Display calltip.
+codecontext.py    # Show compound statement headers otherwise not visible.
+colorizer.py      # Colorize text (nim).
+config.py         # Load, fetch, and save configuration (nim).
+configdialog.py   # Display user configuration dialogs.
+config_key.py     # Change keybindings.
+debugger.py       # Debug code run from shell or editor; show window.
+debugger_r.py     # Debug code run in remote process.
+debugobj.py       # Define class used in stackviewer.
+debugobj_r.py     # Communicate objects between processes with rpc (nim).
+delegator.py      # Define base class for delegators (nim).
+dynoption.py      # Define mutable OptionMenu widget (nim)
+editor.py         # Define most of editor and utility functions.
+filelist.py       # Open files and manage list of open windows (nim).
+format.py         # Define format menu options.
+grep.py           # Find all occurrences of pattern in multiple files.
+help.py           # Display IDLE's html doc.
+help_about.py     # Display About IDLE dialog.
+history.py        # Get previous or next user input in shell (nim)
+hyperparser.py    # Parse code around a given index.
+iomenu.py         # Open, read, and write files
+macosx.py         # Help IDLE run on Macs (nim).
+mainmenu.py       # Define most of IDLE menu.
+multicall.py      # Wrap tk widget to allow multiple calls per event (nim).
+outwin.py         # Create window for grep output.
+parenmatch.py     # Match fenceposts: (), [], and {}.
+pathbrowser.py    # Create path browser window.
+percolator.py     # Manage delegator stack (nim).
+pyparse.py        # Give information on code indentation
+pyshell.py        # Start IDLE, manage shell, complete editor window
+query.py          # Query user for information
+redirector.py     # Intercept widget subcommands (for percolator) (nim).
+replace.py        # Search and replace pattern in text.
+rpc.py            # Communicate between idle and user processes (nim).
+run.py            # Manage user code execution subprocess.
+runscript.py      # Check and run user code.
+scrolledlist.py   # Define scrolledlist widget for IDLE (nim).
+search.py         # Search for pattern in text.
+searchbase.py     # Define base for search, replace, and grep dialogs.
+searchengine.py   # Define engine for all 3 search dialogs.
+sidebar.py        # Define line number and shell prompt sidebars.
+squeezer.py       # Squeeze long shell output (nim).
+stackviewer.py    # View stack after exception.
+statusbar.py      # Define status bar for windows (nim).
+tabbedpages.py    # Define tabbed pages widget (nim).
+textview.py       # Define read-only text widget (nim).
+tooltip.py        # Define popups for calltips, squeezer (nim).
+tree.py           # Define tree widget, used in browsers (nim).
+undo.py           # Manage undo stack.
+util.py           # Define common objects imported elsewhere (nim).
+windows.py        # Manage window list and define listed top level.
+zoomheight.py     # Zoom window to full height of screen.
+zzdummy.py        # Example extension.
+
+Configuration
+-------------
+config-extensions.def # Defaults for extensions
+config-highlight.def  # Defaults for colorizing
+config-keys.def       # Defaults for key bindings
+config-main.def       # Defaults for font and general tabs
+
+Text
+----
+CREDITS.txt  # not maintained, displayed by About IDLE
+HISTORY.txt  # NEWS up to July 2001
+NEWS.txt     # commits, displayed by About IDLE
+NEWS2.txt    # commits to Python2
+README.txt   # this file, displayed by About IDLE
+TODO.txt     # needs review
+extend.txt   # about writing extensions
+help.html    # copy of idle.html in docs, displayed by IDLE Help
+
+Subdirectories
+--------------
+Icons        # small image files
+idle_test    # files for human test and automated unit tests
+
+
+IDLE MENUS
+==========
+
+Top level items and most submenu items are defined in mainmenu.
+Extensions add submenu items when active.  The names given are
+found, quoted, in one of these modules, paired with a '<<pseudoevent>>'.
+Each pseudoevent is bound to an event handler.  Some event handlers
+call another function that does the actual work.  The annotations below
+are intended to at least give the module where the actual work is done.
+'eEW' = editor.EditorWindow
+
+File
+  New File         # eEW.new_callback
+  Open...          # iomenu.open
+  Open Module      # eEw.open_module
+  Recent Files
+  Class Browser    # eEW.open_class_browser, browser.ClassBrowser
+  Path Browser     # eEW.open_path_browser, pathbrowser
+  ---
+  Save             # iomenu.save
+  Save As...       # iomenu.save_as
+  Save Copy As...  # iomenu.save_a_copy
+  ---
+  Print Window     # iomenu.print_window
+  ---
+  Close            # eEW.close_event
+  Exit             # flist.close_all_callback (bound in eEW)
+
+Edit
+  Undo             # undodelegator
+  Redo             # undodelegator
+  ---              # eEW.right_menu_event
+  Cut              # eEW.cut
+  Copy             # eEW.copy
+  Paste            # eEW.past
+  Select All       # eEW.select_all (+ see eEW.remove_selection)
+  ---              # Next 5 items use searchengine; dialogs use searchbase
+  Find             # eEW.find_event, search.SearchDialog.find
+  Find Again       # eEW.find_again_event, sSD.find_again
+  Find Selection   # eEW.find_selection_event, sSD.find_selection
+  Find in Files... # eEW.find_in_files_event, grep
+  Replace...       # eEW.replace_event, replace.ReplaceDialog.replace
+  Go to Line       # eEW.goto_line_event
+  Show Completions # autocomplete extension and autocompleteWidow (&HP)
+  Expand Word      # autoexpand extension
+  Show call tip    # Calltips extension and CalltipWindow (& Hyperparser)
+  Show surrounding parens  # parenmatch (& Hyperparser)
+
+Format (Editor only) [fFR = format.FormatRegion]
+  Format Paragraph # format.FormatParagraph.format_paragraph_event
+  Indent Region    # fFR.indent_region_event
+  Dedent Region    # fFR.dedent_region_event
+  Comment Out Reg. # fFR.comment_region_event
+  Uncomment Region # fFR.uncomment_region_event
+  Tabify Region    # fFR.tabify_region_event
+  Untabify Region  # fFR.untabify_region_event
+  Toggle Tabs      # format.Indents.toggle_tabs_event
+  New Indent Width # format.Indents.change_indentwidth_event
+  Strip tailing whitespace  # format.rstrip
+  Zin              # zzdummy
+  Zout             # zzdummy
+
+Run (Editor only)
+  Run Module         # runscript.ScriptBinding.run_module_event
+  Run... Customized  # runscript.ScriptBinding.run_custom_event
+  Check Module       # runscript.ScriptBinding.check_module_event
+  Python Shell       # pyshell.Pyshell, pyshell.ModifiedInterpreter
+
+Shell  # pyshell
+  View Last Restart    # pyshell.PyShell.view_restart_mark
+  Restart Shell        # pyshell.PyShell.restart_shell
+  Previous History     # history.History.history_prev
+  Next History         # history.History.history_next
+  Interrupt Execution  # pyshell.PyShell.cancel_callback
+
+Debug (Shell only)
+  Go to File/Line  # outwin.OutputWindow.goto_file_line
+  debugger         # debugger, debugger_r, PyShell.toggle_debugger
+  Stack Viewer     # stackviewer, PyShell.open_stack_viewer
+  Auto-open Stack Viewer  # stackviewer
+
+Options
+  Configure IDLE   # eEW.config_dialog, config, configdialog (cd)
+    (Parts of the dialog)
+    Buttons        # cd.ConfigDialog
+    Font tab       # cd.FontPage, config-main.def
+    Highlight tab  # cd.HighPage, query, config-highlight.def
+    Keys tab       # cd.KeysPage, query, config_key, config_keys.def
+    Windows tab    # cd.WinPage, config_main.def
+    Shell/Ed tab   # cd.ShedPage, config-main.def
+    Extensions tab # config-extensions.def, corresponding .py files
+  ---
+  ... Code Context # codecontext
+  ... Line Numbers # sidebar
+  Zoomheight       # zoomheight
+
+Window
+  <open windows>   # windows
+
+Help
+  About IDLE       # eEW.about_dialog, help_about.AboutDialog
+  ---
+  IDLE Help        # eEW.help_dialog, help.show_idlehelp
+  Python Docs      # eEW.python_docs
+  Turtle Demo      # eEW.open_turtle_demo
+  ---
+  <other help sources>
+
+<Context Menu> (right click)
+  Defined in editor, PyShell.pyshell
+    Cut
+    Copy
+    Paste
+    ---
+    Go to file/line (shell and output only)
+    Set Breakpoint (editor only)
+    Clear Breakpoint (editor only)
+  Defined in debugger
+    Go to source line
+    Show stack frame
+
+<No menu>
+Center Insert      # eEW.center_insert_event
+
+
+OTHER TOPICS
+============
+
+Generally use PEP 8.
+
+import statements
+-----------------
+Put imports at the top, unless there is a good reason otherwise.
+PEP 8 says to group stdlib, 3rd-party dependencies, and package imports.
+For idlelib, the groups are general stdlib, tkinter, and idlelib.
+Sort modules within each group, except that tkinter.ttk follows tkinter.
+Sort 'from idlelib import mod1' and 'from idlelib.mod2 import object'
+together by module, ignoring within module objects.
+Put 'import __main__' after other idlelib imports.
+
+Imports only needed for testing are put not at the top but in an
+htest function def or "if __name__ == '__main__'" clause.
+
+Within module imports like "from idlelib.mod import class" may cause
+circular imports to deadlock.  Even without this, circular imports may
+require at least one of the imports to be delayed until a function call.
+
+What's New entries
+------------------
+
+Repository directory Doc/whatsnew/ has a file 3.n.rst for each 3.n
+Python version.  For the first entry in each file, add subsection
+'IDLE and idlelib', in alphabetical position, to the 'Improved Modules'
+section.  For the rest of cpython, entries to 3.(n+1).rst begin with
+the release of 3.n.0b1.  For IDLE, entries for features backported from
+'main' to '3.n' during its beta period do not got in 3.(n+1).rst.  The
+latter usually gets its first entry during the 3.n.0 candidate period
+or after the 3.n.0 release.
+
+When, as per PEP 434, feature changes are backported, entries are placed
+in the 3.n.rst file *in the main branch* for each Python version n that
+gets the backport. (Note: the format of entries have varied between
+versions.)  Add a line "New in 3.n maintenance releases." before the
+first back-ported feature after 3.n.0 is released. Since each older
+version file gets a different number of backports, it is easiest to
+make a separate PR for each file and label it with the backports
+needed.
+
+Github repository and issues
+----------------------------
+
+The CPython repository is https://github.com/python/cpython.  The
+IDLE Issues listing is https://github.com/orgs/python/projects/31.
+The main classification is by Topic, based on the IDLE menu.  View the
+topics list by clicking the [<]] button in the upper right.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/TODO.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/TODO.txt
new file mode 100644
index 0000000000000000000000000000000000000000..41b86b0c6d5bbd6a92166e3732b4bba1044425d3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/TODO.txt
@@ -0,0 +1,210 @@
+Original IDLE todo, much of it now outdated:
+============================================
+TO DO:
+
+- improve debugger:
+    - manage breakpoints globally, allow bp deletion, tbreak, cbreak etc.
+    - real object browser
+    - help on how to use it (a simple help button will do wonders)
+    - performance?  (updates of large sets of locals are slow)
+    - better integration of "debug module"
+    - debugger should be global resource (attached to flist, not to shell)
+    - fix the stupid bug where you need to step twice
+    - display class name in stack viewer entries for methods
+    - suppress tracing through IDLE internals (e.g. print) DONE
+    - add a button to suppress through a specific module or class or method
+    - more object inspection to stack viewer, e.g. to view all array items
+- insert the initial current directory into sys.path DONE
+- default directory attribute for each window instead of only for windows
+  that have an associated filename
+- command expansion from keywords, module contents, other buffers, etc.
+- "Recent documents" menu item DONE
+- Filter region command
+- Optional horizontal scroll bar
+- more Emacsisms:
+    - ^K should cut to buffer
+    - M-[, M-] to move by paragraphs
+    - incremental search?
+- search should indicate wrap-around in some way
+- restructure state sensitive code to avoid testing flags all the time
+- persistent user state (e.g. window and cursor positions, bindings)
+- make backups when saving
+- check file mtimes at various points
+- Pluggable interface with RCS/CVS/Perforce/Clearcase
+- better help?
+- don't open second class browser on same module (nor second path browser)
+- unify class and path browsers
+- Need to define a standard way whereby one can determine one is running
+  inside IDLE (needed for Tk mainloop, also handy for $PYTHONSTARTUP)
+- Add more utility methods for use by extensions (a la get_selection)
+- Way to run command in totally separate interpreter (fork+os.system?) DONE
+- Way to find definition of fully-qualified name:
+  In other words, select "UserDict.UserDict", hit some magic key and
+  it loads up UserDict.py and finds the first def or class for UserDict.
+- need a way to force colorization on/off
+- need a way to force auto-indent on/off
+
+Details:
+
+- ^O (on Unix -- open-line) should honor autoindent
+- after paste, show end of pasted text
+- on Windows, should turn short filename to long filename (not only in argv!)
+  (shouldn't this be done -- or undone -- by ntpath.normpath?)
+- new autoindent after colon even indents when the colon is in a comment!
+- sometimes forward slashes in pathname remain
+- sometimes star in window name remains in Windows menu
+- With unix bindings, ESC by itself is ignored
+- Sometimes for no apparent reason a selection from the cursor to the
+  end of the command buffer appears, which is hard to get rid of
+  because it stays when you are typing!
+- The Line/Col in the status bar can be wrong initially in PyShell DONE
+
+Structural problems:
+
+- too much knowledge in FileList about EditorWindow (for example)
+- should add some primitives for accessing the selection etc.
+  to repeat cumbersome code over and over
+
+======================================================================
+
+Jeff Bauer suggests:
+
+- Open Module doesn't appear to handle hierarchical packages.
+- Class browser should also allow hierarchical packages.
+- Open and Open Module could benefit from a history, DONE
+  either command line style, or Microsoft recent-file
+  style.
+- Add a Smalltalk-style inspector  (i.e. Tkinspect)
+
+The last suggestion is already a reality, but not yet
+integrated into IDLE.  I use a module called inspector.py,
+that used to be available from python.org(?)  It no longer
+appears to be in the contributed section, and the source
+has no author attribution.
+
+In any case, the code is useful for visually navigating
+an object's attributes, including its container hierarchy.
+
+    >>> from inspector import Tkinspect
+    >>> Tkinspect(None, myObject)
+
+Tkinspect could probably be extended and refined to
+integrate better into IDLE.
+
+======================================================================
+
+Comparison to PTUI
+------------------
+
++ PTUI's help is better (HTML!)
+
++ PTUI can attach a shell to any module
+
++ PTUI has some more I/O commands:
+  open multiple
+  append
+  examine (what's that?)
+
+======================================================================
+
+Notes after trying to run Grail
+-------------------------------
+
+- Grail does stuff to sys.path based on sys.argv[0]; you must set
+sys.argv[0] to something decent first (it is normally set to the path of
+the idle script).
+
+- Grail must be exec'ed in __main__ because that's imported by some
+other parts of Grail.
+
+- Grail uses a module called History and so does idle :-(
+
+======================================================================
+
+Robin Friedrich's items:
+
+Things I'd like to see:
+    - I'd like support for shift-click extending the selection. There's a
+      bug now that it doesn't work the first time you try it.
+    - Printing is needed. How hard can that be on Windows? FIRST CUT DONE
+    - The python-mode trick of autoindenting a line with <tab> is neat and
+      very handy.
+    - (someday) a spellchecker for docstrings and comments.
+    - a pagedown/up command key which moves to next class/def statement (top
+      level)
+    - split window capability
+    - DnD text relocation/copying
+
+Things I don't want to see.
+    - line numbers...  will probably slow things down way too much.
+    - Please use another icon for the tree browser leaf. The small snake
+      isn't cutting it.
+
+----------------------------------------------------------------------
+
+- Customizable views (multi-window or multi-pane).  (Markus Gritsch)
+
+- Being able to double click (maybe double right click) on a callable
+object in the editor which shows the source of the object, if
+possible.  (Gerrit Holl)
+
+- Hooks into the guts, like in Emacs.  (Mike Romberg)
+
+- Sharing the editor with a remote tutor.  (Martijn Faassen)
+
+- Multiple views on the same file.  (Tony J Ibbs)
+
+- Store breakpoints in a global (per-project) database (GvR); Dirk
+Heise adds: save some space-trimmed context and search around when
+reopening a file that might have been edited by someone else.
+
+- Capture menu events in extensions without changing the IDLE source.
+(Matthias Barmeier)
+
+- Use overlapping panels (a "notebook" in MFC terms I think) for info
+that doesn't need to be accessible simultaneously (e.g. HTML source
+and output).  Use multi-pane windows for info that does need to be
+shown together (e.g. class browser and source).  (Albert Brandl)
+
+- A project should invisibly track all symbols, for instant search,
+replace and cross-ref.  Projects should be allowed to span multiple
+directories, hosts, etc.  Project management files are placed in a
+directory you specify.  A global mapping between project names and
+project directories should exist [not so sure --GvR].  (Tim Peters)
+
+- Merge attr-tips and auto-expand.  (Mark Hammond, Tim Peters)
+
+- Python Shell should behave more like a "shell window" as users know
+it -- i.e. you can only edit the current command, and the cursor can't
+escape from the command area.  (Albert Brandl)
+
+- Set X11 class to "idle/Idle", set icon and title to something
+beginning with "idle" -- for window managers.  (Randall Hopper)
+
+- Config files editable through a preferences dialog.  (me) DONE
+
+- Config files still editable outside the preferences dialog.
+(Randall Hopper) DONE
+
+- When you're editing a command in PyShell, and there are only blank
+lines below the cursor, hitting Return should ignore or delete those
+blank lines rather than deciding you're not on the last line.  (me)
+
+- Run command (F5 c.s.) should be more like Pythonwin's Run -- a
+dialog with options to give command line arguments, run the debugger,
+etc.  (me)
+
+- Shouldn't be able to delete part of the prompt (or any text before
+it) in the PyShell.  (Martijn Faassen)   DONE
+
+- Emacs style auto-fill (also smart about comments and strings).
+(Jeremy Hylton)
+
+- Output of Run Script should go to a separate output window, not to
+the shell window.  Output of separate runs should all go to the same
+window but clearly delimited.  (David Scherer) REJECT FIRST, LATTER DONE
+
+- GUI form designer to kick VB's butt.  (Robert Geiger) THAT'S NOT IDLE
+
+- Printing!  Possibly via generation of PDF files which the user must
+then send to the printer separately.  (Dinu Gherman)  FIRST CUT
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..791ddeab79734013183e87da7b878f904b795e42
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__init__.py
@@ -0,0 +1,10 @@
+"""The idlelib package implements the Idle application.
+
+Idle includes an interactive shell and editor.
+Starting with Python 3.6, IDLE requires tcl/tk 8.5 or later.
+Use the files named idle.* to start Idle.
+
+The other files are private implementations.  Their details are subject to
+change.  See PEP 434 for more.  Import them at your own risk.
+"""
+testing = False  # Set True by test.test_idle.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..ec3915b265f665eaa7b8ae27eb8b2cbdac767693
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/__main__.py
@@ -0,0 +1,7 @@
+"""
+IDLE main entry point
+
+Run IDLE as python -m idlelib
+"""
+import idlelib.pyshell
+idlelib.pyshell.main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete.py
new file mode 100644
index 0000000000000000000000000000000000000000..032d31225315fb71a8efcbbc11b344f83ba1ea7c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete.py
@@ -0,0 +1,228 @@
+"""Complete either attribute names or file names.
+
+Either on demand or after a user-selected delay after a key character,
+pop up a list of candidates.
+"""
+import __main__
+import keyword
+import os
+import string
+import sys
+
+# Modified keyword list is used in fetch_completions.
+completion_kwds = [s for s in keyword.kwlist
+                     if s not in {'True', 'False', 'None'}]  # In builtins.
+completion_kwds.extend(('match', 'case'))  # Context keywords.
+completion_kwds.sort()
+
+# Two types of completions; defined here for autocomplete_w import below.
+ATTRS, FILES = 0, 1
+from idlelib import autocomplete_w
+from idlelib.config import idleConf
+from idlelib.hyperparser import HyperParser
+
+# Tuples passed to open_completions.
+#       EvalFunc, Complete, WantWin, Mode
+FORCE = True,     False,    True,    None   # Control-Space.
+TAB   = False,    True,     True,    None   # Tab.
+TRY_A = False,    False,    False,   ATTRS  # '.' for attributes.
+TRY_F = False,    False,    False,   FILES  # '/' in quotes for file name.
+
+# This string includes all chars that may be in an identifier.
+# TODO Update this here and elsewhere.
+ID_CHARS = string.ascii_letters + string.digits + "_"
+
+SEPS = f"{os.sep}{os.altsep if os.altsep else ''}"
+TRIGGERS = f".{SEPS}"
+
+class AutoComplete:
+
+    def __init__(self, editwin=None, tags=None):
+        self.editwin = editwin
+        if editwin is not None:   # not in subprocess or no-gui test
+            self.text = editwin.text
+        self.tags = tags
+        self.autocompletewindow = None
+        # id of delayed call, and the index of the text insert when
+        # the delayed call was issued. If _delayed_completion_id is
+        # None, there is no delayed call.
+        self._delayed_completion_id = None
+        self._delayed_completion_index = None
+
+    @classmethod
+    def reload(cls):
+        cls.popupwait = idleConf.GetOption(
+            "extensions", "AutoComplete", "popupwait", type="int", default=0)
+
+    def _make_autocomplete_window(self):  # Makes mocking easier.
+        return autocomplete_w.AutoCompleteWindow(self.text, tags=self.tags)
+
+    def _remove_autocomplete_window(self, event=None):
+        if self.autocompletewindow:
+            self.autocompletewindow.hide_window()
+            self.autocompletewindow = None
+
+    def force_open_completions_event(self, event):
+        "(^space) Open completion list, even if a function call is needed."
+        self.open_completions(FORCE)
+        return "break"
+
+    def autocomplete_event(self, event):
+        "(tab) Complete word or open list if multiple options."
+        if hasattr(event, "mc_state") and event.mc_state or\
+                not self.text.get("insert linestart", "insert").strip():
+            # A modifier was pressed along with the tab or
+            # there is only previous whitespace on this line, so tab.
+            return None
+        if self.autocompletewindow and self.autocompletewindow.is_active():
+            self.autocompletewindow.complete()
+            return "break"
+        else:
+            opened = self.open_completions(TAB)
+            return "break" if opened else None
+
+    def try_open_completions_event(self, event=None):
+        "(./) Open completion list after pause with no movement."
+        lastchar = self.text.get("insert-1c")
+        if lastchar in TRIGGERS:
+            args = TRY_A if lastchar == "." else TRY_F
+            self._delayed_completion_index = self.text.index("insert")
+            if self._delayed_completion_id is not None:
+                self.text.after_cancel(self._delayed_completion_id)
+            self._delayed_completion_id = self.text.after(
+                self.popupwait, self._delayed_open_completions, args)
+
+    def _delayed_open_completions(self, args):
+        "Call open_completions if index unchanged."
+        self._delayed_completion_id = None
+        if self.text.index("insert") == self._delayed_completion_index:
+            self.open_completions(args)
+
+    def open_completions(self, args):
+        """Find the completions and create the AutoCompleteWindow.
+        Return True if successful (no syntax error or so found).
+        If complete is True, then if there's nothing to complete and no
+        start of completion, won't open completions and return False.
+        If mode is given, will open a completion list only in this mode.
+        """
+        evalfuncs, complete, wantwin, mode = args
+        # Cancel another delayed call, if it exists.
+        if self._delayed_completion_id is not None:
+            self.text.after_cancel(self._delayed_completion_id)
+            self._delayed_completion_id = None
+
+        hp = HyperParser(self.editwin, "insert")
+        curline = self.text.get("insert linestart", "insert")
+        i = j = len(curline)
+        if hp.is_in_string() and (not mode or mode==FILES):
+            # Find the beginning of the string.
+            # fetch_completions will look at the file system to determine
+            # whether the string value constitutes an actual file name
+            # XXX could consider raw strings here and unescape the string
+            # value if it's not raw.
+            self._remove_autocomplete_window()
+            mode = FILES
+            # Find last separator or string start
+            while i and curline[i-1] not in "'\"" + SEPS:
+                i -= 1
+            comp_start = curline[i:j]
+            j = i
+            # Find string start
+            while i and curline[i-1] not in "'\"":
+                i -= 1
+            comp_what = curline[i:j]
+        elif hp.is_in_code() and (not mode or mode==ATTRS):
+            self._remove_autocomplete_window()
+            mode = ATTRS
+            while i and (curline[i-1] in ID_CHARS or ord(curline[i-1]) > 127):
+                i -= 1
+            comp_start = curline[i:j]
+            if i and curline[i-1] == '.':  # Need object with attributes.
+                hp.set_index("insert-%dc" % (len(curline)-(i-1)))
+                comp_what = hp.get_expression()
+                if (not comp_what or
+                   (not evalfuncs and comp_what.find('(') != -1)):
+                    return None
+            else:
+                comp_what = ""
+        else:
+            return None
+
+        if complete and not comp_what and not comp_start:
+            return None
+        comp_lists = self.fetch_completions(comp_what, mode)
+        if not comp_lists[0]:
+            return None
+        self.autocompletewindow = self._make_autocomplete_window()
+        return not self.autocompletewindow.show_window(
+                comp_lists, "insert-%dc" % len(comp_start),
+                complete, mode, wantwin)
+
+    def fetch_completions(self, what, mode):
+        """Return a pair of lists of completions for something. The first list
+        is a sublist of the second. Both are sorted.
+
+        If there is a Python subprocess, get the comp. list there.  Otherwise,
+        either fetch_completions() is running in the subprocess itself or it
+        was called in an IDLE EditorWindow before any script had been run.
+
+        The subprocess environment is that of the most recently run script.  If
+        two unrelated modules are being edited some calltips in the current
+        module may be inoperative if the module was not the last to run.
+        """
+        try:
+            rpcclt = self.editwin.flist.pyshell.interp.rpcclt
+        except:
+            rpcclt = None
+        if rpcclt:
+            return rpcclt.remotecall("exec", "get_the_completion_list",
+                                     (what, mode), {})
+        else:
+            if mode == ATTRS:
+                if what == "":  # Main module names.
+                    namespace = {**__main__.__builtins__.__dict__,
+                                 **__main__.__dict__}
+                    bigl = eval("dir()", namespace)
+                    bigl.extend(completion_kwds)
+                    bigl.sort()
+                    if "__all__" in bigl:
+                        smalll = sorted(eval("__all__", namespace))
+                    else:
+                        smalll = [s for s in bigl if s[:1] != '_']
+                else:
+                    try:
+                        entity = self.get_entity(what)
+                        bigl = dir(entity)
+                        bigl.sort()
+                        if "__all__" in bigl:
+                            smalll = sorted(entity.__all__)
+                        else:
+                            smalll = [s for s in bigl if s[:1] != '_']
+                    except:
+                        return [], []
+
+            elif mode == FILES:
+                if what == "":
+                    what = "."
+                try:
+                    expandedpath = os.path.expanduser(what)
+                    bigl = os.listdir(expandedpath)
+                    bigl.sort()
+                    smalll = [s for s in bigl if s[:1] != '.']
+                except OSError:
+                    return [], []
+
+            if not smalll:
+                smalll = bigl
+            return smalll, bigl
+
+    def get_entity(self, name):
+        "Lookup name in a namespace spanning sys.modules and __main.dict__."
+        return eval(name, {**sys.modules, **__main__.__dict__})
+
+
+AutoComplete.reload()
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_autocomplete', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete_w.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete_w.py
new file mode 100644
index 0000000000000000000000000000000000000000..24320b5a3bffab3986d50094f80b2967be497bfc
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autocomplete_w.py
@@ -0,0 +1,498 @@
+"""
+An auto-completion window for IDLE, used by the autocomplete extension
+"""
+import platform
+
+from tkinter import *
+from tkinter.ttk import Scrollbar
+
+from idlelib.autocomplete import FILES, ATTRS
+from idlelib.multicall import MC_SHIFT
+
+HIDE_VIRTUAL_EVENT_NAME = "<<autocompletewindow-hide>>"
+HIDE_FOCUS_OUT_SEQUENCE = "<FocusOut>"
+HIDE_SEQUENCES = (HIDE_FOCUS_OUT_SEQUENCE, "<ButtonPress>")
+KEYPRESS_VIRTUAL_EVENT_NAME = "<<autocompletewindow-keypress>>"
+# We need to bind event beyond <Key> so that the function will be called
+# before the default specific IDLE function
+KEYPRESS_SEQUENCES = ("<Key>", "<Key-BackSpace>", "<Key-Return>", "<Key-Tab>",
+                      "<Key-Up>", "<Key-Down>", "<Key-Home>", "<Key-End>",
+                      "<Key-Prior>", "<Key-Next>", "<Key-Escape>")
+KEYRELEASE_VIRTUAL_EVENT_NAME = "<<autocompletewindow-keyrelease>>"
+KEYRELEASE_SEQUENCE = "<KeyRelease>"
+LISTUPDATE_SEQUENCE = "<B1-ButtonRelease>"
+WINCONFIG_SEQUENCE = "<Configure>"
+DOUBLECLICK_SEQUENCE = "<B1-Double-ButtonRelease>"
+
+class AutoCompleteWindow:
+
+    def __init__(self, widget, tags):
+        # The widget (Text) on which we place the AutoCompleteWindow
+        self.widget = widget
+        # Tags to mark inserted text with
+        self.tags = tags
+        # The widgets we create
+        self.autocompletewindow = self.listbox = self.scrollbar = None
+        # The default foreground and background of a selection. Saved because
+        # they are changed to the regular colors of list items when the
+        # completion start is not a prefix of the selected completion
+        self.origselforeground = self.origselbackground = None
+        # The list of completions
+        self.completions = None
+        # A list with more completions, or None
+        self.morecompletions = None
+        # The completion mode, either autocomplete.ATTRS or .FILES.
+        self.mode = None
+        # The current completion start, on the text box (a string)
+        self.start = None
+        # The index of the start of the completion
+        self.startindex = None
+        # The last typed start, used so that when the selection changes,
+        # the new start will be as close as possible to the last typed one.
+        self.lasttypedstart = None
+        # Do we have an indication that the user wants the completion window
+        # (for example, he clicked the list)
+        self.userwantswindow = None
+        # event ids
+        self.hideid = self.keypressid = self.listupdateid = \
+            self.winconfigid = self.keyreleaseid = self.doubleclickid = None
+        # Flag set if last keypress was a tab
+        self.lastkey_was_tab = False
+        # Flag set to avoid recursive <Configure> callback invocations.
+        self.is_configuring = False
+
+    def _change_start(self, newstart):
+        min_len = min(len(self.start), len(newstart))
+        i = 0
+        while i < min_len and self.start[i] == newstart[i]:
+            i += 1
+        if i < len(self.start):
+            self.widget.delete("%s+%dc" % (self.startindex, i),
+                               "%s+%dc" % (self.startindex, len(self.start)))
+        if i < len(newstart):
+            self.widget.insert("%s+%dc" % (self.startindex, i),
+                               newstart[i:],
+                               self.tags)
+        self.start = newstart
+
+    def _binary_search(self, s):
+        """Find the first index in self.completions where completions[i] is
+        greater or equal to s, or the last index if there is no such.
+        """
+        i = 0; j = len(self.completions)
+        while j > i:
+            m = (i + j) // 2
+            if self.completions[m] >= s:
+                j = m
+            else:
+                i = m + 1
+        return min(i, len(self.completions)-1)
+
+    def _complete_string(self, s):
+        """Assuming that s is the prefix of a string in self.completions,
+        return the longest string which is a prefix of all the strings which
+        s is a prefix of them. If s is not a prefix of a string, return s.
+        """
+        first = self._binary_search(s)
+        if self.completions[first][:len(s)] != s:
+            # There is not even one completion which s is a prefix of.
+            return s
+        # Find the end of the range of completions where s is a prefix of.
+        i = first + 1
+        j = len(self.completions)
+        while j > i:
+            m = (i + j) // 2
+            if self.completions[m][:len(s)] != s:
+                j = m
+            else:
+                i = m + 1
+        last = i-1
+
+        if first == last: # only one possible completion
+            return self.completions[first]
+
+        # We should return the maximum prefix of first and last
+        first_comp = self.completions[first]
+        last_comp = self.completions[last]
+        min_len = min(len(first_comp), len(last_comp))
+        i = len(s)
+        while i < min_len and first_comp[i] == last_comp[i]:
+            i += 1
+        return first_comp[:i]
+
+    def _selection_changed(self):
+        """Call when the selection of the Listbox has changed.
+
+        Updates the Listbox display and calls _change_start.
+        """
+        cursel = int(self.listbox.curselection()[0])
+
+        self.listbox.see(cursel)
+
+        lts = self.lasttypedstart
+        selstart = self.completions[cursel]
+        if self._binary_search(lts) == cursel:
+            newstart = lts
+        else:
+            min_len = min(len(lts), len(selstart))
+            i = 0
+            while i < min_len and lts[i] == selstart[i]:
+                i += 1
+            newstart = selstart[:i]
+        self._change_start(newstart)
+
+        if self.completions[cursel][:len(self.start)] == self.start:
+            # start is a prefix of the selected completion
+            self.listbox.configure(selectbackground=self.origselbackground,
+                                   selectforeground=self.origselforeground)
+        else:
+            self.listbox.configure(selectbackground=self.listbox.cget("bg"),
+                                   selectforeground=self.listbox.cget("fg"))
+            # If there are more completions, show them, and call me again.
+            if self.morecompletions:
+                self.completions = self.morecompletions
+                self.morecompletions = None
+                self.listbox.delete(0, END)
+                for item in self.completions:
+                    self.listbox.insert(END, item)
+                self.listbox.select_set(self._binary_search(self.start))
+                self._selection_changed()
+
+    def show_window(self, comp_lists, index, complete, mode, userWantsWin):
+        """Show the autocomplete list, bind events.
+
+        If complete is True, complete the text, and if there is exactly
+        one matching completion, don't open a list.
+        """
+        # Handle the start we already have
+        self.completions, self.morecompletions = comp_lists
+        self.mode = mode
+        self.startindex = self.widget.index(index)
+        self.start = self.widget.get(self.startindex, "insert")
+        if complete:
+            completed = self._complete_string(self.start)
+            start = self.start
+            self._change_start(completed)
+            i = self._binary_search(completed)
+            if self.completions[i] == completed and \
+               (i == len(self.completions)-1 or
+                self.completions[i+1][:len(completed)] != completed):
+                # There is exactly one matching completion
+                return completed == start
+        self.userwantswindow = userWantsWin
+        self.lasttypedstart = self.start
+
+        self.autocompletewindow = acw = Toplevel(self.widget)
+        acw.withdraw()
+        acw.wm_overrideredirect(1)
+        try:
+            # Prevent grabbing focus on macOS.
+            acw.tk.call("::tk::unsupported::MacWindowStyle", "style", acw._w,
+                        "help", "noActivates")
+        except TclError:
+            pass
+        self.scrollbar = scrollbar = Scrollbar(acw, orient=VERTICAL)
+        self.listbox = listbox = Listbox(acw, yscrollcommand=scrollbar.set,
+                                         exportselection=False)
+        for item in self.completions:
+            listbox.insert(END, item)
+        self.origselforeground = listbox.cget("selectforeground")
+        self.origselbackground = listbox.cget("selectbackground")
+        scrollbar.config(command=listbox.yview)
+        scrollbar.pack(side=RIGHT, fill=Y)
+        listbox.pack(side=LEFT, fill=BOTH, expand=True)
+        #acw.update_idletasks() # Need for tk8.6.8 on macOS: #40128.
+        acw.lift()  # work around bug in Tk 8.5.18+ (issue #24570)
+
+        # Initialize the listbox selection
+        self.listbox.select_set(self._binary_search(self.start))
+        self._selection_changed()
+
+        # bind events
+        self.hideaid = acw.bind(HIDE_VIRTUAL_EVENT_NAME, self.hide_event)
+        self.hidewid = self.widget.bind(HIDE_VIRTUAL_EVENT_NAME, self.hide_event)
+        acw.event_add(HIDE_VIRTUAL_EVENT_NAME, HIDE_FOCUS_OUT_SEQUENCE)
+        for seq in HIDE_SEQUENCES:
+            self.widget.event_add(HIDE_VIRTUAL_EVENT_NAME, seq)
+
+        self.keypressid = self.widget.bind(KEYPRESS_VIRTUAL_EVENT_NAME,
+                                           self.keypress_event)
+        for seq in KEYPRESS_SEQUENCES:
+            self.widget.event_add(KEYPRESS_VIRTUAL_EVENT_NAME, seq)
+        self.keyreleaseid = self.widget.bind(KEYRELEASE_VIRTUAL_EVENT_NAME,
+                                             self.keyrelease_event)
+        self.widget.event_add(KEYRELEASE_VIRTUAL_EVENT_NAME,KEYRELEASE_SEQUENCE)
+        self.listupdateid = listbox.bind(LISTUPDATE_SEQUENCE,
+                                         self.listselect_event)
+        self.is_configuring = False
+        self.winconfigid = acw.bind(WINCONFIG_SEQUENCE, self.winconfig_event)
+        self.doubleclickid = listbox.bind(DOUBLECLICK_SEQUENCE,
+                                          self.doubleclick_event)
+        return None
+
+    def winconfig_event(self, event):
+        if self.is_configuring:
+            # Avoid running on recursive <Configure> callback invocations.
+            return
+
+        self.is_configuring = True
+        if not self.is_active():
+            return
+
+        # Since the <Configure> event may occur after the completion window is gone,
+        # catch potential TclError exceptions when accessing acw.  See: bpo-41611.
+        try:
+            # Position the completion list window
+            text = self.widget
+            text.see(self.startindex)
+            x, y, cx, cy = text.bbox(self.startindex)
+            acw = self.autocompletewindow
+            if platform.system().startswith('Windows'):
+                # On Windows an update() call is needed for the completion
+                # list window to be created, so that we can fetch its width
+                # and height.  However, this is not needed on other platforms
+                # (tested on Ubuntu and macOS) but at one point began
+                # causing freezes on macOS.  See issues 37849 and 41611.
+                acw.update()
+            acw_width, acw_height = acw.winfo_width(), acw.winfo_height()
+            text_width, text_height = text.winfo_width(), text.winfo_height()
+            new_x = text.winfo_rootx() + min(x, max(0, text_width - acw_width))
+            new_y = text.winfo_rooty() + y
+            if (text_height - (y + cy) >= acw_height # enough height below
+                or y < acw_height): # not enough height above
+                # place acw below current line
+                new_y += cy
+            else:
+                # place acw above current line
+                new_y -= acw_height
+            acw.wm_geometry("+%d+%d" % (new_x, new_y))
+            acw.deiconify()
+            acw.update_idletasks()
+        except TclError:
+            pass
+
+        if platform.system().startswith('Windows'):
+            # See issue 15786.  When on Windows platform, Tk will misbehave
+            # to call winconfig_event multiple times, we need to prevent this,
+            # otherwise mouse button double click will not be able to used.
+            try:
+                acw.unbind(WINCONFIG_SEQUENCE, self.winconfigid)
+            except TclError:
+                pass
+            self.winconfigid = None
+
+        self.is_configuring = False
+
+    def _hide_event_check(self):
+        if not self.autocompletewindow:
+            return
+
+        try:
+            if not self.autocompletewindow.focus_get():
+                self.hide_window()
+        except KeyError:
+            # See issue 734176, when user click on menu, acw.focus_get()
+            # will get KeyError.
+            self.hide_window()
+
+    def hide_event(self, event):
+        # Hide autocomplete list if it exists and does not have focus or
+        # mouse click on widget / text area.
+        if self.is_active():
+            if event.type == EventType.FocusOut:
+                # On Windows platform, it will need to delay the check for
+                # acw.focus_get() when click on acw, otherwise it will return
+                # None and close the window
+                self.widget.after(1, self._hide_event_check)
+            elif event.type == EventType.ButtonPress:
+                # ButtonPress event only bind to self.widget
+                self.hide_window()
+
+    def listselect_event(self, event):
+        if self.is_active():
+            self.userwantswindow = True
+            cursel = int(self.listbox.curselection()[0])
+            self._change_start(self.completions[cursel])
+
+    def doubleclick_event(self, event):
+        # Put the selected completion in the text, and close the list
+        cursel = int(self.listbox.curselection()[0])
+        self._change_start(self.completions[cursel])
+        self.hide_window()
+
+    def keypress_event(self, event):
+        if not self.is_active():
+            return None
+        keysym = event.keysym
+        if hasattr(event, "mc_state"):
+            state = event.mc_state
+        else:
+            state = 0
+        if keysym != "Tab":
+            self.lastkey_was_tab = False
+        if (len(keysym) == 1 or keysym in ("underscore", "BackSpace")
+            or (self.mode == FILES and keysym in
+                ("period", "minus"))) \
+           and not (state & ~MC_SHIFT):
+            # Normal editing of text
+            if len(keysym) == 1:
+                self._change_start(self.start + keysym)
+            elif keysym == "underscore":
+                self._change_start(self.start + '_')
+            elif keysym == "period":
+                self._change_start(self.start + '.')
+            elif keysym == "minus":
+                self._change_start(self.start + '-')
+            else:
+                # keysym == "BackSpace"
+                if len(self.start) == 0:
+                    self.hide_window()
+                    return None
+                self._change_start(self.start[:-1])
+            self.lasttypedstart = self.start
+            self.listbox.select_clear(0, int(self.listbox.curselection()[0]))
+            self.listbox.select_set(self._binary_search(self.start))
+            self._selection_changed()
+            return "break"
+
+        elif keysym == "Return":
+            self.complete()
+            self.hide_window()
+            return 'break'
+
+        elif (self.mode == ATTRS and keysym in
+              ("period", "space", "parenleft", "parenright", "bracketleft",
+               "bracketright")) or \
+             (self.mode == FILES and keysym in
+              ("slash", "backslash", "quotedbl", "apostrophe")) \
+             and not (state & ~MC_SHIFT):
+            # If start is a prefix of the selection, but is not '' when
+            # completing file names, put the whole
+            # selected completion. Anyway, close the list.
+            cursel = int(self.listbox.curselection()[0])
+            if self.completions[cursel][:len(self.start)] == self.start \
+               and (self.mode == ATTRS or self.start):
+                self._change_start(self.completions[cursel])
+            self.hide_window()
+            return None
+
+        elif keysym in ("Home", "End", "Prior", "Next", "Up", "Down") and \
+             not state:
+            # Move the selection in the listbox
+            self.userwantswindow = True
+            cursel = int(self.listbox.curselection()[0])
+            if keysym == "Home":
+                newsel = 0
+            elif keysym == "End":
+                newsel = len(self.completions)-1
+            elif keysym in ("Prior", "Next"):
+                jump = self.listbox.nearest(self.listbox.winfo_height()) - \
+                       self.listbox.nearest(0)
+                if keysym == "Prior":
+                    newsel = max(0, cursel-jump)
+                else:
+                    assert keysym == "Next"
+                    newsel = min(len(self.completions)-1, cursel+jump)
+            elif keysym == "Up":
+                newsel = max(0, cursel-1)
+            else:
+                assert keysym == "Down"
+                newsel = min(len(self.completions)-1, cursel+1)
+            self.listbox.select_clear(cursel)
+            self.listbox.select_set(newsel)
+            self._selection_changed()
+            self._change_start(self.completions[newsel])
+            return "break"
+
+        elif (keysym == "Tab" and not state):
+            if self.lastkey_was_tab:
+                # two tabs in a row; insert current selection and close acw
+                cursel = int(self.listbox.curselection()[0])
+                self._change_start(self.completions[cursel])
+                self.hide_window()
+                return "break"
+            else:
+                # first tab; let AutoComplete handle the completion
+                self.userwantswindow = True
+                self.lastkey_was_tab = True
+                return None
+
+        elif any(s in keysym for s in ("Shift", "Control", "Alt",
+                                       "Meta", "Command", "Option")):
+            # A modifier key, so ignore
+            return None
+
+        elif event.char and event.char >= ' ':
+            # Regular character with a non-length-1 keycode
+            self._change_start(self.start + event.char)
+            self.lasttypedstart = self.start
+            self.listbox.select_clear(0, int(self.listbox.curselection()[0]))
+            self.listbox.select_set(self._binary_search(self.start))
+            self._selection_changed()
+            return "break"
+
+        else:
+            # Unknown event, close the window and let it through.
+            self.hide_window()
+            return None
+
+    def keyrelease_event(self, event):
+        if not self.is_active():
+            return
+        if self.widget.index("insert") != \
+           self.widget.index("%s+%dc" % (self.startindex, len(self.start))):
+            # If we didn't catch an event which moved the insert, close window
+            self.hide_window()
+
+    def is_active(self):
+        return self.autocompletewindow is not None
+
+    def complete(self):
+        self._change_start(self._complete_string(self.start))
+        # The selection doesn't change.
+
+    def hide_window(self):
+        if not self.is_active():
+            return
+
+        # unbind events
+        self.autocompletewindow.event_delete(HIDE_VIRTUAL_EVENT_NAME,
+                                             HIDE_FOCUS_OUT_SEQUENCE)
+        for seq in HIDE_SEQUENCES:
+            self.widget.event_delete(HIDE_VIRTUAL_EVENT_NAME, seq)
+
+        self.autocompletewindow.unbind(HIDE_VIRTUAL_EVENT_NAME, self.hideaid)
+        self.widget.unbind(HIDE_VIRTUAL_EVENT_NAME, self.hidewid)
+        self.hideaid = None
+        self.hidewid = None
+        for seq in KEYPRESS_SEQUENCES:
+            self.widget.event_delete(KEYPRESS_VIRTUAL_EVENT_NAME, seq)
+        self.widget.unbind(KEYPRESS_VIRTUAL_EVENT_NAME, self.keypressid)
+        self.keypressid = None
+        self.widget.event_delete(KEYRELEASE_VIRTUAL_EVENT_NAME,
+                                 KEYRELEASE_SEQUENCE)
+        self.widget.unbind(KEYRELEASE_VIRTUAL_EVENT_NAME, self.keyreleaseid)
+        self.keyreleaseid = None
+        self.listbox.unbind(LISTUPDATE_SEQUENCE, self.listupdateid)
+        self.listupdateid = None
+        if self.winconfigid:
+            self.autocompletewindow.unbind(WINCONFIG_SEQUENCE, self.winconfigid)
+            self.winconfigid = None
+
+        # Re-focusOn frame.text (See issue #15786)
+        self.widget.focus_set()
+
+        # destroy widgets
+        self.scrollbar.destroy()
+        self.scrollbar = None
+        self.listbox.destroy()
+        self.listbox = None
+        self.autocompletewindow.destroy()
+        self.autocompletewindow = None
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_autocomplete_w', verbosity=2, exit=False)
+
+# TODO: autocomplete/w htest here
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autoexpand.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autoexpand.py
new file mode 100644
index 0000000000000000000000000000000000000000..92f5c84eb6f40195c1bfa989002304a6c8d76cad
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/autoexpand.py
@@ -0,0 +1,96 @@
+'''Complete the current word before the cursor with words in the editor.
+
+Each menu selection or shortcut key selection replaces the word with a
+different word with the same prefix. The search for matches begins
+before the target and moves toward the top of the editor. It then starts
+after the cursor and moves down. It then returns to the original word and
+the cycle starts again.
+
+Changing the current text line or leaving the cursor in a different
+place before requesting the next selection causes AutoExpand to reset
+its state.
+
+There is only one instance of Autoexpand.
+'''
+import re
+import string
+
+
+class AutoExpand:
+    wordchars = string.ascii_letters + string.digits + "_"
+
+    def __init__(self, editwin):
+        self.text = editwin.text
+        self.bell = self.text.bell
+        self.state = None
+
+    def expand_word_event(self, event):
+        "Replace the current word with the next expansion."
+        curinsert = self.text.index("insert")
+        curline = self.text.get("insert linestart", "insert lineend")
+        if not self.state:
+            words = self.getwords()
+            index = 0
+        else:
+            words, index, insert, line = self.state
+            if insert != curinsert or line != curline:
+                words = self.getwords()
+                index = 0
+        if not words:
+            self.bell()
+            return "break"
+        word = self.getprevword()
+        self.text.delete("insert - %d chars" % len(word), "insert")
+        newword = words[index]
+        index = (index + 1) % len(words)
+        if index == 0:
+            self.bell()            # Warn we cycled around
+        self.text.insert("insert", newword)
+        curinsert = self.text.index("insert")
+        curline = self.text.get("insert linestart", "insert lineend")
+        self.state = words, index, curinsert, curline
+        return "break"
+
+    def getwords(self):
+        "Return a list of words that match the prefix before the cursor."
+        word = self.getprevword()
+        if not word:
+            return []
+        before = self.text.get("1.0", "insert wordstart")
+        wbefore = re.findall(r"\b" + word + r"\w+\b", before)
+        del before
+        after = self.text.get("insert wordend", "end")
+        wafter = re.findall(r"\b" + word + r"\w+\b", after)
+        del after
+        if not wbefore and not wafter:
+            return []
+        words = []
+        dict = {}
+        # search backwards through words before
+        wbefore.reverse()
+        for w in wbefore:
+            if dict.get(w):
+                continue
+            words.append(w)
+            dict[w] = w
+        # search onwards through words after
+        for w in wafter:
+            if dict.get(w):
+                continue
+            words.append(w)
+            dict[w] = w
+        words.append(word)
+        return words
+
+    def getprevword(self):
+        "Return the word prefix before the cursor."
+        line = self.text.get("insert linestart", "insert")
+        i = len(line)
+        while i > 0 and line[i-1] in self.wordchars:
+            i = i-1
+        return line[i:]
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_autoexpand', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/browser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/browser.py
new file mode 100644
index 0000000000000000000000000000000000000000..8b9060e57072ea041f1f3b31ccd5ba1e3ab377de
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/browser.py
@@ -0,0 +1,260 @@
+"""Module browser.
+
+XXX TO DO:
+
+- reparse when source changed (maybe just a button would be OK?)
+    (or recheck on window popup)
+- add popup menu with more options (e.g. doc strings, base classes, imports)
+- add base classes to class browser tree
+"""
+
+import os
+import pyclbr
+import sys
+
+from idlelib.config import idleConf
+from idlelib import pyshell
+from idlelib.tree import TreeNode, TreeItem, ScrolledCanvas
+from idlelib.util import py_extensions
+from idlelib.window import ListedToplevel
+
+
+file_open = None  # Method...Item and Class...Item use this.
+# Normally pyshell.flist.open, but there is no pyshell.flist for htest.
+
+# The browser depends on pyclbr and importlib which do not support .pyi files.
+browseable_extension_blocklist = ('.pyi',)
+
+
+def is_browseable_extension(path):
+    _, ext = os.path.splitext(path)
+    ext = os.path.normcase(ext)
+    return ext in py_extensions and ext not in browseable_extension_blocklist
+
+
+def transform_children(child_dict, modname=None):
+    """Transform a child dictionary to an ordered sequence of objects.
+
+    The dictionary maps names to pyclbr information objects.
+    Filter out imported objects.
+    Augment class names with bases.
+    The insertion order of the dictionary is assumed to have been in line
+    number order, so sorting is not necessary.
+
+    The current tree only calls this once per child_dict as it saves
+    TreeItems once created.  A future tree and tests might violate this,
+    so a check prevents multiple in-place augmentations.
+    """
+    obs = []  # Use list since values should already be sorted.
+    for key, obj in child_dict.items():
+        if modname is None or obj.module == modname:
+            if hasattr(obj, 'super') and obj.super and obj.name == key:
+                # If obj.name != key, it has already been suffixed.
+                supers = []
+                for sup in obj.super:
+                    if isinstance(sup, str):
+                        sname = sup
+                    else:
+                        sname = sup.name
+                        if sup.module != obj.module:
+                            sname = f'{sup.module}.{sname}'
+                    supers.append(sname)
+                obj.name += '({})'.format(', '.join(supers))
+            obs.append(obj)
+    return obs
+
+
+class ModuleBrowser:
+    """Browse module classes and functions in IDLE.
+    """
+    # This class is also the base class for pathbrowser.PathBrowser.
+    # Init and close are inherited, other methods are overridden.
+    # PathBrowser.__init__ does not call __init__ below.
+
+    def __init__(self, master, path, *, _htest=False, _utest=False):
+        """Create a window for browsing a module's structure.
+
+        Args:
+            master: parent for widgets.
+            path: full path of file to browse.
+            _htest - bool; change box location when running htest.
+            -utest - bool; suppress contents when running unittest.
+
+        Global variables:
+            file_open: Function used for opening a file.
+
+        Instance variables:
+            name: Module name.
+            file: Full path and module with supported extension.
+                Used in creating ModuleBrowserTreeItem as the rootnode for
+                the tree and subsequently in the children.
+        """
+        self.master = master
+        self.path = path
+        self._htest = _htest
+        self._utest = _utest
+        self.init()
+
+    def close(self, event=None):
+        "Dismiss the window and the tree nodes."
+        self.top.destroy()
+        self.node.destroy()
+
+    def init(self):
+        "Create browser tkinter widgets, including the tree."
+        global file_open
+        root = self.master
+        flist = (pyshell.flist if not (self._htest or self._utest)
+                 else pyshell.PyShellFileList(root))
+        file_open = flist.open
+        pyclbr._modules.clear()
+
+        # create top
+        self.top = top = ListedToplevel(root)
+        top.protocol("WM_DELETE_WINDOW", self.close)
+        top.bind("<Escape>", self.close)
+        if self._htest: # place dialog below parent if running htest
+            top.geometry("+%d+%d" %
+                (root.winfo_rootx(), root.winfo_rooty() + 200))
+        self.settitle()
+        top.focus_set()
+
+        # create scrolled canvas
+        theme = idleConf.CurrentTheme()
+        background = idleConf.GetHighlight(theme, 'normal')['background']
+        sc = ScrolledCanvas(top, bg=background, highlightthickness=0,
+                            takefocus=1)
+        sc.frame.pack(expand=1, fill="both")
+        item = self.rootnode()
+        self.node = node = TreeNode(sc.canvas, None, item)
+        if not self._utest:
+            node.update()
+            node.expand()
+
+    def settitle(self):
+        "Set the window title."
+        self.top.wm_title("Module Browser - " + os.path.basename(self.path))
+        self.top.wm_iconname("Module Browser")
+
+    def rootnode(self):
+        "Return a ModuleBrowserTreeItem as the root of the tree."
+        return ModuleBrowserTreeItem(self.path)
+
+
+class ModuleBrowserTreeItem(TreeItem):
+    """Browser tree for Python module.
+
+    Uses TreeItem as the basis for the structure of the tree.
+    Used by both browsers.
+    """
+
+    def __init__(self, file):
+        """Create a TreeItem for the file.
+
+        Args:
+            file: Full path and module name.
+        """
+        self.file = file
+
+    def GetText(self):
+        "Return the module name as the text string to display."
+        return os.path.basename(self.file)
+
+    def GetIconName(self):
+        "Return the name of the icon to display."
+        return "python"
+
+    def GetSubList(self):
+        "Return ChildBrowserTreeItems for children."
+        return [ChildBrowserTreeItem(obj) for obj in self.listchildren()]
+
+    def OnDoubleClick(self):
+        "Open a module in an editor window when double clicked."
+        if not is_browseable_extension(self.file):
+            return
+        if not os.path.exists(self.file):
+            return
+        file_open(self.file)
+
+    def IsExpandable(self):
+        "Return True if Python file."
+        return is_browseable_extension(self.file)
+
+    def listchildren(self):
+        "Return sequenced classes and functions in the module."
+        if not is_browseable_extension(self.file):
+            return []
+        dir, base = os.path.split(self.file)
+        name, _ = os.path.splitext(base)
+        try:
+            tree = pyclbr.readmodule_ex(name, [dir] + sys.path)
+        except ImportError:
+            return []
+        return transform_children(tree, name)
+
+
+class ChildBrowserTreeItem(TreeItem):
+    """Browser tree for child nodes within the module.
+
+    Uses TreeItem as the basis for the structure of the tree.
+    """
+
+    def __init__(self, obj):
+        "Create a TreeItem for a pyclbr class/function object."
+        self.obj = obj
+        self.name = obj.name
+        self.isfunction = isinstance(obj, pyclbr.Function)
+
+    def GetText(self):
+        "Return the name of the function/class to display."
+        name = self.name
+        if self.isfunction:
+            return "def " + name + "(...)"
+        else:
+            return "class " + name
+
+    def GetIconName(self):
+        "Return the name of the icon to display."
+        if self.isfunction:
+            return "python"
+        else:
+            return "folder"
+
+    def IsExpandable(self):
+        "Return True if self.obj has nested objects."
+        return self.obj.children != {}
+
+    def GetSubList(self):
+        "Return ChildBrowserTreeItems for children."
+        return [ChildBrowserTreeItem(obj)
+                for obj in transform_children(self.obj.children)]
+
+    def OnDoubleClick(self):
+        "Open module with file_open and position to lineno."
+        try:
+            edit = file_open(self.obj.file)
+            edit.gotoline(self.obj.lineno)
+        except (OSError, AttributeError):
+            pass
+
+
+def _module_browser(parent): # htest #
+    if len(sys.argv) > 1:  # If pass file on command line.
+        file = sys.argv[1]
+    else:
+        file = __file__
+        # Add nested objects for htest.
+        class Nested_in_func(TreeNode):
+            def nested_in_class(): pass
+        def closure():
+            class Nested_in_closure: pass
+    ModuleBrowser(parent, file, _htest=True)
+
+
+if __name__ == "__main__":
+    if len(sys.argv) == 1:  # If pass file on command line, unittest fails.
+        from unittest import main
+        main('idlelib.idle_test.test_browser', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_module_browser)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip.py
new file mode 100644
index 0000000000000000000000000000000000000000..40bc5a0ad798fe3eeef6ff38f79f74747b45a21f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip.py
@@ -0,0 +1,205 @@
+"""Pop up a reminder of how to call a function.
+
+Call Tips are floating windows which display function, class, and method
+parameter and docstring information when you type an opening parenthesis, and
+which disappear when you type a closing parenthesis.
+"""
+import __main__
+import inspect
+import re
+import sys
+import textwrap
+import types
+
+from idlelib import calltip_w
+from idlelib.hyperparser import HyperParser
+
+
+class Calltip:
+
+    def __init__(self, editwin=None):
+        if editwin is None:  # subprocess and test
+            self.editwin = None
+        else:
+            self.editwin = editwin
+            self.text = editwin.text
+            self.active_calltip = None
+            self._calltip_window = self._make_tk_calltip_window
+
+    def close(self):
+        self._calltip_window = None
+
+    def _make_tk_calltip_window(self):
+        # See __init__ for usage
+        return calltip_w.CalltipWindow(self.text)
+
+    def remove_calltip_window(self, event=None):
+        if self.active_calltip:
+            self.active_calltip.hidetip()
+            self.active_calltip = None
+
+    def force_open_calltip_event(self, event):
+        "The user selected the menu entry or hotkey, open the tip."
+        self.open_calltip(True)
+        return "break"
+
+    def try_open_calltip_event(self, event):
+        """Happens when it would be nice to open a calltip, but not really
+        necessary, for example after an opening bracket, so function calls
+        won't be made.
+        """
+        self.open_calltip(False)
+
+    def refresh_calltip_event(self, event):
+        if self.active_calltip and self.active_calltip.tipwindow:
+            self.open_calltip(False)
+
+    def open_calltip(self, evalfuncs):
+        """Maybe close an existing calltip and maybe open a new calltip.
+
+        Called from (force_open|try_open|refresh)_calltip_event functions.
+        """
+        hp = HyperParser(self.editwin, "insert")
+        sur_paren = hp.get_surrounding_brackets('(')
+
+        # If not inside parentheses, no calltip.
+        if not sur_paren:
+            self.remove_calltip_window()
+            return
+
+        # If a calltip is shown for the current parentheses, do
+        # nothing.
+        if self.active_calltip:
+            opener_line, opener_col = map(int, sur_paren[0].split('.'))
+            if (
+                (opener_line, opener_col) ==
+                (self.active_calltip.parenline, self.active_calltip.parencol)
+            ):
+                return
+
+        hp.set_index(sur_paren[0])
+        try:
+            expression = hp.get_expression()
+        except ValueError:
+            expression = None
+        if not expression:
+            # No expression before the opening parenthesis, e.g.
+            # because it's in a string or the opener for a tuple:
+            # Do nothing.
+            return
+
+        # At this point, the current index is after an opening
+        # parenthesis, in a section of code, preceded by a valid
+        # expression. If there is a calltip shown, it's not for the
+        # same index and should be closed.
+        self.remove_calltip_window()
+
+        # Simple, fast heuristic: If the preceding expression includes
+        # an opening parenthesis, it likely includes a function call.
+        if not evalfuncs and (expression.find('(') != -1):
+            return
+
+        argspec = self.fetch_tip(expression)
+        if not argspec:
+            return
+        self.active_calltip = self._calltip_window()
+        self.active_calltip.showtip(argspec, sur_paren[0], sur_paren[1])
+
+    def fetch_tip(self, expression):
+        """Return the argument list and docstring of a function or class.
+
+        If there is a Python subprocess, get the calltip there.  Otherwise,
+        either this fetch_tip() is running in the subprocess or it was
+        called in an IDLE running without the subprocess.
+
+        The subprocess environment is that of the most recently run script.  If
+        two unrelated modules are being edited some calltips in the current
+        module may be inoperative if the module was not the last to run.
+
+        To find methods, fetch_tip must be fed a fully qualified name.
+
+        """
+        try:
+            rpcclt = self.editwin.flist.pyshell.interp.rpcclt
+        except AttributeError:
+            rpcclt = None
+        if rpcclt:
+            return rpcclt.remotecall("exec", "get_the_calltip",
+                                     (expression,), {})
+        else:
+            return get_argspec(get_entity(expression))
+
+
+def get_entity(expression):
+    """Return the object corresponding to expression evaluated
+    in a namespace spanning sys.modules and __main.dict__.
+    """
+    if expression:
+        namespace = {**sys.modules, **__main__.__dict__}
+        try:
+            return eval(expression, namespace)  # Only protect user code.
+        except BaseException:
+            # An uncaught exception closes idle, and eval can raise any
+            # exception, especially if user classes are involved.
+            return None
+
+# The following are used in get_argspec and some in tests
+_MAX_COLS = 85
+_MAX_LINES = 5  # enough for bytes
+_INDENT = ' '*4  # for wrapped signatures
+_first_param = re.compile(r'(?<=\()\w*\,?\s*')
+_default_callable_argspec = "See source or doc"
+_invalid_method = "invalid method signature"
+
+def get_argspec(ob):
+    '''Return a string describing the signature of a callable object, or ''.
+
+    For Python-coded functions and methods, the first line is introspected.
+    Delete 'self' parameter for classes (.__init__) and bound methods.
+    The next lines are the first lines of the doc string up to the first
+    empty line or _MAX_LINES.    For builtins, this typically includes
+    the arguments in addition to the return value.
+    '''
+    # Determine function object fob to inspect.
+    try:
+        ob_call = ob.__call__
+    except BaseException:  # Buggy user object could raise anything.
+        return ''  # No popup for non-callables.
+    # For Get_argspecTest.test_buggy_getattr_class, CallA() & CallB().
+    fob = ob_call if isinstance(ob_call, types.MethodType) else ob
+
+    # Initialize argspec and wrap it to get lines.
+    try:
+        argspec = str(inspect.signature(fob))
+    except Exception as err:
+        msg = str(err)
+        if msg.startswith(_invalid_method):
+            return _invalid_method
+        else:
+            argspec = ''
+
+    if isinstance(fob, type) and argspec == '()':
+        # If fob has no argument, use default callable argspec.
+        argspec = _default_callable_argspec
+
+    lines = (textwrap.wrap(argspec, _MAX_COLS, subsequent_indent=_INDENT)
+             if len(argspec) > _MAX_COLS else [argspec] if argspec else [])
+
+    # Augment lines from docstring, if any, and join to get argspec.
+    doc = inspect.getdoc(ob)
+    if doc:
+        for line in doc.split('\n', _MAX_LINES)[:_MAX_LINES]:
+            line = line.strip()
+            if not line:
+                break
+            if len(line) > _MAX_COLS:
+                line = line[: _MAX_COLS - 3] + '...'
+            lines.append(line)
+    argspec = '\n'.join(lines)
+
+    return argspec or _default_callable_argspec
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_calltip', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip_w.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip_w.py
new file mode 100644
index 0000000000000000000000000000000000000000..9386376058c79164f221ce6d1532a156ad021245
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/calltip_w.py
@@ -0,0 +1,202 @@
+"""A call-tip window class for Tkinter/IDLE.
+
+After tooltip.py, which uses ideas gleaned from PySol.
+Used by calltip.py.
+"""
+from tkinter import Label, LEFT, SOLID, TclError
+
+from idlelib.tooltip import TooltipBase
+
+HIDE_EVENT = "<<calltipwindow-hide>>"
+HIDE_SEQUENCES = ("<Key-Escape>", "<FocusOut>")
+CHECKHIDE_EVENT = "<<calltipwindow-checkhide>>"
+CHECKHIDE_SEQUENCES = ("<KeyRelease>", "<ButtonRelease>")
+CHECKHIDE_TIME = 100  # milliseconds
+
+MARK_RIGHT = "calltipwindowregion_right"
+
+
+class CalltipWindow(TooltipBase):
+    """A call-tip widget for tkinter text widgets."""
+
+    def __init__(self, text_widget):
+        """Create a call-tip; shown by showtip().
+
+        text_widget: a Text widget with code for which call-tips are desired
+        """
+        # Note: The Text widget will be accessible as self.anchor_widget
+        super().__init__(text_widget)
+
+        self.label = self.text = None
+        self.parenline = self.parencol = self.lastline = None
+        self.hideid = self.checkhideid = None
+        self.checkhide_after_id = None
+
+    def get_position(self):
+        """Choose the position of the call-tip."""
+        curline = int(self.anchor_widget.index("insert").split('.')[0])
+        if curline == self.parenline:
+            anchor_index = (self.parenline, self.parencol)
+        else:
+            anchor_index = (curline, 0)
+        box = self.anchor_widget.bbox("%d.%d" % anchor_index)
+        if not box:
+            box = list(self.anchor_widget.bbox("insert"))
+            # align to left of window
+            box[0] = 0
+            box[2] = 0
+        return box[0] + 2, box[1] + box[3]
+
+    def position_window(self):
+        "Reposition the window if needed."
+        curline = int(self.anchor_widget.index("insert").split('.')[0])
+        if curline == self.lastline:
+            return
+        self.lastline = curline
+        self.anchor_widget.see("insert")
+        super().position_window()
+
+    def showtip(self, text, parenleft, parenright):
+        """Show the call-tip, bind events which will close it and reposition it.
+
+        text: the text to display in the call-tip
+        parenleft: index of the opening parenthesis in the text widget
+        parenright: index of the closing parenthesis in the text widget,
+                    or the end of the line if there is no closing parenthesis
+        """
+        # Only called in calltip.Calltip, where lines are truncated
+        self.text = text
+        if self.tipwindow or not self.text:
+            return
+
+        self.anchor_widget.mark_set(MARK_RIGHT, parenright)
+        self.parenline, self.parencol = map(
+            int, self.anchor_widget.index(parenleft).split("."))
+
+        super().showtip()
+
+        self._bind_events()
+
+    def showcontents(self):
+        """Create the call-tip widget."""
+        self.label = Label(self.tipwindow, text=self.text, justify=LEFT,
+                           background="#ffffd0", foreground="black",
+                           relief=SOLID, borderwidth=1,
+                           font=self.anchor_widget['font'])
+        self.label.pack()
+
+    def checkhide_event(self, event=None):
+        """Handle CHECK_HIDE_EVENT: call hidetip or reschedule."""
+        if not self.tipwindow:
+            # If the event was triggered by the same event that unbound
+            # this function, the function will be called nevertheless,
+            # so do nothing in this case.
+            return None
+
+        # Hide the call-tip if the insertion cursor moves outside of the
+        # parenthesis.
+        curline, curcol = map(int, self.anchor_widget.index("insert").split('.'))
+        if curline < self.parenline or \
+           (curline == self.parenline and curcol <= self.parencol) or \
+           self.anchor_widget.compare("insert", ">", MARK_RIGHT):
+            self.hidetip()
+            return "break"
+
+        # Not hiding the call-tip.
+
+        self.position_window()
+        # Re-schedule this function to be called again in a short while.
+        if self.checkhide_after_id is not None:
+            self.anchor_widget.after_cancel(self.checkhide_after_id)
+        self.checkhide_after_id = \
+            self.anchor_widget.after(CHECKHIDE_TIME, self.checkhide_event)
+        return None
+
+    def hide_event(self, event):
+        """Handle HIDE_EVENT by calling hidetip."""
+        if not self.tipwindow:
+            # See the explanation in checkhide_event.
+            return None
+        self.hidetip()
+        return "break"
+
+    def hidetip(self):
+        """Hide the call-tip."""
+        if not self.tipwindow:
+            return
+
+        try:
+            self.label.destroy()
+        except TclError:
+            pass
+        self.label = None
+
+        self.parenline = self.parencol = self.lastline = None
+        try:
+            self.anchor_widget.mark_unset(MARK_RIGHT)
+        except TclError:
+            pass
+
+        try:
+            self._unbind_events()
+        except (TclError, ValueError):
+            # ValueError may be raised by MultiCall
+            pass
+
+        super().hidetip()
+
+    def _bind_events(self):
+        """Bind event handlers."""
+        self.checkhideid = self.anchor_widget.bind(CHECKHIDE_EVENT,
+                                                   self.checkhide_event)
+        for seq in CHECKHIDE_SEQUENCES:
+            self.anchor_widget.event_add(CHECKHIDE_EVENT, seq)
+        self.anchor_widget.after(CHECKHIDE_TIME, self.checkhide_event)
+        self.hideid = self.anchor_widget.bind(HIDE_EVENT,
+                                              self.hide_event)
+        for seq in HIDE_SEQUENCES:
+            self.anchor_widget.event_add(HIDE_EVENT, seq)
+
+    def _unbind_events(self):
+        """Unbind event handlers."""
+        for seq in CHECKHIDE_SEQUENCES:
+            self.anchor_widget.event_delete(CHECKHIDE_EVENT, seq)
+        self.anchor_widget.unbind(CHECKHIDE_EVENT, self.checkhideid)
+        self.checkhideid = None
+        for seq in HIDE_SEQUENCES:
+            self.anchor_widget.event_delete(HIDE_EVENT, seq)
+        self.anchor_widget.unbind(HIDE_EVENT, self.hideid)
+        self.hideid = None
+
+
+def _calltip_window(parent):  # htest #
+    from tkinter import Toplevel, Text, LEFT, BOTH
+
+    top = Toplevel(parent)
+    top.title("Test call-tips")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("250x100+%d+%d" % (x + 175, y + 150))
+    text = Text(top)
+    text.pack(side=LEFT, fill=BOTH, expand=1)
+    text.insert("insert", "string.split")
+    top.update()
+
+    calltip = CalltipWindow(text)
+    def calltip_show(event):
+        calltip.showtip("(s='Hello world')", "insert", "end")
+    def calltip_hide(event):
+        calltip.hidetip()
+    text.event_add("<<calltip-show>>", "(")
+    text.event_add("<<calltip-hide>>", ")")
+    text.bind("<<calltip-show>>", calltip_show)
+    text.bind("<<calltip-hide>>", calltip_hide)
+
+    text.focus_set()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_calltip_w', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_calltip_window)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/codecontext.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/codecontext.py
new file mode 100644
index 0000000000000000000000000000000000000000..f2f44f5f8d4e6112c75a4845e89ba005245abd9b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/codecontext.py
@@ -0,0 +1,270 @@
+"""codecontext - display the block context above the edit window
+
+Once code has scrolled off the top of a window, it can be difficult to
+determine which block you are in.  This extension implements a pane at the top
+of each IDLE edit window which provides block structure hints.  These hints are
+the lines which contain the block opening keywords, e.g. 'if', for the
+enclosing block.  The number of hint lines is determined by the maxlines
+variable in the codecontext section of config-extensions.def. Lines which do
+not open blocks are not shown in the context hints pane.
+
+For EditorWindows, <<toggle-code-context>> is bound to CodeContext(self).
+toggle_code_context_event.
+"""
+import re
+from sys import maxsize as INFINITY
+
+from tkinter import Frame, Text, TclError
+from tkinter.constants import NSEW, SUNKEN
+
+from idlelib.config import idleConf
+
+BLOCKOPENERS = {'class', 'def', 'if', 'elif', 'else', 'while', 'for',
+                 'try', 'except', 'finally', 'with', 'async'}
+
+
+def get_spaces_firstword(codeline, c=re.compile(r"^(\s*)(\w*)")):
+    "Extract the beginning whitespace and first word from codeline."
+    return c.match(codeline).groups()
+
+
+def get_line_info(codeline):
+    """Return tuple of (line indent value, codeline, block start keyword).
+
+    The indentation of empty lines (or comment lines) is INFINITY.
+    If the line does not start a block, the keyword value is False.
+    """
+    spaces, firstword = get_spaces_firstword(codeline)
+    indent = len(spaces)
+    if len(codeline) == indent or codeline[indent] == '#':
+        indent = INFINITY
+    opener = firstword in BLOCKOPENERS and firstword
+    return indent, codeline, opener
+
+
+class CodeContext:
+    "Display block context above the edit window."
+    UPDATEINTERVAL = 100  # millisec
+
+    def __init__(self, editwin):
+        """Initialize settings for context block.
+
+        editwin is the Editor window for the context block.
+        self.text is the editor window text widget.
+
+        self.context displays the code context text above the editor text.
+          Initially None, it is toggled via <<toggle-code-context>>.
+        self.topvisible is the number of the top text line displayed.
+        self.info is a list of (line number, indent level, line text,
+          block keyword) tuples for the block structure above topvisible.
+          self.info[0] is initialized with a 'dummy' line which
+          starts the toplevel 'block' of the module.
+
+        self.t1 and self.t2 are two timer events on the editor text widget to
+          monitor for changes to the context text or editor font.
+        """
+        self.editwin = editwin
+        self.text = editwin.text
+        self._reset()
+
+    def _reset(self):
+        self.context = None
+        self.cell00 = None
+        self.t1 = None
+        self.topvisible = 1
+        self.info = [(0, -1, "", False)]
+
+    @classmethod
+    def reload(cls):
+        "Load class variables from config."
+        cls.context_depth = idleConf.GetOption("extensions", "CodeContext",
+                                               "maxlines", type="int",
+                                               default=15)
+
+    def __del__(self):
+        "Cancel scheduled events."
+        if self.t1 is not None:
+            try:
+                self.text.after_cancel(self.t1)
+            except TclError:  # pragma: no cover
+                pass
+            self.t1 = None
+
+    def toggle_code_context_event(self, event=None):
+        """Toggle code context display.
+
+        If self.context doesn't exist, create it to match the size of the editor
+        window text (toggle on).  If it does exist, destroy it (toggle off).
+        Return 'break' to complete the processing of the binding.
+        """
+        if self.context is None:
+            # Calculate the border width and horizontal padding required to
+            # align the context with the text in the main Text widget.
+            #
+            # All values are passed through getint(), since some
+            # values may be pixel objects, which can't simply be added to ints.
+            widgets = self.editwin.text, self.editwin.text_frame
+            # Calculate the required horizontal padding and border width.
+            padx = 0
+            border = 0
+            for widget in widgets:
+                info = (widget.grid_info()
+                        if widget is self.editwin.text
+                        else widget.pack_info())
+                padx += widget.tk.getint(info['padx'])
+                padx += widget.tk.getint(widget.cget('padx'))
+                border += widget.tk.getint(widget.cget('border'))
+            context = self.context = Text(
+                self.editwin.text_frame,
+                height=1,
+                width=1,  # Don't request more than we get.
+                highlightthickness=0,
+                padx=padx, border=border, relief=SUNKEN, state='disabled')
+            self.update_font()
+            self.update_highlight_colors()
+            context.bind('<ButtonRelease-1>', self.jumptoline)
+            # Get the current context and initiate the recurring update event.
+            self.timer_event()
+            # Grid the context widget above the text widget.
+            context.grid(row=0, column=1, sticky=NSEW)
+
+            line_number_colors = idleConf.GetHighlight(idleConf.CurrentTheme(),
+                                                       'linenumber')
+            self.cell00 = Frame(self.editwin.text_frame,
+                                        bg=line_number_colors['background'])
+            self.cell00.grid(row=0, column=0, sticky=NSEW)
+            menu_status = 'Hide'
+        else:
+            self.context.destroy()
+            self.context = None
+            self.cell00.destroy()
+            self.cell00 = None
+            self.text.after_cancel(self.t1)
+            self._reset()
+            menu_status = 'Show'
+        self.editwin.update_menu_label(menu='options', index='*ode*ontext',
+                                       label=f'{menu_status} Code Context')
+        return "break"
+
+    def get_context(self, new_topvisible, stopline=1, stopindent=0):
+        """Return a list of block line tuples and the 'last' indent.
+
+        The tuple fields are (linenum, indent, text, opener).
+        The list represents header lines from new_topvisible back to
+        stopline with successively shorter indents > stopindent.
+        The list is returned ordered by line number.
+        Last indent returned is the smallest indent observed.
+        """
+        assert stopline > 0
+        lines = []
+        # The indentation level we are currently in.
+        lastindent = INFINITY
+        # For a line to be interesting, it must begin with a block opening
+        # keyword, and have less indentation than lastindent.
+        for linenum in range(new_topvisible, stopline-1, -1):
+            codeline = self.text.get(f'{linenum}.0', f'{linenum}.end')
+            indent, text, opener = get_line_info(codeline)
+            if indent < lastindent:
+                lastindent = indent
+                if opener in ("else", "elif"):
+                    # Also show the if statement.
+                    lastindent += 1
+                if opener and linenum < new_topvisible and indent >= stopindent:
+                    lines.append((linenum, indent, text, opener))
+                if lastindent <= stopindent:
+                    break
+        lines.reverse()
+        return lines, lastindent
+
+    def update_code_context(self):
+        """Update context information and lines visible in the context pane.
+
+        No update is done if the text hasn't been scrolled.  If the text
+        was scrolled, the lines that should be shown in the context will
+        be retrieved and the context area will be updated with the code,
+        up to the number of maxlines.
+        """
+        new_topvisible = self.editwin.getlineno("@0,0")
+        if self.topvisible == new_topvisible:      # Haven't scrolled.
+            return
+        if self.topvisible < new_topvisible:       # Scroll down.
+            lines, lastindent = self.get_context(new_topvisible,
+                                                 self.topvisible)
+            # Retain only context info applicable to the region
+            # between topvisible and new_topvisible.
+            while self.info[-1][1] >= lastindent:
+                del self.info[-1]
+        else:  # self.topvisible > new_topvisible: # Scroll up.
+            stopindent = self.info[-1][1] + 1
+            # Retain only context info associated
+            # with lines above new_topvisible.
+            while self.info[-1][0] >= new_topvisible:
+                stopindent = self.info[-1][1]
+                del self.info[-1]
+            lines, lastindent = self.get_context(new_topvisible,
+                                                 self.info[-1][0]+1,
+                                                 stopindent)
+        self.info.extend(lines)
+        self.topvisible = new_topvisible
+        # Last context_depth context lines.
+        context_strings = [x[2] for x in self.info[-self.context_depth:]]
+        showfirst = 0 if context_strings[0] else 1
+        # Update widget.
+        self.context['height'] = len(context_strings) - showfirst
+        self.context['state'] = 'normal'
+        self.context.delete('1.0', 'end')
+        self.context.insert('end', '\n'.join(context_strings[showfirst:]))
+        self.context['state'] = 'disabled'
+
+    def jumptoline(self, event=None):
+        """ Show clicked context line at top of editor.
+
+        If a selection was made, don't jump; allow copying.
+        If no visible context, show the top line of the file.
+        """
+        try:
+            self.context.index("sel.first")
+        except TclError:
+            lines = len(self.info)
+            if lines == 1:  # No context lines are showing.
+                newtop = 1
+            else:
+                # Line number clicked.
+                contextline = int(float(self.context.index('insert')))
+                # Lines not displayed due to maxlines.
+                offset = max(1, lines - self.context_depth) - 1
+                newtop = self.info[offset + contextline][0]
+            self.text.yview(f'{newtop}.0')
+            self.update_code_context()
+
+    def timer_event(self):
+        "Event on editor text widget triggered every UPDATEINTERVAL ms."
+        if self.context is not None:
+            self.update_code_context()
+            self.t1 = self.text.after(self.UPDATEINTERVAL, self.timer_event)
+
+    def update_font(self):
+        if self.context is not None:
+            font = idleConf.GetFont(self.text, 'main', 'EditorWindow')
+            self.context['font'] = font
+
+    def update_highlight_colors(self):
+        if self.context is not None:
+            colors = idleConf.GetHighlight(idleConf.CurrentTheme(), 'context')
+            self.context['background'] = colors['background']
+            self.context['foreground'] = colors['foreground']
+
+        if self.cell00 is not None:
+            line_number_colors = idleConf.GetHighlight(idleConf.CurrentTheme(),
+                                                       'linenumber')
+            self.cell00.config(bg=line_number_colors['background'])
+
+
+CodeContext.reload()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_codecontext', verbosity=2, exit=False)
+
+    # Add htest.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/colorizer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/colorizer.py
new file mode 100644
index 0000000000000000000000000000000000000000..bffa2ddd3cd9cd2cb6c33143cc9bf0f0e137c704
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/colorizer.py
@@ -0,0 +1,384 @@
+import builtins
+import keyword
+import re
+import time
+
+from idlelib.config import idleConf
+from idlelib.delegator import Delegator
+
+DEBUG = False
+
+
+def any(name, alternates):
+    "Return a named group pattern matching list of alternates."
+    return "(?P<%s>" % name + "|".join(alternates) + ")"
+
+
+def make_pat():
+    kw = r"\b" + any("KEYWORD", keyword.kwlist) + r"\b"
+    match_softkw = (
+        r"^[ \t]*" +  # at beginning of line + possible indentation
+        r"(?P<MATCH_SOFTKW>match)\b" +
+        r"(?![ \t]*(?:" + "|".join([  # not followed by ...
+            r"[:,;=^&|@~)\]}]",  # a character which means it can't be a
+                                 # pattern-matching statement
+            r"\b(?:" + r"|".join(keyword.kwlist) + r")\b",  # a keyword
+        ]) +
+        r"))"
+    )
+    case_default = (
+        r"^[ \t]*" +  # at beginning of line + possible indentation
+        r"(?P<CASE_SOFTKW>case)" +
+        r"[ \t]+(?P<CASE_DEFAULT_UNDERSCORE>_\b)"
+    )
+    case_softkw_and_pattern = (
+        r"^[ \t]*" +  # at beginning of line + possible indentation
+        r"(?P<CASE_SOFTKW2>case)\b" +
+        r"(?![ \t]*(?:" + "|".join([  # not followed by ...
+            r"_\b",  # a lone underscore
+            r"[:,;=^&|@~)\]}]",  # a character which means it can't be a
+                                 # pattern-matching case
+            r"\b(?:" + r"|".join(keyword.kwlist) + r")\b",  # a keyword
+        ]) +
+        r"))"
+    )
+    builtinlist = [str(name) for name in dir(builtins)
+                   if not name.startswith('_') and
+                   name not in keyword.kwlist]
+    builtin = r"([^.'\"\\#]\b|^)" + any("BUILTIN", builtinlist) + r"\b"
+    comment = any("COMMENT", [r"#[^\n]*"])
+    stringprefix = r"(?i:r|u|f|fr|rf|b|br|rb|t|rt|tr)?"
+    sqstring = stringprefix + r"'[^'\\\n]*(\\.[^'\\\n]*)*'?"
+    dqstring = stringprefix + r'"[^"\\\n]*(\\.[^"\\\n]*)*"?'
+    sq3string = stringprefix + r"'''[^'\\]*((\\.|'(?!''))[^'\\]*)*(''')?"
+    dq3string = stringprefix + r'"""[^"\\]*((\\.|"(?!""))[^"\\]*)*(""")?'
+    string = any("STRING", [sq3string, dq3string, sqstring, dqstring])
+    prog = re.compile("|".join([
+                                builtin, comment, string, kw,
+                                match_softkw, case_default,
+                                case_softkw_and_pattern,
+                                any("SYNC", [r"\n"]),
+                               ]),
+                      re.DOTALL | re.MULTILINE)
+    return prog
+
+
+prog = make_pat()
+idprog = re.compile(r"\s+(\w+)")
+prog_group_name_to_tag = {
+    "MATCH_SOFTKW": "KEYWORD",
+    "CASE_SOFTKW": "KEYWORD",
+    "CASE_DEFAULT_UNDERSCORE": "KEYWORD",
+    "CASE_SOFTKW2": "KEYWORD",
+}
+
+
+def matched_named_groups(re_match):
+    "Get only the non-empty named groups from an re.Match object."
+    return ((k, v) for (k, v) in re_match.groupdict().items() if v)
+
+
+def color_config(text):
+    """Set color options of Text widget.
+
+    If ColorDelegator is used, this should be called first.
+    """
+    # Called from htest, TextFrame, Editor, and Turtledemo.
+    # Not automatic because ColorDelegator does not know 'text'.
+    theme = idleConf.CurrentTheme()
+    normal_colors = idleConf.GetHighlight(theme, 'normal')
+    cursor_color = idleConf.GetHighlight(theme, 'cursor')['foreground']
+    select_colors = idleConf.GetHighlight(theme, 'hilite')
+    text.config(
+        foreground=normal_colors['foreground'],
+        background=normal_colors['background'],
+        insertbackground=cursor_color,
+        selectforeground=select_colors['foreground'],
+        selectbackground=select_colors['background'],
+        inactiveselectbackground=select_colors['background'],  # new in 8.5
+        )
+
+
+class ColorDelegator(Delegator):
+    """Delegator for syntax highlighting (text coloring).
+
+    Instance variables:
+        delegate: Delegator below this one in the stack, meaning the
+                one this one delegates to.
+
+        Used to track state:
+        after_id: Identifier for scheduled after event, which is a
+                timer for colorizing the text.
+        allow_colorizing: Boolean toggle for applying colorizing.
+        colorizing: Boolean flag when colorizing is in process.
+        stop_colorizing: Boolean flag to end an active colorizing
+                process.
+    """
+
+    def __init__(self):
+        Delegator.__init__(self)
+        self.init_state()
+        self.prog = prog
+        self.idprog = idprog
+        self.LoadTagDefs()
+
+    def init_state(self):
+        "Initialize variables that track colorizing state."
+        self.after_id = None
+        self.allow_colorizing = True
+        self.stop_colorizing = False
+        self.colorizing = False
+
+    def setdelegate(self, delegate):
+        """Set the delegate for this instance.
+
+        A delegate is an instance of a Delegator class and each
+        delegate points to the next delegator in the stack.  This
+        allows multiple delegators to be chained together for a
+        widget.  The bottom delegate for a colorizer is a Text
+        widget.
+
+        If there is a delegate, also start the colorizing process.
+        """
+        if self.delegate is not None:
+            self.unbind("<<toggle-auto-coloring>>")
+        Delegator.setdelegate(self, delegate)
+        if delegate is not None:
+            self.config_colors()
+            self.bind("<<toggle-auto-coloring>>", self.toggle_colorize_event)
+            self.notify_range("1.0", "end")
+        else:
+            # No delegate - stop any colorizing.
+            self.stop_colorizing = True
+            self.allow_colorizing = False
+
+    def config_colors(self):
+        "Configure text widget tags with colors from tagdefs."
+        for tag, cnf in self.tagdefs.items():
+            self.tag_configure(tag, **cnf)
+        self.tag_raise('sel')
+
+    def LoadTagDefs(self):
+        "Create dictionary of tag names to text colors."
+        theme = idleConf.CurrentTheme()
+        self.tagdefs = {
+            "COMMENT": idleConf.GetHighlight(theme, "comment"),
+            "KEYWORD": idleConf.GetHighlight(theme, "keyword"),
+            "BUILTIN": idleConf.GetHighlight(theme, "builtin"),
+            "STRING": idleConf.GetHighlight(theme, "string"),
+            "DEFINITION": idleConf.GetHighlight(theme, "definition"),
+            "SYNC": {'background': None, 'foreground': None},
+            "TODO": {'background': None, 'foreground': None},
+            "ERROR": idleConf.GetHighlight(theme, "error"),
+            # "hit" is used by ReplaceDialog to mark matches. It shouldn't be changed by Colorizer, but
+            # that currently isn't technically possible. This should be moved elsewhere in the future
+            # when fixing the "hit" tag's visibility, or when the replace dialog is replaced with a
+            # non-modal alternative.
+            "hit": idleConf.GetHighlight(theme, "hit"),
+            }
+        if DEBUG: print('tagdefs', self.tagdefs)
+
+    def insert(self, index, chars, tags=None):
+        "Insert chars into widget at index and mark for colorizing."
+        index = self.index(index)
+        self.delegate.insert(index, chars, tags)
+        self.notify_range(index, index + "+%dc" % len(chars))
+
+    def delete(self, index1, index2=None):
+        "Delete chars between indexes and mark for colorizing."
+        index1 = self.index(index1)
+        self.delegate.delete(index1, index2)
+        self.notify_range(index1)
+
+    def notify_range(self, index1, index2=None):
+        "Mark text changes for processing and restart colorizing, if active."
+        self.tag_add("TODO", index1, index2)
+        if self.after_id:
+            if DEBUG: print("colorizing already scheduled")
+            return
+        if self.colorizing:
+            self.stop_colorizing = True
+            if DEBUG: print("stop colorizing")
+        if self.allow_colorizing:
+            if DEBUG: print("schedule colorizing")
+            self.after_id = self.after(1, self.recolorize)
+        return
+
+    def close(self):
+        if self.after_id:
+            after_id = self.after_id
+            self.after_id = None
+            if DEBUG: print("cancel scheduled recolorizer")
+            self.after_cancel(after_id)
+        self.allow_colorizing = False
+        self.stop_colorizing = True
+
+    def toggle_colorize_event(self, event=None):
+        """Toggle colorizing on and off.
+
+        When toggling off, if colorizing is scheduled or is in
+        process, it will be cancelled and/or stopped.
+
+        When toggling on, colorizing will be scheduled.
+        """
+        if self.after_id:
+            after_id = self.after_id
+            self.after_id = None
+            if DEBUG: print("cancel scheduled recolorizer")
+            self.after_cancel(after_id)
+        if self.allow_colorizing and self.colorizing:
+            if DEBUG: print("stop colorizing")
+            self.stop_colorizing = True
+        self.allow_colorizing = not self.allow_colorizing
+        if self.allow_colorizing and not self.colorizing:
+            self.after_id = self.after(1, self.recolorize)
+        if DEBUG:
+            print("auto colorizing turned",
+                  "on" if self.allow_colorizing else "off")
+        return "break"
+
+    def recolorize(self):
+        """Timer event (every 1ms) to colorize text.
+
+        Colorizing is only attempted when the text widget exists,
+        when colorizing is toggled on, and when the colorizing
+        process is not already running.
+
+        After colorizing is complete, some cleanup is done to
+        make sure that all the text has been colorized.
+        """
+        self.after_id = None
+        if not self.delegate:
+            if DEBUG: print("no delegate")
+            return
+        if not self.allow_colorizing:
+            if DEBUG: print("auto colorizing is off")
+            return
+        if self.colorizing:
+            if DEBUG: print("already colorizing")
+            return
+        try:
+            self.stop_colorizing = False
+            self.colorizing = True
+            if DEBUG: print("colorizing...")
+            t0 = time.perf_counter()
+            self.recolorize_main()
+            t1 = time.perf_counter()
+            if DEBUG: print("%.3f seconds" % (t1-t0))
+        finally:
+            self.colorizing = False
+        if self.allow_colorizing and self.tag_nextrange("TODO", "1.0"):
+            if DEBUG: print("reschedule colorizing")
+            self.after_id = self.after(1, self.recolorize)
+
+    def recolorize_main(self):
+        "Evaluate text and apply colorizing tags."
+        next = "1.0"
+        while todo_tag_range := self.tag_nextrange("TODO", next):
+            self.tag_remove("SYNC", todo_tag_range[0], todo_tag_range[1])
+            sync_tag_range = self.tag_prevrange("SYNC", todo_tag_range[0])
+            head = sync_tag_range[1] if sync_tag_range else "1.0"
+
+            chars = ""
+            next = head
+            lines_to_get = 1
+            ok = False
+            while not ok:
+                mark = next
+                next = self.index(mark + "+%d lines linestart" %
+                                         lines_to_get)
+                lines_to_get = min(lines_to_get * 2, 100)
+                ok = "SYNC" in self.tag_names(next + "-1c")
+                line = self.get(mark, next)
+                ##print head, "get", mark, next, "->", repr(line)
+                if not line:
+                    return
+                for tag in self.tagdefs:
+                    self.tag_remove(tag, mark, next)
+                chars += line
+                self._add_tags_in_section(chars, head)
+                if "SYNC" in self.tag_names(next + "-1c"):
+                    head = next
+                    chars = ""
+                else:
+                    ok = False
+                if not ok:
+                    # We're in an inconsistent state, and the call to
+                    # update may tell us to stop.  It may also change
+                    # the correct value for "next" (since this is a
+                    # line.col string, not a true mark).  So leave a
+                    # crumb telling the next invocation to resume here
+                    # in case update tells us to leave.
+                    self.tag_add("TODO", next)
+                self.update_idletasks()
+                if self.stop_colorizing:
+                    if DEBUG: print("colorizing stopped")
+                    return
+
+    def _add_tag(self, start, end, head, matched_group_name):
+        """Add a tag to a given range in the text widget.
+
+        This is a utility function, receiving the range as `start` and
+        `end` positions, each of which is a number of characters
+        relative to the given `head` index in the text widget.
+
+        The tag to add is determined by `matched_group_name`, which is
+        the name of a regular expression "named group" as matched by
+        by the relevant highlighting regexps.
+        """
+        tag = prog_group_name_to_tag.get(matched_group_name,
+                                         matched_group_name)
+        self.tag_add(tag,
+                     f"{head}+{start:d}c",
+                     f"{head}+{end:d}c")
+
+    def _add_tags_in_section(self, chars, head):
+        """Parse and add highlighting tags to a given part of the text.
+
+        `chars` is a string with the text to parse and to which
+        highlighting is to be applied.
+
+            `head` is the index in the text widget where the text is found.
+        """
+        for m in self.prog.finditer(chars):
+            for name, matched_text in matched_named_groups(m):
+                a, b = m.span(name)
+                self._add_tag(a, b, head, name)
+                if matched_text in ("def", "class"):
+                    if m1 := self.idprog.match(chars, b):
+                        a, b = m1.span(1)
+                        self._add_tag(a, b, head, "DEFINITION")
+
+    def removecolors(self):
+        "Remove all colorizing tags."
+        for tag in self.tagdefs:
+            self.tag_remove(tag, "1.0", "end")
+
+
+def _color_delegator(parent):  # htest #
+    from tkinter import Toplevel, Text
+    from idlelib.idle_test.test_colorizer import source
+    from idlelib.percolator import Percolator
+
+    top = Toplevel(parent)
+    top.title("Test ColorDelegator")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("700x550+%d+%d" % (x + 20, y + 175))
+
+    text = Text(top, background="white")
+    text.pack(expand=1, fill="both")
+    text.insert("insert", source)
+    text.focus_set()
+
+    color_config(text)
+    p = Percolator(text)
+    d = ColorDelegator()
+    p.insertfilter(d)
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_colorizer', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_color_delegator)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-extensions.def b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-extensions.def
new file mode 100644
index 0000000000000000000000000000000000000000..7e23fb0a73d1d540c92b7a43715f0041a581ef1d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-extensions.def
@@ -0,0 +1,62 @@
+# config-extensions.def
+#
+# The following sections are for features that are no longer extensions.
+# Their options values are left here for back-compatibility.
+
+[AutoComplete]
+popupwait= 2000
+
+[CodeContext]
+maxlines= 15
+
+[FormatParagraph]
+max-width= 72
+
+[ParenMatch]
+style= expression
+flash-delay= 500
+bell= True
+
+# IDLE reads several config files to determine user preferences.  This
+# file is the default configuration file for IDLE extensions settings.
+#
+# Each extension must have at least one section, named after the
+# extension module. This section must contain an 'enable' item (=True to
+# enable the extension, =False to disable it), it may contain
+# 'enable_editor' or 'enable_shell' items, to apply it only to editor ir
+# shell windows, and may also contain any other general configuration
+# items for the extension.  Other True/False values will also be
+# recognized as boolean by the Extension Configuration dialog.
+#
+# Each extension must define at least one section named
+# ExtensionName_bindings or ExtensionName_cfgBindings. If present,
+# ExtensionName_bindings defines virtual event bindings for the
+# extension that are not user re-configurable. If present,
+# ExtensionName_cfgBindings defines virtual event bindings for the
+# extension that may be sensibly re-configured.
+#
+# If there are no keybindings for a menus' virtual events, include lines
+# like <<toggle-code-context>>=.
+#
+# Currently it is necessary to manually modify this file to change
+# extension key bindings and default values. To customize, create
+# ~/.idlerc/config-extensions.cfg and append the appropriate customized
+# section(s).  Those sections will override the defaults in this file.
+#
+# Note: If a keybinding is already in use when the extension is loaded,
+# the extension's virtual event's keybinding will be set to ''.
+#
+# See config-keys.def for notes on specifying keys and extend.txt for
+# information on creating IDLE extensions.
+
+# A fake extension for testing and example purposes.  When enabled and
+# invoked, inserts or deletes z-text at beginning of every line.
+[ZzDummy]
+enable= False
+enable_shell = False
+enable_editor = True
+z-text= Z
+[ZzDummy_cfgBindings]
+z-in= <Control-Shift-KeyRelease-Insert>
+[ZzDummy_bindings]
+z-out= <Control-Shift-KeyRelease-Delete>
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-highlight.def b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-highlight.def
new file mode 100644
index 0000000000000000000000000000000000000000..a7b0433831c533c28e2a3f6d8b3ee3bbb44bad43
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-highlight.def
@@ -0,0 +1,105 @@
+# IDLE reads several config files to determine user preferences.  This
+# file is the default config file for idle highlight theme settings.
+
+[IDLE Classic]
+normal-foreground= #000000
+normal-background= #ffffff
+keyword-foreground= #ff7700
+keyword-background= #ffffff
+builtin-foreground= #900090
+builtin-background= #ffffff
+comment-foreground= #dd0000
+comment-background= #ffffff
+string-foreground= #00aa00
+string-background= #ffffff
+definition-foreground= #0000ff
+definition-background= #ffffff
+hilite-foreground= #000000
+hilite-background= gray
+break-foreground= black
+break-background= #ffff55
+hit-foreground= #ffffff
+hit-background= #000000
+error-foreground= #000000
+error-background= #ff7777
+context-foreground= #000000
+context-background= lightgray
+linenumber-foreground= gray
+linenumber-background= #ffffff
+#cursor (only foreground can be set, restart IDLE)
+cursor-foreground= black
+#shell window
+stdout-foreground= blue
+stdout-background= #ffffff
+stderr-foreground= red
+stderr-background= #ffffff
+console-foreground= #770000
+console-background= #ffffff
+
+[IDLE New]
+normal-foreground= #000000
+normal-background= #ffffff
+keyword-foreground= #ff7700
+keyword-background= #ffffff
+builtin-foreground= #900090
+builtin-background= #ffffff
+comment-foreground= #dd0000
+comment-background= #ffffff
+string-foreground= #00aa00
+string-background= #ffffff
+definition-foreground= #0000ff
+definition-background= #ffffff
+hilite-foreground= #000000
+hilite-background= gray
+break-foreground= black
+break-background= #ffff55
+hit-foreground= #ffffff
+hit-background= #000000
+error-foreground= #000000
+error-background= #ff7777
+context-foreground= #000000
+context-background= lightgray
+linenumber-foreground= gray
+linenumber-background= #ffffff
+#cursor (only foreground can be set, restart IDLE)
+cursor-foreground= black
+#shell window
+stdout-foreground= blue
+stdout-background= #ffffff
+stderr-foreground= red
+stderr-background= #ffffff
+console-foreground= #770000
+console-background= #ffffff
+
+[IDLE Dark]
+comment-foreground = #dd0000
+console-foreground = #ff4d4d
+error-foreground = #FFFFFF
+hilite-background = #7e7e7e
+string-foreground = #02ff02
+stderr-background = #002240
+stderr-foreground = #ffb3b3
+console-background = #002240
+hit-background = #fbfbfb
+string-background = #002240
+normal-background = #002240
+hilite-foreground = #FFFFFF
+keyword-foreground = #ff8000
+error-background = #c86464
+keyword-background = #002240
+builtin-background = #002240
+break-background = #808000
+builtin-foreground = #ff00ff
+definition-foreground = #5e5eff
+stdout-foreground = #c2d1fa
+definition-background = #002240
+normal-foreground = #FFFFFF
+cursor-foreground = #ffffff
+stdout-background = #002240
+hit-foreground = #002240
+comment-background = #002240
+break-foreground = #FFFFFF
+context-foreground= #ffffff
+context-background= #454545
+linenumber-foreground= gray
+linenumber-background= #002240
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-keys.def b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-keys.def
new file mode 100644
index 0000000000000000000000000000000000000000..f71269b5b49f461042065f071e49f16c947b937a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-keys.def
@@ -0,0 +1,309 @@
+# IDLE reads several config files to determine user preferences.  This
+# file is the default config file for idle key binding settings.
+# Where multiple keys are specified for an action: if they are separated
+# by a space (eg. action=<key1> <key2>) then the keys are alternatives, if
+# there is no space (eg. action=<key1><key2>) then the keys comprise a
+# single 'emacs style' multi-keystoke binding. The tk event specifier 'Key'
+# is used in all cases, for consistency in auto key conflict checking in the
+# configuration gui.
+
+[IDLE Classic Windows]
+copy=<Control-Key-c> <Control-Key-C>
+cut=<Control-Key-x> <Control-Key-X>
+paste=<Control-Key-v> <Control-Key-V>
+beginning-of-line= <Key-Home>
+center-insert=<Control-Key-l> <Control-Key-L>
+close-all-windows=<Control-Key-q> <Control-Key-Q>
+close-window=<Alt-Key-F4> <Meta-Key-F4>
+do-nothing=<Control-Key-F12>
+end-of-file=<Control-Key-d> <Control-Key-D>
+python-docs=<Key-F1>
+python-context-help=<Shift-Key-F1>
+history-next=<Alt-Key-n> <Meta-Key-n> <Alt-Key-N> <Meta-Key-N>
+history-previous=<Alt-Key-p> <Meta-Key-p> <Alt-Key-P> <Meta-Key-P>
+interrupt-execution=<Control-Key-c> <Control-Key-C>
+view-restart=<Key-F6>
+restart-shell=<Control-Key-F6>
+open-class-browser=<Alt-Key-c> <Meta-Key-c> <Alt-Key-C> <Meta-Key-C>
+open-module=<Alt-Key-m> <Meta-Key-m> <Alt-Key-M> <Meta-Key-M>
+open-new-window=<Control-Key-n> <Control-Key-N>
+open-window-from-file=<Control-Key-o> <Control-Key-O>
+plain-newline-and-indent=<Control-Key-j> <Control-Key-J>
+print-window=<Control-Key-p> <Control-Key-P>
+redo=<Control-Shift-Key-Z> <Control-Shift-Key-z>
+remove-selection=<Key-Escape>
+save-copy-of-window-as-file=<Alt-Shift-Key-S> <Alt-Shift-Key-s>
+save-window-as-file=<Control-Shift-Key-S> <Control-Shift-Key-s>
+save-window=<Control-Key-s> <Control-Key-S>
+select-all=<Control-Key-a> <Control-Key-A>
+toggle-auto-coloring=<Control-Key-slash>
+undo=<Control-Key-z> <Control-Key-Z>
+find=<Control-Key-f> <Control-Key-F>
+find-again=<Control-Key-g> <Key-F3> <Control-Key-G>
+find-in-files=<Alt-Key-F3> <Meta-Key-F3>
+find-selection=<Control-Key-F3>
+replace=<Control-Key-h> <Control-Key-H>
+goto-line=<Alt-Key-g> <Meta-Key-g> <Alt-Key-G> <Meta-Key-G>
+smart-backspace=<Key-BackSpace>
+newline-and-indent=<Key-Return> <Key-KP_Enter>
+smart-indent=<Key-Tab>
+indent-region=<Control-Key-bracketright>
+dedent-region=<Control-Key-bracketleft>
+comment-region=<Alt-Key-3> <Meta-Key-3>
+uncomment-region=<Alt-Key-4> <Meta-Key-4>
+tabify-region=<Alt-Key-5> <Meta-Key-5>
+untabify-region=<Alt-Key-6> <Meta-Key-6>
+toggle-tabs=<Alt-Key-t> <Meta-Key-t> <Alt-Key-T> <Meta-Key-T>
+change-indentwidth=<Alt-Key-u> <Meta-Key-u> <Alt-Key-U> <Meta-Key-U>
+del-word-left=<Control-Key-BackSpace>
+del-word-right=<Control-Key-Delete>
+force-open-completions= <Control-Key-space>
+expand-word= <Alt-Key-slash>
+force-open-calltip= <Control-Key-backslash>
+format-paragraph= <Alt-Key-q>
+flash-paren= <Control-Key-0>
+run-module= <Key-F5>
+run-custom= <Shift-Key-F5>
+check-module= <Alt-Key-x>
+zoom-height= <Alt-Key-2>
+
+[IDLE Classic Unix]
+copy=<Alt-Key-w> <Meta-Key-w>
+cut=<Control-Key-w>
+paste=<Control-Key-y>
+beginning-of-line=<Control-Key-a> <Key-Home>
+center-insert=<Control-Key-l>
+close-all-windows=<Control-Key-x><Control-Key-c>
+close-window=<Control-Key-x><Control-Key-0>
+do-nothing=<Control-Key-x>
+end-of-file=<Control-Key-d>
+history-next=<Alt-Key-n> <Meta-Key-n>
+history-previous=<Alt-Key-p> <Meta-Key-p>
+interrupt-execution=<Control-Key-c>
+view-restart=<Key-F6>
+restart-shell=<Control-Key-F6>
+open-class-browser=<Control-Key-x><Control-Key-b>
+open-module=<Control-Key-x><Control-Key-m>
+open-new-window=<Control-Key-x><Control-Key-n>
+open-window-from-file=<Control-Key-x><Control-Key-f>
+plain-newline-and-indent=<Control-Key-j>
+print-window=<Control-x><Control-Key-p>
+python-docs=<Control-Key-h>
+python-context-help=<Control-Shift-Key-H>
+redo=<Alt-Key-z> <Meta-Key-z>
+remove-selection=<Key-Escape>
+save-copy-of-window-as-file=<Control-Key-x><Control-Key-y>
+save-window-as-file=<Control-Key-x><Control-Key-w>
+save-window=<Control-Key-x><Control-Key-s>
+select-all=<Alt-Key-a> <Meta-Key-a>
+toggle-auto-coloring=<Control-Key-slash>
+undo=<Control-Key-z>
+find=<Control-Key-u><Control-Key-u><Control-Key-s>
+find-again=<Control-Key-u><Control-Key-s>
+find-in-files=<Alt-Key-s> <Meta-Key-s>
+find-selection=<Control-Key-s>
+replace=<Control-Key-r>
+goto-line=<Alt-Key-g> <Meta-Key-g>
+smart-backspace=<Key-BackSpace>
+newline-and-indent=<Key-Return> <Key-KP_Enter>
+smart-indent=<Key-Tab>
+indent-region=<Control-Key-bracketright>
+dedent-region=<Control-Key-bracketleft>
+comment-region=<Alt-Key-3>
+uncomment-region=<Alt-Key-4>
+tabify-region=<Alt-Key-5>
+untabify-region=<Alt-Key-6>
+toggle-tabs=<Alt-Key-t>
+change-indentwidth=<Alt-Key-u>
+del-word-left=<Alt-Key-BackSpace>
+del-word-right=<Alt-Key-d>
+force-open-completions= <Control-Key-space>
+expand-word= <Alt-Key-slash>
+force-open-calltip= <Control-Key-backslash>
+format-paragraph= <Alt-Key-q>
+flash-paren= <Control-Key-0>
+run-module= <Key-F5>
+run-custom= <Shift-Key-F5>
+check-module= <Alt-Key-x>
+zoom-height= <Alt-Key-2>
+
+[IDLE Modern Unix]
+copy = <Control-Shift-Key-C> <Control-Key-Insert>
+cut = <Control-Key-x> <Shift-Key-Delete>
+paste = <Control-Key-v> <Shift-Key-Insert>
+beginning-of-line = <Key-Home>
+center-insert = <Control-Key-l>
+close-all-windows = <Control-Key-q>
+close-window = <Control-Key-w> <Control-Shift-Key-W>
+do-nothing = <Control-Key-F12>
+end-of-file = <Control-Key-d>
+history-next = <Alt-Key-n> <Meta-Key-n>
+history-previous = <Alt-Key-p> <Meta-Key-p>
+interrupt-execution = <Control-Key-c>
+view-restart = <Key-F6>
+restart-shell = <Control-Key-F6>
+open-class-browser = <Control-Key-b>
+open-module = <Control-Key-m>
+open-new-window = <Control-Key-n>
+open-window-from-file = <Control-Key-o>
+plain-newline-and-indent = <Control-Key-j>
+print-window = <Control-Key-p>
+python-context-help = <Shift-Key-F1>
+python-docs = <Key-F1>
+redo = <Control-Shift-Key-Z>
+remove-selection = <Key-Escape>
+save-copy-of-window-as-file = <Alt-Shift-Key-S>
+save-window-as-file = <Control-Shift-Key-S>
+save-window = <Control-Key-s>
+select-all = <Control-Key-a>
+toggle-auto-coloring = <Control-Key-slash>
+undo = <Control-Key-z>
+find = <Control-Key-f>
+find-again = <Key-F3>
+find-in-files = <Control-Shift-Key-f>
+find-selection = <Control-Key-h>
+replace = <Control-Key-r>
+goto-line = <Control-Key-g>
+smart-backspace = <Key-BackSpace>
+newline-and-indent = <Key-Return> <Key-KP_Enter>
+smart-indent = <Key-Tab>
+indent-region = <Control-Key-bracketright>
+dedent-region = <Control-Key-bracketleft>
+comment-region = <Control-Key-d>
+uncomment-region = <Control-Shift-Key-D>
+tabify-region = <Alt-Key-5>
+untabify-region = <Alt-Key-6>
+toggle-tabs = <Control-Key-T>
+change-indentwidth = <Alt-Key-u>
+del-word-left = <Control-Key-BackSpace>
+del-word-right = <Control-Key-Delete>
+force-open-completions= <Control-Key-space>
+expand-word= <Alt-Key-slash>
+force-open-calltip= <Control-Key-backslash>
+format-paragraph= <Alt-Key-q>
+flash-paren= <Control-Key-0>
+run-module= <Key-F5>
+run-custom= <Shift-Key-F5>
+check-module= <Alt-Key-x>
+zoom-height= <Alt-Key-2>
+
+[IDLE Classic Mac]
+copy=<Command-Key-c>
+cut=<Command-Key-x>
+paste=<Command-Key-v>
+beginning-of-line= <Key-Home>
+center-insert=<Control-Key-l>
+close-all-windows=<Command-Key-q>
+close-window=<Command-Key-w>
+do-nothing=<Control-Key-F12>
+end-of-file=<Control-Key-d>
+python-docs=<Key-F1>
+python-context-help=<Shift-Key-F1>
+history-next=<Control-Key-n>
+history-previous=<Control-Key-p>
+interrupt-execution=<Control-Key-c>
+view-restart=<Key-F6>
+restart-shell=<Control-Key-F6>
+open-class-browser=<Command-Key-b>
+open-module=<Command-Key-m>
+open-new-window=<Command-Key-n>
+open-window-from-file=<Command-Key-o>
+plain-newline-and-indent=<Control-Key-j>
+print-window=<Command-Key-p>
+redo=<Shift-Command-Key-Z>
+remove-selection=<Key-Escape>
+save-window-as-file=<Shift-Command-Key-S>
+save-window=<Command-Key-s>
+save-copy-of-window-as-file=<Option-Command-Key-s>
+select-all=<Command-Key-a>
+toggle-auto-coloring=<Control-Key-slash>
+undo=<Command-Key-z>
+find=<Command-Key-f>
+find-again=<Command-Key-g> <Key-F3>
+find-in-files=<Command-Key-F3>
+find-selection=<Shift-Command-Key-F3>
+replace=<Command-Key-r>
+goto-line=<Command-Key-j>
+smart-backspace=<Key-BackSpace>
+newline-and-indent=<Key-Return> <Key-KP_Enter>
+smart-indent=<Key-Tab>
+indent-region=<Command-Key-bracketright>
+dedent-region=<Command-Key-bracketleft>
+comment-region=<Control-Key-3>
+uncomment-region=<Control-Key-4>
+tabify-region=<Control-Key-5>
+untabify-region=<Control-Key-6>
+toggle-tabs=<Control-Key-t>
+change-indentwidth=<Control-Key-u>
+del-word-left=<Control-Key-BackSpace>
+del-word-right=<Control-Key-Delete>
+force-open-completions= <Control-Key-space>
+expand-word= <Option-Key-slash>
+force-open-calltip= <Control-Key-backslash>
+format-paragraph= <Option-Key-q>
+flash-paren= <Control-Key-0>
+run-module= <Key-F5>
+run-custom= <Shift-Key-F5>
+check-module= <Option-Key-x>
+zoom-height= <Option-Key-0>
+
+[IDLE Classic OSX]
+toggle-tabs = <Control-Key-t>
+interrupt-execution = <Control-Key-c>
+untabify-region = <Control-Key-6>
+remove-selection = <Key-Escape>
+print-window = <Command-Key-p>
+replace = <Command-Key-r>
+goto-line = <Command-Key-j>
+plain-newline-and-indent = <Control-Key-j>
+history-previous = <Control-Key-p>
+beginning-of-line = <Control-Key-Left>
+end-of-line = <Control-Key-Right>
+comment-region = <Control-Key-3>
+redo = <Shift-Command-Key-Z>
+close-window = <Command-Key-w>
+restart-shell = <Control-Key-F6>
+save-window-as-file = <Shift-Command-Key-S>
+close-all-windows = <Command-Key-q>
+view-restart = <Key-F6>
+tabify-region = <Control-Key-5>
+find-again = <Command-Key-g> <Key-F3>
+find = <Command-Key-f>
+toggle-auto-coloring = <Control-Key-slash>
+select-all = <Command-Key-a>
+smart-backspace = <Key-BackSpace>
+change-indentwidth = <Control-Key-u>
+do-nothing = <Control-Key-F12>
+smart-indent = <Key-Tab>
+center-insert = <Control-Key-l>
+history-next = <Control-Key-n>
+del-word-right = <Option-Key-Delete>
+undo = <Command-Key-z>
+save-window = <Command-Key-s>
+uncomment-region = <Control-Key-4>
+cut = <Command-Key-x>
+find-in-files = <Command-Key-F3>
+dedent-region = <Command-Key-bracketleft>
+copy = <Command-Key-c>
+paste = <Command-Key-v>
+indent-region = <Command-Key-bracketright>
+del-word-left = <Option-Key-BackSpace> <Option-Command-Key-BackSpace>
+newline-and-indent = <Key-Return> <Key-KP_Enter>
+end-of-file = <Control-Key-d>
+open-class-browser = <Command-Key-b>
+open-new-window = <Command-Key-n>
+open-module = <Command-Key-m>
+find-selection = <Shift-Command-Key-F3>
+python-context-help = <Shift-Key-F1>
+save-copy-of-window-as-file = <Option-Command-Key-s>
+open-window-from-file = <Command-Key-o>
+python-docs = <Key-F1>
+force-open-completions= <Control-Key-space>
+expand-word= <Option-Key-slash>
+force-open-calltip= <Control-Key-backslash>
+format-paragraph= <Option-Key-q>
+flash-paren= <Control-Key-0>
+run-module= <Key-F5>
+run-custom= <Shift-Key-F5>
+check-module= <Option-Key-x>
+zoom-height= <Option-Key-0>
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-main.def b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-main.def
new file mode 100644
index 0000000000000000000000000000000000000000..54bdce34af31e082bbe88781a394d780b22d26a5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config-main.def
@@ -0,0 +1,92 @@
+# IDLE reads several config files to determine user preferences.  This
+# file is the default config file for general idle settings.
+#
+# When IDLE starts, it will look in
+# the following two sets of files, in order:
+#
+#     default configuration files in idlelib
+#     --------------------------------------
+#     config-main.def         default general config file
+#     config-extensions.def   default extension config file
+#     config-highlight.def    default highlighting config file
+#     config-keys.def         default keybinding config file
+#
+#     user configuration files in ~/.idlerc
+#     -------------------------------------
+#     config-main.cfg         user general config file
+#     config-extensions.cfg   user extension config file
+#     config-highlight.cfg    user highlighting config file
+#     config-keys.cfg         user keybinding config file
+#
+# On Windows, the default location of the home directory ('~' above)
+# depends on the version.  For Windows 10, it is C:\Users\<username>.
+#
+# Any options the user saves through the config dialog will be saved to
+# the relevant user config file. Reverting any general or extension
+# setting to the default causes that entry to be wiped from the user
+# file and re-read from the default file.  This rule applies to each
+# item, except that the three editor font items are saved as a group.
+#
+# User highlighting themes and keybinding sets must have (section) names
+# distinct from the default names.  All items are added and saved as a
+# group. They are retained unless specifically deleted within the config
+# dialog. Choosing one of the default themes or keysets just applies the
+# relevant settings from the default file.
+#
+# Additional help sources are listed in the [HelpFiles] section below
+# and should be viewable by a web browser. These sources will be listed
+# on the Help menu.  The pattern, and two examples, are:
+#
+# <sequence_number = menu item;/path/to/help/source>
+# 1 = IDLE;C:/Programs/Python36/Lib/idlelib/help.html
+# 2 = Pillow;https://pillow.readthedocs.io/en/latest/
+#
+# You can't use a semi-colon in a menu item or path.  The path will be
+# platform specific because of path separators, drive specs etc.
+#
+# The default files should not be edited except to add new sections to
+# config-extensions.def for added extensions.  The user files should be
+# modified through the Settings dialog.
+
+[General]
+editor-on-startup= 0
+autosave= 0
+print-command-posix=lpr %%s
+print-command-win=start /min notepad /p %%s
+delete-exitfunc= 1
+
+[EditorWindow]
+width= 80
+height= 40
+cursor-blink= 1
+font= TkFixedFont
+# For TkFixedFont, the actual size and boldness are obtained from tk
+# and override 10 and 0.  See idlelib.config.IdleConf.GetFont
+font-size= 10
+font-bold= 0
+encoding= none
+line-numbers-default= 0
+
+[PyShell]
+auto-squeeze-min-lines= 50
+
+[Indent]
+use-spaces= 1
+num-spaces= 4
+
+[Theme]
+default= 1
+name= IDLE Classic
+name2=
+# name2 set in user config-main.cfg for themes added after 2015 Oct 1
+
+[Keys]
+default= 1
+name=
+name2=
+# name2 set in user config-main.cfg for keys added after 2016 July 1
+
+[History]
+cyclic=1
+
+[HelpFiles]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config.py
new file mode 100644
index 0000000000000000000000000000000000000000..d10c88a43f9231d30927f1ed49512d1c401874f5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config.py
@@ -0,0 +1,917 @@
+"""idlelib.config -- Manage IDLE configuration information.
+
+The comments at the beginning of config-main.def describe the
+configuration files and the design implemented to update user
+configuration information.  In particular, user configuration choices
+which duplicate the defaults will be removed from the user's
+configuration files, and if a user file becomes empty, it will be
+deleted.
+
+The configuration database maps options to values.  Conceptually, the
+database keys are tuples (config-type, section, item).  As implemented,
+there are  separate dicts for default and user values.  Each has
+config-type keys 'main', 'extensions', 'highlight', and 'keys'.  The
+value for each key is a ConfigParser instance that maps section and item
+to values.  For 'main' and 'extensions', user values override
+default values.  For 'highlight' and 'keys', user sections augment the
+default sections (and must, therefore, have distinct names).
+
+Throughout this module there is an emphasis on returning usable defaults
+when a problem occurs in returning a requested configuration value back to
+idle. This is to allow IDLE to continue to function in spite of errors in
+the retrieval of config information. When a default is returned instead of
+a requested config value, a message is printed to stderr to aid in
+configuration problem notification and resolution.
+"""
+# TODOs added Oct 2014, tjr
+
+from configparser import ConfigParser
+import os
+import sys
+
+from tkinter.font import Font
+import idlelib
+
+class InvalidConfigType(Exception): pass
+class InvalidConfigSet(Exception): pass
+class InvalidTheme(Exception): pass
+
+class IdleConfParser(ConfigParser):
+    """
+    A ConfigParser specialised for idle configuration file handling
+    """
+    def __init__(self, cfgFile, cfgDefaults=None):
+        """
+        cfgFile - string, fully specified configuration file name
+        """
+        self.file = cfgFile  # This is currently '' when testing.
+        ConfigParser.__init__(self, defaults=cfgDefaults, strict=False)
+
+    def Get(self, section, option, type=None, default=None, raw=False):
+        """
+        Get an option value for given section/option or return default.
+        If type is specified, return as type.
+        """
+        # TODO Use default as fallback, at least if not None
+        # Should also print Warning(file, section, option).
+        # Currently may raise ValueError
+        if not self.has_option(section, option):
+            return default
+        if type == 'bool':
+            return self.getboolean(section, option)
+        elif type == 'int':
+            return self.getint(section, option)
+        else:
+            return self.get(section, option, raw=raw)
+
+    def GetOptionList(self, section):
+        "Return a list of options for given section, else []."
+        if self.has_section(section):
+            return self.options(section)
+        else:  #return a default value
+            return []
+
+    def Load(self):
+        "Load the configuration file from disk."
+        if self.file:
+            self.read(self.file)
+
+class IdleUserConfParser(IdleConfParser):
+    """
+    IdleConfigParser specialised for user configuration handling.
+    """
+
+    def SetOption(self, section, option, value):
+        """Return True if option is added or changed to value, else False.
+
+        Add section if required.  False means option already had value.
+        """
+        if self.has_option(section, option):
+            if self.get(section, option) == value:
+                return False
+            else:
+                self.set(section, option, value)
+                return True
+        else:
+            if not self.has_section(section):
+                self.add_section(section)
+            self.set(section, option, value)
+            return True
+
+    def RemoveOption(self, section, option):
+        """Return True if option is removed from section, else False.
+
+        False if either section does not exist or did not have option.
+        """
+        if self.has_section(section):
+            return self.remove_option(section, option)
+        return False
+
+    def AddSection(self, section):
+        "If section doesn't exist, add it."
+        if not self.has_section(section):
+            self.add_section(section)
+
+    def RemoveEmptySections(self):
+        "Remove any sections that have no options."
+        for section in self.sections():
+            if not self.GetOptionList(section):
+                self.remove_section(section)
+
+    def IsEmpty(self):
+        "Return True if no sections after removing empty sections."
+        self.RemoveEmptySections()
+        return not self.sections()
+
+    def Save(self):
+        """Update user configuration file.
+
+        If self not empty after removing empty sections, write the file
+        to disk. Otherwise, remove the file from disk if it exists.
+        """
+        fname = self.file
+        if fname and fname[0] != '#':
+            if not self.IsEmpty():
+                try:
+                    cfgFile = open(fname, 'w')
+                except OSError:
+                    os.unlink(fname)
+                    cfgFile = open(fname, 'w')
+                with cfgFile:
+                    self.write(cfgFile)
+            elif os.path.exists(self.file):
+                os.remove(self.file)
+
+class IdleConf:
+    """Hold config parsers for all idle config files in singleton instance.
+
+    Default config files, self.defaultCfg --
+        for config_type in self.config_types:
+            (idle install dir)/config-{config-type}.def
+
+    User config files, self.userCfg --
+        for config_type in self.config_types:
+        (user home dir)/.idlerc/config-{config-type}.cfg
+    """
+    def __init__(self, _utest=False):
+        self.config_types = ('main', 'highlight', 'keys', 'extensions')
+        self.defaultCfg = {}
+        self.userCfg = {}
+        self.cfg = {}  # TODO use to select userCfg vs defaultCfg
+
+        # See https://bugs.python.org/issue4630#msg356516 for following.
+        # self.blink_off_time = <first editor text>['insertofftime']
+
+        if not _utest:
+            self.CreateConfigHandlers()
+            self.LoadCfgFiles()
+
+    def CreateConfigHandlers(self):
+        "Populate default and user config parser dictionaries."
+        idledir = os.path.dirname(__file__)
+        self.userdir = userdir = '' if idlelib.testing else self.GetUserCfgDir()
+        for cfg_type in self.config_types:
+            self.defaultCfg[cfg_type] = IdleConfParser(
+                os.path.join(idledir, f'config-{cfg_type}.def'))
+            self.userCfg[cfg_type] = IdleUserConfParser(
+                os.path.join(userdir or '#', f'config-{cfg_type}.cfg'))
+
+    def GetUserCfgDir(self):
+        """Return a filesystem directory for storing user config files.
+
+        Creates it if required.
+        """
+        cfgDir = '.idlerc'
+        userDir = os.path.expanduser('~')
+        if userDir != '~': # expanduser() found user home dir
+            if not os.path.exists(userDir):
+                if not idlelib.testing:
+                    warn = ('\n Warning: os.path.expanduser("~") points to\n ' +
+                            userDir + ',\n but the path does not exist.')
+                    try:
+                        print(warn, file=sys.stderr)
+                    except OSError:
+                        pass
+                userDir = '~'
+        if userDir == "~": # still no path to home!
+            # traditionally IDLE has defaulted to os.getcwd(), is this adequate?
+            userDir = os.getcwd()
+        userDir = os.path.join(userDir, cfgDir)
+        if not os.path.exists(userDir):
+            try:
+                os.mkdir(userDir)
+            except OSError:
+                if not idlelib.testing:
+                    warn = ('\n Warning: unable to create user config directory\n' +
+                            userDir + '\n Check path and permissions.\n Exiting!\n')
+                    try:
+                        print(warn, file=sys.stderr)
+                    except OSError:
+                        pass
+                raise SystemExit
+        # TODO continue without userDIr instead of exit
+        return userDir
+
+    def GetOption(self, configType, section, option, default=None, type=None,
+                  warn_on_default=True, raw=False):
+        """Return a value for configType section option, or default.
+
+        If type is not None, return a value of that type.  Also pass raw
+        to the config parser.  First try to return a valid value
+        (including type) from a user configuration. If that fails, try
+        the default configuration. If that fails, return default, with a
+        default of None.
+
+        Warn if either user or default configurations have an invalid value.
+        Warn if default is returned and warn_on_default is True.
+        """
+        try:
+            if self.userCfg[configType].has_option(section, option):
+                return self.userCfg[configType].Get(section, option,
+                                                    type=type, raw=raw)
+        except ValueError:
+            warning = ('\n Warning: config.py - IdleConf.GetOption -\n'
+                       ' invalid %r value for configuration option %r\n'
+                       ' from section %r: %r' %
+                       (type, option, section,
+                       self.userCfg[configType].Get(section, option, raw=raw)))
+            _warn(warning, configType, section, option)
+        try:
+            if self.defaultCfg[configType].has_option(section,option):
+                return self.defaultCfg[configType].Get(
+                        section, option, type=type, raw=raw)
+        except ValueError:
+            pass
+        #returning default, print warning
+        if warn_on_default:
+            warning = ('\n Warning: config.py - IdleConf.GetOption -\n'
+                       ' problem retrieving configuration option %r\n'
+                       ' from section %r.\n'
+                       ' returning default value: %r' %
+                       (option, section, default))
+            _warn(warning, configType, section, option)
+        return default
+
+    def SetOption(self, configType, section, option, value):
+        """Set section option to value in user config file."""
+        self.userCfg[configType].SetOption(section, option, value)
+
+    def GetSectionList(self, configSet, configType):
+        """Return sections for configSet configType configuration.
+
+        configSet must be either 'user' or 'default'
+        configType must be in self.config_types.
+        """
+        if not (configType in self.config_types):
+            raise InvalidConfigType('Invalid configType specified')
+        if configSet == 'user':
+            cfgParser = self.userCfg[configType]
+        elif configSet == 'default':
+            cfgParser=self.defaultCfg[configType]
+        else:
+            raise InvalidConfigSet('Invalid configSet specified')
+        return cfgParser.sections()
+
+    def GetHighlight(self, theme, element):
+        """Return dict of theme element highlight colors.
+
+        The keys are 'foreground' and 'background'.  The values are
+        tkinter color strings for configuring backgrounds and tags.
+        """
+        cfg = ('default' if self.defaultCfg['highlight'].has_section(theme)
+               else 'user')
+        theme_dict = self.GetThemeDict(cfg, theme)
+        fore = theme_dict[element + '-foreground']
+        if element == 'cursor':
+            element = 'normal'
+        back = theme_dict[element + '-background']
+        return {"foreground": fore, "background": back}
+
+    def GetThemeDict(self, type, themeName):
+        """Return {option:value} dict for elements in themeName.
+
+        type - string, 'default' or 'user' theme type
+        themeName - string, theme name
+        Values are loaded over ultimate fallback defaults to guarantee
+        that all theme elements are present in a newly created theme.
+        """
+        if type == 'user':
+            cfgParser = self.userCfg['highlight']
+        elif type == 'default':
+            cfgParser = self.defaultCfg['highlight']
+        else:
+            raise InvalidTheme('Invalid theme type specified')
+        # Provide foreground and background colors for each theme
+        # element (other than cursor) even though some values are not
+        # yet used by idle, to allow for their use in the future.
+        # Default values are generally black and white.
+        # TODO copy theme from a class attribute.
+        theme ={'normal-foreground':'#000000',
+                'normal-background':'#ffffff',
+                'keyword-foreground':'#000000',
+                'keyword-background':'#ffffff',
+                'builtin-foreground':'#000000',
+                'builtin-background':'#ffffff',
+                'comment-foreground':'#000000',
+                'comment-background':'#ffffff',
+                'string-foreground':'#000000',
+                'string-background':'#ffffff',
+                'definition-foreground':'#000000',
+                'definition-background':'#ffffff',
+                'hilite-foreground':'#000000',
+                'hilite-background':'gray',
+                'break-foreground':'#ffffff',
+                'break-background':'#000000',
+                'hit-foreground':'#ffffff',
+                'hit-background':'#000000',
+                'error-foreground':'#ffffff',
+                'error-background':'#000000',
+                'context-foreground':'#000000',
+                'context-background':'#ffffff',
+                'linenumber-foreground':'#000000',
+                'linenumber-background':'#ffffff',
+                #cursor (only foreground can be set)
+                'cursor-foreground':'#000000',
+                #shell window
+                'stdout-foreground':'#000000',
+                'stdout-background':'#ffffff',
+                'stderr-foreground':'#000000',
+                'stderr-background':'#ffffff',
+                'console-foreground':'#000000',
+                'console-background':'#ffffff',
+                }
+        for element in theme:
+            if not (cfgParser.has_option(themeName, element) or
+                    # Skip warning for new elements.
+                    element.startswith(('context-', 'linenumber-'))):
+                # Print warning that will return a default color
+                warning = ('\n Warning: config.IdleConf.GetThemeDict'
+                           ' -\n problem retrieving theme element %r'
+                           '\n from theme %r.\n'
+                           ' returning default color: %r' %
+                           (element, themeName, theme[element]))
+                _warn(warning, 'highlight', themeName, element)
+            theme[element] = cfgParser.Get(
+                    themeName, element, default=theme[element])
+        return theme
+
+    def CurrentTheme(self):
+        "Return the name of the currently active text color theme."
+        return self.current_colors_and_keys('Theme')
+
+    def CurrentKeys(self):
+        """Return the name of the currently active key set."""
+        return self.current_colors_and_keys('Keys')
+
+    def current_colors_and_keys(self, section):
+        """Return the currently active name for Theme or Keys section.
+
+        idlelib.config-main.def ('default') includes these sections
+
+        [Theme]
+        default= 1
+        name= IDLE Classic
+        name2=
+
+        [Keys]
+        default= 1
+        name=
+        name2=
+
+        Item 'name2', is used for built-in ('default') themes and keys
+        added after 2015 Oct 1 and 2016 July 1.  This kludge is needed
+        because setting 'name' to a builtin not defined in older IDLEs
+        to display multiple error messages or quit.
+        See https://bugs.python.org/issue25313.
+        When default = True, 'name2' takes precedence over 'name',
+        while older IDLEs will just use name.  When default = False,
+        'name2' may still be set, but it is ignored.
+        """
+        cfgname = 'highlight' if section == 'Theme' else 'keys'
+        default = self.GetOption('main', section, 'default',
+                                 type='bool', default=True)
+        name = ''
+        if default:
+            name = self.GetOption('main', section, 'name2', default='')
+        if not name:
+            name = self.GetOption('main', section, 'name', default='')
+        if name:
+            source = self.defaultCfg if default else self.userCfg
+            if source[cfgname].has_section(name):
+                return name
+        return "IDLE Classic" if section == 'Theme' else self.default_keys()
+
+    @staticmethod
+    def default_keys():
+        if sys.platform[:3] == 'win':
+            return 'IDLE Classic Windows'
+        elif sys.platform == 'darwin':
+            return 'IDLE Classic OSX'
+        else:
+            return 'IDLE Modern Unix'
+
+    def GetExtensions(self, active_only=True,
+                      editor_only=False, shell_only=False):
+        """Return extensions in default and user config-extensions files.
+
+        If active_only True, only return active (enabled) extensions
+        and optionally only editor or shell extensions.
+        If active_only False, return all extensions.
+        """
+        extns = self.RemoveKeyBindNames(
+                self.GetSectionList('default', 'extensions'))
+        userExtns = self.RemoveKeyBindNames(
+                self.GetSectionList('user', 'extensions'))
+        for extn in userExtns:
+            if extn not in extns: #user has added own extension
+                extns.append(extn)
+        for extn in ('AutoComplete','CodeContext',
+                     'FormatParagraph','ParenMatch'):
+            extns.remove(extn)
+            # specific exclusions because we are storing config for mainlined old
+            # extensions in config-extensions.def for backward compatibility
+        if active_only:
+            activeExtns = []
+            for extn in extns:
+                if self.GetOption('extensions', extn, 'enable', default=True,
+                                  type='bool'):
+                    #the extension is enabled
+                    if editor_only or shell_only:  # TODO both True contradict
+                        if editor_only:
+                            option = "enable_editor"
+                        else:
+                            option = "enable_shell"
+                        if self.GetOption('extensions', extn,option,
+                                          default=True, type='bool',
+                                          warn_on_default=False):
+                            activeExtns.append(extn)
+                    else:
+                        activeExtns.append(extn)
+            return activeExtns
+        else:
+            return extns
+
+    def RemoveKeyBindNames(self, extnNameList):
+        "Return extnNameList with keybinding section names removed."
+        return [n for n in extnNameList if not n.endswith(('_bindings', '_cfgBindings'))]
+
+    def GetExtnNameForEvent(self, virtualEvent):
+        """Return the name of the extension binding virtualEvent, or None.
+
+        virtualEvent - string, name of the virtual event to test for,
+                       without the enclosing '<< >>'
+        """
+        extName = None
+        vEvent = '<<' + virtualEvent + '>>'
+        for extn in self.GetExtensions(active_only=0):
+            for event in self.GetExtensionKeys(extn):
+                if event == vEvent:
+                    extName = extn  # TODO return here?
+        return extName
+
+    def GetExtensionKeys(self, extensionName):
+        """Return dict: {configurable extensionName event : active keybinding}.
+
+        Events come from default config extension_cfgBindings section.
+        Keybindings come from GetCurrentKeySet() active key dict,
+        where previously used bindings are disabled.
+        """
+        keysName = extensionName + '_cfgBindings'
+        activeKeys = self.GetCurrentKeySet()
+        extKeys = {}
+        if self.defaultCfg['extensions'].has_section(keysName):
+            eventNames = self.defaultCfg['extensions'].GetOptionList(keysName)
+            for eventName in eventNames:
+                event = '<<' + eventName + '>>'
+                binding = activeKeys[event]
+                extKeys[event] = binding
+        return extKeys
+
+    def __GetRawExtensionKeys(self,extensionName):
+        """Return dict {configurable extensionName event : keybinding list}.
+
+        Events come from default config extension_cfgBindings section.
+        Keybindings list come from the splitting of GetOption, which
+        tries user config before default config.
+        """
+        keysName = extensionName+'_cfgBindings'
+        extKeys = {}
+        if self.defaultCfg['extensions'].has_section(keysName):
+            eventNames = self.defaultCfg['extensions'].GetOptionList(keysName)
+            for eventName in eventNames:
+                binding = self.GetOption(
+                        'extensions', keysName, eventName, default='').split()
+                event = '<<' + eventName + '>>'
+                extKeys[event] = binding
+        return extKeys
+
+    def GetExtensionBindings(self, extensionName):
+        """Return dict {extensionName event : active or defined keybinding}.
+
+        Augment self.GetExtensionKeys(extensionName) with mapping of non-
+        configurable events (from default config) to GetOption splits,
+        as in self.__GetRawExtensionKeys.
+        """
+        bindsName = extensionName + '_bindings'
+        extBinds = self.GetExtensionKeys(extensionName)
+        #add the non-configurable bindings
+        if self.defaultCfg['extensions'].has_section(bindsName):
+            eventNames = self.defaultCfg['extensions'].GetOptionList(bindsName)
+            for eventName in eventNames:
+                binding = self.GetOption(
+                        'extensions', bindsName, eventName, default='').split()
+                event = '<<' + eventName + '>>'
+                extBinds[event] = binding
+
+        return extBinds
+
+    def GetKeyBinding(self, keySetName, eventStr):
+        """Return the keybinding list for keySetName eventStr.
+
+        keySetName - name of key binding set (config-keys section).
+        eventStr - virtual event, including brackets, as in '<<event>>'.
+        """
+        eventName = eventStr[2:-2] #trim off the angle brackets
+        binding = self.GetOption('keys', keySetName, eventName, default='',
+                                 warn_on_default=False).split()
+        return binding
+
+    def GetCurrentKeySet(self):
+        "Return CurrentKeys with 'darwin' modifications."
+        result = self.GetKeySet(self.CurrentKeys())
+
+        if sys.platform == "darwin":
+            # macOS (OS X) Tk variants do not support the "Alt"
+            # keyboard modifier.  Replace it with "Option".
+            # TODO (Ned?): the "Option" modifier does not work properly
+            #     for Cocoa Tk and XQuartz Tk so we should not use it
+            #     in the default 'OSX' keyset.
+            for k, v in result.items():
+                v2 = [ x.replace('<Alt-', '<Option-') for x in v ]
+                if v != v2:
+                    result[k] = v2
+
+        return result
+
+    def GetKeySet(self, keySetName):
+        """Return event-key dict for keySetName core plus active extensions.
+
+        If a binding defined in an extension is already in use, the
+        extension binding is disabled by being set to ''
+        """
+        keySet = self.GetCoreKeys(keySetName)
+        activeExtns = self.GetExtensions(active_only=1)
+        for extn in activeExtns:
+            extKeys = self.__GetRawExtensionKeys(extn)
+            if extKeys: #the extension defines keybindings
+                for event in extKeys:
+                    if extKeys[event] in keySet.values():
+                        #the binding is already in use
+                        extKeys[event] = '' #disable this binding
+                    keySet[event] = extKeys[event] #add binding
+        return keySet
+
+    def IsCoreBinding(self, virtualEvent):
+        """Return True if the virtual event is one of the core idle key events.
+
+        virtualEvent - string, name of the virtual event to test for,
+                       without the enclosing '<< >>'
+        """
+        return ('<<'+virtualEvent+'>>') in self.GetCoreKeys()
+
+# TODO make keyBindings a file or class attribute used for test above
+# and copied in function below.
+
+    former_extension_events = {  #  Those with user-configurable keys.
+        '<<force-open-completions>>', '<<expand-word>>',
+        '<<force-open-calltip>>', '<<flash-paren>>', '<<format-paragraph>>',
+         '<<run-module>>', '<<check-module>>', '<<zoom-height>>',
+         '<<run-custom>>',
+         }
+
+    def GetCoreKeys(self, keySetName=None):
+        """Return dict of core virtual-key keybindings for keySetName.
+
+        The default keySetName None corresponds to the keyBindings base
+        dict. If keySetName is not None, bindings from the config
+        file(s) are loaded _over_ these defaults, so if there is a
+        problem getting any core binding there will be an 'ultimate last
+        resort fallback' to the CUA-ish bindings defined here.
+        """
+        # TODO: = dict(sorted([(v-event, keys), ...]))?
+        keyBindings={
+            # virtual-event: list of key events.
+            '<<copy>>': ['<Control-c>', '<Control-C>'],
+            '<<cut>>': ['<Control-x>', '<Control-X>'],
+            '<<paste>>': ['<Control-v>', '<Control-V>'],
+            '<<beginning-of-line>>': ['<Control-a>', '<Home>'],
+            '<<center-insert>>': ['<Control-l>'],
+            '<<close-all-windows>>': ['<Control-q>'],
+            '<<close-window>>': ['<Alt-F4>'],
+            '<<do-nothing>>': ['<Control-x>'],
+            '<<end-of-file>>': ['<Control-d>'],
+            '<<python-docs>>': ['<F1>'],
+            '<<python-context-help>>': ['<Shift-F1>'],
+            '<<history-next>>': ['<Alt-n>'],
+            '<<history-previous>>': ['<Alt-p>'],
+            '<<interrupt-execution>>': ['<Control-c>'],
+            '<<view-restart>>': ['<F6>'],
+            '<<restart-shell>>': ['<Control-F6>'],
+            '<<open-class-browser>>': ['<Alt-c>'],
+            '<<open-module>>': ['<Alt-m>'],
+            '<<open-new-window>>': ['<Control-n>'],
+            '<<open-window-from-file>>': ['<Control-o>'],
+            '<<plain-newline-and-indent>>': ['<Control-j>'],
+            '<<print-window>>': ['<Control-p>'],
+            '<<redo>>': ['<Control-y>'],
+            '<<remove-selection>>': ['<Escape>'],
+            '<<save-copy-of-window-as-file>>': ['<Alt-Shift-S>'],
+            '<<save-window-as-file>>': ['<Alt-s>'],
+            '<<save-window>>': ['<Control-s>'],
+            '<<select-all>>': ['<Alt-a>'],
+            '<<toggle-auto-coloring>>': ['<Control-slash>'],
+            '<<undo>>': ['<Control-z>'],
+            '<<find-again>>': ['<Control-g>', '<F3>'],
+            '<<find-in-files>>': ['<Alt-F3>'],
+            '<<find-selection>>': ['<Control-F3>'],
+            '<<find>>': ['<Control-f>'],
+            '<<replace>>': ['<Control-h>'],
+            '<<goto-line>>': ['<Alt-g>'],
+            '<<smart-backspace>>': ['<Key-BackSpace>'],
+            '<<newline-and-indent>>': ['<Key-Return>', '<Key-KP_Enter>'],
+            '<<smart-indent>>': ['<Key-Tab>'],
+            '<<indent-region>>': ['<Control-Key-bracketright>'],
+            '<<dedent-region>>': ['<Control-Key-bracketleft>'],
+            '<<comment-region>>': ['<Alt-Key-3>'],
+            '<<uncomment-region>>': ['<Alt-Key-4>'],
+            '<<tabify-region>>': ['<Alt-Key-5>'],
+            '<<untabify-region>>': ['<Alt-Key-6>'],
+            '<<toggle-tabs>>': ['<Alt-Key-t>'],
+            '<<change-indentwidth>>': ['<Alt-Key-u>'],
+            '<<del-word-left>>': ['<Control-Key-BackSpace>'],
+            '<<del-word-right>>': ['<Control-Key-Delete>'],
+            '<<force-open-completions>>': ['<Control-Key-space>'],
+            '<<expand-word>>': ['<Alt-Key-slash>'],
+            '<<force-open-calltip>>': ['<Control-Key-backslash>'],
+            '<<flash-paren>>': ['<Control-Key-0>'],
+            '<<format-paragraph>>': ['<Alt-Key-q>'],
+            '<<run-module>>': ['<Key-F5>'],
+            '<<run-custom>>': ['<Shift-Key-F5>'],
+            '<<check-module>>': ['<Alt-Key-x>'],
+            '<<zoom-height>>': ['<Alt-Key-2>'],
+            }
+
+        if keySetName:
+            if not (self.userCfg['keys'].has_section(keySetName) or
+                    self.defaultCfg['keys'].has_section(keySetName)):
+                warning = (
+                    '\n Warning: config.py - IdleConf.GetCoreKeys -\n'
+                    ' key set %r is not defined, using default bindings.' %
+                    (keySetName,)
+                )
+                _warn(warning, 'keys', keySetName)
+            else:
+                for event in keyBindings:
+                    binding = self.GetKeyBinding(keySetName, event)
+                    if binding:
+                        keyBindings[event] = binding
+                    # Otherwise return default in keyBindings.
+                    elif event not in self.former_extension_events:
+                        warning = (
+                            '\n Warning: config.py - IdleConf.GetCoreKeys -\n'
+                            ' problem retrieving key binding for event %r\n'
+                            ' from key set %r.\n'
+                            ' returning default value: %r' %
+                            (event, keySetName, keyBindings[event])
+                        )
+                        _warn(warning, 'keys', keySetName, event)
+        return keyBindings
+
+    def GetExtraHelpSourceList(self, configSet):
+        """Return list of extra help sources from a given configSet.
+
+        Valid configSets are 'user' or 'default'.  Return a list of tuples of
+        the form (menu_item , path_to_help_file , option), or return the empty
+        list.  'option' is the sequence number of the help resource.  'option'
+        values determine the position of the menu items on the Help menu,
+        therefore the returned list must be sorted by 'option'.
+
+        """
+        helpSources = []
+        if configSet == 'user':
+            cfgParser = self.userCfg['main']
+        elif configSet == 'default':
+            cfgParser = self.defaultCfg['main']
+        else:
+            raise InvalidConfigSet('Invalid configSet specified')
+        options=cfgParser.GetOptionList('HelpFiles')
+        for option in options:
+            value=cfgParser.Get('HelpFiles', option, default=';')
+            if value.find(';') == -1: #malformed config entry with no ';'
+                menuItem = '' #make these empty
+                helpPath = '' #so value won't be added to list
+            else: #config entry contains ';' as expected
+                value=value.split(';')
+                menuItem=value[0].strip()
+                helpPath=value[1].strip()
+            if menuItem and helpPath: #neither are empty strings
+                helpSources.append( (menuItem,helpPath,option) )
+        helpSources.sort(key=lambda x: x[2])
+        return helpSources
+
+    def GetAllExtraHelpSourcesList(self):
+        """Return a list of the details of all additional help sources.
+
+        Tuples in the list are those of GetExtraHelpSourceList.
+        """
+        allHelpSources = (self.GetExtraHelpSourceList('default') +
+                self.GetExtraHelpSourceList('user') )
+        return allHelpSources
+
+    def GetFont(self, root, configType, section):
+        """Retrieve a font from configuration (font, font-size, font-bold)
+        Intercept the special value 'TkFixedFont' and substitute
+        the actual font, factoring in some tweaks if needed for
+        appearance sakes.
+
+        The 'root' parameter can normally be any valid Tkinter widget.
+
+        Return a tuple (family, size, weight) suitable for passing
+        to tkinter.Font
+        """
+        family = self.GetOption(configType, section, 'font', default='courier')
+        size = self.GetOption(configType, section, 'font-size', type='int',
+                              default='10')
+        bold = self.GetOption(configType, section, 'font-bold', default=0,
+                              type='bool')
+        if (family == 'TkFixedFont'):
+            f = Font(name='TkFixedFont', exists=True, root=root)
+            actualFont = Font.actual(f)
+            family = actualFont['family']
+            size = actualFont['size']
+            if size <= 0:
+                size = 10  # if font in pixels, ignore actual size
+            bold = actualFont['weight'] == 'bold'
+        return (family, size, 'bold' if bold else 'normal')
+
+    def LoadCfgFiles(self):
+        "Load all configuration files."
+        for key in self.defaultCfg:
+            self.defaultCfg[key].Load()
+            self.userCfg[key].Load() #same keys
+
+    def SaveUserCfgFiles(self):
+        "Write all loaded user configuration files to disk."
+        for key in self.userCfg:
+            self.userCfg[key].Save()
+
+
+idleConf = IdleConf()
+
+_warned = set()
+def _warn(msg, *key):
+    key = (msg,) + key
+    if key not in _warned:
+        try:
+            print(msg, file=sys.stderr)
+        except OSError:
+            pass
+        _warned.add(key)
+
+
+class ConfigChanges(dict):
+    """Manage a user's proposed configuration option changes.
+
+    Names used across multiple methods:
+        page -- one of the 4 top-level dicts representing a
+                .idlerc/config-x.cfg file.
+        config_type -- name of a page.
+        section -- a section within a page/file.
+        option -- name of an option within a section.
+        value -- value for the option.
+
+    Methods
+        add_option: Add option and value to changes.
+        save_option: Save option and value to config parser.
+        save_all: Save all the changes to the config parser and file.
+        delete_section: If section exists,
+                        delete from changes, userCfg, and file.
+        clear: Clear all changes by clearing each page.
+    """
+    def __init__(self):
+        "Create a page for each configuration file"
+        self.pages = []  # List of unhashable dicts.
+        for config_type in idleConf.config_types:
+            self[config_type] = {}
+            self.pages.append(self[config_type])
+
+    def add_option(self, config_type, section, item, value):
+        "Add item/value pair for config_type and section."
+        page = self[config_type]
+        value = str(value)  # Make sure we use a string.
+        if section not in page:
+            page[section] = {}
+        page[section][item] = value
+
+    @staticmethod
+    def save_option(config_type, section, item, value):
+        """Return True if the configuration value was added or changed.
+
+        Helper for save_all.
+        """
+        if idleConf.defaultCfg[config_type].has_option(section, item):
+            if idleConf.defaultCfg[config_type].Get(section, item) == value:
+                # The setting equals a default setting, remove it from user cfg.
+                return idleConf.userCfg[config_type].RemoveOption(section, item)
+        # If we got here, set the option.
+        return idleConf.userCfg[config_type].SetOption(section, item, value)
+
+    def save_all(self):
+        """Save configuration changes to the user config file.
+
+        Clear self in preparation for additional changes.
+        Return changed for testing.
+        """
+        idleConf.userCfg['main'].Save()
+
+        changed = False
+        for config_type in self:
+            cfg_type_changed = False
+            page = self[config_type]
+            for section in page:
+                if section == 'HelpFiles':  # Remove it for replacement.
+                    idleConf.userCfg['main'].remove_section('HelpFiles')
+                    cfg_type_changed = True
+                for item, value in page[section].items():
+                    if self.save_option(config_type, section, item, value):
+                        cfg_type_changed = True
+            if cfg_type_changed:
+                idleConf.userCfg[config_type].Save()
+                changed = True
+        for config_type in ['keys', 'highlight']:
+            # Save these even if unchanged!
+            idleConf.userCfg[config_type].Save()
+        self.clear()
+        # ConfigDialog caller must add the following call
+        # self.save_all_changed_extensions()  # Uses a different mechanism.
+        return changed
+
+    def delete_section(self, config_type, section):
+        """Delete a section from self, userCfg, and file.
+
+        Used to delete custom themes and keysets.
+        """
+        if section in self[config_type]:
+            del self[config_type][section]
+        configpage = idleConf.userCfg[config_type]
+        configpage.remove_section(section)
+        configpage.Save()
+
+    def clear(self):
+        """Clear all 4 pages.
+
+        Called in save_all after saving to idleConf.
+        XXX Mark window *title* when there are changes; unmark here.
+        """
+        for page in self.pages:
+            page.clear()
+
+
+# TODO Revise test output, write expanded unittest
+def _dump():  # htest # (not really, but ignore in coverage)
+    from zlib import crc32
+    line, crc = 0, 0
+
+    def sprint(obj):
+        nonlocal line, crc
+        txt = str(obj)
+        line += 1
+        crc = crc32(txt.encode(encoding='utf-8'), crc)
+        print(txt)
+        #print('***', line, crc, '***')  # Uncomment for diagnosis.
+
+    def dumpCfg(cfg):
+        print('\n', cfg, '\n')  # Cfg has variable '0xnnnnnnnn' address.
+        for key in sorted(cfg):
+            sections = cfg[key].sections()
+            sprint(key)
+            sprint(sections)
+            for section in sections:
+                options = cfg[key].options(section)
+                sprint(section)
+                sprint(options)
+                for option in options:
+                    sprint(option + ' = ' + cfg[key].Get(section, option))
+
+    dumpCfg(idleConf.defaultCfg)
+    dumpCfg(idleConf.userCfg)
+    print('\nlines = ', line, ', crc = ', crc, sep='')
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_config', verbosity=2, exit=False)
+
+    _dump()
+    # Run revised _dump() (700+ lines) as htest?  More sorting.
+    # Perhaps as window with tabs for textviews, making it config viewer.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config_key.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config_key.py
new file mode 100644
index 0000000000000000000000000000000000000000..e5f67e8d4069ee8dc22790e432b27beff4faf558
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/config_key.py
@@ -0,0 +1,354 @@
+"""
+Dialog for building Tkinter accelerator key bindings
+"""
+from tkinter import Toplevel, Listbox, StringVar, TclError
+from tkinter.ttk import Frame, Button, Checkbutton, Entry, Label, Scrollbar
+from tkinter import messagebox
+from tkinter.simpledialog import _setup_dialog
+import string
+import sys
+
+
+FUNCTION_KEYS = ('F1', 'F2' ,'F3' ,'F4' ,'F5' ,'F6',
+                 'F7', 'F8' ,'F9' ,'F10' ,'F11' ,'F12')
+ALPHANUM_KEYS = tuple(string.ascii_lowercase + string.digits)
+PUNCTUATION_KEYS = tuple('~!@#%^&*()_-+={}[]|;:,.<>/?')
+WHITESPACE_KEYS = ('Tab', 'Space', 'Return')
+EDIT_KEYS = ('BackSpace', 'Delete', 'Insert')
+MOVE_KEYS = ('Home', 'End', 'Page Up', 'Page Down', 'Left Arrow',
+             'Right Arrow', 'Up Arrow', 'Down Arrow')
+AVAILABLE_KEYS = (ALPHANUM_KEYS + PUNCTUATION_KEYS + FUNCTION_KEYS +
+                  WHITESPACE_KEYS + EDIT_KEYS + MOVE_KEYS)
+
+
+def translate_key(key, modifiers):
+    "Translate from keycap symbol to the Tkinter keysym."
+    mapping = {'Space':'space',
+            '~':'asciitilde', '!':'exclam', '@':'at', '#':'numbersign',
+            '%':'percent', '^':'asciicircum', '&':'ampersand',
+            '*':'asterisk', '(':'parenleft', ')':'parenright',
+            '_':'underscore', '-':'minus', '+':'plus', '=':'equal',
+            '{':'braceleft', '}':'braceright',
+            '[':'bracketleft', ']':'bracketright', '|':'bar',
+            ';':'semicolon', ':':'colon', ',':'comma', '.':'period',
+            '<':'less', '>':'greater', '/':'slash', '?':'question',
+            'Page Up':'Prior', 'Page Down':'Next',
+            'Left Arrow':'Left', 'Right Arrow':'Right',
+            'Up Arrow':'Up', 'Down Arrow': 'Down', 'Tab':'Tab'}
+    key = mapping.get(key, key)
+    if 'Shift' in modifiers and key in string.ascii_lowercase:
+        key = key.upper()
+    return f'Key-{key}'
+
+
+class GetKeysFrame(Frame):
+
+    # Dialog title for invalid key sequence
+    keyerror_title = 'Key Sequence Error'
+
+    def __init__(self, parent, action, current_key_sequences):
+        """
+        parent - parent of this dialog
+        action - the name of the virtual event these keys will be
+                 mapped to
+        current_key_sequences - a list of all key sequence lists
+                 currently mapped to virtual events, for overlap checking
+        """
+        super().__init__(parent)
+        self['borderwidth'] = 2
+        self['relief'] = 'sunken'
+        self.parent = parent
+        self.action = action
+        self.current_key_sequences = current_key_sequences
+        self.result = ''
+        self.key_string = StringVar(self)
+        self.key_string.set('')
+        # Set self.modifiers, self.modifier_label.
+        self.set_modifiers_for_platform()
+        self.modifier_vars = []
+        for modifier in self.modifiers:
+            variable = StringVar(self)
+            variable.set('')
+            self.modifier_vars.append(variable)
+        self.advanced = False
+        self.create_widgets()
+
+    def showerror(self, *args, **kwargs):
+        # Make testing easier.  Replace in #30751.
+        messagebox.showerror(*args, **kwargs)
+
+    def create_widgets(self):
+        # Basic entry key sequence.
+        self.frame_keyseq_basic = Frame(self, name='keyseq_basic')
+        self.frame_keyseq_basic.grid(row=0, column=0, sticky='nsew',
+                                      padx=5, pady=5)
+        basic_title = Label(self.frame_keyseq_basic,
+                            text=f"New keys for '{self.action}' :")
+        basic_title.pack(anchor='w')
+
+        basic_keys = Label(self.frame_keyseq_basic, justify='left',
+                           textvariable=self.key_string, relief='groove',
+                           borderwidth=2)
+        basic_keys.pack(ipadx=5, ipady=5, fill='x')
+
+        # Basic entry controls.
+        self.frame_controls_basic = Frame(self)
+        self.frame_controls_basic.grid(row=1, column=0, sticky='nsew', padx=5)
+
+        # Basic entry modifiers.
+        self.modifier_checkbuttons = {}
+        column = 0
+        for modifier, variable in zip(self.modifiers, self.modifier_vars):
+            label = self.modifier_label.get(modifier, modifier)
+            check = Checkbutton(self.frame_controls_basic,
+                                command=self.build_key_string, text=label,
+                                variable=variable, onvalue=modifier, offvalue='')
+            check.grid(row=0, column=column, padx=2, sticky='w')
+            self.modifier_checkbuttons[modifier] = check
+            column += 1
+
+        # Basic entry help text.
+        help_basic = Label(self.frame_controls_basic, justify='left',
+                           text="Select the desired modifier keys\n"+
+                                "above, and the final key from the\n"+
+                                "list on the right.\n\n" +
+                                "Use upper case Symbols when using\n" +
+                                "the Shift modifier.  (Letters will be\n" +
+                                "converted automatically.)")
+        help_basic.grid(row=1, column=0, columnspan=4, padx=2, sticky='w')
+
+        # Basic entry key list.
+        self.list_keys_final = Listbox(self.frame_controls_basic, width=15,
+                                       height=10, selectmode='single')
+        self.list_keys_final.insert('end', *AVAILABLE_KEYS)
+        self.list_keys_final.bind('<ButtonRelease-1>', self.final_key_selected)
+        self.list_keys_final.grid(row=0, column=4, rowspan=4, sticky='ns')
+        scroll_keys_final = Scrollbar(self.frame_controls_basic,
+                                      orient='vertical',
+                                      command=self.list_keys_final.yview)
+        self.list_keys_final.config(yscrollcommand=scroll_keys_final.set)
+        scroll_keys_final.grid(row=0, column=5, rowspan=4, sticky='ns')
+        self.button_clear = Button(self.frame_controls_basic,
+                                   text='Clear Keys',
+                                   command=self.clear_key_seq)
+        self.button_clear.grid(row=2, column=0, columnspan=4)
+
+        # Advanced entry key sequence.
+        self.frame_keyseq_advanced = Frame(self, name='keyseq_advanced')
+        self.frame_keyseq_advanced.grid(row=0, column=0, sticky='nsew',
+                                         padx=5, pady=5)
+        advanced_title = Label(self.frame_keyseq_advanced, justify='left',
+                               text=f"Enter new binding(s) for '{self.action}' :\n" +
+                                     "(These bindings will not be checked for validity!)")
+        advanced_title.pack(anchor='w')
+        self.advanced_keys = Entry(self.frame_keyseq_advanced,
+                                   textvariable=self.key_string)
+        self.advanced_keys.pack(fill='x')
+
+        # Advanced entry help text.
+        self.frame_help_advanced = Frame(self)
+        self.frame_help_advanced.grid(row=1, column=0, sticky='nsew', padx=5)
+        help_advanced = Label(self.frame_help_advanced, justify='left',
+            text="Key bindings are specified using Tkinter keysyms as\n"+
+                 "in these samples: <Control-f>, <Shift-F2>, <F12>,\n"
+                 "<Control-space>, <Meta-less>, <Control-Alt-Shift-X>.\n"
+                 "Upper case is used when the Shift modifier is present!\n\n" +
+                 "'Emacs style' multi-keystroke bindings are specified as\n" +
+                 "follows: <Control-x><Control-y>, where the first key\n" +
+                 "is the 'do-nothing' keybinding.\n\n" +
+                 "Multiple separate bindings for one action should be\n"+
+                 "separated by a space, eg., <Alt-v> <Meta-v>." )
+        help_advanced.grid(row=0, column=0, sticky='nsew')
+
+        # Switch between basic and advanced.
+        self.button_level = Button(self, command=self.toggle_level,
+                                  text='<< Basic Key Binding Entry')
+        self.button_level.grid(row=2, column=0, stick='ew', padx=5, pady=5)
+        self.toggle_level()
+
+    def set_modifiers_for_platform(self):
+        """Determine list of names of key modifiers for this platform.
+
+        The names are used to build Tk bindings -- it doesn't matter if the
+        keyboard has these keys; it matters if Tk understands them.  The
+        order is also important: key binding equality depends on it, so
+        config-keys.def must use the same ordering.
+        """
+        if sys.platform == "darwin":
+            self.modifiers = ['Shift', 'Control', 'Option', 'Command']
+        else:
+            self.modifiers = ['Control', 'Alt', 'Shift']
+        self.modifier_label = {'Control': 'Ctrl'}  # Short name.
+
+    def toggle_level(self):
+        "Toggle between basic and advanced keys."
+        if  self.button_level.cget('text').startswith('Advanced'):
+            self.clear_key_seq()
+            self.button_level.config(text='<< Basic Key Binding Entry')
+            self.frame_keyseq_advanced.lift()
+            self.frame_help_advanced.lift()
+            self.advanced_keys.focus_set()
+            self.advanced = True
+        else:
+            self.clear_key_seq()
+            self.button_level.config(text='Advanced Key Binding Entry >>')
+            self.frame_keyseq_basic.lift()
+            self.frame_controls_basic.lift()
+            self.advanced = False
+
+    def final_key_selected(self, event=None):
+        "Handler for clicking on key in basic settings list."
+        self.build_key_string()
+
+    def build_key_string(self):
+        "Create formatted string of modifiers plus the key."
+        keylist = modifiers = self.get_modifiers()
+        final_key = self.list_keys_final.get('anchor')
+        if final_key:
+            final_key = translate_key(final_key, modifiers)
+            keylist.append(final_key)
+        self.key_string.set(f"<{'-'.join(keylist)}>")
+
+    def get_modifiers(self):
+        "Return ordered list of modifiers that have been selected."
+        mod_list = [variable.get() for variable in self.modifier_vars]
+        return [mod for mod in mod_list if mod]
+
+    def clear_key_seq(self):
+        "Clear modifiers and keys selection."
+        self.list_keys_final.select_clear(0, 'end')
+        self.list_keys_final.yview('moveto', '0.0')
+        for variable in self.modifier_vars:
+            variable.set('')
+        self.key_string.set('')
+
+    def ok(self):
+        self.result = ''
+        keys = self.key_string.get().strip()
+        if not keys:
+            self.showerror(title=self.keyerror_title, parent=self,
+                           message="No key specified.")
+            return
+        if (self.advanced or self.keys_ok(keys)) and self.bind_ok(keys):
+            self.result = keys
+        return
+
+    def keys_ok(self, keys):
+        """Validity check on user's 'basic' keybinding selection.
+
+        Doesn't check the string produced by the advanced dialog because
+        'modifiers' isn't set.
+        """
+        final_key = self.list_keys_final.get('anchor')
+        modifiers = self.get_modifiers()
+        title = self.keyerror_title
+        key_sequences = [key for keylist in self.current_key_sequences
+                             for key in keylist]
+        if not keys.endswith('>'):
+            self.showerror(title, parent=self,
+                           message='Missing the final Key')
+        elif (not modifiers
+              and final_key not in FUNCTION_KEYS + MOVE_KEYS):
+            self.showerror(title=title, parent=self,
+                           message='No modifier key(s) specified.')
+        elif (modifiers == ['Shift']) \
+                 and (final_key not in
+                      FUNCTION_KEYS + MOVE_KEYS + ('Tab', 'Space')):
+            msg = 'The shift modifier by itself may not be used with'\
+                  ' this key symbol.'
+            self.showerror(title=title, parent=self, message=msg)
+        elif keys in key_sequences:
+            msg = 'This key combination is already in use.'
+            self.showerror(title=title, parent=self, message=msg)
+        else:
+            return True
+        return False
+
+    def bind_ok(self, keys):
+        "Return True if Tcl accepts the new keys else show message."
+        try:
+            binding = self.bind(keys, lambda: None)
+        except TclError as err:
+            self.showerror(
+                    title=self.keyerror_title, parent=self,
+                    message=(f'The entered key sequence is not accepted.\n\n'
+                             f'Error: {err}'))
+            return False
+        else:
+            self.unbind(keys, binding)
+            return True
+
+
+class GetKeysWindow(Toplevel):
+
+    def __init__(self, parent, title, action, current_key_sequences,
+                 *, _htest=False, _utest=False):
+        """
+        parent - parent of this dialog
+        title - string which is the title of the popup dialog
+        action - string, the name of the virtual event these keys will be
+                 mapped to
+        current_key_sequences - list, a list of all key sequence lists
+                 currently mapped to virtual events, for overlap checking
+        _htest - bool, change box location when running htest
+        _utest - bool, do not wait when running unittest
+        """
+        super().__init__(parent)
+        self.withdraw()  # Hide while setting geometry.
+        self['borderwidth'] = 5
+        self.resizable(height=False, width=False)
+        # Needed for winfo_reqwidth().
+        self.update_idletasks()
+        # Center dialog over parent (or below htest box).
+        x = (parent.winfo_rootx() +
+             (parent.winfo_width()//2 - self.winfo_reqwidth()//2))
+        y = (parent.winfo_rooty() +
+             ((parent.winfo_height()//2 - self.winfo_reqheight()//2)
+              if not _htest else 150))
+        self.geometry(f"+{x}+{y}")
+
+        self.title(title)
+        self.frame = frame = GetKeysFrame(self, action, current_key_sequences)
+        self.protocol("WM_DELETE_WINDOW", self.cancel)
+        frame_buttons = Frame(self)
+        self.button_ok = Button(frame_buttons, text='OK',
+                                width=8, command=self.ok)
+        self.button_cancel = Button(frame_buttons, text='Cancel',
+                                   width=8, command=self.cancel)
+        self.button_ok.grid(row=0, column=0, padx=5, pady=5)
+        self.button_cancel.grid(row=0, column=1, padx=5, pady=5)
+        frame.pack(side='top', expand=True, fill='both')
+        frame_buttons.pack(side='bottom', fill='x')
+
+        self.transient(parent)
+        _setup_dialog(self)
+        self.grab_set()
+        if not _utest:
+            self.deiconify()  # Geometry set, unhide.
+            self.wait_window()
+
+    @property
+    def result(self):
+        return self.frame.result
+
+    @result.setter
+    def result(self, value):
+        self.frame.result = value
+
+    def ok(self, event=None):
+        self.frame.ok()
+        self.grab_release()
+        self.destroy()
+
+    def cancel(self, event=None):
+        self.result = ''
+        self.grab_release()
+        self.destroy()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_config_key', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(GetKeysWindow)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/configdialog.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/configdialog.py
new file mode 100644
index 0000000000000000000000000000000000000000..e618ef07a90271c29e5bb1c90e626fa754737761
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/configdialog.py
@@ -0,0 +1,2408 @@
+"""IDLE Configuration Dialog: support user customization of IDLE by GUI
+
+Customize font faces, sizes, and colorization attributes.  Set indentation
+defaults.  Customize keybindings.  Colorization and keybindings can be
+saved as user defined sets.  Select startup options including shell/editor
+and default window size.  Define additional help sources.
+
+Note that tab width in IDLE is currently fixed at eight due to Tk issues.
+Refer to comments in EditorWindow autoindent code for details.
+
+"""
+import re
+
+from tkinter import (Toplevel, Listbox, Canvas,
+                     StringVar, BooleanVar, IntVar, TRUE, FALSE,
+                     TOP, BOTTOM, RIGHT, LEFT, SOLID, GROOVE,
+                     NONE, BOTH, X, Y, W, E, EW, NS, NSEW, NW,
+                     HORIZONTAL, VERTICAL, ANCHOR, ACTIVE, END, TclError)
+from tkinter.ttk import (Frame, LabelFrame, Button, Checkbutton, Entry, Label,
+                         OptionMenu, Notebook, Radiobutton, Scrollbar, Style,
+                         Spinbox, Combobox)
+from tkinter import colorchooser
+import tkinter.font as tkfont
+from tkinter import messagebox
+
+from idlelib.config import idleConf, ConfigChanges
+from idlelib.config_key import GetKeysWindow
+from idlelib.dynoption import DynOptionMenu
+from idlelib import macosx
+from idlelib.query import SectionName, HelpSource
+from idlelib.textview import view_text
+from idlelib.autocomplete import AutoComplete
+from idlelib.codecontext import CodeContext
+from idlelib.parenmatch import ParenMatch
+from idlelib.format import FormatParagraph
+from idlelib.squeezer import Squeezer
+from idlelib.textview import ScrollableTextFrame
+
+changes = ConfigChanges()
+# Reload changed options in the following classes.
+reloadables = (AutoComplete, CodeContext, ParenMatch, FormatParagraph,
+               Squeezer)
+
+
+class ConfigDialog(Toplevel):
+    """Config dialog for IDLE.
+    """
+
+    def __init__(self, parent, title='', *, _htest=False, _utest=False):
+        """Show the tabbed dialog for user configuration.
+
+        Args:
+            parent - parent of this dialog
+            title - string which is the title of this popup dialog
+            _htest - bool, change box location when running htest
+            _utest - bool, don't wait_window when running unittest
+
+        Note: Focus set on font page fontlist.
+
+        Methods:
+            create_widgets
+            cancel: Bound to DELETE_WINDOW protocol.
+        """
+        Toplevel.__init__(self, parent)
+        self.parent = parent
+        if _htest:
+            parent.instance_dict = {}
+        if not _utest:
+            self.withdraw()
+
+        self.title(title or 'IDLE Preferences')
+        x = parent.winfo_rootx() + 20
+        y = parent.winfo_rooty() + (30 if not _htest else 150)
+        self.geometry(f'+{x}+{y}')
+        # Each theme element key is its display name.
+        # The first value of the tuple is the sample area tag name.
+        # The second value is the display name list sort index.
+        self.create_widgets()
+        self.resizable(height=FALSE, width=FALSE)
+        self.transient(parent)
+        self.protocol("WM_DELETE_WINDOW", self.cancel)
+        self.fontpage.fontlist.focus_set()
+        # XXX Decide whether to keep or delete these key bindings.
+        # Key bindings for this dialog.
+        # self.bind('<Escape>', self.Cancel) #dismiss dialog, no save
+        # self.bind('<Alt-a>', self.Apply) #apply changes, save
+        # self.bind('<F1>', self.Help) #context help
+        # Attach callbacks after loading config to avoid calling them.
+        tracers.attach()
+
+        if not _utest:
+            self.grab_set()
+            self.wm_deiconify()
+            self.wait_window()
+
+    def create_widgets(self):
+        """Create and place widgets for tabbed dialog.
+
+        Widgets Bound to self:
+            frame: encloses all other widgets
+            note: Notebook
+            highpage: HighPage
+            fontpage: FontPage
+            keyspage: KeysPage
+            winpage: WinPage
+            shedpage: ShedPage
+            extpage: ExtPage
+
+        Methods:
+            create_action_buttons
+            load_configs: Load pages except for extensions.
+            activate_config_changes: Tell editors to reload.
+        """
+        self.frame = frame = Frame(self, padding=5)
+        self.frame.grid(sticky="nwes")
+        self.note = note = Notebook(frame)
+        self.extpage = ExtPage(note)
+        self.highpage = HighPage(note, self.extpage)
+        self.fontpage = FontPage(note, self.highpage)
+        self.keyspage = KeysPage(note, self.extpage)
+        self.winpage = WinPage(note)
+        self.shedpage = ShedPage(note)
+
+        note.add(self.fontpage, text=' Fonts ')
+        note.add(self.highpage, text='Highlights')
+        note.add(self.keyspage, text=' Keys ')
+        note.add(self.winpage, text=' Windows ')
+        note.add(self.shedpage, text=' Shell/Ed ')
+        note.add(self.extpage, text='Extensions')
+        note.enable_traversal()
+        note.pack(side=TOP, expand=TRUE, fill=BOTH)
+        self.create_action_buttons().pack(side=BOTTOM)
+
+    def create_action_buttons(self):
+        """Return frame of action buttons for dialog.
+
+        Methods:
+            ok
+            apply
+            cancel
+            help
+
+        Widget Structure:
+            outer: Frame
+                buttons: Frame
+                    (no assignment): Button (ok)
+                    (no assignment): Button (apply)
+                    (no assignment): Button (cancel)
+                    (no assignment): Button (help)
+                (no assignment): Frame
+        """
+        if macosx.isAquaTk():
+            # Changing the default padding on OSX results in unreadable
+            # text in the buttons.
+            padding_args = {}
+        else:
+            padding_args = {'padding': (6, 3)}
+        outer = Frame(self.frame, padding=2)
+        buttons_frame = Frame(outer, padding=2)
+        self.buttons = {}
+        for txt, cmd in (
+            ('Ok', self.ok),
+            ('Apply', self.apply),
+            ('Cancel', self.cancel),
+            ('Help', self.help)):
+            self.buttons[txt] = Button(buttons_frame, text=txt, command=cmd,
+                       takefocus=FALSE, **padding_args)
+            self.buttons[txt].pack(side=LEFT, padx=5)
+        # Add space above buttons.
+        Frame(outer, height=2, borderwidth=0).pack(side=TOP)
+        buttons_frame.pack(side=BOTTOM)
+        return outer
+
+    def ok(self):
+        """Apply config changes, then dismiss dialog."""
+        self.apply()
+        self.destroy()
+
+    def apply(self):
+        """Apply config changes and leave dialog open."""
+        self.deactivate_current_config()
+        changes.save_all()
+        self.extpage.save_all_changed_extensions()
+        self.activate_config_changes()
+
+    def cancel(self):
+        """Dismiss config dialog.
+
+        Methods:
+            destroy: inherited
+        """
+        changes.clear()
+        self.destroy()
+
+    def destroy(self):
+        global font_sample_text
+        font_sample_text = self.fontpage.font_sample.get('1.0', 'end')
+        self.grab_release()
+        super().destroy()
+
+    def help(self):
+        """Create textview for config dialog help.
+
+        Attributes accessed:
+            note
+        Methods:
+            view_text: Method from textview module.
+        """
+        page = self.note.tab(self.note.select(), option='text').strip()
+        view_text(self, title='Help for IDLE preferences',
+                  contents=help_common+help_pages.get(page, ''))
+
+    def deactivate_current_config(self):
+        """Remove current key bindings in current windows."""
+        for instance in self.parent.instance_dict:
+            instance.RemoveKeybindings()
+
+    def activate_config_changes(self):
+        """Apply configuration changes to current windows.
+
+        Dynamically update the current parent window instances
+        with some of the configuration changes.
+        """
+        for instance in self.parent.instance_dict:
+            instance.ResetColorizer()
+            instance.ResetFont()
+            instance.set_notabs_indentwidth()
+            instance.ApplyKeybindings()
+            instance.reset_help_menu_entries()
+            instance.update_cursor_blink()
+        for klass in reloadables:
+            klass.reload()
+
+
+# class TabPage(Frame):  # A template for Page classes.
+#     def __init__(self, master):
+#         super().__init__(master)
+#         self.create_page_tab()
+#         self.load_tab_cfg()
+#     def create_page_tab(self):
+#         # Define tk vars and register var and callback with tracers.
+#         # Create subframes and widgets.
+#         # Pack widgets.
+#     def load_tab_cfg(self):
+#         # Initialize widgets with data from idleConf.
+#     def var_changed_var_name():
+#         # For each tk var that needs other than default callback.
+#     def other_methods():
+#         # Define tab-specific behavior.
+
+font_sample_text = (
+    '<ASCII/Latin1>\n'
+    'AaBbCcDdEeFfGgHhIiJj\n1234567890#:+=(){}[]\n'
+    '\u00a2\u00a3\u00a5\u00a7\u00a9\u00ab\u00ae\u00b6\u00bd\u011e'
+    '\u00c0\u00c1\u00c2\u00c3\u00c4\u00c5\u00c7\u00d0\u00d8\u00df\n'
+    '\n<IPA,Greek,Cyrillic>\n'
+    '\u0250\u0255\u0258\u025e\u025f\u0264\u026b\u026e\u0270\u0277'
+    '\u027b\u0281\u0283\u0286\u028e\u029e\u02a2\u02ab\u02ad\u02af\n'
+    '\u0391\u03b1\u0392\u03b2\u0393\u03b3\u0394\u03b4\u0395\u03b5'
+    '\u0396\u03b6\u0397\u03b7\u0398\u03b8\u0399\u03b9\u039a\u03ba\n'
+    '\u0411\u0431\u0414\u0434\u0416\u0436\u041f\u043f\u0424\u0444'
+    '\u0427\u0447\u042a\u044a\u042d\u044d\u0460\u0464\u046c\u04dc\n'
+    '\n<Hebrew, Arabic>\n'
+    '\u05d0\u05d1\u05d2\u05d3\u05d4\u05d5\u05d6\u05d7\u05d8\u05d9'
+    '\u05da\u05db\u05dc\u05dd\u05de\u05df\u05e0\u05e1\u05e2\u05e3\n'
+    '\u0627\u0628\u062c\u062f\u0647\u0648\u0632\u062d\u0637\u064a'
+    '\u0660\u0661\u0662\u0663\u0664\u0665\u0666\u0667\u0668\u0669\n'
+    '\n<Devanagari, Tamil>\n'
+    '\u0966\u0967\u0968\u0969\u096a\u096b\u096c\u096d\u096e\u096f'
+    '\u0905\u0906\u0907\u0908\u0909\u090a\u090f\u0910\u0913\u0914\n'
+    '\u0be6\u0be7\u0be8\u0be9\u0bea\u0beb\u0bec\u0bed\u0bee\u0bef'
+    '\u0b85\u0b87\u0b89\u0b8e\n'
+    '\n<East Asian>\n'
+    '\u3007\u4e00\u4e8c\u4e09\u56db\u4e94\u516d\u4e03\u516b\u4e5d\n'
+    '\u6c49\u5b57\u6f22\u5b57\u4eba\u6728\u706b\u571f\u91d1\u6c34\n'
+    '\uac00\ub0d0\ub354\ub824\ubaa8\ubd64\uc218\uc720\uc988\uce58\n'
+    '\u3042\u3044\u3046\u3048\u304a\u30a2\u30a4\u30a6\u30a8\u30aa\n'
+    )
+
+
+class FontPage(Frame):
+
+    def __init__(self, master, highpage):
+        super().__init__(master)
+        self.highlight_sample = highpage.highlight_sample
+        self.create_page_font()
+        self.load_font_cfg()
+
+    def create_page_font(self):
+        """Return frame of widgets for Font tab.
+
+        Fonts: Enable users to provisionally change font face, size, or
+        boldness and to see the consequence of proposed choices.  Each
+        action set 3 options in changes structuree and changes the
+        corresponding aspect of the font sample on this page and
+        highlight sample on highlight page.
+
+        Function load_font_cfg initializes font vars and widgets from
+        idleConf entries and tk.
+
+        Fontlist: mouse button 1 click or up or down key invoke
+        on_fontlist_select(), which sets var font_name.
+
+        Sizelist: clicking the menubutton opens the dropdown menu. A
+        mouse button 1 click or return key sets var font_size.
+
+        Bold_toggle: clicking the box toggles var font_bold.
+
+        Changing any of the font vars invokes var_changed_font, which
+        adds all 3 font options to changes and calls set_samples.
+        Set_samples applies a new font constructed from the font vars to
+        font_sample and to highlight_sample on the highlight page.
+
+        Widgets for FontPage(Frame):  (*) widgets bound to self
+            frame_font: LabelFrame
+                frame_font_name: Frame
+                    font_name_title: Label
+                    (*)fontlist: ListBox - font_name
+                    scroll_font: Scrollbar
+                frame_font_param: Frame
+                    font_size_title: Label
+                    (*)sizelist: DynOptionMenu - font_size
+                    (*)bold_toggle: Checkbutton - font_bold
+            frame_sample: LabelFrame
+                (*)font_sample: Label
+        """
+        self.font_name = tracers.add(StringVar(self), self.var_changed_font)
+        self.font_size = tracers.add(StringVar(self), self.var_changed_font)
+        self.font_bold = tracers.add(BooleanVar(self), self.var_changed_font)
+
+        # Define frames and widgets.
+        frame_font = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                text=' Shell/Editor Font ')
+        frame_sample = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                  text=' Font Sample (Editable) ')
+        # frame_font.
+        frame_font_name = Frame(frame_font)
+        frame_font_param = Frame(frame_font)
+        font_name_title = Label(
+                frame_font_name, justify=LEFT, text='Font Face :')
+        self.fontlist = Listbox(frame_font_name, height=15,
+                                takefocus=True, exportselection=FALSE)
+        self.fontlist.bind('<ButtonRelease-1>', self.on_fontlist_select)
+        self.fontlist.bind('<KeyRelease-Up>', self.on_fontlist_select)
+        self.fontlist.bind('<KeyRelease-Down>', self.on_fontlist_select)
+        scroll_font = Scrollbar(frame_font_name)
+        scroll_font.config(command=self.fontlist.yview)
+        self.fontlist.config(yscrollcommand=scroll_font.set)
+        font_size_title = Label(frame_font_param, text='Size :')
+        self.sizelist = DynOptionMenu(frame_font_param, self.font_size, None)
+        self.bold_toggle = Checkbutton(
+                frame_font_param, variable=self.font_bold,
+                onvalue=1, offvalue=0, text='Bold')
+        # frame_sample.
+        font_sample_frame = ScrollableTextFrame(frame_sample)
+        self.font_sample = font_sample_frame.text
+        self.font_sample.config(wrap=NONE, width=1, height=1)
+        self.font_sample.insert(END, font_sample_text)
+
+        # Grid and pack widgets:
+        self.columnconfigure(1, weight=1)
+        self.rowconfigure(2, weight=1)
+        frame_font.grid(row=0, column=0, padx=5, pady=5)
+        frame_sample.grid(row=0, column=1, rowspan=3, padx=5, pady=5,
+                          sticky='nsew')
+        # frame_font.
+        frame_font_name.pack(side=TOP, padx=5, pady=5, fill=X)
+        frame_font_param.pack(side=TOP, padx=5, pady=5, fill=X)
+        font_name_title.pack(side=TOP, anchor=W)
+        self.fontlist.pack(side=LEFT, expand=TRUE, fill=X)
+        scroll_font.pack(side=LEFT, fill=Y)
+        font_size_title.pack(side=LEFT, anchor=W)
+        self.sizelist.pack(side=LEFT, anchor=W)
+        self.bold_toggle.pack(side=LEFT, anchor=W, padx=20)
+        # frame_sample.
+        font_sample_frame.pack(expand=TRUE, fill=BOTH)
+
+    def load_font_cfg(self):
+        """Load current configuration settings for the font options.
+
+        Retrieve current font with idleConf.GetFont and font families
+        from tk. Setup fontlist and set font_name.  Setup sizelist,
+        which sets font_size.  Set font_bold.  Call set_samples.
+        """
+        configured_font = idleConf.GetFont(self, 'main', 'EditorWindow')
+        font_name = configured_font[0].lower()
+        font_size = configured_font[1]
+        font_bold  = configured_font[2]=='bold'
+
+        # Set sorted no-duplicate editor font selection list and font_name.
+        fonts = sorted(set(tkfont.families(self)))
+        for font in fonts:
+            self.fontlist.insert(END, font)
+        self.font_name.set(font_name)
+        lc_fonts = [s.lower() for s in fonts]
+        try:
+            current_font_index = lc_fonts.index(font_name)
+            self.fontlist.see(current_font_index)
+            self.fontlist.select_set(current_font_index)
+            self.fontlist.select_anchor(current_font_index)
+            self.fontlist.activate(current_font_index)
+        except ValueError:
+            pass
+        # Set font size dropdown.
+        self.sizelist.SetMenu(('7', '8', '9', '10', '11', '12', '13', '14',
+                               '16', '18', '20', '22', '25', '29', '34', '40'),
+                              font_size)
+        # Set font weight.
+        self.font_bold.set(font_bold)
+        self.set_samples()
+
+    def var_changed_font(self, *params):
+        """Store changes to font attributes.
+
+        When one font attribute changes, save them all, as they are
+        not independent from each other. In particular, when we are
+        overriding the default font, we need to write out everything.
+        """
+        value = self.font_name.get()
+        changes.add_option('main', 'EditorWindow', 'font', value)
+        value = self.font_size.get()
+        changes.add_option('main', 'EditorWindow', 'font-size', value)
+        value = self.font_bold.get()
+        changes.add_option('main', 'EditorWindow', 'font-bold', value)
+        self.set_samples()
+
+    def on_fontlist_select(self, event):
+        """Handle selecting a font from the list.
+
+        Event can result from either mouse click or Up or Down key.
+        Set font_name and example displays to selection.
+        """
+        font = self.fontlist.get(
+                ACTIVE if event.type.name == 'KeyRelease' else ANCHOR)
+        self.font_name.set(font.lower())
+
+    def set_samples(self, event=None):
+        """Update both screen samples with the font settings.
+
+        Called on font initialization and change events.
+        Accesses font_name, font_size, and font_bold Variables.
+        Updates font_sample and highlight page highlight_sample.
+        """
+        font_name = self.font_name.get()
+        font_weight = tkfont.BOLD if self.font_bold.get() else tkfont.NORMAL
+        new_font = (font_name, self.font_size.get(), font_weight)
+        self.font_sample['font'] = new_font
+        self.highlight_sample['font'] = new_font
+
+
+class HighPage(Frame):
+
+    def __init__(self, master, extpage):
+        super().__init__(master)
+        self.extpage = extpage
+        self.cd = master.winfo_toplevel()
+        self.style = Style(master)
+        self.create_page_highlight()
+        self.load_theme_cfg()
+
+    def create_page_highlight(self):
+        """Return frame of widgets for Highlights tab.
+
+        Enable users to provisionally change foreground and background
+        colors applied to textual tags.  Color mappings are stored in
+        complete listings called themes.  Built-in themes in
+        idlelib/config-highlight.def are fixed as far as the dialog is
+        concerned. Any theme can be used as the base for a new custom
+        theme, stored in .idlerc/config-highlight.cfg.
+
+        Function load_theme_cfg() initializes tk variables and theme
+        lists and calls paint_theme_sample() and set_highlight_target()
+        for the current theme.  Radiobuttons builtin_theme_on and
+        custom_theme_on toggle var theme_source, which controls if the
+        current set of colors are from a builtin or custom theme.
+        DynOptionMenus builtinlist and customlist contain lists of the
+        builtin and custom themes, respectively, and the current item
+        from each list is stored in vars builtin_name and custom_name.
+
+        Function paint_theme_sample() applies the colors from the theme
+        to the tags in text widget highlight_sample and then invokes
+        set_color_sample().  Function set_highlight_target() sets the state
+        of the radiobuttons fg_on and bg_on based on the tag and it also
+        invokes set_color_sample().
+
+        Function set_color_sample() sets the background color for the frame
+        holding the color selector.  This provides a larger visual of the
+        color for the current tag and plane (foreground/background).
+
+        Note: set_color_sample() is called from many places and is often
+        called more than once when a change is made.  It is invoked when
+        foreground or background is selected (radiobuttons), from
+        paint_theme_sample() (theme is changed or load_cfg is called), and
+        from set_highlight_target() (target tag is changed or load_cfg called).
+
+        Button delete_custom invokes delete_custom() to delete
+        a custom theme from idleConf.userCfg['highlight'] and changes.
+        Button save_custom invokes save_as_new_theme() which calls
+        get_new_theme_name() and create_new() to save a custom theme
+        and its colors to idleConf.userCfg['highlight'].
+
+        Radiobuttons fg_on and bg_on toggle var fg_bg_toggle to control
+        if the current selected color for a tag is for the foreground or
+        background.
+
+        DynOptionMenu targetlist contains a readable description of the
+        tags applied to Python source within IDLE.  Selecting one of the
+        tags from this list populates highlight_target, which has a callback
+        function set_highlight_target().
+
+        Text widget highlight_sample displays a block of text (which is
+        mock Python code) in which is embedded the defined tags and reflects
+        the color attributes of the current theme and changes for those tags.
+        Mouse button 1 allows for selection of a tag and updates
+        highlight_target with that tag value.
+
+        Note: The font in highlight_sample is set through the config in
+        the fonts tab.
+
+        In other words, a tag can be selected either from targetlist or
+        by clicking on the sample text within highlight_sample.  The
+        plane (foreground/background) is selected via the radiobutton.
+        Together, these two (tag and plane) control what color is
+        shown in set_color_sample() for the current theme.  Button set_color
+        invokes get_color() which displays a ColorChooser to change the
+        color for the selected tag/plane.  If a new color is picked,
+        it will be saved to changes and the highlight_sample and
+        frame background will be updated.
+
+        Tk Variables:
+            color: Color of selected target.
+            builtin_name: Menu variable for built-in theme.
+            custom_name: Menu variable for custom theme.
+            fg_bg_toggle: Toggle for foreground/background color.
+                Note: this has no callback.
+            theme_source: Selector for built-in or custom theme.
+            highlight_target: Menu variable for the highlight tag target.
+
+        Instance Data Attributes:
+            theme_elements: Dictionary of tags for text highlighting.
+                The key is the display name and the value is a tuple of
+                (tag name, display sort order).
+
+        Methods [attachment]:
+            load_theme_cfg: Load current highlight colors.
+            get_color: Invoke colorchooser [button_set_color].
+            set_color_sample_binding: Call set_color_sample [fg_bg_toggle].
+            set_highlight_target: set fg_bg_toggle, set_color_sample().
+            set_color_sample: Set frame background to target.
+            on_new_color_set: Set new color and add option.
+            paint_theme_sample: Recolor sample.
+            get_new_theme_name: Get from popup.
+            create_new: Combine theme with changes and save.
+            save_as_new_theme: Save [button_save_custom].
+            set_theme_type: Command for [theme_source].
+            delete_custom: Activate default [button_delete_custom].
+            save_new: Save to userCfg['theme'] (is function).
+
+        Widgets of highlights page frame:  (*) widgets bound to self
+            frame_custom: LabelFrame
+                (*)highlight_sample: Text
+                (*)frame_color_set: Frame
+                    (*)button_set_color: Button
+                    (*)targetlist: DynOptionMenu - highlight_target
+                frame_fg_bg_toggle: Frame
+                    (*)fg_on: Radiobutton - fg_bg_toggle
+                    (*)bg_on: Radiobutton - fg_bg_toggle
+                (*)button_save_custom: Button
+            frame_theme: LabelFrame
+                theme_type_title: Label
+                (*)builtin_theme_on: Radiobutton - theme_source
+                (*)custom_theme_on: Radiobutton - theme_source
+                (*)builtinlist: DynOptionMenu - builtin_name
+                (*)customlist: DynOptionMenu - custom_name
+                (*)button_delete_custom: Button
+                (*)theme_message: Label
+        """
+        self.theme_elements = {
+            # Display-name: internal-config-tag-name.
+            'Normal Code or Text': 'normal',
+            'Code Context': 'context',
+            'Python Keywords': 'keyword',
+            'Python Definitions': 'definition',
+            'Python Builtins': 'builtin',
+            'Python Comments': 'comment',
+            'Python Strings': 'string',
+            'Selected Text': 'hilite',
+            'Found Text': 'hit',
+            'Cursor': 'cursor',
+            'Editor Breakpoint': 'break',
+            'Shell Prompt': 'console',
+            'Error Text': 'error',
+            'Shell User Output': 'stdout',
+            'Shell User Exception': 'stderr',
+            'Line Number': 'linenumber',
+            }
+        self.builtin_name = tracers.add(
+                StringVar(self), self.var_changed_builtin_name)
+        self.custom_name = tracers.add(
+                StringVar(self), self.var_changed_custom_name)
+        self.fg_bg_toggle = BooleanVar(self)
+        self.color = tracers.add(
+                StringVar(self), self.var_changed_color)
+        self.theme_source = tracers.add(
+                BooleanVar(self), self.var_changed_theme_source)
+        self.highlight_target = tracers.add(
+                StringVar(self), self.var_changed_highlight_target)
+
+        # Create widgets:
+        # body frame and section frames.
+        frame_custom = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                  text=' Custom Highlighting ')
+        frame_theme = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                 text=' Highlighting Theme ')
+        # frame_custom.
+        sample_frame = ScrollableTextFrame(
+                frame_custom, relief=SOLID, borderwidth=1)
+        text = self.highlight_sample = sample_frame.text
+        text.configure(
+                font=('courier', 12, ''), cursor='hand2', width=1, height=1,
+                takefocus=FALSE, highlightthickness=0, wrap=NONE)
+        # Prevent perhaps invisible selection of word or slice.
+        text.bind('<Double-Button-1>', lambda e: 'break')
+        text.bind('<B1-Motion>', lambda e: 'break')
+        string_tags=(
+            ('# Click selects item.', 'comment'), ('\n', 'normal'),
+            ('code context section', 'context'), ('\n', 'normal'),
+            ('| cursor', 'cursor'), ('\n', 'normal'),
+            ('def', 'keyword'), (' ', 'normal'),
+            ('func', 'definition'), ('(param):\n  ', 'normal'),
+            ('"Return None."', 'string'), ('\n  var0 = ', 'normal'),
+            ("'string'", 'string'), ('\n  var1 = ', 'normal'),
+            ("'selected'", 'hilite'), ('\n  var2 = ', 'normal'),
+            ("'found'", 'hit'), ('\n  var3 = ', 'normal'),
+            ('list', 'builtin'), ('(', 'normal'),
+            ('None', 'keyword'), (')\n', 'normal'),
+            ('  breakpoint("line")', 'break'), ('\n\n', 'normal'),
+            ('>>>', 'console'), (' 3.14**2\n', 'normal'),
+            ('9.8596', 'stdout'), ('\n', 'normal'),
+            ('>>>', 'console'), (' pri ', 'normal'),
+            ('n', 'error'), ('t(\n', 'normal'),
+            ('SyntaxError', 'stderr'), ('\n', 'normal'))
+        for string, tag in string_tags:
+            text.insert(END, string, tag)
+        n_lines = len(text.get('1.0', END).splitlines())
+        for lineno in range(1, n_lines):
+            text.insert(f'{lineno}.0',
+                        f'{lineno:{len(str(n_lines))}d} ',
+                        'linenumber')
+        for element in self.theme_elements:
+            def tem(event, elem=element):
+                # event.widget.winfo_top_level().highlight_target.set(elem)
+                self.highlight_target.set(elem)
+            text.tag_bind(
+                    self.theme_elements[element], '<ButtonPress-1>', tem)
+        text['state'] = 'disabled'
+        self.style.configure('frame_color_set.TFrame', borderwidth=1,
+                             relief='solid')
+        self.frame_color_set = Frame(frame_custom, style='frame_color_set.TFrame')
+        frame_fg_bg_toggle = Frame(frame_custom)
+        self.button_set_color = Button(
+                self.frame_color_set, text='Choose Color for :',
+                command=self.get_color)
+        self.targetlist = DynOptionMenu(
+                self.frame_color_set, self.highlight_target, None,
+                highlightthickness=0) #, command=self.set_highlight_targetBinding
+        self.fg_on = Radiobutton(
+                frame_fg_bg_toggle, variable=self.fg_bg_toggle, value=1,
+                text='Foreground', command=self.set_color_sample_binding)
+        self.bg_on = Radiobutton(
+                frame_fg_bg_toggle, variable=self.fg_bg_toggle, value=0,
+                text='Background', command=self.set_color_sample_binding)
+        self.fg_bg_toggle.set(1)
+        self.button_save_custom = Button(
+                frame_custom, text='Save as New Custom Theme',
+                command=self.save_as_new_theme)
+        # frame_theme.
+        theme_type_title = Label(frame_theme, text='Select : ')
+        self.builtin_theme_on = Radiobutton(
+                frame_theme, variable=self.theme_source, value=1,
+                command=self.set_theme_type, text='a Built-in Theme')
+        self.custom_theme_on = Radiobutton(
+                frame_theme, variable=self.theme_source, value=0,
+                command=self.set_theme_type, text='a Custom Theme')
+        self.builtinlist = DynOptionMenu(
+                frame_theme, self.builtin_name, None, command=None)
+        self.customlist = DynOptionMenu(
+                frame_theme, self.custom_name, None, command=None)
+        self.button_delete_custom = Button(
+                frame_theme, text='Delete Custom Theme',
+                command=self.delete_custom)
+        self.theme_message = Label(frame_theme, borderwidth=2)
+        # Pack widgets:
+        # body.
+        frame_custom.pack(side=LEFT, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        frame_theme.pack(side=TOP, padx=5, pady=5, fill=X)
+        # frame_custom.
+        self.frame_color_set.pack(side=TOP, padx=5, pady=5, fill=X)
+        frame_fg_bg_toggle.pack(side=TOP, padx=5, pady=0)
+        sample_frame.pack(
+                side=TOP, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        self.button_set_color.pack(side=TOP, expand=TRUE, fill=X, padx=8, pady=4)
+        self.targetlist.pack(side=TOP, expand=TRUE, fill=X, padx=8, pady=3)
+        self.fg_on.pack(side=LEFT, anchor=E)
+        self.bg_on.pack(side=RIGHT, anchor=W)
+        self.button_save_custom.pack(side=BOTTOM, fill=X, padx=5, pady=5)
+        # frame_theme.
+        theme_type_title.pack(side=TOP, anchor=W, padx=5, pady=5)
+        self.builtin_theme_on.pack(side=TOP, anchor=W, padx=5)
+        self.custom_theme_on.pack(side=TOP, anchor=W, padx=5, pady=2)
+        self.builtinlist.pack(side=TOP, fill=X, padx=5, pady=5)
+        self.customlist.pack(side=TOP, fill=X, anchor=W, padx=5, pady=5)
+        self.button_delete_custom.pack(side=TOP, fill=X, padx=5, pady=5)
+        self.theme_message.pack(side=TOP, fill=X, pady=5)
+
+    def load_theme_cfg(self):
+        """Load current configuration settings for the theme options.
+
+        Based on the theme_source toggle, the theme is set as
+        either builtin or custom and the initial widget values
+        reflect the current settings from idleConf.
+
+        Attributes updated:
+            theme_source: Set from idleConf.
+            builtinlist: List of default themes from idleConf.
+            customlist: List of custom themes from idleConf.
+            custom_theme_on: Disabled if there are no custom themes.
+            custom_theme: Message with additional information.
+            targetlist: Create menu from self.theme_elements.
+
+        Methods:
+            set_theme_type
+            paint_theme_sample
+            set_highlight_target
+        """
+        # Set current theme type radiobutton.
+        self.theme_source.set(idleConf.GetOption(
+                'main', 'Theme', 'default', type='bool', default=1))
+        # Set current theme.
+        current_option = idleConf.CurrentTheme()
+        # Load available theme option menus.
+        if self.theme_source.get():  # Default theme selected.
+            item_list = idleConf.GetSectionList('default', 'highlight')
+            item_list.sort()
+            self.builtinlist.SetMenu(item_list, current_option)
+            item_list = idleConf.GetSectionList('user', 'highlight')
+            item_list.sort()
+            if not item_list:
+                self.custom_theme_on.state(('disabled',))
+                self.custom_name.set('- no custom themes -')
+            else:
+                self.customlist.SetMenu(item_list, item_list[0])
+        else:  # User theme selected.
+            item_list = idleConf.GetSectionList('user', 'highlight')
+            item_list.sort()
+            self.customlist.SetMenu(item_list, current_option)
+            item_list = idleConf.GetSectionList('default', 'highlight')
+            item_list.sort()
+            self.builtinlist.SetMenu(item_list, item_list[0])
+        self.set_theme_type()
+        # Load theme element option menu.
+        theme_names = list(self.theme_elements)
+        self.targetlist.SetMenu(theme_names, theme_names[0])
+        self.paint_theme_sample()
+        self.set_highlight_target()
+
+    def var_changed_builtin_name(self, *params):
+        """Process new builtin theme selection.
+
+        Add the changed theme's name to the changed_items and recreate
+        the sample with the values from the selected theme.
+        """
+        old_themes = ('IDLE Classic', 'IDLE New')
+        value = self.builtin_name.get()
+        if value not in old_themes:
+            if idleConf.GetOption('main', 'Theme', 'name') not in old_themes:
+                changes.add_option('main', 'Theme', 'name', old_themes[0])
+            changes.add_option('main', 'Theme', 'name2', value)
+            self.theme_message['text'] = 'New theme, see Help'
+        else:
+            changes.add_option('main', 'Theme', 'name', value)
+            changes.add_option('main', 'Theme', 'name2', '')
+            self.theme_message['text'] = ''
+        self.paint_theme_sample()
+
+    def var_changed_custom_name(self, *params):
+        """Process new custom theme selection.
+
+        If a new custom theme is selected, add the name to the
+        changed_items and apply the theme to the sample.
+        """
+        value = self.custom_name.get()
+        if value != '- no custom themes -':
+            changes.add_option('main', 'Theme', 'name', value)
+            self.paint_theme_sample()
+
+    def var_changed_theme_source(self, *params):
+        """Process toggle between builtin and custom theme.
+
+        Update the default toggle value and apply the newly
+        selected theme type.
+        """
+        value = self.theme_source.get()
+        changes.add_option('main', 'Theme', 'default', value)
+        if value:
+            self.var_changed_builtin_name()
+        else:
+            self.var_changed_custom_name()
+
+    def var_changed_color(self, *params):
+        "Process change to color choice."
+        self.on_new_color_set()
+
+    def var_changed_highlight_target(self, *params):
+        "Process selection of new target tag for highlighting."
+        self.set_highlight_target()
+
+    def set_theme_type(self):
+        """Set available screen options based on builtin or custom theme.
+
+        Attributes accessed:
+            theme_source
+
+        Attributes updated:
+            builtinlist
+            customlist
+            button_delete_custom
+            custom_theme_on
+
+        Called from:
+            handler for builtin_theme_on and custom_theme_on
+            delete_custom
+            create_new
+            load_theme_cfg
+        """
+        if self.theme_source.get():
+            self.builtinlist['state'] = 'normal'
+            self.customlist['state'] = 'disabled'
+            self.button_delete_custom.state(('disabled',))
+        else:
+            self.builtinlist['state'] = 'disabled'
+            self.custom_theme_on.state(('!disabled',))
+            self.customlist['state'] = 'normal'
+            self.button_delete_custom.state(('!disabled',))
+
+    def get_color(self):
+        """Handle button to select a new color for the target tag.
+
+        If a new color is selected while using a builtin theme, a
+        name must be supplied to create a custom theme.
+
+        Attributes accessed:
+            highlight_target
+            frame_color_set
+            theme_source
+
+        Attributes updated:
+            color
+
+        Methods:
+            get_new_theme_name
+            create_new
+        """
+        target = self.highlight_target.get()
+        prev_color = self.style.lookup(self.frame_color_set['style'],
+                                       'background')
+        rgbTuplet, color_string = colorchooser.askcolor(
+                parent=self, title='Pick new color for : '+target,
+                initialcolor=prev_color)
+        if color_string and (color_string != prev_color):
+            # User didn't cancel and they chose a new color.
+            if self.theme_source.get():  # Current theme is a built-in.
+                message = ('Your changes will be saved as a new Custom Theme. '
+                           'Enter a name for your new Custom Theme below.')
+                new_theme = self.get_new_theme_name(message)
+                if not new_theme:  # User cancelled custom theme creation.
+                    return
+                else:  # Create new custom theme based on previously active theme.
+                    self.create_new(new_theme)
+                    self.color.set(color_string)
+            else:  # Current theme is user defined.
+                self.color.set(color_string)
+
+    def on_new_color_set(self):
+        "Display sample of new color selection on the dialog."
+        new_color = self.color.get()
+        self.style.configure('frame_color_set.TFrame', background=new_color)
+        plane = 'foreground' if self.fg_bg_toggle.get() else 'background'
+        sample_element = self.theme_elements[self.highlight_target.get()]
+        self.highlight_sample.tag_config(sample_element, **{plane: new_color})
+        theme = self.custom_name.get()
+        theme_element = sample_element + '-' + plane
+        changes.add_option('highlight', theme, theme_element, new_color)
+
+    def get_new_theme_name(self, message):
+        "Return name of new theme from query popup."
+        used_names = (idleConf.GetSectionList('user', 'highlight') +
+                idleConf.GetSectionList('default', 'highlight'))
+        new_theme = SectionName(
+                self, 'New Custom Theme', message, used_names).result
+        return new_theme
+
+    def save_as_new_theme(self):
+        """Prompt for new theme name and create the theme.
+
+        Methods:
+            get_new_theme_name
+            create_new
+        """
+        new_theme_name = self.get_new_theme_name('New Theme Name:')
+        if new_theme_name:
+            self.create_new(new_theme_name)
+
+    def create_new(self, new_theme_name):
+        """Create a new custom theme with the given name.
+
+        Create the new theme based on the previously active theme
+        with the current changes applied.  Once it is saved, then
+        activate the new theme.
+
+        Attributes accessed:
+            builtin_name
+            custom_name
+
+        Attributes updated:
+            customlist
+            theme_source
+
+        Method:
+            save_new
+            set_theme_type
+        """
+        if self.theme_source.get():
+            theme_type = 'default'
+            theme_name = self.builtin_name.get()
+        else:
+            theme_type = 'user'
+            theme_name = self.custom_name.get()
+        new_theme = idleConf.GetThemeDict(theme_type, theme_name)
+        # Apply any of the old theme's unsaved changes to the new theme.
+        if theme_name in changes['highlight']:
+            theme_changes = changes['highlight'][theme_name]
+            for element in theme_changes:
+                new_theme[element] = theme_changes[element]
+        # Save the new theme.
+        self.save_new(new_theme_name, new_theme)
+        # Change GUI over to the new theme.
+        custom_theme_list = idleConf.GetSectionList('user', 'highlight')
+        custom_theme_list.sort()
+        self.customlist.SetMenu(custom_theme_list, new_theme_name)
+        self.theme_source.set(0)
+        self.set_theme_type()
+
+    def set_highlight_target(self):
+        """Set fg/bg toggle and color based on highlight tag target.
+
+        Instance variables accessed:
+            highlight_target
+
+        Attributes updated:
+            fg_on
+            bg_on
+            fg_bg_toggle
+
+        Methods:
+            set_color_sample
+
+        Called from:
+            var_changed_highlight_target
+            load_theme_cfg
+        """
+        if self.highlight_target.get() == 'Cursor':  # bg not possible
+            self.fg_on.state(('disabled',))
+            self.bg_on.state(('disabled',))
+            self.fg_bg_toggle.set(1)
+        else:  # Both fg and bg can be set.
+            self.fg_on.state(('!disabled',))
+            self.bg_on.state(('!disabled',))
+            self.fg_bg_toggle.set(1)
+        self.set_color_sample()
+
+    def set_color_sample_binding(self, *args):
+        """Change color sample based on foreground/background toggle.
+
+        Methods:
+            set_color_sample
+        """
+        self.set_color_sample()
+
+    def set_color_sample(self):
+        """Set the color of the frame background to reflect the selected target.
+
+        Instance variables accessed:
+            theme_elements
+            highlight_target
+            fg_bg_toggle
+            highlight_sample
+
+        Attributes updated:
+            frame_color_set
+        """
+        # Set the color sample area.
+        tag = self.theme_elements[self.highlight_target.get()]
+        plane = 'foreground' if self.fg_bg_toggle.get() else 'background'
+        color = self.highlight_sample.tag_cget(tag, plane)
+        self.style.configure('frame_color_set.TFrame', background=color)
+
+    def paint_theme_sample(self):
+        """Apply the theme colors to each element tag in the sample text.
+
+        Instance attributes accessed:
+            theme_elements
+            theme_source
+            builtin_name
+            custom_name
+
+        Attributes updated:
+            highlight_sample: Set the tag elements to the theme.
+
+        Methods:
+            set_color_sample
+
+        Called from:
+            var_changed_builtin_name
+            var_changed_custom_name
+            load_theme_cfg
+        """
+        if self.theme_source.get():  # Default theme
+            theme = self.builtin_name.get()
+        else:  # User theme
+            theme = self.custom_name.get()
+        for element_title in self.theme_elements:
+            element = self.theme_elements[element_title]
+            colors = idleConf.GetHighlight(theme, element)
+            if element == 'cursor':  # Cursor sample needs special painting.
+                colors['background'] = idleConf.GetHighlight(
+                        theme, 'normal')['background']
+            # Handle any unsaved changes to this theme.
+            if theme in changes['highlight']:
+                theme_dict = changes['highlight'][theme]
+                if element + '-foreground' in theme_dict:
+                    colors['foreground'] = theme_dict[element + '-foreground']
+                if element + '-background' in theme_dict:
+                    colors['background'] = theme_dict[element + '-background']
+            self.highlight_sample.tag_config(element, **colors)
+        self.set_color_sample()
+
+    def save_new(self, theme_name, theme):
+        """Save a newly created theme to idleConf.
+
+        theme_name - string, the name of the new theme
+        theme - dictionary containing the new theme
+        """
+        idleConf.userCfg['highlight'].AddSection(theme_name)
+        for element in theme:
+            value = theme[element]
+            idleConf.userCfg['highlight'].SetOption(theme_name, element, value)
+
+    def askyesno(self, *args, **kwargs):
+        # Make testing easier.  Could change implementation.
+        return messagebox.askyesno(*args, **kwargs)
+
+    def delete_custom(self):
+        """Handle event to delete custom theme.
+
+        The current theme is deactivated and the default theme is
+        activated.  The custom theme is permanently removed from
+        the config file.
+
+        Attributes accessed:
+            custom_name
+
+        Attributes updated:
+            custom_theme_on
+            customlist
+            theme_source
+            builtin_name
+
+        Methods:
+            deactivate_current_config
+            save_all_changed_extensions
+            activate_config_changes
+            set_theme_type
+        """
+        theme_name = self.custom_name.get()
+        delmsg = 'Are you sure you wish to delete the theme %r ?'
+        if not self.askyesno(
+                'Delete Theme',  delmsg % theme_name, parent=self):
+            return
+        self.cd.deactivate_current_config()
+        # Remove theme from changes, config, and file.
+        changes.delete_section('highlight', theme_name)
+        # Reload user theme list.
+        item_list = idleConf.GetSectionList('user', 'highlight')
+        item_list.sort()
+        if not item_list:
+            self.custom_theme_on.state(('disabled',))
+            self.customlist.SetMenu(item_list, '- no custom themes -')
+        else:
+            self.customlist.SetMenu(item_list, item_list[0])
+        # Revert to default theme.
+        self.theme_source.set(idleConf.defaultCfg['main'].Get('Theme', 'default'))
+        self.builtin_name.set(idleConf.defaultCfg['main'].Get('Theme', 'name'))
+        # User can't back out of these changes, they must be applied now.
+        changes.save_all()
+        self.extpage.save_all_changed_extensions()
+        self.cd.activate_config_changes()
+        self.set_theme_type()
+
+
+class KeysPage(Frame):
+
+    def __init__(self, master, extpage):
+        super().__init__(master)
+        self.extpage = extpage
+        self.cd = master.winfo_toplevel()
+        self.create_page_keys()
+        self.load_key_cfg()
+
+    def create_page_keys(self):
+        """Return frame of widgets for Keys tab.
+
+        Enable users to provisionally change both individual and sets of
+        keybindings (shortcut keys). Except for features implemented as
+        extensions, keybindings are stored in complete sets called
+        keysets. Built-in keysets in idlelib/config-keys.def are fixed
+        as far as the dialog is concerned. Any keyset can be used as the
+        base for a new custom keyset, stored in .idlerc/config-keys.cfg.
+
+        Function load_key_cfg() initializes tk variables and keyset
+        lists and calls load_keys_list for the current keyset.
+        Radiobuttons builtin_keyset_on and custom_keyset_on toggle var
+        keyset_source, which controls if the current set of keybindings
+        are from a builtin or custom keyset. DynOptionMenus builtinlist
+        and customlist contain lists of the builtin and custom keysets,
+        respectively, and the current item from each list is stored in
+        vars builtin_name and custom_name.
+
+        Button delete_custom_keys invokes delete_custom_keys() to delete
+        a custom keyset from idleConf.userCfg['keys'] and changes.  Button
+        save_custom_keys invokes save_as_new_key_set() which calls
+        get_new_keys_name() and create_new_key_set() to save a custom keyset
+        and its keybindings to idleConf.userCfg['keys'].
+
+        Listbox bindingslist contains all of the keybindings for the
+        selected keyset.  The keybindings are loaded in load_keys_list()
+        and are pairs of (event, [keys]) where keys can be a list
+        of one or more key combinations to bind to the same event.
+        Mouse button 1 click invokes on_bindingslist_select(), which
+        allows button_new_keys to be clicked.
+
+        So, an item is selected in listbindings, which activates
+        button_new_keys, and clicking button_new_keys calls function
+        get_new_keys().  Function get_new_keys() gets the key mappings from the
+        current keyset for the binding event item that was selected.  The
+        function then displays another dialog, GetKeysDialog, with the
+        selected binding event and current keys and allows new key sequences
+        to be entered for that binding event.  If the keys aren't
+        changed, nothing happens.  If the keys are changed and the keyset
+        is a builtin, function get_new_keys_name() will be called
+        for input of a custom keyset name.  If no name is given, then the
+        change to the keybinding will abort and no updates will be made.  If
+        a custom name is entered in the prompt or if the current keyset was
+        already custom (and thus didn't require a prompt), then
+        idleConf.userCfg['keys'] is updated in function create_new_key_set()
+        with the change to the event binding.  The item listing in bindingslist
+        is updated with the new keys.  Var keybinding is also set which invokes
+        the callback function, var_changed_keybinding, to add the change to
+        the 'keys' or 'extensions' changes tracker based on the binding type.
+
+        Tk Variables:
+            keybinding: Action/key bindings.
+
+        Methods:
+            load_keys_list: Reload active set.
+            create_new_key_set: Combine active keyset and changes.
+            set_keys_type: Command for keyset_source.
+            save_new_key_set: Save to idleConf.userCfg['keys'] (is function).
+            deactivate_current_config: Remove keys bindings in editors.
+
+        Widgets for KeysPage(frame):  (*) widgets bound to self
+            frame_key_sets: LabelFrame
+                frames[0]: Frame
+                    (*)builtin_keyset_on: Radiobutton - var keyset_source
+                    (*)custom_keyset_on: Radiobutton - var keyset_source
+                    (*)builtinlist: DynOptionMenu - var builtin_name,
+                            func keybinding_selected
+                    (*)customlist: DynOptionMenu - var custom_name,
+                            func keybinding_selected
+                    (*)keys_message: Label
+                frames[1]: Frame
+                    (*)button_delete_custom_keys: Button - delete_custom_keys
+                    (*)button_save_custom_keys: Button -  save_as_new_key_set
+            frame_custom: LabelFrame
+                frame_target: Frame
+                    target_title: Label
+                    scroll_target_y: Scrollbar
+                    scroll_target_x: Scrollbar
+                    (*)bindingslist: ListBox - on_bindingslist_select
+                    (*)button_new_keys: Button - get_new_keys & ..._name
+        """
+        self.builtin_name = tracers.add(
+                StringVar(self), self.var_changed_builtin_name)
+        self.custom_name = tracers.add(
+                StringVar(self), self.var_changed_custom_name)
+        self.keyset_source = tracers.add(
+                BooleanVar(self), self.var_changed_keyset_source)
+        self.keybinding = tracers.add(
+                StringVar(self), self.var_changed_keybinding)
+
+        # Create widgets:
+        # body and section frames.
+        frame_custom = LabelFrame(
+                self, borderwidth=2, relief=GROOVE,
+                text=' Custom Key Bindings ')
+        frame_key_sets = LabelFrame(
+                self, borderwidth=2, relief=GROOVE, text=' Key Set ')
+        # frame_custom.
+        frame_target = Frame(frame_custom)
+        target_title = Label(frame_target, text='Action - Key(s)')
+        scroll_target_y = Scrollbar(frame_target)
+        scroll_target_x = Scrollbar(frame_target, orient=HORIZONTAL)
+        self.bindingslist = Listbox(
+                frame_target, takefocus=FALSE, exportselection=FALSE)
+        self.bindingslist.bind('<ButtonRelease-1>',
+                               self.on_bindingslist_select)
+        scroll_target_y['command'] = self.bindingslist.yview
+        scroll_target_x['command'] = self.bindingslist.xview
+        self.bindingslist['yscrollcommand'] = scroll_target_y.set
+        self.bindingslist['xscrollcommand'] = scroll_target_x.set
+        self.button_new_keys = Button(
+                frame_custom, text='Get New Keys for Selection',
+                command=self.get_new_keys, state='disabled')
+        # frame_key_sets.
+        frames = [Frame(frame_key_sets, padding=2, borderwidth=0)
+                  for i in range(2)]
+        self.builtin_keyset_on = Radiobutton(
+                frames[0], variable=self.keyset_source, value=1,
+                command=self.set_keys_type, text='Use a Built-in Key Set')
+        self.custom_keyset_on = Radiobutton(
+                frames[0], variable=self.keyset_source, value=0,
+                command=self.set_keys_type, text='Use a Custom Key Set')
+        self.builtinlist = DynOptionMenu(
+                frames[0], self.builtin_name, None, command=None)
+        self.customlist = DynOptionMenu(
+                frames[0], self.custom_name, None, command=None)
+        self.button_delete_custom_keys = Button(
+                frames[1], text='Delete Custom Key Set',
+                command=self.delete_custom_keys)
+        self.button_save_custom_keys = Button(
+                frames[1], text='Save as New Custom Key Set',
+                command=self.save_as_new_key_set)
+        self.keys_message = Label(frames[0], borderwidth=2)
+
+        # Pack widgets:
+        # body.
+        frame_custom.pack(side=BOTTOM, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        frame_key_sets.pack(side=BOTTOM, padx=5, pady=5, fill=BOTH)
+        # frame_custom.
+        self.button_new_keys.pack(side=BOTTOM, fill=X, padx=5, pady=5)
+        frame_target.pack(side=LEFT, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        # frame_target.
+        frame_target.columnconfigure(0, weight=1)
+        frame_target.rowconfigure(1, weight=1)
+        target_title.grid(row=0, column=0, columnspan=2, sticky=W)
+        self.bindingslist.grid(row=1, column=0, sticky=NSEW)
+        scroll_target_y.grid(row=1, column=1, sticky=NS)
+        scroll_target_x.grid(row=2, column=0, sticky=EW)
+        # frame_key_sets.
+        self.builtin_keyset_on.grid(row=0, column=0, sticky=W+NS)
+        self.custom_keyset_on.grid(row=1, column=0, sticky=W+NS)
+        self.builtinlist.grid(row=0, column=1, sticky=NSEW)
+        self.customlist.grid(row=1, column=1, sticky=NSEW)
+        self.keys_message.grid(row=0, column=2, sticky=NSEW, padx=5, pady=5)
+        self.button_delete_custom_keys.pack(side=LEFT, fill=X, expand=True, padx=2)
+        self.button_save_custom_keys.pack(side=LEFT, fill=X, expand=True, padx=2)
+        frames[0].pack(side=TOP, fill=BOTH, expand=True)
+        frames[1].pack(side=TOP, fill=X, expand=True, pady=2)
+
+    def load_key_cfg(self):
+        "Load current configuration settings for the keybinding options."
+        # Set current keys type radiobutton.
+        self.keyset_source.set(idleConf.GetOption(
+                'main', 'Keys', 'default', type='bool', default=1))
+        # Set current keys.
+        current_option = idleConf.CurrentKeys()
+        # Load available keyset option menus.
+        if self.keyset_source.get():  # Default theme selected.
+            item_list = idleConf.GetSectionList('default', 'keys')
+            item_list.sort()
+            self.builtinlist.SetMenu(item_list, current_option)
+            item_list = idleConf.GetSectionList('user', 'keys')
+            item_list.sort()
+            if not item_list:
+                self.custom_keyset_on.state(('disabled',))
+                self.custom_name.set('- no custom keys -')
+            else:
+                self.customlist.SetMenu(item_list, item_list[0])
+        else:  # User key set selected.
+            item_list = idleConf.GetSectionList('user', 'keys')
+            item_list.sort()
+            self.customlist.SetMenu(item_list, current_option)
+            item_list = idleConf.GetSectionList('default', 'keys')
+            item_list.sort()
+            self.builtinlist.SetMenu(item_list, idleConf.default_keys())
+        self.set_keys_type()
+        # Load keyset element list.
+        keyset_name = idleConf.CurrentKeys()
+        self.load_keys_list(keyset_name)
+
+    def var_changed_builtin_name(self, *params):
+        "Process selection of builtin key set."
+        old_keys = (
+            'IDLE Classic Windows',
+            'IDLE Classic Unix',
+            'IDLE Classic Mac',
+            'IDLE Classic OSX',
+        )
+        value = self.builtin_name.get()
+        if value not in old_keys:
+            if idleConf.GetOption('main', 'Keys', 'name') not in old_keys:
+                changes.add_option('main', 'Keys', 'name', old_keys[0])
+            changes.add_option('main', 'Keys', 'name2', value)
+            self.keys_message['text'] = 'New key set, see Help'
+        else:
+            changes.add_option('main', 'Keys', 'name', value)
+            changes.add_option('main', 'Keys', 'name2', '')
+            self.keys_message['text'] = ''
+        self.load_keys_list(value)
+
+    def var_changed_custom_name(self, *params):
+        "Process selection of custom key set."
+        value = self.custom_name.get()
+        if value != '- no custom keys -':
+            changes.add_option('main', 'Keys', 'name', value)
+            self.load_keys_list(value)
+
+    def var_changed_keyset_source(self, *params):
+        "Process toggle between builtin key set and custom key set."
+        value = self.keyset_source.get()
+        changes.add_option('main', 'Keys', 'default', value)
+        if value:
+            self.var_changed_builtin_name()
+        else:
+            self.var_changed_custom_name()
+
+    def var_changed_keybinding(self, *params):
+        "Store change to a keybinding."
+        value = self.keybinding.get()
+        key_set = self.custom_name.get()
+        event = self.bindingslist.get(ANCHOR).split()[0]
+        if idleConf.IsCoreBinding(event):
+            changes.add_option('keys', key_set, event, value)
+        else:  # Event is an extension binding.
+            ext_name = idleConf.GetExtnNameForEvent(event)
+            ext_keybind_section = ext_name + '_cfgBindings'
+            changes.add_option('extensions', ext_keybind_section, event, value)
+
+    def set_keys_type(self):
+        "Set available screen options based on builtin or custom key set."
+        if self.keyset_source.get():
+            self.builtinlist['state'] = 'normal'
+            self.customlist['state'] = 'disabled'
+            self.button_delete_custom_keys.state(('disabled',))
+        else:
+            self.builtinlist['state'] = 'disabled'
+            self.custom_keyset_on.state(('!disabled',))
+            self.customlist['state'] = 'normal'
+            self.button_delete_custom_keys.state(('!disabled',))
+
+    def get_new_keys(self):
+        """Handle event to change key binding for selected line.
+
+        A selection of a key/binding in the list of current
+        bindings pops up a dialog to enter a new binding.  If
+        the current key set is builtin and a binding has
+        changed, then a name for a custom key set needs to be
+        entered for the change to be applied.
+        """
+        list_index = self.bindingslist.index(ANCHOR)
+        binding = self.bindingslist.get(list_index)
+        bind_name = binding.split()[0]
+        if self.keyset_source.get():
+            current_key_set_name = self.builtin_name.get()
+        else:
+            current_key_set_name = self.custom_name.get()
+        current_bindings = idleConf.GetCurrentKeySet()
+        if current_key_set_name in changes['keys']:  # unsaved changes
+            key_set_changes = changes['keys'][current_key_set_name]
+            for event in key_set_changes:
+                current_bindings[event] = key_set_changes[event].split()
+        current_key_sequences = list(current_bindings.values())
+        new_keys = GetKeysWindow(self, 'Get New Keys', bind_name,
+                current_key_sequences).result
+        if new_keys:
+            if self.keyset_source.get():  # Current key set is a built-in.
+                message = ('Your changes will be saved as a new Custom Key Set.'
+                           ' Enter a name for your new Custom Key Set below.')
+                new_keyset = self.get_new_keys_name(message)
+                if not new_keyset:  # User cancelled custom key set creation.
+                    self.bindingslist.select_set(list_index)
+                    self.bindingslist.select_anchor(list_index)
+                    return
+                else:  # Create new custom key set based on previously active key set.
+                    self.create_new_key_set(new_keyset)
+            self.bindingslist.delete(list_index)
+            self.bindingslist.insert(list_index, bind_name+' - '+new_keys)
+            self.bindingslist.select_set(list_index)
+            self.bindingslist.select_anchor(list_index)
+            self.keybinding.set(new_keys)
+        else:
+            self.bindingslist.select_set(list_index)
+            self.bindingslist.select_anchor(list_index)
+
+    def get_new_keys_name(self, message):
+        "Return new key set name from query popup."
+        used_names = (idleConf.GetSectionList('user', 'keys') +
+                idleConf.GetSectionList('default', 'keys'))
+        new_keyset = SectionName(
+                self, 'New Custom Key Set', message, used_names).result
+        return new_keyset
+
+    def save_as_new_key_set(self):
+        "Prompt for name of new key set and save changes using that name."
+        new_keys_name = self.get_new_keys_name('New Key Set Name:')
+        if new_keys_name:
+            self.create_new_key_set(new_keys_name)
+
+    def on_bindingslist_select(self, event):
+        "Activate button to assign new keys to selected action."
+        self.button_new_keys.state(('!disabled',))
+
+    def create_new_key_set(self, new_key_set_name):
+        """Create a new custom key set with the given name.
+
+        Copy the bindings/keys from the previously active keyset
+        to the new keyset and activate the new custom keyset.
+        """
+        if self.keyset_source.get():
+            prev_key_set_name = self.builtin_name.get()
+        else:
+            prev_key_set_name = self.custom_name.get()
+        prev_keys = idleConf.GetCoreKeys(prev_key_set_name)
+        new_keys = {}
+        for event in prev_keys:  # Add key set to changed items.
+            event_name = event[2:-2]  # Trim off the angle brackets.
+            binding = ' '.join(prev_keys[event])
+            new_keys[event_name] = binding
+        # Handle any unsaved changes to prev key set.
+        if prev_key_set_name in changes['keys']:
+            key_set_changes = changes['keys'][prev_key_set_name]
+            for event in key_set_changes:
+                new_keys[event] = key_set_changes[event]
+        # Save the new key set.
+        self.save_new_key_set(new_key_set_name, new_keys)
+        # Change GUI over to the new key set.
+        custom_key_list = idleConf.GetSectionList('user', 'keys')
+        custom_key_list.sort()
+        self.customlist.SetMenu(custom_key_list, new_key_set_name)
+        self.keyset_source.set(0)
+        self.set_keys_type()
+
+    def load_keys_list(self, keyset_name):
+        """Reload the list of action/key binding pairs for the active key set.
+
+        An action/key binding can be selected to change the key binding.
+        """
+        reselect = False
+        if self.bindingslist.curselection():
+            reselect = True
+            list_index = self.bindingslist.index(ANCHOR)
+        keyset = idleConf.GetKeySet(keyset_name)
+        # 'set' is dict mapping virtual event to list of key events.
+        bind_names = list(keyset)
+        bind_names.sort()
+        self.bindingslist.delete(0, END)
+        for bind_name in bind_names:
+            key = ' '.join(keyset[bind_name])
+            bind_name = bind_name[2:-2]  # Trim double angle brackets.
+            if keyset_name in changes['keys']:
+                # Handle any unsaved changes to this key set.
+                if bind_name in changes['keys'][keyset_name]:
+                    key = changes['keys'][keyset_name][bind_name]
+            self.bindingslist.insert(END, bind_name+' - '+key)
+        if reselect:
+            self.bindingslist.see(list_index)
+            self.bindingslist.select_set(list_index)
+            self.bindingslist.select_anchor(list_index)
+
+    @staticmethod
+    def save_new_key_set(keyset_name, keyset):
+        """Save a newly created core key set.
+
+        Add keyset to idleConf.userCfg['keys'], not to disk.
+        If the keyset doesn't exist, it is created.  The
+        binding/keys are taken from the keyset argument.
+
+        keyset_name - string, the name of the new key set
+        keyset - dictionary containing the new keybindings
+        """
+        idleConf.userCfg['keys'].AddSection(keyset_name)
+        for event in keyset:
+            value = keyset[event]
+            idleConf.userCfg['keys'].SetOption(keyset_name, event, value)
+
+    def askyesno(self, *args, **kwargs):
+        # Make testing easier.  Could change implementation.
+        return messagebox.askyesno(*args, **kwargs)
+
+    def delete_custom_keys(self):
+        """Handle event to delete a custom key set.
+
+        Applying the delete deactivates the current configuration and
+        reverts to the default.  The custom key set is permanently
+        deleted from the config file.
+        """
+        keyset_name = self.custom_name.get()
+        delmsg = 'Are you sure you wish to delete the key set %r ?'
+        if not self.askyesno(
+                'Delete Key Set',  delmsg % keyset_name, parent=self):
+            return
+        self.cd.deactivate_current_config()
+        # Remove key set from changes, config, and file.
+        changes.delete_section('keys', keyset_name)
+        # Reload user key set list.
+        item_list = idleConf.GetSectionList('user', 'keys')
+        item_list.sort()
+        if not item_list:
+            self.custom_keyset_on.state(('disabled',))
+            self.customlist.SetMenu(item_list, '- no custom keys -')
+        else:
+            self.customlist.SetMenu(item_list, item_list[0])
+        # Revert to default key set.
+        self.keyset_source.set(idleConf.defaultCfg['main']
+                               .Get('Keys', 'default'))
+        self.builtin_name.set(idleConf.defaultCfg['main'].Get('Keys', 'name')
+                              or idleConf.default_keys())
+        # User can't back out of these changes, they must be applied now.
+        changes.save_all()
+        self.extpage.save_all_changed_extensions()
+        self.cd.activate_config_changes()
+        self.set_keys_type()
+
+
+class WinPage(Frame):
+
+    def __init__(self, master):
+        super().__init__(master)
+
+        self.init_validators()
+        self.create_page_windows()
+        self.load_windows_cfg()
+
+    def init_validators(self):
+        digits_or_empty_re = re.compile(r'[0-9]*')
+        def is_digits_or_empty(s):
+            "Return 's is blank or contains only digits'"
+            return digits_or_empty_re.fullmatch(s) is not None
+        self.digits_only = (self.register(is_digits_or_empty), '%P',)
+
+    def create_page_windows(self):
+        """Return frame of widgets for Windows tab.
+
+        Enable users to provisionally change general window options.
+        Function load_windows_cfg initializes tk variable idleConf.
+        Radiobuttons startup_shell_on and startup_editor_on set var
+        startup_edit. Entry boxes win_width_int and win_height_int set var
+        win_width and win_height.  Setting var_name invokes the default
+        callback that adds option to changes.
+
+        Widgets for WinPage(Frame):  > vars, bound to self
+            frame_window: LabelFrame
+                frame_run: Frame
+                    startup_title: Label
+                    startup_editor_on: Radiobutton > startup_edit
+                    startup_shell_on: Radiobutton > startup_edit
+                frame_win_size: Frame
+                    win_size_title: Label
+                    win_width_title: Label
+                    win_width_int: Entry > win_width
+                    win_height_title: Label
+                    win_height_int: Entry > win_height
+                frame_cursor: Frame
+                    indent_title: Label
+                    indent_chooser: Spinbox > indent_spaces
+                    blink_on: Checkbutton > cursor_blink
+                frame_autocomplete: Frame
+                    auto_wait_title: Label
+                    auto_wait_int: Entry > autocomplete_wait
+                frame_paren1: Frame
+                    paren_style_title: Label
+                    paren_style_type: OptionMenu > paren_style
+                frame_paren2: Frame
+                    paren_time_title: Label
+                    paren_flash_time: Entry > flash_delay
+                    bell_on: Checkbutton > paren_bell
+                frame_format: Frame
+                    format_width_title: Label
+                    format_width_int: Entry > format_width
+        """
+        # Integer values need StringVar because int('') raises.
+        self.startup_edit = tracers.add(
+                IntVar(self), ('main', 'General', 'editor-on-startup'))
+        self.win_width = tracers.add(
+                StringVar(self), ('main', 'EditorWindow', 'width'))
+        self.win_height = tracers.add(
+                StringVar(self), ('main', 'EditorWindow', 'height'))
+        self.indent_spaces = tracers.add(
+                StringVar(self), ('main', 'Indent', 'num-spaces'))
+        self.cursor_blink = tracers.add(
+                BooleanVar(self), ('main', 'EditorWindow', 'cursor-blink'))
+        self.autocomplete_wait = tracers.add(
+                StringVar(self), ('extensions', 'AutoComplete', 'popupwait'))
+        self.paren_style = tracers.add(
+                StringVar(self), ('extensions', 'ParenMatch', 'style'))
+        self.flash_delay = tracers.add(
+                StringVar(self), ('extensions', 'ParenMatch', 'flash-delay'))
+        self.paren_bell = tracers.add(
+                BooleanVar(self), ('extensions', 'ParenMatch', 'bell'))
+        self.format_width = tracers.add(
+                StringVar(self), ('extensions', 'FormatParagraph', 'max-width'))
+
+        # Create widgets:
+        frame_window = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                  text=' Window Preferences')
+
+        frame_run = Frame(frame_window, borderwidth=0)
+        startup_title = Label(frame_run, text='At Startup')
+        self.startup_editor_on = Radiobutton(
+                frame_run, variable=self.startup_edit, value=1,
+                text="Open Edit Window")
+        self.startup_shell_on = Radiobutton(
+                frame_run, variable=self.startup_edit, value=0,
+                text='Open Shell Window')
+
+        frame_win_size = Frame(frame_window, borderwidth=0)
+        win_size_title = Label(
+                frame_win_size, text='Initial Window Size  (in characters)')
+        win_width_title = Label(frame_win_size, text='Width')
+        self.win_width_int = Entry(
+                frame_win_size, textvariable=self.win_width, width=3,
+                validatecommand=self.digits_only, validate='key',
+        )
+        win_height_title = Label(frame_win_size, text='Height')
+        self.win_height_int = Entry(
+                frame_win_size, textvariable=self.win_height, width=3,
+                validatecommand=self.digits_only, validate='key',
+        )
+
+        frame_cursor = Frame(frame_window, borderwidth=0)
+        indent_title = Label(frame_cursor,
+                             text='Indent spaces (4 is standard)')
+        try:
+            self.indent_chooser = Spinbox(
+                    frame_cursor, textvariable=self.indent_spaces,
+                    from_=1, to=10, width=2,
+                    validatecommand=self.digits_only, validate='key')
+        except TclError:
+            self.indent_chooser = Combobox(
+                    frame_cursor, textvariable=self.indent_spaces,
+                    state="readonly", values=list(range(1,11)), width=3)
+        cursor_blink_title = Label(frame_cursor, text='Cursor Blink')
+        self.cursor_blink_bool = Checkbutton(frame_cursor, text="Cursor blink",
+                                             variable=self.cursor_blink)
+
+        frame_autocomplete = Frame(frame_window, borderwidth=0,)
+        auto_wait_title = Label(frame_autocomplete,
+                                text='Completions Popup Wait (milliseconds)')
+        self.auto_wait_int = Entry(
+                frame_autocomplete, textvariable=self.autocomplete_wait,
+                width=6, validatecommand=self.digits_only, validate='key')
+
+        frame_paren1 = Frame(frame_window, borderwidth=0)
+        paren_style_title = Label(frame_paren1, text='Paren Match Style')
+        self.paren_style_type = OptionMenu(
+                frame_paren1, self.paren_style, 'expression',
+                "opener","parens","expression")
+        frame_paren2 = Frame(frame_window, borderwidth=0)
+        paren_time_title = Label(
+                frame_paren2, text='Time Match Displayed (milliseconds)\n'
+                                  '(0 is until next input)')
+        self.paren_flash_time = Entry(
+                frame_paren2, textvariable=self.flash_delay, width=6,
+                validatecommand=self.digits_only, validate='key')
+        self.bell_on = Checkbutton(
+                frame_paren2, text="Bell on Mismatch", variable=self.paren_bell)
+        frame_format = Frame(frame_window, borderwidth=0)
+        format_width_title = Label(frame_format,
+                                   text='Format Paragraph Max Width')
+        self.format_width_int = Entry(
+                frame_format, textvariable=self.format_width, width=4,
+                validatecommand=self.digits_only, validate='key',
+                )
+
+        # Pack widgets:
+        frame_window.pack(side=TOP, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        # frame_run.
+        frame_run.pack(side=TOP, padx=5, pady=0, fill=X)
+        startup_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.startup_shell_on.pack(side=RIGHT, anchor=W, padx=5, pady=5)
+        self.startup_editor_on.pack(side=RIGHT, anchor=W, padx=5, pady=5)
+        # frame_win_size.
+        frame_win_size.pack(side=TOP, padx=5, pady=0, fill=X)
+        win_size_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.win_height_int.pack(side=RIGHT, anchor=E, padx=10, pady=5)
+        win_height_title.pack(side=RIGHT, anchor=E, pady=5)
+        self.win_width_int.pack(side=RIGHT, anchor=E, padx=10, pady=5)
+        win_width_title.pack(side=RIGHT, anchor=E, pady=5)
+        # frame_cursor.
+        frame_cursor.pack(side=TOP, padx=5, pady=0, fill=X)
+        indent_title.pack(side=LEFT, anchor=W, padx=5)
+        self.indent_chooser.pack(side=LEFT, anchor=W, padx=10)
+        self.cursor_blink_bool.pack(side=RIGHT, anchor=E, padx=15, pady=5)
+        # frame_autocomplete.
+        frame_autocomplete.pack(side=TOP, padx=5, pady=0, fill=X)
+        auto_wait_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.auto_wait_int.pack(side=TOP, padx=10, pady=5)
+        # frame_paren.
+        frame_paren1.pack(side=TOP, padx=5, pady=0, fill=X)
+        paren_style_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.paren_style_type.pack(side=TOP, padx=10, pady=5)
+        frame_paren2.pack(side=TOP, padx=5, pady=0, fill=X)
+        paren_time_title.pack(side=LEFT, anchor=W, padx=5)
+        self.bell_on.pack(side=RIGHT, anchor=E, padx=15, pady=5)
+        self.paren_flash_time.pack(side=TOP, anchor=W, padx=15, pady=5)
+        # frame_format.
+        frame_format.pack(side=TOP, padx=5, pady=0, fill=X)
+        format_width_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.format_width_int.pack(side=TOP, padx=10, pady=5)
+
+    def load_windows_cfg(self):
+        # Set variables for all windows.
+        self.startup_edit.set(idleConf.GetOption(
+                'main', 'General', 'editor-on-startup', type='bool'))
+        self.win_width.set(idleConf.GetOption(
+                'main', 'EditorWindow', 'width', type='int'))
+        self.win_height.set(idleConf.GetOption(
+                'main', 'EditorWindow', 'height', type='int'))
+        self.indent_spaces.set(idleConf.GetOption(
+                'main', 'Indent', 'num-spaces', type='int'))
+        self.cursor_blink.set(idleConf.GetOption(
+                'main', 'EditorWindow', 'cursor-blink', type='bool'))
+        self.autocomplete_wait.set(idleConf.GetOption(
+                'extensions', 'AutoComplete', 'popupwait', type='int'))
+        self.paren_style.set(idleConf.GetOption(
+                'extensions', 'ParenMatch', 'style'))
+        self.flash_delay.set(idleConf.GetOption(
+                'extensions', 'ParenMatch', 'flash-delay', type='int'))
+        self.paren_bell.set(idleConf.GetOption(
+                'extensions', 'ParenMatch', 'bell'))
+        self.format_width.set(idleConf.GetOption(
+                'extensions', 'FormatParagraph', 'max-width', type='int'))
+
+
+class ShedPage(Frame):
+
+    def __init__(self, master):
+        super().__init__(master)
+
+        self.init_validators()
+        self.create_page_shed()
+        self.load_shelled_cfg()
+
+    def init_validators(self):
+        digits_or_empty_re = re.compile(r'[0-9]*')
+        def is_digits_or_empty(s):
+            "Return 's is blank or contains only digits'"
+            return digits_or_empty_re.fullmatch(s) is not None
+        self.digits_only = (self.register(is_digits_or_empty), '%P',)
+
+    def create_page_shed(self):
+        """Return frame of widgets for Shell/Ed tab.
+
+        Enable users to provisionally change shell and editor options.
+        Function load_shed_cfg initializes tk variables using idleConf.
+        Entry box auto_squeeze_min_lines_int sets
+        auto_squeeze_min_lines_int.  Setting var_name invokes the
+        default callback that adds option to changes.
+
+        Widgets for ShedPage(Frame):  (*) widgets bound to self
+            frame_shell: LabelFrame
+                frame_auto_squeeze_min_lines: Frame
+                    auto_squeeze_min_lines_title: Label
+                    (*)auto_squeeze_min_lines_int: Entry -
+                       auto_squeeze_min_lines
+            frame_editor: LabelFrame
+                frame_save: Frame
+                    run_save_title: Label
+                    (*)save_ask_on: Radiobutton - autosave
+                    (*)save_auto_on: Radiobutton - autosave
+                frame_format: Frame
+                    format_width_title: Label
+                    (*)format_width_int: Entry - format_width
+                frame_line_numbers_default: Frame
+                    line_numbers_default_title: Label
+                    (*)line_numbers_default_bool: Checkbutton - line_numbers_default
+                frame_context: Frame
+                    context_title: Label
+                    (*)context_int: Entry - context_lines
+        """
+        # Integer values need StringVar because int('') raises.
+        self.auto_squeeze_min_lines = tracers.add(
+                StringVar(self), ('main', 'PyShell', 'auto-squeeze-min-lines'))
+
+        self.autosave = tracers.add(
+                IntVar(self), ('main', 'General', 'autosave'))
+        self.line_numbers_default = tracers.add(
+                BooleanVar(self),
+                ('main', 'EditorWindow', 'line-numbers-default'))
+        self.context_lines = tracers.add(
+                StringVar(self), ('extensions', 'CodeContext', 'maxlines'))
+
+        # Create widgets:
+        frame_shell = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                 text=' Shell Preferences')
+        frame_editor = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                                  text=' Editor Preferences')
+        # Frame_shell.
+        frame_auto_squeeze_min_lines = Frame(frame_shell, borderwidth=0)
+        auto_squeeze_min_lines_title = Label(frame_auto_squeeze_min_lines,
+                                             text='Auto-Squeeze Min. Lines:')
+        self.auto_squeeze_min_lines_int = Entry(
+                frame_auto_squeeze_min_lines, width=4,
+                textvariable=self.auto_squeeze_min_lines,
+                validatecommand=self.digits_only, validate='key',
+        )
+        # Frame_editor.
+        frame_save = Frame(frame_editor, borderwidth=0)
+        run_save_title = Label(frame_save, text='At Start of Run (F5)  ')
+
+        self.save_ask_on = Radiobutton(
+                frame_save, variable=self.autosave, value=0,
+                text="Prompt to Save")
+        self.save_auto_on = Radiobutton(
+                frame_save, variable=self.autosave, value=1,
+                text='No Prompt')
+
+        frame_line_numbers_default = Frame(frame_editor, borderwidth=0)
+        line_numbers_default_title = Label(
+            frame_line_numbers_default, text='Show line numbers in new windows')
+        self.line_numbers_default_bool = Checkbutton(
+                frame_line_numbers_default,
+                variable=self.line_numbers_default,
+                width=1)
+
+        frame_context = Frame(frame_editor, borderwidth=0)
+        context_title = Label(frame_context, text='Max Context Lines :')
+        self.context_int = Entry(
+                frame_context, textvariable=self.context_lines, width=3,
+                validatecommand=self.digits_only, validate='key',
+        )
+
+        # Pack widgets:
+        frame_shell.pack(side=TOP, padx=5, pady=5, fill=BOTH)
+        Label(self).pack()  # Spacer -- better solution?
+        frame_editor.pack(side=TOP, padx=5, pady=5, fill=BOTH)
+        # frame_auto_squeeze_min_lines
+        frame_auto_squeeze_min_lines.pack(side=TOP, padx=5, pady=0, fill=X)
+        auto_squeeze_min_lines_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.auto_squeeze_min_lines_int.pack(side=TOP, padx=5, pady=5)
+        # frame_save.
+        frame_save.pack(side=TOP, padx=5, pady=0, fill=X)
+        run_save_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.save_auto_on.pack(side=RIGHT, anchor=W, padx=5, pady=5)
+        self.save_ask_on.pack(side=RIGHT, anchor=W, padx=5, pady=5)
+        # frame_line_numbers_default.
+        frame_line_numbers_default.pack(side=TOP, padx=5, pady=0, fill=X)
+        line_numbers_default_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.line_numbers_default_bool.pack(side=LEFT, padx=5, pady=5)
+        # frame_context.
+        frame_context.pack(side=TOP, padx=5, pady=0, fill=X)
+        context_title.pack(side=LEFT, anchor=W, padx=5, pady=5)
+        self.context_int.pack(side=TOP, padx=5, pady=5)
+
+    def load_shelled_cfg(self):
+        # Set variables for shell windows.
+        self.auto_squeeze_min_lines.set(idleConf.GetOption(
+                'main', 'PyShell', 'auto-squeeze-min-lines', type='int'))
+        # Set variables for editor windows.
+        self.autosave.set(idleConf.GetOption(
+                'main', 'General', 'autosave', default=0, type='bool'))
+        self.line_numbers_default.set(idleConf.GetOption(
+                'main', 'EditorWindow', 'line-numbers-default', type='bool'))
+        self.context_lines.set(idleConf.GetOption(
+                'extensions', 'CodeContext', 'maxlines', type='int'))
+
+
+class ExtPage(Frame):
+    def __init__(self, master):
+        super().__init__(master)
+        self.ext_defaultCfg = idleConf.defaultCfg['extensions']
+        self.ext_userCfg = idleConf.userCfg['extensions']
+        self.is_int = self.register(is_int)
+        self.load_extensions()
+        self.create_page_extensions()  # Requires extension names.
+
+    def create_page_extensions(self):
+        """Configure IDLE feature extensions and help menu extensions.
+
+        List the feature extensions and a configuration box for the
+        selected extension.  Help menu extensions are in a HelpFrame.
+
+        This code reads the current configuration using idleConf,
+        supplies a GUI interface to change the configuration values,
+        and saves the changes using idleConf.
+
+        Some changes may require restarting IDLE.  This depends on each
+        extension's implementation.
+
+        All values are treated as text, and it is up to the user to
+        supply reasonable values. The only exception to this are the
+        'enable*' options, which are boolean, and can be toggled with a
+        True/False button.
+
+        Methods:
+            extension_selected: Handle selection from list.
+            create_extension_frame: Hold widgets for one extension.
+            set_extension_value: Set in userCfg['extensions'].
+            save_all_changed_extensions: Call extension page Save().
+        """
+        self.extension_names = StringVar(self)
+
+        frame_ext = LabelFrame(self, borderwidth=2, relief=GROOVE,
+                               text=' Feature Extensions ')
+        self.frame_help = HelpFrame(self, borderwidth=2, relief=GROOVE,
+                               text=' Help Menu Extensions ')
+
+        frame_ext.rowconfigure(0, weight=1)
+        frame_ext.columnconfigure(2, weight=1)
+        self.extension_list = Listbox(frame_ext, listvariable=self.extension_names,
+                                      selectmode='browse')
+        self.extension_list.bind('<<ListboxSelect>>', self.extension_selected)
+        scroll = Scrollbar(frame_ext, command=self.extension_list.yview)
+        self.extension_list.yscrollcommand=scroll.set
+        self.details_frame = LabelFrame(frame_ext, width=250, height=250)
+        self.extension_list.grid(column=0, row=0, sticky='nws')
+        scroll.grid(column=1, row=0, sticky='ns')
+        self.details_frame.grid(column=2, row=0, sticky='nsew', padx=[10, 0])
+        frame_ext.configure(padding=10)
+        self.config_frame = {}
+        self.current_extension = None
+
+        self.outerframe = self                      # TEMPORARY
+        self.tabbed_page_set = self.extension_list  # TEMPORARY
+
+        # Create the frame holding controls for each extension.
+        ext_names = ''
+        for ext_name in sorted(self.extensions):
+            self.create_extension_frame(ext_name)
+            ext_names = ext_names + '{' + ext_name + '} '
+        self.extension_names.set(ext_names)
+        self.extension_list.selection_set(0)
+        self.extension_selected(None)
+
+
+        frame_ext.grid(row=0, column=0, sticky='nsew')
+        Label(self).grid(row=1, column=0)  # Spacer.  Replace with config?
+        self.frame_help.grid(row=2, column=0, sticky='sew')
+
+    def load_extensions(self):
+        "Fill self.extensions with data from the default and user configs."
+        self.extensions = {}
+        for ext_name in idleConf.GetExtensions(active_only=False):
+            # Former built-in extensions are already filtered out.
+            self.extensions[ext_name] = []
+
+        for ext_name in self.extensions:
+            opt_list = sorted(self.ext_defaultCfg.GetOptionList(ext_name))
+
+            # Bring 'enable' options to the beginning of the list.
+            enables = [opt_name for opt_name in opt_list
+                       if opt_name.startswith('enable')]
+            for opt_name in enables:
+                opt_list.remove(opt_name)
+            opt_list = enables + opt_list
+
+            for opt_name in opt_list:
+                def_str = self.ext_defaultCfg.Get(
+                        ext_name, opt_name, raw=True)
+                try:
+                    def_obj = {'True':True, 'False':False}[def_str]
+                    opt_type = 'bool'
+                except KeyError:
+                    try:
+                        def_obj = int(def_str)
+                        opt_type = 'int'
+                    except ValueError:
+                        def_obj = def_str
+                        opt_type = None
+                try:
+                    value = self.ext_userCfg.Get(
+                            ext_name, opt_name, type=opt_type, raw=True,
+                            default=def_obj)
+                except ValueError:  # Need this until .Get fixed.
+                    value = def_obj  # Bad values overwritten by entry.
+                var = StringVar(self)
+                var.set(str(value))
+
+                self.extensions[ext_name].append({'name': opt_name,
+                                                  'type': opt_type,
+                                                  'default': def_str,
+                                                  'value': value,
+                                                  'var': var,
+                                                 })
+
+    def extension_selected(self, event):
+        "Handle selection of an extension from the list."
+        newsel = self.extension_list.curselection()
+        if newsel:
+            newsel = self.extension_list.get(newsel)
+        if newsel is None or newsel != self.current_extension:
+            if self.current_extension:
+                self.details_frame.config(text='')
+                self.config_frame[self.current_extension].grid_forget()
+                self.current_extension = None
+        if newsel:
+            self.details_frame.config(text=newsel)
+            self.config_frame[newsel].grid(column=0, row=0, sticky='nsew')
+            self.current_extension = newsel
+
+    def create_extension_frame(self, ext_name):
+        """Create a frame holding the widgets to configure one extension"""
+        f = VerticalScrolledFrame(self.details_frame, height=250, width=250)
+        self.config_frame[ext_name] = f
+        entry_area = f.interior
+        # Create an entry for each configuration option.
+        for row, opt in enumerate(self.extensions[ext_name]):
+            # Create a row with a label and entry/checkbutton.
+            label = Label(entry_area, text=opt['name'])
+            label.grid(row=row, column=0, sticky=NW)
+            var = opt['var']
+            if opt['type'] == 'bool':
+                Checkbutton(entry_area, variable=var,
+                            onvalue='True', offvalue='False', width=8
+                            ).grid(row=row, column=1, sticky=W, padx=7)
+            elif opt['type'] == 'int':
+                Entry(entry_area, textvariable=var, validate='key',
+                      validatecommand=(self.is_int, '%P'), width=10
+                      ).grid(row=row, column=1, sticky=NSEW, padx=7)
+
+            else:  # type == 'str'
+                # Limit size to fit non-expanding space with larger font.
+                Entry(entry_area, textvariable=var, width=15
+                      ).grid(row=row, column=1, sticky=NSEW, padx=7)
+        return
+
+    def set_extension_value(self, section, opt):
+        """Return True if the configuration was added or changed.
+
+        If the value is the same as the default, then remove it
+        from user config file.
+        """
+        name = opt['name']
+        default = opt['default']
+        value = opt['var'].get().strip() or default
+        opt['var'].set(value)
+        # if self.defaultCfg.has_section(section):
+        # Currently, always true; if not, indent to return.
+        if (value == default):
+            return self.ext_userCfg.RemoveOption(section, name)
+        # Set the option.
+        return self.ext_userCfg.SetOption(section, name, value)
+
+    def save_all_changed_extensions(self):
+        """Save configuration changes to the user config file.
+
+        Attributes accessed:
+            extensions
+
+        Methods:
+            set_extension_value
+        """
+        has_changes = False
+        for ext_name in self.extensions:
+            options = self.extensions[ext_name]
+            for opt in options:
+                if self.set_extension_value(ext_name, opt):
+                    has_changes = True
+        if has_changes:
+            self.ext_userCfg.Save()
+
+
+class HelpFrame(LabelFrame):
+
+    def __init__(self, master, **cfg):
+        super().__init__(master, **cfg)
+        self.create_frame_help()
+        self.load_helplist()
+
+    def create_frame_help(self):
+        """Create LabelFrame for additional help menu sources.
+
+        load_helplist loads list user_helplist with
+        name, position pairs and copies names to listbox helplist.
+        Clicking a name invokes help_source selected. Clicking
+        button_helplist_name invokes helplist_item_name, which also
+        changes user_helplist.  These functions all call
+        set_add_delete_state. All but load call update_help_changes to
+        rewrite changes['main']['HelpFiles'].
+
+        Widgets for HelpFrame(LabelFrame):  (*) widgets bound to self
+            frame_helplist: Frame
+                (*)helplist: ListBox
+                scroll_helplist: Scrollbar
+            frame_buttons: Frame
+                (*)button_helplist_edit
+                (*)button_helplist_add
+                (*)button_helplist_remove
+        """
+        # self = frame_help in dialog (until ExtPage class).
+        frame_helplist = Frame(self)
+        self.helplist = Listbox(
+                frame_helplist, height=5, takefocus=True,
+                exportselection=FALSE)
+        scroll_helplist = Scrollbar(frame_helplist)
+        scroll_helplist['command'] = self.helplist.yview
+        self.helplist['yscrollcommand'] = scroll_helplist.set
+        self.helplist.bind('<ButtonRelease-1>', self.help_source_selected)
+
+        frame_buttons = Frame(self)
+        self.button_helplist_edit = Button(
+                frame_buttons, text='Edit', state='disabled',
+                width=8, command=self.helplist_item_edit)
+        self.button_helplist_add = Button(
+                frame_buttons, text='Add',
+                width=8, command=self.helplist_item_add)
+        self.button_helplist_remove = Button(
+                frame_buttons, text='Remove', state='disabled',
+                width=8, command=self.helplist_item_remove)
+
+        # Pack frame_help.
+        frame_helplist.pack(side=LEFT, padx=5, pady=5, expand=TRUE, fill=BOTH)
+        self.helplist.pack(side=LEFT, anchor=E, expand=TRUE, fill=BOTH)
+        scroll_helplist.pack(side=RIGHT, anchor=W, fill=Y)
+        frame_buttons.pack(side=RIGHT, padx=5, pady=5, fill=Y)
+        self.button_helplist_edit.pack(side=TOP, anchor=W, pady=5)
+        self.button_helplist_add.pack(side=TOP, anchor=W)
+        self.button_helplist_remove.pack(side=TOP, anchor=W, pady=5)
+
+    def help_source_selected(self, event):
+        "Handle event for selecting additional help."
+        self.set_add_delete_state()
+
+    def set_add_delete_state(self):
+        "Toggle the state for the help list buttons based on list entries."
+        if self.helplist.size() < 1:  # No entries in list.
+            self.button_helplist_edit.state(('disabled',))
+            self.button_helplist_remove.state(('disabled',))
+        else:  # Some entries.
+            if self.helplist.curselection():  # There currently is a selection.
+                self.button_helplist_edit.state(('!disabled',))
+                self.button_helplist_remove.state(('!disabled',))
+            else:  # There currently is not a selection.
+                self.button_helplist_edit.state(('disabled',))
+                self.button_helplist_remove.state(('disabled',))
+
+    def helplist_item_add(self):
+        """Handle add button for the help list.
+
+        Query for name and location of new help sources and add
+        them to the list.
+        """
+        help_source = HelpSource(self, 'New Help Source').result
+        if help_source:
+            self.user_helplist.append(help_source)
+            self.helplist.insert(END, help_source[0])
+            self.update_help_changes()
+
+    def helplist_item_edit(self):
+        """Handle edit button for the help list.
+
+        Query with existing help source information and update
+        config if the values are changed.
+        """
+        item_index = self.helplist.index(ANCHOR)
+        help_source = self.user_helplist[item_index]
+        new_help_source = HelpSource(
+                self, 'Edit Help Source',
+                menuitem=help_source[0],
+                filepath=help_source[1],
+                ).result
+        if new_help_source and new_help_source != help_source:
+            self.user_helplist[item_index] = new_help_source
+            self.helplist.delete(item_index)
+            self.helplist.insert(item_index, new_help_source[0])
+            self.update_help_changes()
+            self.set_add_delete_state()  # Selected will be un-selected
+
+    def helplist_item_remove(self):
+        """Handle remove button for the help list.
+
+        Delete the help list item from config.
+        """
+        item_index = self.helplist.index(ANCHOR)
+        del(self.user_helplist[item_index])
+        self.helplist.delete(item_index)
+        self.update_help_changes()
+        self.set_add_delete_state()
+
+    def update_help_changes(self):
+        "Clear and rebuild the HelpFiles section in changes"
+        changes['main']['HelpFiles'] = {}
+        for num in range(1, len(self.user_helplist) + 1):
+            changes.add_option(
+                    'main', 'HelpFiles', str(num),
+                    ';'.join(self.user_helplist[num-1][:2]))
+
+    def load_helplist(self):
+        # Set additional help sources.
+        self.user_helplist = idleConf.GetAllExtraHelpSourcesList()
+        self.helplist.delete(0, 'end')
+        for help_item in self.user_helplist:
+            self.helplist.insert(END, help_item[0])
+        self.set_add_delete_state()
+
+
+class VarTrace:
+    """Maintain Tk variables trace state."""
+
+    def __init__(self):
+        """Store Tk variables and callbacks.
+
+        untraced: List of tuples (var, callback)
+            that do not have the callback attached
+            to the Tk var.
+        traced: List of tuples (var, callback) where
+            that callback has been attached to the var.
+        """
+        self.untraced = []
+        self.traced = []
+
+    def clear(self):
+        "Clear lists (for tests)."
+        # Call after all tests in a module to avoid memory leaks.
+        self.untraced.clear()
+        self.traced.clear()
+
+    def add(self, var, callback):
+        """Add (var, callback) tuple to untraced list.
+
+        Args:
+            var: Tk variable instance.
+            callback: Either function name to be used as a callback
+                or a tuple with IdleConf config-type, section, and
+                option names used in the default callback.
+
+        Return:
+            Tk variable instance.
+        """
+        if isinstance(callback, tuple):
+            callback = self.make_callback(var, callback)
+        self.untraced.append((var, callback))
+        return var
+
+    @staticmethod
+    def make_callback(var, config):
+        "Return default callback function to add values to changes instance."
+        def default_callback(*params):
+            "Add config values to changes instance."
+            changes.add_option(*config, var.get())
+        return default_callback
+
+    def attach(self):
+        "Attach callback to all vars that are not traced."
+        while self.untraced:
+            var, callback = self.untraced.pop()
+            var.trace_add('write', callback)
+            self.traced.append((var, callback))
+
+    def detach(self):
+        "Remove callback from traced vars."
+        while self.traced:
+            var, callback = self.traced.pop()
+            var.trace_remove('write', var.trace_info()[0][1])
+            self.untraced.append((var, callback))
+
+
+tracers = VarTrace()
+
+help_common = '''\
+When you click either the Apply or Ok buttons, settings in this
+dialog that are different from IDLE's default are saved in
+a .idlerc directory in your home directory. Except as noted,
+these changes apply to all versions of IDLE installed on this
+machine. [Cancel] only cancels changes made since the last save.
+'''
+help_pages = {
+    'Fonts/Tabs':'''
+Font sample: This shows what a selection of Basic Multilingual Plane
+unicode characters look like for the current font selection.  If the
+selected font does not define a character, Tk attempts to find another
+font that does.  Substitute glyphs depend on what is available on a
+particular system and will not necessarily have the same size as the
+font selected.  Line contains 20 characters up to Devanagari, 14 for
+Tamil, and 10 for East Asia.
+
+Hebrew and Arabic letters should display right to left, starting with
+alef, \u05d0 and \u0627.  Arabic digits display left to right.  The
+Devanagari and Tamil lines start with digits.  The East Asian lines
+are Chinese digits, Chinese Hanzi, Korean Hangul, and Japanese
+Hiragana and Katakana.
+
+You can edit the font sample. Changes remain until IDLE is closed.
+''',
+    'Highlights': '''
+Highlighting:
+The IDLE Dark color theme is new in October 2015.  It can only
+be used with older IDLE releases if it is saved as a custom
+theme, with a different name.
+''',
+    'Keys': '''
+Keys:
+The IDLE Modern Unix key set is new in June 2016.  It can only
+be used with older IDLE releases if it is saved as a custom
+key set, with a different name.
+''',
+     'General': '''
+General:
+
+AutoComplete: Popupwait is milliseconds to wait after key char, without
+cursor movement, before popping up completion box.  Key char is '.' after
+identifier or a '/' (or '\\' on Windows) within a string.
+
+FormatParagraph: Max-width is max chars in lines after re-formatting.
+Use with paragraphs in both strings and comment blocks.
+
+ParenMatch: Style indicates what is highlighted when closer is entered:
+'opener' - opener '({[' corresponding to closer; 'parens' - both chars;
+'expression' (default) - also everything in between.  Flash-delay is how
+long to highlight if cursor is not moved (0 means forever).
+
+CodeContext: Maxlines is the maximum number of code context lines to
+display when Code Context is turned on for an editor window.
+
+Shell Preferences: Auto-Squeeze Min. Lines is the minimum number of lines
+of output to automatically "squeeze".
+''',
+    'Extensions': '''
+ZzDummy: This extension is provided as an example for how to create and
+use an extension.  Enable indicates whether the extension is active or
+not; likewise enable_editor and enable_shell indicate which windows it
+will be active on.  For this extension, z-text is the text that will be
+inserted at or removed from the beginning of the lines of selected text,
+or the current line if no selection.
+''',
+}
+
+
+def is_int(s):
+    "Return 's is blank or represents an int'"
+    if not s:
+        return True
+    try:
+        int(s)
+        return True
+    except ValueError:
+        return False
+
+
+class VerticalScrolledFrame(Frame):
+    """A pure Tkinter vertically scrollable frame.
+
+    * Use the 'interior' attribute to place widgets inside the scrollable frame
+    * Construct and pack/place/grid normally
+    * This frame only allows vertical scrolling
+    """
+    def __init__(self, parent, *args, **kw):
+        Frame.__init__(self, parent, *args, **kw)
+
+        # Create a canvas object and a vertical scrollbar for scrolling it.
+        vscrollbar = Scrollbar(self, orient=VERTICAL)
+        vscrollbar.pack(fill=Y, side=RIGHT, expand=FALSE)
+        canvas = Canvas(self, borderwidth=0, highlightthickness=0,
+                        yscrollcommand=vscrollbar.set, width=240)
+        canvas.pack(side=LEFT, fill=BOTH, expand=TRUE)
+        vscrollbar.config(command=canvas.yview)
+
+        # Reset the view.
+        canvas.xview_moveto(0)
+        canvas.yview_moveto(0)
+
+        # Create a frame inside the canvas which will be scrolled with it.
+        self.interior = interior = Frame(canvas)
+        interior_id = canvas.create_window(0, 0, window=interior, anchor=NW)
+
+        # Track changes to the canvas and frame width and sync them,
+        # also updating the scrollbar.
+        def _configure_interior(event):
+            # Update the scrollbars to match the size of the inner frame.
+            size = (interior.winfo_reqwidth(), interior.winfo_reqheight())
+            canvas.config(scrollregion="0 0 %s %s" % size)
+        interior.bind('<Configure>', _configure_interior)
+
+        def _configure_canvas(event):
+            if interior.winfo_reqwidth() != canvas.winfo_width():
+                # Update the inner frame's width to fill the canvas.
+                canvas.itemconfigure(interior_id, width=canvas.winfo_width())
+        canvas.bind('<Configure>', _configure_canvas)
+
+        return
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_configdialog', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(ConfigDialog)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger.py
new file mode 100644
index 0000000000000000000000000000000000000000..1fae1d4b0adbd753c102aab46593e7714c83f86c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger.py
@@ -0,0 +1,602 @@
+"""Debug user code with a GUI interface to a subclass of bdb.Bdb.
+
+The Idb instance 'idb' and Debugger instance 'gui' need references to each
+other or to an rpc proxy for each other.
+
+If IDLE is started with '-n', so that user code and idb both run in the
+IDLE process, Debugger is called without an idb.  Debugger.__init__
+calls Idb with its incomplete self.  Idb.__init__ stores gui and gui
+then stores idb.
+
+If IDLE is started normally, so that user code executes in a separate
+process, debugger_r.start_remote_debugger is called, executing in the
+IDLE process.  It calls 'start the debugger' in the remote process,
+which calls Idb with a gui proxy.  Then Debugger is called in the IDLE
+for more.
+"""
+
+import bdb
+import os
+
+from tkinter import *
+from tkinter.ttk import Frame, Scrollbar
+
+from idlelib import macosx
+from idlelib.scrolledlist import ScrolledList
+from idlelib.window import ListedToplevel
+
+
+class Idb(bdb.Bdb):
+    "Supply user_line and user_exception functions for Bdb."
+
+    def __init__(self, gui):
+        self.gui = gui  # An instance of Debugger or proxy thereof.
+        super().__init__()
+
+    def user_line(self, frame):
+        """Handle a user stopping or breaking at a line.
+
+        Convert frame to a string and send it to gui.
+        """
+        if _in_rpc_code(frame):
+            self.set_step()
+            return
+        message = _frame2message(frame)
+        try:
+            self.gui.interaction(message, frame)
+        except TclError:  # When closing debugger window with [x] in 3.x
+            pass
+
+    def user_exception(self, frame, exc_info):
+        """Handle an the occurrence of an exception."""
+        if _in_rpc_code(frame):
+            self.set_step()
+            return
+        message = _frame2message(frame)
+        self.gui.interaction(message, frame, exc_info)
+
+def _in_rpc_code(frame):
+    "Determine if debugger is within RPC code."
+    if frame.f_code.co_filename.count('rpc.py'):
+        return True  # Skip this frame.
+    else:
+        prev_frame = frame.f_back
+        if prev_frame is None:
+            return False
+        prev_name = prev_frame.f_code.co_filename
+        if 'idlelib' in prev_name and 'debugger' in prev_name:
+            # catch both idlelib/debugger.py and idlelib/debugger_r.py
+            # on both Posix and Windows
+            return False
+        return _in_rpc_code(prev_frame)
+
+def _frame2message(frame):
+    """Return a message string for frame."""
+    code = frame.f_code
+    filename = code.co_filename
+    lineno = frame.f_lineno
+    basename = os.path.basename(filename)
+    message = f"{basename}:{lineno}"
+    if code.co_name != "?":
+        message = f"{message}: {code.co_name}()"
+    return message
+
+
+class Debugger:
+    """The debugger interface.
+
+    This class handles the drawing of the debugger window and
+    the interactions with the underlying debugger session.
+    """
+    vstack = None
+    vsource = None
+    vlocals = None
+    vglobals = None
+    stackviewer = None
+    localsviewer = None
+    globalsviewer = None
+
+    def __init__(self, pyshell, idb=None):
+        """Instantiate and draw a debugger window.
+
+        :param pyshell: An instance of the PyShell Window
+        :type  pyshell: :class:`idlelib.pyshell.PyShell`
+
+        :param idb: An instance of the IDLE debugger (optional)
+        :type  idb: :class:`idlelib.debugger.Idb`
+        """
+        if idb is None:
+            idb = Idb(self)
+        self.pyshell = pyshell
+        self.idb = idb  # If passed, a proxy of remote instance.
+        self.frame = None
+        self.make_gui()
+        self.interacting = False
+        self.nesting_level = 0
+
+    def run(self, *args):
+        """Run the debugger."""
+        # Deal with the scenario where we've already got a program running
+        # in the debugger and we want to start another. If that is the case,
+        # our second 'run' was invoked from an event dispatched not from
+        # the main event loop, but from the nested event loop in 'interaction'
+        # below. So our stack looks something like this:
+        #       outer main event loop
+        #         run()
+        #           <running program with traces>
+        #             callback to debugger's interaction()
+        #               nested event loop
+        #                 run() for second command
+        #
+        # This kind of nesting of event loops causes all kinds of problems
+        # (see e.g. issue #24455) especially when dealing with running as a
+        # subprocess, where there's all kinds of extra stuff happening in
+        # there - insert a traceback.print_stack() to check it out.
+        #
+        # By this point, we've already called restart_subprocess() in
+        # ScriptBinding. However, we also need to unwind the stack back to
+        # that outer event loop.  To accomplish this, we:
+        #   - return immediately from the nested run()
+        #   - abort_loop ensures the nested event loop will terminate
+        #   - the debugger's interaction routine completes normally
+        #   - the restart_subprocess() will have taken care of stopping
+        #     the running program, which will also let the outer run complete
+        #
+        # That leaves us back at the outer main event loop, at which point our
+        # after event can fire, and we'll come back to this routine with a
+        # clean stack.
+        if self.nesting_level > 0:
+            self.abort_loop()
+            self.root.after(100, lambda: self.run(*args))
+            return
+        try:
+            self.interacting = True
+            return self.idb.run(*args)
+        finally:
+            self.interacting = False
+
+    def close(self, event=None):
+        """Close the debugger and window."""
+        try:
+            self.quit()
+        except Exception:
+            pass
+        if self.interacting:
+            self.top.bell()
+            return
+        if self.stackviewer:
+            self.stackviewer.close(); self.stackviewer = None
+        # Clean up pyshell if user clicked debugger control close widget.
+        # (Causes a harmless extra cycle through close_debugger() if user
+        # toggled debugger from pyshell Debug menu)
+        self.pyshell.close_debugger()
+        # Now close the debugger control window....
+        self.top.destroy()
+
+    def make_gui(self):
+        """Draw the debugger gui on the screen."""
+        pyshell = self.pyshell
+        self.flist = pyshell.flist
+        self.root = root = pyshell.root
+        self.top = top = ListedToplevel(root)
+        self.top.wm_title("Debug Control")
+        self.top.wm_iconname("Debug")
+        top.wm_protocol("WM_DELETE_WINDOW", self.close)
+        self.top.bind("<Escape>", self.close)
+
+        self.bframe = bframe = Frame(top)
+        self.bframe.pack(anchor="w")
+        self.buttons = bl = []
+
+        self.bcont = b = Button(bframe, text="Go", command=self.cont)
+        bl.append(b)
+        self.bstep = b = Button(bframe, text="Step", command=self.step)
+        bl.append(b)
+        self.bnext = b = Button(bframe, text="Over", command=self.next)
+        bl.append(b)
+        self.bret = b = Button(bframe, text="Out", command=self.ret)
+        bl.append(b)
+        self.bret = b = Button(bframe, text="Quit", command=self.quit)
+        bl.append(b)
+
+        for b in bl:
+            b.configure(state="disabled")
+            b.pack(side="left")
+
+        self.cframe = cframe = Frame(bframe)
+        self.cframe.pack(side="left")
+
+        if not self.vstack:
+            self.__class__.vstack = BooleanVar(top)
+            self.vstack.set(1)
+        self.bstack = Checkbutton(cframe,
+            text="Stack", command=self.show_stack, variable=self.vstack)
+        self.bstack.grid(row=0, column=0)
+        if not self.vsource:
+            self.__class__.vsource = BooleanVar(top)
+        self.bsource = Checkbutton(cframe,
+            text="Source", command=self.show_source, variable=self.vsource)
+        self.bsource.grid(row=0, column=1)
+        if not self.vlocals:
+            self.__class__.vlocals = BooleanVar(top)
+            self.vlocals.set(1)
+        self.blocals = Checkbutton(cframe,
+            text="Locals", command=self.show_locals, variable=self.vlocals)
+        self.blocals.grid(row=1, column=0)
+        if not self.vglobals:
+            self.__class__.vglobals = BooleanVar(top)
+        self.bglobals = Checkbutton(cframe,
+            text="Globals", command=self.show_globals, variable=self.vglobals)
+        self.bglobals.grid(row=1, column=1)
+
+        self.status = Label(top, anchor="w")
+        self.status.pack(anchor="w")
+        self.error = Label(top, anchor="w")
+        self.error.pack(anchor="w", fill="x")
+        self.errorbg = self.error.cget("background")
+
+        self.fstack = Frame(top, height=1)
+        self.fstack.pack(expand=1, fill="both")
+        self.flocals = Frame(top)
+        self.flocals.pack(expand=1, fill="both")
+        self.fglobals = Frame(top, height=1)
+        self.fglobals.pack(expand=1, fill="both")
+
+        if self.vstack.get():
+            self.show_stack()
+        if self.vlocals.get():
+            self.show_locals()
+        if self.vglobals.get():
+            self.show_globals()
+
+    def interaction(self, message, frame, info=None):
+        self.frame = frame
+        self.status.configure(text=message)
+
+        if info:
+            type, value, tb = info
+            try:
+                m1 = type.__name__
+            except AttributeError:
+                m1 = "%s" % str(type)
+            if value is not None:
+                try:
+                   # TODO redo entire section, tries not needed.
+                    m1 = f"{m1}: {value}"
+                except:
+                    pass
+            bg = "yellow"
+        else:
+            m1 = ""
+            tb = None
+            bg = self.errorbg
+        self.error.configure(text=m1, background=bg)
+
+        sv = self.stackviewer
+        if sv:
+            stack, i = self.idb.get_stack(self.frame, tb)
+            sv.load_stack(stack, i)
+
+        self.show_variables(1)
+
+        if self.vsource.get():
+            self.sync_source_line()
+
+        for b in self.buttons:
+            b.configure(state="normal")
+
+        self.top.wakeup()
+        # Nested main loop: Tkinter's main loop is not reentrant, so use
+        # Tcl's vwait facility, which reenters the event loop until an
+        # event handler sets the variable we're waiting on.
+        self.nesting_level += 1
+        self.root.tk.call('vwait', '::idledebugwait')
+        self.nesting_level -= 1
+
+        for b in self.buttons:
+            b.configure(state="disabled")
+        self.status.configure(text="")
+        self.error.configure(text="", background=self.errorbg)
+        self.frame = None
+
+    def sync_source_line(self):
+        frame = self.frame
+        if not frame:
+            return
+        filename, lineno = self.__frame2fileline(frame)
+        if filename[:1] + filename[-1:] != "<>" and os.path.exists(filename):
+            self.flist.gotofileline(filename, lineno)
+
+    def __frame2fileline(self, frame):
+        code = frame.f_code
+        filename = code.co_filename
+        lineno = frame.f_lineno
+        return filename, lineno
+
+    def cont(self):
+        self.idb.set_continue()
+        self.abort_loop()
+
+    def step(self):
+        self.idb.set_step()
+        self.abort_loop()
+
+    def next(self):
+        self.idb.set_next(self.frame)
+        self.abort_loop()
+
+    def ret(self):
+        self.idb.set_return(self.frame)
+        self.abort_loop()
+
+    def quit(self):
+        self.idb.set_quit()
+        self.abort_loop()
+
+    def abort_loop(self):
+        self.root.tk.call('set', '::idledebugwait', '1')
+
+    def show_stack(self):
+        if not self.stackviewer and self.vstack.get():
+            self.stackviewer = sv = StackViewer(self.fstack, self.flist, self)
+            if self.frame:
+                stack, i = self.idb.get_stack(self.frame, None)
+                sv.load_stack(stack, i)
+        else:
+            sv = self.stackviewer
+            if sv and not self.vstack.get():
+                self.stackviewer = None
+                sv.close()
+            self.fstack['height'] = 1
+
+    def show_source(self):
+        if self.vsource.get():
+            self.sync_source_line()
+
+    def show_frame(self, stackitem):
+        self.frame = stackitem[0]  # lineno is stackitem[1]
+        self.show_variables()
+
+    def show_locals(self):
+        lv = self.localsviewer
+        if self.vlocals.get():
+            if not lv:
+                self.localsviewer = NamespaceViewer(self.flocals, "Locals")
+        else:
+            if lv:
+                self.localsviewer = None
+                lv.close()
+                self.flocals['height'] = 1
+        self.show_variables()
+
+    def show_globals(self):
+        gv = self.globalsviewer
+        if self.vglobals.get():
+            if not gv:
+                self.globalsviewer = NamespaceViewer(self.fglobals, "Globals")
+        else:
+            if gv:
+                self.globalsviewer = None
+                gv.close()
+                self.fglobals['height'] = 1
+        self.show_variables()
+
+    def show_variables(self, force=0):
+        lv = self.localsviewer
+        gv = self.globalsviewer
+        frame = self.frame
+        if not frame:
+            ldict = gdict = None
+        else:
+            ldict = frame.f_locals
+            gdict = frame.f_globals
+            if lv and gv and ldict is gdict:
+                ldict = None
+        if lv:
+            lv.load_dict(ldict, force, self.pyshell.interp.rpcclt)
+        if gv:
+            gv.load_dict(gdict, force, self.pyshell.interp.rpcclt)
+
+    def set_breakpoint(self, filename, lineno):
+        """Set a filename-lineno breakpoint in the debugger.
+
+        Called from self.load_breakpoints and EW.setbreakpoint
+        """
+        self.idb.set_break(filename, lineno)
+
+    def clear_breakpoint(self, filename, lineno):
+        self.idb.clear_break(filename, lineno)
+
+    def clear_file_breaks(self, filename):
+        self.idb.clear_all_file_breaks(filename)
+
+    def load_breakpoints(self):
+        """Load PyShellEditorWindow breakpoints into subprocess debugger."""
+        for editwin in self.pyshell.flist.inversedict:
+            filename = editwin.io.filename
+            try:
+                for lineno in editwin.breakpoints:
+                    self.set_breakpoint(filename, lineno)
+            except AttributeError:
+                continue
+
+
+class StackViewer(ScrolledList):
+    "Code stack viewer for debugger GUI."
+
+    def __init__(self, master, flist, gui):
+        if macosx.isAquaTk():
+            # At least on with the stock AquaTk version on OSX 10.4 you'll
+            # get a shaking GUI that eventually kills IDLE if the width
+            # argument is specified.
+            ScrolledList.__init__(self, master)
+        else:
+            ScrolledList.__init__(self, master, width=80)
+        self.flist = flist
+        self.gui = gui
+        self.stack = []
+
+    def load_stack(self, stack, index=None):
+        self.stack = stack
+        self.clear()
+        for i in range(len(stack)):
+            frame, lineno = stack[i]
+            try:
+                modname = frame.f_globals["__name__"]
+            except:
+                modname = "?"
+            code = frame.f_code
+            filename = code.co_filename
+            funcname = code.co_name
+            import linecache
+            sourceline = linecache.getline(filename, lineno)
+            sourceline = sourceline.strip()
+            if funcname in ("?", "", None):
+                item = "%s, line %d: %s" % (modname, lineno, sourceline)
+            else:
+                item = "%s.%s(), line %d: %s" % (modname, funcname,
+                                                 lineno, sourceline)
+            if i == index:
+                item = "> " + item
+            self.append(item)
+        if index is not None:
+            self.select(index)
+
+    def popup_event(self, event):
+        "Override base method."
+        if self.stack:
+            return ScrolledList.popup_event(self, event)
+
+    def fill_menu(self):
+        "Override base method."
+        menu = self.menu
+        menu.add_command(label="Go to source line",
+                         command=self.goto_source_line)
+        menu.add_command(label="Show stack frame",
+                         command=self.show_stack_frame)
+
+    def on_select(self, index):
+        "Override base method."
+        if 0 <= index < len(self.stack):
+            self.gui.show_frame(self.stack[index])
+
+    def on_double(self, index):
+        "Override base method."
+        self.show_source(index)
+
+    def goto_source_line(self):
+        index = self.listbox.index("active")
+        self.show_source(index)
+
+    def show_stack_frame(self):
+        index = self.listbox.index("active")
+        if 0 <= index < len(self.stack):
+            self.gui.show_frame(self.stack[index])
+
+    def show_source(self, index):
+        if not (0 <= index < len(self.stack)):
+            return
+        frame, lineno = self.stack[index]
+        code = frame.f_code
+        filename = code.co_filename
+        if os.path.isfile(filename):
+            edit = self.flist.open(filename)
+            if edit:
+                edit.gotoline(lineno)
+
+
+class NamespaceViewer:
+    "Global/local namespace viewer for debugger GUI."
+
+    def __init__(self, master, title, odict=None):  # XXX odict never passed.
+        width = 0
+        height = 40
+        if odict:
+            height = 20*len(odict) # XXX 20 == observed height of Entry widget
+        self.master = master
+        self.title = title
+        import reprlib
+        self.repr = reprlib.Repr()
+        self.repr.maxstring = 60
+        self.repr.maxother = 60
+        self.frame = frame = Frame(master)
+        self.frame.pack(expand=1, fill="both")
+        self.label = Label(frame, text=title, borderwidth=2, relief="groove")
+        self.label.pack(fill="x")
+        self.vbar = vbar = Scrollbar(frame, name="vbar")
+        vbar.pack(side="right", fill="y")
+        self.canvas = canvas = Canvas(frame,
+                                      height=min(300, max(40, height)),
+                                      scrollregion=(0, 0, width, height))
+        canvas.pack(side="left", fill="both", expand=1)
+        vbar["command"] = canvas.yview
+        canvas["yscrollcommand"] = vbar.set
+        self.subframe = subframe = Frame(canvas)
+        self.sfid = canvas.create_window(0, 0, window=subframe, anchor="nw")
+        self.load_dict(odict)
+
+    prev_odict = -1  # Needed for initial comparison below.
+
+    def load_dict(self, odict, force=0, rpc_client=None):
+        if odict is self.prev_odict and not force:
+            return
+        subframe = self.subframe
+        frame = self.frame
+        for c in list(subframe.children.values()):
+            c.destroy()
+        self.prev_odict = None
+        if not odict:
+            l = Label(subframe, text="None")
+            l.grid(row=0, column=0)
+        else:
+            #names = sorted(dict)
+            #
+            # Because of (temporary) limitations on the dict_keys type (not yet
+            # public or pickleable), have the subprocess to send a list of
+            # keys, not a dict_keys object.  sorted() will take a dict_keys
+            # (no subprocess) or a list.
+            #
+            # There is also an obscure bug in sorted(dict) where the
+            # interpreter gets into a loop requesting non-existing dict[0],
+            # dict[1], dict[2], etc from the debugger_r.DictProxy.
+            # TODO recheck above; see debugger_r 159ff, debugobj 60.
+            keys_list = odict.keys()
+            names = sorted(keys_list)
+
+            row = 0
+            for name in names:
+                value = odict[name]
+                svalue = self.repr.repr(value) # repr(value)
+                # Strip extra quotes caused by calling repr on the (already)
+                # repr'd value sent across the RPC interface:
+                if rpc_client:
+                    svalue = svalue[1:-1]
+                l = Label(subframe, text=name)
+                l.grid(row=row, column=0, sticky="nw")
+                l = Entry(subframe, width=0, borderwidth=0)
+                l.insert(0, svalue)
+                l.grid(row=row, column=1, sticky="nw")
+                row = row+1
+        self.prev_odict = odict
+        # XXX Could we use a <Configure> callback for the following?
+        subframe.update_idletasks() # Alas!
+        width = subframe.winfo_reqwidth()
+        height = subframe.winfo_reqheight()
+        canvas = self.canvas
+        self.canvas["scrollregion"] = (0, 0, width, height)
+        if height > 300:
+            canvas["height"] = 300
+            frame.pack(expand=1)
+        else:
+            canvas["height"] = height
+            frame.pack(expand=0)
+
+    def close(self):
+        self.frame.destroy()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_debugger', verbosity=2, exit=False)
+
+# TODO: htest?
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger_r.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger_r.py
new file mode 100644
index 0000000000000000000000000000000000000000..ad3355d9f82765a4e46347d0a1b3d846c8afac08
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugger_r.py
@@ -0,0 +1,390 @@
+"""Support for remote Python debugging.
+
+Some ASCII art to describe the structure:
+
+       IN PYTHON SUBPROCESS          #             IN IDLE PROCESS
+                                     #
+                                     #        oid='gui_adapter'
+                 +----------+        #       +------------+          +-----+
+                 | GUIProxy |--remote#call-->| GUIAdapter |--calls-->| GUI |
++-----+--calls-->+----------+        #       +------------+          +-----+
+| Idb |                               #                             /
++-----+<-calls--+------------+         #      +----------+<--calls-/
+                | IdbAdapter |<--remote#call--| IdbProxy |
+                +------------+         #      +----------+
+                oid='idb_adapter'      #
+
+The purpose of the Proxy and Adapter classes is to translate certain
+arguments and return values that cannot be transported through the RPC
+barrier, in particular frame and traceback objects.
+
+"""
+import reprlib
+import types
+from idlelib import debugger
+
+debugging = 0
+
+idb_adap_oid = "idb_adapter"
+gui_adap_oid = "gui_adapter"
+
+#=======================================
+#
+# In the PYTHON subprocess:
+
+frametable = {}
+dicttable = {}
+codetable = {}
+tracebacktable = {}
+
+def wrap_frame(frame):
+    fid = id(frame)
+    frametable[fid] = frame
+    return fid
+
+def wrap_info(info):
+    "replace info[2], a traceback instance, by its ID"
+    if info is None:
+        return None
+    else:
+        traceback = info[2]
+        assert isinstance(traceback, types.TracebackType)
+        traceback_id = id(traceback)
+        tracebacktable[traceback_id] = traceback
+        modified_info = (info[0], info[1], traceback_id)
+        return modified_info
+
+class GUIProxy:
+
+    def __init__(self, conn, gui_adap_oid):
+        self.conn = conn
+        self.oid = gui_adap_oid
+
+    def interaction(self, message, frame, info=None):
+        # calls rpc.SocketIO.remotecall() via run.MyHandler instance
+        # pass frame and traceback object IDs instead of the objects themselves
+        self.conn.remotecall(self.oid, "interaction",
+                             (message, wrap_frame(frame), wrap_info(info)),
+                             {})
+
+class IdbAdapter:
+
+    def __init__(self, idb):
+        self.idb = idb
+
+    #----------called by an IdbProxy----------
+
+    def set_step(self):
+        self.idb.set_step()
+
+    def set_quit(self):
+        self.idb.set_quit()
+
+    def set_continue(self):
+        self.idb.set_continue()
+
+    def set_next(self, fid):
+        frame = frametable[fid]
+        self.idb.set_next(frame)
+
+    def set_return(self, fid):
+        frame = frametable[fid]
+        self.idb.set_return(frame)
+
+    def get_stack(self, fid, tbid):
+        frame = frametable[fid]
+        if tbid is None:
+            tb = None
+        else:
+            tb = tracebacktable[tbid]
+        stack, i = self.idb.get_stack(frame, tb)
+        stack = [(wrap_frame(frame2), k) for frame2, k in stack]
+        return stack, i
+
+    def run(self, cmd):
+        import __main__
+        self.idb.run(cmd, __main__.__dict__)
+
+    def set_break(self, filename, lineno):
+        msg = self.idb.set_break(filename, lineno)
+        return msg
+
+    def clear_break(self, filename, lineno):
+        msg = self.idb.clear_break(filename, lineno)
+        return msg
+
+    def clear_all_file_breaks(self, filename):
+        msg = self.idb.clear_all_file_breaks(filename)
+        return msg
+
+    #----------called by a FrameProxy----------
+
+    def frame_attr(self, fid, name):
+        frame = frametable[fid]
+        return getattr(frame, name)
+
+    def frame_globals(self, fid):
+        frame = frametable[fid]
+        gdict = frame.f_globals
+        did = id(gdict)
+        dicttable[did] = gdict
+        return did
+
+    def frame_locals(self, fid):
+        frame = frametable[fid]
+        ldict = frame.f_locals
+        did = id(ldict)
+        dicttable[did] = ldict
+        return did
+
+    def frame_code(self, fid):
+        frame = frametable[fid]
+        code = frame.f_code
+        cid = id(code)
+        codetable[cid] = code
+        return cid
+
+    #----------called by a CodeProxy----------
+
+    def code_name(self, cid):
+        code = codetable[cid]
+        return code.co_name
+
+    def code_filename(self, cid):
+        code = codetable[cid]
+        return code.co_filename
+
+    #----------called by a DictProxy----------
+
+    def dict_keys(self, did):
+        raise NotImplementedError("dict_keys not public or pickleable")
+##         return dicttable[did].keys()
+
+    ### Needed until dict_keys type is finished and pickleable.
+    # xxx finished. pickleable?
+    ### Will probably need to extend rpc.py:SocketIO._proxify at that time.
+    def dict_keys_list(self, did):
+        return list(dicttable[did].keys())
+
+    def dict_item(self, did, key):
+        value = dicttable[did][key]
+        return reprlib.repr(value) # Can't pickle module 'builtins'.
+
+#----------end class IdbAdapter----------
+
+
+def start_debugger(rpchandler, gui_adap_oid):
+    """Start the debugger and its RPC link in the Python subprocess
+
+    Start the subprocess side of the split debugger and set up that side of the
+    RPC link by instantiating the GUIProxy, Idb debugger, and IdbAdapter
+    objects and linking them together.  Register the IdbAdapter with the
+    RPCServer to handle RPC requests from the split debugger GUI via the
+    IdbProxy.
+
+    """
+    gui_proxy = GUIProxy(rpchandler, gui_adap_oid)
+    idb = debugger.Idb(gui_proxy)
+    idb_adap = IdbAdapter(idb)
+    rpchandler.register(idb_adap_oid, idb_adap)
+    return idb_adap_oid
+
+
+#=======================================
+#
+# In the IDLE process:
+
+
+class FrameProxy:
+
+    def __init__(self, conn, fid):
+        self._conn = conn
+        self._fid = fid
+        self._oid = "idb_adapter"
+        self._dictcache = {}
+
+    def __getattr__(self, name):
+        if name[:1] == "_":
+            raise AttributeError(name)
+        if name == "f_code":
+            return self._get_f_code()
+        if name == "f_globals":
+            return self._get_f_globals()
+        if name == "f_locals":
+            return self._get_f_locals()
+        return self._conn.remotecall(self._oid, "frame_attr",
+                                     (self._fid, name), {})
+
+    def _get_f_code(self):
+        cid = self._conn.remotecall(self._oid, "frame_code", (self._fid,), {})
+        return CodeProxy(self._conn, self._oid, cid)
+
+    def _get_f_globals(self):
+        did = self._conn.remotecall(self._oid, "frame_globals",
+                                    (self._fid,), {})
+        return self._get_dict_proxy(did)
+
+    def _get_f_locals(self):
+        did = self._conn.remotecall(self._oid, "frame_locals",
+                                    (self._fid,), {})
+        return self._get_dict_proxy(did)
+
+    def _get_dict_proxy(self, did):
+        if did in self._dictcache:
+            return self._dictcache[did]
+        dp = DictProxy(self._conn, self._oid, did)
+        self._dictcache[did] = dp
+        return dp
+
+
+class CodeProxy:
+
+    def __init__(self, conn, oid, cid):
+        self._conn = conn
+        self._oid = oid
+        self._cid = cid
+
+    def __getattr__(self, name):
+        if name == "co_name":
+            return self._conn.remotecall(self._oid, "code_name",
+                                         (self._cid,), {})
+        if name == "co_filename":
+            return self._conn.remotecall(self._oid, "code_filename",
+                                         (self._cid,), {})
+
+
+class DictProxy:
+
+    def __init__(self, conn, oid, did):
+        self._conn = conn
+        self._oid = oid
+        self._did = did
+
+##    def keys(self):
+##        return self._conn.remotecall(self._oid, "dict_keys", (self._did,), {})
+
+    # 'temporary' until dict_keys is a pickleable built-in type
+    def keys(self):
+        return self._conn.remotecall(self._oid,
+                                     "dict_keys_list", (self._did,), {})
+
+    def __getitem__(self, key):
+        return self._conn.remotecall(self._oid, "dict_item",
+                                     (self._did, key), {})
+
+    def __getattr__(self, name):
+        ##print("*** Failed DictProxy.__getattr__:", name)
+        raise AttributeError(name)
+
+
+class GUIAdapter:
+
+    def __init__(self, conn, gui):
+        self.conn = conn
+        self.gui = gui
+
+    def interaction(self, message, fid, modified_info):
+        ##print("*** Interaction: (%s, %s, %s)" % (message, fid, modified_info))
+        frame = FrameProxy(self.conn, fid)
+        self.gui.interaction(message, frame, modified_info)
+
+
+class IdbProxy:
+
+    def __init__(self, conn, shell, oid):
+        self.oid = oid
+        self.conn = conn
+        self.shell = shell
+
+    def call(self, methodname, /, *args, **kwargs):
+        ##print("*** IdbProxy.call %s %s %s" % (methodname, args, kwargs))
+        value = self.conn.remotecall(self.oid, methodname, args, kwargs)
+        ##print("*** IdbProxy.call %s returns %r" % (methodname, value))
+        return value
+
+    def run(self, cmd, locals):
+        # Ignores locals on purpose!
+        seq = self.conn.asyncqueue(self.oid, "run", (cmd,), {})
+        self.shell.interp.active_seq = seq
+
+    def get_stack(self, frame, tbid):
+        # passing frame and traceback IDs, not the objects themselves
+        stack, i = self.call("get_stack", frame._fid, tbid)
+        stack = [(FrameProxy(self.conn, fid), k) for fid, k in stack]
+        return stack, i
+
+    def set_continue(self):
+        self.call("set_continue")
+
+    def set_step(self):
+        self.call("set_step")
+
+    def set_next(self, frame):
+        self.call("set_next", frame._fid)
+
+    def set_return(self, frame):
+        self.call("set_return", frame._fid)
+
+    def set_quit(self):
+        self.call("set_quit")
+
+    def set_break(self, filename, lineno):
+        msg = self.call("set_break", filename, lineno)
+        return msg
+
+    def clear_break(self, filename, lineno):
+        msg = self.call("clear_break", filename, lineno)
+        return msg
+
+    def clear_all_file_breaks(self, filename):
+        msg = self.call("clear_all_file_breaks", filename)
+        return msg
+
+def start_remote_debugger(rpcclt, pyshell):
+    """Start the subprocess debugger, initialize the debugger GUI and RPC link
+
+    Request the RPCServer start the Python subprocess debugger and link.  Set
+    up the Idle side of the split debugger by instantiating the IdbProxy,
+    debugger GUI, and debugger GUIAdapter objects and linking them together.
+
+    Register the GUIAdapter with the RPCClient to handle debugger GUI
+    interaction requests coming from the subprocess debugger via the GUIProxy.
+
+    The IdbAdapter will pass execution and environment requests coming from the
+    Idle debugger GUI to the subprocess debugger via the IdbProxy.
+
+    """
+    global idb_adap_oid
+
+    idb_adap_oid = rpcclt.remotecall("exec", "start_the_debugger",\
+                                   (gui_adap_oid,), {})
+    idb_proxy = IdbProxy(rpcclt, pyshell, idb_adap_oid)
+    gui = debugger.Debugger(pyshell, idb_proxy)
+    gui_adap = GUIAdapter(rpcclt, gui)
+    rpcclt.register(gui_adap_oid, gui_adap)
+    return gui
+
+def close_remote_debugger(rpcclt):
+    """Shut down subprocess debugger and Idle side of debugger RPC link
+
+    Request that the RPCServer shut down the subprocess debugger and link.
+    Unregister the GUIAdapter, which will cause a GC on the Idle process
+    debugger and RPC link objects.  (The second reference to the debugger GUI
+    is deleted in pyshell.close_remote_debugger().)
+
+    """
+    close_subprocess_debugger(rpcclt)
+    rpcclt.unregister(gui_adap_oid)
+
+def close_subprocess_debugger(rpcclt):
+    rpcclt.remotecall("exec", "stop_the_debugger", (idb_adap_oid,), {})
+
+def restart_subprocess_debugger(rpcclt):
+    idb_adap_oid_ret = rpcclt.remotecall("exec", "start_the_debugger",\
+                                         (gui_adap_oid,), {})
+    assert idb_adap_oid_ret == idb_adap_oid, 'Idb restarted with different oid'
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_debugger_r', verbosity=2, exit=False)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj.py
new file mode 100644
index 0000000000000000000000000000000000000000..fb448ece2fa25e738cb41a10995ca9b2f6ab4556
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj.py
@@ -0,0 +1,146 @@
+"""Define tree items for debug stackviewer, which is only user.
+"""
+# XXX TO DO:
+# - popup menu
+# - support partial or total redisplay
+# - more doc strings
+# - tooltips
+
+# object browser
+
+# XXX TO DO:
+# - for classes/modules, add "open source" to object browser
+from reprlib import Repr
+
+from idlelib.tree import TreeItem, TreeNode, ScrolledCanvas
+
+myrepr = Repr()
+myrepr.maxstring = 100
+myrepr.maxother = 100
+
+class ObjectTreeItem(TreeItem):
+    def __init__(self, labeltext, object_, setfunction=None):
+        self.labeltext = labeltext
+        self.object = object_
+        self.setfunction = setfunction
+    def GetLabelText(self):
+        return self.labeltext
+    def GetText(self):
+        return myrepr.repr(self.object)
+    def GetIconName(self):
+        if not self.IsExpandable():
+            return "python"
+    def IsEditable(self):
+        return self.setfunction is not None
+    def SetText(self, text):
+        try:
+            value = eval(text)
+            self.setfunction(value)
+        except:
+            pass
+        else:
+            self.object = value
+    def IsExpandable(self):
+        return not not dir(self.object)
+    def GetSubList(self):
+        keys = dir(self.object)
+        sublist = []
+        for key in keys:
+            try:
+                value = getattr(self.object, key)
+            except AttributeError:
+                continue
+            item = make_objecttreeitem(
+                str(key) + " =",
+                value,
+                lambda value, key=key, object_=self.object:
+                    setattr(object_, key, value))
+            sublist.append(item)
+        return sublist
+
+class ClassTreeItem(ObjectTreeItem):
+    def IsExpandable(self):
+        return True
+    def GetSubList(self):
+        sublist = ObjectTreeItem.GetSubList(self)
+        if len(self.object.__bases__) == 1:
+            item = make_objecttreeitem("__bases__[0] =",
+                self.object.__bases__[0])
+        else:
+            item = make_objecttreeitem("__bases__ =", self.object.__bases__)
+        sublist.insert(0, item)
+        return sublist
+
+class AtomicObjectTreeItem(ObjectTreeItem):
+    def IsExpandable(self):
+        return False
+
+class SequenceTreeItem(ObjectTreeItem):
+    def IsExpandable(self):
+        return len(self.object) > 0
+    def keys(self):
+        return range(len(self.object))
+    def GetSubList(self):
+        sublist = []
+        for key in self.keys():
+            try:
+                value = self.object[key]
+            except KeyError:
+                continue
+            def setfunction(value, key=key, object_=self.object):
+                object_[key] = value
+            item = make_objecttreeitem(f"{key!r}:", value, setfunction)
+            sublist.append(item)
+        return sublist
+
+class DictTreeItem(SequenceTreeItem):
+    def keys(self):
+        # TODO return sorted(self.object)
+        keys = list(self.object)
+        try:
+            keys.sort()
+        except:
+            pass
+        return keys
+
+dispatch = {
+    int: AtomicObjectTreeItem,
+    float: AtomicObjectTreeItem,
+    str: AtomicObjectTreeItem,
+    tuple: SequenceTreeItem,
+    list: SequenceTreeItem,
+    dict: DictTreeItem,
+    type: ClassTreeItem,
+}
+
+def make_objecttreeitem(labeltext, object_, setfunction=None):
+    t = type(object_)
+    if t in dispatch:
+        c = dispatch[t]
+    else:
+        c = ObjectTreeItem
+    return c(labeltext, object_, setfunction)
+
+
+def _debug_object_browser(parent):  # htest #
+    import sys
+    from tkinter import Toplevel
+    top = Toplevel(parent)
+    top.title("Test debug object browser")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x + 100, y + 175))
+    top.configure(bd=0, bg="yellow")
+    top.focus_set()
+    sc = ScrolledCanvas(top, bg="white", highlightthickness=0, takefocus=1)
+    sc.frame.pack(expand=1, fill="both")
+    item = make_objecttreeitem("sys", sys)
+    node = TreeNode(sc.canvas, None, item)
+    node.update()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_debugobj', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_debug_object_browser)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj_r.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj_r.py
new file mode 100644
index 0000000000000000000000000000000000000000..75e75ebe5acafcdffcff92fd385f6099c864b973
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/debugobj_r.py
@@ -0,0 +1,41 @@
+from idlelib import rpc
+
+def remote_object_tree_item(item):
+    wrapper = WrappedObjectTreeItem(item)
+    oid = id(wrapper)
+    rpc.objecttable[oid] = wrapper
+    return oid
+
+class WrappedObjectTreeItem:
+    # Lives in PYTHON subprocess
+
+    def __init__(self, item):
+        self.__item = item
+
+    def __getattr__(self, name):
+        value = getattr(self.__item, name)
+        return value
+
+    def _GetSubList(self):
+        sub_list = self.__item._GetSubList()
+        return list(map(remote_object_tree_item, sub_list))
+
+class StubObjectTreeItem:
+    # Lives in IDLE process
+
+    def __init__(self, sockio, oid):
+        self.sockio = sockio
+        self.oid = oid
+
+    def __getattr__(self, name):
+        value = rpc.MethodProxy(self.sockio, self.oid, name)
+        return value
+
+    def _GetSubList(self):
+        sub_list = self.sockio.remotecall(self.oid, "_GetSubList", (), {})
+        return [StubObjectTreeItem(self.sockio, oid) for oid in sub_list]
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_debugobj_r', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/delegator.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/delegator.py
new file mode 100644
index 0000000000000000000000000000000000000000..93ae8bbd43ff44069a23693e1c2847876ee8ff93
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/delegator.py
@@ -0,0 +1,34 @@
+class Delegator:
+
+    def __init__(self, delegate=None):
+        self.delegate = delegate
+        self.__cache = set()
+        # Cache is used to only remove added attributes
+        # when changing the delegate.
+
+    def __getattr__(self, name):
+        attr = getattr(self.delegate, name) # May raise AttributeError
+        setattr(self, name, attr)
+        self.__cache.add(name)
+        return attr
+
+    def resetcache(self):
+        "Removes added attributes while leaving original attributes."
+        # Function is really about resetting delegator dict
+        # to original state.  Cache is just a means
+        for key in self.__cache:
+            try:
+                delattr(self, key)
+            except AttributeError:
+                pass
+        self.__cache.clear()
+
+    def setdelegate(self, delegate):
+        "Reset attributes and change delegate."
+        self.resetcache()
+        self.delegate = delegate
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_delegator', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/dynoption.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/dynoption.py
new file mode 100644
index 0000000000000000000000000000000000000000..b8937f7106ca75b63944be314ef76681b896d8e4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/dynoption.py
@@ -0,0 +1,57 @@
+"""
+OptionMenu widget modified to allow dynamic menu reconfiguration
+and setting of highlightthickness
+"""
+from tkinter import OptionMenu, _setit, StringVar, Button
+
+class DynOptionMenu(OptionMenu):
+    """Add SetMenu and highlightthickness to OptionMenu.
+
+    Highlightthickness adds space around menu button.
+    """
+    def __init__(self, master, variable, value, *values, **kwargs):
+        highlightthickness = kwargs.pop('highlightthickness', None)
+        OptionMenu.__init__(self, master, variable, value, *values, **kwargs)
+        self['highlightthickness'] = highlightthickness
+        self.variable = variable
+        self.command = kwargs.get('command')
+
+    def SetMenu(self,valueList,value=None):
+        """
+        clear and reload the menu with a new set of options.
+        valueList - list of new options
+        value - initial value to set the optionmenu's menubutton to
+        """
+        self['menu'].delete(0,'end')
+        for item in valueList:
+            self['menu'].add_command(label=item,
+                    command=_setit(self.variable,item,self.command))
+        if value:
+            self.variable.set(value)
+
+
+def _dyn_option_menu(parent):  # htest #
+    from tkinter import Toplevel # + StringVar, Button
+
+    top = Toplevel(parent)
+    top.title("Test dynamic option menu")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("200x100+%d+%d" % (x + 250, y + 175))
+    top.focus_set()
+
+    var = StringVar(top)
+    var.set("Old option set") #Set the default value
+    dyn = DynOptionMenu(top, var, "old1","old2","old3","old4",
+                        highlightthickness=5)
+    dyn.pack()
+
+    def update():
+        dyn.SetMenu(["new1","new2","new3","new4"], value="new option set")
+    button = Button(top, text="Change option set", command=update)
+    button.pack()
+
+
+if __name__ == '__main__':
+    # Only module without unittests because of intention to replace.
+    from idlelib.idle_test.htest import run
+    run(_dyn_option_menu)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/editor.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/editor.py
new file mode 100644
index 0000000000000000000000000000000000000000..3128934763a1c0806f7922ffc867bd8603a5c1a6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/editor.py
@@ -0,0 +1,1721 @@
+import importlib.abc
+import importlib.util
+import os
+import platform
+import re
+import string
+import sys
+import tokenize
+import traceback
+import webbrowser
+
+from tkinter import *
+from tkinter.font import Font
+from tkinter.ttk import Scrollbar
+from tkinter import simpledialog
+from tkinter import messagebox
+
+from idlelib.config import idleConf
+from idlelib import configdialog
+from idlelib import grep
+from idlelib import help
+from idlelib import help_about
+from idlelib import macosx
+from idlelib.multicall import MultiCallCreator
+from idlelib import pyparse
+from idlelib import query
+from idlelib import replace
+from idlelib import search
+from idlelib.tree import wheel_event
+from idlelib.util import py_extensions
+from idlelib import window
+from idlelib.help import _get_dochome
+
+# The default tab setting for a Text widget, in average-width characters.
+TK_TABWIDTH_DEFAULT = 8
+darwin = sys.platform == 'darwin'
+
+class EditorWindow:
+    from idlelib.percolator import Percolator
+    from idlelib.colorizer import ColorDelegator, color_config
+    from idlelib.undo import UndoDelegator
+    from idlelib.iomenu import IOBinding, encoding
+    from idlelib import mainmenu
+    from idlelib.statusbar import MultiStatusBar
+    from idlelib.autocomplete import AutoComplete
+    from idlelib.autoexpand import AutoExpand
+    from idlelib.calltip import Calltip
+    from idlelib.codecontext import CodeContext
+    from idlelib.sidebar import LineNumbers
+    from idlelib.format import FormatParagraph, FormatRegion, Indents, Rstrip
+    from idlelib.parenmatch import ParenMatch
+    from idlelib.zoomheight import ZoomHeight
+
+    filesystemencoding = sys.getfilesystemencoding()  # for file names
+    help_url = None
+
+    allow_code_context = True
+    allow_line_numbers = True
+    user_input_insert_tags = None
+
+    def __init__(self, flist=None, filename=None, key=None, root=None):
+        # Delay import: runscript imports pyshell imports EditorWindow.
+        from idlelib.runscript import ScriptBinding
+
+        if EditorWindow.help_url is None:
+            EditorWindow.help_url = _get_dochome()
+        self.flist = flist
+        root = root or flist.root
+        self.root = root
+        self.menubar = Menu(root)
+        self.top = top = window.ListedToplevel(root, menu=self.menubar)
+        if flist:
+            self.tkinter_vars = flist.vars
+            #self.top.instance_dict makes flist.inversedict available to
+            #configdialog.py so it can access all EditorWindow instances
+            self.top.instance_dict = flist.inversedict
+        else:
+            self.tkinter_vars = {}  # keys: Tkinter event names
+                                    # values: Tkinter variable instances
+            self.top.instance_dict = {}
+        self.recent_files_path = idleConf.userdir and os.path.join(
+                idleConf.userdir, 'recent-files.lst')
+
+        self.prompt_last_line = ''  # Override in PyShell
+        self.text_frame = text_frame = Frame(top)
+        self.vbar = vbar = Scrollbar(text_frame, name='vbar')
+        width = idleConf.GetOption('main', 'EditorWindow', 'width', type='int')
+        text_options = {
+                'name': 'text',
+                'padx': 5,
+                'wrap': 'none',
+                'highlightthickness': 0,
+                'width': width,
+                'tabstyle': 'wordprocessor',  # new in 8.5
+                'height': idleConf.GetOption(
+                        'main', 'EditorWindow', 'height', type='int'),
+                }
+        self.text = text = MultiCallCreator(Text)(text_frame, **text_options)
+        self.top.focused_widget = self.text
+
+        self.createmenubar()
+        self.apply_bindings()
+
+        self.top.protocol("WM_DELETE_WINDOW", self.close)
+        self.top.bind("<<close-window>>", self.close_event)
+        if macosx.isAquaTk():
+            # Command-W on editor windows doesn't work without this.
+            text.bind('<<close-window>>', self.close_event)
+            # Some OS X systems have only one mouse button, so use
+            # control-click for popup context menus there. For two
+            # buttons, AquaTk defines <2> as the right button, not <3>.
+            text.bind("<Control-Button-1>",self.right_menu_event)
+            text.bind("<2>", self.right_menu_event)
+        else:
+            # Elsewhere, use right-click for popup menus.
+            text.bind("<3>",self.right_menu_event)
+
+        text.bind('<MouseWheel>', wheel_event)
+        if text._windowingsystem == 'x11':
+            text.bind('<Button-4>', wheel_event)
+            text.bind('<Button-5>', wheel_event)
+        text.bind('<Configure>', self.handle_winconfig)
+        text.bind("<<cut>>", self.cut)
+        text.bind("<<copy>>", self.copy)
+        text.bind("<<paste>>", self.paste)
+        text.bind("<<center-insert>>", self.center_insert_event)
+        text.bind("<<help>>", self.help_dialog)
+        text.bind("<<python-docs>>", self.python_docs)
+        text.bind("<<about-idle>>", self.about_dialog)
+        text.bind("<<open-config-dialog>>", self.config_dialog)
+        text.bind("<<open-module>>", self.open_module_event)
+        text.bind("<<do-nothing>>", lambda event: "break")
+        text.bind("<<select-all>>", self.select_all)
+        text.bind("<<remove-selection>>", self.remove_selection)
+        text.bind("<<find>>", self.find_event)
+        text.bind("<<find-again>>", self.find_again_event)
+        text.bind("<<find-in-files>>", self.find_in_files_event)
+        text.bind("<<find-selection>>", self.find_selection_event)
+        text.bind("<<replace>>", self.replace_event)
+        text.bind("<<goto-line>>", self.goto_line_event)
+        text.bind("<<smart-backspace>>",self.smart_backspace_event)
+        text.bind("<<newline-and-indent>>",self.newline_and_indent_event)
+        text.bind("<<smart-indent>>",self.smart_indent_event)
+        self.fregion = fregion = self.FormatRegion(self)
+        # self.fregion used in smart_indent_event to access indent_region.
+        text.bind("<<indent-region>>", fregion.indent_region_event)
+        text.bind("<<dedent-region>>", fregion.dedent_region_event)
+        text.bind("<<comment-region>>", fregion.comment_region_event)
+        text.bind("<<uncomment-region>>", fregion.uncomment_region_event)
+        text.bind("<<tabify-region>>", fregion.tabify_region_event)
+        text.bind("<<untabify-region>>", fregion.untabify_region_event)
+        indents = self.Indents(self)
+        text.bind("<<toggle-tabs>>", indents.toggle_tabs_event)
+        text.bind("<<change-indentwidth>>", indents.change_indentwidth_event)
+        text.bind("<Left>", self.move_at_edge_if_selection(0))
+        text.bind("<Right>", self.move_at_edge_if_selection(1))
+        text.bind("<<del-word-left>>", self.del_word_left)
+        text.bind("<<del-word-right>>", self.del_word_right)
+        text.bind("<<beginning-of-line>>", self.home_callback)
+
+        if flist:
+            flist.inversedict[self] = key
+            if key:
+                flist.dict[key] = self
+            text.bind("<<open-new-window>>", self.new_callback)
+            text.bind("<<close-all-windows>>", self.flist.close_all_callback)
+            text.bind("<<open-class-browser>>", self.open_module_browser)
+            text.bind("<<open-path-browser>>", self.open_path_browser)
+            text.bind("<<open-turtle-demo>>", self.open_turtle_demo)
+
+        self.set_status_bar()
+        text_frame.pack(side=LEFT, fill=BOTH, expand=1)
+        text_frame.rowconfigure(1, weight=1)
+        text_frame.columnconfigure(1, weight=1)
+        vbar['command'] = self.handle_yview
+        vbar.grid(row=1, column=2, sticky=NSEW)
+        text['yscrollcommand'] = vbar.set
+        text['font'] = idleConf.GetFont(self.root, 'main', 'EditorWindow')
+        text.grid(row=1, column=1, sticky=NSEW)
+        text.focus_set()
+        self.set_width()
+
+        # usetabs true  -> literal tab characters are used by indent and
+        #                  dedent cmds, possibly mixed with spaces if
+        #                  indentwidth is not a multiple of tabwidth,
+        #                  which will cause Tabnanny to nag!
+        #         false -> tab characters are converted to spaces by indent
+        #                  and dedent cmds, and ditto TAB keystrokes
+        # Although use-spaces=0 can be configured manually in config-main.def,
+        # configuration of tabs v. spaces is not supported in the configuration
+        # dialog.  IDLE promotes the preferred Python indentation: use spaces!
+        usespaces = idleConf.GetOption('main', 'Indent',
+                                       'use-spaces', type='bool')
+        self.usetabs = not usespaces
+
+        # tabwidth is the display width of a literal tab character.
+        # CAUTION:  telling Tk to use anything other than its default
+        # tab setting causes it to use an entirely different tabbing algorithm,
+        # treating tab stops as fixed distances from the left margin.
+        # Nobody expects this, so for now tabwidth should never be changed.
+        self.tabwidth = 8    # must remain 8 until Tk is fixed.
+
+        # indentwidth is the number of screen characters per indent level.
+        # The recommended Python indentation is four spaces.
+        self.indentwidth = self.tabwidth
+        self.set_notabs_indentwidth()
+
+        # Store the current value of the insertofftime now so we can restore
+        # it if needed.
+        if not hasattr(idleConf, 'blink_off_time'):
+            idleConf.blink_off_time = self.text['insertofftime']
+        self.update_cursor_blink()
+
+        # When searching backwards for a reliable place to begin parsing,
+        # first start num_context_lines[0] lines back, then
+        # num_context_lines[1] lines back if that didn't work, and so on.
+        # The last value should be huge (larger than the # of lines in a
+        # conceivable file).
+        # Making the initial values larger slows things down more often.
+        self.num_context_lines = 50, 500, 5000000
+        self.per = per = self.Percolator(text)
+        self.undo = undo = self.UndoDelegator()
+        per.insertfilter(undo)
+        text.undo_block_start = undo.undo_block_start
+        text.undo_block_stop = undo.undo_block_stop
+        undo.set_saved_change_hook(self.saved_change_hook)
+        # IOBinding implements file I/O and printing functionality
+        self.io = io = self.IOBinding(self)
+        io.set_filename_change_hook(self.filename_change_hook)
+        self.good_load = False
+        self.set_indentation_params(False)
+        self.color = None # initialized below in self.ResetColorizer
+        self.code_context = None # optionally initialized later below
+        self.line_numbers = None # optionally initialized later below
+        if filename:
+            if os.path.exists(filename) and not os.path.isdir(filename):
+                if io.loadfile(filename):
+                    self.good_load = True
+                    is_py_src = self.ispythonsource(filename)
+                    self.set_indentation_params(is_py_src)
+            else:
+                io.set_filename(filename)
+                self.good_load = True
+
+        self.ResetColorizer()
+        self.saved_change_hook()
+        self.update_recent_files_list()
+        self.load_extensions()
+        menu = self.menudict.get('window')
+        if menu:
+            end = menu.index("end")
+            if end is None:
+                end = -1
+            if end >= 0:
+                menu.add_separator()
+                end = end + 1
+            self.wmenu_end = end
+            window.register_callback(self.postwindowsmenu)
+
+        # Some abstractions so IDLE extensions are cross-IDE
+        self.askinteger = simpledialog.askinteger
+        self.askyesno = messagebox.askyesno
+        self.showerror = messagebox.showerror
+
+        # Add pseudoevents for former extension fixed keys.
+        # (This probably needs to be done once in the process.)
+        text.event_add('<<autocomplete>>', '<Key-Tab>')
+        text.event_add('<<try-open-completions>>', '<KeyRelease-period>',
+                       '<KeyRelease-slash>', '<KeyRelease-backslash>')
+        text.event_add('<<try-open-calltip>>', '<KeyRelease-parenleft>')
+        text.event_add('<<refresh-calltip>>', '<KeyRelease-parenright>')
+        text.event_add('<<paren-closed>>', '<KeyRelease-parenright>',
+                       '<KeyRelease-bracketright>', '<KeyRelease-braceright>')
+
+        # Former extension bindings depends on frame.text being packed
+        # (called from self.ResetColorizer()).
+        autocomplete = self.AutoComplete(self, self.user_input_insert_tags)
+        text.bind("<<autocomplete>>", autocomplete.autocomplete_event)
+        text.bind("<<try-open-completions>>",
+                  autocomplete.try_open_completions_event)
+        text.bind("<<force-open-completions>>",
+                  autocomplete.force_open_completions_event)
+        text.bind("<<expand-word>>", self.AutoExpand(self).expand_word_event)
+        text.bind("<<format-paragraph>>",
+                  self.FormatParagraph(self).format_paragraph_event)
+        parenmatch = self.ParenMatch(self)
+        text.bind("<<flash-paren>>", parenmatch.flash_paren_event)
+        text.bind("<<paren-closed>>", parenmatch.paren_closed_event)
+        scriptbinding = ScriptBinding(self)
+        text.bind("<<check-module>>", scriptbinding.check_module_event)
+        text.bind("<<run-module>>", scriptbinding.run_module_event)
+        text.bind("<<run-custom>>", scriptbinding.run_custom_event)
+        text.bind("<<do-rstrip>>", self.Rstrip(self).do_rstrip)
+        self.ctip = ctip = self.Calltip(self)
+        text.bind("<<try-open-calltip>>", ctip.try_open_calltip_event)
+        #refresh-calltip must come after paren-closed to work right
+        text.bind("<<refresh-calltip>>", ctip.refresh_calltip_event)
+        text.bind("<<force-open-calltip>>", ctip.force_open_calltip_event)
+        text.bind("<<zoom-height>>", self.ZoomHeight(self).zoom_height_event)
+        if self.allow_code_context:
+            self.code_context = self.CodeContext(self)
+            text.bind("<<toggle-code-context>>",
+                      self.code_context.toggle_code_context_event)
+        else:
+            self.update_menu_state('options', '*ode*ontext', 'disabled')
+        if self.allow_line_numbers:
+            self.line_numbers = self.LineNumbers(self)
+            if idleConf.GetOption('main', 'EditorWindow',
+                                  'line-numbers-default', type='bool'):
+                self.toggle_line_numbers_event()
+            text.bind("<<toggle-line-numbers>>", self.toggle_line_numbers_event)
+        else:
+            self.update_menu_state('options', '*ine*umbers', 'disabled')
+
+    def handle_winconfig(self, event=None):
+        self.set_width()
+
+    def set_width(self):
+        text = self.text
+        inner_padding = sum(map(text.tk.getint, [text.cget('border'),
+                                                 text.cget('padx')]))
+        pixel_width = text.winfo_width() - 2 * inner_padding
+
+        # Divide the width of the Text widget by the font width,
+        # which is taken to be the width of '0' (zero).
+        # http://www.tcl.tk/man/tcl8.6/TkCmd/text.htm#M21
+        zero_char_width = \
+            Font(text, font=text.cget('font')).measure('0')
+        self.width = pixel_width // zero_char_width
+
+    def new_callback(self, event):
+        dirname, basename = self.io.defaultfilename()
+        self.flist.new(dirname)
+        return "break"
+
+    def home_callback(self, event):
+        if (event.state & 4) != 0 and event.keysym == "Home":
+            # state&4==Control. If <Control-Home>, use the Tk binding.
+            return None
+        if self.text.index("iomark") and \
+           self.text.compare("iomark", "<=", "insert lineend") and \
+           self.text.compare("insert linestart", "<=", "iomark"):
+            # In Shell on input line, go to just after prompt
+            insertpt = int(self.text.index("iomark").split(".")[1])
+        else:
+            line = self.text.get("insert linestart", "insert lineend")
+            for insertpt in range(len(line)):
+                if line[insertpt] not in (' ','\t'):
+                    break
+            else:
+                insertpt=len(line)
+        lineat = int(self.text.index("insert").split('.')[1])
+        if insertpt == lineat:
+            insertpt = 0
+        dest = "insert linestart+"+str(insertpt)+"c"
+        if (event.state&1) == 0:
+            # shift was not pressed
+            self.text.tag_remove("sel", "1.0", "end")
+        else:
+            if not self.text.index("sel.first"):
+                # there was no previous selection
+                self.text.mark_set("my_anchor", "insert")
+            else:
+                if self.text.compare(self.text.index("sel.first"), "<",
+                                     self.text.index("insert")):
+                    self.text.mark_set("my_anchor", "sel.first") # extend back
+                else:
+                    self.text.mark_set("my_anchor", "sel.last") # extend forward
+            first = self.text.index(dest)
+            last = self.text.index("my_anchor")
+            if self.text.compare(first,">",last):
+                first,last = last,first
+            self.text.tag_remove("sel", "1.0", "end")
+            self.text.tag_add("sel", first, last)
+        self.text.mark_set("insert", dest)
+        self.text.see("insert")
+        return "break"
+
+    def set_status_bar(self):
+        self.status_bar = self.MultiStatusBar(self.top)
+        sep = Frame(self.top, height=1, borderwidth=1, background='grey75')
+        if sys.platform == "darwin":
+            # Insert some padding to avoid obscuring some of the statusbar
+            # by the resize widget.
+            self.status_bar.set_label('_padding1', '    ', side=RIGHT)
+        self.status_bar.set_label('column', 'Col: ?', side=RIGHT)
+        self.status_bar.set_label('line', 'Ln: ?', side=RIGHT)
+        self.status_bar.pack(side=BOTTOM, fill=X)
+        sep.pack(side=BOTTOM, fill=X)
+        self.text.bind("<<set-line-and-column>>", self.set_line_and_column)
+        self.text.event_add("<<set-line-and-column>>",
+                            "<KeyRelease>", "<ButtonRelease>")
+        self.text.after_idle(self.set_line_and_column)
+
+    def set_line_and_column(self, event=None):
+        line, column = self.text.index(INSERT).split('.')
+        self.status_bar.set_label('column', 'Col: %s' % column)
+        self.status_bar.set_label('line', 'Ln: %s' % line)
+
+
+    """ Menu definitions and functions.
+    * self.menubar - the always visible horizontal menu bar.
+    * mainmenu.menudefs - a list of tuples, one for each menubar item.
+      Each tuple pairs a lower-case name and list of dropdown items.
+      Each item is a name, virtual event pair or None for separator.
+    * mainmenu.default_keydefs - maps events to keys.
+    * text.keydefs - same.
+    * cls.menu_specs - menubar name, titlecase display form pairs
+      with Alt-hotkey indicator.  A subset of menudefs items.
+    * self.menudict - map menu name to dropdown menu.
+    * self.recent_files_menu - 2nd level cascade in the file cascade.
+    * self.wmenu_end - set in __init__ (purpose unclear).
+
+    createmenubar, postwindowsmenu, update_menu_label, update_menu_state,
+    ApplyKeybings (2nd part), reset_help_menu_entries,
+    _extra_help_callback, update_recent_files_list,
+    apply_bindings, fill_menus, (other functions?)
+    """
+
+    menu_specs = [
+        ("file", "_File"),
+        ("edit", "_Edit"),
+        ("format", "F_ormat"),
+        ("run", "_Run"),
+        ("options", "_Options"),
+        ("window", "_Window"),
+        ("help", "_Help"),
+    ]
+
+    def createmenubar(self):
+        """Populate the menu bar widget for the editor window.
+
+        Each option on the menubar is itself a cascade-type Menu widget
+        with the menubar as the parent.  The names, labels, and menu
+        shortcuts for the menubar items are stored in menu_specs.  Each
+        submenu is subsequently populated in fill_menus(), except for
+        'Recent Files' which is added to the File menu here.
+
+        Instance variables:
+        menubar: Menu widget containing first level menu items.
+        menudict: Dictionary of {menuname: Menu instance} items.  The keys
+            represent the valid menu items for this window and may be a
+            subset of all the menudefs available.
+        recent_files_menu: Menu widget contained within the 'file' menudict.
+        """
+        mbar = self.menubar
+        self.menudict = menudict = {}
+        for name, label in self.menu_specs:
+            underline, label = prepstr(label)
+            postcommand = getattr(self, f'{name}_menu_postcommand', None)
+            menudict[name] = menu = Menu(mbar, name=name, tearoff=0,
+                                         postcommand=postcommand)
+            mbar.add_cascade(label=label, menu=menu, underline=underline)
+        if macosx.isCarbonTk():
+            # Insert the application menu
+            menudict['application'] = menu = Menu(mbar, name='apple',
+                                                  tearoff=0)
+            mbar.add_cascade(label='IDLE', menu=menu)
+        self.fill_menus()
+        self.recent_files_menu = Menu(self.menubar, tearoff=0)
+        self.menudict['file'].insert_cascade(3, label='Recent Files',
+                                             underline=0,
+                                             menu=self.recent_files_menu)
+        self.base_helpmenu_length = self.menudict['help'].index(END)
+        self.reset_help_menu_entries()
+
+    def postwindowsmenu(self):
+        """Callback to register window.
+
+        Only called when Window menu exists.
+        """
+        menu = self.menudict['window']
+        end = menu.index("end")
+        if end is None:
+            end = -1
+        if end > self.wmenu_end:
+            menu.delete(self.wmenu_end+1, end)
+        window.add_windows_to_menu(menu)
+
+    def update_menu_label(self, menu, index, label):
+        "Update label for menu item at index."
+        menuitem = self.menudict[menu]
+        menuitem.entryconfig(index, label=label)
+
+    def update_menu_state(self, menu, index, state):
+        "Update state for menu item at index."
+        menuitem = self.menudict[menu]
+        menuitem.entryconfig(index, state=state)
+
+    def handle_yview(self, event, *args):
+        "Handle scrollbar."
+        if event == 'moveto':
+            fraction = float(args[0])
+            lines = (round(self.getlineno('end') * fraction) -
+                     self.getlineno('@0,0'))
+            event = 'scroll'
+            args = (lines, 'units')
+        self.text.yview(event, *args)
+        return 'break'
+
+    rmenu = None
+
+    def right_menu_event(self, event):
+        text = self.text
+        newdex = text.index(f'@{event.x},{event.y}')
+        try:
+            in_selection = (text.compare('sel.first', '<=', newdex) and
+                           text.compare(newdex, '<=',  'sel.last'))
+        except TclError:
+            in_selection = False
+        if not in_selection:
+            text.tag_remove("sel", "1.0", "end")
+            text.mark_set("insert", newdex)
+        if not self.rmenu:
+            self.make_rmenu()
+        rmenu = self.rmenu
+        self.event = event
+        iswin = sys.platform[:3] == 'win'
+        if iswin:
+            text.config(cursor="arrow")
+
+        for item in self.rmenu_specs:
+            try:
+                label, eventname, verify_state = item
+            except ValueError: # see issue1207589
+                continue
+
+            if verify_state is None:
+                continue
+            state = getattr(self, verify_state)()
+            rmenu.entryconfigure(label, state=state)
+
+        rmenu.tk_popup(event.x_root, event.y_root)
+        if iswin:
+            self.text.config(cursor="ibeam")
+        return "break"
+
+    rmenu_specs = [
+        # ("Label", "<<virtual-event>>", "statefuncname"), ...
+        ("Close", "<<close-window>>", None), # Example
+    ]
+
+    def make_rmenu(self):
+        rmenu = Menu(self.text, tearoff=0)
+        for item in self.rmenu_specs:
+            label, eventname = item[0], item[1]
+            if label is not None:
+                def command(text=self.text, eventname=eventname):
+                    text.event_generate(eventname)
+                rmenu.add_command(label=label, command=command)
+            else:
+                rmenu.add_separator()
+        self.rmenu = rmenu
+
+    def rmenu_check_cut(self):
+        return self.rmenu_check_copy()
+
+    def rmenu_check_copy(self):
+        try:
+            indx = self.text.index('sel.first')
+        except TclError:
+            return 'disabled'
+        else:
+            return 'normal' if indx else 'disabled'
+
+    def rmenu_check_paste(self):
+        try:
+            self.text.tk.call('tk::GetSelection', self.text, 'CLIPBOARD')
+        except TclError:
+            return 'disabled'
+        else:
+            return 'normal'
+
+    def about_dialog(self, event=None):
+        "Handle Help 'About IDLE' event."
+        # Synchronize with macosx.overrideRootMenu.about_dialog.
+        help_about.AboutDialog(self.top)
+        return "break"
+
+    def config_dialog(self, event=None):
+        "Handle Options 'Configure IDLE' event."
+        # Synchronize with macosx.overrideRootMenu.config_dialog.
+        configdialog.ConfigDialog(self.top,'Settings')
+        return "break"
+
+    def help_dialog(self, event=None):
+        "Handle Help 'IDLE Help' event."
+        # Synchronize with macosx.overrideRootMenu.help_dialog.
+        if self.root:
+            parent = self.root
+        else:
+            parent = self.top
+        help.show_idlehelp(parent)
+        return "break"
+
+    def python_docs(self, event=None):
+        if sys.platform[:3] == 'win':
+            try:
+                os.startfile(self.help_url)
+            except OSError as why:
+                messagebox.showerror(title='Document Start Failure',
+                    message=str(why), parent=self.text)
+        else:
+            webbrowser.open(self.help_url)
+        return "break"
+
+    def cut(self,event):
+        self.text.event_generate("<<Cut>>")
+        return "break"
+
+    def copy(self,event):
+        if not self.text.tag_ranges("sel"):
+            # There is no selection, so do nothing and maybe interrupt.
+            return None
+        self.text.event_generate("<<Copy>>")
+        return "break"
+
+    def paste(self,event):
+        self.text.event_generate("<<Paste>>")
+        self.text.see("insert")
+        return "break"
+
+    def select_all(self, event=None):
+        self.text.tag_add("sel", "1.0", "end-1c")
+        self.text.mark_set("insert", "1.0")
+        self.text.see("insert")
+        return "break"
+
+    def remove_selection(self, event=None):
+        self.text.tag_remove("sel", "1.0", "end")
+        self.text.see("insert")
+        return "break"
+
+    def move_at_edge_if_selection(self, edge_index):
+        """Cursor move begins at start or end of selection
+
+        When a left/right cursor key is pressed create and return to Tkinter a
+        function which causes a cursor move from the associated edge of the
+        selection.
+
+        """
+        self_text_index = self.text.index
+        self_text_mark_set = self.text.mark_set
+        edges_table = ("sel.first+1c", "sel.last-1c")
+        def move_at_edge(event):
+            if (event.state & 5) == 0: # no shift(==1) or control(==4) pressed
+                try:
+                    self_text_index("sel.first")
+                    self_text_mark_set("insert", edges_table[edge_index])
+                except TclError:
+                    pass
+        return move_at_edge
+
+    def del_word_left(self, event):
+        self.text.event_generate('<Meta-Delete>')
+        return "break"
+
+    def del_word_right(self, event):
+        self.text.event_generate('<Meta-d>')
+        return "break"
+
+    def find_event(self, event):
+        search.find(self.text)
+        return "break"
+
+    def find_again_event(self, event):
+        search.find_again(self.text)
+        return "break"
+
+    def find_selection_event(self, event):
+        search.find_selection(self.text)
+        return "break"
+
+    def find_in_files_event(self, event):
+        grep.grep(self.text, self.io, self.flist)
+        return "break"
+
+    def replace_event(self, event):
+        replace.replace(self.text)
+        return "break"
+
+    def goto_line_event(self, event):
+        text = self.text
+        lineno = query.Goto(
+                text, "Go To Line",
+                "Enter a positive integer\n"
+                "('big' = end of file):"
+                ).result
+        if lineno is not None:
+            text.tag_remove("sel", "1.0", "end")
+            text.mark_set("insert", f'{lineno}.0')
+            text.see("insert")
+            self.set_line_and_column()
+        return "break"
+
+    def open_module(self):
+        """Get module name from user and open it.
+
+        Return module path or None for calls by open_module_browser
+        when latter is not invoked in named editor window.
+        """
+        # XXX This, open_module_browser, and open_path_browser
+        # would fit better in iomenu.IOBinding.
+        try:
+            name = self.text.get("sel.first", "sel.last").strip()
+        except TclError:
+            name = ''
+        file_path = query.ModuleName(
+                self.text, "Open Module",
+                "Enter the name of a Python module\n"
+                "to search on sys.path and open:",
+                name).result
+        if file_path is not None:
+            if self.flist:
+                self.flist.open(file_path)
+            else:
+                self.io.loadfile(file_path)
+        return file_path
+
+    def open_module_event(self, event):
+        self.open_module()
+        return "break"
+
+    def open_module_browser(self, event=None):
+        filename = self.io.filename
+        if not (self.__class__.__name__ == 'PyShellEditorWindow'
+                and filename):
+            filename = self.open_module()
+            if filename is None:
+                return "break"
+        from idlelib import browser
+        browser.ModuleBrowser(self.root, filename)
+        return "break"
+
+    def open_path_browser(self, event=None):
+        from idlelib import pathbrowser
+        pathbrowser.PathBrowser(self.root)
+        return "break"
+
+    def open_turtle_demo(self, event = None):
+        import subprocess
+
+        cmd = [sys.executable,
+               '-c',
+               'from turtledemo.__main__ import main; main()']
+        subprocess.Popen(cmd, shell=False)
+        return "break"
+
+    def gotoline(self, lineno):
+        if lineno is not None and lineno > 0:
+            self.text.mark_set("insert", "%d.0" % lineno)
+            self.text.tag_remove("sel", "1.0", "end")
+            self.text.tag_add("sel", "insert", "insert +1l")
+            self.center()
+
+    def ispythonsource(self, filename):
+        if not filename or os.path.isdir(filename):
+            return True
+        base, ext = os.path.splitext(os.path.basename(filename))
+        if os.path.normcase(ext) in py_extensions:
+            return True
+        line = self.text.get('1.0', '1.0 lineend')
+        return line.startswith('#!') and 'python' in line
+
+    def close_hook(self):
+        if self.flist:
+            self.flist.unregister_maybe_terminate(self)
+            self.flist = None
+
+    def set_close_hook(self, close_hook):
+        self.close_hook = close_hook
+
+    def filename_change_hook(self):
+        if self.flist:
+            self.flist.filename_changed_edit(self)
+        self.saved_change_hook()
+        self.top.update_windowlist_registry(self)
+        self.ResetColorizer()
+
+    def _addcolorizer(self):
+        if self.color:
+            return
+        if self.ispythonsource(self.io.filename):
+            self.color = self.ColorDelegator()
+        # can add more colorizers here...
+        if self.color:
+            self.per.insertfilterafter(filter=self.color, after=self.undo)
+
+    def _rmcolorizer(self):
+        if not self.color:
+            return
+        self.color.removecolors()
+        self.per.removefilter(self.color)
+        self.color = None
+
+    def ResetColorizer(self):
+        "Update the color theme"
+        # Called from self.filename_change_hook and from configdialog.py
+        self._rmcolorizer()
+        self._addcolorizer()
+        EditorWindow.color_config(self.text)
+
+        if self.code_context is not None:
+            self.code_context.update_highlight_colors()
+
+        if self.line_numbers is not None:
+            self.line_numbers.update_colors()
+
+    IDENTCHARS = string.ascii_letters + string.digits + "_"
+
+    def colorize_syntax_error(self, text, pos):
+        text.tag_add("ERROR", pos)
+        char = text.get(pos)
+        if char and char in self.IDENTCHARS:
+            text.tag_add("ERROR", pos + " wordstart", pos)
+        if '\n' == text.get(pos):   # error at line end
+            text.mark_set("insert", pos)
+        else:
+            text.mark_set("insert", pos + "+1c")
+        text.see(pos)
+
+    def update_cursor_blink(self):
+        "Update the cursor blink configuration."
+        cursorblink = idleConf.GetOption(
+                'main', 'EditorWindow', 'cursor-blink', type='bool')
+        if not cursorblink:
+            self.text['insertofftime'] = 0
+        else:
+            # Restore the original value
+            self.text['insertofftime'] = idleConf.blink_off_time
+
+    def ResetFont(self):
+        "Update the text widgets' font if it is changed"
+        # Called from configdialog.py
+
+        # Update the code context widget first, since its height affects
+        # the height of the text widget.  This avoids double re-rendering.
+        if self.code_context is not None:
+            self.code_context.update_font()
+        # Next, update the line numbers widget, since its width affects
+        # the width of the text widget.
+        if self.line_numbers is not None:
+            self.line_numbers.update_font()
+        # Finally, update the main text widget.
+        new_font = idleConf.GetFont(self.root, 'main', 'EditorWindow')
+        self.text['font'] = new_font
+        self.set_width()
+
+    def RemoveKeybindings(self):
+        """Remove the virtual, configurable keybindings.
+
+        Leaves the default Tk Text keybindings.
+        """
+        # Called from configdialog.deactivate_current_config.
+        self.mainmenu.default_keydefs = keydefs = idleConf.GetCurrentKeySet()
+        for event, keylist in keydefs.items():
+            self.text.event_delete(event, *keylist)
+        for extensionName in self.get_standard_extension_names():
+            xkeydefs = idleConf.GetExtensionBindings(extensionName)
+            if xkeydefs:
+                for event, keylist in xkeydefs.items():
+                    self.text.event_delete(event, *keylist)
+
+    def ApplyKeybindings(self):
+        """Apply the virtual, configurable keybindings.
+
+        Also update hotkeys to current keyset.
+        """
+        # Called from configdialog.activate_config_changes.
+        self.mainmenu.default_keydefs = keydefs = idleConf.GetCurrentKeySet()
+        self.apply_bindings()
+        for extensionName in self.get_standard_extension_names():
+            xkeydefs = idleConf.GetExtensionBindings(extensionName)
+            if xkeydefs:
+                self.apply_bindings(xkeydefs)
+
+        # Update menu accelerators.
+        menuEventDict = {}
+        for menu in self.mainmenu.menudefs:
+            menuEventDict[menu[0]] = {}
+            for item in menu[1]:
+                if item:
+                    menuEventDict[menu[0]][prepstr(item[0])[1]] = item[1]
+        for menubarItem in self.menudict:
+            menu = self.menudict[menubarItem]
+            end = menu.index(END)
+            if end is None:
+                # Skip empty menus
+                continue
+            end += 1
+            for index in range(0, end):
+                if menu.type(index) == 'command':
+                    accel = menu.entrycget(index, 'accelerator')
+                    if accel:
+                        itemName = menu.entrycget(index, 'label')
+                        event = ''
+                        if menubarItem in menuEventDict:
+                            if itemName in menuEventDict[menubarItem]:
+                                event = menuEventDict[menubarItem][itemName]
+                        if event:
+                            accel = get_accelerator(keydefs, event)
+                            menu.entryconfig(index, accelerator=accel)
+
+    def set_notabs_indentwidth(self):
+        "Update the indentwidth if changed and not using tabs in this window"
+        # Called from configdialog.py
+        if not self.usetabs:
+            self.indentwidth = idleConf.GetOption('main', 'Indent','num-spaces',
+                                                  type='int')
+
+    def reset_help_menu_entries(self):
+        """Update the additional help entries on the Help menu."""
+        help_list = idleConf.GetAllExtraHelpSourcesList()
+        helpmenu = self.menudict['help']
+        # First delete the extra help entries, if any.
+        helpmenu_length = helpmenu.index(END)
+        if helpmenu_length > self.base_helpmenu_length:
+            helpmenu.delete((self.base_helpmenu_length + 1), helpmenu_length)
+        # Then rebuild them.
+        if help_list:
+            helpmenu.add_separator()
+            for entry in help_list:
+                cmd = self._extra_help_callback(entry[1])
+                helpmenu.add_command(label=entry[0], command=cmd)
+        # And update the menu dictionary.
+        self.menudict['help'] = helpmenu
+
+    def _extra_help_callback(self, resource):
+        """Return a callback that loads resource (file or web page)."""
+        def display_extra_help(helpfile=resource):
+            if not helpfile.startswith(('www', 'http')):
+                helpfile = os.path.normpath(helpfile)
+            if sys.platform[:3] == 'win':
+                try:
+                    os.startfile(helpfile)
+                except OSError as why:
+                    messagebox.showerror(title='Document Start Failure',
+                        message=str(why), parent=self.text)
+            else:
+                webbrowser.open(helpfile)
+        return display_extra_help
+
+    def update_recent_files_list(self, new_file=None):
+        "Load and update the recent files list and menus"
+        # TODO: move to iomenu.
+        rf_list = []
+        file_path = self.recent_files_path
+        if file_path and os.path.exists(file_path):
+            with open(file_path,
+                      encoding='utf_8', errors='replace') as rf_list_file:
+                rf_list = rf_list_file.readlines()
+        if new_file:
+            new_file = os.path.abspath(new_file) + '\n'
+            if new_file in rf_list:
+                rf_list.remove(new_file)  # move to top
+            rf_list.insert(0, new_file)
+        # clean and save the recent files list
+        bad_paths = []
+        for path in rf_list:
+            if '\0' in path or not os.path.exists(path[0:-1]):
+                bad_paths.append(path)
+        rf_list = [path for path in rf_list if path not in bad_paths]
+        ulchars = "1234567890ABCDEFGHIJK"
+        rf_list = rf_list[0:len(ulchars)]
+        if file_path:
+            try:
+                with open(file_path, 'w',
+                          encoding='utf_8', errors='replace') as rf_file:
+                    rf_file.writelines(rf_list)
+            except OSError as err:
+                if not getattr(self.root, "recentfiles_message", False):
+                    self.root.recentfiles_message = True
+                    messagebox.showwarning(title='IDLE Warning',
+                        message="Cannot save Recent Files list to disk.\n"
+                                f"  {err}\n"
+                                "Select OK to continue.",
+                        parent=self.text)
+        # for each edit window instance, construct the recent files menu
+        for instance in self.top.instance_dict:
+            menu = instance.recent_files_menu
+            menu.delete(0, END)  # clear, and rebuild:
+            for i, file_name in enumerate(rf_list):
+                file_name = file_name.rstrip()  # zap \n
+                callback = instance.__recent_file_callback(file_name)
+                menu.add_command(label=ulchars[i] + " " + file_name,
+                                 command=callback,
+                                 underline=0)
+
+    def __recent_file_callback(self, file_name):
+        def open_recent_file(fn_closure=file_name):
+            self.io.open(editFile=fn_closure)
+        return open_recent_file
+
+    def saved_change_hook(self):
+        short = self.short_title()
+        long = self.long_title()
+        _py_version = ' (%s)' % platform.python_version()
+        if short and long and not macosx.isCocoaTk():
+            # Don't use both values on macOS because
+            # that doesn't match platform conventions.
+            title = short + " - " + long + _py_version
+        elif short:
+            if short == "IDLE Shell":
+                title = short + " " +  platform.python_version()
+            else:
+                title = short + _py_version
+        elif long:
+            title = long
+        else:
+            title = "untitled"
+        icon = short or long or title
+        if not self.get_saved():
+            title = "*%s*" % title
+            icon = "*%s" % icon
+        self.top.wm_title(title)
+        self.top.wm_iconname(icon)
+
+        if macosx.isCocoaTk():
+            # Add a proxy icon to the window title
+            self.top.wm_attributes("-titlepath", long)
+
+            # Maintain the modification status for the window
+            self.top.wm_attributes("-modified", not self.get_saved())
+
+    def get_saved(self):
+        return self.undo.get_saved()
+
+    def set_saved(self, flag):
+        self.undo.set_saved(flag)
+
+    def reset_undo(self):
+        self.undo.reset_undo()
+
+    def short_title(self):
+        filename = self.io.filename
+        return os.path.basename(filename) if filename else "untitled"
+
+    def long_title(self):
+        return self.io.filename or ""
+
+    def center_insert_event(self, event):
+        self.center()
+        return "break"
+
+    def center(self, mark="insert"):
+        text = self.text
+        top, bot = self.getwindowlines()
+        lineno = self.getlineno(mark)
+        height = bot - top
+        newtop = max(1, lineno - height//2)
+        text.yview(float(newtop))
+
+    def getwindowlines(self):
+        text = self.text
+        top = self.getlineno("@0,0")
+        bot = self.getlineno("@0,65535")
+        if top == bot and text.winfo_height() == 1:
+            # Geometry manager hasn't run yet
+            height = int(text['height'])
+            bot = top + height - 1
+        return top, bot
+
+    def getlineno(self, mark="insert"):
+        text = self.text
+        return int(float(text.index(mark)))
+
+    def get_geometry(self):
+        "Return (width, height, x, y)"
+        geom = self.top.wm_geometry()
+        m = re.match(r"(\d+)x(\d+)\+(-?\d+)\+(-?\d+)", geom)
+        return list(map(int, m.groups()))
+
+    def close_event(self, event):
+        self.close()
+        return "break"
+
+    def maybesave(self):
+        if self.io:
+            if not self.get_saved():
+                if self.top.state()!='normal':
+                    self.top.deiconify()
+                self.top.lower()
+                self.top.lift()
+            return self.io.maybesave()
+
+    def close(self):
+        try:
+            reply = self.maybesave()
+            if str(reply) != "cancel":
+                self._close()
+            return reply
+        except AttributeError:  # bpo-35379: close called twice
+            pass
+
+    def _close(self):
+        if self.io.filename:
+            self.update_recent_files_list(new_file=self.io.filename)
+        window.unregister_callback(self.postwindowsmenu)
+        self.unload_extensions()
+        self.io.close()
+        self.io = None
+        self.undo = None
+        if self.color:
+            self.color.close()
+            self.color = None
+        self.text = None
+        self.tkinter_vars = None
+        self.per.close()
+        self.per = None
+        self.top.destroy()
+        if self.close_hook:
+            # unless override: unregister from flist, terminate if last window
+            self.close_hook()
+
+    def load_extensions(self):
+        self.extensions = {}
+        self.load_standard_extensions()
+
+    def unload_extensions(self):
+        for ins in list(self.extensions.values()):
+            if hasattr(ins, "close"):
+                ins.close()
+        self.extensions = {}
+
+    def load_standard_extensions(self):
+        for name in self.get_standard_extension_names():
+            try:
+                self.load_extension(name)
+            except:
+                print("Failed to load extension", repr(name))
+                traceback.print_exc()
+
+    def get_standard_extension_names(self):
+        return idleConf.GetExtensions(editor_only=True)
+
+    extfiles = {  # Map built-in config-extension section names to file names.
+        'ZzDummy': 'zzdummy',
+        }
+
+    def load_extension(self, name):
+        fname = self.extfiles.get(name, name)
+        try:
+            try:
+                mod = importlib.import_module('.' + fname, package=__package__)
+            except (ImportError, TypeError):
+                mod = importlib.import_module(fname)
+        except ImportError:
+            print("\nFailed to import extension: ", name)
+            raise
+        cls = getattr(mod, name)
+        keydefs = idleConf.GetExtensionBindings(name)
+        if hasattr(cls, "menudefs"):
+            self.fill_menus(cls.menudefs, keydefs)
+        ins = cls(self)
+        self.extensions[name] = ins
+        if keydefs:
+            self.apply_bindings(keydefs)
+            for vevent in keydefs:
+                methodname = vevent.replace("-", "_")
+                while methodname[:1] == '<':
+                    methodname = methodname[1:]
+                while methodname[-1:] == '>':
+                    methodname = methodname[:-1]
+                methodname = methodname + "_event"
+                if hasattr(ins, methodname):
+                    self.text.bind(vevent, getattr(ins, methodname))
+
+    def apply_bindings(self, keydefs=None):
+        """Add events with keys to self.text."""
+        if keydefs is None:
+            keydefs = self.mainmenu.default_keydefs
+        text = self.text
+        text.keydefs = keydefs
+        for event, keylist in keydefs.items():
+            if keylist:
+                text.event_add(event, *keylist)
+
+    def fill_menus(self, menudefs=None, keydefs=None):
+        """Fill in dropdown menus used by this window.
+
+        Items whose name begins with '!' become checkbuttons.
+        Other names indicate commands.  None becomes a separator.
+        """
+        if menudefs is None:
+            menudefs = self.mainmenu.menudefs
+        if keydefs is None:
+            keydefs = self.mainmenu.default_keydefs
+        menudict = self.menudict
+        text = self.text
+        for mname, entrylist in menudefs:
+            menu = menudict.get(mname)
+            if not menu:
+                continue
+            for entry in entrylist:
+                if entry is None:
+                    menu.add_separator()
+                else:
+                    label, eventname = entry
+                    checkbutton = (label[:1] == '!')
+                    if checkbutton:
+                        label = label[1:]
+                    underline, label = prepstr(label)
+                    accelerator = get_accelerator(keydefs, eventname)
+                    def command(text=text, eventname=eventname):
+                        text.event_generate(eventname)
+                    if checkbutton:
+                        var = self.get_var_obj(eventname, BooleanVar)
+                        menu.add_checkbutton(label=label, underline=underline,
+                            command=command, accelerator=accelerator,
+                            variable=var)
+                    else:
+                        menu.add_command(label=label, underline=underline,
+                                         command=command,
+                                         accelerator=accelerator)
+
+    def getvar(self, name):
+        var = self.get_var_obj(name)
+        if var:
+            value = var.get()
+            return value
+        else:
+            raise NameError(name)
+
+    def setvar(self, name, value, vartype=None):
+        var = self.get_var_obj(name, vartype)
+        if var:
+            var.set(value)
+        else:
+            raise NameError(name)
+
+    def get_var_obj(self, eventname, vartype=None):
+        """Return a tkinter variable instance for the event.
+        """
+        var = self.tkinter_vars.get(eventname)
+        if not var and vartype:
+            # Create a Tkinter variable object.
+            self.tkinter_vars[eventname] = var = vartype(self.text)
+        return var
+
+    # Tk implementations of "virtual text methods" -- each platform
+    # reusing IDLE's support code needs to define these for its GUI's
+    # flavor of widget.
+
+    # Is character at text_index in a Python string?  Return 0 for
+    # "guaranteed no", true for anything else.  This info is expensive
+    # to compute ab initio, but is probably already known by the
+    # platform's colorizer.
+
+    def is_char_in_string(self, text_index):
+        if self.color:
+            # Return true iff colorizer hasn't (re)gotten this far
+            # yet, or the character is tagged as being in a string
+            return self.text.tag_prevrange("TODO", text_index) or \
+                   "STRING" in self.text.tag_names(text_index)
+        else:
+            # The colorizer is missing: assume the worst
+            return 1
+
+    # If a selection is defined in the text widget, return (start,
+    # end) as Tkinter text indices, otherwise return (None, None)
+    def get_selection_indices(self):
+        try:
+            first = self.text.index("sel.first")
+            last = self.text.index("sel.last")
+            return first, last
+        except TclError:
+            return None, None
+
+    # Return the text widget's current view of what a tab stop means
+    # (equivalent width in spaces).
+
+    def get_tk_tabwidth(self):
+        current = self.text['tabs'] or TK_TABWIDTH_DEFAULT
+        return int(current)
+
+    # Set the text widget's current view of what a tab stop means.
+
+    def set_tk_tabwidth(self, newtabwidth):
+        text = self.text
+        if self.get_tk_tabwidth() != newtabwidth:
+            # Set text widget tab width
+            pixels = text.tk.call("font", "measure", text["font"],
+                                  "-displayof", text.master,
+                                  "n" * newtabwidth)
+            text.configure(tabs=pixels)
+
+### begin autoindent code ###  (configuration was moved to beginning of class)
+
+    def set_indentation_params(self, is_py_src, guess=True):
+        if is_py_src and guess:
+            i = self.guess_indent()
+            if 2 <= i <= 8:
+                self.indentwidth = i
+            if self.indentwidth != self.tabwidth:
+                self.usetabs = False
+        self.set_tk_tabwidth(self.tabwidth)
+
+    def smart_backspace_event(self, event):
+        text = self.text
+        first, last = self.get_selection_indices()
+        if first and last:
+            text.delete(first, last)
+            text.mark_set("insert", first)
+            return "break"
+        # Delete whitespace left, until hitting a real char or closest
+        # preceding virtual tab stop.
+        chars = text.get("insert linestart", "insert")
+        if chars == '':
+            if text.compare("insert", ">", "1.0"):
+                # easy: delete preceding newline
+                text.delete("insert-1c")
+            else:
+                text.bell()     # at start of buffer
+            return "break"
+        if  chars[-1] not in " \t":
+            # easy: delete preceding real char
+            text.delete("insert-1c")
+            return "break"
+        # Ick.  It may require *inserting* spaces if we back up over a
+        # tab character!  This is written to be clear, not fast.
+        tabwidth = self.tabwidth
+        have = len(chars.expandtabs(tabwidth))
+        assert have > 0
+        want = ((have - 1) // self.indentwidth) * self.indentwidth
+        # Debug prompt is multilined....
+        ncharsdeleted = 0
+        while True:
+            chars = chars[:-1]
+            ncharsdeleted = ncharsdeleted + 1
+            have = len(chars.expandtabs(tabwidth))
+            if have <= want or chars[-1] not in " \t":
+                break
+        text.undo_block_start()
+        text.delete("insert-%dc" % ncharsdeleted, "insert")
+        if have < want:
+            text.insert("insert", ' ' * (want - have),
+                        self.user_input_insert_tags)
+        text.undo_block_stop()
+        return "break"
+
+    def smart_indent_event(self, event):
+        # if intraline selection:
+        #     delete it
+        # elif multiline selection:
+        #     do indent-region
+        # else:
+        #     indent one level
+        text = self.text
+        first, last = self.get_selection_indices()
+        text.undo_block_start()
+        try:
+            if first and last:
+                if index2line(first) != index2line(last):
+                    return self.fregion.indent_region_event(event)
+                text.delete(first, last)
+                text.mark_set("insert", first)
+            prefix = text.get("insert linestart", "insert")
+            raw, effective = get_line_indent(prefix, self.tabwidth)
+            if raw == len(prefix):
+                # only whitespace to the left
+                self.reindent_to(effective + self.indentwidth)
+            else:
+                # tab to the next 'stop' within or to right of line's text:
+                if self.usetabs:
+                    pad = '\t'
+                else:
+                    effective = len(prefix.expandtabs(self.tabwidth))
+                    n = self.indentwidth
+                    pad = ' ' * (n - effective % n)
+                text.insert("insert", pad, self.user_input_insert_tags)
+            text.see("insert")
+            return "break"
+        finally:
+            text.undo_block_stop()
+
+    def newline_and_indent_event(self, event):
+        """Insert a newline and indentation after Enter keypress event.
+
+        Properly position the cursor on the new line based on information
+        from the current line.  This takes into account if the current line
+        is a shell prompt, is empty, has selected text, contains a block
+        opener, contains a block closer, is a continuation line, or
+        is inside a string.
+        """
+        text = self.text
+        first, last = self.get_selection_indices()
+        text.undo_block_start()
+        try:  # Close undo block and expose new line in finally clause.
+            if first and last:
+                text.delete(first, last)
+                text.mark_set("insert", first)
+            line = text.get("insert linestart", "insert")
+
+            # Count leading whitespace for indent size.
+            i, n = 0, len(line)
+            while i < n and line[i] in " \t":
+                i += 1
+            if i == n:
+                # The cursor is in or at leading indentation in a continuation
+                # line; just inject an empty line at the start.
+                text.insert("insert linestart", '\n',
+                            self.user_input_insert_tags)
+                return "break"
+            indent = line[:i]
+
+            # Strip whitespace before insert point unless it's in the prompt.
+            i = 0
+            while line and line[-1] in " \t":
+                line = line[:-1]
+                i += 1
+            if i:
+                text.delete("insert - %d chars" % i, "insert")
+
+            # Strip whitespace after insert point.
+            while text.get("insert") in " \t":
+                text.delete("insert")
+
+            # Insert new line.
+            text.insert("insert", '\n', self.user_input_insert_tags)
+
+            # Adjust indentation for continuations and block open/close.
+            # First need to find the last statement.
+            lno = index2line(text.index('insert'))
+            y = pyparse.Parser(self.indentwidth, self.tabwidth)
+            if not self.prompt_last_line:
+                for context in self.num_context_lines:
+                    startat = max(lno - context, 1)
+                    startatindex = repr(startat) + ".0"
+                    rawtext = text.get(startatindex, "insert")
+                    y.set_code(rawtext)
+                    bod = y.find_good_parse_start(
+                            self._build_char_in_string_func(startatindex))
+                    if bod is not None or startat == 1:
+                        break
+                y.set_lo(bod or 0)
+            else:
+                r = text.tag_prevrange("console", "insert")
+                if r:
+                    startatindex = r[1]
+                else:
+                    startatindex = "1.0"
+                rawtext = text.get(startatindex, "insert")
+                y.set_code(rawtext)
+                y.set_lo(0)
+
+            c = y.get_continuation_type()
+            if c != pyparse.C_NONE:
+                # The current statement hasn't ended yet.
+                if c == pyparse.C_STRING_FIRST_LINE:
+                    # After the first line of a string do not indent at all.
+                    pass
+                elif c == pyparse.C_STRING_NEXT_LINES:
+                    # Inside a string which started before this line;
+                    # just mimic the current indent.
+                    text.insert("insert", indent, self.user_input_insert_tags)
+                elif c == pyparse.C_BRACKET:
+                    # Line up with the first (if any) element of the
+                    # last open bracket structure; else indent one
+                    # level beyond the indent of the line with the
+                    # last open bracket.
+                    self.reindent_to(y.compute_bracket_indent())
+                elif c == pyparse.C_BACKSLASH:
+                    # If more than one line in this statement already, just
+                    # mimic the current indent; else if initial line
+                    # has a start on an assignment stmt, indent to
+                    # beyond leftmost =; else to beyond first chunk of
+                    # non-whitespace on initial line.
+                    if y.get_num_lines_in_stmt() > 1:
+                        text.insert("insert", indent,
+                                    self.user_input_insert_tags)
+                    else:
+                        self.reindent_to(y.compute_backslash_indent())
+                else:
+                    assert 0, f"bogus continuation type {c!r}"
+                return "break"
+
+            # This line starts a brand new statement; indent relative to
+            # indentation of initial line of closest preceding
+            # interesting statement.
+            indent = y.get_base_indent_string()
+            text.insert("insert", indent, self.user_input_insert_tags)
+            if y.is_block_opener():
+                self.smart_indent_event(event)
+            elif indent and y.is_block_closer():
+                self.smart_backspace_event(event)
+            return "break"
+        finally:
+            text.see("insert")
+            text.undo_block_stop()
+
+    # Our editwin provides an is_char_in_string function that works
+    # with a Tk text index, but PyParse only knows about offsets into
+    # a string. This builds a function for PyParse that accepts an
+    # offset.
+
+    def _build_char_in_string_func(self, startindex):
+        def inner(offset, _startindex=startindex,
+                  _icis=self.is_char_in_string):
+            return _icis(_startindex + "+%dc" % offset)
+        return inner
+
+    # XXX this isn't bound to anything -- see tabwidth comments
+##     def change_tabwidth_event(self, event):
+##         new = self._asktabwidth()
+##         if new != self.tabwidth:
+##             self.tabwidth = new
+##             self.set_indentation_params(0, guess=0)
+##         return "break"
+
+    # Make string that displays as n leading blanks.
+
+    def _make_blanks(self, n):
+        if self.usetabs:
+            ntabs, nspaces = divmod(n, self.tabwidth)
+            return '\t' * ntabs + ' ' * nspaces
+        else:
+            return ' ' * n
+
+    # Delete from beginning of line to insert point, then reinsert
+    # column logical (meaning use tabs if appropriate) spaces.
+
+    def reindent_to(self, column):
+        text = self.text
+        text.undo_block_start()
+        if text.compare("insert linestart", "!=", "insert"):
+            text.delete("insert linestart", "insert")
+        if column:
+            text.insert("insert", self._make_blanks(column),
+                        self.user_input_insert_tags)
+        text.undo_block_stop()
+
+    # Guess indentwidth from text content.
+    # Return guessed indentwidth.  This should not be believed unless
+    # it's in a reasonable range (e.g., it will be 0 if no indented
+    # blocks are found).
+
+    def guess_indent(self):
+        opener, indented = IndentSearcher(self.text).run()
+        if opener and indented:
+            raw, indentsmall = get_line_indent(opener, self.tabwidth)
+            raw, indentlarge = get_line_indent(indented, self.tabwidth)
+        else:
+            indentsmall = indentlarge = 0
+        return indentlarge - indentsmall
+
+    def toggle_line_numbers_event(self, event=None):
+        if self.line_numbers is None:
+            return
+
+        if self.line_numbers.is_shown:
+            self.line_numbers.hide_sidebar()
+            menu_label = "Show"
+        else:
+            self.line_numbers.show_sidebar()
+            menu_label = "Hide"
+        self.update_menu_label(menu='options', index='*ine*umbers',
+                               label=f'{menu_label} Line Numbers')
+
+# "line.col" -> line, as an int
+def index2line(index):
+    return int(float(index))
+
+
+_line_indent_re = re.compile(r'[ \t]*')
+def get_line_indent(line, tabwidth):
+    """Return a line's indentation as (# chars, effective # of spaces).
+
+    The effective # of spaces is the length after properly "expanding"
+    the tabs into spaces, as done by str.expandtabs(tabwidth).
+    """
+    m = _line_indent_re.match(line)
+    return m.end(), len(m.group().expandtabs(tabwidth))
+
+
+class IndentSearcher:
+    "Manage initial indent guess, returned by run method."
+
+    def __init__(self, text):
+        self.text = text
+        self.i = self.finished = 0
+        self.blkopenline = self.indentedline = None
+
+    def readline(self):
+        if self.finished:
+            return ""
+        i = self.i = self.i + 1
+        mark = repr(i) + ".0"
+        if self.text.compare(mark, ">=", "end"):
+            return ""
+        return self.text.get(mark, mark + " lineend+1c")
+
+    def tokeneater(self, type, token, start, end, line,
+                   INDENT=tokenize.INDENT,
+                   NAME=tokenize.NAME,
+                   OPENERS=('class', 'def', 'for', 'if', 'match', 'try',
+                            'while', 'with')):
+        if self.finished:
+            pass
+        elif type == NAME and token in OPENERS:
+            self.blkopenline = line
+        elif type == INDENT and self.blkopenline:
+            self.indentedline = line
+            self.finished = 1
+
+    def run(self):
+        """Return 2 lines containing block opener and indent.
+
+        Either the indent line or both may be None.
+        """
+        try:
+            tokens = tokenize.generate_tokens(self.readline)
+            for token in tokens:
+                self.tokeneater(*token)
+        except (tokenize.TokenError, SyntaxError):
+            # Stopping the tokenizer early can trigger spurious errors.
+            pass
+        return self.blkopenline, self.indentedline
+
+### end autoindent code ###
+
+
+def prepstr(s):
+    """Extract the underscore from a string.
+
+    For example, prepstr("Co_py") returns (2, "Copy").
+
+    Args:
+        s: String with underscore.
+
+    Returns:
+        Tuple of (position of underscore, string without underscore).
+    """
+    i = s.find('_')
+    if i >= 0:
+        s = s[:i] + s[i+1:]
+    return i, s
+
+
+keynames = {
+ 'bracketleft': '[',
+ 'bracketright': ']',
+ 'slash': '/',
+}
+
+def get_accelerator(keydefs, eventname):
+    """Return a formatted string for the keybinding of an event.
+
+    Convert the first keybinding for a given event to a form that
+    can be displayed as an accelerator on the menu.
+
+    Args:
+        keydefs: Dictionary of valid events to keybindings.
+        eventname: Event to retrieve keybinding for.
+
+    Returns:
+        Formatted string of the keybinding.
+    """
+    keylist = keydefs.get(eventname)
+    # issue10940: temporary workaround to prevent hang with OS X Cocoa Tk 8.5
+    # if not keylist:
+    if (not keylist) or (macosx.isCocoaTk() and eventname in {
+                            "<<open-module>>",
+                            "<<goto-line>>",
+                            "<<change-indentwidth>>"}):
+        return ""
+    s = keylist[0]
+    # Convert strings of the form -singlelowercase to -singleuppercase.
+    s = re.sub(r"-[a-z]\b", lambda m: m.group().upper(), s)
+    # Convert certain keynames to their symbol.
+    s = re.sub(r"\b\w+\b", lambda m: keynames.get(m.group(), m.group()), s)
+    # Remove Key- from string.
+    s = re.sub("Key-", "", s)
+    # Convert Cancel to Ctrl-Break.
+    s = re.sub("Cancel", "Ctrl-Break", s)   # dscherer@cmu.edu
+    # Convert Control to Ctrl-.
+    s = re.sub("Control-", "Ctrl-", s)
+    # Change - to +.
+    s = re.sub("-", "+", s)
+    # Change >< to space.
+    s = re.sub("><", " ", s)
+    # Remove <.
+    s = re.sub("<", "", s)
+    # Remove >.
+    s = re.sub(">", "", s)
+    return s
+
+
+def fixwordbreaks(root):
+    # On Windows, tcl/tk breaks 'words' only on spaces, as in Command Prompt.
+    # We want Motif style everywhere. See #21474, msg218992 and followup.
+    tk = root.tk
+    tk.call('tcl_wordBreakAfter', 'a b', 0) # make sure word.tcl is loaded
+    tk.call('set', 'tcl_wordchars', r'\w')
+    tk.call('set', 'tcl_nonwordchars', r'\W')
+
+
+def _editor_window(parent):  # htest #
+    # error if close master window first - timer event, after script
+    root = parent
+    fixwordbreaks(root)
+    if sys.argv[1:]:
+        filename = sys.argv[1]
+    else:
+        filename = None
+    macosx.setupApp(root, None)
+    edit = EditorWindow(root=root, filename=filename)
+    text = edit.text
+    text['height'] = 10
+    for i in range(20):
+        text.insert('insert', '  '*i + str(i) + '\n')
+    # text.bind("<<close-all-windows>>", edit.close_event)
+    # Does not stop error, neither does following
+    # edit.text.bind("<<close-window>>", edit.close_event)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_editor', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_editor_window)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/extend.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/extend.txt
new file mode 100644
index 0000000000000000000000000000000000000000..2522758ceb4f706c45836ac9a6f55fe89b1a6168
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/extend.txt
@@ -0,0 +1,83 @@
+Writing an IDLE extension
+=========================
+
+An IDLE extension can define new key bindings and menu entries for IDLE
+edit windows.  There is a simple mechanism to load extensions when IDLE
+starts up and to attach them to each edit window. (It is also possible
+to make other changes to IDLE, but this must be done by editing the IDLE
+source code.)
+
+The list of extensions loaded at startup time is configured by editing
+the file config-extensions.def.  See below for details.
+
+An IDLE extension is defined by a class.  Methods of the class define
+actions that are invoked by event bindings or menu entries. Class (or
+instance) variables define the bindings and menu additions; these are
+automatically applied by IDLE when the extension is linked to an edit
+window.
+
+An IDLE extension class is instantiated with a single argument,
+`editwin', an EditorWindow instance. The extension cannot assume much
+about this argument, but it is guaranteed to have the following instance
+variables:
+
+    text	a Text instance (a widget)
+    io		an IOBinding instance (more about this later)
+    flist	the FileList instance (shared by all edit windows)
+
+(There are a few more, but they are rarely useful.)
+
+The extension class must not directly bind Window Manager (e.g. X) events.
+Rather, it must define one or more virtual events, e.g. <<z-in>>, and
+corresponding methods, e.g. z_in_event().  The virtual events will be
+bound to the corresponding methods, and Window Manager events can then be bound
+to the virtual events. (This indirection is done so that the key bindings can
+easily be changed, and so that other sources of virtual events can exist, such
+as menu entries.)
+
+An extension can define menu entries.  This is done with a class or instance
+variable named menudefs; it should be a list of pairs, where each pair is a
+menu name (lowercase) and a list of menu entries. Each menu entry is either
+None (to insert a separator entry) or a pair of strings (menu_label,
+virtual_event).  Here, menu_label is the label of the menu entry, and
+virtual_event is the virtual event to be generated when the entry is selected.
+An underscore in the menu label is removed; the character following the
+underscore is displayed underlined, to indicate the shortcut character (for
+Windows).
+
+At the moment, extensions cannot define whole new menus; they must define
+entries in existing menus.  Some menus are not present on some windows; such
+entry definitions are then ignored, but key bindings are still applied.  (This
+should probably be refined in the future.)
+
+Extensions are not required to define menu entries for all the events they
+implement.  (They are also not required to create keybindings, but in that
+case there must be empty bindings in config-extensions.def)
+
+Here is a partial example from zzdummy.py:
+
+class ZzDummy:
+
+    menudefs = [
+        ('format', [
+            ('Z in', '<<z-in>>'),
+            ('Z out', '<<z-out>>'),
+        ] )
+    ]
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+
+    def z_in_event(self, event=None):
+        "...Do what you want here..."
+
+The final piece of the puzzle is the file "config-extensions.def", which is
+used to configure the loading of extensions and to establish key (or, more
+generally, event) bindings to the virtual events defined in the extensions.
+
+See the comments at the top of config-extensions.def for information.  It's
+currently necessary to manually modify that file to change IDLE's extension
+loading or extension key bindings.
+
+For further information on binding refer to the Tkinter Resources web page at
+python.org and to the Tk Command "bind" man page.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/filelist.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/filelist.py
new file mode 100644
index 0000000000000000000000000000000000000000..e27e5d32a0ff633e3c0973d3758135f80ee7972b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/filelist.py
@@ -0,0 +1,132 @@
+"idlelib.filelist"
+
+import os
+from tkinter import messagebox
+
+
+class FileList:
+
+    # N.B. this import overridden in PyShellFileList.
+    from idlelib.editor import EditorWindow
+
+    def __init__(self, root):
+        self.root = root
+        self.dict = {}
+        self.inversedict = {}
+        self.vars = {} # For EditorWindow.getrawvar (shared Tcl variables)
+
+    def open(self, filename, action=None):
+        assert filename
+        filename = self.canonize(filename)
+        if os.path.isdir(filename):
+            # This can happen when bad filename is passed on command line:
+            messagebox.showerror(
+                "File Error",
+                f"{filename!r} is a directory.",
+                master=self.root)
+            return None
+        key = os.path.normcase(filename)
+        if key in self.dict:
+            edit = self.dict[key]
+            edit.top.wakeup()
+            return edit
+        if action:
+            # Don't create window, perform 'action', e.g. open in same window
+            return action(filename)
+        else:
+            edit = self.EditorWindow(self, filename, key)
+            if edit.good_load:
+                return edit
+            else:
+                edit._close()
+                return None
+
+    def gotofileline(self, filename, lineno=None):
+        edit = self.open(filename)
+        if edit is not None and lineno is not None:
+            edit.gotoline(lineno)
+
+    def new(self, filename=None):
+        return self.EditorWindow(self, filename)
+
+    def close_all_callback(self, *args, **kwds):
+        for edit in list(self.inversedict):
+            reply = edit.close()
+            if reply == "cancel":
+                break
+        return "break"
+
+    def unregister_maybe_terminate(self, edit):
+        try:
+            key = self.inversedict[edit]
+        except KeyError:
+            print("Don't know this EditorWindow object.  (close)")
+            return
+        if key:
+            del self.dict[key]
+        del self.inversedict[edit]
+        if not self.inversedict:
+            self.root.quit()
+
+    def filename_changed_edit(self, edit):
+        edit.saved_change_hook()
+        try:
+            key = self.inversedict[edit]
+        except KeyError:
+            print("Don't know this EditorWindow object.  (rename)")
+            return
+        filename = edit.io.filename
+        if not filename:
+            if key:
+                del self.dict[key]
+            self.inversedict[edit] = None
+            return
+        filename = self.canonize(filename)
+        newkey = os.path.normcase(filename)
+        if newkey == key:
+            return
+        if newkey in self.dict:
+            conflict = self.dict[newkey]
+            self.inversedict[conflict] = None
+            messagebox.showerror(
+                "Name Conflict",
+                f"You now have multiple edit windows open for {filename!r}",
+                master=self.root)
+        self.dict[newkey] = edit
+        self.inversedict[edit] = newkey
+        if key:
+            try:
+                del self.dict[key]
+            except KeyError:
+                pass
+
+    def canonize(self, filename):
+        if not os.path.isabs(filename):
+            try:
+                pwd = os.getcwd()
+            except OSError:
+                pass
+            else:
+                filename = os.path.join(pwd, filename)
+        return os.path.normpath(filename)
+
+
+def _test():  # TODO check and convert to htest
+    from tkinter import Tk
+    from idlelib.editor import fixwordbreaks
+    from idlelib.run import fix_scaling
+    root = Tk()
+    fix_scaling(root)
+    fixwordbreaks(root)
+    root.withdraw()
+    flist = FileList(root)
+    flist.new()
+    if flist.inversedict:
+        root.mainloop()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_filelist', verbosity=2)
+
+#    _test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/format.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/format.py
new file mode 100644
index 0000000000000000000000000000000000000000..4b57a182c9a49d37b308d65f4d3ed175bbe0d631
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/format.py
@@ -0,0 +1,426 @@
+"""Format all or a selected region (line slice) of text.
+
+Region formatting options: paragraph, comment block, indent, deindent,
+comment, uncomment, tabify, and untabify.
+
+File renamed from paragraph.py with functions added from editor.py.
+"""
+import re
+from tkinter.messagebox import askyesno
+from tkinter.simpledialog import askinteger
+from idlelib.config import idleConf
+
+
+class FormatParagraph:
+    """Format a paragraph, comment block, or selection to a max width.
+
+    Does basic, standard text formatting, and also understands Python
+    comment blocks. Thus, for editing Python source code, this
+    extension is really only suitable for reformatting these comment
+    blocks or triple-quoted strings.
+
+    Known problems with comment reformatting:
+    * If there is a selection marked, and the first line of the
+      selection is not complete, the block will probably not be detected
+      as comments, and will have the normal "text formatting" rules
+      applied.
+    * If a comment block has leading whitespace that mixes tabs and
+      spaces, they will not be considered part of the same block.
+    * Fancy comments, like this bulleted list, aren't handled :-)
+    """
+    def __init__(self, editwin):
+        self.editwin = editwin
+
+    @classmethod
+    def reload(cls):
+        cls.max_width = idleConf.GetOption('extensions', 'FormatParagraph',
+                                           'max-width', type='int', default=72)
+
+    def close(self):
+        self.editwin = None
+
+    def format_paragraph_event(self, event, limit=None):
+        """Formats paragraph to a max width specified in idleConf.
+
+        If text is selected, format_paragraph_event will start breaking lines
+        at the max width, starting from the beginning selection.
+
+        If no text is selected, format_paragraph_event uses the current
+        cursor location to determine the paragraph (lines of text surrounded
+        by blank lines) and formats it.
+
+        The length limit parameter is for testing with a known value.
+        """
+        limit = self.max_width if limit is None else limit
+        text = self.editwin.text
+        first, last = self.editwin.get_selection_indices()
+        if first and last:
+            data = text.get(first, last)
+            comment_header = get_comment_header(data)
+        else:
+            first, last, comment_header, data = \
+                    find_paragraph(text, text.index("insert"))
+        if comment_header:
+            newdata = reformat_comment(data, limit, comment_header)
+        else:
+            newdata = reformat_paragraph(data, limit)
+        text.tag_remove("sel", "1.0", "end")
+
+        if newdata != data:
+            text.mark_set("insert", first)
+            text.undo_block_start()
+            text.delete(first, last)
+            text.insert(first, newdata)
+            text.undo_block_stop()
+        else:
+            text.mark_set("insert", last)
+        text.see("insert")
+        return "break"
+
+
+FormatParagraph.reload()
+
+def find_paragraph(text, mark):
+    """Returns the start/stop indices enclosing the paragraph that mark is in.
+
+    Also returns the comment format string, if any, and paragraph of text
+    between the start/stop indices.
+    """
+    lineno, col = map(int, mark.split("."))
+    line = text.get("%d.0" % lineno, "%d.end" % lineno)
+
+    # Look for start of next paragraph if the index passed in is a blank line
+    while text.compare("%d.0" % lineno, "<", "end") and is_all_white(line):
+        lineno = lineno + 1
+        line = text.get("%d.0" % lineno, "%d.end" % lineno)
+    first_lineno = lineno
+    comment_header = get_comment_header(line)
+    comment_header_len = len(comment_header)
+
+    # Once start line found, search for end of paragraph (a blank line)
+    while get_comment_header(line)==comment_header and \
+              not is_all_white(line[comment_header_len:]):
+        lineno = lineno + 1
+        line = text.get("%d.0" % lineno, "%d.end" % lineno)
+    last = "%d.0" % lineno
+
+    # Search back to beginning of paragraph (first blank line before)
+    lineno = first_lineno - 1
+    line = text.get("%d.0" % lineno, "%d.end" % lineno)
+    while lineno > 0 and \
+              get_comment_header(line)==comment_header and \
+              not is_all_white(line[comment_header_len:]):
+        lineno = lineno - 1
+        line = text.get("%d.0" % lineno, "%d.end" % lineno)
+    first = "%d.0" % (lineno+1)
+
+    return first, last, comment_header, text.get(first, last)
+
+# This should perhaps be replaced with textwrap.wrap
+def reformat_paragraph(data, limit):
+    """Return data reformatted to specified width (limit)."""
+    lines = data.split("\n")
+    i = 0
+    n = len(lines)
+    while i < n and is_all_white(lines[i]):
+        i = i+1
+    if i >= n:
+        return data
+    indent1 = get_indent(lines[i])
+    if i+1 < n and not is_all_white(lines[i+1]):
+        indent2 = get_indent(lines[i+1])
+    else:
+        indent2 = indent1
+    new = lines[:i]
+    partial = indent1
+    while i < n and not is_all_white(lines[i]):
+        # XXX Should take double space after period (etc.) into account
+        words = re.split(r"(\s+)", lines[i])
+        for j in range(0, len(words), 2):
+            word = words[j]
+            if not word:
+                continue # Can happen when line ends in whitespace
+            if len((partial + word).expandtabs()) > limit and \
+                   partial != indent1:
+                new.append(partial.rstrip())
+                partial = indent2
+            partial = partial + word + " "
+            if j+1 < len(words) and words[j+1] != " ":
+                partial = partial + " "
+        i = i+1
+    new.append(partial.rstrip())
+    # XXX Should reformat remaining paragraphs as well
+    new.extend(lines[i:])
+    return "\n".join(new)
+
+def reformat_comment(data, limit, comment_header):
+    """Return data reformatted to specified width with comment header."""
+
+    # Remove header from the comment lines
+    lc = len(comment_header)
+    data = "\n".join(line[lc:] for line in data.split("\n"))
+    # Reformat to maxformatwidth chars or a 20 char width,
+    # whichever is greater.
+    format_width = max(limit - len(comment_header), 20)
+    newdata = reformat_paragraph(data, format_width)
+    # re-split and re-insert the comment header.
+    newdata = newdata.split("\n")
+    # If the block ends in a \n, we don't want the comment prefix
+    # inserted after it. (Im not sure it makes sense to reformat a
+    # comment block that is not made of complete lines, but whatever!)
+    # Can't think of a clean solution, so we hack away
+    block_suffix = ""
+    if not newdata[-1]:
+        block_suffix = "\n"
+        newdata = newdata[:-1]
+    return '\n'.join(comment_header+line for line in newdata) + block_suffix
+
+def is_all_white(line):
+    """Return True if line is empty or all whitespace."""
+
+    return re.match(r"^\s*$", line) is not None
+
+def get_indent(line):
+    """Return the initial space or tab indent of line."""
+    return re.match(r"^([ \t]*)", line).group()
+
+def get_comment_header(line):
+    """Return string with leading whitespace and '#' from line or ''.
+
+    A null return indicates that the line is not a comment line. A non-
+    null return, such as '    #', will be used to find the other lines of
+    a comment block with the same  indent.
+    """
+    m = re.match(r"^([ \t]*#*)", line)
+    if m is None: return ""
+    return m.group(1)
+
+
+# Copied from editor.py; importing it would cause an import cycle.
+_line_indent_re = re.compile(r'[ \t]*')
+
+def get_line_indent(line, tabwidth):
+    """Return a line's indentation as (# chars, effective # of spaces).
+
+    The effective # of spaces is the length after properly "expanding"
+    the tabs into spaces, as done by str.expandtabs(tabwidth).
+    """
+    m = _line_indent_re.match(line)
+    return m.end(), len(m.group().expandtabs(tabwidth))
+
+
+class FormatRegion:
+    "Format selected text (region)."
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+
+    def get_region(self):
+        """Return line information about the selected text region.
+
+        If text is selected, the first and last indices will be
+        for the selection.  If there is no text selected, the
+        indices will be the current cursor location.
+
+        Return a tuple containing (first index, last index,
+            string representation of text, list of text lines).
+        """
+        text = self.editwin.text
+        first, last = self.editwin.get_selection_indices()
+        if first and last:
+            head = text.index(first + " linestart")
+            tail = text.index(last + "-1c lineend +1c")
+        else:
+            head = text.index("insert linestart")
+            tail = text.index("insert lineend +1c")
+        chars = text.get(head, tail)
+        lines = chars.split("\n")
+        return head, tail, chars, lines
+
+    def set_region(self, head, tail, chars, lines):
+        """Replace the text between the given indices.
+
+        Args:
+            head: Starting index of text to replace.
+            tail: Ending index of text to replace.
+            chars: Expected to be string of current text
+                between head and tail.
+            lines: List of new lines to insert between head
+                and tail.
+        """
+        text = self.editwin.text
+        newchars = "\n".join(lines)
+        if newchars == chars:
+            text.bell()
+            return
+        text.tag_remove("sel", "1.0", "end")
+        text.mark_set("insert", head)
+        text.undo_block_start()
+        text.delete(head, tail)
+        text.insert(head, newchars)
+        text.undo_block_stop()
+        text.tag_add("sel", head, "insert")
+
+    def indent_region_event(self, event=None):
+        "Indent region by indentwidth spaces."
+        head, tail, chars, lines = self.get_region()
+        for pos in range(len(lines)):
+            line = lines[pos]
+            if line:
+                raw, effective = get_line_indent(line, self.editwin.tabwidth)
+                effective = effective + self.editwin.indentwidth
+                lines[pos] = self.editwin._make_blanks(effective) + line[raw:]
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def dedent_region_event(self, event=None):
+        "Dedent region by indentwidth spaces."
+        head, tail, chars, lines = self.get_region()
+        for pos in range(len(lines)):
+            line = lines[pos]
+            if line:
+                raw, effective = get_line_indent(line, self.editwin.tabwidth)
+                effective = max(effective - self.editwin.indentwidth, 0)
+                lines[pos] = self.editwin._make_blanks(effective) + line[raw:]
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def comment_region_event(self, event=None):
+        """Comment out each line in region.
+
+        ## is appended to the beginning of each line to comment it out.
+        """
+        head, tail, chars, lines = self.get_region()
+        for pos in range(len(lines) - 1):
+            line = lines[pos]
+            lines[pos] = '##' + line
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def uncomment_region_event(self, event=None):
+        """Uncomment each line in region.
+
+        Remove ## or # in the first positions of a line.  If the comment
+        is not in the beginning position, this command will have no effect.
+        """
+        head, tail, chars, lines = self.get_region()
+        for pos in range(len(lines)):
+            line = lines[pos]
+            if not line:
+                continue
+            if line[:2] == '##':
+                line = line[2:]
+            elif line[:1] == '#':
+                line = line[1:]
+            lines[pos] = line
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def tabify_region_event(self, event=None):
+        "Convert leading spaces to tabs for each line in selected region."
+        head, tail, chars, lines = self.get_region()
+        tabwidth = self._asktabwidth()
+        if tabwidth is None:
+            return
+        for pos in range(len(lines)):
+            line = lines[pos]
+            if line:
+                raw, effective = get_line_indent(line, tabwidth)
+                ntabs, nspaces = divmod(effective, tabwidth)
+                lines[pos] = '\t' * ntabs + ' ' * nspaces + line[raw:]
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def untabify_region_event(self, event=None):
+        "Expand tabs to spaces for each line in region."
+        head, tail, chars, lines = self.get_region()
+        tabwidth = self._asktabwidth()
+        if tabwidth is None:
+            return
+        for pos in range(len(lines)):
+            lines[pos] = lines[pos].expandtabs(tabwidth)
+        self.set_region(head, tail, chars, lines)
+        return "break"
+
+    def _asktabwidth(self):
+        "Return value for tab width."
+        return askinteger(
+            "Tab width",
+            "Columns per tab? (2-16)",
+            parent=self.editwin.text,
+            initialvalue=self.editwin.indentwidth,
+            minvalue=2,
+            maxvalue=16)
+
+
+class Indents:
+    "Change future indents."
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+
+    def toggle_tabs_event(self, event):
+        editwin = self.editwin
+        usetabs = editwin.usetabs
+        if askyesno(
+              "Toggle tabs",
+              "Turn tabs " + ("on", "off")[usetabs] +
+              "?\nIndent width " +
+              ("will be", "remains at")[usetabs] + " 8." +
+              "\n Note: a tab is always 8 columns",
+              parent=editwin.text):
+            editwin.usetabs = not usetabs
+            # Try to prevent inconsistent indentation.
+            # User must change indent width manually after using tabs.
+            editwin.indentwidth = 8
+        return "break"
+
+    def change_indentwidth_event(self, event):
+        editwin = self.editwin
+        new = askinteger(
+                  "Indent width",
+                  "New indent width (2-16)\n(Always use 8 when using tabs)",
+                  parent=editwin.text,
+                  initialvalue=editwin.indentwidth,
+                  minvalue=2,
+                  maxvalue=16)
+        if new and new != editwin.indentwidth and not editwin.usetabs:
+            editwin.indentwidth = new
+        return "break"
+
+
+class Rstrip:  # 'Strip Trailing Whitespace" on "Format" menu.
+    def __init__(self, editwin):
+        self.editwin = editwin
+
+    def do_rstrip(self, event=None):
+        text = self.editwin.text
+        undo = self.editwin.undo
+        undo.undo_block_start()
+
+        end_line = int(float(text.index('end')))
+        for cur in range(1, end_line):
+            txt = text.get('%i.0' % cur, '%i.end' % cur)
+            raw = len(txt)
+            cut = len(txt.rstrip())
+            # Since text.delete() marks file as changed, even if not,
+            # only call it when needed to actually delete something.
+            if cut < raw:
+                text.delete('%i.%i' % (cur, cut), '%i.end' % cur)
+
+        if (text.get('end-2c') == '\n'  # File ends with at least 1 newline;
+            and not hasattr(self.editwin, 'interp')):  # & is not Shell.
+            # Delete extra user endlines.
+            while (text.index('end-1c') > '1.0'  # Stop if file empty.
+                   and text.get('end-3c') == '\n'):
+                text.delete('end-3c')
+            # Because tk indexes are slice indexes and never raise,
+            # a file with only newlines will be emptied.
+            # patchcheck.py does the same.
+
+        undo.undo_block_stop()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_format', verbosity=2, exit=False)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/grep.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/grep.py
new file mode 100644
index 0000000000000000000000000000000000000000..42048ff2395fe1950d11547d05f896ff61c37a61
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/grep.py
@@ -0,0 +1,223 @@
+"""Grep dialog for Find in Files functionality.
+
+   Inherits from SearchDialogBase for GUI and uses searchengine
+   to prepare search pattern.
+"""
+import fnmatch
+import os
+import sys
+
+from tkinter import StringVar, BooleanVar
+from tkinter.ttk import Checkbutton  # Frame imported in ...Base
+
+from idlelib.searchbase import SearchDialogBase
+from idlelib import searchengine
+
+# Importing OutputWindow here fails due to import loop
+# EditorWindow -> GrepDialog -> OutputWindow -> EditorWindow
+
+
+def grep(text, io=None, flist=None):
+    """Open the Find in Files dialog.
+
+    Module-level function to access the singleton GrepDialog
+    instance and open the dialog.  If text is selected, it is
+    used as the search phrase; otherwise, the previous entry
+    is used.
+
+    Args:
+        text: Text widget that contains the selected text for
+              default search phrase.
+        io: iomenu.IOBinding instance with default path to search.
+        flist: filelist.FileList instance for OutputWindow parent.
+    """
+    root = text._root()
+    engine = searchengine.get(root)
+    if not hasattr(engine, "_grepdialog"):
+        engine._grepdialog = GrepDialog(root, engine, flist)
+    dialog = engine._grepdialog
+    searchphrase = text.get("sel.first", "sel.last")
+    dialog.open(text, searchphrase, io)
+
+
+def walk_error(msg):
+    "Handle os.walk error."
+    print(msg)
+
+
+def findfiles(folder, pattern, recursive):
+    """Generate file names in dir that match pattern.
+
+    Args:
+        folder: Root directory to search.
+        pattern: File pattern to match.
+        recursive: True to include subdirectories.
+    """
+    for dirpath, _, filenames in os.walk(folder, onerror=walk_error):
+        yield from (os.path.join(dirpath, name)
+                    for name in filenames
+                    if fnmatch.fnmatch(name, pattern))
+        if not recursive:
+            break
+
+
+class GrepDialog(SearchDialogBase):
+    "Dialog for searching multiple files."
+
+    title = "Find in Files Dialog"
+    icon = "Grep"
+    needwrapbutton = 0
+
+    def __init__(self, root, engine, flist):
+        """Create search dialog for searching for a phrase in the file system.
+
+        Uses SearchDialogBase as the basis for the GUI and a
+        searchengine instance to prepare the search.
+
+        Attributes:
+            flist: filelist.Filelist instance for OutputWindow parent.
+            globvar: String value of Entry widget for path to search.
+            globent: Entry widget for globvar.  Created in
+                create_entries().
+            recvar: Boolean value of Checkbutton widget for
+                traversing through subdirectories.
+        """
+        super().__init__(root, engine)
+        self.flist = flist
+        self.globvar = StringVar(root)
+        self.recvar = BooleanVar(root)
+
+    def open(self, text, searchphrase, io=None):
+        """Make dialog visible on top of others and ready to use.
+
+        Extend the SearchDialogBase open() to set the initial value
+        for globvar.
+
+        Args:
+            text: Multicall object containing the text information.
+            searchphrase: String phrase to search.
+            io: iomenu.IOBinding instance containing file path.
+        """
+        SearchDialogBase.open(self, text, searchphrase)
+        if io:
+            path = io.filename or ""
+        else:
+            path = ""
+        dir, base = os.path.split(path)
+        head, tail = os.path.splitext(base)
+        if not tail:
+            tail = ".py"
+        self.globvar.set(os.path.join(dir, "*" + tail))
+
+    def create_entries(self):
+        "Create base entry widgets and add widget for search path."
+        SearchDialogBase.create_entries(self)
+        self.globent = self.make_entry("In files:", self.globvar)[0]
+
+    def create_other_buttons(self):
+        "Add check button to recurse down subdirectories."
+        btn = Checkbutton(
+                self.make_frame()[0], variable=self.recvar,
+                text="Recurse down subdirectories")
+        btn.pack(side="top", fill="both")
+
+    def create_command_buttons(self):
+        "Create base command buttons and add button for Search Files."
+        SearchDialogBase.create_command_buttons(self)
+        self.make_button("Search Files", self.default_command, isdef=True)
+
+    def default_command(self, event=None):
+        """Grep for search pattern in file path. The default command is bound
+        to <Return>.
+
+        If entry values are populated, set OutputWindow as stdout
+        and perform search.  The search dialog is closed automatically
+        when the search begins.
+        """
+        prog = self.engine.getprog()
+        if not prog:
+            return
+        path = self.globvar.get()
+        if not path:
+            self.top.bell()
+            return
+        from idlelib.outwin import OutputWindow  # leave here!
+        save = sys.stdout
+        try:
+            sys.stdout = OutputWindow(self.flist)
+            self.grep_it(prog, path)
+        finally:
+            sys.stdout = save
+
+    def grep_it(self, prog, path):
+        """Search for prog within the lines of the files in path.
+
+        For the each file in the path directory, open the file and
+        search each line for the matching pattern.  If the pattern is
+        found,  write the file and line information to stdout (which
+        is an OutputWindow).
+
+        Args:
+            prog: The compiled, cooked search pattern.
+            path: String containing the search path.
+        """
+        folder, filepat = os.path.split(path)
+        if not folder:
+            folder = os.curdir
+        filelist = sorted(findfiles(folder, filepat, self.recvar.get()))
+        self.close()
+        pat = self.engine.getpat()
+        print(f"Searching {pat!r} in {path} ...")
+        hits = 0
+        try:
+            for fn in filelist:
+                try:
+                    with open(fn, errors='replace') as f:
+                        for lineno, line in enumerate(f, 1):
+                            if line[-1:] == '\n':
+                                line = line[:-1]
+                            if prog.search(line):
+                                sys.stdout.write(f"{fn}: {lineno}: {line}\n")
+                                hits += 1
+                except OSError as msg:
+                    print(msg)
+            print(f"Hits found: {hits}\n(Hint: right-click to open locations.)"
+                  if hits else "No hits.")
+        except AttributeError:
+            # Tk window has been closed, OutputWindow.text = None,
+            # so in OW.write, OW.text.insert fails.
+            pass
+
+
+def _grep_dialog(parent):  # htest #
+    from tkinter import Toplevel, Text, SEL
+    from tkinter.ttk import Frame, Button
+    from idlelib.pyshell import PyShellFileList
+
+    top = Toplevel(parent)
+    top.title("Test GrepDialog")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry(f"+{x}+{y + 175}")
+
+    flist = PyShellFileList(top)
+    frame = Frame(top)
+    frame.pack()
+    text = Text(frame, height=5)
+    text.pack()
+    text.insert('1.0', 'import grep')
+
+    def show_grep_dialog():
+        text.tag_add(SEL, "1.0", '1.end')
+        grep(text, flist=flist)
+        text.tag_remove(SEL, "1.0", '1.end')
+
+    button = Button(frame, text="Show GrepDialog", command=show_grep_dialog)
+    button.pack()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_grep', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_grep_dialog)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.html b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.html
new file mode 100644
index 0000000000000000000000000000000000000000..eda16ac5bed118b401af19cb5702028686db065e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.html
@@ -0,0 +1,868 @@
+<section id="idle">
+<span id="idle-python-editor-and-shell"></span><h1>IDLE — Python editor and shell<a class="headerlink" href="#idle" title="Link to this heading">¶</a></h1>
+<p><strong>Source code:</strong> <a class="extlink-source reference external" href="https://github.com/python/cpython/tree/main/Lib/idlelib/">Lib/idlelib/</a></p>
+<span class="target" id="index-0"></span><hr class="docutils" />
+<p>IDLE is Python’s Integrated Development and Learning Environment.</p>
+<p>IDLE has the following features:</p>
+<ul class="simple">
+<li><p>cross-platform: works mostly the same on Windows, Unix, and macOS</p></li>
+<li><p>Python shell window (interactive interpreter) with colorizing
+of code input, output, and error messages</p></li>
+<li><p>multi-window text editor with multiple undo, Python colorizing,
+smart indent, call tips, auto completion, and other features</p></li>
+<li><p>search within any window, replace within editor windows, and search
+through multiple files (grep)</p></li>
+<li><p>debugger with persistent breakpoints, stepping, and viewing
+of global and local namespaces</p></li>
+<li><p>configuration, browsers, and other dialogs</p></li>
+</ul>
+<p>The IDLE application is implemented in the <a class="reference internal" href="#module-idlelib" title="idlelib: Implementation package for the IDLE shell/editor."><code class="xref py py-mod docutils literal notranslate"><span class="pre">idlelib</span></code></a> package.</p>
+<p>This is an <a class="reference internal" href="../glossary.html#term-optional-module"><span class="xref std std-term">optional module</span></a>.
+If it is missing from your copy of CPython,
+look for documentation from your distributor (that is,
+whoever provided Python to you).
+If you are the distributor, see <a class="reference internal" href="../using/configure.html#optional-module-requirements"><span class="std std-ref">Requirements for optional modules</span></a>.</p>
+<section id="menus">
+<h2>Menus<a class="headerlink" href="#menus" title="Link to this heading">¶</a></h2>
+<p>IDLE has two main window types, the Shell window and the Editor window.  It is
+possible to have multiple editor windows simultaneously.  On Windows and
+Linux, each has its own top menu.  Each menu documented below indicates
+which window type it is associated with.</p>
+<p>Output windows, such as used for Edit =&gt; Find in Files, are a subtype of editor
+window.  They currently have the same top menu but a different
+default title and context menu.</p>
+<p>On macOS, there is one application menu.  It dynamically changes according
+to the window currently selected.  It has an IDLE menu, and some entries
+described below are moved around to conform to Apple guidelines.</p>
+<section id="file-menu-shell-and-editor">
+<h3>File menu (Shell and Editor)<a class="headerlink" href="#file-menu-shell-and-editor" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>New File</dt><dd><p>Create a new file editing window.</p>
+</dd>
+<dt>Open…</dt><dd><p>Open an existing file with an Open dialog.</p>
+</dd>
+<dt>Open Module…</dt><dd><p>Open an existing module (searches sys.path).</p>
+</dd>
+<dt>Recent Files</dt><dd><p>Open a list of recent files.  Click one to open it.</p>
+</dd>
+</dl>
+<dl class="simple" id="index-1">
+<dt>Module Browser</dt><dd><p>Show functions, classes, and methods in the current Editor file in a
+tree structure.  In the shell, open a module first.</p>
+</dd>
+<dt>Path Browser</dt><dd><p>Show sys.path directories, modules, functions, classes and methods in a
+tree structure.</p>
+</dd>
+<dt>Save</dt><dd><p>Save the current window to the associated file, if there is one.  Windows
+that have been changed since being opened or last saved have a * before
+and after the window title.  If there is no associated file,
+do Save As instead.</p>
+</dd>
+<dt>Save As…</dt><dd><p>Save the current window with a Save As dialog.  The file saved becomes the
+new associated file for the window. (If your file manager is set to hide
+extensions, the current extension will be omitted in the file name box.
+If the new filename has no ‘.’, ‘.py’ and ‘.txt’ will be added for Python
+and text files, except that on macOS Aqua,’.py’ is added for all files.)</p>
+</dd>
+<dt>Save Copy As…</dt><dd><p>Save the current window to different file without changing the associated
+file.  (See Save As note above about filename extensions.)</p>
+</dd>
+<dt>Print Window</dt><dd><p>Print the current window to the default printer.</p>
+</dd>
+<dt>Close Window</dt><dd><p>Close the current window (if an unsaved editor, ask to save; if an unsaved
+Shell, ask to quit execution).  Calling <code class="docutils literal notranslate"><span class="pre">exit()</span></code> or <code class="docutils literal notranslate"><span class="pre">close()</span></code> in the Shell
+window also closes Shell.  If this is the only window, also exit IDLE.</p>
+</dd>
+<dt>Exit IDLE</dt><dd><p>Close all windows and quit IDLE (ask to save unsaved edit windows).</p>
+</dd>
+</dl>
+</section>
+<section id="edit-menu-shell-and-editor">
+<h3>Edit menu (Shell and Editor)<a class="headerlink" href="#edit-menu-shell-and-editor" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>Undo</dt><dd><p>Undo the last change to the current window.  A maximum of 1000 changes may
+be undone.</p>
+</dd>
+<dt>Redo</dt><dd><p>Redo the last undone change to the current window.</p>
+</dd>
+<dt>Select All</dt><dd><p>Select the entire contents of the current window.</p>
+</dd>
+<dt>Cut</dt><dd><p>Copy selection into the system-wide clipboard; then delete the selection.</p>
+</dd>
+<dt>Copy</dt><dd><p>Copy selection into the system-wide clipboard.</p>
+</dd>
+<dt>Paste</dt><dd><p>Insert contents of the system-wide clipboard into the current window.</p>
+</dd>
+</dl>
+<p>The clipboard functions are also available in context menus.</p>
+<dl class="simple">
+<dt>Find…</dt><dd><p>Open a search dialog with many options</p>
+</dd>
+<dt>Find Again</dt><dd><p>Repeat the last search, if there is one.</p>
+</dd>
+<dt>Find Selection</dt><dd><p>Search for the currently selected string, if there is one.</p>
+</dd>
+<dt>Find in Files…</dt><dd><p>Open a file search dialog.  Put results in a new output window.</p>
+</dd>
+<dt>Replace…</dt><dd><p>Open a search-and-replace dialog.</p>
+</dd>
+<dt>Go to Line</dt><dd><p>Move the cursor to the beginning of the line requested and make that
+line visible.  A request past the end of the file goes to the end.
+Clear any selection and update the line and column status.</p>
+</dd>
+<dt>Show Completions</dt><dd><p>Open a scrollable list allowing selection of existing names. See
+<a class="reference internal" href="#completions"><span class="std std-ref">Completions</span></a> in the Editing and Navigation section below.</p>
+</dd>
+<dt>Expand Word</dt><dd><p>Expand a prefix you have typed to match a full word in the same window;
+repeat to get a different expansion.</p>
+</dd>
+<dt>Show Call Tip</dt><dd><p>After an unclosed parenthesis for a function, open a small window with
+function parameter hints.  See <a class="reference internal" href="#calltips"><span class="std std-ref">Calltips</span></a> in the
+Editing and Navigation section below.</p>
+</dd>
+<dt>Show Surrounding Parens</dt><dd><p>Highlight the surrounding parenthesis.</p>
+</dd>
+</dl>
+</section>
+<section id="format-menu-editor-window-only">
+<span id="format-menu"></span><h3>Format menu (Editor window only)<a class="headerlink" href="#format-menu-editor-window-only" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>Format Paragraph</dt><dd><p>Rewrap the text block containing the text insert cursor.
+Avoid code lines.  See <a class="reference internal" href="#format-block"><span class="std std-ref">Format block</span></a> in the
+Editing and Navigation section below.</p>
+</dd>
+<dt>Indent Region</dt><dd><p>Shift selected lines right by the indent width (default 4 spaces).</p>
+</dd>
+<dt>Dedent Region</dt><dd><p>Shift selected lines left by the indent width (default 4 spaces).</p>
+</dd>
+<dt>Comment Out Region</dt><dd><p>Insert ## in front of selected lines.</p>
+</dd>
+<dt>Uncomment Region</dt><dd><p>Remove leading # or ## from selected lines.</p>
+</dd>
+<dt>Tabify Region</dt><dd><p>Turn <em>leading</em> stretches of spaces into tabs. (Note: We recommend using
+4 space blocks to indent Python code.)</p>
+</dd>
+<dt>Untabify Region</dt><dd><p>Turn <em>all</em> tabs into the correct number of spaces.</p>
+</dd>
+<dt>Toggle Tabs</dt><dd><p>Open a dialog to switch between indenting with spaces and tabs.</p>
+</dd>
+<dt>New Indent Width</dt><dd><p>Open a dialog to change indent width. The accepted default by the Python
+community is 4 spaces.</p>
+</dd>
+<dt>Strip Trailing Whitespace</dt><dd><p>Remove trailing space and other whitespace characters after the last
+non-whitespace character of a line by applying <a class="reference internal" href="stdtypes.html#str.rstrip" title="str.rstrip"><code class="xref py py-meth docutils literal notranslate"><span class="pre">str.rstrip()</span></code></a> to each line,
+including lines within multiline strings.  Except for Shell windows,
+remove extra newlines at the end of the file.</p>
+</dd>
+</dl>
+</section>
+<section id="run-menu-editor-window-only">
+<span id="index-2"></span><h3>Run menu (Editor window only)<a class="headerlink" href="#run-menu-editor-window-only" title="Link to this heading">¶</a></h3>
+<dl class="simple" id="run-module">
+<dt>Run Module</dt><dd><p>Do <a class="reference internal" href="#check-module"><span class="std std-ref">Check Module</span></a>.  If no error, restart the shell to clean the
+environment, then execute the module.  Output is displayed in the Shell
+window.  Note that output requires use of <code class="docutils literal notranslate"><span class="pre">print</span></code> or <code class="docutils literal notranslate"><span class="pre">write</span></code>.
+When execution is complete, the Shell retains focus and displays a prompt.
+At this point, one may interactively explore the result of execution.
+This is similar to executing a file with <code class="docutils literal notranslate"><span class="pre">python</span> <span class="pre">-i</span> <span class="pre">file</span></code> at a command
+line.</p>
+</dd>
+</dl>
+<dl class="simple" id="run-custom">
+<dt>Run… Customized</dt><dd><p>Same as <a class="reference internal" href="#run-module"><span class="std std-ref">Run Module</span></a>, but run the module with customized
+settings.  <em>Command Line Arguments</em> extend <a class="reference internal" href="sys.html#sys.argv" title="sys.argv"><code class="xref py py-data docutils literal notranslate"><span class="pre">sys.argv</span></code></a> as if passed
+on a command line. The module can be run in the Shell without restarting.</p>
+</dd>
+</dl>
+<dl class="simple" id="check-module">
+<dt>Check Module</dt><dd><p>Check the syntax of the module currently open in the Editor window. If the
+module has not been saved IDLE will either prompt the user to save or
+autosave, as selected in the General tab of the Idle Settings dialog.  If
+there is a syntax error, the approximate location is indicated in the
+Editor window.</p>
+</dd>
+</dl>
+<dl class="simple" id="python-shell">
+<dt>Python Shell</dt><dd><p>Open or wake up the Python Shell window.</p>
+</dd>
+</dl>
+</section>
+<section id="shell-menu-shell-window-only">
+<h3>Shell menu (Shell window only)<a class="headerlink" href="#shell-menu-shell-window-only" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>View Last Restart</dt><dd><p>Scroll the shell window to the last Shell restart.</p>
+</dd>
+<dt>Restart Shell</dt><dd><p>Restart the shell to clean the environment and reset display and exception handling.</p>
+</dd>
+<dt>Previous History</dt><dd><p>Cycle through earlier commands in history which match the current entry.</p>
+</dd>
+<dt>Next History</dt><dd><p>Cycle through later commands in history which match the current entry.</p>
+</dd>
+<dt>Interrupt Execution</dt><dd><p>Stop a running program.</p>
+</dd>
+</dl>
+</section>
+<section id="debug-menu-shell-window-only">
+<h3>Debug menu (Shell window only)<a class="headerlink" href="#debug-menu-shell-window-only" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>Go to File/Line</dt><dd><p>Look on the current line. with the cursor, and the line above for a filename
+and line number.  If found, open the file if not already open, and show the
+line.  Use this to view source lines referenced in an exception traceback
+and lines found by Find in Files. Also available in the context menu of
+the Shell window and Output windows.</p>
+</dd>
+</dl>
+<dl class="simple" id="index-3">
+<dt>Debugger (toggle)</dt><dd><p>When activated, code entered in the Shell or run from an Editor will run
+under the debugger.  In the Editor, breakpoints can be set with the context
+menu.  This feature is still incomplete and somewhat experimental.</p>
+</dd>
+<dt>Stack Viewer</dt><dd><p>Show the stack traceback of the last exception in a tree widget, with
+access to locals and globals.</p>
+</dd>
+<dt>Auto-open Stack Viewer</dt><dd><p>Toggle automatically opening the stack viewer on an unhandled exception.</p>
+</dd>
+</dl>
+</section>
+<section id="options-menu-shell-and-editor">
+<h3>Options menu (Shell and Editor)<a class="headerlink" href="#options-menu-shell-and-editor" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>Configure IDLE</dt><dd><p>Open a configuration dialog and change preferences for the following:
+fonts, indentation, keybindings, text color themes, startup windows and
+size, additional help sources, and extensions.  On macOS, open the
+configuration dialog by selecting Preferences in the application
+menu. For more details, see
+<a class="reference internal" href="#preferences"><span class="std std-ref">Setting preferences</span></a> under Help and preferences.</p>
+</dd>
+</dl>
+<p>Most configuration options apply to all windows or all future windows.
+The option items below only apply to the active window.</p>
+<dl class="simple">
+<dt>Show/Hide Code Context (Editor Window only)</dt><dd><p>Open a pane at the top of the edit window which shows the block context
+of the code which has scrolled above the top of the window.  See
+<a class="reference internal" href="#code-context"><span class="std std-ref">Code Context</span></a> in the Editing and Navigation section
+below.</p>
+</dd>
+<dt>Show/Hide Line Numbers (Editor Window only)</dt><dd><p>Open a column to the left of the edit window which shows the number
+of each line of text.  The default is off, which may be changed in the
+preferences (see <a class="reference internal" href="#preferences"><span class="std std-ref">Setting preferences</span></a>).</p>
+</dd>
+<dt>Zoom/Restore Height</dt><dd><p>Toggles the window between normal size and maximum height. The initial size
+defaults to 40 lines by 80 chars unless changed on the General tab of the
+Configure IDLE dialog.  The maximum height for a screen is determined by
+momentarily maximizing a window the first time one is zoomed on the screen.
+Changing screen settings may invalidate the saved height.  This toggle has
+no effect when a window is maximized.</p>
+</dd>
+</dl>
+</section>
+<section id="window-menu-shell-and-editor">
+<h3>Window menu (Shell and Editor)<a class="headerlink" href="#window-menu-shell-and-editor" title="Link to this heading">¶</a></h3>
+<p>Lists the names of all open windows; select one to bring it to the foreground
+(deiconifying it if necessary).</p>
+</section>
+<section id="help-menu-shell-and-editor">
+<h3>Help menu (Shell and Editor)<a class="headerlink" href="#help-menu-shell-and-editor" title="Link to this heading">¶</a></h3>
+<dl class="simple">
+<dt>About IDLE</dt><dd><p>Display version, copyright, license, credits, and more.</p>
+</dd>
+<dt>IDLE Help</dt><dd><p>Display this IDLE document, detailing the menu options, basic editing and
+navigation, and other tips.</p>
+</dd>
+<dt>Python Docs</dt><dd><p>Access local Python documentation, if installed, or start a web browser
+and open docs.python.org showing the latest Python documentation.</p>
+</dd>
+<dt>Turtle Demo</dt><dd><p>Run the turtledemo module with example Python code and turtle drawings.</p>
+</dd>
+</dl>
+<p>Additional help sources may be added here with the Configure IDLE dialog under
+the General tab. See the <a class="reference internal" href="#help-sources"><span class="std std-ref">Help sources</span></a> subsection below
+for more on Help menu choices.</p>
+</section>
+<section id="context-menus">
+<span id="index-4"></span><h3>Context menus<a class="headerlink" href="#context-menus" title="Link to this heading">¶</a></h3>
+<p>Open a context menu by right-clicking in a window (Control-click on macOS).
+Context menus have the standard clipboard functions also on the Edit menu.</p>
+<dl class="simple">
+<dt>Cut</dt><dd><p>Copy selection into the system-wide clipboard; then delete the selection.</p>
+</dd>
+<dt>Copy</dt><dd><p>Copy selection into the system-wide clipboard.</p>
+</dd>
+<dt>Paste</dt><dd><p>Insert contents of the system-wide clipboard into the current window.</p>
+</dd>
+</dl>
+<p>Editor windows also have breakpoint functions.  Lines with a breakpoint set are
+specially marked.  Breakpoints only have an effect when running under the
+debugger.  Breakpoints for a file are saved in the user’s <code class="docutils literal notranslate"><span class="pre">.idlerc</span></code>
+directory.</p>
+<dl class="simple">
+<dt>Set Breakpoint</dt><dd><p>Set a breakpoint on the current line.</p>
+</dd>
+<dt>Clear Breakpoint</dt><dd><p>Clear the breakpoint on that line.</p>
+</dd>
+</dl>
+<p>Shell and Output windows also have the following.</p>
+<dl class="simple">
+<dt>Go to file/line</dt><dd><p>Same as in Debug menu.</p>
+</dd>
+</dl>
+<p>The Shell window also has an output squeezing facility explained in the <em>Python
+Shell window</em> subsection below.</p>
+<dl class="simple">
+<dt>Squeeze</dt><dd><p>If the cursor is over an output line, squeeze all the output between
+the code above and the prompt below down to a ‘Squeezed text’ label.</p>
+</dd>
+</dl>
+</section>
+</section>
+<section id="editing-and-navigation">
+<span id="id1"></span><h2>Editing and Navigation<a class="headerlink" href="#editing-and-navigation" title="Link to this heading">¶</a></h2>
+<section id="editor-windows">
+<h3>Editor windows<a class="headerlink" href="#editor-windows" title="Link to this heading">¶</a></h3>
+<p>IDLE may open editor windows when it starts, depending on settings
+and how you start IDLE.  Thereafter, use the File menu.  There can be only
+one open editor window for a given file.</p>
+<p>The title bar contains the name of the file, the full path, and the version
+of Python and IDLE running the window.  The status bar contains the line
+number (‘Ln’) and column number (‘Col’).  Line numbers start with 1;
+column numbers with 0.</p>
+<p>IDLE assumes that files with a known .py* extension contain Python code
+and that other files do not.  Run Python code with the Run menu.</p>
+</section>
+<section id="key-bindings">
+<h3>Key bindings<a class="headerlink" href="#key-bindings" title="Link to this heading">¶</a></h3>
+<p>The IDLE insertion cursor is a thin vertical bar between character
+positions.  When characters are entered, the insertion cursor and
+everything to its right moves right one character and
+the new character is entered in the new space.</p>
+<p>Several non-character keys move the cursor and possibly
+delete characters.  Deletion does not puts text on the clipboard,
+but IDLE has an undo list.  Wherever this doc discusses keys,
+‘C’ refers to the <kbd class="kbd docutils literal notranslate">Control</kbd> key on Windows and
+Unix and the <kbd class="kbd docutils literal notranslate">Command</kbd> key on macOS.  (And all such discussions
+assume that the keys have not been re-bound to something else.)</p>
+<ul class="simple">
+<li><p>Arrow keys move the cursor one character or line.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">LeftArrow</kbd> and <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">RightArrow</kbd> moves left or right one word.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">Home</kbd> and <kbd class="kbd docutils literal notranslate">End</kbd> go to the beginning or end of the line.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">Page Up</kbd> and <kbd class="kbd docutils literal notranslate">Page Down</kbd> go up or down one screen.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">Home</kbd> and <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">End</kbd> go to beginning or end of the file.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">Backspace</kbd> and <kbd class="kbd docutils literal notranslate">Del</kbd> (or <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">d</kbd>) delete the previous
+or next character.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">Backspace</kbd> and <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">Del</kbd> delete one word left or right.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">k</kbd> deletes (‘kills’) everything to the right.</p></li>
+</ul>
+<p>Standard keybindings (like <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">c</kbd> to copy and <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">v</kbd> to paste)
+may work.  Keybindings are selected in the Configure IDLE dialog.</p>
+</section>
+<section id="automatic-indentation">
+<h3>Automatic indentation<a class="headerlink" href="#automatic-indentation" title="Link to this heading">¶</a></h3>
+<p>After a block-opening statement, the next line is indented by 4 spaces (in the
+Python Shell window by one tab).  After certain keywords (break, return etc.)
+the next line is dedented.  In leading indentation, <kbd class="kbd docutils literal notranslate">Backspace</kbd> deletes up
+to 4 spaces if they are there. <kbd class="kbd docutils literal notranslate">Tab</kbd> inserts spaces (in the Python
+Shell window one tab), number depends on Indent width. Currently, tabs
+are restricted to four spaces due to Tcl/Tk limitations.</p>
+<p>See also the indent/dedent region commands on the
+<a class="reference internal" href="#format-menu"><span class="std std-ref">Format menu</span></a>.</p>
+</section>
+<section id="search-and-replace">
+<h3>Search and Replace<a class="headerlink" href="#search-and-replace" title="Link to this heading">¶</a></h3>
+<p>Any selection becomes a search target.  However, only selections within
+a line work because searches are only performed within lines with the
+terminal newline removed.  If <code class="docutils literal notranslate"><span class="pre">[x]</span> <span class="pre">Regular</span> <span class="pre">expression</span></code> is checked, the
+target is interpreted according to the Python re module.</p>
+</section>
+<section id="completions">
+<span id="id2"></span><h3>Completions<a class="headerlink" href="#completions" title="Link to this heading">¶</a></h3>
+<p>Completions are supplied, when requested and available, for module
+names, attributes of classes or functions, or filenames.  Each request
+method displays a completion box with existing names.  (See tab
+completions below for an exception.) For any box, change the name
+being completed and the item highlighted in the box by
+typing and deleting characters; by hitting <kbd class="kbd docutils literal notranslate">Up</kbd>, <kbd class="kbd docutils literal notranslate">Down</kbd>,
+<kbd class="kbd docutils literal notranslate">PageUp</kbd>, <kbd class="kbd docutils literal notranslate">PageDown</kbd>, <kbd class="kbd docutils literal notranslate">Home</kbd>, and <kbd class="kbd docutils literal notranslate">End</kbd> keys;
+and by a single click within the box.  Close the box with <kbd class="kbd docutils literal notranslate">Escape</kbd>,
+<kbd class="kbd docutils literal notranslate">Enter</kbd>, and double <kbd class="kbd docutils literal notranslate">Tab</kbd> keys or clicks outside the box.
+A double click within the box selects and closes.</p>
+<p>One way to open a box is to type a key character and wait for a
+predefined interval.  This defaults to 2 seconds; customize it
+in the settings dialog.  (To prevent auto popups, set the delay to a
+large number of milliseconds, such as 100000000.) For imported module
+names or class or function attributes, type ‘.’.
+For filenames in the root directory, type <a class="reference internal" href="os.html#os.sep" title="os.sep"><code class="xref py py-data docutils literal notranslate"><span class="pre">os.sep</span></code></a> or
+<a class="reference internal" href="os.html#os.altsep" title="os.altsep"><code class="xref py py-data docutils literal notranslate"><span class="pre">os.altsep</span></code></a> immediately after an opening quote.  (On Windows,
+one can specify a drive first.)  Move into subdirectories by typing a
+directory name and a separator.</p>
+<p>Instead of waiting, or after a box is closed, open a completion box
+immediately with Show Completions on the Edit menu.  The default hot
+key is <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">space</kbd>.  If one types a prefix for the desired name
+before opening the box, the first match or near miss is made visible.
+The result is the same as if one enters a prefix
+after the box is displayed.  Show Completions after a quote completes
+filenames in the current directory instead of a root directory.</p>
+<p>Hitting <kbd class="kbd docutils literal notranslate">Tab</kbd> after a prefix usually has the same effect as Show
+Completions.  (With no prefix, it indents.)  However, if there is only
+one match to the prefix, that match is immediately added to the editor
+text without opening a box.</p>
+<p>Invoking ‘Show Completions’, or hitting <kbd class="kbd docutils literal notranslate">Tab</kbd> after a prefix,
+outside of a string and without a preceding ‘.’ opens a box with
+keywords, builtin names, and available module-level names.</p>
+<p>When editing code in an editor (as oppose to Shell), increase the
+available module-level names by running your code
+and not restarting the Shell thereafter.  This is especially useful
+after adding imports at the top of a file.  This also increases
+possible attribute completions.</p>
+<p>Completion boxes initially exclude names beginning with ‘_’ or, for
+modules, not included in ‘__all__’.  The hidden names can be accessed
+by typing ‘_’ after ‘.’, either before or after the box is opened.</p>
+</section>
+<section id="calltips">
+<span id="id3"></span><h3>Calltips<a class="headerlink" href="#calltips" title="Link to this heading">¶</a></h3>
+<p>A calltip is shown automatically when one types <kbd class="kbd docutils literal notranslate">(</kbd> after the name
+of an <em>accessible</em> function.  A function name expression may include
+dots and subscripts.  A calltip remains until it is clicked, the cursor
+is moved out of the argument area, or <kbd class="kbd docutils literal notranslate">)</kbd> is typed.  Whenever the
+cursor is in the argument part of a definition, select Edit and “Show
+Call Tip” on the menu or enter its shortcut to display a calltip.</p>
+<p>The calltip consists of the function’s signature and docstring up to
+the latter’s first blank line or the fifth non-blank line.  (Some builtin
+functions lack an accessible signature.)  A ‘/’ or ‘*’ in the signature
+indicates that the preceding or following arguments are passed by
+position or name (keyword) only.  Details are subject to change.</p>
+<p>In Shell, the accessible functions depends on what modules have been
+imported into the user process, including those imported by Idle itself,
+and which definitions have been run, all since the last restart.</p>
+<p>For example, restart the Shell and enter <code class="docutils literal notranslate"><span class="pre">itertools.count(</span></code>.  A calltip
+appears because Idle imports itertools into the user process for its own
+use.  (This could change.)  Enter <code class="docutils literal notranslate"><span class="pre">turtle.write(</span></code> and nothing appears.
+Idle does not itself import turtle.  The menu entry and shortcut also do
+nothing.  Enter <code class="docutils literal notranslate"><span class="pre">import</span> <span class="pre">turtle</span></code>.  Thereafter, <code class="docutils literal notranslate"><span class="pre">turtle.write(</span></code>
+will display a calltip.</p>
+<p>In an editor, import statements have no effect until one runs the file.
+One might want to run a file after writing import statements, after
+adding function definitions, or after opening an existing file.</p>
+</section>
+<section id="format-block">
+<span id="id4"></span><h3>Format block<a class="headerlink" href="#format-block" title="Link to this heading">¶</a></h3>
+<p>Reformat Paragraph rewraps a block (‘paragraph’) of contiguous equally
+indented non-blank comments, a similar block of text within a multiline
+string, or a selected subset of either.
+If needed, add a blank line to separate string from code.
+Partial lines in a selection expand to complete lines.
+The resulting lines have the same indent as before
+but have maximum total length of N columns (characters).
+Change the default N of 72 on the Window tab of IDLE Settings.</p>
+</section>
+<section id="code-context">
+<span id="id5"></span><h3>Code Context<a class="headerlink" href="#code-context" title="Link to this heading">¶</a></h3>
+<p>Within an editor window containing Python code, code context can be toggled
+in order to show or hide a pane at the top of the window.  When shown, this
+pane freezes the opening lines for block code, such as those beginning with
+<code class="docutils literal notranslate"><span class="pre">class</span></code>, <code class="docutils literal notranslate"><span class="pre">def</span></code>, or <code class="docutils literal notranslate"><span class="pre">if</span></code> keywords, that would have otherwise scrolled
+out of view.  The size of the pane will be expanded and contracted as needed
+to show the all current levels of context, up to the maximum number of
+lines defined in the Configure IDLE dialog (which defaults to 15).  If there
+are no current context lines and the feature is toggled on, a single blank
+line will display.  Clicking on a line in the context pane will move that
+line to the top of the editor.</p>
+<p>The text and background colors for the context pane can be configured under
+the Highlights tab in the Configure IDLE dialog.</p>
+</section>
+<section id="shell-window">
+<h3>Shell window<a class="headerlink" href="#shell-window" title="Link to this heading">¶</a></h3>
+<p>In IDLE’s Shell, enter, edit, and recall complete statements. (Most
+consoles and terminals only work with a single physical line at a time).</p>
+<p>Submit a single-line statement for execution by hitting <kbd class="kbd docutils literal notranslate">Return</kbd>
+with the cursor anywhere on the line.  If a line is extended with
+Backslash (<kbd class="kbd docutils literal notranslate">\</kbd>), the cursor must be on the last physical line.
+Submit a multi-line compound statement by entering a blank line after
+the statement.</p>
+<p>When one pastes code into Shell, it is not compiled and possibly executed
+until one hits <kbd class="kbd docutils literal notranslate">Return</kbd>, as specified above.
+One may edit pasted code first.
+If one pastes more than one statement into Shell, the result will be a
+<a class="reference internal" href="exceptions.html#SyntaxError" title="SyntaxError"><code class="xref py py-exc docutils literal notranslate"><span class="pre">SyntaxError</span></code></a> when multiple statements are compiled as if they were one.</p>
+<p>Lines containing <code class="docutils literal notranslate"><span class="pre">RESTART</span></code> mean that the user execution process has been
+re-started.  This occurs when the user execution process has crashed,
+when one requests a restart on the Shell menu, or when one runs code
+in an editor window.</p>
+<p>The editing features described in previous subsections work when entering
+code interactively.  IDLE’s Shell window also responds to the following:</p>
+<ul class="simple">
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">c</kbd> attempts to interrupt statement execution (but may fail).</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">d</kbd> closes Shell if typed at a <code class="docutils literal notranslate"><span class="pre">&gt;&gt;&gt;</span></code> prompt.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">Alt</kbd>-<kbd class="kbd docutils literal notranslate">p</kbd> and <kbd class="kbd docutils literal notranslate">Alt</kbd>-<kbd class="kbd docutils literal notranslate">n</kbd> (<kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">p</kbd> and <kbd class="kbd docutils literal notranslate">C</kbd>-<kbd class="kbd docutils literal notranslate">n</kbd> on macOS)
+retrieve to the current prompt the previous or next previously
+entered statement that matches anything already typed.</p></li>
+<li><p><kbd class="kbd docutils literal notranslate">Return</kbd> while the cursor is on any previous statement
+appends the latter to anything already typed at the prompt.</p></li>
+</ul>
+</section>
+<section id="text-colors">
+<h3>Text colors<a class="headerlink" href="#text-colors" title="Link to this heading">¶</a></h3>
+<p>Idle defaults to black on white text, but colors text with special meanings.
+For the shell, these are shell output, shell error, user output, and
+user error.  For Python code, at the shell prompt or in an editor, these are
+keywords, builtin class and function names, names following <code class="docutils literal notranslate"><span class="pre">class</span></code> and
+<code class="docutils literal notranslate"><span class="pre">def</span></code>, strings, and comments. For any text window, these are the cursor (when
+present), found text (when possible), and selected text.</p>
+<p>IDLE also highlights the <a class="reference internal" href="../reference/lexical_analysis.html#soft-keywords"><span class="std std-ref">soft keywords</span></a> <a class="reference internal" href="../reference/compound_stmts.html#match"><code class="xref std std-keyword docutils literal notranslate"><span class="pre">match</span></code></a>,
+<a class="reference internal" href="../reference/compound_stmts.html#match"><code class="xref std std-keyword docutils literal notranslate"><span class="pre">case</span></code></a>, and <a class="reference internal" href="../reference/compound_stmts.html#wildcard-patterns"><code class="xref std std-keyword docutils literal notranslate"><span class="pre">_</span></code></a> in
+pattern-matching statements. However, this highlighting is not perfect and
+will be incorrect in some rare cases, including some <code class="docutils literal notranslate"><span class="pre">_</span></code>-s in <code class="docutils literal notranslate"><span class="pre">case</span></code>
+patterns.</p>
+<p>Text coloring is done in the background, so uncolorized text is occasionally
+visible.  To change the color scheme, use the Configure IDLE dialog
+Highlighting tab.  The marking of debugger breakpoint lines in the editor and
+text in popups and dialogs is not user-configurable.</p>
+</section>
+</section>
+<section id="startup-and-code-execution">
+<h2>Startup and Code Execution<a class="headerlink" href="#startup-and-code-execution" title="Link to this heading">¶</a></h2>
+<p>Upon startup with the <code class="docutils literal notranslate"><span class="pre">-s</span></code> option, IDLE will execute the file referenced by
+the environment variables <span class="target" id="index-5"></span><code class="xref std std-envvar docutils literal notranslate"><span class="pre">IDLESTARTUP</span></code> or <span class="target" id="index-6"></span><a class="reference internal" href="../using/cmdline.html#envvar-PYTHONSTARTUP"><code class="xref std std-envvar docutils literal notranslate"><span class="pre">PYTHONSTARTUP</span></code></a>.
+IDLE first checks for <code class="docutils literal notranslate"><span class="pre">IDLESTARTUP</span></code>; if <code class="docutils literal notranslate"><span class="pre">IDLESTARTUP</span></code> is present the file
+referenced is run.  If <code class="docutils literal notranslate"><span class="pre">IDLESTARTUP</span></code> is not present, IDLE checks for
+<code class="docutils literal notranslate"><span class="pre">PYTHONSTARTUP</span></code>.  Files referenced by these environment variables are
+convenient places to store functions that are used frequently from the IDLE
+shell, or for executing import statements to import common modules.</p>
+<p>In addition, <code class="docutils literal notranslate"><span class="pre">Tk</span></code> also loads a startup file if it is present.  Note that the
+Tk file is loaded unconditionally.  This additional file is <code class="docutils literal notranslate"><span class="pre">.Idle.py</span></code> and is
+looked for in the user’s home directory.  Statements in this file will be
+executed in the Tk namespace, so this file is not useful for importing
+functions to be used from IDLE’s Python shell.</p>
+<section id="command-line-usage">
+<span id="idlelib-cli"></span><h3>Command-line usage<a class="headerlink" href="#command-line-usage" title="Link to this heading">¶</a></h3>
+<p>IDLE can be invoked from the command line with various options. The general syntax is:</p>
+<div class="highlight-bash notranslate"><div class="highlight"><pre><span></span>python<span class="w"> </span>-m<span class="w"> </span>idlelib<span class="w"> </span><span class="o">[</span>options<span class="o">]</span><span class="w"> </span><span class="o">[</span>file<span class="w"> </span>...<span class="o">]</span>
+</pre></div>
+</div>
+<p>The following options are available:</p>
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-c">
+<span class="sig-name descname"><span class="pre">-c</span></span><span class="sig-prename descclassname"> <span class="pre">&lt;command&gt;</span></span><a class="headerlink" href="#cmdoption-idle-c" title="Link to this definition">¶</a></dt>
+<dd><p>Run the specified Python command in the shell window.
+For example, pass <code class="docutils literal notranslate"><span class="pre">-c</span> <span class="pre">&quot;print('Hello,</span> <span class="pre">World!')&quot;</span></code>.
+On Windows, the outer quotes must be double quotes as shown.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-d">
+<span class="sig-name descname"><span class="pre">-d</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-d" title="Link to this definition">¶</a></dt>
+<dd><p>Enable the debugger and open the shell window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-e">
+<span class="sig-name descname"><span class="pre">-e</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-e" title="Link to this definition">¶</a></dt>
+<dd><p>Open an editor window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-h">
+<span class="sig-name descname"><span class="pre">-h</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-h" title="Link to this definition">¶</a></dt>
+<dd><p>Print a help message with legal combinations of options and exit.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-i">
+<span class="sig-name descname"><span class="pre">-i</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-i" title="Link to this definition">¶</a></dt>
+<dd><p>Open a shell window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-r">
+<span class="sig-name descname"><span class="pre">-r</span></span><span class="sig-prename descclassname"> <span class="pre">&lt;file&gt;</span></span><a class="headerlink" href="#cmdoption-idle-r" title="Link to this definition">¶</a></dt>
+<dd><p>Run the specified file in the shell window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-s">
+<span class="sig-name descname"><span class="pre">-s</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-s" title="Link to this definition">¶</a></dt>
+<dd><p>Run the startup file (as defined by the environment variables <span class="target" id="index-7"></span><code class="xref std std-envvar docutils literal notranslate"><span class="pre">IDLESTARTUP</span></code> or <span class="target" id="index-8"></span><a class="reference internal" href="../using/cmdline.html#envvar-PYTHONSTARTUP"><code class="xref std std-envvar docutils literal notranslate"><span class="pre">PYTHONSTARTUP</span></code></a>) before opening the shell window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-t">
+<span class="sig-name descname"><span class="pre">-t</span></span><span class="sig-prename descclassname"> <span class="pre">&lt;title&gt;</span></span><a class="headerlink" href="#cmdoption-idle-t" title="Link to this definition">¶</a></dt>
+<dd><p>Set the title of the shell window.</p>
+</dd></dl>
+
+<dl class="std option">
+<dt class="sig sig-object std" id="cmdoption-idle-0">
+<span class="sig-name descname"><span class="pre">-</span></span><span class="sig-prename descclassname"></span><a class="headerlink" href="#cmdoption-idle-0" title="Link to this definition">¶</a></dt>
+<dd><p>Read and execute standard input in the shell window. This option must be the last one before any arguments.</p>
+</dd></dl>
+
+<p>If arguments are provided:</p>
+<ul class="simple">
+<li><p>If <code class="docutils literal notranslate"><span class="pre">-</span></code>, <code class="docutils literal notranslate"><span class="pre">-c</span></code>, or <code class="docutils literal notranslate"><span class="pre">-r</span></code> is used, all arguments are placed in <code class="docutils literal notranslate"><span class="pre">sys.argv[1:]</span></code>,
+and <code class="docutils literal notranslate"><span class="pre">sys.argv[0]</span></code> is set to <code class="docutils literal notranslate"><span class="pre">''</span></code>, <code class="docutils literal notranslate"><span class="pre">'-c'</span></code>, or <code class="docutils literal notranslate"><span class="pre">'-r'</span></code> respectively.
+No editor window is opened, even if that is the default set in the <em>Options</em> dialog.</p></li>
+<li><p>Otherwise, arguments are treated as files to be opened for editing, and <code class="docutils literal notranslate"><span class="pre">sys.argv</span></code> reflects the arguments passed to IDLE itself.</p></li>
+</ul>
+</section>
+<section id="startup-failure">
+<h3>Startup failure<a class="headerlink" href="#startup-failure" title="Link to this heading">¶</a></h3>
+<p>IDLE uses a socket to communicate between the IDLE GUI process and the user
+code execution process.  A connection must be established whenever the Shell
+starts or restarts.  (The latter is indicated by a divider line that says
+‘RESTART’). If the user process fails to connect to the GUI process, it
+usually displays a <code class="docutils literal notranslate"><span class="pre">Tk</span></code> error box with a ‘cannot connect’ message
+that directs the user here.  It then exits.</p>
+<p>One specific connection failure on Unix systems results from
+misconfigured masquerading rules somewhere in a system’s network setup.
+When IDLE is started from a terminal, one will see a message starting
+with <code class="docutils literal notranslate"><span class="pre">**</span> <span class="pre">Invalid</span> <span class="pre">host:</span></code>.
+The valid value is <code class="docutils literal notranslate"><span class="pre">127.0.0.1</span> <span class="pre">(idlelib.rpc.LOCALHOST)</span></code>.
+One can diagnose with <code class="docutils literal notranslate"><span class="pre">tcpconnect</span> <span class="pre">-irv</span> <span class="pre">127.0.0.1</span> <span class="pre">6543</span></code> in one
+terminal window and <code class="docutils literal notranslate"><span class="pre">tcplisten</span> <span class="pre">&lt;same</span> <span class="pre">args&gt;</span></code> in another.</p>
+<p>A common cause of failure is a user-written file with the same name as a
+standard library module, such as <em>random.py</em> and <em>tkinter.py</em>. When such a
+file is located in the same directory as a file that is about to be run,
+IDLE cannot import the stdlib file.  The current fix is to rename the
+user file.</p>
+<p>Though less common than in the past, an antivirus or firewall program may
+stop the connection.  If the program cannot be taught to allow the
+connection, then it must be turned off for IDLE to work.  It is safe to
+allow this internal connection because no data is visible on external
+ports.  A similar problem is a network mis-configuration that blocks
+connections.</p>
+<p>Python installation issues occasionally stop IDLE: multiple versions can
+clash, or a single installation might need admin access.  If one undo the
+clash, or cannot or does not want to run as admin, it might be easiest to
+completely remove Python and start over.</p>
+<p>A zombie pythonw.exe process could be a problem.  On Windows, use Task
+Manager to check for one and stop it if there is.  Sometimes a restart
+initiated by a program crash or Keyboard Interrupt (control-C) may fail
+to connect.  Dismissing the error box or using Restart Shell on the Shell
+menu may fix a temporary problem.</p>
+<p>When IDLE first starts, it attempts to read user configuration files in
+<code class="docutils literal notranslate"><span class="pre">~/.idlerc/</span></code> (~ is one’s home directory).  If there is a problem, an error
+message should be displayed.  Leaving aside random disk glitches, this can
+be prevented by never editing the files by hand.  Instead, use the
+configuration dialog, under Options.  Once there is an error in a user
+configuration file, the best solution may be to delete it and start over
+with the settings dialog.</p>
+<p>If IDLE quits with no message, and it was not started from a console, try
+starting it from a console or terminal (<code class="docutils literal notranslate"><span class="pre">python</span> <span class="pre">-m</span> <span class="pre">idlelib</span></code>) and see if
+this results in an error message.</p>
+<p>On Unix-based systems with tcl/tk older than <code class="docutils literal notranslate"><span class="pre">8.6.11</span></code> (see
+<code class="docutils literal notranslate"><span class="pre">About</span> <span class="pre">IDLE</span></code>) certain characters of certain fonts can cause
+a tk failure with a message to the terminal.  This can happen either
+if one starts IDLE to edit a file with such a character or later
+when entering such a character.  If one cannot upgrade tcl/tk,
+then re-configure IDLE to use a font that works better.</p>
+</section>
+<section id="running-user-code">
+<h3>Running user code<a class="headerlink" href="#running-user-code" title="Link to this heading">¶</a></h3>
+<p>With rare exceptions, the result of executing Python code with IDLE is
+intended to be the same as executing the same code by the default method,
+directly with Python in a text-mode system console or terminal window.
+However, the different interface and operation occasionally affect
+visible results.  For instance, <code class="docutils literal notranslate"><span class="pre">sys.modules</span></code> starts with more entries,
+and <code class="docutils literal notranslate"><span class="pre">threading.active_count()</span></code> returns 2 instead of 1.</p>
+<p>By default, IDLE runs user code in a separate OS process rather than in
+the user interface process that runs the shell and editor.  In the execution
+process, it replaces <code class="docutils literal notranslate"><span class="pre">sys.stdin</span></code>, <code class="docutils literal notranslate"><span class="pre">sys.stdout</span></code>, and <code class="docutils literal notranslate"><span class="pre">sys.stderr</span></code>
+with objects that get input from and send output to the Shell window.
+The original values stored in <code class="docutils literal notranslate"><span class="pre">sys.__stdin__</span></code>, <code class="docutils literal notranslate"><span class="pre">sys.__stdout__</span></code>, and
+<code class="docutils literal notranslate"><span class="pre">sys.__stderr__</span></code> are not touched, but may be <code class="docutils literal notranslate"><span class="pre">None</span></code>.</p>
+<p>Sending print output from one process to a text widget in another is
+slower than printing to a system terminal in the same process.
+This has the most effect when printing multiple arguments, as the string
+for each argument, each separator, the newline are sent separately.
+For development, this is usually not a problem, but if one wants to
+print faster in IDLE, format and join together everything one wants
+displayed together and then print a single string.  Both format strings
+and <a class="reference internal" href="stdtypes.html#str.join" title="str.join"><code class="xref py py-meth docutils literal notranslate"><span class="pre">str.join()</span></code></a> can help combine fields and lines.</p>
+<p>IDLE’s standard stream replacements are not inherited by subprocesses
+created in the execution process, whether directly by user code or by
+modules such as multiprocessing.  If such subprocess use <code class="docutils literal notranslate"><span class="pre">input</span></code> from
+sys.stdin or <code class="docutils literal notranslate"><span class="pre">print</span></code> or <code class="docutils literal notranslate"><span class="pre">write</span></code> to sys.stdout or sys.stderr,
+IDLE should be started in a command line window.  (On Windows,
+use <code class="docutils literal notranslate"><span class="pre">python</span></code> or <code class="docutils literal notranslate"><span class="pre">py</span></code> rather than <code class="docutils literal notranslate"><span class="pre">pythonw</span></code> or <code class="docutils literal notranslate"><span class="pre">pyw</span></code>.)
+The secondary subprocess
+will then be attached to that window for input and output.</p>
+<p>If <code class="docutils literal notranslate"><span class="pre">sys</span></code> is reset by user code, such as with <code class="docutils literal notranslate"><span class="pre">importlib.reload(sys)</span></code>,
+IDLE’s changes are lost and input from the keyboard and output to the screen
+will not work correctly.</p>
+<p>When Shell has the focus, it controls the keyboard and screen.  This is
+normally transparent, but functions that directly access the keyboard
+and screen will not work.  These include system-specific functions that
+determine whether a key has been pressed and if so, which.</p>
+<p>The IDLE code running in the execution process adds frames to the call stack
+that would not be there otherwise.  IDLE wraps <code class="docutils literal notranslate"><span class="pre">sys.getrecursionlimit</span></code> and
+<code class="docutils literal notranslate"><span class="pre">sys.setrecursionlimit</span></code> to reduce the effect of the additional stack
+frames.</p>
+<p>When user code raises SystemExit either directly or by calling sys.exit,
+IDLE returns to a Shell prompt instead of exiting.</p>
+</section>
+<section id="user-output-in-shell">
+<h3>User output in Shell<a class="headerlink" href="#user-output-in-shell" title="Link to this heading">¶</a></h3>
+<p>When a program outputs text, the result is determined by the
+corresponding output device.  When IDLE executes user code, <code class="docutils literal notranslate"><span class="pre">sys.stdout</span></code>
+and <code class="docutils literal notranslate"><span class="pre">sys.stderr</span></code> are connected to the display area of IDLE’s Shell.  Some of
+its features are inherited from the underlying Tk Text widget.  Others
+are programmed additions.  Where it matters, Shell is designed for development
+rather than production runs.</p>
+<p>For instance, Shell never throws away output.  A program that sends unlimited
+output to Shell will eventually fill memory, resulting in a memory error.
+In contrast, some system text windows only keep the last n lines of output.
+A Windows console, for instance, keeps a user-settable 1 to 9999 lines,
+with 300 the default.</p>
+<p>A Tk Text widget, and hence IDLE’s Shell, displays characters (codepoints) in
+the BMP (Basic Multilingual Plane) subset of Unicode.  Which characters are
+displayed with a proper glyph and which with a replacement box depends on the
+operating system and installed fonts.  Tab characters cause the following text
+to begin after the next tab stop. (They occur every 8 ‘characters’).  Newline
+characters cause following text to appear on a new line.  Other control
+characters are ignored or displayed as a space, box, or something else,
+depending on the operating system and font.  (Moving the text cursor through
+such output with arrow keys may exhibit some surprising spacing behavior.)</p>
+<div class="highlight-python3 notranslate"><div class="highlight"><pre><span></span><span class="gp">&gt;&gt;&gt; </span><span class="n">s</span> <span class="o">=</span> <span class="s1">&#39;a</span><span class="se">\t</span><span class="s1">b</span><span class="se">\a</span><span class="s1">&lt;</span><span class="se">\x02</span><span class="s1">&gt;&lt;</span><span class="se">\r</span><span class="s1">&gt;</span><span class="se">\b</span><span class="s1">c</span><span class="se">\n</span><span class="s1">d&#39;</span>  <span class="c1"># Enter 22 chars.</span>
+<span class="gp">&gt;&gt;&gt; </span><span class="nb">len</span><span class="p">(</span><span class="n">s</span><span class="p">)</span>
+<span class="go">14</span>
+<span class="gp">&gt;&gt;&gt; </span><span class="n">s</span>  <span class="c1"># Display repr(s)</span>
+<span class="go">&#39;a\tb\x07&lt;\x02&gt;&lt;\r&gt;\x08c\nd&#39;</span>
+<span class="gp">&gt;&gt;&gt; </span><span class="nb">print</span><span class="p">(</span><span class="n">s</span><span class="p">,</span> <span class="n">end</span><span class="o">=</span><span class="s1">&#39;&#39;</span><span class="p">)</span>  <span class="c1"># Display s as is.</span>
+<span class="go"># Result varies by OS and font.  Try it.</span>
+</pre></div>
+</div>
+<p>The <code class="docutils literal notranslate"><span class="pre">repr</span></code> function is used for interactive echo of expression
+values.  It returns an altered version of the input string in which
+control codes, some BMP codepoints, and all non-BMP codepoints are
+replaced with escape codes. As demonstrated above, it allows one to
+identify the characters in a string, regardless of how they are displayed.</p>
+<p>Normal and error output are generally kept separate (on separate lines)
+from code input and each other.  They each get different highlight colors.</p>
+<p>For SyntaxError tracebacks, the normal ‘^’ marking where the error was
+detected is replaced by coloring the text with an error highlight.
+When code run from a file causes other exceptions, one may right click
+on a traceback line to jump to the corresponding line in an IDLE editor.
+The file will be opened if necessary.</p>
+<p>Shell has a special facility for squeezing output lines down to a
+‘Squeezed text’ label.  This is done automatically
+for output over N lines (N = 50 by default).
+N can be changed in the PyShell section of the General
+page of the Settings dialog.  Output with fewer lines can be squeezed by
+right clicking on the output.  This can be useful lines long enough to slow
+down scrolling.</p>
+<p>Squeezed output is expanded in place by double-clicking the label.
+It can also be sent to the clipboard or a separate view window by
+right-clicking the label.</p>
+</section>
+<section id="developing-tkinter-applications">
+<h3>Developing tkinter applications<a class="headerlink" href="#developing-tkinter-applications" title="Link to this heading">¶</a></h3>
+<p>IDLE is intentionally different from standard Python in order to
+facilitate development of tkinter programs.  Enter <code class="docutils literal notranslate"><span class="pre">import</span> <span class="pre">tkinter</span> <span class="pre">as</span> <span class="pre">tk;</span>
+<span class="pre">root</span> <span class="pre">=</span> <span class="pre">tk.Tk()</span></code> in standard Python and nothing appears.  Enter the same
+in IDLE and a tk window appears.  In standard Python, one must also enter
+<code class="docutils literal notranslate"><span class="pre">root.update()</span></code> to see the window.  IDLE does the equivalent in the
+background, about 20 times a second, which is about every 50 milliseconds.
+Next enter <code class="docutils literal notranslate"><span class="pre">b</span> <span class="pre">=</span> <span class="pre">tk.Button(root,</span> <span class="pre">text='button');</span> <span class="pre">b.pack()</span></code>.  Again,
+nothing visibly changes in standard Python until one enters <code class="docutils literal notranslate"><span class="pre">root.update()</span></code>.</p>
+<p>Most tkinter programs run <code class="docutils literal notranslate"><span class="pre">root.mainloop()</span></code>, which usually does not
+return until the tk app is destroyed.  If the program is run with
+<code class="docutils literal notranslate"><span class="pre">python</span> <span class="pre">-i</span></code> or from an IDLE editor, a <code class="docutils literal notranslate"><span class="pre">&gt;&gt;&gt;</span></code> shell prompt does not
+appear until <code class="docutils literal notranslate"><span class="pre">mainloop()</span></code> returns, at which time there is nothing left
+to interact with.</p>
+<p>When running a tkinter program from an IDLE editor, one can comment out
+the mainloop call.  One then gets a shell prompt immediately and can
+interact with the live application.  One just has to remember to
+re-enable the mainloop call when running in standard Python.</p>
+</section>
+<section id="running-without-a-subprocess">
+<h3>Running without a subprocess<a class="headerlink" href="#running-without-a-subprocess" title="Link to this heading">¶</a></h3>
+<p>By default, IDLE executes user code in a separate subprocess via a socket,
+which uses the internal loopback interface.  This connection is not
+externally visible and no data is sent to or received from the internet.
+If firewall software complains anyway, you can ignore it.</p>
+<p>If the attempt to make the socket connection fails, Idle will notify you.
+Such failures are sometimes transient, but if persistent, the problem
+may be either a firewall blocking the connection or misconfiguration of
+a particular system.  Until the problem is fixed, one can run Idle with
+the -n command line switch.</p>
+<p>If IDLE is started with the -n command line switch it will run in a
+single process and will not create the subprocess which runs the RPC
+Python execution server.  This can be useful if Python cannot create
+the subprocess or the RPC socket interface on your platform.  However,
+in this mode user code is not isolated from IDLE itself.  Also, the
+environment is not restarted when Run/Run Module (F5) is selected.  If
+your code has been modified, you must reload() the affected modules and
+re-import any specific items (e.g. from foo import baz) if the changes
+are to take effect.  For these reasons, it is preferable to run IDLE
+with the default subprocess if at all possible.</p>
+<div class="deprecated">
+<p><span class="versionmodified deprecated">Deprecated since version 3.4.</span></p>
+</div>
+</section>
+</section>
+<section id="help-and-preferences">
+<h2>Help and Preferences<a class="headerlink" href="#help-and-preferences" title="Link to this heading">¶</a></h2>
+<section id="help-sources">
+<span id="id6"></span><h3>Help sources<a class="headerlink" href="#help-sources" title="Link to this heading">¶</a></h3>
+<p>Help menu entry “IDLE Help” displays a formatted html version of the
+IDLE chapter of the Library Reference.  The result, in a read-only
+tkinter text window, is close to what one sees in a web browser.
+Navigate through the text with a mousewheel,
+the scrollbar, or up and down arrow keys held down.
+Or click the TOC (Table of Contents) button and select a section
+header in the opened box.</p>
+<p>Help menu entry “Python Docs” opens the extensive sources of help,
+including tutorials, available at <code class="docutils literal notranslate"><span class="pre">docs.python.org/x.y</span></code>, where ‘x.y’
+is the currently running Python version.  If your system
+has an off-line copy of the docs (this may be an installation option),
+that will be opened instead.</p>
+<p>Selected URLs can be added or removed from the help menu at any time using the
+General tab of the Configure IDLE dialog.</p>
+</section>
+<section id="setting-preferences">
+<span id="preferences"></span><h3>Setting preferences<a class="headerlink" href="#setting-preferences" title="Link to this heading">¶</a></h3>
+<p>The font preferences, highlighting, keys, and general preferences can be
+changed via Configure IDLE on the Option menu.
+Non-default user settings are saved in a <code class="docutils literal notranslate"><span class="pre">.idlerc</span></code> directory in the user’s
+home directory.  Problems caused by bad user configuration files are solved
+by editing or deleting one or more of the files in <code class="docutils literal notranslate"><span class="pre">.idlerc</span></code>.</p>
+<p>On the Font tab, see the text sample for the effect of font face and size
+on multiple characters in multiple languages.  Edit the sample to add
+other characters of personal interest.  Use the sample to select
+monospaced fonts.  If particular characters have problems in Shell or an
+editor, add them to the top of the sample and try changing first size
+and then font.</p>
+<p>On the Highlights and Keys tab, select a built-in or custom color theme
+and key set.  To use a newer built-in color theme or key set with older
+IDLEs, save it as a new custom theme or key set and it well be accessible
+to older IDLEs.</p>
+</section>
+<section id="idle-on-macos">
+<h3>IDLE on macOS<a class="headerlink" href="#idle-on-macos" title="Link to this heading">¶</a></h3>
+<p>Under System Preferences: Dock, one can set “Prefer tabs when opening
+documents” to “Always”.  This setting is not compatible with the tk/tkinter
+GUI framework used by IDLE, and it breaks a few IDLE features.</p>
+</section>
+<section id="extensions">
+<h3>Extensions<a class="headerlink" href="#extensions" title="Link to this heading">¶</a></h3>
+<p>IDLE contains an extension facility.  Preferences for extensions can be
+changed with the Extensions tab of the preferences dialog. See the
+beginning of config-extensions.def in the idlelib directory for further
+information.  The only current default extension is zzdummy, an example
+also used for testing.</p>
+</section>
+</section>
+<section id="module-idlelib">
+<span id="idlelib-implementation-of-idle-application"></span><h2>idlelib — implementation of IDLE application<a class="headerlink" href="#module-idlelib" title="Link to this heading">¶</a></h2>
+<p><strong>Source code:</strong> <a class="extlink-source reference external" href="https://github.com/python/cpython/tree/main/Lib/idlelib">Lib/idlelib</a></p>
+<hr class="docutils" />
+<p>The Lib/idlelib package implements the IDLE application.  See the rest
+of this page for how to use IDLE.</p>
+<p>The files in idlelib are described in idlelib/README.txt.  Access it
+either in idlelib or click Help =&gt; About IDLE on the IDLE menu.  This
+file also maps IDLE menu items to the code that implements the item.
+Except for files listed under ‘Startup’, the idlelib code is ‘private’ in
+sense that feature changes can be backported (see <span class="target" id="index-9"></span><a class="pep reference external" href="https://peps.python.org/pep-0434/"><strong>PEP 434</strong></a>).</p>
+</section>
+</section>
+
+
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.py
new file mode 100644
index 0000000000000000000000000000000000000000..48e7eca280ebf8157255d3d3fdb5bad4c2efcdb3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help.py
@@ -0,0 +1,343 @@
+""" help.py: Implement the Idle help menu.
+Contents are subject to revision at any time, without notice.
+
+
+Help => About IDLE: display About Idle dialog
+
+<to be moved here from help_about.py>
+
+
+Help => IDLE Help: Display help.html with proper formatting.
+Doc/library/idle.rst (Sphinx)=> Doc/build/html/library/idle.html
+(help.copy_strip)=> Lib/idlelib/help.html
+
+HelpParser - Parse help.html and render to tk Text.
+
+HelpText - Display formatted help.html.
+
+HelpFrame - Contain text, scrollbar, and table-of-contents.
+(This will be needed for display in a future tabbed window.)
+
+HelpWindow - Display HelpFrame in a standalone window.
+
+copy_strip - Copy the text part of idle.html to help.html while rstripping each line.
+
+show_idlehelp - Create HelpWindow.  Called in EditorWindow.help_dialog.
+
+_get_dochome() - Return path to docs on user's system if present,
+otherwise return link to docs.python.org.
+"""
+import os
+import sys
+from html.parser import HTMLParser
+from os.path import abspath, dirname, isfile, join
+from platform import python_version
+
+from tkinter import Toplevel, Text, Menu
+from tkinter.ttk import Frame, Menubutton, Scrollbar, Style
+from tkinter import font as tkfont
+
+from idlelib.config import idleConf
+from idlelib.colorizer import color_config
+
+## About IDLE ##
+
+
+## IDLE Help ##
+
+class HelpParser(HTMLParser):
+    """Render help.html into a text widget.
+
+    The overridden handle_xyz methods handle a subset of html tags.
+    The supplied text should have the needed tag configurations.
+    The behavior for unsupported tags, such as table, is undefined.
+    If the tags generated by Sphinx change, this class, especially
+    the handle_starttag and handle_endtags methods, might have to also.
+    """
+    def __init__(self, text):
+        HTMLParser.__init__(self, convert_charrefs=True)
+        self.text = text         # Text widget we're rendering into.
+        self.tags = ''           # Current block level text tags to apply.
+        self.chartags = ''       # Current character level text tags.
+        self.hdrlink = False     # Exclude html header links.
+        self.level = 0           # Track indentation level.
+        self.pre = False         # Displaying preformatted text?
+        self.hprefix = ''        # Heading prefix (like '25.5'?) to remove.
+        self.nested_dl = False   # In a nested <dl>?
+        self.simplelist = False  # In a simple list (no double spacing)?
+        self.toc = []            # Pair headers with text indexes for toc.
+        self.header = ''         # Text within header tags for toc.
+        self.prevtag = None      # Previous tag info (opener?, tag).
+
+    def indent(self, amt=1):
+        "Change indent (+1, 0, -1) and tags."
+        self.level += amt
+        self.tags = '' if self.level == 0 else 'l'+str(self.level)
+
+    def handle_starttag(self, tag, attrs):
+        "Handle starttags in help.html."
+        class_ = ''
+        for a, v in attrs:
+            if a == 'class':
+                class_ = v
+        s = ''
+        if tag == 'p' and self.prevtag and not self.prevtag[0]:
+            # Begin a new block for <p> tags after a closed tag.
+            # Avoid extra lines, e.g. after <pre> tags.
+            lastline = self.text.get('end-1c linestart', 'end-1c')
+            s = '\n\n' if lastline and not lastline.isspace() else '\n'
+        elif tag == 'span' and class_ == 'pre':
+            self.chartags = 'pre'
+        elif tag == 'span' and class_ == 'versionmodified':
+            self.chartags = 'em'
+        elif tag == 'em':
+            self.chartags = 'em'
+        elif tag in ['ul', 'ol']:
+            if class_.find('simple') != -1:
+                s = '\n'
+                self.simplelist = True
+            else:
+                self.simplelist = False
+            self.indent()
+        elif tag == 'dl':
+            if self.level > 0:
+                self.nested_dl = True
+        elif tag == 'li':
+            s = '\n* '
+        elif tag == 'dt':
+            s = '\n\n' if not self.nested_dl else '\n'  # Avoid extra line.
+            self.nested_dl = False
+        elif tag == 'dd':
+            self.indent()
+            s = '\n'
+        elif tag == 'pre':
+            self.pre = True
+            self.text.insert('end', '\n\n')
+            self.tags = 'preblock'
+        elif tag == 'a' and class_ == 'headerlink':
+            self.hdrlink = True
+        elif tag == 'h1':
+            self.tags = tag
+        elif tag in ['h2', 'h3']:
+            self.header = ''
+            self.text.insert('end', '\n\n')
+            self.tags = tag
+        self.text.insert('end', s, (self.tags, self.chartags))
+        self.prevtag = (True, tag)
+
+    def handle_endtag(self, tag):
+        "Handle endtags in help.html."
+        if tag in ['h1', 'h2', 'h3']:
+            assert self.level == 0
+            indent = ('        ' if tag == 'h3' else
+                      '    ' if tag == 'h2' else
+                      '')
+            self.toc.append((indent+self.header, self.text.index('insert')))
+            self.tags = ''
+        elif tag in ['span', 'em']:
+            self.chartags = ''
+        elif tag == 'a':
+            self.hdrlink = False
+        elif tag == 'pre':
+            self.pre = False
+            self.tags = ''
+        elif tag in ['ul', 'dd', 'ol']:
+            self.indent(-1)
+        self.prevtag = (False, tag)
+
+    def handle_data(self, data):
+        "Handle date segments in help.html."
+        if not self.hdrlink:
+            d = data if self.pre else data.replace('\n', ' ')
+            if self.tags == 'h1':
+                try:
+                    self.hprefix = d[:d.index(' ')]
+                    if not self.hprefix.isdigit():
+                        self.hprefix = ''
+                except ValueError:
+                    self.hprefix = ''
+            if self.tags in ['h1', 'h2', 'h3']:
+                if (self.hprefix != '' and
+                    d[0:len(self.hprefix)] == self.hprefix):
+                    d = d[len(self.hprefix):]
+                self.header += d.strip()
+            self.text.insert('end', d, (self.tags, self.chartags))
+
+
+class HelpText(Text):
+    "Display help.html."
+    def __init__(self, parent, filename):
+        "Configure tags and feed file to parser."
+        uwide = idleConf.GetOption('main', 'EditorWindow', 'width', type='int')
+        uhigh = idleConf.GetOption('main', 'EditorWindow', 'height', type='int')
+        uhigh = 3 * uhigh // 4  # Lines average 4/3 of editor line height.
+        Text.__init__(self, parent, wrap='word', highlightthickness=0,
+                      padx=5, borderwidth=0, width=uwide, height=uhigh)
+
+        normalfont = self.findfont(['TkDefaultFont', 'arial', 'helvetica'])
+        fixedfont = self.findfont(['TkFixedFont', 'monaco', 'courier'])
+        color_config(self)
+        self['font'] = (normalfont, 12)
+        self.tag_configure('em', font=(normalfont, 12, 'italic'))
+        self.tag_configure('h1', font=(normalfont, 20, 'bold'))
+        self.tag_configure('h2', font=(normalfont, 18, 'bold'))
+        self.tag_configure('h3', font=(normalfont, 15, 'bold'))
+        self.tag_configure('pre', font=(fixedfont, 12))
+        preback = self['selectbackground']
+        self.tag_configure('preblock', font=(fixedfont, 10), lmargin1=25,
+                           background=preback)
+        self.tag_configure('l1', lmargin1=25, lmargin2=25)
+        self.tag_configure('l2', lmargin1=50, lmargin2=50)
+        self.tag_configure('l3', lmargin1=75, lmargin2=75)
+        self.tag_configure('l4', lmargin1=100, lmargin2=100)
+
+        self.parser = HelpParser(self)
+        with open(filename, encoding='utf-8') as f:
+            contents = f.read()
+        self.parser.feed(contents)
+        self['state'] = 'disabled'
+
+    def findfont(self, names):
+        "Return name of first font family derived from names."
+        for name in names:
+            if name.lower() in (x.lower() for x in tkfont.names(root=self)):
+                font = tkfont.Font(name=name, exists=True, root=self)
+                return font.actual()['family']
+            elif name.lower() in (x.lower()
+                                  for x in tkfont.families(root=self)):
+                return name
+
+
+class HelpFrame(Frame):
+    "Display html text, scrollbar, and toc."
+    def __init__(self, parent, filename):
+        Frame.__init__(self, parent)
+        self.text = text = HelpText(self, filename)
+        self.style = Style(parent)
+        self['style'] = 'helpframe.TFrame'
+        self.style.configure('helpframe.TFrame', background=text['background'])
+        self.toc = toc = self.toc_menu(text)
+        self.scroll = scroll = Scrollbar(self, command=text.yview)
+        text['yscrollcommand'] = scroll.set
+
+        self.rowconfigure(0, weight=1)
+        self.columnconfigure(1, weight=1)  # Only expand the text widget.
+        toc.grid(row=0, column=0, sticky='nw')
+        text.grid(row=0, column=1, sticky='nsew')
+        scroll.grid(row=0, column=2, sticky='ns')
+
+    def toc_menu(self, text):
+        "Create table of contents as drop-down menu."
+        toc = Menubutton(self, text='TOC')
+        drop = Menu(toc, tearoff=False)
+        for lbl, dex in text.parser.toc:
+            drop.add_command(label=lbl, command=lambda dex=dex:text.yview(dex))
+        toc['menu'] = drop
+        return toc
+
+
+class HelpWindow(Toplevel):
+    "Display frame with rendered html."
+    def __init__(self, parent, filename, title):
+        Toplevel.__init__(self, parent)
+        self.wm_title(title)
+        self.protocol("WM_DELETE_WINDOW", self.destroy)
+        self.frame = HelpFrame(self, filename)
+        self.frame.grid(column=0, row=0, sticky='nsew')
+        self.grid_columnconfigure(0, weight=1)
+        self.grid_rowconfigure(0, weight=1)
+
+
+def copy_strip():  # pragma: no cover
+    """Copy the text part of idle.html to idlelib/help.html while stripping trailing whitespace.
+
+    Files with trailing whitespace cannot be pushed to the git cpython
+    repository.  For 3.x (on Windows), help.html is generated, after
+    editing idle.rst on the master branch, with
+      sphinx-build -bhtml . build/html
+      python_d.exe -c "from idlelib.help import copy_strip; copy_strip()"
+    Check build/html/library/idle.html, the help.html diff, and the text
+    displayed by Help => IDLE Help.  Add a blurb and create a PR.
+
+    It can be worthwhile to occasionally generate help.html without
+    touching idle.rst.  Changes to the master version and to the doc
+    build system may result in changes that should not change
+    the displayed text, but might break HelpParser.
+
+    As long as master and maintenance versions of idle.rst remain the
+    same, help.html can be backported.  The internal Python version
+    number is not displayed.  If maintenance idle.rst diverges from
+    the master version, then instead of backporting help.html from
+    master, repeat the procedure above to generate a maintenance
+    version.
+    """
+    src = join(abspath(dirname(dirname(dirname(__file__)))),
+            'Doc', 'build', 'html', 'library', 'idle.html')
+    dst = join(abspath(dirname(__file__)), 'help.html')
+
+    with open(src, 'r', encoding="utf-8") as inn, open(dst, 'w', encoding="utf-8") as out:
+        copy = False
+        for line in inn:
+            if '<section id="idle">' in line: copy = True
+            if '<div class="clearer">' in line: break
+            if copy: out.write(line.strip() + '\n')
+
+    print(f'{src} copied to {dst}')
+
+
+def show_idlehelp(parent):
+    "Create HelpWindow; called from Idle Help event handler."
+    filename = join(abspath(dirname(__file__)), 'help.html')
+    if not isfile(filename):  # pragma: no cover
+        # Try copy_strip, present message.
+        return
+    return HelpWindow(parent, filename, 'IDLE Doc (%s)' % python_version())
+
+
+def _get_dochome():
+    "Return path to local docs if present, otherwise link to docs.python.org."
+
+    dochome = os.path.join(sys.base_prefix, 'Doc', 'index.html')
+    if sys.platform.count('linux'):
+        # look for html docs in a couple of standard places
+        pyver = 'python-docs-' + '%s.%s.%s' % sys.version_info[:3]
+        if os.path.isdir('/var/www/html/python/'):  # rpm package manager
+            dochome = '/var/www/html/python/index.html'
+        else:
+            basepath = '/usr/share/doc/'  # dnf/apt package managers
+            dochome = os.path.join(basepath, pyver, 'Doc', 'index.html')
+
+    elif sys.platform[:3] == 'win':
+        import winreg  # Windows only, block only executed once.
+        docfile = ''
+        KEY = (rf"Software\Python\PythonCore\{sys.winver}"
+               r"\Help\Main Python Documentation")
+        try:
+            docfile = winreg.QueryValue(winreg.HKEY_CURRENT_USER, KEY)
+        except FileNotFoundError:
+            try:
+                docfile = winreg.QueryValue(winreg.HKEY_LOCAL_MACHINE, KEY)
+            except FileNotFoundError:
+                pass
+        if os.path.isfile(docfile):
+            dochome = docfile
+    elif sys.platform == 'darwin':
+        # documentation may be stored inside a python framework
+        dochome = os.path.join(sys.base_prefix,
+                               'Resources/English.lproj/Documentation/index.html')
+    dochome = os.path.normpath(dochome)
+    if os.path.isfile(dochome):
+        if sys.platform == 'darwin':
+            # Safari requires real file:-URLs
+            return 'file://' + dochome
+        return dochome
+    else:
+        return "https://docs.python.org/%d.%d/" % sys.version_info[:2]
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_help', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(show_idlehelp)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help_about.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help_about.py
new file mode 100644
index 0000000000000000000000000000000000000000..750da373272298ac1801a66b7cfc0d2c3be6915a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/help_about.py
@@ -0,0 +1,211 @@
+"""About Dialog for IDLE
+
+"""
+import os
+import sys
+import webbrowser
+from platform import python_version, architecture
+
+from tkinter import Toplevel, Frame, Label, Button, PhotoImage
+from tkinter import SUNKEN, TOP, BOTTOM, LEFT, X, BOTH, W, EW, NSEW, E
+
+from idlelib import textview
+
+pyver = python_version()
+
+if sys.platform == 'darwin':
+    bits = '64' if sys.maxsize > 2**32 else '32'
+else:
+    bits = architecture()[0][:2]
+
+
+class AboutDialog(Toplevel):
+    """Modal about dialog for idle
+
+    """
+    def __init__(self, parent, title=None, *, _htest=False, _utest=False):
+        """Create popup, do not return until tk widget destroyed.
+
+        parent - parent of this dialog
+        title - string which is title of popup dialog
+        _htest - bool, change box location when running htest
+        _utest - bool, don't wait_window when running unittest
+        """
+        Toplevel.__init__(self, parent)
+        self.configure(borderwidth=5)
+        # place dialog below parent if running htest
+        self.geometry("+%d+%d" % (
+                        parent.winfo_rootx()+30,
+                        parent.winfo_rooty()+(30 if not _htest else 100)))
+        self.bg = "#bbbbbb"
+        self.fg = "#000000"
+        self.create_widgets()
+        self.resizable(height=False, width=False)
+        self.title(title or
+                   f'About IDLE {pyver} ({bits} bit)')
+        self.transient(parent)
+        self.grab_set()
+        self.protocol("WM_DELETE_WINDOW", self.ok)
+        self.parent = parent
+        self.button_ok.focus_set()
+        self.bind('<Return>', self.ok)  # dismiss dialog
+        self.bind('<Escape>', self.ok)  # dismiss dialog
+        self._current_textview = None
+        self._utest = _utest
+
+        if not _utest:
+            self.deiconify()
+            self.wait_window()
+
+    def create_widgets(self):
+        frame = Frame(self, borderwidth=2, relief=SUNKEN)
+        frame_buttons = Frame(self)
+        frame_buttons.pack(side=BOTTOM, fill=X)
+        frame.pack(side=TOP, expand=True, fill=BOTH)
+        self.button_ok = Button(frame_buttons, text='Close',
+                                command=self.ok)
+        self.button_ok.pack(padx=5, pady=5)
+
+        frame_background = Frame(frame, bg=self.bg)
+        frame_background.pack(expand=True, fill=BOTH)
+
+        header = Label(frame_background, text='IDLE', fg=self.fg,
+                       bg=self.bg, font=('courier', 24, 'bold'))
+        header.grid(row=0, column=0, sticky=E, padx=10, pady=10)
+
+        tkpatch = self._root().getvar('tk_patchLevel')
+        ext = '.png' if tkpatch >= '8.6' else '.gif'
+        icon = os.path.join(os.path.abspath(os.path.dirname(__file__)),
+                            'Icons', f'idle_48{ext}')
+        self.icon_image = PhotoImage(master=self._root(), file=icon)
+        logo = Label(frame_background, image=self.icon_image, bg=self.bg)
+        logo.grid(row=0, column=0, sticky=W, rowspan=2, padx=10, pady=10)
+
+        byline_text = "Python's Integrated Development\nand Learning Environment" + 5*'\n'
+        byline = Label(frame_background, text=byline_text, justify=LEFT,
+                       fg=self.fg, bg=self.bg)
+        byline.grid(row=2, column=0, sticky=W, columnspan=3, padx=10, pady=5)
+
+        forums_url = "https://discuss.python.org"
+        forums = Button(frame_background, text='Python (and IDLE) Discussion', width=35,
+                                 highlightbackground=self.bg,
+                                 command=lambda: webbrowser.open(forums_url))
+        forums.grid(row=6, column=0, sticky=W, padx=10, pady=10)
+
+
+        docs_url = ("https://docs.python.org/%d.%d/library/idle.html" %
+                    sys.version_info[:2])
+        docs = Button(frame_background, text='IDLE Documentation', width=35,
+                                 highlightbackground=self.bg,
+                                 command=lambda: webbrowser.open(docs_url))
+        docs.grid(row=7, column=0, columnspan=2, sticky=W, padx=10, pady=10)
+
+
+        Frame(frame_background, borderwidth=1, relief=SUNKEN,
+              height=2, bg=self.bg).grid(row=8, column=0, sticky=EW,
+                                         columnspan=3, padx=5, pady=5)
+
+        tclver = str(self.info_patchlevel())
+        tkver = ' and ' + tkpatch if tkpatch != tclver else ''
+        versions = f"Python {pyver} with tcl/tk {tclver}{tkver}"
+        vers = Label(frame_background, text=versions, fg=self.fg, bg=self.bg)
+        vers.grid(row=9, column=0, sticky=W, padx=10, pady=0)
+        py_buttons = Frame(frame_background, bg=self.bg)
+        py_buttons.grid(row=10, column=0, columnspan=2, sticky=NSEW)
+        self.py_license = Button(py_buttons, text='License', width=8,
+                                 highlightbackground=self.bg,
+                                 command=self.show_py_license)
+        self.py_license.pack(side=LEFT, padx=10, pady=10)
+        self.py_copyright = Button(py_buttons, text='Copyright', width=8,
+                                   highlightbackground=self.bg,
+                                   command=self.show_py_copyright)
+        self.py_copyright.pack(side=LEFT, padx=10, pady=10)
+        self.py_credits = Button(py_buttons, text='Credits', width=8,
+                                 highlightbackground=self.bg,
+                                 command=self.show_py_credits)
+        self.py_credits.pack(side=LEFT, padx=10, pady=10)
+
+        Frame(frame_background, borderwidth=1, relief=SUNKEN,
+              height=2, bg=self.bg).grid(row=11, column=0, sticky=EW,
+                                         columnspan=3, padx=5, pady=5)
+
+        idle = Label(frame_background, text='IDLE', fg=self.fg, bg=self.bg)
+        idle.grid(row=12, column=0, sticky=W, padx=10, pady=0)
+        idle_buttons = Frame(frame_background, bg=self.bg)
+        idle_buttons.grid(row=13, column=0, columnspan=3, sticky=NSEW)
+        self.readme = Button(idle_buttons, text='Readme', width=8,
+                             highlightbackground=self.bg,
+                             command=self.show_readme)
+        self.readme.pack(side=LEFT, padx=10, pady=10)
+        self.idle_news = Button(idle_buttons, text='News', width=8,
+                                highlightbackground=self.bg,
+                                command=self.show_idle_news)
+        self.idle_news.pack(side=LEFT, padx=10, pady=10)
+        self.idle_credits = Button(idle_buttons, text='Credits', width=8,
+                                   highlightbackground=self.bg,
+                                   command=self.show_idle_credits)
+        self.idle_credits.pack(side=LEFT, padx=10, pady=10)
+
+    # License, copyright, and credits are of type _sitebuiltins._Printer
+    def show_py_license(self):
+        "Handle License button event."
+        self.display_printer_text('About - License', license)
+
+    def show_py_copyright(self):
+        "Handle Copyright button event."
+        self.display_printer_text('About - Copyright', copyright)
+
+    def show_py_credits(self):
+        "Handle Python Credits button event."
+        self.display_printer_text('About - Python Credits', credits)
+
+    # Encode CREDITS.txt to utf-8 for proper version of Loewis.
+    # Specify others as ascii until need utf-8, so catch errors.
+    def show_idle_credits(self):
+        "Handle Idle Credits button event."
+        self.display_file_text('About - Credits', 'CREDITS.txt', 'utf-8')
+
+    def show_readme(self):
+        "Handle Readme button event."
+        self.display_file_text('About - Readme', 'README.txt', 'ascii')
+
+    def show_idle_news(self):
+        "Handle News button event."
+        self.display_file_text('About - News', 'News3.txt', 'utf-8')
+
+    def display_printer_text(self, title, printer):
+        """Create textview for built-in constants.
+
+        Built-in constants have type _sitebuiltins._Printer.  The
+        text is extracted from the built-in and then sent to a text
+        viewer with self as the parent and title as the title of
+        the popup.
+        """
+        printer._Printer__setup()
+        text = '\n'.join(printer._Printer__lines)
+        self._current_textview = textview.view_text(
+            self, title, text, _utest=self._utest)
+
+    def display_file_text(self, title, filename, encoding=None):
+        """Create textview for filename.
+
+        The filename needs to be in the current directory.  The path
+        is sent to a text viewer with self as the parent, title as
+        the title of the popup, and the file encoding.
+        """
+        fn = os.path.join(os.path.abspath(os.path.dirname(__file__)), filename)
+        self._current_textview = textview.view_file(
+            self, title, fn, encoding, _utest=self._utest)
+
+    def ok(self, event=None):
+        "Dismiss help_about dialog."
+        self.grab_release()
+        self.destroy()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_help_about', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(AboutDialog)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/history.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/history.py
new file mode 100644
index 0000000000000000000000000000000000000000..5a9b32aaf6bb815559d19ccca55611764abdaf16
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/history.py
@@ -0,0 +1,106 @@
+"Implement Idle Shell history mechanism with History class"
+
+from idlelib.config import idleConf
+
+
+class History:
+    ''' Implement Idle Shell history mechanism.
+
+    store - Store source statement (called from pyshell.resetoutput).
+    fetch - Fetch stored statement matching prefix already entered.
+    history_next - Bound to <<history-next>> event (default Alt-N).
+    history_prev - Bound to <<history-prev>> event (default Alt-P).
+    '''
+    def __init__(self, text):
+        '''Initialize data attributes and bind event methods.
+
+        .text - Idle wrapper of tk Text widget, with .bell().
+        .history - source statements, possibly with multiple lines.
+        .prefix - source already entered at prompt; filters history list.
+        .pointer - index into history.
+        .cyclic - wrap around history list (or not).
+        '''
+        self.text = text
+        self.history = []
+        self.prefix = None
+        self.pointer = None
+        self.cyclic = idleConf.GetOption("main", "History", "cyclic", 1, "bool")
+        text.bind("<<history-previous>>", self.history_prev)
+        text.bind("<<history-next>>", self.history_next)
+
+    def history_next(self, event):
+        "Fetch later statement; start with earliest if cyclic."
+        self.fetch(reverse=False)
+        return "break"
+
+    def history_prev(self, event):
+        "Fetch earlier statement; start with most recent."
+        self.fetch(reverse=True)
+        return "break"
+
+    def fetch(self, reverse):
+        '''Fetch statement and replace current line in text widget.
+
+        Set prefix and pointer as needed for successive fetches.
+        Reset them to None, None when returning to the start line.
+        Sound bell when return to start line or cannot leave a line
+        because cyclic is False.
+        '''
+        nhist = len(self.history)
+        pointer = self.pointer
+        prefix = self.prefix
+        if pointer is not None and prefix is not None:
+            if self.text.compare("insert", "!=", "end-1c") or \
+                    self.text.get("iomark", "end-1c") != self.history[pointer]:
+                pointer = prefix = None
+                self.text.mark_set("insert", "end-1c")  # != after cursor move
+        if pointer is None or prefix is None:
+            prefix = self.text.get("iomark", "end-1c")
+            if reverse:
+                pointer = nhist  # will be decremented
+            else:
+                if self.cyclic:
+                    pointer = -1  # will be incremented
+                else:  # abort history_next
+                    self.text.bell()
+                    return
+        nprefix = len(prefix)
+        while True:
+            pointer += -1 if reverse else 1
+            if pointer < 0 or pointer >= nhist:
+                self.text.bell()
+                if not self.cyclic and pointer < 0:  # abort history_prev
+                    return
+                else:
+                    if self.text.get("iomark", "end-1c") != prefix:
+                        self.text.delete("iomark", "end-1c")
+                        self.text.insert("iomark", prefix, "stdin")
+                    pointer = prefix = None
+                break
+            item = self.history[pointer]
+            if item[:nprefix] == prefix and len(item) > nprefix:
+                self.text.delete("iomark", "end-1c")
+                self.text.insert("iomark", item, "stdin")
+                break
+        self.text.see("insert")
+        self.text.tag_remove("sel", "1.0", "end")
+        self.pointer = pointer
+        self.prefix = prefix
+
+    def store(self, source):
+        "Store Shell input statement into history list."
+        source = source.strip()
+        if len(source) > 2:
+            # avoid duplicates
+            try:
+                self.history.remove(source)
+            except ValueError:
+                pass
+            self.history.append(source)
+        self.pointer = None
+        self.prefix = None
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_history', verbosity=2, exit=False)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/hyperparser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/hyperparser.py
new file mode 100644
index 0000000000000000000000000000000000000000..76144ee8fb30f5eb143d4fe50343393892c23154
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/hyperparser.py
@@ -0,0 +1,312 @@
+"""Provide advanced parsing abilities for ParenMatch and other extensions.
+
+HyperParser uses PyParser.  PyParser mostly gives information on the
+proper indentation of code.  HyperParser gives additional information on
+the structure of code.
+"""
+from keyword import iskeyword
+import string
+
+from idlelib import pyparse
+
+# all ASCII chars that may be in an identifier
+_ASCII_ID_CHARS = frozenset(string.ascii_letters + string.digits + "_")
+# all ASCII chars that may be the first char of an identifier
+_ASCII_ID_FIRST_CHARS = frozenset(string.ascii_letters + "_")
+
+# lookup table for whether 7-bit ASCII chars are valid in a Python identifier
+_IS_ASCII_ID_CHAR = [(chr(x) in _ASCII_ID_CHARS) for x in range(128)]
+# lookup table for whether 7-bit ASCII chars are valid as the first
+# char in a Python identifier
+_IS_ASCII_ID_FIRST_CHAR = \
+    [(chr(x) in _ASCII_ID_FIRST_CHARS) for x in range(128)]
+
+
+class HyperParser:
+    def __init__(self, editwin, index):
+        "To initialize, analyze the surroundings of the given index."
+
+        self.editwin = editwin
+        self.text = text = editwin.text
+
+        parser = pyparse.Parser(editwin.indentwidth, editwin.tabwidth)
+
+        def index2line(index):
+            return int(float(index))
+        lno = index2line(text.index(index))
+
+        if not editwin.prompt_last_line:
+            for context in editwin.num_context_lines:
+                startat = max(lno - context, 1)
+                startatindex = repr(startat) + ".0"
+                stopatindex = "%d.end" % lno
+                # We add the newline because PyParse requires a newline
+                # at end. We add a space so that index won't be at end
+                # of line, so that its status will be the same as the
+                # char before it, if should.
+                parser.set_code(text.get(startatindex, stopatindex)+' \n')
+                bod = parser.find_good_parse_start(
+                          editwin._build_char_in_string_func(startatindex))
+                if bod is not None or startat == 1:
+                    break
+            parser.set_lo(bod or 0)
+        else:
+            r = text.tag_prevrange("console", index)
+            if r:
+                startatindex = r[1]
+            else:
+                startatindex = "1.0"
+            stopatindex = "%d.end" % lno
+            # We add the newline because PyParse requires it. We add a
+            # space so that index won't be at end of line, so that its
+            # status will be the same as the char before it, if should.
+            parser.set_code(text.get(startatindex, stopatindex)+' \n')
+            parser.set_lo(0)
+
+        # We want what the parser has, minus the last newline and space.
+        self.rawtext = parser.code[:-2]
+        # Parser.code apparently preserves the statement we are in, so
+        # that stopatindex can be used to synchronize the string with
+        # the text box indices.
+        self.stopatindex = stopatindex
+        self.bracketing = parser.get_last_stmt_bracketing()
+        # find which pairs of bracketing are openers. These always
+        # correspond to a character of rawtext.
+        self.isopener = [i>0 and self.bracketing[i][1] >
+                         self.bracketing[i-1][1]
+                         for i in range(len(self.bracketing))]
+
+        self.set_index(index)
+
+    def set_index(self, index):
+        """Set the index to which the functions relate.
+
+        The index must be in the same statement.
+        """
+        indexinrawtext = (len(self.rawtext) -
+                          len(self.text.get(index, self.stopatindex)))
+        if indexinrawtext < 0:
+            raise ValueError("Index %s precedes the analyzed statement"
+                             % index)
+        self.indexinrawtext = indexinrawtext
+        # find the rightmost bracket to which index belongs
+        self.indexbracket = 0
+        while (self.indexbracket < len(self.bracketing)-1 and
+               self.bracketing[self.indexbracket+1][0] < self.indexinrawtext):
+            self.indexbracket += 1
+        if (self.indexbracket < len(self.bracketing)-1 and
+            self.bracketing[self.indexbracket+1][0] == self.indexinrawtext and
+           not self.isopener[self.indexbracket+1]):
+            self.indexbracket += 1
+
+    def is_in_string(self):
+        """Is the index given to the HyperParser in a string?"""
+        # The bracket to which we belong should be an opener.
+        # If it's an opener, it has to have a character.
+        return (self.isopener[self.indexbracket] and
+                self.rawtext[self.bracketing[self.indexbracket][0]]
+                in ('"', "'"))
+
+    def is_in_code(self):
+        """Is the index given to the HyperParser in normal code?"""
+        return (not self.isopener[self.indexbracket] or
+                self.rawtext[self.bracketing[self.indexbracket][0]]
+                not in ('#', '"', "'"))
+
+    def get_surrounding_brackets(self, openers='([{', mustclose=False):
+        """Return bracket indexes or None.
+
+        If the index given to the HyperParser is surrounded by a
+        bracket defined in openers (or at least has one before it),
+        return the indices of the opening bracket and the closing
+        bracket (or the end of line, whichever comes first).
+
+        If it is not surrounded by brackets, or the end of line comes
+        before the closing bracket and mustclose is True, returns None.
+        """
+
+        bracketinglevel = self.bracketing[self.indexbracket][1]
+        before = self.indexbracket
+        while (not self.isopener[before] or
+              self.rawtext[self.bracketing[before][0]] not in openers or
+              self.bracketing[before][1] > bracketinglevel):
+            before -= 1
+            if before < 0:
+                return None
+            bracketinglevel = min(bracketinglevel, self.bracketing[before][1])
+        after = self.indexbracket + 1
+        while (after < len(self.bracketing) and
+              self.bracketing[after][1] >= bracketinglevel):
+            after += 1
+
+        beforeindex = self.text.index("%s-%dc" %
+            (self.stopatindex, len(self.rawtext)-self.bracketing[before][0]))
+        if (after >= len(self.bracketing) or
+           self.bracketing[after][0] > len(self.rawtext)):
+            if mustclose:
+                return None
+            afterindex = self.stopatindex
+        else:
+            # We are after a real char, so it is a ')' and we give the
+            # index before it.
+            afterindex = self.text.index(
+                "%s-%dc" % (self.stopatindex,
+                 len(self.rawtext)-(self.bracketing[after][0]-1)))
+
+        return beforeindex, afterindex
+
+    # the set of built-in identifiers which are also keywords,
+    # i.e. keyword.iskeyword() returns True for them
+    _ID_KEYWORDS = frozenset({"True", "False", "None"})
+
+    @classmethod
+    def _eat_identifier(cls, str, limit, pos):
+        """Given a string and pos, return the number of chars in the
+        identifier which ends at pos, or 0 if there is no such one.
+
+        This ignores non-identifier eywords are not identifiers.
+        """
+        is_ascii_id_char = _IS_ASCII_ID_CHAR
+
+        # Start at the end (pos) and work backwards.
+        i = pos
+
+        # Go backwards as long as the characters are valid ASCII
+        # identifier characters. This is an optimization, since it
+        # is faster in the common case where most of the characters
+        # are ASCII.
+        while i > limit and (
+                ord(str[i - 1]) < 128 and
+                is_ascii_id_char[ord(str[i - 1])]
+        ):
+            i -= 1
+
+        # If the above loop ended due to reaching a non-ASCII
+        # character, continue going backwards using the most generic
+        # test for whether a string contains only valid identifier
+        # characters.
+        if i > limit and ord(str[i - 1]) >= 128:
+            while i - 4 >= limit and ('a' + str[i - 4:pos]).isidentifier():
+                i -= 4
+            if i - 2 >= limit and ('a' + str[i - 2:pos]).isidentifier():
+                i -= 2
+            if i - 1 >= limit and ('a' + str[i - 1:pos]).isidentifier():
+                i -= 1
+
+            # The identifier candidate starts here. If it isn't a valid
+            # identifier, don't eat anything. At this point that is only
+            # possible if the first character isn't a valid first
+            # character for an identifier.
+            if not str[i:pos].isidentifier():
+                return 0
+        elif i < pos:
+            # All characters in str[i:pos] are valid ASCII identifier
+            # characters, so it is enough to check that the first is
+            # valid as the first character of an identifier.
+            if not _IS_ASCII_ID_FIRST_CHAR[ord(str[i])]:
+                return 0
+
+        # All keywords are valid identifiers, but should not be
+        # considered identifiers here, except for True, False and None.
+        if i < pos and (
+                iskeyword(str[i:pos]) and
+                str[i:pos] not in cls._ID_KEYWORDS
+        ):
+            return 0
+
+        return pos - i
+
+    # This string includes all chars that may be in a white space
+    _whitespace_chars = " \t\n\\"
+
+    def get_expression(self):
+        """Return a string with the Python expression which ends at the
+        given index, which is empty if there is no real one.
+        """
+        if not self.is_in_code():
+            raise ValueError("get_expression should only be called "
+                             "if index is inside a code.")
+
+        rawtext = self.rawtext
+        bracketing = self.bracketing
+
+        brck_index = self.indexbracket
+        brck_limit = bracketing[brck_index][0]
+        pos = self.indexinrawtext
+
+        last_identifier_pos = pos
+        postdot_phase = True
+
+        while True:
+            # Eat whitespaces, comments, and if postdot_phase is False - a dot
+            while True:
+                if pos>brck_limit and rawtext[pos-1] in self._whitespace_chars:
+                    # Eat a whitespace
+                    pos -= 1
+                elif (not postdot_phase and
+                      pos > brck_limit and rawtext[pos-1] == '.'):
+                    # Eat a dot
+                    pos -= 1
+                    postdot_phase = True
+                # The next line will fail if we are *inside* a comment,
+                # but we shouldn't be.
+                elif (pos == brck_limit and brck_index > 0 and
+                      rawtext[bracketing[brck_index-1][0]] == '#'):
+                    # Eat a comment
+                    brck_index -= 2
+                    brck_limit = bracketing[brck_index][0]
+                    pos = bracketing[brck_index+1][0]
+                else:
+                    # If we didn't eat anything, quit.
+                    break
+
+            if not postdot_phase:
+                # We didn't find a dot, so the expression end at the
+                # last identifier pos.
+                break
+
+            ret = self._eat_identifier(rawtext, brck_limit, pos)
+            if ret:
+                # There is an identifier to eat
+                pos = pos - ret
+                last_identifier_pos = pos
+                # Now, to continue the search, we must find a dot.
+                postdot_phase = False
+                # (the loop continues now)
+
+            elif pos == brck_limit:
+                # We are at a bracketing limit. If it is a closing
+                # bracket, eat the bracket, otherwise, stop the search.
+                level = bracketing[brck_index][1]
+                while brck_index > 0 and bracketing[brck_index-1][1] > level:
+                    brck_index -= 1
+                if bracketing[brck_index][0] == brck_limit:
+                    # We were not at the end of a closing bracket
+                    break
+                pos = bracketing[brck_index][0]
+                brck_index -= 1
+                brck_limit = bracketing[brck_index][0]
+                last_identifier_pos = pos
+                if rawtext[pos] in "([":
+                    # [] and () may be used after an identifier, so we
+                    # continue. postdot_phase is True, so we don't allow a dot.
+                    pass
+                else:
+                    # We can't continue after other types of brackets
+                    if rawtext[pos] in "'\"":
+                        # Scan a string prefix
+                        while pos > 0 and rawtext[pos - 1] in "rRbBuU":
+                            pos -= 1
+                        last_identifier_pos = pos
+                    break
+
+            else:
+                # We've found an operator or something.
+                break
+
+        return rawtext[last_identifier_pos:self.indexinrawtext]
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_hyperparser', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.bat b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.bat
new file mode 100644
index 0000000000000000000000000000000000000000..3d619a37eed366d1213d839b8545afc959d09b23
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.bat
@@ -0,0 +1,4 @@
+@echo off
+rem Start IDLE using the appropriate Python interpreter
+set CURRDIR=%~dp0
+start "IDLE" "%CURRDIR%..\..\pythonw.exe" "%CURRDIR%idle.pyw" %1 %2 %3 %4 %5 %6 %7 %8 %9
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.py
new file mode 100644
index 0000000000000000000000000000000000000000..485d5a75a29c1ad8f39f4558ce4759797951baa1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.py
@@ -0,0 +1,14 @@
+import os.path
+import sys
+
+
+# Enable running IDLE with idlelib in a non-standard location.
+# This was once used to run development versions of IDLE.
+# Because PEP 434 declared idle.py a public interface,
+# removal should require deprecation.
+idlelib_dir = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+if idlelib_dir not in sys.path:
+    sys.path.insert(0, idlelib_dir)
+
+from idlelib.pyshell import main  # This is subject to change
+main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.pyw b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.pyw
new file mode 100644
index 0000000000000000000000000000000000000000..e73c049b70cc5aac3687d363f3089f9c0047c4ce
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/idle.pyw
@@ -0,0 +1,17 @@
+try:
+    import idlelib.pyshell
+except ImportError:
+    # IDLE is not installed, but maybe pyshell is on sys.path:
+    from . import pyshell
+    import os
+    idledir = os.path.dirname(os.path.abspath(pyshell.__file__))
+    if idledir != os.getcwd():
+        # We're not in the IDLE directory, help the subprocess find run.py
+        pypath = os.environ.get('PYTHONPATH', '')
+        if pypath:
+            os.environ['PYTHONPATH'] = pypath + ':' + idledir
+        else:
+            os.environ['PYTHONPATH'] = idledir
+    pyshell.main()
+else:
+    idlelib.pyshell.main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/iomenu.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/iomenu.py
new file mode 100644
index 0000000000000000000000000000000000000000..464126e2df0668200b80c97cf7d3e71c7a7e7492
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/iomenu.py
@@ -0,0 +1,441 @@
+import io
+import os
+import shlex
+import sys
+import tempfile
+import tokenize
+
+from tkinter import filedialog
+from tkinter import messagebox
+from tkinter.simpledialog import askstring  # loadfile encoding.
+
+from idlelib.config import idleConf
+from idlelib.util import py_extensions
+
+py_extensions = ' '.join("*"+ext for ext in py_extensions)
+encoding = 'utf-8'
+errors = 'surrogatepass' if sys.platform == 'win32' else 'surrogateescape'
+
+
+class IOBinding:
+# One instance per editor Window so methods know which to save, close.
+# Open returns focus to self.editwin if aborted.
+# EditorWindow.open_module, others, belong here.
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+        self.text = editwin.text
+        self.__id_open = self.text.bind("<<open-window-from-file>>", self.open)
+        self.__id_save = self.text.bind("<<save-window>>", self.save)
+        self.__id_saveas = self.text.bind("<<save-window-as-file>>",
+                                          self.save_as)
+        self.__id_savecopy = self.text.bind("<<save-copy-of-window-as-file>>",
+                                            self.save_a_copy)
+        self.fileencoding = 'utf-8'
+        self.__id_print = self.text.bind("<<print-window>>", self.print_window)
+
+    def close(self):
+        # Undo command bindings
+        self.text.unbind("<<open-window-from-file>>", self.__id_open)
+        self.text.unbind("<<save-window>>", self.__id_save)
+        self.text.unbind("<<save-window-as-file>>",self.__id_saveas)
+        self.text.unbind("<<save-copy-of-window-as-file>>", self.__id_savecopy)
+        self.text.unbind("<<print-window>>", self.__id_print)
+        # Break cycles
+        self.editwin = None
+        self.text = None
+        self.filename_change_hook = None
+
+    def get_saved(self):
+        return self.editwin.get_saved()
+
+    def set_saved(self, flag):
+        self.editwin.set_saved(flag)
+
+    def reset_undo(self):
+        self.editwin.reset_undo()
+
+    filename_change_hook = None
+
+    def set_filename_change_hook(self, hook):
+        self.filename_change_hook = hook
+
+    filename = None
+    dirname = None
+
+    def set_filename(self, filename):
+        if filename and os.path.isdir(filename):
+            self.filename = None
+            self.dirname = filename
+        else:
+            self.filename = filename
+            self.dirname = None
+            self.set_saved(1)
+            if self.filename_change_hook:
+                self.filename_change_hook()
+
+    def open(self, event=None, editFile=None):
+        flist = self.editwin.flist
+        # Save in case parent window is closed (ie, during askopenfile()).
+        if flist:
+            if not editFile:
+                filename = self.askopenfile()
+            else:
+                filename=editFile
+            if filename:
+                # If editFile is valid and already open, flist.open will
+                # shift focus to its existing window.
+                # If the current window exists and is a fresh unnamed,
+                # unmodified editor window (not an interpreter shell),
+                # pass self.loadfile to flist.open so it will load the file
+                # in the current window (if the file is not already open)
+                # instead of a new window.
+                if (self.editwin and
+                        not getattr(self.editwin, 'interp', None) and
+                        not self.filename and
+                        self.get_saved()):
+                    flist.open(filename, self.loadfile)
+                else:
+                    flist.open(filename)
+            else:
+                if self.text:
+                    self.text.focus_set()
+            return "break"
+
+        # Code for use outside IDLE:
+        if self.get_saved():
+            reply = self.maybesave()
+            if reply == "cancel":
+                self.text.focus_set()
+                return "break"
+        if not editFile:
+            filename = self.askopenfile()
+        else:
+            filename=editFile
+        if filename:
+            self.loadfile(filename)
+        else:
+            self.text.focus_set()
+        return "break"
+
+    eol_convention = os.linesep  # default
+
+    def loadfile(self, filename):
+        try:
+            try:
+                with tokenize.open(filename) as f:
+                    chars = f.read()
+                    fileencoding = f.encoding
+                    eol_convention = f.newlines
+                    converted = False
+            except (UnicodeDecodeError, SyntaxError):
+                # Wait for the editor window to appear
+                self.editwin.text.update()
+                enc = askstring(
+                    "Specify file encoding",
+                    "The file's encoding is invalid for Python 3.x.\n"
+                    "IDLE will convert it to UTF-8.\n"
+                    "What is the current encoding of the file?",
+                    initialvalue='utf-8',
+                    parent=self.editwin.text)
+                with open(filename, encoding=enc) as f:
+                    chars = f.read()
+                    fileencoding = f.encoding
+                    eol_convention = f.newlines
+                    converted = True
+        except OSError as err:
+            messagebox.showerror("I/O Error", str(err), parent=self.text)
+            return False
+        except UnicodeDecodeError:
+            messagebox.showerror("Decoding Error",
+                                   "File %s\nFailed to Decode" % filename,
+                                   parent=self.text)
+            return False
+
+        if not isinstance(eol_convention, str):
+            # If the file does not contain line separators, it is None.
+            # If the file contains mixed line separators, it is a tuple.
+            if eol_convention is not None:
+                messagebox.showwarning("Mixed Newlines",
+                                         "Mixed newlines detected.\n"
+                                         "The file will be changed on save.",
+                                         parent=self.text)
+                converted = True
+            eol_convention = os.linesep  # default
+
+        self.text.delete("1.0", "end")
+        self.set_filename(None)
+        self.fileencoding = fileencoding
+        self.eol_convention = eol_convention
+        self.text.insert("1.0", chars)
+        self.reset_undo()
+        self.set_filename(filename)
+        if converted:
+            # We need to save the conversion results first
+            # before being able to execute the code
+            self.set_saved(False)
+        self.text.mark_set("insert", "1.0")
+        self.text.yview("insert")
+        self.updaterecentfileslist(filename)
+        return True
+
+    def maybesave(self):
+        """Return 'yes', 'no', 'cancel' as appropriate.
+
+        Tkinter messagebox.askyesnocancel converts these tk responses
+        to True, False, None.  Convert back, as now expected elsewhere.
+        """
+        if self.get_saved():
+            return "yes"
+        message = ("Do you want to save "
+                   f"{self.filename or 'this untitled document'}"
+                   " before closing?")
+        confirm = messagebox.askyesnocancel(
+                  title="Save On Close",
+                  message=message,
+                  default=messagebox.YES,
+                  parent=self.text)
+        if confirm:
+            self.save(None)
+            reply = "yes" if self.get_saved() else "cancel"
+        else:  reply = "cancel" if confirm is None else "no"
+        self.text.focus_set()
+        return reply
+
+    def save(self, event):
+        if not self.filename:
+            self.save_as(event)
+        else:
+            if self.writefile(self.filename):
+                self.set_saved(True)
+                try:
+                    self.editwin.store_file_breaks()
+                except AttributeError:  # may be a PyShell
+                    pass
+        self.text.focus_set()
+        return "break"
+
+    def save_as(self, event):
+        filename = self.asksavefile()
+        if filename:
+            if self.writefile(filename):
+                self.set_filename(filename)
+                self.set_saved(1)
+                try:
+                    self.editwin.store_file_breaks()
+                except AttributeError:
+                    pass
+        self.text.focus_set()
+        self.updaterecentfileslist(filename)
+        return "break"
+
+    def save_a_copy(self, event):
+        filename = self.asksavefile()
+        if filename:
+            self.writefile(filename)
+        self.text.focus_set()
+        self.updaterecentfileslist(filename)
+        return "break"
+
+    def writefile(self, filename):
+        text = self.fixnewlines()
+        chars = self.encode(text)
+        try:
+            with open(filename, "wb") as f:
+                f.write(chars)
+                f.flush()
+                os.fsync(f.fileno())
+            return True
+        except OSError as msg:
+            messagebox.showerror("I/O Error", str(msg),
+                                   parent=self.text)
+            return False
+
+    def fixnewlines(self):
+        """Return text with os eols.
+
+        Add prompts if shell else final \n if missing.
+        """
+
+        if hasattr(self.editwin, "interp"):  # Saving shell.
+            text = self.editwin.get_prompt_text('1.0', self.text.index('end-1c'))
+        else:
+            if self.text.get("end-2c") != '\n':
+                self.text.insert("end-1c", "\n")  # Changes 'end-1c' value.
+            text = self.text.get('1.0', "end-1c")
+        if self.eol_convention != "\n":
+            text = text.replace("\n", self.eol_convention)
+        return text
+
+    def encode(self, chars):
+        if isinstance(chars, bytes):
+            # This is either plain ASCII, or Tk was returning mixed-encoding
+            # text to us. Don't try to guess further.
+            return chars
+        # Preserve a BOM that might have been present on opening
+        if self.fileencoding == 'utf-8-sig':
+            return chars.encode('utf-8-sig')
+        # See whether there is anything non-ASCII in it.
+        # If not, no need to figure out the encoding.
+        try:
+            return chars.encode('ascii')
+        except UnicodeEncodeError:
+            pass
+        # Check if there is an encoding declared
+        try:
+            encoded = chars.encode('ascii', 'replace')
+            enc, _ = tokenize.detect_encoding(io.BytesIO(encoded).readline)
+            return chars.encode(enc)
+        except SyntaxError as err:
+            failed = str(err)
+        except UnicodeEncodeError:
+            failed = "Invalid encoding '%s'" % enc
+        messagebox.showerror(
+            "I/O Error",
+            "%s.\nSaving as UTF-8" % failed,
+            parent=self.text)
+        # Fallback: save as UTF-8, with BOM - ignoring the incorrect
+        # declared encoding
+        return chars.encode('utf-8-sig')
+
+    def print_window(self, event):
+        confirm = messagebox.askokcancel(
+                  title="Print",
+                  message="Print to Default Printer",
+                  default=messagebox.OK,
+                  parent=self.text)
+        if not confirm:
+            self.text.focus_set()
+            return "break"
+        tempfilename = None
+        saved = self.get_saved()
+        if saved:
+            filename = self.filename
+        # shell undo is reset after every prompt, looks saved, probably isn't
+        if not saved or filename is None:
+            (tfd, tempfilename) = tempfile.mkstemp(prefix='IDLE_tmp_')
+            filename = tempfilename
+            os.close(tfd)
+            if not self.writefile(tempfilename):
+                os.unlink(tempfilename)
+                return "break"
+        platform = os.name
+        printPlatform = True
+        if platform == 'posix': #posix platform
+            command = idleConf.GetOption('main','General',
+                                         'print-command-posix')
+            command = command + " 2>&1"
+        elif platform == 'nt': #win32 platform
+            command = idleConf.GetOption('main','General','print-command-win')
+        else: #no printing for this platform
+            printPlatform = False
+        if printPlatform:  #we can try to print for this platform
+            command = command % shlex.quote(filename)
+            pipe = os.popen(command, "r")
+            # things can get ugly on NT if there is no printer available.
+            output = pipe.read().strip()
+            status = pipe.close()
+            if status:
+                output = "Printing failed (exit status 0x%x)\n" % \
+                         status + output
+            if output:
+                output = "Printing command: %s\n" % repr(command) + output
+                messagebox.showerror("Print status", output, parent=self.text)
+        else:  #no printing for this platform
+            message = "Printing is not enabled for this platform: %s" % platform
+            messagebox.showinfo("Print status", message, parent=self.text)
+        if tempfilename:
+            os.unlink(tempfilename)
+        return "break"
+
+    opendialog = None
+    savedialog = None
+
+    filetypes = (
+        ("Python files", py_extensions, "TEXT"),
+        ("Text files", "*.txt", "TEXT"),
+        ("All files", "*"),
+        )
+
+    defaultextension = '.py' if sys.platform == 'darwin' else ''
+
+    def askopenfile(self):
+        dir, base = self.defaultfilename("open")
+        if not self.opendialog:
+            self.opendialog = filedialog.Open(parent=self.text,
+                                                filetypes=self.filetypes)
+        filename = self.opendialog.show(initialdir=dir, initialfile=base)
+        return filename
+
+    def defaultfilename(self, mode="open"):
+        if self.filename:
+            return os.path.split(self.filename)
+        elif self.dirname:
+            return self.dirname, ""
+        else:
+            try:
+                pwd = os.getcwd()
+            except OSError:
+                pwd = ""
+            return pwd, ""
+
+    def asksavefile(self):
+        dir, base = self.defaultfilename("save")
+        if not self.savedialog:
+            self.savedialog = filedialog.SaveAs(
+                    parent=self.text,
+                    filetypes=self.filetypes,
+                    defaultextension=self.defaultextension)
+        filename = self.savedialog.show(initialdir=dir, initialfile=base)
+        return filename
+
+    def updaterecentfileslist(self,filename):
+        "Update recent file list on all editor windows"
+        if self.editwin.flist:
+            self.editwin.update_recent_files_list(filename)
+
+
+def _io_binding(parent):  # htest #
+    from tkinter import Toplevel, Text
+
+    top = Toplevel(parent)
+    top.title("Test IOBinding")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+
+    class MyEditWin:
+        def __init__(self, text):
+            self.text = text
+            self.flist = None
+            self.text.bind("<Control-o>", self.open)
+            self.text.bind('<Control-p>', self.print)
+            self.text.bind("<Control-s>", self.save)
+            self.text.bind("<Alt-s>", self.saveas)
+            self.text.bind('<Control-c>', self.savecopy)
+        def get_saved(self): return 0
+        def set_saved(self, flag): pass
+        def reset_undo(self): pass
+        def open(self, event):
+            self.text.event_generate("<<open-window-from-file>>")
+        def print(self, event):
+            self.text.event_generate("<<print-window>>")
+        def save(self, event):
+            self.text.event_generate("<<save-window>>")
+        def saveas(self, event):
+            self.text.event_generate("<<save-window-as-file>>")
+        def savecopy(self, event):
+            self.text.event_generate("<<save-copy-of-window-as-file>>")
+
+    text = Text(top)
+    text.pack()
+    text.focus_set()
+    editwin = MyEditWin(text)
+    IOBinding(editwin)
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_iomenu', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_io_binding)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/macosx.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/macosx.py
new file mode 100644
index 0000000000000000000000000000000000000000..332952f4572cbda94a80e8635ee73e54a63a1834
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/macosx.py
@@ -0,0 +1,278 @@
+"""
+A number of functions that enhance IDLE on macOS.
+"""
+from os.path import expanduser
+import plistlib
+from sys import platform  # Used in _init_tk_type, changed by test.
+
+import tkinter
+
+
+## Define functions that query the Mac graphics type.
+## _tk_type and its initializer are private to this section.
+
+_tk_type = None
+
+def _init_tk_type():
+    """ Initialize _tk_type for isXyzTk functions.
+
+    This function is only called once, when _tk_type is still None.
+    """
+    global _tk_type
+    if platform == 'darwin':
+
+        # When running IDLE, GUI is present, test/* may not be.
+        # When running tests, test/* is present, GUI may not be.
+        # If not, guess most common.  Does not matter for testing.
+        from idlelib.__init__ import testing
+        if testing:
+            from test.support import requires, ResourceDenied
+            try:
+                requires('gui')
+            except ResourceDenied:
+                _tk_type = "cocoa"
+                return
+
+        root = tkinter.Tk()
+        ws = root.tk.call('tk', 'windowingsystem')
+        if 'x11' in ws:
+            _tk_type = "xquartz"
+        elif 'aqua' not in ws:
+            _tk_type = "other"
+        elif 'AppKit' in root.tk.call('winfo', 'server', '.'):
+            _tk_type = "cocoa"
+        else:
+            _tk_type = "carbon"
+        root.destroy()
+    else:
+        _tk_type = "other"
+    return
+
+def isAquaTk():
+    """
+    Returns True if IDLE is using a native OS X Tk (Cocoa or Carbon).
+    """
+    if not _tk_type:
+        _init_tk_type()
+    return _tk_type == "cocoa" or _tk_type == "carbon"
+
+def isCarbonTk():
+    """
+    Returns True if IDLE is using a Carbon Aqua Tk (instead of the
+    newer Cocoa Aqua Tk).
+    """
+    if not _tk_type:
+        _init_tk_type()
+    return _tk_type == "carbon"
+
+def isCocoaTk():
+    """
+    Returns True if IDLE is using a Cocoa Aqua Tk.
+    """
+    if not _tk_type:
+        _init_tk_type()
+    return _tk_type == "cocoa"
+
+def isXQuartz():
+    """
+    Returns True if IDLE is using an OS X X11 Tk.
+    """
+    if not _tk_type:
+        _init_tk_type()
+    return _tk_type == "xquartz"
+
+
+def readSystemPreferences():
+    """
+    Fetch the macOS system preferences.
+    """
+    if platform != 'darwin':
+        return None
+
+    plist_path = expanduser('~/Library/Preferences/.GlobalPreferences.plist')
+    try:
+        with open(plist_path, 'rb') as plist_file:
+            return plistlib.load(plist_file)
+    except OSError:
+        return None
+
+
+def preferTabsPreferenceWarning():
+    """
+    Warn if "Prefer tabs when opening documents" is set to "Always".
+    """
+    if platform != 'darwin':
+        return None
+
+    prefs = readSystemPreferences()
+    if prefs and prefs.get('AppleWindowTabbingMode') == 'always':
+        return (
+            'WARNING: The system preference "Prefer tabs when opening'
+            ' documents" is set to "Always". This will cause various problems'
+            ' with IDLE. For the best experience, change this setting when'
+            ' running IDLE (via System Preferences -> Dock).'
+        )
+    return None
+
+
+## Fix the menu and related functions.
+
+def addOpenEventSupport(root, flist):
+    """
+    This ensures that the application will respond to open AppleEvents, which
+    makes is feasible to use IDLE as the default application for python files.
+    """
+    def doOpenFile(*args):
+        for fn in args:
+            flist.open(fn)
+
+    # The command below is a hook in aquatk that is called whenever the app
+    # receives a file open event. The callback can have multiple arguments,
+    # one for every file that should be opened.
+    root.createcommand("::tk::mac::OpenDocument", doOpenFile)
+
+def hideTkConsole(root):
+    try:
+        root.tk.call('console', 'hide')
+    except tkinter.TclError:
+        # Some versions of the Tk framework don't have a console object
+        pass
+
+def overrideRootMenu(root, flist):
+    """
+    Replace the Tk root menu by something that is more appropriate for
+    IDLE with an Aqua Tk.
+    """
+    # The menu that is attached to the Tk root (".") is also used by AquaTk for
+    # all windows that don't specify a menu of their own. The default menubar
+    # contains a number of menus, none of which are appropriate for IDLE. The
+    # Most annoying of those is an 'About Tck/Tk...' menu in the application
+    # menu.
+    #
+    # This function replaces the default menubar by a mostly empty one, it
+    # should only contain the correct application menu and the window menu.
+    #
+    # Due to a (mis-)feature of TkAqua the user will also see an empty Help
+    # menu.
+    from tkinter import Menu
+    from idlelib import mainmenu
+    from idlelib import window
+
+    closeItem = mainmenu.menudefs[0][1][-2]
+
+    # Remove the last 3 items of the file menu: a separator, close window and
+    # quit. Close window will be reinserted just above the save item, where
+    # it should be according to the HIG. Quit is in the application menu.
+    del mainmenu.menudefs[0][1][-3:]
+    mainmenu.menudefs[0][1].insert(6, closeItem)
+
+    # Remove the 'About' entry from the help menu, it is in the application
+    # menu
+    del mainmenu.menudefs[-1][1][0:2]
+    # Remove the 'Configure Idle' entry from the options menu, it is in the
+    # application menu as 'Preferences'
+    del mainmenu.menudefs[-3][1][0:2]
+    menubar = Menu(root)
+    root.configure(menu=menubar)
+
+    menu = Menu(menubar, name='window', tearoff=0)
+    menubar.add_cascade(label='Window', menu=menu, underline=0)
+
+    def postwindowsmenu(menu=menu):
+        end = menu.index('end')
+        if end is None:
+            end = -1
+
+        if end > 0:
+            menu.delete(0, end)
+        window.add_windows_to_menu(menu)
+    window.register_callback(postwindowsmenu)
+
+    def about_dialog(event=None):
+        "Handle Help 'About IDLE' event."
+        # Synchronize with editor.EditorWindow.about_dialog.
+        from idlelib import help_about
+        help_about.AboutDialog(root)
+
+    def config_dialog(event=None):
+        "Handle Options 'Configure IDLE' event."
+        # Synchronize with editor.EditorWindow.config_dialog.
+        from idlelib import configdialog
+
+        # Ensure that the root object has an instance_dict attribute,
+        # mirrors code in EditorWindow (although that sets the attribute
+        # on an EditorWindow instance that is then passed as the first
+        # argument to ConfigDialog)
+        root.instance_dict = flist.inversedict
+        configdialog.ConfigDialog(root, 'Settings')
+
+    def help_dialog(event=None):
+        "Handle Help 'IDLE Help' event."
+        # Synchronize with editor.EditorWindow.help_dialog.
+        from idlelib import help
+        help.show_idlehelp(root)
+
+    root.bind('<<about-idle>>', about_dialog)
+    root.bind('<<open-config-dialog>>', config_dialog)
+    root.createcommand('::tk::mac::ShowPreferences', config_dialog)
+    if flist:
+        root.bind('<<close-all-windows>>', flist.close_all_callback)
+
+        # The binding above doesn't reliably work on all versions of Tk
+        # on macOS. Adding command definition below does seem to do the
+        # right thing for now.
+        root.createcommand('::tk::mac::Quit', flist.close_all_callback)
+
+    if isCarbonTk():
+        # for Carbon AquaTk, replace the default Tk apple menu
+        menu = Menu(menubar, name='apple', tearoff=0)
+        menubar.add_cascade(label='IDLE', menu=menu)
+        mainmenu.menudefs.insert(0,
+            ('application', [
+                ('About IDLE', '<<about-idle>>'),
+                    None,
+                ]))
+    if isCocoaTk():
+        # replace default About dialog with About IDLE one
+        root.createcommand('tkAboutDialog', about_dialog)
+        # replace default "Help" item in Help menu
+        root.createcommand('::tk::mac::ShowHelp', help_dialog)
+        # remove redundant "IDLE Help" from menu
+        del mainmenu.menudefs[-1][1][0]
+
+def fixb2context(root):
+    '''Removed bad AquaTk Button-2 (right) and Paste bindings.
+
+    They prevent context menu access and seem to be gone in AquaTk8.6.
+    See issue #24801.
+    '''
+    root.unbind_class('Text', '<B2>')
+    root.unbind_class('Text', '<B2-Motion>')
+    root.unbind_class('Text', '<<PasteSelection>>')
+
+def setupApp(root, flist):
+    """
+    Perform initial OS X customizations if needed.
+    Called from pyshell.main() after initial calls to Tk()
+
+    There are currently three major versions of Tk in use on OS X:
+        1. Aqua Cocoa Tk (native default since OS X 10.6)
+        2. Aqua Carbon Tk (original native, 32-bit only, deprecated)
+        3. X11 (supported by some third-party distributors, deprecated)
+    There are various differences among the three that affect IDLE
+    behavior, primarily with menus, mouse key events, and accelerators.
+    Some one-time customizations are performed here.
+    Others are dynamically tested throughout idlelib by calls to the
+    isAquaTk(), isCarbonTk(), isCocoaTk(), isXQuartz() functions which
+    are initialized here as well.
+    """
+    if isAquaTk():
+        hideTkConsole(root)
+        overrideRootMenu(root, flist)
+        addOpenEventSupport(root, flist)
+        fixb2context(root)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_macosx', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/mainmenu.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/mainmenu.py
new file mode 100644
index 0000000000000000000000000000000000000000..91a32cebb513f9140bf5e8df709e90b9e1c996e8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/mainmenu.py
@@ -0,0 +1,126 @@
+"""Define the menu contents, hotkeys, and event bindings.
+
+There is additional configuration information in the EditorWindow class (and
+subclasses): the menus are created there based on the menu_specs (class)
+variable, and menus not created are silently skipped in the code here.  This
+makes it possible, for example, to define a Debug menu which is only present in
+the PythonShell window, and a Format menu which is only present in the Editor
+windows.
+
+"""
+from importlib.util import find_spec
+
+from idlelib.config import idleConf
+
+#   Warning: menudefs is altered in macosx.overrideRootMenu()
+#   after it is determined that an OS X Aqua Tk is in use,
+#   which cannot be done until after Tk() is first called.
+#   Do not alter the 'file', 'options', or 'help' cascades here
+#   without altering overrideRootMenu() as well.
+#       TODO: Make this more robust
+
+menudefs = [
+ # underscore prefixes character to underscore
+ ('file', [
+   ('_New File', '<<open-new-window>>'),
+   ('_Open...', '<<open-window-from-file>>'),
+   ('Open _Module...', '<<open-module>>'),
+   ('Module _Browser', '<<open-class-browser>>'),
+   ('_Path Browser', '<<open-path-browser>>'),
+   None,
+   ('_Save', '<<save-window>>'),
+   ('Save _As...', '<<save-window-as-file>>'),
+   ('Save Cop_y As...', '<<save-copy-of-window-as-file>>'),
+   None,
+   ('Prin_t Window', '<<print-window>>'),
+   None,
+   ('_Close Window', '<<close-window>>'),
+   ('E_xit IDLE', '<<close-all-windows>>'),
+   ]),
+
+ ('edit', [
+   ('_Undo', '<<undo>>'),
+   ('_Redo', '<<redo>>'),
+   None,
+   ('Select _All', '<<select-all>>'),
+   ('Cu_t', '<<cut>>'),
+   ('_Copy', '<<copy>>'),
+   ('_Paste', '<<paste>>'),
+   None,
+   ('_Find...', '<<find>>'),
+   ('Find A_gain', '<<find-again>>'),
+   ('Find _Selection', '<<find-selection>>'),
+   ('Find in Files...', '<<find-in-files>>'),
+   ('R_eplace...', '<<replace>>'),
+   None,
+   ('Go to _Line', '<<goto-line>>'),
+   ('S_how Completions', '<<force-open-completions>>'),
+   ('E_xpand Word', '<<expand-word>>'),
+   ('Show C_all Tip', '<<force-open-calltip>>'),
+   ('Show Surrounding P_arens', '<<flash-paren>>'),
+   ]),
+
+ ('format', [
+   ('F_ormat Paragraph', '<<format-paragraph>>'),
+   ('_Indent Region', '<<indent-region>>'),
+   ('_Dedent Region', '<<dedent-region>>'),
+   ('Comment _Out Region', '<<comment-region>>'),
+   ('U_ncomment Region', '<<uncomment-region>>'),
+   ('Tabify Region', '<<tabify-region>>'),
+   ('Untabify Region', '<<untabify-region>>'),
+   ('Toggle Tabs', '<<toggle-tabs>>'),
+   ('New Indent Width', '<<change-indentwidth>>'),
+   ('S_trip Trailing Whitespace', '<<do-rstrip>>'),
+   ]),
+
+ ('run', [
+   ('R_un Module', '<<run-module>>'),
+   ('Run... _Customized', '<<run-custom>>'),
+   ('C_heck Module', '<<check-module>>'),
+   ('Python Shell', '<<open-python-shell>>'),
+   ]),
+
+ ('shell', [
+   ('_View Last Restart', '<<view-restart>>'),
+   ('_Restart Shell', '<<restart-shell>>'),
+   None,
+   ('_Previous History', '<<history-previous>>'),
+   ('_Next History', '<<history-next>>'),
+   None,
+   ('_Interrupt Execution', '<<interrupt-execution>>'),
+   ]),
+
+ ('debug', [
+   ('_Go to File/Line', '<<goto-file-line>>'),
+   ('!_Debugger', '<<toggle-debugger>>'),
+   ('_Stack Viewer', '<<open-stack-viewer>>'),
+   ('!_Auto-open Stack Viewer', '<<toggle-jit-stack-viewer>>'),
+   ]),
+
+ ('options', [
+   ('Configure _IDLE', '<<open-config-dialog>>'),
+   None,
+   ('Show _Code Context', '<<toggle-code-context>>'),
+   ('Show _Line Numbers', '<<toggle-line-numbers>>'),
+   ('_Zoom Height', '<<zoom-height>>'),
+   ]),
+
+ ('window', [
+   ]),
+
+ ('help', [
+   ('_About IDLE', '<<about-idle>>'),
+   None,
+   ('_IDLE Doc', '<<help>>'),
+   ('Python _Docs', '<<python-docs>>'),
+   ]),
+]
+
+if find_spec('turtledemo'):
+    menudefs[-1][1].append(('Turtle Demo', '<<open-turtle-demo>>'))
+
+default_keydefs = idleConf.GetCurrentKeySet()
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_mainmenu', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/multicall.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/multicall.py
new file mode 100644
index 0000000000000000000000000000000000000000..41f81813113062167b813f1400aff15ad140afc3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/multicall.py
@@ -0,0 +1,451 @@
+"""
+MultiCall - a class which inherits its methods from a Tkinter widget (Text, for
+example), but enables multiple calls of functions per virtual event - all
+matching events will be called, not only the most specific one. This is done
+by wrapping the event functions - event_add, event_delete and event_info.
+MultiCall recognizes only a subset of legal event sequences. Sequences which
+are not recognized are treated by the original Tk handling mechanism. A
+more-specific event will be called before a less-specific event.
+
+The recognized sequences are complete one-event sequences (no emacs-style
+Ctrl-X Ctrl-C, no shortcuts like <3>), for all types of events.
+Key/Button Press/Release events can have modifiers.
+The recognized modifiers are Shift, Control, Option and Command for Mac, and
+Control, Alt, Shift, Meta/M for other platforms.
+
+For all events which were handled by MultiCall, a new member is added to the
+event instance passed to the binded functions - mc_type. This is one of the
+event type constants defined in this module (such as MC_KEYPRESS).
+For Key/Button events (which are handled by MultiCall and may receive
+modifiers), another member is added - mc_state. This member gives the state
+of the recognized modifiers, as a combination of the modifier constants
+also defined in this module (for example, MC_SHIFT).
+Using these members is absolutely portable.
+
+The order by which events are called is defined by these rules:
+1. A more-specific event will be called before a less-specific event.
+2. A recently-binded event will be called before a previously-binded event,
+   unless this conflicts with the first rule.
+Each function will be called at most once for each event.
+"""
+import re
+import sys
+
+import tkinter
+
+# the event type constants, which define the meaning of mc_type
+MC_KEYPRESS=0; MC_KEYRELEASE=1; MC_BUTTONPRESS=2; MC_BUTTONRELEASE=3;
+MC_ACTIVATE=4; MC_CIRCULATE=5; MC_COLORMAP=6; MC_CONFIGURE=7;
+MC_DEACTIVATE=8; MC_DESTROY=9; MC_ENTER=10; MC_EXPOSE=11; MC_FOCUSIN=12;
+MC_FOCUSOUT=13; MC_GRAVITY=14; MC_LEAVE=15; MC_MAP=16; MC_MOTION=17;
+MC_MOUSEWHEEL=18; MC_PROPERTY=19; MC_REPARENT=20; MC_UNMAP=21; MC_VISIBILITY=22;
+# the modifier state constants, which define the meaning of mc_state
+MC_SHIFT = 1<<0; MC_CONTROL = 1<<2; MC_ALT = 1<<3; MC_META = 1<<5
+MC_OPTION = 1<<6; MC_COMMAND = 1<<7
+
+# define the list of modifiers, to be used in complex event types.
+if sys.platform == "darwin":
+    _modifiers = (("Shift",), ("Control",), ("Option",), ("Command",))
+    _modifier_masks = (MC_SHIFT, MC_CONTROL, MC_OPTION, MC_COMMAND)
+else:
+    _modifiers = (("Control",), ("Alt",), ("Shift",), ("Meta", "M"))
+    _modifier_masks = (MC_CONTROL, MC_ALT, MC_SHIFT, MC_META)
+
+# a dictionary to map a modifier name into its number
+_modifier_names = {name: number
+                         for number in range(len(_modifiers))
+                         for name in _modifiers[number]}
+
+# In 3.4, if no shell window is ever open, the underlying Tk widget is
+# destroyed before .__del__ methods here are called.  The following
+# is used to selectively ignore shutdown exceptions to avoid
+# 'Exception ignored' messages.  See http://bugs.python.org/issue20167
+APPLICATION_GONE = "application has been destroyed"
+
+# A binder is a class which binds functions to one type of event. It has two
+# methods: bind and unbind, which get a function and a parsed sequence, as
+# returned by _parse_sequence(). There are two types of binders:
+# _SimpleBinder handles event types with no modifiers and no detail.
+# No Python functions are called when no events are binded.
+# _ComplexBinder handles event types with modifiers and a detail.
+# A Python function is called each time an event is generated.
+
+class _SimpleBinder:
+    def __init__(self, type, widget, widgetinst):
+        self.type = type
+        self.sequence = '<'+_types[type][0]+'>'
+        self.widget = widget
+        self.widgetinst = widgetinst
+        self.bindedfuncs = []
+        self.handlerid = None
+
+    def bind(self, triplet, func):
+        if not self.handlerid:
+            def handler(event, l = self.bindedfuncs, mc_type = self.type):
+                event.mc_type = mc_type
+                wascalled = {}
+                for i in range(len(l)-1, -1, -1):
+                    func = l[i]
+                    if func not in wascalled:
+                        wascalled[func] = True
+                        r = func(event)
+                        if r:
+                            return r
+            self.handlerid = self.widget.bind(self.widgetinst,
+                                              self.sequence, handler)
+        self.bindedfuncs.append(func)
+
+    def unbind(self, triplet, func):
+        self.bindedfuncs.remove(func)
+        if not self.bindedfuncs:
+            self.widget.unbind(self.widgetinst, self.sequence, self.handlerid)
+            self.handlerid = None
+
+    def __del__(self):
+        if self.handlerid:
+            try:
+                self.widget.unbind(self.widgetinst, self.sequence,
+                        self.handlerid)
+            except tkinter.TclError as e:
+                if not APPLICATION_GONE in e.args[0]:
+                    raise
+
+# An int in range(1 << len(_modifiers)) represents a combination of modifiers
+# (if the least significant bit is on, _modifiers[0] is on, and so on).
+# _state_subsets gives for each combination of modifiers, or *state*,
+# a list of the states which are a subset of it. This list is ordered by the
+# number of modifiers is the state - the most specific state comes first.
+_states = range(1 << len(_modifiers))
+_state_names = [''.join(m[0]+'-'
+                        for i, m in enumerate(_modifiers)
+                        if (1 << i) & s)
+                for s in _states]
+
+def expand_substates(states):
+    '''For each item of states return a list containing all combinations of
+    that item with individual bits reset, sorted by the number of set bits.
+    '''
+    def nbits(n):
+        "number of bits set in n base 2"
+        nb = 0
+        while n:
+            n, rem = divmod(n, 2)
+            nb += rem
+        return nb
+    statelist = []
+    for state in states:
+        substates = list({state & x for x in states})
+        substates.sort(key=nbits, reverse=True)
+        statelist.append(substates)
+    return statelist
+
+_state_subsets = expand_substates(_states)
+
+# _state_codes gives for each state, the portable code to be passed as mc_state
+_state_codes = []
+for s in _states:
+    r = 0
+    for i in range(len(_modifiers)):
+        if (1 << i) & s:
+            r |= _modifier_masks[i]
+    _state_codes.append(r)
+
+class _ComplexBinder:
+    # This class binds many functions, and only unbinds them when it is deleted.
+    # self.handlerids is the list of seqs and ids of binded handler functions.
+    # The binded functions sit in a dictionary of lists of lists, which maps
+    # a detail (or None) and a state into a list of functions.
+    # When a new detail is discovered, handlers for all the possible states
+    # are binded.
+
+    def __create_handler(self, lists, mc_type, mc_state):
+        def handler(event, lists = lists,
+                    mc_type = mc_type, mc_state = mc_state,
+                    ishandlerrunning = self.ishandlerrunning,
+                    doafterhandler = self.doafterhandler):
+            ishandlerrunning[:] = [True]
+            event.mc_type = mc_type
+            event.mc_state = mc_state
+            wascalled = {}
+            r = None
+            for l in lists:
+                for i in range(len(l)-1, -1, -1):
+                    func = l[i]
+                    if func not in wascalled:
+                        wascalled[func] = True
+                        r = l[i](event)
+                        if r:
+                            break
+                if r:
+                    break
+            ishandlerrunning[:] = []
+            # Call all functions in doafterhandler and remove them from list
+            for f in doafterhandler:
+                f()
+            doafterhandler[:] = []
+            if r:
+                return r
+        return handler
+
+    def __init__(self, type, widget, widgetinst):
+        self.type = type
+        self.typename = _types[type][0]
+        self.widget = widget
+        self.widgetinst = widgetinst
+        self.bindedfuncs = {None: [[] for s in _states]}
+        self.handlerids = []
+        # we don't want to change the lists of functions while a handler is
+        # running - it will mess up the loop and anyway, we usually want the
+        # change to happen from the next event. So we have a list of functions
+        # for the handler to run after it finishes calling the binded functions.
+        # It calls them only once.
+        # ishandlerrunning is a list. An empty one means no, otherwise - yes.
+        # this is done so that it would be mutable.
+        self.ishandlerrunning = []
+        self.doafterhandler = []
+        for s in _states:
+            lists = [self.bindedfuncs[None][i] for i in _state_subsets[s]]
+            handler = self.__create_handler(lists, type, _state_codes[s])
+            seq = '<'+_state_names[s]+self.typename+'>'
+            self.handlerids.append((seq, self.widget.bind(self.widgetinst,
+                                                          seq, handler)))
+
+    def bind(self, triplet, func):
+        if triplet[2] not in self.bindedfuncs:
+            self.bindedfuncs[triplet[2]] = [[] for s in _states]
+            for s in _states:
+                lists = [ self.bindedfuncs[detail][i]
+                          for detail in (triplet[2], None)
+                          for i in _state_subsets[s]       ]
+                handler = self.__create_handler(lists, self.type,
+                                                _state_codes[s])
+                seq = "<%s%s-%s>"% (_state_names[s], self.typename, triplet[2])
+                self.handlerids.append((seq, self.widget.bind(self.widgetinst,
+                                                              seq, handler)))
+        doit = lambda: self.bindedfuncs[triplet[2]][triplet[0]].append(func)
+        if not self.ishandlerrunning:
+            doit()
+        else:
+            self.doafterhandler.append(doit)
+
+    def unbind(self, triplet, func):
+        doit = lambda: self.bindedfuncs[triplet[2]][triplet[0]].remove(func)
+        if not self.ishandlerrunning:
+            doit()
+        else:
+            self.doafterhandler.append(doit)
+
+    def __del__(self):
+        for seq, id in self.handlerids:
+            try:
+                self.widget.unbind(self.widgetinst, seq, id)
+            except tkinter.TclError as e:
+                if not APPLICATION_GONE in e.args[0]:
+                    raise
+
+# define the list of event types to be handled by MultiEvent. the order is
+# compatible with the definition of event type constants.
+_types = (
+    ("KeyPress", "Key"), ("KeyRelease",), ("ButtonPress", "Button"),
+    ("ButtonRelease",), ("Activate",), ("Circulate",), ("Colormap",),
+    ("Configure",), ("Deactivate",), ("Destroy",), ("Enter",), ("Expose",),
+    ("FocusIn",), ("FocusOut",), ("Gravity",), ("Leave",), ("Map",),
+    ("Motion",), ("MouseWheel",), ("Property",), ("Reparent",), ("Unmap",),
+    ("Visibility",),
+)
+
+# which binder should be used for every event type?
+_binder_classes = (_ComplexBinder,) * 4 + (_SimpleBinder,) * (len(_types)-4)
+
+# A dictionary to map a type name into its number
+_type_names = {name: number
+                     for number in range(len(_types))
+                     for name in _types[number]}
+
+_keysym_re = re.compile(r"^\w+$")
+_button_re = re.compile(r"^[1-5]$")
+def _parse_sequence(sequence):
+    """Get a string which should describe an event sequence. If it is
+    successfully parsed as one, return a tuple containing the state (as an int),
+    the event type (as an index of _types), and the detail - None if none, or a
+    string if there is one. If the parsing is unsuccessful, return None.
+    """
+    if not sequence or sequence[0] != '<' or sequence[-1] != '>':
+        return None
+    words = sequence[1:-1].split('-')
+    modifiers = 0
+    while words and words[0] in _modifier_names:
+        modifiers |= 1 << _modifier_names[words[0]]
+        del words[0]
+    if words and words[0] in _type_names:
+        type = _type_names[words[0]]
+        del words[0]
+    else:
+        return None
+    if _binder_classes[type] is _SimpleBinder:
+        if modifiers or words:
+            return None
+        else:
+            detail = None
+    else:
+        # _ComplexBinder
+        if type in [_type_names[s] for s in ("KeyPress", "KeyRelease")]:
+            type_re = _keysym_re
+        else:
+            type_re = _button_re
+
+        if not words:
+            detail = None
+        elif len(words) == 1 and type_re.match(words[0]):
+            detail = words[0]
+        else:
+            return None
+
+    return modifiers, type, detail
+
+def _triplet_to_sequence(triplet):
+    if triplet[2]:
+        return '<'+_state_names[triplet[0]]+_types[triplet[1]][0]+'-'+ \
+               triplet[2]+'>'
+    else:
+        return '<'+_state_names[triplet[0]]+_types[triplet[1]][0]+'>'
+
+_multicall_dict = {}
+def MultiCallCreator(widget):
+    """Return a MultiCall class which inherits its methods from the
+    given widget class (for example, Tkinter.Text). This is used
+    instead of a templating mechanism.
+    """
+    if widget in _multicall_dict:
+        return _multicall_dict[widget]
+
+    class MultiCall (widget):
+        assert issubclass(widget, tkinter.Misc)
+
+        def __init__(self, *args, **kwargs):
+            widget.__init__(self, *args, **kwargs)
+            # a dictionary which maps a virtual event to a tuple with:
+            #  0. the function binded
+            #  1. a list of triplets - the sequences it is binded to
+            self.__eventinfo = {}
+            self.__binders = [_binder_classes[i](i, widget, self)
+                              for i in range(len(_types))]
+
+        def bind(self, sequence=None, func=None, add=None):
+            #print("bind(%s, %s, %s)" % (sequence, func, add),
+            #      file=sys.__stderr__)
+            if type(sequence) is str and len(sequence) > 2 and \
+               sequence[:2] == "<<" and sequence[-2:] == ">>":
+                if sequence in self.__eventinfo:
+                    ei = self.__eventinfo[sequence]
+                    if ei[0] is not None:
+                        for triplet in ei[1]:
+                            self.__binders[triplet[1]].unbind(triplet, ei[0])
+                    ei[0] = func
+                    if ei[0] is not None:
+                        for triplet in ei[1]:
+                            self.__binders[triplet[1]].bind(triplet, func)
+                else:
+                    self.__eventinfo[sequence] = [func, []]
+            return widget.bind(self, sequence, func, add)
+
+        def unbind(self, sequence, funcid=None):
+            if type(sequence) is str and len(sequence) > 2 and \
+               sequence[:2] == "<<" and sequence[-2:] == ">>" and \
+               sequence in self.__eventinfo:
+                func, triplets = self.__eventinfo[sequence]
+                if func is not None:
+                    for triplet in triplets:
+                        self.__binders[triplet[1]].unbind(triplet, func)
+                    self.__eventinfo[sequence][0] = None
+            return widget.unbind(self, sequence, funcid)
+
+        def event_add(self, virtual, *sequences):
+            #print("event_add(%s, %s)" % (repr(virtual), repr(sequences)),
+            #      file=sys.__stderr__)
+            if virtual not in self.__eventinfo:
+                self.__eventinfo[virtual] = [None, []]
+
+            func, triplets = self.__eventinfo[virtual]
+            for seq in sequences:
+                triplet = _parse_sequence(seq)
+                if triplet is None:
+                    #print("Tkinter event_add(%s)" % seq, file=sys.__stderr__)
+                    widget.event_add(self, virtual, seq)
+                else:
+                    if func is not None:
+                        self.__binders[triplet[1]].bind(triplet, func)
+                    triplets.append(triplet)
+
+        def event_delete(self, virtual, *sequences):
+            if virtual not in self.__eventinfo:
+                return
+            func, triplets = self.__eventinfo[virtual]
+            for seq in sequences:
+                triplet = _parse_sequence(seq)
+                if triplet is None:
+                    #print("Tkinter event_delete: %s" % seq, file=sys.__stderr__)
+                    widget.event_delete(self, virtual, seq)
+                else:
+                    if func is not None:
+                        self.__binders[triplet[1]].unbind(triplet, func)
+                    triplets.remove(triplet)
+
+        def event_info(self, virtual=None):
+            if virtual is None or virtual not in self.__eventinfo:
+                return widget.event_info(self, virtual)
+            else:
+                return tuple(map(_triplet_to_sequence,
+                                 self.__eventinfo[virtual][1])) + \
+                       widget.event_info(self, virtual)
+
+        def __del__(self):
+            for virtual in self.__eventinfo:
+                func, triplets = self.__eventinfo[virtual]
+                if func:
+                    for triplet in triplets:
+                        try:
+                            self.__binders[triplet[1]].unbind(triplet, func)
+                        except tkinter.TclError as e:
+                            if not APPLICATION_GONE in e.args[0]:
+                                raise
+
+    _multicall_dict[widget] = MultiCall
+    return MultiCall
+
+
+def _multi_call(parent):  # htest #
+    top = tkinter.Toplevel(parent)
+    top.title("Test MultiCall")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+    text = MultiCallCreator(tkinter.Text)(top)
+    text.pack()
+    text.focus_set()
+
+    def bindseq(seq, n=[0]):
+        def handler(event):
+            print(seq)
+        text.bind("<<handler%d>>"%n[0], handler)
+        text.event_add("<<handler%d>>"%n[0], seq)
+        n[0] += 1
+    bindseq("<Key>")
+    bindseq("<Control-Key>")
+    bindseq("<Alt-Key-a>")
+    bindseq("<Control-Key-a>")
+    bindseq("<Alt-Control-Key-a>")
+    bindseq("<Key-b>")
+    bindseq("<Control-Button-1>")
+    bindseq("<Button-2>")
+    bindseq("<Alt-Button-1>")
+    bindseq("<FocusOut>")
+    bindseq("<Enter>")
+    bindseq("<Leave>")
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_mainmenu', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_multi_call)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/outwin.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/outwin.py
new file mode 100644
index 0000000000000000000000000000000000000000..8baa657550de948ab5ef215af3d1e21b24f936c0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/outwin.py
@@ -0,0 +1,188 @@
+"""Editor window that can serve as an output file.
+"""
+
+import re
+
+from tkinter import messagebox
+
+from idlelib.editor import EditorWindow
+
+
+file_line_pats = [
+    # order of patterns matters
+    r'file "([^"]*)", line (\d+)',
+    r'([^\s]+)\((\d+)\)',
+    r'^(\s*\S.*?):\s*(\d+):',  # Win filename, maybe starting with spaces
+    r'([^\s]+):\s*(\d+):',     # filename or path, ltrim
+    r'^\s*(\S.*?):\s*(\d+):',  # Win abs path with embedded spaces, ltrim
+]
+
+file_line_progs = None
+
+
+def compile_progs():
+    "Compile the patterns for matching to file name and line number."
+    global file_line_progs
+    file_line_progs = [re.compile(pat, re.IGNORECASE)
+                       for pat in file_line_pats]
+
+
+def file_line_helper(line):
+    """Extract file name and line number from line of text.
+
+    Check if line of text contains one of the file/line patterns.
+    If it does and if the file and line are valid, return
+    a tuple of the file name and line number.  If it doesn't match
+    or if the file or line is invalid, return None.
+    """
+    if not file_line_progs:
+        compile_progs()
+    for prog in file_line_progs:
+        match = prog.search(line)
+        if match:
+            filename, lineno = match.group(1, 2)
+            try:
+                f = open(filename)
+                f.close()
+                break
+            except OSError:
+                continue
+    else:
+        return None
+    try:
+        return filename, int(lineno)
+    except TypeError:
+        return None
+
+
+class OutputWindow(EditorWindow):
+    """An editor window that can serve as an output file.
+
+    Also the future base class for the Python shell window.
+    This class has no input facilities.
+
+    Adds binding to open a file at a line to the text widget.
+    """
+
+    # Our own right-button menu
+    rmenu_specs = [
+        ("Cut", "<<cut>>", "rmenu_check_cut"),
+        ("Copy", "<<copy>>", "rmenu_check_copy"),
+        ("Paste", "<<paste>>", "rmenu_check_paste"),
+        (None, None, None),
+        ("Go to file/line", "<<goto-file-line>>", None),
+    ]
+
+    allow_code_context = False
+
+    def __init__(self, *args):
+        EditorWindow.__init__(self, *args)
+        self.text.bind("<<goto-file-line>>", self.goto_file_line)
+
+    # Customize EditorWindow
+    def ispythonsource(self, filename):
+        "Python source is only part of output: do not colorize."
+        return False
+
+    def short_title(self):
+        "Customize EditorWindow title."
+        return "Output"
+
+    def maybesave(self):
+        "Customize EditorWindow to not display save file messagebox."
+        return 'yes' if self.get_saved() else 'no'
+
+    # Act as output file
+    def write(self, s, tags=(), mark="insert"):
+        """Write text to text widget.
+
+        The text is inserted at the given index with the provided
+        tags.  The text widget is then scrolled to make it visible
+        and updated to display it, giving the effect of seeing each
+        line as it is added.
+
+        Args:
+            s: Text to insert into text widget.
+            tags: Tuple of tag strings to apply on the insert.
+            mark: Index for the insert.
+
+        Return:
+            Length of text inserted.
+        """
+        assert isinstance(s, str)
+        self.text.insert(mark, s, tags)
+        self.text.see(mark)
+        self.text.update()
+        return len(s)
+
+    def writelines(self, lines):
+        "Write each item in lines iterable."
+        for line in lines:
+            self.write(line)
+
+    def flush(self):
+        "No flushing needed as write() directly writes to widget."
+        pass
+
+    def showerror(self, *args, **kwargs):
+        messagebox.showerror(*args, **kwargs)
+
+    def goto_file_line(self, event=None):
+        """Handle request to open file/line.
+
+        If the selected or previous line in the output window
+        contains a file name and line number, then open that file
+        name in a new window and position on the line number.
+
+        Otherwise, display an error messagebox.
+        """
+        line = self.text.get("insert linestart", "insert lineend")
+        result = file_line_helper(line)
+        if not result:
+            # Try the previous line.  This is handy e.g. in tracebacks,
+            # where you tend to right-click on the displayed source line
+            line = self.text.get("insert -1line linestart",
+                                 "insert -1line lineend")
+            result = file_line_helper(line)
+            if not result:
+                self.showerror(
+                    "No special line",
+                    "The line you point at doesn't look like "
+                    "a valid file name followed by a line number.",
+                    parent=self.text)
+                return
+        filename, lineno = result
+        self.flist.gotofileline(filename, lineno)
+
+
+# These classes are currently not used but might come in handy
+class OnDemandOutputWindow:
+
+    tagdefs = {
+        # XXX Should use IdlePrefs.ColorPrefs
+        "stdout":  {"foreground": "blue"},
+        "stderr":  {"foreground": "#007700"},
+    }
+
+    def __init__(self, flist):
+        self.flist = flist
+        self.owin = None
+
+    def write(self, s, tags, mark):
+        if not self.owin:
+            self.setup()
+        self.owin.write(s, tags, mark)
+
+    def setup(self):
+        self.owin = owin = OutputWindow(self.flist)
+        text = owin.text
+        for tag, cnf in self.tagdefs.items():
+            if cnf:
+                text.tag_configure(tag, **cnf)
+        text.tag_raise('sel')
+        self.write = self.owin.write
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_outwin', verbosity=2, exit=False)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/parenmatch.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/parenmatch.py
new file mode 100644
index 0000000000000000000000000000000000000000..3fd7aadb2aea84f10921a321941990cd57ebb6e9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/parenmatch.py
@@ -0,0 +1,183 @@
+"""ParenMatch -- for parenthesis matching.
+
+When you hit a right paren, the cursor should move briefly to the left
+paren.  Paren here is used generically; the matching applies to
+parentheses, square brackets, and curly braces.
+"""
+from idlelib.hyperparser import HyperParser
+from idlelib.config import idleConf
+
+_openers = {')':'(',']':'[','}':'{'}
+CHECK_DELAY = 100 # milliseconds
+
+class ParenMatch:
+    """Highlight matching openers and closers, (), [], and {}.
+
+    There are three supported styles of paren matching.  When a right
+    paren (opener) is typed:
+
+    opener -- highlight the matching left paren (closer);
+    parens -- highlight the left and right parens (opener and closer);
+    expression -- highlight the entire expression from opener to closer.
+    (For back compatibility, 'default' is a synonym for 'opener').
+
+    Flash-delay is the maximum milliseconds the highlighting remains.
+    Any cursor movement (key press or click) before that removes the
+    highlight.  If flash-delay is 0, there is no maximum.
+
+    TODO:
+    - Augment bell() with mismatch warning in status window.
+    - Highlight when cursor is moved to the right of a closer.
+      This might be too expensive to check.
+    """
+
+    RESTORE_VIRTUAL_EVENT_NAME = "<<parenmatch-check-restore>>"
+    # We want the restore event be called before the usual return and
+    # backspace events.
+    RESTORE_SEQUENCES = ("<KeyPress>", "<ButtonPress>",
+                         "<Key-Return>", "<Key-BackSpace>")
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+        self.text = editwin.text
+        # Bind the check-restore event to the function restore_event,
+        # so that we can then use activate_restore (which calls event_add)
+        # and deactivate_restore (which calls event_delete).
+        editwin.text.bind(self.RESTORE_VIRTUAL_EVENT_NAME,
+                          self.restore_event)
+        self.counter = 0
+        self.is_restore_active = 0
+
+    @classmethod
+    def reload(cls):
+        cls.STYLE = idleConf.GetOption(
+            'extensions','ParenMatch','style', default='opener')
+        cls.FLASH_DELAY = idleConf.GetOption(
+                'extensions','ParenMatch','flash-delay', type='int',default=500)
+        cls.BELL = idleConf.GetOption(
+                'extensions','ParenMatch','bell', type='bool', default=1)
+        cls.HILITE_CONFIG = idleConf.GetHighlight(idleConf.CurrentTheme(),
+                                                  'hilite')
+
+    def activate_restore(self):
+        "Activate mechanism to restore text from highlighting."
+        if not self.is_restore_active:
+            for seq in self.RESTORE_SEQUENCES:
+                self.text.event_add(self.RESTORE_VIRTUAL_EVENT_NAME, seq)
+            self.is_restore_active = True
+
+    def deactivate_restore(self):
+        "Remove restore event bindings."
+        if self.is_restore_active:
+            for seq in self.RESTORE_SEQUENCES:
+                self.text.event_delete(self.RESTORE_VIRTUAL_EVENT_NAME, seq)
+            self.is_restore_active = False
+
+    def flash_paren_event(self, event):
+        "Handle editor 'show surrounding parens' event (menu or shortcut)."
+        indices = (HyperParser(self.editwin, "insert")
+                   .get_surrounding_brackets())
+        self.finish_paren_event(indices)
+        return "break"
+
+    def paren_closed_event(self, event):
+        "Handle user input of closer."
+        # If user bound non-closer to <<paren-closed>>, quit.
+        closer = self.text.get("insert-1c")
+        if closer not in _openers:
+            return
+        hp = HyperParser(self.editwin, "insert-1c")
+        if not hp.is_in_code():
+            return
+        indices = hp.get_surrounding_brackets(_openers[closer], True)
+        self.finish_paren_event(indices)
+        return  # Allow calltips to see ')'
+
+    def finish_paren_event(self, indices):
+        if indices is None and self.BELL:
+            self.text.bell()
+            return
+        self.activate_restore()
+        # self.create_tag(indices)
+        self.tagfuncs.get(self.STYLE, self.create_tag_expression)(self, indices)
+        # self.set_timeout()
+        (self.set_timeout_last if self.FLASH_DELAY else
+                            self.set_timeout_none)()
+
+    def restore_event(self, event=None):
+        "Remove effect of doing match."
+        self.text.tag_delete("paren")
+        self.deactivate_restore()
+        self.counter += 1   # disable the last timer, if there is one.
+
+    def handle_restore_timer(self, timer_count):
+        if timer_count == self.counter:
+            self.restore_event()
+
+    # any one of the create_tag_XXX methods can be used depending on
+    # the style
+
+    def create_tag_opener(self, indices):
+        """Highlight the single paren that matches"""
+        self.text.tag_add("paren", indices[0])
+        self.text.tag_config("paren", self.HILITE_CONFIG)
+
+    def create_tag_parens(self, indices):
+        """Highlight the left and right parens"""
+        if self.text.get(indices[1]) in (')', ']', '}'):
+            rightindex = indices[1]+"+1c"
+        else:
+            rightindex = indices[1]
+        self.text.tag_add("paren", indices[0], indices[0]+"+1c", rightindex+"-1c", rightindex)
+        self.text.tag_config("paren", self.HILITE_CONFIG)
+
+    def create_tag_expression(self, indices):
+        """Highlight the entire expression"""
+        if self.text.get(indices[1]) in (')', ']', '}'):
+            rightindex = indices[1]+"+1c"
+        else:
+            rightindex = indices[1]
+        self.text.tag_add("paren", indices[0], rightindex)
+        self.text.tag_config("paren", self.HILITE_CONFIG)
+
+    tagfuncs = {
+        'opener': create_tag_opener,
+        'default': create_tag_opener,
+        'parens': create_tag_parens,
+        'expression': create_tag_expression,
+        }
+
+    # any one of the set_timeout_XXX methods can be used depending on
+    # the style
+
+    def set_timeout_none(self):
+        """Highlight will remain until user input turns it off
+        or the insert has moved"""
+        # After CHECK_DELAY, call a function which disables the "paren" tag
+        # if the event is for the most recent timer and the insert has changed,
+        # or schedules another call for itself.
+        self.counter += 1
+        def callme(callme, self=self, c=self.counter,
+                   index=self.text.index("insert")):
+            if index != self.text.index("insert"):
+                self.handle_restore_timer(c)
+            else:
+                self.editwin.text_frame.after(CHECK_DELAY, callme, callme)
+        self.editwin.text_frame.after(CHECK_DELAY, callme, callme)
+
+    def set_timeout_last(self):
+        """The last highlight created will be removed after FLASH_DELAY millisecs"""
+        # associate a counter with an event; only disable the "paren"
+        # tag if the event is for the most recent timer.
+        self.counter += 1
+        self.editwin.text_frame.after(
+            self.FLASH_DELAY,
+            lambda self=self, c=self.counter: self.handle_restore_timer(c))
+
+
+ParenMatch.reload()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_parenmatch', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pathbrowser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pathbrowser.py
new file mode 100644
index 0000000000000000000000000000000000000000..48a77875ba5801c96a7db0443bad973dca0d1df7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pathbrowser.py
@@ -0,0 +1,107 @@
+import importlib.machinery
+import os
+import sys
+
+from idlelib.browser import ModuleBrowser, ModuleBrowserTreeItem
+from idlelib.tree import TreeItem
+
+
+class PathBrowser(ModuleBrowser):
+
+    def __init__(self, master, *, _htest=False, _utest=False):
+        """
+        _htest - bool, change box location when running htest
+        """
+        self.master = master
+        self._htest = _htest
+        self._utest = _utest
+        self.init()
+
+    def settitle(self):
+        "Set window titles."
+        self.top.wm_title("Path Browser")
+        self.top.wm_iconname("Path Browser")
+
+    def rootnode(self):
+        return PathBrowserTreeItem()
+
+
+class PathBrowserTreeItem(TreeItem):
+
+    def GetText(self):
+        return "sys.path"
+
+    def GetSubList(self):
+        sublist = []
+        for dir in sys.path:
+            item = DirBrowserTreeItem(dir)
+            sublist.append(item)
+        return sublist
+
+
+class DirBrowserTreeItem(TreeItem):
+
+    def __init__(self, dir, packages=[]):
+        self.dir = dir
+        self.packages = packages
+
+    def GetText(self):
+        if not self.packages:
+            return self.dir
+        else:
+            return self.packages[-1] + ": package"
+
+    def GetSubList(self):
+        try:
+            names = os.listdir(self.dir or os.curdir)
+        except OSError:
+            return []
+        packages = []
+        for name in names:
+            file = os.path.join(self.dir, name)
+            if self.ispackagedir(file):
+                nn = os.path.normcase(name)
+                packages.append((nn, name, file))
+        packages.sort()
+        sublist = []
+        for nn, name, file in packages:
+            item = DirBrowserTreeItem(file, self.packages + [name])
+            sublist.append(item)
+        for nn, name in self.listmodules(names):
+            item = ModuleBrowserTreeItem(os.path.join(self.dir, name))
+            sublist.append(item)
+        return sublist
+
+    def ispackagedir(self, file):
+        " Return true for directories that are packages."
+        if not os.path.isdir(file):
+            return False
+        init = os.path.join(file, "__init__.py")
+        return os.path.exists(init)
+
+    def listmodules(self, allnames):
+        modules = {}
+        suffixes = importlib.machinery.EXTENSION_SUFFIXES[:]
+        suffixes += importlib.machinery.SOURCE_SUFFIXES
+        suffixes += importlib.machinery.BYTECODE_SUFFIXES
+        sorted = []
+        for suff in suffixes:
+            i = -len(suff)
+            for name in allnames[:]:
+                normed_name = os.path.normcase(name)
+                if normed_name[i:] == suff:
+                    mod_name = name[:i]
+                    if mod_name not in modules:
+                        modules[mod_name] = None
+                        sorted.append((normed_name, name))
+                        allnames.remove(name)
+        sorted.sort()
+        return sorted
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_pathbrowser', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(PathBrowser)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/percolator.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/percolator.py
new file mode 100644
index 0000000000000000000000000000000000000000..aa73427c4915c8c0e561d484f40f2af6a1f70f07
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/percolator.py
@@ -0,0 +1,120 @@
+from idlelib.delegator import Delegator
+from idlelib.redirector import WidgetRedirector
+
+
+class Percolator:
+
+    def __init__(self, text):
+        # XXX would be nice to inherit from Delegator
+        self.text = text
+        self.redir = WidgetRedirector(text)
+        self.top = self.bottom = Delegator(text)
+        self.bottom.insert = self.redir.register("insert", self.insert)
+        self.bottom.delete = self.redir.register("delete", self.delete)
+        self.filters = []
+
+    def close(self):
+        while self.top is not self.bottom:
+            self.removefilter(self.top)
+        self.top = None
+        self.bottom.setdelegate(None)
+        self.bottom = None
+        self.redir.close()
+        self.redir = None
+        self.text = None
+
+    def insert(self, index, chars, tags=None):
+        # Could go away if inheriting from Delegator
+        self.top.insert(index, chars, tags)
+
+    def delete(self, index1, index2=None):
+        # Could go away if inheriting from Delegator
+        self.top.delete(index1, index2)
+
+    def insertfilter(self, filter):
+        # Perhaps rename to pushfilter()?
+        assert isinstance(filter, Delegator)
+        assert filter.delegate is None
+        filter.setdelegate(self.top)
+        self.top = filter
+
+    def insertfilterafter(self, filter, after):
+        assert isinstance(filter, Delegator)
+        assert isinstance(after, Delegator)
+        assert filter.delegate is None
+
+        f = self.top
+        f.resetcache()
+        while f is not after:
+            assert f is not self.bottom
+            f = f.delegate
+            f.resetcache()
+
+        filter.setdelegate(f.delegate)
+        f.setdelegate(filter)
+
+    def removefilter(self, filter):
+        # XXX Perhaps should only support popfilter()?
+        assert isinstance(filter, Delegator)
+        assert filter.delegate is not None
+        f = self.top
+        if f is filter:
+            self.top = filter.delegate
+            filter.setdelegate(None)
+        else:
+            while f.delegate is not filter:
+                assert f is not self.bottom
+                f.resetcache()
+                f = f.delegate
+            f.setdelegate(filter.delegate)
+            filter.setdelegate(None)
+
+
+def _percolator(parent):  # htest #
+    import tkinter as tk
+
+    class Tracer(Delegator):
+        def __init__(self, name):
+            self.name = name
+            Delegator.__init__(self, None)
+
+        def insert(self, *args):
+            print(self.name, ": insert", args)
+            self.delegate.insert(*args)
+
+        def delete(self, *args):
+            print(self.name, ": delete", args)
+            self.delegate.delete(*args)
+
+    top = tk.Toplevel(parent)
+    top.title("Test Percolator")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+    text = tk.Text(top)
+    p = Percolator(text)
+    pin = p.insertfilter
+    pout = p.removefilter
+    t1 = Tracer("t1")
+    t2 = Tracer("t2")
+
+    def toggle1():
+        (pin if var1.get() else pout)(t1)
+    def toggle2():
+        (pin if var2.get() else pout)(t2)
+
+    text.pack()
+    text.focus_set()
+    var1 = tk.IntVar(parent)
+    cb1 = tk.Checkbutton(top, text="Tracer1", command=toggle1, variable=var1)
+    cb1.pack()
+    var2 = tk.IntVar(parent)
+    cb2 = tk.Checkbutton(top, text="Tracer2", command=toggle2, variable=var2)
+    cb2.pack()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_percolator', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_percolator)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyparse.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyparse.py
new file mode 100644
index 0000000000000000000000000000000000000000..8545c63e1435d46c8534c5a24d01834c392257d7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyparse.py
@@ -0,0 +1,589 @@
+"""Define partial Python code Parser used by editor and hyperparser.
+
+Instances of ParseMap are used with str.translate.
+
+The following bound search and match functions are defined:
+_synchre - start of popular statement;
+_junkre - whitespace or comment line;
+_match_stringre: string, possibly without closer;
+_itemre - line that may have bracket structure start;
+_closere - line that must be followed by dedent.
+_chew_ordinaryre - non-special characters.
+"""
+import re
+
+# Reason last statement is continued (or C_NONE if it's not).
+(C_NONE, C_BACKSLASH, C_STRING_FIRST_LINE,
+ C_STRING_NEXT_LINES, C_BRACKET) = range(5)
+
+# Find what looks like the start of a popular statement.
+
+_synchre = re.compile(r"""
+    ^
+    [ \t]*
+    (?: while
+    |   else
+    |   def
+    |   return
+    |   assert
+    |   break
+    |   class
+    |   continue
+    |   elif
+    |   try
+    |   except
+    |   raise
+    |   import
+    |   yield
+    )
+    \b
+""", re.VERBOSE | re.MULTILINE).search
+
+# Match blank line or non-indenting comment line.
+
+_junkre = re.compile(r"""
+    [ \t]*
+    (?: \# \S .* )?
+    \n
+""", re.VERBOSE).match
+
+# Match any flavor of string; the terminating quote is optional
+# so that we're robust in the face of incomplete program text.
+
+_match_stringre = re.compile(r"""
+    \""" [^"\\]* (?:
+                     (?: \\. | "(?!"") )
+                     [^"\\]*
+                 )*
+    (?: \""" )?
+
+|   " [^"\\\n]* (?: \\. [^"\\\n]* )* "?
+
+|   ''' [^'\\]* (?:
+                   (?: \\. | '(?!'') )
+                   [^'\\]*
+                )*
+    (?: ''' )?
+
+|   ' [^'\\\n]* (?: \\. [^'\\\n]* )* '?
+""", re.VERBOSE | re.DOTALL).match
+
+# Match a line that starts with something interesting;
+# used to find the first item of a bracket structure.
+
+_itemre = re.compile(r"""
+    [ \t]*
+    [^\s#\\]    # if we match, m.end()-1 is the interesting char
+""", re.VERBOSE).match
+
+# Match start of statements that should be followed by a dedent.
+
+_closere = re.compile(r"""
+    \s*
+    (?: return
+    |   break
+    |   continue
+    |   raise
+    |   pass
+    )
+    \b
+""", re.VERBOSE).match
+
+# Chew up non-special chars as quickly as possible.  If match is
+# successful, m.end() less 1 is the index of the last boring char
+# matched.  If match is unsuccessful, the string starts with an
+# interesting char.
+
+_chew_ordinaryre = re.compile(r"""
+    [^[\](){}#'"\\]+
+""", re.VERBOSE).match
+
+
+class ParseMap(dict):
+    r"""Dict subclass that maps anything not in dict to 'x'.
+
+    This is designed to be used with str.translate in study1.
+    Anything not specifically mapped otherwise becomes 'x'.
+    Example: replace everything except whitespace with 'x'.
+
+    >>> keepwhite = ParseMap((ord(c), ord(c)) for c in ' \t\n\r')
+    >>> "a + b\tc\nd".translate(keepwhite)
+    'x x x\tx\nx'
+    """
+    # Calling this triples access time; see bpo-32940
+    def __missing__(self, key):
+        return 120  # ord('x')
+
+
+# Map all ascii to 120 to avoid __missing__ call, then replace some.
+trans = ParseMap.fromkeys(range(128), 120)
+trans.update((ord(c), ord('(')) for c in "({[")  # open brackets => '(';
+trans.update((ord(c), ord(')')) for c in ")}]")  # close brackets => ')'.
+trans.update((ord(c), ord(c)) for c in "\"'\\\n#")  # Keep these.
+
+
+class Parser:
+
+    def __init__(self, indentwidth, tabwidth):
+        self.indentwidth = indentwidth
+        self.tabwidth = tabwidth
+
+    def set_code(self, s):
+        assert len(s) == 0 or s[-1] == '\n'
+        self.code = s
+        self.study_level = 0
+
+    def find_good_parse_start(self, is_char_in_string):
+        """
+        Return index of a good place to begin parsing, as close to the
+        end of the string as possible.  This will be the start of some
+        popular stmt like "if" or "def".  Return None if none found:
+        the caller should pass more prior context then, if possible, or
+        if not (the entire program text up until the point of interest
+        has already been tried) pass 0 to set_lo().
+
+        This will be reliable iff given a reliable is_char_in_string()
+        function, meaning that when it says "no", it's absolutely
+        guaranteed that the char is not in a string.
+        """
+        code, pos = self.code, None
+
+        # Peek back from the end for a good place to start,
+        # but don't try too often; pos will be left None, or
+        # bumped to a legitimate synch point.
+        limit = len(code)
+        for tries in range(5):
+            i = code.rfind(":\n", 0, limit)
+            if i < 0:
+                break
+            i = code.rfind('\n', 0, i) + 1  # start of colon line (-1+1=0)
+            m = _synchre(code, i, limit)
+            if m and not is_char_in_string(m.start()):
+                pos = m.start()
+                break
+            limit = i
+        if pos is None:
+            # Nothing looks like a block-opener, or stuff does
+            # but is_char_in_string keeps returning true; most likely
+            # we're in or near a giant string, the colorizer hasn't
+            # caught up enough to be helpful, or there simply *aren't*
+            # any interesting stmts.  In any of these cases we're
+            # going to have to parse the whole thing to be sure, so
+            # give it one last try from the start, but stop wasting
+            # time here regardless of the outcome.
+            m = _synchre(code)
+            if m and not is_char_in_string(m.start()):
+                pos = m.start()
+            return pos
+
+        # Peeking back worked; look forward until _synchre no longer
+        # matches.
+        i = pos + 1
+        while m := _synchre(code, i):
+            s, i = m.span()
+            if not is_char_in_string(s):
+                pos = s
+        return pos
+
+    def set_lo(self, lo):
+        """ Throw away the start of the string.
+
+        Intended to be called with the result of find_good_parse_start().
+        """
+        assert lo == 0 or self.code[lo-1] == '\n'
+        if lo > 0:
+            self.code = self.code[lo:]
+
+    def _study1(self):
+        """Find the line numbers of non-continuation lines.
+
+        As quickly as humanly possible <wink>, find the line numbers (0-
+        based) of the non-continuation lines.
+        Creates self.{goodlines, continuation}.
+        """
+        if self.study_level >= 1:
+            return
+        self.study_level = 1
+
+        # Map all uninteresting characters to "x", all open brackets
+        # to "(", all close brackets to ")", then collapse runs of
+        # uninteresting characters.  This can cut the number of chars
+        # by a factor of 10-40, and so greatly speed the following loop.
+        code = self.code
+        code = code.translate(trans)
+        code = code.replace('xxxxxxxx', 'x')
+        code = code.replace('xxxx', 'x')
+        code = code.replace('xx', 'x')
+        code = code.replace('xx', 'x')
+        code = code.replace('\nx', '\n')
+        # Replacing x\n with \n would be incorrect because
+        # x may be preceded by a backslash.
+
+        # March over the squashed version of the program, accumulating
+        # the line numbers of non-continued stmts, and determining
+        # whether & why the last stmt is a continuation.
+        continuation = C_NONE
+        level = lno = 0     # level is nesting level; lno is line number
+        self.goodlines = goodlines = [0]
+        push_good = goodlines.append
+        i, n = 0, len(code)
+        while i < n:
+            ch = code[i]
+            i = i+1
+
+            # cases are checked in decreasing order of frequency
+            if ch == 'x':
+                continue
+
+            if ch == '\n':
+                lno = lno + 1
+                if level == 0:
+                    push_good(lno)
+                    # else we're in an unclosed bracket structure
+                continue
+
+            if ch == '(':
+                level = level + 1
+                continue
+
+            if ch == ')':
+                if level:
+                    level = level - 1
+                    # else the program is invalid, but we can't complain
+                continue
+
+            if ch == '"' or ch == "'":
+                # consume the string
+                quote = ch
+                if code[i-1:i+2] == quote * 3:
+                    quote = quote * 3
+                firstlno = lno
+                w = len(quote) - 1
+                i = i+w
+                while i < n:
+                    ch = code[i]
+                    i = i+1
+
+                    if ch == 'x':
+                        continue
+
+                    if code[i-1:i+w] == quote:
+                        i = i+w
+                        break
+
+                    if ch == '\n':
+                        lno = lno + 1
+                        if w == 0:
+                            # unterminated single-quoted string
+                            if level == 0:
+                                push_good(lno)
+                            break
+                        continue
+
+                    if ch == '\\':
+                        assert i < n
+                        if code[i] == '\n':
+                            lno = lno + 1
+                        i = i+1
+                        continue
+
+                    # else comment char or paren inside string
+
+                else:
+                    # didn't break out of the loop, so we're still
+                    # inside a string
+                    if (lno - 1) == firstlno:
+                        # before the previous \n in code, we were in the first
+                        # line of the string
+                        continuation = C_STRING_FIRST_LINE
+                    else:
+                        continuation = C_STRING_NEXT_LINES
+                continue    # with outer loop
+
+            if ch == '#':
+                # consume the comment
+                i = code.find('\n', i)
+                assert i >= 0
+                continue
+
+            assert ch == '\\'
+            assert i < n
+            if code[i] == '\n':
+                lno = lno + 1
+                if i+1 == n:
+                    continuation = C_BACKSLASH
+            i = i+1
+
+        # The last stmt may be continued for all 3 reasons.
+        # String continuation takes precedence over bracket
+        # continuation, which beats backslash continuation.
+        if (continuation != C_STRING_FIRST_LINE
+            and continuation != C_STRING_NEXT_LINES and level > 0):
+            continuation = C_BRACKET
+        self.continuation = continuation
+
+        # Push the final line number as a sentinel value, regardless of
+        # whether it's continued.
+        assert (continuation == C_NONE) == (goodlines[-1] == lno)
+        if goodlines[-1] != lno:
+            push_good(lno)
+
+    def get_continuation_type(self):
+        self._study1()
+        return self.continuation
+
+    def _study2(self):
+        """
+        study1 was sufficient to determine the continuation status,
+        but doing more requires looking at every character.  study2
+        does this for the last interesting statement in the block.
+        Creates:
+            self.stmt_start, stmt_end
+                slice indices of last interesting stmt
+            self.stmt_bracketing
+                the bracketing structure of the last interesting stmt; for
+                example, for the statement "say(boo) or die",
+                stmt_bracketing will be ((0, 0), (0, 1), (2, 0), (2, 1),
+                (4, 0)). Strings and comments are treated as brackets, for
+                the matter.
+            self.lastch
+                last interesting character before optional trailing comment
+            self.lastopenbracketpos
+                if continuation is C_BRACKET, index of last open bracket
+        """
+        if self.study_level >= 2:
+            return
+        self._study1()
+        self.study_level = 2
+
+        # Set p and q to slice indices of last interesting stmt.
+        code, goodlines = self.code, self.goodlines
+        i = len(goodlines) - 1  # Index of newest line.
+        p = len(code)  # End of goodlines[i]
+        while i:
+            assert p
+            # Make p be the index of the stmt at line number goodlines[i].
+            # Move p back to the stmt at line number goodlines[i-1].
+            q = p
+            for nothing in range(goodlines[i-1], goodlines[i]):
+                # tricky: sets p to 0 if no preceding newline
+                p = code.rfind('\n', 0, p-1) + 1
+            # The stmt code[p:q] isn't a continuation, but may be blank
+            # or a non-indenting comment line.
+            if  _junkre(code, p):
+                i = i-1
+            else:
+                break
+        if i == 0:
+            # nothing but junk!
+            assert p == 0
+            q = p
+        self.stmt_start, self.stmt_end = p, q
+
+        # Analyze this stmt, to find the last open bracket (if any)
+        # and last interesting character (if any).
+        lastch = ""
+        stack = []  # stack of open bracket indices
+        push_stack = stack.append
+        bracketing = [(p, 0)]
+        while p < q:
+            # suck up all except ()[]{}'"#\\
+            m = _chew_ordinaryre(code, p, q)
+            if m:
+                # we skipped at least one boring char
+                newp = m.end()
+                # back up over totally boring whitespace
+                i = newp - 1    # index of last boring char
+                while i >= p and code[i] in " \t\n":
+                    i = i-1
+                if i >= p:
+                    lastch = code[i]
+                p = newp
+                if p >= q:
+                    break
+
+            ch = code[p]
+
+            if ch in "([{":
+                push_stack(p)
+                bracketing.append((p, len(stack)))
+                lastch = ch
+                p = p+1
+                continue
+
+            if ch in ")]}":
+                if stack:
+                    del stack[-1]
+                lastch = ch
+                p = p+1
+                bracketing.append((p, len(stack)))
+                continue
+
+            if ch == '"' or ch == "'":
+                # consume string
+                # Note that study1 did this with a Python loop, but
+                # we use a regexp here; the reason is speed in both
+                # cases; the string may be huge, but study1 pre-squashed
+                # strings to a couple of characters per line.  study1
+                # also needed to keep track of newlines, and we don't
+                # have to.
+                bracketing.append((p, len(stack)+1))
+                lastch = ch
+                p = _match_stringre(code, p, q).end()
+                bracketing.append((p, len(stack)))
+                continue
+
+            if ch == '#':
+                # consume comment and trailing newline
+                bracketing.append((p, len(stack)+1))
+                p = code.find('\n', p, q) + 1
+                assert p > 0
+                bracketing.append((p, len(stack)))
+                continue
+
+            assert ch == '\\'
+            p = p+1     # beyond backslash
+            assert p < q
+            if code[p] != '\n':
+                # the program is invalid, but can't complain
+                lastch = ch + code[p]
+            p = p+1     # beyond escaped char
+
+        # end while p < q:
+
+        self.lastch = lastch
+        self.lastopenbracketpos = stack[-1] if stack else None
+        self.stmt_bracketing = tuple(bracketing)
+
+    def compute_bracket_indent(self):
+        """Return number of spaces the next line should be indented.
+
+        Line continuation must be C_BRACKET.
+        """
+        self._study2()
+        assert self.continuation == C_BRACKET
+        j = self.lastopenbracketpos
+        code = self.code
+        n = len(code)
+        origi = i = code.rfind('\n', 0, j) + 1
+        j = j+1     # one beyond open bracket
+        # find first list item; set i to start of its line
+        while j < n:
+            m = _itemre(code, j)
+            if m:
+                j = m.end() - 1     # index of first interesting char
+                extra = 0
+                break
+            else:
+                # this line is junk; advance to next line
+                i = j = code.find('\n', j) + 1
+        else:
+            # nothing interesting follows the bracket;
+            # reproduce the bracket line's indentation + a level
+            j = i = origi
+            while code[j] in " \t":
+                j = j+1
+            extra = self.indentwidth
+        return len(code[i:j].expandtabs(self.tabwidth)) + extra
+
+    def get_num_lines_in_stmt(self):
+        """Return number of physical lines in last stmt.
+
+        The statement doesn't have to be an interesting statement.  This is
+        intended to be called when continuation is C_BACKSLASH.
+        """
+        self._study1()
+        goodlines = self.goodlines
+        return goodlines[-1] - goodlines[-2]
+
+    def compute_backslash_indent(self):
+        """Return number of spaces the next line should be indented.
+
+        Line continuation must be C_BACKSLASH.  Also assume that the new
+        line is the first one following the initial line of the stmt.
+        """
+        self._study2()
+        assert self.continuation == C_BACKSLASH
+        code = self.code
+        i = self.stmt_start
+        while code[i] in " \t":
+            i = i+1
+        startpos = i
+
+        # See whether the initial line starts an assignment stmt; i.e.,
+        # look for an = operator
+        endpos = code.find('\n', startpos) + 1
+        found = level = 0
+        while i < endpos:
+            ch = code[i]
+            if ch in "([{":
+                level = level + 1
+                i = i+1
+            elif ch in ")]}":
+                if level:
+                    level = level - 1
+                i = i+1
+            elif ch == '"' or ch == "'":
+                i = _match_stringre(code, i, endpos).end()
+            elif ch == '#':
+                # This line is unreachable because the # makes a comment of
+                # everything after it.
+                break
+            elif level == 0 and ch == '=' and \
+                   (i == 0 or code[i-1] not in "=<>!") and \
+                   code[i+1] != '=':
+                found = 1
+                break
+            else:
+                i = i+1
+
+        if found:
+            # found a legit =, but it may be the last interesting
+            # thing on the line
+            i = i+1     # move beyond the =
+            found = re.match(r"\s*\\", code[i:endpos]) is None
+
+        if not found:
+            # oh well ... settle for moving beyond the first chunk
+            # of non-whitespace chars
+            i = startpos
+            while code[i] not in " \t\n":
+                i = i+1
+
+        return len(code[self.stmt_start:i].expandtabs(\
+                                     self.tabwidth)) + 1
+
+    def get_base_indent_string(self):
+        """Return the leading whitespace on the initial line of the last
+        interesting stmt.
+        """
+        self._study2()
+        i, n = self.stmt_start, self.stmt_end
+        j = i
+        code = self.code
+        while j < n and code[j] in " \t":
+            j = j + 1
+        return code[i:j]
+
+    def is_block_opener(self):
+        "Return True if the last interesting statement opens a block."
+        self._study2()
+        return self.lastch == ':'
+
+    def is_block_closer(self):
+        "Return True if the last interesting statement closes a block."
+        self._study2()
+        return _closere(self.code, self.stmt_start) is not None
+
+    def get_last_stmt_bracketing(self):
+        """Return bracketing structure of the last interesting statement.
+
+        The returned tuple is in the format defined in _study2().
+        """
+        self._study2()
+        return self.stmt_bracketing
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_pyparse', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyshell.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyshell.py
new file mode 100644
index 0000000000000000000000000000000000000000..1b7c2af1a923d7059a948eed8613dfa3c53575f4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/pyshell.py
@@ -0,0 +1,1699 @@
+#! /usr/bin/env python3
+
+import sys
+if __name__ == "__main__":
+    sys.modules['idlelib.pyshell'] = sys.modules['__main__']
+
+try:
+    from tkinter import *
+except ImportError:
+    print("** IDLE can't import Tkinter.\n"
+          "Your Python may not be configured for Tk. **", file=sys.__stderr__)
+    raise SystemExit(1)
+
+if sys.platform == 'win32':
+    from idlelib.util import fix_win_hidpi
+    fix_win_hidpi()
+
+from tkinter import messagebox
+
+from code import InteractiveInterpreter
+import itertools
+import linecache
+import os
+import os.path
+import re
+import socket
+import subprocess
+from textwrap import TextWrapper
+import threading
+import time
+import tokenize
+import warnings
+
+from idlelib.colorizer import ColorDelegator
+from idlelib.config import idleConf
+from idlelib.delegator import Delegator
+from idlelib import debugger
+from idlelib import debugger_r
+from idlelib.editor import EditorWindow, fixwordbreaks
+from idlelib.filelist import FileList
+from idlelib.outwin import OutputWindow
+from idlelib import replace
+from idlelib import rpc
+from idlelib.run import idle_formatwarning, StdInputFile, StdOutputFile
+from idlelib.undo import UndoDelegator
+
+# Default for testing; defaults to True in main() for running.
+use_subprocess = False
+
+HOST = '127.0.0.1' # python execution server on localhost loopback
+PORT = 0  # someday pass in host, port for remote debug capability
+
+try:  # In case IDLE started with -n.
+    eof = 'Ctrl-D (end-of-file)'
+    exit.eof = eof
+    quit.eof = eof
+except NameError: # In case python started with -S.
+    pass
+
+# Override warnings module to write to warning_stream.  Initialize to send IDLE
+# internal warnings to the console.  ScriptBinding.check_syntax() will
+# temporarily redirect the stream to the shell window to display warnings when
+# checking user's code.
+warning_stream = sys.__stderr__  # None, at least on Windows, if no console.
+
+def idle_showwarning(
+        message, category, filename, lineno, file=None, line=None):
+    """Show Idle-format warning (after replacing warnings.showwarning).
+
+    The differences are the formatter called, the file=None replacement,
+    which can be None, the capture of the consequence AttributeError,
+    and the output of a hard-coded prompt.
+    """
+    if file is None:
+        file = warning_stream
+    try:
+        file.write(idle_formatwarning(
+                message, category, filename, lineno, line=line))
+        file.write(">>> ")
+    except (AttributeError, OSError):
+        pass  # if file (probably __stderr__) is invalid, skip warning.
+
+_warnings_showwarning = None
+
+def capture_warnings(capture):
+    "Replace warning.showwarning with idle_showwarning, or reverse."
+
+    global _warnings_showwarning
+    if capture:
+        if _warnings_showwarning is None:
+            _warnings_showwarning = warnings.showwarning
+            warnings.showwarning = idle_showwarning
+    else:
+        if _warnings_showwarning is not None:
+            warnings.showwarning = _warnings_showwarning
+            _warnings_showwarning = None
+
+capture_warnings(True)
+
+def extended_linecache_checkcache(filename=None,
+                                  orig_checkcache=linecache.checkcache):
+    """Extend linecache.checkcache to preserve the <pyshell#...> entries
+
+    Rather than repeating the linecache code, patch it to save the
+    <pyshell#...> entries, call the original linecache.checkcache()
+    (skipping them), and then restore the saved entries.
+
+    orig_checkcache is bound at definition time to the original
+    method, allowing it to be patched.
+    """
+    cache = linecache.cache
+    save = {}
+    for key in list(cache):
+        if key[:1] + key[-1:] == '<>':
+            save[key] = cache.pop(key)
+    orig_checkcache(filename)
+    cache.update(save)
+
+# Patch linecache.checkcache():
+linecache.checkcache = extended_linecache_checkcache
+
+
+class PyShellEditorWindow(EditorWindow):
+    "Regular text edit window in IDLE, supports breakpoints"
+
+    def __init__(self, *args):
+        self.breakpoints = []
+        EditorWindow.__init__(self, *args)
+        self.text.bind("<<set-breakpoint>>", self.set_breakpoint_event)
+        self.text.bind("<<clear-breakpoint>>", self.clear_breakpoint_event)
+        self.text.bind("<<open-python-shell>>", self.flist.open_shell)
+
+        #TODO: don't read/write this from/to .idlerc when testing
+        self.breakpointPath = os.path.join(
+                idleConf.userdir, 'breakpoints.lst')
+        # whenever a file is changed, restore breakpoints
+        def filename_changed_hook(old_hook=self.io.filename_change_hook,
+                                  self=self):
+            self.restore_file_breaks()
+            old_hook()
+        self.io.set_filename_change_hook(filename_changed_hook)
+        if self.io.filename:
+            self.restore_file_breaks()
+        self.color_breakpoint_text()
+
+    rmenu_specs = [
+        ("Cut", "<<cut>>", "rmenu_check_cut"),
+        ("Copy", "<<copy>>", "rmenu_check_copy"),
+        ("Paste", "<<paste>>", "rmenu_check_paste"),
+        (None, None, None),
+        ("Set Breakpoint", "<<set-breakpoint>>", None),
+        ("Clear Breakpoint", "<<clear-breakpoint>>", None)
+    ]
+
+    def color_breakpoint_text(self, color=True):
+        "Turn colorizing of breakpoint text on or off"
+        if self.io is None:
+            # possible due to update in restore_file_breaks
+            return
+        if color:
+            theme = idleConf.CurrentTheme()
+            cfg = idleConf.GetHighlight(theme, "break")
+        else:
+            cfg = {'foreground': '', 'background': ''}
+        self.text.tag_config('BREAK', cfg)
+
+    def set_breakpoint(self, lineno):
+        text = self.text
+        filename = self.io.filename
+        text.tag_add("BREAK", "%d.0" % lineno, "%d.0" % (lineno+1))
+        try:
+            self.breakpoints.index(lineno)
+        except ValueError:  # only add if missing, i.e. do once
+            self.breakpoints.append(lineno)
+        try:    # update the subprocess debugger
+            debug = self.flist.pyshell.interp.debugger
+            debug.set_breakpoint(filename, lineno)
+        except: # but debugger may not be active right now....
+            pass
+
+    def set_breakpoint_event(self, event=None):
+        text = self.text
+        filename = self.io.filename
+        if not filename:
+            text.bell()
+            return
+        lineno = int(float(text.index("insert")))
+        self.set_breakpoint(lineno)
+
+    def clear_breakpoint_event(self, event=None):
+        text = self.text
+        filename = self.io.filename
+        if not filename:
+            text.bell()
+            return
+        lineno = int(float(text.index("insert")))
+        try:
+            self.breakpoints.remove(lineno)
+        except:
+            pass
+        text.tag_remove("BREAK", "insert linestart",\
+                        "insert lineend +1char")
+        try:
+            debug = self.flist.pyshell.interp.debugger
+            debug.clear_breakpoint(filename, lineno)
+        except:
+            pass
+
+    def clear_file_breaks(self):
+        if self.breakpoints:
+            text = self.text
+            filename = self.io.filename
+            if not filename:
+                text.bell()
+                return
+            self.breakpoints = []
+            text.tag_remove("BREAK", "1.0", END)
+            try:
+                debug = self.flist.pyshell.interp.debugger
+                debug.clear_file_breaks(filename)
+            except:
+                pass
+
+    def store_file_breaks(self):
+        "Save breakpoints when file is saved"
+        # XXX 13 Dec 2002 KBK Currently the file must be saved before it can
+        #     be run.  The breaks are saved at that time.  If we introduce
+        #     a temporary file save feature the save breaks functionality
+        #     needs to be re-verified, since the breaks at the time the
+        #     temp file is created may differ from the breaks at the last
+        #     permanent save of the file.  Currently, a break introduced
+        #     after a save will be effective, but not persistent.
+        #     This is necessary to keep the saved breaks synched with the
+        #     saved file.
+        #
+        #     Breakpoints are set as tagged ranges in the text.
+        #     Since a modified file has to be saved before it is
+        #     run, and since self.breakpoints (from which the subprocess
+        #     debugger is loaded) is updated during the save, the visible
+        #     breaks stay synched with the subprocess even if one of these
+        #     unexpected breakpoint deletions occurs.
+        breaks = self.breakpoints
+        filename = self.io.filename
+        try:
+            with open(self.breakpointPath) as fp:
+                lines = fp.readlines()
+        except OSError:
+            lines = []
+        try:
+            with open(self.breakpointPath, "w") as new_file:
+                for line in lines:
+                    if not line.startswith(filename + '='):
+                        new_file.write(line)
+                self.update_breakpoints()
+                breaks = self.breakpoints
+                if breaks:
+                    new_file.write(filename + '=' + str(breaks) + '\n')
+        except OSError as err:
+            if not getattr(self.root, "breakpoint_error_displayed", False):
+                self.root.breakpoint_error_displayed = True
+                messagebox.showerror(title='IDLE Error',
+                    message='Unable to update breakpoint list:\n%s'
+                        % str(err),
+                    parent=self.text)
+
+    def restore_file_breaks(self):
+        self.text.update()   # this enables setting "BREAK" tags to be visible
+        if self.io is None:
+            # can happen if IDLE closes due to the .update() call
+            return
+        filename = self.io.filename
+        if filename is None:
+            return
+        if os.path.isfile(self.breakpointPath):
+            with open(self.breakpointPath) as fp:
+                lines = fp.readlines()
+            for line in lines:
+                if line.startswith(filename + '='):
+                    breakpoint_linenumbers = eval(line[len(filename)+1:])
+                    for breakpoint_linenumber in breakpoint_linenumbers:
+                        self.set_breakpoint(breakpoint_linenumber)
+
+    def update_breakpoints(self):
+        "Retrieves all the breakpoints in the current window"
+        text = self.text
+        ranges = text.tag_ranges("BREAK")
+        linenumber_list = self.ranges_to_linenumbers(ranges)
+        self.breakpoints = linenumber_list
+
+    def ranges_to_linenumbers(self, ranges):
+        lines = []
+        for index in range(0, len(ranges), 2):
+            lineno = int(float(ranges[index].string))
+            end = int(float(ranges[index+1].string))
+            while lineno < end:
+                lines.append(lineno)
+                lineno += 1
+        return lines
+
+# XXX 13 Dec 2002 KBK Not used currently
+#    def saved_change_hook(self):
+#        "Extend base method - clear breaks if module is modified"
+#        if not self.get_saved():
+#            self.clear_file_breaks()
+#        EditorWindow.saved_change_hook(self)
+
+    def _close(self):
+        "Extend base method - clear breaks when module is closed"
+        self.clear_file_breaks()
+        EditorWindow._close(self)
+
+
+class PyShellFileList(FileList):
+    "Extend base class: IDLE supports a shell and breakpoints"
+
+    # override FileList's class variable, instances return PyShellEditorWindow
+    # instead of EditorWindow when new edit windows are created.
+    EditorWindow = PyShellEditorWindow
+
+    pyshell = None
+
+    def open_shell(self, event=None):
+        if self.pyshell:
+            self.pyshell.top.wakeup()
+        else:
+            self.pyshell = PyShell(self)
+            if self.pyshell:
+                if not self.pyshell.begin():
+                    return None
+        return self.pyshell
+
+
+class ModifiedColorDelegator(ColorDelegator):
+    "Extend base class: colorizer for the shell window itself"
+    def recolorize_main(self):
+        self.tag_remove("TODO", "1.0", "iomark")
+        self.tag_add("SYNC", "1.0", "iomark")
+        ColorDelegator.recolorize_main(self)
+
+    def removecolors(self):
+        # Don't remove shell color tags before "iomark"
+        for tag in self.tagdefs:
+            self.tag_remove(tag, "iomark", "end")
+
+
+class ModifiedUndoDelegator(UndoDelegator):
+    "Extend base class: forbid insert/delete before the I/O mark"
+    def insert(self, index, chars, tags=None):
+        try:
+            if self.delegate.compare(index, "<", "iomark"):
+                self.delegate.bell()
+                return
+        except TclError:
+            pass
+        UndoDelegator.insert(self, index, chars, tags)
+
+    def delete(self, index1, index2=None):
+        try:
+            if self.delegate.compare(index1, "<", "iomark"):
+                self.delegate.bell()
+                return
+        except TclError:
+            pass
+        UndoDelegator.delete(self, index1, index2)
+
+    def undo_event(self, event):
+        # Temporarily monkey-patch the delegate's .insert() method to
+        # always use the "stdin" tag.  This is needed for undo-ing
+        # deletions to preserve the "stdin" tag, because UndoDelegator
+        # doesn't preserve tags for deleted text.
+        orig_insert = self.delegate.insert
+        self.delegate.insert = \
+            lambda index, chars: orig_insert(index, chars, "stdin")
+        try:
+            super().undo_event(event)
+        finally:
+            self.delegate.insert = orig_insert
+
+
+class UserInputTaggingDelegator(Delegator):
+    """Delegator used to tag user input with "stdin"."""
+    def insert(self, index, chars, tags=None):
+        if tags is None:
+            tags = "stdin"
+        self.delegate.insert(index, chars, tags)
+
+
+class MyRPCClient(rpc.RPCClient):
+
+    def handle_EOF(self):
+        "Override the base class - just re-raise EOFError"
+        raise EOFError
+
+def restart_line(width, filename):  # See bpo-38141.
+    """Return width long restart line formatted with filename.
+
+    Fill line with balanced '='s, with any extras and at least one at
+    the beginning.  Do not end with a trailing space.
+    """
+    tag = f"= RESTART: {filename or 'Shell'} ="
+    if width >= len(tag):
+        div, mod = divmod((width -len(tag)), 2)
+        return f"{(div+mod)*'='}{tag}{div*'='}"
+    else:
+        return tag[:-2]  # Remove ' ='.
+
+
+class ModifiedInterpreter(InteractiveInterpreter):
+
+    def __init__(self, tkconsole):
+        self.tkconsole = tkconsole
+        locals = sys.modules['__main__'].__dict__
+        InteractiveInterpreter.__init__(self, locals=locals)
+        self.restarting = False
+        self.subprocess_arglist = None
+        self.port = PORT
+        self.original_compiler_flags = self.compile.compiler.flags
+
+    _afterid = None
+    rpcclt = None
+    rpcsubproc = None
+
+    def spawn_subprocess(self):
+        if self.subprocess_arglist is None:
+            self.subprocess_arglist = self.build_subprocess_arglist()
+        # gh-127060: Disable traceback colors
+        env = dict(os.environ, TERM='dumb')
+        self.rpcsubproc = subprocess.Popen(self.subprocess_arglist, env=env)
+
+    def build_subprocess_arglist(self):
+        assert (self.port!=0), (
+            "Socket should have been assigned a port number.")
+        w = ['-W' + s for s in sys.warnoptions]
+        # Maybe IDLE is installed and is being accessed via sys.path,
+        # or maybe it's not installed and the idle.py script is being
+        # run from the IDLE source directory.
+        del_exitf = idleConf.GetOption('main', 'General', 'delete-exitfunc',
+                                       default=False, type='bool')
+        command = f"__import__('idlelib.run').run.main({del_exitf!r})"
+        return [sys.executable] + w + ["-c", command, str(self.port)]
+
+    def start_subprocess(self):
+        addr = (HOST, self.port)
+        # GUI makes several attempts to acquire socket, listens for connection
+        for i in range(3):
+            time.sleep(i)
+            try:
+                self.rpcclt = MyRPCClient(addr)
+                break
+            except OSError:
+                pass
+        else:
+            self.display_port_binding_error()
+            return None
+        # if PORT was 0, system will assign an 'ephemeral' port. Find it out:
+        self.port = self.rpcclt.listening_sock.getsockname()[1]
+        # if PORT was not 0, probably working with a remote execution server
+        if PORT != 0:
+            # To allow reconnection within the 2MSL wait (cf. Stevens TCP
+            # V1, 18.6),  set SO_REUSEADDR.  Note that this can be problematic
+            # on Windows since the implementation allows two active sockets on
+            # the same address!
+            self.rpcclt.listening_sock.setsockopt(socket.SOL_SOCKET,
+                                           socket.SO_REUSEADDR, 1)
+        self.spawn_subprocess()
+        #time.sleep(20) # test to simulate GUI not accepting connection
+        # Accept the connection from the Python execution server
+        self.rpcclt.listening_sock.settimeout(10)
+        try:
+            self.rpcclt.accept()
+        except TimeoutError:
+            self.display_no_subprocess_error()
+            return None
+        self.rpcclt.register("console", self.tkconsole)
+        self.rpcclt.register("stdin", self.tkconsole.stdin)
+        self.rpcclt.register("stdout", self.tkconsole.stdout)
+        self.rpcclt.register("stderr", self.tkconsole.stderr)
+        self.rpcclt.register("flist", self.tkconsole.flist)
+        self.rpcclt.register("linecache", linecache)
+        self.rpcclt.register("interp", self)
+        self.transfer_path(with_cwd=True)
+        self.poll_subprocess()
+        return self.rpcclt
+
+    def restart_subprocess(self, with_cwd=False, filename=''):
+        if self.restarting:
+            return self.rpcclt
+        self.restarting = True
+        # close only the subprocess debugger
+        debug = self.getdebugger()
+        if debug:
+            try:
+                # Only close subprocess debugger, don't unregister gui_adap!
+                debugger_r.close_subprocess_debugger(self.rpcclt)
+            except:
+                pass
+        # Kill subprocess, spawn a new one, accept connection.
+        self.rpcclt.close()
+        self.terminate_subprocess()
+        console = self.tkconsole
+        was_executing = console.executing
+        console.executing = False
+        self.spawn_subprocess()
+        try:
+            self.rpcclt.accept()
+        except TimeoutError:
+            self.display_no_subprocess_error()
+            return None
+        self.transfer_path(with_cwd=with_cwd)
+        console.stop_readline()
+        # annotate restart in shell window and mark it
+        console.text.delete("iomark", "end-1c")
+        console.write('\n')
+        console.write(restart_line(console.width, filename))
+        console.text.mark_set("restart", "end-1c")
+        console.text.mark_gravity("restart", "left")
+        if not filename:
+            console.showprompt()
+        # restart subprocess debugger
+        if debug:
+            # Restarted debugger connects to current instance of debug GUI
+            debugger_r.restart_subprocess_debugger(self.rpcclt)
+            # reload remote debugger breakpoints for all PyShellEditWindows
+            debug.load_breakpoints()
+        self.compile.compiler.flags = self.original_compiler_flags
+        self.restarting = False
+        return self.rpcclt
+
+    def __request_interrupt(self):
+        self.rpcclt.remotecall("exec", "interrupt_the_server", (), {})
+
+    def interrupt_subprocess(self):
+        threading.Thread(target=self.__request_interrupt).start()
+
+    def kill_subprocess(self):
+        if self._afterid is not None:
+            self.tkconsole.text.after_cancel(self._afterid)
+        try:
+            self.rpcclt.listening_sock.close()
+        except AttributeError:  # no socket
+            pass
+        try:
+            self.rpcclt.close()
+        except AttributeError:  # no socket
+            pass
+        self.terminate_subprocess()
+        self.tkconsole.executing = False
+        self.rpcclt = None
+
+    def terminate_subprocess(self):
+        "Make sure subprocess is terminated"
+        try:
+            self.rpcsubproc.kill()
+        except OSError:
+            # process already terminated
+            return
+        else:
+            try:
+                self.rpcsubproc.wait()
+            except OSError:
+                return
+
+    def transfer_path(self, with_cwd=False):
+        if with_cwd:        # Issue 13506
+            path = ['']     # include Current Working Directory
+            path.extend(sys.path)
+        else:
+            path = sys.path
+
+        self.runcommand("""if 1:
+        import sys as _sys
+        _sys.path = {!r}
+        del _sys
+        \n""".format(path))
+
+    active_seq = None
+
+    def poll_subprocess(self):
+        clt = self.rpcclt
+        if clt is None:
+            return
+        try:
+            response = clt.pollresponse(self.active_seq, wait=0.05)
+        except (EOFError, OSError, KeyboardInterrupt):
+            # lost connection or subprocess terminated itself, restart
+            # [the KBI is from rpc.SocketIO.handle_EOF()]
+            if self.tkconsole.closing:
+                return
+            response = None
+            self.restart_subprocess()
+        if response:
+            self.tkconsole.resetoutput()
+            self.active_seq = None
+            how, what = response
+            console = self.tkconsole.console
+            if how == "OK":
+                if what is not None:
+                    print(repr(what), file=console)
+            elif how == "EXCEPTION":
+                if self.tkconsole.getvar("<<toggle-jit-stack-viewer>>"):
+                    self.remote_stack_viewer()
+            elif how == "ERROR":
+                errmsg = "pyshell.ModifiedInterpreter: Subprocess ERROR:\n"
+                print(errmsg, what, file=sys.__stderr__)
+                print(errmsg, what, file=console)
+            # we received a response to the currently active seq number:
+            try:
+                self.tkconsole.endexecuting()
+            except AttributeError:  # shell may have closed
+                pass
+        # Reschedule myself
+        if not self.tkconsole.closing:
+            self._afterid = self.tkconsole.text.after(
+                self.tkconsole.pollinterval, self.poll_subprocess)
+
+    debugger = None
+
+    def setdebugger(self, debugger):
+        self.debugger = debugger
+
+    def getdebugger(self):
+        return self.debugger
+
+    def open_remote_stack_viewer(self):
+        """Initiate the remote stack viewer from a separate thread.
+
+        This method is called from the subprocess, and by returning from this
+        method we allow the subprocess to unblock.  After a bit the shell
+        requests the subprocess to open the remote stack viewer which returns a
+        static object looking at the last exception.  It is queried through
+        the RPC mechanism.
+
+        """
+        self.tkconsole.text.after(300, self.remote_stack_viewer)
+        return
+
+    def remote_stack_viewer(self):
+        from idlelib import debugobj_r
+        oid = self.rpcclt.remotequeue("exec", "stackviewer", ("flist",), {})
+        if oid is None:
+            self.tkconsole.root.bell()
+            return
+        item = debugobj_r.StubObjectTreeItem(self.rpcclt, oid)
+        from idlelib.tree import ScrolledCanvas, TreeNode
+        top = Toplevel(self.tkconsole.root)
+        theme = idleConf.CurrentTheme()
+        background = idleConf.GetHighlight(theme, 'normal')['background']
+        sc = ScrolledCanvas(top, bg=background, highlightthickness=0)
+        sc.frame.pack(expand=1, fill="both")
+        node = TreeNode(sc.canvas, None, item)
+        node.expand()
+        # XXX Should GC the remote tree when closing the window
+
+    gid = 0
+
+    def execsource(self, source):
+        "Like runsource() but assumes complete exec source"
+        filename = self.stuffsource(source)
+        self.execfile(filename, source)
+
+    def execfile(self, filename, source=None):
+        "Execute an existing file"
+        if source is None:
+            with tokenize.open(filename) as fp:
+                source = fp.read()
+                if use_subprocess:
+                    source = (f"__file__ = r'''{os.path.abspath(filename)}'''\n"
+                              + source + "\ndel __file__")
+        try:
+            code = compile(source, filename, "exec")
+        except (OverflowError, SyntaxError):
+            self.tkconsole.resetoutput()
+            print('*** Error in script or command!\n'
+                 'Traceback (most recent call last):',
+                  file=self.tkconsole.stderr)
+            InteractiveInterpreter.showsyntaxerror(self, filename)
+            self.tkconsole.showprompt()
+        else:
+            self.runcode(code)
+
+    def runsource(self, source):
+        "Extend base class method: Stuff the source in the line cache first"
+        filename = self.stuffsource(source)
+        # at the moment, InteractiveInterpreter expects str
+        assert isinstance(source, str)
+        # InteractiveInterpreter.runsource() calls its runcode() method,
+        # which is overridden (see below)
+        return InteractiveInterpreter.runsource(self, source, filename)
+
+    def stuffsource(self, source):
+        "Stuff source in the filename cache"
+        filename = "<pyshell#%d>" % self.gid
+        self.gid = self.gid + 1
+        lines = source.split("\n")
+        linecache.cache[filename] = len(source)+1, 0, lines, filename
+        return filename
+
+    def prepend_syspath(self, filename):
+        "Prepend sys.path with file's directory if not already included"
+        self.runcommand("""if 1:
+            _filename = {!r}
+            import sys as _sys
+            from os.path import dirname as _dirname
+            _dir = _dirname(_filename)
+            if not _dir in _sys.path:
+                _sys.path.insert(0, _dir)
+            del _filename, _sys, _dirname, _dir
+            \n""".format(filename))
+
+    def showsyntaxerror(self, filename=None, **kwargs):
+        """Override Interactive Interpreter method: Use Colorizing
+
+        Color the offending position instead of printing it and pointing at it
+        with a caret.
+
+        """
+        tkconsole = self.tkconsole
+        text = tkconsole.text
+        text.tag_remove("ERROR", "1.0", "end")
+        type, value, tb = sys.exc_info()
+        msg = getattr(value, 'msg', '') or value or "<no detail available>"
+        lineno = getattr(value, 'lineno', '') or 1
+        offset = getattr(value, 'offset', '') or 0
+        if offset == 0:
+            lineno += 1 #mark end of offending line
+        if lineno == 1:
+            pos = "iomark + %d chars" % (offset-1)
+        else:
+            pos = "iomark linestart + %d lines + %d chars" % \
+                  (lineno-1, offset-1)
+        tkconsole.colorize_syntax_error(text, pos)
+        tkconsole.resetoutput()
+        self.write("SyntaxError: %s\n" % msg)
+        tkconsole.showprompt()
+
+    def showtraceback(self):
+        "Extend base class method to reset output properly"
+        self.tkconsole.resetoutput()
+        self.checklinecache()
+        InteractiveInterpreter.showtraceback(self)
+        if self.tkconsole.getvar("<<toggle-jit-stack-viewer>>"):
+            self.tkconsole.open_stack_viewer()
+
+    def checklinecache(self):
+        "Remove keys other than '<pyshell#n>'."
+        cache = linecache.cache
+        for key in list(cache):  # Iterate list because mutate cache.
+            if key[:1] + key[-1:] != "<>":
+                del cache[key]
+
+    def runcommand(self, code):
+        "Run the code without invoking the debugger"
+        # The code better not raise an exception!
+        if self.tkconsole.executing:
+            self.display_executing_dialog()
+            return 0
+        if self.rpcclt:
+            self.rpcclt.remotequeue("exec", "runcode", (code,), {})
+        else:
+            exec(code, self.locals)
+        return 1
+
+    def runcode(self, code):
+        "Override base class method"
+        if self.tkconsole.executing:
+            self.restart_subprocess()
+        self.checklinecache()
+        debugger = self.debugger
+        try:
+            self.tkconsole.beginexecuting()
+            if not debugger and self.rpcclt is not None:
+                self.active_seq = self.rpcclt.asyncqueue("exec", "runcode",
+                                                        (code,), {})
+            elif debugger:
+                debugger.run(code, self.locals)
+            else:
+                exec(code, self.locals)
+        except SystemExit:
+            if not self.tkconsole.closing:
+                if messagebox.askyesno(
+                    "Exit?",
+                    "Do you want to exit altogether?",
+                    default="yes",
+                    parent=self.tkconsole.text):
+                    raise
+                else:
+                    self.showtraceback()
+            else:
+                raise
+        except:
+            if use_subprocess:
+                print("IDLE internal error in runcode()",
+                      file=self.tkconsole.stderr)
+                self.showtraceback()
+                self.tkconsole.endexecuting()
+            else:
+                if self.tkconsole.canceled:
+                    self.tkconsole.canceled = False
+                    print("KeyboardInterrupt", file=self.tkconsole.stderr)
+                else:
+                    self.showtraceback()
+        finally:
+            if not use_subprocess:
+                try:
+                    self.tkconsole.endexecuting()
+                except AttributeError:  # shell may have closed
+                    pass
+
+    def write(self, s):
+        "Override base class method"
+        return self.tkconsole.stderr.write(s)
+
+    def display_port_binding_error(self):
+        messagebox.showerror(
+            "Port Binding Error",
+            "IDLE can't bind to a TCP/IP port, which is necessary to "
+            "communicate with its Python execution server.  This might be "
+            "because no networking is installed on this computer.  "
+            "Run IDLE with the -n command line switch to start without a "
+            "subprocess and refer to Help/IDLE Help 'Running without a "
+            "subprocess' for further details.",
+            parent=self.tkconsole.text)
+
+    def display_no_subprocess_error(self):
+        messagebox.showerror(
+            "Subprocess Connection Error",
+            "IDLE's subprocess didn't make connection.\n"
+            "See the 'Startup failure' section of the IDLE doc, online at\n"
+            "https://docs.python.org/3/library/idle.html#startup-failure",
+            parent=self.tkconsole.text)
+
+    def display_executing_dialog(self):
+        messagebox.showerror(
+            "Already executing",
+            "The Python Shell window is already executing a command; "
+            "please wait until it is finished.",
+            parent=self.tkconsole.text)
+
+
+class PyShell(OutputWindow):
+    from idlelib.squeezer import Squeezer
+
+    shell_title = "IDLE Shell"
+
+    # Override classes
+    ColorDelegator = ModifiedColorDelegator
+    UndoDelegator = ModifiedUndoDelegator
+
+    # Override menus
+    menu_specs = [
+        ("file", "_File"),
+        ("edit", "_Edit"),
+        ("debug", "_Debug"),
+        ("options", "_Options"),
+        ("window", "_Window"),
+        ("help", "_Help"),
+    ]
+
+    # Extend right-click context menu
+    rmenu_specs = OutputWindow.rmenu_specs + [
+        ("Squeeze", "<<squeeze-current-text>>"),
+    ]
+    _idx = 1 + len(list(itertools.takewhile(
+        lambda rmenu_item: rmenu_item[0] != "Copy", rmenu_specs)
+    ))
+    rmenu_specs.insert(_idx, ("Copy with prompts",
+                              "<<copy-with-prompts>>",
+                              "rmenu_check_copy"))
+    del _idx
+
+    allow_line_numbers = False
+    user_input_insert_tags = "stdin"
+
+    # New classes
+    from idlelib.history import History
+    from idlelib.sidebar import ShellSidebar
+
+    def __init__(self, flist=None):
+        ms = self.menu_specs
+        if ms[2][0] != "shell":
+            ms.insert(2, ("shell", "She_ll"))
+        self.interp = ModifiedInterpreter(self)
+        if flist is None:
+            root = Tk()
+            fixwordbreaks(root)
+            root.withdraw()
+            flist = PyShellFileList(root)
+
+        self.shell_sidebar = None  # initialized below
+
+        OutputWindow.__init__(self, flist, None, None)
+
+        self.usetabs = False
+        # indentwidth must be 8 when using tabs.  See note in EditorWindow:
+        self.indentwidth = 4
+
+        self.sys_ps1 = sys.ps1 if hasattr(sys, 'ps1') else '>>>\n'
+        self.prompt_last_line = self.sys_ps1.split('\n')[-1]
+        self.prompt = self.sys_ps1  # Changes when debug active
+
+        text = self.text
+        text.configure(wrap="char")
+        text.bind("<<newline-and-indent>>", self.enter_callback)
+        text.bind("<<plain-newline-and-indent>>", self.linefeed_callback)
+        text.bind("<<interrupt-execution>>", self.cancel_callback)
+        text.bind("<<end-of-file>>", self.eof_callback)
+        text.bind("<<open-stack-viewer>>", self.open_stack_viewer)
+        text.bind("<<toggle-debugger>>", self.toggle_debugger)
+        text.bind("<<toggle-jit-stack-viewer>>", self.toggle_jit_stack_viewer)
+        text.bind("<<copy-with-prompts>>", self.copy_with_prompts_callback)
+        if use_subprocess:
+            text.bind("<<view-restart>>", self.view_restart_mark)
+            text.bind("<<restart-shell>>", self.restart_shell)
+        self.squeezer = self.Squeezer(self)
+        text.bind("<<squeeze-current-text>>",
+                  self.squeeze_current_text_event)
+
+        self.save_stdout = sys.stdout
+        self.save_stderr = sys.stderr
+        self.save_stdin = sys.stdin
+        from idlelib import iomenu
+        self.stdin = StdInputFile(self, "stdin",
+                                  iomenu.encoding, iomenu.errors)
+        self.stdout = StdOutputFile(self, "stdout",
+                                    iomenu.encoding, iomenu.errors)
+        self.stderr = StdOutputFile(self, "stderr",
+                                    iomenu.encoding, "backslashreplace")
+        self.console = StdOutputFile(self, "console",
+                                     iomenu.encoding, iomenu.errors)
+        if not use_subprocess:
+            sys.stdout = self.stdout
+            sys.stderr = self.stderr
+            sys.stdin = self.stdin
+        try:
+            # page help() text to shell.
+            import pydoc # import must be done here to capture i/o rebinding.
+            # XXX KBK 27Dec07 use text viewer someday, but must work w/o subproc
+            pydoc.pager = pydoc.plainpager
+        except:
+            sys.stderr = sys.__stderr__
+            raise
+        #
+        self.history = self.History(self.text)
+        #
+        self.pollinterval = 50  # millisec
+
+        self.shell_sidebar = self.ShellSidebar(self)
+
+        # Insert UserInputTaggingDelegator at the top of the percolator,
+        # but make calls to text.insert() skip it.  This causes only insert
+        # events generated in Tcl/Tk to go through this delegator.
+        self.text.insert = self.per.top.insert
+        self.per.insertfilter(UserInputTaggingDelegator())
+
+        if not use_subprocess:
+            # Menu options "View Last Restart" and "Restart Shell" are disabled
+            self.update_menu_state("shell", 0, "disabled")
+            self.update_menu_state("shell", 1, "disabled")
+
+    def ResetFont(self):
+        super().ResetFont()
+
+        if self.shell_sidebar is not None:
+            self.shell_sidebar.update_font()
+
+    def ResetColorizer(self):
+        super().ResetColorizer()
+
+        theme = idleConf.CurrentTheme()
+        tag_colors = {
+          "stdin": {'background': None, 'foreground': None},
+          "stdout": idleConf.GetHighlight(theme, "stdout"),
+          "stderr": idleConf.GetHighlight(theme, "stderr"),
+          "console": idleConf.GetHighlight(theme, "normal"),
+        }
+        for tag, tag_colors_config in tag_colors.items():
+            self.text.tag_configure(tag, **tag_colors_config)
+
+        if self.shell_sidebar is not None:
+            self.shell_sidebar.update_colors()
+
+    def replace_event(self, event):
+        replace.replace(self.text, insert_tags="stdin")
+        return "break"
+
+    def get_standard_extension_names(self):
+        return idleConf.GetExtensions(shell_only=True)
+
+    def get_prompt_text(self, first, last):
+        """Return text between first and last with prompts added."""
+        text = self.text.get(first, last)
+        lineno_range = range(
+            int(float(first)),
+            int(float(last))
+         )
+        prompts = [
+            self.shell_sidebar.line_prompts.get(lineno)
+            for lineno in lineno_range
+        ]
+        return "\n".join(
+            line if prompt is None else f"{prompt} {line}"
+            for prompt, line in zip(prompts, text.splitlines())
+        ) + "\n"
+
+
+    def copy_with_prompts_callback(self, event=None):
+        """Copy selected lines to the clipboard, with prompts.
+
+        This makes the copied text useful for doc-tests and interactive
+        shell code examples.
+
+        This always copies entire lines, even if only part of the first
+        and/or last lines is selected.
+        """
+        text = self.text
+        selfirst = text.index('sel.first linestart')
+        if selfirst is None:  # Should not be possible.
+            return  # No selection, do nothing.
+        sellast = text.index('sel.last')
+        if sellast[-1] != '0':
+            sellast = text.index("sel.last+1line linestart")
+        text.clipboard_clear()
+        prompt_text = self.get_prompt_text(selfirst, sellast)
+        text.clipboard_append(prompt_text)
+
+    reading = False
+    executing = False
+    canceled = False
+    endoffile = False
+    closing = False
+    _stop_readline_flag = False
+
+    def set_warning_stream(self, stream):
+        global warning_stream
+        warning_stream = stream
+
+    def get_warning_stream(self):
+        return warning_stream
+
+    def toggle_debugger(self, event=None):
+        if self.executing:
+            messagebox.showerror("Don't debug now",
+                "You can only toggle the debugger when idle",
+                parent=self.text)
+            self.set_debugger_indicator()
+            return "break"
+        else:
+            db = self.interp.getdebugger()
+            if db:
+                self.close_debugger()
+            else:
+                self.open_debugger()
+
+    def set_debugger_indicator(self):
+        db = self.interp.getdebugger()
+        self.setvar("<<toggle-debugger>>", not not db)
+
+    def toggle_jit_stack_viewer(self, event=None):
+        pass # All we need is the variable
+
+    def close_debugger(self):
+        db = self.interp.getdebugger()
+        if db:
+            self.interp.setdebugger(None)
+            db.close()
+            if self.interp.rpcclt:
+                debugger_r.close_remote_debugger(self.interp.rpcclt)
+            self.resetoutput()
+            self.console.write("[DEBUG OFF]\n")
+            self.prompt = self.sys_ps1
+            self.showprompt()
+        self.set_debugger_indicator()
+
+    def open_debugger(self):
+        if self.interp.rpcclt:
+            dbg_gui = debugger_r.start_remote_debugger(self.interp.rpcclt,
+                                                           self)
+        else:
+            dbg_gui = debugger.Debugger(self)
+        self.interp.setdebugger(dbg_gui)
+        dbg_gui.load_breakpoints()
+        self.prompt = "[DEBUG ON]\n" + self.sys_ps1
+        self.showprompt()
+        self.set_debugger_indicator()
+
+    def debug_menu_postcommand(self):
+        state = 'disabled' if self.executing else 'normal'
+        self.update_menu_state('debug', '*tack*iewer', state)
+
+    def beginexecuting(self):
+        "Helper for ModifiedInterpreter"
+        self.resetoutput()
+        self.executing = True
+
+    def endexecuting(self):
+        "Helper for ModifiedInterpreter"
+        self.executing = False
+        self.canceled = False
+        self.showprompt()
+
+    def close(self):
+        "Extend EditorWindow.close()"
+        if self.executing:
+            response = messagebox.askokcancel(
+                "Kill?",
+                "Your program is still running!\n Do you want to kill it?",
+                default="ok",
+                parent=self.text)
+            if response is False:
+                return "cancel"
+        self.stop_readline()
+        self.canceled = True
+        self.closing = True
+        return EditorWindow.close(self)
+
+    def _close(self):
+        "Extend EditorWindow._close(), shut down debugger and execution server"
+        self.close_debugger()
+        if use_subprocess:
+            self.interp.kill_subprocess()
+        # Restore std streams
+        sys.stdout = self.save_stdout
+        sys.stderr = self.save_stderr
+        sys.stdin = self.save_stdin
+        # Break cycles
+        self.interp = None
+        self.console = None
+        self.flist.pyshell = None
+        self.history = None
+        EditorWindow._close(self)
+
+    def ispythonsource(self, filename):
+        "Override EditorWindow method: never remove the colorizer"
+        return True
+
+    def short_title(self):
+        return self.shell_title
+
+    SPLASHLINE = 'Enter "help" below or click "Help" above for more information.'
+
+    def begin(self):
+        self.text.mark_set("iomark", "insert")
+        self.resetoutput()
+        if use_subprocess:
+            nosub = ''
+            client = self.interp.start_subprocess()
+            if not client:
+                self.close()
+                return False
+        else:
+            nosub = ("==== No Subprocess ====\n\n" +
+                    "WARNING: Running IDLE without a Subprocess is deprecated\n" +
+                    "and will be removed in a later version. See Help/IDLE Help\n" +
+                    "for details.\n\n")
+            sys.displayhook = rpc.displayhook
+
+        self.write("Python %s on %s\n%s\n%s" %
+                   (sys.version, sys.platform, self.SPLASHLINE, nosub))
+        self.text.focus_force()
+        self.showprompt()
+        # User code should use separate default Tk root window
+        import tkinter
+        tkinter._support_default_root = True
+        tkinter._default_root = None
+        return True
+
+    def stop_readline(self):
+        if not self.reading:  # no nested mainloop to exit.
+            return
+        self._stop_readline_flag = True
+        self.top.quit()
+
+    def readline(self):
+        save = self.reading
+        try:
+            self.reading = True
+            self.top.mainloop()  # nested mainloop()
+        finally:
+            self.reading = save
+        if self._stop_readline_flag:
+            self._stop_readline_flag = False
+            return ""
+        line = self.text.get("iomark", "end-1c")
+        if len(line) == 0:  # may be EOF if we quit our mainloop with Ctrl-C
+            line = "\n"
+        self.resetoutput()
+        if self.canceled:
+            self.canceled = False
+            if not use_subprocess:
+                raise KeyboardInterrupt
+        if self.endoffile:
+            self.endoffile = False
+            line = ""
+        return line
+
+    def isatty(self):
+        return True
+
+    def cancel_callback(self, event=None):
+        try:
+            if self.text.compare("sel.first", "!=", "sel.last"):
+                return # Active selection -- always use default binding
+        except:
+            pass
+        if not (self.executing or self.reading):
+            self.resetoutput()
+            self.interp.write("KeyboardInterrupt\n")
+            self.showprompt()
+            return "break"
+        self.endoffile = False
+        self.canceled = True
+        if (self.executing and self.interp.rpcclt):
+            if self.interp.getdebugger():
+                self.interp.restart_subprocess()
+            else:
+                self.interp.interrupt_subprocess()
+        if self.reading:
+            self.top.quit()  # exit the nested mainloop() in readline()
+        return "break"
+
+    def eof_callback(self, event):
+        if self.executing and not self.reading:
+            return # Let the default binding (delete next char) take over
+        if not (self.text.compare("iomark", "==", "insert") and
+                self.text.compare("insert", "==", "end-1c")):
+            return # Let the default binding (delete next char) take over
+        if not self.executing:
+            self.resetoutput()
+            self.close()
+        else:
+            self.canceled = False
+            self.endoffile = True
+            self.top.quit()
+        return "break"
+
+    def linefeed_callback(self, event):
+        # Insert a linefeed without entering anything (still autoindented)
+        if self.reading:
+            self.text.insert("insert", "\n")
+            self.text.see("insert")
+        else:
+            self.newline_and_indent_event(event)
+        return "break"
+
+    def enter_callback(self, event):
+        if self.executing and not self.reading:
+            return # Let the default binding (insert '\n') take over
+        # If some text is selected, recall the selection
+        # (but only if this before the I/O mark)
+        try:
+            sel = self.text.get("sel.first", "sel.last")
+            if sel:
+                if self.text.compare("sel.last", "<=", "iomark"):
+                    self.recall(sel, event)
+                    return "break"
+        except:
+            pass
+        # If we're strictly before the line containing iomark, recall
+        # the current line, less a leading prompt, less leading or
+        # trailing whitespace
+        if self.text.compare("insert", "<", "iomark linestart"):
+            # Check if there's a relevant stdin range -- if so, use it.
+            # Note: "stdin" blocks may include several successive statements,
+            # so look for "console" tags on the newline before each statement
+            # (and possibly on prompts).
+            prev = self.text.tag_prevrange("stdin", "insert")
+            if (
+                    prev and
+                    self.text.compare("insert", "<", prev[1]) and
+                    # The following is needed to handle empty statements.
+                    "console" not in self.text.tag_names("insert")
+            ):
+                prev_cons = self.text.tag_prevrange("console", "insert")
+                if prev_cons and self.text.compare(prev_cons[1], ">=", prev[0]):
+                    prev = (prev_cons[1], prev[1])
+                next_cons = self.text.tag_nextrange("console", "insert")
+                if next_cons and self.text.compare(next_cons[0], "<", prev[1]):
+                    prev = (prev[0], self.text.index(next_cons[0] + "+1c"))
+                self.recall(self.text.get(prev[0], prev[1]), event)
+                return "break"
+            next = self.text.tag_nextrange("stdin", "insert")
+            if next and self.text.compare("insert lineend", ">=", next[0]):
+                next_cons = self.text.tag_nextrange("console", "insert lineend")
+                if next_cons and self.text.compare(next_cons[0], "<", next[1]):
+                    next = (next[0], self.text.index(next_cons[0] + "+1c"))
+                self.recall(self.text.get(next[0], next[1]), event)
+                return "break"
+            # No stdin mark -- just get the current line, less any prompt
+            indices = self.text.tag_nextrange("console", "insert linestart")
+            if indices and \
+               self.text.compare(indices[0], "<=", "insert linestart"):
+                self.recall(self.text.get(indices[1], "insert lineend"), event)
+            else:
+                self.recall(self.text.get("insert linestart", "insert lineend"), event)
+            return "break"
+        # If we're between the beginning of the line and the iomark, i.e.
+        # in the prompt area, move to the end of the prompt
+        if self.text.compare("insert", "<", "iomark"):
+            self.text.mark_set("insert", "iomark")
+        # If we're in the current input and there's only whitespace
+        # beyond the cursor, erase that whitespace first
+        s = self.text.get("insert", "end-1c")
+        if s and not s.strip():
+            self.text.delete("insert", "end-1c")
+        # If we're in the current input before its last line,
+        # insert a newline right at the insert point
+        if self.text.compare("insert", "<", "end-1c linestart"):
+            self.newline_and_indent_event(event)
+            return "break"
+        # We're in the last line; append a newline and submit it
+        self.text.mark_set("insert", "end-1c")
+        if self.reading:
+            self.text.insert("insert", "\n")
+            self.text.see("insert")
+        else:
+            self.newline_and_indent_event(event)
+        self.text.update_idletasks()
+        if self.reading:
+            self.top.quit() # Break out of recursive mainloop()
+        else:
+            self.runit()
+        return "break"
+
+    def recall(self, s, event):
+        # remove leading and trailing empty or whitespace lines
+        s = re.sub(r'^\s*\n', '', s)
+        s = re.sub(r'\n\s*$', '', s)
+        lines = s.split('\n')
+        self.text.undo_block_start()
+        try:
+            self.text.tag_remove("sel", "1.0", "end")
+            self.text.mark_set("insert", "end-1c")
+            prefix = self.text.get("insert linestart", "insert")
+            if prefix.rstrip().endswith(':'):
+                self.newline_and_indent_event(event)
+                prefix = self.text.get("insert linestart", "insert")
+            self.text.insert("insert", lines[0].strip(),
+                             self.user_input_insert_tags)
+            if len(lines) > 1:
+                orig_base_indent = re.search(r'^([ \t]*)', lines[0]).group(0)
+                new_base_indent  = re.search(r'^([ \t]*)', prefix).group(0)
+                for line in lines[1:]:
+                    if line.startswith(orig_base_indent):
+                        # replace orig base indentation with new indentation
+                        line = new_base_indent + line[len(orig_base_indent):]
+                    self.text.insert('insert', '\n' + line.rstrip(),
+                                     self.user_input_insert_tags)
+        finally:
+            self.text.see("insert")
+            self.text.undo_block_stop()
+
+    _last_newline_re = re.compile(r"[ \t]*(\n[ \t]*)?\z")
+    def runit(self):
+        index_before = self.text.index("end-2c")
+        line = self.text.get("iomark", "end-1c")
+        # Strip off last newline and surrounding whitespace.
+        # (To allow you to hit return twice to end a statement.)
+        line = self._last_newline_re.sub("", line)
+        input_is_complete = self.interp.runsource(line)
+        if not input_is_complete:
+            if self.text.get(index_before) == '\n':
+                self.text.tag_remove(self.user_input_insert_tags, index_before)
+            self.shell_sidebar.update_sidebar()
+
+    def open_stack_viewer(self, event=None):  # -n mode only
+        if self.interp.rpcclt:
+            return self.interp.remote_stack_viewer()
+
+        from idlelib.stackviewer import StackBrowser
+        try:
+            StackBrowser(self.root, sys.last_exc, self.flist)
+        except:
+            messagebox.showerror("No stack trace",
+                "There is no stack trace yet.\n"
+                "(sys.last_exc is not defined)",
+                parent=self.text)
+        return None
+
+    def view_restart_mark(self, event=None):
+        self.text.see("iomark")
+        self.text.see("restart")
+
+    def restart_shell(self, event=None):
+        "Callback for Run/Restart Shell Cntl-F6"
+        self.interp.restart_subprocess(with_cwd=True)
+
+    def showprompt(self):
+        self.resetoutput()
+
+        prompt = self.prompt
+        if self.sys_ps1 and prompt.endswith(self.sys_ps1):
+            prompt = prompt[:-len(self.sys_ps1)]
+        self.text.tag_add("console", "iomark-1c")
+        self.console.write(prompt)
+
+        self.shell_sidebar.update_sidebar()
+        self.text.mark_set("insert", "end-1c")
+        self.set_line_and_column()
+        self.io.reset_undo()
+
+    def show_warning(self, msg):
+        width = self.interp.tkconsole.width
+        wrapper = TextWrapper(width=width, tabsize=8, expand_tabs=True)
+        wrapped_msg = '\n'.join(wrapper.wrap(msg))
+        if not wrapped_msg.endswith('\n'):
+            wrapped_msg += '\n'
+        self.per.bottom.insert("iomark linestart", wrapped_msg, "stderr")
+
+    def resetoutput(self):
+        source = self.text.get("iomark", "end-1c")
+        if self.history:
+            self.history.store(source)
+        if self.text.get("end-2c") != "\n":
+            self.text.insert("end-1c", "\n")
+        self.text.mark_set("iomark", "end-1c")
+        self.set_line_and_column()
+        self.ctip.remove_calltip_window()
+
+    def write(self, s, tags=()):
+        try:
+            self.text.mark_gravity("iomark", "right")
+            count = OutputWindow.write(self, s, tags, "iomark")
+            self.text.mark_gravity("iomark", "left")
+        except:
+            raise ###pass  # ### 11Aug07 KBK if we are expecting exceptions
+                           # let's find out what they are and be specific.
+        if self.canceled:
+            self.canceled = False
+            if not use_subprocess:
+                raise KeyboardInterrupt
+        return count
+
+    def rmenu_check_cut(self):
+        try:
+            if self.text.compare('sel.first', '<', 'iomark'):
+                return 'disabled'
+        except TclError: # no selection, so the index 'sel.first' doesn't exist
+            return 'disabled'
+        return super().rmenu_check_cut()
+
+    def rmenu_check_paste(self):
+        if self.text.compare('insert','<','iomark'):
+            return 'disabled'
+        return super().rmenu_check_paste()
+
+    def squeeze_current_text_event(self, event=None):
+        self.squeezer.squeeze_current_text()
+        self.shell_sidebar.update_sidebar()
+
+    def on_squeezed_expand(self, index, text, tags):
+        self.shell_sidebar.update_sidebar()
+
+
+def fix_x11_paste(root):
+    "Make paste replace selection on x11.  See issue #5124."
+    if root._windowingsystem == 'x11':
+        for cls in 'Text', 'Entry', 'Spinbox':
+            root.bind_class(
+                cls,
+                '<<Paste>>',
+                'catch {%W delete sel.first sel.last}\n' +
+                        root.bind_class(cls, '<<Paste>>'))
+
+
+usage_msg = """\
+
+USAGE: idle  [-deins] [-t title] [file]*
+       idle  [-dns] [-t title] (-c cmd | -r file) [arg]*
+       idle  [-dns] [-t title] - [arg]*
+
+  -h         print this help message and exit
+  -n         run IDLE without a subprocess (DEPRECATED,
+             see Help/IDLE Help for details)
+
+The following options will override the IDLE 'settings' configuration:
+
+  -e         open an edit window
+  -i         open a shell window
+
+The following options imply -i and will open a shell:
+
+  -c cmd     run the command in a shell, or
+  -r file    run script from file
+
+  -d         enable the debugger
+  -s         run $IDLESTARTUP or $PYTHONSTARTUP before anything else
+  -t title   set title of shell window
+
+A default edit window will be bypassed when -c, -r, or - are used.
+
+[arg]* are passed to the command (-c) or script (-r) in sys.argv[1:].
+
+Examples:
+
+idle
+        Open an edit window or shell depending on IDLE's configuration.
+
+idle foo.py foobar.py
+        Edit the files, also open a shell if configured to start with shell.
+
+idle -est "Baz" foo.py
+        Run $IDLESTARTUP or $PYTHONSTARTUP, edit foo.py, and open a shell
+        window with the title "Baz".
+
+idle -c "import sys; print(sys.argv)" "foo"
+        Open a shell window and run the command, passing "-c" in sys.argv[0]
+        and "foo" in sys.argv[1].
+
+idle -d -s -r foo.py "Hello World"
+        Open a shell window, run a startup script, enable the debugger, and
+        run foo.py, passing "foo.py" in sys.argv[0] and "Hello World" in
+        sys.argv[1].
+
+echo "import sys; print(sys.argv)" | idle - "foobar"
+        Open a shell window, run the script piped in, passing '' in sys.argv[0]
+        and "foobar" in sys.argv[1].
+"""
+
+def main():
+    import getopt
+    from platform import system
+    from idlelib import testing  # bool value
+    from idlelib import macosx
+
+    global flist, root, use_subprocess
+
+    capture_warnings(True)
+    use_subprocess = True
+    enable_shell = False
+    enable_edit = False
+    debug = False
+    cmd = None
+    script = None
+    startup = False
+    try:
+        opts, args = getopt.getopt(sys.argv[1:], "c:deihnr:st:")
+    except getopt.error as msg:
+        print(f"Error: {msg}\n{usage_msg}", file=sys.stderr)
+        sys.exit(2)
+    for o, a in opts:
+        if o == '-c':
+            cmd = a
+            enable_shell = True
+        if o == '-d':
+            debug = True
+            enable_shell = True
+        if o == '-e':
+            enable_edit = True
+        if o == '-h':
+            sys.stdout.write(usage_msg)
+            sys.exit()
+        if o == '-i':
+            enable_shell = True
+        if o == '-n':
+            print(" Warning: running IDLE without a subprocess is deprecated.",
+                  file=sys.stderr)
+            use_subprocess = False
+        if o == '-r':
+            script = a
+            if os.path.isfile(script):
+                pass
+            else:
+                print("No script file: ", script)
+                sys.exit()
+            enable_shell = True
+        if o == '-s':
+            startup = True
+            enable_shell = True
+        if o == '-t':
+            PyShell.shell_title = a
+            enable_shell = True
+    if args and args[0] == '-':
+        cmd = sys.stdin.read()
+        enable_shell = True
+    # process sys.argv and sys.path:
+    for i in range(len(sys.path)):
+        sys.path[i] = os.path.abspath(sys.path[i])
+    if args and args[0] == '-':
+        sys.argv = [''] + args[1:]
+    elif cmd:
+        sys.argv = ['-c'] + args
+    elif script:
+        sys.argv = [script] + args
+    elif args:
+        enable_edit = True
+        pathx = []
+        for filename in args:
+            pathx.append(os.path.dirname(filename))
+        for dir in pathx:
+            dir = os.path.abspath(dir)
+            if not dir in sys.path:
+                sys.path.insert(0, dir)
+    else:
+        dir = os.getcwd()
+        if dir not in sys.path:
+            sys.path.insert(0, dir)
+    # check the IDLE settings configuration (but command line overrides)
+    edit_start = idleConf.GetOption('main', 'General',
+                                    'editor-on-startup', type='bool')
+    enable_edit = enable_edit or edit_start
+    enable_shell = enable_shell or not enable_edit
+
+    # Setup root.  Don't break user code run in IDLE process.
+    # Don't change environment when testing.
+    if use_subprocess and not testing:
+        NoDefaultRoot()
+    root = Tk(className="Idle")
+    root.withdraw()
+    from idlelib.run import fix_scaling
+    fix_scaling(root)
+
+    # set application icon
+    icondir = os.path.join(os.path.dirname(__file__), 'Icons')
+    if system() == 'Windows':
+        iconfile = os.path.join(icondir, 'idle.ico')
+        root.wm_iconbitmap(default=iconfile)
+    elif not macosx.isAquaTk():
+        if TkVersion >= 8.6:
+            ext = '.png'
+            sizes = (16, 32, 48, 256)
+        else:
+            ext = '.gif'
+            sizes = (16, 32, 48)
+        iconfiles = [os.path.join(icondir, 'idle_%d%s' % (size, ext))
+                     for size in sizes]
+        icons = [PhotoImage(master=root, file=iconfile)
+                 for iconfile in iconfiles]
+        root.wm_iconphoto(True, *icons)
+
+    # start editor and/or shell windows:
+    fixwordbreaks(root)
+    fix_x11_paste(root)
+    flist = PyShellFileList(root)
+    macosx.setupApp(root, flist)
+
+    if enable_edit:
+        if not (cmd or script):
+            for filename in args[:]:
+                if flist.open(filename) is None:
+                    # filename is a directory actually, disconsider it
+                    args.remove(filename)
+            if not args:
+                flist.new()
+
+    if enable_shell:
+        shell = flist.open_shell()
+        if not shell:
+            return # couldn't open shell
+        if macosx.isAquaTk() and flist.dict:
+            # On OSX: when the user has double-clicked on a file that causes
+            # IDLE to be launched the shell window will open just in front of
+            # the file she wants to see. Lower the interpreter window when
+            # there are open files.
+            shell.top.lower()
+    else:
+        shell = flist.pyshell
+
+    # Handle remaining options. If any of these are set, enable_shell
+    # was set also, so shell must be true to reach here.
+    if debug:
+        shell.open_debugger()
+    if startup:
+        filename = os.environ.get("IDLESTARTUP") or \
+                   os.environ.get("PYTHONSTARTUP")
+        if filename and os.path.isfile(filename):
+            shell.interp.execfile(filename)
+    if cmd or script:
+        shell.interp.runcommand("""if 1:
+            import sys as _sys
+            _sys.argv = {!r}
+            del _sys
+            \n""".format(sys.argv))
+        if cmd:
+            shell.interp.execsource(cmd)
+        elif script:
+            shell.interp.prepend_syspath(script)
+            shell.interp.execfile(script)
+    elif shell:
+        # If there is a shell window and no cmd or script in progress,
+        # check for problematic issues and print warning message(s) in
+        # the IDLE shell window; this is less intrusive than always
+        # opening a separate window.
+
+        # Warn if the "Prefer tabs when opening documents" system
+        # preference is set to "Always".
+        prefer_tabs_preference_warning = macosx.preferTabsPreferenceWarning()
+        if prefer_tabs_preference_warning:
+            shell.show_warning(prefer_tabs_preference_warning)
+
+    while flist.inversedict:  # keep IDLE running while files are open.
+        root.mainloop()
+    root.destroy()
+    capture_warnings(False)
+
+
+if __name__ == "__main__":
+    main()
+
+capture_warnings(False)  # Make sure turned off; see issue 18081
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/query.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/query.py
new file mode 100644
index 0000000000000000000000000000000000000000..5f9bdc031e544b7393a5a6b2ad888b25bcf49591
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/query.py
@@ -0,0 +1,390 @@
+"""
+Dialogs that query users and verify the answer before accepting.
+
+Query is the generic base class for a popup dialog.
+The user must either enter a valid answer or close the dialog.
+Entries are validated when <Return> is entered or [Ok] is clicked.
+Entries are ignored when [Cancel] or [X] are clicked.
+The 'return value' is .result set to either a valid answer or None.
+
+Subclass SectionName gets a name for a new config file section.
+Configdialog uses it for new highlight theme and keybinding set names.
+Subclass ModuleName gets a name for File => Open Module.
+Subclass HelpSource gets menu item and path for additions to Help menu.
+"""
+# Query and Section name result from splitting GetCfgSectionNameDialog
+# of configSectionNameDialog.py (temporarily config_sec.py) into
+# generic and specific parts.  3.6 only, July 2016.
+# ModuleName.entry_ok came from editor.EditorWindow.load_module.
+# HelpSource was extracted from configHelpSourceEdit.py (temporarily
+# config_help.py), with darwin code moved from ok to path_ok.
+
+import importlib.util, importlib.abc
+import os
+import shlex
+from sys import executable, platform  # Platform is set for one test.
+
+from tkinter import Toplevel, StringVar, BooleanVar, W, E, S
+from tkinter.ttk import Frame, Button, Entry, Label, Checkbutton
+from tkinter import filedialog
+from tkinter.font import Font
+from tkinter.simpledialog import _setup_dialog
+
+class Query(Toplevel):
+    """Base class for getting verified answer from a user.
+
+    For this base class, accept any non-blank string.
+    """
+    def __init__(self, parent, title, message, *, text0='', used_names={},
+                 _htest=False, _utest=False):
+        """Create modal popup, return when destroyed.
+
+        Additional subclass init must be done before this unless
+        _utest=True is passed to suppress wait_window().
+
+        title - string, title of popup dialog
+        message - string, informational message to display
+        text0 - initial value for entry
+        used_names - names already in use
+        _htest - bool, change box location when running htest
+        _utest - bool, leave window hidden and not modal
+        """
+        self.parent = parent  # Needed for Font call.
+        self.message = message
+        self.text0 = text0
+        self.used_names = used_names
+
+        Toplevel.__init__(self, parent)
+        self.withdraw()  # Hide while configuring, especially geometry.
+        self.title(title)
+        self.transient(parent)
+        if not _utest:  # Otherwise fail when directly run unittest.
+            self.grab_set()
+
+        _setup_dialog(self)
+        if self._windowingsystem == 'aqua':
+            self.bind("<Command-.>", self.cancel)
+        self.bind('<Key-Escape>', self.cancel)
+        self.protocol("WM_DELETE_WINDOW", self.cancel)
+        self.bind('<Key-Return>', self.ok)
+        self.bind("<KP_Enter>", self.ok)
+
+        self.create_widgets()
+        self.update_idletasks()  # Need here for winfo_reqwidth below.
+        self.geometry(  # Center dialog over parent (or below htest box).
+                "+%d+%d" % (
+                    parent.winfo_rootx() +
+                    (parent.winfo_width()/2 - self.winfo_reqwidth()/2),
+                    parent.winfo_rooty() +
+                    ((parent.winfo_height()/2 - self.winfo_reqheight()/2)
+                    if not _htest else 150)
+                ) )
+        self.resizable(height=False, width=False)
+
+        if not _utest:
+            self.deiconify()  # Unhide now that geometry set.
+            self.entry.focus_set()
+            self.wait_window()
+
+    def create_widgets(self, ok_text='OK'):  # Do not replace.
+        """Create entry (rows, extras, buttons.
+
+        Entry stuff on rows 0-2, spanning cols 0-2.
+        Buttons on row 99, cols 1, 2.
+        """
+        # Bind to self the widgets needed for entry_ok or unittest.
+        self.frame = frame = Frame(self, padding=10)
+        frame.grid(column=0, row=0, sticky='news')
+        frame.grid_columnconfigure(0, weight=1)
+
+        entrylabel = Label(frame, anchor='w', justify='left',
+                           text=self.message)
+        self.entryvar = StringVar(self, self.text0)
+        self.entry = Entry(frame, width=30, textvariable=self.entryvar)
+        self.error_font = Font(name='TkCaptionFont',
+                               exists=True, root=self.parent)
+        self.entry_error = Label(frame, text=' ', foreground='red',
+                                 font=self.error_font)
+        # Display or blank error by setting ['text'] =.
+        entrylabel.grid(column=0, row=0, columnspan=3, padx=5, sticky=W)
+        self.entry.grid(column=0, row=1, columnspan=3, padx=5, sticky=W+E,
+                        pady=[10,0])
+        self.entry_error.grid(column=0, row=2, columnspan=3, padx=5,
+                              sticky=W+E)
+
+        self.create_extra()
+
+        self.button_ok = Button(
+                frame, text=ok_text, default='active', command=self.ok)
+        self.button_cancel = Button(
+                frame, text='Cancel', command=self.cancel)
+
+        self.button_ok.grid(column=1, row=99, padx=5)
+        self.button_cancel.grid(column=2, row=99, padx=5)
+
+    def create_extra(self): pass  # Override to add widgets.
+
+    def showerror(self, message, widget=None):
+        #self.bell(displayof=self)
+        (widget or self.entry_error)['text'] = 'ERROR: ' + message
+
+    def entry_ok(self):  # Example: usually replace.
+        "Return non-blank entry or None."
+        entry = self.entry.get().strip()
+        if not entry:
+            self.showerror('blank line.')
+            return None
+        return entry
+
+    def ok(self, event=None):  # Do not replace.
+        '''If entry is valid, bind it to 'result' and destroy tk widget.
+
+        Otherwise leave dialog open for user to correct entry or cancel.
+        '''
+        self.entry_error['text'] = ''
+        entry = self.entry_ok()
+        if entry is not None:
+            self.result = entry
+            self.destroy()
+        else:
+            # [Ok] moves focus.  (<Return> does not.)  Move it back.
+            self.entry.focus_set()
+
+    def cancel(self, event=None):  # Do not replace.
+        "Set dialog result to None and destroy tk widget."
+        self.result = None
+        self.destroy()
+
+    def destroy(self):
+        self.grab_release()
+        super().destroy()
+
+
+class SectionName(Query):
+    "Get a name for a config file section name."
+    # Used in ConfigDialog.GetNewKeysName, .GetNewThemeName (837)
+
+    def __init__(self, parent, title, message, used_names,
+                 *, _htest=False, _utest=False):
+        super().__init__(parent, title, message, used_names=used_names,
+                         _htest=_htest, _utest=_utest)
+
+    def entry_ok(self):
+        "Return sensible ConfigParser section name or None."
+        name = self.entry.get().strip()
+        if not name:
+            self.showerror('no name specified.')
+            return None
+        elif len(name)>30:
+            self.showerror('name is longer than 30 characters.')
+            return None
+        elif name in self.used_names:
+            self.showerror('name is already in use.')
+            return None
+        return name
+
+
+class ModuleName(Query):
+    "Get a module name for Open Module menu entry."
+    # Used in open_module (editor.EditorWindow until move to iobinding).
+
+    def __init__(self, parent, title, message, text0,
+                 *, _htest=False, _utest=False):
+        super().__init__(parent, title, message, text0=text0,
+                       _htest=_htest, _utest=_utest)
+
+    def entry_ok(self):
+        "Return entered module name as file path or None."
+        name = self.entry.get().strip()
+        if not name:
+            self.showerror('no name specified.')
+            return None
+        # XXX Ought to insert current file's directory in front of path.
+        try:
+            spec = importlib.util.find_spec(name)
+        except (ValueError, ImportError) as msg:
+            self.showerror(str(msg))
+            return None
+        if spec is None:
+            self.showerror("module not found.")
+            return None
+        if not isinstance(spec.loader, importlib.abc.SourceLoader):
+            self.showerror("not a source-based module.")
+            return None
+        try:
+            file_path = spec.loader.get_filename(name)
+        except AttributeError:
+            self.showerror("loader does not support get_filename.")
+            return None
+        except ImportError:
+            # Some special modules require this (e.g. os.path)
+            try:
+                file_path = spec.loader.get_filename()
+            except TypeError:
+                self.showerror("loader failed to get filename.")
+                return None
+        return file_path
+
+
+class Goto(Query):
+    "Get a positive line number for editor Go To Line."
+    # Used in editor.EditorWindow.goto_line_event.
+
+    def entry_ok(self):
+        try:
+            lineno = int(self.entry.get())
+        except ValueError:
+            self.showerror('not a base 10 integer.')
+            return None
+        if lineno <= 0:
+            self.showerror('not a positive integer.')
+            return None
+        return lineno
+
+
+class HelpSource(Query):
+    "Get menu name and help source for Help menu."
+    # Used in ConfigDialog.HelpListItemAdd/Edit, (941/9)
+
+    def __init__(self, parent, title, *, menuitem='', filepath='',
+                 used_names={}, _htest=False, _utest=False):
+        """Get menu entry and url/local file for Additional Help.
+
+        User enters a name for the Help resource and a web url or file
+        name. The user can browse for the file.
+        """
+        self.filepath = filepath
+        message = 'Name for item on Help menu:'
+        super().__init__(
+                parent, title, message, text0=menuitem,
+                used_names=used_names, _htest=_htest, _utest=_utest)
+
+    def create_extra(self):
+        "Add path widjets to rows 10-12."
+        frame = self.frame
+        pathlabel = Label(frame, anchor='w', justify='left',
+                          text='Help File Path: Enter URL or browse for file')
+        self.pathvar = StringVar(self, self.filepath)
+        self.path = Entry(frame, textvariable=self.pathvar, width=40)
+        browse = Button(frame, text='Browse', width=8,
+                        command=self.browse_file)
+        self.path_error = Label(frame, text=' ', foreground='red',
+                                font=self.error_font)
+
+        pathlabel.grid(column=0, row=10, columnspan=3, padx=5, pady=[10,0],
+                       sticky=W)
+        self.path.grid(column=0, row=11, columnspan=2, padx=5, sticky=W+E,
+                       pady=[10,0])
+        browse.grid(column=2, row=11, padx=5, sticky=W+S)
+        self.path_error.grid(column=0, row=12, columnspan=3, padx=5,
+                             sticky=W+E)
+
+    def askfilename(self, filetypes, initdir, initfile):  # htest #
+        # Extracted from browse_file so can mock for unittests.
+        # Cannot unittest as cannot simulate button clicks.
+        # Test by running htest, such as by running this file.
+        return filedialog.Open(parent=self, filetypes=filetypes)\
+               .show(initialdir=initdir, initialfile=initfile)
+
+    def browse_file(self):
+        filetypes = [
+            ("HTML Files", "*.htm *.html", "TEXT"),
+            ("Text Files", "*.txt", "TEXT"),
+            ("All Files", "*")]
+        path = self.pathvar.get()
+        if path:
+            dir, base = os.path.split(path)
+        else:
+            base = None
+            if platform[:3] == 'win':
+                dir = os.path.join(os.path.dirname(executable), 'Doc')
+                if not os.path.isdir(dir):
+                    dir = os.getcwd()
+            else:
+                dir = os.getcwd()
+        file = self.askfilename(filetypes, dir, base)
+        if file:
+            self.pathvar.set(file)
+
+    item_ok = SectionName.entry_ok  # localize for test override
+
+    def path_ok(self):
+        "Simple validity check for menu file path"
+        path = self.path.get().strip()
+        if not path: #no path specified
+            self.showerror('no help file path specified.', self.path_error)
+            return None
+        elif not path.startswith(('www.', 'http')):
+            if path[:5] == 'file:':
+                path = path[5:]
+            if not os.path.exists(path):
+                self.showerror('help file path does not exist.',
+                               self.path_error)
+                return None
+            if platform == 'darwin':  # for Mac Safari
+                path =  "file://" + path
+        return path
+
+    def entry_ok(self):
+        "Return apparently valid (name, path) or None"
+        self.path_error['text'] = ''
+        name = self.item_ok()
+        path = self.path_ok()
+        return None if name is None or path is None else (name, path)
+
+class CustomRun(Query):
+    """Get settings for custom run of module.
+
+    1. Command line arguments to extend sys.argv.
+    2. Whether to restart Shell or not.
+    """
+    # Used in runscript.run_custom_event
+
+    def __init__(self, parent, title, *, cli_args=[],
+                 _htest=False, _utest=False):
+        """cli_args is a list of strings.
+
+        The list is assigned to the default Entry StringVar.
+        The strings are displayed joined by ' ' for display.
+        """
+        message = 'Command Line Arguments for sys.argv:'
+        super().__init__(
+                parent, title, message, text0=cli_args,
+                _htest=_htest, _utest=_utest)
+
+    def create_extra(self):
+        "Add run mode on rows 10-12."
+        frame = self.frame
+        self.restartvar = BooleanVar(self, value=True)
+        restart = Checkbutton(frame, variable=self.restartvar, onvalue=True,
+                              offvalue=False, text='Restart shell')
+        self.args_error = Label(frame, text=' ', foreground='red',
+                                font=self.error_font)
+
+        restart.grid(column=0, row=10, columnspan=3, padx=5, sticky='w')
+        self.args_error.grid(column=0, row=12, columnspan=3, padx=5,
+                             sticky='we')
+
+    def cli_args_ok(self):
+        "Return command line arg list or None if error."
+        cli_string = self.entry.get().strip()
+        try:
+            cli_args = shlex.split(cli_string, posix=True)
+        except ValueError as err:
+            self.showerror(str(err))
+            return None
+        return cli_args
+
+    def entry_ok(self):
+        "Return apparently valid (cli_args, restart) or None."
+        cli_args = self.cli_args_ok()
+        restart = self.restartvar.get()
+        return None if cli_args is None else (cli_args, restart)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_query', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(Query, HelpSource, CustomRun)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/redirector.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/redirector.py
new file mode 100644
index 0000000000000000000000000000000000000000..8e2ba68d3815bf04c58c1fee0f7c9db790eef0c1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/redirector.py
@@ -0,0 +1,174 @@
+from tkinter import TclError
+
+class WidgetRedirector:
+    """Support for redirecting arbitrary widget subcommands.
+
+    Some Tk operations don't normally pass through tkinter.  For example, if a
+    character is inserted into a Text widget by pressing a key, a default Tk
+    binding to the widget's 'insert' operation is activated, and the Tk library
+    processes the insert without calling back into tkinter.
+
+    Although a binding to <Key> could be made via tkinter, what we really want
+    to do is to hook the Tk 'insert' operation itself.  For one thing, we want
+    a text.insert call in idle code to have the same effect as a key press.
+
+    When a widget is instantiated, a Tcl command is created whose name is the
+    same as the pathname widget._w.  This command is used to invoke the various
+    widget operations, e.g. insert (for a Text widget). We are going to hook
+    this command and provide a facility ('register') to intercept the widget
+    operation.  We will also intercept method calls on the tkinter class
+    instance that represents the tk widget.
+
+    In IDLE, WidgetRedirector is used in Percolator to intercept Text
+    commands.  The function being registered provides access to the top
+    of a Percolator chain.  At the bottom of the chain is a call to the
+    original Tk widget operation.
+    """
+    def __init__(self, widget):
+        '''Initialize attributes and setup redirection.
+
+        _operations: dict mapping operation name to new function.
+        widget: the widget whose tcl command is to be intercepted.
+        tk: widget.tk, a convenience attribute, probably not needed.
+        orig: new name of the original tcl command.
+
+        Since renaming to orig fails with TclError when orig already
+        exists, only one WidgetDirector can exist for a given widget.
+        '''
+        self._operations = {}
+        self.widget = widget            # widget instance
+        self.tk = tk = widget.tk        # widget's root
+        w = widget._w                   # widget's (full) Tk pathname
+        self.orig = w + "_orig"
+        # Rename the Tcl command within Tcl:
+        tk.call("rename", w, self.orig)
+        # Create a new Tcl command whose name is the widget's pathname, and
+        # whose action is to dispatch on the operation passed to the widget:
+        tk.createcommand(w, self.dispatch)
+
+    def __repr__(self):
+        w = self.widget
+        return f"{self.__class__.__name__,}({w.__class__.__name__}<{w._w}>)"
+
+    def close(self):
+        "Unregister operations and revert redirection created by .__init__."
+        for operation in list(self._operations):
+            self.unregister(operation)
+        widget = self.widget
+        tk = widget.tk
+        w = widget._w
+        # Restore the original widget Tcl command.
+        tk.deletecommand(w)
+        tk.call("rename", self.orig, w)
+        del self.widget, self.tk  # Should not be needed
+        # if instance is deleted after close, as in Percolator.
+
+    def register(self, operation, function):
+        '''Return OriginalCommand(operation) after registering function.
+
+        Registration adds an operation: function pair to ._operations.
+        It also adds a widget function attribute that masks the tkinter
+        class instance method.  Method masking operates independently
+        from command dispatch.
+
+        If a second function is registered for the same operation, the
+        first function is replaced in both places.
+        '''
+        self._operations[operation] = function
+        setattr(self.widget, operation, function)
+        return OriginalCommand(self, operation)
+
+    def unregister(self, operation):
+        '''Return the function for the operation, or None.
+
+        Deleting the instance attribute unmasks the class attribute.
+        '''
+        if operation in self._operations:
+            function = self._operations[operation]
+            del self._operations[operation]
+            try:
+                delattr(self.widget, operation)
+            except AttributeError:
+                pass
+            return function
+        else:
+            return None
+
+    def dispatch(self, operation, *args):
+        '''Callback from Tcl which runs when the widget is referenced.
+
+        If an operation has been registered in self._operations, apply the
+        associated function to the args passed into Tcl. Otherwise, pass the
+        operation through to Tk via the original Tcl function.
+
+        Note that if a registered function is called, the operation is not
+        passed through to Tk.  Apply the function returned by self.register()
+        to *args to accomplish that.  For an example, see colorizer.py.
+
+        '''
+        operation = str(operation)  # can be a Tcl_Obj
+        m = self._operations.get(operation)
+        try:
+            if m:
+                return m(*args)
+            else:
+                return self.tk.call((self.orig, operation) + args)
+        except TclError:
+            return ""
+
+
+class OriginalCommand:
+    '''Callable for original tk command that has been redirected.
+
+    Returned by .register; can be used in the function registered.
+    redir = WidgetRedirector(text)
+    def my_insert(*args):
+        print("insert", args)
+        original_insert(*args)
+    original_insert = redir.register("insert", my_insert)
+    '''
+
+    def __init__(self, redir, operation):
+        '''Create .tk_call and .orig_and_operation for .__call__ method.
+
+        .redir and .operation store the input args for __repr__.
+        .tk and .orig copy attributes of .redir (probably not needed).
+        '''
+        self.redir = redir
+        self.operation = operation
+        self.tk = redir.tk  # redundant with self.redir
+        self.orig = redir.orig  # redundant with self.redir
+        # These two could be deleted after checking recipient code.
+        self.tk_call = redir.tk.call
+        self.orig_and_operation = (redir.orig, operation)
+
+    def __repr__(self):
+        return f"{self.__class__.__name__,}({self.redir!r}, {self.operation!r})"
+
+    def __call__(self, *args):
+        return self.tk_call(self.orig_and_operation + args)
+
+
+def _widget_redirector(parent):  # htest #
+    from tkinter import Toplevel, Text
+
+    top = Toplevel(parent)
+    top.title("Test WidgetRedirector")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+    text = Text(top)
+    text.pack()
+    text.focus_set()
+    redir = WidgetRedirector(text)
+    def my_insert(*args):
+        print("insert", args)
+        original_insert(*args)
+    original_insert = redir.register("insert", my_insert)
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_redirector', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_widget_redirector)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/replace.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/replace.py
new file mode 100644
index 0000000000000000000000000000000000000000..3716d841568d30930eea40840fba260792adedb9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/replace.py
@@ -0,0 +1,299 @@
+"""Replace dialog for IDLE. Inherits SearchDialogBase for GUI.
+Uses idlelib.searchengine.SearchEngine for search capability.
+Defines various replace related functions like replace, replace all,
+and replace+find.
+"""
+import re
+
+from tkinter import StringVar, TclError
+
+from idlelib.searchbase import SearchDialogBase
+from idlelib import searchengine
+
+
+def replace(text, insert_tags=None):
+    """Create or reuse a singleton ReplaceDialog instance.
+
+    The singleton dialog saves user entries and preferences
+    across instances.
+
+    Args:
+        text: Text widget containing the text to be searched.
+    """
+    root = text._root()
+    engine = searchengine.get(root)
+    if not hasattr(engine, "_replacedialog"):
+        engine._replacedialog = ReplaceDialog(root, engine)
+    dialog = engine._replacedialog
+    searchphrase = text.get("sel.first", "sel.last")
+    dialog.open(text, searchphrase, insert_tags=insert_tags)
+
+
+class ReplaceDialog(SearchDialogBase):
+    "Dialog for finding and replacing a pattern in text."
+
+    title = "Replace Dialog"
+    icon = "Replace"
+
+    def __init__(self, root, engine):
+        """Create search dialog for finding and replacing text.
+
+        Uses SearchDialogBase as the basis for the GUI and a
+        searchengine instance to prepare the search.
+
+        Attributes:
+            replvar: StringVar containing 'Replace with:' value.
+            replent: Entry widget for replvar.  Created in
+                create_entries().
+            ok: Boolean used in searchengine.search_text to indicate
+                whether the search includes the selection.
+        """
+        super().__init__(root, engine)
+        self.replvar = StringVar(root)
+        self.insert_tags = None
+
+    def open(self, text, searchphrase=None, *, insert_tags=None):
+        """Make dialog visible on top of others and ready to use.
+
+        Also, set the search to include the current selection
+        (self.ok).
+
+        Args:
+            text: Text widget being searched.
+            searchphrase: String phrase to search.
+        """
+        SearchDialogBase.open(self, text, searchphrase)
+        self.ok = True
+        self.insert_tags = insert_tags
+
+    def create_entries(self):
+        "Create base and additional label and text entry widgets."
+        SearchDialogBase.create_entries(self)
+        self.replent = self.make_entry("Replace with:", self.replvar)[0]
+
+    def create_command_buttons(self):
+        """Create base and additional command buttons.
+
+        The additional buttons are for Find, Replace,
+        Replace+Find, and Replace All.
+        """
+        SearchDialogBase.create_command_buttons(self)
+        self.make_button("Find", self.find_it)
+        self.make_button("Replace", self.replace_it)
+        self.make_button("Replace+Find", self.default_command, isdef=True)
+        self.make_button("Replace All", self.replace_all)
+
+    def find_it(self, event=None):
+        "Handle the Find button."
+        self.do_find(False)
+
+    def replace_it(self, event=None):
+        """Handle the Replace button.
+
+        If the find is successful, then perform replace.
+        """
+        if self.do_find(self.ok):
+            self.do_replace()
+
+    def default_command(self, event=None):
+        """Handle the Replace+Find button as the default command.
+
+        First performs a replace and then, if the replace was
+        successful, a find next.
+        """
+        if self.do_find(self.ok):
+            if self.do_replace():  # Only find next match if replace succeeded.
+                                   # A bad re can cause it to fail.
+                self.do_find(False)
+
+    def _replace_expand(self, m, repl):
+        "Expand replacement text if regular expression."
+        if self.engine.isre():
+            try:
+                new = m.expand(repl)
+            except re.PatternError:
+                self.engine.report_error(repl, 'Invalid Replace Expression')
+                new = None
+        else:
+            new = repl
+
+        return new
+
+    def replace_all(self, event=None):
+        """Handle the Replace All button.
+
+        Search text for occurrences of the Find value and replace
+        each of them.  The 'wrap around' value controls the start
+        point for searching.  If wrap isn't set, then the searching
+        starts at the first occurrence after the current selection;
+        if wrap is set, the replacement starts at the first line.
+        The replacement is always done top-to-bottom in the text.
+        """
+        prog = self.engine.getprog()
+        if not prog:
+            return
+        repl = self.replvar.get()
+        text = self.text
+        res = self.engine.search_text(text, prog)
+        if not res:
+            self.bell()
+            return
+        text.tag_remove("sel", "1.0", "end")
+        text.tag_remove("hit", "1.0", "end")
+        line = res[0]
+        col = res[1].start()
+        if self.engine.iswrap():
+            line = 1
+            col = 0
+        ok = True
+        first = last = None
+        # XXX ought to replace circular instead of top-to-bottom when wrapping
+        text.undo_block_start()
+        while res := self.engine.search_forward(
+                text, prog, line, col, wrap=False, ok=ok):
+            line, m = res
+            chars = text.get("%d.0" % line, "%d.0" % (line+1))
+            orig = m.group()
+            new = self._replace_expand(m, repl)
+            if new is None:
+                break
+            i, j = m.span()
+            first = "%d.%d" % (line, i)
+            last = "%d.%d" % (line, j)
+            if new == orig:
+                text.mark_set("insert", last)
+            else:
+                text.mark_set("insert", first)
+                if first != last:
+                    text.delete(first, last)
+                if new:
+                    text.insert(first, new, self.insert_tags)
+            col = i + len(new)
+            ok = False
+        text.undo_block_stop()
+        if first and last:
+            self.show_hit(first, last)
+        self.close()
+
+    def do_find(self, ok=False):
+        """Search for and highlight next occurrence of pattern in text.
+
+        No text replacement is done with this option.
+        """
+        if not self.engine.getprog():
+            return False
+        text = self.text
+        res = self.engine.search_text(text, None, ok)
+        if not res:
+            self.bell()
+            return False
+        line, m = res
+        i, j = m.span()
+        first = "%d.%d" % (line, i)
+        last = "%d.%d" % (line, j)
+        self.show_hit(first, last)
+        self.ok = True
+        return True
+
+    def do_replace(self):
+        "Replace search pattern in text with replacement value."
+        prog = self.engine.getprog()
+        if not prog:
+            return False
+        text = self.text
+        try:
+            first = pos = text.index("sel.first")
+            last = text.index("sel.last")
+        except TclError:
+            pos = None
+        if not pos:
+            first = last = pos = text.index("insert")
+        line, col = searchengine.get_line_col(pos)
+        chars = text.get("%d.0" % line, "%d.0" % (line+1))
+        m = prog.match(chars, col)
+        if not prog:
+            return False
+        new = self._replace_expand(m, self.replvar.get())
+        if new is None:
+            return False
+        text.mark_set("insert", first)
+        text.undo_block_start()
+        if m.group():
+            text.delete(first, last)
+        if new:
+            text.insert(first, new, self.insert_tags)
+        text.undo_block_stop()
+        self.show_hit(first, text.index("insert"))
+        self.ok = False
+        return True
+
+    def show_hit(self, first, last):
+        """Highlight text between first and last indices.
+
+        Text is highlighted via the 'hit' tag and the marked
+        section is brought into view.
+
+        The colors from the 'hit' tag aren't currently shown
+        when the text is displayed.  This is due to the 'sel'
+        tag being added first, so the colors in the 'sel'
+        config are seen instead of the colors for 'hit'.
+        """
+        text = self.text
+        text.mark_set("insert", first)
+        text.tag_remove("sel", "1.0", "end")
+        text.tag_add("sel", first, last)
+        text.tag_remove("hit", "1.0", "end")
+        if first == last:
+            text.tag_add("hit", first)
+        else:
+            text.tag_add("hit", first, last)
+        text.see("insert")
+        text.update_idletasks()
+
+    def close(self, event=None):
+        "Close the dialog and remove hit tags."
+        SearchDialogBase.close(self, event)
+        self.text.tag_remove("hit", "1.0", "end")
+        self.insert_tags = None
+
+
+def _replace_dialog(parent):  # htest #
+    from tkinter import Toplevel, Text, END, SEL
+    from tkinter.ttk import Frame, Button
+
+    top = Toplevel(parent)
+    top.title("Test ReplaceDialog")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+
+    # mock undo delegator methods
+    def undo_block_start():
+        pass
+
+    def undo_block_stop():
+        pass
+
+    frame = Frame(top)
+    frame.pack()
+    text = Text(frame, inactiveselectbackground='gray')
+    text.undo_block_start = undo_block_start
+    text.undo_block_stop = undo_block_stop
+    text.pack()
+    text.insert("insert","This is a sample sTring\nPlus MORE.")
+    text.focus_set()
+
+    def show_replace():
+        text.tag_add(SEL, "1.0", END)
+        replace(text)
+        text.tag_remove(SEL, "1.0", END)
+
+    button = Button(frame, text="Replace", command=show_replace)
+    button.pack()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_replace', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_replace_dialog)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/rpc.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/rpc.py
new file mode 100644
index 0000000000000000000000000000000000000000..3f0b2230dd185d7323698e0e7c12a58fa2ce3884
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/rpc.py
@@ -0,0 +1,635 @@
+"""RPC Implementation, originally written for the Python Idle IDE
+
+For security reasons, GvR requested that Idle's Python execution server process
+connect to the Idle process, which listens for the connection.  Since Idle has
+only one client per server, this was not a limitation.
+
+   +---------------------------------+ +-------------+
+   | socketserver.BaseRequestHandler | | SocketIO    |
+   +---------------------------------+ +-------------+
+                   ^                   | register()  |
+                   |                   | unregister()|
+                   |                   +-------------+
+                   |                      ^  ^
+                   |                      |  |
+                   | + -------------------+  |
+                   | |                       |
+   +-------------------------+        +-----------------+
+   | RPCHandler              |        | RPCClient       |
+   | [attribute of RPCServer]|        |                 |
+   +-------------------------+        +-----------------+
+
+The RPCServer handler class is expected to provide register/unregister methods.
+RPCHandler inherits the mix-in class SocketIO, which provides these methods.
+
+See the Idle run.main() docstring for further information on how this was
+accomplished in Idle.
+
+"""
+import builtins
+import copyreg
+import io
+import marshal
+import os
+import pickle
+import queue
+import select
+import socket
+import socketserver
+import struct
+import sys
+import threading
+import traceback
+import types
+
+def unpickle_code(ms):
+    "Return code object from marshal string ms."
+    co = marshal.loads(ms)
+    assert isinstance(co, types.CodeType)
+    return co
+
+def pickle_code(co):
+    "Return unpickle function and tuple with marshalled co code object."
+    assert isinstance(co, types.CodeType)
+    ms = marshal.dumps(co)
+    return unpickle_code, (ms,)
+
+def dumps(obj, protocol=None):
+    "Return pickled (or marshalled) string for obj."
+    # IDLE passes 'None' to select pickle.DEFAULT_PROTOCOL.
+    f = io.BytesIO()
+    p = CodePickler(f, protocol)
+    p.dump(obj)
+    return f.getvalue()
+
+
+class CodePickler(pickle.Pickler):
+    dispatch_table = {types.CodeType: pickle_code, **copyreg.dispatch_table}
+
+
+BUFSIZE = 8*1024
+LOCALHOST = '127.0.0.1'
+
+class RPCServer(socketserver.TCPServer):
+
+    def __init__(self, addr, handlerclass=None):
+        if handlerclass is None:
+            handlerclass = RPCHandler
+        socketserver.TCPServer.__init__(self, addr, handlerclass)
+
+    def server_bind(self):
+        "Override TCPServer method, no bind() phase for connecting entity"
+        pass
+
+    def server_activate(self):
+        """Override TCPServer method, connect() instead of listen()
+
+        Due to the reversed connection, self.server_address is actually the
+        address of the Idle Client to which we are connecting.
+
+        """
+        self.socket.connect(self.server_address)
+
+    def get_request(self):
+        "Override TCPServer method, return already connected socket"
+        return self.socket, self.server_address
+
+    def handle_error(self, request, client_address):
+        """Override TCPServer method
+
+        Error message goes to __stderr__.  No error message if exiting
+        normally or socket raised EOF.  Other exceptions not handled in
+        server code will cause os._exit.
+
+        """
+        try:
+            raise
+        except SystemExit:
+            raise
+        except:
+            erf = sys.__stderr__
+            print('\n' + '-'*40, file=erf)
+            print('Unhandled server exception!', file=erf)
+            print('Thread: %s' % threading.current_thread().name, file=erf)
+            print('Client Address: ', client_address, file=erf)
+            print('Request: ', repr(request), file=erf)
+            traceback.print_exc(file=erf)
+            print('\n*** Unrecoverable, server exiting!', file=erf)
+            print('-'*40, file=erf)
+            os._exit(0)
+
+#----------------- end class RPCServer --------------------
+
+objecttable = {}
+request_queue = queue.Queue(0)
+response_queue = queue.Queue(0)
+
+
+class SocketIO:
+
+    nextseq = 0
+
+    def __init__(self, sock, objtable=None, debugging=None):
+        self.sockthread = threading.current_thread()
+        if debugging is not None:
+            self.debugging = debugging
+        self.sock = sock
+        if objtable is None:
+            objtable = objecttable
+        self.objtable = objtable
+        self.responses = {}
+        self.cvars = {}
+
+    def close(self):
+        sock = self.sock
+        self.sock = None
+        if sock is not None:
+            sock.close()
+
+    def exithook(self):
+        "override for specific exit action"
+        os._exit(0)
+
+    def debug(self, *args):
+        if not self.debugging:
+            return
+        s = self.location + " " + str(threading.current_thread().name)
+        for a in args:
+            s = s + " " + str(a)
+        print(s, file=sys.__stderr__)
+
+    def register(self, oid, object_):
+        self.objtable[oid] = object_
+
+    def unregister(self, oid):
+        try:
+            del self.objtable[oid]
+        except KeyError:
+            pass
+
+    def localcall(self, seq, request):
+        self.debug("localcall:", request)
+        try:
+            how, (oid, methodname, args, kwargs) = request
+        except TypeError:
+            return ("ERROR", "Bad request format")
+        if oid not in self.objtable:
+            return ("ERROR", f"Unknown object id: {oid!r}")
+        obj = self.objtable[oid]
+        if methodname == "__methods__":
+            methods = {}
+            _getmethods(obj, methods)
+            return ("OK", methods)
+        if methodname == "__attributes__":
+            attributes = {}
+            _getattributes(obj, attributes)
+            return ("OK", attributes)
+        if not hasattr(obj, methodname):
+            return ("ERROR", f"Unsupported method name: {methodname!r}")
+        method = getattr(obj, methodname)
+        try:
+            if how == 'CALL':
+                ret = method(*args, **kwargs)
+                if isinstance(ret, RemoteObject):
+                    ret = remoteref(ret)
+                return ("OK", ret)
+            elif how == 'QUEUE':
+                request_queue.put((seq, (method, args, kwargs)))
+                return("QUEUED", None)
+            else:
+                return ("ERROR", "Unsupported message type: %s" % how)
+        except SystemExit:
+            raise
+        except KeyboardInterrupt:
+            raise
+        except OSError:
+            raise
+        except Exception as ex:
+            return ("CALLEXC", ex)
+        except:
+            msg = "*** Internal Error: rpc.py:SocketIO.localcall()\n\n"\
+                  " Object: %s \n Method: %s \n Args: %s\n"
+            print(msg % (oid, method, args), file=sys.__stderr__)
+            traceback.print_exc(file=sys.__stderr__)
+            return ("EXCEPTION", None)
+
+    def remotecall(self, oid, methodname, args, kwargs):
+        self.debug("remotecall:asynccall: ", oid, methodname)
+        seq = self.asynccall(oid, methodname, args, kwargs)
+        return self.asyncreturn(seq)
+
+    def remotequeue(self, oid, methodname, args, kwargs):
+        self.debug("remotequeue:asyncqueue: ", oid, methodname)
+        seq = self.asyncqueue(oid, methodname, args, kwargs)
+        return self.asyncreturn(seq)
+
+    def asynccall(self, oid, methodname, args, kwargs):
+        request = ("CALL", (oid, methodname, args, kwargs))
+        seq = self.newseq()
+        if threading.current_thread() != self.sockthread:
+            cvar = threading.Condition()
+            self.cvars[seq] = cvar
+        self.debug(("asynccall:%d:" % seq), oid, methodname, args, kwargs)
+        self.putmessage((seq, request))
+        return seq
+
+    def asyncqueue(self, oid, methodname, args, kwargs):
+        request = ("QUEUE", (oid, methodname, args, kwargs))
+        seq = self.newseq()
+        if threading.current_thread() != self.sockthread:
+            cvar = threading.Condition()
+            self.cvars[seq] = cvar
+        self.debug(("asyncqueue:%d:" % seq), oid, methodname, args, kwargs)
+        self.putmessage((seq, request))
+        return seq
+
+    def asyncreturn(self, seq):
+        self.debug("asyncreturn:%d:call getresponse(): " % seq)
+        response = self.getresponse(seq, wait=0.05)
+        self.debug(("asyncreturn:%d:response: " % seq), response)
+        return self.decoderesponse(response)
+
+    def decoderesponse(self, response):
+        how, what = response
+        if how == "OK":
+            return what
+        if how == "QUEUED":
+            return None
+        if how == "EXCEPTION":
+            self.debug("decoderesponse: EXCEPTION")
+            return None
+        if how == "EOF":
+            self.debug("decoderesponse: EOF")
+            self.decode_interrupthook()
+            return None
+        if how == "ERROR":
+            self.debug("decoderesponse: Internal ERROR:", what)
+            raise RuntimeError(what)
+        if how == "CALLEXC":
+            self.debug("decoderesponse: Call Exception:", what)
+            raise what
+        raise SystemError(how, what)
+
+    def decode_interrupthook(self):
+        ""
+        raise EOFError
+
+    def mainloop(self):
+        """Listen on socket until I/O not ready or EOF
+
+        pollresponse() will loop looking for seq number None, which
+        never comes, and exit on EOFError.
+
+        """
+        try:
+            self.getresponse(myseq=None, wait=0.05)
+        except EOFError:
+            self.debug("mainloop:return")
+            return
+
+    def getresponse(self, myseq, wait):
+        response = self._getresponse(myseq, wait)
+        if response is not None:
+            how, what = response
+            if how == "OK":
+                response = how, self._proxify(what)
+        return response
+
+    def _proxify(self, obj):
+        if isinstance(obj, RemoteProxy):
+            return RPCProxy(self, obj.oid)
+        if isinstance(obj, list):
+            return list(map(self._proxify, obj))
+        # XXX Check for other types -- not currently needed
+        return obj
+
+    def _getresponse(self, myseq, wait):
+        self.debug("_getresponse:myseq:", myseq)
+        if threading.current_thread() is self.sockthread:
+            # this thread does all reading of requests or responses
+            while True:
+                response = self.pollresponse(myseq, wait)
+                if response is not None:
+                    return response
+        else:
+            # wait for notification from socket handling thread
+            cvar = self.cvars[myseq]
+            cvar.acquire()
+            while myseq not in self.responses:
+                cvar.wait()
+            response = self.responses[myseq]
+            self.debug("_getresponse:%s: thread woke up: response: %s" %
+                       (myseq, response))
+            del self.responses[myseq]
+            del self.cvars[myseq]
+            cvar.release()
+            return response
+
+    def newseq(self):
+        self.nextseq = seq = self.nextseq + 2
+        return seq
+
+    def putmessage(self, message):
+        self.debug("putmessage:%d:" % message[0])
+        try:
+            s = dumps(message)
+        except pickle.PicklingError:
+            print("Cannot pickle:", repr(message), file=sys.__stderr__)
+            raise
+        s = struct.pack("<i", len(s)) + s
+        while len(s) > 0:
+            try:
+                r, w, x = select.select([], [self.sock], [])
+                n = self.sock.send(s[:BUFSIZE])
+            except (AttributeError, TypeError):
+                raise OSError("socket no longer exists")
+            s = s[n:]
+
+    buff = b''
+    bufneed = 4
+    bufstate = 0 # meaning: 0 => reading count; 1 => reading data
+
+    def pollpacket(self, wait):
+        self._stage0()
+        if len(self.buff) < self.bufneed:
+            r, w, x = select.select([self.sock.fileno()], [], [], wait)
+            if len(r) == 0:
+                return None
+            try:
+                s = self.sock.recv(BUFSIZE)
+            except OSError:
+                raise EOFError
+            if len(s) == 0:
+                raise EOFError
+            self.buff += s
+            self._stage0()
+        return self._stage1()
+
+    def _stage0(self):
+        if self.bufstate == 0 and len(self.buff) >= 4:
+            s = self.buff[:4]
+            self.buff = self.buff[4:]
+            self.bufneed = struct.unpack("<i", s)[0]
+            self.bufstate = 1
+
+    def _stage1(self):
+        if self.bufstate == 1 and len(self.buff) >= self.bufneed:
+            packet = self.buff[:self.bufneed]
+            self.buff = self.buff[self.bufneed:]
+            self.bufneed = 4
+            self.bufstate = 0
+            return packet
+
+    def pollmessage(self, wait):
+        packet = self.pollpacket(wait)
+        if packet is None:
+            return None
+        try:
+            message = pickle.loads(packet)
+        except pickle.UnpicklingError:
+            print("-----------------------", file=sys.__stderr__)
+            print("cannot unpickle packet:", repr(packet), file=sys.__stderr__)
+            traceback.print_stack(file=sys.__stderr__)
+            print("-----------------------", file=sys.__stderr__)
+            raise
+        return message
+
+    def pollresponse(self, myseq, wait):
+        """Handle messages received on the socket.
+
+        Some messages received may be asynchronous 'call' or 'queue' requests,
+        and some may be responses for other threads.
+
+        'call' requests are passed to self.localcall() with the expectation of
+        immediate execution, during which time the socket is not serviced.
+
+        'queue' requests are used for tasks (which may block or hang) to be
+        processed in a different thread.  These requests are fed into
+        request_queue by self.localcall().  Responses to queued requests are
+        taken from response_queue and sent across the link with the associated
+        sequence numbers.  Messages in the queues are (sequence_number,
+        request/response) tuples and code using this module removing messages
+        from the request_queue is responsible for returning the correct
+        sequence number in the response_queue.
+
+        pollresponse() will loop until a response message with the myseq
+        sequence number is received, and will save other responses in
+        self.responses and notify the owning thread.
+
+        """
+        while True:
+            # send queued response if there is one available
+            try:
+                qmsg = response_queue.get(0)
+            except queue.Empty:
+                pass
+            else:
+                seq, response = qmsg
+                message = (seq, ('OK', response))
+                self.putmessage(message)
+            # poll for message on link
+            try:
+                message = self.pollmessage(wait)
+                if message is None:  # socket not ready
+                    return None
+            except EOFError:
+                self.handle_EOF()
+                return None
+            except AttributeError:
+                return None
+            seq, resq = message
+            how = resq[0]
+            self.debug("pollresponse:%d:myseq:%s" % (seq, myseq))
+            # process or queue a request
+            if how in ("CALL", "QUEUE"):
+                self.debug("pollresponse:%d:localcall:call:" % seq)
+                response = self.localcall(seq, resq)
+                self.debug("pollresponse:%d:localcall:response:%s"
+                           % (seq, response))
+                if how == "CALL":
+                    self.putmessage((seq, response))
+                elif how == "QUEUE":
+                    # don't acknowledge the 'queue' request!
+                    pass
+                continue
+            # return if completed message transaction
+            elif seq == myseq:
+                return resq
+            # must be a response for a different thread:
+            else:
+                cv = self.cvars.get(seq, None)
+                # response involving unknown sequence number is discarded,
+                # probably intended for prior incarnation of server
+                if cv is not None:
+                    cv.acquire()
+                    self.responses[seq] = resq
+                    cv.notify()
+                    cv.release()
+                continue
+
+    def handle_EOF(self):
+        "action taken upon link being closed by peer"
+        self.EOFhook()
+        self.debug("handle_EOF")
+        for key in self.cvars:
+            cv = self.cvars[key]
+            cv.acquire()
+            self.responses[key] = ('EOF', None)
+            cv.notify()
+            cv.release()
+        # call our (possibly overridden) exit function
+        self.exithook()
+
+    def EOFhook(self):
+        "Classes using rpc client/server can override to augment EOF action"
+        pass
+
+#----------------- end class SocketIO --------------------
+
+class RemoteObject:
+    # Token mix-in class
+    pass
+
+
+def remoteref(obj):
+    oid = id(obj)
+    objecttable[oid] = obj
+    return RemoteProxy(oid)
+
+
+class RemoteProxy:
+
+    def __init__(self, oid):
+        self.oid = oid
+
+
+class RPCHandler(socketserver.BaseRequestHandler, SocketIO):
+
+    debugging = False
+    location = "#S"  # Server
+
+    def __init__(self, sock, addr, svr):
+        svr.current_handler = self ## cgt xxx
+        SocketIO.__init__(self, sock)
+        socketserver.BaseRequestHandler.__init__(self, sock, addr, svr)
+
+    def handle(self):
+        "handle() method required by socketserver"
+        self.mainloop()
+
+    def get_remote_proxy(self, oid):
+        return RPCProxy(self, oid)
+
+
+class RPCClient(SocketIO):
+
+    debugging = False
+    location = "#C"  # Client
+
+    nextseq = 1 # Requests coming from the client are odd numbered
+
+    def __init__(self, address, family=socket.AF_INET, type=socket.SOCK_STREAM):
+        self.listening_sock = socket.socket(family, type)
+        self.listening_sock.bind(address)
+        self.listening_sock.listen(1)
+
+    def accept(self):
+        working_sock, address = self.listening_sock.accept()
+        if self.debugging:
+            print("****** Connection request from ", address, file=sys.__stderr__)
+        if address[0] == LOCALHOST:
+            SocketIO.__init__(self, working_sock)
+        else:
+            print("** Invalid host: ", address, file=sys.__stderr__)
+            raise OSError
+
+    def get_remote_proxy(self, oid):
+        return RPCProxy(self, oid)
+
+
+class RPCProxy:
+
+    __methods = None
+    __attributes = None
+
+    def __init__(self, sockio, oid):
+        self.sockio = sockio
+        self.oid = oid
+
+    def __getattr__(self, name):
+        if self.__methods is None:
+            self.__getmethods()
+        if self.__methods.get(name):
+            return MethodProxy(self.sockio, self.oid, name)
+        if self.__attributes is None:
+            self.__getattributes()
+        if name in self.__attributes:
+            value = self.sockio.remotecall(self.oid, '__getattribute__',
+                                           (name,), {})
+            return value
+        else:
+            raise AttributeError(name)
+
+    def __getattributes(self):
+        self.__attributes = self.sockio.remotecall(self.oid,
+                                                "__attributes__", (), {})
+
+    def __getmethods(self):
+        self.__methods = self.sockio.remotecall(self.oid,
+                                                "__methods__", (), {})
+
+def _getmethods(obj, methods):
+    # Helper to get a list of methods from an object
+    # Adds names to dictionary argument 'methods'
+    for name in dir(obj):
+        attr = getattr(obj, name)
+        if callable(attr):
+            methods[name] = 1
+    if isinstance(obj, type):
+        for super in obj.__bases__:
+            _getmethods(super, methods)
+
+def _getattributes(obj, attributes):
+    for name in dir(obj):
+        attr = getattr(obj, name)
+        if not callable(attr):
+            attributes[name] = 1
+
+
+class MethodProxy:
+
+    def __init__(self, sockio, oid, name):
+        self.sockio = sockio
+        self.oid = oid
+        self.name = name
+
+    def __call__(self, /, *args, **kwargs):
+        value = self.sockio.remotecall(self.oid, self.name, args, kwargs)
+        return value
+
+
+# XXX KBK 09Sep03  We need a proper unit test for this module.  Previously
+#                  existing test code was removed at Rev 1.27 (r34098).
+
+def displayhook(value):
+    """Override standard display hook to use non-locale encoding"""
+    if value is None:
+        return
+    # Set '_' to None to avoid recursion
+    builtins._ = None
+    text = repr(value)
+    try:
+        sys.stdout.write(text)
+    except UnicodeEncodeError:
+        # let's use ascii while utf8-bmp codec doesn't present
+        encoding = 'ascii'
+        bytes = text.encode(encoding, 'backslashreplace')
+        text = bytes.decode(encoding, 'strict')
+        sys.stdout.write(text)
+    sys.stdout.write("\n")
+    builtins._ = value
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_rpc', verbosity=2,)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/run.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/run.py
new file mode 100644
index 0000000000000000000000000000000000000000..a30db99a619a93b9cf228cab67531027187cc767
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/run.py
@@ -0,0 +1,653 @@
+""" idlelib.run
+
+Simplified, pyshell.ModifiedInterpreter spawns a subprocess with
+f'''{sys.executable} -c "__import__('idlelib.run').run.main()"'''
+'.run' is needed because __import__ returns idlelib, not idlelib.run.
+"""
+import contextlib
+import functools
+import io
+import linecache
+import queue
+import sys
+import textwrap
+import time
+import traceback
+import _thread as thread
+import threading
+import warnings
+
+import idlelib  # testing
+from idlelib import autocomplete  # AutoComplete, fetch_encodings
+from idlelib import calltip  # Calltip
+from idlelib import debugger_r  # start_debugger
+from idlelib import debugobj_r  # remote_object_tree_item
+from idlelib import iomenu  # encoding
+from idlelib import rpc  # multiple objects
+from idlelib import stackviewer  # StackTreeItem
+import __main__
+
+import tkinter  # Use tcl and, if startup fails, messagebox.
+if not hasattr(sys.modules['idlelib.run'], 'firstrun'):
+    # Undo modifications of tkinter by idlelib imports; see bpo-25507.
+    for mod in ('simpledialog', 'messagebox', 'font',
+                'dialog', 'filedialog', 'commondialog',
+                'ttk'):
+        delattr(tkinter, mod)
+        del sys.modules['tkinter.' + mod]
+    # Avoid AttributeError if run again; see bpo-37038.
+    sys.modules['idlelib.run'].firstrun = False
+
+LOCALHOST = '127.0.0.1'
+
+try:
+    eof = 'Ctrl-D (end-of-file)'
+    exit.eof = eof
+    quit.eof = eof
+except NameError: # In case subprocess started with -S (maybe in future).
+    pass
+
+
+def idle_formatwarning(message, category, filename, lineno, line=None):
+    """Format warnings the IDLE way."""
+
+    s = "\nWarning (from warnings module):\n"
+    s += f'  File \"{filename}\", line {lineno}\n'
+    if line is None:
+        line = linecache.getline(filename, lineno)
+    line = line.strip()
+    if line:
+        s += "    %s\n" % line
+    s += f"{category.__name__}: {message}\n"
+    return s
+
+def idle_showwarning_subproc(
+        message, category, filename, lineno, file=None, line=None):
+    """Show Idle-format warning after replacing warnings.showwarning.
+
+    The only difference is the formatter called.
+    """
+    if file is None:
+        file = sys.stderr
+    try:
+        file.write(idle_formatwarning(
+                message, category, filename, lineno, line))
+    except OSError:
+        pass # the file (probably stderr) is invalid - this warning gets lost.
+
+_warnings_showwarning = None
+
+def capture_warnings(capture):
+    "Replace warning.showwarning with idle_showwarning_subproc, or reverse."
+
+    global _warnings_showwarning
+    if capture:
+        if _warnings_showwarning is None:
+            _warnings_showwarning = warnings.showwarning
+            warnings.showwarning = idle_showwarning_subproc
+    else:
+        if _warnings_showwarning is not None:
+            warnings.showwarning = _warnings_showwarning
+            _warnings_showwarning = None
+
+capture_warnings(True)
+
+if idlelib.testing:
+    # gh-121008: When testing IDLE, don't create a Tk object to avoid side
+    # effects such as installing a PyOS_InputHook hook.
+    def handle_tk_events():
+        pass
+else:
+    tcl = tkinter.Tcl()
+
+    def handle_tk_events(tcl=tcl):
+        """Process any tk events that are ready to be dispatched if tkinter
+        has been imported, a tcl interpreter has been created and tk has been
+        loaded."""
+        tcl.eval("update")
+
+# Thread shared globals: Establish a queue between a subthread (which handles
+# the socket) and the main thread (which runs user code), plus global
+# completion, exit and interruptible (the main thread) flags:
+
+exit_now = False
+quitting = False
+interruptible = False
+
+def main(del_exitfunc=False):
+    """Start the Python execution server in a subprocess
+
+    In the Python subprocess, RPCServer is instantiated with handlerclass
+    MyHandler, which inherits register/unregister methods from RPCHandler via
+    the mix-in class SocketIO.
+
+    When the RPCServer 'server' is instantiated, the TCPServer initialization
+    creates an instance of run.MyHandler and calls its handle() method.
+    handle() instantiates a run.Executive object, passing it a reference to the
+    MyHandler object.  That reference is saved as attribute rpchandler of the
+    Executive instance.  The Executive methods have access to the reference and
+    can pass it on to entities that they command
+    (e.g. debugger_r.Debugger.start_debugger()).  The latter, in turn, can
+    call MyHandler(SocketIO) register/unregister methods via the reference to
+    register and unregister themselves.
+
+    """
+    global exit_now
+    global quitting
+    global no_exitfunc
+    no_exitfunc = del_exitfunc
+    #time.sleep(15) # test subprocess not responding
+    try:
+        assert(len(sys.argv) > 1)
+        port = int(sys.argv[-1])
+    except:
+        print("IDLE Subprocess: no IP port passed in sys.argv.",
+              file=sys.__stderr__)
+        return
+
+    capture_warnings(True)
+    sys.argv[:] = [""]
+    threading.Thread(target=manage_socket,
+                     name='SockThread',
+                     args=((LOCALHOST, port),),
+                     daemon=True,
+                    ).start()
+
+    while True:
+        try:
+            if exit_now:
+                try:
+                    exit()
+                except KeyboardInterrupt:
+                    # exiting but got an extra KBI? Try again!
+                    continue
+            try:
+                request = rpc.request_queue.get(block=True, timeout=0.05)
+            except queue.Empty:
+                request = None
+                # Issue 32207: calling handle_tk_events here adds spurious
+                # queue.Empty traceback to event handling exceptions.
+            if request:
+                seq, (method, args, kwargs) = request
+                ret = method(*args, **kwargs)
+                rpc.response_queue.put((seq, ret))
+            else:
+                handle_tk_events()
+        except KeyboardInterrupt:
+            if quitting:
+                exit_now = True
+            continue
+        except SystemExit:
+            capture_warnings(False)
+            raise
+        except:
+            type, value, tb = sys.exc_info()
+            try:
+                print_exception()
+                rpc.response_queue.put((seq, None))
+            except:
+                # Link didn't work, print same exception to __stderr__
+                traceback.print_exception(type, value, tb, file=sys.__stderr__)
+                exit()
+            else:
+                continue
+
+def manage_socket(address):
+    for i in range(3):
+        time.sleep(i)
+        try:
+            server = MyRPCServer(address, MyHandler)
+            break
+        except OSError as err:
+            print("IDLE Subprocess: OSError: " + err.args[1] +
+                  ", retrying....", file=sys.__stderr__)
+            socket_error = err
+    else:
+        print("IDLE Subprocess: Connection to "
+              "IDLE GUI failed, exiting.", file=sys.__stderr__)
+        show_socket_error(socket_error, address)
+        global exit_now
+        exit_now = True
+        return
+    server.handle_request() # A single request only
+
+def show_socket_error(err, address):
+    "Display socket error from manage_socket."
+    import tkinter
+    from tkinter.messagebox import showerror
+    root = tkinter.Tk()
+    fix_scaling(root)
+    root.withdraw()
+    showerror(
+            "Subprocess Connection Error",
+            f"IDLE's subprocess can't connect to {address[0]}:{address[1]}.\n"
+            f"Fatal OSError #{err.errno}: {err.strerror}.\n"
+            "See the 'Startup failure' section of the IDLE doc, online at\n"
+            "https://docs.python.org/3/library/idle.html#startup-failure",
+            parent=root)
+    root.destroy()
+
+
+def get_message_lines(typ, exc, tb):
+    "Return line composing the exception message."
+    if typ in (AttributeError, NameError):
+        # 3.10+ hints are not directly accessible from python (#44026).
+        err = io.StringIO()
+        with contextlib.redirect_stderr(err):
+            sys.__excepthook__(typ, exc, tb)
+        return [err.getvalue().split("\n")[-2] + "\n"]
+    else:
+        return traceback.format_exception_only(typ, exc)
+
+
+def print_exception():
+    import linecache
+    linecache.checkcache()
+    flush_stdout()
+    efile = sys.stderr
+    typ, val, tb = excinfo = sys.exc_info()
+    sys.last_type, sys.last_value, sys.last_traceback = excinfo
+    sys.last_exc = val
+    seen = set()
+
+    def print_exc(typ, exc, tb):
+        seen.add(id(exc))
+        context = exc.__context__
+        cause = exc.__cause__
+        if cause is not None and id(cause) not in seen:
+            print_exc(type(cause), cause, cause.__traceback__)
+            print("\nThe above exception was the direct cause "
+                  "of the following exception:\n", file=efile)
+        elif (context is not None and
+              not exc.__suppress_context__ and
+              id(context) not in seen):
+            print_exc(type(context), context, context.__traceback__)
+            print("\nDuring handling of the above exception, "
+                  "another exception occurred:\n", file=efile)
+        if tb:
+            tbe = traceback.extract_tb(tb)
+            print('Traceback (most recent call last):', file=efile)
+            exclude = ("run.py", "rpc.py", "threading.py", "queue.py",
+                       "debugger_r.py", "bdb.py")
+            cleanup_traceback(tbe, exclude)
+            traceback.print_list(tbe, file=efile)
+        lines = get_message_lines(typ, exc, tb)
+        for line in lines:
+            print(line, end='', file=efile)
+
+    print_exc(typ, val, tb)
+
+def cleanup_traceback(tb, exclude):
+    "Remove excluded traces from beginning/end of tb; get cached lines"
+    orig_tb = tb[:]
+    while tb:
+        for rpcfile in exclude:
+            if tb[0][0].count(rpcfile):
+                break    # found an exclude, break for: and delete tb[0]
+        else:
+            break        # no excludes, have left RPC code, break while:
+        del tb[0]
+    while tb:
+        for rpcfile in exclude:
+            if tb[-1][0].count(rpcfile):
+                break
+        else:
+            break
+        del tb[-1]
+    if len(tb) == 0:
+        # exception was in IDLE internals, don't prune!
+        tb[:] = orig_tb[:]
+        print("** IDLE Internal Exception: ", file=sys.stderr)
+    rpchandler = rpc.objecttable['exec'].rpchandler
+    for i in range(len(tb)):
+        fn, ln, nm, line = tb[i]
+        if nm == '?':
+            nm = "-toplevel-"
+        if not line and fn.startswith("<pyshell#"):
+            line = rpchandler.remotecall('linecache', 'getline',
+                                              (fn, ln), {})
+        tb[i] = fn, ln, nm, line
+
+def flush_stdout():
+    """XXX How to do this now?"""
+
+def exit():
+    """Exit subprocess, possibly after first clearing exit functions.
+
+    If config-main.cfg/.def 'General' 'delete-exitfunc' is True, then any
+    functions registered with atexit will be removed before exiting.
+    (VPython support)
+
+    """
+    if no_exitfunc:
+        import atexit
+        atexit._clear()
+    capture_warnings(False)
+    sys.exit(0)
+
+
+def fix_scaling(root):
+    """Scale fonts on HiDPI displays."""
+    import tkinter.font
+    scaling = float(root.tk.call('tk', 'scaling'))
+    if scaling > 1.4:
+        for name in tkinter.font.names(root):
+            font = tkinter.font.Font(root=root, name=name, exists=True)
+            size = int(font['size'])
+            if size < 0:
+                font['size'] = round(-0.75*size)
+
+
+def fixdoc(fun, text):
+    tem = (fun.__doc__ + '\n\n') if fun.__doc__ is not None else ''
+    fun.__doc__ = tem + textwrap.fill(textwrap.dedent(text))
+
+RECURSIONLIMIT_DELTA = 30
+
+def install_recursionlimit_wrappers():
+    """Install wrappers to always add 30 to the recursion limit."""
+    # see: bpo-26806
+
+    @functools.wraps(sys.setrecursionlimit)
+    def setrecursionlimit(*args, **kwargs):
+        # mimic the original sys.setrecursionlimit()'s input handling
+        if kwargs:
+            raise TypeError(
+                "setrecursionlimit() takes no keyword arguments")
+        try:
+            limit, = args
+        except ValueError:
+            raise TypeError(f"setrecursionlimit() takes exactly one "
+                            f"argument ({len(args)} given)")
+        if not limit > 0:
+            raise ValueError(
+                "recursion limit must be greater or equal than 1")
+
+        return setrecursionlimit.__wrapped__(limit + RECURSIONLIMIT_DELTA)
+
+    fixdoc(setrecursionlimit, f"""\
+            This IDLE wrapper adds {RECURSIONLIMIT_DELTA} to prevent possible
+            uninterruptible loops.""")
+
+    @functools.wraps(sys.getrecursionlimit)
+    def getrecursionlimit():
+        return getrecursionlimit.__wrapped__() - RECURSIONLIMIT_DELTA
+
+    fixdoc(getrecursionlimit, f"""\
+            This IDLE wrapper subtracts {RECURSIONLIMIT_DELTA} to compensate
+            for the {RECURSIONLIMIT_DELTA} IDLE adds when setting the limit.""")
+
+    # add the delta to the default recursion limit, to compensate
+    sys.setrecursionlimit(sys.getrecursionlimit() + RECURSIONLIMIT_DELTA)
+
+    sys.setrecursionlimit = setrecursionlimit
+    sys.getrecursionlimit = getrecursionlimit
+
+
+def uninstall_recursionlimit_wrappers():
+    """Uninstall the recursion limit wrappers from the sys module.
+
+    IDLE only uses this for tests. Users can import run and call
+    this to remove the wrapping.
+    """
+    if (
+            getattr(sys.setrecursionlimit, '__wrapped__', None) and
+            getattr(sys.getrecursionlimit, '__wrapped__', None)
+    ):
+        sys.setrecursionlimit = sys.setrecursionlimit.__wrapped__
+        sys.getrecursionlimit = sys.getrecursionlimit.__wrapped__
+        sys.setrecursionlimit(sys.getrecursionlimit() - RECURSIONLIMIT_DELTA)
+
+
+class MyRPCServer(rpc.RPCServer):
+
+    def handle_error(self, request, client_address):
+        """Override RPCServer method for IDLE
+
+        Interrupt the MainThread and exit server if link is dropped.
+
+        """
+        global quitting
+        try:
+            raise
+        except SystemExit:
+            raise
+        except EOFError:
+            global exit_now
+            exit_now = True
+            thread.interrupt_main()
+        except:
+            erf = sys.__stderr__
+            print(textwrap.dedent(f"""
+            {'-'*40}
+            Unhandled exception in user code execution server!'
+            Thread: {threading.current_thread().name}
+            IDLE Client Address: {client_address}
+            Request: {request!r}
+            """), file=erf)
+            traceback.print_exc(limit=-20, file=erf)
+            print(textwrap.dedent(f"""
+            *** Unrecoverable, server exiting!
+
+            Users should never see this message; it is likely transient.
+            If this recurs, report this with a copy of the message
+            and an explanation of how to make it repeat.
+            {'-'*40}"""), file=erf)
+            quitting = True
+            thread.interrupt_main()
+
+
+# Pseudofiles for shell-remote communication (also used in pyshell)
+
+class StdioFile(io.TextIOBase):
+
+    def __init__(self, shell, tags, encoding='utf-8', errors='strict'):
+        self.shell = shell
+        # GH-78889: accessing unpickleable attributes freezes Shell.
+        # IDLE only needs methods; allow 'width' for possible use.
+        self.shell._RPCProxy__attributes = {'width': 1}
+        self.tags = tags
+        self._encoding = encoding
+        self._errors = errors
+
+    @property
+    def encoding(self):
+        return self._encoding
+
+    @property
+    def errors(self):
+        return self._errors
+
+    @property
+    def name(self):
+        return '<%s>' % self.tags
+
+    def isatty(self):
+        return True
+
+
+class StdOutputFile(StdioFile):
+
+    def writable(self):
+        return True
+
+    def write(self, s):
+        if self.closed:
+            raise ValueError("write to closed file")
+        s = str.encode(s, self.encoding, self.errors).decode(self.encoding, self.errors)
+        return self.shell.write(s, self.tags)
+
+
+class StdInputFile(StdioFile):
+    _line_buffer = ''
+
+    def readable(self):
+        return True
+
+    def read(self, size=-1):
+        if self.closed:
+            raise ValueError("read from closed file")
+        if size is None:
+            size = -1
+        elif not isinstance(size, int):
+            raise TypeError('must be int, not ' + type(size).__name__)
+        result = self._line_buffer
+        self._line_buffer = ''
+        if size < 0:
+            while line := self.shell.readline():
+                result += line
+        else:
+            while len(result) < size:
+                line = self.shell.readline()
+                if not line: break
+                result += line
+            self._line_buffer = result[size:]
+            result = result[:size]
+        return result
+
+    def readline(self, size=-1):
+        if self.closed:
+            raise ValueError("read from closed file")
+        if size is None:
+            size = -1
+        elif not isinstance(size, int):
+            raise TypeError('must be int, not ' + type(size).__name__)
+        line = self._line_buffer or self.shell.readline()
+        if size < 0:
+            size = len(line)
+        eol = line.find('\n', 0, size)
+        if eol >= 0:
+            size = eol + 1
+        self._line_buffer = line[size:]
+        return line[:size]
+
+    def close(self):
+        self.shell.close()
+
+
+class MyHandler(rpc.RPCHandler):
+
+    def handle(self):
+        """Override base method"""
+        executive = Executive(self)
+        self.register("exec", executive)
+        self.console = self.get_remote_proxy("console")
+        sys.stdin = StdInputFile(self.console, "stdin",
+                                 iomenu.encoding, iomenu.errors)
+        sys.stdout = StdOutputFile(self.console, "stdout",
+                                   iomenu.encoding, iomenu.errors)
+        sys.stderr = StdOutputFile(self.console, "stderr",
+                                   iomenu.encoding, "backslashreplace")
+
+        sys.displayhook = rpc.displayhook
+        # page help() text to shell.
+        import pydoc # import must be done here to capture i/o binding
+        pydoc.pager = pydoc.plainpager
+
+        # Keep a reference to stdin so that it won't try to exit IDLE if
+        # sys.stdin gets changed from within IDLE's shell. See issue17838.
+        self._keep_stdin = sys.stdin
+
+        install_recursionlimit_wrappers()
+
+        self.interp = self.get_remote_proxy("interp")
+        rpc.RPCHandler.getresponse(self, myseq=None, wait=0.05)
+
+    def exithook(self):
+        "override SocketIO method - wait for MainThread to shut us down"
+        time.sleep(10)
+
+    def EOFhook(self):
+        "Override SocketIO method - terminate wait on callback and exit thread"
+        global quitting
+        quitting = True
+        thread.interrupt_main()
+
+    def decode_interrupthook(self):
+        "interrupt awakened thread"
+        global quitting
+        quitting = True
+        thread.interrupt_main()
+
+
+class Executive:
+
+    def __init__(self, rpchandler):
+        self.rpchandler = rpchandler
+        if idlelib.testing is False:
+            self.locals = __main__.__dict__
+            self.calltip = calltip.Calltip()
+            self.autocomplete = autocomplete.AutoComplete()
+        else:
+            self.locals = {}
+
+    def runcode(self, code):
+        global interruptible
+        try:
+            self.user_exc_info = None
+            interruptible = True
+            try:
+                exec(code, self.locals)
+            finally:
+                interruptible = False
+        except SystemExit as e:
+            if e.args:  # SystemExit called with an argument.
+                ob = e.args[0]
+                if not isinstance(ob, (type(None), int)):
+                    print('SystemExit: ' + str(ob), file=sys.stderr)
+            # Return to the interactive prompt.
+        except:
+            self.user_exc_info = sys.exc_info()  # For testing, hook, viewer.
+            if quitting:
+                exit()
+            if sys.excepthook is sys.__excepthook__:
+                print_exception()
+            else:
+                try:
+                    sys.excepthook(*self.user_exc_info)
+                except:
+                    self.user_exc_info = sys.exc_info()  # For testing.
+                    print_exception()
+            jit = self.rpchandler.console.getvar("<<toggle-jit-stack-viewer>>")
+            if jit:
+                self.rpchandler.interp.open_remote_stack_viewer()
+        else:
+            flush_stdout()
+
+    def interrupt_the_server(self):
+        if interruptible:
+            thread.interrupt_main()
+
+    def start_the_debugger(self, gui_adap_oid):
+        return debugger_r.start_debugger(self.rpchandler, gui_adap_oid)
+
+    def stop_the_debugger(self, idb_adap_oid):
+        "Unregister the Idb Adapter.  Link objects and Idb then subject to GC"
+        self.rpchandler.unregister(idb_adap_oid)
+
+    def get_the_calltip(self, name):
+        return self.calltip.fetch_tip(name)
+
+    def get_the_completion_list(self, what, mode):
+        return self.autocomplete.fetch_completions(what, mode)
+
+    def stackviewer(self, flist_oid=None):
+        if self.user_exc_info:
+            _, exc, tb = self.user_exc_info
+        else:
+            return None
+        flist = None
+        if flist_oid is not None:
+            flist = self.rpchandler.get_remote_proxy(flist_oid)
+        while tb and tb.tb_frame.f_globals["__name__"] in ["rpc", "run"]:
+            tb = tb.tb_next
+        exc.__traceback__ = tb
+        item = stackviewer.StackTreeItem(exc, flist)
+        return debugobj_r.remote_object_tree_item(item)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_run', verbosity=2)
+
+capture_warnings(False)  # Make sure turned off; see bpo-18081.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/runscript.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/runscript.py
new file mode 100644
index 0000000000000000000000000000000000000000..55712e904603f867df186ff076e855ceffe248d9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/runscript.py
@@ -0,0 +1,213 @@
+"""Execute code from an editor.
+
+Check module: do a full syntax check of the current module.
+Also run the tabnanny to catch any inconsistent tabs.
+
+Run module: also execute the module's code in the __main__ namespace.
+The window must have been saved previously. The module is added to
+sys.modules, and is also added to the __main__ namespace.
+
+TODO: Specify command line arguments in a dialog box.
+"""
+import os
+import tabnanny
+import time
+import tokenize
+
+from tkinter import messagebox
+
+from idlelib.config import idleConf
+from idlelib import macosx
+from idlelib import pyshell
+from idlelib.query import CustomRun
+from idlelib import outwin
+
+indent_message = """Error: Inconsistent indentation detected!
+
+1) Your indentation is outright incorrect (easy to fix), OR
+
+2) Your indentation mixes tabs and spaces.
+
+To fix case 2, change all tabs to spaces by using Edit->Select All followed \
+by Format->Untabify Region and specify the number of columns used by each tab.
+"""
+
+
+class ScriptBinding:
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+        # Provide instance variables referenced by debugger
+        # XXX This should be done differently
+        self.flist = self.editwin.flist
+        self.root = self.editwin.root
+        # cli_args is list of strings that extends sys.argv
+        self.cli_args = []
+        self.perf = 0.0    # Workaround for macOS 11 Uni2; see bpo-42508.
+
+    def check_module_event(self, event):
+        if isinstance(self.editwin, outwin.OutputWindow):
+            self.editwin.text.bell()
+            return 'break'
+        filename = self.getfilename()
+        if not filename:
+            return 'break'
+        if not self.checksyntax(filename):
+            return 'break'
+        if not self.tabnanny(filename):
+            return 'break'
+        return "break"
+
+    def tabnanny(self, filename):
+        # XXX: tabnanny should work on binary files as well
+        with tokenize.open(filename) as f:
+            try:
+                tabnanny.process_tokens(tokenize.generate_tokens(f.readline))
+            except tokenize.TokenError as msg:
+                msgtxt, (lineno, start) = msg.args
+                self.editwin.gotoline(lineno)
+                self.errorbox("Tabnanny Tokenizing Error",
+                              "Token Error: %s" % msgtxt)
+                return False
+            except tabnanny.NannyNag as nag:
+                # The error messages from tabnanny are too confusing...
+                self.editwin.gotoline(nag.get_lineno())
+                self.errorbox("Tab/space error", indent_message)
+                return False
+        return True
+
+    def checksyntax(self, filename):
+        self.shell = shell = self.flist.open_shell()
+        saved_stream = shell.get_warning_stream()
+        shell.set_warning_stream(shell.stderr)
+        with open(filename, 'rb') as f:
+            source = f.read()
+        if b'\r' in source:
+            source = source.replace(b'\r\n', b'\n')
+            source = source.replace(b'\r', b'\n')
+        if source and source[-1] != ord(b'\n'):
+            source = source + b'\n'
+        editwin = self.editwin
+        text = editwin.text
+        text.tag_remove("ERROR", "1.0", "end")
+        try:
+            # If successful, return the compiled code
+            return compile(source, filename, "exec")
+        except (SyntaxError, OverflowError, ValueError) as value:
+            msg = getattr(value, 'msg', '') or value or "<no detail available>"
+            lineno = getattr(value, 'lineno', '') or 1
+            offset = getattr(value, 'offset', '') or 0
+            if offset == 0:
+                lineno += 1  #mark end of offending line
+            pos = "0.0 + %d lines + %d chars" % (lineno-1, offset-1)
+            editwin.colorize_syntax_error(text, pos)
+            self.errorbox("SyntaxError", "%-20s" % msg)
+            return False
+        finally:
+            shell.set_warning_stream(saved_stream)
+
+    def run_custom_event(self, event):
+        return self.run_module_event(event, customize=True)
+
+    def run_module_event(self, event, *, customize=False):
+        """Run the module after setting up the environment.
+
+        First check the syntax.  Next get customization.  If OK, make
+        sure the shell is active and then transfer the arguments, set
+        the run environment's working directory to the directory of the
+        module being executed and also add that directory to its
+        sys.path if not already included.
+        """
+        if macosx.isCocoaTk() and (time.perf_counter() - self.perf < .05):
+            return 'break'
+        if isinstance(self.editwin, outwin.OutputWindow):
+            self.editwin.text.bell()
+            return 'break'
+        filename = self.getfilename()
+        if not filename:
+            return 'break'
+        code = self.checksyntax(filename)
+        if not code:
+            return 'break'
+        if not self.tabnanny(filename):
+            return 'break'
+        if customize:
+            title = f"Customize {self.editwin.short_title()} Run"
+            run_args = CustomRun(self.shell.text, title,
+                                 cli_args=self.cli_args).result
+            if not run_args:  # User cancelled.
+                return 'break'
+        self.cli_args, restart = run_args if customize else ([], True)
+        interp = self.shell.interp
+        if pyshell.use_subprocess and restart:
+            interp.restart_subprocess(
+                    with_cwd=False, filename=filename)
+        dirname = os.path.dirname(filename)
+        argv = [filename]
+        if self.cli_args:
+            argv += self.cli_args
+        interp.runcommand(f"""if 1:
+            __file__ = {filename!r}
+            import sys as _sys
+            from os.path import basename as _basename
+            argv = {argv!r}
+            if (not _sys.argv or
+                _basename(_sys.argv[0]) != _basename(__file__) or
+                len(argv) > 1):
+                _sys.argv = argv
+            import os as _os
+            _os.chdir({dirname!r})
+            del _sys, argv, _basename, _os
+            \n""")
+        interp.prepend_syspath(filename)
+        # XXX KBK 03Jul04 When run w/o subprocess, runtime warnings still
+        #         go to __stderr__.  With subprocess, they go to the shell.
+        #         Need to change streams in pyshell.ModifiedInterpreter.
+        interp.runcode(code)
+        return 'break'
+
+    def getfilename(self):
+        """Get source filename.  If not saved, offer to save (or create) file
+
+        The debugger requires a source file.  Make sure there is one, and that
+        the current version of the source buffer has been saved.  If the user
+        declines to save or cancels the Save As dialog, return None.
+
+        If the user has configured IDLE for Autosave, the file will be
+        silently saved if it already exists and is dirty.
+
+        """
+        filename = self.editwin.io.filename
+        if not self.editwin.get_saved():
+            autosave = idleConf.GetOption('main', 'General',
+                                          'autosave', type='bool')
+            if autosave and filename:
+                self.editwin.io.save(None)
+            else:
+                confirm = self.ask_save_dialog()
+                self.editwin.text.focus_set()
+                if confirm:
+                    self.editwin.io.save(None)
+                    filename = self.editwin.io.filename
+                else:
+                    filename = None
+        return filename
+
+    def ask_save_dialog(self):
+        msg = "Source Must Be Saved\n" + 5*' ' + "OK to Save?"
+        confirm = messagebox.askokcancel(title="Save Before Run or Check",
+                                           message=msg,
+                                           default=messagebox.OK,
+                                           parent=self.editwin.text)
+        return confirm
+
+    def errorbox(self, title, message):
+        # XXX This should really be a function of EditorWindow...
+        messagebox.showerror(title, message, parent=self.editwin.text)
+        self.editwin.text.focus_set()
+        self.perf = time.perf_counter()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_runscript', verbosity=2,)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/scrolledlist.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/scrolledlist.py
new file mode 100644
index 0000000000000000000000000000000000000000..4fb418db326255665edd408f27fe2c55dbca6f98
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/scrolledlist.py
@@ -0,0 +1,151 @@
+from tkinter import *
+from tkinter.ttk import Frame, Scrollbar
+
+from idlelib import macosx
+
+
+class ScrolledList:
+
+    default = "(None)"
+
+    def __init__(self, master, **options):
+        # Create top frame, with scrollbar and listbox
+        self.master = master
+        self.frame = frame = Frame(master)
+        self.frame.pack(fill="both", expand=1)
+        self.vbar = vbar = Scrollbar(frame, name="vbar")
+        self.vbar.pack(side="right", fill="y")
+        self.listbox = listbox = Listbox(frame, exportselection=0,
+            background="white")
+        if options:
+            listbox.configure(options)
+        listbox.pack(expand=1, fill="both")
+        # Tie listbox and scrollbar together
+        vbar["command"] = listbox.yview
+        listbox["yscrollcommand"] = vbar.set
+        # Bind events to the list box
+        listbox.bind("<ButtonRelease-1>", self.click_event)
+        listbox.bind("<Double-ButtonRelease-1>", self.double_click_event)
+        if macosx.isAquaTk():
+            listbox.bind("<ButtonPress-2>", self.popup_event)
+            listbox.bind("<Control-Button-1>", self.popup_event)
+        else:
+            listbox.bind("<ButtonPress-3>", self.popup_event)
+        listbox.bind("<Key-Up>", self.up_event)
+        listbox.bind("<Key-Down>", self.down_event)
+        # Mark as empty
+        self.clear()
+
+    def close(self):
+        self.frame.destroy()
+
+    def clear(self):
+        self.listbox.delete(0, "end")
+        self.empty = 1
+        self.listbox.insert("end", self.default)
+
+    def append(self, item):
+        if self.empty:
+            self.listbox.delete(0, "end")
+            self.empty = 0
+        self.listbox.insert("end", str(item))
+
+    def get(self, index):
+        return self.listbox.get(index)
+
+    def click_event(self, event):
+        self.listbox.activate("@%d,%d" % (event.x, event.y))
+        index = self.listbox.index("active")
+        self.select(index)
+        self.on_select(index)
+        return "break"
+
+    def double_click_event(self, event):
+        index = self.listbox.index("active")
+        self.select(index)
+        self.on_double(index)
+        return "break"
+
+    menu = None
+
+    def popup_event(self, event):
+        if not self.menu:
+            self.make_menu()
+        menu = self.menu
+        self.listbox.activate("@%d,%d" % (event.x, event.y))
+        index = self.listbox.index("active")
+        self.select(index)
+        menu.tk_popup(event.x_root, event.y_root)
+        return "break"
+
+    def make_menu(self):
+        menu = Menu(self.listbox, tearoff=0)
+        self.menu = menu
+        self.fill_menu()
+
+    def up_event(self, event):
+        index = self.listbox.index("active")
+        if self.listbox.selection_includes(index):
+            index = index - 1
+        else:
+            index = self.listbox.size() - 1
+        if index < 0:
+            self.listbox.bell()
+        else:
+            self.select(index)
+            self.on_select(index)
+        return "break"
+
+    def down_event(self, event):
+        index = self.listbox.index("active")
+        if self.listbox.selection_includes(index):
+            index = index + 1
+        else:
+            index = 0
+        if index >= self.listbox.size():
+            self.listbox.bell()
+        else:
+            self.select(index)
+            self.on_select(index)
+        return "break"
+
+    def select(self, index):
+        self.listbox.focus_set()
+        self.listbox.activate(index)
+        self.listbox.selection_clear(0, "end")
+        self.listbox.selection_set(index)
+        self.listbox.see(index)
+
+    # Methods to override for specific actions
+
+    def fill_menu(self):
+        pass
+
+    def on_select(self, index):
+        pass
+
+    def on_double(self, index):
+        pass
+
+
+def _scrolled_list(parent):  # htest #
+    top = Toplevel(parent)
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x+200, y + 175))
+
+    class MyScrolledList(ScrolledList):
+        def fill_menu(self): self.menu.add_command(label="right click")
+        def on_select(self, index): print("select", self.get(index))
+        def on_double(self, index): print("double", self.get(index))
+
+    scrolled_list = MyScrolledList(top)
+    for i in range(30):
+        scrolled_list.append("Item %02d" % i)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_scrolledlist', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_scrolled_list)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/search.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/search.py
new file mode 100644
index 0000000000000000000000000000000000000000..935a4832257fa4a66b5a83776060ee8f1f9e86a6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/search.py
@@ -0,0 +1,165 @@
+"""Search dialog for Find, Find Again, and Find Selection
+   functionality.
+
+   Inherits from SearchDialogBase for GUI and uses searchengine
+   to prepare search pattern.
+"""
+from tkinter import TclError
+
+from idlelib import searchengine
+from idlelib.searchbase import SearchDialogBase
+
+def _setup(text):
+    """Return the new or existing singleton SearchDialog instance.
+
+    The singleton dialog saves user entries and preferences
+    across instances.
+
+    Args:
+        text: Text widget containing the text to be searched.
+    """
+    root = text._root()
+    engine = searchengine.get(root)
+    if not hasattr(engine, "_searchdialog"):
+        engine._searchdialog = SearchDialog(root, engine)
+    return engine._searchdialog
+
+def find(text):
+    """Open the search dialog.
+
+    Module-level function to access the singleton SearchDialog
+    instance and open the dialog.  If text is selected, it is
+    used as the search phrase; otherwise, the previous entry
+    is used.  No search is done with this command.
+    """
+    pat = text.get("sel.first", "sel.last")
+    return _setup(text).open(text, pat)  # Open is inherited from SDBase.
+
+def find_again(text):
+    """Repeat the search for the last pattern and preferences.
+
+    Module-level function to access the singleton SearchDialog
+    instance to search again using the user entries and preferences
+    from the last dialog.  If there was no prior search, open the
+    search dialog; otherwise, perform the search without showing the
+    dialog.
+    """
+    return _setup(text).find_again(text)
+
+def find_selection(text):
+    """Search for the selected pattern in the text.
+
+    Module-level function to access the singleton SearchDialog
+    instance to search using the selected text.  With a text
+    selection, perform the search without displaying the dialog.
+    Without a selection, use the prior entry as the search phrase
+    and don't display the dialog.  If there has been no prior
+    search, open the search dialog.
+    """
+    return _setup(text).find_selection(text)
+
+
+class SearchDialog(SearchDialogBase):
+    "Dialog for finding a pattern in text."
+
+    def create_widgets(self):
+        "Create the base search dialog and add a button for Find Next."
+        SearchDialogBase.create_widgets(self)
+        # TODO - why is this here and not in a create_command_buttons?
+        self.make_button("Find Next", self.default_command, isdef=True)
+
+    def default_command(self, event=None):
+        "Handle the Find Next button as the default command."
+        if not self.engine.getprog():
+            return
+        self.find_again(self.text)
+
+    def find_again(self, text):
+        """Repeat the last search.
+
+        If no search was previously run, open a new search dialog.  In
+        this case, no search is done.
+
+        If a search was previously run, the search dialog won't be
+        shown and the options from the previous search (including the
+        search pattern) will be used to find the next occurrence
+        of the pattern.  Next is relative based on direction.
+
+        Position the window to display the located occurrence in the
+        text.
+
+        Return True if the search was successful and False otherwise.
+        """
+        if not self.engine.getpat():
+            self.open(text)
+            return False
+        if not self.engine.getprog():
+            return False
+        res = self.engine.search_text(text)
+        if res:
+            line, m = res
+            i, j = m.span()
+            first = "%d.%d" % (line, i)
+            last = "%d.%d" % (line, j)
+            try:
+                selfirst = text.index("sel.first")
+                sellast = text.index("sel.last")
+                if selfirst == first and sellast == last:
+                    self.bell()
+                    return False
+            except TclError:
+                pass
+            text.tag_remove("sel", "1.0", "end")
+            text.tag_add("sel", first, last)
+            text.mark_set("insert", self.engine.isback() and first or last)
+            text.see("insert")
+            return True
+        else:
+            self.bell()
+            return False
+
+    def find_selection(self, text):
+        """Search for selected text with previous dialog preferences.
+
+        Instead of using the same pattern for searching (as Find
+        Again does), this first resets the pattern to the currently
+        selected text.  If the selected text isn't changed, then use
+        the prior search phrase.
+        """
+        pat = text.get("sel.first", "sel.last")
+        if pat:
+            self.engine.setcookedpat(pat)
+        return self.find_again(text)
+
+
+def _search_dialog(parent):  # htest #
+    "Display search test box."
+    from tkinter import Toplevel, Text
+    from tkinter.ttk import Frame, Button
+
+    top = Toplevel(parent)
+    top.title("Test SearchDialog")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+
+    frame = Frame(top)
+    frame.pack()
+    text = Text(frame, inactiveselectbackground='gray')
+    text.pack()
+    text.insert("insert","This is a sample string.\n"*5)
+
+    def show_find():
+        text.tag_add('sel', '1.0', 'end')
+        _setup(text).open(text)
+        text.tag_remove('sel', '1.0', 'end')
+
+    button = Button(frame, text="Search (selection ignored)", command=show_find)
+    button.pack()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_search', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_search_dialog)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchbase.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchbase.py
new file mode 100644
index 0000000000000000000000000000000000000000..c68a6ca339af045dbfb52a939ac62c1401f9bb9e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchbase.py
@@ -0,0 +1,210 @@
+'''Define SearchDialogBase used by Search, Replace, and Grep dialogs.'''
+
+from tkinter import Toplevel
+from tkinter.ttk import Frame, Entry, Label, Button, Checkbutton, Radiobutton
+from tkinter.simpledialog import _setup_dialog
+
+
+class SearchDialogBase:
+    '''Create most of a 3 or 4 row, 3 column search dialog.
+
+    The left and wide middle column contain:
+    1 or 2 labeled text entry lines (make_entry, create_entries);
+    a row of standard Checkbuttons (make_frame, create_option_buttons),
+    each of which corresponds to a search engine Variable;
+    a row of dialog-specific Check/Radiobuttons (create_other_buttons).
+
+    The narrow right column contains command buttons
+    (make_button, create_command_buttons).
+    These are bound to functions that execute the command.
+
+    Except for command buttons, this base class is not limited to items
+    common to all three subclasses.  Rather, it is the Find dialog minus
+    the "Find Next" command, its execution function, and the
+    default_command attribute needed in create_widgets. The other
+    dialogs override attributes and methods, the latter to replace and
+    add widgets.
+    '''
+
+    title = "Search Dialog"  # replace in subclasses
+    icon = "Search"
+    needwrapbutton = 1  # not in Find in Files
+
+    def __init__(self, root, engine):
+        '''Initialize root, engine, and top attributes.
+
+        top (level widget): set in create_widgets() called from open().
+        frame: container for all widgets in dialog.
+        text (Text searched): set in open(), only used in subclasses().
+        ent (ry): created in make_entry() called from create_entry().
+        row (of grid): 0 in create_widgets(), +1 in make_entry/frame().
+        default_command: set in subclasses, used in create_widgets().
+
+        title (of dialog): class attribute, override in subclasses.
+        icon (of dialog): ditto, use unclear if cannot minimize dialog.
+        '''
+        self.root = root
+        self.bell = root.bell
+        self.engine = engine
+        self.top = None
+
+    def open(self, text, searchphrase=None):
+        "Make dialog visible on top of others and ready to use."
+        self.text = text
+        if not self.top:
+            self.create_widgets()
+        else:
+            self.top.deiconify()
+            self.top.tkraise()
+        self.top.transient(text.winfo_toplevel())
+        if searchphrase:
+            self.ent.delete(0,"end")
+            self.ent.insert("end",searchphrase)
+        self.ent.focus_set()
+        self.ent.selection_range(0, "end")
+        self.ent.icursor(0)
+        self.top.grab_set()
+
+    def close(self, event=None):
+        "Put dialog away for later use."
+        if self.top:
+            self.top.grab_release()
+            self.top.transient('')
+            self.top.withdraw()
+
+    def create_widgets(self):
+        '''Create basic 3 row x 3 col search (find) dialog.
+
+        Other dialogs override subsidiary create_x methods as needed.
+        Replace and Find-in-Files add another entry row.
+        '''
+        top = Toplevel(self.root)
+        top.bind("<Return>", self.default_command)
+        top.bind("<Escape>", self.close)
+        top.protocol("WM_DELETE_WINDOW", self.close)
+        top.wm_title(self.title)
+        top.wm_iconname(self.icon)
+        _setup_dialog(top)
+        self.top = top
+        self.frame = Frame(top, padding=5)
+        self.frame.grid(sticky="nwes")
+        top.grid_columnconfigure(0, weight=100)
+        top.grid_rowconfigure(0, weight=100)
+
+        self.row = 0
+        self.frame.grid_columnconfigure(0, pad=2, weight=0)
+        self.frame.grid_columnconfigure(1, pad=2, minsize=100, weight=100)
+
+        self.create_entries()  # row 0 (and maybe 1), cols 0, 1
+        self.create_option_buttons()  # next row, cols 0, 1
+        self.create_other_buttons()  # next row, cols 0, 1
+        self.create_command_buttons()  # col 2, all rows
+
+    def make_entry(self, label_text, var):
+        '''Return (entry, label), .
+
+        entry - gridded labeled Entry for text entry.
+        label - Label widget, returned for testing.
+        '''
+        label = Label(self.frame, text=label_text)
+        label.grid(row=self.row, column=0, sticky="nw")
+        entry = Entry(self.frame, textvariable=var, exportselection=0)
+        entry.grid(row=self.row, column=1, sticky="nwe")
+        self.row = self.row + 1
+        return entry, label
+
+    def create_entries(self):
+        "Create one or more entry lines with make_entry."
+        self.ent = self.make_entry("Find:", self.engine.patvar)[0]
+
+    def make_frame(self,labeltext=None):
+        '''Return (frame, label).
+
+        frame - gridded labeled Frame for option or other buttons.
+        label - Label widget, returned for testing.
+        '''
+        if labeltext:
+            label = Label(self.frame, text=labeltext)
+            label.grid(row=self.row, column=0, sticky="nw")
+        else:
+            label = ''
+        frame = Frame(self.frame)
+        frame.grid(row=self.row, column=1, columnspan=1, sticky="nwe")
+        self.row = self.row + 1
+        return frame, label
+
+    def create_option_buttons(self):
+        '''Return (filled frame, options) for testing.
+
+        Options is a list of searchengine booleanvar, label pairs.
+        A gridded frame from make_frame is filled with a Checkbutton
+        for each pair, bound to the var, with the corresponding label.
+        '''
+        frame = self.make_frame("Options")[0]
+        engine = self.engine
+        options = [(engine.revar, "Regular expression"),
+                   (engine.casevar, "Match case"),
+                   (engine.wordvar, "Whole word")]
+        if self.needwrapbutton:
+            options.append((engine.wrapvar, "Wrap around"))
+        for var, label in options:
+            btn = Checkbutton(frame, variable=var, text=label)
+            btn.pack(side="left", fill="both")
+        return frame, options
+
+    def create_other_buttons(self):
+        '''Return (frame, others) for testing.
+
+        Others is a list of value, label pairs.
+        A gridded frame from make_frame is filled with radio buttons.
+        '''
+        frame = self.make_frame("Direction")[0]
+        var = self.engine.backvar
+        others = [(1, 'Up'), (0, 'Down')]
+        for val, label in others:
+            btn = Radiobutton(frame, variable=var, value=val, text=label)
+            btn.pack(side="left", fill="both")
+        return frame, others
+
+    def make_button(self, label, command, isdef=0):
+        "Return command button gridded in command frame."
+        b = Button(self.buttonframe,
+                   text=label, command=command,
+                   default=isdef and "active" or "normal")
+        cols,rows=self.buttonframe.grid_size()
+        b.grid(pady=1,row=rows,column=0,sticky="ew")
+        self.buttonframe.grid(rowspan=rows+1)
+        return b
+
+    def create_command_buttons(self):
+        "Place buttons in vertical command frame gridded on right."
+        f = self.buttonframe = Frame(self.frame)
+        f.grid(row=0,column=2,padx=2,pady=2,ipadx=2,ipady=2)
+
+        b = self.make_button("Close", self.close)
+        b.lower()
+
+
+class _searchbase(SearchDialogBase):  # htest #
+    "Create auto-opening dialog with no text connection."
+
+    def __init__(self, parent):
+        import re
+        from idlelib import searchengine
+
+        self.root = parent
+        self.engine = searchengine.get(parent)
+        self.create_widgets()
+        print(parent.geometry())
+        width,height, x,y = list(map(int, re.split('[x+]', parent.geometry())))
+        self.top.geometry("+%d+%d" % (x + 40, y + 175))
+
+    def default_command(self, dummy): pass
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_searchbase', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_searchbase)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchengine.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchengine.py
new file mode 100644
index 0000000000000000000000000000000000000000..ceb38cfaef900ba4d2f0d6557c5270c5f8da5415
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/searchengine.py
@@ -0,0 +1,234 @@
+'''Define SearchEngine for search dialogs.'''
+import re
+
+from tkinter import StringVar, BooleanVar, TclError
+from tkinter import messagebox
+
+def get(root):
+    '''Return the singleton SearchEngine instance for the process.
+
+    The single SearchEngine saves settings between dialog instances.
+    If there is not a SearchEngine already, make one.
+    '''
+    if not hasattr(root, "_searchengine"):
+        root._searchengine = SearchEngine(root)
+        # This creates a cycle that persists until root is deleted.
+    return root._searchengine
+
+
+class SearchEngine:
+    """Handles searching a text widget for Find, Replace, and Grep."""
+
+    def __init__(self, root):
+        '''Initialize Variables that save search state.
+
+        The dialogs bind these to the UI elements present in the dialogs.
+        '''
+        self.root = root  # need for report_error()
+        self.patvar = StringVar(root, '')   # search pattern
+        self.revar = BooleanVar(root, False)   # regular expression?
+        self.casevar = BooleanVar(root, False)   # match case?
+        self.wordvar = BooleanVar(root, False)   # match whole word?
+        self.wrapvar = BooleanVar(root, True)   # wrap around buffer?
+        self.backvar = BooleanVar(root, False)   # search backwards?
+
+    # Access methods
+
+    def getpat(self):
+        return self.patvar.get()
+
+    def setpat(self, pat):
+        self.patvar.set(pat)
+
+    def isre(self):
+        return self.revar.get()
+
+    def iscase(self):
+        return self.casevar.get()
+
+    def isword(self):
+        return self.wordvar.get()
+
+    def iswrap(self):
+        return self.wrapvar.get()
+
+    def isback(self):
+        return self.backvar.get()
+
+    # Higher level access methods
+
+    def setcookedpat(self, pat):
+        "Set pattern after escaping if re."
+        # called only in search.py: 66
+        if self.isre():
+            pat = re.escape(pat)
+        self.setpat(pat)
+
+    def getcookedpat(self):
+        pat = self.getpat()
+        if not self.isre():  # if True, see setcookedpat
+            pat = re.escape(pat)
+        if self.isword():
+            pat = r"\b%s\b" % pat
+        return pat
+
+    def getprog(self):
+        "Return compiled cooked search pattern."
+        pat = self.getpat()
+        if not pat:
+            self.report_error(pat, "Empty regular expression")
+            return None
+        pat = self.getcookedpat()
+        flags = 0
+        if not self.iscase():
+            flags = flags | re.IGNORECASE
+        try:
+            prog = re.compile(pat, flags)
+        except re.PatternError as e:
+            self.report_error(pat, e.msg, e.pos)
+            return None
+        return prog
+
+    def report_error(self, pat, msg, col=None):
+        # Derived class could override this with something fancier
+        msg = "Error: " + str(msg)
+        if pat:
+            msg = msg + "\nPattern: " + str(pat)
+        if col is not None:
+            msg = msg + "\nOffset: " + str(col)
+        messagebox.showerror("Regular expression error",
+                               msg, master=self.root)
+
+    def search_text(self, text, prog=None, ok=0):
+        '''Return (lineno, matchobj) or None for forward/backward search.
+
+        This function calls the right function with the right arguments.
+        It directly return the result of that call.
+
+        Text is a text widget. Prog is a precompiled pattern.
+        The ok parameter is a bit complicated as it has two effects.
+
+        If there is a selection, the search begin at either end,
+        depending on the direction setting and ok, with ok meaning that
+        the search starts with the selection. Otherwise, search begins
+        at the insert mark.
+
+        To aid progress, the search functions do not return an empty
+        match at the starting position unless ok is True.
+        '''
+
+        if not prog:
+            prog = self.getprog()
+            if not prog:
+                return None # Compilation failed -- stop
+        wrap = self.wrapvar.get()
+        first, last = get_selection(text)
+        if self.isback():
+            if ok:
+                start = last
+            else:
+                start = first
+            line, col = get_line_col(start)
+            res = self.search_backward(text, prog, line, col, wrap, ok)
+        else:
+            if ok:
+                start = first
+            else:
+                start = last
+            line, col = get_line_col(start)
+            res = self.search_forward(text, prog, line, col, wrap, ok)
+        return res
+
+    def search_forward(self, text, prog, line, col, wrap, ok=0):
+        wrapped = 0
+        startline = line
+        chars = text.get("%d.0" % line, "%d.0" % (line+1))
+        while chars:
+            m = prog.search(chars[:-1], col)
+            if m:
+                if ok or m.end() > col:
+                    return line, m
+            line = line + 1
+            if wrapped and line > startline:
+                break
+            col = 0
+            ok = 1
+            chars = text.get("%d.0" % line, "%d.0" % (line+1))
+            if not chars and wrap:
+                wrapped = 1
+                wrap = 0
+                line = 1
+                chars = text.get("1.0", "2.0")
+        return None
+
+    def search_backward(self, text, prog, line, col, wrap, ok=0):
+        wrapped = 0
+        startline = line
+        chars = text.get("%d.0" % line, "%d.0" % (line+1))
+        while True:
+            m = search_reverse(prog, chars[:-1], col)
+            if m:
+                if ok or m.start() < col:
+                    return line, m
+            line = line - 1
+            if wrapped and line < startline:
+                break
+            ok = 1
+            if line <= 0:
+                if not wrap:
+                    break
+                wrapped = 1
+                wrap = 0
+                pos = text.index("end-1c")
+                line, col = map(int, pos.split("."))
+            chars = text.get("%d.0" % line, "%d.0" % (line+1))
+            col = len(chars) - 1
+        return None
+
+
+def search_reverse(prog, chars, col):
+    '''Search backwards and return an re match object or None.
+
+    This is done by searching forwards until there is no match.
+    Prog: compiled re object with a search method returning a match.
+    Chars: line of text, without \\n.
+    Col: stop index for the search; the limit for match.end().
+    '''
+    m = prog.search(chars)
+    if not m:
+        return None
+    found = None
+    i, j = m.span()  # m.start(), m.end() == match slice indexes
+    while i < col and j <= col:
+        found = m
+        if i == j:
+            j = j+1
+        m = prog.search(chars, j)
+        if not m:
+            break
+        i, j = m.span()
+    return found
+
+def get_selection(text):
+    '''Return tuple of 'line.col' indexes from selection or insert mark.
+    '''
+    try:
+        first = text.index("sel.first")
+        last = text.index("sel.last")
+    except TclError:
+        first = last = None
+    if not first:
+        first = text.index("insert")
+    if not last:
+        last = first
+    return first, last
+
+def get_line_col(index):
+    '''Return (line, col) tuple of ints from 'line.col' string.'''
+    line, col = map(int, index.split(".")) # Fails on invalid index
+    return line, col
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_searchengine', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/sidebar.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/sidebar.py
new file mode 100644
index 0000000000000000000000000000000000000000..aa19a24e3edef28cc864d7fc3dda979d9c3ef76a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/sidebar.py
@@ -0,0 +1,543 @@
+"""Line numbering implementation for IDLE as an extension.
+Includes BaseSideBar which can be extended for other sidebar based extensions
+"""
+import contextlib
+import functools
+import itertools
+
+import tkinter as tk
+from tkinter.font import Font
+from idlelib.config import idleConf
+from idlelib.delegator import Delegator
+from idlelib import macosx
+
+
+def get_lineno(text, index):
+    """Return the line number of an index in a Tk text widget."""
+    text_index = text.index(index)
+    return int(float(text_index)) if text_index else None
+
+
+def get_end_linenumber(text):
+    """Return the number of the last line in a Tk text widget."""
+    return get_lineno(text, 'end-1c')
+
+
+def get_displaylines(text, index):
+    """Display height, in lines, of a logical line in a Tk text widget."""
+    return text.count(f"{index} linestart",
+                      f"{index} lineend",
+                      "displaylines", return_ints=True)
+
+def get_widget_padding(widget):
+    """Get the total padding of a Tk widget, including its border."""
+    # TODO: use also in codecontext.py
+    manager = widget.winfo_manager()
+    if manager == 'pack':
+        info = widget.pack_info()
+    elif manager == 'grid':
+        info = widget.grid_info()
+    else:
+        raise ValueError(f"Unsupported geometry manager: {manager}")
+
+    # All values are passed through getint(), since some
+    # values may be pixel objects, which can't simply be added to ints.
+    padx = sum(map(widget.tk.getint, [
+        info['padx'],
+        widget.cget('padx'),
+        widget.cget('border'),
+    ]))
+    pady = sum(map(widget.tk.getint, [
+        info['pady'],
+        widget.cget('pady'),
+        widget.cget('border'),
+    ]))
+    return padx, pady
+
+
+@contextlib.contextmanager
+def temp_enable_text_widget(text):
+    text.configure(state=tk.NORMAL)
+    try:
+        yield
+    finally:
+        text.configure(state=tk.DISABLED)
+
+
+class BaseSideBar:
+    """A base class for sidebars using Text."""
+    def __init__(self, editwin):
+        self.editwin = editwin
+        self.parent = editwin.text_frame
+        self.text = editwin.text
+
+        self.is_shown = False
+
+        self.main_widget = self.init_widgets()
+
+        self.bind_events()
+
+        self.update_font()
+        self.update_colors()
+
+    def init_widgets(self):
+        """Initialize the sidebar's widgets, returning the main widget."""
+        raise NotImplementedError
+
+    def update_font(self):
+        """Update the sidebar text font, usually after config changes."""
+        raise NotImplementedError
+
+    def update_colors(self):
+        """Update the sidebar text colors, usually after config changes."""
+        raise NotImplementedError
+
+    def grid(self):
+        """Layout the widget, always using grid layout."""
+        raise NotImplementedError
+
+    def show_sidebar(self):
+        if not self.is_shown:
+            self.grid()
+            self.is_shown = True
+
+    def hide_sidebar(self):
+        if self.is_shown:
+            self.main_widget.grid_forget()
+            self.is_shown = False
+
+    def yscroll_event(self, *args, **kwargs):
+        """Hook for vertical scrolling for sub-classes to override."""
+        raise NotImplementedError
+
+    def redirect_yscroll_event(self, *args, **kwargs):
+        """Redirect vertical scrolling to the main editor text widget.
+
+        The scroll bar is also updated.
+        """
+        self.editwin.vbar.set(*args)
+        return self.yscroll_event(*args, **kwargs)
+
+    def redirect_focusin_event(self, event):
+        """Redirect focus-in events to the main editor text widget."""
+        self.text.focus_set()
+        return 'break'
+
+    def redirect_mousebutton_event(self, event, event_name):
+        """Redirect mouse button events to the main editor text widget."""
+        self.text.focus_set()
+        self.text.event_generate(event_name, x=0, y=event.y)
+        return 'break'
+
+    def redirect_mousewheel_event(self, event):
+        """Redirect mouse wheel events to the editwin text widget."""
+        self.text.event_generate('<MouseWheel>',
+                                 x=0, y=event.y, delta=event.delta)
+        return 'break'
+
+    def bind_events(self):
+        self.text['yscrollcommand'] = self.redirect_yscroll_event
+
+        # Ensure focus is always redirected to the main editor text widget.
+        self.main_widget.bind('<FocusIn>', self.redirect_focusin_event)
+
+        # Redirect mouse scrolling to the main editor text widget.
+        #
+        # Note that without this, scrolling with the mouse only scrolls
+        # the line numbers.
+        self.main_widget.bind('<MouseWheel>', self.redirect_mousewheel_event)
+
+        # Redirect mouse button events to the main editor text widget,
+        # except for the left mouse button (1).
+        #
+        # Note: X-11 sends Button-4 and Button-5 events for the scroll wheel.
+        def bind_mouse_event(event_name, target_event_name):
+            handler = functools.partial(self.redirect_mousebutton_event,
+                                        event_name=target_event_name)
+            self.main_widget.bind(event_name, handler)
+
+        for button in [2, 3, 4, 5]:
+            for event_name in (f'<Button-{button}>',
+                               f'<ButtonRelease-{button}>',
+                               f'<B{button}-Motion>',
+                               ):
+                bind_mouse_event(event_name, target_event_name=event_name)
+
+            # Convert double- and triple-click events to normal click events,
+            # since event_generate() doesn't allow generating such events.
+            for event_name in (f'<Double-Button-{button}>',
+                               f'<Triple-Button-{button}>',
+                               ):
+                bind_mouse_event(event_name,
+                                 target_event_name=f'<Button-{button}>')
+
+        # start_line is set upon <Button-1> to allow selecting a range of rows
+        # by dragging.  It is cleared upon <ButtonRelease-1>.
+        start_line = None
+
+        # last_y is initially set upon <B1-Leave> and is continuously updated
+        # upon <B1-Motion>, until <B1-Enter> or the mouse button is released.
+        # It is used in text_auto_scroll(), which is called repeatedly and
+        # does have a mouse event available.
+        last_y = None
+
+        # auto_scrolling_after_id is set whenever text_auto_scroll is
+        # scheduled via .after().  It is used to stop the auto-scrolling
+        # upon <B1-Enter>, as well as to avoid scheduling the function several
+        # times in parallel.
+        auto_scrolling_after_id = None
+
+        def drag_update_selection_and_insert_mark(y_coord):
+            """Helper function for drag and selection event handlers."""
+            lineno = get_lineno(self.text, f"@0,{y_coord}")
+            a, b = sorted([start_line, lineno])
+            self.text.tag_remove("sel", "1.0", "end")
+            self.text.tag_add("sel", f"{a}.0", f"{b+1}.0")
+            self.text.mark_set("insert",
+                               f"{lineno if lineno == a else lineno + 1}.0")
+
+        def b1_mousedown_handler(event):
+            nonlocal start_line
+            nonlocal last_y
+            start_line = int(float(self.text.index(f"@0,{event.y}")))
+            last_y = event.y
+
+            drag_update_selection_and_insert_mark(event.y)
+        self.main_widget.bind('<Button-1>', b1_mousedown_handler)
+
+        def b1_mouseup_handler(event):
+            # On mouse up, we're no longer dragging.  Set the shared persistent
+            # variables to None to represent this.
+            nonlocal start_line
+            nonlocal last_y
+            start_line = None
+            last_y = None
+            self.text.event_generate('<ButtonRelease-1>', x=0, y=event.y)
+        self.main_widget.bind('<ButtonRelease-1>', b1_mouseup_handler)
+
+        def b1_drag_handler(event):
+            nonlocal last_y
+            if last_y is None:  # i.e. if not currently dragging
+                return
+            last_y = event.y
+            drag_update_selection_and_insert_mark(event.y)
+        self.main_widget.bind('<B1-Motion>', b1_drag_handler)
+
+        def text_auto_scroll():
+            """Mimic Text auto-scrolling when dragging outside of it."""
+            # See: https://github.com/tcltk/tk/blob/064ff9941b4b80b85916a8afe86a6c21fd388b54/library/text.tcl#L670
+            nonlocal auto_scrolling_after_id
+            y = last_y
+            if y is None:
+                self.main_widget.after_cancel(auto_scrolling_after_id)
+                auto_scrolling_after_id = None
+                return
+            elif y < 0:
+                self.text.yview_scroll(-1 + y, 'pixels')
+                drag_update_selection_and_insert_mark(y)
+            elif y > self.main_widget.winfo_height():
+                self.text.yview_scroll(1 + y - self.main_widget.winfo_height(),
+                                       'pixels')
+                drag_update_selection_and_insert_mark(y)
+            auto_scrolling_after_id = \
+                self.main_widget.after(50, text_auto_scroll)
+
+        def b1_leave_handler(event):
+            # Schedule the initial call to text_auto_scroll(), if not already
+            # scheduled.
+            nonlocal auto_scrolling_after_id
+            if auto_scrolling_after_id is None:
+                nonlocal last_y
+                last_y = event.y
+                auto_scrolling_after_id = \
+                    self.main_widget.after(0, text_auto_scroll)
+        self.main_widget.bind('<B1-Leave>', b1_leave_handler)
+
+        def b1_enter_handler(event):
+            # Cancel the scheduling of text_auto_scroll(), if it exists.
+            nonlocal auto_scrolling_after_id
+            if auto_scrolling_after_id is not None:
+                self.main_widget.after_cancel(auto_scrolling_after_id)
+                auto_scrolling_after_id = None
+        self.main_widget.bind('<B1-Enter>', b1_enter_handler)
+
+
+class EndLineDelegator(Delegator):
+    """Generate callbacks with the current end line number.
+
+    The provided callback is called after every insert and delete.
+    """
+    def __init__(self, changed_callback):
+        Delegator.__init__(self)
+        self.changed_callback = changed_callback
+
+    def insert(self, index, chars, tags=None):
+        self.delegate.insert(index, chars, tags)
+        self.changed_callback(get_end_linenumber(self.delegate))
+
+    def delete(self, index1, index2=None):
+        self.delegate.delete(index1, index2)
+        self.changed_callback(get_end_linenumber(self.delegate))
+
+
+class LineNumbers(BaseSideBar):
+    """Line numbers support for editor windows."""
+    def __init__(self, editwin):
+        super().__init__(editwin)
+
+        end_line_delegator = EndLineDelegator(self.update_sidebar_text)
+        # Insert the delegator after the undo delegator, so that line numbers
+        # are properly updated after undo and redo actions.
+        self.editwin.per.insertfilterafter(end_line_delegator,
+                                           after=self.editwin.undo)
+
+    def init_widgets(self):
+        _padx, pady = get_widget_padding(self.text)
+        self.sidebar_text = tk.Text(self.parent, width=1, wrap=tk.NONE,
+                                    padx=2, pady=pady,
+                                    borderwidth=0, highlightthickness=0)
+        self.sidebar_text.config(state=tk.DISABLED)
+
+        self.prev_end = 1
+        self._sidebar_width_type = type(self.sidebar_text['width'])
+        with temp_enable_text_widget(self.sidebar_text):
+            self.sidebar_text.insert('insert', '1', 'linenumber')
+        self.sidebar_text.config(takefocus=False, exportselection=False)
+        self.sidebar_text.tag_config('linenumber', justify=tk.RIGHT)
+
+        end = get_end_linenumber(self.text)
+        self.update_sidebar_text(end)
+
+        return self.sidebar_text
+
+    def grid(self):
+        self.sidebar_text.grid(row=1, column=0, sticky=tk.NSEW)
+
+    def update_font(self):
+        font = idleConf.GetFont(self.text, 'main', 'EditorWindow')
+        self.sidebar_text['font'] = font
+
+    def update_colors(self):
+        """Update the sidebar text colors, usually after config changes."""
+        colors = idleConf.GetHighlight(idleConf.CurrentTheme(), 'linenumber')
+        foreground = colors['foreground']
+        background = colors['background']
+        self.sidebar_text.config(
+            fg=foreground, bg=background,
+            selectforeground=foreground, selectbackground=background,
+            inactiveselectbackground=background,
+        )
+
+    def update_sidebar_text(self, end):
+        """
+        Perform the following action:
+        Each line sidebar_text contains the linenumber for that line
+        Synchronize with editwin.text so that both sidebar_text and
+        editwin.text contain the same number of lines"""
+        if end == self.prev_end:
+            return
+
+        width_difference = len(str(end)) - len(str(self.prev_end))
+        if width_difference:
+            cur_width = int(float(self.sidebar_text['width']))
+            new_width = cur_width + width_difference
+            self.sidebar_text['width'] = self._sidebar_width_type(new_width)
+
+        with temp_enable_text_widget(self.sidebar_text):
+            if end > self.prev_end:
+                new_text = '\n'.join(itertools.chain(
+                    [''],
+                    map(str, range(self.prev_end + 1, end + 1)),
+                ))
+                self.sidebar_text.insert(f'end -1c', new_text, 'linenumber')
+            else:
+                self.sidebar_text.delete(f'{end+1}.0 -1c', 'end -1c')
+
+        self.prev_end = end
+
+    def yscroll_event(self, *args, **kwargs):
+        self.sidebar_text.yview_moveto(args[0])
+        return 'break'
+
+
+class WrappedLineHeightChangeDelegator(Delegator):
+    def __init__(self, callback):
+        """
+        callback - Callable, will be called when an insert, delete or replace
+                   action on the text widget may require updating the shell
+                   sidebar.
+        """
+        Delegator.__init__(self)
+        self.callback = callback
+
+    def insert(self, index, chars, tags=None):
+        is_single_line = '\n' not in chars
+        if is_single_line:
+            before_displaylines = get_displaylines(self, index)
+
+        self.delegate.insert(index, chars, tags)
+
+        if is_single_line:
+            after_displaylines = get_displaylines(self, index)
+            if after_displaylines == before_displaylines:
+                return  # no need to update the sidebar
+
+        self.callback()
+
+    def delete(self, index1, index2=None):
+        if index2 is None:
+            index2 = index1 + "+1c"
+        is_single_line = get_lineno(self, index1) == get_lineno(self, index2)
+        if is_single_line:
+            before_displaylines = get_displaylines(self, index1)
+
+        self.delegate.delete(index1, index2)
+
+        if is_single_line:
+            after_displaylines = get_displaylines(self, index1)
+            if after_displaylines == before_displaylines:
+                return  # no need to update the sidebar
+
+        self.callback()
+
+
+class ShellSidebar(BaseSideBar):
+    """Sidebar for the PyShell window, for prompts etc."""
+    def __init__(self, editwin):
+        self.canvas = None
+        self.line_prompts = {}
+
+        super().__init__(editwin)
+
+        change_delegator = \
+            WrappedLineHeightChangeDelegator(self.change_callback)
+        # Insert the TextChangeDelegator after the last delegator, so that
+        # the sidebar reflects final changes to the text widget contents.
+        d = self.editwin.per.top
+        if d.delegate is not self.text:
+            while d.delegate is not self.editwin.per.bottom:
+                d = d.delegate
+        self.editwin.per.insertfilterafter(change_delegator, after=d)
+
+        self.is_shown = True
+
+    def init_widgets(self):
+        self.canvas = tk.Canvas(self.parent, width=30,
+                                borderwidth=0, highlightthickness=0,
+                                takefocus=False)
+        self.update_sidebar()
+        self.grid()
+        return self.canvas
+
+    def bind_events(self):
+        super().bind_events()
+
+        self.main_widget.bind(
+            # AquaTk defines <2> as the right button, not <3>.
+            "<Button-2>" if macosx.isAquaTk() else "<Button-3>",
+            self.context_menu_event,
+        )
+
+    def context_menu_event(self, event):
+        rmenu = tk.Menu(self.main_widget, tearoff=0)
+        has_selection = bool(self.text.tag_nextrange('sel', '1.0'))
+        def mkcmd(eventname):
+            return lambda: self.text.event_generate(eventname)
+        rmenu.add_command(label='Copy',
+                          command=mkcmd('<<copy>>'),
+                          state='normal' if has_selection else 'disabled')
+        rmenu.add_command(label='Copy with prompts',
+                          command=mkcmd('<<copy-with-prompts>>'),
+                          state='normal' if has_selection else 'disabled')
+        rmenu.tk_popup(event.x_root, event.y_root)
+        return "break"
+
+    def grid(self):
+        self.canvas.grid(row=1, column=0, sticky=tk.NSEW, padx=2, pady=0)
+
+    def change_callback(self):
+        if self.is_shown:
+            self.update_sidebar()
+
+    def update_sidebar(self):
+        text = self.text
+        text_tagnames = text.tag_names
+        canvas = self.canvas
+        line_prompts = self.line_prompts = {}
+
+        canvas.delete(tk.ALL)
+
+        index = text.index("@0,0")
+        if index.split('.', 1)[1] != '0':
+            index = text.index(f'{index}+1line linestart')
+        while (lineinfo := text.dlineinfo(index)) is not None:
+            y = lineinfo[1]
+            prev_newline_tagnames = text_tagnames(f"{index} linestart -1c")
+            prompt = (
+                '>>>' if "console" in prev_newline_tagnames else
+                '...' if "stdin" in prev_newline_tagnames else
+                None
+            )
+            if prompt:
+                canvas.create_text(2, y, anchor=tk.NW, text=prompt,
+                                   font=self.font, fill=self.colors[0])
+                lineno = get_lineno(text, index)
+                line_prompts[lineno] = prompt
+            index = text.index(f'{index}+1line')
+
+    def yscroll_event(self, *args, **kwargs):
+        """Redirect vertical scrolling to the main editor text widget.
+
+        The scroll bar is also updated.
+        """
+        self.change_callback()
+        return 'break'
+
+    def update_font(self):
+        """Update the sidebar text font, usually after config changes."""
+        font = idleConf.GetFont(self.text, 'main', 'EditorWindow')
+        tk_font = Font(self.text, font=font)
+        char_width = max(tk_font.measure(char) for char in ['>', '.'])
+        self.canvas.configure(width=char_width * 3 + 4)
+        self.font = font
+        self.change_callback()
+
+    def update_colors(self):
+        """Update the sidebar text colors, usually after config changes."""
+        linenumbers_colors = idleConf.GetHighlight(idleConf.CurrentTheme(), 'linenumber')
+        prompt_colors = idleConf.GetHighlight(idleConf.CurrentTheme(), 'console')
+        foreground = prompt_colors['foreground']
+        background = linenumbers_colors['background']
+        self.colors = (foreground, background)
+        self.canvas.configure(background=background)
+        self.change_callback()
+
+
+def _sidebar_number_scrolling(parent):  # htest #
+    from idlelib.idle_test.test_sidebar import Dummy_editwin
+
+    top = tk.Toplevel(parent)
+    text_frame = tk.Frame(top)
+    text_frame.pack(side=tk.LEFT, fill=tk.BOTH, expand=True)
+    text_frame.rowconfigure(1, weight=1)
+    text_frame.columnconfigure(1, weight=1)
+
+    font = idleConf.GetFont(top, 'main', 'EditorWindow')
+    text = tk.Text(text_frame, width=80, height=24, wrap=tk.NONE, font=font)
+    text.grid(row=1, column=1, sticky=tk.NSEW)
+
+    editwin = Dummy_editwin(text)
+    editwin.vbar = tk.Scrollbar(text_frame)
+
+    linenumbers = LineNumbers(editwin)
+    linenumbers.show_sidebar()
+
+    text.insert('1.0', '\n'.join('a'*i for i in range(1, 101)))
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_sidebar', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_sidebar_number_scrolling)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/squeezer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/squeezer.py
new file mode 100644
index 0000000000000000000000000000000000000000..929c3fd3a507f46cd5934080054d44863fe55e1b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/squeezer.py
@@ -0,0 +1,345 @@
+"""An IDLE extension to avoid having very long texts printed in the shell.
+
+A common problem in IDLE's interactive shell is printing of large amounts of
+text into the shell. This makes looking at the previous history difficult.
+Worse, this can cause IDLE to become very slow, even to the point of being
+completely unusable.
+
+This extension will automatically replace long texts with a small button.
+Double-clicking this button will remove it and insert the original text instead.
+Middle-clicking will copy the text to the clipboard. Right-clicking will open
+the text in a separate viewing window.
+
+Additionally, any output can be manually "squeezed" by the user. This includes
+output written to the standard error stream ("stderr"), such as exception
+messages and their tracebacks.
+"""
+import re
+
+import tkinter as tk
+from tkinter import messagebox
+
+from idlelib.config import idleConf
+from idlelib.textview import view_text
+from idlelib.tooltip import Hovertip
+from idlelib import macosx
+
+
+def count_lines_with_wrapping(s, linewidth=80):
+    """Count the number of lines in a given string.
+
+    Lines are counted as if the string was wrapped so that lines are never over
+    linewidth characters long.
+
+    Tabs are considered tabwidth characters long.
+    """
+    tabwidth = 8  # Currently always true in Shell.
+    pos = 0
+    linecount = 1
+    current_column = 0
+
+    for m in re.finditer(r"[\t\n]", s):
+        # Process the normal chars up to tab or newline.
+        numchars = m.start() - pos
+        pos += numchars
+        current_column += numchars
+
+        # Deal with tab or newline.
+        if s[pos] == '\n':
+            # Avoid the `current_column == 0` edge-case, and while we're
+            # at it, don't bother adding 0.
+            if current_column > linewidth:
+                # If the current column was exactly linewidth, divmod
+                # would give (1,0), even though a new line hadn't yet
+                # been started. The same is true if length is any exact
+                # multiple of linewidth. Therefore, subtract 1 before
+                # dividing a non-empty line.
+                linecount += (current_column - 1) // linewidth
+            linecount += 1
+            current_column = 0
+        else:
+            assert s[pos] == '\t'
+            current_column += tabwidth - (current_column % tabwidth)
+
+            # If a tab passes the end of the line, consider the entire
+            # tab as being on the next line.
+            if current_column > linewidth:
+                linecount += 1
+                current_column = tabwidth
+
+        pos += 1 # After the tab or newline.
+
+    # Process remaining chars (no more tabs or newlines).
+    current_column += len(s) - pos
+    # Avoid divmod(-1, linewidth).
+    if current_column > 0:
+        linecount += (current_column - 1) // linewidth
+    else:
+        # Text ended with newline; don't count an extra line after it.
+        linecount -= 1
+
+    return linecount
+
+
+class ExpandingButton(tk.Button):
+    """Class for the "squeezed" text buttons used by Squeezer
+
+    These buttons are displayed inside a Tk Text widget in place of text. A
+    user can then use the button to replace it with the original text, copy
+    the original text to the clipboard or view the original text in a separate
+    window.
+
+    Each button is tied to a Squeezer instance, and it knows to update the
+    Squeezer instance when it is expanded (and therefore removed).
+    """
+    def __init__(self, s, tags, numoflines, squeezer):
+        self.s = s
+        self.tags = tags
+        self.numoflines = numoflines
+        self.squeezer = squeezer
+        self.editwin = editwin = squeezer.editwin
+        self.text = text = editwin.text
+        # The base Text widget is needed to change text before iomark.
+        self.base_text = editwin.per.bottom
+
+        line_plurality = "lines" if numoflines != 1 else "line"
+        button_text = f"Squeezed text ({numoflines} {line_plurality})."
+        tk.Button.__init__(self, text, text=button_text,
+                           background="#FFFFC0", activebackground="#FFFFE0")
+
+        button_tooltip_text = (
+            "Double-click to expand, right-click for more options."
+        )
+        Hovertip(self, button_tooltip_text, hover_delay=80)
+
+        self.bind("<Double-Button-1>", self.expand)
+        if macosx.isAquaTk():
+            # AquaTk defines <2> as the right button, not <3>.
+            self.bind("<Button-2>", self.context_menu_event)
+        else:
+            self.bind("<Button-3>", self.context_menu_event)
+        self.selection_handle(  # X windows only.
+            lambda offset, length: s[int(offset):int(offset) + int(length)])
+
+        self.is_dangerous = None
+        self.after_idle(self.set_is_dangerous)
+
+    def set_is_dangerous(self):
+        dangerous_line_len = 50 * self.text.winfo_width()
+        self.is_dangerous = (
+            self.numoflines > 1000 or
+            len(self.s) > 50000 or
+            any(
+                len(line_match.group(0)) >= dangerous_line_len
+                for line_match in re.finditer(r'[^\n]+', self.s)
+            )
+        )
+
+    def expand(self, event=None):
+        """expand event handler
+
+        This inserts the original text in place of the button in the Text
+        widget, removes the button and updates the Squeezer instance.
+
+        If the original text is dangerously long, i.e. expanding it could
+        cause a performance degradation, ask the user for confirmation.
+        """
+        if self.is_dangerous is None:
+            self.set_is_dangerous()
+        if self.is_dangerous:
+            confirm = messagebox.askokcancel(
+                title="Expand huge output?",
+                message="\n\n".join([
+                    "The squeezed output is very long: %d lines, %d chars.",
+                    "Expanding it could make IDLE slow or unresponsive.",
+                    "It is recommended to view or copy the output instead.",
+                    "Really expand?"
+                ]) % (self.numoflines, len(self.s)),
+                default=messagebox.CANCEL,
+                parent=self.text)
+            if not confirm:
+                return "break"
+
+        index = self.text.index(self)
+        self.base_text.insert(index, self.s, self.tags)
+        self.base_text.delete(self)
+        self.editwin.on_squeezed_expand(index, self.s, self.tags)
+        self.squeezer.expandingbuttons.remove(self)
+
+    def copy(self, event=None):
+        """copy event handler
+
+        Copy the original text to the clipboard.
+        """
+        self.clipboard_clear()
+        self.clipboard_append(self.s)
+
+    def view(self, event=None):
+        """view event handler
+
+        View the original text in a separate text viewer window.
+        """
+        view_text(self.text, "Squeezed Output Viewer", self.s,
+                  modal=False, wrap='none')
+
+    rmenu_specs = (
+        # Item structure: (label, method_name).
+        ('copy', 'copy'),
+        ('view', 'view'),
+    )
+
+    def context_menu_event(self, event):
+        self.text.mark_set("insert", "@%d,%d" % (event.x, event.y))
+        rmenu = tk.Menu(self.text, tearoff=0)
+        for label, method_name in self.rmenu_specs:
+            rmenu.add_command(label=label, command=getattr(self, method_name))
+        rmenu.tk_popup(event.x_root, event.y_root)
+        return "break"
+
+
+class Squeezer:
+    """Replace long outputs in the shell with a simple button.
+
+    This avoids IDLE's shell slowing down considerably, and even becoming
+    completely unresponsive, when very long outputs are written.
+    """
+    @classmethod
+    def reload(cls):
+        """Load class variables from config."""
+        cls.auto_squeeze_min_lines = idleConf.GetOption(
+            "main", "PyShell", "auto-squeeze-min-lines",
+            type="int", default=50,
+        )
+
+    def __init__(self, editwin):
+        """Initialize settings for Squeezer.
+
+        editwin is the shell's Editor window.
+        self.text is the editor window text widget.
+        self.base_test is the actual editor window Tk text widget, rather than
+            EditorWindow's wrapper.
+        self.expandingbuttons is the list of all buttons representing
+            "squeezed" output.
+        """
+        self.editwin = editwin
+        self.text = text = editwin.text
+
+        # Get the base Text widget of the PyShell object, used to change
+        # text before the iomark. PyShell deliberately disables changing
+        # text before the iomark via its 'text' attribute, which is
+        # actually a wrapper for the actual Text widget. Squeezer,
+        # however, needs to make such changes.
+        self.base_text = editwin.per.bottom
+
+        # Twice the text widget's border width and internal padding;
+        # pre-calculated here for the get_line_width() method.
+        self.window_width_delta = 2 * (
+            int(text.cget('border')) +
+            int(text.cget('padx'))
+        )
+
+        self.expandingbuttons = []
+
+        # Replace the PyShell instance's write method with a wrapper,
+        # which inserts an ExpandingButton instead of a long text.
+        def mywrite(s, tags=(), write=editwin.write):
+            # Only auto-squeeze text which has just the "stdout" tag.
+            if tags != "stdout":
+                return write(s, tags)
+
+            # Only auto-squeeze text with at least the minimum
+            # configured number of lines.
+            auto_squeeze_min_lines = self.auto_squeeze_min_lines
+            # First, a very quick check to skip very short texts.
+            if len(s) < auto_squeeze_min_lines:
+                return write(s, tags)
+            # Now the full line-count check.
+            numoflines = self.count_lines(s)
+            if numoflines < auto_squeeze_min_lines:
+                return write(s, tags)
+
+            # Create an ExpandingButton instance.
+            expandingbutton = ExpandingButton(s, tags, numoflines, self)
+
+            # Insert the ExpandingButton into the Text widget.
+            text.mark_gravity("iomark", tk.RIGHT)
+            text.window_create("iomark", window=expandingbutton,
+                               padx=3, pady=5)
+            text.see("iomark")
+            text.update()
+            text.mark_gravity("iomark", tk.LEFT)
+
+            # Add the ExpandingButton to the Squeezer's list.
+            self.expandingbuttons.append(expandingbutton)
+
+        editwin.write = mywrite
+
+    def count_lines(self, s):
+        """Count the number of lines in a given text.
+
+        Before calculation, the tab width and line length of the text are
+        fetched, so that up-to-date values are used.
+
+        Lines are counted as if the string was wrapped so that lines are never
+        over linewidth characters long.
+
+        Tabs are considered tabwidth characters long.
+        """
+        return count_lines_with_wrapping(s, self.editwin.width)
+
+    def squeeze_current_text(self):
+        """Squeeze the text block where the insertion cursor is.
+
+        If the cursor is not in a squeezable block of text, give the
+        user a small warning and do nothing.
+        """
+        # Set tag_name to the first valid tag found on the "insert" cursor.
+        tag_names = self.text.tag_names(tk.INSERT)
+        for tag_name in ("stdout", "stderr"):
+            if tag_name in tag_names:
+                break
+        else:
+            # The insert cursor doesn't have a "stdout" or "stderr" tag.
+            self.text.bell()
+            return "break"
+
+        # Find the range to squeeze.
+        start, end = self.text.tag_prevrange(tag_name, tk.INSERT + "+1c")
+        s = self.text.get(start, end)
+
+        # If the last char is a newline, remove it from the range.
+        if len(s) > 0 and s[-1] == '\n':
+            end = self.text.index("%s-1c" % end)
+            s = s[:-1]
+
+        # Delete the text.
+        self.base_text.delete(start, end)
+
+        # Prepare an ExpandingButton.
+        numoflines = self.count_lines(s)
+        expandingbutton = ExpandingButton(s, tag_name, numoflines, self)
+
+        # insert the ExpandingButton to the Text
+        self.text.window_create(start, window=expandingbutton,
+                                padx=3, pady=5)
+
+        # Insert the ExpandingButton to the list of ExpandingButtons,
+        # while keeping the list ordered according to the position of
+        # the buttons in the Text widget.
+        i = len(self.expandingbuttons)
+        while i > 0 and self.text.compare(self.expandingbuttons[i-1],
+                                          ">", expandingbutton):
+            i -= 1
+        self.expandingbuttons.insert(i, expandingbutton)
+
+        return "break"
+
+
+Squeezer.reload()
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_squeezer', verbosity=2, exit=False)
+
+    # Add htest.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/stackviewer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/stackviewer.py
new file mode 100644
index 0000000000000000000000000000000000000000..95042d4debdc03b77cdeff58a84819db6403b0e9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/stackviewer.py
@@ -0,0 +1,134 @@
+# Rename to stackbrowser or possibly consolidate with browser.
+
+import linecache
+import os
+
+import tkinter as tk
+
+from idlelib.debugobj import ObjectTreeItem, make_objecttreeitem
+from idlelib.tree import TreeNode, TreeItem, ScrolledCanvas
+
+def StackBrowser(root, exc, flist=None, top=None):
+    global sc, item, node  # For testing.
+    if top is None:
+        top = tk.Toplevel(root)
+    sc = ScrolledCanvas(top, bg="white", highlightthickness=0)
+    sc.frame.pack(expand=1, fill="both")
+    item = StackTreeItem(exc, flist)
+    node = TreeNode(sc.canvas, None, item)
+    node.expand()
+
+
+class StackTreeItem(TreeItem):
+
+    def __init__(self, exc, flist=None):
+        self.flist = flist
+        self.stack = self.get_stack(None if exc is None else exc.__traceback__)
+        self.text = f"{type(exc).__name__}: {str(exc)}"
+
+    def get_stack(self, tb):
+        stack = []
+        if tb and tb.tb_frame is None:
+            tb = tb.tb_next
+        while tb is not None:
+            stack.append((tb.tb_frame, tb.tb_lineno))
+            tb = tb.tb_next
+        return stack
+
+    def GetText(self):  # Titlecase names are overrides.
+        return self.text
+
+    def GetSubList(self):
+        sublist = []
+        for info in self.stack:
+            item = FrameTreeItem(info, self.flist)
+            sublist.append(item)
+        return sublist
+
+
+class FrameTreeItem(TreeItem):
+
+    def __init__(self, info, flist):
+        self.info = info
+        self.flist = flist
+
+    def GetText(self):
+        frame, lineno = self.info
+        try:
+            modname = frame.f_globals["__name__"]
+        except:
+            modname = "?"
+        code = frame.f_code
+        filename = code.co_filename
+        funcname = code.co_name
+        sourceline = linecache.getline(filename, lineno)
+        sourceline = sourceline.strip()
+        if funcname in ("?", "", None):
+            item = "%s, line %d: %s" % (modname, lineno, sourceline)
+        else:
+            item = "%s.%s(...), line %d: %s" % (modname, funcname,
+                                             lineno, sourceline)
+        return item
+
+    def GetSubList(self):
+        frame, lineno = self.info
+        sublist = []
+        if frame.f_globals is not frame.f_locals:
+            item = VariablesTreeItem("<locals>", frame.f_locals, self.flist)
+            sublist.append(item)
+        item = VariablesTreeItem("<globals>", frame.f_globals, self.flist)
+        sublist.append(item)
+        return sublist
+
+    def OnDoubleClick(self):
+        if self.flist:
+            frame, lineno = self.info
+            filename = frame.f_code.co_filename
+            if os.path.isfile(filename):
+                self.flist.gotofileline(filename, lineno)
+
+
+class VariablesTreeItem(ObjectTreeItem):
+
+    def GetText(self):
+        return self.labeltext
+
+    def GetLabelText(self):
+        return None
+
+    def IsExpandable(self):
+        return len(self.object) > 0
+
+    def GetSubList(self):
+        sublist = []
+        for key in self.object.keys():  # self.object not necessarily dict.
+            try:
+                value = self.object[key]
+            except KeyError:
+                continue
+            def setfunction(value, key=key, object_=self.object):
+                object_[key] = value
+            item = make_objecttreeitem(key + " =", value, setfunction)
+            sublist.append(item)
+        return sublist
+
+
+def _stackbrowser(parent):  # htest #
+    from idlelib.pyshell import PyShellFileList
+    top = tk.Toplevel(parent)
+    top.title("Test StackViewer")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x + 50, y + 175))
+    flist = PyShellFileList(top)
+    try: # to obtain a traceback object
+        intentional_name_error
+    except NameError as e:
+        StackBrowser(top, e, flist=flist, top=top)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_stackviewer', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_stackbrowser)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/statusbar.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/statusbar.py
new file mode 100644
index 0000000000000000000000000000000000000000..8445d4cc8dfdb9ec2e5352cc315dcddbc3ea8989
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/statusbar.py
@@ -0,0 +1,52 @@
+from tkinter.ttk import Label, Frame
+
+
+class MultiStatusBar(Frame):
+
+    def __init__(self, master, **kw):
+        Frame.__init__(self, master, **kw)
+        self.labels = {}
+
+    def set_label(self, name, text='', side='left', width=0):
+        if name not in self.labels:
+            label = Label(self, borderwidth=0, anchor='w')
+            label.pack(side=side, pady=0, padx=4)
+            self.labels[name] = label
+        else:
+            label = self.labels[name]
+        if width != 0:
+            label.config(width=width)
+        label.config(text=text)
+
+
+def _multistatus_bar(parent):  # htest #
+    from tkinter import Toplevel, Text
+    from tkinter.ttk import Frame, Button
+    top = Toplevel(parent)
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" %(x, y + 175))
+    top.title("Test multistatus bar")
+
+    frame = Frame(top)
+    text = Text(frame, height=5, width=40)
+    text.pack()
+    msb = MultiStatusBar(frame)
+    msb.set_label("one", "hello")
+    msb.set_label("two", "world")
+    msb.pack(side='bottom', fill='x')
+
+    def change():
+        msb.set_label("one", "foo")
+        msb.set_label("two", "bar")
+
+    button = Button(top, text="Update status", command=change)
+    button.pack(side='bottom')
+    frame.pack()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_statusbar', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_multistatus_bar)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/textview.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/textview.py
new file mode 100644
index 0000000000000000000000000000000000000000..23f0f4cb5027ec317c75f1cf1ffeb626c255ec0c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/textview.py
@@ -0,0 +1,193 @@
+"""Simple text browser for IDLE
+
+"""
+from tkinter import Toplevel, Text, TclError,\
+    HORIZONTAL, VERTICAL, NS, EW, NSEW, NONE, WORD, SUNKEN
+from tkinter.ttk import Frame, Scrollbar, Button
+from tkinter.messagebox import showerror
+
+from idlelib.colorizer import color_config
+
+
+class AutoHideScrollbar(Scrollbar):
+    """A scrollbar that is automatically hidden when not needed.
+
+    Only the grid geometry manager is supported.
+    """
+    def set(self, lo, hi):
+        if float(lo) > 0.0 or float(hi) < 1.0:
+            self.grid()
+        else:
+            self.grid_remove()
+        super().set(lo, hi)
+
+    def pack(self, **kwargs):
+        raise TclError(f'{self.__class__.__name__} does not support "pack"')
+
+    def place(self, **kwargs):
+        raise TclError(f'{self.__class__.__name__} does not support "place"')
+
+
+class ScrollableTextFrame(Frame):
+    """Display text with scrollbar(s)."""
+
+    def __init__(self, master, wrap=NONE, **kwargs):
+        """Create a frame for Textview.
+
+        master - master widget for this frame
+        wrap - type of text wrapping to use ('word', 'char' or 'none')
+
+        All parameters except for 'wrap' are passed to Frame.__init__().
+
+        The Text widget is accessible via the 'text' attribute.
+
+        Note: Changing the wrapping mode of the text widget after
+        instantiation is not supported.
+        """
+        super().__init__(master, **kwargs)
+
+        text = self.text = Text(self, wrap=wrap)
+        text.grid(row=0, column=0, sticky=NSEW)
+        self.grid_rowconfigure(0, weight=1)
+        self.grid_columnconfigure(0, weight=1)
+
+        # vertical scrollbar
+        self.yscroll = AutoHideScrollbar(self, orient=VERTICAL,
+                                         takefocus=False,
+                                         command=text.yview)
+        self.yscroll.grid(row=0, column=1, sticky=NS)
+        text['yscrollcommand'] = self.yscroll.set
+
+        # horizontal scrollbar - only when wrap is set to NONE
+        if wrap == NONE:
+            self.xscroll = AutoHideScrollbar(self, orient=HORIZONTAL,
+                                             takefocus=False,
+                                             command=text.xview)
+            self.xscroll.grid(row=1, column=0, sticky=EW)
+            text['xscrollcommand'] = self.xscroll.set
+        else:
+            self.xscroll = None
+
+
+class ViewFrame(Frame):
+    "Display TextFrame and Close button."
+    def __init__(self, parent, contents, wrap='word'):
+        """Create a frame for viewing text with a "Close" button.
+
+        parent - parent widget for this frame
+        contents - text to display
+        wrap - type of text wrapping to use ('word', 'char' or 'none')
+
+        The Text widget is accessible via the 'text' attribute.
+        """
+        super().__init__(parent)
+        self.parent = parent
+        self.bind('<Return>', self.ok)
+        self.bind('<Escape>', self.ok)
+        self.textframe = ScrollableTextFrame(self, relief=SUNKEN, height=700)
+
+        text = self.text = self.textframe.text
+        text.insert('1.0', contents)
+        text.configure(wrap=wrap, highlightthickness=0, state='disabled')
+        color_config(text)
+        text.focus_set()
+
+        self.button_ok = button_ok = Button(
+                self, text='Close', command=self.ok, takefocus=False)
+        self.textframe.pack(side='top', expand=True, fill='both')
+        button_ok.pack(side='bottom')
+
+    def ok(self, event=None):
+        """Dismiss text viewer dialog."""
+        self.parent.destroy()
+
+
+class ViewWindow(Toplevel):
+    "A simple text viewer dialog for IDLE."
+
+    def __init__(self, parent, title, contents, modal=True, wrap=WORD,
+                 *, _htest=False, _utest=False):
+        """Show the given text in a scrollable window with a 'close' button.
+
+        If modal is left True, users cannot interact with other windows
+        until the textview window is closed.
+
+        parent - parent of this dialog
+        title - string which is title of popup dialog
+        contents - text to display in dialog
+        wrap - type of text wrapping to use ('word', 'char' or 'none')
+        _htest - bool; change box location when running htest.
+        _utest - bool; don't wait_window when running unittest.
+        """
+        super().__init__(parent)
+        self['borderwidth'] = 5
+        # Place dialog below parent if running htest.
+        x = parent.winfo_rootx() + 10
+        y = parent.winfo_rooty() + (10 if not _htest else 100)
+        self.geometry(f'=750x500+{x}+{y}')
+
+        self.title(title)
+        self.viewframe = ViewFrame(self, contents, wrap=wrap)
+        self.protocol("WM_DELETE_WINDOW", self.ok)
+        self.button_ok = button_ok = Button(self, text='Close',
+                                            command=self.ok, takefocus=False)
+        self.viewframe.pack(side='top', expand=True, fill='both')
+
+        self.is_modal = modal
+        if self.is_modal:
+            self.transient(parent)
+            self.grab_set()
+            if not _utest:
+                self.wait_window()
+
+    def ok(self, event=None):
+        """Dismiss text viewer dialog."""
+        if self.is_modal:
+            self.grab_release()
+        self.destroy()
+
+
+def view_text(parent, title, contents, modal=True, wrap='word', _utest=False):
+    """Create text viewer for given text.
+
+    parent - parent of this dialog
+    title - string which is the title of popup dialog
+    contents - text to display in this dialog
+    wrap - type of text wrapping to use ('word', 'char' or 'none')
+    modal - controls if users can interact with other windows while this
+            dialog is displayed
+    _utest - bool; controls wait_window on unittest
+    """
+    return ViewWindow(parent, title, contents, modal, wrap=wrap, _utest=_utest)
+
+
+def view_file(parent, title, filename, encoding, modal=True, wrap='word',
+              _utest=False):
+    """Create text viewer for text in filename.
+
+    Return error message if file cannot be read.  Otherwise calls view_text
+    with contents of the file.
+    """
+    try:
+        with open(filename, encoding=encoding) as file:
+            contents = file.read()
+    except OSError:
+        showerror(title='File Load Error',
+                  message=f'Unable to load file {filename!r} .',
+                  parent=parent)
+    except UnicodeDecodeError as err:
+        showerror(title='Unicode Decode Error',
+                  message=str(err),
+                  parent=parent)
+    else:
+        return view_text(parent, title, contents, modal, wrap=wrap,
+                         _utest=_utest)
+    return None
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_textview', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(ViewWindow)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tooltip.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tooltip.py
new file mode 100644
index 0000000000000000000000000000000000000000..df5b1fe1dcfb0802fdfb534fbf505c7703917230
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tooltip.py
@@ -0,0 +1,190 @@
+"""Tools for displaying tool-tips.
+
+This includes:
+ * an abstract base-class for different kinds of tooltips
+ * a simple text-only Tooltip class
+"""
+from tkinter import *
+
+
+class TooltipBase:
+    """abstract base class for tooltips"""
+
+    def __init__(self, anchor_widget):
+        """Create a tooltip.
+
+        anchor_widget: the widget next to which the tooltip will be shown
+
+        Note that a widget will only be shown when showtip() is called.
+        """
+        self.anchor_widget = anchor_widget
+        self.tipwindow = None
+
+    def __del__(self):
+        self.hidetip()
+
+    def showtip(self):
+        """display the tooltip"""
+        if self.tipwindow:
+            return
+        self.tipwindow = tw = Toplevel(self.anchor_widget)
+        # show no border on the top level window
+        tw.wm_overrideredirect(1)
+        try:
+            # This command is only needed and available on Tk >= 8.4.0 for OSX.
+            # Without it, call tips intrude on the typing process by grabbing
+            # the focus.
+            tw.tk.call("::tk::unsupported::MacWindowStyle", "style", tw._w,
+                       "help", "noActivates")
+        except TclError:
+            pass
+
+        self.position_window()
+        self.showcontents()
+        self.tipwindow.update_idletasks()  # Needed on MacOS -- see #34275.
+        self.tipwindow.lift()  # work around bug in Tk 8.5.18+ (issue #24570)
+
+    def position_window(self):
+        """(re)-set the tooltip's screen position"""
+        x, y = self.get_position()
+        root_x = self.anchor_widget.winfo_rootx() + x
+        root_y = self.anchor_widget.winfo_rooty() + y
+        self.tipwindow.wm_geometry("+%d+%d" % (root_x, root_y))
+
+    def get_position(self):
+        """choose a screen position for the tooltip"""
+        # The tip window must be completely outside the anchor widget;
+        # otherwise when the mouse enters the tip window we get
+        # a leave event and it disappears, and then we get an enter
+        # event and it reappears, and so on forever :-(
+        #
+        # Note: This is a simplistic implementation; sub-classes will likely
+        # want to override this.
+        return 20, self.anchor_widget.winfo_height() + 1
+
+    def showcontents(self):
+        """content display hook for sub-classes"""
+        # See ToolTip for an example
+        raise NotImplementedError
+
+    def hidetip(self):
+        """hide the tooltip"""
+        # Note: This is called by __del__, so careful when overriding/extending
+        tw = self.tipwindow
+        self.tipwindow = None
+        if tw:
+            try:
+                tw.destroy()
+            except TclError:  # pragma: no cover
+                pass
+
+
+class OnHoverTooltipBase(TooltipBase):
+    """abstract base class for tooltips, with delayed on-hover display"""
+
+    def __init__(self, anchor_widget, hover_delay=1000):
+        """Create a tooltip with a mouse hover delay.
+
+        anchor_widget: the widget next to which the tooltip will be shown
+        hover_delay: time to delay before showing the tooltip, in milliseconds
+
+        Note that a widget will only be shown when showtip() is called,
+        e.g. after hovering over the anchor widget with the mouse for enough
+        time.
+        """
+        super().__init__(anchor_widget)
+        self.hover_delay = hover_delay
+
+        self._after_id = None
+        self._id1 = self.anchor_widget.bind("<Enter>", self._show_event)
+        self._id2 = self.anchor_widget.bind("<Leave>", self._hide_event)
+        self._id3 = self.anchor_widget.bind("<Button>", self._hide_event)
+
+    def __del__(self):
+        try:
+            self.anchor_widget.unbind("<Enter>", self._id1)
+            self.anchor_widget.unbind("<Leave>", self._id2)  # pragma: no cover
+            self.anchor_widget.unbind("<Button>", self._id3) # pragma: no cover
+        except TclError:
+            pass
+        super().__del__()
+
+    def _show_event(self, event=None):
+        """event handler to display the tooltip"""
+        if self.hover_delay:
+            self.schedule()
+        else:
+            self.showtip()
+
+    def _hide_event(self, event=None):
+        """event handler to hide the tooltip"""
+        self.hidetip()
+
+    def schedule(self):
+        """schedule the future display of the tooltip"""
+        self.unschedule()
+        self._after_id = self.anchor_widget.after(self.hover_delay,
+                                                  self.showtip)
+
+    def unschedule(self):
+        """cancel the future display of the tooltip"""
+        after_id = self._after_id
+        self._after_id = None
+        if after_id:
+            self.anchor_widget.after_cancel(after_id)
+
+    def hidetip(self):
+        """hide the tooltip"""
+        try:
+            self.unschedule()
+        except TclError:  # pragma: no cover
+            pass
+        super().hidetip()
+
+
+class Hovertip(OnHoverTooltipBase):
+    "A tooltip that pops up when a mouse hovers over an anchor widget."
+    def __init__(self, anchor_widget, text, hover_delay=1000,
+                 foreground="#000000", background="#ffffe0"):
+        """Create a text tooltip with a mouse hover delay.
+
+        anchor_widget: the widget next to which the tooltip will be shown
+        hover_delay: time to delay before showing the tooltip, in milliseconds
+
+        Note that a widget will only be shown when showtip() is called,
+        e.g. after hovering over the anchor widget with the mouse for enough
+        time.
+        """
+        super().__init__(anchor_widget, hover_delay=hover_delay)
+        self.text = text
+        self.foreground = foreground
+        self.background = background
+
+    def showcontents(self):
+        label = Label(self.tipwindow, text=self.text, justify=LEFT,
+                       relief=SOLID,  borderwidth=1,
+                       foreground=self.foreground, background=self.background)
+        label.pack()
+
+
+def _tooltip(parent):  # htest #
+    top = Toplevel(parent)
+    top.title("Test tooltip")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 150))
+    label = Label(top, text="Place your mouse over buttons")
+    label.pack()
+    button1 = Button(top, text="Button 1 -- 1/2 second hover delay")
+    button1.pack()
+    Hovertip(button1, "This is tooltip text for button1.", hover_delay=500)
+    button2 = Button(top, text="Button 2 -- no hover delay")
+    button2.pack()
+    Hovertip(button2, "This is tooltip\ntext for button2.", hover_delay=None)
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_tooltip', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_tooltip)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tree.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tree.py
new file mode 100644
index 0000000000000000000000000000000000000000..182ce7189614daf685f8bbac9f7bf45d5306f28e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/tree.py
@@ -0,0 +1,509 @@
+# XXX TO DO:
+# - popup menu
+# - support partial or total redisplay
+# - key bindings (instead of quick-n-dirty bindings on Canvas):
+#   - up/down arrow keys to move focus around
+#   - ditto for page up/down, home/end
+#   - left/right arrows to expand/collapse & move out/in
+# - more doc strings
+# - add icons for "file", "module", "class", "method"; better "python" icon
+# - callback for selection???
+# - multiple-item selection
+# - tooltips
+# - redo geometry without magic numbers
+# - keep track of object ids to allow more careful cleaning
+# - optimize tree redraw after expand of subnode
+
+import os
+
+from tkinter import *
+from tkinter.ttk import Frame, Scrollbar
+
+from idlelib.config import idleConf
+from idlelib import zoomheight
+
+ICONDIR = "Icons"
+
+# Look for Icons subdirectory in the same directory as this module
+try:
+    _icondir = os.path.join(os.path.dirname(__file__), ICONDIR)
+except NameError:
+    _icondir = ICONDIR
+if os.path.isdir(_icondir):
+    ICONDIR = _icondir
+elif not os.path.isdir(ICONDIR):
+    raise RuntimeError(f"can't find icon directory ({ICONDIR!r})")
+
+def listicons(icondir=ICONDIR):
+    """Utility to display the available icons."""
+    root = Tk()
+    import glob
+    list = glob.glob(os.path.join(glob.escape(icondir), "*.gif"))
+    list.sort()
+    images = []
+    row = column = 0
+    for file in list:
+        name = os.path.splitext(os.path.basename(file))[0]
+        image = PhotoImage(file=file, master=root)
+        images.append(image)
+        label = Label(root, image=image, bd=1, relief="raised")
+        label.grid(row=row, column=column)
+        label = Label(root, text=name)
+        label.grid(row=row+1, column=column)
+        column = column + 1
+        if column >= 10:
+            row = row+2
+            column = 0
+    root.images = images
+
+def wheel_event(event, widget=None):
+    """Handle scrollwheel event.
+
+    For wheel up, event.delta = 120*n on Windows, -1*n on darwin,
+    where n can be > 1 if one scrolls fast.  Flicking the wheel
+    generates up to maybe 20 events with n up to 10 or more 1.
+    Macs use wheel down (delta = 1*n) to scroll up, so positive
+    delta means to scroll up on both systems.
+
+    X-11 sends Control-Button-4,5 events instead.
+
+    The widget parameter is needed so browser label bindings can pass
+    the underlying canvas.
+
+    This function depends on widget.yview to not be overridden by
+    a subclass.
+    """
+    up = {EventType.MouseWheel: event.delta > 0,
+          EventType.ButtonPress: event.num == 4}
+    lines = -5 if up[event.type] else 5
+    widget = event.widget if widget is None else widget
+    widget.yview(SCROLL, lines, 'units')
+    return 'break'
+
+
+class TreeNode:
+
+    dy = 0
+
+    def __init__(self, canvas, parent, item):
+        self.canvas = canvas
+        self.parent = parent
+        self.item = item
+        self.state = 'collapsed'
+        self.selected = False
+        self.children = []
+        self.x = self.y = None
+        self.iconimages = {} # cache of PhotoImage instances for icons
+
+    def destroy(self):
+        for c in self.children[:]:
+            self.children.remove(c)
+            c.destroy()
+        self.parent = None
+
+    def geticonimage(self, name):
+        try:
+            return self.iconimages[name]
+        except KeyError:
+            pass
+        file, ext = os.path.splitext(name)
+        ext = ext or ".gif"
+        fullname = os.path.join(ICONDIR, file + ext)
+        image = PhotoImage(master=self.canvas, file=fullname)
+        self.iconimages[name] = image
+        return image
+
+    def select(self, event=None):
+        if self.selected:
+            return
+        self.deselectall()
+        self.selected = True
+        self.canvas.delete(self.image_id)
+        self.drawicon()
+        self.drawtext()
+
+    def deselect(self, event=None):
+        if not self.selected:
+            return
+        self.selected = False
+        self.canvas.delete(self.image_id)
+        self.drawicon()
+        self.drawtext()
+
+    def deselectall(self):
+        if self.parent:
+            self.parent.deselectall()
+        else:
+            self.deselecttree()
+
+    def deselecttree(self):
+        if self.selected:
+            self.deselect()
+        for child in self.children:
+            child.deselecttree()
+
+    def flip(self, event=None):
+        if self.state == 'expanded':
+            self.collapse()
+        else:
+            self.expand()
+        self.item.OnDoubleClick()
+        return "break"
+
+    def expand(self, event=None):
+        if not self.item._IsExpandable():
+            return
+        if self.state != 'expanded':
+            self.state = 'expanded'
+            self.update()
+            self.view()
+
+    def collapse(self, event=None):
+        if self.state != 'collapsed':
+            self.state = 'collapsed'
+            self.update()
+
+    def view(self):
+        top = self.y - 2
+        bottom = self.lastvisiblechild().y + 17
+        height = bottom - top
+        visible_top = self.canvas.canvasy(0)
+        visible_height = self.canvas.winfo_height()
+        visible_bottom = self.canvas.canvasy(visible_height)
+        if visible_top <= top and bottom <= visible_bottom:
+            return
+        x0, y0, x1, y1 = self.canvas._getints(self.canvas['scrollregion'])
+        if top >= visible_top and height <= visible_height:
+            fraction = top + height - visible_height
+        else:
+            fraction = top
+        fraction = float(fraction) / y1
+        self.canvas.yview_moveto(fraction)
+
+    def lastvisiblechild(self):
+        if self.children and self.state == 'expanded':
+            return self.children[-1].lastvisiblechild()
+        else:
+            return self
+
+    def update(self):
+        if self.parent:
+            self.parent.update()
+        else:
+            oldcursor = self.canvas['cursor']
+            self.canvas['cursor'] = "watch"
+            self.canvas.update()
+            self.canvas.delete(ALL)     # XXX could be more subtle
+            self.draw(7, 2)
+            x0, y0, x1, y1 = self.canvas.bbox(ALL)
+            self.canvas.configure(scrollregion=(0, 0, x1, y1))
+            self.canvas['cursor'] = oldcursor
+
+    def draw(self, x, y):
+        # XXX This hard-codes too many geometry constants!
+        self.x, self.y = x, y
+        self.drawicon()
+        self.drawtext()
+        if self.state != 'expanded':
+            return y + TreeNode.dy
+        # draw children
+        if not self.children:
+            sublist = self.item._GetSubList()
+            if not sublist:
+                # _IsExpandable() was mistaken; that's allowed
+                return y + TreeNode.dy
+            for item in sublist:
+                child = self.__class__(self.canvas, self, item)
+                self.children.append(child)
+        cx = x+20
+        cy = y + TreeNode.dy
+        cylast = 0
+        for child in self.children:
+            cylast = cy
+            self.canvas.create_line(x+9, cy+7, cx, cy+7, fill="gray50")
+            cy = child.draw(cx, cy)
+            if child.item._IsExpandable():
+                if child.state == 'expanded':
+                    iconname = "minusnode"
+                    callback = child.collapse
+                else:
+                    iconname = "plusnode"
+                    callback = child.expand
+                image = self.geticonimage(iconname)
+                id = self.canvas.create_image(x+9, cylast+7, image=image)
+                # XXX This leaks bindings until canvas is deleted:
+                self.canvas.tag_bind(id, "<1>", callback)
+                self.canvas.tag_bind(id, "<Double-1>", lambda x: None)
+        id = self.canvas.create_line(x+9, y+10, x+9, cylast+7,
+            ##stipple="gray50",     # XXX Seems broken in Tk 8.0.x
+            fill="gray50")
+        self.canvas.tag_lower(id) # XXX .lower(id) before Python 1.5.2
+        return cy
+
+    def drawicon(self):
+        if self.selected:
+            imagename = (self.item.GetSelectedIconName() or
+                         self.item.GetIconName() or
+                         "openfolder")
+        else:
+            imagename = self.item.GetIconName() or "folder"
+        image = self.geticonimage(imagename)
+        id = self.canvas.create_image(self.x, self.y, anchor="nw", image=image)
+        self.image_id = id
+        self.canvas.tag_bind(id, "<1>", self.select)
+        self.canvas.tag_bind(id, "<Double-1>", self.flip)
+
+    def drawtext(self):
+        textx = self.x+20-1
+        texty = self.y-4
+        labeltext = self.item.GetLabelText()
+        if labeltext:
+            id = self.canvas.create_text(textx, texty, anchor="nw",
+                                         text=labeltext)
+            self.canvas.tag_bind(id, "<1>", self.select)
+            self.canvas.tag_bind(id, "<Double-1>", self.flip)
+            x0, y0, x1, y1 = self.canvas.bbox(id)
+            textx = max(x1, 200) + 10
+        text = self.item.GetText() or "<no text>"
+        try:
+            self.entry
+        except AttributeError:
+            pass
+        else:
+            self.edit_finish()
+        try:
+            self.label
+        except AttributeError:
+            # padding carefully selected (on Windows) to match Entry widget:
+            self.label = Label(self.canvas, text=text, bd=0, padx=2, pady=2)
+        theme = idleConf.CurrentTheme()
+        if self.selected:
+            self.label.configure(idleConf.GetHighlight(theme, 'hilite'))
+        else:
+            self.label.configure(idleConf.GetHighlight(theme, 'normal'))
+        id = self.canvas.create_window(textx, texty,
+                                       anchor="nw", window=self.label)
+        self.label.bind("<1>", self.select_or_edit)
+        self.label.bind("<Double-1>", self.flip)
+        self.label.bind("<MouseWheel>", lambda e: wheel_event(e, self.canvas))
+        if self.label._windowingsystem == 'x11':
+            self.label.bind("<Button-4>", lambda e: wheel_event(e, self.canvas))
+            self.label.bind("<Button-5>", lambda e: wheel_event(e, self.canvas))
+        self.text_id = id
+        if TreeNode.dy == 0:
+            # The first row doesn't matter what the dy is, just measure its
+            # size to get the value of the subsequent dy
+            coords = self.canvas.bbox(id)
+            TreeNode.dy = max(20, coords[3] - coords[1] - 3)
+
+    def select_or_edit(self, event=None):
+        if self.selected and self.item.IsEditable():
+            self.edit(event)
+        else:
+            self.select(event)
+
+    def edit(self, event=None):
+        self.entry = Entry(self.label, bd=0, highlightthickness=1, width=0)
+        self.entry.insert(0, self.label['text'])
+        self.entry.selection_range(0, END)
+        self.entry.pack(ipadx=5)
+        self.entry.focus_set()
+        self.entry.bind("<Return>", self.edit_finish)
+        self.entry.bind("<Escape>", self.edit_cancel)
+
+    def edit_finish(self, event=None):
+        try:
+            entry = self.entry
+            del self.entry
+        except AttributeError:
+            return
+        text = entry.get()
+        entry.destroy()
+        if text and text != self.item.GetText():
+            self.item.SetText(text)
+        text = self.item.GetText()
+        self.label['text'] = text
+        self.drawtext()
+        self.canvas.focus_set()
+
+    def edit_cancel(self, event=None):
+        try:
+            entry = self.entry
+            del self.entry
+        except AttributeError:
+            return
+        entry.destroy()
+        self.drawtext()
+        self.canvas.focus_set()
+
+
+class TreeItem:
+
+    """Abstract class representing tree items.
+
+    Methods should typically be overridden, otherwise a default action
+    is used.
+
+    """
+
+    def __init__(self):
+        """Constructor.  Do whatever you need to do."""
+
+    def GetText(self):
+        """Return text string to display."""
+
+    def GetLabelText(self):
+        """Return label text string to display in front of text (if any)."""
+
+    expandable = None
+
+    def _IsExpandable(self):
+        """Do not override!  Called by TreeNode."""
+        if self.expandable is None:
+            self.expandable = self.IsExpandable()
+        return self.expandable
+
+    def IsExpandable(self):
+        """Return whether there are subitems."""
+        return 1
+
+    def _GetSubList(self):
+        """Do not override!  Called by TreeNode."""
+        if not self.IsExpandable():
+            return []
+        sublist = self.GetSubList()
+        if not sublist:
+            self.expandable = 0
+        return sublist
+
+    def IsEditable(self):
+        """Return whether the item's text may be edited."""
+
+    def SetText(self, text):
+        """Change the item's text (if it is editable)."""
+
+    def GetIconName(self):
+        """Return name of icon to be displayed normally."""
+
+    def GetSelectedIconName(self):
+        """Return name of icon to be displayed when selected."""
+
+    def GetSubList(self):
+        """Return list of items forming sublist."""
+
+    def OnDoubleClick(self):
+        """Called on a double-click on the item."""
+
+
+# Example application
+
+class FileTreeItem(TreeItem):
+
+    """Example TreeItem subclass -- browse the file system."""
+
+    def __init__(self, path):
+        self.path = path
+
+    def GetText(self):
+        return os.path.basename(self.path) or self.path
+
+    def IsEditable(self):
+        return os.path.basename(self.path) != ""
+
+    def SetText(self, text):
+        newpath = os.path.dirname(self.path)
+        newpath = os.path.join(newpath, text)
+        if os.path.dirname(newpath) != os.path.dirname(self.path):
+            return
+        try:
+            os.rename(self.path, newpath)
+            self.path = newpath
+        except OSError:
+            pass
+
+    def GetIconName(self):
+        if not self.IsExpandable():
+            return "python" # XXX wish there was a "file" icon
+
+    def IsExpandable(self):
+        return os.path.isdir(self.path)
+
+    def GetSubList(self):
+        try:
+            names = os.listdir(self.path)
+        except OSError:
+            return []
+        names.sort(key = os.path.normcase)
+        sublist = []
+        for name in names:
+            item = FileTreeItem(os.path.join(self.path, name))
+            sublist.append(item)
+        return sublist
+
+
+# A canvas widget with scroll bars and some useful bindings
+
+class ScrolledCanvas:
+
+    def __init__(self, master, **opts):
+        if 'yscrollincrement' not in opts:
+            opts['yscrollincrement'] = 17
+        self.master = master
+        self.frame = Frame(master)
+        self.frame.rowconfigure(0, weight=1)
+        self.frame.columnconfigure(0, weight=1)
+        self.canvas = Canvas(self.frame, **opts)
+        self.canvas.grid(row=0, column=0, sticky="nsew")
+        self.vbar = Scrollbar(self.frame, name="vbar")
+        self.vbar.grid(row=0, column=1, sticky="nse")
+        self.hbar = Scrollbar(self.frame, name="hbar", orient="horizontal")
+        self.hbar.grid(row=1, column=0, sticky="ews")
+        self.canvas['yscrollcommand'] = self.vbar.set
+        self.vbar['command'] = self.canvas.yview
+        self.canvas['xscrollcommand'] = self.hbar.set
+        self.hbar['command'] = self.canvas.xview
+        self.canvas.bind("<Key-Prior>", self.page_up)
+        self.canvas.bind("<Key-Next>", self.page_down)
+        self.canvas.bind("<Key-Up>", self.unit_up)
+        self.canvas.bind("<Key-Down>", self.unit_down)
+        self.canvas.bind("<MouseWheel>", wheel_event)
+        if self.canvas._windowingsystem == 'x11':
+            self.canvas.bind("<Button-4>", wheel_event)
+            self.canvas.bind("<Button-5>", wheel_event)
+        #if isinstance(master, Toplevel) or isinstance(master, Tk):
+        self.canvas.bind("<Alt-Key-2>", self.zoom_height)
+        self.canvas.focus_set()
+    def page_up(self, event):
+        self.canvas.yview_scroll(-1, "page")
+        return "break"
+    def page_down(self, event):
+        self.canvas.yview_scroll(1, "page")
+        return "break"
+    def unit_up(self, event):
+        self.canvas.yview_scroll(-1, "unit")
+        return "break"
+    def unit_down(self, event):
+        self.canvas.yview_scroll(1, "unit")
+        return "break"
+    def zoom_height(self, event):
+        zoomheight.zoom_height(self.master)
+        return "break"
+
+
+def _tree_widget(parent):  # htest #
+    top = Toplevel(parent)
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x+50, y+175))
+    sc = ScrolledCanvas(top, bg="white", highlightthickness=0, takefocus=1)
+    sc.frame.pack(expand=1, fill="both", side=LEFT)
+    item = FileTreeItem(ICONDIR)
+    node = TreeNode(sc.canvas, None, item)
+    node.expand()
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_tree', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_tree_widget)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/undo.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/undo.py
new file mode 100644
index 0000000000000000000000000000000000000000..f52446d5fcdcf84ee6aeb660feb5dfe42e640cbe
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/undo.py
@@ -0,0 +1,367 @@
+import string
+
+from idlelib.delegator import Delegator
+
+# tkinter import not needed because module does not create widgets,
+# although many methods operate on text widget arguments.
+
+#$ event <<redo>>
+#$ win <Control-y>
+#$ unix <Alt-z>
+
+#$ event <<undo>>
+#$ win <Control-z>
+#$ unix <Control-z>
+
+#$ event <<dump-undo-state>>
+#$ win <Control-backslash>
+#$ unix <Control-backslash>
+
+
+class UndoDelegator(Delegator):
+
+    max_undo = 1000
+
+    def __init__(self):
+        Delegator.__init__(self)
+        self.reset_undo()
+
+    def setdelegate(self, delegate):
+        if self.delegate is not None:
+            self.unbind("<<undo>>")
+            self.unbind("<<redo>>")
+            self.unbind("<<dump-undo-state>>")
+        Delegator.setdelegate(self, delegate)
+        if delegate is not None:
+            self.bind("<<undo>>", self.undo_event)
+            self.bind("<<redo>>", self.redo_event)
+            self.bind("<<dump-undo-state>>", self.dump_event)
+
+    def dump_event(self, event):
+        from pprint import pprint
+        pprint(self.undolist[:self.pointer])
+        print("pointer:", self.pointer, end=' ')
+        print("saved:", self.saved, end=' ')
+        print("can_merge:", self.can_merge, end=' ')
+        print("get_saved():", self.get_saved())
+        pprint(self.undolist[self.pointer:])
+        return "break"
+
+    def reset_undo(self):
+        self.was_saved = -1
+        self.pointer = 0
+        self.undolist = []
+        self.undoblock = 0  # or a CommandSequence instance
+        self.set_saved(1)
+
+    def set_saved(self, flag):
+        if flag:
+            self.saved = self.pointer
+        else:
+            self.saved = -1
+        self.can_merge = False
+        self.check_saved()
+
+    def get_saved(self):
+        return self.saved == self.pointer
+
+    saved_change_hook = None
+
+    def set_saved_change_hook(self, hook):
+        self.saved_change_hook = hook
+
+    was_saved = -1
+
+    def check_saved(self):
+        is_saved = self.get_saved()
+        if is_saved != self.was_saved:
+            self.was_saved = is_saved
+            if self.saved_change_hook:
+                self.saved_change_hook()
+
+    def insert(self, index, chars, tags=None):
+        self.addcmd(InsertCommand(index, chars, tags))
+
+    def delete(self, index1, index2=None):
+        self.addcmd(DeleteCommand(index1, index2))
+
+    # Clients should call undo_block_start() and undo_block_stop()
+    # around a sequence of editing cmds to be treated as a unit by
+    # undo & redo.  Nested matching calls are OK, and the inner calls
+    # then act like nops.  OK too if no editing cmds, or only one
+    # editing cmd, is issued in between:  if no cmds, the whole
+    # sequence has no effect; and if only one cmd, that cmd is entered
+    # directly into the undo list, as if undo_block_xxx hadn't been
+    # called.  The intent of all that is to make this scheme easy
+    # to use:  all the client has to worry about is making sure each
+    # _start() call is matched by a _stop() call.
+
+    def undo_block_start(self):
+        if self.undoblock == 0:
+            self.undoblock = CommandSequence()
+        self.undoblock.bump_depth()
+
+    def undo_block_stop(self):
+        if self.undoblock.bump_depth(-1) == 0:
+            cmd = self.undoblock
+            self.undoblock = 0
+            if len(cmd) > 0:
+                if len(cmd) == 1:
+                    # no need to wrap a single cmd
+                    cmd = cmd.getcmd(0)
+                # this blk of cmds, or single cmd, has already
+                # been done, so don't execute it again
+                self.addcmd(cmd, 0)
+
+    def addcmd(self, cmd, execute=True):
+        if execute:
+            cmd.do(self.delegate)
+        if self.undoblock != 0:
+            self.undoblock.append(cmd)
+            return
+        if self.can_merge and self.pointer > 0:
+            lastcmd = self.undolist[self.pointer-1]
+            if lastcmd.merge(cmd):
+                return
+        self.undolist[self.pointer:] = [cmd]
+        if self.saved > self.pointer:
+            self.saved = -1
+        self.pointer = self.pointer + 1
+        if len(self.undolist) > self.max_undo:
+            ##print "truncating undo list"
+            del self.undolist[0]
+            self.pointer = self.pointer - 1
+            if self.saved >= 0:
+                self.saved = self.saved - 1
+        self.can_merge = True
+        self.check_saved()
+
+    def undo_event(self, event):
+        if self.pointer == 0:
+            self.bell()
+            return "break"
+        cmd = self.undolist[self.pointer - 1]
+        cmd.undo(self.delegate)
+        self.pointer = self.pointer - 1
+        self.can_merge = False
+        self.check_saved()
+        return "break"
+
+    def redo_event(self, event):
+        if self.pointer >= len(self.undolist):
+            self.bell()
+            return "break"
+        cmd = self.undolist[self.pointer]
+        cmd.redo(self.delegate)
+        self.pointer = self.pointer + 1
+        self.can_merge = False
+        self.check_saved()
+        return "break"
+
+
+class Command:
+    # Base class for Undoable commands
+
+    tags = None
+
+    def __init__(self, index1, index2, chars, tags=None):
+        self.marks_before = {}
+        self.marks_after = {}
+        self.index1 = index1
+        self.index2 = index2
+        self.chars = chars
+        if tags:
+            self.tags = tags
+
+    def __repr__(self):
+        s = self.__class__.__name__
+        t = (self.index1, self.index2, self.chars, self.tags)
+        if self.tags is None:
+            t = t[:-1]
+        return s + repr(t)
+
+    def do(self, text):
+        pass
+
+    def redo(self, text):
+        pass
+
+    def undo(self, text):
+        pass
+
+    def merge(self, cmd):
+        return 0
+
+    def save_marks(self, text):
+        marks = {}
+        for name in text.mark_names():
+            if name != "insert" and name != "current":
+                marks[name] = text.index(name)
+        return marks
+
+    def set_marks(self, text, marks):
+        for name, index in marks.items():
+            text.mark_set(name, index)
+
+
+class InsertCommand(Command):
+    # Undoable insert command
+
+    def __init__(self, index1, chars, tags=None):
+        Command.__init__(self, index1, None, chars, tags)
+
+    def do(self, text):
+        self.marks_before = self.save_marks(text)
+        self.index1 = text.index(self.index1)
+        if text.compare(self.index1, ">", "end-1c"):
+            # Insert before the final newline
+            self.index1 = text.index("end-1c")
+        text.insert(self.index1, self.chars, self.tags)
+        self.index2 = text.index("%s+%dc" % (self.index1, len(self.chars)))
+        self.marks_after = self.save_marks(text)
+        ##sys.__stderr__.write("do: %s\n" % self)
+
+    def redo(self, text):
+        text.mark_set('insert', self.index1)
+        text.insert(self.index1, self.chars, self.tags)
+        self.set_marks(text, self.marks_after)
+        text.see('insert')
+        ##sys.__stderr__.write("redo: %s\n" % self)
+
+    def undo(self, text):
+        text.mark_set('insert', self.index1)
+        text.delete(self.index1, self.index2)
+        self.set_marks(text, self.marks_before)
+        text.see('insert')
+        ##sys.__stderr__.write("undo: %s\n" % self)
+
+    def merge(self, cmd):
+        if self.__class__ is not cmd.__class__:
+            return False
+        if self.index2 != cmd.index1:
+            return False
+        if self.tags != cmd.tags:
+            return False
+        if len(cmd.chars) != 1:
+            return False
+        if self.chars and \
+           self.classify(self.chars[-1]) != self.classify(cmd.chars):
+            return False
+        self.index2 = cmd.index2
+        self.chars = self.chars + cmd.chars
+        return True
+
+    alphanumeric = string.ascii_letters + string.digits + "_"
+
+    def classify(self, c):
+        if c in self.alphanumeric:
+            return "alphanumeric"
+        if c == "\n":
+            return "newline"
+        return "punctuation"
+
+
+class DeleteCommand(Command):
+    # Undoable delete command
+
+    def __init__(self, index1, index2=None):
+        Command.__init__(self, index1, index2, None, None)
+
+    def do(self, text):
+        self.marks_before = self.save_marks(text)
+        self.index1 = text.index(self.index1)
+        if self.index2:
+            self.index2 = text.index(self.index2)
+        else:
+            self.index2 = text.index(self.index1 + " +1c")
+        if text.compare(self.index2, ">", "end-1c"):
+            # Don't delete the final newline
+            self.index2 = text.index("end-1c")
+        self.chars = text.get(self.index1, self.index2)
+        text.delete(self.index1, self.index2)
+        self.marks_after = self.save_marks(text)
+        ##sys.__stderr__.write("do: %s\n" % self)
+
+    def redo(self, text):
+        text.mark_set('insert', self.index1)
+        text.delete(self.index1, self.index2)
+        self.set_marks(text, self.marks_after)
+        text.see('insert')
+        ##sys.__stderr__.write("redo: %s\n" % self)
+
+    def undo(self, text):
+        text.mark_set('insert', self.index1)
+        text.insert(self.index1, self.chars)
+        self.set_marks(text, self.marks_before)
+        text.see('insert')
+        ##sys.__stderr__.write("undo: %s\n" % self)
+
+
+class CommandSequence(Command):
+    # Wrapper for a sequence of undoable cmds to be undone/redone
+    # as a unit
+
+    def __init__(self):
+        self.cmds = []
+        self.depth = 0
+
+    def __repr__(self):
+        s = self.__class__.__name__
+        strs = []
+        for cmd in self.cmds:
+            strs.append(f"    {cmd!r}")
+        return s + "(\n" + ",\n".join(strs) + "\n)"
+
+    def __len__(self):
+        return len(self.cmds)
+
+    def append(self, cmd):
+        self.cmds.append(cmd)
+
+    def getcmd(self, i):
+        return self.cmds[i]
+
+    def redo(self, text):
+        for cmd in self.cmds:
+            cmd.redo(text)
+
+    def undo(self, text):
+        cmds = self.cmds[:]
+        cmds.reverse()
+        for cmd in cmds:
+            cmd.undo(text)
+
+    def bump_depth(self, incr=1):
+        self.depth = self.depth + incr
+        return self.depth
+
+
+def _undo_delegator(parent):  # htest #
+    from tkinter import Toplevel, Text, Button
+    from idlelib.percolator import Percolator
+    top = Toplevel(parent)
+    top.title("Test UndoDelegator")
+    x, y = map(int, parent.geometry().split('+')[1:])
+    top.geometry("+%d+%d" % (x, y + 175))
+
+    text = Text(top, height=10)
+    text.pack()
+    text.focus_set()
+    p = Percolator(text)
+    d = UndoDelegator()
+    p.insertfilter(d)
+
+    undo = Button(top, text="Undo", command=lambda:d.undo_event(None))
+    undo.pack(side='left')
+    redo = Button(top, text="Redo", command=lambda:d.redo_event(None))
+    redo.pack(side='left')
+    dump = Button(top, text="Dump", command=lambda:d.dump_event(None))
+    dump.pack(side='left')
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_undo', verbosity=2, exit=False)
+
+    from idlelib.idle_test.htest import run
+    run(_undo_delegator)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..e05604ab4853f6dbf342ccf874ba6ee9dd85d11b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/util.py
@@ -0,0 +1,37 @@
+"""
+Idlelib objects with no external idlelib dependencies
+which are needed in more than one idlelib module.
+
+They are included here because
+    a) they don't particularly belong elsewhere; or
+    b) because inclusion here simplifies the idlelib dependency graph.
+
+TODO:
+    * Python versions (editor and help_about),
+    * tk version and patchlevel (pyshell, help_about, maxos?, editor?),
+    * std streams (pyshell, run),
+    * warning stuff (pyshell, run).
+"""
+import sys
+
+# .pyw is for Windows; .pyi is for typing stub files.
+# The extension order is needed for iomenu open/save dialogs.
+py_extensions = ('.py', '.pyw', '.pyi')
+
+
+# Fix for HiDPI screens on Windows.  CALL BEFORE ANY TK OPERATIONS!
+# URL for arguments for the ...Awareness call below.
+# https://msdn.microsoft.com/en-us/library/windows/desktop/dn280512(v=vs.85).aspx
+if sys.platform == 'win32':  # pragma: no cover
+    def fix_win_hidpi():  # Called in pyshell and turtledemo.
+        try:
+            import ctypes
+            PROCESS_SYSTEM_DPI_AWARE = 1  # Int required.
+            ctypes.OleDLL('shcore').SetProcessDpiAwareness(PROCESS_SYSTEM_DPI_AWARE)
+        except (ImportError, AttributeError, OSError):
+            pass
+
+
+if __name__ == '__main__':
+    from unittest import main
+    main('idlelib.idle_test.test_util', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/window.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/window.py
new file mode 100644
index 0000000000000000000000000000000000000000..460d5b67948dde2e1eee32fa548fdd289e3512de
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/window.py
@@ -0,0 +1,98 @@
+from tkinter import Toplevel, TclError
+import sys
+
+
+class WindowList:
+
+    def __init__(self):
+        self.dict = {}
+        self.callbacks = []
+
+    def add(self, window):
+        window.after_idle(self.call_callbacks)
+        self.dict[str(window)] = window
+
+    def delete(self, window):
+        try:
+            del self.dict[str(window)]
+        except KeyError:
+            # Sometimes, destroy() is called twice
+            pass
+        self.call_callbacks()
+
+    def add_windows_to_menu(self,  menu):
+        list = []
+        for key in self.dict:
+            window = self.dict[key]
+            try:
+                title = window.get_title()
+            except TclError:
+                continue
+            list.append((title, key, window))
+        list.sort()
+        for title, key, window in list:
+            menu.add_command(label=title, command=window.wakeup)
+
+    def register_callback(self, callback):
+        self.callbacks.append(callback)
+
+    def unregister_callback(self, callback):
+        try:
+            self.callbacks.remove(callback)
+        except ValueError:
+            pass
+
+    def call_callbacks(self):
+        for callback in self.callbacks:
+            try:
+                callback()
+            except:
+                t, v, tb = sys.exc_info()
+                print("warning: callback failed in WindowList", t, ":", v)
+
+
+registry = WindowList()
+
+add_windows_to_menu = registry.add_windows_to_menu
+register_callback = registry.register_callback
+unregister_callback = registry.unregister_callback
+
+
+class ListedToplevel(Toplevel):
+
+    def __init__(self, master, **kw):
+        Toplevel.__init__(self, master, kw)
+        registry.add(self)
+        self.focused_widget = self
+
+    def destroy(self):
+        registry.delete(self)
+        Toplevel.destroy(self)
+        # If this is Idle's last window then quit the mainloop
+        # (Needed for clean exit on Windows 98)
+        if not registry.dict:
+            self.quit()
+
+    def update_windowlist_registry(self, window):
+        registry.call_callbacks()
+
+    def get_title(self):
+        # Subclass can override
+        return self.wm_title()
+
+    def wakeup(self):
+        try:
+            if self.wm_state() == "iconic":
+                self.wm_withdraw()
+                self.wm_deiconify()
+            self.tkraise()
+            self.focused_widget.focus_set()
+        except TclError:
+            # This can happen when the Window menu was torn off.
+            # Simply ignore it.
+            pass
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_window', verbosity=2)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zoomheight.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zoomheight.py
new file mode 100644
index 0000000000000000000000000000000000000000..cd50c91c183e493a9daf76ecd7ad17ede0675d1b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zoomheight.py
@@ -0,0 +1,124 @@
+"Zoom a window to maximum height."
+
+import re
+import sys
+import tkinter
+
+
+class WmInfoGatheringError(Exception):
+    pass
+
+
+class ZoomHeight:
+    # Cached values for maximized window dimensions, one for each set
+    # of screen dimensions.
+    _max_height_and_y_coords = {}
+
+    def __init__(self, editwin):
+        self.editwin = editwin
+        self.top = self.editwin.top
+
+    def zoom_height_event(self, event=None):
+        zoomed = self.zoom_height()
+
+        if zoomed is None:
+            self.top.bell()
+        else:
+            menu_status = 'Restore' if zoomed else 'Zoom'
+            self.editwin.update_menu_label(menu='options', index='* Height',
+                                           label=f'{menu_status} Height')
+
+        return "break"
+
+    def zoom_height(self):
+        top = self.top
+
+        width, height, x, y = get_window_geometry(top)
+
+        if top.wm_state() != 'normal':
+            # Can't zoom/restore window height for windows not in the 'normal'
+            # state, e.g. maximized and full-screen windows.
+            return None
+
+        try:
+            maxheight, maxy = self.get_max_height_and_y_coord()
+        except WmInfoGatheringError:
+            return None
+
+        if height != maxheight:
+            # Maximize the window's height.
+            set_window_geometry(top, (width, maxheight, x, maxy))
+            return True
+        else:
+            # Restore the window's height.
+            #
+            # .wm_geometry('') makes the window revert to the size requested
+            # by the widgets it contains.
+            top.wm_geometry('')
+            return False
+
+    def get_max_height_and_y_coord(self):
+        top = self.top
+
+        screen_dimensions = (top.winfo_screenwidth(),
+                             top.winfo_screenheight())
+        if screen_dimensions not in self._max_height_and_y_coords:
+            orig_state = top.wm_state()
+
+            # Get window geometry info for maximized windows.
+            try:
+                top.wm_state('zoomed')
+            except tkinter.TclError:
+                # The 'zoomed' state is not supported by some esoteric WMs,
+                # such as Xvfb.
+                raise WmInfoGatheringError(
+                    'Failed getting geometry of maximized windows, because ' +
+                    'the "zoomed" window state is unavailable.')
+            top.update()
+            maxwidth, maxheight, maxx, maxy = get_window_geometry(top)
+            if sys.platform == 'win32':
+                # On Windows, the returned Y coordinate is the one before
+                # maximizing, so we use 0 which is correct unless a user puts
+                # their dock on the top of the screen (very rare).
+                maxy = 0
+            maxrooty = top.winfo_rooty()
+
+            # Get the "root y" coordinate for non-maximized windows with their
+            # y coordinate set to that of maximized windows.  This is needed
+            # to properly handle different title bar heights for non-maximized
+            # vs. maximized windows, as seen e.g. in Windows 10.
+            top.wm_state('normal')
+            top.update()
+            orig_geom = get_window_geometry(top)
+            max_y_geom = orig_geom[:3] + (maxy,)
+            set_window_geometry(top, max_y_geom)
+            top.update()
+            max_y_geom_rooty = top.winfo_rooty()
+
+            # Adjust the maximum window height to account for the different
+            # title bar heights of non-maximized vs. maximized windows.
+            maxheight += maxrooty - max_y_geom_rooty
+
+            self._max_height_and_y_coords[screen_dimensions] = maxheight, maxy
+
+            set_window_geometry(top, orig_geom)
+            top.wm_state(orig_state)
+
+        return self._max_height_and_y_coords[screen_dimensions]
+
+
+def get_window_geometry(top):
+    geom = top.wm_geometry()
+    m = re.match(r"(\d+)x(\d+)\+(-?\d+)\+(-?\d+)", geom)
+    return tuple(map(int, m.groups()))
+
+
+def set_window_geometry(top, geometry):
+    top.wm_geometry("{:d}x{:d}+{:d}+{:d}".format(*geometry))
+
+
+if __name__ == "__main__":
+    from unittest import main
+    main('idlelib.idle_test.test_zoomheight', verbosity=2, exit=False)
+
+    # Add htest?
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zzdummy.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zzdummy.py
new file mode 100644
index 0000000000000000000000000000000000000000..1247e8f1cc052860b173e9959deaf134d4b6906a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/idlelib/zzdummy.py
@@ -0,0 +1,73 @@
+"""Example extension, also used for testing.
+
+See extend.txt for more details on creating an extension.
+See config-extension.def for configuring an extension.
+"""
+
+from idlelib.config import idleConf
+from functools import wraps
+
+
+def format_selection(format_line):
+    "Apply a formatting function to all of the selected lines."
+
+    @wraps(format_line)
+    def apply(self, event=None):
+        head, tail, chars, lines = self.formatter.get_region()
+        for pos in range(len(lines) - 1):
+            line = lines[pos]
+            lines[pos] = format_line(self, line)
+        self.formatter.set_region(head, tail, chars, lines)
+        return 'break'
+
+    return apply
+
+
+class ZzDummy:
+    """Prepend or remove initial text from selected lines."""
+
+    # Extend the format menu.
+    menudefs = [
+        ('format', [
+            ('Z in', '<<z-in>>'),
+            ('Z out', '<<z-out>>'),
+        ] )
+    ]
+
+    def __init__(self, editwin):
+        "Initialize the settings for this extension."
+        self.editwin = editwin
+        self.text = editwin.text
+        self.formatter = editwin.fregion
+
+    @classmethod
+    def reload(cls):
+        "Load class variables from config."
+        cls.ztext = idleConf.GetOption('extensions', 'ZzDummy', 'z-text')
+
+    @format_selection
+    def z_in_event(self, line):
+        """Insert text at the beginning of each selected line.
+
+        This is bound to the <<z-in>> virtual event when the extensions
+        are loaded.
+        """
+        return f'{self.ztext}{line}'
+
+    @format_selection
+    def z_out_event(self, line):
+        """Remove specific text from the beginning of each selected line.
+
+        This is bound to the <<z-out>> virtual event when the extensions
+        are loaded.
+        """
+        zlength = 0 if not line.startswith(self.ztext) else len(self.ztext)
+        return line[zlength:]
+
+
+ZzDummy.reload()
+
+
+if __name__ == "__main__":
+    import unittest
+    unittest.main('idlelib.idle_test.test_zzdummy', verbosity=2, exit=False)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..a7d57561ead046c481d4d78bf33a6726185e399d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/__init__.py
@@ -0,0 +1,136 @@
+"""A pure Python implementation of import."""
+__all__ = ['__import__', 'import_module', 'invalidate_caches', 'reload']
+
+# Bootstrap help #####################################################
+
+# Until bootstrapping is complete, DO NOT import any modules that attempt
+# to import importlib._bootstrap (directly or indirectly). Since this
+# partially initialised package would be present in sys.modules, those
+# modules would get an uninitialised copy of the source version, instead
+# of a fully initialised version (either the frozen one or the one
+# initialised below if the frozen one is not available).
+import _imp  # Just the builtin component, NOT the full Python module
+import sys
+
+try:
+    import _frozen_importlib as _bootstrap
+except ImportError:
+    from . import _bootstrap
+    _bootstrap._setup(sys, _imp)
+else:
+    # importlib._bootstrap is the built-in import, ensure we don't create
+    # a second copy of the module.
+    _bootstrap.__name__ = 'importlib._bootstrap'
+    _bootstrap.__package__ = 'importlib'
+    try:
+        _bootstrap.__file__ = __file__.replace('__init__.py', '_bootstrap.py')
+    except NameError:
+        # __file__ is not guaranteed to be defined, e.g. if this code gets
+        # frozen by a tool like cx_Freeze.
+        pass
+    sys.modules['importlib._bootstrap'] = _bootstrap
+
+try:
+    import _frozen_importlib_external as _bootstrap_external
+except ImportError:
+    from . import _bootstrap_external
+    _bootstrap_external._set_bootstrap_module(_bootstrap)
+    _bootstrap._bootstrap_external = _bootstrap_external
+else:
+    _bootstrap_external.__name__ = 'importlib._bootstrap_external'
+    _bootstrap_external.__package__ = 'importlib'
+    try:
+        _bootstrap_external.__file__ = __file__.replace('__init__.py', '_bootstrap_external.py')
+    except NameError:
+        # __file__ is not guaranteed to be defined, e.g. if this code gets
+        # frozen by a tool like cx_Freeze.
+        pass
+    sys.modules['importlib._bootstrap_external'] = _bootstrap_external
+
+# To simplify imports in test code
+_pack_uint32 = _bootstrap_external._pack_uint32
+_unpack_uint32 = _bootstrap_external._unpack_uint32
+
+# Fully bootstrapped at this point, import whatever you like, circular
+# dependencies and startup overhead minimisation permitting :)
+
+
+# Public API #########################################################
+
+from ._bootstrap import __import__
+
+
+def invalidate_caches():
+    """Call the invalidate_caches() method on all meta path finders stored in
+    sys.meta_path (where implemented)."""
+    for finder in sys.meta_path:
+        if hasattr(finder, 'invalidate_caches'):
+            finder.invalidate_caches()
+
+
+def import_module(name, package=None):
+    """Import a module.
+
+    The 'package' argument is required when performing a relative import. It
+    specifies the package to use as the anchor point from which to resolve the
+    relative import to an absolute import.
+
+    """
+    level = 0
+    if name.startswith('.'):
+        if not package:
+            raise TypeError("the 'package' argument is required to perform a "
+                            f"relative import for {name!r}")
+        for character in name:
+            if character != '.':
+                break
+            level += 1
+    return _bootstrap._gcd_import(name[level:], package, level)
+
+
+_RELOADING = {}
+
+
+def reload(module):
+    """Reload the module and return it.
+
+    The module must have been successfully imported before.
+
+    """
+    try:
+        name = module.__spec__.name
+    except AttributeError:
+        try:
+            name = module.__name__
+        except AttributeError:
+            raise TypeError("reload() argument must be a module") from None
+
+    if sys.modules.get(name) is not module:
+        raise ImportError(f"module {name} not in sys.modules", name=name)
+    if name in _RELOADING:
+        return _RELOADING[name]
+    _RELOADING[name] = module
+    try:
+        parent_name = name.rpartition('.')[0]
+        if parent_name:
+            try:
+                parent = sys.modules[parent_name]
+            except KeyError:
+                raise ImportError(f"parent {parent_name!r} not in sys.modules",
+                                  name=parent_name) from None
+            else:
+                pkgpath = parent.__path__
+        else:
+            pkgpath = None
+        target = module
+        spec = module.__spec__ = _bootstrap._find_spec(name, pkgpath, target)
+        if spec is None:
+            raise ModuleNotFoundError(f"spec not found for the module {name!r}", name=name)
+        _bootstrap._exec(spec, module)
+        # The module may have replaced itself in sys.modules!
+        return sys.modules[name]
+    finally:
+        try:
+            del _RELOADING[name]
+        except KeyError:
+            pass
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_abc.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_abc.py
new file mode 100644
index 0000000000000000000000000000000000000000..693b466112638f52c8b8822daf1973dd288209c2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_abc.py
@@ -0,0 +1,39 @@
+"""Subset of importlib.abc used to reduce importlib.util imports."""
+from . import _bootstrap
+import abc
+
+
+class Loader(metaclass=abc.ABCMeta):
+
+    """Abstract base class for import loaders."""
+
+    def create_module(self, spec):
+        """Return a module to initialize and into which to load.
+
+        This method should raise ImportError if anything prevents it
+        from creating a new module.  It may return None to indicate
+        that the spec should create the new module.
+        """
+        # By default, defer to default semantics for the new module.
+        return None
+
+    # We don't define exec_module() here since that would break
+    # hasattr checks we do to support backward compatibility.
+
+    def load_module(self, fullname):
+        """Return the loaded module.
+
+        The module must be added to sys.modules and have import-related
+        attributes set properly.  The fullname is a str.
+
+        ImportError is raised on failure.
+
+        This method is deprecated in favor of loader.exec_module(). If
+        exec_module() exists then it is used to provide a backwards-compatible
+        functionality for this method.
+
+        """
+        if not hasattr(self, 'exec_module'):
+            raise ImportError
+        # Warning implemented in _load_module_shim().
+        return _bootstrap._load_module_shim(self, fullname)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap.py
new file mode 100644
index 0000000000000000000000000000000000000000..9d911e1dcaba61d4846c151317801f5719a6f4cd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap.py
@@ -0,0 +1,1570 @@
+"""Core implementation of import.
+
+This module is NOT meant to be directly imported! It has been designed such
+that it can be bootstrapped into Python as the implementation of import. As
+such it requires the injection of specific modules and attributes in order to
+work. One should use importlib as the public-facing version of this module.
+
+"""
+#
+# IMPORTANT: Whenever making changes to this module, be sure to run a top-level
+# `make regen-importlib` followed by `make` in order to get the frozen version
+# of the module updated. Not doing so will result in the Makefile to fail for
+# all others who don't have a ./python around to freeze the module
+# in the early stages of compilation.
+#
+
+# See importlib._setup() for what is injected into the global namespace.
+
+# When editing this code be aware that code executed at import time CANNOT
+# reference any injected objects! This includes not only global code but also
+# anything specified at the class level.
+
+def _object_name(obj):
+    try:
+        return obj.__qualname__
+    except AttributeError:
+        return type(obj).__qualname__
+
+# Bootstrap-related code ######################################################
+
+# Modules injected manually by _setup()
+_thread = None
+_warnings = None
+_weakref = None
+
+# Import done by _install_external_importers()
+_bootstrap_external = None
+
+
+def _wrap(new, old):
+    """Simple substitute for functools.update_wrapper."""
+    for replace in ['__module__', '__name__', '__qualname__', '__doc__']:
+        if hasattr(old, replace):
+            setattr(new, replace, getattr(old, replace))
+    new.__dict__.update(old.__dict__)
+
+
+def _new_module(name):
+    return type(sys)(name)
+
+
+# Module-level locking ########################################################
+
+# For a list that can have a weakref to it.
+class _List(list):
+    __slots__ = ("__weakref__",)
+
+
+# Copied from weakref.py with some simplifications and modifications unique to
+# bootstrapping importlib. Many methods were simply deleting for simplicity, so if they
+# are needed in the future they may work if simply copied back in.
+class _WeakValueDictionary:
+
+    def __init__(self):
+        self_weakref = _weakref.ref(self)
+
+        # Inlined to avoid issues with inheriting from _weakref.ref before _weakref is
+        # set by _setup(). Since there's only one instance of this class, this is
+        # not expensive.
+        class KeyedRef(_weakref.ref):
+
+            __slots__ = "key",
+
+            def __new__(type, ob, key):
+                self = super().__new__(type, ob, type.remove)
+                self.key = key
+                return self
+
+            def __init__(self, ob, key):
+                super().__init__(ob, self.remove)
+
+            @staticmethod
+            def remove(wr):
+                nonlocal self_weakref
+
+                self = self_weakref()
+                if self is not None:
+                    if self._iterating:
+                        self._pending_removals.append(wr.key)
+                    else:
+                        _weakref._remove_dead_weakref(self.data, wr.key)
+
+        self._KeyedRef = KeyedRef
+        self.clear()
+
+    def clear(self):
+        self._pending_removals = []
+        self._iterating = set()
+        self.data = {}
+
+    def _commit_removals(self):
+        pop = self._pending_removals.pop
+        d = self.data
+        while True:
+            try:
+                key = pop()
+            except IndexError:
+                return
+            _weakref._remove_dead_weakref(d, key)
+
+    def get(self, key, default=None):
+        if self._pending_removals:
+            self._commit_removals()
+        try:
+            wr = self.data[key]
+        except KeyError:
+            return default
+        else:
+            if (o := wr()) is None:
+                return default
+            else:
+                return o
+
+    def setdefault(self, key, default=None):
+        try:
+            o = self.data[key]()
+        except KeyError:
+            o = None
+        if o is None:
+            if self._pending_removals:
+                self._commit_removals()
+            self.data[key] = self._KeyedRef(default, key)
+            return default
+        else:
+            return o
+
+
+# A dict mapping module names to weakrefs of _ModuleLock instances.
+# Dictionary protected by the global import lock.
+_module_locks = {}
+
+# A dict mapping thread IDs to weakref'ed lists of _ModuleLock instances.
+# This maps a thread to the module locks it is blocking on acquiring.  The
+# values are lists because a single thread could perform a re-entrant import
+# and be "in the process" of blocking on locks for more than one module.  A
+# thread can be "in the process" because a thread cannot actually block on
+# acquiring more than one lock but it can have set up bookkeeping that reflects
+# that it intends to block on acquiring more than one lock.
+#
+# The dictionary uses a WeakValueDictionary to avoid keeping unnecessary
+# lists around, regardless of GC runs. This way there's no memory leak if
+# the list is no longer needed (GH-106176).
+_blocking_on = None
+
+
+class _BlockingOnManager:
+    """A context manager responsible to updating ``_blocking_on``."""
+    def __init__(self, thread_id, lock):
+        self.thread_id = thread_id
+        self.lock = lock
+
+    def __enter__(self):
+        """Mark the running thread as waiting for self.lock. via _blocking_on."""
+        # Interactions with _blocking_on are *not* protected by the global
+        # import lock here because each thread only touches the state that it
+        # owns (state keyed on its thread id).  The global import lock is
+        # re-entrant (i.e., a single thread may take it more than once) so it
+        # wouldn't help us be correct in the face of re-entrancy either.
+
+        self.blocked_on = _blocking_on.setdefault(self.thread_id, _List())
+        self.blocked_on.append(self.lock)
+
+    def __exit__(self, *args, **kwargs):
+        """Remove self.lock from this thread's _blocking_on list."""
+        self.blocked_on.remove(self.lock)
+
+
+class _DeadlockError(RuntimeError):
+    pass
+
+
+
+def _has_deadlocked(target_id, *, seen_ids, candidate_ids, blocking_on):
+    """Check if 'target_id' is holding the same lock as another thread(s).
+
+    The search within 'blocking_on' starts with the threads listed in
+    'candidate_ids'.  'seen_ids' contains any threads that are considered
+    already traversed in the search.
+
+    Keyword arguments:
+    target_id     -- The thread id to try to reach.
+    seen_ids      -- A set of threads that have already been visited.
+    candidate_ids -- The thread ids from which to begin.
+    blocking_on   -- A dict representing the thread/blocking-on graph.  This may
+                     be the same object as the global '_blocking_on' but it is
+                     a parameter to reduce the impact that global mutable
+                     state has on the result of this function.
+    """
+    if target_id in candidate_ids:
+        # If we have already reached the target_id, we're done - signal that it
+        # is reachable.
+        return True
+
+    # Otherwise, try to reach the target_id from each of the given candidate_ids.
+    for tid in candidate_ids:
+        if not (candidate_blocking_on := blocking_on.get(tid)):
+            # There are no edges out from this node, skip it.
+            continue
+        elif tid in seen_ids:
+            # bpo 38091: the chain of tid's we encounter here eventually leads
+            # to a fixed point or a cycle, but does not reach target_id.
+            # This means we would not actually deadlock.  This can happen if
+            # other threads are at the beginning of acquire() below.
+            return False
+        seen_ids.add(tid)
+
+        # Follow the edges out from this thread.
+        edges = [lock.owner for lock in candidate_blocking_on]
+        if _has_deadlocked(target_id, seen_ids=seen_ids, candidate_ids=edges,
+                blocking_on=blocking_on):
+            return True
+
+    return False
+
+
+class _ModuleLock:
+    """A recursive lock implementation which is able to detect deadlocks
+    (e.g. thread 1 trying to take locks A then B, and thread 2 trying to
+    take locks B then A).
+    """
+
+    def __init__(self, name):
+        # Create an RLock for protecting the import process for the
+        # corresponding module.  Since it is an RLock, a single thread will be
+        # able to take it more than once.  This is necessary to support
+        # re-entrancy in the import system that arises from (at least) signal
+        # handlers and the garbage collector.  Consider the case of:
+        #
+        #  import foo
+        #  -> ...
+        #     -> importlib._bootstrap._ModuleLock.acquire
+        #        -> ...
+        #           -> <garbage collector>
+        #              -> __del__
+        #                 -> import foo
+        #                    -> ...
+        #                       -> importlib._bootstrap._ModuleLock.acquire
+        #                          -> _BlockingOnManager.__enter__
+        #
+        # If a different thread than the running one holds the lock then the
+        # thread will have to block on taking the lock, which is what we want
+        # for thread safety.
+        self.lock = _thread.RLock()
+        self.wakeup = _thread.allocate_lock()
+
+        # The name of the module for which this is a lock.
+        self.name = name
+
+        # Can end up being set to None if this lock is not owned by any thread
+        # or the thread identifier for the owning thread.
+        self.owner = None
+
+        # Represent the number of times the owning thread has acquired this lock
+        # via a list of True.  This supports RLock-like ("re-entrant lock")
+        # behavior, necessary in case a single thread is following a circular
+        # import dependency and needs to take the lock for a single module
+        # more than once.
+        #
+        # Counts are represented as a list of True because list.append(True)
+        # and list.pop() are both atomic and thread-safe in CPython and it's hard
+        # to find another primitive with the same properties.
+        self.count = []
+
+        # This is a count of the number of threads that are blocking on
+        # self.wakeup.acquire() awaiting to get their turn holding this module
+        # lock.  When the module lock is released, if this is greater than
+        # zero, it is decremented and `self.wakeup` is released one time.  The
+        # intent is that this will let one other thread make more progress on
+        # acquiring this module lock.  This repeats until all the threads have
+        # gotten a turn.
+        #
+        # This is incremented in self.acquire() when a thread notices it is
+        # going to have to wait for another thread to finish.
+        #
+        # See the comment above count for explanation of the representation.
+        self.waiters = []
+
+    def has_deadlock(self):
+        # To avoid deadlocks for concurrent or re-entrant circular imports,
+        # look at _blocking_on to see if any threads are blocking
+        # on getting the import lock for any module for which the import lock
+        # is held by this thread.
+        return _has_deadlocked(
+            # Try to find this thread.
+            target_id=_thread.get_ident(),
+            seen_ids=set(),
+            # Start from the thread that holds the import lock for this
+            # module.
+            candidate_ids=[self.owner],
+            # Use the global "blocking on" state.
+            blocking_on=_blocking_on,
+        )
+
+    def acquire(self):
+        """
+        Acquire the module lock.  If a potential deadlock is detected,
+        a _DeadlockError is raised.
+        Otherwise, the lock is always acquired and True is returned.
+        """
+        tid = _thread.get_ident()
+        with _BlockingOnManager(tid, self):
+            while True:
+                # Protect interaction with state on self with a per-module
+                # lock.  This makes it safe for more than one thread to try to
+                # acquire the lock for a single module at the same time.
+                with self.lock:
+                    if self.count == [] or self.owner == tid:
+                        # If the lock for this module is unowned then we can
+                        # take the lock immediately and succeed.  If the lock
+                        # for this module is owned by the running thread then
+                        # we can also allow the acquire to succeed.  This
+                        # supports circular imports (thread T imports module A
+                        # which imports module B which imports module A).
+                        self.owner = tid
+                        self.count.append(True)
+                        return True
+
+                    # At this point we know the lock is held (because count !=
+                    # 0) by another thread (because owner != tid).  We'll have
+                    # to get in line to take the module lock.
+
+                    # But first, check to see if this thread would create a
+                    # deadlock by acquiring this module lock.  If it would
+                    # then just stop with an error.
+                    #
+                    # It's not clear who is expected to handle this error.
+                    # There is one handler in _lock_unlock_module but many
+                    # times this method is called when entering the context
+                    # manager _ModuleLockManager instead - so _DeadlockError
+                    # will just propagate up to application code.
+                    #
+                    # This seems to be more than just a hypothetical -
+                    # https://stackoverflow.com/questions/59509154
+                    # https://github.com/encode/django-rest-framework/issues/7078
+                    if self.has_deadlock():
+                        raise _DeadlockError(f'deadlock detected by {self!r}')
+
+                    # Check to see if we're going to be able to acquire the
+                    # lock.  If we are going to have to wait then increment
+                    # the waiters so `self.release` will know to unblock us
+                    # later on.  We do this part non-blockingly so we don't
+                    # get stuck here before we increment waiters.  We have
+                    # this extra acquire call (in addition to the one below,
+                    # outside the self.lock context manager) to make sure
+                    # self.wakeup is held when the next acquire is called (so
+                    # we block).  This is probably needlessly complex and we
+                    # should just take self.wakeup in the return codepath
+                    # above.
+                    if self.wakeup.acquire(False):
+                        self.waiters.append(None)
+
+                # Now take the lock in a blocking fashion.  This won't
+                # complete until the thread holding this lock
+                # (self.owner) calls self.release.
+                self.wakeup.acquire()
+
+                # Taking the lock has served its purpose (making us wait), so we can
+                # give it up now.  We'll take it w/o blocking again on the
+                # next iteration around this 'while' loop.
+                self.wakeup.release()
+
+    def release(self):
+        tid = _thread.get_ident()
+        with self.lock:
+            if self.owner != tid:
+                raise RuntimeError('cannot release un-acquired lock')
+            assert len(self.count) > 0
+            self.count.pop()
+            if not len(self.count):
+                self.owner = None
+                if len(self.waiters) > 0:
+                    self.waiters.pop()
+                    self.wakeup.release()
+
+    def locked(self):
+        return bool(self.count)
+
+    def __repr__(self):
+        return f'_ModuleLock({self.name!r}) at {id(self)}'
+
+
+class _DummyModuleLock:
+    """A simple _ModuleLock equivalent for Python builds without
+    multi-threading support."""
+
+    def __init__(self, name):
+        self.name = name
+        self.count = 0
+
+    def acquire(self):
+        self.count += 1
+        return True
+
+    def release(self):
+        if self.count == 0:
+            raise RuntimeError('cannot release un-acquired lock')
+        self.count -= 1
+
+    def __repr__(self):
+        return f'_DummyModuleLock({self.name!r}) at {id(self)}'
+
+
+class _ModuleLockManager:
+
+    def __init__(self, name):
+        self._name = name
+        self._lock = None
+
+    def __enter__(self):
+        self._lock = _get_module_lock(self._name)
+        self._lock.acquire()
+
+    def __exit__(self, *args, **kwargs):
+        self._lock.release()
+
+
+# The following two functions are for consumption by Python/import.c.
+
+def _get_module_lock(name):
+    """Get or create the module lock for a given module name.
+
+    Acquire/release internally the global import lock to protect
+    _module_locks."""
+
+    _imp.acquire_lock()
+    try:
+        try:
+            lock = _module_locks[name]()
+        except KeyError:
+            lock = None
+
+        if lock is None:
+            if _thread is None:
+                lock = _DummyModuleLock(name)
+            else:
+                lock = _ModuleLock(name)
+
+            def cb(ref, name=name):
+                _imp.acquire_lock()
+                try:
+                    # bpo-31070: Check if another thread created a new lock
+                    # after the previous lock was destroyed
+                    # but before the weakref callback was called.
+                    if _module_locks.get(name) is ref:
+                        del _module_locks[name]
+                finally:
+                    _imp.release_lock()
+
+            _module_locks[name] = _weakref.ref(lock, cb)
+    finally:
+        _imp.release_lock()
+
+    return lock
+
+
+def _lock_unlock_module(name):
+    """Acquires then releases the module lock for a given module name.
+
+    This is used to ensure a module is completely initialized, in the
+    event it is being imported by another thread.
+    """
+    lock = _get_module_lock(name)
+    try:
+        lock.acquire()
+    except _DeadlockError:
+        # Concurrent circular import, we'll accept a partially initialized
+        # module object.
+        pass
+    else:
+        lock.release()
+
+# Frame stripping magic ###############################################
+def _call_with_frames_removed(f, *args, **kwds):
+    """remove_importlib_frames in import.c will always remove sequences
+    of importlib frames that end with a call to this function
+
+    Use it instead of a normal call in places where including the importlib
+    frames introduces unwanted noise into the traceback (e.g. when executing
+    module code)
+    """
+    return f(*args, **kwds)
+
+
+def _verbose_message(message, *args, verbosity=1):
+    """Print the message to stderr if -v/PYTHONVERBOSE is turned on."""
+    if sys.flags.verbose >= verbosity:
+        if not message.startswith(('#', 'import ')):
+            message = '# ' + message
+        print(message.format(*args), file=sys.stderr)
+
+
+def _requires_builtin(fxn):
+    """Decorator to verify the named module is built-in."""
+    def _requires_builtin_wrapper(self, fullname):
+        if fullname not in sys.builtin_module_names:
+            raise ImportError(f'{fullname!r} is not a built-in module',
+                              name=fullname)
+        return fxn(self, fullname)
+    _wrap(_requires_builtin_wrapper, fxn)
+    return _requires_builtin_wrapper
+
+
+def _requires_frozen(fxn):
+    """Decorator to verify the named module is frozen."""
+    def _requires_frozen_wrapper(self, fullname):
+        if not _imp.is_frozen(fullname):
+            raise ImportError(f'{fullname!r} is not a frozen module',
+                              name=fullname)
+        return fxn(self, fullname)
+    _wrap(_requires_frozen_wrapper, fxn)
+    return _requires_frozen_wrapper
+
+
+# Typically used by loader classes as a method replacement.
+def _load_module_shim(self, fullname):
+    """Load the specified module into sys.modules and return it.
+
+    This method is deprecated.  Use loader.exec_module() instead.
+
+    """
+    msg = ("the load_module() method is deprecated and slated for removal in "
+           "Python 3.15; use exec_module() instead")
+    _warnings.warn(msg, DeprecationWarning)
+    spec = spec_from_loader(fullname, self)
+    if fullname in sys.modules:
+        module = sys.modules[fullname]
+        _exec(spec, module)
+        return sys.modules[fullname]
+    else:
+        return _load(spec)
+
+# Module specifications #######################################################
+
+def _module_repr(module):
+    """The implementation of ModuleType.__repr__()."""
+    loader = getattr(module, '__loader__', None)
+    if spec := getattr(module, "__spec__", None):
+        return _module_repr_from_spec(spec)
+    # Fall through to a catch-all which always succeeds.
+    try:
+        name = module.__name__
+    except AttributeError:
+        name = '?'
+    try:
+        filename = module.__file__
+    except AttributeError:
+        if loader is None:
+            return f'<module {name!r}>'
+        else:
+            return f'<module {name!r} ({loader!r})>'
+    else:
+        return f'<module {name!r} from {filename!r}>'
+
+
+class ModuleSpec:
+    """The specification for a module, used for loading.
+
+    A module's spec is the source for information about the module.  For
+    data associated with the module, including source, use the spec's
+    loader.
+
+    `name` is the absolute name of the module.  `loader` is the loader
+    to use when loading the module.  `parent` is the name of the
+    package the module is in.  The parent is derived from the name.
+
+    `is_package` determines if the module is considered a package or
+    not.  On modules this is reflected by the `__path__` attribute.
+
+    `origin` is the specific location used by the loader from which to
+    load the module, if that information is available.  When filename is
+    set, origin will match.
+
+    `has_location` indicates that a spec's "origin" reflects a location.
+    When this is True, `__file__` attribute of the module is set.
+
+    `cached` is the location of the cached bytecode file, if any.  It
+    corresponds to the `__cached__` attribute.
+
+    `submodule_search_locations` is the sequence of path entries to
+    search when importing submodules.  If set, is_package should be
+    True--and False otherwise.
+
+    Packages are simply modules that (may) have submodules.  If a spec
+    has a non-None value in `submodule_search_locations`, the import
+    system will consider modules loaded from the spec as packages.
+
+    Only finders (see importlib.abc.MetaPathFinder and
+    importlib.abc.PathEntryFinder) should modify ModuleSpec instances.
+
+    """
+
+    def __init__(self, name, loader, *, origin=None, loader_state=None,
+                 is_package=None):
+        self.name = name
+        self.loader = loader
+        self.origin = origin
+        self.loader_state = loader_state
+        self.submodule_search_locations = [] if is_package else None
+        self._uninitialized_submodules = []
+
+        # file-location attributes
+        self._set_fileattr = False
+        self._cached = None
+
+    def __repr__(self):
+        args = [f'name={self.name!r}', f'loader={self.loader!r}']
+        if self.origin is not None:
+            args.append(f'origin={self.origin!r}')
+        if self.submodule_search_locations is not None:
+            args.append(f'submodule_search_locations={self.submodule_search_locations}')
+        return f'{self.__class__.__name__}({", ".join(args)})'
+
+    def __eq__(self, other):
+        smsl = self.submodule_search_locations
+        try:
+            return (self.name == other.name and
+                    self.loader == other.loader and
+                    self.origin == other.origin and
+                    smsl == other.submodule_search_locations and
+                    self.cached == other.cached and
+                    self.has_location == other.has_location)
+        except AttributeError:
+            return NotImplemented
+
+    @property
+    def cached(self):
+        if self._cached is None:
+            if self.origin is not None and self._set_fileattr:
+                if _bootstrap_external is None:
+                    raise NotImplementedError
+                self._cached = _bootstrap_external._get_cached(self.origin)
+        return self._cached
+
+    @cached.setter
+    def cached(self, cached):
+        self._cached = cached
+
+    @property
+    def parent(self):
+        """The name of the module's parent."""
+        if self.submodule_search_locations is None:
+            return self.name.rpartition('.')[0]
+        else:
+            return self.name
+
+    @property
+    def has_location(self):
+        return self._set_fileattr
+
+    @has_location.setter
+    def has_location(self, value):
+        self._set_fileattr = bool(value)
+
+
+def spec_from_loader(name, loader, *, origin=None, is_package=None):
+    """Return a module spec based on various loader methods."""
+    if origin is None:
+        origin = getattr(loader, '_ORIGIN', None)
+
+    if not origin and hasattr(loader, 'get_filename'):
+        if _bootstrap_external is None:
+            raise NotImplementedError
+        spec_from_file_location = _bootstrap_external.spec_from_file_location
+
+        if is_package is None:
+            return spec_from_file_location(name, loader=loader)
+        search = [] if is_package else None
+        return spec_from_file_location(name, loader=loader,
+                                       submodule_search_locations=search)
+
+    if is_package is None:
+        if hasattr(loader, 'is_package'):
+            try:
+                is_package = loader.is_package(name)
+            except ImportError:
+                is_package = None  # aka, undefined
+        else:
+            # the default
+            is_package = False
+
+    return ModuleSpec(name, loader, origin=origin, is_package=is_package)
+
+
+def _spec_from_module(module, loader=None, origin=None):
+    # This function is meant for use in _setup().
+    try:
+        spec = module.__spec__
+    except AttributeError:
+        pass
+    else:
+        if spec is not None:
+            return spec
+
+    name = module.__name__
+    if loader is None:
+        try:
+            loader = module.__loader__
+        except AttributeError:
+            # loader will stay None.
+            pass
+    try:
+        location = module.__file__
+    except AttributeError:
+        location = None
+    if origin is None:
+        if loader is not None:
+            origin = getattr(loader, '_ORIGIN', None)
+        if not origin and location is not None:
+            origin = location
+    try:
+        cached = module.__cached__
+    except AttributeError:
+        cached = None
+    try:
+        submodule_search_locations = list(module.__path__)
+    except AttributeError:
+        submodule_search_locations = None
+
+    spec = ModuleSpec(name, loader, origin=origin)
+    spec._set_fileattr = False if location is None else (origin == location)
+    spec.cached = cached
+    spec.submodule_search_locations = submodule_search_locations
+    return spec
+
+
+def _init_module_attrs(spec, module, *, override=False):
+    # The passed-in module may be not support attribute assignment,
+    # in which case we simply don't set the attributes.
+    # __name__
+    if (override or getattr(module, '__name__', None) is None):
+        try:
+            module.__name__ = spec.name
+        except AttributeError:
+            pass
+    # __loader__
+    if override or getattr(module, '__loader__', None) is None:
+        loader = spec.loader
+        if loader is None:
+            # A backward compatibility hack.
+            if spec.submodule_search_locations is not None:
+                if _bootstrap_external is None:
+                    raise NotImplementedError
+                NamespaceLoader = _bootstrap_external.NamespaceLoader
+
+                loader = NamespaceLoader.__new__(NamespaceLoader)
+                loader._path = spec.submodule_search_locations
+                spec.loader = loader
+                # While the docs say that module.__file__ is not set for
+                # built-in modules, and the code below will avoid setting it if
+                # spec.has_location is false, this is incorrect for namespace
+                # packages.  Namespace packages have no location, but their
+                # __spec__.origin is None, and thus their module.__file__
+                # should also be None for consistency.  While a bit of a hack,
+                # this is the best place to ensure this consistency.
+                #
+                # See # https://docs.python.org/3/library/importlib.html#importlib.abc.Loader.load_module
+                # and bpo-32305
+                module.__file__ = None
+        try:
+            module.__loader__ = loader
+        except AttributeError:
+            pass
+    # __package__
+    if override or getattr(module, '__package__', None) is None:
+        try:
+            module.__package__ = spec.parent
+        except AttributeError:
+            pass
+    # __spec__
+    try:
+        module.__spec__ = spec
+    except AttributeError:
+        pass
+    # __path__
+    if override or getattr(module, '__path__', None) is None:
+        if spec.submodule_search_locations is not None:
+            # XXX We should extend __path__ if it's already a list.
+            try:
+                module.__path__ = spec.submodule_search_locations
+            except AttributeError:
+                pass
+    # __file__/__cached__
+    if spec.has_location:
+        if override or getattr(module, '__file__', None) is None:
+            try:
+                module.__file__ = spec.origin
+            except AttributeError:
+                pass
+
+        if override or getattr(module, '__cached__', None) is None:
+            if spec.cached is not None:
+                try:
+                    module.__cached__ = spec.cached
+                except AttributeError:
+                    pass
+    return module
+
+
+def module_from_spec(spec):
+    """Create a module based on the provided spec."""
+    # Typically loaders will not implement create_module().
+    module = None
+    if hasattr(spec.loader, 'create_module'):
+        # If create_module() returns `None` then it means default
+        # module creation should be used.
+        module = spec.loader.create_module(spec)
+    elif hasattr(spec.loader, 'exec_module'):
+        raise ImportError('loaders that define exec_module() '
+                          'must also define create_module()')
+    if module is None:
+        module = _new_module(spec.name)
+    _init_module_attrs(spec, module)
+    return module
+
+
+def _module_repr_from_spec(spec):
+    """Return the repr to use for the module."""
+    name = '?' if spec.name is None else spec.name
+    if spec.origin is None:
+        loader = spec.loader
+        if loader is None:
+            return f'<module {name!r}>'
+        elif (
+            _bootstrap_external is not None
+            and isinstance(loader, _bootstrap_external.NamespaceLoader)
+        ):
+            return f'<module {name!r} (namespace) from {list(loader._path)}>'
+        else:
+            return f'<module {name!r} ({loader!r})>'
+    else:
+        if spec.has_location:
+            return f'<module {name!r} from {spec.origin!r}>'
+        else:
+            return f'<module {spec.name!r} ({spec.origin})>'
+
+
+# Used by importlib.reload() and _load_module_shim().
+def _exec(spec, module):
+    """Execute the spec's specified module in an existing module's namespace."""
+    name = spec.name
+    with _ModuleLockManager(name):
+        if sys.modules.get(name) is not module:
+            msg = f'module {name!r} not in sys.modules'
+            raise ImportError(msg, name=name)
+        try:
+            if spec.loader is None:
+                if spec.submodule_search_locations is None:
+                    raise ImportError('missing loader', name=spec.name)
+                # Namespace package.
+                _init_module_attrs(spec, module, override=True)
+            else:
+                _init_module_attrs(spec, module, override=True)
+                if not hasattr(spec.loader, 'exec_module'):
+                    msg = (f"{_object_name(spec.loader)}.exec_module() not found; "
+                           "falling back to load_module()")
+                    _warnings.warn(msg, ImportWarning)
+                    spec.loader.load_module(name)
+                else:
+                    spec.loader.exec_module(module)
+        finally:
+            # Update the order of insertion into sys.modules for module
+            # clean-up at shutdown.
+            module = sys.modules.pop(spec.name)
+            sys.modules[spec.name] = module
+    return module
+
+
+def _load_backward_compatible(spec):
+    # It is assumed that all callers have been warned about using load_module()
+    # appropriately before calling this function.
+    try:
+        spec.loader.load_module(spec.name)
+    except:
+        if spec.name in sys.modules:
+            module = sys.modules.pop(spec.name)
+            sys.modules[spec.name] = module
+        raise
+    # The module must be in sys.modules at this point!
+    # Move it to the end of sys.modules.
+    module = sys.modules.pop(spec.name)
+    sys.modules[spec.name] = module
+    if getattr(module, '__loader__', None) is None:
+        try:
+            module.__loader__ = spec.loader
+        except AttributeError:
+            pass
+    if getattr(module, '__package__', None) is None:
+        try:
+            # Since module.__path__ may not line up with
+            # spec.submodule_search_paths, we can't necessarily rely
+            # on spec.parent here.
+            module.__package__ = module.__name__
+            if not hasattr(module, '__path__'):
+                module.__package__ = spec.name.rpartition('.')[0]
+        except AttributeError:
+            pass
+    if getattr(module, '__spec__', None) is None:
+        try:
+            module.__spec__ = spec
+        except AttributeError:
+            pass
+    return module
+
+def _load_unlocked(spec):
+    # A helper for direct use by the import system.
+    if spec.loader is not None:
+        # Not a namespace package.
+        if not hasattr(spec.loader, 'exec_module'):
+            msg = (f"{_object_name(spec.loader)}.exec_module() not found; "
+                    "falling back to load_module()")
+            _warnings.warn(msg, ImportWarning)
+            return _load_backward_compatible(spec)
+
+    module = module_from_spec(spec)
+
+    # This must be done before putting the module in sys.modules
+    # (otherwise an optimization shortcut in import.c becomes
+    # wrong).
+    spec._initializing = True
+    try:
+        sys.modules[spec.name] = module
+        try:
+            if spec.loader is None:
+                if spec.submodule_search_locations is None:
+                    raise ImportError('missing loader', name=spec.name)
+                # A namespace package so do nothing.
+            else:
+                spec.loader.exec_module(module)
+        except:
+            try:
+                del sys.modules[spec.name]
+            except KeyError:
+                pass
+            raise
+        # Move the module to the end of sys.modules.
+        # We don't ensure that the import-related module attributes get
+        # set in the sys.modules replacement case.  Such modules are on
+        # their own.
+        module = sys.modules.pop(spec.name)
+        sys.modules[spec.name] = module
+        _verbose_message('import {!r} # {!r}', spec.name, spec.loader)
+    finally:
+        spec._initializing = False
+
+    return module
+
+# A method used during testing of _load_unlocked() and by
+# _load_module_shim().
+def _load(spec):
+    """Return a new module object, loaded by the spec's loader.
+
+    The module is not added to its parent.
+
+    If a module is already in sys.modules, that existing module gets
+    clobbered.
+
+    """
+    with _ModuleLockManager(spec.name):
+        return _load_unlocked(spec)
+
+
+# Loaders #####################################################################
+
+class BuiltinImporter:
+
+    """Meta path import for built-in modules.
+
+    All methods are either class or static methods to avoid the need to
+    instantiate the class.
+
+    """
+
+    _ORIGIN = "built-in"
+
+    @classmethod
+    def find_spec(cls, fullname, path=None, target=None):
+        if _imp.is_builtin(fullname):
+            return spec_from_loader(fullname, cls, origin=cls._ORIGIN)
+        else:
+            return None
+
+    @staticmethod
+    def create_module(spec):
+        """Create a built-in module"""
+        if spec.name not in sys.builtin_module_names:
+            raise ImportError(f'{spec.name!r} is not a built-in module',
+                              name=spec.name)
+        return _call_with_frames_removed(_imp.create_builtin, spec)
+
+    @staticmethod
+    def exec_module(module):
+        """Exec a built-in module"""
+        _call_with_frames_removed(_imp.exec_builtin, module)
+
+    @classmethod
+    @_requires_builtin
+    def get_code(cls, fullname):
+        """Return None as built-in modules do not have code objects."""
+        return None
+
+    @classmethod
+    @_requires_builtin
+    def get_source(cls, fullname):
+        """Return None as built-in modules do not have source code."""
+        return None
+
+    @classmethod
+    @_requires_builtin
+    def is_package(cls, fullname):
+        """Return False as built-in modules are never packages."""
+        return False
+
+    load_module = classmethod(_load_module_shim)
+
+
+class FrozenImporter:
+
+    """Meta path import for frozen modules.
+
+    All methods are either class or static methods to avoid the need to
+    instantiate the class.
+
+    """
+
+    _ORIGIN = "frozen"
+
+    @classmethod
+    def _fix_up_module(cls, module):
+        spec = module.__spec__
+        state = spec.loader_state
+        if state is None:
+            # The module is missing FrozenImporter-specific values.
+
+            # Fix up the spec attrs.
+            origname = vars(module).pop('__origname__', None)
+            assert origname, 'see PyImport_ImportFrozenModuleObject()'
+            ispkg = hasattr(module, '__path__')
+            assert _imp.is_frozen_package(module.__name__) == ispkg, ispkg
+            filename, pkgdir = cls._resolve_filename(origname, spec.name, ispkg)
+            spec.loader_state = type(sys.implementation)(
+                filename=filename,
+                origname=origname,
+            )
+            __path__ = spec.submodule_search_locations
+            if ispkg:
+                assert __path__ == [], __path__
+                if pkgdir:
+                    spec.submodule_search_locations.insert(0, pkgdir)
+            else:
+                assert __path__ is None, __path__
+
+            # Fix up the module attrs (the bare minimum).
+            assert not hasattr(module, '__file__'), module.__file__
+            if filename:
+                try:
+                    module.__file__ = filename
+                except AttributeError:
+                    pass
+            if ispkg:
+                if module.__path__ != __path__:
+                    assert module.__path__ == [], module.__path__
+                    module.__path__.extend(__path__)
+        else:
+            # These checks ensure that _fix_up_module() is only called
+            # in the right places.
+            __path__ = spec.submodule_search_locations
+            ispkg = __path__ is not None
+            # Check the loader state.
+            assert sorted(vars(state)) == ['filename', 'origname'], state
+            if state.origname:
+                # The only frozen modules with "origname" set are stdlib modules.
+                (__file__, pkgdir,
+                 ) = cls._resolve_filename(state.origname, spec.name, ispkg)
+                assert state.filename == __file__, (state.filename, __file__)
+                if pkgdir:
+                    assert __path__ == [pkgdir], (__path__, pkgdir)
+                else:
+                    assert __path__ == ([] if ispkg else None), __path__
+            else:
+                __file__ = None
+                assert state.filename is None, state.filename
+                assert __path__ == ([] if ispkg else None), __path__
+            # Check the file attrs.
+            if __file__:
+                assert hasattr(module, '__file__')
+                assert module.__file__ == __file__, (module.__file__, __file__)
+            else:
+                assert not hasattr(module, '__file__'), module.__file__
+            if ispkg:
+                assert hasattr(module, '__path__')
+                assert module.__path__ == __path__, (module.__path__, __path__)
+            else:
+                assert not hasattr(module, '__path__'), module.__path__
+        assert not spec.has_location
+
+    @classmethod
+    def _resolve_filename(cls, fullname, alias=None, ispkg=False):
+        if not fullname or not getattr(sys, '_stdlib_dir', None):
+            return None, None
+        try:
+            sep = cls._SEP
+        except AttributeError:
+            sep = cls._SEP = '\\' if sys.platform == 'win32' else '/'
+
+        if fullname != alias:
+            if fullname.startswith('<'):
+                fullname = fullname[1:]
+                if not ispkg:
+                    fullname = f'{fullname}.__init__'
+            else:
+                ispkg = False
+        relfile = fullname.replace('.', sep)
+        if ispkg:
+            pkgdir = f'{sys._stdlib_dir}{sep}{relfile}'
+            filename = f'{pkgdir}{sep}__init__.py'
+        else:
+            pkgdir = None
+            filename = f'{sys._stdlib_dir}{sep}{relfile}.py'
+        return filename, pkgdir
+
+    @classmethod
+    def find_spec(cls, fullname, path=None, target=None):
+        info = _call_with_frames_removed(_imp.find_frozen, fullname)
+        if info is None:
+            return None
+        # We get the marshaled data in exec_module() (the loader
+        # part of the importer), instead of here (the finder part).
+        # The loader is the usual place to get the data that will
+        # be loaded into the module.  (For example, see _LoaderBasics
+        # in _bootstrap_external.py.)  Most importantly, this importer
+        # is simpler if we wait to get the data.
+        # However, getting as much data in the finder as possible
+        # to later load the module is okay, and sometimes important.
+        # (That's why ModuleSpec.loader_state exists.)  This is
+        # especially true if it avoids throwing away expensive data
+        # the loader would otherwise duplicate later and can be done
+        # efficiently.  In this case it isn't worth it.
+        _, ispkg, origname = info
+        spec = spec_from_loader(fullname, cls,
+                                origin=cls._ORIGIN,
+                                is_package=ispkg)
+        filename, pkgdir = cls._resolve_filename(origname, fullname, ispkg)
+        spec.loader_state = type(sys.implementation)(
+            filename=filename,
+            origname=origname,
+        )
+        if pkgdir:
+            spec.submodule_search_locations.insert(0, pkgdir)
+        return spec
+
+    @staticmethod
+    def create_module(spec):
+        """Set __file__, if able."""
+        module = _new_module(spec.name)
+        try:
+            filename = spec.loader_state.filename
+        except AttributeError:
+            pass
+        else:
+            if filename:
+                module.__file__ = filename
+        return module
+
+    @staticmethod
+    def exec_module(module):
+        spec = module.__spec__
+        name = spec.name
+        code = _call_with_frames_removed(_imp.get_frozen_object, name)
+        exec(code, module.__dict__)
+
+    @classmethod
+    def load_module(cls, fullname):
+        """Load a frozen module.
+
+        This method is deprecated.  Use exec_module() instead.
+
+        """
+        # Warning about deprecation implemented in _load_module_shim().
+        module = _load_module_shim(cls, fullname)
+        info = _imp.find_frozen(fullname)
+        assert info is not None
+        _, ispkg, origname = info
+        module.__origname__ = origname
+        vars(module).pop('__file__', None)
+        if ispkg:
+            module.__path__ = []
+        cls._fix_up_module(module)
+        return module
+
+    @classmethod
+    @_requires_frozen
+    def get_code(cls, fullname):
+        """Return the code object for the frozen module."""
+        return _imp.get_frozen_object(fullname)
+
+    @classmethod
+    @_requires_frozen
+    def get_source(cls, fullname):
+        """Return None as frozen modules do not have source code."""
+        return None
+
+    @classmethod
+    @_requires_frozen
+    def is_package(cls, fullname):
+        """Return True if the frozen module is a package."""
+        return _imp.is_frozen_package(fullname)
+
+
+# Import itself ###############################################################
+
+class _ImportLockContext:
+
+    """Context manager for the import lock."""
+
+    def __enter__(self):
+        """Acquire the import lock."""
+        _imp.acquire_lock()
+
+    def __exit__(self, exc_type, exc_value, exc_traceback):
+        """Release the import lock regardless of any raised exceptions."""
+        _imp.release_lock()
+
+
+def _resolve_name(name, package, level):
+    """Resolve a relative module name to an absolute one."""
+    bits = package.rsplit('.', level - 1)
+    if len(bits) < level:
+        raise ImportError('attempted relative import beyond top-level package')
+    base = bits[0]
+    return f'{base}.{name}' if name else base
+
+
+def _find_spec(name, path, target=None):
+    """Find a module's spec."""
+    meta_path = sys.meta_path
+    if meta_path is None:
+        raise ImportError("sys.meta_path is None, Python is likely "
+                          "shutting down")
+
+    # gh-130094: Copy sys.meta_path so that we have a consistent view of the
+    # list while iterating over it.
+    meta_path = list(meta_path)
+    if not meta_path:
+        _warnings.warn('sys.meta_path is empty', ImportWarning)
+
+    # We check sys.modules here for the reload case.  While a passed-in
+    # target will usually indicate a reload there is no guarantee, whereas
+    # sys.modules provides one.
+    is_reload = name in sys.modules
+    for finder in meta_path:
+        with _ImportLockContext():
+            try:
+                find_spec = finder.find_spec
+            except AttributeError:
+                continue
+            else:
+                spec = find_spec(name, path, target)
+        if spec is not None:
+            # The parent import may have already imported this module.
+            if not is_reload and name in sys.modules:
+                module = sys.modules[name]
+                try:
+                    __spec__ = module.__spec__
+                except AttributeError:
+                    # We use the found spec since that is the one that
+                    # we would have used if the parent module hadn't
+                    # beaten us to the punch.
+                    return spec
+                else:
+                    if __spec__ is None:
+                        return spec
+                    else:
+                        return __spec__
+            else:
+                return spec
+    else:
+        return None
+
+
+def _sanity_check(name, package, level):
+    """Verify arguments are "sane"."""
+    if not isinstance(name, str):
+        raise TypeError(f'module name must be str, not {type(name)}')
+    if level < 0:
+        raise ValueError('level must be >= 0')
+    if level > 0:
+        if not isinstance(package, str):
+            raise TypeError('__package__ not set to a string')
+        elif not package:
+            raise ImportError('attempted relative import with no known parent '
+                              'package')
+    if not name and level == 0:
+        raise ValueError('Empty module name')
+
+
+_ERR_MSG_PREFIX = 'No module named '
+
+def _find_and_load_unlocked(name, import_):
+    path = None
+    parent = name.rpartition('.')[0]
+    parent_spec = None
+    if parent:
+        if parent not in sys.modules:
+            _call_with_frames_removed(import_, parent)
+        # Crazy side-effects!
+        module = sys.modules.get(name)
+        if module is not None:
+            return module
+        parent_module = sys.modules[parent]
+        try:
+            path = parent_module.__path__
+        except AttributeError:
+            msg = f'{_ERR_MSG_PREFIX}{name!r}; {parent!r} is not a package'
+            raise ModuleNotFoundError(msg, name=name) from None
+        parent_spec = parent_module.__spec__
+        if getattr(parent_spec, '_initializing', False):
+            _call_with_frames_removed(import_, parent)
+        # Crazy side-effects (again)!
+        module = sys.modules.get(name)
+        if module is not None:
+            return module
+        child = name.rpartition('.')[2]
+    spec = _find_spec(name, path)
+    if spec is None:
+        raise ModuleNotFoundError(f'{_ERR_MSG_PREFIX}{name!r}', name=name)
+    else:
+        if parent_spec:
+            # Temporarily add child we are currently importing to parent's
+            # _uninitialized_submodules for circular import tracking.
+            parent_spec._uninitialized_submodules.append(child)
+        try:
+            module = _load_unlocked(spec)
+        finally:
+            if parent_spec:
+                parent_spec._uninitialized_submodules.pop()
+    if parent:
+        # Set the module as an attribute on its parent.
+        parent_module = sys.modules[parent]
+        try:
+            setattr(parent_module, child, module)
+        except AttributeError:
+            msg = f"Cannot set an attribute on {parent!r} for child module {child!r}"
+            _warnings.warn(msg, ImportWarning)
+    return module
+
+
+_NEEDS_LOADING = object()
+
+
+def _find_and_load(name, import_):
+    """Find and load the module."""
+
+    # Optimization: we avoid unneeded module locking if the module
+    # already exists in sys.modules and is fully initialized.
+    module = sys.modules.get(name, _NEEDS_LOADING)
+    if (module is _NEEDS_LOADING or
+        getattr(getattr(module, "__spec__", None), "_initializing", False)):
+        with _ModuleLockManager(name):
+            module = sys.modules.get(name, _NEEDS_LOADING)
+            if module is _NEEDS_LOADING:
+                return _find_and_load_unlocked(name, import_)
+
+        # Optimization: only call _bootstrap._lock_unlock_module() if
+        # module.__spec__._initializing is True.
+        # NOTE: because of this, initializing must be set *before*
+        # putting the new module in sys.modules.
+        _lock_unlock_module(name)
+    else:
+        # Verify the module is still in sys.modules. Another thread may have
+        # removed it (due to import failure) between our sys.modules.get()
+        # above and the _initializing check. If removed, we retry the import
+        # to preserve normal semantics: the caller gets the exception from
+        # the actual import failure rather than a synthetic error.
+        if sys.modules.get(name) is not module:
+            return _find_and_load(name, import_)
+
+    if module is None:
+        message = f'import of {name} halted; None in sys.modules'
+        raise ModuleNotFoundError(message, name=name)
+
+    return module
+
+
+def _gcd_import(name, package=None, level=0):
+    """Import and return the module based on its name, the package the call is
+    being made from, and the level adjustment.
+
+    This function represents the greatest common denominator of functionality
+    between import_module and __import__. This includes setting __package__ if
+    the loader did not.
+
+    """
+    _sanity_check(name, package, level)
+    if level > 0:
+        name = _resolve_name(name, package, level)
+    return _find_and_load(name, _gcd_import)
+
+
+def _handle_fromlist(module, fromlist, import_, *, recursive=False):
+    """Figure out what __import__ should return.
+
+    The import_ parameter is a callable which takes the name of module to
+    import. It is required to decouple the function from assuming importlib's
+    import implementation is desired.
+
+    """
+    # The hell that is fromlist ...
+    # If a package was imported, try to import stuff from fromlist.
+    for x in fromlist:
+        if not isinstance(x, str):
+            if recursive:
+                where = module.__name__ + '.__all__'
+            else:
+                where = "``from list''"
+            raise TypeError(f"Item in {where} must be str, "
+                            f"not {type(x).__name__}")
+        elif x == '*':
+            if not recursive and hasattr(module, '__all__'):
+                _handle_fromlist(module, module.__all__, import_,
+                                 recursive=True)
+        elif not hasattr(module, x):
+            from_name = f'{module.__name__}.{x}'
+            try:
+                _call_with_frames_removed(import_, from_name)
+            except ModuleNotFoundError as exc:
+                # Backwards-compatibility dictates we ignore failed
+                # imports triggered by fromlist for modules that don't
+                # exist.
+                if (exc.name == from_name and
+                    sys.modules.get(from_name, _NEEDS_LOADING) is not None):
+                    continue
+                raise
+    return module
+
+
+def _calc___package__(globals):
+    """Calculate what __package__ should be.
+
+    __package__ is not guaranteed to be defined or could be set to None
+    to represent that its proper value is unknown.
+
+    """
+    package = globals.get('__package__')
+    spec = globals.get('__spec__')
+    if package is not None:
+        if spec is not None and package != spec.parent:
+            _warnings.warn("__package__ != __spec__.parent "
+                           f"({package!r} != {spec.parent!r})",
+                           DeprecationWarning, stacklevel=3)
+        return package
+    elif spec is not None:
+        return spec.parent
+    else:
+        _warnings.warn("can't resolve package from __spec__ or __package__, "
+                       "falling back on __name__ and __path__",
+                       ImportWarning, stacklevel=3)
+        package = globals['__name__']
+        if '__path__' not in globals:
+            package = package.rpartition('.')[0]
+    return package
+
+
+def __import__(name, globals=None, locals=None, fromlist=(), level=0):
+    """Import a module.
+
+    The 'globals' argument is used to infer where the import is occurring from
+    to handle relative imports. The 'locals' argument is ignored. The
+    'fromlist' argument specifies what should exist as attributes on the module
+    being imported (e.g. ``from module import <fromlist>``).  The 'level'
+    argument represents the package location to import from in a relative
+    import (e.g. ``from ..pkg import mod`` would have a 'level' of 2).
+
+    """
+    if level == 0:
+        module = _gcd_import(name)
+    else:
+        globals_ = globals if globals is not None else {}
+        package = _calc___package__(globals_)
+        module = _gcd_import(name, package, level)
+    if not fromlist:
+        # Return up to the first dot in 'name'. This is complicated by the fact
+        # that 'name' may be relative.
+        if level == 0:
+            return _gcd_import(name.partition('.')[0])
+        elif not name:
+            return module
+        else:
+            # Figure out where to slice the module's name up to the first dot
+            # in 'name'.
+            cut_off = len(name) - len(name.partition('.')[0])
+            # Slice end needs to be positive to alleviate need to special-case
+            # when ``'.' not in name``.
+            return sys.modules[module.__name__[:len(module.__name__)-cut_off]]
+    elif hasattr(module, '__path__'):
+        return _handle_fromlist(module, fromlist, _gcd_import)
+    else:
+        return module
+
+
+def _builtin_from_name(name):
+    spec = BuiltinImporter.find_spec(name)
+    if spec is None:
+        raise ImportError('no built-in module named ' + name)
+    return _load_unlocked(spec)
+
+
+def _setup(sys_module, _imp_module):
+    """Setup importlib by importing needed built-in modules and injecting them
+    into the global namespace.
+
+    As sys is needed for sys.modules access and _imp is needed to load built-in
+    modules, those two modules must be explicitly passed in.
+
+    """
+    global _imp, sys, _blocking_on
+    _imp = _imp_module
+    sys = sys_module
+
+    # Set up the spec for existing builtin/frozen modules.
+    module_type = type(sys)
+    for name, module in sys.modules.items():
+        if isinstance(module, module_type):
+            if name in sys.builtin_module_names:
+                loader = BuiltinImporter
+            elif _imp.is_frozen(name):
+                loader = FrozenImporter
+            else:
+                continue
+            spec = _spec_from_module(module, loader)
+            _init_module_attrs(spec, module)
+            if loader is FrozenImporter:
+                loader._fix_up_module(module)
+
+    # Directly load built-in modules needed during bootstrap.
+    self_module = sys.modules[__name__]
+    for builtin_name in ('_thread', '_warnings', '_weakref'):
+        if builtin_name not in sys.modules:
+            builtin_module = _builtin_from_name(builtin_name)
+        else:
+            builtin_module = sys.modules[builtin_name]
+        setattr(self_module, builtin_name, builtin_module)
+
+    # Instantiation requires _weakref to have been set.
+    _blocking_on = _WeakValueDictionary()
+
+
+def _install(sys_module, _imp_module):
+    """Install importers for builtin and frozen modules"""
+    _setup(sys_module, _imp_module)
+
+    sys.meta_path.append(BuiltinImporter)
+    sys.meta_path.append(FrozenImporter)
+
+
+def _install_external_importers():
+    """Install importers that require external filesystem access"""
+    global _bootstrap_external
+    import _frozen_importlib_external
+    _bootstrap_external = _frozen_importlib_external
+    _frozen_importlib_external._install(sys.modules[__name__])
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap_external.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap_external.py
new file mode 100644
index 0000000000000000000000000000000000000000..6a828ae75ed34c1fb2148563d4e245dac212a3ca
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/_bootstrap_external.py
@@ -0,0 +1,1562 @@
+"""Core implementation of path-based import.
+
+This module is NOT meant to be directly imported! It has been designed such
+that it can be bootstrapped into Python as the implementation of import. As
+such it requires the injection of specific modules and attributes in order to
+work. One should use importlib as the public-facing version of this module.
+
+"""
+# IMPORTANT: Whenever making changes to this module, be sure to run a top-level
+# `make regen-importlib` followed by `make` in order to get the frozen version
+# of the module updated. Not doing so will result in the Makefile to fail for
+# all others who don't have a ./python around to freeze the module in the early
+# stages of compilation.
+#
+
+# See importlib._setup() for what is injected into the global namespace.
+
+# When editing this code be aware that code executed at import time CANNOT
+# reference any injected objects! This includes not only global code but also
+# anything specified at the class level.
+
+# Module injected manually by _set_bootstrap_module()
+_bootstrap = None
+
+# Import builtin modules
+import _imp
+import _io
+import sys
+import _warnings
+import marshal
+
+
+_MS_WINDOWS = (sys.platform == 'win32')
+if _MS_WINDOWS:
+    import nt as _os
+    import winreg
+else:
+    import posix as _os
+
+
+if _MS_WINDOWS:
+    path_separators = ['\\', '/']
+else:
+    path_separators = ['/']
+# Assumption made in _path_join()
+assert all(len(sep) == 1 for sep in path_separators)
+path_sep = path_separators[0]
+path_sep_tuple = tuple(path_separators)
+path_separators = ''.join(path_separators)
+_pathseps_with_colon = {f':{s}' for s in path_separators}
+
+
+# Bootstrap-related code ######################################################
+_CASE_INSENSITIVE_PLATFORMS_STR_KEY = 'win',
+_CASE_INSENSITIVE_PLATFORMS_BYTES_KEY = 'cygwin', 'darwin', 'ios', 'tvos', 'watchos'
+_CASE_INSENSITIVE_PLATFORMS =  (_CASE_INSENSITIVE_PLATFORMS_BYTES_KEY
+                                + _CASE_INSENSITIVE_PLATFORMS_STR_KEY)
+
+
+def _make_relax_case():
+    if sys.platform.startswith(_CASE_INSENSITIVE_PLATFORMS):
+        if sys.platform.startswith(_CASE_INSENSITIVE_PLATFORMS_STR_KEY):
+            key = 'PYTHONCASEOK'
+        else:
+            key = b'PYTHONCASEOK'
+
+        def _relax_case():
+            """True if filenames must be checked case-insensitively and ignore environment flags are not set."""
+            return not sys.flags.ignore_environment and key in _os.environ
+    else:
+        def _relax_case():
+            """True if filenames must be checked case-insensitively."""
+            return False
+    return _relax_case
+
+_relax_case = _make_relax_case()
+
+
+def _pack_uint32(x):
+    """Convert a 32-bit integer to little-endian."""
+    return (int(x) & 0xFFFFFFFF).to_bytes(4, 'little')
+
+
+def _unpack_uint64(data):
+    """Convert 8 bytes in little-endian to an integer."""
+    assert len(data) == 8
+    return int.from_bytes(data, 'little')
+
+def _unpack_uint32(data):
+    """Convert 4 bytes in little-endian to an integer."""
+    assert len(data) == 4
+    return int.from_bytes(data, 'little')
+
+def _unpack_uint16(data):
+    """Convert 2 bytes in little-endian to an integer."""
+    assert len(data) == 2
+    return int.from_bytes(data, 'little')
+
+
+if _MS_WINDOWS:
+    def _path_join(*path_parts):
+        """Replacement for os.path.join()."""
+        if not path_parts:
+            return ""
+        if len(path_parts) == 1:
+            return path_parts[0]
+        root = ""
+        path = []
+        for new_root, tail in map(_os._path_splitroot, path_parts):
+            if new_root.startswith(path_sep_tuple) or new_root.endswith(path_sep_tuple):
+                root = new_root.rstrip(path_separators) or root
+                path = [path_sep + tail]
+            elif new_root.endswith(':'):
+                if root.casefold() != new_root.casefold():
+                    # Drive relative paths have to be resolved by the OS, so we reset the
+                    # tail but do not add a path_sep prefix.
+                    root = new_root
+                    path = [tail]
+                else:
+                    path.append(tail)
+            else:
+                root = new_root or root
+                path.append(tail)
+        path = [p.rstrip(path_separators) for p in path if p]
+        if len(path) == 1 and not path[0]:
+            # Avoid losing the root's trailing separator when joining with nothing
+            return root + path_sep
+        return root + path_sep.join(path)
+
+else:
+    def _path_join(*path_parts):
+        """Replacement for os.path.join()."""
+        return path_sep.join([part.rstrip(path_separators)
+                              for part in path_parts if part])
+
+
+def _path_split(path):
+    """Replacement for os.path.split()."""
+    i = max(path.rfind(p) for p in path_separators)
+    if i < 0:
+        return '', path
+    return path[:i], path[i + 1:]
+
+
+def _path_stat(path):
+    """Stat the path.
+
+    Made a separate function to make it easier to override in experiments
+    (e.g. cache stat results).
+
+    """
+    return _os.stat(path)
+
+
+def _path_is_mode_type(path, mode):
+    """Test whether the path is the specified mode type."""
+    try:
+        stat_info = _path_stat(path)
+    except OSError:
+        return False
+    return (stat_info.st_mode & 0o170000) == mode
+
+
+def _path_isfile(path):
+    """Replacement for os.path.isfile."""
+    return _path_is_mode_type(path, 0o100000)
+
+
+def _path_isdir(path):
+    """Replacement for os.path.isdir."""
+    if not path:
+        path = _os.getcwd()
+    return _path_is_mode_type(path, 0o040000)
+
+
+if _MS_WINDOWS:
+    def _path_isabs(path):
+        """Replacement for os.path.isabs."""
+        if not path:
+            return False
+        root = _os._path_splitroot(path)[0].replace('/', '\\')
+        return len(root) > 1 and (root.startswith('\\\\') or root.endswith('\\'))
+
+else:
+    def _path_isabs(path):
+        """Replacement for os.path.isabs."""
+        return path.startswith(path_separators)
+
+
+def _path_abspath(path):
+    """Replacement for os.path.abspath."""
+    if not _path_isabs(path):
+        for sep in path_separators:
+            path = path.removeprefix(f".{sep}")
+        return _path_join(_os.getcwd(), path)
+    else:
+        return path
+
+
+def _write_atomic(path, data, mode=0o666):
+    """Best-effort function to write data to a path atomically.
+    Be prepared to handle a FileExistsError if concurrent writing of the
+    temporary file is attempted."""
+    # id() is used to generate a pseudo-random filename.
+    path_tmp = f'{path}.{id(path)}'
+    fd = _os.open(path_tmp,
+                  _os.O_EXCL | _os.O_CREAT | _os.O_WRONLY, mode & 0o666)
+    try:
+        # We first write data to a temporary file, and then use os.replace() to
+        # perform an atomic rename.
+        with _io.open(fd, 'wb') as file:
+            file.write(data)
+        _os.replace(path_tmp, path)
+    except OSError:
+        try:
+            _os.unlink(path_tmp)
+        except OSError:
+            pass
+        raise
+
+
+_code_type = type(_write_atomic.__code__)
+
+MAGIC_NUMBER = _imp.pyc_magic_number_token.to_bytes(4, 'little')
+
+_PYCACHE = '__pycache__'
+_OPT = 'opt-'
+
+SOURCE_SUFFIXES = ['.py']
+if _MS_WINDOWS:
+    SOURCE_SUFFIXES.append('.pyw')
+
+EXTENSION_SUFFIXES = _imp.extension_suffixes()
+
+BYTECODE_SUFFIXES = ['.pyc']
+# Deprecated.
+DEBUG_BYTECODE_SUFFIXES = OPTIMIZED_BYTECODE_SUFFIXES = BYTECODE_SUFFIXES
+
+def cache_from_source(path, debug_override=None, *, optimization=None):
+    """Given the path to a .py file, return the path to its .pyc file.
+
+    The .py file does not need to exist; this simply returns the path to the
+    .pyc file calculated as if the .py file were imported.
+
+    The 'optimization' parameter controls the presumed optimization level of
+    the bytecode file. If 'optimization' is not None, the string representation
+    of the argument is taken and verified to be alphanumeric (else ValueError
+    is raised).
+
+    The debug_override parameter is deprecated. If debug_override is not None,
+    a True value is the same as setting 'optimization' to the empty string
+    while a False value is equivalent to setting 'optimization' to '1'.
+
+    If sys.implementation.cache_tag is None then NotImplementedError is raised.
+
+    """
+    if debug_override is not None:
+        _warnings.warn('the debug_override parameter is deprecated; use '
+                       "'optimization' instead", DeprecationWarning)
+        if optimization is not None:
+            message = 'debug_override or optimization must be set to None'
+            raise TypeError(message)
+        optimization = '' if debug_override else 1
+    path = _os.fspath(path)
+    head, tail = _path_split(path)
+    base, sep, rest = tail.rpartition('.')
+    tag = sys.implementation.cache_tag
+    if tag is None:
+        raise NotImplementedError('sys.implementation.cache_tag is None')
+    almost_filename = ''.join([(base if base else rest), sep, tag])
+    if optimization is None:
+        if sys.flags.optimize == 0:
+            optimization = ''
+        else:
+            optimization = sys.flags.optimize
+    optimization = str(optimization)
+    if optimization != '':
+        if not optimization.isalnum():
+            raise ValueError(f'{optimization!r} is not alphanumeric')
+        almost_filename = f'{almost_filename}.{_OPT}{optimization}'
+    filename = almost_filename + BYTECODE_SUFFIXES[0]
+    if sys.pycache_prefix is not None:
+        # We need an absolute path to the py file to avoid the possibility of
+        # collisions within sys.pycache_prefix, if someone has two different
+        # `foo/bar.py` on their system and they import both of them using the
+        # same sys.pycache_prefix. Let's say sys.pycache_prefix is
+        # `C:\Bytecode`; the idea here is that if we get `Foo\Bar`, we first
+        # make it absolute (`C:\Somewhere\Foo\Bar`), then make it root-relative
+        # (`Somewhere\Foo\Bar`), so we end up placing the bytecode file in an
+        # unambiguous `C:\Bytecode\Somewhere\Foo\Bar\`.
+        head = _path_abspath(head)
+
+        # Strip initial drive from a Windows path. We know we have an absolute
+        # path here, so the second part of the check rules out a POSIX path that
+        # happens to contain a colon at the second character.
+        # Slicing avoids issues with an empty (or short) `head`.
+        if head[1:2] == ':' and head[0:1] not in path_separators:
+            head = head[2:]
+
+        # Strip initial path separator from `head` to complete the conversion
+        # back to a root-relative path before joining.
+        return _path_join(
+            sys.pycache_prefix,
+            head.lstrip(path_separators),
+            filename,
+        )
+    return _path_join(head, _PYCACHE, filename)
+
+
+def source_from_cache(path):
+    """Given the path to a .pyc. file, return the path to its .py file.
+
+    The .pyc file does not need to exist; this simply returns the path to
+    the .py file calculated to correspond to the .pyc file.  If path does
+    not conform to PEP 3147/488 format, ValueError will be raised. If
+    sys.implementation.cache_tag is None then NotImplementedError is raised.
+
+    """
+    if sys.implementation.cache_tag is None:
+        raise NotImplementedError('sys.implementation.cache_tag is None')
+    path = _os.fspath(path)
+    head, pycache_filename = _path_split(path)
+    found_in_pycache_prefix = False
+    if sys.pycache_prefix is not None:
+        stripped_path = sys.pycache_prefix.rstrip(path_separators)
+        if head.startswith(stripped_path + path_sep):
+            head = head[len(stripped_path):]
+            found_in_pycache_prefix = True
+    if not found_in_pycache_prefix:
+        head, pycache = _path_split(head)
+        if pycache != _PYCACHE:
+            raise ValueError(f'{_PYCACHE} not bottom-level directory in '
+                             f'{path!r}')
+    dot_count = pycache_filename.count('.')
+    if dot_count not in {2, 3}:
+        raise ValueError(f'expected only 2 or 3 dots in {pycache_filename!r}')
+    elif dot_count == 3:
+        optimization = pycache_filename.rsplit('.', 2)[-2]
+        if not optimization.startswith(_OPT):
+            raise ValueError("optimization portion of filename does not start "
+                             f"with {_OPT!r}")
+        opt_level = optimization[len(_OPT):]
+        if not opt_level.isalnum():
+            raise ValueError(f"optimization level {optimization!r} is not an "
+                             "alphanumeric value")
+    base_filename = pycache_filename.partition('.')[0]
+    return _path_join(head, base_filename + SOURCE_SUFFIXES[0])
+
+
+def _get_sourcefile(bytecode_path):
+    """Convert a bytecode file path to a source path (if possible).
+
+    This function exists purely for backwards-compatibility for
+    PyImport_ExecCodeModuleWithFilenames() in the C API.
+
+    """
+    if len(bytecode_path) == 0:
+        return None
+    rest, _, extension = bytecode_path.rpartition('.')
+    if not rest or extension.lower()[-3:-1] != 'py':
+        return bytecode_path
+    try:
+        source_path = source_from_cache(bytecode_path)
+    except (NotImplementedError, ValueError):
+        source_path = bytecode_path[:-1]
+    return source_path if _path_isfile(source_path) else bytecode_path
+
+
+def _get_cached(filename):
+    if filename.endswith(tuple(SOURCE_SUFFIXES)):
+        try:
+            return cache_from_source(filename)
+        except NotImplementedError:
+            pass
+    elif filename.endswith(tuple(BYTECODE_SUFFIXES)):
+        return filename
+    else:
+        return None
+
+
+def _calc_mode(path):
+    """Calculate the mode permissions for a bytecode file."""
+    try:
+        mode = _path_stat(path).st_mode
+    except OSError:
+        mode = 0o666
+    # We always ensure write access so we can update cached files
+    # later even when the source files are read-only on Windows (#6074)
+    mode |= 0o200
+    return mode
+
+
+def _check_name(method):
+    """Decorator to verify that the module being requested matches the one the
+    loader can handle.
+
+    The first argument (self) must define _name which the second argument is
+    compared against. If the comparison fails then ImportError is raised.
+
+    """
+    def _check_name_wrapper(self, name=None, *args, **kwargs):
+        if name is None:
+            name = self.name
+        elif self.name != name:
+            raise ImportError('loader for %s cannot handle %s' %
+                                (self.name, name), name=name)
+        return method(self, name, *args, **kwargs)
+
+    # FIXME: @_check_name is used to define class methods before the
+    # _bootstrap module is set by _set_bootstrap_module().
+    if _bootstrap is not None:
+        _wrap = _bootstrap._wrap
+    else:
+        def _wrap(new, old):
+            for replace in ['__module__', '__name__', '__qualname__', '__doc__']:
+                if hasattr(old, replace):
+                    setattr(new, replace, getattr(old, replace))
+            new.__dict__.update(old.__dict__)
+
+    _wrap(_check_name_wrapper, method)
+    return _check_name_wrapper
+
+
+def _classify_pyc(data, name, exc_details):
+    """Perform basic validity checking of a pyc header and return the flags field,
+    which determines how the pyc should be further validated against the source.
+
+    *data* is the contents of the pyc file. (Only the first 16 bytes are
+    required, though.)
+
+    *name* is the name of the module being imported. It is used for logging.
+
+    *exc_details* is a dictionary passed to ImportError if it raised for
+    improved debugging.
+
+    ImportError is raised when the magic number is incorrect or when the flags
+    field is invalid. EOFError is raised when the data is found to be truncated.
+
+    """
+    magic = data[:4]
+    if magic != MAGIC_NUMBER:
+        message = f'bad magic number in {name!r}: {magic!r}'
+        _bootstrap._verbose_message('{}', message)
+        raise ImportError(message, **exc_details)
+    if len(data) < 16:
+        message = f'reached EOF while reading pyc header of {name!r}'
+        _bootstrap._verbose_message('{}', message)
+        raise EOFError(message)
+    flags = _unpack_uint32(data[4:8])
+    # Only the first two flags are defined.
+    if flags & ~0b11:
+        message = f'invalid flags {flags!r} in {name!r}'
+        raise ImportError(message, **exc_details)
+    return flags
+
+
+def _validate_timestamp_pyc(data, source_mtime, source_size, name,
+                            exc_details):
+    """Validate a pyc against the source last-modified time.
+
+    *data* is the contents of the pyc file. (Only the first 16 bytes are
+    required.)
+
+    *source_mtime* is the last modified timestamp of the source file.
+
+    *source_size* is None or the size of the source file in bytes.
+
+    *name* is the name of the module being imported. It is used for logging.
+
+    *exc_details* is a dictionary passed to ImportError if it raised for
+    improved debugging.
+
+    An ImportError is raised if the bytecode is stale.
+
+    """
+    if _unpack_uint32(data[8:12]) != (source_mtime & 0xFFFFFFFF):
+        message = f'bytecode is stale for {name!r}'
+        _bootstrap._verbose_message('{}', message)
+        raise ImportError(message, **exc_details)
+    if (source_size is not None and
+        _unpack_uint32(data[12:16]) != (source_size & 0xFFFFFFFF)):
+        raise ImportError(f'bytecode is stale for {name!r}', **exc_details)
+
+
+def _validate_hash_pyc(data, source_hash, name, exc_details):
+    """Validate a hash-based pyc by checking the real source hash against the one in
+    the pyc header.
+
+    *data* is the contents of the pyc file. (Only the first 16 bytes are
+    required.)
+
+    *source_hash* is the importlib.util.source_hash() of the source file.
+
+    *name* is the name of the module being imported. It is used for logging.
+
+    *exc_details* is a dictionary passed to ImportError if it raised for
+    improved debugging.
+
+    An ImportError is raised if the bytecode is stale.
+
+    """
+    if data[8:16] != source_hash:
+        raise ImportError(
+            f'hash in bytecode doesn\'t match hash of source {name!r}',
+            **exc_details,
+        )
+
+
+def _compile_bytecode(data, name=None, bytecode_path=None, source_path=None):
+    """Compile bytecode as found in a pyc."""
+    code = marshal.loads(data)
+    if isinstance(code, _code_type):
+        _bootstrap._verbose_message('code object from {!r}', bytecode_path)
+        if source_path is not None:
+            _imp._fix_co_filename(code, source_path)
+        return code
+    else:
+        raise ImportError(f'Non-code object in {bytecode_path!r}',
+                          name=name, path=bytecode_path)
+
+
+def _code_to_timestamp_pyc(code, mtime=0, source_size=0):
+    "Produce the data for a timestamp-based pyc."
+    data = bytearray(MAGIC_NUMBER)
+    data.extend(_pack_uint32(0))
+    data.extend(_pack_uint32(mtime))
+    data.extend(_pack_uint32(source_size))
+    data.extend(marshal.dumps(code))
+    return data
+
+
+def _code_to_hash_pyc(code, source_hash, checked=True):
+    "Produce the data for a hash-based pyc."
+    data = bytearray(MAGIC_NUMBER)
+    flags = 0b1 | checked << 1
+    data.extend(_pack_uint32(flags))
+    assert len(source_hash) == 8
+    data.extend(source_hash)
+    data.extend(marshal.dumps(code))
+    return data
+
+
+def decode_source(source_bytes):
+    """Decode bytes representing source code and return the string.
+
+    Universal newline support is used in the decoding.
+    """
+    import tokenize  # To avoid bootstrap issues.
+    source_bytes_readline = _io.BytesIO(source_bytes).readline
+    encoding = tokenize.detect_encoding(source_bytes_readline)
+    newline_decoder = _io.IncrementalNewlineDecoder(None, True)
+    return newline_decoder.decode(source_bytes.decode(encoding[0]))
+
+
+# Module specifications #######################################################
+
+_POPULATE = object()
+
+
+def spec_from_file_location(name, location=None, *, loader=None,
+                            submodule_search_locations=_POPULATE):
+    """Return a module spec based on a file location.
+
+    To indicate that the module is a package, set
+    submodule_search_locations to a list of directory paths.  An
+    empty list is sufficient, though its not otherwise useful to the
+    import system.
+
+    The loader must take a spec as its only __init__() arg.
+
+    """
+    if location is None:
+        # The caller may simply want a partially populated location-
+        # oriented spec.  So we set the location to a bogus value and
+        # fill in as much as we can.
+        location = '<unknown>'
+        if hasattr(loader, 'get_filename'):
+            # ExecutionLoader
+            try:
+                location = loader.get_filename(name)
+            except ImportError:
+                pass
+    else:
+        location = _os.fspath(location)
+        try:
+            location = _path_abspath(location)
+        except OSError:
+            pass
+
+    # If the location is on the filesystem, but doesn't actually exist,
+    # we could return None here, indicating that the location is not
+    # valid.  However, we don't have a good way of testing since an
+    # indirect location (e.g. a zip file or URL) will look like a
+    # non-existent file relative to the filesystem.
+
+    spec = _bootstrap.ModuleSpec(name, loader, origin=location)
+    spec._set_fileattr = True
+
+    # Pick a loader if one wasn't provided.
+    if loader is None:
+        for loader_class, suffixes in _get_supported_file_loaders():
+            if location.endswith(tuple(suffixes)):
+                loader = loader_class(name, location)
+                spec.loader = loader
+                break
+        else:
+            return None
+
+    # Set submodule_search_paths appropriately.
+    if submodule_search_locations is _POPULATE:
+        # Check the loader.
+        if hasattr(loader, 'is_package'):
+            try:
+                is_package = loader.is_package(name)
+            except ImportError:
+                pass
+            else:
+                if is_package:
+                    spec.submodule_search_locations = []
+    else:
+        spec.submodule_search_locations = submodule_search_locations
+    if spec.submodule_search_locations == []:
+        if location:
+            dirname = _path_split(location)[0]
+            spec.submodule_search_locations.append(dirname)
+
+    return spec
+
+
+def _bless_my_loader(module_globals):
+    """Helper function for _warnings.c
+
+    See GH#97850 for details.
+    """
+    # 2022-10-06(warsaw): For now, this helper is only used in _warnings.c and
+    # that use case only has the module globals.  This function could be
+    # extended to accept either that or a module object.  However, in the
+    # latter case, it would be better to raise certain exceptions when looking
+    # at a module, which should have either a __loader__ or __spec__.loader.
+    # For backward compatibility, it is possible that we'll get an empty
+    # dictionary for the module globals, and that cannot raise an exception.
+    if not isinstance(module_globals, dict):
+        return None
+
+    missing = object()
+    loader = module_globals.get('__loader__', None)
+    spec = module_globals.get('__spec__', missing)
+
+    if loader is None:
+        if spec is missing:
+            # If working with a module:
+            # raise AttributeError('Module globals is missing a __spec__')
+            return None
+        elif spec is None:
+            raise ValueError('Module globals is missing a __spec__.loader')
+
+    spec_loader = getattr(spec, 'loader', missing)
+
+    if spec_loader in (missing, None):
+        if loader is None:
+            exc = AttributeError if spec_loader is missing else ValueError
+            raise exc('Module globals is missing a __spec__.loader')
+        _warnings.warn(
+            'Module globals is missing a __spec__.loader',
+            DeprecationWarning)
+        spec_loader = loader
+
+    assert spec_loader is not None
+    if loader is not None and loader != spec_loader:
+        _warnings.warn(
+            'Module globals; __loader__ != __spec__.loader',
+            DeprecationWarning)
+        return loader
+
+    return spec_loader
+
+
+# Loaders #####################################################################
+
+class WindowsRegistryFinder:
+
+    """Meta path finder for modules declared in the Windows registry."""
+
+    REGISTRY_KEY = (
+        'Software\\Python\\PythonCore\\{sys_version}'
+        '\\Modules\\{fullname}')
+    REGISTRY_KEY_DEBUG = (
+        'Software\\Python\\PythonCore\\{sys_version}'
+        '\\Modules\\{fullname}\\Debug')
+    DEBUG_BUILD = (_MS_WINDOWS and '_d.pyd' in EXTENSION_SUFFIXES)
+
+    @staticmethod
+    def _open_registry(key):
+        try:
+            return winreg.OpenKey(winreg.HKEY_CURRENT_USER, key)
+        except OSError:
+            return winreg.OpenKey(winreg.HKEY_LOCAL_MACHINE, key)
+
+    @classmethod
+    def _search_registry(cls, fullname):
+        if cls.DEBUG_BUILD:
+            registry_key = cls.REGISTRY_KEY_DEBUG
+        else:
+            registry_key = cls.REGISTRY_KEY
+        key = registry_key.format(fullname=fullname,
+                                  sys_version='%d.%d' % sys.version_info[:2])
+        try:
+            with cls._open_registry(key) as hkey:
+                filepath = winreg.QueryValue(hkey, '')
+        except OSError:
+            return None
+        return filepath
+
+    @classmethod
+    def find_spec(cls, fullname, path=None, target=None):
+        _warnings.warn('importlib.machinery.WindowsRegistryFinder is '
+                       'deprecated; use site configuration instead. '
+                       'Future versions of Python may not enable this '
+                       'finder by default.',
+                       DeprecationWarning, stacklevel=2)
+
+        filepath = cls._search_registry(fullname)
+        if filepath is None:
+            return None
+        try:
+            _path_stat(filepath)
+        except OSError:
+            return None
+        for loader, suffixes in _get_supported_file_loaders():
+            if filepath.endswith(tuple(suffixes)):
+                spec = _bootstrap.spec_from_loader(fullname,
+                                                   loader(fullname, filepath),
+                                                   origin=filepath)
+                return spec
+
+
+class _LoaderBasics:
+
+    """Base class of common code needed by both SourceLoader and
+    SourcelessFileLoader."""
+
+    def is_package(self, fullname):
+        """Concrete implementation of InspectLoader.is_package by checking if
+        the path returned by get_filename has a filename of '__init__.py'."""
+        filename = _path_split(self.get_filename(fullname))[1]
+        filename_base = filename.rsplit('.', 1)[0]
+        tail_name = fullname.rpartition('.')[2]
+        return filename_base == '__init__' and tail_name != '__init__'
+
+    def create_module(self, spec):
+        """Use default semantics for module creation."""
+
+    def exec_module(self, module):
+        """Execute the module."""
+        code = self.get_code(module.__name__)
+        if code is None:
+            raise ImportError(f'cannot load module {module.__name__!r} when '
+                              'get_code() returns None')
+        _bootstrap._call_with_frames_removed(exec, code, module.__dict__)
+
+    def load_module(self, fullname):
+        """This method is deprecated."""
+        # Warning implemented in _load_module_shim().
+        return _bootstrap._load_module_shim(self, fullname)
+
+
+class SourceLoader(_LoaderBasics):
+
+    def path_mtime(self, path):
+        """Optional method that returns the modification time (an int) for the
+        specified path (a str).
+
+        Raises OSError when the path cannot be handled.
+        """
+        raise OSError
+
+    def path_stats(self, path):
+        """Optional method returning a metadata dict for the specified
+        path (a str).
+
+        Possible keys:
+        - 'mtime' (mandatory) is the numeric timestamp of last source
+          code modification;
+        - 'size' (optional) is the size in bytes of the source code.
+
+        Implementing this method allows the loader to read bytecode files.
+        Raises OSError when the path cannot be handled.
+        """
+        return {'mtime': self.path_mtime(path)}
+
+    def _cache_bytecode(self, source_path, cache_path, data):
+        """Optional method which writes data (bytes) to a file path (a str).
+
+        Implementing this method allows for the writing of bytecode files.
+
+        The source path is needed in order to correctly transfer permissions
+        """
+        # For backwards compatibility, we delegate to set_data()
+        return self.set_data(cache_path, data)
+
+    def set_data(self, path, data):
+        """Optional method which writes data (bytes) to a file path (a str).
+
+        Implementing this method allows for the writing of bytecode files.
+        """
+
+
+    def get_source(self, fullname):
+        """Concrete implementation of InspectLoader.get_source."""
+        path = self.get_filename(fullname)
+        try:
+            source_bytes = self.get_data(path)
+        except OSError as exc:
+            raise ImportError('source not available through get_data()',
+                              name=fullname) from exc
+        return decode_source(source_bytes)
+
+    def source_to_code(self, data, path, *, _optimize=-1):
+        """Return the code object compiled from source.
+
+        The 'data' argument can be any object type that compile() supports.
+        """
+        return _bootstrap._call_with_frames_removed(compile, data, path, 'exec',
+                                        dont_inherit=True, optimize=_optimize)
+
+    def get_code(self, fullname):
+        """Concrete implementation of InspectLoader.get_code.
+
+        Reading of bytecode requires path_stats to be implemented. To write
+        bytecode, set_data must also be implemented.
+
+        """
+        source_path = self.get_filename(fullname)
+        source_mtime = None
+        source_bytes = None
+        source_hash = None
+        hash_based = False
+        check_source = True
+        try:
+            bytecode_path = cache_from_source(source_path)
+        except NotImplementedError:
+            bytecode_path = None
+        else:
+            try:
+                st = self.path_stats(source_path)
+            except OSError:
+                pass
+            else:
+                source_mtime = int(st['mtime'])
+                try:
+                    data = self.get_data(bytecode_path)
+                except OSError:
+                    pass
+                else:
+                    exc_details = {
+                        'name': fullname,
+                        'path': bytecode_path,
+                    }
+                    try:
+                        flags = _classify_pyc(data, fullname, exc_details)
+                        bytes_data = memoryview(data)[16:]
+                        hash_based = flags & 0b1 != 0
+                        if hash_based:
+                            check_source = flags & 0b10 != 0
+                            if (_imp.check_hash_based_pycs != 'never' and
+                                (check_source or
+                                 _imp.check_hash_based_pycs == 'always')):
+                                source_bytes = self.get_data(source_path)
+                                source_hash = _imp.source_hash(
+                                    _imp.pyc_magic_number_token,
+                                    source_bytes,
+                                )
+                                _validate_hash_pyc(data, source_hash, fullname,
+                                                   exc_details)
+                        else:
+                            _validate_timestamp_pyc(
+                                data,
+                                source_mtime,
+                                st['size'],
+                                fullname,
+                                exc_details,
+                            )
+                    except (ImportError, EOFError):
+                        pass
+                    else:
+                        _bootstrap._verbose_message('{} matches {}', bytecode_path,
+                                                    source_path)
+                        return _compile_bytecode(bytes_data, name=fullname,
+                                                 bytecode_path=bytecode_path,
+                                                 source_path=source_path)
+        if source_bytes is None:
+            source_bytes = self.get_data(source_path)
+        code_object = self.source_to_code(source_bytes, source_path)
+        _bootstrap._verbose_message('code object from {}', source_path)
+        if (not sys.dont_write_bytecode and bytecode_path is not None and
+                source_mtime is not None):
+            if hash_based:
+                if source_hash is None:
+                    source_hash = _imp.source_hash(_imp.pyc_magic_number_token,
+                                                   source_bytes)
+                data = _code_to_hash_pyc(code_object, source_hash, check_source)
+            else:
+                data = _code_to_timestamp_pyc(code_object, source_mtime,
+                                              len(source_bytes))
+            try:
+                self._cache_bytecode(source_path, bytecode_path, data)
+            except NotImplementedError:
+                pass
+        return code_object
+
+
+class FileLoader:
+
+    """Base file loader class which implements the loader protocol methods that
+    require file system usage."""
+
+    def __init__(self, fullname, path):
+        """Cache the module name and the path to the file found by the
+        finder."""
+        self.name = fullname
+        self.path = path
+
+    def __eq__(self, other):
+        return (self.__class__ == other.__class__ and
+                self.__dict__ == other.__dict__)
+
+    def __hash__(self):
+        return hash(self.name) ^ hash(self.path)
+
+    @_check_name
+    def load_module(self, fullname):
+        """Load a module from a file.
+
+        This method is deprecated.  Use exec_module() instead.
+
+        """
+        # The only reason for this method is for the name check.
+        # Issue #14857: Avoid the zero-argument form of super so the implementation
+        # of that form can be updated without breaking the frozen module.
+        return super(FileLoader, self).load_module(fullname)
+
+    @_check_name
+    def get_filename(self, fullname):
+        """Return the path to the source file as found by the finder."""
+        return self.path
+
+    def get_data(self, path):
+        """Return the data from path as raw bytes."""
+        if isinstance(self, (SourceLoader, SourcelessFileLoader, ExtensionFileLoader)):
+            with _io.open_code(str(path)) as file:
+                return file.read()
+        else:
+            with _io.FileIO(path, 'r') as file:
+                return file.read()
+
+    @_check_name
+    def get_resource_reader(self, module):
+        from importlib.readers import FileReader
+        return FileReader(self)
+
+
+class SourceFileLoader(FileLoader, SourceLoader):
+
+    """Concrete implementation of SourceLoader using the file system."""
+
+    def path_stats(self, path):
+        """Return the metadata for the path."""
+        st = _path_stat(path)
+        return {'mtime': st.st_mtime, 'size': st.st_size}
+
+    def _cache_bytecode(self, source_path, bytecode_path, data):
+        # Adapt between the two APIs
+        mode = _calc_mode(source_path)
+        return self.set_data(bytecode_path, data, _mode=mode)
+
+    def set_data(self, path, data, *, _mode=0o666):
+        """Write bytes data to a file."""
+        parent, filename = _path_split(path)
+        path_parts = []
+        # Figure out what directories are missing.
+        while parent and not _path_isdir(parent):
+            parent, part = _path_split(parent)
+            path_parts.append(part)
+        # Create needed directories.
+        for part in reversed(path_parts):
+            parent = _path_join(parent, part)
+            try:
+                _os.mkdir(parent)
+            except FileExistsError:
+                # Probably another Python process already created the dir.
+                continue
+            except OSError as exc:
+                # Could be a permission error, read-only filesystem: just forget
+                # about writing the data.
+                _bootstrap._verbose_message('could not create {!r}: {!r}',
+                                            parent, exc)
+                return
+        try:
+            _write_atomic(path, data, _mode)
+            _bootstrap._verbose_message('created {!r}', path)
+        except OSError as exc:
+            # Same as above: just don't write the bytecode.
+            _bootstrap._verbose_message('could not create {!r}: {!r}', path,
+                                        exc)
+
+
+class SourcelessFileLoader(FileLoader, _LoaderBasics):
+
+    """Loader which handles sourceless file imports."""
+
+    def get_code(self, fullname):
+        path = self.get_filename(fullname)
+        data = self.get_data(path)
+        # Call _classify_pyc to do basic validation of the pyc but ignore the
+        # result. There's no source to check against.
+        exc_details = {
+            'name': fullname,
+            'path': path,
+        }
+        _classify_pyc(data, fullname, exc_details)
+        return _compile_bytecode(
+            memoryview(data)[16:],
+            name=fullname,
+            bytecode_path=path,
+        )
+
+    def get_source(self, fullname):
+        """Return None as there is no source code."""
+        return None
+
+
+class ExtensionFileLoader(FileLoader, _LoaderBasics):
+
+    """Loader for extension modules.
+
+    The constructor is designed to work with FileFinder.
+
+    """
+
+    def __init__(self, name, path):
+        self.name = name
+        self.path = path
+
+    def __eq__(self, other):
+        return (self.__class__ == other.__class__ and
+                self.__dict__ == other.__dict__)
+
+    def __hash__(self):
+        return hash(self.name) ^ hash(self.path)
+
+    def create_module(self, spec):
+        """Create an uninitialized extension module"""
+        module = _bootstrap._call_with_frames_removed(
+            _imp.create_dynamic, spec)
+        _bootstrap._verbose_message('extension module {!r} loaded from {!r}',
+                         spec.name, self.path)
+        return module
+
+    def exec_module(self, module):
+        """Initialize an extension module"""
+        _bootstrap._call_with_frames_removed(_imp.exec_dynamic, module)
+        _bootstrap._verbose_message('extension module {!r} executed from {!r}',
+                         self.name, self.path)
+
+    def is_package(self, fullname):
+        """Return True if the extension module is a package."""
+        file_name = _path_split(self.path)[1]
+        return any(file_name == '__init__' + suffix
+                   for suffix in EXTENSION_SUFFIXES)
+
+    def get_code(self, fullname):
+        """Return None as an extension module cannot create a code object."""
+        return None
+
+    def get_source(self, fullname):
+        """Return None as extension modules have no source code."""
+        return None
+
+    @_check_name
+    def get_filename(self, fullname):
+        """Return the path to the source file as found by the finder."""
+        return self.path
+
+
+class _NamespacePath:
+    """Represents a namespace package's path.  It uses the module name
+    to find its parent module, and from there it looks up the parent's
+    __path__.  When this changes, the module's own path is recomputed,
+    using path_finder.  For top-level modules, the parent module's path
+    is sys.path."""
+
+    # When invalidate_caches() is called, this epoch is incremented
+    # https://bugs.python.org/issue45703
+    _epoch = 0
+
+    def __init__(self, name, path, path_finder):
+        self._name = name
+        self._path = path
+        self._last_parent_path = tuple(self._get_parent_path())
+        self._last_epoch = self._epoch
+        self._path_finder = path_finder
+
+    def _find_parent_path_names(self):
+        """Returns a tuple of (parent-module-name, parent-path-attr-name)"""
+        parent, dot, me = self._name.rpartition('.')
+        if dot == '':
+            # This is a top-level module. sys.path contains the parent path.
+            return 'sys', 'path'
+        # Not a top-level module. parent-module.__path__ contains the
+        #  parent path.
+        return parent, '__path__'
+
+    def _get_parent_path(self):
+        parent_module_name, path_attr_name = self._find_parent_path_names()
+        return getattr(sys.modules[parent_module_name], path_attr_name)
+
+    def _recalculate(self):
+        # If the parent's path has changed, recalculate _path
+        parent_path = tuple(self._get_parent_path()) # Make a copy
+        if parent_path != self._last_parent_path or self._epoch != self._last_epoch:
+            spec = self._path_finder(self._name, parent_path)
+            # Note that no changes are made if a loader is returned, but we
+            #  do remember the new parent path
+            if spec is not None and spec.loader is None:
+                if spec.submodule_search_locations:
+                    self._path = spec.submodule_search_locations
+            self._last_parent_path = parent_path     # Save the copy
+            self._last_epoch = self._epoch
+        return self._path
+
+    def __iter__(self):
+        return iter(self._recalculate())
+
+    def __getitem__(self, index):
+        return self._recalculate()[index]
+
+    def __setitem__(self, index, path):
+        self._path[index] = path
+
+    def __len__(self):
+        return len(self._recalculate())
+
+    def __repr__(self):
+        return f'_NamespacePath({self._path!r})'
+
+    def __contains__(self, item):
+        return item in self._recalculate()
+
+    def append(self, item):
+        self._path.append(item)
+
+
+# This class is actually exposed publicly in a namespace package's __loader__
+# attribute, so it should be available through a non-private name.
+# https://github.com/python/cpython/issues/92054
+class NamespaceLoader:
+    def __init__(self, name, path, path_finder):
+        self._path = _NamespacePath(name, path, path_finder)
+
+    def is_package(self, fullname):
+        return True
+
+    def get_source(self, fullname):
+        return ''
+
+    def get_code(self, fullname):
+        return compile('', '<string>', 'exec', dont_inherit=True)
+
+    def create_module(self, spec):
+        """Use default semantics for module creation."""
+
+    def exec_module(self, module):
+        pass
+
+    def load_module(self, fullname):
+        """Load a namespace module.
+
+        This method is deprecated.  Use exec_module() instead.
+
+        """
+        # The import system never calls this method.
+        _bootstrap._verbose_message('namespace module loaded with path {!r}',
+                                    self._path)
+        # Warning implemented in _load_module_shim().
+        return _bootstrap._load_module_shim(self, fullname)
+
+    def get_resource_reader(self, module):
+        from importlib.readers import NamespaceReader
+        return NamespaceReader(self._path)
+
+
+# We use this exclusively in module_from_spec() for backward-compatibility.
+_NamespaceLoader = NamespaceLoader
+
+
+# Finders #####################################################################
+
+class PathFinder:
+
+    """Meta path finder for sys.path and package __path__ attributes."""
+
+    @staticmethod
+    def invalidate_caches():
+        """Call the invalidate_caches() method on all path entry finders
+        stored in sys.path_importer_cache (where implemented)."""
+        for name, finder in list(sys.path_importer_cache.items()):
+            # Drop entry if finder name is a relative path. The current
+            # working directory may have changed.
+            if finder is None or not _path_isabs(name):
+                del sys.path_importer_cache[name]
+            elif hasattr(finder, 'invalidate_caches'):
+                finder.invalidate_caches()
+        # Also invalidate the caches of _NamespacePaths
+        # https://bugs.python.org/issue45703
+        _NamespacePath._epoch += 1
+
+        from importlib.metadata import MetadataPathFinder
+        MetadataPathFinder.invalidate_caches()
+
+    @staticmethod
+    def _path_hooks(path):
+        """Search sys.path_hooks for a finder for 'path'."""
+        if sys.path_hooks is not None and not sys.path_hooks:
+            _warnings.warn('sys.path_hooks is empty', ImportWarning)
+        for hook in sys.path_hooks:
+            try:
+                return hook(path)
+            except ImportError:
+                continue
+        else:
+            return None
+
+    @classmethod
+    def _path_importer_cache(cls, path):
+        """Get the finder for the path entry from sys.path_importer_cache.
+
+        If the path entry is not in the cache, find the appropriate finder
+        and cache it. If no finder is available, store None.
+
+        """
+        if path == '':
+            try:
+                path = _os.getcwd()
+            except (FileNotFoundError, PermissionError):
+                # Don't cache the failure as the cwd can easily change to
+                # a valid directory later on.
+                return None
+        try:
+            finder = sys.path_importer_cache[path]
+        except KeyError:
+            finder = cls._path_hooks(path)
+            sys.path_importer_cache[path] = finder
+        return finder
+
+    @classmethod
+    def _get_spec(cls, fullname, path, target=None):
+        """Find the loader or namespace_path for this module/package name."""
+        # If this ends up being a namespace package, namespace_path is
+        #  the list of paths that will become its __path__
+        namespace_path = []
+        for entry in path:
+            if not isinstance(entry, str):
+                continue
+            finder = cls._path_importer_cache(entry)
+            if finder is not None:
+                spec = finder.find_spec(fullname, target)
+                if spec is None:
+                    continue
+                if spec.loader is not None:
+                    return spec
+                portions = spec.submodule_search_locations
+                if portions is None:
+                    raise ImportError('spec missing loader')
+                # This is possibly part of a namespace package.
+                #  Remember these path entries (if any) for when we
+                #  create a namespace package, and continue iterating
+                #  on path.
+                namespace_path.extend(portions)
+        else:
+            spec = _bootstrap.ModuleSpec(fullname, None)
+            spec.submodule_search_locations = namespace_path
+            return spec
+
+    @classmethod
+    def find_spec(cls, fullname, path=None, target=None):
+        """Try to find a spec for 'fullname' on sys.path or 'path'.
+
+        The search is based on sys.path_hooks and sys.path_importer_cache.
+        """
+        if path is None:
+            path = sys.path
+        spec = cls._get_spec(fullname, path, target)
+        if spec is None:
+            return None
+        elif spec.loader is None:
+            namespace_path = spec.submodule_search_locations
+            if namespace_path:
+                # We found at least one namespace path.  Return a spec which
+                # can create the namespace package.
+                spec.origin = None
+                spec.submodule_search_locations = _NamespacePath(fullname, namespace_path, cls._get_spec)
+                return spec
+            else:
+                return None
+        else:
+            return spec
+
+    @staticmethod
+    def find_distributions(*args, **kwargs):
+        """
+        Find distributions.
+
+        Return an iterable of all Distribution instances capable of
+        loading the metadata for packages matching ``context.name``
+        (or all names if ``None`` indicated) along the paths in the list
+        of directories ``context.path``.
+        """
+        from importlib.metadata import MetadataPathFinder
+        return MetadataPathFinder.find_distributions(*args, **kwargs)
+
+
+class FileFinder:
+
+    """File-based finder.
+
+    Interactions with the file system are cached for performance, being
+    refreshed when the directory the finder is handling has been modified.
+
+    """
+
+    def __init__(self, path, *loader_details):
+        """Initialize with the path to search on and a variable number of
+        2-tuples containing the loader and the file suffixes the loader
+        recognizes."""
+        loaders = []
+        for loader, suffixes in loader_details:
+            loaders.extend((suffix, loader) for suffix in suffixes)
+        self._loaders = loaders
+        # Base (directory) path
+        if not path or path == '.':
+            self.path = _os.getcwd()
+        else:
+            self.path = _path_abspath(path)
+        self._path_mtime = -1
+        self._path_cache = set()
+        self._relaxed_path_cache = set()
+
+    def invalidate_caches(self):
+        """Invalidate the directory mtime."""
+        self._path_mtime = -1
+
+    def _get_spec(self, loader_class, fullname, path, smsl, target):
+        loader = loader_class(fullname, path)
+        return spec_from_file_location(fullname, path, loader=loader,
+                                       submodule_search_locations=smsl)
+
+    def find_spec(self, fullname, target=None):
+        """Try to find a spec for the specified module.
+
+        Returns the matching spec, or None if not found.
+        """
+        is_namespace = False
+        tail_module = fullname.rpartition('.')[2]
+        try:
+            mtime = _path_stat(self.path or _os.getcwd()).st_mtime
+        except OSError:
+            mtime = -1
+        if mtime != self._path_mtime:
+            self._fill_cache()
+            self._path_mtime = mtime
+        # tail_module keeps the original casing, for __file__ and friends
+        if _relax_case():
+            cache = self._relaxed_path_cache
+            cache_module = tail_module.lower()
+        else:
+            cache = self._path_cache
+            cache_module = tail_module
+        # Check if the module is the name of a directory (and thus a package).
+        if cache_module in cache:
+            base_path = _path_join(self.path, tail_module)
+            for suffix, loader_class in self._loaders:
+                init_filename = '__init__' + suffix
+                full_path = _path_join(base_path, init_filename)
+                if _path_isfile(full_path):
+                    return self._get_spec(loader_class, fullname, full_path, [base_path], target)
+            else:
+                # If a namespace package, return the path if we don't
+                #  find a module in the next section.
+                is_namespace = _path_isdir(base_path)
+        # Check for a file w/ a proper suffix exists.
+        for suffix, loader_class in self._loaders:
+            try:
+                full_path = _path_join(self.path, tail_module + suffix)
+            except ValueError:
+                return None
+            _bootstrap._verbose_message('trying {}', full_path, verbosity=2)
+            if cache_module + suffix in cache:
+                if _path_isfile(full_path):
+                    return self._get_spec(loader_class, fullname, full_path,
+                                          None, target)
+        if is_namespace:
+            _bootstrap._verbose_message('possible namespace for {}', base_path)
+            spec = _bootstrap.ModuleSpec(fullname, None)
+            spec.submodule_search_locations = [base_path]
+            return spec
+        return None
+
+    def _fill_cache(self):
+        """Fill the cache of potential modules and packages for this directory."""
+        path = self.path
+        try:
+            contents = _os.listdir(path or _os.getcwd())
+        except (FileNotFoundError, PermissionError, NotADirectoryError):
+            # Directory has either been removed, turned into a file, or made
+            # unreadable.
+            contents = []
+        # We store two cached versions, to handle runtime changes of the
+        # PYTHONCASEOK environment variable.
+        if not sys.platform.startswith('win'):
+            self._path_cache = set(contents)
+        else:
+            # Windows users can import modules with case-insensitive file
+            # suffixes (for legacy reasons). Make the suffix lowercase here
+            # so it's done once instead of for every import. This is safe as
+            # the specified suffixes to check against are always specified in a
+            # case-sensitive manner.
+            lower_suffix_contents = set()
+            for item in contents:
+                name, dot, suffix = item.partition('.')
+                if dot:
+                    new_name = f'{name}.{suffix.lower()}'
+                else:
+                    new_name = name
+                lower_suffix_contents.add(new_name)
+            self._path_cache = lower_suffix_contents
+        if sys.platform.startswith(_CASE_INSENSITIVE_PLATFORMS):
+            self._relaxed_path_cache = {fn.lower() for fn in contents}
+
+    @classmethod
+    def path_hook(cls, *loader_details):
+        """A class method which returns a closure to use on sys.path_hook
+        which will return an instance using the specified loaders and the path
+        called on the closure.
+
+        If the path called on the closure is not a directory, ImportError is
+        raised.
+
+        """
+        def path_hook_for_FileFinder(path):
+            """Path hook for importlib.machinery.FileFinder."""
+            if not _path_isdir(path):
+                raise ImportError('only directories are supported', path=path)
+            return cls(path, *loader_details)
+
+        return path_hook_for_FileFinder
+
+    def __repr__(self):
+        return f'FileFinder({self.path!r})'
+
+
+class AppleFrameworkLoader(ExtensionFileLoader):
+    """A loader for modules that have been packaged as frameworks for
+    compatibility with Apple's iOS App Store policies.
+    """
+    def create_module(self, spec):
+        # If the ModuleSpec has been created by the FileFinder, it will have
+        # been created with an origin pointing to the .fwork file. We need to
+        # redirect this to the location in the Frameworks folder, using the
+        # content of the .fwork file.
+        if spec.origin.endswith(".fwork"):
+            with _io.FileIO(spec.origin, 'r') as file:
+                framework_binary = file.read().decode().strip()
+            bundle_path = _path_split(sys.executable)[0]
+            spec.origin = _path_join(bundle_path, framework_binary)
+
+        # If the loader is created based on the spec for a loaded module, the
+        # path will be pointing at the Framework location. If this occurs,
+        # get the original .fwork location to use as the module's __file__.
+        if self.path.endswith(".fwork"):
+            path = self.path
+        else:
+            with _io.FileIO(self.path + ".origin", 'r') as file:
+                origin = file.read().decode().strip()
+                bundle_path = _path_split(sys.executable)[0]
+                path = _path_join(bundle_path, origin)
+
+        module = _bootstrap._call_with_frames_removed(_imp.create_dynamic, spec)
+
+        _bootstrap._verbose_message(
+            "Apple framework extension module {!r} loaded from {!r} (path {!r})",
+            spec.name,
+            spec.origin,
+            path,
+        )
+
+        # Ensure that the __file__ points at the .fwork location
+        try:
+            module.__file__ = path
+        except AttributeError:
+            # Not important enough to report.
+            # (The error is also ignored in _bootstrap._init_module_attrs or
+            # import_run_extension in import.c)
+            pass
+
+        return module
+
+# Import setup ###############################################################
+
+def _fix_up_module(ns, name, pathname, cpathname=None):
+    # This function is used by PyImport_ExecCodeModuleObject().
+    loader = ns.get('__loader__')
+    spec = ns.get('__spec__')
+    if not loader:
+        if spec:
+            loader = spec.loader
+        elif pathname == cpathname:
+            loader = SourcelessFileLoader(name, pathname)
+        else:
+            loader = SourceFileLoader(name, pathname)
+    if not spec:
+        spec = spec_from_file_location(name, pathname, loader=loader)
+        if cpathname:
+            spec.cached = _path_abspath(cpathname)
+    try:
+        ns['__spec__'] = spec
+        ns['__loader__'] = loader
+        ns['__file__'] = pathname
+        ns['__cached__'] = cpathname
+    except Exception:
+        # Not important enough to report.
+        pass
+
+
+def _get_supported_file_loaders():
+    """Returns a list of file-based module loaders.
+
+    Each item is a tuple (loader, suffixes).
+    """
+    extension_loaders = []
+    if hasattr(_imp, 'create_dynamic'):
+        if sys.platform in {"ios", "tvos", "watchos"}:
+            extension_loaders = [(AppleFrameworkLoader, [
+                suffix.replace(".so", ".fwork")
+                for suffix in _imp.extension_suffixes()
+            ])]
+        extension_loaders.append((ExtensionFileLoader, _imp.extension_suffixes()))
+    source = SourceFileLoader, SOURCE_SUFFIXES
+    bytecode = SourcelessFileLoader, BYTECODE_SUFFIXES
+    return extension_loaders + [source, bytecode]
+
+
+def _set_bootstrap_module(_bootstrap_module):
+    global _bootstrap
+    _bootstrap = _bootstrap_module
+
+
+def _install(_bootstrap_module):
+    """Install the path-based import components."""
+    _set_bootstrap_module(_bootstrap_module)
+    supported_loaders = _get_supported_file_loaders()
+    sys.path_hooks.extend([FileFinder.path_hook(*supported_loaders)])
+    sys.meta_path.append(PathFinder)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/abc.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/abc.py
new file mode 100644
index 0000000000000000000000000000000000000000..1e47495f65fa02f9f31860d673992338d09bed7a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/abc.py
@@ -0,0 +1,234 @@
+"""Abstract base classes related to import."""
+from . import _bootstrap_external
+from . import machinery
+try:
+    import _frozen_importlib
+except ImportError as exc:
+    if exc.name != '_frozen_importlib':
+        raise
+    _frozen_importlib = None
+try:
+    import _frozen_importlib_external
+except ImportError:
+    _frozen_importlib_external = _bootstrap_external
+from ._abc import Loader
+import abc
+
+
+__all__ = [
+    'Loader', 'MetaPathFinder', 'PathEntryFinder',
+    'ResourceLoader', 'InspectLoader', 'ExecutionLoader',
+    'FileLoader', 'SourceLoader',
+]
+
+
+def _register(abstract_cls, *classes):
+    for cls in classes:
+        abstract_cls.register(cls)
+        if _frozen_importlib is not None:
+            try:
+                frozen_cls = getattr(_frozen_importlib, cls.__name__)
+            except AttributeError:
+                frozen_cls = getattr(_frozen_importlib_external, cls.__name__)
+            abstract_cls.register(frozen_cls)
+
+
+class MetaPathFinder(metaclass=abc.ABCMeta):
+
+    """Abstract base class for import finders on sys.meta_path."""
+
+    # We don't define find_spec() here since that would break
+    # hasattr checks we do to support backward compatibility.
+
+    def invalidate_caches(self):
+        """An optional method for clearing the finder's cache, if any.
+        This method is used by importlib.invalidate_caches().
+        """
+
+_register(MetaPathFinder, machinery.BuiltinImporter, machinery.FrozenImporter,
+          machinery.PathFinder, machinery.WindowsRegistryFinder)
+
+
+class PathEntryFinder(metaclass=abc.ABCMeta):
+
+    """Abstract base class for path entry finders used by PathFinder."""
+
+    def invalidate_caches(self):
+        """An optional method for clearing the finder's cache, if any.
+        This method is used by PathFinder.invalidate_caches().
+        """
+
+_register(PathEntryFinder, machinery.FileFinder)
+
+
+class ResourceLoader(Loader):
+
+    """Abstract base class for loaders which can return data from their
+    back-end storage to facilitate reading data to perform an import.
+
+    This ABC represents one of the optional protocols specified by PEP 302.
+
+    For directly loading resources, use TraversableResources instead. This class
+    primarily exists for backwards compatibility with other ABCs in this module.
+
+    """
+
+    @abc.abstractmethod
+    def get_data(self, path):
+        """Abstract method which when implemented should return the bytes for
+        the specified path.  The path must be a str."""
+        raise OSError
+
+
+class InspectLoader(Loader):
+
+    """Abstract base class for loaders which support inspection about the
+    modules they can load.
+
+    This ABC represents one of the optional protocols specified by PEP 302.
+
+    """
+
+    def is_package(self, fullname):
+        """Optional method which when implemented should return whether the
+        module is a package.  The fullname is a str.  Returns a bool.
+
+        Raises ImportError if the module cannot be found.
+        """
+        raise ImportError
+
+    def get_code(self, fullname):
+        """Method which returns the code object for the module.
+
+        The fullname is a str.  Returns a types.CodeType if possible, else
+        returns None if a code object does not make sense
+        (e.g. built-in module). Raises ImportError if the module cannot be
+        found.
+        """
+        source = self.get_source(fullname)
+        if source is None:
+            return None
+        return self.source_to_code(source)
+
+    @abc.abstractmethod
+    def get_source(self, fullname):
+        """Abstract method which should return the source code for the
+        module.  The fullname is a str.  Returns a str.
+
+        Raises ImportError if the module cannot be found.
+        """
+        raise ImportError
+
+    @staticmethod
+    def source_to_code(data, path='<string>'):
+        """Compile 'data' into a code object.
+
+        The 'data' argument can be anything that compile() can handle. The'path'
+        argument should be where the data was retrieved (when applicable)."""
+        return compile(data, path, 'exec', dont_inherit=True)
+
+    exec_module = _bootstrap_external._LoaderBasics.exec_module
+    load_module = _bootstrap_external._LoaderBasics.load_module
+
+_register(InspectLoader, machinery.BuiltinImporter, machinery.FrozenImporter, machinery.NamespaceLoader)
+
+
+class ExecutionLoader(InspectLoader):
+
+    """Abstract base class for loaders that wish to support the execution of
+    modules as scripts.
+
+    This ABC represents one of the optional protocols specified in PEP 302.
+
+    """
+
+    @abc.abstractmethod
+    def get_filename(self, fullname):
+        """Abstract method which should return the value that __file__ is to be
+        set to.
+
+        Raises ImportError if the module cannot be found.
+        """
+        raise ImportError
+
+    def get_code(self, fullname):
+        """Method to return the code object for fullname.
+
+        Should return None if not applicable (e.g. built-in module).
+        Raise ImportError if the module cannot be found.
+        """
+        source = self.get_source(fullname)
+        if source is None:
+            return None
+        try:
+            path = self.get_filename(fullname)
+        except ImportError:
+            return self.source_to_code(source)
+        else:
+            return self.source_to_code(source, path)
+
+_register(
+    ExecutionLoader,
+    machinery.ExtensionFileLoader,
+    machinery.AppleFrameworkLoader,
+)
+
+
+class FileLoader(_bootstrap_external.FileLoader, ResourceLoader, ExecutionLoader):
+
+    """Abstract base class partially implementing the ResourceLoader and
+    ExecutionLoader ABCs."""
+
+_register(FileLoader, machinery.SourceFileLoader,
+            machinery.SourcelessFileLoader)
+
+
+class SourceLoader(_bootstrap_external.SourceLoader, ResourceLoader, ExecutionLoader):
+
+    """Abstract base class for loading source code (and optionally any
+    corresponding bytecode).
+
+    To support loading from source code, the abstractmethods inherited from
+    ResourceLoader and ExecutionLoader need to be implemented. To also support
+    loading from bytecode, the optional methods specified directly by this ABC
+    is required.
+
+    Inherited abstractmethods not implemented in this ABC:
+
+        * ResourceLoader.get_data
+        * ExecutionLoader.get_filename
+
+    """
+
+    def path_mtime(self, path):
+        """Return the (int) modification time for the path (str)."""
+        import warnings
+        warnings.warn('SourceLoader.path_mtime is deprecated in favour of '
+                      'SourceLoader.path_stats().',
+                      DeprecationWarning, stacklevel=2)
+        if self.path_stats.__func__ is SourceLoader.path_stats:
+            raise OSError
+        return int(self.path_stats(path)['mtime'])
+
+    def path_stats(self, path):
+        """Return a metadata dict for the source pointed to by the path (str).
+        Possible keys:
+        - 'mtime' (mandatory) is the numeric timestamp of last source
+          code modification;
+        - 'size' (optional) is the size in bytes of the source code.
+        """
+        if self.path_mtime.__func__ is SourceLoader.path_mtime:
+            raise OSError
+        return {'mtime': self.path_mtime(path)}
+
+    def set_data(self, path, data):
+        """Write the bytes to the path (if possible).
+
+        Accepts a str path and data as bytes.
+
+        Any needed intermediary directories are to be created. If for some
+        reason the file cannot be written because of permissions, fail
+        silently.
+        """
+
+_register(SourceLoader, machinery.SourceFileLoader)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/machinery.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/machinery.py
new file mode 100644
index 0000000000000000000000000000000000000000..63d726445c3d96d8dda46aed39897a10b8d05db1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/machinery.py
@@ -0,0 +1,50 @@
+"""The machinery of importlib: finders, loaders, hooks, etc."""
+
+from ._bootstrap import ModuleSpec
+from ._bootstrap import BuiltinImporter
+from ._bootstrap import FrozenImporter
+from ._bootstrap_external import (
+    SOURCE_SUFFIXES, BYTECODE_SUFFIXES, EXTENSION_SUFFIXES,
+    DEBUG_BYTECODE_SUFFIXES as _DEBUG_BYTECODE_SUFFIXES,
+    OPTIMIZED_BYTECODE_SUFFIXES as _OPTIMIZED_BYTECODE_SUFFIXES
+)
+from ._bootstrap_external import WindowsRegistryFinder
+from ._bootstrap_external import PathFinder
+from ._bootstrap_external import FileFinder
+from ._bootstrap_external import SourceFileLoader
+from ._bootstrap_external import SourcelessFileLoader
+from ._bootstrap_external import ExtensionFileLoader
+from ._bootstrap_external import AppleFrameworkLoader
+from ._bootstrap_external import NamespaceLoader
+
+
+def all_suffixes():
+    """Returns a list of all recognized module suffixes for this process"""
+    return SOURCE_SUFFIXES + BYTECODE_SUFFIXES + EXTENSION_SUFFIXES
+
+
+__all__ = ['AppleFrameworkLoader', 'BYTECODE_SUFFIXES', 'BuiltinImporter',
+           'DEBUG_BYTECODE_SUFFIXES', 'EXTENSION_SUFFIXES',
+           'ExtensionFileLoader', 'FileFinder', 'FrozenImporter', 'ModuleSpec',
+           'NamespaceLoader', 'OPTIMIZED_BYTECODE_SUFFIXES', 'PathFinder',
+           'SOURCE_SUFFIXES', 'SourceFileLoader', 'SourcelessFileLoader',
+           'WindowsRegistryFinder', 'all_suffixes']
+
+
+def __getattr__(name):
+    import warnings
+
+    if name == 'DEBUG_BYTECODE_SUFFIXES':
+        warnings.warn('importlib.machinery.DEBUG_BYTECODE_SUFFIXES is '
+                      'deprecated; use importlib.machinery.BYTECODE_SUFFIXES '
+                      'instead.',
+                      DeprecationWarning, stacklevel=2)
+        return _DEBUG_BYTECODE_SUFFIXES
+    elif name == 'OPTIMIZED_BYTECODE_SUFFIXES':
+        warnings.warn('importlib.machinery.OPTIMIZED_BYTECODE_SUFFIXES is '
+                      'deprecated; use importlib.machinery.BYTECODE_SUFFIXES '
+                      'instead.',
+                      DeprecationWarning, stacklevel=2)
+        return _OPTIMIZED_BYTECODE_SUFFIXES
+
+    raise AttributeError(f'module {__name__!r} has no attribute {name!r}')
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/readers.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/readers.py
new file mode 100644
index 0000000000000000000000000000000000000000..df7fb92e5cd9f5574e3b17a81228dabaeb922b96
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/readers.py
@@ -0,0 +1,12 @@
+"""
+Compatibility shim for .resources.readers as found on Python 3.10.
+
+Consumers that can rely on Python 3.11 should use the other
+module directly.
+"""
+
+from .resources.readers import (
+    FileReader, ZipReader, MultiplexedPath, NamespaceReader,
+)
+
+__all__ = ['FileReader', 'ZipReader', 'MultiplexedPath', 'NamespaceReader']
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/simple.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/simple.py
new file mode 100644
index 0000000000000000000000000000000000000000..845bb9036478447fa7e95c12cc30861fc4154e0e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/simple.py
@@ -0,0 +1,14 @@
+"""
+Compatibility shim for .resources.simple as found on Python 3.10.
+
+Consumers that can rely on Python 3.11 should use the other
+module directly.
+"""
+
+from .resources.simple import (
+    SimpleReader, ResourceHandle, ResourceContainer, TraversableReader,
+)
+
+__all__ = [
+    'SimpleReader', 'ResourceHandle', 'ResourceContainer', 'TraversableReader',
+]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..2b564e9b52e0cb247c66286e0c6a5788bd75c2cb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/importlib/util.py
@@ -0,0 +1,279 @@
+"""Utility code for constructing importers, etc."""
+from ._abc import Loader
+from ._bootstrap import module_from_spec
+from ._bootstrap import _resolve_name
+from ._bootstrap import spec_from_loader
+from ._bootstrap import _find_spec
+from ._bootstrap_external import MAGIC_NUMBER
+from ._bootstrap_external import cache_from_source
+from ._bootstrap_external import decode_source
+from ._bootstrap_external import source_from_cache
+from ._bootstrap_external import spec_from_file_location
+
+import _imp
+import sys
+import types
+
+
+def source_hash(source_bytes):
+    "Return the hash of *source_bytes* as used in hash-based pyc files."
+    return _imp.source_hash(_imp.pyc_magic_number_token, source_bytes)
+
+
+def resolve_name(name, package):
+    """Resolve a relative module name to an absolute one."""
+    if not name.startswith('.'):
+        return name
+    elif not package:
+        raise ImportError(f'no package specified for {repr(name)} '
+                          '(required for relative module names)')
+    level = 0
+    for character in name:
+        if character != '.':
+            break
+        level += 1
+    return _resolve_name(name[level:], package, level)
+
+
+def _find_spec_from_path(name, path=None):
+    """Return the spec for the specified module.
+
+    First, sys.modules is checked to see if the module was already imported. If
+    so, then sys.modules[name].__spec__ is returned. If that happens to be
+    set to None, then ValueError is raised. If the module is not in
+    sys.modules, then sys.meta_path is searched for a suitable spec with the
+    value of 'path' given to the finders. None is returned if no spec could
+    be found.
+
+    Dotted names do not have their parent packages implicitly imported. You will
+    most likely need to explicitly import all parent packages in the proper
+    order for a submodule to get the correct spec.
+
+    """
+    if name not in sys.modules:
+        return _find_spec(name, path)
+    else:
+        module = sys.modules[name]
+        if module is None:
+            return None
+        try:
+            spec = module.__spec__
+        except AttributeError:
+            raise ValueError(f'{name}.__spec__ is not set') from None
+        else:
+            if spec is None:
+                raise ValueError(f'{name}.__spec__ is None')
+            return spec
+
+
+def find_spec(name, package=None):
+    """Return the spec for the specified module.
+
+    First, sys.modules is checked to see if the module was already imported. If
+    so, then sys.modules[name].__spec__ is returned. If that happens to be
+    set to None, then ValueError is raised. If the module is not in
+    sys.modules, then sys.meta_path is searched for a suitable spec with the
+    value of 'path' given to the finders. None is returned if no spec could
+    be found.
+
+    If the name is for submodule (contains a dot), the parent module is
+    automatically imported.
+
+    The name and package arguments work the same as importlib.import_module().
+    In other words, relative module names (with leading dots) work.
+
+    """
+    fullname = resolve_name(name, package) if name.startswith('.') else name
+    if fullname not in sys.modules:
+        parent_name = fullname.rpartition('.')[0]
+        if parent_name:
+            parent = __import__(parent_name, fromlist=['__path__'])
+            try:
+                parent_path = parent.__path__
+            except AttributeError as e:
+                raise ModuleNotFoundError(
+                    f"__path__ attribute not found on {parent_name!r} "
+                    f"while trying to find {fullname!r}", name=fullname) from e
+        else:
+            parent_path = None
+        return _find_spec(fullname, parent_path)
+    else:
+        module = sys.modules[fullname]
+        if module is None:
+            return None
+        try:
+            spec = module.__spec__
+        except AttributeError:
+            raise ValueError(f'{name}.__spec__ is not set') from None
+        else:
+            if spec is None:
+                raise ValueError(f'{name}.__spec__ is None')
+            return spec
+
+
+# Normally we would use contextlib.contextmanager.  However, this module
+# is imported by runpy, which means we want to avoid any unnecessary
+# dependencies.  Thus we use a class.
+
+class _incompatible_extension_module_restrictions:
+    """A context manager that can temporarily skip the compatibility check.
+
+    NOTE: This function is meant to accommodate an unusual case; one
+    which is likely to eventually go away.  There's is a pretty good
+    chance this is not what you were looking for.
+
+    WARNING: Using this function to disable the check can lead to
+    unexpected behavior and even crashes.  It should only be used during
+    extension module development.
+
+    If "disable_check" is True then the compatibility check will not
+    happen while the context manager is active.  Otherwise the check
+    *will* happen.
+
+    Normally, extensions that do not support multiple interpreters
+    may not be imported in a subinterpreter.  That implies modules
+    that do not implement multi-phase init or that explicitly of out.
+
+    Likewise for modules import in a subinterpreter with its own GIL
+    when the extension does not support a per-interpreter GIL.  This
+    implies the module does not have a Py_mod_multiple_interpreters slot
+    set to Py_MOD_PER_INTERPRETER_GIL_SUPPORTED.
+
+    In both cases, this context manager may be used to temporarily
+    disable the check for compatible extension modules.
+
+    You can get the same effect as this function by implementing the
+    basic interface of multi-phase init (PEP 489) and lying about
+    support for multiple interpreters (or per-interpreter GIL).
+    """
+
+    def __init__(self, *, disable_check):
+        self.disable_check = bool(disable_check)
+
+    def __enter__(self):
+        self.old = _imp._override_multi_interp_extensions_check(self.override)
+        return self
+
+    def __exit__(self, *args):
+        old = self.old
+        del self.old
+        _imp._override_multi_interp_extensions_check(old)
+
+    @property
+    def override(self):
+        return -1 if self.disable_check else 1
+
+
+class _LazyModule(types.ModuleType):
+
+    """A subclass of the module type which triggers loading upon attribute access."""
+
+    def __getattribute__(self, attr):
+        """Trigger the load of the module and return the attribute."""
+        __spec__ = object.__getattribute__(self, '__spec__')
+        loader_state = __spec__.loader_state
+        with loader_state['lock']:
+            # Only the first thread to get the lock should trigger the load
+            # and reset the module's class. The rest can now getattr().
+            if object.__getattribute__(self, '__class__') is _LazyModule:
+                __class__ = loader_state['__class__']
+
+                # Reentrant calls from the same thread must be allowed to proceed without
+                # triggering the load again.
+                # exec_module() and self-referential imports are the primary ways this can
+                # happen, but in any case we must return something to avoid deadlock.
+                if loader_state['is_loading']:
+                    return __class__.__getattribute__(self, attr)
+                loader_state['is_loading'] = True
+
+                __dict__ = __class__.__getattribute__(self, '__dict__')
+
+                # All module metadata must be gathered from __spec__ in order to avoid
+                # using mutated values.
+                # Get the original name to make sure no object substitution occurred
+                # in sys.modules.
+                original_name = __spec__.name
+                # Figure out exactly what attributes were mutated between the creation
+                # of the module and now.
+                attrs_then = loader_state['__dict__']
+                attrs_now = __dict__
+                attrs_updated = {}
+                for key, value in attrs_now.items():
+                    # Code that set an attribute may have kept a reference to the
+                    # assigned object, making identity more important than equality.
+                    if key not in attrs_then:
+                        attrs_updated[key] = value
+                    elif id(attrs_now[key]) != id(attrs_then[key]):
+                        attrs_updated[key] = value
+                __spec__.loader.exec_module(self)
+                # If exec_module() was used directly there is no guarantee the module
+                # object was put into sys.modules.
+                if original_name in sys.modules:
+                    if id(self) != id(sys.modules[original_name]):
+                        raise ValueError(f"module object for {original_name!r} "
+                                          "substituted in sys.modules during a lazy "
+                                          "load")
+                # Update after loading since that's what would happen in an eager
+                # loading situation.
+                __dict__.update(attrs_updated)
+                # Finally, stop triggering this method, if the module did not
+                # already update its own __class__.
+                if isinstance(self, _LazyModule):
+                    object.__setattr__(self, '__class__', __class__)
+
+        return getattr(self, attr)
+
+    def __delattr__(self, attr):
+        """Trigger the load and then perform the deletion."""
+        # To trigger the load and raise an exception if the attribute
+        # doesn't exist.
+        self.__getattribute__(attr)
+        delattr(self, attr)
+
+
+class LazyLoader(Loader):
+
+    """A loader that creates a module which defers loading until attribute access."""
+
+    @staticmethod
+    def __check_eager_loader(loader):
+        if not hasattr(loader, 'exec_module'):
+            raise TypeError('loader must define exec_module()')
+
+    @classmethod
+    def factory(cls, loader):
+        """Construct a callable which returns the eager loader made lazy."""
+        cls.__check_eager_loader(loader)
+        return lambda *args, **kwargs: cls(loader(*args, **kwargs))
+
+    def __init__(self, loader):
+        self.__check_eager_loader(loader)
+        self.loader = loader
+
+    def create_module(self, spec):
+        return self.loader.create_module(spec)
+
+    def exec_module(self, module):
+        """Make the module load lazily."""
+        # Threading is only needed for lazy loading, and importlib.util can
+        # be pulled in at interpreter startup, so defer until needed.
+        import threading
+        module.__spec__.loader = self.loader
+        module.__loader__ = self.loader
+        # Don't need to worry about deep-copying as trying to set an attribute
+        # on an object would have triggered the load,
+        # e.g. ``module.__spec__.loader = None`` would trigger a load from
+        # trying to access module.__spec__.
+        loader_state = {}
+        loader_state['__dict__'] = module.__dict__.copy()
+        loader_state['__class__'] = module.__class__
+        loader_state['lock'] = threading.RLock()
+        loader_state['is_loading'] = False
+        module.__spec__.loader_state = loader_state
+        module.__class__ = _LazyModule
+
+
+__all__ = ['LazyLoader', 'Loader', 'MAGIC_NUMBER',
+           'cache_from_source', 'decode_source', 'find_spec',
+           'module_from_spec', 'resolve_name', 'source_from_cache',
+           'source_hash', 'spec_from_file_location', 'spec_from_loader']
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..9eaa4f3fbc16793adc061f9f5ee9dd0aab159b20
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__init__.py
@@ -0,0 +1,365 @@
+r"""JSON (JavaScript Object Notation) <https://json.org> is a subset of
+JavaScript syntax (ECMA-262 3rd edition) used as a lightweight data
+interchange format.
+
+:mod:`json` exposes an API familiar to users of the standard library
+:mod:`marshal` and :mod:`pickle` modules.  It is derived from a
+version of the externally maintained simplejson library.
+
+Encoding basic Python object hierarchies::
+
+    >>> import json
+    >>> json.dumps(['foo', {'bar': ('baz', None, 1.0, 2)}])
+    '["foo", {"bar": ["baz", null, 1.0, 2]}]'
+    >>> print(json.dumps("\"foo\bar"))
+    "\"foo\bar"
+    >>> print(json.dumps('\u1234'))
+    "\u1234"
+    >>> print(json.dumps('\\'))
+    "\\"
+    >>> print(json.dumps({"c": 0, "b": 0, "a": 0}, sort_keys=True))
+    {"a": 0, "b": 0, "c": 0}
+    >>> from io import StringIO
+    >>> io = StringIO()
+    >>> json.dump(['streaming API'], io)
+    >>> io.getvalue()
+    '["streaming API"]'
+
+Compact encoding::
+
+    >>> import json
+    >>> mydict = {'4': 5, '6': 7}
+    >>> json.dumps([1,2,3,mydict], separators=(',', ':'))
+    '[1,2,3,{"4":5,"6":7}]'
+
+Pretty printing::
+
+    >>> import json
+    >>> print(json.dumps({'4': 5, '6': 7}, sort_keys=True, indent=4))
+    {
+        "4": 5,
+        "6": 7
+    }
+
+Decoding JSON::
+
+    >>> import json
+    >>> obj = ['foo', {'bar': ['baz', None, 1.0, 2]}]
+    >>> json.loads('["foo", {"bar":["baz", null, 1.0, 2]}]') == obj
+    True
+    >>> json.loads('"\\"foo\\bar"') == '"foo\x08ar'
+    True
+    >>> from io import StringIO
+    >>> io = StringIO('["streaming API"]')
+    >>> json.load(io)[0] == 'streaming API'
+    True
+
+Specializing JSON object decoding::
+
+    >>> import json
+    >>> def as_complex(dct):
+    ...     if '__complex__' in dct:
+    ...         return complex(dct['real'], dct['imag'])
+    ...     return dct
+    ...
+    >>> json.loads('{"__complex__": true, "real": 1, "imag": 2}',
+    ...     object_hook=as_complex)
+    (1+2j)
+    >>> from decimal import Decimal
+    >>> json.loads('1.1', parse_float=Decimal) == Decimal('1.1')
+    True
+
+Specializing JSON object encoding::
+
+    >>> import json
+    >>> def encode_complex(obj):
+    ...     if isinstance(obj, complex):
+    ...         return [obj.real, obj.imag]
+    ...     raise TypeError(f'Object of type {obj.__class__.__name__} '
+    ...                     f'is not JSON serializable')
+    ...
+    >>> json.dumps(2 + 1j, default=encode_complex)
+    '[2.0, 1.0]'
+    >>> json.JSONEncoder(default=encode_complex).encode(2 + 1j)
+    '[2.0, 1.0]'
+    >>> ''.join(json.JSONEncoder(default=encode_complex).iterencode(2 + 1j))
+    '[2.0, 1.0]'
+
+
+Using json from the shell to validate and pretty-print::
+
+    $ echo '{"json":"obj"}' | python -m json
+    {
+        "json": "obj"
+    }
+    $ echo '{ 1.2:3.4}' | python -m json
+    Expecting property name enclosed in double quotes: line 1 column 3 (char 2)
+"""
+__version__ = '2.0.9'
+__all__ = [
+    'dump', 'dumps', 'load', 'loads',
+    'JSONDecoder', 'JSONDecodeError', 'JSONEncoder',
+]
+
+__author__ = 'Bob Ippolito <bob@redivi.com>'
+
+from .decoder import JSONDecoder, JSONDecodeError
+from .encoder import JSONEncoder
+import codecs
+
+_default_encoder = JSONEncoder(
+    skipkeys=False,
+    ensure_ascii=True,
+    check_circular=True,
+    allow_nan=True,
+    indent=None,
+    separators=None,
+    default=None,
+)
+
+def dump(obj, fp, *, skipkeys=False, ensure_ascii=True, check_circular=True,
+        allow_nan=True, cls=None, indent=None, separators=None,
+        default=None, sort_keys=False, **kw):
+    """Serialize ``obj`` as a JSON formatted stream to ``fp`` (a
+    ``.write()``-supporting file-like object).
+
+    If ``skipkeys`` is true then ``dict`` keys that are not basic types
+    (``str``, ``int``, ``float``, ``bool``, ``None``) will be skipped
+    instead of raising a ``TypeError``.
+
+    If ``ensure_ascii`` is false, then the strings written to ``fp`` can
+    contain non-ASCII and non-printable characters if they appear in strings
+    contained in ``obj``. Otherwise, all such characters are escaped in JSON
+    strings.
+
+    If ``check_circular`` is false, then the circular reference check
+    for container types will be skipped and a circular reference will
+    result in an ``RecursionError`` (or worse).
+
+    If ``allow_nan`` is false, then it will be a ``ValueError`` to
+    serialize out of range ``float`` values (``nan``, ``inf``, ``-inf``)
+    in strict compliance of the JSON specification, instead of using the
+    JavaScript equivalents (``NaN``, ``Infinity``, ``-Infinity``).
+
+    If ``indent`` is a non-negative integer, then JSON array elements and
+    object members will be pretty-printed with that indent level. An indent
+    level of 0 will only insert newlines. ``None`` is the most compact
+    representation.
+
+    If specified, ``separators`` should be an ``(item_separator,
+    key_separator)`` tuple.  The default is ``(', ', ': ')`` if *indent* is
+    ``None`` and ``(',', ': ')`` otherwise.  To get the most compact JSON
+    representation, you should specify ``(',', ':')`` to eliminate
+    whitespace.
+
+    ``default(obj)`` is a function that should return a serializable version
+    of obj or raise TypeError. The default simply raises TypeError.
+
+    If *sort_keys* is true (default: ``False``), then the output of
+    dictionaries will be sorted by key.
+
+    To use a custom ``JSONEncoder`` subclass (e.g. one that overrides the
+    ``.default()`` method to serialize additional types), specify it with
+    the ``cls`` kwarg; otherwise ``JSONEncoder`` is used.
+
+    """
+    # cached encoder
+    if (not skipkeys and ensure_ascii and
+        check_circular and allow_nan and
+        cls is None and indent is None and separators is None and
+        default is None and not sort_keys and not kw):
+        iterable = _default_encoder.iterencode(obj)
+    else:
+        if cls is None:
+            cls = JSONEncoder
+        iterable = cls(skipkeys=skipkeys, ensure_ascii=ensure_ascii,
+            check_circular=check_circular, allow_nan=allow_nan, indent=indent,
+            separators=separators,
+            default=default, sort_keys=sort_keys, **kw).iterencode(obj)
+    # could accelerate with writelines in some versions of Python, at
+    # a debuggability cost
+    for chunk in iterable:
+        fp.write(chunk)
+
+
+def dumps(obj, *, skipkeys=False, ensure_ascii=True, check_circular=True,
+        allow_nan=True, cls=None, indent=None, separators=None,
+        default=None, sort_keys=False, **kw):
+    """Serialize ``obj`` to a JSON formatted ``str``.
+
+    If ``skipkeys`` is true then ``dict`` keys that are not basic types
+    (``str``, ``int``, ``float``, ``bool``, ``None``) will be skipped
+    instead of raising a ``TypeError``.
+
+    If ``ensure_ascii`` is false, then the return value can contain
+    non-ASCII and non-printable characters if they appear in strings
+    contained in ``obj``.  Otherwise, all such characters are escaped in
+    JSON strings.
+
+    If ``check_circular`` is false, then the circular reference check
+    for container types will be skipped and a circular reference will
+    result in an ``RecursionError`` (or worse).
+
+    If ``allow_nan`` is false, then it will be a ``ValueError`` to
+    serialize out of range ``float`` values (``nan``, ``inf``, ``-inf``) in
+    strict compliance of the JSON specification, instead of using the
+    JavaScript equivalents (``NaN``, ``Infinity``, ``-Infinity``).
+
+    If ``indent`` is a non-negative integer, then JSON array elements and
+    object members will be pretty-printed with that indent level. An indent
+    level of 0 will only insert newlines. ``None`` is the most compact
+    representation.
+
+    If specified, ``separators`` should be an ``(item_separator,
+    key_separator)`` tuple.  The default is ``(', ', ': ')`` if *indent* is
+    ``None`` and ``(',', ': ')`` otherwise.  To get the most compact JSON
+    representation, you should specify ``(',', ':')`` to eliminate
+    whitespace.
+
+    ``default(obj)`` is a function that should return a serializable version
+    of obj or raise TypeError. The default simply raises TypeError.
+
+    If *sort_keys* is true (default: ``False``), then the output of
+    dictionaries will be sorted by key.
+
+    To use a custom ``JSONEncoder`` subclass (e.g. one that overrides the
+    ``.default()`` method to serialize additional types), specify it with
+    the ``cls`` kwarg; otherwise ``JSONEncoder`` is used.
+
+    """
+    # cached encoder
+    if (not skipkeys and ensure_ascii and
+        check_circular and allow_nan and
+        cls is None and indent is None and separators is None and
+        default is None and not sort_keys and not kw):
+        return _default_encoder.encode(obj)
+    if cls is None:
+        cls = JSONEncoder
+    return cls(
+        skipkeys=skipkeys, ensure_ascii=ensure_ascii,
+        check_circular=check_circular, allow_nan=allow_nan, indent=indent,
+        separators=separators, default=default, sort_keys=sort_keys,
+        **kw).encode(obj)
+
+
+_default_decoder = JSONDecoder(object_hook=None, object_pairs_hook=None)
+
+
+def detect_encoding(b):
+    bstartswith = b.startswith
+    if bstartswith((codecs.BOM_UTF32_BE, codecs.BOM_UTF32_LE)):
+        return 'utf-32'
+    if bstartswith((codecs.BOM_UTF16_BE, codecs.BOM_UTF16_LE)):
+        return 'utf-16'
+    if bstartswith(codecs.BOM_UTF8):
+        return 'utf-8-sig'
+
+    if len(b) >= 4:
+        if not b[0]:
+            # 00 00 -- -- - utf-32-be
+            # 00 XX -- -- - utf-16-be
+            return 'utf-16-be' if b[1] else 'utf-32-be'
+        if not b[1]:
+            # XX 00 00 00 - utf-32-le
+            # XX 00 00 XX - utf-16-le
+            # XX 00 XX -- - utf-16-le
+            return 'utf-16-le' if b[2] or b[3] else 'utf-32-le'
+    elif len(b) == 2:
+        if not b[0]:
+            # 00 XX - utf-16-be
+            return 'utf-16-be'
+        if not b[1]:
+            # XX 00 - utf-16-le
+            return 'utf-16-le'
+    # default
+    return 'utf-8'
+
+
+def load(fp, *, cls=None, object_hook=None, parse_float=None,
+        parse_int=None, parse_constant=None, object_pairs_hook=None, **kw):
+    """Deserialize ``fp`` (a ``.read()``-supporting file-like object containing
+    a JSON document) to a Python object.
+
+    ``object_hook`` is an optional function that will be called with the
+    result of any object literal decode (a ``dict``). The return value of
+    ``object_hook`` will be used instead of the ``dict``. This feature
+    can be used to implement custom decoders (e.g. JSON-RPC class hinting).
+
+    ``object_pairs_hook`` is an optional function that will be called with
+    the result of any object literal decoded with an ordered list of pairs.
+    The return value of ``object_pairs_hook`` will be used instead of the
+    ``dict``.  This feature can be used to implement custom decoders.  If
+    ``object_hook`` is also defined, the ``object_pairs_hook`` takes
+    priority.
+
+    To use a custom ``JSONDecoder`` subclass, specify it with the ``cls``
+    kwarg; otherwise ``JSONDecoder`` is used.
+    """
+    return loads(fp.read(),
+        cls=cls, object_hook=object_hook,
+        parse_float=parse_float, parse_int=parse_int,
+        parse_constant=parse_constant, object_pairs_hook=object_pairs_hook, **kw)
+
+
+def loads(s, *, cls=None, object_hook=None, parse_float=None,
+        parse_int=None, parse_constant=None, object_pairs_hook=None, **kw):
+    """Deserialize ``s`` (a ``str``, ``bytes`` or ``bytearray`` instance
+    containing a JSON document) to a Python object.
+
+    ``object_hook`` is an optional function that will be called with the
+    result of any object literal decode (a ``dict``). The return value of
+    ``object_hook`` will be used instead of the ``dict``. This feature
+    can be used to implement custom decoders (e.g. JSON-RPC class hinting).
+
+    ``object_pairs_hook`` is an optional function that will be called with
+    the result of any object literal decoded with an ordered list of pairs.
+    The return value of ``object_pairs_hook`` will be used instead of the
+    ``dict``.  This feature can be used to implement custom decoders.  If
+    ``object_hook`` is also defined, the ``object_pairs_hook`` takes
+    priority.
+
+    ``parse_float``, if specified, will be called with the string
+    of every JSON float to be decoded. By default this is equivalent to
+    float(num_str). This can be used to use another datatype or parser
+    for JSON floats (e.g. decimal.Decimal).
+
+    ``parse_int``, if specified, will be called with the string
+    of every JSON int to be decoded. By default this is equivalent to
+    int(num_str). This can be used to use another datatype or parser
+    for JSON integers (e.g. float).
+
+    ``parse_constant``, if specified, will be called with one of the
+    following strings: -Infinity, Infinity, NaN.
+    This can be used to raise an exception if invalid JSON numbers
+    are encountered.
+
+    To use a custom ``JSONDecoder`` subclass, specify it with the ``cls``
+    kwarg; otherwise ``JSONDecoder`` is used.
+    """
+    if isinstance(s, str):
+        if s.startswith('\ufeff'):
+            raise JSONDecodeError("Unexpected UTF-8 BOM (decode using utf-8-sig)",
+                                  s, 0)
+    else:
+        if not isinstance(s, (bytes, bytearray)):
+            raise TypeError(f'the JSON object must be str, bytes or bytearray, '
+                            f'not {s.__class__.__name__}')
+        s = s.decode(detect_encoding(s), 'surrogatepass')
+
+    if (cls is None and object_hook is None and
+            parse_int is None and parse_float is None and
+            parse_constant is None and object_pairs_hook is None and not kw):
+        return _default_decoder.decode(s)
+    if cls is None:
+        cls = JSONDecoder
+    if object_hook is not None:
+        kw['object_hook'] = object_hook
+    if object_pairs_hook is not None:
+        kw['object_pairs_hook'] = object_pairs_hook
+    if parse_float is not None:
+        kw['parse_float'] = parse_float
+    if parse_int is not None:
+        kw['parse_int'] = parse_int
+    if parse_constant is not None:
+        kw['parse_constant'] = parse_constant
+    return cls(**kw).decode(s)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..1808eaddb62776695309e7b2bfb64fb282aec01f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/__main__.py
@@ -0,0 +1,20 @@
+"""Command-line tool to validate and pretty-print JSON
+
+Usage::
+
+    $ echo '{"json":"obj"}' | python -m json
+    {
+        "json": "obj"
+    }
+    $ echo '{ 1.2:3.4}' | python -m json
+    Expecting property name enclosed in double quotes: line 1 column 3 (char 2)
+
+"""
+import json.tool
+
+
+if __name__ == '__main__':
+    try:
+        json.tool.main()
+    except BrokenPipeError as exc:
+        raise SystemExit(exc.errno)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/decoder.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/decoder.py
new file mode 100644
index 0000000000000000000000000000000000000000..92ad635255764098c0feb5aff1a3f4584d92fd90
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/decoder.py
@@ -0,0 +1,364 @@
+"""Implementation of JSONDecoder
+"""
+import re
+
+from json import scanner
+try:
+    from _json import scanstring as c_scanstring
+except ImportError:
+    c_scanstring = None
+
+__all__ = ['JSONDecoder', 'JSONDecodeError']
+
+FLAGS = re.VERBOSE | re.MULTILINE | re.DOTALL
+
+NaN = float('nan')
+PosInf = float('inf')
+NegInf = float('-inf')
+
+
+class JSONDecodeError(ValueError):
+    """Subclass of ValueError with the following additional properties:
+
+    msg: The unformatted error message
+    doc: The JSON document being parsed
+    pos: The start index of doc where parsing failed
+    lineno: The line corresponding to pos
+    colno: The column corresponding to pos
+
+    """
+    # Note that this exception is used from _json
+    def __init__(self, msg, doc, pos):
+        lineno = doc.count('\n', 0, pos) + 1
+        colno = pos - doc.rfind('\n', 0, pos)
+        errmsg = '%s: line %d column %d (char %d)' % (msg, lineno, colno, pos)
+        ValueError.__init__(self, errmsg)
+        self.msg = msg
+        self.doc = doc
+        self.pos = pos
+        self.lineno = lineno
+        self.colno = colno
+
+    def __reduce__(self):
+        return self.__class__, (self.msg, self.doc, self.pos)
+
+
+_CONSTANTS = {
+    '-Infinity': NegInf,
+    'Infinity': PosInf,
+    'NaN': NaN,
+}
+
+
+HEXDIGITS = re.compile(r'[0-9A-Fa-f]{4}', FLAGS)
+STRINGCHUNK = re.compile(r'(.*?)(["\\\x00-\x1f])', FLAGS)
+BACKSLASH = {
+    '"': '"', '\\': '\\', '/': '/',
+    'b': '\b', 'f': '\f', 'n': '\n', 'r': '\r', 't': '\t',
+}
+
+def _decode_uXXXX(s, pos, _m=HEXDIGITS.match):
+    esc = _m(s, pos + 1)
+    if esc is not None:
+        try:
+            return int(esc.group(), 16)
+        except ValueError:
+            pass
+    msg = "Invalid \\uXXXX escape"
+    raise JSONDecodeError(msg, s, pos)
+
+def py_scanstring(s, end, strict=True,
+        _b=BACKSLASH, _m=STRINGCHUNK.match):
+    """Scan the string s for a JSON string. End is the index of the
+    character in s after the quote that started the JSON string.
+    Unescapes all valid JSON string escape sequences and raises ValueError
+    on attempt to decode an invalid string. If strict is False then literal
+    control characters are allowed in the string.
+
+    Returns a tuple of the decoded string and the index of the character in s
+    after the end quote."""
+    chunks = []
+    _append = chunks.append
+    begin = end - 1
+    while 1:
+        chunk = _m(s, end)
+        if chunk is None:
+            raise JSONDecodeError("Unterminated string starting at", s, begin)
+        end = chunk.end()
+        content, terminator = chunk.groups()
+        # Content is contains zero or more unescaped string characters
+        if content:
+            _append(content)
+        # Terminator is the end of string, a literal control character,
+        # or a backslash denoting that an escape sequence follows
+        if terminator == '"':
+            break
+        elif terminator != '\\':
+            if strict:
+                #msg = "Invalid control character %r at" % (terminator,)
+                msg = "Invalid control character {0!r} at".format(terminator)
+                raise JSONDecodeError(msg, s, end)
+            else:
+                _append(terminator)
+                continue
+        try:
+            esc = s[end]
+        except IndexError:
+            raise JSONDecodeError("Unterminated string starting at",
+                                  s, begin) from None
+        # If not a unicode escape sequence, must be in the lookup table
+        if esc != 'u':
+            try:
+                char = _b[esc]
+            except KeyError:
+                msg = "Invalid \\escape: {0!r}".format(esc)
+                raise JSONDecodeError(msg, s, end)
+            end += 1
+        else:
+            uni = _decode_uXXXX(s, end)
+            end += 5
+            if 0xd800 <= uni <= 0xdbff and s[end:end + 2] == '\\u':
+                uni2 = _decode_uXXXX(s, end + 1)
+                if 0xdc00 <= uni2 <= 0xdfff:
+                    uni = 0x10000 + (((uni - 0xd800) << 10) | (uni2 - 0xdc00))
+                    end += 6
+            char = chr(uni)
+        _append(char)
+    return ''.join(chunks), end
+
+
+# Use speedup if available
+scanstring = c_scanstring or py_scanstring
+
+WHITESPACE = re.compile(r'[ \t\n\r]*', FLAGS)
+WHITESPACE_STR = ' \t\n\r'
+
+
+def JSONObject(s_and_end, strict, scan_once, object_hook, object_pairs_hook,
+               memo=None, _w=WHITESPACE.match, _ws=WHITESPACE_STR):
+    s, end = s_and_end
+    pairs = []
+    pairs_append = pairs.append
+    # Backwards compatibility
+    if memo is None:
+        memo = {}
+    memo_get = memo.setdefault
+    # Use a slice to prevent IndexError from being raised, the following
+    # check will raise a more specific ValueError if the string is empty
+    nextchar = s[end:end + 1]
+    # Normally we expect nextchar == '"'
+    if nextchar != '"':
+        if nextchar in _ws:
+            end = _w(s, end).end()
+            nextchar = s[end:end + 1]
+        # Trivial empty object
+        if nextchar == '}':
+            if object_pairs_hook is not None:
+                result = object_pairs_hook(pairs)
+                return result, end + 1
+            pairs = {}
+            if object_hook is not None:
+                pairs = object_hook(pairs)
+            return pairs, end + 1
+        elif nextchar != '"':
+            raise JSONDecodeError(
+                "Expecting property name enclosed in double quotes", s, end)
+    end += 1
+    while True:
+        key, end = scanstring(s, end, strict)
+        key = memo_get(key, key)
+        # To skip some function call overhead we optimize the fast paths where
+        # the JSON key separator is ": " or just ":".
+        if s[end:end + 1] != ':':
+            end = _w(s, end).end()
+            if s[end:end + 1] != ':':
+                raise JSONDecodeError("Expecting ':' delimiter", s, end)
+        end += 1
+
+        try:
+            if s[end] in _ws:
+                end += 1
+                if s[end] in _ws:
+                    end = _w(s, end + 1).end()
+        except IndexError:
+            pass
+
+        try:
+            value, end = scan_once(s, end)
+        except StopIteration as err:
+            raise JSONDecodeError("Expecting value", s, err.value) from None
+        pairs_append((key, value))
+        try:
+            nextchar = s[end]
+            if nextchar in _ws:
+                end = _w(s, end + 1).end()
+                nextchar = s[end]
+        except IndexError:
+            nextchar = ''
+        end += 1
+
+        if nextchar == '}':
+            break
+        elif nextchar != ',':
+            raise JSONDecodeError("Expecting ',' delimiter", s, end - 1)
+        comma_idx = end - 1
+        end = _w(s, end).end()
+        nextchar = s[end:end + 1]
+        end += 1
+        if nextchar != '"':
+            if nextchar == '}':
+                raise JSONDecodeError("Illegal trailing comma before end of object", s, comma_idx)
+            raise JSONDecodeError(
+                "Expecting property name enclosed in double quotes", s, end - 1)
+    if object_pairs_hook is not None:
+        result = object_pairs_hook(pairs)
+        return result, end
+    pairs = dict(pairs)
+    if object_hook is not None:
+        pairs = object_hook(pairs)
+    return pairs, end
+
+def JSONArray(s_and_end, scan_once, _w=WHITESPACE.match, _ws=WHITESPACE_STR):
+    s, end = s_and_end
+    values = []
+    nextchar = s[end:end + 1]
+    if nextchar in _ws:
+        end = _w(s, end + 1).end()
+        nextchar = s[end:end + 1]
+    # Look-ahead for trivial empty array
+    if nextchar == ']':
+        return values, end + 1
+    _append = values.append
+    while True:
+        try:
+            value, end = scan_once(s, end)
+        except StopIteration as err:
+            raise JSONDecodeError("Expecting value", s, err.value) from None
+        _append(value)
+        nextchar = s[end:end + 1]
+        if nextchar in _ws:
+            end = _w(s, end + 1).end()
+            nextchar = s[end:end + 1]
+        end += 1
+        if nextchar == ']':
+            break
+        elif nextchar != ',':
+            raise JSONDecodeError("Expecting ',' delimiter", s, end - 1)
+        comma_idx = end - 1
+        try:
+            if s[end] in _ws:
+                end += 1
+                if s[end] in _ws:
+                    end = _w(s, end + 1).end()
+            nextchar = s[end:end + 1]
+        except IndexError:
+            pass
+        if nextchar == ']':
+            raise JSONDecodeError("Illegal trailing comma before end of array", s, comma_idx)
+
+    return values, end
+
+
+class JSONDecoder(object):
+    """Simple JSON <https://json.org> decoder
+
+    Performs the following translations in decoding by default:
+
+    +---------------+-------------------+
+    | JSON          | Python            |
+    +===============+===================+
+    | object        | dict              |
+    +---------------+-------------------+
+    | array         | list              |
+    +---------------+-------------------+
+    | string        | str               |
+    +---------------+-------------------+
+    | number (int)  | int               |
+    +---------------+-------------------+
+    | number (real) | float             |
+    +---------------+-------------------+
+    | true          | True              |
+    +---------------+-------------------+
+    | false         | False             |
+    +---------------+-------------------+
+    | null          | None              |
+    +---------------+-------------------+
+
+    It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as
+    their corresponding ``float`` values, which is outside the JSON spec.
+
+    """
+
+    def __init__(self, *, object_hook=None, parse_float=None,
+            parse_int=None, parse_constant=None, strict=True,
+            object_pairs_hook=None):
+        """``object_hook``, if specified, will be called with the result
+        of every JSON object decoded and its return value will be used in
+        place of the given ``dict``.  This can be used to provide custom
+        deserializations (e.g. to support JSON-RPC class hinting).
+
+        ``object_pairs_hook``, if specified will be called with the result
+        of every JSON object decoded with an ordered list of pairs.  The
+        return value of ``object_pairs_hook`` will be used instead of the
+        ``dict``.  This feature can be used to implement custom decoders.
+        If ``object_hook`` is also defined, the ``object_pairs_hook`` takes
+        priority.
+
+        ``parse_float``, if specified, will be called with the string
+        of every JSON float to be decoded. By default this is equivalent to
+        float(num_str). This can be used to use another datatype or parser
+        for JSON floats (e.g. decimal.Decimal).
+
+        ``parse_int``, if specified, will be called with the string
+        of every JSON int to be decoded. By default this is equivalent to
+        int(num_str). This can be used to use another datatype or parser
+        for JSON integers (e.g. float).
+
+        ``parse_constant``, if specified, will be called with one of the
+        following strings: -Infinity, Infinity, NaN.
+        This can be used to raise an exception if invalid JSON numbers
+        are encountered.
+
+        If ``strict`` is false (true is the default), then control
+        characters will be allowed inside strings.  Control characters in
+        this context are those with character codes in the 0-31 range,
+        including ``'\\t'`` (tab), ``'\\n'``, ``'\\r'`` and ``'\\0'``.
+        """
+        self.object_hook = object_hook
+        self.parse_float = parse_float or float
+        self.parse_int = parse_int or int
+        self.parse_constant = parse_constant or _CONSTANTS.__getitem__
+        self.strict = strict
+        self.object_pairs_hook = object_pairs_hook
+        self.parse_object = JSONObject
+        self.parse_array = JSONArray
+        self.parse_string = scanstring
+        self.memo = {}
+        self.scan_once = scanner.make_scanner(self)
+
+
+    def decode(self, s, _w=WHITESPACE.match):
+        """Return the Python representation of ``s`` (a ``str`` instance
+        containing a JSON document).
+
+        """
+        obj, end = self.raw_decode(s, idx=_w(s, 0).end())
+        end = _w(s, end).end()
+        if end != len(s):
+            raise JSONDecodeError("Extra data", s, end)
+        return obj
+
+    def raw_decode(self, s, idx=0):
+        """Decode a JSON document from ``s`` (a ``str`` beginning with
+        a JSON document) and return a 2-tuple of the Python
+        representation and the index in ``s`` where the document ended.
+
+        This can be used to decode a JSON document from a string that may
+        have extraneous data at the end.
+
+        """
+        try:
+            obj, end = self.scan_once(s, idx)
+        except StopIteration as err:
+            raise JSONDecodeError("Expecting value", s, err.value) from None
+        return obj, end
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/encoder.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/encoder.py
new file mode 100644
index 0000000000000000000000000000000000000000..5cf6d64f3eade60b65f1324ae394454e97883c45
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/encoder.py
@@ -0,0 +1,461 @@
+"""Implementation of JSONEncoder
+"""
+import re
+
+try:
+    from _json import encode_basestring_ascii as c_encode_basestring_ascii
+except ImportError:
+    c_encode_basestring_ascii = None
+try:
+    from _json import encode_basestring as c_encode_basestring
+except ImportError:
+    c_encode_basestring = None
+try:
+    from _json import make_encoder as c_make_encoder
+except ImportError:
+    c_make_encoder = None
+
+ESCAPE = re.compile(r'[\x00-\x1f\\"\b\f\n\r\t]')
+ESCAPE_ASCII = re.compile(r'([\\"]|[^\ -~])')
+HAS_UTF8 = re.compile(b'[\x80-\xff]')
+ESCAPE_DCT = {
+    '\\': '\\\\',
+    '"': '\\"',
+    '\b': '\\b',
+    '\f': '\\f',
+    '\n': '\\n',
+    '\r': '\\r',
+    '\t': '\\t',
+}
+for i in range(0x20):
+    ESCAPE_DCT.setdefault(chr(i), '\\u{0:04x}'.format(i))
+    #ESCAPE_DCT.setdefault(chr(i), '\\u%04x' % (i,))
+del i
+
+INFINITY = float('inf')
+
+def py_encode_basestring(s):
+    """Return a JSON representation of a Python string
+
+    """
+    def replace(match):
+        return ESCAPE_DCT[match.group(0)]
+    return '"' + ESCAPE.sub(replace, s) + '"'
+
+
+encode_basestring = (c_encode_basestring or py_encode_basestring)
+
+
+def py_encode_basestring_ascii(s):
+    """Return an ASCII-only JSON representation of a Python string
+
+    """
+    def replace(match):
+        s = match.group(0)
+        try:
+            return ESCAPE_DCT[s]
+        except KeyError:
+            n = ord(s)
+            if n < 0x10000:
+                return '\\u{0:04x}'.format(n)
+                #return '\\u%04x' % (n,)
+            else:
+                # surrogate pair
+                n -= 0x10000
+                s1 = 0xd800 | ((n >> 10) & 0x3ff)
+                s2 = 0xdc00 | (n & 0x3ff)
+                return '\\u{0:04x}\\u{1:04x}'.format(s1, s2)
+    return '"' + ESCAPE_ASCII.sub(replace, s) + '"'
+
+
+encode_basestring_ascii = (
+    c_encode_basestring_ascii or py_encode_basestring_ascii)
+
+class JSONEncoder(object):
+    """Extensible JSON <https://json.org> encoder for Python data structures.
+
+    Supports the following objects and types by default:
+
+    +-------------------+---------------+
+    | Python            | JSON          |
+    +===================+===============+
+    | dict              | object        |
+    +-------------------+---------------+
+    | list, tuple       | array         |
+    +-------------------+---------------+
+    | str               | string        |
+    +-------------------+---------------+
+    | int, float        | number        |
+    +-------------------+---------------+
+    | True              | true          |
+    +-------------------+---------------+
+    | False             | false         |
+    +-------------------+---------------+
+    | None              | null          |
+    +-------------------+---------------+
+
+    To extend this to recognize other objects, subclass and implement a
+    ``.default()`` method with another method that returns a serializable
+    object for ``o`` if possible, otherwise it should call the superclass
+    implementation (to raise ``TypeError``).
+
+    """
+    item_separator = ', '
+    key_separator = ': '
+    def __init__(self, *, skipkeys=False, ensure_ascii=True,
+            check_circular=True, allow_nan=True, sort_keys=False,
+            indent=None, separators=None, default=None):
+        """Constructor for JSONEncoder, with sensible defaults.
+
+        If skipkeys is false, then it is a TypeError to attempt
+        encoding of keys that are not str, int, float, bool or None.
+        If skipkeys is True, such items are simply skipped.
+
+        If ensure_ascii is true, the output is guaranteed to be str objects
+        with all incoming non-ASCII and non-printable characters escaped.
+        If ensure_ascii is false, the output can contain non-ASCII and
+        non-printable characters.
+
+        If check_circular is true, then lists, dicts, and custom encoded
+        objects will be checked for circular references during encoding to
+        prevent an infinite recursion (which would cause an RecursionError).
+        Otherwise, no such check takes place.
+
+        If allow_nan is true, then NaN, Infinity, and -Infinity will be
+        encoded as such.  This behavior is not JSON specification compliant,
+        but is consistent with most JavaScript based encoders and decoders.
+        Otherwise, it will be a ValueError to encode such floats.
+
+        If sort_keys is true, then the output of dictionaries will be
+        sorted by key; this is useful for regression tests to ensure
+        that JSON serializations can be compared on a day-to-day basis.
+
+        If indent is a non-negative integer, then JSON array
+        elements and object members will be pretty-printed with that
+        indent level.  An indent level of 0 will only insert newlines.
+        None is the most compact representation.
+
+        If specified, separators should be an (item_separator,
+        key_separator) tuple.  The default is (', ', ': ') if *indent* is
+        ``None`` and (',', ': ') otherwise.  To get the most compact JSON
+        representation, you should specify (',', ':') to eliminate
+        whitespace.
+
+        If specified, default is a function that gets called for objects
+        that can't otherwise be serialized.  It should return a JSON
+        encodable version of the object or raise a ``TypeError``.
+
+        """
+
+        self.skipkeys = skipkeys
+        self.ensure_ascii = ensure_ascii
+        self.check_circular = check_circular
+        self.allow_nan = allow_nan
+        self.sort_keys = sort_keys
+        self.indent = indent
+        if separators is not None:
+            self.item_separator, self.key_separator = separators
+        elif indent is not None:
+            self.item_separator = ','
+        if default is not None:
+            self.default = default
+
+    def default(self, o):
+        """Implement this method in a subclass such that it returns
+        a serializable object for ``o``, or calls the base implementation
+        (to raise a ``TypeError``).
+
+        For example, to support arbitrary iterators, you could
+        implement default like this::
+
+            def default(self, o):
+                try:
+                    iterable = iter(o)
+                except TypeError:
+                    pass
+                else:
+                    return list(iterable)
+                # Let the base class default method raise the TypeError
+                return super().default(o)
+
+        """
+        raise TypeError(f'Object of type {o.__class__.__name__} '
+                        f'is not JSON serializable')
+
+    def encode(self, o):
+        """Return a JSON string representation of a Python data structure.
+
+        >>> from json.encoder import JSONEncoder
+        >>> JSONEncoder().encode({"foo": ["bar", "baz"]})
+        '{"foo": ["bar", "baz"]}'
+
+        """
+        # This is for extremely simple cases and benchmarks.
+        if isinstance(o, str):
+            if self.ensure_ascii:
+                return encode_basestring_ascii(o)
+            else:
+                return encode_basestring(o)
+        # This doesn't pass the iterator directly to ''.join() because the
+        # exceptions aren't as detailed.  The list call should be roughly
+        # equivalent to the PySequence_Fast that ''.join() would do.
+        chunks = self.iterencode(o, _one_shot=True)
+        if not isinstance(chunks, (list, tuple)):
+            chunks = list(chunks)
+        return ''.join(chunks)
+
+    def iterencode(self, o, _one_shot=False):
+        """Encode the given object and yield each string
+        representation as available.
+
+        For example::
+
+            for chunk in JSONEncoder().iterencode(bigobject):
+                mysocket.write(chunk)
+
+        """
+        if self.check_circular:
+            markers = {}
+        else:
+            markers = None
+        if self.ensure_ascii:
+            _encoder = encode_basestring_ascii
+        else:
+            _encoder = encode_basestring
+
+        def floatstr(o, allow_nan=self.allow_nan,
+                _repr=float.__repr__, _inf=INFINITY, _neginf=-INFINITY):
+            # Check for specials.  Note that this type of test is processor
+            # and/or platform-specific, so do tests which don't depend on the
+            # internals.
+
+            if o != o:
+                text = 'NaN'
+            elif o == _inf:
+                text = 'Infinity'
+            elif o == _neginf:
+                text = '-Infinity'
+            else:
+                return _repr(o)
+
+            if not allow_nan:
+                raise ValueError(
+                    "Out of range float values are not JSON compliant: " +
+                    repr(o))
+
+            return text
+
+
+        if self.indent is None or isinstance(self.indent, str):
+            indent = self.indent
+        else:
+            indent = ' ' * self.indent
+        if _one_shot and c_make_encoder is not None:
+            _iterencode = c_make_encoder(
+                markers, self.default, _encoder, indent,
+                self.key_separator, self.item_separator, self.sort_keys,
+                self.skipkeys, self.allow_nan)
+        else:
+            _iterencode = _make_iterencode(
+                markers, self.default, _encoder, indent, floatstr,
+                self.key_separator, self.item_separator, self.sort_keys,
+                self.skipkeys, _one_shot)
+        return _iterencode(o, 0)
+
+def _make_iterencode(markers, _default, _encoder, _indent, _floatstr,
+        _key_separator, _item_separator, _sort_keys, _skipkeys, _one_shot,
+        ## HACK: hand-optimized bytecode; turn globals into locals
+        ValueError=ValueError,
+        dict=dict,
+        float=float,
+        id=id,
+        int=int,
+        isinstance=isinstance,
+        list=list,
+        str=str,
+        tuple=tuple,
+        _intstr=int.__repr__,
+    ):
+
+    def _iterencode_list(lst, _current_indent_level):
+        if not lst:
+            yield '[]'
+            return
+        if markers is not None:
+            markerid = id(lst)
+            if markerid in markers:
+                raise ValueError("Circular reference detected")
+            markers[markerid] = lst
+        buf = '['
+        if _indent is not None:
+            _current_indent_level += 1
+            newline_indent = '\n' + _indent * _current_indent_level
+            separator = _item_separator + newline_indent
+            buf += newline_indent
+        else:
+            newline_indent = None
+            separator = _item_separator
+        for i, value in enumerate(lst):
+            if i:
+                buf = separator
+            try:
+                if isinstance(value, str):
+                    yield buf + _encoder(value)
+                elif value is None:
+                    yield buf + 'null'
+                elif value is True:
+                    yield buf + 'true'
+                elif value is False:
+                    yield buf + 'false'
+                elif isinstance(value, int):
+                    # Subclasses of int/float may override __repr__, but we still
+                    # want to encode them as integers/floats in JSON. One example
+                    # within the standard library is IntEnum.
+                    yield buf + _intstr(value)
+                elif isinstance(value, float):
+                    # see comment above for int
+                    yield buf + _floatstr(value)
+                else:
+                    yield buf
+                    if isinstance(value, (list, tuple)):
+                        chunks = _iterencode_list(value, _current_indent_level)
+                    elif isinstance(value, dict):
+                        chunks = _iterencode_dict(value, _current_indent_level)
+                    else:
+                        chunks = _iterencode(value, _current_indent_level)
+                    yield from chunks
+            except GeneratorExit:
+                raise
+            except BaseException as exc:
+                exc.add_note(f'when serializing {type(lst).__name__} item {i}')
+                raise
+        if newline_indent is not None:
+            _current_indent_level -= 1
+            yield '\n' + _indent * _current_indent_level
+        yield ']'
+        if markers is not None:
+            del markers[markerid]
+
+    def _iterencode_dict(dct, _current_indent_level):
+        if not dct:
+            yield '{}'
+            return
+        if markers is not None:
+            markerid = id(dct)
+            if markerid in markers:
+                raise ValueError("Circular reference detected")
+            markers[markerid] = dct
+        yield '{'
+        if _indent is not None:
+            _current_indent_level += 1
+            newline_indent = '\n' + _indent * _current_indent_level
+            item_separator = _item_separator + newline_indent
+        else:
+            newline_indent = None
+            item_separator = _item_separator
+        first = True
+        if _sort_keys:
+            items = sorted(dct.items())
+        else:
+            items = dct.items()
+        for key, value in items:
+            if isinstance(key, str):
+                pass
+            # JavaScript is weakly typed for these, so it makes sense to
+            # also allow them.  Many encoders seem to do something like this.
+            elif isinstance(key, float):
+                # see comment for int/float in _make_iterencode
+                key = _floatstr(key)
+            elif key is True:
+                key = 'true'
+            elif key is False:
+                key = 'false'
+            elif key is None:
+                key = 'null'
+            elif isinstance(key, int):
+                # see comment for int/float in _make_iterencode
+                key = _intstr(key)
+            elif _skipkeys:
+                continue
+            else:
+                raise TypeError(f'keys must be str, int, float, bool or None, '
+                                f'not {key.__class__.__name__}')
+            if first:
+                first = False
+                if newline_indent is not None:
+                    yield newline_indent
+            else:
+                yield item_separator
+            yield _encoder(key)
+            yield _key_separator
+            try:
+                if isinstance(value, str):
+                    yield _encoder(value)
+                elif value is None:
+                    yield 'null'
+                elif value is True:
+                    yield 'true'
+                elif value is False:
+                    yield 'false'
+                elif isinstance(value, int):
+                    # see comment for int/float in _make_iterencode
+                    yield _intstr(value)
+                elif isinstance(value, float):
+                    # see comment for int/float in _make_iterencode
+                    yield _floatstr(value)
+                else:
+                    if isinstance(value, (list, tuple)):
+                        chunks = _iterencode_list(value, _current_indent_level)
+                    elif isinstance(value, dict):
+                        chunks = _iterencode_dict(value, _current_indent_level)
+                    else:
+                        chunks = _iterencode(value, _current_indent_level)
+                    yield from chunks
+            except GeneratorExit:
+                raise
+            except BaseException as exc:
+                exc.add_note(f'when serializing {type(dct).__name__} item {key!r}')
+                raise
+        if not first and newline_indent is not None:
+            _current_indent_level -= 1
+            yield '\n' + _indent * _current_indent_level
+        yield '}'
+        if markers is not None:
+            del markers[markerid]
+
+    def _iterencode(o, _current_indent_level):
+        if isinstance(o, str):
+            yield _encoder(o)
+        elif o is None:
+            yield 'null'
+        elif o is True:
+            yield 'true'
+        elif o is False:
+            yield 'false'
+        elif isinstance(o, int):
+            # see comment for int/float in _make_iterencode
+            yield _intstr(o)
+        elif isinstance(o, float):
+            # see comment for int/float in _make_iterencode
+            yield _floatstr(o)
+        elif isinstance(o, (list, tuple)):
+            yield from _iterencode_list(o, _current_indent_level)
+        elif isinstance(o, dict):
+            yield from _iterencode_dict(o, _current_indent_level)
+        else:
+            if markers is not None:
+                markerid = id(o)
+                if markerid in markers:
+                    raise ValueError("Circular reference detected")
+                markers[markerid] = o
+            newobj = _default(o)
+            try:
+                yield from _iterencode(newobj, _current_indent_level)
+            except GeneratorExit:
+                raise
+            except BaseException as exc:
+                exc.add_note(f'when serializing {type(o).__name__} object')
+                raise
+            if markers is not None:
+                del markers[markerid]
+    return _iterencode
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/scanner.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/scanner.py
new file mode 100644
index 0000000000000000000000000000000000000000..090897515fe2f3818767a6dcf7b2310dca2c850a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/scanner.py
@@ -0,0 +1,73 @@
+"""JSON token scanner
+"""
+import re
+try:
+    from _json import make_scanner as c_make_scanner
+except ImportError:
+    c_make_scanner = None
+
+__all__ = ['make_scanner']
+
+NUMBER_RE = re.compile(
+    r'(-?(?:0|[1-9][0-9]*))(\.[0-9]+)?([eE][-+]?[0-9]+)?',
+    (re.VERBOSE | re.MULTILINE | re.DOTALL))
+
+def py_make_scanner(context):
+    parse_object = context.parse_object
+    parse_array = context.parse_array
+    parse_string = context.parse_string
+    match_number = NUMBER_RE.match
+    strict = context.strict
+    parse_float = context.parse_float
+    parse_int = context.parse_int
+    parse_constant = context.parse_constant
+    object_hook = context.object_hook
+    object_pairs_hook = context.object_pairs_hook
+    memo = context.memo
+
+    def _scan_once(string, idx):
+        try:
+            nextchar = string[idx]
+        except IndexError:
+            raise StopIteration(idx) from None
+
+        if nextchar == '"':
+            return parse_string(string, idx + 1, strict)
+        elif nextchar == '{':
+            return parse_object((string, idx + 1), strict,
+                _scan_once, object_hook, object_pairs_hook, memo)
+        elif nextchar == '[':
+            return parse_array((string, idx + 1), _scan_once)
+        elif nextchar == 'n' and string[idx:idx + 4] == 'null':
+            return None, idx + 4
+        elif nextchar == 't' and string[idx:idx + 4] == 'true':
+            return True, idx + 4
+        elif nextchar == 'f' and string[idx:idx + 5] == 'false':
+            return False, idx + 5
+
+        m = match_number(string, idx)
+        if m is not None:
+            integer, frac, exp = m.groups()
+            if frac or exp:
+                res = parse_float(integer + (frac or '') + (exp or ''))
+            else:
+                res = parse_int(integer)
+            return res, m.end()
+        elif nextchar == 'N' and string[idx:idx + 3] == 'NaN':
+            return parse_constant('NaN'), idx + 3
+        elif nextchar == 'I' and string[idx:idx + 8] == 'Infinity':
+            return parse_constant('Infinity'), idx + 8
+        elif nextchar == '-' and string[idx:idx + 9] == '-Infinity':
+            return parse_constant('-Infinity'), idx + 9
+        else:
+            raise StopIteration(idx)
+
+    def scan_once(string, idx):
+        try:
+            return _scan_once(string, idx)
+        finally:
+            memo.clear()
+
+    return scan_once
+
+make_scanner = c_make_scanner or py_make_scanner
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/tool.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/tool.py
new file mode 100644
index 0000000000000000000000000000000000000000..1967817add8abcecdc7f990cf3834af03ec62063
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/json/tool.py
@@ -0,0 +1,121 @@
+"""Command-line tool to validate and pretty-print JSON
+
+See `json.__main__` for a usage example (invocation as
+`python -m json.tool` is supported for backwards compatibility).
+"""
+import argparse
+import json
+import re
+import sys
+from _colorize import get_theme, can_colorize
+
+
+# The string we are colorizing is valid JSON,
+# so we can use a looser but simpler regex to match
+# the various parts, most notably strings and numbers,
+# where the regex given by the spec is much more complex.
+_color_pattern = re.compile(r'''
+    (?P<key>"(\\.|[^"\\])*")(?=:)           |
+    (?P<string>"(\\.|[^"\\])*")             |
+    (?P<number>NaN|-?Infinity|[0-9\-+.Ee]+) |
+    (?P<boolean>true|false)                 |
+    (?P<null>null)
+''', re.VERBOSE)
+
+_group_to_theme_color = {
+    "key": "definition",
+    "string": "string",
+    "number": "number",
+    "boolean": "keyword",
+    "null": "keyword",
+}
+
+
+def _colorize_json(json_str, theme):
+    def _replace_match_callback(match):
+        for group, color in _group_to_theme_color.items():
+            if m := match.group(group):
+                return f"{theme[color]}{m}{theme.reset}"
+        return match.group()
+
+    return re.sub(_color_pattern, _replace_match_callback, json_str)
+
+
+def main():
+    description = ('A simple command line interface for json module '
+                   'to validate and pretty-print JSON objects.')
+    parser = argparse.ArgumentParser(description=description, color=True)
+    parser.add_argument('infile', nargs='?',
+                        help='a JSON file to be validated or pretty-printed',
+                        default='-')
+    parser.add_argument('outfile', nargs='?',
+                        help='write the output of infile to outfile',
+                        default=None)
+    parser.add_argument('--sort-keys', action='store_true', default=False,
+                        help='sort the output of dictionaries alphabetically by key')
+    parser.add_argument('--no-ensure-ascii', dest='ensure_ascii', action='store_false',
+                        help='disable escaping of non-ASCII characters')
+    parser.add_argument('--json-lines', action='store_true', default=False,
+                        help='parse input using the JSON Lines format. '
+                        'Use with --no-indent or --compact to produce valid JSON Lines output.')
+    group = parser.add_mutually_exclusive_group()
+    group.add_argument('--indent', default=4, type=int,
+                       help='separate items with newlines and use this number '
+                       'of spaces for indentation')
+    group.add_argument('--tab', action='store_const', dest='indent',
+                       const='\t', help='separate items with newlines and use '
+                       'tabs for indentation')
+    group.add_argument('--no-indent', action='store_const', dest='indent',
+                       const=None,
+                       help='separate items with spaces rather than newlines')
+    group.add_argument('--compact', action='store_true',
+                       help='suppress all whitespace separation (most compact)')
+    options = parser.parse_args()
+
+    dump_args = {
+        'sort_keys': options.sort_keys,
+        'indent': options.indent,
+        'ensure_ascii': options.ensure_ascii,
+    }
+    if options.compact:
+        dump_args['indent'] = None
+        dump_args['separators'] = ',', ':'
+
+    try:
+        if options.infile == '-':
+            infile = sys.stdin
+        else:
+            infile = open(options.infile, encoding='utf-8')
+        try:
+            if options.json_lines:
+                objs = (json.loads(line) for line in infile)
+            else:
+                objs = (json.load(infile),)
+        finally:
+            if infile is not sys.stdin:
+                infile.close()
+
+        if options.outfile is None:
+            outfile = sys.stdout
+        else:
+            outfile = open(options.outfile, 'w', encoding='utf-8')
+        with outfile:
+            if can_colorize(file=outfile):
+                t = get_theme(tty_file=outfile).syntax
+                for obj in objs:
+                    json_str = json.dumps(obj, **dump_args)
+                    outfile.write(_colorize_json(json_str, t))
+                    outfile.write('\n')
+            else:
+                for obj in objs:
+                    json.dump(obj, outfile, **dump_args)
+                    outfile.write('\n')
+    except ValueError as e:
+        raise SystemExit(e)
+
+
+if __name__ == '__main__':
+    try:
+        main()
+    except BrokenPipeError as exc:
+        raise SystemExit(exc.errno)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..9005f1ef865c9096e6035feb7a53a98f8dade705
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/__init__.py
@@ -0,0 +1,2326 @@
+# Copyright 2001-2022 by Vinay Sajip. All Rights Reserved.
+#
+# Permission to use, copy, modify, and distribute this software and its
+# documentation for any purpose and without fee is hereby granted,
+# provided that the above copyright notice appear in all copies and that
+# both that copyright notice and this permission notice appear in
+# supporting documentation, and that the name of Vinay Sajip
+# not be used in advertising or publicity pertaining to distribution
+# of the software without specific, written prior permission.
+# VINAY SAJIP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# VINAY SAJIP BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+# ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
+# IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""
+Logging package for Python. Based on PEP 282 and comments thereto in
+comp.lang.python.
+
+Copyright (C) 2001-2022 Vinay Sajip. All Rights Reserved.
+
+To use, simply 'import logging' and log away!
+"""
+
+import sys, os, time, io, re, traceback, warnings, weakref, collections.abc
+
+from types import GenericAlias
+from string import Template
+from string import Formatter as StrFormatter
+
+
+__all__ = ['BASIC_FORMAT', 'BufferingFormatter', 'CRITICAL', 'DEBUG', 'ERROR',
+           'FATAL', 'FileHandler', 'Filter', 'Formatter', 'Handler', 'INFO',
+           'LogRecord', 'Logger', 'LoggerAdapter', 'NOTSET', 'NullHandler',
+           'StreamHandler', 'WARN', 'WARNING', 'addLevelName', 'basicConfig',
+           'captureWarnings', 'critical', 'debug', 'disable', 'error',
+           'exception', 'fatal', 'getLevelName', 'getLogger', 'getLoggerClass',
+           'info', 'log', 'makeLogRecord', 'setLoggerClass', 'shutdown',
+           'warn', 'warning', 'getLogRecordFactory', 'setLogRecordFactory',
+           'lastResort', 'raiseExceptions', 'getLevelNamesMapping',
+           'getHandlerByName', 'getHandlerNames']
+
+import threading
+
+__author__  = "Vinay Sajip <vinay_sajip@red-dove.com>"
+__status__  = "production"
+# The following module attributes are no longer updated.
+__version__ = "0.5.1.2"
+__date__    = "07 February 2010"
+
+#---------------------------------------------------------------------------
+#   Miscellaneous module data
+#---------------------------------------------------------------------------
+
+#
+#_startTime is used as the base when calculating the relative time of events
+#
+_startTime = time.time_ns()
+
+#
+#raiseExceptions is used to see if exceptions during handling should be
+#propagated
+#
+raiseExceptions = True
+
+#
+# If you don't want threading information in the log, set this to False
+#
+logThreads = True
+
+#
+# If you don't want multiprocessing information in the log, set this to False
+#
+logMultiprocessing = True
+
+#
+# If you don't want process information in the log, set this to False
+#
+logProcesses = True
+
+#
+# If you don't want asyncio task information in the log, set this to False
+#
+logAsyncioTasks = True
+
+#---------------------------------------------------------------------------
+#   Level related stuff
+#---------------------------------------------------------------------------
+#
+# Default levels and level names, these can be replaced with any positive set
+# of values having corresponding names. There is a pseudo-level, NOTSET, which
+# is only really there as a lower limit for user-defined levels. Handlers and
+# loggers are initialized with NOTSET so that they will log all messages, even
+# at user-defined levels.
+#
+
+CRITICAL = 50
+FATAL = CRITICAL
+ERROR = 40
+WARNING = 30
+WARN = WARNING
+INFO = 20
+DEBUG = 10
+NOTSET = 0
+
+_levelToName = {
+    CRITICAL: 'CRITICAL',
+    ERROR: 'ERROR',
+    WARNING: 'WARNING',
+    INFO: 'INFO',
+    DEBUG: 'DEBUG',
+    NOTSET: 'NOTSET',
+}
+_nameToLevel = {
+    'CRITICAL': CRITICAL,
+    'FATAL': FATAL,
+    'ERROR': ERROR,
+    'WARN': WARNING,
+    'WARNING': WARNING,
+    'INFO': INFO,
+    'DEBUG': DEBUG,
+    'NOTSET': NOTSET,
+}
+
+def getLevelNamesMapping():
+    return _nameToLevel.copy()
+
+def getLevelName(level):
+    """
+    Return the textual or numeric representation of logging level 'level'.
+
+    If the level is one of the predefined levels (CRITICAL, ERROR, WARNING,
+    INFO, DEBUG) then you get the corresponding string. If you have
+    associated levels with names using addLevelName then the name you have
+    associated with 'level' is returned.
+
+    If a numeric value corresponding to one of the defined levels is passed
+    in, the corresponding string representation is returned.
+
+    If a string representation of the level is passed in, the corresponding
+    numeric value is returned.
+
+    If no matching numeric or string value is passed in, the string
+    'Level %s' % level is returned.
+    """
+    # See Issues #22386, #27937 and #29220 for why it's this way
+    result = _levelToName.get(level)
+    if result is not None:
+        return result
+    result = _nameToLevel.get(level)
+    if result is not None:
+        return result
+    return "Level %s" % level
+
+def addLevelName(level, levelName):
+    """
+    Associate 'levelName' with 'level'.
+
+    This is used when converting levels to text during message formatting.
+    """
+    with _lock:
+        _levelToName[level] = levelName
+        _nameToLevel[levelName] = level
+
+if hasattr(sys, "_getframe"):
+    currentframe = lambda: sys._getframe(1)
+else: #pragma: no cover
+    def currentframe():
+        """Return the frame object for the caller's stack frame."""
+        try:
+            raise Exception
+        except Exception as exc:
+            return exc.__traceback__.tb_frame.f_back
+
+#
+# _srcfile is used when walking the stack to check when we've got the first
+# caller stack frame, by skipping frames whose filename is that of this
+# module's source. It therefore should contain the filename of this module's
+# source file.
+#
+# Ordinarily we would use __file__ for this, but frozen modules don't always
+# have __file__ set, for some reason (see Issue #21736). Thus, we get the
+# filename from a handy code object from a function defined in this module.
+# (There's no particular reason for picking addLevelName.)
+#
+
+_srcfile = os.path.normcase(addLevelName.__code__.co_filename)
+
+# _srcfile is only used in conjunction with sys._getframe().
+# Setting _srcfile to None will prevent findCaller() from being called. This
+# way, you can avoid the overhead of fetching caller information.
+
+# The following is based on warnings._is_internal_frame. It makes sure that
+# frames of the import mechanism are skipped when logging at module level and
+# using a stacklevel value greater than one.
+def _is_internal_frame(frame):
+    """Signal whether the frame is a CPython or logging module internal."""
+    filename = os.path.normcase(frame.f_code.co_filename)
+    return filename == _srcfile or (
+        "importlib" in filename and "_bootstrap" in filename
+    )
+
+
+def _checkLevel(level):
+    if isinstance(level, int):
+        rv = level
+    elif str(level) == level:
+        if level not in _nameToLevel:
+            raise ValueError("Unknown level: %r" % level)
+        rv = _nameToLevel[level]
+    else:
+        raise TypeError("Level not an integer or a valid string: %r"
+                        % (level,))
+    return rv
+
+#---------------------------------------------------------------------------
+#   Thread-related stuff
+#---------------------------------------------------------------------------
+
+#
+#_lock is used to serialize access to shared data structures in this module.
+#This needs to be an RLock because fileConfig() creates and configures
+#Handlers, and so might arbitrary user threads. Since Handler code updates the
+#shared dictionary _handlers, it needs to acquire the lock. But if configuring,
+#the lock would already have been acquired - so we need an RLock.
+#The same argument applies to Loggers and Manager.loggerDict.
+#
+_lock = threading.RLock()
+
+def _prepareFork():
+    """
+    Prepare to fork a new child process by acquiring the module-level lock.
+
+    This should be used in conjunction with _afterFork().
+    """
+    # Wrap the lock acquisition in a try-except to prevent the lock from being
+    # abandoned in the event of an asynchronous exception. See gh-106238.
+    try:
+        _lock.acquire()
+    except BaseException:
+        _lock.release()
+        raise
+
+def _afterFork():
+    """
+    After a new child process has been forked, release the module-level lock.
+
+    This should be used in conjunction with _prepareFork().
+    """
+    _lock.release()
+
+
+# Prevent a held logging lock from blocking a child from logging.
+
+if not hasattr(os, 'register_at_fork'):  # Windows and friends.
+    def _register_at_fork_reinit_lock(instance):
+        pass  # no-op when os.register_at_fork does not exist.
+else:
+    # A collection of instances with a _at_fork_reinit method (logging.Handler)
+    # to be called in the child after forking.  The weakref avoids us keeping
+    # discarded Handler instances alive.
+    _at_fork_reinit_lock_weakset = weakref.WeakSet()
+
+    def _register_at_fork_reinit_lock(instance):
+        with _lock:
+            _at_fork_reinit_lock_weakset.add(instance)
+
+    def _after_at_fork_child_reinit_locks():
+        for handler in _at_fork_reinit_lock_weakset:
+            handler._at_fork_reinit()
+
+        # _prepareFork() was called in the parent before forking.
+        # The lock is reinitialized to unlocked state.
+        _lock._at_fork_reinit()
+
+    os.register_at_fork(before=_prepareFork,
+                        after_in_child=_after_at_fork_child_reinit_locks,
+                        after_in_parent=_afterFork)
+
+
+#---------------------------------------------------------------------------
+#   The logging record
+#---------------------------------------------------------------------------
+
+class LogRecord(object):
+    """
+    A LogRecord instance represents an event being logged.
+
+    LogRecord instances are created every time something is logged. They
+    contain all the information pertinent to the event being logged. The
+    main information passed in is in msg and args, which are combined
+    using str(msg) % args to create the message field of the record. The
+    record also includes information such as when the record was created,
+    the source line where the logging call was made, and any exception
+    information to be logged.
+    """
+    def __init__(self, name, level, pathname, lineno,
+                 msg, args, exc_info, func=None, sinfo=None, **kwargs):
+        """
+        Initialize a logging record with interesting information.
+        """
+        ct = time.time_ns()
+        self.name = name
+        self.msg = msg
+        #
+        # The following statement allows passing of a dictionary as a sole
+        # argument, so that you can do something like
+        #  logging.debug("a %(a)d b %(b)s", {'a':1, 'b':2})
+        # Suggested by Stefan Behnel.
+        # Note that without the test for args[0], we get a problem because
+        # during formatting, we test to see if the arg is present using
+        # 'if self.args:'. If the event being logged is e.g. 'Value is %d'
+        # and if the passed arg fails 'if self.args:' then no formatting
+        # is done. For example, logger.warning('Value is %d', 0) would log
+        # 'Value is %d' instead of 'Value is 0'.
+        # For the use case of passing a dictionary, this should not be a
+        # problem.
+        # Issue #21172: a request was made to relax the isinstance check
+        # to hasattr(args[0], '__getitem__'). However, the docs on string
+        # formatting still seem to suggest a mapping object is required.
+        # Thus, while not removing the isinstance check, it does now look
+        # for collections.abc.Mapping rather than, as before, dict.
+        if (args and len(args) == 1 and isinstance(args[0], collections.abc.Mapping)
+            and args[0]):
+            args = args[0]
+        self.args = args
+        self.levelname = getLevelName(level)
+        self.levelno = level
+        self.pathname = pathname
+        try:
+            self.filename = os.path.basename(pathname)
+            self.module = os.path.splitext(self.filename)[0]
+        except (TypeError, ValueError, AttributeError):
+            self.filename = pathname
+            self.module = "Unknown module"
+        self.exc_info = exc_info
+        self.exc_text = None      # used to cache the traceback text
+        self.stack_info = sinfo
+        self.lineno = lineno
+        self.funcName = func
+        self.created = ct / 1e9  # ns to float seconds
+        # Get the number of whole milliseconds (0-999) in the fractional part of seconds.
+        # Eg: 1_677_903_920_999_998_503 ns --> 999_998_503 ns--> 999 ms
+        # Convert to float by adding 0.0 for historical reasons. See gh-89047
+        self.msecs = (ct % 1_000_000_000) // 1_000_000 + 0.0
+        if self.msecs == 999.0 and int(self.created) != ct // 1_000_000_000:
+            # ns -> sec conversion can round up, e.g:
+            # 1_677_903_920_999_999_900 ns --> 1_677_903_921.0 sec
+            self.msecs = 0.0
+
+        self.relativeCreated = (ct - _startTime) / 1e6
+        if logThreads:
+            self.thread = threading.get_ident()
+            self.threadName = threading.current_thread().name
+        else: # pragma: no cover
+            self.thread = None
+            self.threadName = None
+        if not logMultiprocessing: # pragma: no cover
+            self.processName = None
+        else:
+            self.processName = 'MainProcess'
+            mp = sys.modules.get('multiprocessing')
+            if mp is not None:
+                # Errors may occur if multiprocessing has not finished loading
+                # yet - e.g. if a custom import hook causes third-party code
+                # to run when multiprocessing calls import. See issue 8200
+                # for an example
+                try:
+                    self.processName = mp.current_process().name
+                except Exception: #pragma: no cover
+                    pass
+        if logProcesses and hasattr(os, 'getpid'):
+            self.process = os.getpid()
+        else:
+            self.process = None
+
+        self.taskName = None
+        if logAsyncioTasks:
+            asyncio = sys.modules.get('asyncio')
+            if asyncio:
+                try:
+                    self.taskName = asyncio.current_task().get_name()
+                except Exception:
+                    pass
+
+    def __repr__(self):
+        return '<LogRecord: %s, %s, %s, %s, "%s">'%(self.name, self.levelno,
+            self.pathname, self.lineno, self.msg)
+
+    def getMessage(self):
+        """
+        Return the message for this LogRecord.
+
+        Return the message for this LogRecord after merging any user-supplied
+        arguments with the message.
+        """
+        msg = str(self.msg)
+        if self.args:
+            msg = msg % self.args
+        return msg
+
+#
+#   Determine which class to use when instantiating log records.
+#
+_logRecordFactory = LogRecord
+
+def setLogRecordFactory(factory):
+    """
+    Set the factory to be used when instantiating a log record.
+
+    :param factory: A callable which will be called to instantiate
+    a log record.
+    """
+    global _logRecordFactory
+    _logRecordFactory = factory
+
+def getLogRecordFactory():
+    """
+    Return the factory to be used when instantiating a log record.
+    """
+
+    return _logRecordFactory
+
+def makeLogRecord(dict):
+    """
+    Make a LogRecord whose attributes are defined by the specified dictionary,
+    This function is useful for converting a logging event received over
+    a socket connection (which is sent as a dictionary) into a LogRecord
+    instance.
+    """
+    rv = _logRecordFactory(None, None, "", 0, "", (), None, None)
+    rv.__dict__.update(dict)
+    return rv
+
+
+#---------------------------------------------------------------------------
+#   Formatter classes and functions
+#---------------------------------------------------------------------------
+_str_formatter = StrFormatter()
+del StrFormatter
+
+
+class PercentStyle(object):
+
+    default_format = '%(message)s'
+    asctime_format = '%(asctime)s'
+    asctime_search = '%(asctime)'
+    validation_pattern = re.compile(r'%\(\w+\)[#0+ -]*(\*|\d+)?(\.(\*|\d+))?[diouxefgcrsa%]', re.I)
+
+    def __init__(self, fmt, *, defaults=None):
+        self._fmt = fmt or self.default_format
+        self._defaults = defaults
+
+    def usesTime(self):
+        return self._fmt.find(self.asctime_search) >= 0
+
+    def validate(self):
+        """Validate the input format, ensure it matches the correct style"""
+        if not self.validation_pattern.search(self._fmt):
+            raise ValueError("Invalid format '%s' for '%s' style" % (self._fmt, self.default_format[0]))
+
+    def _format(self, record):
+        if defaults := self._defaults:
+            values = defaults | record.__dict__
+        else:
+            values = record.__dict__
+        return self._fmt % values
+
+    def format(self, record):
+        try:
+            return self._format(record)
+        except KeyError as e:
+            raise ValueError('Formatting field not found in record: %s' % e)
+
+
+class StrFormatStyle(PercentStyle):
+    default_format = '{message}'
+    asctime_format = '{asctime}'
+    asctime_search = '{asctime'
+
+    fmt_spec = re.compile(r'^(.?[<>=^])?[+ -]?#?0?(\d+|{\w+})?[,_]?(\.(\d+|{\w+}))?[bcdefgnosx%]?$', re.I)
+    field_spec = re.compile(r'^(\d+|\w+)(\.\w+|\[[^]]+\])*$')
+
+    def _format(self, record):
+        if defaults := self._defaults:
+            values = defaults | record.__dict__
+        else:
+            values = record.__dict__
+        return self._fmt.format(**values)
+
+    def validate(self):
+        """Validate the input format, ensure it is the correct string formatting style"""
+        fields = set()
+        try:
+            for _, fieldname, spec, conversion in _str_formatter.parse(self._fmt):
+                if fieldname:
+                    if not self.field_spec.match(fieldname):
+                        raise ValueError('invalid field name/expression: %r' % fieldname)
+                    fields.add(fieldname)
+                if conversion and conversion not in 'rsa':
+                    raise ValueError('invalid conversion: %r' % conversion)
+                if spec and not self.fmt_spec.match(spec):
+                    raise ValueError('bad specifier: %r' % spec)
+        except ValueError as e:
+            raise ValueError('invalid format: %s' % e)
+        if not fields:
+            raise ValueError('invalid format: no fields')
+
+
+class StringTemplateStyle(PercentStyle):
+    default_format = '${message}'
+    asctime_format = '${asctime}'
+    asctime_search = '${asctime}'
+
+    def __init__(self, *args, **kwargs):
+        super().__init__(*args, **kwargs)
+        self._tpl = Template(self._fmt)
+
+    def usesTime(self):
+        fmt = self._fmt
+        return fmt.find('$asctime') >= 0 or fmt.find(self.asctime_search) >= 0
+
+    def validate(self):
+        pattern = Template.pattern
+        fields = set()
+        for m in pattern.finditer(self._fmt):
+            d = m.groupdict()
+            if d['named']:
+                fields.add(d['named'])
+            elif d['braced']:
+                fields.add(d['braced'])
+            elif m.group(0) == '$':
+                raise ValueError('invalid format: bare \'$\' not allowed')
+        if not fields:
+            raise ValueError('invalid format: no fields')
+
+    def _format(self, record):
+        if defaults := self._defaults:
+            values = defaults | record.__dict__
+        else:
+            values = record.__dict__
+        return self._tpl.substitute(**values)
+
+
+BASIC_FORMAT = "%(levelname)s:%(name)s:%(message)s"
+
+_STYLES = {
+    '%': (PercentStyle, BASIC_FORMAT),
+    '{': (StrFormatStyle, '{levelname}:{name}:{message}'),
+    '$': (StringTemplateStyle, '${levelname}:${name}:${message}'),
+}
+
+class Formatter(object):
+    """
+    Formatter instances are used to convert a LogRecord to text.
+
+    Formatters need to know how a LogRecord is constructed. They are
+    responsible for converting a LogRecord to (usually) a string which can
+    be interpreted by either a human or an external system. The base Formatter
+    allows a formatting string to be specified. If none is supplied, the
+    style-dependent default value, "%(message)s", "{message}", or
+    "${message}", is used.
+
+    The Formatter can be initialized with a format string which makes use of
+    knowledge of the LogRecord attributes - e.g. the default value mentioned
+    above makes use of the fact that the user's message and arguments are pre-
+    formatted into a LogRecord's message attribute. Currently, the useful
+    attributes in a LogRecord are described by:
+
+    %(name)s            Name of the logger (logging channel)
+    %(levelno)s         Numeric logging level for the message (DEBUG, INFO,
+                        WARNING, ERROR, CRITICAL)
+    %(levelname)s       Text logging level for the message ("DEBUG", "INFO",
+                        "WARNING", "ERROR", "CRITICAL")
+    %(pathname)s        Full pathname of the source file where the logging
+                        call was issued (if available)
+    %(filename)s        Filename portion of pathname
+    %(module)s          Module (name portion of filename)
+    %(lineno)d          Source line number where the logging call was issued
+                        (if available)
+    %(funcName)s        Function name
+    %(created)f         Time when the LogRecord was created (time.time_ns() / 1e9
+                        return value)
+    %(asctime)s         Textual time when the LogRecord was created
+    %(msecs)d           Millisecond portion of the creation time
+    %(relativeCreated)d Time in milliseconds when the LogRecord was created,
+                        relative to the time the logging module was loaded
+                        (typically at application startup time)
+    %(thread)d          Thread ID (if available)
+    %(threadName)s      Thread name (if available)
+    %(taskName)s        Task name (if available)
+    %(process)d         Process ID (if available)
+    %(processName)s     Process name (if available)
+    %(message)s         The result of record.getMessage(), computed just as
+                        the record is emitted
+    """
+
+    converter = time.localtime
+
+    def __init__(self, fmt=None, datefmt=None, style='%', validate=True, *,
+                 defaults=None):
+        """
+        Initialize the formatter with specified format strings.
+
+        Initialize the formatter either with the specified format string, or a
+        default as described above. Allow for specialized date formatting with
+        the optional datefmt argument. If datefmt is omitted, you get an
+        ISO8601-like (or RFC 3339-like) format.
+
+        Use a style parameter of '%', '{' or '$' to specify that you want to
+        use one of %-formatting, :meth:`str.format` (``{}``) formatting or
+        :class:`string.Template` formatting in your format string.
+
+        .. versionchanged:: 3.2
+           Added the ``style`` parameter.
+        """
+        if style not in _STYLES:
+            raise ValueError('Style must be one of: %s' % ','.join(
+                             _STYLES.keys()))
+        self._style = _STYLES[style][0](fmt, defaults=defaults)
+        if validate:
+            self._style.validate()
+
+        self._fmt = self._style._fmt
+        self.datefmt = datefmt
+
+    default_time_format = '%Y-%m-%d %H:%M:%S'
+    default_msec_format = '%s,%03d'
+
+    def formatTime(self, record, datefmt=None):
+        """
+        Return the creation time of the specified LogRecord as formatted text.
+
+        This method should be called from format() by a formatter which
+        wants to make use of a formatted time. This method can be overridden
+        in formatters to provide for any specific requirement, but the
+        basic behaviour is as follows: if datefmt (a string) is specified,
+        it is used with time.strftime() to format the creation time of the
+        record. Otherwise, an ISO8601-like (or RFC 3339-like) format is used.
+        The resulting string is returned. This function uses a user-configurable
+        function to convert the creation time to a tuple. By default,
+        time.localtime() is used; to change this for a particular formatter
+        instance, set the 'converter' attribute to a function with the same
+        signature as time.localtime() or time.gmtime(). To change it for all
+        formatters, for example if you want all logging times to be shown in GMT,
+        set the 'converter' attribute in the Formatter class.
+        """
+        ct = self.converter(record.created)
+        if datefmt:
+            s = time.strftime(datefmt, ct)
+        else:
+            s = time.strftime(self.default_time_format, ct)
+            if self.default_msec_format:
+                s = self.default_msec_format % (s, record.msecs)
+        return s
+
+    def formatException(self, ei):
+        """
+        Format and return the specified exception information as a string.
+
+        This default implementation just uses
+        traceback.print_exception()
+        """
+        sio = io.StringIO()
+        tb = ei[2]
+        # See issues #9427, #1553375. Commented out for now.
+        #if getattr(self, 'fullstack', False):
+        #    traceback.print_stack(tb.tb_frame.f_back, file=sio)
+        traceback.print_exception(ei[0], ei[1], tb, limit=None, file=sio)
+        s = sio.getvalue()
+        sio.close()
+        if s[-1:] == "\n":
+            s = s[:-1]
+        return s
+
+    def usesTime(self):
+        """
+        Check if the format uses the creation time of the record.
+        """
+        return self._style.usesTime()
+
+    def formatMessage(self, record):
+        return self._style.format(record)
+
+    def formatStack(self, stack_info):
+        """
+        This method is provided as an extension point for specialized
+        formatting of stack information.
+
+        The input data is a string as returned from a call to
+        :func:`traceback.print_stack`, but with the last trailing newline
+        removed.
+
+        The base implementation just returns the value passed in.
+        """
+        return stack_info
+
+    def format(self, record):
+        """
+        Format the specified record as text.
+
+        The record's attribute dictionary is used as the operand to a
+        string formatting operation which yields the returned string.
+        Before formatting the dictionary, a couple of preparatory steps
+        are carried out. The message attribute of the record is computed
+        using LogRecord.getMessage(). If the formatting string uses the
+        time (as determined by a call to usesTime(), formatTime() is
+        called to format the event time. If there is exception information,
+        it is formatted using formatException() and appended to the message.
+        """
+        record.message = record.getMessage()
+        if self.usesTime():
+            record.asctime = self.formatTime(record, self.datefmt)
+        s = self.formatMessage(record)
+        if record.exc_info:
+            # Cache the traceback text to avoid converting it multiple times
+            # (it's constant anyway)
+            if not record.exc_text:
+                record.exc_text = self.formatException(record.exc_info)
+        if record.exc_text:
+            if s[-1:] != "\n":
+                s = s + "\n"
+            s = s + record.exc_text
+        if record.stack_info:
+            if s[-1:] != "\n":
+                s = s + "\n"
+            s = s + self.formatStack(record.stack_info)
+        return s
+
+#
+#   The default formatter to use when no other is specified
+#
+_defaultFormatter = Formatter()
+
+class BufferingFormatter(object):
+    """
+    A formatter suitable for formatting a number of records.
+    """
+    def __init__(self, linefmt=None):
+        """
+        Optionally specify a formatter which will be used to format each
+        individual record.
+        """
+        if linefmt:
+            self.linefmt = linefmt
+        else:
+            self.linefmt = _defaultFormatter
+
+    def formatHeader(self, records):
+        """
+        Return the header string for the specified records.
+        """
+        return ""
+
+    def formatFooter(self, records):
+        """
+        Return the footer string for the specified records.
+        """
+        return ""
+
+    def format(self, records):
+        """
+        Format the specified records and return the result as a string.
+        """
+        rv = ""
+        if len(records) > 0:
+            rv = rv + self.formatHeader(records)
+            for record in records:
+                rv = rv + self.linefmt.format(record)
+            rv = rv + self.formatFooter(records)
+        return rv
+
+#---------------------------------------------------------------------------
+#   Filter classes and functions
+#---------------------------------------------------------------------------
+
+class Filter(object):
+    """
+    Filter instances are used to perform arbitrary filtering of LogRecords.
+
+    Loggers and Handlers can optionally use Filter instances to filter
+    records as desired. The base filter class only allows events which are
+    below a certain point in the logger hierarchy. For example, a filter
+    initialized with "A.B" will allow events logged by loggers "A.B",
+    "A.B.C", "A.B.C.D", "A.B.D" etc. but not "A.BB", "B.A.B" etc. If
+    initialized with the empty string, all events are passed.
+    """
+    def __init__(self, name=''):
+        """
+        Initialize a filter.
+
+        Initialize with the name of the logger which, together with its
+        children, will have its events allowed through the filter. If no
+        name is specified, allow every event.
+        """
+        self.name = name
+        self.nlen = len(name)
+
+    def filter(self, record):
+        """
+        Determine if the specified record is to be logged.
+
+        Returns True if the record should be logged, or False otherwise.
+        If deemed appropriate, the record may be modified in-place.
+        """
+        if self.nlen == 0:
+            return True
+        elif self.name == record.name:
+            return True
+        elif record.name.find(self.name, 0, self.nlen) != 0:
+            return False
+        return (record.name[self.nlen] == ".")
+
+class Filterer(object):
+    """
+    A base class for loggers and handlers which allows them to share
+    common code.
+    """
+    def __init__(self):
+        """
+        Initialize the list of filters to be an empty list.
+        """
+        self.filters = []
+
+    def addFilter(self, filter):
+        """
+        Add the specified filter to this handler.
+        """
+        if not (filter in self.filters):
+            self.filters.append(filter)
+
+    def removeFilter(self, filter):
+        """
+        Remove the specified filter from this handler.
+        """
+        if filter in self.filters:
+            self.filters.remove(filter)
+
+    def filter(self, record):
+        """
+        Determine if a record is loggable by consulting all the filters.
+
+        The default is to allow the record to be logged; any filter can veto
+        this by returning a false value.
+        If a filter attached to a handler returns a log record instance,
+        then that instance is used in place of the original log record in
+        any further processing of the event by that handler.
+        If a filter returns any other true value, the original log record
+        is used in any further processing of the event by that handler.
+
+        If none of the filters return false values, this method returns
+        a log record.
+        If any of the filters return a false value, this method returns
+        a false value.
+
+        .. versionchanged:: 3.2
+
+           Allow filters to be just callables.
+
+        .. versionchanged:: 3.12
+           Allow filters to return a LogRecord instead of
+           modifying it in place.
+        """
+        for f in self.filters:
+            if hasattr(f, 'filter'):
+                result = f.filter(record)
+            else:
+                result = f(record) # assume callable - will raise if not
+            if not result:
+                return False
+            if isinstance(result, LogRecord):
+                record = result
+        return record
+
+#---------------------------------------------------------------------------
+#   Handler classes and functions
+#---------------------------------------------------------------------------
+
+_handlers = weakref.WeakValueDictionary()  #map of handler names to handlers
+_handlerList = [] # added to allow handlers to be removed in reverse of order initialized
+
+def _removeHandlerRef(wr):
+    """
+    Remove a handler reference from the internal cleanup list.
+    """
+    # This function can be called during module teardown, when globals are
+    # set to None. It can also be called from another thread. So we need to
+    # pre-emptively grab the necessary globals and check if they're None,
+    # to prevent race conditions and failures during interpreter shutdown.
+    handlers, lock = _handlerList, _lock
+    if lock and handlers:
+        with lock:
+            try:
+                handlers.remove(wr)
+            except ValueError:
+                pass
+
+def _addHandlerRef(handler):
+    """
+    Add a handler to the internal cleanup list using a weak reference.
+    """
+    with _lock:
+        _handlerList.append(weakref.ref(handler, _removeHandlerRef))
+
+
+def getHandlerByName(name):
+    """
+    Get a handler with the specified *name*, or None if there isn't one with
+    that name.
+    """
+    return _handlers.get(name)
+
+
+def getHandlerNames():
+    """
+    Return all known handler names as an immutable set.
+    """
+    return frozenset(_handlers)
+
+
+class Handler(Filterer):
+    """
+    Handler instances dispatch logging events to specific destinations.
+
+    The base handler class. Acts as a placeholder which defines the Handler
+    interface. Handlers can optionally use Formatter instances to format
+    records as desired. By default, no formatter is specified; in this case,
+    the 'raw' message as determined by record.message is logged.
+    """
+    def __init__(self, level=NOTSET):
+        """
+        Initializes the instance - basically setting the formatter to None
+        and the filter list to empty.
+        """
+        Filterer.__init__(self)
+        self._name = None
+        self.level = _checkLevel(level)
+        self.formatter = None
+        self._closed = False
+        # Add the handler to the global _handlerList (for cleanup on shutdown)
+        _addHandlerRef(self)
+        self.createLock()
+
+    def get_name(self):
+        return self._name
+
+    def set_name(self, name):
+        with _lock:
+            if self._name in _handlers:
+                del _handlers[self._name]
+            self._name = name
+            if name:
+                _handlers[name] = self
+
+    name = property(get_name, set_name)
+
+    def createLock(self):
+        """
+        Acquire a thread lock for serializing access to the underlying I/O.
+        """
+        self.lock = threading.RLock()
+        _register_at_fork_reinit_lock(self)
+
+    def _at_fork_reinit(self):
+        self.lock._at_fork_reinit()
+
+    def acquire(self):
+        """
+        Acquire the I/O thread lock.
+        """
+        if self.lock:
+            self.lock.acquire()
+
+    def release(self):
+        """
+        Release the I/O thread lock.
+        """
+        if self.lock:
+            self.lock.release()
+
+    def setLevel(self, level):
+        """
+        Set the logging level of this handler.  level must be an int or a str.
+        """
+        self.level = _checkLevel(level)
+
+    def format(self, record):
+        """
+        Format the specified record.
+
+        If a formatter is set, use it. Otherwise, use the default formatter
+        for the module.
+        """
+        if self.formatter:
+            fmt = self.formatter
+        else:
+            fmt = _defaultFormatter
+        return fmt.format(record)
+
+    def emit(self, record):
+        """
+        Do whatever it takes to actually log the specified logging record.
+
+        This version is intended to be implemented by subclasses and so
+        raises a NotImplementedError.
+        """
+        raise NotImplementedError('emit must be implemented '
+                                  'by Handler subclasses')
+
+    def handle(self, record):
+        """
+        Conditionally emit the specified logging record.
+
+        Emission depends on filters which may have been added to the handler.
+        Wrap the actual emission of the record with acquisition/release of
+        the I/O thread lock.
+
+        Returns an instance of the log record that was emitted
+        if it passed all filters, otherwise a false value is returned.
+        """
+        rv = self.filter(record)
+        if isinstance(rv, LogRecord):
+            record = rv
+        if rv:
+            with self.lock:
+                self.emit(record)
+        return rv
+
+    def setFormatter(self, fmt):
+        """
+        Set the formatter for this handler.
+        """
+        self.formatter = fmt
+
+    def flush(self):
+        """
+        Ensure all logging output has been flushed.
+
+        This version does nothing and is intended to be implemented by
+        subclasses.
+        """
+        pass
+
+    def close(self):
+        """
+        Tidy up any resources used by the handler.
+
+        This version removes the handler from an internal map of handlers,
+        _handlers, which is used for handler lookup by name. Subclasses
+        should ensure that this gets called from overridden close()
+        methods.
+        """
+        #get the module data lock, as we're updating a shared structure.
+        with _lock:
+            self._closed = True
+            if self._name and self._name in _handlers:
+                del _handlers[self._name]
+
+    def handleError(self, record):
+        """
+        Handle errors which occur during an emit() call.
+
+        This method should be called from handlers when an exception is
+        encountered during an emit() call. If raiseExceptions is false,
+        exceptions get silently ignored. This is what is mostly wanted
+        for a logging system - most users will not care about errors in
+        the logging system, they are more interested in application errors.
+        You could, however, replace this with a custom handler if you wish.
+        The record which was being processed is passed in to this method.
+        """
+        if raiseExceptions and sys.stderr:  # see issue 13807
+            exc = sys.exception()
+            try:
+                sys.stderr.write('--- Logging error ---\n')
+                traceback.print_exception(exc, limit=None, file=sys.stderr)
+                sys.stderr.write('Call stack:\n')
+                # Walk the stack frame up until we're out of logging,
+                # so as to print the calling context.
+                frame = exc.__traceback__.tb_frame
+                while (frame and os.path.dirname(frame.f_code.co_filename) ==
+                       __path__[0]):
+                    frame = frame.f_back
+                if frame:
+                    traceback.print_stack(frame, file=sys.stderr)
+                else:
+                    # couldn't find the right stack frame, for some reason
+                    sys.stderr.write('Logged from file %s, line %s\n' % (
+                                     record.filename, record.lineno))
+                # Issue 18671: output logging message and arguments
+                try:
+                    sys.stderr.write('Message: %r\n'
+                                     'Arguments: %s\n' % (record.msg,
+                                                          record.args))
+                except RecursionError:  # See issue 36272
+                    raise
+                except Exception:
+                    sys.stderr.write('Unable to print the message and arguments'
+                                     ' - possible formatting error.\nUse the'
+                                     ' traceback above to help find the error.\n'
+                                    )
+            except OSError: #pragma: no cover
+                pass    # see issue 5971
+            finally:
+                del exc
+
+    def __repr__(self):
+        level = getLevelName(self.level)
+        return '<%s (%s)>' % (self.__class__.__name__, level)
+
+class StreamHandler(Handler):
+    """
+    A handler class which writes logging records, appropriately formatted,
+    to a stream. Note that this class does not close the stream, as
+    sys.stdout or sys.stderr may be used.
+    """
+
+    terminator = '\n'
+
+    def __init__(self, stream=None):
+        """
+        Initialize the handler.
+
+        If stream is not specified, sys.stderr is used.
+        """
+        Handler.__init__(self)
+        if stream is None:
+            stream = sys.stderr
+        self.stream = stream
+
+    def flush(self):
+        """
+        Flushes the stream.
+        """
+        with self.lock:
+            if self.stream and hasattr(self.stream, "flush"):
+                self.stream.flush()
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        If a formatter is specified, it is used to format the record.
+        The record is then written to the stream with a trailing newline.  If
+        exception information is present, it is formatted using
+        traceback.print_exception and appended to the stream.  If the stream
+        has an 'encoding' attribute, it is used to determine how to do the
+        output to the stream.
+        """
+        try:
+            msg = self.format(record)
+            stream = self.stream
+            # issue 35046: merged two stream.writes into one.
+            stream.write(msg + self.terminator)
+            self.flush()
+        except RecursionError:  # See issue 36272
+            raise
+        except Exception:
+            self.handleError(record)
+
+    def setStream(self, stream):
+        """
+        Sets the StreamHandler's stream to the specified value,
+        if it is different.
+
+        Returns the old stream, if the stream was changed, or None
+        if it wasn't.
+        """
+        if stream is self.stream:
+            result = None
+        else:
+            result = self.stream
+            with self.lock:
+                self.flush()
+                self.stream = stream
+        return result
+
+    def __repr__(self):
+        level = getLevelName(self.level)
+        name = getattr(self.stream, 'name', '')
+        #  bpo-36015: name can be an int
+        name = str(name)
+        if name:
+            name += ' '
+        return '<%s %s(%s)>' % (self.__class__.__name__, name, level)
+
+    __class_getitem__ = classmethod(GenericAlias)
+
+
+class FileHandler(StreamHandler):
+    """
+    A handler class which writes formatted logging records to disk files.
+    """
+    def __init__(self, filename, mode='a', encoding=None, delay=False, errors=None):
+        """
+        Open the specified file and use it as the stream for logging.
+        """
+        # Issue #27493: add support for Path objects to be passed in
+        filename = os.fspath(filename)
+        #keep the absolute path, otherwise derived classes which use this
+        #may come a cropper when the current directory changes
+        self.baseFilename = os.path.abspath(filename)
+        self.mode = mode
+        self.encoding = encoding
+        if "b" not in mode:
+            self.encoding = io.text_encoding(encoding)
+        self.errors = errors
+        self.delay = delay
+        # bpo-26789: FileHandler keeps a reference to the builtin open()
+        # function to be able to open or reopen the file during Python
+        # finalization.
+        self._builtin_open = open
+        if delay:
+            #We don't open the stream, but we still need to call the
+            #Handler constructor to set level, formatter, lock etc.
+            Handler.__init__(self)
+            self.stream = None
+        else:
+            StreamHandler.__init__(self, self._open())
+
+    def close(self):
+        """
+        Closes the stream.
+        """
+        with self.lock:
+            try:
+                if self.stream:
+                    try:
+                        self.flush()
+                    finally:
+                        stream = self.stream
+                        self.stream = None
+                        if hasattr(stream, "close"):
+                            stream.close()
+            finally:
+                # Issue #19523: call unconditionally to
+                # prevent a handler leak when delay is set
+                # Also see Issue #42378: we also rely on
+                # self._closed being set to True there
+                StreamHandler.close(self)
+
+    def _open(self):
+        """
+        Open the current base file with the (original) mode and encoding.
+        Return the resulting stream.
+        """
+        open_func = self._builtin_open
+        return open_func(self.baseFilename, self.mode,
+                         encoding=self.encoding, errors=self.errors)
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        If the stream was not opened because 'delay' was specified in the
+        constructor, open it before calling the superclass's emit.
+
+        If stream is not open, current mode is 'w' and `_closed=True`, record
+        will not be emitted (see Issue #42378).
+        """
+        if self.stream is None:
+            if self.mode != 'w' or not self._closed:
+                self.stream = self._open()
+        if self.stream:
+            StreamHandler.emit(self, record)
+
+    def __repr__(self):
+        level = getLevelName(self.level)
+        return '<%s %s (%s)>' % (self.__class__.__name__, self.baseFilename, level)
+
+
+class _StderrHandler(StreamHandler):
+    """
+    This class is like a StreamHandler using sys.stderr, but always uses
+    whatever sys.stderr is currently set to rather than the value of
+    sys.stderr at handler construction time.
+    """
+    def __init__(self, level=NOTSET):
+        """
+        Initialize the handler.
+        """
+        Handler.__init__(self, level)
+
+    @property
+    def stream(self):
+        return sys.stderr
+
+
+_defaultLastResort = _StderrHandler(WARNING)
+lastResort = _defaultLastResort
+
+#---------------------------------------------------------------------------
+#   Manager classes and functions
+#---------------------------------------------------------------------------
+
+class PlaceHolder(object):
+    """
+    PlaceHolder instances are used in the Manager logger hierarchy to take
+    the place of nodes for which no loggers have been defined. This class is
+    intended for internal use only and not as part of the public API.
+    """
+    def __init__(self, alogger):
+        """
+        Initialize with the specified logger being a child of this placeholder.
+        """
+        self.loggerMap = { alogger : None }
+
+    def append(self, alogger):
+        """
+        Add the specified logger as a child of this placeholder.
+        """
+        if alogger not in self.loggerMap:
+            self.loggerMap[alogger] = None
+
+#
+#   Determine which class to use when instantiating loggers.
+#
+
+def setLoggerClass(klass):
+    """
+    Set the class to be used when instantiating a logger. The class should
+    define __init__() such that only a name argument is required, and the
+    __init__() should call Logger.__init__()
+    """
+    if klass != Logger:
+        if not issubclass(klass, Logger):
+            raise TypeError("logger not derived from logging.Logger: "
+                            + klass.__name__)
+    global _loggerClass
+    _loggerClass = klass
+
+def getLoggerClass():
+    """
+    Return the class to be used when instantiating a logger.
+    """
+    return _loggerClass
+
+class Manager(object):
+    """
+    There is [under normal circumstances] just one Manager instance, which
+    holds the hierarchy of loggers.
+    """
+    def __init__(self, rootnode):
+        """
+        Initialize the manager with the root node of the logger hierarchy.
+        """
+        self.root = rootnode
+        self.disable = 0
+        self.emittedNoHandlerWarning = False
+        self.loggerDict = {}
+        self.loggerClass = None
+        self.logRecordFactory = None
+
+    @property
+    def disable(self):
+        return self._disable
+
+    @disable.setter
+    def disable(self, value):
+        self._disable = _checkLevel(value)
+
+    def getLogger(self, name):
+        """
+        Get a logger with the specified name (channel name), creating it
+        if it doesn't yet exist. This name is a dot-separated hierarchical
+        name, such as "a", "a.b", "a.b.c" or similar.
+
+        If a PlaceHolder existed for the specified name [i.e. the logger
+        didn't exist but a child of it did], replace it with the created
+        logger and fix up the parent/child references which pointed to the
+        placeholder to now point to the logger.
+        """
+        rv = None
+        if not isinstance(name, str):
+            raise TypeError('A logger name must be a string')
+        with _lock:
+            if name in self.loggerDict:
+                rv = self.loggerDict[name]
+                if isinstance(rv, PlaceHolder):
+                    ph = rv
+                    rv = (self.loggerClass or _loggerClass)(name)
+                    rv.manager = self
+                    self.loggerDict[name] = rv
+                    self._fixupChildren(ph, rv)
+                    self._fixupParents(rv)
+            else:
+                rv = (self.loggerClass or _loggerClass)(name)
+                rv.manager = self
+                self.loggerDict[name] = rv
+                self._fixupParents(rv)
+        return rv
+
+    def setLoggerClass(self, klass):
+        """
+        Set the class to be used when instantiating a logger with this Manager.
+        """
+        if klass != Logger:
+            if not issubclass(klass, Logger):
+                raise TypeError("logger not derived from logging.Logger: "
+                                + klass.__name__)
+        self.loggerClass = klass
+
+    def setLogRecordFactory(self, factory):
+        """
+        Set the factory to be used when instantiating a log record with this
+        Manager.
+        """
+        self.logRecordFactory = factory
+
+    def _fixupParents(self, alogger):
+        """
+        Ensure that there are either loggers or placeholders all the way
+        from the specified logger to the root of the logger hierarchy.
+        """
+        name = alogger.name
+        i = name.rfind(".")
+        rv = None
+        while (i > 0) and not rv:
+            substr = name[:i]
+            if substr not in self.loggerDict:
+                self.loggerDict[substr] = PlaceHolder(alogger)
+            else:
+                obj = self.loggerDict[substr]
+                if isinstance(obj, Logger):
+                    rv = obj
+                else:
+                    assert isinstance(obj, PlaceHolder)
+                    obj.append(alogger)
+            i = name.rfind(".", 0, i - 1)
+        if not rv:
+            rv = self.root
+        alogger.parent = rv
+
+    def _fixupChildren(self, ph, alogger):
+        """
+        Ensure that children of the placeholder ph are connected to the
+        specified logger.
+        """
+        name = alogger.name
+        namelen = len(name)
+        for c in ph.loggerMap.keys():
+            #The if means ... if not c.parent.name.startswith(nm)
+            if c.parent.name[:namelen] != name:
+                alogger.parent = c.parent
+                c.parent = alogger
+
+    def _clear_cache(self):
+        """
+        Clear the cache for all loggers in loggerDict
+        Called when level changes are made
+        """
+
+        with _lock:
+            for logger in self.loggerDict.values():
+                if isinstance(logger, Logger):
+                    logger._cache.clear()
+            self.root._cache.clear()
+
+#---------------------------------------------------------------------------
+#   Logger classes and functions
+#---------------------------------------------------------------------------
+
+class Logger(Filterer):
+    """
+    Instances of the Logger class represent a single logging channel. A
+    "logging channel" indicates an area of an application. Exactly how an
+    "area" is defined is up to the application developer. Since an
+    application can have any number of areas, logging channels are identified
+    by a unique string. Application areas can be nested (e.g. an area
+    of "input processing" might include sub-areas "read CSV files", "read
+    XLS files" and "read Gnumeric files"). To cater for this natural nesting,
+    channel names are organized into a namespace hierarchy where levels are
+    separated by periods, much like the Java or Python package namespace. So
+    in the instance given above, channel names might be "input" for the upper
+    level, and "input.csv", "input.xls" and "input.gnu" for the sub-levels.
+    There is no arbitrary limit to the depth of nesting.
+    """
+    def __init__(self, name, level=NOTSET):
+        """
+        Initialize the logger with a name and an optional level.
+        """
+        Filterer.__init__(self)
+        self.name = name
+        self.level = _checkLevel(level)
+        self.parent = None
+        self.propagate = True
+        self.handlers = []
+        self.disabled = False
+        self._cache = {}
+
+    def setLevel(self, level):
+        """
+        Set the logging level of this logger.  level must be an int or a str.
+        """
+        self.level = _checkLevel(level)
+        self.manager._clear_cache()
+
+    def debug(self, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with severity 'DEBUG'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.debug("Houston, we have a %s", "thorny problem", exc_info=True)
+        """
+        if self.isEnabledFor(DEBUG):
+            self._log(DEBUG, msg, args, **kwargs)
+
+    def info(self, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with severity 'INFO'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.info("Houston, we have a %s", "notable problem", exc_info=True)
+        """
+        if self.isEnabledFor(INFO):
+            self._log(INFO, msg, args, **kwargs)
+
+    def warning(self, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with severity 'WARNING'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.warning("Houston, we have a %s", "bit of a problem", exc_info=True)
+        """
+        if self.isEnabledFor(WARNING):
+            self._log(WARNING, msg, args, **kwargs)
+
+    def warn(self, msg, *args, **kwargs):
+        warnings.warn("The 'warn' method is deprecated, "
+            "use 'warning' instead", DeprecationWarning, 2)
+        self.warning(msg, *args, **kwargs)
+
+    def error(self, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with severity 'ERROR'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.error("Houston, we have a %s", "major problem", exc_info=True)
+        """
+        if self.isEnabledFor(ERROR):
+            self._log(ERROR, msg, args, **kwargs)
+
+    def exception(self, msg, *args, exc_info=True, **kwargs):
+        """
+        Convenience method for logging an ERROR with exception information.
+        """
+        self.error(msg, *args, exc_info=exc_info, **kwargs)
+
+    def critical(self, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with severity 'CRITICAL'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.critical("Houston, we have a %s", "major disaster", exc_info=True)
+        """
+        if self.isEnabledFor(CRITICAL):
+            self._log(CRITICAL, msg, args, **kwargs)
+
+    def fatal(self, msg, *args, **kwargs):
+        """
+        Don't use this method, use critical() instead.
+        """
+        self.critical(msg, *args, **kwargs)
+
+    def log(self, level, msg, *args, **kwargs):
+        """
+        Log 'msg % args' with the integer severity 'level'.
+
+        To pass exception information, use the keyword argument exc_info with
+        a true value, e.g.
+
+        logger.log(level, "We have a %s", "mysterious problem", exc_info=True)
+        """
+        if not isinstance(level, int):
+            if raiseExceptions:
+                raise TypeError("level must be an integer")
+            else:
+                return
+        if self.isEnabledFor(level):
+            self._log(level, msg, args, **kwargs)
+
+    def findCaller(self, stack_info=False, stacklevel=1):
+        """
+        Find the stack frame of the caller so that we can note the source
+        file name, line number and function name.
+        """
+        f = currentframe()
+        #On some versions of IronPython, currentframe() returns None if
+        #IronPython isn't run with -X:Frames.
+        if f is None:
+            return "(unknown file)", 0, "(unknown function)", None
+        while stacklevel > 0:
+            next_f = f.f_back
+            if next_f is None:
+                ## We've got options here.
+                ## If we want to use the last (deepest) frame:
+                break
+                ## If we want to mimic the warnings module:
+                #return ("sys", 1, "(unknown function)", None)
+                ## If we want to be pedantic:
+                #raise ValueError("call stack is not deep enough")
+            f = next_f
+            if not _is_internal_frame(f):
+                stacklevel -= 1
+        co = f.f_code
+        sinfo = None
+        if stack_info:
+            with io.StringIO() as sio:
+                sio.write("Stack (most recent call last):\n")
+                traceback.print_stack(f, file=sio)
+                sinfo = sio.getvalue()
+                if sinfo[-1] == '\n':
+                    sinfo = sinfo[:-1]
+        return co.co_filename, f.f_lineno, co.co_name, sinfo
+
+    def makeRecord(self, name, level, fn, lno, msg, args, exc_info,
+                   func=None, extra=None, sinfo=None):
+        """
+        A factory method which can be overridden in subclasses to create
+        specialized LogRecords.
+        """
+        rv = _logRecordFactory(name, level, fn, lno, msg, args, exc_info, func,
+                             sinfo)
+        if extra is not None:
+            for key in extra:
+                if (key in ["message", "asctime"]) or (key in rv.__dict__):
+                    raise KeyError("Attempt to overwrite %r in LogRecord" % key)
+                rv.__dict__[key] = extra[key]
+        return rv
+
+    def _log(self, level, msg, args, exc_info=None, extra=None, stack_info=False,
+             stacklevel=1):
+        """
+        Low-level logging routine which creates a LogRecord and then calls
+        all the handlers of this logger to handle the record.
+        """
+        sinfo = None
+        if _srcfile:
+            #IronPython doesn't track Python frames, so findCaller raises an
+            #exception on some versions of IronPython. We trap it here so that
+            #IronPython can use logging.
+            try:
+                fn, lno, func, sinfo = self.findCaller(stack_info, stacklevel)
+            except ValueError: # pragma: no cover
+                fn, lno, func = "(unknown file)", 0, "(unknown function)"
+        else: # pragma: no cover
+            fn, lno, func = "(unknown file)", 0, "(unknown function)"
+        if exc_info:
+            if isinstance(exc_info, BaseException):
+                exc_info = (type(exc_info), exc_info, exc_info.__traceback__)
+            elif not isinstance(exc_info, tuple):
+                exc_info = sys.exc_info()
+        record = self.makeRecord(self.name, level, fn, lno, msg, args,
+                                 exc_info, func, extra, sinfo)
+        self.handle(record)
+
+    def handle(self, record):
+        """
+        Call the handlers for the specified record.
+
+        This method is used for unpickled records received from a socket, as
+        well as those created locally. Logger-level filtering is applied.
+        """
+        if self.disabled:
+            return
+        maybe_record = self.filter(record)
+        if not maybe_record:
+            return
+        if isinstance(maybe_record, LogRecord):
+            record = maybe_record
+        self.callHandlers(record)
+
+    def addHandler(self, hdlr):
+        """
+        Add the specified handler to this logger.
+        """
+        with _lock:
+            if not (hdlr in self.handlers):
+                self.handlers.append(hdlr)
+
+    def removeHandler(self, hdlr):
+        """
+        Remove the specified handler from this logger.
+        """
+        with _lock:
+            if hdlr in self.handlers:
+                self.handlers.remove(hdlr)
+
+    def hasHandlers(self):
+        """
+        See if this logger has any handlers configured.
+
+        Loop through all handlers for this logger and its parents in the
+        logger hierarchy. Return True if a handler was found, else False.
+        Stop searching up the hierarchy whenever a logger with the "propagate"
+        attribute set to zero is found - that will be the last logger which
+        is checked for the existence of handlers.
+        """
+        c = self
+        rv = False
+        while c:
+            if c.handlers:
+                rv = True
+                break
+            if not c.propagate:
+                break
+            else:
+                c = c.parent
+        return rv
+
+    def callHandlers(self, record):
+        """
+        Pass a record to all relevant handlers.
+
+        Loop through all handlers for this logger and its parents in the
+        logger hierarchy. If no handler was found, output a one-off error
+        message to sys.stderr. Stop searching up the hierarchy whenever a
+        logger with the "propagate" attribute set to zero is found - that
+        will be the last logger whose handlers are called.
+        """
+        c = self
+        found = 0
+        while c:
+            for hdlr in c.handlers:
+                found = found + 1
+                if record.levelno >= hdlr.level:
+                    hdlr.handle(record)
+            if not c.propagate:
+                c = None    #break out
+            else:
+                c = c.parent
+        if (found == 0):
+            if lastResort:
+                if record.levelno >= lastResort.level:
+                    lastResort.handle(record)
+            elif raiseExceptions and not self.manager.emittedNoHandlerWarning:
+                sys.stderr.write("No handlers could be found for logger"
+                                 " \"%s\"\n" % self.name)
+                self.manager.emittedNoHandlerWarning = True
+
+    def getEffectiveLevel(self):
+        """
+        Get the effective level for this logger.
+
+        Loop through this logger and its parents in the logger hierarchy,
+        looking for a non-zero logging level. Return the first one found.
+        """
+        logger = self
+        while logger:
+            if logger.level:
+                return logger.level
+            logger = logger.parent
+        return NOTSET
+
+    def isEnabledFor(self, level):
+        """
+        Is this logger enabled for level 'level'?
+        """
+        if self.disabled:
+            return False
+
+        try:
+            return self._cache[level]
+        except KeyError:
+            with _lock:
+                if self.manager.disable >= level:
+                    is_enabled = self._cache[level] = False
+                else:
+                    is_enabled = self._cache[level] = (
+                        level >= self.getEffectiveLevel()
+                    )
+            return is_enabled
+
+    def getChild(self, suffix):
+        """
+        Get a logger which is a descendant to this one.
+
+        This is a convenience method, such that
+
+        logging.getLogger('abc').getChild('def.ghi')
+
+        is the same as
+
+        logging.getLogger('abc.def.ghi')
+
+        It's useful, for example, when the parent logger is named using
+        __name__ rather than a literal string.
+        """
+        if self.root is not self:
+            suffix = '.'.join((self.name, suffix))
+        return self.manager.getLogger(suffix)
+
+    def getChildren(self):
+
+        def _hierlevel(logger):
+            if logger is logger.manager.root:
+                return 0
+            return 1 + logger.name.count('.')
+
+        d = self.manager.loggerDict
+        with _lock:
+            # exclude PlaceHolders - the last check is to ensure that lower-level
+            # descendants aren't returned - if there are placeholders, a logger's
+            # parent field might point to a grandparent or ancestor thereof.
+            return set(item for item in d.values()
+                       if isinstance(item, Logger) and item.parent is self and
+                       _hierlevel(item) == 1 + _hierlevel(item.parent))
+
+    def __repr__(self):
+        level = getLevelName(self.getEffectiveLevel())
+        return '<%s %s (%s)>' % (self.__class__.__name__, self.name, level)
+
+    def __reduce__(self):
+        if getLogger(self.name) is not self:
+            import pickle
+            raise pickle.PicklingError('logger cannot be pickled')
+        return getLogger, (self.name,)
+
+
+class RootLogger(Logger):
+    """
+    A root logger is not that different to any other logger, except that
+    it must have a logging level and there is only one instance of it in
+    the hierarchy.
+    """
+    def __init__(self, level):
+        """
+        Initialize the logger with the name "root".
+        """
+        Logger.__init__(self, "root", level)
+
+    def __reduce__(self):
+        return getLogger, ()
+
+_loggerClass = Logger
+
+class LoggerAdapter(object):
+    """
+    An adapter for loggers which makes it easier to specify contextual
+    information in logging output.
+    """
+
+    def __init__(self, logger, extra=None, merge_extra=False):
+        """
+        Initialize the adapter with a logger and an optional dict-like object
+        which provides contextual information. This constructor signature
+        allows easy stacking of LoggerAdapters, if so desired.
+
+        You can effectively pass keyword arguments as shown in the
+        following example:
+
+        adapter = LoggerAdapter(someLogger, dict(p1=v1, p2="v2"))
+
+        By default, LoggerAdapter objects will drop the "extra" argument
+        passed on the individual log calls to use its own instead.
+
+        Initializing it with merge_extra=True will instead merge both
+        maps when logging, the individual call extra taking precedence
+        over the LoggerAdapter instance extra
+
+        .. versionchanged:: 3.13
+           The *merge_extra* argument was added.
+        """
+        self.logger = logger
+        self.extra = extra
+        self.merge_extra = merge_extra
+
+    def process(self, msg, kwargs):
+        """
+        Process the logging message and keyword arguments passed in to
+        a logging call to insert contextual information. You can either
+        manipulate the message itself, the keyword args or both. Return
+        the message and kwargs modified (or not) to suit your needs.
+
+        Normally, you'll only need to override this one method in a
+        LoggerAdapter subclass for your specific needs.
+        """
+        if self.merge_extra and kwargs.get("extra") is not None:
+            if self.extra is not None:
+                kwargs["extra"] = {**self.extra, **kwargs["extra"]}
+        else:
+            kwargs["extra"] = self.extra
+        return msg, kwargs
+
+    #
+    # Boilerplate convenience methods
+    #
+    def debug(self, msg, *args, **kwargs):
+        """
+        Delegate a debug call to the underlying logger.
+        """
+        self.log(DEBUG, msg, *args, **kwargs)
+
+    def info(self, msg, *args, **kwargs):
+        """
+        Delegate an info call to the underlying logger.
+        """
+        self.log(INFO, msg, *args, **kwargs)
+
+    def warning(self, msg, *args, **kwargs):
+        """
+        Delegate a warning call to the underlying logger.
+        """
+        self.log(WARNING, msg, *args, **kwargs)
+
+    def warn(self, msg, *args, **kwargs):
+        warnings.warn("The 'warn' method is deprecated, "
+            "use 'warning' instead", DeprecationWarning, 2)
+        self.warning(msg, *args, **kwargs)
+
+    def error(self, msg, *args, **kwargs):
+        """
+        Delegate an error call to the underlying logger.
+        """
+        self.log(ERROR, msg, *args, **kwargs)
+
+    def exception(self, msg, *args, exc_info=True, **kwargs):
+        """
+        Delegate an exception call to the underlying logger.
+        """
+        self.log(ERROR, msg, *args, exc_info=exc_info, **kwargs)
+
+    def critical(self, msg, *args, **kwargs):
+        """
+        Delegate a critical call to the underlying logger.
+        """
+        self.log(CRITICAL, msg, *args, **kwargs)
+
+    def log(self, level, msg, *args, **kwargs):
+        """
+        Delegate a log call to the underlying logger, after adding
+        contextual information from this adapter instance.
+        """
+        if self.isEnabledFor(level):
+            msg, kwargs = self.process(msg, kwargs)
+            self.logger.log(level, msg, *args, **kwargs)
+
+    def isEnabledFor(self, level):
+        """
+        Is this logger enabled for level 'level'?
+        """
+        return self.logger.isEnabledFor(level)
+
+    def setLevel(self, level):
+        """
+        Set the specified level on the underlying logger.
+        """
+        self.logger.setLevel(level)
+
+    def getEffectiveLevel(self):
+        """
+        Get the effective level for the underlying logger.
+        """
+        return self.logger.getEffectiveLevel()
+
+    def hasHandlers(self):
+        """
+        See if the underlying logger has any handlers.
+        """
+        return self.logger.hasHandlers()
+
+    def _log(self, level, msg, args, **kwargs):
+        """
+        Low-level log implementation, proxied to allow nested logger adapters.
+        """
+        return self.logger._log(level, msg, args, **kwargs)
+
+    @property
+    def manager(self):
+        return self.logger.manager
+
+    @manager.setter
+    def manager(self, value):
+        self.logger.manager = value
+
+    @property
+    def name(self):
+        return self.logger.name
+
+    def __repr__(self):
+        logger = self.logger
+        level = getLevelName(logger.getEffectiveLevel())
+        return '<%s %s (%s)>' % (self.__class__.__name__, logger.name, level)
+
+    __class_getitem__ = classmethod(GenericAlias)
+
+root = RootLogger(WARNING)
+Logger.root = root
+Logger.manager = Manager(Logger.root)
+
+#---------------------------------------------------------------------------
+# Configuration classes and functions
+#---------------------------------------------------------------------------
+
+def basicConfig(**kwargs):
+    """
+    Do basic configuration for the logging system.
+
+    This function does nothing if the root logger already has handlers
+    configured, unless the keyword argument *force* is set to ``True``.
+    It is a convenience method intended for use by simple scripts
+    to do one-shot configuration of the logging package.
+
+    The default behaviour is to create a StreamHandler which writes to
+    sys.stderr, set a formatter using the BASIC_FORMAT format string, and
+    add the handler to the root logger.
+
+    A number of optional keyword arguments may be specified, which can alter
+    the default behaviour.
+
+    filename  Specifies that a FileHandler be created, using the specified
+              filename, rather than a StreamHandler.
+    filemode  Specifies the mode to open the file, if filename is specified
+              (if filemode is unspecified, it defaults to 'a').
+    format    Use the specified format string for the handler.
+    datefmt   Use the specified date/time format.
+    style     If a format string is specified, use this to specify the
+              type of format string (possible values '%', '{', '$', for
+              %-formatting, :meth:`str.format` and :class:`string.Template`
+              - defaults to '%').
+    level     Set the root logger level to the specified level.
+    stream    Use the specified stream to initialize the StreamHandler. Note
+              that this argument is incompatible with 'filename' - if both
+              are present, 'stream' is ignored.
+    handlers  If specified, this should be an iterable of already created
+              handlers, which will be added to the root logger. Any handler
+              in the list which does not have a formatter assigned will be
+              assigned the formatter created in this function.
+    force     If this keyword  is specified as true, any existing handlers
+              attached to the root logger are removed and closed, before
+              carrying out the configuration as specified by the other
+              arguments.
+    encoding  If specified together with a filename, this encoding is passed to
+              the created FileHandler, causing it to be used when the file is
+              opened.
+    errors    If specified together with a filename, this value is passed to the
+              created FileHandler, causing it to be used when the file is
+              opened in text mode. If not specified, the default value is
+              `backslashreplace`.
+
+    Note that you could specify a stream created using open(filename, mode)
+    rather than passing the filename and mode in. However, it should be
+    remembered that StreamHandler does not close its stream (since it may be
+    using sys.stdout or sys.stderr), whereas FileHandler closes its stream
+    when the handler is closed.
+
+    .. versionchanged:: 3.2
+       Added the ``style`` parameter.
+
+    .. versionchanged:: 3.3
+       Added the ``handlers`` parameter. A ``ValueError`` is now thrown for
+       incompatible arguments (e.g. ``handlers`` specified together with
+       ``filename``/``filemode``, or ``filename``/``filemode`` specified
+       together with ``stream``, or ``handlers`` specified together with
+       ``stream``.
+
+    .. versionchanged:: 3.8
+       Added the ``force`` parameter.
+
+    .. versionchanged:: 3.9
+       Added the ``encoding`` and ``errors`` parameters.
+    """
+    # Add thread safety in case someone mistakenly calls
+    # basicConfig() from multiple threads
+    with _lock:
+        force = kwargs.pop('force', False)
+        encoding = kwargs.pop('encoding', None)
+        errors = kwargs.pop('errors', 'backslashreplace')
+        if force:
+            for h in root.handlers[:]:
+                root.removeHandler(h)
+                h.close()
+        if len(root.handlers) == 0:
+            handlers = kwargs.pop("handlers", None)
+            if handlers is None:
+                if "stream" in kwargs and "filename" in kwargs:
+                    raise ValueError("'stream' and 'filename' should not be "
+                                     "specified together")
+            else:
+                if "stream" in kwargs or "filename" in kwargs:
+                    raise ValueError("'stream' or 'filename' should not be "
+                                     "specified together with 'handlers'")
+            if handlers is None:
+                filename = kwargs.pop("filename", None)
+                mode = kwargs.pop("filemode", 'a')
+                if filename:
+                    if 'b' in mode:
+                        errors = None
+                    else:
+                        encoding = io.text_encoding(encoding)
+                    h = FileHandler(filename, mode,
+                                    encoding=encoding, errors=errors)
+                else:
+                    stream = kwargs.pop("stream", None)
+                    h = StreamHandler(stream)
+                handlers = [h]
+            dfs = kwargs.pop("datefmt", None)
+            style = kwargs.pop("style", '%')
+            if style not in _STYLES:
+                raise ValueError('Style must be one of: %s' % ','.join(
+                                 _STYLES.keys()))
+            fs = kwargs.pop("format", _STYLES[style][1])
+            fmt = Formatter(fs, dfs, style)
+            for h in handlers:
+                if h.formatter is None:
+                    h.setFormatter(fmt)
+                root.addHandler(h)
+            level = kwargs.pop("level", None)
+            if level is not None:
+                root.setLevel(level)
+            if kwargs:
+                keys = ', '.join(kwargs.keys())
+                raise ValueError('Unrecognised argument(s): %s' % keys)
+
+#---------------------------------------------------------------------------
+# Utility functions at module level.
+# Basically delegate everything to the root logger.
+#---------------------------------------------------------------------------
+
+def getLogger(name=None):
+    """
+    Return a logger with the specified name, creating it if necessary.
+
+    If no name is specified, return the root logger.
+    """
+    if not name or isinstance(name, str) and name == root.name:
+        return root
+    return Logger.manager.getLogger(name)
+
+def critical(msg, *args, **kwargs):
+    """
+    Log a message with severity 'CRITICAL' on the root logger. If the logger
+    has no handlers, call basicConfig() to add a console handler with a
+    pre-defined format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.critical(msg, *args, **kwargs)
+
+def fatal(msg, *args, **kwargs):
+    """
+    Don't use this function, use critical() instead.
+    """
+    critical(msg, *args, **kwargs)
+
+def error(msg, *args, **kwargs):
+    """
+    Log a message with severity 'ERROR' on the root logger. If the logger has
+    no handlers, call basicConfig() to add a console handler with a pre-defined
+    format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.error(msg, *args, **kwargs)
+
+def exception(msg, *args, exc_info=True, **kwargs):
+    """
+    Log a message with severity 'ERROR' on the root logger, with exception
+    information. If the logger has no handlers, basicConfig() is called to add
+    a console handler with a pre-defined format.
+    """
+    error(msg, *args, exc_info=exc_info, **kwargs)
+
+def warning(msg, *args, **kwargs):
+    """
+    Log a message with severity 'WARNING' on the root logger. If the logger has
+    no handlers, call basicConfig() to add a console handler with a pre-defined
+    format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.warning(msg, *args, **kwargs)
+
+def warn(msg, *args, **kwargs):
+    warnings.warn("The 'warn' function is deprecated, "
+        "use 'warning' instead", DeprecationWarning, 2)
+    warning(msg, *args, **kwargs)
+
+def info(msg, *args, **kwargs):
+    """
+    Log a message with severity 'INFO' on the root logger. If the logger has
+    no handlers, call basicConfig() to add a console handler with a pre-defined
+    format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.info(msg, *args, **kwargs)
+
+def debug(msg, *args, **kwargs):
+    """
+    Log a message with severity 'DEBUG' on the root logger. If the logger has
+    no handlers, call basicConfig() to add a console handler with a pre-defined
+    format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.debug(msg, *args, **kwargs)
+
+def log(level, msg, *args, **kwargs):
+    """
+    Log 'msg % args' with the integer severity 'level' on the root logger. If
+    the logger has no handlers, call basicConfig() to add a console handler
+    with a pre-defined format.
+    """
+    if len(root.handlers) == 0:
+        basicConfig()
+    root.log(level, msg, *args, **kwargs)
+
+def disable(level=CRITICAL):
+    """
+    Disable all logging calls of severity 'level' and below.
+    """
+    root.manager.disable = level
+    root.manager._clear_cache()
+
+def shutdown(handlerList=_handlerList):
+    """
+    Perform any cleanup actions in the logging system (e.g. flushing
+    buffers).
+
+    Should be called at application exit.
+    """
+    for wr in reversed(handlerList[:]):
+        #errors might occur, for example, if files are locked
+        #we just ignore them if raiseExceptions is not set
+        try:
+            h = wr()
+            if h:
+                try:
+                    h.acquire()
+                    # MemoryHandlers might not want to be flushed on close,
+                    # but circular imports prevent us scoping this to just
+                    # those handlers.  hence the default to True.
+                    if getattr(h, 'flushOnClose', True):
+                        h.flush()
+                    h.close()
+                except (OSError, ValueError):
+                    # Ignore errors which might be caused
+                    # because handlers have been closed but
+                    # references to them are still around at
+                    # application exit.
+                    pass
+                finally:
+                    h.release()
+        except: # ignore everything, as we're shutting down
+            if raiseExceptions:
+                raise
+            #else, swallow
+
+#Let's try and shutdown automatically on application exit...
+import atexit
+atexit.register(shutdown)
+
+# Null handler
+
+class NullHandler(Handler):
+    """
+    This handler does nothing. It's intended to be used to avoid the
+    "No handlers could be found for logger XXX" one-off warning. This is
+    important for library code, which may contain code to log events. If a user
+    of the library does not configure logging, the one-off warning might be
+    produced; to avoid this, the library developer simply needs to instantiate
+    a NullHandler and add it to the top-level logger of the library module or
+    package.
+    """
+    def handle(self, record):
+        """Stub."""
+
+    def emit(self, record):
+        """Stub."""
+
+    def createLock(self):
+        self.lock = None
+
+    def _at_fork_reinit(self):
+        pass
+
+# Warnings integration
+
+_warnings_showwarning = None
+
+def _showwarning(message, category, filename, lineno, file=None, line=None):
+    """
+    Implementation of showwarnings which redirects to logging, which will first
+    check to see if the file parameter is None. If a file is specified, it will
+    delegate to the original warnings implementation of showwarning. Otherwise,
+    it will call warnings.formatwarning and will log the resulting string to a
+    warnings logger named "py.warnings" with level logging.WARNING.
+    """
+    if file is not None:
+        if _warnings_showwarning is not None:
+            _warnings_showwarning(message, category, filename, lineno, file, line)
+    else:
+        s = warnings.formatwarning(message, category, filename, lineno, line)
+        logger = getLogger("py.warnings")
+        if not logger.handlers:
+            logger.addHandler(NullHandler())
+        # bpo-46557: Log str(s) as msg instead of logger.warning("%s", s)
+        # since some log aggregation tools group logs by the msg arg
+        logger.warning(str(s))
+
+def captureWarnings(capture):
+    """
+    If capture is true, redirect all warnings to the logging package.
+    If capture is False, ensure that warnings are not redirected to logging
+    but to their original destinations.
+    """
+    global _warnings_showwarning
+    if capture:
+        if _warnings_showwarning is None:
+            _warnings_showwarning = warnings.showwarning
+            warnings.showwarning = _showwarning
+    else:
+        if _warnings_showwarning is not None:
+            warnings.showwarning = _warnings_showwarning
+            _warnings_showwarning = None
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/config.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/config.py
new file mode 100644
index 0000000000000000000000000000000000000000..3d9aa00fa52d1166b3f6fe0ad8fb9511bc3e1057
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/config.py
@@ -0,0 +1,1077 @@
+# Copyright 2001-2023 by Vinay Sajip. All Rights Reserved.
+#
+# Permission to use, copy, modify, and distribute this software and its
+# documentation for any purpose and without fee is hereby granted,
+# provided that the above copyright notice appear in all copies and that
+# both that copyright notice and this permission notice appear in
+# supporting documentation, and that the name of Vinay Sajip
+# not be used in advertising or publicity pertaining to distribution
+# of the software without specific, written prior permission.
+# VINAY SAJIP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# VINAY SAJIP BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+# ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
+# IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""
+Configuration functions for the logging package for Python. The core package
+is based on PEP 282 and comments thereto in comp.lang.python, and influenced
+by Apache's log4j system.
+
+Copyright (C) 2001-2022 Vinay Sajip. All Rights Reserved.
+
+To use, simply 'import logging' and log away!
+"""
+
+import errno
+import functools
+import io
+import logging
+import logging.handlers
+import os
+import queue
+import re
+import struct
+import threading
+import traceback
+
+from socketserver import ThreadingTCPServer, StreamRequestHandler
+
+
+DEFAULT_LOGGING_CONFIG_PORT = 9030
+
+RESET_ERROR = errno.ECONNRESET
+
+#
+#   The following code implements a socket listener for on-the-fly
+#   reconfiguration of logging.
+#
+#   _listener holds the server object doing the listening
+_listener = None
+
+def fileConfig(fname, defaults=None, disable_existing_loggers=True, encoding=None):
+    """
+    Read the logging configuration from a ConfigParser-format file.
+
+    This can be called several times from an application, allowing an end user
+    the ability to select from various pre-canned configurations (if the
+    developer provides a mechanism to present the choices and load the chosen
+    configuration).
+    """
+    import configparser
+
+    if isinstance(fname, str):
+        if not os.path.exists(fname):
+            raise FileNotFoundError(f"{fname} doesn't exist")
+        elif not os.path.getsize(fname):
+            raise RuntimeError(f'{fname} is an empty file')
+
+    if isinstance(fname, configparser.RawConfigParser):
+        cp = fname
+    else:
+        try:
+            cp = configparser.ConfigParser(defaults)
+            if hasattr(fname, 'readline'):
+                cp.read_file(fname)
+            else:
+                encoding = io.text_encoding(encoding)
+                cp.read(fname, encoding=encoding)
+        except configparser.ParsingError as e:
+            raise RuntimeError(f'{fname} is invalid: {e}')
+
+    formatters = _create_formatters(cp)
+
+    # critical section
+    with logging._lock:
+        _clearExistingHandlers()
+
+        # Handlers add themselves to logging._handlers
+        handlers = _install_handlers(cp, formatters)
+        _install_loggers(cp, handlers, disable_existing_loggers)
+
+
+def _resolve(name):
+    """Resolve a dotted name to a global object."""
+    name = name.split('.')
+    used = name.pop(0)
+    found = __import__(used)
+    for n in name:
+        used = used + '.' + n
+        try:
+            found = getattr(found, n)
+        except AttributeError:
+            __import__(used)
+            found = getattr(found, n)
+    return found
+
+def _strip_spaces(alist):
+    return map(str.strip, alist)
+
+def _create_formatters(cp):
+    """Create and return formatters"""
+    flist = cp["formatters"]["keys"]
+    if not len(flist):
+        return {}
+    flist = flist.split(",")
+    flist = _strip_spaces(flist)
+    formatters = {}
+    for form in flist:
+        sectname = "formatter_%s" % form
+        fs = cp.get(sectname, "format", raw=True, fallback=None)
+        dfs = cp.get(sectname, "datefmt", raw=True, fallback=None)
+        stl = cp.get(sectname, "style", raw=True, fallback='%')
+        defaults = cp.get(sectname, "defaults", raw=True, fallback=None)
+
+        c = logging.Formatter
+        class_name = cp[sectname].get("class")
+        if class_name:
+            c = _resolve(class_name)
+
+        if defaults is not None:
+            defaults = eval(defaults, vars(logging))
+            f = c(fs, dfs, stl, defaults=defaults)
+        else:
+            f = c(fs, dfs, stl)
+        formatters[form] = f
+    return formatters
+
+
+def _install_handlers(cp, formatters):
+    """Install and return handlers"""
+    hlist = cp["handlers"]["keys"]
+    if not len(hlist):
+        return {}
+    hlist = hlist.split(",")
+    hlist = _strip_spaces(hlist)
+    handlers = {}
+    fixups = [] #for inter-handler references
+    for hand in hlist:
+        section = cp["handler_%s" % hand]
+        klass = section["class"]
+        fmt = section.get("formatter", "")
+        try:
+            klass = eval(klass, vars(logging))
+        except (AttributeError, NameError):
+            klass = _resolve(klass)
+        args = section.get("args", '()')
+        args = eval(args, vars(logging))
+        kwargs = section.get("kwargs", '{}')
+        kwargs = eval(kwargs, vars(logging))
+        h = klass(*args, **kwargs)
+        h.name = hand
+        if "level" in section:
+            level = section["level"]
+            h.setLevel(level)
+        if len(fmt):
+            h.setFormatter(formatters[fmt])
+        if issubclass(klass, logging.handlers.MemoryHandler):
+            target = section.get("target", "")
+            if len(target): #the target handler may not be loaded yet, so keep for later...
+                fixups.append((h, target))
+        handlers[hand] = h
+    #now all handlers are loaded, fixup inter-handler references...
+    for h, t in fixups:
+        h.setTarget(handlers[t])
+    return handlers
+
+def _handle_existing_loggers(existing, child_loggers, disable_existing):
+    """
+    When (re)configuring logging, handle loggers which were in the previous
+    configuration but are not in the new configuration. There's no point
+    deleting them as other threads may continue to hold references to them;
+    and by disabling them, you stop them doing any logging.
+
+    However, don't disable children of named loggers, as that's probably not
+    what was intended by the user. Also, allow existing loggers to NOT be
+    disabled if disable_existing is false.
+    """
+    root = logging.root
+    for log in existing:
+        logger = root.manager.loggerDict[log]
+        if log in child_loggers:
+            if not isinstance(logger, logging.PlaceHolder):
+                logger.setLevel(logging.NOTSET)
+                logger.handlers = []
+                logger.propagate = True
+        else:
+            logger.disabled = disable_existing
+
+def _install_loggers(cp, handlers, disable_existing):
+    """Create and install loggers"""
+
+    # configure the root first
+    llist = cp["loggers"]["keys"]
+    llist = llist.split(",")
+    llist = list(_strip_spaces(llist))
+    llist.remove("root")
+    section = cp["logger_root"]
+    root = logging.root
+    log = root
+    if "level" in section:
+        level = section["level"]
+        log.setLevel(level)
+    for h in root.handlers[:]:
+        root.removeHandler(h)
+    hlist = section["handlers"]
+    if len(hlist):
+        hlist = hlist.split(",")
+        hlist = _strip_spaces(hlist)
+        for hand in hlist:
+            log.addHandler(handlers[hand])
+
+    #and now the others...
+    #we don't want to lose the existing loggers,
+    #since other threads may have pointers to them.
+    #existing is set to contain all existing loggers,
+    #and as we go through the new configuration we
+    #remove any which are configured. At the end,
+    #what's left in existing is the set of loggers
+    #which were in the previous configuration but
+    #which are not in the new configuration.
+    existing = list(root.manager.loggerDict.keys())
+    #The list needs to be sorted so that we can
+    #avoid disabling child loggers of explicitly
+    #named loggers. With a sorted list it is easier
+    #to find the child loggers.
+    existing.sort()
+    #We'll keep the list of existing loggers
+    #which are children of named loggers here...
+    child_loggers = []
+    #now set up the new ones...
+    for log in llist:
+        section = cp["logger_%s" % log]
+        qn = section["qualname"]
+        propagate = section.getint("propagate", fallback=1)
+        logger = logging.getLogger(qn)
+        if qn in existing:
+            i = existing.index(qn) + 1 # start with the entry after qn
+            prefixed = qn + "."
+            pflen = len(prefixed)
+            num_existing = len(existing)
+            while i < num_existing:
+                if existing[i][:pflen] == prefixed:
+                    child_loggers.append(existing[i])
+                i += 1
+            existing.remove(qn)
+        if "level" in section:
+            level = section["level"]
+            logger.setLevel(level)
+        for h in logger.handlers[:]:
+            logger.removeHandler(h)
+        logger.propagate = propagate
+        logger.disabled = 0
+        hlist = section["handlers"]
+        if len(hlist):
+            hlist = hlist.split(",")
+            hlist = _strip_spaces(hlist)
+            for hand in hlist:
+                logger.addHandler(handlers[hand])
+
+    #Disable any old loggers. There's no point deleting
+    #them as other threads may continue to hold references
+    #and by disabling them, you stop them doing any logging.
+    #However, don't disable children of named loggers, as that's
+    #probably not what was intended by the user.
+    #for log in existing:
+    #    logger = root.manager.loggerDict[log]
+    #    if log in child_loggers:
+    #        logger.level = logging.NOTSET
+    #        logger.handlers = []
+    #        logger.propagate = 1
+    #    elif disable_existing_loggers:
+    #        logger.disabled = 1
+    _handle_existing_loggers(existing, child_loggers, disable_existing)
+
+
+def _clearExistingHandlers():
+    """Clear and close existing handlers"""
+    logging._handlers.clear()
+    logging.shutdown(logging._handlerList[:])
+    del logging._handlerList[:]
+
+
+IDENTIFIER = re.compile('^[a-z_][a-z0-9_]*$', re.I)
+
+
+def valid_ident(s):
+    m = IDENTIFIER.match(s)
+    if not m:
+        raise ValueError('Not a valid Python identifier: %r' % s)
+    return True
+
+
+class ConvertingMixin(object):
+    """For ConvertingXXX's, this mixin class provides common functions"""
+
+    def convert_with_key(self, key, value, replace=True):
+        result = self.configurator.convert(value)
+        #If the converted value is different, save for next time
+        if value is not result:
+            if replace:
+                self[key] = result
+            if type(result) in (ConvertingDict, ConvertingList,
+                               ConvertingTuple):
+                result.parent = self
+                result.key = key
+        return result
+
+    def convert(self, value):
+        result = self.configurator.convert(value)
+        if value is not result:
+            if type(result) in (ConvertingDict, ConvertingList,
+                               ConvertingTuple):
+                result.parent = self
+        return result
+
+
+# The ConvertingXXX classes are wrappers around standard Python containers,
+# and they serve to convert any suitable values in the container. The
+# conversion converts base dicts, lists and tuples to their wrapped
+# equivalents, whereas strings which match a conversion format are converted
+# appropriately.
+#
+# Each wrapper should have a configurator attribute holding the actual
+# configurator to use for conversion.
+
+class ConvertingDict(dict, ConvertingMixin):
+    """A converting dictionary wrapper."""
+
+    def __getitem__(self, key):
+        value = dict.__getitem__(self, key)
+        return self.convert_with_key(key, value)
+
+    def get(self, key, default=None):
+        value = dict.get(self, key, default)
+        return self.convert_with_key(key, value)
+
+    def pop(self, key, default=None):
+        value = dict.pop(self, key, default)
+        return self.convert_with_key(key, value, replace=False)
+
+class ConvertingList(list, ConvertingMixin):
+    """A converting list wrapper."""
+    def __getitem__(self, key):
+        value = list.__getitem__(self, key)
+        return self.convert_with_key(key, value)
+
+    def pop(self, idx=-1):
+        value = list.pop(self, idx)
+        return self.convert(value)
+
+class ConvertingTuple(tuple, ConvertingMixin):
+    """A converting tuple wrapper."""
+    def __getitem__(self, key):
+        value = tuple.__getitem__(self, key)
+        # Can't replace a tuple entry.
+        return self.convert_with_key(key, value, replace=False)
+
+class BaseConfigurator(object):
+    """
+    The configurator base class which defines some useful defaults.
+    """
+
+    CONVERT_PATTERN = re.compile(r'^(?P<prefix>[a-z]+)://(?P<suffix>.*)$')
+
+    WORD_PATTERN = re.compile(r'^\s*(\w+)\s*')
+    DOT_PATTERN = re.compile(r'^\.\s*(\w+)\s*')
+    INDEX_PATTERN = re.compile(r'^\[([^\[\]]*)\]\s*')
+    DIGIT_PATTERN = re.compile(r'^\d+$')
+
+    value_converters = {
+        'ext' : 'ext_convert',
+        'cfg' : 'cfg_convert',
+    }
+
+    # We might want to use a different one, e.g. importlib
+    importer = staticmethod(__import__)
+
+    def __init__(self, config):
+        self.config = ConvertingDict(config)
+        self.config.configurator = self
+
+    def resolve(self, s):
+        """
+        Resolve strings to objects using standard import and attribute
+        syntax.
+        """
+        name = s.split('.')
+        used = name.pop(0)
+        try:
+            found = self.importer(used)
+            for frag in name:
+                used += '.' + frag
+                try:
+                    found = getattr(found, frag)
+                except AttributeError:
+                    self.importer(used)
+                    found = getattr(found, frag)
+            return found
+        except ImportError as e:
+            v = ValueError('Cannot resolve %r: %s' % (s, e))
+            raise v from e
+
+    def ext_convert(self, value):
+        """Default converter for the ext:// protocol."""
+        return self.resolve(value)
+
+    def cfg_convert(self, value):
+        """Default converter for the cfg:// protocol."""
+        rest = value
+        m = self.WORD_PATTERN.match(rest)
+        if m is None:
+            raise ValueError("Unable to convert %r" % value)
+        else:
+            rest = rest[m.end():]
+            d = self.config[m.groups()[0]]
+            #print d, rest
+            while rest:
+                m = self.DOT_PATTERN.match(rest)
+                if m:
+                    d = d[m.groups()[0]]
+                else:
+                    m = self.INDEX_PATTERN.match(rest)
+                    if m:
+                        idx = m.groups()[0]
+                        if not self.DIGIT_PATTERN.match(idx):
+                            d = d[idx]
+                        else:
+                            try:
+                                n = int(idx) # try as number first (most likely)
+                                d = d[n]
+                            except TypeError:
+                                d = d[idx]
+                if m:
+                    rest = rest[m.end():]
+                else:
+                    raise ValueError('Unable to convert '
+                                     '%r at %r' % (value, rest))
+        #rest should be empty
+        return d
+
+    def convert(self, value):
+        """
+        Convert values to an appropriate type. dicts, lists and tuples are
+        replaced by their converting alternatives. Strings are checked to
+        see if they have a conversion format and are converted if they do.
+        """
+        if not isinstance(value, ConvertingDict) and isinstance(value, dict):
+            value = ConvertingDict(value)
+            value.configurator = self
+        elif not isinstance(value, ConvertingList) and isinstance(value, list):
+            value = ConvertingList(value)
+            value.configurator = self
+        elif not isinstance(value, ConvertingTuple) and\
+                 isinstance(value, tuple) and not hasattr(value, '_fields'):
+            value = ConvertingTuple(value)
+            value.configurator = self
+        elif isinstance(value, str): # str for py3k
+            m = self.CONVERT_PATTERN.match(value)
+            if m:
+                d = m.groupdict()
+                prefix = d['prefix']
+                converter = self.value_converters.get(prefix, None)
+                if converter:
+                    suffix = d['suffix']
+                    converter = getattr(self, converter)
+                    value = converter(suffix)
+        return value
+
+    def configure_custom(self, config):
+        """Configure an object with a user-supplied factory."""
+        c = config.pop('()')
+        if not callable(c):
+            c = self.resolve(c)
+        # Check for valid identifiers
+        kwargs = {k: config[k] for k in config if (k != '.' and valid_ident(k))}
+        result = c(**kwargs)
+        props = config.pop('.', None)
+        if props:
+            for name, value in props.items():
+                setattr(result, name, value)
+        return result
+
+    def as_tuple(self, value):
+        """Utility function which converts lists to tuples."""
+        if isinstance(value, list):
+            value = tuple(value)
+        return value
+
+def _is_queue_like_object(obj):
+    """Check that *obj* implements the Queue API."""
+    if isinstance(obj, (queue.Queue, queue.SimpleQueue)):
+        return True
+    # defer importing multiprocessing as much as possible
+    from multiprocessing.queues import Queue as MPQueue
+    if isinstance(obj, MPQueue):
+        return True
+    # Depending on the multiprocessing start context, we cannot create
+    # a multiprocessing.managers.BaseManager instance 'mm' to get the
+    # runtime type of mm.Queue() or mm.JoinableQueue() (see gh-119819).
+    #
+    # Since we only need an object implementing the Queue API, we only
+    # do a protocol check, but we do not use typing.runtime_checkable()
+    # and typing.Protocol to reduce import time (see gh-121723).
+    #
+    # Ideally, we would have wanted to simply use strict type checking
+    # instead of a protocol-based type checking since the latter does
+    # not check the method signatures.
+    #
+    # Note that only 'put_nowait' and 'get' are required by the logging
+    # queue handler and queue listener (see gh-124653) and that other
+    # methods are either optional or unused.
+    minimal_queue_interface = ['put_nowait', 'get']
+    return all(callable(getattr(obj, method, None))
+               for method in minimal_queue_interface)
+
+class DictConfigurator(BaseConfigurator):
+    """
+    Configure logging using a dictionary-like object to describe the
+    configuration.
+    """
+
+    def configure(self):
+        """Do the configuration."""
+
+        config = self.config
+        if 'version' not in config:
+            raise ValueError("dictionary doesn't specify a version")
+        if config['version'] != 1:
+            raise ValueError("Unsupported version: %s" % config['version'])
+        incremental = config.pop('incremental', False)
+        EMPTY_DICT = {}
+        with logging._lock:
+            if incremental:
+                handlers = config.get('handlers', EMPTY_DICT)
+                for name in handlers:
+                    if name not in logging._handlers:
+                        raise ValueError('No handler found with '
+                                         'name %r'  % name)
+                    else:
+                        try:
+                            handler = logging._handlers[name]
+                            handler_config = handlers[name]
+                            level = handler_config.get('level', None)
+                            if level:
+                                handler.setLevel(logging._checkLevel(level))
+                        except Exception as e:
+                            raise ValueError('Unable to configure handler '
+                                             '%r' % name) from e
+                loggers = config.get('loggers', EMPTY_DICT)
+                for name in loggers:
+                    try:
+                        self.configure_logger(name, loggers[name], True)
+                    except Exception as e:
+                        raise ValueError('Unable to configure logger '
+                                         '%r' % name) from e
+                root = config.get('root', None)
+                if root:
+                    try:
+                        self.configure_root(root, True)
+                    except Exception as e:
+                        raise ValueError('Unable to configure root '
+                                         'logger') from e
+            else:
+                disable_existing = config.pop('disable_existing_loggers', True)
+
+                _clearExistingHandlers()
+
+                # Do formatters first - they don't refer to anything else
+                formatters = config.get('formatters', EMPTY_DICT)
+                for name in formatters:
+                    try:
+                        formatters[name] = self.configure_formatter(
+                                                            formatters[name])
+                    except Exception as e:
+                        raise ValueError('Unable to configure '
+                                         'formatter %r' % name) from e
+                # Next, do filters - they don't refer to anything else, either
+                filters = config.get('filters', EMPTY_DICT)
+                for name in filters:
+                    try:
+                        filters[name] = self.configure_filter(filters[name])
+                    except Exception as e:
+                        raise ValueError('Unable to configure '
+                                         'filter %r' % name) from e
+
+                # Next, do handlers - they refer to formatters and filters
+                # As handlers can refer to other handlers, sort the keys
+                # to allow a deterministic order of configuration
+                handlers = config.get('handlers', EMPTY_DICT)
+                deferred = []
+                for name in sorted(handlers):
+                    try:
+                        handler = self.configure_handler(handlers[name])
+                        handler.name = name
+                        handlers[name] = handler
+                    except Exception as e:
+                        if ' not configured yet' in str(e.__cause__):
+                            deferred.append(name)
+                        else:
+                            raise ValueError('Unable to configure handler '
+                                             '%r' % name) from e
+
+                # Now do any that were deferred
+                for name in deferred:
+                    try:
+                        handler = self.configure_handler(handlers[name])
+                        handler.name = name
+                        handlers[name] = handler
+                    except Exception as e:
+                        raise ValueError('Unable to configure handler '
+                                         '%r' % name) from e
+
+                # Next, do loggers - they refer to handlers and filters
+
+                #we don't want to lose the existing loggers,
+                #since other threads may have pointers to them.
+                #existing is set to contain all existing loggers,
+                #and as we go through the new configuration we
+                #remove any which are configured. At the end,
+                #what's left in existing is the set of loggers
+                #which were in the previous configuration but
+                #which are not in the new configuration.
+                root = logging.root
+                existing = list(root.manager.loggerDict.keys())
+                #The list needs to be sorted so that we can
+                #avoid disabling child loggers of explicitly
+                #named loggers. With a sorted list it is easier
+                #to find the child loggers.
+                existing.sort()
+                #We'll keep the list of existing loggers
+                #which are children of named loggers here...
+                child_loggers = []
+                #now set up the new ones...
+                loggers = config.get('loggers', EMPTY_DICT)
+                for name in loggers:
+                    if name in existing:
+                        i = existing.index(name) + 1 # look after name
+                        prefixed = name + "."
+                        pflen = len(prefixed)
+                        num_existing = len(existing)
+                        while i < num_existing:
+                            if existing[i][:pflen] == prefixed:
+                                child_loggers.append(existing[i])
+                            i += 1
+                        existing.remove(name)
+                    try:
+                        self.configure_logger(name, loggers[name])
+                    except Exception as e:
+                        raise ValueError('Unable to configure logger '
+                                         '%r' % name) from e
+
+                #Disable any old loggers. There's no point deleting
+                #them as other threads may continue to hold references
+                #and by disabling them, you stop them doing any logging.
+                #However, don't disable children of named loggers, as that's
+                #probably not what was intended by the user.
+                #for log in existing:
+                #    logger = root.manager.loggerDict[log]
+                #    if log in child_loggers:
+                #        logger.level = logging.NOTSET
+                #        logger.handlers = []
+                #        logger.propagate = True
+                #    elif disable_existing:
+                #        logger.disabled = True
+                _handle_existing_loggers(existing, child_loggers,
+                                         disable_existing)
+
+                # And finally, do the root logger
+                root = config.get('root', None)
+                if root:
+                    try:
+                        self.configure_root(root)
+                    except Exception as e:
+                        raise ValueError('Unable to configure root '
+                                         'logger') from e
+
+    def configure_formatter(self, config):
+        """Configure a formatter from a dictionary."""
+        if '()' in config:
+            factory = config['()'] # for use in exception handler
+            try:
+                result = self.configure_custom(config)
+            except TypeError as te:
+                if "'format'" not in str(te):
+                    raise
+                # logging.Formatter and its subclasses expect the `fmt`
+                # parameter instead of `format`. Retry passing configuration
+                # with `fmt`.
+                config['fmt'] = config.pop('format')
+                config['()'] = factory
+                result = self.configure_custom(config)
+        else:
+            fmt = config.get('format', None)
+            dfmt = config.get('datefmt', None)
+            style = config.get('style', '%')
+            cname = config.get('class', None)
+            defaults = config.get('defaults', None)
+
+            if not cname:
+                c = logging.Formatter
+            else:
+                c = _resolve(cname)
+
+            kwargs  = {}
+
+            # Add defaults only if it exists.
+            # Prevents TypeError in custom formatter callables that do not
+            # accept it.
+            if defaults is not None:
+                kwargs['defaults'] = defaults
+
+            # A TypeError would be raised if "validate" key is passed in with a formatter callable
+            # that does not accept "validate" as a parameter
+            if 'validate' in config:  # if user hasn't mentioned it, the default will be fine
+                result = c(fmt, dfmt, style, config['validate'], **kwargs)
+            else:
+                result = c(fmt, dfmt, style, **kwargs)
+
+        return result
+
+    def configure_filter(self, config):
+        """Configure a filter from a dictionary."""
+        if '()' in config:
+            result = self.configure_custom(config)
+        else:
+            name = config.get('name', '')
+            result = logging.Filter(name)
+        return result
+
+    def add_filters(self, filterer, filters):
+        """Add filters to a filterer from a list of names."""
+        for f in filters:
+            try:
+                if callable(f) or callable(getattr(f, 'filter', None)):
+                    filter_ = f
+                else:
+                    filter_ = self.config['filters'][f]
+                filterer.addFilter(filter_)
+            except Exception as e:
+                raise ValueError('Unable to add filter %r' % f) from e
+
+    def _configure_queue_handler(self, klass, **kwargs):
+        if 'queue' in kwargs:
+            q = kwargs.pop('queue')
+        else:
+            q = queue.Queue()  # unbounded
+
+        rhl = kwargs.pop('respect_handler_level', False)
+        lklass = kwargs.pop('listener', logging.handlers.QueueListener)
+        handlers = kwargs.pop('handlers', [])
+
+        listener = lklass(q, *handlers, respect_handler_level=rhl)
+        handler = klass(q, **kwargs)
+        handler.listener = listener
+        return handler
+
+    def configure_handler(self, config):
+        """Configure a handler from a dictionary."""
+        config_copy = dict(config)  # for restoring in case of error
+        formatter = config.pop('formatter', None)
+        if formatter:
+            try:
+                formatter = self.config['formatters'][formatter]
+            except Exception as e:
+                raise ValueError('Unable to set formatter '
+                                 '%r' % formatter) from e
+        level = config.pop('level', None)
+        filters = config.pop('filters', None)
+        if '()' in config:
+            c = config.pop('()')
+            if not callable(c):
+                c = self.resolve(c)
+            factory = c
+        else:
+            cname = config.pop('class')
+            if callable(cname):
+                klass = cname
+            else:
+                klass = self.resolve(cname)
+            if issubclass(klass, logging.handlers.MemoryHandler):
+                if 'flushLevel' in config:
+                    config['flushLevel'] = logging._checkLevel(config['flushLevel'])
+                if 'target' in config:
+                    # Special case for handler which refers to another handler
+                    try:
+                        tn = config['target']
+                        th = self.config['handlers'][tn]
+                        if not isinstance(th, logging.Handler):
+                            config.update(config_copy)  # restore for deferred cfg
+                            raise TypeError('target not configured yet')
+                        config['target'] = th
+                    except Exception as e:
+                        raise ValueError('Unable to set target handler %r' % tn) from e
+            elif issubclass(klass, logging.handlers.QueueHandler):
+                # Another special case for handler which refers to other handlers
+                # if 'handlers' not in config:
+                    # raise ValueError('No handlers specified for a QueueHandler')
+                if 'queue' in config:
+                    qspec = config['queue']
+
+                    if isinstance(qspec, str):
+                        q = self.resolve(qspec)
+                        if not callable(q):
+                            raise TypeError('Invalid queue specifier %r' % qspec)
+                        config['queue'] = q()
+                    elif isinstance(qspec, dict):
+                        if '()' not in qspec:
+                            raise TypeError('Invalid queue specifier %r' % qspec)
+                        config['queue'] = self.configure_custom(dict(qspec))
+                    elif not _is_queue_like_object(qspec):
+                        raise TypeError('Invalid queue specifier %r' % qspec)
+
+                if 'listener' in config:
+                    lspec = config['listener']
+                    if isinstance(lspec, type):
+                        if not issubclass(lspec, logging.handlers.QueueListener):
+                            raise TypeError('Invalid listener specifier %r' % lspec)
+                    else:
+                        if isinstance(lspec, str):
+                            listener = self.resolve(lspec)
+                            if isinstance(listener, type) and\
+                                not issubclass(listener, logging.handlers.QueueListener):
+                                raise TypeError('Invalid listener specifier %r' % lspec)
+                        elif isinstance(lspec, dict):
+                            if '()' not in lspec:
+                                raise TypeError('Invalid listener specifier %r' % lspec)
+                            listener = self.configure_custom(dict(lspec))
+                        else:
+                            raise TypeError('Invalid listener specifier %r' % lspec)
+                        if not callable(listener):
+                            raise TypeError('Invalid listener specifier %r' % lspec)
+                        config['listener'] = listener
+                if 'handlers' in config:
+                    hlist = []
+                    try:
+                        for hn in config['handlers']:
+                            h = self.config['handlers'][hn]
+                            if not isinstance(h, logging.Handler):
+                                config.update(config_copy)  # restore for deferred cfg
+                                raise TypeError('Required handler %r '
+                                                'is not configured yet' % hn)
+                            hlist.append(h)
+                    except Exception as e:
+                        raise ValueError('Unable to set required handler %r' % hn) from e
+                    config['handlers'] = hlist
+            elif issubclass(klass, logging.handlers.SMTPHandler) and\
+                'mailhost' in config:
+                config['mailhost'] = self.as_tuple(config['mailhost'])
+            elif issubclass(klass, logging.handlers.SysLogHandler) and\
+                'address' in config:
+                config['address'] = self.as_tuple(config['address'])
+            if issubclass(klass, logging.handlers.QueueHandler):
+                factory = functools.partial(self._configure_queue_handler, klass)
+            else:
+                factory = klass
+        kwargs = {k: config[k] for k in config if (k != '.' and valid_ident(k))}
+        # When deprecation ends for using the 'strm' parameter, remove the
+        # "except TypeError ..."
+        try:
+            result = factory(**kwargs)
+        except TypeError as te:
+            if "'stream'" not in str(te):
+                raise
+            #The argument name changed from strm to stream
+            #Retry with old name.
+            #This is so that code can be used with older Python versions
+            #(e.g. by Django)
+            kwargs['strm'] = kwargs.pop('stream')
+            result = factory(**kwargs)
+
+            import warnings
+            warnings.warn(
+                "Support for custom logging handlers with the 'strm' argument "
+                "is deprecated and scheduled for removal in Python 3.16. "
+                "Define handlers with the 'stream' argument instead.",
+                DeprecationWarning,
+                stacklevel=2,
+            )
+        if formatter:
+            result.setFormatter(formatter)
+        if level is not None:
+            result.setLevel(logging._checkLevel(level))
+        if filters:
+            self.add_filters(result, filters)
+        props = config.pop('.', None)
+        if props:
+            for name, value in props.items():
+                setattr(result, name, value)
+        return result
+
+    def add_handlers(self, logger, handlers):
+        """Add handlers to a logger from a list of names."""
+        for h in handlers:
+            try:
+                logger.addHandler(self.config['handlers'][h])
+            except Exception as e:
+                raise ValueError('Unable to add handler %r' % h) from e
+
+    def common_logger_config(self, logger, config, incremental=False):
+        """
+        Perform configuration which is common to root and non-root loggers.
+        """
+        level = config.get('level', None)
+        if level is not None:
+            logger.setLevel(logging._checkLevel(level))
+        if not incremental:
+            #Remove any existing handlers
+            for h in logger.handlers[:]:
+                logger.removeHandler(h)
+            handlers = config.get('handlers', None)
+            if handlers:
+                self.add_handlers(logger, handlers)
+            filters = config.get('filters', None)
+            if filters:
+                self.add_filters(logger, filters)
+
+    def configure_logger(self, name, config, incremental=False):
+        """Configure a non-root logger from a dictionary."""
+        logger = logging.getLogger(name)
+        self.common_logger_config(logger, config, incremental)
+        logger.disabled = False
+        propagate = config.get('propagate', None)
+        if propagate is not None:
+            logger.propagate = propagate
+
+    def configure_root(self, config, incremental=False):
+        """Configure a root logger from a dictionary."""
+        root = logging.getLogger()
+        self.common_logger_config(root, config, incremental)
+
+dictConfigClass = DictConfigurator
+
+def dictConfig(config):
+    """Configure logging using a dictionary."""
+    dictConfigClass(config).configure()
+
+
+def listen(port=DEFAULT_LOGGING_CONFIG_PORT, verify=None):
+    """
+    Start up a socket server on the specified port, and listen for new
+    configurations.
+
+    These will be sent as a file suitable for processing by fileConfig().
+    Returns a Thread object on which you can call start() to start the server,
+    and which you can join() when appropriate. To stop the server, call
+    stopListening().
+
+    Use the ``verify`` argument to verify any bytes received across the wire
+    from a client. If specified, it should be a callable which receives a
+    single argument - the bytes of configuration data received across the
+    network - and it should return either ``None``, to indicate that the
+    passed in bytes could not be verified and should be discarded, or a
+    byte string which is then passed to the configuration machinery as
+    normal. Note that you can return transformed bytes, e.g. by decrypting
+    the bytes passed in.
+    """
+
+    class ConfigStreamHandler(StreamRequestHandler):
+        """
+        Handler for a logging configuration request.
+
+        It expects a completely new logging configuration and uses fileConfig
+        to install it.
+        """
+        def handle(self):
+            """
+            Handle a request.
+
+            Each request is expected to be a 4-byte length, packed using
+            struct.pack(">L", n), followed by the config file.
+            Uses fileConfig() to do the grunt work.
+            """
+            try:
+                conn = self.connection
+                chunk = conn.recv(4)
+                if len(chunk) == 4:
+                    slen = struct.unpack(">L", chunk)[0]
+                    chunk = self.connection.recv(slen)
+                    while len(chunk) < slen:
+                        chunk = chunk + conn.recv(slen - len(chunk))
+                    if self.server.verify is not None:
+                        chunk = self.server.verify(chunk)
+                    if chunk is not None:   # verified, can process
+                        chunk = chunk.decode("utf-8")
+                        try:
+                            import json
+                            d =json.loads(chunk)
+                            assert isinstance(d, dict)
+                            dictConfig(d)
+                        except Exception:
+                            #Apply new configuration.
+
+                            file = io.StringIO(chunk)
+                            try:
+                                fileConfig(file)
+                            except Exception:
+                                traceback.print_exc()
+                    if self.server.ready:
+                        self.server.ready.set()
+            except OSError as e:
+                if e.errno != RESET_ERROR:
+                    raise
+
+    class ConfigSocketReceiver(ThreadingTCPServer):
+        """
+        A simple TCP socket-based logging config receiver.
+        """
+
+        allow_reuse_address = True
+        allow_reuse_port = False
+
+        def __init__(self, host='localhost', port=DEFAULT_LOGGING_CONFIG_PORT,
+                     handler=None, ready=None, verify=None):
+            ThreadingTCPServer.__init__(self, (host, port), handler)
+            with logging._lock:
+                self.abort = 0
+            self.timeout = 1
+            self.ready = ready
+            self.verify = verify
+
+        def serve_until_stopped(self):
+            import select
+            abort = 0
+            while not abort:
+                rd, wr, ex = select.select([self.socket.fileno()],
+                                           [], [],
+                                           self.timeout)
+                if rd:
+                    self.handle_request()
+                with logging._lock:
+                    abort = self.abort
+            self.server_close()
+
+    class Server(threading.Thread):
+
+        def __init__(self, rcvr, hdlr, port, verify):
+            super(Server, self).__init__()
+            self.rcvr = rcvr
+            self.hdlr = hdlr
+            self.port = port
+            self.verify = verify
+            self.ready = threading.Event()
+
+        def run(self):
+            server = self.rcvr(port=self.port, handler=self.hdlr,
+                               ready=self.ready,
+                               verify=self.verify)
+            if self.port == 0:
+                self.port = server.server_address[1]
+            self.ready.set()
+            global _listener
+            with logging._lock:
+                _listener = server
+            server.serve_until_stopped()
+
+    return Server(ConfigSocketReceiver, ConfigStreamHandler, port, verify)
+
+def stopListening():
+    """
+    Stop the listening server which was created with a call to listen().
+    """
+    global _listener
+    with logging._lock:
+        if _listener:
+            _listener.abort = 1
+            _listener = None
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/handlers.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/handlers.py
new file mode 100644
index 0000000000000000000000000000000000000000..4a07258f8d6d07ef487d0f3d2773109be8bf720d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/logging/handlers.py
@@ -0,0 +1,1645 @@
+# Copyright 2001-2021 by Vinay Sajip. All Rights Reserved.
+#
+# Permission to use, copy, modify, and distribute this software and its
+# documentation for any purpose and without fee is hereby granted,
+# provided that the above copyright notice appear in all copies and that
+# both that copyright notice and this permission notice appear in
+# supporting documentation, and that the name of Vinay Sajip
+# not be used in advertising or publicity pertaining to distribution
+# of the software without specific, written prior permission.
+# VINAY SAJIP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+# VINAY SAJIP BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+# ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
+# IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+"""
+Additional handlers for the logging package for Python. The core package is
+based on PEP 282 and comments thereto in comp.lang.python.
+
+Copyright (C) 2001-2021 Vinay Sajip. All Rights Reserved.
+
+To use, simply 'import logging.handlers' and log away!
+"""
+
+import copy
+import io
+import logging
+import os
+import pickle
+import queue
+import re
+import socket
+import struct
+import threading
+import time
+
+#
+# Some constants...
+#
+
+DEFAULT_TCP_LOGGING_PORT    = 9020
+DEFAULT_UDP_LOGGING_PORT    = 9021
+DEFAULT_HTTP_LOGGING_PORT   = 9022
+DEFAULT_SOAP_LOGGING_PORT   = 9023
+SYSLOG_UDP_PORT             = 514
+SYSLOG_TCP_PORT             = 514
+
+_MIDNIGHT = 24 * 60 * 60  # number of seconds in a day
+
+class BaseRotatingHandler(logging.FileHandler):
+    """
+    Base class for handlers that rotate log files at a certain point.
+    Not meant to be instantiated directly.  Instead, use RotatingFileHandler
+    or TimedRotatingFileHandler.
+    """
+    namer = None
+    rotator = None
+
+    def __init__(self, filename, mode, encoding=None, delay=False, errors=None):
+        """
+        Use the specified filename for streamed logging
+        """
+        logging.FileHandler.__init__(self, filename, mode=mode,
+                                     encoding=encoding, delay=delay,
+                                     errors=errors)
+        self.mode = mode
+        self.encoding = encoding
+        self.errors = errors
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Output the record to the file, catering for rollover as described
+        in doRollover().
+        """
+        try:
+            if self.shouldRollover(record):
+                self.doRollover()
+            logging.FileHandler.emit(self, record)
+        except Exception:
+            self.handleError(record)
+
+    def rotation_filename(self, default_name):
+        """
+        Modify the filename of a log file when rotating.
+
+        This is provided so that a custom filename can be provided.
+
+        The default implementation calls the 'namer' attribute of the
+        handler, if it's callable, passing the default name to
+        it. If the attribute isn't callable (the default is None), the name
+        is returned unchanged.
+
+        :param default_name: The default name for the log file.
+        """
+        if not callable(self.namer):
+            result = default_name
+        else:
+            result = self.namer(default_name)
+        return result
+
+    def rotate(self, source, dest):
+        """
+        When rotating, rotate the current log.
+
+        The default implementation calls the 'rotator' attribute of the
+        handler, if it's callable, passing the source and dest arguments to
+        it. If the attribute isn't callable (the default is None), the source
+        is simply renamed to the destination.
+
+        :param source: The source filename. This is normally the base
+                       filename, e.g. 'test.log'
+        :param dest:   The destination filename. This is normally
+                       what the source is rotated to, e.g. 'test.log.1'.
+        """
+        if not callable(self.rotator):
+            # Issue 18940: A file may not have been created if delay is True.
+            if os.path.exists(source):
+                os.rename(source, dest)
+        else:
+            self.rotator(source, dest)
+
+class RotatingFileHandler(BaseRotatingHandler):
+    """
+    Handler for logging to a set of files, which switches from one file
+    to the next when the current file reaches a certain size.
+    """
+    def __init__(self, filename, mode='a', maxBytes=0, backupCount=0,
+                 encoding=None, delay=False, errors=None):
+        """
+        Open the specified file and use it as the stream for logging.
+
+        By default, the file grows indefinitely. You can specify particular
+        values of maxBytes and backupCount to allow the file to rollover at
+        a predetermined size.
+
+        Rollover occurs whenever the current log file is nearly maxBytes in
+        length. If backupCount is >= 1, the system will successively create
+        new files with the same pathname as the base file, but with extensions
+        ".1", ".2" etc. appended to it. For example, with a backupCount of 5
+        and a base file name of "app.log", you would get "app.log",
+        "app.log.1", "app.log.2", ... through to "app.log.5". The file being
+        written to is always "app.log" - when it gets filled up, it is closed
+        and renamed to "app.log.1", and if files "app.log.1", "app.log.2" etc.
+        exist, then they are renamed to "app.log.2", "app.log.3" etc.
+        respectively.
+
+        If maxBytes is zero, rollover never occurs.
+        """
+        # If rotation/rollover is wanted, it doesn't make sense to use another
+        # mode. If for example 'w' were specified, then if there were multiple
+        # runs of the calling application, the logs from previous runs would be
+        # lost if the 'w' is respected, because the log file would be truncated
+        # on each run.
+        if maxBytes > 0:
+            mode = 'a'
+        if "b" not in mode:
+            encoding = io.text_encoding(encoding)
+        BaseRotatingHandler.__init__(self, filename, mode, encoding=encoding,
+                                     delay=delay, errors=errors)
+        self.maxBytes = maxBytes
+        self.backupCount = backupCount
+
+    def doRollover(self):
+        """
+        Do a rollover, as described in __init__().
+        """
+        if self.stream:
+            self.stream.close()
+            self.stream = None
+        if self.backupCount > 0:
+            for i in range(self.backupCount - 1, 0, -1):
+                sfn = self.rotation_filename("%s.%d" % (self.baseFilename, i))
+                dfn = self.rotation_filename("%s.%d" % (self.baseFilename,
+                                                        i + 1))
+                if os.path.exists(sfn):
+                    if os.path.exists(dfn):
+                        os.remove(dfn)
+                    os.rename(sfn, dfn)
+            dfn = self.rotation_filename(self.baseFilename + ".1")
+            if os.path.exists(dfn):
+                os.remove(dfn)
+            self.rotate(self.baseFilename, dfn)
+        if not self.delay:
+            self.stream = self._open()
+
+    def shouldRollover(self, record):
+        """
+        Determine if rollover should occur.
+
+        Basically, see if the supplied record would cause the file to exceed
+        the size limit we have.
+        """
+        if self.stream is None:                 # delay was set...
+            self.stream = self._open()
+        if self.maxBytes > 0:                   # are we rolling over?
+            try:
+                pos = self.stream.tell()
+            except io.UnsupportedOperation:
+                # gh-143237: Never rollover a named pipe.
+                return False
+            if not pos:
+                # gh-116263: Never rollover an empty file
+                return False
+            msg = "%s\n" % self.format(record)
+            if pos + len(msg) >= self.maxBytes:
+                # See bpo-45401: Never rollover anything other than regular files
+                if os.path.exists(self.baseFilename) and not os.path.isfile(self.baseFilename):
+                    return False
+                return True
+        return False
+
+class TimedRotatingFileHandler(BaseRotatingHandler):
+    """
+    Handler for logging to a file, rotating the log file at certain timed
+    intervals.
+
+    If backupCount is > 0, when rollover is done, no more than backupCount
+    files are kept - the oldest ones are deleted.
+    """
+    def __init__(self, filename, when='h', interval=1, backupCount=0,
+                 encoding=None, delay=False, utc=False, atTime=None,
+                 errors=None):
+        encoding = io.text_encoding(encoding)
+        BaseRotatingHandler.__init__(self, filename, 'a', encoding=encoding,
+                                     delay=delay, errors=errors)
+        self.when = when.upper()
+        self.backupCount = backupCount
+        self.utc = utc
+        self.atTime = atTime
+        # Calculate the real rollover interval, which is just the number of
+        # seconds between rollovers.  Also set the filename suffix used when
+        # a rollover occurs.  Current 'when' events supported:
+        # S - Seconds
+        # M - Minutes
+        # H - Hours
+        # D - Days
+        # midnight - roll over at midnight
+        # W{0-6} - roll over on a certain day; 0 - Monday
+        #
+        # Case of the 'when' specifier is not important; lower or upper case
+        # will work.
+        if self.when == 'S':
+            self.interval = 1 # one second
+            self.suffix = "%Y-%m-%d_%H-%M-%S"
+            extMatch = r"(?<!\d)\d{4}-\d{2}-\d{2}_\d{2}-\d{2}-\d{2}(?!\d)"
+        elif self.when == 'M':
+            self.interval = 60 # one minute
+            self.suffix = "%Y-%m-%d_%H-%M"
+            extMatch = r"(?<!\d)\d{4}-\d{2}-\d{2}_\d{2}-\d{2}(?!\d)"
+        elif self.when == 'H':
+            self.interval = 60 * 60 # one hour
+            self.suffix = "%Y-%m-%d_%H"
+            extMatch = r"(?<!\d)\d{4}-\d{2}-\d{2}_\d{2}(?!\d)"
+        elif self.when == 'D' or self.when == 'MIDNIGHT':
+            self.interval = 60 * 60 * 24 # one day
+            self.suffix = "%Y-%m-%d"
+            extMatch = r"(?<!\d)\d{4}-\d{2}-\d{2}(?!\d)"
+        elif self.when.startswith('W'):
+            self.interval = 60 * 60 * 24 * 7 # one week
+            if len(self.when) != 2:
+                raise ValueError("You must specify a day for weekly rollover from 0 to 6 (0 is Monday): %s" % self.when)
+            if self.when[1] < '0' or self.when[1] > '6':
+                raise ValueError("Invalid day specified for weekly rollover: %s" % self.when)
+            self.dayOfWeek = int(self.when[1])
+            self.suffix = "%Y-%m-%d"
+            extMatch = r"(?<!\d)\d{4}-\d{2}-\d{2}(?!\d)"
+        else:
+            raise ValueError("Invalid rollover interval specified: %s" % self.when)
+
+        # extMatch is a pattern for matching a datetime suffix in a file name.
+        # After custom naming, it is no longer guaranteed to be separated by
+        # periods from other parts of the filename.  The lookup statements
+        # (?<!\d) and (?!\d) ensure that the datetime suffix (which itself
+        # starts and ends with digits) is not preceded or followed by digits.
+        # This reduces the number of false matches and improves performance.
+        self.extMatch = re.compile(extMatch, re.ASCII)
+        self.interval = self.interval * interval # multiply by units requested
+        # The following line added because the filename passed in could be a
+        # path object (see Issue #27493), but self.baseFilename will be a string
+        filename = self.baseFilename
+        if os.path.exists(filename):
+            t = int(os.stat(filename).st_mtime)
+        else:
+            t = int(time.time())
+        self.rolloverAt = self.computeRollover(t)
+
+    def computeRollover(self, currentTime):
+        """
+        Work out the rollover time based on the specified time.
+        """
+        result = currentTime + self.interval
+        # If we are rolling over at midnight or weekly, then the interval is already known.
+        # What we need to figure out is WHEN the next interval is.  In other words,
+        # if you are rolling over at midnight, then your base interval is 1 day,
+        # but you want to start that one day clock at midnight, not now.  So, we
+        # have to fudge the rolloverAt value in order to trigger the first rollover
+        # at the right time.  After that, the regular interval will take care of
+        # the rest.  Note that this code doesn't care about leap seconds. :)
+        if self.when == 'MIDNIGHT' or self.when.startswith('W'):
+            # This could be done with less code, but I wanted it to be clear
+            if self.utc:
+                t = time.gmtime(currentTime)
+            else:
+                t = time.localtime(currentTime)
+            currentHour = t[3]
+            currentMinute = t[4]
+            currentSecond = t[5]
+            currentDay = t[6]
+            # r is the number of seconds left between now and the next rotation
+            if self.atTime is None:
+                rotate_ts = _MIDNIGHT
+            else:
+                rotate_ts = ((self.atTime.hour * 60 + self.atTime.minute)*60 +
+                    self.atTime.second)
+
+            r = rotate_ts - ((currentHour * 60 + currentMinute) * 60 +
+                currentSecond)
+            if r <= 0:
+                # Rotate time is before the current time (for example when
+                # self.rotateAt is 13:45 and it now 14:15), rotation is
+                # tomorrow.
+                r += _MIDNIGHT
+                currentDay = (currentDay + 1) % 7
+            result = currentTime + r
+            # If we are rolling over on a certain day, add in the number of days until
+            # the next rollover, but offset by 1 since we just calculated the time
+            # until the next day starts.  There are three cases:
+            # Case 1) The day to rollover is today; in this case, do nothing
+            # Case 2) The day to rollover is further in the interval (i.e., today is
+            #         day 2 (Wednesday) and rollover is on day 6 (Sunday).  Days to
+            #         next rollover is simply 6 - 2 - 1, or 3.
+            # Case 3) The day to rollover is behind us in the interval (i.e., today
+            #         is day 5 (Saturday) and rollover is on day 3 (Thursday).
+            #         Days to rollover is 6 - 5 + 3, or 4.  In this case, it's the
+            #         number of days left in the current week (1) plus the number
+            #         of days in the next week until the rollover day (3).
+            # The calculations described in 2) and 3) above need to have a day added.
+            # This is because the above time calculation takes us to midnight on this
+            # day, i.e. the start of the next day.
+            if self.when.startswith('W'):
+                day = currentDay # 0 is Monday
+                if day != self.dayOfWeek:
+                    if day < self.dayOfWeek:
+                        daysToWait = self.dayOfWeek - day
+                    else:
+                        daysToWait = 6 - day + self.dayOfWeek + 1
+                    result += daysToWait * _MIDNIGHT
+                result += self.interval - _MIDNIGHT * 7
+            else:
+                result += self.interval - _MIDNIGHT
+            if not self.utc:
+                dstNow = t[-1]
+                dstAtRollover = time.localtime(result)[-1]
+                if dstNow != dstAtRollover:
+                    if not dstNow:  # DST kicks in before next rollover, so we need to deduct an hour
+                        addend = -3600
+                        if not time.localtime(result-3600)[-1]:
+                            addend = 0
+                    else:           # DST bows out before next rollover, so we need to add an hour
+                        addend = 3600
+                    result += addend
+        return result
+
+    def shouldRollover(self, record):
+        """
+        Determine if rollover should occur.
+
+        record is not used, as we are just comparing times, but it is needed so
+        the method signatures are the same
+        """
+        t = int(time.time())
+        if t >= self.rolloverAt:
+            # See #89564: Never rollover anything other than regular files
+            if os.path.exists(self.baseFilename) and not os.path.isfile(self.baseFilename):
+                # The file is not a regular file, so do not rollover, but do
+                # set the next rollover time to avoid repeated checks.
+                self.rolloverAt = self.computeRollover(t)
+                return False
+
+            return True
+        return False
+
+    def getFilesToDelete(self):
+        """
+        Determine the files to delete when rolling over.
+
+        More specific than the earlier method, which just used glob.glob().
+        """
+        dirName, baseName = os.path.split(self.baseFilename)
+        fileNames = os.listdir(dirName)
+        result = []
+        if self.namer is None:
+            prefix = baseName + '.'
+            plen = len(prefix)
+            for fileName in fileNames:
+                if fileName[:plen] == prefix:
+                    suffix = fileName[plen:]
+                    if self.extMatch.fullmatch(suffix):
+                        result.append(os.path.join(dirName, fileName))
+        else:
+            for fileName in fileNames:
+                # Our files could be just about anything after custom naming,
+                # but they should contain the datetime suffix.
+                # Try to find the datetime suffix in the file name and verify
+                # that the file name can be generated by this handler.
+                m = self.extMatch.search(fileName)
+                while m:
+                    dfn = self.namer(self.baseFilename + "." + m[0])
+                    if os.path.basename(dfn) == fileName:
+                        result.append(os.path.join(dirName, fileName))
+                        break
+                    m = self.extMatch.search(fileName, m.start() + 1)
+
+        if len(result) < self.backupCount:
+            result = []
+        else:
+            result.sort()
+            result = result[:len(result) - self.backupCount]
+        return result
+
+    def doRollover(self):
+        """
+        do a rollover; in this case, a date/time stamp is appended to the filename
+        when the rollover happens.  However, you want the file to be named for the
+        start of the interval, not the current time.  If there is a backup count,
+        then we have to get a list of matching filenames, sort them and remove
+        the one with the oldest suffix.
+        """
+        # get the time that this sequence started at and make it a TimeTuple
+        currentTime = int(time.time())
+        t = self.rolloverAt - self.interval
+        if self.utc:
+            timeTuple = time.gmtime(t)
+        else:
+            timeTuple = time.localtime(t)
+            dstNow = time.localtime(currentTime)[-1]
+            dstThen = timeTuple[-1]
+            if dstNow != dstThen:
+                if dstNow:
+                    addend = 3600
+                else:
+                    addend = -3600
+                timeTuple = time.localtime(t + addend)
+        dfn = self.rotation_filename(self.baseFilename + "." +
+                                     time.strftime(self.suffix, timeTuple))
+        if os.path.exists(dfn):
+            # Already rolled over.
+            return
+
+        if self.stream:
+            self.stream.close()
+            self.stream = None
+        self.rotate(self.baseFilename, dfn)
+        if self.backupCount > 0:
+            for s in self.getFilesToDelete():
+                os.remove(s)
+        if not self.delay:
+            self.stream = self._open()
+        self.rolloverAt = self.computeRollover(currentTime)
+
+class WatchedFileHandler(logging.FileHandler):
+    """
+    A handler for logging to a file, which watches the file
+    to see if it has changed while in use. This can happen because of
+    usage of programs such as newsyslog and logrotate which perform
+    log file rotation. This handler, intended for use under Unix,
+    watches the file to see if it has changed since the last emit.
+    (A file has changed if its device or inode have changed.)
+    If it has changed, the old file stream is closed, and the file
+    opened to get a new stream.
+
+    This handler is not appropriate for use under Windows, because
+    under Windows open files cannot be moved or renamed - logging
+    opens the files with exclusive locks - and so there is no need
+    for such a handler.
+
+    This handler is based on a suggestion and patch by Chad J.
+    Schroeder.
+    """
+    def __init__(self, filename, mode='a', encoding=None, delay=False,
+                 errors=None):
+        if "b" not in mode:
+            encoding = io.text_encoding(encoding)
+        logging.FileHandler.__init__(self, filename, mode=mode,
+                                     encoding=encoding, delay=delay,
+                                     errors=errors)
+        self.dev, self.ino = -1, -1
+        self._statstream()
+
+    def _statstream(self):
+        if self.stream is None:
+            return
+        sres = os.fstat(self.stream.fileno())
+        self.dev = sres.st_dev
+        self.ino = sres.st_ino
+
+    def reopenIfNeeded(self):
+        """
+        Reopen log file if needed.
+
+        Checks if the underlying file has changed, and if it
+        has, close the old stream and reopen the file to get the
+        current stream.
+        """
+        if self.stream is None:
+            return
+
+        # Reduce the chance of race conditions by stat'ing by path only
+        # once and then fstat'ing our new fd if we opened a new log stream.
+        # See issue #14632: Thanks to John Mulligan for the problem report
+        # and patch.
+        try:
+            # stat the file by path, checking for existence
+            sres = os.stat(self.baseFilename)
+
+            # compare file system stat with that of our stream file handle
+            reopen = (sres.st_dev != self.dev or sres.st_ino != self.ino)
+        except FileNotFoundError:
+            reopen = True
+
+        if not reopen:
+            return
+
+        # we have an open file handle, clean it up
+        self.stream.flush()
+        self.stream.close()
+        self.stream = None  # See Issue #21742: _open () might fail.
+
+        # open a new file handle and get new stat info from that fd
+        self.stream = self._open()
+        self._statstream()
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        If underlying file has changed, reopen the file before emitting the
+        record to it.
+        """
+        self.reopenIfNeeded()
+        logging.FileHandler.emit(self, record)
+
+
+class SocketHandler(logging.Handler):
+    """
+    A handler class which writes logging records, in pickle format, to
+    a streaming socket. The socket is kept open across logging calls.
+    If the peer resets it, an attempt is made to reconnect on the next call.
+    The pickle which is sent is that of the LogRecord's attribute dictionary
+    (__dict__), so that the receiver does not need to have the logging module
+    installed in order to process the logging event.
+
+    To unpickle the record at the receiving end into a LogRecord, use the
+    makeLogRecord function.
+    """
+
+    def __init__(self, host, port):
+        """
+        Initializes the handler with a specific host address and port.
+
+        When the attribute *closeOnError* is set to True - if a socket error
+        occurs, the socket is silently closed and then reopened on the next
+        logging call.
+        """
+        logging.Handler.__init__(self)
+        self.host = host
+        self.port = port
+        if port is None:
+            self.address = host
+        else:
+            self.address = (host, port)
+        self.sock = None
+        self.closeOnError = False
+        self.retryTime = None
+        #
+        # Exponential backoff parameters.
+        #
+        self.retryStart = 1.0
+        self.retryMax = 30.0
+        self.retryFactor = 2.0
+
+    def makeSocket(self, timeout=1):
+        """
+        A factory method which allows subclasses to define the precise
+        type of socket they want.
+        """
+        if self.port is not None:
+            result = socket.create_connection(self.address, timeout=timeout)
+        else:
+            result = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+            result.settimeout(timeout)
+            try:
+                result.connect(self.address)
+            except OSError:
+                result.close()  # Issue 19182
+                raise
+        return result
+
+    def createSocket(self):
+        """
+        Try to create a socket, using an exponential backoff with
+        a max retry time. Thanks to Robert Olson for the original patch
+        (SF #815911) which has been slightly refactored.
+        """
+        now = time.time()
+        # Either retryTime is None, in which case this
+        # is the first time back after a disconnect, or
+        # we've waited long enough.
+        if self.retryTime is None:
+            attempt = True
+        else:
+            attempt = (now >= self.retryTime)
+        if attempt:
+            try:
+                self.sock = self.makeSocket()
+                self.retryTime = None # next time, no delay before trying
+            except OSError:
+                #Creation failed, so set the retry time and return.
+                if self.retryTime is None:
+                    self.retryPeriod = self.retryStart
+                else:
+                    self.retryPeriod = self.retryPeriod * self.retryFactor
+                    if self.retryPeriod > self.retryMax:
+                        self.retryPeriod = self.retryMax
+                self.retryTime = now + self.retryPeriod
+
+    def send(self, s):
+        """
+        Send a pickled string to the socket.
+
+        This function allows for partial sends which can happen when the
+        network is busy.
+        """
+        if self.sock is None:
+            self.createSocket()
+        #self.sock can be None either because we haven't reached the retry
+        #time yet, or because we have reached the retry time and retried,
+        #but are still unable to connect.
+        if self.sock:
+            try:
+                self.sock.sendall(s)
+            except OSError: #pragma: no cover
+                self.sock.close()
+                self.sock = None  # so we can call createSocket next time
+
+    def makePickle(self, record):
+        """
+        Pickles the record in binary format with a length prefix, and
+        returns it ready for transmission across the socket.
+        """
+        ei = record.exc_info
+        if ei:
+            # just to get traceback text into record.exc_text ...
+            dummy = self.format(record)
+        # See issue #14436: If msg or args are objects, they may not be
+        # available on the receiving end. So we convert the msg % args
+        # to a string, save it as msg and zap the args.
+        d = dict(record.__dict__)
+        d['msg'] = record.getMessage()
+        d['args'] = None
+        d['exc_info'] = None
+        # Issue #25685: delete 'message' if present: redundant with 'msg'
+        d.pop('message', None)
+        s = pickle.dumps(d, 1)
+        slen = struct.pack(">L", len(s))
+        return slen + s
+
+    def handleError(self, record):
+        """
+        Handle an error during logging.
+
+        An error has occurred during logging. Most likely cause -
+        connection lost. Close the socket so that we can retry on the
+        next event.
+        """
+        if self.closeOnError and self.sock:
+            self.sock.close()
+            self.sock = None        #try to reconnect next time
+        else:
+            logging.Handler.handleError(self, record)
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Pickles the record and writes it to the socket in binary format.
+        If there is an error with the socket, silently drop the packet.
+        If there was a problem with the socket, re-establishes the
+        socket.
+        """
+        try:
+            s = self.makePickle(record)
+            self.send(s)
+        except Exception:
+            self.handleError(record)
+
+    def close(self):
+        """
+        Closes the socket.
+        """
+        with self.lock:
+            sock = self.sock
+            if sock:
+                self.sock = None
+                sock.close()
+            logging.Handler.close(self)
+
+class DatagramHandler(SocketHandler):
+    """
+    A handler class which writes logging records, in pickle format, to
+    a datagram socket.  The pickle which is sent is that of the LogRecord's
+    attribute dictionary (__dict__), so that the receiver does not need to
+    have the logging module installed in order to process the logging event.
+
+    To unpickle the record at the receiving end into a LogRecord, use the
+    makeLogRecord function.
+
+    """
+    def __init__(self, host, port):
+        """
+        Initializes the handler with a specific host address and port.
+        """
+        SocketHandler.__init__(self, host, port)
+        self.closeOnError = False
+
+    def makeSocket(self):
+        """
+        The factory method of SocketHandler is here overridden to create
+        a UDP socket (SOCK_DGRAM).
+        """
+        if self.port is None:
+            family = socket.AF_UNIX
+        else:
+            family = socket.AF_INET
+        s = socket.socket(family, socket.SOCK_DGRAM)
+        return s
+
+    def send(self, s):
+        """
+        Send a pickled string to a socket.
+
+        This function no longer allows for partial sends which can happen
+        when the network is busy - UDP does not guarantee delivery and
+        can deliver packets out of sequence.
+        """
+        if self.sock is None:
+            self.createSocket()
+        self.sock.sendto(s, self.address)
+
+class SysLogHandler(logging.Handler):
+    """
+    A handler class which sends formatted logging records to a syslog
+    server. Based on Sam Rushing's syslog module:
+    http://www.nightmare.com/squirl/python-ext/misc/syslog.py
+    Contributed by Nicolas Untz (after which minor refactoring changes
+    have been made).
+    """
+
+    # from <linux/sys/syslog.h>:
+    # ======================================================================
+    # priorities/facilities are encoded into a single 32-bit quantity, where
+    # the bottom 3 bits are the priority (0-7) and the top 28 bits are the
+    # facility (0-big number). Both the priorities and the facilities map
+    # roughly one-to-one to strings in the syslogd(8) source code.  This
+    # mapping is included in this file.
+    #
+    # priorities (these are ordered)
+
+    LOG_EMERG     = 0       #  system is unusable
+    LOG_ALERT     = 1       #  action must be taken immediately
+    LOG_CRIT      = 2       #  critical conditions
+    LOG_ERR       = 3       #  error conditions
+    LOG_WARNING   = 4       #  warning conditions
+    LOG_NOTICE    = 5       #  normal but significant condition
+    LOG_INFO      = 6       #  informational
+    LOG_DEBUG     = 7       #  debug-level messages
+
+    #  facility codes
+    LOG_KERN      = 0       #  kernel messages
+    LOG_USER      = 1       #  random user-level messages
+    LOG_MAIL      = 2       #  mail system
+    LOG_DAEMON    = 3       #  system daemons
+    LOG_AUTH      = 4       #  security/authorization messages
+    LOG_SYSLOG    = 5       #  messages generated internally by syslogd
+    LOG_LPR       = 6       #  line printer subsystem
+    LOG_NEWS      = 7       #  network news subsystem
+    LOG_UUCP      = 8       #  UUCP subsystem
+    LOG_CRON      = 9       #  clock daemon
+    LOG_AUTHPRIV  = 10      #  security/authorization messages (private)
+    LOG_FTP       = 11      #  FTP daemon
+    LOG_NTP       = 12      #  NTP subsystem
+    LOG_SECURITY  = 13      #  Log audit
+    LOG_CONSOLE   = 14      #  Log alert
+    LOG_SOLCRON   = 15      #  Scheduling daemon (Solaris)
+
+    #  other codes through 15 reserved for system use
+    LOG_LOCAL0    = 16      #  reserved for local use
+    LOG_LOCAL1    = 17      #  reserved for local use
+    LOG_LOCAL2    = 18      #  reserved for local use
+    LOG_LOCAL3    = 19      #  reserved for local use
+    LOG_LOCAL4    = 20      #  reserved for local use
+    LOG_LOCAL5    = 21      #  reserved for local use
+    LOG_LOCAL6    = 22      #  reserved for local use
+    LOG_LOCAL7    = 23      #  reserved for local use
+
+    priority_names = {
+        "alert":    LOG_ALERT,
+        "crit":     LOG_CRIT,
+        "critical": LOG_CRIT,
+        "debug":    LOG_DEBUG,
+        "emerg":    LOG_EMERG,
+        "err":      LOG_ERR,
+        "error":    LOG_ERR,        #  DEPRECATED
+        "info":     LOG_INFO,
+        "notice":   LOG_NOTICE,
+        "panic":    LOG_EMERG,      #  DEPRECATED
+        "warn":     LOG_WARNING,    #  DEPRECATED
+        "warning":  LOG_WARNING,
+        }
+
+    facility_names = {
+        "auth":         LOG_AUTH,
+        "authpriv":     LOG_AUTHPRIV,
+        "console":      LOG_CONSOLE,
+        "cron":         LOG_CRON,
+        "daemon":       LOG_DAEMON,
+        "ftp":          LOG_FTP,
+        "kern":         LOG_KERN,
+        "lpr":          LOG_LPR,
+        "mail":         LOG_MAIL,
+        "news":         LOG_NEWS,
+        "ntp":          LOG_NTP,
+        "security":     LOG_SECURITY,
+        "solaris-cron": LOG_SOLCRON,
+        "syslog":       LOG_SYSLOG,
+        "user":         LOG_USER,
+        "uucp":         LOG_UUCP,
+        "local0":       LOG_LOCAL0,
+        "local1":       LOG_LOCAL1,
+        "local2":       LOG_LOCAL2,
+        "local3":       LOG_LOCAL3,
+        "local4":       LOG_LOCAL4,
+        "local5":       LOG_LOCAL5,
+        "local6":       LOG_LOCAL6,
+        "local7":       LOG_LOCAL7,
+        }
+
+    # Originally added to work around GH-43683. Unnecessary since GH-50043 but kept
+    # for backwards compatibility.
+    priority_map = {
+        "DEBUG" : "debug",
+        "INFO" : "info",
+        "WARNING" : "warning",
+        "ERROR" : "error",
+        "CRITICAL" : "critical"
+    }
+
+    def __init__(self, address=('localhost', SYSLOG_UDP_PORT),
+                 facility=LOG_USER, socktype=None, timeout=None):
+        """
+        Initialize a handler.
+
+        If address is specified as a string, a UNIX socket is used. To log to a
+        local syslogd, "SysLogHandler(address="/dev/log")" can be used.
+        If facility is not specified, LOG_USER is used. If socktype is
+        specified as socket.SOCK_DGRAM or socket.SOCK_STREAM, that specific
+        socket type will be used. For Unix sockets, you can also specify a
+        socktype of None, in which case socket.SOCK_DGRAM will be used, falling
+        back to socket.SOCK_STREAM.
+        """
+        logging.Handler.__init__(self)
+
+        self.address = address
+        self.facility = facility
+        self.socktype = socktype
+        self.timeout = timeout
+        self.socket = None
+        self.createSocket()
+
+    def _connect_unixsocket(self, address):
+        use_socktype = self.socktype
+        if use_socktype is None:
+            use_socktype = socket.SOCK_DGRAM
+        self.socket = socket.socket(socket.AF_UNIX, use_socktype)
+        try:
+            self.socket.connect(address)
+            # it worked, so set self.socktype to the used type
+            self.socktype = use_socktype
+        except OSError:
+            self.socket.close()
+            if self.socktype is not None:
+                # user didn't specify falling back, so fail
+                raise
+            use_socktype = socket.SOCK_STREAM
+            self.socket = socket.socket(socket.AF_UNIX, use_socktype)
+            try:
+                self.socket.connect(address)
+                # it worked, so set self.socktype to the used type
+                self.socktype = use_socktype
+            except OSError:
+                self.socket.close()
+                raise
+
+    def createSocket(self):
+        """
+        Try to create a socket and, if it's not a datagram socket, connect it
+        to the other end. This method is called during handler initialization,
+        but it's not regarded as an error if the other end isn't listening yet
+        --- the method will be called again when emitting an event,
+        if there is no socket at that point.
+        """
+        address = self.address
+        socktype = self.socktype
+
+        if isinstance(address, str):
+            self.unixsocket = True
+            # Syslog server may be unavailable during handler initialisation.
+            # C's openlog() function also ignores connection errors.
+            # Moreover, we ignore these errors while logging, so it's not worse
+            # to ignore it also here.
+            try:
+                self._connect_unixsocket(address)
+            except OSError:
+                pass
+        else:
+            self.unixsocket = False
+            if socktype is None:
+                socktype = socket.SOCK_DGRAM
+            host, port = address
+            ress = socket.getaddrinfo(host, port, 0, socktype)
+            if not ress:
+                raise OSError("getaddrinfo returns an empty list")
+            for res in ress:
+                af, socktype, proto, _, sa = res
+                err = sock = None
+                try:
+                    sock = socket.socket(af, socktype, proto)
+                    if self.timeout:
+                        sock.settimeout(self.timeout)
+                    if socktype == socket.SOCK_STREAM:
+                        sock.connect(sa)
+                    break
+                except OSError as exc:
+                    err = exc
+                    if sock is not None:
+                        sock.close()
+            if err is not None:
+                raise err
+            self.socket = sock
+            self.socktype = socktype
+
+    def encodePriority(self, facility, priority):
+        """
+        Encode the facility and priority. You can pass in strings or
+        integers - if strings are passed, the facility_names and
+        priority_names mapping dictionaries are used to convert them to
+        integers.
+        """
+        if isinstance(facility, str):
+            facility = self.facility_names[facility]
+        if isinstance(priority, str):
+            priority = self.priority_names[priority]
+        return (facility << 3) | priority
+
+    def close(self):
+        """
+        Closes the socket.
+        """
+        with self.lock:
+            sock = self.socket
+            if sock:
+                self.socket = None
+                sock.close()
+            logging.Handler.close(self)
+
+    def mapPriority(self, levelName):
+        """
+        Map a logging level name to a key in the priority_names map.
+        This is useful in two scenarios: when custom levels are being
+        used, and in the case where you can't do a straightforward
+        mapping by lowercasing the logging level name because of locale-
+        specific issues (see SF #1524081).
+        """
+        return self.priority_map.get(levelName, "warning")
+
+    ident = ''          # prepended to all messages
+    append_nul = True   # some old syslog daemons expect a NUL terminator
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        The record is formatted, and then sent to the syslog server. If
+        exception information is present, it is NOT sent to the server.
+        """
+        try:
+            msg = self.format(record)
+            if self.ident:
+                msg = self.ident + msg
+            if self.append_nul:
+                msg += '\000'
+
+            # We need to convert record level to lowercase, maybe this will
+            # change in the future.
+            prio = '<%d>' % self.encodePriority(self.facility,
+                                                self.mapPriority(record.levelname))
+            prio = prio.encode('utf-8')
+            # Message is a string. Convert to bytes as required by RFC 5424
+            msg = msg.encode('utf-8')
+            msg = prio + msg
+
+            if not self.socket:
+                self.createSocket()
+
+            if self.unixsocket:
+                try:
+                    self.socket.send(msg)
+                except OSError:
+                    self.socket.close()
+                    self._connect_unixsocket(self.address)
+                    self.socket.send(msg)
+            elif self.socktype == socket.SOCK_DGRAM:
+                self.socket.sendto(msg, self.address)
+            else:
+                self.socket.sendall(msg)
+        except Exception:
+            self.handleError(record)
+
+class SMTPHandler(logging.Handler):
+    """
+    A handler class which sends an SMTP email for each logging event.
+    """
+    def __init__(self, mailhost, fromaddr, toaddrs, subject,
+                 credentials=None, secure=None, timeout=5.0):
+        """
+        Initialize the handler.
+
+        Initialize the instance with the from and to addresses and subject
+        line of the email. To specify a non-standard SMTP port, use the
+        (host, port) tuple format for the mailhost argument. To specify
+        authentication credentials, supply a (username, password) tuple
+        for the credentials argument. To specify the use of a secure
+        protocol (TLS), pass in a tuple for the secure argument. This will
+        only be used when authentication credentials are supplied. The tuple
+        will be either an empty tuple, or a single-value tuple with the name
+        of a keyfile, or a 2-value tuple with the names of the keyfile and
+        certificate file. (This tuple is passed to the
+        `ssl.SSLContext.load_cert_chain` method).
+        A timeout in seconds can be specified for the SMTP connection (the
+        default is one second).
+        """
+        logging.Handler.__init__(self)
+        if isinstance(mailhost, (list, tuple)):
+            self.mailhost, self.mailport = mailhost
+        else:
+            self.mailhost, self.mailport = mailhost, None
+        if isinstance(credentials, (list, tuple)):
+            self.username, self.password = credentials
+        else:
+            self.username = None
+        self.fromaddr = fromaddr
+        if isinstance(toaddrs, str):
+            toaddrs = [toaddrs]
+        self.toaddrs = toaddrs
+        self.subject = subject
+        self.secure = secure
+        self.timeout = timeout
+
+    def getSubject(self, record):
+        """
+        Determine the subject for the email.
+
+        If you want to specify a subject line which is record-dependent,
+        override this method.
+        """
+        return self.subject
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Format the record and send it to the specified addressees.
+        """
+        try:
+            import smtplib
+            from email.message import EmailMessage
+            import email.utils
+
+            port = self.mailport
+            if not port:
+                port = smtplib.SMTP_PORT
+            smtp = smtplib.SMTP(self.mailhost, port, timeout=self.timeout)
+            msg = EmailMessage()
+            msg['From'] = self.fromaddr
+            msg['To'] = ','.join(self.toaddrs)
+            msg['Subject'] = self.getSubject(record)
+            msg['Date'] = email.utils.localtime()
+            msg.set_content(self.format(record))
+            if self.username:
+                if self.secure is not None:
+                    import ssl
+
+                    try:
+                        keyfile = self.secure[0]
+                    except IndexError:
+                        keyfile = None
+
+                    try:
+                        certfile = self.secure[1]
+                    except IndexError:
+                        certfile = None
+
+                    context = ssl._create_stdlib_context(
+                        certfile=certfile, keyfile=keyfile
+                    )
+                    smtp.ehlo()
+                    smtp.starttls(context=context)
+                    smtp.ehlo()
+                smtp.login(self.username, self.password)
+            smtp.send_message(msg)
+            smtp.quit()
+        except Exception:
+            self.handleError(record)
+
+class NTEventLogHandler(logging.Handler):
+    """
+    A handler class which sends events to the NT Event Log. Adds a
+    registry entry for the specified application name. If no dllname is
+    provided, win32service.pyd (which contains some basic message
+    placeholders) is used. Note that use of these placeholders will make
+    your event logs big, as the entire message source is held in the log.
+    If you want slimmer logs, you have to pass in the name of your own DLL
+    which contains the message definitions you want to use in the event log.
+    """
+    def __init__(self, appname, dllname=None, logtype="Application"):
+        logging.Handler.__init__(self)
+        try:
+            import win32evtlogutil, win32evtlog
+            self.appname = appname
+            self._welu = win32evtlogutil
+            if not dllname:
+                dllname = os.path.split(self._welu.__file__)
+                dllname = os.path.split(dllname[0])
+                dllname = os.path.join(dllname[0], r'win32service.pyd')
+            self.dllname = dllname
+            self.logtype = logtype
+            # Administrative privileges are required to add a source to the registry.
+            # This may not be available for a user that just wants to add to an
+            # existing source - handle this specific case.
+            try:
+                self._welu.AddSourceToRegistry(appname, dllname, logtype)
+            except Exception as e:
+                # This will probably be a pywintypes.error. Only raise if it's not
+                # an "access denied" error, else let it pass
+                if getattr(e, 'winerror', None) != 5:  # not access denied
+                    raise
+            self.deftype = win32evtlog.EVENTLOG_ERROR_TYPE
+            self.typemap = {
+                logging.DEBUG   : win32evtlog.EVENTLOG_INFORMATION_TYPE,
+                logging.INFO    : win32evtlog.EVENTLOG_INFORMATION_TYPE,
+                logging.WARNING : win32evtlog.EVENTLOG_WARNING_TYPE,
+                logging.ERROR   : win32evtlog.EVENTLOG_ERROR_TYPE,
+                logging.CRITICAL: win32evtlog.EVENTLOG_ERROR_TYPE,
+         }
+        except ImportError:
+            print("The Python Win32 extensions for NT (service, event "\
+                        "logging) appear not to be available.")
+            self._welu = None
+
+    def getMessageID(self, record):
+        """
+        Return the message ID for the event record. If you are using your
+        own messages, you could do this by having the msg passed to the
+        logger being an ID rather than a formatting string. Then, in here,
+        you could use a dictionary lookup to get the message ID. This
+        version returns 1, which is the base message ID in win32service.pyd.
+        """
+        return 1
+
+    def getEventCategory(self, record):
+        """
+        Return the event category for the record.
+
+        Override this if you want to specify your own categories. This version
+        returns 0.
+        """
+        return 0
+
+    def getEventType(self, record):
+        """
+        Return the event type for the record.
+
+        Override this if you want to specify your own types. This version does
+        a mapping using the handler's typemap attribute, which is set up in
+        __init__() to a dictionary which contains mappings for DEBUG, INFO,
+        WARNING, ERROR and CRITICAL. If you are using your own levels you will
+        either need to override this method or place a suitable dictionary in
+        the handler's typemap attribute.
+        """
+        return self.typemap.get(record.levelno, self.deftype)
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Determine the message ID, event category and event type. Then
+        log the message in the NT event log.
+        """
+        if self._welu:
+            try:
+                id = self.getMessageID(record)
+                cat = self.getEventCategory(record)
+                type = self.getEventType(record)
+                msg = self.format(record)
+                self._welu.ReportEvent(self.appname, id, cat, type, [msg])
+            except Exception:
+                self.handleError(record)
+
+    def close(self):
+        """
+        Clean up this handler.
+
+        You can remove the application name from the registry as a
+        source of event log entries. However, if you do this, you will
+        not be able to see the events as you intended in the Event Log
+        Viewer - it needs to be able to access the registry to get the
+        DLL name.
+        """
+        #self._welu.RemoveSourceFromRegistry(self.appname, self.logtype)
+        logging.Handler.close(self)
+
+class HTTPHandler(logging.Handler):
+    """
+    A class which sends records to a web server, using either GET or
+    POST semantics.
+    """
+    def __init__(self, host, url, method="GET", secure=False, credentials=None,
+                 context=None):
+        """
+        Initialize the instance with the host, the request URL, and the method
+        ("GET" or "POST")
+        """
+        logging.Handler.__init__(self)
+        method = method.upper()
+        if method not in ["GET", "POST"]:
+            raise ValueError("method must be GET or POST")
+        if not secure and context is not None:
+            raise ValueError("context parameter only makes sense "
+                             "with secure=True")
+        self.host = host
+        self.url = url
+        self.method = method
+        self.secure = secure
+        self.credentials = credentials
+        self.context = context
+
+    def mapLogRecord(self, record):
+        """
+        Default implementation of mapping the log record into a dict
+        that is sent as the CGI data. Overwrite in your class.
+        Contributed by Franz Glasner.
+        """
+        return record.__dict__
+
+    def getConnection(self, host, secure):
+        """
+        get a HTTP[S]Connection.
+
+        Override when a custom connection is required, for example if
+        there is a proxy.
+        """
+        import http.client
+        if secure:
+            connection = http.client.HTTPSConnection(host, context=self.context)
+        else:
+            connection = http.client.HTTPConnection(host)
+        return connection
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Send the record to the web server as a percent-encoded dictionary
+        """
+        try:
+            import urllib.parse
+            host = self.host
+            h = self.getConnection(host, self.secure)
+            url = self.url
+            data = urllib.parse.urlencode(self.mapLogRecord(record))
+            if self.method == "GET":
+                if (url.find('?') >= 0):
+                    sep = '&'
+                else:
+                    sep = '?'
+                url = url + "%c%s" % (sep, data)
+            h.putrequest(self.method, url)
+            # support multiple hosts on one IP address...
+            # need to strip optional :port from host, if present
+            i = host.find(":")
+            if i >= 0:
+                host = host[:i]
+            # See issue #30904: putrequest call above already adds this header
+            # on Python 3.x.
+            # h.putheader("Host", host)
+            if self.method == "POST":
+                h.putheader("Content-type",
+                            "application/x-www-form-urlencoded")
+                h.putheader("Content-length", str(len(data)))
+            if self.credentials:
+                import base64
+                s = ('%s:%s' % self.credentials).encode('utf-8')
+                s = 'Basic ' + base64.b64encode(s).strip().decode('ascii')
+                h.putheader('Authorization', s)
+            h.endheaders()
+            if self.method == "POST":
+                h.send(data.encode('utf-8'))
+            h.getresponse()    #can't do anything with the result
+        except Exception:
+            self.handleError(record)
+
+class BufferingHandler(logging.Handler):
+    """
+  A handler class which buffers logging records in memory. Whenever each
+  record is added to the buffer, a check is made to see if the buffer should
+  be flushed. If it should, then flush() is expected to do what's needed.
+    """
+    def __init__(self, capacity):
+        """
+        Initialize the handler with the buffer size.
+        """
+        logging.Handler.__init__(self)
+        self.capacity = capacity
+        self.buffer = []
+
+    def shouldFlush(self, record):
+        """
+        Should the handler flush its buffer?
+
+        Returns true if the buffer is up to capacity. This method can be
+        overridden to implement custom flushing strategies.
+        """
+        return (len(self.buffer) >= self.capacity)
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Append the record. If shouldFlush() tells us to, call flush() to process
+        the buffer.
+        """
+        self.buffer.append(record)
+        if self.shouldFlush(record):
+            self.flush()
+
+    def flush(self):
+        """
+        Override to implement custom flushing behaviour.
+
+        This version just zaps the buffer to empty.
+        """
+        with self.lock:
+            self.buffer.clear()
+
+    def close(self):
+        """
+        Close the handler.
+
+        This version just flushes and chains to the parent class' close().
+        """
+        try:
+            self.flush()
+        finally:
+            logging.Handler.close(self)
+
+class MemoryHandler(BufferingHandler):
+    """
+    A handler class which buffers logging records in memory, periodically
+    flushing them to a target handler. Flushing occurs whenever the buffer
+    is full, or when an event of a certain severity or greater is seen.
+    """
+    def __init__(self, capacity, flushLevel=logging.ERROR, target=None,
+                 flushOnClose=True):
+        """
+        Initialize the handler with the buffer size, the level at which
+        flushing should occur and an optional target.
+
+        Note that without a target being set either here or via setTarget(),
+        a MemoryHandler is no use to anyone!
+
+        The ``flushOnClose`` argument is ``True`` for backward compatibility
+        reasons - the old behaviour is that when the handler is closed, the
+        buffer is flushed, even if the flush level hasn't been exceeded nor the
+        capacity exceeded. To prevent this, set ``flushOnClose`` to ``False``.
+        """
+        BufferingHandler.__init__(self, capacity)
+        self.flushLevel = flushLevel
+        self.target = target
+        # See Issue #26559 for why this has been added
+        self.flushOnClose = flushOnClose
+
+    def shouldFlush(self, record):
+        """
+        Check for buffer full or a record at the flushLevel or higher.
+        """
+        return (len(self.buffer) >= self.capacity) or \
+                (record.levelno >= self.flushLevel)
+
+    def setTarget(self, target):
+        """
+        Set the target handler for this handler.
+        """
+        with self.lock:
+            self.target = target
+
+    def flush(self):
+        """
+        For a MemoryHandler, flushing means just sending the buffered
+        records to the target, if there is one. Override if you want
+        different behaviour.
+
+        The record buffer is only cleared if a target has been set.
+        """
+        with self.lock:
+            if self.target:
+                for record in self.buffer:
+                    self.target.handle(record)
+                self.buffer.clear()
+
+    def close(self):
+        """
+        Flush, if appropriately configured, set the target to None and lose the
+        buffer.
+        """
+        try:
+            if self.flushOnClose:
+                self.flush()
+        finally:
+            with self.lock:
+                self.target = None
+                BufferingHandler.close(self)
+
+
+class QueueHandler(logging.Handler):
+    """
+    This handler sends events to a queue. Typically, it would be used together
+    with a multiprocessing Queue to centralise logging to file in one process
+    (in a multi-process application), so as to avoid file write contention
+    between processes.
+
+    This code is new in Python 3.2, but this class can be copy pasted into
+    user code for use with earlier Python versions.
+    """
+
+    def __init__(self, queue):
+        """
+        Initialise an instance, using the passed queue.
+        """
+        logging.Handler.__init__(self)
+        self.queue = queue
+        self.listener = None  # will be set to listener if configured via dictConfig()
+
+    def enqueue(self, record):
+        """
+        Enqueue a record.
+
+        The base implementation uses put_nowait. You may want to override
+        this method if you want to use blocking, timeouts or custom queue
+        implementations.
+        """
+        self.queue.put_nowait(record)
+
+    def prepare(self, record):
+        """
+        Prepare a record for queuing. The object returned by this method is
+        enqueued.
+
+        The base implementation formats the record to merge the message and
+        arguments, and removes unpickleable items from the record in-place.
+        Specifically, it overwrites the record's `msg` and
+        `message` attributes with the merged message (obtained by
+        calling the handler's `format` method), and sets the `args`,
+        `exc_info` and `exc_text` attributes to None.
+
+        You might want to override this method if you want to convert
+        the record to a dict or JSON string, or send a modified copy
+        of the record while leaving the original intact.
+        """
+        # The format operation gets traceback text into record.exc_text
+        # (if there's exception data), and also returns the formatted
+        # message. We can then use this to replace the original
+        # msg + args, as these might be unpickleable. We also zap the
+        # exc_info, exc_text and stack_info attributes, as they are no longer
+        # needed and, if not None, will typically not be pickleable.
+        msg = self.format(record)
+        # bpo-35726: make copy of record to avoid affecting other handlers in the chain.
+        record = copy.copy(record)
+        record.message = msg
+        record.msg = msg
+        record.args = None
+        record.exc_info = None
+        record.exc_text = None
+        record.stack_info = None
+        return record
+
+    def emit(self, record):
+        """
+        Emit a record.
+
+        Writes the LogRecord to the queue, preparing it for pickling first.
+        """
+        try:
+            self.enqueue(self.prepare(record))
+        except Exception:
+            self.handleError(record)
+
+
+class QueueListener(object):
+    """
+    This class implements an internal threaded listener which watches for
+    LogRecords being added to a queue, removes them and passes them to a
+    list of handlers for processing.
+    """
+    _sentinel = None
+
+    def __init__(self, queue, *handlers, respect_handler_level=False):
+        """
+        Initialise an instance with the specified queue and
+        handlers.
+        """
+        self.queue = queue
+        self.handlers = handlers
+        self._thread = None
+        self.respect_handler_level = respect_handler_level
+
+    def __enter__(self):
+        """
+        For use as a context manager. Starts the listener.
+        """
+        self.start()
+        return self
+
+    def __exit__(self, *args):
+        """
+        For use as a context manager. Stops the listener.
+        """
+        self.stop()
+
+    def dequeue(self, block):
+        """
+        Dequeue a record and return it, optionally blocking.
+
+        The base implementation uses get. You may want to override this method
+        if you want to use timeouts or work with custom queue implementations.
+        """
+        return self.queue.get(block)
+
+    def start(self):
+        """
+        Start the listener.
+
+        This starts up a background thread to monitor the queue for
+        LogRecords to process.
+        """
+        if self._thread is not None:
+            raise RuntimeError("Listener already started")
+
+        self._thread = t = threading.Thread(target=self._monitor)
+        t.daemon = True
+        t.start()
+
+    def prepare(self, record):
+        """
+        Prepare a record for handling.
+
+        This method just returns the passed-in record. You may want to
+        override this method if you need to do any custom marshalling or
+        manipulation of the record before passing it to the handlers.
+        """
+        return record
+
+    def handle(self, record):
+        """
+        Handle a record.
+
+        This just loops through the handlers offering them the record
+        to handle.
+        """
+        record = self.prepare(record)
+        for handler in self.handlers:
+            if not self.respect_handler_level:
+                process = True
+            else:
+                process = record.levelno >= handler.level
+            if process:
+                handler.handle(record)
+
+    def _monitor(self):
+        """
+        Monitor the queue for records, and ask the handler
+        to deal with them.
+
+        This method runs on a separate, internal thread.
+        The thread will terminate if it sees a sentinel object in the queue.
+        """
+        q = self.queue
+        has_task_done = hasattr(q, 'task_done')
+        while True:
+            try:
+                record = self.dequeue(True)
+                if record is self._sentinel:
+                    if has_task_done:
+                        q.task_done()
+                    break
+                self.handle(record)
+                if has_task_done:
+                    q.task_done()
+            except queue.Empty:
+                break
+
+    def enqueue_sentinel(self):
+        """
+        This is used to enqueue the sentinel record.
+
+        The base implementation uses put_nowait. You may want to override this
+        method if you want to use timeouts or work with custom queue
+        implementations.
+        """
+        self.queue.put_nowait(self._sentinel)
+
+    def stop(self):
+        """
+        Stop the listener.
+
+        This asks the thread to terminate, and then waits for it to do so.
+        Note that if you don't call this before your application exits, there
+        may be some records still left on the queue, which won't be processed.
+        """
+        if self._thread:  # see gh-114706 - allow calling this more than once
+            self.enqueue_sentinel()
+            self._thread.join()
+            self._thread = None
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..8336f381decaacf58640640a6f05a45ba3a2c3e4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/__init__.py
@@ -0,0 +1,37 @@
+#
+# Package analogous to 'threading.py' but using processes
+#
+# multiprocessing/__init__.py
+#
+# This package is intended to duplicate the functionality (and much of
+# the API) of threading.py but uses processes instead of threads.  A
+# subpackage 'multiprocessing.dummy' has the same API but is a simple
+# wrapper for 'threading'.
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+import sys
+from . import context
+
+#
+# Copy stuff from default context
+#
+
+__all__ = [x for x in dir(context._default_context) if not x.startswith('_')]
+globals().update((name, getattr(context._default_context, name)) for name in __all__)
+
+#
+# XXX These should not really be documented or public.
+#
+
+SUBDEBUG = 5
+SUBWARNING = 25
+
+#
+# Alias for main module -- will be reset by bootstrapping child processes
+#
+
+if '__main__' in sys.modules:
+    sys.modules['__mp_main__'] = sys.modules['__main__']
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/connection.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/connection.py
new file mode 100644
index 0000000000000000000000000000000000000000..a6e1b0c786284bcea0a60f1c00cfc0ceadd60220
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/connection.py
@@ -0,0 +1,1229 @@
+#
+# A higher level module for using sockets (or Windows named pipes)
+#
+# multiprocessing/connection.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = [ 'Client', 'Listener', 'Pipe', 'wait' ]
+
+import errno
+import io
+import itertools
+import os
+import sys
+import socket
+import struct
+import tempfile
+import time
+
+
+from . import util
+
+from . import AuthenticationError, BufferTooShort
+from .context import reduction
+_ForkingPickler = reduction.ForkingPickler
+
+try:
+    import _multiprocessing
+    import _winapi
+    from _winapi import WAIT_OBJECT_0, WAIT_ABANDONED_0, WAIT_TIMEOUT, INFINITE
+except ImportError:
+    if sys.platform == 'win32':
+        raise
+    _winapi = None
+
+#
+#
+#
+
+# 64 KiB is the default PIPE buffer size of most POSIX platforms.
+BUFSIZE = 64 * 1024
+
+# A very generous timeout when it comes to local connections...
+CONNECTION_TIMEOUT = 20.
+
+_mmap_counter = itertools.count()
+_MAX_PIPE_ATTEMPTS = 100
+
+default_family = 'AF_INET'
+families = ['AF_INET']
+
+if hasattr(socket, 'AF_UNIX'):
+    default_family = 'AF_UNIX'
+    families += ['AF_UNIX']
+
+if sys.platform == 'win32':
+    default_family = 'AF_PIPE'
+    families += ['AF_PIPE']
+
+
+def _init_timeout(timeout=CONNECTION_TIMEOUT):
+    return time.monotonic() + timeout
+
+def _check_timeout(t):
+    return time.monotonic() > t
+
+#
+#
+#
+
+def arbitrary_address(family):
+    '''
+    Return an arbitrary free address for the given family
+    '''
+    if family == 'AF_INET':
+        return ('localhost', 0)
+    elif family == 'AF_UNIX':
+        return tempfile.mktemp(prefix='sock-', dir=util.get_temp_dir())
+    elif family == 'AF_PIPE':
+        return (r'\\.\pipe\pyc-%d-%d-%s' %
+                (os.getpid(), next(_mmap_counter), os.urandom(8).hex()))
+    else:
+        raise ValueError('unrecognized family')
+
+def _validate_family(family):
+    '''
+    Checks if the family is valid for the current environment.
+    '''
+    if sys.platform != 'win32' and family == 'AF_PIPE':
+        raise ValueError('Family %s is not recognized.' % family)
+
+    if sys.platform == 'win32' and family == 'AF_UNIX':
+        # double check
+        if not hasattr(socket, family):
+            raise ValueError('Family %s is not recognized.' % family)
+
+def address_type(address):
+    '''
+    Return the types of the address
+
+    This can be 'AF_INET', 'AF_UNIX', or 'AF_PIPE'
+    '''
+    if type(address) == tuple:
+        return 'AF_INET'
+    elif type(address) is str and address.startswith('\\\\'):
+        return 'AF_PIPE'
+    elif type(address) is str or util.is_abstract_socket_namespace(address):
+        return 'AF_UNIX'
+    else:
+        raise ValueError('address type of %r unrecognized' % address)
+
+#
+# Connection classes
+#
+
+class _ConnectionBase:
+    _handle = None
+
+    def __init__(self, handle, readable=True, writable=True):
+        handle = handle.__index__()
+        if handle < 0:
+            raise ValueError("invalid handle")
+        if not readable and not writable:
+            raise ValueError(
+                "at least one of `readable` and `writable` must be True")
+        self._handle = handle
+        self._readable = readable
+        self._writable = writable
+
+    # XXX should we use util.Finalize instead of a __del__?
+
+    def __del__(self):
+        if self._handle is not None:
+            self._close()
+
+    def _check_closed(self):
+        if self._handle is None:
+            raise OSError("handle is closed")
+
+    def _check_readable(self):
+        if not self._readable:
+            raise OSError("connection is write-only")
+
+    def _check_writable(self):
+        if not self._writable:
+            raise OSError("connection is read-only")
+
+    def _bad_message_length(self):
+        if self._writable:
+            self._readable = False
+        else:
+            self.close()
+        raise OSError("bad message length")
+
+    @property
+    def closed(self):
+        """True if the connection is closed"""
+        return self._handle is None
+
+    @property
+    def readable(self):
+        """True if the connection is readable"""
+        return self._readable
+
+    @property
+    def writable(self):
+        """True if the connection is writable"""
+        return self._writable
+
+    def fileno(self):
+        """File descriptor or handle of the connection"""
+        self._check_closed()
+        return self._handle
+
+    def close(self):
+        """Close the connection"""
+        if self._handle is not None:
+            try:
+                self._close()
+            finally:
+                self._handle = None
+
+    def _detach(self):
+        """Stop managing the underlying file descriptor or handle."""
+        self._handle = None
+
+    def send_bytes(self, buf, offset=0, size=None):
+        """Send the bytes data from a bytes-like object"""
+        self._check_closed()
+        self._check_writable()
+        m = memoryview(buf)
+        if m.itemsize > 1:
+            m = m.cast('B')
+        n = m.nbytes
+        if offset < 0:
+            raise ValueError("offset is negative")
+        if n < offset:
+            raise ValueError("buffer length < offset")
+        if size is None:
+            size = n - offset
+        elif size < 0:
+            raise ValueError("size is negative")
+        elif offset + size > n:
+            raise ValueError("buffer length < offset + size")
+        self._send_bytes(m[offset:offset + size])
+
+    def send(self, obj):
+        """Send a (picklable) object"""
+        self._check_closed()
+        self._check_writable()
+        self._send_bytes(_ForkingPickler.dumps(obj))
+
+    def recv_bytes(self, maxlength=None):
+        """
+        Receive bytes data as a bytes object.
+        """
+        self._check_closed()
+        self._check_readable()
+        if maxlength is not None and maxlength < 0:
+            raise ValueError("negative maxlength")
+        buf = self._recv_bytes(maxlength)
+        if buf is None:
+            self._bad_message_length()
+        return buf.getvalue()
+
+    def recv_bytes_into(self, buf, offset=0):
+        """
+        Receive bytes data into a writeable bytes-like object.
+        Return the number of bytes read.
+        """
+        self._check_closed()
+        self._check_readable()
+        with memoryview(buf) as m:
+            # Get bytesize of arbitrary buffer
+            itemsize = m.itemsize
+            bytesize = itemsize * len(m)
+            if offset < 0:
+                raise ValueError("negative offset")
+            elif offset > bytesize:
+                raise ValueError("offset too large")
+            result = self._recv_bytes()
+            size = result.tell()
+            if bytesize < offset + size:
+                raise BufferTooShort(result.getvalue())
+            # Message can fit in dest
+            result.seek(0)
+            result.readinto(m[offset // itemsize :
+                              (offset + size) // itemsize])
+            return size
+
+    def recv(self):
+        """Receive a (picklable) object"""
+        self._check_closed()
+        self._check_readable()
+        buf = self._recv_bytes()
+        return _ForkingPickler.loads(buf.getbuffer())
+
+    def poll(self, timeout=0.0):
+        """Whether there is any input available to be read"""
+        self._check_closed()
+        self._check_readable()
+        return self._poll(timeout)
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_value, exc_tb):
+        self.close()
+
+
+if _winapi:
+
+    class PipeConnection(_ConnectionBase):
+        """
+        Connection class based on a Windows named pipe.
+        Overlapped I/O is used, so the handles must have been created
+        with FILE_FLAG_OVERLAPPED.
+        """
+        _got_empty_message = False
+        _send_ov = None
+
+        def _close(self, _CloseHandle=_winapi.CloseHandle):
+            ov = self._send_ov
+            if ov is not None:
+                # Interrupt WaitForMultipleObjects() in _send_bytes()
+                ov.cancel()
+            _CloseHandle(self._handle)
+
+        def _send_bytes(self, buf):
+            if self._send_ov is not None:
+                # A connection should only be used by a single thread
+                raise ValueError("concurrent send_bytes() calls "
+                                 "are not supported")
+            ov, err = _winapi.WriteFile(self._handle, buf, overlapped=True)
+            self._send_ov = ov
+            try:
+                if err == _winapi.ERROR_IO_PENDING:
+                    waitres = _winapi.WaitForMultipleObjects(
+                        [ov.event], False, INFINITE)
+                    assert waitres == WAIT_OBJECT_0
+            except:
+                ov.cancel()
+                raise
+            finally:
+                self._send_ov = None
+                nwritten, err = ov.GetOverlappedResult(True)
+            if err == _winapi.ERROR_OPERATION_ABORTED:
+                # close() was called by another thread while
+                # WaitForMultipleObjects() was waiting for the overlapped
+                # operation.
+                raise OSError(errno.EPIPE, "handle is closed")
+            assert err == 0
+            assert nwritten == len(buf)
+
+        def _recv_bytes(self, maxsize=None):
+            if self._got_empty_message:
+                self._got_empty_message = False
+                return io.BytesIO()
+            else:
+                bsize = 128 if maxsize is None else min(maxsize, 128)
+                try:
+                    ov, err = _winapi.ReadFile(self._handle, bsize,
+                                                overlapped=True)
+
+                    sentinel = object()
+                    return_value = sentinel
+                    try:
+                        try:
+                            if err == _winapi.ERROR_IO_PENDING:
+                                waitres = _winapi.WaitForMultipleObjects(
+                                    [ov.event], False, INFINITE)
+                                assert waitres == WAIT_OBJECT_0
+                        except:
+                            ov.cancel()
+                            raise
+                        finally:
+                            nread, err = ov.GetOverlappedResult(True)
+                            if err == 0:
+                                f = io.BytesIO()
+                                f.write(ov.getbuffer())
+                                return_value = f
+                            elif err == _winapi.ERROR_MORE_DATA:
+                                return_value = self._get_more_data(ov, maxsize)
+                    except:
+                        if return_value is sentinel:
+                            raise
+
+                    if return_value is not sentinel:
+                        return return_value
+                except OSError as e:
+                    if e.winerror == _winapi.ERROR_BROKEN_PIPE:
+                        raise EOFError
+                    else:
+                        raise
+            raise RuntimeError("shouldn't get here; expected KeyboardInterrupt")
+
+        def _poll(self, timeout):
+            if (self._got_empty_message or
+                        _winapi.PeekNamedPipe(self._handle)[0] != 0):
+                return True
+            return bool(wait([self], timeout))
+
+        def _get_more_data(self, ov, maxsize):
+            buf = ov.getbuffer()
+            f = io.BytesIO()
+            f.write(buf)
+            left = _winapi.PeekNamedPipe(self._handle)[1]
+            assert left > 0
+            if maxsize is not None and len(buf) + left > maxsize:
+                self._bad_message_length()
+            ov, err = _winapi.ReadFile(self._handle, left, overlapped=True)
+            rbytes, err = ov.GetOverlappedResult(True)
+            assert err == 0
+            assert rbytes == left
+            f.write(ov.getbuffer())
+            return f
+
+
+class Connection(_ConnectionBase):
+    """
+    Connection class based on an arbitrary file descriptor (Unix only), or
+    a socket handle (Windows).
+    """
+
+    if _winapi:
+        def _close(self, _close=_multiprocessing.closesocket):
+            _close(self._handle)
+        _write = _multiprocessing.send
+        _read = _multiprocessing.recv
+    else:
+        def _close(self, _close=os.close):
+            _close(self._handle)
+        _write = os.write
+        _read = os.read
+
+    def _send(self, buf, write=_write):
+        remaining = len(buf)
+        while True:
+            n = write(self._handle, buf)
+            remaining -= n
+            if remaining == 0:
+                break
+            buf = buf[n:]
+
+    def _recv(self, size, read=_read):
+        buf = io.BytesIO()
+        handle = self._handle
+        remaining = size
+        while remaining > 0:
+            to_read = min(BUFSIZE, remaining)
+            chunk = read(handle, to_read)
+            n = len(chunk)
+            if n == 0:
+                if remaining == size:
+                    raise EOFError
+                else:
+                    raise OSError("got end of file during message")
+            buf.write(chunk)
+            remaining -= n
+        return buf
+
+    def _send_bytes(self, buf):
+        n = len(buf)
+        if n > 0x7fffffff:
+            pre_header = struct.pack("!i", -1)
+            header = struct.pack("!Q", n)
+            self._send(pre_header)
+            self._send(header)
+            self._send(buf)
+        else:
+            # For wire compatibility with 3.7 and lower
+            header = struct.pack("!i", n)
+            if n > 16384:
+                # The payload is large so Nagle's algorithm won't be triggered
+                # and we'd better avoid the cost of concatenation.
+                self._send(header)
+                self._send(buf)
+            else:
+                # Issue #20540: concatenate before sending, to avoid delays due
+                # to Nagle's algorithm on a TCP socket.
+                # Also note we want to avoid sending a 0-length buffer separately,
+                # to avoid "broken pipe" errors if the other end closed the pipe.
+                self._send(header + buf)
+
+    def _recv_bytes(self, maxsize=None):
+        buf = self._recv(4)
+        size, = struct.unpack("!i", buf.getvalue())
+        if size == -1:
+            buf = self._recv(8)
+            size, = struct.unpack("!Q", buf.getvalue())
+        if maxsize is not None and size > maxsize:
+            return None
+        return self._recv(size)
+
+    def _poll(self, timeout):
+        r = wait([self], timeout)
+        return bool(r)
+
+
+#
+# Public functions
+#
+
+class Listener(object):
+    '''
+    Returns a listener object.
+
+    This is a wrapper for a bound socket which is 'listening' for
+    connections, or for a Windows named pipe.
+    '''
+    def __init__(self, address=None, family=None, backlog=1, authkey=None):
+        family = family or (address and address_type(address)) \
+                 or default_family
+        _validate_family(family)
+        if authkey is not None and not isinstance(authkey, bytes):
+            raise TypeError('authkey should be a byte string')
+
+        if family == 'AF_PIPE':
+            if address:
+                self._listener = PipeListener(address, backlog)
+            else:
+                for attempts in itertools.count():
+                    address = arbitrary_address(family)
+                    try:
+                        self._listener = PipeListener(address, backlog)
+                        break
+                    except OSError as e:
+                        if attempts >= _MAX_PIPE_ATTEMPTS:
+                            raise
+                        if e.winerror not in (_winapi.ERROR_PIPE_BUSY,
+                                              _winapi.ERROR_ACCESS_DENIED):
+                            raise
+        else:
+            address = address or arbitrary_address(family)
+            self._listener = SocketListener(address, family, backlog)
+
+        self._authkey = authkey
+
+    def accept(self):
+        '''
+        Accept a connection on the bound socket or named pipe of `self`.
+
+        Returns a `Connection` object.
+        '''
+        if self._listener is None:
+            raise OSError('listener is closed')
+
+        c = self._listener.accept()
+        if self._authkey is not None:
+            deliver_challenge(c, self._authkey)
+            answer_challenge(c, self._authkey)
+        return c
+
+    def close(self):
+        '''
+        Close the bound socket or named pipe of `self`.
+        '''
+        listener = self._listener
+        if listener is not None:
+            self._listener = None
+            listener.close()
+
+    @property
+    def address(self):
+        return self._listener._address
+
+    @property
+    def last_accepted(self):
+        return self._listener._last_accepted
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_value, exc_tb):
+        self.close()
+
+
+def Client(address, family=None, authkey=None):
+    '''
+    Returns a connection to the address of a `Listener`
+    '''
+    family = family or address_type(address)
+    _validate_family(family)
+    if family == 'AF_PIPE':
+        c = PipeClient(address)
+    else:
+        c = SocketClient(address)
+
+    if authkey is not None and not isinstance(authkey, bytes):
+        raise TypeError('authkey should be a byte string')
+
+    if authkey is not None:
+        answer_challenge(c, authkey)
+        deliver_challenge(c, authkey)
+
+    return c
+
+
+if sys.platform != 'win32':
+
+    def Pipe(duplex=True):
+        '''
+        Returns pair of connection objects at either end of a pipe
+        '''
+        if duplex:
+            s1, s2 = socket.socketpair()
+            s1.setblocking(True)
+            s2.setblocking(True)
+            c1 = Connection(s1.detach())
+            c2 = Connection(s2.detach())
+        else:
+            fd1, fd2 = os.pipe()
+            c1 = Connection(fd1, writable=False)
+            c2 = Connection(fd2, readable=False)
+
+        return c1, c2
+
+else:
+
+    def Pipe(duplex=True):
+        '''
+        Returns pair of connection objects at either end of a pipe
+        '''
+        if duplex:
+            openmode = _winapi.PIPE_ACCESS_DUPLEX
+            access = _winapi.GENERIC_READ | _winapi.GENERIC_WRITE
+            obsize, ibsize = BUFSIZE, BUFSIZE
+        else:
+            openmode = _winapi.PIPE_ACCESS_INBOUND
+            access = _winapi.GENERIC_WRITE
+            obsize, ibsize = 0, BUFSIZE
+
+        for attempts in itertools.count():
+            address = arbitrary_address('AF_PIPE')
+            try:
+                h1 = _winapi.CreateNamedPipe(
+                    address, openmode | _winapi.FILE_FLAG_OVERLAPPED |
+                    _winapi.FILE_FLAG_FIRST_PIPE_INSTANCE,
+                    _winapi.PIPE_TYPE_MESSAGE | _winapi.PIPE_READMODE_MESSAGE |
+                    _winapi.PIPE_WAIT,
+                    1, obsize, ibsize, _winapi.NMPWAIT_WAIT_FOREVER,
+                    # default security descriptor: the handle cannot be inherited
+                    _winapi.NULL
+                    )
+                break
+            except OSError as e:
+                if attempts >= _MAX_PIPE_ATTEMPTS:
+                    raise
+                if e.winerror not in (_winapi.ERROR_PIPE_BUSY,
+                                      _winapi.ERROR_ACCESS_DENIED):
+                    raise
+        h2 = _winapi.CreateFile(
+            address, access, 0, _winapi.NULL, _winapi.OPEN_EXISTING,
+            _winapi.FILE_FLAG_OVERLAPPED, _winapi.NULL
+            )
+        _winapi.SetNamedPipeHandleState(
+            h2, _winapi.PIPE_READMODE_MESSAGE, None, None
+            )
+
+        overlapped = _winapi.ConnectNamedPipe(h1, overlapped=True)
+        _, err = overlapped.GetOverlappedResult(True)
+        assert err == 0
+
+        c1 = PipeConnection(h1, writable=duplex)
+        c2 = PipeConnection(h2, readable=duplex)
+
+        return c1, c2
+
+#
+# Definitions for connections based on sockets
+#
+
+class SocketListener(object):
+    '''
+    Representation of a socket which is bound to an address and listening
+    '''
+    def __init__(self, address, family, backlog=1):
+        self._socket = socket.socket(getattr(socket, family))
+        try:
+            # SO_REUSEADDR has different semantics on Windows (issue #2550).
+            if os.name == 'posix':
+                self._socket.setsockopt(socket.SOL_SOCKET,
+                                        socket.SO_REUSEADDR, 1)
+            self._socket.setblocking(True)
+            self._socket.bind(address)
+            self._socket.listen(backlog)
+            self._address = self._socket.getsockname()
+        except OSError:
+            self._socket.close()
+            raise
+        self._family = family
+        self._last_accepted = None
+
+        if family == 'AF_UNIX' and not util.is_abstract_socket_namespace(address):
+            # Linux abstract socket namespaces do not need to be explicitly unlinked
+            self._unlink = util.Finalize(
+                self, os.unlink, args=(address,), exitpriority=0
+                )
+        else:
+            self._unlink = None
+
+    def accept(self):
+        s, self._last_accepted = self._socket.accept()
+        s.setblocking(True)
+        return Connection(s.detach())
+
+    def close(self):
+        try:
+            self._socket.close()
+        finally:
+            unlink = self._unlink
+            if unlink is not None:
+                self._unlink = None
+                unlink()
+
+
+def SocketClient(address):
+    '''
+    Return a connection object connected to the socket given by `address`
+    '''
+    family = address_type(address)
+    with socket.socket( getattr(socket, family) ) as s:
+        s.setblocking(True)
+        s.connect(address)
+        return Connection(s.detach())
+
+#
+# Definitions for connections based on named pipes
+#
+
+if sys.platform == 'win32':
+
+    class PipeListener(object):
+        '''
+        Representation of a named pipe
+        '''
+        def __init__(self, address, backlog=None):
+            self._address = address
+            self._handle_queue = [self._new_handle(first=True)]
+
+            self._last_accepted = None
+            util.sub_debug('listener created with address=%r', self._address)
+            self.close = util.Finalize(
+                self, PipeListener._finalize_pipe_listener,
+                args=(self._handle_queue, self._address), exitpriority=0
+                )
+
+        def _new_handle(self, first=False):
+            flags = _winapi.PIPE_ACCESS_DUPLEX | _winapi.FILE_FLAG_OVERLAPPED
+            if first:
+                flags |= _winapi.FILE_FLAG_FIRST_PIPE_INSTANCE
+            return _winapi.CreateNamedPipe(
+                self._address, flags,
+                _winapi.PIPE_TYPE_MESSAGE | _winapi.PIPE_READMODE_MESSAGE |
+                _winapi.PIPE_WAIT,
+                _winapi.PIPE_UNLIMITED_INSTANCES, BUFSIZE, BUFSIZE,
+                _winapi.NMPWAIT_WAIT_FOREVER, _winapi.NULL
+                )
+
+        def accept(self):
+            self._handle_queue.append(self._new_handle())
+            handle = self._handle_queue.pop(0)
+            try:
+                ov = _winapi.ConnectNamedPipe(handle, overlapped=True)
+            except OSError as e:
+                if e.winerror != _winapi.ERROR_NO_DATA:
+                    raise
+                # ERROR_NO_DATA can occur if a client has already connected,
+                # written data and then disconnected -- see Issue 14725.
+            else:
+                try:
+                    res = _winapi.WaitForMultipleObjects(
+                        [ov.event], False, INFINITE)
+                except:
+                    ov.cancel()
+                    _winapi.CloseHandle(handle)
+                    raise
+                finally:
+                    _, err = ov.GetOverlappedResult(True)
+                    assert err == 0
+            return PipeConnection(handle)
+
+        @staticmethod
+        def _finalize_pipe_listener(queue, address):
+            util.sub_debug('closing listener with address=%r', address)
+            for handle in queue:
+                _winapi.CloseHandle(handle)
+
+    def PipeClient(address):
+        '''
+        Return a connection object connected to the pipe given by `address`
+        '''
+        t = _init_timeout()
+        while 1:
+            try:
+                _winapi.WaitNamedPipe(address, 1000)
+                h = _winapi.CreateFile(
+                    address, _winapi.GENERIC_READ | _winapi.GENERIC_WRITE,
+                    0, _winapi.NULL, _winapi.OPEN_EXISTING,
+                    _winapi.FILE_FLAG_OVERLAPPED, _winapi.NULL
+                    )
+            except OSError as e:
+                if e.winerror not in (_winapi.ERROR_SEM_TIMEOUT,
+                                      _winapi.ERROR_PIPE_BUSY) or _check_timeout(t):
+                    raise
+            else:
+                break
+        else:
+            raise
+
+        _winapi.SetNamedPipeHandleState(
+            h, _winapi.PIPE_READMODE_MESSAGE, None, None
+            )
+        return PipeConnection(h)
+
+#
+# Authentication stuff
+#
+
+MESSAGE_LENGTH = 40  # MUST be > 20
+
+_CHALLENGE = b'#CHALLENGE#'
+_WELCOME = b'#WELCOME#'
+_FAILURE = b'#FAILURE#'
+
+# multiprocessing.connection Authentication Handshake Protocol Description
+# (as documented for reference after reading the existing code)
+# =============================================================================
+#
+# On Windows: native pipes with "overlapped IO" are used to send the bytes,
+# instead of the length prefix SIZE scheme described below. (ie: the OS deals
+# with message sizes for us)
+#
+# Protocol error behaviors:
+#
+# On POSIX, any failure to receive the length prefix into SIZE, for SIZE greater
+# than the requested maxsize to receive, or receiving fewer than SIZE bytes
+# results in the connection being closed and auth to fail.
+#
+# On Windows, receiving too few bytes is never a low level _recv_bytes read
+# error, receiving too many will trigger an error only if receive maxsize
+# value was larger than 128 OR the if the data arrived in smaller pieces.
+#
+#      Serving side                           Client side
+#     ------------------------------  ---------------------------------------
+# 0.                                  Open a connection on the pipe.
+# 1.  Accept connection.
+# 2.  Random 20+ bytes -> MESSAGE
+#     Modern servers always send
+#     more than 20 bytes and include
+#     a {digest} prefix on it with
+#     their preferred HMAC digest.
+#     Legacy ones send ==20 bytes.
+# 3.  send 4 byte length (net order)
+#     prefix followed by:
+#       b'#CHALLENGE#' + MESSAGE
+# 4.                                  Receive 4 bytes, parse as network byte
+#                                     order integer. If it is -1, receive an
+#                                     additional 8 bytes, parse that as network
+#                                     byte order. The result is the length of
+#                                     the data that follows -> SIZE.
+# 5.                                  Receive min(SIZE, 256) bytes -> M1
+# 6.                                  Assert that M1 starts with:
+#                                       b'#CHALLENGE#'
+# 7.                                  Strip that prefix from M1 into -> M2
+# 7.1.                                Parse M2: if it is exactly 20 bytes in
+#                                     length this indicates a legacy server
+#                                     supporting only HMAC-MD5. Otherwise the
+# 7.2.                                preferred digest is looked up from an
+#                                     expected "{digest}" prefix on M2. No prefix
+#                                     or unsupported digest? <- AuthenticationError
+# 7.3.                                Put divined algorithm name in -> D_NAME
+# 8.                                  Compute HMAC-D_NAME of AUTHKEY, M2 -> C_DIGEST
+# 9.                                  Send 4 byte length prefix (net order)
+#                                     followed by C_DIGEST bytes.
+# 10. Receive 4 or 4+8 byte length
+#     prefix (#4 dance) -> SIZE.
+# 11. Receive min(SIZE, 256) -> C_D.
+# 11.1. Parse C_D: legacy servers
+#     accept it as is, "md5" -> D_NAME
+# 11.2. modern servers check the length
+#     of C_D, IF it is 16 bytes?
+# 11.2.1. "md5" -> D_NAME
+#         and skip to step 12.
+# 11.3. longer? expect and parse a "{digest}"
+#     prefix into -> D_NAME.
+#     Strip the prefix and store remaining
+#     bytes in -> C_D.
+# 11.4. Don't like D_NAME? <- AuthenticationError
+# 12. Compute HMAC-D_NAME of AUTHKEY,
+#     MESSAGE into -> M_DIGEST.
+# 13. Compare M_DIGEST == C_D:
+# 14a: Match? Send length prefix &
+#       b'#WELCOME#'
+#    <- RETURN
+# 14b: Mismatch? Send len prefix &
+#       b'#FAILURE#'
+#    <- CLOSE & AuthenticationError
+# 15.                                 Receive 4 or 4+8 byte length prefix (net
+#                                     order) again as in #4 into -> SIZE.
+# 16.                                 Receive min(SIZE, 256) bytes -> M3.
+# 17.                                 Compare M3 == b'#WELCOME#':
+# 17a.                                Match? <- RETURN
+# 17b.                                Mismatch? <- CLOSE & AuthenticationError
+#
+# If this RETURNed, the connection remains open: it has been authenticated.
+#
+# Length prefixes are used consistently. Even on the legacy protocol, this
+# was good fortune and allowed us to evolve the protocol by using the length
+# of the opening challenge or length of the returned digest as a signal as
+# to which protocol the other end supports.
+
+_ALLOWED_DIGESTS = frozenset(
+        {b'md5', b'sha256', b'sha384', b'sha3_256', b'sha3_384'})
+_MAX_DIGEST_LEN = max(len(_) for _ in _ALLOWED_DIGESTS)
+
+# Old hmac-md5 only server versions from Python <=3.11 sent a message of this
+# length. It happens to not match the length of any supported digest so we can
+# use a message of this length to indicate that we should work in backwards
+# compatible md5-only mode without a {digest_name} prefix on our response.
+_MD5ONLY_MESSAGE_LENGTH = 20
+_MD5_DIGEST_LEN = 16
+_LEGACY_LENGTHS = (_MD5ONLY_MESSAGE_LENGTH, _MD5_DIGEST_LEN)
+
+
+def _get_digest_name_and_payload(message):  # type: (bytes) -> tuple[str, bytes]
+    """Returns a digest name and the payload for a response hash.
+
+    If a legacy protocol is detected based on the message length
+    or contents the digest name returned will be empty to indicate
+    legacy mode where MD5 and no digest prefix should be sent.
+    """
+    # modern message format: b"{digest}payload" longer than 20 bytes
+    # legacy message format: 16 or 20 byte b"payload"
+    if len(message) in _LEGACY_LENGTHS:
+        # Either this was a legacy server challenge, or we're processing
+        # a reply from a legacy client that sent an unprefixed 16-byte
+        # HMAC-MD5 response. All messages using the modern protocol will
+        # be longer than either of these lengths.
+        return '', message
+    if (message.startswith(b'{') and
+        (curly := message.find(b'}', 1, _MAX_DIGEST_LEN+2)) > 0):
+        digest = message[1:curly]
+        if digest in _ALLOWED_DIGESTS:
+            payload = message[curly+1:]
+            return digest.decode('ascii'), payload
+    raise AuthenticationError(
+            'unsupported message length, missing digest prefix, '
+            f'or unsupported digest: {message=}')
+
+
+def _create_response(authkey, message):
+    """Create a MAC based on authkey and message
+
+    The MAC algorithm defaults to HMAC-MD5, unless MD5 is not available or
+    the message has a '{digest_name}' prefix. For legacy HMAC-MD5, the response
+    is the raw MAC, otherwise the response is prefixed with '{digest_name}',
+    e.g. b'{sha256}abcdefg...'
+
+    Note: The MAC protects the entire message including the digest_name prefix.
+    """
+    import hmac
+    digest_name = _get_digest_name_and_payload(message)[0]
+    # The MAC protects the entire message: digest header and payload.
+    if not digest_name:
+        # Legacy server without a {digest} prefix on message.
+        # Generate a legacy non-prefixed HMAC-MD5 reply.
+        try:
+            return hmac.new(authkey, message, 'md5').digest()
+        except ValueError:
+            # HMAC-MD5 is not available (FIPS mode?), fall back to
+            # HMAC-SHA2-256 modern protocol. The legacy server probably
+            # doesn't support it and will reject us anyways. :shrug:
+            digest_name = 'sha256'
+    # Modern protocol, indicate the digest used in the reply.
+    response = hmac.new(authkey, message, digest_name).digest()
+    return b'{%s}%s' % (digest_name.encode('ascii'), response)
+
+
+def _verify_challenge(authkey, message, response):
+    """Verify MAC challenge
+
+    If our message did not include a digest_name prefix, the client is allowed
+    to select a stronger digest_name from _ALLOWED_DIGESTS.
+
+    In case our message is prefixed, a client cannot downgrade to a weaker
+    algorithm, because the MAC is calculated over the entire message
+    including the '{digest_name}' prefix.
+    """
+    import hmac
+    response_digest, response_mac = _get_digest_name_and_payload(response)
+    response_digest = response_digest or 'md5'
+    try:
+        expected = hmac.new(authkey, message, response_digest).digest()
+    except ValueError:
+        raise AuthenticationError(f'{response_digest=} unsupported')
+    if len(expected) != len(response_mac):
+        raise AuthenticationError(
+                f'expected {response_digest!r} of length {len(expected)} '
+                f'got {len(response_mac)}')
+    if not hmac.compare_digest(expected, response_mac):
+        raise AuthenticationError('digest received was wrong')
+
+
+def deliver_challenge(connection, authkey: bytes, digest_name='sha256'):
+    if not isinstance(authkey, bytes):
+        raise ValueError(
+            "Authkey must be bytes, not {0!s}".format(type(authkey)))
+    assert MESSAGE_LENGTH > _MD5ONLY_MESSAGE_LENGTH, "protocol constraint"
+    message = os.urandom(MESSAGE_LENGTH)
+    message = b'{%s}%s' % (digest_name.encode('ascii'), message)
+    # Even when sending a challenge to a legacy client that does not support
+    # digest prefixes, they'll take the entire thing as a challenge and
+    # respond to it with a raw HMAC-MD5.
+    connection.send_bytes(_CHALLENGE + message)
+    response = connection.recv_bytes(256)        # reject large message
+    try:
+        _verify_challenge(authkey, message, response)
+    except AuthenticationError:
+        connection.send_bytes(_FAILURE)
+        raise
+    else:
+        connection.send_bytes(_WELCOME)
+
+
+def answer_challenge(connection, authkey: bytes):
+    if not isinstance(authkey, bytes):
+        raise ValueError(
+            "Authkey must be bytes, not {0!s}".format(type(authkey)))
+    message = connection.recv_bytes(256)         # reject large message
+    if not message.startswith(_CHALLENGE):
+        raise AuthenticationError(
+                f'Protocol error, expected challenge: {message=}')
+    message = message[len(_CHALLENGE):]
+    if len(message) < _MD5ONLY_MESSAGE_LENGTH:
+        raise AuthenticationError(f'challenge too short: {len(message)} bytes')
+    digest = _create_response(authkey, message)
+    connection.send_bytes(digest)
+    response = connection.recv_bytes(256)        # reject large message
+    if response != _WELCOME:
+        raise AuthenticationError('digest sent was rejected')
+
+#
+# Support for using xmlrpclib for serialization
+#
+
+class ConnectionWrapper(object):
+    def __init__(self, conn, dumps, loads):
+        self._conn = conn
+        self._dumps = dumps
+        self._loads = loads
+        for attr in ('fileno', 'close', 'poll', 'recv_bytes', 'send_bytes'):
+            obj = getattr(conn, attr)
+            setattr(self, attr, obj)
+    def send(self, obj):
+        s = self._dumps(obj)
+        self._conn.send_bytes(s)
+    def recv(self):
+        s = self._conn.recv_bytes()
+        return self._loads(s)
+
+def _xml_dumps(obj):
+    return xmlrpclib.dumps((obj,), None, None, None, 1).encode('utf-8')
+
+def _xml_loads(s):
+    (obj,), method = xmlrpclib.loads(s.decode('utf-8'))
+    return obj
+
+class XmlListener(Listener):
+    def accept(self):
+        global xmlrpclib
+        import xmlrpc.client as xmlrpclib
+        obj = Listener.accept(self)
+        return ConnectionWrapper(obj, _xml_dumps, _xml_loads)
+
+def XmlClient(*args, **kwds):
+    global xmlrpclib
+    import xmlrpc.client as xmlrpclib
+    return ConnectionWrapper(Client(*args, **kwds), _xml_dumps, _xml_loads)
+
+#
+# Wait
+#
+
+if sys.platform == 'win32':
+
+    def _exhaustive_wait(handles, timeout):
+        # Return ALL handles which are currently signalled.  (Only
+        # returning the first signalled might create starvation issues.)
+        L = list(handles)
+        ready = []
+        # Windows limits WaitForMultipleObjects at 64 handles, and we use a
+        # few for synchronisation, so we switch to batched waits at 60.
+        if len(L) > 60:
+            try:
+                res = _winapi.BatchedWaitForMultipleObjects(L, False, timeout)
+            except TimeoutError:
+                return []
+            ready.extend(L[i] for i in res)
+            if res:
+                L = [h for i, h in enumerate(L) if i > res[0] & i not in res]
+            timeout = 0
+        while L:
+            short_L = L[:60] if len(L) > 60 else L
+            res = _winapi.WaitForMultipleObjects(short_L, False, timeout)
+            if res == WAIT_TIMEOUT:
+                break
+            elif WAIT_OBJECT_0 <= res < WAIT_OBJECT_0 + len(L):
+                res -= WAIT_OBJECT_0
+            elif WAIT_ABANDONED_0 <= res < WAIT_ABANDONED_0 + len(L):
+                res -= WAIT_ABANDONED_0
+            else:
+                raise RuntimeError('Should not get here')
+            ready.append(L[res])
+            L = L[res+1:]
+            timeout = 0
+        return ready
+
+    _ready_errors = {_winapi.ERROR_BROKEN_PIPE, _winapi.ERROR_NETNAME_DELETED}
+
+    def wait(object_list, timeout=None):
+        '''
+        Wait till an object in object_list is ready/readable.
+
+        Returns list of those objects in object_list which are ready/readable.
+        '''
+        if timeout is None:
+            timeout = INFINITE
+        elif timeout < 0:
+            timeout = 0
+        else:
+            timeout = int(timeout * 1000 + 0.5)
+
+        object_list = list(object_list)
+        waithandle_to_obj = {}
+        ov_list = []
+        ready_objects = set()
+        ready_handles = set()
+
+        try:
+            for o in object_list:
+                try:
+                    fileno = getattr(o, 'fileno')
+                except AttributeError:
+                    waithandle_to_obj[o.__index__()] = o
+                else:
+                    # start an overlapped read of length zero
+                    try:
+                        ov, err = _winapi.ReadFile(fileno(), 0, True)
+                    except OSError as e:
+                        ov, err = None, e.winerror
+                        if err not in _ready_errors:
+                            raise
+                    if err == _winapi.ERROR_IO_PENDING:
+                        ov_list.append(ov)
+                        waithandle_to_obj[ov.event] = o
+                    else:
+                        # If o.fileno() is an overlapped pipe handle and
+                        # err == 0 then there is a zero length message
+                        # in the pipe, but it HAS NOT been consumed...
+                        if ov and sys.getwindowsversion()[:2] >= (6, 2):
+                            # ... except on Windows 8 and later, where
+                            # the message HAS been consumed.
+                            try:
+                                _, err = ov.GetOverlappedResult(False)
+                            except OSError as e:
+                                err = e.winerror
+                            if not err and hasattr(o, '_got_empty_message'):
+                                o._got_empty_message = True
+                        ready_objects.add(o)
+                        timeout = 0
+
+            ready_handles = _exhaustive_wait(waithandle_to_obj.keys(), timeout)
+        finally:
+            # request that overlapped reads stop
+            for ov in ov_list:
+                ov.cancel()
+
+            # wait for all overlapped reads to stop
+            for ov in ov_list:
+                try:
+                    _, err = ov.GetOverlappedResult(True)
+                except OSError as e:
+                    err = e.winerror
+                    if err not in _ready_errors:
+                        raise
+                if err != _winapi.ERROR_OPERATION_ABORTED:
+                    o = waithandle_to_obj[ov.event]
+                    ready_objects.add(o)
+                    if err == 0:
+                        # If o.fileno() is an overlapped pipe handle then
+                        # a zero length message HAS been consumed.
+                        if hasattr(o, '_got_empty_message'):
+                            o._got_empty_message = True
+
+        ready_objects.update(waithandle_to_obj[h] for h in ready_handles)
+        return [o for o in object_list if o in ready_objects]
+
+else:
+
+    import selectors
+
+    # poll/select have the advantage of not requiring any extra file
+    # descriptor, contrarily to epoll/kqueue (also, they require a single
+    # syscall).
+    if hasattr(selectors, 'PollSelector'):
+        _WaitSelector = selectors.PollSelector
+    else:
+        _WaitSelector = selectors.SelectSelector
+
+    def wait(object_list, timeout=None):
+        '''
+        Wait till an object in object_list is ready/readable.
+
+        Returns list of those objects in object_list which are ready/readable.
+        '''
+        with _WaitSelector() as selector:
+            for obj in object_list:
+                selector.register(obj, selectors.EVENT_READ)
+
+            if timeout is not None:
+                deadline = time.monotonic() + timeout
+
+            while True:
+                ready = selector.select(timeout)
+                if ready:
+                    return [key.fileobj for (key, events) in ready]
+                else:
+                    if timeout is not None:
+                        timeout = deadline - time.monotonic()
+                        if timeout < 0:
+                            return ready
+
+#
+# Make connection and socket objects shareable if possible
+#
+
+if sys.platform == 'win32':
+    def reduce_connection(conn):
+        handle = conn.fileno()
+        with socket.fromfd(handle, socket.AF_INET, socket.SOCK_STREAM) as s:
+            from . import resource_sharer
+            ds = resource_sharer.DupSocket(s)
+            return rebuild_connection, (ds, conn.readable, conn.writable)
+    def rebuild_connection(ds, readable, writable):
+        sock = ds.detach()
+        return Connection(sock.detach(), readable, writable)
+    reduction.register(Connection, reduce_connection)
+
+    def reduce_pipe_connection(conn):
+        access = ((_winapi.FILE_GENERIC_READ if conn.readable else 0) |
+                  (_winapi.FILE_GENERIC_WRITE if conn.writable else 0))
+        dh = reduction.DupHandle(conn.fileno(), access)
+        return rebuild_pipe_connection, (dh, conn.readable, conn.writable)
+    def rebuild_pipe_connection(dh, readable, writable):
+        handle = dh.detach()
+        return PipeConnection(handle, readable, writable)
+    reduction.register(PipeConnection, reduce_pipe_connection)
+
+else:
+    def reduce_connection(conn):
+        df = reduction.DupFd(conn.fileno())
+        return rebuild_connection, (df, conn.readable, conn.writable)
+    def rebuild_connection(df, readable, writable):
+        fd = df.detach()
+        return Connection(fd, readable, writable)
+    reduction.register(Connection, reduce_connection)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/context.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/context.py
new file mode 100644
index 0000000000000000000000000000000000000000..5fa6d7e48611f03993b4949b85b415f95917ab0d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/context.py
@@ -0,0 +1,383 @@
+import os
+import sys
+import threading
+
+from . import process
+from . import reduction
+
+__all__ = ()
+
+#
+# Exceptions
+#
+
+class ProcessError(Exception):
+    pass
+
+class BufferTooShort(ProcessError):
+    pass
+
+class TimeoutError(ProcessError):
+    pass
+
+class AuthenticationError(ProcessError):
+    pass
+
+#
+# Base type for contexts. Bound methods of an instance of this type are included in __all__ of __init__.py
+#
+
+class BaseContext(object):
+
+    ProcessError = ProcessError
+    BufferTooShort = BufferTooShort
+    TimeoutError = TimeoutError
+    AuthenticationError = AuthenticationError
+
+    current_process = staticmethod(process.current_process)
+    parent_process = staticmethod(process.parent_process)
+    active_children = staticmethod(process.active_children)
+
+    def cpu_count(self):
+        '''Returns the number of CPUs in the system'''
+        num = os.cpu_count()
+        if num is None:
+            raise NotImplementedError('cannot determine number of cpus')
+        else:
+            return num
+
+    def Manager(self):
+        '''Returns a manager associated with a running server process
+
+        The managers methods such as `Lock()`, `Condition()` and `Queue()`
+        can be used to create shared objects.
+        '''
+        from .managers import SyncManager
+        m = SyncManager(ctx=self.get_context())
+        m.start()
+        return m
+
+    def Pipe(self, duplex=True):
+        '''Returns two connection object connected by a pipe'''
+        from .connection import Pipe
+        return Pipe(duplex)
+
+    def Lock(self):
+        '''Returns a non-recursive lock object'''
+        from .synchronize import Lock
+        return Lock(ctx=self.get_context())
+
+    def RLock(self):
+        '''Returns a recursive lock object'''
+        from .synchronize import RLock
+        return RLock(ctx=self.get_context())
+
+    def Condition(self, lock=None):
+        '''Returns a condition object'''
+        from .synchronize import Condition
+        return Condition(lock, ctx=self.get_context())
+
+    def Semaphore(self, value=1):
+        '''Returns a semaphore object'''
+        from .synchronize import Semaphore
+        return Semaphore(value, ctx=self.get_context())
+
+    def BoundedSemaphore(self, value=1):
+        '''Returns a bounded semaphore object'''
+        from .synchronize import BoundedSemaphore
+        return BoundedSemaphore(value, ctx=self.get_context())
+
+    def Event(self):
+        '''Returns an event object'''
+        from .synchronize import Event
+        return Event(ctx=self.get_context())
+
+    def Barrier(self, parties, action=None, timeout=None):
+        '''Returns a barrier object'''
+        from .synchronize import Barrier
+        return Barrier(parties, action, timeout, ctx=self.get_context())
+
+    def Queue(self, maxsize=0):
+        '''Returns a queue object'''
+        from .queues import Queue
+        return Queue(maxsize, ctx=self.get_context())
+
+    def JoinableQueue(self, maxsize=0):
+        '''Returns a queue object'''
+        from .queues import JoinableQueue
+        return JoinableQueue(maxsize, ctx=self.get_context())
+
+    def SimpleQueue(self):
+        '''Returns a queue object'''
+        from .queues import SimpleQueue
+        return SimpleQueue(ctx=self.get_context())
+
+    def Pool(self, processes=None, initializer=None, initargs=(),
+             maxtasksperchild=None):
+        '''Returns a process pool object'''
+        from .pool import Pool
+        return Pool(processes, initializer, initargs, maxtasksperchild,
+                    context=self.get_context())
+
+    def RawValue(self, typecode_or_type, *args):
+        '''Returns a shared object'''
+        from .sharedctypes import RawValue
+        return RawValue(typecode_or_type, *args)
+
+    def RawArray(self, typecode_or_type, size_or_initializer):
+        '''Returns a shared array'''
+        from .sharedctypes import RawArray
+        return RawArray(typecode_or_type, size_or_initializer)
+
+    def Value(self, typecode_or_type, *args, lock=True):
+        '''Returns a synchronized shared object'''
+        from .sharedctypes import Value
+        return Value(typecode_or_type, *args, lock=lock,
+                     ctx=self.get_context())
+
+    def Array(self, typecode_or_type, size_or_initializer, *, lock=True):
+        '''Returns a synchronized shared array'''
+        from .sharedctypes import Array
+        return Array(typecode_or_type, size_or_initializer, lock=lock,
+                     ctx=self.get_context())
+
+    def freeze_support(self):
+        '''Check whether this is a fake forked process in a frozen executable.
+        If so then run code specified by commandline and exit.
+        '''
+        # gh-140814: allow_none=True avoids locking in the default start
+        # method, which would cause a later set_start_method() to fail.
+        # None is safe to pass through: spawn.freeze_support()
+        # independently detects whether this process is a spawned
+        # child, so the start method check here is only an optimization.
+        if (getattr(sys, 'frozen', False)
+                and self.get_start_method(allow_none=True) in ('spawn', None)):
+            from .spawn import freeze_support
+            freeze_support()
+
+    def get_logger(self):
+        '''Return package logger -- if it does not already exist then
+        it is created.
+        '''
+        from .util import get_logger
+        return get_logger()
+
+    def log_to_stderr(self, level=None):
+        '''Turn on logging and add a handler which prints to stderr'''
+        from .util import log_to_stderr
+        return log_to_stderr(level)
+
+    def allow_connection_pickling(self):
+        '''Install support for sending connections and sockets
+        between processes
+        '''
+        # This is undocumented.  In previous versions of multiprocessing
+        # its only effect was to make socket objects inheritable on Windows.
+        from . import connection  # noqa: F401
+
+    def set_executable(self, executable):
+        '''Sets the path to a python.exe or pythonw.exe binary used to run
+        child processes instead of sys.executable when using the 'spawn'
+        start method.  Useful for people embedding Python.
+        '''
+        from .spawn import set_executable
+        set_executable(executable)
+
+    def set_forkserver_preload(self, module_names):
+        '''Set list of module names to try to load in forkserver process.
+        This is really just a hint.
+        '''
+        from .forkserver import set_forkserver_preload
+        set_forkserver_preload(module_names)
+
+    def get_context(self, method=None):
+        if method is None:
+            return self
+        try:
+            ctx = _concrete_contexts[method]
+        except KeyError:
+            raise ValueError('cannot find context for %r' % method) from None
+        ctx._check_available()
+        return ctx
+
+    def get_start_method(self, allow_none=False):
+        return self._name
+
+    def set_start_method(self, method, force=False):
+        raise ValueError('cannot set start method of concrete context')
+
+    @property
+    def reducer(self):
+        '''Controls how objects will be reduced to a form that can be
+        shared with other processes.'''
+        return globals().get('reduction')
+
+    @reducer.setter
+    def reducer(self, reduction):
+        globals()['reduction'] = reduction
+
+    def _check_available(self):
+        pass
+
+#
+# Type of default context -- underlying context can be set at most once
+#
+
+class Process(process.BaseProcess):
+    _start_method = None
+    @staticmethod
+    def _Popen(process_obj):
+        return _default_context.get_context().Process._Popen(process_obj)
+
+    @staticmethod
+    def _after_fork():
+        return _default_context.get_context().Process._after_fork()
+
+class DefaultContext(BaseContext):
+    Process = Process
+
+    def __init__(self, context):
+        self._default_context = context
+        self._actual_context = None
+
+    def get_context(self, method=None):
+        if method is None:
+            if self._actual_context is None:
+                self._actual_context = self._default_context
+            return self._actual_context
+        else:
+            return super().get_context(method)
+
+    def set_start_method(self, method, force=False):
+        if self._actual_context is not None and not force:
+            raise RuntimeError('context has already been set')
+        if method is None and force:
+            self._actual_context = None
+            return
+        self._actual_context = self.get_context(method)
+
+    def get_start_method(self, allow_none=False):
+        if self._actual_context is None:
+            if allow_none:
+                return None
+            self._actual_context = self._default_context
+        return self._actual_context._name
+
+    def get_all_start_methods(self):
+        """Returns a list of the supported start methods, default first."""
+        default = self._default_context.get_start_method()
+        start_method_names = [default]
+        start_method_names.extend(
+            name for name in _concrete_contexts if name != default
+        )
+        return start_method_names
+
+
+#
+# Context types for fixed start method
+#
+
+if sys.platform != 'win32':
+
+    class ForkProcess(process.BaseProcess):
+        _start_method = 'fork'
+        @staticmethod
+        def _Popen(process_obj):
+            from .popen_fork import Popen
+            return Popen(process_obj)
+
+    class SpawnProcess(process.BaseProcess):
+        _start_method = 'spawn'
+        @staticmethod
+        def _Popen(process_obj):
+            from .popen_spawn_posix import Popen
+            return Popen(process_obj)
+
+        @staticmethod
+        def _after_fork():
+            # process is spawned, nothing to do
+            pass
+
+    class ForkServerProcess(process.BaseProcess):
+        _start_method = 'forkserver'
+        @staticmethod
+        def _Popen(process_obj):
+            from .popen_forkserver import Popen
+            return Popen(process_obj)
+
+    class ForkContext(BaseContext):
+        _name = 'fork'
+        Process = ForkProcess
+
+    class SpawnContext(BaseContext):
+        _name = 'spawn'
+        Process = SpawnProcess
+
+    class ForkServerContext(BaseContext):
+        _name = 'forkserver'
+        Process = ForkServerProcess
+        def _check_available(self):
+            if not reduction.HAVE_SEND_HANDLE:
+                raise ValueError('forkserver start method not available')
+
+    _concrete_contexts = {
+        'fork': ForkContext(),
+        'spawn': SpawnContext(),
+        'forkserver': ForkServerContext(),
+    }
+    # bpo-33725: running arbitrary code after fork() is no longer reliable
+    # on macOS since macOS 10.14 (Mojave). Use spawn by default instead.
+    # gh-84559: We changed everyones default to a thread safeish one in 3.14.
+    if reduction.HAVE_SEND_HANDLE and sys.platform != 'darwin':
+        _default_context = DefaultContext(_concrete_contexts['forkserver'])
+    else:
+        _default_context = DefaultContext(_concrete_contexts['spawn'])
+
+else:  # Windows
+
+    class SpawnProcess(process.BaseProcess):
+        _start_method = 'spawn'
+        @staticmethod
+        def _Popen(process_obj):
+            from .popen_spawn_win32 import Popen
+            return Popen(process_obj)
+
+        @staticmethod
+        def _after_fork():
+            # process is spawned, nothing to do
+            pass
+
+    class SpawnContext(BaseContext):
+        _name = 'spawn'
+        Process = SpawnProcess
+
+    _concrete_contexts = {
+        'spawn': SpawnContext(),
+    }
+    _default_context = DefaultContext(_concrete_contexts['spawn'])
+
+#
+# Force the start method
+#
+
+def _force_start_method(method):
+    _default_context._actual_context = _concrete_contexts[method]
+
+#
+# Check that the current thread is spawning a child process
+#
+
+_tls = threading.local()
+
+def get_spawning_popen():
+    return getattr(_tls, 'spawning_popen', None)
+
+def set_spawning_popen(popen):
+    _tls.spawning_popen = popen
+
+def assert_spawning(obj):
+    if get_spawning_popen() is None:
+        raise RuntimeError(
+            '%s objects should only be shared between processes'
+            ' through inheritance' % type(obj).__name__
+            )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/forkserver.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/forkserver.py
new file mode 100644
index 0000000000000000000000000000000000000000..e431b3f12988067b1910bd1270ddfae3a206a111
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/forkserver.py
@@ -0,0 +1,429 @@
+import atexit
+import errno
+import os
+import selectors
+import signal
+import socket
+import struct
+import sys
+import threading
+import warnings
+
+from . import AuthenticationError
+from . import connection
+from . import process
+from .context import reduction
+from . import resource_tracker
+from . import spawn
+from . import util
+
+__all__ = ['ensure_running', 'get_inherited_fds', 'connect_to_new_process',
+           'set_forkserver_preload']
+
+#
+#
+#
+
+MAXFDS_TO_SEND = 256
+SIGNED_STRUCT = struct.Struct('q')     # large enough for pid_t
+_AUTHKEY_LEN = 32  # <= PIPEBUF so it fits a single write to an empty pipe.
+
+#
+# Forkserver class
+#
+
+class ForkServer(object):
+
+    def __init__(self):
+        self._forkserver_authkey = None
+        self._forkserver_address = None
+        self._forkserver_alive_fd = None
+        self._forkserver_pid = None
+        self._inherited_fds = None
+        self._lock = threading.Lock()
+        self._preload_modules = ['__main__']
+
+    def _stop(self):
+        # Method used by unit tests to stop the server
+        with self._lock:
+            self._stop_unlocked()
+
+    def _stop_unlocked(self):
+        if self._forkserver_pid is None:
+            return
+
+        # close the "alive" file descriptor asks the server to stop
+        os.close(self._forkserver_alive_fd)
+        self._forkserver_alive_fd = None
+
+        os.waitpid(self._forkserver_pid, 0)
+        self._forkserver_pid = None
+
+        if not util.is_abstract_socket_namespace(self._forkserver_address):
+            os.unlink(self._forkserver_address)
+        self._forkserver_address = None
+        self._forkserver_authkey = None
+
+    def set_forkserver_preload(self, modules_names):
+        '''Set list of module names to try to load in forkserver process.'''
+        if not all(type(mod) is str for mod in modules_names):
+            raise TypeError('module_names must be a list of strings')
+        self._preload_modules = modules_names
+
+    def get_inherited_fds(self):
+        '''Return list of fds inherited from parent process.
+
+        This returns None if the current process was not started by fork
+        server.
+        '''
+        return self._inherited_fds
+
+    def connect_to_new_process(self, fds):
+        '''Request forkserver to create a child process.
+
+        Returns a pair of fds (status_r, data_w).  The calling process can read
+        the child process's pid and (eventually) its returncode from status_r.
+        The calling process should write to data_w the pickled preparation and
+        process data.
+        '''
+        self.ensure_running()
+        assert self._forkserver_authkey
+        if len(fds) + 4 >= MAXFDS_TO_SEND:
+            raise ValueError('too many fds')
+        with socket.socket(socket.AF_UNIX) as client:
+            client.connect(self._forkserver_address)
+            parent_r, child_w = os.pipe()
+            child_r, parent_w = os.pipe()
+            allfds = [child_r, child_w, self._forkserver_alive_fd,
+                      resource_tracker.getfd()]
+            allfds += fds
+            try:
+                client.setblocking(True)
+                wrapped_client = connection.Connection(client.fileno())
+                # The other side of this exchange happens in the child as
+                # implemented in main().
+                try:
+                    connection.answer_challenge(
+                            wrapped_client, self._forkserver_authkey)
+                    connection.deliver_challenge(
+                            wrapped_client, self._forkserver_authkey)
+                finally:
+                    wrapped_client._detach()
+                    del wrapped_client
+                reduction.sendfds(client, allfds)
+                return parent_r, parent_w
+            except:
+                os.close(parent_r)
+                os.close(parent_w)
+                raise
+            finally:
+                os.close(child_r)
+                os.close(child_w)
+
+    def ensure_running(self):
+        '''Make sure that a fork server is running.
+
+        This can be called from any process.  Note that usually a child
+        process will just reuse the forkserver started by its parent, so
+        ensure_running() will do nothing.
+        '''
+        with self._lock:
+            resource_tracker.ensure_running()
+            if self._forkserver_pid is not None:
+                # forkserver was launched before, is it still running?
+                pid, status = os.waitpid(self._forkserver_pid, os.WNOHANG)
+                if not pid:
+                    # still alive
+                    return
+                # dead, launch it again
+                os.close(self._forkserver_alive_fd)
+                self._forkserver_authkey = None
+                self._forkserver_address = None
+                self._forkserver_alive_fd = None
+                self._forkserver_pid = None
+
+            # gh-144503: sys_argv is passed as real argv elements after the
+            # ``-c cmd`` rather than repr'd into main_kws so that a large
+            # parent sys.argv cannot push the single ``-c`` command string
+            # over the OS per-argument length limit (MAX_ARG_STRLEN on Linux).
+            # The child sees them as sys.argv[1:].
+            cmd = ('import sys; '
+                   'from multiprocessing.forkserver import main; '
+                   'main(%d, %d, %r, sys_argv=sys.argv[1:], **%r)')
+
+            main_kws = {}
+            sys_argv = None
+            if self._preload_modules:
+                data = spawn.get_preparation_data('ignore')
+                if 'sys_path' in data:
+                    main_kws['sys_path'] = data['sys_path']
+                if 'init_main_from_path' in data:
+                    main_kws['main_path'] = data['init_main_from_path']
+                if 'sys_argv' in data:
+                    sys_argv = data['sys_argv']
+
+            with socket.socket(socket.AF_UNIX) as listener:
+                address = connection.arbitrary_address('AF_UNIX')
+                listener.bind(address)
+                if not util.is_abstract_socket_namespace(address):
+                    os.chmod(address, 0o600)
+                listener.listen()
+
+                # all client processes own the write end of the "alive" pipe;
+                # when they all terminate the read end becomes ready.
+                alive_r, alive_w = os.pipe()
+                # A short lived pipe to initialize the forkserver authkey.
+                authkey_r, authkey_w = os.pipe()
+                try:
+                    fds_to_pass = [listener.fileno(), alive_r, authkey_r]
+                    main_kws['authkey_r'] = authkey_r
+                    cmd %= (listener.fileno(), alive_r, self._preload_modules,
+                            main_kws)
+                    exe = spawn.get_executable()
+                    args = [exe] + util._args_from_interpreter_flags()
+                    args += ['-c', cmd]
+                    if sys_argv is not None:
+                        args += sys_argv
+                    pid = util.spawnv_passfds(exe, args, fds_to_pass)
+                except:
+                    os.close(alive_w)
+                    os.close(authkey_w)
+                    raise
+                finally:
+                    os.close(alive_r)
+                    os.close(authkey_r)
+                # Authenticate our control socket to prevent access from
+                # processes we have not shared this key with.
+                try:
+                    self._forkserver_authkey = os.urandom(_AUTHKEY_LEN)
+                    os.write(authkey_w, self._forkserver_authkey)
+                finally:
+                    os.close(authkey_w)
+                self._forkserver_address = address
+                self._forkserver_alive_fd = alive_w
+                self._forkserver_pid = pid
+
+#
+#
+#
+
+def main(listener_fd, alive_r, preload, main_path=None, sys_path=None,
+         *, sys_argv=None, authkey_r=None):
+    """Run forkserver."""
+    if authkey_r is not None:
+        try:
+            authkey = os.read(authkey_r, _AUTHKEY_LEN)
+            assert len(authkey) == _AUTHKEY_LEN, f'{len(authkey)} < {_AUTHKEY_LEN}'
+        finally:
+            os.close(authkey_r)
+    else:
+        authkey = b''
+
+    if preload:
+        if sys_argv is not None:
+            sys.argv[:] = sys_argv
+        if sys_path is not None:
+            sys.path[:] = sys_path
+        if '__main__' in preload and main_path is not None:
+            process.current_process()._inheriting = True
+            try:
+                spawn.import_main_path(main_path)
+            finally:
+                del process.current_process()._inheriting
+        for modname in preload:
+            try:
+                __import__(modname)
+            except ImportError:
+                pass
+
+        # gh-135335: flush stdout/stderr in case any of the preloaded modules
+        # wrote to them, otherwise children might inherit buffered data
+        util._flush_std_streams()
+
+    util._close_stdin()
+
+    sig_r, sig_w = os.pipe()
+    os.set_blocking(sig_r, False)
+    os.set_blocking(sig_w, False)
+
+    def sigchld_handler(*_unused):
+        # Dummy signal handler, doesn't do anything
+        pass
+
+    handlers = {
+        # unblocking SIGCHLD allows the wakeup fd to notify our event loop
+        signal.SIGCHLD: sigchld_handler,
+        # protect the process from ^C
+        signal.SIGINT: signal.SIG_IGN,
+        }
+    old_handlers = {sig: signal.signal(sig, val)
+                    for (sig, val) in handlers.items()}
+
+    # calling os.write() in the Python signal handler is racy
+    signal.set_wakeup_fd(sig_w)
+
+    # map child pids to client fds
+    pid_to_fd = {}
+
+    with socket.socket(socket.AF_UNIX, fileno=listener_fd) as listener, \
+         selectors.DefaultSelector() as selector:
+        _forkserver._forkserver_address = listener.getsockname()
+
+        selector.register(listener, selectors.EVENT_READ)
+        selector.register(alive_r, selectors.EVENT_READ)
+        selector.register(sig_r, selectors.EVENT_READ)
+
+        while True:
+            try:
+                while True:
+                    rfds = [key.fileobj for (key, events) in selector.select()]
+                    if rfds:
+                        break
+
+                if alive_r in rfds:
+                    # EOF because no more client processes left
+                    assert os.read(alive_r, 1) == b'', "Not at EOF?"
+                    raise SystemExit
+
+                if sig_r in rfds:
+                    # Got SIGCHLD
+                    os.read(sig_r, 65536)  # exhaust
+                    while True:
+                        # Scan for child processes
+                        try:
+                            pid, sts = os.waitpid(-1, os.WNOHANG)
+                        except ChildProcessError:
+                            break
+                        if pid == 0:
+                            break
+                        child_w = pid_to_fd.pop(pid, None)
+                        if child_w is not None:
+                            returncode = os.waitstatus_to_exitcode(sts)
+
+                            # Send exit code to client process
+                            try:
+                                write_signed(child_w, returncode)
+                            except BrokenPipeError:
+                                # client vanished
+                                pass
+                            os.close(child_w)
+                        else:
+                            # This shouldn't happen really
+                            warnings.warn('forkserver: waitpid returned '
+                                          'unexpected pid %d' % pid)
+
+                if listener in rfds:
+                    # Incoming fork request
+                    with listener.accept()[0] as s:
+                        try:
+                            if authkey:
+                                wrapped_s = connection.Connection(s.fileno())
+                                # The other side of this exchange happens in
+                                # in connect_to_new_process().
+                                try:
+                                    connection.deliver_challenge(
+                                            wrapped_s, authkey)
+                                    connection.answer_challenge(
+                                            wrapped_s, authkey)
+                                finally:
+                                    wrapped_s._detach()
+                                    del wrapped_s
+                            # Receive fds from client
+                            fds = reduction.recvfds(s, MAXFDS_TO_SEND + 1)
+                        except (EOFError, BrokenPipeError, AuthenticationError):
+                            s.close()
+                            continue
+                        if len(fds) > MAXFDS_TO_SEND:
+                            raise RuntimeError(
+                                "Too many ({0:n}) fds to send".format(
+                                    len(fds)))
+                        child_r, child_w, *fds = fds
+                        s.close()
+                        pid = os.fork()
+                        if pid == 0:
+                            # Child
+                            code = 1
+                            try:
+                                listener.close()
+                                selector.close()
+                                unused_fds = [alive_r, child_w, sig_r, sig_w]
+                                unused_fds.extend(pid_to_fd.values())
+                                atexit._clear()
+                                atexit.register(util._exit_function)
+                                code = _serve_one(child_r, fds,
+                                                  unused_fds,
+                                                  old_handlers)
+                            except Exception:
+                                sys.excepthook(*sys.exc_info())
+                                sys.stderr.flush()
+                            finally:
+                                atexit._run_exitfuncs()
+                                os._exit(code)
+                        else:
+                            # Send pid to client process
+                            try:
+                                write_signed(child_w, pid)
+                            except BrokenPipeError:
+                                # client vanished
+                                pass
+                            pid_to_fd[pid] = child_w
+                            os.close(child_r)
+                            for fd in fds:
+                                os.close(fd)
+
+            except OSError as e:
+                if e.errno != errno.ECONNABORTED:
+                    raise
+
+
+def _serve_one(child_r, fds, unused_fds, handlers):
+    # close unnecessary stuff and reset signal handlers
+    signal.set_wakeup_fd(-1)
+    for sig, val in handlers.items():
+        signal.signal(sig, val)
+    for fd in unused_fds:
+        os.close(fd)
+
+    (_forkserver._forkserver_alive_fd,
+     resource_tracker._resource_tracker._fd,
+     *_forkserver._inherited_fds) = fds
+
+    # Run process object received over pipe
+    parent_sentinel = os.dup(child_r)
+    code = spawn._main(child_r, parent_sentinel)
+
+    return code
+
+
+#
+# Read and write signed numbers
+#
+
+def read_signed(fd):
+    data = bytearray(SIGNED_STRUCT.size)
+    unread = memoryview(data)
+    while unread:
+        count = os.readinto(fd, unread)
+        if count == 0:
+            raise EOFError('unexpected EOF')
+        unread = unread[count:]
+
+    return SIGNED_STRUCT.unpack(data)[0]
+
+def write_signed(fd, n):
+    msg = SIGNED_STRUCT.pack(n)
+    while msg:
+        nbytes = os.write(fd, msg)
+        if nbytes == 0:
+            raise RuntimeError('should not get here')
+        msg = msg[nbytes:]
+
+#
+#
+#
+
+_forkserver = ForkServer()
+ensure_running = _forkserver.ensure_running
+get_inherited_fds = _forkserver.get_inherited_fds
+connect_to_new_process = _forkserver.connect_to_new_process
+set_forkserver_preload = _forkserver.set_forkserver_preload
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/heap.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/heap.py
new file mode 100644
index 0000000000000000000000000000000000000000..6217dfe12689b379f2dad6f1e4bc3bbf6af8f60a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/heap.py
@@ -0,0 +1,337 @@
+#
+# Module which supports allocation of memory from an mmap
+#
+# multiprocessing/heap.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+import bisect
+from collections import defaultdict
+import mmap
+import os
+import sys
+import tempfile
+import threading
+
+from .context import reduction, assert_spawning
+from . import util
+
+__all__ = ['BufferWrapper']
+
+#
+# Inheritable class which wraps an mmap, and from which blocks can be allocated
+#
+
+if sys.platform == 'win32':
+
+    import _winapi
+
+    class Arena(object):
+        """
+        A shared memory area backed by anonymous memory (Windows).
+        """
+
+        _rand = tempfile._RandomNameSequence()
+
+        def __init__(self, size):
+            self.size = size
+            for i in range(100):
+                name = 'pym-%d-%s' % (os.getpid(), next(self._rand))
+                buf = mmap.mmap(-1, size, tagname=name)
+                if _winapi.GetLastError() == 0:
+                    break
+                # We have reopened a preexisting mmap.
+                buf.close()
+            else:
+                raise FileExistsError('Cannot find name for new mmap')
+            self.name = name
+            self.buffer = buf
+            self._state = (self.size, self.name)
+
+        def __getstate__(self):
+            assert_spawning(self)
+            return self._state
+
+        def __setstate__(self, state):
+            self.size, self.name = self._state = state
+            # Reopen existing mmap
+            self.buffer = mmap.mmap(-1, self.size, tagname=self.name)
+            # XXX Temporarily preventing buildbot failures while determining
+            # XXX the correct long-term fix. See issue 23060
+            #assert _winapi.GetLastError() == _winapi.ERROR_ALREADY_EXISTS
+
+else:
+
+    class Arena(object):
+        """
+        A shared memory area backed by a temporary file (POSIX).
+        """
+
+        if sys.platform == 'linux':
+            _dir_candidates = ['/dev/shm']
+        else:
+            _dir_candidates = []
+
+        def __init__(self, size, fd=-1):
+            self.size = size
+            self.fd = fd
+            if fd == -1:
+                # Arena is created anew (if fd != -1, it means we're coming
+                # from rebuild_arena() below)
+                self.fd, name = tempfile.mkstemp(
+                     prefix='pym-%d-'%os.getpid(),
+                     dir=self._choose_dir(size))
+                os.unlink(name)
+                util.Finalize(self, os.close, (self.fd,))
+                os.ftruncate(self.fd, size)
+            self.buffer = mmap.mmap(self.fd, self.size)
+
+        def _choose_dir(self, size):
+            # Choose a non-storage backed directory if possible,
+            # to improve performance
+            for d in self._dir_candidates:
+                st = os.statvfs(d)
+                if st.f_bavail * st.f_frsize >= size:  # enough free space?
+                    return d
+            return util.get_temp_dir()
+
+    def reduce_arena(a):
+        if a.fd == -1:
+            raise ValueError('Arena is unpicklable because '
+                             'forking was enabled when it was created')
+        return rebuild_arena, (a.size, reduction.DupFd(a.fd))
+
+    def rebuild_arena(size, dupfd):
+        return Arena(size, dupfd.detach())
+
+    reduction.register(Arena, reduce_arena)
+
+#
+# Class allowing allocation of chunks of memory from arenas
+#
+
+class Heap(object):
+
+    # Minimum malloc() alignment
+    _alignment = 8
+
+    _DISCARD_FREE_SPACE_LARGER_THAN = 4 * 1024 ** 2  # 4 MB
+    _DOUBLE_ARENA_SIZE_UNTIL = 4 * 1024 ** 2
+
+    def __init__(self, size=mmap.PAGESIZE):
+        self._lastpid = os.getpid()
+        self._lock = threading.Lock()
+        # Current arena allocation size
+        self._size = size
+        # A sorted list of available block sizes in arenas
+        self._lengths = []
+
+        # Free block management:
+        # - map each block size to a list of `(Arena, start, stop)` blocks
+        self._len_to_seq = {}
+        # - map `(Arena, start)` tuple to the `(Arena, start, stop)` block
+        #   starting at that offset
+        self._start_to_block = {}
+        # - map `(Arena, stop)` tuple to the `(Arena, start, stop)` block
+        #   ending at that offset
+        self._stop_to_block = {}
+
+        # Map arenas to their `(Arena, start, stop)` blocks in use
+        self._allocated_blocks = defaultdict(set)
+        self._arenas = []
+
+        # List of pending blocks to free - see comment in free() below
+        self._pending_free_blocks = []
+
+        # Statistics
+        self._n_mallocs = 0
+        self._n_frees = 0
+
+    @staticmethod
+    def _roundup(n, alignment):
+        # alignment must be a power of 2
+        mask = alignment - 1
+        return (n + mask) & ~mask
+
+    def _new_arena(self, size):
+        # Create a new arena with at least the given *size*
+        length = self._roundup(max(self._size, size), mmap.PAGESIZE)
+        # We carve larger and larger arenas, for efficiency, until we
+        # reach a large-ish size (roughly L3 cache-sized)
+        if self._size < self._DOUBLE_ARENA_SIZE_UNTIL:
+            self._size *= 2
+        util.info('allocating a new mmap of length %d', length)
+        arena = Arena(length)
+        self._arenas.append(arena)
+        return (arena, 0, length)
+
+    def _discard_arena(self, arena):
+        # Possibly delete the given (unused) arena
+        length = arena.size
+        # Reusing an existing arena is faster than creating a new one, so
+        # we only reclaim space if it's large enough.
+        if length < self._DISCARD_FREE_SPACE_LARGER_THAN:
+            return
+        blocks = self._allocated_blocks.pop(arena)
+        assert not blocks
+        del self._start_to_block[(arena, 0)]
+        del self._stop_to_block[(arena, length)]
+        self._arenas.remove(arena)
+        seq = self._len_to_seq[length]
+        seq.remove((arena, 0, length))
+        if not seq:
+            del self._len_to_seq[length]
+            self._lengths.remove(length)
+
+    def _malloc(self, size):
+        # returns a large enough block -- it might be much larger
+        i = bisect.bisect_left(self._lengths, size)
+        if i == len(self._lengths):
+            return self._new_arena(size)
+        else:
+            length = self._lengths[i]
+            seq = self._len_to_seq[length]
+            block = seq.pop()
+            if not seq:
+                del self._len_to_seq[length], self._lengths[i]
+
+        (arena, start, stop) = block
+        del self._start_to_block[(arena, start)]
+        del self._stop_to_block[(arena, stop)]
+        return block
+
+    def _add_free_block(self, block):
+        # make block available and try to merge with its neighbours in the arena
+        (arena, start, stop) = block
+
+        try:
+            prev_block = self._stop_to_block[(arena, start)]
+        except KeyError:
+            pass
+        else:
+            start, _ = self._absorb(prev_block)
+
+        try:
+            next_block = self._start_to_block[(arena, stop)]
+        except KeyError:
+            pass
+        else:
+            _, stop = self._absorb(next_block)
+
+        block = (arena, start, stop)
+        length = stop - start
+
+        try:
+            self._len_to_seq[length].append(block)
+        except KeyError:
+            self._len_to_seq[length] = [block]
+            bisect.insort(self._lengths, length)
+
+        self._start_to_block[(arena, start)] = block
+        self._stop_to_block[(arena, stop)] = block
+
+    def _absorb(self, block):
+        # deregister this block so it can be merged with a neighbour
+        (arena, start, stop) = block
+        del self._start_to_block[(arena, start)]
+        del self._stop_to_block[(arena, stop)]
+
+        length = stop - start
+        seq = self._len_to_seq[length]
+        seq.remove(block)
+        if not seq:
+            del self._len_to_seq[length]
+            self._lengths.remove(length)
+
+        return start, stop
+
+    def _remove_allocated_block(self, block):
+        arena, start, stop = block
+        blocks = self._allocated_blocks[arena]
+        blocks.remove((start, stop))
+        if not blocks:
+            # Arena is entirely free, discard it from this process
+            self._discard_arena(arena)
+
+    def _free_pending_blocks(self):
+        # Free all the blocks in the pending list - called with the lock held.
+        while True:
+            try:
+                block = self._pending_free_blocks.pop()
+            except IndexError:
+                break
+            self._add_free_block(block)
+            self._remove_allocated_block(block)
+
+    def free(self, block):
+        # free a block returned by malloc()
+        # Since free() can be called asynchronously by the GC, it could happen
+        # that it's called while self._lock is held: in that case,
+        # self._lock.acquire() would deadlock (issue #12352). To avoid that, a
+        # trylock is used instead, and if the lock can't be acquired
+        # immediately, the block is added to a list of blocks to be freed
+        # synchronously sometimes later from malloc() or free(), by calling
+        # _free_pending_blocks() (appending and retrieving from a list is not
+        # strictly thread-safe but under CPython it's atomic thanks to the GIL).
+        if os.getpid() != self._lastpid:
+            raise ValueError(
+                "My pid ({0:n}) is not last pid {1:n}".format(
+                    os.getpid(),self._lastpid))
+        if not self._lock.acquire(False):
+            # can't acquire the lock right now, add the block to the list of
+            # pending blocks to free
+            self._pending_free_blocks.append(block)
+        else:
+            # we hold the lock
+            try:
+                self._n_frees += 1
+                self._free_pending_blocks()
+                self._add_free_block(block)
+                self._remove_allocated_block(block)
+            finally:
+                self._lock.release()
+
+    def malloc(self, size):
+        # return a block of right size (possibly rounded up)
+        if size < 0:
+            raise ValueError("Size {0:n} out of range".format(size))
+        if sys.maxsize <= size:
+            raise OverflowError("Size {0:n} too large".format(size))
+        if os.getpid() != self._lastpid:
+            self.__init__()                     # reinitialize after fork
+        with self._lock:
+            self._n_mallocs += 1
+            # allow pending blocks to be marked available
+            self._free_pending_blocks()
+            size = self._roundup(max(size, 1), self._alignment)
+            (arena, start, stop) = self._malloc(size)
+            real_stop = start + size
+            if real_stop < stop:
+                # if the returned block is larger than necessary, mark
+                # the remainder available
+                self._add_free_block((arena, real_stop, stop))
+            self._allocated_blocks[arena].add((start, real_stop))
+            return (arena, start, real_stop)
+
+#
+# Class wrapping a block allocated out of a Heap -- can be inherited by child process
+#
+
+class BufferWrapper(object):
+
+    _heap = Heap()
+
+    def __init__(self, size):
+        if size < 0:
+            raise ValueError("Size {0:n} out of range".format(size))
+        if sys.maxsize <= size:
+            raise OverflowError("Size {0:n} too large".format(size))
+        block = BufferWrapper._heap.malloc(size)
+        self._state = (block, size)
+        util.Finalize(self, BufferWrapper._heap.free, args=(block,))
+
+    def create_memoryview(self):
+        (arena, start, stop), size = self._state
+        return memoryview(arena.buffer)[start:start+size]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/managers.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/managers.py
new file mode 100644
index 0000000000000000000000000000000000000000..91bcf243e78e5b8b90e377b37f302fd20bb2faa3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/managers.py
@@ -0,0 +1,1438 @@
+#
+# Module providing manager classes for dealing
+# with shared objects
+#
+# multiprocessing/managers.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = [ 'BaseManager', 'SyncManager', 'BaseProxy', 'Token' ]
+
+#
+# Imports
+#
+
+import sys
+import threading
+import signal
+import array
+import collections.abc
+import queue
+import time
+import types
+import os
+from os import getpid
+
+from traceback import format_exc
+
+from . import connection
+from .context import reduction, get_spawning_popen, ProcessError
+from . import pool
+from . import process
+from . import util
+from . import get_context
+try:
+    from . import shared_memory
+except ImportError:
+    HAS_SHMEM = False
+else:
+    HAS_SHMEM = True
+    __all__.append('SharedMemoryManager')
+
+#
+# Register some things for pickling
+#
+
+def reduce_array(a):
+    return array.array, (a.typecode, a.tobytes())
+reduction.register(array.array, reduce_array)
+
+view_types = [type(getattr({}, name)()) for name in ('items','keys','values')]
+def rebuild_as_list(obj):
+    return list, (list(obj),)
+for view_type in view_types:
+    reduction.register(view_type, rebuild_as_list)
+del view_type, view_types
+
+#
+# Type for identifying shared objects
+#
+
+class Token(object):
+    '''
+    Type to uniquely identify a shared object
+    '''
+    __slots__ = ('typeid', 'address', 'id')
+
+    def __init__(self, typeid, address, id):
+        (self.typeid, self.address, self.id) = (typeid, address, id)
+
+    def __getstate__(self):
+        return (self.typeid, self.address, self.id)
+
+    def __setstate__(self, state):
+        (self.typeid, self.address, self.id) = state
+
+    def __repr__(self):
+        return '%s(typeid=%r, address=%r, id=%r)' % \
+               (self.__class__.__name__, self.typeid, self.address, self.id)
+
+#
+# Function for communication with a manager's server process
+#
+
+def dispatch(c, id, methodname, args=(), kwds={}):
+    '''
+    Send a message to manager using connection `c` and return response
+    '''
+    c.send((id, methodname, args, kwds))
+    kind, result = c.recv()
+    if kind == '#RETURN':
+        return result
+    try:
+        raise convert_to_error(kind, result)
+    finally:
+        del result  # break reference cycle
+
+def convert_to_error(kind, result):
+    if kind == '#ERROR':
+        return result
+    elif kind in ('#TRACEBACK', '#UNSERIALIZABLE'):
+        if not isinstance(result, str):
+            raise TypeError(
+                "Result {0!r} (kind '{1}') type is {2}, not str".format(
+                    result, kind, type(result)))
+        if kind == '#UNSERIALIZABLE':
+            return RemoteError('Unserializable message: %s\n' % result)
+        else:
+            return RemoteError(result)
+    else:
+        return ValueError('Unrecognized message type {!r}'.format(kind))
+
+class RemoteError(Exception):
+    def __str__(self):
+        return ('\n' + '-'*75 + '\n' + str(self.args[0]) + '-'*75)
+
+#
+# Functions for finding the method names of an object
+#
+
+def all_methods(obj):
+    '''
+    Return a list of names of methods of `obj`
+    '''
+    temp = []
+    for name in dir(obj):
+        func = getattr(obj, name)
+        if callable(func):
+            temp.append(name)
+    return temp
+
+def public_methods(obj):
+    '''
+    Return a list of names of methods of `obj` which do not start with '_'
+    '''
+    return [name for name in all_methods(obj) if name[0] != '_']
+
+#
+# Server which is run in a process controlled by a manager
+#
+
+class Server(object):
+    '''
+    Server class which runs in a process controlled by a manager object
+    '''
+    public = ['shutdown', 'create', 'accept_connection', 'get_methods',
+              'debug_info', 'number_of_objects', 'dummy', 'incref', 'decref']
+
+    def __init__(self, registry, address, authkey, serializer):
+        if not isinstance(authkey, bytes):
+            raise TypeError(
+                "Authkey {0!r} is type {1!s}, not bytes".format(
+                    authkey, type(authkey)))
+        self.registry = registry
+        self.authkey = process.AuthenticationString(authkey)
+        Listener, Client = listener_client[serializer]
+
+        # do authentication later
+        self.listener = Listener(address=address, backlog=128)
+        self.address = self.listener.address
+
+        self.id_to_obj = {'0': (None, ())}
+        self.id_to_refcount = {}
+        self.id_to_local_proxy_obj = {}
+        self.mutex = threading.Lock()
+
+    def serve_forever(self):
+        '''
+        Run the server forever
+        '''
+        self.stop_event = threading.Event()
+        process.current_process()._manager_server = self
+        try:
+            accepter = threading.Thread(target=self.accepter)
+            accepter.daemon = True
+            accepter.start()
+            try:
+                while not self.stop_event.is_set():
+                    self.stop_event.wait(1)
+            except (KeyboardInterrupt, SystemExit):
+                pass
+        finally:
+            if sys.stdout != sys.__stdout__: # what about stderr?
+                util.debug('resetting stdout, stderr')
+                sys.stdout = sys.__stdout__
+                sys.stderr = sys.__stderr__
+            sys.exit(0)
+
+    def accepter(self):
+        while True:
+            try:
+                c = self.listener.accept()
+            except OSError:
+                continue
+            t = threading.Thread(target=self.handle_request, args=(c,))
+            t.daemon = True
+            t.start()
+
+    def _handle_request(self, c):
+        request = None
+        try:
+            connection.deliver_challenge(c, self.authkey)
+            connection.answer_challenge(c, self.authkey)
+            request = c.recv()
+            ignore, funcname, args, kwds = request
+            assert funcname in self.public, '%r unrecognized' % funcname
+            func = getattr(self, funcname)
+        except Exception:
+            msg = ('#TRACEBACK', format_exc())
+        else:
+            try:
+                result = func(c, *args, **kwds)
+            except Exception:
+                msg = ('#TRACEBACK', format_exc())
+            else:
+                msg = ('#RETURN', result)
+
+        try:
+            c.send(msg)
+        except Exception as e:
+            try:
+                c.send(('#TRACEBACK', format_exc()))
+            except Exception:
+                pass
+            util.info('Failure to send message: %r', msg)
+            util.info(' ... request was %r', request)
+            util.info(' ... exception was %r', e)
+
+    def handle_request(self, conn):
+        '''
+        Handle a new connection
+        '''
+        try:
+            self._handle_request(conn)
+        except SystemExit:
+            # Server.serve_client() calls sys.exit(0) on EOF
+            pass
+        finally:
+            conn.close()
+
+    def serve_client(self, conn):
+        '''
+        Handle requests from the proxies in a particular process/thread
+        '''
+        util.debug('starting server thread to service %r',
+                   threading.current_thread().name)
+
+        recv = conn.recv
+        send = conn.send
+        id_to_obj = self.id_to_obj
+
+        while not self.stop_event.is_set():
+
+            try:
+                methodname = obj = None
+                request = recv()
+                ident, methodname, args, kwds = request
+                try:
+                    obj, exposed, gettypeid = id_to_obj[ident]
+                except KeyError as ke:
+                    try:
+                        obj, exposed, gettypeid = \
+                            self.id_to_local_proxy_obj[ident]
+                    except KeyError:
+                        raise ke
+
+                if methodname not in exposed:
+                    raise AttributeError(
+                        'method %r of %r object is not in exposed=%r' %
+                        (methodname, type(obj), exposed)
+                        )
+
+                function = getattr(obj, methodname)
+
+                try:
+                    res = function(*args, **kwds)
+                except Exception as e:
+                    msg = ('#ERROR', e)
+                else:
+                    typeid = gettypeid and gettypeid.get(methodname, None)
+                    if typeid:
+                        rident, rexposed = self.create(conn, typeid, res)
+                        token = Token(typeid, self.address, rident)
+                        msg = ('#PROXY', (rexposed, token))
+                    else:
+                        msg = ('#RETURN', res)
+
+            except AttributeError:
+                if methodname is None:
+                    msg = ('#TRACEBACK', format_exc())
+                else:
+                    try:
+                        fallback_func = self.fallback_mapping[methodname]
+                        result = fallback_func(
+                            self, conn, ident, obj, *args, **kwds
+                            )
+                        msg = ('#RETURN', result)
+                    except Exception:
+                        msg = ('#TRACEBACK', format_exc())
+
+            except EOFError:
+                util.debug('got EOF -- exiting thread serving %r',
+                           threading.current_thread().name)
+                sys.exit(0)
+
+            except Exception:
+                msg = ('#TRACEBACK', format_exc())
+
+            try:
+                try:
+                    send(msg)
+                except Exception:
+                    send(('#UNSERIALIZABLE', format_exc()))
+            except Exception as e:
+                util.info('exception in thread serving %r',
+                        threading.current_thread().name)
+                util.info(' ... message was %r', msg)
+                util.info(' ... exception was %r', e)
+                conn.close()
+                sys.exit(1)
+
+    def fallback_getvalue(self, conn, ident, obj):
+        return obj
+
+    def fallback_str(self, conn, ident, obj):
+        return str(obj)
+
+    def fallback_repr(self, conn, ident, obj):
+        return repr(obj)
+
+    fallback_mapping = {
+        '__str__':fallback_str,
+        '__repr__':fallback_repr,
+        '#GETVALUE':fallback_getvalue
+        }
+
+    def dummy(self, c):
+        pass
+
+    def debug_info(self, c):
+        '''
+        Return some info --- useful to spot problems with refcounting
+        '''
+        # Perhaps include debug info about 'c'?
+        with self.mutex:
+            result = []
+            keys = list(self.id_to_refcount.keys())
+            keys.sort()
+            for ident in keys:
+                if ident != '0':
+                    result.append('  %s:       refcount=%s\n    %s' %
+                                  (ident, self.id_to_refcount[ident],
+                                   str(self.id_to_obj[ident][0])[:75]))
+            return '\n'.join(result)
+
+    def number_of_objects(self, c):
+        '''
+        Number of shared objects
+        '''
+        # Doesn't use (len(self.id_to_obj) - 1) as we shouldn't count ident='0'
+        return len(self.id_to_refcount)
+
+    def shutdown(self, c):
+        '''
+        Shutdown this process
+        '''
+        try:
+            util.debug('manager received shutdown message')
+            c.send(('#RETURN', None))
+        except:
+            import traceback
+            traceback.print_exc()
+        finally:
+            self.stop_event.set()
+
+    def create(self, c, typeid, /, *args, **kwds):
+        '''
+        Create a new shared object and return its id
+        '''
+        with self.mutex:
+            callable, exposed, method_to_typeid, proxytype = \
+                      self.registry[typeid]
+
+            if callable is None:
+                if kwds or (len(args) != 1):
+                    raise ValueError(
+                        "Without callable, must have one non-keyword argument")
+                obj = args[0]
+            else:
+                obj = callable(*args, **kwds)
+
+            if exposed is None:
+                exposed = public_methods(obj)
+            if method_to_typeid is not None:
+                if not isinstance(method_to_typeid, dict):
+                    raise TypeError(
+                        "Method_to_typeid {0!r}: type {1!s}, not dict".format(
+                            method_to_typeid, type(method_to_typeid)))
+                exposed = list(exposed) + list(method_to_typeid)
+
+            ident = '%x' % id(obj)  # convert to string because xmlrpclib
+                                    # only has 32 bit signed integers
+            util.debug('%r callable returned object with id %r', typeid, ident)
+
+            self.id_to_obj[ident] = (obj, set(exposed), method_to_typeid)
+            if ident not in self.id_to_refcount:
+                self.id_to_refcount[ident] = 0
+
+        self.incref(c, ident)
+        return ident, tuple(exposed)
+
+    def get_methods(self, c, token):
+        '''
+        Return the methods of the shared object indicated by token
+        '''
+        return tuple(self.id_to_obj[token.id][1])
+
+    def accept_connection(self, c, name):
+        '''
+        Spawn a new thread to serve this connection
+        '''
+        threading.current_thread().name = name
+        c.send(('#RETURN', None))
+        self.serve_client(c)
+
+    def incref(self, c, ident):
+        with self.mutex:
+            try:
+                self.id_to_refcount[ident] += 1
+            except KeyError as ke:
+                # If no external references exist but an internal (to the
+                # manager) still does and a new external reference is created
+                # from it, restore the manager's tracking of it from the
+                # previously stashed internal ref.
+                if ident in self.id_to_local_proxy_obj:
+                    self.id_to_refcount[ident] = 1
+                    self.id_to_obj[ident] = \
+                        self.id_to_local_proxy_obj[ident]
+                    util.debug('Server re-enabled tracking & INCREF %r', ident)
+                else:
+                    raise ke
+
+    def decref(self, c, ident):
+        if ident not in self.id_to_refcount and \
+            ident in self.id_to_local_proxy_obj:
+            util.debug('Server DECREF skipping %r', ident)
+            return
+
+        with self.mutex:
+            if self.id_to_refcount[ident] <= 0:
+                raise AssertionError(
+                    "Id {0!s} ({1!r}) has refcount {2:n}, not 1+".format(
+                        ident, self.id_to_obj[ident],
+                        self.id_to_refcount[ident]))
+            self.id_to_refcount[ident] -= 1
+            if self.id_to_refcount[ident] == 0:
+                del self.id_to_refcount[ident]
+
+        if ident not in self.id_to_refcount:
+            # Two-step process in case the object turns out to contain other
+            # proxy objects (e.g. a managed list of managed lists).
+            # Otherwise, deleting self.id_to_obj[ident] would trigger the
+            # deleting of the stored value (another managed object) which would
+            # in turn attempt to acquire the mutex that is already held here.
+            self.id_to_obj[ident] = (None, (), None)  # thread-safe
+            util.debug('disposing of obj with id %r', ident)
+            with self.mutex:
+                del self.id_to_obj[ident]
+
+
+#
+# Class to represent state of a manager
+#
+
+class State(object):
+    __slots__ = ['value']
+    INITIAL = 0
+    STARTED = 1
+    SHUTDOWN = 2
+
+#
+# Mapping from serializer name to Listener and Client types
+#
+
+listener_client = {
+    'pickle' : (connection.Listener, connection.Client),
+    'xmlrpclib' : (connection.XmlListener, connection.XmlClient)
+    }
+
+#
+# Definition of BaseManager
+#
+
+class BaseManager(object):
+    '''
+    Base class for managers
+    '''
+    _registry = {}
+    _Server = Server
+
+    def __init__(self, address=None, authkey=None, serializer='pickle',
+                 ctx=None, *, shutdown_timeout=1.0):
+        if authkey is None:
+            authkey = process.current_process().authkey
+        self._address = address     # XXX not final address if eg ('', 0)
+        self._authkey = process.AuthenticationString(authkey)
+        self._state = State()
+        self._state.value = State.INITIAL
+        self._serializer = serializer
+        self._Listener, self._Client = listener_client[serializer]
+        self._ctx = ctx or get_context()
+        self._shutdown_timeout = shutdown_timeout
+
+    def get_server(self):
+        '''
+        Return server object with serve_forever() method and address attribute
+        '''
+        if self._state.value != State.INITIAL:
+            if self._state.value == State.STARTED:
+                raise ProcessError("Already started server")
+            elif self._state.value == State.SHUTDOWN:
+                raise ProcessError("Manager has shut down")
+            else:
+                raise ProcessError(
+                    "Unknown state {!r}".format(self._state.value))
+        return Server(self._registry, self._address,
+                      self._authkey, self._serializer)
+
+    def connect(self):
+        '''
+        Connect manager object to the server process
+        '''
+        Listener, Client = listener_client[self._serializer]
+        conn = Client(self._address, authkey=self._authkey)
+        dispatch(conn, None, 'dummy')
+        self._state.value = State.STARTED
+
+    def start(self, initializer=None, initargs=()):
+        '''
+        Spawn a server process for this manager object
+        '''
+        if self._state.value != State.INITIAL:
+            if self._state.value == State.STARTED:
+                raise ProcessError("Already started server")
+            elif self._state.value == State.SHUTDOWN:
+                raise ProcessError("Manager has shut down")
+            else:
+                raise ProcessError(
+                    "Unknown state {!r}".format(self._state.value))
+
+        if initializer is not None and not callable(initializer):
+            raise TypeError('initializer must be a callable')
+
+        # pipe over which we will retrieve address of server
+        reader, writer = connection.Pipe(duplex=False)
+
+        # spawn process which runs a server
+        self._process = self._ctx.Process(
+            target=type(self)._run_server,
+            args=(self._registry, self._address, self._authkey,
+                  self._serializer, writer, initializer, initargs),
+            )
+        ident = ':'.join(str(i) for i in self._process._identity)
+        self._process.name = type(self).__name__  + '-' + ident
+        self._process.start()
+
+        # get address of server
+        writer.close()
+        self._address = reader.recv()
+        reader.close()
+
+        # register a finalizer
+        self._state.value = State.STARTED
+        self.shutdown = util.Finalize(
+            self, type(self)._finalize_manager,
+            args=(self._process, self._address, self._authkey, self._state,
+                  self._Client, self._shutdown_timeout),
+            exitpriority=0
+            )
+
+    @classmethod
+    def _run_server(cls, registry, address, authkey, serializer, writer,
+                    initializer=None, initargs=()):
+        '''
+        Create a server, report its address and run it
+        '''
+        # bpo-36368: protect server process from KeyboardInterrupt signals
+        signal.signal(signal.SIGINT, signal.SIG_IGN)
+
+        if initializer is not None:
+            initializer(*initargs)
+
+        # create server
+        server = cls._Server(registry, address, authkey, serializer)
+
+        # inform parent process of the server's address
+        writer.send(server.address)
+        writer.close()
+
+        # run the manager
+        util.info('manager serving at %r', server.address)
+        server.serve_forever()
+
+    def _create(self, typeid, /, *args, **kwds):
+        '''
+        Create a new shared object; return the token and exposed tuple
+        '''
+        assert self._state.value == State.STARTED, 'server not yet started'
+        conn = self._Client(self._address, authkey=self._authkey)
+        try:
+            id, exposed = dispatch(conn, None, 'create', (typeid,)+args, kwds)
+        finally:
+            conn.close()
+        return Token(typeid, self._address, id), exposed
+
+    def join(self, timeout=None):
+        '''
+        Join the manager process (if it has been spawned)
+        '''
+        if self._process is not None:
+            self._process.join(timeout)
+            if not self._process.is_alive():
+                self._process = None
+
+    def _debug_info(self):
+        '''
+        Return some info about the servers shared objects and connections
+        '''
+        conn = self._Client(self._address, authkey=self._authkey)
+        try:
+            return dispatch(conn, None, 'debug_info')
+        finally:
+            conn.close()
+
+    def _number_of_objects(self):
+        '''
+        Return the number of shared objects
+        '''
+        conn = self._Client(self._address, authkey=self._authkey)
+        try:
+            return dispatch(conn, None, 'number_of_objects')
+        finally:
+            conn.close()
+
+    def __enter__(self):
+        if self._state.value == State.INITIAL:
+            self.start()
+        if self._state.value != State.STARTED:
+            if self._state.value == State.INITIAL:
+                raise ProcessError("Unable to start server")
+            elif self._state.value == State.SHUTDOWN:
+                raise ProcessError("Manager has shut down")
+            else:
+                raise ProcessError(
+                    "Unknown state {!r}".format(self._state.value))
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        self.shutdown()
+
+    @staticmethod
+    def _finalize_manager(process, address, authkey, state, _Client,
+                          shutdown_timeout):
+        '''
+        Shutdown the manager process; will be registered as a finalizer
+        '''
+        if process.is_alive():
+            util.info('sending shutdown message to manager')
+            try:
+                conn = _Client(address, authkey=authkey)
+                try:
+                    dispatch(conn, None, 'shutdown')
+                finally:
+                    conn.close()
+            except Exception:
+                pass
+
+            process.join(timeout=shutdown_timeout)
+            if process.is_alive():
+                util.info('manager still alive')
+                if hasattr(process, 'terminate'):
+                    util.info('trying to `terminate()` manager process')
+                    process.terminate()
+                    process.join(timeout=shutdown_timeout)
+                    if process.is_alive():
+                        util.info('manager still alive after terminate')
+                        process.kill()
+                        process.join()
+
+        state.value = State.SHUTDOWN
+        try:
+            del BaseProxy._address_to_local[address]
+        except KeyError:
+            pass
+
+    @property
+    def address(self):
+        return self._address
+
+    @classmethod
+    def register(cls, typeid, callable=None, proxytype=None, exposed=None,
+                 method_to_typeid=None, create_method=True):
+        '''
+        Register a typeid with the manager type
+        '''
+        if '_registry' not in cls.__dict__:
+            cls._registry = cls._registry.copy()
+
+        if proxytype is None:
+            proxytype = AutoProxy
+
+        exposed = exposed or getattr(proxytype, '_exposed_', None)
+
+        method_to_typeid = method_to_typeid or \
+                           getattr(proxytype, '_method_to_typeid_', None)
+
+        if method_to_typeid:
+            for key, value in list(method_to_typeid.items()): # isinstance?
+                assert type(key) is str, '%r is not a string' % key
+                assert type(value) is str, '%r is not a string' % value
+
+        cls._registry[typeid] = (
+            callable, exposed, method_to_typeid, proxytype
+            )
+
+        if create_method:
+            def temp(self, /, *args, **kwds):
+                util.debug('requesting creation of a shared %r object', typeid)
+                token, exp = self._create(typeid, *args, **kwds)
+                proxy = proxytype(
+                    token, self._serializer, manager=self,
+                    authkey=self._authkey, exposed=exp
+                    )
+                conn = self._Client(token.address, authkey=self._authkey)
+                dispatch(conn, None, 'decref', (token.id,))
+                return proxy
+            temp.__name__ = typeid
+            setattr(cls, typeid, temp)
+
+#
+# Subclass of set which get cleared after a fork
+#
+
+class ProcessLocalSet(set):
+    def __init__(self):
+        util.register_after_fork(self, lambda obj: obj.clear())
+    def __reduce__(self):
+        return type(self), ()
+
+#
+# Definition of BaseProxy
+#
+
+class BaseProxy(object):
+    '''
+    A base for proxies of shared objects
+    '''
+    _address_to_local = {}
+    _mutex = util.ForkAwareThreadLock()
+
+    # Each instance gets a `_serial` number. Unlike `id(...)`, this number
+    # is never reused.
+    _next_serial = 1
+
+    def __init__(self, token, serializer, manager=None,
+                 authkey=None, exposed=None, incref=True, manager_owned=False):
+        with BaseProxy._mutex:
+            tls_serials = BaseProxy._address_to_local.get(token.address, None)
+            if tls_serials is None:
+                tls_serials = util.ForkAwareLocal(), ProcessLocalSet()
+                BaseProxy._address_to_local[token.address] = tls_serials
+
+            self._serial = BaseProxy._next_serial
+            BaseProxy._next_serial += 1
+
+        # self._tls is used to record the connection used by this
+        # thread to communicate with the manager at token.address
+        self._tls = tls_serials[0]
+
+        # self._all_serials is a set used to record the identities of all
+        # shared objects for which the current process owns references and
+        # which are in the manager at token.address
+        self._all_serials = tls_serials[1]
+
+        self._token = token
+        self._id = self._token.id
+        self._manager = manager
+        self._serializer = serializer
+        self._Client = listener_client[serializer][1]
+
+        # Should be set to True only when a proxy object is being created
+        # on the manager server; primary use case: nested proxy objects.
+        # RebuildProxy detects when a proxy is being created on the manager
+        # and sets this value appropriately.
+        self._owned_by_manager = manager_owned
+
+        if authkey is not None:
+            self._authkey = process.AuthenticationString(authkey)
+        elif self._manager is not None:
+            self._authkey = self._manager._authkey
+        else:
+            self._authkey = process.current_process().authkey
+
+        if incref:
+            self._incref()
+
+        util.register_after_fork(self, BaseProxy._after_fork)
+
+    def _connect(self):
+        util.debug('making connection to manager')
+        name = process.current_process().name
+        if threading.current_thread().name != 'MainThread':
+            name += '|' + threading.current_thread().name
+        conn = self._Client(self._token.address, authkey=self._authkey)
+        dispatch(conn, None, 'accept_connection', (name,))
+        self._tls.connection = conn
+
+    def _callmethod(self, methodname, args=(), kwds={}):
+        '''
+        Try to call a method of the referent and return a copy of the result
+        '''
+        try:
+            conn = self._tls.connection
+        except AttributeError:
+            util.debug('thread %r does not own a connection',
+                       threading.current_thread().name)
+            self._connect()
+            conn = self._tls.connection
+
+        conn.send((self._id, methodname, args, kwds))
+        kind, result = conn.recv()
+
+        if kind == '#RETURN':
+            return result
+        elif kind == '#PROXY':
+            exposed, token = result
+            proxytype = self._manager._registry[token.typeid][-1]
+            token.address = self._token.address
+            proxy = proxytype(
+                token, self._serializer, manager=self._manager,
+                authkey=self._authkey, exposed=exposed
+                )
+            conn = self._Client(token.address, authkey=self._authkey)
+            dispatch(conn, None, 'decref', (token.id,))
+            return proxy
+        try:
+            raise convert_to_error(kind, result)
+        finally:
+            del result   # break reference cycle
+
+    def _getvalue(self):
+        '''
+        Get a copy of the value of the referent
+        '''
+        return self._callmethod('#GETVALUE')
+
+    def _incref(self):
+        if self._owned_by_manager:
+            util.debug('owned_by_manager skipped INCREF of %r', self._token.id)
+            return
+
+        conn = self._Client(self._token.address, authkey=self._authkey)
+        dispatch(conn, None, 'incref', (self._id,))
+        util.debug('INCREF %r', self._token.id)
+
+        self._all_serials.add(self._serial)
+
+        state = self._manager and self._manager._state
+
+        self._close = util.Finalize(
+            self, BaseProxy._decref,
+            args=(self._token, self._serial, self._authkey, state,
+                  self._tls, self._all_serials, self._Client),
+            exitpriority=10
+            )
+
+    @staticmethod
+    def _decref(token, serial, authkey, state, tls, idset, _Client):
+        idset.discard(serial)
+
+        # check whether manager is still alive
+        if state is None or state.value == State.STARTED:
+            # tell manager this process no longer cares about referent
+            try:
+                util.debug('DECREF %r', token.id)
+                conn = _Client(token.address, authkey=authkey)
+                dispatch(conn, None, 'decref', (token.id,))
+            except Exception as e:
+                util.debug('... decref failed %s', e)
+
+        else:
+            util.debug('DECREF %r -- manager already shutdown', token.id)
+
+        # check whether we can close this thread's connection because
+        # the process owns no more references to objects for this manager
+        if not idset and hasattr(tls, 'connection'):
+            util.debug('thread %r has no more proxies so closing conn',
+                       threading.current_thread().name)
+            tls.connection.close()
+            del tls.connection
+
+    def _after_fork(self):
+        self._manager = None
+        try:
+            self._incref()
+        except Exception as e:
+            # the proxy may just be for a manager which has shutdown
+            util.info('incref failed: %s' % e)
+
+    def __reduce__(self):
+        kwds = {}
+        if get_spawning_popen() is not None:
+            kwds['authkey'] = self._authkey
+
+        if getattr(self, '_isauto', False):
+            kwds['exposed'] = self._exposed_
+            return (RebuildProxy,
+                    (AutoProxy, self._token, self._serializer, kwds))
+        else:
+            return (RebuildProxy,
+                    (type(self), self._token, self._serializer, kwds))
+
+    def __deepcopy__(self, memo):
+        return self._getvalue()
+
+    def __repr__(self):
+        return '<%s object, typeid %r at %#x>' % \
+               (type(self).__name__, self._token.typeid, id(self))
+
+    def __str__(self):
+        '''
+        Return representation of the referent (or a fall-back if that fails)
+        '''
+        try:
+            return self._callmethod('__repr__')
+        except Exception:
+            return repr(self)[:-1] + "; '__str__()' failed>"
+
+#
+# Function used for unpickling
+#
+
+def RebuildProxy(func, token, serializer, kwds):
+    '''
+    Function used for unpickling proxy objects.
+    '''
+    server = getattr(process.current_process(), '_manager_server', None)
+    if server and server.address == token.address:
+        util.debug('Rebuild a proxy owned by manager, token=%r', token)
+        kwds['manager_owned'] = True
+        if token.id not in server.id_to_local_proxy_obj:
+            server.id_to_local_proxy_obj[token.id] = \
+                server.id_to_obj[token.id]
+    incref = (
+        kwds.pop('incref', True) and
+        not getattr(process.current_process(), '_inheriting', False)
+        )
+    return func(token, serializer, incref=incref, **kwds)
+
+#
+# Functions to create proxies and proxy types
+#
+
+def MakeProxyType(name, exposed, _cache={}):
+    '''
+    Return a proxy type whose methods are given by `exposed`
+    '''
+    exposed = tuple(exposed)
+    try:
+        return _cache[(name, exposed)]
+    except KeyError:
+        pass
+
+    dic = {}
+
+    for meth in exposed:
+        exec('''def %s(self, /, *args, **kwds):
+        return self._callmethod(%r, args, kwds)''' % (meth, meth), dic)
+
+    ProxyType = type(name, (BaseProxy,), dic)
+    ProxyType._exposed_ = exposed
+    _cache[(name, exposed)] = ProxyType
+    return ProxyType
+
+
+def AutoProxy(token, serializer, manager=None, authkey=None,
+              exposed=None, incref=True, manager_owned=False):
+    '''
+    Return an auto-proxy for `token`
+    '''
+    _Client = listener_client[serializer][1]
+
+    if exposed is None:
+        conn = _Client(token.address, authkey=authkey)
+        try:
+            exposed = dispatch(conn, None, 'get_methods', (token,))
+        finally:
+            conn.close()
+
+    if authkey is None and manager is not None:
+        authkey = manager._authkey
+    if authkey is None:
+        authkey = process.current_process().authkey
+
+    ProxyType = MakeProxyType('AutoProxy[%s]' % token.typeid, exposed)
+    proxy = ProxyType(token, serializer, manager=manager, authkey=authkey,
+                      incref=incref, manager_owned=manager_owned)
+    proxy._isauto = True
+    return proxy
+
+#
+# Types/callables which we will register with SyncManager
+#
+
+class Namespace(object):
+    def __init__(self, /, **kwds):
+        self.__dict__.update(kwds)
+    def __repr__(self):
+        items = list(self.__dict__.items())
+        temp = []
+        for name, value in items:
+            if not name.startswith('_'):
+                temp.append('%s=%r' % (name, value))
+        temp.sort()
+        return '%s(%s)' % (self.__class__.__name__, ', '.join(temp))
+
+class Value(object):
+    def __init__(self, typecode, value, lock=True):
+        self._typecode = typecode
+        self._value = value
+    def get(self):
+        return self._value
+    def set(self, value):
+        self._value = value
+    def __repr__(self):
+        return '%s(%r, %r)'%(type(self).__name__, self._typecode, self._value)
+    value = property(get, set)
+
+def Array(typecode, sequence, lock=True):
+    return array.array(typecode, sequence)
+
+#
+# Proxy types used by SyncManager
+#
+
+class IteratorProxy(BaseProxy):
+    _exposed_ = ('__next__', 'send', 'throw', 'close')
+    def __iter__(self):
+        return self
+    def __next__(self, *args):
+        return self._callmethod('__next__', args)
+    def send(self, *args):
+        return self._callmethod('send', args)
+    def throw(self, *args):
+        return self._callmethod('throw', args)
+    def close(self, *args):
+        return self._callmethod('close', args)
+
+
+class AcquirerProxy(BaseProxy):
+    _exposed_ = ('acquire', 'release', 'locked')
+    def acquire(self, blocking=True, timeout=None):
+        args = (blocking,) if timeout is None else (blocking, timeout)
+        return self._callmethod('acquire', args)
+    def release(self):
+        return self._callmethod('release')
+    def locked(self):
+        return self._callmethod('locked')
+    def __enter__(self):
+        return self._callmethod('acquire')
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        return self._callmethod('release')
+
+
+class ConditionProxy(AcquirerProxy):
+    _exposed_ = ('acquire', 'release', 'locked', 'wait', 'notify', 'notify_all')
+    def wait(self, timeout=None):
+        return self._callmethod('wait', (timeout,))
+    def notify(self, n=1):
+        return self._callmethod('notify', (n,))
+    def notify_all(self):
+        return self._callmethod('notify_all')
+    def wait_for(self, predicate, timeout=None):
+        result = predicate()
+        if result:
+            return result
+        if timeout is not None:
+            endtime = time.monotonic() + timeout
+        else:
+            endtime = None
+            waittime = None
+        while not result:
+            if endtime is not None:
+                waittime = endtime - time.monotonic()
+                if waittime <= 0:
+                    break
+            self.wait(waittime)
+            result = predicate()
+        return result
+
+
+class EventProxy(BaseProxy):
+    _exposed_ = ('is_set', 'set', 'clear', 'wait')
+    def is_set(self):
+        return self._callmethod('is_set')
+    def set(self):
+        return self._callmethod('set')
+    def clear(self):
+        return self._callmethod('clear')
+    def wait(self, timeout=None):
+        return self._callmethod('wait', (timeout,))
+
+
+class BarrierProxy(BaseProxy):
+    _exposed_ = ('__getattribute__', 'wait', 'abort', 'reset')
+    def wait(self, timeout=None):
+        return self._callmethod('wait', (timeout,))
+    def abort(self):
+        return self._callmethod('abort')
+    def reset(self):
+        return self._callmethod('reset')
+    @property
+    def parties(self):
+        return self._callmethod('__getattribute__', ('parties',))
+    @property
+    def n_waiting(self):
+        return self._callmethod('__getattribute__', ('n_waiting',))
+    @property
+    def broken(self):
+        return self._callmethod('__getattribute__', ('broken',))
+
+
+class NamespaceProxy(BaseProxy):
+    _exposed_ = ('__getattribute__', '__setattr__', '__delattr__')
+    def __getattr__(self, key):
+        if key[0] == '_':
+            return object.__getattribute__(self, key)
+        callmethod = object.__getattribute__(self, '_callmethod')
+        return callmethod('__getattribute__', (key,))
+    def __setattr__(self, key, value):
+        if key[0] == '_':
+            return object.__setattr__(self, key, value)
+        callmethod = object.__getattribute__(self, '_callmethod')
+        return callmethod('__setattr__', (key, value))
+    def __delattr__(self, key):
+        if key[0] == '_':
+            return object.__delattr__(self, key)
+        callmethod = object.__getattribute__(self, '_callmethod')
+        return callmethod('__delattr__', (key,))
+
+
+class ValueProxy(BaseProxy):
+    _exposed_ = ('get', 'set')
+    def get(self):
+        return self._callmethod('get')
+    def set(self, value):
+        return self._callmethod('set', (value,))
+    value = property(get, set)
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+BaseListProxy = MakeProxyType('BaseListProxy', (
+    '__add__', '__contains__', '__delitem__', '__getitem__', '__imul__',
+    '__len__', '__mul__', '__reversed__', '__rmul__', '__setitem__',
+    'append', 'clear', 'copy', 'count', 'extend', 'index', 'insert', 'pop',
+    'remove', 'reverse', 'sort',
+    ))
+class ListProxy(BaseListProxy):
+    def __iadd__(self, value):
+        self._callmethod('extend', (value,))
+        return self
+    def __imul__(self, value):
+        self._callmethod('__imul__', (value,))
+        return self
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+collections.abc.MutableSequence.register(BaseListProxy)
+
+_BaseDictProxy = MakeProxyType('_BaseDictProxy', (
+    '__contains__', '__delitem__', '__getitem__', '__ior__', '__iter__',
+    '__len__', '__or__', '__reversed__', '__ror__',
+    '__setitem__', 'clear', 'copy', 'fromkeys', 'get', 'items',
+    'keys', 'pop', 'popitem', 'setdefault', 'update', 'values'
+    ))
+_BaseDictProxy._method_to_typeid_ = {
+    '__iter__': 'Iterator',
+    }
+class DictProxy(_BaseDictProxy):
+    def __ior__(self, value):
+        self._callmethod('__ior__', (value,))
+        return self
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+collections.abc.MutableMapping.register(_BaseDictProxy)
+
+_BaseSetProxy = MakeProxyType("_BaseSetProxy", (
+    '__and__', '__class_getitem__', '__contains__', '__iand__', '__ior__',
+    '__isub__', '__iter__', '__ixor__', '__len__', '__or__', '__rand__',
+    '__ror__', '__rsub__', '__rxor__', '__sub__', '__xor__',
+    '__ge__', '__gt__', '__le__', '__lt__',
+    'add', 'clear', 'copy', 'difference', 'difference_update', 'discard',
+    'intersection', 'intersection_update', 'isdisjoint', 'issubset',
+    'issuperset', 'pop', 'remove', 'symmetric_difference',
+    'symmetric_difference_update', 'union', 'update',
+))
+
+class SetProxy(_BaseSetProxy):
+    def __ior__(self, value):
+        self._callmethod('__ior__', (value,))
+        return self
+    def __iand__(self, value):
+        self._callmethod('__iand__', (value,))
+        return self
+    def __ixor__(self, value):
+        self._callmethod('__ixor__', (value,))
+        return self
+    def __isub__(self, value):
+        self._callmethod('__isub__', (value,))
+        return self
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+collections.abc.MutableMapping.register(_BaseSetProxy)
+
+
+ArrayProxy = MakeProxyType('ArrayProxy', (
+    '__len__', '__getitem__', '__setitem__'
+    ))
+
+
+BasePoolProxy = MakeProxyType('PoolProxy', (
+    'apply', 'apply_async', 'close', 'imap', 'imap_unordered', 'join',
+    'map', 'map_async', 'starmap', 'starmap_async', 'terminate',
+    ))
+BasePoolProxy._method_to_typeid_ = {
+    'apply_async': 'AsyncResult',
+    'map_async': 'AsyncResult',
+    'starmap_async': 'AsyncResult',
+    'imap': 'Iterator',
+    'imap_unordered': 'Iterator'
+    }
+class PoolProxy(BasePoolProxy):
+    def __enter__(self):
+        return self
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        self.terminate()
+
+#
+# Definition of SyncManager
+#
+
+class SyncManager(BaseManager):
+    '''
+    Subclass of `BaseManager` which supports a number of shared object types.
+
+    The types registered are those intended for the synchronization
+    of threads, plus `dict`, `list` and `Namespace`.
+
+    The `multiprocessing.Manager()` function creates started instances of
+    this class.
+    '''
+
+SyncManager.register('Queue', queue.Queue)
+SyncManager.register('JoinableQueue', queue.Queue)
+SyncManager.register('Event', threading.Event, EventProxy)
+SyncManager.register('Lock', threading.Lock, AcquirerProxy)
+SyncManager.register('RLock', threading.RLock, AcquirerProxy)
+SyncManager.register('Semaphore', threading.Semaphore, AcquirerProxy)
+SyncManager.register('BoundedSemaphore', threading.BoundedSemaphore,
+                     AcquirerProxy)
+SyncManager.register('Condition', threading.Condition, ConditionProxy)
+SyncManager.register('Barrier', threading.Barrier, BarrierProxy)
+SyncManager.register('Pool', pool.Pool, PoolProxy)
+SyncManager.register('list', list, ListProxy)
+SyncManager.register('dict', dict, DictProxy)
+SyncManager.register('set', set, SetProxy)
+SyncManager.register('Value', Value, ValueProxy)
+SyncManager.register('Array', Array, ArrayProxy)
+SyncManager.register('Namespace', Namespace, NamespaceProxy)
+
+# types returned by methods of PoolProxy
+SyncManager.register('Iterator', proxytype=IteratorProxy, create_method=False)
+SyncManager.register('AsyncResult', create_method=False)
+
+#
+# Definition of SharedMemoryManager and SharedMemoryServer
+#
+
+if HAS_SHMEM:
+    class _SharedMemoryTracker:
+        "Manages one or more shared memory segments."
+
+        def __init__(self, name, segment_names=[]):
+            self.shared_memory_context_name = name
+            self.segment_names = segment_names
+
+        def register_segment(self, segment_name):
+            "Adds the supplied shared memory block name to tracker."
+            util.debug(f"Register segment {segment_name!r} in pid {getpid()}")
+            self.segment_names.append(segment_name)
+
+        def destroy_segment(self, segment_name):
+            """Calls unlink() on the shared memory block with the supplied name
+            and removes it from the list of blocks being tracked."""
+            util.debug(f"Destroy segment {segment_name!r} in pid {getpid()}")
+            self.segment_names.remove(segment_name)
+            segment = shared_memory.SharedMemory(segment_name)
+            segment.close()
+            segment.unlink()
+
+        def unlink(self):
+            "Calls destroy_segment() on all tracked shared memory blocks."
+            for segment_name in self.segment_names[:]:
+                self.destroy_segment(segment_name)
+
+        def __del__(self):
+            util.debug(f"Call {self.__class__.__name__}.__del__ in {getpid()}")
+            self.unlink()
+
+        def __getstate__(self):
+            return (self.shared_memory_context_name, self.segment_names)
+
+        def __setstate__(self, state):
+            self.__init__(*state)
+
+
+    class SharedMemoryServer(Server):
+
+        public = Server.public + \
+                 ['track_segment', 'release_segment', 'list_segments']
+
+        def __init__(self, *args, **kwargs):
+            Server.__init__(self, *args, **kwargs)
+            address = self.address
+            # The address of Linux abstract namespaces can be bytes
+            if isinstance(address, bytes):
+                address = os.fsdecode(address)
+            self.shared_memory_context = \
+                _SharedMemoryTracker(f"shm_{address}_{getpid()}")
+            util.debug(f"SharedMemoryServer started by pid {getpid()}")
+
+        def create(self, c, typeid, /, *args, **kwargs):
+            """Create a new distributed-shared object (not backed by a shared
+            memory block) and return its id to be used in a Proxy Object."""
+            # Unless set up as a shared proxy, don't make shared_memory_context
+            # a standard part of kwargs.  This makes things easier for supplying
+            # simple functions.
+            if hasattr(self.registry[typeid][-1], "_shared_memory_proxy"):
+                kwargs['shared_memory_context'] = self.shared_memory_context
+            return Server.create(self, c, typeid, *args, **kwargs)
+
+        def shutdown(self, c):
+            "Call unlink() on all tracked shared memory, terminate the Server."
+            self.shared_memory_context.unlink()
+            return Server.shutdown(self, c)
+
+        def track_segment(self, c, segment_name):
+            "Adds the supplied shared memory block name to Server's tracker."
+            self.shared_memory_context.register_segment(segment_name)
+
+        def release_segment(self, c, segment_name):
+            """Calls unlink() on the shared memory block with the supplied name
+            and removes it from the tracker instance inside the Server."""
+            self.shared_memory_context.destroy_segment(segment_name)
+
+        def list_segments(self, c):
+            """Returns a list of names of shared memory blocks that the Server
+            is currently tracking."""
+            return self.shared_memory_context.segment_names
+
+
+    class SharedMemoryManager(BaseManager):
+        """Like SyncManager but uses SharedMemoryServer instead of Server.
+
+        It provides methods for creating and returning SharedMemory instances
+        and for creating a list-like object (ShareableList) backed by shared
+        memory.  It also provides methods that create and return Proxy Objects
+        that support synchronization across processes (i.e. multi-process-safe
+        locks and semaphores).
+        """
+
+        _Server = SharedMemoryServer
+
+        def __init__(self, *args, **kwargs):
+            if os.name == "posix":
+                # bpo-36867: Ensure the resource_tracker is running before
+                # launching the manager process, so that concurrent
+                # shared_memory manipulation both in the manager and in the
+                # current process does not create two resource_tracker
+                # processes.
+                from . import resource_tracker
+                resource_tracker.ensure_running()
+            BaseManager.__init__(self, *args, **kwargs)
+            util.debug(f"{self.__class__.__name__} created by pid {getpid()}")
+
+        def __del__(self):
+            util.debug(f"{self.__class__.__name__}.__del__ by pid {getpid()}")
+
+        def get_server(self):
+            'Better than monkeypatching for now; merge into Server ultimately'
+            if self._state.value != State.INITIAL:
+                if self._state.value == State.STARTED:
+                    raise ProcessError("Already started SharedMemoryServer")
+                elif self._state.value == State.SHUTDOWN:
+                    raise ProcessError("SharedMemoryManager has shut down")
+                else:
+                    raise ProcessError(
+                        "Unknown state {!r}".format(self._state.value))
+            return self._Server(self._registry, self._address,
+                                self._authkey, self._serializer)
+
+        def SharedMemory(self, size):
+            """Returns a new SharedMemory instance with the specified size in
+            bytes, to be tracked by the manager."""
+            with self._Client(self._address, authkey=self._authkey) as conn:
+                sms = shared_memory.SharedMemory(None, create=True, size=size)
+                try:
+                    dispatch(conn, None, 'track_segment', (sms.name,))
+                except BaseException as e:
+                    sms.unlink()
+                    raise e
+            return sms
+
+        def ShareableList(self, sequence):
+            """Returns a new ShareableList instance populated with the values
+            from the input sequence, to be tracked by the manager."""
+            with self._Client(self._address, authkey=self._authkey) as conn:
+                sl = shared_memory.ShareableList(sequence)
+                try:
+                    dispatch(conn, None, 'track_segment', (sl.shm.name,))
+                except BaseException as e:
+                    sl.shm.unlink()
+                    raise e
+            return sl
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/pool.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/pool.py
new file mode 100644
index 0000000000000000000000000000000000000000..f979890170b1a1f8721f0826169a440ae0859749
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/pool.py
@@ -0,0 +1,957 @@
+#
+# Module providing the `Pool` class for managing a process pool
+#
+# multiprocessing/pool.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = ['Pool', 'ThreadPool']
+
+#
+# Imports
+#
+
+import collections
+import itertools
+import os
+import queue
+import threading
+import time
+import traceback
+import types
+import warnings
+
+# If threading is available then ThreadPool should be provided.  Therefore
+# we avoid top-level imports which are liable to fail on some systems.
+from . import util
+from . import get_context, TimeoutError
+from .connection import wait
+
+#
+# Constants representing the state of a pool
+#
+
+INIT = "INIT"
+RUN = "RUN"
+CLOSE = "CLOSE"
+TERMINATE = "TERMINATE"
+
+#
+# Miscellaneous
+#
+
+job_counter = itertools.count()
+
+def mapstar(args):
+    return list(map(*args))
+
+def starmapstar(args):
+    return list(itertools.starmap(args[0], args[1]))
+
+#
+# Hack to embed stringification of remote traceback in local traceback
+#
+
+class RemoteTraceback(Exception):
+    def __init__(self, tb):
+        self.tb = tb
+    def __str__(self):
+        return self.tb
+
+class ExceptionWithTraceback:
+    def __init__(self, exc, tb):
+        tb = traceback.format_exception(type(exc), exc, tb)
+        tb = ''.join(tb)
+        self.exc = exc
+        self.tb = '\n"""\n%s"""' % tb
+    def __reduce__(self):
+        return rebuild_exc, (self.exc, self.tb)
+
+def rebuild_exc(exc, tb):
+    exc.__cause__ = RemoteTraceback(tb)
+    return exc
+
+#
+# Code run by worker processes
+#
+
+class MaybeEncodingError(Exception):
+    """Wraps possible unpickleable errors, so they can be
+    safely sent through the socket."""
+
+    def __init__(self, exc, value):
+        self.exc = repr(exc)
+        self.value = repr(value)
+        super(MaybeEncodingError, self).__init__(self.exc, self.value)
+
+    def __str__(self):
+        return "Error sending result: '%s'. Reason: '%s'" % (self.value,
+                                                             self.exc)
+
+    def __repr__(self):
+        return "<%s: %s>" % (self.__class__.__name__, self)
+
+
+def worker(inqueue, outqueue, initializer=None, initargs=(), maxtasks=None,
+           wrap_exception=False):
+    if (maxtasks is not None) and not (isinstance(maxtasks, int)
+                                       and maxtasks >= 1):
+        raise AssertionError("Maxtasks {!r} is not valid".format(maxtasks))
+    put = outqueue.put
+    get = inqueue.get
+    if hasattr(inqueue, '_writer'):
+        inqueue._writer.close()
+        outqueue._reader.close()
+
+    if initializer is not None:
+        initializer(*initargs)
+
+    completed = 0
+    while maxtasks is None or (maxtasks and completed < maxtasks):
+        try:
+            task = get()
+        except (EOFError, OSError):
+            util.debug('worker got EOFError or OSError -- exiting')
+            break
+
+        if task is None:
+            util.debug('worker got sentinel -- exiting')
+            break
+
+        job, i, func, args, kwds = task
+        try:
+            result = (True, func(*args, **kwds))
+        except Exception as e:
+            if wrap_exception and func is not _helper_reraises_exception:
+                e = ExceptionWithTraceback(e, e.__traceback__)
+            result = (False, e)
+        try:
+            put((job, i, result))
+        except Exception as e:
+            wrapped = MaybeEncodingError(e, result[1])
+            util.debug("Possible encoding error while sending result: %s" % (
+                wrapped))
+            put((job, i, (False, wrapped)))
+
+        task = job = result = func = args = kwds = None
+        completed += 1
+    util.debug('worker exiting after %d tasks' % completed)
+
+def _helper_reraises_exception(ex):
+    'Pickle-able helper function for use by _guarded_task_generation.'
+    raise ex
+
+#
+# Class representing a process pool
+#
+
+class _PoolCache(dict):
+    """
+    Class that implements a cache for the Pool class that will notify
+    the pool management threads every time the cache is emptied. The
+    notification is done by the use of a queue that is provided when
+    instantiating the cache.
+    """
+    def __init__(self, /, *args, notifier=None, **kwds):
+        self.notifier = notifier
+        super().__init__(*args, **kwds)
+
+    def __delitem__(self, item):
+        super().__delitem__(item)
+
+        # Notify that the cache is empty. This is important because the
+        # pool keeps maintaining workers until the cache gets drained. This
+        # eliminates a race condition in which a task is finished after the
+        # the pool's _handle_workers method has enter another iteration of the
+        # loop. In this situation, the only event that can wake up the pool
+        # is the cache to be emptied (no more tasks available).
+        if not self:
+            self.notifier.put(None)
+
+class Pool(object):
+    '''
+    Class which supports an async version of applying functions to arguments.
+    '''
+    _wrap_exception = True
+
+    @staticmethod
+    def Process(ctx, *args, **kwds):
+        return ctx.Process(*args, **kwds)
+
+    def __init__(self, processes=None, initializer=None, initargs=(),
+                 maxtasksperchild=None, context=None):
+        # Attributes initialized early to make sure that they exist in
+        # __del__() if __init__() raises an exception
+        self._pool = []
+        self._state = INIT
+
+        self._ctx = context or get_context()
+        self._setup_queues()
+        self._taskqueue = queue.SimpleQueue()
+        # The _change_notifier queue exist to wake up self._handle_workers()
+        # when the cache (self._cache) is empty or when there is a change in
+        # the _state variable of the thread that runs _handle_workers.
+        self._change_notifier = self._ctx.SimpleQueue()
+        self._cache = _PoolCache(notifier=self._change_notifier)
+        self._maxtasksperchild = maxtasksperchild
+        self._initializer = initializer
+        self._initargs = initargs
+
+        if processes is None:
+            processes = os.process_cpu_count() or 1
+        if processes < 1:
+            raise ValueError("Number of processes must be at least 1")
+        if maxtasksperchild is not None:
+            if not isinstance(maxtasksperchild, int) or maxtasksperchild <= 0:
+                raise ValueError("maxtasksperchild must be a positive int or None")
+
+        if initializer is not None and not callable(initializer):
+            raise TypeError('initializer must be a callable')
+
+        self._processes = processes
+        try:
+            self._repopulate_pool()
+        except Exception:
+            for p in self._pool:
+                if p.exitcode is None:
+                    p.terminate()
+            for p in self._pool:
+                p.join()
+            raise
+
+        sentinels = self._get_sentinels()
+
+        self._worker_handler = threading.Thread(
+            target=Pool._handle_workers,
+            args=(self._cache, self._taskqueue, self._ctx, self.Process,
+                  self._processes, self._pool, self._inqueue, self._outqueue,
+                  self._initializer, self._initargs, self._maxtasksperchild,
+                  self._wrap_exception, sentinels, self._change_notifier)
+            )
+        self._worker_handler.daemon = True
+        self._worker_handler._state = RUN
+        self._worker_handler.start()
+
+
+        self._task_handler = threading.Thread(
+            target=Pool._handle_tasks,
+            args=(self._taskqueue, self._quick_put, self._outqueue,
+                  self._pool, self._cache)
+            )
+        self._task_handler.daemon = True
+        self._task_handler._state = RUN
+        self._task_handler.start()
+
+        self._result_handler = threading.Thread(
+            target=Pool._handle_results,
+            args=(self._outqueue, self._quick_get, self._cache)
+            )
+        self._result_handler.daemon = True
+        self._result_handler._state = RUN
+        self._result_handler.start()
+
+        self._terminate = util.Finalize(
+            self, self._terminate_pool,
+            args=(self._taskqueue, self._inqueue, self._outqueue, self._pool,
+                  self._change_notifier, self._worker_handler, self._task_handler,
+                  self._result_handler, self._cache),
+            exitpriority=15
+            )
+        self._state = RUN
+
+    # Copy globals as function locals to make sure that they are available
+    # during Python shutdown when the Pool is destroyed.
+    def __del__(self, _warn=warnings.warn, RUN=RUN):
+        if self._state == RUN:
+            _warn(f"unclosed running multiprocessing pool {self!r}",
+                  ResourceWarning, source=self)
+            if getattr(self, '_change_notifier', None) is not None:
+                self._change_notifier.put(None)
+
+    def __repr__(self):
+        cls = self.__class__
+        return (f'<{cls.__module__}.{cls.__qualname__} '
+                f'state={self._state} '
+                f'pool_size={len(self._pool)}>')
+
+    def _get_sentinels(self):
+        task_queue_sentinels = [self._outqueue._reader]
+        self_notifier_sentinels = [self._change_notifier._reader]
+        return [*task_queue_sentinels, *self_notifier_sentinels]
+
+    @staticmethod
+    def _get_worker_sentinels(workers):
+        return [worker.sentinel for worker in
+                workers if hasattr(worker, "sentinel")]
+
+    @staticmethod
+    def _join_exited_workers(pool):
+        """Cleanup after any worker processes which have exited due to reaching
+        their specified lifetime.  Returns True if any workers were cleaned up.
+        """
+        cleaned = False
+        for i in reversed(range(len(pool))):
+            worker = pool[i]
+            if worker.exitcode is not None:
+                # worker exited
+                util.debug('cleaning up worker %d' % i)
+                worker.join()
+                cleaned = True
+                del pool[i]
+        return cleaned
+
+    def _repopulate_pool(self):
+        return self._repopulate_pool_static(self._ctx, self.Process,
+                                            self._processes,
+                                            self._pool, self._inqueue,
+                                            self._outqueue, self._initializer,
+                                            self._initargs,
+                                            self._maxtasksperchild,
+                                            self._wrap_exception)
+
+    @staticmethod
+    def _repopulate_pool_static(ctx, Process, processes, pool, inqueue,
+                                outqueue, initializer, initargs,
+                                maxtasksperchild, wrap_exception):
+        """Bring the number of pool processes up to the specified number,
+        for use after reaping workers which have exited.
+        """
+        for i in range(processes - len(pool)):
+            w = Process(ctx, target=worker,
+                        args=(inqueue, outqueue,
+                              initializer,
+                              initargs, maxtasksperchild,
+                              wrap_exception))
+            w.name = w.name.replace('Process', 'PoolWorker')
+            w.daemon = True
+            w.start()
+            pool.append(w)
+            util.debug('added worker')
+
+    @staticmethod
+    def _maintain_pool(ctx, Process, processes, pool, inqueue, outqueue,
+                       initializer, initargs, maxtasksperchild,
+                       wrap_exception):
+        """Clean up any exited workers and start replacements for them.
+        """
+        if Pool._join_exited_workers(pool):
+            Pool._repopulate_pool_static(ctx, Process, processes, pool,
+                                         inqueue, outqueue, initializer,
+                                         initargs, maxtasksperchild,
+                                         wrap_exception)
+
+    def _setup_queues(self):
+        self._inqueue = self._ctx.SimpleQueue()
+        self._outqueue = self._ctx.SimpleQueue()
+        self._quick_put = self._inqueue._writer.send
+        self._quick_get = self._outqueue._reader.recv
+
+    def _check_running(self):
+        if self._state != RUN:
+            raise ValueError("Pool not running")
+
+    def apply(self, func, args=(), kwds={}):
+        '''
+        Equivalent of `func(*args, **kwds)`.
+        Pool must be running.
+        '''
+        return self.apply_async(func, args, kwds).get()
+
+    def map(self, func, iterable, chunksize=None):
+        '''
+        Apply `func` to each element in `iterable`, collecting the results
+        in a list that is returned.
+        '''
+        return self._map_async(func, iterable, mapstar, chunksize).get()
+
+    def starmap(self, func, iterable, chunksize=None):
+        '''
+        Like `map()` method but the elements of the `iterable` are expected to
+        be iterables as well and will be unpacked as arguments. Hence
+        `func` and (a, b) becomes func(a, b).
+        '''
+        return self._map_async(func, iterable, starmapstar, chunksize).get()
+
+    def starmap_async(self, func, iterable, chunksize=None, callback=None,
+            error_callback=None):
+        '''
+        Asynchronous version of `starmap()` method.
+        '''
+        return self._map_async(func, iterable, starmapstar, chunksize,
+                               callback, error_callback)
+
+    def _guarded_task_generation(self, result_job, func, iterable):
+        '''Provides a generator of tasks for imap and imap_unordered with
+        appropriate handling for iterables which throw exceptions during
+        iteration.'''
+        try:
+            i = -1
+            for i, x in enumerate(iterable):
+                yield (result_job, i, func, (x,), {})
+        except Exception as e:
+            yield (result_job, i+1, _helper_reraises_exception, (e,), {})
+
+    def imap(self, func, iterable, chunksize=1):
+        '''
+        Equivalent of `map()` -- can be MUCH slower than `Pool.map()`.
+        '''
+        self._check_running()
+        if chunksize == 1:
+            result = IMapIterator(self)
+            self._taskqueue.put(
+                (
+                    self._guarded_task_generation(result._job, func, iterable),
+                    result._set_length
+                ))
+            return result
+        else:
+            if chunksize < 1:
+                raise ValueError(
+                    "Chunksize must be 1+, not {0:n}".format(
+                        chunksize))
+            task_batches = Pool._get_tasks(func, iterable, chunksize)
+            result = IMapIterator(self)
+            self._taskqueue.put(
+                (
+                    self._guarded_task_generation(result._job,
+                                                  mapstar,
+                                                  task_batches),
+                    result._set_length
+                ))
+            return (item for chunk in result for item in chunk)
+
+    def imap_unordered(self, func, iterable, chunksize=1):
+        '''
+        Like `imap()` method but ordering of results is arbitrary.
+        '''
+        self._check_running()
+        if chunksize == 1:
+            result = IMapUnorderedIterator(self)
+            self._taskqueue.put(
+                (
+                    self._guarded_task_generation(result._job, func, iterable),
+                    result._set_length
+                ))
+            return result
+        else:
+            if chunksize < 1:
+                raise ValueError(
+                    "Chunksize must be 1+, not {0!r}".format(chunksize))
+            task_batches = Pool._get_tasks(func, iterable, chunksize)
+            result = IMapUnorderedIterator(self)
+            self._taskqueue.put(
+                (
+                    self._guarded_task_generation(result._job,
+                                                  mapstar,
+                                                  task_batches),
+                    result._set_length
+                ))
+            return (item for chunk in result for item in chunk)
+
+    def apply_async(self, func, args=(), kwds={}, callback=None,
+            error_callback=None):
+        '''
+        Asynchronous version of `apply()` method.
+        '''
+        self._check_running()
+        result = ApplyResult(self, callback, error_callback)
+        self._taskqueue.put(([(result._job, 0, func, args, kwds)], None))
+        return result
+
+    def map_async(self, func, iterable, chunksize=None, callback=None,
+            error_callback=None):
+        '''
+        Asynchronous version of `map()` method.
+        '''
+        return self._map_async(func, iterable, mapstar, chunksize, callback,
+            error_callback)
+
+    def _map_async(self, func, iterable, mapper, chunksize=None, callback=None,
+            error_callback=None):
+        '''
+        Helper function to implement map, starmap and their async counterparts.
+        '''
+        self._check_running()
+        if not hasattr(iterable, '__len__'):
+            iterable = list(iterable)
+
+        if chunksize is None:
+            chunksize, extra = divmod(len(iterable), len(self._pool) * 4)
+            if extra:
+                chunksize += 1
+        if len(iterable) == 0:
+            chunksize = 0
+
+        task_batches = Pool._get_tasks(func, iterable, chunksize)
+        result = MapResult(self, chunksize, len(iterable), callback,
+                           error_callback=error_callback)
+        self._taskqueue.put(
+            (
+                self._guarded_task_generation(result._job,
+                                              mapper,
+                                              task_batches),
+                None
+            )
+        )
+        return result
+
+    @staticmethod
+    def _wait_for_updates(sentinels, change_notifier, timeout=None):
+        wait(sentinels, timeout=timeout)
+        while not change_notifier.empty():
+            change_notifier.get()
+
+    @classmethod
+    def _handle_workers(cls, cache, taskqueue, ctx, Process, processes,
+                        pool, inqueue, outqueue, initializer, initargs,
+                        maxtasksperchild, wrap_exception, sentinels,
+                        change_notifier):
+        thread = threading.current_thread()
+
+        # Keep maintaining workers until the cache gets drained, unless the pool
+        # is terminated.
+        while thread._state == RUN or (cache and thread._state != TERMINATE):
+            cls._maintain_pool(ctx, Process, processes, pool, inqueue,
+                               outqueue, initializer, initargs,
+                               maxtasksperchild, wrap_exception)
+
+            current_sentinels = [*cls._get_worker_sentinels(pool), *sentinels]
+
+            cls._wait_for_updates(current_sentinels, change_notifier)
+        # send sentinel to stop workers
+        taskqueue.put(None)
+        util.debug('worker handler exiting')
+
+    @staticmethod
+    def _handle_tasks(taskqueue, put, outqueue, pool, cache):
+        thread = threading.current_thread()
+
+        for taskseq, set_length in iter(taskqueue.get, None):
+            task = None
+            try:
+                # iterating taskseq cannot fail
+                for task in taskseq:
+                    if thread._state != RUN:
+                        util.debug('task handler found thread._state != RUN')
+                        break
+                    try:
+                        put(task)
+                    except Exception as e:
+                        job, idx = task[:2]
+                        try:
+                            cache[job]._set(idx, (False, e))
+                        except KeyError:
+                            pass
+                else:
+                    if set_length:
+                        util.debug('doing set_length()')
+                        idx = task[1] if task else -1
+                        set_length(idx + 1)
+                    continue
+                break
+            finally:
+                task = taskseq = job = None
+        else:
+            util.debug('task handler got sentinel')
+
+        try:
+            # tell result handler to finish when cache is empty
+            util.debug('task handler sending sentinel to result handler')
+            outqueue.put(None)
+
+            # tell workers there is no more work
+            util.debug('task handler sending sentinel to workers')
+            for p in pool:
+                put(None)
+        except OSError:
+            util.debug('task handler got OSError when sending sentinels')
+
+        util.debug('task handler exiting')
+
+    @staticmethod
+    def _handle_results(outqueue, get, cache):
+        thread = threading.current_thread()
+
+        while 1:
+            try:
+                task = get()
+            except (OSError, EOFError):
+                util.debug('result handler got EOFError/OSError -- exiting')
+                return
+
+            if thread._state != RUN:
+                assert thread._state == TERMINATE, "Thread not in TERMINATE"
+                util.debug('result handler found thread._state=TERMINATE')
+                break
+
+            if task is None:
+                util.debug('result handler got sentinel')
+                break
+
+            job, i, obj = task
+            try:
+                cache[job]._set(i, obj)
+            except KeyError:
+                pass
+            task = job = obj = None
+
+        while cache and thread._state != TERMINATE:
+            try:
+                task = get()
+            except (OSError, EOFError):
+                util.debug('result handler got EOFError/OSError -- exiting')
+                return
+
+            if task is None:
+                util.debug('result handler ignoring extra sentinel')
+                continue
+            job, i, obj = task
+            try:
+                cache[job]._set(i, obj)
+            except KeyError:
+                pass
+            task = job = obj = None
+
+        if hasattr(outqueue, '_reader'):
+            util.debug('ensuring that outqueue is not full')
+            # If we don't make room available in outqueue then
+            # attempts to add the sentinel (None) to outqueue may
+            # block.  There is guaranteed to be no more than 2 sentinels.
+            try:
+                for i in range(10):
+                    if not outqueue._reader.poll():
+                        break
+                    get()
+            except (OSError, EOFError):
+                pass
+
+        util.debug('result handler exiting: len(cache)=%s, thread._state=%s',
+              len(cache), thread._state)
+
+    @staticmethod
+    def _get_tasks(func, it, size):
+        it = iter(it)
+        while 1:
+            x = tuple(itertools.islice(it, size))
+            if not x:
+                return
+            yield (func, x)
+
+    def __reduce__(self):
+        raise NotImplementedError(
+              'pool objects cannot be passed between processes or pickled'
+              )
+
+    def close(self):
+        util.debug('closing pool')
+        if self._state == RUN:
+            self._state = CLOSE
+            self._worker_handler._state = CLOSE
+            self._change_notifier.put(None)
+
+    def terminate(self):
+        util.debug('terminating pool')
+        self._state = TERMINATE
+        self._terminate()
+
+    def join(self):
+        util.debug('joining pool')
+        if self._state == RUN:
+            raise ValueError("Pool is still running")
+        elif self._state not in (CLOSE, TERMINATE):
+            raise ValueError("In unknown state")
+        self._worker_handler.join()
+        self._task_handler.join()
+        self._result_handler.join()
+        for p in self._pool:
+            p.join()
+
+    @staticmethod
+    def _help_stuff_finish(inqueue, task_handler, size):
+        # task_handler may be blocked trying to put items on inqueue
+        util.debug('removing tasks from inqueue until task handler finished')
+        inqueue._rlock.acquire()
+        while task_handler.is_alive() and inqueue._reader.poll():
+            inqueue._reader.recv()
+            time.sleep(0)
+
+    @classmethod
+    def _terminate_pool(cls, taskqueue, inqueue, outqueue, pool, change_notifier,
+                        worker_handler, task_handler, result_handler, cache):
+        # this is guaranteed to only be called once
+        util.debug('finalizing pool')
+
+        # Notify that the worker_handler state has been changed so the
+        # _handle_workers loop can be unblocked (and exited) in order to
+        # send the finalization sentinel all the workers.
+        worker_handler._state = TERMINATE
+        change_notifier.put(None)
+
+        task_handler._state = TERMINATE
+
+        util.debug('helping task handler/workers to finish')
+        cls._help_stuff_finish(inqueue, task_handler, len(pool))
+
+        if (not result_handler.is_alive()) and (len(cache) != 0):
+            raise AssertionError(
+                "Cannot have cache with result_handler not alive")
+
+        result_handler._state = TERMINATE
+        change_notifier.put(None)
+        outqueue.put(None)                  # sentinel
+
+        # We must wait for the worker handler to exit before terminating
+        # workers because we don't want workers to be restarted behind our back.
+        util.debug('joining worker handler')
+        if threading.current_thread() is not worker_handler:
+            worker_handler.join()
+
+        # Terminate workers which haven't already finished.
+        if pool and hasattr(pool[0], 'terminate'):
+            util.debug('terminating workers')
+            for p in pool:
+                if p.exitcode is None:
+                    p.terminate()
+
+        util.debug('joining task handler')
+        if threading.current_thread() is not task_handler:
+            task_handler.join()
+
+        util.debug('joining result handler')
+        if threading.current_thread() is not result_handler:
+            result_handler.join()
+
+        if pool and hasattr(pool[0], 'terminate'):
+            util.debug('joining pool workers')
+            for p in pool:
+                if p.is_alive():
+                    # worker has not yet exited
+                    util.debug('cleaning up worker %d' % p.pid)
+                    p.join()
+
+    def __enter__(self):
+        self._check_running()
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        self.terminate()
+
+#
+# Class whose instances are returned by `Pool.apply_async()`
+#
+
+class ApplyResult(object):
+
+    def __init__(self, pool, callback, error_callback):
+        self._pool = pool
+        self._event = threading.Event()
+        self._job = next(job_counter)
+        self._cache = pool._cache
+        self._callback = callback
+        self._error_callback = error_callback
+        self._cache[self._job] = self
+
+    def ready(self):
+        return self._event.is_set()
+
+    def successful(self):
+        if not self.ready():
+            raise ValueError("{0!r} not ready".format(self))
+        return self._success
+
+    def wait(self, timeout=None):
+        self._event.wait(timeout)
+
+    def get(self, timeout=None):
+        self.wait(timeout)
+        if not self.ready():
+            raise TimeoutError
+        if self._success:
+            return self._value
+        else:
+            raise self._value
+
+    def _set(self, i, obj):
+        self._success, self._value = obj
+        if self._callback and self._success:
+            self._callback(self._value)
+        if self._error_callback and not self._success:
+            self._error_callback(self._value)
+        self._event.set()
+        del self._cache[self._job]
+        self._pool = None
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+AsyncResult = ApplyResult       # create alias -- see #17805
+
+#
+# Class whose instances are returned by `Pool.map_async()`
+#
+
+class MapResult(ApplyResult):
+
+    def __init__(self, pool, chunksize, length, callback, error_callback):
+        ApplyResult.__init__(self, pool, callback,
+                             error_callback=error_callback)
+        self._success = True
+        self._value = [None] * length
+        self._chunksize = chunksize
+        if chunksize <= 0:
+            self._number_left = 0
+            self._event.set()
+            del self._cache[self._job]
+        else:
+            self._number_left = length//chunksize + bool(length % chunksize)
+
+    def _set(self, i, success_result):
+        self._number_left -= 1
+        success, result = success_result
+        if success and self._success:
+            self._value[i*self._chunksize:(i+1)*self._chunksize] = result
+            if self._number_left == 0:
+                if self._callback:
+                    self._callback(self._value)
+                del self._cache[self._job]
+                self._event.set()
+                self._pool = None
+        else:
+            if not success and self._success:
+                # only store first exception
+                self._success = False
+                self._value = result
+            if self._number_left == 0:
+                # only consider the result ready once all jobs are done
+                if self._error_callback:
+                    self._error_callback(self._value)
+                del self._cache[self._job]
+                self._event.set()
+                self._pool = None
+
+#
+# Class whose instances are returned by `Pool.imap()`
+#
+
+class IMapIterator(object):
+
+    def __init__(self, pool):
+        self._pool = pool
+        self._cond = threading.Condition(threading.Lock())
+        self._job = next(job_counter)
+        self._cache = pool._cache
+        self._items = collections.deque()
+        self._index = 0
+        self._length = None
+        self._unsorted = {}
+        self._cache[self._job] = self
+
+    def __iter__(self):
+        return self
+
+    def next(self, timeout=None):
+        with self._cond:
+            try:
+                item = self._items.popleft()
+            except IndexError:
+                if self._index == self._length:
+                    self._pool = None
+                    raise StopIteration from None
+                self._cond.wait(timeout)
+                try:
+                    item = self._items.popleft()
+                except IndexError:
+                    if self._index == self._length:
+                        self._pool = None
+                        raise StopIteration from None
+                    raise TimeoutError from None
+
+        success, value = item
+        if success:
+            return value
+        raise value
+
+    __next__ = next                    # XXX
+
+    def _set(self, i, obj):
+        with self._cond:
+            if self._index == i:
+                self._items.append(obj)
+                self._index += 1
+                while self._index in self._unsorted:
+                    obj = self._unsorted.pop(self._index)
+                    self._items.append(obj)
+                    self._index += 1
+                self._cond.notify()
+            else:
+                self._unsorted[i] = obj
+
+            if self._index == self._length:
+                del self._cache[self._job]
+                self._pool = None
+
+    def _set_length(self, length):
+        with self._cond:
+            self._length = length
+            if self._index == self._length:
+                self._cond.notify()
+                del self._cache[self._job]
+                self._pool = None
+
+#
+# Class whose instances are returned by `Pool.imap_unordered()`
+#
+
+class IMapUnorderedIterator(IMapIterator):
+
+    def _set(self, i, obj):
+        with self._cond:
+            self._items.append(obj)
+            self._index += 1
+            self._cond.notify()
+            if self._index == self._length:
+                del self._cache[self._job]
+                self._pool = None
+
+#
+#
+#
+
+class ThreadPool(Pool):
+    _wrap_exception = False
+
+    @staticmethod
+    def Process(ctx, *args, **kwds):
+        from .dummy import Process
+        return Process(*args, **kwds)
+
+    def __init__(self, processes=None, initializer=None, initargs=()):
+        Pool.__init__(self, processes, initializer, initargs)
+
+    def _setup_queues(self):
+        self._inqueue = queue.SimpleQueue()
+        self._outqueue = queue.SimpleQueue()
+        self._quick_put = self._inqueue.put
+        self._quick_get = self._outqueue.get
+
+    def _get_sentinels(self):
+        return [self._change_notifier._reader]
+
+    @staticmethod
+    def _get_worker_sentinels(workers):
+        return []
+
+    @staticmethod
+    def _help_stuff_finish(inqueue, task_handler, size):
+        # drain inqueue, and put sentinels at its head to make workers finish
+        try:
+            while True:
+                inqueue.get(block=False)
+        except queue.Empty:
+            pass
+        for i in range(size):
+            inqueue.put(None)
+
+    def _wait_for_updates(self, sentinels, change_notifier, timeout):
+        time.sleep(timeout)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_fork.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_fork.py
new file mode 100644
index 0000000000000000000000000000000000000000..7affa1b985f0916982d1022e623fa1d450f5ec7c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_fork.py
@@ -0,0 +1,90 @@
+import atexit
+import os
+import signal
+
+from . import util
+
+__all__ = ['Popen']
+
+#
+# Start child process using fork
+#
+
+class Popen(object):
+    method = 'fork'
+
+    def __init__(self, process_obj):
+        util._flush_std_streams()
+        self.returncode = None
+        self.finalizer = None
+        self._launch(process_obj)
+
+    def duplicate_for_child(self, fd):
+        return fd
+
+    def poll(self, flag=os.WNOHANG):
+        if self.returncode is None:
+            try:
+                pid, sts = os.waitpid(self.pid, flag)
+            except OSError:
+                # Child process not yet created. See #1731717
+                # e.errno == errno.ECHILD == 10
+                return None
+            if pid == self.pid:
+                self.returncode = os.waitstatus_to_exitcode(sts)
+        return self.returncode
+
+    def wait(self, timeout=None):
+        if self.returncode is None:
+            if timeout is not None:
+                from multiprocessing.connection import wait
+                if not wait([self.sentinel], timeout):
+                    return None
+            # This shouldn't block if wait() returned successfully.
+            return self.poll(os.WNOHANG if timeout == 0.0 else 0)
+        return self.returncode
+
+    def _send_signal(self, sig):
+        if self.returncode is None:
+            try:
+                os.kill(self.pid, sig)
+            except ProcessLookupError:
+                pass
+            except OSError:
+                if self.wait(timeout=0.1) is None:
+                    raise
+
+    def interrupt(self):
+        self._send_signal(signal.SIGINT)
+
+    def terminate(self):
+        self._send_signal(signal.SIGTERM)
+
+    def kill(self):
+        self._send_signal(signal.SIGKILL)
+
+    def _launch(self, process_obj):
+        code = 1
+        parent_r, child_w = os.pipe()
+        child_r, parent_w = os.pipe()
+        self.pid = os.fork()
+        if self.pid == 0:
+            try:
+                atexit._clear()
+                atexit.register(util._exit_function)
+                os.close(parent_r)
+                os.close(parent_w)
+                code = process_obj._bootstrap(parent_sentinel=child_r)
+            finally:
+                atexit._run_exitfuncs()
+                os._exit(code)
+        else:
+            os.close(child_w)
+            os.close(child_r)
+            self.finalizer = util.Finalize(self, util.close_fds,
+                                           (parent_r, parent_w,))
+            self.sentinel = parent_r
+
+    def close(self):
+        if self.finalizer is not None:
+            self.finalizer()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_forkserver.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_forkserver.py
new file mode 100644
index 0000000000000000000000000000000000000000..a56eb9bf11080b0d499ae81cfef7b501545cb90e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_forkserver.py
@@ -0,0 +1,74 @@
+import io
+import os
+
+from .context import reduction, set_spawning_popen
+if not reduction.HAVE_SEND_HANDLE:
+    raise ImportError('No support for sending fds between processes')
+from . import forkserver
+from . import popen_fork
+from . import spawn
+from . import util
+
+
+__all__ = ['Popen']
+
+#
+# Wrapper for an fd used while launching a process
+#
+
+class _DupFd(object):
+    def __init__(self, ind):
+        self.ind = ind
+    def detach(self):
+        return forkserver.get_inherited_fds()[self.ind]
+
+#
+# Start child process using a server process
+#
+
+class Popen(popen_fork.Popen):
+    method = 'forkserver'
+    DupFd = _DupFd
+
+    def __init__(self, process_obj):
+        self._fds = []
+        super().__init__(process_obj)
+
+    def duplicate_for_child(self, fd):
+        self._fds.append(fd)
+        return len(self._fds) - 1
+
+    def _launch(self, process_obj):
+        prep_data = spawn.get_preparation_data(process_obj._name)
+        buf = io.BytesIO()
+        set_spawning_popen(self)
+        try:
+            reduction.dump(prep_data, buf)
+            reduction.dump(process_obj, buf)
+        finally:
+            set_spawning_popen(None)
+
+        self.sentinel, w = forkserver.connect_to_new_process(self._fds)
+        # Keep a duplicate of the data pipe's write end as a sentinel of the
+        # parent process used by the child process.
+        _parent_w = os.dup(w)
+        self.finalizer = util.Finalize(self, util.close_fds,
+                                       (_parent_w, self.sentinel))
+        with open(w, 'wb', closefd=True) as f:
+            f.write(buf.getbuffer())
+        self.pid = forkserver.read_signed(self.sentinel)
+
+    def poll(self, flag=os.WNOHANG):
+        if self.returncode is None:
+            from multiprocessing.connection import wait
+            timeout = 0 if flag == os.WNOHANG else None
+            if not wait([self.sentinel], timeout):
+                return None
+            try:
+                self.returncode = forkserver.read_signed(self.sentinel)
+            except (OSError, EOFError):
+                # This should not happen usually, but perhaps the forkserver
+                # process itself got killed
+                self.returncode = 255
+
+        return self.returncode
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_posix.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_posix.py
new file mode 100644
index 0000000000000000000000000000000000000000..cccd659ae776377921d36dc17cd12ec8cd24fee3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_posix.py
@@ -0,0 +1,76 @@
+import io
+import os
+
+from .context import reduction, set_spawning_popen
+from . import popen_fork
+from . import spawn
+from . import util
+
+__all__ = ['Popen']
+
+
+#
+# Wrapper for an fd used while launching a process
+#
+
+class _DupFd(object):
+    def __init__(self, fd):
+        self.fd = fd
+    def detach(self):
+        return self.fd
+
+#
+# Start child process using a fresh interpreter
+#
+
+class Popen(popen_fork.Popen):
+    method = 'spawn'
+    DupFd = _DupFd
+
+    def __init__(self, process_obj):
+        self._fds = []
+        super().__init__(process_obj)
+
+    def duplicate_for_child(self, fd):
+        self._fds.append(fd)
+        return fd
+
+    def _launch(self, process_obj):
+        from . import resource_tracker
+        tracker_fd = resource_tracker.getfd()
+        self._fds.append(tracker_fd)
+        prep_data = spawn.get_preparation_data(process_obj._name)
+        fp = io.BytesIO()
+        set_spawning_popen(self)
+        try:
+            reduction.dump(prep_data, fp)
+            reduction.dump(process_obj, fp)
+        finally:
+            set_spawning_popen(None)
+
+        parent_r = child_w = child_r = parent_w = None
+        try:
+            parent_r, child_w = os.pipe()
+            child_r, parent_w = os.pipe()
+            cmd = spawn.get_command_line(tracker_fd=tracker_fd,
+                                         pipe_handle=child_r)
+            self._fds.extend([child_r, child_w])
+            self.pid = util.spawnv_passfds(spawn.get_executable(),
+                                           cmd, self._fds)
+            os.close(child_r)
+            child_r = None
+            os.close(child_w)
+            child_w = None
+            self.sentinel = parent_r
+            with open(parent_w, 'wb', closefd=False) as f:
+                f.write(fp.getbuffer())
+        finally:
+            fds_to_close = []
+            for fd in (parent_r, parent_w):
+                if fd is not None:
+                    fds_to_close.append(fd)
+            self.finalizer = util.Finalize(self, util.close_fds, fds_to_close)
+
+            for fd in (child_r, child_w):
+                if fd is not None:
+                    os.close(fd)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_win32.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_win32.py
new file mode 100644
index 0000000000000000000000000000000000000000..62fb0ddbf91a5d0291ae9808d1915583d6df598a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/popen_spawn_win32.py
@@ -0,0 +1,147 @@
+import os
+import msvcrt
+import signal
+import sys
+import _winapi
+from subprocess import STARTUPINFO, STARTF_FORCEOFFFEEDBACK
+
+from .context import reduction, get_spawning_popen, set_spawning_popen
+from . import spawn
+from . import util
+
+__all__ = ['Popen']
+
+#
+#
+#
+
+# Exit code used by Popen.terminate()
+TERMINATE = 0x10000
+WINEXE = (sys.platform == 'win32' and getattr(sys, 'frozen', False))
+WINSERVICE = sys.executable.lower().endswith("pythonservice.exe")
+
+
+def _path_eq(p1, p2):
+    return p1 == p2 or os.path.normcase(p1) == os.path.normcase(p2)
+
+WINENV = not _path_eq(sys.executable, sys._base_executable)
+
+
+def _close_handles(*handles):
+    for handle in handles:
+        _winapi.CloseHandle(handle)
+
+
+#
+# We define a Popen class similar to the one from subprocess, but
+# whose constructor takes a process object as its argument.
+#
+
+class Popen(object):
+    '''
+    Start a subprocess to run the code of a process object
+    '''
+    method = 'spawn'
+
+    def __init__(self, process_obj):
+        prep_data = spawn.get_preparation_data(process_obj._name)
+
+        # read end of pipe will be duplicated by the child process
+        # -- see spawn_main() in spawn.py.
+        #
+        # bpo-33929: Previously, the read end of pipe was "stolen" by the child
+        # process, but it leaked a handle if the child process had been
+        # terminated before it could steal the handle from the parent process.
+        rhandle, whandle = _winapi.CreatePipe(None, 0)
+        wfd = msvcrt.open_osfhandle(whandle, 0)
+        cmd = spawn.get_command_line(parent_pid=os.getpid(),
+                                     pipe_handle=rhandle)
+
+        python_exe = spawn.get_executable()
+
+        # bpo-35797: When running in a venv, we bypass the redirect
+        # executor and launch our base Python.
+        if WINENV and _path_eq(python_exe, sys.executable):
+            cmd[0] = python_exe = sys._base_executable
+            env = os.environ.copy()
+            env["__PYVENV_LAUNCHER__"] = sys.executable
+        else:
+            env = None
+
+        cmd = ' '.join('"%s"' % x for x in cmd)
+
+        with open(wfd, 'wb', closefd=True) as to_child:
+            # start process
+            try:
+                hp, ht, pid, tid = _winapi.CreateProcess(
+                    python_exe, cmd,
+                    None, None, False, 0, env, None,
+                    STARTUPINFO(dwFlags=STARTF_FORCEOFFFEEDBACK))
+                _winapi.CloseHandle(ht)
+            except:
+                _winapi.CloseHandle(rhandle)
+                raise
+
+            # set attributes of self
+            self.pid = pid
+            self.returncode = None
+            self._handle = hp
+            self.sentinel = int(hp)
+            self.finalizer = util.Finalize(self, _close_handles,
+                                           (self.sentinel, int(rhandle)))
+
+            # send information to child
+            set_spawning_popen(self)
+            try:
+                reduction.dump(prep_data, to_child)
+                reduction.dump(process_obj, to_child)
+            finally:
+                set_spawning_popen(None)
+
+    def duplicate_for_child(self, handle):
+        assert self is get_spawning_popen()
+        return reduction.duplicate(handle, self.sentinel)
+
+    def wait(self, timeout=None):
+        if self.returncode is not None:
+            return self.returncode
+
+        if timeout is None:
+            msecs = _winapi.INFINITE
+        else:
+            msecs = max(0, int(timeout * 1000 + 0.5))
+
+        res = _winapi.WaitForSingleObject(int(self._handle), msecs)
+        if res == _winapi.WAIT_OBJECT_0:
+            code = _winapi.GetExitCodeProcess(self._handle)
+            if code == TERMINATE:
+                code = -signal.SIGTERM
+            self.returncode = code
+
+        return self.returncode
+
+    def poll(self):
+        return self.wait(timeout=0)
+
+    def terminate(self):
+        if self.returncode is not None:
+            return
+
+        try:
+            _winapi.TerminateProcess(int(self._handle), TERMINATE)
+        except PermissionError:
+            # ERROR_ACCESS_DENIED (winerror 5) is received when the
+            # process already died.
+            code = _winapi.GetExitCodeProcess(int(self._handle))
+            if code == _winapi.STILL_ACTIVE:
+                raise
+
+        # gh-113009: Don't set self.returncode. Even if GetExitCodeProcess()
+        # returns an exit code different than STILL_ACTIVE, the process can
+        # still be running. Only set self.returncode once WaitForSingleObject()
+        # returns WAIT_OBJECT_0 in wait().
+
+    kill = terminate
+
+    def close(self):
+        self.finalizer()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/process.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/process.py
new file mode 100644
index 0000000000000000000000000000000000000000..262513f295fde56f2a0ca763e15ab4fb43d68424
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/process.py
@@ -0,0 +1,443 @@
+#
+# Module providing the `Process` class which emulates `threading.Thread`
+#
+# multiprocessing/process.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = ['BaseProcess', 'current_process', 'active_children',
+           'parent_process']
+
+#
+# Imports
+#
+
+import os
+import sys
+import signal
+import itertools
+import threading
+from _weakrefset import WeakSet
+
+#
+#
+#
+
+try:
+    ORIGINAL_DIR = os.path.abspath(os.getcwd())
+except OSError:
+    ORIGINAL_DIR = None
+
+#
+# Public functions
+#
+
+def current_process():
+    '''
+    Return process object representing the current process
+    '''
+    return _current_process
+
+def active_children():
+    '''
+    Return list of process objects corresponding to live child processes
+    '''
+    _cleanup()
+    return list(_children)
+
+
+def parent_process():
+    '''
+    Return process object representing the parent process
+    '''
+    return _parent_process
+
+#
+#
+#
+
+def _cleanup():
+    # check for processes which have finished
+    for p in list(_children):
+        if (child_popen := p._popen) and child_popen.poll() is not None:
+            _children.discard(p)
+
+#
+# The `Process` class
+#
+
+class BaseProcess(object):
+    '''
+    Process objects represent activity that is run in a separate process
+
+    The class is analogous to `threading.Thread`
+    '''
+    def _Popen(self):
+        raise NotImplementedError
+
+    def __init__(self, group=None, target=None, name=None, args=(), kwargs=None,
+                 *, daemon=None):
+        assert group is None, 'group argument must be None for now'
+        count = next(_process_counter)
+        self._identity = _current_process._identity + (count,)
+        self._config = _current_process._config.copy()
+        self._parent_pid = os.getpid()
+        self._parent_name = _current_process.name
+        self._popen = None
+        self._closed = False
+        self._target = target
+        self._args = tuple(args)
+        self._kwargs = dict(kwargs) if kwargs else {}
+        self._name = name or type(self).__name__ + '-' + \
+                     ':'.join(str(i) for i in self._identity)
+        if daemon is not None:
+            self.daemon = daemon
+        _dangling.add(self)
+
+    def _check_closed(self):
+        if self._closed:
+            raise ValueError("process object is closed")
+
+    def run(self):
+        '''
+        Method to be run in sub-process; can be overridden in sub-class
+        '''
+        if self._target:
+            self._target(*self._args, **self._kwargs)
+
+    def start(self):
+        '''
+        Start child process
+        '''
+        self._check_closed()
+        assert self._popen is None, 'cannot start a process twice'
+        assert self._parent_pid == os.getpid(), \
+               'can only start a process object created by current process'
+        assert not _current_process._config.get('daemon'), \
+               'daemonic processes are not allowed to have children'
+        _cleanup()
+        self._popen = self._Popen(self)
+        self._sentinel = self._popen.sentinel
+        # Avoid a refcycle if the target function holds an indirect
+        # reference to the process object (see bpo-30775)
+        del self._target, self._args, self._kwargs
+        _children.add(self)
+
+    def interrupt(self):
+        '''
+        Terminate process; sends SIGINT signal
+        '''
+        self._check_closed()
+        self._popen.interrupt()
+
+    def terminate(self):
+        '''
+        Terminate process; sends SIGTERM signal or uses TerminateProcess()
+        '''
+        self._check_closed()
+        self._popen.terminate()
+
+    def kill(self):
+        '''
+        Terminate process; sends SIGKILL signal or uses TerminateProcess()
+        '''
+        self._check_closed()
+        self._popen.kill()
+
+    def join(self, timeout=None):
+        '''
+        Wait until child process terminates
+        '''
+        self._check_closed()
+        assert self._parent_pid == os.getpid(), 'can only join a child process'
+        assert self._popen is not None, 'can only join a started process'
+        res = self._popen.wait(timeout)
+        if res is not None:
+            _children.discard(self)
+
+    def is_alive(self):
+        '''
+        Return whether process is alive
+        '''
+        self._check_closed()
+        if self is _current_process:
+            return True
+        assert self._parent_pid == os.getpid(), 'can only test a child process'
+
+        if self._popen is None:
+            return False
+
+        returncode = self._popen.poll()
+        if returncode is None:
+            return True
+        else:
+            _children.discard(self)
+            return False
+
+    def close(self):
+        '''
+        Close the Process object.
+
+        This method releases resources held by the Process object.  It is
+        an error to call this method if the child process is still running.
+        '''
+        if self._popen is not None:
+            if self._popen.poll() is None:
+                raise ValueError("Cannot close a process while it is still running. "
+                                 "You should first call join() or terminate().")
+            self._popen.close()
+            self._popen = None
+            del self._sentinel
+            _children.discard(self)
+        self._closed = True
+
+    @property
+    def name(self):
+        return self._name
+
+    @name.setter
+    def name(self, name):
+        assert isinstance(name, str), 'name must be a string'
+        self._name = name
+
+    @property
+    def daemon(self):
+        '''
+        Return whether process is a daemon
+        '''
+        return self._config.get('daemon', False)
+
+    @daemon.setter
+    def daemon(self, daemonic):
+        '''
+        Set whether process is a daemon
+        '''
+        assert self._popen is None, 'process has already started'
+        self._config['daemon'] = daemonic
+
+    @property
+    def authkey(self):
+        return self._config['authkey']
+
+    @authkey.setter
+    def authkey(self, authkey):
+        '''
+        Set authorization key of process
+        '''
+        self._config['authkey'] = AuthenticationString(authkey)
+
+    @property
+    def exitcode(self):
+        '''
+        Return exit code of process or `None` if it has yet to stop
+        '''
+        self._check_closed()
+        if self._popen is None:
+            return self._popen
+        return self._popen.poll()
+
+    @property
+    def ident(self):
+        '''
+        Return identifier (PID) of process or `None` if it has yet to start
+        '''
+        self._check_closed()
+        if self is _current_process:
+            return os.getpid()
+        else:
+            return self._popen and self._popen.pid
+
+    pid = ident
+
+    @property
+    def sentinel(self):
+        '''
+        Return a file descriptor (Unix) or handle (Windows) suitable for
+        waiting for process termination.
+        '''
+        self._check_closed()
+        try:
+            return self._sentinel
+        except AttributeError:
+            raise ValueError("process not started") from None
+
+    def __repr__(self):
+        exitcode = None
+        if self is _current_process:
+            status = 'started'
+        elif self._closed:
+            status = 'closed'
+        elif self._parent_pid != os.getpid():
+            status = 'unknown'
+        elif self._popen is None:
+            status = 'initial'
+        else:
+            exitcode = self._popen.poll()
+            if exitcode is not None:
+                status = 'stopped'
+            else:
+                status = 'started'
+
+        info = [type(self).__name__, 'name=%r' % self._name]
+        if self._popen is not None:
+            info.append('pid=%s' % self._popen.pid)
+        info.append('parent=%s' % self._parent_pid)
+        info.append(status)
+        if exitcode is not None:
+            exitcode = _exitcode_to_name.get(exitcode, exitcode)
+            info.append('exitcode=%s' % exitcode)
+        if self.daemon:
+            info.append('daemon')
+        return '<%s>' % ' '.join(info)
+
+    ##
+
+    def _bootstrap(self, parent_sentinel=None):
+        from . import util, context
+        global _current_process, _parent_process, _process_counter, _children
+
+        try:
+            if self._start_method is not None:
+                context._force_start_method(self._start_method)
+            _process_counter = itertools.count(1)
+            _children = set()
+            util._close_stdin()
+            old_process = _current_process
+            _current_process = self
+            _parent_process = _ParentProcess(
+                self._parent_name, self._parent_pid, parent_sentinel)
+            if threading._HAVE_THREAD_NATIVE_ID:
+                threading.main_thread()._set_native_id()
+            try:
+                self._after_fork()
+            finally:
+                # delay finalization of the old process object until after
+                # _run_after_forkers() is executed
+                del old_process
+            util.info('child process calling self.run()')
+            self.run()
+            exitcode = 0
+        except SystemExit as e:
+            if e.code is None:
+                exitcode = 0
+            elif isinstance(e.code, int):
+                exitcode = e.code
+            else:
+                sys.stderr.write(str(e.code) + '\n')
+                exitcode = 1
+        except:
+            exitcode = 1
+            import traceback
+            sys.stderr.write('Process %s:\n' % self.name)
+            traceback.print_exc()
+        finally:
+            threading._shutdown()
+            util.info('process exiting with exitcode %d' % exitcode)
+            util._flush_std_streams()
+
+        return exitcode
+
+    @staticmethod
+    def _after_fork():
+        from . import util
+        util._finalizer_registry.clear()
+        util._run_after_forkers()
+
+
+#
+# We subclass bytes to avoid accidental transmission of auth keys over network
+#
+
+class AuthenticationString(bytes):
+    def __reduce__(self):
+        from .context import get_spawning_popen
+        if get_spawning_popen() is None:
+            raise TypeError(
+                'Pickling an AuthenticationString object is '
+                'disallowed for security reasons'
+                )
+        return AuthenticationString, (bytes(self),)
+
+
+#
+# Create object representing the parent process
+#
+
+class _ParentProcess(BaseProcess):
+
+    def __init__(self, name, pid, sentinel):
+        self._identity = ()
+        self._name = name
+        self._pid = pid
+        self._parent_pid = None
+        self._popen = None
+        self._closed = False
+        self._sentinel = sentinel
+        self._config = {}
+
+    def is_alive(self):
+        from multiprocessing.connection import wait
+        return not wait([self._sentinel], timeout=0)
+
+    @property
+    def ident(self):
+        return self._pid
+
+    def join(self, timeout=None):
+        '''
+        Wait until parent process terminates
+        '''
+        from multiprocessing.connection import wait
+        wait([self._sentinel], timeout=timeout)
+
+    pid = ident
+
+#
+# Create object representing the main process
+#
+
+class _MainProcess(BaseProcess):
+
+    def __init__(self):
+        self._identity = ()
+        self._name = 'MainProcess'
+        self._parent_pid = None
+        self._popen = None
+        self._closed = False
+        self._config = {'authkey': AuthenticationString(os.urandom(32)),
+                        'semprefix': '/mp'}
+        # Note that some versions of FreeBSD only allow named
+        # semaphores to have names of up to 14 characters.  Therefore
+        # we choose a short prefix.
+        #
+        # On MacOSX in a sandbox it may be necessary to use a
+        # different prefix -- see #19478.
+        #
+        # Everything in self._config will be inherited by descendant
+        # processes.
+
+    def close(self):
+        pass
+
+
+_parent_process = None
+_current_process = _MainProcess()
+_process_counter = itertools.count(1)
+_children = set()
+del _MainProcess
+
+#
+# Give names to some return codes
+#
+
+_exitcode_to_name = {}
+
+for name, signum in list(signal.__dict__.items()):
+    if name[:3]=='SIG' and '_' not in name:
+        _exitcode_to_name[-signum] = f'-{name}'
+del name, signum
+
+# For debug and leak testing
+_dangling = WeakSet()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/queues.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/queues.py
new file mode 100644
index 0000000000000000000000000000000000000000..981599acf5ef26e9bb4fb41b4a080511efdcc1a2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/queues.py
@@ -0,0 +1,399 @@
+#
+# Module implementing queues
+#
+# multiprocessing/queues.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = ['Queue', 'SimpleQueue', 'JoinableQueue']
+
+import sys
+import os
+import threading
+import collections
+import time
+import types
+import weakref
+import errno
+
+from queue import Empty, Full
+
+from . import connection
+from . import context
+_ForkingPickler = context.reduction.ForkingPickler
+
+from .util import debug, info, Finalize, register_after_fork, is_exiting
+
+#
+# Queue type using a pipe, buffer and thread
+#
+
+class Queue(object):
+
+    def __init__(self, maxsize=0, *, ctx):
+        if maxsize <= 0:
+            # Can raise ImportError (see issues #3770 and #23400)
+            from .synchronize import SEM_VALUE_MAX as maxsize
+        self._maxsize = maxsize
+        self._reader, self._writer = connection.Pipe(duplex=False)
+        self._rlock = ctx.Lock()
+        self._opid = os.getpid()
+        if sys.platform == 'win32':
+            self._wlock = None
+        else:
+            self._wlock = ctx.Lock()
+        self._sem = ctx.BoundedSemaphore(maxsize)
+        # For use by concurrent.futures
+        self._ignore_epipe = False
+        self._reset()
+
+        if sys.platform != 'win32':
+            register_after_fork(self, Queue._after_fork)
+
+    def __getstate__(self):
+        context.assert_spawning(self)
+        return (self._ignore_epipe, self._maxsize, self._reader, self._writer,
+                self._rlock, self._wlock, self._sem, self._opid)
+
+    def __setstate__(self, state):
+        (self._ignore_epipe, self._maxsize, self._reader, self._writer,
+         self._rlock, self._wlock, self._sem, self._opid) = state
+        self._reset()
+
+    def _after_fork(self):
+        debug('Queue._after_fork()')
+        self._reset(after_fork=True)
+
+    def _reset(self, after_fork=False):
+        if after_fork:
+            self._notempty._at_fork_reinit()
+        else:
+            self._notempty = threading.Condition(threading.Lock())
+        self._buffer = collections.deque()
+        self._thread = None
+        self._jointhread = None
+        self._joincancelled = False
+        self._closed = False
+        self._close = None
+        self._send_bytes = self._writer.send_bytes
+        self._recv_bytes = self._reader.recv_bytes
+        self._poll = self._reader.poll
+
+    def put(self, obj, block=True, timeout=None):
+        if self._closed:
+            raise ValueError(f"Queue {self!r} is closed")
+        if not self._sem.acquire(block, timeout):
+            raise Full
+
+        with self._notempty:
+            if self._thread is None:
+                self._start_thread()
+            self._buffer.append(obj)
+            self._notempty.notify()
+
+    def get(self, block=True, timeout=None):
+        if self._closed:
+            raise ValueError(f"Queue {self!r} is closed")
+        if block and timeout is None:
+            with self._rlock:
+                res = self._recv_bytes()
+            self._sem.release()
+        else:
+            if block:
+                deadline = time.monotonic() + timeout
+            if not self._rlock.acquire(block, timeout):
+                raise Empty
+            try:
+                if block:
+                    timeout = deadline - time.monotonic()
+                    if not self._poll(timeout):
+                        raise Empty
+                elif not self._poll():
+                    raise Empty
+                res = self._recv_bytes()
+                self._sem.release()
+            finally:
+                self._rlock.release()
+        # unserialize the data after having released the lock
+        return _ForkingPickler.loads(res)
+
+    def qsize(self):
+        # Raises NotImplementedError on Mac OSX because of broken sem_getvalue()
+        return self._maxsize - self._sem.get_value()
+
+    def empty(self):
+        return not self._poll()
+
+    def full(self):
+        return self._sem._semlock._is_zero()
+
+    def get_nowait(self):
+        return self.get(False)
+
+    def put_nowait(self, obj):
+        return self.put(obj, False)
+
+    def close(self):
+        self._closed = True
+        close = self._close
+        if close:
+            self._close = None
+            close()
+
+    def join_thread(self):
+        debug('Queue.join_thread()')
+        assert self._closed, "Queue {0!r} not closed".format(self)
+        if self._jointhread:
+            self._jointhread()
+
+    def cancel_join_thread(self):
+        debug('Queue.cancel_join_thread()')
+        self._joincancelled = True
+        try:
+            self._jointhread.cancel()
+        except AttributeError:
+            pass
+
+    def _terminate_broken(self):
+        # Close a Queue on error.
+
+        # gh-94777: Prevent queue writing to a pipe which is no longer read.
+        self._reader.close()
+
+        # gh-107219: Close the connection writer which can unblock
+        # Queue._feed() if it was stuck in send_bytes().
+        if sys.platform == 'win32':
+            self._writer.close()
+
+        self.close()
+        self.join_thread()
+
+    def _start_thread(self):
+        debug('Queue._start_thread()')
+
+        # Start thread which transfers data from buffer to pipe
+        self._buffer.clear()
+        self._thread = threading.Thread(
+            target=Queue._feed,
+            args=(self._buffer, self._notempty, self._send_bytes,
+                  self._wlock, self._reader.close, self._writer.close,
+                  self._ignore_epipe, self._on_queue_feeder_error,
+                  self._sem),
+            name='QueueFeederThread',
+            daemon=True,
+        )
+
+        try:
+            debug('doing self._thread.start()')
+            self._thread.start()
+            debug('... done self._thread.start()')
+        except:
+            # gh-109047: During Python finalization, creating a thread
+            # can fail with RuntimeError.
+            self._thread = None
+            raise
+
+        if not self._joincancelled:
+            self._jointhread = Finalize(
+                self._thread, Queue._finalize_join,
+                [weakref.ref(self._thread)],
+                exitpriority=-5
+                )
+
+        # Send sentinel to the thread queue object when garbage collected
+        self._close = Finalize(
+            self, Queue._finalize_close,
+            [self._buffer, self._notempty],
+            exitpriority=10
+            )
+
+    @staticmethod
+    def _finalize_join(twr):
+        debug('joining queue thread')
+        thread = twr()
+        if thread is not None:
+            thread.join()
+            debug('... queue thread joined')
+        else:
+            debug('... queue thread already dead')
+
+    @staticmethod
+    def _finalize_close(buffer, notempty):
+        debug('telling queue thread to quit')
+        with notempty:
+            buffer.append(_sentinel)
+            notempty.notify()
+
+    @staticmethod
+    def _feed(buffer, notempty, send_bytes, writelock, reader_close,
+              writer_close, ignore_epipe, onerror, queue_sem):
+        debug('starting thread to feed data to pipe')
+        nacquire = notempty.acquire
+        nrelease = notempty.release
+        nwait = notempty.wait
+        bpopleft = buffer.popleft
+        sentinel = _sentinel
+        if sys.platform != 'win32':
+            wacquire = writelock.acquire
+            wrelease = writelock.release
+        else:
+            wacquire = None
+
+        while 1:
+            try:
+                nacquire()
+                try:
+                    if not buffer:
+                        nwait()
+                finally:
+                    nrelease()
+                try:
+                    while 1:
+                        obj = bpopleft()
+                        if obj is sentinel:
+                            debug('feeder thread got sentinel -- exiting')
+                            reader_close()
+                            writer_close()
+                            return
+
+                        # serialize the data before acquiring the lock
+                        obj = _ForkingPickler.dumps(obj)
+                        if wacquire is None:
+                            send_bytes(obj)
+                        else:
+                            wacquire()
+                            try:
+                                send_bytes(obj)
+                            finally:
+                                wrelease()
+                except IndexError:
+                    pass
+            except Exception as e:
+                if ignore_epipe and getattr(e, 'errno', 0) == errno.EPIPE:
+                    return
+                # Since this runs in a daemon thread the resources it uses
+                # may be become unusable while the process is cleaning up.
+                # We ignore errors which happen after the process has
+                # started to cleanup.
+                if is_exiting():
+                    info('error in queue thread: %s', e)
+                    return
+                else:
+                    # Since the object has not been sent in the queue, we need
+                    # to decrease the size of the queue. The error acts as
+                    # if the object had been silently removed from the queue
+                    # and this step is necessary to have a properly working
+                    # queue.
+                    queue_sem.release()
+                    onerror(e, obj)
+
+    @staticmethod
+    def _on_queue_feeder_error(e, obj):
+        """
+        Private API hook called when feeding data in the background thread
+        raises an exception.  For overriding by concurrent.futures.
+        """
+        import traceback
+        traceback.print_exc()
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+_sentinel = object()
+
+#
+# A queue type which also supports join() and task_done() methods
+#
+# Note that if you do not call task_done() for each finished task then
+# eventually the counter's semaphore may overflow causing Bad Things
+# to happen.
+#
+
+class JoinableQueue(Queue):
+
+    def __init__(self, maxsize=0, *, ctx):
+        Queue.__init__(self, maxsize, ctx=ctx)
+        self._unfinished_tasks = ctx.Semaphore(0)
+        self._cond = ctx.Condition()
+
+    def __getstate__(self):
+        return Queue.__getstate__(self) + (self._cond, self._unfinished_tasks)
+
+    def __setstate__(self, state):
+        Queue.__setstate__(self, state[:-2])
+        self._cond, self._unfinished_tasks = state[-2:]
+
+    def put(self, obj, block=True, timeout=None):
+        if self._closed:
+            raise ValueError(f"Queue {self!r} is closed")
+        if not self._sem.acquire(block, timeout):
+            raise Full
+
+        with self._notempty, self._cond:
+            if self._thread is None:
+                self._start_thread()
+            self._buffer.append(obj)
+            self._unfinished_tasks.release()
+            self._notempty.notify()
+
+    def task_done(self):
+        with self._cond:
+            if not self._unfinished_tasks.acquire(False):
+                raise ValueError('task_done() called too many times')
+            if self._unfinished_tasks._semlock._is_zero():
+                self._cond.notify_all()
+
+    def join(self):
+        with self._cond:
+            if not self._unfinished_tasks._semlock._is_zero():
+                self._cond.wait()
+
+#
+# Simplified Queue type -- really just a locked pipe
+#
+
+class SimpleQueue(object):
+
+    def __init__(self, *, ctx):
+        self._reader, self._writer = connection.Pipe(duplex=False)
+        self._rlock = ctx.Lock()
+        self._poll = self._reader.poll
+        if sys.platform == 'win32':
+            self._wlock = None
+        else:
+            self._wlock = ctx.Lock()
+
+    def close(self):
+        self._reader.close()
+        self._writer.close()
+
+    def empty(self):
+        return not self._poll()
+
+    def __getstate__(self):
+        context.assert_spawning(self)
+        return (self._reader, self._writer, self._rlock, self._wlock)
+
+    def __setstate__(self, state):
+        (self._reader, self._writer, self._rlock, self._wlock) = state
+        self._poll = self._reader.poll
+
+    def get(self):
+        with self._rlock:
+            res = self._reader.recv_bytes()
+        # unserialize the data after having released the lock
+        return _ForkingPickler.loads(res)
+
+    def put(self, obj):
+        # serialize the data before acquiring the lock
+        obj = _ForkingPickler.dumps(obj)
+        if self._wlock is None:
+            # writes to a message oriented win32 pipe are atomic
+            self._writer.send_bytes(obj)
+        else:
+            with self._wlock:
+                self._writer.send_bytes(obj)
+
+    __class_getitem__ = classmethod(types.GenericAlias)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/reduction.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/reduction.py
new file mode 100644
index 0000000000000000000000000000000000000000..fcccd3eef86cc7e8cbde463ffb132c1450fe9ea3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/reduction.py
@@ -0,0 +1,281 @@
+#
+# Module which deals with pickling of objects.
+#
+# multiprocessing/reduction.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+from abc import ABCMeta
+import copyreg
+import functools
+import io
+import os
+import pickle
+import socket
+import sys
+
+from . import context
+
+__all__ = ['send_handle', 'recv_handle', 'ForkingPickler', 'register', 'dump']
+
+
+HAVE_SEND_HANDLE = (sys.platform == 'win32' or
+                    (hasattr(socket, 'CMSG_LEN') and
+                     hasattr(socket, 'SCM_RIGHTS') and
+                     hasattr(socket.socket, 'sendmsg')))
+
+#
+# Pickler subclass
+#
+
+class ForkingPickler(pickle.Pickler):
+    '''Pickler subclass used by multiprocessing.'''
+    _extra_reducers = {}
+    _copyreg_dispatch_table = copyreg.dispatch_table
+
+    def __init__(self, *args):
+        super().__init__(*args)
+        self.dispatch_table = self._copyreg_dispatch_table.copy()
+        self.dispatch_table.update(self._extra_reducers)
+
+    @classmethod
+    def register(cls, type, reduce):
+        '''Register a reduce function for a type.'''
+        cls._extra_reducers[type] = reduce
+
+    @classmethod
+    def dumps(cls, obj, protocol=None):
+        buf = io.BytesIO()
+        cls(buf, protocol).dump(obj)
+        return buf.getbuffer()
+
+    loads = pickle.loads
+
+register = ForkingPickler.register
+
+def dump(obj, file, protocol=None):
+    '''Replacement for pickle.dump() using ForkingPickler.'''
+    ForkingPickler(file, protocol).dump(obj)
+
+#
+# Platform specific definitions
+#
+
+if sys.platform == 'win32':
+    # Windows
+    __all__ += ['DupHandle', 'duplicate', 'steal_handle']
+    import _winapi
+
+    def duplicate(handle, target_process=None, inheritable=False,
+                  *, source_process=None):
+        '''Duplicate a handle.  (target_process is a handle not a pid!)'''
+        current_process = _winapi.GetCurrentProcess()
+        if source_process is None:
+            source_process = current_process
+        if target_process is None:
+            target_process = current_process
+        return _winapi.DuplicateHandle(
+            source_process, handle, target_process,
+            0, inheritable, _winapi.DUPLICATE_SAME_ACCESS)
+
+    def steal_handle(source_pid, handle):
+        '''Steal a handle from process identified by source_pid.'''
+        source_process_handle = _winapi.OpenProcess(
+            _winapi.PROCESS_DUP_HANDLE, False, source_pid)
+        try:
+            return _winapi.DuplicateHandle(
+                source_process_handle, handle,
+                _winapi.GetCurrentProcess(), 0, False,
+                _winapi.DUPLICATE_SAME_ACCESS | _winapi.DUPLICATE_CLOSE_SOURCE)
+        finally:
+            _winapi.CloseHandle(source_process_handle)
+
+    def send_handle(conn, handle, destination_pid):
+        '''Send a handle over a local connection.'''
+        dh = DupHandle(handle, _winapi.DUPLICATE_SAME_ACCESS, destination_pid)
+        conn.send(dh)
+
+    def recv_handle(conn):
+        '''Receive a handle over a local connection.'''
+        return conn.recv().detach()
+
+    class DupHandle(object):
+        '''Picklable wrapper for a handle.'''
+        def __init__(self, handle, access, pid=None):
+            if pid is None:
+                # We just duplicate the handle in the current process and
+                # let the receiving process steal the handle.
+                pid = os.getpid()
+            proc = _winapi.OpenProcess(_winapi.PROCESS_DUP_HANDLE, False, pid)
+            try:
+                self._handle = _winapi.DuplicateHandle(
+                    _winapi.GetCurrentProcess(),
+                    handle, proc, access, False, 0)
+            finally:
+                _winapi.CloseHandle(proc)
+            self._access = access
+            self._pid = pid
+
+        def detach(self):
+            '''Get the handle.  This should only be called once.'''
+            # retrieve handle from process which currently owns it
+            if self._pid == os.getpid():
+                # The handle has already been duplicated for this process.
+                return self._handle
+            # We must steal the handle from the process whose pid is self._pid.
+            proc = _winapi.OpenProcess(_winapi.PROCESS_DUP_HANDLE, False,
+                                       self._pid)
+            try:
+                return _winapi.DuplicateHandle(
+                    proc, self._handle, _winapi.GetCurrentProcess(),
+                    self._access, False, _winapi.DUPLICATE_CLOSE_SOURCE)
+            finally:
+                _winapi.CloseHandle(proc)
+
+else:
+    # Unix
+    __all__ += ['DupFd', 'sendfds', 'recvfds']
+    import array
+
+    def sendfds(sock, fds):
+        '''Send an array of fds over an AF_UNIX socket.'''
+        fds = array.array('i', fds)
+        msg = bytes([len(fds) % 256])
+        sock.sendmsg([msg], [(socket.SOL_SOCKET, socket.SCM_RIGHTS, fds)])
+        if sock.recv(1) != b'A':
+            raise RuntimeError('did not receive acknowledgement of fd')
+
+    def recvfds(sock, size):
+        '''Receive an array of fds over an AF_UNIX socket.'''
+        a = array.array('i')
+        bytes_size = a.itemsize * size
+        msg, ancdata, flags, addr = sock.recvmsg(1, socket.CMSG_SPACE(bytes_size))
+        if not msg and not ancdata:
+            raise EOFError
+        try:
+            # We send/recv an Ack byte after the fds to work around an old
+            # macOS bug; it isn't clear if this is still required but it
+            # makes unit testing fd sending easier.
+            # See: https://github.com/python/cpython/issues/58874
+            sock.send(b'A')  # Acknowledge
+            if len(ancdata) != 1:
+                raise RuntimeError('received %d items of ancdata' %
+                                   len(ancdata))
+            cmsg_level, cmsg_type, cmsg_data = ancdata[0]
+            if (cmsg_level == socket.SOL_SOCKET and
+                cmsg_type == socket.SCM_RIGHTS):
+                if len(cmsg_data) % a.itemsize != 0:
+                    raise ValueError
+                a.frombytes(cmsg_data)
+                if len(a) % 256 != msg[0]:
+                    raise AssertionError(
+                        "Len is {0:n} but msg[0] is {1!r}".format(
+                            len(a), msg[0]))
+                return list(a)
+        except (ValueError, IndexError):
+            pass
+        raise RuntimeError('Invalid data received')
+
+    def send_handle(conn, handle, destination_pid):
+        '''Send a handle over a local connection.'''
+        with socket.fromfd(conn.fileno(), socket.AF_UNIX, socket.SOCK_STREAM) as s:
+            sendfds(s, [handle])
+
+    def recv_handle(conn):
+        '''Receive a handle over a local connection.'''
+        with socket.fromfd(conn.fileno(), socket.AF_UNIX, socket.SOCK_STREAM) as s:
+            return recvfds(s, 1)[0]
+
+    def DupFd(fd):
+        '''Return a wrapper for an fd.'''
+        popen_obj = context.get_spawning_popen()
+        if popen_obj is not None:
+            return popen_obj.DupFd(popen_obj.duplicate_for_child(fd))
+        elif HAVE_SEND_HANDLE:
+            from . import resource_sharer
+            return resource_sharer.DupFd(fd)
+        else:
+            raise ValueError('SCM_RIGHTS appears not to be available')
+
+#
+# Try making some callable types picklable
+#
+
+def _reduce_method(m):
+    if m.__self__ is None:
+        return getattr, (m.__class__, m.__func__.__name__)
+    else:
+        return getattr, (m.__self__, m.__func__.__name__)
+class _C:
+    def f(self):
+        pass
+register(type(_C().f), _reduce_method)
+
+
+def _reduce_method_descriptor(m):
+    return getattr, (m.__objclass__, m.__name__)
+register(type(list.append), _reduce_method_descriptor)
+register(type(int.__add__), _reduce_method_descriptor)
+
+
+def _reduce_partial(p):
+    return _rebuild_partial, (p.func, p.args, p.keywords or {})
+def _rebuild_partial(func, args, keywords):
+    return functools.partial(func, *args, **keywords)
+register(functools.partial, _reduce_partial)
+
+#
+# Make sockets picklable
+#
+
+if sys.platform == 'win32':
+    def _reduce_socket(s):
+        from .resource_sharer import DupSocket
+        return _rebuild_socket, (DupSocket(s),)
+    def _rebuild_socket(ds):
+        return ds.detach()
+    register(socket.socket, _reduce_socket)
+
+else:
+    def _reduce_socket(s):
+        df = DupFd(s.fileno())
+        return _rebuild_socket, (df, s.family, s.type, s.proto)
+    def _rebuild_socket(df, family, type, proto):
+        fd = df.detach()
+        return socket.socket(family, type, proto, fileno=fd)
+    register(socket.socket, _reduce_socket)
+
+
+class AbstractReducer(metaclass=ABCMeta):
+    '''Abstract base class for use in implementing a Reduction class
+    suitable for use in replacing the standard reduction mechanism
+    used in multiprocessing.'''
+    ForkingPickler = ForkingPickler
+    register = register
+    dump = dump
+    send_handle = send_handle
+    recv_handle = recv_handle
+
+    if sys.platform == 'win32':
+        steal_handle = steal_handle
+        duplicate = duplicate
+        DupHandle = DupHandle
+    else:
+        sendfds = sendfds
+        recvfds = recvfds
+        DupFd = DupFd
+
+    _reduce_method = _reduce_method
+    _reduce_method_descriptor = _reduce_method_descriptor
+    _rebuild_partial = _rebuild_partial
+    _reduce_socket = _reduce_socket
+    _rebuild_socket = _rebuild_socket
+
+    def __init__(self, *args):
+        register(type(_C().f), _reduce_method)
+        register(type(list.append), _reduce_method_descriptor)
+        register(type(int.__add__), _reduce_method_descriptor)
+        register(functools.partial, _reduce_partial)
+        register(socket.socket, _reduce_socket)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_sharer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_sharer.py
new file mode 100644
index 0000000000000000000000000000000000000000..b8afb0fbed3a3c2c31d1c1a567a135c8d34c4e40
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_sharer.py
@@ -0,0 +1,154 @@
+#
+# We use a background thread for sharing fds on Unix, and for sharing sockets on
+# Windows.
+#
+# A client which wants to pickle a resource registers it with the resource
+# sharer and gets an identifier in return.  The unpickling process will connect
+# to the resource sharer, sends the identifier and its pid, and then receives
+# the resource.
+#
+
+import os
+import signal
+import socket
+import sys
+import threading
+
+from . import process
+from .context import reduction
+from . import util
+
+__all__ = ['stop']
+
+
+if sys.platform == 'win32':
+    __all__ += ['DupSocket']
+
+    class DupSocket(object):
+        '''Picklable wrapper for a socket.'''
+        def __init__(self, sock):
+            new_sock = sock.dup()
+            def send(conn, pid):
+                share = new_sock.share(pid)
+                conn.send_bytes(share)
+            self._id = _resource_sharer.register(send, new_sock.close)
+
+        def detach(self):
+            '''Get the socket.  This should only be called once.'''
+            with _resource_sharer.get_connection(self._id) as conn:
+                share = conn.recv_bytes()
+                return socket.fromshare(share)
+
+else:
+    __all__ += ['DupFd']
+
+    class DupFd(object):
+        '''Wrapper for fd which can be used at any time.'''
+        def __init__(self, fd):
+            new_fd = os.dup(fd)
+            def send(conn, pid):
+                reduction.send_handle(conn, new_fd, pid)
+            def close():
+                os.close(new_fd)
+            self._id = _resource_sharer.register(send, close)
+
+        def detach(self):
+            '''Get the fd.  This should only be called once.'''
+            with _resource_sharer.get_connection(self._id) as conn:
+                return reduction.recv_handle(conn)
+
+
+class _ResourceSharer(object):
+    '''Manager for resources using background thread.'''
+    def __init__(self):
+        self._key = 0
+        self._cache = {}
+        self._lock = threading.Lock()
+        self._listener = None
+        self._address = None
+        self._thread = None
+        util.register_after_fork(self, _ResourceSharer._afterfork)
+
+    def register(self, send, close):
+        '''Register resource, returning an identifier.'''
+        with self._lock:
+            if self._address is None:
+                self._start()
+            self._key += 1
+            self._cache[self._key] = (send, close)
+            return (self._address, self._key)
+
+    @staticmethod
+    def get_connection(ident):
+        '''Return connection from which to receive identified resource.'''
+        from .connection import Client
+        address, key = ident
+        c = Client(address, authkey=process.current_process().authkey)
+        c.send((key, os.getpid()))
+        return c
+
+    def stop(self, timeout=None):
+        '''Stop the background thread and clear registered resources.'''
+        from .connection import Client
+        with self._lock:
+            if self._address is not None:
+                c = Client(self._address,
+                           authkey=process.current_process().authkey)
+                c.send(None)
+                c.close()
+                self._thread.join(timeout)
+                if self._thread.is_alive():
+                    util.sub_warning('_ResourceSharer thread did '
+                                     'not stop when asked')
+                self._listener.close()
+                self._thread = None
+                self._address = None
+                self._listener = None
+                for key, (send, close) in self._cache.items():
+                    close()
+                self._cache.clear()
+
+    def _afterfork(self):
+        for key, (send, close) in self._cache.items():
+            close()
+        self._cache.clear()
+        self._lock._at_fork_reinit()
+        if self._listener is not None:
+            self._listener.close()
+        self._listener = None
+        self._address = None
+        self._thread = None
+
+    def _start(self):
+        from .connection import Listener
+        assert self._listener is None, "Already have Listener"
+        util.debug('starting listener and thread for sending handles')
+        self._listener = Listener(authkey=process.current_process().authkey, backlog=128)
+        self._address = self._listener.address
+        t = threading.Thread(target=self._serve)
+        t.daemon = True
+        t.start()
+        self._thread = t
+
+    def _serve(self):
+        if hasattr(signal, 'pthread_sigmask'):
+            signal.pthread_sigmask(signal.SIG_BLOCK, signal.valid_signals())
+        while 1:
+            try:
+                with self._listener.accept() as conn:
+                    msg = conn.recv()
+                    if msg is None:
+                        break
+                    key, destination_pid = msg
+                    send, close = self._cache.pop(key)
+                    try:
+                        send(conn, destination_pid)
+                    finally:
+                        close()
+            except:
+                if not util.is_exiting():
+                    sys.excepthook(*sys.exc_info())
+
+
+_resource_sharer = _ResourceSharer()
+stop = _resource_sharer.stop
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_tracker.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_tracker.py
new file mode 100644
index 0000000000000000000000000000000000000000..2ef2d1ece540d59a6be7818fb25253954dca91e9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/resource_tracker.py
@@ -0,0 +1,416 @@
+###############################################################################
+# Server process to keep track of unlinked resources (like shared memory
+# segments, semaphores etc.) and clean them.
+#
+# On Unix we run a server process which keeps track of unlinked
+# resources. The server ignores SIGINT and SIGTERM and reads from a
+# pipe.  Every other process of the program has a copy of the writable
+# end of the pipe, so we get EOF when all other processes have exited.
+# Then the server process unlinks any remaining resource names.
+#
+# This is important because there may be system limits for such resources: for
+# instance, the system only supports a limited number of named semaphores, and
+# shared-memory segments live in the RAM. If a python process leaks such a
+# resource, this resource will not be removed till the next reboot.  Without
+# this resource tracker process, "killall python" would probably leave unlinked
+# resources.
+
+import base64
+import os
+import signal
+import sys
+import threading
+import warnings
+from collections import deque
+
+import json
+
+from . import spawn
+from . import util
+
+__all__ = ['ensure_running', 'register', 'unregister']
+
+_HAVE_SIGMASK = hasattr(signal, 'pthread_sigmask')
+_IGNORED_SIGNALS = (signal.SIGINT, signal.SIGTERM)
+
+def cleanup_noop(name):
+    raise RuntimeError('noop should never be registered or cleaned up')
+
+_CLEANUP_FUNCS = {
+    'noop': cleanup_noop,
+    'dummy': lambda name: None,  # Dummy resource used in tests
+}
+
+if os.name == 'posix':
+    import _multiprocessing
+    import _posixshmem
+
+    # Use sem_unlink() to clean up named semaphores.
+    #
+    # sem_unlink() may be missing if the Python build process detected the
+    # absence of POSIX named semaphores. In that case, no named semaphores were
+    # ever opened, so no cleanup would be necessary.
+    if hasattr(_multiprocessing, 'sem_unlink'):
+        _CLEANUP_FUNCS['semaphore'] = _multiprocessing.sem_unlink
+    _CLEANUP_FUNCS['shared_memory'] = _posixshmem.shm_unlink
+
+
+class ReentrantCallError(RuntimeError):
+    pass
+
+
+class ResourceTracker(object):
+
+    def __init__(self):
+        self._lock = threading.RLock()
+        self._fd = None
+        self._pid = None
+        self._exitcode = None
+        self._reentrant_messages = deque()
+
+        # True to use colon-separated lines, rather than JSON lines,
+        # for internal communication. (Mainly for testing).
+        # Filenames not supported by the simple format will always be sent
+        # using JSON.
+        # The reader should understand all formats.
+        self._use_simple_format = True
+
+    def _reentrant_call_error(self):
+        # gh-109629: this happens if an explicit call to the ResourceTracker
+        # gets interrupted by a garbage collection, invoking a finalizer (*)
+        # that itself calls back into ResourceTracker.
+        #   (*) for example the SemLock finalizer
+        raise ReentrantCallError(
+            "Reentrant call into the multiprocessing resource tracker")
+
+    def __del__(self):
+        # making sure child processess are cleaned before ResourceTracker
+        # gets destructed.
+        # see https://github.com/python/cpython/issues/88887
+        self._stop(use_blocking_lock=False)
+
+    def _stop(self, use_blocking_lock=True):
+        if use_blocking_lock:
+            with self._lock:
+                self._stop_locked()
+        else:
+            acquired = self._lock.acquire(blocking=False)
+            try:
+                self._stop_locked()
+            finally:
+                if acquired:
+                    self._lock.release()
+
+    def _stop_locked(
+        self,
+        close=os.close,
+        waitpid=os.waitpid,
+        waitstatus_to_exitcode=os.waitstatus_to_exitcode,
+    ):
+        # This shouldn't happen (it might when called by a finalizer)
+        # so we check for it anyway.
+        if self._lock._recursion_count() > 1:
+            raise self._reentrant_call_error()
+        if self._fd is None:
+            # not running
+            return
+        if self._pid is None:
+            return
+
+        # closing the "alive" file descriptor stops main()
+        close(self._fd)
+        self._fd = None
+
+        try:
+            _, status = waitpid(self._pid, 0)
+        except ChildProcessError:
+            self._pid = None
+            self._exitcode = None
+            return
+
+        self._pid = None
+
+        try:
+            self._exitcode = waitstatus_to_exitcode(status)
+        except ValueError:
+            # os.waitstatus_to_exitcode may raise an exception for invalid values
+            self._exitcode = None
+
+    def getfd(self):
+        self.ensure_running()
+        return self._fd
+
+    def ensure_running(self):
+        '''Make sure that resource tracker process is running.
+
+        This can be run from any process.  Usually a child process will use
+        the resource created by its parent.'''
+        return self._ensure_running_and_write()
+
+    def _teardown_dead_process(self):
+        os.close(self._fd)
+
+        # Clean-up to avoid dangling processes.
+        try:
+            # _pid can be None if this process is a child from another
+            # python process, which has started the resource_tracker.
+            if self._pid is not None:
+                os.waitpid(self._pid, 0)
+        except ChildProcessError:
+            # The resource_tracker has already been terminated.
+            pass
+        self._fd = None
+        self._pid = None
+        self._exitcode = None
+
+        warnings.warn('resource_tracker: process died unexpectedly, '
+                      'relaunching.  Some resources might leak.')
+
+    def _launch(self):
+        fds_to_pass = []
+        try:
+            fds_to_pass.append(sys.stderr.fileno())
+        except Exception:
+            pass
+        r, w = os.pipe()
+        try:
+            fds_to_pass.append(r)
+            # process will out live us, so no need to wait on pid
+            exe = spawn.get_executable()
+            args = [
+                exe,
+                *util._args_from_interpreter_flags(),
+                '-c',
+                f'from multiprocessing.resource_tracker import main;main({r})',
+            ]
+            # bpo-33613: Register a signal mask that will block the signals.
+            # This signal mask will be inherited by the child that is going
+            # to be spawned and will protect the child from a race condition
+            # that can make the child die before it registers signal handlers
+            # for SIGINT and SIGTERM. The mask is unregistered after spawning
+            # the child.
+            prev_sigmask = None
+            try:
+                if _HAVE_SIGMASK:
+                    prev_sigmask = signal.pthread_sigmask(signal.SIG_BLOCK, _IGNORED_SIGNALS)
+                pid = util.spawnv_passfds(exe, args, fds_to_pass)
+            finally:
+                if prev_sigmask is not None:
+                    signal.pthread_sigmask(signal.SIG_SETMASK, prev_sigmask)
+        except:
+            os.close(w)
+            raise
+        else:
+            self._fd = w
+            self._pid = pid
+        finally:
+            os.close(r)
+
+    def _make_probe_message(self):
+        """Return a probe message."""
+        if self._use_simple_format:
+            return b'PROBE:0:noop\n'
+        return (
+            json.dumps(
+                {"cmd": "PROBE", "rtype": "noop"},
+                ensure_ascii=True,
+                separators=(",", ":"),
+            )
+            + "\n"
+        ).encode("ascii")
+
+    def _ensure_running_and_write(self, msg=None):
+        with self._lock:
+            if self._lock._recursion_count() > 1:
+                # The code below is certainly not reentrant-safe, so bail out
+                if msg is None:
+                    raise self._reentrant_call_error()
+                return self._reentrant_messages.append(msg)
+
+            if self._fd is not None:
+                # resource tracker was launched before, is it still running?
+                if msg is None:
+                    to_send = self._make_probe_message()
+                else:
+                    to_send = msg
+                try:
+                    self._write(to_send)
+                except OSError:
+                    self._teardown_dead_process()
+                    self._launch()
+
+                msg = None  # message was sent in probe
+            else:
+                self._launch()
+
+        while True:
+            try:
+                reentrant_msg = self._reentrant_messages.popleft()
+            except IndexError:
+                break
+            self._write(reentrant_msg)
+        if msg is not None:
+            self._write(msg)
+
+    def _check_alive(self):
+        '''Check that the pipe has not been closed by sending a probe.'''
+        try:
+            # We cannot use send here as it calls ensure_running, creating
+            # a cycle.
+            os.write(self._fd, self._make_probe_message())
+        except OSError:
+            return False
+        else:
+            return True
+
+    def register(self, name, rtype):
+        '''Register name of resource with resource tracker.'''
+        self._send('REGISTER', name, rtype)
+
+    def unregister(self, name, rtype):
+        '''Unregister name of resource with resource tracker.'''
+        self._send('UNREGISTER', name, rtype)
+
+    def _write(self, msg):
+        nbytes = os.write(self._fd, msg)
+        assert nbytes == len(msg), f"{nbytes=} != {len(msg)=}"
+
+    def _send(self, cmd, name, rtype):
+        if self._use_simple_format and '\n' not in name:
+            msg = f"{cmd}:{name}:{rtype}\n".encode("ascii")
+            if len(msg) > 512:
+                # posix guarantees that writes to a pipe of less than PIPE_BUF
+                # bytes are atomic, and that PIPE_BUF >= 512
+                raise ValueError('msg too long')
+            self._ensure_running_and_write(msg)
+            return
+
+        # POSIX guarantees that writes to a pipe of less than PIPE_BUF (512 on Linux)
+        # bytes are atomic. Therefore, we want the message to be shorter than 512 bytes.
+        # POSIX shm_open() and sem_open() require the name, including its leading slash,
+        # to be at most NAME_MAX bytes (255 on Linux)
+        # With json.dump(..., ensure_ascii=True) every non-ASCII byte becomes a 6-char
+        # escape like \uDC80.
+        # As we want the overall message to be kept atomic and therefore smaller than 512,
+        # we encode encode the raw name bytes with URL-safe Base64 - so a 255 long name
+        # will not exceed 340 bytes.
+        b = name.encode('utf-8', 'surrogateescape')
+        if len(b) > 255:
+            raise ValueError('shared memory name too long (max 255 bytes)')
+        b64 = base64.urlsafe_b64encode(b).decode('ascii')
+
+        payload = {"cmd": cmd, "rtype": rtype, "base64_name": b64}
+        msg = (json.dumps(payload, ensure_ascii=True, separators=(",", ":")) + "\n").encode("ascii")
+
+        # The entire JSON message is guaranteed < PIPE_BUF (512 bytes) by construction.
+        assert len(msg) <= 512, f"internal error: message too long ({len(msg)} bytes)"
+        assert msg.startswith(b'{')
+
+        self._ensure_running_and_write(msg)
+
+_resource_tracker = ResourceTracker()
+ensure_running = _resource_tracker.ensure_running
+register = _resource_tracker.register
+unregister = _resource_tracker.unregister
+getfd = _resource_tracker.getfd
+
+
+def _decode_message(line):
+    if line.startswith(b'{'):
+        try:
+            obj = json.loads(line.decode('ascii'))
+        except Exception as e:
+            raise ValueError("malformed resource_tracker message: %r" % (line,)) from e
+
+        cmd = obj["cmd"]
+        rtype = obj["rtype"]
+        b64  = obj.get("base64_name", "")
+
+        if not isinstance(cmd, str) or not isinstance(rtype, str) or not isinstance(b64, str):
+            raise ValueError("malformed resource_tracker fields: %r" % (obj,))
+
+        try:
+            name = base64.urlsafe_b64decode(b64).decode('utf-8', 'surrogateescape')
+        except ValueError as e:
+            raise ValueError("malformed resource_tracker base64_name: %r" % (b64,)) from e
+    else:
+        cmd, rest = line.strip().decode('ascii').split(':', maxsplit=1)
+        name, rtype = rest.rsplit(':', maxsplit=1)
+    return cmd, rtype, name
+
+
+def main(fd):
+    '''Run resource tracker.'''
+    # protect the process from ^C and "killall python" etc
+    signal.signal(signal.SIGINT, signal.SIG_IGN)
+    signal.signal(signal.SIGTERM, signal.SIG_IGN)
+    if _HAVE_SIGMASK:
+        signal.pthread_sigmask(signal.SIG_UNBLOCK, _IGNORED_SIGNALS)
+
+    for f in (sys.stdin, sys.stdout):
+        try:
+            f.close()
+        except Exception:
+            pass
+
+    cache = {rtype: set() for rtype in _CLEANUP_FUNCS.keys()}
+    exit_code = 0
+
+    try:
+        # keep track of registered/unregistered resources
+        with open(fd, 'rb') as f:
+            for line in f:
+                try:
+                    cmd, rtype, name = _decode_message(line)
+                    cleanup_func = _CLEANUP_FUNCS.get(rtype, None)
+                    if cleanup_func is None:
+                        raise ValueError(
+                            f'Cannot register {name} for automatic cleanup: '
+                            f'unknown resource type {rtype}')
+
+                    if cmd == 'REGISTER':
+                        cache[rtype].add(name)
+                    elif cmd == 'UNREGISTER':
+                        cache[rtype].remove(name)
+                    elif cmd == 'PROBE':
+                        pass
+                    else:
+                        raise RuntimeError('unrecognized command %r' % cmd)
+                except Exception:
+                    exit_code = 3
+                    try:
+                        sys.excepthook(*sys.exc_info())
+                    except:
+                        pass
+    finally:
+        # all processes have terminated; cleanup any remaining resources
+        for rtype, rtype_cache in cache.items():
+            if rtype_cache:
+                try:
+                    exit_code = 1
+                    if rtype == 'dummy':
+                        # The test 'dummy' resource is expected to leak.
+                        # We skip the warning (and *only* the warning) for it.
+                        pass
+                    else:
+                        warnings.warn(
+                            f'resource_tracker: There appear to be '
+                            f'{len(rtype_cache)} leaked {rtype} objects to '
+                            f'clean up at shutdown: {rtype_cache}'
+                        )
+                except Exception:
+                    pass
+            for name in rtype_cache:
+                # For some reason the process which created and registered this
+                # resource has failed to unregister it. Presumably it has
+                # died.  We therefore unlink it.
+                try:
+                    try:
+                        _CLEANUP_FUNCS[rtype](name)
+                    except Exception as e:
+                        exit_code = 2
+                        warnings.warn('resource_tracker: %r: %s' % (name, e))
+                finally:
+                    pass
+
+        sys.exit(exit_code)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/shared_memory.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/shared_memory.py
new file mode 100644
index 0000000000000000000000000000000000000000..99a8ce3320ad4ee9e6e47e8a3972116acb3de3d7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/shared_memory.py
@@ -0,0 +1,544 @@
+"""Provides shared memory for direct access across processes.
+
+The API of this package is currently provisional. Refer to the
+documentation for details.
+"""
+
+
+__all__ = [ 'SharedMemory', 'ShareableList' ]
+
+
+from functools import partial
+import mmap
+import os
+import errno
+import struct
+import secrets
+import types
+
+if os.name == "nt":
+    import _winapi
+    _USE_POSIX = False
+else:
+    import _posixshmem
+    _USE_POSIX = True
+
+from . import resource_tracker
+
+_O_CREX = os.O_CREAT | os.O_EXCL
+
+# FreeBSD (and perhaps other BSDs) limit names to 14 characters.
+_SHM_SAFE_NAME_LENGTH = 14
+
+# Shared memory block name prefix
+if _USE_POSIX:
+    _SHM_NAME_PREFIX = '/psm_'
+else:
+    _SHM_NAME_PREFIX = 'wnsm_'
+
+
+def _make_filename():
+    "Create a random filename for the shared memory object."
+    # number of random bytes to use for name
+    nbytes = (_SHM_SAFE_NAME_LENGTH - len(_SHM_NAME_PREFIX)) // 2
+    assert nbytes >= 2, '_SHM_NAME_PREFIX too long'
+    name = _SHM_NAME_PREFIX + secrets.token_hex(nbytes)
+    assert len(name) <= _SHM_SAFE_NAME_LENGTH
+    return name
+
+
+class SharedMemory:
+    """Creates a new shared memory block or attaches to an existing
+    shared memory block.
+
+    Every shared memory block is assigned a unique name.  This enables
+    one process to create a shared memory block with a particular name
+    so that a different process can attach to that same shared memory
+    block using that same name.
+
+    As a resource for sharing data across processes, shared memory blocks
+    may outlive the original process that created them.  When one process
+    no longer needs access to a shared memory block that might still be
+    needed by other processes, the close() method should be called.
+    When a shared memory block is no longer needed by any process, the
+    unlink() method should be called to ensure proper cleanup."""
+
+    # Defaults; enables close() and unlink() to run without errors.
+    _name = None
+    _fd = -1
+    _mmap = None
+    _buf = None
+    _flags = os.O_RDWR
+    _mode = 0o600
+    _prepend_leading_slash = True if _USE_POSIX else False
+    _track = True
+
+    def __init__(self, name=None, create=False, size=0, *, track=True):
+        if not size >= 0:
+            raise ValueError("'size' must be a positive integer")
+        if create:
+            self._flags = _O_CREX | os.O_RDWR
+            if size == 0:
+                raise ValueError("'size' must be a positive number different from zero")
+        if name is None and not self._flags & os.O_EXCL:
+            raise ValueError("'name' can only be None if create=True")
+
+        self._track = track
+        if _USE_POSIX:
+
+            # POSIX Shared Memory
+
+            if name is None:
+                while True:
+                    name = _make_filename()
+                    try:
+                        self._fd = _posixshmem.shm_open(
+                            name,
+                            self._flags,
+                            mode=self._mode
+                        )
+                    except FileExistsError:
+                        continue
+                    self._name = name
+                    break
+            else:
+                name = "/" + name if self._prepend_leading_slash else name
+                self._fd = _posixshmem.shm_open(
+                    name,
+                    self._flags,
+                    mode=self._mode
+                )
+                self._name = name
+            try:
+                if create and size:
+                    os.ftruncate(self._fd, size)
+                stats = os.fstat(self._fd)
+                size = stats.st_size
+                self._mmap = mmap.mmap(self._fd, size)
+            except OSError:
+                self.unlink()
+                raise
+            if self._track:
+                resource_tracker.register(self._name, "shared_memory")
+
+        else:
+
+            # Windows Named Shared Memory
+
+            if create:
+                while True:
+                    temp_name = _make_filename() if name is None else name
+                    # Create and reserve shared memory block with this name
+                    # until it can be attached to by mmap.
+                    h_map = _winapi.CreateFileMapping(
+                        _winapi.INVALID_HANDLE_VALUE,
+                        _winapi.NULL,
+                        _winapi.PAGE_READWRITE,
+                        (size >> 32) & 0xFFFFFFFF,
+                        size & 0xFFFFFFFF,
+                        temp_name
+                    )
+                    try:
+                        last_error_code = _winapi.GetLastError()
+                        if last_error_code == _winapi.ERROR_ALREADY_EXISTS:
+                            if name is not None:
+                                raise FileExistsError(
+                                    errno.EEXIST,
+                                    os.strerror(errno.EEXIST),
+                                    name,
+                                    _winapi.ERROR_ALREADY_EXISTS
+                                )
+                            else:
+                                continue
+                        self._mmap = mmap.mmap(-1, size, tagname=temp_name)
+                    finally:
+                        _winapi.CloseHandle(h_map)
+                    self._name = temp_name
+                    break
+
+            else:
+                self._name = name
+                # Dynamically determine the existing named shared memory
+                # block's size which is likely a multiple of mmap.PAGESIZE.
+                h_map = _winapi.OpenFileMapping(
+                    _winapi.FILE_MAP_READ,
+                    False,
+                    name
+                )
+                try:
+                    p_buf = _winapi.MapViewOfFile(
+                        h_map,
+                        _winapi.FILE_MAP_READ,
+                        0,
+                        0,
+                        0
+                    )
+                finally:
+                    _winapi.CloseHandle(h_map)
+                try:
+                    size = _winapi.VirtualQuerySize(p_buf)
+                finally:
+                    _winapi.UnmapViewOfFile(p_buf)
+                self._mmap = mmap.mmap(-1, size, tagname=name)
+
+        self._size = size
+        self._buf = memoryview(self._mmap)
+
+    def __del__(self):
+        try:
+            self.close()
+        except OSError:
+            pass
+
+    def __reduce__(self):
+        return (
+            self.__class__,
+            (
+                self.name,
+                False,
+                self.size,
+            ),
+        )
+
+    def __repr__(self):
+        return f'{self.__class__.__name__}({self.name!r}, size={self.size})'
+
+    @property
+    def buf(self):
+        "A memoryview of contents of the shared memory block."
+        return self._buf
+
+    @property
+    def name(self):
+        "Unique name that identifies the shared memory block."
+        reported_name = self._name
+        if _USE_POSIX and self._prepend_leading_slash:
+            if self._name.startswith("/"):
+                reported_name = self._name[1:]
+        return reported_name
+
+    @property
+    def size(self):
+        "Size in bytes."
+        return self._size
+
+    def close(self):
+        """Closes access to the shared memory from this instance but does
+        not destroy the shared memory block."""
+        if self._buf is not None:
+            self._buf.release()
+            self._buf = None
+        if self._mmap is not None:
+            self._mmap.close()
+            self._mmap = None
+        if _USE_POSIX and self._fd >= 0:
+            os.close(self._fd)
+            self._fd = -1
+
+    def unlink(self):
+        """Requests that the underlying shared memory block be destroyed.
+
+        Unlink should be called once (and only once) across all handles
+        which have access to the shared memory block, even if these
+        handles belong to different processes. Closing and unlinking may
+        happen in any order, but trying to access data inside a shared
+        memory block after unlinking may result in memory errors,
+        depending on platform.
+
+        This method has no effect on Windows, where the only way to
+        delete a shared memory block is to close all handles."""
+
+        if _USE_POSIX and self._name:
+            _posixshmem.shm_unlink(self._name)
+            if self._track:
+                resource_tracker.unregister(self._name, "shared_memory")
+
+
+_encoding = "utf8"
+
+class ShareableList:
+    """Pattern for a mutable list-like object shareable via a shared
+    memory block.  It differs from the built-in list type in that these
+    lists can not change their overall length (i.e. no append, insert,
+    etc.)
+
+    Because values are packed into a memoryview as bytes, the struct
+    packing format for any storable value must require no more than 8
+    characters to describe its format."""
+
+    # The shared memory area is organized as follows:
+    # - 8 bytes: number of items (N) as a 64-bit integer
+    # - (N + 1) * 8 bytes: offsets of each element from the start of the
+    #                      data area
+    # - K bytes: the data area storing item values (with encoding and size
+    #            depending on their respective types)
+    # - N * 8 bytes: `struct` format string for each element
+    # - N bytes: index into _back_transforms_mapping for each element
+    #            (for reconstructing the corresponding Python value)
+    _types_mapping = {
+        int: "q",
+        float: "d",
+        bool: "xxxxxxx?",
+        str: "%ds",
+        bytes: "%ds",
+        None.__class__: "xxxxxx?x",
+    }
+    _alignment = 8
+    _back_transforms_mapping = {
+        0: lambda value: value,                   # int, float, bool
+        1: lambda value: value.rstrip(b'\x00').decode(_encoding),  # str
+        2: lambda value: value.rstrip(b'\x00'),   # bytes
+        3: lambda _value: None,                   # None
+    }
+
+    @staticmethod
+    def _extract_recreation_code(value):
+        """Used in concert with _back_transforms_mapping to convert values
+        into the appropriate Python objects when retrieving them from
+        the list as well as when storing them."""
+        if not isinstance(value, (str, bytes, None.__class__)):
+            return 0
+        elif isinstance(value, str):
+            return 1
+        elif isinstance(value, bytes):
+            return 2
+        else:
+            return 3  # NoneType
+
+    def __init__(self, sequence=None, *, name=None):
+        if name is None or sequence is not None:
+            sequence = sequence or ()
+            _formats = [
+                self._types_mapping[type(item)]
+                    if not isinstance(item, (str, bytes))
+                    else self._types_mapping[type(item)] % (
+                        self._alignment * (len(item) // self._alignment + 1),
+                    )
+                for item in sequence
+            ]
+            self._list_len = len(_formats)
+            assert sum(len(fmt) <= 8 for fmt in _formats) == self._list_len
+            offset = 0
+            # The offsets of each list element into the shared memory's
+            # data area (0 meaning the start of the data area, not the start
+            # of the shared memory area).
+            self._allocated_offsets = [0]
+            for fmt in _formats:
+                offset += self._alignment if fmt[-1] != "s" else int(fmt[:-1])
+                self._allocated_offsets.append(offset)
+            _recreation_codes = [
+                self._extract_recreation_code(item) for item in sequence
+            ]
+            requested_size = struct.calcsize(
+                "q" + self._format_size_metainfo +
+                "".join(_formats) +
+                self._format_packing_metainfo +
+                self._format_back_transform_codes
+            )
+
+            self.shm = SharedMemory(name, create=True, size=requested_size)
+        else:
+            self.shm = SharedMemory(name)
+
+        if sequence is not None:
+            _enc = _encoding
+            struct.pack_into(
+                "q" + self._format_size_metainfo,
+                self.shm.buf,
+                0,
+                self._list_len,
+                *(self._allocated_offsets)
+            )
+            struct.pack_into(
+                "".join(_formats),
+                self.shm.buf,
+                self._offset_data_start,
+                *(v.encode(_enc) if isinstance(v, str) else v for v in sequence)
+            )
+            struct.pack_into(
+                self._format_packing_metainfo,
+                self.shm.buf,
+                self._offset_packing_formats,
+                *(v.encode(_enc) for v in _formats)
+            )
+            struct.pack_into(
+                self._format_back_transform_codes,
+                self.shm.buf,
+                self._offset_back_transform_codes,
+                *(_recreation_codes)
+            )
+
+        else:
+            self._list_len = len(self)  # Obtains size from offset 0 in buffer.
+            self._allocated_offsets = list(
+                struct.unpack_from(
+                    self._format_size_metainfo,
+                    self.shm.buf,
+                    1 * 8
+                )
+            )
+
+    def _get_packing_format(self, position):
+        "Gets the packing format for a single value stored in the list."
+        position = position if position >= 0 else position + self._list_len
+        if (position >= self._list_len) or (self._list_len < 0):
+            raise IndexError("Requested position out of range.")
+
+        v = struct.unpack_from(
+            "8s",
+            self.shm.buf,
+            self._offset_packing_formats + position * 8
+        )[0]
+        fmt = v.rstrip(b'\x00')
+        fmt_as_str = fmt.decode(_encoding)
+
+        return fmt_as_str
+
+    def _get_back_transform(self, position):
+        "Gets the back transformation function for a single value."
+
+        if (position >= self._list_len) or (self._list_len < 0):
+            raise IndexError("Requested position out of range.")
+
+        transform_code = struct.unpack_from(
+            "b",
+            self.shm.buf,
+            self._offset_back_transform_codes + position
+        )[0]
+        transform_function = self._back_transforms_mapping[transform_code]
+
+        return transform_function
+
+    def _set_packing_format_and_transform(self, position, fmt_as_str, value):
+        """Sets the packing format and back transformation code for a
+        single value in the list at the specified position."""
+
+        if (position >= self._list_len) or (self._list_len < 0):
+            raise IndexError("Requested position out of range.")
+
+        struct.pack_into(
+            "8s",
+            self.shm.buf,
+            self._offset_packing_formats + position * 8,
+            fmt_as_str.encode(_encoding)
+        )
+
+        transform_code = self._extract_recreation_code(value)
+        struct.pack_into(
+            "b",
+            self.shm.buf,
+            self._offset_back_transform_codes + position,
+            transform_code
+        )
+
+    def __getitem__(self, position):
+        position = position if position >= 0 else position + self._list_len
+        try:
+            offset = self._offset_data_start + self._allocated_offsets[position]
+            (v,) = struct.unpack_from(
+                self._get_packing_format(position),
+                self.shm.buf,
+                offset
+            )
+        except IndexError:
+            raise IndexError("index out of range")
+
+        back_transform = self._get_back_transform(position)
+        v = back_transform(v)
+
+        return v
+
+    def __setitem__(self, position, value):
+        position = position if position >= 0 else position + self._list_len
+        try:
+            item_offset = self._allocated_offsets[position]
+            offset = self._offset_data_start + item_offset
+            current_format = self._get_packing_format(position)
+        except IndexError:
+            raise IndexError("assignment index out of range")
+
+        if not isinstance(value, (str, bytes)):
+            new_format = self._types_mapping[type(value)]
+            encoded_value = value
+        else:
+            allocated_length = self._allocated_offsets[position + 1] - item_offset
+
+            encoded_value = (value.encode(_encoding)
+                             if isinstance(value, str) else value)
+            if len(encoded_value) > allocated_length:
+                raise ValueError("bytes/str item exceeds available storage")
+            if current_format[-1] == "s":
+                new_format = current_format
+            else:
+                new_format = self._types_mapping[str] % (
+                    allocated_length,
+                )
+
+        self._set_packing_format_and_transform(
+            position,
+            new_format,
+            value
+        )
+        struct.pack_into(new_format, self.shm.buf, offset, encoded_value)
+
+    def __reduce__(self):
+        return partial(self.__class__, name=self.shm.name), ()
+
+    def __len__(self):
+        return struct.unpack_from("q", self.shm.buf, 0)[0]
+
+    def __repr__(self):
+        return f'{self.__class__.__name__}({list(self)}, name={self.shm.name!r})'
+
+    @property
+    def format(self):
+        "The struct packing format used by all currently stored items."
+        return "".join(
+            self._get_packing_format(i) for i in range(self._list_len)
+        )
+
+    @property
+    def _format_size_metainfo(self):
+        "The struct packing format used for the items' storage offsets."
+        return "q" * (self._list_len + 1)
+
+    @property
+    def _format_packing_metainfo(self):
+        "The struct packing format used for the items' packing formats."
+        return "8s" * self._list_len
+
+    @property
+    def _format_back_transform_codes(self):
+        "The struct packing format used for the items' back transforms."
+        return "b" * self._list_len
+
+    @property
+    def _offset_data_start(self):
+        # - 8 bytes for the list length
+        # - (N + 1) * 8 bytes for the element offsets
+        return (self._list_len + 2) * 8
+
+    @property
+    def _offset_packing_formats(self):
+        return self._offset_data_start + self._allocated_offsets[-1]
+
+    @property
+    def _offset_back_transform_codes(self):
+        return self._offset_packing_formats + self._list_len * 8
+
+    def count(self, value):
+        "L.count(value) -> integer -- return number of occurrences of value."
+
+        return sum(value == entry for entry in self)
+
+    def index(self, value):
+        """L.index(value) -> integer -- return first index of value.
+        Raises ValueError if the value is not present."""
+
+        for position, entry in enumerate(self):
+            if value == entry:
+                return position
+        else:
+            raise ValueError("ShareableList.index(x): x not in list")
+
+    __class_getitem__ = classmethod(types.GenericAlias)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/sharedctypes.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/sharedctypes.py
new file mode 100644
index 0000000000000000000000000000000000000000..6071707027bea46dccfc4d92fb3195060faf07ce
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/sharedctypes.py
@@ -0,0 +1,240 @@
+#
+# Module which supports allocation of ctypes objects from shared memory
+#
+# multiprocessing/sharedctypes.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+import ctypes
+import weakref
+
+from . import heap
+from . import get_context
+
+from .context import reduction, assert_spawning
+_ForkingPickler = reduction.ForkingPickler
+
+__all__ = ['RawValue', 'RawArray', 'Value', 'Array', 'copy', 'synchronized']
+
+#
+#
+#
+
+typecode_to_type = {
+    'c': ctypes.c_char,     'u': ctypes.c_wchar,
+    'b': ctypes.c_byte,     'B': ctypes.c_ubyte,
+    'h': ctypes.c_short,    'H': ctypes.c_ushort,
+    'i': ctypes.c_int,      'I': ctypes.c_uint,
+    'l': ctypes.c_long,     'L': ctypes.c_ulong,
+    'q': ctypes.c_longlong, 'Q': ctypes.c_ulonglong,
+    'f': ctypes.c_float,    'd': ctypes.c_double
+    }
+
+#
+#
+#
+
+def _new_value(type_):
+    size = ctypes.sizeof(type_)
+    wrapper = heap.BufferWrapper(size)
+    return rebuild_ctype(type_, wrapper, None)
+
+def RawValue(typecode_or_type, *args):
+    '''
+    Returns a ctypes object allocated from shared memory
+    '''
+    type_ = typecode_to_type.get(typecode_or_type, typecode_or_type)
+    obj = _new_value(type_)
+    ctypes.memset(ctypes.addressof(obj), 0, ctypes.sizeof(obj))
+    obj.__init__(*args)
+    return obj
+
+def RawArray(typecode_or_type, size_or_initializer):
+    '''
+    Returns a ctypes array allocated from shared memory
+    '''
+    type_ = typecode_to_type.get(typecode_or_type, typecode_or_type)
+    if isinstance(size_or_initializer, int):
+        type_ = type_ * size_or_initializer
+        obj = _new_value(type_)
+        ctypes.memset(ctypes.addressof(obj), 0, ctypes.sizeof(obj))
+        return obj
+    else:
+        type_ = type_ * len(size_or_initializer)
+        result = _new_value(type_)
+        result.__init__(*size_or_initializer)
+        return result
+
+def Value(typecode_or_type, *args, lock=True, ctx=None):
+    '''
+    Return a synchronization wrapper for a Value
+    '''
+    obj = RawValue(typecode_or_type, *args)
+    if lock is False:
+        return obj
+    if lock in (True, None):
+        ctx = ctx or get_context()
+        lock = ctx.RLock()
+    if not hasattr(lock, 'acquire'):
+        raise AttributeError("%r has no method 'acquire'" % lock)
+    return synchronized(obj, lock, ctx=ctx)
+
+def Array(typecode_or_type, size_or_initializer, *, lock=True, ctx=None):
+    '''
+    Return a synchronization wrapper for a RawArray
+    '''
+    obj = RawArray(typecode_or_type, size_or_initializer)
+    if lock is False:
+        return obj
+    if lock in (True, None):
+        ctx = ctx or get_context()
+        lock = ctx.RLock()
+    if not hasattr(lock, 'acquire'):
+        raise AttributeError("%r has no method 'acquire'" % lock)
+    return synchronized(obj, lock, ctx=ctx)
+
+def copy(obj):
+    new_obj = _new_value(type(obj))
+    ctypes.pointer(new_obj)[0] = obj
+    return new_obj
+
+def synchronized(obj, lock=None, ctx=None):
+    assert not isinstance(obj, SynchronizedBase), 'object already synchronized'
+    ctx = ctx or get_context()
+
+    if isinstance(obj, ctypes._SimpleCData):
+        return Synchronized(obj, lock, ctx)
+    elif isinstance(obj, ctypes.Array):
+        if obj._type_ is ctypes.c_char:
+            return SynchronizedString(obj, lock, ctx)
+        return SynchronizedArray(obj, lock, ctx)
+    else:
+        cls = type(obj)
+        try:
+            scls = class_cache[cls]
+        except KeyError:
+            names = [field[0] for field in cls._fields_]
+            d = {name: make_property(name) for name in names}
+            classname = 'Synchronized' + cls.__name__
+            scls = class_cache[cls] = type(classname, (SynchronizedBase,), d)
+        return scls(obj, lock, ctx)
+
+#
+# Functions for pickling/unpickling
+#
+
+def reduce_ctype(obj):
+    assert_spawning(obj)
+    if isinstance(obj, ctypes.Array):
+        return rebuild_ctype, (obj._type_, obj._wrapper, obj._length_)
+    else:
+        return rebuild_ctype, (type(obj), obj._wrapper, None)
+
+def rebuild_ctype(type_, wrapper, length):
+    if length is not None:
+        type_ = type_ * length
+    _ForkingPickler.register(type_, reduce_ctype)
+    buf = wrapper.create_memoryview()
+    obj = type_.from_buffer(buf)
+    obj._wrapper = wrapper
+    return obj
+
+#
+# Function to create properties
+#
+
+def make_property(name):
+    try:
+        return prop_cache[name]
+    except KeyError:
+        d = {}
+        exec(template % ((name,)*7), d)
+        prop_cache[name] = d[name]
+        return d[name]
+
+template = '''
+def get%s(self):
+    self.acquire()
+    try:
+        return self._obj.%s
+    finally:
+        self.release()
+def set%s(self, value):
+    self.acquire()
+    try:
+        self._obj.%s = value
+    finally:
+        self.release()
+%s = property(get%s, set%s)
+'''
+
+prop_cache = {}
+class_cache = weakref.WeakKeyDictionary()
+
+#
+# Synchronized wrappers
+#
+
+class SynchronizedBase(object):
+
+    def __init__(self, obj, lock=None, ctx=None):
+        self._obj = obj
+        if lock:
+            self._lock = lock
+        else:
+            ctx = ctx or get_context(force=True)
+            self._lock = ctx.RLock()
+        self.acquire = self._lock.acquire
+        self.release = self._lock.release
+
+    def __enter__(self):
+        return self._lock.__enter__()
+
+    def __exit__(self, *args):
+        return self._lock.__exit__(*args)
+
+    def __reduce__(self):
+        assert_spawning(self)
+        return synchronized, (self._obj, self._lock)
+
+    def get_obj(self):
+        return self._obj
+
+    def get_lock(self):
+        return self._lock
+
+    def __repr__(self):
+        return '<%s wrapper for %s>' % (type(self).__name__, self._obj)
+
+
+class Synchronized(SynchronizedBase):
+    value = make_property('value')
+
+
+class SynchronizedArray(SynchronizedBase):
+
+    def __len__(self):
+        return len(self._obj)
+
+    def __getitem__(self, i):
+        with self:
+            return self._obj[i]
+
+    def __setitem__(self, i, value):
+        with self:
+            self._obj[i] = value
+
+    def __getslice__(self, start, stop):
+        with self:
+            return self._obj[start:stop]
+
+    def __setslice__(self, start, stop, values):
+        with self:
+            self._obj[start:stop] = values
+
+
+class SynchronizedString(SynchronizedArray):
+    value = make_property('value')
+    raw = make_property('raw')
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/spawn.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/spawn.py
new file mode 100644
index 0000000000000000000000000000000000000000..d43864c939cb63faae44ef68c9d6f9d30dc0dbe0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/spawn.py
@@ -0,0 +1,307 @@
+#
+# Code used to start processes when using the spawn or forkserver
+# start methods.
+#
+# multiprocessing/spawn.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+import os
+import sys
+import runpy
+import types
+
+from . import get_start_method, set_start_method
+from . import process
+from .context import reduction
+from . import util
+
+__all__ = ['_main', 'freeze_support', 'set_executable', 'get_executable',
+           'get_preparation_data', 'get_command_line', 'import_main_path']
+
+#
+# _python_exe is the assumed path to the python executable.
+# People embedding Python want to modify it.
+#
+
+if sys.platform != 'win32':
+    WINEXE = False
+    WINSERVICE = False
+else:
+    WINEXE = getattr(sys, 'frozen', False)
+    WINSERVICE = sys.executable and sys.executable.lower().endswith("pythonservice.exe")
+
+def set_executable(exe):
+    global _python_exe
+    if exe is None:
+        _python_exe = exe
+    elif sys.platform == 'win32':
+        _python_exe = os.fsdecode(exe)
+    else:
+        _python_exe = os.fsencode(exe)
+
+def get_executable():
+    return _python_exe
+
+if WINSERVICE:
+    set_executable(os.path.join(sys.exec_prefix, 'python.exe'))
+else:
+    set_executable(sys.executable)
+
+#
+#
+#
+
+def is_forking(argv):
+    '''
+    Return whether commandline indicates we are forking
+    '''
+    if len(argv) >= 2 and argv[1] == '--multiprocessing-fork':
+        return True
+    else:
+        return False
+
+
+def freeze_support():
+    '''
+    Run code for process object if this in not the main process
+    '''
+    if is_forking(sys.argv):
+        kwds = {}
+        for arg in sys.argv[2:]:
+            name, value = arg.split('=')
+            if value == 'None':
+                kwds[name] = None
+            else:
+                kwds[name] = int(value)
+        spawn_main(**kwds)
+        sys.exit()
+
+
+def get_command_line(**kwds):
+    '''
+    Returns prefix of command line used for spawning a child process
+    '''
+    if getattr(sys, 'frozen', False):
+        return ([sys.executable, '--multiprocessing-fork'] +
+                ['%s=%r' % item for item in kwds.items()])
+    else:
+        prog = 'from multiprocessing.spawn import spawn_main; spawn_main(%s)'
+        prog %= ', '.join('%s=%r' % item for item in kwds.items())
+        opts = util._args_from_interpreter_flags()
+        exe = get_executable()
+        return [exe] + opts + ['-c', prog, '--multiprocessing-fork']
+
+
+def spawn_main(pipe_handle, parent_pid=None, tracker_fd=None):
+    '''
+    Run code specified by data received over pipe
+    '''
+    assert is_forking(sys.argv), "Not forking"
+    if sys.platform == 'win32':
+        import msvcrt
+        import _winapi
+
+        if parent_pid is not None:
+            source_process = _winapi.OpenProcess(
+                _winapi.SYNCHRONIZE | _winapi.PROCESS_DUP_HANDLE,
+                False, parent_pid)
+        else:
+            source_process = None
+        new_handle = reduction.duplicate(pipe_handle,
+                                         source_process=source_process)
+        fd = msvcrt.open_osfhandle(new_handle, os.O_RDONLY)
+        parent_sentinel = source_process
+    else:
+        from . import resource_tracker
+        resource_tracker._resource_tracker._fd = tracker_fd
+        fd = pipe_handle
+        parent_sentinel = os.dup(pipe_handle)
+    exitcode = _main(fd, parent_sentinel)
+    sys.exit(exitcode)
+
+
+def _main(fd, parent_sentinel):
+    with os.fdopen(fd, 'rb', closefd=True) as from_parent:
+        process.current_process()._inheriting = True
+        try:
+            preparation_data = reduction.pickle.load(from_parent)
+            prepare(preparation_data)
+            self = reduction.pickle.load(from_parent)
+        finally:
+            del process.current_process()._inheriting
+    return self._bootstrap(parent_sentinel)
+
+
+def _check_not_importing_main():
+    if getattr(process.current_process(), '_inheriting', False):
+        raise RuntimeError('''
+        An attempt has been made to start a new process before the
+        current process has finished its bootstrapping phase.
+
+        This probably means that you are not using fork to start your
+        child processes and you have forgotten to use the proper idiom
+        in the main module:
+
+            if __name__ == '__main__':
+                freeze_support()
+                ...
+
+        The "freeze_support()" line can be omitted if the program
+        is not going to be frozen to produce an executable.
+
+        To fix this issue, refer to the "Safe importing of main module"
+        section in https://docs.python.org/3/library/multiprocessing.html
+        ''')
+
+
+def get_preparation_data(name):
+    '''
+    Return info about parent needed by child to unpickle process object
+    '''
+    _check_not_importing_main()
+    d = dict(
+        log_to_stderr=util._log_to_stderr,
+        authkey=process.current_process().authkey,
+        )
+
+    if util._logger is not None:
+        d['log_level'] = util._logger.getEffectiveLevel()
+
+    sys_path=sys.path.copy()
+    try:
+        i = sys_path.index('')
+    except ValueError:
+        pass
+    else:
+        sys_path[i] = process.ORIGINAL_DIR
+
+    d.update(
+        name=name,
+        sys_path=sys_path,
+        sys_argv=sys.argv,
+        orig_dir=process.ORIGINAL_DIR,
+        dir=os.getcwd(),
+        start_method=get_start_method(allow_none=True),
+        )
+
+    # Figure out whether to initialise main in the subprocess as a module
+    # or through direct execution (or to leave it alone entirely)
+    main_module = sys.modules['__main__']
+    main_mod_name = getattr(main_module.__spec__, "name", None)
+    if main_mod_name is not None:
+        d['init_main_from_name'] = main_mod_name
+    elif sys.platform != 'win32' or (not WINEXE and not WINSERVICE):
+        main_path = getattr(main_module, '__file__', None)
+        if main_path is not None:
+            if (not os.path.isabs(main_path) and
+                        process.ORIGINAL_DIR is not None):
+                main_path = os.path.join(process.ORIGINAL_DIR, main_path)
+            d['init_main_from_path'] = os.path.normpath(main_path)
+
+    return d
+
+#
+# Prepare current process
+#
+
+old_main_modules = []
+
+def prepare(data):
+    '''
+    Try to get current process ready to unpickle process object
+    '''
+    if 'name' in data:
+        process.current_process().name = data['name']
+
+    if 'authkey' in data:
+        process.current_process().authkey = data['authkey']
+
+    if 'log_to_stderr' in data and data['log_to_stderr']:
+        util.log_to_stderr()
+
+    if 'log_level' in data:
+        util.get_logger().setLevel(data['log_level'])
+
+    if 'sys_path' in data:
+        sys.path = data['sys_path']
+
+    if 'sys_argv' in data:
+        sys.argv = data['sys_argv']
+
+    if 'dir' in data:
+        os.chdir(data['dir'])
+
+    if 'orig_dir' in data:
+        process.ORIGINAL_DIR = data['orig_dir']
+
+    if 'start_method' in data:
+        set_start_method(data['start_method'], force=True)
+
+    if 'init_main_from_name' in data:
+        _fixup_main_from_name(data['init_main_from_name'])
+    elif 'init_main_from_path' in data:
+        _fixup_main_from_path(data['init_main_from_path'])
+
+# Multiprocessing module helpers to fix up the main module in
+# spawned subprocesses
+def _fixup_main_from_name(mod_name):
+    # __main__.py files for packages, directories, zip archives, etc, run
+    # their "main only" code unconditionally, so we don't even try to
+    # populate anything in __main__, nor do we make any changes to
+    # __main__ attributes
+    current_main = sys.modules['__main__']
+    if mod_name == "__main__" or mod_name.endswith(".__main__"):
+        return
+
+    # If this process was forked, __main__ may already be populated
+    if getattr(current_main.__spec__, "name", None) == mod_name:
+        return
+
+    # Otherwise, __main__ may contain some non-main code where we need to
+    # support unpickling it properly. We rerun it as __mp_main__ and make
+    # the normal __main__ an alias to that
+    old_main_modules.append(current_main)
+    main_module = types.ModuleType("__mp_main__")
+    main_content = runpy.run_module(mod_name,
+                                    run_name="__mp_main__",
+                                    alter_sys=True)
+    main_module.__dict__.update(main_content)
+    sys.modules['__main__'] = sys.modules['__mp_main__'] = main_module
+
+
+def _fixup_main_from_path(main_path):
+    # If this process was forked, __main__ may already be populated
+    current_main = sys.modules['__main__']
+
+    # Unfortunately, the main ipython launch script historically had no
+    # "if __name__ == '__main__'" guard, so we work around that
+    # by treating it like a __main__.py file
+    # See https://github.com/ipython/ipython/issues/4698
+    main_name = os.path.splitext(os.path.basename(main_path))[0]
+    if main_name == 'ipython':
+        return
+
+    # Otherwise, if __file__ already has the setting we expect,
+    # there's nothing more to do
+    if getattr(current_main, '__file__', None) == main_path:
+        return
+
+    # If the parent process has sent a path through rather than a module
+    # name we assume it is an executable script that may contain
+    # non-main code that needs to be executed
+    old_main_modules.append(current_main)
+    main_module = types.ModuleType("__mp_main__")
+    main_content = runpy.run_path(main_path,
+                                  run_name="__mp_main__")
+    main_module.__dict__.update(main_content)
+    sys.modules['__main__'] = sys.modules['__mp_main__'] = main_module
+
+
+def import_main_path(main_path):
+    '''
+    Set sys.modules['__main__'] to module at main_path
+    '''
+    _fixup_main_from_path(main_path)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/synchronize.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/synchronize.py
new file mode 100644
index 0000000000000000000000000000000000000000..9188114ae284c742116552e1f80f89fee909848d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/synchronize.py
@@ -0,0 +1,411 @@
+#
+# Module implementing synchronization primitives
+#
+# multiprocessing/synchronize.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+__all__ = [
+    'Lock', 'RLock', 'Semaphore', 'BoundedSemaphore', 'Condition', 'Event'
+    ]
+
+import threading
+import sys
+import tempfile
+import _multiprocessing
+import time
+
+from . import context
+from . import process
+from . import util
+
+# TODO: Do any platforms still lack a functioning sem_open?
+try:
+    from _multiprocessing import SemLock, sem_unlink
+except ImportError:
+    raise ImportError("This platform lacks a functioning sem_open" +
+                      " implementation. https://github.com/python/cpython/issues/48020.")
+
+#
+# Constants
+#
+
+# These match the enum in Modules/_multiprocessing/semaphore.c
+RECURSIVE_MUTEX = 0
+SEMAPHORE = 1
+
+SEM_VALUE_MAX = _multiprocessing.SemLock.SEM_VALUE_MAX
+
+#
+# Base class for semaphores and mutexes; wraps `_multiprocessing.SemLock`
+#
+
+class SemLock(object):
+
+    _rand = tempfile._RandomNameSequence()
+
+    def __init__(self, kind, value, maxvalue, *, ctx):
+        if ctx is None:
+            ctx = context._default_context.get_context()
+        self._is_fork_ctx = ctx.get_start_method() == 'fork'
+        unlink_now = sys.platform == 'win32' or self._is_fork_ctx
+        for i in range(100):
+            try:
+                sl = self._semlock = _multiprocessing.SemLock(
+                    kind, value, maxvalue, self._make_name(),
+                    unlink_now)
+            except FileExistsError:
+                pass
+            else:
+                break
+        else:
+            raise FileExistsError('cannot find name for semaphore')
+
+        util.debug('created semlock with handle %s' % sl.handle)
+        self._make_methods()
+
+        if sys.platform != 'win32':
+            def _after_fork(obj):
+                obj._semlock._after_fork()
+            util.register_after_fork(self, _after_fork)
+
+        if self._semlock.name is not None:
+            # We only get here if we are on Unix with forking
+            # disabled.  When the object is garbage collected or the
+            # process shuts down we unlink the semaphore name
+            from .resource_tracker import register
+            register(self._semlock.name, "semaphore")
+            util.Finalize(self, SemLock._cleanup, (self._semlock.name,),
+                          exitpriority=0)
+
+    @staticmethod
+    def _cleanup(name):
+        from .resource_tracker import unregister
+        sem_unlink(name)
+        unregister(name, "semaphore")
+
+    def _make_methods(self):
+        self.acquire = self._semlock.acquire
+        self.release = self._semlock.release
+
+    def locked(self):
+        return self._semlock._is_zero()
+
+    def __enter__(self):
+        return self._semlock.__enter__()
+
+    def __exit__(self, *args):
+        return self._semlock.__exit__(*args)
+
+    def __getstate__(self):
+        context.assert_spawning(self)
+        sl = self._semlock
+        if sys.platform == 'win32':
+            h = context.get_spawning_popen().duplicate_for_child(sl.handle)
+        else:
+            if self._is_fork_ctx:
+                raise RuntimeError('A SemLock created in a fork context is being '
+                                   'shared with a process in a spawn context. This is '
+                                   'not supported. Please use the same context to create '
+                                   'multiprocessing objects and Process.')
+            h = sl.handle
+        return (h, sl.kind, sl.maxvalue, sl.name)
+
+    def __setstate__(self, state):
+        self._semlock = _multiprocessing.SemLock._rebuild(*state)
+        util.debug('recreated blocker with handle %r' % state[0])
+        self._make_methods()
+        # Ensure that deserialized SemLock can be serialized again (gh-108520).
+        self._is_fork_ctx = False
+
+    @staticmethod
+    def _make_name():
+        return '%s-%s' % (process.current_process()._config['semprefix'],
+                          next(SemLock._rand))
+
+#
+# Semaphore
+#
+
+class Semaphore(SemLock):
+
+    def __init__(self, value=1, *, ctx):
+        SemLock.__init__(self, SEMAPHORE, value, SEM_VALUE_MAX, ctx=ctx)
+
+    def get_value(self):
+        '''Returns current value of Semaphore.
+
+        Raises NotImplementedError on Mac OSX
+        because of broken sem_getvalue().
+        '''
+        return self._semlock._get_value()
+
+    def __repr__(self):
+        try:
+            value = self.get_value()
+        except Exception:
+            value = 'unknown'
+        return '<%s(value=%s)>' % (self.__class__.__name__, value)
+
+#
+# Bounded semaphore
+#
+
+class BoundedSemaphore(Semaphore):
+
+    def __init__(self, value=1, *, ctx):
+        SemLock.__init__(self, SEMAPHORE, value, value, ctx=ctx)
+
+    def __repr__(self):
+        try:
+            value = self.get_value()
+        except Exception:
+            value = 'unknown'
+        return '<%s(value=%s, maxvalue=%s)>' % \
+               (self.__class__.__name__, value, self._semlock.maxvalue)
+
+#
+# Non-recursive lock
+#
+
+class Lock(SemLock):
+
+    def __init__(self, *, ctx):
+        SemLock.__init__(self, SEMAPHORE, 1, 1, ctx=ctx)
+
+    def __repr__(self):
+        try:
+            if self._semlock._is_mine():
+                name = process.current_process().name
+                if threading.current_thread().name != 'MainThread':
+                    name += '|' + threading.current_thread().name
+            elif not self._semlock._is_zero():
+                name = 'None'
+            elif self._semlock._count() > 0:
+                name = 'SomeOtherThread'
+            else:
+                name = 'SomeOtherProcess'
+        except Exception:
+            name = 'unknown'
+        return '<%s(owner=%s)>' % (self.__class__.__name__, name)
+
+#
+# Recursive lock
+#
+
+class RLock(SemLock):
+
+    def __init__(self, *, ctx):
+        SemLock.__init__(self, RECURSIVE_MUTEX, 1, 1, ctx=ctx)
+
+    def __repr__(self):
+        try:
+            if self._semlock._is_mine():
+                name = process.current_process().name
+                if threading.current_thread().name != 'MainThread':
+                    name += '|' + threading.current_thread().name
+                count = self._semlock._count()
+            elif not self._semlock._is_zero():
+                name, count = 'None', 0
+            elif self._semlock._count() > 0:
+                name, count = 'SomeOtherThread', 'nonzero'
+            else:
+                name, count = 'SomeOtherProcess', 'nonzero'
+        except Exception:
+            name, count = 'unknown', 'unknown'
+        return '<%s(%s, %s)>' % (self.__class__.__name__, name, count)
+
+#
+# Condition variable
+#
+
+class Condition(object):
+
+    def __init__(self, lock=None, *, ctx):
+        self._lock = lock or ctx.RLock()
+        self._sleeping_count = ctx.Semaphore(0)
+        self._woken_count = ctx.Semaphore(0)
+        self._wait_semaphore = ctx.Semaphore(0)
+        self._make_methods()
+
+    def __getstate__(self):
+        context.assert_spawning(self)
+        return (self._lock, self._sleeping_count,
+                self._woken_count, self._wait_semaphore)
+
+    def __setstate__(self, state):
+        (self._lock, self._sleeping_count,
+         self._woken_count, self._wait_semaphore) = state
+        self._make_methods()
+
+    def __enter__(self):
+        return self._lock.__enter__()
+
+    def __exit__(self, *args):
+        return self._lock.__exit__(*args)
+
+    def _make_methods(self):
+        self.acquire = self._lock.acquire
+        self.release = self._lock.release
+
+    def __repr__(self):
+        try:
+            num_waiters = (self._sleeping_count.get_value() -
+                           self._woken_count.get_value())
+        except Exception:
+            num_waiters = 'unknown'
+        return '<%s(%s, %s)>' % (self.__class__.__name__, self._lock, num_waiters)
+
+    def wait(self, timeout=None):
+        assert self._lock._semlock._is_mine(), \
+               'must acquire() condition before using wait()'
+
+        # indicate that this thread is going to sleep
+        self._sleeping_count.release()
+
+        # release lock
+        count = self._lock._semlock._count()
+        for i in range(count):
+            self._lock.release()
+
+        try:
+            # wait for notification or timeout
+            return self._wait_semaphore.acquire(True, timeout)
+        finally:
+            # indicate that this thread has woken
+            self._woken_count.release()
+
+            # reacquire lock
+            for i in range(count):
+                self._lock.acquire()
+
+    def notify(self, n=1):
+        assert self._lock._semlock._is_mine(), 'lock is not owned'
+        assert not self._wait_semaphore.acquire(
+            False), ('notify: Should not have been able to acquire '
+                     + '_wait_semaphore')
+
+        # to take account of timeouts since last notify*() we subtract
+        # woken_count from sleeping_count and rezero woken_count
+        while self._woken_count.acquire(False):
+            res = self._sleeping_count.acquire(False)
+            assert res, ('notify: Bug in sleeping_count.acquire'
+                         + '- res should not be False')
+
+        sleepers = 0
+        while sleepers < n and self._sleeping_count.acquire(False):
+            self._wait_semaphore.release()        # wake up one sleeper
+            sleepers += 1
+
+        if sleepers:
+            for i in range(sleepers):
+                self._woken_count.acquire()       # wait for a sleeper to wake
+
+            # rezero wait_semaphore in case some timeouts just happened
+            while self._wait_semaphore.acquire(False):
+                pass
+
+    def notify_all(self):
+        self.notify(n=sys.maxsize)
+
+    def wait_for(self, predicate, timeout=None):
+        result = predicate()
+        if result:
+            return result
+        if timeout is not None:
+            endtime = time.monotonic() + timeout
+        else:
+            endtime = None
+            waittime = None
+        while not result:
+            if endtime is not None:
+                waittime = endtime - time.monotonic()
+                if waittime <= 0:
+                    break
+            self.wait(waittime)
+            result = predicate()
+        return result
+
+#
+# Event
+#
+
+class Event(object):
+
+    def __init__(self, *, ctx):
+        self._cond = ctx.Condition(ctx.Lock())
+        self._flag = ctx.Semaphore(0)
+
+    def is_set(self):
+        with self._cond:
+            if self._flag.acquire(False):
+                self._flag.release()
+                return True
+            return False
+
+    def set(self):
+        with self._cond:
+            self._flag.acquire(False)
+            self._flag.release()
+            self._cond.notify_all()
+
+    def clear(self):
+        with self._cond:
+            self._flag.acquire(False)
+
+    def wait(self, timeout=None):
+        with self._cond:
+            if self._flag.acquire(False):
+                self._flag.release()
+            else:
+                self._cond.wait(timeout)
+
+            if self._flag.acquire(False):
+                self._flag.release()
+                return True
+            return False
+
+    def __repr__(self):
+        set_status = 'set' if self.is_set() else 'unset'
+        return f"<{type(self).__qualname__} at {id(self):#x} {set_status}>"
+#
+# Barrier
+#
+
+class Barrier(threading.Barrier):
+
+    def __init__(self, parties, action=None, timeout=None, *, ctx):
+        import struct
+        from .heap import BufferWrapper
+        wrapper = BufferWrapper(struct.calcsize('i') * 2)
+        cond = ctx.Condition()
+        self.__setstate__((parties, action, timeout, cond, wrapper))
+        self._state = 0
+        self._count = 0
+
+    def __setstate__(self, state):
+        (self._parties, self._action, self._timeout,
+         self._cond, self._wrapper) = state
+        self._array = self._wrapper.create_memoryview().cast('i')
+
+    def __getstate__(self):
+        return (self._parties, self._action, self._timeout,
+                self._cond, self._wrapper)
+
+    @property
+    def _state(self):
+        return self._array[0]
+
+    @_state.setter
+    def _state(self, value):
+        self._array[0] = value
+
+    @property
+    def _count(self):
+        return self._array[1]
+
+    @_count.setter
+    def _count(self, value):
+        self._array[1] = value
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..549fb07c27549e0fbada3d94f9310b4e43d92df7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/multiprocessing/util.py
@@ -0,0 +1,560 @@
+#
+# Module providing various facilities to other parts of the package
+#
+# multiprocessing/util.py
+#
+# Copyright (c) 2006-2008, R Oudkerk
+# Licensed to PSF under a Contributor Agreement.
+#
+
+import os
+import itertools
+import sys
+import weakref
+import atexit
+import threading        # we want threading to install it's
+                        # cleanup function before multiprocessing does
+from subprocess import _args_from_interpreter_flags  # noqa: F401
+
+from . import process
+
+__all__ = [
+    'sub_debug', 'debug', 'info', 'sub_warning', 'warn', 'get_logger',
+    'log_to_stderr', 'get_temp_dir', 'register_after_fork',
+    'is_exiting', 'Finalize', 'ForkAwareThreadLock', 'ForkAwareLocal',
+    'close_all_fds_except', 'SUBDEBUG', 'SUBWARNING',
+    ]
+
+#
+# Logging
+#
+
+NOTSET = 0
+SUBDEBUG = 5
+DEBUG = 10
+INFO = 20
+SUBWARNING = 25
+WARNING = 30
+
+LOGGER_NAME = 'multiprocessing'
+DEFAULT_LOGGING_FORMAT = '[%(levelname)s/%(processName)s] %(message)s'
+
+_logger = None
+_log_to_stderr = False
+
+def sub_debug(msg, *args):
+    if _logger:
+        _logger.log(SUBDEBUG, msg, *args, stacklevel=2)
+
+def debug(msg, *args):
+    if _logger:
+        _logger.log(DEBUG, msg, *args, stacklevel=2)
+
+def info(msg, *args):
+    if _logger:
+        _logger.log(INFO, msg, *args, stacklevel=2)
+
+def warn(msg, *args):
+    if _logger:
+        _logger.log(WARNING, msg, *args, stacklevel=2)
+
+def sub_warning(msg, *args):
+    if _logger:
+        _logger.log(SUBWARNING, msg, *args, stacklevel=2)
+
+def get_logger():
+    '''
+    Returns logger used by multiprocessing
+    '''
+    global _logger
+    import logging
+
+    with logging._lock:
+        if not _logger:
+
+            _logger = logging.getLogger(LOGGER_NAME)
+            _logger.propagate = 0
+
+            # XXX multiprocessing should cleanup before logging
+            if hasattr(atexit, 'unregister'):
+                atexit.unregister(_exit_function)
+                atexit.register(_exit_function)
+            else:
+                atexit._exithandlers.remove((_exit_function, (), {}))
+                atexit._exithandlers.append((_exit_function, (), {}))
+
+    return _logger
+
+def log_to_stderr(level=None):
+    '''
+    Turn on logging and add a handler which prints to stderr
+    '''
+    global _log_to_stderr
+    import logging
+
+    logger = get_logger()
+    formatter = logging.Formatter(DEFAULT_LOGGING_FORMAT)
+    handler = logging.StreamHandler()
+    handler.setFormatter(formatter)
+    logger.addHandler(handler)
+
+    if level:
+        logger.setLevel(level)
+    _log_to_stderr = True
+    return _logger
+
+
+# Abstract socket support
+
+def _platform_supports_abstract_sockets():
+    return sys.platform in ("linux", "android")
+
+
+def is_abstract_socket_namespace(address):
+    if not address:
+        return False
+    if isinstance(address, bytes):
+        return address[0] == 0
+    elif isinstance(address, str):
+        return address[0] == "\0"
+    raise TypeError(f'address type of {address!r} unrecognized')
+
+
+abstract_sockets_supported = _platform_supports_abstract_sockets()
+
+#
+# Function returning a temp directory which will be removed on exit
+#
+
+# Maximum length of a NULL-terminated [1] socket file path is usually
+# between 92 and 108 [2], but Linux is known to use a size of 108 [3].
+# BSD-based systems usually use a size of 104 or 108 and Windows does
+# not create AF_UNIX sockets.
+#
+# [1]: https://github.com/python/cpython/issues/140734
+# [2]: https://pubs.opengroup.org/onlinepubs/9799919799/basedefs/sys_un.h.html
+# [3]: https://man7.org/linux/man-pages/man7/unix.7.html
+
+if sys.platform == 'linux':
+    _SUN_PATH_MAX = 108
+elif sys.platform.startswith(('openbsd', 'freebsd')):
+    _SUN_PATH_MAX = 104
+else:
+    # On Windows platforms, we do not create AF_UNIX sockets.
+    _SUN_PATH_MAX = None if os.name == 'nt' else 92
+
+def _remove_temp_dir(rmtree, tempdir):
+    rmtree(tempdir)
+
+    current_process = process.current_process()
+    # current_process() can be None if the finalizer is called
+    # late during Python finalization
+    if current_process is not None:
+        current_process._config['tempdir'] = None
+
+def _get_base_temp_dir(tempfile):
+    """Get a temporary directory where socket files will be created.
+
+    To prevent additional imports, pass a pre-imported 'tempfile' module.
+    """
+    if os.name == 'nt':
+        return None
+    # Most of the time, the default temporary directory is /tmp. Thus,
+    # listener sockets files "$TMPDIR/pymp-XXXXXXXX/sock-XXXXXXXX" do
+    # not have a path length exceeding SUN_PATH_MAX.
+    #
+    # If users specify their own temporary directory, we may be unable
+    # to create those files. Therefore, we fall back to the system-wide
+    # temporary directory /tmp, assumed to exist on POSIX systems.
+    #
+    # See https://github.com/python/cpython/issues/132124.
+    base_tempdir = tempfile.gettempdir()
+    # Files created in a temporary directory are suffixed by a string
+    # generated by tempfile._RandomNameSequence, which, by design,
+    # is 8 characters long.
+    #
+    # Thus, the socket file path length (without NULL terminator) will be:
+    #
+    #   len(base_tempdir + '/pymp-XXXXXXXX' + '/sock-XXXXXXXX')
+    sun_path_len = len(base_tempdir) + 14 + 14
+    # Strict inequality to account for the NULL terminator.
+    # See https://github.com/python/cpython/issues/140734.
+    if sun_path_len < _SUN_PATH_MAX:
+        return base_tempdir
+    # Fallback to the default system-wide temporary directory.
+    # This ignores user-defined environment variables.
+    #
+    # On POSIX systems, /tmp MUST be writable by any application [1].
+    # We however emit a warning if this is not the case to prevent
+    # obscure errors later in the execution.
+    #
+    # On some legacy systems, /var/tmp and /usr/tmp can be present
+    # and will be used instead.
+    #
+    # [1]: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch03s18.html
+    dirlist = ['/tmp', '/var/tmp', '/usr/tmp']
+    try:
+        base_system_tempdir = tempfile._get_default_tempdir(dirlist)
+    except FileNotFoundError:
+        warn("Process-wide temporary directory %s will not be usable for "
+             "creating socket files and no usable system-wide temporary "
+             "directory was found in %s", base_tempdir, dirlist)
+        # At this point, the system-wide temporary directory is not usable
+        # but we may assume that the user-defined one is, even if we will
+        # not be able to write socket files out there.
+        return base_tempdir
+    warn("Ignoring user-defined temporary directory: %s", base_tempdir)
+    # at most max(map(len, dirlist)) + 14 + 14 = 36 characters
+    assert len(base_system_tempdir) + 14 + 14 < _SUN_PATH_MAX
+    return base_system_tempdir
+
+def get_temp_dir():
+    # get name of a temp directory which will be automatically cleaned up
+    tempdir = process.current_process()._config.get('tempdir')
+    if tempdir is None:
+        import shutil, tempfile
+        base_tempdir = _get_base_temp_dir(tempfile)
+        tempdir = tempfile.mkdtemp(prefix='pymp-', dir=base_tempdir)
+        info('created temp directory %s', tempdir)
+        # keep a strong reference to shutil.rmtree(), since the finalizer
+        # can be called late during Python shutdown
+        Finalize(None, _remove_temp_dir, args=(shutil.rmtree, tempdir),
+                 exitpriority=-100)
+        process.current_process()._config['tempdir'] = tempdir
+    return tempdir
+
+#
+# Support for reinitialization of objects when bootstrapping a child process
+#
+
+_afterfork_registry = weakref.WeakValueDictionary()
+_afterfork_counter = itertools.count()
+
+def _run_after_forkers():
+    items = list(_afterfork_registry.items())
+    items.sort()
+    for (index, ident, func), obj in items:
+        try:
+            func(obj)
+        except Exception as e:
+            info('after forker raised exception %s', e)
+
+def register_after_fork(obj, func):
+    _afterfork_registry[(next(_afterfork_counter), id(obj), func)] = obj
+
+#
+# Finalization using weakrefs
+#
+
+_finalizer_registry = {}
+_finalizer_counter = itertools.count()
+
+
+class Finalize(object):
+    '''
+    Class which supports object finalization using weakrefs
+    '''
+    def __init__(self, obj, callback, args=(), kwargs=None, exitpriority=None):
+        if (exitpriority is not None) and not isinstance(exitpriority,int):
+            raise TypeError(
+                "Exitpriority ({0!r}) must be None or int, not {1!s}".format(
+                    exitpriority, type(exitpriority)))
+
+        if obj is not None:
+            self._weakref = weakref.ref(obj, self)
+        elif exitpriority is None:
+            raise ValueError("Without object, exitpriority cannot be None")
+
+        self._callback = callback
+        self._args = args
+        self._kwargs = kwargs or {}
+        self._key = (exitpriority, next(_finalizer_counter))
+        self._pid = os.getpid()
+
+        _finalizer_registry[self._key] = self
+
+    def __call__(self, wr=None,
+                 # Need to bind these locally because the globals can have
+                 # been cleared at shutdown
+                 _finalizer_registry=_finalizer_registry,
+                 sub_debug=sub_debug, getpid=os.getpid):
+        '''
+        Run the callback unless it has already been called or cancelled
+        '''
+        try:
+            del _finalizer_registry[self._key]
+        except KeyError:
+            sub_debug('finalizer no longer registered')
+        else:
+            if self._pid != getpid():
+                sub_debug('finalizer ignored because different process')
+                res = None
+            else:
+                sub_debug('finalizer calling %s with args %s and kwargs %s',
+                          self._callback, self._args, self._kwargs)
+                res = self._callback(*self._args, **self._kwargs)
+            self._weakref = self._callback = self._args = \
+                            self._kwargs = self._key = None
+            return res
+
+    def cancel(self):
+        '''
+        Cancel finalization of the object
+        '''
+        try:
+            del _finalizer_registry[self._key]
+        except KeyError:
+            pass
+        else:
+            self._weakref = self._callback = self._args = \
+                            self._kwargs = self._key = None
+
+    def still_active(self):
+        '''
+        Return whether this finalizer is still waiting to invoke callback
+        '''
+        return self._key in _finalizer_registry
+
+    def __repr__(self):
+        try:
+            obj = self._weakref()
+        except (AttributeError, TypeError):
+            obj = None
+
+        if obj is None:
+            return '<%s object, dead>' % self.__class__.__name__
+
+        x = '<%s object, callback=%s' % (
+                self.__class__.__name__,
+                getattr(self._callback, '__name__', self._callback))
+        if self._args:
+            x += ', args=' + str(self._args)
+        if self._kwargs:
+            x += ', kwargs=' + str(self._kwargs)
+        if self._key[0] is not None:
+            x += ', exitpriority=' + str(self._key[0])
+        return x + '>'
+
+
+def _run_finalizers(minpriority=None):
+    '''
+    Run all finalizers whose exit priority is not None and at least minpriority
+
+    Finalizers with highest priority are called first; finalizers with
+    the same priority will be called in reverse order of creation.
+    '''
+    if _finalizer_registry is None:
+        # This function may be called after this module's globals are
+        # destroyed.  See the _exit_function function in this module for more
+        # notes.
+        return
+
+    if minpriority is None:
+        f = lambda p : p[0] is not None
+    else:
+        f = lambda p : p[0] is not None and p[0] >= minpriority
+
+    # Careful: _finalizer_registry may be mutated while this function
+    # is running (either by a GC run or by another thread).
+
+    # list(_finalizer_registry) should be atomic, while
+    # list(_finalizer_registry.items()) is not.
+    keys = [key for key in list(_finalizer_registry) if f(key)]
+    keys.sort(reverse=True)
+
+    for key in keys:
+        finalizer = _finalizer_registry.get(key)
+        # key may have been removed from the registry
+        if finalizer is not None:
+            sub_debug('calling %s', finalizer)
+            try:
+                finalizer()
+            except Exception:
+                import traceback
+                traceback.print_exc()
+
+    if minpriority is None:
+        _finalizer_registry.clear()
+
+#
+# Clean up on exit
+#
+
+def is_exiting():
+    '''
+    Returns true if the process is shutting down
+    '''
+    return _exiting or _exiting is None
+
+_exiting = False
+
+def _exit_function(info=info, debug=debug, _run_finalizers=_run_finalizers,
+                   active_children=process.active_children,
+                   current_process=process.current_process):
+    # We hold on to references to functions in the arglist due to the
+    # situation described below, where this function is called after this
+    # module's globals are destroyed.
+
+    global _exiting
+
+    if not _exiting:
+        _exiting = True
+
+        info('process shutting down')
+        debug('running all "atexit" finalizers with priority >= 0')
+        _run_finalizers(0)
+
+        if current_process() is not None:
+            # We check if the current process is None here because if
+            # it's None, any call to ``active_children()`` will raise
+            # an AttributeError (active_children winds up trying to
+            # get attributes from util._current_process).  One
+            # situation where this can happen is if someone has
+            # manipulated sys.modules, causing this module to be
+            # garbage collected.  The destructor for the module type
+            # then replaces all values in the module dict with None.
+            # For instance, after setuptools runs a test it replaces
+            # sys.modules with a copy created earlier.  See issues
+            # #9775 and #15881.  Also related: #4106, #9205, and
+            # #9207.
+
+            for p in active_children():
+                if p.daemon:
+                    info('calling terminate() for daemon %s', p.name)
+                    p._popen.terminate()
+
+            for p in active_children():
+                info('calling join() for process %s', p.name)
+                p.join()
+
+        debug('running the remaining "atexit" finalizers')
+        _run_finalizers()
+
+atexit.register(_exit_function)
+
+#
+# Some fork aware types
+#
+
+class ForkAwareThreadLock(object):
+    def __init__(self):
+        self._lock = threading.Lock()
+        self.acquire = self._lock.acquire
+        self.release = self._lock.release
+        register_after_fork(self, ForkAwareThreadLock._at_fork_reinit)
+
+    def _at_fork_reinit(self):
+        self._lock._at_fork_reinit()
+
+    def __enter__(self):
+        return self._lock.__enter__()
+
+    def __exit__(self, *args):
+        return self._lock.__exit__(*args)
+
+
+class ForkAwareLocal(threading.local):
+    def __init__(self):
+        register_after_fork(self, lambda obj : obj.__dict__.clear())
+    def __reduce__(self):
+        return type(self), ()
+
+#
+# Close fds except those specified
+#
+
+try:
+    MAXFD = os.sysconf("SC_OPEN_MAX")
+except Exception:
+    MAXFD = 256
+
+def close_all_fds_except(fds):
+    fds = list(fds) + [-1, MAXFD]
+    fds.sort()
+    assert fds[-1] == MAXFD, 'fd too large'
+    for i in range(len(fds) - 1):
+        os.closerange(fds[i]+1, fds[i+1])
+#
+# Close sys.stdin and replace stdin with os.devnull
+#
+
+def _close_stdin():
+    if sys.stdin is None:
+        return
+
+    try:
+        sys.stdin.close()
+    except (OSError, ValueError):
+        pass
+
+    try:
+        fd = os.open(os.devnull, os.O_RDONLY)
+        try:
+            sys.stdin = open(fd, encoding="utf-8", closefd=False)
+        except:
+            os.close(fd)
+            raise
+    except (OSError, ValueError):
+        pass
+
+#
+# Flush standard streams, if any
+#
+
+def _flush_std_streams():
+    try:
+        sys.stdout.flush()
+    except (AttributeError, ValueError):
+        pass
+    try:
+        sys.stderr.flush()
+    except (AttributeError, ValueError):
+        pass
+
+#
+# Start a program with only specified fds kept open
+#
+
+def spawnv_passfds(path, args, passfds):
+    import _posixsubprocess
+    passfds = tuple(sorted(map(int, passfds)))
+    errpipe_read, errpipe_write = os.pipe()
+    try:
+        return _posixsubprocess.fork_exec(
+            args, [path], True, passfds, None, None,
+            -1, -1, -1, -1, -1, -1, errpipe_read, errpipe_write,
+            False, False, -1, None, None, None, -1, None)
+    finally:
+        os.close(errpipe_read)
+        os.close(errpipe_write)
+
+
+def close_fds(*fds):
+    """Close each file descriptor given as an argument"""
+    for fd in fds:
+        os.close(fd)
+
+
+def _cleanup_tests():
+    """Cleanup multiprocessing resources when multiprocessing tests
+    completed."""
+
+    from test import support
+
+    # cleanup multiprocessing
+    process._cleanup()
+
+    # Stop the ForkServer process if it's running
+    from multiprocessing import forkserver
+    forkserver._forkserver._stop()
+
+    # Stop the ResourceTracker process if it's running
+    from multiprocessing import resource_tracker
+    resource_tracker._resource_tracker._stop()
+
+    # bpo-37421: Explicitly call _run_finalizers() to remove immediately
+    # temporary directories created by multiprocessing.util.get_temp_dir().
+    _run_finalizers()
+    support.gc_collect()
+
+    support.reap_children()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..0d763d1f0dcaa55bb3b2fe3eadf8a133d668eafb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/__init__.py
@@ -0,0 +1,1307 @@
+"""Object-oriented filesystem paths.
+
+This module provides classes to represent abstract paths and concrete
+paths with operations that have semantics appropriate for different
+operating systems.
+"""
+
+import io
+import ntpath
+import operator
+import os
+import posixpath
+import sys
+from errno import *
+from glob import _StringGlobber, _no_recurse_symlinks
+from itertools import chain
+from stat import S_ISDIR, S_ISREG, S_ISSOCK, S_ISBLK, S_ISCHR, S_ISFIFO
+from _collections_abc import Sequence
+
+try:
+    import pwd
+except ImportError:
+    pwd = None
+try:
+    import grp
+except ImportError:
+    grp = None
+
+from pathlib._os import (
+    PathInfo, DirEntryInfo,
+    ensure_different_files, ensure_distinct_paths,
+    copyfile2, copyfileobj, magic_open, copy_info,
+)
+
+
+__all__ = [
+    "UnsupportedOperation",
+    "PurePath", "PurePosixPath", "PureWindowsPath",
+    "Path", "PosixPath", "WindowsPath",
+    ]
+
+
+class UnsupportedOperation(NotImplementedError):
+    """An exception that is raised when an unsupported operation is attempted.
+    """
+    pass
+
+
+class _PathParents(Sequence):
+    """This object provides sequence-like access to the logical ancestors
+    of a path.  Don't try to construct it yourself."""
+    __slots__ = ('_path', '_drv', '_root', '_tail')
+
+    def __init__(self, path):
+        self._path = path
+        self._drv = path.drive
+        self._root = path.root
+        self._tail = path._tail
+
+    def __len__(self):
+        return len(self._tail)
+
+    def __getitem__(self, idx):
+        if isinstance(idx, slice):
+            return tuple(self[i] for i in range(*idx.indices(len(self))))
+
+        if idx >= len(self) or idx < -len(self):
+            raise IndexError(idx)
+        if idx < 0:
+            idx += len(self)
+        return self._path._from_parsed_parts(self._drv, self._root,
+                                             self._tail[:-idx - 1])
+
+    def __repr__(self):
+        return "<{}.parents>".format(type(self._path).__name__)
+
+
+class PurePath:
+    """Base class for manipulating paths without I/O.
+
+    PurePath represents a filesystem path and offers operations which
+    don't imply any actual filesystem I/O.  Depending on your system,
+    instantiating a PurePath will return either a PurePosixPath or a
+    PureWindowsPath object.  You can also instantiate either of these classes
+    directly, regardless of your system.
+    """
+
+    __slots__ = (
+        # The `_raw_paths` slot stores unjoined string paths. This is set in
+        # the `__init__()` method.
+        '_raw_paths',
+
+        # The `_drv`, `_root` and `_tail_cached` slots store parsed and
+        # normalized parts of the path. They are set when any of the `drive`,
+        # `root` or `_tail` properties are accessed for the first time. The
+        # three-part division corresponds to the result of
+        # `os.path.splitroot()`, except that the tail is further split on path
+        # separators (i.e. it is a list of strings), and that the root and
+        # tail are normalized.
+        '_drv', '_root', '_tail_cached',
+
+        # The `_str` slot stores the string representation of the path,
+        # computed from the drive, root and tail when `__str__()` is called
+        # for the first time. It's used to implement `_str_normcase`
+        '_str',
+
+        # The `_str_normcase_cached` slot stores the string path with
+        # normalized case. It is set when the `_str_normcase` property is
+        # accessed for the first time. It's used to implement `__eq__()`
+        # `__hash__()`, and `_parts_normcase`
+        '_str_normcase_cached',
+
+        # The `_parts_normcase_cached` slot stores the case-normalized
+        # string path after splitting on path separators. It's set when the
+        # `_parts_normcase` property is accessed for the first time. It's used
+        # to implement comparison methods like `__lt__()`.
+        '_parts_normcase_cached',
+
+        # The `_hash` slot stores the hash of the case-normalized string
+        # path. It's set when `__hash__()` is called for the first time.
+        '_hash',
+    )
+    parser = os.path
+
+    def __new__(cls, *args, **kwargs):
+        """Construct a PurePath from one or several strings and or existing
+        PurePath objects.  The strings and path objects are combined so as
+        to yield a canonicalized path, which is incorporated into the
+        new PurePath object.
+        """
+        if cls is PurePath:
+            cls = PureWindowsPath if os.name == 'nt' else PurePosixPath
+        return object.__new__(cls)
+
+    def __init__(self, *args):
+        paths = []
+        for arg in args:
+            if isinstance(arg, PurePath):
+                if arg.parser is not self.parser:
+                    # GH-103631: Convert separators for backwards compatibility.
+                    paths.append(arg.as_posix())
+                else:
+                    paths.extend(arg._raw_paths)
+            else:
+                try:
+                    path = os.fspath(arg)
+                except TypeError:
+                    path = arg
+                if not isinstance(path, str):
+                    raise TypeError(
+                        "argument should be a str or an os.PathLike "
+                        "object where __fspath__ returns a str, "
+                        f"not {type(path).__name__!r}")
+                paths.append(path)
+        self._raw_paths = paths
+
+    def with_segments(self, *pathsegments):
+        """Construct a new path object from any number of path-like objects.
+        Subclasses may override this method to customize how new path objects
+        are created from methods like `iterdir()`.
+        """
+        return type(self)(*pathsegments)
+
+    def joinpath(self, *pathsegments):
+        """Combine this path with one or several arguments, and return a
+        new path representing either a subpath (if all arguments are relative
+        paths) or a totally different path (if one of the arguments is
+        anchored).
+        """
+        return self.with_segments(self, *pathsegments)
+
+    def __truediv__(self, key):
+        try:
+            return self.with_segments(self, key)
+        except TypeError:
+            return NotImplemented
+
+    def __rtruediv__(self, key):
+        try:
+            return self.with_segments(key, self)
+        except TypeError:
+            return NotImplemented
+
+    def __reduce__(self):
+        return self.__class__, tuple(self._raw_paths)
+
+    def __repr__(self):
+        return "{}({!r})".format(self.__class__.__name__, self.as_posix())
+
+    def __fspath__(self):
+        return str(self)
+
+    def __bytes__(self):
+        """Return the bytes representation of the path.  This is only
+        recommended to use under Unix."""
+        return os.fsencode(self)
+
+    @property
+    def _str_normcase(self):
+        # String with normalized case, for hashing and equality checks
+        try:
+            return self._str_normcase_cached
+        except AttributeError:
+            if self.parser is posixpath:
+                self._str_normcase_cached = str(self)
+            else:
+                self._str_normcase_cached = str(self).lower()
+            return self._str_normcase_cached
+
+    def __hash__(self):
+        try:
+            return self._hash
+        except AttributeError:
+            self._hash = hash(self._str_normcase)
+            return self._hash
+
+    def __eq__(self, other):
+        if not isinstance(other, PurePath):
+            return NotImplemented
+        return self._str_normcase == other._str_normcase and self.parser is other.parser
+
+    @property
+    def _parts_normcase(self):
+        # Cached parts with normalized case, for comparisons.
+        try:
+            return self._parts_normcase_cached
+        except AttributeError:
+            self._parts_normcase_cached = self._str_normcase.split(self.parser.sep)
+            return self._parts_normcase_cached
+
+    def __lt__(self, other):
+        if not isinstance(other, PurePath) or self.parser is not other.parser:
+            return NotImplemented
+        return self._parts_normcase < other._parts_normcase
+
+    def __le__(self, other):
+        if not isinstance(other, PurePath) or self.parser is not other.parser:
+            return NotImplemented
+        return self._parts_normcase <= other._parts_normcase
+
+    def __gt__(self, other):
+        if not isinstance(other, PurePath) or self.parser is not other.parser:
+            return NotImplemented
+        return self._parts_normcase > other._parts_normcase
+
+    def __ge__(self, other):
+        if not isinstance(other, PurePath) or self.parser is not other.parser:
+            return NotImplemented
+        return self._parts_normcase >= other._parts_normcase
+
+    def __str__(self):
+        """Return the string representation of the path, suitable for
+        passing to system calls."""
+        try:
+            return self._str
+        except AttributeError:
+            self._str = self._format_parsed_parts(self.drive, self.root,
+                                                  self._tail) or '.'
+            return self._str
+
+    @classmethod
+    def _format_parsed_parts(cls, drv, root, tail):
+        if drv or root:
+            return drv + root + cls.parser.sep.join(tail)
+        elif tail and cls.parser.splitdrive(tail[0])[0]:
+            tail = ['.'] + tail
+        return cls.parser.sep.join(tail)
+
+    def _from_parsed_parts(self, drv, root, tail):
+        path = self._from_parsed_string(self._format_parsed_parts(drv, root, tail))
+        path._drv = drv
+        path._root = root
+        path._tail_cached = tail
+        return path
+
+    def _from_parsed_string(self, path_str):
+        path = self.with_segments(path_str)
+        path._str = path_str or '.'
+        return path
+
+    @classmethod
+    def _parse_path(cls, path):
+        if not path:
+            return '', '', []
+        sep = cls.parser.sep
+        altsep = cls.parser.altsep
+        if altsep:
+            path = path.replace(altsep, sep)
+        drv, root, rel = cls.parser.splitroot(path)
+        if not root and drv.startswith(sep) and not drv.endswith(sep):
+            drv_parts = drv.split(sep)
+            if len(drv_parts) == 4 and drv_parts[2] not in '?.':
+                # e.g. //server/share
+                root = sep
+            elif len(drv_parts) == 6:
+                # e.g. //?/unc/server/share
+                root = sep
+        return drv, root, [x for x in rel.split(sep) if x and x != '.']
+
+    @classmethod
+    def _parse_pattern(cls, pattern):
+        """Parse a glob pattern to a list of parts. This is much like
+        _parse_path, except:
+
+        - Rather than normalizing and returning the drive and root, we raise
+          NotImplementedError if either are present.
+        - If the path has no real parts, we raise ValueError.
+        - If the path ends in a slash, then a final empty part is added.
+        """
+        drv, root, rel = cls.parser.splitroot(pattern)
+        if root or drv:
+            raise NotImplementedError("Non-relative patterns are unsupported")
+        sep = cls.parser.sep
+        altsep = cls.parser.altsep
+        if altsep:
+            rel = rel.replace(altsep, sep)
+        parts = [x for x in rel.split(sep) if x and x != '.']
+        if not parts:
+            raise ValueError(f"Unacceptable pattern: {str(pattern)!r}")
+        elif rel.endswith(sep):
+            # GH-65238: preserve trailing slash in glob patterns.
+            parts.append('')
+        return parts
+
+    def as_posix(self):
+        """Return the string representation of the path with forward (/)
+        slashes."""
+        return str(self).replace(self.parser.sep, '/')
+
+    @property
+    def _raw_path(self):
+        paths = self._raw_paths
+        if len(paths) == 1:
+            return paths[0]
+        elif paths:
+            # Join path segments from the initializer.
+            return self.parser.join(*paths)
+        else:
+            return ''
+
+    @property
+    def drive(self):
+        """The drive prefix (letter or UNC path), if any."""
+        try:
+            return self._drv
+        except AttributeError:
+            self._drv, self._root, self._tail_cached = self._parse_path(self._raw_path)
+            return self._drv
+
+    @property
+    def root(self):
+        """The root of the path, if any."""
+        try:
+            return self._root
+        except AttributeError:
+            self._drv, self._root, self._tail_cached = self._parse_path(self._raw_path)
+            return self._root
+
+    @property
+    def _tail(self):
+        try:
+            return self._tail_cached
+        except AttributeError:
+            self._drv, self._root, self._tail_cached = self._parse_path(self._raw_path)
+            return self._tail_cached
+
+    @property
+    def anchor(self):
+        """The concatenation of the drive and root, or ''."""
+        return self.drive + self.root
+
+    @property
+    def parts(self):
+        """An object providing sequence-like access to the
+        components in the filesystem path."""
+        if self.drive or self.root:
+            return (self.drive + self.root,) + tuple(self._tail)
+        else:
+            return tuple(self._tail)
+
+    @property
+    def parent(self):
+        """The logical parent of the path."""
+        drv = self.drive
+        root = self.root
+        tail = self._tail
+        if not tail:
+            return self
+        return self._from_parsed_parts(drv, root, tail[:-1])
+
+    @property
+    def parents(self):
+        """A sequence of this path's logical parents."""
+        # The value of this property should not be cached on the path object,
+        # as doing so would introduce a reference cycle.
+        return _PathParents(self)
+
+    @property
+    def name(self):
+        """The final path component, if any."""
+        tail = self._tail
+        if not tail:
+            return ''
+        return tail[-1]
+
+    def with_name(self, name):
+        """Return a new path with the file name changed."""
+        p = self.parser
+        if not name or p.sep in name or (p.altsep and p.altsep in name) or name == '.':
+            raise ValueError(f"Invalid name {name!r}")
+        tail = self._tail.copy()
+        if not tail:
+            raise ValueError(f"{self!r} has an empty name")
+        tail[-1] = name
+        return self._from_parsed_parts(self.drive, self.root, tail)
+
+    def with_stem(self, stem):
+        """Return a new path with the stem changed."""
+        suffix = self.suffix
+        if not suffix:
+            return self.with_name(stem)
+        elif not stem:
+            # If the suffix is non-empty, we can't make the stem empty.
+            raise ValueError(f"{self!r} has a non-empty suffix")
+        else:
+            return self.with_name(stem + suffix)
+
+    def with_suffix(self, suffix):
+        """Return a new path with the file suffix changed.  If the path
+        has no suffix, add given suffix.  If the given suffix is an empty
+        string, remove the suffix from the path.
+        """
+        stem = self.stem
+        if not stem:
+            # If the stem is empty, we can't make the suffix non-empty.
+            raise ValueError(f"{self!r} has an empty name")
+        elif suffix and not suffix.startswith('.'):
+            raise ValueError(f"Invalid suffix {suffix!r}")
+        else:
+            return self.with_name(stem + suffix)
+
+    @property
+    def stem(self):
+        """The final path component, minus its last suffix."""
+        name = self.name
+        i = name.rfind('.')
+        if i != -1:
+            stem = name[:i]
+            # Stem must contain at least one non-dot character.
+            if stem.lstrip('.'):
+                return stem
+        return name
+
+    @property
+    def suffix(self):
+        """
+        The final component's last suffix, if any.
+
+        This includes the leading period. For example: '.txt'
+        """
+        name = self.name.lstrip('.')
+        i = name.rfind('.')
+        if i != -1:
+            return name[i:]
+        return ''
+
+    @property
+    def suffixes(self):
+        """
+        A list of the final component's suffixes, if any.
+
+        These include the leading periods. For example: ['.tar', '.gz']
+        """
+        return ['.' + ext for ext in self.name.lstrip('.').split('.')[1:]]
+
+    def relative_to(self, other, *, walk_up=False):
+        """Return the relative path to another path identified by the passed
+        arguments.  If the operation is not possible (because this is not
+        related to the other path), raise ValueError.
+
+        The *walk_up* parameter controls whether `..` may be used to resolve
+        the path.
+        """
+        if not hasattr(other, 'with_segments'):
+            other = self.with_segments(other)
+        for step, path in enumerate(chain([other], other.parents)):
+            if path == self or path in self.parents:
+                break
+            elif not walk_up:
+                raise ValueError(f"{str(self)!r} is not in the subpath of {str(other)!r}")
+            elif path.name == '..':
+                raise ValueError(f"'..' segment in {str(other)!r} cannot be walked")
+        else:
+            raise ValueError(f"{str(self)!r} and {str(other)!r} have different anchors")
+        parts = ['..'] * step + self._tail[len(path._tail):]
+        return self._from_parsed_parts('', '', parts)
+
+    def is_relative_to(self, other):
+        """Return True if the path is relative to another path or False.
+        """
+        if not hasattr(other, 'with_segments'):
+            other = self.with_segments(other)
+        return other == self or other in self.parents
+
+    def is_absolute(self):
+        """True if the path is absolute (has both a root and, if applicable,
+        a drive)."""
+        if self.parser is posixpath:
+            # Optimization: work with raw paths on POSIX.
+            for path in self._raw_paths:
+                if path.startswith('/'):
+                    return True
+            return False
+        return self.parser.isabs(self)
+
+    def is_reserved(self):
+        """Return True if the path contains one of the special names reserved
+        by the system, if any."""
+        import warnings
+        msg = ("pathlib.PurePath.is_reserved() is deprecated and scheduled "
+               "for removal in Python 3.15. Use os.path.isreserved() to "
+               "detect reserved paths on Windows.")
+        warnings._deprecated("pathlib.PurePath.is_reserved", msg, remove=(3, 15))
+        if self.parser is ntpath:
+            return self.parser.isreserved(self)
+        return False
+
+    def as_uri(self):
+        """Return the path as a URI."""
+        import warnings
+        msg = ("pathlib.PurePath.as_uri() is deprecated and scheduled "
+               "for removal in Python 3.19. Use pathlib.Path.as_uri().")
+        warnings._deprecated("pathlib.PurePath.as_uri", msg, remove=(3, 19))
+        if not self.is_absolute():
+            raise ValueError("relative path can't be expressed as a file URI")
+
+        drive = self.drive
+        if len(drive) == 2 and drive[1] == ':':
+            # It's a path on a local drive => 'file:///c:/a/b'
+            prefix = 'file:///' + drive
+            path = self.as_posix()[2:]
+        elif drive:
+            # It's a path on a network drive => 'file://host/share/a/b'
+            prefix = 'file:'
+            path = self.as_posix()
+        else:
+            # It's a posix path => 'file:///etc/hosts'
+            prefix = 'file://'
+            path = str(self)
+        from urllib.parse import quote_from_bytes
+        return prefix + quote_from_bytes(os.fsencode(path))
+
+    def full_match(self, pattern, *, case_sensitive=None):
+        """
+        Return True if this path matches the given glob-style pattern. The
+        pattern is matched against the entire path.
+        """
+        if not hasattr(pattern, 'with_segments'):
+            pattern = self.with_segments(pattern)
+        if case_sensitive is None:
+            case_sensitive = self.parser is posixpath
+
+        # The string representation of an empty path is a single dot ('.'). Empty
+        # paths shouldn't match wildcards, so we change it to the empty string.
+        path = str(self) if self.parts else ''
+        pattern = str(pattern) if pattern.parts else ''
+        globber = _StringGlobber(self.parser.sep, case_sensitive, recursive=True)
+        return globber.compile(pattern)(path) is not None
+
+    def match(self, path_pattern, *, case_sensitive=None):
+        """
+        Return True if this path matches the given pattern. If the pattern is
+        relative, matching is done from the right; otherwise, the entire path
+        is matched. The recursive wildcard '**' is *not* supported by this
+        method.
+        """
+        if not hasattr(path_pattern, 'with_segments'):
+            path_pattern = self.with_segments(path_pattern)
+        if case_sensitive is None:
+            case_sensitive = self.parser is posixpath
+        path_parts = self.parts[::-1]
+        pattern_parts = path_pattern.parts[::-1]
+        if not pattern_parts:
+            raise ValueError("empty pattern")
+        if len(path_parts) < len(pattern_parts):
+            return False
+        if len(path_parts) > len(pattern_parts) and path_pattern.anchor:
+            return False
+        globber = _StringGlobber(self.parser.sep, case_sensitive)
+        for path_part, pattern_part in zip(path_parts, pattern_parts):
+            match = globber.compile(pattern_part)
+            if match(path_part) is None:
+                return False
+        return True
+
+# Subclassing os.PathLike makes isinstance() checks slower,
+# which in turn makes Path construction slower. Register instead!
+os.PathLike.register(PurePath)
+
+
+class PurePosixPath(PurePath):
+    """PurePath subclass for non-Windows systems.
+
+    On a POSIX system, instantiating a PurePath should return this object.
+    However, you can also instantiate it directly on any system.
+    """
+    parser = posixpath
+    __slots__ = ()
+
+
+class PureWindowsPath(PurePath):
+    """PurePath subclass for Windows systems.
+
+    On a Windows system, instantiating a PurePath should return this object.
+    However, you can also instantiate it directly on any system.
+    """
+    parser = ntpath
+    __slots__ = ()
+
+
+class Path(PurePath):
+    """PurePath subclass that can make system calls.
+
+    Path represents a filesystem path but unlike PurePath, also offers
+    methods to do system calls on path objects. Depending on your system,
+    instantiating a Path will return either a PosixPath or a WindowsPath
+    object. You can also instantiate a PosixPath or WindowsPath directly,
+    but cannot instantiate a WindowsPath on a POSIX system or vice versa.
+    """
+    __slots__ = ('_info',)
+
+    def __new__(cls, *args, **kwargs):
+        if cls is Path:
+            cls = WindowsPath if os.name == 'nt' else PosixPath
+        return object.__new__(cls)
+
+    @property
+    def info(self):
+        """
+        A PathInfo object that exposes the file type and other file attributes
+        of this path.
+        """
+        try:
+            return self._info
+        except AttributeError:
+            self._info = PathInfo(self)
+            return self._info
+
+    def stat(self, *, follow_symlinks=True):
+        """
+        Return the result of the stat() system call on this path, like
+        os.stat() does.
+        """
+        return os.stat(self, follow_symlinks=follow_symlinks)
+
+    def lstat(self):
+        """
+        Like stat(), except if the path points to a symlink, the symlink's
+        status information is returned, rather than its target's.
+        """
+        return os.lstat(self)
+
+    def exists(self, *, follow_symlinks=True):
+        """
+        Whether this path exists.
+
+        This method normally follows symlinks; to check whether a symlink exists,
+        add the argument follow_symlinks=False.
+        """
+        if follow_symlinks:
+            return os.path.exists(self)
+        return os.path.lexists(self)
+
+    def is_dir(self, *, follow_symlinks=True):
+        """
+        Whether this path is a directory.
+        """
+        if follow_symlinks:
+            return os.path.isdir(self)
+        try:
+            return S_ISDIR(self.stat(follow_symlinks=follow_symlinks).st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def is_file(self, *, follow_symlinks=True):
+        """
+        Whether this path is a regular file (also True for symlinks pointing
+        to regular files).
+        """
+        if follow_symlinks:
+            return os.path.isfile(self)
+        try:
+            return S_ISREG(self.stat(follow_symlinks=follow_symlinks).st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def is_mount(self):
+        """
+        Check if this path is a mount point
+        """
+        return os.path.ismount(self)
+
+    def is_symlink(self):
+        """
+        Whether this path is a symbolic link.
+        """
+        return os.path.islink(self)
+
+    def is_junction(self):
+        """
+        Whether this path is a junction.
+        """
+        return os.path.isjunction(self)
+
+    def is_block_device(self):
+        """
+        Whether this path is a block device.
+        """
+        try:
+            return S_ISBLK(self.stat().st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def is_char_device(self):
+        """
+        Whether this path is a character device.
+        """
+        try:
+            return S_ISCHR(self.stat().st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def is_fifo(self):
+        """
+        Whether this path is a FIFO.
+        """
+        try:
+            return S_ISFIFO(self.stat().st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def is_socket(self):
+        """
+        Whether this path is a socket.
+        """
+        try:
+            return S_ISSOCK(self.stat().st_mode)
+        except (OSError, ValueError):
+            return False
+
+    def samefile(self, other_path):
+        """Return whether other_path is the same or not as this file
+        (as returned by os.path.samefile()).
+        """
+        st = self.stat()
+        try:
+            other_st = other_path.stat()
+        except AttributeError:
+            other_st = self.with_segments(other_path).stat()
+        return (st.st_ino == other_st.st_ino and
+                st.st_dev == other_st.st_dev)
+
+    def open(self, mode='r', buffering=-1, encoding=None,
+             errors=None, newline=None):
+        """
+        Open the file pointed to by this path and return a file object, as
+        the built-in open() function does.
+        """
+        if "b" not in mode:
+            encoding = io.text_encoding(encoding)
+        return io.open(self, mode, buffering, encoding, errors, newline)
+
+    def read_bytes(self):
+        """
+        Open the file in bytes mode, read it, and close the file.
+        """
+        with self.open(mode='rb', buffering=0) as f:
+            return f.read()
+
+    def read_text(self, encoding=None, errors=None, newline=None):
+        """
+        Open the file in text mode, read it, and close the file.
+        """
+        # Call io.text_encoding() here to ensure any warning is raised at an
+        # appropriate stack level.
+        encoding = io.text_encoding(encoding)
+        with self.open(mode='r', encoding=encoding, errors=errors, newline=newline) as f:
+            return f.read()
+
+    def write_bytes(self, data):
+        """
+        Open the file in bytes mode, write to it, and close the file.
+        """
+        # type-check for the buffer interface before truncating the file
+        view = memoryview(data)
+        with self.open(mode='wb') as f:
+            return f.write(view)
+
+    def write_text(self, data, encoding=None, errors=None, newline=None):
+        """
+        Open the file in text mode, write to it, and close the file.
+        """
+        # Call io.text_encoding() here to ensure any warning is raised at an
+        # appropriate stack level.
+        encoding = io.text_encoding(encoding)
+        if not isinstance(data, str):
+            raise TypeError('data must be str, not %s' %
+                            data.__class__.__name__)
+        with self.open(mode='w', encoding=encoding, errors=errors, newline=newline) as f:
+            return f.write(data)
+
+    _remove_leading_dot = operator.itemgetter(slice(2, None))
+    _remove_trailing_slash = operator.itemgetter(slice(-1))
+
+    def _filter_trailing_slash(self, paths):
+        sep = self.parser.sep
+        anchor_len = len(self.anchor)
+        for path_str in paths:
+            if len(path_str) > anchor_len and path_str[-1] == sep:
+                path_str = path_str[:-1]
+            yield path_str
+
+    def _from_dir_entry(self, dir_entry, path_str):
+        path = self.with_segments(path_str)
+        path._str = path_str
+        path._info = DirEntryInfo(dir_entry)
+        return path
+
+    def iterdir(self):
+        """Yield path objects of the directory contents.
+
+        The children are yielded in arbitrary order, and the
+        special entries '.' and '..' are not included.
+        """
+        root_dir = str(self)
+        with os.scandir(root_dir) as scandir_it:
+            entries = list(scandir_it)
+        if root_dir == '.':
+            return (self._from_dir_entry(e, e.name) for e in entries)
+        else:
+            return (self._from_dir_entry(e, e.path) for e in entries)
+
+    def glob(self, pattern, *, case_sensitive=None, recurse_symlinks=False):
+        """Iterate over this subtree and yield all existing files (of any
+        kind, including directories) matching the given relative pattern.
+        """
+        sys.audit("pathlib.Path.glob", self, pattern)
+        if case_sensitive is None:
+            case_sensitive = self.parser is posixpath
+            case_pedantic = False
+        else:
+            # The user has expressed a case sensitivity choice, but we don't
+            # know the case sensitivity of the underlying filesystem, so we
+            # must use scandir() for everything, including non-wildcard parts.
+            case_pedantic = True
+        parts = self._parse_pattern(pattern)
+        recursive = True if recurse_symlinks else _no_recurse_symlinks
+        globber = _StringGlobber(self.parser.sep, case_sensitive, case_pedantic, recursive)
+        select = globber.selector(parts[::-1])
+        root = str(self)
+        paths = select(self.parser.join(root, ''))
+
+        # Normalize results
+        if root == '.':
+            paths = map(self._remove_leading_dot, paths)
+        if parts[-1] == '':
+            paths = map(self._remove_trailing_slash, paths)
+        elif parts[-1] == '**':
+            paths = self._filter_trailing_slash(paths)
+        paths = map(self._from_parsed_string, paths)
+        return paths
+
+    def rglob(self, pattern, *, case_sensitive=None, recurse_symlinks=False):
+        """Recursively yield all existing files (of any kind, including
+        directories) matching the given relative pattern, anywhere in
+        this subtree.
+        """
+        sys.audit("pathlib.Path.rglob", self, pattern)
+        pattern = self.parser.join('**', pattern)
+        return self.glob(pattern, case_sensitive=case_sensitive, recurse_symlinks=recurse_symlinks)
+
+    def walk(self, top_down=True, on_error=None, follow_symlinks=False):
+        """Walk the directory tree from this directory, similar to os.walk()."""
+        sys.audit("pathlib.Path.walk", self, on_error, follow_symlinks)
+        root_dir = str(self)
+        if not follow_symlinks:
+            follow_symlinks = os._walk_symlinks_as_files
+        results = os.walk(root_dir, top_down, on_error, follow_symlinks)
+        for path_str, dirnames, filenames in results:
+            if root_dir == '.':
+                path_str = path_str[2:]
+            yield self._from_parsed_string(path_str), dirnames, filenames
+
+    def absolute(self):
+        """Return an absolute version of this path
+        No normalization or symlink resolution is performed.
+
+        Use resolve() to resolve symlinks and remove '..' segments.
+        """
+        if self.is_absolute():
+            return self
+        if self.root:
+            drive = os.path.splitroot(os.getcwd())[0]
+            return self._from_parsed_parts(drive, self.root, self._tail)
+        if self.drive:
+            # There is a CWD on each drive-letter drive.
+            cwd = os.path.abspath(self.drive)
+        else:
+            cwd = os.getcwd()
+        if not self._tail:
+            # Fast path for "empty" paths, e.g. Path("."), Path("") or Path().
+            # We pass only one argument to with_segments() to avoid the cost
+            # of joining, and we exploit the fact that getcwd() returns a
+            # fully-normalized string by storing it in _str. This is used to
+            # implement Path.cwd().
+            return self._from_parsed_string(cwd)
+        drive, root, rel = os.path.splitroot(cwd)
+        if not rel:
+            return self._from_parsed_parts(drive, root, self._tail)
+        tail = rel.split(self.parser.sep)
+        tail.extend(self._tail)
+        return self._from_parsed_parts(drive, root, tail)
+
+    @classmethod
+    def cwd(cls):
+        """Return a new path pointing to the current working directory."""
+        cwd = os.getcwd()
+        path = cls(cwd)
+        path._str = cwd  # getcwd() returns a normalized path
+        return path
+
+    def resolve(self, strict=False):
+        """
+        Make the path absolute, resolving all symlinks on the way and also
+        normalizing it.
+        """
+
+        return self.with_segments(os.path.realpath(self, strict=strict))
+
+    if pwd:
+        def owner(self, *, follow_symlinks=True):
+            """
+            Return the login name of the file owner.
+            """
+            uid = self.stat(follow_symlinks=follow_symlinks).st_uid
+            return pwd.getpwuid(uid).pw_name
+    else:
+        def owner(self, *, follow_symlinks=True):
+            """
+            Return the login name of the file owner.
+            """
+            f = f"{type(self).__name__}.owner()"
+            raise UnsupportedOperation(f"{f} is unsupported on this system")
+
+    if grp:
+        def group(self, *, follow_symlinks=True):
+            """
+            Return the group name of the file gid.
+            """
+            gid = self.stat(follow_symlinks=follow_symlinks).st_gid
+            return grp.getgrgid(gid).gr_name
+    else:
+        def group(self, *, follow_symlinks=True):
+            """
+            Return the group name of the file gid.
+            """
+            f = f"{type(self).__name__}.group()"
+            raise UnsupportedOperation(f"{f} is unsupported on this system")
+
+    if hasattr(os, "readlink"):
+        def readlink(self):
+            """
+            Return the path to which the symbolic link points.
+            """
+            return self.with_segments(os.readlink(self))
+    else:
+        def readlink(self):
+            """
+            Return the path to which the symbolic link points.
+            """
+            f = f"{type(self).__name__}.readlink()"
+            raise UnsupportedOperation(f"{f} is unsupported on this system")
+
+    def touch(self, mode=0o666, exist_ok=True):
+        """
+        Create this file with the given access mode, if it doesn't exist.
+        """
+
+        if exist_ok:
+            # First try to bump modification time
+            # Implementation note: GNU touch uses the UTIME_NOW option of
+            # the utimensat() / futimens() functions.
+            try:
+                os.utime(self, None)
+            except OSError:
+                # Avoid exception chaining
+                pass
+            else:
+                return
+        flags = os.O_CREAT | os.O_WRONLY
+        if not exist_ok:
+            flags |= os.O_EXCL
+        fd = os.open(self, flags, mode)
+        os.close(fd)
+
+    def mkdir(self, mode=0o777, parents=False, exist_ok=False):
+        """
+        Create a new directory at this given path.
+        """
+        try:
+            os.mkdir(self, mode)
+        except FileNotFoundError:
+            if not parents or self.parent == self:
+                raise
+            self.parent.mkdir(parents=True, exist_ok=True)
+            self.mkdir(mode, parents=False, exist_ok=exist_ok)
+        except OSError:
+            # Cannot rely on checking for EEXIST, since the operating system
+            # could give priority to other errors like EACCES or EROFS
+            if not exist_ok or not self.is_dir():
+                raise
+
+    def chmod(self, mode, *, follow_symlinks=True):
+        """
+        Change the permissions of the path, like os.chmod().
+        """
+        os.chmod(self, mode, follow_symlinks=follow_symlinks)
+
+    def lchmod(self, mode):
+        """
+        Like chmod(), except if the path points to a symlink, the symlink's
+        permissions are changed, rather than its target's.
+        """
+        self.chmod(mode, follow_symlinks=False)
+
+    def unlink(self, missing_ok=False):
+        """
+        Remove this file or link.
+        If the path is a directory, use rmdir() instead.
+        """
+        try:
+            os.unlink(self)
+        except FileNotFoundError:
+            if not missing_ok:
+                raise
+
+    def rmdir(self):
+        """
+        Remove this directory.  The directory must be empty.
+        """
+        os.rmdir(self)
+
+    def _delete(self):
+        """
+        Delete this file or directory (including all sub-directories).
+        """
+        if self.is_symlink() or self.is_junction():
+            self.unlink()
+        elif self.is_dir():
+            # Lazy import to improve module import time
+            import shutil
+            shutil.rmtree(self)
+        else:
+            self.unlink()
+
+    def rename(self, target):
+        """
+        Rename this path to the target path.
+
+        The target path may be absolute or relative. Relative paths are
+        interpreted relative to the current working directory, *not* the
+        directory of the Path object.
+
+        Returns the new Path instance pointing to the target path.
+        """
+        os.rename(self, target)
+        if not hasattr(target, 'with_segments'):
+            target = self.with_segments(target)
+        return target
+
+    def replace(self, target):
+        """
+        Rename this path to the target path, overwriting if that path exists.
+
+        The target path may be absolute or relative. Relative paths are
+        interpreted relative to the current working directory, *not* the
+        directory of the Path object.
+
+        Returns the new Path instance pointing to the target path.
+        """
+        os.replace(self, target)
+        if not hasattr(target, 'with_segments'):
+            target = self.with_segments(target)
+        return target
+
+    def copy(self, target, **kwargs):
+        """
+        Recursively copy this file or directory tree to the given destination.
+        """
+        if not hasattr(target, 'with_segments'):
+            target = self.with_segments(target)
+        ensure_distinct_paths(self, target)
+        target._copy_from(self, **kwargs)
+        return target.joinpath()  # Empty join to ensure fresh metadata.
+
+    def copy_into(self, target_dir, **kwargs):
+        """
+        Copy this file or directory tree into the given existing directory.
+        """
+        name = self.name
+        if not name:
+            raise ValueError(f"{self!r} has an empty name")
+        elif hasattr(target_dir, 'with_segments'):
+            target = target_dir / name
+        else:
+            target = self.with_segments(target_dir, name)
+        return self.copy(target, **kwargs)
+
+    def _copy_from(self, source, follow_symlinks=True, preserve_metadata=False):
+        """
+        Recursively copy the given path to this path.
+        """
+        if not follow_symlinks and source.info.is_symlink():
+            self._copy_from_symlink(source, preserve_metadata)
+        elif source.info.is_dir():
+            children = source.iterdir()
+            os.mkdir(self)
+            for child in children:
+                self.joinpath(child.name)._copy_from(
+                    child, follow_symlinks, preserve_metadata)
+            if preserve_metadata:
+                copy_info(source.info, self)
+        else:
+            self._copy_from_file(source, preserve_metadata)
+
+    def _copy_from_file(self, source, preserve_metadata=False):
+        ensure_different_files(source, self)
+        with magic_open(source, 'rb') as source_f:
+            with open(self, 'wb') as target_f:
+                copyfileobj(source_f, target_f)
+        if preserve_metadata:
+            copy_info(source.info, self)
+
+    if copyfile2:
+        # Use fast OS routine for local file copying where available.
+        _copy_from_file_fallback = _copy_from_file
+        def _copy_from_file(self, source, preserve_metadata=False):
+            try:
+                source = os.fspath(source)
+            except TypeError:
+                pass
+            else:
+                copyfile2(source, str(self))
+                return
+            self._copy_from_file_fallback(source, preserve_metadata)
+
+    if os.name == 'nt':
+        # If a directory-symlink is copied *before* its target, then
+        # os.symlink() incorrectly creates a file-symlink on Windows. Avoid
+        # this by passing *target_is_dir* to os.symlink() on Windows.
+        def _copy_from_symlink(self, source, preserve_metadata=False):
+            os.symlink(str(source.readlink()), self, source.info.is_dir())
+            if preserve_metadata:
+                copy_info(source.info, self, follow_symlinks=False)
+    else:
+        def _copy_from_symlink(self, source, preserve_metadata=False):
+            os.symlink(str(source.readlink()), self)
+            if preserve_metadata:
+                copy_info(source.info, self, follow_symlinks=False)
+
+    def move(self, target):
+        """
+        Recursively move this file or directory tree to the given destination.
+        """
+        # Use os.replace() if the target is os.PathLike and on the same FS.
+        try:
+            target = self.with_segments(target)
+        except TypeError:
+            pass
+        else:
+            ensure_different_files(self, target)
+            try:
+                os.replace(self, target)
+            except OSError as err:
+                if err.errno != EXDEV:
+                    raise
+            else:
+                return target.joinpath()  # Empty join to ensure fresh metadata.
+        # Fall back to copy+delete.
+        target = self.copy(target, follow_symlinks=False, preserve_metadata=True)
+        self._delete()
+        return target
+
+    def move_into(self, target_dir):
+        """
+        Move this file or directory tree into the given existing directory.
+        """
+        name = self.name
+        if not name:
+            raise ValueError(f"{self!r} has an empty name")
+        elif hasattr(target_dir, 'with_segments'):
+            target = target_dir / name
+        else:
+            target = self.with_segments(target_dir, name)
+        return self.move(target)
+
+    if hasattr(os, "symlink"):
+        def symlink_to(self, target, target_is_directory=False):
+            """
+            Make this path a symlink pointing to the target path.
+            Note the order of arguments (link, target) is the reverse of os.symlink.
+            """
+            os.symlink(target, self, target_is_directory)
+    else:
+        def symlink_to(self, target, target_is_directory=False):
+            """
+            Make this path a symlink pointing to the target path.
+            Note the order of arguments (link, target) is the reverse of os.symlink.
+            """
+            f = f"{type(self).__name__}.symlink_to()"
+            raise UnsupportedOperation(f"{f} is unsupported on this system")
+
+    if hasattr(os, "link"):
+        def hardlink_to(self, target):
+            """
+            Make this path a hard link pointing to the same file as *target*.
+
+            Note the order of arguments (self, target) is the reverse of os.link's.
+            """
+            os.link(target, self)
+    else:
+        def hardlink_to(self, target):
+            """
+            Make this path a hard link pointing to the same file as *target*.
+
+            Note the order of arguments (self, target) is the reverse of os.link's.
+            """
+            f = f"{type(self).__name__}.hardlink_to()"
+            raise UnsupportedOperation(f"{f} is unsupported on this system")
+
+    def expanduser(self):
+        """ Return a new path with expanded ~ and ~user constructs
+        (as returned by os.path.expanduser)
+        """
+        if (not (self.drive or self.root) and
+            self._tail and self._tail[0][:1] == '~'):
+            homedir = os.path.expanduser(self._tail[0])
+            if homedir[:1] == "~":
+                raise RuntimeError("Could not determine home directory.")
+            drv, root, tail = self._parse_path(homedir)
+            return self._from_parsed_parts(drv, root, tail + self._tail[1:])
+
+        return self
+
+    @classmethod
+    def home(cls):
+        """Return a new path pointing to expanduser('~').
+        """
+        homedir = os.path.expanduser("~")
+        if homedir == "~":
+            raise RuntimeError("Could not determine home directory.")
+        return cls(homedir)
+
+    def as_uri(self):
+        """Return the path as a URI."""
+        if not self.is_absolute():
+            raise ValueError("relative paths can't be expressed as file URIs")
+        from urllib.request import pathname2url
+        return pathname2url(str(self), add_scheme=True)
+
+    @classmethod
+    def from_uri(cls, uri):
+        """Return a new path from the given 'file' URI."""
+        from urllib.error import URLError
+        from urllib.request import url2pathname
+        try:
+            path = cls(url2pathname(uri, require_scheme=True))
+        except URLError as exc:
+            raise ValueError(exc.reason) from None
+        if not path.is_absolute():
+            raise ValueError(f"URI is not absolute: {uri!r}")
+        return path
+
+
+class PosixPath(Path, PurePosixPath):
+    """Path subclass for non-Windows systems.
+
+    On a POSIX system, instantiating a Path should return this object.
+    """
+    __slots__ = ()
+
+    if os.name == 'nt':
+        def __new__(cls, *args, **kwargs):
+            raise UnsupportedOperation(
+                f"cannot instantiate {cls.__name__!r} on your system")
+
+class WindowsPath(Path, PureWindowsPath):
+    """Path subclass for Windows systems.
+
+    On a Windows system, instantiating a Path should return this object.
+    """
+    __slots__ = ()
+
+    if os.name != 'nt':
+        def __new__(cls, *args, **kwargs):
+            raise UnsupportedOperation(
+                f"cannot instantiate {cls.__name__!r} on your system")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_local.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_local.py
new file mode 100644
index 0000000000000000000000000000000000000000..58e137f2a92d3b967a6c79343237d658b3290868
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_local.py
@@ -0,0 +1,12 @@
+"""
+This module exists so that pathlib objects pickled under Python 3.13 can be
+unpickled in 3.14+.
+"""
+
+from pathlib import *
+
+__all__ = [
+    "UnsupportedOperation",
+    "PurePath", "PurePosixPath", "PureWindowsPath",
+    "Path", "PosixPath", "WindowsPath",
+]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_os.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_os.py
new file mode 100644
index 0000000000000000000000000000000000000000..039836941dd456e186e2de23b76d54ec5d1c6bd4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/_os.py
@@ -0,0 +1,530 @@
+"""
+Low-level OS functionality wrappers used by pathlib.
+"""
+
+from errno import *
+from io import TextIOWrapper, text_encoding
+from stat import S_ISDIR, S_ISREG, S_ISLNK, S_IMODE
+import os
+import sys
+try:
+    import fcntl
+except ImportError:
+    fcntl = None
+try:
+    import posix
+except ImportError:
+    posix = None
+try:
+    import _winapi
+except ImportError:
+    _winapi = None
+
+
+def _get_copy_blocksize(infd):
+    """Determine blocksize for fastcopying on Linux.
+    Hopefully the whole file will be copied in a single call.
+    The copying itself should be performed in a loop 'till EOF is
+    reached (0 return) so a blocksize smaller or bigger than the actual
+    file size should not make any difference, also in case the file
+    content changes while being copied.
+    """
+    try:
+        blocksize = max(os.fstat(infd).st_size, 2 ** 23)  # min 8 MiB
+    except OSError:
+        blocksize = 2 ** 27  # 128 MiB
+    # On 32-bit architectures truncate to 1 GiB to avoid OverflowError,
+    # see gh-82500.
+    if sys.maxsize < 2 ** 32:
+        blocksize = min(blocksize, 2 ** 30)
+    return blocksize
+
+
+if fcntl and hasattr(fcntl, 'FICLONE'):
+    def _ficlone(source_fd, target_fd):
+        """
+        Perform a lightweight copy of two files, where the data blocks are
+        copied only when modified. This is known as Copy on Write (CoW),
+        instantaneous copy or reflink.
+        """
+        fcntl.ioctl(target_fd, fcntl.FICLONE, source_fd)
+else:
+    _ficlone = None
+
+
+if posix and hasattr(posix, '_fcopyfile'):
+    def _fcopyfile(source_fd, target_fd):
+        """
+        Copy a regular file content using high-performance fcopyfile(3)
+        syscall (macOS).
+        """
+        posix._fcopyfile(source_fd, target_fd, posix._COPYFILE_DATA)
+else:
+    _fcopyfile = None
+
+
+if hasattr(os, 'copy_file_range'):
+    def _copy_file_range(source_fd, target_fd):
+        """
+        Copy data from one regular mmap-like fd to another by using a
+        high-performance copy_file_range(2) syscall that gives filesystems
+        an opportunity to implement the use of reflinks or server-side
+        copy.
+        This should work on Linux >= 4.5 only.
+        """
+        blocksize = _get_copy_blocksize(source_fd)
+        offset = 0
+        while True:
+            sent = os.copy_file_range(source_fd, target_fd, blocksize,
+                                      offset_dst=offset)
+            if sent == 0:
+                break  # EOF
+            offset += sent
+else:
+    _copy_file_range = None
+
+
+if hasattr(os, 'sendfile'):
+    def _sendfile(source_fd, target_fd):
+        """Copy data from one regular mmap-like fd to another by using
+        high-performance sendfile(2) syscall.
+        This should work on Linux >= 2.6.33 only.
+        """
+        blocksize = _get_copy_blocksize(source_fd)
+        offset = 0
+        while True:
+            sent = os.sendfile(target_fd, source_fd, offset, blocksize)
+            if sent == 0:
+                break  # EOF
+            offset += sent
+else:
+    _sendfile = None
+
+
+if _winapi and hasattr(_winapi, 'CopyFile2'):
+    def copyfile2(source, target):
+        """
+        Copy from one file to another using CopyFile2 (Windows only).
+        """
+        _winapi.CopyFile2(source, target, 0)
+else:
+    copyfile2 = None
+
+
+def copyfileobj(source_f, target_f):
+    """
+    Copy data from file-like object source_f to file-like object target_f.
+    """
+    try:
+        source_fd = source_f.fileno()
+        target_fd = target_f.fileno()
+    except Exception:
+        pass  # Fall through to generic code.
+    else:
+        try:
+            # Use OS copy-on-write where available.
+            if _ficlone:
+                try:
+                    _ficlone(source_fd, target_fd)
+                    return
+                except OSError as err:
+                    if err.errno not in (EBADF, EOPNOTSUPP, ETXTBSY, EXDEV):
+                        raise err
+
+            # Use OS copy where available.
+            if _fcopyfile:
+                try:
+                    _fcopyfile(source_fd, target_fd)
+                    return
+                except OSError as err:
+                    if err.errno not in (EINVAL, ENOTSUP):
+                        raise err
+            if _copy_file_range:
+                try:
+                    _copy_file_range(source_fd, target_fd)
+                    return
+                except OSError as err:
+                    if err.errno not in (ETXTBSY, EXDEV):
+                        raise err
+            if _sendfile:
+                try:
+                    _sendfile(source_fd, target_fd)
+                    return
+                except OSError as err:
+                    if err.errno != ENOTSOCK:
+                        raise err
+        except OSError as err:
+            # Produce more useful error messages.
+            err.filename = source_f.name
+            err.filename2 = target_f.name
+            raise err
+
+    # Last resort: copy with fileobj read() and write().
+    read_source = source_f.read
+    write_target = target_f.write
+    while buf := read_source(1024 * 1024):
+        write_target(buf)
+
+
+def magic_open(path, mode='r', buffering=-1, encoding=None, errors=None,
+               newline=None):
+    """
+    Open the file pointed to by this path and return a file object, as
+    the built-in open() function does.
+    """
+    text = 'b' not in mode
+    if text:
+        # Call io.text_encoding() here to ensure any warning is raised at an
+        # appropriate stack level.
+        encoding = text_encoding(encoding)
+    try:
+        return open(path, mode, buffering, encoding, errors, newline)
+    except TypeError:
+        pass
+    cls = type(path)
+    mode = ''.join(sorted(c for c in mode if c not in 'bt'))
+    if text:
+        try:
+            attr = getattr(cls, f'__open_{mode}__')
+        except AttributeError:
+            pass
+        else:
+            return attr(path, buffering, encoding, errors, newline)
+    elif encoding is not None:
+        raise ValueError("binary mode doesn't take an encoding argument")
+    elif errors is not None:
+        raise ValueError("binary mode doesn't take an errors argument")
+    elif newline is not None:
+        raise ValueError("binary mode doesn't take a newline argument")
+
+    try:
+        attr = getattr(cls, f'__open_{mode}b__')
+    except AttributeError:
+        pass
+    else:
+        stream = attr(path, buffering)
+        if text:
+            stream = TextIOWrapper(stream, encoding, errors, newline)
+        return stream
+
+    raise TypeError(f"{cls.__name__} can't be opened with mode {mode!r}")
+
+
+def ensure_distinct_paths(source, target):
+    """
+    Raise OSError(EINVAL) if the other path is within this path.
+    """
+    # Note: there is no straightforward, foolproof algorithm to determine
+    # if one directory is within another (a particularly perverse example
+    # would be a single network share mounted in one location via NFS, and
+    # in another location via CIFS), so we simply checks whether the
+    # other path is lexically equal to, or within, this path.
+    if source == target:
+        err = OSError(EINVAL, "Source and target are the same path")
+    elif source in target.parents:
+        err = OSError(EINVAL, "Source path is a parent of target path")
+    else:
+        return
+    err.filename = str(source)
+    err.filename2 = str(target)
+    raise err
+
+
+def ensure_different_files(source, target):
+    """
+    Raise OSError(EINVAL) if both paths refer to the same file.
+    """
+    try:
+        source_file_id = source.info._file_id
+        target_file_id = target.info._file_id
+    except AttributeError:
+        if source != target:
+            return
+    else:
+        try:
+            if source_file_id() != target_file_id():
+                return
+        except (OSError, ValueError):
+            return
+    err = OSError(EINVAL, "Source and target are the same file")
+    err.filename = str(source)
+    err.filename2 = str(target)
+    raise err
+
+
+def copy_info(info, target, follow_symlinks=True):
+    """Copy metadata from the given PathInfo to the given local path."""
+    copy_times_ns = (
+        hasattr(info, '_access_time_ns') and
+        hasattr(info, '_mod_time_ns') and
+        (follow_symlinks or os.utime in os.supports_follow_symlinks))
+    if copy_times_ns:
+        t0 = info._access_time_ns(follow_symlinks=follow_symlinks)
+        t1 = info._mod_time_ns(follow_symlinks=follow_symlinks)
+        os.utime(target, ns=(t0, t1), follow_symlinks=follow_symlinks)
+
+    # We must copy extended attributes before the file is (potentially)
+    # chmod()'ed read-only, otherwise setxattr() will error with -EACCES.
+    copy_xattrs = (
+        hasattr(info, '_xattrs') and
+        hasattr(os, 'setxattr') and
+        (follow_symlinks or os.setxattr in os.supports_follow_symlinks))
+    if copy_xattrs:
+        xattrs = info._xattrs(follow_symlinks=follow_symlinks)
+        for attr, value in xattrs:
+            try:
+                os.setxattr(target, attr, value, follow_symlinks=follow_symlinks)
+            except OSError as e:
+                if e.errno not in (EPERM, ENOTSUP, ENODATA, EINVAL, EACCES):
+                    raise
+
+    copy_posix_permissions = (
+        hasattr(info, '_posix_permissions') and
+        (follow_symlinks or os.chmod in os.supports_follow_symlinks))
+    if copy_posix_permissions:
+        posix_permissions = info._posix_permissions(follow_symlinks=follow_symlinks)
+        try:
+            os.chmod(target, posix_permissions, follow_symlinks=follow_symlinks)
+        except NotImplementedError:
+            # if we got a NotImplementedError, it's because
+            #   * follow_symlinks=False,
+            #   * lchown() is unavailable, and
+            #   * either
+            #       * fchownat() is unavailable or
+            #       * fchownat() doesn't implement AT_SYMLINK_NOFOLLOW.
+            #         (it returned ENOSUP.)
+            # therefore we're out of options--we simply cannot chown the
+            # symlink.  give up, suppress the error.
+            # (which is what shutil always did in this circumstance.)
+            pass
+
+    copy_bsd_flags = (
+        hasattr(info, '_bsd_flags') and
+        hasattr(os, 'chflags') and
+        (follow_symlinks or os.chflags in os.supports_follow_symlinks))
+    if copy_bsd_flags:
+        bsd_flags = info._bsd_flags(follow_symlinks=follow_symlinks)
+        try:
+            os.chflags(target, bsd_flags, follow_symlinks=follow_symlinks)
+        except OSError as why:
+            if why.errno not in (EOPNOTSUPP, ENOTSUP):
+                raise
+
+
+class _PathInfoBase:
+    __slots__ = ('_path', '_stat_result', '_lstat_result')
+
+    def __init__(self, path):
+        self._path = str(path)
+
+    def __repr__(self):
+        path_type = "WindowsPath" if os.name == "nt" else "PosixPath"
+        return f"<{path_type}.info>"
+
+    def _stat(self, *, follow_symlinks=True, ignore_errors=False):
+        """Return the status as an os.stat_result, or None if stat() fails and
+        ignore_errors is true."""
+        if follow_symlinks:
+            try:
+                result = self._stat_result
+            except AttributeError:
+                pass
+            else:
+                if ignore_errors or result is not None:
+                    return result
+            try:
+                self._stat_result = os.stat(self._path)
+            except (OSError, ValueError):
+                self._stat_result = None
+                if not ignore_errors:
+                    raise
+            return self._stat_result
+        else:
+            try:
+                result = self._lstat_result
+            except AttributeError:
+                pass
+            else:
+                if ignore_errors or result is not None:
+                    return result
+            try:
+                self._lstat_result = os.lstat(self._path)
+            except (OSError, ValueError):
+                self._lstat_result = None
+                if not ignore_errors:
+                    raise
+            return self._lstat_result
+
+    def _posix_permissions(self, *, follow_symlinks=True):
+        """Return the POSIX file permissions."""
+        return S_IMODE(self._stat(follow_symlinks=follow_symlinks).st_mode)
+
+    def _file_id(self, *, follow_symlinks=True):
+        """Returns the identifier of the file."""
+        st = self._stat(follow_symlinks=follow_symlinks)
+        return st.st_dev, st.st_ino
+
+    def _access_time_ns(self, *, follow_symlinks=True):
+        """Return the access time in nanoseconds."""
+        return self._stat(follow_symlinks=follow_symlinks).st_atime_ns
+
+    def _mod_time_ns(self, *, follow_symlinks=True):
+        """Return the modify time in nanoseconds."""
+        return self._stat(follow_symlinks=follow_symlinks).st_mtime_ns
+
+    if hasattr(os.stat_result, 'st_flags'):
+        def _bsd_flags(self, *, follow_symlinks=True):
+            """Return the flags."""
+            return self._stat(follow_symlinks=follow_symlinks).st_flags
+
+    if hasattr(os, 'listxattr'):
+        def _xattrs(self, *, follow_symlinks=True):
+            """Return the xattrs as a list of (attr, value) pairs, or an empty
+            list if extended attributes aren't supported."""
+            try:
+                return [
+                    (attr, os.getxattr(self._path, attr, follow_symlinks=follow_symlinks))
+                    for attr in os.listxattr(self._path, follow_symlinks=follow_symlinks)]
+            except OSError as err:
+                if err.errno not in (EPERM, ENOTSUP, ENODATA, EINVAL, EACCES):
+                    raise
+                return []
+
+
+class _WindowsPathInfo(_PathInfoBase):
+    """Implementation of pathlib.types.PathInfo that provides status
+    information for Windows paths. Don't try to construct it yourself."""
+    __slots__ = ('_exists', '_is_dir', '_is_file', '_is_symlink')
+
+    def exists(self, *, follow_symlinks=True):
+        """Whether this path exists."""
+        if not follow_symlinks and self.is_symlink():
+            return True
+        try:
+            return self._exists
+        except AttributeError:
+            if os.path.exists(self._path):
+                self._exists = True
+                return True
+            else:
+                self._exists = self._is_dir = self._is_file = False
+                return False
+
+    def is_dir(self, *, follow_symlinks=True):
+        """Whether this path is a directory."""
+        if not follow_symlinks and self.is_symlink():
+            return False
+        try:
+            return self._is_dir
+        except AttributeError:
+            if os.path.isdir(self._path):
+                self._is_dir = self._exists = True
+                return True
+            else:
+                self._is_dir = False
+                return False
+
+    def is_file(self, *, follow_symlinks=True):
+        """Whether this path is a regular file."""
+        if not follow_symlinks and self.is_symlink():
+            return False
+        try:
+            return self._is_file
+        except AttributeError:
+            if os.path.isfile(self._path):
+                self._is_file = self._exists = True
+                return True
+            else:
+                self._is_file = False
+                return False
+
+    def is_symlink(self):
+        """Whether this path is a symbolic link."""
+        try:
+            return self._is_symlink
+        except AttributeError:
+            self._is_symlink = os.path.islink(self._path)
+            return self._is_symlink
+
+
+class _PosixPathInfo(_PathInfoBase):
+    """Implementation of pathlib.types.PathInfo that provides status
+    information for POSIX paths. Don't try to construct it yourself."""
+    __slots__ = ()
+
+    def exists(self, *, follow_symlinks=True):
+        """Whether this path exists."""
+        st = self._stat(follow_symlinks=follow_symlinks, ignore_errors=True)
+        if st is None:
+            return False
+        return True
+
+    def is_dir(self, *, follow_symlinks=True):
+        """Whether this path is a directory."""
+        st = self._stat(follow_symlinks=follow_symlinks, ignore_errors=True)
+        if st is None:
+            return False
+        return S_ISDIR(st.st_mode)
+
+    def is_file(self, *, follow_symlinks=True):
+        """Whether this path is a regular file."""
+        st = self._stat(follow_symlinks=follow_symlinks, ignore_errors=True)
+        if st is None:
+            return False
+        return S_ISREG(st.st_mode)
+
+    def is_symlink(self):
+        """Whether this path is a symbolic link."""
+        st = self._stat(follow_symlinks=False, ignore_errors=True)
+        if st is None:
+            return False
+        return S_ISLNK(st.st_mode)
+
+
+PathInfo = _WindowsPathInfo if os.name == 'nt' else _PosixPathInfo
+
+
+class DirEntryInfo(_PathInfoBase):
+    """Implementation of pathlib.types.PathInfo that provides status
+    information by querying a wrapped os.DirEntry object. Don't try to
+    construct it yourself."""
+    __slots__ = ('_entry',)
+
+    def __init__(self, entry):
+        super().__init__(entry.path)
+        self._entry = entry
+
+    def _stat(self, *, follow_symlinks=True, ignore_errors=False):
+        try:
+            return self._entry.stat(follow_symlinks=follow_symlinks)
+        except OSError:
+            if not ignore_errors:
+                raise
+            return None
+
+    def exists(self, *, follow_symlinks=True):
+        """Whether this path exists."""
+        if not follow_symlinks:
+            return True
+        return self._stat(ignore_errors=True) is not None
+
+    def is_dir(self, *, follow_symlinks=True):
+        """Whether this path is a directory."""
+        try:
+            return self._entry.is_dir(follow_symlinks=follow_symlinks)
+        except OSError:
+            return False
+
+    def is_file(self, *, follow_symlinks=True):
+        """Whether this path is a regular file."""
+        try:
+            return self._entry.is_file(follow_symlinks=follow_symlinks)
+        except OSError:
+            return False
+
+    def is_symlink(self):
+        """Whether this path is a symbolic link."""
+        try:
+            return self._entry.is_symlink()
+        except OSError:
+            return False
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/types.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/types.py
new file mode 100644
index 0000000000000000000000000000000000000000..d8f5c34a1a75131c447d9655924353efcf83d336
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pathlib/types.py
@@ -0,0 +1,430 @@
+"""
+Protocols for supporting classes in pathlib.
+"""
+
+# This module also provides abstract base classes for rich path objects.
+# These ABCs are a *private* part of the Python standard library, but they're
+# made available as a PyPI package called "pathlib-abc". It's possible they'll
+# become an official part of the standard library in future.
+#
+# Three ABCs are provided -- _JoinablePath, _ReadablePath and _WritablePath
+
+
+from abc import ABC, abstractmethod
+from glob import _PathGlobber
+from io import text_encoding
+from pathlib._os import magic_open, ensure_distinct_paths, ensure_different_files, copyfileobj
+from pathlib import PurePath, Path
+from typing import Optional, Protocol, runtime_checkable
+
+
+def _explode_path(path, split):
+    """
+    Split the path into a 2-tuple (anchor, parts), where *anchor* is the
+    uppermost parent of the path (equivalent to path.parents[-1]), and
+    *parts* is a reversed list of parts following the anchor.
+    """
+    parent, name = split(path)
+    names = []
+    while path != parent:
+        names.append(name)
+        path = parent
+        parent, name = split(path)
+    return path, names
+
+
+@runtime_checkable
+class _PathParser(Protocol):
+    """Protocol for path parsers, which do low-level path manipulation.
+
+    Path parsers provide a subset of the os.path API, specifically those
+    functions needed to provide JoinablePath functionality. Each JoinablePath
+    subclass references its path parser via a 'parser' class attribute.
+    """
+
+    sep: str
+    altsep: Optional[str]
+    def split(self, path: str) -> tuple[str, str]: ...
+    def splitext(self, path: str) -> tuple[str, str]: ...
+    def normcase(self, path: str) -> str: ...
+
+
+@runtime_checkable
+class PathInfo(Protocol):
+    """Protocol for path info objects, which support querying the file type.
+    Methods may return cached results.
+    """
+    def exists(self, *, follow_symlinks: bool = True) -> bool: ...
+    def is_dir(self, *, follow_symlinks: bool = True) -> bool: ...
+    def is_file(self, *, follow_symlinks: bool = True) -> bool: ...
+    def is_symlink(self) -> bool: ...
+
+
+class _JoinablePath(ABC):
+    """Abstract base class for pure path objects.
+
+    This class *does not* provide several magic methods that are defined in
+    its implementation PurePath. They are: __init__, __fspath__, __bytes__,
+    __reduce__, __hash__, __eq__, __lt__, __le__, __gt__, __ge__.
+    """
+    __slots__ = ()
+
+    @property
+    @abstractmethod
+    def parser(self):
+        """Implementation of pathlib._types.Parser used for low-level path
+        parsing and manipulation.
+        """
+        raise NotImplementedError
+
+    @abstractmethod
+    def with_segments(self, *pathsegments):
+        """Construct a new path object from any number of path-like objects.
+        Subclasses may override this method to customize how new path objects
+        are created from methods like `iterdir()`.
+        """
+        raise NotImplementedError
+
+    @abstractmethod
+    def __str__(self):
+        """Return the string representation of the path, suitable for
+        passing to system calls."""
+        raise NotImplementedError
+
+    @property
+    def anchor(self):
+        """The concatenation of the drive and root, or ''."""
+        return _explode_path(str(self), self.parser.split)[0]
+
+    @property
+    def name(self):
+        """The final path component, if any."""
+        return self.parser.split(str(self))[1]
+
+    @property
+    def suffix(self):
+        """
+        The final component's last suffix, if any.
+
+        This includes the leading period. For example: '.txt'
+        """
+        return self.parser.splitext(self.name)[1]
+
+    @property
+    def suffixes(self):
+        """
+        A list of the final component's suffixes, if any.
+
+        These include the leading periods. For example: ['.tar', '.gz']
+        """
+        split = self.parser.splitext
+        stem, suffix = split(self.name)
+        suffixes = []
+        while suffix:
+            suffixes.append(suffix)
+            stem, suffix = split(stem)
+        return suffixes[::-1]
+
+    @property
+    def stem(self):
+        """The final path component, minus its last suffix."""
+        return self.parser.splitext(self.name)[0]
+
+    def with_name(self, name):
+        """Return a new path with the file name changed."""
+        split = self.parser.split
+        if split(name)[0]:
+            raise ValueError(f"Invalid name {name!r}")
+        path = str(self)
+        path = path.removesuffix(split(path)[1]) + name
+        return self.with_segments(path)
+
+    def with_stem(self, stem):
+        """Return a new path with the stem changed."""
+        suffix = self.suffix
+        if not suffix:
+            return self.with_name(stem)
+        elif not stem:
+            # If the suffix is non-empty, we can't make the stem empty.
+            raise ValueError(f"{self!r} has a non-empty suffix")
+        else:
+            return self.with_name(stem + suffix)
+
+    def with_suffix(self, suffix):
+        """Return a new path with the file suffix changed.  If the path
+        has no suffix, add given suffix.  If the given suffix is an empty
+        string, remove the suffix from the path.
+        """
+        stem = self.stem
+        if not stem:
+            # If the stem is empty, we can't make the suffix non-empty.
+            raise ValueError(f"{self!r} has an empty name")
+        elif suffix and not suffix.startswith('.'):
+            raise ValueError(f"Invalid suffix {suffix!r}")
+        else:
+            return self.with_name(stem + suffix)
+
+    @property
+    def parts(self):
+        """An object providing sequence-like access to the
+        components in the filesystem path."""
+        anchor, parts = _explode_path(str(self), self.parser.split)
+        if anchor:
+            parts.append(anchor)
+        return tuple(reversed(parts))
+
+    def joinpath(self, *pathsegments):
+        """Combine this path with one or several arguments, and return a
+        new path representing either a subpath (if all arguments are relative
+        paths) or a totally different path (if one of the arguments is
+        anchored).
+        """
+        return self.with_segments(str(self), *pathsegments)
+
+    def __truediv__(self, key):
+        try:
+            return self.with_segments(str(self), key)
+        except TypeError:
+            return NotImplemented
+
+    def __rtruediv__(self, key):
+        try:
+            return self.with_segments(key, str(self))
+        except TypeError:
+            return NotImplemented
+
+    @property
+    def parent(self):
+        """The logical parent of the path."""
+        path = str(self)
+        parent = self.parser.split(path)[0]
+        if path != parent:
+            return self.with_segments(parent)
+        return self
+
+    @property
+    def parents(self):
+        """A sequence of this path's logical parents."""
+        split = self.parser.split
+        path = str(self)
+        parent = split(path)[0]
+        parents = []
+        while path != parent:
+            parents.append(self.with_segments(parent))
+            path = parent
+            parent = split(path)[0]
+        return tuple(parents)
+
+    def full_match(self, pattern):
+        """
+        Return True if this path matches the given glob-style pattern. The
+        pattern is matched against the entire path.
+        """
+        case_sensitive = self.parser.normcase('Aa') == 'Aa'
+        globber = _PathGlobber(self.parser.sep, case_sensitive, recursive=True)
+        match = globber.compile(pattern, altsep=self.parser.altsep)
+        return match(str(self)) is not None
+
+
+class _ReadablePath(_JoinablePath):
+    """Abstract base class for readable path objects.
+
+    The Path class implements this ABC for local filesystem paths. Users may
+    create subclasses to implement readable virtual filesystem paths, such as
+    paths in archive files or on remote storage systems.
+    """
+    __slots__ = ()
+
+    @property
+    @abstractmethod
+    def info(self):
+        """
+        A PathInfo object that exposes the file type and other file attributes
+        of this path.
+        """
+        raise NotImplementedError
+
+    @abstractmethod
+    def __open_rb__(self, buffering=-1):
+        """
+        Open the file pointed to by this path for reading in binary mode and
+        return a file object, like open(mode='rb').
+        """
+        raise NotImplementedError
+
+    def read_bytes(self):
+        """
+        Open the file in bytes mode, read it, and close the file.
+        """
+        with magic_open(self, mode='rb', buffering=0) as f:
+            return f.read()
+
+    def read_text(self, encoding=None, errors=None, newline=None):
+        """
+        Open the file in text mode, read it, and close the file.
+        """
+        # Call io.text_encoding() here to ensure any warning is raised at an
+        # appropriate stack level.
+        encoding = text_encoding(encoding)
+        with magic_open(self, mode='r', encoding=encoding, errors=errors, newline=newline) as f:
+            return f.read()
+
+    @abstractmethod
+    def iterdir(self):
+        """Yield path objects of the directory contents.
+
+        The children are yielded in arbitrary order, and the
+        special entries '.' and '..' are not included.
+        """
+        raise NotImplementedError
+
+    def glob(self, pattern, *, recurse_symlinks=True):
+        """Iterate over this subtree and yield all existing files (of any
+        kind, including directories) matching the given relative pattern.
+        """
+        anchor, parts = _explode_path(pattern, self.parser.split)
+        if anchor:
+            raise NotImplementedError("Non-relative patterns are unsupported")
+        elif not parts:
+            raise ValueError(f"Unacceptable pattern: {pattern!r}")
+        elif not recurse_symlinks:
+            raise NotImplementedError("recurse_symlinks=False is unsupported")
+        case_sensitive = self.parser.normcase('Aa') == 'Aa'
+        globber = _PathGlobber(self.parser.sep, case_sensitive, recursive=True)
+        select = globber.selector(parts)
+        return select(self.joinpath(''))
+
+    def walk(self, top_down=True, on_error=None, follow_symlinks=False):
+        """Walk the directory tree from this directory, similar to os.walk()."""
+        paths = [self]
+        while paths:
+            path = paths.pop()
+            if isinstance(path, tuple):
+                yield path
+                continue
+            dirnames = []
+            filenames = []
+            if not top_down:
+                paths.append((path, dirnames, filenames))
+            try:
+                for child in path.iterdir():
+                    if child.info.is_dir(follow_symlinks=follow_symlinks):
+                        if not top_down:
+                            paths.append(child)
+                        dirnames.append(child.name)
+                    else:
+                        filenames.append(child.name)
+            except OSError as error:
+                if on_error is not None:
+                    on_error(error)
+                if not top_down:
+                    while not isinstance(paths.pop(), tuple):
+                        pass
+                continue
+            if top_down:
+                yield path, dirnames, filenames
+                paths += [path.joinpath(d) for d in reversed(dirnames)]
+
+    @abstractmethod
+    def readlink(self):
+        """
+        Return the path to which the symbolic link points.
+        """
+        raise NotImplementedError
+
+    def copy(self, target, **kwargs):
+        """
+        Recursively copy this file or directory tree to the given destination.
+        """
+        ensure_distinct_paths(self, target)
+        target._copy_from(self, **kwargs)
+        return target.joinpath()  # Empty join to ensure fresh metadata.
+
+    def copy_into(self, target_dir, **kwargs):
+        """
+        Copy this file or directory tree into the given existing directory.
+        """
+        name = self.name
+        if not name:
+            raise ValueError(f"{self!r} has an empty name")
+        return self.copy(target_dir / name, **kwargs)
+
+
+class _WritablePath(_JoinablePath):
+    """Abstract base class for writable path objects.
+
+    The Path class implements this ABC for local filesystem paths. Users may
+    create subclasses to implement writable virtual filesystem paths, such as
+    paths in archive files or on remote storage systems.
+    """
+    __slots__ = ()
+
+    @abstractmethod
+    def symlink_to(self, target, target_is_directory=False):
+        """
+        Make this path a symlink pointing to the target path.
+        Note the order of arguments (link, target) is the reverse of os.symlink.
+        """
+        raise NotImplementedError
+
+    @abstractmethod
+    def mkdir(self):
+        """
+        Create a new directory at this given path.
+        """
+        raise NotImplementedError
+
+    @abstractmethod
+    def __open_wb__(self, buffering=-1):
+        """
+        Open the file pointed to by this path for writing in binary mode and
+        return a file object, like open(mode='wb').
+        """
+        raise NotImplementedError
+
+    def write_bytes(self, data):
+        """
+        Open the file in bytes mode, write to it, and close the file.
+        """
+        # type-check for the buffer interface before truncating the file
+        view = memoryview(data)
+        with magic_open(self, mode='wb') as f:
+            return f.write(view)
+
+    def write_text(self, data, encoding=None, errors=None, newline=None):
+        """
+        Open the file in text mode, write to it, and close the file.
+        """
+        # Call io.text_encoding() here to ensure any warning is raised at an
+        # appropriate stack level.
+        encoding = text_encoding(encoding)
+        if not isinstance(data, str):
+            raise TypeError('data must be str, not %s' %
+                            data.__class__.__name__)
+        with magic_open(self, mode='w', encoding=encoding, errors=errors, newline=newline) as f:
+            return f.write(data)
+
+    def _copy_from(self, source, follow_symlinks=True):
+        """
+        Recursively copy the given path to this path.
+        """
+        stack = [(source, self)]
+        while stack:
+            src, dst = stack.pop()
+            if not follow_symlinks and src.info.is_symlink():
+                dst.symlink_to(str(src.readlink()), src.info.is_dir())
+            elif src.info.is_dir():
+                children = src.iterdir()
+                dst.mkdir()
+                for child in children:
+                    stack.append((child, dst.joinpath(child.name)))
+            else:
+                ensure_different_files(src, dst)
+                with magic_open(src, 'rb') as source_f:
+                    with magic_open(dst, 'wb') as target_f:
+                        copyfileobj(source_f, target_f)
+
+
+_JoinablePath.register(PurePath)
+_ReadablePath.register(Path)
+_WritablePath.register(Path)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/_pydoc.css b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/_pydoc.css
new file mode 100644
index 0000000000000000000000000000000000000000..a6aa2e4c1a021ef1a7030f409e371c25dce13ecd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/_pydoc.css
@@ -0,0 +1,112 @@
+/*
+    CSS file for pydoc.
+
+    Contents of this file are subject to change without notice.
+
+*/
+
+body {
+    background-color: #f0f0f8;
+}
+
+table.heading tr {
+    background-color: #7799ee;
+}
+
+.decor {
+    color: #ffffff;
+}
+
+.title-decor {
+    background-color: #ffc8d8;
+    color: #000000;
+}
+
+.pkg-content-decor {
+    background-color: #aa55cc;
+}
+
+.index-decor {
+    background-color: #ee77aa;
+}
+
+.functions-decor {
+    background-color: #eeaa77;
+}
+
+.data-decor {
+    background-color: #55aa55;
+}
+
+.author-decor {
+    background-color: #7799ee;
+}
+
+.credits-decor {
+    background-color: #7799ee;
+}
+
+.error-decor {
+    background-color: #bb0000;
+}
+
+.grey {
+    color: #909090;
+}
+
+.white {
+    color: #ffffff;
+}
+
+.repr {
+    color: #c040c0;
+}
+
+table.heading tr td.title {
+    vertical-align: bottom;
+}
+
+table.heading tr td.extra {
+    vertical-align: bottom;
+    text-align: right;
+}
+
+.heading-text {
+    font-family: helvetica, arial;
+}
+
+.bigsection {
+    font-size: larger;
+}
+
+.title {
+    font-size: x-large;
+}
+
+.code {
+    font-family: monospace;
+}
+
+table {
+    width: 100%;
+    border-spacing : 0;
+    border-collapse : collapse;
+    border: 0;
+}
+
+td {
+    padding: 2;
+}
+
+td.section-title {
+    vertical-align: bottom;
+}
+
+td.multicolumn {
+    width: 25%;
+    vertical-align: bottom;
+}
+
+td.singlecolumn {
+    width: 100%;
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/module_docs.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/module_docs.py
new file mode 100644
index 0000000000000000000000000000000000000000..d65837838d1cab79c0c82128b56f2fa780de218d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/module_docs.py
@@ -0,0 +1,320 @@
+# Autogenerated by Sphinx on Tue Apr  7 16:13:12 2026
+# as part of the release process.
+
+module_docs = {
+    '__future__': '__future__#module-__future__',
+    '__main__': '__main__#module-__main__',
+    '_thread': '_thread#module-_thread',
+    '_tkinter': 'tkinter#module-_tkinter',
+    'abc': 'abc#module-abc',
+    'aifc': 'aifc#module-aifc',
+    'annotationlib': 'annotationlib#module-annotationlib',
+    'argparse': 'argparse#module-argparse',
+    'array': 'array#module-array',
+    'ast': 'ast#module-ast',
+    'asynchat': 'asynchat#module-asynchat',
+    'asyncio': 'asyncio#module-asyncio',
+    'asyncore': 'asyncore#module-asyncore',
+    'atexit': 'atexit#module-atexit',
+    'audioop': 'audioop#module-audioop',
+    'base64': 'base64#module-base64',
+    'bdb': 'bdb#module-bdb',
+    'binascii': 'binascii#module-binascii',
+    'bisect': 'bisect#module-bisect',
+    'builtins': 'builtins#module-builtins',
+    'bz2': 'bz2#module-bz2',
+    'cProfile': 'profile#module-cProfile',
+    'calendar': 'calendar#module-calendar',
+    'cgi': 'cgi#module-cgi',
+    'cgitb': 'cgitb#module-cgitb',
+    'chunk': 'chunk#module-chunk',
+    'cmath': 'cmath#module-cmath',
+    'cmd': 'cmd#module-cmd',
+    'code': 'code#module-code',
+    'codecs': 'codecs#module-codecs',
+    'codeop': 'codeop#module-codeop',
+    'collections': 'collections#module-collections',
+    'collections.abc': 'collections.abc#module-collections.abc',
+    'colorsys': 'colorsys#module-colorsys',
+    'compileall': 'compileall#module-compileall',
+    'compression': 'compression#module-compression',
+    'compression.zstd': 'compression.zstd#module-compression.zstd',
+    'concurrent.futures': 'concurrent.futures#module-concurrent.futures',
+    'concurrent.interpreters': 'concurrent.interpreters#module-concurrent.interpreters',
+    'configparser': 'configparser#module-configparser',
+    'contextlib': 'contextlib#module-contextlib',
+    'contextvars': 'contextvars#module-contextvars',
+    'copy': 'copy#module-copy',
+    'copyreg': 'copyreg#module-copyreg',
+    'crypt': 'crypt#module-crypt',
+    'csv': 'csv#module-csv',
+    'ctypes': 'ctypes#module-ctypes',
+    'curses': 'curses#module-curses',
+    'curses.ascii': 'curses.ascii#module-curses.ascii',
+    'curses.panel': 'curses.panel#module-curses.panel',
+    'curses.textpad': 'curses#module-curses.textpad',
+    'dataclasses': 'dataclasses#module-dataclasses',
+    'datetime': 'datetime#module-datetime',
+    'dbm': 'dbm#module-dbm',
+    'dbm.dumb': 'dbm#module-dbm.dumb',
+    'dbm.gnu': 'dbm#module-dbm.gnu',
+    'dbm.ndbm': 'dbm#module-dbm.ndbm',
+    'dbm.sqlite3': 'dbm#module-dbm.sqlite3',
+    'decimal': 'decimal#module-decimal',
+    'difflib': 'difflib#module-difflib',
+    'dis': 'dis#module-dis',
+    'distutils': 'distutils#module-distutils',
+    'doctest': 'doctest#module-doctest',
+    'email': 'email#module-email',
+    'email.charset': 'email.charset#module-email.charset',
+    'email.contentmanager': 'email.contentmanager#module-email.contentmanager',
+    'email.encoders': 'email.encoders#module-email.encoders',
+    'email.errors': 'email.errors#module-email.errors',
+    'email.generator': 'email.generator#module-email.generator',
+    'email.header': 'email.header#module-email.header',
+    'email.headerregistry': 'email.headerregistry#module-email.headerregistry',
+    'email.iterators': 'email.iterators#module-email.iterators',
+    'email.message': 'email.message#module-email.message',
+    'email.mime': 'email.mime#module-email.mime',
+    'email.mime.application': 'email.mime#module-email.mime.application',
+    'email.mime.audio': 'email.mime#module-email.mime.audio',
+    'email.mime.base': 'email.mime#module-email.mime.base',
+    'email.mime.image': 'email.mime#module-email.mime.image',
+    'email.mime.message': 'email.mime#module-email.mime.message',
+    'email.mime.multipart': 'email.mime#module-email.mime.multipart',
+    'email.mime.nonmultipart': 'email.mime#module-email.mime.nonmultipart',
+    'email.mime.text': 'email.mime#module-email.mime.text',
+    'email.parser': 'email.parser#module-email.parser',
+    'email.policy': 'email.policy#module-email.policy',
+    'email.utils': 'email.utils#module-email.utils',
+    'encodings': 'codecs#module-encodings',
+    'encodings.idna': 'codecs#module-encodings.idna',
+    'encodings.mbcs': 'codecs#module-encodings.mbcs',
+    'encodings.utf_8_sig': 'codecs#module-encodings.utf_8_sig',
+    'ensurepip': 'ensurepip#module-ensurepip',
+    'enum': 'enum#module-enum',
+    'errno': 'errno#module-errno',
+    'faulthandler': 'faulthandler#module-faulthandler',
+    'fcntl': 'fcntl#module-fcntl',
+    'filecmp': 'filecmp#module-filecmp',
+    'fileinput': 'fileinput#module-fileinput',
+    'fnmatch': 'fnmatch#module-fnmatch',
+    'fractions': 'fractions#module-fractions',
+    'ftplib': 'ftplib#module-ftplib',
+    'functools': 'functools#module-functools',
+    'gc': 'gc#module-gc',
+    'getopt': 'getopt#module-getopt',
+    'getpass': 'getpass#module-getpass',
+    'gettext': 'gettext#module-gettext',
+    'glob': 'glob#module-glob',
+    'graphlib': 'graphlib#module-graphlib',
+    'grp': 'grp#module-grp',
+    'gzip': 'gzip#module-gzip',
+    'hashlib': 'hashlib#module-hashlib',
+    'heapq': 'heapq#module-heapq',
+    'hmac': 'hmac#module-hmac',
+    'html': 'html#module-html',
+    'html.entities': 'html.entities#module-html.entities',
+    'html.parser': 'html.parser#module-html.parser',
+    'http': 'http#module-http',
+    'http.client': 'http.client#module-http.client',
+    'http.cookiejar': 'http.cookiejar#module-http.cookiejar',
+    'http.cookies': 'http.cookies#module-http.cookies',
+    'http.server': 'http.server#module-http.server',
+    'idlelib': 'idle#module-idlelib',
+    'imaplib': 'imaplib#module-imaplib',
+    'imghdr': 'imghdr#module-imghdr',
+    'imp': 'imp#module-imp',
+    'importlib': 'importlib#module-importlib',
+    'importlib.abc': 'importlib#module-importlib.abc',
+    'importlib.machinery': 'importlib#module-importlib.machinery',
+    'importlib.metadata': 'importlib.metadata#module-importlib.metadata',
+    'importlib.resources': 'importlib.resources#module-importlib.resources',
+    'importlib.resources.abc': 'importlib.resources.abc#module-importlib.resources.abc',
+    'importlib.util': 'importlib#module-importlib.util',
+    'inspect': 'inspect#module-inspect',
+    'io': 'io#module-io',
+    'ipaddress': 'ipaddress#module-ipaddress',
+    'itertools': 'itertools#module-itertools',
+    'json': 'json#module-json',
+    'json.tool': 'json#module-json.tool',
+    'keyword': 'keyword#module-keyword',
+    'linecache': 'linecache#module-linecache',
+    'locale': 'locale#module-locale',
+    'logging': 'logging#module-logging',
+    'logging.config': 'logging.config#module-logging.config',
+    'logging.handlers': 'logging.handlers#module-logging.handlers',
+    'lzma': 'lzma#module-lzma',
+    'mailbox': 'mailbox#module-mailbox',
+    'mailcap': 'mailcap#module-mailcap',
+    'marshal': 'marshal#module-marshal',
+    'math': 'math#module-math',
+    'mimetypes': 'mimetypes#module-mimetypes',
+    'mmap': 'mmap#module-mmap',
+    'modulefinder': 'modulefinder#module-modulefinder',
+    'msilib': 'msilib#module-msilib',
+    'msvcrt': 'msvcrt#module-msvcrt',
+    'multiprocessing': 'multiprocessing#module-multiprocessing',
+    'multiprocessing.connection': 'multiprocessing#module-multiprocessing.connection',
+    'multiprocessing.dummy': 'multiprocessing#module-multiprocessing.dummy',
+    'multiprocessing.managers': 'multiprocessing#module-multiprocessing.managers',
+    'multiprocessing.pool': 'multiprocessing#module-multiprocessing.pool',
+    'multiprocessing.shared_memory': 'multiprocessing.shared_memory#module-multiprocessing.shared_memory',
+    'multiprocessing.sharedctypes': 'multiprocessing#module-multiprocessing.sharedctypes',
+    'netrc': 'netrc#module-netrc',
+    'nis': 'nis#module-nis',
+    'nntplib': 'nntplib#module-nntplib',
+    'numbers': 'numbers#module-numbers',
+    'operator': 'operator#module-operator',
+    'optparse': 'optparse#module-optparse',
+    'os': 'os#module-os',
+    'os.path': 'os.path#module-os.path',
+    'ossaudiodev': 'ossaudiodev#module-ossaudiodev',
+    'pathlib': 'pathlib#module-pathlib',
+    'pathlib.types': 'pathlib#module-pathlib.types',
+    'pdb': 'pdb#module-pdb',
+    'pickle': 'pickle#module-pickle',
+    'pickletools': 'pickletools#module-pickletools',
+    'pipes': 'pipes#module-pipes',
+    'pkgutil': 'pkgutil#module-pkgutil',
+    'platform': 'platform#module-platform',
+    'plistlib': 'plistlib#module-plistlib',
+    'poplib': 'poplib#module-poplib',
+    'posix': 'posix#module-posix',
+    'pprint': 'pprint#module-pprint',
+    'profile': 'profile#module-profile',
+    'pstats': 'profile#module-pstats',
+    'pty': 'pty#module-pty',
+    'pwd': 'pwd#module-pwd',
+    'py_compile': 'py_compile#module-py_compile',
+    'pyclbr': 'pyclbr#module-pyclbr',
+    'pydoc': 'pydoc#module-pydoc',
+    'queue': 'queue#module-queue',
+    'quopri': 'quopri#module-quopri',
+    'random': 'random#module-random',
+    're': 're#module-re',
+    'readline': 'readline#module-readline',
+    'reprlib': 'reprlib#module-reprlib',
+    'resource': 'resource#module-resource',
+    'rlcompleter': 'rlcompleter#module-rlcompleter',
+    'runpy': 'runpy#module-runpy',
+    'sched': 'sched#module-sched',
+    'secrets': 'secrets#module-secrets',
+    'select': 'select#module-select',
+    'selectors': 'selectors#module-selectors',
+    'shelve': 'shelve#module-shelve',
+    'shlex': 'shlex#module-shlex',
+    'shutil': 'shutil#module-shutil',
+    'signal': 'signal#module-signal',
+    'site': 'site#module-site',
+    'sitecustomize': 'site#module-sitecustomize',
+    'smtpd': 'smtpd#module-smtpd',
+    'smtplib': 'smtplib#module-smtplib',
+    'sndhdr': 'sndhdr#module-sndhdr',
+    'socket': 'socket#module-socket',
+    'socketserver': 'socketserver#module-socketserver',
+    'spwd': 'spwd#module-spwd',
+    'sqlite3': 'sqlite3#module-sqlite3',
+    'ssl': 'ssl#module-ssl',
+    'stat': 'stat#module-stat',
+    'statistics': 'statistics#module-statistics',
+    'string': 'string#module-string',
+    'string.templatelib': 'string.templatelib#module-string.templatelib',
+    'stringprep': 'stringprep#module-stringprep',
+    'struct': 'struct#module-struct',
+    'subprocess': 'subprocess#module-subprocess',
+    'sunau': 'sunau#module-sunau',
+    'symtable': 'symtable#module-symtable',
+    'sys': 'sys#module-sys',
+    'sys.monitoring': 'sys.monitoring#module-sys.monitoring',
+    'sysconfig': 'sysconfig#module-sysconfig',
+    'syslog': 'syslog#module-syslog',
+    'tabnanny': 'tabnanny#module-tabnanny',
+    'tarfile': 'tarfile#module-tarfile',
+    'telnetlib': 'telnetlib#module-telnetlib',
+    'tempfile': 'tempfile#module-tempfile',
+    'termios': 'termios#module-termios',
+    'test': 'test#module-test',
+    'test.regrtest': 'test#module-test.regrtest',
+    'test.support': 'test#module-test.support',
+    'test.support.bytecode_helper': 'test#module-test.support.bytecode_helper',
+    'test.support.import_helper': 'test#module-test.support.import_helper',
+    'test.support.os_helper': 'test#module-test.support.os_helper',
+    'test.support.script_helper': 'test#module-test.support.script_helper',
+    'test.support.socket_helper': 'test#module-test.support.socket_helper',
+    'test.support.threading_helper': 'test#module-test.support.threading_helper',
+    'test.support.warnings_helper': 'test#module-test.support.warnings_helper',
+    'textwrap': 'textwrap#module-textwrap',
+    'threading': 'threading#module-threading',
+    'time': 'time#module-time',
+    'timeit': 'timeit#module-timeit',
+    'tkinter': 'tkinter#module-tkinter',
+    'tkinter.colorchooser': 'tkinter.colorchooser#module-tkinter.colorchooser',
+    'tkinter.commondialog': 'dialog#module-tkinter.commondialog',
+    'tkinter.dnd': 'tkinter.dnd#module-tkinter.dnd',
+    'tkinter.filedialog': 'dialog#module-tkinter.filedialog',
+    'tkinter.font': 'tkinter.font#module-tkinter.font',
+    'tkinter.messagebox': 'tkinter.messagebox#module-tkinter.messagebox',
+    'tkinter.scrolledtext': 'tkinter.scrolledtext#module-tkinter.scrolledtext',
+    'tkinter.simpledialog': 'dialog#module-tkinter.simpledialog',
+    'tkinter.ttk': 'tkinter.ttk#module-tkinter.ttk',
+    'token': 'token#module-token',
+    'tokenize': 'tokenize#module-tokenize',
+    'tomllib': 'tomllib#module-tomllib',
+    'trace': 'trace#module-trace',
+    'traceback': 'traceback#module-traceback',
+    'tracemalloc': 'tracemalloc#module-tracemalloc',
+    'tty': 'tty#module-tty',
+    'turtle': 'turtle#module-turtle',
+    'turtledemo': 'turtle#module-turtledemo',
+    'types': 'types#module-types',
+    'typing': 'typing#module-typing',
+    'unicodedata': 'unicodedata#module-unicodedata',
+    'unittest': 'unittest#module-unittest',
+    'unittest.mock': 'unittest.mock#module-unittest.mock',
+    'urllib': 'urllib#module-urllib',
+    'urllib.error': 'urllib.error#module-urllib.error',
+    'urllib.parse': 'urllib.parse#module-urllib.parse',
+    'urllib.request': 'urllib.request#module-urllib.request',
+    'urllib.response': 'urllib.request#module-urllib.response',
+    'urllib.robotparser': 'urllib.robotparser#module-urllib.robotparser',
+    'usercustomize': 'site#module-usercustomize',
+    'uu': 'uu#module-uu',
+    'uuid': 'uuid#module-uuid',
+    'venv': 'venv#module-venv',
+    'warnings': 'warnings#module-warnings',
+    'wave': 'wave#module-wave',
+    'weakref': 'weakref#module-weakref',
+    'webbrowser': 'webbrowser#module-webbrowser',
+    'winreg': 'winreg#module-winreg',
+    'winsound': 'winsound#module-winsound',
+    'wsgiref': 'wsgiref#module-wsgiref',
+    'wsgiref.handlers': 'wsgiref#module-wsgiref.handlers',
+    'wsgiref.headers': 'wsgiref#module-wsgiref.headers',
+    'wsgiref.simple_server': 'wsgiref#module-wsgiref.simple_server',
+    'wsgiref.types': 'wsgiref#module-wsgiref.types',
+    'wsgiref.util': 'wsgiref#module-wsgiref.util',
+    'wsgiref.validate': 'wsgiref#module-wsgiref.validate',
+    'xdrlib': 'xdrlib#module-xdrlib',
+    'xml': 'xml#module-xml',
+    'xml.dom': 'xml.dom#module-xml.dom',
+    'xml.dom.minidom': 'xml.dom.minidom#module-xml.dom.minidom',
+    'xml.dom.pulldom': 'xml.dom.pulldom#module-xml.dom.pulldom',
+    'xml.etree.ElementInclude': 'xml.etree.elementtree#module-xml.etree.ElementInclude',
+    'xml.etree.ElementTree': 'xml.etree.elementtree#module-xml.etree.ElementTree',
+    'xml.parsers.expat': 'pyexpat#module-xml.parsers.expat',
+    'xml.parsers.expat.errors': 'pyexpat#module-xml.parsers.expat.errors',
+    'xml.parsers.expat.model': 'pyexpat#module-xml.parsers.expat.model',
+    'xml.sax': 'xml.sax#module-xml.sax',
+    'xml.sax.handler': 'xml.sax.handler#module-xml.sax.handler',
+    'xml.sax.saxutils': 'xml.sax.utils#module-xml.sax.saxutils',
+    'xml.sax.xmlreader': 'xml.sax.reader#module-xml.sax.xmlreader',
+    'xmlrpc': 'xmlrpc#module-xmlrpc',
+    'xmlrpc.client': 'xmlrpc.client#module-xmlrpc.client',
+    'xmlrpc.server': 'xmlrpc.server#module-xmlrpc.server',
+    'zipapp': 'zipapp#module-zipapp',
+    'zipfile': 'zipfile#module-zipfile',
+    'zipimport': 'zipimport#module-zipimport',
+    'zlib': 'zlib#module-zlib',
+    'zoneinfo': 'zoneinfo#module-zoneinfo',
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/topics.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/topics.py
new file mode 100644
index 0000000000000000000000000000000000000000..6dca99ce9b1c7ad68c4b8c0f36f64fcf179ff429
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/pydoc_data/topics.py
@@ -0,0 +1,14506 @@
+# Autogenerated by Sphinx on Tue Apr  7 16:13:12 2026
+# as part of the release process.
+
+topics = {
+    'assert': r'''The "assert" statement
+**********************
+
+Assert statements are a convenient way to insert debugging assertions
+into a program:
+
+   assert_stmt: "assert" expression ["," expression]
+
+The simple form, "assert expression", is equivalent to
+
+   if __debug__:
+       if not expression: raise AssertionError
+
+The extended form, "assert expression1, expression2", is equivalent to
+
+   if __debug__:
+       if not expression1: raise AssertionError(expression2)
+
+These equivalences assume that "__debug__" and "AssertionError" refer
+to the built-in variables with those names.  In the current
+implementation, the built-in variable "__debug__" is "True" under
+normal circumstances, "False" when optimization is requested (command
+line option "-O").  The current code generator emits no code for an
+"assert" statement when optimization is requested at compile time.
+Note that it is unnecessary to include the source code for the
+expression that failed in the error message; it will be displayed as
+part of the stack trace.
+
+Assignments to "__debug__" are illegal.  The value for the built-in
+variable is determined when the interpreter starts.
+''',
+    'assignment': r'''Assignment statements
+*********************
+
+Assignment statements are used to (re)bind names to values and to
+modify attributes or items of mutable objects:
+
+   assignment_stmt: (target_list "=")+ (starred_expression | yield_expression)
+   target_list:     target ("," target)* [","]
+   target:          identifier
+                    | "(" [target_list] ")"
+                    | "[" [target_list] "]"
+                    | attributeref
+                    | subscription
+                    | "*" target
+
+(See section Primaries for the syntax definitions for *attributeref*
+and *subscription*.)
+
+An assignment statement evaluates the expression list (remember that
+this can be a single expression or a comma-separated list, the latter
+yielding a tuple) and assigns the single resulting object to each of
+the target lists, from left to right.
+
+Assignment is defined recursively depending on the form of the target
+(list). When a target is part of a mutable object (an attribute
+reference or subscription), the mutable object must ultimately perform
+the assignment and decide about its validity, and may raise an
+exception if the assignment is unacceptable.  The rules observed by
+various types and the exceptions raised are given with the definition
+of the object types (see section The standard type hierarchy).
+
+Assignment of an object to a target list, optionally enclosed in
+parentheses or square brackets, is recursively defined as follows.
+
+* If the target list is a single target with no trailing comma,
+  optionally in parentheses, the object is assigned to that target.
+
+* Else:
+
+  * If the target list contains one target prefixed with an asterisk,
+    called a “starred” target: The object must be an iterable with at
+    least as many items as there are targets in the target list, minus
+    one.  The first items of the iterable are assigned, from left to
+    right, to the targets before the starred target.  The final items
+    of the iterable are assigned to the targets after the starred
+    target.  A list of the remaining items in the iterable is then
+    assigned to the starred target (the list can be empty).
+
+  * Else: The object must be an iterable with the same number of items
+    as there are targets in the target list, and the items are
+    assigned, from left to right, to the corresponding targets.
+
+Assignment of an object to a single target is recursively defined as
+follows.
+
+* If the target is an identifier (name):
+
+  * If the name does not occur in a "global" or "nonlocal" statement
+    in the current code block: the name is bound to the object in the
+    current local namespace.
+
+  * Otherwise: the name is bound to the object in the global namespace
+    or the outer namespace determined by "nonlocal", respectively.
+
+  The name is rebound if it was already bound.  This may cause the
+  reference count for the object previously bound to the name to reach
+  zero, causing the object to be deallocated and its destructor (if it
+  has one) to be called.
+
+* If the target is an attribute reference: The primary expression in
+  the reference is evaluated.  It should yield an object with
+  assignable attributes; if this is not the case, "TypeError" is
+  raised.  That object is then asked to assign the assigned object to
+  the given attribute; if it cannot perform the assignment, it raises
+  an exception (usually but not necessarily "AttributeError").
+
+  Note: If the object is a class instance and the attribute reference
+  occurs on both sides of the assignment operator, the right-hand side
+  expression, "a.x" can access either an instance attribute or (if no
+  instance attribute exists) a class attribute.  The left-hand side
+  target "a.x" is always set as an instance attribute, creating it if
+  necessary.  Thus, the two occurrences of "a.x" do not necessarily
+  refer to the same attribute: if the right-hand side expression
+  refers to a class attribute, the left-hand side creates a new
+  instance attribute as the target of the assignment:
+
+     class Cls:
+         x = 3             # class variable
+     inst = Cls()
+     inst.x = inst.x + 1   # writes inst.x as 4 leaving Cls.x as 3
+
+  This description does not necessarily apply to descriptor
+  attributes, such as properties created with "property()".
+
+* If the target is a subscription: The primary expression in the
+  reference is evaluated. Next, the subscript expression is evaluated.
+  Then, the primary’s "__setitem__()" method is called with two
+  arguments: the subscript and the assigned object.
+
+  Typically, "__setitem__()" is defined on mutable sequence objects
+  (such as lists) and mapping objects (such as dictionaries), and
+  behaves as follows.
+
+  If the primary is a mutable sequence object (such as a list), the
+  subscript must yield an integer.  If it is negative, the sequence’s
+  length is added to it.  The resulting value must be a nonnegative
+  integer less than the sequence’s length, and the sequence is asked
+  to assign the assigned object to its item with that index.  If the
+  index is out of range, "IndexError" is raised (assignment to a
+  subscripted sequence cannot add new items to a list).
+
+  If the primary is a mapping object (such as a dictionary), the
+  subscript must have a type compatible with the mapping’s key type,
+  and the mapping is then asked to create a key/value pair which maps
+  the subscript to the assigned object.  This can either replace an
+  existing key/value pair with the same key value, or insert a new
+  key/value pair (if no key with the same value existed).
+
+  If the target is a slicing: The primary expression should evaluate
+  to a mutable sequence object (such as a list). The assigned object
+  should be *iterable*. The slicing’s lower and upper bounds should be
+  integers; if they are "None" (or not present), the defaults are zero
+  and the sequence’s length. If either bound is negative, the
+  sequence’s length is added to it.  The resulting bounds are clipped
+  to lie between zero and the sequence’s length, inclusive.  Finally,
+  the sequence object is asked to replace the slice with the items of
+  the assigned sequence.  The length of the slice may be different
+  from the length of the assigned sequence, thus changing the length
+  of the target sequence, if the target sequence allows it.
+
+Although the definition of assignment implies that overlaps between
+the left-hand side and the right-hand side are ‘simultaneous’ (for
+example "a, b = b, a" swaps two variables), overlaps *within* the
+collection of assigned-to variables occur left-to-right, sometimes
+resulting in confusion.  For instance, the following program prints
+"[0, 2]":
+
+   x = [0, 1]
+   i = 0
+   i, x[i] = 1, 2         # i is updated, then x[i] is updated
+   print(x)
+
+See also:
+
+  **PEP 3132** - Extended Iterable Unpacking
+     The specification for the "*target" feature.
+
+
+Augmented assignment statements
+===============================
+
+Augmented assignment is the combination, in a single statement, of a
+binary operation and an assignment statement:
+
+   augmented_assignment_stmt: augtarget augop (expression_list | yield_expression)
+   augtarget:                 identifier | attributeref | subscription
+   augop:                     "+=" | "-=" | "*=" | "@=" | "/=" | "//=" | "%=" | "**="
+                              | ">>=" | "<<=" | "&=" | "^=" | "|="
+
+(See section Primaries for the syntax definitions of the last three
+symbols.)
+
+An augmented assignment evaluates the target (which, unlike normal
+assignment statements, cannot be an unpacking) and the expression
+list, performs the binary operation specific to the type of assignment
+on the two operands, and assigns the result to the original target.
+The target is only evaluated once.
+
+An augmented assignment statement like "x += 1" can be rewritten as "x
+= x + 1" to achieve a similar, but not exactly equal effect. In the
+augmented version, "x" is only evaluated once. Also, when possible,
+the actual operation is performed *in-place*, meaning that rather than
+creating a new object and assigning that to the target, the old object
+is modified instead.
+
+Unlike normal assignments, augmented assignments evaluate the left-
+hand side *before* evaluating the right-hand side.  For example, "a[i]
++= f(x)" first looks-up "a[i]", then it evaluates "f(x)" and performs
+the addition, and lastly, it writes the result back to "a[i]".
+
+With the exception of assigning to tuples and multiple targets in a
+single statement, the assignment done by augmented assignment
+statements is handled the same way as normal assignments. Similarly,
+with the exception of the possible *in-place* behavior, the binary
+operation performed by augmented assignment is the same as the normal
+binary operations.
+
+For targets which are attribute references, the same caveat about
+class and instance attributes applies as for regular assignments.
+
+
+Annotated assignment statements
+===============================
+
+*Annotation* assignment is the combination, in a single statement, of
+a variable or attribute annotation and an optional assignment
+statement:
+
+   annotated_assignment_stmt: augtarget ":" expression
+                              ["=" (starred_expression | yield_expression)]
+
+The difference from normal Assignment statements is that only a single
+target is allowed.
+
+The assignment target is considered “simple” if it consists of a
+single name that is not enclosed in parentheses. For simple assignment
+targets, if in class or module scope, the annotations are gathered in
+a lazily evaluated annotation scope. The annotations can be evaluated
+using the "__annotations__" attribute of a class or module, or using
+the facilities in the "annotationlib" module.
+
+If the assignment target is not simple (an attribute, subscript node,
+or parenthesized name), the annotation is never evaluated.
+
+If a name is annotated in a function scope, then this name is local
+for that scope. Annotations are never evaluated and stored in function
+scopes.
+
+If the right hand side is present, an annotated assignment performs
+the actual assignment as if there was no annotation present. If the
+right hand side is not present for an expression target, then the
+interpreter evaluates the target except for the last "__setitem__()"
+or "__setattr__()" call.
+
+See also:
+
+  **PEP 526** - Syntax for Variable Annotations
+     The proposal that added syntax for annotating the types of
+     variables (including class variables and instance variables),
+     instead of expressing them through comments.
+
+  **PEP 484** - Type hints
+     The proposal that added the "typing" module to provide a standard
+     syntax for type annotations that can be used in static analysis
+     tools and IDEs.
+
+Changed in version 3.8: Now annotated assignments allow the same
+expressions in the right hand side as regular assignments. Previously,
+some expressions (like un-parenthesized tuple expressions) caused a
+syntax error.
+
+Changed in version 3.14: Annotations are now lazily evaluated in a
+separate annotation scope. If the assignment target is not simple,
+annotations are never evaluated.
+''',
+    'assignment-expressions': r'''Assignment expressions
+**********************
+
+   assignment_expression: [identifier ":="] expression
+
+An assignment expression (sometimes also called a “named expression”
+or “walrus”) assigns an "expression" to an "identifier", while also
+returning the value of the "expression".
+
+One common use case is when handling matched regular expressions:
+
+   if matching := pattern.search(data):
+       do_something(matching)
+
+Or, when processing a file stream in chunks:
+
+   while chunk := file.read(9000):
+       process(chunk)
+
+Assignment expressions must be surrounded by parentheses when used as
+expression statements and when used as sub-expressions in slicing,
+conditional, lambda, keyword-argument, and comprehension-if
+expressions and in "assert", "with", and "assignment" statements. In
+all other places where they can be used, parentheses are not required,
+including in "if" and "while" statements.
+
+Added in version 3.8: See **PEP 572** for more details about
+assignment expressions.
+''',
+    'async': r'''Coroutines
+**********
+
+Added in version 3.5.
+
+
+Coroutine function definition
+=============================
+
+   async_funcdef: [decorators] "async" "def" funcname "(" [parameter_list] ")"
+                  ["->" expression] ":" suite
+
+Execution of Python coroutines can be suspended and resumed at many
+points (see *coroutine*). "await" expressions, "async for" and "async
+with" can only be used in the body of a coroutine function.
+
+Functions defined with "async def" syntax are always coroutine
+functions, even if they do not contain "await" or "async" keywords.
+
+It is a "SyntaxError" to use a "yield from" expression inside the body
+of a coroutine function.
+
+An example of a coroutine function:
+
+   async def func(param1, param2):
+       do_stuff()
+       await some_coroutine()
+
+Changed in version 3.7: "await" and "async" are now keywords;
+previously they were only treated as such inside the body of a
+coroutine function.
+
+
+The "async for" statement
+=========================
+
+   async_for_stmt: "async" for_stmt
+
+An *asynchronous iterable* provides an "__aiter__" method that
+directly returns an *asynchronous iterator*, which can call
+asynchronous code in its "__anext__" method.
+
+The "async for" statement allows convenient iteration over
+asynchronous iterables.
+
+The following code:
+
+   async for TARGET in ITER:
+       SUITE
+   else:
+       SUITE2
+
+Is semantically equivalent to:
+
+   iter = (ITER).__aiter__()
+   running = True
+
+   while running:
+       try:
+           TARGET = await iter.__anext__()
+       except StopAsyncIteration:
+           running = False
+       else:
+           SUITE
+   else:
+       SUITE2
+
+except that implicit special method lookup is used for "__aiter__()"
+and "__anext__()".
+
+It is a "SyntaxError" to use an "async for" statement outside the body
+of a coroutine function.
+
+
+The "async with" statement
+==========================
+
+   async_with_stmt: "async" with_stmt
+
+An *asynchronous context manager* is a *context manager* that is able
+to suspend execution in its *enter* and *exit* methods.
+
+The following code:
+
+   async with EXPRESSION as TARGET:
+       SUITE
+
+is semantically equivalent to:
+
+   manager = (EXPRESSION)
+   aenter = manager.__aenter__
+   aexit = manager.__aexit__
+   value = await aenter()
+   hit_except = False
+
+   try:
+       TARGET = value
+       SUITE
+   except:
+       hit_except = True
+       if not await aexit(*sys.exc_info()):
+           raise
+   finally:
+       if not hit_except:
+           await aexit(None, None, None)
+
+except that implicit special method lookup is used for "__aenter__()"
+and "__aexit__()".
+
+It is a "SyntaxError" to use an "async with" statement outside the
+body of a coroutine function.
+
+See also:
+
+  **PEP 492** - Coroutines with async and await syntax
+     The proposal that made coroutines a proper standalone concept in
+     Python, and added supporting syntax.
+''',
+    'atom-identifiers': r'''Identifiers (Names)
+*******************
+
+An identifier occurring as an atom is a name.  See section Names
+(identifiers and keywords) for lexical definition and section Naming
+and binding for documentation of naming and binding.
+
+When the name is bound to an object, evaluation of the atom yields
+that object. When a name is not bound, an attempt to evaluate it
+raises a "NameError" exception.
+
+
+Private name mangling
+=====================
+
+When an identifier that textually occurs in a class definition begins
+with two or more underscore characters and does not end in two or more
+underscores, it is considered a *private name* of that class.
+
+See also: The class specifications.
+
+More precisely, private names are transformed to a longer form before
+code is generated for them.  If the transformed name is longer than
+255 characters, implementation-defined truncation may happen.
+
+The transformation is independent of the syntactical context in which
+the identifier is used but only the following private identifiers are
+mangled:
+
+* Any name used as the name of a variable that is assigned or read or
+  any name of an attribute being accessed.
+
+  The "__name__" attribute of nested functions, classes, and type
+  aliases is however not mangled.
+
+* The name of imported modules, e.g., "__spam" in "import __spam". If
+  the module is part of a package (i.e., its name contains a dot), the
+  name is *not* mangled, e.g., the "__foo" in "import __foo.bar" is
+  not mangled.
+
+* The name of an imported member, e.g., "__f" in "from spam import
+  __f".
+
+The transformation rule is defined as follows:
+
+* The class name, with leading underscores removed and a single
+  leading underscore inserted, is inserted in front of the identifier,
+  e.g., the identifier "__spam" occurring in a class named "Foo",
+  "_Foo" or "__Foo" is transformed to "_Foo__spam".
+
+* If the class name consists only of underscores, the transformation
+  is the identity, e.g., the identifier "__spam" occurring in a class
+  named "_" or "__" is left as is.
+''',
+    'atom-literals': r'''Literals
+********
+
+A *literal* is a textual representation of a value. Python supports
+numeric, string and bytes literals. Format strings and template
+strings are treated as string literals.
+
+Numeric literals consist of a single "NUMBER" token, which names an
+integer, floating-point number, or an imaginary number. See the
+Numeric literals section in Lexical analysis documentation for
+details.
+
+String and bytes literals may consist of several tokens. See section
+String literal concatenation for details.
+
+Note that negative and complex numbers, like "-3" or "3+4.2j", are
+syntactically not literals, but unary or binary arithmetic operations
+involving the "-" or "+" operator.
+
+Evaluation of a literal yields an object of the given type ("int",
+"float", "complex", "str", "bytes", or "Template") with the given
+value. The value may be approximated in the case of floating-point and
+imaginary literals.
+
+The formal grammar for literals is:
+
+   literal: strings | NUMBER
+
+
+Literals and object identity
+============================
+
+All literals correspond to immutable data types, and hence the
+object’s identity is less important than its value.  Multiple
+evaluations of literals with the same value (either the same
+occurrence in the program text or a different occurrence) may obtain
+the same object or a different object with the same value.
+
+CPython implementation detail: For example, in CPython, *small*
+integers with the same value evaluate to the same object:
+
+   >>> x = 7
+   >>> y = 7
+   >>> x is y
+   True
+
+However, large integers evaluate to different objects:
+
+   >>> x = 123456789
+   >>> y = 123456789
+   >>> x is y
+   False
+
+This behavior may change in future versions of CPython. In particular,
+the boundary between “small” and “large” integers has already changed
+in the past.CPython will emit a "SyntaxWarning" when you compare
+literals using "is":
+
+   >>> x = 7
+   >>> x is 7
+   <input>:1: SyntaxWarning: "is" with 'int' literal. Did you mean "=="?
+   True
+
+See When can I rely on identity tests with the is operator? for more
+information.
+
+Template strings are immutable but may reference mutable objects as
+"Interpolation" values. For the purposes of this section, two
+t-strings have the “same value” if both their structure and the
+*identity* of the values match.
+
+**CPython implementation detail:** Currently, each evaluation of a
+template string results in a different object.
+
+
+String literal concatenation
+============================
+
+Multiple adjacent string or bytes literals, possibly using different
+quoting conventions, are allowed, and their meaning is the same as
+their concatenation:
+
+   >>> "hello" 'world'
+   "helloworld"
+
+This feature is defined at the syntactical level, so it only works
+with literals. To concatenate string expressions at run time, the ‘+’
+operator may be used:
+
+   >>> greeting = "Hello"
+   >>> space = " "
+   >>> name = "Blaise"
+   >>> print(greeting + space + name)   # not: print(greeting space name)
+   Hello Blaise
+
+Literal concatenation can freely mix raw strings, triple-quoted
+strings, and formatted string literals. For example:
+
+   >>> "Hello" r', ' f"{name}!"
+   "Hello, Blaise!"
+
+This feature can be used to reduce the number of backslashes needed,
+to split long strings conveniently across long lines, or even to add
+comments to parts of strings. For example:
+
+   re.compile("[A-Za-z_]"       # letter or underscore
+              "[A-Za-z0-9_]*"   # letter, digit or underscore
+             )
+
+However, bytes literals may only be combined with other byte literals;
+not with string literals of any kind. Also, template string literals
+may only be combined with other template string literals:
+
+   >>> t"Hello" t"{name}!"
+   Template(strings=('Hello', '!'), interpolations=(...))
+
+Formally:
+
+   strings: (STRING | fstring)+ | tstring+
+''',
+    'attribute-access': r'''Customizing attribute access
+****************************
+
+The following methods can be defined to customize the meaning of
+attribute access (use of, assignment to, or deletion of "x.name") for
+class instances.
+
+object.__getattr__(self, name)
+
+   Called when the default attribute access fails with an
+   "AttributeError" (either "__getattribute__()" raises an
+   "AttributeError" because *name* is not an instance attribute or an
+   attribute in the class tree for "self"; or "__get__()" of a *name*
+   property raises "AttributeError").  This method should either
+   return the (computed) attribute value or raise an "AttributeError"
+   exception. The "object" class itself does not provide this method.
+
+   Note that if the attribute is found through the normal mechanism,
+   "__getattr__()" is not called.  (This is an intentional asymmetry
+   between "__getattr__()" and "__setattr__()".) This is done both for
+   efficiency reasons and because otherwise "__getattr__()" would have
+   no way to access other attributes of the instance.  Note that at
+   least for instance variables, you can take total control by not
+   inserting any values in the instance attribute dictionary (but
+   instead inserting them in another object).  See the
+   "__getattribute__()" method below for a way to actually get total
+   control over attribute access.
+
+object.__getattribute__(self, name)
+
+   Called unconditionally to implement attribute accesses for
+   instances of the class. If the class also defines "__getattr__()",
+   the latter will not be called unless "__getattribute__()" either
+   calls it explicitly or raises an "AttributeError". This method
+   should return the (computed) attribute value or raise an
+   "AttributeError" exception. In order to avoid infinite recursion in
+   this method, its implementation should always call the base class
+   method with the same name to access any attributes it needs, for
+   example, "object.__getattribute__(self, name)".
+
+   Note:
+
+     This method may still be bypassed when looking up special methods
+     as the result of implicit invocation via language syntax or
+     built-in functions. See Special method lookup.
+
+   For certain sensitive attribute accesses, raises an auditing event
+   "object.__getattr__" with arguments "obj" and "name".
+
+object.__setattr__(self, name, value)
+
+   Called when an attribute assignment is attempted.  This is called
+   instead of the normal mechanism (i.e. store the value in the
+   instance dictionary). *name* is the attribute name, *value* is the
+   value to be assigned to it.
+
+   If "__setattr__()" wants to assign to an instance attribute, it
+   should call the base class method with the same name, for example,
+   "object.__setattr__(self, name, value)".
+
+   For certain sensitive attribute assignments, raises an auditing
+   event "object.__setattr__" with arguments "obj", "name", "value".
+
+object.__delattr__(self, name)
+
+   Like "__setattr__()" but for attribute deletion instead of
+   assignment.  This should only be implemented if "del obj.name" is
+   meaningful for the object.
+
+   For certain sensitive attribute deletions, raises an auditing event
+   "object.__delattr__" with arguments "obj" and "name".
+
+object.__dir__(self)
+
+   Called when "dir()" is called on the object. An iterable must be
+   returned. "dir()" converts the returned iterable to a list and
+   sorts it.
+
+
+Customizing module attribute access
+===================================
+
+module.__getattr__()
+module.__dir__()
+
+Special names "__getattr__" and "__dir__" can be also used to
+customize access to module attributes. The "__getattr__" function at
+the module level should accept one argument which is the name of an
+attribute and return the computed value or raise an "AttributeError".
+If an attribute is not found on a module object through the normal
+lookup, i.e. "object.__getattribute__()", then "__getattr__" is
+searched in the module "__dict__" before raising an "AttributeError".
+If found, it is called with the attribute name and the result is
+returned.
+
+The "__dir__" function should accept no arguments, and return an
+iterable of strings that represents the names accessible on module. If
+present, this function overrides the standard "dir()" search on a
+module.
+
+module.__class__
+
+For a more fine grained customization of the module behavior (setting
+attributes, properties, etc.), one can set the "__class__" attribute
+of a module object to a subclass of "types.ModuleType". For example:
+
+   import sys
+   from types import ModuleType
+
+   class VerboseModule(ModuleType):
+       def __repr__(self):
+           return f'Verbose {self.__name__}'
+
+       def __setattr__(self, attr, value):
+           print(f'Setting {attr}...')
+           super().__setattr__(attr, value)
+
+   sys.modules[__name__].__class__ = VerboseModule
+
+Note:
+
+  Defining module "__getattr__" and setting module "__class__" only
+  affect lookups made using the attribute access syntax – directly
+  accessing the module globals (whether by code within the module, or
+  via a reference to the module’s globals dictionary) is unaffected.
+
+Changed in version 3.5: "__class__" module attribute is now writable.
+
+Added in version 3.7: "__getattr__" and "__dir__" module attributes.
+
+See also:
+
+  **PEP 562** - Module __getattr__ and __dir__
+     Describes the "__getattr__" and "__dir__" functions on modules.
+
+
+Implementing Descriptors
+========================
+
+The following methods only apply when an instance of the class
+containing the method (a so-called *descriptor* class) appears in an
+*owner* class (the descriptor must be in either the owner’s class
+dictionary or in the class dictionary for one of its parents).  In the
+examples below, “the attribute” refers to the attribute whose name is
+the key of the property in the owner class’ "__dict__".  The "object"
+class itself does not implement any of these protocols.
+
+object.__get__(self, instance, owner=None)
+
+   Called to get the attribute of the owner class (class attribute
+   access) or of an instance of that class (instance attribute
+   access). The optional *owner* argument is the owner class, while
+   *instance* is the instance that the attribute was accessed through,
+   or "None" when the attribute is accessed through the *owner*.
+
+   This method should return the computed attribute value or raise an
+   "AttributeError" exception.
+
+   **PEP 252** specifies that "__get__()" is callable with one or two
+   arguments.  Python’s own built-in descriptors support this
+   specification; however, it is likely that some third-party tools
+   have descriptors that require both arguments.  Python’s own
+   "__getattribute__()" implementation always passes in both arguments
+   whether they are required or not.
+
+object.__set__(self, instance, value)
+
+   Called to set the attribute on an instance *instance* of the owner
+   class to a new value, *value*.
+
+   Note, adding "__set__()" or "__delete__()" changes the kind of
+   descriptor to a “data descriptor”.  See Invoking Descriptors for
+   more details.
+
+object.__delete__(self, instance)
+
+   Called to delete the attribute on an instance *instance* of the
+   owner class.
+
+Instances of descriptors may also have the "__objclass__" attribute
+present:
+
+object.__objclass__
+
+   The attribute "__objclass__" is interpreted by the "inspect" module
+   as specifying the class where this object was defined (setting this
+   appropriately can assist in runtime introspection of dynamic class
+   attributes). For callables, it may indicate that an instance of the
+   given type (or a subclass) is expected or required as the first
+   positional argument (for example, CPython sets this attribute for
+   unbound methods that are implemented in C).
+
+
+Invoking Descriptors
+====================
+
+In general, a descriptor is an object attribute with “binding
+behavior”, one whose attribute access has been overridden by methods
+in the descriptor protocol:  "__get__()", "__set__()", and
+"__delete__()". If any of those methods are defined for an object, it
+is said to be a descriptor.
+
+The default behavior for attribute access is to get, set, or delete
+the attribute from an object’s dictionary. For instance, "a.x" has a
+lookup chain starting with "a.__dict__['x']", then
+"type(a).__dict__['x']", and continuing through the base classes of
+"type(a)" excluding metaclasses.
+
+However, if the looked-up value is an object defining one of the
+descriptor methods, then Python may override the default behavior and
+invoke the descriptor method instead.  Where this occurs in the
+precedence chain depends on which descriptor methods were defined and
+how they were called.
+
+The starting point for descriptor invocation is a binding, "a.x". How
+the arguments are assembled depends on "a":
+
+Direct Call
+   The simplest and least common call is when user code directly
+   invokes a descriptor method:    "x.__get__(a)".
+
+Instance Binding
+   If binding to an object instance, "a.x" is transformed into the
+   call: "type(a).__dict__['x'].__get__(a, type(a))".
+
+Class Binding
+   If binding to a class, "A.x" is transformed into the call:
+   "A.__dict__['x'].__get__(None, A)".
+
+Super Binding
+   A dotted lookup such as "super(A, a).x" searches
+   "a.__class__.__mro__" for a base class "B" following "A" and then
+   returns "B.__dict__['x'].__get__(a, A)".  If not a descriptor, "x"
+   is returned unchanged.
+
+For instance bindings, the precedence of descriptor invocation depends
+on which descriptor methods are defined.  A descriptor can define any
+combination of "__get__()", "__set__()" and "__delete__()".  If it
+does not define "__get__()", then accessing the attribute will return
+the descriptor object itself unless there is a value in the object’s
+instance dictionary.  If the descriptor defines "__set__()" and/or
+"__delete__()", it is a data descriptor; if it defines neither, it is
+a non-data descriptor.  Normally, data descriptors define both
+"__get__()" and "__set__()", while non-data descriptors have just the
+"__get__()" method.  Data descriptors with "__get__()" and "__set__()"
+(and/or "__delete__()") defined always override a redefinition in an
+instance dictionary.  In contrast, non-data descriptors can be
+overridden by instances.
+
+Python methods (including those decorated with "@staticmethod" and
+"@classmethod") are implemented as non-data descriptors.  Accordingly,
+instances can redefine and override methods.  This allows individual
+instances to acquire behaviors that differ from other instances of the
+same class.
+
+The "property()" function is implemented as a data descriptor.
+Accordingly, instances cannot override the behavior of a property.
+
+
+__slots__
+=========
+
+*__slots__* allow us to explicitly declare data members (like
+properties) and deny the creation of "__dict__" and *__weakref__*
+(unless explicitly declared in *__slots__* or available in a parent.)
+
+The space saved over using "__dict__" can be significant. Attribute
+lookup speed can be significantly improved as well.
+
+object.__slots__
+
+   This class variable can be assigned a string, iterable, or sequence
+   of strings with variable names used by instances.  *__slots__*
+   reserves space for the declared variables and prevents the
+   automatic creation of "__dict__" and *__weakref__* for each
+   instance.
+
+Notes on using *__slots__*:
+
+* When inheriting from a class without *__slots__*, the "__dict__" and
+  *__weakref__* attribute of the instances will always be accessible.
+
+* Without a "__dict__" variable, instances cannot be assigned new
+  variables not listed in the *__slots__* definition.  Attempts to
+  assign to an unlisted variable name raises "AttributeError". If
+  dynamic assignment of new variables is desired, then add
+  "'__dict__'" to the sequence of strings in the *__slots__*
+  declaration.
+
+* Without a *__weakref__* variable for each instance, classes defining
+  *__slots__* do not support "weak references" to its instances. If
+  weak reference support is needed, then add "'__weakref__'" to the
+  sequence of strings in the *__slots__* declaration.
+
+* *__slots__* are implemented at the class level by creating
+  descriptors for each variable name.  As a result, class attributes
+  cannot be used to set default values for instance variables defined
+  by *__slots__*; otherwise, the class attribute would overwrite the
+  descriptor assignment.
+
+* The action of a *__slots__* declaration is not limited to the class
+  where it is defined.  *__slots__* declared in parents are available
+  in child classes. However, instances of a child subclass will get a
+  "__dict__" and *__weakref__* unless the subclass also defines
+  *__slots__* (which should only contain names of any *additional*
+  slots).
+
+* If a class defines a slot also defined in a base class, the instance
+  variable defined by the base class slot is inaccessible (except by
+  retrieving its descriptor directly from the base class). This
+  renders the meaning of the program undefined.  In the future, a
+  check may be added to prevent this.
+
+* "TypeError" will be raised if nonempty *__slots__* are defined for a
+  class derived from a ""variable-length" built-in type" such as
+  "int", "bytes", and "tuple".
+
+* Any non-string *iterable* may be assigned to *__slots__*.
+
+* If a "dictionary" is used to assign *__slots__*, the dictionary keys
+  will be used as the slot names. The values of the dictionary can be
+  used to provide per-attribute docstrings that will be recognised by
+  "inspect.getdoc()" and displayed in the output of "help()".
+
+* "__class__" assignment works only if both classes have the same
+  *__slots__*.
+
+* Multiple inheritance with multiple slotted parent classes can be
+  used, but only one parent is allowed to have attributes created by
+  slots (the other bases must have empty slot layouts) - violations
+  raise "TypeError".
+
+* If an *iterator* is used for *__slots__* then a *descriptor* is
+  created for each of the iterator’s values. However, the *__slots__*
+  attribute will be an empty iterator.
+''',
+    'attribute-references': r'''Attribute references
+********************
+
+An attribute reference is a primary followed by a period and a name:
+
+   attributeref: primary "." identifier
+
+The primary must evaluate to an object of a type that supports
+attribute references, which most objects do.  This object is then
+asked to produce the attribute whose name is the identifier. The type
+and value produced is determined by the object.  Multiple evaluations
+of the same attribute reference may yield different objects.
+
+This production can be customized by overriding the
+"__getattribute__()" method or the "__getattr__()" method.  The
+"__getattribute__()" method is called first and either returns a value
+or raises "AttributeError" if the attribute is not available.
+
+If an "AttributeError" is raised and the object has a "__getattr__()"
+method, that method is called as a fallback.
+''',
+    'augassign': r'''Augmented assignment statements
+*******************************
+
+Augmented assignment is the combination, in a single statement, of a
+binary operation and an assignment statement:
+
+   augmented_assignment_stmt: augtarget augop (expression_list | yield_expression)
+   augtarget:                 identifier | attributeref | subscription
+   augop:                     "+=" | "-=" | "*=" | "@=" | "/=" | "//=" | "%=" | "**="
+                              | ">>=" | "<<=" | "&=" | "^=" | "|="
+
+(See section Primaries for the syntax definitions of the last three
+symbols.)
+
+An augmented assignment evaluates the target (which, unlike normal
+assignment statements, cannot be an unpacking) and the expression
+list, performs the binary operation specific to the type of assignment
+on the two operands, and assigns the result to the original target.
+The target is only evaluated once.
+
+An augmented assignment statement like "x += 1" can be rewritten as "x
+= x + 1" to achieve a similar, but not exactly equal effect. In the
+augmented version, "x" is only evaluated once. Also, when possible,
+the actual operation is performed *in-place*, meaning that rather than
+creating a new object and assigning that to the target, the old object
+is modified instead.
+
+Unlike normal assignments, augmented assignments evaluate the left-
+hand side *before* evaluating the right-hand side.  For example, "a[i]
++= f(x)" first looks-up "a[i]", then it evaluates "f(x)" and performs
+the addition, and lastly, it writes the result back to "a[i]".
+
+With the exception of assigning to tuples and multiple targets in a
+single statement, the assignment done by augmented assignment
+statements is handled the same way as normal assignments. Similarly,
+with the exception of the possible *in-place* behavior, the binary
+operation performed by augmented assignment is the same as the normal
+binary operations.
+
+For targets which are attribute references, the same caveat about
+class and instance attributes applies as for regular assignments.
+''',
+    'await': r'''Await expression
+****************
+
+Suspend the execution of *coroutine* on an *awaitable* object. Can
+only be used inside a *coroutine function*.
+
+   await_expr: "await" primary
+
+Added in version 3.5.
+''',
+    'binary': r'''Binary arithmetic operations
+****************************
+
+The binary arithmetic operations have the conventional priority
+levels.  Note that some of these operations also apply to certain non-
+numeric types.  Apart from the power operator, there are only two
+levels, one for multiplicative operators and one for additive
+operators:
+
+   m_expr: u_expr | m_expr "*" u_expr | m_expr "@" m_expr |
+           m_expr "//" u_expr | m_expr "/" u_expr |
+           m_expr "%" u_expr
+   a_expr: m_expr | a_expr "+" m_expr | a_expr "-" m_expr
+
+The "*" (multiplication) operator yields the product of its arguments.
+The arguments must either both be numbers, or one argument must be an
+integer and the other must be a sequence. In the former case, the
+numbers are converted to a common real type and then multiplied
+together.  In the latter case, sequence repetition is performed; a
+negative repetition factor yields an empty sequence.
+
+This operation can be customized using the special "__mul__()" and
+"__rmul__()" methods.
+
+Changed in version 3.14: If only one operand is a complex number, the
+other operand is converted to a floating-point number.
+
+The "@" (at) operator is intended to be used for matrix
+multiplication.  No builtin Python types implement this operator.
+
+This operation can be customized using the special "__matmul__()" and
+"__rmatmul__()" methods.
+
+Added in version 3.5.
+
+The "/" (division) and "//" (floor division) operators yield the
+quotient of their arguments.  The numeric arguments are first
+converted to a common type. Division of integers yields a float, while
+floor division of integers results in an integer; the result is that
+of mathematical division with the ‘floor’ function applied to the
+result.  Division by zero raises the "ZeroDivisionError" exception.
+
+The division operation can be customized using the special
+"__truediv__()" and "__rtruediv__()" methods. The floor division
+operation can be customized using the special "__floordiv__()" and
+"__rfloordiv__()" methods.
+
+The "%" (modulo) operator yields the remainder from the division of
+the first argument by the second.  The numeric arguments are first
+converted to a common type. A zero right argument raises the
+"ZeroDivisionError" exception.  The arguments may be floating-point
+numbers, e.g., "3.14%0.7" equals "0.34" (since "3.14" equals "4*0.7 +
+0.34".)  The modulo operator always yields a result with the same sign
+as its second operand (or zero); the absolute value of the result is
+strictly smaller than the absolute value of the second operand [1].
+
+The floor division and modulo operators are connected by the following
+identity: "x == (x//y)*y + (x%y)".  Floor division and modulo are also
+connected with the built-in function "divmod()": "divmod(x, y) ==
+(x//y, x%y)". [2].
+
+In addition to performing the modulo operation on numbers, the "%"
+operator is also overloaded by string objects to perform old-style
+string formatting (also known as interpolation).  The syntax for
+string formatting is described in the Python Library Reference,
+section printf-style String Formatting.
+
+The *modulo* operation can be customized using the special "__mod__()"
+and "__rmod__()" methods.
+
+The floor division operator, the modulo operator, and the "divmod()"
+function are not defined for complex numbers.  Instead, convert to a
+floating-point number using the "abs()" function if appropriate.
+
+The "+" (addition) operator yields the sum of its arguments.  The
+arguments must either both be numbers or both be sequences of the same
+type.  In the former case, the numbers are converted to a common real
+type and then added together. In the latter case, the sequences are
+concatenated.
+
+This operation can be customized using the special "__add__()" and
+"__radd__()" methods.
+
+Changed in version 3.14: If only one operand is a complex number, the
+other operand is converted to a floating-point number.
+
+The "-" (subtraction) operator yields the difference of its arguments.
+The numeric arguments are first converted to a common real type.
+
+This operation can be customized using the special "__sub__()" and
+"__rsub__()" methods.
+
+Changed in version 3.14: If only one operand is a complex number, the
+other operand is converted to a floating-point number.
+''',
+    'bitwise': r'''Binary bitwise operations
+*************************
+
+Each of the three bitwise operations has a different priority level:
+
+   and_expr: shift_expr | and_expr "&" shift_expr
+   xor_expr: and_expr | xor_expr "^" and_expr
+   or_expr:  xor_expr | or_expr "|" xor_expr
+
+The "&" operator yields the bitwise AND of its arguments, which must
+be integers or one of them must be a custom object overriding
+"__and__()" or "__rand__()" special methods.
+
+The "^" operator yields the bitwise XOR (exclusive OR) of its
+arguments, which must be integers or one of them must be a custom
+object overriding "__xor__()" or "__rxor__()" special methods.
+
+The "|" operator yields the bitwise (inclusive) OR of its arguments,
+which must be integers or one of them must be a custom object
+overriding "__or__()" or "__ror__()" special methods.
+''',
+    'bltin-code-objects': r'''Code Objects
+************
+
+Code objects are used by the implementation to represent “pseudo-
+compiled” executable Python code such as a function body. They differ
+from function objects because they don’t contain a reference to their
+global execution environment.  Code objects are returned by the built-
+in "compile()" function and can be extracted from function objects
+through their "__code__" attribute. See also the "code" module.
+
+Accessing "__code__" raises an auditing event "object.__getattr__"
+with arguments "obj" and ""__code__"".
+
+A code object can be executed or evaluated by passing it (instead of a
+source string) to the "exec()" or "eval()"  built-in functions.
+
+See The standard type hierarchy for more information.
+''',
+    'bltin-ellipsis-object': r'''The Ellipsis Object
+*******************
+
+This object is commonly used to indicate that something is omitted. It
+supports no special operations.  There is exactly one ellipsis object,
+named "Ellipsis" (a built-in name).  "type(Ellipsis)()" produces the
+"Ellipsis" singleton.
+
+It is written as "Ellipsis" or "...".
+
+In typical use, "..." as the "Ellipsis" object appears in a few
+different places, for instance:
+
+* In type annotations, such as callable arguments or tuple elements.
+
+* As the body of a function instead of a pass statement.
+
+* In third-party libraries, such as Numpy’s slicing and striding.
+
+Python also uses three dots in ways that are not "Ellipsis" objects,
+for instance:
+
+* Doctest’s "ELLIPSIS", as a pattern for missing content.
+
+* The default Python prompt of the *interactive* shell when partial
+  input is incomplete.
+
+Lastly, the Python documentation often uses three dots in conventional
+English usage to mean omitted content, even in code examples that also
+use them as the "Ellipsis".
+''',
+    'bltin-null-object': r'''The Null Object
+***************
+
+This object is returned by functions that don’t explicitly return a
+value.  It supports no special operations.  There is exactly one null
+object, named "None" (a built-in name).  "type(None)()" produces the
+same singleton.
+
+It is written as "None".
+''',
+    'bltin-type-objects': r'''Type Objects
+************
+
+Type objects represent the various object types.  An object’s type is
+accessed by the built-in function "type()".  There are no special
+operations on types.  The standard module "types" defines names for
+all standard built-in types.
+
+Types are written like this: "<class 'int'>".
+''',
+    'booleans': r'''Boolean operations
+******************
+
+   or_test:  and_test | or_test "or" and_test
+   and_test: not_test | and_test "and" not_test
+   not_test: comparison | "not" not_test
+
+In the context of Boolean operations, and also when expressions are
+used by control flow statements, the following values are interpreted
+as false: "False", "None", numeric zero of all types, and empty
+strings and containers (including strings, tuples, lists,
+dictionaries, sets and frozensets).  All other values are interpreted
+as true.  User-defined objects can customize their truth value by
+providing a "__bool__()" method.
+
+The operator "not" yields "True" if its argument is false, "False"
+otherwise.
+
+The expression "x and y" first evaluates *x*; if *x* is false, its
+value is returned; otherwise, *y* is evaluated and the resulting value
+is returned.
+
+The expression "x or y" first evaluates *x*; if *x* is true, its value
+is returned; otherwise, *y* is evaluated and the resulting value is
+returned.
+
+Note that neither "and" nor "or" restrict the value and type they
+return to "False" and "True", but rather return the last evaluated
+argument.  This is sometimes useful, e.g., if "s" is a string that
+should be replaced by a default value if it is empty, the expression
+"s or 'foo'" yields the desired value.  Because "not" has to create a
+new value, it returns a boolean value regardless of the type of its
+argument (for example, "not 'foo'" produces "False" rather than "''".)
+''',
+    'break': r'''The "break" statement
+*********************
+
+   break_stmt: "break"
+
+"break" may only occur syntactically nested in a "for" or "while"
+loop, but not nested in a function or class definition within that
+loop.
+
+It terminates the nearest enclosing loop, skipping the optional "else"
+clause if the loop has one.
+
+If a "for" loop is terminated by "break", the loop control target
+keeps its current value.
+
+When "break" passes control out of a "try" statement with a "finally"
+clause, that "finally" clause is executed before really leaving the
+loop.
+''',
+    'callable-types': r'''Emulating callable objects
+**************************
+
+object.__call__(self[, args...])
+
+   Called when the instance is “called” as a function; if this method
+   is defined, "x(arg1, arg2, ...)" roughly translates to
+   "type(x).__call__(x, arg1, ...)". The "object" class itself does
+   not provide this method.
+''',
+    'calls': r'''Calls
+*****
+
+A call calls a callable object (e.g., a *function*) with a possibly
+empty series of *arguments*:
+
+   call:                 primary "(" [argument_list [","] | comprehension] ")"
+   argument_list:        positional_arguments ["," starred_and_keywords]
+                           ["," keywords_arguments]
+                         | starred_and_keywords ["," keywords_arguments]
+                         | keywords_arguments
+   positional_arguments: positional_item ("," positional_item)*
+   positional_item:      assignment_expression | "*" expression
+   starred_and_keywords: ("*" expression | keyword_item)
+                         ("," "*" expression | "," keyword_item)*
+   keywords_arguments:   (keyword_item | "**" expression)
+                         ("," keyword_item | "," "**" expression)*
+   keyword_item:         identifier "=" expression
+
+An optional trailing comma may be present after the positional and
+keyword arguments but does not affect the semantics.
+
+The primary must evaluate to a callable object (user-defined
+functions, built-in functions, methods of built-in objects, class
+objects, methods of class instances, and all objects having a
+"__call__()" method are callable).  All argument expressions are
+evaluated before the call is attempted.  Please refer to section
+Function definitions for the syntax of formal *parameter* lists.
+
+If keyword arguments are present, they are first converted to
+positional arguments, as follows.  First, a list of unfilled slots is
+created for the formal parameters.  If there are N positional
+arguments, they are placed in the first N slots.  Next, for each
+keyword argument, the identifier is used to determine the
+corresponding slot (if the identifier is the same as the first formal
+parameter name, the first slot is used, and so on).  If the slot is
+already filled, a "TypeError" exception is raised. Otherwise, the
+argument is placed in the slot, filling it (even if the expression is
+"None", it fills the slot).  When all arguments have been processed,
+the slots that are still unfilled are filled with the corresponding
+default value from the function definition.  (Default values are
+calculated, once, when the function is defined; thus, a mutable object
+such as a list or dictionary used as default value will be shared by
+all calls that don’t specify an argument value for the corresponding
+slot; this should usually be avoided.)  If there are any unfilled
+slots for which no default value is specified, a "TypeError" exception
+is raised.  Otherwise, the list of filled slots is used as the
+argument list for the call.
+
+**CPython implementation detail:** An implementation may provide
+built-in functions whose positional parameters do not have names, even
+if they are ‘named’ for the purpose of documentation, and which
+therefore cannot be supplied by keyword.  In CPython, this is the case
+for functions implemented in C that use "PyArg_ParseTuple()" to parse
+their arguments.
+
+If there are more positional arguments than there are formal parameter
+slots, a "TypeError" exception is raised, unless a formal parameter
+using the syntax "*identifier" is present; in this case, that formal
+parameter receives a tuple containing the excess positional arguments
+(or an empty tuple if there were no excess positional arguments).
+
+If any keyword argument does not correspond to a formal parameter
+name, a "TypeError" exception is raised, unless a formal parameter
+using the syntax "**identifier" is present; in this case, that formal
+parameter receives a dictionary containing the excess keyword
+arguments (using the keywords as keys and the argument values as
+corresponding values), or a (new) empty dictionary if there were no
+excess keyword arguments.
+
+If the syntax "*expression" appears in the function call, "expression"
+must evaluate to an *iterable*.  Elements from these iterables are
+treated as if they were additional positional arguments.  For the call
+"f(x1, x2, *y, x3, x4)", if *y* evaluates to a sequence *y1*, …, *yM*,
+this is equivalent to a call with M+4 positional arguments *x1*, *x2*,
+*y1*, …, *yM*, *x3*, *x4*.
+
+A consequence of this is that although the "*expression" syntax may
+appear *after* explicit keyword arguments, it is processed *before*
+the keyword arguments (and any "**expression" arguments – see below).
+So:
+
+   >>> def f(a, b):
+   ...     print(a, b)
+   ...
+   >>> f(b=1, *(2,))
+   2 1
+   >>> f(a=1, *(2,))
+   Traceback (most recent call last):
+     File "<stdin>", line 1, in <module>
+   TypeError: f() got multiple values for keyword argument 'a'
+   >>> f(1, *(2,))
+   1 2
+
+It is unusual for both keyword arguments and the "*expression" syntax
+to be used in the same call, so in practice this confusion does not
+often arise.
+
+If the syntax "**expression" appears in the function call,
+"expression" must evaluate to a *mapping*, the contents of which are
+treated as additional keyword arguments. If a parameter matching a key
+has already been given a value (by an explicit keyword argument, or
+from another unpacking), a "TypeError" exception is raised.
+
+When "**expression" is used, each key in this mapping must be a
+string. Each value from the mapping is assigned to the first formal
+parameter eligible for keyword assignment whose name is equal to the
+key. A key need not be a Python identifier (e.g. ""max-temp °F"" is
+acceptable, although it will not match any formal parameter that could
+be declared). If there is no match to a formal parameter the key-value
+pair is collected by the "**" parameter, if there is one, or if there
+is not, a "TypeError" exception is raised.
+
+Formal parameters using the syntax "*identifier" or "**identifier"
+cannot be used as positional argument slots or as keyword argument
+names.
+
+Changed in version 3.5: Function calls accept any number of "*" and
+"**" unpackings, positional arguments may follow iterable unpackings
+("*"), and keyword arguments may follow dictionary unpackings ("**").
+Originally proposed by **PEP 448**.
+
+A call always returns some value, possibly "None", unless it raises an
+exception.  How this value is computed depends on the type of the
+callable object.
+
+If it is—
+
+a user-defined function:
+   The code block for the function is executed, passing it the
+   argument list.  The first thing the code block will do is bind the
+   formal parameters to the arguments; this is described in section
+   Function definitions.  When the code block executes a "return"
+   statement, this specifies the return value of the function call.
+   If execution reaches the end of the code block without executing a
+   "return" statement, the return value is "None".
+
+a built-in function or method:
+   The result is up to the interpreter; see Built-in Functions for the
+   descriptions of built-in functions and methods.
+
+a class object:
+   A new instance of that class is returned.
+
+a class instance method:
+   The corresponding user-defined function is called, with an argument
+   list that is one longer than the argument list of the call: the
+   instance becomes the first argument.
+
+a class instance:
+   The class must define a "__call__()" method; the effect is then the
+   same as if that method was called.
+''',
+    'class': r'''Class definitions
+*****************
+
+A class definition defines a class object (see section The standard
+type hierarchy):
+
+   classdef:    [decorators] "class" classname [type_params] [inheritance] ":" suite
+   inheritance: "(" [argument_list] ")"
+   classname:   identifier
+
+A class definition is an executable statement.  The inheritance list
+usually gives a list of base classes (see Metaclasses for more
+advanced uses), so each item in the list should evaluate to a class
+object which allows subclassing.  Classes without an inheritance list
+inherit, by default, from the base class "object"; hence,
+
+   class Foo:
+       pass
+
+is equivalent to
+
+   class Foo(object):
+       pass
+
+The class’s suite is then executed in a new execution frame (see
+Naming and binding), using a newly created local namespace and the
+original global namespace. (Usually, the suite contains mostly
+function definitions.)  When the class’s suite finishes execution, its
+execution frame is discarded but its local namespace is saved. [5] A
+class object is then created using the inheritance list for the base
+classes and the saved local namespace for the attribute dictionary.
+The class name is bound to this class object in the original local
+namespace.
+
+The order in which attributes are defined in the class body is
+preserved in the new class’s "__dict__".  Note that this is reliable
+only right after the class is created and only for classes that were
+defined using the definition syntax.
+
+Class creation can be customized heavily using metaclasses.
+
+Classes can also be decorated: just like when decorating functions,
+
+   @f1(arg)
+   @f2
+   class Foo: pass
+
+is roughly equivalent to
+
+   class Foo: pass
+   Foo = f1(arg)(f2(Foo))
+
+The evaluation rules for the decorator expressions are the same as for
+function decorators.  The result is then bound to the class name.
+
+Changed in version 3.9: Classes may be decorated with any valid
+"assignment_expression". Previously, the grammar was much more
+restrictive; see **PEP 614** for details.
+
+A list of type parameters may be given in square brackets immediately
+after the class’s name. This indicates to static type checkers that
+the class is generic. At runtime, the type parameters can be retrieved
+from the class’s "__type_params__" attribute. See Generic classes for
+more.
+
+Changed in version 3.12: Type parameter lists are new in Python 3.12.
+
+**Programmer’s note:** Variables defined in the class definition are
+class attributes; they are shared by instances.  Instance attributes
+can be set in a method with "self.name = value".  Both class and
+instance attributes are accessible through the notation “"self.name"”,
+and an instance attribute hides a class attribute with the same name
+when accessed in this way.  Class attributes can be used as defaults
+for instance attributes, but using mutable values there can lead to
+unexpected results.  Descriptors can be used to create instance
+variables with different implementation details.
+
+See also:
+
+  **PEP 3115** - Metaclasses in Python 3000
+     The proposal that changed the declaration of metaclasses to the
+     current syntax, and the semantics for how classes with
+     metaclasses are constructed.
+
+  **PEP 3129** - Class Decorators
+     The proposal that added class decorators.  Function and method
+     decorators were introduced in **PEP 318**.
+''',
+    'comparisons': r'''Comparisons
+***********
+
+Unlike C, all comparison operations in Python have the same priority,
+which is lower than that of any arithmetic, shifting or bitwise
+operation.  Also unlike C, expressions like "a < b < c" have the
+interpretation that is conventional in mathematics:
+
+   comparison:    or_expr (comp_operator or_expr)*
+   comp_operator: "<" | ">" | "==" | ">=" | "<=" | "!="
+                  | "is" ["not"] | ["not"] "in"
+
+Comparisons yield boolean values: "True" or "False". Custom *rich
+comparison methods* may return non-boolean values. In this case Python
+will call "bool()" on such value in boolean contexts.
+
+Comparisons can be chained arbitrarily, e.g., "x < y <= z" is
+equivalent to "x < y and y <= z", except that "y" is evaluated only
+once (but in both cases "z" is not evaluated at all when "x < y" is
+found to be false).
+
+Formally, if *a*, *b*, *c*, …, *y*, *z* are expressions and *op1*,
+*op2*, …, *opN* are comparison operators, then "a op1 b op2 c ... y
+opN z" is equivalent to "a op1 b and b op2 c and ... y opN z", except
+that each expression is evaluated at most once.
+
+Note that "a op1 b op2 c" doesn’t imply any kind of comparison between
+*a* and *c*, so that, e.g., "x < y > z" is perfectly legal (though
+perhaps not pretty).
+
+
+Value comparisons
+=================
+
+The operators "<", ">", "==", ">=", "<=", and "!=" compare the values
+of two objects.  The objects do not need to have the same type.
+
+Chapter Objects, values and types states that objects have a value (in
+addition to type and identity).  The value of an object is a rather
+abstract notion in Python: For example, there is no canonical access
+method for an object’s value.  Also, there is no requirement that the
+value of an object should be constructed in a particular way, e.g.
+comprised of all its data attributes. Comparison operators implement a
+particular notion of what the value of an object is.  One can think of
+them as defining the value of an object indirectly, by means of their
+comparison implementation.
+
+Because all types are (direct or indirect) subtypes of "object", they
+inherit the default comparison behavior from "object".  Types can
+customize their comparison behavior by implementing *rich comparison
+methods* like "__lt__()", described in Basic customization.
+
+The default behavior for equality comparison ("==" and "!=") is based
+on the identity of the objects.  Hence, equality comparison of
+instances with the same identity results in equality, and equality
+comparison of instances with different identities results in
+inequality.  A motivation for this default behavior is the desire that
+all objects should be reflexive (i.e. "x is y" implies "x == y").
+
+A default order comparison ("<", ">", "<=", and ">=") is not provided;
+an attempt raises "TypeError".  A motivation for this default behavior
+is the lack of a similar invariant as for equality.
+
+The behavior of the default equality comparison, that instances with
+different identities are always unequal, may be in contrast to what
+types will need that have a sensible definition of object value and
+value-based equality.  Such types will need to customize their
+comparison behavior, and in fact, a number of built-in types have done
+that.
+
+The following list describes the comparison behavior of the most
+important built-in types.
+
+* Numbers of built-in numeric types (Numeric Types — int, float,
+  complex) and of the standard library types "fractions.Fraction" and
+  "decimal.Decimal" can be compared within and across their types,
+  with the restriction that complex numbers do not support order
+  comparison.  Within the limits of the types involved, they compare
+  mathematically (algorithmically) correct without loss of precision.
+
+  The not-a-number values "float('NaN')" and "decimal.Decimal('NaN')"
+  are special.  Any ordered comparison of a number to a not-a-number
+  value is false. A counter-intuitive implication is that not-a-number
+  values are not equal to themselves.  For example, if "x =
+  float('NaN')", "3 < x", "x < 3" and "x == x" are all false, while "x
+  != x" is true.  This behavior is compliant with IEEE 754.
+
+* "None" and "NotImplemented" are singletons.  **PEP 8** advises that
+  comparisons for singletons should always be done with "is" or "is
+  not", never the equality operators.
+
+* Binary sequences (instances of "bytes" or "bytearray") can be
+  compared within and across their types.  They compare
+  lexicographically using the numeric values of their elements.
+
+* Strings (instances of "str") compare lexicographically using the
+  numerical Unicode code points (the result of the built-in function
+  "ord()") of their characters. [3]
+
+  Strings and binary sequences cannot be directly compared.
+
+* Sequences (instances of "tuple", "list", or "range") can be compared
+  only within each of their types, with the restriction that ranges do
+  not support order comparison.  Equality comparison across these
+  types results in inequality, and ordering comparison across these
+  types raises "TypeError".
+
+  Sequences compare lexicographically using comparison of
+  corresponding elements.  The built-in containers typically assume
+  identical objects are equal to themselves.  That lets them bypass
+  equality tests for identical objects to improve performance and to
+  maintain their internal invariants.
+
+  Lexicographical comparison between built-in collections works as
+  follows:
+
+  * For two collections to compare equal, they must be of the same
+    type, have the same length, and each pair of corresponding
+    elements must compare equal (for example, "[1,2] == (1,2)" is
+    false because the type is not the same).
+
+  * Collections that support order comparison are ordered the same as
+    their first unequal elements (for example, "[1,2,x] <= [1,2,y]"
+    has the same value as "x <= y").  If a corresponding element does
+    not exist, the shorter collection is ordered first (for example,
+    "[1,2] < [1,2,3]" is true).
+
+* Mappings (instances of "dict") compare equal if and only if they
+  have equal "(key, value)" pairs. Equality comparison of the keys and
+  values enforces reflexivity.
+
+  Order comparisons ("<", ">", "<=", and ">=") raise "TypeError".
+
+* Sets (instances of "set" or "frozenset") can be compared within and
+  across their types.
+
+  They define order comparison operators to mean subset and superset
+  tests.  Those relations do not define total orderings (for example,
+  the two sets "{1,2}" and "{2,3}" are not equal, nor subsets of one
+  another, nor supersets of one another).  Accordingly, sets are not
+  appropriate arguments for functions which depend on total ordering
+  (for example, "min()", "max()", and "sorted()" produce undefined
+  results given a list of sets as inputs).
+
+  Comparison of sets enforces reflexivity of its elements.
+
+* Most other built-in types have no comparison methods implemented, so
+  they inherit the default comparison behavior.
+
+User-defined classes that customize their comparison behavior should
+follow some consistency rules, if possible:
+
+* Equality comparison should be reflexive. In other words, identical
+  objects should compare equal:
+
+     "x is y" implies "x == y"
+
+* Comparison should be symmetric. In other words, the following
+  expressions should have the same result:
+
+     "x == y" and "y == x"
+
+     "x != y" and "y != x"
+
+     "x < y" and "y > x"
+
+     "x <= y" and "y >= x"
+
+* Comparison should be transitive. The following (non-exhaustive)
+  examples illustrate that:
+
+     "x > y and y > z" implies "x > z"
+
+     "x < y and y <= z" implies "x < z"
+
+* Inverse comparison should result in the boolean negation. In other
+  words, the following expressions should have the same result:
+
+     "x == y" and "not x != y"
+
+     "x < y" and "not x >= y" (for total ordering)
+
+     "x > y" and "not x <= y" (for total ordering)
+
+  The last two expressions apply to totally ordered collections (e.g.
+  to sequences, but not to sets or mappings). See also the
+  "total_ordering()" decorator.
+
+* The "hash()" result should be consistent with equality. Objects that
+  are equal should either have the same hash value, or be marked as
+  unhashable.
+
+Python does not enforce these consistency rules. In fact, the
+not-a-number values are an example for not following these rules.
+
+
+Membership test operations
+==========================
+
+The operators "in" and "not in" test for membership.  "x in s"
+evaluates to "True" if *x* is a member of *s*, and "False" otherwise.
+"x not in s" returns the negation of "x in s".  All built-in sequences
+and set types support this as well as dictionary, for which "in" tests
+whether the dictionary has a given key. For container types such as
+list, tuple, set, frozenset, dict, or collections.deque, the
+expression "x in y" is equivalent to "any(x is e or x == e for e in
+y)".
+
+For the string and bytes types, "x in y" is "True" if and only if *x*
+is a substring of *y*.  An equivalent test is "y.find(x) != -1".
+Empty strings are always considered to be a substring of any other
+string, so """ in "abc"" will return "True".
+
+For user-defined classes which define the "__contains__()" method, "x
+in y" returns "True" if "y.__contains__(x)" returns a true value, and
+"False" otherwise.
+
+For user-defined classes which do not define "__contains__()" but do
+define "__iter__()", "x in y" is "True" if some value "z", for which
+the expression "x is z or x == z" is true, is produced while iterating
+over "y". If an exception is raised during the iteration, it is as if
+"in" raised that exception.
+
+Lastly, the old-style iteration protocol is tried: if a class defines
+"__getitem__()", "x in y" is "True" if and only if there is a non-
+negative integer index *i* such that "x is y[i] or x == y[i]", and no
+lower integer index raises the "IndexError" exception.  (If any other
+exception is raised, it is as if "in" raised that exception).
+
+The operator "not in" is defined to have the inverse truth value of
+"in".
+
+
+Identity comparisons
+====================
+
+The operators "is" and "is not" test for an object’s identity: "x is
+y" is true if and only if *x* and *y* are the same object.  An
+Object’s identity is determined using the "id()" function.  "x is not
+y" yields the inverse truth value. [4]
+''',
+    'compound': r'''Compound statements
+*******************
+
+Compound statements contain (groups of) other statements; they affect
+or control the execution of those other statements in some way.  In
+general, compound statements span multiple lines, although in simple
+incarnations a whole compound statement may be contained in one line.
+
+The "if", "while" and "for" statements implement traditional control
+flow constructs.  "try" specifies exception handlers and/or cleanup
+code for a group of statements, while the "with" statement allows the
+execution of initialization and finalization code around a block of
+code.  Function and class definitions are also syntactically compound
+statements.
+
+A compound statement consists of one or more ‘clauses.’  A clause
+consists of a header and a ‘suite.’  The clause headers of a
+particular compound statement are all at the same indentation level.
+Each clause header begins with a uniquely identifying keyword and ends
+with a colon.  A suite is a group of statements controlled by a
+clause.  A suite can be one or more semicolon-separated simple
+statements on the same line as the header, following the header’s
+colon, or it can be one or more indented statements on subsequent
+lines.  Only the latter form of a suite can contain nested compound
+statements; the following is illegal, mostly because it wouldn’t be
+clear to which "if" clause a following "else" clause would belong:
+
+   if test1: if test2: print(x)
+
+Also note that the semicolon binds tighter than the colon in this
+context, so that in the following example, either all or none of the
+"print()" calls are executed:
+
+   if x < y < z: print(x); print(y); print(z)
+
+Summarizing:
+
+   compound_stmt: if_stmt
+                  | while_stmt
+                  | for_stmt
+                  | try_stmt
+                  | with_stmt
+                  | match_stmt
+                  | funcdef
+                  | classdef
+                  | async_with_stmt
+                  | async_for_stmt
+                  | async_funcdef
+   suite:         stmt_list NEWLINE | NEWLINE INDENT statement+ DEDENT
+   statement:     stmt_list NEWLINE | compound_stmt
+   stmt_list:     simple_stmt (";" simple_stmt)* [";"]
+
+Note that statements always end in a "NEWLINE" possibly followed by a
+"DEDENT".  Also note that optional continuation clauses always begin
+with a keyword that cannot start a statement, thus there are no
+ambiguities (the ‘dangling "else"’ problem is solved in Python by
+requiring nested "if" statements to be indented).
+
+The formatting of the grammar rules in the following sections places
+each clause on a separate line for clarity.
+
+
+The "if" statement
+==================
+
+The "if" statement is used for conditional execution:
+
+   if_stmt: "if" assignment_expression ":" suite
+            ("elif" assignment_expression ":" suite)*
+            ["else" ":" suite]
+
+It selects exactly one of the suites by evaluating the expressions one
+by one until one is found to be true (see section Boolean operations
+for the definition of true and false); then that suite is executed
+(and no other part of the "if" statement is executed or evaluated).
+If all expressions are false, the suite of the "else" clause, if
+present, is executed.
+
+
+The "while" statement
+=====================
+
+The "while" statement is used for repeated execution as long as an
+expression is true:
+
+   while_stmt: "while" assignment_expression ":" suite
+               ["else" ":" suite]
+
+This repeatedly tests the expression and, if it is true, executes the
+first suite; if the expression is false (which may be the first time
+it is tested) the suite of the "else" clause, if present, is executed
+and the loop terminates.
+
+A "break" statement executed in the first suite terminates the loop
+without executing the "else" clause’s suite.  A "continue" statement
+executed in the first suite skips the rest of the suite and goes back
+to testing the expression.
+
+
+The "for" statement
+===================
+
+The "for" statement is used to iterate over the elements of a sequence
+(such as a string, tuple or list) or other iterable object:
+
+   for_stmt: "for" target_list "in" starred_expression_list ":" suite
+             ["else" ":" suite]
+
+The "starred_expression_list" expression is evaluated once; it should
+yield an *iterable* object. An *iterator* is created for that
+iterable. The first item provided by the iterator is then assigned to
+the target list using the standard rules for assignments (see
+Assignment statements), and the suite is executed. This repeats for
+each item provided by the iterator. When the iterator is exhausted,
+the suite in the "else" clause, if present, is executed, and the loop
+terminates.
+
+A "break" statement executed in the first suite terminates the loop
+without executing the "else" clause’s suite.  A "continue" statement
+executed in the first suite skips the rest of the suite and continues
+with the next item, or with the "else" clause if there is no next
+item.
+
+The for-loop makes assignments to the variables in the target list.
+This overwrites all previous assignments to those variables including
+those made in the suite of the for-loop:
+
+   for i in range(10):
+       print(i)
+       i = 5             # this will not affect the for-loop
+                         # because i will be overwritten with the next
+                         # index in the range
+
+Names in the target list are not deleted when the loop is finished,
+but if the sequence is empty, they will not have been assigned to at
+all by the loop.  Hint: the built-in type "range()" represents
+immutable arithmetic sequences of integers. For instance, iterating
+"range(3)" successively yields 0, 1, and then 2.
+
+Changed in version 3.11: Starred elements are now allowed in the
+expression list.
+
+
+The "try" statement
+===================
+
+The "try" statement specifies exception handlers and/or cleanup code
+for a group of statements:
+
+   try_stmt:  try1_stmt | try2_stmt | try3_stmt
+   try1_stmt: "try" ":" suite
+              ("except" [expression ["as" identifier]] ":" suite)+
+              ["else" ":" suite]
+              ["finally" ":" suite]
+   try2_stmt: "try" ":" suite
+              ("except" "*" expression ["as" identifier] ":" suite)+
+              ["else" ":" suite]
+              ["finally" ":" suite]
+   try3_stmt: "try" ":" suite
+              "finally" ":" suite
+
+Additional information on exceptions can be found in section
+Exceptions, and information on using the "raise" statement to generate
+exceptions may be found in section The raise statement.
+
+Changed in version 3.14: Support for optionally dropping grouping
+parentheses when using multiple exception types. See **PEP 758**.
+
+
+"except" clause
+---------------
+
+The "except" clause(s) specify one or more exception handlers. When no
+exception occurs in the "try" clause, no exception handler is
+executed. When an exception occurs in the "try" suite, a search for an
+exception handler is started. This search inspects the "except"
+clauses in turn until one is found that matches the exception. An
+expression-less "except" clause, if present, must be last; it matches
+any exception.
+
+For an "except" clause with an expression, the expression must
+evaluate to an exception type or a tuple of exception types.
+Parentheses can be dropped if multiple exception types are provided
+and the "as" clause is not used. The raised exception matches an
+"except" clause whose expression evaluates to the class or a *non-
+virtual base class* of the exception object, or to a tuple that
+contains such a class.
+
+If no "except" clause matches the exception, the search for an
+exception handler continues in the surrounding code and on the
+invocation stack.  [1]
+
+If the evaluation of an expression in the header of an "except" clause
+raises an exception, the original search for a handler is canceled and
+a search starts for the new exception in the surrounding code and on
+the call stack (it is treated as if the entire "try" statement raised
+the exception).
+
+When a matching "except" clause is found, the exception is assigned to
+the target specified after the "as" keyword in that "except" clause,
+if present, and the "except" clause’s suite is executed. All "except"
+clauses must have an executable block. When the end of this block is
+reached, execution continues normally after the entire "try"
+statement. (This means that if two nested handlers exist for the same
+exception, and the exception occurs in the "try" clause of the inner
+handler, the outer handler will not handle the exception.)
+
+When an exception has been assigned using "as target", it is cleared
+at the end of the "except" clause.  This is as if
+
+   except E as N:
+       foo
+
+was translated to
+
+   except E as N:
+       try:
+           foo
+       finally:
+           del N
+
+This means the exception must be assigned to a different name to be
+able to refer to it after the "except" clause. Exceptions are cleared
+because with the traceback attached to them, they form a reference
+cycle with the stack frame, keeping all locals in that frame alive
+until the next garbage collection occurs.
+
+Before an "except" clause’s suite is executed, the exception is stored
+in the "sys" module, where it can be accessed from within the body of
+the "except" clause by calling "sys.exception()". When leaving an
+exception handler, the exception stored in the "sys" module is reset
+to its previous value:
+
+   >>> print(sys.exception())
+   None
+   >>> try:
+   ...     raise TypeError
+   ... except:
+   ...     print(repr(sys.exception()))
+   ...     try:
+   ...          raise ValueError
+   ...     except:
+   ...         print(repr(sys.exception()))
+   ...     print(repr(sys.exception()))
+   ...
+   TypeError()
+   ValueError()
+   TypeError()
+   >>> print(sys.exception())
+   None
+
+
+"except*" clause
+----------------
+
+The "except*" clause(s) specify one or more handlers for groups of
+exceptions ("BaseExceptionGroup" instances). A "try" statement can
+have either "except" or "except*" clauses, but not both. The exception
+type for matching is mandatory in the case of "except*", so "except*:"
+is a syntax error. The type is interpreted as in the case of "except",
+but matching is performed on the exceptions contained in the group
+that is being handled. An "TypeError" is raised if a matching type is
+a subclass of "BaseExceptionGroup", because that would have ambiguous
+semantics.
+
+When an exception group is raised in the try block, each "except*"
+clause splits (see "split()") it into the subgroups of matching and
+non-matching exceptions. If the matching subgroup is not empty, it
+becomes the handled exception (the value returned from
+"sys.exception()") and assigned to the target of the "except*" clause
+(if there is one). Then, the body of the "except*" clause executes. If
+the non-matching subgroup is not empty, it is processed by the next
+"except*" in the same manner. This continues until all exceptions in
+the group have been matched, or the last "except*" clause has run.
+
+After all "except*" clauses execute, the group of unhandled exceptions
+is merged with any exceptions that were raised or re-raised from
+within "except*" clauses. This merged exception group propagates on.:
+
+   >>> try:
+   ...     raise ExceptionGroup("eg",
+   ...         [ValueError(1), TypeError(2), OSError(3), OSError(4)])
+   ... except* TypeError as e:
+   ...     print(f'caught {type(e)} with nested {e.exceptions}')
+   ... except* OSError as e:
+   ...     print(f'caught {type(e)} with nested {e.exceptions}')
+   ...
+   caught <class 'ExceptionGroup'> with nested (TypeError(2),)
+   caught <class 'ExceptionGroup'> with nested (OSError(3), OSError(4))
+     + Exception Group Traceback (most recent call last):
+     |   File "<doctest default[0]>", line 2, in <module>
+     |     raise ExceptionGroup("eg",
+     |         [ValueError(1), TypeError(2), OSError(3), OSError(4)])
+     | ExceptionGroup: eg (1 sub-exception)
+     +-+---------------- 1 ----------------
+       | ValueError: 1
+       +------------------------------------
+
+If the exception raised from the "try" block is not an exception group
+and its type matches one of the "except*" clauses, it is caught and
+wrapped by an exception group with an empty message string. This
+ensures that the type of the target "e" is consistently
+"BaseExceptionGroup":
+
+   >>> try:
+   ...     raise BlockingIOError
+   ... except* BlockingIOError as e:
+   ...     print(repr(e))
+   ...
+   ExceptionGroup('', (BlockingIOError(),))
+
+"break", "continue" and "return" cannot appear in an "except*" clause.
+
+
+"else" clause
+-------------
+
+The optional "else" clause is executed if the control flow leaves the
+"try" suite, no exception was raised, and no "return", "continue", or
+"break" statement was executed.  Exceptions in the "else" clause are
+not handled by the preceding "except" clauses.
+
+
+"finally" clause
+----------------
+
+If "finally" is present, it specifies a ‘cleanup’ handler.  The "try"
+clause is executed, including any "except" and "else" clauses. If an
+exception occurs in any of the clauses and is not handled, the
+exception is temporarily saved. The "finally" clause is executed.  If
+there is a saved exception it is re-raised at the end of the "finally"
+clause. If the "finally" clause raises another exception, the saved
+exception is set as the context of the new exception. If the "finally"
+clause executes a "return", "break" or "continue" statement, the saved
+exception is discarded. For example, this function returns 42.
+
+   def f():
+       try:
+           1/0
+       finally:
+           return 42
+
+The exception information is not available to the program during
+execution of the "finally" clause.
+
+When a "return", "break" or "continue" statement is executed in the
+"try" suite of a "try"…"finally" statement, the "finally" clause is
+also executed ‘on the way out.’
+
+The return value of a function is determined by the last "return"
+statement executed.  Since the "finally" clause always executes, a
+"return" statement executed in the "finally" clause will always be the
+last one executed. The following function returns ‘finally’.
+
+   def foo():
+       try:
+           return 'try'
+       finally:
+           return 'finally'
+
+Changed in version 3.8: Prior to Python 3.8, a "continue" statement
+was illegal in the "finally" clause due to a problem with the
+implementation.
+
+Changed in version 3.14: The compiler emits a "SyntaxWarning" when a
+"return", "break" or "continue" appears in a "finally" block (see
+**PEP 765**).
+
+
+The "with" statement
+====================
+
+The "with" statement is used to wrap the execution of a block with
+methods defined by a context manager (see section With Statement
+Context Managers). This allows common "try"…"except"…"finally" usage
+patterns to be encapsulated for convenient reuse.
+
+   with_stmt:          "with" ( "(" with_stmt_contents ","? ")" | with_stmt_contents ) ":" suite
+   with_stmt_contents: with_item ("," with_item)*
+   with_item:          expression ["as" target]
+
+The execution of the "with" statement with one “item” proceeds as
+follows:
+
+1. The context expression (the expression given in the "with_item") is
+   evaluated to obtain a context manager.
+
+2. The context manager’s "__enter__()" is loaded for later use.
+
+3. The context manager’s "__exit__()" is loaded for later use.
+
+4. The context manager’s "__enter__()" method is invoked.
+
+5. If a target was included in the "with" statement, the return value
+   from "__enter__()" is assigned to it.
+
+   Note:
+
+     The "with" statement guarantees that if the "__enter__()" method
+     returns without an error, then "__exit__()" will always be
+     called. Thus, if an error occurs during the assignment to the
+     target list, it will be treated the same as an error occurring
+     within the suite would be. See step 7 below.
+
+6. The suite is executed.
+
+7. The context manager’s "__exit__()" method is invoked.  If an
+   exception caused the suite to be exited, its type, value, and
+   traceback are passed as arguments to "__exit__()". Otherwise, three
+   "None" arguments are supplied.
+
+   If the suite was exited due to an exception, and the return value
+   from the "__exit__()" method was false, the exception is reraised.
+   If the return value was true, the exception is suppressed, and
+   execution continues with the statement following the "with"
+   statement.
+
+   If the suite was exited for any reason other than an exception, the
+   return value from "__exit__()" is ignored, and execution proceeds
+   at the normal location for the kind of exit that was taken.
+
+The following code:
+
+   with EXPRESSION as TARGET:
+       SUITE
+
+is semantically equivalent to:
+
+   manager = (EXPRESSION)
+   enter = manager.__enter__
+   exit = manager.__exit__
+   value = enter()
+   hit_except = False
+
+   try:
+       TARGET = value
+       SUITE
+   except:
+       hit_except = True
+       if not exit(*sys.exc_info()):
+           raise
+   finally:
+       if not hit_except:
+           exit(None, None, None)
+
+except that implicit special method lookup is used for "__enter__()"
+and "__exit__()".
+
+With more than one item, the context managers are processed as if
+multiple "with" statements were nested:
+
+   with A() as a, B() as b:
+       SUITE
+
+is semantically equivalent to:
+
+   with A() as a:
+       with B() as b:
+           SUITE
+
+You can also write multi-item context managers in multiple lines if
+the items are surrounded by parentheses. For example:
+
+   with (
+       A() as a,
+       B() as b,
+   ):
+       SUITE
+
+Changed in version 3.1: Support for multiple context expressions.
+
+Changed in version 3.10: Support for using grouping parentheses to
+break the statement in multiple lines.
+
+See also:
+
+  **PEP 343** - The “with” statement
+     The specification, background, and examples for the Python "with"
+     statement.
+
+
+The "match" statement
+=====================
+
+Added in version 3.10.
+
+The match statement is used for pattern matching.  Syntax:
+
+   match_stmt:   'match' subject_expr ":" NEWLINE INDENT case_block+ DEDENT
+   subject_expr: `!star_named_expression` "," `!star_named_expressions`?
+                 | `!named_expression`
+   case_block:   'case' patterns [guard] ":" `!block`
+
+Note:
+
+  This section uses single quotes to denote soft keywords.
+
+Pattern matching takes a pattern as input (following "case") and a
+subject value (following "match").  The pattern (which may contain
+subpatterns) is matched against the subject value.  The outcomes are:
+
+* A match success or failure (also termed a pattern success or
+  failure).
+
+* Possible binding of matched values to a name.  The prerequisites for
+  this are further discussed below.
+
+The "match" and "case" keywords are soft keywords.
+
+See also:
+
+  * **PEP 634** – Structural Pattern Matching: Specification
+
+  * **PEP 636** – Structural Pattern Matching: Tutorial
+
+
+Overview
+--------
+
+Here’s an overview of the logical flow of a match statement:
+
+1. The subject expression "subject_expr" is evaluated and a resulting
+   subject value obtained. If the subject expression contains a comma,
+   a tuple is constructed using the standard rules.
+
+2. Each pattern in a "case_block" is attempted to match with the
+   subject value. The specific rules for success or failure are
+   described below. The match attempt can also bind some or all of the
+   standalone names within the pattern. The precise pattern binding
+   rules vary per pattern type and are specified below.  **Name
+   bindings made during a successful pattern match outlive the
+   executed block and can be used after the match statement**.
+
+   Note:
+
+     During failed pattern matches, some subpatterns may succeed.  Do
+     not rely on bindings being made for a failed match.  Conversely,
+     do not rely on variables remaining unchanged after a failed
+     match.  The exact behavior is dependent on implementation and may
+     vary.  This is an intentional decision made to allow different
+     implementations to add optimizations.
+
+3. If the pattern succeeds, the corresponding guard (if present) is
+   evaluated. In this case all name bindings are guaranteed to have
+   happened.
+
+   * If the guard evaluates as true or is missing, the "block" inside
+     "case_block" is executed.
+
+   * Otherwise, the next "case_block" is attempted as described above.
+
+   * If there are no further case blocks, the match statement is
+     completed.
+
+Note:
+
+  Users should generally never rely on a pattern being evaluated.
+  Depending on implementation, the interpreter may cache values or use
+  other optimizations which skip repeated evaluations.
+
+A sample match statement:
+
+   >>> flag = False
+   >>> match (100, 200):
+   ...    case (100, 300):  # Mismatch: 200 != 300
+   ...        print('Case 1')
+   ...    case (100, 200) if flag:  # Successful match, but guard fails
+   ...        print('Case 2')
+   ...    case (100, y):  # Matches and binds y to 200
+   ...        print(f'Case 3, y: {y}')
+   ...    case _:  # Pattern not attempted
+   ...        print('Case 4, I match anything!')
+   ...
+   Case 3, y: 200
+
+In this case, "if flag" is a guard.  Read more about that in the next
+section.
+
+
+Guards
+------
+
+   guard: "if" `!named_expression`
+
+A "guard" (which is part of the "case") must succeed for code inside
+the "case" block to execute.  It takes the form: "if" followed by an
+expression.
+
+The logical flow of a "case" block with a "guard" follows:
+
+1. Check that the pattern in the "case" block succeeded.  If the
+   pattern failed, the "guard" is not evaluated and the next "case"
+   block is checked.
+
+2. If the pattern succeeded, evaluate the "guard".
+
+   * If the "guard" condition evaluates as true, the case block is
+     selected.
+
+   * If the "guard" condition evaluates as false, the case block is
+     not selected.
+
+   * If the "guard" raises an exception during evaluation, the
+     exception bubbles up.
+
+Guards are allowed to have side effects as they are expressions.
+Guard evaluation must proceed from the first to the last case block,
+one at a time, skipping case blocks whose pattern(s) don’t all
+succeed. (I.e., guard evaluation must happen in order.) Guard
+evaluation must stop once a case block is selected.
+
+
+Irrefutable Case Blocks
+-----------------------
+
+An irrefutable case block is a match-all case block.  A match
+statement may have at most one irrefutable case block, and it must be
+last.
+
+A case block is considered irrefutable if it has no guard and its
+pattern is irrefutable.  A pattern is considered irrefutable if we can
+prove from its syntax alone that it will always succeed.  Only the
+following patterns are irrefutable:
+
+* AS Patterns whose left-hand side is irrefutable
+
+* OR Patterns containing at least one irrefutable pattern
+
+* Capture Patterns
+
+* Wildcard Patterns
+
+* parenthesized irrefutable patterns
+
+
+Patterns
+--------
+
+Note:
+
+  This section uses grammar notations beyond standard EBNF:
+
+  * the notation "SEP.RULE+" is shorthand for "RULE (SEP RULE)*"
+
+  * the notation "!RULE" is shorthand for a negative lookahead
+    assertion
+
+The top-level syntax for "patterns" is:
+
+   patterns:       open_sequence_pattern | pattern
+   pattern:        as_pattern | or_pattern
+   closed_pattern: | literal_pattern
+                   | capture_pattern
+                   | wildcard_pattern
+                   | value_pattern
+                   | group_pattern
+                   | sequence_pattern
+                   | mapping_pattern
+                   | class_pattern
+
+The descriptions below will include a description “in simple terms” of
+what a pattern does for illustration purposes (credits to Raymond
+Hettinger for a document that inspired most of the descriptions). Note
+that these descriptions are purely for illustration purposes and **may
+not** reflect the underlying implementation.  Furthermore, they do not
+cover all valid forms.
+
+
+OR Patterns
+~~~~~~~~~~~
+
+An OR pattern is two or more patterns separated by vertical bars "|".
+Syntax:
+
+   or_pattern: "|".closed_pattern+
+
+Only the final subpattern may be irrefutable, and each subpattern must
+bind the same set of names to avoid ambiguity.
+
+An OR pattern matches each of its subpatterns in turn to the subject
+value, until one succeeds.  The OR pattern is then considered
+successful.  Otherwise, if none of the subpatterns succeed, the OR
+pattern fails.
+
+In simple terms, "P1 | P2 | ..." will try to match "P1", if it fails
+it will try to match "P2", succeeding immediately if any succeeds,
+failing otherwise.
+
+
+AS Patterns
+~~~~~~~~~~~
+
+An AS pattern matches an OR pattern on the left of the "as" keyword
+against a subject.  Syntax:
+
+   as_pattern: or_pattern "as" capture_pattern
+
+If the OR pattern fails, the AS pattern fails.  Otherwise, the AS
+pattern binds the subject to the name on the right of the as keyword
+and succeeds. "capture_pattern" cannot be a "_".
+
+In simple terms "P as NAME" will match with "P", and on success it
+will set "NAME = <subject>".
+
+
+Literal Patterns
+~~~~~~~~~~~~~~~~
+
+A literal pattern corresponds to most literals in Python.  Syntax:
+
+   literal_pattern: signed_number
+                    | signed_number "+" NUMBER
+                    | signed_number "-" NUMBER
+                    | strings
+                    | "None"
+                    | "True"
+                    | "False"
+   signed_number:   ["-"] NUMBER
+
+The rule "strings" and the token "NUMBER" are defined in the standard
+Python grammar.  Triple-quoted strings are supported.  Raw strings and
+byte strings are supported.  f-strings and t-strings are not
+supported.
+
+The forms "signed_number '+' NUMBER" and "signed_number '-' NUMBER"
+are for expressing complex numbers; they require a real number on the
+left and an imaginary number on the right. E.g. "3 + 4j".
+
+In simple terms, "LITERAL" will succeed only if "<subject> ==
+LITERAL". For the singletons "None", "True" and "False", the "is"
+operator is used.
+
+
+Capture Patterns
+~~~~~~~~~~~~~~~~
+
+A capture pattern binds the subject value to a name. Syntax:
+
+   capture_pattern: !'_' NAME
+
+A single underscore "_" is not a capture pattern (this is what "!'_'"
+expresses). It is instead treated as a "wildcard_pattern".
+
+In a given pattern, a given name can only be bound once.  E.g. "case
+x, x: ..." is invalid while "case [x] | x: ..." is allowed.
+
+Capture patterns always succeed.  The binding follows scoping rules
+established by the assignment expression operator in **PEP 572**; the
+name becomes a local variable in the closest containing function scope
+unless there’s an applicable "global" or "nonlocal" statement.
+
+In simple terms "NAME" will always succeed and it will set "NAME =
+<subject>".
+
+
+Wildcard Patterns
+~~~~~~~~~~~~~~~~~
+
+A wildcard pattern always succeeds (matches anything) and binds no
+name.  Syntax:
+
+   wildcard_pattern: '_'
+
+"_" is a soft keyword within any pattern, but only within patterns.
+It is an identifier, as usual, even within "match" subject
+expressions, "guard"s, and "case" blocks.
+
+In simple terms, "_" will always succeed.
+
+
+Value Patterns
+~~~~~~~~~~~~~~
+
+A value pattern represents a named value in Python. Syntax:
+
+   value_pattern: attr
+   attr:          name_or_attr "." NAME
+   name_or_attr:  attr | NAME
+
+The dotted name in the pattern is looked up using standard Python name
+resolution rules.  The pattern succeeds if the value found compares
+equal to the subject value (using the "==" equality operator).
+
+In simple terms "NAME1.NAME2" will succeed only if "<subject> ==
+NAME1.NAME2"
+
+Note:
+
+  If the same value occurs multiple times in the same match statement,
+  the interpreter may cache the first value found and reuse it rather
+  than repeat the same lookup.  This cache is strictly tied to a given
+  execution of a given match statement.
+
+
+Group Patterns
+~~~~~~~~~~~~~~
+
+A group pattern allows users to add parentheses around patterns to
+emphasize the intended grouping.  Otherwise, it has no additional
+syntax. Syntax:
+
+   group_pattern: "(" pattern ")"
+
+In simple terms "(P)" has the same effect as "P".
+
+
+Sequence Patterns
+~~~~~~~~~~~~~~~~~
+
+A sequence pattern contains several subpatterns to be matched against
+sequence elements. The syntax is similar to the unpacking of a list or
+tuple.
+
+   sequence_pattern:       "[" [maybe_sequence_pattern] "]"
+                           | "(" [open_sequence_pattern] ")"
+   open_sequence_pattern:  maybe_star_pattern "," [maybe_sequence_pattern]
+   maybe_sequence_pattern: ",".maybe_star_pattern+ ","?
+   maybe_star_pattern:     star_pattern | pattern
+   star_pattern:           "*" (capture_pattern | wildcard_pattern)
+
+There is no difference if parentheses  or square brackets are used for
+sequence patterns (i.e. "(...)" vs "[...]" ).
+
+Note:
+
+  A single pattern enclosed in parentheses without a trailing comma
+  (e.g. "(3 | 4)") is a group pattern. While a single pattern enclosed
+  in square brackets (e.g. "[3 | 4]") is still a sequence pattern.
+
+At most one star subpattern may be in a sequence pattern.  The star
+subpattern may occur in any position. If no star subpattern is
+present, the sequence pattern is a fixed-length sequence pattern;
+otherwise it is a variable-length sequence pattern.
+
+The following is the logical flow for matching a sequence pattern
+against a subject value:
+
+1. If the subject value is not a sequence [2], the sequence pattern
+   fails.
+
+2. If the subject value is an instance of "str", "bytes" or
+   "bytearray" the sequence pattern fails.
+
+3. The subsequent steps depend on whether the sequence pattern is
+   fixed or variable-length.
+
+   If the sequence pattern is fixed-length:
+
+   1. If the length of the subject sequence is not equal to the number
+      of subpatterns, the sequence pattern fails
+
+   2. Subpatterns in the sequence pattern are matched to their
+      corresponding items in the subject sequence from left to right.
+      Matching stops as soon as a subpattern fails.  If all
+      subpatterns succeed in matching their corresponding item, the
+      sequence pattern succeeds.
+
+   Otherwise, if the sequence pattern is variable-length:
+
+   1. If the length of the subject sequence is less than the number of
+      non-star subpatterns, the sequence pattern fails.
+
+   2. The leading non-star subpatterns are matched to their
+      corresponding items as for fixed-length sequences.
+
+   3. If the previous step succeeds, the star subpattern matches a
+      list formed of the remaining subject items, excluding the
+      remaining items corresponding to non-star subpatterns following
+      the star subpattern.
+
+   4. Remaining non-star subpatterns are matched to their
+      corresponding subject items, as for a fixed-length sequence.
+
+   Note:
+
+     The length of the subject sequence is obtained via "len()" (i.e.
+     via the "__len__()" protocol). This length may be cached by the
+     interpreter in a similar manner as value patterns.
+
+In simple terms "[P1, P2, P3," … ", P<N>]" matches only if all the
+following happens:
+
+* check "<subject>" is a sequence
+
+* "len(subject) == <N>"
+
+* "P1" matches "<subject>[0]" (note that this match can also bind
+  names)
+
+* "P2" matches "<subject>[1]" (note that this match can also bind
+  names)
+
+* … and so on for the corresponding pattern/element.
+
+
+Mapping Patterns
+~~~~~~~~~~~~~~~~
+
+A mapping pattern contains one or more key-value patterns.  The syntax
+is similar to the construction of a dictionary. Syntax:
+
+   mapping_pattern:     "{" [items_pattern] "}"
+   items_pattern:       ",".key_value_pattern+ ","?
+   key_value_pattern:   (literal_pattern | value_pattern) ":" pattern
+                        | double_star_pattern
+   double_star_pattern: "**" capture_pattern
+
+At most one double star pattern may be in a mapping pattern.  The
+double star pattern must be the last subpattern in the mapping
+pattern.
+
+Duplicate keys in mapping patterns are disallowed. Duplicate literal
+keys will raise a "SyntaxError". Two keys that otherwise have the same
+value will raise a "ValueError" at runtime.
+
+The following is the logical flow for matching a mapping pattern
+against a subject value:
+
+1. If the subject value is not a mapping [3],the mapping pattern
+   fails.
+
+2. If every key given in the mapping pattern is present in the subject
+   mapping, and the pattern for each key matches the corresponding
+   item of the subject mapping, the mapping pattern succeeds.
+
+3. If duplicate keys are detected in the mapping pattern, the pattern
+   is considered invalid. A "SyntaxError" is raised for duplicate
+   literal values; or a "ValueError" for named keys of the same value.
+
+Note:
+
+  Key-value pairs are matched using the two-argument form of the
+  mapping subject’s "get()" method.  Matched key-value pairs must
+  already be present in the mapping, and not created on-the-fly via
+  "__missing__()" or "__getitem__()".
+
+In simple terms "{KEY1: P1, KEY2: P2, ... }" matches only if all the
+following happens:
+
+* check "<subject>" is a mapping
+
+* "KEY1 in <subject>"
+
+* "P1" matches "<subject>[KEY1]"
+
+* … and so on for the corresponding KEY/pattern pair.
+
+
+Class Patterns
+~~~~~~~~~~~~~~
+
+A class pattern represents a class and its positional and keyword
+arguments (if any).  Syntax:
+
+   class_pattern:       name_or_attr "(" [pattern_arguments ","?] ")"
+   pattern_arguments:   positional_patterns ["," keyword_patterns]
+                        | keyword_patterns
+   positional_patterns: ",".pattern+
+   keyword_patterns:    ",".keyword_pattern+
+   keyword_pattern:     NAME "=" pattern
+
+The same keyword should not be repeated in class patterns.
+
+The following is the logical flow for matching a class pattern against
+a subject value:
+
+1. If "name_or_attr" is not an instance of the builtin "type" , raise
+   "TypeError".
+
+2. If the subject value is not an instance of "name_or_attr" (tested
+   via "isinstance()"), the class pattern fails.
+
+3. If no pattern arguments are present, the pattern succeeds.
+   Otherwise, the subsequent steps depend on whether keyword or
+   positional argument patterns are present.
+
+   For a number of built-in types (specified below), a single
+   positional subpattern is accepted which will match the entire
+   subject; for these types keyword patterns also work as for other
+   types.
+
+   If only keyword patterns are present, they are processed as
+   follows, one by one:
+
+   1. The keyword is looked up as an attribute on the subject.
+
+      * If this raises an exception other than "AttributeError", the
+        exception bubbles up.
+
+      * If this raises "AttributeError", the class pattern has failed.
+
+      * Else, the subpattern associated with the keyword pattern is
+        matched against the subject’s attribute value.  If this fails,
+        the class pattern fails; if this succeeds, the match proceeds
+        to the next keyword.
+
+   2. If all keyword patterns succeed, the class pattern succeeds.
+
+   If any positional patterns are present, they are converted to
+   keyword patterns using the "__match_args__" attribute on the class
+   "name_or_attr" before matching:
+
+   1. The equivalent of "getattr(cls, "__match_args__", ())" is
+      called.
+
+      * If this raises an exception, the exception bubbles up.
+
+      * If the returned value is not a tuple, the conversion fails and
+        "TypeError" is raised.
+
+      * If there are more positional patterns than
+        "len(cls.__match_args__)", "TypeError" is raised.
+
+      * Otherwise, positional pattern "i" is converted to a keyword
+        pattern using "__match_args__[i]" as the keyword.
+        "__match_args__[i]" must be a string; if not "TypeError" is
+        raised.
+
+      * If there are duplicate keywords, "TypeError" is raised.
+
+      See also:
+
+        Customizing positional arguments in class pattern matching
+
+   2. Once all positional patterns have been converted to keyword
+      patterns, the match proceeds as if there were only keyword
+      patterns.
+
+   For the following built-in types the handling of positional
+   subpatterns is different:
+
+   * "bool"
+
+   * "bytearray"
+
+   * "bytes"
+
+   * "dict"
+
+   * "float"
+
+   * "frozenset"
+
+   * "int"
+
+   * "list"
+
+   * "set"
+
+   * "str"
+
+   * "tuple"
+
+   These classes accept a single positional argument, and the pattern
+   there is matched against the whole object rather than an attribute.
+   For example "int(0|1)" matches the value "0", but not the value
+   "0.0".
+
+In simple terms "CLS(P1, attr=P2)" matches only if the following
+happens:
+
+* "isinstance(<subject>, CLS)"
+
+* convert "P1" to a keyword pattern using "CLS.__match_args__"
+
+* For each keyword argument "attr=P2":
+
+  * "hasattr(<subject>, "attr")"
+
+  * "P2" matches "<subject>.attr"
+
+* … and so on for the corresponding keyword argument/pattern pair.
+
+See also:
+
+  * **PEP 634** – Structural Pattern Matching: Specification
+
+  * **PEP 636** – Structural Pattern Matching: Tutorial
+
+
+Function definitions
+====================
+
+A function definition defines a user-defined function object (see
+section The standard type hierarchy):
+
+   funcdef:                   [decorators] "def" funcname [type_params] "(" [parameter_list] ")"
+                              ["->" expression] ":" suite
+   decorators:                decorator+
+   decorator:                 "@" assignment_expression NEWLINE
+   parameter_list:            defparameter ("," defparameter)* "," "/" ["," [parameter_list_no_posonly]]
+                                | parameter_list_no_posonly
+   parameter_list_no_posonly: defparameter ("," defparameter)* ["," [parameter_list_starargs]]
+                              | parameter_list_starargs
+   parameter_list_starargs:   "*" [star_parameter] ("," defparameter)* ["," [parameter_star_kwargs]]
+                              | "*" ("," defparameter)+ ["," [parameter_star_kwargs]]
+                              | parameter_star_kwargs
+   parameter_star_kwargs:     "**" parameter [","]
+   parameter:                 identifier [":" expression]
+   star_parameter:            identifier [":" ["*"] expression]
+   defparameter:              parameter ["=" expression]
+   funcname:                  identifier
+
+A function definition is an executable statement.  Its execution binds
+the function name in the current local namespace to a function object
+(a wrapper around the executable code for the function).  This
+function object contains a reference to the current global namespace
+as the global namespace to be used when the function is called.
+
+The function definition does not execute the function body; this gets
+executed only when the function is called. [4]
+
+A function definition may be wrapped by one or more *decorator*
+expressions. Decorator expressions are evaluated when the function is
+defined, in the scope that contains the function definition.  The
+result must be a callable, which is invoked with the function object
+as the only argument. The returned value is bound to the function name
+instead of the function object.  Multiple decorators are applied in
+nested fashion. For example, the following code
+
+   @f1(arg)
+   @f2
+   def func(): pass
+
+is roughly equivalent to
+
+   def func(): pass
+   func = f1(arg)(f2(func))
+
+except that the original function is not temporarily bound to the name
+"func".
+
+Changed in version 3.9: Functions may be decorated with any valid
+"assignment_expression". Previously, the grammar was much more
+restrictive; see **PEP 614** for details.
+
+A list of type parameters may be given in square brackets between the
+function’s name and the opening parenthesis for its parameter list.
+This indicates to static type checkers that the function is generic.
+At runtime, the type parameters can be retrieved from the function’s
+"__type_params__" attribute. See Generic functions for more.
+
+Changed in version 3.12: Type parameter lists are new in Python 3.12.
+
+When one or more *parameters* have the form *parameter* "="
+*expression*, the function is said to have “default parameter values.”
+For a parameter with a default value, the corresponding *argument* may
+be omitted from a call, in which case the parameter’s default value is
+substituted.  If a parameter has a default value, all following
+parameters up until the “"*"” must also have a default value — this is
+a syntactic restriction that is not expressed by the grammar.
+
+**Default parameter values are evaluated from left to right when the
+function definition is executed.** This means that the expression is
+evaluated once, when the function is defined, and that the same “pre-
+computed” value is used for each call.  This is especially important
+to understand when a default parameter value is a mutable object, such
+as a list or a dictionary: if the function modifies the object (e.g.
+by appending an item to a list), the default parameter value is in
+effect modified.  This is generally not what was intended.  A way
+around this is to use "None" as the default, and explicitly test for
+it in the body of the function, e.g.:
+
+   def whats_on_the_telly(penguin=None):
+       if penguin is None:
+           penguin = []
+       penguin.append("property of the zoo")
+       return penguin
+
+Function call semantics are described in more detail in section Calls.
+A function call always assigns values to all parameters mentioned in
+the parameter list, either from positional arguments, from keyword
+arguments, or from default values.  If the form “"*identifier"” is
+present, it is initialized to a tuple receiving any excess positional
+parameters, defaulting to the empty tuple. If the form
+“"**identifier"” is present, it is initialized to a new ordered
+mapping receiving any excess keyword arguments, defaulting to a new
+empty mapping of the same type.  Parameters after “"*"” or
+“"*identifier"” are keyword-only parameters and may only be passed by
+keyword arguments.  Parameters before “"/"” are positional-only
+parameters and may only be passed by positional arguments.
+
+Changed in version 3.8: The "/" function parameter syntax may be used
+to indicate positional-only parameters. See **PEP 570** for details.
+
+Parameters may have an *annotation* of the form “": expression"”
+following the parameter name.  Any parameter may have an annotation,
+even those of the form "*identifier" or "**identifier". (As a special
+case, parameters of the form "*identifier" may have an annotation “":
+*expression"”.) Functions may have “return” annotation of the form
+“"-> expression"” after the parameter list.  These annotations can be
+any valid Python expression.  The presence of annotations does not
+change the semantics of a function. See Annotations for more
+information on annotations.
+
+Changed in version 3.11: Parameters of the form “"*identifier"” may
+have an annotation “": *expression"”. See **PEP 646**.
+
+It is also possible to create anonymous functions (functions not bound
+to a name), for immediate use in expressions.  This uses lambda
+expressions, described in section Lambdas.  Note that the lambda
+expression is merely a shorthand for a simplified function definition;
+a function defined in a “"def"” statement can be passed around or
+assigned to another name just like a function defined by a lambda
+expression.  The “"def"” form is actually more powerful since it
+allows the execution of multiple statements and annotations.
+
+**Programmer’s note:** Functions are first-class objects.  A “"def"”
+statement executed inside a function definition defines a local
+function that can be returned or passed around.  Free variables used
+in the nested function can access the local variables of the function
+containing the def.  See section Naming and binding for details.
+
+See also:
+
+  **PEP 3107** - Function Annotations
+     The original specification for function annotations.
+
+  **PEP 484** - Type Hints
+     Definition of a standard meaning for annotations: type hints.
+
+  **PEP 526** - Syntax for Variable Annotations
+     Ability to type hint variable declarations, including class
+     variables and instance variables.
+
+  **PEP 563** - Postponed Evaluation of Annotations
+     Support for forward references within annotations by preserving
+     annotations in a string form at runtime instead of eager
+     evaluation.
+
+  **PEP 318** - Decorators for Functions and Methods
+     Function and method decorators were introduced. Class decorators
+     were introduced in **PEP 3129**.
+
+
+Class definitions
+=================
+
+A class definition defines a class object (see section The standard
+type hierarchy):
+
+   classdef:    [decorators] "class" classname [type_params] [inheritance] ":" suite
+   inheritance: "(" [argument_list] ")"
+   classname:   identifier
+
+A class definition is an executable statement.  The inheritance list
+usually gives a list of base classes (see Metaclasses for more
+advanced uses), so each item in the list should evaluate to a class
+object which allows subclassing.  Classes without an inheritance list
+inherit, by default, from the base class "object"; hence,
+
+   class Foo:
+       pass
+
+is equivalent to
+
+   class Foo(object):
+       pass
+
+The class’s suite is then executed in a new execution frame (see
+Naming and binding), using a newly created local namespace and the
+original global namespace. (Usually, the suite contains mostly
+function definitions.)  When the class’s suite finishes execution, its
+execution frame is discarded but its local namespace is saved. [5] A
+class object is then created using the inheritance list for the base
+classes and the saved local namespace for the attribute dictionary.
+The class name is bound to this class object in the original local
+namespace.
+
+The order in which attributes are defined in the class body is
+preserved in the new class’s "__dict__".  Note that this is reliable
+only right after the class is created and only for classes that were
+defined using the definition syntax.
+
+Class creation can be customized heavily using metaclasses.
+
+Classes can also be decorated: just like when decorating functions,
+
+   @f1(arg)
+   @f2
+   class Foo: pass
+
+is roughly equivalent to
+
+   class Foo: pass
+   Foo = f1(arg)(f2(Foo))
+
+The evaluation rules for the decorator expressions are the same as for
+function decorators.  The result is then bound to the class name.
+
+Changed in version 3.9: Classes may be decorated with any valid
+"assignment_expression". Previously, the grammar was much more
+restrictive; see **PEP 614** for details.
+
+A list of type parameters may be given in square brackets immediately
+after the class’s name. This indicates to static type checkers that
+the class is generic. At runtime, the type parameters can be retrieved
+from the class’s "__type_params__" attribute. See Generic classes for
+more.
+
+Changed in version 3.12: Type parameter lists are new in Python 3.12.
+
+**Programmer’s note:** Variables defined in the class definition are
+class attributes; they are shared by instances.  Instance attributes
+can be set in a method with "self.name = value".  Both class and
+instance attributes are accessible through the notation “"self.name"”,
+and an instance attribute hides a class attribute with the same name
+when accessed in this way.  Class attributes can be used as defaults
+for instance attributes, but using mutable values there can lead to
+unexpected results.  Descriptors can be used to create instance
+variables with different implementation details.
+
+See also:
+
+  **PEP 3115** - Metaclasses in Python 3000
+     The proposal that changed the declaration of metaclasses to the
+     current syntax, and the semantics for how classes with
+     metaclasses are constructed.
+
+  **PEP 3129** - Class Decorators
+     The proposal that added class decorators.  Function and method
+     decorators were introduced in **PEP 318**.
+
+
+Coroutines
+==========
+
+Added in version 3.5.
+
+
+Coroutine function definition
+-----------------------------
+
+   async_funcdef: [decorators] "async" "def" funcname "(" [parameter_list] ")"
+                  ["->" expression] ":" suite
+
+Execution of Python coroutines can be suspended and resumed at many
+points (see *coroutine*). "await" expressions, "async for" and "async
+with" can only be used in the body of a coroutine function.
+
+Functions defined with "async def" syntax are always coroutine
+functions, even if they do not contain "await" or "async" keywords.
+
+It is a "SyntaxError" to use a "yield from" expression inside the body
+of a coroutine function.
+
+An example of a coroutine function:
+
+   async def func(param1, param2):
+       do_stuff()
+       await some_coroutine()
+
+Changed in version 3.7: "await" and "async" are now keywords;
+previously they were only treated as such inside the body of a
+coroutine function.
+
+
+The "async for" statement
+-------------------------
+
+   async_for_stmt: "async" for_stmt
+
+An *asynchronous iterable* provides an "__aiter__" method that
+directly returns an *asynchronous iterator*, which can call
+asynchronous code in its "__anext__" method.
+
+The "async for" statement allows convenient iteration over
+asynchronous iterables.
+
+The following code:
+
+   async for TARGET in ITER:
+       SUITE
+   else:
+       SUITE2
+
+Is semantically equivalent to:
+
+   iter = (ITER).__aiter__()
+   running = True
+
+   while running:
+       try:
+           TARGET = await iter.__anext__()
+       except StopAsyncIteration:
+           running = False
+       else:
+           SUITE
+   else:
+       SUITE2
+
+except that implicit special method lookup is used for "__aiter__()"
+and "__anext__()".
+
+It is a "SyntaxError" to use an "async for" statement outside the body
+of a coroutine function.
+
+
+The "async with" statement
+--------------------------
+
+   async_with_stmt: "async" with_stmt
+
+An *asynchronous context manager* is a *context manager* that is able
+to suspend execution in its *enter* and *exit* methods.
+
+The following code:
+
+   async with EXPRESSION as TARGET:
+       SUITE
+
+is semantically equivalent to:
+
+   manager = (EXPRESSION)
+   aenter = manager.__aenter__
+   aexit = manager.__aexit__
+   value = await aenter()
+   hit_except = False
+
+   try:
+       TARGET = value
+       SUITE
+   except:
+       hit_except = True
+       if not await aexit(*sys.exc_info()):
+           raise
+   finally:
+       if not hit_except:
+           await aexit(None, None, None)
+
+except that implicit special method lookup is used for "__aenter__()"
+and "__aexit__()".
+
+It is a "SyntaxError" to use an "async with" statement outside the
+body of a coroutine function.
+
+See also:
+
+  **PEP 492** - Coroutines with async and await syntax
+     The proposal that made coroutines a proper standalone concept in
+     Python, and added supporting syntax.
+
+
+Type parameter lists
+====================
+
+Added in version 3.12.
+
+Changed in version 3.13: Support for default values was added (see
+**PEP 696**).
+
+   type_params:  "[" type_param ("," type_param)* "]"
+   type_param:   typevar | typevartuple | paramspec
+   typevar:      identifier (":" expression)? ("=" expression)?
+   typevartuple: "*" identifier ("=" expression)?
+   paramspec:    "**" identifier ("=" expression)?
+
+Functions (including coroutines), classes and type aliases may contain
+a type parameter list:
+
+   def max[T](args: list[T]) -> T:
+       ...
+
+   async def amax[T](args: list[T]) -> T:
+       ...
+
+   class Bag[T]:
+       def __iter__(self) -> Iterator[T]:
+           ...
+
+       def add(self, arg: T) -> None:
+           ...
+
+   type ListOrSet[T] = list[T] | set[T]
+
+Semantically, this indicates that the function, class, or type alias
+is generic over a type variable. This information is primarily used by
+static type checkers, and at runtime, generic objects behave much like
+their non-generic counterparts.
+
+Type parameters are declared in square brackets ("[]") immediately
+after the name of the function, class, or type alias. The type
+parameters are accessible within the scope of the generic object, but
+not elsewhere. Thus, after a declaration "def func[T](): pass", the
+name "T" is not available in the module scope. Below, the semantics of
+generic objects are described with more precision. The scope of type
+parameters is modeled with a special function (technically, an
+annotation scope) that wraps the creation of the generic object.
+
+Generic functions, classes, and type aliases have a "__type_params__"
+attribute listing their type parameters.
+
+Type parameters come in three kinds:
+
+* "typing.TypeVar", introduced by a plain name (e.g., "T").
+  Semantically, this represents a single type to a type checker.
+
+* "typing.TypeVarTuple", introduced by a name prefixed with a single
+  asterisk (e.g., "*Ts"). Semantically, this stands for a tuple of any
+  number of types.
+
+* "typing.ParamSpec", introduced by a name prefixed with two asterisks
+  (e.g., "**P"). Semantically, this stands for the parameters of a
+  callable.
+
+"typing.TypeVar" declarations can define *bounds* and *constraints*
+with a colon (":") followed by an expression. A single expression
+after the colon indicates a bound (e.g. "T: int"). Semantically, this
+means that the "typing.TypeVar" can only represent types that are a
+subtype of this bound. A parenthesized tuple of expressions after the
+colon indicates a set of constraints (e.g. "T: (str, bytes)"). Each
+member of the tuple should be a type (again, this is not enforced at
+runtime). Constrained type variables can only take on one of the types
+in the list of constraints.
+
+For "typing.TypeVar"s declared using the type parameter list syntax,
+the bound and constraints are not evaluated when the generic object is
+created, but only when the value is explicitly accessed through the
+attributes "__bound__" and "__constraints__". To accomplish this, the
+bounds or constraints are evaluated in a separate annotation scope.
+
+"typing.TypeVarTuple"s and "typing.ParamSpec"s cannot have bounds or
+constraints.
+
+All three flavors of type parameters can also have a *default value*,
+which is used when the type parameter is not explicitly provided. This
+is added by appending a single equals sign ("=") followed by an
+expression. Like the bounds and constraints of type variables, the
+default value is not evaluated when the object is created, but only
+when the type parameter’s "__default__" attribute is accessed. To this
+end, the default value is evaluated in a separate annotation scope. If
+no default value is specified for a type parameter, the "__default__"
+attribute is set to the special sentinel object "typing.NoDefault".
+
+The following example indicates the full set of allowed type parameter
+declarations:
+
+   def overly_generic[
+      SimpleTypeVar,
+      TypeVarWithDefault = int,
+      TypeVarWithBound: int,
+      TypeVarWithConstraints: (str, bytes),
+      *SimpleTypeVarTuple = (int, float),
+      **SimpleParamSpec = (str, bytearray),
+   ](
+      a: SimpleTypeVar,
+      b: TypeVarWithDefault,
+      c: TypeVarWithBound,
+      d: Callable[SimpleParamSpec, TypeVarWithConstraints],
+      *e: SimpleTypeVarTuple,
+   ): ...
+
+
+Generic functions
+-----------------
+
+Generic functions are declared as follows:
+
+   def func[T](arg: T): ...
+
+This syntax is equivalent to:
+
+   annotation-def TYPE_PARAMS_OF_func():
+       T = typing.TypeVar("T")
+       def func(arg: T): ...
+       func.__type_params__ = (T,)
+       return func
+   func = TYPE_PARAMS_OF_func()
+
+Here "annotation-def" indicates an annotation scope, which is not
+actually bound to any name at runtime. (One other liberty is taken in
+the translation: the syntax does not go through attribute access on
+the "typing" module, but creates an instance of "typing.TypeVar"
+directly.)
+
+The annotations of generic functions are evaluated within the
+annotation scope used for declaring the type parameters, but the
+function’s defaults and decorators are not.
+
+The following example illustrates the scoping rules for these cases,
+as well as for additional flavors of type parameters:
+
+   @decorator
+   def func[T: int, *Ts, **P](*args: *Ts, arg: Callable[P, T] = some_default):
+       ...
+
+Except for the lazy evaluation of the "TypeVar" bound, this is
+equivalent to:
+
+   DEFAULT_OF_arg = some_default
+
+   annotation-def TYPE_PARAMS_OF_func():
+
+       annotation-def BOUND_OF_T():
+           return int
+       # In reality, BOUND_OF_T() is evaluated only on demand.
+       T = typing.TypeVar("T", bound=BOUND_OF_T())
+
+       Ts = typing.TypeVarTuple("Ts")
+       P = typing.ParamSpec("P")
+
+       def func(*args: *Ts, arg: Callable[P, T] = DEFAULT_OF_arg):
+           ...
+
+       func.__type_params__ = (T, Ts, P)
+       return func
+   func = decorator(TYPE_PARAMS_OF_func())
+
+The capitalized names like "DEFAULT_OF_arg" are not actually bound at
+runtime.
+
+
+Generic classes
+---------------
+
+Generic classes are declared as follows:
+
+   class Bag[T]: ...
+
+This syntax is equivalent to:
+
+   annotation-def TYPE_PARAMS_OF_Bag():
+       T = typing.TypeVar("T")
+       class Bag(typing.Generic[T]):
+           __type_params__ = (T,)
+           ...
+       return Bag
+   Bag = TYPE_PARAMS_OF_Bag()
+
+Here again "annotation-def" (not a real keyword) indicates an
+annotation scope, and the name "TYPE_PARAMS_OF_Bag" is not actually
+bound at runtime.
+
+Generic classes implicitly inherit from "typing.Generic". The base
+classes and keyword arguments of generic classes are evaluated within
+the type scope for the type parameters, and decorators are evaluated
+outside that scope. This is illustrated by this example:
+
+   @decorator
+   class Bag(Base[T], arg=T): ...
+
+This is equivalent to:
+
+   annotation-def TYPE_PARAMS_OF_Bag():
+       T = typing.TypeVar("T")
+       class Bag(Base[T], typing.Generic[T], arg=T):
+           __type_params__ = (T,)
+           ...
+       return Bag
+   Bag = decorator(TYPE_PARAMS_OF_Bag())
+
+
+Generic type aliases
+--------------------
+
+The "type" statement can also be used to create a generic type alias:
+
+   type ListOrSet[T] = list[T] | set[T]
+
+Except for the lazy evaluation of the value, this is equivalent to:
+
+   annotation-def TYPE_PARAMS_OF_ListOrSet():
+       T = typing.TypeVar("T")
+
+       annotation-def VALUE_OF_ListOrSet():
+           return list[T] | set[T]
+       # In reality, the value is lazily evaluated
+       return typing.TypeAliasType("ListOrSet", VALUE_OF_ListOrSet(), type_params=(T,))
+   ListOrSet = TYPE_PARAMS_OF_ListOrSet()
+
+Here, "annotation-def" (not a real keyword) indicates an annotation
+scope. The capitalized names like "TYPE_PARAMS_OF_ListOrSet" are not
+actually bound at runtime.
+
+
+Annotations
+===========
+
+Changed in version 3.14: Annotations are now lazily evaluated by
+default.
+
+Variables and function parameters may carry *annotations*, created by
+adding a colon after the name, followed by an expression:
+
+   x: annotation = 1
+   def f(param: annotation): ...
+
+Functions may also carry a return annotation following an arrow:
+
+   def f() -> annotation: ...
+
+Annotations are conventionally used for *type hints*, but this is not
+enforced by the language, and in general annotations may contain
+arbitrary expressions. The presence of annotations does not change the
+runtime semantics of the code, except if some mechanism is used that
+introspects and uses the annotations (such as "dataclasses" or
+"functools.singledispatch()").
+
+By default, annotations are lazily evaluated in an annotation scope.
+This means that they are not evaluated when the code containing the
+annotation is evaluated. Instead, the interpreter saves information
+that can be used to evaluate the annotation later if requested. The
+"annotationlib" module provides tools for evaluating annotations.
+
+If the future statement "from __future__ import annotations" is
+present, all annotations are instead stored as strings:
+
+   >>> from __future__ import annotations
+   >>> def f(param: annotation): ...
+   >>> f.__annotations__
+   {'param': 'annotation'}
+
+This future statement will be deprecated and removed in a future
+version of Python, but not before Python 3.13 reaches its end of life
+(see **PEP 749**). When it is used, introspection tools like
+"annotationlib.get_annotations()" and "typing.get_type_hints()" are
+less likely to be able to resolve annotations at runtime.
+
+-[ Footnotes ]-
+
+[1] The exception is propagated to the invocation stack unless there
+    is a "finally" clause which happens to raise another exception.
+    That new exception causes the old one to be lost.
+
+[2] In pattern matching, a sequence is defined as one of the
+    following:
+
+    * a class that inherits from "collections.abc.Sequence"
+
+    * a Python class that has been registered as
+      "collections.abc.Sequence"
+
+    * a builtin class that has its (CPython) "Py_TPFLAGS_SEQUENCE" bit
+      set
+
+    * a class that inherits from any of the above
+
+    The following standard library classes are sequences:
+
+    * "array.array"
+
+    * "collections.deque"
+
+    * "list"
+
+    * "memoryview"
+
+    * "range"
+
+    * "tuple"
+
+    Note:
+
+      Subject values of type "str", "bytes", and "bytearray" do not
+      match sequence patterns.
+
+[3] In pattern matching, a mapping is defined as one of the following:
+
+    * a class that inherits from "collections.abc.Mapping"
+
+    * a Python class that has been registered as
+      "collections.abc.Mapping"
+
+    * a builtin class that has its (CPython) "Py_TPFLAGS_MAPPING" bit
+      set
+
+    * a class that inherits from any of the above
+
+    The standard library classes "dict" and "types.MappingProxyType"
+    are mappings.
+
+[4] A string literal appearing as the first statement in the function
+    body is transformed into the function’s "__doc__" attribute and
+    therefore the function’s *docstring*.
+
+[5] A string literal appearing as the first statement in the class
+    body is transformed into the namespace’s "__doc__" item and
+    therefore the class’s *docstring*.
+''',
+    'context-managers': r'''With Statement Context Managers
+*******************************
+
+A *context manager* is an object that defines the runtime context to
+be established when executing a "with" statement. The context manager
+handles the entry into, and the exit from, the desired runtime context
+for the execution of the block of code.  Context managers are normally
+invoked using the "with" statement (described in section The with
+statement), but can also be used by directly invoking their methods.
+
+Typical uses of context managers include saving and restoring various
+kinds of global state, locking and unlocking resources, closing opened
+files, etc.
+
+For more information on context managers, see Context Manager Types.
+The "object" class itself does not provide the context manager
+methods.
+
+object.__enter__(self)
+
+   Enter the runtime context related to this object. The "with"
+   statement will bind this method’s return value to the target(s)
+   specified in the "as" clause of the statement, if any.
+
+object.__exit__(self, exc_type, exc_value, traceback)
+
+   Exit the runtime context related to this object. The parameters
+   describe the exception that caused the context to be exited. If the
+   context was exited without an exception, all three arguments will
+   be "None".
+
+   If an exception is supplied, and the method wishes to suppress the
+   exception (i.e., prevent it from being propagated), it should
+   return a true value. Otherwise, the exception will be processed
+   normally upon exit from this method.
+
+   Note that "__exit__()" methods should not reraise the passed-in
+   exception; this is the caller’s responsibility.
+
+See also:
+
+  **PEP 343** - The “with” statement
+     The specification, background, and examples for the Python "with"
+     statement.
+''',
+    'continue': r'''The "continue" statement
+************************
+
+   continue_stmt: "continue"
+
+"continue" may only occur syntactically nested in a "for" or "while"
+loop, but not nested in a function or class definition within that
+loop.  It continues with the next cycle of the nearest enclosing loop.
+
+When "continue" passes control out of a "try" statement with a
+"finally" clause, that "finally" clause is executed before really
+starting the next loop cycle.
+''',
+    'conversions': r'''Arithmetic conversions
+**********************
+
+When a description of an arithmetic operator below uses the phrase
+“the numeric arguments are converted to a common real type”, this
+means that the operator implementation for built-in numeric types
+works as described in the Numeric Types section of the standard
+library documentation.
+
+Some additional rules apply for certain operators and non-numeric
+operands (for example, a string as a left argument to the "%"
+operator). Extensions must define their own conversion behavior.
+''',
+    'customization': r'''Basic customization
+*******************
+
+object.__new__(cls[, ...])
+
+   Called to create a new instance of class *cls*.  "__new__()" is a
+   static method (special-cased so you need not declare it as such)
+   that takes the class of which an instance was requested as its
+   first argument.  The remaining arguments are those passed to the
+   object constructor expression (the call to the class).  The return
+   value of "__new__()" should be the new object instance (usually an
+   instance of *cls*).
+
+   Typical implementations create a new instance of the class by
+   invoking the superclass’s "__new__()" method using
+   "super().__new__(cls[, ...])" with appropriate arguments and then
+   modifying the newly created instance as necessary before returning
+   it.
+
+   If "__new__()" is invoked during object construction and it returns
+   an instance of *cls*, then the new instance’s "__init__()" method
+   will be invoked like "__init__(self[, ...])", where *self* is the
+   new instance and the remaining arguments are the same as were
+   passed to the object constructor.
+
+   If "__new__()" does not return an instance of *cls*, then the new
+   instance’s "__init__()" method will not be invoked.
+
+   "__new__()" is intended mainly to allow subclasses of immutable
+   types (like int, str, or tuple) to customize instance creation.  It
+   is also commonly overridden in custom metaclasses in order to
+   customize class creation.
+
+object.__init__(self[, ...])
+
+   Called after the instance has been created (by "__new__()"), but
+   before it is returned to the caller.  The arguments are those
+   passed to the class constructor expression.  If a base class has an
+   "__init__()" method, the derived class’s "__init__()" method, if
+   any, must explicitly call it to ensure proper initialization of the
+   base class part of the instance; for example:
+   "super().__init__([args...])".
+
+   Because "__new__()" and "__init__()" work together in constructing
+   objects ("__new__()" to create it, and "__init__()" to customize
+   it), no non-"None" value may be returned by "__init__()"; doing so
+   will cause a "TypeError" to be raised at runtime.
+
+object.__del__(self)
+
+   Called when the instance is about to be destroyed.  This is also
+   called a finalizer or (improperly) a destructor.  If a base class
+   has a "__del__()" method, the derived class’s "__del__()" method,
+   if any, must explicitly call it to ensure proper deletion of the
+   base class part of the instance.
+
+   It is possible (though not recommended!) for the "__del__()" method
+   to postpone destruction of the instance by creating a new reference
+   to it.  This is called object *resurrection*.  It is
+   implementation-dependent whether "__del__()" is called a second
+   time when a resurrected object is about to be destroyed; the
+   current *CPython* implementation only calls it once.
+
+   It is not guaranteed that "__del__()" methods are called for
+   objects that still exist when the interpreter exits.
+   "weakref.finalize" provides a straightforward way to register a
+   cleanup function to be called when an object is garbage collected.
+
+   Note:
+
+     "del x" doesn’t directly call "x.__del__()" — the former
+     decrements the reference count for "x" by one, and the latter is
+     only called when "x"’s reference count reaches zero.
+
+   **CPython implementation detail:** It is possible for a reference
+   cycle to prevent the reference count of an object from going to
+   zero.  In this case, the cycle will be later detected and deleted
+   by the *cyclic garbage collector*.  A common cause of reference
+   cycles is when an exception has been caught in a local variable.
+   The frame’s locals then reference the exception, which references
+   its own traceback, which references the locals of all frames caught
+   in the traceback.
+
+   See also: Documentation for the "gc" module.
+
+   Warning:
+
+     Due to the precarious circumstances under which "__del__()"
+     methods are invoked, exceptions that occur during their execution
+     are ignored, and a warning is printed to "sys.stderr" instead.
+     In particular:
+
+     * "__del__()" can be invoked when arbitrary code is being
+       executed, including from any arbitrary thread.  If "__del__()"
+       needs to take a lock or invoke any other blocking resource, it
+       may deadlock as the resource may already be taken by the code
+       that gets interrupted to execute "__del__()".
+
+     * "__del__()" can be executed during interpreter shutdown.  As a
+       consequence, the global variables it needs to access (including
+       other modules) may already have been deleted or set to "None".
+       Python guarantees that globals whose name begins with a single
+       underscore are deleted from their module before other globals
+       are deleted; if no other references to such globals exist, this
+       may help in assuring that imported modules are still available
+       at the time when the "__del__()" method is called.
+
+object.__repr__(self)
+
+   Called by the "repr()" built-in function to compute the “official”
+   string representation of an object.  If at all possible, this
+   should look like a valid Python expression that could be used to
+   recreate an object with the same value (given an appropriate
+   environment).  If this is not possible, a string of the form
+   "<...some useful description...>" should be returned. The return
+   value must be a string object. If a class defines "__repr__()" but
+   not "__str__()", then "__repr__()" is also used when an “informal”
+   string representation of instances of that class is required.
+
+   This is typically used for debugging, so it is important that the
+   representation is information-rich and unambiguous. A default
+   implementation is provided by the "object" class itself.
+
+object.__str__(self)
+
+   Called by "str(object)", the default "__format__()" implementation,
+   and the built-in function "print()", to compute the “informal” or
+   nicely printable string representation of an object.  The return
+   value must be a str object.
+
+   This method differs from "object.__repr__()" in that there is no
+   expectation that "__str__()" return a valid Python expression: a
+   more convenient or concise representation can be used.
+
+   The default implementation defined by the built-in type "object"
+   calls "object.__repr__()".
+
+object.__bytes__(self)
+
+   Called by bytes to compute a byte-string representation of an
+   object. This should return a "bytes" object. The "object" class
+   itself does not provide this method.
+
+object.__format__(self, format_spec)
+
+   Called by the "format()" built-in function, and by extension,
+   evaluation of formatted string literals and the "str.format()"
+   method, to produce a “formatted” string representation of an
+   object. The *format_spec* argument is a string that contains a
+   description of the formatting options desired. The interpretation
+   of the *format_spec* argument is up to the type implementing
+   "__format__()", however most classes will either delegate
+   formatting to one of the built-in types, or use a similar
+   formatting option syntax.
+
+   See Format specification mini-language for a description of the
+   standard formatting syntax.
+
+   The return value must be a string object.
+
+   The default implementation by the "object" class should be given an
+   empty *format_spec* string. It delegates to "__str__()".
+
+   Changed in version 3.4: The __format__ method of "object" itself
+   raises a "TypeError" if passed any non-empty string.
+
+   Changed in version 3.7: "object.__format__(x, '')" is now
+   equivalent to "str(x)" rather than "format(str(x), '')".
+
+object.__lt__(self, other)
+object.__le__(self, other)
+object.__eq__(self, other)
+object.__ne__(self, other)
+object.__gt__(self, other)
+object.__ge__(self, other)
+
+   These are the so-called “rich comparison” methods. The
+   correspondence between operator symbols and method names is as
+   follows: "x<y" calls "x.__lt__(y)", "x<=y" calls "x.__le__(y)",
+   "x==y" calls "x.__eq__(y)", "x!=y" calls "x.__ne__(y)", "x>y" calls
+   "x.__gt__(y)", and "x>=y" calls "x.__ge__(y)".
+
+   A rich comparison method may return the singleton "NotImplemented"
+   if it does not implement the operation for a given pair of
+   arguments. By convention, "False" and "True" are returned for a
+   successful comparison. However, these methods can return any value,
+   so if the comparison operator is used in a Boolean context (e.g.,
+   in the condition of an "if" statement), Python will call "bool()"
+   on the value to determine if the result is true or false.
+
+   By default, "object" implements "__eq__()" by using "is", returning
+   "NotImplemented" in the case of a false comparison: "True if x is y
+   else NotImplemented". For "__ne__()", by default it delegates to
+   "__eq__()" and inverts the result unless it is "NotImplemented".
+   There are no other implied relationships among the comparison
+   operators or default implementations; for example, the truth of
+   "(x<y or x==y)" does not imply "x<=y". To automatically generate
+   ordering operations from a single root operation, see
+   "functools.total_ordering()".
+
+   By default, the "object" class provides implementations consistent
+   with Value comparisons: equality compares according to object
+   identity, and order comparisons raise "TypeError". Each default
+   method may generate these results directly, but may also return
+   "NotImplemented".
+
+   See the paragraph on "__hash__()" for some important notes on
+   creating *hashable* objects which support custom comparison
+   operations and are usable as dictionary keys.
+
+   There are no swapped-argument versions of these methods (to be used
+   when the left argument does not support the operation but the right
+   argument does); rather, "__lt__()" and "__gt__()" are each other’s
+   reflection, "__le__()" and "__ge__()" are each other’s reflection,
+   and "__eq__()" and "__ne__()" are their own reflection. If the
+   operands are of different types, and the right operand’s type is a
+   direct or indirect subclass of the left operand’s type, the
+   reflected method of the right operand has priority, otherwise the
+   left operand’s method has priority.  Virtual subclassing is not
+   considered.
+
+   When no appropriate method returns any value other than
+   "NotImplemented", the "==" and "!=" operators will fall back to
+   "is" and "is not", respectively.
+
+object.__hash__(self)
+
+   Called by built-in function "hash()" and for operations on members
+   of hashed collections including "set", "frozenset", and "dict".
+   The "__hash__()" method should return an integer. The only required
+   property is that objects which compare equal have the same hash
+   value; it is advised to mix together the hash values of the
+   components of the object that also play a part in comparison of
+   objects by packing them into a tuple and hashing the tuple.
+   Example:
+
+      def __hash__(self):
+          return hash((self.name, self.nick, self.color))
+
+   Note:
+
+     "hash()" truncates the value returned from an object’s custom
+     "__hash__()" method to the size of a "Py_ssize_t".  This is
+     typically 8 bytes on 64-bit builds and 4 bytes on 32-bit builds.
+     If an object’s   "__hash__()" must interoperate on builds of
+     different bit sizes, be sure to check the width on all supported
+     builds.  An easy way to do this is with "python -c "import sys;
+     print(sys.hash_info.width)"".
+
+   If a class does not define an "__eq__()" method it should not
+   define a "__hash__()" operation either; if it defines "__eq__()"
+   but not "__hash__()", its instances will not be usable as items in
+   hashable collections.  If a class defines mutable objects and
+   implements an "__eq__()" method, it should not implement
+   "__hash__()", since the implementation of *hashable* collections
+   requires that a key’s hash value is immutable (if the object’s hash
+   value changes, it will be in the wrong hash bucket).
+
+   User-defined classes have "__eq__()" and "__hash__()" methods by
+   default (inherited from the "object" class); with them, all objects
+   compare unequal (except with themselves) and "x.__hash__()" returns
+   an appropriate value such that "x == y" implies both that "x is y"
+   and "hash(x) == hash(y)".
+
+   A class that overrides "__eq__()" and does not define "__hash__()"
+   will have its "__hash__()" implicitly set to "None".  When the
+   "__hash__()" method of a class is "None", instances of the class
+   will raise an appropriate "TypeError" when a program attempts to
+   retrieve their hash value, and will also be correctly identified as
+   unhashable when checking "isinstance(obj,
+   collections.abc.Hashable)".
+
+   If a class that overrides "__eq__()" needs to retain the
+   implementation of "__hash__()" from a parent class, the interpreter
+   must be told this explicitly by setting "__hash__ =
+   <ParentClass>.__hash__".
+
+   If a class that does not override "__eq__()" wishes to suppress
+   hash support, it should include "__hash__ = None" in the class
+   definition. A class which defines its own "__hash__()" that
+   explicitly raises a "TypeError" would be incorrectly identified as
+   hashable by an "isinstance(obj, collections.abc.Hashable)" call.
+
+   Note:
+
+     By default, the "__hash__()" values of str and bytes objects are
+     “salted” with an unpredictable random value.  Although they
+     remain constant within an individual Python process, they are not
+     predictable between repeated invocations of Python.This is
+     intended to provide protection against a denial-of-service caused
+     by carefully chosen inputs that exploit the worst case
+     performance of a dict insertion, *O*(*n*^2) complexity.  See
+     https://ocert.org/advisories/ocert-2011-003.html for
+     details.Changing hash values affects the iteration order of sets.
+     Python has never made guarantees about this ordering (and it
+     typically varies between 32-bit and 64-bit builds).See also
+     "PYTHONHASHSEED".
+
+   Changed in version 3.3: Hash randomization is enabled by default.
+
+object.__bool__(self)
+
+   Called to implement truth value testing and the built-in operation
+   "bool()"; should return "False" or "True".  When this method is not
+   defined, "__len__()" is called, if it is defined, and the object is
+   considered true if its result is nonzero.  If a class defines
+   neither "__len__()" nor "__bool__()" (which is true of the "object"
+   class itself), all its instances are considered true.
+''',
+    'debugger': r'''"pdb" — The Python Debugger
+***************************
+
+**Source code:** Lib/pdb.py
+
+======================================================================
+
+The module "pdb" defines an interactive source code debugger for
+Python programs.  It supports setting (conditional) breakpoints and
+single stepping at the source line level, inspection of stack frames,
+source code listing, and evaluation of arbitrary Python code in the
+context of any stack frame.  It also supports post-mortem debugging
+and can be called under program control.
+
+The debugger is extensible – it is actually defined as the class
+"Pdb". This is currently undocumented but easily understood by reading
+the source.  The extension interface uses the modules "bdb" and "cmd".
+
+See also:
+
+  Module "faulthandler"
+     Used to dump Python tracebacks explicitly, on a fault, after a
+     timeout, or on a user signal.
+
+  Module "traceback"
+     Standard interface to extract, format and print stack traces of
+     Python programs.
+
+The typical usage to break into the debugger is to insert:
+
+   import pdb; pdb.set_trace()
+
+Or:
+
+   breakpoint()
+
+at the location you want to break into the debugger, and then run the
+program. You can then step through the code following this statement,
+and continue running without the debugger using the "continue"
+command.
+
+Changed in version 3.7: The built-in "breakpoint()", when called with
+defaults, can be used instead of "import pdb; pdb.set_trace()".
+
+   def double(x):
+      breakpoint()
+      return x * 2
+   val = 3
+   print(f"{val} * 2 is {double(val)}")
+
+The debugger’s prompt is "(Pdb)", which is the indicator that you are
+in debug mode:
+
+   > ...(2)double()
+   -> breakpoint()
+   (Pdb) p x
+   3
+   (Pdb) continue
+   3 * 2 is 6
+
+Changed in version 3.3: Tab-completion via the "readline" module is
+available for commands and command arguments, e.g. the current global
+and local names are offered as arguments of the "p" command.
+
+
+Command-line interface
+======================
+
+You can also invoke "pdb" from the command line to debug other
+scripts.  For example:
+
+   python -m pdb [-c command] (-m module | -p pid | pyfile) [args ...]
+
+When invoked as a module, pdb will automatically enter post-mortem
+debugging if the program being debugged exits abnormally.  After post-
+mortem debugging (or after normal exit of the program), pdb will
+restart the program.  Automatic restarting preserves pdb’s state (such
+as breakpoints) and in most cases is more useful than quitting the
+debugger upon program’s exit.
+
+-c, --command <command>
+
+   To execute commands as if given in a ".pdbrc" file; see Debugger
+   commands.
+
+   Changed in version 3.2: Added the "-c" option.
+
+-m <module>
+
+   To execute modules similar to the way "python -m" does. As with a
+   script, the debugger will pause execution just before the first
+   line of the module.
+
+   Changed in version 3.7: Added the "-m" option.
+
+-p, --pid <pid>
+
+   Attach to the process with the specified PID.
+
+   Added in version 3.14.
+
+To attach to a running Python process for remote debugging, use the
+"-p" or "--pid" option with the target process’s PID:
+
+   python -m pdb -p 1234
+
+Note:
+
+  Attaching to a process that is blocked in a system call or waiting
+  for I/O will only work once the next bytecode instruction is
+  executed or when the process receives a signal.
+
+Typical usage to execute a statement under control of the debugger is:
+
+   >>> import pdb
+   >>> def f(x):
+   ...     print(1 / x)
+   >>> pdb.run("f(2)")
+   > <string>(1)<module>()
+   (Pdb) continue
+   0.5
+   >>>
+
+The typical usage to inspect a crashed program is:
+
+   >>> import pdb
+   >>> def f(x):
+   ...     print(1 / x)
+   ...
+   >>> f(0)
+   Traceback (most recent call last):
+     File "<stdin>", line 1, in <module>
+     File "<stdin>", line 2, in f
+   ZeroDivisionError: division by zero
+   >>> pdb.pm()
+   > <stdin>(2)f()
+   (Pdb) p x
+   0
+   (Pdb)
+
+Changed in version 3.13: The implementation of **PEP 667** means that
+name assignments made via "pdb" will immediately affect the active
+scope, even when running inside an *optimized scope*.
+
+The module defines the following functions; each enters the debugger
+in a slightly different way:
+
+pdb.run(statement, globals=None, locals=None)
+
+   Execute the *statement* (given as a string or a code object) under
+   debugger control.  The debugger prompt appears before any code is
+   executed; you can set breakpoints and type "continue", or you can
+   step through the statement using "step" or "next" (all these
+   commands are explained below).  The optional *globals* and *locals*
+   arguments specify the environment in which the code is executed; by
+   default the dictionary of the module "__main__" is used.  (See the
+   explanation of the built-in "exec()" or "eval()" functions.)
+
+pdb.runeval(expression, globals=None, locals=None)
+
+   Evaluate the *expression* (given as a string or a code object)
+   under debugger control.  When "runeval()" returns, it returns the
+   value of the *expression*.  Otherwise this function is similar to
+   "run()".
+
+pdb.runcall(function, *args, **kwds)
+
+   Call the *function* (a function or method object, not a string)
+   with the given arguments.  When "runcall()" returns, it returns
+   whatever the function call returned.  The debugger prompt appears
+   as soon as the function is entered.
+
+pdb.set_trace(*, header=None, commands=None)
+
+   Enter the debugger at the calling stack frame.  This is useful to
+   hard-code a breakpoint at a given point in a program, even if the
+   code is not otherwise being debugged (e.g. when an assertion
+   fails).  If given, *header* is printed to the console just before
+   debugging begins. The *commands* argument, if given, is a list of
+   commands to execute when the debugger starts.
+
+   Changed in version 3.7: The keyword-only argument *header*.
+
+   Changed in version 3.13: "set_trace()" will enter the debugger
+   immediately, rather than on the next line of code to be executed.
+
+   Added in version 3.14: The *commands* argument.
+
+awaitable pdb.set_trace_async(*, header=None, commands=None)
+
+   async version of "set_trace()". This function should be used inside
+   an async function with "await".
+
+      async def f():
+          await pdb.set_trace_async()
+
+   "await" statements are supported if the debugger is invoked by this
+   function.
+
+   Added in version 3.14.
+
+pdb.post_mortem(t=None)
+
+   Enter post-mortem debugging of the given exception or traceback
+   object. If no value is given, it uses the exception that is
+   currently being handled, or raises "ValueError" if there isn’t one.
+
+   Changed in version 3.13: Support for exception objects was added.
+
+pdb.pm()
+
+   Enter post-mortem debugging of the exception found in
+   "sys.last_exc".
+
+pdb.set_default_backend(backend)
+
+   There are two supported backends for pdb: "'settrace'" and
+   "'monitoring'". See "bdb.Bdb" for details. The user can set the
+   default backend to use if none is specified when instantiating
+   "Pdb". If no backend is specified, the default is "'settrace'".
+
+   Note:
+
+     "breakpoint()" and "set_trace()" will not be affected by this
+     function. They always use "'monitoring'" backend.
+
+   Added in version 3.14.
+
+pdb.get_default_backend()
+
+   Returns the default backend for pdb.
+
+   Added in version 3.14.
+
+The "run*" functions and "set_trace()" are aliases for instantiating
+the "Pdb" class and calling the method of the same name.  If you want
+to access further features, you have to do this yourself:
+
+class pdb.Pdb(completekey='tab', stdin=None, stdout=None, skip=None, nosigint=False, readrc=True, mode=None, backend=None, colorize=False)
+
+   "Pdb" is the debugger class.
+
+   The *completekey*, *stdin* and *stdout* arguments are passed to the
+   underlying "cmd.Cmd" class; see the description there.
+
+   The *skip* argument, if given, must be an iterable of glob-style
+   module name patterns.  The debugger will not step into frames that
+   originate in a module that matches one of these patterns. [1]
+
+   By default, Pdb sets a handler for the SIGINT signal (which is sent
+   when the user presses "Ctrl"-"C" on the console) when you give a
+   "continue" command. This allows you to break into the debugger
+   again by pressing "Ctrl"-"C".  If you want Pdb not to touch the
+   SIGINT handler, set *nosigint* to true.
+
+   The *readrc* argument defaults to true and controls whether Pdb
+   will load .pdbrc files from the filesystem.
+
+   The *mode* argument specifies how the debugger was invoked. It
+   impacts the workings of some debugger commands. Valid values are
+   "'inline'" (used by the breakpoint() builtin), "'cli'" (used by the
+   command line invocation) or "None" (for backwards compatible
+   behaviour, as before the *mode* argument was added).
+
+   The *backend* argument specifies the backend to use for the
+   debugger. If "None" is passed, the default backend will be used.
+   See "set_default_backend()". Otherwise the supported backends are
+   "'settrace'" and "'monitoring'".
+
+   The *colorize* argument, if set to "True", will enable colorized
+   output in the debugger, if color is supported. This will highlight
+   source code displayed in pdb.
+
+   Example call to enable tracing with *skip*:
+
+      import pdb; pdb.Pdb(skip=['django.*']).set_trace()
+
+   Raises an auditing event "pdb.Pdb" with no arguments.
+
+   Changed in version 3.1: Added the *skip* parameter.
+
+   Changed in version 3.2: Added the *nosigint* parameter. Previously,
+   a SIGINT handler was never set by Pdb.
+
+   Changed in version 3.6: The *readrc* argument.
+
+   Added in version 3.14: Added the *mode* argument.
+
+   Added in version 3.14: Added the *backend* argument.
+
+   Added in version 3.14: Added the *colorize* argument.
+
+   Changed in version 3.14: Inline breakpoints like "breakpoint()" or
+   "pdb.set_trace()" will always stop the program at calling frame,
+   ignoring the *skip* pattern (if any).
+
+   run(statement, globals=None, locals=None)
+   runeval(expression, globals=None, locals=None)
+   runcall(function, *args, **kwds)
+   set_trace()
+
+      See the documentation for the functions explained above.
+
+
+Debugger commands
+=================
+
+The commands recognized by the debugger are listed below.  Most
+commands can be abbreviated to one or two letters as indicated; e.g.
+"h(elp)" means that either "h" or "help" can be used to enter the help
+command (but not "he" or "hel", nor "H" or "Help" or "HELP").
+Arguments to commands must be separated by whitespace (spaces or
+tabs).  Optional arguments are enclosed in square brackets ("[]") in
+the command syntax; the square brackets must not be typed.
+Alternatives in the command syntax are separated by a vertical bar
+("|").
+
+Entering a blank line repeats the last command entered.  Exception: if
+the last command was a "list" command, the next 11 lines are listed.
+
+Commands that the debugger doesn’t recognize are assumed to be Python
+statements and are executed in the context of the program being
+debugged.  Python statements can also be prefixed with an exclamation
+point ("!").  This is a powerful way to inspect the program being
+debugged; it is even possible to change a variable or call a function.
+When an exception occurs in such a statement, the exception name is
+printed but the debugger’s state is not changed.
+
+Changed in version 3.13: Expressions/Statements whose prefix is a pdb
+command are now correctly identified and executed.
+
+The debugger supports aliases.  Aliases can have parameters which
+allows one a certain level of adaptability to the context under
+examination.
+
+Multiple commands may be entered on a single line, separated by ";;".
+(A single ";" is not used as it is the separator for multiple commands
+in a line that is passed to the Python parser.)  No intelligence is
+applied to separating the commands; the input is split at the first
+";;" pair, even if it is in the middle of a quoted string. A
+workaround for strings with double semicolons is to use implicit
+string concatenation "';'';'" or "";"";"".
+
+To set a temporary global variable, use a *convenience variable*. A
+*convenience variable* is a variable whose name starts with "$".  For
+example, "$foo = 1" sets a global variable "$foo" which you can use in
+the debugger session.  The *convenience variables* are cleared when
+the program resumes execution so it’s less likely to interfere with
+your program compared to using normal variables like "foo = 1".
+
+There are four preset *convenience variables*:
+
+* "$_frame": the current frame you are debugging
+
+* "$_retval": the return value if the frame is returning
+
+* "$_exception": the exception if the frame is raising an exception
+
+* "$_asynctask": the asyncio task if pdb stops in an async function
+
+Added in version 3.12: Added the *convenience variable* feature.
+
+Added in version 3.14: Added the "$_asynctask" convenience variable.
+
+If a file ".pdbrc" exists in the user’s home directory or in the
+current directory, it is read with "'utf-8'" encoding and executed as
+if it had been typed at the debugger prompt, with the exception that
+empty lines and lines starting with "#" are ignored.  This is
+particularly useful for aliases.  If both files exist, the one in the
+home directory is read first and aliases defined there can be
+overridden by the local file.
+
+Changed in version 3.2: ".pdbrc" can now contain commands that
+continue debugging, such as "continue" or "next".  Previously, these
+commands had no effect.
+
+Changed in version 3.11: ".pdbrc" is now read with "'utf-8'" encoding.
+Previously, it was read with the system locale encoding.
+
+h(elp) [command]
+
+   Without argument, print the list of available commands.  With a
+   *command* as argument, print help about that command.  "help pdb"
+   displays the full documentation (the docstring of the "pdb"
+   module).  Since the *command* argument must be an identifier, "help
+   exec" must be entered to get help on the "!" command.
+
+w(here) [count]
+
+   Print a stack trace, with the most recent frame at the bottom.  if
+   *count* is 0, print the current frame entry. If *count* is
+   negative, print the least recent - *count* frames. If *count* is
+   positive, print the most recent *count* frames.  An arrow (">")
+   indicates the current frame, which determines the context of most
+   commands.
+
+   Changed in version 3.14: *count* argument is added.
+
+d(own) [count]
+
+   Move the current frame *count* (default one) levels down in the
+   stack trace (to a newer frame).
+
+u(p) [count]
+
+   Move the current frame *count* (default one) levels up in the stack
+   trace (to an older frame).
+
+b(reak) [([filename:]lineno | function) [, condition]]
+
+   With a *lineno* argument, set a break at line *lineno* in the
+   current file. The line number may be prefixed with a *filename* and
+   a colon, to specify a breakpoint in another file (possibly one that
+   hasn’t been loaded yet).  The file is searched on "sys.path".
+   Acceptable forms of *filename* are "/abspath/to/file.py",
+   "relpath/file.py", "module" and "package.module".
+
+   With a *function* argument, set a break at the first executable
+   statement within that function. *function* can be any expression
+   that evaluates to a function in the current namespace.
+
+   If a second argument is present, it is an expression which must
+   evaluate to true before the breakpoint is honored.
+
+   Without argument, list all breaks, including for each breakpoint,
+   the number of times that breakpoint has been hit, the current
+   ignore count, and the associated condition if any.
+
+   Each breakpoint is assigned a number to which all the other
+   breakpoint commands refer.
+
+tbreak [([filename:]lineno | function) [, condition]]
+
+   Temporary breakpoint, which is removed automatically when it is
+   first hit. The arguments are the same as for "break".
+
+cl(ear) [filename:lineno | bpnumber ...]
+
+   With a *filename:lineno* argument, clear all the breakpoints at
+   this line. With a space separated list of breakpoint numbers, clear
+   those breakpoints. Without argument, clear all breaks (but first
+   ask confirmation).
+
+disable bpnumber [bpnumber ...]
+
+   Disable the breakpoints given as a space separated list of
+   breakpoint numbers.  Disabling a breakpoint means it cannot cause
+   the program to stop execution, but unlike clearing a breakpoint, it
+   remains in the list of breakpoints and can be (re-)enabled.
+
+enable bpnumber [bpnumber ...]
+
+   Enable the breakpoints specified.
+
+ignore bpnumber [count]
+
+   Set the ignore count for the given breakpoint number.  If *count*
+   is omitted, the ignore count is set to 0.  A breakpoint becomes
+   active when the ignore count is zero.  When non-zero, the *count*
+   is decremented each time the breakpoint is reached and the
+   breakpoint is not disabled and any associated condition evaluates
+   to true.
+
+condition bpnumber [condition]
+
+   Set a new *condition* for the breakpoint, an expression which must
+   evaluate to true before the breakpoint is honored.  If *condition*
+   is absent, any existing condition is removed; i.e., the breakpoint
+   is made unconditional.
+
+commands [bpnumber]
+
+   Specify a list of commands for breakpoint number *bpnumber*.  The
+   commands themselves appear on the following lines.  Type a line
+   containing just "end" to terminate the commands. An example:
+
+      (Pdb) commands 1
+      (com) p some_variable
+      (com) end
+      (Pdb)
+
+   To remove all commands from a breakpoint, type "commands" and
+   follow it immediately with "end"; that is, give no commands.
+
+   With no *bpnumber* argument, "commands" refers to the last
+   breakpoint set.
+
+   You can use breakpoint commands to start your program up again.
+   Simply use the "continue" command, or "step", or any other command
+   that resumes execution.
+
+   Specifying any command resuming execution (currently "continue",
+   "step", "next", "return", "until", "jump", "quit" and their
+   abbreviations) terminates the command list (as if that command was
+   immediately followed by end). This is because any time you resume
+   execution (even with a simple next or step), you may encounter
+   another breakpoint—which could have its own command list, leading
+   to ambiguities about which list to execute.
+
+   If the list of commands contains the "silent" command, or a command
+   that resumes execution, then the breakpoint message containing
+   information about the frame is not displayed.
+
+   Changed in version 3.14: Frame information will not be displayed if
+   a command that resumes execution is present in the command list.
+
+s(tep)
+
+   Execute the current line, stop at the first possible occasion
+   (either in a function that is called or on the next line in the
+   current function).
+
+n(ext)
+
+   Continue execution until the next line in the current function is
+   reached or it returns.  (The difference between "next" and "step"
+   is that "step" stops inside a called function, while "next"
+   executes called functions at (nearly) full speed, only stopping at
+   the next line in the current function.)
+
+unt(il) [lineno]
+
+   Without argument, continue execution until the line with a number
+   greater than the current one is reached.
+
+   With *lineno*, continue execution until a line with a number
+   greater or equal to *lineno* is reached.  In both cases, also stop
+   when the current frame returns.
+
+   Changed in version 3.2: Allow giving an explicit line number.
+
+r(eturn)
+
+   Continue execution until the current function returns.
+
+c(ont(inue))
+
+   Continue execution, only stop when a breakpoint is encountered.
+
+j(ump) lineno
+
+   Set the next line that will be executed.  Only available in the
+   bottom-most frame.  This lets you jump back and execute code again,
+   or jump forward to skip code that you don’t want to run.
+
+   It should be noted that not all jumps are allowed – for instance it
+   is not possible to jump into the middle of a "for" loop or out of a
+   "finally" clause.
+
+l(ist) [first[, last]]
+
+   List source code for the current file.  Without arguments, list 11
+   lines around the current line or continue the previous listing.
+   With "." as argument, list 11 lines around the current line.  With
+   one argument, list 11 lines around at that line.  With two
+   arguments, list the given range; if the second argument is less
+   than the first, it is interpreted as a count.
+
+   The current line in the current frame is indicated by "->".  If an
+   exception is being debugged, the line where the exception was
+   originally raised or propagated is indicated by ">>", if it differs
+   from the current line.
+
+   Changed in version 3.2: Added the ">>" marker.
+
+ll | longlist
+
+   List all source code for the current function or frame.
+   Interesting lines are marked as for "list".
+
+   Added in version 3.2.
+
+a(rgs)
+
+   Print the arguments of the current function and their current
+   values.
+
+p expression
+
+   Evaluate *expression* in the current context and print its value.
+
+   Note:
+
+     "print()" can also be used, but is not a debugger command — this
+     executes the Python "print()" function.
+
+pp expression
+
+   Like the "p" command, except the value of *expression* is pretty-
+   printed using the "pprint" module.
+
+whatis expression
+
+   Print the type of *expression*.
+
+source expression
+
+   Try to get source code of *expression* and display it.
+
+   Added in version 3.2.
+
+display [expression]
+
+   Display the value of *expression* if it changed, each time
+   execution stops in the current frame.
+
+   Without *expression*, list all display expressions for the current
+   frame.
+
+   Note:
+
+     Display evaluates *expression* and compares to the result of the
+     previous evaluation of *expression*, so when the result is
+     mutable, display may not be able to pick up the changes.
+
+   Example:
+
+      lst = []
+      breakpoint()
+      pass
+      lst.append(1)
+      print(lst)
+
+   Display won’t realize "lst" has been changed because the result of
+   evaluation is modified in place by "lst.append(1)" before being
+   compared:
+
+      > example.py(3)<module>()
+      -> pass
+      (Pdb) display lst
+      display lst: []
+      (Pdb) n
+      > example.py(4)<module>()
+      -> lst.append(1)
+      (Pdb) n
+      > example.py(5)<module>()
+      -> print(lst)
+      (Pdb)
+
+   You can do some tricks with copy mechanism to make it work:
+
+      > example.py(3)<module>()
+      -> pass
+      (Pdb) display lst[:]
+      display lst[:]: []
+      (Pdb) n
+      > example.py(4)<module>()
+      -> lst.append(1)
+      (Pdb) n
+      > example.py(5)<module>()
+      -> print(lst)
+      display lst[:]: [1]  [old: []]
+      (Pdb)
+
+   Added in version 3.2.
+
+undisplay [expression]
+
+   Do not display *expression* anymore in the current frame.  Without
+   *expression*, clear all display expressions for the current frame.
+
+   Added in version 3.2.
+
+interact
+
+   Start an interactive interpreter (using the "code" module) in a new
+   global namespace initialised from the local and global namespaces
+   for the current scope. Use "exit()" or "quit()" to exit the
+   interpreter and return to the debugger.
+
+   Note:
+
+     As "interact" creates a new dedicated namespace for code
+     execution, assignments to variables will not affect the original
+     namespaces. However, modifications to any referenced mutable
+     objects will be reflected in the original namespaces as usual.
+
+   Added in version 3.2.
+
+   Changed in version 3.13: "exit()" and "quit()" can be used to exit
+   the "interact" command.
+
+   Changed in version 3.13: "interact" directs its output to the
+   debugger’s output channel rather than "sys.stderr".
+
+alias [name [command]]
+
+   Create an alias called *name* that executes *command*.  The
+   *command* must *not* be enclosed in quotes.  Replaceable parameters
+   can be indicated by "%1", "%2", … and "%9", while "%*" is replaced
+   by all the parameters. If *command* is omitted, the current alias
+   for *name* is shown. If no arguments are given, all aliases are
+   listed.
+
+   Aliases may be nested and can contain anything that can be legally
+   typed at the pdb prompt.  Note that internal pdb commands *can* be
+   overridden by aliases.  Such a command is then hidden until the
+   alias is removed.  Aliasing is recursively applied to the first
+   word of the command line; all other words in the line are left
+   alone.
+
+   As an example, here are two useful aliases (especially when placed
+   in the ".pdbrc" file):
+
+      # Print instance variables (usage "pi classInst")
+      alias pi for k in %1.__dict__.keys(): print(f"%1.{k} = {%1.__dict__[k]}")
+      # Print instance variables in self
+      alias ps pi self
+
+unalias name
+
+   Delete the specified alias *name*.
+
+! statement
+
+   Execute the (one-line) *statement* in the context of the current
+   stack frame. The exclamation point can be omitted unless the first
+   word of the statement resembles a debugger command, e.g.:
+
+      (Pdb) ! n=42
+      (Pdb)
+
+   To set a global variable, you can prefix the assignment command
+   with a "global" statement on the same line, e.g.:
+
+      (Pdb) global list_options; list_options = ['-l']
+      (Pdb)
+
+run [args ...]
+restart [args ...]
+
+   Restart the debugged Python program.  If *args* is supplied, it is
+   split with "shlex" and the result is used as the new "sys.argv".
+   History, breakpoints, actions and debugger options are preserved.
+   "restart" is an alias for "run".
+
+   Changed in version 3.14: "run" and "restart" commands are disabled
+   when the debugger is invoked in "'inline'" mode.
+
+q(uit)
+
+   Quit from the debugger.  The program being executed is aborted. An
+   end-of-file input is equivalent to "quit".
+
+   A confirmation prompt will be shown if the debugger is invoked in
+   "'inline'" mode. Either "y", "Y", "<Enter>" or "EOF" will confirm
+   the quit.
+
+   Changed in version 3.14: A confirmation prompt will be shown if the
+   debugger is invoked in "'inline'" mode. After the confirmation, the
+   debugger will call "sys.exit()" immediately, instead of raising
+   "bdb.BdbQuit" in the next trace event.
+
+debug code
+
+   Enter a recursive debugger that steps through *code* (which is an
+   arbitrary expression or statement to be executed in the current
+   environment).
+
+retval
+
+   Print the return value for the last return of the current function.
+
+exceptions [excnumber]
+
+   List or jump between chained exceptions.
+
+   When using "pdb.pm()"  or "Pdb.post_mortem(...)" with a chained
+   exception instead of a traceback, it allows the user to move
+   between the chained exceptions using "exceptions" command to list
+   exceptions, and "exceptions <number>" to switch to that exception.
+
+   Example:
+
+      def out():
+          try:
+              middle()
+          except Exception as e:
+              raise ValueError("reraise middle() error") from e
+
+      def middle():
+          try:
+              return inner(0)
+          except Exception as e:
+              raise ValueError("Middle fail")
+
+      def inner(x):
+          1 / x
+
+       out()
+
+   calling "pdb.pm()" will allow to move between exceptions:
+
+      > example.py(5)out()
+      -> raise ValueError("reraise middle() error") from e
+
+      (Pdb) exceptions
+        0 ZeroDivisionError('division by zero')
+        1 ValueError('Middle fail')
+      > 2 ValueError('reraise middle() error')
+
+      (Pdb) exceptions 0
+      > example.py(16)inner()
+      -> 1 / x
+
+      (Pdb) up
+      > example.py(10)middle()
+      -> return inner(0)
+
+   Added in version 3.13.
+
+-[ Footnotes ]-
+
+[1] Whether a frame is considered to originate in a certain module is
+    determined by the "__name__" in the frame globals.
+''',
+    'del': r'''The "del" statement
+*******************
+
+   del_stmt: "del" target_list
+
+Deletion is recursively defined very similar to the way assignment is
+defined. Rather than spelling it out in full details, here are some
+hints.
+
+Deletion of a target list recursively deletes each target, from left
+to right.
+
+Deletion of a name removes the binding of that name from the local or
+global namespace, depending on whether the name occurs in a "global"
+statement in the same code block.  Trying to delete an unbound name
+raises a "NameError" exception.
+
+Deletion of attribute references and subscriptions is passed to the
+primary object involved; deletion of a slicing is in general
+equivalent to assignment of an empty slice of the right type (but even
+this is determined by the sliced object).
+
+Changed in version 3.2: Previously it was illegal to delete a name
+from the local namespace if it occurs as a free variable in a nested
+block.
+''',
+    'dict': r'''Dictionary displays
+*******************
+
+A dictionary display is a possibly empty series of dict items
+(key/value pairs) enclosed in curly braces:
+
+   dict_display:       "{" [dict_item_list | dict_comprehension] "}"
+   dict_item_list:     dict_item ("," dict_item)* [","]
+   dict_item:          expression ":" expression | "**" or_expr
+   dict_comprehension: expression ":" expression comp_for
+
+A dictionary display yields a new dictionary object.
+
+If a comma-separated sequence of dict items is given, they are
+evaluated from left to right to define the entries of the dictionary:
+each key object is used as a key into the dictionary to store the
+corresponding value.  This means that you can specify the same key
+multiple times in the dict item list, and the final dictionary’s value
+for that key will be the last one given.
+
+A double asterisk "**" denotes *dictionary unpacking*. Its operand
+must be a *mapping*.  Each mapping item is added to the new
+dictionary.  Later values replace values already set by earlier dict
+items and earlier dictionary unpackings.
+
+Added in version 3.5: Unpacking into dictionary displays, originally
+proposed by **PEP 448**.
+
+A dict comprehension, in contrast to list and set comprehensions,
+needs two expressions separated with a colon followed by the usual
+“for” and “if” clauses. When the comprehension is run, the resulting
+key and value elements are inserted in the new dictionary in the order
+they are produced.
+
+Restrictions on the types of the key values are listed earlier in
+section The standard type hierarchy.  (To summarize, the key type
+should be *hashable*, which excludes all mutable objects.)  Clashes
+between duplicate keys are not detected; the last value (textually
+rightmost in the display) stored for a given key value prevails.
+
+Changed in version 3.8: Prior to Python 3.8, in dict comprehensions,
+the evaluation order of key and value was not well-defined.  In
+CPython, the value was evaluated before the key.  Starting with 3.8,
+the key is evaluated before the value, as proposed by **PEP 572**.
+''',
+    'dynamic-features': r'''Interaction with dynamic features
+*********************************
+
+Name resolution of free variables occurs at runtime, not at compile
+time. This means that the following code will print 42:
+
+   i = 10
+   def f():
+       print(i)
+   i = 42
+   f()
+
+The "eval()" and "exec()" functions do not have access to the full
+environment for resolving names.  Names may be resolved in the local
+and global namespaces of the caller.  Free variables are not resolved
+in the nearest enclosing namespace, but in the global namespace.  [1]
+The "exec()" and "eval()" functions have optional arguments to
+override the global and local namespace.  If only one namespace is
+specified, it is used for both.
+''',
+    'else': r'''The "if" statement
+******************
+
+The "if" statement is used for conditional execution:
+
+   if_stmt: "if" assignment_expression ":" suite
+            ("elif" assignment_expression ":" suite)*
+            ["else" ":" suite]
+
+It selects exactly one of the suites by evaluating the expressions one
+by one until one is found to be true (see section Boolean operations
+for the definition of true and false); then that suite is executed
+(and no other part of the "if" statement is executed or evaluated).
+If all expressions are false, the suite of the "else" clause, if
+present, is executed.
+''',
+    'exceptions': r'''Exceptions
+**********
+
+Exceptions are a means of breaking out of the normal flow of control
+of a code block in order to handle errors or other exceptional
+conditions.  An exception is *raised* at the point where the error is
+detected; it may be *handled* by the surrounding code block or by any
+code block that directly or indirectly invoked the code block where
+the error occurred.
+
+The Python interpreter raises an exception when it detects a run-time
+error (such as division by zero).  A Python program can also
+explicitly raise an exception with the "raise" statement. Exception
+handlers are specified with the "try" … "except" statement.  The
+"finally" clause of such a statement can be used to specify cleanup
+code which does not handle the exception, but is executed whether an
+exception occurred or not in the preceding code.
+
+Python uses the “termination” model of error handling: an exception
+handler can find out what happened and continue execution at an outer
+level, but it cannot repair the cause of the error and retry the
+failing operation (except by re-entering the offending piece of code
+from the top).
+
+When an exception is not handled at all, the interpreter terminates
+execution of the program, or returns to its interactive main loop.  In
+either case, it prints a stack traceback, except when the exception is
+"SystemExit".
+
+Exceptions are identified by class instances.  The "except" clause is
+selected depending on the class of the instance: it must reference the
+class of the instance or a *non-virtual base class* thereof. The
+instance can be received by the handler and can carry additional
+information about the exceptional condition.
+
+Note:
+
+  Exception messages are not part of the Python API.  Their contents
+  may change from one version of Python to the next without warning
+  and should not be relied on by code which will run under multiple
+  versions of the interpreter.
+
+See also the description of the "try" statement in section The try
+statement and "raise" statement in section The raise statement.
+''',
+    'execmodel': r'''Execution model
+***************
+
+
+Structure of a program
+======================
+
+A Python program is constructed from code blocks. A *block* is a piece
+of Python program text that is executed as a unit. The following are
+blocks: a module, a function body, and a class definition. Each
+command typed interactively is a block.  A script file (a file given
+as standard input to the interpreter or specified as a command line
+argument to the interpreter) is a code block.  A script command (a
+command specified on the interpreter command line with the "-c"
+option) is a code block. A module run as a top level script (as module
+"__main__") from the command line using a "-m" argument is also a code
+block. The string argument passed to the built-in functions "eval()"
+and "exec()" is a code block.
+
+A code block is executed in an *execution frame*.  A frame contains
+some administrative information (used for debugging) and determines
+where and how execution continues after the code block’s execution has
+completed.
+
+
+Naming and binding
+==================
+
+
+Binding of names
+----------------
+
+*Names* refer to objects.  Names are introduced by name binding
+operations.
+
+The following constructs bind names:
+
+* formal parameters to functions,
+
+* class definitions,
+
+* function definitions,
+
+* assignment expressions,
+
+* targets that are identifiers if occurring in an assignment:
+
+  * "for" loop header,
+
+  * after "as" in a "with" statement, "except" clause, "except*"
+    clause, or in the as-pattern in structural pattern matching,
+
+  * in a capture pattern in structural pattern matching
+
+* "import" statements.
+
+* "type" statements.
+
+* type parameter lists.
+
+The "import" statement of the form "from ... import *" binds all names
+defined in the imported module, except those beginning with an
+underscore. This form may only be used at the module level.
+
+A target occurring in a "del" statement is also considered bound for
+this purpose (though the actual semantics are to unbind the name).
+
+Each assignment or import statement occurs within a block defined by a
+class or function definition or at the module level (the top-level
+code block).
+
+If a name is bound in a block, it is a local variable of that block,
+unless declared as "nonlocal" or "global".  If a name is bound at the
+module level, it is a global variable.  (The variables of the module
+code block are local and global.)  If a variable is used in a code
+block but not defined there, it is a *free variable*.
+
+Each occurrence of a name in the program text refers to the *binding*
+of that name established by the following name resolution rules.
+
+
+Resolution of names
+-------------------
+
+A *scope* defines the visibility of a name within a block.  If a local
+variable is defined in a block, its scope includes that block.  If the
+definition occurs in a function block, the scope extends to any blocks
+contained within the defining one, unless a contained block introduces
+a different binding for the name.
+
+When a name is used in a code block, it is resolved using the nearest
+enclosing scope.  The set of all such scopes visible to a code block
+is called the block’s *environment*.
+
+When a name is not found at all, a "NameError" exception is raised. If
+the current scope is a function scope, and the name refers to a local
+variable that has not yet been bound to a value at the point where the
+name is used, an "UnboundLocalError" exception is raised.
+"UnboundLocalError" is a subclass of "NameError".
+
+If a name binding operation occurs anywhere within a code block, all
+uses of the name within the block are treated as references to the
+current block.  This can lead to errors when a name is used within a
+block before it is bound.  This rule is subtle.  Python lacks
+declarations and allows name binding operations to occur anywhere
+within a code block.  The local variables of a code block can be
+determined by scanning the entire text of the block for name binding
+operations. See the FAQ entry on UnboundLocalError for examples.
+
+If the "global" statement occurs within a block, all uses of the names
+specified in the statement refer to the bindings of those names in the
+top-level namespace.  Names are resolved in the top-level namespace by
+searching the global namespace, i.e. the namespace of the module
+containing the code block, and the builtins namespace, the namespace
+of the module "builtins".  The global namespace is searched first.  If
+the names are not found there, the builtins namespace is searched
+next. If the names are also not found in the builtins namespace, new
+variables are created in the global namespace. The global statement
+must precede all uses of the listed names.
+
+The "global" statement has the same scope as a name binding operation
+in the same block.  If the nearest enclosing scope for a free variable
+contains a global statement, the free variable is treated as a global.
+
+The "nonlocal" statement causes corresponding names to refer to
+previously bound variables in the nearest enclosing function scope.
+"SyntaxError" is raised at compile time if the given name does not
+exist in any enclosing function scope. Type parameters cannot be
+rebound with the "nonlocal" statement.
+
+The namespace for a module is automatically created the first time a
+module is imported.  The main module for a script is always called
+"__main__".
+
+Class definition blocks and arguments to "exec()" and "eval()" are
+special in the context of name resolution. A class definition is an
+executable statement that may use and define names. These references
+follow the normal rules for name resolution with an exception that
+unbound local variables are looked up in the global namespace. The
+namespace of the class definition becomes the attribute dictionary of
+the class. The scope of names defined in a class block is limited to
+the class block; it does not extend to the code blocks of methods.
+This includes comprehensions and generator expressions, but it does
+not include annotation scopes, which have access to their enclosing
+class scopes. This means that the following will fail:
+
+   class A:
+       a = 42
+       b = list(a + i for i in range(10))
+
+However, the following will succeed:
+
+   class A:
+       type Alias = Nested
+       class Nested: pass
+
+   print(A.Alias.__value__)  # <type 'A.Nested'>
+
+
+Annotation scopes
+-----------------
+
+*Annotations*, type parameter lists and "type" statements introduce
+*annotation scopes*, which behave mostly like function scopes, but
+with some exceptions discussed below.
+
+Annotation scopes are used in the following contexts:
+
+* *Function annotations*.
+
+* *Variable annotations*.
+
+* Type parameter lists for generic type aliases.
+
+* Type parameter lists for generic functions. A generic function’s
+  annotations are executed within the annotation scope, but its
+  defaults and decorators are not.
+
+* Type parameter lists for generic classes. A generic class’s base
+  classes and keyword arguments are executed within the annotation
+  scope, but its decorators are not.
+
+* The bounds, constraints, and default values for type parameters
+  (lazily evaluated).
+
+* The value of type aliases (lazily evaluated).
+
+Annotation scopes differ from function scopes in the following ways:
+
+* Annotation scopes have access to their enclosing class namespace. If
+  an annotation scope is immediately within a class scope, or within
+  another annotation scope that is immediately within a class scope,
+  the code in the annotation scope can use names defined in the class
+  scope as if it were executed directly within the class body. This
+  contrasts with regular functions defined within classes, which
+  cannot access names defined in the class scope.
+
+* Expressions in annotation scopes cannot contain "yield", "yield
+  from", "await", or ":=" expressions. (These expressions are allowed
+  in other scopes contained within the annotation scope.)
+
+* Names defined in annotation scopes cannot be rebound with "nonlocal"
+  statements in inner scopes. This includes only type parameters, as
+  no other syntactic elements that can appear within annotation scopes
+  can introduce new names.
+
+* While annotation scopes have an internal name, that name is not
+  reflected in the *qualified name* of objects defined within the
+  scope. Instead, the "__qualname__" of such objects is as if the
+  object were defined in the enclosing scope.
+
+Added in version 3.12: Annotation scopes were introduced in Python
+3.12 as part of **PEP 695**.
+
+Changed in version 3.13: Annotation scopes are also used for type
+parameter defaults, as introduced by **PEP 696**.
+
+Changed in version 3.14: Annotation scopes are now also used for
+annotations, as specified in **PEP 649** and **PEP 749**.
+
+
+Lazy evaluation
+---------------
+
+Most annotation scopes are *lazily evaluated*. This includes
+annotations, the values of type aliases created through the "type"
+statement, and the bounds, constraints, and default values of type
+variables created through the type parameter syntax. This means that
+they are not evaluated when the type alias or type variable is
+created, or when the object carrying annotations is created. Instead,
+they are only evaluated when necessary, for example when the
+"__value__" attribute on a type alias is accessed.
+
+Example:
+
+   >>> type Alias = 1/0
+   >>> Alias.__value__
+   Traceback (most recent call last):
+     ...
+   ZeroDivisionError: division by zero
+   >>> def func[T: 1/0](): pass
+   >>> T = func.__type_params__[0]
+   >>> T.__bound__
+   Traceback (most recent call last):
+     ...
+   ZeroDivisionError: division by zero
+
+Here the exception is raised only when the "__value__" attribute of
+the type alias or the "__bound__" attribute of the type variable is
+accessed.
+
+This behavior is primarily useful for references to types that have
+not yet been defined when the type alias or type variable is created.
+For example, lazy evaluation enables creation of mutually recursive
+type aliases:
+
+   from typing import Literal
+
+   type SimpleExpr = int | Parenthesized
+   type Parenthesized = tuple[Literal["("], Expr, Literal[")"]]
+   type Expr = SimpleExpr | tuple[SimpleExpr, Literal["+", "-"], Expr]
+
+Lazily evaluated values are evaluated in annotation scope, which means
+that names that appear inside the lazily evaluated value are looked up
+as if they were used in the immediately enclosing scope.
+
+Added in version 3.12.
+
+
+Builtins and restricted execution
+---------------------------------
+
+**CPython implementation detail:** Users should not touch
+"__builtins__"; it is strictly an implementation detail.  Users
+wanting to override values in the builtins namespace should "import"
+the "builtins" module and modify its attributes appropriately.
+
+The builtins namespace associated with the execution of a code block
+is actually found by looking up the name "__builtins__" in its global
+namespace; this should be a dictionary or a module (in the latter case
+the module’s dictionary is used).  By default, when in the "__main__"
+module, "__builtins__" is the built-in module "builtins"; when in any
+other module, "__builtins__" is an alias for the dictionary of the
+"builtins" module itself.
+
+
+Interaction with dynamic features
+---------------------------------
+
+Name resolution of free variables occurs at runtime, not at compile
+time. This means that the following code will print 42:
+
+   i = 10
+   def f():
+       print(i)
+   i = 42
+   f()
+
+The "eval()" and "exec()" functions do not have access to the full
+environment for resolving names.  Names may be resolved in the local
+and global namespaces of the caller.  Free variables are not resolved
+in the nearest enclosing namespace, but in the global namespace.  [1]
+The "exec()" and "eval()" functions have optional arguments to
+override the global and local namespace.  If only one namespace is
+specified, it is used for both.
+
+
+Exceptions
+==========
+
+Exceptions are a means of breaking out of the normal flow of control
+of a code block in order to handle errors or other exceptional
+conditions.  An exception is *raised* at the point where the error is
+detected; it may be *handled* by the surrounding code block or by any
+code block that directly or indirectly invoked the code block where
+the error occurred.
+
+The Python interpreter raises an exception when it detects a run-time
+error (such as division by zero).  A Python program can also
+explicitly raise an exception with the "raise" statement. Exception
+handlers are specified with the "try" … "except" statement.  The
+"finally" clause of such a statement can be used to specify cleanup
+code which does not handle the exception, but is executed whether an
+exception occurred or not in the preceding code.
+
+Python uses the “termination” model of error handling: an exception
+handler can find out what happened and continue execution at an outer
+level, but it cannot repair the cause of the error and retry the
+failing operation (except by re-entering the offending piece of code
+from the top).
+
+When an exception is not handled at all, the interpreter terminates
+execution of the program, or returns to its interactive main loop.  In
+either case, it prints a stack traceback, except when the exception is
+"SystemExit".
+
+Exceptions are identified by class instances.  The "except" clause is
+selected depending on the class of the instance: it must reference the
+class of the instance or a *non-virtual base class* thereof. The
+instance can be received by the handler and can carry additional
+information about the exceptional condition.
+
+Note:
+
+  Exception messages are not part of the Python API.  Their contents
+  may change from one version of Python to the next without warning
+  and should not be relied on by code which will run under multiple
+  versions of the interpreter.
+
+See also the description of the "try" statement in section The try
+statement and "raise" statement in section The raise statement.
+
+
+Runtime Components
+==================
+
+
+General Computing Model
+-----------------------
+
+Python’s execution model does not operate in a vacuum.  It runs on a
+host machine and through that host’s runtime environment, including
+its operating system (OS), if there is one.  When a program runs, the
+conceptual layers of how it runs on the host look something like this:
+
+      **host machine**
+         **process** (global resources)
+            **thread** (runs machine code)
+
+Each process represents a program running on the host.  Think of each
+process itself as the data part of its program.  Think of the process’
+threads as the execution part of the program.  This distinction will
+be important to understand the conceptual Python runtime.
+
+The process, as the data part, is the execution context in which the
+program runs.  It mostly consists of the set of resources assigned to
+the program by the host, including memory, signals, file handles,
+sockets, and environment variables.
+
+Processes are isolated and independent from one another.  (The same is
+true for hosts.)  The host manages the process’ access to its assigned
+resources, in addition to coordinating between processes.
+
+Each thread represents the actual execution of the program’s machine
+code, running relative to the resources assigned to the program’s
+process.  It’s strictly up to the host how and when that execution
+takes place.
+
+From the point of view of Python, a program always starts with exactly
+one thread.  However, the program may grow to run in multiple
+simultaneous threads.  Not all hosts support multiple threads per
+process, but most do.  Unlike processes, threads in a process are not
+isolated and independent from one another.  Specifically, all threads
+in a process share all of the process’ resources.
+
+The fundamental point of threads is that each one does *run*
+independently, at the same time as the others.  That may be only
+conceptually at the same time (“concurrently”) or physically (“in
+parallel”).  Either way, the threads effectively run at a non-
+synchronized rate.
+
+Note:
+
+  That non-synchronized rate means none of the process’ memory is
+  guaranteed to stay consistent for the code running in any given
+  thread.  Thus multi-threaded programs must take care to coordinate
+  access to intentionally shared resources.  Likewise, they must take
+  care to be absolutely diligent about not accessing any *other*
+  resources in multiple threads; otherwise two threads running at the
+  same time might accidentally interfere with each other’s use of some
+  shared data.  All this is true for both Python programs and the
+  Python runtime.The cost of this broad, unstructured requirement is
+  the tradeoff for the kind of raw concurrency that threads provide.
+  The alternative to the required discipline generally means dealing
+  with non-deterministic bugs and data corruption.
+
+
+Python Runtime Model
+--------------------
+
+The same conceptual layers apply to each Python program, with some
+extra data layers specific to Python:
+
+      **host machine**
+         **process** (global resources)
+            Python global runtime (*state*)
+               Python interpreter (*state*)
+                  **thread** (runs Python bytecode and “C-API”)
+                     Python thread *state*
+
+At the conceptual level: when a Python program starts, it looks
+exactly like that diagram, with one of each.  The runtime may grow to
+include multiple interpreters, and each interpreter may grow to
+include multiple thread states.
+
+Note:
+
+  A Python implementation won’t necessarily implement the runtime
+  layers distinctly or even concretely.  The only exception is places
+  where distinct layers are directly specified or exposed to users,
+  like through the "threading" module.
+
+Note:
+
+  The initial interpreter is typically called the “main” interpreter.
+  Some Python implementations, like CPython, assign special roles to
+  the main interpreter.Likewise, the host thread where the runtime was
+  initialized is known as the “main” thread.  It may be different from
+  the process’ initial thread, though they are often the same.  In
+  some cases “main thread” may be even more specific and refer to the
+  initial thread state. A Python runtime might assign specific
+  responsibilities to the main thread, such as handling signals.
+
+As a whole, the Python runtime consists of the global runtime state,
+interpreters, and thread states.  The runtime ensures all that state
+stays consistent over its lifetime, particularly when used with
+multiple host threads.
+
+The global runtime, at the conceptual level, is just a set of
+interpreters.  While those interpreters are otherwise isolated and
+independent from one another, they may share some data or other
+resources.  The runtime is responsible for managing these global
+resources safely.  The actual nature and management of these resources
+is implementation-specific.  Ultimately, the external utility of the
+global runtime is limited to managing interpreters.
+
+In contrast, an “interpreter” is conceptually what we would normally
+think of as the (full-featured) “Python runtime”.  When machine code
+executing in a host thread interacts with the Python runtime, it calls
+into Python in the context of a specific interpreter.
+
+Note:
+
+  The term “interpreter” here is not the same as the “bytecode
+  interpreter”, which is what regularly runs in threads, executing
+  compiled Python code.In an ideal world, “Python runtime” would refer
+  to what we currently call “interpreter”.  However, it’s been called
+  “interpreter” at least since introduced in 1997 (CPython:a027efa5b).
+
+Each interpreter completely encapsulates all of the non-process-
+global, non-thread-specific state needed for the Python runtime to
+work. Notably, the interpreter’s state persists between uses.  It
+includes fundamental data like "sys.modules".  The runtime ensures
+multiple threads using the same interpreter will safely share it
+between them.
+
+A Python implementation may support using multiple interpreters at the
+same time in the same process.  They are independent and isolated from
+one another.  For example, each interpreter has its own "sys.modules".
+
+For thread-specific runtime state, each interpreter has a set of
+thread states, which it manages, in the same way the global runtime
+contains a set of interpreters.  It can have thread states for as many
+host threads as it needs.  It may even have multiple thread states for
+the same host thread, though that isn’t as common.
+
+Each thread state, conceptually, has all the thread-specific runtime
+data an interpreter needs to operate in one host thread.  The thread
+state includes the current raised exception and the thread’s Python
+call stack.  It may include other thread-specific resources.
+
+Note:
+
+  The term “Python thread” can sometimes refer to a thread state, but
+  normally it means a thread created using the "threading" module.
+
+Each thread state, over its lifetime, is always tied to exactly one
+interpreter and exactly one host thread.  It will only ever be used in
+that thread and with that interpreter.
+
+Multiple thread states may be tied to the same host thread, whether
+for different interpreters or even the same interpreter.  However, for
+any given host thread, only one of the thread states tied to it can be
+used by the thread at a time.
+
+Thread states are isolated and independent from one another and don’t
+share any data, except for possibly sharing an interpreter and objects
+or other resources belonging to that interpreter.
+
+Once a program is running, new Python threads can be created using the
+"threading" module (on platforms and Python implementations that
+support threads).  Additional processes can be created using the "os",
+"subprocess", and "multiprocessing" modules. Interpreters can be
+created and used with the "interpreters" module.  Coroutines (async)
+can be run using "asyncio" in each interpreter, typically only in a
+single thread (often the main thread).
+
+-[ Footnotes ]-
+
+[1] This limitation occurs because the code that is executed by these
+    operations is not available at the time the module is compiled.
+''',
+    'exprlists': r'''Expression lists
+****************
+
+   starred_expression:       "*" or_expr | expression
+   flexible_expression:      assignment_expression | starred_expression
+   flexible_expression_list: flexible_expression ("," flexible_expression)* [","]
+   starred_expression_list:  starred_expression ("," starred_expression)* [","]
+   expression_list:          expression ("," expression)* [","]
+   yield_list:               expression_list | starred_expression "," [starred_expression_list]
+
+Except when part of a list or set display, an expression list
+containing at least one comma yields a tuple.  The length of the tuple
+is the number of expressions in the list.  The expressions are
+evaluated from left to right.
+
+An asterisk "*" denotes *iterable unpacking*.  Its operand must be an
+*iterable*.  The iterable is expanded into a sequence of items, which
+are included in the new tuple, list, or set, at the site of the
+unpacking.
+
+Added in version 3.5: Iterable unpacking in expression lists,
+originally proposed by **PEP 448**.
+
+Added in version 3.11: Any item in an expression list may be starred.
+See **PEP 646**.
+
+A trailing comma is required only to create a one-item tuple, such as
+"1,"; it is optional in all other cases. A single expression without a
+trailing comma doesn’t create a tuple, but rather yields the value of
+that expression. (To create an empty tuple, use an empty pair of
+parentheses: "()".)
+''',
+    'floating': r'''Floating-point literals
+***********************
+
+Floating-point (float) literals, such as "3.14" or "1.5", denote
+approximations of real numbers.
+
+They consist of *integer* and *fraction* parts, each composed of
+decimal digits. The parts are separated by a decimal point, ".":
+
+   2.71828
+   4.0
+
+Unlike in integer literals, leading zeros are allowed. For example,
+"077.010" is legal, and denotes the same number as "77.01".
+
+As in integer literals, single underscores may occur between digits to
+help readability:
+
+   96_485.332_123
+   3.14_15_93
+
+Either of these parts, but not both, can be empty. For example:
+
+   10.  # (equivalent to 10.0)
+   .001  # (equivalent to 0.001)
+
+Optionally, the integer and fraction may be followed by an *exponent*:
+the letter "e" or "E", followed by an optional sign, "+" or "-", and a
+number in the same format as the integer and fraction parts. The "e"
+or "E" represents “times ten raised to the power of”:
+
+   1.0e3  # (represents 1.0×10³, or 1000.0)
+   1.166e-5  # (represents 1.166×10⁻⁵, or 0.00001166)
+   6.02214076e+23  # (represents 6.02214076×10²³, or 602214076000000000000000.)
+
+In floats with only integer and exponent parts, the decimal point may
+be omitted:
+
+   1e3  # (equivalent to 1.e3 and 1.0e3)
+   0e0  # (equivalent to 0.)
+
+Formally, floating-point literals are described by the following
+lexical definitions:
+
+   floatnumber:
+      | digitpart "." [digitpart] [exponent]
+      | "." digitpart [exponent]
+      | digitpart exponent
+   digitpart: digit (["_"] digit)*
+   exponent:  ("e" | "E") ["+" | "-"] digitpart
+
+Changed in version 3.6: Underscores are now allowed for grouping
+purposes in literals.
+''',
+    'for': r'''The "for" statement
+*******************
+
+The "for" statement is used to iterate over the elements of a sequence
+(such as a string, tuple or list) or other iterable object:
+
+   for_stmt: "for" target_list "in" starred_expression_list ":" suite
+             ["else" ":" suite]
+
+The "starred_expression_list" expression is evaluated once; it should
+yield an *iterable* object. An *iterator* is created for that
+iterable. The first item provided by the iterator is then assigned to
+the target list using the standard rules for assignments (see
+Assignment statements), and the suite is executed. This repeats for
+each item provided by the iterator. When the iterator is exhausted,
+the suite in the "else" clause, if present, is executed, and the loop
+terminates.
+
+A "break" statement executed in the first suite terminates the loop
+without executing the "else" clause’s suite.  A "continue" statement
+executed in the first suite skips the rest of the suite and continues
+with the next item, or with the "else" clause if there is no next
+item.
+
+The for-loop makes assignments to the variables in the target list.
+This overwrites all previous assignments to those variables including
+those made in the suite of the for-loop:
+
+   for i in range(10):
+       print(i)
+       i = 5             # this will not affect the for-loop
+                         # because i will be overwritten with the next
+                         # index in the range
+
+Names in the target list are not deleted when the loop is finished,
+but if the sequence is empty, they will not have been assigned to at
+all by the loop.  Hint: the built-in type "range()" represents
+immutable arithmetic sequences of integers. For instance, iterating
+"range(3)" successively yields 0, 1, and then 2.
+
+Changed in version 3.11: Starred elements are now allowed in the
+expression list.
+''',
+    'formatstrings': r'''Format string syntax
+********************
+
+The "str.format()" method and the "Formatter" class share the same
+syntax for format strings (although in the case of "Formatter",
+subclasses can define their own format string syntax).  The syntax is
+related to that of formatted string literals and template string
+literals, but it is less sophisticated and, in particular, does not
+support arbitrary expressions in interpolations.
+
+Format strings contain “replacement fields” surrounded by curly braces
+"{}". Anything that is not contained in braces is considered literal
+text, which is copied unchanged to the output.  If you need to include
+a brace character in the literal text, it can be escaped by doubling:
+"{{" and "}}".
+
+The grammar for a replacement field is as follows:
+
+   replacement_field: "{" [field_name] ["!" conversion] [":" format_spec] "}"
+   field_name:        arg_name ("." attribute_name | "[" element_index "]")*
+   arg_name:          [identifier | digit+]
+   attribute_name:    identifier
+   element_index:     digit+ | index_string
+   index_string:      <any source character except "]"> +
+   conversion:        "r" | "s" | "a"
+   format_spec:       format-spec:format_spec
+
+In less formal terms, the replacement field can start with a
+*field_name* that specifies the object whose value is to be formatted
+and inserted into the output instead of the replacement field. The
+*field_name* is optionally followed by a  *conversion* field, which is
+preceded by an exclamation point "'!'", and a *format_spec*, which is
+preceded by a colon "':'".  These specify a non-default format for the
+replacement value.
+
+See also the Format specification mini-language section.
+
+The *field_name* itself begins with an *arg_name* that is either a
+number or a keyword.  If it’s a number, it refers to a positional
+argument, and if it’s a keyword, it refers to a named keyword
+argument. An *arg_name* is treated as a number if a call to
+"str.isdecimal()" on the string would return true. If the numerical
+arg_names in a format string are 0, 1, 2, … in sequence, they can all
+be omitted (not just some) and the numbers 0, 1, 2, … will be
+automatically inserted in that order. Because *arg_name* is not quote-
+delimited, it is not possible to specify arbitrary dictionary keys
+(e.g., the strings "'10'" or "':-]'") within a format string. The
+*arg_name* can be followed by any number of index or attribute
+expressions. An expression of the form "'.name'" selects the named
+attribute using "getattr()", while an expression of the form
+"'[index]'" does an index lookup using "__getitem__()".
+
+Changed in version 3.1: The positional argument specifiers can be
+omitted for "str.format()", so "'{} {}'.format(a, b)" is equivalent to
+"'{0} {1}'.format(a, b)".
+
+Changed in version 3.4: The positional argument specifiers can be
+omitted for "Formatter".
+
+Some simple format string examples:
+
+   "First, thou shalt count to {0}"  # References first positional argument
+   "Bring me a {}"                   # Implicitly references the first positional argument
+   "From {} to {}"                   # Same as "From {0} to {1}"
+   "My quest is {name}"              # References keyword argument 'name'
+   "Weight in tons {0.weight}"       # 'weight' attribute of first positional arg
+   "Units destroyed: {players[0]}"   # First element of keyword argument 'players'.
+
+The *conversion* field causes a type coercion before formatting.
+Normally, the job of formatting a value is done by the "__format__()"
+method of the value itself.  However, in some cases it is desirable to
+force a type to be formatted as a string, overriding its own
+definition of formatting.  By converting the value to a string before
+calling "__format__()", the normal formatting logic is bypassed.
+
+Three conversion flags are currently supported: "'!s'" which calls
+"str()" on the value, "'!r'" which calls "repr()" and "'!a'" which
+calls "ascii()".
+
+Some examples:
+
+   "Harold's a clever {0!s}"        # Calls str() on the argument first
+   "Bring out the holy {name!r}"    # Calls repr() on the argument first
+   "More {!a}"                      # Calls ascii() on the argument first
+
+The *format_spec* field contains a specification of how the value
+should be presented, including such details as field width, alignment,
+padding, decimal precision and so on.  Each value type can define its
+own “formatting mini-language” or interpretation of the *format_spec*.
+
+Most built-in types support a common formatting mini-language, which
+is described in the next section.
+
+A *format_spec* field can also include nested replacement fields
+within it. These nested replacement fields may contain a field name,
+conversion flag and format specification, but deeper nesting is not
+allowed.  The replacement fields within the format_spec are
+substituted before the *format_spec* string is interpreted. This
+allows the formatting of a value to be dynamically specified.
+
+See the Format examples section for some examples.
+
+
+Format specification mini-language
+==================================
+
+“Format specifications” are used within replacement fields contained
+within a format string to define how individual values are presented
+(see Format string syntax, f-strings, and t-strings). They can also be
+passed directly to the built-in "format()" function.  Each formattable
+type may define how the format specification is to be interpreted.
+
+Most built-in types implement the following options for format
+specifications, although some of the formatting options are only
+supported by the numeric types.
+
+A general convention is that an empty format specification produces
+the same result as if you had called "str()" on the value. A non-empty
+format specification typically modifies the result.
+
+The general form of a *standard format specifier* is:
+
+   format_spec:             [options][width_and_precision][type]
+   options:                 [[fill]align][sign]["z"]["#"]["0"]
+   fill:                    <any character>
+   align:                   "<" | ">" | "=" | "^"
+   sign:                    "+" | "-" | " "
+   width_and_precision:     [width_with_grouping][precision_with_grouping]
+   width_with_grouping:     [width][grouping]
+   precision_with_grouping: "." [precision][grouping] | "." grouping
+   width:                   digit+
+   precision:               digit+
+   grouping:                "," | "_"
+   type:                    "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g"
+                            | "G" | "n" | "o" | "s" | "x" | "X" | "%"
+
+If a valid *align* value is specified, it can be preceded by a *fill*
+character that can be any character and defaults to a space if
+omitted. It is not possible to use a literal curly brace (”"{"” or
+“"}"”) as the *fill* character in a formatted string literal or when
+using the "str.format()" method.  However, it is possible to insert a
+curly brace with a nested replacement field.  This limitation doesn’t
+affect the "format()" function.
+
+The meaning of the various alignment options is as follows:
+
++-----------+------------------------------------------------------------+
+| Option    | Meaning                                                    |
+|===========|============================================================|
+| "'<'"     | Forces the field to be left-aligned within the available   |
+|           | space (this is the default for most objects).              |
++-----------+------------------------------------------------------------+
+| "'>'"     | Forces the field to be right-aligned within the available  |
+|           | space (this is the default for numbers).                   |
++-----------+------------------------------------------------------------+
+| "'='"     | Forces the padding to be placed after the sign (if any)    |
+|           | but before the digits.  This is used for printing fields   |
+|           | in the form ‘+000000120’. This alignment option is only    |
+|           | valid for numeric types, excluding "complex". It becomes   |
+|           | the default for numbers when ‘0’ immediately precedes the  |
+|           | field width.                                               |
++-----------+------------------------------------------------------------+
+| "'^'"     | Forces the field to be centered within the available       |
+|           | space.                                                     |
++-----------+------------------------------------------------------------+
+
+Note that unless a minimum field width is defined, the field width
+will always be the same size as the data to fill it, so that the
+alignment option has no meaning in this case.
+
+The *sign* option is only valid for number types, and can be one of
+the following:
+
++-----------+------------------------------------------------------------+
+| Option    | Meaning                                                    |
+|===========|============================================================|
+| "'+'"     | Indicates that a sign should be used for both positive as  |
+|           | well as negative numbers.                                  |
++-----------+------------------------------------------------------------+
+| "'-'"     | Indicates that a sign should be used only for negative     |
+|           | numbers (this is the default behavior).                    |
++-----------+------------------------------------------------------------+
+| space     | Indicates that a leading space should be used on positive  |
+|           | numbers, and a minus sign on negative numbers.             |
++-----------+------------------------------------------------------------+
+
+The "'z'" option coerces negative zero floating-point values to
+positive zero after rounding to the format precision.  This option is
+only valid for floating-point presentation types.
+
+Changed in version 3.11: Added the "'z'" option (see also **PEP
+682**).
+
+The "'#'" option causes the “alternate form” to be used for the
+conversion.  The alternate form is defined differently for different
+types.  This option is only valid for integer, float and complex
+types. For integers, when binary, octal, or hexadecimal output is
+used, this option adds the respective prefix "'0b'", "'0o'", "'0x'",
+or "'0X'" to the output value. For float and complex the alternate
+form causes the result of the conversion to always contain a decimal-
+point character, even if no digits follow it. Normally, a decimal-
+point character appears in the result of these conversions only if a
+digit follows it. In addition, for "'g'" and "'G'" conversions,
+trailing zeros are not removed from the result.
+
+The *width* is a decimal integer defining the minimum total field
+width, including any prefixes, separators, and other formatting
+characters. If not specified, then the field width will be determined
+by the content.
+
+When no explicit alignment is given, preceding the *width* field by a
+zero ("'0'") character enables sign-aware zero-padding for numeric
+types, excluding "complex".  This is equivalent to a *fill* character
+of "'0'" with an *alignment* type of "'='".
+
+Changed in version 3.10: Preceding the *width* field by "'0'" no
+longer affects the default alignment for strings.
+
+The *precision* is a decimal integer indicating how many digits should
+be displayed after the decimal point for presentation types "'f'" and
+"'F'", or before and after the decimal point for presentation types
+"'g'" or "'G'".  For string presentation types the field indicates the
+maximum field size - in other words, how many characters will be used
+from the field content.  The *precision* is not allowed for integer
+presentation types.
+
+The *grouping* option after *width* and *precision* fields specifies a
+digit group separator for the integral and fractional parts of a
+number respectively. It can be one of the following:
+
++-----------+------------------------------------------------------------+
+| Option    | Meaning                                                    |
+|===========|============================================================|
+| "','"     | Inserts a comma every 3 digits for integer presentation    |
+|           | type "'d'" and floating-point presentation types,          |
+|           | excluding "'n'". For other presentation types, this option |
+|           | is not supported.                                          |
++-----------+------------------------------------------------------------+
+| "'_'"     | Inserts an underscore every 3 digits for integer           |
+|           | presentation type "'d'" and floating-point presentation    |
+|           | types, excluding "'n'". For integer presentation types     |
+|           | "'b'", "'o'", "'x'", and "'X'", underscores are inserted   |
+|           | every 4 digits. For other presentation types, this option  |
+|           | is not supported.                                          |
++-----------+------------------------------------------------------------+
+
+For a locale aware separator, use the "'n'" presentation type instead.
+
+Changed in version 3.1: Added the "','" option (see also **PEP 378**).
+
+Changed in version 3.6: Added the "'_'" option (see also **PEP 515**).
+
+Changed in version 3.14: Support the *grouping* option for the
+fractional part.
+
+Finally, the *type* determines how the data should be presented.
+
+The available string presentation types are:
+
+   +-----------+------------------------------------------------------------+
+   | Type      | Meaning                                                    |
+   |===========|============================================================|
+   | "'s'"     | String format. This is the default type for strings and    |
+   |           | may be omitted.                                            |
+   +-----------+------------------------------------------------------------+
+   | None      | The same as "'s'".                                         |
+   +-----------+------------------------------------------------------------+
+
+The available integer presentation types are:
+
+   +-----------+------------------------------------------------------------+
+   | Type      | Meaning                                                    |
+   |===========|============================================================|
+   | "'b'"     | Binary format. Outputs the number in base 2.               |
+   +-----------+------------------------------------------------------------+
+   | "'c'"     | Character. Converts the integer to the corresponding       |
+   |           | unicode character before printing.                         |
+   +-----------+------------------------------------------------------------+
+   | "'d'"     | Decimal Integer. Outputs the number in base 10.            |
+   +-----------+------------------------------------------------------------+
+   | "'o'"     | Octal format. Outputs the number in base 8.                |
+   +-----------+------------------------------------------------------------+
+   | "'x'"     | Hex format. Outputs the number in base 16, using lower-    |
+   |           | case letters for the digits above 9.                       |
+   +-----------+------------------------------------------------------------+
+   | "'X'"     | Hex format. Outputs the number in base 16, using upper-    |
+   |           | case letters for the digits above 9. In case "'#'" is      |
+   |           | specified, the prefix "'0x'" will be upper-cased to "'0X'" |
+   |           | as well.                                                   |
+   +-----------+------------------------------------------------------------+
+   | "'n'"     | Number. This is the same as "'d'", except that it uses the |
+   |           | current locale setting to insert the appropriate digit     |
+   |           | group separators.                                          |
+   +-----------+------------------------------------------------------------+
+   | None      | The same as "'d'".                                         |
+   +-----------+------------------------------------------------------------+
+
+In addition to the above presentation types, integers can be formatted
+with the floating-point presentation types listed below (except "'n'"
+and "None"). When doing so, "float()" is used to convert the integer
+to a floating-point number before formatting.
+
+The available presentation types for "float" and "Decimal" values are:
+
+   +-----------+------------------------------------------------------------+
+   | Type      | Meaning                                                    |
+   |===========|============================================================|
+   | "'e'"     | Scientific notation. For a given precision "p", formats    |
+   |           | the number in scientific notation with the letter ‘e’      |
+   |           | separating the coefficient from the exponent. The          |
+   |           | coefficient has one digit before and "p" digits after the  |
+   |           | decimal point, for a total of "p + 1" significant digits.  |
+   |           | With no precision given, uses a precision of "6" digits    |
+   |           | after the decimal point for "float", and shows all         |
+   |           | coefficient digits for "Decimal".  If "p=0", the decimal   |
+   |           | point is omitted unless the "#" option is used.  For       |
+   |           | "float", the exponent always contains at least two digits, |
+   |           | and is zero if the value is zero.                          |
+   +-----------+------------------------------------------------------------+
+   | "'E'"     | Scientific notation. Same as "'e'" except it uses an upper |
+   |           | case ‘E’ as the separator character.                       |
+   +-----------+------------------------------------------------------------+
+   | "'f'"     | Fixed-point notation. For a given precision "p", formats   |
+   |           | the number as a decimal number with exactly "p" digits     |
+   |           | following the decimal point. With no precision given, uses |
+   |           | a precision of "6" digits after the decimal point for      |
+   |           | "float", and uses a precision large enough to show all     |
+   |           | coefficient digits for "Decimal".  If "p=0", the decimal   |
+   |           | point is omitted unless the "#" option is used.            |
+   +-----------+------------------------------------------------------------+
+   | "'F'"     | Fixed-point notation. Same as "'f'", but converts "nan" to |
+   |           | "NAN" and "inf" to "INF".                                  |
+   +-----------+------------------------------------------------------------+
+   | "'g'"     | General format.  For a given precision "p >= 1", this      |
+   |           | rounds the number to "p" significant digits and then       |
+   |           | formats the result in either fixed-point format or in      |
+   |           | scientific notation, depending on its magnitude. A         |
+   |           | precision of "0" is treated as equivalent to a precision   |
+   |           | of "1".  The precise rules are as follows: suppose that    |
+   |           | the result formatted with presentation type "'e'" and      |
+   |           | precision "p-1" would have exponent "exp".  Then, if "m <= |
+   |           | exp < p", where "m" is -4 for floats and -6 for            |
+   |           | "Decimals", the number is formatted with presentation type |
+   |           | "'f'" and precision "p-1-exp".  Otherwise, the number is   |
+   |           | formatted with presentation type "'e'" and precision       |
+   |           | "p-1". In both cases insignificant trailing zeros are      |
+   |           | removed from the significand, and the decimal point is     |
+   |           | also removed if there are no remaining digits following    |
+   |           | it, unless the "'#'" option is used.  With no precision    |
+   |           | given, uses a precision of "6" significant digits for      |
+   |           | "float". For "Decimal", the coefficient of the result is   |
+   |           | formed from the coefficient digits of the value;           |
+   |           | scientific notation is used for values smaller than "1e-6" |
+   |           | in absolute value and values where the place value of the  |
+   |           | least significant digit is larger than 1, and fixed-point  |
+   |           | notation is used otherwise.  Positive and negative         |
+   |           | infinity, positive and negative zero, and nans, are        |
+   |           | formatted as "inf", "-inf", "0", "-0" and "nan"            |
+   |           | respectively, regardless of the precision.                 |
+   +-----------+------------------------------------------------------------+
+   | "'G'"     | General format. Same as "'g'" except switches to "'E'" if  |
+   |           | the number gets too large. The representations of infinity |
+   |           | and NaN are uppercased, too.                               |
+   +-----------+------------------------------------------------------------+
+   | "'n'"     | Number. This is the same as "'g'", except that it uses the |
+   |           | current locale setting to insert the appropriate digit     |
+   |           | group separators for the integral part of a number.        |
+   +-----------+------------------------------------------------------------+
+   | "'%'"     | Percentage. Multiplies the number by 100 and displays in   |
+   |           | fixed ("'f'") format, followed by a percent sign.          |
+   +-----------+------------------------------------------------------------+
+   | None      | For "float" this is like the "'g'" type, except that when  |
+   |           | fixed- point notation is used to format the result, it     |
+   |           | always includes at least one digit past the decimal point, |
+   |           | and switches to the scientific notation when "exp >= p -   |
+   |           | 1".  When the precision is not specified, the latter will  |
+   |           | be as large as needed to represent the given value         |
+   |           | faithfully.  For "Decimal", this is the same as either     |
+   |           | "'g'" or "'G'" depending on the value of                   |
+   |           | "context.capitals" for the current decimal context.  The   |
+   |           | overall effect is to match the output of "str()" as        |
+   |           | altered by the other format modifiers.                     |
+   +-----------+------------------------------------------------------------+
+
+The result should be correctly rounded to a given precision "p" of
+digits after the decimal point.  The rounding mode for "float" matches
+that of the "round()" builtin.  For "Decimal", the rounding mode of
+the current context will be used.
+
+The available presentation types for "complex" are the same as those
+for "float" ("'%'" is not allowed).  Both the real and imaginary
+components of a complex number are formatted as floating-point
+numbers, according to the specified presentation type.  They are
+separated by the mandatory sign of the imaginary part, the latter
+being terminated by a "j" suffix.  If the presentation type is
+missing, the result will match the output of "str()" (complex numbers
+with a non-zero real part are also surrounded by parentheses),
+possibly altered by other format modifiers.
+
+
+Format examples
+===============
+
+This section contains examples of the "str.format()" syntax and
+comparison with the old "%"-formatting.
+
+In most of the cases the syntax is similar to the old "%"-formatting,
+with the addition of the "{}" and with ":" used instead of "%". For
+example, "'%03.2f'" can be translated to "'{:03.2f}'".
+
+The new format syntax also supports new and different options, shown
+in the following examples.
+
+Accessing arguments by position:
+
+   >>> '{0}, {1}, {2}'.format('a', 'b', 'c')
+   'a, b, c'
+   >>> '{}, {}, {}'.format('a', 'b', 'c')  # 3.1+ only
+   'a, b, c'
+   >>> '{2}, {1}, {0}'.format('a', 'b', 'c')
+   'c, b, a'
+   >>> '{2}, {1}, {0}'.format(*'abc')      # unpacking argument sequence
+   'c, b, a'
+   >>> '{0}{1}{0}'.format('abra', 'cad')   # arguments' indices can be repeated
+   'abracadabra'
+
+Accessing arguments by name:
+
+   >>> 'Coordinates: {latitude}, {longitude}'.format(latitude='37.24N', longitude='-115.81W')
+   'Coordinates: 37.24N, -115.81W'
+   >>> coord = {'latitude': '37.24N', 'longitude': '-115.81W'}
+   >>> 'Coordinates: {latitude}, {longitude}'.format(**coord)
+   'Coordinates: 37.24N, -115.81W'
+
+Accessing arguments’ attributes:
+
+   >>> c = 3-5j
+   >>> ('The complex number {0} is formed from the real part {0.real} '
+   ...  'and the imaginary part {0.imag}.').format(c)
+   'The complex number (3-5j) is formed from the real part 3.0 and the imaginary part -5.0.'
+   >>> class Point:
+   ...     def __init__(self, x, y):
+   ...         self.x, self.y = x, y
+   ...     def __str__(self):
+   ...         return 'Point({self.x}, {self.y})'.format(self=self)
+   ...
+   >>> str(Point(4, 2))
+   'Point(4, 2)'
+
+Accessing arguments’ items:
+
+   >>> coord = (3, 5)
+   >>> 'X: {0[0]};  Y: {0[1]}'.format(coord)
+   'X: 3;  Y: 5'
+
+Replacing "%s" and "%r":
+
+   >>> "repr() shows quotes: {!r}; str() doesn't: {!s}".format('test1', 'test2')
+   "repr() shows quotes: 'test1'; str() doesn't: test2"
+
+Aligning the text and specifying a width:
+
+   >>> '{:<30}'.format('left aligned')
+   'left aligned                  '
+   >>> '{:>30}'.format('right aligned')
+   '                 right aligned'
+   >>> '{:^30}'.format('centered')
+   '           centered           '
+   >>> '{:*^30}'.format('centered')  # use '*' as a fill char
+   '***********centered***********'
+
+Replacing "%+f", "%-f", and "% f" and specifying a sign:
+
+   >>> '{:+f}; {:+f}'.format(3.14, -3.14)  # show it always
+   '+3.140000; -3.140000'
+   >>> '{: f}; {: f}'.format(3.14, -3.14)  # show a space for positive numbers
+   ' 3.140000; -3.140000'
+   >>> '{:-f}; {:-f}'.format(3.14, -3.14)  # show only the minus -- same as '{:f}; {:f}'
+   '3.140000; -3.140000'
+
+Replacing "%x" and "%o" and converting the value to different bases:
+
+   >>> # format also supports binary numbers
+   >>> "int: {0:d};  hex: {0:x};  oct: {0:o};  bin: {0:b}".format(42)
+   'int: 42;  hex: 2a;  oct: 52;  bin: 101010'
+   >>> # with 0x, 0o, or 0b as prefix:
+   >>> "int: {0:d};  hex: {0:#x};  oct: {0:#o};  bin: {0:#b}".format(42)
+   'int: 42;  hex: 0x2a;  oct: 0o52;  bin: 0b101010'
+
+Using the comma or the underscore as a digit group separator:
+
+   >>> '{:,}'.format(1234567890)
+   '1,234,567,890'
+   >>> '{:_}'.format(1234567890)
+   '1_234_567_890'
+   >>> '{:_b}'.format(1234567890)
+   '100_1001_1001_0110_0000_0010_1101_0010'
+   >>> '{:_x}'.format(1234567890)
+   '4996_02d2'
+   >>> '{:_}'.format(123456789.123456789)
+   '123_456_789.12345679'
+   >>> '{:.,}'.format(123456789.123456789)
+   '123456789.123,456,79'
+   >>> '{:,._}'.format(123456789.123456789)
+   '123,456,789.123_456_79'
+
+Expressing a percentage:
+
+   >>> points = 19
+   >>> total = 22
+   >>> 'Correct answers: {:.2%}'.format(points/total)
+   'Correct answers: 86.36%'
+
+Using type-specific formatting:
+
+   >>> import datetime as dt
+   >>> d = dt.datetime(2010, 7, 4, 12, 15, 58)
+   >>> '{:%Y-%m-%d %H:%M:%S}'.format(d)
+   '2010-07-04 12:15:58'
+
+Nesting arguments and more complex examples:
+
+   >>> for align, text in zip('<^>', ['left', 'center', 'right']):
+   ...     '{0:{fill}{align}16}'.format(text, fill=align, align=align)
+   ...
+   'left<<<<<<<<<<<<'
+   '^^^^^center^^^^^'
+   '>>>>>>>>>>>right'
+   >>>
+   >>> octets = [192, 168, 0, 1]
+   >>> '{:02X}{:02X}{:02X}{:02X}'.format(*octets)
+   'C0A80001'
+   >>> int(_, 16)
+   3232235521
+   >>>
+   >>> width = 5
+   >>> for num in range(5,12):
+   ...     for base in 'dXob':
+   ...         print('{0:{width}{base}}'.format(num, base=base, width=width), end=' ')
+   ...     print()
+   ...
+       5     5     5   101
+       6     6     6   110
+       7     7     7   111
+       8     8    10  1000
+       9     9    11  1001
+      10     A    12  1010
+      11     B    13  1011
+''',
+    'function': r'''Function definitions
+********************
+
+A function definition defines a user-defined function object (see
+section The standard type hierarchy):
+
+   funcdef:                   [decorators] "def" funcname [type_params] "(" [parameter_list] ")"
+                              ["->" expression] ":" suite
+   decorators:                decorator+
+   decorator:                 "@" assignment_expression NEWLINE
+   parameter_list:            defparameter ("," defparameter)* "," "/" ["," [parameter_list_no_posonly]]
+                                | parameter_list_no_posonly
+   parameter_list_no_posonly: defparameter ("," defparameter)* ["," [parameter_list_starargs]]
+                              | parameter_list_starargs
+   parameter_list_starargs:   "*" [star_parameter] ("," defparameter)* ["," [parameter_star_kwargs]]
+                              | "*" ("," defparameter)+ ["," [parameter_star_kwargs]]
+                              | parameter_star_kwargs
+   parameter_star_kwargs:     "**" parameter [","]
+   parameter:                 identifier [":" expression]
+   star_parameter:            identifier [":" ["*"] expression]
+   defparameter:              parameter ["=" expression]
+   funcname:                  identifier
+
+A function definition is an executable statement.  Its execution binds
+the function name in the current local namespace to a function object
+(a wrapper around the executable code for the function).  This
+function object contains a reference to the current global namespace
+as the global namespace to be used when the function is called.
+
+The function definition does not execute the function body; this gets
+executed only when the function is called. [4]
+
+A function definition may be wrapped by one or more *decorator*
+expressions. Decorator expressions are evaluated when the function is
+defined, in the scope that contains the function definition.  The
+result must be a callable, which is invoked with the function object
+as the only argument. The returned value is bound to the function name
+instead of the function object.  Multiple decorators are applied in
+nested fashion. For example, the following code
+
+   @f1(arg)
+   @f2
+   def func(): pass
+
+is roughly equivalent to
+
+   def func(): pass
+   func = f1(arg)(f2(func))
+
+except that the original function is not temporarily bound to the name
+"func".
+
+Changed in version 3.9: Functions may be decorated with any valid
+"assignment_expression". Previously, the grammar was much more
+restrictive; see **PEP 614** for details.
+
+A list of type parameters may be given in square brackets between the
+function’s name and the opening parenthesis for its parameter list.
+This indicates to static type checkers that the function is generic.
+At runtime, the type parameters can be retrieved from the function’s
+"__type_params__" attribute. See Generic functions for more.
+
+Changed in version 3.12: Type parameter lists are new in Python 3.12.
+
+When one or more *parameters* have the form *parameter* "="
+*expression*, the function is said to have “default parameter values.”
+For a parameter with a default value, the corresponding *argument* may
+be omitted from a call, in which case the parameter’s default value is
+substituted.  If a parameter has a default value, all following
+parameters up until the “"*"” must also have a default value — this is
+a syntactic restriction that is not expressed by the grammar.
+
+**Default parameter values are evaluated from left to right when the
+function definition is executed.** This means that the expression is
+evaluated once, when the function is defined, and that the same “pre-
+computed” value is used for each call.  This is especially important
+to understand when a default parameter value is a mutable object, such
+as a list or a dictionary: if the function modifies the object (e.g.
+by appending an item to a list), the default parameter value is in
+effect modified.  This is generally not what was intended.  A way
+around this is to use "None" as the default, and explicitly test for
+it in the body of the function, e.g.:
+
+   def whats_on_the_telly(penguin=None):
+       if penguin is None:
+           penguin = []
+       penguin.append("property of the zoo")
+       return penguin
+
+Function call semantics are described in more detail in section Calls.
+A function call always assigns values to all parameters mentioned in
+the parameter list, either from positional arguments, from keyword
+arguments, or from default values.  If the form “"*identifier"” is
+present, it is initialized to a tuple receiving any excess positional
+parameters, defaulting to the empty tuple. If the form
+“"**identifier"” is present, it is initialized to a new ordered
+mapping receiving any excess keyword arguments, defaulting to a new
+empty mapping of the same type.  Parameters after “"*"” or
+“"*identifier"” are keyword-only parameters and may only be passed by
+keyword arguments.  Parameters before “"/"” are positional-only
+parameters and may only be passed by positional arguments.
+
+Changed in version 3.8: The "/" function parameter syntax may be used
+to indicate positional-only parameters. See **PEP 570** for details.
+
+Parameters may have an *annotation* of the form “": expression"”
+following the parameter name.  Any parameter may have an annotation,
+even those of the form "*identifier" or "**identifier". (As a special
+case, parameters of the form "*identifier" may have an annotation “":
+*expression"”.) Functions may have “return” annotation of the form
+“"-> expression"” after the parameter list.  These annotations can be
+any valid Python expression.  The presence of annotations does not
+change the semantics of a function. See Annotations for more
+information on annotations.
+
+Changed in version 3.11: Parameters of the form “"*identifier"” may
+have an annotation “": *expression"”. See **PEP 646**.
+
+It is also possible to create anonymous functions (functions not bound
+to a name), for immediate use in expressions.  This uses lambda
+expressions, described in section Lambdas.  Note that the lambda
+expression is merely a shorthand for a simplified function definition;
+a function defined in a “"def"” statement can be passed around or
+assigned to another name just like a function defined by a lambda
+expression.  The “"def"” form is actually more powerful since it
+allows the execution of multiple statements and annotations.
+
+**Programmer’s note:** Functions are first-class objects.  A “"def"”
+statement executed inside a function definition defines a local
+function that can be returned or passed around.  Free variables used
+in the nested function can access the local variables of the function
+containing the def.  See section Naming and binding for details.
+
+See also:
+
+  **PEP 3107** - Function Annotations
+     The original specification for function annotations.
+
+  **PEP 484** - Type Hints
+     Definition of a standard meaning for annotations: type hints.
+
+  **PEP 526** - Syntax for Variable Annotations
+     Ability to type hint variable declarations, including class
+     variables and instance variables.
+
+  **PEP 563** - Postponed Evaluation of Annotations
+     Support for forward references within annotations by preserving
+     annotations in a string form at runtime instead of eager
+     evaluation.
+
+  **PEP 318** - Decorators for Functions and Methods
+     Function and method decorators were introduced. Class decorators
+     were introduced in **PEP 3129**.
+''',
+    'global': r'''The "global" statement
+**********************
+
+   global_stmt: "global" identifier ("," identifier)*
+
+The "global" statement causes the listed identifiers to be interpreted
+as globals. It would be impossible to assign to a global variable
+without "global", although free variables may refer to globals without
+being declared global.
+
+The "global" statement applies to the entire current scope (module,
+function body or class definition). A "SyntaxError" is raised if a
+variable is used or assigned to prior to its global declaration in the
+scope.
+
+At the module level, all variables are global, so a "global" statement
+has no effect. However, variables must still not be used or assigned
+to prior to their "global" declaration. This requirement is relaxed in
+the interactive prompt (*REPL*).
+
+**Programmer’s note:** "global" is a directive to the parser.  It
+applies only to code parsed at the same time as the "global"
+statement. In particular, a "global" statement contained in a string
+or code object supplied to the built-in "exec()" function does not
+affect the code block *containing* the function call, and code
+contained in such a string is unaffected by "global" statements in the
+code containing the function call.  The same applies to the "eval()"
+and "compile()" functions.
+''',
+    'id-classes': r'''Reserved classes of identifiers
+*******************************
+
+Certain classes of identifiers (besides keywords) have special
+meanings.  These classes are identified by the patterns of leading and
+trailing underscore characters:
+
+"_*"
+   Not imported by "from module import *".
+
+"_"
+   In a "case" pattern within a "match" statement, "_" is a soft
+   keyword that denotes a wildcard.
+
+   Separately, the interactive interpreter makes the result of the
+   last evaluation available in the variable "_". (It is stored in the
+   "builtins" module, alongside built-in functions like "print".)
+
+   Elsewhere, "_" is a regular identifier. It is often used to name
+   “special” items, but it is not special to Python itself.
+
+   Note:
+
+     The name "_" is often used in conjunction with
+     internationalization; refer to the documentation for the
+     "gettext" module for more information on this convention.It is
+     also commonly used for unused variables.
+
+"__*__"
+   System-defined names, informally known as “dunder” names. These
+   names are defined by the interpreter and its implementation
+   (including the standard library). Current system names are
+   discussed in the Special method names section and elsewhere. More
+   will likely be defined in future versions of Python.  *Any* use of
+   "__*__" names, in any context, that does not follow explicitly
+   documented use, is subject to breakage without warning.
+
+"__*"
+   Class-private names.  Names in this category, when used within the
+   context of a class definition, are re-written to use a mangled form
+   to help avoid name clashes between “private” attributes of base and
+   derived classes. See section Identifiers (Names).
+''',
+    'identifiers': r'''Names (identifiers and keywords)
+********************************
+
+"NAME" tokens represent *identifiers*, *keywords*, and *soft
+keywords*.
+
+Names are composed of the following characters:
+
+* uppercase and lowercase letters ("A-Z" and "a-z"),
+
+* the underscore ("_"),
+
+* digits ("0" through "9"), which cannot appear as the first
+  character, and
+
+* non-ASCII characters. Valid names may only contain “letter-like” and
+  “digit-like” characters; see Non-ASCII characters in names for
+  details.
+
+Names must contain at least one character, but have no upper length
+limit. Case is significant.
+
+Formally, names are described by the following lexical definitions:
+
+   NAME:          name_start name_continue*
+   name_start:    "a"..."z" | "A"..."Z" | "_" | <non-ASCII character>
+   name_continue: name_start | "0"..."9"
+   identifier:    <NAME, except keywords>
+
+Note that not all names matched by this grammar are valid; see Non-
+ASCII characters in names for details.
+
+
+Keywords
+========
+
+The following names are used as reserved words, or *keywords* of the
+language, and cannot be used as ordinary identifiers.  They must be
+spelled exactly as written here:
+
+   False      await      else       import     pass
+   None       break      except     in         raise
+   True       class      finally    is         return
+   and        continue   for        lambda     try
+   as         def        from       nonlocal   while
+   assert     del        global     not        with
+   async      elif       if         or         yield
+
+
+Soft Keywords
+=============
+
+Added in version 3.10.
+
+Some names are only reserved under specific contexts. These are known
+as *soft keywords*:
+
+* "match", "case", and "_", when used in the "match" statement.
+
+* "type", when used in the "type" statement.
+
+These syntactically act as keywords in their specific contexts, but
+this distinction is done at the parser level, not when tokenizing.
+
+As soft keywords, their use in the grammar is possible while still
+preserving compatibility with existing code that uses these names as
+identifier names.
+
+Changed in version 3.12: "type" is now a soft keyword.
+
+
+Reserved classes of identifiers
+===============================
+
+Certain classes of identifiers (besides keywords) have special
+meanings.  These classes are identified by the patterns of leading and
+trailing underscore characters:
+
+"_*"
+   Not imported by "from module import *".
+
+"_"
+   In a "case" pattern within a "match" statement, "_" is a soft
+   keyword that denotes a wildcard.
+
+   Separately, the interactive interpreter makes the result of the
+   last evaluation available in the variable "_". (It is stored in the
+   "builtins" module, alongside built-in functions like "print".)
+
+   Elsewhere, "_" is a regular identifier. It is often used to name
+   “special” items, but it is not special to Python itself.
+
+   Note:
+
+     The name "_" is often used in conjunction with
+     internationalization; refer to the documentation for the
+     "gettext" module for more information on this convention.It is
+     also commonly used for unused variables.
+
+"__*__"
+   System-defined names, informally known as “dunder” names. These
+   names are defined by the interpreter and its implementation
+   (including the standard library). Current system names are
+   discussed in the Special method names section and elsewhere. More
+   will likely be defined in future versions of Python.  *Any* use of
+   "__*__" names, in any context, that does not follow explicitly
+   documented use, is subject to breakage without warning.
+
+"__*"
+   Class-private names.  Names in this category, when used within the
+   context of a class definition, are re-written to use a mangled form
+   to help avoid name clashes between “private” attributes of base and
+   derived classes. See section Identifiers (Names).
+
+
+Non-ASCII characters in names
+=============================
+
+Names that contain non-ASCII characters need additional normalization
+and validation beyond the rules and grammar explained above. For
+example, "ř_1", "蛇", or "साँप"  are valid names, but "r〰2", "€", or
+"🐍" are not.
+
+This section explains the exact rules.
+
+All names are converted into the normalization form NFKC while
+parsing. This means that, for example, some typographic variants of
+characters are converted to their “basic” form. For example,
+"fiⁿₐˡᵢᶻₐᵗᵢᵒₙ" normalizes to "finalization", so Python treats them as
+the same name:
+
+   >>> fiⁿₐˡᵢᶻₐᵗᵢᵒₙ = 3
+   >>> finalization
+   3
+
+Note:
+
+  Normalization is done at the lexical level only. Run-time functions
+  that take names as *strings* generally do not normalize their
+  arguments. For example, the variable defined above is accessible at
+  run time in the "globals()" dictionary as
+  "globals()["finalization"]" but not "globals()["fiⁿₐˡᵢᶻₐᵗᵢᵒₙ"]".
+
+Similarly to how ASCII-only names must contain only letters, digits
+and the underscore, and cannot start with a digit, a valid name must
+start with a character in the “letter-like” set "xid_start", and the
+remaining characters must be in the “letter- and digit-like” set
+"xid_continue".
+
+These sets are based on the *XID_Start* and *XID_Continue* sets as
+defined by the Unicode standard annex UAX-31. Python’s "xid_start"
+additionally includes the underscore ("_"). Note that Python does not
+necessarily conform to UAX-31.
+
+A non-normative listing of characters in the *XID_Start* and
+*XID_Continue* sets as defined by Unicode is available in the
+DerivedCoreProperties.txt file in the Unicode Character Database. For
+reference, the construction rules for the "xid_*" sets are given
+below.
+
+The set "id_start" is defined as the union of:
+
+* Unicode category "<Lu>" - uppercase letters (includes "A" to "Z")
+
+* Unicode category "<Ll>" - lowercase letters (includes "a" to "z")
+
+* Unicode category "<Lt>" - titlecase letters
+
+* Unicode category "<Lm>" - modifier letters
+
+* Unicode category "<Lo>" - other letters
+
+* Unicode category "<Nl>" - letter numbers
+
+* {""_""} - the underscore
+
+* "<Other_ID_Start>" - an explicit set of characters in PropList.txt
+  to support backwards compatibility
+
+The set "xid_start" then closes this set under NFKC normalization, by
+removing all characters whose normalization is not of the form
+"id_start id_continue*".
+
+The set "id_continue" is defined as the union of:
+
+* "id_start" (see above)
+
+* Unicode category "<Nd>" - decimal numbers (includes "0" to "9")
+
+* Unicode category "<Pc>" - connector punctuations
+
+* Unicode category "<Mn>" - nonspacing marks
+
+* Unicode category "<Mc>" - spacing combining marks
+
+* "<Other_ID_Continue>" - another explicit set of characters in
+  PropList.txt to support backwards compatibility
+
+Again, "xid_continue" closes this set under NFKC normalization.
+
+Unicode categories use the version of the Unicode Character Database
+as included in the "unicodedata" module.
+
+See also:
+
+  * **PEP 3131** – Supporting Non-ASCII Identifiers
+
+  * **PEP 672** – Unicode-related Security Considerations for Python
+''',
+    'if': r'''The "if" statement
+******************
+
+The "if" statement is used for conditional execution:
+
+   if_stmt: "if" assignment_expression ":" suite
+            ("elif" assignment_expression ":" suite)*
+            ["else" ":" suite]
+
+It selects exactly one of the suites by evaluating the expressions one
+by one until one is found to be true (see section Boolean operations
+for the definition of true and false); then that suite is executed
+(and no other part of the "if" statement is executed or evaluated).
+If all expressions are false, the suite of the "else" clause, if
+present, is executed.
+''',
+    'imaginary': r'''Imaginary literals
+******************
+
+Python has complex number objects, but no complex literals. Instead,
+*imaginary literals* denote complex numbers with a zero real part.
+
+For example, in math, the complex number 3+4.2*i* is written as the
+real number 3 added to the imaginary number 4.2*i*. Python uses a
+similar syntax, except the imaginary unit is written as "j" rather
+than *i*:
+
+   3+4.2j
+
+This is an expression composed of the integer literal "3", the
+operator ‘"+"’, and the imaginary literal "4.2j". Since these are
+three separate tokens, whitespace is allowed between them:
+
+   3 + 4.2j
+
+No whitespace is allowed *within* each token. In particular, the "j"
+suffix, may not be separated from the number before it.
+
+The number before the "j" has the same syntax as a floating-point
+literal. Thus, the following are valid imaginary literals:
+
+   4.2j
+   3.14j
+   10.j
+   .001j
+   1e100j
+   3.14e-10j
+   3.14_15_93j
+
+Unlike in a floating-point literal the decimal point can be omitted if
+the imaginary number only has an integer part. The number is still
+evaluated as a floating-point number, not an integer:
+
+   10j
+   0j
+   1000000000000000000000000j   # equivalent to 1e+24j
+
+The "j" suffix is case-insensitive. That means you can use "J"
+instead:
+
+   3.14J   # equivalent to 3.14j
+
+Formally, imaginary literals are described by the following lexical
+definition:
+
+   imagnumber: (floatnumber | digitpart) ("j" | "J")
+''',
+    'import': r'''The "import" statement
+**********************
+
+   import_stmt:     "import" module ["as" identifier] ("," module ["as" identifier])*
+                    | "from" relative_module "import" identifier ["as" identifier]
+                    ("," identifier ["as" identifier])*
+                    | "from" relative_module "import" "(" identifier ["as" identifier]
+                    ("," identifier ["as" identifier])* [","] ")"
+                    | "from" relative_module "import" "*"
+   module:          (identifier ".")* identifier
+   relative_module: "."* module | "."+
+
+The basic import statement (no "from" clause) is executed in two
+steps:
+
+1. find a module, loading and initializing it if necessary
+
+2. define a name or names in the local namespace for the scope where
+   the "import" statement occurs.
+
+When the statement contains multiple clauses (separated by commas) the
+two steps are carried out separately for each clause, just as though
+the clauses had been separated out into individual import statements.
+
+The details of the first step, finding and loading modules, are
+described in greater detail in the section on the import system, which
+also describes the various types of packages and modules that can be
+imported, as well as all the hooks that can be used to customize the
+import system. Note that failures in this step may indicate either
+that the module could not be located, *or* that an error occurred
+while initializing the module, which includes execution of the
+module’s code.
+
+If the requested module is retrieved successfully, it will be made
+available in the local namespace in one of three ways:
+
+* If the module name is followed by "as", then the name following "as"
+  is bound directly to the imported module.
+
+* If no other name is specified, and the module being imported is a
+  top level module, the module’s name is bound in the local namespace
+  as a reference to the imported module
+
+* If the module being imported is *not* a top level module, then the
+  name of the top level package that contains the module is bound in
+  the local namespace as a reference to the top level package. The
+  imported module must be accessed using its full qualified name
+  rather than directly
+
+The "from" form uses a slightly more complex process:
+
+1. find the module specified in the "from" clause, loading and
+   initializing it if necessary;
+
+2. for each of the identifiers specified in the "import" clauses:
+
+   1. check if the imported module has an attribute by that name
+
+   2. if not, attempt to import a submodule with that name and then
+      check the imported module again for that attribute
+
+   3. if the attribute is not found, "ImportError" is raised.
+
+   4. otherwise, a reference to that value is stored in the local
+      namespace, using the name in the "as" clause if it is present,
+      otherwise using the attribute name
+
+Examples:
+
+   import foo                 # foo imported and bound locally
+   import foo.bar.baz         # foo, foo.bar, and foo.bar.baz imported, foo bound locally
+   import foo.bar.baz as fbb  # foo, foo.bar, and foo.bar.baz imported, foo.bar.baz bound as fbb
+   from foo.bar import baz    # foo, foo.bar, and foo.bar.baz imported, foo.bar.baz bound as baz
+   from foo import attr       # foo imported and foo.attr bound as attr
+
+If the list of identifiers is replaced by a star ("'*'"), all public
+names defined in the module are bound in the local namespace for the
+scope where the "import" statement occurs.
+
+The *public names* defined by a module are determined by checking the
+module’s namespace for a variable named "__all__"; if defined, it must
+be a sequence of strings which are names defined or imported by that
+module. Names containing non-ASCII characters must be in the
+normalization form NFKC; see Non-ASCII characters in names for
+details.  The names given in "__all__" are all considered public and
+are required to exist.  If "__all__" is not defined, the set of public
+names includes all names found in the module’s namespace which do not
+begin with an underscore character ("'_'").  "__all__" should contain
+the entire public API. It is intended to avoid accidentally exporting
+items that are not part of the API (such as library modules which were
+imported and used within the module).
+
+The wild card form of import — "from module import *" — is only
+allowed at the module level.  Attempting to use it in class or
+function definitions will raise a "SyntaxError".
+
+When specifying what module to import you do not have to specify the
+absolute name of the module. When a module or package is contained
+within another package it is possible to make a relative import within
+the same top package without having to mention the package name. By
+using leading dots in the specified module or package after "from" you
+can specify how high to traverse up the current package hierarchy
+without specifying exact names. One leading dot means the current
+package where the module making the import exists. Two dots means up
+one package level. Three dots is up two levels, etc. So if you execute
+"from . import mod" from a module in the "pkg" package then you will
+end up importing "pkg.mod". If you execute "from ..subpkg2 import mod"
+from within "pkg.subpkg1" you will import "pkg.subpkg2.mod". The
+specification for relative imports is contained in the Package
+Relative Imports section.
+
+"importlib.import_module()" is provided to support applications that
+determine dynamically the modules to be loaded.
+
+Raises an auditing event "import" with arguments "module", "filename",
+"sys.path", "sys.meta_path", "sys.path_hooks".
+
+
+Future statements
+=================
+
+A *future statement* is a directive to the compiler that a particular
+module should be compiled using syntax or semantics that will be
+available in a specified future release of Python where the feature
+becomes standard.
+
+The future statement is intended to ease migration to future versions
+of Python that introduce incompatible changes to the language.  It
+allows use of the new features on a per-module basis before the
+release in which the feature becomes standard.
+
+   future_stmt: "from" "__future__" "import" feature ["as" identifier]
+                ("," feature ["as" identifier])*
+                | "from" "__future__" "import" "(" feature ["as" identifier]
+                ("," feature ["as" identifier])* [","] ")"
+   feature:     identifier
+
+A future statement must appear near the top of the module.  The only
+lines that can appear before a future statement are:
+
+* the module docstring (if any),
+
+* comments,
+
+* blank lines, and
+
+* other future statements.
+
+The only feature that requires using the future statement is
+"annotations" (see **PEP 563**).
+
+All historical features enabled by the future statement are still
+recognized by Python 3.  The list includes "absolute_import",
+"division", "generators", "generator_stop", "unicode_literals",
+"print_function", "nested_scopes" and "with_statement".  They are all
+redundant because they are always enabled, and only kept for backwards
+compatibility.
+
+A future statement is recognized and treated specially at compile
+time: Changes to the semantics of core constructs are often
+implemented by generating different code.  It may even be the case
+that a new feature introduces new incompatible syntax (such as a new
+reserved word), in which case the compiler may need to parse the
+module differently.  Such decisions cannot be pushed off until
+runtime.
+
+For any given release, the compiler knows which feature names have
+been defined, and raises a compile-time error if a future statement
+contains a feature not known to it.
+
+The direct runtime semantics are the same as for any import statement:
+there is a standard module "__future__", described later, and it will
+be imported in the usual way at the time the future statement is
+executed.
+
+The interesting runtime semantics depend on the specific feature
+enabled by the future statement.
+
+Note that there is nothing special about the statement:
+
+   import __future__ [as name]
+
+That is not a future statement; it’s an ordinary import statement with
+no special semantics or syntax restrictions.
+
+Code compiled by calls to the built-in functions "exec()" and
+"compile()" that occur in a module "M" containing a future statement
+will, by default, use the new syntax or semantics associated with the
+future statement.  This can be controlled by optional arguments to
+"compile()" — see the documentation of that function for details.
+
+A future statement typed at an interactive interpreter prompt will
+take effect for the rest of the interpreter session.  If an
+interpreter is started with the "-i" option, is passed a script name
+to execute, and the script includes a future statement, it will be in
+effect in the interactive session started after the script is
+executed.
+
+See also:
+
+  **PEP 236** - Back to the __future__
+     The original proposal for the __future__ mechanism.
+''',
+    'in': r'''Membership test operations
+**************************
+
+The operators "in" and "not in" test for membership.  "x in s"
+evaluates to "True" if *x* is a member of *s*, and "False" otherwise.
+"x not in s" returns the negation of "x in s".  All built-in sequences
+and set types support this as well as dictionary, for which "in" tests
+whether the dictionary has a given key. For container types such as
+list, tuple, set, frozenset, dict, or collections.deque, the
+expression "x in y" is equivalent to "any(x is e or x == e for e in
+y)".
+
+For the string and bytes types, "x in y" is "True" if and only if *x*
+is a substring of *y*.  An equivalent test is "y.find(x) != -1".
+Empty strings are always considered to be a substring of any other
+string, so """ in "abc"" will return "True".
+
+For user-defined classes which define the "__contains__()" method, "x
+in y" returns "True" if "y.__contains__(x)" returns a true value, and
+"False" otherwise.
+
+For user-defined classes which do not define "__contains__()" but do
+define "__iter__()", "x in y" is "True" if some value "z", for which
+the expression "x is z or x == z" is true, is produced while iterating
+over "y". If an exception is raised during the iteration, it is as if
+"in" raised that exception.
+
+Lastly, the old-style iteration protocol is tried: if a class defines
+"__getitem__()", "x in y" is "True" if and only if there is a non-
+negative integer index *i* such that "x is y[i] or x == y[i]", and no
+lower integer index raises the "IndexError" exception.  (If any other
+exception is raised, it is as if "in" raised that exception).
+
+The operator "not in" is defined to have the inverse truth value of
+"in".
+''',
+    'integers': r'''Integer literals
+****************
+
+Integer literals denote whole numbers. For example:
+
+   7
+   3
+   2147483647
+
+There is no limit for the length of integer literals apart from what
+can be stored in available memory:
+
+   7922816251426433759354395033679228162514264337593543950336
+
+Underscores can be used to group digits for enhanced readability, and
+are ignored for determining the numeric value of the literal. For
+example, the following literals are equivalent:
+
+   100_000_000_000
+   100000000000
+   1_00_00_00_00_000
+
+Underscores can only occur between digits. For example, "_123",
+"321_", and "123__321" are *not* valid literals.
+
+Integers can be specified in binary (base 2), octal (base 8), or
+hexadecimal (base 16) using the prefixes "0b", "0o" and "0x",
+respectively. Hexadecimal digits 10 through 15 are represented by
+letters "A"-"F", case-insensitive.  For example:
+
+   0b100110111
+   0b_1110_0101
+   0o177
+   0o377
+   0xdeadbeef
+   0xDead_Beef
+
+An underscore can follow the base specifier. For example, "0x_1f" is a
+valid literal, but "0_x1f" and "0x__1f" are not.
+
+Leading zeros in a non-zero decimal number are not allowed. For
+example, "0123" is not a valid literal. This is for disambiguation
+with C-style octal literals, which Python used before version 3.0.
+
+Formally, integer literals are described by the following lexical
+definitions:
+
+   integer:      decinteger | bininteger | octinteger | hexinteger | zerointeger
+   decinteger:   nonzerodigit (["_"] digit)*
+   bininteger:   "0" ("b" | "B") (["_"] bindigit)+
+   octinteger:   "0" ("o" | "O") (["_"] octdigit)+
+   hexinteger:   "0" ("x" | "X") (["_"] hexdigit)+
+   zerointeger:  "0"+ (["_"] "0")*
+   nonzerodigit: "1"..."9"
+   digit:        "0"..."9"
+   bindigit:     "0" | "1"
+   octdigit:     "0"..."7"
+   hexdigit:     digit | "a"..."f" | "A"..."F"
+
+Changed in version 3.6: Underscores are now allowed for grouping
+purposes in literals.
+''',
+    'lambda': r'''Lambdas
+*******
+
+   lambda_expr: "lambda" [parameter_list] ":" expression
+
+Lambda expressions (sometimes called lambda forms) are used to create
+anonymous functions. The expression "lambda parameters: expression"
+yields a function object.  The unnamed object behaves like a function
+object defined with:
+
+   def <lambda>(parameters):
+       return expression
+
+See section Function definitions for the syntax of parameter lists.
+Note that functions created with lambda expressions cannot contain
+statements or annotations.
+''',
+    'lists': r'''List displays
+*************
+
+A list display is a possibly empty series of expressions enclosed in
+square brackets:
+
+   list_display: "[" [flexible_expression_list | comprehension] "]"
+
+A list display yields a new list object, the contents being specified
+by either a list of expressions or a comprehension.  When a comma-
+separated list of expressions is supplied, its elements are evaluated
+from left to right and placed into the list object in that order.
+When a comprehension is supplied, the list is constructed from the
+elements resulting from the comprehension.
+''',
+    'naming': r'''Naming and binding
+******************
+
+
+Binding of names
+================
+
+*Names* refer to objects.  Names are introduced by name binding
+operations.
+
+The following constructs bind names:
+
+* formal parameters to functions,
+
+* class definitions,
+
+* function definitions,
+
+* assignment expressions,
+
+* targets that are identifiers if occurring in an assignment:
+
+  * "for" loop header,
+
+  * after "as" in a "with" statement, "except" clause, "except*"
+    clause, or in the as-pattern in structural pattern matching,
+
+  * in a capture pattern in structural pattern matching
+
+* "import" statements.
+
+* "type" statements.
+
+* type parameter lists.
+
+The "import" statement of the form "from ... import *" binds all names
+defined in the imported module, except those beginning with an
+underscore. This form may only be used at the module level.
+
+A target occurring in a "del" statement is also considered bound for
+this purpose (though the actual semantics are to unbind the name).
+
+Each assignment or import statement occurs within a block defined by a
+class or function definition or at the module level (the top-level
+code block).
+
+If a name is bound in a block, it is a local variable of that block,
+unless declared as "nonlocal" or "global".  If a name is bound at the
+module level, it is a global variable.  (The variables of the module
+code block are local and global.)  If a variable is used in a code
+block but not defined there, it is a *free variable*.
+
+Each occurrence of a name in the program text refers to the *binding*
+of that name established by the following name resolution rules.
+
+
+Resolution of names
+===================
+
+A *scope* defines the visibility of a name within a block.  If a local
+variable is defined in a block, its scope includes that block.  If the
+definition occurs in a function block, the scope extends to any blocks
+contained within the defining one, unless a contained block introduces
+a different binding for the name.
+
+When a name is used in a code block, it is resolved using the nearest
+enclosing scope.  The set of all such scopes visible to a code block
+is called the block’s *environment*.
+
+When a name is not found at all, a "NameError" exception is raised. If
+the current scope is a function scope, and the name refers to a local
+variable that has not yet been bound to a value at the point where the
+name is used, an "UnboundLocalError" exception is raised.
+"UnboundLocalError" is a subclass of "NameError".
+
+If a name binding operation occurs anywhere within a code block, all
+uses of the name within the block are treated as references to the
+current block.  This can lead to errors when a name is used within a
+block before it is bound.  This rule is subtle.  Python lacks
+declarations and allows name binding operations to occur anywhere
+within a code block.  The local variables of a code block can be
+determined by scanning the entire text of the block for name binding
+operations. See the FAQ entry on UnboundLocalError for examples.
+
+If the "global" statement occurs within a block, all uses of the names
+specified in the statement refer to the bindings of those names in the
+top-level namespace.  Names are resolved in the top-level namespace by
+searching the global namespace, i.e. the namespace of the module
+containing the code block, and the builtins namespace, the namespace
+of the module "builtins".  The global namespace is searched first.  If
+the names are not found there, the builtins namespace is searched
+next. If the names are also not found in the builtins namespace, new
+variables are created in the global namespace. The global statement
+must precede all uses of the listed names.
+
+The "global" statement has the same scope as a name binding operation
+in the same block.  If the nearest enclosing scope for a free variable
+contains a global statement, the free variable is treated as a global.
+
+The "nonlocal" statement causes corresponding names to refer to
+previously bound variables in the nearest enclosing function scope.
+"SyntaxError" is raised at compile time if the given name does not
+exist in any enclosing function scope. Type parameters cannot be
+rebound with the "nonlocal" statement.
+
+The namespace for a module is automatically created the first time a
+module is imported.  The main module for a script is always called
+"__main__".
+
+Class definition blocks and arguments to "exec()" and "eval()" are
+special in the context of name resolution. A class definition is an
+executable statement that may use and define names. These references
+follow the normal rules for name resolution with an exception that
+unbound local variables are looked up in the global namespace. The
+namespace of the class definition becomes the attribute dictionary of
+the class. The scope of names defined in a class block is limited to
+the class block; it does not extend to the code blocks of methods.
+This includes comprehensions and generator expressions, but it does
+not include annotation scopes, which have access to their enclosing
+class scopes. This means that the following will fail:
+
+   class A:
+       a = 42
+       b = list(a + i for i in range(10))
+
+However, the following will succeed:
+
+   class A:
+       type Alias = Nested
+       class Nested: pass
+
+   print(A.Alias.__value__)  # <type 'A.Nested'>
+
+
+Annotation scopes
+=================
+
+*Annotations*, type parameter lists and "type" statements introduce
+*annotation scopes*, which behave mostly like function scopes, but
+with some exceptions discussed below.
+
+Annotation scopes are used in the following contexts:
+
+* *Function annotations*.
+
+* *Variable annotations*.
+
+* Type parameter lists for generic type aliases.
+
+* Type parameter lists for generic functions. A generic function’s
+  annotations are executed within the annotation scope, but its
+  defaults and decorators are not.
+
+* Type parameter lists for generic classes. A generic class’s base
+  classes and keyword arguments are executed within the annotation
+  scope, but its decorators are not.
+
+* The bounds, constraints, and default values for type parameters
+  (lazily evaluated).
+
+* The value of type aliases (lazily evaluated).
+
+Annotation scopes differ from function scopes in the following ways:
+
+* Annotation scopes have access to their enclosing class namespace. If
+  an annotation scope is immediately within a class scope, or within
+  another annotation scope that is immediately within a class scope,
+  the code in the annotation scope can use names defined in the class
+  scope as if it were executed directly within the class body. This
+  contrasts with regular functions defined within classes, which
+  cannot access names defined in the class scope.
+
+* Expressions in annotation scopes cannot contain "yield", "yield
+  from", "await", or ":=" expressions. (These expressions are allowed
+  in other scopes contained within the annotation scope.)
+
+* Names defined in annotation scopes cannot be rebound with "nonlocal"
+  statements in inner scopes. This includes only type parameters, as
+  no other syntactic elements that can appear within annotation scopes
+  can introduce new names.
+
+* While annotation scopes have an internal name, that name is not
+  reflected in the *qualified name* of objects defined within the
+  scope. Instead, the "__qualname__" of such objects is as if the
+  object were defined in the enclosing scope.
+
+Added in version 3.12: Annotation scopes were introduced in Python
+3.12 as part of **PEP 695**.
+
+Changed in version 3.13: Annotation scopes are also used for type
+parameter defaults, as introduced by **PEP 696**.
+
+Changed in version 3.14: Annotation scopes are now also used for
+annotations, as specified in **PEP 649** and **PEP 749**.
+
+
+Lazy evaluation
+===============
+
+Most annotation scopes are *lazily evaluated*. This includes
+annotations, the values of type aliases created through the "type"
+statement, and the bounds, constraints, and default values of type
+variables created through the type parameter syntax. This means that
+they are not evaluated when the type alias or type variable is
+created, or when the object carrying annotations is created. Instead,
+they are only evaluated when necessary, for example when the
+"__value__" attribute on a type alias is accessed.
+
+Example:
+
+   >>> type Alias = 1/0
+   >>> Alias.__value__
+   Traceback (most recent call last):
+     ...
+   ZeroDivisionError: division by zero
+   >>> def func[T: 1/0](): pass
+   >>> T = func.__type_params__[0]
+   >>> T.__bound__
+   Traceback (most recent call last):
+     ...
+   ZeroDivisionError: division by zero
+
+Here the exception is raised only when the "__value__" attribute of
+the type alias or the "__bound__" attribute of the type variable is
+accessed.
+
+This behavior is primarily useful for references to types that have
+not yet been defined when the type alias or type variable is created.
+For example, lazy evaluation enables creation of mutually recursive
+type aliases:
+
+   from typing import Literal
+
+   type SimpleExpr = int | Parenthesized
+   type Parenthesized = tuple[Literal["("], Expr, Literal[")"]]
+   type Expr = SimpleExpr | tuple[SimpleExpr, Literal["+", "-"], Expr]
+
+Lazily evaluated values are evaluated in annotation scope, which means
+that names that appear inside the lazily evaluated value are looked up
+as if they were used in the immediately enclosing scope.
+
+Added in version 3.12.
+
+
+Builtins and restricted execution
+=================================
+
+**CPython implementation detail:** Users should not touch
+"__builtins__"; it is strictly an implementation detail.  Users
+wanting to override values in the builtins namespace should "import"
+the "builtins" module and modify its attributes appropriately.
+
+The builtins namespace associated with the execution of a code block
+is actually found by looking up the name "__builtins__" in its global
+namespace; this should be a dictionary or a module (in the latter case
+the module’s dictionary is used).  By default, when in the "__main__"
+module, "__builtins__" is the built-in module "builtins"; when in any
+other module, "__builtins__" is an alias for the dictionary of the
+"builtins" module itself.
+
+
+Interaction with dynamic features
+=================================
+
+Name resolution of free variables occurs at runtime, not at compile
+time. This means that the following code will print 42:
+
+   i = 10
+   def f():
+       print(i)
+   i = 42
+   f()
+
+The "eval()" and "exec()" functions do not have access to the full
+environment for resolving names.  Names may be resolved in the local
+and global namespaces of the caller.  Free variables are not resolved
+in the nearest enclosing namespace, but in the global namespace.  [1]
+The "exec()" and "eval()" functions have optional arguments to
+override the global and local namespace.  If only one namespace is
+specified, it is used for both.
+''',
+    'nonlocal': r'''The "nonlocal" statement
+************************
+
+   nonlocal_stmt: "nonlocal" identifier ("," identifier)*
+
+When the definition of a function or class is nested (enclosed) within
+the definitions of other functions, its nonlocal scopes are the local
+scopes of the enclosing functions. The "nonlocal" statement causes the
+listed identifiers to refer to names previously bound in nonlocal
+scopes. It allows encapsulated code to rebind such nonlocal
+identifiers.  If a name is bound in more than one nonlocal scope, the
+nearest binding is used. If a name is not bound in any nonlocal scope,
+or if there is no nonlocal scope, a "SyntaxError" is raised.
+
+The "nonlocal" statement applies to the entire scope of a function or
+class body. A "SyntaxError" is raised if a variable is used or
+assigned to prior to its nonlocal declaration in the scope.
+
+See also:
+
+  **PEP 3104** - Access to Names in Outer Scopes
+     The specification for the "nonlocal" statement.
+
+**Programmer’s note:** "nonlocal" is a directive to the parser and
+applies only to code parsed along with it.  See the note for the
+"global" statement.
+''',
+    'numbers': r'''Numeric literals
+****************
+
+"NUMBER" tokens represent numeric literals, of which there are three
+types: integers, floating-point numbers, and imaginary numbers.
+
+   NUMBER: integer | floatnumber | imagnumber
+
+The numeric value of a numeric literal is the same as if it were
+passed as a string to the "int", "float" or "complex" class
+constructor, respectively. Note that not all valid inputs for those
+constructors are also valid literals.
+
+Numeric literals do not include a sign; a phrase like "-1" is actually
+an expression composed of the unary operator ‘"-"’ and the literal
+"1".
+
+
+Integer literals
+================
+
+Integer literals denote whole numbers. For example:
+
+   7
+   3
+   2147483647
+
+There is no limit for the length of integer literals apart from what
+can be stored in available memory:
+
+   7922816251426433759354395033679228162514264337593543950336
+
+Underscores can be used to group digits for enhanced readability, and
+are ignored for determining the numeric value of the literal. For
+example, the following literals are equivalent:
+
+   100_000_000_000
+   100000000000
+   1_00_00_00_00_000
+
+Underscores can only occur between digits. For example, "_123",
+"321_", and "123__321" are *not* valid literals.
+
+Integers can be specified in binary (base 2), octal (base 8), or
+hexadecimal (base 16) using the prefixes "0b", "0o" and "0x",
+respectively. Hexadecimal digits 10 through 15 are represented by
+letters "A"-"F", case-insensitive.  For example:
+
+   0b100110111
+   0b_1110_0101
+   0o177
+   0o377
+   0xdeadbeef
+   0xDead_Beef
+
+An underscore can follow the base specifier. For example, "0x_1f" is a
+valid literal, but "0_x1f" and "0x__1f" are not.
+
+Leading zeros in a non-zero decimal number are not allowed. For
+example, "0123" is not a valid literal. This is for disambiguation
+with C-style octal literals, which Python used before version 3.0.
+
+Formally, integer literals are described by the following lexical
+definitions:
+
+   integer:      decinteger | bininteger | octinteger | hexinteger | zerointeger
+   decinteger:   nonzerodigit (["_"] digit)*
+   bininteger:   "0" ("b" | "B") (["_"] bindigit)+
+   octinteger:   "0" ("o" | "O") (["_"] octdigit)+
+   hexinteger:   "0" ("x" | "X") (["_"] hexdigit)+
+   zerointeger:  "0"+ (["_"] "0")*
+   nonzerodigit: "1"..."9"
+   digit:        "0"..."9"
+   bindigit:     "0" | "1"
+   octdigit:     "0"..."7"
+   hexdigit:     digit | "a"..."f" | "A"..."F"
+
+Changed in version 3.6: Underscores are now allowed for grouping
+purposes in literals.
+
+
+Floating-point literals
+=======================
+
+Floating-point (float) literals, such as "3.14" or "1.5", denote
+approximations of real numbers.
+
+They consist of *integer* and *fraction* parts, each composed of
+decimal digits. The parts are separated by a decimal point, ".":
+
+   2.71828
+   4.0
+
+Unlike in integer literals, leading zeros are allowed. For example,
+"077.010" is legal, and denotes the same number as "77.01".
+
+As in integer literals, single underscores may occur between digits to
+help readability:
+
+   96_485.332_123
+   3.14_15_93
+
+Either of these parts, but not both, can be empty. For example:
+
+   10.  # (equivalent to 10.0)
+   .001  # (equivalent to 0.001)
+
+Optionally, the integer and fraction may be followed by an *exponent*:
+the letter "e" or "E", followed by an optional sign, "+" or "-", and a
+number in the same format as the integer and fraction parts. The "e"
+or "E" represents “times ten raised to the power of”:
+
+   1.0e3  # (represents 1.0×10³, or 1000.0)
+   1.166e-5  # (represents 1.166×10⁻⁵, or 0.00001166)
+   6.02214076e+23  # (represents 6.02214076×10²³, or 602214076000000000000000.)
+
+In floats with only integer and exponent parts, the decimal point may
+be omitted:
+
+   1e3  # (equivalent to 1.e3 and 1.0e3)
+   0e0  # (equivalent to 0.)
+
+Formally, floating-point literals are described by the following
+lexical definitions:
+
+   floatnumber:
+      | digitpart "." [digitpart] [exponent]
+      | "." digitpart [exponent]
+      | digitpart exponent
+   digitpart: digit (["_"] digit)*
+   exponent:  ("e" | "E") ["+" | "-"] digitpart
+
+Changed in version 3.6: Underscores are now allowed for grouping
+purposes in literals.
+
+
+Imaginary literals
+==================
+
+Python has complex number objects, but no complex literals. Instead,
+*imaginary literals* denote complex numbers with a zero real part.
+
+For example, in math, the complex number 3+4.2*i* is written as the
+real number 3 added to the imaginary number 4.2*i*. Python uses a
+similar syntax, except the imaginary unit is written as "j" rather
+than *i*:
+
+   3+4.2j
+
+This is an expression composed of the integer literal "3", the
+operator ‘"+"’, and the imaginary literal "4.2j". Since these are
+three separate tokens, whitespace is allowed between them:
+
+   3 + 4.2j
+
+No whitespace is allowed *within* each token. In particular, the "j"
+suffix, may not be separated from the number before it.
+
+The number before the "j" has the same syntax as a floating-point
+literal. Thus, the following are valid imaginary literals:
+
+   4.2j
+   3.14j
+   10.j
+   .001j
+   1e100j
+   3.14e-10j
+   3.14_15_93j
+
+Unlike in a floating-point literal the decimal point can be omitted if
+the imaginary number only has an integer part. The number is still
+evaluated as a floating-point number, not an integer:
+
+   10j
+   0j
+   1000000000000000000000000j   # equivalent to 1e+24j
+
+The "j" suffix is case-insensitive. That means you can use "J"
+instead:
+
+   3.14J   # equivalent to 3.14j
+
+Formally, imaginary literals are described by the following lexical
+definition:
+
+   imagnumber: (floatnumber | digitpart) ("j" | "J")
+''',
+    'numeric-types': r'''Emulating numeric types
+***********************
+
+The following methods can be defined to emulate numeric objects.
+Methods corresponding to operations that are not supported by the
+particular kind of number implemented (e.g., bitwise operations for
+non-integral numbers) should be left undefined.
+
+object.__add__(self, other)
+object.__sub__(self, other)
+object.__mul__(self, other)
+object.__matmul__(self, other)
+object.__truediv__(self, other)
+object.__floordiv__(self, other)
+object.__mod__(self, other)
+object.__divmod__(self, other)
+object.__pow__(self, other[, modulo])
+object.__lshift__(self, other)
+object.__rshift__(self, other)
+object.__and__(self, other)
+object.__xor__(self, other)
+object.__or__(self, other)
+
+   These methods are called to implement the binary arithmetic
+   operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",
+   "pow()", "**", "<<", ">>", "&", "^", "|").  For instance, to
+   evaluate the expression "x + y", where *x* is an instance of a
+   class that has an "__add__()" method, "type(x).__add__(x, y)" is
+   called.  The "__divmod__()" method should be the equivalent to
+   using "__floordiv__()" and "__mod__()"; it should not be related to
+   "__truediv__()".  Note that "__pow__()" should be defined to accept
+   an optional third argument if the three-argument version of the
+   built-in "pow()" function is to be supported.
+
+   If one of those methods does not support the operation with the
+   supplied arguments, it should return "NotImplemented".
+
+object.__radd__(self, other)
+object.__rsub__(self, other)
+object.__rmul__(self, other)
+object.__rmatmul__(self, other)
+object.__rtruediv__(self, other)
+object.__rfloordiv__(self, other)
+object.__rmod__(self, other)
+object.__rdivmod__(self, other)
+object.__rpow__(self, other[, modulo])
+object.__rlshift__(self, other)
+object.__rrshift__(self, other)
+object.__rand__(self, other)
+object.__rxor__(self, other)
+object.__ror__(self, other)
+
+   These methods are called to implement the binary arithmetic
+   operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",
+   "pow()", "**", "<<", ">>", "&", "^", "|") with reflected (swapped)
+   operands.  These functions are only called if the operands are of
+   different types, when the left operand does not support the
+   corresponding operation [3], or the right operand’s class is
+   derived from the left operand’s class. [4] For instance, to
+   evaluate the expression "x - y", where *y* is an instance of a
+   class that has an "__rsub__()" method, "type(y).__rsub__(y, x)" is
+   called if "type(x).__sub__(x, y)" returns "NotImplemented" or
+   "type(y)" is a subclass of "type(x)". [5]
+
+   Note that "__rpow__()" should be defined to accept an optional
+   third argument if the three-argument version of the built-in
+   "pow()" function is to be supported.
+
+   Changed in version 3.14: Three-argument "pow()" now try calling
+   "__rpow__()" if necessary. Previously it was only called in two-
+   argument "pow()" and the binary power operator.
+
+   Note:
+
+     If the right operand’s type is a subclass of the left operand’s
+     type and that subclass provides a different implementation of the
+     reflected method for the operation, this method will be called
+     before the left operand’s non-reflected method. This behavior
+     allows subclasses to override their ancestors’ operations.
+
+object.__iadd__(self, other)
+object.__isub__(self, other)
+object.__imul__(self, other)
+object.__imatmul__(self, other)
+object.__itruediv__(self, other)
+object.__ifloordiv__(self, other)
+object.__imod__(self, other)
+object.__ipow__(self, other[, modulo])
+object.__ilshift__(self, other)
+object.__irshift__(self, other)
+object.__iand__(self, other)
+object.__ixor__(self, other)
+object.__ior__(self, other)
+
+   These methods are called to implement the augmented arithmetic
+   assignments ("+=", "-=", "*=", "@=", "/=", "//=", "%=", "**=",
+   "<<=", ">>=", "&=", "^=", "|=").  These methods should attempt to
+   do the operation in-place (modifying *self*) and return the result
+   (which could be, but does not have to be, *self*).  If a specific
+   method is not defined, or if that method returns "NotImplemented",
+   the augmented assignment falls back to the normal methods.  For
+   instance, if *x* is an instance of a class with an "__iadd__()"
+   method, "x += y" is equivalent to "x = x.__iadd__(y)" . If
+   "__iadd__()" does not exist, or if "x.__iadd__(y)" returns
+   "NotImplemented", "x.__add__(y)" and "y.__radd__(x)" are
+   considered, as with the evaluation of "x + y". In certain
+   situations, augmented assignment can result in unexpected errors
+   (see Why does a_tuple[i] += [‘item’] raise an exception when the
+   addition works?), but this behavior is in fact part of the data
+   model.
+
+object.__neg__(self)
+object.__pos__(self)
+object.__abs__(self)
+object.__invert__(self)
+
+   Called to implement the unary arithmetic operations ("-", "+",
+   "abs()" and "~").
+
+object.__complex__(self)
+object.__int__(self)
+object.__float__(self)
+
+   Called to implement the built-in functions "complex()", "int()" and
+   "float()".  Should return a value of the appropriate type.
+
+object.__index__(self)
+
+   Called to implement "operator.index()", and whenever Python needs
+   to losslessly convert the numeric object to an integer object (such
+   as in slicing, or in the built-in "bin()", "hex()" and "oct()"
+   functions). Presence of this method indicates that the numeric
+   object is an integer type.  Must return an integer.
+
+   If "__int__()", "__float__()" and "__complex__()" are not defined
+   then corresponding built-in functions "int()", "float()" and
+   "complex()" fall back to "__index__()".
+
+object.__round__(self[, ndigits])
+object.__trunc__(self)
+object.__floor__(self)
+object.__ceil__(self)
+
+   Called to implement the built-in function "round()" and "math"
+   functions "trunc()", "floor()" and "ceil()". Unless *ndigits* is
+   passed to "__round__()" all these methods should return the value
+   of the object truncated to an "Integral" (typically an "int").
+
+   Changed in version 3.14: "int()" no longer delegates to the
+   "__trunc__()" method.
+''',
+    'objects': r'''Objects, values and types
+*************************
+
+*Objects* are Python’s abstraction for data.  All data in a Python
+program is represented by objects or by relations between objects.
+Even code is represented by objects.
+
+Every object has an identity, a type and a value.  An object’s
+*identity* never changes once it has been created; you may think of it
+as the object’s address in memory.  The "is" operator compares the
+identity of two objects; the "id()" function returns an integer
+representing its identity.
+
+**CPython implementation detail:** For CPython, "id(x)" is the memory
+address where "x" is stored.
+
+An object’s type determines the operations that the object supports
+(e.g., “does it have a length?”) and also defines the possible values
+for objects of that type.  The "type()" function returns an object’s
+type (which is an object itself).  Like its identity, an object’s
+*type* is also unchangeable. [1]
+
+The *value* of some objects can change.  Objects whose value can
+change are said to be *mutable*; objects whose value is unchangeable
+once they are created are called *immutable*. (The value of an
+immutable container object that contains a reference to a mutable
+object can change when the latter’s value is changed; however the
+container is still considered immutable, because the collection of
+objects it contains cannot be changed.  So, immutability is not
+strictly the same as having an unchangeable value, it is more subtle.)
+An object’s mutability is determined by its type; for instance,
+numbers, strings and tuples are immutable, while dictionaries and
+lists are mutable.
+
+Objects are never explicitly destroyed; however, when they become
+unreachable they may be garbage-collected.  An implementation is
+allowed to postpone garbage collection or omit it altogether — it is a
+matter of implementation quality how garbage collection is
+implemented, as long as no objects are collected that are still
+reachable.
+
+**CPython implementation detail:** CPython currently uses a reference-
+counting scheme with (optional) delayed detection of cyclically linked
+garbage, which collects most objects as soon as they become
+unreachable, but is not guaranteed to collect garbage containing
+circular references.  See the documentation of the "gc" module for
+information on controlling the collection of cyclic garbage. Other
+implementations act differently and CPython may change. Do not depend
+on immediate finalization of objects when they become unreachable (so
+you should always close files explicitly).
+
+Note that the use of the implementation’s tracing or debugging
+facilities may keep objects alive that would normally be collectable.
+Also note that catching an exception with a "try"…"except" statement
+may keep objects alive.
+
+Some objects contain references to “external” resources such as open
+files or windows.  It is understood that these resources are freed
+when the object is garbage-collected, but since garbage collection is
+not guaranteed to happen, such objects also provide an explicit way to
+release the external resource, usually a "close()" method. Programs
+are strongly recommended to explicitly close such objects.  The
+"try"…"finally" statement and the "with" statement provide convenient
+ways to do this.
+
+Some objects contain references to other objects; these are called
+*containers*. Examples of containers are tuples, lists and
+dictionaries.  The references are part of a container’s value.  In
+most cases, when we talk about the value of a container, we imply the
+values, not the identities of the contained objects; however, when we
+talk about the mutability of a container, only the identities of the
+immediately contained objects are implied.  So, if an immutable
+container (like a tuple) contains a reference to a mutable object, its
+value changes if that mutable object is changed.
+
+Types affect almost all aspects of object behavior.  Even the
+importance of object identity is affected in some sense: for immutable
+types, operations that compute new values may actually return a
+reference to any existing object with the same type and value, while
+for mutable objects this is not allowed. For example, after "a = 1; b
+= 1", *a* and *b* may or may not refer to the same object with the
+value one, depending on the implementation. This is because "int" is
+an immutable type, so the reference to "1" can be reused. This
+behaviour depends on the implementation used, so should not be relied
+upon, but is something to be aware of when making use of object
+identity tests. However, after "c = []; d = []", *c* and *d* are
+guaranteed to refer to two different, unique, newly created empty
+lists. (Note that "e = f = []" assigns the *same* object to both *e*
+and *f*.)
+''',
+    'operator-summary': r'''Operator precedence
+*******************
+
+The following table summarizes the operator precedence in Python, from
+highest precedence (most binding) to lowest precedence (least
+binding).  Operators in the same box have the same precedence.  Unless
+the syntax is explicitly given, operators are binary.  Operators in
+the same box group left to right (except for exponentiation and
+conditional expressions, which group from right to left).
+
+Note that comparisons, membership tests, and identity tests, all have
+the same precedence and have a left-to-right chaining feature as
+described in the Comparisons section.
+
++-------------------------------------------------+---------------------------------------+
+| Operator                                        | Description                           |
+|=================================================|=======================================|
+| "(expressions...)",  "[expressions...]", "{key: | Binding or parenthesized expression,  |
+| value...}", "{expressions...}"                  | list display, dictionary display, set |
+|                                                 | display                               |
++-------------------------------------------------+---------------------------------------+
+| "x[index]", "x[index:index]" "x(arguments...)", | Subscription (including slicing),     |
+| "x.attribute"                                   | call, attribute reference             |
++-------------------------------------------------+---------------------------------------+
+| "await x"                                       | Await expression                      |
++-------------------------------------------------+---------------------------------------+
+| "**"                                            | Exponentiation [5]                    |
++-------------------------------------------------+---------------------------------------+
+| "+x", "-x", "~x"                                | Positive, negative, bitwise NOT       |
++-------------------------------------------------+---------------------------------------+
+| "*", "@", "/", "//", "%"                        | Multiplication, matrix                |
+|                                                 | multiplication, division, floor       |
+|                                                 | division, remainder [6]               |
++-------------------------------------------------+---------------------------------------+
+| "+", "-"                                        | Addition and subtraction              |
++-------------------------------------------------+---------------------------------------+
+| "<<", ">>"                                      | Shifts                                |
++-------------------------------------------------+---------------------------------------+
+| "&"                                             | Bitwise AND                           |
++-------------------------------------------------+---------------------------------------+
+| "^"                                             | Bitwise XOR                           |
++-------------------------------------------------+---------------------------------------+
+| "|"                                             | Bitwise OR                            |
++-------------------------------------------------+---------------------------------------+
+| "in", "not in", "is", "is not", "<", "<=", ">", | Comparisons, including membership     |
+| ">=", "!=", "=="                                | tests and identity tests              |
++-------------------------------------------------+---------------------------------------+
+| "not x"                                         | Boolean NOT                           |
++-------------------------------------------------+---------------------------------------+
+| "and"                                           | Boolean AND                           |
++-------------------------------------------------+---------------------------------------+
+| "or"                                            | Boolean OR                            |
++-------------------------------------------------+---------------------------------------+
+| "if" – "else"                                   | Conditional expression                |
++-------------------------------------------------+---------------------------------------+
+| "lambda"                                        | Lambda expression                     |
++-------------------------------------------------+---------------------------------------+
+| ":="                                            | Assignment expression                 |
++-------------------------------------------------+---------------------------------------+
+
+-[ Footnotes ]-
+
+[1] While "abs(x%y) < abs(y)" is true mathematically, for floats it
+    may not be true numerically due to roundoff.  For example, and
+    assuming a platform on which a Python float is an IEEE 754 double-
+    precision number, in order that "-1e-100 % 1e100" have the same
+    sign as "1e100", the computed result is "-1e-100 + 1e100", which
+    is numerically exactly equal to "1e100".  The function
+    "math.fmod()" returns a result whose sign matches the sign of the
+    first argument instead, and so returns "-1e-100" in this case.
+    Which approach is more appropriate depends on the application.
+
+[2] If x is very close to an exact integer multiple of y, it’s
+    possible for "x//y" to be one larger than "(x-x%y)//y" due to
+    rounding.  In such cases, Python returns the latter result, in
+    order to preserve that "divmod(x,y)[0] * y + x % y" be very close
+    to "x".
+
+[3] The Unicode standard distinguishes between *code points* (e.g.
+    U+0041) and *abstract characters* (e.g. “LATIN CAPITAL LETTER A”).
+    While most abstract characters in Unicode are only represented
+    using one code point, there is a number of abstract characters
+    that can in addition be represented using a sequence of more than
+    one code point.  For example, the abstract character “LATIN
+    CAPITAL LETTER C WITH CEDILLA” can be represented as a single
+    *precomposed character* at code position U+00C7, or as a sequence
+    of a *base character* at code position U+0043 (LATIN CAPITAL
+    LETTER C), followed by a *combining character* at code position
+    U+0327 (COMBINING CEDILLA).
+
+    The comparison operators on strings compare at the level of
+    Unicode code points. This may be counter-intuitive to humans.  For
+    example, ""\u00C7" == "\u0043\u0327"" is "False", even though both
+    strings represent the same abstract character “LATIN CAPITAL
+    LETTER C WITH CEDILLA”.
+
+    To compare strings at the level of abstract characters (that is,
+    in a way intuitive to humans), use "unicodedata.normalize()".
+
+[4] Due to automatic garbage-collection, free lists, and the dynamic
+    nature of descriptors, you may notice seemingly unusual behaviour
+    in certain uses of the "is" operator, like those involving
+    comparisons between instance methods, or constants.  Check their
+    documentation for more info.
+
+[5] The power operator "**" binds less tightly than an arithmetic or
+    bitwise unary operator on its right, that is, "2**-1" is "0.5".
+
+[6] The "%" operator is also used for string formatting; the same
+    precedence applies.
+''',
+    'pass': r'''The "pass" statement
+********************
+
+   pass_stmt: "pass"
+
+"pass" is a null operation — when it is executed, nothing happens. It
+is useful as a placeholder when a statement is required syntactically,
+but no code needs to be executed, for example:
+
+   def f(arg): pass    # a function that does nothing (yet)
+
+   class C: pass       # a class with no methods (yet)
+''',
+    'power': r'''The power operator
+******************
+
+The power operator binds more tightly than unary operators on its
+left; it binds less tightly than unary operators on its right.  The
+syntax is:
+
+   power: (await_expr | primary) ["**" u_expr]
+
+Thus, in an unparenthesized sequence of power and unary operators, the
+operators are evaluated from right to left (this does not constrain
+the evaluation order for the operands): "-1**2" results in "-1".
+
+The power operator has the same semantics as the built-in "pow()"
+function, when called with two arguments: it yields its left argument
+raised to the power of its right argument. Numeric arguments are first
+converted to a common type, and the result is of that type.
+
+For int operands, the result has the same type as the operands unless
+the second argument is negative; in that case, all arguments are
+converted to float and a float result is delivered. For example,
+"10**2" returns "100", but "10**-2" returns "0.01".
+
+Raising "0.0" to a negative power results in a "ZeroDivisionError".
+Raising a negative number to a fractional power results in a "complex"
+number. (In earlier versions it raised a "ValueError".)
+
+This operation can be customized using the special "__pow__()" and
+"__rpow__()" methods.
+''',
+    'raise': r'''The "raise" statement
+*********************
+
+   raise_stmt: "raise" [expression ["from" expression]]
+
+If no expressions are present, "raise" re-raises the exception that is
+currently being handled, which is also known as the *active
+exception*. If there isn’t currently an active exception, a
+"RuntimeError" exception is raised indicating that this is an error.
+
+Otherwise, "raise" evaluates the first expression as the exception
+object.  It must be either a subclass or an instance of
+"BaseException". If it is a class, the exception instance will be
+obtained when needed by instantiating the class with no arguments.
+
+The *type* of the exception is the exception instance’s class, the
+*value* is the instance itself.
+
+A traceback object is normally created automatically when an exception
+is raised and attached to it as the "__traceback__" attribute. You can
+create an exception and set your own traceback in one step using the
+"with_traceback()" exception method (which returns the same exception
+instance, with its traceback set to its argument), like so:
+
+   raise Exception("foo occurred").with_traceback(tracebackobj)
+
+The "from" clause is used for exception chaining: if given, the second
+*expression* must be another exception class or instance. If the
+second expression is an exception instance, it will be attached to the
+raised exception as the "__cause__" attribute (which is writable). If
+the expression is an exception class, the class will be instantiated
+and the resulting exception instance will be attached to the raised
+exception as the "__cause__" attribute. If the raised exception is not
+handled, both exceptions will be printed:
+
+   >>> try:
+   ...     print(1 / 0)
+   ... except Exception as exc:
+   ...     raise RuntimeError("Something bad happened") from exc
+   ...
+   Traceback (most recent call last):
+     File "<stdin>", line 2, in <module>
+       print(1 / 0)
+             ~~^~~
+   ZeroDivisionError: division by zero
+
+   The above exception was the direct cause of the following exception:
+
+   Traceback (most recent call last):
+     File "<stdin>", line 4, in <module>
+       raise RuntimeError("Something bad happened") from exc
+   RuntimeError: Something bad happened
+
+A similar mechanism works implicitly if a new exception is raised when
+an exception is already being handled.  An exception may be handled
+when an "except" or "finally" clause, or a "with" statement, is used.
+The previous exception is then attached as the new exception’s
+"__context__" attribute:
+
+   >>> try:
+   ...     print(1 / 0)
+   ... except:
+   ...     raise RuntimeError("Something bad happened")
+   ...
+   Traceback (most recent call last):
+     File "<stdin>", line 2, in <module>
+       print(1 / 0)
+             ~~^~~
+   ZeroDivisionError: division by zero
+
+   During handling of the above exception, another exception occurred:
+
+   Traceback (most recent call last):
+     File "<stdin>", line 4, in <module>
+       raise RuntimeError("Something bad happened")
+   RuntimeError: Something bad happened
+
+Exception chaining can be explicitly suppressed by specifying "None"
+in the "from" clause:
+
+   >>> try:
+   ...     print(1 / 0)
+   ... except:
+   ...     raise RuntimeError("Something bad happened") from None
+   ...
+   Traceback (most recent call last):
+     File "<stdin>", line 4, in <module>
+   RuntimeError: Something bad happened
+
+Additional information on exceptions can be found in section
+Exceptions, and information about handling exceptions is in section
+The try statement.
+
+Changed in version 3.3: "None" is now permitted as "Y" in "raise X
+from Y".Added the "__suppress_context__" attribute to suppress
+automatic display of the exception context.
+
+Changed in version 3.11: If the traceback of the active exception is
+modified in an "except" clause, a subsequent "raise" statement re-
+raises the exception with the modified traceback. Previously, the
+exception was re-raised with the traceback it had when it was caught.
+''',
+    'return': r'''The "return" statement
+**********************
+
+   return_stmt: "return" [expression_list]
+
+"return" may only occur syntactically nested in a function definition,
+not within a nested class definition.
+
+If an expression list is present, it is evaluated, else "None" is
+substituted.
+
+"return" leaves the current function call with the expression list (or
+"None") as return value.
+
+When "return" passes control out of a "try" statement with a "finally"
+clause, that "finally" clause is executed before really leaving the
+function.
+
+In a generator function, the "return" statement indicates that the
+generator is done and will cause "StopIteration" to be raised. The
+returned value (if any) is used as an argument to construct
+"StopIteration" and becomes the "StopIteration.value" attribute.
+
+In an asynchronous generator function, an empty "return" statement
+indicates that the asynchronous generator is done and will cause
+"StopAsyncIteration" to be raised.  A non-empty "return" statement is
+a syntax error in an asynchronous generator function.
+''',
+    'sequence-types': r'''Emulating container types
+*************************
+
+The following methods can be defined to implement container objects.
+None of them are provided by the "object" class itself. Containers
+usually are *sequences* (such as "lists" or "tuples") or *mappings*
+(like *dictionaries*), but can represent other containers as well.
+The first set of methods is used either to emulate a sequence or to
+emulate a mapping; the difference is that for a sequence, the
+allowable keys should be the integers *k* for which "0 <= k < N" where
+*N* is the length of the sequence, or "slice" objects, which define a
+range of items.  It is also recommended that mappings provide the
+methods "keys()", "values()", "items()", "get()", "clear()",
+"setdefault()", "pop()", "popitem()", "copy()", and "update()"
+behaving similar to those for Python’s standard "dictionary" objects.
+The "collections.abc" module provides a "MutableMapping" *abstract
+base class* to help create those methods from a base set of
+"__getitem__()", "__setitem__()", "__delitem__()", and "keys()".
+
+Mutable sequences should provide methods "append()", "clear()",
+"count()", "extend()", "index()", "insert()", "pop()", "remove()", and
+"reverse()", like Python standard "list" objects. Finally, sequence
+types should implement addition (meaning concatenation) and
+multiplication (meaning repetition) by defining the methods
+"__add__()", "__radd__()", "__iadd__()", "__mul__()", "__rmul__()" and
+"__imul__()" described below; they should not define other numerical
+operators.
+
+It is recommended that both mappings and sequences implement the
+"__contains__()" method to allow efficient use of the "in" operator;
+for mappings, "in" should search the mapping’s keys; for sequences, it
+should search through the values.  It is further recommended that both
+mappings and sequences implement the "__iter__()" method to allow
+efficient iteration through the container; for mappings, "__iter__()"
+should iterate through the object’s keys; for sequences, it should
+iterate through the values.
+
+object.__len__(self)
+
+   Called to implement the built-in function "len()".  Should return
+   the length of the object, an integer ">=" 0.  Also, an object that
+   doesn’t define a "__bool__()" method and whose "__len__()" method
+   returns zero is considered to be false in a Boolean context.
+
+   **CPython implementation detail:** In CPython, the length is
+   required to be at most "sys.maxsize". If the length is larger than
+   "sys.maxsize" some features (such as "len()") may raise
+   "OverflowError".  To prevent raising "OverflowError" by truth value
+   testing, an object must define a "__bool__()" method.
+
+object.__length_hint__(self)
+
+   Called to implement "operator.length_hint()". Should return an
+   estimated length for the object (which may be greater or less than
+   the actual length). The length must be an integer ">=" 0. The
+   return value may also be "NotImplemented", which is treated the
+   same as if the "__length_hint__" method didn’t exist at all. This
+   method is purely an optimization and is never required for
+   correctness.
+
+   Added in version 3.4.
+
+object.__getitem__(self, subscript)
+
+   Called to implement *subscription*, that is, "self[subscript]". See
+   Subscriptions and slicings for details on the syntax.
+
+   There are two types of built-in objects that support subscription
+   via "__getitem__()":
+
+   * **sequences**, where *subscript* (also called *index*) should be
+     an integer or a "slice" object. See the sequence documentation
+     for the expected behavior, including handling "slice" objects and
+     negative indices.
+
+   * **mappings**, where *subscript* is also called the *key*. See
+     mapping documentation for the expected behavior.
+
+   If *subscript* is of an inappropriate type, "__getitem__()" should
+   raise "TypeError". If *subscript* has an inappropriate value,
+   "__getitem__()" should raise an "LookupError" or one of its
+   subclasses ("IndexError" for sequences; "KeyError" for mappings).
+
+   Note:
+
+     Slicing is handled by "__getitem__()", "__setitem__()", and
+     "__delitem__()". A call like
+
+        a[1:2] = b
+
+     is translated to
+
+        a[slice(1, 2, None)] = b
+
+     and so forth. Missing slice items are always filled in with
+     "None".
+
+   Note:
+
+     The sequence iteration protocol (used, for example, in "for"
+     loops), expects that an "IndexError" will be raised for illegal
+     indexes to allow proper detection of the end of a sequence.
+
+   Note:
+
+     When subscripting a *class*, the special class method
+     "__class_getitem__()" may be called instead of "__getitem__()".
+     See __class_getitem__ versus __getitem__ for more details.
+
+object.__setitem__(self, key, value)
+
+   Called to implement assignment to "self[key]".  Same note as for
+   "__getitem__()".  This should only be implemented for mappings if
+   the objects support changes to the values for keys, or if new keys
+   can be added, or for sequences if elements can be replaced.  The
+   same exceptions should be raised for improper *key* values as for
+   the "__getitem__()" method.
+
+object.__delitem__(self, key)
+
+   Called to implement deletion of "self[key]".  Same note as for
+   "__getitem__()".  This should only be implemented for mappings if
+   the objects support removal of keys, or for sequences if elements
+   can be removed from the sequence.  The same exceptions should be
+   raised for improper *key* values as for the "__getitem__()" method.
+
+object.__missing__(self, key)
+
+   Called by "dict"."__getitem__()" to implement "self[key]" for dict
+   subclasses when key is not in the dictionary.
+
+object.__iter__(self)
+
+   This method is called when an *iterator* is required for a
+   container. This method should return a new iterator object that can
+   iterate over all the objects in the container.  For mappings, it
+   should iterate over the keys of the container.
+
+object.__reversed__(self)
+
+   Called (if present) by the "reversed()" built-in to implement
+   reverse iteration.  It should return a new iterator object that
+   iterates over all the objects in the container in reverse order.
+
+   If the "__reversed__()" method is not provided, the "reversed()"
+   built-in will fall back to using the sequence protocol ("__len__()"
+   and "__getitem__()").  Objects that support the sequence protocol
+   should only provide "__reversed__()" if they can provide an
+   implementation that is more efficient than the one provided by
+   "reversed()".
+
+The membership test operators ("in" and "not in") are normally
+implemented as an iteration through a container. However, container
+objects can supply the following special method with a more efficient
+implementation, which also does not require the object be iterable.
+
+object.__contains__(self, item)
+
+   Called to implement membership test operators.  Should return true
+   if *item* is in *self*, false otherwise.  For mapping objects, this
+   should consider the keys of the mapping rather than the values or
+   the key-item pairs.
+
+   For objects that don’t define "__contains__()", the membership test
+   first tries iteration via "__iter__()", then the old sequence
+   iteration protocol via "__getitem__()", see this section in the
+   language reference.
+''',
+    'shifting': r'''Shifting operations
+*******************
+
+The shifting operations have lower priority than the arithmetic
+operations:
+
+   shift_expr: a_expr | shift_expr ("<<" | ">>") a_expr
+
+These operators accept integers as arguments.  They shift the first
+argument to the left or right by the number of bits given by the
+second argument.
+
+The left shift operation can be customized using the special
+"__lshift__()" and "__rlshift__()" methods. The right shift operation
+can be customized using the special "__rshift__()" and "__rrshift__()"
+methods.
+
+A right shift by *n* bits is defined as floor division by "pow(2,n)".
+A left shift by *n* bits is defined as multiplication with "pow(2,n)".
+''',
+    'slicings': r'''Slicings
+********
+
+A more advanced form of subscription, *slicing*, is commonly used to
+extract a portion of a sequence. In this form, the subscript is a
+*slice*: up to three expressions separated by colons. Any of the
+expressions may be omitted, but a slice must contain at least one
+colon:
+
+   >>> number_names = ['zero', 'one', 'two', 'three', 'four', 'five']
+   >>> number_names[1:3]
+   ['one', 'two']
+   >>> number_names[1:]
+   ['one', 'two', 'three', 'four', 'five']
+   >>> number_names[:3]
+   ['zero', 'one', 'two']
+   >>> number_names[:]
+   ['zero', 'one', 'two', 'three', 'four', 'five']
+   >>> number_names[::2]
+   ['zero', 'two', 'four']
+   >>> number_names[:-3]
+   ['zero', 'one', 'two']
+   >>> del number_names[4:]
+   >>> number_names
+   ['zero', 'one', 'two', 'three']
+
+When a slice is evaluated, the interpreter constructs a "slice" object
+whose "start", "stop" and "step" attributes, respectively, are the
+results of the expressions between the colons. Any missing expression
+evaluates to "None". This "slice" object is then passed to the
+"__getitem__()" or "__class_getitem__()" *special method*, as above.
+
+   # continuing with the SubscriptionDemo instance defined above:
+   >>> demo[2:3]
+   subscripted with: slice(2, 3, None)
+   >>> demo[::'spam']
+   subscripted with: slice(None, None, 'spam')
+''',
+    'specialattrs': r'''Special Attributes
+******************
+
+The implementation adds a few special read-only attributes to several
+object types, where they are relevant.  Some of these are not reported
+by the "dir()" built-in function.
+
+definition.__name__
+
+   The name of the class, function, method, descriptor, or generator
+   instance.
+
+definition.__qualname__
+
+   The *qualified name* of the class, function, method, descriptor, or
+   generator instance.
+
+   Added in version 3.3.
+
+definition.__module__
+
+   The name of the module in which a class or function was defined.
+
+definition.__doc__
+
+   The documentation string of a class or function, or "None" if
+   undefined.
+
+definition.__type_params__
+
+   The type parameters of generic classes, functions, and type
+   aliases. For classes and functions that are not generic, this will
+   be an empty tuple.
+
+   Added in version 3.12.
+''',
+    'specialnames': r'''Special method names
+********************
+
+A class can implement certain operations that are invoked by special
+syntax (such as arithmetic operations or subscripting and slicing) by
+defining methods with special names. This is Python’s approach to
+*operator overloading*, allowing classes to define their own behavior
+with respect to language operators.  For instance, if a class defines
+a method named "__getitem__()", and "x" is an instance of this class,
+then "x[i]" is roughly equivalent to "type(x).__getitem__(x, i)".
+Except where mentioned, attempts to execute an operation raise an
+exception when no appropriate method is defined (typically
+"AttributeError" or "TypeError").
+
+Setting a special method to "None" indicates that the corresponding
+operation is not available.  For example, if a class sets "__iter__()"
+to "None", the class is not iterable, so calling "iter()" on its
+instances will raise a "TypeError" (without falling back to
+"__getitem__()"). [2]
+
+When implementing a class that emulates any built-in type, it is
+important that the emulation only be implemented to the degree that it
+makes sense for the object being modelled.  For example, some
+sequences may work well with retrieval of individual elements, but
+extracting a slice may not make sense. (One example of this is the
+NodeList interface in the W3C’s Document Object Model.)
+
+
+Basic customization
+===================
+
+object.__new__(cls[, ...])
+
+   Called to create a new instance of class *cls*.  "__new__()" is a
+   static method (special-cased so you need not declare it as such)
+   that takes the class of which an instance was requested as its
+   first argument.  The remaining arguments are those passed to the
+   object constructor expression (the call to the class).  The return
+   value of "__new__()" should be the new object instance (usually an
+   instance of *cls*).
+
+   Typical implementations create a new instance of the class by
+   invoking the superclass’s "__new__()" method using
+   "super().__new__(cls[, ...])" with appropriate arguments and then
+   modifying the newly created instance as necessary before returning
+   it.
+
+   If "__new__()" is invoked during object construction and it returns
+   an instance of *cls*, then the new instance’s "__init__()" method
+   will be invoked like "__init__(self[, ...])", where *self* is the
+   new instance and the remaining arguments are the same as were
+   passed to the object constructor.
+
+   If "__new__()" does not return an instance of *cls*, then the new
+   instance’s "__init__()" method will not be invoked.
+
+   "__new__()" is intended mainly to allow subclasses of immutable
+   types (like int, str, or tuple) to customize instance creation.  It
+   is also commonly overridden in custom metaclasses in order to
+   customize class creation.
+
+object.__init__(self[, ...])
+
+   Called after the instance has been created (by "__new__()"), but
+   before it is returned to the caller.  The arguments are those
+   passed to the class constructor expression.  If a base class has an
+   "__init__()" method, the derived class’s "__init__()" method, if
+   any, must explicitly call it to ensure proper initialization of the
+   base class part of the instance; for example:
+   "super().__init__([args...])".
+
+   Because "__new__()" and "__init__()" work together in constructing
+   objects ("__new__()" to create it, and "__init__()" to customize
+   it), no non-"None" value may be returned by "__init__()"; doing so
+   will cause a "TypeError" to be raised at runtime.
+
+object.__del__(self)
+
+   Called when the instance is about to be destroyed.  This is also
+   called a finalizer or (improperly) a destructor.  If a base class
+   has a "__del__()" method, the derived class’s "__del__()" method,
+   if any, must explicitly call it to ensure proper deletion of the
+   base class part of the instance.
+
+   It is possible (though not recommended!) for the "__del__()" method
+   to postpone destruction of the instance by creating a new reference
+   to it.  This is called object *resurrection*.  It is
+   implementation-dependent whether "__del__()" is called a second
+   time when a resurrected object is about to be destroyed; the
+   current *CPython* implementation only calls it once.
+
+   It is not guaranteed that "__del__()" methods are called for
+   objects that still exist when the interpreter exits.
+   "weakref.finalize" provides a straightforward way to register a
+   cleanup function to be called when an object is garbage collected.
+
+   Note:
+
+     "del x" doesn’t directly call "x.__del__()" — the former
+     decrements the reference count for "x" by one, and the latter is
+     only called when "x"’s reference count reaches zero.
+
+   **CPython implementation detail:** It is possible for a reference
+   cycle to prevent the reference count of an object from going to
+   zero.  In this case, the cycle will be later detected and deleted
+   by the *cyclic garbage collector*.  A common cause of reference
+   cycles is when an exception has been caught in a local variable.
+   The frame’s locals then reference the exception, which references
+   its own traceback, which references the locals of all frames caught
+   in the traceback.
+
+   See also: Documentation for the "gc" module.
+
+   Warning:
+
+     Due to the precarious circumstances under which "__del__()"
+     methods are invoked, exceptions that occur during their execution
+     are ignored, and a warning is printed to "sys.stderr" instead.
+     In particular:
+
+     * "__del__()" can be invoked when arbitrary code is being
+       executed, including from any arbitrary thread.  If "__del__()"
+       needs to take a lock or invoke any other blocking resource, it
+       may deadlock as the resource may already be taken by the code
+       that gets interrupted to execute "__del__()".
+
+     * "__del__()" can be executed during interpreter shutdown.  As a
+       consequence, the global variables it needs to access (including
+       other modules) may already have been deleted or set to "None".
+       Python guarantees that globals whose name begins with a single
+       underscore are deleted from their module before other globals
+       are deleted; if no other references to such globals exist, this
+       may help in assuring that imported modules are still available
+       at the time when the "__del__()" method is called.
+
+object.__repr__(self)
+
+   Called by the "repr()" built-in function to compute the “official”
+   string representation of an object.  If at all possible, this
+   should look like a valid Python expression that could be used to
+   recreate an object with the same value (given an appropriate
+   environment).  If this is not possible, a string of the form
+   "<...some useful description...>" should be returned. The return
+   value must be a string object. If a class defines "__repr__()" but
+   not "__str__()", then "__repr__()" is also used when an “informal”
+   string representation of instances of that class is required.
+
+   This is typically used for debugging, so it is important that the
+   representation is information-rich and unambiguous. A default
+   implementation is provided by the "object" class itself.
+
+object.__str__(self)
+
+   Called by "str(object)", the default "__format__()" implementation,
+   and the built-in function "print()", to compute the “informal” or
+   nicely printable string representation of an object.  The return
+   value must be a str object.
+
+   This method differs from "object.__repr__()" in that there is no
+   expectation that "__str__()" return a valid Python expression: a
+   more convenient or concise representation can be used.
+
+   The default implementation defined by the built-in type "object"
+   calls "object.__repr__()".
+
+object.__bytes__(self)
+
+   Called by bytes to compute a byte-string representation of an
+   object. This should return a "bytes" object. The "object" class
+   itself does not provide this method.
+
+object.__format__(self, format_spec)
+
+   Called by the "format()" built-in function, and by extension,
+   evaluation of formatted string literals and the "str.format()"
+   method, to produce a “formatted” string representation of an
+   object. The *format_spec* argument is a string that contains a
+   description of the formatting options desired. The interpretation
+   of the *format_spec* argument is up to the type implementing
+   "__format__()", however most classes will either delegate
+   formatting to one of the built-in types, or use a similar
+   formatting option syntax.
+
+   See Format specification mini-language for a description of the
+   standard formatting syntax.
+
+   The return value must be a string object.
+
+   The default implementation by the "object" class should be given an
+   empty *format_spec* string. It delegates to "__str__()".
+
+   Changed in version 3.4: The __format__ method of "object" itself
+   raises a "TypeError" if passed any non-empty string.
+
+   Changed in version 3.7: "object.__format__(x, '')" is now
+   equivalent to "str(x)" rather than "format(str(x), '')".
+
+object.__lt__(self, other)
+object.__le__(self, other)
+object.__eq__(self, other)
+object.__ne__(self, other)
+object.__gt__(self, other)
+object.__ge__(self, other)
+
+   These are the so-called “rich comparison” methods. The
+   correspondence between operator symbols and method names is as
+   follows: "x<y" calls "x.__lt__(y)", "x<=y" calls "x.__le__(y)",
+   "x==y" calls "x.__eq__(y)", "x!=y" calls "x.__ne__(y)", "x>y" calls
+   "x.__gt__(y)", and "x>=y" calls "x.__ge__(y)".
+
+   A rich comparison method may return the singleton "NotImplemented"
+   if it does not implement the operation for a given pair of
+   arguments. By convention, "False" and "True" are returned for a
+   successful comparison. However, these methods can return any value,
+   so if the comparison operator is used in a Boolean context (e.g.,
+   in the condition of an "if" statement), Python will call "bool()"
+   on the value to determine if the result is true or false.
+
+   By default, "object" implements "__eq__()" by using "is", returning
+   "NotImplemented" in the case of a false comparison: "True if x is y
+   else NotImplemented". For "__ne__()", by default it delegates to
+   "__eq__()" and inverts the result unless it is "NotImplemented".
+   There are no other implied relationships among the comparison
+   operators or default implementations; for example, the truth of
+   "(x<y or x==y)" does not imply "x<=y". To automatically generate
+   ordering operations from a single root operation, see
+   "functools.total_ordering()".
+
+   By default, the "object" class provides implementations consistent
+   with Value comparisons: equality compares according to object
+   identity, and order comparisons raise "TypeError". Each default
+   method may generate these results directly, but may also return
+   "NotImplemented".
+
+   See the paragraph on "__hash__()" for some important notes on
+   creating *hashable* objects which support custom comparison
+   operations and are usable as dictionary keys.
+
+   There are no swapped-argument versions of these methods (to be used
+   when the left argument does not support the operation but the right
+   argument does); rather, "__lt__()" and "__gt__()" are each other’s
+   reflection, "__le__()" and "__ge__()" are each other’s reflection,
+   and "__eq__()" and "__ne__()" are their own reflection. If the
+   operands are of different types, and the right operand’s type is a
+   direct or indirect subclass of the left operand’s type, the
+   reflected method of the right operand has priority, otherwise the
+   left operand’s method has priority.  Virtual subclassing is not
+   considered.
+
+   When no appropriate method returns any value other than
+   "NotImplemented", the "==" and "!=" operators will fall back to
+   "is" and "is not", respectively.
+
+object.__hash__(self)
+
+   Called by built-in function "hash()" and for operations on members
+   of hashed collections including "set", "frozenset", and "dict".
+   The "__hash__()" method should return an integer. The only required
+   property is that objects which compare equal have the same hash
+   value; it is advised to mix together the hash values of the
+   components of the object that also play a part in comparison of
+   objects by packing them into a tuple and hashing the tuple.
+   Example:
+
+      def __hash__(self):
+          return hash((self.name, self.nick, self.color))
+
+   Note:
+
+     "hash()" truncates the value returned from an object’s custom
+     "__hash__()" method to the size of a "Py_ssize_t".  This is
+     typically 8 bytes on 64-bit builds and 4 bytes on 32-bit builds.
+     If an object’s   "__hash__()" must interoperate on builds of
+     different bit sizes, be sure to check the width on all supported
+     builds.  An easy way to do this is with "python -c "import sys;
+     print(sys.hash_info.width)"".
+
+   If a class does not define an "__eq__()" method it should not
+   define a "__hash__()" operation either; if it defines "__eq__()"
+   but not "__hash__()", its instances will not be usable as items in
+   hashable collections.  If a class defines mutable objects and
+   implements an "__eq__()" method, it should not implement
+   "__hash__()", since the implementation of *hashable* collections
+   requires that a key’s hash value is immutable (if the object’s hash
+   value changes, it will be in the wrong hash bucket).
+
+   User-defined classes have "__eq__()" and "__hash__()" methods by
+   default (inherited from the "object" class); with them, all objects
+   compare unequal (except with themselves) and "x.__hash__()" returns
+   an appropriate value such that "x == y" implies both that "x is y"
+   and "hash(x) == hash(y)".
+
+   A class that overrides "__eq__()" and does not define "__hash__()"
+   will have its "__hash__()" implicitly set to "None".  When the
+   "__hash__()" method of a class is "None", instances of the class
+   will raise an appropriate "TypeError" when a program attempts to
+   retrieve their hash value, and will also be correctly identified as
+   unhashable when checking "isinstance(obj,
+   collections.abc.Hashable)".
+
+   If a class that overrides "__eq__()" needs to retain the
+   implementation of "__hash__()" from a parent class, the interpreter
+   must be told this explicitly by setting "__hash__ =
+   <ParentClass>.__hash__".
+
+   If a class that does not override "__eq__()" wishes to suppress
+   hash support, it should include "__hash__ = None" in the class
+   definition. A class which defines its own "__hash__()" that
+   explicitly raises a "TypeError" would be incorrectly identified as
+   hashable by an "isinstance(obj, collections.abc.Hashable)" call.
+
+   Note:
+
+     By default, the "__hash__()" values of str and bytes objects are
+     “salted” with an unpredictable random value.  Although they
+     remain constant within an individual Python process, they are not
+     predictable between repeated invocations of Python.This is
+     intended to provide protection against a denial-of-service caused
+     by carefully chosen inputs that exploit the worst case
+     performance of a dict insertion, *O*(*n*^2) complexity.  See
+     https://ocert.org/advisories/ocert-2011-003.html for
+     details.Changing hash values affects the iteration order of sets.
+     Python has never made guarantees about this ordering (and it
+     typically varies between 32-bit and 64-bit builds).See also
+     "PYTHONHASHSEED".
+
+   Changed in version 3.3: Hash randomization is enabled by default.
+
+object.__bool__(self)
+
+   Called to implement truth value testing and the built-in operation
+   "bool()"; should return "False" or "True".  When this method is not
+   defined, "__len__()" is called, if it is defined, and the object is
+   considered true if its result is nonzero.  If a class defines
+   neither "__len__()" nor "__bool__()" (which is true of the "object"
+   class itself), all its instances are considered true.
+
+
+Customizing attribute access
+============================
+
+The following methods can be defined to customize the meaning of
+attribute access (use of, assignment to, or deletion of "x.name") for
+class instances.
+
+object.__getattr__(self, name)
+
+   Called when the default attribute access fails with an
+   "AttributeError" (either "__getattribute__()" raises an
+   "AttributeError" because *name* is not an instance attribute or an
+   attribute in the class tree for "self"; or "__get__()" of a *name*
+   property raises "AttributeError").  This method should either
+   return the (computed) attribute value or raise an "AttributeError"
+   exception. The "object" class itself does not provide this method.
+
+   Note that if the attribute is found through the normal mechanism,
+   "__getattr__()" is not called.  (This is an intentional asymmetry
+   between "__getattr__()" and "__setattr__()".) This is done both for
+   efficiency reasons and because otherwise "__getattr__()" would have
+   no way to access other attributes of the instance.  Note that at
+   least for instance variables, you can take total control by not
+   inserting any values in the instance attribute dictionary (but
+   instead inserting them in another object).  See the
+   "__getattribute__()" method below for a way to actually get total
+   control over attribute access.
+
+object.__getattribute__(self, name)
+
+   Called unconditionally to implement attribute accesses for
+   instances of the class. If the class also defines "__getattr__()",
+   the latter will not be called unless "__getattribute__()" either
+   calls it explicitly or raises an "AttributeError". This method
+   should return the (computed) attribute value or raise an
+   "AttributeError" exception. In order to avoid infinite recursion in
+   this method, its implementation should always call the base class
+   method with the same name to access any attributes it needs, for
+   example, "object.__getattribute__(self, name)".
+
+   Note:
+
+     This method may still be bypassed when looking up special methods
+     as the result of implicit invocation via language syntax or
+     built-in functions. See Special method lookup.
+
+   For certain sensitive attribute accesses, raises an auditing event
+   "object.__getattr__" with arguments "obj" and "name".
+
+object.__setattr__(self, name, value)
+
+   Called when an attribute assignment is attempted.  This is called
+   instead of the normal mechanism (i.e. store the value in the
+   instance dictionary). *name* is the attribute name, *value* is the
+   value to be assigned to it.
+
+   If "__setattr__()" wants to assign to an instance attribute, it
+   should call the base class method with the same name, for example,
+   "object.__setattr__(self, name, value)".
+
+   For certain sensitive attribute assignments, raises an auditing
+   event "object.__setattr__" with arguments "obj", "name", "value".
+
+object.__delattr__(self, name)
+
+   Like "__setattr__()" but for attribute deletion instead of
+   assignment.  This should only be implemented if "del obj.name" is
+   meaningful for the object.
+
+   For certain sensitive attribute deletions, raises an auditing event
+   "object.__delattr__" with arguments "obj" and "name".
+
+object.__dir__(self)
+
+   Called when "dir()" is called on the object. An iterable must be
+   returned. "dir()" converts the returned iterable to a list and
+   sorts it.
+
+
+Customizing module attribute access
+-----------------------------------
+
+module.__getattr__()
+module.__dir__()
+
+Special names "__getattr__" and "__dir__" can be also used to
+customize access to module attributes. The "__getattr__" function at
+the module level should accept one argument which is the name of an
+attribute and return the computed value or raise an "AttributeError".
+If an attribute is not found on a module object through the normal
+lookup, i.e. "object.__getattribute__()", then "__getattr__" is
+searched in the module "__dict__" before raising an "AttributeError".
+If found, it is called with the attribute name and the result is
+returned.
+
+The "__dir__" function should accept no arguments, and return an
+iterable of strings that represents the names accessible on module. If
+present, this function overrides the standard "dir()" search on a
+module.
+
+module.__class__
+
+For a more fine grained customization of the module behavior (setting
+attributes, properties, etc.), one can set the "__class__" attribute
+of a module object to a subclass of "types.ModuleType". For example:
+
+   import sys
+   from types import ModuleType
+
+   class VerboseModule(ModuleType):
+       def __repr__(self):
+           return f'Verbose {self.__name__}'
+
+       def __setattr__(self, attr, value):
+           print(f'Setting {attr}...')
+           super().__setattr__(attr, value)
+
+   sys.modules[__name__].__class__ = VerboseModule
+
+Note:
+
+  Defining module "__getattr__" and setting module "__class__" only
+  affect lookups made using the attribute access syntax – directly
+  accessing the module globals (whether by code within the module, or
+  via a reference to the module’s globals dictionary) is unaffected.
+
+Changed in version 3.5: "__class__" module attribute is now writable.
+
+Added in version 3.7: "__getattr__" and "__dir__" module attributes.
+
+See also:
+
+  **PEP 562** - Module __getattr__ and __dir__
+     Describes the "__getattr__" and "__dir__" functions on modules.
+
+
+Implementing Descriptors
+------------------------
+
+The following methods only apply when an instance of the class
+containing the method (a so-called *descriptor* class) appears in an
+*owner* class (the descriptor must be in either the owner’s class
+dictionary or in the class dictionary for one of its parents).  In the
+examples below, “the attribute” refers to the attribute whose name is
+the key of the property in the owner class’ "__dict__".  The "object"
+class itself does not implement any of these protocols.
+
+object.__get__(self, instance, owner=None)
+
+   Called to get the attribute of the owner class (class attribute
+   access) or of an instance of that class (instance attribute
+   access). The optional *owner* argument is the owner class, while
+   *instance* is the instance that the attribute was accessed through,
+   or "None" when the attribute is accessed through the *owner*.
+
+   This method should return the computed attribute value or raise an
+   "AttributeError" exception.
+
+   **PEP 252** specifies that "__get__()" is callable with one or two
+   arguments.  Python’s own built-in descriptors support this
+   specification; however, it is likely that some third-party tools
+   have descriptors that require both arguments.  Python’s own
+   "__getattribute__()" implementation always passes in both arguments
+   whether they are required or not.
+
+object.__set__(self, instance, value)
+
+   Called to set the attribute on an instance *instance* of the owner
+   class to a new value, *value*.
+
+   Note, adding "__set__()" or "__delete__()" changes the kind of
+   descriptor to a “data descriptor”.  See Invoking Descriptors for
+   more details.
+
+object.__delete__(self, instance)
+
+   Called to delete the attribute on an instance *instance* of the
+   owner class.
+
+Instances of descriptors may also have the "__objclass__" attribute
+present:
+
+object.__objclass__
+
+   The attribute "__objclass__" is interpreted by the "inspect" module
+   as specifying the class where this object was defined (setting this
+   appropriately can assist in runtime introspection of dynamic class
+   attributes). For callables, it may indicate that an instance of the
+   given type (or a subclass) is expected or required as the first
+   positional argument (for example, CPython sets this attribute for
+   unbound methods that are implemented in C).
+
+
+Invoking Descriptors
+--------------------
+
+In general, a descriptor is an object attribute with “binding
+behavior”, one whose attribute access has been overridden by methods
+in the descriptor protocol:  "__get__()", "__set__()", and
+"__delete__()". If any of those methods are defined for an object, it
+is said to be a descriptor.
+
+The default behavior for attribute access is to get, set, or delete
+the attribute from an object’s dictionary. For instance, "a.x" has a
+lookup chain starting with "a.__dict__['x']", then
+"type(a).__dict__['x']", and continuing through the base classes of
+"type(a)" excluding metaclasses.
+
+However, if the looked-up value is an object defining one of the
+descriptor methods, then Python may override the default behavior and
+invoke the descriptor method instead.  Where this occurs in the
+precedence chain depends on which descriptor methods were defined and
+how they were called.
+
+The starting point for descriptor invocation is a binding, "a.x". How
+the arguments are assembled depends on "a":
+
+Direct Call
+   The simplest and least common call is when user code directly
+   invokes a descriptor method:    "x.__get__(a)".
+
+Instance Binding
+   If binding to an object instance, "a.x" is transformed into the
+   call: "type(a).__dict__['x'].__get__(a, type(a))".
+
+Class Binding
+   If binding to a class, "A.x" is transformed into the call:
+   "A.__dict__['x'].__get__(None, A)".
+
+Super Binding
+   A dotted lookup such as "super(A, a).x" searches
+   "a.__class__.__mro__" for a base class "B" following "A" and then
+   returns "B.__dict__['x'].__get__(a, A)".  If not a descriptor, "x"
+   is returned unchanged.
+
+For instance bindings, the precedence of descriptor invocation depends
+on which descriptor methods are defined.  A descriptor can define any
+combination of "__get__()", "__set__()" and "__delete__()".  If it
+does not define "__get__()", then accessing the attribute will return
+the descriptor object itself unless there is a value in the object’s
+instance dictionary.  If the descriptor defines "__set__()" and/or
+"__delete__()", it is a data descriptor; if it defines neither, it is
+a non-data descriptor.  Normally, data descriptors define both
+"__get__()" and "__set__()", while non-data descriptors have just the
+"__get__()" method.  Data descriptors with "__get__()" and "__set__()"
+(and/or "__delete__()") defined always override a redefinition in an
+instance dictionary.  In contrast, non-data descriptors can be
+overridden by instances.
+
+Python methods (including those decorated with "@staticmethod" and
+"@classmethod") are implemented as non-data descriptors.  Accordingly,
+instances can redefine and override methods.  This allows individual
+instances to acquire behaviors that differ from other instances of the
+same class.
+
+The "property()" function is implemented as a data descriptor.
+Accordingly, instances cannot override the behavior of a property.
+
+
+__slots__
+---------
+
+*__slots__* allow us to explicitly declare data members (like
+properties) and deny the creation of "__dict__" and *__weakref__*
+(unless explicitly declared in *__slots__* or available in a parent.)
+
+The space saved over using "__dict__" can be significant. Attribute
+lookup speed can be significantly improved as well.
+
+object.__slots__
+
+   This class variable can be assigned a string, iterable, or sequence
+   of strings with variable names used by instances.  *__slots__*
+   reserves space for the declared variables and prevents the
+   automatic creation of "__dict__" and *__weakref__* for each
+   instance.
+
+Notes on using *__slots__*:
+
+* When inheriting from a class without *__slots__*, the "__dict__" and
+  *__weakref__* attribute of the instances will always be accessible.
+
+* Without a "__dict__" variable, instances cannot be assigned new
+  variables not listed in the *__slots__* definition.  Attempts to
+  assign to an unlisted variable name raises "AttributeError". If
+  dynamic assignment of new variables is desired, then add
+  "'__dict__'" to the sequence of strings in the *__slots__*
+  declaration.
+
+* Without a *__weakref__* variable for each instance, classes defining
+  *__slots__* do not support "weak references" to its instances. If
+  weak reference support is needed, then add "'__weakref__'" to the
+  sequence of strings in the *__slots__* declaration.
+
+* *__slots__* are implemented at the class level by creating
+  descriptors for each variable name.  As a result, class attributes
+  cannot be used to set default values for instance variables defined
+  by *__slots__*; otherwise, the class attribute would overwrite the
+  descriptor assignment.
+
+* The action of a *__slots__* declaration is not limited to the class
+  where it is defined.  *__slots__* declared in parents are available
+  in child classes. However, instances of a child subclass will get a
+  "__dict__" and *__weakref__* unless the subclass also defines
+  *__slots__* (which should only contain names of any *additional*
+  slots).
+
+* If a class defines a slot also defined in a base class, the instance
+  variable defined by the base class slot is inaccessible (except by
+  retrieving its descriptor directly from the base class). This
+  renders the meaning of the program undefined.  In the future, a
+  check may be added to prevent this.
+
+* "TypeError" will be raised if nonempty *__slots__* are defined for a
+  class derived from a ""variable-length" built-in type" such as
+  "int", "bytes", and "tuple".
+
+* Any non-string *iterable* may be assigned to *__slots__*.
+
+* If a "dictionary" is used to assign *__slots__*, the dictionary keys
+  will be used as the slot names. The values of the dictionary can be
+  used to provide per-attribute docstrings that will be recognised by
+  "inspect.getdoc()" and displayed in the output of "help()".
+
+* "__class__" assignment works only if both classes have the same
+  *__slots__*.
+
+* Multiple inheritance with multiple slotted parent classes can be
+  used, but only one parent is allowed to have attributes created by
+  slots (the other bases must have empty slot layouts) - violations
+  raise "TypeError".
+
+* If an *iterator* is used for *__slots__* then a *descriptor* is
+  created for each of the iterator’s values. However, the *__slots__*
+  attribute will be an empty iterator.
+
+
+Customizing class creation
+==========================
+
+Whenever a class inherits from another class, "__init_subclass__()" is
+called on the parent class. This way, it is possible to write classes
+which change the behavior of subclasses. This is closely related to
+class decorators, but where class decorators only affect the specific
+class they’re applied to, "__init_subclass__" solely applies to future
+subclasses of the class defining the method.
+
+classmethod object.__init_subclass__(cls)
+
+   This method is called whenever the containing class is subclassed.
+   *cls* is then the new subclass. If defined as a normal instance
+   method, this method is implicitly converted to a class method.
+
+   Keyword arguments which are given to a new class are passed to the
+   parent class’s "__init_subclass__". For compatibility with other
+   classes using "__init_subclass__", one should take out the needed
+   keyword arguments and pass the others over to the base class, as
+   in:
+
+      class Philosopher:
+          def __init_subclass__(cls, /, default_name, **kwargs):
+              super().__init_subclass__(**kwargs)
+              cls.default_name = default_name
+
+      class AustralianPhilosopher(Philosopher, default_name="Bruce"):
+          pass
+
+   The default implementation "object.__init_subclass__" does nothing,
+   but raises an error if it is called with any arguments.
+
+   Note:
+
+     The metaclass hint "metaclass" is consumed by the rest of the
+     type machinery, and is never passed to "__init_subclass__"
+     implementations. The actual metaclass (rather than the explicit
+     hint) can be accessed as "type(cls)".
+
+   Added in version 3.6.
+
+When a class is created, "type.__new__()" scans the class variables
+and makes callbacks to those with a "__set_name__()" hook.
+
+object.__set_name__(self, owner, name)
+
+   Automatically called at the time the owning class *owner* is
+   created. The object has been assigned to *name* in that class:
+
+      class A:
+          x = C()  # Automatically calls: x.__set_name__(A, 'x')
+
+   If the class variable is assigned after the class is created,
+   "__set_name__()" will not be called automatically. If needed,
+   "__set_name__()" can be called directly:
+
+      class A:
+         pass
+
+      c = C()
+      A.x = c                  # The hook is not called
+      c.__set_name__(A, 'x')   # Manually invoke the hook
+
+   See Creating the class object for more details.
+
+   Added in version 3.6.
+
+
+Metaclasses
+-----------
+
+By default, classes are constructed using "type()". The class body is
+executed in a new namespace and the class name is bound locally to the
+result of "type(name, bases, namespace)".
+
+The class creation process can be customized by passing the
+"metaclass" keyword argument in the class definition line, or by
+inheriting from an existing class that included such an argument. In
+the following example, both "MyClass" and "MySubclass" are instances
+of "Meta":
+
+   class Meta(type):
+       pass
+
+   class MyClass(metaclass=Meta):
+       pass
+
+   class MySubclass(MyClass):
+       pass
+
+Any other keyword arguments that are specified in the class definition
+are passed through to all metaclass operations described below.
+
+When a class definition is executed, the following steps occur:
+
+* MRO entries are resolved;
+
+* the appropriate metaclass is determined;
+
+* the class namespace is prepared;
+
+* the class body is executed;
+
+* the class object is created.
+
+
+Resolving MRO entries
+---------------------
+
+object.__mro_entries__(self, bases)
+
+   If a base that appears in a class definition is not an instance of
+   "type", then an "__mro_entries__()" method is searched on the base.
+   If an "__mro_entries__()" method is found, the base is substituted
+   with the result of a call to "__mro_entries__()" when creating the
+   class. The method is called with the original bases tuple passed to
+   the *bases* parameter, and must return a tuple of classes that will
+   be used instead of the base. The returned tuple may be empty: in
+   these cases, the original base is ignored.
+
+See also:
+
+  "types.resolve_bases()"
+     Dynamically resolve bases that are not instances of "type".
+
+  "types.get_original_bases()"
+     Retrieve a class’s “original bases” prior to modifications by
+     "__mro_entries__()".
+
+  **PEP 560**
+     Core support for typing module and generic types.
+
+
+Determining the appropriate metaclass
+-------------------------------------
+
+The appropriate metaclass for a class definition is determined as
+follows:
+
+* if no bases and no explicit metaclass are given, then "type()" is
+  used;
+
+* if an explicit metaclass is given and it is *not* an instance of
+  "type()", then it is used directly as the metaclass;
+
+* if an instance of "type()" is given as the explicit metaclass, or
+  bases are defined, then the most derived metaclass is used.
+
+The most derived metaclass is selected from the explicitly specified
+metaclass (if any) and the metaclasses (i.e. "type(cls)") of all
+specified base classes. The most derived metaclass is one which is a
+subtype of *all* of these candidate metaclasses. If none of the
+candidate metaclasses meets that criterion, then the class definition
+will fail with "TypeError".
+
+
+Preparing the class namespace
+-----------------------------
+
+Once the appropriate metaclass has been identified, then the class
+namespace is prepared. If the metaclass has a "__prepare__" attribute,
+it is called as "namespace = metaclass.__prepare__(name, bases,
+**kwds)" (where the additional keyword arguments, if any, come from
+the class definition). The "__prepare__" method should be implemented
+as a "classmethod". The namespace returned by "__prepare__" is passed
+in to "__new__", but when the final class object is created the
+namespace is copied into a new "dict".
+
+If the metaclass has no "__prepare__" attribute, then the class
+namespace is initialised as an empty ordered mapping.
+
+See also:
+
+  **PEP 3115** - Metaclasses in Python 3000
+     Introduced the "__prepare__" namespace hook
+
+
+Executing the class body
+------------------------
+
+The class body is executed (approximately) as "exec(body, globals(),
+namespace)". The key difference from a normal call to "exec()" is that
+lexical scoping allows the class body (including any methods) to
+reference names from the current and outer scopes when the class
+definition occurs inside a function.
+
+However, even when the class definition occurs inside the function,
+methods defined inside the class still cannot see names defined at the
+class scope. Class variables must be accessed through the first
+parameter of instance or class methods, or through the implicit
+lexically scoped "__class__" reference described in the next section.
+
+
+Creating the class object
+-------------------------
+
+Once the class namespace has been populated by executing the class
+body, the class object is created by calling "metaclass(name, bases,
+namespace, **kwds)" (the additional keywords passed here are the same
+as those passed to "__prepare__").
+
+This class object is the one that will be referenced by the zero-
+argument form of "super()". "__class__" is an implicit closure
+reference created by the compiler if any methods in a class body refer
+to either "__class__" or "super". This allows the zero argument form
+of "super()" to correctly identify the class being defined based on
+lexical scoping, while the class or instance that was used to make the
+current call is identified based on the first argument passed to the
+method.
+
+**CPython implementation detail:** In CPython 3.6 and later, the
+"__class__" cell is passed to the metaclass as a "__classcell__" entry
+in the class namespace. If present, this must be propagated up to the
+"type.__new__" call in order for the class to be initialised
+correctly. Failing to do so will result in a "RuntimeError" in Python
+3.8.
+
+When using the default metaclass "type", or any metaclass that
+ultimately calls "type.__new__", the following additional
+customization steps are invoked after creating the class object:
+
+1. The "type.__new__" method collects all of the attributes in the
+   class namespace that define a "__set_name__()" method;
+
+2. Those "__set_name__" methods are called with the class being
+   defined and the assigned name of that particular attribute;
+
+3. The "__init_subclass__()" hook is called on the immediate parent of
+   the new class in its method resolution order.
+
+After the class object is created, it is passed to the class
+decorators included in the class definition (if any) and the resulting
+object is bound in the local namespace as the defined class.
+
+When a new class is created by "type.__new__", the object provided as
+the namespace parameter is copied to a new ordered mapping and the
+original object is discarded. The new copy is wrapped in a read-only
+proxy, which becomes the "__dict__" attribute of the class object.
+
+See also:
+
+  **PEP 3135** - New super
+     Describes the implicit "__class__" closure reference
+
+
+Uses for metaclasses
+--------------------
+
+The potential uses for metaclasses are boundless. Some ideas that have
+been explored include enum, logging, interface checking, automatic
+delegation, automatic property creation, proxies, frameworks, and
+automatic resource locking/synchronization.
+
+
+Customizing instance and subclass checks
+========================================
+
+The following methods are used to override the default behavior of the
+"isinstance()" and "issubclass()" built-in functions.
+
+In particular, the metaclass "abc.ABCMeta" implements these methods in
+order to allow the addition of Abstract Base Classes (ABCs) as
+“virtual base classes” to any class or type (including built-in
+types), including other ABCs.
+
+type.__instancecheck__(self, instance)
+
+   Return true if *instance* should be considered a (direct or
+   indirect) instance of *class*. If defined, called to implement
+   "isinstance(instance, class)".
+
+type.__subclasscheck__(self, subclass)
+
+   Return true if *subclass* should be considered a (direct or
+   indirect) subclass of *class*.  If defined, called to implement
+   "issubclass(subclass, class)".
+
+Note that these methods are looked up on the type (metaclass) of a
+class.  They cannot be defined as class methods in the actual class.
+This is consistent with the lookup of special methods that are called
+on instances, only in this case the instance is itself a class.
+
+See also:
+
+  **PEP 3119** - Introducing Abstract Base Classes
+     Includes the specification for customizing "isinstance()" and
+     "issubclass()" behavior through "__instancecheck__()" and
+     "__subclasscheck__()", with motivation for this functionality in
+     the context of adding Abstract Base Classes (see the "abc"
+     module) to the language.
+
+
+Emulating generic types
+=======================
+
+When using *type annotations*, it is often useful to *parameterize* a
+*generic type* using Python’s square-brackets notation. For example,
+the annotation "list[int]" might be used to signify a "list" in which
+all the elements are of type "int".
+
+See also:
+
+  **PEP 484** - Type Hints
+     Introducing Python’s framework for type annotations
+
+  Generic Alias Types
+     Documentation for objects representing parameterized generic
+     classes
+
+  Generics, user-defined generics and "typing.Generic"
+     Documentation on how to implement generic classes that can be
+     parameterized at runtime and understood by static type-checkers.
+
+A class can *generally* only be parameterized if it defines the
+special class method "__class_getitem__()".
+
+classmethod object.__class_getitem__(cls, key)
+
+   Return an object representing the specialization of a generic class
+   by type arguments found in *key*.
+
+   When defined on a class, "__class_getitem__()" is automatically a
+   class method. As such, there is no need for it to be decorated with
+   "@classmethod" when it is defined.
+
+
+The purpose of *__class_getitem__*
+----------------------------------
+
+The purpose of "__class_getitem__()" is to allow runtime
+parameterization of standard-library generic classes in order to more
+easily apply *type hints* to these classes.
+
+To implement custom generic classes that can be parameterized at
+runtime and understood by static type-checkers, users should either
+inherit from a standard library class that already implements
+"__class_getitem__()", or inherit from "typing.Generic", which has its
+own implementation of "__class_getitem__()".
+
+Custom implementations of "__class_getitem__()" on classes defined
+outside of the standard library may not be understood by third-party
+type-checkers such as mypy. Using "__class_getitem__()" on any class
+for purposes other than type hinting is discouraged.
+
+
+*__class_getitem__* versus *__getitem__*
+----------------------------------------
+
+Usually, the subscription of an object using square brackets will call
+the "__getitem__()" instance method defined on the object’s class.
+However, if the object being subscribed is itself a class, the class
+method "__class_getitem__()" may be called instead.
+"__class_getitem__()" should return a GenericAlias object if it is
+properly defined.
+
+Presented with the *expression* "obj[x]", the Python interpreter
+follows something like the following process to decide whether
+"__getitem__()" or "__class_getitem__()" should be called:
+
+   from inspect import isclass
+
+   def subscribe(obj, x):
+       """Return the result of the expression 'obj[x]'"""
+
+       class_of_obj = type(obj)
+
+       # If the class of obj defines __getitem__,
+       # call class_of_obj.__getitem__(obj, x)
+       if hasattr(class_of_obj, '__getitem__'):
+           return class_of_obj.__getitem__(obj, x)
+
+       # Else, if obj is a class and defines __class_getitem__,
+       # call obj.__class_getitem__(x)
+       elif isclass(obj) and hasattr(obj, '__class_getitem__'):
+           return obj.__class_getitem__(x)
+
+       # Else, raise an exception
+       else:
+           raise TypeError(
+               f"'{class_of_obj.__name__}' object is not subscriptable"
+           )
+
+In Python, all classes are themselves instances of other classes. The
+class of a class is known as that class’s *metaclass*, and most
+classes have the "type" class as their metaclass. "type" does not
+define "__getitem__()", meaning that expressions such as "list[int]",
+"dict[str, float]" and "tuple[str, bytes]" all result in
+"__class_getitem__()" being called:
+
+   >>> # list has class "type" as its metaclass, like most classes:
+   >>> type(list)
+   <class 'type'>
+   >>> type(dict) == type(list) == type(tuple) == type(str) == type(bytes)
+   True
+   >>> # "list[int]" calls "list.__class_getitem__(int)"
+   >>> list[int]
+   list[int]
+   >>> # list.__class_getitem__ returns a GenericAlias object:
+   >>> type(list[int])
+   <class 'types.GenericAlias'>
+
+However, if a class has a custom metaclass that defines
+"__getitem__()", subscribing the class may result in different
+behaviour. An example of this can be found in the "enum" module:
+
+   >>> from enum import Enum
+   >>> class Menu(Enum):
+   ...     """A breakfast menu"""
+   ...     SPAM = 'spam'
+   ...     BACON = 'bacon'
+   ...
+   >>> # Enum classes have a custom metaclass:
+   >>> type(Menu)
+   <class 'enum.EnumMeta'>
+   >>> # EnumMeta defines __getitem__,
+   >>> # so __class_getitem__ is not called,
+   >>> # and the result is not a GenericAlias object:
+   >>> Menu['SPAM']
+   <Menu.SPAM: 'spam'>
+   >>> type(Menu['SPAM'])
+   <enum 'Menu'>
+
+See also:
+
+  **PEP 560** - Core Support for typing module and generic types
+     Introducing "__class_getitem__()", and outlining when a
+     subscription results in "__class_getitem__()" being called
+     instead of "__getitem__()"
+
+
+Emulating callable objects
+==========================
+
+object.__call__(self[, args...])
+
+   Called when the instance is “called” as a function; if this method
+   is defined, "x(arg1, arg2, ...)" roughly translates to
+   "type(x).__call__(x, arg1, ...)". The "object" class itself does
+   not provide this method.
+
+
+Emulating container types
+=========================
+
+The following methods can be defined to implement container objects.
+None of them are provided by the "object" class itself. Containers
+usually are *sequences* (such as "lists" or "tuples") or *mappings*
+(like *dictionaries*), but can represent other containers as well.
+The first set of methods is used either to emulate a sequence or to
+emulate a mapping; the difference is that for a sequence, the
+allowable keys should be the integers *k* for which "0 <= k < N" where
+*N* is the length of the sequence, or "slice" objects, which define a
+range of items.  It is also recommended that mappings provide the
+methods "keys()", "values()", "items()", "get()", "clear()",
+"setdefault()", "pop()", "popitem()", "copy()", and "update()"
+behaving similar to those for Python’s standard "dictionary" objects.
+The "collections.abc" module provides a "MutableMapping" *abstract
+base class* to help create those methods from a base set of
+"__getitem__()", "__setitem__()", "__delitem__()", and "keys()".
+
+Mutable sequences should provide methods "append()", "clear()",
+"count()", "extend()", "index()", "insert()", "pop()", "remove()", and
+"reverse()", like Python standard "list" objects. Finally, sequence
+types should implement addition (meaning concatenation) and
+multiplication (meaning repetition) by defining the methods
+"__add__()", "__radd__()", "__iadd__()", "__mul__()", "__rmul__()" and
+"__imul__()" described below; they should not define other numerical
+operators.
+
+It is recommended that both mappings and sequences implement the
+"__contains__()" method to allow efficient use of the "in" operator;
+for mappings, "in" should search the mapping’s keys; for sequences, it
+should search through the values.  It is further recommended that both
+mappings and sequences implement the "__iter__()" method to allow
+efficient iteration through the container; for mappings, "__iter__()"
+should iterate through the object’s keys; for sequences, it should
+iterate through the values.
+
+object.__len__(self)
+
+   Called to implement the built-in function "len()".  Should return
+   the length of the object, an integer ">=" 0.  Also, an object that
+   doesn’t define a "__bool__()" method and whose "__len__()" method
+   returns zero is considered to be false in a Boolean context.
+
+   **CPython implementation detail:** In CPython, the length is
+   required to be at most "sys.maxsize". If the length is larger than
+   "sys.maxsize" some features (such as "len()") may raise
+   "OverflowError".  To prevent raising "OverflowError" by truth value
+   testing, an object must define a "__bool__()" method.
+
+object.__length_hint__(self)
+
+   Called to implement "operator.length_hint()". Should return an
+   estimated length for the object (which may be greater or less than
+   the actual length). The length must be an integer ">=" 0. The
+   return value may also be "NotImplemented", which is treated the
+   same as if the "__length_hint__" method didn’t exist at all. This
+   method is purely an optimization and is never required for
+   correctness.
+
+   Added in version 3.4.
+
+object.__getitem__(self, subscript)
+
+   Called to implement *subscription*, that is, "self[subscript]". See
+   Subscriptions and slicings for details on the syntax.
+
+   There are two types of built-in objects that support subscription
+   via "__getitem__()":
+
+   * **sequences**, where *subscript* (also called *index*) should be
+     an integer or a "slice" object. See the sequence documentation
+     for the expected behavior, including handling "slice" objects and
+     negative indices.
+
+   * **mappings**, where *subscript* is also called the *key*. See
+     mapping documentation for the expected behavior.
+
+   If *subscript* is of an inappropriate type, "__getitem__()" should
+   raise "TypeError". If *subscript* has an inappropriate value,
+   "__getitem__()" should raise an "LookupError" or one of its
+   subclasses ("IndexError" for sequences; "KeyError" for mappings).
+
+   Note:
+
+     Slicing is handled by "__getitem__()", "__setitem__()", and
+     "__delitem__()". A call like
+
+        a[1:2] = b
+
+     is translated to
+
+        a[slice(1, 2, None)] = b
+
+     and so forth. Missing slice items are always filled in with
+     "None".
+
+   Note:
+
+     The sequence iteration protocol (used, for example, in "for"
+     loops), expects that an "IndexError" will be raised for illegal
+     indexes to allow proper detection of the end of a sequence.
+
+   Note:
+
+     When subscripting a *class*, the special class method
+     "__class_getitem__()" may be called instead of "__getitem__()".
+     See __class_getitem__ versus __getitem__ for more details.
+
+object.__setitem__(self, key, value)
+
+   Called to implement assignment to "self[key]".  Same note as for
+   "__getitem__()".  This should only be implemented for mappings if
+   the objects support changes to the values for keys, or if new keys
+   can be added, or for sequences if elements can be replaced.  The
+   same exceptions should be raised for improper *key* values as for
+   the "__getitem__()" method.
+
+object.__delitem__(self, key)
+
+   Called to implement deletion of "self[key]".  Same note as for
+   "__getitem__()".  This should only be implemented for mappings if
+   the objects support removal of keys, or for sequences if elements
+   can be removed from the sequence.  The same exceptions should be
+   raised for improper *key* values as for the "__getitem__()" method.
+
+object.__missing__(self, key)
+
+   Called by "dict"."__getitem__()" to implement "self[key]" for dict
+   subclasses when key is not in the dictionary.
+
+object.__iter__(self)
+
+   This method is called when an *iterator* is required for a
+   container. This method should return a new iterator object that can
+   iterate over all the objects in the container.  For mappings, it
+   should iterate over the keys of the container.
+
+object.__reversed__(self)
+
+   Called (if present) by the "reversed()" built-in to implement
+   reverse iteration.  It should return a new iterator object that
+   iterates over all the objects in the container in reverse order.
+
+   If the "__reversed__()" method is not provided, the "reversed()"
+   built-in will fall back to using the sequence protocol ("__len__()"
+   and "__getitem__()").  Objects that support the sequence protocol
+   should only provide "__reversed__()" if they can provide an
+   implementation that is more efficient than the one provided by
+   "reversed()".
+
+The membership test operators ("in" and "not in") are normally
+implemented as an iteration through a container. However, container
+objects can supply the following special method with a more efficient
+implementation, which also does not require the object be iterable.
+
+object.__contains__(self, item)
+
+   Called to implement membership test operators.  Should return true
+   if *item* is in *self*, false otherwise.  For mapping objects, this
+   should consider the keys of the mapping rather than the values or
+   the key-item pairs.
+
+   For objects that don’t define "__contains__()", the membership test
+   first tries iteration via "__iter__()", then the old sequence
+   iteration protocol via "__getitem__()", see this section in the
+   language reference.
+
+
+Emulating numeric types
+=======================
+
+The following methods can be defined to emulate numeric objects.
+Methods corresponding to operations that are not supported by the
+particular kind of number implemented (e.g., bitwise operations for
+non-integral numbers) should be left undefined.
+
+object.__add__(self, other)
+object.__sub__(self, other)
+object.__mul__(self, other)
+object.__matmul__(self, other)
+object.__truediv__(self, other)
+object.__floordiv__(self, other)
+object.__mod__(self, other)
+object.__divmod__(self, other)
+object.__pow__(self, other[, modulo])
+object.__lshift__(self, other)
+object.__rshift__(self, other)
+object.__and__(self, other)
+object.__xor__(self, other)
+object.__or__(self, other)
+
+   These methods are called to implement the binary arithmetic
+   operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",
+   "pow()", "**", "<<", ">>", "&", "^", "|").  For instance, to
+   evaluate the expression "x + y", where *x* is an instance of a
+   class that has an "__add__()" method, "type(x).__add__(x, y)" is
+   called.  The "__divmod__()" method should be the equivalent to
+   using "__floordiv__()" and "__mod__()"; it should not be related to
+   "__truediv__()".  Note that "__pow__()" should be defined to accept
+   an optional third argument if the three-argument version of the
+   built-in "pow()" function is to be supported.
+
+   If one of those methods does not support the operation with the
+   supplied arguments, it should return "NotImplemented".
+
+object.__radd__(self, other)
+object.__rsub__(self, other)
+object.__rmul__(self, other)
+object.__rmatmul__(self, other)
+object.__rtruediv__(self, other)
+object.__rfloordiv__(self, other)
+object.__rmod__(self, other)
+object.__rdivmod__(self, other)
+object.__rpow__(self, other[, modulo])
+object.__rlshift__(self, other)
+object.__rrshift__(self, other)
+object.__rand__(self, other)
+object.__rxor__(self, other)
+object.__ror__(self, other)
+
+   These methods are called to implement the binary arithmetic
+   operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",
+   "pow()", "**", "<<", ">>", "&", "^", "|") with reflected (swapped)
+   operands.  These functions are only called if the operands are of
+   different types, when the left operand does not support the
+   corresponding operation [3], or the right operand’s class is
+   derived from the left operand’s class. [4] For instance, to
+   evaluate the expression "x - y", where *y* is an instance of a
+   class that has an "__rsub__()" method, "type(y).__rsub__(y, x)" is
+   called if "type(x).__sub__(x, y)" returns "NotImplemented" or
+   "type(y)" is a subclass of "type(x)". [5]
+
+   Note that "__rpow__()" should be defined to accept an optional
+   third argument if the three-argument version of the built-in
+   "pow()" function is to be supported.
+
+   Changed in version 3.14: Three-argument "pow()" now try calling
+   "__rpow__()" if necessary. Previously it was only called in two-
+   argument "pow()" and the binary power operator.
+
+   Note:
+
+     If the right operand’s type is a subclass of the left operand’s
+     type and that subclass provides a different implementation of the
+     reflected method for the operation, this method will be called
+     before the left operand’s non-reflected method. This behavior
+     allows subclasses to override their ancestors’ operations.
+
+object.__iadd__(self, other)
+object.__isub__(self, other)
+object.__imul__(self, other)
+object.__imatmul__(self, other)
+object.__itruediv__(self, other)
+object.__ifloordiv__(self, other)
+object.__imod__(self, other)
+object.__ipow__(self, other[, modulo])
+object.__ilshift__(self, other)
+object.__irshift__(self, other)
+object.__iand__(self, other)
+object.__ixor__(self, other)
+object.__ior__(self, other)
+
+   These methods are called to implement the augmented arithmetic
+   assignments ("+=", "-=", "*=", "@=", "/=", "//=", "%=", "**=",
+   "<<=", ">>=", "&=", "^=", "|=").  These methods should attempt to
+   do the operation in-place (modifying *self*) and return the result
+   (which could be, but does not have to be, *self*).  If a specific
+   method is not defined, or if that method returns "NotImplemented",
+   the augmented assignment falls back to the normal methods.  For
+   instance, if *x* is an instance of a class with an "__iadd__()"
+   method, "x += y" is equivalent to "x = x.__iadd__(y)" . If
+   "__iadd__()" does not exist, or if "x.__iadd__(y)" returns
+   "NotImplemented", "x.__add__(y)" and "y.__radd__(x)" are
+   considered, as with the evaluation of "x + y". In certain
+   situations, augmented assignment can result in unexpected errors
+   (see Why does a_tuple[i] += [‘item’] raise an exception when the
+   addition works?), but this behavior is in fact part of the data
+   model.
+
+object.__neg__(self)
+object.__pos__(self)
+object.__abs__(self)
+object.__invert__(self)
+
+   Called to implement the unary arithmetic operations ("-", "+",
+   "abs()" and "~").
+
+object.__complex__(self)
+object.__int__(self)
+object.__float__(self)
+
+   Called to implement the built-in functions "complex()", "int()" and
+   "float()".  Should return a value of the appropriate type.
+
+object.__index__(self)
+
+   Called to implement "operator.index()", and whenever Python needs
+   to losslessly convert the numeric object to an integer object (such
+   as in slicing, or in the built-in "bin()", "hex()" and "oct()"
+   functions). Presence of this method indicates that the numeric
+   object is an integer type.  Must return an integer.
+
+   If "__int__()", "__float__()" and "__complex__()" are not defined
+   then corresponding built-in functions "int()", "float()" and
+   "complex()" fall back to "__index__()".
+
+object.__round__(self[, ndigits])
+object.__trunc__(self)
+object.__floor__(self)
+object.__ceil__(self)
+
+   Called to implement the built-in function "round()" and "math"
+   functions "trunc()", "floor()" and "ceil()". Unless *ndigits* is
+   passed to "__round__()" all these methods should return the value
+   of the object truncated to an "Integral" (typically an "int").
+
+   Changed in version 3.14: "int()" no longer delegates to the
+   "__trunc__()" method.
+
+
+With Statement Context Managers
+===============================
+
+A *context manager* is an object that defines the runtime context to
+be established when executing a "with" statement. The context manager
+handles the entry into, and the exit from, the desired runtime context
+for the execution of the block of code.  Context managers are normally
+invoked using the "with" statement (described in section The with
+statement), but can also be used by directly invoking their methods.
+
+Typical uses of context managers include saving and restoring various
+kinds of global state, locking and unlocking resources, closing opened
+files, etc.
+
+For more information on context managers, see Context Manager Types.
+The "object" class itself does not provide the context manager
+methods.
+
+object.__enter__(self)
+
+   Enter the runtime context related to this object. The "with"
+   statement will bind this method’s return value to the target(s)
+   specified in the "as" clause of the statement, if any.
+
+object.__exit__(self, exc_type, exc_value, traceback)
+
+   Exit the runtime context related to this object. The parameters
+   describe the exception that caused the context to be exited. If the
+   context was exited without an exception, all three arguments will
+   be "None".
+
+   If an exception is supplied, and the method wishes to suppress the
+   exception (i.e., prevent it from being propagated), it should
+   return a true value. Otherwise, the exception will be processed
+   normally upon exit from this method.
+
+   Note that "__exit__()" methods should not reraise the passed-in
+   exception; this is the caller’s responsibility.
+
+See also:
+
+  **PEP 343** - The “with” statement
+     The specification, background, and examples for the Python "with"
+     statement.
+
+
+Customizing positional arguments in class pattern matching
+==========================================================
+
+When using a class name in a pattern, positional arguments in the
+pattern are not allowed by default, i.e. "case MyClass(x, y)" is
+typically invalid without special support in "MyClass". To be able to
+use that kind of pattern, the class needs to define a *__match_args__*
+attribute.
+
+object.__match_args__
+
+   This class variable can be assigned a tuple of strings. When this
+   class is used in a class pattern with positional arguments, each
+   positional argument will be converted into a keyword argument,
+   using the corresponding value in *__match_args__* as the keyword.
+   The absence of this attribute is equivalent to setting it to "()".
+
+For example, if "MyClass.__match_args__" is "("left", "center",
+"right")" that means that "case MyClass(x, y)" is equivalent to "case
+MyClass(left=x, center=y)". Note that the number of arguments in the
+pattern must be smaller than or equal to the number of elements in
+*__match_args__*; if it is larger, the pattern match attempt will
+raise a "TypeError".
+
+Added in version 3.10.
+
+See also:
+
+  **PEP 634** - Structural Pattern Matching
+     The specification for the Python "match" statement.
+
+
+Emulating buffer types
+======================
+
+The buffer protocol provides a way for Python objects to expose
+efficient access to a low-level memory array. This protocol is
+implemented by builtin types such as "bytes" and "memoryview", and
+third-party libraries may define additional buffer types.
+
+While buffer types are usually implemented in C, it is also possible
+to implement the protocol in Python.
+
+object.__buffer__(self, flags)
+
+   Called when a buffer is requested from *self* (for example, by the
+   "memoryview" constructor). The *flags* argument is an integer
+   representing the kind of buffer requested, affecting for example
+   whether the returned buffer is read-only or writable.
+   "inspect.BufferFlags" provides a convenient way to interpret the
+   flags. The method must return a "memoryview" object.
+
+   **Thread safety:** In *free-threaded* Python, implementations must
+   manage any internal export counter using atomic operations. The
+   method must be safe to call concurrently from multiple threads, and
+   the returned buffer’s underlying data must remain valid until the
+   corresponding "__release_buffer__()" call completes. See Thread
+   safety for memoryview objects for details.
+
+object.__release_buffer__(self, buffer)
+
+   Called when a buffer is no longer needed. The *buffer* argument is
+   a "memoryview" object that was previously returned by
+   "__buffer__()". The method must release any resources associated
+   with the buffer. This method should return "None".
+
+   **Thread safety:** In *free-threaded* Python, any export counter
+   decrement must use atomic operations. Resource cleanup must be
+   thread-safe, as the final release may race with concurrent releases
+   from other threads.
+
+   Buffer objects that do not need to perform any cleanup are not
+   required to implement this method.
+
+Added in version 3.12.
+
+See also:
+
+  **PEP 688** - Making the buffer protocol accessible in Python
+     Introduces the Python "__buffer__" and "__release_buffer__"
+     methods.
+
+  "collections.abc.Buffer"
+     ABC for buffer types.
+
+
+Annotations
+===========
+
+Functions, classes, and modules may contain *annotations*, which are a
+way to associate information (usually *type hints*) with a symbol.
+
+object.__annotations__
+
+   This attribute contains the annotations for an object. It is lazily
+   evaluated, so accessing the attribute may execute arbitrary code
+   and raise exceptions. If evaluation is successful, the attribute is
+   set to a dictionary mapping from variable names to annotations.
+
+   Changed in version 3.14: Annotations are now lazily evaluated.
+
+object.__annotate__(format)
+
+   An *annotate function*. Returns a new dictionary object mapping
+   attribute/parameter names to their annotation values.
+
+   Takes a format parameter specifying the format in which annotations
+   values should be provided. It must be a member of the
+   "annotationlib.Format" enum, or an integer with a value
+   corresponding to a member of the enum.
+
+   If an annotate function doesn’t support the requested format, it
+   must raise "NotImplementedError". Annotate functions must always
+   support "VALUE" format; they must not raise "NotImplementedError()"
+   when called with this format.
+
+   When called with  "VALUE" format, an annotate function may raise
+   "NameError"; it must not raise "NameError" when called requesting
+   any other format.
+
+   If an object does not have any annotations, "__annotate__" should
+   preferably be set to "None" (it can’t be deleted), rather than set
+   to a function that returns an empty dict.
+
+   Added in version 3.14.
+
+See also:
+
+  **PEP 649** — Deferred evaluation of annotation using descriptors
+     Introduces lazy evaluation of annotations and the "__annotate__"
+     function.
+
+
+Special method lookup
+=====================
+
+For custom classes, implicit invocations of special methods are only
+guaranteed to work correctly if defined on an object’s type, not in
+the object’s instance dictionary.  That behaviour is the reason why
+the following code raises an exception:
+
+   >>> class C:
+   ...     pass
+   ...
+   >>> c = C()
+   >>> c.__len__ = lambda: 5
+   >>> len(c)
+   Traceback (most recent call last):
+     File "<stdin>", line 1, in <module>
+   TypeError: object of type 'C' has no len()
+
+The rationale behind this behaviour lies with a number of special
+methods such as "__hash__()" and "__repr__()" that are implemented by
+all objects, including type objects. If the implicit lookup of these
+methods used the conventional lookup process, they would fail when
+invoked on the type object itself:
+
+   >>> 1 .__hash__() == hash(1)
+   True
+   >>> int.__hash__() == hash(int)
+   Traceback (most recent call last):
+     File "<stdin>", line 1, in <module>
+   TypeError: descriptor '__hash__' of 'int' object needs an argument
+
+Incorrectly attempting to invoke an unbound method of a class in this
+way is sometimes referred to as ‘metaclass confusion’, and is avoided
+by bypassing the instance when looking up special methods:
+
+   >>> type(1).__hash__(1) == hash(1)
+   True
+   >>> type(int).__hash__(int) == hash(int)
+   True
+
+In addition to bypassing any instance attributes in the interest of
+correctness, implicit special method lookup generally also bypasses
+the "__getattribute__()" method even of the object’s metaclass:
+
+   >>> class Meta(type):
+   ...     def __getattribute__(*args):
+   ...         print("Metaclass getattribute invoked")
+   ...         return type.__getattribute__(*args)
+   ...
+   >>> class C(object, metaclass=Meta):
+   ...     def __len__(self):
+   ...         return 10
+   ...     def __getattribute__(*args):
+   ...         print("Class getattribute invoked")
+   ...         return object.__getattribute__(*args)
+   ...
+   >>> c = C()
+   >>> c.__len__()                 # Explicit lookup via instance
+   Class getattribute invoked
+   10
+   >>> type(c).__len__(c)          # Explicit lookup via type
+   Metaclass getattribute invoked
+   10
+   >>> len(c)                      # Implicit lookup
+   10
+
+Bypassing the "__getattribute__()" machinery in this fashion provides
+significant scope for speed optimisations within the interpreter, at
+the cost of some flexibility in the handling of special methods (the
+special method *must* be set on the class object itself in order to be
+consistently invoked by the interpreter).
+''',
+    'string-methods': r'''String Methods
+**************
+
+Strings implement all of the common sequence operations, along with
+the additional methods described below.
+
+Strings also support two styles of string formatting, one providing a
+large degree of flexibility and customization (see "str.format()",
+Format string syntax and Custom string formatting) and the other based
+on C "printf" style formatting that handles a narrower range of types
+and is slightly harder to use correctly, but is often faster for the
+cases it can handle (printf-style String Formatting).
+
+The Text Processing Services section of the standard library covers a
+number of other modules that provide various text related utilities
+(including regular expression support in the "re" module).
+
+str.capitalize()
+
+   Return a copy of the string with its first character capitalized
+   and the rest lowercased.
+
+   Changed in version 3.8: The first character is now put into
+   titlecase rather than uppercase. This means that characters like
+   digraphs will only have their first letter capitalized, instead of
+   the full character.
+
+str.casefold()
+
+   Return a casefolded copy of the string. Casefolded strings may be
+   used for caseless matching.
+
+   Casefolding is similar to lowercasing but more aggressive because
+   it is intended to remove all case distinctions in a string. For
+   example, the German lowercase letter "'ß'" is equivalent to ""ss"".
+   Since it is already lowercase, "lower()" would do nothing to "'ß'";
+   "casefold()" converts it to ""ss"". For example:
+
+      >>> 'straße'.lower()
+      'straße'
+      >>> 'straße'.casefold()
+      'strasse'
+
+   The casefolding algorithm is described in section 3.13 ‘Default
+   Case Folding’ of the Unicode Standard.
+
+   Added in version 3.3.
+
+str.center(width, fillchar=' ', /)
+
+   Return centered in a string of length *width*. Padding is done
+   using the specified *fillchar* (default is an ASCII space). The
+   original string is returned if *width* is less than or equal to
+   "len(s)".  For example:
+
+      >>> 'Python'.center(10)
+      '  Python  '
+      >>> 'Python'.center(10, '-')
+      '--Python--'
+      >>> 'Python'.center(4)
+      'Python'
+
+str.count(sub[, start[, end]])
+
+   Return the number of non-overlapping occurrences of substring *sub*
+   in the range [*start*, *end*].  Optional arguments *start* and
+   *end* are interpreted as in slice notation.
+
+   If *sub* is empty, returns the number of empty strings between
+   characters which is the length of the string plus one. For example:
+
+      >>> 'spam, spam, spam'.count('spam')
+      3
+      >>> 'spam, spam, spam'.count('spam', 5)
+      2
+      >>> 'spam, spam, spam'.count('spam', 5, 10)
+      1
+      >>> 'spam, spam, spam'.count('eggs')
+      0
+      >>> 'spam, spam, spam'.count('')
+      17
+
+str.encode(encoding='utf-8', errors='strict')
+
+   Return the string encoded to "bytes".
+
+   *encoding* defaults to "'utf-8'"; see Standard Encodings for
+   possible values.
+
+   *errors* controls how encoding errors are handled. If "'strict'"
+   (the default), a "UnicodeError" exception is raised. Other possible
+   values are "'ignore'", "'replace'", "'xmlcharrefreplace'",
+   "'backslashreplace'" and any other name registered via
+   "codecs.register_error()". See Error Handlers for details.
+
+   For performance reasons, the value of *errors* is not checked for
+   validity unless an encoding error actually occurs, Python
+   Development Mode is enabled or a debug build is used. For example:
+
+      >>> encoded_str_to_bytes = 'Python'.encode()
+      >>> type(encoded_str_to_bytes)
+      <class 'bytes'>
+      >>> encoded_str_to_bytes
+      b'Python'
+
+   Changed in version 3.1: Added support for keyword arguments.
+
+   Changed in version 3.9: The value of the *errors* argument is now
+   checked in Python Development Mode and in debug mode.
+
+str.endswith(suffix[, start[, end]])
+
+   Return "True" if the string ends with the specified *suffix*,
+   otherwise return "False".  *suffix* can also be a tuple of suffixes
+   to look for.  With optional *start*, test beginning at that
+   position.  With optional *end*, stop comparing at that position.
+   Using *start* and *end* is equivalent to
+   "str[start:end].endswith(suffix)". For example:
+
+      >>> 'Python'.endswith('on')
+      True
+      >>> 'a tuple of suffixes'.endswith(('at', 'in'))
+      False
+      >>> 'a tuple of suffixes'.endswith(('at', 'es'))
+      True
+      >>> 'Python is amazing'.endswith('is', 0, 9)
+      True
+
+   See also "startswith()" and "removesuffix()".
+
+str.expandtabs(tabsize=8)
+
+   Return a copy of the string where all tab characters are replaced
+   by one or more spaces, depending on the current column and the
+   given tab size.  Tab positions occur every *tabsize* characters
+   (default is 8, giving tab positions at columns 0, 8, 16 and so on).
+   To expand the string, the current column is set to zero and the
+   string is examined character by character.  If the character is a
+   tab ("\t"), one or more space characters are inserted in the result
+   until the current column is equal to the next tab position. (The
+   tab character itself is not copied.)  If the character is a newline
+   ("\n") or return ("\r"), it is copied and the current column is
+   reset to zero.  Any other character is copied unchanged and the
+   current column is incremented by one regardless of how the
+   character is represented when printed. For example:
+
+      >>> '01\t012\t0123\t01234'.expandtabs()
+      '01      012     0123    01234'
+      >>> '01\t012\t0123\t01234'.expandtabs(4)
+      '01  012 0123    01234'
+      >>> print('01\t012\n0123\t01234'.expandtabs(4))
+      01  012
+      0123    01234
+
+str.find(sub[, start[, end]])
+
+   Return the lowest index in the string where substring *sub* is
+   found within the slice "s[start:end]".  Optional arguments *start*
+   and *end* are interpreted as in slice notation.  Return "-1" if
+   *sub* is not found. For example:
+
+      >>> 'spam, spam, spam'.find('sp')
+      0
+      >>> 'spam, spam, spam'.find('sp', 5)
+      6
+
+   See also "rfind()" and "index()".
+
+   Note:
+
+     The "find()" method should be used only if you need to know the
+     position of *sub*.  To check if *sub* is a substring or not, use
+     the "in" operator:
+
+        >>> 'Py' in 'Python'
+        True
+
+str.format(*args, **kwargs)
+
+   Perform a string formatting operation.  The string on which this
+   method is called can contain literal text or replacement fields
+   delimited by braces "{}".  Each replacement field contains either
+   the numeric index of a positional argument, or the name of a
+   keyword argument.  Returns a copy of the string where each
+   replacement field is replaced with the string value of the
+   corresponding argument. For example:
+
+      >>> "The sum of 1 + 2 is {0}".format(1+2)
+      'The sum of 1 + 2 is 3'
+      >>> "The sum of {a} + {b} is {answer}".format(answer=1+2, a=1, b=2)
+      'The sum of 1 + 2 is 3'
+      >>> "{1} expects the {0} Inquisition!".format("Spanish", "Nobody")
+      'Nobody expects the Spanish Inquisition!'
+
+   See Format string syntax for a description of the various
+   formatting options that can be specified in format strings.
+
+   Note:
+
+     When formatting a number ("int", "float", "complex",
+     "decimal.Decimal" and subclasses) with the "n" type (ex:
+     "'{:n}'.format(1234)"), the function temporarily sets the
+     "LC_CTYPE" locale to the "LC_NUMERIC" locale to decode
+     "decimal_point" and "thousands_sep" fields of "localeconv()" if
+     they are non-ASCII or longer than 1 byte, and the "LC_NUMERIC"
+     locale is different than the "LC_CTYPE" locale.  This temporary
+     change affects other threads.
+
+   Changed in version 3.7: When formatting a number with the "n" type,
+   the function sets temporarily the "LC_CTYPE" locale to the
+   "LC_NUMERIC" locale in some cases.
+
+str.format_map(mapping, /)
+
+   Similar to "str.format(**mapping)", except that "mapping" is used
+   directly and not copied to a "dict".  This is useful if for example
+   "mapping" is a dict subclass:
+
+   >>> class Default(dict):
+   ...     def __missing__(self, key):
+   ...         return key
+   ...
+   >>> '{name} was born in {country}'.format_map(Default(name='Guido'))
+   'Guido was born in country'
+
+   Added in version 3.2.
+
+str.index(sub[, start[, end]])
+
+   Like "find()", but raise "ValueError" when the substring is not
+   found. For example:
+
+      >>> 'spam, spam, spam'.index('spam')
+      0
+      >>> 'spam, spam, spam'.index('eggs')
+      Traceback (most recent call last):
+        File "<python-input-0>", line 1, in <module>
+          'spam, spam, spam'.index('eggs')
+          ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^
+      ValueError: substring not found
+
+   See also "rindex()".
+
+str.isalnum()
+
+   Return "True" if all characters in the string are alphanumeric and
+   there is at least one character, "False" otherwise.  A character
+   "c" is alphanumeric if one of the following returns "True":
+   "c.isalpha()", "c.isdecimal()", "c.isdigit()", or "c.isnumeric()".
+   For example:
+
+      >>> 'abc123'.isalnum()
+      True
+      >>> 'abc123!@#'.isalnum()
+      False
+      >>> ''.isalnum()
+      False
+      >>> ' '.isalnum()
+      False
+
+str.isalpha()
+
+   Return "True" if all characters in the string are alphabetic and
+   there is at least one character, "False" otherwise.  Alphabetic
+   characters are those characters defined in the Unicode character
+   database as “Letter”, i.e., those with general category property
+   being one of “Lm”, “Lt”, “Lu”, “Ll”, or “Lo”.  Note that this is
+   different from the Alphabetic property defined in the section 4.10
+   ‘Letters, Alphabetic, and Ideographic’ of the Unicode Standard. For
+   example:
+
+      >>> 'Letters and spaces'.isalpha()
+      False
+      >>> 'LettersOnly'.isalpha()
+      True
+      >>> 'µ'.isalpha()  # non-ASCII characters can be considered alphabetical too
+      True
+
+   See Unicode Properties.
+
+str.isascii()
+
+   Return "True" if the string is empty or all characters in the
+   string are ASCII, "False" otherwise. ASCII characters have code
+   points in the range U+0000-U+007F. For example:
+
+      >>> 'ASCII characters'.isascii()
+      True
+      >>> 'µ'.isascii()
+      False
+
+   Added in version 3.7.
+
+str.isdecimal()
+
+   Return "True" if all characters in the string are decimal
+   characters and there is at least one character, "False" otherwise.
+   Decimal characters are those that can be used to form numbers in
+   base 10, such as U+0660, ARABIC-INDIC DIGIT ZERO.  Formally a
+   decimal character is a character in the Unicode General Category
+   “Nd”. For example:
+
+      >>> '0123456789'.isdecimal()
+      True
+      >>> '٠١٢٣٤٥٦٧٨٩'.isdecimal()  # Arabic-Indic digits zero to nine
+      True
+      >>> 'alphabetic'.isdecimal()
+      False
+
+str.isdigit()
+
+   Return "True" if all characters in the string are digits and there
+   is at least one character, "False" otherwise.  Digits include
+   decimal characters and digits that need special handling, such as
+   the compatibility superscript digits. This covers digits which
+   cannot be used to form numbers in base 10, like the Kharosthi
+   numbers.  Formally, a digit is a character that has the property
+   value Numeric_Type=Digit or Numeric_Type=Decimal.
+
+str.isidentifier()
+
+   Return "True" if the string is a valid identifier according to the
+   language definition, section Names (identifiers and keywords).
+
+   "keyword.iskeyword()" can be used to test whether string "s" is a
+   reserved identifier, such as "def" and "class".
+
+   Example:
+
+      >>> from keyword import iskeyword
+
+      >>> 'hello'.isidentifier(), iskeyword('hello')
+      (True, False)
+      >>> 'def'.isidentifier(), iskeyword('def')
+      (True, True)
+
+str.islower()
+
+   Return "True" if all cased characters [4] in the string are
+   lowercase and there is at least one cased character, "False"
+   otherwise.
+
+str.isnumeric()
+
+   Return "True" if all characters in the string are numeric
+   characters, and there is at least one character, "False" otherwise.
+   Numeric characters include digit characters, and all characters
+   that have the Unicode numeric value property, e.g. U+2155, VULGAR
+   FRACTION ONE FIFTH.  Formally, numeric characters are those with
+   the property value Numeric_Type=Digit, Numeric_Type=Decimal or
+   Numeric_Type=Numeric. For example:
+
+      >>> '0123456789'.isnumeric()
+      True
+      >>> '٠١٢٣٤٥٦٧٨٩'.isnumeric()  # Arabic-indic digit zero to nine
+      True
+      >>> '⅕'.isnumeric()  # Vulgar fraction one fifth
+      True
+      >>> '²'.isdecimal(), '²'.isdigit(),  '²'.isnumeric()
+      (False, True, True)
+
+   See also "isdecimal()" and "isdigit()". Numeric characters are a
+   superset of decimal numbers.
+
+str.isprintable()
+
+   Return "True" if all characters in the string are printable,
+   "False" if it contains at least one non-printable character.
+
+   Here “printable” means the character is suitable for "repr()" to
+   use in its output; “non-printable” means that "repr()" on built-in
+   types will hex-escape the character.  It has no bearing on the
+   handling of strings written to "sys.stdout" or "sys.stderr".
+
+   The printable characters are those which in the Unicode character
+   database (see "unicodedata") have a general category in group
+   Letter, Mark, Number, Punctuation, or Symbol (L, M, N, P, or S);
+   plus the ASCII space 0x20. Nonprintable characters are those in
+   group Separator or Other (Z or C), except the ASCII space.
+
+   For example:
+
+      >>> ''.isprintable(), ' '.isprintable()
+      (True, True)
+      >>> '\t'.isprintable(), '\n'.isprintable()
+      (False, False)
+
+   See also "isspace()".
+
+str.isspace()
+
+   Return "True" if there are only whitespace characters in the string
+   and there is at least one character, "False" otherwise.
+
+   For example:
+
+      >>> ''.isspace()
+      False
+      >>> ' '.isspace()
+      True
+      >>> '\t\n'.isspace() # TAB and BREAK LINE
+      True
+      >>> '\u3000'.isspace() # IDEOGRAPHIC SPACE
+      True
+
+   A character is *whitespace* if in the Unicode character database
+   (see "unicodedata"), either its general category is "Zs"
+   (“Separator, space”), or its bidirectional class is one of "WS",
+   "B", or "S".
+
+   See also "isprintable()".
+
+str.istitle()
+
+   Return "True" if the string is a titlecased string and there is at
+   least one character, for example uppercase characters may only
+   follow uncased characters and lowercase characters only cased ones.
+   Return "False" otherwise.
+
+   For example:
+
+      >>> 'Spam, Spam, Spam'.istitle()
+      True
+      >>> 'spam, spam, spam'.istitle()
+      False
+      >>> 'SPAM, SPAM, SPAM'.istitle()
+      False
+
+   See also "title()".
+
+str.isupper()
+
+   Return "True" if all cased characters [4] in the string are
+   uppercase and there is at least one cased character, "False"
+   otherwise.
+
+   >>> 'BANANA'.isupper()
+   True
+   >>> 'banana'.isupper()
+   False
+   >>> 'baNana'.isupper()
+   False
+   >>> ' '.isupper()
+   False
+
+str.join(iterable, /)
+
+   Return a string which is the concatenation of the strings in
+   *iterable*. A "TypeError" will be raised if there are any non-
+   string values in *iterable*, including "bytes" objects.  The
+   separator between elements is the string providing this method. For
+   example:
+
+      >>> ', '.join(['spam', 'spam', 'spam'])
+      'spam, spam, spam'
+      >>> '-'.join('Python')
+      'P-y-t-h-o-n'
+
+   See also "split()".
+
+str.ljust(width, fillchar=' ', /)
+
+   Return the string left justified in a string of length *width*.
+   Padding is done using the specified *fillchar* (default is an ASCII
+   space). The original string is returned if *width* is less than or
+   equal to "len(s)".
+
+   For example:
+
+      >>> 'Python'.ljust(10)
+      'Python    '
+      >>> 'Python'.ljust(10, '.')
+      'Python....'
+      >>> 'Monty Python'.ljust(10, '.')
+      'Monty Python'
+
+   See also "rjust()".
+
+str.lower()
+
+   Return a copy of the string with all the cased characters [4]
+   converted to lowercase. For example:
+
+      >>> 'Lower Method Example'.lower()
+      'lower method example'
+
+   The lowercasing algorithm used is described in section 3.13
+   ‘Default Case Folding’ of the Unicode Standard.
+
+str.lstrip(chars=None, /)
+
+   Return a copy of the string with leading characters removed.  The
+   *chars* argument is a string specifying the set of characters to be
+   removed.  If omitted or "None", the *chars* argument defaults to
+   removing whitespace.  The *chars* argument is not a prefix; rather,
+   all combinations of its values are stripped:
+
+      >>> '   spacious   '.lstrip()
+      'spacious   '
+      >>> 'www.example.com'.lstrip('cmowz.')
+      'example.com'
+
+   See "str.removeprefix()" for a method that will remove a single
+   prefix string rather than all of a set of characters.  For example:
+
+      >>> 'Arthur: three!'.lstrip('Arthur: ')
+      'ee!'
+      >>> 'Arthur: three!'.removeprefix('Arthur: ')
+      'three!'
+
+static str.maketrans(dict, /)
+static str.maketrans(from, to, remove='', /)
+
+   This static method returns a translation table usable for
+   "str.translate()".
+
+   If there is only one argument, it must be a dictionary mapping
+   Unicode ordinals (integers) or characters (strings of length 1) to
+   Unicode ordinals, strings (of arbitrary lengths) or "None".
+   Character keys will then be converted to ordinals.
+
+   If there are two arguments, they must be strings of equal length,
+   and in the resulting dictionary, each character in *from* will be
+   mapped to the character at the same position in *to*.  If there is
+   a third argument, it must be a string, whose characters will be
+   mapped to "None" in the result.
+
+str.partition(sep, /)
+
+   Split the string at the first occurrence of *sep*, and return a
+   3-tuple containing the part before the separator, the separator
+   itself, and the part after the separator.  If the separator is not
+   found, return a 3-tuple containing the string itself, followed by
+   two empty strings.
+
+   For example:
+
+      >>> 'Monty Python'.partition(' ')
+      ('Monty', ' ', 'Python')
+      >>> "Monty Python's Flying Circus".partition(' ')
+      ('Monty', ' ', "Python's Flying Circus")
+      >>> 'Monty Python'.partition('-')
+      ('Monty Python', '', '')
+
+   See also "rpartition()".
+
+str.removeprefix(prefix, /)
+
+   If the string starts with the *prefix* string, return
+   "string[len(prefix):]". Otherwise, return a copy of the original
+   string:
+
+      >>> 'TestHook'.removeprefix('Test')
+      'Hook'
+      >>> 'BaseTestCase'.removeprefix('Test')
+      'BaseTestCase'
+
+   Added in version 3.9.
+
+   See also "removesuffix()" and "startswith()".
+
+str.removesuffix(suffix, /)
+
+   If the string ends with the *suffix* string and that *suffix* is
+   not empty, return "string[:-len(suffix)]". Otherwise, return a copy
+   of the original string:
+
+      >>> 'MiscTests'.removesuffix('Tests')
+      'Misc'
+      >>> 'TmpDirMixin'.removesuffix('Tests')
+      'TmpDirMixin'
+
+   Added in version 3.9.
+
+   See also "removeprefix()" and "endswith()".
+
+str.replace(old, new, /, count=-1)
+
+   Return a copy of the string with all occurrences of substring *old*
+   replaced by *new*.  If *count* is given, only the first *count*
+   occurrences are replaced. If *count* is not specified or "-1", then
+   all occurrences are replaced. For example:
+
+      >>> 'spam, spam, spam'.replace('spam', 'eggs')
+      'eggs, eggs, eggs'
+      >>> 'spam, spam, spam'.replace('spam', 'eggs', 1)
+      'eggs, spam, spam'
+
+   Changed in version 3.13: *count* is now supported as a keyword
+   argument.
+
+str.rfind(sub[, start[, end]])
+
+   Return the highest index in the string where substring *sub* is
+   found, such that *sub* is contained within "s[start:end]".
+   Optional arguments *start* and *end* are interpreted as in slice
+   notation.  Return "-1" on failure. For example:
+
+      >>> 'spam, spam, spam'.rfind('sp')
+      12
+      >>> 'spam, spam, spam'.rfind('sp', 0, 10)
+      6
+
+   See also "find()" and "rindex()".
+
+str.rindex(sub[, start[, end]])
+
+   Like "rfind()" but raises "ValueError" when the substring *sub* is
+   not found. For example:
+
+      >>> 'spam, spam, spam'.rindex('spam')
+      12
+      >>> 'spam, spam, spam'.rindex('eggs')
+      Traceback (most recent call last):
+        File "<stdin-0>", line 1, in <module>
+          'spam, spam, spam'.rindex('eggs')
+          ~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^
+      ValueError: substring not found
+
+   See also "index()" and "find()".
+
+str.rjust(width, fillchar=' ', /)
+
+   Return the string right justified in a string of length *width*.
+   Padding is done using the specified *fillchar* (default is an ASCII
+   space). The original string is returned if *width* is less than or
+   equal to "len(s)".
+
+   For example:
+
+      >>> 'Python'.rjust(10)
+      '    Python'
+      >>> 'Python'.rjust(10, '.')
+      '....Python'
+      >>> 'Monty Python'.rjust(10, '.')
+      'Monty Python'
+
+   See also "ljust()" and "zfill()".
+
+str.rpartition(sep, /)
+
+   Split the string at the last occurrence of *sep*, and return a
+   3-tuple containing the part before the separator, the separator
+   itself, and the part after the separator.  If the separator is not
+   found, return a 3-tuple containing two empty strings, followed by
+   the string itself.
+
+   For example:
+
+      >>> 'Monty Python'.rpartition(' ')
+      ('Monty', ' ', 'Python')
+      >>> "Monty Python's Flying Circus".rpartition(' ')
+      ("Monty Python's Flying", ' ', 'Circus')
+      >>> 'Monty Python'.rpartition('-')
+      ('', '', 'Monty Python')
+
+   See also "partition()".
+
+str.rsplit(sep=None, maxsplit=-1)
+
+   Return a list of the words in the string, using *sep* as the
+   delimiter string. If *maxsplit* is given, at most *maxsplit* splits
+   are done, the *rightmost* ones.  If *sep* is not specified or
+   "None", any whitespace string is a separator.  Except for splitting
+   from the right, "rsplit()" behaves like "split()" which is
+   described in detail below.
+
+str.rstrip(chars=None, /)
+
+   Return a copy of the string with trailing characters removed.  The
+   *chars* argument is a string specifying the set of characters to be
+   removed.  If omitted or "None", the *chars* argument defaults to
+   removing whitespace.  The *chars* argument is not a suffix; rather,
+   all combinations of its values are stripped. For example:
+
+      >>> '   spacious   '.rstrip()
+      '   spacious'
+      >>> 'mississippi'.rstrip('ipz')
+      'mississ'
+
+   See "removesuffix()" for a method that will remove a single suffix
+   string rather than all of a set of characters.  For example:
+
+      >>> 'Monty Python'.rstrip(' Python')
+      'M'
+      >>> 'Monty Python'.removesuffix(' Python')
+      'Monty'
+
+   See also "strip()".
+
+str.split(sep=None, maxsplit=-1)
+
+   Return a list of the words in the string, using *sep* as the
+   delimiter string.  If *maxsplit* is given, at most *maxsplit*
+   splits are done (thus, the list will have at most "maxsplit+1"
+   elements).  If *maxsplit* is not specified or "-1", then there is
+   no limit on the number of splits (all possible splits are made).
+
+   If *sep* is given, consecutive delimiters are not grouped together
+   and are deemed to delimit empty strings (for example,
+   "'1,,2'.split(',')" returns "['1', '', '2']").  The *sep* argument
+   may consist of multiple characters as a single delimiter (to split
+   with multiple delimiters, use "re.split()"). Splitting an empty
+   string with a specified separator returns "['']".
+
+   For example:
+
+      >>> '1,2,3'.split(',')
+      ['1', '2', '3']
+      >>> '1,2,3'.split(',', maxsplit=1)
+      ['1', '2,3']
+      >>> '1,2,,3,'.split(',')
+      ['1', '2', '', '3', '']
+      >>> '1<>2<>3<4'.split('<>')
+      ['1', '2', '3<4']
+
+   If *sep* is not specified or is "None", a different splitting
+   algorithm is applied: runs of consecutive whitespace are regarded
+   as a single separator, and the result will contain no empty strings
+   at the start or end if the string has leading or trailing
+   whitespace.  Consequently, splitting an empty string or a string
+   consisting of just whitespace with a "None" separator returns "[]".
+
+   For example:
+
+      >>> '1 2 3'.split()
+      ['1', '2', '3']
+      >>> '1 2 3'.split(maxsplit=1)
+      ['1', '2 3']
+      >>> '   1   2   3   '.split()
+      ['1', '2', '3']
+
+   If *sep* is not specified or is "None" and  *maxsplit* is "0", only
+   leading runs of consecutive whitespace are considered.
+
+   For example:
+
+      >>> "".split(None, 0)
+      []
+      >>> "   ".split(None, 0)
+      []
+      >>> "   foo   ".split(maxsplit=0)
+      ['foo   ']
+
+   See also "join()".
+
+str.splitlines(keepends=False)
+
+   Return a list of the lines in the string, breaking at line
+   boundaries.  Line breaks are not included in the resulting list
+   unless *keepends* is given and true.
+
+   This method splits on the following line boundaries.  In
+   particular, the boundaries are a superset of *universal newlines*.
+
+   +-------------------------+-------------------------------+
+   | Representation          | Description                   |
+   |=========================|===============================|
+   | "\n"                    | Line Feed                     |
+   +-------------------------+-------------------------------+
+   | "\r"                    | Carriage Return               |
+   +-------------------------+-------------------------------+
+   | "\r\n"                  | Carriage Return + Line Feed   |
+   +-------------------------+-------------------------------+
+   | "\v" or "\x0b"          | Line Tabulation               |
+   +-------------------------+-------------------------------+
+   | "\f" or "\x0c"          | Form Feed                     |
+   +-------------------------+-------------------------------+
+   | "\x1c"                  | File Separator                |
+   +-------------------------+-------------------------------+
+   | "\x1d"                  | Group Separator               |
+   +-------------------------+-------------------------------+
+   | "\x1e"                  | Record Separator              |
+   +-------------------------+-------------------------------+
+   | "\x85"                  | Next Line (C1 Control Code)   |
+   +-------------------------+-------------------------------+
+   | "\u2028"                | Line Separator                |
+   +-------------------------+-------------------------------+
+   | "\u2029"                | Paragraph Separator           |
+   +-------------------------+-------------------------------+
+
+   Changed in version 3.2: "\v" and "\f" added to list of line
+   boundaries.
+
+   For example:
+
+      >>> 'ab c\n\nde fg\rkl\r\n'.splitlines()
+      ['ab c', '', 'de fg', 'kl']
+      >>> 'ab c\n\nde fg\rkl\r\n'.splitlines(keepends=True)
+      ['ab c\n', '\n', 'de fg\r', 'kl\r\n']
+
+   Unlike "split()" when a delimiter string *sep* is given, this
+   method returns an empty list for the empty string, and a terminal
+   line break does not result in an extra line:
+
+      >>> "".splitlines()
+      []
+      >>> "One line\n".splitlines()
+      ['One line']
+
+   For comparison, "split('\n')" gives:
+
+      >>> ''.split('\n')
+      ['']
+      >>> 'Two lines\n'.split('\n')
+      ['Two lines', '']
+
+str.startswith(prefix[, start[, end]])
+
+   Return "True" if string starts with the *prefix*, otherwise return
+   "False". *prefix* can also be a tuple of prefixes to look for.
+   With optional *start*, test string beginning at that position.
+   With optional *end*, stop comparing string at that position.
+
+   For example:
+
+      >>> 'Python'.startswith('Py')
+      True
+      >>> 'a tuple of prefixes'.startswith(('at', 'a'))
+      True
+      >>> 'Python is amazing'.startswith('is', 7)
+      True
+
+   See also "endswith()" and "removeprefix()".
+
+str.strip(chars=None, /)
+
+   Return a copy of the string with the leading and trailing
+   characters removed. The *chars* argument is a string specifying the
+   set of characters to be removed. If omitted or "None", the *chars*
+   argument defaults to removing whitespace. The *chars* argument is
+   not a prefix or suffix; rather, all combinations of its values are
+   stripped.
+
+   For example:
+
+      >>> '   spacious   '.strip()
+      'spacious'
+      >>> 'www.example.com'.strip('cmowz.')
+      'example'
+
+   The outermost leading and trailing *chars* argument values are
+   stripped from the string. Characters are removed from the leading
+   end until reaching a string character that is not contained in the
+   set of characters in *chars*. A similar action takes place on the
+   trailing end.
+
+   For example:
+
+      >>> comment_string = '#....... Section 3.2.1 Issue #32 .......'
+      >>> comment_string.strip('.#! ')
+      'Section 3.2.1 Issue #32'
+
+   See also "rstrip()".
+
+str.swapcase()
+
+   Return a copy of the string with uppercase characters converted to
+   lowercase and vice versa. Note that it is not necessarily true that
+   "s.swapcase().swapcase() == s".
+
+str.title()
+
+   Return a titlecased version of the string where words start with an
+   uppercase character and the remaining characters are lowercase.
+
+   For example:
+
+      >>> 'Hello world'.title()
+      'Hello World'
+
+   The algorithm uses a simple language-independent definition of a
+   word as groups of consecutive letters.  The definition works in
+   many contexts but it means that apostrophes in contractions and
+   possessives form word boundaries, which may not be the desired
+   result:
+
+      >>> "they're bill's friends from the UK".title()
+      "They'Re Bill'S Friends From The Uk"
+
+   The "string.capwords()" function does not have this problem, as it
+   splits words on spaces only.
+
+   Alternatively, a workaround for apostrophes can be constructed
+   using regular expressions:
+
+      >>> import re
+      >>> def titlecase(s):
+      ...     return re.sub(r"[A-Za-z]+('[A-Za-z]+)?",
+      ...                   lambda mo: mo.group(0).capitalize(),
+      ...                   s)
+      ...
+      >>> titlecase("they're bill's friends.")
+      "They're Bill's Friends."
+
+   See also "istitle()".
+
+str.translate(table, /)
+
+   Return a copy of the string in which each character has been mapped
+   through the given translation table.  The table must be an object
+   that implements indexing via "__getitem__()", typically a *mapping*
+   or *sequence*.  When indexed by a Unicode ordinal (an integer), the
+   table object can do any of the following: return a Unicode ordinal
+   or a string, to map the character to one or more other characters;
+   return "None", to delete the character from the return string; or
+   raise a "LookupError" exception, to map the character to itself.
+
+   You can use "str.maketrans()" to create a translation map from
+   character-to-character mappings in different formats.
+
+   See also the "codecs" module for a more flexible approach to custom
+   character mappings.
+
+str.upper()
+
+   Return a copy of the string with all the cased characters [4]
+   converted to uppercase.  Note that "s.upper().isupper()" might be
+   "False" if "s" contains uncased characters or if the Unicode
+   category of the resulting character(s) is not “Lu” (Letter,
+   uppercase), but e.g. “Lt” (Letter, titlecase).
+
+   The uppercasing algorithm used is described in section 3.13
+   ‘Default Case Folding’ of the Unicode Standard.
+
+str.zfill(width, /)
+
+   Return a copy of the string left filled with ASCII "'0'" digits to
+   make a string of length *width*. A leading sign prefix
+   ("'+'"/"'-'") is handled by inserting the padding *after* the sign
+   character rather than before. The original string is returned if
+   *width* is less than or equal to "len(s)".
+
+   For example:
+
+      >>> "42".zfill(5)
+      '00042'
+      >>> "-42".zfill(5)
+      '-0042'
+
+   See also "rjust()".
+''',
+    'strings': '''String and Bytes literals
+*************************
+
+String literals are text enclosed in single quotes ("'") or double
+quotes ("""). For example:
+
+   "spam"
+   'eggs'
+
+The quote used to start the literal also terminates it, so a string
+literal can only contain the other quote (except with escape
+sequences, see below). For example:
+
+   'Say "Hello", please.'
+   "Don't do that!"
+
+Except for this limitation, the choice of quote character ("'" or """)
+does not affect how the literal is parsed.
+
+Inside a string literal, the backslash ("\\") character introduces an
+*escape sequence*, which has special meaning depending on the
+character after the backslash. For example, "\\"" denotes the double
+quote character, and does *not* end the string:
+
+   >>> print("Say \\"Hello\\" to everyone!")
+   Say "Hello" to everyone!
+
+See escape sequences below for a full list of such sequences, and more
+details.
+
+
+Triple-quoted strings
+=====================
+
+Strings can also be enclosed in matching groups of three single or
+double quotes. These are generally referred to as *triple-quoted
+strings*:
+
+   """This is a triple-quoted string."""
+
+In triple-quoted literals, unescaped quotes are allowed (and are
+retained), except that three unescaped quotes in a row terminate the
+literal, if they are of the same kind ("'" or """) used at the start:
+
+   """This string has "quotes" inside."""
+
+Unescaped newlines are also allowed and retained:
+
+   \'\'\'This triple-quoted string
+   continues on the next line.\'\'\'
+
+
+String prefixes
+===============
+
+String literals can have an optional *prefix* that influences how the
+content of the literal is parsed, for example:
+
+   b"data"
+   f'{result=}'
+
+The allowed prefixes are:
+
+* "b": Bytes literal
+
+* "r": Raw string
+
+* "f": Formatted string literal (“f-string”)
+
+* "t": Template string literal (“t-string”)
+
+* "u": No effect (allowed for backwards compatibility)
+
+See the linked sections for details on each type.
+
+Prefixes are case-insensitive (for example, ‘"B"’ works the same as
+‘"b"’). The ‘"r"’ prefix can be combined with ‘"f"’, ‘"t"’ or ‘"b"’,
+so ‘"fr"’, ‘"rf"’, ‘"tr"’, ‘"rt"’, ‘"br"’, and ‘"rb"’ are also valid
+prefixes.
+
+Added in version 3.3: The "'rb'" prefix of raw bytes literals has been
+added as a synonym of "'br'".Support for the unicode legacy literal
+("u'value'") was reintroduced to simplify the maintenance of dual
+Python 2.x and 3.x codebases. See **PEP 414** for more information.
+
+
+Formal grammar
+==============
+
+String literals, except “f-strings” and “t-strings”, are described by
+the following lexical definitions.
+
+These definitions use negative lookaheads ("!") to indicate that an
+ending quote ends the literal.
+
+   STRING:          [stringprefix] (stringcontent)
+   stringprefix:    <("r" | "u" | "b" | "br" | "rb"), case-insensitive>
+   stringcontent:
+      | "\'\'\'" ( !"\'\'\'" longstringitem)* "\'\'\'"
+      | '"""' ( !'"""' longstringitem)* '"""'
+      | "'" ( !"'" stringitem)* "'"
+      | '"' ( !'"' stringitem)* '"'
+   stringitem:      stringchar | stringescapeseq
+   stringchar:      <any source_character, except backslash and newline>
+   longstringitem:  stringitem | newline
+   stringescapeseq: "\\" <any source_character>
+
+Note that as in all lexical definitions, whitespace is significant. In
+particular, the prefix (if any) must be immediately followed by the
+starting quote.
+
+
+Escape sequences
+================
+
+Unless an ‘"r"’ or ‘"R"’ prefix is present, escape sequences in string
+and bytes literals are interpreted according to rules similar to those
+used by Standard C.  The recognized escape sequences are:
+
++----------------------------------------------------+----------------------------------------------------+
+| Escape Sequence                                    | Meaning                                            |
+|====================================================|====================================================|
+| "\\"<newline>                                       | Ignored end of line                                |
++----------------------------------------------------+----------------------------------------------------+
+| "\\\\"                                               | Backslash                                          |
++----------------------------------------------------+----------------------------------------------------+
+| "\\'"                                               | Single quote                                       |
++----------------------------------------------------+----------------------------------------------------+
+| "\\""                                               | Double quote                                       |
++----------------------------------------------------+----------------------------------------------------+
+| "\\a"                                               | ASCII Bell (BEL)                                   |
++----------------------------------------------------+----------------------------------------------------+
+| "\\b"                                               | ASCII Backspace (BS)                               |
++----------------------------------------------------+----------------------------------------------------+
+| "\\f"                                               | ASCII Formfeed (FF)                                |
++----------------------------------------------------+----------------------------------------------------+
+| "\\n"                                               | ASCII Linefeed (LF)                                |
++----------------------------------------------------+----------------------------------------------------+
+| "\\r"                                               | ASCII Carriage Return (CR)                         |
++----------------------------------------------------+----------------------------------------------------+
+| "\\t"                                               | ASCII Horizontal Tab (TAB)                         |
++----------------------------------------------------+----------------------------------------------------+
+| "\\v"                                               | ASCII Vertical Tab (VT)                            |
++----------------------------------------------------+----------------------------------------------------+
+| "\\*ooo*"                                           | Octal character                                    |
++----------------------------------------------------+----------------------------------------------------+
+| "\\x*hh*"                                           | Hexadecimal character                              |
++----------------------------------------------------+----------------------------------------------------+
+| "\\N{*name*}"                                       | Named Unicode character                            |
++----------------------------------------------------+----------------------------------------------------+
+| "\\u*xxxx*"                                         | Hexadecimal Unicode character                      |
++----------------------------------------------------+----------------------------------------------------+
+| "\\U*xxxxxxxx*"                                     | Hexadecimal Unicode character                      |
++----------------------------------------------------+----------------------------------------------------+
+
+
+Ignored end of line
+-------------------
+
+A backslash can be added at the end of a line to ignore the newline:
+
+   >>> 'This string will not include \\
+   ... backslashes or newline characters.'
+   'This string will not include backslashes or newline characters.'
+
+The same result can be achieved using triple-quoted strings, or
+parentheses and string literal concatenation.
+
+
+Escaped characters
+------------------
+
+To include a backslash in a non-raw Python string literal, it must be
+doubled. The "\\\\" escape sequence denotes a single backslash
+character:
+
+   >>> print('C:\\\\Program Files')
+   C:\\Program Files
+
+Similarly, the "\\'" and "\\"" sequences denote the single and double
+quote character, respectively:
+
+   >>> print('\\' and \\"')
+   ' and "
+
+
+Octal character
+---------------
+
+The sequence "\\*ooo*" denotes a *character* with the octal (base 8)
+value *ooo*:
+
+   >>> '\\120'
+   'P'
+
+Up to three octal digits (0 through 7) are accepted.
+
+In a bytes literal, *character* means a *byte* with the given value.
+In a string literal, it means a Unicode character with the given
+value.
+
+Changed in version 3.11: Octal escapes with value larger than "0o377"
+(255) produce a "DeprecationWarning".
+
+Changed in version 3.12: Octal escapes with value larger than "0o377"
+(255) produce a "SyntaxWarning". In a future Python version they will
+raise a "SyntaxError".
+
+
+Hexadecimal character
+---------------------
+
+The sequence "\\x*hh*" denotes a *character* with the hex (base 16)
+value *hh*:
+
+   >>> '\\x50'
+   'P'
+
+Unlike in Standard C, exactly two hex digits are required.
+
+In a bytes literal, *character* means a *byte* with the given value.
+In a string literal, it means a Unicode character with the given
+value.
+
+
+Named Unicode character
+-----------------------
+
+The sequence "\\N{*name*}" denotes a Unicode character with the given
+*name*:
+
+   >>> '\\N{LATIN CAPITAL LETTER P}'
+   'P'
+   >>> '\\N{SNAKE}'
+   '🐍'
+
+This sequence cannot appear in bytes literals.
+
+Changed in version 3.3: Support for name aliases has been added.
+
+
+Hexadecimal Unicode characters
+------------------------------
+
+These sequences "\\u*xxxx*" and "\\U*xxxxxxxx*" denote the Unicode
+character with the given hex (base 16) value. Exactly four digits are
+required for "\\u"; exactly eight digits are required for "\\U". The
+latter can encode any Unicode character.
+
+   >>> '\\u1234'
+   'ሴ'
+   >>> '\\U0001f40d'
+   '🐍'
+
+These sequences cannot appear in bytes literals.
+
+
+Unrecognized escape sequences
+-----------------------------
+
+Unlike in Standard C, all unrecognized escape sequences are left in
+the string unchanged, that is, *the backslash is left in the result*:
+
+   >>> print('\\q')
+   \\q
+   >>> list('\\q')
+   ['\\\\', 'q']
+
+Note that for bytes literals, the escape sequences only recognized in
+string literals ("\\N...", "\\u...", "\\U...") fall into the category of
+unrecognized escapes.
+
+Changed in version 3.6: Unrecognized escape sequences produce a
+"DeprecationWarning".
+
+Changed in version 3.12: Unrecognized escape sequences produce a
+"SyntaxWarning". In a future Python version they will raise a
+"SyntaxError".
+
+
+Bytes literals
+==============
+
+*Bytes literals* are always prefixed with ‘"b"’ or ‘"B"’; they produce
+an instance of the "bytes" type instead of the "str" type. They may
+only contain ASCII characters; bytes with a numeric value of 128 or
+greater must be expressed with escape sequences (typically Hexadecimal
+character or Octal character):
+
+   >>> b'\\x89PNG\\r\\n\\x1a\\n'
+   b'\\x89PNG\\r\\n\\x1a\\n'
+   >>> list(b'\\x89PNG\\r\\n\\x1a\\n')
+   [137, 80, 78, 71, 13, 10, 26, 10]
+
+Similarly, a zero byte must be expressed using an escape sequence
+(typically "\\0" or "\\x00").
+
+
+Raw string literals
+===================
+
+Both string and bytes literals may optionally be prefixed with a
+letter ‘"r"’ or ‘"R"’; such constructs are called *raw string
+literals* and *raw bytes literals* respectively and treat backslashes
+as literal characters. As a result, in raw string literals, escape
+sequences are not treated specially:
+
+   >>> r'\\d{4}-\\d{2}-\\d{2}'
+   '\\\\d{4}-\\\\d{2}-\\\\d{2}'
+
+Even in a raw literal, quotes can be escaped with a backslash, but the
+backslash remains in the result; for example, "r"\\""" is a valid
+string literal consisting of two characters: a backslash and a double
+quote; "r"\\"" is not a valid string literal (even a raw string cannot
+end in an odd number of backslashes).  Specifically, *a raw literal
+cannot end in a single backslash* (since the backslash would escape
+the following quote character).  Note also that a single backslash
+followed by a newline is interpreted as those two characters as part
+of the literal, *not* as a line continuation.
+
+
+f-strings
+=========
+
+Added in version 3.6.
+
+Changed in version 3.7: The "await" and "async for" can be used in
+expressions within f-strings.
+
+Changed in version 3.8: Added the debug specifier ("=")
+
+Changed in version 3.12: Many restrictions on expressions within
+f-strings have been removed. Notably, nested strings, comments, and
+backslashes are now permitted.
+
+A *formatted string literal* or *f-string* is a string literal that is
+prefixed with ‘"f"’ or ‘"F"’. Unlike other string literals, f-strings
+do not have a constant value. They may contain *replacement fields*
+delimited by curly braces "{}". Replacement fields contain expressions
+which are evaluated at run time. For example:
+
+   >>> who = 'nobody'
+   >>> nationality = 'Spanish'
+   >>> f'{who.title()} expects the {nationality} Inquisition!'
+   'Nobody expects the Spanish Inquisition!'
+
+Any doubled curly braces ("{{" or "}}") outside replacement fields are
+replaced with the corresponding single curly brace:
+
+   >>> print(f'{{...}}')
+   {...}
+
+Other characters outside replacement fields are treated like in
+ordinary string literals. This means that escape sequences are decoded
+(except when a literal is also marked as a raw string), and newlines
+are possible in triple-quoted f-strings:
+
+   >>> name = 'Galahad'
+   >>> favorite_color = 'blue'
+   >>> print(f'{name}:\\t{favorite_color}')
+   Galahad:       blue
+   >>> print(rf"C:\\Users\\{name}")
+   C:\\Users\\Galahad
+   >>> print(f\'\'\'Three shall be the number of the counting
+   ... and the number of the counting shall be three.\'\'\')
+   Three shall be the number of the counting
+   and the number of the counting shall be three.
+
+Expressions in formatted string literals are treated like regular
+Python expressions. Each expression is evaluated in the context where
+the formatted string literal appears, in order from left to right. An
+empty expression is not allowed, and both "lambda" and assignment
+expressions ":=" must be surrounded by explicit parentheses:
+
+   >>> f'{(half := 1/2)}, {half * 42}'
+   '0.5, 21.0'
+
+Reusing the outer f-string quoting type inside a replacement field is
+permitted:
+
+   >>> a = dict(x=2)
+   >>> f"abc {a["x"]} def"
+   'abc 2 def'
+
+Backslashes are also allowed in replacement fields and are evaluated
+the same way as in any other context:
+
+   >>> a = ["a", "b", "c"]
+   >>> print(f"List a contains:\\n{"\\n".join(a)}")
+   List a contains:
+   a
+   b
+   c
+
+It is possible to nest f-strings:
+
+   >>> name = 'world'
+   >>> f'Repeated:{f' hello {name}' * 3}'
+   'Repeated: hello world hello world hello world'
+
+Portable Python programs should not use more than 5 levels of nesting.
+
+**CPython implementation detail:** CPython does not limit nesting of
+f-strings.
+
+Replacement expressions can contain newlines in both single-quoted and
+triple-quoted f-strings and they can contain comments. Everything that
+comes after a "#" inside a replacement field is a comment (even
+closing braces and quotes). This means that replacement fields with
+comments must be closed in a different line:
+
+   >>> a = 2
+   >>> f"abc{a  # This comment  }"  continues until the end of the line
+   ...       + 3}"
+   'abc5'
+
+After the expression, replacement fields may optionally contain:
+
+* a *debug specifier* – an equal sign ("="), optionally surrounded by
+  whitespace on one or both sides;
+
+* a *conversion specifier* – "!s", "!r" or "!a"; and/or
+
+* a *format specifier* prefixed with a colon (":").
+
+See the Standard Library section on f-strings for details on how these
+fields are evaluated.
+
+As that section explains, *format specifiers* are passed as the second
+argument to the "format()" function to format a replacement field
+value. For example, they can be used to specify a field width and
+padding characters using the Format Specification Mini-Language:
+
+   >>> number = 14.3
+   >>> f'{number:20.7f}'
+   '          14.3000000'
+
+Top-level format specifiers may include nested replacement fields:
+
+   >>> field_size = 20
+   >>> precision = 7
+   >>> f'{number:{field_size}.{precision}f}'
+   '          14.3000000'
+
+These nested fields may include their own conversion fields and format
+specifiers:
+
+   >>> number = 3
+   >>> f'{number:{field_size}}'
+   '                   3'
+   >>> f'{number:{field_size:05}}'
+   '00000000000000000003'
+
+However, these nested fields may not include more deeply nested
+replacement fields.
+
+Formatted string literals cannot be used as *docstrings*, even if they
+do not include expressions:
+
+   >>> def foo():
+   ...     f"Not a docstring"
+   ...
+   >>> print(foo.__doc__)
+   None
+
+See also:
+
+  * **PEP 498** – Literal String Interpolation
+
+  * **PEP 701** – Syntactic formalization of f-strings
+
+  * "str.format()", which uses a related format string mechanism.
+
+
+t-strings
+=========
+
+Added in version 3.14.
+
+A *template string literal* or *t-string* is a string literal that is
+prefixed with ‘"t"’ or ‘"T"’. These strings follow the same syntax
+rules as formatted string literals. For differences in evaluation
+rules, see the Standard Library section on t-strings
+
+
+Formal grammar for f-strings
+============================
+
+F-strings are handled partly by the *lexical analyzer*, which produces
+the tokens "FSTRING_START", "FSTRING_MIDDLE" and "FSTRING_END", and
+partly by the parser, which handles expressions in the replacement
+field. The exact way the work is split is a CPython implementation
+detail.
+
+Correspondingly, the f-string grammar is a mix of lexical and
+syntactic definitions.
+
+Whitespace is significant in these situations:
+
+* There may be no whitespace in "FSTRING_START" (between the prefix
+  and quote).
+
+* Whitespace in "FSTRING_MIDDLE" is part of the literal string
+  contents.
+
+* In "fstring_replacement_field", if "f_debug_specifier" is present,
+  all whitespace after the opening brace until the
+  "f_debug_specifier", as well as whitespace immediately following
+  "f_debug_specifier", is retained as part of the expression.
+
+  **CPython implementation detail:** The expression is not handled in
+  the tokenization phase; it is retrieved from the source code using
+  locations of the "{" token and the token after "=".
+
+The "FSTRING_MIDDLE" definition uses negative lookaheads ("!") to
+indicate special characters (backslash, newline, "{", "}") and
+sequences ("f_quote").
+
+   fstring:    FSTRING_START fstring_middle* FSTRING_END
+
+   FSTRING_START:      fstringprefix ("'" | '"' | "\'\'\'" | '"""')
+   FSTRING_END:        f_quote
+   fstringprefix:      <("f" | "fr" | "rf"), case-insensitive>
+   f_debug_specifier:  '='
+   f_quote:            <the quote character(s) used in FSTRING_START>
+
+   fstring_middle:
+      | fstring_replacement_field
+      | FSTRING_MIDDLE
+   FSTRING_MIDDLE:
+      | (!"\\" !newline !'{' !'}' !f_quote) source_character
+      | stringescapeseq
+      | "{{"
+      | "}}"
+      | <newline, in triple-quoted f-strings only>
+   fstring_replacement_field:
+      | '{' f_expression [f_debug_specifier] [fstring_conversion]
+            [fstring_full_format_spec] '}'
+   fstring_conversion:
+      | "!" ("s" | "r" | "a")
+   fstring_full_format_spec:
+      | ':' fstring_format_spec*
+   fstring_format_spec:
+      | FSTRING_MIDDLE
+      | fstring_replacement_field
+   f_expression:
+      | ','.(conditional_expression | "*" or_expr)+ [","]
+      | yield_expression
+
+Note:
+
+  In the above grammar snippet, the "f_quote" and "FSTRING_MIDDLE"
+  rules are context-sensitive – they depend on the contents of
+  "FSTRING_START" of the nearest enclosing "fstring".Constructing a
+  more traditional formal grammar from this template is left as an
+  exercise for the reader.
+
+The grammar for t-strings is identical to the one for f-strings, with
+*t* instead of *f* at the beginning of rule and token names and in the
+prefix.
+
+   tstring:    TSTRING_START tstring_middle* TSTRING_END
+
+   <rest of the t-string grammar is omitted; see above>
+''',
+    'subscriptions': r'''Subscriptions and slicings
+**************************
+
+The *subscription* syntax is usually used for selecting an element
+from a container – for example, to get a value from a "dict":
+
+   >>> digits_by_name = {'one': 1, 'two': 2}
+   >>> digits_by_name['two']  # Subscripting a dictionary using the key 'two'
+   2
+
+In the subscription syntax, the object being subscribed – a primary –
+is followed by a *subscript* in square brackets. In the simplest case,
+the subscript is a single expression.
+
+Depending on the type of the object being subscribed, the subscript is
+sometimes called a *key* (for mappings), *index* (for sequences), or
+*type argument* (for *generic types*). Syntactically, these are all
+equivalent:
+
+   >>> colors = ['red', 'blue', 'green', 'black']
+   >>> colors[3]  # Subscripting a list using the index 3
+   'black'
+
+   >>> list[str]  # Parameterizing the list type using the type argument str
+   list[str]
+
+At runtime, the interpreter will evaluate the primary and the
+subscript, and call the primary’s "__getitem__()" or
+"__class_getitem__()" *special method* with the subscript as argument.
+For more details on which of these methods is called, see
+__class_getitem__ versus __getitem__.
+
+To show how subscription works, we can define a custom object that
+implements "__getitem__()" and prints out the value of the subscript:
+
+   >>> class SubscriptionDemo:
+   ...     def __getitem__(self, key):
+   ...         print(f'subscripted with: {key!r}')
+   ...
+   >>> demo = SubscriptionDemo()
+   >>> demo[1]
+   subscripted with: 1
+   >>> demo['a' * 3]
+   subscripted with: 'aaa'
+
+See "__getitem__()" documentation for how built-in types handle
+subscription.
+
+Subscriptions may also be used as targets in assignment or deletion
+statements. In these cases, the interpreter will call the subscripted
+object’s "__setitem__()" or "__delitem__()" *special method*,
+respectively, instead of "__getitem__()".
+
+   >>> colors = ['red', 'blue', 'green', 'black']
+   >>> colors[3] = 'white'  # Setting item at index
+   >>> colors
+   ['red', 'blue', 'green', 'white']
+   >>> del colors[3]  # Deleting item at index 3
+   >>> colors
+   ['red', 'blue', 'green']
+
+All advanced forms of *subscript* documented in the following sections
+are also usable for assignment and deletion.
+
+
+Slicings
+========
+
+A more advanced form of subscription, *slicing*, is commonly used to
+extract a portion of a sequence. In this form, the subscript is a
+*slice*: up to three expressions separated by colons. Any of the
+expressions may be omitted, but a slice must contain at least one
+colon:
+
+   >>> number_names = ['zero', 'one', 'two', 'three', 'four', 'five']
+   >>> number_names[1:3]
+   ['one', 'two']
+   >>> number_names[1:]
+   ['one', 'two', 'three', 'four', 'five']
+   >>> number_names[:3]
+   ['zero', 'one', 'two']
+   >>> number_names[:]
+   ['zero', 'one', 'two', 'three', 'four', 'five']
+   >>> number_names[::2]
+   ['zero', 'two', 'four']
+   >>> number_names[:-3]
+   ['zero', 'one', 'two']
+   >>> del number_names[4:]
+   >>> number_names
+   ['zero', 'one', 'two', 'three']
+
+When a slice is evaluated, the interpreter constructs a "slice" object
+whose "start", "stop" and "step" attributes, respectively, are the
+results of the expressions between the colons. Any missing expression
+evaluates to "None". This "slice" object is then passed to the
+"__getitem__()" or "__class_getitem__()" *special method*, as above.
+
+   # continuing with the SubscriptionDemo instance defined above:
+   >>> demo[2:3]
+   subscripted with: slice(2, 3, None)
+   >>> demo[::'spam']
+   subscripted with: slice(None, None, 'spam')
+
+
+Comma-separated subscripts
+==========================
+
+The subscript can also be given as two or more comma-separated
+expressions or slices:
+
+   # continuing with the SubscriptionDemo instance defined above:
+   >>> demo[1, 2, 3]
+   subscripted with: (1, 2, 3)
+   >>> demo[1:2, 3]
+   subscripted with: (slice(1, 2, None), 3)
+
+This form is commonly used with numerical libraries for slicing multi-
+dimensional data. In this case, the interpreter constructs a "tuple"
+of the results of the expressions or slices, and passes this tuple to
+the "__getitem__()" or "__class_getitem__()" *special method*, as
+above.
+
+The subscript may also be given as a single expression or slice
+followed by a comma, to specify a one-element tuple:
+
+   >>> demo['spam',]
+   subscripted with: ('spam',)
+
+
+“Starred” subscriptions
+=======================
+
+Added in version 3.11: Expressions in *tuple_slices* may be starred.
+See **PEP 646**.
+
+The subscript can also contain a starred expression. In this case, the
+interpreter unpacks the result into a tuple, and passes this tuple to
+"__getitem__()" or "__class_getitem__()":
+
+   # continuing with the SubscriptionDemo instance defined above:
+   >>> demo[*range(10)]
+   subscripted with: (0, 1, 2, 3, 4, 5, 6, 7, 8, 9)
+
+Starred expressions may be combined with comma-separated expressions
+and slices:
+
+   >>> demo['a', 'b', *range(3), 'c']
+   subscripted with: ('a', 'b', 0, 1, 2, 'c')
+
+
+Formal subscription grammar
+===========================
+
+   subscription:     primary '[' subscript ']'
+   subscript:        single_subscript | tuple_subscript
+   single_subscript: proper_slice | assignment_expression
+   proper_slice:     [expression] ":" [expression] [ ":" [expression] ]
+   tuple_subscript:  ','.(single_subscript | starred_expression)+ [',']
+
+Recall that the "|" operator denotes ordered choice. Specifically, in
+"subscript", if both alternatives would match, the first
+("single_subscript") has priority.
+''',
+    'truth': r'''Truth Value Testing
+*******************
+
+Any object can be tested for truth value, for use in an "if" or
+"while" condition or as operand of the Boolean operations below.
+
+By default, an object is considered true unless its class defines
+either a "__bool__()" method that returns "False" or a "__len__()"
+method that returns zero, when called with the object. [1] If one of
+the methods raises an exception when called, the exception is
+propagated and the object does not have a truth value (for example,
+"NotImplemented"). Here are most of the built-in objects considered
+false:
+
+* constants defined to be false: "None" and "False"
+
+* zero of any numeric type: "0", "0.0", "0j", "Decimal(0)",
+  "Fraction(0, 1)"
+
+* empty sequences and collections: "''", "()", "[]", "{}", "set()",
+  "range(0)"
+
+Operations and built-in functions that have a Boolean result always
+return "0" or "False" for false and "1" or "True" for true, unless
+otherwise stated. (Important exception: the Boolean operations "or"
+and "and" always return one of their operands.)
+''',
+    'try': r'''The "try" statement
+*******************
+
+The "try" statement specifies exception handlers and/or cleanup code
+for a group of statements:
+
+   try_stmt:  try1_stmt | try2_stmt | try3_stmt
+   try1_stmt: "try" ":" suite
+              ("except" [expression ["as" identifier]] ":" suite)+
+              ["else" ":" suite]
+              ["finally" ":" suite]
+   try2_stmt: "try" ":" suite
+              ("except" "*" expression ["as" identifier] ":" suite)+
+              ["else" ":" suite]
+              ["finally" ":" suite]
+   try3_stmt: "try" ":" suite
+              "finally" ":" suite
+
+Additional information on exceptions can be found in section
+Exceptions, and information on using the "raise" statement to generate
+exceptions may be found in section The raise statement.
+
+Changed in version 3.14: Support for optionally dropping grouping
+parentheses when using multiple exception types. See **PEP 758**.
+
+
+"except" clause
+===============
+
+The "except" clause(s) specify one or more exception handlers. When no
+exception occurs in the "try" clause, no exception handler is
+executed. When an exception occurs in the "try" suite, a search for an
+exception handler is started. This search inspects the "except"
+clauses in turn until one is found that matches the exception. An
+expression-less "except" clause, if present, must be last; it matches
+any exception.
+
+For an "except" clause with an expression, the expression must
+evaluate to an exception type or a tuple of exception types.
+Parentheses can be dropped if multiple exception types are provided
+and the "as" clause is not used. The raised exception matches an
+"except" clause whose expression evaluates to the class or a *non-
+virtual base class* of the exception object, or to a tuple that
+contains such a class.
+
+If no "except" clause matches the exception, the search for an
+exception handler continues in the surrounding code and on the
+invocation stack.  [1]
+
+If the evaluation of an expression in the header of an "except" clause
+raises an exception, the original search for a handler is canceled and
+a search starts for the new exception in the surrounding code and on
+the call stack (it is treated as if the entire "try" statement raised
+the exception).
+
+When a matching "except" clause is found, the exception is assigned to
+the target specified after the "as" keyword in that "except" clause,
+if present, and the "except" clause’s suite is executed. All "except"
+clauses must have an executable block. When the end of this block is
+reached, execution continues normally after the entire "try"
+statement. (This means that if two nested handlers exist for the same
+exception, and the exception occurs in the "try" clause of the inner
+handler, the outer handler will not handle the exception.)
+
+When an exception has been assigned using "as target", it is cleared
+at the end of the "except" clause.  This is as if
+
+   except E as N:
+       foo
+
+was translated to
+
+   except E as N:
+       try:
+           foo
+       finally:
+           del N
+
+This means the exception must be assigned to a different name to be
+able to refer to it after the "except" clause. Exceptions are cleared
+because with the traceback attached to them, they form a reference
+cycle with the stack frame, keeping all locals in that frame alive
+until the next garbage collection occurs.
+
+Before an "except" clause’s suite is executed, the exception is stored
+in the "sys" module, where it can be accessed from within the body of
+the "except" clause by calling "sys.exception()". When leaving an
+exception handler, the exception stored in the "sys" module is reset
+to its previous value:
+
+   >>> print(sys.exception())
+   None
+   >>> try:
+   ...     raise TypeError
+   ... except:
+   ...     print(repr(sys.exception()))
+   ...     try:
+   ...          raise ValueError
+   ...     except:
+   ...         print(repr(sys.exception()))
+   ...     print(repr(sys.exception()))
+   ...
+   TypeError()
+   ValueError()
+   TypeError()
+   >>> print(sys.exception())
+   None
+
+
+"except*" clause
+================
+
+The "except*" clause(s) specify one or more handlers for groups of
+exceptions ("BaseExceptionGroup" instances). A "try" statement can
+have either "except" or "except*" clauses, but not both. The exception
+type for matching is mandatory in the case of "except*", so "except*:"
+is a syntax error. The type is interpreted as in the case of "except",
+but matching is performed on the exceptions contained in the group
+that is being handled. An "TypeError" is raised if a matching type is
+a subclass of "BaseExceptionGroup", because that would have ambiguous
+semantics.
+
+When an exception group is raised in the try block, each "except*"
+clause splits (see "split()") it into the subgroups of matching and
+non-matching exceptions. If the matching subgroup is not empty, it
+becomes the handled exception (the value returned from
+"sys.exception()") and assigned to the target of the "except*" clause
+(if there is one). Then, the body of the "except*" clause executes. If
+the non-matching subgroup is not empty, it is processed by the next
+"except*" in the same manner. This continues until all exceptions in
+the group have been matched, or the last "except*" clause has run.
+
+After all "except*" clauses execute, the group of unhandled exceptions
+is merged with any exceptions that were raised or re-raised from
+within "except*" clauses. This merged exception group propagates on.:
+
+   >>> try:
+   ...     raise ExceptionGroup("eg",
+   ...         [ValueError(1), TypeError(2), OSError(3), OSError(4)])
+   ... except* TypeError as e:
+   ...     print(f'caught {type(e)} with nested {e.exceptions}')
+   ... except* OSError as e:
+   ...     print(f'caught {type(e)} with nested {e.exceptions}')
+   ...
+   caught <class 'ExceptionGroup'> with nested (TypeError(2),)
+   caught <class 'ExceptionGroup'> with nested (OSError(3), OSError(4))
+     + Exception Group Traceback (most recent call last):
+     |   File "<doctest default[0]>", line 2, in <module>
+     |     raise ExceptionGroup("eg",
+     |         [ValueError(1), TypeError(2), OSError(3), OSError(4)])
+     | ExceptionGroup: eg (1 sub-exception)
+     +-+---------------- 1 ----------------
+       | ValueError: 1
+       +------------------------------------
+
+If the exception raised from the "try" block is not an exception group
+and its type matches one of the "except*" clauses, it is caught and
+wrapped by an exception group with an empty message string. This
+ensures that the type of the target "e" is consistently
+"BaseExceptionGroup":
+
+   >>> try:
+   ...     raise BlockingIOError
+   ... except* BlockingIOError as e:
+   ...     print(repr(e))
+   ...
+   ExceptionGroup('', (BlockingIOError(),))
+
+"break", "continue" and "return" cannot appear in an "except*" clause.
+
+
+"else" clause
+=============
+
+The optional "else" clause is executed if the control flow leaves the
+"try" suite, no exception was raised, and no "return", "continue", or
+"break" statement was executed.  Exceptions in the "else" clause are
+not handled by the preceding "except" clauses.
+
+
+"finally" clause
+================
+
+If "finally" is present, it specifies a ‘cleanup’ handler.  The "try"
+clause is executed, including any "except" and "else" clauses. If an
+exception occurs in any of the clauses and is not handled, the
+exception is temporarily saved. The "finally" clause is executed.  If
+there is a saved exception it is re-raised at the end of the "finally"
+clause. If the "finally" clause raises another exception, the saved
+exception is set as the context of the new exception. If the "finally"
+clause executes a "return", "break" or "continue" statement, the saved
+exception is discarded. For example, this function returns 42.
+
+   def f():
+       try:
+           1/0
+       finally:
+           return 42
+
+The exception information is not available to the program during
+execution of the "finally" clause.
+
+When a "return", "break" or "continue" statement is executed in the
+"try" suite of a "try"…"finally" statement, the "finally" clause is
+also executed ‘on the way out.’
+
+The return value of a function is determined by the last "return"
+statement executed.  Since the "finally" clause always executes, a
+"return" statement executed in the "finally" clause will always be the
+last one executed. The following function returns ‘finally’.
+
+   def foo():
+       try:
+           return 'try'
+       finally:
+           return 'finally'
+
+Changed in version 3.8: Prior to Python 3.8, a "continue" statement
+was illegal in the "finally" clause due to a problem with the
+implementation.
+
+Changed in version 3.14: The compiler emits a "SyntaxWarning" when a
+"return", "break" or "continue" appears in a "finally" block (see
+**PEP 765**).
+''',
+    'types': r'''The standard type hierarchy
+***************************
+
+Below is a list of the types that are built into Python.  Extension
+modules (written in C, Java, or other languages, depending on the
+implementation) can define additional types.  Future versions of
+Python may add types to the type hierarchy (e.g., rational numbers,
+efficiently stored arrays of integers, etc.), although such additions
+will often be provided via the standard library instead.
+
+Some of the type descriptions below contain a paragraph listing
+‘special attributes.’  These are attributes that provide access to the
+implementation and are not intended for general use.  Their definition
+may change in the future.
+
+
+None
+====
+
+This type has a single value.  There is a single object with this
+value. This object is accessed through the built-in name "None". It is
+used to signify the absence of a value in many situations, e.g., it is
+returned from functions that don’t explicitly return anything. Its
+truth value is false.
+
+
+NotImplemented
+==============
+
+This type has a single value.  There is a single object with this
+value. This object is accessed through the built-in name
+"NotImplemented". Numeric methods and rich comparison methods should
+return this value if they do not implement the operation for the
+operands provided.  (The interpreter will then try the reflected
+operation, or some other fallback, depending on the operator.)  It
+should not be evaluated in a boolean context.
+
+See Implementing the arithmetic operations for more details.
+
+Changed in version 3.9: Evaluating "NotImplemented" in a boolean
+context was deprecated.
+
+Changed in version 3.14: Evaluating "NotImplemented" in a boolean
+context now raises a "TypeError". It previously evaluated to "True"
+and emitted a "DeprecationWarning" since Python 3.9.
+
+
+Ellipsis
+========
+
+This type has a single value.  There is a single object with this
+value. This object is accessed through the literal "..." or the built-
+in name "Ellipsis".  Its truth value is true.
+
+
+"numbers.Number"
+================
+
+These are created by numeric literals and returned as results by
+arithmetic operators and arithmetic built-in functions.  Numeric
+objects are immutable; once created their value never changes.  Python
+numbers are of course strongly related to mathematical numbers, but
+subject to the limitations of numerical representation in computers.
+
+The string representations of the numeric classes, computed by
+"__repr__()" and "__str__()", have the following properties:
+
+* They are valid numeric literals which, when passed to their class
+  constructor, produce an object having the value of the original
+  numeric.
+
+* The representation is in base 10, when possible.
+
+* Leading zeros, possibly excepting a single zero before a decimal
+  point, are not shown.
+
+* Trailing zeros, possibly excepting a single zero after a decimal
+  point, are not shown.
+
+* A sign is shown only when the number is negative.
+
+Python distinguishes between integers, floating-point numbers, and
+complex numbers:
+
+
+"numbers.Integral"
+------------------
+
+These represent elements from the mathematical set of integers
+(positive and negative).
+
+Note:
+
+  The rules for integer representation are intended to give the most
+  meaningful interpretation of shift and mask operations involving
+  negative integers.
+
+There are two types of integers:
+
+Integers ("int")
+   These represent numbers in an unlimited range, subject to available
+   (virtual) memory only.  For the purpose of shift and mask
+   operations, a binary representation is assumed, and negative
+   numbers are represented in a variant of 2’s complement which gives
+   the illusion of an infinite string of sign bits extending to the
+   left.
+
+Booleans ("bool")
+   These represent the truth values False and True.  The two objects
+   representing the values "False" and "True" are the only Boolean
+   objects. The Boolean type is a subtype of the integer type, and
+   Boolean values behave like the values 0 and 1, respectively, in
+   almost all contexts, the exception being that when converted to a
+   string, the strings ""False"" or ""True"" are returned,
+   respectively.
+
+
+"numbers.Real" ("float")
+------------------------
+
+These represent machine-level double precision floating-point numbers.
+You are at the mercy of the underlying machine architecture (and C or
+Java implementation) for the accepted range and handling of overflow.
+Python does not support single-precision floating-point numbers; the
+savings in processor and memory usage that are usually the reason for
+using these are dwarfed by the overhead of using objects in Python, so
+there is no reason to complicate the language with two kinds of
+floating-point numbers.
+
+
+"numbers.Complex" ("complex")
+-----------------------------
+
+These represent complex numbers as a pair of machine-level double
+precision floating-point numbers.  The same caveats apply as for
+floating-point numbers. The real and imaginary parts of a complex
+number "z" can be retrieved through the read-only attributes "z.real"
+and "z.imag".
+
+
+Sequences
+=========
+
+These represent finite ordered sets indexed by non-negative numbers.
+The built-in function "len()" returns the number of items of a
+sequence. When the length of a sequence is *n*, the index set contains
+the numbers 0, 1, …, *n*-1.  Item *i* of sequence *a* is selected by
+"a[i]". Some sequences, including built-in sequences, interpret
+negative subscripts by adding the sequence length. For example,
+"a[-2]" equals "a[n-2]", the second to last item of sequence a with
+length "n".
+
+The resulting value must be a nonnegative integer less than the number
+of items in the sequence. If it is not, an "IndexError" is raised.
+
+Sequences also support slicing: "a[start:stop]" selects all items with
+index *k* such that *start* "<=" *k* "<" *stop*.  When used as an
+expression, a slice is a sequence of the same type. The comment above
+about negative subscripts also applies to negative slice positions.
+Note that no error is raised if a slice position is less than zero or
+larger than the length of the sequence.
+
+If *start* is missing or "None", slicing behaves as if *start* was
+zero. If *stop* is missing or "None", slicing behaves as if *stop* was
+equal to the length of the sequence.
+
+Some sequences also support “extended slicing” with a third “step”
+parameter: "a[i:j:k]" selects all items of *a* with index *x* where "x
+= i + n*k", *n* ">=" "0" and *i* "<=" *x* "<" *j*.
+
+Sequences are distinguished according to their mutability:
+
+
+Immutable sequences
+-------------------
+
+An object of an immutable sequence type cannot change once it is
+created.  (If the object contains references to other objects, these
+other objects may be mutable and may be changed; however, the
+collection of objects directly referenced by an immutable object
+cannot change.)
+
+The following types are immutable sequences:
+
+Strings
+   A string ("str") is a sequence of values that represent
+   *characters*, or more formally, *Unicode code points*. All the code
+   points in the range "0" to "0x10FFFF" can be represented in a
+   string.
+
+   Python doesn’t have a dedicated *character* type. Instead, every
+   code point in the string is represented as a string object with
+   length "1".
+
+   The built-in function "ord()" converts a code point from its string
+   form to an integer in the range "0" to "0x10FFFF"; "chr()" converts
+   an integer in the range "0" to "0x10FFFF" to the corresponding
+   length "1" string object. "str.encode()" can be used to convert a
+   "str" to "bytes" using the given text encoding, and
+   "bytes.decode()" can be used to achieve the opposite.
+
+Tuples
+   The items of a "tuple" are arbitrary Python objects. Tuples of two
+   or more items are formed by comma-separated lists of expressions.
+   A tuple of one item (a ‘singleton’) can be formed by affixing a
+   comma to an expression (an expression by itself does not create a
+   tuple, since parentheses must be usable for grouping of
+   expressions).  An empty tuple can be formed by an empty pair of
+   parentheses.
+
+Bytes
+   A "bytes" object is an immutable array.  The items are 8-bit bytes,
+   represented by integers in the range 0 <= x < 256.  Bytes literals
+   (like "b'abc'") and the built-in "bytes()" constructor can be used
+   to create bytes objects.  Also, bytes objects can be decoded to
+   strings via the "decode()" method.
+
+
+Mutable sequences
+-----------------
+
+Mutable sequences can be changed after they are created.  The
+subscription and slicing notations can be used as the target of
+assignment and "del" (delete) statements.
+
+Note:
+
+  The "collections" and "array" module provide additional examples of
+  mutable sequence types.
+
+There are currently two intrinsic mutable sequence types:
+
+Lists
+   The items of a list are arbitrary Python objects.  Lists are formed
+   by placing a comma-separated list of expressions in square
+   brackets. (Note that there are no special cases needed to form
+   lists of length 0 or 1.)
+
+Byte Arrays
+   A bytearray object is a mutable array. They are created by the
+   built-in "bytearray()" constructor.  Aside from being mutable (and
+   hence unhashable), byte arrays otherwise provide the same interface
+   and functionality as immutable "bytes" objects.
+
+
+Set types
+=========
+
+These represent unordered, finite sets of unique, immutable objects.
+As such, they cannot be indexed by any subscript. However, they can be
+iterated over, and the built-in function "len()" returns the number of
+items in a set. Common uses for sets are fast membership testing,
+removing duplicates from a sequence, and computing mathematical
+operations such as intersection, union, difference, and symmetric
+difference.
+
+For set elements, the same immutability rules apply as for dictionary
+keys. Note that numeric types obey the normal rules for numeric
+comparison: if two numbers compare equal (e.g., "1" and "1.0"), only
+one of them can be contained in a set.
+
+There are currently two intrinsic set types:
+
+Sets
+   These represent a mutable set. They are created by the built-in
+   "set()" constructor and can be modified afterwards by several
+   methods, such as "add()".
+
+Frozen sets
+   These represent an immutable set.  They are created by the built-in
+   "frozenset()" constructor.  As a frozenset is immutable and
+   *hashable*, it can be used again as an element of another set, or
+   as a dictionary key.
+
+
+Mappings
+========
+
+These represent finite sets of objects indexed by arbitrary index
+sets. The subscript notation "a[k]" selects the item indexed by "k"
+from the mapping "a"; this can be used in expressions and as the
+target of assignments or "del" statements. The built-in function
+"len()" returns the number of items in a mapping.
+
+There is currently a single intrinsic mapping type:
+
+
+Dictionaries
+------------
+
+These represent finite sets of objects indexed by nearly arbitrary
+values.  The only types of values not acceptable as keys are values
+containing lists or dictionaries or other mutable types that are
+compared by value rather than by object identity, the reason being
+that the efficient implementation of dictionaries requires a key’s
+hash value to remain constant. Numeric types used for keys obey the
+normal rules for numeric comparison: if two numbers compare equal
+(e.g., "1" and "1.0") then they can be used interchangeably to index
+the same dictionary entry.
+
+Dictionaries preserve insertion order, meaning that keys will be
+produced in the same order they were added sequentially over the
+dictionary. Replacing an existing key does not change the order,
+however removing a key and re-inserting it will add it to the end
+instead of keeping its old place.
+
+Dictionaries are mutable; they can be created by the "{}" notation
+(see section Dictionary displays).
+
+The extension modules "dbm.ndbm" and "dbm.gnu" provide additional
+examples of mapping types, as does the "collections" module.
+
+Changed in version 3.7: Dictionaries did not preserve insertion order
+in versions of Python before 3.6. In CPython 3.6, insertion order was
+preserved, but it was considered an implementation detail at that time
+rather than a language guarantee.
+
+
+Callable types
+==============
+
+These are the types to which the function call operation (see section
+Calls) can be applied:
+
+
+User-defined functions
+----------------------
+
+A user-defined function object is created by a function definition
+(see section Function definitions).  It should be called with an
+argument list containing the same number of items as the function’s
+formal parameter list.
+
+
+Special read-only attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++----------------------------------------------------+----------------------------------------------------+
+| Attribute                                          | Meaning                                            |
+|====================================================|====================================================|
+| function.__builtins__                              | A reference to the "dictionary" that holds the     |
+|                                                    | function’s builtins namespace.  Added in version   |
+|                                                    | 3.10.                                              |
++----------------------------------------------------+----------------------------------------------------+
+| function.__globals__                               | A reference to the "dictionary" that holds the     |
+|                                                    | function’s global variables – the global namespace |
+|                                                    | of the module in which the function was defined.   |
++----------------------------------------------------+----------------------------------------------------+
+| function.__closure__                               | "None" or a "tuple" of cells that contain bindings |
+|                                                    | for the names specified in the "co_freevars"       |
+|                                                    | attribute of the function’s "code object".  A cell |
+|                                                    | object has the attribute "cell_contents". This can |
+|                                                    | be used to get the value of the cell, as well as   |
+|                                                    | set the value.                                     |
++----------------------------------------------------+----------------------------------------------------+
+
+
+Special writable attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Most of these attributes check the type of the assigned value:
+
++----------------------------------------------------+----------------------------------------------------+
+| Attribute                                          | Meaning                                            |
+|====================================================|====================================================|
+| function.__doc__                                   | The function’s documentation string, or "None" if  |
+|                                                    | unavailable.                                       |
++----------------------------------------------------+----------------------------------------------------+
+| function.__name__                                  | The function’s name. See also: "__name__           |
+|                                                    | attributes".                                       |
++----------------------------------------------------+----------------------------------------------------+
+| function.__qualname__                              | The function’s *qualified name*. See also:         |
+|                                                    | "__qualname__ attributes".  Added in version 3.3.  |
++----------------------------------------------------+----------------------------------------------------+
+| function.__module__                                | The name of the module the function was defined    |
+|                                                    | in, or "None" if unavailable.                      |
++----------------------------------------------------+----------------------------------------------------+
+| function.__defaults__                              | A "tuple" containing default *parameter* values    |
+|                                                    | for those parameters that have defaults, or "None" |
+|                                                    | if no parameters have a default value.             |
++----------------------------------------------------+----------------------------------------------------+
+| function.__code__                                  | The code object representing the compiled function |
+|                                                    | body.                                              |
++----------------------------------------------------+----------------------------------------------------+
+| function.__dict__                                  | The namespace supporting arbitrary function        |
+|                                                    | attributes. See also: "__dict__ attributes".       |
++----------------------------------------------------+----------------------------------------------------+
+| function.__annotations__                           | A "dictionary" containing annotations of           |
+|                                                    | *parameters*. The keys of the dictionary are the   |
+|                                                    | parameter names, and "'return'" for the return     |
+|                                                    | annotation, if provided. See also:                 |
+|                                                    | "object.__annotations__".  Changed in version      |
+|                                                    | 3.14: Annotations are now lazily evaluated. See    |
+|                                                    | **PEP 649**.                                       |
++----------------------------------------------------+----------------------------------------------------+
+| function.__annotate__                              | The *annotate function* for this function, or      |
+|                                                    | "None" if the function has no annotations. See     |
+|                                                    | "object.__annotate__".  Added in version 3.14.     |
++----------------------------------------------------+----------------------------------------------------+
+| function.__kwdefaults__                            | A "dictionary" containing defaults for keyword-    |
+|                                                    | only *parameters*.                                 |
++----------------------------------------------------+----------------------------------------------------+
+| function.__type_params__                           | A "tuple" containing the type parameters of a      |
+|                                                    | generic function.  Added in version 3.12.          |
++----------------------------------------------------+----------------------------------------------------+
+
+Function objects also support getting and setting arbitrary
+attributes, which can be used, for example, to attach metadata to
+functions.  Regular attribute dot-notation is used to get and set such
+attributes.
+
+**CPython implementation detail:** CPython’s current implementation
+only supports function attributes on user-defined functions. Function
+attributes on built-in functions may be supported in the future.
+
+Additional information about a function’s definition can be retrieved
+from its code object (accessible via the "__code__" attribute).
+
+
+Instance methods
+----------------
+
+An instance method object combines a class, a class instance and any
+callable object (normally a user-defined function).
+
+Special read-only attributes:
+
++----------------------------------------------------+----------------------------------------------------+
+| method.__self__                                    | Refers to the class instance object to which the   |
+|                                                    | method is bound                                    |
++----------------------------------------------------+----------------------------------------------------+
+| method.__func__                                    | Refers to the original function object             |
++----------------------------------------------------+----------------------------------------------------+
+| method.__doc__                                     | The method’s documentation (same as                |
+|                                                    | "method.__func__.__doc__"). A "string" if the      |
+|                                                    | original function had a docstring, else "None".    |
++----------------------------------------------------+----------------------------------------------------+
+| method.__name__                                    | The name of the method (same as                    |
+|                                                    | "method.__func__.__name__")                        |
++----------------------------------------------------+----------------------------------------------------+
+| method.__module__                                  | The name of the module the method was defined in,  |
+|                                                    | or "None" if unavailable.                          |
++----------------------------------------------------+----------------------------------------------------+
+
+Methods also support accessing (but not setting) the arbitrary
+function attributes on the underlying function object.
+
+User-defined method objects may be created when getting an attribute
+of a class (perhaps via an instance of that class), if that attribute
+is a user-defined function object or a "classmethod" object.
+
+When an instance method object is created by retrieving a user-defined
+function object from a class via one of its instances, its "__self__"
+attribute is the instance, and the method object is said to be
+*bound*.  The new method’s "__func__" attribute is the original
+function object.
+
+When an instance method object is created by retrieving a
+"classmethod" object from a class or instance, its "__self__"
+attribute is the class itself, and its "__func__" attribute is the
+function object underlying the class method.
+
+When an instance method object is called, the underlying function
+("__func__") is called, inserting the class instance ("__self__") in
+front of the argument list.  For instance, when "C" is a class which
+contains a definition for a function "f()", and "x" is an instance of
+"C", calling "x.f(1)" is equivalent to calling "C.f(x, 1)".
+
+When an instance method object is derived from a "classmethod" object,
+the “class instance” stored in "__self__" will actually be the class
+itself, so that calling either "x.f(1)" or "C.f(1)" is equivalent to
+calling "f(C,1)" where "f" is the underlying function.
+
+It is important to note that user-defined functions which are
+attributes of a class instance are not converted to bound methods;
+this *only* happens when the function is an attribute of the class.
+
+
+Generator functions
+-------------------
+
+A function or method which uses the "yield" statement (see section The
+yield statement) is called a *generator function*.  Such a function,
+when called, always returns an *iterator* object which can be used to
+execute the body of the function:  calling the iterator’s
+"iterator.__next__()" method will cause the function to execute until
+it provides a value using the "yield" statement.  When the function
+executes a "return" statement or falls off the end, a "StopIteration"
+exception is raised and the iterator will have reached the end of the
+set of values to be returned.
+
+
+Coroutine functions
+-------------------
+
+A function or method which is defined using "async def" is called a
+*coroutine function*.  Such a function, when called, returns a
+*coroutine* object.  It may contain "await" expressions, as well as
+"async with" and "async for" statements. See also the Coroutine
+Objects section.
+
+
+Asynchronous generator functions
+--------------------------------
+
+A function or method which is defined using "async def" and which uses
+the "yield" statement is called a *asynchronous generator function*.
+Such a function, when called, returns an *asynchronous iterator*
+object which can be used in an "async for" statement to execute the
+body of the function.
+
+Calling the asynchronous iterator’s "aiterator.__anext__" method will
+return an *awaitable* which when awaited will execute until it
+provides a value using the "yield" expression.  When the function
+executes an empty "return" statement or falls off the end, a
+"StopAsyncIteration" exception is raised and the asynchronous iterator
+will have reached the end of the set of values to be yielded.
+
+
+Built-in functions
+------------------
+
+A built-in function object is a wrapper around a C function.  Examples
+of built-in functions are "len()" and "math.sin()" ("math" is a
+standard built-in module). The number and type of the arguments are
+determined by the C function. Special read-only attributes:
+
+* "__doc__" is the function’s documentation string, or "None" if
+  unavailable. See "function.__doc__".
+
+* "__name__" is the function’s name. See "function.__name__".
+
+* "__self__" is set to "None" (but see the next item).
+
+* "__module__" is the name of the module the function was defined in
+  or "None" if unavailable. See "function.__module__".
+
+
+Built-in methods
+----------------
+
+This is really a different disguise of a built-in function, this time
+containing an object passed to the C function as an implicit extra
+argument.  An example of a built-in method is "alist.append()",
+assuming *alist* is a list object. In this case, the special read-only
+attribute "__self__" is set to the object denoted by *alist*. (The
+attribute has the same semantics as it does with "other instance
+methods".)
+
+
+Classes
+-------
+
+Classes are callable.  These objects normally act as factories for new
+instances of themselves, but variations are possible for class types
+that override "__new__()".  The arguments of the call are passed to
+"__new__()" and, in the typical case, to "__init__()" to initialize
+the new instance.
+
+
+Class Instances
+---------------
+
+Instances of arbitrary classes can be made callable by defining a
+"__call__()" method in their class.
+
+
+Modules
+=======
+
+Modules are a basic organizational unit of Python code, and are
+created by the import system as invoked either by the "import"
+statement, or by calling functions such as "importlib.import_module()"
+and built-in "__import__()".  A module object has a namespace
+implemented by a "dictionary" object (this is the dictionary
+referenced by the "__globals__" attribute of functions defined in the
+module).  Attribute references are translated to lookups in this
+dictionary, e.g., "m.x" is equivalent to "m.__dict__["x"]". A module
+object does not contain the code object used to initialize the module
+(since it isn’t needed once the initialization is done).
+
+Attribute assignment updates the module’s namespace dictionary, e.g.,
+"m.x = 1" is equivalent to "m.__dict__["x"] = 1".
+
+
+Import-related attributes on module objects
+-------------------------------------------
+
+Module objects have the following attributes that relate to the import
+system. When a module is created using the machinery associated with
+the import system, these attributes are filled in based on the
+module’s *spec*, before the *loader* executes and loads the module.
+
+To create a module dynamically rather than using the import system,
+it’s recommended to use "importlib.util.module_from_spec()", which
+will set the various import-controlled attributes to appropriate
+values. It’s also possible to use the "types.ModuleType" constructor
+to create modules directly, but this technique is more error-prone, as
+most attributes must be manually set on the module object after it has
+been created when using this approach.
+
+Caution:
+
+  With the exception of "__name__", it is **strongly** recommended
+  that you rely on "__spec__" and its attributes instead of any of the
+  other individual attributes listed in this subsection. Note that
+  updating an attribute on "__spec__" will not update the
+  corresponding attribute on the module itself:
+
+     >>> import typing
+     >>> typing.__name__, typing.__spec__.name
+     ('typing', 'typing')
+     >>> typing.__spec__.name = 'spelling'
+     >>> typing.__name__, typing.__spec__.name
+     ('typing', 'spelling')
+     >>> typing.__name__ = 'keyboard_smashing'
+     >>> typing.__name__, typing.__spec__.name
+     ('keyboard_smashing', 'spelling')
+
+module.__name__
+
+   The name used to uniquely identify the module in the import system.
+   For a directly executed module, this will be set to ""__main__"".
+
+   This attribute must be set to the fully qualified name of the
+   module. It is expected to match the value of
+   "module.__spec__.name".
+
+module.__spec__
+
+   A record of the module’s import-system-related state.
+
+   Set to the "module spec" that was used when importing the module.
+   See Module specs for more details.
+
+   Added in version 3.4.
+
+module.__package__
+
+   The *package* a module belongs to.
+
+   If the module is top-level (that is, not a part of any specific
+   package) then the attribute should be set to "''" (the empty
+   string). Otherwise, it should be set to the name of the module’s
+   package (which can be equal to "module.__name__" if the module
+   itself is a package). See **PEP 366** for further details.
+
+   This attribute is used instead of "__name__" to calculate explicit
+   relative imports for main modules. It defaults to "None" for
+   modules created dynamically using the "types.ModuleType"
+   constructor; use "importlib.util.module_from_spec()" instead to
+   ensure the attribute is set to a "str".
+
+   It is **strongly** recommended that you use
+   "module.__spec__.parent" instead of "module.__package__".
+   "__package__" is now only used as a fallback if "__spec__.parent"
+   is not set, and this fallback path is deprecated.
+
+   Changed in version 3.4: This attribute now defaults to "None" for
+   modules created dynamically using the "types.ModuleType"
+   constructor. Previously the attribute was optional.
+
+   Changed in version 3.6: The value of "__package__" is expected to
+   be the same as "__spec__.parent". "__package__" is now only used as
+   a fallback during import resolution if "__spec__.parent" is not
+   defined.
+
+   Changed in version 3.10: "ImportWarning" is raised if an import
+   resolution falls back to "__package__" instead of
+   "__spec__.parent".
+
+   Changed in version 3.12: Raise "DeprecationWarning" instead of
+   "ImportWarning" when falling back to "__package__" during import
+   resolution.
+
+   Deprecated since version 3.13, will be removed in version 3.15:
+   "__package__" will cease to be set or taken into consideration by
+   the import system or standard library.
+
+module.__loader__
+
+   The *loader* object that the import machinery used to load the
+   module.
+
+   This attribute is mostly useful for introspection, but can be used
+   for additional loader-specific functionality, for example getting
+   data associated with a loader.
+
+   "__loader__" defaults to "None" for modules created dynamically
+   using the "types.ModuleType" constructor; use
+   "importlib.util.module_from_spec()" instead to ensure the attribute
+   is set to a *loader* object.
+
+   It is **strongly** recommended that you use
+   "module.__spec__.loader" instead of "module.__loader__".
+
+   Changed in version 3.4: This attribute now defaults to "None" for
+   modules created dynamically using the "types.ModuleType"
+   constructor. Previously the attribute was optional.
+
+   Deprecated since version 3.12, will be removed in version 3.16:
+   Setting "__loader__" on a module while failing to set
+   "__spec__.loader" is deprecated. In Python 3.16, "__loader__" will
+   cease to be set or taken into consideration by the import system or
+   the standard library.
+
+module.__path__
+
+   A (possibly empty) *sequence* of strings enumerating the locations
+   where the package’s submodules will be found. Non-package modules
+   should not have a "__path__" attribute. See __path__ attributes on
+   modules for more details.
+
+   It is **strongly** recommended that you use
+   "module.__spec__.submodule_search_locations" instead of
+   "module.__path__".
+
+module.__file__
+
+module.__cached__
+
+   "__file__" and "__cached__" are both optional attributes that may
+   or may not be set. Both attributes should be a "str" when they are
+   available.
+
+   "__file__" indicates the pathname of the file from which the module
+   was loaded (if loaded from a file), or the pathname of the shared
+   library file for extension modules loaded dynamically from a shared
+   library. It might be missing for certain types of modules, such as
+   C modules that are statically linked into the interpreter, and the
+   import system may opt to leave it unset if it has no semantic
+   meaning (for example, a module loaded from a database).
+
+   If "__file__" is set then the "__cached__" attribute might also be
+   set,  which is the path to any compiled version of the code (for
+   example, a byte-compiled file). The file does not need to exist to
+   set this attribute; the path can simply point to where the compiled
+   file *would* exist (see **PEP 3147**).
+
+   Note that "__cached__" may be set even if "__file__" is not set.
+   However, that scenario is quite atypical.  Ultimately, the *loader*
+   is what makes use of the module spec provided by the *finder* (from
+   which "__file__" and "__cached__" are derived).  So if a loader can
+   load from a cached module but otherwise does not load from a file,
+   that atypical scenario may be appropriate.
+
+   It is **strongly** recommended that you use
+   "module.__spec__.cached" instead of "module.__cached__".
+
+   Deprecated since version 3.13, will be removed in version 3.15:
+   Setting "__cached__" on a module while failing to set
+   "__spec__.cached" is deprecated. In Python 3.15, "__cached__" will
+   cease to be set or taken into consideration by the import system or
+   standard library.
+
+
+Other writable attributes on module objects
+-------------------------------------------
+
+As well as the import-related attributes listed above, module objects
+also have the following writable attributes:
+
+module.__doc__
+
+   The module’s documentation string, or "None" if unavailable. See
+   also: "__doc__ attributes".
+
+module.__annotations__
+
+   A dictionary containing *variable annotations* collected during
+   module body execution.  For best practices on working with
+   "__annotations__", see "annotationlib".
+
+   Changed in version 3.14: Annotations are now lazily evaluated. See
+   **PEP 649**.
+
+module.__annotate__
+
+   The *annotate function* for this module, or "None" if the module
+   has no annotations. See also: "__annotate__" attributes.
+
+   Added in version 3.14.
+
+
+Module dictionaries
+-------------------
+
+Module objects also have the following special read-only attribute:
+
+module.__dict__
+
+   The module’s namespace as a dictionary object. Uniquely among the
+   attributes listed here, "__dict__" cannot be accessed as a global
+   variable from within a module; it can only be accessed as an
+   attribute on module objects.
+
+   **CPython implementation detail:** Because of the way CPython
+   clears module dictionaries, the module dictionary will be cleared
+   when the module falls out of scope even if the dictionary still has
+   live references.  To avoid this, copy the dictionary or keep the
+   module around while using its dictionary directly.
+
+
+Custom classes
+==============
+
+Custom class types are typically created by class definitions (see
+section Class definitions).  A class has a namespace implemented by a
+dictionary object. Class attribute references are translated to
+lookups in this dictionary, e.g., "C.x" is translated to
+"C.__dict__["x"]" (although there are a number of hooks which allow
+for other means of locating attributes). When the attribute name is
+not found there, the attribute search continues in the base classes.
+This search of the base classes uses the C3 method resolution order
+which behaves correctly even in the presence of ‘diamond’ inheritance
+structures where there are multiple inheritance paths leading back to
+a common ancestor. Additional details on the C3 MRO used by Python can
+be found at The Python 2.3 Method Resolution Order.
+
+When a class attribute reference (for class "C", say) would yield a
+class method object, it is transformed into an instance method object
+whose "__self__" attribute is "C". When it would yield a
+"staticmethod" object, it is transformed into the object wrapped by
+the static method object. See section Implementing Descriptors for
+another way in which attributes retrieved from a class may differ from
+those actually contained in its "__dict__".
+
+Class attribute assignments update the class’s dictionary, never the
+dictionary of a base class.
+
+A class object can be called (see above) to yield a class instance
+(see below).
+
+
+Special attributes
+------------------
+
++----------------------------------------------------+----------------------------------------------------+
+| Attribute                                          | Meaning                                            |
+|====================================================|====================================================|
+| type.__name__                                      | The class’s name. See also: "__name__ attributes". |
++----------------------------------------------------+----------------------------------------------------+
+| type.__qualname__                                  | The class’s *qualified name*. See also:            |
+|                                                    | "__qualname__ attributes".                         |
++----------------------------------------------------+----------------------------------------------------+
+| type.__module__                                    | The name of the module in which the class was      |
+|                                                    | defined.                                           |
++----------------------------------------------------+----------------------------------------------------+
+| type.__dict__                                      | A "mapping proxy" providing a read-only view of    |
+|                                                    | the class’s namespace. See also: "__dict__         |
+|                                                    | attributes".                                       |
++----------------------------------------------------+----------------------------------------------------+
+| type.__bases__                                     | A "tuple" containing the class’s bases. In most    |
+|                                                    | cases, for a class defined as "class X(A, B, C)",  |
+|                                                    | "X.__bases__" will be exactly equal to "(A, B,     |
+|                                                    | C)".                                               |
++----------------------------------------------------+----------------------------------------------------+
+| type.__base__                                      | **CPython implementation detail:** The single base |
+|                                                    | class in the inheritance chain that is responsible |
+|                                                    | for the memory layout of instances. This attribute |
+|                                                    | corresponds to "tp_base" at the C level.           |
++----------------------------------------------------+----------------------------------------------------+
+| type.__doc__                                       | The class’s documentation string, or "None" if     |
+|                                                    | undefined. Not inherited by subclasses.            |
++----------------------------------------------------+----------------------------------------------------+
+| type.__annotations__                               | A dictionary containing *variable annotations*     |
+|                                                    | collected during class body execution. See also:   |
+|                                                    | "__annotations__ attributes".  For best practices  |
+|                                                    | on working with "__annotations__", please see      |
+|                                                    | "annotationlib". Use                               |
+|                                                    | "annotationlib.get_annotations()" instead of       |
+|                                                    | accessing this attribute directly.  Warning:       |
+|                                                    | Accessing the "__annotations__" attribute directly |
+|                                                    | on a class object may return annotations for the   |
+|                                                    | wrong class, specifically in certain cases where   |
+|                                                    | the class, its base class, or a metaclass is       |
+|                                                    | defined under "from __future__ import              |
+|                                                    | annotations". See **749** for details.This         |
+|                                                    | attribute does not exist on certain builtin        |
+|                                                    | classes. On user-defined classes without           |
+|                                                    | "__annotations__", it is an empty dictionary.      |
+|                                                    | Changed in version 3.14: Annotations are now       |
+|                                                    | lazily evaluated. See **PEP 649**.                 |
++----------------------------------------------------+----------------------------------------------------+
+| type.__annotate__()                                | The *annotate function* for this class, or "None"  |
+|                                                    | if the class has no annotations. See also:         |
+|                                                    | "__annotate__ attributes".  Added in version 3.14. |
++----------------------------------------------------+----------------------------------------------------+
+| type.__type_params__                               | A "tuple" containing the type parameters of a      |
+|                                                    | generic class.  Added in version 3.12.             |
++----------------------------------------------------+----------------------------------------------------+
+| type.__static_attributes__                         | A "tuple" containing names of attributes of this   |
+|                                                    | class which are assigned through "self.X" from any |
+|                                                    | function in its body.  Added in version 3.13.      |
++----------------------------------------------------+----------------------------------------------------+
+| type.__firstlineno__                               | The line number of the first line of the class     |
+|                                                    | definition, including decorators. Setting the      |
+|                                                    | "__module__" attribute removes the                 |
+|                                                    | "__firstlineno__" item from the type’s dictionary. |
+|                                                    | Added in version 3.13.                             |
++----------------------------------------------------+----------------------------------------------------+
+| type.__mro__                                       | The "tuple" of classes that are considered when    |
+|                                                    | looking for base classes during method resolution. |
++----------------------------------------------------+----------------------------------------------------+
+
+
+Special methods
+---------------
+
+In addition to the special attributes described above, all Python
+classes also have the following two methods available:
+
+type.mro()
+
+   This method can be overridden by a metaclass to customize the
+   method resolution order for its instances.  It is called at class
+   instantiation, and its result is stored in "__mro__".
+
+type.__subclasses__()
+
+   Each class keeps a list of weak references to its immediate
+   subclasses. This method returns a list of all those references
+   still alive. The list is in definition order. Example:
+
+      >>> class A: pass
+      >>> class B(A): pass
+      >>> A.__subclasses__()
+      [<class 'B'>]
+
+
+Class instances
+===============
+
+A class instance is created by calling a class object (see above).  A
+class instance has a namespace implemented as a dictionary which is
+the first place in which attribute references are searched.  When an
+attribute is not found there, and the instance’s class has an
+attribute by that name, the search continues with the class
+attributes.  If a class attribute is found that is a user-defined
+function object, it is transformed into an instance method object
+whose "__self__" attribute is the instance.  Static method and class
+method objects are also transformed; see above under “Classes”.  See
+section Implementing Descriptors for another way in which attributes
+of a class retrieved via its instances may differ from the objects
+actually stored in the class’s "__dict__".  If no class attribute is
+found, and the object’s class has a "__getattr__()" method, that is
+called to satisfy the lookup.
+
+Attribute assignments and deletions update the instance’s dictionary,
+never a class’s dictionary.  If the class has a "__setattr__()" or
+"__delattr__()" method, this is called instead of updating the
+instance dictionary directly.
+
+Class instances can pretend to be numbers, sequences, or mappings if
+they have methods with certain special names.  See section Special
+method names.
+
+
+Special attributes
+------------------
+
+object.__class__
+
+   The class to which a class instance belongs.
+
+object.__dict__
+
+   A dictionary or other mapping object used to store an object’s
+   (writable) attributes. Not all instances have a "__dict__"
+   attribute; see the section on __slots__ for more details.
+
+
+I/O objects (also known as file objects)
+========================================
+
+A *file object* represents an open file.  Various shortcuts are
+available to create file objects: the "open()" built-in function, and
+also "os.popen()", "os.fdopen()", and the "makefile()" method of
+socket objects (and perhaps by other functions or methods provided by
+extension modules).
+
+File objects implement common methods, listed below, to simplify usage
+in generic code. They are expected to be With Statement Context
+Managers.
+
+The objects "sys.stdin", "sys.stdout" and "sys.stderr" are initialized
+to file objects corresponding to the interpreter’s standard input,
+output and error streams; they are all open in text mode and therefore
+follow the interface defined by the "io.TextIOBase" abstract class.
+
+file.read(size=-1, /)
+
+   Retrieve up to *size* data from the file. As a convenience if
+   *size* is unspecified or -1 retrieve all data available.
+
+file.write(data, /)
+
+   Store *data* to the file.
+
+file.close()
+
+   Flush any buffers and close the underlying file.
+
+
+Internal types
+==============
+
+A few types used internally by the interpreter are exposed to the
+user. Their definitions may change with future versions of the
+interpreter, but they are mentioned here for completeness.
+
+
+Code objects
+------------
+
+Code objects represent *byte-compiled* executable Python code, or
+*bytecode*. The difference between a code object and a function object
+is that the function object contains an explicit reference to the
+function’s globals (the module in which it was defined), while a code
+object contains no context; also the default argument values are
+stored in the function object, not in the code object (because they
+represent values calculated at run-time).  Unlike function objects,
+code objects are immutable and contain no references (directly or
+indirectly) to mutable objects.
+
+
+Special read-only attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_name                                 | The function name                                  |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_qualname                             | The fully qualified function name  Added in        |
+|                                                    | version 3.11.                                      |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_argcount                             | The total number of positional *parameters*        |
+|                                                    | (including positional-only parameters and          |
+|                                                    | parameters with default values) that the function  |
+|                                                    | has                                                |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_posonlyargcount                      | The number of positional-only *parameters*         |
+|                                                    | (including arguments with default values) that the |
+|                                                    | function has                                       |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_kwonlyargcount                       | The number of keyword-only *parameters* (including |
+|                                                    | arguments with default values) that the function   |
+|                                                    | has                                                |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_nlocals                              | The number of local variables used by the function |
+|                                                    | (including parameters)                             |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_varnames                             | A "tuple" containing the names of the local        |
+|                                                    | variables in the function (starting with the       |
+|                                                    | parameter names)                                   |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_cellvars                             | A "tuple" containing the names of local variables  |
+|                                                    | that are referenced from at least one *nested      |
+|                                                    | scope* inside the function                         |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_freevars                             | A "tuple" containing the names of *free (closure)  |
+|                                                    | variables* that a *nested scope* references in an  |
+|                                                    | outer scope. See also "function.__closure__".      |
+|                                                    | Note: references to global and builtin names are   |
+|                                                    | *not* included.                                    |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_code                                 | A string representing the sequence of *bytecode*   |
+|                                                    | instructions in the function                       |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_consts                               | A "tuple" containing the literals used by the      |
+|                                                    | *bytecode* in the function                         |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_names                                | A "tuple" containing the names used by the         |
+|                                                    | *bytecode* in the function                         |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_filename                             | The name of the file from which the code was       |
+|                                                    | compiled                                           |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_firstlineno                          | The line number of the first line of the function  |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_lnotab                               | A string encoding the mapping from *bytecode*      |
+|                                                    | offsets to line numbers. For details, see the      |
+|                                                    | source code of the interpreter.  Deprecated since  |
+|                                                    | version 3.12: This attribute of code objects is    |
+|                                                    | deprecated, and may be removed in Python 3.15.     |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_stacksize                            | The required stack size of the code object         |
++----------------------------------------------------+----------------------------------------------------+
+| codeobject.co_flags                                | An "integer" encoding a number of flags for the    |
+|                                                    | interpreter.                                       |
++----------------------------------------------------+----------------------------------------------------+
+
+The following flag bits are defined for "co_flags": bit "0x04" is set
+if the function uses the "*arguments" syntax to accept an arbitrary
+number of positional arguments; bit "0x08" is set if the function uses
+the "**keywords" syntax to accept arbitrary keyword arguments; bit
+"0x20" is set if the function is a generator. See Code Objects Bit
+Flags for details on the semantics of each flags that might be
+present.
+
+Future feature declarations (for example, "from __future__ import
+division") also use bits in "co_flags" to indicate whether a code
+object was compiled with a particular feature enabled. See
+"compiler_flag".
+
+Other bits in "co_flags" are reserved for internal use.
+
+If a code object represents a function and has a docstring, the
+"CO_HAS_DOCSTRING" bit is set in "co_flags" and the first item in
+"co_consts" is the docstring of the function.
+
+
+Methods on code objects
+~~~~~~~~~~~~~~~~~~~~~~~
+
+codeobject.co_positions()
+
+   Returns an iterable over the source code positions of each
+   *bytecode* instruction in the code object.
+
+   The iterator returns "tuple"s containing the "(start_line,
+   end_line, start_column, end_column)". The *i-th* tuple corresponds
+   to the position of the source code that compiled to the *i-th* code
+   unit. Column information is 0-indexed utf-8 byte offsets on the
+   given source line.
+
+   This positional information can be missing. A non-exhaustive lists
+   of cases where this may happen:
+
+   * Running the interpreter with "-X" "no_debug_ranges".
+
+   * Loading a pyc file compiled while using "-X" "no_debug_ranges".
+
+   * Position tuples corresponding to artificial instructions.
+
+   * Line and column numbers that can’t be represented due to
+     implementation specific limitations.
+
+   When this occurs, some or all of the tuple elements can be "None".
+
+   Added in version 3.11.
+
+   Note:
+
+     This feature requires storing column positions in code objects
+     which may result in a small increase of disk usage of compiled
+     Python files or interpreter memory usage. To avoid storing the
+     extra information and/or deactivate printing the extra traceback
+     information, the "-X" "no_debug_ranges" command line flag or the
+     "PYTHONNODEBUGRANGES" environment variable can be used.
+
+codeobject.co_lines()
+
+   Returns an iterator that yields information about successive ranges
+   of *bytecode*s. Each item yielded is a "(start, end, lineno)"
+   "tuple":
+
+   * "start" (an "int") represents the offset (inclusive) of the start
+     of the *bytecode* range
+
+   * "end" (an "int") represents the offset (exclusive) of the end of
+     the *bytecode* range
+
+   * "lineno" is an "int" representing the line number of the
+     *bytecode* range, or "None" if the bytecodes in the given range
+     have no line number
+
+   The items yielded will have the following properties:
+
+   * The first range yielded will have a "start" of 0.
+
+   * The "(start, end)" ranges will be non-decreasing and consecutive.
+     That is, for any pair of "tuple"s, the "start" of the second will
+     be equal to the "end" of the first.
+
+   * No range will be backwards: "end >= start" for all triples.
+
+   * The last "tuple" yielded will have "end" equal to the size of the
+     *bytecode*.
+
+   Zero-width ranges, where "start == end", are allowed. Zero-width
+   ranges are used for lines that are present in the source code, but
+   have been eliminated by the *bytecode* compiler.
+
+   Added in version 3.10.
+
+   See also:
+
+     **PEP 626** - Precise line numbers for debugging and other tools.
+        The PEP that introduced the "co_lines()" method.
+
+codeobject.replace(**kwargs)
+
+   Return a copy of the code object with new values for the specified
+   fields.
+
+   Code objects are also supported by the generic function
+   "copy.replace()".
+
+   Added in version 3.8.
+
+
+Frame objects
+-------------
+
+Frame objects represent execution frames.  They may occur in traceback
+objects, and are also passed to registered trace functions.
+
+
+Special read-only attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_back                                       | Points to the previous stack frame (towards the    |
+|                                                    | caller), or "None" if this is the bottom stack     |
+|                                                    | frame                                              |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_code                                       | The code object being executed in this frame.      |
+|                                                    | Accessing this attribute raises an auditing event  |
+|                                                    | "object.__getattr__" with arguments "obj" and      |
+|                                                    | ""f_code"".                                        |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_locals                                     | The mapping used by the frame to look up local     |
+|                                                    | variables. If the frame refers to an *optimized    |
+|                                                    | scope*, this may return a write-through proxy      |
+|                                                    | object.  Changed in version 3.13: Return a proxy   |
+|                                                    | for optimized scopes.                              |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_globals                                    | The dictionary used by the frame to look up global |
+|                                                    | variables                                          |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_builtins                                   | The dictionary used by the frame to look up built- |
+|                                                    | in (intrinsic) names                               |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_lasti                                      | The “precise instruction” of the frame object      |
+|                                                    | (this is an index into the *bytecode* string of    |
+|                                                    | the code object)                                   |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_generator                                  | The *generator* or *coroutine* object that owns    |
+|                                                    | this frame, or "None" if the frame is a normal     |
+|                                                    | function.  Added in version 3.14.                  |
++----------------------------------------------------+----------------------------------------------------+
+
+
+Special writable attributes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_trace                                      | If not "None", this is a function called for       |
+|                                                    | various events during code execution (this is used |
+|                                                    | by debuggers). Normally an event is triggered for  |
+|                                                    | each new source line (see "f_trace_lines").        |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_trace_lines                                | Set this attribute to "False" to disable           |
+|                                                    | triggering a tracing event for each source line.   |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_trace_opcodes                              | Set this attribute to "True" to allow per-opcode   |
+|                                                    | events to be requested. Note that this may lead to |
+|                                                    | undefined interpreter behaviour if exceptions      |
+|                                                    | raised by the trace function escape to the         |
+|                                                    | function being traced.                             |
++----------------------------------------------------+----------------------------------------------------+
+| frame.f_lineno                                     | The current line number of the frame – writing to  |
+|                                                    | this from within a trace function jumps to the     |
+|                                                    | given line (only for the bottom-most frame).  A    |
+|                                                    | debugger can implement a Jump command (aka Set     |
+|                                                    | Next Statement) by writing to this attribute.      |
++----------------------------------------------------+----------------------------------------------------+
+
+
+Frame object methods
+~~~~~~~~~~~~~~~~~~~~
+
+Frame objects support one method:
+
+frame.clear()
+
+   This method clears all references to local variables held by the
+   frame.  Also, if the frame belonged to a *generator*, the generator
+   is finalized.  This helps break reference cycles involving frame
+   objects (for example when catching an exception and storing its
+   traceback for later use).
+
+   "RuntimeError" is raised if the frame is currently executing or
+   suspended.
+
+   Added in version 3.4.
+
+   Changed in version 3.13: Attempting to clear a suspended frame
+   raises "RuntimeError" (as has always been the case for executing
+   frames).
+
+
+Traceback objects
+-----------------
+
+Traceback objects represent the stack trace of an exception. A
+traceback object is implicitly created when an exception occurs, and
+may also be explicitly created by calling "types.TracebackType".
+
+Changed in version 3.7: Traceback objects can now be explicitly
+instantiated from Python code.
+
+For implicitly created tracebacks, when the search for an exception
+handler unwinds the execution stack, at each unwound level a traceback
+object is inserted in front of the current traceback.  When an
+exception handler is entered, the stack trace is made available to the
+program. (See section The try statement.) It is accessible as the
+third item of the tuple returned by "sys.exc_info()", and as the
+"__traceback__" attribute of the caught exception.
+
+When the program contains no suitable handler, the stack trace is
+written (nicely formatted) to the standard error stream; if the
+interpreter is interactive, it is also made available to the user as
+"sys.last_traceback".
+
+For explicitly created tracebacks, it is up to the creator of the
+traceback to determine how the "tb_next" attributes should be linked
+to form a full stack trace.
+
+Special read-only attributes:
+
++----------------------------------------------------+----------------------------------------------------+
+| traceback.tb_frame                                 | Points to the execution frame of the current       |
+|                                                    | level.  Accessing this attribute raises an         |
+|                                                    | auditing event "object.__getattr__" with arguments |
+|                                                    | "obj" and ""tb_frame"".                            |
++----------------------------------------------------+----------------------------------------------------+
+| traceback.tb_lineno                                | Gives the line number where the exception occurred |
++----------------------------------------------------+----------------------------------------------------+
+| traceback.tb_lasti                                 | Indicates the “precise instruction”.               |
++----------------------------------------------------+----------------------------------------------------+
+
+The line number and last instruction in the traceback may differ from
+the line number of its frame object if the exception occurred in a
+"try" statement with no matching except clause or with a "finally"
+clause.
+
+traceback.tb_next
+
+   The special writable attribute "tb_next" is the next level in the
+   stack trace (towards the frame where the exception occurred), or
+   "None" if there is no next level.
+
+   Changed in version 3.7: This attribute is now writable
+
+
+Slice objects
+-------------
+
+Slice objects are used to represent slices for "__getitem__()"
+methods.  They are also created by the built-in "slice()" function.
+
+Special read-only attributes: "start" is the lower bound; "stop" is
+the upper bound; "step" is the step value; each is "None" if omitted.
+These attributes can have any type.
+
+Slice objects support one method:
+
+slice.indices(self, length)
+
+   This method takes a single integer argument *length* and computes
+   information about the slice that the slice object would describe if
+   applied to a sequence of *length* items.  It returns a tuple of
+   three integers; respectively these are the *start* and *stop*
+   indices and the *step* or stride length of the slice. Missing or
+   out-of-bounds indices are handled in a manner consistent with
+   regular slices.
+
+
+Static method objects
+---------------------
+
+Static method objects provide a way of defeating the transformation of
+function objects to method objects described above. A static method
+object is a wrapper around any other object, usually a user-defined
+method object. When a static method object is retrieved from a class
+or a class instance, the object actually returned is the wrapped
+object, which is not subject to any further transformation. Static
+method objects are also callable. Static method objects are created by
+the built-in "staticmethod()" constructor.
+
+
+Class method objects
+--------------------
+
+A class method object, like a static method object, is a wrapper
+around another object that alters the way in which that object is
+retrieved from classes and class instances. The behaviour of class
+method objects upon such retrieval is described above, under “instance
+methods”. Class method objects are created by the built-in
+"classmethod()" constructor.
+''',
+    'typesfunctions': r'''Functions
+*********
+
+Function objects are created by function definitions.  The only
+operation on a function object is to call it: "func(argument-list)".
+
+There are really two flavors of function objects: built-in functions
+and user-defined functions.  Both support the same operation (to call
+the function), but the implementation is different, hence the
+different object types.
+
+See Function definitions for more information.
+''',
+    'typesmapping': r'''Mapping Types — "dict"
+**********************
+
+A *mapping* object maps *hashable* values to arbitrary objects.
+Mappings are mutable objects.  There is currently only one standard
+mapping type, the *dictionary*.  (For other containers see the built-
+in "list", "set", and "tuple" classes, and the "collections" module.)
+
+A dictionary’s keys are *almost* arbitrary values.  Values that are
+not *hashable*, that is, values containing lists, dictionaries or
+other mutable types (that are compared by value rather than by object
+identity) may not be used as keys. Values that compare equal (such as
+"1", "1.0", and "True") can be used interchangeably to index the same
+dictionary entry.
+
+class dict(**kwargs)
+class dict(mapping, /, **kwargs)
+class dict(iterable, /, **kwargs)
+
+   Return a new dictionary initialized from an optional positional
+   argument and a possibly empty set of keyword arguments.
+
+   Dictionaries can be created by several means:
+
+   * Use a comma-separated list of "key: value" pairs within braces:
+     "{'jack': 4098, 'sjoerd': 4127}" or "{4098: 'jack', 4127:
+     'sjoerd'}"
+
+   * Use a dict comprehension: "{}", "{x: x ** 2 for x in range(10)}"
+
+   * Use the type constructor: "dict()", "dict([('foo', 100), ('bar',
+     200)])", "dict(foo=100, bar=200)"
+
+   If no positional argument is given, an empty dictionary is created.
+   If a positional argument is given and it defines a "keys()" method,
+   a dictionary is created by calling "__getitem__()" on the argument
+   with each returned key from the method.  Otherwise, the positional
+   argument must be an *iterable* object.  Each item in the iterable
+   must itself be an iterable with exactly two elements.  The first
+   element of each item becomes a key in the new dictionary, and the
+   second element the corresponding value.  If a key occurs more than
+   once, the last value for that key becomes the corresponding value
+   in the new dictionary.
+
+   If keyword arguments are given, the keyword arguments and their
+   values are added to the dictionary created from the positional
+   argument.  If a key being added is already present, the value from
+   the keyword argument replaces the value from the positional
+   argument.
+
+   Dictionaries compare equal if and only if they have the same "(key,
+   value)" pairs (regardless of ordering). Order comparisons (‘<’,
+   ‘<=’, ‘>=’, ‘>’) raise "TypeError".  To illustrate dictionary
+   creation and equality, the following examples all return a
+   dictionary equal to "{"one": 1, "two": 2, "three": 3}":
+
+      >>> a = dict(one=1, two=2, three=3)
+      >>> b = {'one': 1, 'two': 2, 'three': 3}
+      >>> c = dict(zip(['one', 'two', 'three'], [1, 2, 3]))
+      >>> d = dict([('two', 2), ('one', 1), ('three', 3)])
+      >>> e = dict({'three': 3, 'one': 1, 'two': 2})
+      >>> f = dict({'one': 1, 'three': 3}, two=2)
+      >>> a == b == c == d == e == f
+      True
+
+   Providing keyword arguments as in the first example only works for
+   keys that are valid Python identifiers.  Otherwise, any valid keys
+   can be used.
+
+   Dictionaries preserve insertion order.  Note that updating a key
+   does not affect the order.  Keys added after deletion are inserted
+   at the end.
+
+      >>> d = {"one": 1, "two": 2, "three": 3, "four": 4}
+      >>> d
+      {'one': 1, 'two': 2, 'three': 3, 'four': 4}
+      >>> list(d)
+      ['one', 'two', 'three', 'four']
+      >>> list(d.values())
+      [1, 2, 3, 4]
+      >>> d["one"] = 42
+      >>> d
+      {'one': 42, 'two': 2, 'three': 3, 'four': 4}
+      >>> del d["two"]
+      >>> d["two"] = None
+      >>> d
+      {'one': 42, 'three': 3, 'four': 4, 'two': None}
+
+   Changed in version 3.7: Dictionary order is guaranteed to be
+   insertion order.  This behavior was an implementation detail of
+   CPython from 3.6.
+
+   These are the operations that dictionaries support (and therefore,
+   custom mapping types should support too):
+
+   list(d)
+
+      Return a list of all the keys used in the dictionary *d*.
+
+   len(d)
+
+      Return the number of items in the dictionary *d*.
+
+   d[key]
+
+      Return the item of *d* with key *key*.  Raises a "KeyError" if
+      *key* is not in the map.
+
+      If a subclass of dict defines a method "__missing__()" and *key*
+      is not present, the "d[key]" operation calls that method with
+      the key *key* as argument.  The "d[key]" operation then returns
+      or raises whatever is returned or raised by the
+      "__missing__(key)" call. No other operations or methods invoke
+      "__missing__()". If "__missing__()" is not defined, "KeyError"
+      is raised. "__missing__()" must be a method; it cannot be an
+      instance variable:
+
+         >>> class Counter(dict):
+         ...     def __missing__(self, key):
+         ...         return 0
+         ...
+         >>> c = Counter()
+         >>> c['red']
+         0
+         >>> c['red'] += 1
+         >>> c['red']
+         1
+
+      The example above shows part of the implementation of
+      "collections.Counter". A different "__missing__()" method is
+      used by "collections.defaultdict".
+
+   d[key] = value
+
+      Set "d[key]" to *value*.
+
+   del d[key]
+
+      Remove "d[key]" from *d*.  Raises a "KeyError" if *key* is not
+      in the map.
+
+   key in d
+
+      Return "True" if *d* has a key *key*, else "False".
+
+   key not in d
+
+      Equivalent to "not key in d".
+
+   iter(d)
+
+      Return an iterator over the keys of the dictionary.  This is a
+      shortcut for "iter(d.keys())".
+
+   clear()
+
+      Remove all items from the dictionary.
+
+   copy()
+
+      Return a shallow copy of the dictionary.
+
+   classmethod fromkeys(iterable, value=None, /)
+
+      Create a new dictionary with keys from *iterable* and values set
+      to *value*.
+
+      "fromkeys()" is a class method that returns a new dictionary.
+      *value* defaults to "None".  All of the values refer to just a
+      single instance, so it generally doesn’t make sense for *value*
+      to be a mutable object such as an empty list.  To get distinct
+      values, use a dict comprehension instead.
+
+   get(key, default=None, /)
+
+      Return the value for *key* if *key* is in the dictionary, else
+      *default*. If *default* is not given, it defaults to "None", so
+      that this method never raises a "KeyError".
+
+   items()
+
+      Return a new view of the dictionary’s items ("(key, value)"
+      pairs). See the documentation of view objects.
+
+   keys()
+
+      Return a new view of the dictionary’s keys.  See the
+      documentation of view objects.
+
+   pop(key, /)
+   pop(key, default, /)
+
+      If *key* is in the dictionary, remove it and return its value,
+      else return *default*.  If *default* is not given and *key* is
+      not in the dictionary, a "KeyError" is raised.
+
+   popitem()
+
+      Remove and return a "(key, value)" pair from the dictionary.
+      Pairs are returned in LIFO (last-in, first-out) order.
+
+      "popitem()" is useful to destructively iterate over a
+      dictionary, as often used in set algorithms.  If the dictionary
+      is empty, calling "popitem()" raises a "KeyError".
+
+      Changed in version 3.7: LIFO order is now guaranteed. In prior
+      versions, "popitem()" would return an arbitrary key/value pair.
+
+   reversed(d)
+
+      Return a reverse iterator over the keys of the dictionary. This
+      is a shortcut for "reversed(d.keys())".
+
+      Added in version 3.8.
+
+   setdefault(key, default=None, /)
+
+      If *key* is in the dictionary, return its value.  If not, insert
+      *key* with a value of *default* and return *default*.  *default*
+      defaults to "None".
+
+   update(**kwargs)
+   update(mapping, /, **kwargs)
+   update(iterable, /, **kwargs)
+
+      Update the dictionary with the key/value pairs from *mapping* or
+      *iterable* and *kwargs*, overwriting existing keys.  Return
+      "None".
+
+      "update()" accepts either another object with a "keys()" method
+      (in which case "__getitem__()" is called with every key returned
+      from the method) or an iterable of key/value pairs (as tuples or
+      other iterables of length two). If keyword arguments are
+      specified, the dictionary is then updated with those key/value
+      pairs: "d.update(red=1, blue=2)".
+
+   values()
+
+      Return a new view of the dictionary’s values.  See the
+      documentation of view objects.
+
+      An equality comparison between one "dict.values()" view and
+      another will always return "False". This also applies when
+      comparing "dict.values()" to itself:
+
+         >>> d = {'a': 1}
+         >>> d.values() == d.values()
+         False
+
+   d | other
+
+      Create a new dictionary with the merged keys and values of *d*
+      and *other*, which must both be dictionaries. The values of
+      *other* take priority when *d* and *other* share keys.
+
+      Added in version 3.9.
+
+   d |= other
+
+      Update the dictionary *d* with keys and values from *other*,
+      which may be either a *mapping* or an *iterable* of key/value
+      pairs. The values of *other* take priority when *d* and *other*
+      share keys.
+
+      Added in version 3.9.
+
+   Dictionaries and dictionary views are reversible.
+
+      >>> d = {"one": 1, "two": 2, "three": 3, "four": 4}
+      >>> d
+      {'one': 1, 'two': 2, 'three': 3, 'four': 4}
+      >>> list(reversed(d))
+      ['four', 'three', 'two', 'one']
+      >>> list(reversed(d.values()))
+      [4, 3, 2, 1]
+      >>> list(reversed(d.items()))
+      [('four', 4), ('three', 3), ('two', 2), ('one', 1)]
+
+   Changed in version 3.8: Dictionaries are now reversible.
+
+See also:
+
+  "types.MappingProxyType" can be used to create a read-only view of a
+  "dict".
+
+See also:
+
+  For detailed information on thread-safety guarantees for "dict"
+  objects, see Thread safety for dict objects.
+
+
+Dictionary view objects
+=======================
+
+The objects returned by "dict.keys()", "dict.values()" and
+"dict.items()" are *view objects*.  They provide a dynamic view on the
+dictionary’s entries, which means that when the dictionary changes,
+the view reflects these changes.
+
+Dictionary views can be iterated over to yield their respective data,
+and support membership tests:
+
+len(dictview)
+
+   Return the number of entries in the dictionary.
+
+iter(dictview)
+
+   Return an iterator over the keys, values or items (represented as
+   tuples of "(key, value)") in the dictionary.
+
+   Keys and values are iterated over in insertion order. This allows
+   the creation of "(value, key)" pairs using "zip()": "pairs =
+   zip(d.values(), d.keys())".  Another way to create the same list is
+   "pairs = [(v, k) for (k, v) in d.items()]".
+
+   Iterating views while adding or deleting entries in the dictionary
+   may raise a "RuntimeError" or fail to iterate over all entries.
+
+   Changed in version 3.7: Dictionary order is guaranteed to be
+   insertion order.
+
+x in dictview
+
+   Return "True" if *x* is in the underlying dictionary’s keys, values
+   or items (in the latter case, *x* should be a "(key, value)"
+   tuple).
+
+reversed(dictview)
+
+   Return a reverse iterator over the keys, values or items of the
+   dictionary. The view will be iterated in reverse order of the
+   insertion.
+
+   Changed in version 3.8: Dictionary views are now reversible.
+
+dictview.mapping
+
+   Return a "types.MappingProxyType" that wraps the original
+   dictionary to which the view refers.
+
+   Added in version 3.10.
+
+Keys views are set-like since their entries are unique and *hashable*.
+Items views also have set-like operations since the (key, value) pairs
+are unique and the keys are hashable. If all values in an items view
+are hashable as well, then the items view can interoperate with other
+sets. (Values views are not treated as set-like since the entries are
+generally not unique.)  For set-like views, all of the operations
+defined for the abstract base class "collections.abc.Set" are
+available (for example, "==", "<", or "^").  While using set
+operators, set-like views accept any iterable as the other operand,
+unlike sets which only accept sets as the input.
+
+An example of dictionary view usage:
+
+   >>> dishes = {'eggs': 2, 'sausage': 1, 'bacon': 1, 'spam': 500}
+   >>> keys = dishes.keys()
+   >>> values = dishes.values()
+
+   >>> # iteration
+   >>> n = 0
+   >>> for val in values:
+   ...     n += val
+   ...
+   >>> print(n)
+   504
+
+   >>> # keys and values are iterated over in the same order (insertion order)
+   >>> list(keys)
+   ['eggs', 'sausage', 'bacon', 'spam']
+   >>> list(values)
+   [2, 1, 1, 500]
+
+   >>> # view objects are dynamic and reflect dict changes
+   >>> del dishes['eggs']
+   >>> del dishes['sausage']
+   >>> list(keys)
+   ['bacon', 'spam']
+
+   >>> # set operations
+   >>> keys & {'eggs', 'bacon', 'salad'}
+   {'bacon'}
+   >>> keys ^ {'sausage', 'juice'} == {'juice', 'sausage', 'bacon', 'spam'}
+   True
+   >>> keys | ['juice', 'juice', 'juice'] == {'bacon', 'spam', 'juice'}
+   True
+
+   >>> # get back a read-only proxy for the original dictionary
+   >>> values.mapping
+   mappingproxy({'bacon': 1, 'spam': 500})
+   >>> values.mapping['spam']
+   500
+''',
+    'typesmethods': r'''Methods
+*******
+
+Methods are functions that are called using the attribute notation.
+There are two flavors: built-in methods (such as "append()" on lists)
+and class instance method. Built-in methods are described with the
+types that support them.
+
+If you access a method (a function defined in a class namespace)
+through an instance, you get a special object: a *bound method* (also
+called instance method) object. When called, it will add the "self"
+argument to the argument list.  Bound methods have two special read-
+only attributes: "m.__self__" is the object on which the method
+operates, and "m.__func__" is the function implementing the method.
+Calling "m(arg-1, arg-2, ..., arg-n)" is completely equivalent to
+calling "m.__func__(m.__self__, arg-1, arg-2, ..., arg-n)".
+
+Like function objects, bound method objects support getting arbitrary
+attributes.  However, since method attributes are actually stored on
+the underlying function object ("method.__func__"), setting method
+attributes on bound methods is disallowed.  Attempting to set an
+attribute on a method results in an "AttributeError" being raised.  In
+order to set a method attribute, you need to explicitly set it on the
+underlying function object:
+
+   >>> class C:
+   ...     def method(self):
+   ...         pass
+   ...
+   >>> c = C()
+   >>> c.method.whoami = 'my name is method'  # can't set on the method
+   Traceback (most recent call last):
+     File "<stdin>", line 1, in <module>
+   AttributeError: 'method' object has no attribute 'whoami'
+   >>> c.method.__func__.whoami = 'my name is method'
+   >>> c.method.whoami
+   'my name is method'
+
+See Instance methods for more information.
+''',
+    'typesmodules': r'''Modules
+*******
+
+The only special operation on a module is attribute access: "m.name",
+where *m* is a module and *name* accesses a name defined in *m*’s
+symbol table. Module attributes can be assigned to.  (Note that the
+"import" statement is not, strictly speaking, an operation on a module
+object; "import foo" does not require a module object named *foo* to
+exist, rather it requires an (external) *definition* for a module
+named *foo* somewhere.)
+
+A special attribute of every module is "__dict__". This is the
+dictionary containing the module’s symbol table. Modifying this
+dictionary will actually change the module’s symbol table, but direct
+assignment to the "__dict__" attribute is not possible (you can write
+"m.__dict__['a'] = 1", which defines "m.a" to be "1", but you can’t
+write "m.__dict__ = {}").  Modifying "__dict__" directly is not
+recommended.
+
+Modules built into the interpreter are written like this: "<module
+'sys' (built-in)>".  If loaded from a file, they are written as
+"<module 'os' from '/usr/local/lib/pythonX.Y/os.pyc'>".
+''',
+    'typesseq': r'''Sequence Types — "list", "tuple", "range"
+*****************************************
+
+There are three basic sequence types: lists, tuples, and range
+objects. Additional sequence types tailored for processing of binary
+data and text strings are described in dedicated sections.
+
+
+Common Sequence Operations
+==========================
+
+The operations in the following table are supported by most sequence
+types, both mutable and immutable. The "collections.abc.Sequence" ABC
+is provided to make it easier to correctly implement these operations
+on custom sequence types.
+
+This table lists the sequence operations sorted in ascending priority.
+In the table, *s* and *t* are sequences of the same type, *n*, *i*,
+*j* and *k* are integers and *x* is an arbitrary object that meets any
+type and value restrictions imposed by *s*.
+
+The "in" and "not in" operations have the same priorities as the
+comparison operations. The "+" (concatenation) and "*" (repetition)
+operations have the same priority as the corresponding numeric
+operations. [3]
+
++----------------------------+----------------------------------+------------+
+| Operation                  | Result                           | Notes      |
+|============================|==================================|============|
+| "x in s"                   | "True" if an item of *s* is      | (1)        |
+|                            | equal to *x*, else "False"       |            |
++----------------------------+----------------------------------+------------+
+| "x not in s"               | "False" if an item of *s* is     | (1)        |
+|                            | equal to *x*, else "True"        |            |
++----------------------------+----------------------------------+------------+
+| "s + t"                    | the concatenation of *s* and *t* | (6)(7)     |
++----------------------------+----------------------------------+------------+
+| "s * n" or "n * s"         | equivalent to adding *s* to      | (2)(7)     |
+|                            | itself *n* times                 |            |
++----------------------------+----------------------------------+------------+
+| "s[i]"                     | *i*th item of *s*, origin 0      | (3)(8)     |
++----------------------------+----------------------------------+------------+
+| "s[i:j]"                   | slice of *s* from *i* to *j*     | (3)(4)     |
++----------------------------+----------------------------------+------------+
+| "s[i:j:k]"                 | slice of *s* from *i* to *j*     | (3)(5)     |
+|                            | with step *k*                    |            |
++----------------------------+----------------------------------+------------+
+| "len(s)"                   | length of *s*                    |            |
++----------------------------+----------------------------------+------------+
+| "min(s)"                   | smallest item of *s*             |            |
++----------------------------+----------------------------------+------------+
+| "max(s)"                   | largest item of *s*              |            |
++----------------------------+----------------------------------+------------+
+
+Sequences of the same type also support comparisons.  In particular,
+tuples and lists are compared lexicographically by comparing
+corresponding elements. This means that to compare equal, every
+element must compare equal and the two sequences must be of the same
+type and have the same length.  (For full details see Comparisons in
+the language reference.)
+
+Forward and reversed iterators over mutable sequences access values
+using an index.  That index will continue to march forward (or
+backward) even if the underlying sequence is mutated.  The iterator
+terminates only when an "IndexError" or a "StopIteration" is
+encountered (or when the index drops below zero).
+
+Notes:
+
+1. While the "in" and "not in" operations are used only for simple
+   containment testing in the general case, some specialised sequences
+   (such as "str", "bytes" and "bytearray") also use them for
+   subsequence testing:
+
+      >>> "gg" in "eggs"
+      True
+
+2. Values of *n* less than "0" are treated as "0" (which yields an
+   empty sequence of the same type as *s*).  Note that items in the
+   sequence *s* are not copied; they are referenced multiple times.
+   This often haunts new Python programmers; consider:
+
+      >>> lists = [[]] * 3
+      >>> lists
+      [[], [], []]
+      >>> lists[0].append(3)
+      >>> lists
+      [[3], [3], [3]]
+
+   What has happened is that "[[]]" is a one-element list containing
+   an empty list, so all three elements of "[[]] * 3" are references
+   to this single empty list.  Modifying any of the elements of
+   "lists" modifies this single list. You can create a list of
+   different lists this way:
+
+      >>> lists = [[] for i in range(3)]
+      >>> lists[0].append(3)
+      >>> lists[1].append(5)
+      >>> lists[2].append(7)
+      >>> lists
+      [[3], [5], [7]]
+
+   Further explanation is available in the FAQ entry How do I create a
+   multidimensional list?.
+
+3. If *i* or *j* is negative, the index is relative to the end of
+   sequence *s*: "len(s) + i" or "len(s) + j" is substituted.  But
+   note that "-0" is still "0".
+
+4. The slice of *s* from *i* to *j* is defined as the sequence of
+   items with index *k* such that "i <= k < j".
+
+   * If *i* is omitted or "None", use "0".
+
+   * If *j* is omitted or "None", use "len(s)".
+
+   * If *i* or *j* is less than "-len(s)", use "0".
+
+   * If *i* or *j* is greater than "len(s)", use "len(s)".
+
+   * If *i* is greater than or equal to *j*, the slice is empty.
+
+5. The slice of *s* from *i* to *j* with step *k* is defined as the
+   sequence of items with index  "x = i + n*k" such that "0 <= n <
+   (j-i)/k".  In other words, the indices are "i", "i+k", "i+2*k",
+   "i+3*k" and so on, stopping when *j* is reached (but never
+   including *j*).  When *k* is positive, *i* and *j* are reduced to
+   "len(s)" if they are greater. When *k* is negative, *i* and *j* are
+   reduced to "len(s) - 1" if they are greater.  If *i* or *j* are
+   omitted or "None", they become “end” values (which end depends on
+   the sign of *k*).  Note, *k* cannot be zero. If *k* is "None", it
+   is treated like "1".
+
+6. Concatenating immutable sequences always results in a new object.
+   This means that building up a sequence by repeated concatenation
+   will have a quadratic runtime cost in the total sequence length.
+   To get a linear runtime cost, you must switch to one of the
+   alternatives below:
+
+   * if concatenating "str" objects, you can build a list and use
+     "str.join()" at the end or else write to an "io.StringIO"
+     instance and retrieve its value when complete
+
+   * if concatenating "bytes" objects, you can similarly use
+     "bytes.join()" or "io.BytesIO", or you can do in-place
+     concatenation with a "bytearray" object.  "bytearray" objects are
+     mutable and have an efficient overallocation mechanism
+
+   * if concatenating "tuple" objects, extend a "list" instead
+
+   * for other types, investigate the relevant class documentation
+
+7. Some sequence types (such as "range") only support item sequences
+   that follow specific patterns, and hence don’t support sequence
+   concatenation or repetition.
+
+8. An "IndexError" is raised if *i* is outside the sequence range.
+
+-[ Sequence Methods ]-
+
+Sequence types also support the following methods:
+
+sequence.count(value, /)
+
+   Return the total number of occurrences of *value* in *sequence*.
+
+sequence.index(value[, start[, stop]])
+
+   Return the index of the first occurrence of *value* in *sequence*.
+
+   Raises "ValueError" if *value* is not found in *sequence*.
+
+   The *start* or *stop* arguments allow for efficient searching of
+   subsections of the sequence, beginning at *start* and ending at
+   *stop*. This is roughly equivalent to "start +
+   sequence[start:stop].index(value)", only without copying any data.
+
+   Caution:
+
+     Not all sequence types support passing the *start* and *stop*
+     arguments.
+
+
+Immutable Sequence Types
+========================
+
+The only operation that immutable sequence types generally implement
+that is not also implemented by mutable sequence types is support for
+the "hash()" built-in.
+
+This support allows immutable sequences, such as "tuple" instances, to
+be used as "dict" keys and stored in "set" and "frozenset" instances.
+
+Attempting to hash an immutable sequence that contains unhashable
+values will result in "TypeError".
+
+
+Mutable Sequence Types
+======================
+
+The operations in the following table are defined on mutable sequence
+types. The "collections.abc.MutableSequence" ABC is provided to make
+it easier to correctly implement these operations on custom sequence
+types.
+
+In the table *s* is an instance of a mutable sequence type, *t* is any
+iterable object and *x* is an arbitrary object that meets any type and
+value restrictions imposed by *s* (for example, "bytearray" only
+accepts integers that meet the value restriction "0 <= x <= 255").
+
++--------------------------------+----------------------------------+-----------------------+
+| Operation                      | Result                           | Notes                 |
+|================================|==================================|=======================|
+| "s[i] = x"                     | item *i* of *s* is replaced by   |                       |
+|                                | *x*                              |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i]"                     | removes item *i* of *s*          |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s[i:j] = t"                   | slice of *s* from *i* to *j* is  |                       |
+|                                | replaced by the contents of the  |                       |
+|                                | iterable *t*                     |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i:j]"                   | removes the elements of "s[i:j]" |                       |
+|                                | from the list (same as "s[i:j] = |                       |
+|                                | []")                             |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s[i:j:k] = t"                 | the elements of "s[i:j:k]" are   | (1)                   |
+|                                | replaced by those of *t*         |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i:j:k]"                 | removes the elements of          |                       |
+|                                | "s[i:j:k]" from the list         |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s += t"                       | extends *s* with the contents of |                       |
+|                                | *t* (for the most part the same  |                       |
+|                                | as "s[len(s):len(s)] = t")       |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s *= n"                       | updates *s* with its contents    | (2)                   |
+|                                | repeated *n* times               |                       |
++--------------------------------+----------------------------------+-----------------------+
+
+Notes:
+
+1. If *k* is not equal to "1", *t* must have the same length as the
+   slice it is replacing.
+
+2. The value *n* is an integer, or an object implementing
+   "__index__()".  Zero and negative values of *n* clear the sequence.
+   Items in the sequence are not copied; they are referenced multiple
+   times, as explained for "s * n" under Common Sequence Operations.
+
+-[ Mutable Sequence Methods ]-
+
+Mutable sequence types also support the following methods:
+
+sequence.append(value, /)
+
+   Append *value* to the end of the sequence. This is equivalent to
+   writing "seq[len(seq):len(seq)] = [value]".
+
+sequence.clear()
+
+   Added in version 3.3.
+
+   Remove all items from *sequence*. This is equivalent to writing
+   "del sequence[:]".
+
+sequence.copy()
+
+   Added in version 3.3.
+
+   Create a shallow copy of *sequence*. This is equivalent to writing
+   "sequence[:]".
+
+   Hint:
+
+     The "copy()" method is not part of the "MutableSequence" "ABC",
+     but most concrete mutable sequence types provide it.
+
+sequence.extend(iterable, /)
+
+   Extend *sequence* with the contents of *iterable*. For the most
+   part, this is the same as writing "seq[len(seq):len(seq)] =
+   iterable".
+
+sequence.insert(index, value, /)
+
+   Insert *value* into *sequence* at the given *index*. This is
+   equivalent to writing "sequence[index:index] = [value]".
+
+sequence.pop(index=-1, /)
+
+   Retrieve the item at *index* and also removes it from *sequence*.
+   By default, the last item in *sequence* is removed and returned.
+
+sequence.remove(value, /)
+
+   Remove the first item from *sequence* where "sequence[i] == value".
+
+   Raises "ValueError" if *value* is not found in *sequence*.
+
+sequence.reverse()
+
+   Reverse the items of *sequence* in place. This method maintains
+   economy of space when reversing a large sequence. To remind users
+   that it operates by side-effect, it returns "None".
+
+
+Lists
+=====
+
+Lists are mutable sequences, typically used to store collections of
+homogeneous items (where the precise degree of similarity will vary by
+application).
+
+class list(iterable=(), /)
+
+   Lists may be constructed in several ways:
+
+   * Using a pair of square brackets to denote the empty list: "[]"
+
+   * Using square brackets, separating items with commas: "[a]", "[a,
+     b, c]"
+
+   * Using a list comprehension: "[x for x in iterable]"
+
+   * Using the type constructor: "list()" or "list(iterable)"
+
+   The constructor builds a list whose items are the same and in the
+   same order as *iterable*’s items.  *iterable* may be either a
+   sequence, a container that supports iteration, or an iterator
+   object.  If *iterable* is already a list, a copy is made and
+   returned, similar to "iterable[:]". For example, "list('abc')"
+   returns "['a', 'b', 'c']" and "list( (1, 2, 3) )" returns "[1, 2,
+   3]". If no argument is given, the constructor creates a new empty
+   list, "[]".
+
+   Many other operations also produce lists, including the "sorted()"
+   built-in.
+
+   Lists implement all of the common and mutable sequence operations.
+   Lists also provide the following additional method:
+
+   sort(*, key=None, reverse=False)
+
+      This method sorts the list in place, using only "<" comparisons
+      between items. Exceptions are not suppressed - if any comparison
+      operations fail, the entire sort operation will fail (and the
+      list will likely be left in a partially modified state).
+
+      "sort()" accepts two arguments that can only be passed by
+      keyword (keyword-only arguments):
+
+      *key* specifies a function of one argument that is used to
+      extract a comparison key from each list element (for example,
+      "key=str.lower"). The key corresponding to each item in the list
+      is calculated once and then used for the entire sorting process.
+      The default value of "None" means that list items are sorted
+      directly without calculating a separate key value.
+
+      The "functools.cmp_to_key()" utility is available to convert a
+      2.x style *cmp* function to a *key* function.
+
+      *reverse* is a boolean value.  If set to "True", then the list
+      elements are sorted as if each comparison were reversed.
+
+      This method modifies the sequence in place for economy of space
+      when sorting a large sequence.  To remind users that it operates
+      by side effect, it does not return the sorted sequence (use
+      "sorted()" to explicitly request a new sorted list instance).
+
+      The "sort()" method is guaranteed to be stable.  A sort is
+      stable if it guarantees not to change the relative order of
+      elements that compare equal — this is helpful for sorting in
+      multiple passes (for example, sort by department, then by salary
+      grade).
+
+      For sorting examples and a brief sorting tutorial, see Sorting
+      Techniques.
+
+      **CPython implementation detail:** While a list is being sorted,
+      the effect of attempting to mutate, or even inspect, the list is
+      undefined.  The C implementation of Python makes the list appear
+      empty for the duration, and raises "ValueError" if it can detect
+      that the list has been mutated during a sort.
+
+See also:
+
+  For detailed information on thread-safety guarantees for "list"
+  objects, see Thread safety for list objects.
+
+
+Tuples
+======
+
+Tuples are immutable sequences, typically used to store collections of
+heterogeneous data (such as the 2-tuples produced by the "enumerate()"
+built-in). Tuples are also used for cases where an immutable sequence
+of homogeneous data is needed (such as allowing storage in a "set" or
+"dict" instance).
+
+class tuple(iterable=(), /)
+
+   Tuples may be constructed in a number of ways:
+
+   * Using a pair of parentheses to denote the empty tuple: "()"
+
+   * Using a trailing comma for a singleton tuple: "a," or "(a,)"
+
+   * Separating items with commas: "a, b, c" or "(a, b, c)"
+
+   * Using the "tuple()" built-in: "tuple()" or "tuple(iterable)"
+
+   The constructor builds a tuple whose items are the same and in the
+   same order as *iterable*’s items.  *iterable* may be either a
+   sequence, a container that supports iteration, or an iterator
+   object.  If *iterable* is already a tuple, it is returned
+   unchanged. For example, "tuple('abc')" returns "('a', 'b', 'c')"
+   and "tuple( [1, 2, 3] )" returns "(1, 2, 3)". If no argument is
+   given, the constructor creates a new empty tuple, "()".
+
+   Note that it is actually the comma which makes a tuple, not the
+   parentheses. The parentheses are optional, except in the empty
+   tuple case, or when they are needed to avoid syntactic ambiguity.
+   For example, "f(a, b, c)" is a function call with three arguments,
+   while "f((a, b, c))" is a function call with a 3-tuple as the sole
+   argument.
+
+   Tuples implement all of the common sequence operations.
+
+For heterogeneous collections of data where access by name is clearer
+than access by index, "collections.namedtuple()" may be a more
+appropriate choice than a simple tuple object.
+
+
+Ranges
+======
+
+The "range" type represents an immutable sequence of numbers and is
+commonly used for looping a specific number of times in "for" loops.
+
+class range(stop, /)
+class range(start, stop, step=1, /)
+
+   The arguments to the range constructor must be integers (either
+   built-in "int" or any object that implements the "__index__()"
+   special method).  If the *step* argument is omitted, it defaults to
+   "1". If the *start* argument is omitted, it defaults to "0". If
+   *step* is zero, "ValueError" is raised.
+
+   For a positive *step*, the contents of a range "r" are determined
+   by the formula "r[i] = start + step*i" where "i >= 0" and "r[i] <
+   stop".
+
+   For a negative *step*, the contents of the range are still
+   determined by the formula "r[i] = start + step*i", but the
+   constraints are "i >= 0" and "r[i] > stop".
+
+   A range object will be empty if "r[0]" does not meet the value
+   constraint. Ranges do support negative indices, but these are
+   interpreted as indexing from the end of the sequence determined by
+   the positive indices.
+
+   Ranges containing absolute values larger than "sys.maxsize" are
+   permitted but some features (such as "len()") may raise
+   "OverflowError".
+
+   Range examples:
+
+      >>> list(range(10))
+      [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
+      >>> list(range(1, 11))
+      [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
+      >>> list(range(0, 30, 5))
+      [0, 5, 10, 15, 20, 25]
+      >>> list(range(0, 10, 3))
+      [0, 3, 6, 9]
+      >>> list(range(0, -10, -1))
+      [0, -1, -2, -3, -4, -5, -6, -7, -8, -9]
+      >>> list(range(0))
+      []
+      >>> list(range(1, 0))
+      []
+
+   Ranges implement all of the common sequence operations except
+   concatenation and repetition (due to the fact that range objects
+   can only represent sequences that follow a strict pattern and
+   repetition and concatenation will usually violate that pattern).
+
+   start
+
+      The value of the *start* parameter (or "0" if the parameter was
+      not supplied)
+
+   stop
+
+      The value of the *stop* parameter
+
+   step
+
+      The value of the *step* parameter (or "1" if the parameter was
+      not supplied)
+
+The advantage of the "range" type over a regular "list" or "tuple" is
+that a "range" object will always take the same (small) amount of
+memory, no matter the size of the range it represents (as it only
+stores the "start", "stop" and "step" values, calculating individual
+items and subranges as needed).
+
+Range objects implement the "collections.abc.Sequence" ABC, and
+provide features such as containment tests, element index lookup,
+slicing and support for negative indices (see Sequence Types — list,
+tuple, range):
+
+>>> r = range(0, 20, 2)
+>>> r
+range(0, 20, 2)
+>>> 11 in r
+False
+>>> 10 in r
+True
+>>> r.index(10)
+5
+>>> r[5]
+10
+>>> r[:5]
+range(0, 10, 2)
+>>> r[-1]
+18
+
+Testing range objects for equality with "==" and "!=" compares them as
+sequences.  That is, two range objects are considered equal if they
+represent the same sequence of values.  (Note that two range objects
+that compare equal might have different "start", "stop" and "step"
+attributes, for example "range(0) == range(2, 1, 3)" or "range(0, 3,
+2) == range(0, 4, 2)".)
+
+Changed in version 3.2: Implement the Sequence ABC. Support slicing
+and negative indices. Test "int" objects for membership in constant
+time instead of iterating through all items.
+
+Changed in version 3.3: Define ‘==’ and ‘!=’ to compare range objects
+based on the sequence of values they define (instead of comparing
+based on object identity).Added the "start", "stop" and "step"
+attributes.
+
+See also:
+
+  * The linspace recipe shows how to implement a lazy version of range
+    suitable for floating-point applications.
+''',
+    'typesseq-mutable': r'''Mutable Sequence Types
+**********************
+
+The operations in the following table are defined on mutable sequence
+types. The "collections.abc.MutableSequence" ABC is provided to make
+it easier to correctly implement these operations on custom sequence
+types.
+
+In the table *s* is an instance of a mutable sequence type, *t* is any
+iterable object and *x* is an arbitrary object that meets any type and
+value restrictions imposed by *s* (for example, "bytearray" only
+accepts integers that meet the value restriction "0 <= x <= 255").
+
++--------------------------------+----------------------------------+-----------------------+
+| Operation                      | Result                           | Notes                 |
+|================================|==================================|=======================|
+| "s[i] = x"                     | item *i* of *s* is replaced by   |                       |
+|                                | *x*                              |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i]"                     | removes item *i* of *s*          |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s[i:j] = t"                   | slice of *s* from *i* to *j* is  |                       |
+|                                | replaced by the contents of the  |                       |
+|                                | iterable *t*                     |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i:j]"                   | removes the elements of "s[i:j]" |                       |
+|                                | from the list (same as "s[i:j] = |                       |
+|                                | []")                             |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s[i:j:k] = t"                 | the elements of "s[i:j:k]" are   | (1)                   |
+|                                | replaced by those of *t*         |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "del s[i:j:k]"                 | removes the elements of          |                       |
+|                                | "s[i:j:k]" from the list         |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s += t"                       | extends *s* with the contents of |                       |
+|                                | *t* (for the most part the same  |                       |
+|                                | as "s[len(s):len(s)] = t")       |                       |
++--------------------------------+----------------------------------+-----------------------+
+| "s *= n"                       | updates *s* with its contents    | (2)                   |
+|                                | repeated *n* times               |                       |
++--------------------------------+----------------------------------+-----------------------+
+
+Notes:
+
+1. If *k* is not equal to "1", *t* must have the same length as the
+   slice it is replacing.
+
+2. The value *n* is an integer, or an object implementing
+   "__index__()".  Zero and negative values of *n* clear the sequence.
+   Items in the sequence are not copied; they are referenced multiple
+   times, as explained for "s * n" under Common Sequence Operations.
+
+-[ Mutable Sequence Methods ]-
+
+Mutable sequence types also support the following methods:
+
+sequence.append(value, /)
+
+   Append *value* to the end of the sequence. This is equivalent to
+   writing "seq[len(seq):len(seq)] = [value]".
+
+sequence.clear()
+
+   Added in version 3.3.
+
+   Remove all items from *sequence*. This is equivalent to writing
+   "del sequence[:]".
+
+sequence.copy()
+
+   Added in version 3.3.
+
+   Create a shallow copy of *sequence*. This is equivalent to writing
+   "sequence[:]".
+
+   Hint:
+
+     The "copy()" method is not part of the "MutableSequence" "ABC",
+     but most concrete mutable sequence types provide it.
+
+sequence.extend(iterable, /)
+
+   Extend *sequence* with the contents of *iterable*. For the most
+   part, this is the same as writing "seq[len(seq):len(seq)] =
+   iterable".
+
+sequence.insert(index, value, /)
+
+   Insert *value* into *sequence* at the given *index*. This is
+   equivalent to writing "sequence[index:index] = [value]".
+
+sequence.pop(index=-1, /)
+
+   Retrieve the item at *index* and also removes it from *sequence*.
+   By default, the last item in *sequence* is removed and returned.
+
+sequence.remove(value, /)
+
+   Remove the first item from *sequence* where "sequence[i] == value".
+
+   Raises "ValueError" if *value* is not found in *sequence*.
+
+sequence.reverse()
+
+   Reverse the items of *sequence* in place. This method maintains
+   economy of space when reversing a large sequence. To remind users
+   that it operates by side-effect, it returns "None".
+''',
+    'unary': r'''Unary arithmetic and bitwise operations
+***************************************
+
+All unary arithmetic and bitwise operations have the same priority:
+
+   u_expr: power | "-" u_expr | "+" u_expr | "~" u_expr
+
+The unary "-" (minus) operator yields the negation of its numeric
+argument; the operation can be overridden with the "__neg__()" special
+method.
+
+The unary "+" (plus) operator yields its numeric argument unchanged;
+the operation can be overridden with the "__pos__()" special method.
+
+The unary "~" (invert) operator yields the bitwise inversion of its
+integer argument.  The bitwise inversion of "x" is defined as
+"-(x+1)".  It only applies to integral numbers or to custom objects
+that override the "__invert__()" special method.
+
+In all three cases, if the argument does not have the proper type, a
+"TypeError" exception is raised.
+''',
+    'while': r'''The "while" statement
+*********************
+
+The "while" statement is used for repeated execution as long as an
+expression is true:
+
+   while_stmt: "while" assignment_expression ":" suite
+               ["else" ":" suite]
+
+This repeatedly tests the expression and, if it is true, executes the
+first suite; if the expression is false (which may be the first time
+it is tested) the suite of the "else" clause, if present, is executed
+and the loop terminates.
+
+A "break" statement executed in the first suite terminates the loop
+without executing the "else" clause’s suite.  A "continue" statement
+executed in the first suite skips the rest of the suite and goes back
+to testing the expression.
+''',
+    'with': r'''The "with" statement
+********************
+
+The "with" statement is used to wrap the execution of a block with
+methods defined by a context manager (see section With Statement
+Context Managers). This allows common "try"…"except"…"finally" usage
+patterns to be encapsulated for convenient reuse.
+
+   with_stmt:          "with" ( "(" with_stmt_contents ","? ")" | with_stmt_contents ) ":" suite
+   with_stmt_contents: with_item ("," with_item)*
+   with_item:          expression ["as" target]
+
+The execution of the "with" statement with one “item” proceeds as
+follows:
+
+1. The context expression (the expression given in the "with_item") is
+   evaluated to obtain a context manager.
+
+2. The context manager’s "__enter__()" is loaded for later use.
+
+3. The context manager’s "__exit__()" is loaded for later use.
+
+4. The context manager’s "__enter__()" method is invoked.
+
+5. If a target was included in the "with" statement, the return value
+   from "__enter__()" is assigned to it.
+
+   Note:
+
+     The "with" statement guarantees that if the "__enter__()" method
+     returns without an error, then "__exit__()" will always be
+     called. Thus, if an error occurs during the assignment to the
+     target list, it will be treated the same as an error occurring
+     within the suite would be. See step 7 below.
+
+6. The suite is executed.
+
+7. The context manager’s "__exit__()" method is invoked.  If an
+   exception caused the suite to be exited, its type, value, and
+   traceback are passed as arguments to "__exit__()". Otherwise, three
+   "None" arguments are supplied.
+
+   If the suite was exited due to an exception, and the return value
+   from the "__exit__()" method was false, the exception is reraised.
+   If the return value was true, the exception is suppressed, and
+   execution continues with the statement following the "with"
+   statement.
+
+   If the suite was exited for any reason other than an exception, the
+   return value from "__exit__()" is ignored, and execution proceeds
+   at the normal location for the kind of exit that was taken.
+
+The following code:
+
+   with EXPRESSION as TARGET:
+       SUITE
+
+is semantically equivalent to:
+
+   manager = (EXPRESSION)
+   enter = manager.__enter__
+   exit = manager.__exit__
+   value = enter()
+   hit_except = False
+
+   try:
+       TARGET = value
+       SUITE
+   except:
+       hit_except = True
+       if not exit(*sys.exc_info()):
+           raise
+   finally:
+       if not hit_except:
+           exit(None, None, None)
+
+except that implicit special method lookup is used for "__enter__()"
+and "__exit__()".
+
+With more than one item, the context managers are processed as if
+multiple "with" statements were nested:
+
+   with A() as a, B() as b:
+       SUITE
+
+is semantically equivalent to:
+
+   with A() as a:
+       with B() as b:
+           SUITE
+
+You can also write multi-item context managers in multiple lines if
+the items are surrounded by parentheses. For example:
+
+   with (
+       A() as a,
+       B() as b,
+   ):
+       SUITE
+
+Changed in version 3.1: Support for multiple context expressions.
+
+Changed in version 3.10: Support for using grouping parentheses to
+break the statement in multiple lines.
+
+See also:
+
+  **PEP 343** - The “with” statement
+     The specification, background, and examples for the Python "with"
+     statement.
+''',
+    'yield': r'''The "yield" statement
+*********************
+
+   yield_stmt: yield_expression
+
+A "yield" statement is semantically equivalent to a yield expression.
+The "yield" statement can be used to omit the parentheses that would
+otherwise be required in the equivalent yield expression statement.
+For example, the yield statements
+
+   yield <expr>
+   yield from <expr>
+
+are equivalent to the yield expression statements
+
+   (yield <expr>)
+   (yield from <expr>)
+
+Yield expressions and statements are only used when defining a
+*generator* function, and are only used in the body of the generator
+function.  Using "yield" in a function definition is sufficient to
+cause that definition to create a generator function instead of a
+normal function.
+
+For full details of "yield" semantics, refer to the Yield expressions
+section.
+''',
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..af2808a77da69152b32aafb5a5c941d076921bc4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/__init__.py
@@ -0,0 +1,428 @@
+#
+# Secret Labs' Regular Expression Engine
+#
+# re-compatible interface for the sre matching engine
+#
+# Copyright (c) 1998-2001 by Secret Labs AB.  All rights reserved.
+#
+# This version of the SRE library can be redistributed under CNRI's
+# Python 1.6 license.  For any other use, please contact Secret Labs
+# AB (info@pythonware.com).
+#
+# Portions of this engine have been developed in cooperation with
+# CNRI.  Hewlett-Packard provided funding for 1.6 integration and
+# other compatibility work.
+#
+
+r"""Support for regular expressions (RE).
+
+This module provides regular expression matching operations similar to
+those found in Perl.  It supports both 8-bit and Unicode strings; both
+the pattern and the strings being processed can contain null bytes and
+characters outside the US ASCII range.
+
+Regular expressions can contain both special and ordinary characters.
+Most ordinary characters, like "A", "a", or "0", are the simplest
+regular expressions; they simply match themselves.  You can
+concatenate ordinary characters, so last matches the string 'last'.
+
+The special characters are:
+    "."      Matches any character except a newline.
+    "^"      Matches the start of the string.
+    "$"      Matches the end of the string or just before the newline at
+             the end of the string.
+    "*"      Matches 0 or more (greedy) repetitions of the preceding RE.
+             Greedy means that it will match as many repetitions as possible.
+    "+"      Matches 1 or more (greedy) repetitions of the preceding RE.
+    "?"      Matches 0 or 1 (greedy) of the preceding RE.
+    *?,+?,?? Non-greedy versions of the previous three special characters.
+    {m,n}    Matches from m to n repetitions of the preceding RE.
+    {m,n}?   Non-greedy version of the above.
+    "\\"     Either escapes special characters or signals a special sequence.
+    []       Indicates a set of characters.
+             A "^" as the first character indicates a complementing set.
+    "|"      A|B, creates an RE that will match either A or B.
+    (...)    Matches the RE inside the parentheses.
+             The contents can be retrieved or matched later in the string.
+    (?aiLmsux) The letters set the corresponding flags defined below.
+    (?:...)  Non-grouping version of regular parentheses.
+    (?P<name>...) The substring matched by the group is accessible by name.
+    (?P=name)     Matches the text matched earlier by the group named name.
+    (?#...)  A comment; ignored.
+    (?=...)  Matches if ... matches next, but doesn't consume the string.
+    (?!...)  Matches if ... doesn't match next.
+    (?<=...) Matches if preceded by ... (must be fixed length).
+    (?<!...) Matches if not preceded by ... (must be fixed length).
+    (?(id/name)yes|no) Matches yes pattern if the group with id/name matched,
+                       the (optional) no pattern otherwise.
+
+The special sequences consist of "\\" and a character from the list
+below.  If the ordinary character is not on the list, then the
+resulting RE will match the second character.
+    \number  Matches the contents of the group of the same number.
+    \A       Matches only at the start of the string.
+    \z       Matches only at the end of the string.
+    \b       Matches the empty string, but only at the start or end of a word.
+    \B       Matches the empty string, but not at the start or end of a word.
+    \d       Matches any decimal digit; equivalent to the set [0-9] in
+             bytes patterns or string patterns with the ASCII flag.
+             In string patterns without the ASCII flag, it will match the whole
+             range of Unicode digits.
+    \D       Matches any non-digit character; equivalent to [^\d].
+    \s       Matches any whitespace character; equivalent to [ \t\n\r\f\v] in
+             bytes patterns or string patterns with the ASCII flag.
+             In string patterns without the ASCII flag, it will match the whole
+             range of Unicode whitespace characters.
+    \S       Matches any non-whitespace character; equivalent to [^\s].
+    \w       Matches any alphanumeric character; equivalent to [a-zA-Z0-9_]
+             in bytes patterns or string patterns with the ASCII flag.
+             In string patterns without the ASCII flag, it will match the
+             range of Unicode alphanumeric characters (letters plus digits
+             plus underscore).
+             With LOCALE, it will match the set [0-9_] plus characters defined
+             as letters for the current locale.
+    \W       Matches the complement of \w.
+    \\       Matches a literal backslash.
+
+This module exports the following functions:
+    match     Match a regular expression pattern to the beginning of a string.
+    fullmatch Match a regular expression pattern to all of a string.
+    search    Search a string for the presence of a pattern.
+    sub       Substitute occurrences of a pattern found in a string.
+    subn      Same as sub, but also return the number of substitutions made.
+    split     Split a string by the occurrences of a pattern.
+    findall   Find all occurrences of a pattern in a string.
+    finditer  Return an iterator yielding a Match object for each match.
+    compile   Compile a pattern into a Pattern object.
+    purge     Clear the regular expression cache.
+    escape    Backslash all non-alphanumerics in a string.
+
+Each function other than purge and escape can take an optional 'flags' argument
+consisting of one or more of the following module constants, joined by "|".
+A, L, and U are mutually exclusive.
+    A  ASCII       For string patterns, make \w, \W, \b, \B, \d, \D
+                   match the corresponding ASCII character categories
+                   (rather than the whole Unicode categories, which is the
+                   default).
+                   For bytes patterns, this flag is the only available
+                   behaviour and needn't be specified.
+    I  IGNORECASE  Perform case-insensitive matching.
+    L  LOCALE      Make \w, \W, \b, \B, dependent on the current locale.
+    M  MULTILINE   "^" matches the beginning of lines (after a newline)
+                   as well as the string.
+                   "$" matches the end of lines (before a newline) as well
+                   as the end of the string.
+    S  DOTALL      "." matches any character at all, including the newline.
+    X  VERBOSE     Ignore whitespace and comments for nicer looking RE's.
+    U  UNICODE     For compatibility only. Ignored for string patterns (it
+                   is the default), and forbidden for bytes patterns.
+
+This module also defines exception 'PatternError', aliased to 'error' for
+backward compatibility.
+
+"""
+
+import enum
+from . import _compiler, _parser
+import functools
+import _sre
+
+
+# public symbols
+__all__ = [
+    "match", "fullmatch", "search", "sub", "subn", "split",
+    "findall", "finditer", "compile", "purge", "escape",
+    "error", "Pattern", "Match", "A", "I", "L", "M", "S", "X", "U",
+    "ASCII", "IGNORECASE", "LOCALE", "MULTILINE", "DOTALL", "VERBOSE",
+    "UNICODE", "NOFLAG", "RegexFlag", "PatternError"
+]
+
+__version__ = "2.2.1"
+
+@enum.global_enum
+@enum._simple_enum(enum.IntFlag, boundary=enum.KEEP)
+class RegexFlag:
+    NOFLAG = 0
+    ASCII = A = _compiler.SRE_FLAG_ASCII # assume ascii "locale"
+    IGNORECASE = I = _compiler.SRE_FLAG_IGNORECASE # ignore case
+    LOCALE = L = _compiler.SRE_FLAG_LOCALE # assume current 8-bit locale
+    UNICODE = U = _compiler.SRE_FLAG_UNICODE # assume unicode "locale"
+    MULTILINE = M = _compiler.SRE_FLAG_MULTILINE # make anchors look for newline
+    DOTALL = S = _compiler.SRE_FLAG_DOTALL # make dot match newline
+    VERBOSE = X = _compiler.SRE_FLAG_VERBOSE # ignore whitespace and comments
+    # sre extensions (experimental, don't rely on these)
+    DEBUG = _compiler.SRE_FLAG_DEBUG # dump pattern after compilation
+    __str__ = object.__str__
+    _numeric_repr_ = hex
+
+# sre exception
+PatternError = error = _compiler.PatternError
+
+# --------------------------------------------------------------------
+# public interface
+
+def match(pattern, string, flags=0):
+    """Try to apply the pattern at the start of the string, returning
+    a Match object, or None if no match was found."""
+    return _compile(pattern, flags).match(string)
+
+def fullmatch(pattern, string, flags=0):
+    """Try to apply the pattern to all of the string, returning
+    a Match object, or None if no match was found."""
+    return _compile(pattern, flags).fullmatch(string)
+
+def search(pattern, string, flags=0):
+    """Scan through string looking for a match to the pattern, returning
+    a Match object, or None if no match was found."""
+    return _compile(pattern, flags).search(string)
+
+class _ZeroSentinel(int):
+    pass
+_zero_sentinel = _ZeroSentinel()
+
+def sub(pattern, repl, string, *args, count=_zero_sentinel, flags=_zero_sentinel):
+    """Return the string obtained by replacing the leftmost
+    non-overlapping occurrences of the pattern in string by the
+    replacement repl.  repl can be either a string or a callable;
+    if a string, backslash escapes in it are processed.  If it is
+    a callable, it's passed the Match object and must return
+    a replacement string to be used."""
+    if args:
+        if count is not _zero_sentinel:
+            raise TypeError("sub() got multiple values for argument 'count'")
+        count, *args = args
+        if args:
+            if flags is not _zero_sentinel:
+                raise TypeError("sub() got multiple values for argument 'flags'")
+            flags, *args = args
+            if args:
+                raise TypeError("sub() takes from 3 to 5 positional arguments "
+                                "but %d were given" % (5 + len(args)))
+
+        import warnings
+        warnings.warn(
+            "'count' is passed as positional argument",
+            DeprecationWarning, stacklevel=2
+        )
+
+    return _compile(pattern, flags).sub(repl, string, count)
+sub.__text_signature__ = '(pattern, repl, string, count=0, flags=0)'
+
+def subn(pattern, repl, string, *args, count=_zero_sentinel, flags=_zero_sentinel):
+    """Return a 2-tuple containing (new_string, number).
+    new_string is the string obtained by replacing the leftmost
+    non-overlapping occurrences of the pattern in the source
+    string by the replacement repl.  number is the number of
+    substitutions that were made. repl can be either a string or a
+    callable; if a string, backslash escapes in it are processed.
+    If it is a callable, it's passed the Match object and must
+    return a replacement string to be used."""
+    if args:
+        if count is not _zero_sentinel:
+            raise TypeError("subn() got multiple values for argument 'count'")
+        count, *args = args
+        if args:
+            if flags is not _zero_sentinel:
+                raise TypeError("subn() got multiple values for argument 'flags'")
+            flags, *args = args
+            if args:
+                raise TypeError("subn() takes from 3 to 5 positional arguments "
+                                "but %d were given" % (5 + len(args)))
+
+        import warnings
+        warnings.warn(
+            "'count' is passed as positional argument",
+            DeprecationWarning, stacklevel=2
+        )
+
+    return _compile(pattern, flags).subn(repl, string, count)
+subn.__text_signature__ = '(pattern, repl, string, count=0, flags=0)'
+
+def split(pattern, string, *args, maxsplit=_zero_sentinel, flags=_zero_sentinel):
+    """Split the source string by the occurrences of the pattern,
+    returning a list containing the resulting substrings.  If
+    capturing parentheses are used in pattern, then the text of all
+    groups in the pattern are also returned as part of the resulting
+    list.  If maxsplit is nonzero, at most maxsplit splits occur,
+    and the remainder of the string is returned as the final element
+    of the list."""
+    if args:
+        if maxsplit is not _zero_sentinel:
+            raise TypeError("split() got multiple values for argument 'maxsplit'")
+        maxsplit, *args = args
+        if args:
+            if flags is not _zero_sentinel:
+                raise TypeError("split() got multiple values for argument 'flags'")
+            flags, *args = args
+            if args:
+                raise TypeError("split() takes from 2 to 4 positional arguments "
+                                "but %d were given" % (4 + len(args)))
+
+        import warnings
+        warnings.warn(
+            "'maxsplit' is passed as positional argument",
+            DeprecationWarning, stacklevel=2
+        )
+
+    return _compile(pattern, flags).split(string, maxsplit)
+split.__text_signature__ = '(pattern, string, maxsplit=0, flags=0)'
+
+def findall(pattern, string, flags=0):
+    """Return a list of all non-overlapping matches in the string.
+
+    If one or more capturing groups are present in the pattern, return
+    a list of groups; this will be a list of tuples if the pattern
+    has more than one group.
+
+    Empty matches are included in the result."""
+    return _compile(pattern, flags).findall(string)
+
+def finditer(pattern, string, flags=0):
+    """Return an iterator over all non-overlapping matches in the
+    string.  For each match, the iterator returns a Match object.
+
+    Empty matches are included in the result."""
+    return _compile(pattern, flags).finditer(string)
+
+def compile(pattern, flags=0):
+    "Compile a regular expression pattern, returning a Pattern object."
+    return _compile(pattern, flags)
+
+def purge():
+    "Clear the regular expression caches"
+    _cache.clear()
+    _cache2.clear()
+    _compile_template.cache_clear()
+
+
+# SPECIAL_CHARS
+# closing ')', '}' and ']'
+# '-' (a range in character set)
+# '&', '~', (extended character set operations)
+# '#' (comment) and WHITESPACE (ignored) in verbose mode
+_special_chars_map = {i: '\\' + chr(i) for i in b'()[]{}?*+-|^$\\.&~# \t\n\r\v\f'}
+
+def escape(pattern):
+    """
+    Escape special characters in a string.
+    """
+    if isinstance(pattern, str):
+        return pattern.translate(_special_chars_map)
+    else:
+        pattern = str(pattern, 'latin1')
+        return pattern.translate(_special_chars_map).encode('latin1')
+
+Pattern = type(_compiler.compile('', 0))
+Match = type(_compiler.compile('', 0).match(''))
+
+# --------------------------------------------------------------------
+# internals
+
+# Use the fact that dict keeps the insertion order.
+# _cache2 uses the simple FIFO policy which has better latency.
+# _cache uses the LRU policy which has better hit rate.
+_cache = {}  # LRU
+_cache2 = {}  # FIFO
+_MAXCACHE = 512
+_MAXCACHE2 = 256
+assert _MAXCACHE2 < _MAXCACHE
+
+def _compile(pattern, flags):
+    # internal: compile pattern
+    if isinstance(flags, RegexFlag):
+        flags = flags.value
+    try:
+        return _cache2[type(pattern), pattern, flags]
+    except KeyError:
+        pass
+
+    key = (type(pattern), pattern, flags)
+    # Item in _cache should be moved to the end if found.
+    p = _cache.pop(key, None)
+    if p is None:
+        if isinstance(pattern, Pattern):
+            if flags:
+                raise ValueError(
+                    "cannot process flags argument with a compiled pattern")
+            return pattern
+        if not _compiler.isstring(pattern):
+            raise TypeError("first argument must be string or compiled pattern")
+        p = _compiler.compile(pattern, flags)
+        if flags & DEBUG:
+            return p
+        if len(_cache) >= _MAXCACHE:
+            # Drop the least recently used item.
+            # next(iter(_cache)) is known to have linear amortized time,
+            # but it is used here to avoid a dependency from using OrderedDict.
+            # For the small _MAXCACHE value it doesn't make much of a difference.
+            try:
+                del _cache[next(iter(_cache))]
+            except (StopIteration, RuntimeError, KeyError):
+                pass
+    # Append to the end.
+    _cache[key] = p
+
+    if len(_cache2) >= _MAXCACHE2:
+        # Drop the oldest item.
+        try:
+            del _cache2[next(iter(_cache2))]
+        except (StopIteration, RuntimeError, KeyError):
+            pass
+    _cache2[key] = p
+    return p
+
+@functools.lru_cache(_MAXCACHE)
+def _compile_template(pattern, repl):
+    # internal: compile replacement pattern
+    return _sre.template(pattern, _parser.parse_template(repl, pattern))
+
+# register myself for pickling
+
+import copyreg
+
+def _pickle(p):
+    return _compile, (p.pattern, p.flags)
+
+copyreg.pickle(Pattern, _pickle, _compile)
+
+# --------------------------------------------------------------------
+# experimental stuff (see python-dev discussions for details)
+
+class Scanner:
+    def __init__(self, lexicon, flags=0):
+        from ._constants import BRANCH, SUBPATTERN
+        if isinstance(flags, RegexFlag):
+            flags = flags.value
+        self.lexicon = lexicon
+        # combine phrases into a compound pattern
+        p = []
+        s = _parser.State()
+        s.flags = flags
+        for phrase, action in lexicon:
+            gid = s.opengroup()
+            p.append(_parser.SubPattern(s, [
+                (SUBPATTERN, (gid, 0, 0, _parser.parse(phrase, flags))),
+                ]))
+            s.closegroup(gid, p[-1])
+        p = _parser.SubPattern(s, [(BRANCH, (None, p))])
+        self.scanner = _compiler.compile(p)
+    def scan(self, string):
+        result = []
+        append = result.append
+        match = self.scanner.scanner(string).match
+        i = 0
+        while True:
+            m = match()
+            if not m:
+                break
+            j = m.end()
+            if i == j:
+                break
+            action = self.lexicon[m.lastindex-1][1]
+            if callable(action):
+                self.match = m
+                action = action(self, m.group())
+            if action is not None:
+                append(action)
+            i = j
+        return result, string[i:]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_casefix.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_casefix.py
new file mode 100644
index 0000000000000000000000000000000000000000..fed2d84fc01473c8eece3abae784395c591e1a46
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_casefix.py
@@ -0,0 +1,106 @@
+# Auto-generated by Tools/build/generate_re_casefix.py.
+
+# Maps the code of lowercased character to codes of different lowercased
+# characters which have the same uppercase.
+_EXTRA_CASES = {
+    # LATIN SMALL LETTER I: LATIN SMALL LETTER DOTLESS I
+    0x0069: (0x0131,), # 'i': 'ı'
+    # LATIN SMALL LETTER S: LATIN SMALL LETTER LONG S
+    0x0073: (0x017f,), # 's': 'ſ'
+    # MICRO SIGN: GREEK SMALL LETTER MU
+    0x00b5: (0x03bc,), # 'µ': 'μ'
+    # LATIN SMALL LETTER DOTLESS I: LATIN SMALL LETTER I
+    0x0131: (0x0069,), # 'ı': 'i'
+    # LATIN SMALL LETTER LONG S: LATIN SMALL LETTER S
+    0x017f: (0x0073,), # 'ſ': 's'
+    # COMBINING GREEK YPOGEGRAMMENI: GREEK SMALL LETTER IOTA, GREEK PROSGEGRAMMENI
+    0x0345: (0x03b9, 0x1fbe), # '\u0345': 'ιι'
+    # GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS: GREEK SMALL LETTER IOTA WITH DIALYTIKA AND OXIA
+    0x0390: (0x1fd3,), # 'ΐ': 'ΐ'
+    # GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS: GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND OXIA
+    0x03b0: (0x1fe3,), # 'ΰ': 'ΰ'
+    # GREEK SMALL LETTER BETA: GREEK BETA SYMBOL
+    0x03b2: (0x03d0,), # 'β': 'ϐ'
+    # GREEK SMALL LETTER EPSILON: GREEK LUNATE EPSILON SYMBOL
+    0x03b5: (0x03f5,), # 'ε': 'ϵ'
+    # GREEK SMALL LETTER THETA: GREEK THETA SYMBOL
+    0x03b8: (0x03d1,), # 'θ': 'ϑ'
+    # GREEK SMALL LETTER IOTA: COMBINING GREEK YPOGEGRAMMENI, GREEK PROSGEGRAMMENI
+    0x03b9: (0x0345, 0x1fbe), # 'ι': '\u0345ι'
+    # GREEK SMALL LETTER KAPPA: GREEK KAPPA SYMBOL
+    0x03ba: (0x03f0,), # 'κ': 'ϰ'
+    # GREEK SMALL LETTER MU: MICRO SIGN
+    0x03bc: (0x00b5,), # 'μ': 'µ'
+    # GREEK SMALL LETTER PI: GREEK PI SYMBOL
+    0x03c0: (0x03d6,), # 'π': 'ϖ'
+    # GREEK SMALL LETTER RHO: GREEK RHO SYMBOL
+    0x03c1: (0x03f1,), # 'ρ': 'ϱ'
+    # GREEK SMALL LETTER FINAL SIGMA: GREEK SMALL LETTER SIGMA
+    0x03c2: (0x03c3,), # 'ς': 'σ'
+    # GREEK SMALL LETTER SIGMA: GREEK SMALL LETTER FINAL SIGMA
+    0x03c3: (0x03c2,), # 'σ': 'ς'
+    # GREEK SMALL LETTER PHI: GREEK PHI SYMBOL
+    0x03c6: (0x03d5,), # 'φ': 'ϕ'
+    # GREEK BETA SYMBOL: GREEK SMALL LETTER BETA
+    0x03d0: (0x03b2,), # 'ϐ': 'β'
+    # GREEK THETA SYMBOL: GREEK SMALL LETTER THETA
+    0x03d1: (0x03b8,), # 'ϑ': 'θ'
+    # GREEK PHI SYMBOL: GREEK SMALL LETTER PHI
+    0x03d5: (0x03c6,), # 'ϕ': 'φ'
+    # GREEK PI SYMBOL: GREEK SMALL LETTER PI
+    0x03d6: (0x03c0,), # 'ϖ': 'π'
+    # GREEK KAPPA SYMBOL: GREEK SMALL LETTER KAPPA
+    0x03f0: (0x03ba,), # 'ϰ': 'κ'
+    # GREEK RHO SYMBOL: GREEK SMALL LETTER RHO
+    0x03f1: (0x03c1,), # 'ϱ': 'ρ'
+    # GREEK LUNATE EPSILON SYMBOL: GREEK SMALL LETTER EPSILON
+    0x03f5: (0x03b5,), # 'ϵ': 'ε'
+    # CYRILLIC SMALL LETTER VE: CYRILLIC SMALL LETTER ROUNDED VE
+    0x0432: (0x1c80,), # 'в': 'ᲀ'
+    # CYRILLIC SMALL LETTER DE: CYRILLIC SMALL LETTER LONG-LEGGED DE
+    0x0434: (0x1c81,), # 'д': 'ᲁ'
+    # CYRILLIC SMALL LETTER O: CYRILLIC SMALL LETTER NARROW O
+    0x043e: (0x1c82,), # 'о': 'ᲂ'
+    # CYRILLIC SMALL LETTER ES: CYRILLIC SMALL LETTER WIDE ES
+    0x0441: (0x1c83,), # 'с': 'ᲃ'
+    # CYRILLIC SMALL LETTER TE: CYRILLIC SMALL LETTER TALL TE, CYRILLIC SMALL LETTER THREE-LEGGED TE
+    0x0442: (0x1c84, 0x1c85), # 'т': 'ᲄᲅ'
+    # CYRILLIC SMALL LETTER HARD SIGN: CYRILLIC SMALL LETTER TALL HARD SIGN
+    0x044a: (0x1c86,), # 'ъ': 'ᲆ'
+    # CYRILLIC SMALL LETTER YAT: CYRILLIC SMALL LETTER TALL YAT
+    0x0463: (0x1c87,), # 'ѣ': 'ᲇ'
+    # CYRILLIC SMALL LETTER ROUNDED VE: CYRILLIC SMALL LETTER VE
+    0x1c80: (0x0432,), # 'ᲀ': 'в'
+    # CYRILLIC SMALL LETTER LONG-LEGGED DE: CYRILLIC SMALL LETTER DE
+    0x1c81: (0x0434,), # 'ᲁ': 'д'
+    # CYRILLIC SMALL LETTER NARROW O: CYRILLIC SMALL LETTER O
+    0x1c82: (0x043e,), # 'ᲂ': 'о'
+    # CYRILLIC SMALL LETTER WIDE ES: CYRILLIC SMALL LETTER ES
+    0x1c83: (0x0441,), # 'ᲃ': 'с'
+    # CYRILLIC SMALL LETTER TALL TE: CYRILLIC SMALL LETTER TE, CYRILLIC SMALL LETTER THREE-LEGGED TE
+    0x1c84: (0x0442, 0x1c85), # 'ᲄ': 'тᲅ'
+    # CYRILLIC SMALL LETTER THREE-LEGGED TE: CYRILLIC SMALL LETTER TE, CYRILLIC SMALL LETTER TALL TE
+    0x1c85: (0x0442, 0x1c84), # 'ᲅ': 'тᲄ'
+    # CYRILLIC SMALL LETTER TALL HARD SIGN: CYRILLIC SMALL LETTER HARD SIGN
+    0x1c86: (0x044a,), # 'ᲆ': 'ъ'
+    # CYRILLIC SMALL LETTER TALL YAT: CYRILLIC SMALL LETTER YAT
+    0x1c87: (0x0463,), # 'ᲇ': 'ѣ'
+    # CYRILLIC SMALL LETTER UNBLENDED UK: CYRILLIC SMALL LETTER MONOGRAPH UK
+    0x1c88: (0xa64b,), # 'ᲈ': 'ꙋ'
+    # LATIN SMALL LETTER S WITH DOT ABOVE: LATIN SMALL LETTER LONG S WITH DOT ABOVE
+    0x1e61: (0x1e9b,), # 'ṡ': 'ẛ'
+    # LATIN SMALL LETTER LONG S WITH DOT ABOVE: LATIN SMALL LETTER S WITH DOT ABOVE
+    0x1e9b: (0x1e61,), # 'ẛ': 'ṡ'
+    # GREEK PROSGEGRAMMENI: COMBINING GREEK YPOGEGRAMMENI, GREEK SMALL LETTER IOTA
+    0x1fbe: (0x0345, 0x03b9), # 'ι': '\u0345ι'
+    # GREEK SMALL LETTER IOTA WITH DIALYTIKA AND OXIA: GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
+    0x1fd3: (0x0390,), # 'ΐ': 'ΐ'
+    # GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND OXIA: GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
+    0x1fe3: (0x03b0,), # 'ΰ': 'ΰ'
+    # CYRILLIC SMALL LETTER MONOGRAPH UK: CYRILLIC SMALL LETTER UNBLENDED UK
+    0xa64b: (0x1c88,), # 'ꙋ': 'ᲈ'
+    # LATIN SMALL LIGATURE LONG S T: LATIN SMALL LIGATURE ST
+    0xfb05: (0xfb06,), # 'ſt': 'st'
+    # LATIN SMALL LIGATURE ST: LATIN SMALL LIGATURE LONG S T
+    0xfb06: (0xfb05,), # 'st': 'ſt'
+}
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_compiler.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_compiler.py
new file mode 100644
index 0000000000000000000000000000000000000000..20dd561d1c1520fe0ece07bcd92e7e24a297f779
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_compiler.py
@@ -0,0 +1,782 @@
+#
+# Secret Labs' Regular Expression Engine
+#
+# convert template to internal format
+#
+# Copyright (c) 1997-2001 by Secret Labs AB.  All rights reserved.
+#
+# See the __init__.py file for information on usage and redistribution.
+#
+
+"""Internal support module for sre"""
+
+import _sre
+from . import _parser
+from ._constants import *
+from ._casefix import _EXTRA_CASES
+
+assert _sre.MAGIC == MAGIC, "SRE module mismatch"
+
+_LITERAL_CODES = {LITERAL, NOT_LITERAL}
+_SUCCESS_CODES = {SUCCESS, FAILURE}
+_ASSERT_CODES = {ASSERT, ASSERT_NOT}
+_UNIT_CODES = _LITERAL_CODES | {ANY, IN}
+
+_REPEATING_CODES = {
+    MIN_REPEAT: (REPEAT, MIN_UNTIL, MIN_REPEAT_ONE),
+    MAX_REPEAT: (REPEAT, MAX_UNTIL, REPEAT_ONE),
+    POSSESSIVE_REPEAT: (POSSESSIVE_REPEAT, SUCCESS, POSSESSIVE_REPEAT_ONE),
+}
+
+_CHARSET_ALL = [(NEGATE, None)]
+
+def _combine_flags(flags, add_flags, del_flags,
+                   TYPE_FLAGS=_parser.TYPE_FLAGS):
+    if add_flags & TYPE_FLAGS:
+        flags &= ~TYPE_FLAGS
+    return (flags | add_flags) & ~del_flags
+
+def _compile(code, pattern, flags):
+    # internal: compile a (sub)pattern
+    emit = code.append
+    _len = len
+    LITERAL_CODES = _LITERAL_CODES
+    REPEATING_CODES = _REPEATING_CODES
+    SUCCESS_CODES = _SUCCESS_CODES
+    ASSERT_CODES = _ASSERT_CODES
+    iscased = None
+    tolower = None
+    fixes = None
+    if flags & SRE_FLAG_IGNORECASE and not flags & SRE_FLAG_LOCALE:
+        if flags & SRE_FLAG_UNICODE:
+            iscased = _sre.unicode_iscased
+            tolower = _sre.unicode_tolower
+            fixes = _EXTRA_CASES
+        else:
+            iscased = _sre.ascii_iscased
+            tolower = _sre.ascii_tolower
+    for op, av in pattern:
+        if op in LITERAL_CODES:
+            if not flags & SRE_FLAG_IGNORECASE:
+                emit(op)
+                emit(av)
+            elif flags & SRE_FLAG_LOCALE:
+                emit(OP_LOCALE_IGNORE[op])
+                emit(av)
+            elif not iscased(av):
+                emit(op)
+                emit(av)
+            else:
+                lo = tolower(av)
+                if not fixes:  # ascii
+                    emit(OP_IGNORE[op])
+                    emit(lo)
+                elif lo not in fixes:
+                    emit(OP_UNICODE_IGNORE[op])
+                    emit(lo)
+                else:
+                    emit(IN_UNI_IGNORE)
+                    skip = _len(code); emit(0)
+                    if op is NOT_LITERAL:
+                        emit(NEGATE)
+                    for k in (lo,) + fixes[lo]:
+                        emit(LITERAL)
+                        emit(k)
+                    emit(FAILURE)
+                    code[skip] = _len(code) - skip
+        elif op is IN:
+            charset, hascased = _optimize_charset(av, iscased, tolower, fixes)
+            if not charset:
+                emit(FAILURE)
+            elif charset == _CHARSET_ALL:
+                emit(ANY_ALL)
+            else:
+                if flags & SRE_FLAG_IGNORECASE and flags & SRE_FLAG_LOCALE:
+                    emit(IN_LOC_IGNORE)
+                elif not hascased:
+                    emit(IN)
+                elif not fixes:  # ascii
+                    emit(IN_IGNORE)
+                else:
+                    emit(IN_UNI_IGNORE)
+                skip = _len(code); emit(0)
+                _compile_charset(charset, flags, code)
+                code[skip] = _len(code) - skip
+        elif op is ANY:
+            if flags & SRE_FLAG_DOTALL:
+                emit(ANY_ALL)
+            else:
+                emit(ANY)
+        elif op in REPEATING_CODES:
+            if _simple(av[2]):
+                emit(REPEATING_CODES[op][2])
+                skip = _len(code); emit(0)
+                emit(av[0])
+                emit(av[1])
+                _compile(code, av[2], flags)
+                emit(SUCCESS)
+                code[skip] = _len(code) - skip
+            else:
+                emit(REPEATING_CODES[op][0])
+                skip = _len(code); emit(0)
+                emit(av[0])
+                emit(av[1])
+                _compile(code, av[2], flags)
+                code[skip] = _len(code) - skip
+                emit(REPEATING_CODES[op][1])
+        elif op is SUBPATTERN:
+            group, add_flags, del_flags, p = av
+            if group:
+                emit(MARK)
+                emit((group-1)*2)
+            # _compile_info(code, p, _combine_flags(flags, add_flags, del_flags))
+            _compile(code, p, _combine_flags(flags, add_flags, del_flags))
+            if group:
+                emit(MARK)
+                emit((group-1)*2+1)
+        elif op is ATOMIC_GROUP:
+            # Atomic Groups are handled by starting with an Atomic
+            # Group op code, then putting in the atomic group pattern
+            # and finally a success op code to tell any repeat
+            # operations within the Atomic Group to stop eating and
+            # pop their stack if they reach it
+            emit(ATOMIC_GROUP)
+            skip = _len(code); emit(0)
+            _compile(code, av, flags)
+            emit(SUCCESS)
+            code[skip] = _len(code) - skip
+        elif op in SUCCESS_CODES:
+            emit(op)
+        elif op in ASSERT_CODES:
+            emit(op)
+            skip = _len(code); emit(0)
+            if av[0] >= 0:
+                emit(0) # look ahead
+            else:
+                lo, hi = av[1].getwidth()
+                if lo > MAXCODE:
+                    raise error("looks too much behind")
+                if lo != hi:
+                    raise PatternError("look-behind requires fixed-width pattern")
+                emit(lo) # look behind
+            _compile(code, av[1], flags)
+            emit(SUCCESS)
+            code[skip] = _len(code) - skip
+        elif op is AT:
+            emit(op)
+            if flags & SRE_FLAG_MULTILINE:
+                av = AT_MULTILINE.get(av, av)
+            if flags & SRE_FLAG_LOCALE:
+                av = AT_LOCALE.get(av, av)
+            elif flags & SRE_FLAG_UNICODE:
+                av = AT_UNICODE.get(av, av)
+            emit(av)
+        elif op is BRANCH:
+            emit(op)
+            tail = []
+            tailappend = tail.append
+            for av in av[1]:
+                skip = _len(code); emit(0)
+                # _compile_info(code, av, flags)
+                _compile(code, av, flags)
+                emit(JUMP)
+                tailappend(_len(code)); emit(0)
+                code[skip] = _len(code) - skip
+            emit(FAILURE) # end of branch
+            for tail in tail:
+                code[tail] = _len(code) - tail
+        elif op is CATEGORY:
+            emit(op)
+            if flags & SRE_FLAG_LOCALE:
+                av = CH_LOCALE[av]
+            elif flags & SRE_FLAG_UNICODE:
+                av = CH_UNICODE[av]
+            emit(av)
+        elif op is GROUPREF:
+            if not flags & SRE_FLAG_IGNORECASE:
+                emit(op)
+            elif flags & SRE_FLAG_LOCALE:
+                emit(GROUPREF_LOC_IGNORE)
+            elif not fixes:  # ascii
+                emit(GROUPREF_IGNORE)
+            else:
+                emit(GROUPREF_UNI_IGNORE)
+            emit(av-1)
+        elif op is GROUPREF_EXISTS:
+            emit(op)
+            emit(av[0]-1)
+            skipyes = _len(code); emit(0)
+            _compile(code, av[1], flags)
+            if av[2]:
+                emit(JUMP)
+                skipno = _len(code); emit(0)
+                code[skipyes] = _len(code) - skipyes + 1
+                _compile(code, av[2], flags)
+                code[skipno] = _len(code) - skipno
+            else:
+                code[skipyes] = _len(code) - skipyes + 1
+        else:
+            raise PatternError(f"internal: unsupported operand type {op!r}")
+
+def _compile_charset(charset, flags, code):
+    # compile charset subprogram
+    emit = code.append
+    for op, av in charset:
+        emit(op)
+        if op is NEGATE:
+            pass
+        elif op is LITERAL:
+            emit(av)
+        elif op is RANGE or op is RANGE_UNI_IGNORE:
+            emit(av[0])
+            emit(av[1])
+        elif op is CHARSET:
+            code.extend(av)
+        elif op is BIGCHARSET:
+            code.extend(av)
+        elif op is CATEGORY:
+            if flags & SRE_FLAG_LOCALE:
+                emit(CH_LOCALE[av])
+            elif flags & SRE_FLAG_UNICODE:
+                emit(CH_UNICODE[av])
+            else:
+                emit(av)
+        else:
+            raise PatternError(f"internal: unsupported set operator {op!r}")
+    emit(FAILURE)
+
+def _optimize_charset(charset, iscased=None, fixup=None, fixes=None):
+    # internal: optimize character set
+    out = []
+    tail = []
+    charmap = bytearray(256)
+    hascased = False
+    for op, av in charset:
+        while True:
+            try:
+                if op is LITERAL:
+                    if fixup: # IGNORECASE and not LOCALE
+                        av = fixup(av)
+                        charmap[av] = 1
+                        if fixes and av in fixes:
+                            for k in fixes[av]:
+                                charmap[k] = 1
+                        if not hascased and iscased(av):
+                            hascased = True
+                    else:
+                        charmap[av] = 1
+                elif op is RANGE:
+                    r = range(av[0], av[1]+1)
+                    if fixup: # IGNORECASE and not LOCALE
+                        if fixes:
+                            for i in map(fixup, r):
+                                charmap[i] = 1
+                                if i in fixes:
+                                    for k in fixes[i]:
+                                        charmap[k] = 1
+                        else:
+                            for i in map(fixup, r):
+                                charmap[i] = 1
+                        if not hascased:
+                            hascased = any(map(iscased, r))
+                    else:
+                        for i in r:
+                            charmap[i] = 1
+                elif op is NEGATE:
+                    out.append((op, av))
+                elif op is CATEGORY and tail and (CATEGORY, CH_NEGATE[av]) in tail:
+                    # Optimize [\s\S] etc.
+                    out = [] if out else _CHARSET_ALL
+                    return out, False
+                else:
+                    tail.append((op, av))
+            except IndexError:
+                if len(charmap) == 256:
+                    # character set contains non-UCS1 character codes
+                    charmap += b'\0' * 0xff00
+                    continue
+                # Character set contains non-BMP character codes.
+                # For range, all BMP characters in the range are already
+                # proceeded.
+                if fixup: # IGNORECASE and not LOCALE
+                    # For now, IN_UNI_IGNORE+LITERAL and
+                    # IN_UNI_IGNORE+RANGE_UNI_IGNORE work for all non-BMP
+                    # characters, because two characters (at least one of
+                    # which is not in the BMP) match case-insensitively
+                    # if and only if:
+                    # 1) c1.lower() == c2.lower()
+                    # 2) c1.lower() == c2 or c1.lower().upper() == c2
+                    # Also, both c.lower() and c.lower().upper() are single
+                    # characters for every non-BMP character.
+                    if op is RANGE:
+                        if fixes: # not ASCII
+                            op = RANGE_UNI_IGNORE
+                        hascased = True
+                    else:
+                        assert op is LITERAL
+                        if not hascased and iscased(av):
+                            hascased = True
+                tail.append((op, av))
+            break
+
+    # compress character map
+    runs = []
+    q = 0
+    while True:
+        p = charmap.find(1, q)
+        if p < 0:
+            break
+        if len(runs) >= 2:
+            runs = None
+            break
+        q = charmap.find(0, p)
+        if q < 0:
+            runs.append((p, len(charmap)))
+            break
+        runs.append((p, q))
+    if runs is not None:
+        # use literal/range
+        for p, q in runs:
+            if q - p == 1:
+                out.append((LITERAL, p))
+            else:
+                out.append((RANGE, (p, q - 1)))
+        out += tail
+        # if the case was changed or new representation is more compact
+        if hascased or len(out) < len(charset):
+            return out, hascased
+        # else original character set is good enough
+        return charset, hascased
+
+    # use bitmap
+    if len(charmap) == 256:
+        data = _mk_bitmap(charmap)
+        out.append((CHARSET, data))
+        out += tail
+        return out, hascased
+
+    # To represent a big charset, first a bitmap of all characters in the
+    # set is constructed. Then, this bitmap is sliced into chunks of 256
+    # characters, duplicate chunks are eliminated, and each chunk is
+    # given a number. In the compiled expression, the charset is
+    # represented by a 32-bit word sequence, consisting of one word for
+    # the number of different chunks, a sequence of 256 bytes (64 words)
+    # of chunk numbers indexed by their original chunk position, and a
+    # sequence of 256-bit chunks (8 words each).
+
+    # Compression is normally good: in a typical charset, large ranges of
+    # Unicode will be either completely excluded (e.g. if only cyrillic
+    # letters are to be matched), or completely included (e.g. if large
+    # subranges of Kanji match). These ranges will be represented by
+    # chunks of all one-bits or all zero-bits.
+
+    # Matching can be also done efficiently: the more significant byte of
+    # the Unicode character is an index into the chunk number, and the
+    # less significant byte is a bit index in the chunk (just like the
+    # CHARSET matching).
+
+    charmap = bytes(charmap) # should be hashable
+    comps = {}
+    mapping = bytearray(256)
+    block = 0
+    data = bytearray()
+    for i in range(0, 65536, 256):
+        chunk = charmap[i: i + 256]
+        if chunk in comps:
+            mapping[i // 256] = comps[chunk]
+        else:
+            mapping[i // 256] = comps[chunk] = block
+            block += 1
+            data += chunk
+    data = _mk_bitmap(data)
+    data[0:0] = [block] + _bytes_to_codes(mapping)
+    out.append((BIGCHARSET, data))
+    out += tail
+    return out, hascased
+
+_CODEBITS = _sre.CODESIZE * 8
+MAXCODE = (1 << _CODEBITS) - 1
+_BITS_TRANS = b'0' + b'1' * 255
+def _mk_bitmap(bits, _CODEBITS=_CODEBITS, _int=int):
+    s = bits.translate(_BITS_TRANS)[::-1]
+    return [_int(s[i - _CODEBITS: i], 2)
+            for i in range(len(s), 0, -_CODEBITS)]
+
+def _bytes_to_codes(b):
+    # Convert block indices to word array
+    a = memoryview(b).cast('I')
+    assert a.itemsize == _sre.CODESIZE
+    assert len(a) * a.itemsize == len(b)
+    return a.tolist()
+
+def _simple(p):
+    # check if this subpattern is a "simple" operator
+    if len(p) != 1:
+        return False
+    op, av = p[0]
+    if op is SUBPATTERN:
+        return av[0] is None and _simple(av[-1])
+    return op in _UNIT_CODES
+
+def _generate_overlap_table(prefix):
+    """
+    Generate an overlap table for the following prefix.
+    An overlap table is a table of the same size as the prefix which
+    informs about the potential self-overlap for each index in the prefix:
+    - if overlap[i] == 0, prefix[i:] can't overlap prefix[0:...]
+    - if overlap[i] == k with 0 < k <= i, prefix[i-k+1:i+1] overlaps with
+      prefix[0:k]
+    """
+    table = [0] * len(prefix)
+    for i in range(1, len(prefix)):
+        idx = table[i - 1]
+        while prefix[i] != prefix[idx]:
+            if idx == 0:
+                table[i] = 0
+                break
+            idx = table[idx - 1]
+        else:
+            table[i] = idx + 1
+    return table
+
+def _get_iscased(flags):
+    if not flags & SRE_FLAG_IGNORECASE:
+        return None
+    elif flags & SRE_FLAG_UNICODE:
+        return _sre.unicode_iscased
+    else:
+        return _sre.ascii_iscased
+
+def _get_literal_prefix(pattern, flags):
+    # look for literal prefix
+    prefix = []
+    prefixappend = prefix.append
+    prefix_skip = None
+    iscased = _get_iscased(flags)
+    for op, av in pattern.data:
+        if op is LITERAL:
+            if iscased and iscased(av):
+                break
+            prefixappend(av)
+        elif op is SUBPATTERN:
+            group, add_flags, del_flags, p = av
+            flags1 = _combine_flags(flags, add_flags, del_flags)
+            if flags1 & SRE_FLAG_IGNORECASE and flags1 & SRE_FLAG_LOCALE:
+                break
+            prefix1, prefix_skip1, got_all = _get_literal_prefix(p, flags1)
+            if prefix_skip is None:
+                if group is not None:
+                    prefix_skip = len(prefix)
+                elif prefix_skip1 is not None:
+                    prefix_skip = len(prefix) + prefix_skip1
+            prefix.extend(prefix1)
+            if not got_all:
+                break
+        else:
+            break
+    else:
+        return prefix, prefix_skip, True
+    return prefix, prefix_skip, False
+
+def _get_charset_prefix(pattern, flags):
+    while True:
+        if not pattern.data:
+            return None
+        op, av = pattern.data[0]
+        if op is not SUBPATTERN:
+            break
+        group, add_flags, del_flags, pattern = av
+        flags = _combine_flags(flags, add_flags, del_flags)
+        if flags & SRE_FLAG_IGNORECASE and flags & SRE_FLAG_LOCALE:
+            return None
+
+    iscased = _get_iscased(flags)
+    if op is LITERAL:
+        if iscased and iscased(av):
+            return None
+        return [(op, av)]
+    elif op is BRANCH:
+        charset = []
+        charsetappend = charset.append
+        for p in av[1]:
+            if not p:
+                return None
+            op, av = p[0]
+            if op is LITERAL and not (iscased and iscased(av)):
+                charsetappend((op, av))
+            else:
+                return None
+        return charset
+    elif op is IN:
+        charset = av
+        if iscased:
+            for op, av in charset:
+                if op is LITERAL:
+                    if iscased(av):
+                        return None
+                elif op is RANGE:
+                    if av[1] > 0xffff:
+                        return None
+                    if any(map(iscased, range(av[0], av[1]+1))):
+                        return None
+        return charset
+    return None
+
+def _compile_info(code, pattern, flags):
+    # internal: compile an info block.  in the current version,
+    # this contains min/max pattern width, and an optional literal
+    # prefix or a character map
+    lo, hi = pattern.getwidth()
+    if hi > MAXCODE:
+        hi = MAXCODE
+    if lo == 0:
+        code.extend([INFO, 4, 0, lo, hi])
+        return
+    # look for a literal prefix
+    prefix = []
+    prefix_skip = 0
+    charset = None # not used
+    if not (flags & SRE_FLAG_IGNORECASE and flags & SRE_FLAG_LOCALE):
+        # look for literal prefix
+        prefix, prefix_skip, got_all = _get_literal_prefix(pattern, flags)
+        # if no prefix, look for charset prefix
+        if not prefix:
+            charset = _get_charset_prefix(pattern, flags)
+            if charset:
+                charset, hascased = _optimize_charset(charset)
+                assert not hascased
+                if charset == _CHARSET_ALL:
+                    charset = None
+##     if prefix:
+##         print("*** PREFIX", prefix, prefix_skip)
+##     if charset:
+##         print("*** CHARSET", charset)
+    # add an info block
+    emit = code.append
+    emit(INFO)
+    skip = len(code); emit(0)
+    # literal flag
+    mask = 0
+    if prefix:
+        mask = SRE_INFO_PREFIX
+        if prefix_skip is None and got_all:
+            mask = mask | SRE_INFO_LITERAL
+    elif charset:
+        mask = mask | SRE_INFO_CHARSET
+    emit(mask)
+    # pattern length
+    if lo < MAXCODE:
+        emit(lo)
+    else:
+        emit(MAXCODE)
+        prefix = prefix[:MAXCODE]
+    emit(hi)
+    # add literal prefix
+    if prefix:
+        emit(len(prefix)) # length
+        if prefix_skip is None:
+            prefix_skip =  len(prefix)
+        emit(prefix_skip) # skip
+        code.extend(prefix)
+        # generate overlap table
+        code.extend(_generate_overlap_table(prefix))
+    elif charset:
+        _compile_charset(charset, flags, code)
+    code[skip] = len(code) - skip
+
+def isstring(obj):
+    return isinstance(obj, (str, bytes))
+
+def _code(p, flags):
+
+    flags = p.state.flags | flags
+    code = []
+
+    # compile info block
+    _compile_info(code, p, flags)
+
+    # compile the pattern
+    _compile(code, p.data, flags)
+
+    code.append(SUCCESS)
+
+    return code
+
+def _hex_code(code):
+    return '[%s]' % ', '.join('%#0*x' % (_sre.CODESIZE*2+2, x) for x in code)
+
+def dis(code):
+    import sys
+
+    labels = set()
+    level = 0
+    offset_width = len(str(len(code) - 1))
+
+    def dis_(start, end):
+        def print_(*args, to=None):
+            if to is not None:
+                labels.add(to)
+                args += ('(to %d)' % (to,),)
+            print('%*d%s ' % (offset_width, start, ':' if start in labels else '.'),
+                  end='  '*(level-1))
+            print(*args)
+
+        def print_2(*args):
+            print(end=' '*(offset_width + 2*level))
+            print(*args)
+
+        nonlocal level
+        level += 1
+        i = start
+        while i < end:
+            start = i
+            op = code[i]
+            i += 1
+            op = OPCODES[op]
+            if op in (SUCCESS, FAILURE, ANY, ANY_ALL,
+                      MAX_UNTIL, MIN_UNTIL, NEGATE):
+                print_(op)
+            elif op in (LITERAL, NOT_LITERAL,
+                        LITERAL_IGNORE, NOT_LITERAL_IGNORE,
+                        LITERAL_UNI_IGNORE, NOT_LITERAL_UNI_IGNORE,
+                        LITERAL_LOC_IGNORE, NOT_LITERAL_LOC_IGNORE):
+                arg = code[i]
+                i += 1
+                print_(op, '%#02x (%r)' % (arg, chr(arg)))
+            elif op is AT:
+                arg = code[i]
+                i += 1
+                arg = str(ATCODES[arg])
+                assert arg[:3] == 'AT_'
+                print_(op, arg[3:])
+            elif op is CATEGORY:
+                arg = code[i]
+                i += 1
+                arg = str(CHCODES[arg])
+                assert arg[:9] == 'CATEGORY_'
+                print_(op, arg[9:])
+            elif op in (IN, IN_IGNORE, IN_UNI_IGNORE, IN_LOC_IGNORE):
+                skip = code[i]
+                print_(op, skip, to=i+skip)
+                dis_(i+1, i+skip)
+                i += skip
+            elif op in (RANGE, RANGE_UNI_IGNORE):
+                lo, hi = code[i: i+2]
+                i += 2
+                print_(op, '%#02x %#02x (%r-%r)' % (lo, hi, chr(lo), chr(hi)))
+            elif op is CHARSET:
+                print_(op, _hex_code(code[i: i + 256//_CODEBITS]))
+                i += 256//_CODEBITS
+            elif op is BIGCHARSET:
+                arg = code[i]
+                i += 1
+                mapping = list(b''.join(x.to_bytes(_sre.CODESIZE, sys.byteorder)
+                                        for x in code[i: i + 256//_sre.CODESIZE]))
+                print_(op, arg, mapping)
+                i += 256//_sre.CODESIZE
+                level += 1
+                for j in range(arg):
+                    print_2(_hex_code(code[i: i + 256//_CODEBITS]))
+                    i += 256//_CODEBITS
+                level -= 1
+            elif op in (MARK, GROUPREF, GROUPREF_IGNORE, GROUPREF_UNI_IGNORE,
+                        GROUPREF_LOC_IGNORE):
+                arg = code[i]
+                i += 1
+                print_(op, arg)
+            elif op is JUMP:
+                skip = code[i]
+                print_(op, skip, to=i+skip)
+                i += 1
+            elif op is BRANCH:
+                skip = code[i]
+                print_(op, skip, to=i+skip)
+                while skip:
+                    dis_(i+1, i+skip)
+                    i += skip
+                    start = i
+                    skip = code[i]
+                    if skip:
+                        print_('branch', skip, to=i+skip)
+                    else:
+                        print_(FAILURE)
+                i += 1
+            elif op in (REPEAT, REPEAT_ONE, MIN_REPEAT_ONE,
+                        POSSESSIVE_REPEAT, POSSESSIVE_REPEAT_ONE):
+                skip, min, max = code[i: i+3]
+                if max == MAXREPEAT:
+                    max = 'MAXREPEAT'
+                print_(op, skip, min, max, to=i+skip)
+                dis_(i+3, i+skip)
+                i += skip
+            elif op is GROUPREF_EXISTS:
+                arg, skip = code[i: i+2]
+                print_(op, arg, skip, to=i+skip)
+                i += 2
+            elif op in (ASSERT, ASSERT_NOT):
+                skip, arg = code[i: i+2]
+                print_(op, skip, arg, to=i+skip)
+                dis_(i+2, i+skip)
+                i += skip
+            elif op is ATOMIC_GROUP:
+                skip = code[i]
+                print_(op, skip, to=i+skip)
+                dis_(i+1, i+skip)
+                i += skip
+            elif op is INFO:
+                skip, flags, min, max = code[i: i+4]
+                if max == MAXREPEAT:
+                    max = 'MAXREPEAT'
+                print_(op, skip, bin(flags), min, max, to=i+skip)
+                start = i+4
+                if flags & SRE_INFO_PREFIX:
+                    prefix_len, prefix_skip = code[i+4: i+6]
+                    print_2('  prefix_skip', prefix_skip)
+                    start = i + 6
+                    prefix = code[start: start+prefix_len]
+                    print_2('  prefix',
+                            '[%s]' % ', '.join('%#02x' % x for x in prefix),
+                            '(%r)' % ''.join(map(chr, prefix)))
+                    start += prefix_len
+                    print_2('  overlap', code[start: start+prefix_len])
+                    start += prefix_len
+                if flags & SRE_INFO_CHARSET:
+                    level += 1
+                    print_2('in')
+                    dis_(start, i+skip)
+                    level -= 1
+                i += skip
+            else:
+                raise ValueError(op)
+
+        level -= 1
+
+    dis_(0, len(code))
+
+
+def compile(p, flags=0):
+    # internal: convert pattern list to internal format
+
+    if isstring(p):
+        pattern = p
+        p = _parser.parse(p, flags)
+    else:
+        pattern = None
+
+    code = _code(p, flags)
+
+    if flags & SRE_FLAG_DEBUG:
+        print()
+        dis(code)
+
+    # map in either direction
+    groupindex = p.state.groupdict
+    indexgroup = [None] * p.state.groups
+    for k, i in groupindex.items():
+        indexgroup[i] = k
+
+    return _sre.compile(
+        pattern, flags | p.state.flags, code,
+        p.state.groups-1,
+        groupindex, tuple(indexgroup)
+        )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_constants.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_constants.py
new file mode 100644
index 0000000000000000000000000000000000000000..d6f32302d37b2db934a93a520717304fbb94a27e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_constants.py
@@ -0,0 +1,224 @@
+#
+# Secret Labs' Regular Expression Engine
+#
+# various symbols used by the regular expression engine.
+# run this script to update the _sre include files!
+#
+# Copyright (c) 1998-2001 by Secret Labs AB.  All rights reserved.
+#
+# See the __init__.py file for information on usage and redistribution.
+#
+
+"""Internal support module for sre"""
+
+# update when constants are added or removed
+
+MAGIC = 20230612
+
+from _sre import MAXREPEAT, MAXGROUPS  # noqa: F401
+
+# SRE standard exception (access as sre.error)
+# should this really be here?
+
+class PatternError(Exception):
+    """Exception raised for invalid regular expressions.
+
+    Attributes:
+
+        msg: The unformatted error message
+        pattern: The regular expression pattern
+        pos: The index in the pattern where compilation failed (may be None)
+        lineno: The line corresponding to pos (may be None)
+        colno: The column corresponding to pos (may be None)
+    """
+
+    __module__ = 're'
+
+    def __init__(self, msg, pattern=None, pos=None):
+        self.msg = msg
+        self.pattern = pattern
+        self.pos = pos
+        if pattern is not None and pos is not None:
+            msg = '%s at position %d' % (msg, pos)
+            if isinstance(pattern, str):
+                newline = '\n'
+            else:
+                newline = b'\n'
+            self.lineno = pattern.count(newline, 0, pos) + 1
+            self.colno = pos - pattern.rfind(newline, 0, pos)
+            if newline in pattern:
+                msg = '%s (line %d, column %d)' % (msg, self.lineno, self.colno)
+        else:
+            self.lineno = self.colno = None
+        super().__init__(msg)
+
+
+# Backward compatibility after renaming in 3.13
+error = PatternError
+
+class _NamedIntConstant(int):
+    def __new__(cls, value, name):
+        self = super(_NamedIntConstant, cls).__new__(cls, value)
+        self.name = name
+        return self
+
+    def __repr__(self):
+        return self.name
+
+    __reduce__ = None
+
+MAXREPEAT = _NamedIntConstant(MAXREPEAT, 'MAXREPEAT')
+
+def _makecodes(*names):
+    items = [_NamedIntConstant(i, name) for i, name in enumerate(names)]
+    globals().update({item.name: item for item in items})
+    return items
+
+# operators
+OPCODES = _makecodes(
+    # failure=0 success=1 (just because it looks better that way :-)
+    'FAILURE', 'SUCCESS',
+
+    'ANY', 'ANY_ALL',
+    'ASSERT', 'ASSERT_NOT',
+    'AT',
+    'BRANCH',
+    'CATEGORY',
+    'CHARSET', 'BIGCHARSET',
+    'GROUPREF', 'GROUPREF_EXISTS',
+    'IN',
+    'INFO',
+    'JUMP',
+    'LITERAL',
+    'MARK',
+    'MAX_UNTIL',
+    'MIN_UNTIL',
+    'NOT_LITERAL',
+    'NEGATE',
+    'RANGE',
+    'REPEAT',
+    'REPEAT_ONE',
+    'SUBPATTERN',
+    'MIN_REPEAT_ONE',
+    'ATOMIC_GROUP',
+    'POSSESSIVE_REPEAT',
+    'POSSESSIVE_REPEAT_ONE',
+
+    'GROUPREF_IGNORE',
+    'IN_IGNORE',
+    'LITERAL_IGNORE',
+    'NOT_LITERAL_IGNORE',
+
+    'GROUPREF_LOC_IGNORE',
+    'IN_LOC_IGNORE',
+    'LITERAL_LOC_IGNORE',
+    'NOT_LITERAL_LOC_IGNORE',
+
+    'GROUPREF_UNI_IGNORE',
+    'IN_UNI_IGNORE',
+    'LITERAL_UNI_IGNORE',
+    'NOT_LITERAL_UNI_IGNORE',
+    'RANGE_UNI_IGNORE',
+
+    # The following opcodes are only occurred in the parser output,
+    # but not in the compiled code.
+    'MIN_REPEAT', 'MAX_REPEAT',
+)
+del OPCODES[-2:] # remove MIN_REPEAT and MAX_REPEAT
+
+# positions
+ATCODES = _makecodes(
+    'AT_BEGINNING', 'AT_BEGINNING_LINE', 'AT_BEGINNING_STRING',
+    'AT_BOUNDARY', 'AT_NON_BOUNDARY',
+    'AT_END', 'AT_END_LINE', 'AT_END_STRING',
+
+    'AT_LOC_BOUNDARY', 'AT_LOC_NON_BOUNDARY',
+
+    'AT_UNI_BOUNDARY', 'AT_UNI_NON_BOUNDARY',
+)
+
+# categories
+CHCODES = _makecodes(
+    'CATEGORY_DIGIT', 'CATEGORY_NOT_DIGIT',
+    'CATEGORY_SPACE', 'CATEGORY_NOT_SPACE',
+    'CATEGORY_WORD', 'CATEGORY_NOT_WORD',
+    'CATEGORY_LINEBREAK', 'CATEGORY_NOT_LINEBREAK',
+
+    'CATEGORY_LOC_WORD', 'CATEGORY_LOC_NOT_WORD',
+
+    'CATEGORY_UNI_DIGIT', 'CATEGORY_UNI_NOT_DIGIT',
+    'CATEGORY_UNI_SPACE', 'CATEGORY_UNI_NOT_SPACE',
+    'CATEGORY_UNI_WORD', 'CATEGORY_UNI_NOT_WORD',
+    'CATEGORY_UNI_LINEBREAK', 'CATEGORY_UNI_NOT_LINEBREAK',
+)
+
+
+# replacement operations for "ignore case" mode
+OP_IGNORE = {
+    LITERAL: LITERAL_IGNORE,
+    NOT_LITERAL: NOT_LITERAL_IGNORE,
+}
+
+OP_LOCALE_IGNORE = {
+    LITERAL: LITERAL_LOC_IGNORE,
+    NOT_LITERAL: NOT_LITERAL_LOC_IGNORE,
+}
+
+OP_UNICODE_IGNORE = {
+    LITERAL: LITERAL_UNI_IGNORE,
+    NOT_LITERAL: NOT_LITERAL_UNI_IGNORE,
+}
+
+AT_MULTILINE = {
+    AT_BEGINNING: AT_BEGINNING_LINE,
+    AT_END: AT_END_LINE
+}
+
+AT_LOCALE = {
+    AT_BOUNDARY: AT_LOC_BOUNDARY,
+    AT_NON_BOUNDARY: AT_LOC_NON_BOUNDARY
+}
+
+AT_UNICODE = {
+    AT_BOUNDARY: AT_UNI_BOUNDARY,
+    AT_NON_BOUNDARY: AT_UNI_NON_BOUNDARY
+}
+
+CH_LOCALE = {
+    CATEGORY_DIGIT: CATEGORY_DIGIT,
+    CATEGORY_NOT_DIGIT: CATEGORY_NOT_DIGIT,
+    CATEGORY_SPACE: CATEGORY_SPACE,
+    CATEGORY_NOT_SPACE: CATEGORY_NOT_SPACE,
+    CATEGORY_WORD: CATEGORY_LOC_WORD,
+    CATEGORY_NOT_WORD: CATEGORY_LOC_NOT_WORD,
+    CATEGORY_LINEBREAK: CATEGORY_LINEBREAK,
+    CATEGORY_NOT_LINEBREAK: CATEGORY_NOT_LINEBREAK
+}
+
+CH_UNICODE = {
+    CATEGORY_DIGIT: CATEGORY_UNI_DIGIT,
+    CATEGORY_NOT_DIGIT: CATEGORY_UNI_NOT_DIGIT,
+    CATEGORY_SPACE: CATEGORY_UNI_SPACE,
+    CATEGORY_NOT_SPACE: CATEGORY_UNI_NOT_SPACE,
+    CATEGORY_WORD: CATEGORY_UNI_WORD,
+    CATEGORY_NOT_WORD: CATEGORY_UNI_NOT_WORD,
+    CATEGORY_LINEBREAK: CATEGORY_UNI_LINEBREAK,
+    CATEGORY_NOT_LINEBREAK: CATEGORY_UNI_NOT_LINEBREAK
+}
+
+CH_NEGATE = dict(zip(CHCODES[::2] + CHCODES[1::2], CHCODES[1::2] + CHCODES[::2]))
+
+# flags
+SRE_FLAG_IGNORECASE = 2 # case insensitive
+SRE_FLAG_LOCALE = 4 # honour system locale
+SRE_FLAG_MULTILINE = 8 # treat target as multiline string
+SRE_FLAG_DOTALL = 16 # treat target as a single string
+SRE_FLAG_UNICODE = 32 # use unicode "locale"
+SRE_FLAG_VERBOSE = 64 # ignore whitespace and comments
+SRE_FLAG_DEBUG = 128 # debugging
+SRE_FLAG_ASCII = 256 # use ascii "locale"
+
+# flags for INFO primitive
+SRE_INFO_PREFIX = 1 # has prefix
+SRE_INFO_LITERAL = 2 # entire pattern is literal (given by prefix)
+SRE_INFO_CHARSET = 4 # pattern starts with character from given set
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_parser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..35ab7ede2a75a98033c08d45b0f1a181b9232cfb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/re/_parser.py
@@ -0,0 +1,1066 @@
+#
+# Secret Labs' Regular Expression Engine
+#
+# convert re-style regular expression to sre pattern
+#
+# Copyright (c) 1998-2001 by Secret Labs AB.  All rights reserved.
+#
+# See the __init__.py file for information on usage and redistribution.
+#
+
+"""Internal support module for sre"""
+
+# XXX: show string offset and offending character for all errors
+
+from ._constants import *
+
+SPECIAL_CHARS = ".\\[{()*+?^$|"
+REPEAT_CHARS = "*+?{"
+
+DIGITS = frozenset("0123456789")
+
+OCTDIGITS = frozenset("01234567")
+HEXDIGITS = frozenset("0123456789abcdefABCDEF")
+ASCIILETTERS = frozenset("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ")
+
+WHITESPACE = frozenset(" \t\n\r\v\f")
+
+_REPEATCODES = frozenset({MIN_REPEAT, MAX_REPEAT, POSSESSIVE_REPEAT})
+_UNITCODES = frozenset({ANY, RANGE, IN, LITERAL, NOT_LITERAL, CATEGORY})
+
+ESCAPES = {
+    r"\a": (LITERAL, ord("\a")),
+    r"\b": (LITERAL, ord("\b")),
+    r"\f": (LITERAL, ord("\f")),
+    r"\n": (LITERAL, ord("\n")),
+    r"\r": (LITERAL, ord("\r")),
+    r"\t": (LITERAL, ord("\t")),
+    r"\v": (LITERAL, ord("\v")),
+    r"\\": (LITERAL, ord("\\"))
+}
+
+CATEGORIES = {
+    r"\A": (AT, AT_BEGINNING_STRING), # start of string
+    r"\b": (AT, AT_BOUNDARY),
+    r"\B": (AT, AT_NON_BOUNDARY),
+    r"\d": (IN, [(CATEGORY, CATEGORY_DIGIT)]),
+    r"\D": (IN, [(CATEGORY, CATEGORY_NOT_DIGIT)]),
+    r"\s": (IN, [(CATEGORY, CATEGORY_SPACE)]),
+    r"\S": (IN, [(CATEGORY, CATEGORY_NOT_SPACE)]),
+    r"\w": (IN, [(CATEGORY, CATEGORY_WORD)]),
+    r"\W": (IN, [(CATEGORY, CATEGORY_NOT_WORD)]),
+    r"\z": (AT, AT_END_STRING), # end of string
+    r"\Z": (AT, AT_END_STRING), # end of string (obsolete)
+}
+
+FLAGS = {
+    # standard flags
+    "i": SRE_FLAG_IGNORECASE,
+    "L": SRE_FLAG_LOCALE,
+    "m": SRE_FLAG_MULTILINE,
+    "s": SRE_FLAG_DOTALL,
+    "x": SRE_FLAG_VERBOSE,
+    # extensions
+    "a": SRE_FLAG_ASCII,
+    "u": SRE_FLAG_UNICODE,
+}
+
+TYPE_FLAGS = SRE_FLAG_ASCII | SRE_FLAG_LOCALE | SRE_FLAG_UNICODE
+GLOBAL_FLAGS = SRE_FLAG_DEBUG
+
+# Maximal value returned by SubPattern.getwidth().
+# Must be larger than MAXREPEAT, MAXCODE and sys.maxsize.
+MAXWIDTH = 1 << 64
+
+class State:
+    # keeps track of state for parsing
+    def __init__(self):
+        self.flags = 0
+        self.groupdict = {}
+        self.groupwidths = [None]  # group 0
+        self.lookbehindgroups = None
+        self.grouprefpos = {}
+    @property
+    def groups(self):
+        return len(self.groupwidths)
+    def opengroup(self, name=None):
+        gid = self.groups
+        self.groupwidths.append(None)
+        if self.groups > MAXGROUPS:
+            raise error("too many groups")
+        if name is not None:
+            ogid = self.groupdict.get(name, None)
+            if ogid is not None:
+                raise error("redefinition of group name %r as group %d; "
+                            "was group %d" % (name, gid,  ogid))
+            self.groupdict[name] = gid
+        return gid
+    def closegroup(self, gid, p):
+        self.groupwidths[gid] = p.getwidth()
+    def checkgroup(self, gid):
+        return gid < self.groups and self.groupwidths[gid] is not None
+
+    def checklookbehindgroup(self, gid, source):
+        if self.lookbehindgroups is not None:
+            if not self.checkgroup(gid):
+                raise source.error('cannot refer to an open group')
+            if gid >= self.lookbehindgroups:
+                raise source.error('cannot refer to group defined in the same '
+                                   'lookbehind subpattern')
+
+class SubPattern:
+    # a subpattern, in intermediate form
+    def __init__(self, state, data=None):
+        self.state = state
+        if data is None:
+            data = []
+        self.data = data
+        self.width = None
+
+    def dump(self, level=0):
+        seqtypes = (tuple, list)
+        for op, av in self.data:
+            print(level*"  " + str(op), end='')
+            if op is IN:
+                # member sublanguage
+                print()
+                for op, a in av:
+                    print((level+1)*"  " + str(op), a)
+            elif op is BRANCH:
+                print()
+                for i, a in enumerate(av[1]):
+                    if i:
+                        print(level*"  " + "OR")
+                    a.dump(level+1)
+            elif op is GROUPREF_EXISTS:
+                condgroup, item_yes, item_no = av
+                print('', condgroup)
+                item_yes.dump(level+1)
+                if item_no:
+                    print(level*"  " + "ELSE")
+                    item_no.dump(level+1)
+            elif isinstance(av, SubPattern):
+                print()
+                av.dump(level+1)
+            elif isinstance(av, seqtypes):
+                nl = False
+                for a in av:
+                    if isinstance(a, SubPattern):
+                        if not nl:
+                            print()
+                        a.dump(level+1)
+                        nl = True
+                    else:
+                        if not nl:
+                            print(' ', end='')
+                        print(a, end='')
+                        nl = False
+                if not nl:
+                    print()
+            else:
+                print('', av)
+    def __repr__(self):
+        return repr(self.data)
+    def __len__(self):
+        return len(self.data)
+    def __delitem__(self, index):
+        del self.data[index]
+    def __getitem__(self, index):
+        if isinstance(index, slice):
+            return SubPattern(self.state, self.data[index])
+        return self.data[index]
+    def __setitem__(self, index, code):
+        self.data[index] = code
+    def insert(self, index, code):
+        self.data.insert(index, code)
+    def append(self, code):
+        self.data.append(code)
+    def getwidth(self):
+        # determine the width (min, max) for this subpattern
+        if self.width is not None:
+            return self.width
+        lo = hi = 0
+        for op, av in self.data:
+            if op is BRANCH:
+                i = MAXWIDTH
+                j = 0
+                for av in av[1]:
+                    l, h = av.getwidth()
+                    i = min(i, l)
+                    j = max(j, h)
+                lo = lo + i
+                hi = hi + j
+            elif op is ATOMIC_GROUP:
+                i, j = av.getwidth()
+                lo = lo + i
+                hi = hi + j
+            elif op is SUBPATTERN:
+                i, j = av[-1].getwidth()
+                lo = lo + i
+                hi = hi + j
+            elif op in _REPEATCODES:
+                i, j = av[2].getwidth()
+                lo = lo + i * av[0]
+                if av[1] == MAXREPEAT and j:
+                    hi = MAXWIDTH
+                else:
+                    hi = hi + j * av[1]
+            elif op in _UNITCODES:
+                lo = lo + 1
+                hi = hi + 1
+            elif op is GROUPREF:
+                i, j = self.state.groupwidths[av]
+                lo = lo + i
+                hi = hi + j
+            elif op is GROUPREF_EXISTS:
+                i, j = av[1].getwidth()
+                if av[2] is not None:
+                    l, h = av[2].getwidth()
+                    i = min(i, l)
+                    j = max(j, h)
+                else:
+                    i = 0
+                lo = lo + i
+                hi = hi + j
+            elif op is SUCCESS:
+                break
+        self.width = min(lo, MAXWIDTH), min(hi, MAXWIDTH)
+        return self.width
+
+class Tokenizer:
+    def __init__(self, string):
+        self.istext = isinstance(string, str)
+        self.string = string
+        if not self.istext:
+            string = str(string, 'latin1')
+        self.decoded_string = string
+        self.index = 0
+        self.next = None
+        self.__next()
+    def __next(self):
+        index = self.index
+        try:
+            char = self.decoded_string[index]
+        except IndexError:
+            self.next = None
+            return
+        if char == "\\":
+            index += 1
+            try:
+                char += self.decoded_string[index]
+            except IndexError:
+                raise error("bad escape (end of pattern)",
+                            self.string, len(self.string) - 1) from None
+        self.index = index + 1
+        self.next = char
+    def match(self, char):
+        if char == self.next:
+            self.__next()
+            return True
+        return False
+    def get(self):
+        this = self.next
+        self.__next()
+        return this
+    def getwhile(self, n, charset):
+        result = ''
+        for _ in range(n):
+            c = self.next
+            if c not in charset:
+                break
+            result += c
+            self.__next()
+        return result
+    def getuntil(self, terminator, name):
+        result = ''
+        while True:
+            c = self.next
+            self.__next()
+            if c is None:
+                if not result:
+                    raise self.error("missing " + name)
+                raise self.error("missing %s, unterminated name" % terminator,
+                                 len(result))
+            if c == terminator:
+                if not result:
+                    raise self.error("missing " + name, 1)
+                break
+            result += c
+        return result
+    @property
+    def pos(self):
+        return self.index - len(self.next or '')
+    def tell(self):
+        return self.index - len(self.next or '')
+    def seek(self, index):
+        self.index = index
+        self.__next()
+
+    def error(self, msg, offset=0):
+        if not self.istext:
+            msg = msg.encode('ascii', 'backslashreplace').decode('ascii')
+        return error(msg, self.string, self.tell() - offset)
+
+    def checkgroupname(self, name, offset):
+        if not (self.istext or name.isascii()):
+            msg = "bad character in group name %a" % name
+            raise self.error(msg, len(name) + offset)
+        if not name.isidentifier():
+            msg = "bad character in group name %r" % name
+            raise self.error(msg, len(name) + offset)
+
+def _class_escape(source, escape):
+    # handle escape code inside character class
+    code = ESCAPES.get(escape)
+    if code:
+        return code
+    code = CATEGORIES.get(escape)
+    if code and code[0] is IN:
+        return code
+    try:
+        c = escape[1:2]
+        if c == "x":
+            # hexadecimal escape (exactly two digits)
+            escape += source.getwhile(2, HEXDIGITS)
+            if len(escape) != 4:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            return LITERAL, int(escape[2:], 16)
+        elif c == "u" and source.istext:
+            # unicode escape (exactly four digits)
+            escape += source.getwhile(4, HEXDIGITS)
+            if len(escape) != 6:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            return LITERAL, int(escape[2:], 16)
+        elif c == "U" and source.istext:
+            # unicode escape (exactly eight digits)
+            escape += source.getwhile(8, HEXDIGITS)
+            if len(escape) != 10:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            c = int(escape[2:], 16)
+            chr(c) # raise ValueError for invalid code
+            return LITERAL, c
+        elif c == "N" and source.istext:
+            import unicodedata
+            # named unicode escape e.g. \N{EM DASH}
+            if not source.match('{'):
+                raise source.error("missing {")
+            charname = source.getuntil('}', 'character name')
+            try:
+                c = ord(unicodedata.lookup(charname))
+            except (KeyError, TypeError):
+                raise source.error("undefined character name %r" % charname,
+                                   len(charname) + len(r'\N{}')) from None
+            return LITERAL, c
+        elif c in OCTDIGITS:
+            # octal escape (up to three digits)
+            escape += source.getwhile(2, OCTDIGITS)
+            c = int(escape[1:], 8)
+            if c > 0o377:
+                raise source.error('octal escape value %s outside of '
+                                   'range 0-0o377' % escape, len(escape))
+            return LITERAL, c
+        elif c in DIGITS:
+            raise ValueError
+        if len(escape) == 2:
+            if c in ASCIILETTERS:
+                raise source.error('bad escape %s' % escape, len(escape))
+            return LITERAL, ord(escape[1])
+    except ValueError:
+        pass
+    raise source.error("bad escape %s" % escape, len(escape))
+
+def _escape(source, escape, state):
+    # handle escape code in expression
+    code = CATEGORIES.get(escape)
+    if code:
+        return code
+    code = ESCAPES.get(escape)
+    if code:
+        return code
+    try:
+        c = escape[1:2]
+        if c == "x":
+            # hexadecimal escape
+            escape += source.getwhile(2, HEXDIGITS)
+            if len(escape) != 4:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            return LITERAL, int(escape[2:], 16)
+        elif c == "u" and source.istext:
+            # unicode escape (exactly four digits)
+            escape += source.getwhile(4, HEXDIGITS)
+            if len(escape) != 6:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            return LITERAL, int(escape[2:], 16)
+        elif c == "U" and source.istext:
+            # unicode escape (exactly eight digits)
+            escape += source.getwhile(8, HEXDIGITS)
+            if len(escape) != 10:
+                raise source.error("incomplete escape %s" % escape, len(escape))
+            c = int(escape[2:], 16)
+            chr(c) # raise ValueError for invalid code
+            return LITERAL, c
+        elif c == "N" and source.istext:
+            import unicodedata
+            # named unicode escape e.g. \N{EM DASH}
+            if not source.match('{'):
+                raise source.error("missing {")
+            charname = source.getuntil('}', 'character name')
+            try:
+                c = ord(unicodedata.lookup(charname))
+            except (KeyError, TypeError):
+                raise source.error("undefined character name %r" % charname,
+                                   len(charname) + len(r'\N{}')) from None
+            return LITERAL, c
+        elif c == "0":
+            # octal escape
+            escape += source.getwhile(2, OCTDIGITS)
+            return LITERAL, int(escape[1:], 8)
+        elif c in DIGITS:
+            # octal escape *or* decimal group reference (sigh)
+            if source.next in DIGITS:
+                escape += source.get()
+                if (escape[1] in OCTDIGITS and escape[2] in OCTDIGITS and
+                    source.next in OCTDIGITS):
+                    # got three octal digits; this is an octal escape
+                    escape += source.get()
+                    c = int(escape[1:], 8)
+                    if c > 0o377:
+                        raise source.error('octal escape value %s outside of '
+                                           'range 0-0o377' % escape,
+                                           len(escape))
+                    return LITERAL, c
+            # not an octal escape, so this is a group reference
+            group = int(escape[1:])
+            if group < state.groups:
+                if not state.checkgroup(group):
+                    raise source.error("cannot refer to an open group",
+                                       len(escape))
+                state.checklookbehindgroup(group, source)
+                return GROUPREF, group
+            raise source.error("invalid group reference %d" % group, len(escape) - 1)
+        if len(escape) == 2:
+            if c in ASCIILETTERS:
+                raise source.error("bad escape %s" % escape, len(escape))
+            return LITERAL, ord(escape[1])
+    except ValueError:
+        pass
+    raise source.error("bad escape %s" % escape, len(escape))
+
+def _uniq(items):
+    return list(dict.fromkeys(items))
+
+def _parse_sub(source, state, verbose, nested):
+    # parse an alternation: a|b|c
+
+    items = []
+    itemsappend = items.append
+    sourcematch = source.match
+    start = source.tell()
+    while True:
+        itemsappend(_parse(source, state, verbose, nested + 1,
+                           not nested and not items))
+        if not sourcematch("|"):
+            break
+        if not nested:
+            verbose = state.flags & SRE_FLAG_VERBOSE
+
+    if len(items) == 1:
+        return items[0]
+
+    subpattern = SubPattern(state)
+
+    # check if all items share a common prefix
+    while True:
+        prefix = None
+        for item in items:
+            if not item:
+                break
+            if prefix is None:
+                prefix = item[0]
+            elif item[0] != prefix:
+                break
+        else:
+            # all subitems start with a common "prefix".
+            # move it out of the branch
+            for item in items:
+                del item[0]
+            subpattern.append(prefix)
+            continue # check next one
+        break
+
+    # check if the branch can be replaced by a character set
+    set = []
+    for item in items:
+        if len(item) != 1:
+            break
+        op, av = item[0]
+        if op is LITERAL:
+            set.append((op, av))
+        elif op is IN and av[0][0] is not NEGATE:
+            set.extend(av)
+        else:
+            break
+    else:
+        # we can store this as a character set instead of a
+        # branch (the compiler may optimize this even more)
+        subpattern.append((IN, _uniq(set)))
+        return subpattern
+
+    subpattern.append((BRANCH, (None, items)))
+    return subpattern
+
+def _parse(source, state, verbose, nested, first=False):
+    # parse a simple pattern
+    subpattern = SubPattern(state)
+
+    # precompute constants into local variables
+    subpatternappend = subpattern.append
+    sourceget = source.get
+    sourcematch = source.match
+    _len = len
+    _ord = ord
+
+    while True:
+
+        this = source.next
+        if this is None:
+            break # end of pattern
+        if this in "|)":
+            break # end of subpattern
+        sourceget()
+
+        if verbose:
+            # skip whitespace and comments
+            if this in WHITESPACE:
+                continue
+            if this == "#":
+                while True:
+                    this = sourceget()
+                    if this is None or this == "\n":
+                        break
+                continue
+
+        if this[0] == "\\":
+            code = _escape(source, this, state)
+            subpatternappend(code)
+
+        elif this not in SPECIAL_CHARS:
+            subpatternappend((LITERAL, _ord(this)))
+
+        elif this == "[":
+            here = source.tell() - 1
+            # character set
+            set = []
+            setappend = set.append
+##          if sourcematch(":"):
+##              pass # handle character classes
+            if source.next == '[':
+                import warnings
+                warnings.warn(
+                    'Possible nested set at position %d' % source.tell(),
+                    FutureWarning, stacklevel=nested + 6
+                )
+            negate = sourcematch("^")
+            # check remaining characters
+            while True:
+                this = sourceget()
+                if this is None:
+                    raise source.error("unterminated character set",
+                                       source.tell() - here)
+                if this == "]" and set:
+                    break
+                elif this[0] == "\\":
+                    code1 = _class_escape(source, this)
+                else:
+                    if set and this in '-&~|' and source.next == this:
+                        import warnings
+                        warnings.warn(
+                            'Possible set %s at position %d' % (
+                                'difference' if this == '-' else
+                                'intersection' if this == '&' else
+                                'symmetric difference' if this == '~' else
+                                'union',
+                                source.tell() - 1),
+                            FutureWarning, stacklevel=nested + 6
+                        )
+                    code1 = LITERAL, _ord(this)
+                if sourcematch("-"):
+                    # potential range
+                    that = sourceget()
+                    if that is None:
+                        raise source.error("unterminated character set",
+                                           source.tell() - here)
+                    if that == "]":
+                        if code1[0] is IN:
+                            code1 = code1[1][0]
+                        setappend(code1)
+                        setappend((LITERAL, _ord("-")))
+                        break
+                    if that[0] == "\\":
+                        code2 = _class_escape(source, that)
+                    else:
+                        if that == '-':
+                            import warnings
+                            warnings.warn(
+                                'Possible set difference at position %d' % (
+                                    source.tell() - 2),
+                                FutureWarning, stacklevel=nested + 6
+                            )
+                        code2 = LITERAL, _ord(that)
+                    if code1[0] != LITERAL or code2[0] != LITERAL:
+                        msg = "bad character range %s-%s" % (this, that)
+                        raise source.error(msg, len(this) + 1 + len(that))
+                    lo = code1[1]
+                    hi = code2[1]
+                    if hi < lo:
+                        msg = "bad character range %s-%s" % (this, that)
+                        raise source.error(msg, len(this) + 1 + len(that))
+                    setappend((RANGE, (lo, hi)))
+                else:
+                    if code1[0] is IN:
+                        code1 = code1[1][0]
+                    setappend(code1)
+
+            set = _uniq(set)
+            # XXX: <fl> should move set optimization to compiler!
+            if _len(set) == 1 and set[0][0] is LITERAL:
+                # optimization
+                if negate:
+                    subpatternappend((NOT_LITERAL, set[0][1]))
+                else:
+                    subpatternappend(set[0])
+            else:
+                if negate:
+                    set.insert(0, (NEGATE, None))
+                # charmap optimization can't be added here because
+                # global flags still are not known
+                subpatternappend((IN, set))
+
+        elif this in REPEAT_CHARS:
+            # repeat previous item
+            here = source.tell()
+            if this == "?":
+                min, max = 0, 1
+            elif this == "*":
+                min, max = 0, MAXREPEAT
+
+            elif this == "+":
+                min, max = 1, MAXREPEAT
+            elif this == "{":
+                if source.next == "}":
+                    subpatternappend((LITERAL, _ord(this)))
+                    continue
+
+                min, max = 0, MAXREPEAT
+                lo = hi = ""
+                while source.next in DIGITS:
+                    lo += sourceget()
+                if sourcematch(","):
+                    while source.next in DIGITS:
+                        hi += sourceget()
+                else:
+                    hi = lo
+                if not sourcematch("}"):
+                    subpatternappend((LITERAL, _ord(this)))
+                    source.seek(here)
+                    continue
+
+                if lo:
+                    min = int(lo)
+                    if min >= MAXREPEAT:
+                        raise OverflowError("the repetition number is too large")
+                if hi:
+                    max = int(hi)
+                    if max >= MAXREPEAT:
+                        raise OverflowError("the repetition number is too large")
+                    if max < min:
+                        raise source.error("min repeat greater than max repeat",
+                                           source.tell() - here)
+            else:
+                raise AssertionError("unsupported quantifier %r" % (char,))
+            # figure out which item to repeat
+            if subpattern:
+                item = subpattern[-1:]
+            else:
+                item = None
+            if not item or item[0][0] is AT:
+                raise source.error("nothing to repeat",
+                                   source.tell() - here + len(this))
+            if item[0][0] in _REPEATCODES:
+                raise source.error("multiple repeat",
+                                   source.tell() - here + len(this))
+            if item[0][0] is SUBPATTERN:
+                group, add_flags, del_flags, p = item[0][1]
+                if group is None and not add_flags and not del_flags:
+                    item = p
+            if sourcematch("?"):
+                # Non-Greedy Match
+                subpattern[-1] = (MIN_REPEAT, (min, max, item))
+            elif sourcematch("+"):
+                # Possessive Match (Always Greedy)
+                subpattern[-1] = (POSSESSIVE_REPEAT, (min, max, item))
+            else:
+                # Greedy Match
+                subpattern[-1] = (MAX_REPEAT, (min, max, item))
+
+        elif this == ".":
+            subpatternappend((ANY, None))
+
+        elif this == "(":
+            start = source.tell() - 1
+            capture = True
+            atomic = False
+            name = None
+            add_flags = 0
+            del_flags = 0
+            if sourcematch("?"):
+                # options
+                char = sourceget()
+                if char is None:
+                    raise source.error("unexpected end of pattern")
+                if char == "P":
+                    # python extensions
+                    if sourcematch("<"):
+                        # named group: skip forward to end of name
+                        name = source.getuntil(">", "group name")
+                        source.checkgroupname(name, 1)
+                    elif sourcematch("="):
+                        # named backreference
+                        name = source.getuntil(")", "group name")
+                        source.checkgroupname(name, 1)
+                        gid = state.groupdict.get(name)
+                        if gid is None:
+                            msg = "unknown group name %r" % name
+                            raise source.error(msg, len(name) + 1)
+                        if not state.checkgroup(gid):
+                            raise source.error("cannot refer to an open group",
+                                               len(name) + 1)
+                        state.checklookbehindgroup(gid, source)
+                        subpatternappend((GROUPREF, gid))
+                        continue
+
+                    else:
+                        char = sourceget()
+                        if char is None:
+                            raise source.error("unexpected end of pattern")
+                        raise source.error("unknown extension ?P" + char,
+                                           len(char) + 2)
+                elif char == ":":
+                    # non-capturing group
+                    capture = False
+                elif char == "#":
+                    # comment
+                    while True:
+                        if source.next is None:
+                            raise source.error("missing ), unterminated comment",
+                                               source.tell() - start)
+                        if sourceget() == ")":
+                            break
+                    continue
+
+                elif char in "=!<":
+                    # lookahead assertions
+                    dir = 1
+                    if char == "<":
+                        char = sourceget()
+                        if char is None:
+                            raise source.error("unexpected end of pattern")
+                        if char not in "=!":
+                            raise source.error("unknown extension ?<" + char,
+                                               len(char) + 2)
+                        dir = -1 # lookbehind
+                        lookbehindgroups = state.lookbehindgroups
+                        if lookbehindgroups is None:
+                            state.lookbehindgroups = state.groups
+                    p = _parse_sub(source, state, verbose, nested + 1)
+                    if dir < 0:
+                        if lookbehindgroups is None:
+                            state.lookbehindgroups = None
+                    if not sourcematch(")"):
+                        raise source.error("missing ), unterminated subpattern",
+                                           source.tell() - start)
+                    if char == "=":
+                        subpatternappend((ASSERT, (dir, p)))
+                    elif p:
+                        subpatternappend((ASSERT_NOT, (dir, p)))
+                    else:
+                        subpatternappend((FAILURE, ()))
+                    continue
+
+                elif char == "(":
+                    # conditional backreference group
+                    condname = source.getuntil(")", "group name")
+                    if not (condname.isdecimal() and condname.isascii()):
+                        source.checkgroupname(condname, 1)
+                        condgroup = state.groupdict.get(condname)
+                        if condgroup is None:
+                            msg = "unknown group name %r" % condname
+                            raise source.error(msg, len(condname) + 1)
+                    else:
+                        condgroup = int(condname)
+                        if not condgroup:
+                            raise source.error("bad group number",
+                                               len(condname) + 1)
+                        if condgroup >= MAXGROUPS:
+                            msg = "invalid group reference %d" % condgroup
+                            raise source.error(msg, len(condname) + 1)
+                        if condgroup not in state.grouprefpos:
+                            state.grouprefpos[condgroup] = (
+                                source.tell() - len(condname) - 1
+                            )
+                    state.checklookbehindgroup(condgroup, source)
+                    item_yes = _parse(source, state, verbose, nested + 1)
+                    if source.match("|"):
+                        item_no = _parse(source, state, verbose, nested + 1)
+                        if source.next == "|":
+                            raise source.error("conditional backref with more than two branches")
+                    else:
+                        item_no = None
+                    if not source.match(")"):
+                        raise source.error("missing ), unterminated subpattern",
+                                           source.tell() - start)
+                    subpatternappend((GROUPREF_EXISTS, (condgroup, item_yes, item_no)))
+                    continue
+
+                elif char == ">":
+                    # non-capturing, atomic group
+                    capture = False
+                    atomic = True
+                elif char in FLAGS or char == "-":
+                    # flags
+                    flags = _parse_flags(source, state, char)
+                    if flags is None:  # global flags
+                        if not first or subpattern:
+                            raise source.error('global flags not at the start '
+                                               'of the expression',
+                                               source.tell() - start)
+                        verbose = state.flags & SRE_FLAG_VERBOSE
+                        continue
+
+                    add_flags, del_flags = flags
+                    capture = False
+                else:
+                    raise source.error("unknown extension ?" + char,
+                                       len(char) + 1)
+
+            # parse group contents
+            if capture:
+                try:
+                    group = state.opengroup(name)
+                except error as err:
+                    raise source.error(err.msg, len(name) + 1) from None
+            else:
+                group = None
+            sub_verbose = ((verbose or (add_flags & SRE_FLAG_VERBOSE)) and
+                           not (del_flags & SRE_FLAG_VERBOSE))
+            p = _parse_sub(source, state, sub_verbose, nested + 1)
+            if not source.match(")"):
+                raise source.error("missing ), unterminated subpattern",
+                                   source.tell() - start)
+            if group is not None:
+                state.closegroup(group, p)
+            if atomic:
+                assert group is None
+                subpatternappend((ATOMIC_GROUP, p))
+            else:
+                subpatternappend((SUBPATTERN, (group, add_flags, del_flags, p)))
+
+        elif this == "^":
+            subpatternappend((AT, AT_BEGINNING))
+
+        elif this == "$":
+            subpatternappend((AT, AT_END))
+
+        else:
+            raise AssertionError("unsupported special character %r" % (char,))
+
+    # unpack non-capturing groups
+    for i in range(len(subpattern))[::-1]:
+        op, av = subpattern[i]
+        if op is SUBPATTERN:
+            group, add_flags, del_flags, p = av
+            if group is None and not add_flags and not del_flags:
+                subpattern[i: i+1] = p
+
+    return subpattern
+
+def _parse_flags(source, state, char):
+    sourceget = source.get
+    add_flags = 0
+    del_flags = 0
+    if char != "-":
+        while True:
+            flag = FLAGS[char]
+            if source.istext:
+                if char == 'L':
+                    msg = "bad inline flags: cannot use 'L' flag with a str pattern"
+                    raise source.error(msg)
+            else:
+                if char == 'u':
+                    msg = "bad inline flags: cannot use 'u' flag with a bytes pattern"
+                    raise source.error(msg)
+            add_flags |= flag
+            if (flag & TYPE_FLAGS) and (add_flags & TYPE_FLAGS) != flag:
+                msg = "bad inline flags: flags 'a', 'u' and 'L' are incompatible"
+                raise source.error(msg)
+            char = sourceget()
+            if char is None:
+                raise source.error("missing -, : or )")
+            if char in ")-:":
+                break
+            if char not in FLAGS:
+                msg = "unknown flag" if char.isalpha() else "missing -, : or )"
+                raise source.error(msg, len(char))
+    if char == ")":
+        state.flags |= add_flags
+        return None
+    if add_flags & GLOBAL_FLAGS:
+        raise source.error("bad inline flags: cannot turn on global flag", 1)
+    if char == "-":
+        char = sourceget()
+        if char is None:
+            raise source.error("missing flag")
+        if char not in FLAGS:
+            msg = "unknown flag" if char.isalpha() else "missing flag"
+            raise source.error(msg, len(char))
+        while True:
+            flag = FLAGS[char]
+            if flag & TYPE_FLAGS:
+                msg = "bad inline flags: cannot turn off flags 'a', 'u' and 'L'"
+                raise source.error(msg)
+            del_flags |= flag
+            char = sourceget()
+            if char is None:
+                raise source.error("missing :")
+            if char == ":":
+                break
+            if char not in FLAGS:
+                msg = "unknown flag" if char.isalpha() else "missing :"
+                raise source.error(msg, len(char))
+    assert char == ":"
+    if del_flags & GLOBAL_FLAGS:
+        raise source.error("bad inline flags: cannot turn off global flag", 1)
+    if add_flags & del_flags:
+        raise source.error("bad inline flags: flag turned on and off", 1)
+    return add_flags, del_flags
+
+def fix_flags(src, flags):
+    # Check and fix flags according to the type of pattern (str or bytes)
+    if isinstance(src, str):
+        if flags & SRE_FLAG_LOCALE:
+            raise ValueError("cannot use LOCALE flag with a str pattern")
+        if not flags & SRE_FLAG_ASCII:
+            flags |= SRE_FLAG_UNICODE
+        elif flags & SRE_FLAG_UNICODE:
+            raise ValueError("ASCII and UNICODE flags are incompatible")
+    else:
+        if flags & SRE_FLAG_UNICODE:
+            raise ValueError("cannot use UNICODE flag with a bytes pattern")
+        if flags & SRE_FLAG_LOCALE and flags & SRE_FLAG_ASCII:
+            raise ValueError("ASCII and LOCALE flags are incompatible")
+    return flags
+
+def parse(str, flags=0, state=None):
+    # parse 're' pattern into list of (opcode, argument) tuples
+
+    source = Tokenizer(str)
+
+    if state is None:
+        state = State()
+    state.flags = flags
+    state.str = str
+
+    p = _parse_sub(source, state, flags & SRE_FLAG_VERBOSE, 0)
+    p.state.flags = fix_flags(str, p.state.flags)
+
+    if source.next is not None:
+        assert source.next == ")"
+        raise source.error("unbalanced parenthesis")
+
+    for g in p.state.grouprefpos:
+        if g >= p.state.groups:
+            msg = "invalid group reference %d" % g
+            raise error(msg, str, p.state.grouprefpos[g])
+
+    if flags & SRE_FLAG_DEBUG:
+        p.dump()
+
+    return p
+
+def parse_template(source, pattern):
+    # parse 're' replacement string into list of literals and
+    # group references
+    s = Tokenizer(source)
+    sget = s.get
+    result = []
+    literal = []
+    lappend = literal.append
+    def addliteral():
+        if s.istext:
+            result.append(''.join(literal))
+        else:
+            # The tokenizer implicitly decodes bytes objects as latin-1, we must
+            # therefore re-encode the final representation.
+            result.append(''.join(literal).encode('latin-1'))
+        del literal[:]
+    def addgroup(index, pos):
+        if index > pattern.groups:
+            raise s.error("invalid group reference %d" % index, pos)
+        addliteral()
+        result.append(index)
+    groupindex = pattern.groupindex
+    while True:
+        this = sget()
+        if this is None:
+            break # end of replacement string
+        if this[0] == "\\":
+            # group
+            c = this[1]
+            if c == "g":
+                if not s.match("<"):
+                    raise s.error("missing <")
+                name = s.getuntil(">", "group name")
+                if not (name.isdecimal() and name.isascii()):
+                    s.checkgroupname(name, 1)
+                    try:
+                        index = groupindex[name]
+                    except KeyError:
+                        raise IndexError("unknown group name %r" % name) from None
+                else:
+                    index = int(name)
+                    if index >= MAXGROUPS:
+                        raise s.error("invalid group reference %d" % index,
+                                      len(name) + 1)
+                addgroup(index, len(name) + 1)
+            elif c == "0":
+                if s.next in OCTDIGITS:
+                    this += sget()
+                    if s.next in OCTDIGITS:
+                        this += sget()
+                lappend(chr(int(this[1:], 8) & 0xff))
+            elif c in DIGITS:
+                isoctal = False
+                if s.next in DIGITS:
+                    this += sget()
+                    if (c in OCTDIGITS and this[2] in OCTDIGITS and
+                        s.next in OCTDIGITS):
+                        this += sget()
+                        isoctal = True
+                        c = int(this[1:], 8)
+                        if c > 0o377:
+                            raise s.error('octal escape value %s outside of '
+                                          'range 0-0o377' % this, len(this))
+                        lappend(chr(c))
+                if not isoctal:
+                    addgroup(int(this[1:]), len(this) - 1)
+            else:
+                try:
+                    this = chr(ESCAPES[this][1])
+                except KeyError:
+                    if c in ASCIILETTERS:
+                        raise s.error('bad escape %s' % this, len(this)) from None
+                lappend(this)
+        else:
+            lappend(this)
+    addliteral()
+    return result
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/site-packages/README.txt b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/site-packages/README.txt
new file mode 100644
index 0000000000000000000000000000000000000000..273f6251a7f9d9c4142522e9ab1d699a8ab1bad6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/site-packages/README.txt
@@ -0,0 +1,2 @@
+This directory exists so that 3rd party packages can be installed
+here.  Read the source for site.py for more details.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..ed727fae609d1dfc282bb0fe95ffc025ad8e0673
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__init__.py
@@ -0,0 +1,57 @@
+# pysqlite2/__init__.py: the pysqlite2 package.
+#
+# Copyright (C) 2005 Gerhard Häring <gh@ghaering.de>
+#
+# This file is part of pysqlite.
+#
+# This software is provided 'as-is', without any express or implied
+# warranty.  In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+#    claim that you wrote the original software. If you use this software
+#    in a product, an acknowledgment in the product documentation would be
+#    appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+#    misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+"""
+The sqlite3 extension module provides a DB-API 2.0 (PEP 249) compliant
+interface to the SQLite library, and requires SQLite 3.15.2 or newer.
+
+To use the module, start by creating a database Connection object:
+
+    import sqlite3
+    cx = sqlite3.connect("test.db")  # test.db will be created or opened
+
+The special path name ":memory:" can be provided to connect to a transient
+in-memory database:
+
+    cx = sqlite3.connect(":memory:")  # connect to a database in RAM
+
+Once a connection has been established, create a Cursor object and call
+its execute() method to perform SQL queries:
+
+    cu = cx.cursor()
+
+    # create a table
+    cu.execute("create table lang(name, first_appeared)")
+
+    # insert values into a table
+    cu.execute("insert into lang values (?, ?)", ("C", 1972))
+
+    # execute a query and iterate over the result
+    for row in cu.execute("select * from lang"):
+        print(row)
+
+    cx.close()
+
+The sqlite3 module is written by Gerhard Häring <gh@ghaering.de>.
+"""
+
+from sqlite3.dbapi2 import *
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..4ccf292ddf211c271922310aeb886a87d84ab5db
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/__main__.py
@@ -0,0 +1,139 @@
+"""A simple SQLite CLI for the sqlite3 module.
+
+Apart from using 'argparse' for the command-line interface,
+this module implements the REPL as a thin wrapper around
+the InteractiveConsole class from the 'code' stdlib module.
+"""
+import sqlite3
+import sys
+
+from argparse import ArgumentParser
+from code import InteractiveConsole
+from textwrap import dedent
+
+
+def execute(c, sql, suppress_errors=True):
+    """Helper that wraps execution of SQL code.
+
+    This is used both by the REPL and by direct execution from the CLI.
+
+    'c' may be a cursor or a connection.
+    'sql' is the SQL string to execute.
+    """
+
+    try:
+        for row in c.execute(sql):
+            print(row)
+    except sqlite3.Error as e:
+        tp = type(e).__name__
+        try:
+            print(f"{tp} ({e.sqlite_errorname}): {e}", file=sys.stderr)
+        except AttributeError:
+            print(f"{tp}: {e}", file=sys.stderr)
+        if not suppress_errors:
+            sys.exit(1)
+
+
+class SqliteInteractiveConsole(InteractiveConsole):
+    """A simple SQLite REPL."""
+
+    def __init__(self, connection):
+        super().__init__()
+        self._con = connection
+        self._cur = connection.cursor()
+
+    def runsource(self, source, filename="<input>", symbol="single"):
+        """Override runsource, the core of the InteractiveConsole REPL.
+
+        Return True if more input is needed; buffering is done automatically.
+        Return False if input is a complete statement ready for execution.
+        """
+        if not source or source.isspace():
+            return False
+        if source[0] == ".":
+            match source[1:].strip():
+                case "version":
+                    print(f"{sqlite3.sqlite_version}")
+                case "help":
+                    print("Enter SQL code and press enter.")
+                case "quit":
+                    sys.exit(0)
+                case "":
+                    pass
+                case _ as unknown:
+                    self.write("Error: unknown command or invalid arguments:"
+                               f'  "{unknown}".\n')
+        else:
+            if not sqlite3.complete_statement(source):
+                return True
+            execute(self._cur, source)
+        return False
+
+
+def main(*args):
+    parser = ArgumentParser(
+        description="Python sqlite3 CLI",
+        color=True,
+    )
+    parser.add_argument(
+        "filename", type=str, default=":memory:", nargs="?",
+        help=(
+            "SQLite database to open (defaults to ':memory:'). "
+            "A new database is created if the file does not previously exist."
+        ),
+    )
+    parser.add_argument(
+        "sql", type=str, nargs="?",
+        help=(
+            "An SQL query to execute. "
+            "Any returned rows are printed to stdout."
+        ),
+    )
+    parser.add_argument(
+        "-v", "--version", action="version",
+        version=f"SQLite version {sqlite3.sqlite_version}",
+        help="Print underlying SQLite library version",
+    )
+    args = parser.parse_args(*args)
+
+    if args.filename == ":memory:":
+        db_name = "a transient in-memory database"
+    else:
+        db_name = repr(args.filename)
+
+    # Prepare REPL banner and prompts.
+    if sys.platform == "win32" and "idlelib.run" not in sys.modules:
+        eofkey = "CTRL-Z"
+    else:
+        eofkey = "CTRL-D"
+    banner = dedent(f"""
+        sqlite3 shell, running on SQLite version {sqlite3.sqlite_version}
+        Connected to {db_name}
+
+        Each command will be run using execute() on the cursor.
+        Type ".help" for more information; type ".quit" or {eofkey} to quit.
+    """).strip()
+    sys.ps1 = "sqlite> "
+    sys.ps2 = "    ... "
+
+    con = sqlite3.connect(args.filename, isolation_level=None)
+    try:
+        if args.sql:
+            # SQL statement provided on the command-line; execute it directly.
+            execute(con, args.sql, suppress_errors=False)
+        else:
+            # No SQL provided; start the REPL.
+            console = SqliteInteractiveConsole(con)
+            try:
+                import readline  # noqa: F401
+            except ImportError:
+                pass
+            console.interact(banner, exitmsg="")
+    finally:
+        con.close()
+
+    sys.exit(0)
+
+
+if __name__ == "__main__":
+    main(sys.argv[1:])
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dbapi2.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dbapi2.py
new file mode 100644
index 0000000000000000000000000000000000000000..0315760516edf825dc9069e1690b0ff810236c7b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dbapi2.py
@@ -0,0 +1,96 @@
+# pysqlite2/dbapi2.py: the DB-API 2.0 interface
+#
+# Copyright (C) 2004-2005 Gerhard Häring <gh@ghaering.de>
+#
+# This file is part of pysqlite.
+#
+# This software is provided 'as-is', without any express or implied
+# warranty.  In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+#    claim that you wrote the original software. If you use this software
+#    in a product, an acknowledgment in the product documentation would be
+#    appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+#    misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+import datetime
+import time
+import collections.abc
+
+from _sqlite3 import *
+
+paramstyle = "qmark"
+
+apilevel = "2.0"
+
+Date = datetime.date
+
+Time = datetime.time
+
+Timestamp = datetime.datetime
+
+def DateFromTicks(ticks):
+    return Date(*time.localtime(ticks)[:3])
+
+def TimeFromTicks(ticks):
+    return Time(*time.localtime(ticks)[3:6])
+
+def TimestampFromTicks(ticks):
+    return Timestamp(*time.localtime(ticks)[:6])
+
+
+sqlite_version_info = tuple([int(x) for x in sqlite_version.split(".")])
+
+Binary = memoryview
+collections.abc.Sequence.register(Row)
+
+def register_adapters_and_converters():
+    from warnings import warn
+
+    msg = ("The default {what} is deprecated as of Python 3.12; "
+           "see the sqlite3 documentation for suggested replacement recipes")
+
+    def adapt_date(val):
+        warn(msg.format(what="date adapter"), DeprecationWarning, stacklevel=2)
+        return val.isoformat()
+
+    def adapt_datetime(val):
+        warn(msg.format(what="datetime adapter"), DeprecationWarning, stacklevel=2)
+        return val.isoformat(" ")
+
+    def convert_date(val):
+        warn(msg.format(what="date converter"), DeprecationWarning, stacklevel=2)
+        return datetime.date(*map(int, val.split(b"-")))
+
+    def convert_timestamp(val):
+        warn(msg.format(what="timestamp converter"), DeprecationWarning, stacklevel=2)
+        datepart, timepart = val.split(b" ")
+        year, month, day = map(int, datepart.split(b"-"))
+        timepart_full = timepart.split(b".")
+        hours, minutes, seconds = map(int, timepart_full[0].split(b":"))
+        if len(timepart_full) == 2:
+            microseconds = int('{:0<6.6}'.format(timepart_full[1].decode()))
+        else:
+            microseconds = 0
+
+        val = datetime.datetime(year, month, day, hours, minutes, seconds, microseconds)
+        return val
+
+
+    register_adapter(datetime.date, adapt_date)
+    register_adapter(datetime.datetime, adapt_datetime)
+    register_converter("date", convert_date)
+    register_converter("timestamp", convert_timestamp)
+
+register_adapters_and_converters()
+
+# Clean up namespace
+
+del(register_adapters_and_converters)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dump.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dump.py
new file mode 100644
index 0000000000000000000000000000000000000000..57e6a3b4f1e6eba0d399d09dbe0df157f36d93b9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sqlite3/dump.py
@@ -0,0 +1,113 @@
+# Mimic the sqlite3 console shell's .dump command
+# Author: Paul Kippes <kippesp@gmail.com>
+
+# Every identifier in sql is quoted based on a comment in sqlite
+# documentation "SQLite adds new keywords from time to time when it
+# takes on new features. So to prevent your code from being broken by
+# future enhancements, you should normally quote any identifier that
+# is an English language word, even if you do not have to."
+
+def _quote_name(name):
+    return '"{0}"'.format(name.replace('"', '""'))
+
+
+def _quote_value(value):
+    return "'{0}'".format(value.replace("'", "''"))
+
+
+def _iterdump(connection, *, filter=None):
+    """
+    Returns an iterator to the dump of the database in an SQL text format.
+
+    Used to produce an SQL dump of the database.  Useful to save an in-memory
+    database for later restoration.  This function should not be called
+    directly but instead called from the Connection method, iterdump().
+    """
+
+    writeable_schema = False
+    cu = connection.cursor()
+    cu.row_factory = None  # Make sure we get predictable results.
+    # Disable foreign key constraints, if there is any foreign key violation.
+    violations = cu.execute("PRAGMA foreign_key_check").fetchall()
+    if violations:
+        yield('PRAGMA foreign_keys=OFF;')
+    yield('BEGIN TRANSACTION;')
+
+    if filter:
+        # Return database objects which match the filter pattern.
+        filter_name_clause = 'AND "name" LIKE ?'
+        params = [filter]
+    else:
+        filter_name_clause = ""
+        params = []
+    # sqlite_master table contains the SQL CREATE statements for the database.
+    q = f"""
+        SELECT "name", "type", "sql"
+        FROM "sqlite_master"
+            WHERE "sql" NOT NULL AND
+            "type" == 'table'
+            {filter_name_clause}
+            ORDER BY "name"
+        """
+    schema_res = cu.execute(q, params)
+    sqlite_sequence = []
+    for table_name, type, sql in schema_res.fetchall():
+        if table_name == 'sqlite_sequence':
+            rows = cu.execute('SELECT * FROM "sqlite_sequence";')
+            sqlite_sequence = ['DELETE FROM "sqlite_sequence"']
+            sqlite_sequence += [
+                f'INSERT INTO "sqlite_sequence" VALUES({_quote_value(table_name)},{seq_value})'
+                for table_name, seq_value in rows.fetchall()
+            ]
+            continue
+        elif table_name == 'sqlite_stat1':
+            yield('ANALYZE "sqlite_master";')
+        elif table_name.startswith('sqlite_'):
+            continue
+        elif sql.startswith('CREATE VIRTUAL TABLE'):
+            if not writeable_schema:
+                writeable_schema = True
+                yield('PRAGMA writable_schema=ON;')
+            yield("INSERT INTO sqlite_master(type,name,tbl_name,rootpage,sql)"
+                  "VALUES('table',{0},{0},0,{1});".format(
+                      _quote_value(table_name),
+                      _quote_value(sql),
+                  ))
+        else:
+            yield('{0};'.format(sql))
+
+        # Build the insert statement for each row of the current table
+        table_name_ident = _quote_name(table_name)
+        res = cu.execute(f'PRAGMA table_info({table_name_ident})')
+        column_names = [str(table_info[1]) for table_info in res.fetchall()]
+        q = "SELECT 'INSERT INTO {0} VALUES('{1}')' FROM {0};".format(
+            table_name_ident,
+            "','".join(
+                "||quote({0})||".format(_quote_name(col)) for col in column_names
+            )
+        )
+        query_res = cu.execute(q)
+        for row in query_res:
+            yield("{0};".format(row[0]))
+
+    # Now when the type is 'index', 'trigger', or 'view'
+    q = f"""
+        SELECT "name", "type", "sql"
+        FROM "sqlite_master"
+            WHERE "sql" NOT NULL AND
+            "type" IN ('index', 'trigger', 'view')
+            {filter_name_clause}
+        """
+    schema_res = cu.execute(q, params)
+    for name, type, sql in schema_res.fetchall():
+        yield('{0};'.format(sql))
+
+    if writeable_schema:
+        yield('PRAGMA writable_schema=OFF;')
+
+    # gh-79009: Yield statements concerning the sqlite_sequence table at the
+    # end of the transaction.
+    for row in sqlite_sequence:
+        yield('{0};'.format(row))
+
+    yield('COMMIT;')
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..eab5067c9b133ea1210efacd92eb5f69c2336236
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/__init__.py
@@ -0,0 +1,325 @@
+"""A collection of string constants.
+
+Public module variables:
+
+whitespace -- a string containing all ASCII whitespace
+ascii_lowercase -- a string containing all ASCII lowercase letters
+ascii_uppercase -- a string containing all ASCII uppercase letters
+ascii_letters -- a string containing all ASCII letters
+digits -- a string containing all ASCII decimal digits
+hexdigits -- a string containing all ASCII hexadecimal digits
+octdigits -- a string containing all ASCII octal digits
+punctuation -- a string containing all ASCII punctuation characters
+printable -- a string containing all ASCII characters considered printable
+
+"""
+
+__all__ = ["ascii_letters", "ascii_lowercase", "ascii_uppercase", "capwords",
+           "digits", "hexdigits", "octdigits", "printable", "punctuation",
+           "whitespace", "Formatter", "Template"]
+
+import _string
+
+# Some strings for ctype-style character classification
+whitespace = ' \t\n\r\v\f'
+ascii_lowercase = 'abcdefghijklmnopqrstuvwxyz'
+ascii_uppercase = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+ascii_letters = ascii_lowercase + ascii_uppercase
+digits = '0123456789'
+hexdigits = digits + 'abcdef' + 'ABCDEF'
+octdigits = '01234567'
+punctuation = r"""!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~"""
+printable = digits + ascii_letters + punctuation + whitespace
+
+# Functions which aren't available as string methods.
+
+# Capitalize the words in a string, e.g. " aBc  dEf " -> "Abc Def".
+def capwords(s, sep=None):
+    """capwords(s [,sep]) -> string
+
+    Split the argument into words using split, capitalize each
+    word using capitalize, and join the capitalized words using
+    join.  If the optional second argument sep is absent or None,
+    runs of whitespace characters are replaced by a single space
+    and leading and trailing whitespace are removed, otherwise
+    sep is used to split and join the words.
+
+    """
+    return (sep or ' ').join(map(str.capitalize, s.split(sep)))
+
+
+####################################################################
+_sentinel_dict = {}
+
+
+class _TemplatePattern:
+    # This descriptor is overwritten in ``Template._compile_pattern()``.
+    def __get__(self, instance, cls=None):
+        if cls is None:
+            return self
+        return cls._compile_pattern()
+_TemplatePattern = _TemplatePattern()
+
+
+class Template:
+    """A string class for supporting $-substitutions."""
+
+    delimiter = '$'
+    # r'[a-z]' matches to non-ASCII letters when used with IGNORECASE, but
+    # without the ASCII flag.  We can't add re.ASCII to flags because of
+    # backward compatibility.  So we use the ?a local flag and [a-z] pattern.
+    # See https://bugs.python.org/issue31672
+    idpattern = r'(?a:[_a-z][_a-z0-9]*)'
+    braceidpattern = None
+    flags = None  # default: re.IGNORECASE
+
+    pattern = _TemplatePattern  # use a descriptor to compile the pattern
+
+    def __init_subclass__(cls):
+        super().__init_subclass__()
+        cls._compile_pattern()
+
+    @classmethod
+    def _compile_pattern(cls):
+        import re  # deferred import, for performance
+
+        pattern = cls.__dict__.get('pattern', _TemplatePattern)
+        if pattern is _TemplatePattern:
+            delim = re.escape(cls.delimiter)
+            id = cls.idpattern
+            bid = cls.braceidpattern or cls.idpattern
+            pattern = fr"""
+            {delim}(?:
+              (?P<escaped>{delim})  |   # Escape sequence of two delimiters
+              (?P<named>{id})       |   # delimiter and a Python identifier
+              {{(?P<braced>{bid})}} |   # delimiter and a braced identifier
+              (?P<invalid>)             # Other ill-formed delimiter exprs
+            )
+            """
+        if cls.flags is None:
+            cls.flags = re.IGNORECASE
+        pat = cls.pattern = re.compile(pattern, cls.flags | re.VERBOSE)
+        return pat
+
+    def __init__(self, template):
+        self.template = template
+
+    # Search for $$, $identifier, ${identifier}, and any bare $'s
+
+    def _invalid(self, mo):
+        i = mo.start('invalid')
+        lines = self.template[:i].splitlines(keepends=True)
+        if not lines:
+            colno = 1
+            lineno = 1
+        else:
+            colno = i - len(''.join(lines[:-1]))
+            lineno = len(lines)
+        raise ValueError('Invalid placeholder in string: line %d, col %d' %
+                         (lineno, colno))
+
+    def substitute(self, mapping=_sentinel_dict, /, **kws):
+        if mapping is _sentinel_dict:
+            mapping = kws
+        elif kws:
+            from collections import ChainMap
+            mapping = ChainMap(kws, mapping)
+        # Helper function for .sub()
+        def convert(mo):
+            # Check the most common path first.
+            named = mo.group('named') or mo.group('braced')
+            if named is not None:
+                return str(mapping[named])
+            if mo.group('escaped') is not None:
+                return self.delimiter
+            if mo.group('invalid') is not None:
+                self._invalid(mo)
+            raise ValueError('Unrecognized named group in pattern',
+                             self.pattern)
+        return self.pattern.sub(convert, self.template)
+
+    def safe_substitute(self, mapping=_sentinel_dict, /, **kws):
+        if mapping is _sentinel_dict:
+            mapping = kws
+        elif kws:
+            from collections import ChainMap
+            mapping = ChainMap(kws, mapping)
+        # Helper function for .sub()
+        def convert(mo):
+            named = mo.group('named') or mo.group('braced')
+            if named is not None:
+                try:
+                    return str(mapping[named])
+                except KeyError:
+                    return mo.group()
+            if mo.group('escaped') is not None:
+                return self.delimiter
+            if mo.group('invalid') is not None:
+                return mo.group()
+            raise ValueError('Unrecognized named group in pattern',
+                             self.pattern)
+        return self.pattern.sub(convert, self.template)
+
+    def is_valid(self):
+        for mo in self.pattern.finditer(self.template):
+            if mo.group('invalid') is not None:
+                return False
+            if (mo.group('named') is None
+                and mo.group('braced') is None
+                and mo.group('escaped') is None):
+                # If all the groups are None, there must be
+                # another group we're not expecting
+                raise ValueError('Unrecognized named group in pattern',
+                    self.pattern)
+        return True
+
+    def get_identifiers(self):
+        ids = []
+        for mo in self.pattern.finditer(self.template):
+            named = mo.group('named') or mo.group('braced')
+            if named is not None and named not in ids:
+                # add a named group only the first time it appears
+                ids.append(named)
+            elif (named is None
+                and mo.group('invalid') is None
+                and mo.group('escaped') is None):
+                # If all the groups are None, there must be
+                # another group we're not expecting
+                raise ValueError('Unrecognized named group in pattern',
+                    self.pattern)
+        return ids
+
+
+########################################################################
+# the Formatter class
+# see PEP 3101 for details and purpose of this class
+
+# The hard parts are reused from the C implementation.  They're exposed as "_"
+# prefixed methods of str.
+
+# The overall parser is implemented in _string.formatter_parser.
+# The field name parser is implemented in _string.formatter_field_name_split
+
+class Formatter:
+    def format(self, format_string, /, *args, **kwargs):
+        return self.vformat(format_string, args, kwargs)
+
+    def vformat(self, format_string, args, kwargs):
+        used_args = set()
+        result, _ = self._vformat(format_string, args, kwargs, used_args, 2)
+        self.check_unused_args(used_args, args, kwargs)
+        return result
+
+    def _vformat(self, format_string, args, kwargs, used_args, recursion_depth,
+                 auto_arg_index=0):
+        if recursion_depth < 0:
+            raise ValueError('Max string recursion exceeded')
+        result = []
+        for literal_text, field_name, format_spec, conversion in \
+                self.parse(format_string):
+
+            # output the literal text
+            if literal_text:
+                result.append(literal_text)
+
+            # if there's a field, output it
+            if field_name is not None:
+                # this is some markup, find the object and do
+                #  the formatting
+
+                # handle arg indexing when empty field first parts are given.
+                field_first, _ = _string.formatter_field_name_split(field_name)
+                if field_first == '':
+                    if auto_arg_index is False:
+                        raise ValueError('cannot switch from manual field '
+                                         'specification to automatic field '
+                                         'numbering')
+                    field_name = str(auto_arg_index) + field_name
+                    auto_arg_index += 1
+                elif isinstance(field_first, int):
+                    if auto_arg_index:
+                        raise ValueError('cannot switch from automatic field '
+                                         'numbering to manual field '
+                                         'specification')
+                    # disable auto arg incrementing, if it gets
+                    # used later on, then an exception will be raised
+                    auto_arg_index = False
+
+                # given the field_name, find the object it references
+                #  and the argument it came from
+                obj, arg_used = self.get_field(field_name, args, kwargs)
+                used_args.add(arg_used)
+
+                # do any conversion on the resulting object
+                obj = self.convert_field(obj, conversion)
+
+                # expand the format spec, if needed
+                format_spec, auto_arg_index = self._vformat(
+                    format_spec, args, kwargs,
+                    used_args, recursion_depth-1,
+                    auto_arg_index=auto_arg_index)
+
+                # format the object and append to the result
+                result.append(self.format_field(obj, format_spec))
+
+        return ''.join(result), auto_arg_index
+
+
+    def get_value(self, key, args, kwargs):
+        if isinstance(key, int):
+            return args[key]
+        else:
+            return kwargs[key]
+
+
+    def check_unused_args(self, used_args, args, kwargs):
+        pass
+
+
+    def format_field(self, value, format_spec):
+        return format(value, format_spec)
+
+
+    def convert_field(self, value, conversion):
+        # do any conversion on the resulting object
+        if conversion is None:
+            return value
+        elif conversion == 's':
+            return str(value)
+        elif conversion == 'r':
+            return repr(value)
+        elif conversion == 'a':
+            return ascii(value)
+        raise ValueError("Unknown conversion specifier {0!s}".format(conversion))
+
+
+    # returns an iterable that contains tuples of the form:
+    # (literal_text, field_name, format_spec, conversion)
+    # literal_text can be zero length
+    # field_name can be None, in which case there's no
+    #  object to format and output
+    # if field_name is not None, it is looked up, formatted
+    #  with format_spec and conversion and then used
+    def parse(self, format_string):
+        return _string.formatter_parser(format_string)
+
+
+    # given a field_name, find the object it references.
+    #  field_name:   the field being looked up, e.g. "0.name"
+    #                 or "lookup[3]"
+    #  used_args:    a set of which args have been used
+    #  args, kwargs: as passed in to vformat
+    def get_field(self, field_name, args, kwargs):
+        first, rest = _string.formatter_field_name_split(field_name)
+
+        obj = self.get_value(first, args, kwargs)
+
+        # loop through the rest of the field_name, doing
+        #  getattr or getitem as needed
+        for is_attr, i in rest:
+            if is_attr:
+                obj = getattr(obj, i)
+            else:
+                obj = obj[i]
+
+        return obj, first
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/templatelib.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/templatelib.py
new file mode 100644
index 0000000000000000000000000000000000000000..8164872432ad09ecabaf1aceb343e6bc4a097f7d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/string/templatelib.py
@@ -0,0 +1,33 @@
+"""Support for template string literals (t-strings)."""
+
+t = t"{0}"
+Template = type(t)
+Interpolation = type(t.interpolations[0])
+del t
+
+def convert(obj, /, conversion):
+    """Convert *obj* using formatted string literal semantics."""
+    if conversion is None:
+        return obj
+    if conversion == 'r':
+        return repr(obj)
+    if conversion == 's':
+        return str(obj)
+    if conversion == 'a':
+        return ascii(obj)
+    raise ValueError(f'invalid conversion specifier: {conversion}')
+
+def _template_unpickle(*args):
+    import itertools
+
+    if len(args) != 2:
+        raise ValueError('Template expects tuple of length 2 to unpickle')
+
+    strings, interpolations = args
+    parts = []
+    for string, interpolation in itertools.zip_longest(strings, interpolations):
+        if string is not None:
+            parts.append(string)
+        if interpolation is not None:
+            parts.append(interpolation)
+    return Template(*parts)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..9e6d9257cf798e43ad2f85b8fad3c5c84933e760
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__init__.py
@@ -0,0 +1,799 @@
+"""Access to Python's configuration information."""
+
+import os
+import sys
+import threading
+from os.path import realpath
+
+__all__ = [
+    'get_config_h_filename',
+    'get_config_var',
+    'get_config_vars',
+    'get_makefile_filename',
+    'get_path',
+    'get_path_names',
+    'get_paths',
+    'get_platform',
+    'get_python_version',
+    'get_scheme_names',
+    'parse_config_h',
+]
+
+# Keys for get_config_var() that are never converted to Python integers.
+_ALWAYS_STR = {
+    'IPHONEOS_DEPLOYMENT_TARGET',
+    'MACOSX_DEPLOYMENT_TARGET',
+}
+
+_INSTALL_SCHEMES = {
+    'posix_prefix': {
+        'stdlib': '{installed_base}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+        'platstdlib': '{platbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+        'purelib': '{base}/lib/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+        'platlib': '{platbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+        'include':
+            '{installed_base}/include/{implementation_lower}{py_version_short}{abiflags}',
+        'platinclude':
+            '{installed_platbase}/include/{implementation_lower}{py_version_short}{abiflags}',
+        'scripts': '{base}/bin',
+        'data': '{base}',
+        },
+    'posix_home': {
+        'stdlib': '{installed_base}/lib/{implementation_lower}',
+        'platstdlib': '{base}/lib/{implementation_lower}',
+        'purelib': '{base}/lib/{implementation_lower}',
+        'platlib': '{base}/lib/{implementation_lower}',
+        'include': '{installed_base}/include/{implementation_lower}',
+        'platinclude': '{installed_base}/include/{implementation_lower}',
+        'scripts': '{base}/bin',
+        'data': '{base}',
+        },
+    'nt': {
+        'stdlib': '{installed_base}/Lib',
+        'platstdlib': '{base}/Lib',
+        'purelib': '{base}/Lib/site-packages',
+        'platlib': '{base}/Lib/site-packages',
+        'include': '{installed_base}/Include',
+        'platinclude': '{installed_base}/Include',
+        'scripts': '{base}/Scripts',
+        'data': '{base}',
+        },
+
+    # Downstream distributors can overwrite the default install scheme.
+    # This is done to support downstream modifications where distributors change
+    # the installation layout (eg. different site-packages directory).
+    # So, distributors will change the default scheme to one that correctly
+    # represents their layout.
+    # This presents an issue for projects/people that need to bootstrap virtual
+    # environments, like virtualenv. As distributors might now be customizing
+    # the default install scheme, there is no guarantee that the information
+    # returned by sysconfig.get_default_scheme/get_paths is correct for
+    # a virtual environment, the only guarantee we have is that it is correct
+    # for the *current* environment. When bootstrapping a virtual environment,
+    # we need to know its layout, so that we can place the files in the
+    # correct locations.
+    # The "*_venv" install scheme is a scheme to bootstrap virtual environments,
+    # essentially identical to the default posix_prefix/nt schemes.
+    # Downstream distributors who patch posix_prefix/nt scheme are encouraged to
+    # leave the following schemes unchanged
+    'posix_venv': {
+        'stdlib': '{installed_base}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+        'platstdlib': '{platbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+        'purelib': '{base}/lib/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+        'platlib': '{platbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+        'include':
+            '{installed_base}/include/{implementation_lower}{py_version_short}{abiflags}',
+        'platinclude':
+            '{installed_platbase}/include/{implementation_lower}{py_version_short}{abiflags}',
+        'scripts': '{base}/bin',
+        'data': '{base}',
+        },
+    'nt_venv': {
+        'stdlib': '{installed_base}/Lib',
+        'platstdlib': '{base}/Lib',
+        'purelib': '{base}/Lib/site-packages',
+        'platlib': '{base}/Lib/site-packages',
+        'include': '{installed_base}/Include',
+        'platinclude': '{installed_base}/Include',
+        'scripts': '{base}/Scripts',
+        'data': '{base}',
+        },
+    }
+
+# For the OS-native venv scheme, we essentially provide an alias:
+if os.name == 'nt':
+    _INSTALL_SCHEMES['venv'] = _INSTALL_SCHEMES['nt_venv']
+else:
+    _INSTALL_SCHEMES['venv'] = _INSTALL_SCHEMES['posix_venv']
+
+def _get_implementation():
+    return 'Python'
+
+# NOTE: site.py has copy of this function.
+# Sync it when modify this function.
+def _getuserbase():
+    env_base = os.environ.get("PYTHONUSERBASE", None)
+    if env_base:
+        return env_base
+
+    # Emscripten, iOS, tvOS, VxWorks, WASI, and watchOS have no home directories.
+    # Use _PYTHON_HOST_PLATFORM to get the correct platform when cross-compiling.
+    system_name = os.environ.get('_PYTHON_HOST_PLATFORM', sys.platform).split('-')[0]
+    if system_name in {"emscripten", "ios", "tvos", "vxworks", "wasi", "watchos"}:
+        return None
+
+    def joinuser(*args):
+        return os.path.expanduser(os.path.join(*args))
+
+    if os.name == "nt":
+        base = os.environ.get("APPDATA") or "~"
+        return joinuser(base,  _get_implementation())
+
+    if sys.platform == "darwin" and sys._framework:
+        return joinuser("~", "Library", sys._framework,
+                        f"{sys.version_info[0]}.{sys.version_info[1]}")
+
+    return joinuser("~", ".local")
+
+_HAS_USER_BASE = (_getuserbase() is not None)
+
+if _HAS_USER_BASE:
+    _INSTALL_SCHEMES |= {
+        # NOTE: When modifying "purelib" scheme, update site._get_path() too.
+        'nt_user': {
+            'stdlib': '{userbase}/{implementation}{py_version_nodot_plat}',
+            'platstdlib': '{userbase}/{implementation}{py_version_nodot_plat}',
+            'purelib': '{userbase}/{implementation}{py_version_nodot_plat}/site-packages',
+            'platlib': '{userbase}/{implementation}{py_version_nodot_plat}/site-packages',
+            'include': '{userbase}/{implementation}{py_version_nodot_plat}/Include',
+            'scripts': '{userbase}/{implementation}{py_version_nodot_plat}/Scripts',
+            'data': '{userbase}',
+            },
+        'posix_user': {
+            'stdlib': '{userbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+            'platstdlib': '{userbase}/{platlibdir}/{implementation_lower}{py_version_short}{abi_thread}',
+            'purelib': '{userbase}/lib/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+            'platlib': '{userbase}/lib/{implementation_lower}{py_version_short}{abi_thread}/site-packages',
+            'include': '{userbase}/include/{implementation_lower}{py_version_short}{abi_thread}',
+            'scripts': '{userbase}/bin',
+            'data': '{userbase}',
+            },
+        'osx_framework_user': {
+            'stdlib': '{userbase}/lib/{implementation_lower}',
+            'platstdlib': '{userbase}/lib/{implementation_lower}',
+            'purelib': '{userbase}/lib/{implementation_lower}/site-packages',
+            'platlib': '{userbase}/lib/{implementation_lower}/site-packages',
+            'include': '{userbase}/include/{implementation_lower}{py_version_short}',
+            'scripts': '{userbase}/bin',
+            'data': '{userbase}',
+            },
+    }
+
+_SCHEME_KEYS = ('stdlib', 'platstdlib', 'purelib', 'platlib', 'include',
+                'scripts', 'data')
+
+_PY_VERSION = sys.version.split()[0]
+_PY_VERSION_SHORT = f'{sys.version_info[0]}.{sys.version_info[1]}'
+_PY_VERSION_SHORT_NO_DOT = f'{sys.version_info[0]}{sys.version_info[1]}'
+_PREFIX = os.path.normpath(sys.prefix)
+_BASE_PREFIX = os.path.normpath(sys.base_prefix)
+_BASE_EXEC_PREFIX = os.path.normpath(sys.base_exec_prefix)
+# Mutex guarding initialization of _CONFIG_VARS.
+_CONFIG_VARS_LOCK = threading.RLock()
+_CONFIG_VARS = None
+# True iff _CONFIG_VARS has been fully initialized.
+_CONFIG_VARS_INITIALIZED = False
+_USER_BASE = None
+
+
+def _safe_realpath(path):
+    try:
+        return realpath(path)
+    except OSError:
+        return path
+
+if sys.executable:
+    _PROJECT_BASE = os.path.dirname(_safe_realpath(sys.executable))
+else:
+    # sys.executable can be empty if argv[0] has been changed and Python is
+    # unable to retrieve the real program name
+    _PROJECT_BASE = _safe_realpath(os.getcwd())
+
+# In a virtual environment, `sys._home` gives us the target directory
+# `_PROJECT_BASE` for the executable that created it when the virtual
+# python is an actual executable ('venv --copies' or Windows).
+_sys_home = getattr(sys, '_home', None)
+if _sys_home:
+    _PROJECT_BASE = _sys_home
+
+if os.name == 'nt':
+    # In a source build, the executable is in a subdirectory of the root
+    # that we want (<root>\PCbuild\<platname>).
+    # `_BASE_PREFIX` is used as the base installation is where the source
+    # will be.  The realpath is needed to prevent mount point confusion
+    # that can occur with just string comparisons.
+    if _safe_realpath(_PROJECT_BASE).startswith(
+            _safe_realpath(f'{_BASE_PREFIX}\\PCbuild')):
+        _PROJECT_BASE = _BASE_PREFIX
+
+# set for cross builds
+if "_PYTHON_PROJECT_BASE" in os.environ:
+    _PROJECT_BASE = _safe_realpath(os.environ["_PYTHON_PROJECT_BASE"])
+
+def is_python_build(check_home=None):
+    if check_home is not None:
+        import warnings
+        warnings.warn(
+            (
+                'The check_home argument of sysconfig.is_python_build is '
+                'deprecated and its value is ignored. '
+                'It will be removed in Python 3.15.'
+            ),
+            DeprecationWarning,
+            stacklevel=2,
+        )
+    for fn in ("Setup", "Setup.local"):
+        if os.path.isfile(os.path.join(_PROJECT_BASE, "Modules", fn)):
+            return True
+    return False
+
+_PYTHON_BUILD = is_python_build()
+
+if _PYTHON_BUILD:
+    for scheme in ('posix_prefix', 'posix_home'):
+        # On POSIX-y platforms, Python will:
+        # - Build from .h files in 'headers' (which is only added to the
+        #   scheme when building CPython)
+        # - Install .h files to 'include'
+        scheme = _INSTALL_SCHEMES[scheme]
+        scheme['headers'] = scheme['include']
+        scheme['include'] = '{srcdir}/Include'
+        scheme['platinclude'] = '{projectbase}/.'
+    del scheme
+
+
+def _subst_vars(s, local_vars):
+    try:
+        return s.format(**local_vars)
+    except KeyError as var:
+        try:
+            return s.format(**os.environ)
+        except KeyError:
+            raise AttributeError(f'{var}') from None
+
+def _extend_dict(target_dict, other_dict):
+    target_keys = target_dict.keys()
+    for key, value in other_dict.items():
+        if key in target_keys:
+            continue
+        target_dict[key] = value
+
+
+def _expand_vars(scheme, vars):
+    res = {}
+    if vars is None:
+        vars = {}
+    _extend_dict(vars, get_config_vars())
+    if os.name == 'nt':
+        # On Windows we want to substitute 'lib' for schemes rather
+        # than the native value (without modifying vars, in case it
+        # was passed in)
+        vars = vars | {'platlibdir': 'lib'}
+
+    for key, value in _INSTALL_SCHEMES[scheme].items():
+        if os.name in ('posix', 'nt'):
+            value = os.path.expanduser(value)
+        res[key] = os.path.normpath(_subst_vars(value, vars))
+    return res
+
+
+def _get_preferred_schemes():
+    if os.name == 'nt':
+        return {
+            'prefix': 'nt',
+            'home': 'posix_home',
+            'user': 'nt_user',
+        }
+    if sys.platform == 'darwin' and sys._framework:
+        return {
+            'prefix': 'posix_prefix',
+            'home': 'posix_home',
+            'user': 'osx_framework_user',
+        }
+
+    return {
+        'prefix': 'posix_prefix',
+        'home': 'posix_home',
+        'user': 'posix_user',
+    }
+
+
+def get_preferred_scheme(key):
+    if key == 'prefix' and sys.prefix != sys.base_prefix:
+        return 'venv'
+    scheme = _get_preferred_schemes()[key]
+    if scheme not in _INSTALL_SCHEMES:
+        raise ValueError(
+            f"{key!r} returned {scheme!r}, which is not a valid scheme "
+            f"on this platform"
+        )
+    return scheme
+
+
+def get_default_scheme():
+    return get_preferred_scheme('prefix')
+
+
+def get_makefile_filename():
+    """Return the path of the Makefile."""
+
+    # GH-127429: When cross-compiling, use the Makefile from the target, instead of the host Python.
+    if cross_base := os.environ.get('_PYTHON_PROJECT_BASE'):
+        return os.path.join(cross_base, 'Makefile')
+
+    if _PYTHON_BUILD:
+        return os.path.join(_PROJECT_BASE, "Makefile")
+
+    if hasattr(sys, 'abiflags'):
+        config_dir_name = f'config-{_PY_VERSION_SHORT}{sys.abiflags}'
+    else:
+        config_dir_name = 'config'
+
+    if hasattr(sys.implementation, '_multiarch'):
+        config_dir_name += f'-{sys.implementation._multiarch}'
+
+    return os.path.join(get_path('stdlib'), config_dir_name, 'Makefile')
+
+
+def _import_from_directory(path, name):
+    if name not in sys.modules:
+        import importlib.machinery
+        import importlib.util
+
+        spec = importlib.machinery.PathFinder.find_spec(name, [path])
+        module = importlib.util.module_from_spec(spec)
+        spec.loader.exec_module(module)
+        sys.modules[name] = module
+    return sys.modules[name]
+
+
+def _get_sysconfigdata_name():
+    multiarch = getattr(sys.implementation, '_multiarch', '')
+    return os.environ.get(
+        '_PYTHON_SYSCONFIGDATA_NAME',
+        f'_sysconfigdata_{sys.abiflags}_{sys.platform}_{multiarch}',
+    )
+
+
+def _get_sysconfigdata():
+    import importlib
+
+    name = _get_sysconfigdata_name()
+    path = os.environ.get('_PYTHON_SYSCONFIGDATA_PATH')
+    module = _import_from_directory(path, name) if path else importlib.import_module(name)
+
+    return module.build_time_vars
+
+
+def _installation_is_relocated():
+    """Is the Python installation running from a different prefix than what was targetted when building?"""
+    if os.name != 'posix':
+        raise NotImplementedError('sysconfig._installation_is_relocated() is currently only supported on POSIX')
+
+    data = _get_sysconfigdata()
+    return (
+        data['prefix'] != getattr(sys, 'base_prefix', '')
+        or data['exec_prefix'] != getattr(sys, 'base_exec_prefix', '')
+    )
+
+
+def _init_posix(vars):
+    """Initialize the module as appropriate for POSIX systems."""
+    # GH-126920: Make sure we don't overwrite any of the keys already set
+    vars.update(_get_sysconfigdata() | vars)
+
+
+def _init_non_posix(vars):
+    """Initialize the module as appropriate for NT"""
+    # set basic install directories
+    import _winapi
+    import _sysconfig
+    vars['LIBDEST'] = get_path('stdlib')
+    vars['BINLIBDEST'] = get_path('platstdlib')
+    vars['INCLUDEPY'] = get_path('include')
+
+    # Add EXT_SUFFIX, SOABI, Py_DEBUG, and Py_GIL_DISABLED
+    vars.update(_sysconfig.config_vars())
+
+    # NOTE: ABIFLAGS is only an emulated value. It is not present during build
+    #       on Windows. sys.abiflags is absent on Windows and vars['abiflags']
+    #       is already widely used to calculate paths, so it should remain an
+    #       empty string.
+    vars['ABIFLAGS'] = ''.join(
+        (
+            't' if vars['Py_GIL_DISABLED'] else '',
+            '_d' if vars['Py_DEBUG'] else '',
+        ),
+    )
+
+    vars['LIBDIR'] = _safe_realpath(os.path.join(get_config_var('installed_base'), 'libs'))
+    if hasattr(sys, 'dllhandle'):
+        dllhandle = _winapi.GetModuleFileName(sys.dllhandle)
+        vars['LIBRARY'] = os.path.basename(_safe_realpath(dllhandle))
+        vars['LDLIBRARY'] = vars['LIBRARY']
+    vars['EXE'] = '.exe'
+    vars['VERSION'] = _PY_VERSION_SHORT_NO_DOT
+    vars['BINDIR'] = os.path.dirname(_safe_realpath(sys.executable))
+    vars['TZPATH'] = ''
+
+#
+# public APIs
+#
+
+
+def parse_config_h(fp, vars=None):
+    """Parse a config.h-style file.
+
+    A dictionary containing name/value pairs is returned.  If an
+    optional dictionary is passed in as the second argument, it is
+    used instead of a new dictionary.
+    """
+    if vars is None:
+        vars = {}
+    import re
+    define_rx = re.compile("#define ([A-Z][A-Za-z0-9_]+) (.*)\n")
+    undef_rx = re.compile("/[*] #undef ([A-Z][A-Za-z0-9_]+) [*]/\n")
+
+    while True:
+        line = fp.readline()
+        if not line:
+            break
+        m = define_rx.match(line)
+        if m:
+            n, v = m.group(1, 2)
+            try:
+                if n in _ALWAYS_STR:
+                    raise ValueError
+                v = int(v)
+            except ValueError:
+                pass
+            vars[n] = v
+        else:
+            m = undef_rx.match(line)
+            if m:
+                vars[m.group(1)] = 0
+    return vars
+
+
+def get_config_h_filename():
+    """Return the path of pyconfig.h."""
+    if _PYTHON_BUILD:
+        if os.name == "nt":
+            inc_dir = os.path.join(_PROJECT_BASE, 'PC')
+        else:
+            inc_dir = _PROJECT_BASE
+    else:
+        inc_dir = get_path('platinclude')
+    return os.path.join(inc_dir, 'pyconfig.h')
+
+
+def get_scheme_names():
+    """Return a tuple containing the schemes names."""
+    return tuple(sorted(_INSTALL_SCHEMES))
+
+
+def get_path_names():
+    """Return a tuple containing the paths names."""
+    return _SCHEME_KEYS
+
+
+def get_paths(scheme=get_default_scheme(), vars=None, expand=True):
+    """Return a mapping containing an install scheme.
+
+    ``scheme`` is the install scheme name. If not provided, it will
+    return the default scheme for the current platform.
+    """
+    if expand:
+        return _expand_vars(scheme, vars)
+    else:
+        return _INSTALL_SCHEMES[scheme]
+
+
+def get_path(name, scheme=get_default_scheme(), vars=None, expand=True):
+    """Return a path corresponding to the scheme.
+
+    ``scheme`` is the install scheme name.
+    """
+    return get_paths(scheme, vars, expand)[name]
+
+
+def _init_config_vars():
+    global _CONFIG_VARS
+    _CONFIG_VARS = {}
+
+    prefix = os.path.normpath(sys.prefix)
+    exec_prefix = os.path.normpath(sys.exec_prefix)
+    base_prefix = _BASE_PREFIX
+    base_exec_prefix = _BASE_EXEC_PREFIX
+
+    try:
+        abiflags = sys.abiflags
+    except AttributeError:
+        abiflags = ''
+
+    if os.name == 'posix':
+        _init_posix(_CONFIG_VARS)
+        # If we are cross-compiling, load the prefixes from the Makefile instead.
+        if '_PYTHON_PROJECT_BASE' in os.environ:
+            prefix = _CONFIG_VARS['host_prefix']
+            exec_prefix = _CONFIG_VARS['host_exec_prefix']
+            base_prefix = _CONFIG_VARS['host_prefix']
+            base_exec_prefix = _CONFIG_VARS['host_exec_prefix']
+            abiflags = _CONFIG_VARS['ABIFLAGS']
+
+    # Normalized versions of prefix and exec_prefix are handy to have;
+    # in fact, these are the standard versions used most places in the
+    # Distutils.
+    _CONFIG_VARS['prefix'] = prefix
+    _CONFIG_VARS['exec_prefix'] = exec_prefix
+    _CONFIG_VARS['py_version'] = _PY_VERSION
+    _CONFIG_VARS['py_version_short'] = _PY_VERSION_SHORT
+    _CONFIG_VARS['py_version_nodot'] = _PY_VERSION_SHORT_NO_DOT
+    _CONFIG_VARS['installed_base'] = base_prefix
+    _CONFIG_VARS['base'] = prefix
+    _CONFIG_VARS['installed_platbase'] = base_exec_prefix
+    _CONFIG_VARS['platbase'] = exec_prefix
+    _CONFIG_VARS['projectbase'] = _PROJECT_BASE
+    _CONFIG_VARS['platlibdir'] = sys.platlibdir
+    _CONFIG_VARS['implementation'] = _get_implementation()
+    _CONFIG_VARS['implementation_lower'] = _get_implementation().lower()
+    _CONFIG_VARS['abiflags'] = abiflags
+    try:
+        _CONFIG_VARS['py_version_nodot_plat'] = sys.winver.replace('.', '')
+    except AttributeError:
+        _CONFIG_VARS['py_version_nodot_plat'] = ''
+
+    if os.name == 'nt':
+        _init_non_posix(_CONFIG_VARS)
+        _CONFIG_VARS['VPATH'] = sys._vpath
+        _CONFIG_VARS['TZPATH'] = os.path.join(_PREFIX, "share", "zoneinfo")
+    if _HAS_USER_BASE:
+        # Setting 'userbase' is done below the call to the
+        # init function to enable using 'get_config_var' in
+        # the init-function.
+        _CONFIG_VARS['userbase'] = _getuserbase()
+
+    # e.g., 't' for free-threaded or '' for default build
+    _CONFIG_VARS['abi_thread'] = 't' if _CONFIG_VARS.get('Py_GIL_DISABLED') else ''
+
+    # Always convert srcdir to an absolute path
+    srcdir = _CONFIG_VARS.get('srcdir', _PROJECT_BASE)
+    if os.name == 'posix':
+        if _PYTHON_BUILD:
+            # If srcdir is a relative path (typically '.' or '..')
+            # then it should be interpreted relative to the directory
+            # containing Makefile.
+            base = os.path.dirname(get_makefile_filename())
+            srcdir = os.path.join(base, srcdir)
+        else:
+            # srcdir is not meaningful since the installation is
+            # spread about the filesystem.  We choose the
+            # directory containing the Makefile since we know it
+            # exists.
+            srcdir = os.path.dirname(get_makefile_filename())
+    _CONFIG_VARS['srcdir'] = _safe_realpath(srcdir)
+
+    # OS X platforms require special customization to handle
+    # multi-architecture, multi-os-version installers
+    if sys.platform == 'darwin':
+        import _osx_support
+        _osx_support.customize_config_vars(_CONFIG_VARS)
+
+    global _CONFIG_VARS_INITIALIZED
+    _CONFIG_VARS_INITIALIZED = True
+
+
+def get_config_vars(*args):
+    """With no arguments, return a dictionary of all configuration
+    variables relevant for the current platform.
+
+    On Unix, this means every variable defined in Python's installed Makefile;
+    On Windows it's a much smaller set.
+
+    With arguments, return a list of values that result from looking up
+    each argument in the configuration variable dictionary.
+    """
+    global _CONFIG_VARS_INITIALIZED
+
+    # Avoid claiming the lock once initialization is complete.
+    if _CONFIG_VARS_INITIALIZED:
+        # GH-126789: If sys.prefix or sys.exec_prefix were updated, invalidate the cache.
+        prefix = os.path.normpath(sys.prefix)
+        exec_prefix = os.path.normpath(sys.exec_prefix)
+        if _CONFIG_VARS['prefix'] != prefix or _CONFIG_VARS['exec_prefix'] != exec_prefix:
+            with _CONFIG_VARS_LOCK:
+                _CONFIG_VARS_INITIALIZED = False
+                _init_config_vars()
+    else:
+        # Initialize the config_vars cache.
+        with _CONFIG_VARS_LOCK:
+            # Test again with the lock held to avoid races. Note that
+            # we test _CONFIG_VARS here, not _CONFIG_VARS_INITIALIZED,
+            # to ensure that recursive calls to get_config_vars()
+            # don't re-enter init_config_vars().
+            if _CONFIG_VARS is None:
+                _init_config_vars()
+
+    if args:
+        vals = []
+        for name in args:
+            vals.append(_CONFIG_VARS.get(name))
+        return vals
+    else:
+        return _CONFIG_VARS
+
+
+def get_config_var(name):
+    """Return the value of a single variable using the dictionary returned by
+    'get_config_vars()'.
+
+    Equivalent to get_config_vars().get(name)
+    """
+    return get_config_vars().get(name)
+
+
+def get_platform():
+    """Return a string that identifies the current platform.
+
+    This is used mainly to distinguish platform-specific build directories and
+    platform-specific built distributions.  Typically includes the OS name and
+    version and the architecture (as supplied by 'os.uname()'), although the
+    exact information included depends on the OS; on Linux, the kernel version
+    isn't particularly important.
+
+    Examples of returned values:
+
+
+    Windows:
+
+    - win-amd64 (64-bit Windows on AMD64, aka x86_64, Intel64, and EM64T)
+    - win-arm64 (64-bit Windows on ARM64, aka AArch64)
+    - win32 (all others - specifically, sys.platform is returned)
+
+    POSIX based OS:
+
+    - linux-x86_64
+    - macosx-15.5-arm64
+    - macosx-26.0-universal2 (macOS on Apple Silicon or Intel)
+    - android-24-arm64_v8a
+
+    For other non-POSIX platforms, currently just returns :data:`sys.platform`."""
+    if os.name == 'nt':
+        if 'amd64' in sys.version.lower():
+            return 'win-amd64'
+        if '(arm)' in sys.version.lower():
+            return 'win-arm32'
+        if '(arm64)' in sys.version.lower():
+            return 'win-arm64'
+        return sys.platform
+
+    if os.name != "posix" or not hasattr(os, 'uname'):
+        # XXX what about the architecture? NT is Intel or Alpha
+        return sys.platform
+
+    # Set for cross builds explicitly
+    if "_PYTHON_HOST_PLATFORM" in os.environ:
+        osname, _, machine = os.environ["_PYTHON_HOST_PLATFORM"].partition('-')
+        release = None
+    else:
+        # Try to distinguish various flavours of Unix
+        osname, host, release, version, machine = os.uname()
+
+        # Convert the OS name to lowercase, remove '/' characters, and translate
+        # spaces (for "Power Macintosh")
+        osname = osname.lower().replace('/', '')
+        machine = machine.replace(' ', '_')
+        machine = machine.replace('/', '-')
+
+    if osname == "android" or sys.platform == "android":
+        osname = "android"
+        release = get_config_var("ANDROID_API_LEVEL")
+
+        # Wheel tags use the ABI names from Android's own tools.
+        # When Python is running on 32-bit ARM Android on a 64-bit ARM kernel,
+        # 'os.uname().machine' is 'armv8l'. Such devices run the same userspace
+        # code as 'armv7l' devices.
+        # During the build process of the Android testbed when targeting 32-bit ARM,
+        # '_PYTHON_HOST_PLATFORM' is 'arm-linux-androideabi', so 'machine' becomes
+        # 'arm'.
+        machine = {
+            "aarch64": "arm64_v8a",
+            "arm": "armeabi_v7a",
+            "armv7l": "armeabi_v7a",
+            "armv8l": "armeabi_v7a",
+            "i686": "x86",
+            "x86_64": "x86_64",
+        }[machine]
+    elif osname == "linux":
+        # At least on Linux/Intel, 'machine' is the processor --
+        # i386, etc.
+        # XXX what about Alpha, SPARC, etc?
+        return  f"{osname}-{machine}"
+    elif osname[:5] == "sunos":
+        if release[0] >= "5":           # SunOS 5 == Solaris 2
+            osname = "solaris"
+            release = f"{int(release[0]) - 3}.{release[2:]}"
+            # We can't use "platform.architecture()[0]" because a
+            # bootstrap problem. We use a dict to get an error
+            # if some suspicious happens.
+            bitness = {2147483647:"32bit", 9223372036854775807:"64bit"}
+            machine += f".{bitness[sys.maxsize]}"
+        # fall through to standard osname-release-machine representation
+    elif osname[:3] == "aix":
+        from _aix_support import aix_platform
+        return aix_platform()
+    elif osname[:6] == "cygwin":
+        osname = "cygwin"
+        import re
+        rel_re = re.compile(r'[\d.]+')
+        m = rel_re.match(release)
+        if m:
+            release = m.group()
+    elif osname[:6] == "darwin":
+        if sys.platform == "ios":
+            release = get_config_vars().get("IPHONEOS_DEPLOYMENT_TARGET", "13.0")
+            osname = sys.platform
+            machine = sys.implementation._multiarch
+        else:
+            import _osx_support
+            osname, release, machine = _osx_support.get_platform_osx(
+                                                get_config_vars(),
+                                                osname, release, machine)
+
+    return '-'.join(map(str, filter(None, (osname, release, machine))))
+
+
+def get_python_version():
+    return _PY_VERSION_SHORT
+
+
+def _get_python_version_abi():
+    return _PY_VERSION_SHORT + get_config_var("abi_thread")
+
+
+def expand_makefile_vars(s, vars):
+    """Expand Makefile-style variables -- "${foo}" or "$(foo)" -- in
+    'string' according to 'vars' (a dictionary mapping variable names to
+    values).  Variables not present in 'vars' are silently expanded to the
+    empty string.  The variable values in 'vars' should not contain further
+    variable expansions; if 'vars' is the output of 'parse_makefile()',
+    you're fine.  Returns a variable-expanded version of 's'.
+    """
+
+    import warnings
+    warnings.warn(
+        'sysconfig.expand_makefile_vars is deprecated and will be removed in '
+        'Python 3.16. Use sysconfig.get_paths(vars=...) instead.',
+        DeprecationWarning,
+        stacklevel=2,
+    )
+
+    import re
+
+    _findvar1_rx = r"\$\(([A-Za-z][A-Za-z0-9_]*)\)"
+    _findvar2_rx = r"\${([A-Za-z][A-Za-z0-9_]*)}"
+
+    # This algorithm does multiple expansion, so if vars['foo'] contains
+    # "${bar}", it will expand ${foo} to ${bar}, and then expand
+    # ${bar}... and so forth.  This is fine as long as 'vars' comes from
+    # 'parse_makefile()', which takes care of such expansions eagerly,
+    # according to make's variable expansion semantics.
+
+    while True:
+        m = re.search(_findvar1_rx, s) or re.search(_findvar2_rx, s)
+        if m:
+            (beg, end) = m.span()
+            s = s[0:beg] + vars.get(m.group(1)) + s[end:]
+        else:
+            break
+    return s
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..bc2197cfe794028ac6eeb09e5754ad7cc290d578
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/sysconfig/__main__.py
@@ -0,0 +1,276 @@
+import json
+import os
+import sys
+import types
+from sysconfig import (
+    _ALWAYS_STR,
+    _PYTHON_BUILD,
+    _get_sysconfigdata_name,
+    get_config_h_filename,
+    get_config_var,
+    get_config_vars,
+    get_default_scheme,
+    get_makefile_filename,
+    get_paths,
+    get_platform,
+    get_python_version,
+    parse_config_h,
+)
+
+
+# Regexes needed for parsing Makefile (and similar syntaxes,
+# like old-style Setup files).
+_variable_rx = r"([a-zA-Z][a-zA-Z0-9_]+)\s*=\s*(.*)"
+_findvar1_rx = r"\$\(([A-Za-z][A-Za-z0-9_]*)\)"
+_findvar2_rx = r"\${([A-Za-z][A-Za-z0-9_]*)}"
+
+
+def _parse_makefile(filename, vars=None, keep_unresolved=True):
+    """Parse a Makefile-style file.
+
+    A dictionary containing name/value pairs is returned.  If an
+    optional dictionary is passed in as the second argument, it is
+    used instead of a new dictionary.
+    """
+    import re
+
+    if vars is None:
+        vars = {}
+    done = {}
+    notdone = {}
+
+    with open(filename, encoding=sys.getfilesystemencoding(),
+              errors="surrogateescape") as f:
+        lines = f.readlines()
+
+    for line in lines:
+        if line.startswith('#') or line.strip() == '':
+            continue
+        m = re.match(_variable_rx, line)
+        if m:
+            n, v = m.group(1, 2)
+            v = v.strip()
+            # `$$' is a literal `$' in make
+            tmpv = v.replace('$$', '')
+
+            if "$" in tmpv:
+                notdone[n] = v
+            else:
+                try:
+                    if n in _ALWAYS_STR:
+                        raise ValueError
+
+                    v = int(v)
+                except ValueError:
+                    # insert literal `$'
+                    done[n] = v.replace('$$', '$')
+                else:
+                    done[n] = v
+
+    # do variable interpolation here
+    variables = list(notdone.keys())
+
+    # Variables with a 'PY_' prefix in the makefile. These need to
+    # be made available without that prefix through sysconfig.
+    # Special care is needed to ensure that variable expansion works, even
+    # if the expansion uses the name without a prefix.
+    renamed_variables = ('CFLAGS', 'LDFLAGS', 'CPPFLAGS')
+
+    while len(variables) > 0:
+        for name in tuple(variables):
+            value = notdone[name]
+            m1 = re.search(_findvar1_rx, value)
+            m2 = re.search(_findvar2_rx, value)
+            if m1 and m2:
+                m = m1 if m1.start() < m2.start() else m2
+            else:
+                m = m1 if m1 else m2
+            if m is not None:
+                n = m.group(1)
+                found = True
+                if n in done:
+                    item = str(done[n])
+                elif n in notdone:
+                    # get it on a subsequent round
+                    found = False
+                elif n in os.environ:
+                    # do it like make: fall back to environment
+                    item = os.environ[n]
+
+                elif n in renamed_variables:
+                    if (name.startswith('PY_') and
+                        name[3:] in renamed_variables):
+                        item = ""
+
+                    elif 'PY_' + n in notdone:
+                        found = False
+
+                    else:
+                        item = str(done['PY_' + n])
+
+                else:
+                    done[n] = item = ""
+
+                if found:
+                    after = value[m.end():]
+                    value = value[:m.start()] + item + after
+                    if "$" in after:
+                        notdone[name] = value
+                    else:
+                        try:
+                            if name in _ALWAYS_STR:
+                                raise ValueError
+                            value = int(value)
+                        except ValueError:
+                            done[name] = value.strip()
+                        else:
+                            done[name] = value
+                        variables.remove(name)
+
+                        if name.startswith('PY_') \
+                        and name[3:] in renamed_variables:
+
+                            name = name[3:]
+                            if name not in done:
+                                done[name] = value
+
+            else:
+                # Adds unresolved variables to the done dict.
+                # This is disabled when called from distutils.sysconfig
+                if keep_unresolved:
+                    done[name] = value
+                # bogus variable reference (e.g. "prefix=$/opt/python");
+                # just drop it since we can't deal
+                variables.remove(name)
+
+    # strip spurious spaces
+    for k, v in done.items():
+        if isinstance(v, str):
+            done[k] = v.strip()
+
+    # save the results in the global dictionary
+    vars.update(done)
+    return vars
+
+
+def _print_config_dict(d, stream):
+    print ("{", file=stream)
+    for k, v in sorted(d.items()):
+        print(f"    {k!r}: {v!r},", file=stream)
+    print ("}", file=stream)
+
+
+def _get_pybuilddir():
+    pybuilddir = f'build/lib.{get_platform()}-{get_python_version()}'
+    if get_config_var('Py_DEBUG') == '1':
+        pybuilddir += '-pydebug'
+    return pybuilddir
+
+
+def _get_json_data_name():
+    name = _get_sysconfigdata_name()
+    assert name.startswith('_sysconfigdata')
+    return name.replace('_sysconfigdata', '_sysconfig_vars') + '.json'
+
+
+def _generate_posix_vars():
+    """Generate the Python module containing build-time variables."""
+    vars = {}
+    # load the installed Makefile:
+    makefile = get_makefile_filename()
+    try:
+        _parse_makefile(makefile, vars)
+    except OSError as e:
+        msg = f"invalid Python installation: unable to open {makefile}"
+        if hasattr(e, "strerror"):
+            msg = f"{msg} ({e.strerror})"
+        raise OSError(msg)
+    # load the installed pyconfig.h:
+    config_h = get_config_h_filename()
+    try:
+        with open(config_h, encoding="utf-8") as f:
+            parse_config_h(f, vars)
+    except OSError as e:
+        msg = f"invalid Python installation: unable to open {config_h}"
+        if hasattr(e, "strerror"):
+            msg = f"{msg} ({e.strerror})"
+        raise OSError(msg)
+    # On AIX, there are wrong paths to the linker scripts in the Makefile
+    # -- these paths are relative to the Python source, but when installed
+    # the scripts are in another directory.
+    if _PYTHON_BUILD:
+        vars['BLDSHARED'] = vars['LDSHARED']
+
+    name = _get_sysconfigdata_name()
+
+    # There's a chicken-and-egg situation on OS X with regards to the
+    # _sysconfigdata module after the changes introduced by #15298:
+    # get_config_vars() is called by get_platform() as part of the
+    # `make pybuilddir.txt` target -- which is a precursor to the
+    # _sysconfigdata.py module being constructed.  Unfortunately,
+    # get_config_vars() eventually calls _init_posix(), which attempts
+    # to import _sysconfigdata, which we won't have built yet.  In order
+    # for _init_posix() to work, if we're on Darwin, just mock up the
+    # _sysconfigdata module manually and populate it with the build vars.
+    # This is more than sufficient for ensuring the subsequent call to
+    # get_platform() succeeds.
+    # GH-127178: Since we started generating a .json file, we also need this to
+    #            be able to run sysconfig.get_config_vars().
+    module = types.ModuleType(name)
+    module.build_time_vars = vars
+    sys.modules[name] = module
+
+    pybuilddir = _get_pybuilddir()
+    os.makedirs(pybuilddir, exist_ok=True)
+    destfile = os.path.join(pybuilddir, name + '.py')
+
+    with open(destfile, 'w', encoding='utf8') as f:
+        f.write('# system configuration generated and used by'
+                ' the sysconfig module\n')
+        f.write('build_time_vars = ')
+        _print_config_dict(vars, stream=f)
+
+    print(f'Written {destfile}')
+
+    install_vars = get_config_vars()
+    # Fix config vars to match the values after install (of the default environment)
+    install_vars['projectbase'] = install_vars['BINDIR']
+    install_vars['srcdir'] = install_vars['LIBPL']
+    # Write a JSON file with the output of sysconfig.get_config_vars
+    jsonfile = os.path.join(pybuilddir, _get_json_data_name())
+    with open(jsonfile, 'w') as f:
+        json.dump(install_vars, f, indent=2)
+
+    print(f'Written {jsonfile}')
+
+    # Create file used for sys.path fixup -- see Modules/getpath.c
+    with open('pybuilddir.txt', 'w', encoding='utf8') as f:
+        f.write(pybuilddir)
+
+
+def _print_dict(title, data):
+    for index, (key, value) in enumerate(sorted(data.items())):
+        if index == 0:
+            print(f'{title}: ')
+        print(f'\t{key} = "{value}"')
+
+
+def _main():
+    """Display all information sysconfig detains."""
+    if '--generate-posix-vars' in sys.argv:
+        _generate_posix_vars()
+        return
+    print(f'Platform: "{get_platform()}"')
+    print(f'Python version: "{get_python_version()}"')
+    print(f'Current installation scheme: "{get_default_scheme()}"')
+    print()
+    _print_dict('Paths', get_paths())
+    print()
+    _print_dict('Variables', get_config_vars())
+
+
+if __name__ == '__main__':
+    try:
+        _main()
+    except BrokenPipeError:
+        pass
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/test/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/test/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..b93054b3ecf3a5af96f4772e7208e7a18b5dd4a4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/test/__init__.py
@@ -0,0 +1 @@
+# Dummy file to make this directory a package.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..01ea2ab62cf41e0806f718c64bc0606b84004b73
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__init__.py
@@ -0,0 +1,5016 @@
+"""Wrapper functions for Tcl/Tk.
+
+Tkinter provides classes which allow the display, positioning and
+control of widgets. Toplevel widgets are Tk and Toplevel. Other
+widgets are Frame, Label, Entry, Text, Canvas, Button, Radiobutton,
+Checkbutton, Scale, Listbox, Scrollbar, OptionMenu, Spinbox
+LabelFrame and PanedWindow.
+
+Properties of the widgets are specified with keyword arguments.
+Keyword arguments have the same name as the corresponding options
+under Tk.
+
+Widgets are positioned with one of the geometry managers Place, Pack
+or Grid. These managers can be called with methods place, pack, grid
+available in every Widget.
+
+Actions are bound to events by options (e.g. the command
+keyword argument) or with the bind() method.
+
+Example (Hello, World):
+import tkinter
+from tkinter.constants import *
+tk = tkinter.Tk()
+frame = tkinter.Frame(tk, relief=RIDGE, borderwidth=2)
+frame.pack(fill=BOTH, expand=1)
+label = tkinter.Label(frame, text="Hello, World")
+label.pack(fill=X, expand=1)
+button = tkinter.Button(frame, text="Exit", command=tk.destroy)
+button.pack(side=BOTTOM)
+tk.mainloop()
+"""
+
+import collections
+import enum
+import sys
+import types
+
+import _tkinter # If this fails your Python may not be configured for Tk
+TclError = _tkinter.TclError
+from tkinter.constants import *
+import re
+
+wantobjects = 1
+_debug = False  # set to True to print executed Tcl/Tk commands
+
+TkVersion = float(_tkinter.TK_VERSION)
+TclVersion = float(_tkinter.TCL_VERSION)
+
+READABLE = _tkinter.READABLE
+WRITABLE = _tkinter.WRITABLE
+EXCEPTION = _tkinter.EXCEPTION
+
+
+_magic_re = re.compile(r'([\\{}])')
+_space_re = re.compile(r'([\s])', re.ASCII)
+
+
+def _join(value):
+    """Internal function."""
+    return ' '.join(map(_stringify, value))
+
+
+def _stringify(value):
+    """Internal function."""
+    if isinstance(value, (list, tuple)):
+        if len(value) == 1:
+            value = _stringify(value[0])
+            if _magic_re.search(value):
+                value = '{%s}' % value
+        else:
+            value = '{%s}' % _join(value)
+    else:
+        if isinstance(value, bytes):
+            value = str(value, 'latin1')
+        else:
+            value = str(value)
+        if not value:
+            value = '{}'
+        elif _magic_re.search(value):
+            # add '\' before special characters and spaces
+            value = _magic_re.sub(r'\\\1', value)
+            value = value.replace('\n', r'\n')
+            value = _space_re.sub(r'\\\1', value)
+            if value[0] == '"':
+                value = '\\' + value
+        elif value[0] == '"' or _space_re.search(value):
+            value = '{%s}' % value
+    return value
+
+
+def _flatten(seq):
+    """Internal function."""
+    res = ()
+    for item in seq:
+        if isinstance(item, (tuple, list)):
+            res = res + _flatten(item)
+        elif item is not None:
+            res = res + (item,)
+    return res
+
+
+try: _flatten = _tkinter._flatten
+except AttributeError: pass
+
+
+def _cnfmerge(cnfs):
+    """Internal function."""
+    if isinstance(cnfs, dict):
+        return cnfs
+    elif isinstance(cnfs, (type(None), str)):
+        return cnfs
+    else:
+        cnf = {}
+        for c in _flatten(cnfs):
+            try:
+                cnf.update(c)
+            except (AttributeError, TypeError) as msg:
+                print("_cnfmerge: fallback due to:", msg)
+                for k, v in c.items():
+                    cnf[k] = v
+        return cnf
+
+
+try: _cnfmerge = _tkinter._cnfmerge
+except AttributeError: pass
+
+
+def _splitdict(tk, v, cut_minus=True, conv=None):
+    """Return a properly formatted dict built from Tcl list pairs.
+
+    If cut_minus is True, the supposed '-' prefix will be removed from
+    keys. If conv is specified, it is used to convert values.
+
+    Tcl list is expected to contain an even number of elements.
+    """
+    t = tk.splitlist(v)
+    if len(t) % 2:
+        raise RuntimeError('Tcl list representing a dict is expected '
+                           'to contain an even number of elements')
+    it = iter(t)
+    dict = {}
+    for key, value in zip(it, it):
+        key = str(key)
+        if cut_minus and key[0] == '-':
+            key = key[1:]
+        if conv:
+            value = conv(value)
+        dict[key] = value
+    return dict
+
+class _VersionInfoType(collections.namedtuple('_VersionInfoType',
+        ('major', 'minor', 'micro', 'releaselevel', 'serial'))):
+    def __str__(self):
+        if self.releaselevel == 'final':
+            return f'{self.major}.{self.minor}.{self.micro}'
+        else:
+            return f'{self.major}.{self.minor}{self.releaselevel[0]}{self.serial}'
+
+def _parse_version(version):
+    import re
+    m = re.fullmatch(r'(\d+)\.(\d+)([ab.])(\d+)', version)
+    major, minor, releaselevel, serial = m.groups()
+    major, minor, serial = int(major), int(minor), int(serial)
+    if releaselevel == '.':
+        micro = serial
+        serial = 0
+        releaselevel = 'final'
+    else:
+        micro = 0
+        releaselevel = {'a': 'alpha', 'b': 'beta'}[releaselevel]
+    return _VersionInfoType(major, minor, micro, releaselevel, serial)
+
+
+@enum._simple_enum(enum.StrEnum)
+class EventType:
+    KeyPress = '2'
+    Key = KeyPress
+    KeyRelease = '3'
+    ButtonPress = '4'
+    Button = ButtonPress
+    ButtonRelease = '5'
+    Motion = '6'
+    Enter = '7'
+    Leave = '8'
+    FocusIn = '9'
+    FocusOut = '10'
+    Keymap = '11'           # undocumented
+    Expose = '12'
+    GraphicsExpose = '13'   # undocumented
+    NoExpose = '14'         # undocumented
+    Visibility = '15'
+    Create = '16'
+    Destroy = '17'
+    Unmap = '18'
+    Map = '19'
+    MapRequest = '20'
+    Reparent = '21'
+    Configure = '22'
+    ConfigureRequest = '23'
+    Gravity = '24'
+    ResizeRequest = '25'
+    Circulate = '26'
+    CirculateRequest = '27'
+    Property = '28'
+    SelectionClear = '29'   # undocumented
+    SelectionRequest = '30' # undocumented
+    Selection = '31'        # undocumented
+    Colormap = '32'
+    ClientMessage = '33'    # undocumented
+    Mapping = '34'          # undocumented
+    VirtualEvent = '35'     # undocumented
+    Activate = '36'
+    Deactivate = '37'
+    MouseWheel = '38'
+
+
+class Event:
+    """Container for the properties of an event.
+
+    Instances of this type are generated if one of the following events occurs:
+
+    KeyPress, KeyRelease - for keyboard events
+    ButtonPress, ButtonRelease, Motion, Enter, Leave, MouseWheel - for mouse events
+    Visibility, Unmap, Map, Expose, FocusIn, FocusOut, Circulate,
+    Colormap, Gravity, Reparent, Property, Destroy, Activate,
+    Deactivate - for window events.
+
+    If a callback function for one of these events is registered
+    using bind, bind_all, bind_class, or tag_bind, the callback is
+    called with an Event as first argument. It will have the
+    following attributes (in braces are the event types for which
+    the attribute is valid):
+
+        serial - serial number of event
+    num - mouse button pressed (ButtonPress, ButtonRelease)
+    focus - whether the window has the focus (Enter, Leave)
+    height - height of the exposed window (Configure, Expose)
+    width - width of the exposed window (Configure, Expose)
+    keycode - keycode of the pressed key (KeyPress, KeyRelease)
+    state - state of the event as a number (ButtonPress, ButtonRelease,
+                            Enter, KeyPress, KeyRelease,
+                            Leave, Motion)
+    state - state as a string (Visibility)
+    time - when the event occurred
+    x - x-position of the mouse
+    y - y-position of the mouse
+    x_root - x-position of the mouse on the screen
+             (ButtonPress, ButtonRelease, KeyPress, KeyRelease, Motion)
+    y_root - y-position of the mouse on the screen
+             (ButtonPress, ButtonRelease, KeyPress, KeyRelease, Motion)
+    char - pressed character (KeyPress, KeyRelease)
+    send_event - see X/Windows documentation
+    keysym - keysym of the event as a string (KeyPress, KeyRelease)
+    keysym_num - keysym of the event as a number (KeyPress, KeyRelease)
+    type - type of the event as a number
+    widget - widget in which the event occurred
+    delta - delta of wheel movement (MouseWheel)
+    """
+
+    def __repr__(self):
+        attrs = {k: v for k, v in self.__dict__.items() if v != '??'}
+        if not self.char:
+            del attrs['char']
+        elif self.char != '??':
+            attrs['char'] = repr(self.char)
+        if not getattr(self, 'send_event', True):
+            del attrs['send_event']
+        if self.state == 0:
+            del attrs['state']
+        elif isinstance(self.state, int):
+            state = self.state
+            mods = ('Shift', 'Lock', 'Control',
+                    'Mod1', 'Mod2', 'Mod3', 'Mod4', 'Mod5',
+                    'Button1', 'Button2', 'Button3', 'Button4', 'Button5')
+            s = []
+            for i, n in enumerate(mods):
+                if state & (1 << i):
+                    s.append(n)
+            state = state & ~((1<< len(mods)) - 1)
+            if state or not s:
+                s.append(hex(state))
+            attrs['state'] = '|'.join(s)
+        if self.delta == 0:
+            del attrs['delta']
+        # widget usually is known
+        # serial and time are not very interesting
+        # keysym_num duplicates keysym
+        # x_root and y_root mostly duplicate x and y
+        keys = ('send_event',
+                'state', 'keysym', 'keycode', 'char',
+                'num', 'delta', 'focus',
+                'x', 'y', 'width', 'height')
+        return '<%s event%s>' % (
+            getattr(self.type, 'name', self.type),
+            ''.join(' %s=%s' % (k, attrs[k]) for k in keys if k in attrs)
+        )
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+_support_default_root = True
+_default_root = None
+
+
+def NoDefaultRoot():
+    """Inhibit setting of default root window.
+
+    Call this function to inhibit that the first instance of
+    Tk is used for windows without an explicit parent window.
+    """
+    global _support_default_root, _default_root
+    _support_default_root = False
+    # Delete, so any use of _default_root will immediately raise an exception.
+    # Rebind before deletion, so repeated calls will not fail.
+    _default_root = None
+    del _default_root
+
+
+def _get_default_root(what=None):
+    if not _support_default_root:
+        raise RuntimeError("No master specified and tkinter is "
+                           "configured to not support default root")
+    if _default_root is None:
+        if what:
+            raise RuntimeError(f"Too early to {what}: no default root window")
+        root = Tk()
+        assert _default_root is root
+    return _default_root
+
+
+def _get_temp_root():
+    global _support_default_root
+    if not _support_default_root:
+        raise RuntimeError("No master specified and tkinter is "
+                           "configured to not support default root")
+    root = _default_root
+    if root is None:
+        assert _support_default_root
+        _support_default_root = False
+        root = Tk()
+        _support_default_root = True
+        assert _default_root is None
+        root.withdraw()
+        root._temporary = True
+    return root
+
+
+def _destroy_temp_root(master):
+    if getattr(master, '_temporary', False):
+        try:
+            master.destroy()
+        except TclError:
+            pass
+
+
+def _tkerror(err):
+    """Internal function."""
+    pass
+
+
+def _exit(code=0):
+    """Internal function. Calling it will raise the exception SystemExit."""
+    try:
+        code = int(code)
+    except ValueError:
+        pass
+    raise SystemExit(code)
+
+
+_varnum = 0
+
+
+class Variable:
+    """Class to define value holders for e.g. buttons.
+
+    Subclasses StringVar, IntVar, DoubleVar, BooleanVar are specializations
+    that constrain the type of the value returned from get()."""
+    _default = ""
+    _tk = None
+    _tclCommands = None
+
+    def __init__(self, master=None, value=None, name=None):
+        """Construct a variable
+
+        MASTER can be given as master widget.
+        VALUE is an optional value (defaults to "")
+        NAME is an optional Tcl name (defaults to PY_VARnum).
+
+        If NAME matches an existing variable and VALUE is omitted
+        then the existing value is retained.
+        """
+        # check for type of NAME parameter to override weird error message
+        # raised from Modules/_tkinter.c:SetVar like:
+        # TypeError: setvar() takes exactly 3 arguments (2 given)
+        if name is not None and not isinstance(name, str):
+            raise TypeError("name must be a string")
+        global _varnum
+        if master is None:
+            master = _get_default_root('create variable')
+        self._root = master._root()
+        self._tk = master.tk
+        if name:
+            self._name = name
+        else:
+            self._name = 'PY_VAR' + repr(_varnum)
+            _varnum += 1
+        if value is not None:
+            self.initialize(value)
+        elif not self._tk.getboolean(self._tk.call("info", "exists", self._name)):
+            self.initialize(self._default)
+
+    def __del__(self):
+        """Unset the variable in Tcl."""
+        if self._tk is None:
+            return
+        if self._tk.getboolean(self._tk.call("info", "exists", self._name)):
+            self._tk.globalunsetvar(self._name)
+        if self._tclCommands is not None:
+            for name in self._tclCommands:
+                self._tk.deletecommand(name)
+            self._tclCommands = None
+
+    def __str__(self):
+        """Return the name of the variable in Tcl."""
+        return self._name
+
+    def set(self, value):
+        """Set the variable to VALUE."""
+        return self._tk.globalsetvar(self._name, value)
+
+    initialize = set
+
+    def get(self):
+        """Return value of variable."""
+        return self._tk.globalgetvar(self._name)
+
+    def _register(self, callback):
+        f = CallWrapper(callback, None, self._root).__call__
+        cbname = repr(id(f))
+        try:
+            callback = callback.__func__
+        except AttributeError:
+            pass
+        try:
+            cbname = cbname + callback.__name__
+        except AttributeError:
+            pass
+        self._tk.createcommand(cbname, f)
+        if self._tclCommands is None:
+            self._tclCommands = []
+        self._tclCommands.append(cbname)
+        return cbname
+
+    def trace_add(self, mode, callback):
+        """Define a trace callback for the variable.
+
+        Mode is one of "read", "write", "unset", or a list or tuple of
+        such strings.
+        Callback must be a function which is called when the variable is
+        read, written or unset.
+
+        Return the name of the callback.
+        """
+        cbname = self._register(callback)
+        self._tk.call('trace', 'add', 'variable',
+                      self._name, mode, (cbname,))
+        return cbname
+
+    def trace_remove(self, mode, cbname):
+        """Delete the trace callback for a variable.
+
+        Mode is one of "read", "write", "unset" or a list or tuple of
+        such strings.  Must be same as were specified in trace_add().
+        cbname is the name of the callback returned from trace_add().
+        """
+        self._tk.call('trace', 'remove', 'variable',
+                      self._name, mode, cbname)
+        for m, ca in self.trace_info():
+            if self._tk.splitlist(ca)[0] == cbname:
+                break
+        else:
+            self._tk.deletecommand(cbname)
+            try:
+                self._tclCommands.remove(cbname)
+            except ValueError:
+                pass
+
+    def trace_info(self):
+        """Return all trace callback information."""
+        splitlist = self._tk.splitlist
+        return [(splitlist(k), v) for k, v in map(splitlist,
+            splitlist(self._tk.call('trace', 'info', 'variable', self._name)))]
+
+    def trace_variable(self, mode, callback):
+        """Define a trace callback for the variable.
+
+        MODE is one of "r", "w", "u" for read, write, undefine.
+        CALLBACK must be a function which is called when
+        the variable is read, written or undefined.
+
+        Return the name of the callback.
+
+        This deprecated method wraps a deprecated Tcl method removed
+        in Tcl 9.0.  Use trace_add() instead.
+        """
+        import warnings
+        warnings.warn(
+                "trace_variable() is deprecated and not supported with Tcl 9; "
+                "use trace_add() instead.",
+                DeprecationWarning, stacklevel=2)
+        cbname = self._register(callback)
+        self._tk.call("trace", "variable", self._name, mode, cbname)
+        return cbname
+
+    trace = trace_variable
+
+    def trace_vdelete(self, mode, cbname):
+        """Delete the trace callback for a variable.
+
+        MODE is one of "r", "w", "u" for read, write, undefine.
+        CBNAME is the name of the callback returned from trace_variable or trace.
+
+        This deprecated method wraps a deprecated Tcl method removed
+        in Tcl 9.0.  Use trace_remove() instead.
+        """
+        import warnings
+        warnings.warn(
+                "trace_vdelete() is deprecated and not supported with Tcl 9; "
+                "use trace_remove() instead.",
+                DeprecationWarning, stacklevel=2)
+        self._tk.call("trace", "vdelete", self._name, mode, cbname)
+        cbname = self._tk.splitlist(cbname)[0]
+        for m, ca in self.trace_info():
+            if self._tk.splitlist(ca)[0] == cbname:
+                break
+        else:
+            self._tk.deletecommand(cbname)
+            try:
+                self._tclCommands.remove(cbname)
+            except ValueError:
+                pass
+
+    def trace_vinfo(self):
+        """Return all trace callback information.
+
+        This deprecated method wraps a deprecated Tcl method removed
+        in Tcl 9.0.  Use trace_info() instead.
+        """
+        import warnings
+        warnings.warn(
+                "trace_vinfo() is deprecated and not supported with Tcl 9; "
+                "use trace_info() instead.",
+                DeprecationWarning, stacklevel=2)
+        return [self._tk.splitlist(x) for x in self._tk.splitlist(
+            self._tk.call("trace", "vinfo", self._name))]
+
+    def __eq__(self, other):
+        if not isinstance(other, Variable):
+            return NotImplemented
+        return (self._name == other._name
+                and self.__class__.__name__ == other.__class__.__name__
+                and self._tk == other._tk)
+
+
+class StringVar(Variable):
+    """Value holder for strings variables."""
+    _default = ""
+
+    def __init__(self, master=None, value=None, name=None):
+        """Construct a string variable.
+
+        MASTER can be given as master widget.
+        VALUE is an optional value (defaults to "")
+        NAME is an optional Tcl name (defaults to PY_VARnum).
+
+        If NAME matches an existing variable and VALUE is omitted
+        then the existing value is retained.
+        """
+        Variable.__init__(self, master, value, name)
+
+    def get(self):
+        """Return value of variable as string."""
+        value = self._tk.globalgetvar(self._name)
+        if isinstance(value, str):
+            return value
+        return str(value)
+
+
+class IntVar(Variable):
+    """Value holder for integer variables."""
+    _default = 0
+
+    def __init__(self, master=None, value=None, name=None):
+        """Construct an integer variable.
+
+        MASTER can be given as master widget.
+        VALUE is an optional value (defaults to 0)
+        NAME is an optional Tcl name (defaults to PY_VARnum).
+
+        If NAME matches an existing variable and VALUE is omitted
+        then the existing value is retained.
+        """
+        Variable.__init__(self, master, value, name)
+
+    def get(self):
+        """Return the value of the variable as an integer."""
+        value = self._tk.globalgetvar(self._name)
+        try:
+            return self._tk.getint(value)
+        except (TypeError, TclError):
+            return int(self._tk.getdouble(value))
+
+
+class DoubleVar(Variable):
+    """Value holder for float variables."""
+    _default = 0.0
+
+    def __init__(self, master=None, value=None, name=None):
+        """Construct a float variable.
+
+        MASTER can be given as master widget.
+        VALUE is an optional value (defaults to 0.0)
+        NAME is an optional Tcl name (defaults to PY_VARnum).
+
+        If NAME matches an existing variable and VALUE is omitted
+        then the existing value is retained.
+        """
+        Variable.__init__(self, master, value, name)
+
+    def get(self):
+        """Return the value of the variable as a float."""
+        return self._tk.getdouble(self._tk.globalgetvar(self._name))
+
+
+class BooleanVar(Variable):
+    """Value holder for boolean variables."""
+    _default = False
+
+    def __init__(self, master=None, value=None, name=None):
+        """Construct a boolean variable.
+
+        MASTER can be given as master widget.
+        VALUE is an optional value (defaults to False)
+        NAME is an optional Tcl name (defaults to PY_VARnum).
+
+        If NAME matches an existing variable and VALUE is omitted
+        then the existing value is retained.
+        """
+        Variable.__init__(self, master, value, name)
+
+    def set(self, value):
+        """Set the variable to VALUE."""
+        return self._tk.globalsetvar(self._name, self._tk.getboolean(value))
+
+    initialize = set
+
+    def get(self):
+        """Return the value of the variable as a bool."""
+        try:
+            return self._tk.getboolean(self._tk.globalgetvar(self._name))
+        except TclError:
+            raise ValueError("invalid literal for getboolean()")
+
+
+def mainloop(n=0):
+    """Run the main loop of Tcl."""
+    _get_default_root('run the main loop').tk.mainloop(n)
+
+
+getint = int
+
+getdouble = float
+
+
+def getboolean(s):
+    """Convert Tcl object to True or False."""
+    try:
+        return _get_default_root('use getboolean()').tk.getboolean(s)
+    except TclError:
+        raise ValueError("invalid literal for getboolean()")
+
+
+# Methods defined on both toplevel and interior widgets
+
+class Misc:
+    """Internal class.
+
+    Base class which defines methods common for interior widgets."""
+
+    # used for generating child widget names
+    _last_child_ids = None
+
+    # XXX font command?
+    _tclCommands = None
+
+    def destroy(self):
+        """Internal function.
+
+        Delete all Tcl commands created for
+        this widget in the Tcl interpreter."""
+        if self._tclCommands is not None:
+            for name in self._tclCommands:
+                self.tk.deletecommand(name)
+            self._tclCommands = None
+
+    def deletecommand(self, name):
+        """Internal function.
+
+        Delete the Tcl command provided in NAME."""
+        self.tk.deletecommand(name)
+        try:
+            self._tclCommands.remove(name)
+        except ValueError:
+            pass
+
+    def tk_strictMotif(self, boolean=None):
+        """Set Tcl internal variable, whether the look and feel
+        should adhere to Motif.
+
+        A parameter of 1 means adhere to Motif (e.g. no color
+        change if mouse passes over slider).
+        Returns the set value."""
+        return self.tk.getboolean(self.tk.call(
+            'set', 'tk_strictMotif', boolean))
+
+    def tk_bisque(self):
+        """Change the color scheme to light brown as used in Tk 3.6 and before."""
+        self.tk.call('tk_bisque')
+
+    def tk_setPalette(self, *args, **kw):
+        """Set a new color scheme for all widget elements.
+
+        A single color as argument will cause that all colors of Tk
+        widget elements are derived from this.
+        Alternatively several keyword parameters and its associated
+        colors can be given. The following keywords are valid:
+        activeBackground, foreground, selectColor,
+        activeForeground, highlightBackground, selectBackground,
+        background, highlightColor, selectForeground,
+        disabledForeground, insertBackground, troughColor."""
+        self.tk.call(('tk_setPalette',)
+              + _flatten(args) + _flatten(list(kw.items())))
+
+    def wait_variable(self, name='PY_VAR'):
+        """Wait until the variable is modified.
+
+        A parameter of type IntVar, StringVar, DoubleVar or
+        BooleanVar must be given."""
+        self.tk.call('tkwait', 'variable', name)
+    waitvar = wait_variable # XXX b/w compat
+
+    def wait_window(self, window=None):
+        """Wait until a WIDGET is destroyed.
+
+        If no parameter is given self is used."""
+        if window is None:
+            window = self
+        self.tk.call('tkwait', 'window', window._w)
+
+    def wait_visibility(self, window=None):
+        """Wait until the visibility of a WIDGET changes
+        (e.g. it appears).
+
+        If no parameter is given self is used."""
+        if window is None:
+            window = self
+        self.tk.call('tkwait', 'visibility', window._w)
+
+    def setvar(self, name='PY_VAR', value='1'):
+        """Set Tcl variable NAME to VALUE."""
+        self.tk.setvar(name, value)
+
+    def getvar(self, name='PY_VAR'):
+        """Return value of Tcl variable NAME."""
+        return self.tk.getvar(name)
+
+    def getint(self, s):
+        try:
+            return self.tk.getint(s)
+        except TclError as exc:
+            raise ValueError(str(exc))
+
+    def getdouble(self, s):
+        try:
+            return self.tk.getdouble(s)
+        except TclError as exc:
+            raise ValueError(str(exc))
+
+    def getboolean(self, s):
+        """Return a boolean value for Tcl boolean values true and false given as parameter."""
+        try:
+            return self.tk.getboolean(s)
+        except TclError:
+            raise ValueError("invalid literal for getboolean()")
+
+    def focus_set(self):
+        """Direct input focus to this widget.
+
+        If the application currently does not have the focus
+        this widget will get the focus if the application gets
+        the focus through the window manager."""
+        self.tk.call('focus', self._w)
+    focus = focus_set # XXX b/w compat?
+
+    def focus_force(self):
+        """Direct input focus to this widget even if the
+        application does not have the focus. Use with
+        caution!"""
+        self.tk.call('focus', '-force', self._w)
+
+    def focus_get(self):
+        """Return the widget which has currently the focus in the
+        application.
+
+        Use focus_displayof to allow working with several
+        displays. Return None if application does not have
+        the focus."""
+        name = self.tk.call('focus')
+        if name == 'none' or not name: return None
+        return self._nametowidget(name)
+
+    def focus_displayof(self):
+        """Return the widget which has currently the focus on the
+        display where this widget is located.
+
+        Return None if the application does not have the focus."""
+        name = self.tk.call('focus', '-displayof', self._w)
+        if name == 'none' or not name: return None
+        return self._nametowidget(name)
+
+    def focus_lastfor(self):
+        """Return the widget which would have the focus if top level
+        for this widget gets the focus from the window manager."""
+        name = self.tk.call('focus', '-lastfor', self._w)
+        if name == 'none' or not name: return None
+        return self._nametowidget(name)
+
+    def tk_focusFollowsMouse(self):
+        """The widget under mouse will get automatically focus. Can not
+        be disabled easily."""
+        self.tk.call('tk_focusFollowsMouse')
+
+    def tk_focusNext(self):
+        """Return the next widget in the focus order which follows
+        widget which has currently the focus.
+
+        The focus order first goes to the next child, then to
+        the children of the child recursively and then to the
+        next sibling which is higher in the stacking order.  A
+        widget is omitted if it has the takefocus option set
+        to 0."""
+        name = self.tk.call('tk_focusNext', self._w)
+        if not name: return None
+        return self._nametowidget(name)
+
+    def tk_focusPrev(self):
+        """Return previous widget in the focus order. See tk_focusNext for details."""
+        name = self.tk.call('tk_focusPrev', self._w)
+        if not name: return None
+        return self._nametowidget(name)
+
+    def after(self, ms, func=None, *args, **kw):
+        """Call function once after given time.
+
+        MS specifies the time in milliseconds. FUNC gives the
+        function which shall be called. Additional parameters
+        are given as parameters to the function call.  Return
+        identifier to cancel scheduling with after_cancel."""
+        if func is None:
+            # I'd rather use time.sleep(ms*0.001)
+            self.tk.call('after', ms)
+            return None
+        else:
+            def callit():
+                try:
+                    func(*args, **kw)
+                finally:
+                    try:
+                        self.deletecommand(name)
+                    except TclError:
+                        pass
+            try:
+                callit.__name__ = func.__name__
+            except AttributeError:
+                # Required for callable classes (bpo-44404)
+                callit.__name__ = type(func).__name__
+            name = self._register(callit)
+            return self.tk.call('after', ms, name)
+
+    def after_idle(self, func, *args, **kw):
+        """Call FUNC once if the Tcl main loop has no event to
+        process.
+
+        Return an identifier to cancel the scheduling with
+        after_cancel."""
+        return self.after('idle', func, *args, **kw)
+
+    def after_cancel(self, id):
+        """Cancel scheduling of function identified with ID.
+
+        Identifier returned by after or after_idle must be
+        given as first parameter.
+        """
+        if not id:
+            raise ValueError('id must be a valid identifier returned from '
+                             'after or after_idle')
+        try:
+            data = self.tk.call('after', 'info', id)
+            script = self.tk.splitlist(data)[0]
+            self.deletecommand(script)
+        except TclError:
+            pass
+        self.tk.call('after', 'cancel', id)
+
+    def after_info(self, id=None):
+        """Return information about existing event handlers.
+
+        With no argument, return a tuple of the identifiers for all existing
+        event handlers created by the after and after_idle commands for this
+        interpreter.  If id is supplied, it specifies an existing handler; id
+        must have been the return value from some previous call to after or
+        after_idle and it must not have triggered yet or been canceled. If the
+        id doesn't exist, a TclError is raised.  Otherwise, the return value is
+        a tuple containing (script, type) where script is a reference to the
+        function to be called by the event handler and type is either 'idle'
+        or 'timer' to indicate what kind of event handler it is.
+        """
+        return self.tk.splitlist(self.tk.call('after', 'info', id))
+
+    def bell(self, displayof=0):
+        """Ring a display's bell."""
+        self.tk.call(('bell',) + self._displayof(displayof))
+
+    def tk_busy_cget(self, option):
+        """Return the value of busy configuration option.
+
+        The widget must have been previously made busy by
+        tk_busy_hold().  Option may have any of the values accepted by
+        tk_busy_hold().
+        """
+        return self.tk.call('tk', 'busy', 'cget', self._w, '-'+option)
+    busy_cget = tk_busy_cget
+
+    def tk_busy_configure(self, cnf=None, **kw):
+        """Query or modify the busy configuration options.
+
+        The widget must have been previously made busy by
+        tk_busy_hold().  Options may have any of the values accepted by
+        tk_busy_hold().
+
+        Please note that the option database is referenced by the widget
+        name or class.  For example, if a Frame widget with name "frame"
+        is to be made busy, the busy cursor can be specified for it by
+        either call:
+
+            w.option_add('*frame.busyCursor', 'gumby')
+            w.option_add('*Frame.BusyCursor', 'gumby')
+        """
+        if kw:
+            cnf = _cnfmerge((cnf, kw))
+        elif cnf:
+            cnf = _cnfmerge(cnf)
+        if cnf is None:
+            return self._getconfigure(
+                        'tk', 'busy', 'configure', self._w)
+        if isinstance(cnf, str):
+            return self._getconfigure1(
+                        'tk', 'busy', 'configure', self._w, '-'+cnf)
+        self.tk.call('tk', 'busy', 'configure', self._w, *self._options(cnf))
+    busy_config = busy_configure = tk_busy_config = tk_busy_configure
+
+    def tk_busy_current(self, pattern=None):
+        """Return a list of widgets that are currently busy.
+
+        If a pattern is given, only busy widgets whose path names match
+        a pattern are returned.
+        """
+        return [self._nametowidget(x) for x in
+                self.tk.splitlist(self.tk.call(
+                   'tk', 'busy', 'current', pattern))]
+    busy_current = tk_busy_current
+
+    def tk_busy_forget(self):
+        """Make this widget no longer busy.
+
+        User events will again be received by the widget.
+        """
+        self.tk.call('tk', 'busy', 'forget', self._w)
+    busy_forget = tk_busy_forget
+
+    def tk_busy_hold(self, **kw):
+        """Make this widget appear busy.
+
+        The specified widget and its descendants will be blocked from
+        user interactions.  Normally update() should be called
+        immediately afterward to insure that the hold operation is in
+        effect before the application starts its processing.
+
+        The only supported configuration option is:
+
+            cursor: the cursor to be displayed when the widget is made
+                    busy.
+        """
+        self.tk.call('tk', 'busy', 'hold', self._w, *self._options(kw))
+    busy = busy_hold = tk_busy = tk_busy_hold
+
+    def tk_busy_status(self):
+        """Return True if the widget is busy, False otherwise."""
+        return self.tk.getboolean(self.tk.call(
+                'tk', 'busy', 'status', self._w))
+    busy_status = tk_busy_status
+
+    # Clipboard handling:
+    def clipboard_get(self, **kw):
+        """Retrieve data from the clipboard on window's display.
+
+        The window keyword defaults to the root window of the Tkinter
+        application.
+
+        The type keyword specifies the form in which the data is
+        to be returned and should be an atom name such as STRING
+        or FILE_NAME.  Type defaults to STRING, except on X11, where the default
+        is to try UTF8_STRING and fall back to STRING.
+
+        This command is equivalent to:
+
+        selection_get(CLIPBOARD)
+        """
+        if 'type' not in kw and self._windowingsystem == 'x11':
+            try:
+                kw['type'] = 'UTF8_STRING'
+                return self.tk.call(('clipboard', 'get') + self._options(kw))
+            except TclError:
+                del kw['type']
+        return self.tk.call(('clipboard', 'get') + self._options(kw))
+
+    def clipboard_clear(self, **kw):
+        """Clear the data in the Tk clipboard.
+
+        A widget specified for the optional displayof keyword
+        argument specifies the target display."""
+        if 'displayof' not in kw: kw['displayof'] = self._w
+        self.tk.call(('clipboard', 'clear') + self._options(kw))
+
+    def clipboard_append(self, string, **kw):
+        """Append STRING to the Tk clipboard.
+
+        A widget specified at the optional displayof keyword
+        argument specifies the target display. The clipboard
+        can be retrieved with selection_get."""
+        if 'displayof' not in kw: kw['displayof'] = self._w
+        self.tk.call(('clipboard', 'append') + self._options(kw)
+              + ('--', string))
+    # XXX grab current w/o window argument
+
+    def grab_current(self):
+        """Return widget which has currently the grab in this application
+        or None."""
+        name = self.tk.call('grab', 'current', self._w)
+        if not name: return None
+        return self._nametowidget(name)
+
+    def grab_release(self):
+        """Release grab for this widget if currently set."""
+        self.tk.call('grab', 'release', self._w)
+
+    def grab_set(self):
+        """Set grab for this widget.
+
+        A grab directs all events to this and descendant
+        widgets in the application."""
+        self.tk.call('grab', 'set', self._w)
+
+    def grab_set_global(self):
+        """Set global grab for this widget.
+
+        A global grab directs all events to this and
+        descendant widgets on the display. Use with caution -
+        other applications do not get events anymore."""
+        self.tk.call('grab', 'set', '-global', self._w)
+
+    def grab_status(self):
+        """Return None, "local" or "global" if this widget has
+        no, a local or a global grab."""
+        status = self.tk.call('grab', 'status', self._w)
+        if status == 'none': status = None
+        return status
+
+    def option_add(self, pattern, value, priority = None):
+        """Set a VALUE (second parameter) for an option
+        PATTERN (first parameter).
+
+        An optional third parameter gives the numeric priority
+        (defaults to 80)."""
+        self.tk.call('option', 'add', pattern, value, priority)
+
+    def option_clear(self):
+        """Clear the option database.
+
+        It will be reloaded if option_add is called."""
+        self.tk.call('option', 'clear')
+
+    def option_get(self, name, className):
+        """Return the value for an option NAME for this widget
+        with CLASSNAME.
+
+        Values with higher priority override lower values."""
+        return self.tk.call('option', 'get', self._w, name, className)
+
+    def option_readfile(self, fileName, priority = None):
+        """Read file FILENAME into the option database.
+
+        An optional second parameter gives the numeric
+        priority."""
+        self.tk.call('option', 'readfile', fileName, priority)
+
+    def selection_clear(self, **kw):
+        """Clear the current X selection."""
+        if 'displayof' not in kw: kw['displayof'] = self._w
+        self.tk.call(('selection', 'clear') + self._options(kw))
+
+    def selection_get(self, **kw):
+        """Return the contents of the current X selection.
+
+        A keyword parameter selection specifies the name of
+        the selection and defaults to PRIMARY.  A keyword
+        parameter displayof specifies a widget on the display
+        to use. A keyword parameter type specifies the form of data to be
+        fetched, defaulting to STRING except on X11, where UTF8_STRING is tried
+        before STRING."""
+        if 'displayof' not in kw: kw['displayof'] = self._w
+        if 'type' not in kw and self._windowingsystem == 'x11':
+            try:
+                kw['type'] = 'UTF8_STRING'
+                return self.tk.call(('selection', 'get') + self._options(kw))
+            except TclError:
+                del kw['type']
+        return self.tk.call(('selection', 'get') + self._options(kw))
+
+    def selection_handle(self, command, **kw):
+        """Specify a function COMMAND to call if the X
+        selection owned by this widget is queried by another
+        application.
+
+        This function must return the contents of the
+        selection. The function will be called with the
+        arguments OFFSET and LENGTH which allows the chunking
+        of very long selections. The following keyword
+        parameters can be provided:
+        selection - name of the selection (default PRIMARY),
+        type - type of the selection (e.g. STRING, FILE_NAME)."""
+        name = self._register(command)
+        self.tk.call(('selection', 'handle') + self._options(kw)
+              + (self._w, name))
+
+    def selection_own(self, **kw):
+        """Become owner of X selection.
+
+        A keyword parameter selection specifies the name of
+        the selection (default PRIMARY)."""
+        self.tk.call(('selection', 'own') +
+                 self._options(kw) + (self._w,))
+
+    def selection_own_get(self, **kw):
+        """Return owner of X selection.
+
+        The following keyword parameter can
+        be provided:
+        selection - name of the selection (default PRIMARY),
+        type - type of the selection (e.g. STRING, FILE_NAME)."""
+        if 'displayof' not in kw: kw['displayof'] = self._w
+        name = self.tk.call(('selection', 'own') + self._options(kw))
+        if not name: return None
+        return self._nametowidget(name)
+
+    def send(self, interp, cmd, *args):
+        """Send Tcl command CMD to different interpreter INTERP to be executed."""
+        return self.tk.call(('send', interp, cmd) + args)
+
+    def lower(self, belowThis=None):
+        """Lower this widget in the stacking order."""
+        self.tk.call('lower', self._w, belowThis)
+
+    def tkraise(self, aboveThis=None):
+        """Raise this widget in the stacking order."""
+        self.tk.call('raise', self._w, aboveThis)
+
+    lift = tkraise
+
+    def info_patchlevel(self):
+        """Returns the exact version of the Tcl library."""
+        patchlevel = self.tk.call('info', 'patchlevel')
+        return _parse_version(patchlevel)
+
+    def winfo_atom(self, name, displayof=0):
+        """Return integer which represents atom NAME."""
+        args = ('winfo', 'atom') + self._displayof(displayof) + (name,)
+        return self.tk.getint(self.tk.call(args))
+
+    def winfo_atomname(self, id, displayof=0):
+        """Return name of atom with identifier ID."""
+        args = ('winfo', 'atomname') \
+               + self._displayof(displayof) + (id,)
+        return self.tk.call(args)
+
+    def winfo_cells(self):
+        """Return number of cells in the colormap for this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'cells', self._w))
+
+    def winfo_children(self):
+        """Return a list of all widgets which are children of this widget."""
+        result = []
+        for child in self.tk.splitlist(
+            self.tk.call('winfo', 'children', self._w)):
+            try:
+                # Tcl sometimes returns extra windows, e.g. for
+                # menus; those need to be skipped
+                result.append(self._nametowidget(child))
+            except KeyError:
+                pass
+        return result
+
+    def winfo_class(self):
+        """Return window class name of this widget."""
+        return self.tk.call('winfo', 'class', self._w)
+
+    def winfo_colormapfull(self):
+        """Return True if at the last color request the colormap was full."""
+        return self.tk.getboolean(
+            self.tk.call('winfo', 'colormapfull', self._w))
+
+    def winfo_containing(self, rootX, rootY, displayof=0):
+        """Return the widget which is at the root coordinates ROOTX, ROOTY."""
+        args = ('winfo', 'containing') \
+               + self._displayof(displayof) + (rootX, rootY)
+        name = self.tk.call(args)
+        if not name: return None
+        return self._nametowidget(name)
+
+    def winfo_depth(self):
+        """Return the number of bits per pixel."""
+        return self.tk.getint(self.tk.call('winfo', 'depth', self._w))
+
+    def winfo_exists(self):
+        """Return true if this widget exists."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'exists', self._w))
+
+    def winfo_fpixels(self, number):
+        """Return the number of pixels for the given distance NUMBER
+        (e.g. "3c") as float."""
+        return self.tk.getdouble(self.tk.call(
+            'winfo', 'fpixels', self._w, number))
+
+    def winfo_geometry(self):
+        """Return geometry string for this widget in the form "widthxheight+X+Y"."""
+        return self.tk.call('winfo', 'geometry', self._w)
+
+    def winfo_height(self):
+        """Return height of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'height', self._w))
+
+    def winfo_id(self):
+        """Return identifier ID for this widget."""
+        return int(self.tk.call('winfo', 'id', self._w), 0)
+
+    def winfo_interps(self, displayof=0):
+        """Return the name of all Tcl interpreters for this display."""
+        args = ('winfo', 'interps') + self._displayof(displayof)
+        return self.tk.splitlist(self.tk.call(args))
+
+    def winfo_ismapped(self):
+        """Return true if this widget is mapped."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'ismapped', self._w))
+
+    def winfo_manager(self):
+        """Return the window manager name for this widget."""
+        return self.tk.call('winfo', 'manager', self._w)
+
+    def winfo_name(self):
+        """Return the name of this widget."""
+        return self.tk.call('winfo', 'name', self._w)
+
+    def winfo_parent(self):
+        """Return the name of the parent of this widget."""
+        return self.tk.call('winfo', 'parent', self._w)
+
+    def winfo_pathname(self, id, displayof=0):
+        """Return the pathname of the widget given by ID."""
+        if isinstance(id, int):
+            id = hex(id)
+        args = ('winfo', 'pathname') \
+               + self._displayof(displayof) + (id,)
+        return self.tk.call(args)
+
+    def winfo_pixels(self, number):
+        """Rounded integer value of winfo_fpixels."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'pixels', self._w, number))
+
+    def winfo_pointerx(self):
+        """Return the x coordinate of the pointer on the root window."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'pointerx', self._w))
+
+    def winfo_pointerxy(self):
+        """Return a tuple of x and y coordinates of the pointer on the root window."""
+        return self._getints(
+            self.tk.call('winfo', 'pointerxy', self._w))
+
+    def winfo_pointery(self):
+        """Return the y coordinate of the pointer on the root window."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'pointery', self._w))
+
+    def winfo_reqheight(self):
+        """Return requested height of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'reqheight', self._w))
+
+    def winfo_reqwidth(self):
+        """Return requested width of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'reqwidth', self._w))
+
+    def winfo_rgb(self, color):
+        """Return a tuple of integer RGB values in range(65536) for color in this widget."""
+        return self._getints(
+            self.tk.call('winfo', 'rgb', self._w, color))
+
+    def winfo_rootx(self):
+        """Return x coordinate of upper left corner of this widget on the
+        root window."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'rootx', self._w))
+
+    def winfo_rooty(self):
+        """Return y coordinate of upper left corner of this widget on the
+        root window."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'rooty', self._w))
+
+    def winfo_screen(self):
+        """Return the screen name of this widget."""
+        return self.tk.call('winfo', 'screen', self._w)
+
+    def winfo_screencells(self):
+        """Return the number of the cells in the colormap of the screen
+        of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screencells', self._w))
+
+    def winfo_screendepth(self):
+        """Return the number of bits per pixel of the root window of the
+        screen of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screendepth', self._w))
+
+    def winfo_screenheight(self):
+        """Return the number of pixels of the height of the screen of this widget
+        in pixel."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screenheight', self._w))
+
+    def winfo_screenmmheight(self):
+        """Return the number of pixels of the height of the screen of
+        this widget in mm."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screenmmheight', self._w))
+
+    def winfo_screenmmwidth(self):
+        """Return the number of pixels of the width of the screen of
+        this widget in mm."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screenmmwidth', self._w))
+
+    def winfo_screenvisual(self):
+        """Return one of the strings directcolor, grayscale, pseudocolor,
+        staticcolor, staticgray, or truecolor for the default
+        colormodel of this screen."""
+        return self.tk.call('winfo', 'screenvisual', self._w)
+
+    def winfo_screenwidth(self):
+        """Return the number of pixels of the width of the screen of
+        this widget in pixel."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'screenwidth', self._w))
+
+    def winfo_server(self):
+        """Return information of the X-Server of the screen of this widget in
+        the form "XmajorRminor vendor vendorVersion"."""
+        return self.tk.call('winfo', 'server', self._w)
+
+    def winfo_toplevel(self):
+        """Return the toplevel widget of this widget."""
+        return self._nametowidget(self.tk.call(
+            'winfo', 'toplevel', self._w))
+
+    def winfo_viewable(self):
+        """Return true if the widget and all its higher ancestors are mapped."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'viewable', self._w))
+
+    def winfo_visual(self):
+        """Return one of the strings directcolor, grayscale, pseudocolor,
+        staticcolor, staticgray, or truecolor for the
+        colormodel of this widget."""
+        return self.tk.call('winfo', 'visual', self._w)
+
+    def winfo_visualid(self):
+        """Return the X identifier for the visual for this widget."""
+        return self.tk.call('winfo', 'visualid', self._w)
+
+    def winfo_visualsavailable(self, includeids=False):
+        """Return a list of all visuals available for the screen
+        of this widget.
+
+        Each item in the list consists of a visual name (see winfo_visual), a
+        depth and if includeids is true is given also the X identifier."""
+        data = self.tk.call('winfo', 'visualsavailable', self._w,
+                            'includeids' if includeids else None)
+        data = [self.tk.splitlist(x) for x in self.tk.splitlist(data)]
+        return [self.__winfo_parseitem(x) for x in data]
+
+    def __winfo_parseitem(self, t):
+        """Internal function."""
+        return t[:1] + tuple(map(self.__winfo_getint, t[1:]))
+
+    def __winfo_getint(self, x):
+        """Internal function."""
+        return int(x, 0)
+
+    def winfo_vrootheight(self):
+        """Return the height of the virtual root window associated with this
+        widget in pixels. If there is no virtual root window return the
+        height of the screen."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'vrootheight', self._w))
+
+    def winfo_vrootwidth(self):
+        """Return the width of the virtual root window associated with this
+        widget in pixel. If there is no virtual root window return the
+        width of the screen."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'vrootwidth', self._w))
+
+    def winfo_vrootx(self):
+        """Return the x offset of the virtual root relative to the root
+        window of the screen of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'vrootx', self._w))
+
+    def winfo_vrooty(self):
+        """Return the y offset of the virtual root relative to the root
+        window of the screen of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'vrooty', self._w))
+
+    def winfo_width(self):
+        """Return the width of this widget."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'width', self._w))
+
+    def winfo_x(self):
+        """Return the x coordinate of the upper left corner of this widget
+        in the parent."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'x', self._w))
+
+    def winfo_y(self):
+        """Return the y coordinate of the upper left corner of this widget
+        in the parent."""
+        return self.tk.getint(
+            self.tk.call('winfo', 'y', self._w))
+
+    def update(self):
+        """Enter event loop until all pending events have been processed by Tcl."""
+        self.tk.call('update')
+
+    def update_idletasks(self):
+        """Enter event loop until all idle callbacks have been called. This
+        will update the display of windows but not process events caused by
+        the user."""
+        self.tk.call('update', 'idletasks')
+
+    def bindtags(self, tagList=None):
+        """Set or get the list of bindtags for this widget.
+
+        With no argument return the list of all bindtags associated with
+        this widget. With a list of strings as argument the bindtags are
+        set to this list. The bindtags determine in which order events are
+        processed (see bind)."""
+        if tagList is None:
+            return self.tk.splitlist(
+                self.tk.call('bindtags', self._w))
+        else:
+            self.tk.call('bindtags', self._w, tagList)
+
+    def _bind(self, what, sequence, func, add, needcleanup=1):
+        """Internal function."""
+        if isinstance(func, str):
+            self.tk.call(what + (sequence, func))
+        elif func:
+            funcid = self._register(func, self._substitute,
+                        needcleanup)
+            cmd = ('%sif {"[%s %s]" == "break"} break\n'
+                   %
+                   (add and '+' or '',
+                funcid, self._subst_format_str))
+            self.tk.call(what + (sequence, cmd))
+            return funcid
+        elif sequence:
+            return self.tk.call(what + (sequence,))
+        else:
+            return self.tk.splitlist(self.tk.call(what))
+
+    def bind(self, sequence=None, func=None, add=None):
+        """Bind to this widget at event SEQUENCE a call to function FUNC.
+
+        SEQUENCE is a string of concatenated event
+        patterns. An event pattern is of the form
+        <MODIFIER-MODIFIER-TYPE-DETAIL> where MODIFIER is one
+        of Control, Mod2, M2, Shift, Mod3, M3, Lock, Mod4, M4,
+        Button1, B1, Mod5, M5 Button2, B2, Meta, M, Button3,
+        B3, Alt, Button4, B4, Double, Button5, B5 Triple,
+        Mod1, M1. TYPE is one of Activate, Enter, Map,
+        ButtonPress, Button, Expose, Motion, ButtonRelease
+        FocusIn, MouseWheel, Circulate, FocusOut, Property,
+        Colormap, Gravity Reparent, Configure, KeyPress, Key,
+        Unmap, Deactivate, KeyRelease Visibility, Destroy,
+        Leave and DETAIL is the button number for ButtonPress,
+        ButtonRelease and DETAIL is the Keysym for KeyPress and
+        KeyRelease. Examples are
+        <Control-Button-1> for pressing Control and mouse button 1 or
+        <Alt-A> for pressing A and the Alt key (KeyPress can be omitted).
+        An event pattern can also be a virtual event of the form
+        <<AString>> where AString can be arbitrary. This
+        event can be generated by event_generate.
+        If events are concatenated they must appear shortly
+        after each other.
+
+        FUNC will be called if the event sequence occurs with an
+        instance of Event as argument. If the return value of FUNC is
+        "break" no further bound function is invoked.
+
+        An additional boolean parameter ADD specifies whether FUNC will
+        be called additionally to the other bound function or whether
+        it will replace the previous function.
+
+        Bind will return an identifier to allow deletion of the bound function with
+        unbind without memory leak.
+
+        If FUNC or SEQUENCE is omitted the bound function or list
+        of bound events are returned."""
+
+        return self._bind(('bind', self._w), sequence, func, add)
+
+    def unbind(self, sequence, funcid=None):
+        """Unbind for this widget the event SEQUENCE.
+
+        If FUNCID is given, only unbind the function identified with FUNCID
+        and also delete the corresponding Tcl command.
+
+        Otherwise destroy the current binding for SEQUENCE, leaving SEQUENCE
+        unbound.
+        """
+        self._unbind(('bind', self._w, sequence), funcid)
+
+    def _unbind(self, what, funcid=None):
+        if funcid is None:
+            self.tk.call(*what, '')
+        else:
+            lines = self.tk.call(what).split('\n')
+            prefix = f'if {{"[{funcid} '
+            keep = '\n'.join(line for line in lines
+                             if not line.startswith(prefix))
+            if not keep.strip():
+                keep = ''
+            self.tk.call(*what, keep)
+            self.deletecommand(funcid)
+
+    def bind_all(self, sequence=None, func=None, add=None):
+        """Bind to all widgets at an event SEQUENCE a call to function FUNC.
+        An additional boolean parameter ADD specifies whether FUNC will
+        be called additionally to the other bound function or whether
+        it will replace the previous function. See bind for the return value."""
+        return self._root()._bind(('bind', 'all'), sequence, func, add, True)
+
+    def unbind_all(self, sequence):
+        """Unbind for all widgets for event SEQUENCE all functions."""
+        self._root()._unbind(('bind', 'all', sequence))
+
+    def bind_class(self, className, sequence=None, func=None, add=None):
+        """Bind to widgets with bindtag CLASSNAME at event
+        SEQUENCE a call of function FUNC. An additional
+        boolean parameter ADD specifies whether FUNC will be
+        called additionally to the other bound function or
+        whether it will replace the previous function. See bind for
+        the return value."""
+
+        return self._root()._bind(('bind', className), sequence, func, add, True)
+
+    def unbind_class(self, className, sequence):
+        """Unbind for all widgets with bindtag CLASSNAME for event SEQUENCE
+        all functions."""
+        self._root()._unbind(('bind', className, sequence))
+
+    def mainloop(self, n=0):
+        """Call the mainloop of Tk."""
+        self.tk.mainloop(n)
+
+    def quit(self):
+        """Quit the Tcl interpreter. All widgets will be destroyed."""
+        self.tk.quit()
+
+    def _getints(self, string):
+        """Internal function."""
+        if string:
+            return tuple(map(self.tk.getint, self.tk.splitlist(string)))
+
+    def _getdoubles(self, string):
+        """Internal function."""
+        if string:
+            return tuple(map(self.tk.getdouble, self.tk.splitlist(string)))
+
+    def _getboolean(self, string):
+        """Internal function."""
+        if string:
+            return self.tk.getboolean(string)
+
+    def _displayof(self, displayof):
+        """Internal function."""
+        if displayof:
+            return ('-displayof', displayof)
+        if displayof is None:
+            return ('-displayof', self._w)
+        return ()
+
+    @property
+    def _windowingsystem(self):
+        """Internal function."""
+        try:
+            return self._root()._windowingsystem_cached
+        except AttributeError:
+            ws = self._root()._windowingsystem_cached = \
+                        self.tk.call('tk', 'windowingsystem')
+            return ws
+
+    def _options(self, cnf, kw = None):
+        """Internal function."""
+        if kw:
+            cnf = _cnfmerge((cnf, kw))
+        else:
+            cnf = _cnfmerge(cnf)
+        res = ()
+        for k, v in cnf.items():
+            if v is not None:
+                if k[-1] == '_': k = k[:-1]
+                if callable(v):
+                    v = self._register(v)
+                elif isinstance(v, (tuple, list)):
+                    nv = []
+                    for item in v:
+                        if isinstance(item, int):
+                            nv.append(str(item))
+                        elif isinstance(item, str):
+                            nv.append(_stringify(item))
+                        else:
+                            break
+                    else:
+                        v = ' '.join(nv)
+                res = res + ('-'+k, v)
+        return res
+
+    def nametowidget(self, name):
+        """Return the Tkinter instance of a widget identified by
+        its Tcl name NAME."""
+        name = str(name).split('.')
+        w = self
+
+        if not name[0]:
+            w = w._root()
+            name = name[1:]
+
+        for n in name:
+            if not n:
+                break
+            w = w.children[n]
+
+        return w
+
+    _nametowidget = nametowidget
+
+    def _register(self, func, subst=None, needcleanup=1):
+        """Return a newly created Tcl function. If this
+        function is called, the Python function FUNC will
+        be executed. An optional function SUBST can
+        be given which will be executed before FUNC."""
+        f = CallWrapper(func, subst, self).__call__
+        name = repr(id(f))
+        try:
+            func = func.__func__
+        except AttributeError:
+            pass
+        try:
+            name = name + func.__name__
+        except AttributeError:
+            pass
+        self.tk.createcommand(name, f)
+        if needcleanup:
+            if self._tclCommands is None:
+                self._tclCommands = []
+            self._tclCommands.append(name)
+        return name
+
+    register = _register
+
+    def _root(self):
+        """Internal function."""
+        w = self
+        while w.master is not None: w = w.master
+        return w
+    _subst_format = ('%#', '%b', '%f', '%h', '%k',
+             '%s', '%t', '%w', '%x', '%y',
+             '%A', '%E', '%K', '%N', '%W', '%T', '%X', '%Y', '%D')
+    _subst_format_str = " ".join(_subst_format)
+
+    def _substitute(self, *args):
+        """Internal function."""
+        if len(args) != len(self._subst_format): return args
+        getboolean = self.tk.getboolean
+
+        getint = self.tk.getint
+        def getint_event(s):
+            """Tk changed behavior in 8.4.2, returning "??" rather more often."""
+            try:
+                return getint(s)
+            except (ValueError, TclError):
+                return s
+
+        if any(isinstance(s, tuple) for s in args):
+            args = [s[0] if isinstance(s, tuple) and len(s) == 1 else s
+                    for s in args]
+        nsign, b, f, h, k, s, t, w, x, y, A, E, K, N, W, T, X, Y, D = args
+        # Missing: (a, c, d, m, o, v, B, R)
+        e = Event()
+        # serial field: valid for all events
+        # number of button: ButtonPress and ButtonRelease events only
+        # height field: Configure, ConfigureRequest, Create,
+        # ResizeRequest, and Expose events only
+        # keycode field: KeyPress and KeyRelease events only
+        # time field: "valid for events that contain a time field"
+        # width field: Configure, ConfigureRequest, Create, ResizeRequest,
+        # and Expose events only
+        # x field: "valid for events that contain an x field"
+        # y field: "valid for events that contain a y field"
+        # keysym as decimal: KeyPress and KeyRelease events only
+        # x_root, y_root fields: ButtonPress, ButtonRelease, KeyPress,
+        # KeyRelease, and Motion events
+        e.serial = getint(nsign)
+        e.num = getint_event(b)
+        try: e.focus = getboolean(f)
+        except TclError: pass
+        e.height = getint_event(h)
+        e.keycode = getint_event(k)
+        e.state = getint_event(s)
+        e.time = getint_event(t)
+        e.width = getint_event(w)
+        e.x = getint_event(x)
+        e.y = getint_event(y)
+        e.char = A
+        try: e.send_event = getboolean(E)
+        except TclError: pass
+        e.keysym = K
+        e.keysym_num = getint_event(N)
+        try:
+            e.type = EventType(T)
+        except ValueError:
+            try:
+                e.type = EventType(str(T))  # can be int
+            except ValueError:
+                e.type = T
+        try:
+            e.widget = self._nametowidget(W)
+        except KeyError:
+            e.widget = W
+        e.x_root = getint_event(X)
+        e.y_root = getint_event(Y)
+        try:
+            e.delta = getint(D)
+        except (ValueError, TclError):
+            e.delta = 0
+        return (e,)
+
+    def _report_exception(self):
+        """Internal function."""
+        exc, val, tb = sys.exc_info()
+        root = self._root()
+        root.report_callback_exception(exc, val, tb)
+
+    def _getconfigure(self, *args):
+        """Call Tcl configure command and return the result as a dict."""
+        cnf = {}
+        for x in self.tk.splitlist(self.tk.call(*args)):
+            x = self.tk.splitlist(x)
+            cnf[x[0][1:]] = (x[0][1:],) + x[1:]
+        return cnf
+
+    def _getconfigure1(self, *args):
+        x = self.tk.splitlist(self.tk.call(*args))
+        return (x[0][1:],) + x[1:]
+
+    def _configure(self, cmd, cnf, kw):
+        """Internal function."""
+        if kw:
+            cnf = _cnfmerge((cnf, kw))
+        elif cnf:
+            cnf = _cnfmerge(cnf)
+        if cnf is None:
+            return self._getconfigure(_flatten((self._w, cmd)))
+        if isinstance(cnf, str):
+            return self._getconfigure1(_flatten((self._w, cmd, '-'+cnf)))
+        self.tk.call(_flatten((self._w, cmd)) + self._options(cnf))
+    # These used to be defined in Widget:
+
+    def configure(self, cnf=None, **kw):
+        """Query or modify the configuration options of the widget.
+
+        If no arguments are specified, return a dictionary describing
+        all of the available options for the widget.
+
+        If an option name is specified, then return a tuple describing
+        the one named option.
+
+        If one or more keyword arguments are specified or a dictionary
+        is specified, then modify the widget option(s) to have the given
+        value(s).
+        """
+        return self._configure('configure', cnf, kw)
+
+    config = configure
+
+    def cget(self, key):
+        """Return the current value of the configuration option."""
+        return self.tk.call(self._w, 'cget', '-' + key)
+
+    __getitem__ = cget
+
+    def __setitem__(self, key, value):
+        self.configure({key: value})
+
+    def keys(self):
+        """Return a list of all option names of this widget."""
+        splitlist = self.tk.splitlist
+        return [splitlist(x)[0][1:] for x in
+                splitlist(self.tk.call(self._w, 'configure'))]
+
+    def __str__(self):
+        """Return the window path name of this widget."""
+        return self._w
+
+    def __repr__(self):
+        return '<%s.%s object %s>' % (
+            self.__class__.__module__, self.__class__.__qualname__, self._w)
+
+    # Pack methods that apply to the container widget
+    _noarg_ = ['_noarg_']
+
+    def pack_propagate(self, flag=_noarg_):
+        """Set or get the status for propagation of geometry information.
+
+        A boolean argument specifies whether the size of this container will
+        be determined by the geometry information of its content.
+        If no argument is given the current setting will be returned.
+        """
+        if flag is Misc._noarg_:
+            return self._getboolean(self.tk.call(
+                'pack', 'propagate', self._w))
+        else:
+            self.tk.call('pack', 'propagate', self._w, flag)
+
+    propagate = pack_propagate
+
+    def pack_slaves(self):
+        """Returns a list of all of the content widgets in the packing order
+        for this container."""
+        return [self._nametowidget(x) for x in
+                self.tk.splitlist(
+                   self.tk.call('pack', 'slaves', self._w))]
+
+    slaves = pack_slaves
+
+    # Place method that applies to the container widget
+    def place_slaves(self):
+        """Returns a list of all the content widgets for which this widget is
+        the container."""
+        return [self._nametowidget(x) for x in
+                self.tk.splitlist(
+                   self.tk.call(
+                       'place', 'slaves', self._w))]
+
+    # Grid methods that apply to the container widget
+
+    def grid_anchor(self, anchor=None): # new in Tk 8.5
+        """The anchor value controls how to place the grid within the
+        container widget when no row/column has any weight.
+
+        The default anchor is nw."""
+        self.tk.call('grid', 'anchor', self._w, anchor)
+
+    anchor = grid_anchor
+
+    def grid_bbox(self, column=None, row=None, col2=None, row2=None):
+        """Return a tuple of integer coordinates for the bounding
+        box of this widget controlled by the geometry manager grid.
+
+        If COLUMN, ROW is given the bounding box applies from
+        the cell with row and column 0 to the specified
+        cell. If COL2 and ROW2 are given the bounding box
+        starts at that cell.
+
+        The returned integers specify the offset of the upper left
+        corner in the container widget and the width and height.
+        """
+        args = ('grid', 'bbox', self._w)
+        if column is not None and row is not None:
+            args = args + (column, row)
+        if col2 is not None and row2 is not None:
+            args = args + (col2, row2)
+        return self._getints(self.tk.call(*args)) or None
+
+    bbox = grid_bbox
+
+    def _gridconvvalue(self, value):
+        if isinstance(value, (str, _tkinter.Tcl_Obj)):
+            try:
+                svalue = str(value)
+                if not svalue:
+                    return None
+                elif '.' in svalue:
+                    return self.tk.getdouble(svalue)
+                else:
+                    return self.tk.getint(svalue)
+            except (ValueError, TclError):
+                pass
+        return value
+
+    def _grid_configure(self, command, index, cnf, kw):
+        """Internal function."""
+        if isinstance(cnf, str) and not kw:
+            if cnf[-1:] == '_':
+                cnf = cnf[:-1]
+            if cnf[:1] != '-':
+                cnf = '-'+cnf
+            options = (cnf,)
+        else:
+            options = self._options(cnf, kw)
+        if not options:
+            return _splitdict(
+                self.tk,
+                self.tk.call('grid', command, self._w, index),
+                conv=self._gridconvvalue)
+        res = self.tk.call(
+                  ('grid', command, self._w, index)
+                  + options)
+        if len(options) == 1:
+            return self._gridconvvalue(res)
+
+    def grid_columnconfigure(self, index, cnf={}, **kw):
+        """Configure column INDEX of a grid.
+
+        Valid options are minsize (minimum size of the column),
+        weight (how much does additional space propagate to this column)
+        and pad (how much space to let additionally)."""
+        return self._grid_configure('columnconfigure', index, cnf, kw)
+
+    columnconfigure = grid_columnconfigure
+
+    def grid_location(self, x, y):
+        """Return a tuple of column and row which identify the cell
+        at which the pixel at position X and Y inside the container
+        widget is located."""
+        return self._getints(
+            self.tk.call(
+                'grid', 'location', self._w, x, y)) or None
+
+    def grid_propagate(self, flag=_noarg_):
+        """Set or get the status for propagation of geometry information.
+
+        A boolean argument specifies whether the size of this container will
+        be determined by the geometry information of its content.
+        If no argument is given the current setting will be returned.
+        """
+        if flag is Misc._noarg_:
+            return self._getboolean(self.tk.call(
+                'grid', 'propagate', self._w))
+        else:
+            self.tk.call('grid', 'propagate', self._w, flag)
+
+    def grid_rowconfigure(self, index, cnf={}, **kw):
+        """Configure row INDEX of a grid.
+
+        Valid options are minsize (minimum size of the row),
+        weight (how much does additional space propagate to this row)
+        and pad (how much space to let additionally)."""
+        return self._grid_configure('rowconfigure', index, cnf, kw)
+
+    rowconfigure = grid_rowconfigure
+
+    def grid_size(self):
+        """Return a tuple of the number of column and rows in the grid."""
+        return self._getints(
+            self.tk.call('grid', 'size', self._w)) or None
+
+    size = grid_size
+
+    def grid_slaves(self, row=None, column=None):
+        """Returns a list of the content widgets.
+
+        If no arguments are supplied, a list of all of the content in this
+        container widget is returned, most recently managed first.
+        If ROW or COLUMN is specified, only the content in the row or
+        column is returned.
+        """
+        args = ()
+        if row is not None:
+            args = args + ('-row', row)
+        if column is not None:
+            args = args + ('-column', column)
+        return [self._nametowidget(x) for x in
+                self.tk.splitlist(self.tk.call(
+                   ('grid', 'slaves', self._w) + args))]
+
+    # Support for the "event" command, new in Tk 4.2.
+    # By Case Roole.
+
+    def event_add(self, virtual, *sequences):
+        """Bind a virtual event VIRTUAL (of the form <<Name>>)
+        to an event SEQUENCE such that the virtual event is triggered
+        whenever SEQUENCE occurs."""
+        args = ('event', 'add', virtual) + sequences
+        self.tk.call(args)
+
+    def event_delete(self, virtual, *sequences):
+        """Unbind a virtual event VIRTUAL from SEQUENCE."""
+        args = ('event', 'delete', virtual) + sequences
+        self.tk.call(args)
+
+    def event_generate(self, sequence, **kw):
+        """Generate an event SEQUENCE. Additional
+        keyword arguments specify parameter of the event
+        (e.g. x, y, rootx, rooty)."""
+        args = ('event', 'generate', self._w, sequence)
+        for k, v in kw.items():
+            args = args + ('-%s' % k, str(v))
+        self.tk.call(args)
+
+    def event_info(self, virtual=None):
+        """Return a list of all virtual events or the information
+        about the SEQUENCE bound to the virtual event VIRTUAL."""
+        return self.tk.splitlist(
+            self.tk.call('event', 'info', virtual))
+
+    # Image related commands
+
+    def image_names(self):
+        """Return a list of all existing image names."""
+        return self.tk.splitlist(self.tk.call('image', 'names'))
+
+    def image_types(self):
+        """Return a list of all available image types (e.g. photo bitmap)."""
+        return self.tk.splitlist(self.tk.call('image', 'types'))
+
+
+class CallWrapper:
+    """Internal class. Stores function to call when some user
+    defined Tcl function is called e.g. after an event occurred."""
+
+    def __init__(self, func, subst, widget):
+        """Store FUNC, SUBST and WIDGET as members."""
+        self.func = func
+        self.subst = subst
+        self.widget = widget
+
+    def __call__(self, *args):
+        """Apply first function SUBST to arguments, than FUNC."""
+        try:
+            if self.subst:
+                args = self.subst(*args)
+            return self.func(*args)
+        except SystemExit:
+            raise
+        except:
+            self.widget._report_exception()
+
+
+class XView:
+    """Mix-in class for querying and changing the horizontal position
+    of a widget's window."""
+
+    def xview(self, *args):
+        """Query and change the horizontal position of the view."""
+        res = self.tk.call(self._w, 'xview', *args)
+        if not args:
+            return self._getdoubles(res)
+
+    def xview_moveto(self, fraction):
+        """Adjusts the view in the window so that FRACTION of the
+        total width of the canvas is off-screen to the left."""
+        self.tk.call(self._w, 'xview', 'moveto', fraction)
+
+    def xview_scroll(self, number, what):
+        """Shift the x-view according to NUMBER which is measured in "units"
+        or "pages" (WHAT)."""
+        self.tk.call(self._w, 'xview', 'scroll', number, what)
+
+
+class YView:
+    """Mix-in class for querying and changing the vertical position
+    of a widget's window."""
+
+    def yview(self, *args):
+        """Query and change the vertical position of the view."""
+        res = self.tk.call(self._w, 'yview', *args)
+        if not args:
+            return self._getdoubles(res)
+
+    def yview_moveto(self, fraction):
+        """Adjusts the view in the window so that FRACTION of the
+        total height of the canvas is off-screen to the top."""
+        self.tk.call(self._w, 'yview', 'moveto', fraction)
+
+    def yview_scroll(self, number, what):
+        """Shift the y-view according to NUMBER which is measured in
+        "units" or "pages" (WHAT)."""
+        self.tk.call(self._w, 'yview', 'scroll', number, what)
+
+
+class Wm:
+    """Provides functions for the communication with the window manager."""
+
+    def wm_aspect(self,
+              minNumer=None, minDenom=None,
+              maxNumer=None, maxDenom=None):
+        """Instruct the window manager to set the aspect ratio (width/height)
+        of this widget to be between MINNUMER/MINDENOM and MAXNUMER/MAXDENOM. Return a tuple
+        of the actual values if no argument is given."""
+        return self._getints(
+            self.tk.call('wm', 'aspect', self._w,
+                     minNumer, minDenom,
+                     maxNumer, maxDenom))
+
+    aspect = wm_aspect
+
+    def wm_attributes(self, *args, return_python_dict=False, **kwargs):
+        """Return or sets platform specific attributes.
+
+        When called with a single argument return_python_dict=True,
+        return a dict of the platform specific attributes and their values.
+        When called without arguments or with a single argument
+        return_python_dict=False, return a tuple containing intermixed
+        attribute names with the minus prefix and their values.
+
+        When called with a single string value, return the value for the
+        specific option.  When called with keyword arguments, set the
+        corresponding attributes.
+        """
+        if not kwargs:
+            if not args:
+                res = self.tk.call('wm', 'attributes', self._w)
+                if return_python_dict:
+                    return _splitdict(self.tk, res)
+                else:
+                    return self.tk.splitlist(res)
+            if len(args) == 1 and args[0] is not None:
+                option = args[0]
+                if option[0] == '-':
+                    # TODO: deprecate
+                    option = option[1:]
+                return self.tk.call('wm', 'attributes', self._w, '-' + option)
+            # TODO: deprecate
+            return self.tk.call('wm', 'attributes', self._w, *args)
+        elif args:
+            raise TypeError('wm_attribute() options have been specified as '
+                            'positional and keyword arguments')
+        else:
+            self.tk.call('wm', 'attributes', self._w, *self._options(kwargs))
+
+    attributes = wm_attributes
+
+    def wm_client(self, name=None):
+        """Store NAME in WM_CLIENT_MACHINE property of this widget. Return
+        current value."""
+        return self.tk.call('wm', 'client', self._w, name)
+
+    client = wm_client
+
+    def wm_colormapwindows(self, *wlist):
+        """Store list of window names (WLIST) into WM_COLORMAPWINDOWS property
+        of this widget. This list contains windows whose colormaps differ from their
+        parents. Return current list of widgets if WLIST is empty."""
+        if len(wlist) > 1:
+            wlist = (wlist,) # Tk needs a list of windows here
+        args = ('wm', 'colormapwindows', self._w) + wlist
+        if wlist:
+            self.tk.call(args)
+        else:
+            return [self._nametowidget(x)
+                    for x in self.tk.splitlist(self.tk.call(args))]
+
+    colormapwindows = wm_colormapwindows
+
+    def wm_command(self, value=None):
+        """Store VALUE in WM_COMMAND property. It is the command
+        which shall be used to invoke the application. Return current
+        command if VALUE is None."""
+        return self.tk.call('wm', 'command', self._w, value)
+
+    command = wm_command
+
+    def wm_deiconify(self):
+        """Deiconify this widget. If it was never mapped it will not be mapped.
+        On Windows it will raise this widget and give it the focus."""
+        return self.tk.call('wm', 'deiconify', self._w)
+
+    deiconify = wm_deiconify
+
+    def wm_focusmodel(self, model=None):
+        """Set focus model to MODEL. "active" means that this widget will claim
+        the focus itself, "passive" means that the window manager shall give
+        the focus. Return current focus model if MODEL is None."""
+        return self.tk.call('wm', 'focusmodel', self._w, model)
+
+    focusmodel = wm_focusmodel
+
+    def wm_forget(self, window): # new in Tk 8.5
+        """The window will be unmapped from the screen and will no longer
+        be managed by wm. toplevel windows will be treated like frame
+        windows once they are no longer managed by wm, however, the menu
+        option configuration will be remembered and the menus will return
+        once the widget is managed again."""
+        self.tk.call('wm', 'forget', window)
+
+    forget = wm_forget
+
+    def wm_frame(self):
+        """Return identifier for decorative frame of this widget if present."""
+        return self.tk.call('wm', 'frame', self._w)
+
+    frame = wm_frame
+
+    def wm_geometry(self, newGeometry=None):
+        """Set geometry to NEWGEOMETRY of the form =widthxheight+x+y. Return
+        current value if None is given."""
+        return self.tk.call('wm', 'geometry', self._w, newGeometry)
+
+    geometry = wm_geometry
+
+    def wm_grid(self,
+         baseWidth=None, baseHeight=None,
+         widthInc=None, heightInc=None):
+        """Instruct the window manager that this widget shall only be
+        resized on grid boundaries. WIDTHINC and HEIGHTINC are the width and
+        height of a grid unit in pixels. BASEWIDTH and BASEHEIGHT are the
+        number of grid units requested in Tk_GeometryRequest."""
+        return self._getints(self.tk.call(
+            'wm', 'grid', self._w,
+            baseWidth, baseHeight, widthInc, heightInc))
+
+    grid = wm_grid
+
+    def wm_group(self, pathName=None):
+        """Set the group leader widgets for related widgets to PATHNAME. Return
+        the group leader of this widget if None is given."""
+        return self.tk.call('wm', 'group', self._w, pathName)
+
+    group = wm_group
+
+    def wm_iconbitmap(self, bitmap=None, default=None):
+        """Set bitmap for the iconified widget to BITMAP. Return
+        the bitmap if None is given.
+
+        Under Windows, the DEFAULT parameter can be used to set the icon
+        for the widget and any descendants that don't have an icon set
+        explicitly.  DEFAULT can be the relative path to a .ico file
+        (example: root.iconbitmap(default='myicon.ico') ).  See Tk
+        documentation for more information."""
+        if default is not None:
+            return self.tk.call('wm', 'iconbitmap', self._w, '-default', default)
+        else:
+            return self.tk.call('wm', 'iconbitmap', self._w, bitmap)
+
+    iconbitmap = wm_iconbitmap
+
+    def wm_iconify(self):
+        """Display widget as icon."""
+        return self.tk.call('wm', 'iconify', self._w)
+
+    iconify = wm_iconify
+
+    def wm_iconmask(self, bitmap=None):
+        """Set mask for the icon bitmap of this widget. Return the
+        mask if None is given."""
+        return self.tk.call('wm', 'iconmask', self._w, bitmap)
+
+    iconmask = wm_iconmask
+
+    def wm_iconname(self, newName=None):
+        """Set the name of the icon for this widget. Return the name if
+        None is given."""
+        return self.tk.call('wm', 'iconname', self._w, newName)
+
+    iconname = wm_iconname
+
+    def wm_iconphoto(self, default=False, *args): # new in Tk 8.5
+        """Sets the titlebar icon for this window based on the named photo
+        images passed through args. If default is True, this is applied to
+        all future created toplevels as well.
+
+        The data in the images is taken as a snapshot at the time of
+        invocation. If the images are later changed, this is not reflected
+        to the titlebar icons. Multiple images are accepted to allow
+        different images sizes to be provided. The window manager may scale
+        provided icons to an appropriate size.
+
+        On Windows, the images are packed into a Windows icon structure.
+        This will override an icon specified to wm_iconbitmap, and vice
+        versa.
+
+        On X, the images are arranged into the _NET_WM_ICON X property,
+        which most modern window managers support. An icon specified by
+        wm_iconbitmap may exist simultaneously.
+
+        On Macintosh, this currently does nothing."""
+        if default:
+            self.tk.call('wm', 'iconphoto', self._w, "-default", *args)
+        else:
+            self.tk.call('wm', 'iconphoto', self._w, *args)
+
+    iconphoto = wm_iconphoto
+
+    def wm_iconposition(self, x=None, y=None):
+        """Set the position of the icon of this widget to X and Y. Return
+        a tuple of the current values of X and X if None is given."""
+        return self._getints(self.tk.call(
+            'wm', 'iconposition', self._w, x, y))
+
+    iconposition = wm_iconposition
+
+    def wm_iconwindow(self, pathName=None):
+        """Set widget PATHNAME to be displayed instead of icon. Return the current
+        value if None is given."""
+        return self.tk.call('wm', 'iconwindow', self._w, pathName)
+
+    iconwindow = wm_iconwindow
+
+    def wm_manage(self, widget): # new in Tk 8.5
+        """The widget specified will become a stand alone top-level window.
+        The window will be decorated with the window managers title bar,
+        etc."""
+        self.tk.call('wm', 'manage', widget)
+
+    manage = wm_manage
+
+    def wm_maxsize(self, width=None, height=None):
+        """Set max WIDTH and HEIGHT for this widget. If the window is gridded
+        the values are given in grid units. Return the current values if None
+        is given."""
+        return self._getints(self.tk.call(
+            'wm', 'maxsize', self._w, width, height))
+
+    maxsize = wm_maxsize
+
+    def wm_minsize(self, width=None, height=None):
+        """Set min WIDTH and HEIGHT for this widget. If the window is gridded
+        the values are given in grid units. Return the current values if None
+        is given."""
+        return self._getints(self.tk.call(
+            'wm', 'minsize', self._w, width, height))
+
+    minsize = wm_minsize
+
+    def wm_overrideredirect(self, boolean=None):
+        """Instruct the window manager to ignore this widget
+        if BOOLEAN is given with 1. Return the current value if None
+        is given."""
+        return self._getboolean(self.tk.call(
+            'wm', 'overrideredirect', self._w, boolean))
+
+    overrideredirect = wm_overrideredirect
+
+    def wm_positionfrom(self, who=None):
+        """Instruct the window manager that the position of this widget shall
+        be defined by the user if WHO is "user", and by its own policy if WHO is
+        "program"."""
+        return self.tk.call('wm', 'positionfrom', self._w, who)
+
+    positionfrom = wm_positionfrom
+
+    def wm_protocol(self, name=None, func=None):
+        """Bind function FUNC to command NAME for this widget.
+        Return the function bound to NAME if None is given. NAME could be
+        e.g. "WM_SAVE_YOURSELF" or "WM_DELETE_WINDOW"."""
+        if callable(func):
+            command = self._register(func)
+        else:
+            command = func
+        return self.tk.call(
+            'wm', 'protocol', self._w, name, command)
+
+    protocol = wm_protocol
+
+    def wm_resizable(self, width=None, height=None):
+        """Instruct the window manager whether this width can be resized
+        in WIDTH or HEIGHT. Both values are boolean values."""
+        return self.tk.call('wm', 'resizable', self._w, width, height)
+
+    resizable = wm_resizable
+
+    def wm_sizefrom(self, who=None):
+        """Instruct the window manager that the size of this widget shall
+        be defined by the user if WHO is "user", and by its own policy if WHO is
+        "program"."""
+        return self.tk.call('wm', 'sizefrom', self._w, who)
+
+    sizefrom = wm_sizefrom
+
+    def wm_state(self, newstate=None):
+        """Query or set the state of this widget as one of normal, icon,
+        iconic (see wm_iconwindow), withdrawn, or zoomed (Windows only)."""
+        return self.tk.call('wm', 'state', self._w, newstate)
+
+    state = wm_state
+
+    def wm_title(self, string=None):
+        """Set the title of this widget."""
+        return self.tk.call('wm', 'title', self._w, string)
+
+    title = wm_title
+
+    def wm_transient(self, master=None):
+        """Instruct the window manager that this widget is transient
+        with regard to widget MASTER."""
+        return self.tk.call('wm', 'transient', self._w, master)
+
+    transient = wm_transient
+
+    def wm_withdraw(self):
+        """Withdraw this widget from the screen such that it is unmapped
+        and forgotten by the window manager. Re-draw it with wm_deiconify."""
+        return self.tk.call('wm', 'withdraw', self._w)
+
+    withdraw = wm_withdraw
+
+
+class Tk(Misc, Wm):
+    """Toplevel widget of Tk which represents mostly the main window
+    of an application. It has an associated Tcl interpreter."""
+    _w = '.'
+
+    def __init__(self, screenName=None, baseName=None, className='Tk',
+                 useTk=True, sync=False, use=None):
+        """Return a new top level widget on screen SCREENNAME. A new Tcl interpreter will
+        be created. BASENAME will be used for the identification of the profile file (see
+        readprofile).
+        It is constructed from sys.argv[0] without extensions if None is given. CLASSNAME
+        is the name of the widget class."""
+        self.master = None
+        self.children = {}
+        self._tkloaded = False
+        # to avoid recursions in the getattr code in case of failure, we
+        # ensure that self.tk is always _something_.
+        self.tk = None
+        if baseName is None:
+            import os
+            baseName = os.path.basename(sys.argv[0])
+            baseName, ext = os.path.splitext(baseName)
+            if ext not in ('.py', '.pyc'):
+                baseName = baseName + ext
+        interactive = False
+        self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use)
+        if _debug:
+            self.tk.settrace(_print_command)
+        if useTk:
+            self._loadtk()
+        if not sys.flags.ignore_environment:
+            # Issue #16248: Honor the -E flag to avoid code injection.
+            self.readprofile(baseName, className)
+
+    def loadtk(self):
+        if not self._tkloaded:
+            self.tk.loadtk()
+            self._loadtk()
+
+    def _loadtk(self):
+        self._tkloaded = True
+        global _default_root
+        # Version sanity checks
+        tk_version = self.tk.getvar('tk_version')
+        if tk_version != _tkinter.TK_VERSION:
+            raise RuntimeError("tk.h version (%s) doesn't match libtk.a version (%s)"
+                               % (_tkinter.TK_VERSION, tk_version))
+        # Under unknown circumstances, tcl_version gets coerced to float
+        tcl_version = str(self.tk.getvar('tcl_version'))
+        if tcl_version != _tkinter.TCL_VERSION:
+            raise RuntimeError("tcl.h version (%s) doesn't match libtcl.a version (%s)" \
+                               % (_tkinter.TCL_VERSION, tcl_version))
+        # Create and register the tkerror and exit commands
+        # We need to inline parts of _register here, _ register
+        # would register differently-named commands.
+        if self._tclCommands is None:
+            self._tclCommands = []
+        self.tk.createcommand('tkerror', _tkerror)
+        self.tk.createcommand('exit', _exit)
+        self._tclCommands.append('tkerror')
+        self._tclCommands.append('exit')
+        if _support_default_root and _default_root is None:
+            _default_root = self
+        self.protocol("WM_DELETE_WINDOW", self.destroy)
+
+    def destroy(self):
+        """Destroy this and all descendants widgets. This will
+        end the application of this Tcl interpreter."""
+        for c in list(self.children.values()): c.destroy()
+        self.tk.call('destroy', self._w)
+        Misc.destroy(self)
+        global _default_root
+        if _support_default_root and _default_root is self:
+            _default_root = None
+
+    def readprofile(self, baseName, className):
+        """Internal function. It reads .BASENAME.tcl and .CLASSNAME.tcl into
+        the Tcl Interpreter and calls exec on the contents of .BASENAME.py and
+        .CLASSNAME.py if such a file exists in the home directory."""
+        import os
+        if 'HOME' in os.environ: home = os.environ['HOME']
+        else: home = os.curdir
+        class_tcl = os.path.join(home, '.%s.tcl' % className)
+        class_py = os.path.join(home, '.%s.py' % className)
+        base_tcl = os.path.join(home, '.%s.tcl' % baseName)
+        base_py = os.path.join(home, '.%s.py' % baseName)
+        dir = {'self': self}
+        exec('from tkinter import *', dir)
+        if os.path.isfile(class_tcl):
+            self.tk.call('source', class_tcl)
+        if os.path.isfile(class_py):
+            exec(open(class_py).read(), dir)
+        if os.path.isfile(base_tcl):
+            self.tk.call('source', base_tcl)
+        if os.path.isfile(base_py):
+            exec(open(base_py).read(), dir)
+
+    def report_callback_exception(self, exc, val, tb):
+        """Report callback exception on sys.stderr.
+
+        Applications may want to override this internal function, and
+        should when sys.stderr is None."""
+        import traceback
+        print("Exception in Tkinter callback", file=sys.stderr)
+        sys.last_exc = val
+        sys.last_type = exc
+        sys.last_value = val
+        sys.last_traceback = tb
+        traceback.print_exception(exc, val, tb)
+
+    def __getattr__(self, attr):
+        "Delegate attribute access to the interpreter object"
+        return getattr(self.tk, attr)
+
+
+def _print_command(cmd, *, file=sys.stderr):
+    # Print executed Tcl/Tk commands.
+    assert isinstance(cmd, tuple)
+    cmd = _join(cmd)
+    print(cmd, file=file)
+
+
+# Ideally, the classes Pack, Place and Grid disappear, the
+# pack/place/grid methods are defined on the Widget class, and
+# everybody uses w.pack_whatever(...) instead of Pack.whatever(w,
+# ...), with pack(), place() and grid() being short for
+# pack_configure(), place_configure() and grid_columnconfigure(), and
+# forget() being short for pack_forget().  As a practical matter, I'm
+# afraid that there is too much code out there that may be using the
+# Pack, Place or Grid class, so I leave them intact -- but only as
+# backwards compatibility features.  Also note that those methods that
+# take a master as argument (e.g. pack_propagate) have been moved to
+# the Misc class (which now incorporates all methods common between
+# toplevel and interior widgets).  Again, for compatibility, these are
+# copied into the Pack, Place or Grid class.
+
+
+def Tcl(screenName=None, baseName=None, className='Tk', useTk=False):
+    return Tk(screenName, baseName, className, useTk)
+
+
+class Pack:
+    """Geometry manager Pack.
+
+    Base class to use the methods pack_* in every widget."""
+
+    def pack_configure(self, cnf={}, **kw):
+        """Pack a widget in the parent widget. Use as options:
+        after=widget - pack it after you have packed widget
+        anchor=NSEW (or subset) - position widget according to
+                                  given direction
+        before=widget - pack it before you will pack widget
+        expand=bool - expand widget if parent size grows
+        fill=NONE or X or Y or BOTH - fill widget if widget grows
+        in=container - use the container widget to contain this widget
+        in_=container - see 'in' option description
+        ipadx=amount - add internal padding in x direction
+        ipady=amount - add internal padding in y direction
+        padx=amount - add padding in x direction
+        pady=amount - add padding in y direction
+        side=TOP or BOTTOM or LEFT or RIGHT -  where to add this widget.
+        """
+        self.tk.call(
+              ('pack', 'configure', self._w)
+              + self._options(cnf, kw))
+
+    pack = configure = config = pack_configure
+
+    def pack_forget(self):
+        """Unmap this widget and do not use it for the packing order."""
+        self.tk.call('pack', 'forget', self._w)
+
+    forget = pack_forget
+
+    def pack_info(self):
+        """Return information about the packing options
+        for this widget."""
+        d = _splitdict(self.tk, self.tk.call('pack', 'info', self._w))
+        if 'in' in d:
+            d['in'] = self.nametowidget(d['in'])
+        return d
+
+    info = pack_info
+    propagate = pack_propagate = Misc.pack_propagate
+    slaves = pack_slaves = Misc.pack_slaves
+
+
+class Place:
+    """Geometry manager Place.
+
+    Base class to use the methods place_* in every widget."""
+
+    def place_configure(self, cnf={}, **kw):
+        """Place a widget in the parent widget. Use as options:
+        in=container - the container widget relative to which this widget is
+                       placed
+        in_=container - see 'in' option description
+        x=amount - locate anchor of this widget at position x of the
+                   container widget
+        y=amount - locate anchor of this widget at position y of the
+                   container widget
+        relx=amount - locate anchor of this widget between 0.0 and 1.0
+                      relative to width of the container widget (1.0 is
+                       right edge)
+        rely=amount - locate anchor of this widget between 0.0 and 1.0
+                      relative to height of the container widget (1.0 is
+                      bottom edge)
+        anchor=NSEW (or subset) - position anchor according to given
+                                  direction
+        width=amount - width of this widget in pixel
+        height=amount - height of this widget in pixel
+        relwidth=amount - width of this widget between 0.0 and 1.0
+                          relative to width of the container widget (1.0 is
+                          the same width as the container widget)
+        relheight=amount - height of this widget between 0.0 and 1.0
+                           relative to height of the container widget (1.0
+                           is the same height as the container widget)
+        bordermode="inside" or "outside" - whether to take border width of
+                                           the container widget into account
+        """
+        self.tk.call(
+              ('place', 'configure', self._w)
+              + self._options(cnf, kw))
+
+    place = configure = config = place_configure
+
+    def place_forget(self):
+        """Unmap this widget."""
+        self.tk.call('place', 'forget', self._w)
+
+    forget = place_forget
+
+    def place_info(self):
+        """Return information about the placing options
+        for this widget."""
+        d = _splitdict(self.tk, self.tk.call('place', 'info', self._w))
+        if 'in' in d:
+            d['in'] = self.nametowidget(d['in'])
+        return d
+
+    info = place_info
+    slaves = place_slaves = Misc.place_slaves
+
+
+class Grid:
+    """Geometry manager Grid.
+
+    Base class to use the methods grid_* in every widget."""
+    # Thanks to Masazumi Yoshikawa (yosikawa@isi.edu)
+
+    def grid_configure(self, cnf={}, **kw):
+        """Position a widget in the parent widget in a grid. Use as options:
+        column=number - use cell identified with given column (starting with 0)
+        columnspan=number - this widget will span several columns
+        in=container - use the container widget to contain this widget
+        in_=container - see 'in' option description
+        ipadx=amount - add internal padding in x direction
+        ipady=amount - add internal padding in y direction
+        padx=amount - add padding in x direction
+        pady=amount - add padding in y direction
+        row=number - use cell identified with given row (starting with 0)
+        rowspan=number - this widget will span several rows
+        sticky=NSEW - if cell is larger on which sides will this
+                      widget stick to the cell boundary
+        """
+        self.tk.call(
+              ('grid', 'configure', self._w)
+              + self._options(cnf, kw))
+
+    grid = configure = config = grid_configure
+    bbox = grid_bbox = Misc.grid_bbox
+    columnconfigure = grid_columnconfigure = Misc.grid_columnconfigure
+
+    def grid_forget(self):
+        """Unmap this widget."""
+        self.tk.call('grid', 'forget', self._w)
+
+    forget = grid_forget
+
+    def grid_remove(self):
+        """Unmap this widget but remember the grid options."""
+        self.tk.call('grid', 'remove', self._w)
+
+    def grid_info(self):
+        """Return information about the options
+        for positioning this widget in a grid."""
+        d = _splitdict(self.tk, self.tk.call('grid', 'info', self._w))
+        if 'in' in d:
+            d['in'] = self.nametowidget(d['in'])
+        return d
+
+    info = grid_info
+    location = grid_location = Misc.grid_location
+    propagate = grid_propagate = Misc.grid_propagate
+    rowconfigure = grid_rowconfigure = Misc.grid_rowconfigure
+    size = grid_size = Misc.grid_size
+    slaves = grid_slaves = Misc.grid_slaves
+
+
+class BaseWidget(Misc):
+    """Internal class."""
+
+    def _setup(self, master, cnf):
+        """Internal function. Sets up information about children."""
+        if master is None:
+            master = _get_default_root()
+        self.master = master
+        self.tk = master.tk
+        name = None
+        if 'name' in cnf:
+            name = cnf['name']
+            del cnf['name']
+        if not name:
+            name = self.__class__.__name__.lower()
+            if name[-1].isdigit():
+                name += "!"  # Avoid duplication when calculating names below
+            if master._last_child_ids is None:
+                master._last_child_ids = {}
+            count = master._last_child_ids.get(name, 0) + 1
+            master._last_child_ids[name] = count
+            if count == 1:
+                name = '!%s' % (name,)
+            else:
+                name = '!%s%d' % (name, count)
+        self._name = name
+        if master._w=='.':
+            self._w = '.' + name
+        else:
+            self._w = master._w + '.' + name
+        self.children = {}
+        if self._name in self.master.children:
+            self.master.children[self._name].destroy()
+        self.master.children[self._name] = self
+
+    def __init__(self, master, widgetName, cnf={}, kw={}, extra=()):
+        """Construct a widget with the parent widget MASTER, a name WIDGETNAME
+        and appropriate options."""
+        if kw:
+            cnf = _cnfmerge((cnf, kw))
+        self.widgetName = widgetName
+        self._setup(master, cnf)
+        if self._tclCommands is None:
+            self._tclCommands = []
+        classes = [(k, v) for k, v in cnf.items() if isinstance(k, type)]
+        for k, v in classes:
+            del cnf[k]
+        self.tk.call(
+            (widgetName, self._w) + extra + self._options(cnf))
+        for k, v in classes:
+            k.configure(self, v)
+
+    def destroy(self):
+        """Destroy this and all descendants widgets."""
+        for c in list(self.children.values()): c.destroy()
+        self.tk.call('destroy', self._w)
+        if self._name in self.master.children:
+            del self.master.children[self._name]
+        Misc.destroy(self)
+
+    def _do(self, name, args=()):
+        # XXX Obsolete -- better use self.tk.call directly!
+        return self.tk.call((self._w, name) + args)
+
+
+class Widget(BaseWidget, Pack, Place, Grid):
+    """Internal class.
+
+    Base class for a widget which can be positioned with the geometry managers
+    Pack, Place or Grid."""
+    pass
+
+
+class Toplevel(BaseWidget, Wm):
+    """Toplevel widget, e.g. for dialogs."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a toplevel widget with the parent MASTER.
+
+        Valid option names: background, bd, bg, borderwidth, class,
+        colormap, container, cursor, height, highlightbackground,
+        highlightcolor, highlightthickness, menu, relief, screen, takefocus,
+        use, visual, width."""
+        if kw:
+            cnf = _cnfmerge((cnf, kw))
+        extra = ()
+        for wmkey in ['screen', 'class_', 'class', 'visual',
+                  'colormap']:
+            if wmkey in cnf:
+                val = cnf[wmkey]
+                # TBD: a hack needed because some keys
+                # are not valid as keyword arguments
+                if wmkey[-1] == '_': opt = '-'+wmkey[:-1]
+                else: opt = '-'+wmkey
+                extra = extra + (opt, val)
+                del cnf[wmkey]
+        BaseWidget.__init__(self, master, 'toplevel', cnf, {}, extra)
+        root = self._root()
+        self.iconname(root.iconname())
+        self.title(root.title())
+        self.protocol("WM_DELETE_WINDOW", self.destroy)
+
+
+class Button(Widget):
+    """Button widget."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a button widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            activebackground, activeforeground, anchor,
+            background, bitmap, borderwidth, cursor,
+            disabledforeground, font, foreground
+            highlightbackground, highlightcolor,
+            highlightthickness, image, justify,
+            padx, pady, relief, repeatdelay,
+            repeatinterval, takefocus, text,
+            textvariable, underline, wraplength
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, compound, default, height,
+            overrelief, state, width
+        """
+        Widget.__init__(self, master, 'button', cnf, kw)
+
+    def flash(self):
+        """Flash the button.
+
+        This is accomplished by redisplaying
+        the button several times, alternating between active and
+        normal colors. At the end of the flash the button is left
+        in the same normal/active state as when the command was
+        invoked. This command is ignored if the button's state is
+        disabled.
+        """
+        self.tk.call(self._w, 'flash')
+
+    def invoke(self):
+        """Invoke the command associated with the button.
+
+        The return value is the return value from the command,
+        or an empty string if there is no command associated with
+        the button. This command is ignored if the button's state
+        is disabled.
+        """
+        return self.tk.call(self._w, 'invoke')
+
+
+class Canvas(Widget, XView, YView):
+    """Canvas widget to display graphical elements like lines or text."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a canvas widget with the parent MASTER.
+
+        Valid option names: background, bd, bg, borderwidth, closeenough,
+        confine, cursor, height, highlightbackground, highlightcolor,
+        highlightthickness, insertbackground, insertborderwidth,
+        insertofftime, insertontime, insertwidth, offset, relief,
+        scrollregion, selectbackground, selectborderwidth, selectforeground,
+        state, takefocus, width, xscrollcommand, xscrollincrement,
+        yscrollcommand, yscrollincrement."""
+        Widget.__init__(self, master, 'canvas', cnf, kw)
+
+    def addtag(self, *args):
+        """Internal function."""
+        self.tk.call((self._w, 'addtag') + args)
+
+    def addtag_above(self, newtag, tagOrId):
+        """Add tag NEWTAG to all items above TAGORID."""
+        self.addtag(newtag, 'above', tagOrId)
+
+    def addtag_all(self, newtag):
+        """Add tag NEWTAG to all items."""
+        self.addtag(newtag, 'all')
+
+    def addtag_below(self, newtag, tagOrId):
+        """Add tag NEWTAG to all items below TAGORID."""
+        self.addtag(newtag, 'below', tagOrId)
+
+    def addtag_closest(self, newtag, x, y, halo=None, start=None):
+        """Add tag NEWTAG to item which is closest to pixel at X, Y.
+        If several match take the top-most.
+        All items closer than HALO are considered overlapping (all are
+        closest). If START is specified the next below this tag is taken."""
+        self.addtag(newtag, 'closest', x, y, halo, start)
+
+    def addtag_enclosed(self, newtag, x1, y1, x2, y2):
+        """Add tag NEWTAG to all items in the rectangle defined
+        by X1,Y1,X2,Y2."""
+        self.addtag(newtag, 'enclosed', x1, y1, x2, y2)
+
+    def addtag_overlapping(self, newtag, x1, y1, x2, y2):
+        """Add tag NEWTAG to all items which overlap the rectangle
+        defined by X1,Y1,X2,Y2."""
+        self.addtag(newtag, 'overlapping', x1, y1, x2, y2)
+
+    def addtag_withtag(self, newtag, tagOrId):
+        """Add tag NEWTAG to all items with TAGORID."""
+        self.addtag(newtag, 'withtag', tagOrId)
+
+    def bbox(self, *args):
+        """Return a tuple of X1,Y1,X2,Y2 coordinates for a rectangle
+        which encloses all items with tags specified as arguments."""
+        return self._getints(
+            self.tk.call((self._w, 'bbox') + args)) or None
+
+    def tag_unbind(self, tagOrId, sequence, funcid=None):
+        """Unbind for all items with TAGORID for event SEQUENCE  the
+        function identified with FUNCID."""
+        self._unbind((self._w, 'bind', tagOrId, sequence), funcid)
+
+    def tag_bind(self, tagOrId, sequence=None, func=None, add=None):
+        """Bind to all items with TAGORID at event SEQUENCE a call to function FUNC.
+
+        An additional boolean parameter ADD specifies whether FUNC will be
+        called additionally to the other bound function or whether it will
+        replace the previous function. See bind for the return value."""
+        return self._bind((self._w, 'bind', tagOrId),
+                  sequence, func, add)
+
+    def canvasx(self, screenx, gridspacing=None):
+        """Return the canvas x coordinate of pixel position SCREENX rounded
+        to nearest multiple of GRIDSPACING units."""
+        return self.tk.getdouble(self.tk.call(
+            self._w, 'canvasx', screenx, gridspacing))
+
+    def canvasy(self, screeny, gridspacing=None):
+        """Return the canvas y coordinate of pixel position SCREENY rounded
+        to nearest multiple of GRIDSPACING units."""
+        return self.tk.getdouble(self.tk.call(
+            self._w, 'canvasy', screeny, gridspacing))
+
+    def coords(self, *args):
+        """Return a list of coordinates for the item given in ARGS."""
+        args = _flatten(args)
+        return [self.tk.getdouble(x) for x in
+                           self.tk.splitlist(
+                   self.tk.call((self._w, 'coords') + args))]
+
+    def _create(self, itemType, args, kw): # Args: (val, val, ..., cnf={})
+        """Internal function."""
+        args = _flatten(args)
+        cnf = args[-1]
+        if isinstance(cnf, (dict, tuple)):
+            args = args[:-1]
+        else:
+            cnf = {}
+        return self.tk.getint(self.tk.call(
+            self._w, 'create', itemType,
+            *(args + self._options(cnf, kw))))
+
+    def create_arc(self, *args, **kw):
+        """Create arc shaped region with coordinates x1,y1,x2,y2."""
+        return self._create('arc', args, kw)
+
+    def create_bitmap(self, *args, **kw):
+        """Create bitmap with coordinates x1,y1."""
+        return self._create('bitmap', args, kw)
+
+    def create_image(self, *args, **kw):
+        """Create image item with coordinates x1,y1."""
+        return self._create('image', args, kw)
+
+    def create_line(self, *args, **kw):
+        """Create line with coordinates x1,y1,...,xn,yn."""
+        return self._create('line', args, kw)
+
+    def create_oval(self, *args, **kw):
+        """Create oval with coordinates x1,y1,x2,y2."""
+        return self._create('oval', args, kw)
+
+    def create_polygon(self, *args, **kw):
+        """Create polygon with coordinates x1,y1,...,xn,yn."""
+        return self._create('polygon', args, kw)
+
+    def create_rectangle(self, *args, **kw):
+        """Create rectangle with coordinates x1,y1,x2,y2."""
+        return self._create('rectangle', args, kw)
+
+    def create_text(self, *args, **kw):
+        """Create text with coordinates x1,y1."""
+        return self._create('text', args, kw)
+
+    def create_window(self, *args, **kw):
+        """Create window with coordinates x1,y1,x2,y2."""
+        return self._create('window', args, kw)
+
+    def dchars(self, *args):
+        """Delete characters of text items identified by tag or id in ARGS (possibly
+        several times) from FIRST to LAST character (including)."""
+        self.tk.call((self._w, 'dchars') + args)
+
+    def delete(self, *args):
+        """Delete items identified by all tag or ids contained in ARGS."""
+        self.tk.call((self._w, 'delete') + args)
+
+    def dtag(self, *args):
+        """Delete tag or id given as last arguments in ARGS from items
+        identified by first argument in ARGS."""
+        self.tk.call((self._w, 'dtag') + args)
+
+    def find(self, *args):
+        """Internal function."""
+        return self._getints(
+            self.tk.call((self._w, 'find') + args)) or ()
+
+    def find_above(self, tagOrId):
+        """Return items above TAGORID."""
+        return self.find('above', tagOrId)
+
+    def find_all(self):
+        """Return all items."""
+        return self.find('all')
+
+    def find_below(self, tagOrId):
+        """Return all items below TAGORID."""
+        return self.find('below', tagOrId)
+
+    def find_closest(self, x, y, halo=None, start=None):
+        """Return item which is closest to pixel at X, Y.
+        If several match take the top-most.
+        All items closer than HALO are considered overlapping (all are
+        closest). If START is specified the next below this tag is taken."""
+        return self.find('closest', x, y, halo, start)
+
+    def find_enclosed(self, x1, y1, x2, y2):
+        """Return all items in rectangle defined
+        by X1,Y1,X2,Y2."""
+        return self.find('enclosed', x1, y1, x2, y2)
+
+    def find_overlapping(self, x1, y1, x2, y2):
+        """Return all items which overlap the rectangle
+        defined by X1,Y1,X2,Y2."""
+        return self.find('overlapping', x1, y1, x2, y2)
+
+    def find_withtag(self, tagOrId):
+        """Return all items with TAGORID."""
+        return self.find('withtag', tagOrId)
+
+    def focus(self, *args):
+        """Set focus to the first item specified in ARGS."""
+        return self.tk.call((self._w, 'focus') + args)
+
+    def gettags(self, *args):
+        """Return tags associated with the first item specified in ARGS."""
+        return self.tk.splitlist(
+            self.tk.call((self._w, 'gettags') + args))
+
+    def icursor(self, *args):
+        """Set cursor at position POS in the item identified by TAGORID.
+        In ARGS TAGORID must be first."""
+        self.tk.call((self._w, 'icursor') + args)
+
+    def index(self, *args):
+        """Return position of cursor as integer in item specified in ARGS."""
+        return self.tk.getint(self.tk.call((self._w, 'index') + args))
+
+    def insert(self, *args):
+        """Insert TEXT in item TAGORID at position POS. ARGS must
+        be TAGORID POS TEXT."""
+        self.tk.call((self._w, 'insert') + args)
+
+    def itemcget(self, tagOrId, option):
+        """Return the value of OPTION for item TAGORID."""
+        return self.tk.call(
+            (self._w, 'itemcget') + (tagOrId, '-'+option))
+
+    def itemconfigure(self, tagOrId, cnf=None, **kw):
+        """Query or modify the configuration options of an item TAGORID.
+
+        Similar to configure() except that it applies to the specified item.
+        """
+        return self._configure(('itemconfigure', tagOrId), cnf, kw)
+
+    itemconfig = itemconfigure
+
+    # lower, tkraise/lift hide Misc.lower, Misc.tkraise/lift,
+    # so the preferred name for them is tag_lower, tag_raise
+    # (similar to tag_bind, and similar to the Text widget);
+    # unfortunately can't delete the old ones yet (maybe in 1.6)
+    def tag_lower(self, *args):
+        """Lower an item TAGORID given in ARGS
+        (optional below another item)."""
+        self.tk.call((self._w, 'lower') + args)
+
+    lower = tag_lower
+
+    def move(self, *args):
+        """Move an item TAGORID given in ARGS."""
+        self.tk.call((self._w, 'move') + args)
+
+    def moveto(self, tagOrId, x='', y=''):
+        """Move the items given by TAGORID in the canvas coordinate
+        space so that the first coordinate pair of the bottommost
+        item with tag TAGORID is located at position (X,Y).
+        X and Y may be the empty string, in which case the
+        corresponding coordinate will be unchanged. All items matching
+        TAGORID remain in the same positions relative to each other."""
+        self.tk.call(self._w, 'moveto', tagOrId, x, y)
+
+    def postscript(self, cnf={}, **kw):
+        """Print the contents of the canvas to a postscript
+        file. Valid options: colormap, colormode, file, fontmap,
+        height, pageanchor, pageheight, pagewidth, pagex, pagey,
+        rotate, width, x, y."""
+        return self.tk.call((self._w, 'postscript') +
+                    self._options(cnf, kw))
+
+    def tag_raise(self, *args):
+        """Raise an item TAGORID given in ARGS
+        (optional above another item)."""
+        self.tk.call((self._w, 'raise') + args)
+
+    lift = tkraise = tag_raise
+
+    def scale(self, *args):
+        """Scale item TAGORID with XORIGIN, YORIGIN, XSCALE, YSCALE."""
+        self.tk.call((self._w, 'scale') + args)
+
+    def scan_mark(self, x, y):
+        """Remember the current X, Y coordinates."""
+        self.tk.call(self._w, 'scan', 'mark', x, y)
+
+    def scan_dragto(self, x, y, gain=10):
+        """Adjust the view of the canvas to GAIN times the
+        difference between X and Y and the coordinates given in
+        scan_mark."""
+        self.tk.call(self._w, 'scan', 'dragto', x, y, gain)
+
+    def select_adjust(self, tagOrId, index):
+        """Adjust the end of the selection near the cursor of an item TAGORID to index."""
+        self.tk.call(self._w, 'select', 'adjust', tagOrId, index)
+
+    def select_clear(self):
+        """Clear the selection if it is in this widget."""
+        self.tk.call(self._w, 'select', 'clear')
+
+    def select_from(self, tagOrId, index):
+        """Set the fixed end of a selection in item TAGORID to INDEX."""
+        self.tk.call(self._w, 'select', 'from', tagOrId, index)
+
+    def select_item(self):
+        """Return the item which has the selection."""
+        return self.tk.call(self._w, 'select', 'item') or None
+
+    def select_to(self, tagOrId, index):
+        """Set the variable end of a selection in item TAGORID to INDEX."""
+        self.tk.call(self._w, 'select', 'to', tagOrId, index)
+
+    def type(self, tagOrId):
+        """Return the type of the item TAGORID."""
+        return self.tk.call(self._w, 'type', tagOrId) or None
+
+
+_checkbutton_count = 0
+
+class Checkbutton(Widget):
+    """Checkbutton widget which is either in on- or off-state."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a checkbutton widget with the parent MASTER.
+
+        Valid option names: activebackground, activeforeground, anchor,
+        background, bd, bg, bitmap, borderwidth, command, cursor,
+        disabledforeground, fg, font, foreground, height,
+        highlightbackground, highlightcolor, highlightthickness, image,
+        indicatoron, justify, offvalue, onvalue, padx, pady, relief,
+        selectcolor, selectimage, state, takefocus, text, textvariable,
+        underline, variable, width, wraplength."""
+        Widget.__init__(self, master, 'checkbutton', cnf, kw)
+
+    def _setup(self, master, cnf):
+        # Because Checkbutton defaults to a variable with the same name as
+        # the widget, Checkbutton default names must be globally unique,
+        # not just unique within the parent widget.
+        if not cnf.get('name'):
+            global _checkbutton_count
+            name = self.__class__.__name__.lower()
+            _checkbutton_count += 1
+            # To avoid collisions with ttk.Checkbutton, use the different
+            # name template.
+            cnf['name'] = f'!{name}-{_checkbutton_count}'
+        super()._setup(master, cnf)
+
+    def deselect(self):
+        """Put the button in off-state."""
+        self.tk.call(self._w, 'deselect')
+
+    def flash(self):
+        """Flash the button."""
+        self.tk.call(self._w, 'flash')
+
+    def invoke(self):
+        """Toggle the button and invoke a command if given as option."""
+        return self.tk.call(self._w, 'invoke')
+
+    def select(self):
+        """Put the button in on-state."""
+        self.tk.call(self._w, 'select')
+
+    def toggle(self):
+        """Toggle the button."""
+        self.tk.call(self._w, 'toggle')
+
+
+class Entry(Widget, XView):
+    """Entry widget which allows displaying simple text."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct an entry widget with the parent MASTER.
+
+        Valid option names: background, bd, bg, borderwidth, cursor,
+        exportselection, fg, font, foreground, highlightbackground,
+        highlightcolor, highlightthickness, insertbackground,
+        insertborderwidth, insertofftime, insertontime, insertwidth,
+        invalidcommand, invcmd, justify, relief, selectbackground,
+        selectborderwidth, selectforeground, show, state, takefocus,
+        textvariable, validate, validatecommand, vcmd, width,
+        xscrollcommand."""
+        Widget.__init__(self, master, 'entry', cnf, kw)
+
+    def delete(self, first, last=None):
+        """Delete text from FIRST to LAST (not included)."""
+        self.tk.call(self._w, 'delete', first, last)
+
+    def get(self):
+        """Return the text."""
+        return self.tk.call(self._w, 'get')
+
+    def icursor(self, index):
+        """Insert cursor at INDEX."""
+        self.tk.call(self._w, 'icursor', index)
+
+    def index(self, index):
+        """Return position of cursor."""
+        return self.tk.getint(self.tk.call(
+            self._w, 'index', index))
+
+    def insert(self, index, string):
+        """Insert STRING at INDEX."""
+        self.tk.call(self._w, 'insert', index, string)
+
+    def scan_mark(self, x):
+        """Remember the current X, Y coordinates."""
+        self.tk.call(self._w, 'scan', 'mark', x)
+
+    def scan_dragto(self, x):
+        """Adjust the view of the canvas to 10 times the
+        difference between X and Y and the coordinates given in
+        scan_mark."""
+        self.tk.call(self._w, 'scan', 'dragto', x)
+
+    def selection_adjust(self, index):
+        """Adjust the end of the selection near the cursor to INDEX."""
+        self.tk.call(self._w, 'selection', 'adjust', index)
+
+    select_adjust = selection_adjust
+
+    def selection_clear(self):
+        """Clear the selection if it is in this widget."""
+        self.tk.call(self._w, 'selection', 'clear')
+
+    select_clear = selection_clear
+
+    def selection_from(self, index):
+        """Set the fixed end of a selection to INDEX."""
+        self.tk.call(self._w, 'selection', 'from', index)
+
+    select_from = selection_from
+
+    def selection_present(self):
+        """Return True if there are characters selected in the entry, False
+        otherwise."""
+        return self.tk.getboolean(
+            self.tk.call(self._w, 'selection', 'present'))
+
+    select_present = selection_present
+
+    def selection_range(self, start, end):
+        """Set the selection from START to END (not included)."""
+        self.tk.call(self._w, 'selection', 'range', start, end)
+
+    select_range = selection_range
+
+    def selection_to(self, index):
+        """Set the variable end of a selection to INDEX."""
+        self.tk.call(self._w, 'selection', 'to', index)
+
+    select_to = selection_to
+
+
+class Frame(Widget):
+    """Frame widget which may contain other widgets and can have a 3D border."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a frame widget with the parent MASTER.
+
+        Valid option names: background, bd, bg, borderwidth, class,
+        colormap, container, cursor, height, highlightbackground,
+        highlightcolor, highlightthickness, relief, takefocus, visual, width."""
+        cnf = _cnfmerge((cnf, kw))
+        extra = ()
+        if 'class_' in cnf:
+            extra = ('-class', cnf['class_'])
+            del cnf['class_']
+        elif 'class' in cnf:
+            extra = ('-class', cnf['class'])
+            del cnf['class']
+        Widget.__init__(self, master, 'frame', cnf, {}, extra)
+
+
+class Label(Widget):
+    """Label widget which can display text and bitmaps."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a label widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            activebackground, activeforeground, anchor,
+            background, bitmap, borderwidth, cursor,
+            disabledforeground, font, foreground,
+            highlightbackground, highlightcolor,
+            highlightthickness, image, justify,
+            padx, pady, relief, takefocus, text,
+            textvariable, underline, wraplength
+
+        WIDGET-SPECIFIC OPTIONS
+
+            height, state, width
+
+        """
+        Widget.__init__(self, master, 'label', cnf, kw)
+
+
+class Listbox(Widget, XView, YView):
+    """Listbox widget which can display a list of strings."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a listbox widget with the parent MASTER.
+
+        Valid option names: background, bd, bg, borderwidth, cursor,
+        exportselection, fg, font, foreground, height, highlightbackground,
+        highlightcolor, highlightthickness, relief, selectbackground,
+        selectborderwidth, selectforeground, selectmode, setgrid, takefocus,
+        width, xscrollcommand, yscrollcommand, listvariable."""
+        Widget.__init__(self, master, 'listbox', cnf, kw)
+
+    def activate(self, index):
+        """Activate item identified by INDEX."""
+        self.tk.call(self._w, 'activate', index)
+
+    def bbox(self, index):
+        """Return a tuple of X1,Y1,X2,Y2 coordinates for a rectangle
+        which encloses the item identified by the given index."""
+        return self._getints(self.tk.call(self._w, 'bbox', index)) or None
+
+    def curselection(self):
+        """Return the indices of currently selected item."""
+        return self._getints(self.tk.call(self._w, 'curselection')) or ()
+
+    def delete(self, first, last=None):
+        """Delete items from FIRST to LAST (included)."""
+        self.tk.call(self._w, 'delete', first, last)
+
+    def get(self, first, last=None):
+        """Get list of items from FIRST to LAST (included)."""
+        if last is not None:
+            return self.tk.splitlist(self.tk.call(
+                self._w, 'get', first, last))
+        else:
+            return self.tk.call(self._w, 'get', first)
+
+    def index(self, index):
+        """Return index of item identified with INDEX."""
+        i = self.tk.call(self._w, 'index', index)
+        if i == 'none': return None
+        return self.tk.getint(i)
+
+    def insert(self, index, *elements):
+        """Insert ELEMENTS at INDEX."""
+        self.tk.call((self._w, 'insert', index) + elements)
+
+    def nearest(self, y):
+        """Get index of item which is nearest to y coordinate Y."""
+        return self.tk.getint(self.tk.call(
+            self._w, 'nearest', y))
+
+    def scan_mark(self, x, y):
+        """Remember the current X, Y coordinates."""
+        self.tk.call(self._w, 'scan', 'mark', x, y)
+
+    def scan_dragto(self, x, y):
+        """Adjust the view of the listbox to 10 times the
+        difference between X and Y and the coordinates given in
+        scan_mark."""
+        self.tk.call(self._w, 'scan', 'dragto', x, y)
+
+    def see(self, index):
+        """Scroll such that INDEX is visible."""
+        self.tk.call(self._w, 'see', index)
+
+    def selection_anchor(self, index):
+        """Set the fixed end oft the selection to INDEX."""
+        self.tk.call(self._w, 'selection', 'anchor', index)
+
+    select_anchor = selection_anchor
+
+    def selection_clear(self, first, last=None):
+        """Clear the selection from FIRST to LAST (included)."""
+        self.tk.call(self._w,
+                 'selection', 'clear', first, last)
+
+    select_clear = selection_clear
+
+    def selection_includes(self, index):
+        """Return True if INDEX is part of the selection."""
+        return self.tk.getboolean(self.tk.call(
+            self._w, 'selection', 'includes', index))
+
+    select_includes = selection_includes
+
+    def selection_set(self, first, last=None):
+        """Set the selection from FIRST to LAST (included) without
+        changing the currently selected elements."""
+        self.tk.call(self._w, 'selection', 'set', first, last)
+
+    select_set = selection_set
+
+    def size(self):
+        """Return the number of elements in the listbox."""
+        return self.tk.getint(self.tk.call(self._w, 'size'))
+
+    def itemcget(self, index, option):
+        """Return the value of OPTION for item at INDEX."""
+        return self.tk.call(
+            (self._w, 'itemcget') + (index, '-'+option))
+
+    def itemconfigure(self, index, cnf=None, **kw):
+        """Query or modify the configuration options of an item at INDEX.
+
+        Similar to configure() except that it applies to the specified item.
+        """
+        return self._configure(('itemconfigure', index), cnf, kw)
+
+    itemconfig = itemconfigure
+
+
+class Menu(Widget):
+    """Menu widget which allows displaying menu bars, pull-down menus and pop-up menus."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct menu widget with the parent MASTER.
+
+        Valid option names: activebackground, activeborderwidth,
+        activeforeground, background, bd, bg, borderwidth, cursor,
+        disabledforeground, fg, font, foreground, postcommand, relief,
+        selectcolor, takefocus, tearoff, tearoffcommand, title, type."""
+        Widget.__init__(self, master, 'menu', cnf, kw)
+
+    def tk_popup(self, x, y, entry=""):
+        """Post the menu at position X,Y with entry ENTRY."""
+        self.tk.call('tk_popup', self._w, x, y, entry)
+
+    def activate(self, index):
+        """Activate entry at INDEX."""
+        self.tk.call(self._w, 'activate', index)
+
+    def add(self, itemType, cnf={}, **kw):
+        """Internal function."""
+        self.tk.call((self._w, 'add', itemType) +
+                 self._options(cnf, kw))
+
+    def add_cascade(self, cnf={}, **kw):
+        """Add hierarchical menu item."""
+        self.add('cascade', cnf or kw)
+
+    def add_checkbutton(self, cnf={}, **kw):
+        """Add checkbutton menu item."""
+        self.add('checkbutton', cnf or kw)
+
+    def add_command(self, cnf={}, **kw):
+        """Add command menu item."""
+        self.add('command', cnf or kw)
+
+    def add_radiobutton(self, cnf={}, **kw):
+        """Add radio menu item."""
+        self.add('radiobutton', cnf or kw)
+
+    def add_separator(self, cnf={}, **kw):
+        """Add separator."""
+        self.add('separator', cnf or kw)
+
+    def insert(self, index, itemType, cnf={}, **kw):
+        """Internal function."""
+        self.tk.call((self._w, 'insert', index, itemType) +
+                 self._options(cnf, kw))
+
+    def insert_cascade(self, index, cnf={}, **kw):
+        """Add hierarchical menu item at INDEX."""
+        self.insert(index, 'cascade', cnf or kw)
+
+    def insert_checkbutton(self, index, cnf={}, **kw):
+        """Add checkbutton menu item at INDEX."""
+        self.insert(index, 'checkbutton', cnf or kw)
+
+    def insert_command(self, index, cnf={}, **kw):
+        """Add command menu item at INDEX."""
+        self.insert(index, 'command', cnf or kw)
+
+    def insert_radiobutton(self, index, cnf={}, **kw):
+        """Add radio menu item at INDEX."""
+        self.insert(index, 'radiobutton', cnf or kw)
+
+    def insert_separator(self, index, cnf={}, **kw):
+        """Add separator at INDEX."""
+        self.insert(index, 'separator', cnf or kw)
+
+    def delete(self, index1, index2=None):
+        """Delete menu items between INDEX1 and INDEX2 (included)."""
+        if index2 is None:
+            index2 = index1
+
+        num_index1, num_index2 = self.index(index1), self.index(index2)
+        if (num_index1 is None) or (num_index2 is None):
+            num_index1, num_index2 = 0, -1
+
+        for i in range(num_index1, num_index2 + 1):
+            if 'command' in self.entryconfig(i):
+                c = str(self.entrycget(i, 'command'))
+                if c:
+                    self.deletecommand(c)
+        self.tk.call(self._w, 'delete', index1, index2)
+
+    def entrycget(self, index, option):
+        """Return the value of OPTION for a menu item at INDEX."""
+        return self.tk.call(self._w, 'entrycget', index, '-' + option)
+
+    def entryconfigure(self, index, cnf=None, **kw):
+        """Query or modify the configuration options of a menu item at INDEX.
+
+        Similar to configure() except that it applies to the specified
+        menu item.
+        """
+        return self._configure(('entryconfigure', index), cnf, kw)
+
+    entryconfig = entryconfigure
+
+    def index(self, index):
+        """Return the index of a menu item identified by INDEX."""
+        i = self.tk.call(self._w, 'index', index)
+        return None if i in ('', 'none') else self.tk.getint(i)  # GH-103685.
+
+    def invoke(self, index):
+        """Invoke a menu item identified by INDEX and execute
+        the associated command."""
+        return self.tk.call(self._w, 'invoke', index)
+
+    def post(self, x, y):
+        """Display a menu at position X,Y."""
+        self.tk.call(self._w, 'post', x, y)
+
+    def type(self, index):
+        """Return the type of the menu item at INDEX."""
+        return self.tk.call(self._w, 'type', index)
+
+    def unpost(self):
+        """Unmap a menu."""
+        self.tk.call(self._w, 'unpost')
+
+    def xposition(self, index): # new in Tk 8.5
+        """Return the x-position of the leftmost pixel of the menu item
+        at INDEX."""
+        return self.tk.getint(self.tk.call(self._w, 'xposition', index))
+
+    def yposition(self, index):
+        """Return the y-position of the topmost pixel of the menu item at INDEX."""
+        return self.tk.getint(self.tk.call(
+            self._w, 'yposition', index))
+
+
+class Menubutton(Widget):
+    """Menubutton widget, obsolete since Tk8.0."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        Widget.__init__(self, master, 'menubutton', cnf, kw)
+
+
+class Message(Widget):
+    """Message widget to display multiline text. Obsolete since Label does it too."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        Widget.__init__(self, master, 'message', cnf, kw)
+
+
+class Radiobutton(Widget):
+    """Radiobutton widget which shows only one of several buttons in on-state."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a radiobutton widget with the parent MASTER.
+
+        Valid option names: activebackground, activeforeground, anchor,
+        background, bd, bg, bitmap, borderwidth, command, cursor,
+        disabledforeground, fg, font, foreground, height,
+        highlightbackground, highlightcolor, highlightthickness, image,
+        indicatoron, justify, padx, pady, relief, selectcolor, selectimage,
+        state, takefocus, text, textvariable, underline, value, variable,
+        width, wraplength."""
+        Widget.__init__(self, master, 'radiobutton', cnf, kw)
+
+    def deselect(self):
+        """Put the button in off-state."""
+
+        self.tk.call(self._w, 'deselect')
+
+    def flash(self):
+        """Flash the button."""
+        self.tk.call(self._w, 'flash')
+
+    def invoke(self):
+        """Toggle the button and invoke a command if given as option."""
+        return self.tk.call(self._w, 'invoke')
+
+    def select(self):
+        """Put the button in on-state."""
+        self.tk.call(self._w, 'select')
+
+
+class Scale(Widget):
+    """Scale widget which can display a numerical scale."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a scale widget with the parent MASTER.
+
+        Valid option names: activebackground, background, bigincrement, bd,
+        bg, borderwidth, command, cursor, digits, fg, font, foreground, from,
+        highlightbackground, highlightcolor, highlightthickness, label,
+        length, orient, relief, repeatdelay, repeatinterval, resolution,
+        showvalue, sliderlength, sliderrelief, state, takefocus,
+        tickinterval, to, troughcolor, variable, width."""
+        Widget.__init__(self, master, 'scale', cnf, kw)
+
+    def get(self):
+        """Get the current value as integer or float."""
+        value = self.tk.call(self._w, 'get')
+        try:
+            return self.tk.getint(value)
+        except (ValueError, TypeError, TclError):
+            return self.tk.getdouble(value)
+
+    def set(self, value):
+        """Set the value to VALUE."""
+        self.tk.call(self._w, 'set', value)
+
+    def coords(self, value=None):
+        """Return a tuple (X,Y) of the point along the centerline of the
+        trough that corresponds to VALUE or the current value if None is
+        given."""
+
+        return self._getints(self.tk.call(self._w, 'coords', value))
+
+    def identify(self, x, y):
+        """Return where the point X,Y lies. Valid return values are "slider",
+        "though1" and "though2"."""
+        return self.tk.call(self._w, 'identify', x, y)
+
+
+class Scrollbar(Widget):
+    """Scrollbar widget which displays a slider at a certain position."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a scrollbar widget with the parent MASTER.
+
+        Valid option names: activebackground, activerelief,
+        background, bd, bg, borderwidth, command, cursor,
+        elementborderwidth, highlightbackground,
+        highlightcolor, highlightthickness, jump, orient,
+        relief, repeatdelay, repeatinterval, takefocus,
+        troughcolor, width."""
+        Widget.__init__(self, master, 'scrollbar', cnf, kw)
+
+    def activate(self, index=None):
+        """Marks the element indicated by index as active.
+        The only index values understood by this method are "arrow1",
+        "slider", or "arrow2".  If any other value is specified then no
+        element of the scrollbar will be active.  If index is not specified,
+        the method returns the name of the element that is currently active,
+        or None if no element is active."""
+        return self.tk.call(self._w, 'activate', index) or None
+
+    def delta(self, deltax, deltay):
+        """Return the fractional change of the scrollbar setting if it
+        would be moved by DELTAX or DELTAY pixels."""
+        return self.tk.getdouble(
+            self.tk.call(self._w, 'delta', deltax, deltay))
+
+    def fraction(self, x, y):
+        """Return the fractional value which corresponds to a slider
+        position of X,Y."""
+        return self.tk.getdouble(self.tk.call(self._w, 'fraction', x, y))
+
+    def identify(self, x, y):
+        """Return the element under position X,Y as one of
+        "arrow1","slider","arrow2" or ""."""
+        return self.tk.call(self._w, 'identify', x, y)
+
+    def get(self):
+        """Return the current fractional values (upper and lower end)
+        of the slider position."""
+        return self._getdoubles(self.tk.call(self._w, 'get'))
+
+    def set(self, first, last):
+        """Set the fractional values of the slider position (upper and
+        lower ends as value between 0 and 1)."""
+        self.tk.call(self._w, 'set', first, last)
+
+
+class Text(Widget, XView, YView):
+    """Text widget which can display text in various forms."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a text widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            background, borderwidth, cursor,
+            exportselection, font, foreground,
+            highlightbackground, highlightcolor,
+            highlightthickness, insertbackground,
+            insertborderwidth, insertofftime,
+            insertontime, insertwidth, padx, pady,
+            relief, selectbackground,
+            selectborderwidth, selectforeground,
+            setgrid, takefocus,
+            xscrollcommand, yscrollcommand,
+
+        WIDGET-SPECIFIC OPTIONS
+
+            autoseparators, height, maxundo,
+            spacing1, spacing2, spacing3,
+            state, tabs, undo, width, wrap,
+
+        """
+        Widget.__init__(self, master, 'text', cnf, kw)
+
+    def bbox(self, index):
+        """Return a tuple of (x,y,width,height) which gives the bounding
+        box of the visible part of the character at the given index."""
+        return self._getints(
+                self.tk.call(self._w, 'bbox', index)) or None
+
+    def compare(self, index1, op, index2):
+        """Return whether between index INDEX1 and index INDEX2 the
+        relation OP is satisfied. OP is one of <, <=, ==, >=, >, or !=."""
+        return self.tk.getboolean(self.tk.call(
+            self._w, 'compare', index1, op, index2))
+
+    def count(self, index1, index2, *options, return_ints=False): # new in Tk 8.5
+        """Counts the number of relevant things between the two indices.
+
+        If INDEX1 is after INDEX2, the result will be a negative number
+        (and this holds for each of the possible options).
+
+        The actual items which are counted depends on the options given.
+        The result is a tuple of integers, one for the result of each
+        counting option given, if more than one option is specified or
+        return_ints is false (default), otherwise it is an integer.
+        Valid counting options are "chars", "displaychars",
+        "displayindices", "displaylines", "indices", "lines", "xpixels"
+        and "ypixels". The default value, if no option is specified, is
+        "indices". There is an additional possible option "update",
+        which if given then all subsequent options ensure that any
+        possible out of date information is recalculated.
+        """
+        options = ['-%s' % arg for arg in options]
+        res = self.tk.call(self._w, 'count', *options, index1, index2)
+        if not isinstance(res, int):
+            res = self._getints(res)
+            if len(res) == 1:
+                res, = res
+        if not return_ints:
+            if not res:
+                res = None
+            elif len(options) <= 1:
+                res = (res,)
+        return res
+
+    def debug(self, boolean=None):
+        """Turn on the internal consistency checks of the B-Tree inside the text
+        widget according to BOOLEAN."""
+        if boolean is None:
+            return self.tk.getboolean(self.tk.call(self._w, 'debug'))
+        self.tk.call(self._w, 'debug', boolean)
+
+    def delete(self, index1, index2=None):
+        """Delete the characters between INDEX1 and INDEX2 (not included)."""
+        self.tk.call(self._w, 'delete', index1, index2)
+
+    def dlineinfo(self, index):
+        """Return tuple (x,y,width,height,baseline) giving the bounding box
+        and baseline position of the visible part of the line containing
+        the character at INDEX."""
+        return self._getints(self.tk.call(self._w, 'dlineinfo', index))
+
+    def dump(self, index1, index2=None, command=None, **kw):
+        """Return the contents of the widget between index1 and index2.
+
+        The type of contents returned in filtered based on the keyword
+        parameters; if 'all', 'image', 'mark', 'tag', 'text', or 'window' are
+        given and true, then the corresponding items are returned. The result
+        is a list of triples of the form (key, value, index). If none of the
+        keywords are true then 'all' is used by default.
+
+        If the 'command' argument is given, it is called once for each element
+        of the list of triples, with the values of each triple serving as the
+        arguments to the function. In this case the list is not returned."""
+        args = []
+        func_name = None
+        result = None
+        if not command:
+            # Never call the dump command without the -command flag, since the
+            # output could involve Tcl quoting and would be a pain to parse
+            # right. Instead just set the command to build a list of triples
+            # as if we had done the parsing.
+            result = []
+            def append_triple(key, value, index, result=result):
+                result.append((key, value, index))
+            command = append_triple
+        try:
+            if not isinstance(command, str):
+                func_name = command = self._register(command)
+            args += ["-command", command]
+            for key in kw:
+                if kw[key]: args.append("-" + key)
+            args.append(index1)
+            if index2:
+                args.append(index2)
+            self.tk.call(self._w, "dump", *args)
+            return result
+        finally:
+            if func_name:
+                self.deletecommand(func_name)
+
+    ## new in tk8.4
+    def edit(self, *args):
+        """Internal method
+
+        This method controls the undo mechanism and
+        the modified flag. The exact behavior of the
+        command depends on the option argument that
+        follows the edit argument. The following forms
+        of the command are currently supported:
+
+        edit_modified, edit_redo, edit_reset, edit_separator
+        and edit_undo
+
+        """
+        return self.tk.call(self._w, 'edit', *args)
+
+    def edit_modified(self, arg=None):
+        """Get or Set the modified flag
+
+        If arg is not specified, returns the modified
+        flag of the widget. The insert, delete, edit undo and
+        edit redo commands or the user can set or clear the
+        modified flag. If boolean is specified, sets the
+        modified flag of the widget to arg.
+        """
+        return self.edit("modified", arg)
+
+    def edit_redo(self):
+        """Redo the last undone edit
+
+        When the undo option is true, reapplies the last
+        undone edits provided no other edits were done since
+        then. Generates an error when the redo stack is empty.
+        Does nothing when the undo option is false.
+        """
+        return self.edit("redo")
+
+    def edit_reset(self):
+        """Clears the undo and redo stacks
+        """
+        return self.edit("reset")
+
+    def edit_separator(self):
+        """Inserts a separator (boundary) on the undo stack.
+
+        Does nothing when the undo option is false
+        """
+        return self.edit("separator")
+
+    def edit_undo(self):
+        """Undoes the last edit action
+
+        If the undo option is true. An edit action is defined
+        as all the insert and delete commands that are recorded
+        on the undo stack in between two separators. Generates
+        an error when the undo stack is empty. Does nothing
+        when the undo option is false
+        """
+        return self.edit("undo")
+
+    def get(self, index1, index2=None):
+        """Return the text from INDEX1 to INDEX2 (not included)."""
+        return self.tk.call(self._w, 'get', index1, index2)
+    # (Image commands are new in 8.0)
+
+    def image_cget(self, index, option):
+        """Return the value of OPTION of an embedded image at INDEX."""
+        if option[:1] != "-":
+            option = "-" + option
+        if option[-1:] == "_":
+            option = option[:-1]
+        return self.tk.call(self._w, "image", "cget", index, option)
+
+    def image_configure(self, index, cnf=None, **kw):
+        """Query or modify the configuration options of an embedded image at INDEX.
+
+        Similar to configure() except that it applies to the specified
+        embedded image.
+        """
+        return self._configure(('image', 'configure', index), cnf, kw)
+
+    def image_create(self, index, cnf={}, **kw):
+        """Create an embedded image at INDEX."""
+        return self.tk.call(
+                 self._w, "image", "create", index,
+                 *self._options(cnf, kw))
+
+    def image_names(self):
+        """Return all names of embedded images in this widget."""
+        return self.tk.call(self._w, "image", "names")
+
+    def index(self, index):
+        """Return the index in the form line.char for INDEX."""
+        return str(self.tk.call(self._w, 'index', index))
+
+    def insert(self, index, chars, *args):
+        """Insert CHARS before the characters at INDEX. An additional
+        tag can be given in ARGS. Additional CHARS and tags can follow in ARGS."""
+        self.tk.call((self._w, 'insert', index, chars) + args)
+
+    def mark_gravity(self, markName, direction=None):
+        """Change the gravity of a mark MARKNAME to DIRECTION (LEFT or RIGHT).
+        Return the current value if None is given for DIRECTION."""
+        return self.tk.call(
+            (self._w, 'mark', 'gravity', markName, direction))
+
+    def mark_names(self):
+        """Return all mark names."""
+        return self.tk.splitlist(self.tk.call(
+            self._w, 'mark', 'names'))
+
+    def mark_set(self, markName, index):
+        """Set mark MARKNAME before the character at INDEX."""
+        self.tk.call(self._w, 'mark', 'set', markName, index)
+
+    def mark_unset(self, *markNames):
+        """Delete all marks in MARKNAMES."""
+        self.tk.call((self._w, 'mark', 'unset') + markNames)
+
+    def mark_next(self, index):
+        """Return the name of the next mark after INDEX."""
+        return self.tk.call(self._w, 'mark', 'next', index) or None
+
+    def mark_previous(self, index):
+        """Return the name of the previous mark before INDEX."""
+        return self.tk.call(self._w, 'mark', 'previous', index) or None
+
+    def peer_create(self, newPathName, cnf={}, **kw): # new in Tk 8.5
+        """Creates a peer text widget with the given newPathName, and any
+        optional standard configuration options. By default the peer will
+        have the same start and end line as the parent widget, but
+        these can be overridden with the standard configuration options."""
+        self.tk.call(self._w, 'peer', 'create', newPathName,
+            *self._options(cnf, kw))
+
+    def peer_names(self): # new in Tk 8.5
+        """Returns a list of peers of this widget (this does not include
+        the widget itself)."""
+        return self.tk.splitlist(self.tk.call(self._w, 'peer', 'names'))
+
+    def replace(self, index1, index2, chars, *args): # new in Tk 8.5
+        """Replaces the range of characters between index1 and index2 with
+        the given characters and tags specified by args.
+
+        See the method insert for some more information about args, and the
+        method delete for information about the indices."""
+        self.tk.call(self._w, 'replace', index1, index2, chars, *args)
+
+    def scan_mark(self, x, y):
+        """Remember the current X, Y coordinates."""
+        self.tk.call(self._w, 'scan', 'mark', x, y)
+
+    def scan_dragto(self, x, y):
+        """Adjust the view of the text to 10 times the
+        difference between X and Y and the coordinates given in
+        scan_mark."""
+        self.tk.call(self._w, 'scan', 'dragto', x, y)
+
+    def search(self, pattern, index, stopindex=None,
+           forwards=None, backwards=None, exact=None,
+           regexp=None, nocase=None, count=None, elide=None):
+        """Search PATTERN beginning from INDEX until STOPINDEX.
+        Return the index of the first character of a match or an
+        empty string."""
+        args = [self._w, 'search']
+        if forwards: args.append('-forwards')
+        if backwards: args.append('-backwards')
+        if exact: args.append('-exact')
+        if regexp: args.append('-regexp')
+        if nocase: args.append('-nocase')
+        if elide: args.append('-elide')
+        if count: args.append('-count'); args.append(count)
+        if pattern and pattern[0] == '-': args.append('--')
+        args.append(pattern)
+        args.append(index)
+        if stopindex: args.append(stopindex)
+        return str(self.tk.call(tuple(args)))
+
+    def see(self, index):
+        """Scroll such that the character at INDEX is visible."""
+        self.tk.call(self._w, 'see', index)
+
+    def tag_add(self, tagName, index1, *args):
+        """Add tag TAGNAME to all characters between INDEX1 and index2 in ARGS.
+        Additional pairs of indices may follow in ARGS."""
+        self.tk.call(
+            (self._w, 'tag', 'add', tagName, index1) + args)
+
+    def tag_unbind(self, tagName, sequence, funcid=None):
+        """Unbind for all characters with TAGNAME for event SEQUENCE  the
+        function identified with FUNCID."""
+        return self._unbind((self._w, 'tag', 'bind', tagName, sequence), funcid)
+
+    def tag_bind(self, tagName, sequence, func, add=None):
+        """Bind to all characters with TAGNAME at event SEQUENCE a call to function FUNC.
+
+        An additional boolean parameter ADD specifies whether FUNC will be
+        called additionally to the other bound function or whether it will
+        replace the previous function. See bind for the return value."""
+        return self._bind((self._w, 'tag', 'bind', tagName),
+                  sequence, func, add)
+
+    def _tag_bind(self, tagName, sequence=None, func=None, add=None):
+        # For tests only
+        return self._bind((self._w, 'tag', 'bind', tagName),
+                  sequence, func, add)
+
+    def tag_cget(self, tagName, option):
+        """Return the value of OPTION for tag TAGNAME."""
+        if option[:1] != '-':
+            option = '-' + option
+        if option[-1:] == '_':
+            option = option[:-1]
+        return self.tk.call(self._w, 'tag', 'cget', tagName, option)
+
+    def tag_configure(self, tagName, cnf=None, **kw):
+        """Query or modify the configuration options of a tag TAGNAME.
+
+        Similar to configure() except that it applies to the specified tag.
+        """
+        return self._configure(('tag', 'configure', tagName), cnf, kw)
+
+    tag_config = tag_configure
+
+    def tag_delete(self, *tagNames):
+        """Delete all tags in TAGNAMES."""
+        self.tk.call((self._w, 'tag', 'delete') + tagNames)
+
+    def tag_lower(self, tagName, belowThis=None):
+        """Change the priority of tag TAGNAME such that it is lower
+        than the priority of BELOWTHIS."""
+        self.tk.call(self._w, 'tag', 'lower', tagName, belowThis)
+
+    def tag_names(self, index=None):
+        """Return a list of all tag names."""
+        return self.tk.splitlist(
+            self.tk.call(self._w, 'tag', 'names', index))
+
+    def tag_nextrange(self, tagName, index1, index2=None):
+        """Return a list of start and end index for the first sequence of
+        characters between INDEX1 and INDEX2 which all have tag TAGNAME.
+        The text is searched forward from INDEX1."""
+        return self.tk.splitlist(self.tk.call(
+            self._w, 'tag', 'nextrange', tagName, index1, index2))
+
+    def tag_prevrange(self, tagName, index1, index2=None):
+        """Return a list of start and end index for the first sequence of
+        characters between INDEX1 and INDEX2 which all have tag TAGNAME.
+        The text is searched backwards from INDEX1."""
+        return self.tk.splitlist(self.tk.call(
+            self._w, 'tag', 'prevrange', tagName, index1, index2))
+
+    def tag_raise(self, tagName, aboveThis=None):
+        """Change the priority of tag TAGNAME such that it is higher
+        than the priority of ABOVETHIS."""
+        self.tk.call(
+            self._w, 'tag', 'raise', tagName, aboveThis)
+
+    def tag_ranges(self, tagName):
+        """Return a list of ranges of text which have tag TAGNAME."""
+        return self.tk.splitlist(self.tk.call(
+            self._w, 'tag', 'ranges', tagName))
+
+    def tag_remove(self, tagName, index1, index2=None):
+        """Remove tag TAGNAME from all characters between INDEX1 and INDEX2."""
+        self.tk.call(
+            self._w, 'tag', 'remove', tagName, index1, index2)
+
+    def window_cget(self, index, option):
+        """Return the value of OPTION of an embedded window at INDEX."""
+        if option[:1] != '-':
+            option = '-' + option
+        if option[-1:] == '_':
+            option = option[:-1]
+        return self.tk.call(self._w, 'window', 'cget', index, option)
+
+    def window_configure(self, index, cnf=None, **kw):
+        """Query or modify the configuration options of an embedded window at INDEX.
+
+        Similar to configure() except that it applies to the specified
+        embedded window.
+        """
+        return self._configure(('window', 'configure', index), cnf, kw)
+
+    window_config = window_configure
+
+    def window_create(self, index, cnf={}, **kw):
+        """Create a window at INDEX."""
+        self.tk.call(
+              (self._w, 'window', 'create', index)
+              + self._options(cnf, kw))
+
+    def window_names(self):
+        """Return all names of embedded windows in this widget."""
+        return self.tk.splitlist(
+            self.tk.call(self._w, 'window', 'names'))
+
+    def yview_pickplace(self, *what):
+        """Obsolete function, use see."""
+        self.tk.call((self._w, 'yview', '-pickplace') + what)
+
+
+class _setit:
+    """Internal class. It wraps the command in the widget OptionMenu."""
+
+    def __init__(self, var, value, callback=None):
+        self.__value = value
+        self.__var = var
+        self.__callback = callback
+
+    def __call__(self, *args):
+        self.__var.set(self.__value)
+        if self.__callback is not None:
+            self.__callback(self.__value, *args)
+
+
+class OptionMenu(Menubutton):
+    """OptionMenu which allows the user to select a value from a menu."""
+
+    def __init__(self, master, variable, value, *values, **kwargs):
+        """Construct an optionmenu widget with the parent MASTER, with
+        the option textvariable set to VARIABLE, the initially selected
+        value VALUE, the other menu values VALUES and an additional
+        keyword argument command."""
+        kw = {"borderwidth": 2, "textvariable": variable,
+              "indicatoron": 1, "relief": RAISED, "anchor": "c",
+              "highlightthickness": 2, "name": kwargs.pop("name", None)}
+        Widget.__init__(self, master, "menubutton", kw)
+        self.widgetName = 'tk_optionMenu'
+        menu = self.__menu = Menu(self, name="menu", tearoff=0)
+        self.menuname = menu._w
+        # 'command' is the only supported keyword
+        callback = kwargs.get('command')
+        if 'command' in kwargs:
+            del kwargs['command']
+        if kwargs:
+            raise TclError('unknown option -'+next(iter(kwargs)))
+        menu.add_command(label=value,
+                 command=_setit(variable, value, callback))
+        for v in values:
+            menu.add_command(label=v,
+                     command=_setit(variable, v, callback))
+        self["menu"] = menu
+
+    def __getitem__(self, name):
+        if name == 'menu':
+            return self.__menu
+        return Widget.__getitem__(self, name)
+
+    def destroy(self):
+        """Destroy this widget and the associated menu."""
+        Menubutton.destroy(self)
+        self.__menu = None
+
+
+class Image:
+    """Base class for images."""
+    _last_id = 0
+
+    def __init__(self, imgtype, name=None, cnf={}, master=None, **kw):
+        self.name = None
+        if master is None:
+            master = _get_default_root('create image')
+        self.tk = getattr(master, 'tk', master)
+        if not name:
+            Image._last_id += 1
+            name = "pyimage%r" % (Image._last_id,) # tk itself would use image<x>
+        if kw and cnf: cnf = _cnfmerge((cnf, kw))
+        elif kw: cnf = kw
+        options = ()
+        for k, v in cnf.items():
+            options = options + ('-'+k, v)
+        self.tk.call(('image', 'create', imgtype, name,) + options)
+        self.name = name
+
+    def __str__(self): return self.name
+
+    def __del__(self):
+        if self.name:
+            try:
+                self.tk.call('image', 'delete', self.name)
+            except TclError:
+                # May happen if the root was destroyed
+                pass
+
+    def __setitem__(self, key, value):
+        self.tk.call(self.name, 'configure', '-'+key, value)
+
+    def __getitem__(self, key):
+        return self.tk.call(self.name, 'configure', '-'+key)
+
+    def configure(self, **kw):
+        """Configure the image."""
+        res = ()
+        for k, v in _cnfmerge(kw).items():
+            if v is not None:
+                if k[-1] == '_': k = k[:-1]
+                res = res + ('-'+k, v)
+        self.tk.call((self.name, 'config') + res)
+
+    config = configure
+
+    def height(self):
+        """Return the height of the image."""
+        return self.tk.getint(
+            self.tk.call('image', 'height', self.name))
+
+    def type(self):
+        """Return the type of the image, e.g. "photo" or "bitmap"."""
+        return self.tk.call('image', 'type', self.name)
+
+    def width(self):
+        """Return the width of the image."""
+        return self.tk.getint(
+            self.tk.call('image', 'width', self.name))
+
+
+class PhotoImage(Image):
+    """Widget which can display images in PGM, PPM, GIF, PNG format."""
+
+    def __init__(self, name=None, cnf={}, master=None, **kw):
+        """Create an image with NAME.
+
+        Valid option names: data, format, file, gamma, height, palette,
+        width."""
+        Image.__init__(self, 'photo', name, cnf, master, **kw)
+
+    def blank(self):
+        """Display a transparent image."""
+        self.tk.call(self.name, 'blank')
+
+    def cget(self, option):
+        """Return the value of OPTION."""
+        return self.tk.call(self.name, 'cget', '-' + option)
+    # XXX config
+
+    def __getitem__(self, key):
+        return self.tk.call(self.name, 'cget', '-' + key)
+
+    def copy(self, *, from_coords=None, zoom=None, subsample=None):
+        """Return a new PhotoImage with the same image as this widget.
+
+        The FROM_COORDS option specifies a rectangular sub-region of the
+        source image to be copied. It must be a tuple or a list of 1 to 4
+        integers (x1, y1, x2, y2).  (x1, y1) and (x2, y2) specify diagonally
+        opposite corners of the rectangle.  If x2 and y2 are not specified,
+        the default value is the bottom-right corner of the source image.
+        The pixels copied will include the left and top edges of the
+        specified rectangle but not the bottom or right edges.  If the
+        FROM_COORDS option is not given, the default is the whole source
+        image.
+
+        If SUBSAMPLE or ZOOM are specified, the image is transformed as in
+        the subsample() or zoom() methods.  The value must be a single
+        integer or a pair of integers.
+        """
+        destImage = PhotoImage(master=self.tk)
+        destImage.copy_replace(self, from_coords=from_coords,
+                               zoom=zoom, subsample=subsample)
+        return destImage
+
+    def zoom(self, x, y='', *, from_coords=None):
+        """Return a new PhotoImage with the same image as this widget
+        but zoom it with a factor of X in the X direction and Y in the Y
+        direction.  If Y is not given, the default value is the same as X.
+
+        The FROM_COORDS option specifies a rectangular sub-region of the
+        source image to be copied, as in the copy() method.
+        """
+        if y=='': y=x
+        return self.copy(zoom=(x, y), from_coords=from_coords)
+
+    def subsample(self, x, y='', *, from_coords=None):
+        """Return a new PhotoImage based on the same image as this widget
+        but use only every Xth or Yth pixel.  If Y is not given, the
+        default value is the same as X.
+
+        The FROM_COORDS option specifies a rectangular sub-region of the
+        source image to be copied, as in the copy() method.
+        """
+        if y=='': y=x
+        return self.copy(subsample=(x, y), from_coords=from_coords)
+
+    def copy_replace(self, sourceImage, *, from_coords=None, to=None, shrink=False,
+                     zoom=None, subsample=None, compositingrule=None):
+        """Copy a region from the source image (which must be a PhotoImage) to
+        this image, possibly with pixel zooming and/or subsampling.  If no
+        options are specified, this command copies the whole of the source
+        image into this image, starting at coordinates (0, 0).
+
+        The FROM_COORDS option specifies a rectangular sub-region of the
+        source image to be copied. It must be a tuple or a list of 1 to 4
+        integers (x1, y1, x2, y2).  (x1, y1) and (x2, y2) specify diagonally
+        opposite corners of the rectangle.  If x2 and y2 are not specified,
+        the default value is the bottom-right corner of the source image.
+        The pixels copied will include the left and top edges of the
+        specified rectangle but not the bottom or right edges.  If the
+        FROM_COORDS option is not given, the default is the whole source
+        image.
+
+        The TO option specifies a rectangular sub-region of the destination
+        image to be affected.  It must be a tuple or a list of 1 to 4
+        integers (x1, y1, x2, y2).  (x1, y1) and (x2, y2) specify diagonally
+        opposite corners of the rectangle.  If x2 and y2 are not specified,
+        the default value is (x1,y1) plus the size of the source region
+        (after subsampling and zooming, if specified).  If x2 and y2 are
+        specified, the source region will be replicated if necessary to fill
+        the destination region in a tiled fashion.
+
+        If SHRINK is true, the size of the destination image should be
+        reduced, if necessary, so that the region being copied into is at
+        the bottom-right corner of the image.
+
+        If SUBSAMPLE or ZOOM are specified, the image is transformed as in
+        the subsample() or zoom() methods.  The value must be a single
+        integer or a pair of integers.
+
+        The COMPOSITINGRULE option specifies how transparent pixels in the
+        source image are combined with the destination image.  When a
+        compositing rule of 'overlay' is set, the old contents of the
+        destination image are visible, as if the source image were printed
+        on a piece of transparent film and placed over the top of the
+        destination.  When a compositing rule of 'set' is set, the old
+        contents of the destination image are discarded and the source image
+        is used as-is.  The default compositing rule is 'overlay'.
+        """
+        options = []
+        if from_coords is not None:
+            options.extend(('-from', *from_coords))
+        if to is not None:
+            options.extend(('-to', *to))
+        if shrink:
+            options.append('-shrink')
+        if zoom is not None:
+            if not isinstance(zoom, (tuple, list)):
+                zoom = (zoom,)
+            options.extend(('-zoom', *zoom))
+        if subsample is not None:
+            if not isinstance(subsample, (tuple, list)):
+                subsample = (subsample,)
+            options.extend(('-subsample', *subsample))
+        if compositingrule:
+            options.extend(('-compositingrule', compositingrule))
+        self.tk.call(self.name, 'copy', sourceImage, *options)
+
+    def get(self, x, y):
+        """Return the color (red, green, blue) of the pixel at X,Y."""
+        return self.tk.call(self.name, 'get', x, y)
+
+    def put(self, data, to=None):
+        """Put row formatted colors to image starting from
+        position TO, e.g. image.put("{red green} {blue yellow}", to=(4,6))"""
+        args = (self.name, 'put', data)
+        if to:
+            if to[0] == '-to':
+                to = to[1:]
+            args = args + ('-to',) + tuple(to)
+        self.tk.call(args)
+
+    def read(self, filename, format=None, *, from_coords=None, to=None, shrink=False):
+        """Reads image data from the file named FILENAME into the image.
+
+        The FORMAT option specifies the format of the image data in the
+        file.
+
+        The FROM_COORDS option specifies a rectangular sub-region of the image
+        file data to be copied to the destination image.  It must be a tuple
+        or a list of 1 to 4 integers (x1, y1, x2, y2).  (x1, y1) and
+        (x2, y2) specify diagonally opposite corners of the rectangle.  If
+        x2 and y2 are not specified, the default value is the bottom-right
+        corner of the source image.  The default, if this option is not
+        specified, is the whole of the image in the image file.
+
+        The TO option specifies the coordinates of the top-left corner of
+        the region of the image into which data from filename are to be
+        read.  The default is (0, 0).
+
+        If SHRINK is true, the size of the destination image will be
+        reduced, if necessary, so that the region into which the image file
+        data are read is at the bottom-right corner of the image.
+        """
+        options = ()
+        if format is not None:
+            options += ('-format', format)
+        if from_coords is not None:
+            options += ('-from', *from_coords)
+        if shrink:
+            options += ('-shrink',)
+        if to is not None:
+            options += ('-to', *to)
+        self.tk.call(self.name, 'read', filename, *options)
+
+    def write(self, filename, format=None, from_coords=None, *,
+              background=None, grayscale=False):
+        """Writes image data from the image to a file named FILENAME.
+
+        The FORMAT option specifies the name of the image file format
+        handler to be used to write the data to the file.  If this option
+        is not given, the format is guessed from the file extension.
+
+        The FROM_COORDS option specifies a rectangular region of the image
+        to be written to the image file.  It must be a tuple or a list of 1
+        to 4 integers (x1, y1, x2, y2).  If only x1 and y1 are specified,
+        the region extends from (x1,y1) to the bottom-right corner of the
+        image.  If all four coordinates are given, they specify diagonally
+        opposite corners of the rectangular region.  The default, if this
+        option is not given, is the whole image.
+
+        If BACKGROUND is specified, the data will not contain any
+        transparency information.  In all transparent pixels the color will
+        be replaced by the specified color.
+
+        If GRAYSCALE is true, the data will not contain color information.
+        All pixel data will be transformed into grayscale.
+        """
+        options = ()
+        if format is not None:
+            options += ('-format', format)
+        if from_coords is not None:
+            options += ('-from', *from_coords)
+        if grayscale:
+            options += ('-grayscale',)
+        if background is not None:
+            options += ('-background', background)
+        self.tk.call(self.name, 'write', filename, *options)
+
+    def data(self, format=None, *, from_coords=None,
+             background=None, grayscale=False):
+        """Returns image data.
+
+        The FORMAT option specifies the name of the image file format
+        handler to be used.  If this option is not given, this method uses
+        a format that consists of a tuple (one element per row) of strings
+        containing space-separated (one element per pixel/column) colors
+        in “#RRGGBB” format (where RR is a pair of hexadecimal digits for
+        the red channel, GG for green, and BB for blue).
+
+        The FROM_COORDS option specifies a rectangular region of the image
+        to be returned.  It must be a tuple or a list of 1 to 4 integers
+        (x1, y1, x2, y2).  If only x1 and y1 are specified, the region
+        extends from (x1,y1) to the bottom-right corner of the image.  If
+        all four coordinates are given, they specify diagonally opposite
+        corners of the rectangular region, including (x1, y1) and excluding
+        (x2, y2).  The default, if this option is not given, is the whole
+        image.
+
+        If BACKGROUND is specified, the data will not contain any
+        transparency information.  In all transparent pixels the color will
+        be replaced by the specified color.
+
+        If GRAYSCALE is true, the data will not contain color information.
+        All pixel data will be transformed into grayscale.
+        """
+        options = ()
+        if format is not None:
+            options += ('-format', format)
+        if from_coords is not None:
+            options += ('-from', *from_coords)
+        if grayscale:
+            options += ('-grayscale',)
+        if background is not None:
+            options += ('-background', background)
+        data = self.tk.call(self.name, 'data', *options)
+        if isinstance(data, str):  # For wantobjects = 0.
+            if format is None:
+                data = self.tk.splitlist(data)
+            else:
+                data = bytes(data, 'latin1')
+        return data
+
+    def transparency_get(self, x, y):
+        """Return True if the pixel at x,y is transparent."""
+        return self.tk.getboolean(self.tk.call(
+            self.name, 'transparency', 'get', x, y))
+
+    def transparency_set(self, x, y, boolean):
+        """Set the transparency of the pixel at x,y."""
+        self.tk.call(self.name, 'transparency', 'set', x, y, boolean)
+
+
+class BitmapImage(Image):
+    """Widget which can display images in XBM format."""
+
+    def __init__(self, name=None, cnf={}, master=None, **kw):
+        """Create a bitmap with NAME.
+
+        Valid option names: background, data, file, foreground, maskdata, maskfile."""
+        Image.__init__(self, 'bitmap', name, cnf, master, **kw)
+
+
+def image_names():
+    tk = _get_default_root('use image_names()').tk
+    return tk.splitlist(tk.call('image', 'names'))
+
+
+def image_types():
+    tk = _get_default_root('use image_types()').tk
+    return tk.splitlist(tk.call('image', 'types'))
+
+
+class Spinbox(Widget, XView):
+    """spinbox widget."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a spinbox widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            activebackground, background, borderwidth,
+            cursor, exportselection, font, foreground,
+            highlightbackground, highlightcolor,
+            highlightthickness, insertbackground,
+            insertborderwidth, insertofftime,
+            insertontime, insertwidth, justify, relief,
+            repeatdelay, repeatinterval,
+            selectbackground, selectborderwidth
+            selectforeground, takefocus, textvariable
+            xscrollcommand.
+
+        WIDGET-SPECIFIC OPTIONS
+
+            buttonbackground, buttoncursor,
+            buttondownrelief, buttonuprelief,
+            command, disabledbackground,
+            disabledforeground, format, from,
+            invalidcommand, increment,
+            readonlybackground, state, to,
+            validate, validatecommand values,
+            width, wrap,
+        """
+        Widget.__init__(self, master, 'spinbox', cnf, kw)
+
+    def bbox(self, index):
+        """Return a tuple of X1,Y1,X2,Y2 coordinates for a
+        rectangle which encloses the character given by index.
+
+        The first two elements of the list give the x and y
+        coordinates of the upper-left corner of the screen
+        area covered by the character (in pixels relative
+        to the widget) and the last two elements give the
+        width and height of the character, in pixels. The
+        bounding box may refer to a region outside the
+        visible area of the window.
+        """
+        return self._getints(self.tk.call(self._w, 'bbox', index)) or None
+
+    def delete(self, first, last=None):
+        """Delete one or more elements of the spinbox.
+
+        First is the index of the first character to delete,
+        and last is the index of the character just after
+        the last one to delete. If last isn't specified it
+        defaults to first+1, i.e. a single character is
+        deleted.  This command returns an empty string.
+        """
+        return self.tk.call(self._w, 'delete', first, last)
+
+    def get(self):
+        """Returns the spinbox's string"""
+        return self.tk.call(self._w, 'get')
+
+    def icursor(self, index):
+        """Alter the position of the insertion cursor.
+
+        The insertion cursor will be displayed just before
+        the character given by index. Returns an empty string
+        """
+        return self.tk.call(self._w, 'icursor', index)
+
+    def identify(self, x, y):
+        """Returns the name of the widget at position x, y
+
+        Return value is one of: none, buttondown, buttonup, entry
+        """
+        return self.tk.call(self._w, 'identify', x, y)
+
+    def index(self, index):
+        """Returns the numerical index corresponding to index
+        """
+        return self.tk.call(self._w, 'index', index)
+
+    def insert(self, index, s):
+        """Insert string s at index
+
+         Returns an empty string.
+        """
+        return self.tk.call(self._w, 'insert', index, s)
+
+    def invoke(self, element):
+        """Causes the specified element to be invoked
+
+        The element could be buttondown or buttonup
+        triggering the action associated with it.
+        """
+        return self.tk.call(self._w, 'invoke', element)
+
+    def scan(self, *args):
+        """Internal function."""
+        return self._getints(
+            self.tk.call((self._w, 'scan') + args)) or ()
+
+    def scan_mark(self, x):
+        """Records x and the current view in the spinbox window;
+
+        used in conjunction with later scan dragto commands.
+        Typically this command is associated with a mouse button
+        press in the widget. It returns an empty string.
+        """
+        return self.scan("mark", x)
+
+    def scan_dragto(self, x):
+        """Compute the difference between the given x argument
+        and the x argument to the last scan mark command
+
+        It then adjusts the view left or right by 10 times the
+        difference in x-coordinates. This command is typically
+        associated with mouse motion events in the widget, to
+        produce the effect of dragging the spinbox at high speed
+        through the window. The return value is an empty string.
+        """
+        return self.scan("dragto", x)
+
+    def selection(self, *args):
+        """Internal function."""
+        return self._getints(
+            self.tk.call((self._w, 'selection') + args)) or ()
+
+    def selection_adjust(self, index):
+        """Locate the end of the selection nearest to the character
+        given by index,
+
+        Then adjust that end of the selection to be at index
+        (i.e including but not going beyond index). The other
+        end of the selection is made the anchor point for future
+        select to commands. If the selection isn't currently in
+        the spinbox, then a new selection is created to include
+        the characters between index and the most recent selection
+        anchor point, inclusive.
+        """
+        return self.selection("adjust", index)
+
+    def selection_clear(self):
+        """Clear the selection
+
+        If the selection isn't in this widget then the
+        command has no effect.
+        """
+        return self.selection("clear")
+
+    def selection_element(self, element=None):
+        """Sets or gets the currently selected element.
+
+        If a spinbutton element is specified, it will be
+        displayed depressed.
+        """
+        return self.tk.call(self._w, 'selection', 'element', element)
+
+    def selection_from(self, index):
+        """Set the fixed end of a selection to INDEX."""
+        self.selection('from', index)
+
+    def selection_present(self):
+        """Return True if there are characters selected in the spinbox, False
+        otherwise."""
+        return self.tk.getboolean(
+            self.tk.call(self._w, 'selection', 'present'))
+
+    def selection_range(self, start, end):
+        """Set the selection from START to END (not included)."""
+        self.selection('range', start, end)
+
+    def selection_to(self, index):
+        """Set the variable end of a selection to INDEX."""
+        self.selection('to', index)
+
+###########################################################################
+
+
+class LabelFrame(Widget):
+    """labelframe widget."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a labelframe widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            borderwidth, cursor, font, foreground,
+            highlightbackground, highlightcolor,
+            highlightthickness, padx, pady, relief,
+            takefocus, text
+
+        WIDGET-SPECIFIC OPTIONS
+
+            background, class, colormap, container,
+            height, labelanchor, labelwidget,
+            visual, width
+        """
+        Widget.__init__(self, master, 'labelframe', cnf, kw)
+
+########################################################################
+
+
+class PanedWindow(Widget):
+    """panedwindow widget."""
+
+    def __init__(self, master=None, cnf={}, **kw):
+        """Construct a panedwindow widget with the parent MASTER.
+
+        STANDARD OPTIONS
+
+            background, borderwidth, cursor, height,
+            orient, relief, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            handlepad, handlesize, opaqueresize,
+            sashcursor, sashpad, sashrelief,
+            sashwidth, showhandle,
+        """
+        Widget.__init__(self, master, 'panedwindow', cnf, kw)
+
+    def add(self, child, **kw):
+        """Add a child widget to the panedwindow in a new pane.
+
+        The child argument is the name of the child widget
+        followed by pairs of arguments that specify how to
+        manage the windows. The possible options and values
+        are the ones accepted by the paneconfigure method.
+        """
+        self.tk.call((self._w, 'add', child) + self._options(kw))
+
+    def remove(self, child):
+        """Remove the pane containing child from the panedwindow
+
+        All geometry management options for child will be forgotten.
+        """
+        self.tk.call(self._w, 'forget', child)
+
+    forget = remove
+
+    def identify(self, x, y):
+        """Identify the panedwindow component at point x, y
+
+        If the point is over a sash or a sash handle, the result
+        is a two element list containing the index of the sash or
+        handle, and a word indicating whether it is over a sash
+        or a handle, such as {0 sash} or {2 handle}. If the point
+        is over any other part of the panedwindow, the result is
+        an empty list.
+        """
+        return self.tk.call(self._w, 'identify', x, y)
+
+    def proxy(self, *args):
+        """Internal function."""
+        return self._getints(
+            self.tk.call((self._w, 'proxy') + args)) or ()
+
+    def proxy_coord(self):
+        """Return the x and y pair of the most recent proxy location
+        """
+        return self.proxy("coord")
+
+    def proxy_forget(self):
+        """Remove the proxy from the display.
+        """
+        return self.proxy("forget")
+
+    def proxy_place(self, x, y):
+        """Place the proxy at the given x and y coordinates.
+        """
+        return self.proxy("place", x, y)
+
+    def sash(self, *args):
+        """Internal function."""
+        return self._getints(
+            self.tk.call((self._w, 'sash') + args)) or ()
+
+    def sash_coord(self, index):
+        """Return the current x and y pair for the sash given by index.
+
+        Index must be an integer between 0 and 1 less than the
+        number of panes in the panedwindow. The coordinates given are
+        those of the top left corner of the region containing the sash.
+        pathName sash dragto index x y This command computes the
+        difference between the given coordinates and the coordinates
+        given to the last sash coord command for the given sash. It then
+        moves that sash the computed difference. The return value is the
+        empty string.
+        """
+        return self.sash("coord", index)
+
+    def sash_mark(self, index):
+        """Records x and y for the sash given by index;
+
+        Used in conjunction with later dragto commands to move the sash.
+        """
+        return self.sash("mark", index)
+
+    def sash_place(self, index, x, y):
+        """Place the sash given by index at the given coordinates
+        """
+        return self.sash("place", index, x, y)
+
+    def panecget(self, child, option):
+        """Return the value of option for a child window."""
+        return self.tk.call(
+            (self._w, 'panecget') + (child, '-'+option))
+
+    def paneconfigure(self, tagOrId, cnf=None, **kw):
+        """Query or modify the configuration options for a child window.
+
+        Similar to configure() except that it applies to the specified
+        window.
+
+        The following options are supported:
+
+        after window
+            Insert the window after the window specified. window
+            should be the name of a window already managed by pathName.
+        before window
+            Insert the window before the window specified. window
+            should be the name of a window already managed by pathName.
+        height size
+            Specify a height for the window. The height will be the
+            outer dimension of the window including its border, if
+            any. If size is an empty string, or if -height is not
+            specified, then the height requested internally by the
+            window will be used initially; the height may later be
+            adjusted by the movement of sashes in the panedwindow.
+            Size may be any value accepted by Tk_GetPixels.
+        minsize n
+            Specifies that the size of the window cannot be made
+            less than n. This constraint only affects the size of
+            the widget in the paned dimension -- the x dimension
+            for horizontal panedwindows, the y dimension for
+            vertical panedwindows. May be any value accepted by
+            Tk_GetPixels.
+        padx n
+            Specifies a non-negative value indicating how much
+            extra space to leave on each side of the window in
+            the X-direction. The value may have any of the forms
+            accepted by Tk_GetPixels.
+        pady n
+            Specifies a non-negative value indicating how much
+            extra space to leave on each side of the window in
+            the Y-direction. The value may have any of the forms
+            accepted by Tk_GetPixels.
+        sticky style
+            If a window's pane is larger than the requested
+            dimensions of the window, this option may be used
+            to position (or stretch) the window within its pane.
+            Style is a string that contains zero or more of the
+            characters n, s, e or w. The string can optionally
+            contains spaces or commas, but they are ignored. Each
+            letter refers to a side (north, south, east, or west)
+            that the window will "stick" to. If both n and s
+            (or e and w) are specified, the window will be
+            stretched to fill the entire height (or width) of
+            its cavity.
+        width size
+            Specify a width for the window. The width will be
+            the outer dimension of the window including its
+            border, if any. If size is an empty string, or
+            if -width is not specified, then the width requested
+            internally by the window will be used initially; the
+            width may later be adjusted by the movement of sashes
+            in the panedwindow. Size may be any value accepted by
+            Tk_GetPixels.
+
+        """
+        if cnf is None and not kw:
+            return self._getconfigure(self._w, 'paneconfigure', tagOrId)
+        if isinstance(cnf, str) and not kw:
+            return self._getconfigure1(
+                self._w, 'paneconfigure', tagOrId, '-'+cnf)
+        self.tk.call((self._w, 'paneconfigure', tagOrId) +
+                 self._options(cnf, kw))
+
+    paneconfig = paneconfigure
+
+    def panes(self):
+        """Returns an ordered list of the child panes."""
+        return self.tk.splitlist(self.tk.call(self._w, 'panes'))
+
+# Test:
+
+
+def _test():
+    root = Tk()
+    text = "This is Tcl/Tk %s" % root.globalgetvar('tk_patchLevel')
+    text += "\nThis should be a cedilla: \xe7"
+    label = Label(root, text=text)
+    label.pack()
+    test = Button(root, text="Click me!",
+              command=lambda root=root: root.test.configure(
+                  text="[%s]" % root.test['text']))
+    test.pack()
+    root.test = test
+    quit = Button(root, text="QUIT", command=root.destroy)
+    quit.pack()
+    # The following three commands are needed so the window pops
+    # up on top on Windows...
+    root.iconify()
+    root.update()
+    root.deiconify()
+    root.mainloop()
+
+
+__all__ = [name for name, obj in globals().items()
+           if not name.startswith('_') and not isinstance(obj, types.ModuleType)
+           and name not in {'wantobjects'}]
+
+if __name__ == '__main__':
+    _test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..757880d439c02c359378c42becaf243c60484cb3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/__main__.py
@@ -0,0 +1,7 @@
+"""Main entry point"""
+
+import sys
+if sys.argv[0].endswith("__main__.py"):
+    sys.argv[0] = "python -m tkinter"
+from . import _test as main
+main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/colorchooser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/colorchooser.py
new file mode 100644
index 0000000000000000000000000000000000000000..e2fb69dba927633e614d9438a20ecee6de6b7260
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/colorchooser.py
@@ -0,0 +1,86 @@
+# tk common color chooser dialogue
+#
+# this module provides an interface to the native color dialogue
+# available in Tk 4.2 and newer.
+#
+# written by Fredrik Lundh, May 1997
+#
+# fixed initialcolor handling in August 1998
+#
+
+
+from tkinter.commondialog import Dialog
+
+__all__ = ["Chooser", "askcolor"]
+
+
+class Chooser(Dialog):
+    """Create a dialog for the tk_chooseColor command.
+
+    Args:
+        master: The master widget for this dialog.  If not provided,
+            defaults to options['parent'] (if defined).
+        options: Dictionary of options for the tk_chooseColor call.
+            initialcolor: Specifies the selected color when the
+                dialog is first displayed.  This can be a tk color
+                string or a 3-tuple of ints in the range (0, 255)
+                for an RGB triplet.
+            parent: The parent window of the color dialog.  The
+                color dialog is displayed on top of this.
+            title: A string for the title of the dialog box.
+    """
+
+    command = "tk_chooseColor"
+
+    def _fixoptions(self):
+        """Ensure initialcolor is a tk color string.
+
+        Convert initialcolor from a RGB triplet to a color string.
+        """
+        try:
+            color = self.options["initialcolor"]
+            if isinstance(color, tuple):
+                # Assume an RGB triplet.
+                self.options["initialcolor"] = "#%02x%02x%02x" % color
+        except KeyError:
+            pass
+
+    def _fixresult(self, widget, result):
+        """Adjust result returned from call to tk_chooseColor.
+
+        Return both an RGB tuple of ints in the range (0, 255) and the
+        tk color string in the form #rrggbb.
+        """
+        # Result can be many things: an empty tuple, an empty string, or
+        # a _tkinter.Tcl_Obj, so this somewhat weird check handles that.
+        if not result or not str(result):
+            return None, None  # canceled
+
+        # To simplify application code, the color chooser returns
+        # an RGB tuple together with the Tk color string.
+        r, g, b = widget.winfo_rgb(result)
+        return (r//256, g//256, b//256), str(result)
+
+
+#
+# convenience stuff
+
+def askcolor(color=None, **options):
+    """Display dialog window for selection of a color.
+
+    Convenience wrapper for the Chooser class.  Displays the color
+    chooser dialog with color as the initial value.
+    """
+
+    if color:
+        options = options.copy()
+        options["initialcolor"] = color
+
+    return Chooser(**options).show()
+
+
+# --------------------------------------------------------------------
+# test stuff
+
+if __name__ == "__main__":
+    print("color", askcolor())
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/commondialog.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/commondialog.py
new file mode 100644
index 0000000000000000000000000000000000000000..86f5387e001bf28a4c073b4e75316b8ac138845d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/commondialog.py
@@ -0,0 +1,53 @@
+# base class for tk common dialogues
+#
+# this module provides a base class for accessing the common
+# dialogues available in Tk 4.2 and newer.  use filedialog,
+# colorchooser, and messagebox to access the individual
+# dialogs.
+#
+# written by Fredrik Lundh, May 1997
+#
+
+__all__ = ["Dialog"]
+
+from tkinter import _get_temp_root, _destroy_temp_root
+
+
+class Dialog:
+
+    command = None
+
+    def __init__(self, master=None, **options):
+        if master is None:
+            master = options.get('parent')
+        self.master = master
+        self.options = options
+
+    def _fixoptions(self):
+        pass # hook
+
+    def _fixresult(self, widget, result):
+        return result # hook
+
+    def show(self, **options):
+
+        # update instance options
+        for k, v in options.items():
+            self.options[k] = v
+
+        self._fixoptions()
+
+        master = self.master
+        if master is None:
+            master = _get_temp_root()
+        try:
+            self._test_callback(master)  # The function below is replaced for some tests.
+            s = master.tk.call(self.command, *master._options(self.options))
+            s = self._fixresult(master, s)
+        finally:
+            _destroy_temp_root(master)
+
+        return s
+
+    def _test_callback(self, master):
+        pass
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/constants.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/constants.py
new file mode 100644
index 0000000000000000000000000000000000000000..63eee33d24d6c7e2a3bfb504999a74ec34b53d07
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/constants.py
@@ -0,0 +1,110 @@
+# Symbolic constants for Tk
+
+# Booleans
+NO=FALSE=OFF=0
+YES=TRUE=ON=1
+
+# -anchor and -sticky
+N='n'
+S='s'
+W='w'
+E='e'
+NW='nw'
+SW='sw'
+NE='ne'
+SE='se'
+NS='ns'
+EW='ew'
+NSEW='nsew'
+CENTER='center'
+
+# -fill
+NONE='none'
+X='x'
+Y='y'
+BOTH='both'
+
+# -side
+LEFT='left'
+TOP='top'
+RIGHT='right'
+BOTTOM='bottom'
+
+# -relief
+RAISED='raised'
+SUNKEN='sunken'
+FLAT='flat'
+RIDGE='ridge'
+GROOVE='groove'
+SOLID = 'solid'
+
+# -orient
+HORIZONTAL='horizontal'
+VERTICAL='vertical'
+
+# -tabs
+NUMERIC='numeric'
+
+# -wrap
+CHAR='char'
+WORD='word'
+
+# -align
+BASELINE='baseline'
+
+# -bordermode
+INSIDE='inside'
+OUTSIDE='outside'
+
+# Special tags, marks and insert positions
+SEL='sel'
+SEL_FIRST='sel.first'
+SEL_LAST='sel.last'
+END='end'
+INSERT='insert'
+CURRENT='current'
+ANCHOR='anchor'
+ALL='all' # e.g. Canvas.delete(ALL)
+
+# Text widget and button states
+NORMAL='normal'
+DISABLED='disabled'
+ACTIVE='active'
+# Canvas state
+HIDDEN='hidden'
+
+# Menu item types
+CASCADE='cascade'
+CHECKBUTTON='checkbutton'
+COMMAND='command'
+RADIOBUTTON='radiobutton'
+SEPARATOR='separator'
+
+# Selection modes for list boxes
+SINGLE='single'
+BROWSE='browse'
+MULTIPLE='multiple'
+EXTENDED='extended'
+
+# Activestyle for list boxes
+# NONE='none' is also valid
+DOTBOX='dotbox'
+UNDERLINE='underline'
+
+# Various canvas styles
+PIESLICE='pieslice'
+CHORD='chord'
+ARC='arc'
+FIRST='first'
+LAST='last'
+BUTT='butt'
+PROJECTING='projecting'
+ROUND='round'
+BEVEL='bevel'
+MITER='miter'
+
+# Arguments to xview/yview
+MOVETO='moveto'
+SCROLL='scroll'
+UNITS='units'
+PAGES='pages'
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dialog.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dialog.py
new file mode 100644
index 0000000000000000000000000000000000000000..36ae6c277cb66ac86a48f42d07ce4c08dce10738
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dialog.py
@@ -0,0 +1,49 @@
+# dialog.py -- Tkinter interface to the tk_dialog script.
+
+from tkinter import _cnfmerge, Widget, TclError, Button, Pack
+
+__all__ = ["Dialog"]
+
+DIALOG_ICON = 'questhead'
+
+
+class Dialog(Widget):
+    def __init__(self, master=None, cnf={}, **kw):
+        cnf = _cnfmerge((cnf, kw))
+        self.widgetName = '__dialog__'
+        self._setup(master, cnf)
+        self.num = self.tk.getint(
+                self.tk.call(
+                      'tk_dialog', self._w,
+                      cnf['title'], cnf['text'],
+                      cnf['bitmap'], cnf['default'],
+                      *cnf['strings']))
+        try: Widget.destroy(self)
+        except TclError: pass
+
+    def destroy(self): pass
+
+
+def _test():
+    d = Dialog(None, {'title': 'File Modified',
+                      'text':
+                      'File "Python.h" has been modified'
+                      ' since the last time it was saved.'
+                      ' Do you want to save it before'
+                      ' exiting the application.',
+                      'bitmap': DIALOG_ICON,
+                      'default': 0,
+                      'strings': ('Save File',
+                                  'Discard Changes',
+                                  'Return to Editor')})
+    print(d.num)
+
+
+if __name__ == '__main__':
+    t = Button(None, {'text': 'Test',
+                      'command': _test,
+                      Pack: {}})
+    q = Button(None, {'text': 'Quit',
+                      'command': t.quit,
+                      Pack: {}})
+    t.mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dnd.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dnd.py
new file mode 100644
index 0000000000000000000000000000000000000000..acec61ba71f1c9f58597de27ee292176a6a23a1e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/dnd.py
@@ -0,0 +1,324 @@
+"""Drag-and-drop support for Tkinter.
+
+This is very preliminary.  I currently only support dnd *within* one
+application, between different windows (or within the same window).
+
+I am trying to make this as generic as possible -- not dependent on
+the use of a particular widget or icon type, etc.  I also hope that
+this will work with Pmw.
+
+To enable an object to be dragged, you must create an event binding
+for it that starts the drag-and-drop process. Typically, you should
+bind <ButtonPress> to a callback function that you write. The function
+should call Tkdnd.dnd_start(source, event), where 'source' is the
+object to be dragged, and 'event' is the event that invoked the call
+(the argument to your callback function).  Even though this is a class
+instantiation, the returned instance should not be stored -- it will
+be kept alive automatically for the duration of the drag-and-drop.
+
+When a drag-and-drop is already in process for the Tk interpreter, the
+call is *ignored*; this normally averts starting multiple simultaneous
+dnd processes, e.g. because different button callbacks all
+dnd_start().
+
+The object is *not* necessarily a widget -- it can be any
+application-specific object that is meaningful to potential
+drag-and-drop targets.
+
+Potential drag-and-drop targets are discovered as follows.  Whenever
+the mouse moves, and at the start and end of a drag-and-drop move, the
+Tk widget directly under the mouse is inspected.  This is the target
+widget (not to be confused with the target object, yet to be
+determined).  If there is no target widget, there is no dnd target
+object.  If there is a target widget, and it has an attribute
+dnd_accept, this should be a function (or any callable object).  The
+function is called as dnd_accept(source, event), where 'source' is the
+object being dragged (the object passed to dnd_start() above), and
+'event' is the most recent event object (generally a <Motion> event;
+it can also be <ButtonPress> or <ButtonRelease>).  If the dnd_accept()
+function returns something other than None, this is the new dnd target
+object.  If dnd_accept() returns None, or if the target widget has no
+dnd_accept attribute, the target widget's parent is considered as the
+target widget, and the search for a target object is repeated from
+there.  If necessary, the search is repeated all the way up to the
+root widget.  If none of the target widgets can produce a target
+object, there is no target object (the target object is None).
+
+The target object thus produced, if any, is called the new target
+object.  It is compared with the old target object (or None, if there
+was no old target widget).  There are several cases ('source' is the
+source object, and 'event' is the most recent event object):
+
+- Both the old and new target objects are None.  Nothing happens.
+
+- The old and new target objects are the same object.  Its method
+dnd_motion(source, event) is called.
+
+- The old target object was None, and the new target object is not
+None.  The new target object's method dnd_enter(source, event) is
+called.
+
+- The new target object is None, and the old target object is not
+None.  The old target object's method dnd_leave(source, event) is
+called.
+
+- The old and new target objects differ and neither is None.  The old
+target object's method dnd_leave(source, event), and then the new
+target object's method dnd_enter(source, event) is called.
+
+Once this is done, the new target object replaces the old one, and the
+Tk mainloop proceeds.  The return value of the methods mentioned above
+is ignored; if they raise an exception, the normal exception handling
+mechanisms take over.
+
+The drag-and-drop processes can end in two ways: a final target object
+is selected, or no final target object is selected.  When a final
+target object is selected, it will always have been notified of the
+potential drop by a call to its dnd_enter() method, as described
+above, and possibly one or more calls to its dnd_motion() method; its
+dnd_leave() method has not been called since the last call to
+dnd_enter().  The target is notified of the drop by a call to its
+method dnd_commit(source, event).
+
+If no final target object is selected, and there was an old target
+object, its dnd_leave(source, event) method is called to complete the
+dnd sequence.
+
+Finally, the source object is notified that the drag-and-drop process
+is over, by a call to source.dnd_end(target, event), specifying either
+the selected target object, or None if no target object was selected.
+The source object can use this to implement the commit action; this is
+sometimes simpler than to do it in the target's dnd_commit().  The
+target's dnd_commit() method could then simply be aliased to
+dnd_leave().
+
+At any time during a dnd sequence, the application can cancel the
+sequence by calling the cancel() method on the object returned by
+dnd_start().  This will call dnd_leave() if a target is currently
+active; it will never call dnd_commit().
+
+"""
+
+import tkinter
+
+__all__ = ["dnd_start", "DndHandler"]
+
+
+# The factory function
+
+def dnd_start(source, event):
+    h = DndHandler(source, event)
+    if h.root is not None:
+        return h
+    else:
+        return None
+
+
+# The class that does the work
+
+class DndHandler:
+
+    root = None
+
+    def __init__(self, source, event):
+        if event.num > 5:
+            return
+        root = event.widget._root()
+        try:
+            root.__dnd
+            return # Don't start recursive dnd
+        except AttributeError:
+            root.__dnd = self
+            self.root = root
+        self.source = source
+        self.target = None
+        self.initial_button = button = event.num
+        self.initial_widget = widget = event.widget
+        self.release_pattern = "<B%d-ButtonRelease-%d>" % (button, button)
+        self.save_cursor = widget['cursor'] or ""
+        widget.bind(self.release_pattern, self.on_release)
+        widget.bind("<Motion>", self.on_motion)
+        widget['cursor'] = "hand2"
+
+    def __del__(self):
+        root = self.root
+        self.root = None
+        if root is not None:
+            try:
+                del root.__dnd
+            except AttributeError:
+                pass
+
+    def on_motion(self, event):
+        x, y = event.x_root, event.y_root
+        target_widget = self.initial_widget.winfo_containing(x, y)
+        source = self.source
+        new_target = None
+        while target_widget is not None:
+            try:
+                attr = target_widget.dnd_accept
+            except AttributeError:
+                pass
+            else:
+                new_target = attr(source, event)
+                if new_target is not None:
+                    break
+            target_widget = target_widget.master
+        old_target = self.target
+        if old_target is new_target:
+            if old_target is not None:
+                old_target.dnd_motion(source, event)
+        else:
+            if old_target is not None:
+                self.target = None
+                old_target.dnd_leave(source, event)
+            if new_target is not None:
+                new_target.dnd_enter(source, event)
+                self.target = new_target
+
+    def on_release(self, event):
+        self.finish(event, 1)
+
+    def cancel(self, event=None):
+        self.finish(event, 0)
+
+    def finish(self, event, commit=0):
+        target = self.target
+        source = self.source
+        widget = self.initial_widget
+        root = self.root
+        try:
+            del root.__dnd
+            self.initial_widget.unbind(self.release_pattern)
+            self.initial_widget.unbind("<Motion>")
+            widget['cursor'] = self.save_cursor
+            self.target = self.source = self.initial_widget = self.root = None
+            if target is not None:
+                if commit:
+                    target.dnd_commit(source, event)
+                else:
+                    target.dnd_leave(source, event)
+        finally:
+            source.dnd_end(target, event)
+
+
+# ----------------------------------------------------------------------
+# The rest is here for testing and demonstration purposes only!
+
+class Icon:
+
+    def __init__(self, name):
+        self.name = name
+        self.canvas = self.label = self.id = None
+
+    def attach(self, canvas, x=10, y=10):
+        if canvas is self.canvas:
+            self.canvas.coords(self.id, x, y)
+            return
+        if self.canvas is not None:
+            self.detach()
+        if canvas is None:
+            return
+        label = tkinter.Label(canvas, text=self.name,
+                              borderwidth=2, relief="raised")
+        id = canvas.create_window(x, y, window=label, anchor="nw")
+        self.canvas = canvas
+        self.label = label
+        self.id = id
+        label.bind("<ButtonPress>", self.press)
+
+    def detach(self):
+        canvas = self.canvas
+        if canvas is None:
+            return
+        id = self.id
+        label = self.label
+        self.canvas = self.label = self.id = None
+        canvas.delete(id)
+        label.destroy()
+
+    def press(self, event):
+        if dnd_start(self, event):
+            # where the pointer is relative to the label widget:
+            self.x_off = event.x
+            self.y_off = event.y
+            # where the widget is relative to the canvas:
+            self.x_orig, self.y_orig = self.canvas.coords(self.id)
+
+    def move(self, event):
+        x, y = self.where(self.canvas, event)
+        self.canvas.coords(self.id, x, y)
+
+    def putback(self):
+        self.canvas.coords(self.id, self.x_orig, self.y_orig)
+
+    def where(self, canvas, event):
+        # where the corner of the canvas is relative to the screen:
+        x_org = canvas.winfo_rootx()
+        y_org = canvas.winfo_rooty()
+        # where the pointer is relative to the canvas widget:
+        x = event.x_root - x_org
+        y = event.y_root - y_org
+        # compensate for initial pointer offset
+        return x - self.x_off, y - self.y_off
+
+    def dnd_end(self, target, event):
+        pass
+
+
+class Tester:
+
+    def __init__(self, root):
+        self.top = tkinter.Toplevel(root)
+        self.canvas = tkinter.Canvas(self.top, width=100, height=100)
+        self.canvas.pack(fill="both", expand=1)
+        self.canvas.dnd_accept = self.dnd_accept
+
+    def dnd_accept(self, source, event):
+        return self
+
+    def dnd_enter(self, source, event):
+        self.canvas.focus_set() # Show highlight border
+        x, y = source.where(self.canvas, event)
+        x1, y1, x2, y2 = source.canvas.bbox(source.id)
+        dx, dy = x2-x1, y2-y1
+        self.dndid = self.canvas.create_rectangle(x, y, x+dx, y+dy)
+        self.dnd_motion(source, event)
+
+    def dnd_motion(self, source, event):
+        x, y = source.where(self.canvas, event)
+        x1, y1, x2, y2 = self.canvas.bbox(self.dndid)
+        self.canvas.move(self.dndid, x-x1, y-y1)
+
+    def dnd_leave(self, source, event):
+        self.top.focus_set() # Hide highlight border
+        self.canvas.delete(self.dndid)
+        self.dndid = None
+
+    def dnd_commit(self, source, event):
+        self.dnd_leave(source, event)
+        x, y = source.where(self.canvas, event)
+        source.attach(self.canvas, x, y)
+
+
+def test():
+    root = tkinter.Tk()
+    root.geometry("+1+1")
+    tkinter.Button(command=root.quit, text="Quit").pack()
+    t1 = Tester(root)
+    t1.top.geometry("+1+60")
+    t2 = Tester(root)
+    t2.top.geometry("+120+60")
+    t3 = Tester(root)
+    t3.top.geometry("+240+60")
+    i1 = Icon("ICON1")
+    i2 = Icon("ICON2")
+    i3 = Icon("ICON3")
+    i1.attach(t1.canvas)
+    i2.attach(t2.canvas)
+    i3.attach(t3.canvas)
+    root.mainloop()
+
+
+if __name__ == '__main__':
+    test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/filedialog.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/filedialog.py
new file mode 100644
index 0000000000000000000000000000000000000000..e2eff98e601c07c00baf66a4797915c47866acc3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/filedialog.py
@@ -0,0 +1,492 @@
+"""File selection dialog classes.
+
+Classes:
+
+- FileDialog
+- LoadFileDialog
+- SaveFileDialog
+
+This module also presents tk common file dialogues, it provides interfaces
+to the native file dialogues available in Tk 4.2 and newer, and the
+directory dialogue available in Tk 8.3 and newer.
+These interfaces were written by Fredrik Lundh, May 1997.
+"""
+__all__ = ["FileDialog", "LoadFileDialog", "SaveFileDialog",
+           "Open", "SaveAs", "Directory",
+           "askopenfilename", "asksaveasfilename", "askopenfilenames",
+           "askopenfile", "askopenfiles", "asksaveasfile", "askdirectory"]
+
+import fnmatch
+import os
+from tkinter import (
+    Frame, LEFT, YES, BOTTOM, Entry, TOP, Button, Tk, X,
+    Toplevel, RIGHT, Y, END, Listbox, BOTH, Scrollbar,
+)
+from tkinter.dialog import Dialog
+from tkinter import commondialog
+from tkinter.simpledialog import _setup_dialog
+
+
+dialogstates = {}
+
+
+class FileDialog:
+
+    """Standard file selection dialog -- no checks on selected file.
+
+    Usage:
+
+        d = FileDialog(master)
+        fname = d.go(dir_or_file, pattern, default, key)
+        if fname is None: ...canceled...
+        else: ...open file...
+
+    All arguments to go() are optional.
+
+    The 'key' argument specifies a key in the global dictionary
+    'dialogstates', which keeps track of the values for the directory
+    and pattern arguments, overriding the values passed in (it does
+    not keep track of the default argument!).  If no key is specified,
+    the dialog keeps no memory of previous state.  Note that memory is
+    kept even when the dialog is canceled.  (All this emulates the
+    behavior of the Macintosh file selection dialogs.)
+
+    """
+
+    title = "File Selection Dialog"
+
+    def __init__(self, master, title=None):
+        if title is None: title = self.title
+        self.master = master
+        self.directory = None
+
+        self.top = Toplevel(master)
+        self.top.title(title)
+        self.top.iconname(title)
+        _setup_dialog(self.top)
+
+        self.botframe = Frame(self.top)
+        self.botframe.pack(side=BOTTOM, fill=X)
+
+        self.selection = Entry(self.top)
+        self.selection.pack(side=BOTTOM, fill=X)
+        self.selection.bind('<Return>', self.ok_event)
+
+        self.filter = Entry(self.top)
+        self.filter.pack(side=TOP, fill=X)
+        self.filter.bind('<Return>', self.filter_command)
+
+        self.midframe = Frame(self.top)
+        self.midframe.pack(expand=YES, fill=BOTH)
+
+        self.filesbar = Scrollbar(self.midframe)
+        self.filesbar.pack(side=RIGHT, fill=Y)
+        self.files = Listbox(self.midframe, exportselection=0,
+                             yscrollcommand=(self.filesbar, 'set'))
+        self.files.pack(side=RIGHT, expand=YES, fill=BOTH)
+        btags = self.files.bindtags()
+        self.files.bindtags(btags[1:] + btags[:1])
+        self.files.bind('<ButtonRelease-1>', self.files_select_event)
+        self.files.bind('<Double-ButtonRelease-1>', self.files_double_event)
+        self.filesbar.config(command=(self.files, 'yview'))
+
+        self.dirsbar = Scrollbar(self.midframe)
+        self.dirsbar.pack(side=LEFT, fill=Y)
+        self.dirs = Listbox(self.midframe, exportselection=0,
+                            yscrollcommand=(self.dirsbar, 'set'))
+        self.dirs.pack(side=LEFT, expand=YES, fill=BOTH)
+        self.dirsbar.config(command=(self.dirs, 'yview'))
+        btags = self.dirs.bindtags()
+        self.dirs.bindtags(btags[1:] + btags[:1])
+        self.dirs.bind('<ButtonRelease-1>', self.dirs_select_event)
+        self.dirs.bind('<Double-ButtonRelease-1>', self.dirs_double_event)
+
+        self.ok_button = Button(self.botframe,
+                                 text="OK",
+                                 command=self.ok_command)
+        self.ok_button.pack(side=LEFT)
+        self.filter_button = Button(self.botframe,
+                                    text="Filter",
+                                    command=self.filter_command)
+        self.filter_button.pack(side=LEFT, expand=YES)
+        self.cancel_button = Button(self.botframe,
+                                    text="Cancel",
+                                    command=self.cancel_command)
+        self.cancel_button.pack(side=RIGHT)
+
+        self.top.protocol('WM_DELETE_WINDOW', self.cancel_command)
+        # XXX Are the following okay for a general audience?
+        self.top.bind('<Alt-w>', self.cancel_command)
+        self.top.bind('<Alt-W>', self.cancel_command)
+
+    def go(self, dir_or_file=os.curdir, pattern="*", default="", key=None):
+        if key and key in dialogstates:
+            self.directory, pattern = dialogstates[key]
+        else:
+            dir_or_file = os.path.expanduser(dir_or_file)
+            if os.path.isdir(dir_or_file):
+                self.directory = dir_or_file
+            else:
+                self.directory, default = os.path.split(dir_or_file)
+        self.set_filter(self.directory, pattern)
+        self.set_selection(default)
+        self.filter_command()
+        self.selection.focus_set()
+        self.top.wait_visibility() # window needs to be visible for the grab
+        self.top.grab_set()
+        self.how = None
+        self.master.mainloop()          # Exited by self.quit(how)
+        if key:
+            directory, pattern = self.get_filter()
+            if self.how:
+                directory = os.path.dirname(self.how)
+            dialogstates[key] = directory, pattern
+        self.top.destroy()
+        return self.how
+
+    def quit(self, how=None):
+        self.how = how
+        self.master.quit()              # Exit mainloop()
+
+    def dirs_double_event(self, event):
+        self.filter_command()
+
+    def dirs_select_event(self, event):
+        dir, pat = self.get_filter()
+        subdir = self.dirs.get('active')
+        dir = os.path.normpath(os.path.join(self.directory, subdir))
+        self.set_filter(dir, pat)
+
+    def files_double_event(self, event):
+        self.ok_command()
+
+    def files_select_event(self, event):
+        file = self.files.get('active')
+        self.set_selection(file)
+
+    def ok_event(self, event):
+        self.ok_command()
+
+    def ok_command(self):
+        self.quit(self.get_selection())
+
+    def filter_command(self, event=None):
+        dir, pat = self.get_filter()
+        try:
+            names = os.listdir(dir)
+        except OSError:
+            self.master.bell()
+            return
+        self.directory = dir
+        self.set_filter(dir, pat)
+        names.sort()
+        subdirs = [os.pardir]
+        matchingfiles = []
+        for name in names:
+            fullname = os.path.join(dir, name)
+            if os.path.isdir(fullname):
+                subdirs.append(name)
+            elif fnmatch.fnmatch(name, pat):
+                matchingfiles.append(name)
+        self.dirs.delete(0, END)
+        for name in subdirs:
+            self.dirs.insert(END, name)
+        self.files.delete(0, END)
+        for name in matchingfiles:
+            self.files.insert(END, name)
+        head, tail = os.path.split(self.get_selection())
+        if tail == os.curdir: tail = ''
+        self.set_selection(tail)
+
+    def get_filter(self):
+        filter = self.filter.get()
+        filter = os.path.expanduser(filter)
+        if filter[-1:] == os.sep or os.path.isdir(filter):
+            filter = os.path.join(filter, "*")
+        return os.path.split(filter)
+
+    def get_selection(self):
+        file = self.selection.get()
+        file = os.path.expanduser(file)
+        return file
+
+    def cancel_command(self, event=None):
+        self.quit()
+
+    def set_filter(self, dir, pat):
+        if not os.path.isabs(dir):
+            try:
+                pwd = os.getcwd()
+            except OSError:
+                pwd = None
+            if pwd:
+                dir = os.path.join(pwd, dir)
+                dir = os.path.normpath(dir)
+        self.filter.delete(0, END)
+        self.filter.insert(END, os.path.join(dir or os.curdir, pat or "*"))
+
+    def set_selection(self, file):
+        self.selection.delete(0, END)
+        self.selection.insert(END, os.path.join(self.directory, file))
+
+
+class LoadFileDialog(FileDialog):
+
+    """File selection dialog which checks that the file exists."""
+
+    title = "Load File Selection Dialog"
+
+    def ok_command(self):
+        file = self.get_selection()
+        if not os.path.isfile(file):
+            self.master.bell()
+        else:
+            self.quit(file)
+
+
+class SaveFileDialog(FileDialog):
+
+    """File selection dialog which checks that the file may be created."""
+
+    title = "Save File Selection Dialog"
+
+    def ok_command(self):
+        file = self.get_selection()
+        if os.path.exists(file):
+            if os.path.isdir(file):
+                self.master.bell()
+                return
+            d = Dialog(self.top,
+                       title="Overwrite Existing File Question",
+                       text="Overwrite existing file %r?" % (file,),
+                       bitmap='questhead',
+                       default=1,
+                       strings=("Yes", "Cancel"))
+            if d.num != 0:
+                return
+        else:
+            head, tail = os.path.split(file)
+            if not os.path.isdir(head):
+                self.master.bell()
+                return
+        self.quit(file)
+
+
+# For the following classes and modules:
+#
+# options (all have default values):
+#
+# - defaultextension: added to filename if not explicitly given
+#
+# - filetypes: sequence of (label, pattern) tuples.  the same pattern
+#   may occur with several patterns.  use "*" as pattern to indicate
+#   all files.
+#
+# - initialdir: initial directory.  preserved by dialog instance.
+#
+# - initialfile: initial file (ignored by the open dialog).  preserved
+#   by dialog instance.
+#
+# - parent: which window to place the dialog on top of
+#
+# - title: dialog title
+#
+# - multiple: if true user may select more than one file
+#
+# options for the directory chooser:
+#
+# - initialdir, parent, title: see above
+#
+# - mustexist: if true, user must pick an existing directory
+#
+
+
+class _Dialog(commondialog.Dialog):
+
+    def _fixoptions(self):
+        try:
+            # make sure "filetypes" is a tuple
+            self.options["filetypes"] = tuple(self.options["filetypes"])
+        except KeyError:
+            pass
+
+    def _fixresult(self, widget, result):
+        if result:
+            # keep directory and filename until next time
+            # convert Tcl path objects to strings
+            try:
+                result = result.string
+            except AttributeError:
+                # it already is a string
+                pass
+            path, file = os.path.split(result)
+            self.options["initialdir"] = path
+            self.options["initialfile"] = file
+        self.filename = result # compatibility
+        return result
+
+
+#
+# file dialogs
+
+class Open(_Dialog):
+    "Ask for a filename to open"
+
+    command = "tk_getOpenFile"
+
+    def _fixresult(self, widget, result):
+        if isinstance(result, tuple):
+            # multiple results:
+            result = tuple([getattr(r, "string", r) for r in result])
+            if result:
+                path, file = os.path.split(result[0])
+                self.options["initialdir"] = path
+                # don't set initialfile or filename, as we have multiple of these
+            return result
+        if not widget.tk.wantobjects() and "multiple" in self.options:
+            # Need to split result explicitly
+            return self._fixresult(widget, widget.tk.splitlist(result))
+        return _Dialog._fixresult(self, widget, result)
+
+
+class SaveAs(_Dialog):
+    "Ask for a filename to save as"
+
+    command = "tk_getSaveFile"
+
+
+# the directory dialog has its own _fix routines.
+class Directory(commondialog.Dialog):
+    "Ask for a directory"
+
+    command = "tk_chooseDirectory"
+
+    def _fixresult(self, widget, result):
+        if result:
+            # convert Tcl path objects to strings
+            try:
+                result = result.string
+            except AttributeError:
+                # it already is a string
+                pass
+            # keep directory until next time
+            self.options["initialdir"] = result
+        self.directory = result # compatibility
+        return result
+
+#
+# convenience stuff
+
+
+def askopenfilename(**options):
+    "Ask for a filename to open"
+
+    return Open(**options).show()
+
+
+def asksaveasfilename(**options):
+    "Ask for a filename to save as"
+
+    return SaveAs(**options).show()
+
+
+def askopenfilenames(**options):
+    """Ask for multiple filenames to open
+
+    Returns a list of filenames or empty list if
+    cancel button selected
+    """
+    options["multiple"]=1
+    return Open(**options).show()
+
+# FIXME: are the following  perhaps a bit too convenient?
+
+
+def askopenfile(mode = "r", **options):
+    "Ask for a filename to open, and returned the opened file"
+
+    filename = Open(**options).show()
+    if filename:
+        return open(filename, mode)
+    return None
+
+
+def askopenfiles(mode = "r", **options):
+    """Ask for multiple filenames and return the open file
+    objects
+
+    returns a list of open file objects or an empty list if
+    cancel selected
+    """
+
+    files = askopenfilenames(**options)
+    if files:
+        ofiles=[]
+        for filename in files:
+            ofiles.append(open(filename, mode))
+        files=ofiles
+    return files
+
+
+def asksaveasfile(mode = "w", **options):
+    "Ask for a filename to save as, and returned the opened file"
+
+    filename = SaveAs(**options).show()
+    if filename:
+        return open(filename, mode)
+    return None
+
+
+def askdirectory (**options):
+    "Ask for a directory, and return the file name"
+    return Directory(**options).show()
+
+
+# --------------------------------------------------------------------
+# test stuff
+
+def test():
+    """Simple test program."""
+    root = Tk()
+    root.withdraw()
+    fd = LoadFileDialog(root)
+    loadfile = fd.go(key="test")
+    fd = SaveFileDialog(root)
+    savefile = fd.go(key="test")
+    print(loadfile, savefile)
+
+    # Since the file name may contain non-ASCII characters, we need
+    # to find an encoding that likely supports the file name, and
+    # displays correctly on the terminal.
+
+    # Start off with UTF-8
+    enc = "utf-8"
+
+    # See whether CODESET is defined
+    try:
+        import locale
+        locale.setlocale(locale.LC_ALL,'')
+        enc = locale.nl_langinfo(locale.CODESET)
+    except (ImportError, AttributeError):
+        pass
+
+    # dialog for opening files
+
+    openfilename=askopenfilename(filetypes=[("all files", "*")])
+    try:
+        fp=open(openfilename,"r")
+        fp.close()
+    except BaseException as exc:
+        print("Could not open File: ")
+        print(exc)
+
+    print("open", openfilename.encode(enc))
+
+    # dialog for saving files
+
+    saveasfilename=asksaveasfilename()
+    print("saveas", saveasfilename.encode(enc))
+
+
+if __name__ == '__main__':
+    test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/font.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/font.py
new file mode 100644
index 0000000000000000000000000000000000000000..3e24e28ef58cde90dafe78016ce38867a008b450
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/font.py
@@ -0,0 +1,239 @@
+# Tkinter font wrapper
+#
+# written by Fredrik Lundh, February 1998
+#
+
+import itertools
+import tkinter
+
+__version__ = "0.9"
+__all__ = ["NORMAL", "ROMAN", "BOLD", "ITALIC",
+           "nametofont", "Font", "families", "names"]
+
+# weight/slant
+NORMAL = "normal"
+ROMAN = "roman"
+BOLD   = "bold"
+ITALIC = "italic"
+
+
+def nametofont(name, root=None):
+    """Given the name of a tk named font, returns a Font representation.
+    """
+    return Font(name=name, exists=True, root=root)
+
+
+class Font:
+    """Represents a named font.
+
+    Constructor options are:
+
+    font -- font specifier (name, system font, or (family, size, style)-tuple)
+    name -- name to use for this font configuration (defaults to a unique name)
+    exists -- does a named font by this name already exist?
+       Creates a new named font if False, points to the existing font if True.
+       Raises _tkinter.TclError if the assertion is false.
+
+       the following are ignored if font is specified:
+
+    family -- font 'family', e.g. Courier, Times, Helvetica
+    size -- font size in points
+    weight -- font thickness: NORMAL, BOLD
+    slant -- font slant: ROMAN, ITALIC
+    underline -- font underlining: false (0), true (1)
+    overstrike -- font strikeout: false (0), true (1)
+
+    """
+
+    counter = itertools.count(1)
+
+    def _set(self, kw):
+        options = []
+        for k, v in kw.items():
+            options.append("-"+k)
+            options.append(str(v))
+        return tuple(options)
+
+    def _get(self, args):
+        options = []
+        for k in args:
+            options.append("-"+k)
+        return tuple(options)
+
+    def _mkdict(self, args):
+        options = {}
+        for i in range(0, len(args), 2):
+            options[args[i][1:]] = args[i+1]
+        return options
+
+    def __init__(self, root=None, font=None, name=None, exists=False,
+                 **options):
+        if root is None:
+            root = tkinter._get_default_root('use font')
+        tk = getattr(root, 'tk', root)
+        if font:
+            # get actual settings corresponding to the given font
+            font = tk.splitlist(tk.call("font", "actual", font))
+        else:
+            font = self._set(options)
+        if not name:
+            name = "font" + str(next(self.counter))
+        self.name = name
+
+        if exists:
+            self.delete_font = False
+            # confirm font exists
+            if self.name not in tk.splitlist(tk.call("font", "names")):
+                raise tkinter._tkinter.TclError(
+                    "named font %s does not already exist" % (self.name,))
+            # if font config info supplied, apply it
+            if font:
+                tk.call("font", "configure", self.name, *font)
+        else:
+            # create new font (raises TclError if the font exists)
+            tk.call("font", "create", self.name, *font)
+            self.delete_font = True
+        self._tk = tk
+        self._split = tk.splitlist
+        self._call  = tk.call
+
+    def __str__(self):
+        return self.name
+
+    def __repr__(self):
+        return f"<{self.__class__.__module__}.{self.__class__.__qualname__}" \
+               f" object {self.name!r}>"
+
+    def __eq__(self, other):
+        if not isinstance(other, Font):
+            return NotImplemented
+        return self.name == other.name and self._tk == other._tk
+
+    def __getitem__(self, key):
+        return self.cget(key)
+
+    def __setitem__(self, key, value):
+        self.configure(**{key: value})
+
+    def __del__(self):
+        try:
+            if self.delete_font:
+                self._call("font", "delete", self.name)
+        except Exception:
+            pass
+
+    def copy(self):
+        "Return a distinct copy of the current font"
+        return Font(self._tk, **self.actual())
+
+    def actual(self, option=None, displayof=None):
+        "Return actual font attributes"
+        args = ()
+        if displayof:
+            args = ('-displayof', displayof)
+        if option:
+            args = args + ('-' + option, )
+            return self._call("font", "actual", self.name, *args)
+        else:
+            return self._mkdict(
+                self._split(self._call("font", "actual", self.name, *args)))
+
+    def cget(self, option):
+        "Get font attribute"
+        return self._call("font", "config", self.name, "-"+option)
+
+    def config(self, **options):
+        "Modify font attributes"
+        if options:
+            self._call("font", "config", self.name,
+                  *self._set(options))
+        else:
+            return self._mkdict(
+                self._split(self._call("font", "config", self.name)))
+
+    configure = config
+
+    def measure(self, text, displayof=None):
+        "Return text width"
+        args = (text,)
+        if displayof:
+            args = ('-displayof', displayof, text)
+        return self._tk.getint(self._call("font", "measure", self.name, *args))
+
+    def metrics(self, *options, **kw):
+        """Return font metrics.
+
+        For best performance, create a dummy widget
+        using this font before calling this method."""
+        args = ()
+        displayof = kw.pop('displayof', None)
+        if displayof:
+            args = ('-displayof', displayof)
+        if options:
+            args = args + self._get(options)
+            return self._tk.getint(
+                self._call("font", "metrics", self.name, *args))
+        else:
+            res = self._split(self._call("font", "metrics", self.name, *args))
+            options = {}
+            for i in range(0, len(res), 2):
+                options[res[i][1:]] = self._tk.getint(res[i+1])
+            return options
+
+
+def families(root=None, displayof=None):
+    "Get font families (as a tuple)"
+    if root is None:
+        root = tkinter._get_default_root('use font.families()')
+    args = ()
+    if displayof:
+        args = ('-displayof', displayof)
+    return root.tk.splitlist(root.tk.call("font", "families", *args))
+
+
+def names(root=None):
+    "Get names of defined fonts (as a tuple)"
+    if root is None:
+        root = tkinter._get_default_root('use font.names()')
+    return root.tk.splitlist(root.tk.call("font", "names"))
+
+
+# --------------------------------------------------------------------
+# test stuff
+
+if __name__ == "__main__":
+
+    root = tkinter.Tk()
+
+    # create a font
+    f = Font(family="times", size=30, weight=NORMAL)
+
+    print(f.actual())
+    print(f.actual("family"))
+    print(f.actual("weight"))
+
+    print(f.config())
+    print(f.cget("family"))
+    print(f.cget("weight"))
+
+    print(names())
+
+    print(f.measure("hello"), f.metrics("linespace"))
+
+    print(f.metrics(displayof=root))
+
+    f = Font(font=("Courier", 20, "bold"))
+    print(f.measure("hello"), f.metrics("linespace", displayof=root))
+
+    w = tkinter.Label(root, text="Hello, world", font=f)
+    w.pack()
+
+    w = tkinter.Button(root, text="Quit!", command=root.destroy)
+    w.pack()
+
+    fb = Font(font=w["font"]).copy()
+    fb.config(weight=BOLD)
+
+    w.config(font=fb)
+
+    tkinter.mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/messagebox.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/messagebox.py
new file mode 100644
index 0000000000000000000000000000000000000000..5f0343b660c68c5a884f38ca78291caf14936231
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/messagebox.py
@@ -0,0 +1,146 @@
+# tk common message boxes
+#
+# this module provides an interface to the native message boxes
+# available in Tk 4.2 and newer.
+#
+# written by Fredrik Lundh, May 1997
+#
+
+#
+# options (all have default values):
+#
+# - default: which button to make default (one of the reply codes)
+#
+# - icon: which icon to display (see below)
+#
+# - message: the message to display
+#
+# - parent: which window to place the dialog on top of
+#
+# - title: dialog title
+#
+# - type: dialog type; that is, which buttons to display (see below)
+#
+
+from tkinter.commondialog import Dialog
+
+__all__ = ["showinfo", "showwarning", "showerror",
+           "askquestion", "askokcancel", "askyesno",
+           "askyesnocancel", "askretrycancel"]
+
+#
+# constants
+
+# icons
+ERROR = "error"
+INFO = "info"
+QUESTION = "question"
+WARNING = "warning"
+
+# types
+ABORTRETRYIGNORE = "abortretryignore"
+OK = "ok"
+OKCANCEL = "okcancel"
+RETRYCANCEL = "retrycancel"
+YESNO = "yesno"
+YESNOCANCEL = "yesnocancel"
+
+# replies
+ABORT = "abort"
+RETRY = "retry"
+IGNORE = "ignore"
+OK = "ok"
+CANCEL = "cancel"
+YES = "yes"
+NO = "no"
+
+
+#
+# message dialog class
+
+class Message(Dialog):
+    "A message box"
+
+    command  = "tk_messageBox"
+
+
+#
+# convenience stuff
+
+# Rename _icon and _type options to allow overriding them in options
+def _show(title=None, message=None, _icon=None, _type=None, **options):
+    if _icon and "icon" not in options:    options["icon"] = _icon
+    if _type and "type" not in options:    options["type"] = _type
+    if title:   options["title"] = title
+    if message: options["message"] = message
+    res = Message(**options).show()
+    # In some Tcl installations, yes/no is converted into a boolean.
+    if isinstance(res, bool):
+        if res:
+            return YES
+        return NO
+    # In others we get a Tcl_Obj.
+    return str(res)
+
+
+def showinfo(title=None, message=None, **options):
+    "Show an info message"
+    return _show(title, message, INFO, OK, **options)
+
+
+def showwarning(title=None, message=None, **options):
+    "Show a warning message"
+    return _show(title, message, WARNING, OK, **options)
+
+
+def showerror(title=None, message=None, **options):
+    "Show an error message"
+    return _show(title, message, ERROR, OK, **options)
+
+
+def askquestion(title=None, message=None, **options):
+    "Ask a question"
+    return _show(title, message, QUESTION, YESNO, **options)
+
+
+def askokcancel(title=None, message=None, **options):
+    "Ask if operation should proceed; return true if the answer is ok"
+    s = _show(title, message, QUESTION, OKCANCEL, **options)
+    return s == OK
+
+
+def askyesno(title=None, message=None, **options):
+    "Ask a question; return true if the answer is yes"
+    s = _show(title, message, QUESTION, YESNO, **options)
+    return s == YES
+
+
+def askyesnocancel(title=None, message=None, **options):
+    "Ask a question; return true if the answer is yes, None if cancelled."
+    s = _show(title, message, QUESTION, YESNOCANCEL, **options)
+    # s might be a Tcl index object, so convert it to a string
+    s = str(s)
+    if s == CANCEL:
+        return None
+    return s == YES
+
+
+def askretrycancel(title=None, message=None, **options):
+    "Ask if operation should be retried; return true if the answer is yes"
+    s = _show(title, message, WARNING, RETRYCANCEL, **options)
+    return s == RETRY
+
+
+# --------------------------------------------------------------------
+# test stuff
+
+if __name__ == "__main__":
+
+    print("info", showinfo("Spam", "Egg Information"))
+    print("warning", showwarning("Spam", "Egg Warning"))
+    print("error", showerror("Spam", "Egg Alert"))
+    print("question", askquestion("Spam", "Question?"))
+    print("proceed", askokcancel("Spam", "Proceed?"))
+    print("yes/no", askyesno("Spam", "Got it?"))
+    print("yes/no/cancel", askyesnocancel("Spam", "Want it?"))
+    print("try again", askretrycancel("Spam", "Try again?"))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/scrolledtext.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/scrolledtext.py
new file mode 100644
index 0000000000000000000000000000000000000000..8dcead5e31930ea9c479c2b94e84551a1f2c6b84
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/scrolledtext.py
@@ -0,0 +1,56 @@
+"""A ScrolledText widget feels like a text widget but also has a
+vertical scroll bar on its right.  (Later, options may be added to
+add a horizontal bar as well, to make the bars disappear
+automatically when not needed, to move them to the other side of the
+window, etc.)
+
+Configuration options are passed to the Text widget.
+A Frame widget is inserted between the master and the text, to hold
+the Scrollbar widget.
+Most methods calls are inherited from the Text widget; Pack, Grid and
+Place methods are redirected to the Frame widget however.
+"""
+
+from tkinter import Frame, Text, Scrollbar, Pack, Grid, Place
+from tkinter.constants import RIGHT, LEFT, Y, BOTH
+
+__all__ = ['ScrolledText']
+
+
+class ScrolledText(Text):
+    def __init__(self, master=None, **kw):
+        self.frame = Frame(master)
+        self.vbar = Scrollbar(self.frame)
+        self.vbar.pack(side=RIGHT, fill=Y)
+
+        kw['yscrollcommand'] = self.vbar.set
+        Text.__init__(self, self.frame, **kw)
+        self.pack(side=LEFT, fill=BOTH, expand=True)
+        self.vbar['command'] = self.yview
+
+        # Copy geometry methods of self.frame without overriding Text
+        # methods -- hack!
+        text_meths = vars(Text).keys()
+        methods = vars(Pack).keys() | vars(Grid).keys() | vars(Place).keys()
+        methods = methods.difference(text_meths)
+
+        for m in methods:
+            if m[0] != '_' and m != 'config' and m != 'configure':
+                setattr(self, m, getattr(self.frame, m))
+
+    def __str__(self):
+        return str(self.frame)
+
+
+def example():
+    from tkinter.constants import END
+
+    stext = ScrolledText(bg='white', height=10)
+    stext.insert(END, __doc__)
+    stext.pack(fill=BOTH, side=LEFT, expand=True)
+    stext.focus_set()
+    stext.mainloop()
+
+
+if __name__ == "__main__":
+    example()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/simpledialog.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/simpledialog.py
new file mode 100644
index 0000000000000000000000000000000000000000..6e5b025a9f9d7dfb7518662ec7a46d2bf6fcedad
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/simpledialog.py
@@ -0,0 +1,441 @@
+#
+# An Introduction to Tkinter
+#
+# Copyright (c) 1997 by Fredrik Lundh
+#
+# This copyright applies to Dialog, askinteger, askfloat and asktring
+#
+# fredrik@pythonware.com
+# http://www.pythonware.com
+#
+"""This modules handles dialog boxes.
+
+It contains the following public symbols:
+
+SimpleDialog -- A simple but flexible modal dialog box
+
+Dialog -- a base class for dialogs
+
+askinteger -- get an integer from the user
+
+askfloat -- get a float from the user
+
+askstring -- get a string from the user
+"""
+
+from tkinter import *
+from tkinter import _get_temp_root, _destroy_temp_root
+from tkinter import messagebox
+
+
+class SimpleDialog:
+
+    def __init__(self, master,
+                 text='', buttons=[], default=None, cancel=None,
+                 title=None, class_=None):
+        if class_:
+            self.root = Toplevel(master, class_=class_)
+        else:
+            self.root = Toplevel(master)
+        if title:
+            self.root.title(title)
+            self.root.iconname(title)
+
+        _setup_dialog(self.root)
+
+        self.message = Message(self.root, text=text, aspect=400)
+        self.message.pack(expand=1, fill=BOTH)
+        self.frame = Frame(self.root)
+        self.frame.pack()
+        self.num = default
+        self.cancel = cancel
+        self.default = default
+        self.root.bind('<Return>', self.return_event)
+        for num in range(len(buttons)):
+            s = buttons[num]
+            b = Button(self.frame, text=s,
+                       command=(lambda self=self, num=num: self.done(num)))
+            if num == default:
+                b.config(relief=RIDGE, borderwidth=8)
+            b.pack(side=LEFT, fill=BOTH, expand=1)
+        self.root.protocol('WM_DELETE_WINDOW', self.wm_delete_window)
+        self.root.transient(master)
+        _place_window(self.root, master)
+
+    def go(self):
+        self.root.wait_visibility()
+        self.root.grab_set()
+        self.root.mainloop()
+        self.root.destroy()
+        return self.num
+
+    def return_event(self, event):
+        if self.default is None:
+            self.root.bell()
+        else:
+            self.done(self.default)
+
+    def wm_delete_window(self):
+        if self.cancel is None:
+            self.root.bell()
+        else:
+            self.done(self.cancel)
+
+    def done(self, num):
+        self.num = num
+        self.root.quit()
+
+
+class Dialog(Toplevel):
+
+    '''Class to open dialogs.
+
+    This class is intended as a base class for custom dialogs
+    '''
+
+    def __init__(self, parent, title = None):
+        '''Initialize a dialog.
+
+        Arguments:
+
+            parent -- a parent window (the application window)
+
+            title -- the dialog title
+        '''
+        master = parent
+        if master is None:
+            master = _get_temp_root()
+
+        Toplevel.__init__(self, master)
+
+        self.withdraw() # remain invisible for now
+        # If the parent is not viewable, don't
+        # make the child transient, or else it
+        # would be opened withdrawn
+        if parent is not None and parent.winfo_viewable():
+            self.transient(parent)
+
+        if title:
+            self.title(title)
+
+        _setup_dialog(self)
+
+        self.parent = parent
+
+        self.result = None
+
+        body = Frame(self)
+        self.initial_focus = self.body(body)
+        body.pack(padx=5, pady=5)
+
+        self.buttonbox()
+
+        if self.initial_focus is None:
+            self.initial_focus = self
+
+        self.protocol("WM_DELETE_WINDOW", self.cancel)
+
+        _place_window(self, parent)
+
+        self.initial_focus.focus_set()
+
+        # wait for window to appear on screen before calling grab_set
+        self.wait_visibility()
+        self.grab_set()
+        self.wait_window(self)
+
+    def destroy(self):
+        '''Destroy the window'''
+        self.initial_focus = None
+        Toplevel.destroy(self)
+        _destroy_temp_root(self.master)
+
+    #
+    # construction hooks
+
+    def body(self, master):
+        '''create dialog body.
+
+        return widget that should have initial focus.
+        This method should be overridden, and is called
+        by the __init__ method.
+        '''
+        pass
+
+    def buttonbox(self):
+        '''add standard button box.
+
+        override if you do not want the standard buttons
+        '''
+
+        box = Frame(self)
+
+        w = Button(box, text="OK", width=10, command=self.ok, default=ACTIVE)
+        w.pack(side=LEFT, padx=5, pady=5)
+        w = Button(box, text="Cancel", width=10, command=self.cancel)
+        w.pack(side=LEFT, padx=5, pady=5)
+
+        self.bind("<Return>", self.ok)
+        self.bind("<Escape>", self.cancel)
+
+        box.pack()
+
+    #
+    # standard button semantics
+
+    def ok(self, event=None):
+
+        if not self.validate():
+            self.initial_focus.focus_set() # put focus back
+            return
+
+        self.withdraw()
+        self.update_idletasks()
+
+        try:
+            self.apply()
+        finally:
+            self.cancel()
+
+    def cancel(self, event=None):
+
+        # put focus back to the parent window
+        if self.parent is not None:
+            self.parent.focus_set()
+        self.destroy()
+
+    #
+    # command hooks
+
+    def validate(self):
+        '''validate the data
+
+        This method is called automatically to validate the data before the
+        dialog is destroyed. By default, it always validates OK.
+        '''
+
+        return 1 # override
+
+    def apply(self):
+        '''process the data
+
+        This method is called automatically to process the data, *after*
+        the dialog is destroyed. By default, it does nothing.
+        '''
+
+        pass # override
+
+
+# Place a toplevel window at the center of parent or screen
+# It is a Python implementation of ::tk::PlaceWindow.
+def _place_window(w, parent=None):
+    w.wm_withdraw() # Remain invisible while we figure out the geometry
+    w.update_idletasks() # Actualize geometry information
+
+    minwidth = w.winfo_reqwidth()
+    minheight = w.winfo_reqheight()
+    maxwidth = w.winfo_vrootwidth()
+    maxheight = w.winfo_vrootheight()
+    if parent is not None and parent.winfo_ismapped():
+        x = parent.winfo_rootx() + (parent.winfo_width() - minwidth) // 2
+        y = parent.winfo_rooty() + (parent.winfo_height() - minheight) // 2
+        vrootx = w.winfo_vrootx()
+        vrooty = w.winfo_vrooty()
+        x = min(x, vrootx + maxwidth - minwidth)
+        x = max(x, vrootx)
+        y = min(y, vrooty + maxheight - minheight)
+        y = max(y, vrooty)
+        if w._windowingsystem == 'aqua':
+            # Avoid the native menu bar which sits on top of everything.
+            y = max(y, 22)
+    else:
+        x = (w.winfo_screenwidth() - minwidth) // 2
+        y = (w.winfo_screenheight() - minheight) // 2
+
+    w.wm_maxsize(maxwidth, maxheight)
+    w.wm_geometry('+%d+%d' % (x, y))
+    w.wm_deiconify() # Become visible at the desired location
+
+
+def _setup_dialog(w):
+    if w._windowingsystem == "aqua":
+        w.tk.call("::tk::unsupported::MacWindowStyle", "style",
+                  w, "moveableModal", "")
+    elif w._windowingsystem == "x11":
+        w.wm_attributes(type="dialog")
+
+# --------------------------------------------------------------------
+# convenience dialogues
+
+class _QueryDialog(Dialog):
+
+    def __init__(self, title, prompt,
+                 initialvalue=None,
+                 minvalue = None, maxvalue = None,
+                 parent = None):
+
+        self.prompt   = prompt
+        self.minvalue = minvalue
+        self.maxvalue = maxvalue
+
+        self.initialvalue = initialvalue
+
+        Dialog.__init__(self, parent, title)
+
+    def destroy(self):
+        self.entry = None
+        Dialog.destroy(self)
+
+    def body(self, master):
+
+        w = Label(master, text=self.prompt, justify=LEFT)
+        w.grid(row=0, padx=5, sticky=W)
+
+        self.entry = Entry(master, name="entry")
+        self.entry.grid(row=1, padx=5, sticky=W+E)
+
+        if self.initialvalue is not None:
+            self.entry.insert(0, self.initialvalue)
+            self.entry.select_range(0, END)
+
+        return self.entry
+
+    def validate(self):
+        try:
+            result = self.getresult()
+        except ValueError:
+            messagebox.showwarning(
+                "Illegal value",
+                self.errormessage + "\nPlease try again",
+                parent = self
+            )
+            return 0
+
+        if self.minvalue is not None and result < self.minvalue:
+            messagebox.showwarning(
+                "Too small",
+                "The allowed minimum value is %s. "
+                "Please try again." % self.minvalue,
+                parent = self
+            )
+            return 0
+
+        if self.maxvalue is not None and result > self.maxvalue:
+            messagebox.showwarning(
+                "Too large",
+                "The allowed maximum value is %s. "
+                "Please try again." % self.maxvalue,
+                parent = self
+            )
+            return 0
+
+        self.result = result
+
+        return 1
+
+
+class _QueryInteger(_QueryDialog):
+    errormessage = "Not an integer."
+
+    def getresult(self):
+        return self.getint(self.entry.get())
+
+
+def askinteger(title, prompt, **kw):
+    '''get an integer from the user
+
+    Arguments:
+
+        title -- the dialog title
+        prompt -- the label text
+        **kw -- see SimpleDialog class
+
+    Return value is an integer
+    '''
+    d = _QueryInteger(title, prompt, **kw)
+    return d.result
+
+
+class _QueryFloat(_QueryDialog):
+    errormessage = "Not a floating-point value."
+
+    def getresult(self):
+        return self.getdouble(self.entry.get())
+
+
+def askfloat(title, prompt, **kw):
+    '''get a float from the user
+
+    Arguments:
+
+        title -- the dialog title
+        prompt -- the label text
+        **kw -- see SimpleDialog class
+
+    Return value is a float
+    '''
+    d = _QueryFloat(title, prompt, **kw)
+    return d.result
+
+
+class _QueryString(_QueryDialog):
+    def __init__(self, *args, **kw):
+        if "show" in kw:
+            self.__show = kw["show"]
+            del kw["show"]
+        else:
+            self.__show = None
+        _QueryDialog.__init__(self, *args, **kw)
+
+    def body(self, master):
+        entry = _QueryDialog.body(self, master)
+        if self.__show is not None:
+            entry.configure(show=self.__show)
+        return entry
+
+    def getresult(self):
+        return self.entry.get()
+
+
+def askstring(title, prompt, **kw):
+    '''get a string from the user
+
+    Arguments:
+
+        title -- the dialog title
+        prompt -- the label text
+        **kw -- see SimpleDialog class
+
+    Return value is a string
+    '''
+    d = _QueryString(title, prompt, **kw)
+    return d.result
+
+
+if __name__ == '__main__':
+
+    def test():
+        root = Tk()
+        def doit(root=root):
+            d = SimpleDialog(root,
+                         text="This is a test dialog.  "
+                              "Would this have been an actual dialog, "
+                              "the buttons below would have been glowing "
+                              "in soft pink light.\n"
+                              "Do you believe this?",
+                         buttons=["Yes", "No", "Cancel"],
+                         default=0,
+                         cancel=2,
+                         title="Test Dialog")
+            print(d.go())
+            print(askinteger("Spam", "Egg count", initialvalue=12*12))
+            print(askfloat("Spam", "Egg weight\n(in tons)", minvalue=1,
+                           maxvalue=100))
+            print(askstring("Spam", "Egg label"))
+        t = Button(root, text='Test', command=doit)
+        t.pack()
+        q = Button(root, text='Quit', command=t.quit)
+        q.pack()
+        t.mainloop()
+
+    test()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/ttk.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/ttk.py
new file mode 100644
index 0000000000000000000000000000000000000000..ef2b91dfbb66388fdc89b4d01ef2a10b64d6920f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tkinter/ttk.py
@@ -0,0 +1,1650 @@
+"""Ttk wrapper.
+
+This module provides classes to allow using Tk themed widget set.
+
+Ttk is based on a revised and enhanced version of
+TIP #48 (http://tip.tcl.tk/48) specified style engine.
+
+Its basic idea is to separate, to the extent possible, the code
+implementing a widget's behavior from the code implementing its
+appearance. Widget class bindings are primarily responsible for
+maintaining the widget state and invoking callbacks, all aspects
+of the widgets appearance lies at Themes.
+"""
+
+__version__ = "0.3.1"
+
+__author__ = "Guilherme Polo <ggpolo@gmail.com>"
+
+__all__ = ["Button", "Checkbutton", "Combobox", "Entry", "Frame", "Label",
+           "Labelframe", "LabelFrame", "Menubutton", "Notebook", "Panedwindow",
+           "PanedWindow", "Progressbar", "Radiobutton", "Scale", "Scrollbar",
+           "Separator", "Sizegrip", "Spinbox", "Style", "Treeview",
+           # Extensions
+           "LabeledScale", "OptionMenu",
+           # functions
+           "tclobjs_to_py", "setup_master"]
+
+import tkinter
+from tkinter import _flatten, _join, _stringify, _splitdict
+
+
+def _format_optvalue(value, script=False):
+    """Internal function."""
+    if script:
+        # if caller passes a Tcl script to tk.call, all the values need to
+        # be grouped into words (arguments to a command in Tcl dialect)
+        value = _stringify(value)
+    elif isinstance(value, (list, tuple)):
+        value = _join(value)
+    return value
+
+def _format_optdict(optdict, script=False, ignore=None):
+    """Formats optdict to a tuple to pass it to tk.call.
+
+    E.g. (script=False):
+      {'foreground': 'blue', 'padding': [1, 2, 3, 4]} returns:
+      ('-foreground', 'blue', '-padding', '1 2 3 4')"""
+
+    opts = []
+    for opt, value in optdict.items():
+        if not ignore or opt not in ignore:
+            opts.append("-%s" % opt)
+            if value is not None:
+                opts.append(_format_optvalue(value, script))
+
+    return _flatten(opts)
+
+def _mapdict_values(items):
+    # each value in mapdict is expected to be a sequence, where each item
+    # is another sequence containing a state (or several) and a value
+    # E.g. (script=False):
+    #   [('active', 'selected', 'grey'), ('focus', [1, 2, 3, 4])]
+    #   returns:
+    #   ['active selected', 'grey', 'focus', [1, 2, 3, 4]]
+    opt_val = []
+    for *state, val in items:
+        if len(state) == 1:
+            # if it is empty (something that evaluates to False), then
+            # format it to Tcl code to denote the "normal" state
+            state = state[0] or ''
+        else:
+            # group multiple states
+            state = ' '.join(state) # raise TypeError if not str
+        opt_val.append(state)
+        if val is not None:
+            opt_val.append(val)
+    return opt_val
+
+def _format_mapdict(mapdict, script=False):
+    """Formats mapdict to pass it to tk.call.
+
+    E.g. (script=False):
+      {'expand': [('active', 'selected', 'grey'), ('focus', [1, 2, 3, 4])]}
+
+      returns:
+
+      ('-expand', '{active selected} grey focus {1, 2, 3, 4}')"""
+
+    opts = []
+    for opt, value in mapdict.items():
+        opts.extend(("-%s" % opt,
+                     _format_optvalue(_mapdict_values(value), script)))
+
+    return _flatten(opts)
+
+def _format_elemcreate(etype, script=False, *args, **kw):
+    """Formats args and kw according to the given element factory etype."""
+    specs = ()
+    opts = ()
+    if etype == "image": # define an element based on an image
+        # first arg should be the default image name
+        iname = args[0]
+        # next args, if any, are statespec/value pairs which is almost
+        # a mapdict, but we just need the value
+        imagespec = (iname, *_mapdict_values(args[1:]))
+        if script:
+            specs = (imagespec,)
+        else:
+            specs = (_join(imagespec),)
+        opts = _format_optdict(kw, script)
+
+    if etype == "vsapi":
+        # define an element whose visual appearance is drawn using the
+        # Microsoft Visual Styles API which is responsible for the
+        # themed styles on Windows XP and Vista.
+        # Availability: Tk 8.6, Windows XP and Vista.
+        if len(args) < 3:
+            class_name, part_id = args
+            statemap = (((), 1),)
+        else:
+            class_name, part_id, statemap = args
+        specs = (class_name, part_id, tuple(_mapdict_values(statemap)))
+        opts = _format_optdict(kw, script)
+
+    elif etype == "from": # clone an element
+        # it expects a themename and optionally an element to clone from,
+        # otherwise it will clone {} (empty element)
+        specs = (args[0],) # theme name
+        if len(args) > 1: # elementfrom specified
+            opts = (_format_optvalue(args[1], script),)
+
+    if script:
+        specs = _join(specs)
+        opts = ' '.join(opts)
+        return specs, opts
+    else:
+        return *specs, opts
+
+
+def _format_layoutlist(layout, indent=0, indent_size=2):
+    """Formats a layout list so we can pass the result to ttk::style
+    layout and ttk::style settings. Note that the layout doesn't have to
+    be a list necessarily.
+
+    E.g.:
+      [("Menubutton.background", None),
+       ("Menubutton.button", {"children":
+           [("Menubutton.focus", {"children":
+               [("Menubutton.padding", {"children":
+                [("Menubutton.label", {"side": "left", "expand": 1})]
+               })]
+           })]
+       }),
+       ("Menubutton.indicator", {"side": "right"})
+      ]
+
+      returns:
+
+      Menubutton.background
+      Menubutton.button -children {
+        Menubutton.focus -children {
+          Menubutton.padding -children {
+            Menubutton.label -side left -expand 1
+          }
+        }
+      }
+      Menubutton.indicator -side right"""
+    script = []
+
+    for layout_elem in layout:
+        elem, opts = layout_elem
+        opts = opts or {}
+        fopts = ' '.join(_format_optdict(opts, True, ("children",)))
+        head = "%s%s%s" % (' ' * indent, elem, (" %s" % fopts) if fopts else '')
+
+        if "children" in opts:
+            script.append(head + " -children {")
+            indent += indent_size
+            newscript, indent = _format_layoutlist(opts['children'], indent,
+                indent_size)
+            script.append(newscript)
+            indent -= indent_size
+            script.append('%s}' % (' ' * indent))
+        else:
+            script.append(head)
+
+    return '\n'.join(script), indent
+
+def _script_from_settings(settings):
+    """Returns an appropriate script, based on settings, according to
+    theme_settings definition to be used by theme_settings and
+    theme_create."""
+    script = []
+    # a script will be generated according to settings passed, which
+    # will then be evaluated by Tcl
+    for name, opts in settings.items():
+        # will format specific keys according to Tcl code
+        if opts.get('configure'): # format 'configure'
+            s = ' '.join(_format_optdict(opts['configure'], True))
+            script.append("ttk::style configure %s %s;" % (name, s))
+
+        if opts.get('map'): # format 'map'
+            s = ' '.join(_format_mapdict(opts['map'], True))
+            script.append("ttk::style map %s %s;" % (name, s))
+
+        if 'layout' in opts: # format 'layout' which may be empty
+            if not opts['layout']:
+                s = 'null' # could be any other word, but this one makes sense
+            else:
+                s, _ = _format_layoutlist(opts['layout'])
+            script.append("ttk::style layout %s {\n%s\n}" % (name, s))
+
+        if opts.get('element create'): # format 'element create'
+            eopts = opts['element create']
+            etype = eopts[0]
+
+            # find where args end, and where kwargs start
+            argc = 1 # etype was the first one
+            while argc < len(eopts) and not hasattr(eopts[argc], 'items'):
+                argc += 1
+
+            elemargs = eopts[1:argc]
+            elemkw = eopts[argc] if argc < len(eopts) and eopts[argc] else {}
+            specs, eopts = _format_elemcreate(etype, True, *elemargs, **elemkw)
+
+            script.append("ttk::style element create %s %s %s %s" % (
+                name, etype, specs, eopts))
+
+    return '\n'.join(script)
+
+def _list_from_statespec(stuple):
+    """Construct a list from the given statespec tuple according to the
+    accepted statespec accepted by _format_mapdict."""
+    if isinstance(stuple, str):
+        return stuple
+    result = []
+    it = iter(stuple)
+    for state, val in zip(it, it):
+        if hasattr(state, 'typename'):  # this is a Tcl object
+            state = str(state).split()
+        elif isinstance(state, str):
+            state = state.split()
+        elif not isinstance(state, (tuple, list)):
+            state = (state,)
+        if hasattr(val, 'typename'):
+            val = str(val)
+        result.append((*state, val))
+
+    return result
+
+def _list_from_layouttuple(tk, ltuple):
+    """Construct a list from the tuple returned by ttk::layout, this is
+    somewhat the reverse of _format_layoutlist."""
+    ltuple = tk.splitlist(ltuple)
+    res = []
+
+    indx = 0
+    while indx < len(ltuple):
+        name = ltuple[indx]
+        opts = {}
+        res.append((name, opts))
+        indx += 1
+
+        while indx < len(ltuple): # grab name's options
+            opt, val = ltuple[indx:indx + 2]
+            if not opt.startswith('-'): # found next name
+                break
+
+            opt = opt[1:] # remove the '-' from the option
+            indx += 2
+
+            if opt == 'children':
+                val = _list_from_layouttuple(tk, val)
+
+            opts[opt] = val
+
+    return res
+
+def _val_or_dict(tk, options, *args):
+    """Format options then call Tk command with args and options and return
+    the appropriate result.
+
+    If no option is specified, a dict is returned. If an option is
+    specified with the None value, the value for that option is returned.
+    Otherwise, the function just sets the passed options and the caller
+    shouldn't be expecting a return value anyway."""
+    options = _format_optdict(options)
+    res = tk.call(*(args + options))
+
+    if len(options) % 2: # option specified without a value, return its value
+        return res
+
+    return _splitdict(tk, res, conv=_tclobj_to_py)
+
+def _convert_stringval(value):
+    """Converts a value to, hopefully, a more appropriate Python object."""
+    value = str(value)
+    try:
+        value = int(value)
+    except (ValueError, TypeError):
+        pass
+
+    return value
+
+def _to_number(x):
+    if isinstance(x, str):
+        if '.' in x:
+            x = float(x)
+        else:
+            x = int(x)
+    return x
+
+def _tclobj_to_py(val):
+    """Return value converted from Tcl object to Python object."""
+    if val and hasattr(val, '__len__') and not isinstance(val, str):
+        if getattr(val[0], 'typename', None) == 'StateSpec':
+            val = _list_from_statespec(val)
+        else:
+            val = list(map(_convert_stringval, val))
+
+    elif hasattr(val, 'typename'): # some other (single) Tcl object
+        val = _convert_stringval(val)
+
+    if isinstance(val, tuple) and len(val) == 0:
+        return ''
+    return val
+
+def tclobjs_to_py(adict):
+    """Returns adict with its values converted from Tcl objects to Python
+    objects."""
+    for opt, val in adict.items():
+        adict[opt] = _tclobj_to_py(val)
+
+    return adict
+
+def setup_master(master=None):
+    """If master is not None, itself is returned. If master is None,
+    the default master is returned if there is one, otherwise a new
+    master is created and returned.
+
+    If it is not allowed to use the default root and master is None,
+    RuntimeError is raised."""
+    if master is None:
+        master = tkinter._get_default_root()
+    return master
+
+
+class Style(object):
+    """Manipulate style database."""
+
+    _name = "ttk::style"
+
+    def __init__(self, master=None):
+        master = setup_master(master)
+        self.master = master
+        self.tk = self.master.tk
+
+
+    def configure(self, style, query_opt=None, **kw):
+        """Query or sets the default value of the specified option(s) in
+        style.
+
+        Each key in kw is an option and each value is either a string or
+        a sequence identifying the value for that option."""
+        if query_opt is not None:
+            kw[query_opt] = None
+        result = _val_or_dict(self.tk, kw, self._name, "configure", style)
+        if result or query_opt:
+            return result
+
+
+    def map(self, style, query_opt=None, **kw):
+        """Query or sets dynamic values of the specified option(s) in
+        style.
+
+        Each key in kw is an option and each value should be a list or a
+        tuple (usually) containing statespecs grouped in tuples, or list,
+        or something else of your preference. A statespec is compound of
+        one or more states and then a value."""
+        if query_opt is not None:
+            result = self.tk.call(self._name, "map", style, '-%s' % query_opt)
+            return _list_from_statespec(self.tk.splitlist(result))
+
+        result = self.tk.call(self._name, "map", style, *_format_mapdict(kw))
+        return {k: _list_from_statespec(self.tk.splitlist(v))
+                for k, v in _splitdict(self.tk, result).items()}
+
+
+    def lookup(self, style, option, state=None, default=None):
+        """Returns the value specified for option in style.
+
+        If state is specified it is expected to be a sequence of one
+        or more states. If the default argument is set, it is used as
+        a fallback value in case no specification for option is found."""
+        state = ' '.join(state) if state else ''
+
+        return self.tk.call(self._name, "lookup", style, '-%s' % option,
+            state, default)
+
+
+    def layout(self, style, layoutspec=None):
+        """Define the widget layout for given style. If layoutspec is
+        omitted, return the layout specification for given style.
+
+        layoutspec is expected to be a list or an object different than
+        None that evaluates to False if you want to "turn off" that style.
+        If it is a list (or tuple, or something else), each item should be
+        a tuple where the first item is the layout name and the second item
+        should have the format described below:
+
+        LAYOUTS
+
+            A layout can contain the value None, if takes no options, or
+            a dict of options specifying how to arrange the element.
+            The layout mechanism uses a simplified version of the pack
+            geometry manager: given an initial cavity, each element is
+            allocated a parcel. Valid options/values are:
+
+                side: whichside
+                    Specifies which side of the cavity to place the
+                    element; one of top, right, bottom or left. If
+                    omitted, the element occupies the entire cavity.
+
+                sticky: nswe
+                    Specifies where the element is placed inside its
+                    allocated parcel.
+
+                children: [sublayout... ]
+                    Specifies a list of elements to place inside the
+                    element. Each element is a tuple (or other sequence)
+                    where the first item is the layout name, and the other
+                    is a LAYOUT."""
+        lspec = None
+        if layoutspec:
+            lspec = _format_layoutlist(layoutspec)[0]
+        elif layoutspec is not None: # will disable the layout ({}, '', etc)
+            lspec = "null" # could be any other word, but this may make sense
+                           # when calling layout(style) later
+
+        return _list_from_layouttuple(self.tk,
+            self.tk.call(self._name, "layout", style, lspec))
+
+
+    def element_create(self, elementname, etype, *args, **kw):
+        """Create a new element in the current theme of given etype."""
+        *specs, opts = _format_elemcreate(etype, False, *args, **kw)
+        self.tk.call(self._name, "element", "create", elementname, etype,
+            *specs, *opts)
+
+
+    def element_names(self):
+        """Returns the list of elements defined in the current theme."""
+        return tuple(n.lstrip('-') for n in self.tk.splitlist(
+            self.tk.call(self._name, "element", "names")))
+
+
+    def element_options(self, elementname):
+        """Return the list of elementname's options."""
+        return tuple(o.lstrip('-') for o in self.tk.splitlist(
+            self.tk.call(self._name, "element", "options", elementname)))
+
+
+    def theme_create(self, themename, parent=None, settings=None):
+        """Creates a new theme.
+
+        It is an error if themename already exists. If parent is
+        specified, the new theme will inherit styles, elements and
+        layouts from the specified parent theme. If settings are present,
+        they are expected to have the same syntax used for theme_settings."""
+        script = _script_from_settings(settings) if settings else ''
+
+        if parent:
+            self.tk.call(self._name, "theme", "create", themename,
+                "-parent", parent, "-settings", script)
+        else:
+            self.tk.call(self._name, "theme", "create", themename,
+                "-settings", script)
+
+
+    def theme_settings(self, themename, settings):
+        """Temporarily sets the current theme to themename, apply specified
+        settings and then restore the previous theme.
+
+        Each key in settings is a style and each value may contain the
+        keys 'configure', 'map', 'layout' and 'element create' and they
+        are expected to have the same format as specified by the methods
+        configure, map, layout and element_create respectively."""
+        script = _script_from_settings(settings)
+        self.tk.call(self._name, "theme", "settings", themename, script)
+
+
+    def theme_names(self):
+        """Returns a list of all known themes."""
+        return self.tk.splitlist(self.tk.call(self._name, "theme", "names"))
+
+
+    def theme_use(self, themename=None):
+        """If themename is None, returns the theme in use, otherwise, set
+        the current theme to themename, refreshes all widgets and emits
+        a <<ThemeChanged>> event."""
+        if themename is None:
+            # Starting on Tk 8.6, checking this global is no longer needed
+            # since it allows doing self.tk.call(self._name, "theme", "use")
+            return self.tk.eval("return $ttk::currentTheme")
+
+        # using "ttk::setTheme" instead of "ttk::style theme use" causes
+        # the variable currentTheme to be updated, also, ttk::setTheme calls
+        # "ttk::style theme use" in order to change theme.
+        self.tk.call("ttk::setTheme", themename)
+
+
+class Widget(tkinter.Widget):
+    """Base class for Tk themed widgets."""
+
+    def __init__(self, master, widgetname, kw=None):
+        """Constructs a Ttk Widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, takefocus, style
+
+        SCROLLABLE WIDGET OPTIONS
+
+            xscrollcommand, yscrollcommand
+
+        LABEL WIDGET OPTIONS
+
+            text, textvariable, underline, image, compound, width
+
+        WIDGET STATES
+
+            active, disabled, focus, pressed, selected, background,
+            readonly, alternate, invalid
+        """
+        master = setup_master(master)
+        tkinter.Widget.__init__(self, master, widgetname, kw=kw)
+
+
+    def identify(self, x, y):
+        """Returns the name of the element at position x, y, or the empty
+        string if the point does not lie within any element.
+
+        x and y are pixel coordinates relative to the widget."""
+        return self.tk.call(self._w, "identify", x, y)
+
+
+    def instate(self, statespec, callback=None, *args, **kw):
+        """Test the widget's state.
+
+        If callback is not specified, returns True if the widget state
+        matches statespec and False otherwise. If callback is specified,
+        then it will be invoked with *args, **kw if the widget state
+        matches statespec. statespec is expected to be a sequence."""
+        ret = self.tk.getboolean(
+                self.tk.call(self._w, "instate", ' '.join(statespec)))
+        if ret and callback is not None:
+            return callback(*args, **kw)
+
+        return ret
+
+
+    def state(self, statespec=None):
+        """Modify or inquire widget state.
+
+        Widget state is returned if statespec is None, otherwise it is
+        set according to the statespec flags and then a new state spec
+        is returned indicating which flags were changed. statespec is
+        expected to be a sequence."""
+        if statespec is not None:
+            statespec = ' '.join(statespec)
+
+        return self.tk.splitlist(str(self.tk.call(self._w, "state", statespec)))
+
+
+class Button(Widget):
+    """Ttk Button widget, displays a textual label and/or image, and
+    evaluates a command when pressed."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Button widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, compound, cursor, image, state, style, takefocus,
+            text, textvariable, underline, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, default, width
+        """
+        Widget.__init__(self, master, "ttk::button", kw)
+
+
+    def invoke(self):
+        """Invokes the command associated with the button."""
+        return self.tk.call(self._w, "invoke")
+
+
+class Checkbutton(Widget):
+    """Ttk Checkbutton widget which is either in on- or off-state."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Checkbutton widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, compound, cursor, image, state, style, takefocus,
+            text, textvariable, underline, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, offvalue, onvalue, variable
+        """
+        Widget.__init__(self, master, "ttk::checkbutton", kw)
+
+
+    def invoke(self):
+        """Toggles between the selected and deselected states and
+        invokes the associated command. If the widget is currently
+        selected, sets the option variable to the offvalue option
+        and deselects the widget; otherwise, sets the option variable
+        to the option onvalue.
+
+        Returns the result of the associated command."""
+        return self.tk.call(self._w, "invoke")
+
+
+class Entry(Widget, tkinter.Entry):
+    """Ttk Entry widget displays a one-line text string and allows that
+    string to be edited by the user."""
+
+    def __init__(self, master=None, widget=None, **kw):
+        """Constructs a Ttk Entry widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus, xscrollcommand
+
+        WIDGET-SPECIFIC OPTIONS
+
+            exportselection, invalidcommand, justify, show, state,
+            textvariable, validate, validatecommand, width
+
+        VALIDATION MODES
+
+            none, key, focus, focusin, focusout, all
+        """
+        Widget.__init__(self, master, widget or "ttk::entry", kw)
+
+
+    def bbox(self, index):
+        """Return a tuple of (x, y, width, height) which describes the
+        bounding box of the character given by index."""
+        return self._getints(self.tk.call(self._w, "bbox", index))
+
+
+    def identify(self, x, y):
+        """Returns the name of the element at position x, y, or the
+        empty string if the coordinates are outside the window."""
+        return self.tk.call(self._w, "identify", x, y)
+
+
+    def validate(self):
+        """Force revalidation, independent of the conditions specified
+        by the validate option. Returns False if validation fails, True
+        if it succeeds. Sets or clears the invalid state accordingly."""
+        return self.tk.getboolean(self.tk.call(self._w, "validate"))
+
+
+class Combobox(Entry):
+    """Ttk Combobox widget combines a text field with a pop-down list of
+    values."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Combobox widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            exportselection, justify, height, postcommand, state,
+            textvariable, values, width
+        """
+        Entry.__init__(self, master, "ttk::combobox", **kw)
+
+
+    def current(self, newindex=None):
+        """If newindex is supplied, sets the combobox value to the
+        element at position newindex in the list of values. Otherwise,
+        returns the index of the current value in the list of values
+        or -1 if the current value does not appear in the list."""
+        if newindex is None:
+            res = self.tk.call(self._w, "current")
+            if res == '':
+                return -1
+            return self.tk.getint(res)
+        return self.tk.call(self._w, "current", newindex)
+
+
+    def set(self, value):
+        """Sets the value of the combobox to value."""
+        self.tk.call(self._w, "set", value)
+
+
+class Frame(Widget):
+    """Ttk Frame widget is a container, used to group other widgets
+    together."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Frame with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            borderwidth, relief, padding, width, height
+        """
+        Widget.__init__(self, master, "ttk::frame", kw)
+
+
+class Label(Widget):
+    """Ttk Label widget displays a textual label and/or image."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Label with parent master.
+
+        STANDARD OPTIONS
+
+            class, compound, cursor, image, style, takefocus, text,
+            textvariable, underline, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            anchor, background, font, foreground, justify, padding,
+            relief, text, wraplength
+        """
+        Widget.__init__(self, master, "ttk::label", kw)
+
+
+class Labelframe(Widget):
+    """Ttk Labelframe widget is a container used to group other widgets
+    together. It has an optional label, which may be a plain text string
+    or another widget."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Labelframe with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+            labelanchor, text, underline, padding, labelwidget, width,
+            height
+        """
+        Widget.__init__(self, master, "ttk::labelframe", kw)
+
+LabelFrame = Labelframe # tkinter name compatibility
+
+
+class Menubutton(Widget):
+    """Ttk Menubutton widget displays a textual label and/or image, and
+    displays a menu when pressed."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Menubutton with parent master.
+
+        STANDARD OPTIONS
+
+            class, compound, cursor, image, state, style, takefocus,
+            text, textvariable, underline, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            direction, menu
+        """
+        Widget.__init__(self, master, "ttk::menubutton", kw)
+
+
+class Notebook(Widget):
+    """Ttk Notebook widget manages a collection of windows and displays
+    a single one at a time. Each child window is associated with a tab,
+    which the user may select to change the currently-displayed window."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Notebook with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            height, padding, width
+
+        TAB OPTIONS
+
+            state, sticky, padding, text, image, compound, underline
+
+        TAB IDENTIFIERS (tab_id)
+
+            The tab_id argument found in several methods may take any of
+            the following forms:
+
+                * An integer between zero and the number of tabs
+                * The name of a child window
+                * A positional specification of the form "@x,y", which
+                  defines the tab
+                * The string "current", which identifies the
+                  currently-selected tab
+                * The string "end", which returns the number of tabs (only
+                  valid for method index)
+        """
+        Widget.__init__(self, master, "ttk::notebook", kw)
+
+
+    def add(self, child, **kw):
+        """Adds a new tab to the notebook.
+
+        If window is currently managed by the notebook but hidden, it is
+        restored to its previous position."""
+        self.tk.call(self._w, "add", child, *(_format_optdict(kw)))
+
+
+    def forget(self, tab_id):
+        """Removes the tab specified by tab_id, unmaps and unmanages the
+        associated window."""
+        self.tk.call(self._w, "forget", tab_id)
+
+
+    def hide(self, tab_id):
+        """Hides the tab specified by tab_id.
+
+        The tab will not be displayed, but the associated window remains
+        managed by the notebook and its configuration remembered. Hidden
+        tabs may be restored with the add command."""
+        self.tk.call(self._w, "hide", tab_id)
+
+
+    def identify(self, x, y):
+        """Returns the name of the tab element at position x, y, or the
+        empty string if none."""
+        return self.tk.call(self._w, "identify", x, y)
+
+
+    def index(self, tab_id):
+        """Returns the numeric index of the tab specified by tab_id, or
+        the total number of tabs if tab_id is the string "end"."""
+        return self.tk.getint(self.tk.call(self._w, "index", tab_id))
+
+
+    def insert(self, pos, child, **kw):
+        """Inserts a pane at the specified position.
+
+        pos is either the string end, an integer index, or the name of
+        a managed child. If child is already managed by the notebook,
+        moves it to the specified position."""
+        self.tk.call(self._w, "insert", pos, child, *(_format_optdict(kw)))
+
+
+    def select(self, tab_id=None):
+        """Selects the specified tab.
+
+        The associated child window will be displayed, and the
+        previously-selected window (if different) is unmapped. If tab_id
+        is omitted, returns the widget name of the currently selected
+        pane."""
+        return self.tk.call(self._w, "select", tab_id)
+
+
+    def tab(self, tab_id, option=None, **kw):
+        """Query or modify the options of the specific tab_id.
+
+        If kw is not given, returns a dict of the tab option values. If option
+        is specified, returns the value of that option. Otherwise, sets the
+        options to the corresponding values."""
+        if option is not None:
+            kw[option] = None
+        return _val_or_dict(self.tk, kw, self._w, "tab", tab_id)
+
+
+    def tabs(self):
+        """Returns a list of windows managed by the notebook."""
+        return self.tk.splitlist(self.tk.call(self._w, "tabs") or ())
+
+
+    def enable_traversal(self):
+        """Enable keyboard traversal for a toplevel window containing
+        this notebook.
+
+        This will extend the bindings for the toplevel window containing
+        this notebook as follows:
+
+            Control-Tab: selects the tab following the currently selected
+                         one
+
+            Shift-Control-Tab: selects the tab preceding the currently
+                               selected one
+
+            Alt-K: where K is the mnemonic (underlined) character of any
+                   tab, will select that tab.
+
+        Multiple notebooks in a single toplevel may be enabled for
+        traversal, including nested notebooks. However, notebook traversal
+        only works properly if all panes are direct children of the
+        notebook."""
+        # The only, and good, difference I see is about mnemonics, which works
+        # after calling this method. Control-Tab and Shift-Control-Tab always
+        # works (here at least).
+        self.tk.call("ttk::notebook::enableTraversal", self._w)
+
+
+class Panedwindow(Widget, tkinter.PanedWindow):
+    """Ttk Panedwindow widget displays a number of subwindows, stacked
+    either vertically or horizontally."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Panedwindow with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            orient, width, height
+
+        PANE OPTIONS
+
+            weight
+        """
+        Widget.__init__(self, master, "ttk::panedwindow", kw)
+
+
+    forget = tkinter.PanedWindow.forget # overrides Pack.forget
+
+
+    def insert(self, pos, child, **kw):
+        """Inserts a pane at the specified positions.
+
+        pos is either the string end, and integer index, or the name
+        of a child. If child is already managed by the paned window,
+        moves it to the specified position."""
+        self.tk.call(self._w, "insert", pos, child, *(_format_optdict(kw)))
+
+
+    def pane(self, pane, option=None, **kw):
+        """Query or modify the options of the specified pane.
+
+        pane is either an integer index or the name of a managed subwindow.
+        If kw is not given, returns a dict of the pane option values. If
+        option is specified then the value for that option is returned.
+        Otherwise, sets the options to the corresponding values."""
+        if option is not None:
+            kw[option] = None
+        return _val_or_dict(self.tk, kw, self._w, "pane", pane)
+
+
+    def sashpos(self, index, newpos=None):
+        """If newpos is specified, sets the position of sash number index.
+
+        May adjust the positions of adjacent sashes to ensure that
+        positions are monotonically increasing. Sash positions are further
+        constrained to be between 0 and the total size of the widget.
+
+        Returns the new position of sash number index."""
+        return self.tk.getint(self.tk.call(self._w, "sashpos", index, newpos))
+
+PanedWindow = Panedwindow # tkinter name compatibility
+
+
+class Progressbar(Widget):
+    """Ttk Progressbar widget shows the status of a long-running
+    operation. They can operate in two modes: determinate mode shows the
+    amount completed relative to the total amount of work to be done, and
+    indeterminate mode provides an animated display to let the user know
+    that something is happening."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Progressbar with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            orient, length, mode, maximum, value, variable, phase
+        """
+        Widget.__init__(self, master, "ttk::progressbar", kw)
+
+
+    def start(self, interval=None):
+        """Begin autoincrement mode: schedules a recurring timer event
+        that calls method step every interval milliseconds.
+
+        interval defaults to 50 milliseconds (20 steps/second) if omitted."""
+        self.tk.call(self._w, "start", interval)
+
+
+    def step(self, amount=None):
+        """Increments the value option by amount.
+
+        amount defaults to 1.0 if omitted."""
+        self.tk.call(self._w, "step", amount)
+
+
+    def stop(self):
+        """Stop autoincrement mode: cancels any recurring timer event
+        initiated by start."""
+        self.tk.call(self._w, "stop")
+
+
+class Radiobutton(Widget):
+    """Ttk Radiobutton widgets are used in groups to show or change a
+    set of mutually-exclusive options."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Radiobutton with parent master.
+
+        STANDARD OPTIONS
+
+            class, compound, cursor, image, state, style, takefocus,
+            text, textvariable, underline, width
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, value, variable
+        """
+        Widget.__init__(self, master, "ttk::radiobutton", kw)
+
+
+    def invoke(self):
+        """Sets the option variable to the option value, selects the
+        widget, and invokes the associated command.
+
+        Returns the result of the command, or an empty string if
+        no command is specified."""
+        return self.tk.call(self._w, "invoke")
+
+
+class Scale(Widget, tkinter.Scale):
+    """Ttk Scale widget is typically used to control the numeric value of
+    a linked variable that varies uniformly over some range."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Scale with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, from, length, orient, to, value, variable
+        """
+        Widget.__init__(self, master, "ttk::scale", kw)
+
+
+    def configure(self, cnf=None, **kw):
+        """Modify or query scale options.
+
+        Setting a value for any of the "from", "from_" or "to" options
+        generates a <<RangeChanged>> event."""
+        retval = Widget.configure(self, cnf, **kw)
+        if not isinstance(cnf, (type(None), str)):
+            kw.update(cnf)
+        if any(['from' in kw, 'from_' in kw, 'to' in kw]):
+            self.event_generate('<<RangeChanged>>')
+        return retval
+
+
+    def get(self, x=None, y=None):
+        """Get the current value of the value option, or the value
+        corresponding to the coordinates x, y if they are specified.
+
+        x and y are pixel coordinates relative to the scale widget
+        origin."""
+        return self.tk.call(self._w, 'get', x, y)
+
+
+class Scrollbar(Widget, tkinter.Scrollbar):
+    """Ttk Scrollbar controls the viewport of a scrollable widget."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Scrollbar with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            command, orient
+        """
+        Widget.__init__(self, master, "ttk::scrollbar", kw)
+
+
+class Separator(Widget):
+    """Ttk Separator widget displays a horizontal or vertical separator
+    bar."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Separator with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus
+
+        WIDGET-SPECIFIC OPTIONS
+
+            orient
+        """
+        Widget.__init__(self, master, "ttk::separator", kw)
+
+
+class Sizegrip(Widget):
+    """Ttk Sizegrip allows the user to resize the containing toplevel
+    window by pressing and dragging the grip."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Sizegrip with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, state, style, takefocus
+        """
+        Widget.__init__(self, master, "ttk::sizegrip", kw)
+
+
+class Spinbox(Entry):
+    """Ttk Spinbox is an Entry with increment and decrement arrows
+
+    It is commonly used for number entry or to select from a list of
+    string values.
+    """
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Spinbox widget with the parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus, validate,
+            validatecommand, xscrollcommand, invalidcommand
+
+        WIDGET-SPECIFIC OPTIONS
+
+            to, from_, increment, values, wrap, format, command
+        """
+        Entry.__init__(self, master, "ttk::spinbox", **kw)
+
+
+    def set(self, value):
+        """Sets the value of the Spinbox to value."""
+        self.tk.call(self._w, "set", value)
+
+
+class Treeview(Widget, tkinter.XView, tkinter.YView):
+    """Ttk Treeview widget displays a hierarchical collection of items.
+
+    Each item has a textual label, an optional image, and an optional list
+    of data values. The data values are displayed in successive columns
+    after the tree label."""
+
+    def __init__(self, master=None, **kw):
+        """Construct a Ttk Treeview with parent master.
+
+        STANDARD OPTIONS
+
+            class, cursor, style, takefocus, xscrollcommand,
+            yscrollcommand
+
+        WIDGET-SPECIFIC OPTIONS
+
+            columns, displaycolumns, height, padding, selectmode, show
+
+        ITEM OPTIONS
+
+            text, image, values, open, tags
+
+        TAG OPTIONS
+
+            foreground, background, font, image
+        """
+        Widget.__init__(self, master, "ttk::treeview", kw)
+
+
+    def bbox(self, item, column=None):
+        """Returns the bounding box (relative to the treeview widget's
+        window) of the specified item in the form x y width height.
+
+        If column is specified, returns the bounding box of that cell.
+        If the item is not visible (i.e., if it is a descendant of a
+        closed item or is scrolled offscreen), returns an empty string."""
+        return self._getints(self.tk.call(self._w, "bbox", item, column)) or ''
+
+
+    def get_children(self, item=None):
+        """Returns a tuple of children belonging to item.
+
+        If item is not specified, returns root children."""
+        return self.tk.splitlist(
+                self.tk.call(self._w, "children", item or '') or ())
+
+
+    def set_children(self, item, *newchildren):
+        """Replaces item's child with newchildren.
+
+        Children present in item that are not present in newchildren
+        are detached from tree. No items in newchildren may be an
+        ancestor of item."""
+        self.tk.call(self._w, "children", item, newchildren)
+
+
+    def column(self, column, option=None, **kw):
+        """Query or modify the options for the specified column.
+
+        If kw is not given, returns a dict of the column option values. If
+        option is specified then the value for that option is returned.
+        Otherwise, sets the options to the corresponding values."""
+        if option is not None:
+            kw[option] = None
+        return _val_or_dict(self.tk, kw, self._w, "column", column)
+
+
+    def delete(self, *items):
+        """Delete all specified items and all their descendants. The root
+        item may not be deleted."""
+        self.tk.call(self._w, "delete", items)
+
+
+    def detach(self, *items):
+        """Unlinks all of the specified items from the tree.
+
+        The items and all of their descendants are still present, and may
+        be reinserted at another point in the tree, but will not be
+        displayed. The root item may not be detached."""
+        self.tk.call(self._w, "detach", items)
+
+
+    def exists(self, item):
+        """Returns True if the specified item is present in the tree,
+        False otherwise."""
+        return self.tk.getboolean(self.tk.call(self._w, "exists", item))
+
+
+    def focus(self, item=None):
+        """If item is specified, sets the focus item to item. Otherwise,
+        returns the current focus item, or '' if there is none."""
+        return self.tk.call(self._w, "focus", item)
+
+
+    def heading(self, column, option=None, **kw):
+        """Query or modify the heading options for the specified column.
+
+        If kw is not given, returns a dict of the heading option values. If
+        option is specified then the value for that option is returned.
+        Otherwise, sets the options to the corresponding values.
+
+        Valid options/values are:
+            text: text
+                The text to display in the column heading
+            image: image_name
+                Specifies an image to display to the right of the column
+                heading
+            anchor: anchor
+                Specifies how the heading text should be aligned. One of
+                the standard Tk anchor values
+            command: callback
+                A callback to be invoked when the heading label is
+                pressed.
+
+        To configure the tree column heading, call this with column = "#0" """
+        cmd = kw.get('command')
+        if cmd and not isinstance(cmd, str):
+            # callback not registered yet, do it now
+            kw['command'] = self.master.register(cmd, self._substitute)
+
+        if option is not None:
+            kw[option] = None
+
+        return _val_or_dict(self.tk, kw, self._w, 'heading', column)
+
+
+    def identify(self, component, x, y):
+        """Returns a description of the specified component under the
+        point given by x and y, or the empty string if no such component
+        is present at that position."""
+        return self.tk.call(self._w, "identify", component, x, y)
+
+
+    def identify_row(self, y):
+        """Returns the item ID of the item at position y."""
+        return self.identify("row", 0, y)
+
+
+    def identify_column(self, x):
+        """Returns the data column identifier of the cell at position x.
+
+        The tree column has ID #0."""
+        return self.identify("column", x, 0)
+
+
+    def identify_region(self, x, y):
+        """Returns one of:
+
+        heading: Tree heading area.
+        separator: Space between two columns headings;
+        tree: The tree area.
+        cell: A data cell.
+
+        * Availability: Tk 8.6"""
+        return self.identify("region", x, y)
+
+
+    def identify_element(self, x, y):
+        """Returns the element at position x, y.
+
+        * Availability: Tk 8.6"""
+        return self.identify("element", x, y)
+
+
+    def index(self, item):
+        """Returns the integer index of item within its parent's list
+        of children."""
+        return self.tk.getint(self.tk.call(self._w, "index", item))
+
+
+    def insert(self, parent, index, iid=None, **kw):
+        """Creates a new item and return the item identifier of the newly
+        created item.
+
+        parent is the item ID of the parent item, or the empty string
+        to create a new top-level item. index is an integer, or the value
+        end, specifying where in the list of parent's children to insert
+        the new item. If index is less than or equal to zero, the new node
+        is inserted at the beginning, if index is greater than or equal to
+        the current number of children, it is inserted at the end. If iid
+        is specified, it is used as the item identifier, iid must not
+        already exist in the tree. Otherwise, a new unique identifier
+        is generated."""
+        opts = _format_optdict(kw)
+        if iid is not None:
+            res = self.tk.call(self._w, "insert", parent, index,
+                "-id", iid, *opts)
+        else:
+            res = self.tk.call(self._w, "insert", parent, index, *opts)
+
+        return res
+
+
+    def item(self, item, option=None, **kw):
+        """Query or modify the options for the specified item.
+
+        If no options are given, a dict with options/values for the item
+        is returned. If option is specified then the value for that option
+        is returned. Otherwise, sets the options to the corresponding
+        values as given by kw."""
+        if option is not None:
+            kw[option] = None
+        return _val_or_dict(self.tk, kw, self._w, "item", item)
+
+
+    def move(self, item, parent, index):
+        """Moves item to position index in parent's list of children.
+
+        It is illegal to move an item under one of its descendants. If
+        index is less than or equal to zero, item is moved to the
+        beginning, if greater than or equal to the number of children,
+        it is moved to the end. If item was detached it is reattached."""
+        self.tk.call(self._w, "move", item, parent, index)
+
+    reattach = move # A sensible method name for reattaching detached items
+
+
+    def next(self, item):
+        """Returns the identifier of item's next sibling, or '' if item
+        is the last child of its parent."""
+        return self.tk.call(self._w, "next", item)
+
+
+    def parent(self, item):
+        """Returns the ID of the parent of item, or '' if item is at the
+        top level of the hierarchy."""
+        return self.tk.call(self._w, "parent", item)
+
+
+    def prev(self, item):
+        """Returns the identifier of item's previous sibling, or '' if
+        item is the first child of its parent."""
+        return self.tk.call(self._w, "prev", item)
+
+
+    def see(self, item):
+        """Ensure that item is visible.
+
+        Sets all of item's ancestors open option to True, and scrolls
+        the widget if necessary so that item is within the visible
+        portion of the tree."""
+        self.tk.call(self._w, "see", item)
+
+
+    def selection(self):
+        """Returns the tuple of selected items."""
+        return self.tk.splitlist(self.tk.call(self._w, "selection"))
+
+
+    def _selection(self, selop, items):
+        if len(items) == 1 and isinstance(items[0], (tuple, list)):
+            items = items[0]
+
+        self.tk.call(self._w, "selection", selop, items)
+
+
+    def selection_set(self, *items):
+        """The specified items becomes the new selection."""
+        self._selection("set", items)
+
+
+    def selection_add(self, *items):
+        """Add all of the specified items to the selection."""
+        self._selection("add", items)
+
+
+    def selection_remove(self, *items):
+        """Remove all of the specified items from the selection."""
+        self._selection("remove", items)
+
+
+    def selection_toggle(self, *items):
+        """Toggle the selection state of each specified item."""
+        self._selection("toggle", items)
+
+
+    def set(self, item, column=None, value=None):
+        """Query or set the value of given item.
+
+        With one argument, return a dictionary of column/value pairs
+        for the specified item. With two arguments, return the current
+        value of the specified column. With three arguments, set the
+        value of given column in given item to the specified value."""
+        res = self.tk.call(self._w, "set", item, column, value)
+        if column is None and value is None:
+            return _splitdict(self.tk, res,
+                              cut_minus=False, conv=_tclobj_to_py)
+        else:
+            return res
+
+
+    def tag_bind(self, tagname, sequence=None, callback=None):
+        """Bind a callback for the given event sequence to the tag tagname.
+        When an event is delivered to an item, the callbacks for each
+        of the item's tags option are called."""
+        self._bind((self._w, "tag", "bind", tagname), sequence, callback, add=0)
+
+
+    def tag_configure(self, tagname, option=None, **kw):
+        """Query or modify the options for the specified tagname.
+
+        If kw is not given, returns a dict of the option settings for tagname.
+        If option is specified, returns the value for that option for the
+        specified tagname. Otherwise, sets the options to the corresponding
+        values for the given tagname."""
+        if option is not None:
+            kw[option] = None
+        return _val_or_dict(self.tk, kw, self._w, "tag", "configure",
+            tagname)
+
+
+    def tag_has(self, tagname, item=None):
+        """If item is specified, returns 1 or 0 depending on whether the
+        specified item has the given tagname. Otherwise, returns a list of
+        all items which have the specified tag.
+
+        * Availability: Tk 8.6"""
+        if item is None:
+            return self.tk.splitlist(
+                self.tk.call(self._w, "tag", "has", tagname))
+        else:
+            return self.tk.getboolean(
+                self.tk.call(self._w, "tag", "has", tagname, item))
+
+
+# Extensions
+
+class LabeledScale(Frame):
+    """A Ttk Scale widget with a Ttk Label widget indicating its
+    current value.
+
+    The Ttk Scale can be accessed through instance.scale, and Ttk Label
+    can be accessed through instance.label"""
+
+    def __init__(self, master=None, variable=None, from_=0, to=10, **kw):
+        """Construct a horizontal LabeledScale with parent master, a
+        variable to be associated with the Ttk Scale widget and its range.
+        If variable is not specified, a tkinter.IntVar is created.
+
+        WIDGET-SPECIFIC OPTIONS
+
+            compound: 'top' or 'bottom'
+                Specifies how to display the label relative to the scale.
+                Defaults to 'top'.
+        """
+        self._label_top = kw.pop('compound', 'top') == 'top'
+
+        Frame.__init__(self, master, **kw)
+        self._variable = variable or tkinter.IntVar(master)
+        self._variable.set(from_)
+        self._last_valid = from_
+
+        self.label = Label(self)
+        self.scale = Scale(self, variable=self._variable, from_=from_, to=to)
+        self.scale.bind('<<RangeChanged>>', self._adjust)
+
+        # position scale and label according to the compound option
+        scale_side = 'bottom' if self._label_top else 'top'
+        label_side = 'top' if scale_side == 'bottom' else 'bottom'
+        self.scale.pack(side=scale_side, fill='x')
+        # Dummy required to make frame correct height
+        dummy = Label(self)
+        dummy.pack(side=label_side)
+        dummy.lower()
+        self.label.place(anchor='n' if label_side == 'top' else 's')
+
+        # update the label as scale or variable changes
+        self.__tracecb = self._variable.trace_add('write', self._adjust)
+        self.bind('<Configure>', self._adjust)
+        self.bind('<Map>', self._adjust)
+
+
+    def destroy(self):
+        """Destroy this widget and possibly its associated variable."""
+        try:
+            self._variable.trace_remove('write', self.__tracecb)
+        except AttributeError:
+            pass
+        else:
+            del self._variable
+        super().destroy()
+        self.label = None
+        self.scale = None
+
+
+    def _adjust(self, *args):
+        """Adjust the label position according to the scale."""
+        def adjust_label():
+            self.update_idletasks() # "force" scale redraw
+
+            x, y = self.scale.coords()
+            if self._label_top:
+                y = self.scale.winfo_y() - self.label.winfo_reqheight()
+            else:
+                y = self.scale.winfo_reqheight() + self.label.winfo_reqheight()
+
+            self.label.place_configure(x=x, y=y)
+
+        from_ = _to_number(self.scale['from'])
+        to = _to_number(self.scale['to'])
+        if to < from_:
+            from_, to = to, from_
+        newval = self._variable.get()
+        if not from_ <= newval <= to:
+            # value outside range, set value back to the last valid one
+            self.value = self._last_valid
+            return
+
+        self._last_valid = newval
+        self.label['text'] = newval
+        self.after_idle(adjust_label)
+
+    @property
+    def value(self):
+        """Return current scale value."""
+        return self._variable.get()
+
+    @value.setter
+    def value(self, val):
+        """Set new scale value."""
+        self._variable.set(val)
+
+
+class OptionMenu(Menubutton):
+    """Themed OptionMenu, based after tkinter's OptionMenu, which allows
+    the user to select a value from a menu."""
+
+    def __init__(self, master, variable, default=None, *values, **kwargs):
+        """Construct a themed OptionMenu widget with master as the parent,
+        the option textvariable set to variable, the initially selected
+        value specified by the default parameter, the menu values given by
+        *values and additional keywords.
+
+        WIDGET-SPECIFIC OPTIONS
+
+            style: stylename
+                Menubutton style.
+            direction: 'above', 'below', 'left', 'right', or 'flush'
+                Menubutton direction.
+            command: callback
+                A callback that will be invoked after selecting an item.
+        """
+        kw = {'textvariable': variable, 'style': kwargs.pop('style', None),
+              'direction': kwargs.pop('direction', None),
+              'name': kwargs.pop('name', None)}
+        Menubutton.__init__(self, master, **kw)
+        self['menu'] = tkinter.Menu(self, tearoff=False)
+
+        self._variable = variable
+        self._callback = kwargs.pop('command', None)
+        if kwargs:
+            raise tkinter.TclError('unknown option -%s' % (
+                next(iter(kwargs.keys()))))
+
+        self.set_menu(default, *values)
+
+
+    def __getitem__(self, item):
+        if item == 'menu':
+            return self.nametowidget(Menubutton.__getitem__(self, item))
+
+        return Menubutton.__getitem__(self, item)
+
+
+    def set_menu(self, default=None, *values):
+        """Build a new menu of radiobuttons with *values and optionally
+        a default value."""
+        menu = self['menu']
+        menu.delete(0, 'end')
+        for val in values:
+            menu.add_radiobutton(label=val,
+                command=(
+                    None if self._callback is None
+                    else lambda val=val: self._callback(val)
+                ),
+                variable=self._variable)
+
+        if default:
+            self._variable.set(default)
+
+
+    def destroy(self):
+        """Destroy this widget and its associated variable."""
+        try:
+            del self._variable
+        except AttributeError:
+            pass
+        super().destroy()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..ef91cb9d25dd794b2668b9557adca0601b5069f4
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/__init__.py
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: MIT
+# SPDX-FileCopyrightText: 2021 Taneli Hukkinen
+# Licensed to PSF under a Contributor Agreement.
+
+__all__ = ("loads", "load", "TOMLDecodeError")
+
+from ._parser import TOMLDecodeError, load, loads
+
+# Pretend this exception was created here.
+TOMLDecodeError.__module__ = __name__
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_parser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_parser.py
new file mode 100644
index 0000000000000000000000000000000000000000..3ee47aa9e0afbad74f6dbb1f15571c035e09f7c0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_parser.py
@@ -0,0 +1,753 @@
+# SPDX-License-Identifier: MIT
+# SPDX-FileCopyrightText: 2021 Taneli Hukkinen
+# Licensed to PSF under a Contributor Agreement.
+
+from __future__ import annotations
+
+from types import MappingProxyType
+
+from ._re import (
+    RE_DATETIME,
+    RE_LOCALTIME,
+    RE_NUMBER,
+    match_to_datetime,
+    match_to_localtime,
+    match_to_number,
+)
+
+TYPE_CHECKING = False
+if TYPE_CHECKING:
+    from collections.abc import Iterable
+    from typing import IO, Any
+
+    from ._types import Key, ParseFloat, Pos
+
+ASCII_CTRL = frozenset(chr(i) for i in range(32)) | frozenset(chr(127))
+
+# Neither of these sets include quotation mark or backslash. They are
+# currently handled as separate cases in the parser functions.
+ILLEGAL_BASIC_STR_CHARS = ASCII_CTRL - frozenset("\t")
+ILLEGAL_MULTILINE_BASIC_STR_CHARS = ASCII_CTRL - frozenset("\t\n")
+
+ILLEGAL_LITERAL_STR_CHARS = ILLEGAL_BASIC_STR_CHARS
+ILLEGAL_MULTILINE_LITERAL_STR_CHARS = ILLEGAL_MULTILINE_BASIC_STR_CHARS
+
+ILLEGAL_COMMENT_CHARS = ILLEGAL_BASIC_STR_CHARS
+
+TOML_WS = frozenset(" \t")
+TOML_WS_AND_NEWLINE = TOML_WS | frozenset("\n")
+BARE_KEY_CHARS = frozenset(
+    "abcdefghijklmnopqrstuvwxyz" "ABCDEFGHIJKLMNOPQRSTUVWXYZ" "0123456789" "-_"
+)
+KEY_INITIAL_CHARS = BARE_KEY_CHARS | frozenset("\"'")
+HEXDIGIT_CHARS = frozenset("abcdef" "ABCDEF" "0123456789")
+
+BASIC_STR_ESCAPE_REPLACEMENTS = MappingProxyType(
+    {
+        "\\b": "\u0008",  # backspace
+        "\\t": "\u0009",  # tab
+        "\\n": "\u000A",  # linefeed
+        "\\f": "\u000C",  # form feed
+        "\\r": "\u000D",  # carriage return
+        '\\"': "\u0022",  # quote
+        "\\\\": "\u005C",  # backslash
+    }
+)
+
+
+class DEPRECATED_DEFAULT:
+    """Sentinel to be used as default arg during deprecation
+    period of TOMLDecodeError's free-form arguments."""
+
+
+class TOMLDecodeError(ValueError):
+    """An error raised if a document is not valid TOML.
+
+    Adds the following attributes to ValueError:
+    msg: The unformatted error message
+    doc: The TOML document being parsed
+    pos: The index of doc where parsing failed
+    lineno: The line corresponding to pos
+    colno: The column corresponding to pos
+    """
+
+    def __init__(
+        self,
+        msg: str = DEPRECATED_DEFAULT,  # type: ignore[assignment]
+        doc: str = DEPRECATED_DEFAULT,  # type: ignore[assignment]
+        pos: Pos = DEPRECATED_DEFAULT,  # type: ignore[assignment]
+        *args: Any,
+    ):
+        if (
+            args
+            or not isinstance(msg, str)
+            or not isinstance(doc, str)
+            or not isinstance(pos, int)
+        ):
+            import warnings
+
+            warnings.warn(
+                "Free-form arguments for TOMLDecodeError are deprecated. "
+                "Please set 'msg' (str), 'doc' (str) and 'pos' (int) arguments only.",
+                DeprecationWarning,
+                stacklevel=2,
+            )
+            if pos is not DEPRECATED_DEFAULT:  # type: ignore[comparison-overlap]
+                args = pos, *args
+            if doc is not DEPRECATED_DEFAULT:  # type: ignore[comparison-overlap]
+                args = doc, *args
+            if msg is not DEPRECATED_DEFAULT:  # type: ignore[comparison-overlap]
+                args = msg, *args
+            ValueError.__init__(self, *args)
+            return
+
+        lineno = doc.count("\n", 0, pos) + 1
+        if lineno == 1:
+            colno = pos + 1
+        else:
+            colno = pos - doc.rindex("\n", 0, pos)
+
+        if pos >= len(doc):
+            coord_repr = "end of document"
+        else:
+            coord_repr = f"line {lineno}, column {colno}"
+        errmsg = f"{msg} (at {coord_repr})"
+        ValueError.__init__(self, errmsg)
+
+        self.msg = msg
+        self.doc = doc
+        self.pos = pos
+        self.lineno = lineno
+        self.colno = colno
+
+
+def load(fp: IO[bytes], /, *, parse_float: ParseFloat = float) -> dict[str, Any]:
+    """Parse TOML from a binary file object."""
+    b = fp.read()
+    try:
+        s = b.decode()
+    except AttributeError:
+        raise TypeError(
+            "File must be opened in binary mode, e.g. use `open('foo.toml', 'rb')`"
+        ) from None
+    return loads(s, parse_float=parse_float)
+
+
+def loads(s: str, /, *, parse_float: ParseFloat = float) -> dict[str, Any]:  # noqa: C901
+    """Parse TOML from a string."""
+
+    # The spec allows converting "\r\n" to "\n", even in string
+    # literals. Let's do so to simplify parsing.
+    try:
+        src = s.replace("\r\n", "\n")
+    except (AttributeError, TypeError):
+        raise TypeError(
+            f"Expected str object, not '{type(s).__qualname__}'"
+        ) from None
+    pos = 0
+    out = Output()
+    header: Key = ()
+    parse_float = make_safe_parse_float(parse_float)
+
+    # Parse one statement at a time
+    # (typically means one line in TOML source)
+    while True:
+        # 1. Skip line leading whitespace
+        pos = skip_chars(src, pos, TOML_WS)
+
+        # 2. Parse rules. Expect one of the following:
+        #    - end of file
+        #    - end of line
+        #    - comment
+        #    - key/value pair
+        #    - append dict to list (and move to its namespace)
+        #    - create dict (and move to its namespace)
+        # Skip trailing whitespace when applicable.
+        try:
+            char = src[pos]
+        except IndexError:
+            break
+        if char == "\n":
+            pos += 1
+            continue
+        if char in KEY_INITIAL_CHARS:
+            pos = key_value_rule(src, pos, out, header, parse_float)
+            pos = skip_chars(src, pos, TOML_WS)
+        elif char == "[":
+            try:
+                second_char: str | None = src[pos + 1]
+            except IndexError:
+                second_char = None
+            out.flags.finalize_pending()
+            if second_char == "[":
+                pos, header = create_list_rule(src, pos, out)
+            else:
+                pos, header = create_dict_rule(src, pos, out)
+            pos = skip_chars(src, pos, TOML_WS)
+        elif char != "#":
+            raise TOMLDecodeError("Invalid statement", src, pos)
+
+        # 3. Skip comment
+        pos = skip_comment(src, pos)
+
+        # 4. Expect end of line or end of file
+        try:
+            char = src[pos]
+        except IndexError:
+            break
+        if char != "\n":
+            raise TOMLDecodeError(
+                "Expected newline or end of document after a statement", src, pos
+            )
+        pos += 1
+
+    return out.data.dict
+
+
+class Flags:
+    """Flags that map to parsed keys/namespaces."""
+
+    # Marks an immutable namespace (inline array or inline table).
+    FROZEN = 0
+    # Marks a nest that has been explicitly created and can no longer
+    # be opened using the "[table]" syntax.
+    EXPLICIT_NEST = 1
+
+    def __init__(self) -> None:
+        self._flags: dict[str, dict[Any, Any]] = {}
+        self._pending_flags: set[tuple[Key, int]] = set()
+
+    def add_pending(self, key: Key, flag: int) -> None:
+        self._pending_flags.add((key, flag))
+
+    def finalize_pending(self) -> None:
+        for key, flag in self._pending_flags:
+            self.set(key, flag, recursive=False)
+        self._pending_flags.clear()
+
+    def unset_all(self, key: Key) -> None:
+        cont = self._flags
+        for k in key[:-1]:
+            if k not in cont:
+                return
+            cont = cont[k]["nested"]
+        cont.pop(key[-1], None)
+
+    def set(self, key: Key, flag: int, *, recursive: bool) -> None:  # noqa: A003
+        cont = self._flags
+        key_parent, key_stem = key[:-1], key[-1]
+        for k in key_parent:
+            if k not in cont:
+                cont[k] = {"flags": set(), "recursive_flags": set(), "nested": {}}
+            cont = cont[k]["nested"]
+        if key_stem not in cont:
+            cont[key_stem] = {"flags": set(), "recursive_flags": set(), "nested": {}}
+        cont[key_stem]["recursive_flags" if recursive else "flags"].add(flag)
+
+    def is_(self, key: Key, flag: int) -> bool:
+        if not key:
+            return False  # document root has no flags
+        cont = self._flags
+        for k in key[:-1]:
+            if k not in cont:
+                return False
+            inner_cont = cont[k]
+            if flag in inner_cont["recursive_flags"]:
+                return True
+            cont = inner_cont["nested"]
+        key_stem = key[-1]
+        if key_stem in cont:
+            cont = cont[key_stem]
+            return flag in cont["flags"] or flag in cont["recursive_flags"]
+        return False
+
+
+class NestedDict:
+    def __init__(self) -> None:
+        # The parsed content of the TOML document
+        self.dict: dict[str, Any] = {}
+
+    def get_or_create_nest(
+        self,
+        key: Key,
+        *,
+        access_lists: bool = True,
+    ) -> dict[str, Any]:
+        cont: Any = self.dict
+        for k in key:
+            if k not in cont:
+                cont[k] = {}
+            cont = cont[k]
+            if access_lists and isinstance(cont, list):
+                cont = cont[-1]
+            if not isinstance(cont, dict):
+                raise KeyError("There is no nest behind this key")
+        return cont  # type: ignore[no-any-return]
+
+    def append_nest_to_list(self, key: Key) -> None:
+        cont = self.get_or_create_nest(key[:-1])
+        last_key = key[-1]
+        if last_key in cont:
+            list_ = cont[last_key]
+            if not isinstance(list_, list):
+                raise KeyError("An object other than list found behind this key")
+            list_.append({})
+        else:
+            cont[last_key] = [{}]
+
+
+class Output:
+    def __init__(self) -> None:
+        self.data = NestedDict()
+        self.flags = Flags()
+
+
+def skip_chars(src: str, pos: Pos, chars: Iterable[str]) -> Pos:
+    try:
+        while src[pos] in chars:
+            pos += 1
+    except IndexError:
+        pass
+    return pos
+
+
+def skip_until(
+    src: str,
+    pos: Pos,
+    expect: str,
+    *,
+    error_on: frozenset[str],
+    error_on_eof: bool,
+) -> Pos:
+    try:
+        new_pos = src.index(expect, pos)
+    except ValueError:
+        new_pos = len(src)
+        if error_on_eof:
+            raise TOMLDecodeError(f"Expected {expect!r}", src, new_pos) from None
+
+    if not error_on.isdisjoint(src[pos:new_pos]):
+        while src[pos] not in error_on:
+            pos += 1
+        raise TOMLDecodeError(f"Found invalid character {src[pos]!r}", src, pos)
+    return new_pos
+
+
+def skip_comment(src: str, pos: Pos) -> Pos:
+    try:
+        char: str | None = src[pos]
+    except IndexError:
+        char = None
+    if char == "#":
+        return skip_until(
+            src, pos + 1, "\n", error_on=ILLEGAL_COMMENT_CHARS, error_on_eof=False
+        )
+    return pos
+
+
+def skip_comments_and_array_ws(src: str, pos: Pos) -> Pos:
+    while True:
+        pos_before_skip = pos
+        pos = skip_chars(src, pos, TOML_WS_AND_NEWLINE)
+        pos = skip_comment(src, pos)
+        if pos == pos_before_skip:
+            return pos
+
+
+def create_dict_rule(src: str, pos: Pos, out: Output) -> tuple[Pos, Key]:
+    pos += 1  # Skip "["
+    pos = skip_chars(src, pos, TOML_WS)
+    pos, key = parse_key(src, pos)
+
+    if out.flags.is_(key, Flags.EXPLICIT_NEST) or out.flags.is_(key, Flags.FROZEN):
+        raise TOMLDecodeError(f"Cannot declare {key} twice", src, pos)
+    out.flags.set(key, Flags.EXPLICIT_NEST, recursive=False)
+    try:
+        out.data.get_or_create_nest(key)
+    except KeyError:
+        raise TOMLDecodeError("Cannot overwrite a value", src, pos) from None
+
+    if not src.startswith("]", pos):
+        raise TOMLDecodeError(
+            "Expected ']' at the end of a table declaration", src, pos
+        )
+    return pos + 1, key
+
+
+def create_list_rule(src: str, pos: Pos, out: Output) -> tuple[Pos, Key]:
+    pos += 2  # Skip "[["
+    pos = skip_chars(src, pos, TOML_WS)
+    pos, key = parse_key(src, pos)
+
+    if out.flags.is_(key, Flags.FROZEN):
+        raise TOMLDecodeError(f"Cannot mutate immutable namespace {key}", src, pos)
+    # Free the namespace now that it points to another empty list item...
+    out.flags.unset_all(key)
+    # ...but this key precisely is still prohibited from table declaration
+    out.flags.set(key, Flags.EXPLICIT_NEST, recursive=False)
+    try:
+        out.data.append_nest_to_list(key)
+    except KeyError:
+        raise TOMLDecodeError("Cannot overwrite a value", src, pos) from None
+
+    if not src.startswith("]]", pos):
+        raise TOMLDecodeError(
+            "Expected ']]' at the end of an array declaration", src, pos
+        )
+    return pos + 2, key
+
+
+def key_value_rule(
+    src: str, pos: Pos, out: Output, header: Key, parse_float: ParseFloat
+) -> Pos:
+    pos, key, value = parse_key_value_pair(src, pos, parse_float)
+    key_parent, key_stem = key[:-1], key[-1]
+    abs_key_parent = header + key_parent
+
+    relative_path_cont_keys = (header + key[:i] for i in range(1, len(key)))
+    for cont_key in relative_path_cont_keys:
+        # Check that dotted key syntax does not redefine an existing table
+        if out.flags.is_(cont_key, Flags.EXPLICIT_NEST):
+            raise TOMLDecodeError(f"Cannot redefine namespace {cont_key}", src, pos)
+        # Containers in the relative path can't be opened with the table syntax or
+        # dotted key/value syntax in following table sections.
+        out.flags.add_pending(cont_key, Flags.EXPLICIT_NEST)
+
+    if out.flags.is_(abs_key_parent, Flags.FROZEN):
+        raise TOMLDecodeError(
+            f"Cannot mutate immutable namespace {abs_key_parent}", src, pos
+        )
+
+    try:
+        nest = out.data.get_or_create_nest(abs_key_parent)
+    except KeyError:
+        raise TOMLDecodeError("Cannot overwrite a value", src, pos) from None
+    if key_stem in nest:
+        raise TOMLDecodeError("Cannot overwrite a value", src, pos)
+    # Mark inline table and array namespaces recursively immutable
+    if isinstance(value, (dict, list)):
+        out.flags.set(header + key, Flags.FROZEN, recursive=True)
+    nest[key_stem] = value
+    return pos
+
+
+def parse_key_value_pair(
+    src: str, pos: Pos, parse_float: ParseFloat
+) -> tuple[Pos, Key, Any]:
+    pos, key = parse_key(src, pos)
+    try:
+        char: str | None = src[pos]
+    except IndexError:
+        char = None
+    if char != "=":
+        raise TOMLDecodeError("Expected '=' after a key in a key/value pair", src, pos)
+    pos += 1
+    pos = skip_chars(src, pos, TOML_WS)
+    pos, value = parse_value(src, pos, parse_float)
+    return pos, key, value
+
+
+def parse_key(src: str, pos: Pos) -> tuple[Pos, Key]:
+    pos, key_part = parse_key_part(src, pos)
+    key: Key = (key_part,)
+    pos = skip_chars(src, pos, TOML_WS)
+    while True:
+        try:
+            char: str | None = src[pos]
+        except IndexError:
+            char = None
+        if char != ".":
+            return pos, key
+        pos += 1
+        pos = skip_chars(src, pos, TOML_WS)
+        pos, key_part = parse_key_part(src, pos)
+        key += (key_part,)
+        pos = skip_chars(src, pos, TOML_WS)
+
+
+def parse_key_part(src: str, pos: Pos) -> tuple[Pos, str]:
+    try:
+        char: str | None = src[pos]
+    except IndexError:
+        char = None
+    if char in BARE_KEY_CHARS:
+        start_pos = pos
+        pos = skip_chars(src, pos, BARE_KEY_CHARS)
+        return pos, src[start_pos:pos]
+    if char == "'":
+        return parse_literal_str(src, pos)
+    if char == '"':
+        return parse_one_line_basic_str(src, pos)
+    raise TOMLDecodeError("Invalid initial character for a key part", src, pos)
+
+
+def parse_one_line_basic_str(src: str, pos: Pos) -> tuple[Pos, str]:
+    pos += 1
+    return parse_basic_str(src, pos, multiline=False)
+
+
+def parse_array(src: str, pos: Pos, parse_float: ParseFloat) -> tuple[Pos, list[Any]]:
+    pos += 1
+    array: list[Any] = []
+
+    pos = skip_comments_and_array_ws(src, pos)
+    if src.startswith("]", pos):
+        return pos + 1, array
+    while True:
+        pos, val = parse_value(src, pos, parse_float)
+        array.append(val)
+        pos = skip_comments_and_array_ws(src, pos)
+
+        c = src[pos : pos + 1]
+        if c == "]":
+            return pos + 1, array
+        if c != ",":
+            raise TOMLDecodeError("Unclosed array", src, pos)
+        pos += 1
+
+        pos = skip_comments_and_array_ws(src, pos)
+        if src.startswith("]", pos):
+            return pos + 1, array
+
+
+def parse_inline_table(src: str, pos: Pos, parse_float: ParseFloat) -> tuple[Pos, dict[str, Any]]:
+    pos += 1
+    nested_dict = NestedDict()
+    flags = Flags()
+
+    pos = skip_chars(src, pos, TOML_WS)
+    if src.startswith("}", pos):
+        return pos + 1, nested_dict.dict
+    while True:
+        pos, key, value = parse_key_value_pair(src, pos, parse_float)
+        key_parent, key_stem = key[:-1], key[-1]
+        if flags.is_(key, Flags.FROZEN):
+            raise TOMLDecodeError(f"Cannot mutate immutable namespace {key}", src, pos)
+        try:
+            nest = nested_dict.get_or_create_nest(key_parent, access_lists=False)
+        except KeyError:
+            raise TOMLDecodeError("Cannot overwrite a value", src, pos) from None
+        if key_stem in nest:
+            raise TOMLDecodeError(f"Duplicate inline table key {key_stem!r}", src, pos)
+        nest[key_stem] = value
+        pos = skip_chars(src, pos, TOML_WS)
+        c = src[pos : pos + 1]
+        if c == "}":
+            return pos + 1, nested_dict.dict
+        if c != ",":
+            raise TOMLDecodeError("Unclosed inline table", src, pos)
+        if isinstance(value, (dict, list)):
+            flags.set(key, Flags.FROZEN, recursive=True)
+        pos += 1
+        pos = skip_chars(src, pos, TOML_WS)
+
+
+def parse_basic_str_escape(
+    src: str, pos: Pos, *, multiline: bool = False
+) -> tuple[Pos, str]:
+    escape_id = src[pos : pos + 2]
+    pos += 2
+    if multiline and escape_id in {"\\ ", "\\\t", "\\\n"}:
+        # Skip whitespace until next non-whitespace character or end of
+        # the doc. Error if non-whitespace is found before newline.
+        if escape_id != "\\\n":
+            pos = skip_chars(src, pos, TOML_WS)
+            try:
+                char = src[pos]
+            except IndexError:
+                return pos, ""
+            if char != "\n":
+                raise TOMLDecodeError("Unescaped '\\' in a string", src, pos)
+            pos += 1
+        pos = skip_chars(src, pos, TOML_WS_AND_NEWLINE)
+        return pos, ""
+    if escape_id == "\\u":
+        return parse_hex_char(src, pos, 4)
+    if escape_id == "\\U":
+        return parse_hex_char(src, pos, 8)
+    try:
+        return pos, BASIC_STR_ESCAPE_REPLACEMENTS[escape_id]
+    except KeyError:
+        raise TOMLDecodeError("Unescaped '\\' in a string", src, pos) from None
+
+
+def parse_basic_str_escape_multiline(src: str, pos: Pos) -> tuple[Pos, str]:
+    return parse_basic_str_escape(src, pos, multiline=True)
+
+
+def parse_hex_char(src: str, pos: Pos, hex_len: int) -> tuple[Pos, str]:
+    hex_str = src[pos : pos + hex_len]
+    if len(hex_str) != hex_len or not HEXDIGIT_CHARS.issuperset(hex_str):
+        raise TOMLDecodeError("Invalid hex value", src, pos)
+    pos += hex_len
+    hex_int = int(hex_str, 16)
+    if not is_unicode_scalar_value(hex_int):
+        raise TOMLDecodeError(
+            "Escaped character is not a Unicode scalar value", src, pos
+        )
+    return pos, chr(hex_int)
+
+
+def parse_literal_str(src: str, pos: Pos) -> tuple[Pos, str]:
+    pos += 1  # Skip starting apostrophe
+    start_pos = pos
+    pos = skip_until(
+        src, pos, "'", error_on=ILLEGAL_LITERAL_STR_CHARS, error_on_eof=True
+    )
+    return pos + 1, src[start_pos:pos]  # Skip ending apostrophe
+
+
+def parse_multiline_str(src: str, pos: Pos, *, literal: bool) -> tuple[Pos, str]:
+    pos += 3
+    if src.startswith("\n", pos):
+        pos += 1
+
+    if literal:
+        delim = "'"
+        end_pos = skip_until(
+            src,
+            pos,
+            "'''",
+            error_on=ILLEGAL_MULTILINE_LITERAL_STR_CHARS,
+            error_on_eof=True,
+        )
+        result = src[pos:end_pos]
+        pos = end_pos + 3
+    else:
+        delim = '"'
+        pos, result = parse_basic_str(src, pos, multiline=True)
+
+    # Add at maximum two extra apostrophes/quotes if the end sequence
+    # is 4 or 5 chars long instead of just 3.
+    if not src.startswith(delim, pos):
+        return pos, result
+    pos += 1
+    if not src.startswith(delim, pos):
+        return pos, result + delim
+    pos += 1
+    return pos, result + (delim * 2)
+
+
+def parse_basic_str(src: str, pos: Pos, *, multiline: bool) -> tuple[Pos, str]:
+    if multiline:
+        error_on = ILLEGAL_MULTILINE_BASIC_STR_CHARS
+        parse_escapes = parse_basic_str_escape_multiline
+    else:
+        error_on = ILLEGAL_BASIC_STR_CHARS
+        parse_escapes = parse_basic_str_escape
+    result = ""
+    start_pos = pos
+    while True:
+        try:
+            char = src[pos]
+        except IndexError:
+            raise TOMLDecodeError("Unterminated string", src, pos) from None
+        if char == '"':
+            if not multiline:
+                return pos + 1, result + src[start_pos:pos]
+            if src.startswith('"""', pos):
+                return pos + 3, result + src[start_pos:pos]
+            pos += 1
+            continue
+        if char == "\\":
+            result += src[start_pos:pos]
+            pos, parsed_escape = parse_escapes(src, pos)
+            result += parsed_escape
+            start_pos = pos
+            continue
+        if char in error_on:
+            raise TOMLDecodeError(f"Illegal character {char!r}", src, pos)
+        pos += 1
+
+
+def parse_value(  # noqa: C901
+    src: str, pos: Pos, parse_float: ParseFloat
+) -> tuple[Pos, Any]:
+    try:
+        char: str | None = src[pos]
+    except IndexError:
+        char = None
+
+    # IMPORTANT: order conditions based on speed of checking and likelihood
+
+    # Basic strings
+    if char == '"':
+        if src.startswith('"""', pos):
+            return parse_multiline_str(src, pos, literal=False)
+        return parse_one_line_basic_str(src, pos)
+
+    # Literal strings
+    if char == "'":
+        if src.startswith("'''", pos):
+            return parse_multiline_str(src, pos, literal=True)
+        return parse_literal_str(src, pos)
+
+    # Booleans
+    if char == "t":
+        if src.startswith("true", pos):
+            return pos + 4, True
+    if char == "f":
+        if src.startswith("false", pos):
+            return pos + 5, False
+
+    # Arrays
+    if char == "[":
+        return parse_array(src, pos, parse_float)
+
+    # Inline tables
+    if char == "{":
+        return parse_inline_table(src, pos, parse_float)
+
+    # Dates and times
+    datetime_match = RE_DATETIME.match(src, pos)
+    if datetime_match:
+        try:
+            datetime_obj = match_to_datetime(datetime_match)
+        except ValueError as e:
+            raise TOMLDecodeError("Invalid date or datetime", src, pos) from e
+        return datetime_match.end(), datetime_obj
+    localtime_match = RE_LOCALTIME.match(src, pos)
+    if localtime_match:
+        return localtime_match.end(), match_to_localtime(localtime_match)
+
+    # Integers and "normal" floats.
+    # The regex will greedily match any type starting with a decimal
+    # char, so needs to be located after handling of dates and times.
+    number_match = RE_NUMBER.match(src, pos)
+    if number_match:
+        return number_match.end(), match_to_number(number_match, parse_float)
+
+    # Special floats
+    first_three = src[pos : pos + 3]
+    if first_three in {"inf", "nan"}:
+        return pos + 3, parse_float(first_three)
+    first_four = src[pos : pos + 4]
+    if first_four in {"-inf", "+inf", "-nan", "+nan"}:
+        return pos + 4, parse_float(first_four)
+
+    raise TOMLDecodeError("Invalid value", src, pos)
+
+
+def is_unicode_scalar_value(codepoint: int) -> bool:
+    return (0 <= codepoint <= 55295) or (57344 <= codepoint <= 1114111)
+
+
+def make_safe_parse_float(parse_float: ParseFloat) -> ParseFloat:
+    """A decorator to make `parse_float` safe.
+
+    `parse_float` must not return dicts or lists, because these types
+    would be mixed with parsed TOML tables and arrays, thus confusing
+    the parser. The returned decorated callable raises `ValueError`
+    instead of returning illegal types.
+    """
+    # The default `float` callable never returns illegal types. Optimize it.
+    if parse_float is float:
+        return float
+
+    def safe_parse_float(float_str: str) -> Any:
+        float_value = parse_float(float_str)
+        if isinstance(float_value, (dict, list)):
+            raise ValueError("parse_float must not return dicts or lists")
+        return float_value
+
+    return safe_parse_float
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_re.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_re.py
new file mode 100644
index 0000000000000000000000000000000000000000..eb8beb1974728898335fb0d1d29284489b380f01
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_re.py
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: MIT
+# SPDX-FileCopyrightText: 2021 Taneli Hukkinen
+# Licensed to PSF under a Contributor Agreement.
+
+from __future__ import annotations
+
+from datetime import date, datetime, time, timedelta, timezone, tzinfo
+from functools import lru_cache
+import re
+
+TYPE_CHECKING = False
+if TYPE_CHECKING:
+    from typing import Any
+
+    from ._types import ParseFloat
+
+# E.g.
+# - 00:32:00.999999
+# - 00:32:00
+_TIME_RE_STR = r"([01][0-9]|2[0-3]):([0-5][0-9]):([0-5][0-9])(?:\.([0-9]{1,6})[0-9]*)?"
+
+RE_NUMBER = re.compile(
+    r"""
+0
+(?:
+    x[0-9A-Fa-f](?:_?[0-9A-Fa-f])*   # hex
+    |
+    b[01](?:_?[01])*                 # bin
+    |
+    o[0-7](?:_?[0-7])*               # oct
+)
+|
+[+-]?(?:0|[1-9](?:_?[0-9])*)         # dec, integer part
+(?P<floatpart>
+    (?:\.[0-9](?:_?[0-9])*)?         # optional fractional part
+    (?:[eE][+-]?[0-9](?:_?[0-9])*)?  # optional exponent part
+)
+""",
+    flags=re.VERBOSE,
+)
+RE_LOCALTIME = re.compile(_TIME_RE_STR)
+RE_DATETIME = re.compile(
+    rf"""
+([0-9]{{4}})-(0[1-9]|1[0-2])-(0[1-9]|[12][0-9]|3[01])  # date, e.g. 1988-10-27
+(?:
+    [Tt ]
+    {_TIME_RE_STR}
+    (?:([Zz])|([+-])([01][0-9]|2[0-3]):([0-5][0-9]))?  # optional time offset
+)?
+""",
+    flags=re.VERBOSE,
+)
+
+
+def match_to_datetime(match: re.Match[str]) -> datetime | date:
+    """Convert a `RE_DATETIME` match to `datetime.datetime` or `datetime.date`.
+
+    Raises ValueError if the match does not correspond to a valid date
+    or datetime.
+    """
+    (
+        year_str,
+        month_str,
+        day_str,
+        hour_str,
+        minute_str,
+        sec_str,
+        micros_str,
+        zulu_time,
+        offset_sign_str,
+        offset_hour_str,
+        offset_minute_str,
+    ) = match.groups()
+    year, month, day = int(year_str), int(month_str), int(day_str)
+    if hour_str is None:
+        return date(year, month, day)
+    hour, minute, sec = int(hour_str), int(minute_str), int(sec_str)
+    micros = int(micros_str.ljust(6, "0")) if micros_str else 0
+    if offset_sign_str:
+        tz: tzinfo | None = cached_tz(
+            offset_hour_str, offset_minute_str, offset_sign_str
+        )
+    elif zulu_time:
+        tz = timezone.utc
+    else:  # local date-time
+        tz = None
+    return datetime(year, month, day, hour, minute, sec, micros, tzinfo=tz)
+
+
+# No need to limit cache size. This is only ever called on input
+# that matched RE_DATETIME, so there is an implicit bound of
+# 24 (hours) * 60 (minutes) * 2 (offset direction) = 2880.
+@lru_cache(maxsize=None)
+def cached_tz(hour_str: str, minute_str: str, sign_str: str) -> timezone:
+    sign = 1 if sign_str == "+" else -1
+    return timezone(
+        timedelta(
+            hours=sign * int(hour_str),
+            minutes=sign * int(minute_str),
+        )
+    )
+
+
+def match_to_localtime(match: re.Match[str]) -> time:
+    hour_str, minute_str, sec_str, micros_str = match.groups()
+    micros = int(micros_str.ljust(6, "0")) if micros_str else 0
+    return time(int(hour_str), int(minute_str), int(sec_str), micros)
+
+
+def match_to_number(match: re.Match[str], parse_float: ParseFloat) -> Any:
+    if match.group("floatpart"):
+        return parse_float(match.group())
+    return int(match.group(), 0)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_types.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_types.py
new file mode 100644
index 0000000000000000000000000000000000000000..d949412e03b29d70592c7721fe747e5085c2e280
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/_types.py
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: MIT
+# SPDX-FileCopyrightText: 2021 Taneli Hukkinen
+# Licensed to PSF under a Contributor Agreement.
+
+from typing import Any, Callable, Tuple
+
+# Type annotations
+ParseFloat = Callable[[str], Any]
+Key = Tuple[str, ...]
+Pos = int
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/mypy.ini b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/mypy.ini
new file mode 100644
index 0000000000000000000000000000000000000000..1761dce45562a602c6a9a6254a56136354e20f88
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/tomllib/mypy.ini
@@ -0,0 +1,17 @@
+# Config file for running mypy on tomllib.
+# Run mypy by invoking `mypy --config-file Lib/tomllib/mypy.ini`
+# on the command-line from the repo root
+
+[mypy]
+files = Lib/tomllib
+mypy_path = $MYPY_CONFIG_FILE_DIR/../../Misc/mypy
+explicit_package_bases = True
+python_version = 3.12
+pretty = True
+
+# Enable most stricter settings
+enable_error_code = ignore-without-code
+strict = True
+strict_bytes = True
+local_partial_types = True
+warn_unreachable = True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..77150e25331cc4b31d3fd64c9ed079dc880e8356
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__init__.py
@@ -0,0 +1,14 @@
+"""
+    --------------------------------------
+        About this viewer
+    --------------------------------------
+
+    Tiny demo viewer to view turtle graphics example scripts.
+
+    Quickly and dirtyly assembled by Gregor Lingl.
+    June, 2006
+
+    For more information see: turtledemo - Help
+
+    Have fun!
+"""
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..7c2d753f4c311132a957a9d7d852348dcb383b16
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/__main__.py
@@ -0,0 +1,399 @@
+"""
+  ----------------------------------------------
+      turtleDemo - Help
+  ----------------------------------------------
+
+  This document has two sections:
+
+  (1) How to use the demo viewer
+  (2) How to add your own demos to the demo repository
+
+
+  (1) How to use the demo viewer.
+
+  Select a demoscript from the example menu.
+  The (syntax colored) source code appears in the left
+  source code window. IT CANNOT BE EDITED, but ONLY VIEWED!
+
+  The demo viewer windows can be resized. The divider between text
+  and canvas can be moved by grabbing it with the mouse. The text font
+  size can be changed from the menu and with Control/Command '-'/'+'.
+  It can also be changed on most systems with Control-mousewheel
+  when the mouse is over the text.
+
+  Press START button to start the demo.
+  Stop execution by pressing the STOP button.
+  Clear screen by pressing the CLEAR button.
+  Restart by pressing the START button again.
+
+  SPECIAL demos, such as clock.py are those which run EVENTDRIVEN.
+
+      Press START button to start the demo.
+
+      - Until the EVENTLOOP is entered everything works
+      as in an ordinary demo script.
+
+      - When the EVENTLOOP is entered, you control the
+      application by using the mouse and/or keys (or it's
+      controlled by some timer events)
+      To stop it you can and must press the STOP button.
+
+      While the EVENTLOOP is running, the examples menu is disabled.
+
+      - Only after having pressed the STOP button, you may
+      restart it or choose another example script.
+
+   * * * * * * * *
+   In some rare situations there may occur interferences/conflicts
+   between events concerning the demo script and those concerning the
+   demo-viewer. (They run in the same process.) Strange behaviour may be
+   the consequence and in the worst case you must close and restart the
+   viewer.
+   * * * * * * * *
+
+
+   (2) How to add your own demos to the demo repository
+
+   - Place the file in the same directory as turtledemo/__main__.py
+     IMPORTANT! When imported, the demo should not modify the system
+     by calling functions in other modules, such as sys, tkinter, or
+     turtle. Global variables should be initialized in main().
+
+   - The code must contain a main() function which will
+     be executed by the viewer (see provided example scripts).
+     It may return a string which will be displayed in the Label below
+     the source code window (when execution has finished.)
+
+   - In order to run mydemo.py by itself, such as during development,
+     add the following at the end of the file:
+
+    if __name__ == '__main__':
+        main()
+        mainloop()  # keep window open
+
+    python -m turtledemo.mydemo  # will then run it
+
+   - If the demo is EVENT DRIVEN, main must return the string
+     "EVENTLOOP". This informs the demo viewer that the script is
+     still running and must be stopped by the user!
+
+     If an "EVENTLOOP" demo runs by itself, as with clock, which uses
+     ontimer, or minimal_hanoi, which loops by recursion, then the
+     code should catch the turtle.Terminator exception that will be
+     raised when the user presses the STOP button.  (Paint is not such
+     a demo; it only acts in response to mouse clicks and movements.)
+"""
+import sys
+import os
+
+from tkinter import *
+from idlelib.colorizer import ColorDelegator, color_config
+from idlelib.percolator import Percolator
+from idlelib.textview import view_text
+import turtle
+from turtledemo import __doc__ as about_turtledemo
+
+if sys.platform == 'win32':
+    from idlelib.util import fix_win_hidpi
+    fix_win_hidpi()
+
+demo_dir = os.path.dirname(os.path.abspath(__file__))
+darwin = sys.platform == 'darwin'
+STARTUP = 1
+READY = 2
+RUNNING = 3
+DONE = 4
+EVENTDRIVEN = 5
+
+btnfont = ("Arial", 12, 'bold')
+txtfont = ['Lucida Console', 10, 'normal']
+
+MINIMUM_FONT_SIZE = 6
+MAXIMUM_FONT_SIZE = 100
+font_sizes = [8, 9, 10, 11, 12, 14, 18, 20, 22, 24, 30]
+
+def getExampleEntries():
+    return [entry[:-3] for entry in os.listdir(demo_dir) if
+            entry.endswith(".py") and entry[0] != '_']
+
+help_entries = (  # (help_label,  help_doc)
+    ('Turtledemo help', __doc__),
+    ('About turtledemo', about_turtledemo),
+    ('About turtle module', turtle.__doc__),
+    )
+
+
+class DemoWindow(object):
+
+    def __init__(self, filename=None):
+        self.root = root = turtle._root = Tk()
+        root.title('Python turtle-graphics examples')
+        root.wm_protocol("WM_DELETE_WINDOW", self._destroy)
+
+        if darwin:
+            import subprocess
+            # Make sure we are the currently activated OS X application
+            # so that our menu bar appears.
+            subprocess.run(
+                    [
+                        '/usr/bin/osascript',
+                        '-e', 'tell application "System Events"',
+                        '-e', 'set frontmost of the first process whose '
+                              'unix id is {} to true'.format(os.getpid()),
+                        '-e', 'end tell',
+                    ],
+                    stderr=subprocess.DEVNULL,
+                    stdout=subprocess.DEVNULL,)
+
+        root.grid_rowconfigure(0, weight=1)
+        root.grid_columnconfigure(0, weight=1)
+        root.grid_columnconfigure(1, minsize=90, weight=1)
+        root.grid_columnconfigure(2, minsize=90, weight=1)
+        root.grid_columnconfigure(3, minsize=90, weight=1)
+
+        self.mBar = Menu(root, relief=RAISED, borderwidth=2)
+        self.mBar.add_cascade(menu=self.makeLoadDemoMenu(self.mBar),
+                              label='Examples', underline=0)
+        self.mBar.add_cascade(menu=self.makeFontMenu(self.mBar),
+                              label='Fontsize', underline=0)
+        self.mBar.add_cascade(menu=self.makeHelpMenu(self.mBar),
+                              label='Help', underline=0)
+        root['menu'] = self.mBar
+
+        pane = PanedWindow(root, orient=HORIZONTAL, sashwidth=5,
+                           sashrelief=SOLID, bg='#ddd')
+        pane.add(self.makeTextFrame(pane))
+        pane.add(self.makeGraphFrame(pane))
+        pane.grid(row=0, columnspan=4, sticky='news')
+
+        self.output_lbl = Label(root, height= 1, text=" --- ", bg="#ddf",
+                                font=("Arial", 16, 'normal'), borderwidth=2,
+                                relief=RIDGE)
+        if darwin:  # Leave Mac button colors alone - #44254.
+            self.start_btn = Button(root, text=" START ", font=btnfont,
+                                    fg='#00cc22', command=self.startDemo)
+            self.stop_btn = Button(root, text=" STOP ", font=btnfont,
+                                   fg='#00cc22', command=self.stopIt)
+            self.clear_btn = Button(root, text=" CLEAR ", font=btnfont,
+                                    fg='#00cc22', command = self.clearCanvas)
+        else:
+            self.start_btn = Button(root, text=" START ", font=btnfont,
+                                    fg="white", disabledforeground = "#fed",
+                                    command=self.startDemo)
+            self.stop_btn = Button(root, text=" STOP ", font=btnfont,
+                                   fg="white", disabledforeground = "#fed",
+                                   command=self.stopIt)
+            self.clear_btn = Button(root, text=" CLEAR ", font=btnfont,
+                                    fg="white", disabledforeground="#fed",
+                                    command = self.clearCanvas)
+        self.output_lbl.grid(row=1, column=0, sticky='news', padx=(0,5))
+        self.start_btn.grid(row=1, column=1, sticky='ew')
+        self.stop_btn.grid(row=1, column=2, sticky='ew')
+        self.clear_btn.grid(row=1, column=3, sticky='ew')
+
+        Percolator(self.text).insertfilter(ColorDelegator())
+        self.dirty = False
+        self.exitflag = False
+        if filename:
+            self.loadfile(filename)
+        self.configGUI(DISABLED, DISABLED, DISABLED,
+                       "Choose example from menu", "black")
+        self.state = STARTUP
+
+
+    def onResize(self, event):
+        cwidth = self.canvas.winfo_width()
+        cheight = self.canvas.winfo_height()
+        self.canvas.xview_moveto(0.5*(self.canvwidth-cwidth)/self.canvwidth)
+        self.canvas.yview_moveto(0.5*(self.canvheight-cheight)/self.canvheight)
+
+    def makeTextFrame(self, root):
+        self.text_frame = text_frame = Frame(root)
+        self.text = text = Text(text_frame, name='text', padx=5,
+                                wrap='none', width=45)
+        color_config(text)
+
+        self.vbar = vbar = Scrollbar(text_frame, name='vbar')
+        vbar['command'] = text.yview
+        vbar.pack(side=RIGHT, fill=Y)
+        self.hbar = hbar = Scrollbar(text_frame, name='hbar', orient=HORIZONTAL)
+        hbar['command'] = text.xview
+        hbar.pack(side=BOTTOM, fill=X)
+        text['yscrollcommand'] = vbar.set
+        text['xscrollcommand'] = hbar.set
+
+        text['font'] = tuple(txtfont)
+        shortcut = 'Command' if darwin else 'Control'
+        text.bind_all('<%s-minus>' % shortcut, self.decrease_size)
+        text.bind_all('<%s-underscore>' % shortcut, self.decrease_size)
+        text.bind_all('<%s-equal>' % shortcut, self.increase_size)
+        text.bind_all('<%s-plus>' % shortcut, self.increase_size)
+        text.bind('<Control-MouseWheel>', self.update_mousewheel)
+        text.bind('<Control-Button-4>', self.increase_size)
+        text.bind('<Control-Button-5>', self.decrease_size)
+
+        text.pack(side=LEFT, fill=BOTH, expand=1)
+        return text_frame
+
+    def makeGraphFrame(self, root):
+        # t._Screen is a singleton class instantiated or retrieved
+        # by calling Screen.  Since tdemo canvas needs a different
+        # configuration, we manually set class attributes before
+        # calling Screen and manually call superclass init after.
+        turtle._Screen._root = root
+
+        self.canvwidth = 1000
+        self.canvheight = 800
+        turtle._Screen._canvas = self.canvas = canvas = turtle.ScrolledCanvas(
+                root, 800, 600, self.canvwidth, self.canvheight)
+        canvas.adjustScrolls()
+        canvas._rootwindow.bind('<Configure>', self.onResize)
+        canvas._canvas['borderwidth'] = 0
+
+        self.screen = screen = turtle.Screen()
+        turtle.TurtleScreen.__init__(screen, canvas)
+        turtle.RawTurtle.screens = [screen]
+        return canvas
+
+    def set_txtsize(self, size):
+        txtfont[1] = size
+        self.text['font'] = tuple(txtfont)
+        self.output_lbl['text'] = 'Font size %d' % size
+
+    def decrease_size(self, dummy=None):
+        self.set_txtsize(max(txtfont[1] - 1, MINIMUM_FONT_SIZE))
+        return 'break'
+
+    def increase_size(self, dummy=None):
+        self.set_txtsize(min(txtfont[1] + 1, MAXIMUM_FONT_SIZE))
+        return 'break'
+
+    def update_mousewheel(self, event):
+        # For wheel up, event.delta = 120 on Windows, -1 on darwin.
+        # X-11 sends Control-Button-4 event instead.
+        if (event.delta < 0) == (not darwin):
+            return self.decrease_size()
+        else:
+            return self.increase_size()
+
+    def configGUI(self, start, stop, clear, txt="", color="blue"):
+        if darwin:  # Leave Mac button colors alone - #44254.
+            self.start_btn.config(state=start)
+            self.stop_btn.config(state=stop)
+            self.clear_btn.config(state=clear)
+        else:
+            self.start_btn.config(state=start,
+                                  bg="#d00" if start == NORMAL else "#fca")
+            self.stop_btn.config(state=stop,
+                                 bg="#d00" if stop == NORMAL else "#fca")
+            self.clear_btn.config(state=clear,
+                                  bg="#d00" if clear == NORMAL else "#fca")
+        self.output_lbl.config(text=txt, fg=color)
+
+    def makeLoadDemoMenu(self, master):
+        menu = Menu(master, tearoff=1)  # TJR: leave this one.
+
+        for entry in getExampleEntries():
+            def load(entry=entry):
+                self.loadfile(entry)
+            menu.add_command(label=entry, underline=0, command=load)
+        return menu
+
+    def makeFontMenu(self, master):
+        menu = Menu(master, tearoff=0)
+        menu.add_command(label="Decrease", command=self.decrease_size,
+                         accelerator=f"{'Command' if darwin else 'Ctrl'}+-")
+        menu.add_command(label="Increase", command=self.increase_size,
+                         accelerator=f"{'Command' if darwin else 'Ctrl'}+=")
+        menu.add_separator()
+
+        for size in font_sizes:
+            def resize(size=size):
+                self.set_txtsize(size)
+            menu.add_command(label=str(size), underline=0, command=resize)
+        return menu
+
+    def makeHelpMenu(self, master):
+        menu = Menu(master, tearoff=0)
+
+        for help_label, help_file in help_entries:
+            def show(help_label=help_label, help_file=help_file):
+                view_text(self.root, help_label, help_file)
+            menu.add_command(label=help_label, command=show)
+        return menu
+
+    def refreshCanvas(self):
+        if self.dirty:
+            self.screen.clear()
+            self.dirty=False
+
+    def loadfile(self, filename):
+        self.clearCanvas()
+        turtle.TurtleScreen._RUNNING = False
+        modname = 'turtledemo.' + filename
+        __import__(modname)
+        self.module = sys.modules[modname]
+        with open(self.module.__file__, 'r') as f:
+            chars = f.read()
+        self.text.delete("1.0", "end")
+        self.text.insert("1.0", chars)
+        self.root.title(filename + " - a Python turtle graphics example")
+        self.configGUI(NORMAL, DISABLED, DISABLED,
+                       "Press start button", "red")
+        self.state = READY
+
+    def startDemo(self):
+        self.refreshCanvas()
+        self.dirty = True
+        turtle.TurtleScreen._RUNNING = True
+        self.configGUI(DISABLED, NORMAL, DISABLED,
+                       "demo running...", "black")
+        self.screen.clear()
+        self.screen.mode("standard")
+        self.state = RUNNING
+
+        try:
+            result = self.module.main()
+            if result == "EVENTLOOP":
+                self.state = EVENTDRIVEN
+            else:
+                self.state = DONE
+        except turtle.Terminator:
+            if self.root is None:
+                return
+            self.state = DONE
+            result = "stopped!"
+        if self.state == DONE:
+            self.configGUI(NORMAL, DISABLED, NORMAL,
+                           result)
+        elif self.state == EVENTDRIVEN:
+            self.exitflag = True
+            self.configGUI(DISABLED, NORMAL, DISABLED,
+                           "use mouse/keys or STOP", "red")
+
+    def clearCanvas(self):
+        self.refreshCanvas()
+        self.screen._delete("all")
+        self.canvas.config(cursor="")
+        self.configGUI(NORMAL, DISABLED, DISABLED)
+
+    def stopIt(self):
+        if self.exitflag:
+            self.clearCanvas()
+            self.exitflag = False
+            self.configGUI(NORMAL, DISABLED, DISABLED,
+                           "STOPPED!", "red")
+        turtle.TurtleScreen._RUNNING = False
+
+    def _destroy(self):
+        turtle.TurtleScreen._RUNNING = False
+        self.root.destroy()
+        self.root = None
+
+
+def main():
+    demo = DemoWindow()
+    demo.root.mainloop()
+
+if __name__ == '__main__':
+    main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/bytedesign.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/bytedesign.py
new file mode 100644
index 0000000000000000000000000000000000000000..a5d76a6b6ff2957887c739ae48ee7dd9ff2d3650
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/bytedesign.py
@@ -0,0 +1,158 @@
+"""turtledemo/bytedesign.py
+
+An example adapted from the example-suite
+of PythonCard's turtle graphics.
+
+It's based on an article in BYTE magazine
+Problem Solving with Logo: Using Turtle
+Graphics to Redraw a Design
+November 1982, p. 118 - 134
+
+-------------------------------------------
+
+Due to the statement
+
+t.delay(0)
+
+in line 152, which sets the animation delay
+to 0, this animation runs in "line per line"
+mode as fast as possible.
+"""
+
+from turtle import Turtle, mainloop
+from time import perf_counter as clock
+
+# wrapper for any additional drawing routines
+# that need to know about each other
+class Designer(Turtle):
+
+    def design(self, homePos, scale):
+        self.up()
+        for i in range(5):
+            self.forward(64.65 * scale)
+            self.down()
+            self.wheel(self.position(), scale)
+            self.up()
+            self.backward(64.65 * scale)
+            self.right(72)
+        self.up()
+        self.goto(homePos)
+        self.right(36)
+        self.forward(24.5 * scale)
+        self.right(198)
+        self.down()
+        self.centerpiece(46 * scale, 143.4, scale)
+        self.getscreen().tracer(True)
+
+    def wheel(self, initpos, scale):
+        self.right(54)
+        for i in range(4):
+            self.pentpiece(initpos, scale)
+        self.down()
+        self.left(36)
+        for i in range(5):
+            self.tripiece(initpos, scale)
+        self.left(36)
+        for i in range(5):
+            self.down()
+            self.right(72)
+            self.forward(28 * scale)
+            self.up()
+            self.backward(28 * scale)
+        self.left(54)
+        self.getscreen().update()
+
+    def tripiece(self, initpos, scale):
+        oldh = self.heading()
+        self.down()
+        self.backward(2.5 * scale)
+        self.tripolyr(31.5 * scale, scale)
+        self.up()
+        self.goto(initpos)
+        self.setheading(oldh)
+        self.down()
+        self.backward(2.5 * scale)
+        self.tripolyl(31.5 * scale, scale)
+        self.up()
+        self.goto(initpos)
+        self.setheading(oldh)
+        self.left(72)
+        self.getscreen().update()
+
+    def pentpiece(self, initpos, scale):
+        oldh = self.heading()
+        self.up()
+        self.forward(29 * scale)
+        self.down()
+        for i in range(5):
+            self.forward(18 * scale)
+            self.right(72)
+        self.pentr(18 * scale, 75, scale)
+        self.up()
+        self.goto(initpos)
+        self.setheading(oldh)
+        self.forward(29 * scale)
+        self.down()
+        for i in range(5):
+            self.forward(18 * scale)
+            self.right(72)
+        self.pentl(18 * scale, 75, scale)
+        self.up()
+        self.goto(initpos)
+        self.setheading(oldh)
+        self.left(72)
+        self.getscreen().update()
+
+    def pentl(self, side, ang, scale):
+        if side < (2 * scale): return
+        self.forward(side)
+        self.left(ang)
+        self.pentl(side - (.38 * scale), ang, scale)
+
+    def pentr(self, side, ang, scale):
+        if side < (2 * scale): return
+        self.forward(side)
+        self.right(ang)
+        self.pentr(side - (.38 * scale), ang, scale)
+
+    def tripolyr(self, side, scale):
+        if side < (4 * scale): return
+        self.forward(side)
+        self.right(111)
+        self.forward(side / 1.78)
+        self.right(111)
+        self.forward(side / 1.3)
+        self.right(146)
+        self.tripolyr(side * .75, scale)
+
+    def tripolyl(self, side, scale):
+        if side < (4 * scale): return
+        self.forward(side)
+        self.left(111)
+        self.forward(side / 1.78)
+        self.left(111)
+        self.forward(side / 1.3)
+        self.left(146)
+        self.tripolyl(side * .75, scale)
+
+    def centerpiece(self, s, a, scale):
+        self.forward(s); self.left(a)
+        if s < (7.5 * scale):
+            return
+        self.centerpiece(s - (1.2 * scale), a, scale)
+
+def main():
+    t = Designer()
+    t.speed(0)
+    t.hideturtle()
+    t.getscreen().delay(0)
+    t.getscreen().tracer(0)
+    at = clock()
+    t.design(t.position(), 2)
+    et = clock()
+    return "runtime: %.2f sec." % (et-at)
+
+if __name__ == '__main__':
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/chaos.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/chaos.py
new file mode 100644
index 0000000000000000000000000000000000000000..b25f0fa42c901dbce42907f3d38096f24ba9727a
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/chaos.py
@@ -0,0 +1,57 @@
+"""turtledemo/chaos.py
+
+A demonstration of chaos.
+"""
+from turtle import *
+
+N = 80
+
+def f(x):
+    return 3.9*x*(1-x)
+
+def g(x):
+    return 3.9*(x-x**2)
+
+def h(x):
+    return 3.9*x-3.9*x*x
+
+def jumpto(x, y):
+    penup(); goto(x,y)
+
+def line(x1, y1, x2, y2):
+    jumpto(x1, y1)
+    pendown()
+    goto(x2, y2)
+
+def coosys():
+    line(-1, 0, N+1, 0)
+    line(0, -0.1, 0, 1.1)
+
+def plot(fun, start, color):
+    pencolor(color)
+    x = start
+    jumpto(0, x)
+    pendown()
+    dot(5)
+    for i in range(N):
+        x=fun(x)
+        goto(i+1,x)
+        dot(5)
+
+def main():
+    reset()
+    setworldcoordinates(-1.0,-0.1, N+1, 1.1)
+    speed(0)
+    hideturtle()
+    coosys()
+    plot(f, 0.35, "blue")
+    plot(g, 0.35, "green")
+    plot(h, 0.35, "red")
+    # Now zoom in:
+    for s in range(100):
+        setworldcoordinates(0.5*s,-0.1, N+1, 1.1)
+    return "Done!"
+
+if __name__ == "__main__":
+    main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/clock.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/clock.py
new file mode 100644
index 0000000000000000000000000000000000000000..8b639066c4f440daba905d09840f5c9097c7b9a2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/clock.py
@@ -0,0 +1,132 @@
+"""turtledemo/clock.py
+
+Enhanced clock-program, showing date
+and time.
+"""
+from turtle import *
+from datetime import datetime
+
+dtfont = "TkFixedFont", 14, "bold"
+current_day = None
+
+def jump(distanz, winkel=0):
+    penup()
+    right(winkel)
+    forward(distanz)
+    left(winkel)
+    pendown()
+
+def hand(laenge, spitze):
+    fd(laenge*1.15)
+    rt(90)
+    fd(spitze/2.0)
+    lt(120)
+    fd(spitze)
+    lt(120)
+    fd(spitze)
+    lt(120)
+    fd(spitze/2.0)
+
+def make_hand_shape(name, laenge, spitze):
+    reset()
+    jump(-laenge*0.15)
+    begin_poly()
+    hand(laenge, spitze)
+    end_poly()
+    hand_form = get_poly()
+    register_shape(name, hand_form)
+
+def clockface(radius):
+    reset()
+    pensize(7)
+    for i in range(60):
+        jump(radius)
+        if i % 5 == 0:
+            fd(25)
+            jump(-radius-25)
+        else:
+            dot(3)
+            jump(-radius)
+        rt(6)
+
+def display_date_time():
+    global current_day
+    writer.clear()
+    now = datetime.now()
+    current_day = now.day
+    writer.home()
+    writer.forward(distance=65)
+    writer.write(wochentag(now), align="center", font=dtfont)
+    writer.back(distance=150)
+    writer.write(datum(now), align="center", font=dtfont)
+    writer.forward(distance=85)
+
+def setup():
+    global second_hand, minute_hand, hour_hand, writer
+    mode("logo")
+    make_hand_shape("second_hand", 125, 25)
+    make_hand_shape("minute_hand",  115, 25)
+    make_hand_shape("hour_hand", 90, 25)
+    clockface(160)
+    second_hand = Turtle()
+    second_hand.shape("second_hand")
+    second_hand.color("gray20", "gray80")
+    minute_hand = Turtle()
+    minute_hand.shape("minute_hand")
+    minute_hand.color("blue1", "red1")
+    hour_hand = Turtle()
+    hour_hand.shape("hour_hand")
+    hour_hand.color("blue3", "red3")
+    for hand in second_hand, minute_hand, hour_hand:
+        hand.resizemode("user")
+        hand.shapesize(1, 1, 3)
+        hand.speed(0)
+    ht()
+    writer = Turtle()
+    writer.ht()
+    writer.pu()
+    writer.bk(85)
+    display_date_time()
+
+def wochentag(t):
+    wochentag = ["Monday", "Tuesday", "Wednesday",
+        "Thursday", "Friday", "Saturday", "Sunday"]
+    return wochentag[t.weekday()]
+
+def datum(z):
+    monat = ["Jan.", "Feb.", "Mar.", "Apr.", "May", "June",
+             "July", "Aug.", "Sep.", "Oct.", "Nov.", "Dec."]
+    j = z.year
+    m = monat[z.month - 1]
+    t = z.day
+    return "%s %d %d" % (m, t, j)
+
+def tick():
+    t = datetime.today()
+    sekunde = t.second + t.microsecond*0.000001
+    minute = t.minute + sekunde/60.0
+    stunde = t.hour + minute/60.0
+    try:
+        tracer(False)  # Terminator can occur here
+        second_hand.setheading(6*sekunde)  # or here
+        minute_hand.setheading(6*minute)
+        hour_hand.setheading(30*stunde)
+        if t.day != current_day:
+            display_date_time()
+        tracer(True)
+        ontimer(tick, 100)
+    except Terminator:
+        pass  # turtledemo user pressed STOP
+
+def main():
+    tracer(False)
+    setup()
+    tracer(True)
+    tick()
+    return "EVENTLOOP"
+
+if __name__ == "__main__":
+    mode("logo")
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/colormixer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/colormixer.py
new file mode 100644
index 0000000000000000000000000000000000000000..f66012c81543170bcaa3a96f417f935c47aec514
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/colormixer.py
@@ -0,0 +1,57 @@
+"""turtledemo/colormixer.py"""
+from turtle import Screen, Turtle, mainloop
+
+class ColorTurtle(Turtle):
+
+    def __init__(self, x, y):
+        Turtle.__init__(self)
+        self.shape("turtle")
+        self.resizemode("user")
+        self.shapesize(3,3,5)
+        self.pensize(10)
+        self._color = [0,0,0]
+        self.x = x
+        self._color[x] = y
+        self.color(self._color)
+        self.speed(0)
+        self.left(90)
+        self.pu()
+        self.goto(x,0)
+        self.pd()
+        self.sety(1)
+        self.pu()
+        self.sety(y)
+        self.pencolor("gray25")
+        self.ondrag(self.shift)
+
+    def shift(self, x, y):
+        self.sety(max(0,min(y,1)))
+        self._color[self.x] = self.ycor()
+        self.fillcolor(self._color)
+        setbgcolor()
+
+def setbgcolor():
+    screen.bgcolor(red.ycor(), green.ycor(), blue.ycor())
+
+def main():
+    global screen, red, green, blue
+    screen = Screen()
+    screen.delay(0)
+    screen.setworldcoordinates(-1, -0.3, 3, 1.3)
+
+    red = ColorTurtle(0, .5)
+    green = ColorTurtle(1, .5)
+    blue = ColorTurtle(2, .5)
+    setbgcolor()
+
+    writer = Turtle()
+    writer.ht()
+    writer.pu()
+    writer.goto(1,1.15)
+    writer.write("DRAG!",align="center",font=("Arial",30,("bold","italic")))
+    return "EVENTLOOP"
+
+if __name__ == "__main__":
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/forest.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/forest.py
new file mode 100644
index 0000000000000000000000000000000000000000..e1fa85a577ffce28b5fc6f0aa29e50ca7ae65064
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/forest.py
@@ -0,0 +1,104 @@
+"""turtledemo/forest.py
+
+Displays a 'forest' of 3 breadth-first trees,
+similar to the one in tree.py.
+For further details, see tree.py.
+
+This example is a breadth-first rewrite of
+a Logo program by Erich Neuwirth.
+"""
+from turtle import Turtle, colormode, tracer, mainloop
+from random import randrange
+from time import perf_counter as clock
+
+def symRandom(n):
+    return randrange(-n,n+1)
+
+def randomize( branchlist, angledist, sizedist ):
+    return [ (angle+symRandom(angledist),
+              sizefactor*1.01**symRandom(sizedist))
+                     for angle, sizefactor in branchlist ]
+
+def randomfd( t, distance, parts, angledist ):
+    for i in range(parts):
+        t.left(symRandom(angledist))
+        t.forward( (1.0 * distance)/parts )
+
+def tree(tlist, size, level, widthfactor, branchlists, angledist=10, sizedist=5):
+    # benutzt Liste von turtles und Liste von Zweiglisten,
+    # fuer jede turtle eine!
+    if level > 0:
+        lst = []
+        brs = []
+        for t, branchlist in list(zip(tlist,branchlists)):
+            t.pensize( size * widthfactor )
+            t.pencolor( 255 - (180 - 11 * level + symRandom(15)),
+                        180 - 11 * level + symRandom(15),
+                        0 )
+            t.pendown()
+            randomfd(t, size, level, angledist )
+            yield 1
+            for angle, sizefactor in branchlist:
+                t.left(angle)
+                lst.append(t.clone())
+                brs.append(randomize(branchlist, angledist, sizedist))
+                t.right(angle)
+        for x in tree(lst, size*sizefactor, level-1, widthfactor, brs,
+                      angledist, sizedist):
+            yield None
+
+
+def start(t,x,y):
+    colormode(255)
+    t.reset()
+    t.speed(0)
+    t.hideturtle()
+    t.left(90)
+    t.penup()
+    t.setpos(x,y)
+    t.pendown()
+
+def doit1(level, pen):
+    pen.hideturtle()
+    start(pen, 20, -208)
+    t = tree( [pen], 80, level, 0.1, [[ (45,0.69), (0,0.65), (-45,0.71) ]] )
+    return t
+
+def doit2(level, pen):
+    pen.hideturtle()
+    start(pen, -135, -130)
+    t = tree( [pen], 120, level, 0.1, [[ (45,0.69), (-45,0.71) ]] )
+    return t
+
+def doit3(level, pen):
+    pen.hideturtle()
+    start(pen, 190, -90)
+    t = tree( [pen], 100, level, 0.1, [[ (45,0.7), (0,0.72), (-45,0.65) ]] )
+    return t
+
+# Hier 3 Baumgeneratoren:
+def main():
+    p = Turtle()
+    p.ht()
+    tracer(75,0)
+    u = doit1(6, Turtle(undobuffersize=1))
+    s = doit2(7, Turtle(undobuffersize=1))
+    t = doit3(5, Turtle(undobuffersize=1))
+    a = clock()
+    while True:
+        done = 0
+        for b in u,s,t:
+            try:
+                b.__next__()
+            except:
+                done += 1
+        if done == 3:
+            break
+
+    tracer(1,10)
+    b = clock()
+    return "runtime: %.2f sec." % (b-a)
+
+if __name__ == '__main__':
+    main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/fractalcurves.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/fractalcurves.py
new file mode 100644
index 0000000000000000000000000000000000000000..2d0a506a4f5b9f21cd60387e0b5e3155d0e626c6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/fractalcurves.py
@@ -0,0 +1,135 @@
+"""turtledemo/fractalcurves.py
+
+This program draws two fractal-curve-designs:
+(1) A hilbert curve (in a box)
+(2) A combination of Koch-curves.
+
+The CurvesTurtle class and the fractal-curve-
+methods are taken from the PythonCard example
+scripts for turtle-graphics.
+"""
+from turtle import *
+from time import sleep, perf_counter as clock
+
+class CurvesTurtle(Pen):
+    # example derived from
+    # Turtle Geometry: The Computer as a Medium for Exploring Mathematics
+    # by Harold Abelson and Andrea diSessa
+    # p. 96-98
+    def hilbert(self, size, level, parity):
+        if level == 0:
+            return
+        # rotate and draw first subcurve with opposite parity to big curve
+        self.left(parity * 90)
+        self.hilbert(size, level - 1, -parity)
+        # interface to and draw second subcurve with same parity as big curve
+        self.forward(size)
+        self.right(parity * 90)
+        self.hilbert(size, level - 1, parity)
+        # third subcurve
+        self.forward(size)
+        self.hilbert(size, level - 1, parity)
+        # fourth subcurve
+        self.right(parity * 90)
+        self.forward(size)
+        self.hilbert(size, level - 1, -parity)
+        # a final turn is needed to make the turtle
+        # end up facing outward from the large square
+        self.left(parity * 90)
+
+    # Visual Modeling with Logo: A Structural Approach to Seeing
+    # by James Clayson
+    # Koch curve, after Helge von Koch who introduced this geometric figure in 1904
+    # p. 146
+    def fractalgon(self, n, rad, lev, dir):
+        import math
+
+        # if dir = 1 turn outward
+        # if dir = -1 turn inward
+        edge = 2 * rad * math.sin(math.pi / n)
+        self.pu()
+        self.fd(rad)
+        self.pd()
+        self.rt(180 - (90 * (n - 2) / n))
+        for i in range(n):
+            self.fractal(edge, lev, dir)
+            self.rt(360 / n)
+        self.lt(180 - (90 * (n - 2) / n))
+        self.pu()
+        self.bk(rad)
+        self.pd()
+
+    # p. 146
+    def fractal(self, dist, depth, dir):
+        if depth < 1:
+            self.fd(dist)
+            return
+        self.fractal(dist / 3, depth - 1, dir)
+        self.lt(60 * dir)
+        self.fractal(dist / 3, depth - 1, dir)
+        self.rt(120 * dir)
+        self.fractal(dist / 3, depth - 1, dir)
+        self.lt(60 * dir)
+        self.fractal(dist / 3, depth - 1, dir)
+
+def main():
+    ft = CurvesTurtle()
+
+    ft.reset()
+    ft.speed(0)
+    ft.ht()
+    ft.getscreen().tracer(1,0)
+    ft.pu()
+
+    size = 6
+    ft.setpos(-33*size, -32*size)
+    ft.pd()
+
+    ta=clock()
+    ft.fillcolor("red")
+    ft.begin_fill()
+    ft.fd(size)
+
+    ft.hilbert(size, 6, 1)
+
+    # frame
+    ft.fd(size)
+    for i in range(3):
+        ft.lt(90)
+        ft.fd(size*(64+i%2))
+    ft.pu()
+    for i in range(2):
+        ft.fd(size)
+        ft.rt(90)
+    ft.pd()
+    for i in range(4):
+        ft.fd(size*(66+i%2))
+        ft.rt(90)
+    ft.end_fill()
+    tb=clock()
+    res =  "Hilbert: %.2fsec. " % (tb-ta)
+
+    sleep(3)
+
+    ft.reset()
+    ft.speed(0)
+    ft.ht()
+    ft.getscreen().tracer(1,0)
+
+    ta=clock()
+    ft.color("black", "blue")
+    ft.begin_fill()
+    ft.fractalgon(3, 250, 4, 1)
+    ft.end_fill()
+    ft.begin_fill()
+    ft.color("red")
+    ft.fractalgon(3, 200, 4, -1)
+    ft.end_fill()
+    tb=clock()
+    res +=  "Koch: %.2fsec." % (tb-ta)
+    return res
+
+if __name__  == '__main__':
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/lindenmayer.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/lindenmayer.py
new file mode 100644
index 0000000000000000000000000000000000000000..eb309afb9381b1ed861f307ced0c5d2d7266bb4e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/lindenmayer.py
@@ -0,0 +1,116 @@
+"""turtledemo/lindenmayer.py
+
+Each morning women in Tamil Nadu, in southern
+India, place designs, created by using rice
+flour and known as kolam on the thresholds of
+their homes.
+
+These can be described by Lindenmayer systems,
+which can easily be implemented with turtle
+graphics and Python.
+
+Two examples are shown here:
+(1) the snake kolam
+(2) anklets of Krishna
+
+Taken from Marcia Ascher: Mathematics
+Elsewhere, An Exploration of Ideas Across
+Cultures
+
+"""
+################################
+# Mini Lindenmayer tool
+###############################
+
+from turtle import *
+
+def replace( seq, replacementRules, n ):
+    for i in range(n):
+        newseq = ""
+        for element in seq:
+            newseq = newseq + replacementRules.get(element,element)
+        seq = newseq
+    return seq
+
+def draw( commands, rules ):
+    for b in commands:
+        try:
+            rules[b]()
+        except TypeError:
+            try:
+                draw(rules[b], rules)
+            except:
+                pass
+
+
+def main():
+    ################################
+    # Example 1: Snake kolam
+    ################################
+
+
+    def r():
+        right(45)
+
+    def l():
+        left(45)
+
+    def f():
+        forward(7.5)
+
+    snake_rules = {"-":r, "+":l, "f":f, "b":"f+f+f--f--f+f+f"}
+    snake_replacementRules = {"b": "b+f+b--f--b+f+b"}
+    snake_start = "b--f--b--f"
+
+    drawing = replace(snake_start, snake_replacementRules, 3)
+
+    reset()
+    speed(3)
+    tracer(1,0)
+    ht()
+    up()
+    backward(195)
+    down()
+    draw(drawing, snake_rules)
+
+    from time import sleep
+    sleep(3)
+
+    ################################
+    # Example 2: Anklets of Krishna
+    ################################
+
+    def A():
+        color("red")
+        circle(10,90)
+
+    def B():
+        from math import sqrt
+        color("black")
+        l = 5/sqrt(2)
+        forward(l)
+        circle(l, 270)
+        forward(l)
+
+    def F():
+        color("green")
+        forward(10)
+
+    krishna_rules = {"a":A, "b":B, "f":F}
+    krishna_replacementRules = {"a" : "afbfa", "b" : "afbfbfbfa" }
+    krishna_start = "fbfbfbfb"
+
+    reset()
+    speed(0)
+    tracer(3,0)
+    ht()
+    left(45)
+    drawing = replace(krishna_start, krishna_replacementRules, 3)
+    draw(drawing, krishna_rules)
+    tracer(1)
+    return "Done!"
+
+if __name__=='__main__':
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/minimal_hanoi.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/minimal_hanoi.py
new file mode 100644
index 0000000000000000000000000000000000000000..e44330eaaf7f187adc32ea91f3bd9475b9febdeb
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/minimal_hanoi.py
@@ -0,0 +1,73 @@
+"""turtledemo/minimal_hanoi.py
+
+A minimal 'Towers of Hanoi' animation:
+A tower of 6 discs is transferred from the
+left to the right peg.
+
+An imho quite elegant and concise
+implementation using a tower class, which
+is derived from the built-in type list.
+
+Discs are turtles with shape "square", but
+stretched to rectangles by shapesize()
+"""
+from turtle import *
+
+class Disc(Turtle):
+    def __init__(self, n):
+        Turtle.__init__(self, shape="square", visible=False)
+        self.pu()
+        self.shapesize(1.5, n*1.5, 2) # square-->rectangle
+        self.fillcolor(n/6., 0, 1-n/6.)
+        self.st()
+
+class Tower(list):
+    "Hanoi tower, a subclass of built-in type list"
+    def __init__(self, x):
+        "create an empty tower. x is x-position of peg"
+        self.x = x
+    def push(self, d):
+        d.setx(self.x)
+        d.sety(-150+34*len(self))
+        self.append(d)
+    def pop(self):
+        d = list.pop(self)
+        d.sety(150)
+        return d
+
+def hanoi(n, from_, with_, to_):
+    if n > 0:
+        hanoi(n-1, from_, to_, with_)
+        to_.push(from_.pop())
+        hanoi(n-1, with_, from_, to_)
+
+def play():
+    onkey(None,"space")
+    clear()
+    try:
+        hanoi(6, t1, t2, t3)
+        write("press STOP button to exit",
+              align="center", font=("Courier", 16, "bold"))
+    except Terminator:
+        pass  # turtledemo user pressed STOP
+
+def main():
+    global t1, t2, t3
+    ht(); penup(); goto(0, -225)   # writer turtle
+    t1 = Tower(-250)
+    t2 = Tower(0)
+    t3 = Tower(250)
+    # make tower of 6 discs
+    for i in range(6,0,-1):
+        t1.push(Disc(i))
+    # prepare spartanic user interface ;-)
+    write("press spacebar to start game",
+          align="center", font=("Courier", 16, "bold"))
+    onkey(play, "space")
+    listen()
+    return "EVENTLOOP"
+
+if __name__=="__main__":
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/nim.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/nim.py
new file mode 100644
index 0000000000000000000000000000000000000000..f87c479714d66203d4ab3daaa922548d53a0c1ef
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/nim.py
@@ -0,0 +1,224 @@
+"""turtledemo/nim.py
+
+Play nim against the computer. The player
+who takes the last stick is the winner.
+
+Implements the model-view-controller
+design pattern.
+"""
+
+
+import turtle
+import random
+import time
+
+SCREENWIDTH = 640
+SCREENHEIGHT = 480
+
+MINSTICKS = 7
+MAXSTICKS = 31
+
+HUNIT = SCREENHEIGHT // 12
+WUNIT = SCREENWIDTH // ((MAXSTICKS // 5) * 11 + (MAXSTICKS % 5) * 2)
+
+SCOLOR = (63, 63, 31)
+HCOLOR = (255, 204, 204)
+COLOR = (204, 204, 255)
+
+def randomrow():
+    return random.randint(MINSTICKS, MAXSTICKS)
+
+def computerzug(state):
+    xored = state[0] ^ state[1] ^ state[2]
+    if xored == 0:
+        return randommove(state)
+    for z in range(3):
+        s = state[z] ^ xored
+        if s <= state[z]:
+            move = (z, s)
+            return move
+
+def randommove(state):
+    m = max(state)
+    while True:
+        z = random.randint(0,2)
+        if state[z] > (m > 1):
+            break
+    rand = random.randint(m > 1, state[z]-1)
+    return z, rand
+
+
+class NimModel(object):
+    def __init__(self, game):
+        self.game = game
+
+    def setup(self):
+        if self.game.state not in [Nim.CREATED, Nim.OVER]:
+            return
+        self.sticks = [randomrow(), randomrow(), randomrow()]
+        self.player = 0
+        self.winner = None
+        self.game.view.setup()
+        self.game.state = Nim.RUNNING
+
+    def move(self, row, col):
+        maxspalte = self.sticks[row]
+        self.sticks[row] = col
+        self.game.view.notify_move(row, col, maxspalte, self.player)
+        if self.game_over():
+            self.game.state = Nim.OVER
+            self.winner = self.player
+            self.game.view.notify_over()
+        elif self.player == 0:
+            self.player = 1
+            row, col = computerzug(self.sticks)
+            self.move(row, col)
+            self.player = 0
+
+    def game_over(self):
+        return self.sticks == [0, 0, 0]
+
+    def notify_move(self, row, col):
+        if self.sticks[row] <= col:
+            return
+        self.move(row, col)
+
+
+class Stick(turtle.Turtle):
+    def __init__(self, row, col, game):
+        turtle.Turtle.__init__(self, visible=False)
+        self.row = row
+        self.col = col
+        self.game = game
+        x, y = self.coords(row, col)
+        self.shape("square")
+        self.shapesize(HUNIT/10.0, WUNIT/20.0)
+        self.speed(0)
+        self.pu()
+        self.goto(x,y)
+        self.color("white")
+        self.showturtle()
+
+    def coords(self, row, col):
+        packet, remainder = divmod(col, 5)
+        x = (3 + 11 * packet + 2 * remainder) * WUNIT
+        y = (2 + 3 * row) * HUNIT
+        return x - SCREENWIDTH // 2 + WUNIT // 2, SCREENHEIGHT // 2 - y - HUNIT // 2
+
+    def makemove(self, x, y):
+        if self.game.state != Nim.RUNNING:
+            return
+        self.game.controller.notify_move(self.row, self.col)
+
+
+class NimView(object):
+    def __init__(self, game):
+        self.game = game
+        self.screen = game.screen
+        self.model = game.model
+        self.screen.colormode(255)
+        self.screen.tracer(False)
+        self.screen.bgcolor((240, 240, 255))
+        self.writer = turtle.Turtle(visible=False)
+        self.writer.pu()
+        self.writer.speed(0)
+        self.sticks = {}
+        for row in range(3):
+            for col in range(MAXSTICKS):
+                self.sticks[(row, col)] = Stick(row, col, game)
+        self.display("... a moment please ...")
+        self.screen.tracer(True)
+
+    def display(self, msg1, msg2=None):
+        self.screen.tracer(False)
+        self.writer.clear()
+        if msg2 is not None:
+            self.writer.goto(0, - SCREENHEIGHT // 2 + 48)
+            self.writer.pencolor("red")
+            self.writer.write(msg2, align="center", font=("Courier",18,"bold"))
+        self.writer.goto(0, - SCREENHEIGHT // 2 + 20)
+        self.writer.pencolor("black")
+        self.writer.write(msg1, align="center", font=("Courier",14,"bold"))
+        self.screen.tracer(True)
+
+    def setup(self):
+        self.screen.tracer(False)
+        for row in range(3):
+            for col in range(self.model.sticks[row]):
+                self.sticks[(row, col)].color(SCOLOR)
+        for row in range(3):
+            for col in range(self.model.sticks[row], MAXSTICKS):
+                self.sticks[(row, col)].color("white")
+        self.display("Your turn! Click leftmost stick to remove.")
+        self.screen.tracer(True)
+
+    def notify_move(self, row, col, maxspalte, player):
+        if player == 0:
+            farbe = HCOLOR
+            for s in range(col, maxspalte):
+                self.sticks[(row, s)].color(farbe)
+        else:
+            self.display(" ... thinking ...         ")
+            time.sleep(0.5)
+            self.display(" ... thinking ... aaah ...")
+            farbe = COLOR
+            for s in range(maxspalte-1, col-1, -1):
+                time.sleep(0.2)
+                self.sticks[(row, s)].color(farbe)
+            self.display("Your turn! Click leftmost stick to remove.")
+
+    def notify_over(self):
+        if self.game.model.winner == 0:
+            msg2 = "Congrats. You're the winner!!!"
+        else:
+            msg2 = "Sorry, the computer is the winner."
+        self.display("To play again press space bar. To leave press ESC.", msg2)
+
+    def clear(self):
+        if self.game.state == Nim.OVER:
+            self.screen.clear()
+
+
+class NimController(object):
+
+    def __init__(self, game):
+        self.game = game
+        self.sticks = game.view.sticks
+        self.BUSY = False
+        for stick in self.sticks.values():
+            stick.onclick(stick.makemove)
+        self.game.screen.onkey(self.game.model.setup, "space")
+        self.game.screen.onkey(self.game.view.clear, "Escape")
+        self.game.view.display("Press space bar to start game")
+        self.game.screen.listen()
+
+    def notify_move(self, row, col):
+        if self.BUSY:
+            return
+        self.BUSY = True
+        self.game.model.notify_move(row, col)
+        self.BUSY = False
+
+
+class Nim(object):
+    CREATED = 0
+    RUNNING = 1
+    OVER = 2
+    def __init__(self, screen):
+        self.state = Nim.CREATED
+        self.screen = screen
+        self.model = NimModel(self)
+        self.view = NimView(self)
+        self.controller = NimController(self)
+
+
+def main():
+    mainscreen = turtle.Screen()
+    mainscreen.mode("standard")
+    mainscreen.setup(SCREENWIDTH, SCREENHEIGHT)
+    nim = Nim(mainscreen)
+    return "EVENTLOOP"
+
+if __name__ == "__main__":
+    main()
+    turtle.mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/paint.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/paint.py
new file mode 100644
index 0000000000000000000000000000000000000000..780300fb2da9d1850bde32615e5bd39c38068388
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/paint.py
@@ -0,0 +1,48 @@
+"""turtledemo/paint.py
+
+A simple  event-driven paint program.
+- Left mouse button moves turtle.
+- Middle mouse button changes color.
+- Right mouse button toggles between pen up
+(no line drawn when the turtle moves) and
+pen down (line is drawn). If pen up follows
+at least two pen-down moves, the polygon that
+includes the starting point is filled.
+ -------------------------------------------
+ Play around by clicking into the canvas
+ using all three mouse buttons.
+ -------------------------------------------
+"""
+from turtle import *
+
+def switchupdown(x=0, y=0):
+    if pen()["pendown"]:
+        end_fill()
+        up()
+    else:
+        down()
+        begin_fill()
+
+def changecolor(x=0, y=0):
+    global colors
+    colors = colors[1:]+colors[:1]
+    color(colors[0])
+
+def main():
+    global colors
+    shape("circle")
+    resizemode("user")
+    shapesize(.5)
+    width(3)
+    colors=["red", "green", "blue", "yellow"]
+    color(colors[0])
+    switchupdown()
+    onscreenclick(goto,1)
+    onscreenclick(changecolor,2)
+    onscreenclick(switchupdown,3)
+    return "EVENTLOOP"
+
+if __name__ == "__main__":
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/peace.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/peace.py
new file mode 100644
index 0000000000000000000000000000000000000000..d86c94a48a24723e98be0a393ca05d39bbcc81f6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/peace.py
@@ -0,0 +1,58 @@
+"""turtledemo/peace.py
+
+A simple drawing suitable as a beginner's
+programming example. Aside from the
+peacecolors assignment and the for loop,
+it only uses turtle commands.
+"""
+
+from turtle import *
+
+def main():
+    peacecolors = ("red3",  "orange", "yellow",
+                   "seagreen4", "orchid4",
+                   "royalblue1", "dodgerblue4")
+
+    reset()
+    Screen()
+    up()
+    goto(-320,-195)
+    width(70)
+
+    for pcolor in peacecolors:
+        color(pcolor)
+        down()
+        forward(640)
+        up()
+        backward(640)
+        left(90)
+        forward(66)
+        right(90)
+
+    width(25)
+    color("white")
+    goto(0,-170)
+    down()
+
+    circle(170)
+    left(90)
+    forward(340)
+    up()
+    left(180)
+    forward(170)
+    right(45)
+    down()
+    forward(170)
+    up()
+    backward(170)
+    left(90)
+    down()
+    forward(170)
+    up()
+
+    goto(0,300) # vanish if hideturtle() is not available ;-)
+    return "Done!"
+
+if __name__ == "__main__":
+    main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/penrose.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/penrose.py
new file mode 100644
index 0000000000000000000000000000000000000000..ceaefedac24a67602868615b1c6710f6c81794f3
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/penrose.py
@@ -0,0 +1,172 @@
+"""turtledemo/penrose.py
+
+Constructs two aperiodic penrose-tilings,
+consisting of kites and darts, by the method
+of inflation in six steps.
+
+Starting points are the patterns "sun"
+consisting of five kites and "star"
+consisting of five darts.
+
+For more information see:
+ https://en.wikipedia.org/wiki/Penrose_tiling
+ -------------------------------------------
+"""
+from turtle import *
+from math import cos, pi
+from time import perf_counter as clock, sleep
+
+f = (5**0.5-1)/2.0   # (sqrt(5)-1)/2 -- golden ratio
+d = 2 * cos(3*pi/10)
+
+def kite(l):
+    fl = f * l
+    lt(36)
+    fd(l)
+    rt(108)
+    fd(fl)
+    rt(36)
+    fd(fl)
+    rt(108)
+    fd(l)
+    rt(144)
+
+def dart(l):
+    fl = f * l
+    lt(36)
+    fd(l)
+    rt(144)
+    fd(fl)
+    lt(36)
+    fd(fl)
+    rt(144)
+    fd(l)
+    rt(144)
+
+def inflatekite(l, n):
+    if n == 0:
+        px, py = pos()
+        h, x, y = int(heading()), round(px,3), round(py,3)
+        tiledict[(h,x,y)] = True
+        return
+    fl = f * l
+    lt(36)
+    inflatedart(fl, n-1)
+    fd(l)
+    rt(144)
+    inflatekite(fl, n-1)
+    lt(18)
+    fd(l*d)
+    rt(162)
+    inflatekite(fl, n-1)
+    lt(36)
+    fd(l)
+    rt(180)
+    inflatedart(fl, n-1)
+    lt(36)
+
+def inflatedart(l, n):
+    if n == 0:
+        px, py = pos()
+        h, x, y = int(heading()), round(px,3), round(py,3)
+        tiledict[(h,x,y)] = False
+        return
+    fl = f * l
+    inflatekite(fl, n-1)
+    lt(36)
+    fd(l)
+    rt(180)
+    inflatedart(fl, n-1)
+    lt(54)
+    fd(l*d)
+    rt(126)
+    inflatedart(fl, n-1)
+    fd(l)
+    rt(144)
+
+def draw(l, n, th=2):
+    clear()
+    l = l * f**n
+    shapesize(l/100.0, l/100.0, th)
+    for k in tiledict:
+        h, x, y = k
+        setpos(x, y)
+        setheading(h)
+        if tiledict[k]:
+            shape("kite")
+            color("black", (0, 0.75, 0))
+        else:
+            shape("dart")
+            color("black", (0.75, 0, 0))
+        stamp()
+
+def sun(l, n):
+    for i in range(5):
+        inflatekite(l, n)
+        lt(72)
+
+def star(l,n):
+    for i in range(5):
+        inflatedart(l, n)
+        lt(72)
+
+def makeshapes():
+    tracer(0)
+    begin_poly()
+    kite(100)
+    end_poly()
+    register_shape("kite", get_poly())
+    begin_poly()
+    dart(100)
+    end_poly()
+    register_shape("dart", get_poly())
+    tracer(1)
+
+def start():
+    reset()
+    ht()
+    pu()
+    makeshapes()
+    resizemode("user")
+
+def test(l=200, n=4, fun=sun, startpos=(0,0), th=2):
+    global tiledict
+    goto(startpos)
+    setheading(0)
+    tiledict = {}
+    tracer(0)
+    fun(l, n)
+    draw(l, n, th)
+    tracer(1)
+    nk = len([x for x in tiledict if tiledict[x]])
+    nd = len([x for x in tiledict if not tiledict[x]])
+    print("%d kites and %d darts = %d pieces." % (nk, nd, nk+nd))
+
+def demo(fun=sun):
+    start()
+    for i in range(8):
+        a = clock()
+        test(300, i, fun)
+        b = clock()
+        t = b - a
+        if t < 2:
+            sleep(2 - t)
+
+def main():
+    #title("Penrose-tiling with kites and darts.")
+    mode("logo")
+    bgcolor(0.3, 0.3, 0)
+    demo(sun)
+    sleep(2)
+    demo(star)
+    pencolor("black")
+    goto(0,-200)
+    pencolor(0.7,0.7,1)
+    write("Please wait...",
+          align="center", font=('Arial Black', 36, 'bold'))
+    test(600, 8, startpos=(70, 117))
+    return "Done"
+
+if __name__ == "__main__":
+    msg = main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/planet_and_moon.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/planet_and_moon.py
new file mode 100644
index 0000000000000000000000000000000000000000..571afcf922103f7359feece7ffffa56a4cc32631
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/planet_and_moon.py
@@ -0,0 +1,108 @@
+"""turtledemo/planets_and_moon.py
+
+Gravitational system simulation using the
+approximation method from Feynman-lectures,
+p.9-8, using turtlegraphics.
+
+Example: heavy central body, light planet,
+very light moon!
+Planet has a circular orbit, moon a stable
+orbit around the planet.
+
+You can hold the movement temporarily by
+pressing the left mouse button with the
+mouse over the scrollbar of the canvas.
+
+"""
+from turtle import Shape, Turtle, mainloop, Vec2D as Vec
+
+G = 8
+
+class GravSys(object):
+    def __init__(self):
+        self.planets = []
+        self.t = 0
+        self.dt = 0.01
+    def init(self):
+        for p in self.planets:
+            p.init()
+    def start(self):
+        for i in range(10000):
+            self.t += self.dt
+            for p in self.planets:
+                p.step()
+
+class Star(Turtle):
+    def __init__(self, m, x, v, gravSys, shape):
+        Turtle.__init__(self, shape=shape)
+        self.penup()
+        self.m = m
+        self.setpos(x)
+        self.v = v
+        gravSys.planets.append(self)
+        self.gravSys = gravSys
+        self.resizemode("user")
+        self.pendown()
+    def init(self):
+        dt = self.gravSys.dt
+        self.a = self.acc()
+        self.v = self.v + 0.5*dt*self.a
+    def acc(self):
+        a = Vec(0,0)
+        for planet in self.gravSys.planets:
+            if planet != self:
+                v = planet.pos()-self.pos()
+                a += (G*planet.m/abs(v)**3)*v
+        return a
+    def step(self):
+        dt = self.gravSys.dt
+        self.setpos(self.pos() + dt*self.v)
+        if self.gravSys.planets.index(self) != 0:
+            self.setheading(self.towards(self.gravSys.planets[0]))
+        self.a = self.acc()
+        self.v = self.v + dt*self.a
+
+## create compound yellow/blue turtleshape for planets
+
+def main():
+    s = Turtle()
+    s.reset()
+    s.getscreen().tracer(0,0)
+    s.ht()
+    s.pu()
+    s.fd(6)
+    s.lt(90)
+    s.begin_poly()
+    s.circle(6, 180)
+    s.end_poly()
+    m1 = s.get_poly()
+    s.begin_poly()
+    s.circle(6,180)
+    s.end_poly()
+    m2 = s.get_poly()
+
+    planetshape = Shape("compound")
+    planetshape.addcomponent(m1,"orange")
+    planetshape.addcomponent(m2,"blue")
+    s.getscreen().register_shape("planet", planetshape)
+    s.getscreen().tracer(1,0)
+
+    ## setup gravitational system
+    gs = GravSys()
+    sun = Star(1000000, Vec(0,0), Vec(0,-2.5), gs, "circle")
+    sun.color("yellow")
+    sun.shapesize(1.8)
+    sun.pu()
+    earth = Star(12500, Vec(210,0), Vec(0,195), gs, "planet")
+    earth.pencolor("green")
+    earth.shapesize(0.8)
+    moon = Star(1, Vec(220,0), Vec(0,295), gs, "planet")
+    moon.pencolor("blue")
+    moon.shapesize(0.5)
+    gs.init()
+    gs.start()
+    return "Done!"
+
+if __name__ == '__main__':
+    main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/rosette.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/rosette.py
new file mode 100644
index 0000000000000000000000000000000000000000..48897a620f9d8ba2131822cc434e4a5f8dc0f93b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/rosette.py
@@ -0,0 +1,63 @@
+"""turtledemo/rosette.py
+
+This example is
+inspired by the Wikipedia article on turtle
+graphics. (See example wikipedia1 for URLs)
+
+First we create (ne-1) (i.e. 35 in this
+example) copies of our first turtle p.
+Then we let them perform their steps in
+parallel.
+
+Followed by a complete undo().
+"""
+from turtle import Screen, Turtle, mainloop
+from time import perf_counter as clock, sleep
+
+def mn_eck(p, ne,sz):
+    turtlelist = [p]
+    #create ne-1 additional turtles
+    for i in range(1,ne):
+        q = p.clone()
+        q.rt(360.0/ne)
+        turtlelist.append(q)
+        p = q
+    for i in range(ne):
+        c = abs(ne/2.0-i)/(ne*.7)
+        # let those ne turtles make a step
+        # in parallel:
+        for t in turtlelist:
+            t.rt(360./ne)
+            t.pencolor(1-c,0,c)
+            t.fd(sz)
+
+def main():
+    s = Screen()
+    s.bgcolor("black")
+    p=Turtle()
+    p.speed(0)
+    p.hideturtle()
+    p.pencolor("red")
+    p.pensize(3)
+
+    s.tracer(36,0)
+
+    at = clock()
+    mn_eck(p, 36, 19)
+    et = clock()
+    z1 = et-at
+
+    sleep(1)
+
+    at = clock()
+    while any(t.undobufferentries() for t in s.turtles()):
+        for t in s.turtles():
+            t.undo()
+    et = clock()
+    return "runtime: %.3f sec" % (z1+et-at)
+
+
+if __name__ == '__main__':
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/round_dance.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/round_dance.py
new file mode 100644
index 0000000000000000000000000000000000000000..9da6389b213207dfe2d3b38401e3eb23cc423cff
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/round_dance.py
@@ -0,0 +1,81 @@
+"""turtledemo/round_dance.py
+
+Dancing turtles have a compound shape
+consisting of a series of triangles of
+decreasing size.
+
+Turtles march along a circle while rotating
+pairwise in opposite direction, with one
+exception. Does that breaking of symmetry
+enhance the attractiveness of the example?
+
+Press any key to stop the animation.
+
+Technically: demonstrates use of compound
+shapes, transformation of shapes as well as
+cloning turtles. The animation is
+controlled through update().
+"""
+
+from turtle import *
+
+def stop():
+    global running
+    running = False
+
+def main():
+    global running
+    clearscreen()
+    bgcolor("gray10")
+    tracer(False)
+    shape("triangle")
+    f =   0.793402
+    phi = 9.064678
+    s = 5
+    c = 1
+    # create compound shape
+    sh = Shape("compound")
+    for i in range(10):
+        shapesize(s)
+        p =get_shapepoly()
+        s *= f
+        c *= f
+        tilt(-phi)
+        sh.addcomponent(p, (c, 0.25, 1-c), "black")
+    register_shape("multitri", sh)
+    # create dancers
+    shapesize(1)
+    shape("multitri")
+    pu()
+    setpos(0, -200)
+    dancers = []
+    for i in range(180):
+        fd(7)
+        tilt(-4)
+        lt(2)
+        update()
+        if i % 12 == 0:
+            dancers.append(clone())
+    home()
+    # dance
+    running = True
+    onkeypress(stop)
+    listen()
+    cs = 1
+    while running:
+        ta = -4
+        for dancer in dancers:
+            dancer.fd(7)
+            dancer.lt(2)
+            dancer.tilt(ta)
+            ta = -4 if ta > 0 else 2
+        if cs < 180:
+            right(4)
+            shapesize(cs)
+            cs *= 1.005
+        update()
+    return "DONE!"
+
+if __name__=='__main__':
+    print(main())
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/sorting_animate.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/sorting_animate.py
new file mode 100644
index 0000000000000000000000000000000000000000..e0a2877cd5d621a54971c61149df1b7d36659b77
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/sorting_animate.py
@@ -0,0 +1,198 @@
+"""turtledemo/sorting_animation.py
+
+A minimal sorting algorithm animation:
+Sorts a shelf of 10 blocks using insertion
+sort, selection sort and quicksort.
+
+Shelves are implemented using builtin lists.
+
+Blocks are turtles with shape "square", but
+stretched to rectangles by shapesize()
+"""
+from turtle import *
+import random
+
+
+class Block(Turtle):
+
+    def __init__(self, size):
+        self.size = size
+        Turtle.__init__(self, shape="square", visible=False)
+        self.pu()
+        self.shapesize(size * 1.5, 1.5, 2) # square-->rectangle
+        self.fillcolor("black")
+        self.st()
+
+    def glow(self):
+        self.fillcolor("red")
+
+    def unglow(self):
+        self.fillcolor("black")
+
+    def __repr__(self):
+        return "Block size: {0}".format(self.size)
+
+
+class Shelf(list):
+
+    def __init__(self, y):
+        "create a shelf. y is y-position of first block"
+        self.y = y
+        self.x = -150
+
+    def push(self, d):
+        width, _, _ = d.shapesize()
+        # align blocks by the bottom edge
+        y_offset = width / 2 * 20
+        d.sety(self.y + y_offset)
+        d.setx(self.x + 34 * len(self))
+        self.append(d)
+
+    def _close_gap_from_i(self, i):
+        for b in self[i:]:
+            xpos, _ = b.pos()
+            b.setx(xpos - 34)
+
+    def _open_gap_from_i(self, i):
+        for b in self[i:]:
+            xpos, _ = b.pos()
+            b.setx(xpos + 34)
+
+    def pop(self, key):
+        b = list.pop(self, key)
+        b.glow()
+        b.sety(200)
+        self._close_gap_from_i(key)
+        return b
+
+    def insert(self, key, b):
+        self._open_gap_from_i(key)
+        list.insert(self, key, b)
+        b.setx(self.x + 34 * key)
+        width, _, _ = b.shapesize()
+        # align blocks by the bottom edge
+        y_offset = width / 2 * 20
+        b.sety(self.y + y_offset)
+        b.unglow()
+
+def isort(shelf):
+    length = len(shelf)
+    for i in range(1, length):
+        hole = i
+        while hole > 0 and shelf[i].size < shelf[hole - 1].size:
+            hole = hole - 1
+        shelf.insert(hole, shelf.pop(i))
+    return
+
+def ssort(shelf):
+    length = len(shelf)
+    for j in range(0, length - 1):
+        imin = j
+        for i in range(j + 1, length):
+            if shelf[i].size < shelf[imin].size:
+                imin = i
+        if imin != j:
+            shelf.insert(j, shelf.pop(imin))
+
+def partition(shelf, left, right, pivot_index):
+    pivot = shelf[pivot_index]
+    shelf.insert(right, shelf.pop(pivot_index))
+    store_index = left
+    for i in range(left, right): # range is non-inclusive of ending value
+        if shelf[i].size < pivot.size:
+            shelf.insert(store_index, shelf.pop(i))
+            store_index = store_index + 1
+    shelf.insert(store_index, shelf.pop(right)) # move pivot to correct position
+    return store_index
+
+def qsort(shelf, left, right):
+    if left < right:
+        pivot_index = left
+        pivot_new_index = partition(shelf, left, right, pivot_index)
+        qsort(shelf, left, pivot_new_index - 1)
+        qsort(shelf, pivot_new_index + 1, right)
+
+def randomize():
+    disable_keys()
+    clear()
+    target = list(range(10))
+    random.shuffle(target)
+    for i, t in enumerate(target):
+        for j in range(i, len(s)):
+            if s[j].size == t + 1:
+                s.insert(i, s.pop(j))
+    show_text(instructions1)
+    show_text(instructions2, line=1)
+    enable_keys()
+
+def show_text(text, line=0):
+    line = 20 * line
+    goto(0,-250 - line)
+    write(text, align="center", font=("Courier", 16, "bold"))
+
+def start_ssort():
+    disable_keys()
+    clear()
+    show_text("Selection Sort")
+    ssort(s)
+    clear()
+    show_text(instructions1)
+    show_text(instructions2, line=1)
+    enable_keys()
+
+def start_isort():
+    disable_keys()
+    clear()
+    show_text("Insertion Sort")
+    isort(s)
+    clear()
+    show_text(instructions1)
+    show_text(instructions2, line=1)
+    enable_keys()
+
+def start_qsort():
+    disable_keys()
+    clear()
+    show_text("Quicksort")
+    qsort(s, 0, len(s) - 1)
+    clear()
+    show_text(instructions1)
+    show_text(instructions2, line=1)
+    enable_keys()
+
+def init_shelf():
+    global s
+    s = Shelf(-200)
+    vals = (4, 2, 8, 9, 1, 5, 10, 3, 7, 6)
+    for i in vals:
+        s.push(Block(i))
+
+def disable_keys():
+    onkey(None, "s")
+    onkey(None, "i")
+    onkey(None, "q")
+    onkey(None, "r")
+
+def enable_keys():
+    onkey(start_isort, "i")
+    onkey(start_ssort, "s")
+    onkey(start_qsort, "q")
+    onkey(randomize, "r")
+    onkey(bye, "space")
+
+def main():
+    getscreen().clearscreen()
+    ht(); penup()
+    init_shelf()
+    show_text(instructions1)
+    show_text(instructions2, line=1)
+    enable_keys()
+    listen()
+    return "EVENTLOOP"
+
+instructions1 = "press i for insertion sort, s for selection sort, q for quicksort"
+instructions2 = "spacebar to quit, r to randomize"
+
+if __name__=="__main__":
+    msg = main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/tree.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/tree.py
new file mode 100644
index 0000000000000000000000000000000000000000..6ad8fcc854a155c1b57c9bb1a65153a045c70901
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/tree.py
@@ -0,0 +1,59 @@
+"""turtledemo/tree.py
+
+Displays a 'breadth-first-tree' - in contrast
+to the classical Logo tree drawing programs,
+which use a depth-first-algorithm.
+
+Uses:
+(1) a tree-generator, where the drawing is
+quasi the side-effect, whereas the generator
+always yields None.
+(2) Turtle-cloning: At each branching point
+the current pen is cloned. So in the end
+there are 1024 turtles.
+"""
+from turtle import Turtle, mainloop
+from time import perf_counter as clock
+
+def tree(plist, l, a, f):
+    """ plist is list of pens
+    l is length of branch
+    a is half of the angle between 2 branches
+    f is factor by which branch is shortened
+    from level to level."""
+    if l > 3:
+        lst = []
+        for p in plist:
+            p.forward(l)
+            q = p.clone()
+            p.left(a)
+            q.right(a)
+            lst.append(p)
+            lst.append(q)
+        for x in tree(lst, l*f, a, f):
+            yield None
+
+def maketree():
+    p = Turtle()
+    p.setundobuffer(None)
+    p.hideturtle()
+    p.speed(0)
+    p.getscreen().tracer(30,0)
+    p.left(90)
+    p.penup()
+    p.forward(-210)
+    p.pendown()
+    t = tree([p], 200, 65, 0.6375)
+    for x in t:
+        pass
+
+def main():
+    a=clock()
+    maketree()
+    b=clock()
+    return "done: %.2f sec." % (b-a)
+
+if __name__ == "__main__":
+    msg = main()
+    print(msg)
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/turtle.cfg b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/turtle.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..bd89a741f926912a6a9288a688d1f31d133afac9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/turtle.cfg
@@ -0,0 +1,10 @@
+width = 800
+height = 600
+canvwidth = 1200
+canvheight = 900
+shape = arrow
+mode = standard
+resizemode = auto
+fillcolor = ""
+title = Python turtle graphics demo.
+
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/two_canvases.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/two_canvases.py
new file mode 100644
index 0000000000000000000000000000000000000000..2c8020378edf1ba2b8428b824acf8048ce7895b7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/two_canvases.py
@@ -0,0 +1,54 @@
+"""turtledemo/two_canvases.py
+
+Use TurtleScreen and RawTurtle to draw on two
+distinct canvases in a separate window. The
+new window must be separately closed in
+addition to pressing the STOP button.
+"""
+
+from turtle import TurtleScreen, RawTurtle, TK
+
+def main():
+    root = TK.Tk()
+    cv1 = TK.Canvas(root, width=300, height=200, bg="#ddffff")
+    cv2 = TK.Canvas(root, width=300, height=200, bg="#ffeeee")
+    cv1.pack()
+    cv2.pack()
+
+    s1 = TurtleScreen(cv1)
+    s1.bgcolor(0.85, 0.85, 1)
+    s2 = TurtleScreen(cv2)
+    s2.bgcolor(1, 0.85, 0.85)
+
+    p = RawTurtle(s1)
+    q = RawTurtle(s2)
+
+    p.color("red", (1, 0.85, 0.85))
+    p.width(3)
+    q.color("blue", (0.85, 0.85, 1))
+    q.width(3)
+
+    for t in p,q:
+        t.shape("turtle")
+        t.lt(36)
+
+    q.lt(180)
+
+    for t in p, q:
+        t.begin_fill()
+    for i in range(5):
+        for t in p, q:
+            t.fd(50)
+            t.lt(72)
+    for t in p,q:
+        t.end_fill()
+        t.lt(54)
+        t.pu()
+        t.bk(50)
+
+    return "EVENTLOOP"
+
+
+if __name__ == '__main__':
+    main()
+    TK.mainloop()  # keep window open until user closes it
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/yinyang.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/yinyang.py
new file mode 100644
index 0000000000000000000000000000000000000000..6e92d4bf73919460ab6b3eb5e7419a004ea2006c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/turtledemo/yinyang.py
@@ -0,0 +1,46 @@
+"""turtledemo/yinyang.py
+
+Another drawing suitable as a beginner's
+programming example.
+
+The small circles are drawn by the circle
+command.
+
+"""
+
+from turtle import *
+
+def yin(radius, color1, color2):
+    width(3)
+    color("black", color1)
+    begin_fill()
+    circle(radius/2., 180)
+    circle(radius, 180)
+    left(180)
+    circle(-radius/2., 180)
+    end_fill()
+    left(90)
+    up()
+    forward(radius*0.35)
+    right(90)
+    down()
+    color(color1, color2)
+    begin_fill()
+    circle(radius*0.15)
+    end_fill()
+    left(90)
+    up()
+    backward(radius*0.35)
+    down()
+    left(90)
+
+def main():
+    reset()
+    yin(200, "black", "white")
+    yin(200, "white", "black")
+    ht()
+    return "Done!"
+
+if __name__ == '__main__':
+    main()
+    mainloop()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..78ff6bb4fdcce5db138212392ad87515d7dee576
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__init__.py
@@ -0,0 +1,80 @@
+"""
+Python unit testing framework, based on Erich Gamma's JUnit and Kent Beck's
+Smalltalk testing framework (used with permission).
+
+This module contains the core framework classes that form the basis of
+specific test cases and suites (TestCase, TestSuite etc.), and also a
+text-based utility class for running the tests and reporting the results
+ (TextTestRunner).
+
+Simple usage:
+
+    import unittest
+
+    class IntegerArithmeticTestCase(unittest.TestCase):
+        def testAdd(self):  # test method names begin with 'test'
+            self.assertEqual((1 + 2), 3)
+            self.assertEqual(0 + 1, 1)
+        def testMultiply(self):
+            self.assertEqual((0 * 10), 0)
+            self.assertEqual((5 * 8), 40)
+
+    if __name__ == '__main__':
+        unittest.main()
+
+Further information is available in the bundled documentation, and from
+
+  http://docs.python.org/library/unittest.html
+
+Copyright (c) 1999-2003 Steve Purcell
+Copyright (c) 2003 Python Software Foundation
+This module is free software, and you may redistribute it and/or modify
+it under the same terms as Python itself, so long as this copyright message
+and disclaimer are retained in their original form.
+
+IN NO EVENT SHALL THE AUTHOR BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
+THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGE.
+
+THE AUTHOR SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE.  THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS,
+AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
+SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+"""
+
+__all__ = ['TestResult', 'TestCase', 'IsolatedAsyncioTestCase', 'TestSuite',
+           'TextTestRunner', 'TestLoader', 'FunctionTestCase', 'main',
+           'defaultTestLoader', 'SkipTest', 'skip', 'skipIf', 'skipUnless',
+           'expectedFailure', 'TextTestResult', 'installHandler',
+           'registerResult', 'removeResult', 'removeHandler',
+           'addModuleCleanup', 'doModuleCleanups', 'enterModuleContext']
+
+__unittest = True
+
+from .result import TestResult
+from .case import (addModuleCleanup, TestCase, FunctionTestCase, SkipTest, skip,
+                   skipIf, skipUnless, expectedFailure, doModuleCleanups,
+                   enterModuleContext)
+from .suite import BaseTestSuite, TestSuite  # noqa: F401
+from .loader import TestLoader, defaultTestLoader
+from .main import TestProgram, main  # noqa: F401
+from .runner import TextTestRunner, TextTestResult
+from .signals import installHandler, registerResult, removeResult, removeHandler
+# IsolatedAsyncioTestCase will be imported lazily.
+
+
+# Lazy import of IsolatedAsyncioTestCase from .async_case
+# It imports asyncio, which is relatively heavy, but most tests
+# do not need it.
+
+def __dir__():
+    return globals().keys() | {'IsolatedAsyncioTestCase'}
+
+def __getattr__(name):
+    if name == 'IsolatedAsyncioTestCase':
+        global IsolatedAsyncioTestCase
+        from .async_case import IsolatedAsyncioTestCase
+        return IsolatedAsyncioTestCase
+    raise AttributeError(f"module {__name__!r} has no attribute {name!r}")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..e5876f569b5fa8a1bc1be582e8ba7e433f3efa1c
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/__main__.py
@@ -0,0 +1,18 @@
+"""Main entry point"""
+
+import sys
+if sys.argv[0].endswith("__main__.py"):
+    import os.path
+    # We change sys.argv[0] to make help message more useful
+    # use executable without path, unquoted
+    # (it's just a hint anyway)
+    # (if you have spaces in your executable you get what you deserve!)
+    executable = os.path.basename(sys.executable)
+    sys.argv[0] = executable + " -m unittest"
+    del os
+
+__unittest = True
+
+from .main import main
+
+main(module=None)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/_log.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/_log.py
new file mode 100644
index 0000000000000000000000000000000000000000..94868e5bb95eb35fb17c9bea103f04c7d0fd5433
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/_log.py
@@ -0,0 +1,86 @@
+import logging
+import collections
+
+from .case import _BaseTestCaseContext
+
+
+_LoggingWatcher = collections.namedtuple("_LoggingWatcher",
+                                         ["records", "output"])
+
+class _CapturingHandler(logging.Handler):
+    """
+    A logging handler capturing all (raw and formatted) logging output.
+    """
+
+    def __init__(self):
+        logging.Handler.__init__(self)
+        self.watcher = _LoggingWatcher([], [])
+
+    def flush(self):
+        pass
+
+    def emit(self, record):
+        self.watcher.records.append(record)
+        msg = self.format(record)
+        self.watcher.output.append(msg)
+
+
+class _AssertLogsContext(_BaseTestCaseContext):
+    """A context manager for assertLogs() and assertNoLogs() """
+
+    LOGGING_FORMAT = "%(levelname)s:%(name)s:%(message)s"
+
+    def __init__(self, test_case, logger_name, level, no_logs):
+        _BaseTestCaseContext.__init__(self, test_case)
+        self.logger_name = logger_name
+        if level:
+            self.level = logging._nameToLevel.get(level, level)
+        else:
+            self.level = logging.INFO
+        self.msg = None
+        self.no_logs = no_logs
+
+    def __enter__(self):
+        if isinstance(self.logger_name, logging.Logger):
+            logger = self.logger = self.logger_name
+        else:
+            logger = self.logger = logging.getLogger(self.logger_name)
+        formatter = logging.Formatter(self.LOGGING_FORMAT)
+        handler = _CapturingHandler()
+        handler.setLevel(self.level)
+        handler.setFormatter(formatter)
+        self.watcher = handler.watcher
+        self.old_handlers = logger.handlers[:]
+        self.old_level = logger.level
+        self.old_propagate = logger.propagate
+        logger.handlers = [handler]
+        logger.setLevel(self.level)
+        logger.propagate = False
+        if self.no_logs:
+            return
+        return handler.watcher
+
+    def __exit__(self, exc_type, exc_value, tb):
+        self.logger.handlers = self.old_handlers
+        self.logger.propagate = self.old_propagate
+        self.logger.setLevel(self.old_level)
+
+        if exc_type is not None:
+            # let unexpected exceptions pass through
+            return False
+
+        if self.no_logs:
+            # assertNoLogs
+            if len(self.watcher.records) > 0:
+                self._raiseFailure(
+                    "Unexpected logs found: {!r}".format(
+                        self.watcher.output
+                    )
+                )
+
+        else:
+            # assertLogs
+            if len(self.watcher.records) == 0:
+                self._raiseFailure(
+                    "no logs of level {} or higher triggered on {}"
+                    .format(logging.getLevelName(self.level), self.logger.name))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/async_case.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/async_case.py
new file mode 100644
index 0000000000000000000000000000000000000000..a1c0d6c368ce8a48954c9bc7fc3a4f3f4e170073
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/async_case.py
@@ -0,0 +1,158 @@
+import asyncio
+import contextvars
+import inspect
+import warnings
+
+from .case import TestCase
+
+__unittest = True
+
+class IsolatedAsyncioTestCase(TestCase):
+    # Names intentionally have a long prefix
+    # to reduce a chance of clashing with user-defined attributes
+    # from inherited test case
+    #
+    # The class doesn't call loop.run_until_complete(self.setUp()) and family
+    # but uses a different approach:
+    # 1. create a long-running task that reads self.setUp()
+    #    awaitable from queue along with a future
+    # 2. await the awaitable object passing in and set the result
+    #    into the future object
+    # 3. Outer code puts the awaitable and the future object into a queue
+    #    with waiting for the future
+    # The trick is necessary because every run_until_complete() call
+    # creates a new task with embedded ContextVar context.
+    # To share contextvars between setUp(), test and tearDown() we need to execute
+    # them inside the same task.
+
+    # Note: the test case modifies event loop policy if the policy was not instantiated
+    # yet, unless loop_factory=asyncio.EventLoop is set.
+    # asyncio.get_event_loop_policy() creates a default policy on demand but never
+    # returns None
+    # I believe this is not an issue in user level tests but python itself for testing
+    # should reset a policy in every test module
+    # by calling asyncio.set_event_loop_policy(None) in tearDownModule()
+    # or set loop_factory=asyncio.EventLoop
+
+    loop_factory = None
+
+    def __init__(self, methodName='runTest'):
+        super().__init__(methodName)
+        self._asyncioRunner = None
+        self._asyncioTestContext = contextvars.copy_context()
+
+    async def asyncSetUp(self):
+        pass
+
+    async def asyncTearDown(self):
+        pass
+
+    def addAsyncCleanup(self, func, /, *args, **kwargs):
+        # A trivial trampoline to addCleanup()
+        # the function exists because it has a different semantics
+        # and signature:
+        # addCleanup() accepts regular functions
+        # but addAsyncCleanup() accepts coroutines
+        #
+        # We intentionally don't add inspect.iscoroutinefunction() check
+        # for func argument because there is no way
+        # to check for async function reliably:
+        # 1. It can be "async def func()" itself
+        # 2. Class can implement "async def __call__()" method
+        # 3. Regular "def func()" that returns awaitable object
+        self.addCleanup(*(func, *args), **kwargs)
+
+    async def enterAsyncContext(self, cm):
+        """Enters the supplied asynchronous context manager.
+
+        If successful, also adds its __aexit__ method as a cleanup
+        function and returns the result of the __aenter__ method.
+        """
+        # We look up the special methods on the type to match the with
+        # statement.
+        cls = type(cm)
+        try:
+            enter = cls.__aenter__
+            exit = cls.__aexit__
+        except AttributeError:
+            msg = (f"'{cls.__module__}.{cls.__qualname__}' object does "
+                   "not support the asynchronous context manager protocol")
+            try:
+                cls.__enter__
+                cls.__exit__
+            except AttributeError:
+                pass
+            else:
+                msg += (" but it supports the context manager protocol. "
+                        "Did you mean to use enterContext()?")
+            raise TypeError(msg) from None
+        result = await enter(cm)
+        self.addAsyncCleanup(exit, cm, None, None, None)
+        return result
+
+    def _callSetUp(self):
+        # Force loop to be initialized and set as the current loop
+        # so that setUp functions can use get_event_loop() and get the
+        # correct loop instance.
+        self._asyncioRunner.get_loop()
+        self._asyncioTestContext.run(self.setUp)
+        self._callAsync(self.asyncSetUp)
+
+    def _callTestMethod(self, method):
+        result = self._callMaybeAsync(method)
+        if result is not None:
+            msg = (
+                f'It is deprecated to return a value that is not None '
+                f'from a test case ({method} returned {type(result).__name__!r})',
+            )
+            warnings.warn(msg, DeprecationWarning, stacklevel=4)
+
+    def _callTearDown(self):
+        self._callAsync(self.asyncTearDown)
+        self._asyncioTestContext.run(self.tearDown)
+
+    def _callCleanup(self, function, *args, **kwargs):
+        self._callMaybeAsync(function, *args, **kwargs)
+
+    def _callAsync(self, func, /, *args, **kwargs):
+        assert self._asyncioRunner is not None, 'asyncio runner is not initialized'
+        assert inspect.iscoroutinefunction(func), f'{func!r} is not an async function'
+        return self._asyncioRunner.run(
+            func(*args, **kwargs),
+            context=self._asyncioTestContext
+        )
+
+    def _callMaybeAsync(self, func, /, *args, **kwargs):
+        assert self._asyncioRunner is not None, 'asyncio runner is not initialized'
+        if inspect.iscoroutinefunction(func):
+            return self._asyncioRunner.run(
+                func(*args, **kwargs),
+                context=self._asyncioTestContext,
+            )
+        else:
+            return self._asyncioTestContext.run(func, *args, **kwargs)
+
+    def _setupAsyncioRunner(self):
+        assert self._asyncioRunner is None, 'asyncio runner is already initialized'
+        runner = asyncio.Runner(debug=True, loop_factory=self.loop_factory)
+        self._asyncioRunner = runner
+
+    def _tearDownAsyncioRunner(self):
+        runner = self._asyncioRunner
+        runner.close()
+
+    def run(self, result=None):
+        self._setupAsyncioRunner()
+        try:
+            return super().run(result)
+        finally:
+            self._tearDownAsyncioRunner()
+
+    def debug(self):
+        self._setupAsyncioRunner()
+        super().debug()
+        self._tearDownAsyncioRunner()
+
+    def __del__(self):
+        if self._asyncioRunner is not None:
+            self._tearDownAsyncioRunner()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/case.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/case.py
new file mode 100644
index 0000000000000000000000000000000000000000..884fc1b21f64d8ed574cf71d9c5d0dd61d5f4d15
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/case.py
@@ -0,0 +1,1628 @@
+"""Test case implementation"""
+
+import sys
+import functools
+import difflib
+import pprint
+import re
+import warnings
+import collections
+import contextlib
+import traceback
+import time
+import types
+
+from . import result
+from .util import (strclass, safe_repr, _count_diff_all_purpose,
+                   _count_diff_hashable, _common_shorten_repr)
+
+__unittest = True
+
+_subtest_msg_sentinel = object()
+
+DIFF_OMITTED = ('\nDiff is %s characters long. '
+                 'Set self.maxDiff to None to see it.')
+
+class SkipTest(Exception):
+    """
+    Raise this exception in a test to skip it.
+
+    Usually you can use TestCase.skipTest() or one of the skipping decorators
+    instead of raising this directly.
+    """
+
+class _ShouldStop(Exception):
+    """
+    The test should stop.
+    """
+
+class _UnexpectedSuccess(Exception):
+    """
+    The test was supposed to fail, but it didn't!
+    """
+
+
+class _Outcome(object):
+    def __init__(self, result=None):
+        self.expecting_failure = False
+        self.result = result
+        self.result_supports_subtests = hasattr(result, "addSubTest")
+        self.success = True
+        self.expectedFailure = None
+
+    @contextlib.contextmanager
+    def testPartExecutor(self, test_case, subTest=False):
+        old_success = self.success
+        self.success = True
+        try:
+            yield
+        except KeyboardInterrupt:
+            raise
+        except SkipTest as e:
+            self.success = False
+            _addSkip(self.result, test_case, str(e))
+        except _ShouldStop:
+            pass
+        except:
+            exc_info = sys.exc_info()
+            if self.expecting_failure:
+                self.expectedFailure = exc_info
+            else:
+                self.success = False
+                if subTest:
+                    self.result.addSubTest(test_case.test_case, test_case, exc_info)
+                else:
+                    _addError(self.result, test_case, exc_info)
+            # explicitly break a reference cycle:
+            # exc_info -> frame -> exc_info
+            exc_info = None
+        else:
+            if subTest and self.success:
+                self.result.addSubTest(test_case.test_case, test_case, None)
+        finally:
+            self.success = self.success and old_success
+
+
+def _addSkip(result, test_case, reason):
+    addSkip = getattr(result, 'addSkip', None)
+    if addSkip is not None:
+        addSkip(test_case, reason)
+    else:
+        warnings.warn("TestResult has no addSkip method, skips not reported",
+                      RuntimeWarning, 2)
+        result.addSuccess(test_case)
+
+def _addError(result, test, exc_info):
+    if result is not None and exc_info is not None:
+        if issubclass(exc_info[0], test.failureException):
+            result.addFailure(test, exc_info)
+        else:
+            result.addError(test, exc_info)
+
+def _id(obj):
+    return obj
+
+
+def _enter_context(cm, addcleanup):
+    # We look up the special methods on the type to match the with
+    # statement.
+    cls = type(cm)
+    try:
+        enter = cls.__enter__
+        exit = cls.__exit__
+    except AttributeError:
+        msg = (f"'{cls.__module__}.{cls.__qualname__}' object does "
+               "not support the context manager protocol")
+        try:
+            cls.__aenter__
+            cls.__aexit__
+        except AttributeError:
+            pass
+        else:
+            msg += (" but it supports the asynchronous context manager "
+                    "protocol. Did you mean to use enterAsyncContext()?")
+        raise TypeError(msg) from None
+    result = enter(cm)
+    addcleanup(exit, cm, None, None, None)
+    return result
+
+
+_module_cleanups = []
+def addModuleCleanup(function, /, *args, **kwargs):
+    """Same as addCleanup, except the cleanup items are called even if
+    setUpModule fails (unlike tearDownModule)."""
+    _module_cleanups.append((function, args, kwargs))
+
+def enterModuleContext(cm):
+    """Same as enterContext, but module-wide."""
+    return _enter_context(cm, addModuleCleanup)
+
+
+def doModuleCleanups():
+    """Execute all module cleanup functions. Normally called for you after
+    tearDownModule."""
+    exceptions = []
+    while _module_cleanups:
+        function, args, kwargs = _module_cleanups.pop()
+        try:
+            function(*args, **kwargs)
+        except Exception as exc:
+            exceptions.append(exc)
+    if exceptions:
+        # Swallows all but first exception. If a multi-exception handler
+        # gets written we should use that here instead.
+        raise exceptions[0]
+
+
+def skip(reason):
+    """
+    Unconditionally skip a test.
+    """
+    def decorator(test_item):
+        if not isinstance(test_item, type):
+            @functools.wraps(test_item)
+            def skip_wrapper(*args, **kwargs):
+                raise SkipTest(reason)
+            test_item = skip_wrapper
+
+        test_item.__unittest_skip__ = True
+        test_item.__unittest_skip_why__ = reason
+        return test_item
+    if isinstance(reason, types.FunctionType):
+        test_item = reason
+        reason = ''
+        return decorator(test_item)
+    return decorator
+
+def skipIf(condition, reason):
+    """
+    Skip a test if the condition is true.
+    """
+    if condition:
+        return skip(reason)
+    return _id
+
+def skipUnless(condition, reason):
+    """
+    Skip a test unless the condition is true.
+    """
+    if not condition:
+        return skip(reason)
+    return _id
+
+def expectedFailure(test_item):
+    test_item.__unittest_expecting_failure__ = True
+    return test_item
+
+def _is_subtype(expected, basetype):
+    if isinstance(expected, tuple):
+        return all(_is_subtype(e, basetype) for e in expected)
+    return isinstance(expected, type) and issubclass(expected, basetype)
+
+class _BaseTestCaseContext:
+
+    def __init__(self, test_case):
+        self.test_case = test_case
+
+    def _raiseFailure(self, standardMsg):
+        msg = self.test_case._formatMessage(self.msg, standardMsg)
+        raise self.test_case.failureException(msg)
+
+class _AssertRaisesBaseContext(_BaseTestCaseContext):
+
+    def __init__(self, expected, test_case, expected_regex=None):
+        _BaseTestCaseContext.__init__(self, test_case)
+        self.expected = expected
+        self.test_case = test_case
+        if expected_regex is not None:
+            expected_regex = re.compile(expected_regex)
+        self.expected_regex = expected_regex
+        self.obj_name = None
+        self.msg = None
+
+    def handle(self, name, args, kwargs):
+        """
+        If args is empty, assertRaises/Warns is being used as a
+        context manager, so check for a 'msg' kwarg and return self.
+        If args is not empty, call a callable passing positional and keyword
+        arguments.
+        """
+        try:
+            if not _is_subtype(self.expected, self._base_type):
+                raise TypeError('%s() arg 1 must be %s' %
+                                (name, self._base_type_str))
+            if not args:
+                self.msg = kwargs.pop('msg', None)
+                if kwargs:
+                    raise TypeError('%r is an invalid keyword argument for '
+                                    'this function' % (next(iter(kwargs)),))
+                return self
+
+            callable_obj, *args = args
+            try:
+                self.obj_name = callable_obj.__name__
+            except AttributeError:
+                self.obj_name = str(callable_obj)
+            with self:
+                callable_obj(*args, **kwargs)
+        finally:
+            # bpo-23890: manually break a reference cycle
+            self = None
+
+
+class _AssertRaisesContext(_AssertRaisesBaseContext):
+    """A context manager used to implement TestCase.assertRaises* methods."""
+
+    _base_type = BaseException
+    _base_type_str = 'an exception type or tuple of exception types'
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_value, tb):
+        if exc_type is None:
+            try:
+                exc_name = self.expected.__name__
+            except AttributeError:
+                exc_name = str(self.expected)
+            if self.obj_name:
+                self._raiseFailure("{} not raised by {}".format(exc_name,
+                                                                self.obj_name))
+            else:
+                self._raiseFailure("{} not raised".format(exc_name))
+        else:
+            traceback.clear_frames(tb)
+        if not issubclass(exc_type, self.expected):
+            # let unexpected exceptions pass through
+            return False
+        # store exception, without traceback, for later retrieval
+        self.exception = exc_value.with_traceback(None)
+        if self.expected_regex is None:
+            return True
+
+        expected_regex = self.expected_regex
+        if not expected_regex.search(str(exc_value)):
+            self._raiseFailure('"{}" does not match "{}"'.format(
+                     expected_regex.pattern, str(exc_value)))
+        return True
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+class _AssertWarnsContext(_AssertRaisesBaseContext):
+    """A context manager used to implement TestCase.assertWarns* methods."""
+
+    _base_type = Warning
+    _base_type_str = 'a warning type or tuple of warning types'
+
+    def __enter__(self):
+        # The __warningregistry__'s need to be in a pristine state for tests
+        # to work properly.
+        for v in list(sys.modules.values()):
+            if getattr(v, '__warningregistry__', None):
+                v.__warningregistry__ = {}
+        self.warnings_manager = warnings.catch_warnings(record=True)
+        self.warnings = self.warnings_manager.__enter__()
+        warnings.simplefilter("always", self.expected)
+        return self
+
+    def __exit__(self, exc_type, exc_value, tb):
+        self.warnings_manager.__exit__(exc_type, exc_value, tb)
+        if exc_type is not None:
+            # let unexpected exceptions pass through
+            return
+        try:
+            exc_name = self.expected.__name__
+        except AttributeError:
+            exc_name = str(self.expected)
+        first_matching = None
+        for m in self.warnings:
+            w = m.message
+            if not isinstance(w, self.expected):
+                continue
+            if first_matching is None:
+                first_matching = w
+            if (self.expected_regex is not None and
+                not self.expected_regex.search(str(w))):
+                continue
+            # store warning for later retrieval
+            self.warning = w
+            self.filename = m.filename
+            self.lineno = m.lineno
+            return
+        # Now we simply try to choose a helpful failure message
+        if first_matching is not None:
+            self._raiseFailure('"{}" does not match "{}"'.format(
+                     self.expected_regex.pattern, str(first_matching)))
+        if self.obj_name:
+            self._raiseFailure("{} not triggered by {}".format(exc_name,
+                                                               self.obj_name))
+        else:
+            self._raiseFailure("{} not triggered".format(exc_name))
+
+
+class _AssertNotWarnsContext(_AssertWarnsContext):
+
+    def __exit__(self, exc_type, exc_value, tb):
+        self.warnings_manager.__exit__(exc_type, exc_value, tb)
+        if exc_type is not None:
+            # let unexpected exceptions pass through
+            return
+        try:
+            exc_name = self.expected.__name__
+        except AttributeError:
+            exc_name = str(self.expected)
+        for m in self.warnings:
+            w = m.message
+            if isinstance(w, self.expected):
+                self._raiseFailure(f"{exc_name} triggered")
+
+
+class _OrderedChainMap(collections.ChainMap):
+    def __iter__(self):
+        seen = set()
+        for mapping in self.maps:
+            for k in mapping:
+                if k not in seen:
+                    seen.add(k)
+                    yield k
+
+
+class TestCase(object):
+    """A class whose instances are single test cases.
+
+    By default, the test code itself should be placed in a method named
+    'runTest'.
+
+    If the fixture may be used for many test cases, create as
+    many test methods as are needed. When instantiating such a TestCase
+    subclass, specify in the constructor arguments the name of the test method
+    that the instance is to execute.
+
+    Test authors should subclass TestCase for their own tests. Construction
+    and deconstruction of the test's environment ('fixture') can be
+    implemented by overriding the 'setUp' and 'tearDown' methods respectively.
+
+    If it is necessary to override the __init__ method, the base class
+    __init__ method must always be called. It is important that subclasses
+    should not change the signature of their __init__ method, since instances
+    of the classes are instantiated automatically by parts of the framework
+    in order to be run.
+
+    When subclassing TestCase, you can set these attributes:
+    * failureException: determines which exception will be raised when
+        the instance's assertion methods fail; test methods raising this
+        exception will be deemed to have 'failed' rather than 'errored'.
+    * longMessage: determines whether long messages (including repr of
+        objects used in assert methods) will be printed on failure in *addition*
+        to any explicit message passed.
+    * maxDiff: sets the maximum length of a diff in failure messages
+        by assert methods using difflib. It is looked up as an instance
+        attribute so can be configured by individual tests if required.
+    """
+
+    failureException = AssertionError
+
+    longMessage = True
+
+    maxDiff = 80*8
+
+    # If a string is longer than _diffThreshold, use normal comparison instead
+    # of difflib.  See #11763.
+    _diffThreshold = 2**16
+
+    def __init_subclass__(cls, *args, **kwargs):
+        # Attribute used by TestSuite for classSetUp
+        cls._classSetupFailed = False
+        cls._class_cleanups = []
+        super().__init_subclass__(*args, **kwargs)
+
+    def __init__(self, methodName='runTest'):
+        """Create an instance of the class that will use the named test
+           method when executed. Raises a ValueError if the instance does
+           not have a method with the specified name.
+        """
+        self._testMethodName = methodName
+        self._outcome = None
+        self._testMethodDoc = 'No test'
+        try:
+            testMethod = getattr(self, methodName)
+        except AttributeError:
+            if methodName != 'runTest':
+                # we allow instantiation with no explicit method name
+                # but not an *incorrect* or missing method name
+                raise ValueError("no such test method in %s: %s" %
+                      (self.__class__, methodName))
+        else:
+            self._testMethodDoc = testMethod.__doc__
+        self._cleanups = []
+        self._subtest = None
+
+        # Map types to custom assertEqual functions that will compare
+        # instances of said type in more detail to generate a more useful
+        # error message.
+        self._type_equality_funcs = {}
+        self.addTypeEqualityFunc(dict, 'assertDictEqual')
+        self.addTypeEqualityFunc(list, 'assertListEqual')
+        self.addTypeEqualityFunc(tuple, 'assertTupleEqual')
+        self.addTypeEqualityFunc(set, 'assertSetEqual')
+        self.addTypeEqualityFunc(frozenset, 'assertSetEqual')
+        self.addTypeEqualityFunc(str, 'assertMultiLineEqual')
+
+    def addTypeEqualityFunc(self, typeobj, function):
+        """Add a type specific assertEqual style function to compare a type.
+
+        This method is for use by TestCase subclasses that need to register
+        their own type equality functions to provide nicer error messages.
+
+        Args:
+            typeobj: The data type to call this function on when both values
+                    are of the same type in assertEqual().
+            function: The callable taking two arguments and an optional
+                    msg= argument that raises self.failureException with a
+                    useful error message when the two arguments are not equal.
+        """
+        self._type_equality_funcs[typeobj] = function
+
+    def addCleanup(self, function, /, *args, **kwargs):
+        """Add a function, with arguments, to be called when the test is
+        completed. Functions added are called on a LIFO basis and are
+        called after tearDown on test failure or success.
+
+        Cleanup items are called even if setUp fails (unlike tearDown)."""
+        self._cleanups.append((function, args, kwargs))
+
+    def enterContext(self, cm):
+        """Enters the supplied context manager.
+
+        If successful, also adds its __exit__ method as a cleanup
+        function and returns the result of the __enter__ method.
+        """
+        return _enter_context(cm, self.addCleanup)
+
+    @classmethod
+    def addClassCleanup(cls, function, /, *args, **kwargs):
+        """Same as addCleanup, except the cleanup items are called even if
+        setUpClass fails (unlike tearDownClass)."""
+        cls._class_cleanups.append((function, args, kwargs))
+
+    @classmethod
+    def enterClassContext(cls, cm):
+        """Same as enterContext, but class-wide."""
+        return _enter_context(cm, cls.addClassCleanup)
+
+    def setUp(self):
+        "Hook method for setting up the test fixture before exercising it."
+        pass
+
+    def tearDown(self):
+        "Hook method for deconstructing the test fixture after testing it."
+        pass
+
+    @classmethod
+    def setUpClass(cls):
+        "Hook method for setting up class fixture before running tests in the class."
+
+    @classmethod
+    def tearDownClass(cls):
+        "Hook method for deconstructing the class fixture after running all tests in the class."
+
+    def countTestCases(self):
+        return 1
+
+    def defaultTestResult(self):
+        return result.TestResult()
+
+    def shortDescription(self):
+        """Returns a one-line description of the test, or None if no
+        description has been provided.
+
+        The default implementation of this method returns the first line of
+        the specified test method's docstring.
+        """
+        doc = self._testMethodDoc
+        return doc.strip().split("\n")[0].strip() if doc else None
+
+
+    def id(self):
+        return "%s.%s" % (strclass(self.__class__), self._testMethodName)
+
+    def __eq__(self, other):
+        if type(self) is not type(other):
+            return NotImplemented
+
+        return self._testMethodName == other._testMethodName
+
+    def __hash__(self):
+        return hash((type(self), self._testMethodName))
+
+    def __str__(self):
+        return "%s (%s.%s)" % (self._testMethodName, strclass(self.__class__), self._testMethodName)
+
+    def __repr__(self):
+        return "<%s testMethod=%s>" % \
+               (strclass(self.__class__), self._testMethodName)
+
+    @contextlib.contextmanager
+    def subTest(self, msg=_subtest_msg_sentinel, **params):
+        """Return a context manager that will return the enclosed block
+        of code in a subtest identified by the optional message and
+        keyword parameters.  A failure in the subtest marks the test
+        case as failed but resumes execution at the end of the enclosed
+        block, allowing further test code to be executed.
+        """
+        if self._outcome is None or not self._outcome.result_supports_subtests:
+            yield
+            return
+        parent = self._subtest
+        if parent is None:
+            params_map = _OrderedChainMap(params)
+        else:
+            params_map = parent.params.new_child(params)
+        self._subtest = _SubTest(self, msg, params_map)
+        try:
+            with self._outcome.testPartExecutor(self._subtest, subTest=True):
+                yield
+            if not self._outcome.success:
+                result = self._outcome.result
+                if result is not None and result.failfast:
+                    raise _ShouldStop
+            elif self._outcome.expectedFailure:
+                # If the test is expecting a failure, we really want to
+                # stop now and register the expected failure.
+                raise _ShouldStop
+        finally:
+            self._subtest = parent
+
+    def _addExpectedFailure(self, result, exc_info):
+        try:
+            addExpectedFailure = result.addExpectedFailure
+        except AttributeError:
+            warnings.warn("TestResult has no addExpectedFailure method, reporting as passes",
+                          RuntimeWarning)
+            result.addSuccess(self)
+        else:
+            addExpectedFailure(self, exc_info)
+
+    def _addUnexpectedSuccess(self, result):
+        try:
+            addUnexpectedSuccess = result.addUnexpectedSuccess
+        except AttributeError:
+            warnings.warn("TestResult has no addUnexpectedSuccess method, reporting as failure",
+                          RuntimeWarning)
+            # We need to pass an actual exception and traceback to addFailure,
+            # otherwise the legacy result can choke.
+            try:
+                raise _UnexpectedSuccess from None
+            except _UnexpectedSuccess:
+                result.addFailure(self, sys.exc_info())
+        else:
+            addUnexpectedSuccess(self)
+
+    def _addDuration(self, result, elapsed):
+        try:
+            addDuration = result.addDuration
+        except AttributeError:
+            warnings.warn("TestResult has no addDuration method",
+                          RuntimeWarning)
+        else:
+            addDuration(self, elapsed)
+
+    def _callSetUp(self):
+        self.setUp()
+
+    def _callTestMethod(self, method):
+        result = method()
+        if result is not None:
+            import inspect
+            msg = (
+                f'It is deprecated to return a value that is not None '
+                f'from a test case ({method} returned {type(result).__name__!r})'
+            )
+            if inspect.iscoroutine(result):
+                msg += (
+                    '. Maybe you forgot to use IsolatedAsyncioTestCase as the base class?'
+                )
+            warnings.warn(msg, DeprecationWarning, stacklevel=3)
+
+    def _callTearDown(self):
+        self.tearDown()
+
+    def _callCleanup(self, function, /, *args, **kwargs):
+        function(*args, **kwargs)
+
+    def run(self, result=None):
+        if result is None:
+            result = self.defaultTestResult()
+            startTestRun = getattr(result, 'startTestRun', None)
+            stopTestRun = getattr(result, 'stopTestRun', None)
+            if startTestRun is not None:
+                startTestRun()
+        else:
+            stopTestRun = None
+
+        result.startTest(self)
+        try:
+            testMethod = getattr(self, self._testMethodName)
+            if (getattr(self.__class__, "__unittest_skip__", False) or
+                getattr(testMethod, "__unittest_skip__", False)):
+                # If the class or method was skipped.
+                skip_why = (getattr(self.__class__, '__unittest_skip_why__', '')
+                            or getattr(testMethod, '__unittest_skip_why__', ''))
+                _addSkip(result, self, skip_why)
+                return result
+
+            expecting_failure = (
+                getattr(self, "__unittest_expecting_failure__", False) or
+                getattr(testMethod, "__unittest_expecting_failure__", False)
+            )
+            outcome = _Outcome(result)
+            start_time = time.perf_counter()
+            try:
+                self._outcome = outcome
+
+                with outcome.testPartExecutor(self):
+                    self._callSetUp()
+                if outcome.success:
+                    outcome.expecting_failure = expecting_failure
+                    with outcome.testPartExecutor(self):
+                        self._callTestMethod(testMethod)
+                    outcome.expecting_failure = False
+                    with outcome.testPartExecutor(self):
+                        self._callTearDown()
+                self.doCleanups()
+                self._addDuration(result, (time.perf_counter() - start_time))
+
+                if outcome.success:
+                    if expecting_failure:
+                        if outcome.expectedFailure:
+                            self._addExpectedFailure(result, outcome.expectedFailure)
+                        else:
+                            self._addUnexpectedSuccess(result)
+                    else:
+                        result.addSuccess(self)
+                return result
+            finally:
+                # explicitly break reference cycle:
+                # outcome.expectedFailure -> frame -> outcome -> outcome.expectedFailure
+                outcome.expectedFailure = None
+                outcome = None
+
+                # clear the outcome, no more needed
+                self._outcome = None
+
+        finally:
+            result.stopTest(self)
+            if stopTestRun is not None:
+                stopTestRun()
+
+    def doCleanups(self):
+        """Execute all cleanup functions. Normally called for you after
+        tearDown."""
+        outcome = self._outcome or _Outcome()
+        while self._cleanups:
+            function, args, kwargs = self._cleanups.pop()
+            with outcome.testPartExecutor(self):
+                self._callCleanup(function, *args, **kwargs)
+
+        # return this for backwards compatibility
+        # even though we no longer use it internally
+        return outcome.success
+
+    @classmethod
+    def doClassCleanups(cls):
+        """Execute all class cleanup functions. Normally called for you after
+        tearDownClass."""
+        cls.tearDown_exceptions = []
+        while cls._class_cleanups:
+            function, args, kwargs = cls._class_cleanups.pop()
+            try:
+                function(*args, **kwargs)
+            except Exception:
+                cls.tearDown_exceptions.append(sys.exc_info())
+
+    def __call__(self, *args, **kwds):
+        return self.run(*args, **kwds)
+
+    def debug(self):
+        """Run the test without collecting errors in a TestResult"""
+        testMethod = getattr(self, self._testMethodName)
+        if (getattr(self.__class__, "__unittest_skip__", False) or
+            getattr(testMethod, "__unittest_skip__", False)):
+            # If the class or method was skipped.
+            skip_why = (getattr(self.__class__, '__unittest_skip_why__', '')
+                        or getattr(testMethod, '__unittest_skip_why__', ''))
+            raise SkipTest(skip_why)
+
+        self._callSetUp()
+        self._callTestMethod(testMethod)
+        self._callTearDown()
+        while self._cleanups:
+            function, args, kwargs = self._cleanups.pop()
+            self._callCleanup(function, *args, **kwargs)
+
+    def skipTest(self, reason):
+        """Skip this test."""
+        raise SkipTest(reason)
+
+    def fail(self, msg=None):
+        """Fail immediately, with the given message."""
+        raise self.failureException(msg)
+
+    def assertFalse(self, expr, msg=None):
+        """Check that the expression is false."""
+        if expr:
+            msg = self._formatMessage(msg, "%s is not false" % safe_repr(expr))
+            raise self.failureException(msg)
+
+    def assertTrue(self, expr, msg=None):
+        """Check that the expression is true."""
+        if not expr:
+            msg = self._formatMessage(msg, "%s is not true" % safe_repr(expr))
+            raise self.failureException(msg)
+
+    def _formatMessage(self, msg, standardMsg):
+        """Honour the longMessage attribute when generating failure messages.
+        If longMessage is False this means:
+        * Use only an explicit message if it is provided
+        * Otherwise use the standard message for the assert
+
+        If longMessage is True:
+        * Use the standard message
+        * If an explicit message is provided, plus ' : ' and the explicit message
+        """
+        if not self.longMessage:
+            return msg or standardMsg
+        if msg is None:
+            return standardMsg
+        try:
+            # don't switch to '{}' formatting in Python 2.X
+            # it changes the way unicode input is handled
+            return '%s : %s' % (standardMsg, msg)
+        except UnicodeDecodeError:
+            return  '%s : %s' % (safe_repr(standardMsg), safe_repr(msg))
+
+    def assertRaises(self, expected_exception, *args, **kwargs):
+        """Fail unless an exception of class expected_exception is raised
+           by the callable when invoked with specified positional and
+           keyword arguments. If a different type of exception is
+           raised, it will not be caught, and the test case will be
+           deemed to have suffered an error, exactly as for an
+           unexpected exception.
+
+           If called with the callable and arguments omitted, will return a
+           context object used like this::
+
+                with self.assertRaises(SomeException):
+                    do_something()
+
+           An optional keyword argument 'msg' can be provided when assertRaises
+           is used as a context object.
+
+           The context manager keeps a reference to the exception as
+           the 'exception' attribute. This allows you to inspect the
+           exception after the assertion::
+
+               with self.assertRaises(SomeException) as cm:
+                   do_something()
+               the_exception = cm.exception
+               self.assertEqual(the_exception.error_code, 3)
+        """
+        context = _AssertRaisesContext(expected_exception, self)
+        try:
+            return context.handle('assertRaises', args, kwargs)
+        finally:
+            # bpo-23890: manually break a reference cycle
+            context = None
+
+    def assertWarns(self, expected_warning, *args, **kwargs):
+        """Fail unless a warning of class warnClass is triggered
+           by the callable when invoked with specified positional and
+           keyword arguments.  If a different type of warning is
+           triggered, it will not be handled: depending on the other
+           warning filtering rules in effect, it might be silenced, printed
+           out, or raised as an exception.
+
+           If called with the callable and arguments omitted, will return a
+           context object used like this::
+
+                with self.assertWarns(SomeWarning):
+                    do_something()
+
+           An optional keyword argument 'msg' can be provided when assertWarns
+           is used as a context object.
+
+           The context manager keeps a reference to the first matching
+           warning as the 'warning' attribute; similarly, the 'filename'
+           and 'lineno' attributes give you information about the line
+           of Python code from which the warning was triggered.
+           This allows you to inspect the warning after the assertion::
+
+               with self.assertWarns(SomeWarning) as cm:
+                   do_something()
+               the_warning = cm.warning
+               self.assertEqual(the_warning.some_attribute, 147)
+        """
+        context = _AssertWarnsContext(expected_warning, self)
+        return context.handle('assertWarns', args, kwargs)
+
+    def _assertNotWarns(self, expected_warning, *args, **kwargs):
+        """The opposite of assertWarns. Private due to low demand."""
+        context = _AssertNotWarnsContext(expected_warning, self)
+        return context.handle('_assertNotWarns', args, kwargs)
+
+    def assertLogs(self, logger=None, level=None):
+        """Fail unless a log message of level *level* or higher is emitted
+        on *logger_name* or its children.  If omitted, *level* defaults to
+        INFO and *logger* defaults to the root logger.
+
+        This method must be used as a context manager, and will yield
+        a recording object with two attributes: `output` and `records`.
+        At the end of the context manager, the `output` attribute will
+        be a list of the matching formatted log messages and the
+        `records` attribute will be a list of the corresponding LogRecord
+        objects.
+
+        Example::
+
+            with self.assertLogs('foo', level='INFO') as cm:
+                logging.getLogger('foo').info('first message')
+                logging.getLogger('foo.bar').error('second message')
+            self.assertEqual(cm.output, ['INFO:foo:first message',
+                                         'ERROR:foo.bar:second message'])
+        """
+        # Lazy import to avoid importing logging if it is not needed.
+        from ._log import _AssertLogsContext
+        return _AssertLogsContext(self, logger, level, no_logs=False)
+
+    def assertNoLogs(self, logger=None, level=None):
+        """ Fail unless no log messages of level *level* or higher are emitted
+        on *logger_name* or its children.
+
+        This method must be used as a context manager.
+        """
+        from ._log import _AssertLogsContext
+        return _AssertLogsContext(self, logger, level, no_logs=True)
+
+    def _getAssertEqualityFunc(self, first, second):
+        """Get a detailed comparison function for the types of the two args.
+
+        Returns: A callable accepting (first, second, msg=None) that will
+        raise a failure exception if first != second with a useful human
+        readable error message for those types.
+        """
+        #
+        # NOTE(gregory.p.smith): I considered isinstance(first, type(second))
+        # and vice versa.  I opted for the conservative approach in case
+        # subclasses are not intended to be compared in detail to their super
+        # class instances using a type equality func.  This means testing
+        # subtypes won't automagically use the detailed comparison.  Callers
+        # should use their type specific assertSpamEqual method to compare
+        # subclasses if the detailed comparison is desired and appropriate.
+        # See the discussion in http://bugs.python.org/issue2578.
+        #
+        if type(first) is type(second):
+            asserter = self._type_equality_funcs.get(type(first))
+            if asserter is not None:
+                if isinstance(asserter, str):
+                    asserter = getattr(self, asserter)
+                return asserter
+
+        return self._baseAssertEqual
+
+    def _baseAssertEqual(self, first, second, msg=None):
+        """The default assertEqual implementation, not type specific."""
+        if not first == second:
+            standardMsg = '%s != %s' % _common_shorten_repr(first, second)
+            msg = self._formatMessage(msg, standardMsg)
+            raise self.failureException(msg)
+
+    def assertEqual(self, first, second, msg=None):
+        """Fail if the two objects are unequal as determined by the '=='
+           operator.
+        """
+        assertion_func = self._getAssertEqualityFunc(first, second)
+        assertion_func(first, second, msg=msg)
+
+    def assertNotEqual(self, first, second, msg=None):
+        """Fail if the two objects are equal as determined by the '!='
+           operator.
+        """
+        if not first != second:
+            msg = self._formatMessage(msg, '%s == %s' % (safe_repr(first),
+                                                          safe_repr(second)))
+            raise self.failureException(msg)
+
+    def assertAlmostEqual(self, first, second, places=None, msg=None,
+                          delta=None):
+        """Fail if the two objects are unequal as determined by their
+           difference rounded to the given number of decimal places
+           (default 7) and comparing to zero, or by comparing that the
+           difference between the two objects is more than the given
+           delta.
+
+           Note that decimal places (from zero) are usually not the same
+           as significant digits (measured from the most significant digit).
+
+           If the two objects compare equal then they will automatically
+           compare almost equal.
+        """
+        if first == second:
+            # shortcut
+            return
+        if delta is not None and places is not None:
+            raise TypeError("specify delta or places not both")
+
+        diff = abs(first - second)
+        if delta is not None:
+            if diff <= delta:
+                return
+
+            standardMsg = '%s != %s within %s delta (%s difference)' % (
+                safe_repr(first),
+                safe_repr(second),
+                safe_repr(delta),
+                safe_repr(diff))
+        else:
+            if places is None:
+                places = 7
+
+            if round(diff, places) == 0:
+                return
+
+            standardMsg = '%s != %s within %r places (%s difference)' % (
+                safe_repr(first),
+                safe_repr(second),
+                places,
+                safe_repr(diff))
+        msg = self._formatMessage(msg, standardMsg)
+        raise self.failureException(msg)
+
+    def assertNotAlmostEqual(self, first, second, places=None, msg=None,
+                             delta=None):
+        """Fail if the two objects are equal as determined by their
+           difference rounded to the given number of decimal places
+           (default 7) and comparing to zero, or by comparing that the
+           difference between the two objects is less than the given delta.
+
+           Note that decimal places (from zero) are usually not the same
+           as significant digits (measured from the most significant digit).
+
+           Objects that are equal automatically fail.
+        """
+        if delta is not None and places is not None:
+            raise TypeError("specify delta or places not both")
+        diff = abs(first - second)
+        if delta is not None:
+            if not (first == second) and diff > delta:
+                return
+            standardMsg = '%s == %s within %s delta (%s difference)' % (
+                safe_repr(first),
+                safe_repr(second),
+                safe_repr(delta),
+                safe_repr(diff))
+        else:
+            if places is None:
+                places = 7
+            if not (first == second) and round(diff, places) != 0:
+                return
+            standardMsg = '%s == %s within %r places' % (safe_repr(first),
+                                                         safe_repr(second),
+                                                         places)
+
+        msg = self._formatMessage(msg, standardMsg)
+        raise self.failureException(msg)
+
+    def assertSequenceEqual(self, seq1, seq2, msg=None, seq_type=None):
+        """An equality assertion for ordered sequences (like lists and tuples).
+
+        For the purposes of this function, a valid ordered sequence type is one
+        which can be indexed, has a length, and has an equality operator.
+
+        Args:
+            seq1: The first sequence to compare.
+            seq2: The second sequence to compare.
+            seq_type: The expected datatype of the sequences, or None if no
+                    datatype should be enforced.
+            msg: Optional message to use on failure instead of a list of
+                    differences.
+        """
+        if seq_type is not None:
+            seq_type_name = seq_type.__name__
+            if not isinstance(seq1, seq_type):
+                raise self.failureException('First sequence is not a %s: %s'
+                                        % (seq_type_name, safe_repr(seq1)))
+            if not isinstance(seq2, seq_type):
+                raise self.failureException('Second sequence is not a %s: %s'
+                                        % (seq_type_name, safe_repr(seq2)))
+        else:
+            seq_type_name = "sequence"
+
+        differing = None
+        try:
+            len1 = len(seq1)
+        except (TypeError, NotImplementedError):
+            differing = 'First %s has no length.    Non-sequence?' % (
+                    seq_type_name)
+
+        if differing is None:
+            try:
+                len2 = len(seq2)
+            except (TypeError, NotImplementedError):
+                differing = 'Second %s has no length.    Non-sequence?' % (
+                        seq_type_name)
+
+        if differing is None:
+            if seq1 == seq2:
+                return
+
+            differing = '%ss differ: %s != %s\n' % (
+                    (seq_type_name.capitalize(),) +
+                    _common_shorten_repr(seq1, seq2))
+
+            for i in range(min(len1, len2)):
+                try:
+                    item1 = seq1[i]
+                except (TypeError, IndexError, NotImplementedError):
+                    differing += ('\nUnable to index element %d of first %s\n' %
+                                 (i, seq_type_name))
+                    break
+
+                try:
+                    item2 = seq2[i]
+                except (TypeError, IndexError, NotImplementedError):
+                    differing += ('\nUnable to index element %d of second %s\n' %
+                                 (i, seq_type_name))
+                    break
+
+                if item1 != item2:
+                    differing += ('\nFirst differing element %d:\n%s\n%s\n' %
+                                 ((i,) + _common_shorten_repr(item1, item2)))
+                    break
+            else:
+                if (len1 == len2 and seq_type is None and
+                    type(seq1) != type(seq2)):
+                    # The sequences are the same, but have differing types.
+                    return
+
+            if len1 > len2:
+                differing += ('\nFirst %s contains %d additional '
+                             'elements.\n' % (seq_type_name, len1 - len2))
+                try:
+                    differing += ('First extra element %d:\n%s\n' %
+                                  (len2, safe_repr(seq1[len2])))
+                except (TypeError, IndexError, NotImplementedError):
+                    differing += ('Unable to index element %d '
+                                  'of first %s\n' % (len2, seq_type_name))
+            elif len1 < len2:
+                differing += ('\nSecond %s contains %d additional '
+                             'elements.\n' % (seq_type_name, len2 - len1))
+                try:
+                    differing += ('First extra element %d:\n%s\n' %
+                                  (len1, safe_repr(seq2[len1])))
+                except (TypeError, IndexError, NotImplementedError):
+                    differing += ('Unable to index element %d '
+                                  'of second %s\n' % (len1, seq_type_name))
+        standardMsg = differing
+        diffMsg = '\n' + '\n'.join(
+            difflib.ndiff(pprint.pformat(seq1).splitlines(),
+                          pprint.pformat(seq2).splitlines()))
+
+        standardMsg = self._truncateMessage(standardMsg, diffMsg)
+        msg = self._formatMessage(msg, standardMsg)
+        self.fail(msg)
+
+    def _truncateMessage(self, message, diff):
+        max_diff = self.maxDiff
+        if max_diff is None or len(diff) <= max_diff:
+            return message + diff
+        return message + (DIFF_OMITTED % len(diff))
+
+    def assertListEqual(self, list1, list2, msg=None):
+        """A list-specific equality assertion.
+
+        Args:
+            list1: The first list to compare.
+            list2: The second list to compare.
+            msg: Optional message to use on failure instead of a list of
+                    differences.
+
+        """
+        self.assertSequenceEqual(list1, list2, msg, seq_type=list)
+
+    def assertTupleEqual(self, tuple1, tuple2, msg=None):
+        """A tuple-specific equality assertion.
+
+        Args:
+            tuple1: The first tuple to compare.
+            tuple2: The second tuple to compare.
+            msg: Optional message to use on failure instead of a list of
+                    differences.
+        """
+        self.assertSequenceEqual(tuple1, tuple2, msg, seq_type=tuple)
+
+    def assertSetEqual(self, set1, set2, msg=None):
+        """A set-specific equality assertion.
+
+        Args:
+            set1: The first set to compare.
+            set2: The second set to compare.
+            msg: Optional message to use on failure instead of a list of
+                    differences.
+
+        assertSetEqual uses ducktyping to support different types of sets, and
+        is optimized for sets specifically (parameters must support a
+        difference method).
+        """
+        try:
+            difference1 = set1.difference(set2)
+        except TypeError as e:
+            self.fail('invalid type when attempting set difference: %s' % e)
+        except AttributeError as e:
+            self.fail('first argument does not support set difference: %s' % e)
+
+        try:
+            difference2 = set2.difference(set1)
+        except TypeError as e:
+            self.fail('invalid type when attempting set difference: %s' % e)
+        except AttributeError as e:
+            self.fail('second argument does not support set difference: %s' % e)
+
+        if not (difference1 or difference2):
+            return
+
+        lines = []
+        if difference1:
+            lines.append('Items in the first set but not the second:')
+            for item in difference1:
+                lines.append(repr(item))
+        if difference2:
+            lines.append('Items in the second set but not the first:')
+            for item in difference2:
+                lines.append(repr(item))
+
+        standardMsg = '\n'.join(lines)
+        self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIn(self, member, container, msg=None):
+        """Just like self.assertTrue(a in b), but with a nicer default message."""
+        if member not in container:
+            standardMsg = '%s not found in %s' % (safe_repr(member),
+                                                  safe_repr(container))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotIn(self, member, container, msg=None):
+        """Just like self.assertTrue(a not in b), but with a nicer default message."""
+        if member in container:
+            standardMsg = '%s unexpectedly found in %s' % (safe_repr(member),
+                                                        safe_repr(container))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIs(self, expr1, expr2, msg=None):
+        """Just like self.assertTrue(a is b), but with a nicer default message."""
+        if expr1 is not expr2:
+            standardMsg = '%s is not %s' % (safe_repr(expr1),
+                                             safe_repr(expr2))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIsNot(self, expr1, expr2, msg=None):
+        """Just like self.assertTrue(a is not b), but with a nicer default message."""
+        if expr1 is expr2:
+            standardMsg = 'unexpectedly identical: %s' % (safe_repr(expr1),)
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertDictEqual(self, d1, d2, msg=None):
+        self.assertIsInstance(d1, dict, 'First argument is not a dictionary')
+        self.assertIsInstance(d2, dict, 'Second argument is not a dictionary')
+
+        if d1 != d2:
+            standardMsg = '%s != %s' % _common_shorten_repr(d1, d2)
+            diff = ('\n' + '\n'.join(difflib.ndiff(
+                           pprint.pformat(d1).splitlines(),
+                           pprint.pformat(d2).splitlines())))
+            standardMsg = self._truncateMessage(standardMsg, diff)
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertCountEqual(self, first, second, msg=None):
+        """Asserts that two iterables have the same elements, the same number of
+        times, without regard to order.
+
+            self.assertEqual(Counter(list(first)),
+                             Counter(list(second)))
+
+         Example:
+            - [0, 1, 1] and [1, 0, 1] compare equal.
+            - [0, 0, 1] and [0, 1] compare unequal.
+
+        """
+        first_seq, second_seq = list(first), list(second)
+        try:
+            first = collections.Counter(first_seq)
+            second = collections.Counter(second_seq)
+        except TypeError:
+            # Handle case with unhashable elements
+            differences = _count_diff_all_purpose(first_seq, second_seq)
+        else:
+            if first == second:
+                return
+            differences = _count_diff_hashable(first_seq, second_seq)
+
+        if differences:
+            standardMsg = 'Element counts were not equal:\n'
+            lines = ['First has %d, Second has %d:  %r' % diff for diff in differences]
+            diffMsg = '\n'.join(lines)
+            standardMsg = self._truncateMessage(standardMsg, diffMsg)
+            msg = self._formatMessage(msg, standardMsg)
+            self.fail(msg)
+
+    def assertMultiLineEqual(self, first, second, msg=None):
+        """Assert that two multi-line strings are equal."""
+        self.assertIsInstance(first, str, "First argument is not a string")
+        self.assertIsInstance(second, str, "Second argument is not a string")
+
+        if first != second:
+            # Don't use difflib if the strings are too long
+            if (len(first) > self._diffThreshold or
+                len(second) > self._diffThreshold):
+                self._baseAssertEqual(first, second, msg)
+
+            # Append \n to both strings if either is missing the \n.
+            # This allows the final ndiff to show the \n difference. The
+            # exception here is if the string is empty, in which case no
+            # \n should be added
+            first_presplit = first
+            second_presplit = second
+            if first and second:
+                if first[-1] != '\n' or second[-1] != '\n':
+                    first_presplit += '\n'
+                    second_presplit += '\n'
+            elif second and second[-1] != '\n':
+                second_presplit += '\n'
+            elif first and first[-1] != '\n':
+                first_presplit += '\n'
+
+            firstlines = first_presplit.splitlines(keepends=True)
+            secondlines = second_presplit.splitlines(keepends=True)
+
+            # Generate the message and diff, then raise the exception
+            standardMsg = '%s != %s' % _common_shorten_repr(first, second)
+            diff = '\n' + ''.join(difflib.ndiff(firstlines, secondlines))
+            standardMsg = self._truncateMessage(standardMsg, diff)
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertLess(self, a, b, msg=None):
+        """Just like self.assertTrue(a < b), but with a nicer default message."""
+        if not a < b:
+            standardMsg = '%s not less than %s' % (safe_repr(a), safe_repr(b))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertLessEqual(self, a, b, msg=None):
+        """Just like self.assertTrue(a <= b), but with a nicer default message."""
+        if not a <= b:
+            standardMsg = '%s not less than or equal to %s' % (safe_repr(a), safe_repr(b))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertGreater(self, a, b, msg=None):
+        """Just like self.assertTrue(a > b), but with a nicer default message."""
+        if not a > b:
+            standardMsg = '%s not greater than %s' % (safe_repr(a), safe_repr(b))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertGreaterEqual(self, a, b, msg=None):
+        """Just like self.assertTrue(a >= b), but with a nicer default message."""
+        if not a >= b:
+            standardMsg = '%s not greater than or equal to %s' % (safe_repr(a), safe_repr(b))
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIsNone(self, obj, msg=None):
+        """Same as self.assertTrue(obj is None), with a nicer default message."""
+        if obj is not None:
+            standardMsg = '%s is not None' % (safe_repr(obj),)
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIsNotNone(self, obj, msg=None):
+        """Included for symmetry with assertIsNone."""
+        if obj is None:
+            standardMsg = 'unexpectedly None'
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIsInstance(self, obj, cls, msg=None):
+        """Same as self.assertTrue(isinstance(obj, cls)), with a nicer
+        default message."""
+        if not isinstance(obj, cls):
+            if isinstance(cls, tuple):
+                standardMsg = f'{safe_repr(obj)} is not an instance of any of {cls!r}'
+            else:
+                standardMsg = f'{safe_repr(obj)} is not an instance of {cls!r}'
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotIsInstance(self, obj, cls, msg=None):
+        """Included for symmetry with assertIsInstance."""
+        if isinstance(obj, cls):
+            if isinstance(cls, tuple):
+                for x in cls:
+                    if isinstance(obj, x):
+                        cls = x
+                        break
+            standardMsg = f'{safe_repr(obj)} is an instance of {cls!r}'
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertIsSubclass(self, cls, superclass, msg=None):
+        try:
+            if issubclass(cls, superclass):
+                return
+        except TypeError:
+            if not isinstance(cls, type):
+                self.fail(self._formatMessage(msg, f'{cls!r} is not a class'))
+            raise
+        if isinstance(superclass, tuple):
+            standardMsg = f'{cls!r} is not a subclass of any of {superclass!r}'
+        else:
+            standardMsg = f'{cls!r} is not a subclass of {superclass!r}'
+        self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotIsSubclass(self, cls, superclass, msg=None):
+        try:
+            if not issubclass(cls, superclass):
+                return
+        except TypeError:
+            if not isinstance(cls, type):
+                self.fail(self._formatMessage(msg, f'{cls!r} is not a class'))
+            raise
+        if isinstance(superclass, tuple):
+            for x in superclass:
+                if issubclass(cls, x):
+                    superclass = x
+                    break
+        standardMsg = f'{cls!r} is a subclass of {superclass!r}'
+        self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertHasAttr(self, obj, name, msg=None):
+        if not hasattr(obj, name):
+            if isinstance(obj, types.ModuleType):
+                standardMsg = f'module {obj.__name__!r} has no attribute {name!r}'
+            elif isinstance(obj, type):
+                standardMsg = f'type object {obj.__name__!r} has no attribute {name!r}'
+            else:
+                standardMsg = f'{type(obj).__name__!r} object has no attribute {name!r}'
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotHasAttr(self, obj, name, msg=None):
+        if hasattr(obj, name):
+            if isinstance(obj, types.ModuleType):
+                standardMsg = f'module {obj.__name__!r} has unexpected attribute {name!r}'
+            elif isinstance(obj, type):
+                standardMsg = f'type object {obj.__name__!r} has unexpected attribute {name!r}'
+            else:
+                standardMsg = f'{type(obj).__name__!r} object has unexpected attribute {name!r}'
+            self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertRaisesRegex(self, expected_exception, expected_regex,
+                          *args, **kwargs):
+        """Asserts that the message in a raised exception matches a regex.
+
+        Args:
+            expected_exception: Exception class expected to be raised.
+            expected_regex: Regex (re.Pattern object or string) expected
+                    to be found in error message.
+            args: Function to be called and extra positional args.
+            kwargs: Extra kwargs.
+            msg: Optional message used in case of failure. Can only be used
+                    when assertRaisesRegex is used as a context manager.
+        """
+        context = _AssertRaisesContext(expected_exception, self, expected_regex)
+        return context.handle('assertRaisesRegex', args, kwargs)
+
+    def assertWarnsRegex(self, expected_warning, expected_regex,
+                         *args, **kwargs):
+        """Asserts that the message in a triggered warning matches a regexp.
+        Basic functioning is similar to assertWarns() with the addition
+        that only warnings whose messages also match the regular expression
+        are considered successful matches.
+
+        Args:
+            expected_warning: Warning class expected to be triggered.
+            expected_regex: Regex (re.Pattern object or string) expected
+                    to be found in error message.
+            args: Function to be called and extra positional args.
+            kwargs: Extra kwargs.
+            msg: Optional message used in case of failure. Can only be used
+                    when assertWarnsRegex is used as a context manager.
+        """
+        context = _AssertWarnsContext(expected_warning, self, expected_regex)
+        return context.handle('assertWarnsRegex', args, kwargs)
+
+    def assertRegex(self, text, expected_regex, msg=None):
+        """Fail the test unless the text matches the regular expression."""
+        if isinstance(expected_regex, (str, bytes)):
+            assert expected_regex, "expected_regex must not be empty."
+            expected_regex = re.compile(expected_regex)
+        if not expected_regex.search(text):
+            standardMsg = "Regex didn't match: %r not found in %r" % (
+                expected_regex.pattern, text)
+            # _formatMessage ensures the longMessage option is respected
+            msg = self._formatMessage(msg, standardMsg)
+            raise self.failureException(msg)
+
+    def assertNotRegex(self, text, unexpected_regex, msg=None):
+        """Fail the test if the text matches the regular expression."""
+        if isinstance(unexpected_regex, (str, bytes)):
+            unexpected_regex = re.compile(unexpected_regex)
+        match = unexpected_regex.search(text)
+        if match:
+            standardMsg = 'Regex matched: %r matches %r in %r' % (
+                text[match.start() : match.end()],
+                unexpected_regex.pattern,
+                text)
+            # _formatMessage ensures the longMessage option is respected
+            msg = self._formatMessage(msg, standardMsg)
+            raise self.failureException(msg)
+
+    def _tail_type_check(self, s, tails, msg):
+        if not isinstance(tails, tuple):
+            tails = (tails,)
+        for tail in tails:
+            if isinstance(tail, str):
+                if not isinstance(s, str):
+                    self.fail(self._formatMessage(msg,
+                            f'Expected str, not {type(s).__name__}'))
+            elif isinstance(tail, (bytes, bytearray)):
+                if not isinstance(s, (bytes, bytearray)):
+                    self.fail(self._formatMessage(msg,
+                            f'Expected bytes, not {type(s).__name__}'))
+
+    def assertStartsWith(self, s, prefix, msg=None):
+        try:
+            if s.startswith(prefix):
+                return
+        except (AttributeError, TypeError):
+            self._tail_type_check(s, prefix, msg)
+            raise
+        a = safe_repr(s, short=True)
+        b = safe_repr(prefix)
+        if isinstance(prefix, tuple):
+            standardMsg = f"{a} doesn't start with any of {b}"
+        else:
+            standardMsg = f"{a} doesn't start with {b}"
+        self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotStartsWith(self, s, prefix, msg=None):
+        try:
+            if not s.startswith(prefix):
+                return
+        except (AttributeError, TypeError):
+            self._tail_type_check(s, prefix, msg)
+            raise
+        if isinstance(prefix, tuple):
+            for x in prefix:
+                if s.startswith(x):
+                    prefix = x
+                    break
+        a = safe_repr(s, short=True)
+        b = safe_repr(prefix)
+        self.fail(self._formatMessage(msg, f"{a} starts with {b}"))
+
+    def assertEndsWith(self, s, suffix, msg=None):
+        try:
+            if s.endswith(suffix):
+                return
+        except (AttributeError, TypeError):
+            self._tail_type_check(s, suffix, msg)
+            raise
+        a = safe_repr(s, short=True)
+        b = safe_repr(suffix)
+        if isinstance(suffix, tuple):
+            standardMsg = f"{a} doesn't end with any of {b}"
+        else:
+            standardMsg = f"{a} doesn't end with {b}"
+        self.fail(self._formatMessage(msg, standardMsg))
+
+    def assertNotEndsWith(self, s, suffix, msg=None):
+        try:
+            if not s.endswith(suffix):
+                return
+        except (AttributeError, TypeError):
+            self._tail_type_check(s, suffix, msg)
+            raise
+        if isinstance(suffix, tuple):
+            for x in suffix:
+                if s.endswith(x):
+                    suffix = x
+                    break
+        a = safe_repr(s, short=True)
+        b = safe_repr(suffix)
+        self.fail(self._formatMessage(msg, f"{a} ends with {b}"))
+
+
+class FunctionTestCase(TestCase):
+    """A test case that wraps a test function.
+
+    This is useful for slipping pre-existing test functions into the
+    unittest framework. Optionally, set-up and tidy-up functions can be
+    supplied. As with TestCase, the tidy-up ('tearDown') function will
+    always be called if the set-up ('setUp') function ran successfully.
+    """
+
+    def __init__(self, testFunc, setUp=None, tearDown=None, description=None):
+        super(FunctionTestCase, self).__init__()
+        self._setUpFunc = setUp
+        self._tearDownFunc = tearDown
+        self._testFunc = testFunc
+        self._description = description
+
+    def setUp(self):
+        if self._setUpFunc is not None:
+            self._setUpFunc()
+
+    def tearDown(self):
+        if self._tearDownFunc is not None:
+            self._tearDownFunc()
+
+    def runTest(self):
+        self._testFunc()
+
+    def id(self):
+        return self._testFunc.__name__
+
+    def __eq__(self, other):
+        if not isinstance(other, self.__class__):
+            return NotImplemented
+
+        return self._setUpFunc == other._setUpFunc and \
+               self._tearDownFunc == other._tearDownFunc and \
+               self._testFunc == other._testFunc and \
+               self._description == other._description
+
+    def __hash__(self):
+        return hash((type(self), self._setUpFunc, self._tearDownFunc,
+                     self._testFunc, self._description))
+
+    def __str__(self):
+        return "%s (%s)" % (strclass(self.__class__),
+                            self._testFunc.__name__)
+
+    def __repr__(self):
+        return "<%s tec=%s>" % (strclass(self.__class__),
+                                     self._testFunc)
+
+    def shortDescription(self):
+        if self._description is not None:
+            return self._description
+        doc = self._testFunc.__doc__
+        return doc and doc.split("\n")[0].strip() or None
+
+
+class _SubTest(TestCase):
+
+    def __init__(self, test_case, message, params):
+        super().__init__()
+        self._message = message
+        self.test_case = test_case
+        self.params = params
+        self.failureException = test_case.failureException
+
+    def runTest(self):
+        raise NotImplementedError("subtests cannot be run directly")
+
+    def _subDescription(self):
+        parts = []
+        if self._message is not _subtest_msg_sentinel:
+            parts.append("[{}]".format(self._message))
+        if self.params:
+            params_desc = ', '.join(
+                "{}={!r}".format(k, v)
+                for (k, v) in self.params.items())
+            parts.append("({})".format(params_desc))
+        return " ".join(parts) or '(<subtest>)'
+
+    def id(self):
+        return "{} {}".format(self.test_case.id(), self._subDescription())
+
+    def shortDescription(self):
+        """Returns a one-line description of the subtest, or None if no
+        description has been provided.
+        """
+        return self.test_case.shortDescription()
+
+    def __str__(self):
+        return "{} {}".format(self.test_case, self._subDescription())
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/loader.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/loader.py
new file mode 100644
index 0000000000000000000000000000000000000000..a52950dad224ee7dbf44ae7c6cdc1d4d17a2fb94
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/loader.py
@@ -0,0 +1,484 @@
+"""Loading unittests."""
+
+import os
+import re
+import sys
+import traceback
+import types
+import functools
+
+from fnmatch import fnmatch, fnmatchcase
+
+from . import case, suite, util
+
+__unittest = True
+
+# what about .pyc (etc)
+# we would need to avoid loading the same tests multiple times
+# from '.py', *and* '.pyc'
+VALID_MODULE_NAME = re.compile(r'[_a-z]\w*\.py$', re.IGNORECASE)
+
+
+class _FailedTest(case.TestCase):
+    _testMethodName = None
+
+    def __init__(self, method_name, exception):
+        self._exception = exception
+        super(_FailedTest, self).__init__(method_name)
+
+    def __getattr__(self, name):
+        if name != self._testMethodName:
+            return super(_FailedTest, self).__getattr__(name)
+        def testFailure():
+            raise self._exception
+        return testFailure
+
+
+def _make_failed_import_test(name, suiteClass):
+    message = 'Failed to import test module: %s\n%s' % (
+        name, traceback.format_exc())
+    return _make_failed_test(name, ImportError(message), suiteClass, message)
+
+def _make_failed_load_tests(name, exception, suiteClass):
+    message = 'Failed to call load_tests:\n%s' % (traceback.format_exc(),)
+    return _make_failed_test(
+        name, exception, suiteClass, message)
+
+def _make_failed_test(methodname, exception, suiteClass, message):
+    test = _FailedTest(methodname, exception)
+    return suiteClass((test,)), message
+
+def _make_skipped_test(methodname, exception, suiteClass):
+    @case.skip(str(exception))
+    def testSkipped(self):
+        pass
+    attrs = {methodname: testSkipped}
+    TestClass = type("ModuleSkipped", (case.TestCase,), attrs)
+    return suiteClass((TestClass(methodname),))
+
+def _splitext(path):
+    return os.path.splitext(path)[0]
+
+
+class TestLoader(object):
+    """
+    This class is responsible for loading tests according to various criteria
+    and returning them wrapped in a TestSuite
+    """
+    testMethodPrefix = 'test'
+    sortTestMethodsUsing = staticmethod(util.three_way_cmp)
+    testNamePatterns = None
+    suiteClass = suite.TestSuite
+    _top_level_dir = None
+
+    def __init__(self):
+        super(TestLoader, self).__init__()
+        self.errors = []
+        # Tracks packages which we have called into via load_tests, to
+        # avoid infinite re-entrancy.
+        self._loading_packages = set()
+
+    def loadTestsFromTestCase(self, testCaseClass):
+        """Return a suite of all test cases contained in testCaseClass"""
+        if issubclass(testCaseClass, suite.TestSuite):
+            raise TypeError("Test cases should not be derived from "
+                            "TestSuite. Maybe you meant to derive from "
+                            "TestCase?")
+        if testCaseClass in (case.TestCase, case.FunctionTestCase):
+            # We don't load any tests from base types that should not be loaded.
+            testCaseNames = []
+        else:
+            testCaseNames = self.getTestCaseNames(testCaseClass)
+            if not testCaseNames and hasattr(testCaseClass, 'runTest'):
+                testCaseNames = ['runTest']
+        loaded_suite = self.suiteClass(map(testCaseClass, testCaseNames))
+        return loaded_suite
+
+    def loadTestsFromModule(self, module, *, pattern=None):
+        """Return a suite of all test cases contained in the given module"""
+        tests = []
+        for name in dir(module):
+            obj = getattr(module, name)
+            if (
+                isinstance(obj, type)
+                and issubclass(obj, case.TestCase)
+                and obj not in (case.TestCase, case.FunctionTestCase)
+            ):
+                tests.append(self.loadTestsFromTestCase(obj))
+
+        load_tests = getattr(module, 'load_tests', None)
+        tests = self.suiteClass(tests)
+        if load_tests is not None:
+            try:
+                return load_tests(self, tests, pattern)
+            except Exception as e:
+                error_case, error_message = _make_failed_load_tests(
+                    module.__name__, e, self.suiteClass)
+                self.errors.append(error_message)
+                return error_case
+        return tests
+
+    def loadTestsFromName(self, name, module=None):
+        """Return a suite of all test cases given a string specifier.
+
+        The name may resolve either to a module, a test case class, a
+        test method within a test case class, or a callable object which
+        returns a TestCase or TestSuite instance.
+
+        The method optionally resolves the names relative to a given module.
+        """
+        parts = name.split('.')
+        error_case, error_message = None, None
+        if module is None:
+            parts_copy = parts[:]
+            while parts_copy:
+                try:
+                    module_name = '.'.join(parts_copy)
+                    module = __import__(module_name)
+                    break
+                except ImportError:
+                    next_attribute = parts_copy.pop()
+                    # Last error so we can give it to the user if needed.
+                    error_case, error_message = _make_failed_import_test(
+                        next_attribute, self.suiteClass)
+                    if not parts_copy:
+                        # Even the top level import failed: report that error.
+                        self.errors.append(error_message)
+                        return error_case
+            parts = parts[1:]
+        obj = module
+        for part in parts:
+            try:
+                parent, obj = obj, getattr(obj, part)
+            except AttributeError as e:
+                # We can't traverse some part of the name.
+                if (getattr(obj, '__path__', None) is not None
+                    and error_case is not None):
+                    # This is a package (no __path__ per importlib docs), and we
+                    # encountered an error importing something. We cannot tell
+                    # the difference between package.WrongNameTestClass and
+                    # package.wrong_module_name so we just report the
+                    # ImportError - it is more informative.
+                    self.errors.append(error_message)
+                    return error_case
+                else:
+                    # Otherwise, we signal that an AttributeError has occurred.
+                    error_case, error_message = _make_failed_test(
+                        part, e, self.suiteClass,
+                        'Failed to access attribute:\n%s' % (
+                            traceback.format_exc(),))
+                    self.errors.append(error_message)
+                    return error_case
+
+        if isinstance(obj, types.ModuleType):
+            return self.loadTestsFromModule(obj)
+        elif (
+            isinstance(obj, type)
+            and issubclass(obj, case.TestCase)
+            and obj not in (case.TestCase, case.FunctionTestCase)
+        ):
+            return self.loadTestsFromTestCase(obj)
+        elif (isinstance(obj, types.FunctionType) and
+              isinstance(parent, type) and
+              issubclass(parent, case.TestCase)):
+            name = parts[-1]
+            inst = parent(name)
+            # static methods follow a different path
+            if not isinstance(getattr(inst, name), types.FunctionType):
+                return self.suiteClass([inst])
+        elif isinstance(obj, suite.TestSuite):
+            return obj
+        if callable(obj):
+            test = obj()
+            if isinstance(test, suite.TestSuite):
+                return test
+            elif isinstance(test, case.TestCase):
+                return self.suiteClass([test])
+            else:
+                raise TypeError("calling %s returned %s, not a test" %
+                                (obj, test))
+        else:
+            raise TypeError("don't know how to make test from: %s" % obj)
+
+    def loadTestsFromNames(self, names, module=None):
+        """Return a suite of all test cases found using the given sequence
+        of string specifiers. See 'loadTestsFromName()'.
+        """
+        suites = [self.loadTestsFromName(name, module) for name in names]
+        return self.suiteClass(suites)
+
+    def getTestCaseNames(self, testCaseClass):
+        """Return a sorted sequence of method names found within testCaseClass
+        """
+        def shouldIncludeMethod(attrname):
+            if not attrname.startswith(self.testMethodPrefix):
+                return False
+            testFunc = getattr(testCaseClass, attrname)
+            if not callable(testFunc):
+                return False
+            fullName = f'%s.%s.%s' % (
+                testCaseClass.__module__, testCaseClass.__qualname__, attrname
+            )
+            return self.testNamePatterns is None or \
+                any(fnmatchcase(fullName, pattern) for pattern in self.testNamePatterns)
+        testFnNames = list(filter(shouldIncludeMethod, dir(testCaseClass)))
+        if self.sortTestMethodsUsing:
+            testFnNames.sort(key=functools.cmp_to_key(self.sortTestMethodsUsing))
+        return testFnNames
+
+    def discover(self, start_dir, pattern='test*.py', top_level_dir=None):
+        """Find and return all test modules from the specified start
+        directory, recursing into subdirectories to find them and return all
+        tests found within them. Only test files that match the pattern will
+        be loaded. (Using shell style pattern matching.)
+
+        All test modules must be importable from the top level of the project.
+        If the start directory is not the top level directory then the top
+        level directory must be specified separately.
+
+        If a test package name (directory with '__init__.py') matches the
+        pattern then the package will be checked for a 'load_tests' function. If
+        this exists then it will be called with (loader, tests, pattern) unless
+        the package has already had load_tests called from the same discovery
+        invocation, in which case the package module object is not scanned for
+        tests - this ensures that when a package uses discover to further
+        discover child tests that infinite recursion does not happen.
+
+        If load_tests exists then discovery does *not* recurse into the package,
+        load_tests is responsible for loading all tests in the package.
+
+        The pattern is deliberately not stored as a loader attribute so that
+        packages can continue discovery themselves. top_level_dir is stored so
+        load_tests does not need to pass this argument in to loader.discover().
+
+        Paths are sorted before being imported to ensure reproducible execution
+        order even on filesystems with non-alphabetical ordering like ext3/4.
+        """
+        original_top_level_dir = self._top_level_dir
+        set_implicit_top = False
+        if top_level_dir is None and self._top_level_dir is not None:
+            # make top_level_dir optional if called from load_tests in a package
+            top_level_dir = self._top_level_dir
+        elif top_level_dir is None:
+            set_implicit_top = True
+            top_level_dir = start_dir
+
+        top_level_dir = os.path.abspath(top_level_dir)
+
+        if not top_level_dir in sys.path:
+            # all test modules must be importable from the top level directory
+            # should we *unconditionally* put the start directory in first
+            # in sys.path to minimise likelihood of conflicts between installed
+            # modules and development versions?
+            sys.path.insert(0, top_level_dir)
+        self._top_level_dir = top_level_dir
+
+        is_not_importable = False
+        is_namespace = False
+        tests = []
+        if os.path.isdir(os.path.abspath(start_dir)):
+            start_dir = os.path.abspath(start_dir)
+            if start_dir != top_level_dir:
+                is_not_importable = not os.path.isfile(os.path.join(start_dir, '__init__.py'))
+        else:
+            # support for discovery from dotted module names
+            try:
+                __import__(start_dir)
+            except ImportError:
+                is_not_importable = True
+            else:
+                the_module = sys.modules[start_dir]
+                if not hasattr(the_module, "__file__") or the_module.__file__ is None:
+                    # look for namespace packages
+                    try:
+                        spec = the_module.__spec__
+                    except AttributeError:
+                        spec = None
+
+                    if spec and spec.submodule_search_locations is not None:
+                        is_namespace = True
+
+                        for path in the_module.__path__:
+                            if (not set_implicit_top and
+                                not path.startswith(top_level_dir)):
+                                continue
+                            self._top_level_dir = \
+                                (path.split(the_module.__name__
+                                        .replace(".", os.path.sep))[0])
+                            tests.extend(self._find_tests(path, pattern, namespace=True))
+                    elif the_module.__name__ in sys.builtin_module_names:
+                        # builtin module
+                        raise TypeError('Can not use builtin modules '
+                                        'as dotted module names') from None
+                    else:
+                        raise TypeError(
+                            f"don't know how to discover from {the_module!r}"
+                            ) from None
+
+                else:
+                    top_part = start_dir.split('.')[0]
+                    start_dir = os.path.abspath(os.path.dirname((the_module.__file__)))
+
+                if set_implicit_top:
+                    if not is_namespace:
+                        if sys.modules[top_part].__file__ is None:
+                            self._top_level_dir = os.path.dirname(the_module.__file__)
+                            if self._top_level_dir not in sys.path:
+                                sys.path.insert(0, self._top_level_dir)
+                        else:
+                            self._top_level_dir = \
+                                self._get_directory_containing_module(top_part)
+                    sys.path.remove(top_level_dir)
+
+        if is_not_importable:
+            raise ImportError('Start directory is not importable: %r' % start_dir)
+
+        if not is_namespace:
+            tests = list(self._find_tests(start_dir, pattern))
+
+        self._top_level_dir = original_top_level_dir
+        return self.suiteClass(tests)
+
+    def _get_directory_containing_module(self, module_name):
+        module = sys.modules[module_name]
+        full_path = os.path.abspath(module.__file__)
+
+        if os.path.basename(full_path).lower().startswith('__init__.py'):
+            return os.path.dirname(os.path.dirname(full_path))
+        else:
+            # here we have been given a module rather than a package - so
+            # all we can do is search the *same* directory the module is in
+            # should an exception be raised instead
+            return os.path.dirname(full_path)
+
+    def _get_name_from_path(self, path):
+        if path == self._top_level_dir:
+            return '.'
+        path = _splitext(os.path.normpath(path))
+
+        _relpath = os.path.relpath(path, self._top_level_dir)
+        assert not os.path.isabs(_relpath), "Path must be within the project"
+        assert not _relpath.startswith('..'), "Path must be within the project"
+
+        name = _relpath.replace(os.path.sep, '.')
+        return name
+
+    def _get_module_from_name(self, name):
+        __import__(name)
+        return sys.modules[name]
+
+    def _match_path(self, path, full_path, pattern):
+        # override this method to use alternative matching strategy
+        return fnmatch(path, pattern)
+
+    def _find_tests(self, start_dir, pattern, namespace=False):
+        """Used by discovery. Yields test suites it loads."""
+        # Handle the __init__ in this package
+        name = self._get_name_from_path(start_dir)
+        # name is '.' when start_dir == top_level_dir (and top_level_dir is by
+        # definition not a package).
+        if name != '.' and name not in self._loading_packages:
+            # name is in self._loading_packages while we have called into
+            # loadTestsFromModule with name.
+            tests, should_recurse = self._find_test_path(
+                start_dir, pattern, namespace)
+            if tests is not None:
+                yield tests
+            if not should_recurse:
+                # Either an error occurred, or load_tests was used by the
+                # package.
+                return
+        # Handle the contents.
+        paths = sorted(os.listdir(start_dir))
+        for path in paths:
+            full_path = os.path.join(start_dir, path)
+            tests, should_recurse = self._find_test_path(
+                full_path, pattern, False)
+            if tests is not None:
+                yield tests
+            if should_recurse:
+                # we found a package that didn't use load_tests.
+                name = self._get_name_from_path(full_path)
+                self._loading_packages.add(name)
+                try:
+                    yield from self._find_tests(full_path, pattern, False)
+                finally:
+                    self._loading_packages.discard(name)
+
+    def _find_test_path(self, full_path, pattern, namespace=False):
+        """Used by discovery.
+
+        Loads tests from a single file, or a directories' __init__.py when
+        passed the directory.
+
+        Returns a tuple (None_or_tests_from_file, should_recurse).
+        """
+        basename = os.path.basename(full_path)
+        if os.path.isfile(full_path):
+            if not VALID_MODULE_NAME.match(basename):
+                # valid Python identifiers only
+                return None, False
+            if not self._match_path(basename, full_path, pattern):
+                return None, False
+            # if the test file matches, load it
+            name = self._get_name_from_path(full_path)
+            try:
+                module = self._get_module_from_name(name)
+            except case.SkipTest as e:
+                return _make_skipped_test(name, e, self.suiteClass), False
+            except:
+                error_case, error_message = \
+                    _make_failed_import_test(name, self.suiteClass)
+                self.errors.append(error_message)
+                return error_case, False
+            else:
+                mod_file = os.path.abspath(
+                    getattr(module, '__file__', full_path))
+                realpath = _splitext(
+                    os.path.realpath(mod_file))
+                fullpath_noext = _splitext(
+                    os.path.realpath(full_path))
+                if realpath.lower() != fullpath_noext.lower():
+                    module_dir = os.path.dirname(realpath)
+                    mod_name = _splitext(
+                        os.path.basename(full_path))
+                    expected_dir = os.path.dirname(full_path)
+                    msg = ("%r module incorrectly imported from %r. Expected "
+                           "%r. Is this module globally installed?")
+                    raise ImportError(
+                        msg % (mod_name, module_dir, expected_dir))
+                return self.loadTestsFromModule(module, pattern=pattern), False
+        elif os.path.isdir(full_path):
+            if (not namespace and
+                not os.path.isfile(os.path.join(full_path, '__init__.py'))):
+                return None, False
+
+            load_tests = None
+            tests = None
+            name = self._get_name_from_path(full_path)
+            try:
+                package = self._get_module_from_name(name)
+            except case.SkipTest as e:
+                return _make_skipped_test(name, e, self.suiteClass), False
+            except:
+                error_case, error_message = \
+                    _make_failed_import_test(name, self.suiteClass)
+                self.errors.append(error_message)
+                return error_case, False
+            else:
+                load_tests = getattr(package, 'load_tests', None)
+                # Mark this package as being in load_tests (possibly ;))
+                self._loading_packages.add(name)
+                try:
+                    tests = self.loadTestsFromModule(package, pattern=pattern)
+                    if load_tests is not None:
+                        # loadTestsFromModule(package) has loaded tests for us.
+                        return tests, False
+                    return tests, True
+                finally:
+                    self._loading_packages.discard(name)
+        else:
+            return None, False
+
+
+defaultTestLoader = TestLoader()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/main.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/main.py
new file mode 100644
index 0000000000000000000000000000000000000000..be99d93c78cca6c614691f783fa8a6fcfaf1abee
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/main.py
@@ -0,0 +1,280 @@
+"""Unittest main program"""
+
+import sys
+import argparse
+import os
+
+from . import loader, runner
+from .signals import installHandler
+
+__unittest = True
+_NO_TESTS_EXITCODE = 5
+
+MAIN_EXAMPLES = """\
+Examples:
+  %(prog)s test_module               - run tests from test_module
+  %(prog)s module.TestClass          - run tests from module.TestClass
+  %(prog)s module.Class.test_method  - run specified test method
+  %(prog)s path/to/test_file.py      - run tests from test_file.py
+"""
+
+MODULE_EXAMPLES = """\
+Examples:
+  %(prog)s                           - run default set of tests
+  %(prog)s MyTestSuite               - run suite 'MyTestSuite'
+  %(prog)s MyTestCase.testSomething  - run MyTestCase.testSomething
+  %(prog)s MyTestCase                - run all 'test*' test methods
+                                       in MyTestCase
+"""
+
+def _convert_name(name):
+    # on Linux / Mac OS X 'foo.PY' is not importable, but on
+    # Windows it is. Simpler to do a case insensitive match
+    # a better check would be to check that the name is a
+    # valid Python module name.
+    if os.path.isfile(name) and name.lower().endswith('.py'):
+        if os.path.isabs(name):
+            rel_path = os.path.relpath(name, os.getcwd())
+            if os.path.isabs(rel_path) or rel_path.startswith(os.pardir):
+                return name
+            name = rel_path
+        # on Windows both '\' and '/' are used as path
+        # separators. Better to replace both than rely on os.path.sep
+        return os.path.normpath(name)[:-3].replace('\\', '.').replace('/', '.')
+    return name
+
+def _convert_names(names):
+    return [_convert_name(name) for name in names]
+
+
+def _convert_select_pattern(pattern):
+    if not '*' in pattern:
+        pattern = '*%s*' % pattern
+    return pattern
+
+
+class TestProgram(object):
+    """A command-line program that runs a set of tests; this is primarily
+       for making test modules conveniently executable.
+    """
+    # defaults for testing
+    module=None
+    verbosity = 1
+    failfast = catchbreak = buffer = progName = warnings = testNamePatterns = None
+    _discovery_parser = None
+
+    def __init__(self, module='__main__', defaultTest=None, argv=None,
+                    testRunner=None, testLoader=loader.defaultTestLoader,
+                    exit=True, verbosity=1, failfast=None, catchbreak=None,
+                    buffer=None, warnings=None, *, tb_locals=False,
+                    durations=None):
+        if isinstance(module, str):
+            self.module = __import__(module)
+            for part in module.split('.')[1:]:
+                self.module = getattr(self.module, part)
+        else:
+            self.module = module
+        if argv is None:
+            argv = sys.argv
+
+        self.exit = exit
+        self.failfast = failfast
+        self.catchbreak = catchbreak
+        self.verbosity = verbosity
+        self.buffer = buffer
+        self.tb_locals = tb_locals
+        self.durations = durations
+        if warnings is None and not sys.warnoptions:
+            # even if DeprecationWarnings are ignored by default
+            # print them anyway unless other warnings settings are
+            # specified by the warnings arg or the -W python flag
+            self.warnings = 'default'
+        else:
+            # here self.warnings is set either to the value passed
+            # to the warnings args or to None.
+            # If the user didn't pass a value self.warnings will
+            # be None. This means that the behavior is unchanged
+            # and depends on the values passed to -W.
+            self.warnings = warnings
+        self.defaultTest = defaultTest
+        self.testRunner = testRunner
+        self.testLoader = testLoader
+        self.progName = os.path.basename(argv[0])
+        self.parseArgs(argv)
+        self.runTests()
+
+    def _print_help(self, *args, **kwargs):
+        if self.module is None:
+            print(self._main_parser.format_help())
+            print(MAIN_EXAMPLES % {'prog': self.progName})
+            self._discovery_parser.print_help()
+        else:
+            print(self._main_parser.format_help())
+            print(MODULE_EXAMPLES % {'prog': self.progName})
+
+    def parseArgs(self, argv):
+        self._initArgParsers()
+        if self.module is None:
+            if len(argv) > 1 and argv[1].lower() == 'discover':
+                self._do_discovery(argv[2:])
+                return
+            self._main_parser.parse_args(argv[1:], self)
+            if not self.tests:
+                # this allows "python -m unittest -v" to still work for
+                # test discovery.
+                self._do_discovery([])
+                return
+        else:
+            self._main_parser.parse_args(argv[1:], self)
+
+        if self.tests:
+            self.testNames = _convert_names(self.tests)
+            if __name__ == '__main__':
+                # to support python -m unittest ...
+                self.module = None
+        elif self.defaultTest is None:
+            # createTests will load tests from self.module
+            self.testNames = None
+        elif isinstance(self.defaultTest, str):
+            self.testNames = (self.defaultTest,)
+        else:
+            self.testNames = list(self.defaultTest)
+        self.createTests()
+
+    def createTests(self, from_discovery=False, Loader=None):
+        if self.testNamePatterns:
+            self.testLoader.testNamePatterns = self.testNamePatterns
+        if from_discovery:
+            loader = self.testLoader if Loader is None else Loader()
+            self.test = loader.discover(self.start, self.pattern, self.top)
+        elif self.testNames is None:
+            self.test = self.testLoader.loadTestsFromModule(self.module)
+        else:
+            self.test = self.testLoader.loadTestsFromNames(self.testNames,
+                                                           self.module)
+
+    def _initArgParsers(self):
+        parent_parser = self._getParentArgParser()
+        self._main_parser = self._getMainArgParser(parent_parser)
+        self._discovery_parser = self._getDiscoveryArgParser(parent_parser)
+
+    def _getParentArgParser(self):
+        parser = argparse.ArgumentParser(add_help=False)
+
+        parser.add_argument('-v', '--verbose', dest='verbosity',
+                            action='store_const', const=2,
+                            help='Verbose output')
+        parser.add_argument('-q', '--quiet', dest='verbosity',
+                            action='store_const', const=0,
+                            help='Quiet output')
+        parser.add_argument('--locals', dest='tb_locals',
+                            action='store_true',
+                            help='Show local variables in tracebacks')
+        parser.add_argument('--durations', dest='durations', type=int,
+                            default=None, metavar="N",
+                            help='Show the N slowest test cases (N=0 for all)')
+        if self.failfast is None:
+            parser.add_argument('-f', '--failfast', dest='failfast',
+                                action='store_true',
+                                help='Stop on first fail or error')
+            self.failfast = False
+        if self.catchbreak is None:
+            parser.add_argument('-c', '--catch', dest='catchbreak',
+                                action='store_true',
+                                help='Catch Ctrl-C and display results so far')
+            self.catchbreak = False
+        if self.buffer is None:
+            parser.add_argument('-b', '--buffer', dest='buffer',
+                                action='store_true',
+                                help='Buffer stdout and stderr during tests')
+            self.buffer = False
+        if self.testNamePatterns is None:
+            parser.add_argument('-k', dest='testNamePatterns',
+                                action='append', type=_convert_select_pattern,
+                                help='Only run tests which match the given substring')
+            self.testNamePatterns = []
+
+        return parser
+
+    def _getMainArgParser(self, parent):
+        parser = argparse.ArgumentParser(parents=[parent], color=True)
+        parser.prog = self.progName
+        parser.print_help = self._print_help
+
+        parser.add_argument('tests', nargs='*',
+                            help='a list of any number of test modules, '
+                            'classes and test methods.')
+
+        return parser
+
+    def _getDiscoveryArgParser(self, parent):
+        parser = argparse.ArgumentParser(parents=[parent], color=True)
+        parser.prog = '%s discover' % self.progName
+        parser.epilog = ('For test discovery all test modules must be '
+                         'importable from the top level directory of the '
+                         'project.')
+
+        parser.add_argument('-s', '--start-directory', dest='start',
+                            help="Directory to start discovery ('.' default)")
+        parser.add_argument('-p', '--pattern', dest='pattern',
+                            help="Pattern to match tests ('test*.py' default)")
+        parser.add_argument('-t', '--top-level-directory', dest='top',
+                            help='Top level directory of project (defaults to '
+                                 'start directory)')
+        for arg in ('start', 'pattern', 'top'):
+            parser.add_argument(arg, nargs='?',
+                                default=argparse.SUPPRESS,
+                                help=argparse.SUPPRESS)
+
+        return parser
+
+    def _do_discovery(self, argv, Loader=None):
+        self.start = '.'
+        self.pattern = 'test*.py'
+        self.top = None
+        if argv is not None:
+            # handle command line args for test discovery
+            if self._discovery_parser is None:
+                # for testing
+                self._initArgParsers()
+            self._discovery_parser.parse_args(argv, self)
+
+        self.createTests(from_discovery=True, Loader=Loader)
+
+    def runTests(self):
+        if self.catchbreak:
+            installHandler()
+        if self.testRunner is None:
+            self.testRunner = runner.TextTestRunner
+        if isinstance(self.testRunner, type):
+            try:
+                try:
+                    testRunner = self.testRunner(verbosity=self.verbosity,
+                                                 failfast=self.failfast,
+                                                 buffer=self.buffer,
+                                                 warnings=self.warnings,
+                                                 tb_locals=self.tb_locals,
+                                                 durations=self.durations)
+                except TypeError:
+                    # didn't accept the tb_locals or durations argument
+                    testRunner = self.testRunner(verbosity=self.verbosity,
+                                                 failfast=self.failfast,
+                                                 buffer=self.buffer,
+                                                 warnings=self.warnings)
+            except TypeError:
+                # didn't accept the verbosity, buffer or failfast arguments
+                testRunner = self.testRunner()
+        else:
+            # it is assumed to be a TestRunner instance
+            testRunner = self.testRunner
+        self.result = testRunner.run(self.test)
+        if self.exit:
+            if not self.result.wasSuccessful():
+                sys.exit(1)
+            elif self.result.testsRun == 0 and len(self.result.skipped) == 0:
+                sys.exit(_NO_TESTS_EXITCODE)
+            else:
+                sys.exit(0)
+
+
+main = TestProgram
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/mock.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/mock.py
new file mode 100644
index 0000000000000000000000000000000000000000..92b81d1584142eb4d6996b4b8e75875f5829874d
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/mock.py
@@ -0,0 +1,3204 @@
+# mock.py
+# Test tools for mocking and patching.
+# Maintained by Michael Foord
+# Backport for other versions of Python available from
+# https://pypi.org/project/mock
+
+__all__ = (
+    'Mock',
+    'MagicMock',
+    'patch',
+    'sentinel',
+    'DEFAULT',
+    'ANY',
+    'call',
+    'create_autospec',
+    'AsyncMock',
+    'ThreadingMock',
+    'FILTER_DIR',
+    'NonCallableMock',
+    'NonCallableMagicMock',
+    'mock_open',
+    'PropertyMock',
+    'seal',
+)
+
+
+import asyncio
+import contextlib
+import io
+import inspect
+import pprint
+import sys
+import builtins
+import pkgutil
+from inspect import iscoroutinefunction
+import threading
+from annotationlib import Format
+from dataclasses import fields, is_dataclass
+from types import CodeType, ModuleType, MethodType
+from unittest.util import safe_repr
+from functools import wraps, partial
+from threading import RLock
+
+
+class InvalidSpecError(Exception):
+    """Indicates that an invalid value was used as a mock spec."""
+
+
+_builtins = {name for name in dir(builtins) if not name.startswith('_')}
+
+FILTER_DIR = True
+
+# Workaround for issue #12370
+# Without this, the __class__ properties wouldn't be set correctly
+_safe_super = super
+
+def _is_async_obj(obj):
+    if _is_instance_mock(obj) and not isinstance(obj, AsyncMock):
+        return False
+    if hasattr(obj, '__func__'):
+        obj = getattr(obj, '__func__')
+    return iscoroutinefunction(obj) or inspect.isawaitable(obj)
+
+
+def _is_async_func(func):
+    if getattr(func, '__code__', None):
+        return iscoroutinefunction(func)
+    else:
+        return False
+
+
+def _is_instance_mock(obj):
+    # can't use isinstance on Mock objects because they override __class__
+    # The base class for all mocks is NonCallableMock
+    return issubclass(type(obj), NonCallableMock)
+
+
+def _is_exception(obj):
+    return (
+        isinstance(obj, BaseException) or
+        isinstance(obj, type) and issubclass(obj, BaseException)
+    )
+
+
+def _extract_mock(obj):
+    # Autospecced functions will return a FunctionType with "mock" attribute
+    # which is the actual mock object that needs to be used.
+    if isinstance(obj, FunctionTypes) and hasattr(obj, 'mock'):
+        return obj.mock
+    else:
+        return obj
+
+
+def _get_signature_object(func, as_instance, eat_self):
+    """
+    Given an arbitrary, possibly callable object, try to create a suitable
+    signature object.
+    Return a (reduced func, signature) tuple, or None.
+    """
+    if isinstance(func, type) and not as_instance:
+        # If it's a type and should be modelled as a type, use __init__.
+        func = func.__init__
+        # Skip the `self` argument in __init__
+        eat_self = True
+    elif isinstance(func, (classmethod, staticmethod)):
+        if isinstance(func, classmethod):
+            # Skip the `cls` argument of a class method
+            eat_self = True
+        # Use the original decorated method to extract the correct function signature
+        func = func.__func__
+    elif not isinstance(func, FunctionTypes):
+        # If we really want to model an instance of the passed type,
+        # __call__ should be looked up, not __init__.
+        try:
+            func = func.__call__
+        except AttributeError:
+            return None
+    if eat_self:
+        sig_func = partial(func, None)
+    else:
+        sig_func = func
+    try:
+        return func, inspect.signature(sig_func, annotation_format=Format.FORWARDREF)
+    except ValueError:
+        # Certain callable types are not supported by inspect.signature()
+        return None
+
+
+def _check_signature(func, mock, skipfirst, instance=False):
+    sig = _get_signature_object(func, instance, skipfirst)
+    if sig is None:
+        return
+    func, sig = sig
+    def checksig(self, /, *args, **kwargs):
+        sig.bind(*args, **kwargs)
+    _copy_func_details(func, checksig)
+    type(mock)._mock_check_sig = checksig
+    type(mock).__signature__ = sig
+
+
+def _copy_func_details(func, funcopy):
+    # we explicitly don't copy func.__dict__ into this copy as it would
+    # expose original attributes that should be mocked
+    for attribute in (
+        '__name__', '__doc__', '__text_signature__',
+        '__module__', '__defaults__', '__kwdefaults__',
+    ):
+        try:
+            setattr(funcopy, attribute, getattr(func, attribute))
+        except AttributeError:
+            pass
+
+
+def _callable(obj):
+    if isinstance(obj, type):
+        return True
+    if isinstance(obj, (staticmethod, classmethod, MethodType)):
+        return _callable(obj.__func__)
+    if getattr(obj, '__call__', None) is not None:
+        return True
+    return False
+
+
+def _is_list(obj):
+    # checks for list or tuples
+    # XXXX badly named!
+    return type(obj) in (list, tuple)
+
+
+def _instance_callable(obj):
+    """Given an object, return True if the object is callable.
+    For classes, return True if instances would be callable."""
+    if not isinstance(obj, type):
+        # already an instance
+        return getattr(obj, '__call__', None) is not None
+
+    # *could* be broken by a class overriding __mro__ or __dict__ via
+    # a metaclass
+    for base in (obj,) + obj.__mro__:
+        if base.__dict__.get('__call__') is not None:
+            return True
+    return False
+
+
+def _set_signature(mock, original, instance=False):
+    # creates a function with signature (*args, **kwargs) that delegates to a
+    # mock. It still does signature checking by calling a lambda with the same
+    # signature as the original.
+
+    skipfirst = isinstance(original, type)
+    result = _get_signature_object(original, instance, skipfirst)
+    if result is None:
+        return mock
+    func, sig = result
+    def checksig(*args, **kwargs):
+        sig.bind(*args, **kwargs)
+    _copy_func_details(func, checksig)
+
+    name = original.__name__
+    if not name.isidentifier():
+        name = 'funcopy'
+    context = {'_checksig_': checksig, 'mock': mock}
+    src = """def %s(*args, **kwargs):
+    _checksig_(*args, **kwargs)
+    return mock(*args, **kwargs)""" % name
+    exec (src, context)
+    funcopy = context[name]
+    _setup_func(funcopy, mock, sig)
+    return funcopy
+
+def _set_async_signature(mock, original, instance=False, is_async_mock=False):
+    # creates an async function with signature (*args, **kwargs) that delegates to a
+    # mock. It still does signature checking by calling a lambda with the same
+    # signature as the original.
+
+    skipfirst = isinstance(original, type)
+    func, sig = _get_signature_object(original, instance, skipfirst)
+    def checksig(*args, **kwargs):
+        sig.bind(*args, **kwargs)
+    _copy_func_details(func, checksig)
+
+    name = original.__name__
+    context = {'_checksig_': checksig, 'mock': mock}
+    src = """async def %s(*args, **kwargs):
+    _checksig_(*args, **kwargs)
+    return await mock(*args, **kwargs)""" % name
+    exec (src, context)
+    funcopy = context[name]
+    _setup_func(funcopy, mock, sig)
+    _setup_async_mock(funcopy)
+    return funcopy
+
+
+def _setup_func(funcopy, mock, sig):
+    funcopy.mock = mock
+
+    def assert_called_with(*args, **kwargs):
+        return mock.assert_called_with(*args, **kwargs)
+    def assert_called(*args, **kwargs):
+        return mock.assert_called(*args, **kwargs)
+    def assert_not_called(*args, **kwargs):
+        return mock.assert_not_called(*args, **kwargs)
+    def assert_called_once(*args, **kwargs):
+        return mock.assert_called_once(*args, **kwargs)
+    def assert_called_once_with(*args, **kwargs):
+        return mock.assert_called_once_with(*args, **kwargs)
+    def assert_has_calls(*args, **kwargs):
+        return mock.assert_has_calls(*args, **kwargs)
+    def assert_any_call(*args, **kwargs):
+        return mock.assert_any_call(*args, **kwargs)
+    def reset_mock():
+        funcopy.method_calls = _CallList()
+        funcopy.mock_calls = _CallList()
+        mock.reset_mock()
+        ret = funcopy.return_value
+        if _is_instance_mock(ret) and not ret is mock:
+            ret.reset_mock()
+
+    funcopy.called = False
+    funcopy.call_count = 0
+    funcopy.call_args = None
+    funcopy.call_args_list = _CallList()
+    funcopy.method_calls = _CallList()
+    funcopy.mock_calls = _CallList()
+
+    funcopy.return_value = mock.return_value
+    funcopy.side_effect = mock.side_effect
+    funcopy._mock_children = mock._mock_children
+
+    funcopy.assert_called_with = assert_called_with
+    funcopy.assert_called_once_with = assert_called_once_with
+    funcopy.assert_has_calls = assert_has_calls
+    funcopy.assert_any_call = assert_any_call
+    funcopy.reset_mock = reset_mock
+    funcopy.assert_called = assert_called
+    funcopy.assert_not_called = assert_not_called
+    funcopy.assert_called_once = assert_called_once
+    funcopy.__signature__ = sig
+
+    mock._mock_delegate = funcopy
+
+
+def _setup_async_mock(mock):
+    mock._is_coroutine = asyncio.coroutines._is_coroutine
+    mock.await_count = 0
+    mock.await_args = None
+    mock.await_args_list = _CallList()
+
+    # Mock is not configured yet so the attributes are set
+    # to a function and then the corresponding mock helper function
+    # is called when the helper is accessed similar to _setup_func.
+    def wrapper(attr, /, *args, **kwargs):
+        return getattr(mock.mock, attr)(*args, **kwargs)
+
+    for attribute in ('assert_awaited',
+                      'assert_awaited_once',
+                      'assert_awaited_with',
+                      'assert_awaited_once_with',
+                      'assert_any_await',
+                      'assert_has_awaits',
+                      'assert_not_awaited'):
+
+        # setattr(mock, attribute, wrapper) causes late binding
+        # hence attribute will always be the last value in the loop
+        # Use partial(wrapper, attribute) to ensure the attribute is bound
+        # correctly.
+        setattr(mock, attribute, partial(wrapper, attribute))
+
+
+def _is_magic(name):
+    return '__%s__' % name[2:-2] == name
+
+
+class _SentinelObject(object):
+    "A unique, named, sentinel object."
+    def __init__(self, name):
+        self.name = name
+
+    def __repr__(self):
+        return 'sentinel.%s' % self.name
+
+    def __reduce__(self):
+        return 'sentinel.%s' % self.name
+
+
+class _Sentinel(object):
+    """Access attributes to return a named object, usable as a sentinel."""
+    def __init__(self):
+        self._sentinels = {}
+
+    def __getattr__(self, name):
+        if name == '__bases__':
+            # Without this help(unittest.mock) raises an exception
+            raise AttributeError
+        return self._sentinels.setdefault(name, _SentinelObject(name))
+
+    def __reduce__(self):
+        return 'sentinel'
+
+
+sentinel = _Sentinel()
+
+DEFAULT = sentinel.DEFAULT
+_missing = sentinel.MISSING
+_deleted = sentinel.DELETED
+
+
+_allowed_names = {
+    'return_value', '_mock_return_value', 'side_effect',
+    '_mock_side_effect', '_mock_parent', '_mock_new_parent',
+    '_mock_name', '_mock_new_name'
+}
+
+
+def _delegating_property(name):
+    _allowed_names.add(name)
+    _the_name = '_mock_' + name
+    def _get(self, name=name, _the_name=_the_name):
+        sig = self._mock_delegate
+        if sig is None:
+            return getattr(self, _the_name)
+        return getattr(sig, name)
+    def _set(self, value, name=name, _the_name=_the_name):
+        sig = self._mock_delegate
+        if sig is None:
+            self.__dict__[_the_name] = value
+        else:
+            setattr(sig, name, value)
+
+    return property(_get, _set)
+
+
+
+class _CallList(list):
+
+    def __contains__(self, value):
+        if not isinstance(value, list):
+            return list.__contains__(self, value)
+        len_value = len(value)
+        len_self = len(self)
+        if len_value > len_self:
+            return False
+
+        for i in range(0, len_self - len_value + 1):
+            sub_list = self[i:i+len_value]
+            if sub_list == value:
+                return True
+        return False
+
+    def __repr__(self):
+        return pprint.pformat(list(self))
+
+
+def _check_and_set_parent(parent, value, name, new_name):
+    value = _extract_mock(value)
+
+    if not _is_instance_mock(value):
+        return False
+    if ((value._mock_name or value._mock_new_name) or
+        (value._mock_parent is not None) or
+        (value._mock_new_parent is not None)):
+        return False
+
+    _parent = parent
+    while _parent is not None:
+        # setting a mock (value) as a child or return value of itself
+        # should not modify the mock
+        if _parent is value:
+            return False
+        _parent = _parent._mock_new_parent
+
+    if new_name:
+        value._mock_new_parent = parent
+        value._mock_new_name = new_name
+    if name:
+        value._mock_parent = parent
+        value._mock_name = name
+    return True
+
+# Internal class to identify if we wrapped an iterator object or not.
+class _MockIter(object):
+    def __init__(self, obj):
+        self.obj = iter(obj)
+    def __next__(self):
+        return next(self.obj)
+
+class Base(object):
+    _mock_return_value = DEFAULT
+    _mock_side_effect = None
+    def __init__(self, /, *args, **kwargs):
+        pass
+
+
+
+class NonCallableMock(Base):
+    """A non-callable version of `Mock`"""
+
+    # Store a mutex as a class attribute in order to protect concurrent access
+    # to mock attributes. Using a class attribute allows all NonCallableMock
+    # instances to share the mutex for simplicity.
+    #
+    # See https://github.com/python/cpython/issues/98624 for why this is
+    # necessary.
+    _lock = RLock()
+
+    def __new__(
+            cls, spec=None, wraps=None, name=None, spec_set=None,
+            parent=None, _spec_state=None, _new_name='', _new_parent=None,
+            _spec_as_instance=False, _eat_self=None, unsafe=False, **kwargs
+        ):
+        # every instance has its own class
+        # so we can create magic methods on the
+        # class without stomping on other mocks
+        bases = (cls,)
+        if not issubclass(cls, AsyncMockMixin):
+            # Check if spec is an async object or function
+            spec_arg = spec_set or spec
+            if spec_arg is not None and _is_async_obj(spec_arg):
+                bases = (AsyncMockMixin, cls)
+        new = type(cls.__name__, bases, {'__doc__': cls.__doc__})
+        instance = _safe_super(NonCallableMock, cls).__new__(new)
+        return instance
+
+
+    def __init__(
+            self, spec=None, wraps=None, name=None, spec_set=None,
+            parent=None, _spec_state=None, _new_name='', _new_parent=None,
+            _spec_as_instance=False, _eat_self=None, unsafe=False, **kwargs
+        ):
+        if _new_parent is None:
+            _new_parent = parent
+
+        __dict__ = self.__dict__
+        __dict__['_mock_parent'] = parent
+        __dict__['_mock_name'] = name
+        __dict__['_mock_new_name'] = _new_name
+        __dict__['_mock_new_parent'] = _new_parent
+        __dict__['_mock_sealed'] = False
+
+        if spec_set is not None:
+            spec = spec_set
+            spec_set = True
+        if _eat_self is None:
+            _eat_self = parent is not None
+
+        self._mock_add_spec(spec, spec_set, _spec_as_instance, _eat_self)
+
+        __dict__['_mock_children'] = {}
+        __dict__['_mock_wraps'] = wraps
+        __dict__['_mock_delegate'] = None
+
+        __dict__['_mock_called'] = False
+        __dict__['_mock_call_args'] = None
+        __dict__['_mock_call_count'] = 0
+        __dict__['_mock_call_args_list'] = _CallList()
+        __dict__['_mock_mock_calls'] = _CallList()
+
+        __dict__['method_calls'] = _CallList()
+        __dict__['_mock_unsafe'] = unsafe
+
+        if kwargs:
+            self.configure_mock(**kwargs)
+
+        _safe_super(NonCallableMock, self).__init__(
+            spec, wraps, name, spec_set, parent,
+            _spec_state
+        )
+
+
+    def attach_mock(self, mock, attribute):
+        """
+        Attach a mock as an attribute of this one, replacing its name and
+        parent. Calls to the attached mock will be recorded in the
+        `method_calls` and `mock_calls` attributes of this one."""
+        inner_mock = _extract_mock(mock)
+
+        inner_mock._mock_parent = None
+        inner_mock._mock_new_parent = None
+        inner_mock._mock_name = ''
+        inner_mock._mock_new_name = None
+
+        setattr(self, attribute, mock)
+
+
+    def mock_add_spec(self, spec, spec_set=False):
+        """Add a spec to a mock. `spec` can either be an object or a
+        list of strings. Only attributes on the `spec` can be fetched as
+        attributes from the mock.
+
+        If `spec_set` is True then only attributes on the spec can be set."""
+        self._mock_add_spec(spec, spec_set)
+
+
+    def _mock_add_spec(self, spec, spec_set, _spec_as_instance=False,
+                       _eat_self=False):
+        if _is_instance_mock(spec):
+            raise InvalidSpecError(f'Cannot spec a Mock object. [object={spec!r}]')
+
+        _spec_class = None
+        _spec_signature = None
+        _spec_asyncs = []
+
+        if spec is not None and not _is_list(spec):
+            if isinstance(spec, type):
+                _spec_class = spec
+            else:
+                _spec_class = type(spec)
+            res = _get_signature_object(spec,
+                                        _spec_as_instance, _eat_self)
+            _spec_signature = res and res[1]
+
+            spec_list = dir(spec)
+
+            for attr in spec_list:
+                static_attr = inspect.getattr_static(spec, attr, None)
+                unwrapped_attr = static_attr
+                try:
+                    unwrapped_attr = inspect.unwrap(unwrapped_attr)
+                except ValueError:
+                    pass
+                if iscoroutinefunction(unwrapped_attr):
+                    _spec_asyncs.append(attr)
+
+            spec = spec_list
+
+        __dict__ = self.__dict__
+        __dict__['_spec_class'] = _spec_class
+        __dict__['_spec_set'] = spec_set
+        __dict__['_spec_signature'] = _spec_signature
+        __dict__['_mock_methods'] = spec
+        __dict__['_spec_asyncs'] = _spec_asyncs
+
+    def _mock_extend_spec_methods(self, spec_methods):
+        methods = self.__dict__.get('_mock_methods') or []
+        methods.extend(spec_methods)
+        self.__dict__['_mock_methods'] = methods
+
+    def __get_return_value(self):
+        ret = self._mock_return_value
+        if self._mock_delegate is not None:
+            ret = self._mock_delegate.return_value
+
+        if ret is DEFAULT and self._mock_wraps is None:
+            ret = self._get_child_mock(
+                _new_parent=self, _new_name='()'
+            )
+            self.return_value = ret
+        return ret
+
+
+    def __set_return_value(self, value):
+        if self._mock_delegate is not None:
+            self._mock_delegate.return_value = value
+        else:
+            self._mock_return_value = value
+            _check_and_set_parent(self, value, None, '()')
+
+    __return_value_doc = "The value to be returned when the mock is called."
+    return_value = property(__get_return_value, __set_return_value,
+                            __return_value_doc)
+
+
+    @property
+    def __class__(self):
+        if self._spec_class is None:
+            return type(self)
+        return self._spec_class
+
+    called = _delegating_property('called')
+    call_count = _delegating_property('call_count')
+    call_args = _delegating_property('call_args')
+    call_args_list = _delegating_property('call_args_list')
+    mock_calls = _delegating_property('mock_calls')
+
+
+    def __get_side_effect(self):
+        delegated = self._mock_delegate
+        if delegated is None:
+            return self._mock_side_effect
+        sf = delegated.side_effect
+        if (sf is not None and not callable(sf)
+                and not isinstance(sf, _MockIter) and not _is_exception(sf)):
+            sf = _MockIter(sf)
+            delegated.side_effect = sf
+        return sf
+
+    def __set_side_effect(self, value):
+        value = _try_iter(value)
+        delegated = self._mock_delegate
+        if delegated is None:
+            self._mock_side_effect = value
+        else:
+            delegated.side_effect = value
+
+    side_effect = property(__get_side_effect, __set_side_effect)
+
+
+    def reset_mock(self, visited=None, *,
+                   return_value: bool = False,
+                   side_effect: bool = False):
+        "Restore the mock object to its initial state."
+        if visited is None:
+            visited = []
+        if id(self) in visited:
+            return
+        visited.append(id(self))
+
+        self.called = False
+        self.call_args = None
+        self.call_count = 0
+        self.mock_calls = _CallList()
+        self.call_args_list = _CallList()
+        self.method_calls = _CallList()
+
+        if return_value:
+            self._mock_return_value = DEFAULT
+        if side_effect:
+            self._mock_side_effect = None
+
+        for child in self._mock_children.values():
+            if isinstance(child, _SpecState) or child is _deleted:
+                continue
+            child.reset_mock(visited, return_value=return_value, side_effect=side_effect)
+
+        ret = self._mock_return_value
+        if _is_instance_mock(ret) and ret is not self:
+            ret.reset_mock(visited)
+
+
+    def configure_mock(self, /, **kwargs):
+        """Set attributes on the mock through keyword arguments.
+
+        Attributes plus return values and side effects can be set on child
+        mocks using standard dot notation and unpacking a dictionary in the
+        method call:
+
+        >>> attrs = {'method.return_value': 3, 'other.side_effect': KeyError}
+        >>> mock.configure_mock(**attrs)"""
+        for arg, val in sorted(kwargs.items(),
+                               # we sort on the number of dots so that
+                               # attributes are set before we set attributes on
+                               # attributes
+                               key=lambda entry: entry[0].count('.')):
+            args = arg.split('.')
+            final = args.pop()
+            obj = self
+            for entry in args:
+                obj = getattr(obj, entry)
+            setattr(obj, final, val)
+
+
+    def __getattr__(self, name):
+        if name in {'_mock_methods', '_mock_unsafe'}:
+            raise AttributeError(name)
+        elif self._mock_methods is not None:
+            if name not in self._mock_methods or name in _all_magics:
+                raise AttributeError("Mock object has no attribute %r" % name)
+        elif _is_magic(name):
+            raise AttributeError(name)
+        if not self._mock_unsafe and (not self._mock_methods or name not in self._mock_methods):
+            if name.startswith(('assert', 'assret', 'asert', 'aseert', 'assrt')) or name in _ATTRIB_DENY_LIST:
+                raise AttributeError(
+                    f"{name!r} is not a valid assertion. Use a spec "
+                    f"for the mock if {name!r} is meant to be an attribute.")
+
+        with NonCallableMock._lock:
+            result = self._mock_children.get(name)
+            if result is _deleted:
+                raise AttributeError(name)
+            elif result is None:
+                wraps = None
+                if self._mock_wraps is not None:
+                    # XXXX should we get the attribute without triggering code
+                    # execution?
+                    wraps = getattr(self._mock_wraps, name)
+
+                result = self._get_child_mock(
+                    parent=self, name=name, wraps=wraps, _new_name=name,
+                    _new_parent=self
+                )
+                self._mock_children[name]  = result
+
+            elif isinstance(result, _SpecState):
+                try:
+                    result = create_autospec(
+                        result.spec, result.spec_set, result.instance,
+                        result.parent, result.name
+                    )
+                except InvalidSpecError:
+                    target_name = self.__dict__['_mock_name'] or self
+                    raise InvalidSpecError(
+                        f'Cannot autospec attr {name!r} from target '
+                        f'{target_name!r} as it has already been mocked out. '
+                        f'[target={self!r}, attr={result.spec!r}]')
+                self._mock_children[name]  = result
+
+        return result
+
+
+    def _extract_mock_name(self):
+        _name_list = [self._mock_new_name]
+        _parent = self._mock_new_parent
+        last = self
+
+        dot = '.'
+        if _name_list == ['()']:
+            dot = ''
+
+        while _parent is not None:
+            last = _parent
+
+            _name_list.append(_parent._mock_new_name + dot)
+            dot = '.'
+            if _parent._mock_new_name == '()':
+                dot = ''
+
+            _parent = _parent._mock_new_parent
+
+        _name_list = list(reversed(_name_list))
+        _first = last._mock_name or 'mock'
+        if len(_name_list) > 1:
+            if _name_list[1] not in ('()', '().'):
+                _first += '.'
+        _name_list[0] = _first
+        return ''.join(_name_list)
+
+    def __repr__(self):
+        name = self._extract_mock_name()
+
+        name_string = ''
+        if name not in ('mock', 'mock.'):
+            name_string = ' name=%r' % name
+
+        spec_string = ''
+        if self._spec_class is not None:
+            spec_string = ' spec=%r'
+            if self._spec_set:
+                spec_string = ' spec_set=%r'
+            spec_string = spec_string % self._spec_class.__name__
+        return "<%s%s%s id='%s'>" % (
+            type(self).__name__,
+            name_string,
+            spec_string,
+            id(self)
+        )
+
+
+    def __dir__(self):
+        """Filter the output of `dir(mock)` to only useful members."""
+        if not FILTER_DIR:
+            return object.__dir__(self)
+
+        extras = self._mock_methods or []
+        from_type = dir(type(self))
+        from_dict = list(self.__dict__)
+        from_child_mocks = [
+            m_name for m_name, m_value in self._mock_children.items()
+            if m_value is not _deleted]
+
+        from_type = [e for e in from_type if not e.startswith('_')]
+        from_dict = [e for e in from_dict if not e.startswith('_') or
+                     _is_magic(e)]
+        return sorted(set(extras + from_type + from_dict + from_child_mocks))
+
+
+    def __setattr__(self, name, value):
+        if name in _allowed_names:
+            # property setters go through here
+            return object.__setattr__(self, name, value)
+        elif (self._spec_set and self._mock_methods is not None and
+            name not in self._mock_methods and
+            name not in self.__dict__):
+            raise AttributeError("Mock object has no attribute '%s'" % name)
+        elif name in _unsupported_magics:
+            msg = 'Attempting to set unsupported magic method %r.' % name
+            raise AttributeError(msg)
+        elif name in _all_magics:
+            if self._mock_methods is not None and name not in self._mock_methods:
+                raise AttributeError("Mock object has no attribute '%s'" % name)
+
+            if not _is_instance_mock(value):
+                setattr(type(self), name, _get_method(name, value))
+                original = value
+                value = lambda *args, **kw: original(self, *args, **kw)
+            else:
+                # only set _new_name and not name so that mock_calls is tracked
+                # but not method calls
+                _check_and_set_parent(self, value, None, name)
+                setattr(type(self), name, value)
+                self._mock_children[name] = value
+        elif name == '__class__':
+            self._spec_class = value
+            return
+        else:
+            if _check_and_set_parent(self, value, name, name):
+                self._mock_children[name] = value
+
+        if self._mock_sealed and not hasattr(self, name):
+            mock_name = f'{self._extract_mock_name()}.{name}'
+            raise AttributeError(f'Cannot set {mock_name}')
+
+        if isinstance(value, PropertyMock):
+            self.__dict__[name] = value
+            return
+        return object.__setattr__(self, name, value)
+
+
+    def __delattr__(self, name):
+        if name in _all_magics and name in type(self).__dict__:
+            delattr(type(self), name)
+            if name not in self.__dict__:
+                # for magic methods that are still MagicProxy objects and
+                # not set on the instance itself
+                return
+
+        obj = self._mock_children.get(name, _missing)
+        if name in self.__dict__:
+            _safe_super(NonCallableMock, self).__delattr__(name)
+        elif obj is _deleted:
+            raise AttributeError(name)
+        if obj is not _missing:
+            del self._mock_children[name]
+        self._mock_children[name] = _deleted
+
+
+    def _format_mock_call_signature(self, args, kwargs):
+        name = self._mock_name or 'mock'
+        return _format_call_signature(name, args, kwargs)
+
+
+    def _format_mock_failure_message(self, args, kwargs, action='call'):
+        message = 'expected %s not found.\nExpected: %s\n  Actual: %s'
+        expected_string = self._format_mock_call_signature(args, kwargs)
+        call_args = self.call_args
+        actual_string = self._format_mock_call_signature(*call_args)
+        return message % (action, expected_string, actual_string)
+
+
+    def _get_call_signature_from_name(self, name):
+        """
+        * If call objects are asserted against a method/function like obj.meth1
+        then there could be no name for the call object to lookup. Hence just
+        return the spec_signature of the method/function being asserted against.
+        * If the name is not empty then remove () and split by '.' to get
+        list of names to iterate through the children until a potential
+        match is found. A child mock is created only during attribute access
+        so if we get a _SpecState then no attributes of the spec were accessed
+        and can be safely exited.
+        """
+        if not name:
+            return self._spec_signature
+
+        sig = None
+        names = name.replace('()', '').split('.')
+        children = self._mock_children
+
+        for name in names:
+            child = children.get(name)
+            if child is None or isinstance(child, _SpecState):
+                break
+            else:
+                # If an autospecced object is attached using attach_mock the
+                # child would be a function with mock object as attribute from
+                # which signature has to be derived.
+                child = _extract_mock(child)
+                children = child._mock_children
+                sig = child._spec_signature
+
+        return sig
+
+
+    def _call_matcher(self, _call):
+        """
+        Given a call (or simply an (args, kwargs) tuple), return a
+        comparison key suitable for matching with other calls.
+        This is a best effort method which relies on the spec's signature,
+        if available, or falls back on the arguments themselves.
+        """
+
+        if isinstance(_call, tuple) and len(_call) > 2:
+            sig = self._get_call_signature_from_name(_call[0])
+        else:
+            sig = self._spec_signature
+
+        if sig is not None:
+            if len(_call) == 2:
+                name = ''
+                args, kwargs = _call
+            else:
+                name, args, kwargs = _call
+            try:
+                bound_call = sig.bind(*args, **kwargs)
+                return call(name, bound_call.args, bound_call.kwargs)
+            except TypeError as e:
+                return e.with_traceback(None)
+        else:
+            return _call
+
+    def assert_not_called(self):
+        """assert that the mock was never called.
+        """
+        if self.call_count != 0:
+            msg = ("Expected '%s' to not have been called. Called %s times.%s"
+                   % (self._mock_name or 'mock',
+                      self.call_count,
+                      self._calls_repr()))
+            raise AssertionError(msg)
+
+    def assert_called(self):
+        """assert that the mock was called at least once
+        """
+        if self.call_count == 0:
+            msg = ("Expected '%s' to have been called." %
+                   (self._mock_name or 'mock'))
+            raise AssertionError(msg)
+
+    def assert_called_once(self):
+        """assert that the mock was called only once.
+        """
+        if not self.call_count == 1:
+            msg = ("Expected '%s' to have been called once. Called %s times.%s"
+                   % (self._mock_name or 'mock',
+                      self.call_count,
+                      self._calls_repr()))
+            raise AssertionError(msg)
+
+    def assert_called_with(self, /, *args, **kwargs):
+        """assert that the last call was made with the specified arguments.
+
+        Raises an AssertionError if the args and keyword args passed in are
+        different to the last call to the mock."""
+        if self.call_args is None:
+            expected = self._format_mock_call_signature(args, kwargs)
+            actual = 'not called.'
+            error_message = ('expected call not found.\nExpected: %s\n  Actual: %s'
+                    % (expected, actual))
+            raise AssertionError(error_message)
+
+        def _error_message():
+            msg = self._format_mock_failure_message(args, kwargs)
+            return msg
+        expected = self._call_matcher(_Call((args, kwargs), two=True))
+        actual = self._call_matcher(self.call_args)
+        if actual != expected:
+            cause = expected if isinstance(expected, Exception) else None
+            raise AssertionError(_error_message()) from cause
+
+
+    def assert_called_once_with(self, /, *args, **kwargs):
+        """assert that the mock was called exactly once and that that call was
+        with the specified arguments."""
+        if not self.call_count == 1:
+            msg = ("Expected '%s' to be called once. Called %s times.%s"
+                   % (self._mock_name or 'mock',
+                      self.call_count,
+                      self._calls_repr()))
+            raise AssertionError(msg)
+        return self.assert_called_with(*args, **kwargs)
+
+
+    def assert_has_calls(self, calls, any_order=False):
+        """assert the mock has been called with the specified calls.
+        The `mock_calls` list is checked for the calls.
+
+        If `any_order` is False (the default) then the calls must be
+        sequential. There can be extra calls before or after the
+        specified calls.
+
+        If `any_order` is True then the calls can be in any order, but
+        they must all appear in `mock_calls`."""
+        expected = [self._call_matcher(c) for c in calls]
+        cause = next((e for e in expected if isinstance(e, Exception)), None)
+        all_calls = _CallList(self._call_matcher(c) for c in self.mock_calls)
+        if not any_order:
+            if expected not in all_calls:
+                if cause is None:
+                    problem = 'Calls not found.'
+                else:
+                    problem = ('Error processing expected calls.\n'
+                               'Errors: {}').format(
+                                   [e if isinstance(e, Exception) else None
+                                    for e in expected])
+                raise AssertionError(
+                    f'{problem}\n'
+                    f'Expected: {_CallList(calls)}\n'
+                    f'  Actual: {safe_repr(self.mock_calls)}'
+                ) from cause
+            return
+
+        all_calls = list(all_calls)
+
+        not_found = []
+        for kall in expected:
+            try:
+                all_calls.remove(kall)
+            except ValueError:
+                not_found.append(kall)
+        if not_found:
+            raise AssertionError(
+                '%r does not contain all of %r in its call list, '
+                'found %r instead' % (self._mock_name or 'mock',
+                                      tuple(not_found), all_calls)
+            ) from cause
+
+
+    def assert_any_call(self, /, *args, **kwargs):
+        """assert the mock has been called with the specified arguments.
+
+        The assert passes if the mock has *ever* been called, unlike
+        `assert_called_with` and `assert_called_once_with` that only pass if
+        the call is the most recent one."""
+        expected = self._call_matcher(_Call((args, kwargs), two=True))
+        cause = expected if isinstance(expected, Exception) else None
+        actual = [self._call_matcher(c) for c in self.call_args_list]
+        if cause or expected not in _AnyComparer(actual):
+            expected_string = self._format_mock_call_signature(args, kwargs)
+            raise AssertionError(
+                '%s call not found' % expected_string
+            ) from cause
+
+
+    def _get_child_mock(self, /, **kw):
+        """Create the child mocks for attributes and return value.
+        By default child mocks will be the same type as the parent.
+        Subclasses of Mock may want to override this to customize the way
+        child mocks are made.
+
+        For non-callable mocks the callable variant will be used (rather than
+        any custom subclass)."""
+        if self._mock_sealed:
+            attribute = f".{kw['name']}" if "name" in kw else "()"
+            mock_name = self._extract_mock_name() + attribute
+            raise AttributeError(mock_name)
+
+        _new_name = kw.get("_new_name")
+        if _new_name in self.__dict__['_spec_asyncs']:
+            return AsyncMock(**kw)
+
+        _type = type(self)
+        if issubclass(_type, MagicMock) and _new_name in _async_method_magics:
+            # Any asynchronous magic becomes an AsyncMock
+            klass = AsyncMock
+        elif issubclass(_type, AsyncMockMixin):
+            if (_new_name in _all_sync_magics or
+                    self._mock_methods and _new_name in self._mock_methods):
+                # Any synchronous method on AsyncMock becomes a MagicMock
+                klass = MagicMock
+            else:
+                klass = AsyncMock
+        elif not issubclass(_type, CallableMixin):
+            if issubclass(_type, NonCallableMagicMock):
+                klass = MagicMock
+            elif issubclass(_type, NonCallableMock):
+                klass = Mock
+        else:
+            klass = _type.__mro__[1]
+        return klass(**kw)
+
+
+    def _calls_repr(self):
+        """Renders self.mock_calls as a string.
+
+        Example: "\nCalls: [call(1), call(2)]."
+
+        If self.mock_calls is empty, an empty string is returned. The
+        output will be truncated if very long.
+        """
+        if not self.mock_calls:
+            return ""
+        return f"\nCalls: {safe_repr(self.mock_calls)}."
+
+
+# Denylist for forbidden attribute names in safe mode
+_ATTRIB_DENY_LIST = frozenset({
+    name.removeprefix("assert_")
+    for name in dir(NonCallableMock)
+    if name.startswith("assert_")
+})
+
+
+class _AnyComparer(list):
+    """A list which checks if it contains a call which may have an
+    argument of ANY, flipping the components of item and self from
+    their traditional locations so that ANY is guaranteed to be on
+    the left."""
+    def __contains__(self, item):
+        for _call in self:
+            assert len(item) == len(_call)
+            if all([
+                expected == actual
+                for expected, actual in zip(item, _call)
+            ]):
+                return True
+        return False
+
+
+def _try_iter(obj):
+    if obj is None:
+        return obj
+    if _is_exception(obj):
+        return obj
+    if _callable(obj):
+        return obj
+    try:
+        return iter(obj)
+    except TypeError:
+        # XXXX backwards compatibility
+        # but this will blow up on first call - so maybe we should fail early?
+        return obj
+
+
+class CallableMixin(Base):
+
+    def __init__(self, spec=None, side_effect=None, return_value=DEFAULT,
+                 wraps=None, name=None, spec_set=None, parent=None,
+                 _spec_state=None, _new_name='', _new_parent=None, **kwargs):
+        self.__dict__['_mock_return_value'] = return_value
+        _safe_super(CallableMixin, self).__init__(
+            spec, wraps, name, spec_set, parent,
+            _spec_state, _new_name, _new_parent, **kwargs
+        )
+
+        self.side_effect = side_effect
+
+
+    def _mock_check_sig(self, /, *args, **kwargs):
+        # stub method that can be replaced with one with a specific signature
+        pass
+
+
+    def __call__(self, /, *args, **kwargs):
+        # can't use self in-case a function / method we are mocking uses self
+        # in the signature
+        self._mock_check_sig(*args, **kwargs)
+        self._increment_mock_call(*args, **kwargs)
+        return self._mock_call(*args, **kwargs)
+
+
+    def _mock_call(self, /, *args, **kwargs):
+        return self._execute_mock_call(*args, **kwargs)
+
+    def _increment_mock_call(self, /, *args, **kwargs):
+        self.called = True
+
+        # handle call_args
+        # needs to be set here so assertions on call arguments pass before
+        # execution in the case of awaited calls
+        with NonCallableMock._lock:
+            # Lock is used here so that call_args_list and call_count are
+            # set atomically otherwise it is possible that by the time call_count
+            # is set another thread may have appended to call_args_list.
+            # The rest of this function relies on list.append being atomic and
+            # skips locking.
+            _call = _Call((args, kwargs), two=True)
+            self.call_args = _call
+            self.call_args_list.append(_call)
+            self.call_count = len(self.call_args_list)
+
+        # initial stuff for method_calls:
+        do_method_calls = self._mock_parent is not None
+        method_call_name = self._mock_name
+
+        # initial stuff for mock_calls:
+        mock_call_name = self._mock_new_name
+        is_a_call = mock_call_name == '()'
+        self.mock_calls.append(_Call(('', args, kwargs)))
+
+        # follow up the chain of mocks:
+        _new_parent = self._mock_new_parent
+        while _new_parent is not None:
+
+            # handle method_calls:
+            if do_method_calls:
+                _new_parent.method_calls.append(_Call((method_call_name, args, kwargs)))
+                do_method_calls = _new_parent._mock_parent is not None
+                if do_method_calls:
+                    method_call_name = _new_parent._mock_name + '.' + method_call_name
+
+            # handle mock_calls:
+            this_mock_call = _Call((mock_call_name, args, kwargs))
+            _new_parent.mock_calls.append(this_mock_call)
+
+            if _new_parent._mock_new_name:
+                if is_a_call:
+                    dot = ''
+                else:
+                    dot = '.'
+                is_a_call = _new_parent._mock_new_name == '()'
+                mock_call_name = _new_parent._mock_new_name + dot + mock_call_name
+
+            # follow the parental chain:
+            _new_parent = _new_parent._mock_new_parent
+
+    def _execute_mock_call(self, /, *args, **kwargs):
+        # separate from _increment_mock_call so that awaited functions are
+        # executed separately from their call, also AsyncMock overrides this method
+
+        effect = self.side_effect
+        if effect is not None:
+            if _is_exception(effect):
+                raise effect
+            elif not _callable(effect):
+                result = next(effect)
+                if _is_exception(result):
+                    raise result
+            else:
+                result = effect(*args, **kwargs)
+
+            if result is not DEFAULT:
+                return result
+
+        if self._mock_return_value is not DEFAULT:
+            return self.return_value
+
+        if self._mock_delegate and self._mock_delegate.return_value is not DEFAULT:
+            return self.return_value
+
+        if self._mock_wraps is not None:
+            return self._mock_wraps(*args, **kwargs)
+
+        return self.return_value
+
+
+
+class Mock(CallableMixin, NonCallableMock):
+    """
+    Create a new `Mock` object. `Mock` takes several optional arguments
+    that specify the behaviour of the Mock object:
+
+    * `spec`: This can be either a list of strings or an existing object (a
+      class or instance) that acts as the specification for the mock object. If
+      you pass in an object then a list of strings is formed by calling dir on
+      the object (excluding unsupported magic attributes and methods). Accessing
+      any attribute not in this list will raise an `AttributeError`.
+
+      If `spec` is an object (rather than a list of strings) then
+      `mock.__class__` returns the class of the spec object. This allows mocks
+      to pass `isinstance` tests.
+
+    * `spec_set`: A stricter variant of `spec`. If used, attempting to *set*
+      or get an attribute on the mock that isn't on the object passed as
+      `spec_set` will raise an `AttributeError`.
+
+    * `side_effect`: A function to be called whenever the Mock is called. See
+      the `side_effect` attribute. Useful for raising exceptions or
+      dynamically changing return values. The function is called with the same
+      arguments as the mock, and unless it returns `DEFAULT`, the return
+      value of this function is used as the return value.
+
+      If `side_effect` is an iterable then each call to the mock will return
+      the next value from the iterable. If any of the members of the iterable
+      are exceptions they will be raised instead of returned.
+
+    * `return_value`: The value returned when the mock is called. By default
+      this is a new Mock (created on first access). See the
+      `return_value` attribute.
+
+    * `unsafe`: By default, accessing any attribute whose name starts with
+      *assert*, *assret*, *asert*, *aseert*, or *assrt* raises an AttributeError.
+      Additionally, an AttributeError is raised when accessing
+      attributes that match the name of an assertion method without the prefix
+      `assert_`, e.g. accessing `called_once` instead of `assert_called_once`.
+      Passing `unsafe=True` will allow access to these attributes.
+
+    * `wraps`: Item for the mock object to wrap. If `wraps` is not None then
+      calling the Mock will pass the call through to the wrapped object
+      (returning the real result). Attribute access on the mock will return a
+      Mock object that wraps the corresponding attribute of the wrapped object
+      (so attempting to access an attribute that doesn't exist will raise an
+      `AttributeError`).
+
+      If the mock has an explicit `return_value` set then calls are not passed
+      to the wrapped object and the `return_value` is returned instead.
+
+    * `name`: If the mock has a name then it will be used in the repr of the
+      mock. This can be useful for debugging. The name is propagated to child
+      mocks.
+
+    Mocks can also be called with arbitrary keyword arguments. These will be
+    used to set attributes on the mock after it is created.
+    """
+
+
+# _check_spec_arg_typos takes kwargs from commands like patch and checks that
+# they don't contain common misspellings of arguments related to autospeccing.
+def _check_spec_arg_typos(kwargs_to_check):
+    typos = ("autospect", "auto_spec", "set_spec")
+    for typo in typos:
+        if typo in kwargs_to_check:
+            raise RuntimeError(
+                f"{typo!r} might be a typo; use unsafe=True if this is intended"
+            )
+
+
+class _patch(object):
+
+    attribute_name = None
+    _active_patches = []
+
+    def __init__(
+            self, getter, attribute, new, spec, create,
+            spec_set, autospec, new_callable, kwargs, *, unsafe=False
+        ):
+        if new_callable is not None:
+            if new is not DEFAULT:
+                raise ValueError(
+                    "Cannot use 'new' and 'new_callable' together"
+                )
+            if autospec is not None:
+                raise ValueError(
+                    "Cannot use 'autospec' and 'new_callable' together"
+                )
+        if not unsafe:
+            _check_spec_arg_typos(kwargs)
+        if _is_instance_mock(spec):
+            raise InvalidSpecError(
+                f'Cannot spec attr {attribute!r} as the spec '
+                f'has already been mocked out. [spec={spec!r}]')
+        if _is_instance_mock(spec_set):
+            raise InvalidSpecError(
+                f'Cannot spec attr {attribute!r} as the spec_set '
+                f'target has already been mocked out. [spec_set={spec_set!r}]')
+
+        self.getter = getter
+        self.attribute = attribute
+        self.new = new
+        self.new_callable = new_callable
+        self.spec = spec
+        self.create = create
+        self.has_local = False
+        self.spec_set = spec_set
+        self.autospec = autospec
+        self.kwargs = kwargs
+        self.additional_patchers = []
+        self.is_started = False
+
+
+    def copy(self):
+        patcher = _patch(
+            self.getter, self.attribute, self.new, self.spec,
+            self.create, self.spec_set,
+            self.autospec, self.new_callable, self.kwargs
+        )
+        patcher.attribute_name = self.attribute_name
+        patcher.additional_patchers = [
+            p.copy() for p in self.additional_patchers
+        ]
+        return patcher
+
+
+    def __call__(self, func):
+        if isinstance(func, type):
+            return self.decorate_class(func)
+        if inspect.iscoroutinefunction(func):
+            return self.decorate_async_callable(func)
+        return self.decorate_callable(func)
+
+
+    def decorate_class(self, klass):
+        for attr in dir(klass):
+            if not attr.startswith(patch.TEST_PREFIX):
+                continue
+
+            attr_value = getattr(klass, attr)
+            if not hasattr(attr_value, "__call__"):
+                continue
+
+            patcher = self.copy()
+            setattr(klass, attr, patcher(attr_value))
+        return klass
+
+
+    @contextlib.contextmanager
+    def decoration_helper(self, patched, args, keywargs):
+        extra_args = []
+        with contextlib.ExitStack() as exit_stack:
+            for patching in patched.patchings:
+                arg = exit_stack.enter_context(patching)
+                if patching.attribute_name is not None:
+                    keywargs.update(arg)
+                elif patching.new is DEFAULT:
+                    extra_args.append(arg)
+
+            args += tuple(extra_args)
+            yield (args, keywargs)
+
+
+    def decorate_callable(self, func):
+        # NB. Keep the method in sync with decorate_async_callable()
+        if hasattr(func, 'patchings'):
+            func.patchings.append(self)
+            return func
+
+        @wraps(func)
+        def patched(*args, **keywargs):
+            with self.decoration_helper(patched,
+                                        args,
+                                        keywargs) as (newargs, newkeywargs):
+                return func(*newargs, **newkeywargs)
+
+        patched.patchings = [self]
+        return patched
+
+
+    def decorate_async_callable(self, func):
+        # NB. Keep the method in sync with decorate_callable()
+        if hasattr(func, 'patchings'):
+            func.patchings.append(self)
+            return func
+
+        @wraps(func)
+        async def patched(*args, **keywargs):
+            with self.decoration_helper(patched,
+                                        args,
+                                        keywargs) as (newargs, newkeywargs):
+                return await func(*newargs, **newkeywargs)
+
+        patched.patchings = [self]
+        return patched
+
+
+    def get_original(self):
+        target = self.getter()
+        name = self.attribute
+
+        original = DEFAULT
+        local = False
+
+        try:
+            original = target.__dict__[name]
+        except (AttributeError, KeyError):
+            original = getattr(target, name, DEFAULT)
+        else:
+            local = True
+
+        if name in _builtins and isinstance(target, ModuleType):
+            self.create = True
+
+        if not self.create and original is DEFAULT:
+            raise AttributeError(
+                "%s does not have the attribute %r" % (target, name)
+            )
+        return original, local
+
+
+    def __enter__(self):
+        """Perform the patch."""
+        if self.is_started:
+            raise RuntimeError("Patch is already started")
+
+        new, spec, spec_set = self.new, self.spec, self.spec_set
+        autospec, kwargs = self.autospec, self.kwargs
+        new_callable = self.new_callable
+        self.target = self.getter()
+
+        # normalise False to None
+        if spec is False:
+            spec = None
+        if spec_set is False:
+            spec_set = None
+        if autospec is False:
+            autospec = None
+
+        if spec is not None and autospec is not None:
+            raise TypeError("Can't specify spec and autospec")
+        if ((spec is not None or autospec is not None) and
+            spec_set not in (True, None)):
+            raise TypeError("Can't provide explicit spec_set *and* spec or autospec")
+
+        original, local = self.get_original()
+
+        if new is DEFAULT and autospec is None:
+            inherit = False
+            if spec is True:
+                # set spec to the object we are replacing
+                spec = original
+                if spec_set is True:
+                    spec_set = original
+                    spec = None
+            elif spec is not None:
+                if spec_set is True:
+                    spec_set = spec
+                    spec = None
+            elif spec_set is True:
+                spec_set = original
+
+            if spec is not None or spec_set is not None:
+                if original is DEFAULT:
+                    raise TypeError("Can't use 'spec' with create=True")
+                if isinstance(original, type):
+                    # If we're patching out a class and there is a spec
+                    inherit = True
+
+            # Determine the Klass to use
+            if new_callable is not None:
+                Klass = new_callable
+            elif spec is None and _is_async_obj(original):
+                Klass = AsyncMock
+            elif spec is not None or spec_set is not None:
+                this_spec = spec
+                if spec_set is not None:
+                    this_spec = spec_set
+                if _is_list(this_spec):
+                    not_callable = '__call__' not in this_spec
+                else:
+                    not_callable = not callable(this_spec)
+                if _is_async_obj(this_spec):
+                    Klass = AsyncMock
+                elif not_callable:
+                    Klass = NonCallableMagicMock
+                else:
+                    Klass = MagicMock
+            else:
+                Klass = MagicMock
+
+            _kwargs = {}
+            if spec is not None:
+                _kwargs['spec'] = spec
+            if spec_set is not None:
+                _kwargs['spec_set'] = spec_set
+
+            # add a name to mocks
+            if (isinstance(Klass, type) and
+                issubclass(Klass, NonCallableMock) and self.attribute):
+                _kwargs['name'] = self.attribute
+
+            _kwargs.update(kwargs)
+            new = Klass(**_kwargs)
+
+            if inherit and _is_instance_mock(new):
+                # we can only tell if the instance should be callable if the
+                # spec is not a list
+                this_spec = spec
+                if spec_set is not None:
+                    this_spec = spec_set
+                if (not _is_list(this_spec) and not
+                    _instance_callable(this_spec)):
+                    Klass = NonCallableMagicMock
+
+                _kwargs.pop('name')
+                new.return_value = Klass(_new_parent=new, _new_name='()',
+                                         **_kwargs)
+        elif autospec is not None:
+            # spec is ignored, new *must* be default, spec_set is treated
+            # as a boolean. Should we check spec is not None and that spec_set
+            # is a bool?
+            if new is not DEFAULT:
+                raise TypeError(
+                    "autospec creates the mock for you. Can't specify "
+                    "autospec and new."
+                )
+            if original is DEFAULT:
+                raise TypeError("Can't use 'autospec' with create=True")
+            spec_set = bool(spec_set)
+            if autospec is True:
+                autospec = original
+
+            if _is_instance_mock(self.target):
+                raise InvalidSpecError(
+                    f'Cannot autospec attr {self.attribute!r} as the patch '
+                    f'target has already been mocked out. '
+                    f'[target={self.target!r}, attr={autospec!r}]')
+            if _is_instance_mock(autospec):
+                target_name = getattr(self.target, '__name__', self.target)
+                raise InvalidSpecError(
+                    f'Cannot autospec attr {self.attribute!r} from target '
+                    f'{target_name!r} as it has already been mocked out. '
+                    f'[target={self.target!r}, attr={autospec!r}]')
+
+            new = create_autospec(autospec, spec_set=spec_set,
+                                  _name=self.attribute, **kwargs)
+        elif kwargs:
+            # can't set keyword args when we aren't creating the mock
+            # XXXX If new is a Mock we could call new.configure_mock(**kwargs)
+            raise TypeError("Can't pass kwargs to a mock we aren't creating")
+
+        new_attr = new
+
+        self.temp_original = original
+        self.is_local = local
+        self._exit_stack = contextlib.ExitStack()
+        self.is_started = True
+        try:
+            setattr(self.target, self.attribute, new_attr)
+            if self.attribute_name is not None:
+                extra_args = {}
+                if self.new is DEFAULT:
+                    extra_args[self.attribute_name] =  new
+                for patching in self.additional_patchers:
+                    arg = self._exit_stack.enter_context(patching)
+                    if patching.new is DEFAULT:
+                        extra_args.update(arg)
+                return extra_args
+
+            return new
+        except:
+            if not self.__exit__(*sys.exc_info()):
+                raise
+
+    def __exit__(self, *exc_info):
+        """Undo the patch."""
+        if not self.is_started:
+            return
+
+        if self.is_local and self.temp_original is not DEFAULT:
+            setattr(self.target, self.attribute, self.temp_original)
+        else:
+            delattr(self.target, self.attribute)
+            if not self.create and (not hasattr(self.target, self.attribute) or
+                        self.attribute in ('__doc__', '__module__',
+                                           '__defaults__', '__annotations__',
+                                           '__kwdefaults__')):
+                # needed for proxy objects like django settings
+                setattr(self.target, self.attribute, self.temp_original)
+
+        del self.temp_original
+        del self.is_local
+        del self.target
+        exit_stack = self._exit_stack
+        del self._exit_stack
+        self.is_started = False
+        return exit_stack.__exit__(*exc_info)
+
+
+    def start(self):
+        """Activate a patch, returning any created mock."""
+        result = self.__enter__()
+        self._active_patches.append(self)
+        return result
+
+
+    def stop(self):
+        """Stop an active patch."""
+        try:
+            self._active_patches.remove(self)
+        except ValueError:
+            # If the patch hasn't been started this will fail
+            return None
+
+        return self.__exit__(None, None, None)
+
+
+
+def _get_target(target):
+    try:
+        target, attribute = target.rsplit('.', 1)
+    except (TypeError, ValueError, AttributeError):
+        raise TypeError(
+            f"Need a valid target to patch. You supplied: {target!r}")
+    return partial(pkgutil.resolve_name, target), attribute
+
+
+def _patch_object(
+        target, attribute, new=DEFAULT, spec=None,
+        create=False, spec_set=None, autospec=None,
+        new_callable=None, *, unsafe=False, **kwargs
+    ):
+    """
+    patch the named member (`attribute`) on an object (`target`) with a mock
+    object.
+
+    `patch.object` can be used as a decorator, class decorator or a context
+    manager. Arguments `new`, `spec`, `create`, `spec_set`,
+    `autospec` and `new_callable` have the same meaning as for `patch`. Like
+    `patch`, `patch.object` takes arbitrary keyword arguments for configuring
+    the mock object it creates.
+
+    When used as a class decorator `patch.object` honours `patch.TEST_PREFIX`
+    for choosing which methods to wrap.
+    """
+    if type(target) is str:
+        raise TypeError(
+            f"{target!r} must be the actual object to be patched, not a str"
+        )
+    getter = lambda: target
+    return _patch(
+        getter, attribute, new, spec, create,
+        spec_set, autospec, new_callable, kwargs, unsafe=unsafe
+    )
+
+
+def _patch_multiple(target, spec=None, create=False, spec_set=None,
+                    autospec=None, new_callable=None, **kwargs):
+    """Perform multiple patches in a single call. It takes the object to be
+    patched (either as an object or a string to fetch the object by importing)
+    and keyword arguments for the patches::
+
+        with patch.multiple(settings, FIRST_PATCH='one', SECOND_PATCH='two'):
+            ...
+
+    Use `DEFAULT` as the value if you want `patch.multiple` to create
+    mocks for you. In this case the created mocks are passed into a decorated
+    function by keyword, and a dictionary is returned when `patch.multiple` is
+    used as a context manager.
+
+    `patch.multiple` can be used as a decorator, class decorator or a context
+    manager. The arguments `spec`, `spec_set`, `create`,
+    `autospec` and `new_callable` have the same meaning as for `patch`. These
+    arguments will be applied to *all* patches done by `patch.multiple`.
+
+    When used as a class decorator `patch.multiple` honours `patch.TEST_PREFIX`
+    for choosing which methods to wrap.
+    """
+    if type(target) is str:
+        getter = partial(pkgutil.resolve_name, target)
+    else:
+        getter = lambda: target
+
+    if not kwargs:
+        raise ValueError(
+            'Must supply at least one keyword argument with patch.multiple'
+        )
+    # need to wrap in a list for python 3, where items is a view
+    items = list(kwargs.items())
+    attribute, new = items[0]
+    patcher = _patch(
+        getter, attribute, new, spec, create, spec_set,
+        autospec, new_callable, {}
+    )
+    patcher.attribute_name = attribute
+    for attribute, new in items[1:]:
+        this_patcher = _patch(
+            getter, attribute, new, spec, create, spec_set,
+            autospec, new_callable, {}
+        )
+        this_patcher.attribute_name = attribute
+        patcher.additional_patchers.append(this_patcher)
+    return patcher
+
+
+def patch(
+        target, new=DEFAULT, spec=None, create=False,
+        spec_set=None, autospec=None, new_callable=None, *, unsafe=False, **kwargs
+    ):
+    """
+    `patch` acts as a function decorator, class decorator or a context
+    manager. Inside the body of the function or with statement, the `target`
+    is patched with a `new` object. When the function/with statement exits
+    the patch is undone.
+
+    If `new` is omitted, then the target is replaced with an
+    `AsyncMock` if the patched object is an async function or a
+    `MagicMock` otherwise. If `patch` is used as a decorator and `new` is
+    omitted, the created mock is passed in as an extra argument to the
+    decorated function. If `patch` is used as a context manager the created
+    mock is returned by the context manager.
+
+    `target` should be a string in the form `'package.module.ClassName'`. The
+    `target` is imported and the specified object replaced with the `new`
+    object, so the `target` must be importable from the environment you are
+    calling `patch` from. The target is imported when the decorated function
+    is executed, not at decoration time.
+
+    The `spec` and `spec_set` keyword arguments are passed to the `MagicMock`
+    if patch is creating one for you.
+
+    In addition you can pass `spec=True` or `spec_set=True`, which causes
+    patch to pass in the object being mocked as the spec/spec_set object.
+
+    `new_callable` allows you to specify a different class, or callable object,
+    that will be called to create the `new` object. By default `AsyncMock` is
+    used for async functions and `MagicMock` for the rest.
+
+    A more powerful form of `spec` is `autospec`. If you set `autospec=True`
+    then the mock will be created with a spec from the object being replaced.
+    All attributes of the mock will also have the spec of the corresponding
+    attribute of the object being replaced. Methods and functions being
+    mocked will have their arguments checked and will raise a `TypeError` if
+    they are called with the wrong signature. For mocks replacing a class,
+    their return value (the 'instance') will have the same spec as the class.
+
+    Instead of `autospec=True` you can pass `autospec=some_object` to use an
+    arbitrary object as the spec instead of the one being replaced.
+
+    By default `patch` will fail to replace attributes that don't exist. If
+    you pass in `create=True`, and the attribute doesn't exist, patch will
+    create the attribute for you when the patched function is called, and
+    delete it again afterwards. This is useful for writing tests against
+    attributes that your production code creates at runtime. It is off by
+    default because it can be dangerous. With it switched on you can write
+    passing tests against APIs that don't actually exist!
+
+    Patch can be used as a `TestCase` class decorator. It works by
+    decorating each test method in the class. This reduces the boilerplate
+    code when your test methods share a common patchings set. `patch` finds
+    tests by looking for method names that start with `patch.TEST_PREFIX`.
+    By default this is `test`, which matches the way `unittest` finds tests.
+    You can specify an alternative prefix by setting `patch.TEST_PREFIX`.
+
+    Patch can be used as a context manager, with the with statement. Here the
+    patching applies to the indented block after the with statement. If you
+    use "as" then the patched object will be bound to the name after the
+    "as"; very useful if `patch` is creating a mock object for you.
+
+    Patch will raise a `RuntimeError` if passed some common misspellings of
+    the arguments autospec and spec_set. Pass the argument `unsafe` with the
+    value True to disable that check.
+
+    `patch` takes arbitrary keyword arguments. These will be passed to
+    `AsyncMock` if the patched object is asynchronous, to `MagicMock`
+    otherwise or to `new_callable` if specified.
+
+    `patch.dict(...)`, `patch.multiple(...)` and `patch.object(...)` are
+    available for alternate use-cases.
+    """
+    getter, attribute = _get_target(target)
+    return _patch(
+        getter, attribute, new, spec, create,
+        spec_set, autospec, new_callable, kwargs, unsafe=unsafe
+    )
+
+
+class _patch_dict(object):
+    """
+    Patch a dictionary, or dictionary like object, and restore the dictionary
+    to its original state after the test, where the restored dictionary is
+    a copy of the dictionary as it was before the test.
+
+    `in_dict` can be a dictionary or a mapping like container. If it is a
+    mapping then it must at least support getting, setting and deleting items
+    plus iterating over keys.
+
+    `in_dict` can also be a string specifying the name of the dictionary, which
+    will then be fetched by importing it.
+
+    `values` can be a dictionary of values to set in the dictionary. `values`
+    can also be an iterable of `(key, value)` pairs.
+
+    If `clear` is True then the dictionary will be cleared before the new
+    values are set.
+
+    `patch.dict` can also be called with arbitrary keyword arguments to set
+    values in the dictionary::
+
+        with patch.dict('sys.modules', mymodule=Mock(), other_module=Mock()):
+            ...
+
+    `patch.dict` can be used as a context manager, decorator or class
+    decorator. When used as a class decorator `patch.dict` honours
+    `patch.TEST_PREFIX` for choosing which methods to wrap.
+    """
+
+    def __init__(self, in_dict, values=(), clear=False, **kwargs):
+        self.in_dict = in_dict
+        # support any argument supported by dict(...) constructor
+        self.values = dict(values)
+        self.values.update(kwargs)
+        self.clear = clear
+        self._original = None
+
+
+    def __call__(self, f):
+        if isinstance(f, type):
+            return self.decorate_class(f)
+        if inspect.iscoroutinefunction(f):
+            return self.decorate_async_callable(f)
+        return self.decorate_callable(f)
+
+
+    def decorate_callable(self, f):
+        @wraps(f)
+        def _inner(*args, **kw):
+            self._patch_dict()
+            try:
+                return f(*args, **kw)
+            finally:
+                self._unpatch_dict()
+
+        return _inner
+
+
+    def decorate_async_callable(self, f):
+        @wraps(f)
+        async def _inner(*args, **kw):
+            self._patch_dict()
+            try:
+                return await f(*args, **kw)
+            finally:
+                self._unpatch_dict()
+
+        return _inner
+
+
+    def decorate_class(self, klass):
+        for attr in dir(klass):
+            attr_value = getattr(klass, attr)
+            if (attr.startswith(patch.TEST_PREFIX) and
+                 hasattr(attr_value, "__call__")):
+                decorator = _patch_dict(self.in_dict, self.values, self.clear)
+                decorated = decorator(attr_value)
+                setattr(klass, attr, decorated)
+        return klass
+
+
+    def __enter__(self):
+        """Patch the dict."""
+        self._patch_dict()
+        return self.in_dict
+
+
+    def _patch_dict(self):
+        values = self.values
+        if isinstance(self.in_dict, str):
+            self.in_dict = pkgutil.resolve_name(self.in_dict)
+        in_dict = self.in_dict
+        clear = self.clear
+
+        try:
+            original = in_dict.copy()
+        except AttributeError:
+            # dict like object with no copy method
+            # must support iteration over keys
+            original = {}
+            for key in in_dict:
+                original[key] = in_dict[key]
+        self._original = original
+
+        if clear:
+            _clear_dict(in_dict)
+
+        try:
+            in_dict.update(values)
+        except AttributeError:
+            # dict like object with no update method
+            for key in values:
+                in_dict[key] = values[key]
+
+
+    def _unpatch_dict(self):
+        in_dict = self.in_dict
+        original = self._original
+
+        _clear_dict(in_dict)
+
+        try:
+            in_dict.update(original)
+        except AttributeError:
+            for key in original:
+                in_dict[key] = original[key]
+
+
+    def __exit__(self, *args):
+        """Unpatch the dict."""
+        if self._original is not None:
+            self._unpatch_dict()
+        return False
+
+
+    def start(self):
+        """Activate a patch, returning any created mock."""
+        result = self.__enter__()
+        _patch._active_patches.append(self)
+        return result
+
+
+    def stop(self):
+        """Stop an active patch."""
+        try:
+            _patch._active_patches.remove(self)
+        except ValueError:
+            # If the patch hasn't been started this will fail
+            return None
+
+        return self.__exit__(None, None, None)
+
+
+def _clear_dict(in_dict):
+    try:
+        in_dict.clear()
+    except AttributeError:
+        keys = list(in_dict)
+        for key in keys:
+            del in_dict[key]
+
+
+def _patch_stopall():
+    """Stop all active patches. LIFO to unroll nested patches."""
+    for patch in reversed(_patch._active_patches):
+        patch.stop()
+
+
+patch.object = _patch_object
+patch.dict = _patch_dict
+patch.multiple = _patch_multiple
+patch.stopall = _patch_stopall
+patch.TEST_PREFIX = 'test'
+
+magic_methods = (
+    "lt le gt ge eq ne "
+    "getitem setitem delitem "
+    "len contains iter "
+    "hash str sizeof "
+    "enter exit "
+    # we added divmod and rdivmod here instead of numerics
+    # because there is no idivmod
+    "divmod rdivmod neg pos abs invert "
+    "complex int float index "
+    "round trunc floor ceil "
+    "bool next "
+    "fspath "
+    "aiter "
+)
+
+numerics = (
+    "add sub mul matmul truediv floordiv mod lshift rshift and xor or pow"
+)
+inplace = ' '.join('i%s' % n for n in numerics.split())
+right = ' '.join('r%s' % n for n in numerics.split())
+
+# not including __prepare__, __instancecheck__, __subclasscheck__
+# (as they are metaclass methods)
+# __del__ is not supported at all as it causes problems if it exists
+
+_non_defaults = {
+    '__get__', '__set__', '__delete__', '__reversed__', '__missing__',
+    '__reduce__', '__reduce_ex__', '__getinitargs__', '__getnewargs__',
+    '__getstate__', '__setstate__', '__getformat__',
+    '__repr__', '__dir__', '__subclasses__', '__format__',
+    '__getnewargs_ex__',
+}
+
+
+def _get_method(name, func):
+    "Turns a callable object (like a mock) into a real function"
+    def method(self, /, *args, **kw):
+        return func(self, *args, **kw)
+    method.__name__ = name
+    return method
+
+
+_magics = {
+    '__%s__' % method for method in
+    ' '.join([magic_methods, numerics, inplace, right]).split()
+}
+
+# Magic methods used for async `with` statements
+_async_method_magics = {"__aenter__", "__aexit__", "__anext__"}
+# Magic methods that are only used with async calls but are synchronous functions themselves
+_sync_async_magics = {"__aiter__"}
+_async_magics = _async_method_magics | _sync_async_magics
+
+_all_sync_magics = _magics | _non_defaults
+_all_magics = _all_sync_magics | _async_magics
+
+_unsupported_magics = {
+    '__getattr__', '__setattr__',
+    '__init__', '__new__', '__prepare__',
+    '__instancecheck__', '__subclasscheck__',
+    '__del__'
+}
+
+_calculate_return_value = {
+    '__hash__': lambda self: object.__hash__(self),
+    '__str__': lambda self: object.__str__(self),
+    '__sizeof__': lambda self: object.__sizeof__(self),
+    '__fspath__': lambda self: f"{type(self).__name__}/{self._extract_mock_name()}/{id(self)}",
+}
+
+_return_values = {
+    '__lt__': NotImplemented,
+    '__gt__': NotImplemented,
+    '__le__': NotImplemented,
+    '__ge__': NotImplemented,
+    '__int__': 1,
+    '__contains__': False,
+    '__len__': 0,
+    '__exit__': False,
+    '__complex__': 1j,
+    '__float__': 1.0,
+    '__bool__': True,
+    '__index__': 1,
+    '__aexit__': False,
+}
+
+
+def _get_eq(self):
+    def __eq__(other):
+        ret_val = self.__eq__._mock_return_value
+        if ret_val is not DEFAULT:
+            return ret_val
+        if self is other:
+            return True
+        return NotImplemented
+    return __eq__
+
+def _get_ne(self):
+    def __ne__(other):
+        if self.__ne__._mock_return_value is not DEFAULT:
+            return DEFAULT
+        if self is other:
+            return False
+        return NotImplemented
+    return __ne__
+
+def _get_iter(self):
+    def __iter__():
+        ret_val = self.__iter__._mock_return_value
+        if ret_val is DEFAULT:
+            return iter([])
+        # if ret_val was already an iterator, then calling iter on it should
+        # return the iterator unchanged
+        return iter(ret_val)
+    return __iter__
+
+def _get_async_iter(self):
+    def __aiter__():
+        ret_val = self.__aiter__._mock_return_value
+        if ret_val is DEFAULT:
+            return _AsyncIterator(iter([]))
+        return _AsyncIterator(iter(ret_val))
+    return __aiter__
+
+_side_effect_methods = {
+    '__eq__': _get_eq,
+    '__ne__': _get_ne,
+    '__iter__': _get_iter,
+    '__aiter__': _get_async_iter
+}
+
+
+
+def _set_return_value(mock, method, name):
+    fixed = _return_values.get(name, DEFAULT)
+    if fixed is not DEFAULT:
+        method.return_value = fixed
+        return
+
+    return_calculator = _calculate_return_value.get(name)
+    if return_calculator is not None:
+        return_value = return_calculator(mock)
+        method.return_value = return_value
+        return
+
+    side_effector = _side_effect_methods.get(name)
+    if side_effector is not None:
+        method.side_effect = side_effector(mock)
+
+
+
+class MagicMixin(Base):
+    def __init__(self, /, *args, **kw):
+        self._mock_set_magics()  # make magic work for kwargs in init
+        _safe_super(MagicMixin, self).__init__(*args, **kw)
+        self._mock_set_magics()  # fix magic broken by upper level init
+
+
+    def _mock_set_magics(self):
+        orig_magics = _magics | _async_method_magics
+        these_magics = orig_magics
+
+        if getattr(self, "_mock_methods", None) is not None:
+            these_magics = orig_magics.intersection(self._mock_methods)
+            remove_magics = orig_magics - these_magics
+
+            for entry in remove_magics:
+                if entry in type(self).__dict__:
+                    # remove unneeded magic methods
+                    delattr(self, entry)
+
+        # don't overwrite existing attributes if called a second time
+        these_magics = these_magics - set(type(self).__dict__)
+
+        _type = type(self)
+        for entry in these_magics:
+            setattr(_type, entry, MagicProxy(entry, self))
+
+
+
+class NonCallableMagicMock(MagicMixin, NonCallableMock):
+    """A version of `MagicMock` that isn't callable."""
+    def mock_add_spec(self, spec, spec_set=False):
+        """Add a spec to a mock. `spec` can either be an object or a
+        list of strings. Only attributes on the `spec` can be fetched as
+        attributes from the mock.
+
+        If `spec_set` is True then only attributes on the spec can be set."""
+        self._mock_add_spec(spec, spec_set)
+        self._mock_set_magics()
+
+
+class AsyncMagicMixin(MagicMixin):
+    pass
+
+
+class MagicMock(MagicMixin, Mock):
+    """
+    MagicMock is a subclass of Mock with default implementations
+    of most of the magic methods. You can use MagicMock without having to
+    configure the magic methods yourself.
+
+    If you use the `spec` or `spec_set` arguments then *only* magic
+    methods that exist in the spec will be created.
+
+    Attributes and the return value of a `MagicMock` will also be `MagicMocks`.
+    """
+    def mock_add_spec(self, spec, spec_set=False):
+        """Add a spec to a mock. `spec` can either be an object or a
+        list of strings. Only attributes on the `spec` can be fetched as
+        attributes from the mock.
+
+        If `spec_set` is True then only attributes on the spec can be set."""
+        self._mock_add_spec(spec, spec_set)
+        self._mock_set_magics()
+
+    def reset_mock(self, /, *args, return_value: bool = False, **kwargs):
+        if (
+            return_value
+            and self._mock_name
+            and _is_magic(self._mock_name)
+        ):
+            # Don't reset return values for magic methods,
+            # otherwise `m.__str__` will start
+            # to return `MagicMock` instances, instead of `str` instances.
+            return_value = False
+        super().reset_mock(*args, return_value=return_value, **kwargs)
+
+
+class MagicProxy(Base):
+    def __init__(self, name, parent):
+        self.name = name
+        self.parent = parent
+
+    def create_mock(self):
+        entry = self.name
+        parent = self.parent
+        m = parent._get_child_mock(name=entry, _new_name=entry,
+                                   _new_parent=parent)
+        setattr(parent, entry, m)
+        _set_return_value(parent, m, entry)
+        return m
+
+    def __get__(self, obj, _type=None):
+        return self.create_mock()
+
+
+try:
+    _CODE_SIG = inspect.signature(partial(CodeType.__init__, None))
+    _CODE_ATTRS = dir(CodeType)
+except ValueError:
+    _CODE_SIG = None
+
+
+class AsyncMockMixin(Base):
+    await_count = _delegating_property('await_count')
+    await_args = _delegating_property('await_args')
+    await_args_list = _delegating_property('await_args_list')
+
+    def __init__(self, /, *args, **kwargs):
+        super().__init__(*args, **kwargs)
+        # iscoroutinefunction() checks _is_coroutine property to say if an
+        # object is a coroutine. Without this check it looks to see if it is a
+        # function/method, which in this case it is not (since it is an
+        # AsyncMock).
+        # It is set through __dict__ because when spec_set is True, this
+        # attribute is likely undefined.
+        self.__dict__['_is_coroutine'] = asyncio.coroutines._is_coroutine
+        self.__dict__['_mock_await_count'] = 0
+        self.__dict__['_mock_await_args'] = None
+        self.__dict__['_mock_await_args_list'] = _CallList()
+        if _CODE_SIG:
+            code_mock = NonCallableMock(spec_set=_CODE_ATTRS)
+            code_mock.__dict__["_spec_class"] = CodeType
+            code_mock.__dict__["_spec_signature"] = _CODE_SIG
+        else:
+            code_mock = NonCallableMock(spec_set=CodeType)
+        code_mock.co_flags = (
+            inspect.CO_COROUTINE
+            + inspect.CO_VARARGS
+            + inspect.CO_VARKEYWORDS
+        )
+        code_mock.co_argcount = 0
+        code_mock.co_varnames = ('args', 'kwargs')
+        code_mock.co_posonlyargcount = 0
+        code_mock.co_kwonlyargcount = 0
+        self.__dict__['__code__'] = code_mock
+        self.__dict__['__name__'] = 'AsyncMock'
+        self.__dict__['__defaults__'] = tuple()
+        self.__dict__['__kwdefaults__'] = {}
+        self.__dict__['__annotations__'] = None
+
+    async def _execute_mock_call(self, /, *args, **kwargs):
+        # This is nearly just like super(), except for special handling
+        # of coroutines
+
+        _call = _Call((args, kwargs), two=True)
+        self.await_count += 1
+        self.await_args = _call
+        self.await_args_list.append(_call)
+
+        effect = self.side_effect
+        if effect is not None:
+            if _is_exception(effect):
+                raise effect
+            elif not _callable(effect):
+                try:
+                    result = next(effect)
+                except StopIteration:
+                    # It is impossible to propagate a StopIteration
+                    # through coroutines because of PEP 479
+                    raise StopAsyncIteration
+                if _is_exception(result):
+                    raise result
+            elif iscoroutinefunction(effect):
+                result = await effect(*args, **kwargs)
+            else:
+                result = effect(*args, **kwargs)
+
+            if result is not DEFAULT:
+                return result
+
+        if self._mock_return_value is not DEFAULT:
+            return self.return_value
+
+        if self._mock_wraps is not None:
+            if iscoroutinefunction(self._mock_wraps):
+                return await self._mock_wraps(*args, **kwargs)
+            return self._mock_wraps(*args, **kwargs)
+
+        return self.return_value
+
+    def assert_awaited(self):
+        """
+        Assert that the mock was awaited at least once.
+        """
+        if self.await_count == 0:
+            msg = f"Expected {self._mock_name or 'mock'} to have been awaited."
+            raise AssertionError(msg)
+
+    def assert_awaited_once(self):
+        """
+        Assert that the mock was awaited exactly once.
+        """
+        if not self.await_count == 1:
+            msg = (f"Expected {self._mock_name or 'mock'} to have been awaited once."
+                   f" Awaited {self.await_count} times.")
+            raise AssertionError(msg)
+
+    def assert_awaited_with(self, /, *args, **kwargs):
+        """
+        Assert that the last await was with the specified arguments.
+        """
+        if self.await_args is None:
+            expected = self._format_mock_call_signature(args, kwargs)
+            raise AssertionError(f'Expected await: {expected}\nNot awaited')
+
+        def _error_message():
+            msg = self._format_mock_failure_message(args, kwargs, action='await')
+            return msg
+
+        expected = self._call_matcher(_Call((args, kwargs), two=True))
+        actual = self._call_matcher(self.await_args)
+        if actual != expected:
+            cause = expected if isinstance(expected, Exception) else None
+            raise AssertionError(_error_message()) from cause
+
+    def assert_awaited_once_with(self, /, *args, **kwargs):
+        """
+        Assert that the mock was awaited exactly once and with the specified
+        arguments.
+        """
+        if not self.await_count == 1:
+            msg = (f"Expected {self._mock_name or 'mock'} to have been awaited once."
+                   f" Awaited {self.await_count} times.")
+            raise AssertionError(msg)
+        return self.assert_awaited_with(*args, **kwargs)
+
+    def assert_any_await(self, /, *args, **kwargs):
+        """
+        Assert the mock has ever been awaited with the specified arguments.
+        """
+        expected = self._call_matcher(_Call((args, kwargs), two=True))
+        cause = expected if isinstance(expected, Exception) else None
+        actual = [self._call_matcher(c) for c in self.await_args_list]
+        if cause or expected not in _AnyComparer(actual):
+            expected_string = self._format_mock_call_signature(args, kwargs)
+            raise AssertionError(
+                '%s await not found' % expected_string
+            ) from cause
+
+    def assert_has_awaits(self, calls, any_order=False):
+        """
+        Assert the mock has been awaited with the specified calls.
+        The :attr:`await_args_list` list is checked for the awaits.
+
+        If `any_order` is False (the default) then the awaits must be
+        sequential. There can be extra calls before or after the
+        specified awaits.
+
+        If `any_order` is True then the awaits can be in any order, but
+        they must all appear in :attr:`await_args_list`.
+        """
+        expected = [self._call_matcher(c) for c in calls]
+        cause = next((e for e in expected if isinstance(e, Exception)), None)
+        all_awaits = _CallList(self._call_matcher(c) for c in self.await_args_list)
+        if not any_order:
+            if expected not in all_awaits:
+                if cause is None:
+                    problem = 'Awaits not found.'
+                else:
+                    problem = ('Error processing expected awaits.\n'
+                               'Errors: {}').format(
+                                   [e if isinstance(e, Exception) else None
+                                    for e in expected])
+                raise AssertionError(
+                    f'{problem}\n'
+                    f'Expected: {_CallList(calls)}\n'
+                    f'Actual: {self.await_args_list}'
+                ) from cause
+            return
+
+        all_awaits = list(all_awaits)
+
+        not_found = []
+        for kall in expected:
+            try:
+                all_awaits.remove(kall)
+            except ValueError:
+                not_found.append(kall)
+        if not_found:
+            raise AssertionError(
+                '%r not all found in await list' % (tuple(not_found),)
+            ) from cause
+
+    def assert_not_awaited(self):
+        """
+        Assert that the mock was never awaited.
+        """
+        if self.await_count != 0:
+            msg = (f"Expected {self._mock_name or 'mock'} to not have been awaited."
+                   f" Awaited {self.await_count} times.")
+            raise AssertionError(msg)
+
+    def reset_mock(self, /, *args, **kwargs):
+        """
+        See :func:`.Mock.reset_mock()`
+        """
+        super().reset_mock(*args, **kwargs)
+        self.await_count = 0
+        self.await_args = None
+        self.await_args_list = _CallList()
+
+
+class AsyncMock(AsyncMockMixin, AsyncMagicMixin, Mock):
+    """
+    Enhance :class:`Mock` with features allowing to mock
+    an async function.
+
+    The :class:`AsyncMock` object will behave so the object is
+    recognized as an async function, and the result of a call is an awaitable:
+
+    >>> mock = AsyncMock()
+    >>> inspect.iscoroutinefunction(mock)
+    True
+    >>> inspect.isawaitable(mock())
+    True
+
+
+    The result of ``mock()`` is an async function which will have the outcome
+    of ``side_effect`` or ``return_value``:
+
+    - if ``side_effect`` is a function, the async function will return the
+      result of that function,
+    - if ``side_effect`` is an exception, the async function will raise the
+      exception,
+    - if ``side_effect`` is an iterable, the async function will return the
+      next value of the iterable, however, if the sequence of result is
+      exhausted, ``StopIteration`` is raised immediately,
+    - if ``side_effect`` is not defined, the async function will return the
+      value defined by ``return_value``, hence, by default, the async function
+      returns a new :class:`AsyncMock` object.
+
+    If the outcome of ``side_effect`` or ``return_value`` is an async function,
+    the mock async function obtained when the mock object is called will be this
+    async function itself (and not an async function returning an async
+    function).
+
+    The test author can also specify a wrapped object with ``wraps``. In this
+    case, the :class:`Mock` object behavior is the same as with an
+    :class:`.Mock` object: the wrapped object may have methods
+    defined as async function functions.
+
+    Based on Martin Richard's asynctest project.
+    """
+
+
+class _ANY(object):
+    "A helper object that compares equal to everything."
+
+    def __eq__(self, other):
+        return True
+
+    def __ne__(self, other):
+        return False
+
+    def __repr__(self):
+        return '<ANY>'
+
+ANY = _ANY()
+
+
+
+def _format_call_signature(name, args, kwargs):
+    message = '%s(%%s)' % name
+    formatted_args = ''
+    args_string = ', '.join([repr(arg) for arg in args])
+    kwargs_string = ', '.join([
+        '%s=%r' % (key, value) for key, value in kwargs.items()
+    ])
+    if args_string:
+        formatted_args = args_string
+    if kwargs_string:
+        if formatted_args:
+            formatted_args += ', '
+        formatted_args += kwargs_string
+
+    return message % formatted_args
+
+
+
+class _Call(tuple):
+    """
+    A tuple for holding the results of a call to a mock, either in the form
+    `(args, kwargs)` or `(name, args, kwargs)`.
+
+    If args or kwargs are empty then a call tuple will compare equal to
+    a tuple without those values. This makes comparisons less verbose::
+
+        _Call(('name', (), {})) == ('name',)
+        _Call(('name', (1,), {})) == ('name', (1,))
+        _Call(((), {'a': 'b'})) == ({'a': 'b'},)
+
+    The `_Call` object provides a useful shortcut for comparing with call::
+
+        _Call(((1, 2), {'a': 3})) == call(1, 2, a=3)
+        _Call(('foo', (1, 2), {'a': 3})) == call.foo(1, 2, a=3)
+
+    If the _Call has no name then it will match any name.
+    """
+    def __new__(cls, value=(), name='', parent=None, two=False,
+                from_kall=True):
+        args = ()
+        kwargs = {}
+        _len = len(value)
+        if _len == 3:
+            name, args, kwargs = value
+        elif _len == 2:
+            first, second = value
+            if isinstance(first, str):
+                name = first
+                if isinstance(second, tuple):
+                    args = second
+                else:
+                    kwargs = second
+            else:
+                args, kwargs = first, second
+        elif _len == 1:
+            value, = value
+            if isinstance(value, str):
+                name = value
+            elif isinstance(value, tuple):
+                args = value
+            else:
+                kwargs = value
+
+        if two:
+            return tuple.__new__(cls, (args, kwargs))
+
+        return tuple.__new__(cls, (name, args, kwargs))
+
+
+    def __init__(self, value=(), name=None, parent=None, two=False,
+                 from_kall=True):
+        self._mock_name = name
+        self._mock_parent = parent
+        self._mock_from_kall = from_kall
+
+
+    def __eq__(self, other):
+        try:
+            len_other = len(other)
+        except TypeError:
+            return NotImplemented
+
+        self_name = ''
+        if len(self) == 2:
+            self_args, self_kwargs = self
+        else:
+            self_name, self_args, self_kwargs = self
+
+        if (getattr(self, '_mock_parent', None) and getattr(other, '_mock_parent', None)
+                and self._mock_parent != other._mock_parent):
+            return False
+
+        other_name = ''
+        if len_other == 0:
+            other_args, other_kwargs = (), {}
+        elif len_other == 3:
+            other_name, other_args, other_kwargs = other
+        elif len_other == 1:
+            value, = other
+            if isinstance(value, tuple):
+                other_args = value
+                other_kwargs = {}
+            elif isinstance(value, str):
+                other_name = value
+                other_args, other_kwargs = (), {}
+            else:
+                other_args = ()
+                other_kwargs = value
+        elif len_other == 2:
+            # could be (name, args) or (name, kwargs) or (args, kwargs)
+            first, second = other
+            if isinstance(first, str):
+                other_name = first
+                if isinstance(second, tuple):
+                    other_args, other_kwargs = second, {}
+                else:
+                    other_args, other_kwargs = (), second
+            else:
+                other_args, other_kwargs = first, second
+        else:
+            return False
+
+        if self_name and other_name != self_name:
+            return False
+
+        # this order is important for ANY to work!
+        return (other_args, other_kwargs) == (self_args, self_kwargs)
+
+
+    __ne__ = object.__ne__
+
+
+    def __call__(self, /, *args, **kwargs):
+        if self._mock_name is None:
+            return _Call(('', args, kwargs), name='()')
+
+        name = self._mock_name + '()'
+        return _Call((self._mock_name, args, kwargs), name=name, parent=self)
+
+
+    def __getattr__(self, attr):
+        if self._mock_name is None:
+            return _Call(name=attr, from_kall=False)
+        name = '%s.%s' % (self._mock_name, attr)
+        return _Call(name=name, parent=self, from_kall=False)
+
+
+    def __getattribute__(self, attr):
+        if attr in tuple.__dict__:
+            raise AttributeError
+        return tuple.__getattribute__(self, attr)
+
+
+    def _get_call_arguments(self):
+        if len(self) == 2:
+            args, kwargs = self
+        else:
+            name, args, kwargs = self
+
+        return args, kwargs
+
+    @property
+    def args(self):
+        return self._get_call_arguments()[0]
+
+    @property
+    def kwargs(self):
+        return self._get_call_arguments()[1]
+
+    def __repr__(self):
+        if not self._mock_from_kall:
+            name = self._mock_name or 'call'
+            if name.startswith('()'):
+                name = 'call%s' % name
+            return name
+
+        if len(self) == 2:
+            name = 'call'
+            args, kwargs = self
+        else:
+            name, args, kwargs = self
+            if not name:
+                name = 'call'
+            elif not name.startswith('()'):
+                name = 'call.%s' % name
+            else:
+                name = 'call%s' % name
+        return _format_call_signature(name, args, kwargs)
+
+
+    def call_list(self):
+        """For a call object that represents multiple calls, `call_list`
+        returns a list of all the intermediate calls as well as the
+        final call."""
+        vals = []
+        thing = self
+        while thing is not None:
+            if thing._mock_from_kall:
+                vals.append(thing)
+            thing = thing._mock_parent
+        return _CallList(reversed(vals))
+
+
+call = _Call(from_kall=False)
+
+
+def create_autospec(spec, spec_set=False, instance=False, _parent=None,
+                    _name=None, *, unsafe=False, **kwargs):
+    """Create a mock object using another object as a spec. Attributes on the
+    mock will use the corresponding attribute on the `spec` object as their
+    spec.
+
+    Functions or methods being mocked will have their arguments checked
+    to check that they are called with the correct signature.
+
+    If `spec_set` is True then attempting to set attributes that don't exist
+    on the spec object will raise an `AttributeError`.
+
+    If a class is used as a spec then the return value of the mock (the
+    instance of the class) will have the same spec. You can use a class as the
+    spec for an instance object by passing `instance=True`. The returned mock
+    will only be callable if instances of the mock are callable.
+
+    `create_autospec` will raise a `RuntimeError` if passed some common
+    misspellings of the arguments autospec and spec_set. Pass the argument
+    `unsafe` with the value True to disable that check.
+
+    `create_autospec` also takes arbitrary keyword arguments that are passed to
+    the constructor of the created mock."""
+    if _is_list(spec):
+        # can't pass a list instance to the mock constructor as it will be
+        # interpreted as a list of strings
+        spec = type(spec)
+
+    is_type = isinstance(spec, type)
+    if _is_instance_mock(spec):
+        raise InvalidSpecError(f'Cannot autospec a Mock object. '
+                               f'[object={spec!r}]')
+    is_async_func = _is_async_func(spec)
+    _kwargs = {'spec': spec}
+
+    entries = [(entry, _missing) for entry in dir(spec)]
+    if is_type and instance and is_dataclass(spec):
+        is_dataclass_spec = True
+        dataclass_fields = fields(spec)
+        entries.extend((f.name, f.type) for f in dataclass_fields)
+        dataclass_spec_list = [f.name for f in dataclass_fields]
+    else:
+        is_dataclass_spec = False
+
+    if spec_set:
+        _kwargs = {'spec_set': spec}
+    elif spec is None:
+        # None we mock with a normal mock without a spec
+        _kwargs = {}
+    if _kwargs and instance:
+        _kwargs['_spec_as_instance'] = True
+    if not unsafe:
+        _check_spec_arg_typos(kwargs)
+
+    _name = kwargs.pop('name', _name)
+    _new_name = _name
+    if _parent is None:
+        # for a top level object no _new_name should be set
+        _new_name = ''
+
+    _kwargs.update(kwargs)
+
+    Klass = MagicMock
+    if inspect.isdatadescriptor(spec):
+        # descriptors don't have a spec
+        # because we don't know what type they return
+        _kwargs = {}
+    elif is_async_func:
+        if instance:
+            raise RuntimeError("Instance can not be True when create_autospec "
+                               "is mocking an async function")
+        Klass = AsyncMock
+    elif not _callable(spec):
+        Klass = NonCallableMagicMock
+    elif is_type and instance and not _instance_callable(spec):
+        Klass = NonCallableMagicMock
+
+    mock = Klass(parent=_parent, _new_parent=_parent, _new_name=_new_name,
+                 name=_name, **_kwargs)
+    if is_dataclass_spec:
+        mock._mock_extend_spec_methods(dataclass_spec_list)
+
+    if isinstance(spec, FunctionTypes):
+        # should only happen at the top level because we don't
+        # recurse for functions
+        if is_async_func:
+            mock = _set_async_signature(mock, spec)
+        else:
+            mock = _set_signature(mock, spec)
+    else:
+        _check_signature(spec, mock, is_type, instance)
+
+    if _parent is not None and not instance:
+        _parent._mock_children[_name] = mock
+
+    # Pop wraps from kwargs because it must not be passed to configure_mock.
+    wrapped = kwargs.pop('wraps', None)
+    if is_type and not instance and 'return_value' not in kwargs:
+        mock.return_value = create_autospec(spec, spec_set, instance=True,
+                                            _name='()', _parent=mock,
+                                            wraps=wrapped)
+
+    for entry, original in entries:
+        if _is_magic(entry):
+            # MagicMock already does the useful magic methods for us
+            continue
+
+        # XXXX do we need a better way of getting attributes without
+        # triggering code execution (?) Probably not - we need the actual
+        # object to mock it so we would rather trigger a property than mock
+        # the property descriptor. Likewise we want to mock out dynamically
+        # provided attributes.
+        # XXXX what about attributes that raise exceptions other than
+        # AttributeError on being fetched?
+        # we could be resilient against it, or catch and propagate the
+        # exception when the attribute is fetched from the mock
+        if original is _missing:
+            try:
+                original = getattr(spec, entry)
+            except AttributeError:
+                continue
+
+        child_kwargs = {'spec': original}
+        # Wrap child attributes also.
+        if wrapped and hasattr(wrapped, entry):
+            child_kwargs.update(wraps=original)
+        if spec_set:
+            child_kwargs = {'spec_set': original}
+
+        if not isinstance(original, FunctionTypes):
+            new = _SpecState(original, spec_set, mock, entry, instance)
+            mock._mock_children[entry] = new
+        else:
+            parent = mock
+            if isinstance(spec, FunctionTypes):
+                parent = mock.mock
+
+            skipfirst = _must_skip(spec, entry, is_type)
+            child_kwargs['_eat_self'] = skipfirst
+            if iscoroutinefunction(original):
+                child_klass = AsyncMock
+            else:
+                child_klass = MagicMock
+            new = child_klass(parent=parent, name=entry, _new_name=entry,
+                              _new_parent=parent, **child_kwargs)
+            mock._mock_children[entry] = new
+            new.return_value = child_klass()
+            _check_signature(original, new, skipfirst=skipfirst)
+
+        # so functions created with _set_signature become instance attributes,
+        # *plus* their underlying mock exists in _mock_children of the parent
+        # mock. Adding to _mock_children may be unnecessary where we are also
+        # setting as an instance attribute?
+        if isinstance(new, FunctionTypes):
+            setattr(mock, entry, new)
+    # kwargs are passed with respect to the parent mock so, they are not used
+    # for creating return_value of the parent mock. So, this condition
+    # should be true only for the parent mock if kwargs are given.
+    if _is_instance_mock(mock) and kwargs:
+        mock.configure_mock(**kwargs)
+
+    return mock
+
+
+def _must_skip(spec, entry, is_type):
+    """
+    Return whether we should skip the first argument on spec's `entry`
+    attribute.
+    """
+    if not isinstance(spec, type):
+        if entry in getattr(spec, '__dict__', {}):
+            # instance attribute - shouldn't skip
+            return False
+        spec = spec.__class__
+
+    for klass in spec.__mro__:
+        result = klass.__dict__.get(entry, DEFAULT)
+        if result is DEFAULT:
+            continue
+        if isinstance(result, (staticmethod, classmethod)):
+            return False
+        elif isinstance(result, FunctionTypes):
+            # Normal method => skip if looked up on type
+            # (if looked up on instance, self is already skipped)
+            return is_type
+        else:
+            return False
+
+    # function is a dynamically provided attribute
+    return is_type
+
+
+class _SpecState(object):
+
+    def __init__(self, spec, spec_set=False, parent=None,
+                 name=None, ids=None, instance=False):
+        self.spec = spec
+        self.ids = ids
+        self.spec_set = spec_set
+        self.parent = parent
+        self.instance = instance
+        self.name = name
+
+
+FunctionTypes = (
+    # python function
+    type(create_autospec),
+    # instance method
+    type(ANY.__eq__),
+)
+
+
+file_spec = None
+open_spec = None
+
+
+def _to_stream(read_data):
+    if isinstance(read_data, bytes):
+        return io.BytesIO(read_data)
+    else:
+        return io.StringIO(read_data)
+
+
+def mock_open(mock=None, read_data=''):
+    """
+    A helper function to create a mock to replace the use of `open`. It works
+    for `open` called directly or used as a context manager.
+
+    The `mock` argument is the mock object to configure. If `None` (the
+    default) then a `MagicMock` will be created for you, with the API limited
+    to methods or attributes available on standard file handles.
+
+    `read_data` is a string for the `read`, `readline` and `readlines` of the
+    file handle to return.  This is an empty string by default.
+    """
+    _read_data = _to_stream(read_data)
+    _state = [_read_data, None]
+
+    def _readlines_side_effect(*args, **kwargs):
+        if handle.readlines.return_value is not None:
+            return handle.readlines.return_value
+        return _state[0].readlines(*args, **kwargs)
+
+    def _read_side_effect(*args, **kwargs):
+        if handle.read.return_value is not None:
+            return handle.read.return_value
+        return _state[0].read(*args, **kwargs)
+
+    def _readline_side_effect(*args, **kwargs):
+        yield from _iter_side_effect()
+        while True:
+            yield _state[0].readline(*args, **kwargs)
+
+    def _iter_side_effect():
+        if handle.readline.return_value is not None:
+            while True:
+                yield handle.readline.return_value
+        for line in _state[0]:
+            yield line
+
+    def _next_side_effect():
+        if handle.readline.return_value is not None:
+            return handle.readline.return_value
+        return next(_state[0])
+
+    def _exit_side_effect(exctype, excinst, exctb):
+        handle.close()
+
+    global file_spec
+    if file_spec is None:
+        import _io
+        file_spec = list(set(dir(_io.TextIOWrapper)).union(set(dir(_io.BytesIO))))
+
+    global open_spec
+    if open_spec is None:
+        import _io
+        open_spec = list(set(dir(_io.open)))
+    if mock is None:
+        mock = MagicMock(name='open', spec=open_spec)
+
+    handle = MagicMock(spec=file_spec)
+    handle.__enter__.return_value = handle
+
+    handle.write.return_value = None
+    handle.read.return_value = None
+    handle.readline.return_value = None
+    handle.readlines.return_value = None
+
+    handle.read.side_effect = _read_side_effect
+    _state[1] = _readline_side_effect()
+    handle.readline.side_effect = _state[1]
+    handle.readlines.side_effect = _readlines_side_effect
+    handle.__iter__.side_effect = _iter_side_effect
+    handle.__next__.side_effect = _next_side_effect
+    handle.__exit__.side_effect = _exit_side_effect
+
+    def reset_data(*args, **kwargs):
+        _state[0] = _to_stream(read_data)
+        if handle.readline.side_effect == _state[1]:
+            # Only reset the side effect if the user hasn't overridden it.
+            _state[1] = _readline_side_effect()
+            handle.readline.side_effect = _state[1]
+        return DEFAULT
+
+    mock.side_effect = reset_data
+    mock.return_value = handle
+    return mock
+
+
+class PropertyMock(Mock):
+    """
+    A mock intended to be used as a property, or other descriptor, on a class.
+    `PropertyMock` provides `__get__` and `__set__` methods so you can specify
+    a return value when it is fetched.
+
+    Fetching a `PropertyMock` instance from an object calls the mock, with
+    no args. Setting it calls the mock with the value being set.
+    """
+    def _get_child_mock(self, /, **kwargs):
+        return MagicMock(**kwargs)
+
+    def __get__(self, obj, obj_type=None):
+        return self()
+    def __set__(self, obj, val):
+        self(val)
+
+
+_timeout_unset = sentinel.TIMEOUT_UNSET
+
+class ThreadingMixin(Base):
+
+    DEFAULT_TIMEOUT = None
+
+    def _get_child_mock(self, /, **kw):
+        if isinstance(kw.get("parent"), ThreadingMixin):
+            kw["timeout"] = kw["parent"]._mock_wait_timeout
+        elif isinstance(kw.get("_new_parent"), ThreadingMixin):
+            kw["timeout"] = kw["_new_parent"]._mock_wait_timeout
+        return super()._get_child_mock(**kw)
+
+    def __init__(self, *args, timeout=_timeout_unset, **kwargs):
+        super().__init__(*args, **kwargs)
+        if timeout is _timeout_unset:
+            timeout = self.DEFAULT_TIMEOUT
+        self.__dict__["_mock_event"] = threading.Event()  # Event for any call
+        self.__dict__["_mock_calls_events"] = []  # Events for each of the calls
+        self.__dict__["_mock_calls_events_lock"] = threading.Lock()
+        self.__dict__["_mock_wait_timeout"] = timeout
+
+    def reset_mock(self, /, *args, **kwargs):
+        """
+        See :func:`.Mock.reset_mock()`
+        """
+        super().reset_mock(*args, **kwargs)
+        self.__dict__["_mock_event"] = threading.Event()
+        self.__dict__["_mock_calls_events"] = []
+
+    def __get_event(self, expected_args, expected_kwargs):
+        with self._mock_calls_events_lock:
+            for args, kwargs, event in self._mock_calls_events:
+                if (args, kwargs) == (expected_args, expected_kwargs):
+                    return event
+            new_event = threading.Event()
+            self._mock_calls_events.append((expected_args, expected_kwargs, new_event))
+        return new_event
+
+    def _mock_call(self, *args, **kwargs):
+        ret_value = super()._mock_call(*args, **kwargs)
+
+        call_event = self.__get_event(args, kwargs)
+        call_event.set()
+
+        self._mock_event.set()
+
+        return ret_value
+
+    def wait_until_called(self, *, timeout=_timeout_unset):
+        """Wait until the mock object is called.
+
+        `timeout` - time to wait for in seconds, waits forever otherwise.
+        Defaults to the constructor provided timeout.
+        Use None to block undefinetively.
+        """
+        if timeout is _timeout_unset:
+            timeout = self._mock_wait_timeout
+        if not self._mock_event.wait(timeout=timeout):
+            msg = (f"{self._mock_name or 'mock'} was not called before"
+                   f" timeout({timeout}).")
+            raise AssertionError(msg)
+
+    def wait_until_any_call_with(self, *args, **kwargs):
+        """Wait until the mock object is called with given args.
+
+        Waits for the timeout in seconds provided in the constructor.
+        """
+        event = self.__get_event(args, kwargs)
+        if not event.wait(timeout=self._mock_wait_timeout):
+            expected_string = self._format_mock_call_signature(args, kwargs)
+            raise AssertionError(f'{expected_string} call not found')
+
+
+class ThreadingMock(ThreadingMixin, MagicMixin, Mock):
+    """
+    A mock that can be used to wait until on calls happening
+    in a different thread.
+
+    The constructor can take a `timeout` argument which
+    controls the timeout in seconds for all `wait` calls of the mock.
+
+    You can change the default timeout of all instances via the
+    `ThreadingMock.DEFAULT_TIMEOUT` attribute.
+
+    If no timeout is set, it will block undefinetively.
+    """
+    pass
+
+
+def seal(mock):
+    """Disable the automatic generation of child mocks.
+
+    Given an input Mock, seals it to ensure no further mocks will be generated
+    when accessing an attribute that was not already defined.
+
+    The operation recursively seals the mock passed in, meaning that
+    the mock itself, any mocks generated by accessing one of its attributes,
+    and all assigned mocks without a name or spec will be sealed.
+    """
+    mock._mock_sealed = True
+    for attr in dir(mock):
+        try:
+            m = getattr(mock, attr)
+        except AttributeError:
+            continue
+        if not isinstance(m, NonCallableMock):
+            continue
+        if isinstance(m._mock_children.get(attr), _SpecState):
+            continue
+        if m._mock_new_parent is mock:
+            seal(m)
+
+
+class _AsyncIterator:
+    """
+    Wraps an iterator in an asynchronous iterator.
+    """
+    def __init__(self, iterator):
+        self.iterator = iterator
+        code_mock = NonCallableMock(spec_set=CodeType)
+        code_mock.co_flags = inspect.CO_ITERABLE_COROUTINE
+        self.__dict__['__code__'] = code_mock
+
+    async def __anext__(self):
+        try:
+            return next(self.iterator)
+        except StopIteration:
+            pass
+        raise StopAsyncIteration
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/result.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/result.py
new file mode 100644
index 0000000000000000000000000000000000000000..b8ea396db6772edbcae66f6e724763bb42ab0473
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/result.py
@@ -0,0 +1,259 @@
+"""Test result object"""
+
+import io
+import sys
+import traceback
+
+from . import util
+from functools import wraps
+
+__unittest = True
+
+def failfast(method):
+    @wraps(method)
+    def inner(self, *args, **kw):
+        if getattr(self, 'failfast', False):
+            self.stop()
+        return method(self, *args, **kw)
+    return inner
+
+STDOUT_LINE = '\nStdout:\n%s'
+STDERR_LINE = '\nStderr:\n%s'
+
+
+class TestResult(object):
+    """Holder for test result information.
+
+    Test results are automatically managed by the TestCase and TestSuite
+    classes, and do not need to be explicitly manipulated by writers of tests.
+
+    Each instance holds the total number of tests run, and collections of
+    failures and errors that occurred among those test runs. The collections
+    contain tuples of (testcase, exceptioninfo), where exceptioninfo is the
+    formatted traceback of the error that occurred.
+    """
+    _previousTestClass = None
+    _testRunEntered = False
+    _moduleSetUpFailed = False
+    def __init__(self, stream=None, descriptions=None, verbosity=None):
+        self.failfast = False
+        self.failures = []
+        self.errors = []
+        self.testsRun = 0
+        self.skipped = []
+        self.expectedFailures = []
+        self.unexpectedSuccesses = []
+        self.collectedDurations = []
+        self.shouldStop = False
+        self.buffer = False
+        self.tb_locals = False
+        self._stdout_buffer = None
+        self._stderr_buffer = None
+        self._original_stdout = sys.stdout
+        self._original_stderr = sys.stderr
+        self._mirrorOutput = False
+
+    def printErrors(self):
+        "Called by TestRunner after test run"
+
+    def startTest(self, test):
+        "Called when the given test is about to be run"
+        self.testsRun += 1
+        self._mirrorOutput = False
+        self._setupStdout()
+
+    def _setupStdout(self):
+        if self.buffer:
+            if self._stderr_buffer is None:
+                self._stderr_buffer = io.StringIO()
+                self._stdout_buffer = io.StringIO()
+            sys.stdout = self._stdout_buffer
+            sys.stderr = self._stderr_buffer
+
+    def startTestRun(self):
+        """Called once before any tests are executed.
+
+        See startTest for a method called before each test.
+        """
+
+    def stopTest(self, test):
+        """Called when the given test has been run"""
+        self._restoreStdout()
+        self._mirrorOutput = False
+
+    def _restoreStdout(self):
+        if self.buffer:
+            if self._mirrorOutput:
+                output = sys.stdout.getvalue()
+                error = sys.stderr.getvalue()
+                if output:
+                    if not output.endswith('\n'):
+                        output += '\n'
+                    self._original_stdout.write(STDOUT_LINE % output)
+                if error:
+                    if not error.endswith('\n'):
+                        error += '\n'
+                    self._original_stderr.write(STDERR_LINE % error)
+
+            sys.stdout = self._original_stdout
+            sys.stderr = self._original_stderr
+            self._stdout_buffer.seek(0)
+            self._stdout_buffer.truncate()
+            self._stderr_buffer.seek(0)
+            self._stderr_buffer.truncate()
+
+    def stopTestRun(self):
+        """Called once after all tests are executed.
+
+        See stopTest for a method called after each test.
+        """
+
+    @failfast
+    def addError(self, test, err):
+        """Called when an error has occurred. 'err' is a tuple of values as
+        returned by sys.exc_info().
+        """
+        self.errors.append((test, self._exc_info_to_string(err, test)))
+        self._mirrorOutput = True
+
+    @failfast
+    def addFailure(self, test, err):
+        """Called when an error has occurred. 'err' is a tuple of values as
+        returned by sys.exc_info()."""
+        self.failures.append((test, self._exc_info_to_string(err, test)))
+        self._mirrorOutput = True
+
+    def addSubTest(self, test, subtest, err):
+        """Called at the end of a subtest.
+        'err' is None if the subtest ended successfully, otherwise it's a
+        tuple of values as returned by sys.exc_info().
+        """
+        # By default, we don't do anything with successful subtests, but
+        # more sophisticated test results might want to record them.
+        if err is not None:
+            if getattr(self, 'failfast', False):
+                self.stop()
+            if issubclass(err[0], test.failureException):
+                errors = self.failures
+            else:
+                errors = self.errors
+            errors.append((subtest, self._exc_info_to_string(err, test)))
+            self._mirrorOutput = True
+
+    def addSuccess(self, test):
+        "Called when a test has completed successfully"
+        pass
+
+    def addSkip(self, test, reason):
+        """Called when a test is skipped."""
+        self.skipped.append((test, reason))
+
+    def addExpectedFailure(self, test, err):
+        """Called when an expected failure/error occurred."""
+        self.expectedFailures.append(
+            (test, self._exc_info_to_string(err, test)))
+
+    @failfast
+    def addUnexpectedSuccess(self, test):
+        """Called when a test was expected to fail, but succeed."""
+        self.unexpectedSuccesses.append(test)
+
+    def addDuration(self, test, elapsed):
+        """Called when a test finished to run, regardless of its outcome.
+        *test* is the test case corresponding to the test method.
+        *elapsed* is the time represented in seconds, and it includes the
+        execution of cleanup functions.
+        """
+        # support for a TextTestRunner using an old TestResult class
+        if hasattr(self, "collectedDurations"):
+            # Pass test repr and not the test object itself to avoid resources leak
+            self.collectedDurations.append((str(test), elapsed))
+
+    def wasSuccessful(self):
+        """Tells whether or not this result was a success."""
+        # The hasattr check is for test_result's OldResult test.  That
+        # way this method works on objects that lack the attribute.
+        # (where would such result instances come from? old stored pickles?)
+        return ((len(self.failures) == len(self.errors) == 0) and
+                (not hasattr(self, 'unexpectedSuccesses') or
+                 len(self.unexpectedSuccesses) == 0))
+
+    def stop(self):
+        """Indicates that the tests should be aborted."""
+        self.shouldStop = True
+
+    def _exc_info_to_string(self, err, test):
+        """Converts a sys.exc_info()-style tuple of values into a string."""
+        exctype, value, tb = err
+        tb = self._clean_tracebacks(exctype, value, tb, test)
+        tb_e = traceback.TracebackException(
+            exctype, value, tb,
+            capture_locals=self.tb_locals, compact=True)
+        from _colorize import can_colorize
+
+        colorize = hasattr(self, "stream") and can_colorize(file=self.stream)
+        msgLines = list(tb_e.format(colorize=colorize))
+
+        if self.buffer:
+            output = sys.stdout.getvalue()
+            error = sys.stderr.getvalue()
+            if output:
+                if not output.endswith('\n'):
+                    output += '\n'
+                msgLines.append(STDOUT_LINE % output)
+            if error:
+                if not error.endswith('\n'):
+                    error += '\n'
+                msgLines.append(STDERR_LINE % error)
+        return ''.join(msgLines)
+
+    def _clean_tracebacks(self, exctype, value, tb, test):
+        ret = None
+        first = True
+        excs = [(exctype, value, tb)]
+        seen = {id(value)}  # Detect loops in chained exceptions.
+        while excs:
+            (exctype, value, tb) = excs.pop()
+            # Skip test runner traceback levels
+            while tb and self._is_relevant_tb_level(tb):
+                tb = tb.tb_next
+
+            # Skip assert*() traceback levels
+            if exctype is test.failureException:
+                self._remove_unittest_tb_frames(tb)
+
+            if first:
+                ret = tb
+                first = False
+            else:
+                value.__traceback__ = tb
+
+            if value is not None:
+                for c in (value.__cause__, value.__context__):
+                    if c is not None and id(c) not in seen:
+                        excs.append((type(c), c, c.__traceback__))
+                        seen.add(id(c))
+        return ret
+
+    def _is_relevant_tb_level(self, tb):
+        return '__unittest' in tb.tb_frame.f_globals
+
+    def _remove_unittest_tb_frames(self, tb):
+        '''Truncates usercode tb at the first unittest frame.
+
+        If the first frame of the traceback is in user code,
+        the prefix up to the first unittest frame is returned.
+        If the first frame is already in the unittest module,
+        the traceback is not modified.
+        '''
+        prev = None
+        while tb and not self._is_relevant_tb_level(tb):
+            prev = tb
+            tb = tb.tb_next
+        if prev is not None:
+            prev.tb_next = None
+
+    def __repr__(self):
+        return ("<%s run=%i errors=%i failures=%i>" %
+               (util.strclass(self.__class__), self.testsRun, len(self.errors),
+                len(self.failures)))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/runner.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/runner.py
new file mode 100644
index 0000000000000000000000000000000000000000..5f22d91aebd05f44ec1b9c2f1321bda0ec237c93
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/runner.py
@@ -0,0 +1,313 @@
+"""Running tests"""
+
+import sys
+import time
+import warnings
+
+from _colorize import get_theme
+
+from . import result
+from .case import _SubTest
+from .signals import registerResult
+
+__unittest = True
+
+
+class _WritelnDecorator(object):
+    """Used to decorate file-like objects with a handy 'writeln' method"""
+    def __init__(self, stream):
+        self.stream = stream
+
+    def __getattr__(self, attr):
+        if attr in ('stream', '__getstate__'):
+            raise AttributeError(attr)
+        return getattr(self.stream, attr)
+
+    def writeln(self, arg=None):
+        if arg:
+            self.write(arg)
+        self.write('\n')  # text-mode streams translate to \r\n if needed
+
+
+class TextTestResult(result.TestResult):
+    """A test result class that can print formatted text results to a stream.
+
+    Used by TextTestRunner.
+    """
+    separator1 = '=' * 70
+    separator2 = '-' * 70
+
+    def __init__(self, stream, descriptions, verbosity, *, durations=None):
+        """Construct a TextTestResult. Subclasses should accept **kwargs
+        to ensure compatibility as the interface changes."""
+        super(TextTestResult, self).__init__(stream, descriptions, verbosity)
+        self.stream = stream
+        self.showAll = verbosity > 1
+        self.dots = verbosity == 1
+        self.descriptions = descriptions
+        self._theme = get_theme(tty_file=stream).unittest
+        self._newline = True
+        self.durations = durations
+
+    def getDescription(self, test):
+        doc_first_line = test.shortDescription()
+        if self.descriptions and doc_first_line:
+            return '\n'.join((str(test), doc_first_line))
+        else:
+            return str(test)
+
+    def startTest(self, test):
+        super(TextTestResult, self).startTest(test)
+        if self.showAll:
+            self.stream.write(self.getDescription(test))
+            self.stream.write(" ... ")
+            self.stream.flush()
+            self._newline = False
+
+    def _write_status(self, test, status):
+        is_subtest = isinstance(test, _SubTest)
+        if is_subtest or self._newline:
+            if not self._newline:
+                self.stream.writeln()
+            if is_subtest:
+                self.stream.write("  ")
+            self.stream.write(self.getDescription(test))
+            self.stream.write(" ... ")
+        self.stream.writeln(status)
+        self.stream.flush()
+        self._newline = True
+
+    def addSubTest(self, test, subtest, err):
+        if err is not None:
+            t = self._theme
+            if self.showAll:
+                if issubclass(err[0], subtest.failureException):
+                    self._write_status(subtest, f"{t.fail}FAIL{t.reset}")
+                else:
+                    self._write_status(subtest, f"{t.fail}ERROR{t.reset}")
+            elif self.dots:
+                if issubclass(err[0], subtest.failureException):
+                    self.stream.write(f"{t.fail}F{t.reset}")
+                else:
+                    self.stream.write(f"{t.fail}E{t.reset}")
+                self.stream.flush()
+        super(TextTestResult, self).addSubTest(test, subtest, err)
+
+    def addSuccess(self, test):
+        super(TextTestResult, self).addSuccess(test)
+        t = self._theme
+        if self.showAll:
+            self._write_status(test, f"{t.passed}ok{t.reset}")
+        elif self.dots:
+            self.stream.write(f"{t.passed}.{t.reset}")
+            self.stream.flush()
+
+    def addError(self, test, err):
+        super(TextTestResult, self).addError(test, err)
+        t = self._theme
+        if self.showAll:
+            self._write_status(test, f"{t.fail}ERROR{t.reset}")
+        elif self.dots:
+            self.stream.write(f"{t.fail}E{t.reset}")
+            self.stream.flush()
+
+    def addFailure(self, test, err):
+        super(TextTestResult, self).addFailure(test, err)
+        t = self._theme
+        if self.showAll:
+            self._write_status(test, f"{t.fail}FAIL{t.reset}")
+        elif self.dots:
+            self.stream.write(f"{t.fail}F{t.reset}")
+            self.stream.flush()
+
+    def addSkip(self, test, reason):
+        super(TextTestResult, self).addSkip(test, reason)
+        t = self._theme
+        if self.showAll:
+            self._write_status(test, f"{t.warn}skipped{t.reset} {reason!r}")
+        elif self.dots:
+            self.stream.write(f"{t.warn}s{t.reset}")
+            self.stream.flush()
+
+    def addExpectedFailure(self, test, err):
+        super(TextTestResult, self).addExpectedFailure(test, err)
+        t = self._theme
+        if self.showAll:
+            self.stream.writeln(f"{t.warn}expected failure{t.reset}")
+            self.stream.flush()
+        elif self.dots:
+            self.stream.write(f"{t.warn}x{t.reset}")
+            self.stream.flush()
+
+    def addUnexpectedSuccess(self, test):
+        super(TextTestResult, self).addUnexpectedSuccess(test)
+        t = self._theme
+        if self.showAll:
+            self.stream.writeln(f"{t.fail}unexpected success{t.reset}")
+            self.stream.flush()
+        elif self.dots:
+            self.stream.write(f"{t.fail}u{t.reset}")
+            self.stream.flush()
+
+    def printErrors(self):
+        t = self._theme
+        if self.dots or self.showAll:
+            self.stream.writeln()
+            self.stream.flush()
+        self.printErrorList(f"{t.fail}ERROR{t.reset}", self.errors)
+        self.printErrorList(f"{t.fail}FAIL{t.reset}", self.failures)
+        unexpectedSuccesses = getattr(self, "unexpectedSuccesses", ())
+        if unexpectedSuccesses:
+            self.stream.writeln(self.separator1)
+            for test in unexpectedSuccesses:
+                self.stream.writeln(
+                    f"{t.fail}UNEXPECTED SUCCESS{t.fail_info}: "
+                    f"{self.getDescription(test)}{t.reset}"
+                )
+            self.stream.flush()
+
+    def printErrorList(self, flavour, errors):
+        t = self._theme
+        for test, err in errors:
+            self.stream.writeln(self.separator1)
+            self.stream.writeln(
+                f"{flavour}{t.fail_info}: {self.getDescription(test)}{t.reset}"
+            )
+            self.stream.writeln(self.separator2)
+            self.stream.writeln("%s" % err)
+            self.stream.flush()
+
+
+class TextTestRunner(object):
+    """A test runner class that displays results in textual form.
+
+    It prints out the names of tests as they are run, errors as they
+    occur, and a summary of the results at the end of the test run.
+    """
+    resultclass = TextTestResult
+
+    def __init__(self, stream=None, descriptions=True, verbosity=1,
+                 failfast=False, buffer=False, resultclass=None, warnings=None,
+                 *, tb_locals=False, durations=None):
+        """Construct a TextTestRunner.
+
+        Subclasses should accept **kwargs to ensure compatibility as the
+        interface changes.
+        """
+        if stream is None:
+            stream = sys.stderr
+        self.stream = _WritelnDecorator(stream)
+        self.descriptions = descriptions
+        self.verbosity = verbosity
+        self.failfast = failfast
+        self.buffer = buffer
+        self.tb_locals = tb_locals
+        self.durations = durations
+        self.warnings = warnings
+        if resultclass is not None:
+            self.resultclass = resultclass
+
+    def _makeResult(self):
+        try:
+            return self.resultclass(self.stream, self.descriptions,
+                                    self.verbosity, durations=self.durations)
+        except TypeError:
+            # didn't accept the durations argument
+            return self.resultclass(self.stream, self.descriptions,
+                                    self.verbosity)
+
+    def _printDurations(self, result):
+        if not result.collectedDurations:
+            return
+        ls = sorted(result.collectedDurations, key=lambda x: x[1],
+                    reverse=True)
+        if self.durations > 0:
+            ls = ls[:self.durations]
+        self.stream.writeln("Slowest test durations")
+        if hasattr(result, 'separator2'):
+            self.stream.writeln(result.separator2)
+        hidden = False
+        for test, elapsed in ls:
+            if self.verbosity < 2 and elapsed < 0.001:
+                hidden = True
+                continue
+            self.stream.writeln("%-10s %s" % ("%.3fs" % elapsed, test))
+        if hidden:
+            self.stream.writeln("\n(durations < 0.001s were hidden; "
+                                "use -v to show these durations)")
+        else:
+            self.stream.writeln("")
+
+    def run(self, test):
+        "Run the given test case or test suite."
+        result = self._makeResult()
+        registerResult(result)
+        result.failfast = self.failfast
+        result.buffer = self.buffer
+        result.tb_locals = self.tb_locals
+        with warnings.catch_warnings():
+            if self.warnings:
+                # if self.warnings is set, use it to filter all the warnings
+                warnings.simplefilter(self.warnings)
+            start_time = time.perf_counter()
+            startTestRun = getattr(result, 'startTestRun', None)
+            if startTestRun is not None:
+                startTestRun()
+            try:
+                test(result)
+            finally:
+                stopTestRun = getattr(result, 'stopTestRun', None)
+                if stopTestRun is not None:
+                    stopTestRun()
+            stop_time = time.perf_counter()
+        time_taken = stop_time - start_time
+        result.printErrors()
+        if self.durations is not None:
+            self._printDurations(result)
+
+        if hasattr(result, 'separator2'):
+            self.stream.writeln(result.separator2)
+
+        run = result.testsRun
+        self.stream.writeln("Ran %d test%s in %.3fs" %
+                            (run, run != 1 and "s" or "", time_taken))
+        self.stream.writeln()
+
+        expected_fails = unexpected_successes = skipped = 0
+        try:
+            results = map(len, (result.expectedFailures,
+                                result.unexpectedSuccesses,
+                                result.skipped))
+        except AttributeError:
+            pass
+        else:
+            expected_fails, unexpected_successes, skipped = results
+
+        infos = []
+        t = get_theme(tty_file=self.stream).unittest
+
+        if not result.wasSuccessful():
+            self.stream.write(f"{t.fail_info}FAILED{t.reset}")
+            failed, errored = len(result.failures), len(result.errors)
+            if failed:
+                infos.append(f"{t.fail_info}failures={failed}{t.reset}")
+            if errored:
+                infos.append(f"{t.fail_info}errors={errored}{t.reset}")
+        elif run == 0 and not skipped:
+            self.stream.write(f"{t.warn}NO TESTS RAN{t.reset}")
+        else:
+            self.stream.write(f"{t.passed}OK{t.reset}")
+        if skipped:
+            infos.append(f"{t.warn}skipped={skipped}{t.reset}")
+        if expected_fails:
+            infos.append(f"{t.warn}expected failures={expected_fails}{t.reset}")
+        if unexpected_successes:
+            infos.append(
+                f"{t.fail}unexpected successes={unexpected_successes}{t.reset}"
+            )
+        if infos:
+            self.stream.writeln(" (%s)" % (", ".join(infos),))
+        else:
+            self.stream.write("\n")
+        self.stream.flush()
+        return result
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/signals.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/signals.py
new file mode 100644
index 0000000000000000000000000000000000000000..e6a5fc524397121e170bd5a888957374b91ba946
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/signals.py
@@ -0,0 +1,71 @@
+import signal
+import weakref
+
+from functools import wraps
+
+__unittest = True
+
+
+class _InterruptHandler(object):
+    def __init__(self, default_handler):
+        self.called = False
+        self.original_handler = default_handler
+        if isinstance(default_handler, int):
+            if default_handler == signal.SIG_DFL:
+                # Pretend it's signal.default_int_handler instead.
+                default_handler = signal.default_int_handler
+            elif default_handler == signal.SIG_IGN:
+                # Not quite the same thing as SIG_IGN, but the closest we
+                # can make it: do nothing.
+                def default_handler(unused_signum, unused_frame):
+                    pass
+            else:
+                raise TypeError("expected SIGINT signal handler to be "
+                                "signal.SIG_IGN, signal.SIG_DFL, or a "
+                                "callable object")
+        self.default_handler = default_handler
+
+    def __call__(self, signum, frame):
+        installed_handler = signal.getsignal(signal.SIGINT)
+        if installed_handler is not self:
+            # if we aren't the installed handler, then delegate immediately
+            # to the default handler
+            self.default_handler(signum, frame)
+
+        if self.called:
+            self.default_handler(signum, frame)
+        self.called = True
+        for result in _results.keys():
+            result.stop()
+
+_results = weakref.WeakKeyDictionary()
+def registerResult(result):
+    _results[result] = 1
+
+def removeResult(result):
+    return bool(_results.pop(result, None))
+
+_interrupt_handler = None
+def installHandler():
+    global _interrupt_handler
+    if _interrupt_handler is None:
+        default_handler = signal.getsignal(signal.SIGINT)
+        _interrupt_handler = _InterruptHandler(default_handler)
+        signal.signal(signal.SIGINT, _interrupt_handler)
+
+
+def removeHandler(method=None):
+    if method is not None:
+        @wraps(method)
+        def inner(*args, **kwargs):
+            initial = signal.getsignal(signal.SIGINT)
+            removeHandler()
+            try:
+                return method(*args, **kwargs)
+            finally:
+                signal.signal(signal.SIGINT, initial)
+        return inner
+
+    global _interrupt_handler
+    if _interrupt_handler is not None:
+        signal.signal(signal.SIGINT, _interrupt_handler.original_handler)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/suite.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/suite.py
new file mode 100644
index 0000000000000000000000000000000000000000..6f45b6fe5f6039b94725b732e18eab5c01f4494b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/suite.py
@@ -0,0 +1,379 @@
+"""TestSuite"""
+
+import sys
+
+from . import case
+from . import util
+
+__unittest = True
+
+
+def _call_if_exists(parent, attr):
+    func = getattr(parent, attr, lambda: None)
+    func()
+
+
+class BaseTestSuite(object):
+    """A simple test suite that doesn't provide class or module shared fixtures.
+    """
+    _cleanup = True
+
+    def __init__(self, tests=()):
+        self._tests = []
+        self._removed_tests = 0
+        self.addTests(tests)
+
+    def __repr__(self):
+        return "<%s tests=%s>" % (util.strclass(self.__class__), list(self))
+
+    def __eq__(self, other):
+        if not isinstance(other, self.__class__):
+            return NotImplemented
+        return list(self) == list(other)
+
+    def __iter__(self):
+        return iter(self._tests)
+
+    def countTestCases(self):
+        cases = self._removed_tests
+        for test in self:
+            if test:
+                cases += test.countTestCases()
+        return cases
+
+    def addTest(self, test):
+        # sanity checks
+        if not callable(test):
+            raise TypeError("{} is not callable".format(repr(test)))
+        if isinstance(test, type) and issubclass(test,
+                                                 (case.TestCase, TestSuite)):
+            raise TypeError("TestCases and TestSuites must be instantiated "
+                            "before passing them to addTest()")
+        self._tests.append(test)
+
+    def addTests(self, tests):
+        if isinstance(tests, str):
+            raise TypeError("tests must be an iterable of tests, not a string")
+        for test in tests:
+            self.addTest(test)
+
+    def run(self, result):
+        for index, test in enumerate(self):
+            if result.shouldStop:
+                break
+            test(result)
+            if self._cleanup:
+                self._removeTestAtIndex(index)
+        return result
+
+    def _removeTestAtIndex(self, index):
+        """Stop holding a reference to the TestCase at index."""
+        try:
+            test = self._tests[index]
+        except TypeError:
+            # support for suite implementations that have overridden self._tests
+            pass
+        else:
+            # Some unittest tests add non TestCase/TestSuite objects to
+            # the suite.
+            if hasattr(test, 'countTestCases'):
+                self._removed_tests += test.countTestCases()
+            self._tests[index] = None
+
+    def __call__(self, *args, **kwds):
+        return self.run(*args, **kwds)
+
+    def debug(self):
+        """Run the tests without collecting errors in a TestResult"""
+        for test in self:
+            test.debug()
+
+
+class TestSuite(BaseTestSuite):
+    """A test suite is a composite test consisting of a number of TestCases.
+
+    For use, create an instance of TestSuite, then add test case instances.
+    When all tests have been added, the suite can be passed to a test
+    runner, such as TextTestRunner. It will run the individual test cases
+    in the order in which they were added, aggregating the results. When
+    subclassing, do not forget to call the base class constructor.
+    """
+
+    def run(self, result, debug=False):
+        topLevel = False
+        if getattr(result, '_testRunEntered', False) is False:
+            result._testRunEntered = topLevel = True
+
+        for index, test in enumerate(self):
+            if result.shouldStop:
+                break
+
+            if _isnotsuite(test):
+                self._tearDownPreviousClass(test, result)
+                self._handleModuleFixture(test, result)
+                self._handleClassSetUp(test, result)
+                result._previousTestClass = test.__class__
+
+                if (getattr(test.__class__, '_classSetupFailed', False) or
+                    getattr(result, '_moduleSetUpFailed', False)):
+                    continue
+
+            if not debug:
+                test(result)
+            else:
+                test.debug()
+
+            if self._cleanup:
+                self._removeTestAtIndex(index)
+
+        if topLevel:
+            self._tearDownPreviousClass(None, result)
+            self._handleModuleTearDown(result)
+            result._testRunEntered = False
+        return result
+
+    def debug(self):
+        """Run the tests without collecting errors in a TestResult"""
+        debug = _DebugResult()
+        self.run(debug, True)
+
+    ################################
+
+    def _handleClassSetUp(self, test, result):
+        previousClass = getattr(result, '_previousTestClass', None)
+        currentClass = test.__class__
+        if currentClass == previousClass:
+            return
+        if result._moduleSetUpFailed:
+            return
+        if getattr(currentClass, "__unittest_skip__", False):
+            return
+
+        failed = False
+        try:
+            currentClass._classSetupFailed = False
+        except TypeError:
+            # test may actually be a function
+            # so its class will be a builtin-type
+            pass
+
+        setUpClass = getattr(currentClass, 'setUpClass', None)
+        doClassCleanups = getattr(currentClass, 'doClassCleanups', None)
+        if setUpClass is not None:
+            _call_if_exists(result, '_setupStdout')
+            try:
+                try:
+                    setUpClass()
+                except Exception as e:
+                    if isinstance(result, _DebugResult):
+                        raise
+                    failed = True
+                    try:
+                        currentClass._classSetupFailed = True
+                    except TypeError:
+                        pass
+                    className = util.strclass(currentClass)
+                    self._createClassOrModuleLevelException(result, e,
+                                                            'setUpClass',
+                                                            className)
+                if failed and doClassCleanups is not None:
+                    doClassCleanups()
+                    for exc_info in currentClass.tearDown_exceptions:
+                        self._createClassOrModuleLevelException(
+                                result, exc_info[1], 'setUpClass', className,
+                                info=exc_info)
+            finally:
+                _call_if_exists(result, '_restoreStdout')
+
+    def _get_previous_module(self, result):
+        previousModule = None
+        previousClass = getattr(result, '_previousTestClass', None)
+        if previousClass is not None:
+            previousModule = previousClass.__module__
+        return previousModule
+
+
+    def _handleModuleFixture(self, test, result):
+        previousModule = self._get_previous_module(result)
+        currentModule = test.__class__.__module__
+        if currentModule == previousModule:
+            return
+
+        self._handleModuleTearDown(result)
+
+
+        result._moduleSetUpFailed = False
+        try:
+            module = sys.modules[currentModule]
+        except KeyError:
+            return
+        setUpModule = getattr(module, 'setUpModule', None)
+        if setUpModule is not None:
+            _call_if_exists(result, '_setupStdout')
+            try:
+                try:
+                    setUpModule()
+                except Exception as e:
+                    if isinstance(result, _DebugResult):
+                        raise
+                    result._moduleSetUpFailed = True
+                    self._createClassOrModuleLevelException(result, e,
+                                                            'setUpModule',
+                                                            currentModule)
+                if result._moduleSetUpFailed:
+                    try:
+                        case.doModuleCleanups()
+                    except Exception as e:
+                        self._createClassOrModuleLevelException(result, e,
+                                                                'setUpModule',
+                                                                currentModule)
+            finally:
+                _call_if_exists(result, '_restoreStdout')
+
+    def _createClassOrModuleLevelException(self, result, exc, method_name,
+                                           parent, info=None):
+        errorName = f'{method_name} ({parent})'
+        self._addClassOrModuleLevelException(result, exc, errorName, info)
+
+    def _addClassOrModuleLevelException(self, result, exception, errorName,
+                                        info=None):
+        error = _ErrorHolder(errorName)
+        addSkip = getattr(result, 'addSkip', None)
+        if addSkip is not None and isinstance(exception, case.SkipTest):
+            addSkip(error, str(exception))
+        else:
+            if not info:
+                result.addError(error, sys.exc_info())
+            else:
+                result.addError(error, info)
+
+    def _handleModuleTearDown(self, result):
+        previousModule = self._get_previous_module(result)
+        if previousModule is None:
+            return
+        if result._moduleSetUpFailed:
+            return
+
+        try:
+            module = sys.modules[previousModule]
+        except KeyError:
+            return
+
+        _call_if_exists(result, '_setupStdout')
+        try:
+            tearDownModule = getattr(module, 'tearDownModule', None)
+            if tearDownModule is not None:
+                try:
+                    tearDownModule()
+                except Exception as e:
+                    if isinstance(result, _DebugResult):
+                        raise
+                    self._createClassOrModuleLevelException(result, e,
+                                                            'tearDownModule',
+                                                            previousModule)
+            try:
+                case.doModuleCleanups()
+            except Exception as e:
+                if isinstance(result, _DebugResult):
+                    raise
+                self._createClassOrModuleLevelException(result, e,
+                                                        'tearDownModule',
+                                                        previousModule)
+        finally:
+            _call_if_exists(result, '_restoreStdout')
+
+    def _tearDownPreviousClass(self, test, result):
+        previousClass = getattr(result, '_previousTestClass', None)
+        currentClass = test.__class__
+        if currentClass == previousClass or previousClass is None:
+            return
+        if getattr(previousClass, '_classSetupFailed', False):
+            return
+        if getattr(result, '_moduleSetUpFailed', False):
+            return
+        if getattr(previousClass, "__unittest_skip__", False):
+            return
+
+        tearDownClass = getattr(previousClass, 'tearDownClass', None)
+        doClassCleanups = getattr(previousClass, 'doClassCleanups', None)
+        if tearDownClass is None and doClassCleanups is None:
+            return
+
+        _call_if_exists(result, '_setupStdout')
+        try:
+            if tearDownClass is not None:
+                try:
+                    tearDownClass()
+                except Exception as e:
+                    if isinstance(result, _DebugResult):
+                        raise
+                    className = util.strclass(previousClass)
+                    self._createClassOrModuleLevelException(result, e,
+                                                            'tearDownClass',
+                                                            className)
+            if doClassCleanups is not None:
+                doClassCleanups()
+                for exc_info in previousClass.tearDown_exceptions:
+                    if isinstance(result, _DebugResult):
+                        raise exc_info[1]
+                    className = util.strclass(previousClass)
+                    self._createClassOrModuleLevelException(result, exc_info[1],
+                                                            'tearDownClass',
+                                                            className,
+                                                            info=exc_info)
+        finally:
+            _call_if_exists(result, '_restoreStdout')
+
+
+class _ErrorHolder(object):
+    """
+    Placeholder for a TestCase inside a result. As far as a TestResult
+    is concerned, this looks exactly like a unit test. Used to insert
+    arbitrary errors into a test suite run.
+    """
+    # Inspired by the ErrorHolder from Twisted:
+    # http://twistedmatrix.com/trac/browser/trunk/twisted/trial/runner.py
+
+    # attribute used by TestResult._exc_info_to_string
+    failureException = None
+
+    def __init__(self, description):
+        self.description = description
+
+    def id(self):
+        return self.description
+
+    def shortDescription(self):
+        return None
+
+    def __repr__(self):
+        return "<ErrorHolder description=%r>" % (self.description,)
+
+    def __str__(self):
+        return self.id()
+
+    def run(self, result):
+        # could call result.addError(...) - but this test-like object
+        # shouldn't be run anyway
+        pass
+
+    def __call__(self, result):
+        return self.run(result)
+
+    def countTestCases(self):
+        return 0
+
+def _isnotsuite(test):
+    "A crude way to tell apart testcases and suites with duck-typing"
+    try:
+        iter(test)
+    except TypeError:
+        return True
+    return False
+
+
+class _DebugResult(object):
+    "Used by the TestSuite to hold previous class when running in debug."
+    _previousTestClass = None
+    _moduleSetUpFailed = False
+    shouldStop = False
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..050eaed0b3f58fb09d1797f81c19de44110c511e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/unittest/util.py
@@ -0,0 +1,170 @@
+"""Various utility functions."""
+
+from collections import namedtuple, Counter
+from os.path import commonprefix
+
+__unittest = True
+
+_MAX_LENGTH = 80
+_PLACEHOLDER_LEN = 12
+_MIN_BEGIN_LEN = 5
+_MIN_END_LEN = 5
+_MIN_COMMON_LEN = 5
+_MIN_DIFF_LEN = _MAX_LENGTH - \
+               (_MIN_BEGIN_LEN + _PLACEHOLDER_LEN + _MIN_COMMON_LEN +
+                _PLACEHOLDER_LEN + _MIN_END_LEN)
+assert _MIN_DIFF_LEN >= 0
+
+def _shorten(s, prefixlen, suffixlen):
+    skip = len(s) - prefixlen - suffixlen
+    if skip > _PLACEHOLDER_LEN:
+        s = '%s[%d chars]%s' % (s[:prefixlen], skip, s[len(s) - suffixlen:])
+    return s
+
+def _common_shorten_repr(*args):
+    args = tuple(map(safe_repr, args))
+    maxlen = max(map(len, args))
+    if maxlen <= _MAX_LENGTH:
+        return args
+
+    prefix = commonprefix(args)
+    prefixlen = len(prefix)
+
+    common_len = _MAX_LENGTH - \
+                 (maxlen - prefixlen + _MIN_BEGIN_LEN + _PLACEHOLDER_LEN)
+    if common_len > _MIN_COMMON_LEN:
+        assert _MIN_BEGIN_LEN + _PLACEHOLDER_LEN + _MIN_COMMON_LEN + \
+               (maxlen - prefixlen) < _MAX_LENGTH
+        prefix = _shorten(prefix, _MIN_BEGIN_LEN, common_len)
+        return tuple(prefix + s[prefixlen:] for s in args)
+
+    prefix = _shorten(prefix, _MIN_BEGIN_LEN, _MIN_COMMON_LEN)
+    return tuple(prefix + _shorten(s[prefixlen:], _MIN_DIFF_LEN, _MIN_END_LEN)
+                 for s in args)
+
+def safe_repr(obj, short=False):
+    try:
+        result = repr(obj)
+    except Exception:
+        result = object.__repr__(obj)
+    if not short or len(result) < _MAX_LENGTH:
+        return result
+    return result[:_MAX_LENGTH] + ' [truncated]...'
+
+def strclass(cls):
+    return "%s.%s" % (cls.__module__, cls.__qualname__)
+
+def sorted_list_difference(expected, actual):
+    """Finds elements in only one or the other of two, sorted input lists.
+
+    Returns a two-element tuple of lists.    The first list contains those
+    elements in the "expected" list but not in the "actual" list, and the
+    second contains those elements in the "actual" list but not in the
+    "expected" list.    Duplicate elements in either input list are ignored.
+    """
+    i = j = 0
+    missing = []
+    unexpected = []
+    while True:
+        try:
+            e = expected[i]
+            a = actual[j]
+            if e < a:
+                missing.append(e)
+                i += 1
+                while expected[i] == e:
+                    i += 1
+            elif e > a:
+                unexpected.append(a)
+                j += 1
+                while actual[j] == a:
+                    j += 1
+            else:
+                i += 1
+                try:
+                    while expected[i] == e:
+                        i += 1
+                finally:
+                    j += 1
+                    while actual[j] == a:
+                        j += 1
+        except IndexError:
+            missing.extend(expected[i:])
+            unexpected.extend(actual[j:])
+            break
+    return missing, unexpected
+
+
+def unorderable_list_difference(expected, actual):
+    """Same behavior as sorted_list_difference but
+    for lists of unorderable items (like dicts).
+
+    As it does a linear search per item (remove) it
+    has O(n*n) performance."""
+    missing = []
+    while expected:
+        item = expected.pop()
+        try:
+            actual.remove(item)
+        except ValueError:
+            missing.append(item)
+
+    # anything left in actual is unexpected
+    return missing, actual
+
+def three_way_cmp(x, y):
+    """Return -1 if x < y, 0 if x == y and 1 if x > y"""
+    return (x > y) - (x < y)
+
+_Mismatch = namedtuple('Mismatch', 'actual expected value')
+
+def _count_diff_all_purpose(actual, expected):
+    'Returns list of (cnt_act, cnt_exp, elem) triples where the counts differ'
+    # elements need not be hashable
+    s, t = list(actual), list(expected)
+    m, n = len(s), len(t)
+    NULL = object()
+    result = []
+    for i, elem in enumerate(s):
+        if elem is NULL:
+            continue
+        cnt_s = cnt_t = 0
+        for j in range(i, m):
+            if s[j] == elem:
+                cnt_s += 1
+                s[j] = NULL
+        for j, other_elem in enumerate(t):
+            if other_elem == elem:
+                cnt_t += 1
+                t[j] = NULL
+        if cnt_s != cnt_t:
+            diff = _Mismatch(cnt_s, cnt_t, elem)
+            result.append(diff)
+
+    for i, elem in enumerate(t):
+        if elem is NULL:
+            continue
+        cnt_t = 0
+        for j in range(i, n):
+            if t[j] == elem:
+                cnt_t += 1
+                t[j] = NULL
+        diff = _Mismatch(0, cnt_t, elem)
+        result.append(diff)
+    return result
+
+def _count_diff_hashable(actual, expected):
+    'Returns list of (cnt_act, cnt_exp, elem) triples where the counts differ'
+    # elements must be hashable
+    s, t = Counter(actual), Counter(expected)
+    result = []
+    for elem, cnt_s in s.items():
+        cnt_t = t.get(elem, 0)
+        if cnt_s != cnt_t:
+            diff = _Mismatch(cnt_s, cnt_t, elem)
+            result.append(diff)
+    for elem, cnt_t in t.items():
+        if elem not in s:
+            diff = _Mismatch(0, cnt_t, elem)
+            result.append(diff)
+    return result
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/error.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/error.py
new file mode 100644
index 0000000000000000000000000000000000000000..a9cd1ecadd63f2b09ee4363fc283e8f1f5cbbb3b
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/error.py
@@ -0,0 +1,74 @@
+"""Exception classes raised by urllib.
+
+The base exception class is URLError, which inherits from OSError.  It
+doesn't define any behavior of its own, but is the base class for all
+exceptions defined in this package.
+
+HTTPError is an exception class that is also a valid HTTP response
+instance.  It behaves this way because HTTP protocol errors are valid
+responses, with a status code, headers, and a body.  In some contexts,
+an application may want to handle an exception like a regular
+response.
+"""
+import io
+import urllib.response
+
+__all__ = ['URLError', 'HTTPError', 'ContentTooShortError']
+
+
+class URLError(OSError):
+    # URLError is a sub-type of OSError, but it doesn't share any of
+    # the implementation.  need to override __init__ and __str__.
+    # It sets self.args for compatibility with other OSError
+    # subclasses, but args doesn't have the typical format with errno in
+    # slot 0 and strerror in slot 1.  This may be better than nothing.
+    def __init__(self, reason, filename=None):
+        self.args = reason,
+        self.reason = reason
+        if filename is not None:
+            self.filename = filename
+
+    def __str__(self):
+        return '<urlopen error %s>' % self.reason
+
+
+class HTTPError(URLError, urllib.response.addinfourl):
+    """Raised when HTTP error occurs, but also acts like non-error return"""
+    __super_init = urllib.response.addinfourl.__init__
+
+    def __init__(self, url, code, msg, hdrs, fp):
+        self.code = code
+        self.msg = msg
+        self.hdrs = hdrs
+        self.fp = fp
+        self.filename = url
+        if fp is None:
+            fp = io.BytesIO()
+        self.__super_init(fp, hdrs, url, code)
+
+    def __str__(self):
+        return 'HTTP Error %s: %s' % (self.code, self.msg)
+
+    def __repr__(self):
+        return '<HTTPError %s: %r>' % (self.code, self.msg)
+
+    # since URLError specifies a .reason attribute, HTTPError should also
+    #  provide this attribute. See issue13211 for discussion.
+    @property
+    def reason(self):
+        return self.msg
+
+    @property
+    def headers(self):
+        return self.hdrs
+
+    @headers.setter
+    def headers(self, headers):
+        self.hdrs = headers
+
+
+class ContentTooShortError(URLError):
+    """Exception raised when downloaded size does not match content-length."""
+    def __init__(self, message, content):
+        URLError.__init__(self, message)
+        self.content = content
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/parse.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/parse.py
new file mode 100644
index 0000000000000000000000000000000000000000..a651e815ddc84e06f1c8867a9a7871da3c3cb1d7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/parse.py
@@ -0,0 +1,1289 @@
+"""Parse (absolute and relative) URLs.
+
+urllib.parse module is based upon the following RFC specifications.
+
+RFC 3986 (STD66): "Uniform Resource Identifiers" by T. Berners-Lee, R. Fielding
+and L.  Masinter, January 2005.
+
+RFC 2732 : "Format for Literal IPv6 Addresses in URL's by R.Hinden, B.Carpenter
+and L.Masinter, December 1999.
+
+RFC 2396:  "Uniform Resource Identifiers (URI)": Generic Syntax by T.
+Berners-Lee, R. Fielding, and L. Masinter, August 1998.
+
+RFC 2368: "The mailto URL scheme", by P.Hoffman , L Masinter, J. Zawinski, July 1998.
+
+RFC 1808: "Relative Uniform Resource Locators", by R. Fielding, UC Irvine, June
+1995.
+
+RFC 1738: "Uniform Resource Locators (URL)" by T. Berners-Lee, L. Masinter, M.
+McCahill, December 1994
+
+RFC 3986 is considered the current standard and any future changes to
+urllib.parse module should conform with it.  The urllib.parse module is
+currently not entirely compliant with this RFC due to defacto
+scenarios for parsing, and for backward compatibility purposes, some
+parsing quirks from older RFCs are retained. The testcases in
+test_urlparse.py provides a good indicator of parsing behavior.
+
+The WHATWG URL Parser spec should also be considered.  We are not compliant with
+it either due to existing user code API behavior expectations (Hyrum's Law).
+It serves as a useful guide when making changes.
+"""
+
+from collections import namedtuple
+import functools
+import math
+import re
+import types
+import warnings
+import ipaddress
+
+__all__ = ["urlparse", "urlunparse", "urljoin", "urldefrag",
+           "urlsplit", "urlunsplit", "urlencode", "parse_qs",
+           "parse_qsl", "quote", "quote_plus", "quote_from_bytes",
+           "unquote", "unquote_plus", "unquote_to_bytes",
+           "DefragResult", "ParseResult", "SplitResult",
+           "DefragResultBytes", "ParseResultBytes", "SplitResultBytes"]
+
+# A classification of schemes.
+# The empty string classifies URLs with no scheme specified,
+# being the default value returned by “urlsplit” and “urlparse”.
+
+uses_relative = ['', 'ftp', 'http', 'gopher', 'nntp', 'imap',
+                 'wais', 'file', 'https', 'shttp', 'mms',
+                 'prospero', 'rtsp', 'rtsps', 'rtspu', 'sftp',
+                 'svn', 'svn+ssh', 'ws', 'wss']
+
+uses_netloc = ['', 'ftp', 'http', 'gopher', 'nntp', 'telnet',
+               'imap', 'wais', 'file', 'mms', 'https', 'shttp',
+               'snews', 'prospero', 'rtsp', 'rtsps', 'rtspu', 'rsync',
+               'svn', 'svn+ssh', 'sftp', 'nfs', 'git', 'git+ssh',
+               'ws', 'wss', 'itms-services']
+
+uses_params = ['', 'ftp', 'hdl', 'prospero', 'http', 'imap',
+               'https', 'shttp', 'rtsp', 'rtsps', 'rtspu', 'sip',
+               'sips', 'mms', 'sftp', 'tel']
+
+# These are not actually used anymore, but should stay for backwards
+# compatibility.  (They are undocumented, but have a public-looking name.)
+
+non_hierarchical = ['gopher', 'hdl', 'mailto', 'news',
+                    'telnet', 'wais', 'imap', 'snews', 'sip', 'sips']
+
+uses_query = ['', 'http', 'wais', 'imap', 'https', 'shttp', 'mms',
+              'gopher', 'rtsp', 'rtsps', 'rtspu', 'sip', 'sips']
+
+uses_fragment = ['', 'ftp', 'hdl', 'http', 'gopher', 'news',
+                 'nntp', 'wais', 'https', 'shttp', 'snews',
+                 'file', 'prospero']
+
+# Characters valid in scheme names
+scheme_chars = ('abcdefghijklmnopqrstuvwxyz'
+                'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                '0123456789'
+                '+-.')
+
+# Leading and trailing C0 control and space to be stripped per WHATWG spec.
+# == "".join([chr(i) for i in range(0, 0x20 + 1)])
+_WHATWG_C0_CONTROL_OR_SPACE = '\x00\x01\x02\x03\x04\x05\x06\x07\x08\t\n\x0b\x0c\r\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f '
+
+# Unsafe bytes to be removed per WHATWG spec
+_UNSAFE_URL_BYTES_TO_REMOVE = ['\t', '\r', '\n']
+
+def clear_cache():
+    """Clear internal performance caches. Undocumented; some tests want it."""
+    urlsplit.cache_clear()
+    _byte_quoter_factory.cache_clear()
+
+# Helpers for bytes handling
+# For 3.2, we deliberately require applications that
+# handle improperly quoted URLs to do their own
+# decoding and encoding. If valid use cases are
+# presented, we may relax this by using latin-1
+# decoding internally for 3.3
+_implicit_encoding = 'ascii'
+_implicit_errors = 'strict'
+
+def _noop(obj):
+    return obj
+
+def _encode_result(obj, encoding=_implicit_encoding,
+                        errors=_implicit_errors):
+    return obj.encode(encoding, errors)
+
+def _decode_args(args, encoding=_implicit_encoding,
+                       errors=_implicit_errors):
+    return tuple(x.decode(encoding, errors) if x else '' for x in args)
+
+def _coerce_args(*args):
+    # Invokes decode if necessary to create str args
+    # and returns the coerced inputs along with
+    # an appropriate result coercion function
+    #   - noop for str inputs
+    #   - encoding function otherwise
+    str_input = isinstance(args[0], str)
+    for arg in args[1:]:
+        # We special-case the empty string to support the
+        # "scheme=''" default argument to some functions
+        if arg and isinstance(arg, str) != str_input:
+            raise TypeError("Cannot mix str and non-str arguments")
+    if str_input:
+        return args + (_noop,)
+    return _decode_args(args) + (_encode_result,)
+
+# Result objects are more helpful than simple tuples
+class _ResultMixinStr(object):
+    """Standard approach to encoding parsed results from str to bytes"""
+    __slots__ = ()
+
+    def encode(self, encoding='ascii', errors='strict'):
+        return self._encoded_counterpart(*(x.encode(encoding, errors) for x in self))
+
+
+class _ResultMixinBytes(object):
+    """Standard approach to decoding parsed results from bytes to str"""
+    __slots__ = ()
+
+    def decode(self, encoding='ascii', errors='strict'):
+        return self._decoded_counterpart(*(x.decode(encoding, errors) for x in self))
+
+
+class _NetlocResultMixinBase(object):
+    """Shared methods for the parsed result objects containing a netloc element"""
+    __slots__ = ()
+
+    @property
+    def username(self):
+        return self._userinfo[0]
+
+    @property
+    def password(self):
+        return self._userinfo[1]
+
+    @property
+    def hostname(self):
+        hostname = self._hostinfo[0]
+        if not hostname:
+            return None
+        # Scoped IPv6 address may have zone info, which must not be lowercased
+        # like http://[fe80::822a:a8ff:fe49:470c%tESt]:1234/keys
+        separator = '%' if isinstance(hostname, str) else b'%'
+        hostname, percent, zone = hostname.partition(separator)
+        return hostname.lower() + percent + zone
+
+    @property
+    def port(self):
+        port = self._hostinfo[1]
+        if port is not None:
+            if port.isdigit() and port.isascii():
+                port = int(port)
+            else:
+                raise ValueError(f"Port could not be cast to integer value as {port!r}")
+            if not (0 <= port <= 65535):
+                raise ValueError("Port out of range 0-65535")
+        return port
+
+    __class_getitem__ = classmethod(types.GenericAlias)
+
+
+class _NetlocResultMixinStr(_NetlocResultMixinBase, _ResultMixinStr):
+    __slots__ = ()
+
+    @property
+    def _userinfo(self):
+        netloc = self.netloc
+        userinfo, have_info, hostinfo = netloc.rpartition('@')
+        if have_info:
+            username, have_password, password = userinfo.partition(':')
+            if not have_password:
+                password = None
+        else:
+            username = password = None
+        return username, password
+
+    @property
+    def _hostinfo(self):
+        netloc = self.netloc
+        _, _, hostinfo = netloc.rpartition('@')
+        _, have_open_br, bracketed = hostinfo.partition('[')
+        if have_open_br:
+            hostname, _, port = bracketed.partition(']')
+            _, _, port = port.partition(':')
+        else:
+            hostname, _, port = hostinfo.partition(':')
+        if not port:
+            port = None
+        return hostname, port
+
+
+class _NetlocResultMixinBytes(_NetlocResultMixinBase, _ResultMixinBytes):
+    __slots__ = ()
+
+    @property
+    def _userinfo(self):
+        netloc = self.netloc
+        userinfo, have_info, hostinfo = netloc.rpartition(b'@')
+        if have_info:
+            username, have_password, password = userinfo.partition(b':')
+            if not have_password:
+                password = None
+        else:
+            username = password = None
+        return username, password
+
+    @property
+    def _hostinfo(self):
+        netloc = self.netloc
+        _, _, hostinfo = netloc.rpartition(b'@')
+        _, have_open_br, bracketed = hostinfo.partition(b'[')
+        if have_open_br:
+            hostname, _, port = bracketed.partition(b']')
+            _, _, port = port.partition(b':')
+        else:
+            hostname, _, port = hostinfo.partition(b':')
+        if not port:
+            port = None
+        return hostname, port
+
+
+_DefragResultBase = namedtuple('_DefragResultBase', 'url fragment')
+_SplitResultBase = namedtuple(
+    '_SplitResultBase', 'scheme netloc path query fragment')
+_ParseResultBase = namedtuple(
+    '_ParseResultBase', 'scheme netloc path params query fragment')
+
+_DefragResultBase.__doc__ = """
+DefragResult(url, fragment)
+
+A 2-tuple that contains the url without fragment identifier and the fragment
+identifier as a separate argument.
+"""
+
+_DefragResultBase.url.__doc__ = """The URL with no fragment identifier."""
+
+_DefragResultBase.fragment.__doc__ = """
+Fragment identifier separated from URL, that allows indirect identification of a
+secondary resource by reference to a primary resource and additional identifying
+information.
+"""
+
+_SplitResultBase.__doc__ = """
+SplitResult(scheme, netloc, path, query, fragment)
+
+A 5-tuple that contains the different components of a URL. Similar to
+ParseResult, but does not split params.
+"""
+
+_SplitResultBase.scheme.__doc__ = """Specifies URL scheme for the request."""
+
+_SplitResultBase.netloc.__doc__ = """
+Network location where the request is made to.
+"""
+
+_SplitResultBase.path.__doc__ = """
+The hierarchical path, such as the path to a file to download.
+"""
+
+_SplitResultBase.query.__doc__ = """
+The query component, that contains non-hierarchical data, that along with data
+in path component, identifies a resource in the scope of URI's scheme and
+network location.
+"""
+
+_SplitResultBase.fragment.__doc__ = """
+Fragment identifier, that allows indirect identification of a secondary resource
+by reference to a primary resource and additional identifying information.
+"""
+
+_ParseResultBase.__doc__ = """
+ParseResult(scheme, netloc, path, params, query, fragment)
+
+A 6-tuple that contains components of a parsed URL.
+"""
+
+_ParseResultBase.scheme.__doc__ = _SplitResultBase.scheme.__doc__
+_ParseResultBase.netloc.__doc__ = _SplitResultBase.netloc.__doc__
+_ParseResultBase.path.__doc__ = _SplitResultBase.path.__doc__
+_ParseResultBase.params.__doc__ = """
+Parameters for last path element used to dereference the URI in order to provide
+access to perform some operation on the resource.
+"""
+
+_ParseResultBase.query.__doc__ = _SplitResultBase.query.__doc__
+_ParseResultBase.fragment.__doc__ = _SplitResultBase.fragment.__doc__
+
+
+# For backwards compatibility, alias _NetlocResultMixinStr
+# ResultBase is no longer part of the documented API, but it is
+# retained since deprecating it isn't worth the hassle
+ResultBase = _NetlocResultMixinStr
+
+# Structured result objects for string data
+class DefragResult(_DefragResultBase, _ResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        if self.fragment:
+            return self.url + '#' + self.fragment
+        else:
+            return self.url
+
+class SplitResult(_SplitResultBase, _NetlocResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        return urlunsplit(self)
+
+class ParseResult(_ParseResultBase, _NetlocResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        return urlunparse(self)
+
+# Structured result objects for bytes data
+class DefragResultBytes(_DefragResultBase, _ResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        if self.fragment:
+            return self.url + b'#' + self.fragment
+        else:
+            return self.url
+
+class SplitResultBytes(_SplitResultBase, _NetlocResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        return urlunsplit(self)
+
+class ParseResultBytes(_ParseResultBase, _NetlocResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        return urlunparse(self)
+
+# Set up the encode/decode result pairs
+def _fix_result_transcoding():
+    _result_pairs = (
+        (DefragResult, DefragResultBytes),
+        (SplitResult, SplitResultBytes),
+        (ParseResult, ParseResultBytes),
+    )
+    for _decoded, _encoded in _result_pairs:
+        _decoded._encoded_counterpart = _encoded
+        _encoded._decoded_counterpart = _decoded
+
+_fix_result_transcoding()
+del _fix_result_transcoding
+
+def urlparse(url, scheme='', allow_fragments=True):
+    """Parse a URL into 6 components:
+    <scheme>://<netloc>/<path>;<params>?<query>#<fragment>
+
+    The result is a named 6-tuple with fields corresponding to the
+    above. It is either a ParseResult or ParseResultBytes object,
+    depending on the type of the url parameter.
+
+    The username, password, hostname, and port sub-components of netloc
+    can also be accessed as attributes of the returned object.
+
+    The scheme argument provides the default value of the scheme
+    component when no scheme is found in url.
+
+    If allow_fragments is False, no attempt is made to separate the
+    fragment component from the previous component, which can be either
+    path or query.
+
+    Note that % escapes are not expanded.
+
+    urlsplit() should generally be used instead of urlparse().
+    """
+    url, scheme, _coerce_result = _coerce_args(url, scheme)
+    scheme, netloc, url, params, query, fragment = _urlparse(url, scheme, allow_fragments)
+    result = ParseResult(scheme or '', netloc or '', url, params or '', query or '', fragment or '')
+    return _coerce_result(result)
+
+def _urlparse(url, scheme=None, allow_fragments=True):
+    scheme, netloc, url, query, fragment = _urlsplit(url, scheme, allow_fragments)
+    if (scheme or '') in uses_params and ';' in url:
+        url, params = _splitparams(url, allow_none=True)
+    else:
+        params = None
+    return (scheme, netloc, url, params, query, fragment)
+
+def _splitparams(url, allow_none=False):
+    if '/'  in url:
+        i = url.find(';', url.rfind('/'))
+        if i < 0:
+            return url, None if allow_none else ''
+    else:
+        i = url.find(';')
+    return url[:i], url[i+1:]
+
+def _splitnetloc(url, start=0):
+    delim = len(url)   # position of end of domain part of url, default is end
+    for c in '/?#':    # look for delimiters; the order is NOT important
+        wdelim = url.find(c, start)        # find first of this delim
+        if wdelim >= 0:                    # if found
+            delim = min(delim, wdelim)     # use earliest delim position
+    return url[start:delim], url[delim:]   # return (domain, rest)
+
+def _checknetloc(netloc):
+    if not netloc or netloc.isascii():
+        return
+    # looking for characters like \u2100 that expand to 'a/c'
+    # IDNA uses NFKC equivalence, so normalize for this check
+    import unicodedata
+    n = netloc.replace('@', '')   # ignore characters already included
+    n = n.replace(':', '')        # but not the surrounding text
+    n = n.replace('#', '')
+    n = n.replace('?', '')
+    netloc2 = unicodedata.normalize('NFKC', n)
+    if n == netloc2:
+        return
+    for c in '/?#@:':
+        if c in netloc2:
+            raise ValueError("netloc '" + netloc + "' contains invalid " +
+                             "characters under NFKC normalization")
+
+def _check_bracketed_netloc(netloc):
+    # Note that this function must mirror the splitting
+    # done in NetlocResultMixins._hostinfo().
+    hostname_and_port = netloc.rpartition('@')[2]
+    before_bracket, have_open_br, bracketed = hostname_and_port.partition('[')
+    if have_open_br:
+        # No data is allowed before a bracket.
+        if before_bracket:
+            raise ValueError("Invalid IPv6 URL")
+        hostname, _, port = bracketed.partition(']')
+        # No data is allowed after the bracket but before the port delimiter.
+        if port and not port.startswith(":"):
+            raise ValueError("Invalid IPv6 URL")
+    else:
+        hostname, _, port = hostname_and_port.partition(':')
+    _check_bracketed_host(hostname)
+
+# Valid bracketed hosts are defined in
+# https://www.rfc-editor.org/rfc/rfc3986#page-49 and https://url.spec.whatwg.org/
+def _check_bracketed_host(hostname):
+    if hostname.startswith('v'):
+        if not re.match(r"\Av[a-fA-F0-9]+\..+\z", hostname):
+            raise ValueError(f"IPvFuture address is invalid")
+    else:
+        ip = ipaddress.ip_address(hostname) # Throws Value Error if not IPv6 or IPv4
+        if isinstance(ip, ipaddress.IPv4Address):
+            raise ValueError(f"An IPv4 address cannot be in brackets")
+
+# typed=True avoids BytesWarnings being emitted during cache key
+# comparison since this API supports both bytes and str input.
+@functools.lru_cache(typed=True)
+def urlsplit(url, scheme='', allow_fragments=True):
+    """Parse a URL into 5 components:
+    <scheme>://<netloc>/<path>?<query>#<fragment>
+
+    The result is a named 5-tuple with fields corresponding to the
+    above. It is either a SplitResult or SplitResultBytes object,
+    depending on the type of the url parameter.
+
+    The username, password, hostname, and port sub-components of netloc
+    can also be accessed as attributes of the returned object.
+
+    The scheme argument provides the default value of the scheme
+    component when no scheme is found in url.
+
+    If allow_fragments is False, no attempt is made to separate the
+    fragment component from the previous component, which can be either
+    path or query.
+
+    Note that % escapes are not expanded.
+    """
+
+    url, scheme, _coerce_result = _coerce_args(url, scheme)
+    scheme, netloc, url, query, fragment = _urlsplit(url, scheme, allow_fragments)
+    v = SplitResult(scheme or '', netloc or '', url, query or '', fragment or '')
+    return _coerce_result(v)
+
+def _urlsplit(url, scheme=None, allow_fragments=True):
+    # Only lstrip url as some applications rely on preserving trailing space.
+    # (https://url.spec.whatwg.org/#concept-basic-url-parser would strip both)
+    url = url.lstrip(_WHATWG_C0_CONTROL_OR_SPACE)
+    for b in _UNSAFE_URL_BYTES_TO_REMOVE:
+        url = url.replace(b, "")
+    if scheme is not None:
+        scheme = scheme.strip(_WHATWG_C0_CONTROL_OR_SPACE)
+        for b in _UNSAFE_URL_BYTES_TO_REMOVE:
+            scheme = scheme.replace(b, "")
+
+    allow_fragments = bool(allow_fragments)
+    netloc = query = fragment = None
+    i = url.find(':')
+    if i > 0 and url[0].isascii() and url[0].isalpha():
+        for c in url[:i]:
+            if c not in scheme_chars:
+                break
+        else:
+            scheme, url = url[:i].lower(), url[i+1:]
+    if url[:2] == '//':
+        netloc, url = _splitnetloc(url, 2)
+        if (('[' in netloc and ']' not in netloc) or
+                (']' in netloc and '[' not in netloc)):
+            raise ValueError("Invalid IPv6 URL")
+        if '[' in netloc and ']' in netloc:
+            _check_bracketed_netloc(netloc)
+    if allow_fragments and '#' in url:
+        url, fragment = url.split('#', 1)
+    if '?' in url:
+        url, query = url.split('?', 1)
+    _checknetloc(netloc)
+    return (scheme, netloc, url, query, fragment)
+
+def urlunparse(components):
+    """Put a parsed URL back together again.  This may result in a
+    slightly different, but equivalent URL, if the URL that was parsed
+    originally had redundant delimiters, e.g. a ? with an empty query
+    (the draft states that these are equivalent)."""
+    scheme, netloc, url, params, query, fragment, _coerce_result = (
+                                                  _coerce_args(*components))
+    if not netloc:
+        if scheme and scheme in uses_netloc and (not url or url[:1] == '/'):
+            netloc = ''
+        else:
+            netloc = None
+    if params:
+        url = "%s;%s" % (url, params)
+    return _coerce_result(_urlunsplit(scheme or None, netloc, url,
+                                      query or None, fragment or None))
+
+def urlunsplit(components):
+    """Combine the elements of a tuple as returned by urlsplit() into a
+    complete URL as a string. The data argument can be any five-item iterable.
+    This may result in a slightly different, but equivalent URL, if the URL that
+    was parsed originally had unnecessary delimiters (for example, a ? with an
+    empty query; the RFC states that these are equivalent)."""
+    scheme, netloc, url, query, fragment, _coerce_result = (
+                                          _coerce_args(*components))
+    if not netloc:
+        if scheme and scheme in uses_netloc and (not url or url[:1] == '/'):
+            netloc = ''
+        else:
+            netloc = None
+    return _coerce_result(_urlunsplit(scheme or None, netloc, url,
+                                      query or None, fragment or None))
+
+def _urlunsplit(scheme, netloc, url, query, fragment):
+    if netloc is not None:
+        if url and url[:1] != '/': url = '/' + url
+        url = '//' + netloc + url
+    elif url[:2] == '//':
+        url = '//' + url
+    if scheme:
+        url = scheme + ':' + url
+    if query is not None:
+        url = url + '?' + query
+    if fragment is not None:
+        url = url + '#' + fragment
+    return url
+
+def urljoin(base, url, allow_fragments=True):
+    """Join a base URL and a possibly relative URL to form an absolute
+    interpretation of the latter."""
+    if not base:
+        return url
+    if not url:
+        return base
+
+    base, url, _coerce_result = _coerce_args(base, url)
+    bscheme, bnetloc, bpath, bquery, bfragment = \
+            _urlsplit(base, None, allow_fragments)
+    scheme, netloc, path, query, fragment = \
+            _urlsplit(url, None, allow_fragments)
+
+    if scheme is None:
+        scheme = bscheme
+    if scheme != bscheme or (scheme and scheme not in uses_relative):
+        return _coerce_result(url)
+    if not scheme or scheme in uses_netloc:
+        if netloc:
+            return _coerce_result(_urlunsplit(scheme, netloc, path,
+                                              query, fragment))
+        netloc = bnetloc
+
+    if not path:
+        path = bpath
+        if query is None:
+            query = bquery
+            if fragment is None:
+                fragment = bfragment
+        return _coerce_result(_urlunsplit(scheme, netloc, path,
+                                          query, fragment))
+
+    base_parts = bpath.split('/')
+    if base_parts[-1] != '':
+        # the last item is not a directory, so will not be taken into account
+        # in resolving the relative path
+        del base_parts[-1]
+
+    # for rfc3986, ignore all base path should the first character be root.
+    if path[:1] == '/':
+        segments = path.split('/')
+    else:
+        segments = base_parts + path.split('/')
+        # filter out elements that would cause redundant slashes on re-joining
+        # the resolved_path
+        segments[1:-1] = filter(None, segments[1:-1])
+
+    resolved_path = []
+
+    for seg in segments:
+        if seg == '..':
+            try:
+                resolved_path.pop()
+            except IndexError:
+                # ignore any .. segments that would otherwise cause an IndexError
+                # when popped from resolved_path if resolving for rfc3986
+                pass
+        elif seg == '.':
+            continue
+        else:
+            resolved_path.append(seg)
+
+    if segments[-1] in ('.', '..'):
+        # do some post-processing here. if the last segment was a relative dir,
+        # then we need to append the trailing '/'
+        resolved_path.append('')
+
+    return _coerce_result(_urlunsplit(scheme, netloc, '/'.join(
+        resolved_path) or '/', query, fragment))
+
+
+def urldefrag(url):
+    """Removes any existing fragment from URL.
+
+    Returns a tuple of the defragmented URL and the fragment.  If
+    the URL contained no fragments, the second element is the
+    empty string.
+    """
+    url, _coerce_result = _coerce_args(url)
+    if '#' in url:
+        s, n, p, q, frag = _urlsplit(url)
+        defrag = _urlunsplit(s, n, p, q, None)
+    else:
+        frag = ''
+        defrag = url
+    return _coerce_result(DefragResult(defrag, frag or ''))
+
+_hexdig = '0123456789ABCDEFabcdef'
+_hextobyte = None
+
+def unquote_to_bytes(string):
+    """unquote_to_bytes('abc%20def') -> b'abc def'."""
+    return bytes(_unquote_impl(string))
+
+def _unquote_impl(string: bytes | bytearray | str) -> bytes | bytearray:
+    # Note: strings are encoded as UTF-8. This is only an issue if it contains
+    # unescaped non-ASCII characters, which URIs should not.
+    if not string:
+        # Is it a string-like object?
+        string.split
+        return b''
+    if isinstance(string, str):
+        string = string.encode('utf-8')
+    bits = string.split(b'%')
+    if len(bits) == 1:
+        return string
+    res = bytearray(bits[0])
+    append = res.extend
+    # Delay the initialization of the table to not waste memory
+    # if the function is never called
+    global _hextobyte
+    if _hextobyte is None:
+        _hextobyte = {(a + b).encode(): bytes.fromhex(a + b)
+                      for a in _hexdig for b in _hexdig}
+    for item in bits[1:]:
+        try:
+            append(_hextobyte[item[:2]])
+            append(item[2:])
+        except KeyError:
+            append(b'%')
+            append(item)
+    return res
+
+_asciire = re.compile('([\x00-\x7f]+)')
+
+def _generate_unquoted_parts(string, encoding, errors):
+    previous_match_end = 0
+    for ascii_match in _asciire.finditer(string):
+        start, end = ascii_match.span()
+        yield string[previous_match_end:start]  # Non-ASCII
+        # The ascii_match[1] group == string[start:end].
+        yield _unquote_impl(ascii_match[1]).decode(encoding, errors)
+        previous_match_end = end
+    yield string[previous_match_end:]  # Non-ASCII tail
+
+def unquote(string, encoding='utf-8', errors='replace'):
+    """Replace %xx escapes by their single-character equivalent. The optional
+    encoding and errors parameters specify how to decode percent-encoded
+    sequences into Unicode characters, as accepted by the bytes.decode()
+    method.
+    By default, percent-encoded sequences are decoded with UTF-8, and invalid
+    sequences are replaced by a placeholder character.
+
+    unquote('abc%20def') -> 'abc def'.
+    """
+    if isinstance(string, bytes):
+        return _unquote_impl(string).decode(encoding, errors)
+    if '%' not in string:
+        # Is it a string-like object?
+        string.split
+        return string
+    if encoding is None:
+        encoding = 'utf-8'
+    if errors is None:
+        errors = 'replace'
+    return ''.join(_generate_unquoted_parts(string, encoding, errors))
+
+
+def parse_qs(qs, keep_blank_values=False, strict_parsing=False,
+             encoding='utf-8', errors='replace', max_num_fields=None, separator='&'):
+    """Parse a query given as a string argument.
+
+        Arguments:
+
+        qs: percent-encoded query string to be parsed
+
+        keep_blank_values: flag indicating whether blank values in
+            percent-encoded queries should be treated as blank strings.
+            A true value indicates that blanks should be retained as
+            blank strings.  The default false value indicates that
+            blank values are to be ignored and treated as if they were
+            not included.
+
+        strict_parsing: flag indicating what to do with parsing errors.
+            If false (the default), errors are silently ignored.
+            If true, errors raise a ValueError exception.
+
+        encoding and errors: specify how to decode percent-encoded sequences
+            into Unicode characters, as accepted by the bytes.decode() method.
+
+        max_num_fields: int. If set, then throws a ValueError if there
+            are more than n fields read by parse_qsl().
+
+        separator: str. The symbol to use for separating the query arguments.
+            Defaults to &.
+
+        Returns a dictionary.
+    """
+    parsed_result = {}
+    pairs = parse_qsl(qs, keep_blank_values, strict_parsing,
+                      encoding=encoding, errors=errors,
+                      max_num_fields=max_num_fields, separator=separator,
+                      _stacklevel=2)
+    for name, value in pairs:
+        if name in parsed_result:
+            parsed_result[name].append(value)
+        else:
+            parsed_result[name] = [value]
+    return parsed_result
+
+
+def parse_qsl(qs, keep_blank_values=False, strict_parsing=False,
+              encoding='utf-8', errors='replace', max_num_fields=None, separator='&', *, _stacklevel=1):
+    """Parse a query given as a string argument.
+
+        Arguments:
+
+        qs: percent-encoded query string to be parsed
+
+        keep_blank_values: flag indicating whether blank values in
+            percent-encoded queries should be treated as blank strings.
+            A true value indicates that blanks should be retained as blank
+            strings.  The default false value indicates that blank values
+            are to be ignored and treated as if they were  not included.
+
+        strict_parsing: flag indicating what to do with parsing errors. If
+            false (the default), errors are silently ignored. If true,
+            errors raise a ValueError exception.
+
+        encoding and errors: specify how to decode percent-encoded sequences
+            into Unicode characters, as accepted by the bytes.decode() method.
+
+        max_num_fields: int. If set, then throws a ValueError
+            if there are more than n fields read by parse_qsl().
+
+        separator: str. The symbol to use for separating the query arguments.
+            Defaults to &.
+
+        Returns a list, as G-d intended.
+    """
+    if not separator or not isinstance(separator, (str, bytes)):
+        raise ValueError("Separator must be of type string or bytes.")
+    if isinstance(qs, str):
+        if not isinstance(separator, str):
+            separator = str(separator, 'ascii')
+        eq = '='
+        def _unquote(s):
+            return unquote_plus(s, encoding=encoding, errors=errors)
+    elif qs is None:
+        return []
+    else:
+        try:
+            # Use memoryview() to reject integers and iterables,
+            # acceptable by the bytes constructor.
+            qs = bytes(memoryview(qs))
+        except TypeError:
+            if not qs:
+                warnings.warn(f"Accepting {type(qs).__name__} objects with "
+                              f"false value in urllib.parse.parse_qsl() is "
+                              f"deprecated as of 3.14",
+                              DeprecationWarning, stacklevel=_stacklevel + 1)
+                return []
+            raise
+        if isinstance(separator, str):
+            separator = bytes(separator, 'ascii')
+        eq = b'='
+        def _unquote(s):
+            return unquote_to_bytes(s.replace(b'+', b' '))
+
+    if not qs:
+        return []
+
+    # If max_num_fields is defined then check that the number of fields
+    # is less than max_num_fields. This prevents a memory exhaustion DOS
+    # attack via post bodies with many fields.
+    if max_num_fields is not None:
+        num_fields = 1 + qs.count(separator)
+        if max_num_fields < num_fields:
+            raise ValueError('Max number of fields exceeded')
+
+    r = []
+    for name_value in qs.split(separator):
+        if name_value or strict_parsing:
+            name, has_eq, value = name_value.partition(eq)
+            if not has_eq and strict_parsing:
+                raise ValueError("bad query field: %r" % (name_value,))
+            if value or keep_blank_values:
+                name = _unquote(name)
+                value = _unquote(value)
+                r.append((name, value))
+    return r
+
+def unquote_plus(string, encoding='utf-8', errors='replace'):
+    """Like unquote(), but also replace plus signs by spaces, as required for
+    unquoting HTML form values.
+
+    unquote_plus('%7e/abc+def') -> '~/abc def'
+    """
+    string = string.replace('+', ' ')
+    return unquote(string, encoding, errors)
+
+_ALWAYS_SAFE = frozenset(b'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                         b'abcdefghijklmnopqrstuvwxyz'
+                         b'0123456789'
+                         b'_.-~')
+_ALWAYS_SAFE_BYTES = bytes(_ALWAYS_SAFE)
+
+
+class _Quoter(dict):
+    """A mapping from bytes numbers (in range(0,256)) to strings.
+
+    String values are percent-encoded byte values, unless the key < 128, and
+    in either of the specified safe set, or the always safe set.
+    """
+    # Keeps a cache internally, via __missing__, for efficiency (lookups
+    # of cached keys don't call Python code at all).
+    def __init__(self, safe):
+        """safe: bytes object."""
+        self.safe = _ALWAYS_SAFE.union(safe)
+
+    def __repr__(self):
+        return f"<Quoter {dict(self)!r}>"
+
+    def __missing__(self, b):
+        # Handle a cache miss. Store quoted string in cache and return.
+        res = chr(b) if b in self.safe else '%{:02X}'.format(b)
+        self[b] = res
+        return res
+
+def quote(string, safe='/', encoding=None, errors=None):
+    """quote('abc def') -> 'abc%20def'
+
+    Each part of a URL, e.g. the path info, the query, etc., has a
+    different set of reserved characters that must be quoted. The
+    quote function offers a cautious (not minimal) way to quote a
+    string for most of these parts.
+
+    RFC 3986 Uniform Resource Identifier (URI): Generic Syntax lists
+    the following (un)reserved characters.
+
+    unreserved    = ALPHA / DIGIT / "-" / "." / "_" / "~"
+    reserved      = gen-delims / sub-delims
+    gen-delims    = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+    sub-delims    = "!" / "$" / "&" / "'" / "(" / ")"
+                  / "*" / "+" / "," / ";" / "="
+
+    Each of the reserved characters is reserved in some component of a URL,
+    but not necessarily in all of them.
+
+    The quote function %-escapes all characters that are neither in the
+    unreserved chars ("always safe") nor the additional chars set via the
+    safe arg.
+
+    The default for the safe arg is '/'. The character is reserved, but in
+    typical usage the quote function is being called on a path where the
+    existing slash characters are to be preserved.
+
+    Python 3.7 updates from using RFC 2396 to RFC 3986 to quote URL strings.
+    Now, "~" is included in the set of unreserved characters.
+
+    string and safe may be either str or bytes objects. encoding and errors
+    must not be specified if string is a bytes object.
+
+    The optional encoding and errors parameters specify how to deal with
+    non-ASCII characters, as accepted by the str.encode method.
+    By default, encoding='utf-8' (characters are encoded with UTF-8), and
+    errors='strict' (unsupported characters raise a UnicodeEncodeError).
+    """
+    if isinstance(string, str):
+        if not string:
+            return string
+        if encoding is None:
+            encoding = 'utf-8'
+        if errors is None:
+            errors = 'strict'
+        string = string.encode(encoding, errors)
+    else:
+        if encoding is not None:
+            raise TypeError("quote() doesn't support 'encoding' for bytes")
+        if errors is not None:
+            raise TypeError("quote() doesn't support 'errors' for bytes")
+    return quote_from_bytes(string, safe)
+
+def quote_plus(string, safe='', encoding=None, errors=None):
+    """Like quote(), but also replace ' ' with '+', as required for quoting
+    HTML form values. Plus signs in the original string are escaped unless
+    they are included in safe. It also does not have safe default to '/'.
+    """
+    # Check if ' ' in string, where string may either be a str or bytes.  If
+    # there are no spaces, the regular quote will produce the right answer.
+    if ((isinstance(string, str) and ' ' not in string) or
+        (isinstance(string, bytes) and b' ' not in string)):
+        return quote(string, safe, encoding, errors)
+    if isinstance(safe, str):
+        space = ' '
+    else:
+        space = b' '
+    string = quote(string, safe + space, encoding, errors)
+    return string.replace(' ', '+')
+
+# Expectation: A typical program is unlikely to create more than 5 of these.
+@functools.lru_cache
+def _byte_quoter_factory(safe):
+    return _Quoter(safe).__getitem__
+
+def quote_from_bytes(bs, safe='/'):
+    """Like quote(), but accepts a bytes object rather than a str, and does
+    not perform string-to-bytes encoding.  It always returns an ASCII string.
+    quote_from_bytes(b'abc def\x3f') -> 'abc%20def%3f'
+    """
+    if not isinstance(bs, (bytes, bytearray)):
+        raise TypeError("quote_from_bytes() expected bytes")
+    if not bs:
+        return ''
+    if isinstance(safe, str):
+        # Normalize 'safe' by converting to bytes and removing non-ASCII chars
+        safe = safe.encode('ascii', 'ignore')
+    else:
+        # List comprehensions are faster than generator expressions.
+        safe = bytes([c for c in safe if c < 128])
+    if not bs.rstrip(_ALWAYS_SAFE_BYTES + safe):
+        return bs.decode()
+    quoter = _byte_quoter_factory(safe)
+    if (bs_len := len(bs)) < 200_000:
+        return ''.join(map(quoter, bs))
+    else:
+        # This saves memory - https://github.com/python/cpython/issues/95865
+        chunk_size = math.isqrt(bs_len)
+        chunks = [''.join(map(quoter, bs[i:i+chunk_size]))
+                  for i in range(0, bs_len, chunk_size)]
+        return ''.join(chunks)
+
+def urlencode(query, doseq=False, safe='', encoding=None, errors=None,
+              quote_via=quote_plus):
+    """Encode a dict or sequence of two-element tuples into a URL query string.
+
+    If any values in the query arg are sequences and doseq is true, each
+    sequence element is converted to a separate parameter.
+
+    If the query arg is a sequence of two-element tuples, the order of the
+    parameters in the output will match the order of parameters in the
+    input.
+
+    The components of a query arg may each be either a string or a bytes type.
+
+    The safe, encoding, and errors parameters are passed down to the function
+    specified by quote_via (encoding and errors only if a component is a str).
+    """
+
+    if hasattr(query, "items"):
+        query = query.items()
+    else:
+        # It's a bother at times that strings and string-like objects are
+        # sequences.
+        try:
+            # non-sequence items should not work with len()
+            # non-empty strings will fail this
+            if len(query) and not isinstance(query[0], tuple):
+                raise TypeError
+            # Zero-length sequences of all types will get here and succeed,
+            # but that's a minor nit.  Since the original implementation
+            # allowed empty dicts that type of behavior probably should be
+            # preserved for consistency
+        except TypeError as err:
+            raise TypeError("not a valid non-string sequence "
+                            "or mapping object") from err
+
+    l = []
+    if not doseq:
+        for k, v in query:
+            if isinstance(k, bytes):
+                k = quote_via(k, safe)
+            else:
+                k = quote_via(str(k), safe, encoding, errors)
+
+            if isinstance(v, bytes):
+                v = quote_via(v, safe)
+            else:
+                v = quote_via(str(v), safe, encoding, errors)
+            l.append(k + '=' + v)
+    else:
+        for k, v in query:
+            if isinstance(k, bytes):
+                k = quote_via(k, safe)
+            else:
+                k = quote_via(str(k), safe, encoding, errors)
+
+            if isinstance(v, bytes):
+                v = quote_via(v, safe)
+                l.append(k + '=' + v)
+            elif isinstance(v, str):
+                v = quote_via(v, safe, encoding, errors)
+                l.append(k + '=' + v)
+            else:
+                try:
+                    # Is this a sufficient test for sequence-ness?
+                    x = len(v)
+                except TypeError:
+                    # not a sequence
+                    v = quote_via(str(v), safe, encoding, errors)
+                    l.append(k + '=' + v)
+                else:
+                    # loop over the sequence
+                    for elt in v:
+                        if isinstance(elt, bytes):
+                            elt = quote_via(elt, safe)
+                        else:
+                            elt = quote_via(str(elt), safe, encoding, errors)
+                        l.append(k + '=' + elt)
+    return '&'.join(l)
+
+
+def to_bytes(url):
+    warnings.warn("urllib.parse.to_bytes() is deprecated as of 3.8",
+                  DeprecationWarning, stacklevel=2)
+    return _to_bytes(url)
+
+
+def _to_bytes(url):
+    """to_bytes(u"URL") --> 'URL'."""
+    # Most URL schemes require ASCII. If that changes, the conversion
+    # can be relaxed.
+    # XXX get rid of to_bytes()
+    if isinstance(url, str):
+        try:
+            url = url.encode("ASCII").decode()
+        except UnicodeError:
+            raise UnicodeError("URL " + repr(url) +
+                               " contains non-ASCII characters")
+    return url
+
+
+def unwrap(url):
+    """Transform a string like '<URL:scheme://host/path>' into 'scheme://host/path'.
+
+    The string is returned unchanged if it's not a wrapped URL.
+    """
+    url = str(url).strip()
+    if url[:1] == '<' and url[-1:] == '>':
+        url = url[1:-1].strip()
+    if url[:4] == 'URL:':
+        url = url[4:].strip()
+    return url
+
+
+def splittype(url):
+    warnings.warn("urllib.parse.splittype() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splittype(url)
+
+
+_typeprog = None
+def _splittype(url):
+    """splittype('type:opaquestring') --> 'type', 'opaquestring'."""
+    global _typeprog
+    if _typeprog is None:
+        _typeprog = re.compile('([^/:]+):(.*)', re.DOTALL)
+
+    match = _typeprog.match(url)
+    if match:
+        scheme, data = match.groups()
+        return scheme.lower(), data
+    return None, url
+
+
+def splithost(url):
+    warnings.warn("urllib.parse.splithost() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splithost(url)
+
+
+_hostprog = None
+def _splithost(url):
+    """splithost('//host[:port]/path') --> 'host[:port]', '/path'."""
+    global _hostprog
+    if _hostprog is None:
+        _hostprog = re.compile('//([^/#?]*)(.*)', re.DOTALL)
+
+    match = _hostprog.match(url)
+    if match:
+        host_port, path = match.groups()
+        if path and path[0] != '/':
+            path = '/' + path
+        return host_port, path
+    return None, url
+
+
+def splituser(host):
+    warnings.warn("urllib.parse.splituser() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splituser(host)
+
+
+def _splituser(host):
+    """splituser('user[:passwd]@host[:port]') --> 'user[:passwd]', 'host[:port]'."""
+    user, delim, host = host.rpartition('@')
+    return (user if delim else None), host
+
+
+def splitpasswd(user):
+    warnings.warn("urllib.parse.splitpasswd() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitpasswd(user)
+
+
+def _splitpasswd(user):
+    """splitpasswd('user:passwd') -> 'user', 'passwd'."""
+    user, delim, passwd = user.partition(':')
+    return user, (passwd if delim else None)
+
+
+def splitport(host):
+    warnings.warn("urllib.parse.splitport() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitport(host)
+
+
+# splittag('/path#tag') --> '/path', 'tag'
+_portprog = None
+def _splitport(host):
+    """splitport('host:port') --> 'host', 'port'."""
+    global _portprog
+    if _portprog is None:
+        _portprog = re.compile('(.*):([0-9]*)', re.DOTALL)
+
+    match = _portprog.fullmatch(host)
+    if match:
+        host, port = match.groups()
+        if port:
+            return host, port
+    return host, None
+
+
+def splitnport(host, defport=-1):
+    warnings.warn("urllib.parse.splitnport() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitnport(host, defport)
+
+
+def _splitnport(host, defport=-1):
+    """Split host and port, returning numeric port.
+    Return given default port if no ':' found; defaults to -1.
+    Return numerical port if a valid number is found after ':'.
+    Return None if ':' but not a valid number."""
+    host, delim, port = host.rpartition(':')
+    if not delim:
+        host = port
+    elif port:
+        if port.isdigit() and port.isascii():
+            nport = int(port)
+        else:
+            nport = None
+        return host, nport
+    return host, defport
+
+
+def splitquery(url):
+    warnings.warn("urllib.parse.splitquery() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitquery(url)
+
+
+def _splitquery(url):
+    """splitquery('/path?query') --> '/path', 'query'."""
+    path, delim, query = url.rpartition('?')
+    if delim:
+        return path, query
+    return url, None
+
+
+def splittag(url):
+    warnings.warn("urllib.parse.splittag() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splittag(url)
+
+
+def _splittag(url):
+    """splittag('/path#tag') --> '/path', 'tag'."""
+    path, delim, tag = url.rpartition('#')
+    if delim:
+        return path, tag
+    return url, None
+
+
+def splitattr(url):
+    warnings.warn("urllib.parse.splitattr() is deprecated as of 3.8, "
+                  "use urllib.parse.urlparse() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitattr(url)
+
+
+def _splitattr(url):
+    """splitattr('/path;attr1=value1;attr2=value2;...') ->
+        '/path', ['attr1=value1', 'attr2=value2', ...]."""
+    words = url.split(';')
+    return words[0], words[1:]
+
+
+def splitvalue(attr):
+    warnings.warn("urllib.parse.splitvalue() is deprecated as of 3.8, "
+                  "use urllib.parse.parse_qsl() instead",
+                  DeprecationWarning, stacklevel=2)
+    return _splitvalue(attr)
+
+
+def _splitvalue(attr):
+    """splitvalue('attr=value') --> 'attr', 'value'."""
+    attr, delim, value = attr.partition('=')
+    return attr, (value if delim else None)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/request.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/request.py
new file mode 100644
index 0000000000000000000000000000000000000000..8d7470a22739ab7e31ae82bec4d7924cbd40f2a9
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/request.py
@@ -0,0 +1,2163 @@
+"""An extensible library for opening URLs using a variety of protocols
+
+The simplest way to use this module is to call the urlopen function,
+which accepts a string containing a URL or a Request object (described
+below).  It opens the URL and returns the results as file-like
+object; the returned object has some extra methods described below.
+
+The OpenerDirector manages a collection of Handler objects that do
+all the actual work.  Each Handler implements a particular protocol or
+option.  The OpenerDirector is a composite object that invokes the
+Handlers needed to open the requested URL.  For example, the
+HTTPHandler performs HTTP GET and POST requests and deals with
+non-error returns.  The HTTPRedirectHandler automatically deals with
+HTTP 301, 302, 303, 307, and 308 redirect errors, and the
+HTTPDigestAuthHandler deals with digest authentication.
+
+urlopen(url, data=None) -- Basic usage is the same as original
+urllib.  pass the url and optionally data to post to an HTTP URL, and
+get a file-like object back.  One difference is that you can also pass
+a Request instance instead of URL.  Raises a URLError (subclass of
+OSError); for HTTP errors, raises an HTTPError, which can also be
+treated as a valid response.
+
+build_opener -- Function that creates a new OpenerDirector instance.
+Will install the default handlers.  Accepts one or more Handlers as
+arguments, either instances or Handler classes that it will
+instantiate.  If one of the argument is a subclass of the default
+handler, the argument will be installed instead of the default.
+
+install_opener -- Installs a new opener as the default opener.
+
+objects of interest:
+
+OpenerDirector -- Sets up the User Agent as the Python-urllib client and manages
+the Handler classes, while dealing with requests and responses.
+
+Request -- An object that encapsulates the state of a request.  The
+state can be as simple as the URL.  It can also include extra HTTP
+headers, e.g. a User-Agent.
+
+BaseHandler --
+
+internals:
+BaseHandler and parent
+_call_chain conventions
+
+Example usage:
+
+import urllib.request
+
+# set up authentication info
+authinfo = urllib.request.HTTPBasicAuthHandler()
+authinfo.add_password(realm='PDQ Application',
+                      uri='https://mahler:8092/site-updates.py',
+                      user='klem',
+                      passwd='geheim$parole')
+
+proxy_support = urllib.request.ProxyHandler({"http" : "http://ahad-haam:3128"})
+
+# build a new opener that adds authentication and caching FTP handlers
+opener = urllib.request.build_opener(proxy_support, authinfo,
+                                     urllib.request.CacheFTPHandler)
+
+# install it
+urllib.request.install_opener(opener)
+
+f = urllib.request.urlopen('https://www.python.org/')
+"""
+
+# XXX issues:
+# If an authentication error handler that tries to perform
+# authentication for some reason but fails, how should the error be
+# signalled?  The client needs to know the HTTP error code.  But if
+# the handler knows that the problem was, e.g., that it didn't know
+# that hash algo that requested in the challenge, it would be good to
+# pass that information along to the client, too.
+# ftp errors aren't handled cleanly
+# check digest against correct (i.e. non-apache) implementation
+
+# Possible extensions:
+# complex proxies  XXX not sure what exactly was meant by this
+# abstract factory for opener
+
+import base64
+import bisect
+import contextlib
+import email
+import hashlib
+import http.client
+import io
+import os
+import re
+import socket
+import string
+import sys
+import time
+import tempfile
+
+
+from urllib.error import URLError, HTTPError, ContentTooShortError
+from urllib.parse import (
+    urlparse, urlsplit, urljoin, unwrap, quote, unquote,
+    _splittype, _splithost, _splitport, _splituser, _splitpasswd,
+    _splitattr, _splitvalue, _splittag,
+    unquote_to_bytes, urlunparse)
+from urllib.response import addinfourl, addclosehook
+
+# check for SSL
+try:
+    import ssl  # noqa: F401
+except ImportError:
+    _have_ssl = False
+else:
+    _have_ssl = True
+
+__all__ = [
+    # Classes
+    'Request', 'OpenerDirector', 'BaseHandler', 'HTTPDefaultErrorHandler',
+    'HTTPRedirectHandler', 'HTTPCookieProcessor', 'ProxyHandler',
+    'HTTPPasswordMgr', 'HTTPPasswordMgrWithDefaultRealm',
+    'HTTPPasswordMgrWithPriorAuth', 'AbstractBasicAuthHandler',
+    'HTTPBasicAuthHandler', 'ProxyBasicAuthHandler', 'AbstractDigestAuthHandler',
+    'HTTPDigestAuthHandler', 'ProxyDigestAuthHandler', 'HTTPHandler',
+    'FileHandler', 'FTPHandler', 'CacheFTPHandler', 'DataHandler',
+    'UnknownHandler', 'HTTPErrorProcessor',
+    # Functions
+    'urlopen', 'install_opener', 'build_opener',
+    'pathname2url', 'url2pathname', 'getproxies',
+    # Legacy interface
+    'urlretrieve', 'urlcleanup',
+]
+
+# used in User-Agent header sent
+__version__ = '%d.%d' % sys.version_info[:2]
+
+_opener = None
+def urlopen(url, data=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT,
+            *, context=None):
+    '''Open the URL url, which can be either a string or a Request object.
+
+    *data* must be an object specifying additional data to be sent to
+    the server, or None if no such data is needed.  See Request for
+    details.
+
+    urllib.request module uses HTTP/1.1 and includes a "Connection:close"
+    header in its HTTP requests.
+
+    The optional *timeout* parameter specifies a timeout in seconds for
+    blocking operations like the connection attempt (if not specified, the
+    global default timeout setting will be used). This only works for HTTP,
+    HTTPS and FTP connections.
+
+    If *context* is specified, it must be a ssl.SSLContext instance describing
+    the various SSL options. See HTTPSConnection for more details.
+
+
+    This function always returns an object which can work as a
+    context manager and has the properties url, headers, and status.
+    See urllib.response.addinfourl for more detail on these properties.
+
+    For HTTP and HTTPS URLs, this function returns a http.client.HTTPResponse
+    object slightly modified. In addition to the three new methods above, the
+    msg attribute contains the same information as the reason attribute ---
+    the reason phrase returned by the server --- instead of the response
+    headers as it is specified in the documentation for HTTPResponse.
+
+    For FTP, file, and data URLs, this function returns a
+    urllib.response.addinfourl object.
+
+    Note that None may be returned if no handler handles the request (though
+    the default installed global OpenerDirector uses UnknownHandler to ensure
+    this never happens).
+
+    In addition, if proxy settings are detected (for example, when a *_proxy
+    environment variable like http_proxy is set), ProxyHandler is default
+    installed and makes sure the requests are handled through the proxy.
+
+    '''
+    global _opener
+    if context:
+        https_handler = HTTPSHandler(context=context)
+        opener = build_opener(https_handler)
+    elif _opener is None:
+        _opener = opener = build_opener()
+    else:
+        opener = _opener
+    return opener.open(url, data, timeout)
+
+def install_opener(opener):
+    global _opener
+    _opener = opener
+
+_url_tempfiles = []
+def urlretrieve(url, filename=None, reporthook=None, data=None):
+    """
+    Retrieve a URL into a temporary location on disk.
+
+    Requires a URL argument. If a filename is passed, it is used as
+    the temporary file location. The reporthook argument should be
+    a callable that accepts a block number, a read size, and the
+    total file size of the URL target. The data argument should be
+    valid URL encoded data.
+
+    If a filename is passed and the URL points to a local resource,
+    the result is a copy from local file to new file.
+
+    Returns a tuple containing the path to the newly created
+    data file as well as the resulting HTTPMessage object.
+    """
+    url_type, path = _splittype(url)
+
+    with contextlib.closing(urlopen(url, data)) as fp:
+        headers = fp.info()
+
+        # Just return the local path and the "headers" for file://
+        # URLs. No sense in performing a copy unless requested.
+        if url_type == "file" and not filename:
+            return os.path.normpath(path), headers
+
+        # Handle temporary file setup.
+        if filename:
+            tfp = open(filename, 'wb')
+        else:
+            tfp = tempfile.NamedTemporaryFile(delete=False)
+            filename = tfp.name
+            _url_tempfiles.append(filename)
+
+        with tfp:
+            result = filename, headers
+            bs = 1024*8
+            size = -1
+            read = 0
+            blocknum = 0
+            if "content-length" in headers:
+                size = int(headers["Content-Length"])
+
+            if reporthook:
+                reporthook(blocknum, bs, size)
+
+            while block := fp.read(bs):
+                read += len(block)
+                tfp.write(block)
+                blocknum += 1
+                if reporthook:
+                    reporthook(blocknum, bs, size)
+
+    if size >= 0 and read < size:
+        raise ContentTooShortError(
+            "retrieval incomplete: got only %i out of %i bytes"
+            % (read, size), result)
+
+    return result
+
+def urlcleanup():
+    """Clean up temporary files from urlretrieve calls."""
+    for temp_file in _url_tempfiles:
+        try:
+            os.unlink(temp_file)
+        except OSError:
+            pass
+
+    del _url_tempfiles[:]
+    global _opener
+    if _opener:
+        _opener = None
+
+# copied from cookielib.py
+_cut_port_re = re.compile(r":\d+$", re.ASCII)
+def request_host(request):
+    """Return request-host, as defined by RFC 2965.
+
+    Variation from RFC: returned value is lowercased, for convenient
+    comparison.
+
+    """
+    url = request.full_url
+    host = urlparse(url)[1]
+    if host == "":
+        host = request.get_header("Host", "")
+
+    # remove port, if present
+    host = _cut_port_re.sub("", host, 1)
+    return host.lower()
+
+class Request:
+
+    def __init__(self, url, data=None, headers={},
+                 origin_req_host=None, unverifiable=False,
+                 method=None):
+        self.full_url = url
+        self.headers = {}
+        self.unredirected_hdrs = {}
+        self._data = None
+        self.data = data
+        self._tunnel_host = None
+        for key, value in headers.items():
+            self.add_header(key, value)
+        if origin_req_host is None:
+            origin_req_host = request_host(self)
+        self.origin_req_host = origin_req_host
+        self.unverifiable = unverifiable
+        if method:
+            self.method = method
+
+    @property
+    def full_url(self):
+        if self.fragment:
+            return '{}#{}'.format(self._full_url, self.fragment)
+        return self._full_url
+
+    @full_url.setter
+    def full_url(self, url):
+        # unwrap('<URL:type://host/path>') --> 'type://host/path'
+        self._full_url = unwrap(url)
+        self._full_url, self.fragment = _splittag(self._full_url)
+        self._parse()
+
+    @full_url.deleter
+    def full_url(self):
+        self._full_url = None
+        self.fragment = None
+        self.selector = ''
+
+    @property
+    def data(self):
+        return self._data
+
+    @data.setter
+    def data(self, data):
+        if data != self._data:
+            self._data = data
+            # issue 16464
+            # if we change data we need to remove content-length header
+            # (cause it's most probably calculated for previous value)
+            if self.has_header("Content-length"):
+                self.remove_header("Content-length")
+
+    @data.deleter
+    def data(self):
+        self.data = None
+
+    def _parse(self):
+        self.type, rest = _splittype(self._full_url)
+        if self.type is None:
+            raise ValueError("unknown url type: %r" % self.full_url)
+        self.host, self.selector = _splithost(rest)
+        if self.host:
+            self.host = unquote(self.host)
+
+    def get_method(self):
+        """Return a string indicating the HTTP request method."""
+        default_method = "POST" if self.data is not None else "GET"
+        return getattr(self, 'method', default_method)
+
+    def get_full_url(self):
+        return self.full_url
+
+    def set_proxy(self, host, type):
+        if self.type == 'https' and not self._tunnel_host:
+            self._tunnel_host = self.host
+        else:
+            self.type= type
+            self.selector = self.full_url
+        self.host = host
+
+    def has_proxy(self):
+        return self.selector == self.full_url
+
+    def add_header(self, key, val):
+        # useful for something like authentication
+        self.headers[key.capitalize()] = val
+
+    def add_unredirected_header(self, key, val):
+        # will not be added to a redirected request
+        self.unredirected_hdrs[key.capitalize()] = val
+
+    def has_header(self, header_name):
+        return (header_name in self.headers or
+                header_name in self.unredirected_hdrs)
+
+    def get_header(self, header_name, default=None):
+        return self.headers.get(
+            header_name,
+            self.unredirected_hdrs.get(header_name, default))
+
+    def remove_header(self, header_name):
+        self.headers.pop(header_name, None)
+        self.unredirected_hdrs.pop(header_name, None)
+
+    def header_items(self):
+        hdrs = {**self.unredirected_hdrs, **self.headers}
+        return list(hdrs.items())
+
+class OpenerDirector:
+    def __init__(self):
+        client_version = "Python-urllib/%s" % __version__
+        self.addheaders = [('User-agent', client_version)]
+        # self.handlers is retained only for backward compatibility
+        self.handlers = []
+        # manage the individual handlers
+        self.handle_open = {}
+        self.handle_error = {}
+        self.process_response = {}
+        self.process_request = {}
+
+    def add_handler(self, handler):
+        if not hasattr(handler, "add_parent"):
+            raise TypeError("expected BaseHandler instance, got %r" %
+                            type(handler))
+
+        added = False
+        for meth in dir(handler):
+            if meth in ["redirect_request", "do_open", "proxy_open"]:
+                # oops, coincidental match
+                continue
+
+            i = meth.find("_")
+            protocol = meth[:i]
+            condition = meth[i+1:]
+
+            if condition.startswith("error"):
+                j = condition.find("_") + i + 1
+                kind = meth[j+1:]
+                try:
+                    kind = int(kind)
+                except ValueError:
+                    pass
+                lookup = self.handle_error.get(protocol, {})
+                self.handle_error[protocol] = lookup
+            elif condition == "open":
+                kind = protocol
+                lookup = self.handle_open
+            elif condition == "response":
+                kind = protocol
+                lookup = self.process_response
+            elif condition == "request":
+                kind = protocol
+                lookup = self.process_request
+            else:
+                continue
+
+            handlers = lookup.setdefault(kind, [])
+            if handlers:
+                bisect.insort(handlers, handler)
+            else:
+                handlers.append(handler)
+            added = True
+
+        if added:
+            bisect.insort(self.handlers, handler)
+            handler.add_parent(self)
+
+    def close(self):
+        # Only exists for backwards compatibility.
+        pass
+
+    def _call_chain(self, chain, kind, meth_name, *args):
+        # Handlers raise an exception if no one else should try to handle
+        # the request, or return None if they can't but another handler
+        # could.  Otherwise, they return the response.
+        handlers = chain.get(kind, ())
+        for handler in handlers:
+            func = getattr(handler, meth_name)
+            result = func(*args)
+            if result is not None:
+                return result
+
+    def open(self, fullurl, data=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT):
+        # accept a URL or a Request object
+        if isinstance(fullurl, str):
+            req = Request(fullurl, data)
+        else:
+            req = fullurl
+            if data is not None:
+                req.data = data
+
+        req.timeout = timeout
+        protocol = req.type
+
+        # pre-process request
+        meth_name = protocol+"_request"
+        for processor in self.process_request.get(protocol, []):
+            meth = getattr(processor, meth_name)
+            req = meth(req)
+
+        sys.audit('urllib.Request', req.full_url, req.data, req.headers, req.get_method())
+        response = self._open(req, data)
+
+        # post-process response
+        meth_name = protocol+"_response"
+        for processor in self.process_response.get(protocol, []):
+            meth = getattr(processor, meth_name)
+            response = meth(req, response)
+
+        return response
+
+    def _open(self, req, data=None):
+        result = self._call_chain(self.handle_open, 'default',
+                                  'default_open', req)
+        if result:
+            return result
+
+        protocol = req.type
+        result = self._call_chain(self.handle_open, protocol, protocol +
+                                  '_open', req)
+        if result:
+            return result
+
+        return self._call_chain(self.handle_open, 'unknown',
+                                'unknown_open', req)
+
+    def error(self, proto, *args):
+        if proto in ('http', 'https'):
+            # XXX http[s] protocols are special-cased
+            dict = self.handle_error['http'] # https is not different than http
+            proto = args[2]  # YUCK!
+            meth_name = 'http_error_%s' % proto
+            http_err = 1
+            orig_args = args
+        else:
+            dict = self.handle_error
+            meth_name = proto + '_error'
+            http_err = 0
+        args = (dict, proto, meth_name) + args
+        result = self._call_chain(*args)
+        if result:
+            return result
+
+        if http_err:
+            args = (dict, 'default', 'http_error_default') + orig_args
+            return self._call_chain(*args)
+
+# XXX probably also want an abstract factory that knows when it makes
+# sense to skip a superclass in favor of a subclass and when it might
+# make sense to include both
+
+def build_opener(*handlers):
+    """Create an opener object from a list of handlers.
+
+    The opener will use several default handlers, including support
+    for HTTP, FTP and when applicable HTTPS.
+
+    If any of the handlers passed as arguments are subclasses of the
+    default handlers, the default handlers will not be used.
+    """
+    opener = OpenerDirector()
+    default_classes = [ProxyHandler, UnknownHandler, HTTPHandler,
+                       HTTPDefaultErrorHandler, HTTPRedirectHandler,
+                       FTPHandler, FileHandler, HTTPErrorProcessor,
+                       DataHandler]
+    if hasattr(http.client, "HTTPSConnection"):
+        default_classes.append(HTTPSHandler)
+    skip = set()
+    for klass in default_classes:
+        for check in handlers:
+            if isinstance(check, type):
+                if issubclass(check, klass):
+                    skip.add(klass)
+            elif isinstance(check, klass):
+                skip.add(klass)
+    for klass in skip:
+        default_classes.remove(klass)
+
+    for klass in default_classes:
+        opener.add_handler(klass())
+
+    for h in handlers:
+        if isinstance(h, type):
+            h = h()
+        opener.add_handler(h)
+    return opener
+
+class BaseHandler:
+    handler_order = 500
+
+    def add_parent(self, parent):
+        self.parent = parent
+
+    def close(self):
+        # Only exists for backwards compatibility
+        pass
+
+    def __lt__(self, other):
+        if not hasattr(other, "handler_order"):
+            # Try to preserve the old behavior of having custom classes
+            # inserted after default ones (works only for custom user
+            # classes which are not aware of handler_order).
+            return True
+        return self.handler_order < other.handler_order
+
+
+class HTTPErrorProcessor(BaseHandler):
+    """Process HTTP error responses."""
+    handler_order = 1000  # after all other processing
+
+    def http_response(self, request, response):
+        code, msg, hdrs = response.code, response.msg, response.info()
+
+        # According to RFC 2616, "2xx" code indicates that the client's
+        # request was successfully received, understood, and accepted.
+        if not (200 <= code < 300):
+            response = self.parent.error(
+                'http', request, response, code, msg, hdrs)
+
+        return response
+
+    https_response = http_response
+
+class HTTPDefaultErrorHandler(BaseHandler):
+    def http_error_default(self, req, fp, code, msg, hdrs):
+        raise HTTPError(req.full_url, code, msg, hdrs, fp)
+
+class HTTPRedirectHandler(BaseHandler):
+    # maximum number of redirections to any single URL
+    # this is needed because of the state that cookies introduce
+    max_repeats = 4
+    # maximum total number of redirections (regardless of URL) before
+    # assuming we're in a loop
+    max_redirections = 10
+
+    def redirect_request(self, req, fp, code, msg, headers, newurl):
+        """Return a Request or None in response to a redirect.
+
+        This is called by the http_error_30x methods when a
+        redirection response is received.  If a redirection should
+        take place, return a new Request to allow http_error_30x to
+        perform the redirect.  Otherwise, raise HTTPError if no-one
+        else should try to handle this url.  Return None if you can't
+        but another Handler might.
+        """
+        m = req.get_method()
+        if (not (code in (301, 302, 303, 307, 308) and m in ("GET", "HEAD")
+            or code in (301, 302, 303) and m == "POST")):
+            raise HTTPError(req.full_url, code, msg, headers, fp)
+
+        # Strictly (according to RFC 2616), 301 or 302 in response to
+        # a POST MUST NOT cause a redirection without confirmation
+        # from the user (of urllib.request, in this case).  In practice,
+        # essentially all clients do redirect in this case, so we do
+        # the same.
+
+        # Be conciliant with URIs containing a space.  This is mainly
+        # redundant with the more complete encoding done in http_error_302(),
+        # but it is kept for compatibility with other callers.
+        newurl = newurl.replace(' ', '%20')
+
+        CONTENT_HEADERS = ("content-length", "content-type")
+        newheaders = {k: v for k, v in req.headers.items()
+                      if k.lower() not in CONTENT_HEADERS}
+        return Request(newurl,
+                       method="HEAD" if m == "HEAD" else "GET",
+                       headers=newheaders,
+                       origin_req_host=req.origin_req_host,
+                       unverifiable=True)
+
+    # Implementation note: To avoid the server sending us into an
+    # infinite loop, the request object needs to track what URLs we
+    # have already seen.  Do this by adding a handler-specific
+    # attribute to the Request object.
+    def http_error_302(self, req, fp, code, msg, headers):
+        # Some servers (incorrectly) return multiple Location headers
+        # (so probably same goes for URI).  Use first header.
+        if "location" in headers:
+            newurl = headers["location"]
+        elif "uri" in headers:
+            newurl = headers["uri"]
+        else:
+            return
+
+        # fix a possible malformed URL
+        urlparts = urlparse(newurl)
+
+        # For security reasons we don't allow redirection to anything other
+        # than http, https or ftp.
+
+        if urlparts.scheme not in ('http', 'https', 'ftp', ''):
+            raise HTTPError(
+                newurl, code,
+                "%s - Redirection to url '%s' is not allowed" % (msg, newurl),
+                headers, fp)
+
+        if not urlparts.path and urlparts.netloc:
+            urlparts = list(urlparts)
+            urlparts[2] = "/"
+        newurl = urlunparse(urlparts)
+
+        # http.client.parse_headers() decodes as ISO-8859-1.  Recover the
+        # original bytes and percent-encode non-ASCII bytes, and any special
+        # characters such as the space.
+        newurl = quote(
+            newurl, encoding="iso-8859-1", safe=string.punctuation)
+        newurl = urljoin(req.full_url, newurl)
+
+        # XXX Probably want to forget about the state of the current
+        # request, although that might interact poorly with other
+        # handlers that also use handler-specific request attributes
+        new = self.redirect_request(req, fp, code, msg, headers, newurl)
+        if new is None:
+            return
+
+        # loop detection
+        # .redirect_dict has a key url if url was previously visited.
+        if hasattr(req, 'redirect_dict'):
+            visited = new.redirect_dict = req.redirect_dict
+            if (visited.get(newurl, 0) >= self.max_repeats or
+                len(visited) >= self.max_redirections):
+                raise HTTPError(req.full_url, code,
+                                self.inf_msg + msg, headers, fp)
+        else:
+            visited = new.redirect_dict = req.redirect_dict = {}
+        visited[newurl] = visited.get(newurl, 0) + 1
+
+        # Don't close the fp until we are sure that we won't use it
+        # with HTTPError.
+        fp.read()
+        fp.close()
+
+        return self.parent.open(new, timeout=req.timeout)
+
+    http_error_301 = http_error_303 = http_error_307 = http_error_308 = http_error_302
+
+    inf_msg = "The HTTP server returned a redirect error that would " \
+              "lead to an infinite loop.\n" \
+              "The last 30x error message was:\n"
+
+
+def _parse_proxy(proxy):
+    """Return (scheme, user, password, host/port) given a URL or an authority.
+
+    If a URL is supplied, it must have an authority (host:port) component.
+    According to RFC 3986, having an authority component means the URL must
+    have two slashes after the scheme.
+    """
+    scheme, r_scheme = _splittype(proxy)
+    if not r_scheme.startswith("/"):
+        # authority
+        scheme = None
+        authority = proxy
+    else:
+        # URL
+        if not r_scheme.startswith("//"):
+            raise ValueError("proxy URL with no authority: %r" % proxy)
+        # We have an authority, so for RFC 3986-compliant URLs (by ss 3.
+        # and 3.3.), path is empty or starts with '/'
+        if '@' in r_scheme:
+            host_separator = r_scheme.find('@')
+            end = r_scheme.find("/", host_separator)
+        else:
+            end = r_scheme.find("/", 2)
+        if end == -1:
+            end = None
+        authority = r_scheme[2:end]
+    userinfo, hostport = _splituser(authority)
+    if userinfo is not None:
+        user, password = _splitpasswd(userinfo)
+    else:
+        user = password = None
+    return scheme, user, password, hostport
+
+class ProxyHandler(BaseHandler):
+    # Proxies must be in front
+    handler_order = 100
+
+    def __init__(self, proxies=None):
+        if proxies is None:
+            proxies = getproxies()
+        assert hasattr(proxies, 'keys'), "proxies must be a mapping"
+        self.proxies = proxies
+        for type, url in proxies.items():
+            type = type.lower()
+            setattr(self, '%s_open' % type,
+                    lambda r, proxy=url, type=type, meth=self.proxy_open:
+                        meth(r, proxy, type))
+
+    def proxy_open(self, req, proxy, type):
+        orig_type = req.type
+        proxy_type, user, password, hostport = _parse_proxy(proxy)
+        if proxy_type is None:
+            proxy_type = orig_type
+
+        if req.host and proxy_bypass(req.host):
+            return None
+
+        if user and password:
+            user_pass = '%s:%s' % (unquote(user),
+                                   unquote(password))
+            creds = base64.b64encode(user_pass.encode()).decode("ascii")
+            req.add_header('Proxy-authorization', 'Basic ' + creds)
+        hostport = unquote(hostport)
+        req.set_proxy(hostport, proxy_type)
+        if orig_type == proxy_type or orig_type == 'https':
+            # let other handlers take care of it
+            return None
+        else:
+            # need to start over, because the other handlers don't
+            # grok the proxy's URL type
+            # e.g. if we have a constructor arg proxies like so:
+            # {'http': 'ftp://proxy.example.com'}, we may end up turning
+            # a request for http://acme.example.com/a into one for
+            # ftp://proxy.example.com/a
+            return self.parent.open(req, timeout=req.timeout)
+
+class HTTPPasswordMgr:
+
+    def __init__(self):
+        self.passwd = {}
+
+    def add_password(self, realm, uri, user, passwd):
+        # uri could be a single URI or a sequence
+        if isinstance(uri, str):
+            uri = [uri]
+        if realm not in self.passwd:
+            self.passwd[realm] = {}
+        for default_port in True, False:
+            reduced_uri = tuple(
+                self.reduce_uri(u, default_port) for u in uri)
+            self.passwd[realm][reduced_uri] = (user, passwd)
+
+    def find_user_password(self, realm, authuri):
+        domains = self.passwd.get(realm, {})
+        for default_port in True, False:
+            reduced_authuri = self.reduce_uri(authuri, default_port)
+            for uris, authinfo in domains.items():
+                for uri in uris:
+                    if self.is_suburi(uri, reduced_authuri):
+                        return authinfo
+        return None, None
+
+    def reduce_uri(self, uri, default_port=True):
+        """Accept authority or URI and extract only the authority and path."""
+        # note HTTP URLs do not have a userinfo component
+        parts = urlsplit(uri)
+        if parts[1]:
+            # URI
+            scheme = parts[0]
+            authority = parts[1]
+            path = parts[2] or '/'
+        else:
+            # host or host:port
+            scheme = None
+            authority = uri
+            path = '/'
+        host, port = _splitport(authority)
+        if default_port and port is None and scheme is not None:
+            dport = {"http": 80,
+                     "https": 443,
+                     }.get(scheme)
+            if dport is not None:
+                authority = "%s:%d" % (host, dport)
+        return authority, path
+
+    def is_suburi(self, base, test):
+        """Check if test is below base in a URI tree
+
+        Both args must be URIs in reduced form.
+        """
+        if base == test:
+            return True
+        if base[0] != test[0]:
+            return False
+        prefix = base[1]
+        if prefix[-1:] != '/':
+            prefix += '/'
+        return test[1].startswith(prefix)
+
+
+class HTTPPasswordMgrWithDefaultRealm(HTTPPasswordMgr):
+
+    def find_user_password(self, realm, authuri):
+        user, password = HTTPPasswordMgr.find_user_password(self, realm,
+                                                            authuri)
+        if user is not None:
+            return user, password
+        return HTTPPasswordMgr.find_user_password(self, None, authuri)
+
+
+class HTTPPasswordMgrWithPriorAuth(HTTPPasswordMgrWithDefaultRealm):
+
+    def __init__(self):
+        self.authenticated = {}
+        super().__init__()
+
+    def add_password(self, realm, uri, user, passwd, is_authenticated=False):
+        self.update_authenticated(uri, is_authenticated)
+        # Add a default for prior auth requests
+        if realm is not None:
+            super().add_password(None, uri, user, passwd)
+        super().add_password(realm, uri, user, passwd)
+
+    def update_authenticated(self, uri, is_authenticated=False):
+        # uri could be a single URI or a sequence
+        if isinstance(uri, str):
+            uri = [uri]
+
+        for default_port in True, False:
+            for u in uri:
+                reduced_uri = self.reduce_uri(u, default_port)
+                self.authenticated[reduced_uri] = is_authenticated
+
+    def is_authenticated(self, authuri):
+        for default_port in True, False:
+            reduced_authuri = self.reduce_uri(authuri, default_port)
+            for uri in self.authenticated:
+                if self.is_suburi(uri, reduced_authuri):
+                    return self.authenticated[uri]
+
+
+class AbstractBasicAuthHandler:
+
+    # XXX this allows for multiple auth-schemes, but will stupidly pick
+    # the last one with a realm specified.
+
+    # allow for double- and single-quoted realm values
+    # (single quotes are a violation of the RFC, but appear in the wild)
+    rx = re.compile('(?:^|,)'   # start of the string or ','
+                    '[ \t]*'    # optional whitespaces
+                    '([^ \t,]+)' # scheme like "Basic"
+                    '[ \t]+'    # mandatory whitespaces
+                    # realm=xxx
+                    # realm='xxx'
+                    # realm="xxx"
+                    'realm=(["\']?)([^"\']*)\\2',
+                    re.I)
+
+    # XXX could pre-emptively send auth info already accepted (RFC 2617,
+    # end of section 2, and section 1.2 immediately after "credentials"
+    # production).
+
+    def __init__(self, password_mgr=None):
+        if password_mgr is None:
+            password_mgr = HTTPPasswordMgr()
+        self.passwd = password_mgr
+        self.add_password = self.passwd.add_password
+
+    def _parse_realm(self, header):
+        # parse WWW-Authenticate header: accept multiple challenges per header
+        found_challenge = False
+        for mo in AbstractBasicAuthHandler.rx.finditer(header):
+            scheme, quote, realm = mo.groups()
+            if quote not in ['"', "'"]:
+                import warnings
+                warnings.warn("Basic Auth Realm was unquoted",
+                              UserWarning, 3)
+
+            yield (scheme, realm)
+
+            found_challenge = True
+
+        if not found_challenge:
+            if header:
+                scheme = header.split()[0]
+            else:
+                scheme = ''
+            yield (scheme, None)
+
+    def http_error_auth_reqed(self, authreq, host, req, headers):
+        # host may be an authority (without userinfo) or a URL with an
+        # authority
+        headers = headers.get_all(authreq)
+        if not headers:
+            # no header found
+            return
+
+        unsupported = None
+        for header in headers:
+            for scheme, realm in self._parse_realm(header):
+                if scheme.lower() != 'basic':
+                    unsupported = scheme
+                    continue
+
+                if realm is not None:
+                    # Use the first matching Basic challenge.
+                    # Ignore following challenges even if they use the Basic
+                    # scheme.
+                    return self.retry_http_basic_auth(host, req, realm)
+
+        if unsupported is not None:
+            raise ValueError("AbstractBasicAuthHandler does not "
+                             "support the following scheme: %r"
+                             % (scheme,))
+
+    def retry_http_basic_auth(self, host, req, realm):
+        user, pw = self.passwd.find_user_password(realm, host)
+        if pw is not None:
+            raw = "%s:%s" % (user, pw)
+            auth = "Basic " + base64.b64encode(raw.encode()).decode("ascii")
+            if req.get_header(self.auth_header, None) == auth:
+                return None
+            req.add_unredirected_header(self.auth_header, auth)
+            return self.parent.open(req, timeout=req.timeout)
+        else:
+            return None
+
+    def http_request(self, req):
+        if (not hasattr(self.passwd, 'is_authenticated') or
+           not self.passwd.is_authenticated(req.full_url)):
+            return req
+
+        if not req.has_header('Authorization'):
+            user, passwd = self.passwd.find_user_password(None, req.full_url)
+            credentials = '{0}:{1}'.format(user, passwd).encode()
+            auth_str = base64.standard_b64encode(credentials).decode()
+            req.add_unredirected_header('Authorization',
+                                        'Basic {}'.format(auth_str.strip()))
+        return req
+
+    def http_response(self, req, response):
+        if hasattr(self.passwd, 'is_authenticated'):
+            if 200 <= response.code < 300:
+                self.passwd.update_authenticated(req.full_url, True)
+            else:
+                self.passwd.update_authenticated(req.full_url, False)
+        return response
+
+    https_request = http_request
+    https_response = http_response
+
+
+
+class HTTPBasicAuthHandler(AbstractBasicAuthHandler, BaseHandler):
+
+    auth_header = 'Authorization'
+
+    def http_error_401(self, req, fp, code, msg, headers):
+        url = req.full_url
+        response = self.http_error_auth_reqed('www-authenticate',
+                                          url, req, headers)
+        return response
+
+
+class ProxyBasicAuthHandler(AbstractBasicAuthHandler, BaseHandler):
+
+    auth_header = 'Proxy-authorization'
+
+    def http_error_407(self, req, fp, code, msg, headers):
+        # http_error_auth_reqed requires that there is no userinfo component in
+        # authority.  Assume there isn't one, since urllib.request does not (and
+        # should not, RFC 3986 s. 3.2.1) support requests for URLs containing
+        # userinfo.
+        authority = req.host
+        response = self.http_error_auth_reqed('proxy-authenticate',
+                                          authority, req, headers)
+        return response
+
+
+# Return n random bytes.
+_randombytes = os.urandom
+
+
+class AbstractDigestAuthHandler:
+    # Digest authentication is specified in RFC 2617/7616.
+
+    # XXX The client does not inspect the Authentication-Info header
+    # in a successful response.
+
+    # XXX It should be possible to test this implementation against
+    # a mock server that just generates a static set of challenges.
+
+    # XXX qop="auth-int" supports is shaky
+
+    def __init__(self, passwd=None):
+        if passwd is None:
+            passwd = HTTPPasswordMgr()
+        self.passwd = passwd
+        self.add_password = self.passwd.add_password
+        self.retried = 0
+        self.nonce_count = 0
+        self.last_nonce = None
+
+    def reset_retry_count(self):
+        self.retried = 0
+
+    def http_error_auth_reqed(self, auth_header, host, req, headers):
+        authreq = headers.get(auth_header, None)
+        if self.retried > 5:
+            # Don't fail endlessly - if we failed once, we'll probably
+            # fail a second time. Hm. Unless the Password Manager is
+            # prompting for the information. Crap. This isn't great
+            # but it's better than the current 'repeat until recursion
+            # depth exceeded' approach <wink>
+            raise HTTPError(req.full_url, 401, "digest auth failed",
+                            headers, None)
+        else:
+            self.retried += 1
+        if authreq:
+            scheme = authreq.split()[0]
+            if scheme.lower() == 'digest':
+                return self.retry_http_digest_auth(req, authreq)
+            elif scheme.lower() != 'basic':
+                raise ValueError("AbstractDigestAuthHandler does not support"
+                                 " the following scheme: '%s'" % scheme)
+
+    def retry_http_digest_auth(self, req, auth):
+        token, challenge = auth.split(' ', 1)
+        chal = parse_keqv_list(filter(None, parse_http_list(challenge)))
+        auth = self.get_authorization(req, chal)
+        if auth:
+            auth_val = 'Digest %s' % auth
+            if req.headers.get(self.auth_header, None) == auth_val:
+                return None
+            req.add_unredirected_header(self.auth_header, auth_val)
+            resp = self.parent.open(req, timeout=req.timeout)
+            return resp
+
+    def get_cnonce(self, nonce):
+        # The cnonce-value is an opaque
+        # quoted string value provided by the client and used by both client
+        # and server to avoid chosen plaintext attacks, to provide mutual
+        # authentication, and to provide some message integrity protection.
+        # This isn't a fabulous effort, but it's probably Good Enough.
+        s = "%s:%s:%s:" % (self.nonce_count, nonce, time.ctime())
+        b = s.encode("ascii") + _randombytes(8)
+        dig = hashlib.sha1(b).hexdigest()
+        return dig[:16]
+
+    def get_authorization(self, req, chal):
+        try:
+            realm = chal['realm']
+            nonce = chal['nonce']
+            qop = chal.get('qop')
+            algorithm = chal.get('algorithm', 'MD5')
+            # mod_digest doesn't send an opaque, even though it isn't
+            # supposed to be optional
+            opaque = chal.get('opaque', None)
+        except KeyError:
+            return None
+
+        H, KD = self.get_algorithm_impls(algorithm)
+        if H is None:
+            return None
+
+        user, pw = self.passwd.find_user_password(realm, req.full_url)
+        if user is None:
+            return None
+
+        # XXX not implemented yet
+        if req.data is not None:
+            entdig = self.get_entity_digest(req.data, chal)
+        else:
+            entdig = None
+
+        A1 = "%s:%s:%s" % (user, realm, pw)
+        A2 = "%s:%s" % (req.get_method(),
+                        # XXX selector: what about proxies and full urls
+                        req.selector)
+        # NOTE: As per  RFC 2617, when server sends "auth,auth-int", the client could use either `auth`
+        #     or `auth-int` to the response back. we use `auth` to send the response back.
+        if qop is None:
+            respdig = KD(H(A1), "%s:%s" % (nonce, H(A2)))
+        elif 'auth' in qop.split(','):
+            if nonce == self.last_nonce:
+                self.nonce_count += 1
+            else:
+                self.nonce_count = 1
+                self.last_nonce = nonce
+            ncvalue = '%08x' % self.nonce_count
+            cnonce = self.get_cnonce(nonce)
+            noncebit = "%s:%s:%s:%s:%s" % (nonce, ncvalue, cnonce, 'auth', H(A2))
+            respdig = KD(H(A1), noncebit)
+        else:
+            # XXX handle auth-int.
+            raise URLError("qop '%s' is not supported." % qop)
+
+        # XXX should the partial digests be encoded too?
+
+        base = 'username="%s", realm="%s", nonce="%s", uri="%s", ' \
+               'response="%s"' % (user, realm, nonce, req.selector,
+                                  respdig)
+        if opaque:
+            base += ', opaque="%s"' % opaque
+        if entdig:
+            base += ', digest="%s"' % entdig
+        base += ', algorithm="%s"' % algorithm
+        if qop:
+            base += ', qop=auth, nc=%s, cnonce="%s"' % (ncvalue, cnonce)
+        return base
+
+    def get_algorithm_impls(self, algorithm):
+        # algorithm names taken from RFC 7616 Section 6.1
+        # lambdas assume digest modules are imported at the top level
+        if algorithm == 'MD5':
+            H = lambda x: hashlib.md5(x.encode("ascii")).hexdigest()
+        elif algorithm == 'SHA':  # non-standard, retained for compatibility.
+            H = lambda x: hashlib.sha1(x.encode("ascii")).hexdigest()
+        elif algorithm == 'SHA-256':
+            H = lambda x: hashlib.sha256(x.encode("ascii")).hexdigest()
+        # XXX MD5-sess
+        else:
+            raise ValueError("Unsupported digest authentication "
+                             "algorithm %r" % algorithm)
+        KD = lambda s, d: H("%s:%s" % (s, d))
+        return H, KD
+
+    def get_entity_digest(self, data, chal):
+        # XXX not implemented yet
+        return None
+
+
+class HTTPDigestAuthHandler(BaseHandler, AbstractDigestAuthHandler):
+    """An authentication protocol defined by RFC 2069
+
+    Digest authentication improves on basic authentication because it
+    does not transmit passwords in the clear.
+    """
+
+    auth_header = 'Authorization'
+    handler_order = 490  # before Basic auth
+
+    def http_error_401(self, req, fp, code, msg, headers):
+        host = urlparse(req.full_url)[1]
+        retry = self.http_error_auth_reqed('www-authenticate',
+                                           host, req, headers)
+        self.reset_retry_count()
+        return retry
+
+
+class ProxyDigestAuthHandler(BaseHandler, AbstractDigestAuthHandler):
+
+    auth_header = 'Proxy-Authorization'
+    handler_order = 490  # before Basic auth
+
+    def http_error_407(self, req, fp, code, msg, headers):
+        host = req.host
+        retry = self.http_error_auth_reqed('proxy-authenticate',
+                                           host, req, headers)
+        self.reset_retry_count()
+        return retry
+
+class AbstractHTTPHandler(BaseHandler):
+
+    def __init__(self, debuglevel=None):
+        self._debuglevel = debuglevel if debuglevel is not None else http.client.HTTPConnection.debuglevel
+
+    def set_http_debuglevel(self, level):
+        self._debuglevel = level
+
+    def _get_content_length(self, request):
+        return http.client.HTTPConnection._get_content_length(
+            request.data,
+            request.get_method())
+
+    def do_request_(self, request):
+        host = request.host
+        if not host:
+            raise URLError('no host given')
+
+        if request.data is not None:  # POST
+            data = request.data
+            if isinstance(data, str):
+                msg = "POST data should be bytes, an iterable of bytes, " \
+                      "or a file object. It cannot be of type str."
+                raise TypeError(msg)
+            if not request.has_header('Content-type'):
+                request.add_unredirected_header(
+                    'Content-type',
+                    'application/x-www-form-urlencoded')
+            if (not request.has_header('Content-length')
+                    and not request.has_header('Transfer-encoding')):
+                content_length = self._get_content_length(request)
+                if content_length is not None:
+                    request.add_unredirected_header(
+                            'Content-length', str(content_length))
+                else:
+                    request.add_unredirected_header(
+                            'Transfer-encoding', 'chunked')
+
+        sel_host = host
+        if request.has_proxy():
+            scheme, sel = _splittype(request.selector)
+            sel_host, sel_path = _splithost(sel)
+        if not request.has_header('Host'):
+            request.add_unredirected_header('Host', sel_host)
+        for name, value in self.parent.addheaders:
+            name = name.capitalize()
+            if not request.has_header(name):
+                request.add_unredirected_header(name, value)
+
+        return request
+
+    def do_open(self, http_class, req, **http_conn_args):
+        """Return an HTTPResponse object for the request, using http_class.
+
+        http_class must implement the HTTPConnection API from http.client.
+        """
+        host = req.host
+        if not host:
+            raise URLError('no host given')
+
+        # will parse host:port
+        h = http_class(host, timeout=req.timeout, **http_conn_args)
+        h.set_debuglevel(self._debuglevel)
+
+        headers = dict(req.unredirected_hdrs)
+        headers.update({k: v for k, v in req.headers.items()
+                        if k not in headers})
+
+        # TODO(jhylton): Should this be redesigned to handle
+        # persistent connections?
+
+        # We want to make an HTTP/1.1 request, but the addinfourl
+        # class isn't prepared to deal with a persistent connection.
+        # It will try to read all remaining data from the socket,
+        # which will block while the server waits for the next request.
+        # So make sure the connection gets closed after the (only)
+        # request.
+        headers["Connection"] = "close"
+        headers = {name.title(): val for name, val in headers.items()}
+
+        if req._tunnel_host:
+            tunnel_headers = {}
+            proxy_auth_hdr = "Proxy-Authorization"
+            if proxy_auth_hdr in headers:
+                tunnel_headers[proxy_auth_hdr] = headers[proxy_auth_hdr]
+                # Proxy-Authorization should not be sent to origin
+                # server.
+                del headers[proxy_auth_hdr]
+            h.set_tunnel(req._tunnel_host, headers=tunnel_headers)
+
+        try:
+            try:
+                h.request(req.get_method(), req.selector, req.data, headers,
+                          encode_chunked=req.has_header('Transfer-encoding'))
+            except OSError as err: # timeout error
+                raise URLError(err)
+            r = h.getresponse()
+        except:
+            h.close()
+            raise
+
+        # If the server does not send us a 'Connection: close' header,
+        # HTTPConnection assumes the socket should be left open. Manually
+        # mark the socket to be closed when this response object goes away.
+        if h.sock:
+            h.sock.close()
+            h.sock = None
+
+        r.url = req.get_full_url()
+        # This line replaces the .msg attribute of the HTTPResponse
+        # with .headers, because urllib clients expect the response to
+        # have the reason in .msg.  It would be good to mark this
+        # attribute is deprecated and get then to use info() or
+        # .headers.
+        r.msg = r.reason
+        return r
+
+
+class HTTPHandler(AbstractHTTPHandler):
+
+    def http_open(self, req):
+        return self.do_open(http.client.HTTPConnection, req)
+
+    http_request = AbstractHTTPHandler.do_request_
+
+if hasattr(http.client, 'HTTPSConnection'):
+
+    class HTTPSHandler(AbstractHTTPHandler):
+
+        def __init__(self, debuglevel=None, context=None, check_hostname=None):
+            debuglevel = debuglevel if debuglevel is not None else http.client.HTTPSConnection.debuglevel
+            AbstractHTTPHandler.__init__(self, debuglevel)
+            if context is None:
+                http_version = http.client.HTTPSConnection._http_vsn
+                context = http.client._create_https_context(http_version)
+            if check_hostname is not None:
+                context.check_hostname = check_hostname
+            self._context = context
+
+        def https_open(self, req):
+            return self.do_open(http.client.HTTPSConnection, req,
+                                context=self._context)
+
+        https_request = AbstractHTTPHandler.do_request_
+
+    __all__.append('HTTPSHandler')
+
+class HTTPCookieProcessor(BaseHandler):
+    def __init__(self, cookiejar=None):
+        import http.cookiejar
+        if cookiejar is None:
+            cookiejar = http.cookiejar.CookieJar()
+        self.cookiejar = cookiejar
+
+    def http_request(self, request):
+        self.cookiejar.add_cookie_header(request)
+        return request
+
+    def http_response(self, request, response):
+        self.cookiejar.extract_cookies(response, request)
+        return response
+
+    https_request = http_request
+    https_response = http_response
+
+class UnknownHandler(BaseHandler):
+    def unknown_open(self, req):
+        type = req.type
+        raise URLError('unknown url type: %s' % type)
+
+def parse_keqv_list(l):
+    """Parse list of key=value strings where keys are not duplicated."""
+    parsed = {}
+    for elt in l:
+        k, v = elt.split('=', 1)
+        if v[0] == '"' and v[-1] == '"':
+            v = v[1:-1]
+        parsed[k] = v
+    return parsed
+
+def parse_http_list(s):
+    """Parse lists as described by RFC 2068 Section 2.
+
+    In particular, parse comma-separated lists where the elements of
+    the list may include quoted-strings.  A quoted-string could
+    contain a comma.  A non-quoted string could have quotes in the
+    middle.  Neither commas nor quotes count if they are escaped.
+    Only double-quotes count, not single-quotes.
+    """
+    res = []
+    part = ''
+
+    escape = quote = False
+    for cur in s:
+        if escape:
+            part += cur
+            escape = False
+            continue
+        if quote:
+            if cur == '\\':
+                escape = True
+                continue
+            elif cur == '"':
+                quote = False
+            part += cur
+            continue
+
+        if cur == ',':
+            res.append(part)
+            part = ''
+            continue
+
+        if cur == '"':
+            quote = True
+
+        part += cur
+
+    # append last part
+    if part:
+        res.append(part)
+
+    return [part.strip() for part in res]
+
+class FileHandler(BaseHandler):
+    # names for the localhost
+    names = None
+    def get_names(self):
+        if FileHandler.names is None:
+            try:
+                FileHandler.names = tuple(
+                    socket.gethostbyname_ex('localhost')[2] +
+                    socket.gethostbyname_ex(socket.gethostname())[2])
+            except socket.gaierror:
+                FileHandler.names = (socket.gethostbyname('localhost'),)
+        return FileHandler.names
+
+    # not entirely sure what the rules are here
+    def open_local_file(self, req):
+        import email.utils
+        import mimetypes
+        localfile = url2pathname(req.full_url, require_scheme=True, resolve_host=True)
+        try:
+            stats = os.stat(localfile)
+            size = stats.st_size
+            modified = email.utils.formatdate(stats.st_mtime, usegmt=True)
+            mtype = mimetypes.guess_file_type(localfile)[0]
+            headers = email.message_from_string(
+                'Content-type: %s\nContent-length: %d\nLast-modified: %s\n' %
+                (mtype or 'text/plain', size, modified))
+            origurl = pathname2url(localfile, add_scheme=True)
+            return addinfourl(open(localfile, 'rb'), headers, origurl)
+        except OSError as exp:
+            raise URLError(exp, exp.filename)
+
+    file_open = open_local_file
+
+def _is_local_authority(authority, resolve):
+    # Compare hostnames
+    if not authority or authority == 'localhost':
+        return True
+    try:
+        hostname = socket.gethostname()
+    except (socket.gaierror, AttributeError):
+        pass
+    else:
+        if authority == hostname:
+            return True
+    # Compare IP addresses
+    if not resolve:
+        return False
+    try:
+        address = socket.gethostbyname(authority)
+    except (socket.gaierror, AttributeError, UnicodeEncodeError):
+        return False
+    return address in FileHandler().get_names()
+
+class FTPHandler(BaseHandler):
+    def ftp_open(self, req):
+        import ftplib
+        import mimetypes
+        host = req.host
+        if not host:
+            raise URLError('ftp error: no host given')
+        host, port = _splitport(host)
+        if port is None:
+            port = ftplib.FTP_PORT
+        else:
+            port = int(port)
+
+        # username/password handling
+        user, host = _splituser(host)
+        if user:
+            user, passwd = _splitpasswd(user)
+        else:
+            passwd = None
+        host = unquote(host)
+        user = user or ''
+        passwd = passwd or ''
+
+        try:
+            host = socket.gethostbyname(host)
+        except OSError as msg:
+            raise URLError(msg)
+        path, attrs = _splitattr(req.selector)
+        dirs = path.split('/')
+        dirs = list(map(unquote, dirs))
+        dirs, file = dirs[:-1], dirs[-1]
+        if dirs and not dirs[0]:
+            dirs = dirs[1:]
+        fw = None
+        try:
+            fw = self.connect_ftp(user, passwd, host, port, dirs, req.timeout)
+            type = file and 'I' or 'D'
+            for attr in attrs:
+                attr, value = _splitvalue(attr)
+                if attr.lower() == 'type' and \
+                   value in ('a', 'A', 'i', 'I', 'd', 'D'):
+                    type = value.upper()
+            fp, retrlen = fw.retrfile(file, type)
+            headers = ""
+            mtype = mimetypes.guess_type(req.full_url)[0]
+            if mtype:
+                headers += "Content-type: %s\n" % mtype
+            if retrlen is not None and retrlen >= 0:
+                headers += "Content-length: %d\n" % retrlen
+            headers = email.message_from_string(headers)
+            return addinfourl(fp, headers, req.full_url)
+        except Exception as exp:
+            if fw is not None and not fw.keepalive:
+                fw.close()
+            if isinstance(exp, ftplib.all_errors):
+                raise URLError(f"ftp error: {exp}") from exp
+            raise
+
+    def connect_ftp(self, user, passwd, host, port, dirs, timeout):
+        return ftpwrapper(user, passwd, host, port, dirs, timeout,
+                          persistent=False)
+
+class CacheFTPHandler(FTPHandler):
+    # XXX would be nice to have pluggable cache strategies
+    # XXX this stuff is definitely not thread safe
+    def __init__(self):
+        self.cache = {}
+        self.timeout = {}
+        self.soonest = 0
+        self.delay = 60
+        self.max_conns = 16
+
+    def setTimeout(self, t):
+        self.delay = t
+
+    def setMaxConns(self, m):
+        self.max_conns = m
+
+    def connect_ftp(self, user, passwd, host, port, dirs, timeout):
+        key = user, host, port, '/'.join(dirs), timeout
+        conn = self.cache.get(key)
+        if conn is None or not conn.keepalive:
+            if conn is not None:
+                conn.close()
+            conn = self.cache[key] = ftpwrapper(user, passwd, host, port,
+                                                dirs, timeout)
+        self.timeout[key] = time.time() + self.delay
+        self.check_cache()
+        return conn
+
+    def check_cache(self):
+        # first check for old ones
+        t = time.time()
+        if self.soonest <= t:
+            for k, v in list(self.timeout.items()):
+                if v < t:
+                    self.cache[k].close()
+                    del self.cache[k]
+                    del self.timeout[k]
+        self.soonest = min(list(self.timeout.values()))
+
+        # then check the size
+        if len(self.cache) == self.max_conns:
+            for k, v in list(self.timeout.items()):
+                if v == self.soonest:
+                    del self.cache[k]
+                    del self.timeout[k]
+                    break
+            self.soonest = min(list(self.timeout.values()))
+
+    def clear_cache(self):
+        for conn in self.cache.values():
+            conn.close()
+        self.cache.clear()
+        self.timeout.clear()
+
+class DataHandler(BaseHandler):
+    def data_open(self, req):
+        # data URLs as specified in RFC 2397.
+        #
+        # ignores POSTed data
+        #
+        # syntax:
+        # dataurl   := "data:" [ mediatype ] [ ";base64" ] "," data
+        # mediatype := [ type "/" subtype ] *( ";" parameter )
+        # data      := *urlchar
+        # parameter := attribute "=" value
+        url = req.full_url
+
+        scheme, data = url.split(":",1)
+        mediatype, data = data.split(",",1)
+
+        # Disallow control characters within mediatype.
+        if re.search(r"[\x00-\x1F\x7F]", mediatype):
+            raise ValueError(
+                "Control characters not allowed in data: mediatype")
+
+        # even base64 encoded data URLs might be quoted so unquote in any case:
+        data = unquote_to_bytes(data)
+        if mediatype.endswith(";base64"):
+            data = base64.decodebytes(data)
+            mediatype = mediatype[:-7]
+
+        if not mediatype:
+            mediatype = "text/plain;charset=US-ASCII"
+
+        headers = email.message_from_string("Content-type: %s\nContent-length: %d\n" %
+            (mediatype, len(data)))
+
+        return addinfourl(io.BytesIO(data), headers, url)
+
+
+# Code moved from the old urllib module
+
+def url2pathname(url, *, require_scheme=False, resolve_host=False):
+    """Convert the given file URL to a local file system path.
+
+    The 'file:' scheme prefix must be omitted unless *require_scheme*
+    is set to true.
+
+    The URL authority may be resolved with gethostbyname() if
+    *resolve_host* is set to true.
+    """
+    if not require_scheme:
+        url = 'file:' + url
+    scheme, authority, url = urlsplit(url)[:3]  # Discard query and fragment.
+    if scheme != 'file':
+        raise URLError("URL is missing a 'file:' scheme")
+    if os.name == 'nt':
+        if authority[1:2] == ':':
+            # e.g. file://c:/file.txt
+            url = authority + url
+        elif not _is_local_authority(authority, resolve_host):
+            # e.g. file://server/share/file.txt
+            url = '//' + authority + url
+        elif url[:3] == '///':
+            # e.g. file://///server/share/file.txt
+            url = url[1:]
+        else:
+            if url[:1] == '/' and url[2:3] in (':', '|'):
+                # Skip past extra slash before DOS drive in URL path.
+                url = url[1:]
+            if url[1:2] == '|':
+                # Older URLs use a pipe after a drive letter
+                url = url[:1] + ':' + url[2:]
+        url = url.replace('/', '\\')
+    elif not _is_local_authority(authority, resolve_host):
+        raise URLError("file:// scheme is supported only on localhost")
+    encoding = sys.getfilesystemencoding()
+    errors = sys.getfilesystemencodeerrors()
+    return unquote(url, encoding=encoding, errors=errors)
+
+
+def pathname2url(pathname, *, add_scheme=False):
+    """Convert the given local file system path to a file URL.
+
+    The 'file:' scheme prefix is omitted unless *add_scheme*
+    is set to true.
+    """
+    if os.name == 'nt':
+        pathname = pathname.replace('\\', '/')
+    encoding = sys.getfilesystemencoding()
+    errors = sys.getfilesystemencodeerrors()
+    scheme = 'file:' if add_scheme else ''
+    drive, root, tail = os.path.splitroot(pathname)
+    if drive:
+        # First, clean up some special forms. We are going to sacrifice the
+        # additional information anyway
+        if drive[:4] == '//?/':
+            drive = drive[4:]
+            if drive[:4].upper() == 'UNC/':
+                drive = '//' + drive[4:]
+        if drive[1:] == ':':
+            # DOS drive specified. Add three slashes to the start, producing
+            # an authority section with a zero-length authority, and a path
+            # section starting with a single slash.
+            drive = '///' + drive
+        drive = quote(drive, encoding=encoding, errors=errors, safe='/:')
+    elif root:
+        # Add explicitly empty authority to absolute path. If the path
+        # starts with exactly one slash then this change is mostly
+        # cosmetic, but if it begins with two or more slashes then this
+        # avoids interpreting the path as a URL authority.
+        root = '//' + root
+    tail = quote(tail, encoding=encoding, errors=errors)
+    return scheme + drive + root + tail
+
+
+# Utility functions
+
+_localhost = None
+def localhost():
+    """Return the IP address of the magic hostname 'localhost'."""
+    global _localhost
+    if _localhost is None:
+        _localhost = socket.gethostbyname('localhost')
+    return _localhost
+
+_thishost = None
+def thishost():
+    """Return the IP addresses of the current host."""
+    global _thishost
+    if _thishost is None:
+        try:
+            _thishost = tuple(socket.gethostbyname_ex(socket.gethostname())[2])
+        except socket.gaierror:
+            _thishost = tuple(socket.gethostbyname_ex('localhost')[2])
+    return _thishost
+
+_ftperrors = None
+def ftperrors():
+    """Return the set of errors raised by the FTP class."""
+    global _ftperrors
+    if _ftperrors is None:
+        import ftplib
+        _ftperrors = ftplib.all_errors
+    return _ftperrors
+
+_noheaders = None
+def noheaders():
+    """Return an empty email Message object."""
+    global _noheaders
+    if _noheaders is None:
+        _noheaders = email.message_from_string("")
+    return _noheaders
+
+
+# Utility classes
+
+class ftpwrapper:
+    """Class used by open_ftp() for cache of open FTP connections."""
+
+    def __init__(self, user, passwd, host, port, dirs, timeout=None,
+                 persistent=True):
+        self.user = user
+        self.passwd = passwd
+        self.host = host
+        self.port = port
+        self.dirs = dirs
+        self.timeout = timeout
+        self.refcount = 0
+        self.keepalive = persistent
+        try:
+            self.init()
+        except:
+            self.close()
+            raise
+
+    def init(self):
+        import ftplib
+        self.busy = 0
+        self.ftp = ftplib.FTP()
+        self.ftp.connect(self.host, self.port, self.timeout)
+        self.ftp.login(self.user, self.passwd)
+        _target = '/'.join(self.dirs)
+        self.ftp.cwd(_target)
+
+    def retrfile(self, file, type):
+        import ftplib
+        self.endtransfer()
+        if type in ('d', 'D'): cmd = 'TYPE A'; isdir = 1
+        else: cmd = 'TYPE ' + type; isdir = 0
+        try:
+            self.ftp.voidcmd(cmd)
+        except ftplib.all_errors:
+            self.init()
+            self.ftp.voidcmd(cmd)
+        conn = None
+        if file and not isdir:
+            # Try to retrieve as a file
+            try:
+                cmd = 'RETR ' + file
+                conn, retrlen = self.ftp.ntransfercmd(cmd)
+            except ftplib.error_perm as reason:
+                if str(reason)[:3] != '550':
+                    raise URLError(f'ftp error: {reason}') from reason
+        if not conn:
+            # Set transfer mode to ASCII!
+            self.ftp.voidcmd('TYPE A')
+            # Try a directory listing. Verify that directory exists.
+            if file:
+                pwd = self.ftp.pwd()
+                try:
+                    try:
+                        self.ftp.cwd(file)
+                    except ftplib.error_perm as reason:
+                        raise URLError('ftp error: %r' % reason) from reason
+                finally:
+                    self.ftp.cwd(pwd)
+                cmd = 'LIST ' + file
+            else:
+                cmd = 'LIST'
+            conn, retrlen = self.ftp.ntransfercmd(cmd)
+        self.busy = 1
+
+        ftpobj = addclosehook(conn.makefile('rb'), self.file_close)
+        self.refcount += 1
+        conn.close()
+        # Pass back both a suitably decorated object and a retrieval length
+        return (ftpobj, retrlen)
+
+    def endtransfer(self):
+        if not self.busy:
+            return
+        self.busy = 0
+        try:
+            self.ftp.voidresp()
+        except ftperrors():
+            pass
+
+    def close(self):
+        self.keepalive = False
+        if self.refcount <= 0:
+            self.real_close()
+
+    def file_close(self):
+        self.endtransfer()
+        self.refcount -= 1
+        if self.refcount <= 0 and not self.keepalive:
+            self.real_close()
+
+    def real_close(self):
+        self.endtransfer()
+        try:
+            self.ftp.close()
+        except ftperrors():
+            pass
+
+# Proxy handling
+def getproxies_environment():
+    """Return a dictionary of scheme -> proxy server URL mappings.
+
+    Scan the environment for variables named <scheme>_proxy;
+    this seems to be the standard convention.
+    """
+    # in order to prefer lowercase variables, process environment in
+    # two passes: first matches any, second pass matches lowercase only
+
+    # select only environment variables which end in (after making lowercase) _proxy
+    proxies = {}
+    environment = []
+    for name in os.environ:
+        # fast screen underscore position before more expensive case-folding
+        if len(name) > 5 and name[-6] == "_" and name[-5:].lower() == "proxy":
+            value = os.environ[name]
+            proxy_name = name[:-6].lower()
+            environment.append((name, value, proxy_name))
+            if value:
+                proxies[proxy_name] = value
+    # CVE-2016-1000110 - If we are running as CGI script, forget HTTP_PROXY
+    # (non-all-lowercase) as it may be set from the web server by a "Proxy:"
+    # header from the client
+    # If "proxy" is lowercase, it will still be used thanks to the next block
+    if 'REQUEST_METHOD' in os.environ:
+        proxies.pop('http', None)
+    for name, value, proxy_name in environment:
+        # not case-folded, checking here for lower-case env vars only
+        if name[-6:] == '_proxy':
+            if value:
+                proxies[proxy_name] = value
+            else:
+                proxies.pop(proxy_name, None)
+    return proxies
+
+def proxy_bypass_environment(host, proxies=None):
+    """Test if proxies should not be used for a particular host.
+
+    Checks the proxy dict for the value of no_proxy, which should
+    be a list of comma separated DNS suffixes, or '*' for all hosts.
+
+    """
+    if proxies is None:
+        proxies = getproxies_environment()
+    # don't bypass, if no_proxy isn't specified
+    try:
+        no_proxy = proxies['no']
+    except KeyError:
+        return False
+    # '*' is special case for always bypass
+    if no_proxy == '*':
+        return True
+    host = host.lower()
+    # strip port off host
+    hostonly, port = _splitport(host)
+    # check if the host ends with any of the DNS suffixes
+    for name in no_proxy.split(','):
+        name = name.strip()
+        if name:
+            name = name.lstrip('.')  # ignore leading dots
+            name = name.lower()
+            if hostonly == name or host == name:
+                return True
+            name = '.' + name
+            if hostonly.endswith(name) or host.endswith(name):
+                return True
+    # otherwise, don't bypass
+    return False
+
+
+# This code tests an OSX specific data structure but is testable on all
+# platforms
+def _proxy_bypass_macosx_sysconf(host, proxy_settings):
+    """
+    Return True iff this host shouldn't be accessed using a proxy
+
+    This function uses the MacOSX framework SystemConfiguration
+    to fetch the proxy information.
+
+    proxy_settings come from _scproxy._get_proxy_settings or get mocked ie:
+    { 'exclude_simple': bool,
+      'exceptions': ['foo.bar', '*.bar.com', '127.0.0.1', '10.1', '10.0/16']
+    }
+    """
+    from fnmatch import fnmatch
+    from ipaddress import AddressValueError, IPv4Address
+
+    hostonly, port = _splitport(host)
+
+    def ip2num(ipAddr):
+        parts = ipAddr.split('.')
+        parts = list(map(int, parts))
+        if len(parts) != 4:
+            parts = (parts + [0, 0, 0, 0])[:4]
+        return (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8) | parts[3]
+
+    # Check for simple host names:
+    if '.' not in host:
+        if proxy_settings['exclude_simple']:
+            return True
+
+    hostIP = None
+    try:
+        hostIP = int(IPv4Address(hostonly))
+    except AddressValueError:
+        pass
+
+    for value in proxy_settings.get('exceptions', ()):
+        # Items in the list are strings like these: *.local, 169.254/16
+        if not value: continue
+
+        m = re.match(r"(\d+(?:\.\d+)*)(/\d+)?", value)
+        if m is not None and hostIP is not None:
+            base = ip2num(m.group(1))
+            mask = m.group(2)
+            if mask is None:
+                mask = 8 * (m.group(1).count('.') + 1)
+            else:
+                mask = int(mask[1:])
+
+            if mask < 0 or mask > 32:
+                # System libraries ignore invalid prefix lengths
+                continue
+
+            mask = 32 - mask
+
+            if (hostIP >> mask) == (base >> mask):
+                return True
+
+        elif fnmatch(host, value):
+            return True
+
+    return False
+
+
+# Same as _proxy_bypass_macosx_sysconf, testable on all platforms
+def _proxy_bypass_winreg_override(host, override):
+    """Return True if the host should bypass the proxy server.
+
+    The proxy override list is obtained from the Windows
+    Internet settings proxy override registry value.
+
+    An example of a proxy override value is:
+    "www.example.com;*.example.net; 192.168.0.1"
+    """
+    from fnmatch import fnmatch
+
+    host, _ = _splitport(host)
+    proxy_override = override.split(';')
+    for test in proxy_override:
+        test = test.strip()
+        # "<local>" should bypass the proxy server for all intranet addresses
+        if test == '<local>':
+            if '.' not in host:
+                return True
+        elif fnmatch(host, test):
+            return True
+    return False
+
+
+if sys.platform == 'darwin':
+    from _scproxy import _get_proxy_settings, _get_proxies
+
+    def proxy_bypass_macosx_sysconf(host):
+        proxy_settings = _get_proxy_settings()
+        return _proxy_bypass_macosx_sysconf(host, proxy_settings)
+
+    def getproxies_macosx_sysconf():
+        """Return a dictionary of scheme -> proxy server URL mappings.
+
+        This function uses the MacOSX framework SystemConfiguration
+        to fetch the proxy information.
+        """
+        return _get_proxies()
+
+
+
+    def proxy_bypass(host):
+        """Return True, if host should be bypassed.
+
+        Checks proxy settings gathered from the environment, if specified,
+        or from the MacOSX framework SystemConfiguration.
+
+        """
+        proxies = getproxies_environment()
+        if proxies:
+            return proxy_bypass_environment(host, proxies)
+        else:
+            return proxy_bypass_macosx_sysconf(host)
+
+    def getproxies():
+        return getproxies_environment() or getproxies_macosx_sysconf()
+
+
+elif os.name == 'nt':
+    def getproxies_registry():
+        """Return a dictionary of scheme -> proxy server URL mappings.
+
+        Win32 uses the registry to store proxies.
+
+        """
+        proxies = {}
+        try:
+            import winreg
+        except ImportError:
+            # Std module, so should be around - but you never know!
+            return proxies
+        try:
+            internetSettings = winreg.OpenKey(winreg.HKEY_CURRENT_USER,
+                r'Software\Microsoft\Windows\CurrentVersion\Internet Settings')
+            proxyEnable = winreg.QueryValueEx(internetSettings,
+                                               'ProxyEnable')[0]
+            if proxyEnable:
+                # Returned as Unicode but problems if not converted to ASCII
+                proxyServer = str(winreg.QueryValueEx(internetSettings,
+                                                       'ProxyServer')[0])
+                if '=' not in proxyServer and ';' not in proxyServer:
+                    # Use one setting for all protocols.
+                    proxyServer = 'http={0};https={0};ftp={0}'.format(proxyServer)
+                for p in proxyServer.split(';'):
+                    protocol, address = p.split('=', 1)
+                    # See if address has a type:// prefix
+                    if not re.match('(?:[^/:]+)://', address):
+                        # Add type:// prefix to address without specifying type
+                        if protocol in ('http', 'https', 'ftp'):
+                            # The default proxy type of Windows is HTTP
+                            address = 'http://' + address
+                        elif protocol == 'socks':
+                            address = 'socks://' + address
+                    proxies[protocol] = address
+                # Use SOCKS proxy for HTTP(S) protocols
+                if proxies.get('socks'):
+                    # The default SOCKS proxy type of Windows is SOCKS4
+                    address = re.sub(r'^socks://', 'socks4://', proxies['socks'])
+                    proxies['http'] = proxies.get('http') or address
+                    proxies['https'] = proxies.get('https') or address
+            internetSettings.Close()
+        except (OSError, ValueError, TypeError):
+            # Either registry key not found etc, or the value in an
+            # unexpected format.
+            # proxies already set up to be empty so nothing to do
+            pass
+        return proxies
+
+    def getproxies():
+        """Return a dictionary of scheme -> proxy server URL mappings.
+
+        Returns settings gathered from the environment, if specified,
+        or the registry.
+
+        """
+        return getproxies_environment() or getproxies_registry()
+
+    def proxy_bypass_registry(host):
+        try:
+            import winreg
+        except ImportError:
+            # Std modules, so should be around - but you never know!
+            return False
+        try:
+            internetSettings = winreg.OpenKey(winreg.HKEY_CURRENT_USER,
+                r'Software\Microsoft\Windows\CurrentVersion\Internet Settings')
+            proxyEnable = winreg.QueryValueEx(internetSettings,
+                                               'ProxyEnable')[0]
+            proxyOverride = str(winreg.QueryValueEx(internetSettings,
+                                                     'ProxyOverride')[0])
+            # ^^^^ Returned as Unicode but problems if not converted to ASCII
+        except OSError:
+            return False
+        if not proxyEnable or not proxyOverride:
+            return False
+        return _proxy_bypass_winreg_override(host, proxyOverride)
+
+    def proxy_bypass(host):
+        """Return True, if host should be bypassed.
+
+        Checks proxy settings gathered from the environment, if specified,
+        or the registry.
+
+        """
+        proxies = getproxies_environment()
+        if proxies:
+            return proxy_bypass_environment(host, proxies)
+        else:
+            return proxy_bypass_registry(host)
+
+else:
+    # By default use environment variables
+    getproxies = getproxies_environment
+    proxy_bypass = proxy_bypass_environment
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/response.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/response.py
new file mode 100644
index 0000000000000000000000000000000000000000..5a2c3cc78c395d57de3fbadf7d75b96035b785b6
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/response.py
@@ -0,0 +1,84 @@
+"""Response classes used by urllib.
+
+The base class, addbase, defines a minimal file-like interface,
+including read() and readline().  The typical response object is an
+addinfourl instance, which defines an info() method that returns
+headers and a geturl() method that returns the url.
+"""
+
+import tempfile
+
+__all__ = ['addbase', 'addclosehook', 'addinfo', 'addinfourl']
+
+
+class addbase(tempfile._TemporaryFileWrapper):
+    """Base class for addinfo and addclosehook. Is a good idea for garbage collection."""
+
+    # XXX Add a method to expose the timeout on the underlying socket?
+
+    def __init__(self, fp):
+        super(addbase,  self).__init__(fp, '<urllib response>', delete=False)
+        # Keep reference around as this was part of the original API.
+        self.fp = fp
+
+    def __repr__(self):
+        return '<%s at %r whose fp = %r>' % (self.__class__.__name__,
+                                             id(self), self.file)
+
+    def __enter__(self):
+        if self.fp.closed:
+            raise ValueError("I/O operation on closed file")
+        return self
+
+    def __exit__(self, type, value, traceback):
+        self.close()
+
+
+class addclosehook(addbase):
+    """Class to add a close hook to an open file."""
+
+    def __init__(self, fp, closehook, *hookargs):
+        super(addclosehook, self).__init__(fp)
+        self.closehook = closehook
+        self.hookargs = hookargs
+
+    def close(self):
+        try:
+            closehook = self.closehook
+            hookargs = self.hookargs
+            if closehook:
+                self.closehook = None
+                self.hookargs = None
+                closehook(*hookargs)
+        finally:
+            super(addclosehook, self).close()
+
+
+class addinfo(addbase):
+    """class to add an info() method to an open file."""
+
+    def __init__(self, fp, headers):
+        super(addinfo, self).__init__(fp)
+        self.headers = headers
+
+    def info(self):
+        return self.headers
+
+
+class addinfourl(addinfo):
+    """class to add info() and geturl() methods to an open file."""
+
+    def __init__(self, fp, headers, url, code=None):
+        super(addinfourl, self).__init__(fp, headers)
+        self.url = url
+        self.code = code
+
+    @property
+    def status(self):
+        return self.code
+
+    def getcode(self):
+        return self.code
+
+    def geturl(self):
+        return self.url
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/robotparser.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/robotparser.py
new file mode 100644
index 0000000000000000000000000000000000000000..4009fd6b58f594fcb40e84fc0ef855fa72977eaf
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/urllib/robotparser.py
@@ -0,0 +1,288 @@
+""" robotparser.py
+
+    Copyright (C) 2000  Bastian Kleineidam
+
+    You can choose between two licenses when using this package:
+    1) GNU GPLv2
+    2) PSF license for Python 2.2
+
+    The robots.txt Exclusion Protocol is implemented as specified in
+    http://www.robotstxt.org/norobots-rfc.txt
+"""
+
+import collections
+import re
+import urllib.error
+import urllib.parse
+import urllib.request
+
+__all__ = ["RobotFileParser"]
+
+RequestRate = collections.namedtuple("RequestRate", "requests seconds")
+
+
+def normalize(path):
+    unquoted = urllib.parse.unquote(path, errors='surrogateescape')
+    return urllib.parse.quote(unquoted, errors='surrogateescape')
+
+def normalize_path(path):
+    path, sep, query = path.partition('?')
+    path = normalize(path)
+    if sep:
+        query = re.sub(r'[^=&]+', lambda m: normalize(m[0]), query)
+        path += '?' + query
+    return path
+
+
+class RobotFileParser:
+    """ This class provides a set of methods to read, parse and answer
+    questions about a single robots.txt file.
+
+    """
+
+    def __init__(self, url=''):
+        self.entries = []
+        self.sitemaps = []
+        self.default_entry = None
+        self.disallow_all = False
+        self.allow_all = False
+        self.set_url(url)
+        self.last_checked = 0
+
+    def mtime(self):
+        """Returns the time the robots.txt file was last fetched.
+
+        This is useful for long-running web spiders that need to
+        check for new robots.txt files periodically.
+
+        """
+        return self.last_checked
+
+    def modified(self):
+        """Sets the time the robots.txt file was last fetched to the
+        current time.
+
+        """
+        import time
+        self.last_checked = time.time()
+
+    def set_url(self, url):
+        """Sets the URL referring to a robots.txt file."""
+        self.url = url
+        self.host, self.path = urllib.parse.urlsplit(url)[1:3]
+
+    def read(self):
+        """Reads the robots.txt URL and feeds it to the parser."""
+        try:
+            f = urllib.request.urlopen(self.url)
+        except urllib.error.HTTPError as err:
+            if err.code in (401, 403):
+                self.disallow_all = True
+            elif err.code >= 400 and err.code < 500:
+                self.allow_all = True
+            err.close()
+        else:
+            raw = f.read()
+            self.parse(raw.decode("utf-8", "surrogateescape").splitlines())
+
+    def _add_entry(self, entry):
+        if "*" in entry.useragents:
+            # the default entry is considered last
+            if self.default_entry is None:
+                # the first default entry wins
+                self.default_entry = entry
+        else:
+            self.entries.append(entry)
+
+    def parse(self, lines):
+        """Parse the input lines from a robots.txt file.
+
+        We allow that a user-agent: line is not preceded by
+        one or more blank lines.
+        """
+        # states:
+        #   0: start state
+        #   1: saw user-agent line
+        #   2: saw an allow or disallow line
+        state = 0
+        entry = Entry()
+
+        self.modified()
+        for line in lines:
+            if not line:
+                if state == 1:
+                    entry = Entry()
+                    state = 0
+                elif state == 2:
+                    self._add_entry(entry)
+                    entry = Entry()
+                    state = 0
+            # remove optional comment and strip line
+            i = line.find('#')
+            if i >= 0:
+                line = line[:i]
+            line = line.strip()
+            if not line:
+                continue
+            line = line.split(':', 1)
+            if len(line) == 2:
+                line[0] = line[0].strip().lower()
+                line[1] = line[1].strip()
+                if line[0] == "user-agent":
+                    if state == 2:
+                        self._add_entry(entry)
+                        entry = Entry()
+                    entry.useragents.append(line[1])
+                    state = 1
+                elif line[0] == "disallow":
+                    if state != 0:
+                        entry.rulelines.append(RuleLine(line[1], False))
+                        state = 2
+                elif line[0] == "allow":
+                    if state != 0:
+                        entry.rulelines.append(RuleLine(line[1], True))
+                        state = 2
+                elif line[0] == "crawl-delay":
+                    if state != 0:
+                        # before trying to convert to int we need to make
+                        # sure that robots.txt has valid syntax otherwise
+                        # it will crash
+                        if line[1].strip().isdigit():
+                            entry.delay = int(line[1])
+                        state = 2
+                elif line[0] == "request-rate":
+                    if state != 0:
+                        numbers = line[1].split('/')
+                        # check if all values are sane
+                        if (len(numbers) == 2 and numbers[0].strip().isdigit()
+                            and numbers[1].strip().isdigit()):
+                            entry.req_rate = RequestRate(int(numbers[0]), int(numbers[1]))
+                        state = 2
+                elif line[0] == "sitemap":
+                    # According to http://www.sitemaps.org/protocol.html
+                    # "This directive is independent of the user-agent line,
+                    #  so it doesn't matter where you place it in your file."
+                    # Therefore we do not change the state of the parser.
+                    self.sitemaps.append(line[1])
+        if state == 2:
+            self._add_entry(entry)
+
+    def can_fetch(self, useragent, url):
+        """using the parsed robots.txt decide if useragent can fetch url"""
+        if self.disallow_all:
+            return False
+        if self.allow_all:
+            return True
+        # Until the robots.txt file has been read or found not
+        # to exist, we must assume that no url is allowable.
+        # This prevents false positives when a user erroneously
+        # calls can_fetch() before calling read().
+        if not self.last_checked:
+            return False
+        # search for given user agent matches
+        # the first match counts
+        # TODO: The private API is used in order to preserve an empty query.
+        # This is temporary until the public API starts supporting this feature.
+        parsed_url = urllib.parse._urlsplit(url, '')
+        url = urllib.parse._urlunsplit(None, None, *parsed_url[2:])
+        url = normalize_path(url)
+        if not url:
+            url = "/"
+        for entry in self.entries:
+            if entry.applies_to(useragent):
+                return entry.allowance(url)
+        # try the default entry last
+        if self.default_entry:
+            return self.default_entry.allowance(url)
+        # agent not found ==> access granted
+        return True
+
+    def crawl_delay(self, useragent):
+        if not self.mtime():
+            return None
+        for entry in self.entries:
+            if entry.applies_to(useragent):
+                return entry.delay
+        if self.default_entry:
+            return self.default_entry.delay
+        return None
+
+    def request_rate(self, useragent):
+        if not self.mtime():
+            return None
+        for entry in self.entries:
+            if entry.applies_to(useragent):
+                return entry.req_rate
+        if self.default_entry:
+            return self.default_entry.req_rate
+        return None
+
+    def site_maps(self):
+        if not self.sitemaps:
+            return None
+        return self.sitemaps
+
+    def __str__(self):
+        entries = self.entries
+        if self.default_entry is not None:
+            entries = entries + [self.default_entry]
+        return '\n\n'.join(map(str, entries))
+
+class RuleLine:
+    """A rule line is a single "Allow:" (allowance==True) or "Disallow:"
+       (allowance==False) followed by a path."""
+    def __init__(self, path, allowance):
+        if path == '' and not allowance:
+            # an empty value means allow all
+            allowance = True
+        self.path = normalize_path(path)
+        self.allowance = allowance
+
+    def applies_to(self, filename):
+        return self.path == "*" or filename.startswith(self.path)
+
+    def __str__(self):
+        return ("Allow" if self.allowance else "Disallow") + ": " + self.path
+
+
+class Entry:
+    """An entry has one or more user-agents and zero or more rulelines"""
+    def __init__(self):
+        self.useragents = []
+        self.rulelines = []
+        self.delay = None
+        self.req_rate = None
+
+    def __str__(self):
+        ret = []
+        for agent in self.useragents:
+            ret.append(f"User-agent: {agent}")
+        if self.delay is not None:
+            ret.append(f"Crawl-delay: {self.delay}")
+        if self.req_rate is not None:
+            rate = self.req_rate
+            ret.append(f"Request-rate: {rate.requests}/{rate.seconds}")
+        ret.extend(map(str, self.rulelines))
+        return '\n'.join(ret)
+
+    def applies_to(self, useragent):
+        """check if this entry applies to the specified agent"""
+        # split the name token and make it lower case
+        useragent = useragent.split("/")[0].lower()
+        for agent in self.useragents:
+            if agent == '*':
+                # we have the catch-all agent
+                return True
+            agent = agent.lower()
+            if agent in useragent:
+                return True
+        return False
+
+    def allowance(self, filename):
+        """Preconditions:
+        - our agent applies to this entry
+        - filename is URL encoded"""
+        for line in self.rulelines:
+            if line.applies_to(filename):
+                return line.allowance
+        return True
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..88f3340af418342ec043876fa238d26afbf4a5d1
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__init__.py
@@ -0,0 +1,700 @@
+"""
+Virtual environment (venv) package for Python. Based on PEP 405.
+
+Copyright (C) 2011-2014 Vinay Sajip.
+Licensed to the PSF under a contributor agreement.
+"""
+import logging
+import os
+import shutil
+import subprocess
+import sys
+import sysconfig
+import types
+import shlex
+
+
+CORE_VENV_DEPS = ('pip',)
+logger = logging.getLogger(__name__)
+
+
+class EnvBuilder:
+    """
+    This class exists to allow virtual environment creation to be
+    customized. The constructor parameters determine the builder's
+    behaviour when called upon to create a virtual environment.
+
+    By default, the builder makes the system (global) site-packages dir
+    *un*available to the created environment.
+
+    If invoked using the Python -m option, the default is to use copying
+    on Windows platforms but symlinks elsewhere. If instantiated some
+    other way, the default is to *not* use symlinks.
+
+    :param system_site_packages: If True, the system (global) site-packages
+                                 dir is available to created environments.
+    :param clear: If True, delete the contents of the environment directory if
+                  it already exists, before environment creation.
+    :param symlinks: If True, attempt to symlink rather than copy files into
+                     virtual environment.
+    :param upgrade: If True, upgrade an existing virtual environment.
+    :param with_pip: If True, ensure pip is installed in the virtual
+                     environment
+    :param prompt: Alternative terminal prefix for the environment.
+    :param upgrade_deps: Update the base venv modules to the latest on PyPI
+    :param scm_ignore_files: Create ignore files for the SCMs specified by the
+                             iterable.
+    """
+
+    def __init__(self, system_site_packages=False, clear=False,
+                 symlinks=False, upgrade=False, with_pip=False, prompt=None,
+                 upgrade_deps=False, *, scm_ignore_files=frozenset()):
+        self.system_site_packages = system_site_packages
+        self.clear = clear
+        self.symlinks = symlinks
+        self.upgrade = upgrade
+        self.with_pip = with_pip
+        self.orig_prompt = prompt
+        if prompt == '.':  # see bpo-38901
+            prompt = os.path.basename(os.getcwd())
+        self.prompt = prompt
+        self.upgrade_deps = upgrade_deps
+        self.scm_ignore_files = frozenset(map(str.lower, scm_ignore_files))
+
+    def create(self, env_dir):
+        """
+        Create a virtual environment in a directory.
+
+        :param env_dir: The target directory to create an environment in.
+
+        """
+        env_dir = os.path.abspath(env_dir)
+        context = self.ensure_directories(env_dir)
+        for scm in self.scm_ignore_files:
+            getattr(self, f"create_{scm}_ignore_file")(context)
+        # See issue 24875. We need system_site_packages to be False
+        # until after pip is installed.
+        true_system_site_packages = self.system_site_packages
+        self.system_site_packages = False
+        self.create_configuration(context)
+        self.setup_python(context)
+        if self.with_pip:
+            self._setup_pip(context)
+        if not self.upgrade:
+            self.setup_scripts(context)
+            self.post_setup(context)
+        if true_system_site_packages:
+            # We had set it to False before, now
+            # restore it and rewrite the configuration
+            self.system_site_packages = True
+            self.create_configuration(context)
+        if self.upgrade_deps:
+            self.upgrade_dependencies(context)
+
+    def clear_directory(self, path):
+        for fn in os.listdir(path):
+            fn = os.path.join(path, fn)
+            if os.path.islink(fn) or os.path.isfile(fn):
+                os.remove(fn)
+            elif os.path.isdir(fn):
+                shutil.rmtree(fn)
+
+    def _venv_path(self, env_dir, name):
+        vars = {
+            'base': env_dir,
+            'platbase': env_dir,
+        }
+        return sysconfig.get_path(name, scheme='venv', vars=vars)
+
+    @classmethod
+    def _same_path(cls, path1, path2):
+        """Check whether two paths appear the same.
+
+        Whether they refer to the same file is irrelevant; we're testing for
+        whether a human reader would look at the path string and easily tell
+        that they're the same file.
+        """
+        if sys.platform == 'win32':
+            if os.path.normcase(path1) == os.path.normcase(path2):
+                return True
+            # gh-90329: Don't display a warning for short/long names
+            import _winapi
+            try:
+                path1 = _winapi.GetLongPathName(os.fsdecode(path1))
+            except OSError:
+                pass
+            try:
+                path2 = _winapi.GetLongPathName(os.fsdecode(path2))
+            except OSError:
+                pass
+            if os.path.normcase(path1) == os.path.normcase(path2):
+                return True
+            return False
+        else:
+            return path1 == path2
+
+    def ensure_directories(self, env_dir):
+        """
+        Create the directories for the environment.
+
+        Returns a context object which holds paths in the environment,
+        for use by subsequent logic.
+        """
+
+        def create_if_needed(d):
+            if not os.path.exists(d):
+                os.makedirs(d)
+            elif os.path.islink(d) or os.path.isfile(d):
+                raise ValueError('Unable to create directory %r' % d)
+
+        if os.pathsep in os.fspath(env_dir):
+            raise ValueError(f'Refusing to create a venv in {env_dir} because '
+                             f'it contains the PATH separator {os.pathsep}.')
+        if os.path.exists(env_dir) and self.clear:
+            self.clear_directory(env_dir)
+        context = types.SimpleNamespace()
+        context.env_dir = env_dir
+        context.env_name = os.path.split(env_dir)[1]
+        context.prompt = self.prompt if self.prompt is not None else context.env_name
+        create_if_needed(env_dir)
+        executable = sys._base_executable
+        if not executable:  # see gh-96861
+            raise ValueError('Unable to determine path to the running '
+                             'Python interpreter. Provide an explicit path or '
+                             'check that your PATH environment variable is '
+                             'correctly set.')
+        dirname, exename = os.path.split(os.path.abspath(executable))
+        if sys.platform == 'win32':
+            # Always create the simplest name in the venv. It will either be a
+            # link back to executable, or a copy of the appropriate launcher
+            _d = '_d' if os.path.splitext(exename)[0].endswith('_d') else ''
+            exename = f'python{_d}.exe'
+        context.executable = executable
+        context.python_dir = dirname
+        context.python_exe = exename
+        binpath = self._venv_path(env_dir, 'scripts')
+        libpath = self._venv_path(env_dir, 'purelib')
+
+        # PEP 405 says venvs should create a local include directory.
+        # See https://peps.python.org/pep-0405/#include-files
+        # XXX: This directory is not exposed in sysconfig or anywhere else, and
+        #      doesn't seem to be utilized by modern packaging tools. We keep it
+        #      for backwards-compatibility, and to follow the PEP, but I would
+        #      recommend against using it, as most tooling does not pass it to
+        #      compilers. Instead, until we standardize a site-specific include
+        #      directory, I would recommend installing headers as package data,
+        #      and providing some sort of API to get the include directories.
+        #      Example: https://numpy.org/doc/2.1/reference/generated/numpy.get_include.html
+        incpath = os.path.join(env_dir, 'Include' if os.name == 'nt' else 'include')
+
+        context.inc_path = incpath
+        create_if_needed(incpath)
+        context.lib_path = libpath
+        create_if_needed(libpath)
+        # Issue 21197: create lib64 as a symlink to lib on 64-bit non-OS X POSIX
+        if ((sys.maxsize > 2**32) and (os.name == 'posix') and
+            (sys.platform != 'darwin')):
+            link_path = os.path.join(env_dir, 'lib64')
+            if not os.path.exists(link_path):   # Issue #21643
+                os.symlink('lib', link_path)
+        context.bin_path = binpath
+        context.bin_name = os.path.relpath(binpath, env_dir)
+        context.env_exe = os.path.join(binpath, exename)
+        create_if_needed(binpath)
+        # Assign and update the command to use when launching the newly created
+        # environment, in case it isn't simply the executable script (e.g. bpo-45337)
+        context.env_exec_cmd = context.env_exe
+        if sys.platform == 'win32':
+            # bpo-45337: Fix up env_exec_cmd to account for file system redirections.
+            # Some redirects only apply to CreateFile and not CreateProcess
+            real_env_exe = os.path.realpath(context.env_exe)
+            if not self._same_path(real_env_exe, context.env_exe):
+                logger.warning('Actual environment location may have moved due to '
+                               'redirects, links or junctions.\n'
+                               '  Requested location: "%s"\n'
+                               '  Actual location:    "%s"',
+                               context.env_exe, real_env_exe)
+                context.env_exec_cmd = real_env_exe
+        return context
+
+    def create_configuration(self, context):
+        """
+        Create a configuration file indicating where the environment's Python
+        was copied from, and whether the system site-packages should be made
+        available in the environment.
+
+        :param context: The information for the environment creation request
+                        being processed.
+        """
+        context.cfg_path = path = os.path.join(context.env_dir, 'pyvenv.cfg')
+        with open(path, 'w', encoding='utf-8') as f:
+            f.write('home = %s\n' % context.python_dir)
+            if self.system_site_packages:
+                incl = 'true'
+            else:
+                incl = 'false'
+            f.write('include-system-site-packages = %s\n' % incl)
+            f.write('version = %d.%d.%d\n' % sys.version_info[:3])
+            if self.prompt is not None:
+                f.write(f'prompt = {self.prompt!r}\n')
+            f.write('executable = %s\n' % os.path.realpath(sys.executable))
+            args = []
+            nt = os.name == 'nt'
+            if nt and self.symlinks:
+                args.append('--symlinks')
+            if not nt and not self.symlinks:
+                args.append('--copies')
+            if not self.with_pip:
+                args.append('--without-pip')
+            if self.system_site_packages:
+                args.append('--system-site-packages')
+            if self.clear:
+                args.append('--clear')
+            if self.upgrade:
+                args.append('--upgrade')
+            if self.upgrade_deps:
+                args.append('--upgrade-deps')
+            if self.orig_prompt is not None:
+                args.append(f'--prompt="{self.orig_prompt}"')
+            if not self.scm_ignore_files:
+                args.append('--without-scm-ignore-files')
+
+            args.append(context.env_dir)
+            args = ' '.join(args)
+            f.write(f'command = {sys.executable} -m venv {args}\n')
+
+    def symlink_or_copy(self, src, dst, relative_symlinks_ok=False):
+        """
+        Try symlinking a file, and if that fails, fall back to copying.
+        (Unused on Windows, because we can't just copy a failed symlink file: we
+        switch to a different set of files instead.)
+        """
+        assert os.name != 'nt'
+        force_copy = not self.symlinks
+        if not force_copy:
+            try:
+                if not os.path.islink(dst):  # can't link to itself!
+                    if relative_symlinks_ok:
+                        assert os.path.dirname(src) == os.path.dirname(dst)
+                        os.symlink(os.path.basename(src), dst)
+                    else:
+                        os.symlink(src, dst)
+            except Exception:   # may need to use a more specific exception
+                logger.warning('Unable to symlink %r to %r', src, dst)
+                force_copy = True
+        if force_copy:
+            shutil.copyfile(src, dst)
+
+    def create_git_ignore_file(self, context):
+        """
+        Create a .gitignore file in the environment directory.
+
+        The contents of the file cause the entire environment directory to be
+        ignored by git.
+        """
+        gitignore_path = os.path.join(context.env_dir, '.gitignore')
+        with open(gitignore_path, 'w', encoding='utf-8') as file:
+            file.write('# Created by venv; '
+                       'see https://docs.python.org/3/library/venv.html\n')
+            file.write('*\n')
+
+    if os.name != 'nt':
+        def setup_python(self, context):
+            """
+            Set up a Python executable in the environment.
+
+            :param context: The information for the environment creation request
+                            being processed.
+            """
+            binpath = context.bin_path
+            path = context.env_exe
+            copier = self.symlink_or_copy
+            dirname = context.python_dir
+            copier(context.executable, path)
+            if not os.path.islink(path):
+                os.chmod(path, 0o755)
+
+            suffixes = ['python', 'python3', f'python3.{sys.version_info[1]}']
+            if sys.version_info[:2] == (3, 14) and sys.getfilesystemencoding() == 'utf-8':
+                suffixes.append('𝜋thon')
+            for suffix in suffixes:
+                path = os.path.join(binpath, suffix)
+                if not os.path.exists(path):
+                    # Issue 18807: make copies if
+                    # symlinks are not wanted
+                    copier(context.env_exe, path, relative_symlinks_ok=True)
+                    if not os.path.islink(path):
+                        os.chmod(path, 0o755)
+
+    else:
+        def setup_python(self, context):
+            """
+            Set up a Python executable in the environment.
+
+            :param context: The information for the environment creation request
+                            being processed.
+            """
+            binpath = context.bin_path
+            dirname = context.python_dir
+            exename = os.path.basename(context.env_exe)
+            exe_stem = os.path.splitext(exename)[0]
+            exe_d = '_d' if os.path.normcase(exe_stem).endswith('_d') else ''
+            if sysconfig.is_python_build():
+                scripts = dirname
+            else:
+                scripts = os.path.join(os.path.dirname(__file__),
+                                       'scripts', 'nt')
+            if not sysconfig.get_config_var("Py_GIL_DISABLED"):
+                python_exe = os.path.join(dirname, f'python{exe_d}.exe')
+                pythonw_exe = os.path.join(dirname, f'pythonw{exe_d}.exe')
+                link_sources = {
+                    'python.exe': python_exe,
+                    f'python{exe_d}.exe': python_exe,
+                    'pythonw.exe': pythonw_exe,
+                    f'pythonw{exe_d}.exe': pythonw_exe,
+                }
+                python_exe = os.path.join(scripts, f'venvlauncher{exe_d}.exe')
+                pythonw_exe = os.path.join(scripts, f'venvwlauncher{exe_d}.exe')
+                copy_sources = {
+                    'python.exe': python_exe,
+                    f'python{exe_d}.exe': python_exe,
+                    'pythonw.exe': pythonw_exe,
+                    f'pythonw{exe_d}.exe': pythonw_exe,
+                }
+            else:
+                exe_t = f'3.{sys.version_info[1]}t'
+                python_exe = os.path.join(dirname, f'python{exe_t}{exe_d}.exe')
+                pythonw_exe = os.path.join(dirname, f'pythonw{exe_t}{exe_d}.exe')
+                link_sources = {
+                    'python.exe': python_exe,
+                    f'python{exe_d}.exe': python_exe,
+                    f'python{exe_t}.exe': python_exe,
+                    f'python{exe_t}{exe_d}.exe': python_exe,
+                    'pythonw.exe': pythonw_exe,
+                    f'pythonw{exe_d}.exe': pythonw_exe,
+                    f'pythonw{exe_t}.exe': pythonw_exe,
+                    f'pythonw{exe_t}{exe_d}.exe': pythonw_exe,
+                }
+                python_exe = os.path.join(scripts, f'venvlaunchert{exe_d}.exe')
+                pythonw_exe = os.path.join(scripts, f'venvwlaunchert{exe_d}.exe')
+                copy_sources = {
+                    'python.exe': python_exe,
+                    f'python{exe_d}.exe': python_exe,
+                    f'python{exe_t}.exe': python_exe,
+                    f'python{exe_t}{exe_d}.exe': python_exe,
+                    'pythonw.exe': pythonw_exe,
+                    f'pythonw{exe_d}.exe': pythonw_exe,
+                    f'pythonw{exe_t}.exe': pythonw_exe,
+                    f'pythonw{exe_t}{exe_d}.exe': pythonw_exe,
+                }
+
+            do_copies = True
+            if self.symlinks:
+                do_copies = False
+                # For symlinking, we need all the DLLs to be available alongside
+                # the executables.
+                link_sources.update({
+                    f: os.path.join(dirname, f) for f in os.listdir(dirname)
+                    if os.path.normcase(f).startswith(('python', 'vcruntime'))
+                    and os.path.normcase(os.path.splitext(f)[1]) == '.dll'
+                })
+
+                to_unlink = []
+                for dest, src in link_sources.items():
+                    dest = os.path.join(binpath, dest)
+                    try:
+                        os.symlink(src, dest)
+                        to_unlink.append(dest)
+                    except OSError:
+                        logger.warning('Unable to symlink %r to %r', src, dest)
+                        do_copies = True
+                        for f in to_unlink:
+                            try:
+                                os.unlink(f)
+                            except OSError:
+                                logger.warning('Failed to clean up symlink %r',
+                                               f)
+                        logger.warning('Retrying with copies')
+                        break
+
+            if do_copies:
+                for dest, src in copy_sources.items():
+                    dest = os.path.join(binpath, dest)
+                    try:
+                        shutil.copy2(src, dest)
+                    except OSError:
+                        logger.warning('Unable to copy %r to %r', src, dest)
+
+            if sysconfig.is_python_build():
+                # copy init.tcl
+                for root, dirs, files in os.walk(context.python_dir):
+                    if 'init.tcl' in files:
+                        tcldir = os.path.basename(root)
+                        tcldir = os.path.join(context.env_dir, 'Lib', tcldir)
+                        if not os.path.exists(tcldir):
+                            os.makedirs(tcldir)
+                        src = os.path.join(root, 'init.tcl')
+                        dst = os.path.join(tcldir, 'init.tcl')
+                        shutil.copyfile(src, dst)
+                        break
+
+    def _call_new_python(self, context, *py_args, **kwargs):
+        """Executes the newly created Python using safe-ish options"""
+        # gh-98251: We do not want to just use '-I' because that masks
+        # legitimate user preferences (such as not writing bytecode). All we
+        # really need is to ensure that the path variables do not overrule
+        # normal venv handling.
+        args = [context.env_exec_cmd, *py_args]
+        kwargs['env'] = env = os.environ.copy()
+        env['VIRTUAL_ENV'] = context.env_dir
+        env.pop('PYTHONHOME', None)
+        env.pop('PYTHONPATH', None)
+        kwargs['cwd'] = context.env_dir
+        kwargs['executable'] = context.env_exec_cmd
+        subprocess.check_output(args, **kwargs)
+
+    def _setup_pip(self, context):
+        """Installs or upgrades pip in a virtual environment"""
+        self._call_new_python(context, '-m', 'ensurepip', '--upgrade',
+                              '--default-pip', stderr=subprocess.STDOUT)
+
+    def setup_scripts(self, context):
+        """
+        Set up scripts into the created environment from a directory.
+
+        This method installs the default scripts into the environment
+        being created. You can prevent the default installation by overriding
+        this method if you really need to, or if you need to specify
+        a different location for the scripts to install. By default, the
+        'scripts' directory in the venv package is used as the source of
+        scripts to install.
+        """
+        path = os.path.abspath(os.path.dirname(__file__))
+        path = os.path.join(path, 'scripts')
+        self.install_scripts(context, path)
+
+    def post_setup(self, context):
+        """
+        Hook for post-setup modification of the venv. Subclasses may install
+        additional packages or scripts here, add activation shell scripts, etc.
+
+        :param context: The information for the environment creation request
+                        being processed.
+        """
+        pass
+
+    def replace_variables(self, text, context):
+        """
+        Replace variable placeholders in script text with context-specific
+        variables.
+
+        Return the text passed in , but with variables replaced.
+
+        :param text: The text in which to replace placeholder variables.
+        :param context: The information for the environment creation request
+                        being processed.
+        """
+        replacements = {
+            '__VENV_DIR__': context.env_dir,
+            '__VENV_NAME__': context.env_name,
+            '__VENV_PROMPT__': context.prompt,
+            '__VENV_BIN_NAME__': context.bin_name,
+            '__VENV_PYTHON__': context.env_exe,
+        }
+
+        def quote_ps1(s):
+            """
+            This should satisfy PowerShell quoting rules [1], unless the quoted
+            string is passed directly to Windows native commands [2].
+            [1]: https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_quoting_rules
+            [2]: https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_parsing#passing-arguments-that-contain-quote-characters
+            """
+            s = s.replace("'", "''")
+            return f"'{s}'"
+
+        def quote_bat(s):
+            return s
+
+        # gh-124651: need to quote the template strings properly
+        quote = shlex.quote
+        script_path = context.script_path
+        if script_path.endswith('.ps1'):
+            quote = quote_ps1
+        elif script_path.endswith('.bat'):
+            quote = quote_bat
+        else:
+            # fallbacks to POSIX shell compliant quote
+            quote = shlex.quote
+
+        replacements = {key: quote(s) for key, s in replacements.items()}
+        for key, quoted in replacements.items():
+            text = text.replace(key, quoted)
+        return text
+
+    def install_scripts(self, context, path):
+        """
+        Install scripts into the created environment from a directory.
+
+        :param context: The information for the environment creation request
+                        being processed.
+        :param path:    Absolute pathname of a directory containing script.
+                        Scripts in the 'common' subdirectory of this directory,
+                        and those in the directory named for the platform
+                        being run on, are installed in the created environment.
+                        Placeholder variables are replaced with environment-
+                        specific values.
+        """
+        binpath = context.bin_path
+        plen = len(path)
+        if os.name == 'nt':
+            def skip_file(f):
+                f = os.path.normcase(f)
+                return (f.startswith(('python', 'venv'))
+                        and f.endswith(('.exe', '.pdb')))
+        else:
+            def skip_file(f):
+                return False
+        for root, dirs, files in os.walk(path):
+            if root == path:  # at top-level, remove irrelevant dirs
+                for d in dirs[:]:
+                    if d not in ('common', os.name):
+                        dirs.remove(d)
+                continue  # ignore files in top level
+            for f in files:
+                if skip_file(f):
+                    continue
+                srcfile = os.path.join(root, f)
+                suffix = root[plen:].split(os.sep)[2:]
+                if not suffix:
+                    dstdir = binpath
+                else:
+                    dstdir = os.path.join(binpath, *suffix)
+                if not os.path.exists(dstdir):
+                    os.makedirs(dstdir)
+                dstfile = os.path.join(dstdir, f)
+                if os.name == 'nt' and srcfile.endswith(('.exe', '.pdb')):
+                    shutil.copy2(srcfile, dstfile)
+                    continue
+                with open(srcfile, 'rb') as f:
+                    data = f.read()
+                try:
+                    context.script_path = srcfile
+                    new_data = (
+                        self.replace_variables(data.decode('utf-8'), context)
+                            .encode('utf-8')
+                    )
+                except UnicodeError as e:
+                    logger.warning('unable to copy script %r, '
+                                   'may be binary: %s', srcfile, e)
+                    continue
+                if new_data == data:
+                    shutil.copy(srcfile, dstfile)
+                else:
+                    with open(dstfile, 'wb') as f:
+                        f.write(new_data)
+                    shutil.copymode(srcfile, dstfile)
+
+    def upgrade_dependencies(self, context):
+        logger.debug(
+            f'Upgrading {CORE_VENV_DEPS} packages in {context.bin_path}'
+        )
+        self._call_new_python(context, '-m', 'pip', 'install', '--upgrade',
+                              *CORE_VENV_DEPS)
+
+
+def create(env_dir, system_site_packages=False, clear=False,
+           symlinks=False, with_pip=False, prompt=None, upgrade_deps=False,
+           *, scm_ignore_files=frozenset()):
+    """Create a virtual environment in a directory."""
+    builder = EnvBuilder(system_site_packages=system_site_packages,
+                         clear=clear, symlinks=symlinks, with_pip=with_pip,
+                         prompt=prompt, upgrade_deps=upgrade_deps,
+                         scm_ignore_files=scm_ignore_files)
+    builder.create(env_dir)
+
+
+def main(args=None):
+    import argparse
+
+    parser = argparse.ArgumentParser(description='Creates virtual Python '
+                                                 'environments in one or '
+                                                 'more target '
+                                                 'directories.',
+                                     epilog='Once an environment has been '
+                                            'created, you may wish to '
+                                            'activate it, e.g. by '
+                                            'sourcing an activate script '
+                                            'in its bin directory.',
+                                     color=True,
+                                     )
+    parser.add_argument('dirs', metavar='ENV_DIR', nargs='+',
+                        help='A directory to create the environment in.')
+    parser.add_argument('--system-site-packages', default=False,
+                        action='store_true', dest='system_site',
+                        help='Give the virtual environment access to the '
+                             'system site-packages dir.')
+    if os.name == 'nt':
+        use_symlinks = False
+    else:
+        use_symlinks = True
+    group = parser.add_mutually_exclusive_group()
+    group.add_argument('--symlinks', default=use_symlinks,
+                       action='store_true', dest='symlinks',
+                       help='Try to use symlinks rather than copies, '
+                            'when symlinks are not the default for '
+                            'the platform.')
+    group.add_argument('--copies', default=not use_symlinks,
+                       action='store_false', dest='symlinks',
+                       help='Try to use copies rather than symlinks, '
+                            'even when symlinks are the default for '
+                            'the platform.')
+    parser.add_argument('--clear', default=False, action='store_true',
+                        dest='clear', help='Delete the contents of the '
+                                           'environment directory if it '
+                                           'already exists, before '
+                                           'environment creation.')
+    parser.add_argument('--upgrade', default=False, action='store_true',
+                        dest='upgrade', help='Upgrade the environment '
+                                             'directory to use this version '
+                                             'of Python, assuming Python '
+                                             'has been upgraded in-place.')
+    parser.add_argument('--without-pip', dest='with_pip',
+                        default=True, action='store_false',
+                        help='Skips installing or upgrading pip in the '
+                             'virtual environment (pip is bootstrapped '
+                             'by default)')
+    parser.add_argument('--prompt',
+                        help='Provides an alternative prompt prefix for '
+                             'this environment.')
+    parser.add_argument('--upgrade-deps', default=False, action='store_true',
+                        dest='upgrade_deps',
+                        help=f'Upgrade core dependencies ({", ".join(CORE_VENV_DEPS)}) '
+                             'to the latest version in PyPI')
+    parser.add_argument('--without-scm-ignore-files', dest='scm_ignore_files',
+                        action='store_const', const=frozenset(),
+                        default=frozenset(['git']),
+                        help='Skips adding SCM ignore files to the environment '
+                             'directory (Git is supported by default).')
+    options = parser.parse_args(args)
+    if options.upgrade and options.clear:
+        raise ValueError('you cannot supply --upgrade and --clear together.')
+    builder = EnvBuilder(system_site_packages=options.system_site,
+                         clear=options.clear,
+                         symlinks=options.symlinks,
+                         upgrade=options.upgrade,
+                         with_pip=options.with_pip,
+                         prompt=options.prompt,
+                         upgrade_deps=options.upgrade_deps,
+                         scm_ignore_files=options.scm_ignore_files)
+    for d in options.dirs:
+        builder.create(d)
+
+
+if __name__ == '__main__':
+    rc = 1
+    try:
+        main()
+        rc = 0
+    except Exception as e:
+        print('Error: %s' % e, file=sys.stderr)
+    sys.exit(rc)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..88f55439dc210c47139d31c665ad58f7f0f3f2ca
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/venv/__main__.py
@@ -0,0 +1,10 @@
+import sys
+from . import main
+
+rc = 1
+try:
+    main()
+    rc = 0
+except Exception as e:
+    print('Error:', e, file=sys.stderr)
+sys.exit(rc)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..59ee48fddec232b485a3559f7ccc80585616dfd7
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/__init__.py
@@ -0,0 +1,25 @@
+"""wsgiref -- a WSGI (PEP 3333) Reference Library
+
+Current Contents:
+
+* util -- Miscellaneous useful functions and wrappers
+
+* headers -- Manage response headers
+
+* handlers -- base classes for server/gateway implementations
+
+* simple_server -- a simple BaseHTTPServer that supports WSGI
+
+* validate -- validation wrapper that sits between an app and a server
+  to detect errors in either
+
+* types -- collection of WSGI-related types for static type checking
+
+To-Do:
+
+* cgi_gateway -- Run WSGI apps under CGI (pending a deployment standard)
+
+* cgi_wrapper -- Run CGI apps under WSGI
+
+* router -- a simple middleware component that handles URL traversal
+"""
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/handlers.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/handlers.py
new file mode 100644
index 0000000000000000000000000000000000000000..f8fe89f6e13436b5035003779c7fcc27bf869eb2
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/handlers.py
@@ -0,0 +1,575 @@
+"""Base classes for server/gateway implementations"""
+
+from .util import FileWrapper, guess_scheme, is_hop_by_hop
+from .headers import Headers, _name_disallowed_re
+
+import sys, os, time
+
+__all__ = [
+    'BaseHandler', 'SimpleHandler', 'BaseCGIHandler', 'CGIHandler',
+    'IISCGIHandler', 'read_environ'
+]
+
+# Weekday and month names for HTTP date/time formatting; always English!
+_weekdayname = ["Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun"]
+_monthname = [None, # Dummy so we can use 1-based month numbers
+              "Jan", "Feb", "Mar", "Apr", "May", "Jun",
+              "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"]
+
+def format_date_time(timestamp):
+    year, month, day, hh, mm, ss, wd, y, z = time.gmtime(timestamp)
+    return "%s, %02d %3s %4d %02d:%02d:%02d GMT" % (
+        _weekdayname[wd], day, _monthname[month], year, hh, mm, ss
+    )
+
+_is_request = {
+    'SCRIPT_NAME', 'PATH_INFO', 'QUERY_STRING', 'REQUEST_METHOD', 'AUTH_TYPE',
+    'CONTENT_TYPE', 'CONTENT_LENGTH', 'HTTPS', 'REMOTE_USER', 'REMOTE_IDENT',
+}.__contains__
+
+def _needs_transcode(k):
+    return _is_request(k) or k.startswith('HTTP_') or k.startswith('SSL_') \
+        or (k.startswith('REDIRECT_') and _needs_transcode(k[9:]))
+
+def read_environ():
+    """Read environment, fixing HTTP variables"""
+    enc = sys.getfilesystemencoding()
+    esc = 'surrogateescape'
+    try:
+        ''.encode('utf-8', esc)
+    except LookupError:
+        esc = 'replace'
+    environ = {}
+
+    # Take the basic environment from native-unicode os.environ. Attempt to
+    # fix up the variables that come from the HTTP request to compensate for
+    # the bytes->unicode decoding step that will already have taken place.
+    for k, v in os.environ.items():
+        if _needs_transcode(k):
+
+            # On win32, the os.environ is natively Unicode. Different servers
+            # decode the request bytes using different encodings.
+            if sys.platform == 'win32':
+                software = os.environ.get('SERVER_SOFTWARE', '').lower()
+
+                # On IIS, the HTTP request will be decoded as UTF-8 as long
+                # as the input is a valid UTF-8 sequence. Otherwise it is
+                # decoded using the system code page (mbcs), with no way to
+                # detect this has happened. Because UTF-8 is the more likely
+                # encoding, and mbcs is inherently unreliable (an mbcs string
+                # that happens to be valid UTF-8 will not be decoded as mbcs)
+                # always recreate the original bytes as UTF-8.
+                if software.startswith('microsoft-iis/'):
+                    v = v.encode('utf-8').decode('iso-8859-1')
+
+                # Apache mod_cgi writes bytes-as-unicode (as if ISO-8859-1) direct
+                # to the Unicode environ. No modification needed.
+                elif software.startswith('apache/'):
+                    pass
+
+                # Python 3's http.server.CGIHTTPRequestHandler decodes
+                # using the urllib.unquote default of UTF-8, amongst other
+                # issues.
+                elif (
+                    software.startswith('simplehttp/')
+                    and 'python/3' in software
+                ):
+                    v = v.encode('utf-8').decode('iso-8859-1')
+
+                # For other servers, guess that they have written bytes to
+                # the environ using stdio byte-oriented interfaces, ending up
+                # with the system code page.
+                else:
+                    v = v.encode(enc, 'replace').decode('iso-8859-1')
+
+            # Recover bytes from unicode environ, using surrogate escapes
+            # where available (Python 3.1+).
+            else:
+                v = v.encode(enc, esc).decode('iso-8859-1')
+
+        environ[k] = v
+    return environ
+
+
+class BaseHandler:
+    """Manage the invocation of a WSGI application"""
+
+    # Configuration parameters; can override per-subclass or per-instance
+    wsgi_version = (1,0)
+    wsgi_multithread = True
+    wsgi_multiprocess = True
+    wsgi_run_once = False
+
+    origin_server = True    # We are transmitting direct to client
+    http_version  = "1.0"   # Version that should be used for response
+    server_software = None  # String name of server software, if any
+
+    # os_environ is used to supply configuration from the OS environment:
+    # by default it's a copy of 'os.environ' as of import time, but you can
+    # override this in e.g. your __init__ method.
+    os_environ= read_environ()
+
+    # Collaborator classes
+    wsgi_file_wrapper = FileWrapper     # set to None to disable
+    headers_class = Headers             # must be a Headers-like class
+
+    # Error handling (also per-subclass or per-instance)
+    traceback_limit = None  # Print entire traceback to self.get_stderr()
+    error_status = "500 Internal Server Error"
+    error_headers = [('Content-Type','text/plain')]
+    error_body = b"A server error occurred.  Please contact the administrator."
+
+    # State variables (don't mess with these)
+    status = result = None
+    headers_sent = False
+    headers = None
+    bytes_sent = 0
+
+    def run(self, application):
+        """Invoke the application"""
+        # Note to self: don't move the close()!  Asynchronous servers shouldn't
+        # call close() from finish_response(), so if you close() anywhere but
+        # the double-error branch here, you'll break asynchronous servers by
+        # prematurely closing.  Async servers must return from 'run()' without
+        # closing if there might still be output to iterate over.
+        try:
+            self.setup_environ()
+            self.result = application(self.environ, self.start_response)
+            self.finish_response()
+        except (ConnectionAbortedError, BrokenPipeError, ConnectionResetError):
+            # We expect the client to close the connection abruptly from time
+            # to time.
+            return
+        except:
+            try:
+                self.handle_error()
+            except:
+                # If we get an error handling an error, just give up already!
+                self.close()
+                raise   # ...and let the actual server figure it out.
+
+
+    def setup_environ(self):
+        """Set up the environment for one request"""
+
+        env = self.environ = self.os_environ.copy()
+        self.add_cgi_vars()
+
+        env['wsgi.input']        = self.get_stdin()
+        env['wsgi.errors']       = self.get_stderr()
+        env['wsgi.version']      = self.wsgi_version
+        env['wsgi.run_once']     = self.wsgi_run_once
+        env['wsgi.url_scheme']   = self.get_scheme()
+        env['wsgi.multithread']  = self.wsgi_multithread
+        env['wsgi.multiprocess'] = self.wsgi_multiprocess
+
+        if self.wsgi_file_wrapper is not None:
+            env['wsgi.file_wrapper'] = self.wsgi_file_wrapper
+
+        if self.origin_server and self.server_software:
+            env.setdefault('SERVER_SOFTWARE',self.server_software)
+
+
+    def finish_response(self):
+        """Send any iterable data, then close self and the iterable
+
+        Subclasses intended for use in asynchronous servers will
+        want to redefine this method, such that it sets up callbacks
+        in the event loop to iterate over the data, and to call
+        'self.close()' once the response is finished.
+        """
+        try:
+            if not self.result_is_file() or not self.sendfile():
+                for data in self.result:
+                    self.write(data)
+                self.finish_content()
+        except:
+            # Call close() on the iterable returned by the WSGI application
+            # in case of an exception.
+            if hasattr(self.result, 'close'):
+                self.result.close()
+            raise
+        else:
+            # We only call close() when no exception is raised, because it
+            # will set status, result, headers, and environ fields to None.
+            # See bpo-29183 for more details.
+            self.close()
+
+
+    def get_scheme(self):
+        """Return the URL scheme being used"""
+        return guess_scheme(self.environ)
+
+
+    def set_content_length(self):
+        """Compute Content-Length or switch to chunked encoding if possible"""
+        try:
+            blocks = len(self.result)
+        except (TypeError,AttributeError,NotImplementedError):
+            pass
+        else:
+            if blocks==1:
+                self.headers['Content-Length'] = str(self.bytes_sent)
+                return
+        # XXX Try for chunked encoding if origin server and client is 1.1
+
+
+    def cleanup_headers(self):
+        """Make any necessary header changes or defaults
+
+        Subclasses can extend this to add other defaults.
+        """
+        if 'Content-Length' not in self.headers:
+            self.set_content_length()
+
+    def start_response(self, status, headers,exc_info=None):
+        """'start_response()' callable as specified by PEP 3333"""
+
+        if exc_info:
+            try:
+                if self.headers_sent:
+                    raise
+            finally:
+                exc_info = None        # avoid dangling circular ref
+        elif self.headers is not None:
+            raise AssertionError("Headers already set!")
+
+        self.status = status
+        self.headers = self.headers_class(headers)
+        status = self._convert_string_type(status, "Status")
+        self._validate_status(status)
+
+        if __debug__:
+            for name, val in headers:
+                name = self._convert_string_type(name, "Header name")
+                val = self._convert_string_type(val, "Header value")
+                assert not is_hop_by_hop(name),\
+                       f"Hop-by-hop header, '{name}: {val}', not allowed"
+
+        return self.write
+
+    def _validate_status(self, status):
+        if _name_disallowed_re.search(status):
+            raise ValueError("Control characters are not allowed in status")
+        if len(status) < 4:
+            raise AssertionError("Status must be at least 4 characters")
+        if not status[:3].isdigit():
+            raise AssertionError("Status message must begin w/3-digit code")
+        if status[3] != " ":
+            raise AssertionError("Status message must have a space after code")
+
+    def _convert_string_type(self, value, title):
+        """Convert/check value type."""
+        if type(value) is str:
+            return value
+        raise AssertionError(
+            "{0} must be of type str (got {1})".format(title, repr(value))
+        )
+
+    def send_preamble(self):
+        """Transmit version/status/date/server, via self._write()"""
+        if self.origin_server:
+            if self.client_is_modern():
+                self._write(('HTTP/%s %s\r\n' % (self.http_version,self.status)).encode('iso-8859-1'))
+                if 'Date' not in self.headers:
+                    self._write(
+                        ('Date: %s\r\n' % format_date_time(time.time())).encode('iso-8859-1')
+                    )
+                if self.server_software and 'Server' not in self.headers:
+                    self._write(('Server: %s\r\n' % self.server_software).encode('iso-8859-1'))
+        else:
+            self._write(('Status: %s\r\n' % self.status).encode('iso-8859-1'))
+
+    def write(self, data):
+        """'write()' callable as specified by PEP 3333"""
+
+        assert type(data) is bytes, \
+            "write() argument must be a bytes instance"
+
+        if not self.status:
+            raise AssertionError("write() before start_response()")
+
+        elif not self.headers_sent:
+            # Before the first output, send the stored headers
+            self.bytes_sent = len(data)    # make sure we know content-length
+            self.send_headers()
+        else:
+            self.bytes_sent += len(data)
+
+        # XXX check Content-Length and truncate if too many bytes written?
+        self._write(data)
+        self._flush()
+
+
+    def sendfile(self):
+        """Platform-specific file transmission
+
+        Override this method in subclasses to support platform-specific
+        file transmission.  It is only called if the application's
+        return iterable ('self.result') is an instance of
+        'self.wsgi_file_wrapper'.
+
+        This method should return a true value if it was able to actually
+        transmit the wrapped file-like object using a platform-specific
+        approach.  It should return a false value if normal iteration
+        should be used instead.  An exception can be raised to indicate
+        that transmission was attempted, but failed.
+
+        NOTE: this method should call 'self.send_headers()' if
+        'self.headers_sent' is false and it is going to attempt direct
+        transmission of the file.
+        """
+        return False   # No platform-specific transmission by default
+
+
+    def finish_content(self):
+        """Ensure headers and content have both been sent"""
+        if not self.headers_sent:
+            # Only zero Content-Length if not set by the application (so
+            # that HEAD requests can be satisfied properly, see #3839)
+            self.headers.setdefault('Content-Length', "0")
+            self.send_headers()
+        else:
+            pass # XXX check if content-length was too short?
+
+    def close(self):
+        """Close the iterable (if needed) and reset all instance vars
+
+        Subclasses may want to also drop the client connection.
+        """
+        try:
+            if hasattr(self.result,'close'):
+                self.result.close()
+        finally:
+            self.result = self.headers = self.status = self.environ = None
+            self.bytes_sent = 0; self.headers_sent = False
+
+
+    def send_headers(self):
+        """Transmit headers to the client, via self._write()"""
+        self.cleanup_headers()
+        self.headers_sent = True
+        if not self.origin_server or self.client_is_modern():
+            self.send_preamble()
+            self._write(bytes(self.headers))
+
+
+    def result_is_file(self):
+        """True if 'self.result' is an instance of 'self.wsgi_file_wrapper'"""
+        wrapper = self.wsgi_file_wrapper
+        return wrapper is not None and isinstance(self.result,wrapper)
+
+
+    def client_is_modern(self):
+        """True if client can accept status and headers"""
+        return self.environ['SERVER_PROTOCOL'].upper() != 'HTTP/0.9'
+
+
+    def log_exception(self,exc_info):
+        """Log the 'exc_info' tuple in the server log
+
+        Subclasses may override to retarget the output or change its format.
+        """
+        try:
+            from traceback import print_exception
+            stderr = self.get_stderr()
+            print_exception(
+                exc_info[0], exc_info[1], exc_info[2],
+                self.traceback_limit, stderr
+            )
+            stderr.flush()
+        finally:
+            exc_info = None
+
+    def handle_error(self):
+        """Log current error, and send error output to client if possible"""
+        self.log_exception(sys.exc_info())
+        if not self.headers_sent:
+            self.result = self.error_output(self.environ, self.start_response)
+            self.finish_response()
+        # XXX else: attempt advanced recovery techniques for HTML or text?
+
+    def error_output(self, environ, start_response):
+        """WSGI mini-app to create error output
+
+        By default, this just uses the 'error_status', 'error_headers',
+        and 'error_body' attributes to generate an output page.  It can
+        be overridden in a subclass to dynamically generate diagnostics,
+        choose an appropriate message for the user's preferred language, etc.
+
+        Note, however, that it's not recommended from a security perspective to
+        spit out diagnostics to any old user; ideally, you should have to do
+        something special to enable diagnostic output, which is why we don't
+        include any here!
+        """
+        start_response(self.error_status,self.error_headers[:],sys.exc_info())
+        return [self.error_body]
+
+
+    # Pure abstract methods; *must* be overridden in subclasses
+
+    def _write(self,data):
+        """Override in subclass to buffer data for send to client
+
+        It's okay if this method actually transmits the data; BaseHandler
+        just separates write and flush operations for greater efficiency
+        when the underlying system actually has such a distinction.
+        """
+        raise NotImplementedError
+
+    def _flush(self):
+        """Override in subclass to force sending of recent '_write()' calls
+
+        It's okay if this method is a no-op (i.e., if '_write()' actually
+        sends the data.
+        """
+        raise NotImplementedError
+
+    def get_stdin(self):
+        """Override in subclass to return suitable 'wsgi.input'"""
+        raise NotImplementedError
+
+    def get_stderr(self):
+        """Override in subclass to return suitable 'wsgi.errors'"""
+        raise NotImplementedError
+
+    def add_cgi_vars(self):
+        """Override in subclass to insert CGI variables in 'self.environ'"""
+        raise NotImplementedError
+
+
+class SimpleHandler(BaseHandler):
+    """Handler that's just initialized with streams, environment, etc.
+
+    This handler subclass is intended for synchronous HTTP/1.0 origin servers,
+    and handles sending the entire response output, given the correct inputs.
+
+    Usage::
+
+        handler = SimpleHandler(
+            inp,out,err,env, multithread=False, multiprocess=True
+        )
+        handler.run(app)"""
+
+    def __init__(self,stdin,stdout,stderr,environ,
+        multithread=True, multiprocess=False
+    ):
+        self.stdin = stdin
+        self.stdout = stdout
+        self.stderr = stderr
+        self.base_env = environ
+        self.wsgi_multithread = multithread
+        self.wsgi_multiprocess = multiprocess
+
+    def get_stdin(self):
+        return self.stdin
+
+    def get_stderr(self):
+        return self.stderr
+
+    def add_cgi_vars(self):
+        self.environ.update(self.base_env)
+
+    def _write(self,data):
+        result = self.stdout.write(data)
+        if result is None or result == len(data):
+            return
+        from warnings import warn
+        warn("SimpleHandler.stdout.write() should not do partial writes",
+            DeprecationWarning)
+        while data := data[result:]:
+            result = self.stdout.write(data)
+
+    def _flush(self):
+        self.stdout.flush()
+        self._flush = self.stdout.flush
+
+
+class BaseCGIHandler(SimpleHandler):
+
+    """CGI-like systems using input/output/error streams and environ mapping
+
+    Usage::
+
+        handler = BaseCGIHandler(inp,out,err,env)
+        handler.run(app)
+
+    This handler class is useful for gateway protocols like ReadyExec and
+    FastCGI, that have usable input/output/error streams and an environment
+    mapping.  It's also the base class for CGIHandler, which just uses
+    sys.stdin, os.environ, and so on.
+
+    The constructor also takes keyword arguments 'multithread' and
+    'multiprocess' (defaulting to 'True' and 'False' respectively) to control
+    the configuration sent to the application.  It sets 'origin_server' to
+    False (to enable CGI-like output), and assumes that 'wsgi.run_once' is
+    False.
+    """
+
+    origin_server = False
+
+
+class CGIHandler(BaseCGIHandler):
+
+    """CGI-based invocation via sys.stdin/stdout/stderr and os.environ
+
+    Usage::
+
+        CGIHandler().run(app)
+
+    The difference between this class and BaseCGIHandler is that it always
+    uses 'wsgi.run_once' of 'True', 'wsgi.multithread' of 'False', and
+    'wsgi.multiprocess' of 'True'.  It does not take any initialization
+    parameters, but always uses 'sys.stdin', 'os.environ', and friends.
+
+    If you need to override any of these parameters, use BaseCGIHandler
+    instead.
+    """
+
+    wsgi_run_once = True
+    # Do not allow os.environ to leak between requests in Google App Engine
+    # and other multi-run CGI use cases.  This is not easily testable.
+    # See http://bugs.python.org/issue7250
+    os_environ = {}
+
+    def __init__(self):
+        BaseCGIHandler.__init__(
+            self, sys.stdin.buffer, sys.stdout.buffer, sys.stderr,
+            read_environ(), multithread=False, multiprocess=True
+        )
+
+
+class IISCGIHandler(BaseCGIHandler):
+    """CGI-based invocation with workaround for IIS path bug
+
+    This handler should be used in preference to CGIHandler when deploying on
+    Microsoft IIS without having set the config allowPathInfo option (IIS>=7)
+    or metabase allowPathInfoForScriptMappings (IIS<7).
+    """
+    wsgi_run_once = True
+    os_environ = {}
+
+    # By default, IIS gives a PATH_INFO that duplicates the SCRIPT_NAME at
+    # the front, causing problems for WSGI applications that wish to implement
+    # routing. This handler strips any such duplicated path.
+
+    # IIS can be configured to pass the correct PATH_INFO, but this causes
+    # another bug where PATH_TRANSLATED is wrong. Luckily this variable is
+    # rarely used and is not guaranteed by WSGI. On IIS<7, though, the
+    # setting can only be made on a vhost level, affecting all other script
+    # mappings, many of which break when exposed to the PATH_TRANSLATED bug.
+    # For this reason IIS<7 is almost never deployed with the fix. (Even IIS7
+    # rarely uses it because there is still no UI for it.)
+
+    # There is no way for CGI code to tell whether the option was set, so a
+    # separate handler class is provided.
+    def __init__(self):
+        environ= read_environ()
+        path = environ.get('PATH_INFO', '')
+        script = environ.get('SCRIPT_NAME', '')
+        if (path+'/').startswith(script+'/'):
+            environ['PATH_INFO'] = path[len(script):]
+        BaseCGIHandler.__init__(
+            self, sys.stdin.buffer, sys.stdout.buffer, sys.stderr,
+            environ, multithread=False, multiprocess=True
+        )
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/headers.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/headers.py
new file mode 100644
index 0000000000000000000000000000000000000000..eb6ea6a412dcc9061c66d5bca558c80d00d90521
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/headers.py
@@ -0,0 +1,192 @@
+"""Manage HTTP Response Headers
+
+Much of this module is red-handedly pilfered from email.message in the stdlib,
+so portions are Copyright (C) 2001 Python Software Foundation, and were
+written by Barry Warsaw.
+"""
+
+# Regular expression that matches 'special' characters in parameters, the
+# existence of which force quoting of the parameter value.
+import re
+tspecials = re.compile(r'[ \(\)<>@,;:\\"/\[\]\?=]')
+# Disallowed characters for headers and values.
+# HTAB (\x09) is allowed in header values, but
+# not in header names. (RFC 9110 Section 5.5)
+_name_disallowed_re = re.compile(r'[\x00-\x1F\x7F]')
+_value_disallowed_re = re.compile(r'[\x00-\x08\x0A-\x1F\x7F]')
+
+def _formatparam(param, value=None, quote=1):
+    """Convenience function to format and return a key=value pair.
+
+    This will quote the value if needed or if quote is true.
+    """
+    if value is not None and len(value) > 0:
+        if quote or tspecials.search(value):
+            value = value.replace('\\', '\\\\').replace('"', r'\"')
+            return '%s="%s"' % (param, value)
+        else:
+            return '%s=%s' % (param, value)
+    else:
+        return param
+
+
+class Headers:
+    """Manage a collection of HTTP response headers"""
+
+    def __init__(self, headers=None):
+        headers = headers if headers is not None else []
+        if type(headers) is not list:
+            raise TypeError("Headers must be a list of name/value tuples")
+        self._headers = headers
+        if __debug__:
+            for k, v in headers:
+                self._convert_string_type(k, name=True)
+                self._convert_string_type(v, name=False)
+
+    def _convert_string_type(self, value, *, name):
+        """Convert/check value type."""
+        if type(value) is str:
+            regex = (_name_disallowed_re if name else _value_disallowed_re)
+            if regex.search(value):
+                raise ValueError("Control characters not allowed in headers")
+            return value
+        raise AssertionError("Header names/values must be"
+            " of type str (got {0})".format(repr(value)))
+
+    def __len__(self):
+        """Return the total number of headers, including duplicates."""
+        return len(self._headers)
+
+    def __setitem__(self, name, val):
+        """Set the value of a header."""
+        del self[name]
+        self._headers.append(
+            (self._convert_string_type(name, name=True), self._convert_string_type(val, name=False)))
+
+    def __delitem__(self,name):
+        """Delete all occurrences of a header, if present.
+
+        Does *not* raise an exception if the header is missing.
+        """
+        name = self._convert_string_type(name.lower(), name=True)
+        self._headers[:] = [kv for kv in self._headers if kv[0].lower() != name]
+
+    def __getitem__(self,name):
+        """Get the first header value for 'name'
+
+        Return None if the header is missing instead of raising an exception.
+
+        Note that if the header appeared multiple times, the first exactly which
+        occurrence gets returned is undefined.  Use getall() to get all
+        the values matching a header field name.
+        """
+        return self.get(name)
+
+    def __contains__(self, name):
+        """Return true if the message contains the header."""
+        return self.get(name) is not None
+
+
+    def get_all(self, name):
+        """Return a list of all the values for the named field.
+
+        These will be sorted in the order they appeared in the original header
+        list or were added to this instance, and may contain duplicates.  Any
+        fields deleted and re-inserted are always appended to the header list.
+        If no fields exist with the given name, returns an empty list.
+        """
+        name = self._convert_string_type(name.lower(), name=True)
+        return [kv[1] for kv in self._headers if kv[0].lower()==name]
+
+
+    def get(self,name,default=None):
+        """Get the first header value for 'name', or return 'default'"""
+        name = self._convert_string_type(name.lower(), name=True)
+        for k,v in self._headers:
+            if k.lower()==name:
+                return v
+        return default
+
+
+    def keys(self):
+        """Return a list of all the header field names.
+
+        These will be sorted in the order they appeared in the original header
+        list, or were added to this instance, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return [k for k, v in self._headers]
+
+    def values(self):
+        """Return a list of all header values.
+
+        These will be sorted in the order they appeared in the original header
+        list, or were added to this instance, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return [v for k, v in self._headers]
+
+    def items(self):
+        """Get all the header fields and values.
+
+        These will be sorted in the order they were in the original header
+        list, or were added to this instance, and may contain duplicates.
+        Any fields deleted and re-inserted are always appended to the header
+        list.
+        """
+        return self._headers[:]
+
+    def __repr__(self):
+        return "%s(%r)" % (self.__class__.__name__, self._headers)
+
+    def __str__(self):
+        """str() returns the formatted headers, complete with end line,
+        suitable for direct HTTP transmission."""
+        return '\r\n'.join(["%s: %s" % kv for kv in self._headers]+['',''])
+
+    def __bytes__(self):
+        return str(self).encode('iso-8859-1')
+
+    def setdefault(self,name,value):
+        """Return first matching header value for 'name', or 'value'
+
+        If there is no header named 'name', add a new header with name 'name'
+        and value 'value'."""
+        result = self.get(name)
+        if result is None:
+            self._headers.append((self._convert_string_type(name, name=True),
+                self._convert_string_type(value, name=False)))
+            return value
+        else:
+            return result
+
+    def add_header(self, _name, _value, **_params):
+        """Extended header setting.
+
+        _name is the header field to add.  keyword arguments can be used to set
+        additional parameters for the header field, with underscores converted
+        to dashes.  Normally the parameter will be added as key="value" unless
+        value is None, in which case only the key will be added.
+
+        Example:
+
+        h.add_header('content-disposition', 'attachment', filename='bud.gif')
+
+        Note that unlike the corresponding 'email.message' method, this does
+        *not* handle '(charset, language, value)' tuples: all values must be
+        strings or None.
+        """
+        parts = []
+        if _value is not None:
+            _value = self._convert_string_type(_value, name=False)
+            parts.append(_value)
+        for k, v in _params.items():
+            k = self._convert_string_type(k, name=True)
+            if v is None:
+                parts.append(k.replace('_', '-'))
+            else:
+                v = self._convert_string_type(v, name=False)
+                parts.append(_formatparam(k.replace('_', '-'), v))
+        self._headers.append((self._convert_string_type(_name, name=True), "; ".join(parts)))
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/simple_server.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/simple_server.py
new file mode 100644
index 0000000000000000000000000000000000000000..a0f2397fcf0006430534324fe679de3c78491ffa
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/simple_server.py
@@ -0,0 +1,161 @@
+"""BaseHTTPServer that implements the Python WSGI protocol (PEP 3333)
+
+This is both an example of how WSGI can be implemented, and a basis for running
+simple web applications on a local machine, such as might be done when testing
+or debugging an application.  It has not been reviewed for security issues,
+however, and we strongly recommend that you use a "real" web server for
+production use.
+
+For example usage, see the 'if __name__=="__main__"' block at the end of the
+module.  See also the BaseHTTPServer module docs for other API information.
+"""
+
+from http.server import BaseHTTPRequestHandler, HTTPServer
+import sys
+import urllib.parse
+from wsgiref.handlers import SimpleHandler
+from platform import python_implementation
+
+__version__ = "0.2"
+__all__ = ['WSGIServer', 'WSGIRequestHandler', 'demo_app', 'make_server']
+
+
+server_version = "WSGIServer/" + __version__
+sys_version = python_implementation() + "/" + sys.version.split()[0]
+software_version = server_version + ' ' + sys_version
+
+
+class ServerHandler(SimpleHandler):
+
+    server_software = software_version
+
+    def close(self):
+        try:
+            self.request_handler.log_request(
+                self.status.split(' ',1)[0], self.bytes_sent
+            )
+        finally:
+            SimpleHandler.close(self)
+
+
+
+class WSGIServer(HTTPServer):
+
+    """BaseHTTPServer that implements the Python WSGI protocol"""
+
+    application = None
+
+    def server_bind(self):
+        """Override server_bind to store the server name."""
+        HTTPServer.server_bind(self)
+        self.setup_environ()
+
+    def setup_environ(self):
+        # Set up base environment
+        env = self.base_environ = {}
+        env['SERVER_NAME'] = self.server_name
+        env['GATEWAY_INTERFACE'] = 'CGI/1.1'
+        env['SERVER_PORT'] = str(self.server_port)
+        env['REMOTE_HOST']=''
+        env['CONTENT_LENGTH']=''
+        env['SCRIPT_NAME'] = ''
+
+    def get_app(self):
+        return self.application
+
+    def set_app(self,application):
+        self.application = application
+
+
+
+class WSGIRequestHandler(BaseHTTPRequestHandler):
+
+    server_version = "WSGIServer/" + __version__
+
+    def get_environ(self):
+        env = self.server.base_environ.copy()
+        env['SERVER_PROTOCOL'] = self.request_version
+        env['SERVER_SOFTWARE'] = self.server_version
+        env['REQUEST_METHOD'] = self.command
+        if '?' in self.path:
+            path,query = self.path.split('?',1)
+        else:
+            path,query = self.path,''
+
+        env['PATH_INFO'] = urllib.parse.unquote(path, 'iso-8859-1')
+        env['QUERY_STRING'] = query
+        env['REMOTE_ADDR'] = self.client_address[0]
+
+        if self.headers.get('content-type') is None:
+            env['CONTENT_TYPE'] = self.headers.get_content_type()
+        else:
+            env['CONTENT_TYPE'] = self.headers['content-type']
+
+        length = self.headers.get('content-length')
+        if length:
+            env['CONTENT_LENGTH'] = length
+
+        for k, v in self.headers.items():
+            k=k.replace('-','_').upper(); v=v.strip()
+            if k in env:
+                continue                    # skip content length, type,etc.
+            if 'HTTP_'+k in env:
+                env['HTTP_'+k] += ','+v     # comma-separate multiple headers
+            else:
+                env['HTTP_'+k] = v
+        return env
+
+    def get_stderr(self):
+        return sys.stderr
+
+    def handle(self):
+        """Handle a single HTTP request"""
+
+        self.raw_requestline = self.rfile.readline(65537)
+        if len(self.raw_requestline) > 65536:
+            self.requestline = ''
+            self.request_version = ''
+            self.command = ''
+            self.send_error(414)
+            return
+
+        if not self.parse_request(): # An error code has been sent, just exit
+            return
+
+        handler = ServerHandler(
+            self.rfile, self.wfile, self.get_stderr(), self.get_environ(),
+            multithread=False,
+        )
+        handler.request_handler = self      # backpointer for logging
+        handler.run(self.server.get_app())
+
+
+
+def demo_app(environ,start_response):
+    from io import StringIO
+    stdout = StringIO()
+    print("Hello world!", file=stdout)
+    print(file=stdout)
+    h = sorted(environ.items())
+    for k,v in h:
+        print(k,'=',repr(v), file=stdout)
+    start_response("200 OK", [('Content-Type','text/plain; charset=utf-8')])
+    return [stdout.getvalue().encode("utf-8")]
+
+
+def make_server(
+    host, port, app, server_class=WSGIServer, handler_class=WSGIRequestHandler
+):
+    """Create a new WSGI server listening on `host` and `port` for `app`"""
+    server = server_class((host, port), handler_class)
+    server.set_app(app)
+    return server
+
+
+if __name__ == '__main__':
+    with make_server('', 8000, demo_app) as httpd:
+        sa = httpd.socket.getsockname()
+        print("Serving HTTP on", sa[0], "port", sa[1], "...")
+        import webbrowser
+        webbrowser.open('http://localhost:8000/xyz?abc')
+        httpd.handle_request()  # serve one request, then exit
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/types.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/types.py
new file mode 100644
index 0000000000000000000000000000000000000000..ef0aead5b28b647bd1ad49fef80a490fbd2dc1a8
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/types.py
@@ -0,0 +1,54 @@
+"""WSGI-related types for static type checking"""
+
+from collections.abc import Callable, Iterable, Iterator
+from types import TracebackType
+from typing import Any, Protocol, TypeAlias
+
+__all__ = [
+    "StartResponse",
+    "WSGIEnvironment",
+    "WSGIApplication",
+    "InputStream",
+    "ErrorStream",
+    "FileWrapper",
+]
+
+_ExcInfo: TypeAlias = tuple[type[BaseException], BaseException, TracebackType]
+_OptExcInfo: TypeAlias = _ExcInfo | tuple[None, None, None]
+
+class StartResponse(Protocol):
+    """start_response() callable as defined in PEP 3333"""
+    def __call__(
+        self,
+        status: str,
+        headers: list[tuple[str, str]],
+        exc_info: _OptExcInfo | None = ...,
+        /,
+    ) -> Callable[[bytes], object]: ...
+
+WSGIEnvironment: TypeAlias = dict[str, Any]
+WSGIApplication: TypeAlias = Callable[[WSGIEnvironment, StartResponse],
+    Iterable[bytes]]
+
+class InputStream(Protocol):
+    """WSGI input stream as defined in PEP 3333"""
+    def read(self, size: int = ..., /) -> bytes: ...
+    def readline(self, size: int = ..., /) -> bytes: ...
+    def readlines(self, hint: int = ..., /) -> list[bytes]: ...
+    def __iter__(self) -> Iterator[bytes]: ...
+
+class ErrorStream(Protocol):
+    """WSGI error stream as defined in PEP 3333"""
+    def flush(self) -> object: ...
+    def write(self, s: str, /) -> object: ...
+    def writelines(self, seq: list[str], /) -> object: ...
+
+class _Readable(Protocol):
+    def read(self, size: int = ..., /) -> bytes: ...
+    # Optional: def close(self) -> object: ...
+
+class FileWrapper(Protocol):
+    """WSGI file wrapper as defined in PEP 3333"""
+    def __call__(
+        self, file: _Readable, block_size: int = ..., /,
+    ) -> Iterable[bytes]: ...
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/util.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/util.py
new file mode 100644
index 0000000000000000000000000000000000000000..63b923317373f5d405ddaebbb035f2df85450b8f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/util.py
@@ -0,0 +1,159 @@
+"""Miscellaneous WSGI-related Utilities"""
+
+import posixpath
+
+__all__ = [
+    'FileWrapper', 'guess_scheme', 'application_uri', 'request_uri',
+    'shift_path_info', 'setup_testing_defaults', 'is_hop_by_hop',
+]
+
+
+class FileWrapper:
+    """Wrapper to convert file-like objects to iterables"""
+
+    def __init__(self, filelike, blksize=8192):
+        self.filelike = filelike
+        self.blksize = blksize
+        if hasattr(filelike,'close'):
+            self.close = filelike.close
+
+    def __iter__(self):
+        return self
+
+    def __next__(self):
+        data = self.filelike.read(self.blksize)
+        if data:
+            return data
+        raise StopIteration
+
+def guess_scheme(environ):
+    """Return a guess for whether 'wsgi.url_scheme' should be 'http' or 'https'
+    """
+    if environ.get("HTTPS") in ('yes','on','1'):
+        return 'https'
+    else:
+        return 'http'
+
+def application_uri(environ):
+    """Return the application's base URI (no PATH_INFO or QUERY_STRING)"""
+    url = environ['wsgi.url_scheme']+'://'
+    from urllib.parse import quote
+
+    if environ.get('HTTP_HOST'):
+        url += environ['HTTP_HOST']
+    else:
+        url += environ['SERVER_NAME']
+
+        if environ['wsgi.url_scheme'] == 'https':
+            if environ['SERVER_PORT'] != '443':
+                url += ':' + environ['SERVER_PORT']
+        else:
+            if environ['SERVER_PORT'] != '80':
+                url += ':' + environ['SERVER_PORT']
+
+    url += quote(environ.get('SCRIPT_NAME') or '/', encoding='latin1')
+    return url
+
+def request_uri(environ, include_query=True):
+    """Return the full request URI, optionally including the query string"""
+    url = application_uri(environ)
+    from urllib.parse import quote
+    path_info = quote(environ.get('PATH_INFO',''), safe='/;=,', encoding='latin1')
+    if not environ.get('SCRIPT_NAME'):
+        url += path_info[1:]
+    else:
+        url += path_info
+    if include_query and environ.get('QUERY_STRING'):
+        url += '?' + environ['QUERY_STRING']
+    return url
+
+def shift_path_info(environ):
+    """Shift a name from PATH_INFO to SCRIPT_NAME, returning it
+
+    If there are no remaining path segments in PATH_INFO, return None.
+    Note: 'environ' is modified in-place; use a copy if you need to keep
+    the original PATH_INFO or SCRIPT_NAME.
+
+    Note: when PATH_INFO is just a '/', this returns '' and appends a trailing
+    '/' to SCRIPT_NAME, even though empty path segments are normally ignored,
+    and SCRIPT_NAME doesn't normally end in a '/'.  This is intentional
+    behavior, to ensure that an application can tell the difference between
+    '/x' and '/x/' when traversing to objects.
+    """
+    path_info = environ.get('PATH_INFO','')
+    if not path_info:
+        return None
+
+    path_parts = path_info.split('/')
+    path_parts[1:-1] = [p for p in path_parts[1:-1] if p and p != '.']
+    name = path_parts[1]
+    del path_parts[1]
+
+    script_name = environ.get('SCRIPT_NAME','')
+    script_name = posixpath.normpath(script_name+'/'+name)
+    if script_name.endswith('/'):
+        script_name = script_name[:-1]
+    if not name and not script_name.endswith('/'):
+        script_name += '/'
+
+    environ['SCRIPT_NAME'] = script_name
+    environ['PATH_INFO']   = '/'.join(path_parts)
+
+    # Special case: '/.' on PATH_INFO doesn't get stripped,
+    # because we don't strip the last element of PATH_INFO
+    # if there's only one path part left.  Instead of fixing this
+    # above, we fix it here so that PATH_INFO gets normalized to
+    # an empty string in the environ.
+    if name=='.':
+        name = None
+    return name
+
+def setup_testing_defaults(environ):
+    """Update 'environ' with trivial defaults for testing purposes
+
+    This adds various parameters required for WSGI, including HTTP_HOST,
+    SERVER_NAME, SERVER_PORT, REQUEST_METHOD, SCRIPT_NAME, PATH_INFO,
+    and all of the wsgi.* variables.  It only supplies default values,
+    and does not replace any existing settings for these variables.
+
+    This routine is intended to make it easier for unit tests of WSGI
+    servers and applications to set up dummy environments.  It should *not*
+    be used by actual WSGI servers or applications, since the data is fake!
+    """
+
+    environ.setdefault('SERVER_NAME','127.0.0.1')
+    environ.setdefault('SERVER_PROTOCOL','HTTP/1.0')
+
+    environ.setdefault('HTTP_HOST',environ['SERVER_NAME'])
+    environ.setdefault('REQUEST_METHOD','GET')
+
+    if 'SCRIPT_NAME' not in environ and 'PATH_INFO' not in environ:
+        environ.setdefault('SCRIPT_NAME','')
+        environ.setdefault('PATH_INFO','/')
+
+    environ.setdefault('wsgi.version', (1,0))
+    environ.setdefault('wsgi.run_once', 0)
+    environ.setdefault('wsgi.multithread', 0)
+    environ.setdefault('wsgi.multiprocess', 0)
+
+    from io import StringIO, BytesIO
+    environ.setdefault('wsgi.input', BytesIO())
+    environ.setdefault('wsgi.errors', StringIO())
+    environ.setdefault('wsgi.url_scheme',guess_scheme(environ))
+
+    if environ['wsgi.url_scheme']=='http':
+        environ.setdefault('SERVER_PORT', '80')
+    elif environ['wsgi.url_scheme']=='https':
+        environ.setdefault('SERVER_PORT', '443')
+
+
+
+_hoppish = {
+    'connection', 'keep-alive', 'proxy-authenticate',
+    'proxy-authorization', 'te', 'trailers', 'transfer-encoding',
+    'upgrade'
+}.__contains__
+
+def is_hop_by_hop(header_name):
+    """Return true if 'header_name' is an HTTP/1.1 "Hop-by-Hop" header"""
+    return _hoppish(header_name.lower())
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/validate.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/validate.py
new file mode 100644
index 0000000000000000000000000000000000000000..1a1853cd63a0d2aedcdb93e5f692040e48c9092e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/wsgiref/validate.py
@@ -0,0 +1,438 @@
+# (c) 2005 Ian Bicking and contributors; written for Paste (http://pythonpaste.org)
+# Licensed under the MIT license: https://opensource.org/licenses/mit-license.php
+# Also licenced under the Apache License, 2.0: https://opensource.org/licenses/apache2.0.php
+# Licensed to PSF under a Contributor Agreement
+"""
+Middleware to check for obedience to the WSGI specification.
+
+Some of the things this checks:
+
+* Signature of the application and start_response (including that
+  keyword arguments are not used).
+
+* Environment checks:
+
+  - Environment is a dictionary (and not a subclass).
+
+  - That all the required keys are in the environment: REQUEST_METHOD,
+    SERVER_NAME, SERVER_PORT, wsgi.version, wsgi.input, wsgi.errors,
+    wsgi.multithread, wsgi.multiprocess, wsgi.run_once
+
+  - That HTTP_CONTENT_TYPE and HTTP_CONTENT_LENGTH are not in the
+    environment (these headers should appear as CONTENT_LENGTH and
+    CONTENT_TYPE).
+
+  - Warns if QUERY_STRING is missing, as the cgi module acts
+    unpredictably in that case.
+
+  - That CGI-style variables (that don't contain a .) have
+    (non-unicode) string values
+
+  - That wsgi.version is a tuple
+
+  - That wsgi.url_scheme is 'http' or 'https' (@@: is this too
+    restrictive?)
+
+  - Warns if the REQUEST_METHOD is not known (@@: probably too
+    restrictive).
+
+  - That SCRIPT_NAME and PATH_INFO are empty or start with /
+
+  - That at least one of SCRIPT_NAME or PATH_INFO are set.
+
+  - That CONTENT_LENGTH is a positive integer.
+
+  - That SCRIPT_NAME is not '/' (it should be '', and PATH_INFO should
+    be '/').
+
+  - That wsgi.input has the methods read, readline, readlines, and
+    __iter__
+
+  - That wsgi.errors has the methods flush, write, writelines
+
+* The status is a string, contains a space, starts with an integer,
+  and that integer is in range (> 100).
+
+* That the headers is a list (not a subclass, not another kind of
+  sequence).
+
+* That the items of the headers are tuples of strings.
+
+* That there is no 'status' header (that is used in CGI, but not in
+  WSGI).
+
+* That the headers don't contain newlines or colons, end in _ or -, or
+  contain characters codes below 037.
+
+* That Content-Type is given if there is content (CGI often has a
+  default content type, but WSGI does not).
+
+* That no Content-Type is given when there is no content (@@: is this
+  too restrictive?)
+
+* That the exc_info argument to start_response is a tuple or None.
+
+* That all calls to the writer are with strings, and no other methods
+  on the writer are accessed.
+
+* That wsgi.input is used properly:
+
+  - .read() is called with exactly one argument
+
+  - That it returns a string
+
+  - That readline, readlines, and __iter__ return strings
+
+  - That .close() is not called
+
+  - No other methods are provided
+
+* That wsgi.errors is used properly:
+
+  - .write() and .writelines() is called with a string
+
+  - That .close() is not called, and no other methods are provided.
+
+* The response iterator:
+
+  - That it is not a string (it should be a list of a single string; a
+    string will work, but perform horribly).
+
+  - That .__next__() returns a string
+
+  - That the iterator is not iterated over until start_response has
+    been called (that can signal either a server or application
+    error).
+
+  - That .close() is called (doesn't raise exception, only prints to
+    sys.stderr, because we only know it isn't called when the object
+    is garbage collected).
+"""
+__all__ = ['validator']
+
+
+import re
+import sys
+import warnings
+
+header_re = re.compile(r'^[a-zA-Z][a-zA-Z0-9\-_]*$')
+bad_header_value_re = re.compile(r'[\000-\037]')
+
+class WSGIWarning(Warning):
+    """
+    Raised in response to WSGI-spec-related warnings
+    """
+
+def assert_(cond, *args):
+    if not cond:
+        raise AssertionError(*args)
+
+def check_string_type(value, title):
+    if type (value) is str:
+        return value
+    raise AssertionError(
+        "{0} must be of type str (got {1})".format(title, repr(value)))
+
+def validator(application):
+
+    """
+    When applied between a WSGI server and a WSGI application, this
+    middleware will check for WSGI compliance on a number of levels.
+    This middleware does not modify the request or response in any
+    way, but will raise an AssertionError if anything seems off
+    (except for a failure to close the application iterator, which
+    will be printed to stderr -- there's no way to raise an exception
+    at that point).
+    """
+
+    def lint_app(*args, **kw):
+        assert_(len(args) == 2, "Two arguments required")
+        assert_(not kw, "No keyword arguments allowed")
+        environ, start_response = args
+
+        check_environ(environ)
+
+        # We use this to check if the application returns without
+        # calling start_response:
+        start_response_started = []
+
+        def start_response_wrapper(*args, **kw):
+            assert_(len(args) == 2 or len(args) == 3, (
+                "Invalid number of arguments: %s" % (args,)))
+            assert_(not kw, "No keyword arguments allowed")
+            status = args[0]
+            headers = args[1]
+            if len(args) == 3:
+                exc_info = args[2]
+            else:
+                exc_info = None
+
+            check_status(status)
+            check_headers(headers)
+            check_content_type(status, headers)
+            check_exc_info(exc_info)
+
+            start_response_started.append(None)
+            return WriteWrapper(start_response(*args))
+
+        environ['wsgi.input'] = InputWrapper(environ['wsgi.input'])
+        environ['wsgi.errors'] = ErrorWrapper(environ['wsgi.errors'])
+
+        iterator = application(environ, start_response_wrapper)
+        assert_(iterator is not None and iterator != False,
+            "The application must return an iterator, if only an empty list")
+
+        check_iterator(iterator)
+
+        return IteratorWrapper(iterator, start_response_started)
+
+    return lint_app
+
+class InputWrapper:
+
+    def __init__(self, wsgi_input):
+        self.input = wsgi_input
+
+    def read(self, *args):
+        assert_(len(args) == 1)
+        v = self.input.read(*args)
+        assert_(type(v) is bytes)
+        return v
+
+    def readline(self, *args):
+        assert_(len(args) <= 1)
+        v = self.input.readline(*args)
+        assert_(type(v) is bytes)
+        return v
+
+    def readlines(self, *args):
+        assert_(len(args) <= 1)
+        lines = self.input.readlines(*args)
+        assert_(type(lines) is list)
+        for line in lines:
+            assert_(type(line) is bytes)
+        return lines
+
+    def __iter__(self):
+        while line := self.readline():
+            yield line
+
+    def close(self):
+        assert_(0, "input.close() must not be called")
+
+class ErrorWrapper:
+
+    def __init__(self, wsgi_errors):
+        self.errors = wsgi_errors
+
+    def write(self, s):
+        assert_(type(s) is str)
+        self.errors.write(s)
+
+    def flush(self):
+        self.errors.flush()
+
+    def writelines(self, seq):
+        for line in seq:
+            self.write(line)
+
+    def close(self):
+        assert_(0, "errors.close() must not be called")
+
+class WriteWrapper:
+
+    def __init__(self, wsgi_writer):
+        self.writer = wsgi_writer
+
+    def __call__(self, s):
+        assert_(type(s) is bytes)
+        self.writer(s)
+
+class PartialIteratorWrapper:
+
+    def __init__(self, wsgi_iterator):
+        self.iterator = wsgi_iterator
+
+    def __iter__(self):
+        # We want to make sure __iter__ is called
+        return IteratorWrapper(self.iterator, None)
+
+class IteratorWrapper:
+
+    def __init__(self, wsgi_iterator, check_start_response):
+        self.original_iterator = wsgi_iterator
+        self.iterator = iter(wsgi_iterator)
+        self.closed = False
+        self.check_start_response = check_start_response
+
+    def __iter__(self):
+        return self
+
+    def __next__(self):
+        assert_(not self.closed,
+            "Iterator read after closed")
+        v = next(self.iterator)
+        if type(v) is not bytes:
+            assert_(False, "Iterator yielded non-bytestring (%r)" % (v,))
+        if self.check_start_response is not None:
+            assert_(self.check_start_response,
+                "The application returns and we started iterating over its body, but start_response has not yet been called")
+            self.check_start_response = None
+        return v
+
+    def close(self):
+        self.closed = True
+        if hasattr(self.original_iterator, 'close'):
+            self.original_iterator.close()
+
+    def __del__(self):
+        if not self.closed:
+            sys.stderr.write(
+                "Iterator garbage collected without being closed")
+        assert_(self.closed,
+            "Iterator garbage collected without being closed")
+
+def check_environ(environ):
+    assert_(type(environ) is dict,
+        "Environment is not of the right type: %r (environment: %r)"
+        % (type(environ), environ))
+
+    for key in ['REQUEST_METHOD', 'SERVER_NAME', 'SERVER_PORT',
+                'wsgi.version', 'wsgi.input', 'wsgi.errors',
+                'wsgi.multithread', 'wsgi.multiprocess',
+                'wsgi.run_once']:
+        assert_(key in environ,
+            "Environment missing required key: %r" % (key,))
+
+    for key in ['HTTP_CONTENT_TYPE', 'HTTP_CONTENT_LENGTH']:
+        assert_(key not in environ,
+            "Environment should not have the key: %s "
+            "(use %s instead)" % (key, key[5:]))
+
+    if 'QUERY_STRING' not in environ:
+        warnings.warn(
+            'QUERY_STRING is not in the WSGI environment; the cgi '
+            'module will use sys.argv when this variable is missing, '
+            'so application errors are more likely',
+            WSGIWarning)
+
+    for key in environ.keys():
+        if '.' in key:
+            # Extension, we don't care about its type
+            continue
+        assert_(type(environ[key]) is str,
+            "Environmental variable %s is not a string: %r (value: %r)"
+            % (key, type(environ[key]), environ[key]))
+
+    assert_(type(environ['wsgi.version']) is tuple,
+        "wsgi.version should be a tuple (%r)" % (environ['wsgi.version'],))
+    assert_(environ['wsgi.url_scheme'] in ('http', 'https'),
+        "wsgi.url_scheme unknown: %r" % environ['wsgi.url_scheme'])
+
+    check_input(environ['wsgi.input'])
+    check_errors(environ['wsgi.errors'])
+
+    # @@: these need filling out:
+    if environ['REQUEST_METHOD'] not in (
+        'GET', 'HEAD', 'POST', 'OPTIONS', 'PATCH', 'PUT', 'DELETE', 'TRACE'):
+        warnings.warn(
+            "Unknown REQUEST_METHOD: %r" % environ['REQUEST_METHOD'],
+            WSGIWarning)
+
+    assert_(not environ.get('SCRIPT_NAME')
+            or environ['SCRIPT_NAME'].startswith('/'),
+        "SCRIPT_NAME doesn't start with /: %r" % environ['SCRIPT_NAME'])
+    assert_(not environ.get('PATH_INFO')
+            or environ['PATH_INFO'].startswith('/'),
+        "PATH_INFO doesn't start with /: %r" % environ['PATH_INFO'])
+    if environ.get('CONTENT_LENGTH'):
+        assert_(int(environ['CONTENT_LENGTH']) >= 0,
+            "Invalid CONTENT_LENGTH: %r" % environ['CONTENT_LENGTH'])
+
+    if not environ.get('SCRIPT_NAME'):
+        assert_('PATH_INFO' in environ,
+            "One of SCRIPT_NAME or PATH_INFO are required (PATH_INFO "
+            "should at least be '/' if SCRIPT_NAME is empty)")
+    assert_(environ.get('SCRIPT_NAME') != '/',
+        "SCRIPT_NAME cannot be '/'; it should instead be '', and "
+        "PATH_INFO should be '/'")
+
+def check_input(wsgi_input):
+    for attr in ['read', 'readline', 'readlines', '__iter__']:
+        assert_(hasattr(wsgi_input, attr),
+            "wsgi.input (%r) doesn't have the attribute %s"
+            % (wsgi_input, attr))
+
+def check_errors(wsgi_errors):
+    for attr in ['flush', 'write', 'writelines']:
+        assert_(hasattr(wsgi_errors, attr),
+            "wsgi.errors (%r) doesn't have the attribute %s"
+            % (wsgi_errors, attr))
+
+def check_status(status):
+    status = check_string_type(status, "Status")
+    # Implicitly check that we can turn it into an integer:
+    status_code = status.split(None, 1)[0]
+    assert_(len(status_code) == 3,
+        "Status codes must be three characters: %r" % status_code)
+    status_int = int(status_code)
+    assert_(status_int >= 100, "Status code is invalid: %r" % status_int)
+    if len(status) < 4 or status[3] != ' ':
+        warnings.warn(
+            "The status string (%r) should be a three-digit integer "
+            "followed by a single space and a status explanation"
+            % status, WSGIWarning)
+
+def check_headers(headers):
+    assert_(type(headers) is list,
+        "Headers (%r) must be of type list: %r"
+        % (headers, type(headers)))
+    for item in headers:
+        assert_(type(item) is tuple,
+            "Individual headers (%r) must be of type tuple: %r"
+            % (item, type(item)))
+        assert_(len(item) == 2)
+        name, value = item
+        name = check_string_type(name, "Header name")
+        value = check_string_type(value, "Header value")
+        assert_(name.lower() != 'status',
+            "The Status header cannot be used; it conflicts with CGI "
+            "script, and HTTP status is not given through headers "
+            "(value: %r)." % value)
+        assert_('\n' not in name and ':' not in name,
+            "Header names may not contain ':' or '\\n': %r" % name)
+        assert_(header_re.search(name), "Bad header name: %r" % name)
+        assert_(not name.endswith('-') and not name.endswith('_'),
+            "Names may not end in '-' or '_': %r" % name)
+        if bad_header_value_re.search(value):
+            assert_(0, "Bad header value: %r (bad char: %r)"
+            % (value, bad_header_value_re.search(value).group(0)))
+
+def check_content_type(status, headers):
+    status = check_string_type(status, "Status")
+    code = int(status.split(None, 1)[0])
+    # @@: need one more person to verify this interpretation of RFC 2616
+    #     http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
+    NO_MESSAGE_BODY = (204, 304)
+    for name, value in headers:
+        name = check_string_type(name, "Header name")
+        if name.lower() == 'content-type':
+            if code not in NO_MESSAGE_BODY:
+                return
+            assert_(0, ("Content-Type header found in a %s response, "
+                        "which must not return content.") % code)
+    if code not in NO_MESSAGE_BODY:
+        assert_(0, "No Content-Type header found in headers (%s)" % headers)
+
+def check_exc_info(exc_info):
+    assert_(exc_info is None or type(exc_info) is tuple,
+        "exc_info (%r) is not a tuple: %r" % (exc_info, type(exc_info)))
+    # More exc_info checks?
+
+def check_iterator(iterator):
+    # Technically a bytestring is legal, which is why it's a really bad
+    # idea, because it may cause the response to be returned
+    # character-by-character
+    assert_(not isinstance(iterator, (str, bytes)),
+        "You should not return a string as your application iterator, "
+        "instead return a single-item list containing a bytestring.")
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xml/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xml/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..bf6d8ddfd04c934003004472d7f03bfa3f06b5f5
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xml/__init__.py
@@ -0,0 +1,20 @@
+"""Core XML support for Python.
+
+This package contains four sub-packages:
+
+dom -- The W3C Document Object Model.  This supports DOM Level 1 +
+       Namespaces.
+
+parsers -- Python wrappers for XML parsers (currently only supports Expat).
+
+sax -- The Simple API for XML, developed by XML-Dev, led by David
+       Megginson and ported to Python by Lars Marius Garshol.  This
+       supports the SAX 2 API.
+
+etree -- The ElementTree XML library.  This is a subset of the full
+       ElementTree XML release.
+
+"""
+
+
+__all__ = ["dom", "parsers", "sax", "etree"]
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..196d3788575993eb403588b01ac6b0a3fbba13da
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/__init__.py
@@ -0,0 +1 @@
+# This directory is a Python package.
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/client.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/client.py
new file mode 100644
index 0000000000000000000000000000000000000000..f441376d09c4aa2ea88aef83fcd14ecc9e8db82f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/client.py
@@ -0,0 +1,1503 @@
+#
+# XML-RPC CLIENT LIBRARY
+# $Id$
+#
+# an XML-RPC client interface for Python.
+#
+# the marshalling and response parser code can also be used to
+# implement XML-RPC servers.
+#
+# Notes:
+# this version is designed to work with Python 2.1 or newer.
+#
+# History:
+# 1999-01-14 fl  Created
+# 1999-01-15 fl  Changed dateTime to use localtime
+# 1999-01-16 fl  Added Binary/base64 element, default to RPC2 service
+# 1999-01-19 fl  Fixed array data element (from Skip Montanaro)
+# 1999-01-21 fl  Fixed dateTime constructor, etc.
+# 1999-02-02 fl  Added fault handling, handle empty sequences, etc.
+# 1999-02-10 fl  Fixed problem with empty responses (from Skip Montanaro)
+# 1999-06-20 fl  Speed improvements, pluggable parsers/transports (0.9.8)
+# 2000-11-28 fl  Changed boolean to check the truth value of its argument
+# 2001-02-24 fl  Added encoding/Unicode/SafeTransport patches
+# 2001-02-26 fl  Added compare support to wrappers (0.9.9/1.0b1)
+# 2001-03-28 fl  Make sure response tuple is a singleton
+# 2001-03-29 fl  Don't require empty params element (from Nicholas Riley)
+# 2001-06-10 fl  Folded in _xmlrpclib accelerator support (1.0b2)
+# 2001-08-20 fl  Base xmlrpclib.Error on built-in Exception (from Paul Prescod)
+# 2001-09-03 fl  Allow Transport subclass to override getparser
+# 2001-09-10 fl  Lazy import of urllib, cgi, xmllib (20x import speedup)
+# 2001-10-01 fl  Remove containers from memo cache when done with them
+# 2001-10-01 fl  Use faster escape method (80% dumps speedup)
+# 2001-10-02 fl  More dumps microtuning
+# 2001-10-04 fl  Make sure import expat gets a parser (from Guido van Rossum)
+# 2001-10-10 sm  Allow long ints to be passed as ints if they don't overflow
+# 2001-10-17 sm  Test for int and long overflow (allows use on 64-bit systems)
+# 2001-11-12 fl  Use repr() to marshal doubles (from Paul Felix)
+# 2002-03-17 fl  Avoid buffered read when possible (from James Rucker)
+# 2002-04-07 fl  Added pythondoc comments
+# 2002-04-16 fl  Added __str__ methods to datetime/binary wrappers
+# 2002-05-15 fl  Added error constants (from Andrew Kuchling)
+# 2002-06-27 fl  Merged with Python CVS version
+# 2002-10-22 fl  Added basic authentication (based on code from Phillip Eby)
+# 2003-01-22 sm  Add support for the bool type
+# 2003-02-27 gvr Remove apply calls
+# 2003-04-24 sm  Use cStringIO if available
+# 2003-04-25 ak  Add support for nil
+# 2003-06-15 gn  Add support for time.struct_time
+# 2003-07-12 gp  Correct marshalling of Faults
+# 2003-10-31 mvl Add multicall support
+# 2004-08-20 mvl Bump minimum supported Python version to 2.1
+# 2014-12-02 ch/doko  Add workaround for gzip bomb vulnerability
+#
+# Copyright (c) 1999-2002 by Secret Labs AB.
+# Copyright (c) 1999-2002 by Fredrik Lundh.
+#
+# info@pythonware.com
+# http://www.pythonware.com
+#
+# --------------------------------------------------------------------
+# The XML-RPC client interface is
+#
+# Copyright (c) 1999-2002 by Secret Labs AB
+# Copyright (c) 1999-2002 by Fredrik Lundh
+#
+# By obtaining, using, and/or copying this software and/or its
+# associated documentation, you agree that you have read, understood,
+# and will comply with the following terms and conditions:
+#
+# Permission to use, copy, modify, and distribute this software and
+# its associated documentation for any purpose and without fee is
+# hereby granted, provided that the above copyright notice appears in
+# all copies, and that both that copyright notice and this permission
+# notice appear in supporting documentation, and that the name of
+# Secret Labs AB or the author not be used in advertising or publicity
+# pertaining to distribution of the software without specific, written
+# prior permission.
+#
+# SECRET LABS AB AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD
+# TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANT-
+# ABILITY AND FITNESS.  IN NO EVENT SHALL SECRET LABS AB OR THE AUTHOR
+# BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+# --------------------------------------------------------------------
+
+"""
+An XML-RPC client interface for Python.
+
+The marshalling and response parser code can also be used to
+implement XML-RPC servers.
+
+Exported exceptions:
+
+  Error          Base class for client errors
+  ProtocolError  Indicates an HTTP protocol error
+  ResponseError  Indicates a broken response package
+  Fault          Indicates an XML-RPC fault package
+
+Exported classes:
+
+  ServerProxy    Represents a logical connection to an XML-RPC server
+
+  MultiCall      Executor of boxcared xmlrpc requests
+  DateTime       dateTime wrapper for an ISO 8601 string or time tuple or
+                 localtime integer value to generate a "dateTime.iso8601"
+                 XML-RPC value
+  Binary         binary data wrapper
+
+  Marshaller     Generate an XML-RPC params chunk from a Python data structure
+  Unmarshaller   Unmarshal an XML-RPC response from incoming XML event message
+  Transport      Handles an HTTP transaction to an XML-RPC server
+  SafeTransport  Handles an HTTPS transaction to an XML-RPC server
+
+Exported constants:
+
+  (none)
+
+Exported functions:
+
+  getparser      Create instance of the fastest available parser & attach
+                 to an unmarshalling object
+  dumps          Convert an argument tuple or a Fault instance to an XML-RPC
+                 request (or response, if the methodresponse option is used).
+  loads          Convert an XML-RPC packet to unmarshalled data plus a method
+                 name (None if not present).
+"""
+
+import base64
+import sys
+import time
+from datetime import datetime
+from decimal import Decimal
+import http.client
+import urllib.parse
+from xml.parsers import expat
+import errno
+from io import BytesIO
+try:
+    import gzip
+except ImportError:
+    gzip = None #python can be built without zlib/gzip support
+
+# --------------------------------------------------------------------
+# Internal stuff
+
+def escape(s):
+    s = s.replace("&", "&amp;")
+    s = s.replace("<", "&lt;")
+    return s.replace(">", "&gt;",)
+
+# used in User-Agent header sent
+__version__ = '%d.%d' % sys.version_info[:2]
+
+# xmlrpc integer limits
+MAXINT =  2**31-1
+MININT = -2**31
+
+# --------------------------------------------------------------------
+# Error constants (from Dan Libby's specification at
+# http://xmlrpc-epi.sourceforge.net/specs/rfc.fault_codes.php)
+
+# Ranges of errors
+PARSE_ERROR       = -32700
+SERVER_ERROR      = -32600
+APPLICATION_ERROR = -32500
+SYSTEM_ERROR      = -32400
+TRANSPORT_ERROR   = -32300
+
+# Specific errors
+NOT_WELLFORMED_ERROR  = -32700
+UNSUPPORTED_ENCODING  = -32701
+INVALID_ENCODING_CHAR = -32702
+INVALID_XMLRPC        = -32600
+METHOD_NOT_FOUND      = -32601
+INVALID_METHOD_PARAMS = -32602
+INTERNAL_ERROR        = -32603
+
+# --------------------------------------------------------------------
+# Exceptions
+
+##
+# Base class for all kinds of client-side errors.
+
+class Error(Exception):
+    """Base class for client errors."""
+    __str__ = object.__str__
+
+##
+# Indicates an HTTP-level protocol error.  This is raised by the HTTP
+# transport layer, if the server returns an error code other than 200
+# (OK).
+#
+# @param url The target URL.
+# @param errcode The HTTP error code.
+# @param errmsg The HTTP error message.
+# @param headers The HTTP header dictionary.
+
+class ProtocolError(Error):
+    """Indicates an HTTP protocol error."""
+    def __init__(self, url, errcode, errmsg, headers):
+        Error.__init__(self)
+        self.url = url
+        self.errcode = errcode
+        self.errmsg = errmsg
+        self.headers = headers
+    def __repr__(self):
+        return (
+            "<%s for %s: %s %s>" %
+            (self.__class__.__name__, self.url, self.errcode, self.errmsg)
+            )
+
+##
+# Indicates a broken XML-RPC response package.  This exception is
+# raised by the unmarshalling layer, if the XML-RPC response is
+# malformed.
+
+class ResponseError(Error):
+    """Indicates a broken response package."""
+    pass
+
+##
+# Indicates an XML-RPC fault response package.  This exception is
+# raised by the unmarshalling layer, if the XML-RPC response contains
+# a fault string.  This exception can also be used as a class, to
+# generate a fault XML-RPC message.
+#
+# @param faultCode The XML-RPC fault code.
+# @param faultString The XML-RPC fault string.
+
+class Fault(Error):
+    """Indicates an XML-RPC fault package."""
+    def __init__(self, faultCode, faultString, **extra):
+        Error.__init__(self)
+        self.faultCode = faultCode
+        self.faultString = faultString
+    def __repr__(self):
+        return "<%s %s: %r>" % (self.__class__.__name__,
+                                self.faultCode, self.faultString)
+
+# --------------------------------------------------------------------
+# Special values
+
+##
+# Backwards compatibility
+boolean = Boolean = bool
+
+
+def _iso8601_format(value):
+    if value.tzinfo is not None:
+        # XML-RPC only uses the naive portion of the datetime
+        value = value.replace(tzinfo=None)
+    # XML-RPC doesn't use '-' separator in the date part
+    return value.isoformat(timespec='seconds').replace('-', '')
+
+
+def _strftime(value):
+    if isinstance(value, datetime):
+        return _iso8601_format(value)
+
+    if not isinstance(value, (tuple, time.struct_time)):
+        if value == 0:
+            value = time.time()
+        value = time.localtime(value)
+
+    return "%04d%02d%02dT%02d:%02d:%02d" % value[:6]
+
+class DateTime:
+    """DateTime wrapper for an ISO 8601 string or time tuple or
+    localtime integer value to generate 'dateTime.iso8601' XML-RPC
+    value.
+    """
+
+    def __init__(self, value=0):
+        if isinstance(value, str):
+            self.value = value
+        else:
+            self.value = _strftime(value)
+
+    def make_comparable(self, other):
+        if isinstance(other, DateTime):
+            s = self.value
+            o = other.value
+        elif isinstance(other, datetime):
+            s = self.value
+            o = _iso8601_format(other)
+        elif isinstance(other, str):
+            s = self.value
+            o = other
+        elif hasattr(other, "timetuple"):
+            s = self.timetuple()
+            o = other.timetuple()
+        else:
+            s = self
+            o = NotImplemented
+        return s, o
+
+    def __lt__(self, other):
+        s, o = self.make_comparable(other)
+        if o is NotImplemented:
+            return NotImplemented
+        return s < o
+
+    def __le__(self, other):
+        s, o = self.make_comparable(other)
+        if o is NotImplemented:
+            return NotImplemented
+        return s <= o
+
+    def __gt__(self, other):
+        s, o = self.make_comparable(other)
+        if o is NotImplemented:
+            return NotImplemented
+        return s > o
+
+    def __ge__(self, other):
+        s, o = self.make_comparable(other)
+        if o is NotImplemented:
+            return NotImplemented
+        return s >= o
+
+    def __eq__(self, other):
+        s, o = self.make_comparable(other)
+        if o is NotImplemented:
+            return NotImplemented
+        return s == o
+
+    def timetuple(self):
+        return time.strptime(self.value, "%Y%m%dT%H:%M:%S")
+
+    ##
+    # Get date/time value.
+    #
+    # @return Date/time value, as an ISO 8601 string.
+
+    def __str__(self):
+        return self.value
+
+    def __repr__(self):
+        return "<%s %r at %#x>" % (self.__class__.__name__, self.value, id(self))
+
+    def decode(self, data):
+        self.value = str(data).strip()
+
+    def encode(self, out):
+        out.write("<value><dateTime.iso8601>")
+        out.write(self.value)
+        out.write("</dateTime.iso8601></value>\n")
+
+def _datetime(data):
+    # decode xml element contents into a DateTime structure.
+    value = DateTime()
+    value.decode(data)
+    return value
+
+def _datetime_type(data):
+    return datetime.strptime(data, "%Y%m%dT%H:%M:%S")
+
+##
+# Wrapper for binary data.  This can be used to transport any kind
+# of binary data over XML-RPC, using BASE64 encoding.
+#
+# @param data An 8-bit string containing arbitrary data.
+
+class Binary:
+    """Wrapper for binary data."""
+
+    def __init__(self, data=None):
+        if data is None:
+            data = b""
+        else:
+            if not isinstance(data, (bytes, bytearray)):
+                raise TypeError("expected bytes or bytearray, not %s" %
+                                data.__class__.__name__)
+            data = bytes(data)  # Make a copy of the bytes!
+        self.data = data
+
+    ##
+    # Get buffer contents.
+    #
+    # @return Buffer contents, as an 8-bit string.
+
+    def __str__(self):
+        return str(self.data, "latin-1")  # XXX encoding?!
+
+    def __eq__(self, other):
+        if isinstance(other, Binary):
+            other = other.data
+        return self.data == other
+
+    def decode(self, data):
+        self.data = base64.decodebytes(data)
+
+    def encode(self, out):
+        out.write("<value><base64>\n")
+        encoded = base64.encodebytes(self.data)
+        out.write(encoded.decode('ascii'))
+        out.write("</base64></value>\n")
+
+def _binary(data):
+    # decode xml element contents into a Binary structure
+    value = Binary()
+    value.decode(data)
+    return value
+
+WRAPPERS = (DateTime, Binary)
+
+# --------------------------------------------------------------------
+# XML parsers
+
+class ExpatParser:
+    # fast expat parser for Python 2.0 and later.
+    def __init__(self, target):
+        self._parser = parser = expat.ParserCreate(None, None)
+        self._target = target
+        parser.StartElementHandler = target.start
+        parser.EndElementHandler = target.end
+        parser.CharacterDataHandler = target.data
+        encoding = None
+        target.xml(encoding, None)
+
+    def feed(self, data):
+        self._parser.Parse(data, False)
+
+    def close(self):
+        try:
+            parser = self._parser
+        except AttributeError:
+            pass
+        else:
+            del self._target, self._parser # get rid of circular references
+            parser.Parse(b"", True) # end of data
+
+# --------------------------------------------------------------------
+# XML-RPC marshalling and unmarshalling code
+
+##
+# XML-RPC marshaller.
+#
+# @param encoding Default encoding for 8-bit strings.  The default
+#     value is None (interpreted as UTF-8).
+# @see dumps
+
+class Marshaller:
+    """Generate an XML-RPC params chunk from a Python data structure.
+
+    Create a Marshaller instance for each set of parameters, and use
+    the "dumps" method to convert your data (represented as a tuple)
+    to an XML-RPC params chunk.  To write a fault response, pass a
+    Fault instance instead.  You may prefer to use the "dumps" module
+    function for this purpose.
+    """
+
+    # by the way, if you don't understand what's going on in here,
+    # that's perfectly ok.
+
+    def __init__(self, encoding=None, allow_none=False):
+        self.memo = {}
+        self.data = None
+        self.encoding = encoding
+        self.allow_none = allow_none
+
+    dispatch = {}
+
+    def dumps(self, values):
+        out = []
+        write = out.append
+        dump = self.__dump
+        if isinstance(values, Fault):
+            # fault instance
+            write("<fault>\n")
+            dump({'faultCode': values.faultCode,
+                  'faultString': values.faultString},
+                 write)
+            write("</fault>\n")
+        else:
+            # parameter block
+            # FIXME: the xml-rpc specification allows us to leave out
+            # the entire <params> block if there are no parameters.
+            # however, changing this may break older code (including
+            # old versions of xmlrpclib.py), so this is better left as
+            # is for now.  See @XMLRPC3 for more information. /F
+            write("<params>\n")
+            for v in values:
+                write("<param>\n")
+                dump(v, write)
+                write("</param>\n")
+            write("</params>\n")
+        result = "".join(out)
+        return result
+
+    def __dump(self, value, write):
+        try:
+            f = self.dispatch[type(value)]
+        except KeyError:
+            # check if this object can be marshalled as a structure
+            if not hasattr(value, '__dict__'):
+                raise TypeError("cannot marshal %s objects" % type(value))
+            # check if this class is a sub-class of a basic type,
+            # because we don't know how to marshal these types
+            # (e.g. a string sub-class)
+            for type_ in type(value).__mro__:
+                if type_ in self.dispatch.keys():
+                    raise TypeError("cannot marshal %s objects" % type(value))
+            # XXX(twouters): using "_arbitrary_instance" as key as a quick-fix
+            # for the p3yk merge, this should probably be fixed more neatly.
+            f = self.dispatch["_arbitrary_instance"]
+        f(self, value, write)
+
+    def dump_nil (self, value, write):
+        if not self.allow_none:
+            raise TypeError("cannot marshal None unless allow_none is enabled")
+        write("<value><nil/></value>")
+    dispatch[type(None)] = dump_nil
+
+    def dump_bool(self, value, write):
+        write("<value><boolean>")
+        write(value and "1" or "0")
+        write("</boolean></value>\n")
+    dispatch[bool] = dump_bool
+
+    def dump_long(self, value, write):
+        if value > MAXINT or value < MININT:
+            raise OverflowError("int exceeds XML-RPC limits")
+        write("<value><int>")
+        write(str(int(value)))
+        write("</int></value>\n")
+    dispatch[int] = dump_long
+
+    # backward compatible
+    dump_int = dump_long
+
+    def dump_double(self, value, write):
+        write("<value><double>")
+        write(repr(value))
+        write("</double></value>\n")
+    dispatch[float] = dump_double
+
+    def dump_unicode(self, value, write, escape=escape):
+        write("<value><string>")
+        write(escape(value))
+        write("</string></value>\n")
+    dispatch[str] = dump_unicode
+
+    def dump_bytes(self, value, write):
+        write("<value><base64>\n")
+        encoded = base64.encodebytes(value)
+        write(encoded.decode('ascii'))
+        write("</base64></value>\n")
+    dispatch[bytes] = dump_bytes
+    dispatch[bytearray] = dump_bytes
+
+    def dump_array(self, value, write):
+        i = id(value)
+        if i in self.memo:
+            raise TypeError("cannot marshal recursive sequences")
+        self.memo[i] = None
+        dump = self.__dump
+        write("<value><array><data>\n")
+        for v in value:
+            dump(v, write)
+        write("</data></array></value>\n")
+        del self.memo[i]
+    dispatch[tuple] = dump_array
+    dispatch[list] = dump_array
+
+    def dump_struct(self, value, write, escape=escape):
+        i = id(value)
+        if i in self.memo:
+            raise TypeError("cannot marshal recursive dictionaries")
+        self.memo[i] = None
+        dump = self.__dump
+        write("<value><struct>\n")
+        for k, v in value.items():
+            write("<member>\n")
+            if not isinstance(k, str):
+                raise TypeError("dictionary key must be string")
+            write("<name>%s</name>\n" % escape(k))
+            dump(v, write)
+            write("</member>\n")
+        write("</struct></value>\n")
+        del self.memo[i]
+    dispatch[dict] = dump_struct
+
+    def dump_datetime(self, value, write):
+        write("<value><dateTime.iso8601>")
+        write(_strftime(value))
+        write("</dateTime.iso8601></value>\n")
+    dispatch[datetime] = dump_datetime
+
+    def dump_instance(self, value, write):
+        # check for special wrappers
+        if value.__class__ in WRAPPERS:
+            self.write = write
+            value.encode(self)
+            del self.write
+        else:
+            # store instance attributes as a struct (really?)
+            self.dump_struct(value.__dict__, write)
+    dispatch[DateTime] = dump_instance
+    dispatch[Binary] = dump_instance
+    # XXX(twouters): using "_arbitrary_instance" as key as a quick-fix
+    # for the p3yk merge, this should probably be fixed more neatly.
+    dispatch["_arbitrary_instance"] = dump_instance
+
+##
+# XML-RPC unmarshaller.
+#
+# @see loads
+
+class Unmarshaller:
+    """Unmarshal an XML-RPC response, based on incoming XML event
+    messages (start, data, end).  Call close() to get the resulting
+    data structure.
+
+    Note that this reader is fairly tolerant, and gladly accepts bogus
+    XML-RPC data without complaining (but not bogus XML).
+    """
+
+    # and again, if you don't understand what's going on in here,
+    # that's perfectly ok.
+
+    def __init__(self, use_datetime=False, use_builtin_types=False):
+        self._type = None
+        self._stack = []
+        self._marks = []
+        self._data = []
+        self._value = False
+        self._methodname = None
+        self._encoding = "utf-8"
+        self.append = self._stack.append
+        self._use_datetime = use_builtin_types or use_datetime
+        self._use_bytes = use_builtin_types
+
+    def close(self):
+        # return response tuple and target method
+        if self._type is None or self._marks:
+            raise ResponseError()
+        if self._type == "fault":
+            raise Fault(**self._stack[0])
+        return tuple(self._stack)
+
+    def getmethodname(self):
+        return self._methodname
+
+    #
+    # event handlers
+
+    def xml(self, encoding, standalone):
+        self._encoding = encoding
+        # FIXME: assert standalone == 1 ???
+
+    def start(self, tag, attrs):
+        # prepare to handle this element
+        if ':' in tag:
+            tag = tag.split(':')[-1]
+        if tag == "array" or tag == "struct":
+            self._marks.append(len(self._stack))
+        self._data = []
+        if self._value and tag not in self.dispatch:
+            raise ResponseError("unknown tag %r" % tag)
+        self._value = (tag == "value")
+
+    def data(self, text):
+        self._data.append(text)
+
+    def end(self, tag):
+        # call the appropriate end tag handler
+        try:
+            f = self.dispatch[tag]
+        except KeyError:
+            if ':' not in tag:
+                return # unknown tag ?
+            try:
+                f = self.dispatch[tag.split(':')[-1]]
+            except KeyError:
+                return # unknown tag ?
+        return f(self, "".join(self._data))
+
+    #
+    # accelerator support
+
+    def end_dispatch(self, tag, data):
+        # dispatch data
+        try:
+            f = self.dispatch[tag]
+        except KeyError:
+            if ':' not in tag:
+                return # unknown tag ?
+            try:
+                f = self.dispatch[tag.split(':')[-1]]
+            except KeyError:
+                return # unknown tag ?
+        return f(self, data)
+
+    #
+    # element decoders
+
+    dispatch = {}
+
+    def end_nil (self, data):
+        self.append(None)
+        self._value = 0
+    dispatch["nil"] = end_nil
+
+    def end_boolean(self, data):
+        if data == "0":
+            self.append(False)
+        elif data == "1":
+            self.append(True)
+        else:
+            raise TypeError("bad boolean value")
+        self._value = 0
+    dispatch["boolean"] = end_boolean
+
+    def end_int(self, data):
+        self.append(int(data))
+        self._value = 0
+    dispatch["i1"] = end_int
+    dispatch["i2"] = end_int
+    dispatch["i4"] = end_int
+    dispatch["i8"] = end_int
+    dispatch["int"] = end_int
+    dispatch["biginteger"] = end_int
+
+    def end_double(self, data):
+        self.append(float(data))
+        self._value = 0
+    dispatch["double"] = end_double
+    dispatch["float"] = end_double
+
+    def end_bigdecimal(self, data):
+        self.append(Decimal(data))
+        self._value = 0
+    dispatch["bigdecimal"] = end_bigdecimal
+
+    def end_string(self, data):
+        if self._encoding:
+            data = data.decode(self._encoding)
+        self.append(data)
+        self._value = 0
+    dispatch["string"] = end_string
+    dispatch["name"] = end_string # struct keys are always strings
+
+    def end_array(self, data):
+        mark = self._marks.pop()
+        # map arrays to Python lists
+        self._stack[mark:] = [self._stack[mark:]]
+        self._value = 0
+    dispatch["array"] = end_array
+
+    def end_struct(self, data):
+        mark = self._marks.pop()
+        # map structs to Python dictionaries
+        dict = {}
+        items = self._stack[mark:]
+        for i in range(0, len(items), 2):
+            dict[items[i]] = items[i+1]
+        self._stack[mark:] = [dict]
+        self._value = 0
+    dispatch["struct"] = end_struct
+
+    def end_base64(self, data):
+        value = Binary()
+        value.decode(data.encode("ascii"))
+        if self._use_bytes:
+            value = value.data
+        self.append(value)
+        self._value = 0
+    dispatch["base64"] = end_base64
+
+    def end_dateTime(self, data):
+        value = DateTime()
+        value.decode(data)
+        if self._use_datetime:
+            value = _datetime_type(data)
+        self.append(value)
+    dispatch["dateTime.iso8601"] = end_dateTime
+
+    def end_value(self, data):
+        # if we stumble upon a value element with no internal
+        # elements, treat it as a string element
+        if self._value:
+            self.end_string(data)
+    dispatch["value"] = end_value
+
+    def end_params(self, data):
+        self._type = "params"
+    dispatch["params"] = end_params
+
+    def end_fault(self, data):
+        self._type = "fault"
+    dispatch["fault"] = end_fault
+
+    def end_methodName(self, data):
+        if self._encoding:
+            data = data.decode(self._encoding)
+        self._methodname = data
+        self._type = "methodName" # no params
+    dispatch["methodName"] = end_methodName
+
+## Multicall support
+#
+
+class _MultiCallMethod:
+    # some lesser magic to store calls made to a MultiCall object
+    # for batch execution
+    def __init__(self, call_list, name):
+        self.__call_list = call_list
+        self.__name = name
+    def __getattr__(self, name):
+        return _MultiCallMethod(self.__call_list, "%s.%s" % (self.__name, name))
+    def __call__(self, *args):
+        self.__call_list.append((self.__name, args))
+
+class MultiCallIterator:
+    """Iterates over the results of a multicall. Exceptions are
+    raised in response to xmlrpc faults."""
+
+    def __init__(self, results):
+        self.results = results
+
+    def __getitem__(self, i):
+        item = self.results[i]
+        if isinstance(item, dict):
+            raise Fault(item['faultCode'], item['faultString'])
+        elif isinstance(item, list):
+            return item[0]
+        else:
+            raise ValueError("unexpected type in multicall result")
+
+class MultiCall:
+    """server -> an object used to boxcar method calls
+
+    server should be a ServerProxy object.
+
+    Methods can be added to the MultiCall using normal
+    method call syntax e.g.:
+
+    multicall = MultiCall(server_proxy)
+    multicall.add(2,3)
+    multicall.get_address("Guido")
+
+    To execute the multicall, call the MultiCall object e.g.:
+
+    add_result, address = multicall()
+    """
+
+    def __init__(self, server):
+        self.__server = server
+        self.__call_list = []
+
+    def __repr__(self):
+        return "<%s at %#x>" % (self.__class__.__name__, id(self))
+
+    def __getattr__(self, name):
+        return _MultiCallMethod(self.__call_list, name)
+
+    def __call__(self):
+        marshalled_list = []
+        for name, args in self.__call_list:
+            marshalled_list.append({'methodName' : name, 'params' : args})
+
+        return MultiCallIterator(self.__server.system.multicall(marshalled_list))
+
+# --------------------------------------------------------------------
+# convenience functions
+
+FastMarshaller = FastParser = FastUnmarshaller = None
+
+##
+# Create a parser object, and connect it to an unmarshalling instance.
+# This function picks the fastest available XML parser.
+#
+# return A (parser, unmarshaller) tuple.
+
+def getparser(use_datetime=False, use_builtin_types=False):
+    """getparser() -> parser, unmarshaller
+
+    Create an instance of the fastest available parser, and attach it
+    to an unmarshalling object.  Return both objects.
+    """
+    if FastParser and FastUnmarshaller:
+        if use_builtin_types:
+            mkdatetime = _datetime_type
+            mkbytes = base64.decodebytes
+        elif use_datetime:
+            mkdatetime = _datetime_type
+            mkbytes = _binary
+        else:
+            mkdatetime = _datetime
+            mkbytes = _binary
+        target = FastUnmarshaller(True, False, mkbytes, mkdatetime, Fault)
+        parser = FastParser(target)
+    else:
+        target = Unmarshaller(use_datetime=use_datetime, use_builtin_types=use_builtin_types)
+        if FastParser:
+            parser = FastParser(target)
+        else:
+            parser = ExpatParser(target)
+    return parser, target
+
+##
+# Convert a Python tuple or a Fault instance to an XML-RPC packet.
+#
+# @def dumps(params, **options)
+# @param params A tuple or Fault instance.
+# @keyparam methodname If given, create a methodCall request for
+#     this method name.
+# @keyparam methodresponse If given, create a methodResponse packet.
+#     If used with a tuple, the tuple must be a singleton (that is,
+#     it must contain exactly one element).
+# @keyparam encoding The packet encoding.
+# @return A string containing marshalled data.
+
+def dumps(params, methodname=None, methodresponse=None, encoding=None,
+          allow_none=False):
+    """data [,options] -> marshalled data
+
+    Convert an argument tuple or a Fault instance to an XML-RPC
+    request (or response, if the methodresponse option is used).
+
+    In addition to the data object, the following options can be given
+    as keyword arguments:
+
+        methodname: the method name for a methodCall packet
+
+        methodresponse: true to create a methodResponse packet.
+        If this option is used with a tuple, the tuple must be
+        a singleton (i.e. it can contain only one element).
+
+        encoding: the packet encoding (default is UTF-8)
+
+    All byte strings in the data structure are assumed to use the
+    packet encoding.  Unicode strings are automatically converted,
+    where necessary.
+    """
+
+    assert isinstance(params, (tuple, Fault)), "argument must be tuple or Fault instance"
+    if isinstance(params, Fault):
+        methodresponse = 1
+    elif methodresponse and isinstance(params, tuple):
+        assert len(params) == 1, "response tuple must be a singleton"
+
+    if not encoding:
+        encoding = "utf-8"
+
+    if FastMarshaller:
+        m = FastMarshaller(encoding)
+    else:
+        m = Marshaller(encoding, allow_none)
+
+    data = m.dumps(params)
+
+    if encoding != "utf-8":
+        xmlheader = "<?xml version='1.0' encoding='%s'?>\n" % str(encoding)
+    else:
+        xmlheader = "<?xml version='1.0'?>\n" # utf-8 is default
+
+    # standard XML-RPC wrappings
+    if methodname:
+        # a method call
+        data = (
+            xmlheader,
+            "<methodCall>\n"
+            "<methodName>", methodname, "</methodName>\n",
+            data,
+            "</methodCall>\n"
+            )
+    elif methodresponse:
+        # a method response, or a fault structure
+        data = (
+            xmlheader,
+            "<methodResponse>\n",
+            data,
+            "</methodResponse>\n"
+            )
+    else:
+        return data # return as is
+    return "".join(data)
+
+##
+# Convert an XML-RPC packet to a Python object.  If the XML-RPC packet
+# represents a fault condition, this function raises a Fault exception.
+#
+# @param data An XML-RPC packet, given as an 8-bit string.
+# @return A tuple containing the unpacked data, and the method name
+#     (None if not present).
+# @see Fault
+
+def loads(data, use_datetime=False, use_builtin_types=False):
+    """data -> unmarshalled data, method name
+
+    Convert an XML-RPC packet to unmarshalled data plus a method
+    name (None if not present).
+
+    If the XML-RPC packet represents a fault condition, this function
+    raises a Fault exception.
+    """
+    p, u = getparser(use_datetime=use_datetime, use_builtin_types=use_builtin_types)
+    p.feed(data)
+    p.close()
+    return u.close(), u.getmethodname()
+
+##
+# Encode a string using the gzip content encoding such as specified by the
+# Content-Encoding: gzip
+# in the HTTP header, as described in RFC 1952
+#
+# @param data the unencoded data
+# @return the encoded data
+
+def gzip_encode(data):
+    """data -> gzip encoded data
+
+    Encode data using the gzip content encoding as described in RFC 1952
+    """
+    if not gzip:
+        raise NotImplementedError
+    f = BytesIO()
+    with gzip.GzipFile(mode="wb", fileobj=f, compresslevel=1) as gzf:
+        gzf.write(data)
+    return f.getvalue()
+
+##
+# Decode a string using the gzip content encoding such as specified by the
+# Content-Encoding: gzip
+# in the HTTP header, as described in RFC 1952
+#
+# @param data The encoded data
+# @keyparam max_decode Maximum bytes to decode (20 MiB default), use negative
+#    values for unlimited decoding
+# @return the unencoded data
+# @raises ValueError if data is not correctly coded.
+# @raises ValueError if max gzipped payload length exceeded
+
+def gzip_decode(data, max_decode=20971520):
+    """gzip encoded data -> unencoded data
+
+    Decode data using the gzip content encoding as described in RFC 1952
+    """
+    if not gzip:
+        raise NotImplementedError
+    with gzip.GzipFile(mode="rb", fileobj=BytesIO(data)) as gzf:
+        try:
+            if max_decode < 0: # no limit
+                decoded = gzf.read()
+            else:
+                decoded = gzf.read(max_decode + 1)
+        except OSError:
+            raise ValueError("invalid data")
+    if max_decode >= 0 and len(decoded) > max_decode:
+        raise ValueError("max gzipped payload length exceeded")
+    return decoded
+
+##
+# Return a decoded file-like object for the gzip encoding
+# as described in RFC 1952.
+#
+# @param response A stream supporting a read() method
+# @return a file-like object that the decoded data can be read() from
+
+class GzipDecodedResponse(gzip.GzipFile if gzip else object):
+    """a file-like object to decode a response encoded with the gzip
+    method, as described in RFC 1952.
+    """
+    def __init__(self, response):
+        #response doesn't support tell() and read(), required by
+        #GzipFile
+        if not gzip:
+            raise NotImplementedError
+        self.io = BytesIO(response.read())
+        gzip.GzipFile.__init__(self, mode="rb", fileobj=self.io)
+
+    def close(self):
+        try:
+            gzip.GzipFile.close(self)
+        finally:
+            self.io.close()
+
+
+# --------------------------------------------------------------------
+# request dispatcher
+
+class _Method:
+    # some magic to bind an XML-RPC method to an RPC server.
+    # supports "nested" methods (e.g. examples.getStateName)
+    def __init__(self, send, name):
+        self.__send = send
+        self.__name = name
+    def __getattr__(self, name):
+        return _Method(self.__send, "%s.%s" % (self.__name, name))
+    def __call__(self, *args):
+        return self.__send(self.__name, args)
+
+##
+# Standard transport class for XML-RPC over HTTP.
+# <p>
+# You can create custom transports by subclassing this method, and
+# overriding selected methods.
+
+class Transport:
+    """Handles an HTTP transaction to an XML-RPC server."""
+
+    # client identifier (may be overridden)
+    user_agent = "Python-xmlrpc/%s" % __version__
+
+    #if true, we'll request gzip encoding
+    accept_gzip_encoding = True
+
+    # if positive, encode request using gzip if it exceeds this threshold
+    # note that many servers will get confused, so only use it if you know
+    # that they can decode such a request
+    encode_threshold = None #None = don't encode
+
+    def __init__(self, use_datetime=False, use_builtin_types=False,
+                 *, headers=()):
+        self._use_datetime = use_datetime
+        self._use_builtin_types = use_builtin_types
+        self._connection = (None, None)
+        self._headers = list(headers)
+        self._extra_headers = []
+
+    ##
+    # Send a complete request, and parse the response.
+    # Retry request if a cached connection has disconnected.
+    #
+    # @param host Target host.
+    # @param handler Target PRC handler.
+    # @param request_body XML-RPC request body.
+    # @param verbose Debugging flag.
+    # @return Parsed response.
+
+    def request(self, host, handler, request_body, verbose=False):
+        #retry request once if cached connection has gone cold
+        for i in (0, 1):
+            try:
+                return self.single_request(host, handler, request_body, verbose)
+            except http.client.RemoteDisconnected:
+                if i:
+                    raise
+            except OSError as e:
+                if i or e.errno not in (errno.ECONNRESET, errno.ECONNABORTED,
+                                        errno.EPIPE):
+                    raise
+
+    def single_request(self, host, handler, request_body, verbose=False):
+        # issue XML-RPC request
+        try:
+            http_conn = self.send_request(host, handler, request_body, verbose)
+            resp = http_conn.getresponse()
+            if resp.status == 200:
+                self.verbose = verbose
+                return self.parse_response(resp)
+
+        except Fault:
+            raise
+        except Exception:
+            #All unexpected errors leave connection in
+            # a strange state, so we clear it.
+            self.close()
+            raise
+
+        #We got an error response.
+        #Discard any response data and raise exception
+        if resp.getheader("content-length", ""):
+            resp.read()
+        raise ProtocolError(
+            host + handler,
+            resp.status, resp.reason,
+            dict(resp.getheaders())
+            )
+
+
+    ##
+    # Create parser.
+    #
+    # @return A 2-tuple containing a parser and an unmarshaller.
+
+    def getparser(self):
+        # get parser and unmarshaller
+        return getparser(use_datetime=self._use_datetime,
+                         use_builtin_types=self._use_builtin_types)
+
+    ##
+    # Get authorization info from host parameter
+    # Host may be a string, or a (host, x509-dict) tuple; if a string,
+    # it is checked for a "user:pw@host" format, and a "Basic
+    # Authentication" header is added if appropriate.
+    #
+    # @param host Host descriptor (URL or (URL, x509 info) tuple).
+    # @return A 3-tuple containing (actual host, extra headers,
+    #     x509 info).  The header and x509 fields may be None.
+
+    def get_host_info(self, host):
+
+        x509 = {}
+        if isinstance(host, tuple):
+            host, x509 = host
+
+        auth, host = urllib.parse._splituser(host)
+
+        if auth:
+            auth = urllib.parse.unquote_to_bytes(auth)
+            auth = base64.encodebytes(auth).decode("utf-8")
+            auth = "".join(auth.split()) # get rid of whitespace
+            extra_headers = [
+                ("Authorization", "Basic " + auth)
+                ]
+        else:
+            extra_headers = []
+
+        return host, extra_headers, x509
+
+    ##
+    # Connect to server.
+    #
+    # @param host Target host.
+    # @return An HTTPConnection object
+
+    def make_connection(self, host):
+        #return an existing connection if possible.  This allows
+        #HTTP/1.1 keep-alive.
+        if self._connection and host == self._connection[0]:
+            return self._connection[1]
+        # create a HTTP connection object from a host descriptor
+        chost, self._extra_headers, x509 = self.get_host_info(host)
+        self._connection = host, http.client.HTTPConnection(chost)
+        return self._connection[1]
+
+    ##
+    # Clear any cached connection object.
+    # Used in the event of socket errors.
+    #
+    def close(self):
+        host, connection = self._connection
+        if connection:
+            self._connection = (None, None)
+            connection.close()
+
+    ##
+    # Send HTTP request.
+    #
+    # @param host Host descriptor (URL or (URL, x509 info) tuple).
+    # @param handler Target RPC handler (a path relative to host)
+    # @param request_body The XML-RPC request body
+    # @param debug Enable debugging if debug is true.
+    # @return An HTTPConnection.
+
+    def send_request(self, host, handler, request_body, debug):
+        connection = self.make_connection(host)
+        headers = self._headers + self._extra_headers
+        if debug:
+            connection.set_debuglevel(1)
+        if self.accept_gzip_encoding and gzip:
+            connection.putrequest("POST", handler, skip_accept_encoding=True)
+            headers.append(("Accept-Encoding", "gzip"))
+        else:
+            connection.putrequest("POST", handler)
+        headers.append(("Content-Type", "text/xml"))
+        headers.append(("User-Agent", self.user_agent))
+        self.send_headers(connection, headers)
+        self.send_content(connection, request_body)
+        return connection
+
+    ##
+    # Send request headers.
+    # This function provides a useful hook for subclassing
+    #
+    # @param connection httpConnection.
+    # @param headers list of key,value pairs for HTTP headers
+
+    def send_headers(self, connection, headers):
+        for key, val in headers:
+            connection.putheader(key, val)
+
+    ##
+    # Send request body.
+    # This function provides a useful hook for subclassing
+    #
+    # @param connection httpConnection.
+    # @param request_body XML-RPC request body.
+
+    def send_content(self, connection, request_body):
+        #optionally encode the request
+        if (self.encode_threshold is not None and
+            self.encode_threshold < len(request_body) and
+            gzip):
+            connection.putheader("Content-Encoding", "gzip")
+            request_body = gzip_encode(request_body)
+
+        connection.putheader("Content-Length", str(len(request_body)))
+        connection.endheaders(request_body)
+
+    ##
+    # Parse response.
+    #
+    # @param file Stream.
+    # @return Response tuple and target method.
+
+    def parse_response(self, response):
+        # read response data from httpresponse, and parse it
+        # Check for new http response object, otherwise it is a file object.
+        if hasattr(response, 'getheader'):
+            if response.getheader("Content-Encoding", "") == "gzip":
+                stream = GzipDecodedResponse(response)
+            else:
+                stream = response
+        else:
+            stream = response
+
+        p, u = self.getparser()
+
+        while data := stream.read(1024):
+            if self.verbose:
+                print("body:", repr(data))
+            p.feed(data)
+
+        if stream is not response:
+            stream.close()
+        p.close()
+
+        return u.close()
+
+##
+# Standard transport class for XML-RPC over HTTPS.
+
+class SafeTransport(Transport):
+    """Handles an HTTPS transaction to an XML-RPC server."""
+
+    def __init__(self, use_datetime=False, use_builtin_types=False,
+                 *, headers=(), context=None):
+        super().__init__(use_datetime=use_datetime,
+                         use_builtin_types=use_builtin_types,
+                         headers=headers)
+        self.context = context
+
+    # FIXME: mostly untested
+
+    def make_connection(self, host):
+        if self._connection and host == self._connection[0]:
+            return self._connection[1]
+
+        if not hasattr(http.client, "HTTPSConnection"):
+            raise NotImplementedError(
+            "your version of http.client doesn't support HTTPS")
+        # create a HTTPS connection object from a host descriptor
+        # host may be a string, or a (host, x509-dict) tuple
+        chost, self._extra_headers, x509 = self.get_host_info(host)
+        self._connection = host, http.client.HTTPSConnection(chost,
+            None, context=self.context, **(x509 or {}))
+        return self._connection[1]
+
+##
+# Standard server proxy.  This class establishes a virtual connection
+# to an XML-RPC server.
+# <p>
+# This class is available as ServerProxy and Server.  New code should
+# use ServerProxy, to avoid confusion.
+#
+# @def ServerProxy(uri, **options)
+# @param uri The connection point on the server.
+# @keyparam transport A transport factory, compatible with the
+#    standard transport class.
+# @keyparam encoding The default encoding used for 8-bit strings
+#    (default is UTF-8).
+# @keyparam verbose Use a true value to enable debugging output.
+#    (printed to standard output).
+# @see Transport
+
+class ServerProxy:
+    """uri [,options] -> a logical connection to an XML-RPC server
+
+    uri is the connection point on the server, given as
+    scheme://host/target.
+
+    The standard implementation always supports the "http" scheme.  If
+    SSL socket support is available (Python 2.0), it also supports
+    "https".
+
+    If the target part and the slash preceding it are both omitted,
+    "/RPC2" is assumed.
+
+    The following options can be given as keyword arguments:
+
+        transport: a transport factory
+        encoding: the request encoding (default is UTF-8)
+
+    All 8-bit strings passed to the server proxy are assumed to use
+    the given encoding.
+    """
+
+    def __init__(self, uri, transport=None, encoding=None, verbose=False,
+                 allow_none=False, use_datetime=False, use_builtin_types=False,
+                 *, headers=(), context=None):
+        # establish a "logical" server connection
+
+        # get the url
+        p = urllib.parse.urlsplit(uri)
+        if p.scheme not in ("http", "https"):
+            raise OSError("unsupported XML-RPC protocol")
+        self.__host = p.netloc
+        self.__handler = urllib.parse.urlunsplit(["", "", *p[2:]])
+        if not self.__handler:
+            self.__handler = "/RPC2"
+
+        if transport is None:
+            if p.scheme == "https":
+                handler = SafeTransport
+                extra_kwargs = {"context": context}
+            else:
+                handler = Transport
+                extra_kwargs = {}
+            transport = handler(use_datetime=use_datetime,
+                                use_builtin_types=use_builtin_types,
+                                headers=headers,
+                                **extra_kwargs)
+        self.__transport = transport
+
+        self.__encoding = encoding or 'utf-8'
+        self.__verbose = verbose
+        self.__allow_none = allow_none
+
+    def __close(self):
+        self.__transport.close()
+
+    def __request(self, methodname, params):
+        # call a method on the remote server
+
+        request = dumps(params, methodname, encoding=self.__encoding,
+                        allow_none=self.__allow_none).encode(self.__encoding, 'xmlcharrefreplace')
+
+        response = self.__transport.request(
+            self.__host,
+            self.__handler,
+            request,
+            verbose=self.__verbose
+            )
+
+        if len(response) == 1:
+            response = response[0]
+
+        return response
+
+    def __repr__(self):
+        return (
+            "<%s for %s%s>" %
+            (self.__class__.__name__, self.__host, self.__handler)
+            )
+
+    def __getattr__(self, name):
+        # magic method dispatcher
+        return _Method(self.__request, name)
+
+    # note: to call a remote object with a non-standard name, use
+    # result getattr(server, "strange-python-name")(args)
+
+    def __call__(self, attr):
+        """A workaround to get special attributes on the ServerProxy
+           without interfering with the magic __getattr__
+        """
+        if attr == "close":
+            return self.__close
+        elif attr == "transport":
+            return self.__transport
+        raise AttributeError("Attribute %r not found" % (attr,))
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, *args):
+        self.__close()
+
+# compatibility
+
+Server = ServerProxy
+
+# --------------------------------------------------------------------
+# test code
+
+if __name__ == "__main__":
+
+    # simple test program (from the XML-RPC specification)
+
+    # local server, available from Lib/xmlrpc/server.py
+    server = ServerProxy("http://localhost:8000")
+
+    try:
+        print(server.currentTime.getCurrentTime())
+    except Error as v:
+        print("ERROR", v)
+
+    multi = MultiCall(server)
+    multi.getData()
+    multi.pow(2,9)
+    multi.add(1,2)
+    try:
+        for response in multi():
+            print(response)
+    except Error as v:
+        print("ERROR", v)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/server.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/server.py
new file mode 100644
index 0000000000000000000000000000000000000000..3e6871157d092994a49dba801f392e53cc7b64cd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/xmlrpc/server.py
@@ -0,0 +1,1003 @@
+r"""XML-RPC Servers.
+
+This module can be used to create simple XML-RPC servers
+by creating a server and either installing functions, a
+class instance, or by extending the SimpleXMLRPCServer
+class.
+
+It can also be used to handle XML-RPC requests in a CGI
+environment using CGIXMLRPCRequestHandler.
+
+The Doc* classes can be used to create XML-RPC servers that
+serve pydoc-style documentation in response to HTTP
+GET requests. This documentation is dynamically generated
+based on the functions and methods registered with the
+server.
+
+A list of possible usage patterns follows:
+
+1. Install functions:
+
+server = SimpleXMLRPCServer(("localhost", 8000))
+server.register_function(pow)
+server.register_function(lambda x,y: x+y, 'add')
+server.serve_forever()
+
+2. Install an instance:
+
+class MyFuncs:
+    def __init__(self):
+        # make all of the sys functions available through sys.func_name
+        import sys
+        self.sys = sys
+    def _listMethods(self):
+        # implement this method so that system.listMethods
+        # knows to advertise the sys methods
+        return list_public_methods(self) + \
+                ['sys.' + method for method in list_public_methods(self.sys)]
+    def pow(self, x, y): return pow(x, y)
+    def add(self, x, y) : return x + y
+
+server = SimpleXMLRPCServer(("localhost", 8000))
+server.register_introspection_functions()
+server.register_instance(MyFuncs())
+server.serve_forever()
+
+3. Install an instance with custom dispatch method:
+
+class Math:
+    def _listMethods(self):
+        # this method must be present for system.listMethods
+        # to work
+        return ['add', 'pow']
+    def _methodHelp(self, method):
+        # this method must be present for system.methodHelp
+        # to work
+        if method == 'add':
+            return "add(2,3) => 5"
+        elif method == 'pow':
+            return "pow(x, y[, z]) => number"
+        else:
+            # By convention, return empty
+            # string if no help is available
+            return ""
+    def _dispatch(self, method, params):
+        if method == 'pow':
+            return pow(*params)
+        elif method == 'add':
+            return params[0] + params[1]
+        else:
+            raise ValueError('bad method')
+
+server = SimpleXMLRPCServer(("localhost", 8000))
+server.register_introspection_functions()
+server.register_instance(Math())
+server.serve_forever()
+
+4. Subclass SimpleXMLRPCServer:
+
+class MathServer(SimpleXMLRPCServer):
+    def _dispatch(self, method, params):
+        try:
+            # We are forcing the 'export_' prefix on methods that are
+            # callable through XML-RPC to prevent potential security
+            # problems
+            func = getattr(self, 'export_' + method)
+        except AttributeError:
+            raise Exception('method "%s" is not supported' % method)
+        else:
+            return func(*params)
+
+    def export_add(self, x, y):
+        return x + y
+
+server = MathServer(("localhost", 8000))
+server.serve_forever()
+
+5. CGI script:
+
+server = CGIXMLRPCRequestHandler()
+server.register_function(pow)
+server.handle_request()
+"""
+
+# Written by Brian Quinlan (brian@sweetapp.com).
+# Based on code written by Fredrik Lundh.
+
+from xmlrpc.client import Fault, dumps, loads, gzip_encode, gzip_decode
+from http.server import BaseHTTPRequestHandler
+from functools import partial
+from inspect import signature
+import html
+import http.server
+import socketserver
+import sys
+import os
+import re
+import pydoc
+import traceback
+try:
+    import fcntl
+except ImportError:
+    fcntl = None
+
+def resolve_dotted_attribute(obj, attr, allow_dotted_names=True):
+    """resolve_dotted_attribute(a, 'b.c.d') => a.b.c.d
+
+    Resolves a dotted attribute name to an object.  Raises
+    an AttributeError if any attribute in the chain starts with a '_'.
+
+    If the optional allow_dotted_names argument is false, dots are not
+    supported and this function operates similar to getattr(obj, attr).
+    """
+
+    if allow_dotted_names:
+        attrs = attr.split('.')
+    else:
+        attrs = [attr]
+
+    for i in attrs:
+        if i.startswith('_'):
+            raise AttributeError(
+                'attempt to access private attribute "%s"' % i
+                )
+        else:
+            obj = getattr(obj,i)
+    return obj
+
+def list_public_methods(obj):
+    """Returns a list of attribute strings, found in the specified
+    object, which represent callable attributes"""
+
+    return [member for member in dir(obj)
+                if not member.startswith('_') and
+                    callable(getattr(obj, member))]
+
+class SimpleXMLRPCDispatcher:
+    """Mix-in class that dispatches XML-RPC requests.
+
+    This class is used to register XML-RPC method handlers
+    and then to dispatch them. This class doesn't need to be
+    instanced directly when used by SimpleXMLRPCServer but it
+    can be instanced when used by the MultiPathXMLRPCServer
+    """
+
+    def __init__(self, allow_none=False, encoding=None,
+                 use_builtin_types=False):
+        self.funcs = {}
+        self.instance = None
+        self.allow_none = allow_none
+        self.encoding = encoding or 'utf-8'
+        self.use_builtin_types = use_builtin_types
+
+    def register_instance(self, instance, allow_dotted_names=False):
+        """Registers an instance to respond to XML-RPC requests.
+
+        Only one instance can be installed at a time.
+
+        If the registered instance has a _dispatch method then that
+        method will be called with the name of the XML-RPC method and
+        its parameters as a tuple
+        e.g. instance._dispatch('add',(2,3))
+
+        If the registered instance does not have a _dispatch method
+        then the instance will be searched to find a matching method
+        and, if found, will be called. Methods beginning with an '_'
+        are considered private and will not be called by
+        SimpleXMLRPCServer.
+
+        If a registered function matches an XML-RPC request, then it
+        will be called instead of the registered instance.
+
+        If the optional allow_dotted_names argument is true and the
+        instance does not have a _dispatch method, method names
+        containing dots are supported and resolved, as long as none of
+        the name segments start with an '_'.
+
+            *** SECURITY WARNING: ***
+
+            Enabling the allow_dotted_names options allows intruders
+            to access your module's global variables and may allow
+            intruders to execute arbitrary code on your machine.  Only
+            use this option on a secure, closed network.
+
+        """
+
+        self.instance = instance
+        self.allow_dotted_names = allow_dotted_names
+
+    def register_function(self, function=None, name=None):
+        """Registers a function to respond to XML-RPC requests.
+
+        The optional name argument can be used to set a Unicode name
+        for the function.
+        """
+        # decorator factory
+        if function is None:
+            return partial(self.register_function, name=name)
+
+        if name is None:
+            name = function.__name__
+        self.funcs[name] = function
+
+        return function
+
+    def register_introspection_functions(self):
+        """Registers the XML-RPC introspection methods in the system
+        namespace.
+
+        see http://xmlrpc.usefulinc.com/doc/reserved.html
+        """
+
+        self.funcs.update({'system.listMethods' : self.system_listMethods,
+                      'system.methodSignature' : self.system_methodSignature,
+                      'system.methodHelp' : self.system_methodHelp})
+
+    def register_multicall_functions(self):
+        """Registers the XML-RPC multicall method in the system
+        namespace.
+
+        see http://www.xmlrpc.com/discuss/msgReader$1208"""
+
+        self.funcs['system.multicall'] = self.system_multicall
+
+    def _marshaled_dispatch(self, data, dispatch_method = None, path = None):
+        """Dispatches an XML-RPC method from marshalled (XML) data.
+
+        XML-RPC methods are dispatched from the marshalled (XML) data
+        using the _dispatch method and the result is returned as
+        marshalled data. For backwards compatibility, a dispatch
+        function can be provided as an argument (see comment in
+        SimpleXMLRPCRequestHandler.do_POST) but overriding the
+        existing method through subclassing is the preferred means
+        of changing method dispatch behavior.
+        """
+
+        try:
+            params, method = loads(data, use_builtin_types=self.use_builtin_types)
+
+            # generate response
+            if dispatch_method is not None:
+                response = dispatch_method(method, params)
+            else:
+                response = self._dispatch(method, params)
+            # wrap response in a singleton tuple
+            response = (response,)
+            response = dumps(response, methodresponse=1,
+                             allow_none=self.allow_none, encoding=self.encoding)
+        except Fault as fault:
+            response = dumps(fault, allow_none=self.allow_none,
+                             encoding=self.encoding)
+        except BaseException as exc:
+            response = dumps(
+                Fault(1, "%s:%s" % (type(exc), exc)),
+                encoding=self.encoding, allow_none=self.allow_none,
+                )
+
+        return response.encode(self.encoding, 'xmlcharrefreplace')
+
+    def system_listMethods(self):
+        """system.listMethods() => ['add', 'subtract', 'multiple']
+
+        Returns a list of the methods supported by the server."""
+
+        methods = set(self.funcs.keys())
+        if self.instance is not None:
+            # Instance can implement _listMethod to return a list of
+            # methods
+            if hasattr(self.instance, '_listMethods'):
+                methods |= set(self.instance._listMethods())
+            # if the instance has a _dispatch method then we
+            # don't have enough information to provide a list
+            # of methods
+            elif not hasattr(self.instance, '_dispatch'):
+                methods |= set(list_public_methods(self.instance))
+        return sorted(methods)
+
+    def system_methodSignature(self, method_name):
+        """system.methodSignature('add') => [double, int, int]
+
+        Returns a list describing the signature of the method. In the
+        above example, the add method takes two integers as arguments
+        and returns a double result.
+
+        This server does NOT support system.methodSignature."""
+
+        # See http://xmlrpc.usefulinc.com/doc/sysmethodsig.html
+
+        return 'signatures not supported'
+
+    def system_methodHelp(self, method_name):
+        """system.methodHelp('add') => "Adds two integers together"
+
+        Returns a string containing documentation for the specified method."""
+
+        method = None
+        if method_name in self.funcs:
+            method = self.funcs[method_name]
+        elif self.instance is not None:
+            # Instance can implement _methodHelp to return help for a method
+            if hasattr(self.instance, '_methodHelp'):
+                return self.instance._methodHelp(method_name)
+            # if the instance has a _dispatch method then we
+            # don't have enough information to provide help
+            elif not hasattr(self.instance, '_dispatch'):
+                try:
+                    method = resolve_dotted_attribute(
+                                self.instance,
+                                method_name,
+                                self.allow_dotted_names
+                                )
+                except AttributeError:
+                    pass
+
+        # Note that we aren't checking that the method actually
+        # be a callable object of some kind
+        if method is None:
+            return ""
+        else:
+            return pydoc.getdoc(method)
+
+    def system_multicall(self, call_list):
+        """system.multicall([{'methodName': 'add', 'params': [2, 2]}, ...]) => \
+[[4], ...]
+
+        Allows the caller to package multiple XML-RPC calls into a single
+        request.
+
+        See http://www.xmlrpc.com/discuss/msgReader$1208
+        """
+
+        results = []
+        for call in call_list:
+            method_name = call['methodName']
+            params = call['params']
+
+            try:
+                # XXX A marshalling error in any response will fail the entire
+                # multicall. If someone cares they should fix this.
+                results.append([self._dispatch(method_name, params)])
+            except Fault as fault:
+                results.append(
+                    {'faultCode' : fault.faultCode,
+                     'faultString' : fault.faultString}
+                    )
+            except BaseException as exc:
+                results.append(
+                    {'faultCode' : 1,
+                     'faultString' : "%s:%s" % (type(exc), exc)}
+                    )
+        return results
+
+    def _dispatch(self, method, params):
+        """Dispatches the XML-RPC method.
+
+        XML-RPC calls are forwarded to a registered function that
+        matches the called XML-RPC method name. If no such function
+        exists then the call is forwarded to the registered instance,
+        if available.
+
+        If the registered instance has a _dispatch method then that
+        method will be called with the name of the XML-RPC method and
+        its parameters as a tuple
+        e.g. instance._dispatch('add',(2,3))
+
+        If the registered instance does not have a _dispatch method
+        then the instance will be searched to find a matching method
+        and, if found, will be called.
+
+        Methods beginning with an '_' are considered private and will
+        not be called.
+        """
+
+        try:
+            # call the matching registered function
+            func = self.funcs[method]
+        except KeyError:
+            pass
+        else:
+            if func is not None:
+                return func(*params)
+            raise Exception('method "%s" is not supported' % method)
+
+        if self.instance is not None:
+            if hasattr(self.instance, '_dispatch'):
+                # call the `_dispatch` method on the instance
+                return self.instance._dispatch(method, params)
+
+            # call the instance's method directly
+            try:
+                func = resolve_dotted_attribute(
+                    self.instance,
+                    method,
+                    self.allow_dotted_names
+                )
+            except AttributeError:
+                pass
+            else:
+                if func is not None:
+                    return func(*params)
+
+        raise Exception('method "%s" is not supported' % method)
+
+class SimpleXMLRPCRequestHandler(BaseHTTPRequestHandler):
+    """Simple XML-RPC request handler class.
+
+    Handles all HTTP POST requests and attempts to decode them as
+    XML-RPC requests.
+    """
+
+    # Class attribute listing the accessible path components;
+    # paths not on this list will result in a 404 error.
+    rpc_paths = ('/', '/RPC2', '/pydoc.css')
+
+    #if not None, encode responses larger than this, if possible
+    encode_threshold = 1400 #a common MTU
+
+    #Override form StreamRequestHandler: full buffering of output
+    #and no Nagle.
+    wbufsize = -1
+    disable_nagle_algorithm = True
+
+    # a re to match a gzip Accept-Encoding
+    aepattern = re.compile(r"""
+                            \s* ([^\s;]+) \s*            #content-coding
+                            (;\s* q \s*=\s* ([0-9\.]+))? #q
+                            """, re.VERBOSE | re.IGNORECASE)
+
+    def accept_encodings(self):
+        r = {}
+        ae = self.headers.get("Accept-Encoding", "")
+        for e in ae.split(","):
+            match = self.aepattern.match(e)
+            if match:
+                v = match.group(3)
+                v = float(v) if v else 1.0
+                r[match.group(1)] = v
+        return r
+
+    def is_rpc_path_valid(self):
+        if self.rpc_paths:
+            return self.path in self.rpc_paths
+        else:
+            # If .rpc_paths is empty, just assume all paths are legal
+            return True
+
+    def do_POST(self):
+        """Handles the HTTP POST request.
+
+        Attempts to interpret all HTTP POST requests as XML-RPC calls,
+        which are forwarded to the server's _dispatch method for handling.
+        """
+
+        # Check that the path is legal
+        if not self.is_rpc_path_valid():
+            self.report_404()
+            return
+
+        try:
+            # Get arguments by reading body of request.
+            # We read this in chunks to avoid straining
+            # socket.read(); around the 10 or 15Mb mark, some platforms
+            # begin to have problems (bug #792570).
+            max_chunk_size = 10*1024*1024
+            size_remaining = int(self.headers["content-length"])
+            L = []
+            while size_remaining:
+                chunk_size = min(size_remaining, max_chunk_size)
+                chunk = self.rfile.read(chunk_size)
+                if not chunk:
+                    break
+                L.append(chunk)
+                size_remaining -= len(L[-1])
+            data = b''.join(L)
+
+            data = self.decode_request_content(data)
+            if data is None:
+                return #response has been sent
+
+            # In previous versions of SimpleXMLRPCServer, _dispatch
+            # could be overridden in this class, instead of in
+            # SimpleXMLRPCDispatcher. To maintain backwards compatibility,
+            # check to see if a subclass implements _dispatch and dispatch
+            # using that method if present.
+            response = self.server._marshaled_dispatch(
+                    data, getattr(self, '_dispatch', None), self.path
+                )
+        except Exception as e: # This should only happen if the module is buggy
+            # internal error, report as HTTP server error
+            self.send_response(500)
+
+            # Send information about the exception if requested
+            if hasattr(self.server, '_send_traceback_header') and \
+                    self.server._send_traceback_header:
+                self.send_header("X-exception", str(e))
+                trace = traceback.format_exc()
+                trace = str(trace.encode('ASCII', 'backslashreplace'), 'ASCII')
+                self.send_header("X-traceback", trace)
+
+            self.send_header("Content-length", "0")
+            self.end_headers()
+        else:
+            self.send_response(200)
+            self.send_header("Content-type", "text/xml")
+            if self.encode_threshold is not None:
+                if len(response) > self.encode_threshold:
+                    q = self.accept_encodings().get("gzip", 0)
+                    if q:
+                        try:
+                            response = gzip_encode(response)
+                            self.send_header("Content-Encoding", "gzip")
+                        except NotImplementedError:
+                            pass
+            self.send_header("Content-length", str(len(response)))
+            self.end_headers()
+            self.wfile.write(response)
+
+    def decode_request_content(self, data):
+        #support gzip encoding of request
+        encoding = self.headers.get("content-encoding", "identity").lower()
+        if encoding == "identity":
+            return data
+        if encoding == "gzip":
+            try:
+                return gzip_decode(data)
+            except NotImplementedError:
+                self.send_response(501, "encoding %r not supported" % encoding)
+            except ValueError:
+                self.send_response(400, "error decoding gzip content")
+        else:
+            self.send_response(501, "encoding %r not supported" % encoding)
+        self.send_header("Content-length", "0")
+        self.end_headers()
+
+    def report_404 (self):
+            # Report a 404 error
+        self.send_response(404)
+        response = b'No such page'
+        self.send_header("Content-type", "text/plain")
+        self.send_header("Content-length", str(len(response)))
+        self.end_headers()
+        self.wfile.write(response)
+
+    def log_request(self, code='-', size='-'):
+        """Selectively log an accepted request."""
+
+        if self.server.logRequests:
+            BaseHTTPRequestHandler.log_request(self, code, size)
+
+class SimpleXMLRPCServer(socketserver.TCPServer,
+                         SimpleXMLRPCDispatcher):
+    """Simple XML-RPC server.
+
+    Simple XML-RPC server that allows functions and a single instance
+    to be installed to handle requests. The default implementation
+    attempts to dispatch XML-RPC calls to the functions or instance
+    installed in the server. Override the _dispatch method inherited
+    from SimpleXMLRPCDispatcher to change this behavior.
+    """
+
+    allow_reuse_address = True
+    allow_reuse_port = False
+
+    # Warning: this is for debugging purposes only! Never set this to True in
+    # production code, as will be sending out sensitive information (exception
+    # and stack trace details) when exceptions are raised inside
+    # SimpleXMLRPCRequestHandler.do_POST
+    _send_traceback_header = False
+
+    def __init__(self, addr, requestHandler=SimpleXMLRPCRequestHandler,
+                 logRequests=True, allow_none=False, encoding=None,
+                 bind_and_activate=True, use_builtin_types=False):
+        self.logRequests = logRequests
+
+        SimpleXMLRPCDispatcher.__init__(self, allow_none, encoding, use_builtin_types)
+        socketserver.TCPServer.__init__(self, addr, requestHandler, bind_and_activate)
+
+
+class MultiPathXMLRPCServer(SimpleXMLRPCServer):
+    """Multipath XML-RPC Server
+    This specialization of SimpleXMLRPCServer allows the user to create
+    multiple Dispatcher instances and assign them to different
+    HTTP request paths.  This makes it possible to run two or more
+    'virtual XML-RPC servers' at the same port.
+    Make sure that the requestHandler accepts the paths in question.
+    """
+    def __init__(self, addr, requestHandler=SimpleXMLRPCRequestHandler,
+                 logRequests=True, allow_none=False, encoding=None,
+                 bind_and_activate=True, use_builtin_types=False):
+
+        SimpleXMLRPCServer.__init__(self, addr, requestHandler, logRequests, allow_none,
+                                    encoding, bind_and_activate, use_builtin_types)
+        self.dispatchers = {}
+        self.allow_none = allow_none
+        self.encoding = encoding or 'utf-8'
+
+    def add_dispatcher(self, path, dispatcher):
+        self.dispatchers[path] = dispatcher
+        return dispatcher
+
+    def get_dispatcher(self, path):
+        return self.dispatchers[path]
+
+    def _marshaled_dispatch(self, data, dispatch_method = None, path = None):
+        try:
+            response = self.dispatchers[path]._marshaled_dispatch(
+               data, dispatch_method, path)
+        except BaseException as exc:
+            # report low level exception back to server
+            # (each dispatcher should have handled their own
+            # exceptions)
+            response = dumps(
+                Fault(1, "%s:%s" % (type(exc), exc)),
+                encoding=self.encoding, allow_none=self.allow_none)
+            response = response.encode(self.encoding, 'xmlcharrefreplace')
+        return response
+
+class CGIXMLRPCRequestHandler(SimpleXMLRPCDispatcher):
+    """Simple handler for XML-RPC data passed through CGI."""
+
+    def __init__(self, allow_none=False, encoding=None, use_builtin_types=False):
+        SimpleXMLRPCDispatcher.__init__(self, allow_none, encoding, use_builtin_types)
+
+    def handle_xmlrpc(self, request_text):
+        """Handle a single XML-RPC request"""
+
+        response = self._marshaled_dispatch(request_text)
+
+        print('Content-Type: text/xml')
+        print('Content-Length: %d' % len(response))
+        print()
+        sys.stdout.flush()
+        sys.stdout.buffer.write(response)
+        sys.stdout.buffer.flush()
+
+    def handle_get(self):
+        """Handle a single HTTP GET request.
+
+        Default implementation indicates an error because
+        XML-RPC uses the POST method.
+        """
+
+        code = 400
+        message, explain = BaseHTTPRequestHandler.responses[code]
+
+        response = http.server.DEFAULT_ERROR_MESSAGE % \
+            {
+             'code' : code,
+             'message' : message,
+             'explain' : explain
+            }
+        response = response.encode('utf-8')
+        print('Status: %d %s' % (code, message))
+        print('Content-Type: %s' % http.server.DEFAULT_ERROR_CONTENT_TYPE)
+        print('Content-Length: %d' % len(response))
+        print()
+        sys.stdout.flush()
+        sys.stdout.buffer.write(response)
+        sys.stdout.buffer.flush()
+
+    def handle_request(self, request_text=None):
+        """Handle a single XML-RPC request passed through a CGI post method.
+
+        If no XML data is given then it is read from stdin. The resulting
+        XML-RPC response is printed to stdout along with the correct HTTP
+        headers.
+        """
+
+        if request_text is None and \
+            os.environ.get('REQUEST_METHOD', None) == 'GET':
+            self.handle_get()
+        else:
+            # POST data is normally available through stdin
+            try:
+                length = int(os.environ.get('CONTENT_LENGTH', None))
+            except (ValueError, TypeError):
+                length = -1
+            if request_text is None:
+                request_text = sys.stdin.read(length)
+
+            self.handle_xmlrpc(request_text)
+
+
+# -----------------------------------------------------------------------------
+# Self documenting XML-RPC Server.
+
+class ServerHTMLDoc(pydoc.HTMLDoc):
+    """Class used to generate pydoc HTML document for a server"""
+
+    def markup(self, text, escape=None, funcs={}, classes={}, methods={}):
+        """Mark up some plain text, given a context of symbols to look for.
+        Each context dictionary maps object names to anchor names."""
+        escape = escape or self.escape
+        results = []
+        here = 0
+
+        # XXX Note that this regular expression does not allow for the
+        # hyperlinking of arbitrary strings being used as method
+        # names. Only methods with names consisting of word characters
+        # and '.'s are hyperlinked.
+        pattern = re.compile(r'\b((http|https|ftp)://\S+[\w/]|'
+                                r'RFC[- ]?(\d+)|'
+                                r'PEP[- ]?(\d+)|'
+                                r'(self\.)?((?:\w|\.)+))\b')
+        while match := pattern.search(text, here):
+            start, end = match.span()
+            results.append(escape(text[here:start]))
+
+            all, scheme, rfc, pep, selfdot, name = match.groups()
+            if scheme:
+                url = escape(all).replace('"', '&quot;')
+                results.append('<a href="%s">%s</a>' % (url, url))
+            elif rfc:
+                url = 'https://www.rfc-editor.org/rfc/rfc%d.txt' % int(rfc)
+                results.append('<a href="%s">%s</a>' % (url, escape(all)))
+            elif pep:
+                url = 'https://peps.python.org/pep-%04d/' % int(pep)
+                results.append('<a href="%s">%s</a>' % (url, escape(all)))
+            elif text[end:end+1] == '(':
+                results.append(self.namelink(name, methods, funcs, classes))
+            elif selfdot:
+                results.append('self.<strong>%s</strong>' % name)
+            else:
+                results.append(self.namelink(name, classes))
+            here = end
+        results.append(escape(text[here:]))
+        return ''.join(results)
+
+    def docroutine(self, object, name, mod=None,
+                   funcs={}, classes={}, methods={}, cl=None):
+        """Produce HTML documentation for a function or method object."""
+
+        anchor = (cl and cl.__name__ or '') + '-' + name
+        note = ''
+
+        title = '<a name="%s"><strong>%s</strong></a>' % (
+            self.escape(anchor), self.escape(name))
+
+        if callable(object):
+            argspec = str(signature(object))
+        else:
+            argspec = '(...)'
+
+        if isinstance(object, tuple):
+            argspec = object[0] or argspec
+            docstring = object[1] or ""
+        else:
+            docstring = pydoc.getdoc(object)
+
+        decl = title + argspec + (note and self.grey(
+               '<font face="helvetica, arial">%s</font>' % note))
+
+        doc = self.markup(
+            docstring, self.preformat, funcs, classes, methods)
+        doc = doc and '<dd><tt>%s</tt></dd>' % doc
+        return '<dl><dt>%s</dt>%s</dl>\n' % (decl, doc)
+
+    def docserver(self, server_name, package_documentation, methods):
+        """Produce HTML documentation for an XML-RPC server."""
+
+        fdict = {}
+        for key, value in methods.items():
+            fdict[key] = '#-' + key
+            fdict[value] = fdict[key]
+
+        server_name = self.escape(server_name)
+        head = '<big><big><strong>%s</strong></big></big>' % server_name
+        result = self.heading(head)
+
+        doc = self.markup(package_documentation, self.preformat, fdict)
+        doc = doc and '<tt>%s</tt>' % doc
+        result = result + '<p>%s</p>\n' % doc
+
+        contents = []
+        method_items = sorted(methods.items())
+        for key, value in method_items:
+            contents.append(self.docroutine(value, key, funcs=fdict))
+        result = result + self.bigsection(
+            'Methods', 'functions', ''.join(contents))
+
+        return result
+
+
+    def page(self, title, contents):
+        """Format an HTML page."""
+        css_path = "/pydoc.css"
+        css_link = (
+            '<link rel="stylesheet" type="text/css" href="%s">' %
+            css_path)
+        return '''\
+<!DOCTYPE>
+<html lang="en">
+<head>
+<meta charset="utf-8">
+<title>Python: %s</title>
+%s</head><body>%s</body></html>''' % (title, css_link, contents)
+
+class XMLRPCDocGenerator:
+    """Generates documentation for an XML-RPC server.
+
+    This class is designed as mix-in and should not
+    be constructed directly.
+    """
+
+    def __init__(self):
+        # setup variables used for HTML documentation
+        self.server_name = 'XML-RPC Server Documentation'
+        self.server_documentation = \
+            "This server exports the following methods through the XML-RPC "\
+            "protocol."
+        self.server_title = 'XML-RPC Server Documentation'
+
+    def set_server_title(self, server_title):
+        """Set the HTML title of the generated server documentation"""
+
+        self.server_title = server_title
+
+    def set_server_name(self, server_name):
+        """Set the name of the generated HTML server documentation"""
+
+        self.server_name = server_name
+
+    def set_server_documentation(self, server_documentation):
+        """Set the documentation string for the entire server."""
+
+        self.server_documentation = server_documentation
+
+    def generate_html_documentation(self):
+        """generate_html_documentation() => html documentation for the server
+
+        Generates HTML documentation for the server using introspection for
+        installed functions and instances that do not implement the
+        _dispatch method. Alternatively, instances can choose to implement
+        the _get_method_argstring(method_name) method to provide the
+        argument string used in the documentation and the
+        _methodHelp(method_name) method to provide the help text used
+        in the documentation."""
+
+        methods = {}
+
+        for method_name in self.system_listMethods():
+            if method_name in self.funcs:
+                method = self.funcs[method_name]
+            elif self.instance is not None:
+                method_info = [None, None] # argspec, documentation
+                if hasattr(self.instance, '_get_method_argstring'):
+                    method_info[0] = self.instance._get_method_argstring(method_name)
+                if hasattr(self.instance, '_methodHelp'):
+                    method_info[1] = self.instance._methodHelp(method_name)
+
+                method_info = tuple(method_info)
+                if method_info != (None, None):
+                    method = method_info
+                elif not hasattr(self.instance, '_dispatch'):
+                    try:
+                        method = resolve_dotted_attribute(
+                                    self.instance,
+                                    method_name
+                                    )
+                    except AttributeError:
+                        method = method_info
+                else:
+                    method = method_info
+            else:
+                assert 0, "Could not find method in self.functions and no "\
+                          "instance installed"
+
+            methods[method_name] = method
+
+        documenter = ServerHTMLDoc()
+        documentation = documenter.docserver(
+                                self.server_name,
+                                self.server_documentation,
+                                methods
+                            )
+
+        return documenter.page(html.escape(self.server_title), documentation)
+
+class DocXMLRPCRequestHandler(SimpleXMLRPCRequestHandler):
+    """XML-RPC and documentation request handler class.
+
+    Handles all HTTP POST requests and attempts to decode them as
+    XML-RPC requests.
+
+    Handles all HTTP GET requests and interprets them as requests
+    for documentation.
+    """
+
+    def _get_css(self, url):
+        path_here = os.path.dirname(os.path.realpath(__file__))
+        css_path = os.path.join(path_here, "..", "pydoc_data", "_pydoc.css")
+        with open(css_path, mode="rb") as fp:
+            return fp.read()
+
+    def do_GET(self):
+        """Handles the HTTP GET request.
+
+        Interpret all HTTP GET requests as requests for server
+        documentation.
+        """
+        # Check that the path is legal
+        if not self.is_rpc_path_valid():
+            self.report_404()
+            return
+
+        if self.path.endswith('.css'):
+            content_type = 'text/css'
+            response = self._get_css(self.path)
+        else:
+            content_type = 'text/html'
+            response = self.server.generate_html_documentation().encode('utf-8')
+
+        self.send_response(200)
+        self.send_header('Content-Type', '%s; charset=UTF-8' % content_type)
+        self.send_header("Content-length", str(len(response)))
+        self.end_headers()
+        self.wfile.write(response)
+
+class DocXMLRPCServer(  SimpleXMLRPCServer,
+                        XMLRPCDocGenerator):
+    """XML-RPC and HTML documentation server.
+
+    Adds the ability to serve server documentation to the capabilities
+    of SimpleXMLRPCServer.
+    """
+
+    def __init__(self, addr, requestHandler=DocXMLRPCRequestHandler,
+                 logRequests=True, allow_none=False, encoding=None,
+                 bind_and_activate=True, use_builtin_types=False):
+        SimpleXMLRPCServer.__init__(self, addr, requestHandler, logRequests,
+                                    allow_none, encoding, bind_and_activate,
+                                    use_builtin_types)
+        XMLRPCDocGenerator.__init__(self)
+
+class DocCGIXMLRPCRequestHandler(   CGIXMLRPCRequestHandler,
+                                    XMLRPCDocGenerator):
+    """Handler for XML-RPC data and documentation requests passed through
+    CGI"""
+
+    def handle_get(self):
+        """Handles the HTTP GET request.
+
+        Interpret all HTTP GET requests as requests for server
+        documentation.
+        """
+
+        response = self.generate_html_documentation().encode('utf-8')
+
+        print('Content-Type: text/html')
+        print('Content-Length: %d' % len(response))
+        print()
+        sys.stdout.flush()
+        sys.stdout.buffer.write(response)
+        sys.stdout.buffer.flush()
+
+    def __init__(self):
+        CGIXMLRPCRequestHandler.__init__(self)
+        XMLRPCDocGenerator.__init__(self)
+
+
+if __name__ == '__main__':
+    import datetime
+
+    class ExampleService:
+        def getData(self):
+            return '42'
+
+        class currentTime:
+            @staticmethod
+            def getCurrentTime():
+                return datetime.datetime.now()
+
+    with SimpleXMLRPCServer(("localhost", 8000)) as server:
+        server.register_function(pow)
+        server.register_function(lambda x,y: x+y, 'add')
+        server.register_instance(ExampleService(), allow_dotted_names=True)
+        server.register_multicall_functions()
+        print('Serving XML-RPC on localhost port 8000')
+        print('It is advisable to run this example server within a secure, closed network.')
+        try:
+            server.serve_forever()
+        except KeyboardInterrupt:
+            print("\nKeyboard interrupt received, exiting.")
+            sys.exit(0)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..19aea290b585312f566916dbcad7c6685f108524
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__init__.py
@@ -0,0 +1,2435 @@
+"""
+Read and write ZIP files.
+
+XXX references to utf-8 need further investigation.
+"""
+import binascii
+import importlib.util
+import io
+import os
+import shutil
+import stat
+import struct
+import sys
+import threading
+import time
+
+try:
+    import zlib # We may need its compression method
+    crc32 = zlib.crc32
+except ImportError:
+    zlib = None
+    crc32 = binascii.crc32
+
+try:
+    import bz2 # We may need its compression method
+except ImportError:
+    bz2 = None
+
+try:
+    import lzma # We may need its compression method
+except ImportError:
+    lzma = None
+
+try:
+    from compression import zstd # We may need its compression method
+except ImportError:
+    zstd = None
+
+__all__ = ["BadZipFile", "BadZipfile", "error",
+           "ZIP_STORED", "ZIP_DEFLATED", "ZIP_BZIP2", "ZIP_LZMA",
+           "ZIP_ZSTANDARD", "is_zipfile", "ZipInfo", "ZipFile", "PyZipFile",
+           "LargeZipFile", "Path"]
+
+class BadZipFile(Exception):
+    pass
+
+
+class LargeZipFile(Exception):
+    """
+    Raised when writing a zipfile, the zipfile requires ZIP64 extensions
+    and those extensions are disabled.
+    """
+
+error = BadZipfile = BadZipFile      # Pre-3.2 compatibility names
+
+
+ZIP64_LIMIT = (1 << 31) - 1
+ZIP_FILECOUNT_LIMIT = (1 << 16) - 1
+ZIP_MAX_COMMENT = (1 << 16) - 1
+
+# constants for Zip file compression methods
+ZIP_STORED = 0
+ZIP_DEFLATED = 8
+ZIP_BZIP2 = 12
+ZIP_LZMA = 14
+ZIP_ZSTANDARD = 93
+# Other ZIP compression methods not supported
+
+DEFAULT_VERSION = 20
+ZIP64_VERSION = 45
+BZIP2_VERSION = 46
+LZMA_VERSION = 63
+ZSTANDARD_VERSION = 63
+# we recognize (but not necessarily support) all features up to that version
+MAX_EXTRACT_VERSION = 63
+
+# Below are some formats and associated data for reading/writing headers using
+# the struct module.  The names and structures of headers/records are those used
+# in the PKWARE description of the ZIP file format:
+#     http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+# (URL valid as of January 2008)
+
+# The "end of central directory" structure, magic number, size, and indices
+# (section V.I in the format document)
+structEndArchive = b"<4s4H2LH"
+stringEndArchive = b"PK\005\006"
+sizeEndCentDir = struct.calcsize(structEndArchive)
+
+_ECD_SIGNATURE = 0
+_ECD_DISK_NUMBER = 1
+_ECD_DISK_START = 2
+_ECD_ENTRIES_THIS_DISK = 3
+_ECD_ENTRIES_TOTAL = 4
+_ECD_SIZE = 5
+_ECD_OFFSET = 6
+_ECD_COMMENT_SIZE = 7
+# These last two indices are not part of the structure as defined in the
+# spec, but they are used internally by this module as a convenience
+_ECD_COMMENT = 8
+_ECD_LOCATION = 9
+
+# The "central directory" structure, magic number, size, and indices
+# of entries in the structure (section V.F in the format document)
+structCentralDir = "<4s4B4HL2L5H2L"
+stringCentralDir = b"PK\001\002"
+sizeCentralDir = struct.calcsize(structCentralDir)
+
+# indexes of entries in the central directory structure
+_CD_SIGNATURE = 0
+_CD_CREATE_VERSION = 1
+_CD_CREATE_SYSTEM = 2
+_CD_EXTRACT_VERSION = 3
+_CD_EXTRACT_SYSTEM = 4
+_CD_FLAG_BITS = 5
+_CD_COMPRESS_TYPE = 6
+_CD_TIME = 7
+_CD_DATE = 8
+_CD_CRC = 9
+_CD_COMPRESSED_SIZE = 10
+_CD_UNCOMPRESSED_SIZE = 11
+_CD_FILENAME_LENGTH = 12
+_CD_EXTRA_FIELD_LENGTH = 13
+_CD_COMMENT_LENGTH = 14
+_CD_DISK_NUMBER_START = 15
+_CD_INTERNAL_FILE_ATTRIBUTES = 16
+_CD_EXTERNAL_FILE_ATTRIBUTES = 17
+_CD_LOCAL_HEADER_OFFSET = 18
+
+# General purpose bit flags
+# Zip Appnote: 4.4.4 general purpose bit flag: (2 bytes)
+_MASK_ENCRYPTED = 1 << 0
+# Bits 1 and 2 have different meanings depending on the compression used.
+_MASK_COMPRESS_OPTION_1 = 1 << 1
+# _MASK_COMPRESS_OPTION_2 = 1 << 2
+# _MASK_USE_DATA_DESCRIPTOR: If set, crc-32, compressed size and uncompressed
+# size are zero in the local header and the real values are written in the data
+# descriptor immediately following the compressed data.
+_MASK_USE_DATA_DESCRIPTOR = 1 << 3
+# Bit 4: Reserved for use with compression method 8, for enhanced deflating.
+# _MASK_RESERVED_BIT_4 = 1 << 4
+_MASK_COMPRESSED_PATCH = 1 << 5
+_MASK_STRONG_ENCRYPTION = 1 << 6
+# _MASK_UNUSED_BIT_7 = 1 << 7
+# _MASK_UNUSED_BIT_8 = 1 << 8
+# _MASK_UNUSED_BIT_9 = 1 << 9
+# _MASK_UNUSED_BIT_10 = 1 << 10
+_MASK_UTF_FILENAME = 1 << 11
+# Bit 12: Reserved by PKWARE for enhanced compression.
+# _MASK_RESERVED_BIT_12 = 1 << 12
+# _MASK_ENCRYPTED_CENTRAL_DIR = 1 << 13
+# Bit 14, 15: Reserved by PKWARE
+# _MASK_RESERVED_BIT_14 = 1 << 14
+# _MASK_RESERVED_BIT_15 = 1 << 15
+
+# The "local file header" structure, magic number, size, and indices
+# (section V.A in the format document)
+structFileHeader = "<4s2B4HL2L2H"
+stringFileHeader = b"PK\003\004"
+sizeFileHeader = struct.calcsize(structFileHeader)
+
+_FH_SIGNATURE = 0
+_FH_EXTRACT_VERSION = 1
+_FH_EXTRACT_SYSTEM = 2
+_FH_GENERAL_PURPOSE_FLAG_BITS = 3
+_FH_COMPRESSION_METHOD = 4
+_FH_LAST_MOD_TIME = 5
+_FH_LAST_MOD_DATE = 6
+_FH_CRC = 7
+_FH_COMPRESSED_SIZE = 8
+_FH_UNCOMPRESSED_SIZE = 9
+_FH_FILENAME_LENGTH = 10
+_FH_EXTRA_FIELD_LENGTH = 11
+
+# The "Zip64 end of central directory locator" structure, magic number, and size
+structEndArchive64Locator = "<4sLQL"
+stringEndArchive64Locator = b"PK\x06\x07"
+sizeEndCentDir64Locator = struct.calcsize(structEndArchive64Locator)
+
+# The "Zip64 end of central directory" record, magic number, size, and indices
+# (section V.G in the format document)
+structEndArchive64 = "<4sQ2H2L4Q"
+stringEndArchive64 = b"PK\x06\x06"
+sizeEndCentDir64 = struct.calcsize(structEndArchive64)
+
+_CD64_SIGNATURE = 0
+_CD64_DIRECTORY_RECSIZE = 1
+_CD64_CREATE_VERSION = 2
+_CD64_EXTRACT_VERSION = 3
+_CD64_DISK_NUMBER = 4
+_CD64_DISK_NUMBER_START = 5
+_CD64_NUMBER_ENTRIES_THIS_DISK = 6
+_CD64_NUMBER_ENTRIES_TOTAL = 7
+_CD64_DIRECTORY_SIZE = 8
+_CD64_OFFSET_START_CENTDIR = 9
+
+_DD_SIGNATURE = 0x08074b50
+
+
+class _Extra(bytes):
+    FIELD_STRUCT = struct.Struct('<HH')
+
+    def __new__(cls, val, id=None):
+        return super().__new__(cls, val)
+
+    def __init__(self, val, id=None):
+        self.id = id
+
+    @classmethod
+    def read_one(cls, raw):
+        try:
+            xid, xlen = cls.FIELD_STRUCT.unpack(raw[:4])
+        except struct.error:
+            xid = None
+            xlen = 0
+        return cls(raw[:4+xlen], xid), raw[4+xlen:]
+
+    @classmethod
+    def split(cls, data):
+        # use memoryview for zero-copy slices
+        rest = memoryview(data)
+        while rest:
+            extra, rest = _Extra.read_one(rest)
+            yield extra
+
+    @classmethod
+    def strip(cls, data, xids):
+        """Remove Extra fields with specified IDs."""
+        return b''.join(
+            ex
+            for ex in cls.split(data)
+            if ex.id not in xids
+        )
+
+
+def _check_zipfile(fp):
+    try:
+        endrec = _EndRecData(fp)
+        if endrec:
+            if endrec[_ECD_ENTRIES_TOTAL] == 0 and endrec[_ECD_SIZE] == 0 and endrec[_ECD_OFFSET] == 0:
+                return True     # Empty zipfiles are still zipfiles
+            elif endrec[_ECD_DISK_NUMBER] == endrec[_ECD_DISK_START]:
+                # Central directory is on the same disk
+                fp.seek(sum(_handle_prepended_data(endrec)))
+                if endrec[_ECD_SIZE] >= sizeCentralDir:
+                    data = fp.read(sizeCentralDir)   # CD is where we expect it to be
+                    if len(data) == sizeCentralDir:
+                        centdir = struct.unpack(structCentralDir, data) # CD is the right size
+                        if centdir[_CD_SIGNATURE] == stringCentralDir:
+                            return True         # First central directory entry  has correct magic number
+    except OSError:
+        pass
+    return False
+
+def is_zipfile(filename):
+    """Quickly see if a file is a ZIP file by checking the magic number.
+
+    The filename argument may be a file or file-like object too.
+    """
+    result = False
+    try:
+        if hasattr(filename, "read"):
+            pos = filename.tell()
+            result = _check_zipfile(fp=filename)
+            filename.seek(pos)
+        else:
+            with open(filename, "rb") as fp:
+                result = _check_zipfile(fp)
+    except (OSError, BadZipFile):
+        pass
+    return result
+
+def _handle_prepended_data(endrec, debug=0):
+    size_cd = endrec[_ECD_SIZE]             # bytes in central directory
+    offset_cd = endrec[_ECD_OFFSET]         # offset of central directory
+
+    # "concat" is zero, unless zip was concatenated to another file
+    concat = endrec[_ECD_LOCATION] - size_cd - offset_cd
+
+    if debug > 2:
+        inferred = concat + offset_cd
+        print("given, inferred, offset", offset_cd, inferred, concat)
+
+    return offset_cd, concat
+
+def _EndRecData64(fpin, offset, endrec):
+    """
+    Read the ZIP64 end-of-archive records and use that to update endrec
+    """
+    offset -= sizeEndCentDir64Locator
+    if offset < 0:
+        # The file is not large enough to contain a ZIP64
+        # end-of-archive record, so just return the end record we were given.
+        return endrec
+    fpin.seek(offset)
+    data = fpin.read(sizeEndCentDir64Locator)
+    if len(data) != sizeEndCentDir64Locator:
+        raise OSError("Unknown I/O error")
+    sig, diskno, reloff, disks = struct.unpack(structEndArchive64Locator, data)
+    if sig != stringEndArchive64Locator:
+        return endrec
+
+    if diskno != 0 or disks > 1:
+        raise BadZipFile("zipfiles that span multiple disks are not supported")
+
+    offset -= sizeEndCentDir64
+    if reloff > offset:
+        raise BadZipFile("Corrupt zip64 end of central directory locator")
+    # First, check the assumption that there is no prepended data.
+    fpin.seek(reloff)
+    extrasz = offset - reloff
+    data = fpin.read(sizeEndCentDir64)
+    if len(data) != sizeEndCentDir64:
+        raise OSError("Unknown I/O error")
+    if not data.startswith(stringEndArchive64) and reloff != offset:
+        # Since we already have seen the Zip64 EOCD Locator, it's
+        # possible we got here because there is prepended data.
+        # Assume no 'zip64 extensible data'
+        fpin.seek(offset)
+        extrasz = 0
+        data = fpin.read(sizeEndCentDir64)
+        if len(data) != sizeEndCentDir64:
+            raise OSError("Unknown I/O error")
+    if not data.startswith(stringEndArchive64):
+        raise BadZipFile("Zip64 end of central directory record not found")
+
+    sig, sz, create_version, read_version, disk_num, disk_dir, \
+        dircount, dircount2, dirsize, diroffset = \
+        struct.unpack(structEndArchive64, data)
+    if (diroffset + dirsize != reloff or
+        sz + 12 != sizeEndCentDir64 + extrasz):
+        raise BadZipFile("Corrupt zip64 end of central directory record")
+
+    # Update the original endrec using data from the ZIP64 record
+    endrec[_ECD_SIGNATURE] = sig
+    endrec[_ECD_DISK_NUMBER] = disk_num
+    endrec[_ECD_DISK_START] = disk_dir
+    endrec[_ECD_ENTRIES_THIS_DISK] = dircount
+    endrec[_ECD_ENTRIES_TOTAL] = dircount2
+    endrec[_ECD_SIZE] = dirsize
+    endrec[_ECD_OFFSET] = diroffset
+    endrec[_ECD_LOCATION] = offset - extrasz
+    return endrec
+
+
+def _EndRecData(fpin):
+    """Return data from the "End of Central Directory" record, or None.
+
+    The data is a list of the nine items in the ZIP "End of central dir"
+    record followed by a tenth item, the file seek offset of this record."""
+
+    # Determine file size
+    fpin.seek(0, 2)
+    filesize = fpin.tell()
+
+    # Check to see if this is ZIP file with no archive comment (the
+    # "end of central directory" structure should be the last item in the
+    # file if this is the case).
+    try:
+        fpin.seek(-sizeEndCentDir, 2)
+    except OSError:
+        return None
+    data = fpin.read(sizeEndCentDir)
+    if (len(data) == sizeEndCentDir and
+        data[0:4] == stringEndArchive and
+        data[-2:] == b"\000\000"):
+        # the signature is correct and there's no comment, unpack structure
+        endrec = struct.unpack(structEndArchive, data)
+        endrec=list(endrec)
+
+        # Append a blank comment and record start offset
+        endrec.append(b"")
+        endrec.append(filesize - sizeEndCentDir)
+
+        # Try to read the "Zip64 end of central directory" structure
+        return _EndRecData64(fpin, filesize - sizeEndCentDir, endrec)
+
+    # Either this is not a ZIP file, or it is a ZIP file with an archive
+    # comment.  Search the end of the file for the "end of central directory"
+    # record signature. The comment is the last item in the ZIP file and may be
+    # up to 64K long.  It is assumed that the "end of central directory" magic
+    # number does not appear in the comment.
+    maxCommentStart = max(filesize - ZIP_MAX_COMMENT - sizeEndCentDir, 0)
+    fpin.seek(maxCommentStart, 0)
+    data = fpin.read(ZIP_MAX_COMMENT + sizeEndCentDir)
+    start = data.rfind(stringEndArchive)
+    if start >= 0:
+        # found the magic number; attempt to unpack and interpret
+        recData = data[start:start+sizeEndCentDir]
+        if len(recData) != sizeEndCentDir:
+            # Zip file is corrupted.
+            return None
+        endrec = list(struct.unpack(structEndArchive, recData))
+        commentSize = endrec[_ECD_COMMENT_SIZE] #as claimed by the zip file
+        comment = data[start+sizeEndCentDir:start+sizeEndCentDir+commentSize]
+        endrec.append(comment)
+        endrec.append(maxCommentStart + start)
+
+        # Try to read the "Zip64 end of central directory" structure
+        return _EndRecData64(fpin, maxCommentStart + start, endrec)
+
+    # Unable to find a valid end of central directory structure
+    return None
+
+def _sanitize_filename(filename):
+    """Terminate the file name at the first null byte and
+    ensure paths always use forward slashes as the directory separator."""
+
+    # Terminate the file name at the first null byte.  Null bytes in file
+    # names are used as tricks by viruses in archives.
+    null_byte = filename.find(chr(0))
+    if null_byte >= 0:
+        filename = filename[0:null_byte]
+    # This is used to ensure paths in generated ZIP files always use
+    # forward slashes as the directory separator, as required by the
+    # ZIP format specification.
+    if os.sep != "/" and os.sep in filename:
+        filename = filename.replace(os.sep, "/")
+    if os.altsep and os.altsep != "/" and os.altsep in filename:
+        filename = filename.replace(os.altsep, "/")
+    return filename
+
+
+class ZipInfo:
+    """Class with attributes describing each file in the ZIP archive."""
+
+    __slots__ = (
+        'orig_filename',
+        'filename',
+        'date_time',
+        'compress_type',
+        'compress_level',
+        'comment',
+        'extra',
+        'create_system',
+        'create_version',
+        'extract_version',
+        'reserved',
+        'flag_bits',
+        'volume',
+        'internal_attr',
+        'external_attr',
+        'header_offset',
+        'CRC',
+        'compress_size',
+        'file_size',
+        '_raw_time',
+        '_end_offset',
+    )
+
+    def __init__(self, filename="NoName", date_time=(1980,1,1,0,0,0)):
+        self.orig_filename = filename   # Original file name in archive
+
+        # Terminate the file name at the first null byte and
+        # ensure paths always use forward slashes as the directory separator.
+        filename = _sanitize_filename(filename)
+
+        self.filename = filename        # Normalized file name
+        self.date_time = date_time      # year, month, day, hour, min, sec
+
+        if date_time[0] < 1980:
+            raise ValueError('ZIP does not support timestamps before 1980')
+
+        # Standard values:
+        self.compress_type = ZIP_STORED # Type of compression for the file
+        self.compress_level = None      # Level for the compressor
+        self.comment = b""              # Comment for each file
+        self.extra = b""                # ZIP extra data
+        if sys.platform == 'win32':
+            self.create_system = 0          # System which created ZIP archive
+        else:
+            # Assume everything else is unix-y
+            self.create_system = 3          # System which created ZIP archive
+        self.create_version = DEFAULT_VERSION  # Version which created ZIP archive
+        self.extract_version = DEFAULT_VERSION # Version needed to extract archive
+        self.reserved = 0               # Must be zero
+        self.flag_bits = 0              # ZIP flag bits
+        self.volume = 0                 # Volume number of file header
+        self.internal_attr = 0          # Internal attributes
+        self.external_attr = 0          # External file attributes
+        self.compress_size = 0          # Size of the compressed file
+        self.file_size = 0              # Size of the uncompressed file
+        self._end_offset = None         # Start of the next local header or central directory
+        # Other attributes are set by class ZipFile:
+        # header_offset         Byte offset to the file header
+        # CRC                   CRC-32 of the uncompressed file
+
+    # Maintain backward compatibility with the old protected attribute name.
+    @property
+    def _compresslevel(self):
+        return self.compress_level
+
+    @_compresslevel.setter
+    def _compresslevel(self, value):
+        self.compress_level = value
+
+    def __repr__(self):
+        result = ['<%s filename=%r' % (self.__class__.__name__, self.filename)]
+        if self.compress_type != ZIP_STORED:
+            result.append(' compress_type=%s' %
+                          compressor_names.get(self.compress_type,
+                                               self.compress_type))
+        hi = self.external_attr >> 16
+        lo = self.external_attr & 0xFFFF
+        if hi:
+            result.append(' filemode=%r' % stat.filemode(hi))
+        if lo:
+            result.append(' external_attr=%#x' % lo)
+        isdir = self.is_dir()
+        if not isdir or self.file_size:
+            result.append(' file_size=%r' % self.file_size)
+        if ((not isdir or self.compress_size) and
+            (self.compress_type != ZIP_STORED or
+             self.file_size != self.compress_size)):
+            result.append(' compress_size=%r' % self.compress_size)
+        result.append('>')
+        return ''.join(result)
+
+    def FileHeader(self, zip64=None):
+        """Return the per-file header as a bytes object.
+
+        When the optional zip64 arg is None rather than a bool, we will
+        decide based upon the file_size and compress_size, if known,
+        False otherwise.
+        """
+        dt = self.date_time
+        dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2]
+        dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2)
+        if self.flag_bits & _MASK_USE_DATA_DESCRIPTOR:
+            # Set these to zero because we write them after the file data
+            CRC = compress_size = file_size = 0
+        else:
+            CRC = self.CRC
+            compress_size = self.compress_size
+            file_size = self.file_size
+
+        extra = self.extra
+
+        min_version = 0
+        if zip64 is None:
+            # We always explicitly pass zip64 within this module.... This
+            # remains for anyone using ZipInfo.FileHeader as a public API.
+            zip64 = file_size > ZIP64_LIMIT or compress_size > ZIP64_LIMIT
+        if zip64:
+            fmt = '<HHQQ'
+            extra = extra + struct.pack(fmt,
+                                        1, struct.calcsize(fmt)-4, file_size, compress_size)
+            file_size = 0xffffffff
+            compress_size = 0xffffffff
+            min_version = ZIP64_VERSION
+
+        if self.compress_type == ZIP_BZIP2:
+            min_version = max(BZIP2_VERSION, min_version)
+        elif self.compress_type == ZIP_LZMA:
+            min_version = max(LZMA_VERSION, min_version)
+        elif self.compress_type == ZIP_ZSTANDARD:
+            min_version = max(ZSTANDARD_VERSION, min_version)
+
+        self.extract_version = max(min_version, self.extract_version)
+        self.create_version = max(min_version, self.create_version)
+        filename, flag_bits = self._encodeFilenameFlags()
+        header = struct.pack(structFileHeader, stringFileHeader,
+                             self.extract_version, self.reserved, flag_bits,
+                             self.compress_type, dostime, dosdate, CRC,
+                             compress_size, file_size,
+                             len(filename), len(extra))
+        return header + filename + extra
+
+    def _encodeFilenameFlags(self):
+        try:
+            return self.filename.encode('ascii'), self.flag_bits
+        except UnicodeEncodeError:
+            return self.filename.encode('utf-8'), self.flag_bits | _MASK_UTF_FILENAME
+
+    def _decodeExtra(self, filename_crc):
+        # Try to decode the extra field.
+        extra = self.extra
+        unpack = struct.unpack
+        while len(extra) >= 4:
+            tp, ln = unpack('<HH', extra[:4])
+            if ln+4 > len(extra):
+                raise BadZipFile("Corrupt extra field %04x (size=%d)" % (tp, ln))
+            if tp == 0x0001:
+                data = extra[4:ln+4]
+                # ZIP64 extension (large files and/or large archives)
+                try:
+                    if self.file_size in (0xFFFF_FFFF_FFFF_FFFF, 0xFFFF_FFFF):
+                        field = "File size"
+                        self.file_size, = unpack('<Q', data[:8])
+                        data = data[8:]
+                    if self.compress_size == 0xFFFF_FFFF:
+                        field = "Compress size"
+                        self.compress_size, = unpack('<Q', data[:8])
+                        data = data[8:]
+                    if self.header_offset == 0xFFFF_FFFF:
+                        field = "Header offset"
+                        self.header_offset, = unpack('<Q', data[:8])
+                except struct.error:
+                    raise BadZipFile(f"Corrupt zip64 extra field. "
+                                     f"{field} not found.") from None
+            elif tp == 0x7075:
+                data = extra[4:ln+4]
+                # Unicode Path Extra Field
+                try:
+                    up_version, up_name_crc = unpack('<BL', data[:5])
+                    if up_version == 1 and up_name_crc == filename_crc:
+                        up_unicode_name = data[5:].decode('utf-8')
+                        if up_unicode_name:
+                            self.filename = _sanitize_filename(up_unicode_name)
+                        else:
+                            import warnings
+                            warnings.warn("Empty unicode path extra field (0x7075)", stacklevel=2)
+                except struct.error as e:
+                    raise BadZipFile("Corrupt unicode path extra field (0x7075)") from e
+                except UnicodeDecodeError as e:
+                    raise BadZipFile('Corrupt unicode path extra field (0x7075): invalid utf-8 bytes') from e
+
+            extra = extra[ln+4:]
+
+    @classmethod
+    def from_file(cls, filename, arcname=None, *, strict_timestamps=True):
+        """Construct an appropriate ZipInfo for a file on the filesystem.
+
+        filename should be the path to a file or directory on the filesystem.
+
+        arcname is the name which it will have within the archive (by default,
+        this will be the same as filename, but without a drive letter and with
+        leading path separators removed).
+        """
+        if isinstance(filename, os.PathLike):
+            filename = os.fspath(filename)
+        st = os.stat(filename)
+        isdir = stat.S_ISDIR(st.st_mode)
+        mtime = time.localtime(st.st_mtime)
+        date_time = mtime[0:6]
+        if not strict_timestamps and date_time[0] < 1980:
+            date_time = (1980, 1, 1, 0, 0, 0)
+        elif not strict_timestamps and date_time[0] > 2107:
+            date_time = (2107, 12, 31, 23, 59, 59)
+        # Create ZipInfo instance to store file information
+        if arcname is None:
+            arcname = filename
+        arcname = os.path.normpath(os.path.splitdrive(arcname)[1])
+        while arcname[0] in (os.sep, os.altsep):
+            arcname = arcname[1:]
+        if isdir:
+            arcname += '/'
+        zinfo = cls(arcname, date_time)
+        zinfo.external_attr = (st.st_mode & 0xFFFF) << 16  # Unix attributes
+        if isdir:
+            zinfo.file_size = 0
+            zinfo.external_attr |= 0x10  # MS-DOS directory flag
+        else:
+            zinfo.file_size = st.st_size
+
+        return zinfo
+
+    def _for_archive(self, archive):
+        """Resolve suitable defaults from the archive.
+
+        Resolve the date_time, compression attributes, and external attributes
+        to suitable defaults as used by :method:`ZipFile.writestr`.
+
+        Return self.
+        """
+        # gh-91279: Set the SOURCE_DATE_EPOCH to a specific timestamp
+        epoch = os.environ.get('SOURCE_DATE_EPOCH')
+        get_time = int(epoch) if epoch else time.time()
+        self.date_time = time.localtime(get_time)[:6]
+
+        self.compress_type = archive.compression
+        self.compress_level = archive.compresslevel
+        if self.filename.endswith('/'):  # pragma: no cover
+            self.external_attr = 0o40775 << 16  # drwxrwxr-x
+            self.external_attr |= 0x10  # MS-DOS directory flag
+        else:
+            self.external_attr = 0o600 << 16  # ?rw-------
+        return self
+
+    def is_dir(self):
+        """Return True if this archive member is a directory."""
+        if self.filename.endswith('/'):
+            return True
+        # The ZIP format specification requires to use forward slashes
+        # as the directory separator, but in practice some ZIP files
+        # created on Windows can use backward slashes.  For compatibility
+        # with the extraction code which already handles this:
+        if os.path.altsep:
+            return self.filename.endswith((os.path.sep, os.path.altsep))
+        return False
+
+
+# ZIP encryption uses the CRC32 one-byte primitive for scrambling some
+# internal keys. We noticed that a direct implementation is faster than
+# relying on binascii.crc32().
+
+_crctable = None
+def _gen_crc(crc):
+    for j in range(8):
+        if crc & 1:
+            crc = (crc >> 1) ^ 0xEDB88320
+        else:
+            crc >>= 1
+    return crc
+
+# ZIP supports a password-based form of encryption. Even though known
+# plaintext attacks have been found against it, it is still useful
+# to be able to get data out of such a file.
+#
+# Usage:
+#     zd = _ZipDecrypter(mypwd)
+#     plain_bytes = zd(cypher_bytes)
+
+def _ZipDecrypter(pwd):
+    key0 = 305419896
+    key1 = 591751049
+    key2 = 878082192
+
+    global _crctable
+    if _crctable is None:
+        _crctable = list(map(_gen_crc, range(256)))
+    crctable = _crctable
+
+    def crc32(ch, crc):
+        """Compute the CRC32 primitive on one byte."""
+        return (crc >> 8) ^ crctable[(crc ^ ch) & 0xFF]
+
+    def update_keys(c):
+        nonlocal key0, key1, key2
+        key0 = crc32(c, key0)
+        key1 = (key1 + (key0 & 0xFF)) & 0xFFFFFFFF
+        key1 = (key1 * 134775813 + 1) & 0xFFFFFFFF
+        key2 = crc32(key1 >> 24, key2)
+
+    for p in pwd:
+        update_keys(p)
+
+    def decrypter(data):
+        """Decrypt a bytes object."""
+        result = bytearray()
+        append = result.append
+        for c in data:
+            k = key2 | 2
+            c ^= ((k * (k^1)) >> 8) & 0xFF
+            update_keys(c)
+            append(c)
+        return bytes(result)
+
+    return decrypter
+
+
+class LZMACompressor:
+
+    def __init__(self):
+        self._comp = None
+
+    def _init(self):
+        props = lzma._encode_filter_properties({'id': lzma.FILTER_LZMA1})
+        self._comp = lzma.LZMACompressor(lzma.FORMAT_RAW, filters=[
+            lzma._decode_filter_properties(lzma.FILTER_LZMA1, props)
+        ])
+        return struct.pack('<BBH', 9, 4, len(props)) + props
+
+    def compress(self, data):
+        if self._comp is None:
+            return self._init() + self._comp.compress(data)
+        return self._comp.compress(data)
+
+    def flush(self):
+        if self._comp is None:
+            return self._init() + self._comp.flush()
+        return self._comp.flush()
+
+
+class LZMADecompressor:
+
+    def __init__(self):
+        self._decomp = None
+        self._unconsumed = b''
+        self.eof = False
+
+    def decompress(self, data):
+        if self._decomp is None:
+            self._unconsumed += data
+            if len(self._unconsumed) <= 4:
+                return b''
+            psize, = struct.unpack('<H', self._unconsumed[2:4])
+            if len(self._unconsumed) <= 4 + psize:
+                return b''
+
+            self._decomp = lzma.LZMADecompressor(lzma.FORMAT_RAW, filters=[
+                lzma._decode_filter_properties(lzma.FILTER_LZMA1,
+                                               self._unconsumed[4:4 + psize])
+            ])
+            data = self._unconsumed[4 + psize:]
+            del self._unconsumed
+
+        result = self._decomp.decompress(data)
+        self.eof = self._decomp.eof
+        return result
+
+
+compressor_names = {
+    0: 'store',
+    1: 'shrink',
+    2: 'reduce',
+    3: 'reduce',
+    4: 'reduce',
+    5: 'reduce',
+    6: 'implode',
+    7: 'tokenize',
+    8: 'deflate',
+    9: 'deflate64',
+    10: 'implode',
+    12: 'bzip2',
+    14: 'lzma',
+    18: 'terse',
+    19: 'lz77',
+    93: 'zstd',
+    97: 'wavpack',
+    98: 'ppmd',
+}
+
+def _check_compression(compression):
+    if compression == ZIP_STORED:
+        pass
+    elif compression == ZIP_DEFLATED:
+        if not zlib:
+            raise RuntimeError(
+                "Compression requires the (missing) zlib module")
+    elif compression == ZIP_BZIP2:
+        if not bz2:
+            raise RuntimeError(
+                "Compression requires the (missing) bz2 module")
+    elif compression == ZIP_LZMA:
+        if not lzma:
+            raise RuntimeError(
+                "Compression requires the (missing) lzma module")
+    elif compression == ZIP_ZSTANDARD:
+        if not zstd:
+            raise RuntimeError(
+                "Compression requires the (missing) compression.zstd module")
+    else:
+        raise NotImplementedError("That compression method is not supported")
+
+
+def _get_compressor(compress_type, compresslevel=None):
+    if compress_type == ZIP_DEFLATED:
+        if compresslevel is not None:
+            return zlib.compressobj(compresslevel, zlib.DEFLATED, -15)
+        return zlib.compressobj(zlib.Z_DEFAULT_COMPRESSION, zlib.DEFLATED, -15)
+    elif compress_type == ZIP_BZIP2:
+        if compresslevel is not None:
+            return bz2.BZ2Compressor(compresslevel)
+        return bz2.BZ2Compressor()
+    # compresslevel is ignored for ZIP_LZMA
+    elif compress_type == ZIP_LZMA:
+        return LZMACompressor()
+    elif compress_type == ZIP_ZSTANDARD:
+        return zstd.ZstdCompressor(level=compresslevel)
+    else:
+        return None
+
+
+def _get_decompressor(compress_type):
+    _check_compression(compress_type)
+    if compress_type == ZIP_STORED:
+        return None
+    elif compress_type == ZIP_DEFLATED:
+        return zlib.decompressobj(-15)
+    elif compress_type == ZIP_BZIP2:
+        return bz2.BZ2Decompressor()
+    elif compress_type == ZIP_LZMA:
+        return LZMADecompressor()
+    elif compress_type == ZIP_ZSTANDARD:
+        return zstd.ZstdDecompressor()
+    else:
+        descr = compressor_names.get(compress_type)
+        if descr:
+            raise NotImplementedError("compression type %d (%s)" % (compress_type, descr))
+        else:
+            raise NotImplementedError("compression type %d" % (compress_type,))
+
+
+class _SharedFile:
+    def __init__(self, file, pos, close, lock, writing):
+        self._file = file
+        self._pos = pos
+        self._close = close
+        self._lock = lock
+        self._writing = writing
+        self.seekable = file.seekable
+
+    def tell(self):
+        return self._pos
+
+    def seek(self, offset, whence=0):
+        with self._lock:
+            if self._writing():
+                raise ValueError("Can't reposition in the ZIP file while "
+                        "there is an open writing handle on it. "
+                        "Close the writing handle before trying to read.")
+            if whence == os.SEEK_CUR:
+                self._file.seek(self._pos + offset)
+            else:
+                self._file.seek(offset, whence)
+            self._pos = self._file.tell()
+            return self._pos
+
+    def read(self, n=-1):
+        with self._lock:
+            if self._writing():
+                raise ValueError("Can't read from the ZIP file while there "
+                        "is an open writing handle on it. "
+                        "Close the writing handle before trying to read.")
+            self._file.seek(self._pos)
+            data = self._file.read(n)
+            self._pos = self._file.tell()
+            return data
+
+    def close(self):
+        if self._file is not None:
+            fileobj = self._file
+            self._file = None
+            self._close(fileobj)
+
+# Provide the tell method for unseekable stream
+class _Tellable:
+    def __init__(self, fp):
+        self.fp = fp
+        self.offset = 0
+
+    def write(self, data):
+        n = self.fp.write(data)
+        self.offset += n
+        return n
+
+    def tell(self):
+        return self.offset
+
+    def flush(self):
+        self.fp.flush()
+
+    def close(self):
+        self.fp.close()
+
+
+class ZipExtFile(io.BufferedIOBase):
+    """File-like object for reading an archive member.
+       Is returned by ZipFile.open().
+    """
+
+    # Max size supported by decompressor.
+    MAX_N = (1 << 31) - 1
+
+    # Read from compressed files in 4k blocks.
+    MIN_READ_SIZE = 4096
+
+    # Chunk size to read during seek
+    MAX_SEEK_READ = 1 << 24
+
+    def __init__(self, fileobj, mode, zipinfo, pwd=None,
+                 close_fileobj=False):
+        self._fileobj = fileobj
+        self._pwd = pwd
+        self._close_fileobj = close_fileobj
+
+        self._compress_type = zipinfo.compress_type
+        self._compress_left = zipinfo.compress_size
+        self._left = zipinfo.file_size
+
+        self._decompressor = _get_decompressor(self._compress_type)
+
+        self._eof = False
+        self._readbuffer = b''
+        self._offset = 0
+
+        self.newlines = None
+
+        self.mode = mode
+        self.name = zipinfo.filename
+
+        if hasattr(zipinfo, 'CRC'):
+            self._expected_crc = zipinfo.CRC
+            self._running_crc = crc32(b'')
+        else:
+            self._expected_crc = None
+
+        self._seekable = False
+        try:
+            if fileobj.seekable():
+                self._orig_compress_start = fileobj.tell()
+                self._orig_compress_size = zipinfo.compress_size
+                self._orig_file_size = zipinfo.file_size
+                self._orig_start_crc = self._running_crc
+                self._orig_crc = self._expected_crc
+                self._seekable = True
+        except AttributeError:
+            pass
+
+        self._decrypter = None
+        if pwd:
+            if zipinfo.flag_bits & _MASK_USE_DATA_DESCRIPTOR:
+                # compare against the file type from extended local headers
+                check_byte = (zipinfo._raw_time >> 8) & 0xff
+            else:
+                # compare against the CRC otherwise
+                check_byte = (zipinfo.CRC >> 24) & 0xff
+            h = self._init_decrypter()
+            if h != check_byte:
+                raise RuntimeError("Bad password for file %r" % zipinfo.orig_filename)
+
+
+    def _init_decrypter(self):
+        self._decrypter = _ZipDecrypter(self._pwd)
+        # The first 12 bytes in the cypher stream is an encryption header
+        #  used to strengthen the algorithm. The first 11 bytes are
+        #  completely random, while the 12th contains the MSB of the CRC,
+        #  or the MSB of the file time depending on the header type
+        #  and is used to check the correctness of the password.
+        header = self._fileobj.read(12)
+        self._compress_left -= 12
+        return self._decrypter(header)[11]
+
+    def __repr__(self):
+        result = ['<%s.%s' % (self.__class__.__module__,
+                              self.__class__.__qualname__)]
+        if not self.closed:
+            result.append(' name=%r' % (self.name,))
+            if self._compress_type != ZIP_STORED:
+                result.append(' compress_type=%s' %
+                              compressor_names.get(self._compress_type,
+                                                   self._compress_type))
+        else:
+            result.append(' [closed]')
+        result.append('>')
+        return ''.join(result)
+
+    def readline(self, limit=-1):
+        """Read and return a line from the stream.
+
+        If limit is specified, at most limit bytes will be read.
+        """
+
+        if limit < 0:
+            # Shortcut common case - newline found in buffer.
+            i = self._readbuffer.find(b'\n', self._offset) + 1
+            if i > 0:
+                line = self._readbuffer[self._offset: i]
+                self._offset = i
+                return line
+
+        return io.BufferedIOBase.readline(self, limit)
+
+    def peek(self, n=1):
+        """Returns buffered bytes without advancing the position."""
+        if n > len(self._readbuffer) - self._offset:
+            chunk = self.read(n)
+            if len(chunk) > self._offset:
+                self._readbuffer = chunk + self._readbuffer[self._offset:]
+                self._offset = 0
+            else:
+                self._offset -= len(chunk)
+
+        # Return up to 512 bytes to reduce allocation overhead for tight loops.
+        return self._readbuffer[self._offset: self._offset + 512]
+
+    def readable(self):
+        if self.closed:
+            raise ValueError("I/O operation on closed file.")
+        return True
+
+    def read(self, n=-1):
+        """Read and return up to n bytes.
+        If the argument is omitted, None, or negative, data is read and returned until EOF is reached.
+        """
+        if self.closed:
+            raise ValueError("read from closed file.")
+        if n is None or n < 0:
+            buf = self._readbuffer[self._offset:]
+            self._readbuffer = b''
+            self._offset = 0
+            while not self._eof:
+                buf += self._read1(self.MAX_N)
+            return buf
+
+        end = n + self._offset
+        if end < len(self._readbuffer):
+            buf = self._readbuffer[self._offset:end]
+            self._offset = end
+            return buf
+
+        n = end - len(self._readbuffer)
+        buf = self._readbuffer[self._offset:]
+        self._readbuffer = b''
+        self._offset = 0
+        while n > 0 and not self._eof:
+            data = self._read1(n)
+            if n < len(data):
+                self._readbuffer = data
+                self._offset = n
+                buf += data[:n]
+                break
+            buf += data
+            n -= len(data)
+        return buf
+
+    def _update_crc(self, newdata):
+        # Update the CRC using the given data.
+        if self._expected_crc is None:
+            # No need to compute the CRC if we don't have a reference value
+            return
+        self._running_crc = crc32(newdata, self._running_crc)
+        # Check the CRC if we're at the end of the file
+        if self._eof and self._running_crc != self._expected_crc:
+            raise BadZipFile("Bad CRC-32 for file %r" % self.name)
+
+    def read1(self, n):
+        """Read up to n bytes with at most one read() system call."""
+
+        if n is None or n < 0:
+            buf = self._readbuffer[self._offset:]
+            self._readbuffer = b''
+            self._offset = 0
+            while not self._eof:
+                data = self._read1(self.MAX_N)
+                if data:
+                    buf += data
+                    break
+            return buf
+
+        end = n + self._offset
+        if end < len(self._readbuffer):
+            buf = self._readbuffer[self._offset:end]
+            self._offset = end
+            return buf
+
+        n = end - len(self._readbuffer)
+        buf = self._readbuffer[self._offset:]
+        self._readbuffer = b''
+        self._offset = 0
+        if n > 0:
+            while not self._eof:
+                data = self._read1(n)
+                if n < len(data):
+                    self._readbuffer = data
+                    self._offset = n
+                    buf += data[:n]
+                    break
+                if data:
+                    buf += data
+                    break
+        return buf
+
+    def _read1(self, n):
+        # Read up to n compressed bytes with at most one read() system call,
+        # decrypt and decompress them.
+        if self._eof or n <= 0:
+            return b''
+
+        # Read from file.
+        if self._compress_type == ZIP_DEFLATED:
+            ## Handle unconsumed data.
+            data = self._decompressor.unconsumed_tail
+            if n > len(data):
+                data += self._read2(n - len(data))
+        else:
+            data = self._read2(n)
+
+        if self._compress_type == ZIP_STORED:
+            self._eof = self._compress_left <= 0
+        elif self._compress_type == ZIP_DEFLATED:
+            n = max(n, self.MIN_READ_SIZE)
+            data = self._decompressor.decompress(data, n)
+            self._eof = (self._decompressor.eof or
+                         self._compress_left <= 0 and
+                         not self._decompressor.unconsumed_tail)
+            if self._eof:
+                data += self._decompressor.flush()
+        else:
+            data = self._decompressor.decompress(data)
+            self._eof = self._decompressor.eof or self._compress_left <= 0
+
+        data = data[:self._left]
+        self._left -= len(data)
+        if self._left <= 0:
+            self._eof = True
+        self._update_crc(data)
+        return data
+
+    def _read2(self, n):
+        if self._compress_left <= 0:
+            return b''
+
+        n = max(n, self.MIN_READ_SIZE)
+        n = min(n, self._compress_left)
+
+        data = self._fileobj.read(n)
+        self._compress_left -= len(data)
+        if not data:
+            raise EOFError
+
+        if self._decrypter is not None:
+            data = self._decrypter(data)
+        return data
+
+    def close(self):
+        try:
+            if self._close_fileobj:
+                self._fileobj.close()
+        finally:
+            super().close()
+
+    def seekable(self):
+        if self.closed:
+            raise ValueError("I/O operation on closed file.")
+        return self._seekable
+
+    def seek(self, offset, whence=os.SEEK_SET):
+        if self.closed:
+            raise ValueError("seek on closed file.")
+        if not self._seekable:
+            raise io.UnsupportedOperation("underlying stream is not seekable")
+        curr_pos = self.tell()
+        if whence == os.SEEK_SET:
+            new_pos = offset
+        elif whence == os.SEEK_CUR:
+            new_pos = curr_pos + offset
+        elif whence == os.SEEK_END:
+            new_pos = self._orig_file_size + offset
+        else:
+            raise ValueError("whence must be os.SEEK_SET (0), "
+                             "os.SEEK_CUR (1), or os.SEEK_END (2)")
+
+        if new_pos > self._orig_file_size:
+            new_pos = self._orig_file_size
+
+        if new_pos < 0:
+            new_pos = 0
+
+        read_offset = new_pos - curr_pos
+        buff_offset = read_offset + self._offset
+
+        if buff_offset >= 0 and buff_offset < len(self._readbuffer):
+            # Just move the _offset index if the new position is in the _readbuffer
+            self._offset = buff_offset
+            read_offset = 0
+        # Fast seek uncompressed unencrypted file
+        elif self._compress_type == ZIP_STORED and self._decrypter is None and read_offset != 0:
+            # disable CRC checking after first seeking - it would be invalid
+            self._expected_crc = None
+            # seek actual file taking already buffered data into account
+            read_offset -= len(self._readbuffer) - self._offset
+            self._fileobj.seek(read_offset, os.SEEK_CUR)
+            self._left -= read_offset
+            self._compress_left -= read_offset
+            self._eof = self._left <= 0
+            read_offset = 0
+            # flush read buffer
+            self._readbuffer = b''
+            self._offset = 0
+        elif read_offset < 0:
+            # Position is before the current position. Reset the ZipExtFile
+            self._fileobj.seek(self._orig_compress_start)
+            self._running_crc = self._orig_start_crc
+            self._expected_crc = self._orig_crc
+            self._compress_left = self._orig_compress_size
+            self._left = self._orig_file_size
+            self._readbuffer = b''
+            self._offset = 0
+            self._decompressor = _get_decompressor(self._compress_type)
+            self._eof = False
+            read_offset = new_pos
+            if self._decrypter is not None:
+                self._init_decrypter()
+
+        while read_offset > 0:
+            read_len = min(self.MAX_SEEK_READ, read_offset)
+            self.read(read_len)
+            read_offset -= read_len
+
+        return self.tell()
+
+    def tell(self):
+        if self.closed:
+            raise ValueError("tell on closed file.")
+        if not self._seekable:
+            raise io.UnsupportedOperation("underlying stream is not seekable")
+        filepos = self._orig_file_size - self._left - len(self._readbuffer) + self._offset
+        return filepos
+
+
+class _ZipWriteFile(io.BufferedIOBase):
+    def __init__(self, zf, zinfo, zip64):
+        self._zinfo = zinfo
+        self._zip64 = zip64
+        self._zipfile = zf
+        self._compressor = _get_compressor(zinfo.compress_type,
+                                           zinfo.compress_level)
+        self._file_size = 0
+        self._compress_size = 0
+        self._crc = 0
+
+    @property
+    def _fileobj(self):
+        return self._zipfile.fp
+
+    @property
+    def name(self):
+        return self._zinfo.filename
+
+    @property
+    def mode(self):
+        return 'wb'
+
+    def writable(self):
+        return True
+
+    def write(self, data):
+        if self.closed:
+            raise ValueError('I/O operation on closed file.')
+
+        # Accept any data that supports the buffer protocol
+        if isinstance(data, (bytes, bytearray)):
+            nbytes = len(data)
+        else:
+            data = memoryview(data)
+            nbytes = data.nbytes
+        self._file_size += nbytes
+
+        self._crc = crc32(data, self._crc)
+        if self._compressor:
+            data = self._compressor.compress(data)
+            self._compress_size += len(data)
+        self._fileobj.write(data)
+        return nbytes
+
+    def close(self):
+        if self.closed:
+            return
+        try:
+            super().close()
+            # Flush any data from the compressor, and update header info
+            if self._compressor:
+                buf = self._compressor.flush()
+                self._compress_size += len(buf)
+                self._fileobj.write(buf)
+                self._zinfo.compress_size = self._compress_size
+            else:
+                self._zinfo.compress_size = self._file_size
+            self._zinfo.CRC = self._crc
+            self._zinfo.file_size = self._file_size
+
+            if not self._zip64:
+                if self._file_size > ZIP64_LIMIT:
+                    raise RuntimeError("File size too large, try using force_zip64")
+                if self._compress_size > ZIP64_LIMIT:
+                    raise RuntimeError("Compressed size too large, try using force_zip64")
+
+            # Write updated header info
+            if self._zinfo.flag_bits & _MASK_USE_DATA_DESCRIPTOR:
+                # Write CRC and file sizes after the file data
+                fmt = '<LLQQ' if self._zip64 else '<LLLL'
+                self._fileobj.write(struct.pack(fmt, _DD_SIGNATURE, self._zinfo.CRC,
+                    self._zinfo.compress_size, self._zinfo.file_size))
+                self._zipfile.start_dir = self._fileobj.tell()
+            else:
+                # Seek backwards and write file header (which will now include
+                # correct CRC and file sizes)
+
+                # Preserve current position in file
+                self._zipfile.start_dir = self._fileobj.tell()
+                self._fileobj.seek(self._zinfo.header_offset)
+                self._fileobj.write(self._zinfo.FileHeader(self._zip64))
+                self._fileobj.seek(self._zipfile.start_dir)
+
+            # Successfully written: Add file to our caches
+            self._zipfile.filelist.append(self._zinfo)
+            self._zipfile.NameToInfo[self._zinfo.filename] = self._zinfo
+        finally:
+            self._zipfile._writing = False
+
+
+
+class ZipFile:
+    """ Class with methods to open, read, write, close, list zip files.
+
+    z = ZipFile(file, mode="r", compression=ZIP_STORED, allowZip64=True,
+                compresslevel=None)
+
+    file: Either the path to the file, or a file-like object.
+          If it is a path, the file will be opened and closed by ZipFile.
+    mode: The mode can be either read 'r', write 'w', exclusive create 'x',
+          or append 'a'.
+    compression: ZIP_STORED (no compression), ZIP_DEFLATED (requires zlib),
+                 ZIP_BZIP2 (requires bz2), ZIP_LZMA (requires lzma), or
+                 ZIP_ZSTANDARD (requires compression.zstd).
+    allowZip64: if True ZipFile will create files with ZIP64 extensions when
+                needed, otherwise it will raise an exception when this would
+                be necessary.
+    compresslevel: None (default for the given compression type) or an integer
+                   specifying the level to pass to the compressor.
+                   When using ZIP_STORED or ZIP_LZMA this keyword has no effect.
+                   When using ZIP_DEFLATED integers 0 through 9 are accepted.
+                   When using ZIP_BZIP2 integers 1 through 9 are accepted.
+                   When using ZIP_ZSTANDARD integers -7 though 22 are common,
+                   see the CompressionParameter enum in compression.zstd for
+                   details.
+
+    """
+
+    fp = None                   # Set here since __del__ checks it
+    _windows_illegal_name_trans_table = None
+
+    def __init__(self, file, mode="r", compression=ZIP_STORED, allowZip64=True,
+                 compresslevel=None, *, strict_timestamps=True, metadata_encoding=None):
+        """Open the ZIP file with mode read 'r', write 'w', exclusive create 'x',
+        or append 'a'."""
+        if mode not in ('r', 'w', 'x', 'a'):
+            raise ValueError("ZipFile requires mode 'r', 'w', 'x', or 'a'")
+
+        _check_compression(compression)
+
+        self._allowZip64 = allowZip64
+        self._didModify = False
+        self.debug = 0  # Level of printing: 0 through 3
+        self.NameToInfo = {}    # Find file info given name
+        self.filelist = []      # List of ZipInfo instances for archive
+        self.compression = compression  # Method of compression
+        self.compresslevel = compresslevel
+        self.mode = mode
+        self.pwd = None
+        self._comment = b''
+        self._strict_timestamps = strict_timestamps
+        self.metadata_encoding = metadata_encoding
+
+        # Check that we don't try to write with nonconforming codecs
+        if self.metadata_encoding and mode != 'r':
+            raise ValueError(
+                "metadata_encoding is only supported for reading files")
+
+        # Check if we were passed a file-like object
+        if isinstance(file, os.PathLike):
+            file = os.fspath(file)
+        if isinstance(file, str):
+            # No, it's a filename
+            self._filePassed = 0
+            self.filename = file
+            modeDict = {'r' : 'rb', 'w': 'w+b', 'x': 'x+b', 'a' : 'r+b',
+                        'r+b': 'w+b', 'w+b': 'wb', 'x+b': 'xb'}
+            filemode = modeDict[mode]
+            while True:
+                try:
+                    self.fp = io.open(file, filemode)
+                except OSError:
+                    if filemode in modeDict:
+                        filemode = modeDict[filemode]
+                        continue
+                    raise
+                break
+        else:
+            self._filePassed = 1
+            self.fp = file
+            self.filename = getattr(file, 'name', None)
+        self._fileRefCnt = 1
+        self._lock = threading.RLock()
+        self._seekable = True
+        self._writing = False
+
+        try:
+            if mode == 'r':
+                self._RealGetContents()
+            elif mode in ('w', 'x'):
+                # set the modified flag so central directory gets written
+                # even if no files are added to the archive
+                self._didModify = True
+                try:
+                    self.start_dir = self.fp.tell()
+                except (AttributeError, OSError):
+                    self.fp = _Tellable(self.fp)
+                    self.start_dir = 0
+                    self._seekable = False
+                else:
+                    # Some file-like objects can provide tell() but not seek()
+                    try:
+                        self.fp.seek(self.start_dir)
+                    except (AttributeError, OSError):
+                        self._seekable = False
+            elif mode == 'a':
+                try:
+                    # See if file is a zip file
+                    self._RealGetContents()
+                    # seek to start of directory and overwrite
+                    self.fp.seek(self.start_dir)
+                except BadZipFile:
+                    # file is not a zip file, just append
+                    self.fp.seek(0, 2)
+
+                    # set the modified flag so central directory gets written
+                    # even if no files are added to the archive
+                    self._didModify = True
+                    self.start_dir = self.fp.tell()
+            else:
+                raise ValueError("Mode must be 'r', 'w', 'x', or 'a'")
+        except:
+            fp = self.fp
+            self.fp = None
+            self._fpclose(fp)
+            raise
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, type, value, traceback):
+        self.close()
+
+    def __repr__(self):
+        result = ['<%s.%s' % (self.__class__.__module__,
+                              self.__class__.__qualname__)]
+        if self.fp is not None:
+            if self._filePassed:
+                result.append(' file=%r' % self.fp)
+            elif self.filename is not None:
+                result.append(' filename=%r' % self.filename)
+            result.append(' mode=%r' % self.mode)
+        else:
+            result.append(' [closed]')
+        result.append('>')
+        return ''.join(result)
+
+    def _RealGetContents(self):
+        """Read in the table of contents for the ZIP file."""
+        fp = self.fp
+        try:
+            endrec = _EndRecData(fp)
+        except OSError:
+            raise BadZipFile("File is not a zip file")
+        if not endrec:
+            raise BadZipFile("File is not a zip file")
+        if self.debug > 1:
+            print(endrec)
+        self._comment = endrec[_ECD_COMMENT]    # archive comment
+
+        offset_cd, concat = _handle_prepended_data(endrec, self.debug)
+
+        # self.start_dir:  Position of start of central directory
+        self.start_dir = offset_cd + concat
+
+        if self.start_dir < 0:
+            raise BadZipFile("Bad offset for central directory")
+        fp.seek(self.start_dir, 0)
+        size_cd = endrec[_ECD_SIZE]
+        data = fp.read(size_cd)
+        fp = io.BytesIO(data)
+        total = 0
+        while total < size_cd:
+            centdir = fp.read(sizeCentralDir)
+            if len(centdir) != sizeCentralDir:
+                raise BadZipFile("Truncated central directory")
+            centdir = struct.unpack(structCentralDir, centdir)
+            if centdir[_CD_SIGNATURE] != stringCentralDir:
+                raise BadZipFile("Bad magic number for central directory")
+            if self.debug > 2:
+                print(centdir)
+            filename = fp.read(centdir[_CD_FILENAME_LENGTH])
+            orig_filename_crc = crc32(filename)
+            flags = centdir[_CD_FLAG_BITS]
+            if flags & _MASK_UTF_FILENAME:
+                # UTF-8 file names extension
+                filename = filename.decode('utf-8')
+            else:
+                # Historical ZIP filename encoding
+                filename = filename.decode(self.metadata_encoding or 'cp437')
+            # Create ZipInfo instance to store file information
+            x = ZipInfo(filename)
+            x.extra = fp.read(centdir[_CD_EXTRA_FIELD_LENGTH])
+            x.comment = fp.read(centdir[_CD_COMMENT_LENGTH])
+            x.header_offset = centdir[_CD_LOCAL_HEADER_OFFSET]
+            (x.create_version, x.create_system, x.extract_version, x.reserved,
+             x.flag_bits, x.compress_type, t, d,
+             x.CRC, x.compress_size, x.file_size) = centdir[1:12]
+            if x.extract_version > MAX_EXTRACT_VERSION:
+                raise NotImplementedError("zip file version %.1f" %
+                                          (x.extract_version / 10))
+            x.volume, x.internal_attr, x.external_attr = centdir[15:18]
+            # Convert date/time code to (year, month, day, hour, min, sec)
+            x._raw_time = t
+            x.date_time = ( (d>>9)+1980, (d>>5)&0xF, d&0x1F,
+                            t>>11, (t>>5)&0x3F, (t&0x1F) * 2 )
+            x._decodeExtra(orig_filename_crc)
+            x.header_offset = x.header_offset + concat
+            self.filelist.append(x)
+            self.NameToInfo[x.filename] = x
+
+            # update total bytes read from central directory
+            total = (total + sizeCentralDir + centdir[_CD_FILENAME_LENGTH]
+                     + centdir[_CD_EXTRA_FIELD_LENGTH]
+                     + centdir[_CD_COMMENT_LENGTH])
+
+            if self.debug > 2:
+                print("total", total)
+
+        end_offset = self.start_dir
+        for zinfo in reversed(sorted(self.filelist,
+                                     key=lambda zinfo: zinfo.header_offset)):
+            zinfo._end_offset = end_offset
+            end_offset = zinfo.header_offset
+
+    def namelist(self):
+        """Return a list of file names in the archive."""
+        return [data.filename for data in self.filelist]
+
+    def infolist(self):
+        """Return a list of class ZipInfo instances for files in the
+        archive."""
+        return self.filelist
+
+    def printdir(self, file=None):
+        """Print a table of contents for the zip file."""
+        print("%-46s %19s %12s" % ("File Name", "Modified    ", "Size"),
+              file=file)
+        for zinfo in self.filelist:
+            date = "%d-%02d-%02d %02d:%02d:%02d" % zinfo.date_time[:6]
+            print("%-46s %s %12d" % (zinfo.filename, date, zinfo.file_size),
+                  file=file)
+
+    def testzip(self):
+        """Read all the files and check the CRC.
+
+        Return None if all files could be read successfully, or the name
+        of the offending file otherwise."""
+        chunk_size = 2 ** 20
+        for zinfo in self.filelist:
+            try:
+                # Read by chunks, to avoid an OverflowError or a
+                # MemoryError with very large embedded files.
+                with self.open(zinfo.filename, "r") as f:
+                    while f.read(chunk_size):     # Check CRC-32
+                        pass
+            except BadZipFile:
+                return zinfo.filename
+
+    def getinfo(self, name):
+        """Return the instance of ZipInfo given 'name'."""
+        info = self.NameToInfo.get(name)
+        if info is None:
+            raise KeyError(
+                'There is no item named %r in the archive' % name)
+
+        return info
+
+    def setpassword(self, pwd):
+        """Set default password for encrypted files."""
+        if pwd and not isinstance(pwd, bytes):
+            raise TypeError("pwd: expected bytes, got %s" % type(pwd).__name__)
+        if pwd:
+            self.pwd = pwd
+        else:
+            self.pwd = None
+
+    @property
+    def comment(self):
+        """The comment text associated with the ZIP file."""
+        return self._comment
+
+    @comment.setter
+    def comment(self, comment):
+        if not isinstance(comment, bytes):
+            raise TypeError("comment: expected bytes, got %s" % type(comment).__name__)
+        # check for valid comment length
+        if len(comment) > ZIP_MAX_COMMENT:
+            import warnings
+            warnings.warn('Archive comment is too long; truncating to %d bytes'
+                          % ZIP_MAX_COMMENT, stacklevel=2)
+            comment = comment[:ZIP_MAX_COMMENT]
+        self._comment = comment
+        self._didModify = True
+
+    def read(self, name, pwd=None):
+        """Return file bytes for name. 'pwd' is the password to decrypt
+        encrypted files."""
+        with self.open(name, "r", pwd) as fp:
+            return fp.read()
+
+    def open(self, name, mode="r", pwd=None, *, force_zip64=False):
+        """Return file-like object for 'name'.
+
+        name is a string for the file name within the ZIP file, or a ZipInfo
+        object.
+
+        mode should be 'r' to read a file already in the ZIP file, or 'w' to
+        write to a file newly added to the archive.
+
+        pwd is the password to decrypt files (only used for reading).
+
+        When writing, if the file size is not known in advance but may exceed
+        2 GiB, pass force_zip64 to use the ZIP64 format, which can handle large
+        files.  If the size is known in advance, it is best to pass a ZipInfo
+        instance for name, with zinfo.file_size set.
+        """
+        if mode not in {"r", "w"}:
+            raise ValueError('open() requires mode "r" or "w"')
+        if pwd and (mode == "w"):
+            raise ValueError("pwd is only supported for reading files")
+        if not self.fp:
+            raise ValueError(
+                "Attempt to use ZIP archive that was already closed")
+
+        # Make sure we have an info object
+        if isinstance(name, ZipInfo):
+            # 'name' is already an info object
+            zinfo = name
+        elif mode == 'w':
+            zinfo = ZipInfo(name)
+            zinfo.compress_type = self.compression
+            zinfo.compress_level = self.compresslevel
+        else:
+            # Get info object for name
+            zinfo = self.getinfo(name)
+
+        if mode == 'w':
+            return self._open_to_write(zinfo, force_zip64=force_zip64)
+
+        if self._writing:
+            raise ValueError("Can't read from the ZIP file while there "
+                    "is an open writing handle on it. "
+                    "Close the writing handle before trying to read.")
+
+        # Open for reading:
+        self._fileRefCnt += 1
+        zef_file = _SharedFile(self.fp, zinfo.header_offset,
+                               self._fpclose, self._lock, lambda: self._writing)
+        try:
+            # Skip the file header:
+            fheader = zef_file.read(sizeFileHeader)
+            if len(fheader) != sizeFileHeader:
+                raise BadZipFile("Truncated file header")
+            fheader = struct.unpack(structFileHeader, fheader)
+            if fheader[_FH_SIGNATURE] != stringFileHeader:
+                raise BadZipFile("Bad magic number for file header")
+
+            fname = zef_file.read(fheader[_FH_FILENAME_LENGTH])
+            if fheader[_FH_EXTRA_FIELD_LENGTH]:
+                zef_file.seek(fheader[_FH_EXTRA_FIELD_LENGTH], whence=1)
+
+            if zinfo.flag_bits & _MASK_COMPRESSED_PATCH:
+                # Zip 2.7: compressed patched data
+                raise NotImplementedError("compressed patched data (flag bit 5)")
+
+            if zinfo.flag_bits & _MASK_STRONG_ENCRYPTION:
+                # strong encryption
+                raise NotImplementedError("strong encryption (flag bit 6)")
+
+            if fheader[_FH_GENERAL_PURPOSE_FLAG_BITS] & _MASK_UTF_FILENAME:
+                # UTF-8 filename
+                fname_str = fname.decode("utf-8")
+            else:
+                fname_str = fname.decode(self.metadata_encoding or "cp437")
+
+            if fname_str != zinfo.orig_filename:
+                raise BadZipFile(
+                    'File name in directory %r and header %r differ.'
+                    % (zinfo.orig_filename, fname))
+
+            if (zinfo._end_offset is not None and
+                zef_file.tell() + zinfo.compress_size > zinfo._end_offset):
+                if zinfo._end_offset == zinfo.header_offset:
+                    import warnings
+                    warnings.warn(
+                        f"Overlapped entries: {zinfo.orig_filename!r} "
+                        f"(possible zip bomb)",
+                        skip_file_prefixes=(os.path.dirname(__file__),))
+                else:
+                    raise BadZipFile(
+                        f"Overlapped entries: {zinfo.orig_filename!r} "
+                        f"(possible zip bomb)")
+
+            # check for encrypted flag & handle password
+            is_encrypted = zinfo.flag_bits & _MASK_ENCRYPTED
+            if is_encrypted:
+                if not pwd:
+                    pwd = self.pwd
+                if pwd and not isinstance(pwd, bytes):
+                    raise TypeError("pwd: expected bytes, got %s" % type(pwd).__name__)
+                if not pwd:
+                    raise RuntimeError("File %r is encrypted, password "
+                                       "required for extraction" % name)
+            else:
+                pwd = None
+
+            return ZipExtFile(zef_file, mode + 'b', zinfo, pwd, True)
+        except:
+            zef_file.close()
+            raise
+
+    def _open_to_write(self, zinfo, force_zip64=False):
+        if force_zip64 and not self._allowZip64:
+            raise ValueError(
+                "force_zip64 is True, but allowZip64 was False when opening "
+                "the ZIP file."
+            )
+        if self._writing:
+            raise ValueError("Can't write to the ZIP file while there is "
+                             "another write handle open on it. "
+                             "Close the first handle before opening another.")
+
+        # Size and CRC are overwritten with correct data after processing the file
+        zinfo.compress_size = 0
+        zinfo.CRC = 0
+
+        zinfo.flag_bits = 0x00
+        if zinfo.compress_type == ZIP_LZMA:
+            # Compressed data includes an end-of-stream (EOS) marker
+            zinfo.flag_bits |= _MASK_COMPRESS_OPTION_1
+        if not self._seekable:
+            zinfo.flag_bits |= _MASK_USE_DATA_DESCRIPTOR
+
+        if not zinfo.external_attr:
+            zinfo.external_attr = 0o600 << 16  # permissions: ?rw-------
+
+        # Compressed size can be larger than uncompressed size
+        zip64 = force_zip64 or (zinfo.file_size * 1.05 > ZIP64_LIMIT)
+        if not self._allowZip64 and zip64:
+            raise LargeZipFile("Filesize would require ZIP64 extensions")
+
+        if self._seekable:
+            self.fp.seek(self.start_dir)
+        zinfo.header_offset = self.fp.tell()
+
+        self._writecheck(zinfo)
+        self._didModify = True
+
+        self.fp.write(zinfo.FileHeader(zip64))
+
+        self._writing = True
+        return _ZipWriteFile(self, zinfo, zip64)
+
+    def extract(self, member, path=None, pwd=None):
+        """Extract a member from the archive to the current working directory,
+           using its full name. Its file information is extracted as accurately
+           as possible. 'member' may be a filename or a ZipInfo object. You can
+           specify a different directory using 'path'. You can specify the
+           password to decrypt the file using 'pwd'.
+        """
+        if path is None:
+            path = os.getcwd()
+        else:
+            path = os.fspath(path)
+
+        return self._extract_member(member, path, pwd)
+
+    def extractall(self, path=None, members=None, pwd=None):
+        """Extract all members from the archive to the current working
+           directory. 'path' specifies a different directory to extract to.
+           'members' is optional and must be a subset of the list returned
+           by namelist(). You can specify the password to decrypt all files
+           using 'pwd'.
+        """
+        if members is None:
+            members = self.namelist()
+
+        if path is None:
+            path = os.getcwd()
+        else:
+            path = os.fspath(path)
+
+        for zipinfo in members:
+            self._extract_member(zipinfo, path, pwd)
+
+    @classmethod
+    def _sanitize_windows_name(cls, arcname, pathsep):
+        """Replace bad characters and remove trailing dots from parts."""
+        table = cls._windows_illegal_name_trans_table
+        if not table:
+            illegal = ':<>|"?*'
+            table = str.maketrans(illegal, '_' * len(illegal))
+            cls._windows_illegal_name_trans_table = table
+        arcname = arcname.translate(table)
+        # remove trailing dots and spaces
+        arcname = (x.rstrip(' .') for x in arcname.split(pathsep))
+        # rejoin, removing empty parts.
+        arcname = pathsep.join(x for x in arcname if x)
+        return arcname
+
+    def _extract_member(self, member, targetpath, pwd):
+        """Extract the ZipInfo object 'member' to a physical
+           file on the path targetpath.
+        """
+        if not isinstance(member, ZipInfo):
+            member = self.getinfo(member)
+
+        # build the destination pathname, replacing
+        # forward slashes to platform specific separators.
+        arcname = member.filename.replace('/', os.path.sep)
+
+        if os.path.altsep:
+            arcname = arcname.replace(os.path.altsep, os.path.sep)
+        # interpret absolute pathname as relative, remove drive letter or
+        # UNC path, redundant separators, "." and ".." components.
+        arcname = os.path.splitdrive(arcname)[1]
+        invalid_path_parts = ('', os.path.curdir, os.path.pardir)
+        arcname = os.path.sep.join(x for x in arcname.split(os.path.sep)
+                                   if x not in invalid_path_parts)
+        if os.path.sep == '\\':
+            # filter illegal characters on Windows
+            arcname = self._sanitize_windows_name(arcname, os.path.sep)
+
+        if not arcname and not member.is_dir():
+            raise ValueError("Empty filename.")
+
+        targetpath = os.path.join(targetpath, arcname)
+        targetpath = os.path.normpath(targetpath)
+
+        # Create all upper directories if necessary.
+        upperdirs = os.path.dirname(targetpath)
+        if upperdirs and not os.path.exists(upperdirs):
+            os.makedirs(upperdirs, exist_ok=True)
+
+        if member.is_dir():
+            if not os.path.isdir(targetpath):
+                try:
+                    os.mkdir(targetpath)
+                except FileExistsError:
+                    if not os.path.isdir(targetpath):
+                        raise
+            return targetpath
+
+        with self.open(member, pwd=pwd) as source, \
+             open(targetpath, "wb") as target:
+            shutil.copyfileobj(source, target)
+
+        return targetpath
+
+    def _writecheck(self, zinfo):
+        """Check for errors before writing a file to the archive."""
+        if zinfo.filename in self.NameToInfo:
+            import warnings
+            warnings.warn('Duplicate name: %r' % zinfo.filename, stacklevel=3)
+        if self.mode not in ('w', 'x', 'a'):
+            raise ValueError("write() requires mode 'w', 'x', or 'a'")
+        if not self.fp:
+            raise ValueError(
+                "Attempt to write ZIP archive that was already closed")
+        _check_compression(zinfo.compress_type)
+        if not self._allowZip64:
+            requires_zip64 = None
+            if len(self.filelist) >= ZIP_FILECOUNT_LIMIT:
+                requires_zip64 = "Files count"
+            elif zinfo.file_size > ZIP64_LIMIT:
+                requires_zip64 = "Filesize"
+            elif zinfo.header_offset > ZIP64_LIMIT:
+                requires_zip64 = "Zipfile size"
+            if requires_zip64:
+                raise LargeZipFile(requires_zip64 +
+                                   " would require ZIP64 extensions")
+
+    def write(self, filename, arcname=None,
+              compress_type=None, compresslevel=None):
+        """Put the bytes from filename into the archive under the name
+        arcname."""
+        if not self.fp:
+            raise ValueError(
+                "Attempt to write to ZIP archive that was already closed")
+        if self._writing:
+            raise ValueError(
+                "Can't write to ZIP archive while an open writing handle exists"
+            )
+
+        zinfo = ZipInfo.from_file(filename, arcname,
+                                  strict_timestamps=self._strict_timestamps)
+
+        if zinfo.is_dir():
+            zinfo.compress_size = 0
+            zinfo.CRC = 0
+            self.mkdir(zinfo)
+        else:
+            if compress_type is not None:
+                zinfo.compress_type = compress_type
+            else:
+                zinfo.compress_type = self.compression
+
+            if compresslevel is not None:
+                zinfo.compress_level = compresslevel
+            else:
+                zinfo.compress_level = self.compresslevel
+
+            with open(filename, "rb") as src, self.open(zinfo, 'w') as dest:
+                shutil.copyfileobj(src, dest, 1024*8)
+
+    def writestr(self, zinfo_or_arcname, data,
+                 compress_type=None, compresslevel=None):
+        """Write a file into the archive.  The contents is 'data', which
+        may be either a 'str' or a 'bytes' instance; if it is a 'str',
+        it is encoded as UTF-8 first.
+        'zinfo_or_arcname' is either a ZipInfo instance or
+        the name of the file in the archive."""
+        if isinstance(data, str):
+            data = data.encode("utf-8")
+        if isinstance(zinfo_or_arcname, ZipInfo):
+            zinfo = zinfo_or_arcname
+        else:
+            zinfo = ZipInfo(zinfo_or_arcname)._for_archive(self)
+
+        if not self.fp:
+            raise ValueError(
+                "Attempt to write to ZIP archive that was already closed")
+        if self._writing:
+            raise ValueError(
+                "Can't write to ZIP archive while an open writing handle exists."
+            )
+
+        if compress_type is not None:
+            zinfo.compress_type = compress_type
+
+        if compresslevel is not None:
+            zinfo.compress_level = compresslevel
+
+        zinfo.file_size = len(data)            # Uncompressed size
+        with self._lock:
+            with self.open(zinfo, mode='w') as dest:
+                dest.write(data)
+
+    def mkdir(self, zinfo_or_directory_name, mode=511):
+        """Creates a directory inside the zip archive."""
+        if isinstance(zinfo_or_directory_name, ZipInfo):
+            zinfo = zinfo_or_directory_name
+            if not zinfo.is_dir():
+                raise ValueError("The given ZipInfo does not describe a directory")
+        elif isinstance(zinfo_or_directory_name, str):
+            directory_name = zinfo_or_directory_name
+            if not directory_name.endswith("/"):
+                directory_name += "/"
+            zinfo = ZipInfo(directory_name)
+            zinfo.compress_size = 0
+            zinfo.CRC = 0
+            zinfo.external_attr = ((0o40000 | mode) & 0xFFFF) << 16
+            zinfo.file_size = 0
+            zinfo.external_attr |= 0x10
+        else:
+            raise TypeError("Expected type str or ZipInfo")
+
+        with self._lock:
+            if self._seekable:
+                self.fp.seek(self.start_dir)
+            zinfo.header_offset = self.fp.tell()  # Start of header bytes
+            if zinfo.compress_type == ZIP_LZMA:
+            # Compressed data includes an end-of-stream (EOS) marker
+                zinfo.flag_bits |= _MASK_COMPRESS_OPTION_1
+
+            self._writecheck(zinfo)
+            self._didModify = True
+
+            self.filelist.append(zinfo)
+            self.NameToInfo[zinfo.filename] = zinfo
+            self.fp.write(zinfo.FileHeader(False))
+            self.start_dir = self.fp.tell()
+
+    def __del__(self):
+        """Call the "close()" method in case the user forgot."""
+        self.close()
+
+    def close(self):
+        """Close the file, and for mode 'w', 'x' and 'a' write the ending
+        records."""
+        if self.fp is None:
+            return
+
+        if self._writing:
+            raise ValueError("Can't close the ZIP file while there is "
+                             "an open writing handle on it. "
+                             "Close the writing handle before closing the zip.")
+
+        try:
+            if self.mode in ('w', 'x', 'a') and self._didModify: # write ending records
+                with self._lock:
+                    if self._seekable:
+                        self.fp.seek(self.start_dir)
+                    self._write_end_record()
+        finally:
+            fp = self.fp
+            self.fp = None
+            self._fpclose(fp)
+
+    def _write_end_record(self):
+        for zinfo in self.filelist:         # write central directory
+            dt = zinfo.date_time
+            dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2]
+            dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2)
+            extra = []
+            if zinfo.file_size > ZIP64_LIMIT \
+               or zinfo.compress_size > ZIP64_LIMIT:
+                extra.append(zinfo.file_size)
+                extra.append(zinfo.compress_size)
+                file_size = 0xffffffff
+                compress_size = 0xffffffff
+            else:
+                file_size = zinfo.file_size
+                compress_size = zinfo.compress_size
+
+            if zinfo.header_offset > ZIP64_LIMIT:
+                extra.append(zinfo.header_offset)
+                header_offset = 0xffffffff
+            else:
+                header_offset = zinfo.header_offset
+
+            extra_data = zinfo.extra
+            min_version = 0
+            if extra:
+                # Append a ZIP64 field to the extra's
+                extra_data = _Extra.strip(extra_data, (1,))
+                extra_data = struct.pack(
+                    '<HH' + 'Q'*len(extra),
+                    1, 8*len(extra), *extra) + extra_data
+
+                min_version = ZIP64_VERSION
+
+            if zinfo.compress_type == ZIP_BZIP2:
+                min_version = max(BZIP2_VERSION, min_version)
+            elif zinfo.compress_type == ZIP_LZMA:
+                min_version = max(LZMA_VERSION, min_version)
+            elif zinfo.compress_type == ZIP_ZSTANDARD:
+                min_version = max(ZSTANDARD_VERSION, min_version)
+
+            extract_version = max(min_version, zinfo.extract_version)
+            create_version = max(min_version, zinfo.create_version)
+            filename, flag_bits = zinfo._encodeFilenameFlags()
+            centdir = struct.pack(structCentralDir,
+                                  stringCentralDir, create_version,
+                                  zinfo.create_system, extract_version, zinfo.reserved,
+                                  flag_bits, zinfo.compress_type, dostime, dosdate,
+                                  zinfo.CRC, compress_size, file_size,
+                                  len(filename), len(extra_data), len(zinfo.comment),
+                                  0, zinfo.internal_attr, zinfo.external_attr,
+                                  header_offset)
+            self.fp.write(centdir)
+            self.fp.write(filename)
+            self.fp.write(extra_data)
+            self.fp.write(zinfo.comment)
+
+        pos2 = self.fp.tell()
+        # Write end-of-zip-archive record
+        centDirCount = len(self.filelist)
+        centDirSize = pos2 - self.start_dir
+        centDirOffset = self.start_dir
+        requires_zip64 = None
+        if centDirCount > ZIP_FILECOUNT_LIMIT:
+            requires_zip64 = "Files count"
+        elif centDirOffset > ZIP64_LIMIT:
+            requires_zip64 = "Central directory offset"
+        elif centDirSize > ZIP64_LIMIT:
+            requires_zip64 = "Central directory size"
+        if requires_zip64:
+            # Need to write the ZIP64 end-of-archive records
+            if not self._allowZip64:
+                raise LargeZipFile(requires_zip64 +
+                                   " would require ZIP64 extensions")
+            zip64endrec = struct.pack(
+                structEndArchive64, stringEndArchive64,
+                sizeEndCentDir64 - 12, 45, 45, 0, 0, centDirCount, centDirCount,
+                centDirSize, centDirOffset)
+            self.fp.write(zip64endrec)
+
+            zip64locrec = struct.pack(
+                structEndArchive64Locator,
+                stringEndArchive64Locator, 0, pos2, 1)
+            self.fp.write(zip64locrec)
+            centDirCount = min(centDirCount, 0xFFFF)
+            centDirSize = min(centDirSize, 0xFFFFFFFF)
+            centDirOffset = min(centDirOffset, 0xFFFFFFFF)
+
+        endrec = struct.pack(structEndArchive, stringEndArchive,
+                             0, 0, centDirCount, centDirCount,
+                             centDirSize, centDirOffset, len(self._comment))
+        self.fp.write(endrec)
+        self.fp.write(self._comment)
+        if self.mode == "a":
+            self.fp.truncate()
+        self.fp.flush()
+
+    def _fpclose(self, fp):
+        assert self._fileRefCnt > 0
+        self._fileRefCnt -= 1
+        if not self._fileRefCnt and not self._filePassed:
+            fp.close()
+
+
+class PyZipFile(ZipFile):
+    """Class to create ZIP archives with Python library files and packages."""
+
+    def __init__(self, file, mode="r", compression=ZIP_STORED,
+                 allowZip64=True, optimize=-1):
+        ZipFile.__init__(self, file, mode=mode, compression=compression,
+                         allowZip64=allowZip64)
+        self._optimize = optimize
+
+    def writepy(self, pathname, basename="", filterfunc=None):
+        """Add all files from "pathname" to the ZIP archive.
+
+        If pathname is a package directory, search the directory and
+        all package subdirectories recursively for all *.py and enter
+        the modules into the archive.  If pathname is a plain
+        directory, listdir *.py and enter all modules.  Else, pathname
+        must be a Python *.py file and the module will be put into the
+        archive.  Added modules are always module.pyc.
+        This method will compile the module.py into module.pyc if
+        necessary.
+        If filterfunc(pathname) is given, it is called with every argument.
+        When it is False, the file or directory is skipped.
+        """
+        pathname = os.fspath(pathname)
+        if filterfunc and not filterfunc(pathname):
+            if self.debug:
+                label = 'path' if os.path.isdir(pathname) else 'file'
+                print('%s %r skipped by filterfunc' % (label, pathname))
+            return
+        dir, name = os.path.split(pathname)
+        if os.path.isdir(pathname):
+            initname = os.path.join(pathname, "__init__.py")
+            if os.path.isfile(initname):
+                # This is a package directory, add it
+                if basename:
+                    basename = "%s/%s" % (basename, name)
+                else:
+                    basename = name
+                if self.debug:
+                    print("Adding package in", pathname, "as", basename)
+                fname, arcname = self._get_codename(initname[0:-3], basename)
+                if self.debug:
+                    print("Adding", arcname)
+                self.write(fname, arcname)
+                dirlist = sorted(os.listdir(pathname))
+                dirlist.remove("__init__.py")
+                # Add all *.py files and package subdirectories
+                for filename in dirlist:
+                    path = os.path.join(pathname, filename)
+                    root, ext = os.path.splitext(filename)
+                    if os.path.isdir(path):
+                        if os.path.isfile(os.path.join(path, "__init__.py")):
+                            # This is a package directory, add it
+                            self.writepy(path, basename,
+                                         filterfunc=filterfunc)  # Recursive call
+                    elif ext == ".py":
+                        if filterfunc and not filterfunc(path):
+                            if self.debug:
+                                print('file %r skipped by filterfunc' % path)
+                            continue
+                        fname, arcname = self._get_codename(path[0:-3],
+                                                            basename)
+                        if self.debug:
+                            print("Adding", arcname)
+                        self.write(fname, arcname)
+            else:
+                # This is NOT a package directory, add its files at top level
+                if self.debug:
+                    print("Adding files from directory", pathname)
+                for filename in sorted(os.listdir(pathname)):
+                    path = os.path.join(pathname, filename)
+                    root, ext = os.path.splitext(filename)
+                    if ext == ".py":
+                        if filterfunc and not filterfunc(path):
+                            if self.debug:
+                                print('file %r skipped by filterfunc' % path)
+                            continue
+                        fname, arcname = self._get_codename(path[0:-3],
+                                                            basename)
+                        if self.debug:
+                            print("Adding", arcname)
+                        self.write(fname, arcname)
+        else:
+            if pathname[-3:] != ".py":
+                raise RuntimeError(
+                    'Files added with writepy() must end with ".py"')
+            fname, arcname = self._get_codename(pathname[0:-3], basename)
+            if self.debug:
+                print("Adding file", arcname)
+            self.write(fname, arcname)
+
+    def _get_codename(self, pathname, basename):
+        """Return (filename, archivename) for the path.
+
+        Given a module name path, return the correct file path and
+        archive name, compiling if necessary.  For example, given
+        /python/lib/string, return (/python/lib/string.pyc, string).
+        """
+        def _compile(file, optimize=-1):
+            import py_compile
+            if self.debug:
+                print("Compiling", file)
+            try:
+                py_compile.compile(file, doraise=True, optimize=optimize)
+            except py_compile.PyCompileError as err:
+                print(err.msg)
+                return False
+            return True
+
+        file_py  = pathname + ".py"
+        file_pyc = pathname + ".pyc"
+        pycache_opt0 = importlib.util.cache_from_source(file_py, optimization='')
+        pycache_opt1 = importlib.util.cache_from_source(file_py, optimization=1)
+        pycache_opt2 = importlib.util.cache_from_source(file_py, optimization=2)
+        if self._optimize == -1:
+            # legacy mode: use whatever file is present
+            if (os.path.isfile(file_pyc) and
+                  os.stat(file_pyc).st_mtime >= os.stat(file_py).st_mtime):
+                # Use .pyc file.
+                arcname = fname = file_pyc
+            elif (os.path.isfile(pycache_opt0) and
+                  os.stat(pycache_opt0).st_mtime >= os.stat(file_py).st_mtime):
+                # Use the __pycache__/*.pyc file, but write it to the legacy pyc
+                # file name in the archive.
+                fname = pycache_opt0
+                arcname = file_pyc
+            elif (os.path.isfile(pycache_opt1) and
+                  os.stat(pycache_opt1).st_mtime >= os.stat(file_py).st_mtime):
+                # Use the __pycache__/*.pyc file, but write it to the legacy pyc
+                # file name in the archive.
+                fname = pycache_opt1
+                arcname = file_pyc
+            elif (os.path.isfile(pycache_opt2) and
+                  os.stat(pycache_opt2).st_mtime >= os.stat(file_py).st_mtime):
+                # Use the __pycache__/*.pyc file, but write it to the legacy pyc
+                # file name in the archive.
+                fname = pycache_opt2
+                arcname = file_pyc
+            else:
+                # Compile py into PEP 3147 pyc file.
+                if _compile(file_py):
+                    if sys.flags.optimize == 0:
+                        fname = pycache_opt0
+                    elif sys.flags.optimize == 1:
+                        fname = pycache_opt1
+                    else:
+                        fname = pycache_opt2
+                    arcname = file_pyc
+                else:
+                    fname = arcname = file_py
+        else:
+            # new mode: use given optimization level
+            if self._optimize == 0:
+                fname = pycache_opt0
+                arcname = file_pyc
+            else:
+                arcname = file_pyc
+                if self._optimize == 1:
+                    fname = pycache_opt1
+                elif self._optimize == 2:
+                    fname = pycache_opt2
+                else:
+                    msg = "invalid value for 'optimize': {!r}".format(self._optimize)
+                    raise ValueError(msg)
+            if not (os.path.isfile(fname) and
+                    os.stat(fname).st_mtime >= os.stat(file_py).st_mtime):
+                if not _compile(file_py, optimize=self._optimize):
+                    fname = arcname = file_py
+        archivename = os.path.split(arcname)[1]
+        if basename:
+            archivename = "%s/%s" % (basename, archivename)
+        return (fname, archivename)
+
+
+def main(args=None):
+    import argparse
+
+    description = 'A simple command-line interface for zipfile module.'
+    parser = argparse.ArgumentParser(description=description, color=True)
+    group = parser.add_mutually_exclusive_group(required=True)
+    group.add_argument('-l', '--list', metavar='<zipfile>',
+                       help='Show listing of a zipfile')
+    group.add_argument('-e', '--extract', nargs=2,
+                       metavar=('<zipfile>', '<output_dir>'),
+                       help='Extract zipfile into target dir')
+    group.add_argument('-c', '--create', nargs='+',
+                       metavar=('<name>', '<file>'),
+                       help='Create zipfile from sources')
+    group.add_argument('-t', '--test', metavar='<zipfile>',
+                       help='Test if a zipfile is valid')
+    parser.add_argument('--metadata-encoding', metavar='<encoding>',
+                        help='Specify encoding of member names for -l, -e and -t')
+    args = parser.parse_args(args)
+
+    encoding = args.metadata_encoding
+
+    if args.test is not None:
+        src = args.test
+        with ZipFile(src, 'r', metadata_encoding=encoding) as zf:
+            badfile = zf.testzip()
+        if badfile:
+            print("The following enclosed file is corrupted: {!r}".format(badfile))
+        print("Done testing")
+
+    elif args.list is not None:
+        src = args.list
+        with ZipFile(src, 'r', metadata_encoding=encoding) as zf:
+            zf.printdir()
+
+    elif args.extract is not None:
+        src, curdir = args.extract
+        with ZipFile(src, 'r', metadata_encoding=encoding) as zf:
+            zf.extractall(curdir)
+
+    elif args.create is not None:
+        if encoding:
+            print("Non-conforming encodings not supported with -c.",
+                  file=sys.stderr)
+            sys.exit(1)
+
+        zip_name = args.create.pop(0)
+        files = args.create
+
+        def addToZip(zf, path, zippath):
+            if os.path.isfile(path):
+                zf.write(path, zippath, ZIP_DEFLATED)
+            elif os.path.isdir(path):
+                if zippath:
+                    zf.write(path, zippath)
+                for nm in sorted(os.listdir(path)):
+                    addToZip(zf,
+                             os.path.join(path, nm), os.path.join(zippath, nm))
+            # else: ignore
+
+        with ZipFile(zip_name, 'w') as zf:
+            for path in files:
+                zippath = os.path.basename(path)
+                if not zippath:
+                    zippath = os.path.basename(os.path.dirname(path))
+                if zippath in ('', os.curdir, os.pardir):
+                    zippath = ''
+                addToZip(zf, path, zippath)
+
+
+from ._path import (  # noqa: E402
+    Path,
+
+    # used privately for tests
+    CompleteDirs,  # noqa: F401
+)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__main__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__main__.py
new file mode 100644
index 0000000000000000000000000000000000000000..868d99efc3c4a317b869b9bfc30a0ccf857ca73e
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zipfile/__main__.py
@@ -0,0 +1,4 @@
+from . import main
+
+if __name__ == "__main__":
+    main()
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/__init__.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/__init__.py
new file mode 100644
index 0000000000000000000000000000000000000000..df2ae909f53cf29a49ec35a051e03ad7c37204fa
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/__init__.py
@@ -0,0 +1,34 @@
+__all__ = [
+    "ZoneInfo",
+    "reset_tzpath",
+    "available_timezones",
+    "TZPATH",
+    "ZoneInfoNotFoundError",
+    "InvalidTZPathWarning",
+]
+
+from . import _tzpath
+from ._common import ZoneInfoNotFoundError
+
+try:
+    from _zoneinfo import ZoneInfo
+except (ImportError, AttributeError):  # pragma: nocover
+    # AttributeError: module 'datetime' has no attribute 'datetime_CAPI'.
+    # This happens when the '_datetime' module is not available and the
+    # pure Python implementation is used instead.
+    from ._zoneinfo import ZoneInfo
+
+reset_tzpath = _tzpath.reset_tzpath
+available_timezones = _tzpath.available_timezones
+InvalidTZPathWarning = _tzpath.InvalidTZPathWarning
+
+
+def __getattr__(name):
+    if name == "TZPATH":
+        return _tzpath.TZPATH
+    else:
+        raise AttributeError(f"module {__name__!r} has no attribute {name!r}")
+
+
+def __dir__():
+    return sorted(list(globals()) + ["TZPATH"])
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_common.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_common.py
new file mode 100644
index 0000000000000000000000000000000000000000..98668c15d8bf94b67c0649a58d3f071071296efd
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_common.py
@@ -0,0 +1,172 @@
+import struct
+
+
+def load_tzdata(key):
+    from importlib import resources
+
+    components = key.split("/")
+    package_name = ".".join(["tzdata.zoneinfo"] + components[:-1])
+    resource_name = components[-1]
+
+    try:
+        path = resources.files(package_name).joinpath(resource_name)
+        # gh-85702: Prevent PermissionError on Windows
+        if path.is_dir():
+            raise IsADirectoryError
+        return path.open("rb")
+    except (ImportError, FileNotFoundError, UnicodeEncodeError, IsADirectoryError):
+        # There are four types of exception that can be raised that all amount
+        # to "we cannot find this key":
+        #
+        # ImportError: If package_name doesn't exist (e.g. if tzdata is not
+        #   installed, or if there's an error in the folder name like
+        #   Amrica/New_York)
+        # FileNotFoundError: If resource_name doesn't exist in the package
+        #   (e.g. Europe/Krasnoy)
+        # UnicodeEncodeError: If package_name or resource_name are not UTF-8,
+        #   such as keys containing a surrogate character.
+        # IsADirectoryError: If package_name without a resource_name specified.
+        raise ZoneInfoNotFoundError(f"No time zone found with key {key}")
+
+
+def load_data(fobj):
+    header = _TZifHeader.from_file(fobj)
+
+    if header.version == 1:
+        time_size = 4
+        time_type = "l"
+    else:
+        # Version 2+ has 64-bit integer transition times
+        time_size = 8
+        time_type = "q"
+
+        # Version 2+ also starts with a Version 1 header and data, which
+        # we need to skip now
+        skip_bytes = (
+            header.timecnt * 5  # Transition times and types
+            + header.typecnt * 6  # Local time type records
+            + header.charcnt  # Time zone designations
+            + header.leapcnt * 8  # Leap second records
+            + header.isstdcnt  # Standard/wall indicators
+            + header.isutcnt  # UT/local indicators
+        )
+
+        fobj.seek(skip_bytes, 1)
+
+        # Now we need to read the second header, which is not the same
+        # as the first
+        header = _TZifHeader.from_file(fobj)
+
+    typecnt = header.typecnt
+    timecnt = header.timecnt
+    charcnt = header.charcnt
+
+    # The data portion starts with timecnt transitions and indices
+    if timecnt:
+        trans_list_utc = struct.unpack(
+            f">{timecnt}{time_type}", fobj.read(timecnt * time_size)
+        )
+        trans_idx = struct.unpack(f">{timecnt}B", fobj.read(timecnt))
+
+        if max(trans_idx) >= typecnt:
+            raise ValueError("Invalid transition index found while reading TZif: "
+                            f"{max(trans_idx)}")
+    else:
+        trans_list_utc = ()
+        trans_idx = ()
+
+    # Read the ttinfo struct, (utoff, isdst, abbrind)
+    if typecnt:
+        utcoff, isdst, abbrind = zip(
+            *(struct.unpack(">lbb", fobj.read(6)) for i in range(typecnt))
+        )
+    else:
+        utcoff = ()
+        isdst = ()
+        abbrind = ()
+
+    # Now read the abbreviations. They are null-terminated strings, indexed
+    # not by position in the array but by position in the unsplit
+    # abbreviation string. I suppose this makes more sense in C, which uses
+    # null to terminate the strings, but it's inconvenient here...
+    abbr_vals = {}
+    abbr_chars = fobj.read(charcnt)
+
+    def get_abbr(idx):
+        # Gets a string starting at idx and running until the next \x00
+        #
+        # We cannot pre-populate abbr_vals by splitting on \x00 because there
+        # are some zones that use subsets of longer abbreviations, like so:
+        #
+        #  LMT\x00AHST\x00HDT\x00
+        #
+        # Where the idx to abbr mapping should be:
+        #
+        # {0: "LMT", 4: "AHST", 5: "HST", 9: "HDT"}
+        if idx not in abbr_vals:
+            span_end = abbr_chars.find(b"\x00", idx)
+            abbr_vals[idx] = abbr_chars[idx:span_end].decode()
+
+        return abbr_vals[idx]
+
+    abbr = tuple(get_abbr(idx) for idx in abbrind)
+
+    # The remainder of the file consists of leap seconds (currently unused) and
+    # the standard/wall and ut/local indicators, which are metadata we don't need.
+    # In version 2 files, we need to skip the unnecessary data to get at the TZ string:
+    if header.version >= 2:
+        # Each leap second record has size (time_size + 4)
+        skip_bytes = header.isutcnt + header.isstdcnt + header.leapcnt * 12
+        fobj.seek(skip_bytes, 1)
+
+        c = fobj.read(1)  # Should be \n
+        assert c == b"\n", c
+
+        line = fobj.readline()
+        if not line.endswith(b"\n"):
+            raise ValueError("Invalid TZif file: unexpected end of file")
+        tz_str = line.rstrip(b"\n")
+    else:
+        tz_str = None
+
+    return trans_idx, trans_list_utc, utcoff, isdst, abbr, tz_str
+
+
+class _TZifHeader:
+    __slots__ = [
+        "version",
+        "isutcnt",
+        "isstdcnt",
+        "leapcnt",
+        "timecnt",
+        "typecnt",
+        "charcnt",
+    ]
+
+    def __init__(self, *args):
+        for attr, val in zip(self.__slots__, args, strict=True):
+            setattr(self, attr, val)
+
+    @classmethod
+    def from_file(cls, stream):
+        # The header starts with a 4-byte "magic" value
+        if stream.read(4) != b"TZif":
+            raise ValueError("Invalid TZif file: magic not found")
+
+        _version = stream.read(1)
+        if _version == b"\x00":
+            version = 1
+        else:
+            version = int(_version)
+        stream.read(15)
+
+        args = (version,)
+
+        # Slots are defined in the order that the bytes are arranged
+        args = args + struct.unpack(">6l", stream.read(24))
+
+        return cls(*args)
+
+
+class ZoneInfoNotFoundError(KeyError):
+    """Exception raised when a ZoneInfo key is not found."""
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_tzpath.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_tzpath.py
new file mode 100644
index 0000000000000000000000000000000000000000..177d32c35eff29625c2edaea6489a3e45641c77f
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_tzpath.py
@@ -0,0 +1,189 @@
+import os
+import sysconfig
+
+
+def _reset_tzpath(to=None, stacklevel=4):
+    global TZPATH
+
+    tzpaths = to
+    if tzpaths is not None:
+        if isinstance(tzpaths, (str, bytes)):
+            raise TypeError(
+                f"tzpaths must be a list or tuple, "
+                + f"not {type(tzpaths)}: {tzpaths!r}"
+            )
+
+        tzpaths = [os.fspath(p) for p in tzpaths]
+        if not all(isinstance(p, str) for p in tzpaths):
+            raise TypeError(
+                "All elements of a tzpath sequence must be strings or "
+                "os.PathLike objects which convert to strings."
+            )
+
+        if not all(map(os.path.isabs, tzpaths)):
+            raise ValueError(_get_invalid_paths_message(tzpaths))
+        base_tzpath = tzpaths
+    else:
+        env_var = os.environ.get("PYTHONTZPATH", None)
+        if env_var is None:
+            env_var = sysconfig.get_config_var("TZPATH")
+        base_tzpath = _parse_python_tzpath(env_var, stacklevel)
+
+    TZPATH = tuple(base_tzpath)
+
+
+def reset_tzpath(to=None):
+    """Reset global TZPATH."""
+    # We need `_reset_tzpath` helper function because it produces a warning,
+    # it is used as both a module-level call and a public API.
+    # This is how we equalize the stacklevel for both calls.
+    _reset_tzpath(to)
+
+
+def _parse_python_tzpath(env_var, stacklevel):
+    if not env_var:
+        return ()
+
+    raw_tzpath = env_var.split(os.pathsep)
+    new_tzpath = tuple(filter(os.path.isabs, raw_tzpath))
+
+    # If anything has been filtered out, we will warn about it
+    if len(new_tzpath) != len(raw_tzpath):
+        import warnings
+
+        msg = _get_invalid_paths_message(raw_tzpath)
+
+        warnings.warn(
+            "Invalid paths specified in PYTHONTZPATH environment variable. "
+            + msg,
+            InvalidTZPathWarning,
+            stacklevel=stacklevel,
+        )
+
+    return new_tzpath
+
+
+def _get_invalid_paths_message(tzpaths):
+    invalid_paths = (path for path in tzpaths if not os.path.isabs(path))
+
+    prefix = "\n    "
+    indented_str = prefix + prefix.join(invalid_paths)
+
+    return (
+        "Paths should be absolute but found the following relative paths:"
+        + indented_str
+    )
+
+
+def find_tzfile(key):
+    """Retrieve the path to a TZif file from a key."""
+    _validate_tzfile_path(key)
+    for search_path in TZPATH:
+        filepath = os.path.join(search_path, key)
+        if os.path.isfile(filepath):
+            return filepath
+
+    return None
+
+
+_TEST_PATH = os.path.normpath(os.path.join("_", "_"))[:-1]
+
+
+def _validate_tzfile_path(path, _base=_TEST_PATH):
+    if os.path.isabs(path):
+        raise ValueError(
+            f"ZoneInfo keys may not be absolute paths, got: {path}"
+        )
+
+    # We only care about the kinds of path normalizations that would change the
+    # length of the key - e.g. a/../b -> a/b, or a/b/ -> a/b. On Windows,
+    # normpath will also change from a/b to a\b, but that would still preserve
+    # the length.
+    new_path = os.path.normpath(path)
+    if len(new_path) != len(path):
+        raise ValueError(
+            f"ZoneInfo keys must be normalized relative paths, got: {path}"
+        )
+
+    resolved = os.path.normpath(os.path.join(_base, new_path))
+    if not resolved.startswith(_base):
+        raise ValueError(
+            f"ZoneInfo keys must refer to subdirectories of TZPATH, got: {path}"
+        )
+
+
+del _TEST_PATH
+
+
+def available_timezones():
+    """Returns a set containing all available time zones.
+
+    .. caution::
+
+        This may attempt to open a large number of files, since the best way to
+        determine if a given file on the time zone search path is to open it
+        and check for the "magic string" at the beginning.
+    """
+    from importlib import resources
+
+    valid_zones = set()
+
+    # Start with loading from the tzdata package if it exists: this has a
+    # pre-assembled list of zones that only requires opening one file.
+    try:
+        zones_file = resources.files("tzdata").joinpath("zones")
+        with zones_file.open("r", encoding="utf-8") as f:
+            for zone in f:
+                zone = zone.strip()
+                if zone:
+                    valid_zones.add(zone)
+    except (ImportError, FileNotFoundError):
+        pass
+
+    def valid_key(fpath):
+        try:
+            with open(fpath, "rb") as f:
+                return f.read(4) == b"TZif"
+        except Exception:  # pragma: nocover
+            return False
+
+    for tz_root in TZPATH:
+        if not os.path.exists(tz_root):
+            continue
+
+        for root, dirnames, files in os.walk(tz_root):
+            if root == tz_root:
+                # right/ and posix/ are special directories and shouldn't be
+                # included in the output of available zones
+                if "right" in dirnames:
+                    dirnames.remove("right")
+                if "posix" in dirnames:
+                    dirnames.remove("posix")
+
+            for file in files:
+                fpath = os.path.join(root, file)
+
+                key = os.path.relpath(fpath, start=tz_root)
+                if os.sep != "/":  # pragma: nocover
+                    key = key.replace(os.sep, "/")
+
+                if not key or key in valid_zones:
+                    continue
+
+                if valid_key(fpath):
+                    valid_zones.add(key)
+
+    if "posixrules" in valid_zones:
+        # posixrules is a special symlink-only time zone where it exists, it
+        # should not be included in the output
+        valid_zones.remove("posixrules")
+
+    return valid_zones
+
+
+class InvalidTZPathWarning(RuntimeWarning):
+    """Warning raised if an invalid path is specified in PYTHONTZPATH."""
+
+
+TZPATH = ()
+_reset_tzpath(stacklevel=5)
diff --git a/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_zoneinfo.py b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_zoneinfo.py
new file mode 100644
index 0000000000000000000000000000000000000000..7063eb6a9025ac25e0266174ca1fb72774f446b0
--- /dev/null
+++ b/micromamba_root/pkgs/https/conda.anaconda.org/conda-forge/win-64/python-3.14.4-h4b44e0e_100_cp314/Lib/zoneinfo/_zoneinfo.py
@@ -0,0 +1,776 @@
+import bisect
+import calendar
+import collections
+import functools
+import re
+import weakref
+from datetime import datetime, timedelta, tzinfo
+
+from . import _common, _tzpath
+
+EPOCH = datetime(1970, 1, 1)
+EPOCHORDINAL = datetime(1970, 1, 1).toordinal()
+
+# It is relatively expensive to construct new timedelta objects, and in most
+# cases we're looking at the same deltas, like integer numbers of hours, etc.
+# To improve speed and memory use, we'll keep a dictionary with references
+# to the ones we've already used so far.
+#
+# Loading every time zone in the 2020a version of the time zone database
+# requires 447 timedeltas, which requires approximately the amount of space
+# that ZoneInfo("America/New_York") with 236 transitions takes up, so we will
+# set the cache size to 512 so that in the common case we always get cache
+# hits, but specifically crafted ZoneInfo objects don't leak arbitrary amounts
+# of memory.
+@functools.lru_cache(maxsize=512)
+def _load_timedelta(seconds):
+    return timedelta(seconds=seconds)
+
+
+class ZoneInfo(tzinfo):
+    _strong_cache_size = 8
+    _strong_cache = collections.OrderedDict()
+    _weak_cache = weakref.WeakValueDictionary()
+    __module__ = "zoneinfo"
+
+    def __init_subclass__(cls):
+        cls._strong_cache = collections.OrderedDict()
+        cls._weak_cache = weakref.WeakValueDictionary()
+
+    def __new__(cls, key):
+        instance = cls._weak_cache.get(key, None)
+        if instance is None:
+            instance = cls._weak_cache.setdefault(key, cls._new_instance(key))
+            instance._from_cache = True
+
+        # Update the "strong" cache
+        cls._strong_cache[key] = cls._strong_cache.pop(key, instance)
+
+        if len(cls._strong_cache) > cls._strong_cache_size:
+            try:
+                cls._strong_cache.popitem(last=False)
+            except KeyError:
+                # another thread may have already emptied the cache
+                pass
+
+        return instance
+
+    @classmethod
+    def no_cache(cls, key):
+        obj = cls._new_instance(key)
+        obj._from_cache = False
+
+        return obj
+
+    @classmethod
+    def _new_instance(cls, key):
+        obj = super().__new__(cls)
+        obj._key = key
+        obj._file_path = obj._find_tzfile(key)
+
+        if obj._file_path is not None:
+            file_obj = open(obj._file_path, "rb")
+        else:
+            file_obj = _common.load_tzdata(key)
+
+        with file_obj as f:
+            obj._load_file(f)
+
+        return obj
+
+    @classmethod
+    def from_file(cls, file_obj, /, key=None):
+        obj = super().__new__(cls)
+        obj._key = key
+        obj._file_path = None
+        obj._load_file(file_obj)
+        obj._file_repr = repr(file_obj)
+
+        # Disable pickling for objects created from files
+        obj.__reduce__ = obj._file_reduce
+
+        return obj
+
+    @classmethod
+    def clear_cache(cls, *, only_keys=None):
+        if only_keys is not None:
+            for key in only_keys:
+                cls._weak_cache.pop(key, None)
+                cls._strong_cache.pop(key, None)
+
+        else:
+            cls._weak_cache.clear()
+            cls._strong_cache.clear()
+
+    @property
+    def key(self):
+        return self._key
+
+    def utcoffset(self, dt):
+        return self._find_trans(dt).utcoff
+
+    def dst(self, dt):
+        return self._find_trans(dt).dstoff
+
+    def tzname(self, dt):
+        return self._find_trans(dt).tzname
+
+    def fromutc(self, dt):
+        """Convert from datetime in UTC to datetime in local time"""
+
+        if not isinstance(dt, datetime):
+            raise TypeError("fromutc() requires a datetime argument")
+        if dt.tzinfo is not self:
+            raise ValueError("dt.tzinfo is not self")
+
+        timestamp = self._get_local_timestamp(dt)
+        num_trans = len(self._trans_utc)
+
+        if num_trans >= 1 and timestamp < self._trans_utc[0]:
+            tti = self._tti_before
+            fold = 0
+        elif (
+            num_trans == 0 or timestamp > self._trans_utc[-1]
+        ) and not isinstance(self._tz_after, _ttinfo):
+            tti, fold = self._tz_after.get_trans_info_fromutc(
+                timestamp, dt.year
+            )
+        elif num_trans == 0:
+            tti = self._tz_after
+            fold = 0
+        else:
+            idx = bisect.bisect_right(self._trans_utc, timestamp)
+
+            if num_trans > 1 and timestamp >= self._trans_utc[1]:
+                tti_prev, tti = self._ttinfos[idx - 2 : idx]
+            elif timestamp > self._trans_utc[-1]:
+                tti_prev = self._ttinfos[-1]
+                tti = self._tz_after
+            else:
+                tti_prev = self._tti_before
+                tti = self._ttinfos[0]
+
+            # Detect fold
+            shift = tti_prev.utcoff - tti.utcoff
+            fold = shift.total_seconds() > timestamp - self._trans_utc[idx - 1]
+        dt += tti.utcoff
+        if fold:
+            return dt.replace(fold=1)
+        else:
+            return dt
+
+    def _find_trans(self, dt):
+        if dt is None:
+            if self._fixed_offset:
+                return self._tz_after
+            else:
+                return _NO_TTINFO
+
+        ts = self._get_local_timestamp(dt)
+
+        lt = self._trans_local[dt.fold]
+
+        num_trans = len(lt)
+
+        if num_trans and ts < lt[0]:
+            return self._tti_before
+        elif not num_trans or ts > lt[-1]:
+            if isinstance(self._tz_after, _TZStr):
+                return self._tz_after.get_trans_info(ts, dt.year, dt.fold)
+            else:
+                return self._tz_after
+        else:
+            # idx is the transition that occurs after this timestamp, so we
+            # subtract off 1 to get the current ttinfo
+            idx = bisect.bisect_right(lt, ts) - 1
+            assert idx >= 0
+            return self._ttinfos[idx]
+
+    def _get_local_timestamp(self, dt):
+        return (
+            (dt.toordinal() - EPOCHORDINAL) * 86400
+            + dt.hour * 3600
+            + dt.minute * 60
+            + dt.second
+        )
+
+    def __str__(self):
+        if self._key is not None:
+            return f"{self._key}"
+        else:
+            return repr(self)
+
+    def __repr__(self):
+        if self._key is not None:
+            return f"{self.__class__.__name__}(key={self._key!r})"
+        else:
+            return f"{self.__class__.__name__}.from_file({self._file_repr})"
+
+    def __reduce__(self):
+        return (self.__class__._unpickle, (self._key, self._from_cache))
+
+    def _file_reduce(self):
+        import pickle
+
+        raise pickle.PicklingError(
+            "Cannot pickle a ZoneInfo file created from a file stream."
+        )
+
+    @classmethod
+    def _unpickle(cls, key, from_cache, /):
+        if from_cache:
+            return cls(key)
+        else:
+            return cls.no_cache(key)
+
+    def _find_tzfile(self, key):
+        return _tzpath.find_tzfile(key)
+
+    def _load_file(self, fobj):
+        # Retrieve all the data as it exists in the zoneinfo file
+        trans_idx, trans_utc, utcoff, isdst, abbr, tz_str = _common.load_data(
+            fobj
+        )
+
+        # Infer the DST offsets (needed for .dst()) from the data
+        dstoff = self._utcoff_to_dstoff(trans_idx, utcoff, isdst)
+
+        # Convert all the transition times (UTC) into "seconds since 1970-01-01 local time"
+        trans_local = self._ts_to_local(trans_idx, trans_utc, utcoff)
+
+        # Construct `_ttinfo` objects for each transition in the file
+        _ttinfo_list = [
+            _ttinfo(
+                _load_timedelta(utcoffset), _load_timedelta(dstoffset), tzname
+            )
+            for utcoffset, dstoffset, tzname in zip(utcoff, dstoff, abbr)
+        ]
+
+        self._trans_utc = trans_utc
+        self._trans_local = trans_local
+        self._ttinfos = [_ttinfo_list[idx] for idx in trans_idx]
+
+        # Find the first non-DST transition
+        for i in range(len(isdst)):
+            if not isdst[i]:
+                self._tti_before = _ttinfo_list[i]
+                break
+        else:
+            if self._ttinfos:
+                self._tti_before = self._ttinfos[0]
+            else:
+                self._tti_before = None
+
+        # Set the "fallback" time zone
+        if tz_str is not None and tz_str != b"":
+            self._tz_after = _parse_tz_str(tz_str.decode())
+        else:
+            if not self._ttinfos and not _ttinfo_list:
+                raise ValueError("No time zone information found.")
+
+            if self._ttinfos:
+                self._tz_after = self._ttinfos[-1]
+            else:
+                self._tz_after = _ttinfo_list[-1]
+
+        # Determine if this is a "fixed offset" zone, meaning that the output
+        # of the utcoffset, dst and tzname functions does not depend on the
+        # specific datetime passed.
+        #
+        # We make three simplifying assumptions here:
+        #
+        # 1. If _tz_after is not a _ttinfo, it has transitions that might
+        #    actually occur (it is possible to construct TZ strings that
+        #    specify STD and DST but no transitions ever occur, such as
+        #    AAA0BBB,0/0,J365/25).
+        # 2. If _ttinfo_list contains more than one _ttinfo object, the objects
+        #    represent different offsets.
+        # 3. _ttinfo_list contains no unused _ttinfos (in which case an
+        #    otherwise fixed-offset zone with extra _ttinfos defined may
+        #    appear to *not* be a fixed offset zone).
+        #
+        # Violations to these assumptions would be fairly exotic, and exotic
+        # zones should almost certainly not be used with datetime.time (the
+        # only thing that would be affected by this).
+        if len(_ttinfo_list) > 1 or not isinstance(self._tz_after, _ttinfo):
+            self._fixed_offset = False
+        elif not _ttinfo_list:
+            self._fixed_offset = True
+        else:
+            self._fixed_offset = _ttinfo_list[0] == self._tz_after
+
+    @staticmethod
+    def _utcoff_to_dstoff(trans_idx, utcoffsets, isdsts):
+        # Now we must transform our ttis and abbrs into `_ttinfo` objects,
+        # but there is an issue: .dst() must return a timedelta with the
+        # difference between utcoffset() and the "standard" offset, but
+        # the "base offset" and "DST offset" are not encoded in the file;
+        # we can infer what they are from the isdst flag, but it is not
+        # sufficient to just look at the last standard offset, because
+        # occasionally countries will shift both DST offset and base offset.
+
+        typecnt = len(isdsts)
+        dstoffs = [0] * typecnt  # Provisionally assign all to 0.
+        dst_cnt = sum(isdsts)
+        dst_found = 0
+
+        for i in range(1, len(trans_idx)):
+            if dst_cnt == dst_found:
+                break
+
+            idx = trans_idx[i]
+
+            dst = isdsts[idx]
+
+            # We're only going to look at daylight saving time
+            if not dst:
+                continue
+
+            # Skip any offsets that have already been assigned
+            if dstoffs[idx] != 0:
+                continue
+
+            dstoff = 0
+            utcoff = utcoffsets[idx]
+
+            comp_idx = trans_idx[i - 1]
+
+            if not isdsts[comp_idx]:
+                dstoff = utcoff - utcoffsets[comp_idx]
+
+            if not dstoff and idx < (typecnt - 1) and i + 1 < len(trans_idx):
+                comp_idx = trans_idx[i + 1]
+
+                # If the following transition is also DST and we couldn't
+                # find the DST offset by this point, we're going to have to
+                # skip it and hope this transition gets assigned later
+                if isdsts[comp_idx]:
+                    continue
+
+                dstoff = utcoff - utcoffsets[comp_idx]
+
+            if dstoff:
+                dst_found += 1
+                dstoffs[idx] = dstoff
+        else:
+            # If we didn't find a valid value for a given index, we'll end up
+            # with dstoff = 0 for something where `isdst=1`. This is obviously
+            # wrong - one hour will be a much better guess than 0
+            for idx in range(typecnt):
+                if not dstoffs[idx] and isdsts[idx]:
+                    dstoffs[idx] = 3600
+
+        return dstoffs
+
+    @staticmethod
+    def _ts_to_local(trans_idx, trans_list_utc, utcoffsets):
+        """Generate number of seconds since 1970 *in the local time*.
+
+        This is necessary to easily find the transition times in local time"""
+        if not trans_list_utc:
+            return [[], []]
+
+        # Start with the timestamps and modify in-place
+        trans_list_wall = [list(trans_list_utc), list(trans_list_utc)]
+
+        if len(utcoffsets) > 1:
+            offset_0 = utcoffsets[0]
+            offset_1 = utcoffsets[trans_idx[0]]
+            if offset_1 > offset_0:
+                offset_1, offset_0 = offset_0, offset_1
+        else:
+            offset_0 = offset_1 = utcoffsets[0]
+
+        trans_list_wall[0][0] += offset_0
+        trans_list_wall[1][0] += offset_1
+
+        for i in range(1, len(trans_idx)):
+            offset_0 = utcoffsets[trans_idx[i - 1]]
+            offset_1 = utcoffsets[trans_idx[i]]
+
+            if offset_1 > offset_0:
+                offset_1, offset_0 = offset_0, offset_1
+
+            trans_list_wall[0][i] += offset_0
+            trans_list_wall[1][i] += offset_1
+
+        return trans_list_wall
+
+
+class _ttinfo:
+    __slots__ = ["utcoff", "dstoff", "tzname"]
+
+    def __init__(self, utcoff, dstoff, tzname):
+        self.utcoff = utcoff
+        self.dstoff = dstoff
+        self.tzname = tzname
+
+    def __eq__(self, other):
+        return (
+            self.utcoff == other.utcoff
+            and self.dstoff == other.dstoff
+            and self.tzname == other.tzname
+        )
+
+    def __repr__(self):  # pragma: nocover
+        return (
+            f"{self.__class__.__name__}"
+            + f"({self.utcoff}, {self.dstoff}, {self.tzname})"
+        )
+
+
+_NO_TTINFO = _ttinfo(None, None, None)
+
+
+class _TZStr:
+    __slots__ = (
+        "std",
+        "dst",
+        "start",
+        "end",
+        "get_trans_info",
+        "get_trans_info_fromutc",
+        "dst_diff",
+    )
+
+    def __init__(
+        self, std_abbr, std_offset, dst_abbr, dst_offset, start=None, end=None
+    ):
+        self.dst_diff = dst_offset - std_offset
+        std_offset = _load_timedelta(std_offset)
+        self.std = _ttinfo(
+            utcoff=std_offset, dstoff=_load_timedelta(0), tzname=std_abbr
+        )
+
+        self.start = start
+        self.end = end
+
+        dst_offset = _load_timedelta(dst_offset)
+        delta = _load_timedelta(self.dst_diff)
+        self.dst = _ttinfo(utcoff=dst_offset, dstoff=delta, tzname=dst_abbr)
+
+        # These are assertions because the constructor should only be called
+        # by functions that would fail before passing start or end
+        assert start is not None, "No transition start specified"
+        assert end is not None, "No transition end specified"
+
+        self.get_trans_info = self._get_trans_info
+        self.get_trans_info_fromutc = self._get_trans_info_fromutc
+
+    def transitions(self, year):
+        start = self.start.year_to_epoch(year)
+        end = self.end.year_to_epoch(year)
+        return start, end
+
+    def _get_trans_info(self, ts, year, fold):
+        """Get the information about the current transition - tti"""
+        start, end = self.transitions(year)
+
+        # With fold = 0, the period (denominated in local time) with the
+        # smaller offset starts at the end of the gap and ends at the end of
+        # the fold; with fold = 1, it runs from the start of the gap to the
+        # beginning of the fold.
+        #
+        # So in order to determine the DST boundaries we need to know both
+        # the fold and whether DST is positive or negative (rare), and it
+        # turns out that this boils down to fold XOR is_positive.
+        if fold == (self.dst_diff >= 0):
+            end -= self.dst_diff
+        else:
+            start += self.dst_diff
+
+        if start < end:
+            isdst = start <= ts < end
+        else:
+            isdst = not (end <= ts < start)
+
+        return self.dst if isdst else self.std
+
+    def _get_trans_info_fromutc(self, ts, year):
+        start, end = self.transitions(year)
+        start -= self.std.utcoff.total_seconds()
+        end -= self.dst.utcoff.total_seconds()
+
+        if start < end:
+            isdst = start <= ts < end
+        else:
+            isdst = not (end <= ts < start)
+
+        # For positive DST, the ambiguous period is one dst_diff after the end
+        # of DST; for negative DST, the ambiguous period is one dst_diff before
+        # the start of DST.
+        if self.dst_diff > 0:
+            ambig_start = end
+            ambig_end = end + self.dst_diff
+        else:
+            ambig_start = start
+            ambig_end = start - self.dst_diff
+
+        fold = ambig_start <= ts < ambig_end
+
+        return (self.dst if isdst else self.std, fold)
+
+
+def _post_epoch_days_before_year(year):
+    """Get the number of days between 1970-01-01 and YEAR-01-01"""
+    y = year - 1
+    return y * 365 + y // 4 - y // 100 + y // 400 - EPOCHORDINAL
+
+
+class _DayOffset:
+    __slots__ = ["d", "julian", "hour", "minute", "second"]
+
+    def __init__(self, d, julian, hour=2, minute=0, second=0):
+        min_day = 0 + julian  # convert bool to int
+        if not min_day <= d <= 365:
+            raise ValueError(f"d must be in [{min_day}, 365], not: {d}")
+
+        self.d = d
+        self.julian = julian
+        self.hour = hour
+        self.minute = minute
+        self.second = second
+
+    def year_to_epoch(self, year):
+        days_before_year = _post_epoch_days_before_year(year)
+
+        d = self.d
+        if self.julian and d >= 59 and calendar.isleap(year):
+            d += 1
+
+        epoch = (days_before_year + d) * 86400
+        epoch += self.hour * 3600 + self.minute * 60 + self.second
+
+        return epoch
+
+
+class _CalendarOffset:
+    __slots__ = ["m", "w", "d", "hour", "minute", "second"]
+
+    _DAYS_BEFORE_MONTH = (
+        -1,
+        0,
+        31,
+        59,
+        90,
+        120,
+        151,
+        181,
+        212,
+        243,
+        273,
+        304,
+        334,
+    )
+
+    def __init__(self, m, w, d, hour=2, minute=0, second=0):
+        if not 1 <= m <= 12:
+            raise ValueError("m must be in [1, 12]")
+
+        if not 1 <= w <= 5:
+            raise ValueError("w must be in [1, 5]")
+
+        if not 0 <= d <= 6:
+            raise ValueError("d must be in [0, 6]")
+
+        self.m = m
+        self.w = w
+        self.d = d
+        self.hour = hour
+        self.minute = minute
+        self.second = second
+
+    @classmethod
+    def _ymd2ord(cls, year, month, day):
+        return (
+            _post_epoch_days_before_year(year)
+            + cls._DAYS_BEFORE_MONTH[month]
+            + (month > 2 and calendar.isleap(year))
+            + day
+        )
+
+    # TODO: These are not actually epoch dates as they are expressed in local time
+    def year_to_epoch(self, year):
+        """Calculates the datetime of the occurrence from the year"""
+        # We know year and month, we need to convert w, d into day of month
+        #
+        # Week 1 is the first week in which day `d` (where 0 = Sunday) appears.
+        # Week 5 represents the last occurrence of day `d`, so we need to know
+        # the range of the month.
+        first_day, days_in_month = calendar.monthrange(year, self.m)
+
+        # This equation seems magical, so I'll break it down:
+        # 1. calendar says 0 = Monday, POSIX says 0 = Sunday
+        #    so we need first_day + 1 to get 1 = Monday -> 7 = Sunday,
+        #    which is still equivalent because this math is mod 7
+        # 2. Get first day - desired day mod 7: -1 % 7 = 6, so we don't need
+        #    to do anything to adjust negative numbers.
+        # 3. Add 1 because month days are a 1-based index.
+        month_day = (self.d - (first_day + 1)) % 7 + 1
+
+        # Now use a 0-based index version of `w` to calculate the w-th
+        # occurrence of `d`
+        month_day += (self.w - 1) * 7
+
+        # month_day will only be > days_in_month if w was 5, and `w` means
+        # "last occurrence of `d`", so now we just check if we over-shot the
+        # end of the month and if so knock off 1 week.
+        if month_day > days_in_month:
+            month_day -= 7
+
+        ordinal = self._ymd2ord(year, self.m, month_day)
+        epoch = ordinal * 86400
+        epoch += self.hour * 3600 + self.minute * 60 + self.second
+        return epoch
+
+
+def _parse_tz_str(tz_str):
+    # The tz string has the format:
+    #
+    # std[offset[dst[offset],start[/time],end[/time]]]
+    #
+    # std and dst must be 3 or more characters long and must not contain
+    # a leading colon, embedded digits, commas, nor a plus or minus signs;
+    # The spaces between "std" and "offset" are only for display and are
+    # not actually present in the string.
+    #
+    # The format of the offset is ``[+|-]hh[:mm[:ss]]``
+
+    offset_str, *start_end_str = tz_str.split(",", 1)
+
+    parser_re = re.compile(
+        r"""
+        (?P<std>[^<0-9:.+-]+|<[a-zA-Z0-9+-]+>)
+        (?:
+            (?P<stdoff>[+-]?\d{1,3}(?::\d{2}(?::\d{2})?)?)
+            (?:
+                (?P<dst>[^0-9:.+-]+|<[a-zA-Z0-9+-]+>)
+                (?P<dstoff>[+-]?\d{1,3}(?::\d{2}(?::\d{2})?)?)?
+            )? # dst
+        )? # stdoff
+        """,
+        re.ASCII|re.VERBOSE
+    )
+
+    m = parser_re.fullmatch(offset_str)
+
+    if m is None:
+        raise ValueError(f"{tz_str} is not a valid TZ string")
+
+    std_abbr = m.group("std")
+    dst_abbr = m.group("dst")
+    dst_offset = None
+
+    std_abbr = std_abbr.strip("<>")
+
+    if dst_abbr:
+        dst_abbr = dst_abbr.strip("<>")
+
+    if std_offset := m.group("stdoff"):
+        try:
+            std_offset = _parse_tz_delta(std_offset)
+        except ValueError as e:
+            raise ValueError(f"Invalid STD offset in {tz_str}") from e
+    else:
+        std_offset = 0
+
+    if dst_abbr is not None:
+        if dst_offset := m.group("dstoff"):
+            try:
+                dst_offset = _parse_tz_delta(dst_offset)
+            except ValueError as e:
+                raise ValueError(f"Invalid DST offset in {tz_str}") from e
+        else:
+            dst_offset = std_offset + 3600
+
+        if not start_end_str:
+            raise ValueError(f"Missing transition rules: {tz_str}")
+
+        start_end_strs = start_end_str[0].split(",", 1)
+        try:
+            start, end = (_parse_dst_start_end(x) for x in start_end_strs)
+        except ValueError as e:
+            raise ValueError(f"Invalid TZ string: {tz_str}") from e
+
+        return _TZStr(std_abbr, std_offset, dst_abbr, dst_offset, start, end)
+    elif start_end_str:
+        raise ValueError(f"Transition rule present without DST: {tz_str}")
+    else:
+        # This is a static ttinfo, don't return _TZStr
+        return _ttinfo(
+            _load_timedelta(std_offset), _load_timedelta(0), std_abbr
+        )
+
+
+def _parse_dst_start_end(dststr):
+    date, *time = dststr.split("/", 1)
+    type = date[:1]
+    if type == "M":
+        n_is_julian = False
+        m = re.fullmatch(r"M(\d{1,2})\.(\d).(\d)", date, re.ASCII)
+        if m is None:
+            raise ValueError(f"Invalid dst start/end date: {dststr}")
+        date_offset = tuple(map(int, m.groups()))
+        offset = _CalendarOffset(*date_offset)
+    else:
+        if type == "J":
+            n_is_julian = True
+            date = date[1:]
+        else:
+            n_is_julian = False
+
+        doy = int(date)
+        offset = _DayOffset(doy, n_is_julian)
+
+    if time:
+        offset.hour, offset.minute, offset.second = _parse_transition_time(time[0])
+
+    return offset
+
+
+def _parse_transition_time(time_str):
+    match = re.fullmatch(
+        r"(?P<sign>[+-])?(?P<h>\d{1,3})(:(?P<m>\d{2})(:(?P<s>\d{2}))?)?",
+        time_str,
+        re.ASCII
+    )
+    if match is None:
+        raise ValueError(f"Invalid time: {time_str}")
+
+    h, m, s = (int(v or 0) for v in match.group("h", "m", "s"))
+
+    if h > 167:
+        raise ValueError(
+            f"Hour must be in [0, 167]: {time_str}"
+        )
+
+    if match.group("sign") == "-":
+        h, m, s = -h, -m, -s
+
+    return h, m, s
+
+
+def _parse_tz_delta(tz_delta):
+    match = re.fullmatch(
+        r"(?P<sign>[+-])?(?P<h>\d{1,3})(:(?P<m>\d{2})(:(?P<s>\d{2}))?)?",
+        tz_delta,
+        re.ASCII
+    )
+    # Anything passed to this function should already have hit an equivalent
+    # regular expression to find the section to parse.
+    assert match is not None, tz_delta
+
+    h, m, s = (int(v or 0) for v in match.group("h", "m", "s"))
+
+    total = h * 3600 + m * 60 + s
+
+    if h > 24:
+        raise ValueError(
+            f"Offset hours must be in [0, 24]: {tz_delta}"
+        )
+
+    # Yes, +5 maps to an offset of -5h
+    if match.group("sign") != "-":
+        total = -total
+
+    return total