Datasets:
Picking bins: ribs, inner channels, rim, label panel, grip ledge; steel bar on PB1-PB4
59a7a28 verified Download models/PB3/description.txt from danielrosehill/Modular-Storage-3D-Models: direct link, hf CLI and curl.
- Browser
- Download file 2.28 kB
-
https://huggingface.co/datasets/danielrosehill/Modular-Storage-3D-Models/resolve/main/models/PB3/description.txt
- Command line
-
hf download hf://datasets/danielrosehill/Modular-Storage-3D-Models/models/PB3/description.txt
-
curl -L -o description.txt https://huggingface.co/datasets/danielrosehill/Modular-Storage-3D-Models/resolve/main/models/PB3/description.txt
2.28 kB
| Open-front picking bin 200 x 145 x 130 mm | |
| PB3 | |
| A small open-front picking bin, the shelf-mounted parts bin found on pick faces, | |
| workshop racking and line-side supply trolleys everywhere. The front wall stands | |
| at roughly 40% of the back wall's height with the side walls sweeping down between | |
| them on a curve, so an operator can reach in and pick without lifting the bin off | |
| the shelf. | |
| The body is tapered, which lets empty bins nest into one another for storage and | |
| transport, and the base sits on an inset plinth so a loaded bin stacks squarely on | |
| the one below instead of sliding. A rolled lip runs around the front opening. | |
| Unlike the euro container family, open-front picking bins are not governed by a | |
| dimensional standard - sizes are manufacturer-specific. This is the small member | |
| of a typical stocked small/medium/large range, and the same moulding is available | |
| as PB1 (450 x 300 x 210 mm) and PB2 (295 x 205 x 160 mm). | |
| DIMENSIONS (external) | |
| Depth 200 mm | |
| Width 145 mm | |
| Height 130 mm | |
| STANDARD | |
| No dimensional standard governs this family; sizes are manufacturer-specific. These three are typical of the commonly stocked small/medium/large range. | |
| TYPICAL USE | |
| Built as a set-dressing and layout asset for warehouses, stockrooms, workshops, | |
| maintenance stores and factory scenes: pick-face and shelf fills, small-parts | |
| storage walls, WMS and inventory-system bin visualisation, facility and | |
| architectural walkthroughs, training and simulation environments, and product | |
| configurators. | |
| Modelled at true real-world scale with clean low-poly topology and a single flat | |
| base colour, so a wall of several hundred bins stays cheap to render and can be | |
| recoloured per bin class without touching the mesh. | |
| ASSET NOTES | |
| Format GLB (glTF 2.0 binary), single file, no external textures | |
| Scale metres, real world - a 600 mm crate is 0.600 units long | |
| Origin centre of the base, +Z up | |
| Geometry 1,488 triangles, 2,100 vertices | |
| Materials flat PBR base colours, no image maps | |
| File size 77.4 KB | |
| LICENCE | |
| CC Attribution 4.0 (CC BY 4.0) | |
| TAGS | |
| picking bin, parts bin, shelf bin, storage bin, open front bin, louvre bin, | |
| warehouse, workshop, stockroom, small parts, industrial, plastic bin, inventory, | |
| supply chain, lowpoly, pbr, gltf, glb | |