Datasets:
Picking bins: ribs, inner channels, rim, label panel, grip ledge; steel bar on PB1-PB4
59a7a28 verified Download models/PB4/description.txt from danielrosehill/Modular-Storage-3D-Models: direct link, hf CLI and curl.
- Browser
- Download file 2.19 kB
-
https://huggingface.co/datasets/danielrosehill/Modular-Storage-3D-Models/resolve/main/models/PB4/description.txt
- Command line
-
hf download hf://datasets/danielrosehill/Modular-Storage-3D-Models/models/PB4/description.txt
-
curl -L -o description.txt https://huggingface.co/datasets/danielrosehill/Modular-Storage-3D-Models/resolve/main/models/PB4/description.txt
2.19 kB
| Open-front picking bin 145 x 100 x 80 mm | |
| PB4 | |
| The smallest open-front picking bin in the Israeli range, the shelf-mounted parts | |
| bin used for screws, fittings and electronic components. The front wall stands at | |
| roughly 40% of the back wall's height with the side walls sweeping down between | |
| them on a curve, so an operator can reach in without lifting the bin off the | |
| shelf. | |
| The body is tapered, which lets empty bins nest into one another, and the base | |
| sits on an inset plinth so a loaded bin stacks squarely on the one below. A rolled | |
| lip runs around the front opening. | |
| Open-front picking bins are not governed by a dimensional standard - sizes are | |
| manufacturer-specific. This is the fourth and smallest size, alongside PB1 (450 x | |
| 300 x 210 mm), PB2 (295 x 205 x 160 mm) and PB3 (200 x 145 x 130 mm); dimensions | |
| are from madafim.co.il, which prints H x W x D in cm. | |
| DIMENSIONS (external) | |
| Depth 145 mm | |
| Width 100 mm | |
| Height 80 mm | |
| STANDARD | |
| No dimensional standard governs this family; sizes are manufacturer-specific. These three are typical of the commonly stocked small/medium/large range. | |
| TYPICAL USE | |
| Built as a set-dressing and layout asset for warehouses, stockrooms, workshops and | |
| factory scenes: pick-face and shelf fills, small-parts storage walls, WMS and | |
| inventory-system visualisation, facility and architectural walkthroughs, training | |
| and simulation environments, and product configurators. | |
| Modelled at true real-world scale with clean low-poly topology and a single flat | |
| base colour, so it instances cheaply in a wall of several hundred bins and can be | |
| recoloured without touching the mesh. | |
| ASSET NOTES | |
| Format GLB (glTF 2.0 binary), single file, no external textures | |
| Scale metres, real world - a 600 mm crate is 0.600 units long | |
| Origin centre of the base, +Z up | |
| Geometry 932 triangles, 1,497 vertices | |
| Materials flat PBR base colours, no image maps | |
| File size 55.3 KB | |
| LICENCE | |
| CC Attribution 4.0 (CC BY 4.0) | |
| TAGS | |
| picking bin, parts bin, shelf bin, storage bin, open front bin, small parts bin, | |
| warehouse, workshop, stockroom, small parts, industrial, plastic bin, inventory, | |
| supply chain, lowpoly, pbr, gltf, glb | |