# Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. import itertools import multiprocessing import os import random from typing import Dict, Iterable, List, Optional, Tuple, Union import librosa import matplotlib.pyplot as plt import numpy as np import soundfile as sf from numpy.random import default_rng from omegaconf import DictConfig, OmegaConf from scipy.signal import convolve from scipy.spatial.transform import Rotation from tqdm import tqdm from nemo.collections.asr.parts.preprocessing.segment import AudioSegment from nemo.collections.asr.parts.utils.manifest_utils import read_manifest, write_manifest from nemo.collections.audio.parts.utils.audio import db2mag, generate_approximate_noise_field, mag2db, pow2db, rms from nemo.utils import logging try: import pyroomacoustics as pra PRA = True except ImportError: PRA = False try: import h5py HAS_H5PY = True except ImportError: HAS_H5PY = False def check_angle(key: str, val: Union[float, Iterable[float]]) -> bool: """Check if the angle value is within the expected range. Input values are in degrees. Note: azimuth: angle between a projection on the horizontal (xy) plane and positive x axis. Increases counter-clockwise. Range: [-180, 180]. elevation: angle between a vector an its projection on the horizontal (xy) plane. Positive above, negative below, i.e., north=+90, south=-90. Range: [-90, 90] yaw: rotation around the z axis. Defined accoding to right-hand rule. Range: [-180, 180] pitch: rotation around the yʹ axis. Defined accoding to right-hand rule. Range: [-90, 90] roll: rotation around the xʺ axis. Defined accoding to right-hand rule. Range: [-180, 180] Args: key: angle type val: values in degrees Returns: True if all values are within the expected range. """ if np.isscalar(val): min_val = max_val = val else: min_val = min(val) max_val = max(val) if key == 'azimuth' and -180 <= min_val <= max_val <= 180: return True if key == 'elevation' and -90 <= min_val <= max_val <= 90: return True if key == 'yaw' and -180 <= min_val <= max_val <= 180: return True if key == 'pitch' and -90 <= min_val <= max_val <= 90: return True if key == 'roll' and -180 <= min_val <= max_val <= 180: return True raise ValueError(f'Invalid value for angle {key} = {val}') def wrap_to_180(angle: float) -> float: """Wrap an angle to range ±180 degrees. Args: angle: angle in degrees Returns: Angle in degrees wrapped to ±180 degrees. """ return angle - np.floor(angle / 360 + 1 / 2) * 360 class ArrayGeometry(object): """A class to simplify handling of array geometry. Supports translation and rotation of the array and calculation of spherical coordinates of a given point relative to the internal coordinate system of the array. Args: mic_positions: 3D coordinates, with shape (num_mics, 3) center: optional position of the center of the array. Defaults to the average of the coordinates. internal_cs: internal coordinate system for the array relative to the global coordinate system. Defaults to (x, y, z), and is rotated with the array. """ def __init__( self, mic_positions: Union[np.ndarray, List], center: Optional[np.ndarray] = None, internal_cs: Optional[np.ndarray] = None, ): if isinstance(mic_positions, Iterable): mic_positions = np.array(mic_positions) if not mic_positions.ndim == 2: raise ValueError( f'Expecting a 2D array specifying mic positions, but received {mic_positions.ndim}-dim array' ) if not mic_positions.shape[1] == 3: raise ValueError(f'Expecting 3D positions, but received {mic_positions.shape[1]}-dim positions') mic_positions_center = np.mean(mic_positions, axis=0) self.centered_positions = mic_positions - mic_positions_center self.center = mic_positions_center if center is None else center # Internal coordinate system if internal_cs is None: # Initially aligned with the global self.internal_cs = np.eye(3) else: self.internal_cs = internal_cs @property def num_mics(self): """Return the number of microphones for the current array.""" return self.centered_positions.shape[0] @property def positions(self): """Absolute positions of the microphones.""" return self.centered_positions + self.center @property def internal_positions(self): """Positions in the internal coordinate system.""" return np.matmul(self.centered_positions, self.internal_cs.T) @property def radius(self): """Radius of the array, relative to the center.""" return max(np.linalg.norm(self.centered_positions, axis=1)) @staticmethod def get_rotation(yaw: float = 0, pitch: float = 0, roll: float = 0) -> Rotation: """Get a Rotation object for given angles. All angles are defined according to the right-hand rule. Args: yaw: rotation around the z axis pitch: rotation around the yʹ axis roll: rotation around the xʺ axis Returns: A rotation object constructed using the provided angles. """ check_angle('yaw', yaw) check_angle('pitch', pitch) check_angle('roll', roll) return Rotation.from_euler('ZYX', [yaw, pitch, roll], degrees=True) def translate(self, to: np.ndarray): """Translate the array center to a new point. Translation does not change the centered positions or the internal coordinate system. Args: to: 3D point, shape (3,) """ self.center = to def rotate(self, yaw: float = 0, pitch: float = 0, roll: float = 0): """Apply rotation on the mic array. This rotates the centered microphone positions and the internal coordinate system, it doesn't change the center of the array. All angles are defined according to the right-hand rule. For example, this means that a positive pitch will result in a rotation from z to x axis, which will result in a reduced elevation with respect to the global horizontal plane. Args: yaw: rotation around the z axis pitch: rotation around the yʹ axis roll: rotation around the xʺ axis """ # construct rotation using TB angles rotation = self.get_rotation(yaw=yaw, pitch=pitch, roll=roll) # rotate centered positions self.centered_positions = rotation.apply(self.centered_positions) # apply the same transformation on the internal coordinate system self.internal_cs = rotation.apply(self.internal_cs) def new_rotated_array(self, yaw: float = 0, pitch: float = 0, roll: float = 0): """Create a new array by rotating this array. Args: yaw: rotation around the z axis pitch: rotation around the yʹ axis roll: rotation around the xʺ axis Returns: A new ArrayGeometry object constructed using the provided angles. """ new_array = ArrayGeometry(mic_positions=self.positions, center=self.center, internal_cs=self.internal_cs) new_array.rotate(yaw=yaw, pitch=pitch, roll=roll) return new_array def spherical_relative_to_array( self, point: np.ndarray, use_internal_cs: bool = True ) -> Tuple[float, float, float]: """Return spherical coordinates of a point relative to the internal coordinate system. Args: point: 3D coordinate, shape (3,) use_internal_cs: Calculate position relative to the internal coordinate system. If `False`, the positions will be calculated relative to the external coordinate system centered at `self.center`. Returns: A tuple (distance, azimuth, elevation) relative to the mic array. """ rel_position = point - self.center distance = np.linalg.norm(rel_position) if use_internal_cs: # transform from the absolute coordinate system to the internal coordinate system rel_position = np.matmul(self.internal_cs, rel_position) # get azimuth azimuth = np.arctan2(rel_position[1], rel_position[0]) / np.pi * 180 # get elevation elevation = np.arcsin(rel_position[2] / distance) / np.pi * 180 return distance, azimuth, elevation def __str__(self): with np.printoptions(precision=3, suppress=True): desc = f"{type(self)}:\ncenter =\n{self.center}\ncentered positions =\n{self.centered_positions}\nradius = \n{self.radius:.3}\nabsolute positions =\n{self.positions}\ninternal coordinate system =\n{self.internal_cs}\n\n" return desc def plot(self, elev=30, azim=-55, mic_size=25): """Plot microphone positions. Args: elev: elevation for the view of the plot azim: azimuth for the view of the plot mic_size: size of the microphone marker in the plot """ fig = plt.figure() ax = fig.add_subplot(projection='3d') # show mic positions for m in range(self.num_mics): # show mic ax.scatter( self.positions[m, 0], self.positions[m, 1], self.positions[m, 2], marker='o', c='black', s=mic_size, depthshade=False, ) # add label ax.text(self.positions[m, 0], self.positions[m, 1], self.positions[m, 2], str(m), c='red', zorder=10) # show the internal coordinate system ax.quiver( self.center[0], self.center[1], self.center[2], self.internal_cs[:, 0], self.internal_cs[:, 1], self.internal_cs[:, 2], length=self.radius, label='internal cs', normalize=False, linestyle=':', linewidth=1.0, ) for dim, label in enumerate(['x′', 'y′', 'z′']): label_pos = self.center + self.radius * self.internal_cs[dim] ax.text(label_pos[0], label_pos[1], label_pos[2], label, tuple(self.internal_cs[dim]), c='blue') try: # Unfortunately, equal aspect ratio has been added very recently to Axes3D ax.set_aspect('equal') except NotImplementedError: logging.warning('Equal aspect ratio not supported by Axes3D') # Set view ax.view_init(elev=elev, azim=azim) # Set reasonable limits for all axes, even for the case of an unequal aspect ratio ax.set_xlim([self.center[0] - self.radius, self.center[0] + self.radius]) ax.set_ylim([self.center[1] - self.radius, self.center[1] + self.radius]) ax.set_zlim([self.center[2] - self.radius, self.center[2] + self.radius]) ax.set_xlabel('x/m') ax.set_ylabel('y/m') ax.set_zlabel('z/m') ax.set_title('Microphone positions') ax.legend() plt.show() def convert_placement_to_range( placement: dict, room_dim: Iterable[float], object_radius: float = 0 ) -> List[List[float]]: """Given a placement dictionary, return ranges for each dimension. Args: placement: dictionary containing x, y, height, and min_to_wall room_dim: dimensions of the room, shape (3,) object_radius: radius of the object to be placed Returns List with a range of values for each dimensions. """ if not np.all(np.array(room_dim) > 0): raise ValueError(f'Room dimensions must be positive: {room_dim}') if object_radius < 0: raise ValueError(f'Object radius must be non-negative: {object_radius}') placement_range = [None] * 3 min_to_wall = placement.get('min_to_wall', 0) if min_to_wall < 0: raise ValueError(f'Min distance to wall must be positive: {min_to_wall}') for idx, key in enumerate(['x', 'y', 'height']): # Room dimension dim = room_dim[idx] # Construct the range val = placement.get(key) if val is None: # No constrained specified on the coordinate of the mic center min_val, max_val = 0, dim elif np.isscalar(val): min_val = max_val = val else: if len(val) != 2: raise ValueError(f'Invalid value for placement for dim {idx}/{key}: {str(placement)}') min_val, max_val = val # Make sure the array is not too close to a wall min_val = max(min_val, min_to_wall + object_radius) max_val = min(max_val, dim - min_to_wall - object_radius) if min_val > max_val or min(min_val, max_val) < 0: raise ValueError(f'Invalid range dim {idx}/{key}: min={min_val}, max={max_val}') placement_range[idx] = [min_val, max_val] return placement_range class RIRCorpusGenerator(object): """Creates a corpus of RIRs based on a defined configuration of rooms and microphone array. RIRs are generated using `generate` method. """ def __init__(self, cfg: DictConfig): """ Args: cfg: dictionary with parameters of the simulation """ logging.info("Initialize RIRCorpusGenerator") self._cfg = cfg self.check_cfg() @property def cfg(self): """Property holding the internal config of the object. Note: Changes to this config are not reflected in the state of the object. Please create a new model with the updated config. """ return self._cfg @property def sample_rate(self): return self._cfg.sample_rate @cfg.setter def cfg(self, cfg): """Property holding the internal config of the object. Note: Changes to this config are not reflected in the state of the object. Please create a new model with the updated config. """ self._cfg = cfg def check_cfg(self): """ Checks provided configuration to ensure it has the minimal required configuration the values are in a reasonable range. """ # sample rate sample_rate = self.cfg.get('sample_rate') if sample_rate is None: raise ValueError('Sample rate not provided.') elif sample_rate < 0: raise ValueError(f'Sample rate must to be positive: {sample_rate}') # room configuration room_cfg = self.cfg.get('room') if room_cfg is None: raise ValueError('Room configuration not provided') if room_cfg.get('num') is None: raise ValueError('Number of rooms per subset not provided') if room_cfg.get('dim') is None: raise ValueError('Room dimensions not provided') for idx, key in enumerate(['width', 'length', 'height']): dim = room_cfg.dim.get(key) if dim is None: # not provided raise ValueError(f'Room {key} needs to be a scalar or a range, currently it is None') elif np.isscalar(dim) and dim <= 0: # fixed dimension raise ValueError(f'A fixed dimension must be positive for {key}: {dim}') elif len(dim) != 2 or not 0 < dim[0] < dim[1]: # not a valid range raise ValueError(f'Range must be specified with two positive increasing elements for {key}: {dim}') rt60 = room_cfg.get('rt60') if rt60 is None: # not provided raise ValueError('RT60 needs to be a scalar or a range, currently it is None') elif np.isscalar(rt60) and rt60 <= 0: # fixed dimension raise ValueError(f'RT60 must be positive: {rt60}') elif len(rt60) != 2 or not 0 < rt60[0] < rt60[1]: # not a valid range raise ValueError(f'RT60 range must be specified with two positive increasing elements: {rt60}') # mic array mic_cfg = self.cfg.get('mic_array') if mic_cfg is None: raise ValueError('Mic configuration not provided') if mic_cfg.get('positions') == 'random': # Only num_mics and placement are required mic_cfg_keys = ['num_mics', 'placement'] else: mic_cfg_keys = ['positions', 'placement', 'orientation'] for key in mic_cfg_keys: if key not in mic_cfg: raise ValueError(f'Mic array {key} not provided') # source source_cfg = self.cfg.get('source') if source_cfg is None: raise ValueError('Source configuration not provided') if source_cfg.get('num') is None: raise ValueError('Number of sources per room not provided') elif source_cfg.num <= 0: raise ValueError(f'Number of sources must be positive: {source_cfg.num}') if 'placement' not in source_cfg: raise ValueError('Source placement dictionary not provided') # anechoic if self.cfg.get('anechoic') is None: raise ValueError('Anechoic configuratio not provided.') def generate_room_params(self) -> dict: """Generate randomized room parameters based on the provided configuration. """ # Prepare room sim parameters if not PRA: raise ImportError('pyroomacoustics is required for room simulation') room_cfg = self.cfg.room # Prepare rt60 if room_cfg.rt60 is None: raise ValueError('Room RT60 needs to be a scalar or a range, currently it is None') if np.isscalar(room_cfg.rt60): assert room_cfg.rt60 > 0, f'RT60 should be positive: {room_cfg.rt60}' rt60 = room_cfg.rt60 elif len(room_cfg.rt60) == 2: assert ( 0 < room_cfg.rt60[0] <= room_cfg.rt60[1] ), f'Expecting two non-decreasing values for RT60, received {room_cfg.rt60}' rt60 = self.random.uniform(low=room_cfg.rt60[0], high=room_cfg.rt60[1]) else: raise ValueError(f'Unexpected value for RT60: {room_cfg.rt60}') # Generate a room with random dimensions num_retries = self.cfg.get('num_retries', 20) for n in range(num_retries): # width, length, height room_dim = np.zeros(3) # prepare dimensions for idx, key in enumerate(['width', 'length', 'height']): # get configured dimension dim = room_cfg.dim[key] # set a value if dim is None: raise ValueError(f'Room {key} needs to be a scalar or a range, currently it is None') elif np.isscalar(dim): assert dim > 0, f'Dimension should be positive for {key}: {dim}' room_dim[idx] = dim elif len(dim) == 2: assert 0 < dim[0] <= dim[1], f'Expecting two non-decreasing values for {key}, received {dim}' # Reduce dimension if the previous attempt failed room_dim[idx] = self.random.uniform(low=dim[0], high=dim[1] - n * (dim[1] - dim[0]) / num_retries) else: raise ValueError(f'Unexpected value for {key}: {dim}') try: # Get parameters from size and RT60 room_absorption, room_max_order = pra.inverse_sabine(rt60, room_dim) break except Exception as e: logging.debug('Inverse sabine failed: %s', str(e)) # Inverse sabine may fail if the room is too large for the selected RT60. # Try again by generate a smaller room. room_absorption = room_max_order = None continue if room_absorption is None or room_max_order is None: raise RuntimeError(f'Evaluation of parameters failed for RT60 {rt60}s and room size {room_dim}.') # Return the required values room_params = { 'dim': room_dim, 'absorption': room_absorption, 'max_order': room_max_order, 'rt60_theoretical': rt60, 'anechoic_absorption': self.cfg.anechoic.absorption, 'anechoic_max_order': self.cfg.anechoic.max_order, 'sample_rate': self.cfg.sample_rate, } return room_params def generate_array(self, room_dim: Iterable[float]) -> ArrayGeometry: """Generate array placement for the current room and config. Args: room_dim: dimensions of the room, [width, length, height] Returns: Randomly placed microphone array. """ mic_cfg = self.cfg.mic_array if mic_cfg.positions == 'random': # Create a radom set of microphones num_mics = mic_cfg.num_mics mic_positions = [] # Each microphone is placed individually placement_range = convert_placement_to_range( placement=mic_cfg.placement, room_dim=room_dim, object_radius=0 ) # Randomize mic placement for m in range(num_mics): position_m = [None] * 3 for idx in range(3): position_m[idx] = self.random.uniform(low=placement_range[idx][0], high=placement_range[idx][1]) mic_positions.append(position_m) mic_array = ArrayGeometry(mic_positions) else: mic_array = ArrayGeometry(mic_cfg.positions) # Randomize center placement center = np.zeros(3) placement_range = convert_placement_to_range( placement=mic_cfg.placement, room_dim=room_dim, object_radius=mic_array.radius ) for idx in range(len(center)): center[idx] = self.random.uniform(low=placement_range[idx][0], high=placement_range[idx][1]) # Place the array at the configured center point mic_array.translate(to=center) # Randomize orientation orientation = dict() for key in ['yaw', 'roll', 'pitch']: # angle for current orientation angle = mic_cfg.orientation[key] if angle is None: raise ValueError(f'Mic array {key} should be a scalar or a range, currently it is set to None.') # check it's within the expected range check_angle(key, angle) if np.isscalar(angle): orientation[key] = angle elif len(angle) == 2: assert angle[0] <= angle[1], f"Expecting two non-decreasing values for {key}, received {angle}" # generate integer values, for easier bucketing, if necessary orientation[key] = self.random.uniform(low=angle[0], high=angle[1]) else: raise ValueError(f'Unexpected value for orientation {key}: {angle}') # Rotate the array to match the selected orientation mic_array.rotate(**orientation) return mic_array def generate_source_position(self, room_dim: Iterable[float]) -> List[List[float]]: """Generate position for all sources in a room. Args: room_dim: dimensions of a 3D shoebox room Returns: List of source positions, with each position characterized with a 3D coordinate """ source_cfg = self.cfg.source placement_range = convert_placement_to_range(placement=source_cfg.placement, room_dim=room_dim) source_position = [] for n in range(source_cfg.num): # generate a random point withing the range s_pos = [None] * 3 for idx in range(len(s_pos)): s_pos[idx] = self.random.uniform(low=placement_range[idx][0], high=placement_range[idx][1]) source_position.append(s_pos) return source_position def generate(self): """Generate RIR corpus. This method will prepare randomized examples based on the current configuration, run room simulations and save results to output_dir. """ logging.info("Generate RIR corpus") # Initialize self.random = default_rng(seed=self.cfg.random_seed) # Prepare output dir output_dir = self.cfg.output_dir if output_dir.endswith('.yaml'): output_dir = output_dir[:-5] # Create absolute path logging.info('Output dir set to: %s', output_dir) # Generate all cases for subset, num_rooms in self.cfg.room.num.items(): output_dir_subset = os.path.join(output_dir, subset) examples = [] if not os.path.exists(output_dir_subset): logging.info('Creating output directory: %s', output_dir_subset) os.makedirs(output_dir_subset) elif os.path.isdir(output_dir_subset) and len(os.listdir(output_dir_subset)) > 0: raise RuntimeError(f'Output directory {output_dir_subset} is not empty.') # Generate examples for n_room in range(num_rooms): # room info room_params = self.generate_room_params() # array placement mic_array = self.generate_array(room_params['dim']) # source placement source_position = self.generate_source_position(room_params['dim']) # file name for the file room_filepath = os.path.join(output_dir_subset, f'{subset}_room_{n_room:06d}.h5') # prepare example example = { 'room_params': room_params, 'mic_array': mic_array, 'source_position': source_position, 'room_filepath': room_filepath, } examples.append(example) # Simulation if (num_workers := self.cfg.get('num_workers')) is None: num_workers = os.cpu_count() - 1 if num_workers > 1: logging.info(f'Simulate using {num_workers} workers') with multiprocessing.Pool(processes=num_workers) as pool: metadata = list(tqdm(pool.imap(simulate_room_kwargs, examples), total=len(examples))) else: logging.info('Simulate using a single worker') metadata = [] for example in tqdm(examples, total=len(examples)): metadata.append(simulate_room(**example)) # Save manifest manifest_filepath = os.path.join(output_dir, f'{subset}_manifest.json') if os.path.exists(manifest_filepath) and os.path.isfile(manifest_filepath): raise RuntimeError(f'Manifest config file exists: {manifest_filepath}') # Make all paths in the manifest relative to the output dir for data in metadata: data['room_filepath'] = os.path.relpath(data['room_filepath'], start=output_dir) write_manifest(manifest_filepath, metadata) # Generate plots with information about generated data plot_filepath = os.path.join(output_dir, f'{subset}_info.png') if os.path.exists(plot_filepath) and os.path.isfile(plot_filepath): raise RuntimeError(f'Plot file exists: {plot_filepath}') plot_rir_manifest_info(manifest_filepath, plot_filepath=plot_filepath) # Save used configuration for reference config_filepath = os.path.join(output_dir, 'config.yaml') if os.path.exists(config_filepath) and os.path.isfile(config_filepath): raise RuntimeError(f'Output config file exists: {config_filepath}') OmegaConf.save(self.cfg, config_filepath, resolve=True) def simulate_room_kwargs(kwargs: dict) -> dict: """Wrapper around `simulate_room` to handle kwargs. `pool.map(simulate_room_kwargs, examples)` would be equivalent to `pool.starstarmap(simulate_room, examples)` if `starstarmap` would exist. Args: kwargs: kwargs that are forwarded to `simulate_room` Returns: Dictionary with metadata, see `simulate_room` """ return simulate_room(**kwargs) def simulate_room( room_params: dict, mic_array: ArrayGeometry, source_position: Iterable[Iterable[float]], room_filepath: str, ) -> dict: """Simulate room Args: room_params: parameters of the room to be simulated mic_array: defines positions of the microphones source_positions: positions for all sources to be simulated room_filepath: results are saved to this path Returns: Dictionary with metadata based on simulation setup and simulation results. Used to create the corresponding manifest file. """ # room with the selected parameters room_sim = pra.ShoeBox( room_params['dim'], fs=room_params['sample_rate'], materials=pra.Material(room_params['absorption']), max_order=room_params['max_order'], ) # same geometry for generating anechoic responses room_anechoic = pra.ShoeBox( room_params['dim'], fs=room_params['sample_rate'], materials=pra.Material(room_params['anechoic_absorption']), max_order=room_params['anechoic_max_order'], ) # Compute RIRs for room in [room_sim, room_anechoic]: # place the array room.add_microphone_array(mic_array.positions.T) # place the sources for s_pos in source_position: room.add_source(s_pos) # generate RIRs room.compute_rir() # Get metadata for sources source_distance = [] source_azimuth = [] source_elevation = [] for s_pos in source_position: distance, azimuth, elevation = mic_array.spherical_relative_to_array(s_pos) source_distance.append(distance) source_azimuth.append(azimuth) source_elevation.append(elevation) # RIRs rir_dataset = { 'rir': convert_rir_to_multichannel(room_sim.rir), 'anechoic': convert_rir_to_multichannel(room_anechoic.rir), } # Prepare metadata dict and return metadata = { 'room_filepath': room_filepath, 'sample_rate': room_params['sample_rate'], 'dim': room_params['dim'], 'rir_absorption': room_params['absorption'], 'rir_max_order': room_params['max_order'], 'rir_rt60_theory': room_sim.rt60_theory(), 'rir_rt60_measured': room_sim.measure_rt60().mean(axis=0), # average across mics for each source 'anechoic_rt60_theory': room_anechoic.rt60_theory(), 'anechoic_rt60_measured': room_anechoic.measure_rt60().mean(axis=0), # average across mics for each source 'anechoic_absorption': room_params['anechoic_absorption'], 'anechoic_max_order': room_params['anechoic_max_order'], 'mic_positions': mic_array.positions, 'mic_center': mic_array.center, 'source_position': source_position, 'source_distance': source_distance, 'source_azimuth': source_azimuth, 'source_elevation': source_elevation, 'num_sources': len(source_position), } # Save simulated RIR save_rir_simulation(room_filepath, rir_dataset, metadata) return convert_numpy_to_serializable(metadata) def save_rir_simulation(filepath: str, rir_dataset: Dict[str, List[np.array]], metadata: dict): """Save simulated RIRs and metadata. Args: filepath: Path to the file where the data will be saved. rir_dataset: Dictionary with RIR data. Each item is a set of multi-channel RIRs. metadata: Dictionary with related metadata. """ if not HAS_H5PY: raise ImportError("Install h5py to use save_rir_simulation") if os.path.exists(filepath): raise RuntimeError(f'Output file exists: {filepath}') num_sources = metadata['num_sources'] with h5py.File(filepath, 'w') as h5f: # Save RIRs, each RIR set in a separate group for rir_key, rir_value in rir_dataset.items(): if len(rir_value) != num_sources: raise ValueError( f'Each RIR dataset should have exactly {num_sources} elements. Current RIR {rir_key} has {len(rir_value)} elements' ) rir_group = h5f.create_group(rir_key) # RIRs for different sources are saved under [group]['idx'] for idx, rir in enumerate(rir_value): rir_group.create_dataset(f'{idx}', data=rir_value[idx]) # Save metadata metadata_group = h5f.create_group('metadata') for key, value in metadata.items(): metadata_group.create_dataset(key, data=value) def load_rir_simulation(filepath: str, source: int = 0, rir_key: str = 'rir') -> Tuple[np.ndarray, float]: """Load simulated RIRs and metadata. Args: filepath: Path to simulated RIR data source: Index of a source. rir_key: String to denote which RIR to load, if there are multiple available. Returns: Multichannel RIR as ndarray with shape (num_samples, num_channels) and scalar sample rate. """ if not HAS_H5PY: raise ImportError("Install h5py to use load_rir_simulation") with h5py.File(filepath, 'r') as h5f: # Load RIR rir = h5f[rir_key][f'{source}'][:] # Load metadata sample_rate = h5f['metadata']['sample_rate'][()] return rir, sample_rate def convert_numpy_to_serializable(data: Union[dict, float, np.ndarray]) -> Union[dict, float, np.ndarray]: """Convert all numpy estries to list. Can be used to preprocess data before writing to a JSON file. Args: data: Dictionary, array or scalar. Returns: The same structure, but converted to list if the input is np.ndarray, so `data` can be seralized. """ if isinstance(data, dict): for key, val in data.items(): data[key] = convert_numpy_to_serializable(val) elif isinstance(data, list): data = [convert_numpy_to_serializable(d) for d in data] elif isinstance(data, np.ndarray): data = data.tolist() elif isinstance(data, np.integer): data = int(data) elif isinstance(data, np.floating): data = float(data) elif isinstance(data, np.generic): data = data.item() return data def convert_rir_to_multichannel(rir: List[List[np.ndarray]]) -> List[np.ndarray]: """Convert RIR to a list of arrays. Args: rir: list of lists, each element is a single-channel RIR Returns: List of multichannel RIRs """ num_mics = len(rir) num_sources = len(rir[0]) mc_rir = [None] * num_sources for n_source in range(num_sources): rir_len = [len(rir[m][n_source]) for m in range(num_mics)] max_len = max(rir_len) mc_rir[n_source] = np.zeros((max_len, num_mics)) for n_mic, len_mic in enumerate(rir_len): mc_rir[n_source][:len_mic, n_mic] = rir[n_mic][n_source] return mc_rir def plot_rir_manifest_info(filepath: str, plot_filepath: str = None): """Plot distribution of parameters from manifest file. Args: filepath: path to a RIR corpus manifest file plot_filepath: path to save the plot at """ metadata = read_manifest(filepath) # source placement source_distance = [] source_azimuth = [] source_elevation = [] source_height = [] # room config rir_rt60_theory = [] rir_rt60_measured = [] anechoic_rt60_theory = [] anechoic_rt60_measured = [] # get the required data for data in metadata: # source config source_distance += data['source_distance'] source_azimuth += data['source_azimuth'] source_elevation += data['source_elevation'] source_height += [s_pos[2] for s_pos in data['source_position']] # room config rir_rt60_theory.append(data['rir_rt60_theory']) rir_rt60_measured += data['rir_rt60_measured'] anechoic_rt60_theory.append(data['anechoic_rt60_theory']) anechoic_rt60_measured += data['anechoic_rt60_measured'] # plot plt.figure(figsize=(12, 6)) plt.subplot(2, 4, 1) plt.hist(source_distance, label='distance') plt.xlabel('distance / m') plt.ylabel('# examples') plt.title('Source-to-array center distance') plt.subplot(2, 4, 2) plt.hist(source_azimuth, label='azimuth') plt.xlabel('azimuth / deg') plt.ylabel('# examples') plt.title('Source-to-array center azimuth') plt.subplot(2, 4, 3) plt.hist(source_elevation, label='elevation') plt.xlabel('elevation / deg') plt.ylabel('# examples') plt.title('Source-to-array center elevation') plt.subplot(2, 4, 4) plt.hist(source_height, label='source height') plt.xlabel('height / m') plt.ylabel('# examples') plt.title('Source height') plt.subplot(2, 4, 5) plt.hist(rir_rt60_theory, label='theory') plt.xlabel('RT60 / s') plt.ylabel('# examples') plt.title('RT60 theory') plt.subplot(2, 4, 6) plt.hist(rir_rt60_measured, label='measured') plt.xlabel('RT60 / s') plt.ylabel('# examples') plt.title('RT60 measured') plt.subplot(2, 4, 7) plt.hist(anechoic_rt60_theory, label='theory') plt.xlabel('RT60 / s') plt.ylabel('# examples') plt.title('RT60 theory (anechoic)') plt.subplot(2, 4, 8) plt.hist(anechoic_rt60_measured, label='measured') plt.xlabel('RT60 / s') plt.ylabel('# examples') plt.title('RT60 measured (anechoic)') for n in range(8): plt.subplot(2, 4, n + 1) plt.grid() plt.legend(loc='lower left') plt.tight_layout() if plot_filepath is not None: plt.savefig(plot_filepath) plt.close() logging.info('Plot saved at %s', plot_filepath) class RIRMixGenerator(object): """Creates a dataset of mixed signals at the microphone by combining target speech, background noise and interference. Correspnding signals are are generated and saved using the `generate` method. Input configuration is expexted to have the following structure ``` sample_rate: sample rate used for simulation room: subset: manifest for RIR data target: subset: manifest for target source data noise: subset: manifest for noise data interference: subset: manifest for interference data interference_probability: probability that interference is present max_num_interferers: max number of interferers, randomly selected between 0 and max mix: subset: num: number of examples to generate rsnr: range of RSNR rsir: range of RSIR ref_mic: reference microphone ref_mic_rms: desired RMS at ref_mic ``` """ def __init__(self, cfg: DictConfig): """ Instantiate a RIRMixGenerator object. Args: cfg: generator configuration defining data for room, target signal, noise, interference and mixture """ logging.info("Initialize RIRMixGenerator") self._cfg = cfg self.check_cfg() self.subsets = self.cfg.room.keys() logging.info('Initialized with %d subsets: %s', len(self.subsets), str(self.subsets)) # load manifests self.metadata = dict() for subset in self.subsets: subset_data = dict() logging.info('Loading data for %s', subset) for key in ['room', 'target', 'noise', 'interference']: try: subset_data[key] = read_manifest(self.cfg[key][subset]) logging.info('\t%-*s: \t%d files', 15, key, len(subset_data[key])) except Exception as e: subset_data[key] = None logging.info('\t%-*s: \t0 files', 15, key) logging.warning('\t\tManifest data not loaded. Exception: %s', str(e)) self.metadata[subset] = subset_data logging.info('Loaded all manifests') self.num_retries = self.cfg.get('num_retries', 5) @property def cfg(self): """Property holding the internal config of the object. Note: Changes to this config are not reflected in the state of the object. Please create a new model with the updated config. """ return self._cfg @property def sample_rate(self): return self._cfg.sample_rate @cfg.setter def cfg(self, cfg): """Property holding the internal config of the object. Note: Changes to this config are not reflected in the state of the object. Please create a new model with the updated config. """ self._cfg = cfg def check_cfg(self): """ Checks provided configuration to ensure it has the minimal required configuration the values are in a reasonable range. """ # sample rate sample_rate = self.cfg.get('sample_rate') if sample_rate is None: raise ValueError('Sample rate not provided.') elif sample_rate < 0: raise ValueError(f'Sample rate must be positive: {sample_rate}') # room configuration room_cfg = self.cfg.get('room') if not room_cfg: raise ValueError( 'Room configuration not provided. Expecting RIR manifests in format {subset: path_to_manifest}' ) # target configuration target_cfg = self.cfg.get('target') if not target_cfg: raise ValueError( 'Target configuration not provided. Expecting audio manifests in format {subset: path_to_manifest}' ) for key in ['azimuth', 'elevation', 'distance']: value = target_cfg.get(key) if value is None or np.isscalar(value): # no constraint or a fixed dimension is ok pass elif len(value) != 2 or not value[0] < value[1]: # not a valid range raise ValueError(f'Range must be specified with two positive increasing elements for {key}: {value}') # noise configuration noise_cfg = self.cfg.get('noise') if not noise_cfg: raise ValueError( 'Noise configuration not provided. Expecting audio manifests in format {subset: path_to_manifest}' ) # interference configuration interference_cfg = self.cfg.get('interference') if not interference_cfg: logging.info('Interference configuration not provided.') else: interference_probability = interference_cfg.get('interference_probability', 0) max_num_interferers = interference_cfg.get('max_num_interferers', 0) min_azimuth_to_target = interference_cfg.get('min_azimuth_to_target', 0) if interference_probability is not None: if interference_probability < 0: raise ValueError( f'Interference probability must be non-negative. Current value: {interference_probability}' ) elif interference_probability > 0: assert ( max_num_interferers is not None and max_num_interferers > 0 ), f'Max number of interferers must be positive. Current value: {max_num_interferers}' assert ( min_azimuth_to_target is not None and min_azimuth_to_target >= 0 ), 'Min azimuth to target must be non-negative' # mix configuration mix_cfg = self.cfg.get('mix') if not mix_cfg: raise ValueError('Mix configuration not provided. Expecting configuration for each subset.') if 'ref_mic' not in mix_cfg: raise ValueError('Reference microphone not defined.') if 'ref_mic_rms' not in mix_cfg: raise ValueError('Reference microphone RMS not defined.') def generate_target(self, subset: str) -> dict: """ Prepare a dictionary with target configuration. The output dictionary contains the following information ``` room_index: index of the selected room from the RIR corpus room_filepath: path to the room simulation file source: index of the selected source for the target rt60: reverberation time of the selected room num_mics: number of microphones azimuth: azimuth of the target source, relative to the microphone array elevation: elevation of the target source, relative to the microphone array distance: distance of the target source, relative to the microphone array audio_filepath: path to the audio file for the target source text: text for the target source audio signal, if available duration: duration of the target source audio signal ``` Args: subset: string denoting a subset which will be used to selected target audio and room parameters. Returns: Dictionary with target configuration, including room, source index, and audio information. """ # Utility function def select_target_source(room_metadata, room_indices): """Find a room and a source that satisfies the constraints.""" for room_index in room_indices: # Select room room_data = room_metadata[room_index] # Candidate sources sources = self.random.choice(room_data['num_sources'], size=self.num_retries, replace=False) # Select target source in this room for source in sources: # Check constraints constraints_met = [] for constraint in ['azimuth', 'elevation', 'distance']: if self.cfg.target.get(constraint) is not None: # Check that the selected source is in the range source_value = room_data[f'source_{constraint}'][source] if self.cfg.target[constraint][0] <= source_value <= self.cfg.target[constraint][1]: constraints_met.append(True) else: constraints_met.append(False) # No need to check the remaining constraints break # Check if a feasible source is found if all(constraints_met): # A feasible source has been found return source, room_index return None, None # Prepare room & source position room_metadata = self.metadata[subset]['room'] room_indices = self.random.choice(len(room_metadata), size=self.num_retries, replace=False) source, room_index = select_target_source(room_metadata, room_indices) if source is None: raise RuntimeError(f'Could not find a feasible source given target constraints {self.cfg.target}') room_data = room_metadata[room_index] # Optional: select subset of channels num_available_mics = len(room_data['mic_positions']) if 'mic_array' in self.cfg: num_mics = self.cfg.mic_array['num_mics'] mic_selection = self.cfg.mic_array['selection'] if mic_selection == 'random': logging.debug('Randomly selecting %d mics', num_mics) selected_mics = self.random.choice(num_available_mics, size=num_mics, replace=False) elif isinstance(mic_selection, Iterable): logging.debug('Using explicitly selected mics: %s', str(mic_selection)) assert ( 0 <= min(mic_selection) < num_available_mics ), f'Expecting mic_selection in range [0,{num_available_mics}), current value: {mic_selection}' selected_mics = np.array(mic_selection) else: raise ValueError(f'Unexpected value for mic_selection: {mic_selection}') else: logging.debug('Using all %d available mics', num_available_mics) num_mics = num_available_mics selected_mics = np.arange(num_mics) # Double-check the number of mics is as expected assert ( len(selected_mics) == num_mics ), f'Expecting {num_mics} mics, but received {len(selected_mics)} mics: {selected_mics}' logging.debug('Selected mics: %s', str(selected_mics)) # Calculate distance from the source to each microphone mic_positions = np.array(room_data['mic_positions'])[selected_mics] source_position = np.array(room_data['source_position'][source]) distance_source_to_mic = np.linalg.norm(mic_positions - source_position, axis=1) # Handle relative paths room_filepath = room_data['room_filepath'] if not os.path.isabs(room_filepath): manifest_dir = os.path.dirname(self.cfg.room[subset]) room_filepath = os.path.join(manifest_dir, room_filepath) target_cfg = { 'room_index': int(room_index), 'room_filepath': room_filepath, 'source': source, 'rt60': room_data['rir_rt60_measured'][source], 'selected_mics': selected_mics.tolist(), # Positions 'source_position': source_position.tolist(), 'mic_positions': mic_positions.tolist(), # Relative to center of the array 'azimuth': room_data['source_azimuth'][source], 'elevation': room_data['source_elevation'][source], 'distance': room_data['source_distance'][source], # Relative to mics 'distance_source_to_mic': distance_source_to_mic, } return target_cfg def generate_interference(self, subset: str, target_cfg: dict) -> List[dict]: """ Prepare a list of dictionaries with interference configuration. Args: subset: string denoting a subset which will be used to select interference audio. target_cfg: dictionary with target configuration. This is used to determine the minimal required duration for the noise signal. Returns: List of dictionary with interference configuration, including source index and audio information for one or more interference sources. """ if self.metadata[subset]['interference'] is None: # No interference to be configured return None # Configure interfering sources max_num_sources = self.cfg.interference.get('max_num_interferers', 0) interference_probability = self.cfg.interference.get('interference_probability', 0) if ( max_num_sources >= 1 and interference_probability > 0 and self.random.uniform(low=0.0, high=1.0) < interference_probability ): # interference present num_interferers = self.random.integers(low=1, high=max_num_sources + 1) else: # interference not present return None # Room setup: same room as target room_index = target_cfg['room_index'] room_data = self.metadata[subset]['room'][room_index] feasible_sources = list(range(room_data['num_sources'])) # target source is not eligible feasible_sources.remove(target_cfg['source']) # Constraints for interfering sources min_azimuth_to_target = self.cfg.interference.get('min_azimuth_to_target', 0) # Prepare interference configuration interference_cfg = [] for n in range(num_interferers): # Select a source source = None while len(feasible_sources) > 0 and source is None: # Select a potential source for the target source = self.random.choice(feasible_sources) feasible_sources.remove(source) # Check azimuth separation if min_azimuth_to_target > 0: source_azimuth = room_data['source_azimuth'][source] azimuth_diff = wrap_to_180(source_azimuth - target_cfg['azimuth']) if abs(azimuth_diff) < min_azimuth_to_target: # Try again source = None continue if source is None: logging.warning('Could not select a feasible interference source %d of %s', n, num_interferers) # Return what we have for now or None return interference_cfg if interference_cfg else None # Current source setup interfering_source = { 'source': source, 'selected_mics': target_cfg['selected_mics'], 'position': room_data['source_position'][source], 'azimuth': room_data['source_azimuth'][source], 'elevation': room_data['source_elevation'][source], 'distance': room_data['source_distance'][source], } # Done with interference for this source interference_cfg.append(interfering_source) return interference_cfg def generate_mix(self, subset: str, target_cfg: dict) -> dict: """Generate scaling parameters for mixing the target speech at the microphone, background noise and interference signal at the microphone. The output dictionary contains the following information ``` rsnr: reverberant signal-to-noise ratio rsir: reverberant signal-to-interference ratio ref_mic: reference microphone for calculating the metrics ref_mic_rms: RMS of the signal at the reference microphone ``` Args: subset: string denoting the subset of configuration target_cfg: dictionary with target configuration Returns: Dictionary containing configured RSNR, RSIR, ref_mic and RMS on ref_mic. """ mix_cfg = dict() for key in ['rsnr', 'rsir', 'ref_mic', 'ref_mic_rms', 'min_duration']: if key in self.cfg.mix[subset]: # Take the value from subset config value = self.cfg.mix[subset].get(key) else: # Take the global value value = self.cfg.mix.get(key) if value is None: mix_cfg[key] = None elif np.isscalar(value): mix_cfg[key] = value elif len(value) == 2: # Select from the given range, including the upper bound mix_cfg[key] = self.random.integers(low=value[0], high=value[1] + 1) else: # Select one of the multiple values mix_cfg[key] = self.random.choice(value) if mix_cfg['ref_mic'] == 'closest': # Select the closest mic as the reference mix_cfg['ref_mic'] = np.argmin(target_cfg['distance_source_to_mic']) # Configuration for saving individual components mix_cfg['save'] = OmegaConf.to_object(self.cfg.mix['save']) if 'save' in self.cfg.mix else {} return mix_cfg def generate(self): """Generate a corpus of microphone signals by mixing target, background noise and interference signals. This method will prepare randomized examples based on the current configuration, run simulations and save results to output_dir. """ logging.info('Generate mixed signals') # Initialize self.random = default_rng(seed=self.cfg.random_seed) # Prepare output dir output_dir = self.cfg.output_dir if output_dir.endswith('.yaml'): output_dir = output_dir[:-5] # Create absolute path logging.info('Output dir set to: %s', output_dir) # Generate all cases for subset in self.subsets: output_dir_subset = os.path.join(output_dir, subset) examples = [] if not os.path.exists(output_dir_subset): logging.info('Creating output directory: %s', output_dir_subset) os.makedirs(output_dir_subset) elif os.path.isdir(output_dir_subset) and len(os.listdir(output_dir_subset)) > 0: raise RuntimeError(f'Output directory {output_dir_subset} is not empty.') num_examples = self.cfg.mix[subset].num logging.info('Preparing %d examples for subset %s', num_examples, subset) # Generate examples for n_example in tqdm(range(num_examples), total=num_examples, desc=f'Preparing {subset}'): # prepare configuration target_cfg = self.generate_target(subset) interference_cfg = self.generate_interference(subset, target_cfg) mix_cfg = self.generate_mix(subset, target_cfg) # base file name base_output_filepath = os.path.join(output_dir_subset, f'{subset}_example_{n_example:09d}') # prepare example example = { 'sample_rate': self.sample_rate, 'target_cfg': target_cfg, 'interference_cfg': interference_cfg, 'mix_cfg': mix_cfg, 'base_output_filepath': base_output_filepath, } examples.append(example) # Audio data audio_metadata = { 'target': self.metadata[subset]['target'], 'target_dir': os.path.dirname(self.cfg.target[subset]), # manifest_dir 'noise': self.metadata[subset]['noise'], 'noise_dir': os.path.dirname(self.cfg.noise[subset]), # manifest_dir } if interference_cfg is not None: audio_metadata.update( { 'interference': self.metadata[subset]['interference'], 'interference_dir': os.path.dirname(self.cfg.interference[subset]), # manifest_dir } ) # Simulation if (num_workers := self.cfg.get('num_workers')) is None: num_workers = os.cpu_count() - 1 if num_workers is not None and num_workers > 1: logging.info(f'Simulate using {num_workers} workers') examples_and_audio_metadata = zip(examples, itertools.repeat(audio_metadata, len(examples))) with multiprocessing.Pool(processes=num_workers) as pool: metadata = list( tqdm( pool.imap(simulate_room_mix_helper, examples_and_audio_metadata), total=len(examples), desc=f'Simulating {subset}', ) ) else: logging.info('Simulate using a single worker') metadata = [] for example in tqdm(examples, total=len(examples), desc=f'Simulating {subset}'): metadata.append(simulate_room_mix(**example, audio_metadata=audio_metadata)) # Save manifest manifest_filepath = os.path.join(output_dir, f'{os.path.basename(output_dir)}_{subset}.json') if os.path.exists(manifest_filepath) and os.path.isfile(manifest_filepath): raise RuntimeError(f'Manifest config file exists: {manifest_filepath}') # Make all paths in the manifest relative to the output dir for data in tqdm(metadata, total=len(metadata), desc=f'Making filepaths relative {subset}'): for key, val in data.items(): if key.endswith('_filepath') and val is not None: data[key] = os.path.relpath(val, start=output_dir) write_manifest(manifest_filepath, metadata) # Generate plots with information about generated data plot_filepath = os.path.join(output_dir, f'{os.path.basename(output_dir)}_{subset}_info.png') if os.path.exists(plot_filepath) and os.path.isfile(plot_filepath): raise RuntimeError(f'Plot file exists: {plot_filepath}') plot_mix_manifest_info(manifest_filepath, plot_filepath=plot_filepath) # Save used configuration for reference config_filepath = os.path.join(output_dir, 'config.yaml') if os.path.exists(config_filepath) and os.path.isfile(config_filepath): raise RuntimeError(f'Output config file exists: {config_filepath}') OmegaConf.save(self.cfg, config_filepath, resolve=True) def convolve_rir(signal: np.ndarray, rir: np.ndarray) -> np.ndarray: """Convolve signal with a possibly multichannel IR in rir, i.e., calculate the following for each channel m: signal_m = rir_m \ast signal Args: signal: single-channel signal (samples,) rir: single- or multi-channel IR, (samples,) or (samples, channels) Returns: out: same length as signal, same number of channels as rir, shape (samples, channels) """ num_samples = len(signal) if rir.ndim == 1: # convolve and trim to length out = convolve(signal, rir)[:num_samples] elif rir.ndim == 2: num_channels = rir.shape[1] out = np.zeros((num_samples, num_channels)) for m in range(num_channels): out[:, m] = convolve(signal, rir[:, m])[:num_samples] else: raise RuntimeError(f'RIR with {rir.ndim} not supported') return out def calculate_drr(rir: np.ndarray, sample_rate: float, n_direct: List[int], n_0_ms=2.5) -> List[float]: """Calculate direct-to-reverberant ratio (DRR) from the measured RIR. Calculation is done as in eq. (3) from [1]. Args: rir: room impulse response, shape (num_samples, num_channels) sample_rate: sample rate for the impulse response n_direct: direct path delay n_0_ms: window around n_direct for calculating the direct path energy Returns: Calculated DRR for each channel of the input RIR. References: [1] Eaton et al, The ACE challenge: Corpus description and performance evaluation, WASPAA 2015 """ # Define a window around the direct path delay n_0 = int(n_0_ms * sample_rate / 1000) len_rir, num_channels = rir.shape drr = [None] * num_channels for m in range(num_channels): # Window around the direct path dir_start = max(n_direct[m] - n_0, 0) dir_end = n_direct[m] + n_0 # Power of the direct component pow_dir = np.sum(np.abs(rir[dir_start:dir_end, m]) ** 2) / len_rir # Power of the reverberant component pow_reverberant = (np.sum(np.abs(rir[0:dir_start, m]) ** 2) + np.sum(np.abs(rir[dir_end:, m]) ** 2)) / len_rir # DRR in dB drr[m] = pow2db(pow_dir / pow_reverberant) return drr def normalize_max(x: np.ndarray, max_db: float = 0, eps: float = 1e-16) -> np.ndarray: """Normalize max input value to max_db full scale (±1). Args: x: input signal max_db: desired max magnitude compared to full scale eps: small regularization constant Returns: Normalized signal with max absolute value max_db. """ max_val = db2mag(max_db) return max_val * x / (np.max(np.abs(x)) + eps) def simultaneously_active_rms( x: np.ndarray, y: np.ndarray, sample_rate: float, rms_threshold_db: float = -60, window_len_ms: float = 200, min_active_duration: float = 0.5, ) -> Tuple[float, float]: """Calculate RMS over segments where both input signals are active. Args: x: first input signal y: second input signal sample_rate: sample rate for input signals in Hz rms_threshold_db: threshold for determining activity of the signal, relative to max absolute value window_len_ms: window length in milliseconds, used for calculating segmental RMS min_active_duration: minimal duration of the active segments Returns: RMS value over active segments for x and y. """ if len(x) != len(y): raise RuntimeError(f'Expecting signals of same length: len(x)={len(x)}, len(y)={len(y)}') window_len = int(window_len_ms * sample_rate / 1000) rms_threshold = db2mag(rms_threshold_db) # linear scale x_normalized = normalize_max(x) y_normalized = normalize_max(y) x_active_power = y_active_power = active_len = 0 for start in range(0, len(x) - window_len, window_len): window = slice(start, start + window_len) # check activity on the scaled signal x_window_rms = rms(x_normalized[window]) y_window_rms = rms(y_normalized[window]) if x_window_rms > rms_threshold and y_window_rms > rms_threshold: # sum the power of the original non-scaled signal x_active_power += np.sum(np.abs(x[window]) ** 2) y_active_power += np.sum(np.abs(y[window]) ** 2) active_len += window_len if active_len < int(min_active_duration * sample_rate): raise RuntimeError( f'Signals are simultaneously active less than {min_active_duration} s: only {active_len/sample_rate} s' ) # normalize x_active_power /= active_len y_active_power /= active_len return np.sqrt(x_active_power), np.sqrt(y_active_power) def scaled_disturbance( signal: np.ndarray, disturbance: np.ndarray, sdr: float, sample_rate: float = None, ref_channel: int = 0, eps: float = 1e-16, ) -> np.ndarray: """ Args: signal: numpy array, shape (num_samples, num_channels) disturbance: numpy array, same shape as signal sdr: desired signal-to-disturbance ration sample_rate: sample rate of the input signals ref_channel: ref mic used to calculate RMS eps: regularization constant Returns: Scaled disturbance, so that signal-to-disturbance ratio at ref_channel is approximately equal to input SDR during simultaneously active segment of signal and disturbance. """ if signal.shape != disturbance.shape: raise ValueError(f'Signal and disturbance shapes do not match: {signal.shape} != {disturbance.shape}') # set scaling based on RMS at ref_mic signal_rms, disturbance_rms = simultaneously_active_rms( signal[:, ref_channel], disturbance[:, ref_channel], sample_rate=sample_rate ) disturbance_gain = db2mag(-sdr) * signal_rms / (disturbance_rms + eps) # scale disturbance scaled_disturbance = disturbance_gain * disturbance return scaled_disturbance def prepare_source_signal( signal_type: str, sample_rate: int, audio_data: List[dict], audio_dir: Optional[str] = None, min_duration: Optional[int] = None, ref_signal: Optional[np.ndarray] = None, mic_positions: Optional[np.ndarray] = None, num_retries: int = 10, ) -> tuple: """Prepare an audio signal for a source. Args: signal_type: 'point' or 'diffuse' sample_rate: Sampling rate for the signal audio_data: List of audio items, each is a dictionary with audio_filepath, duration, offset and optionally text audio_dir: Base directory for resolving paths, e.g., manifest basedir min_duration: Minimal duration to be loaded if ref_signal is not provided, in seconds ref_signal: Optional, used to determine the length of the signal mic_positions: Optional, used to prepare approximately diffuse signal num_retries: Number of retries when selecting the source files Returns: (audio_signal, metadata), where audio_signal is an ndarray and metadata is a dictionary with audio filepaths, durations and offsets """ if signal_type not in ['point', 'diffuse']: raise ValueError(f'Unexpected signal type {signal_type}.') if audio_data is None: # No data to load return None metadata = {} if ref_signal is None: audio_signal = None # load at least one sample if min_duration is not provided samples_to_load = int(min_duration * sample_rate) if min_duration is not None else 1 source_signals_metadata = {'audio_filepath': [], 'duration': [], 'offset': [], 'text': []} while samples_to_load > 0: # Select a random item and load the audio item = random.choice(audio_data) audio_filepath = item['audio_filepath'] if not os.path.isabs(audio_filepath) and audio_dir is not None: audio_filepath = os.path.join(audio_dir, audio_filepath) # Load audio check_min_sample_rate(audio_filepath, sample_rate) audio_segment = AudioSegment.from_file( audio_file=audio_filepath, target_sr=sample_rate, duration=item['duration'], offset=item.get('offset', 0), ) if signal_type == 'point': if audio_segment.num_channels > 1: raise RuntimeError( f'Expecting single-channel source signal, but received {audio_segment.num_channels}. File: {audio_filepath}' ) else: raise ValueError(f'Unexpected signal type {signal_type}.') source_signals_metadata['audio_filepath'].append(audio_filepath) source_signals_metadata['duration'].append(item['duration']) source_signals_metadata['duration'].append(item.get('offset', 0)) source_signals_metadata['text'].append(item.get('text')) # not perfect, since different files may have different distributions segment_samples = normalize_max(audio_segment.samples) # concatenate audio_signal = ( np.concatenate((audio_signal, segment_samples)) if audio_signal is not None else segment_samples ) # remaining samples samples_to_load -= len(segment_samples) # Finally, we need only the metadata for the complete signal metadata = { 'duration': sum(source_signals_metadata['duration']), 'offset': 0, } # Add text only if all source signals have text if all([isinstance(tt, str) for tt in source_signals_metadata['text']]): metadata['text'] = ' '.join(source_signals_metadata['text']) else: # Load a signal with total_len samples and ensure it has enough simultaneous activity/overlap with ref_signal # Concatenate multiple files if necessary total_len = len(ref_signal) for n in range(num_retries): audio_signal = None source_signals_metadata = {'audio_filepath': [], 'duration': [], 'offset': []} if signal_type == 'point': samples_to_load = total_len elif signal_type == 'diffuse': # Load longer signal so it can be reshaped into (samples, mics) and # used to generate approximately diffuse noise field num_mics = len(mic_positions) samples_to_load = num_mics * total_len while samples_to_load > 0: # Select an audio file item = random.choice(audio_data) audio_filepath = item['audio_filepath'] if not os.path.isabs(audio_filepath) and audio_dir is not None: audio_filepath = os.path.join(audio_dir, audio_filepath) # Load audio signal check_min_sample_rate(audio_filepath, sample_rate) if (max_offset := item['duration'] - np.ceil(samples_to_load / sample_rate)) > 0: # Load with a random offset if the example is longer than samples_to_load offset = random.uniform(0, max_offset) duration = -1 else: # Load the whole file offset, duration = 0, item['duration'] audio_segment = AudioSegment.from_file( audio_file=audio_filepath, target_sr=sample_rate, duration=duration, offset=offset ) # Prepare a single-channel signal if audio_segment.num_channels == 1: # Take all samples segment_samples = audio_segment.samples else: # Take a random channel selected_channel = random.choice(range(audio_segment.num_channels)) segment_samples = audio_segment.samples[:, selected_channel] source_signals_metadata['audio_filepath'].append(audio_filepath) source_signals_metadata['duration'].append(len(segment_samples) / sample_rate) source_signals_metadata['offset'].append(offset) # not perfect, since different files may have different distributions segment_samples = normalize_max(segment_samples) # concatenate audio_signal = ( np.concatenate((audio_signal, segment_samples)) if audio_signal is not None else segment_samples ) # remaining samples samples_to_load -= len(segment_samples) if signal_type == 'diffuse' and num_mics > 1: try: # Trim and reshape to num_mics to prepare num_mics source signals audio_signal = audio_signal[: num_mics * total_len].reshape(num_mics, -1).T # Make spherically diffuse noise audio_signal = generate_approximate_noise_field( mic_positions=np.array(mic_positions), noise_signal=audio_signal, sample_rate=sample_rate ) except Exception as e: logging.info('Failed to generate approximate noise field: %s', str(e)) logging.info('Try again.') # Try again audio_signal, source_signals_metadata = None, {} continue # Trim to length audio_signal = audio_signal[:total_len, ...] # Include the channel dimension if the reference includes it if ref_signal.ndim == 2 and audio_signal.ndim == 1: audio_signal = audio_signal[:, None] try: # Signal and ref_signal should be simultaneously active simultaneously_active_rms(ref_signal, audio_signal, sample_rate=sample_rate) # We have enough overlap break except Exception as e: # Signal and ref_signal are not overlapping, try again logging.info('Exception: %s', str(e)) logging.info('Signals are not overlapping, try again.') audio_signal, source_signals_metadata = None, {} continue if audio_signal is None: logging.warning('Audio signal not set: %s.', signal_type) metadata['source_signals'] = source_signals_metadata return audio_signal, metadata def check_min_sample_rate(filepath: str, sample_rate: float): """Make sure the file's sample rate is at least sample_rate. This will make sure that we have only downsampling if loading this file, while upsampling is not permitted. Args: filepath: path to a file sample_rate: desired sample rate """ file_sample_rate = librosa.get_samplerate(path=filepath) if file_sample_rate < sample_rate: raise RuntimeError( f'Sample rate ({file_sample_rate}) is lower than the desired sample rate ({sample_rate}). File: {filepath}.' ) def simulate_room_mix( sample_rate: int, target_cfg: dict, interference_cfg: dict, mix_cfg: dict, audio_metadata: dict, base_output_filepath: str, max_amplitude: float = 0.999, eps: float = 1e-16, ) -> dict: """Simulate mixture signal at the microphone, including target, noise and interference signals and mixed at specific RSNR and RSIR. Args: sample_rate: Sample rate for all signals target_cfg: Dictionary with configuration of the target. Includes room_filepath, source index, audio_filepath, duration noise_cfg: List of dictionaries, where each item includes audio_filepath, offset and duration. interference_cfg: List of dictionaries, where each item contains source index mix_cfg: Dictionary with the mixture configuration. Includes RSNR, RSIR, ref_mic and ref_mic_rms. audio_metadata: Dictionary with a list of files for target, noise and interference base_output_filepath: All output audio files will be saved with this prefix by adding a diffierent suffix for each component, e.g., _mic.wav. max_amplitude: Maximum amplitude of the mic signal, used to prevent clipping. eps: Small regularization constant. Returns: Dictionary with metadata based on the mixture setup and simulation results. This corresponds to a line of the output manifest file. """ # Local utilities def load_rir( room_filepath: str, source: int, selected_mics: list, sample_rate: float, rir_key: str = 'rir' ) -> np.ndarray: """Load a RIR and check that the sample rate is matching the desired sample rate Args: room_filepath: Path to a room simulation in an h5 file source: Index of the desired source sample_rate: Sample rate of the simulation rir_key: Key of the RIR to load from the simulation. Returns: Numpy array with shape (num_samples, num_channels) """ rir, rir_sample_rate = load_rir_simulation(room_filepath, source=source, rir_key=rir_key) if rir_sample_rate != sample_rate: raise RuntimeError( f'RIR sample rate ({sample_rate}) is not matching the expected sample rate ({sample_rate}). File: {room_filepath}' ) return rir[:, selected_mics] def get_early_rir( rir: np.ndarray, rir_anechoic: np.ndarray, sample_rate: int, early_duration: float = 0.050 ) -> np.ndarray: """Return only the early part of the RIR.""" early_len = int(early_duration * sample_rate) direct_path_delay = np.min(np.argmax(rir_anechoic, axis=0)) rir_early = rir.copy() rir_early[direct_path_delay + early_len :, :] = 0 return rir_early def save_audio( base_path: str, tag: str, audio_signal: Optional[np.ndarray], sample_rate: int, save: str = 'all', ref_mic: Optional[int] = None, format: str = 'wav', subtype: str = 'float', ): """Save audio signal and return filepath.""" if (audio_signal is None) or (not save): return None if save == 'ref_mic': # save only ref_mic audio_signal = audio_signal[:, ref_mic] audio_filepath = base_path + f'_{tag}.{format}' sf.write(audio_filepath, audio_signal, sample_rate, subtype) return audio_filepath # Target RIRs target_rir = load_rir( target_cfg['room_filepath'], source=target_cfg['source'], selected_mics=target_cfg['selected_mics'], sample_rate=sample_rate, ) target_rir_anechoic = load_rir( target_cfg['room_filepath'], source=target_cfg['source'], sample_rate=sample_rate, selected_mics=target_cfg['selected_mics'], rir_key='anechoic', ) target_rir_early = get_early_rir(rir=target_rir, rir_anechoic=target_rir_anechoic, sample_rate=sample_rate) # Target signals target_signal, target_metadata = prepare_source_signal( signal_type='point', sample_rate=sample_rate, audio_data=audio_metadata['target'], audio_dir=audio_metadata['target_dir'], min_duration=mix_cfg['min_duration'], ) source_signals_metadata = {'target': target_metadata['source_signals']} # Convolve target target_reverberant = convolve_rir(target_signal, target_rir) target_anechoic = convolve_rir(target_signal, target_rir_anechoic) target_early = convolve_rir(target_signal, target_rir_early) # Prepare noise signal noise, noise_metadata = prepare_source_signal( signal_type='diffuse', sample_rate=sample_rate, mic_positions=target_cfg['mic_positions'], audio_data=audio_metadata['noise'], audio_dir=audio_metadata['noise_dir'], ref_signal=target_reverberant, ) source_signals_metadata['noise'] = noise_metadata['source_signals'] # Prepare interference signal if interference_cfg is None: interference = None else: # Load interference signals interference = 0 source_signals_metadata['interference'] = [] for i_cfg in interference_cfg: # Load single-channel signal for directional interference i_signal, i_metadata = prepare_source_signal( signal_type='point', sample_rate=sample_rate, audio_data=audio_metadata['interference'], audio_dir=audio_metadata['interference_dir'], ref_signal=target_signal, ) source_signals_metadata['interference'].append(i_metadata['source_signals']) # Load RIR from the same room as the target, but a difference source i_rir = load_rir( target_cfg['room_filepath'], source=i_cfg['source'], selected_mics=i_cfg['selected_mics'], sample_rate=sample_rate, ) # Convolve interference i_reverberant = convolve_rir(i_signal, i_rir) # Sum interference += i_reverberant # Scale and add components of the signal mic = target_reverberant.copy() if noise is not None: noise = scaled_disturbance( signal=target_reverberant, disturbance=noise, sdr=mix_cfg['rsnr'], sample_rate=sample_rate, ref_channel=mix_cfg['ref_mic'], ) # Update mic signal mic += noise if interference is not None: interference = scaled_disturbance( signal=target_reverberant, disturbance=interference, sdr=mix_cfg['rsir'], sample_rate=sample_rate, ref_channel=mix_cfg['ref_mic'], ) # Update mic signal mic += interference # Set the final mic signal level mic_rms = rms(mic[:, mix_cfg['ref_mic']]) global_gain = db2mag(mix_cfg['ref_mic_rms']) / (mic_rms + eps) mic_max = np.max(np.abs(mic)) if (clipped_max := mic_max * global_gain) > max_amplitude: # Downscale the global gain to prevent clipping + adjust ref_mic_rms accordingly clipping_prevention_gain = max_amplitude / clipped_max global_gain *= clipping_prevention_gain mix_cfg['ref_mic_rms'] += mag2db(clipping_prevention_gain) logging.debug( 'Clipping prevented for example %s (protection gain: %.2f dB)', base_output_filepath, mag2db(clipping_prevention_gain), ) # save signals signals = { 'mic': mic, 'target_reverberant': target_reverberant, 'target_anechoic': target_anechoic, 'target_early': target_early, 'noise': noise, 'interference': interference, } metadata = {} for tag, signal in signals.items(): if signal is not None: # scale all signal components with the global gain signal = global_gain * signal audio_filepath = save_audio( base_path=base_output_filepath, tag=tag, audio_signal=signal, sample_rate=sample_rate, save=mix_cfg['save'].get(tag, 'all'), ref_mic=mix_cfg['ref_mic'], format=mix_cfg['save'].get('format', 'wav'), subtype=mix_cfg['save'].get('subtype', 'float'), ) if tag == 'mic': metadata['audio_filepath'] = audio_filepath else: metadata[tag + '_filepath'] = audio_filepath # Add metadata metadata.update( { 'text': target_metadata.get('text'), 'duration': target_metadata['duration'], 'target_cfg': target_cfg, 'interference_cfg': interference_cfg, 'mix_cfg': mix_cfg, 'ref_channel': mix_cfg.get('ref_mic'), 'rt60': target_cfg.get('rt60'), 'drr': calculate_drr(target_rir, sample_rate, n_direct=np.argmax(target_rir_anechoic, axis=0)), 'rsnr': None if noise is None else mix_cfg['rsnr'], 'rsir': None if interference is None else mix_cfg['rsir'], 'source_signals': source_signals_metadata, } ) return convert_numpy_to_serializable(metadata) def simulate_room_mix_helper(example_and_audio_metadata: tuple) -> dict: """Wrapper around `simulate_room_mix` for pool.imap. Args: args: example and audio_metadata that are forwarded to `simulate_room_mix` Returns: Dictionary with metadata, see `simulate_room_mix` """ example, audio_metadata = example_and_audio_metadata return simulate_room_mix(**example, audio_metadata=audio_metadata) def plot_mix_manifest_info(filepath: str, plot_filepath: str = None): """Plot distribution of parameters from the manifest file. Args: filepath: path to a RIR corpus manifest file plot_filepath: path to save the plot at """ metadata = read_manifest(filepath) # target info target_distance = [] target_azimuth = [] target_elevation = [] target_duration = [] # room config rt60 = [] drr = [] # noise rsnr = [] rsir = [] # get the required data for data in metadata: # target info target_distance.append(data['target_cfg']['distance']) target_azimuth.append(data['target_cfg']['azimuth']) target_elevation.append(data['target_cfg']['elevation']) target_duration.append(data['duration']) # room config rt60.append(data['rt60']) drr += data['drr'] # average DRR across all mics # noise if data['rsnr'] is not None: rsnr.append(data['rsnr']) if data['rsir'] is not None: rsir.append(data['rsir']) # plot plt.figure(figsize=(12, 6)) plt.subplot(2, 4, 1) plt.hist(target_distance, label='distance') plt.xlabel('distance / m') plt.ylabel('# examples') plt.title('Target-to-array distance') plt.subplot(2, 4, 2) plt.hist(target_azimuth, label='azimuth') plt.xlabel('azimuth / deg') plt.ylabel('# examples') plt.title('Target-to-array azimuth') plt.subplot(2, 4, 3) plt.hist(target_elevation, label='elevation') plt.xlabel('elevation / deg') plt.ylabel('# examples') plt.title('Target-to-array elevation') plt.subplot(2, 4, 4) plt.hist(target_duration, label='duration') plt.xlabel('time / s') plt.ylabel('# examples') plt.title('Target duration') plt.subplot(2, 4, 5) plt.hist(rt60, label='RT60') plt.xlabel('RT60 / s') plt.ylabel('# examples') plt.title('RT60') plt.subplot(2, 4, 6) plt.hist(drr, label='DRR') plt.xlabel('DRR / dB') plt.ylabel('# examples') plt.title('DRR [avg over mics]') if len(rsnr) > 0: plt.subplot(2, 4, 7) plt.hist(rsnr, label='RSNR') plt.xlabel('RSNR / dB') plt.ylabel('# examples') plt.title(f'RSNR [{100 * len(rsnr) / len(rt60):.0f}% ex]') if len(rsir): plt.subplot(2, 4, 8) plt.hist(rsir, label='RSIR') plt.xlabel('RSIR / dB') plt.ylabel('# examples') plt.title(f'RSIR [{100 * len(rsir) / len(rt60):.0f}% ex]') for n in range(8): plt.subplot(2, 4, n + 1) plt.grid() plt.legend(loc='lower left') plt.tight_layout() if plot_filepath is not None: plt.savefig(plot_filepath) plt.close() logging.info('Plot saved at %s', plot_filepath)