exponent/tinyc4 · Datasets at Hugging Face

text stringlengths 9 94.9k
As I have mention before WBS development can be viewed as the process of grouping all project elements into several major categories, normally referred to as Level One; each one of these categories will itself contain several subcategories, normally referred to as Level Two. Alternately, and more accurately, developing a WBS involves dividing the deliverable items until the project has been divided into manageable, discrete, and identifiable items requiring simple tasks to complete that, when combined, constitute the project deliverable.
Logically is to keep dividing the project until the elements cannot realistically be divided anymore and may vary from organization to organization or may even vary among project managers within the same organization.
Each level of detail contains not only organization specific, but they also are specific to the nature of the deliverables involved in each project. Similarly, the degree of detail at the lowest level of each branch must be in line with the size of the project and in conformance with the organization’s operational philosophies.
Ideally, there should be some uniformity and consistency in the WBS. To achieve this uniformity, all children of the same parent must be developed based on the same division basis.
Usual practice of WBS are using three division levels which are “Deliverables oriented (Structure or products, functional system, physical area and proof of capability)”, “Schedule oriented (normally referring to a task or activity and sequential/ phases)” and “Resource oriented (disciplines, administrative units and financial accounts)”.
So again, no matters how you do it by codes or groups fields or using the WBS field as long as you define the structure into manageable level and represent the project deliverable that will contribute to success of the project.
Most of my work is in building construction, so maybe the fact that I like codes better is biased by my work.
But if sometimes you need to see activities organized by floor; sometimes by trade; other time by trade within each floor, etc. There’s no way to do that except with codes.
Do other lines of work have the same need or is it enough for you to squeeze into a rigid WBS and limit reports and analisys to that single point of view?
what I believe it says is that progranmmes should be structured in such a way as to enable sorting in a logical and affective manner thus enabling the team to ascertain an accurate picture of the progress of the works and the elements that make up the works.
"for hard planning thinkers"?? they dont know how to use codes?
WBS show the heirarchy of Scope of work and deliverables.
WBS is the standard for PMI, PMP, Planning Professional.
It is very clear in PMI influence or way of project management in general and planning in particular way of managing project.
So for hard planning thinkers, WBS is the preference.
I think the need and importance of structure in a schedule is clear and proven. The point now is how.
I prefer primavera codes over WBS or outlines. Codes are much more flexible and let you organize activities in different ways to analize different aspects of a schedule. WBS an outlines are rigid.
Of course you can use both at the same time, but unless I´m forced by a client, I don´t use a WBS, but codes.
Its just a simple divide and conquer technique. It a way to go from general to specifics. Its like writing a book first you have the outline the going to the details and contents.In a way it helps in organizing a project and simplify the job of a planner.
Breakdown Structure - Work, Cost, Organization..whatever it is..It is important! I think nobody is using a one liner schedule!
Just to explain more on WBS. As I have said on the other thread (Work Breakdown Structure is a results-oriented family tree that captures all the work of a project in an organized way. It is often portrayed graphically as a hierarchical tree; however, it can also be a tabular list of "element" categories and tasks or the indented task list that appears in your Gantt chart schedule). Meaning it can be shown on a different approach or style as long as it became meaningful and useful to other member of project management. It defines as a level of schedule to make it more sensible and manageable. It is used to define the project objectives with sufficient detail information into more detail groups of scope or task. Some planner/ scheduler used activity codes as their WBS and others are just the first 1, 2, 3 or 4 character of their activities.
Proper schedules are using this technique according to their own methods so they can level their schedule to more manageable levels.
On my own view “schedule without the proper work breakdown structure is going nowhere or meaningless as its does not show the sensible picture of the project”.
Any serious program must have some kind of organization so it is usable for control.
WBS is one way, but theres also activity codes.
The more detail that you want to see (monitor), the more important the WBS. A formal and logical structure helps capture the project data (activity type, resourcing, costing, progress etc.) in the most appropriate "pigeon-hole".
Work 1: “Sunspot”, Sun and Reflection project in the main atrium’s roof light.
The atrium is the school’s central space,- a “maelstrom” of pupils that move around and up and down the various floors. The space is experienced as living and varied because of the changes in daylight and the seasons. “Sunspot” is a shape on the glass roof, inspired by gas explosions, and placed according to calculations of the sun’s movement. When the sun is shining, the spot will spiral down in the rotunda, all the way to the ground floor floor and then spiral back up again(in relation to the path of the sun).
It contributes to visualising the movement in this space, but at a completely different pace to the other users. Each day it with be slightly different from the preceding one.
The title of this project was originally its working title, but I decided to keep it. It is slightly humoristic and a bit pedagogical since what one sees through these objects is like being on the inside of a pair of eyes. One gets association of entering the mouth of a large fish or whale.
The work is made up of a Fresnel lens on the outside(towards the outside) making the world turn upside-down or distort faces close-up. A mirrored tube runs through the wall and that distorts even more, and on the inner walls are large circular surfaces that have ‘running’ lights around the edge and a changing circle of colour like an iris. On the inside there are also lenticular films that diffuse the view depending on how one moves through the vestibule.
LED-programming and technology delivered by Jarle Henriksen.
Traveling through Virginia to visit a close friend and family, I parked my car in Richmond. I heard of a great southern tradition that sounded delicious. I had to give it a try before venturing off on the road again to my next destination. Sally Bells Kitchen, opened 90 years ago in 1924. The establishment was founded by Sarah Cabell Jones and a business partner. Sarah and partner met at the Women’s Exchange, a former nationwide movement, intended to teach women skills and financial independence.
Sally Bells Kitchen is known for their delicious boxed lunches. Items such as potato salad, chicken salad, tuna salad, deviled eggs, cheese wafers and an array of cup cakes are made fresh from scratch daily. They sell thousands of sandwiches, cupcakes and hundreds of pounds of salads each year. This establishment is very welcoming, friendly and certainly has southern charm. The staff is just wonderful!
The OTR 1840 is a CWDM Fiber Optic to SDI transmitter and receiver combined in a compact self contained package. It is a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.
Each OTR 1840 CWDM tranceiver has an independant transmitter and receiver channel, which provides an effective solution for any SDI signal up to 1080p60 (3Gbit/s) while preserving full uncompressed quality. Select from 18 transmitter wavelengths for full CWDM compatibility (ITU-T G.694.2).
The OTR 1840 will auto-detect and re-clock any 270Mbit / 1.5Gbit and 3Gbit SDI source prior to conversion. The module is fully compatible with 3Gbit Level A and Level B formats.
T he popular YouTuber Lilly Singh who is more prominent as Superwoman is genuinely making marks. Apart from all the social work and impressive collaborations, Lilly has now released a music video. Although nobody was quite expecting it from her, the rap song is definitely on fire. But what makes this song grab attention worldwide is that she brought into light what Bollywood songs would look like if they were turned into a woke rap.
Choosing three songs from the industry, Superwoman gave them a whole new meaning and added her unique beats alongside it. Needless to say, this version highlights the blatant misogyny in the Bollywood music industry.
The internet just can not seem to get enough of Superwoman’s empowering reinterpretation of their favorite Bollywood songs. The YouTuber released her own music video titled If Bollywood Songs Were Rap, with a compilation of three different hit songs. However, she added her own touch to it, and did not just translate the lyrics. There is much more to hear as Lilly has touched upon topics like unrealistic beauty standards of women, mental health issues, bisexuality and so much more.
Lilly Singh has chosen three hit songs including Choli Ke Peeche Kya Hai, All Izz Well and Aankh Marey. Apparently, her new rap version is everything that Bollywood never tells you about. Or everything that the entertainment industry gets wrong about women. Superwoman has smashed stereotypes with this new touch. Plus, she completely slayed the rap game.
While sharing the song, Lilly claimed that she loves Bollywood and rap music. So, she decided to make an impact by turning her favorite ones into rap. But she wanted to do more so she added positive and empowering messages into them.
Lilly Singh aka Superwoman is a very popular YouTuber who has a massive following on the platform. She has ventured into various fields doing comic sketched, impressive collaborations including ones with Dwayne Johnson and Priyanka Chopra, and music videos. Apart from doing social work, she is now heading into Hollywood by getting her own late night show.
Geweldige plek in een geweldige locatie!
Are there any golf courses near by? And what are they called?
Cuanto cuest una habitacion doble por dos noches?
It is a beautiful home. A rose blooms in my garden now.
Thank you! I thought so, my Dad cooks with it.
Do you cook the curry for how many people?
Emergency situations at petrol filling stations are not so uncommon. And for that reason, motorists need to maintain their situational awareness using Think 6, Look 6 whenever they stop to refuel.
Below are just four recent examples of fires, explosions or spills which occurred at gasoline stations over the last few weeks. These nicely make the point that drivers need to be ever-vigilent for danger - particularly where hazardous substances are present.
+ The first example occured on August 19 at a petrol station in St. Augustine, Florida. A tanker truck was delivering 8,800 gallons of gasoline, when fuel overflowed and spilled to the ground before exploding. The driver of the tanker truck was seriously burned.
+ The second example happened on the 1st October when a fire broke out at the BP Garage on the A120 in Bradwell (UK) and completely destroyed the petrol station.
+ The third example occurred when a man fleeing from police crashed into a Chevron Petrol Station in Davie, Florida on 6th October. The crash led to an explosion which destroyed petrol pumps and three vehicles.
+ And in the most recent example, a driver cashed her car into a Route 18 gas station in Bridgewater (MA), severing the pump and causing a small amount of gas to spew from the ground. According to local police, the driver lost control of her vehicle because of wet conditions.
The National Academy of Engineering and the US National Research Council have released the interim report of the Committee on the Analysis of Causes of the Deepwater Horizon Explosion, Fire and Oil Spill.
The report includes preliminary findings and observations on various actions and decisions including well design, cementing operations, well monitoring and control actions, management oversight and general regulation.
The interim report is available by clicking here.
The commitee's final report is due for publication in June 2011.
Join us for crafts, egg hunt, music, candy, Bible Story, a snack and the Easter Bunny!
Celebrate the resurrection of Jesus with us at BOHBC!
Women of Joy, Pigeon Forge TN.
A fun event for kids ages 3 yr old through 5th grade, while parents enjoy a night out! Click here to register.
Youth Sunday! The service will be led by the youth. Also there will be lunch to follow of all youth and their immediate families. Click here to register.
Pensive CD - Deirdre Faith - Wishlist.
I love the band Pensive...this is their merch buying center. I like their CD's though.
Sometimes when I’m out at a bar I’ll order a whiskey sour, and I’m usually disappointed because despite the name, it’s not sour at all. Depending on the bar, it’s actually pretty sweet. So I’ll warn you right off the bat that my version of this drink actually lives up to the name. If you don’t like your drinks sour, just add some simple syrup to taste to sweeten it up. It’s a straightforward drink, but the blood orange adds a fun (and colorful!) twist. Blood oranges are only available for a couple of months, though, so get ’em while you can. If you miss the availability window, just substitute regular orange juice.
Add blood orange, lime juice, and rum to a glass with 3 ice cubes, stir to mix. Add simple syrup to taste.
These look (& sound amazing!) Pinning them to try…off to find some blood oranges!
Tammy, good luck finding the blood oranges! I’ve seen them at Trader Joes and Whole Foods lately.
Interesting. A sour with rum… I love the idea. Sounds dangerous though… rum goes down a little too easy.
PH21 Gallery as a new contemporary photography exhibition space was established in the Szkene Theatre at the Budapest University of Technology and Economics. The mission of the gallery is to provide group and solo exhibition opportunities for contemporary photographers. To this end we invite emerging and established photographers to participate in our regular calls for entries for solo and themed group exibitions.
Ph21 Gallery archives all photography exhibitions, allowing us to promote our exhibiting photographers to curators, collectors, and the viewing public.
Enjoy your family. Enjoy your friends.
Make lots of special memories.
I found that more often than not, I wanted to put my development environment inside of Docker, not just my running code. My editor has plugins that help me browse documentation and check my syntax, but none of that works without installing additional stuff, and Docker has made me quite averse to installing anything on my host system.
So, I started stringing together Docker commands to do what I wanted, and I grew frustrated at all the copy/paste, and thought: There’s gotta be a better way.
If you’re interested in how it does this, see the nitty gritty details.
Go to the releases page.
Make sure it’s executable and in your path.
--type go - select the default version (1.6) of the pre-configured Go image.
--type python --version 2.7 - select the 2.7 version of the pre-configure Python image.
Currently, go, clojure, and python are baked in. More will come.
create - Creates an environment.
connect - Connect to an environment.
destroy - Destroys an environment and its home directory.
rebuild - Rebuilds an environment, preserving the environment’s home directory.
run - Creates an environment and immediately connects to it.
start - Starts an environment.
stop - Stops an environment.
inspect - Shows details about an environment as a JSON dump.
list - Lists existing environments.
images - Lists base images or user specific images.
Ensure that the skegio/python:3.5 image is pulled.
Ensure that the skeg ssh key is present. If not, one is generated.
Build an image based on skegio/python:3.5 which includes a user matching the host user.
Start a container running sshd that mounts ~/skegs/myapp in as the user’s home directory and the current directory in as a subdirectory.
Do I have to use one of the pre-configured images?
Not at all. You can create your own image and use it by specifying the -i flag to skeg create or skeg run. For now, your image needs to be based on skegio/base (like nate/aws), but that will change as skeg gets more sophisticated.
Why does skeg run the container as a long running process and connect over SSH rather than only for the lifetime of a process?

As I have mention before WBS development can be viewed as the process of grouping all project elements into several major categories, normally referred to as Level One; each one of these categories will itself contain several subcategories, normally referred to as Level Two. Alternately, and more accurately, developing a WBS involves dividing the deliverable items until the project has been divided into manageable, discrete, and identifiable items requiring simple tasks to complete that, when combined, constitute the project deliverable.

Logically is to keep dividing the project until the elements cannot realistically be divided anymore and may vary from organization to organization or may even vary among project managers within the same organization.

Each level of detail contains not only organization specific, but they also are specific to the nature of the deliverables involved in each project. Similarly, the degree of detail at the lowest level of each branch must be in line with the size of the project and in conformance with the organization’s operational philosophies.

Ideally, there should be some uniformity and consistency in the WBS. To achieve this uniformity, all children of the same parent must be developed based on the same division basis.

Usual practice of WBS are using three division levels which are “Deliverables oriented (Structure or products, functional system, physical area and proof of capability)”, “Schedule oriented (normally referring to a task or activity and sequential/ phases)” and “Resource oriented (disciplines, administrative units and financial accounts)”.

So again, no matters how you do it by codes or groups fields or using the WBS field as long as you define the structure into manageable level and represent the project deliverable that will contribute to success of the project.

Most of my work is in building construction, so maybe the fact that I like codes better is biased by my work.

But if sometimes you need to see activities organized by floor; sometimes by trade; other time by trade within each floor, etc. There’s no way to do that except with codes.

Do other lines of work have the same need or is it enough for you to squeeze into a rigid WBS and limit reports and analisys to that single point of view?

what I believe it says is that progranmmes should be structured in such a way as to enable sorting in a logical and affective manner thus enabling the team to ascertain an accurate picture of the progress of the works and the elements that make up the works.

"for hard planning thinkers"?? they dont know how to use codes?

WBS show the heirarchy of Scope of work and deliverables.

WBS is the standard for PMI, PMP, Planning Professional.

It is very clear in PMI influence or way of project management in general and planning in particular way of managing project.

So for hard planning thinkers, WBS is the preference.

I think the need and importance of structure in a schedule is clear and proven. The point now is how.

I prefer primavera codes over WBS or outlines. Codes are much more flexible and let you organize activities in different ways to analize different aspects of a schedule. WBS an outlines are rigid.

Of course you can use both at the same time, but unless I´m forced by a client, I don´t use a WBS, but codes.

Its just a simple divide and conquer technique. It a way to go from general to specifics. Its like writing a book first you have the outline the going to the details and contents.In a way it helps in organizing a project and simplify the job of a planner.

Breakdown Structure - Work, Cost, Organization..whatever it is..It is important! I think nobody is using a one liner schedule!

Just to explain more on WBS. As I have said on the other thread (Work Breakdown Structure is a results-oriented family tree that captures all the work of a project in an organized way. It is often portrayed graphically as a hierarchical tree; however, it can also be a tabular list of "element" categories and tasks or the indented task list that appears in your Gantt chart schedule). Meaning it can be shown on a different approach or style as long as it became meaningful and useful to other member of project management. It defines as a level of schedule to make it more sensible and manageable. It is used to define the project objectives with sufficient detail information into more detail groups of scope or task. Some planner/ scheduler used activity codes as their WBS and others are just the first 1, 2, 3 or 4 character of their activities.

Proper schedules are using this technique according to their own methods so they can level their schedule to more manageable levels.

On my own view “schedule without the proper work breakdown structure is going nowhere or meaningless as its does not show the sensible picture of the project”.

Any serious program must have some kind of organization so it is usable for control.

WBS is one way, but theres also activity codes.

The more detail that you want to see (monitor), the more important the WBS. A formal and logical structure helps capture the project data (activity type, resourcing, costing, progress etc.) in the most appropriate "pigeon-hole".

Work 1: “Sunspot”, Sun and Reflection project in the main atrium’s roof light.

The atrium is the school’s central space,- a “maelstrom” of pupils that move around and up and down the various floors. The space is experienced as living and varied because of the changes in daylight and the seasons. “Sunspot” is a shape on the glass roof, inspired by gas explosions, and placed according to calculations of the sun’s movement. When the sun is shining, the spot will spiral down in the rotunda, all the way to the ground floor floor and then spiral back up again(in relation to the path of the sun).

It contributes to visualising the movement in this space, but at a completely different pace to the other users. Each day it with be slightly different from the preceding one.

The title of this project was originally its working title, but I decided to keep it. It is slightly humoristic and a bit pedagogical since what one sees through these objects is like being on the inside of a pair of eyes. One gets association of entering the mouth of a large fish or whale.

The work is made up of a Fresnel lens on the outside(towards the outside) making the world turn upside-down or distort faces close-up. A mirrored tube runs through the wall and that distorts even more, and on the inner walls are large circular surfaces that have ‘running’ lights around the edge and a changing circle of colour like an iris. On the inside there are also lenticular films that diffuse the view depending on how one moves through the vestibule.

LED-programming and technology delivered by Jarle Henriksen.

Traveling through Virginia to visit a close friend and family, I parked my car in Richmond. I heard of a great southern tradition that sounded delicious. I had to give it a try before venturing off on the road again to my next destination. Sally Bells Kitchen, opened 90 years ago in 1924. The establishment was founded by Sarah Cabell Jones and a business partner. Sarah and partner met at the Women’s Exchange, a former nationwide movement, intended to teach women skills and financial independence.

Sally Bells Kitchen is known for their delicious boxed lunches. Items such as potato salad, chicken salad, tuna salad, deviled eggs, cheese wafers and an array of cup cakes are made fresh from scratch daily. They sell thousands of sandwiches, cupcakes and hundreds of pounds of salads each year. This establishment is very welcoming, friendly and certainly has southern charm. The staff is just wonderful!

The OTR 1840 is a CWDM Fiber Optic to SDI transmitter and receiver combined in a compact self contained package. It is a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.

Each OTR 1840 CWDM tranceiver has an independant transmitter and receiver channel, which provides an effective solution for any SDI signal up to 1080p60 (3Gbit/s) while preserving full uncompressed quality. Select from 18 transmitter wavelengths for full CWDM compatibility (ITU-T G.694.2).

The OTR 1840 will auto-detect and re-clock any 270Mbit / 1.5Gbit and 3Gbit SDI source prior to conversion. The module is fully compatible with 3Gbit Level A and Level B formats.

T he popular YouTuber Lilly Singh who is more prominent as Superwoman is genuinely making marks. Apart from all the social work and impressive collaborations, Lilly has now released a music video. Although nobody was quite expecting it from her, the rap song is definitely on fire. But what makes this song grab attention worldwide is that she brought into light what Bollywood songs would look like if they were turned into a woke rap.

Choosing three songs from the industry, Superwoman gave them a whole new meaning and added her unique beats alongside it. Needless to say, this version highlights the blatant misogyny in the Bollywood music industry.

The internet just can not seem to get enough of Superwoman’s empowering reinterpretation of their favorite Bollywood songs. The YouTuber released her own music video titled If Bollywood Songs Were Rap, with a compilation of three different hit songs. However, she added her own touch to it, and did not just translate the lyrics. There is much more to hear as Lilly has touched upon topics like unrealistic beauty standards of women, mental health issues, bisexuality and so much more.

Lilly Singh has chosen three hit songs including Choli Ke Peeche Kya Hai, All Izz Well and Aankh Marey. Apparently, her new rap version is everything that Bollywood never tells you about. Or everything that the entertainment industry gets wrong about women. Superwoman has smashed stereotypes with this new touch. Plus, she completely slayed the rap game.

While sharing the song, Lilly claimed that she loves Bollywood and rap music. So, she decided to make an impact by turning her favorite ones into rap. But she wanted to do more so she added positive and empowering messages into them.

Lilly Singh aka Superwoman is a very popular YouTuber who has a massive following on the platform. She has ventured into various fields doing comic sketched, impressive collaborations including ones with Dwayne Johnson and Priyanka Chopra, and music videos. Apart from doing social work, she is now heading into Hollywood by getting her own late night show.

Geweldige plek in een geweldige locatie!

Are there any golf courses near by? And what are they called?

Cuanto cuest una habitacion doble por dos noches?

It is a beautiful home. A rose blooms in my garden now.

Thank you! I thought so, my Dad cooks with it.

Do you cook the curry for how many people?

Emergency situations at petrol filling stations are not so uncommon. And for that reason, motorists need to maintain their situational awareness using Think 6, Look 6 whenever they stop to refuel.

Below are just four recent examples of fires, explosions or spills which occurred at gasoline stations over the last few weeks. These nicely make the point that drivers need to be ever-vigilent for danger - particularly where hazardous substances are present.

+ The first example occured on August 19 at a petrol station in St. Augustine, Florida. A tanker truck was delivering 8,800 gallons of gasoline, when fuel overflowed and spilled to the ground before exploding. The driver of the tanker truck was seriously burned.

+ The second example happened on the 1st October when a fire broke out at the BP Garage on the A120 in Bradwell (UK) and completely destroyed the petrol station.

+ The third example occurred when a man fleeing from police crashed into a Chevron Petrol Station in Davie, Florida on 6th October. The crash led to an explosion which destroyed petrol pumps and three vehicles.

+ And in the most recent example, a driver cashed her car into a Route 18 gas station in Bridgewater (MA), severing the pump and causing a small amount of gas to spew from the ground. According to local police, the driver lost control of her vehicle because of wet conditions.

The National Academy of Engineering and the US National Research Council have released the interim report of the Committee on the Analysis of Causes of the Deepwater Horizon Explosion, Fire and Oil Spill.

The report includes preliminary findings and observations on various actions and decisions including well design, cementing operations, well monitoring and control actions, management oversight and general regulation.

The interim report is available by clicking here.

The commitee's final report is due for publication in June 2011.

Join us for crafts, egg hunt, music, candy, Bible Story, a snack and the Easter Bunny!

Celebrate the resurrection of Jesus with us at BOHBC!

Women of Joy, Pigeon Forge TN.

A fun event for kids ages 3 yr old through 5th grade, while parents enjoy a night out! Click here to register.

Youth Sunday! The service will be led by the youth. Also there will be lunch to follow of all youth and their immediate families. Click here to register.

Pensive CD - Deirdre Faith - Wishlist.

I love the band Pensive...this is their merch buying center. I like their CD's though.

Sometimes when I’m out at a bar I’ll order a whiskey sour, and I’m usually disappointed because despite the name, it’s not sour at all. Depending on the bar, it’s actually pretty sweet. So I’ll warn you right off the bat that my version of this drink actually lives up to the name. If you don’t like your drinks sour, just add some simple syrup to taste to sweeten it up. It’s a straightforward drink, but the blood orange adds a fun (and colorful!) twist. Blood oranges are only available for a couple of months, though, so get ’em while you can. If you miss the availability window, just substitute regular orange juice.

Add blood orange, lime juice, and rum to a glass with 3 ice cubes, stir to mix. Add simple syrup to taste.

These look (& sound amazing!) Pinning them to try…off to find some blood oranges!

Tammy, good luck finding the blood oranges! I’ve seen them at Trader Joes and Whole Foods lately.

Interesting. A sour with rum… I love the idea. Sounds dangerous though… rum goes down a little too easy.

PH21 Gallery as a new contemporary photography exhibition space was established in the Szkene Theatre at the Budapest University of Technology and Economics. The mission of the gallery is to provide group and solo exhibition opportunities for contemporary photographers. To this end we invite emerging and established photographers to participate in our regular calls for entries for solo and themed group exibitions.

Ph21 Gallery archives all photography exhibitions, allowing us to promote our exhibiting photographers to curators, collectors, and the viewing public.

Enjoy your family. Enjoy your friends.

Make lots of special memories.

I found that more often than not, I wanted to put my development environment inside of Docker, not just my running code. My editor has plugins that help me browse documentation and check my syntax, but none of that works without installing additional stuff, and Docker has made me quite averse to installing anything on my host system.

So, I started stringing together Docker commands to do what I wanted, and I grew frustrated at all the copy/paste, and thought: There’s gotta be a better way.

If you’re interested in how it does this, see the nitty gritty details.

Go to the releases page.

Make sure it’s executable and in your path.

--type go - select the default version (1.6) of the pre-configured Go image.

--type python --version 2.7 - select the 2.7 version of the pre-configure Python image.

Currently, go, clojure, and python are baked in. More will come.

create - Creates an environment.

connect - Connect to an environment.

destroy - Destroys an environment and its home directory.

rebuild - Rebuilds an environment, preserving the environment’s home directory.

run - Creates an environment and immediately connects to it.

start - Starts an environment.

stop - Stops an environment.

inspect - Shows details about an environment as a JSON dump.

list - Lists existing environments.

images - Lists base images or user specific images.

Ensure that the skegio/python:3.5 image is pulled.

Ensure that the skeg ssh key is present. If not, one is generated.

Build an image based on skegio/python:3.5 which includes a user matching the host user.

Start a container running sshd that mounts ~/skegs/myapp in as the user’s home directory and the current directory in as a subdirectory.

Do I have to use one of the pre-configured images?

Not at all. You can create your own image and use it by specifying the -i flag to skeg create or skeg run. For now, your image needs to be based on skegio/base (like nate/aws), but that will change as skeg gets more sophisticated.

Why does skeg run the container as a long running process and connect over SSH rather than only for the lifetime of a process?