Datasets:

huiyeon
/

config_network

+[
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set system host-name R1",
+        "output": "This device is called R1."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set system host-name R2",
+        "output": "This device is called R2."
+    },
+    {
+        "instruction": "Clarify the operation of this command.",
+        "input": "set interfaces ge-0/0/0 unit 0 family inet address 100.10.30.167/24",
+        "output": "Interface ge-0/0/0.0 has an IP address of 100.1.30.167/24."
+    },
+    {
+        "instruction": "What is the function of this command?",
+        "input": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.10.240/24",
+        "output": "Interface ge-0/0/1.0 has an IP address of 192.168.10.240/24."
+    },
+    {
+        "instruction": "What action does this command perform?",
+        "input": "set interfaces ge-0/0/2 unit 0 family inet address 192.168.20.240/24",
+        "output": "Interface ge-0/0/2.0 has an IP address of 192.168.20.240/24."
+    },
+    {
+        "instruction": "Clarify the operation of this command.",
+        "input": "set routing-instances Route1 instance-type forwarding",
+        "output": "The routing instance of Route 1 is of type forwarding."
+    },
+    {
+        "instruction": "Describe what this command is used for.",
+        "input": "set routing-instances Route2 instance-type forwarding",
+        "output": "The routing instance of Route 2 is of type forwarding."
+    },
+    {
+        "instruction": "What action does this command perform?",
+        "input": "set protocols ospf area 0.0.0.0 interface ge-0/0/2.0",
+        "output": "Interface ge-0/0/2.0 is included in ospf area 0.0.0.0. In this case, the interface ge-0/0/2.0 is participating in OSPF and is part of the backbone area (area 0.0.0.0), meaning that OSPF will exchange routing information for networks connected to this interface within that area."
+    },
+    {
+        "instruction": "What is the function of this command?",
+        "input": "set protocols ospf area 0.0.0.0 interface ge-0/0/4.0",
+        "output": "Interface ge-0/0/4.0 is included in ospf area 0.0.0.0. In this case, the interface ge-0/0/4.0 is participating in OSPF and is part of the backbone area (area 0.0.0.0), meaning that OSPF will exchange routing information for networks connected to this interface within that area."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set interfaces ge-0/0/3 unit 0 family inet filter output TEST_FILTER1",
+        "output": "The output filter named TEST_FILTER1 is applied to the interface ge-0/0/3.0. The output filter controls and filters the traffic being sent out of the  interface based on the rules defined in TEST_FILTER1. "
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set system host-name R8",
+        "output": "This device is called R8."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set protocols ospf area 0.0.0.0 interface ge-0/0/5.0",
+        "output": "Interface ge-0/0/5.0 is included in ospf area 0.0.0.0."
+    },
+    {
+        "instruction": "Describe what this command is used for.",
+        "input": "set interfaces lo0 unit 0 family inet address 10.0.0.1/32",
+        "output": "The loopback interface lo0.0 has an IP address of 10.0.0.1/32."
+    },
+    {
+        "instruction": "What action does this command perform?",
+        "input": "set interfaces ge-0/0/1 unit 0 family inet filter input AdminAccess",
+        "output": "The input filter named AdminAccess is applied to the interface ge-0/0/1.0."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set system time-zone UTC",
+        "output": "The system time-zone is set to UTC."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set firewall family inet filter MyFilter term allow-ping then accept",
+        "output": "The firewall filter named MyFilter allows ping traffic (ICMP) and accepts it."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set interfaces ge-0/0/0 unit 0 family inet address 172.16.0.1/24",
+        "output": "Interface ge-0/0/0.0 has an IP address of 172.16.0.1/24."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set protocols ospf area 0.0.0.0 interface lo0.0",
+        "output": "The loopback interface lo0.0 is included in ospf area 0.0.0.0."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set system services ssh protocol-version v2",
+        "output": "SSH service is enabled using protocol version 2."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set routing-options static route 10.0.0.0/8 next-hop 192.168.1.1",
+        "output": "A static route to 10.0.0.0/8 is set with next-hop 192.168.1.1."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set system host-name R6",
+        "output": "This device is called R6."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set interfaces ge-0/0/0 unit 0 family inet address 10.0.1.2/24",
+        "output": "Interface ge-0/0/0.0 has an IP address of 10.0.1.2/24."
+    },
+    {
+        "instruction": "What is the function of this command?",
+        "input": "set interfaces ge-0/0/1 unit 0 family inet address 10.0.2.1/24",
+        "output": "Interface ge-0/0/1.0 has an IP address of 10.0.2.1/24."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set interfaces ge-0/0/2 unit 0 family inet address 10.0.3.1/24",
+        "output": "Interface ge-0/0/2.0 has an IP address of 10.0.3.1/24."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0",
+        "output": "Interface ge-0/0/1.0 is included in ospf area 0.0.0.0."
+    },
+    {
+        "instruction": "What action does this command perform?",
+        "input": "set system host-name R7",
+        "output": "This device is called R7."
+    },
+    {
+        "instruction": "Describe what this command is used for.",
+        "input": "set services nat rule NAT_TEST_RULE term LAB1 from source-address 192.168.11.10/32",
+        "output": "NAT rule is applied to match traffic from source address 192.168.11.10/32."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set services nat rule NAT_TEST_RULE term LAB1 then translated source-prefix 10.0.2.3/32",
+        "output": "The source address is translated to 10.0.2.3/32 as part of NAT rule NAT_TEST_RULE."
+    },
+    {
+        "instruction": "Describe what this command is used for.",
+        "input": "set services nat rule NAT_TEST_RULE term LAB1 then translated translation-type basic-nat44",
+        "output": "The translation type is basic NAT44 as specified by the NAT rule."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set system host-name R4",
+        "output": "This device is called R4."
+    },
+    {
+        "instruction": "What is the function of this command?",
+        "input": "set interfaces ge-0/0/0 unit 0 family inet address 192.168.30.242/24",
+        "output": "Interface ge-0/0/0.0 has an IP address of 192.168.30.242/24."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.31.1/24",
+        "output": "Interface ge-0/0/1.0 has an IP address of 192.168.31.1/24."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set interfaces ge-0/0/2 unit 0 family inet service input service-set NAT-SET",
+        "output": "The input service-set NAT-SET is applied to the interface ge-0/0/2.0."
+    },
+    {
+        "instruction": "What is the function of this command?",
+        "input": "set interfaces ge-0/0/2 unit 0 family inet address 192.168.32.1/24",
+        "output": "Interface ge-0/0/2.0 has an IP address of 192.168.32.1/24."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0",
+        "output": "Interface ge-0/0/1.0 is included in ospf area 0.0.0.0."
+    },
+    {
+        "instruction": "Explain the purpose of this command.",
+        "input": "set system time-zone Asia/Seoul",
+        "output": "The system time-zone is set to Asia/Seoul."
+    },
+    {
+        "instruction": "What does this command achieve?",
+        "input": "set interfaces lo0 unit 0 family inet filter input AdminHost-Acess",
+        "output": "The loopback interface lo0.0 has an input filter named AdminHost-Acess."
+    },
+    {
+        "instruction": "Clarify the operation of this command.",
+        "input": "set firewall family inet filter AdminHost-Acess term allow-ssh then accept",
+        "output": "The firewall filter allows SSH traffic from the source address."
+    },
+    {
+        "instruction": "Can you explain the use of this command?",
+        "input": "set firewall family inet filter AdminHost-Acess term default-deny then discard",
+        "output": "All traffic not matching the firewall rules will be discarded."
+    }
+]