| %% Parameters for Lithium-Ion Battery Pack cooling example | |
| % Battery cooling example setup and workspace variables | |
| % | |
| % Copyright 2021-2026 The MathWorks, Inc. | |
| % | |
| samplingTime=1; % Sampling time (s) | |
| ambient=300; % Ambient temperature in K | |
| coolantTemp=300; % Coolant inlet temperature in K | |
| initialPackSOC=0.9; % Pack intial SOC (-) | |
| % ------------------------------------------------------------------------- | |
| %% Cell Electrical | |
| T_vec=[278 293 313]; % Temperature vector T [K] | |
| AH=27.8; % Cell capacity AH [Ahr] | |
| SOC_vec=[0 0.1 0.25 0.5 0.75 0.9 1]; % Cell state of charge vector SOC [-] | |
| % | |
| V0_mat=[ | |
| 3.4966 3.5057 3.5148 | |
| 3.5519 3.5660 3.5653 | |
| 3.6183 3.6337 3.6402 | |
| 3.7066 3.7127 3.7213 | |
| 3.9131 3.9259 3.9376 | |
| 4.0748 4.0777 4.0821 | |
| 4.1923 4.1928 4.1930]; % [V] Em open-circuit voltage vs SOC rows and T columns | |
| R0_mat=[ | |
| 0.0117 0.0085 0.0090 | |
| 0.0110 0.0085 0.0090 | |
| 0.0114 0.0087 0.0092 | |
| 0.0107 0.0082 0.0088 | |
| 0.0107 0.0083 0.0091 | |
| 0.0113 0.0085 0.0089 | |
| 0.0116 0.0085 0.0089]; % [Ohm] R0 resistance vs SOC rows and T columns | |
| R1_mat=[ | |
| 0.0109 0.0029 0.0013 | |
| 0.0069 0.0024 0.0012 | |
| 0.0047 0.0026 0.0013 | |
| 0.0034 0.0016 0.0010 | |
| 0.0033 0.0023 0.0014 | |
| 0.0033 0.0018 0.0011 | |
| 0.0028 0.0017 0.0011]; % [Ohm] R1 Resistance vs SOC rows and T columns | |
| C1_mat=[ | |
| 1913.6 12447 30609 | |
| 4625.7 18872 32995 | |
| 23306 40764 47535 | |
| 10736 18721 26325 | |
| 18036 33630 48274 | |
| 12251 18360 26839 | |
| 9022.9 23394 30606]; % [F] C1 Capacitance vs SOC rows and T columns | |
| Tau1_mat=R1_mat.*C1_mat; | |
| Ndisc=100;delV0=0;delR0=0;delR1=0;delR2=0;delAH0=0; % No change with cycling, not used in simulation | |
| % ------------------------------------------------------------------------- | |
| %% Cell Thermal | |
| MdotCp=100; % Cell thermal mass (mass times specific heat [J/K]) | |
| K_cell=0.8; % Cell thermal conductivity [W/(m*K)] | |
| h_cell=2; % Heat transfer coefficient to ambient [W/(m^2*K)] | |
| % ------------------------------------------------------------------------- | |
| %% Module Electrical | |
| R12=2e-3; % Module1-to-module2 connection resistance | |
| cell_H=0.20; % Cell height [m] | |
| cell_W=0.12; % Cell width [m] | |
| cell_T=0.02; % Cell thickness [m] | |
| Ns1=10; % Module-1 Number of series connected strings | |
| Np1=1; % Module-1 Number of parallel cells per string | |
| Rext1=1e-3; % Module-1 Accessory total resistance | |
| Ns2=Ns1; % Module-2 Number of series connected strings | |
| Np2=Np1; % Module-2 Number of parallel cells per string | |
| Rext2=Rext1; % Module-2 Accessory total resistance | |
| % ------------------------------------------------------------------------- | |
| %% Module Thermal | |
| Flowrate_vec=[0 0.02 0.04 0.06 0.08 0.10]; % Flowrate vector L [kg/s] | |
| lenF=size(Flowrate_vec,2);lenT=size(T_vec,2);% Temporary variables for size | |
| Q1=1.2*ones(lenT,lenF,Ns1*Np1); % Module-1 Effective rate of coolant heat transfer from each cell | |
| extQ1=zeros(1,Ns1*Np1); % Module-1 Cell-to-Cell External Heat variation | |
| Q2=Q1; % Module-2 Effective rate of coolant heat transfer from each cell | |
| extQ2=extQ1; % Module-2 Cell-to-Cell External Heat variation | |
| %% Cell-to-cell variation | |
| iniT1=ambient*ones(1,Ns1*Np1); % Module-1 Cell-to-Cell initial Temperature variation | |
| iniSOC1=initialPackSOC*ones(1,Ns1*Np1); % Module-1 Cell-to-Cell initial SOC variation | |
| iniR01=ones(1,Ns1*Np1); % Module-1 Cell-to-Cell Terminal Resistance variation | |
| iniAH1=ones(1,Ns1*Np1); % Module-1 Cell-to-Cell capacity variation vector | |
| iniT2=iniT1; % Module-2 Cell-to-Cell initial Temperature variation | |
| iniSOC2=iniSOC1; % Module-2 Cell-to-Cell initial SOC variation | |
| iniR02=iniR01; % Module-2 Cell-to-Cell Terminal Resistance variation | |
| iniAH2=iniAH1; % Module-2 Cell-to-Cell capacity variation vector | |
| % One of the cell (1st cell of the first module) has higher R0 than the other cells | |
| iniR01(1,1)=1.05; | |
| % One of the cell (3rd cell of second module) has lower R0 than other cells | |
| iniR02(1,3)=0.97; | |