unmodified source for paired deterministic corruption


publisher fine-action occupancy at or above the readiness threshold


Without instruction, the student removes the sd card.


The student does not listen to the instructor.


Wrong Action, corrected by instructor verbally

The student makes a mistake when placing the joy-con controller.


acting hand only; never a claim that every hand is absent


The student should not drop the ratchet.

The student should not slide the ratchet_adjuster.

The ratchet_adjuster is in a wrong direction, so the student cannot screw the bolt.


The student grabbed the wrong component.


The student can not lock the wheel because the wheel is not secure.


The student inserts the first wheel in the wrong way.


The student grab the battery lock instead of sliding it to release the battery.


The student attempts to open the battery cover by slide the cover lever instead of open the SD card cover.


The student slide the switch instead of press the Lens release button.


The student should leave the mount open.

The student should grab the mount adapter.


Accidentally, the student pushes in other direction the mount.


The student pushes the wrong battery door.


The student should not disassemble the ratcher_head.


The student fails to slide the ratchet_adjuster.


The student tries to insert the shift_arm into a wrong place.


The student tries to plug the wrong side of the HDMI cable.


The student tries to plug the wrong side of the HDMI cable and in the wrong tab,


The student returns the RAM to the motherboard.


The student presses the RAM tabs while grabbing the RAM.


The student places the cover on the computer and do not close it.


The student flips the computer tower vertically.


The student pulls the graphic card without unlocking the tab first.


The student pushes the tabs in the wrong direction.

The student is pushing the tabs in the wrong direction.


The student first needs to move the lever.


The student drops the circuit_breaker accidentally.


The student presses the RAM tabs instead push it.


The student aligns wrong way the ram stick.


The student tries to place the RAM tabs, but he need to push them down.


The student tries to install the second pair of RAM tabs, but he had it backwards.


The student tries to remove the battery.


The student tries to insert the lens into the DSLR incorrectly.


Student should loose the hex socket head a bit first.


Student should keep the nightstand laid down to assemble the last tray.


The student should rotate the shelf while keeping it laying down so the student can access to other legs.


Student should rotate the nightstand for better angle to steer.


Student puts the nightstand at a wrong position.


The student touches the incorrect button.


The student places the paper stack in the wrong compartment.


The student lifts the incorrect compartment.


The student touches the button and is unnecessary.


The student places the ink cartridge incorrectly.


The student presses the button for not enough time.


The student waits for the coffee to pour.


The student should keep the tray vertical on the table and make sure his hands look good on the camera.

The student should keep the shelf vertical on the table.

The student should make sure her hands look good on the camera.


The action is not what the instructor requested.


The student needs to disassemble the seat first.


The student needs to flip the stool first.


The student should not have flipped the stool.


The student should not lift screwdriver.


The student should not drop the coffee_capsule


The student should not have to approach there.


The student inserts the capsule container by mistake.

Unnecessary movement. Corrected by the instructor.


The student pulls the dispenser but doesn't work. Then the instructor tells him to raise the lever.


the student drops the capsule but in  wrong way.

The student approaches the capsules but it was unnecessary.


The student pulls the wrong part of the dispenser and the instructor says what part he should pull.

The student lifts the drip tray when he need to pull.


The student presses the wrong part of the DSLR.


The student opens the wrong part of the DSLR.


The student should press the button instead.


The student should press the gray button instead.


The student is opening the door incorrectly.


The student aligns the legs in the wrong way.


The student has to rotate the saddle washer to the right position.


The student presses the button incorrectly.


The student presses the button for less than 3 seconds.


The student inserts the GoPro to the strap the wrong way.


The student can't screw the GoPro properly.


The student tries to insert the GoPro without removing the screw.


The student removes the battery door accidentally.


The student can't insert the battery door correctly.


The student doesn't press the button long enough.


The student pulls wrong the cartridge gate.


The student holds a part of the printer.


The student inspects the paper tray to fins the tray extension.


The student should put the cup on the right.