# Tasks and baselines Every definition in this dataset, with the expert baseline it is scored against on each hardware tier: whether it runs there, and whether it is specialized for that tier. The marks come from the dataset, the recorded runs and a check of each baseline's code. `loop_120` and `loop_124` are not in the Eval set (see the notes on ✗). 7 KleidiAI definitions have an SVE expert, among them `gemm_qai8dxp_qs4c32_n256_k512` (the Graviton3 twin of `gemm_qai8dxp_qs4c32_sme2_n256_k512`) and `softmax_fp32`. | Mark | Meaning | |---|---| | ★ | Runs on that machine, and its code is specialized for the tier: it uses SVE on Graviton3, SVE2-only instructions on Graviton4, SME (ZA) on M4 | | ✓ | Runs on that machine as optimized code (hand-written or vendor), but not specialized for the tier, e.g. NEON code, or SVE code on Graviton4 or in streaming mode on M4 (streaming SVE counts as ✓, not ★). It does not fall back to compiler-vectorized scalar code | | ? | A baseline exists for this tier but has not been confirmed on the machine yet | | ✗ | Tried and fails on the machine (see the notes at the end) | | — | No baseline for this tier | Tiers: **SVE** = Graviton3 (c7g), **SVE2** = Graviton4 (c8g), **SME2** = Apple M4 (mac-m4.metal). "Runs" means a recorded run on that machine computed speedups against the baseline; for SIMD Loops on M4, the baseline was also run on every workload. How each source's baseline is chosen and marked is explained under *Notes on the baselines* at the end. **Eval set** = the 99 evaluated kernels listed in `expected_sets.json`: 79 on Graviton3 (23 ncnn, 26 llama.cpp, 24 SIMD Loops, 6 KleidiAI with an SVE expert; `softmax_fp32` is not in it) and, under `kleidiai-sme2`, the 20 KleidiAI kernels with an SME2 expert, evaluated on M4. **Subset** = the 32-kernel subset; `subset_sve.json` and `subset_sme2.json` differ only in the KleidiAI GEMM (`gemm_fp32_n512_k512` vs `gemm_fp32_sme2_n512_k512`), so 33 rows carry the mark. ## Summary | Source | Definitions | SVE ★ / ✓ / ? / ✗ / — | SVE2 ★ / ✓ / ? / ✗ / — | SME2 ★ / ✓ / ? / ✗ / — | |---|---|---|---|---| | ncnn | 23 | 0 / 23 / 0 / 0 / 0 | 0 / 23 / 0 / 0 / 0 | 0 / 23 / 0 / 0 / 0 | | llama.cpp | 26 | 0 / 26 / 0 / 0 / 0 | 0 / 26 / 0 / 0 / 0 | 0 / 26 / 0 / 0 / 0 | | SIMD Loops | 47 | 25 / 0 / 0 / 5 / 17 | 10 / 17 / 0 / 9 / 11 | 7 / 16 / 0 / 8 / 16 | | KleidiAI | 30 | 7 / 3 / 0 / 0 / 20 | 0 / 7 / 1 / 0 / 22 | 20 / 0 / 0 / 0 / 10 | | e2e (llama.cpp GEMMs) | 18 | 0 / 18 / 0 / 0 / 0 | 0 / 18 / 0 / 0 / 0 | 0 / 18 / 0 / 0 / 0 | | **All** | **144** | 32 / 70 / 0 / 5 / 37 | 10 / 91 / 1 / 9 / 33 | 27 / 83 / 0 / 8 / 26 | ## ncnn (23) | Definition | Op | Workloads | Eval set | Subset | SVE | SVE2 | SME2 | |---|---|---|---|---|---|---|---| | `conv2d_depthwise_fp32_kh3_kw3_sh1_sw1_dh1_dw1_p1` | conv2d_depthwise | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_depthwise_fp32_kh3_kw3_sh2_sw2_dh1_dw1_p1` | conv2d_depthwise | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_depthwise_fp32_kh5_kw5_sh1_sw1_dh1_dw1_p2` | conv2d_depthwise | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_depthwise_fp32_kh5_kw5_sh2_sw2_dh1_dw1_p2` | conv2d_depthwise | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_depthwise_w8a8ch_kh3_kw3_sh1_sw1_dh1_dw1_p1` | conv2d_depthwise | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_depthwise_w8a8ch_kh3_kw3_sh2_sw2_dh1_dw1_p1` | conv2d_depthwise | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_depthwise_w8a8ch_kh5_kw5_sh1_sw1_dh1_dw1_p2` | conv2d_depthwise | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_depthwise_w8a8ch_kh5_kw5_sh2_sw2_dh1_dw1_p2` | conv2d_depthwise | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_fp32_kh1_kw1_sh1_sw1_dh1_dw1_p0` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_fp32_kh1_kw1_sh2_sw2_dh1_dw1_p0` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_fp32_kh3_kw3_sh1_sw1_dh1_dw1_p1` | conv2d | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_fp32_kh3_kw3_sh2_sw2_dh1_dw1_p1` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_fp32_kh7_kw7_sh2_sw2_dh1_dw1_p3` | conv2d | 11 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_w8a8ch_kh1_kw1_sh1_sw1_dh1_dw1_p0` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_w8a8ch_kh1_kw1_sh2_sw2_dh1_dw1_p0` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_w8a8ch_kh3_kw3_sh1_sw1_dh1_dw1_p1` | conv2d | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `conv2d_w8a8ch_kh3_kw3_sh2_sw2_dh1_dw1_p1` | conv2d | 20 | ✓ | | ✓ | ✓ | ✓ | | `conv2d_w8a8ch_kh7_kw7_sh2_sw2_dh1_dw1_p3` | conv2d | 11 | ✓ | ✓ | ✓ | ✓ | ✓ | | `pooling_fp32_global_avg` | pooling | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `pooling_fp32_max_kh2_kw2_sh2_sw2_p0` | pooling | 6 | ✓ | | ✓ | ✓ | ✓ | | `pooling_fp32_max_kh3_kw3_sh1_sw1_p1` | pooling | 6 | ✓ | | ✓ | ✓ | ✓ | | `pooling_fp32_max_kh3_kw3_sh2_sw2_p0` | pooling | 6 | ✓ | | ✓ | ✓ | ✓ | | `pooling_fp32_max_kh3_kw3_sh2_sw2_p1` | pooling | 11 | ✓ | ✓ | ✓ | ✓ | ✓ | ## llama.cpp (26) | Definition | Op | Workloads | Eval set | Subset | SVE | SVE2 | SME2 | |---|---|---|---|---|---|---|---| | `gemm_bf16_n1024_k2048` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_bf16_n1408_k2048` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_bf16_n2048_k1024` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_bf16_n2048_k1408` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_bf16_n2048_k2048` | gemm | 24 | ✓ | ✓ | ✓ | ✓ | ✓ | | `gemm_q4_k_m_n1024_k2048` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q4_k_m_n1408_k2048` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q4_k_m_n2048_k1024` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q4_k_m_n2048_k1536` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q4_k_m_n2048_k2048` | gemm | 24 | ✓ | ✓ | ✓ | ✓ | ✓ | | `gemm_q8_0_n1024_k2048` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q8_0_n1408_k2048` | gemm | 24 | ✓ | ✓ | ✓ | ✓ | ✓ | | `gemm_q8_0_n2048_k1024` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q8_0_n2048_k1408` | gemm | 24 | ✓ | | ✓ | ✓ | ✓ | | `gemm_q8_0_n2048_k2048` | gemm | 24 | ✓ | ✓ | ✓ | ✓ | ✓ | | `gqa_bf16_h32_d128_kvh8` | gqa | 20 | ✓ | | ✓ | ✓ | ✓ | | `mha_bf16_h16_d128_kvh16` | mha | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `mla_decode_bf16_h16_lora512_rope64_v128` | mla_decode | 20 | ✓ | | ✓ | ✓ | ✓ | | `mla_prefill_bf16_h16_qk192_vo128` | mla_prefill | 20 | ✓ | | ✓ | ✓ | ✓ | | `moe_bf16_e60_k4_d2048_ff1408` | moe | 20 | ✓ | | ✓ | ✓ | ✓ | | `moe_bf16_e64_k8_d2048_ff1024` | moe | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `moe_q4_k_m_e60_k4_d2048_ff1536` | moe | 20 | ✓ | | ✓ | ✓ | ✓ | | `moe_q4_k_m_e64_k8_d2048_ff1024` | moe | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `moe_q8_0_e60_k4_d2048_ff1408` | moe | 20 | ✓ | | ✓ | ✓ | ✓ | | `moe_q8_0_e64_k8_d2048_ff1024` | moe | 20 | ✓ | ✓ | ✓ | ✓ | ✓ | | `rms_norm_fp32_d2048` | rms_norm | 24 | ✓ | ✓ | ✓ | ✓ | ✓ | ## SIMD Loops (47) Loops without the Eval set mark are in the dataset but not in the main results. `loop_005`, `006`, `034`, `128` and the matrix loops `216`–`223` (except `219`) have no expert baseline yet. | Definition | Op | Workloads | Eval set | Subset | SVE | SVE2 | SME2 | |---|---|---|---|---|---|---|---| | `loop_001` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_002` | | 10 | ✓ | ✓ | ★ | ✓ | ✗ | | `loop_003` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_004` | | 10 | ✓ | | ★ | ✓ | ✓ | | `loop_008` | | 10 | ✓ | | ★ | ✓ | — | | `loop_024` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_027` | | 10 | ✓ | ✓ | ★ | ✓ | ✗ | | `loop_028` | | 10 | ✓ | | ★ | ✓ | ✗ | | `loop_029` | | 10 | ✓ | | ★ | ✓ | ✓ | | `loop_033` | | 10 | ✓ | | ★ | ✓ | ✓ | | `loop_035` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_037` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_038` | | 10 | ✓ | | ★ | ✓ | ✗ | | `loop_103` | | 10 | ✓ | | ★ | ★ | — | | `loop_105` | | 10 | ✓ | ✓ | ★ | ★ | ✓ | | `loop_108` | | 10 | ✓ | ✓ | ★ | ★ | ✓ | | `loop_109` | | 10 | ✓ | | ★ | ★ | ✓ | | `loop_110` | | 10 | ✓ | | ★ | ★ | ✓ | | `loop_112` | | 10 | ✓ | | ★ | ★ | ✓ | | `loop_113` | | 10 | ✓ | ✓ | ★ | ★ | ✓ | | `loop_114` | | 10 | ✓ | | ★ | ★ | ✗ | | `loop_120` | | 10 | | | ✗ | ✗ | — | | `loop_124` | | 10 | | | ✗ | ✗ | — | | `loop_126` | | 10 | ✓ | ✓ | ★ | ✓ | ✓ | | `loop_127` | | 10 | ✓ | ✓ | ★ | ✓ | ✗ | | `loop_219` | | 10 | ✓ | | ★ | ✓ | ★ | | `loop_005` | | 10 | | | — | — | — | | `loop_006` | | 10 | | | — | — | — | | `loop_010` | | 10 | | | ★ | ✓ | ✗ | | `loop_032` | | 10 | | | ✗ | ✗ | — | | `loop_034` | | 10 | | | — | — | — | | `loop_101` | | 10 | | | — | ★ | ✓ | | `loop_102` | | 10 | | | — | ★ | — | | `loop_104` | | 10 | | | — | ✗ | — | | `loop_106` | | 10 | | | — | ✗ | — | | `loop_121` | | 10 | | | ✗ | ✗ | — | | `loop_122` | | 10 | | | ✗ | — | — | | `loop_123` | | 10 | | | — | ✗ | — | | `loop_128` | | 10 | | | — | — | ✗ | | `loop_130` | | 10 | | | — | ✗ | — | | `loop_135` | | 10 | | | — | ✗ | — | | `loop_216` | | 10 | | | — | — | ★ | | `loop_217` | | 10 | | | — | — | ★ | | `loop_218` | | 10 | | | — | — | ★ | | `loop_220` | | 10 | | | — | — | ★ | | `loop_221` | | 10 | | | — | — | ★ | | `loop_223` | | 10 | | | — | — | ★ | ## KleidiAI (30) | Definition | Op | Workloads | Eval set | Subset | SVE | SVE2 | SME2 | |---|---|---|---|---|---|---|---| | `conv2d_depthwise_f16_nhwc_kh3_kw3_s1_p1` | conv2d_depthwise | 20 | ✓ | | — | — | ★ | | `conv2d_depthwise_fp32_nhwc_kh3_kw3_s1_p1` | conv2d_depthwise | 20 | ✓ | | — | — | ★ | | `conv2d_f16_nhwc_kh3_kw3_valid_c32_c64` | conv2d | 20 | ✓ | | — | — | ★ | | `conv2d_fp32_nhwc_kh3_kw3_s1_p1_c32_c64` | conv2d | 16 | ✓ | | ★ | ✓ | — | | `conv2d_fp32_nhwc_kh3_kw3_s1_p1_c32_c64_sme2` | conv2d | 16 | ✓ | | — | — | ★ | | `gemm_bf16_n512_k512` | gemm | 15 | ✓ | | — | — | ★ | | `gemm_f16_n512_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_f16_qai4c32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_f16_qs4cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_f16_qs8cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_f16act_qs4c32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_f32_bf16_n512_k512` | gemm | 13 | | | ✓ | ✓ | — | | `gemm_fp32_n512_k512` | gemm | 13 | ✓ | ✓ | ★ | ✓ | — | | `gemm_fp32_sme2_n512_k512` | gemm | 13 | ✓ | ✓ | — | — | ★ | | `gemm_i32_u8_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qai4c32_n256_k512` | gemm | 13 | | | ✓ | ✓ | — | | `gemm_qai4c32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qai8_qsi8cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qai8dxp_qs4c32_n256_k512` | gemm | 13 | ✓ | | ★ | — | — | | `gemm_qai8dxp_qs4c32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qs4c32_n256_k512` | gemm | 13 | ✓ | | ★ | — | — | | `gemm_qs4c32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qs4cx_n512_k512` | gemm | 13 | ✓ | | ★ | ✓ | — | | `gemm_qs4cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qs8cx_n512_k512` | gemm | 13 | ✓ | | ★ | ✓ | — | | `gemm_qs8cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_qsu2cx_n256_k512` | gemm | 13 | | | ✓ | ✓ | — | | `gemm_qsu2cx_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `gemm_u8_f32_sme2_n256_k512` | gemm | 13 | ✓ | | — | — | ★ | | `softmax_fp32` | softmax | 13 | | | ★ | ? | — | ## e2e (llama.cpp GEMMs) (18) | Definition | Op | Workloads | Eval set | Subset | SVE | SVE2 | SME2 | |---|---|---|---|---|---|---|---| | `gemm_ggml_q4_K_n1024_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n1024_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n14336_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n2560_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n2560_k9216` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n4096_k14336` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n4096_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n4096_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n8192_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q4_K_n9216_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q5_K_n2560_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q5_K_n8192_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n1024_k2560` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n1024_k4096` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n128256_k4096` | gemm | 4 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n248320_k2560` | gemm | 4 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n2560_k9216` | gemm | 6 | | | ✓ | ✓ | ✓ | | `gemm_ggml_q6_K_n4096_k14336` | gemm | 6 | | | ✓ | ✓ | ✓ | ## Notes on ✗ - `loop_120` and `loop_124` (Graviton3 and Graviton4): both sort their first input in place. The harness calls the kernel on the same buffers for the correctness, warmup and timed calls and does not restore the input in between, so every timed call, the baseline's included, sorts data that is already sorted, and a kernel that returns early on sorted input or caches its result looks 20–100x faster. The baselines themselves run correctly; the timings are not valid, so both loops are left out of the Eval set. - `loop_032` (`baseline-simd-loop-sve` on Graviton3): wrong results on 7 of 10 workloads. - `loop_121` (`baseline-simd-loop-sve` on Graviton3): hangs (no result after 20 min). - `loop_122` (`baseline-simd-loop-sve` on Graviton3): about 960x slower than the auto-vectorized scalar starting point. - `loop_032` (`baseline-simd-loop-sve2` on Graviton4): wrong results on 7 of 10 workloads. - `loop_104` (`baseline-simd-loop-sve2` on Graviton4): wrong results on 1 of 10 workloads. - `loop_106` (`baseline-simd-loop-sve2` on Graviton4): does not compile (its compile flags lack the SVE2 extension it uses). - `loop_121` (`baseline-simd-loop-sve2` on Graviton4): hangs (no result after 15 min). - `loop_123` (`baseline-simd-loop-sve2` on Graviton4): about 3.9x slower than the auto-vectorized scalar starting point. - `loop_130` (`baseline-simd-loop-sve2` on Graviton4): does not compile (its compile flags lack the SVE2 extension it uses). - `loop_135` (`baseline-simd-loop-sve2` on Graviton4): does not compile (its compile flags lack the SVE2 extension it uses). - `loop_002` (`baseline-simd-loop-sme2` on M4): about 2.2x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_010` (`baseline-simd-loop-sme2` on M4): about 44x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that (the scalar loop exits early, while the baseline scans the whole array). - `loop_027` (`baseline-simd-loop-sme2` on M4): about 2.3x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_028` (`baseline-simd-loop-sme2` on M4): about 6.1x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_038` (`baseline-simd-loop-sme2` on M4): about 5.0x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_114` (`baseline-simd-loop-sme2` on M4): about 3.3x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_127` (`baseline-simd-loop-sme2` on M4): about 5.3x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that. - `loop_128` (`baseline-simd-loop-sme2` on M4): 2.01x slower than the scalar starting point auto-vectorized for M4, so it fails the rule that a baseline be at most 2x slower than that, just over the limit. ## Notes on the baselines - **ncnn** → `baseline-ncnn`, the upstream ncnn kernel, the same on every tier. ncnn is built with its SVE options off, so this is NEON code everywhere: ✓, never ★. - **llama.cpp and e2e** → `baseline-llamacpp`, the ggml CPU kernel built natively on each machine. The exception is the five `gemm_bf16_*` GEMMs: ggml's bf16 mul_mat is scalar on Arm, so their baseline is a NEON BFMMLA kernel written for this benchmark. Which kernels reach ggml's SVE code has not been checked, so these are ✓; ggml's KleidiAI path is off. ggml picks its kernel by op, data type and CPU features, not by shape, so a cell with no recorded run is ✓ when the same op and data type ran on that machine (8 llama.cpp definitions on Graviton4). e2e has recorded runs only on Graviton4 and is ✓ on Graviton3 and M4 for the same reason (q4_K ran on both in the llama.cpp set; q5_K and q6_K have not). - **SIMD Loops** → one hand-written Arm baseline per tier. `baseline-simd-loop-sve2` uses SVE2-only instructions in some loops (★) and is SVE code in the rest (✓). Of the 31 `baseline-simd-loop-sme2`, 24 are SVE code run in streaming mode (`__arm_locally_streaming`, tag `sme2-kernel:streaming-sve`) and 7 use ZA (tag `sme2-kernel:za`: the matrix loops 216–221 and 223). Streaming SVE counts as ✓, not ★, because it uses nothing SME adds (ZA, outer products, SME2 multi-vector instructions); the ZA ones are ★. All 31 were run on M4 and pass every workload; the 2x check against the auto-vectorized starting point flags 8 of them, which are ✗ (see the notes on ✗). `loop_032` has no SME2 code upstream, and under `-mcpu=apple-m4` its source falls back to NEON, which streaming mode rejects on M4, so it has no `baseline-simd-loop-sme2` (—). - **KleidiAI** → `baseline-kleidiai`: each kernel uses an SVE micro-kernel (`gemm_fp32`, `gemm_qs4c32`, `conv2d_fp32_nhwc_kh3_kw3_s1_p1_c32_c64`), a NEON dot-product / i8mm / bf16 one (`gemm_f32_bf16`, `gemm_qai4c32`, `gemm_qsu2cx`; KleidiAI has no SVE kernel for them: ✓ on Graviton3 and Graviton4, not specialized for either), or an SME2 one (M4). `gemm_qs8cx` and `gemm_qs4cx` choose at run time: on 256-bit SVE with SVE I8MM (Graviton3) they run KleidiAI's SVE micro-kernels (★; these need exactly 256-bit vectors), elsewhere (Graviton4) a NEON pair (✓). `gemm_qs4cx` keeps the NEON GEMV at M = 1, as KleidiAI has no SVE GEMV for that format. All their KleidiAI sources are from commit 9e404c3. Of the SME2 definitions, `conv2d_fp32_nhwc_kh3_kw3_s1_p1_c32_c64_sme2` and the quantized and integer GEMMs run SME2 `mopa` micro-kernels (★); `gemm_i32_u8` and `gemm_u8_f32` use KleidiAI's newer `kai_matmul_uker` API. `gemm_qai8dxp_qs4c32_n256_k512` runs `kai_matmul_clamp_f32_qai8dxp2vsx8sf32_qsi4c32p8x8s16s0sbf16bf32_8vsx8_sve_i8mm` for M > 1 (exactly 256-bit SVE, so — on Graviton4) and KleidiAI's NEON GEMV `kai_matmul_clamp_f32_qai8dxp1x4_qsi4c32p8x4_1x8_neon_dotprod` (the fastest GEMV of the family there) at M = 1, as there is no SVE GEMV for that format. `softmax_fp32` runs `kai_softmax_f32_f32_1d_sve_fexpa` (any vector length; ? on Graviton4, not yet run there) and is judged by SQNR against it: its outputs (about 1/N) are below the default absolute tolerance.