image
image
id
string
status
string
failure
string
family
string
spec
string
material
string
process
string
E_MPa
float64
poisson
float64
density_g_cm3
float64
yield_MPa
float64
load_N
list
load_basis
string
fixed_points_mm
list
load_points_mm
list
voxel_mm
float64
grid_xyz
list
origin_mm
list
keep_target
float64
keep_reached
float64
keep_floor
float64
detail
string
solves
int64
seconds
float64
stop
string
stiffness_per_mass_gain
float64
mass_g_before
float64
mass_g_after
float64
safety_factor_before
float64
safety_factor_after
float64
member_stress_MPa_before
float64
member_stress_MPa_after
float64
corner_peak_MPa_after
float64
max_disp_mm_before
float64
max_disp_mm_after
float64
deflection_limit_mm
float64
passes_strength
bool
passes_deflection
bool
passes
bool
pieces
int64
largest_piece_share
float64
thinnest_member_mm
float64
member_mm_median
float64
print_direction
string
print_overhang_unsupported
float64
overhang_by_direction
string
reproducible
bool
f64_rel_diff
float64
compliance_before
float64
compliance_after
float64
carve_load_N
list
carve_E_MPa
float64
arrays
string
params
string
history
string
scriptcad_doc
string
python
string
00000
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 516 x 854 x 779 mm design space, held at 4 support faces, carrying 2.10 kN at 26 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 919.5, -1888 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 65.45, 305.75, -12 ], [ 429.24999999999994, 305.75, -12 ], [ 65.45, 708.35, -12 ], [ 429.24999999999994, 708.35, -12 ] ]
[ [ 247.35, 233.9, 306.25 ], [ 247.35, 590.5, 518.75 ] ]
9.38
[ 55, 91, 83 ]
[ -9.38, -9.38, -21.380000000000003 ]
0.3
0.3
0.0807
medium
49
47.5
target reached
2.2536
440,881.51
131,072.28
5,501.469
2,838.186
0.04
0.08
0.19
0.00091
0.00158
1.7072
true
true
true
1
1
37.52
37.52
+y
0.2292
{"+z": 0.2989, "-z": 0.2651, "+y": 0.2292, "-y": 0.2628, "+x": 0.5978, "-x": 0.5906}
true
0
0.200594
0.299394
[ 0, 487, -1000 ]
70,000
arrays/00000.npz
{"feet": 4, "rounded": true, "W": 494.7, "D": 831.2, "H": 744.2, "lip": 320.3, "seatFront": 356.8, "seatRear": 255.7, "seatDepth": 397.8, "gapY": 431.7, "gapZ": 293.3, "backTopY": 749.3, "P": 37.7, "tp": 12.0, "footY": 286.9, "footX": 46.6, "rearFootY": 689.5}
[{"fraction": 1, "compliance": 0.2005935125742318, "dmax": 0.0004840703955728616}, {"fraction": 0.9699985025818387, "compliance": 0.20062036677758466, "dmax": 0.00048411459414456396}, {"fraction": 0.9409002864416031, "compliance": 0.2006718384448602, "dmax": 0.0004738046409257238}, {"fraction": 0.9123623945165513, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 494.7}, {"name": "D", "value": 831.2}, {"name": "H", "value": 744.2}, {"name": "lip", "value": 320.3}, {"name": "seatFront", "value": 356.8}, {"name": "seatRear", "value": 255.7}, {"name": "seatDepth", "value": 397.8}, {"name": "gapY", "value": 431.7...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 494.7, D = 831.2, H = 744.2, lip = 320.3, seatFront = 356.8, seat...
00001
ok
null
beam
A steel S355 beam (machined or welded), within a 318 x 25 x 57 mm design space, held at 2 support faces, carrying 6.82 kN at 7 degrees from vertical on 1 load face. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -815.9, 0, -6771 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 9.14734038724675, 10.549516373711603, -4 ], [ 306.25329032664, 10.549516373711603, -4 ] ]
[ [ 182.90922451984108, 10.549516373711603, 50.892061919373674 ] ]
1.17
[ 272, 21, 49 ]
[ -1.17, -1.17, -5.17 ]
0.3
0.3
0.0121
fine
49
33.9
target reached
1.7545
2,487.14
748.61
10.382
5.634
34.19
63.01
91.88
0.04533
0.08654
0.6365
true
true
true
1
1
2.34
4.68
+x
0.1294
{"+z": 0.6157, "-z": 0.6053, "+y": 0.8432, "-y": 0.8556, "+x": 0.1294, "-x": 0.1352}
true
0.000001
26.092917
49.408893
[ -241, 0, -2000 ]
210,000
arrays/00001.npz
{"kind": "two feet", "L": 315.4, "W": 21.1, "H": 46.9, "pad_x": 169.4, "pad_len": 27.0, "foot": 18.3}
[{"fraction": 1, "compliance": 26.09291674286313, "dmax": 0.013388224535770621}, {"fraction": 0.9699976270985348, "compliance": 26.131262984207154, "dmax": 0.013408806075370067}, {"fraction": 0.9408999228807023, "compliance": 26.324059657800237, "dmax": 0.013515144253549919}, {"fraction": 0.9126722825334678, "complianc...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 315.40063071388676, "w": 21.099032747423205, "h": 46.892061919373674}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 18.2946807...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 315.400630714, 21.099032747, 46.89206...
00002
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 120 x 131 x 171 mm design space, held at 4 support faces, carrying 57.38 kN at 10 degrees from vertical on 1 load face. Keep 40% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 ...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 9709.1, -3443.4, -56448.5 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 23.270625204835557, 121.15029402735152, 34.37268838395123 ], [ 90.04433712280066, 121.15029402735152, 34.37268838395123 ], [ 23.270625204835557, 121.15029402735152, 130.29303600559555 ], [ 90.04433712280066, 121.15029402735152, 130.29303600559555 ] ]
[ [ 24.81752956641192, -4, 40.5092599491457 ] ]
2.22
[ 54, 59, 77 ]
[ -2.22, -6.220000000000001, -2.22 ]
0.4
0.4
0.0068
coarse
39
20.9
target reached
2.0487
17,535.89
7,139.28
10.301
7.454
43.69
60.37
100.49
0.06385
0.07608
0.3419
true
true
true
1
1
18.31
31.08
+y
0.2498
{"+z": 0.4223, "-z": 0.2989, "+y": 0.2498, "-y": 0.4786, "+x": 0.6914, "-x": 0.4315}
true
0.000002
0.950478
1.139576
[ 172, -61, -1000 ]
210,000
arrays/00002.npz
{"Wx": 113.3, "Dy": 117.2, "Hz": 164.7, "bolts": 4, "pad_on_top": false, "pad": [29.60219578848807, 14.707623224055123]}
[{"fraction": 1, "compliance": 0.9504782125311897, "dmax": 0.0010395777416288376}, {"fraction": 0.9700016888224082, "compliance": 0.9505149276925671, "dmax": 0.0010396184793802358}, {"fraction": 0.9409008661246351, "compliance": 0.9507004725524568, "dmax": 0.0010398064482927748}, {"fraction": 0.9126734058722767, "compl...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 113.31496232763622, "w": 117.15029402735152, "h": 164.66572438954677}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 13.597795479316346, "y": 117....
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 113.314962328, 117.150294027, 1...
00003
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 439 x 748 x 783 mm design space, held at 4 support faces, carrying 2.10 kN at 26 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 916.4, -1889.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 118.7, 240.4, -12 ], [ 302.59999999999997, 240.4, -12 ], [ 118.7, 549, -12 ], [ 302.59999999999997, 549, -12 ] ]
[ [ 210.65, 238, 340.7 ], [ 210.65, 545.25, 537.55 ] ]
8.6
[ 51, 87, 91 ]
[ -8.6, -8.6, -20.6 ]
0.3
0.3
0.0791
fine
48
44.9
target reached
2.3294
343,166.96
102,961.58
4,450.834
2,092.055
0.06
0.13
0.34
0.00231
0.0036
1.5652
true
true
true
1
1
17.2
34.4
+z
0.2286
{"+z": 0.2286, "-z": 0.2287, "+y": 0.3084, "-y": 0.3347, "+x": 0.5736, "-x": 0.562}
true
0.000012
0.433966
0.620921
[ 0, 485, -1000 ]
70,000
arrays/00003.npz
{"feet": 4, "rounded": true, "W": 421.3, "D": 727.0, "H": 748.9, "lip": 366.1, "seatFront": 413.7, "seatRear": 267.7, "seatDepth": 406.0, "gapY": 435.9, "gapZ": 326.2, "backTopY": 654.6, "P": 30.6, "tp": 12.0, "footY": 225.1, "footX": 103.4, "rearFootY": 533.7}
[{"fraction": 1, "compliance": 0.4339658723305423, "dmax": 0.0012048501142931103}, {"fraction": 0.969997780115627, "compliance": 0.43400206681115056, "dmax": 0.0011762821520715366}, {"fraction": 0.940897991487226, "compliance": 0.43403238025574387, "dmax": 0.0011758855965800544}, {"fraction": 0.9126716791012364, "compl...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 421.3}, {"name": "D", "value": 727.0}, {"name": "H", "value": 748.9}, {"name": "lip", "value": 366.1}, {"name": "seatFront", "value": 413.7}, {"name": "seatRear", "value": 267.7}, {"name": "seatDepth", "value": 406.0}, {"name": "gapY", "value": 435.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 421.3, D = 727, H = 748.9, lip = 366.1, seatFront = 413.7, seatRe...
00004
ok
null
beam
A steel S355 beam (machined or welded), within a 153 x 32 x 53 mm design space, held at 3 support faces, carrying 41.58 kN straight down on 1 load face. Keep 15% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 748.3, 0, -41572.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 6.283927821683425, 14.5552959244671, -4 ], [ 143.95379441830963, 14.5552959244671, -4 ], [ 75.11886111999652, 14.5552959244671, -4 ] ]
[ [ 50.47308875340808, 14.5552959244671, 46.46296287687322 ] ]
0.991
[ 154, 32, 53 ]
[ -0.991, -0.991, -4.991 ]
0.15
0.15
0.0292
coarse
72
42.2
target reached
2.5253
1,528.39
230.23
6.452
2.721
55.03
130.47
275.86
0.01261
0.03852
0.3052
true
true
true
2
0.97472
1.98
1.98
+x
0.5268
{"+z": 0.5331, "-z": 0.5914, "+y": 0.8256, "-y": 0.6192, "+x": 0.5268, "-x": 0.5644}
true
0
1.086809
2.857053
[ 36, 0, -2000 ]
210,000
arrays/00004.npz
{"kind": "three feet", "L": 150.2, "W": 29.1, "H": 42.5, "pad_x": 30.8, "pad_len": 39.4, "foot": 12.6}
[{"fraction": 1, "compliance": 1.0868094398062722, "dmax": 0.0006067534147856289}, {"fraction": 0.9700013613644761, "compliance": 1.0868624596588097, "dmax": 0.000606789071468033}, {"fraction": 0.9409021956864194, "compliance": 1.0870071352327966, "dmax": 0.0006068888545789682}, {"fraction": 0.9126733308699119, "compli...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 150.23772223999305, "w": 29.1105918489342, "h": 42.46296287687322}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 12.5678556433...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 150.23772224, 29.110591849, 42.462962...
00005
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 76 x 218 x 110 mm design space, held at 2 support faces, carrying 7.17 kN at 12 degrees from vertical on 1 load face. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 1245.4, -923.5, -6996.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 17.23805031100454, 212.8899267821766, 81.72846030839251 ], [ 54.272633918500574, 212.8899267821766, 81.72846030839251 ] ]
[ [ 48.438087131858396, 18.082599920371877, 104.21976397148786 ] ]
1.96
[ 39, 111, 56 ]
[ -1.96, -1.96, -1.96 ]
0.25
0.25
0.0048
medium
53
32.5
target reached
3.6896
12,011.74
2,958.48
7.054
3.198
63.8
140.7
247.56
0.73427
0.76318
0.4351
true
false
false
1
1
3.92
8.77
+y
0.1063
{"+z": 0.3082, "-z": 0.6314, "+y": 0.1063, "-y": 0.4223, "+x": 0.6425, "-x": 0.687}
true
0.000005
83.756899
92.167306
[ 178, -132, -1000 ]
210,000
arrays/00005.npz
{"Wx": 71.5, "Dy": 208.9, "Hz": 100.2, "bolts": 2, "pad_on_top": true, "pad": [13.018258837201817, 36.16519984074375]}
[{"fraction": 1, "compliance": 83.7568987722295, "dmax": 0.09645498519453963}, {"fraction": 0.9700023254011317, "compliance": 83.75773730813337, "dmax": 0.09372342567154049}, {"fraction": 0.9409008991551042, "compliance": 83.76155949576545, "dmax": 0.09304670090162133}, {"fraction": 0.9126714983334625, "compliance": 83...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 71.51068422950512, "w": 208.8899267821766, "h": 100.21976397148786}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 8.581282107540614, "y": 208.889...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 71.51068423, 208.889926782, 100...
00006
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 480 x 851 x 742 mm design space, held at 3 support faces, carrying 2.10 kN straight down on 2 load faces. Keep 25% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 146.6, -2094.9 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 50.2, 175.7, -12 ], [ 403.90000000000003, 175.7, -12 ], [ 227.05, 742.9000000000001, -12 ] ]
[ [ 227.05, 242.65, 325.25 ], [ 227.05, 605.1, 515.1 ] ]
9.05
[ 53, 94, 82 ]
[ -9.05, -9.05, -21.05 ]
0.25
0.25
0.0761
coarse
54
44.5
target reached
2.2761
399,714.94
99,309.56
6,118.421
2,664.891
0.05
0.1
0.29
0.00049
0.00092
1.7014
true
true
true
1
1
18.1
36.2
+y
0.2439
{"+z": 0.3383, "-z": 0.2967, "+y": 0.2439, "-y": 0.2694, "+x": 0.5248, "-x": 0.5072}
true
0.000001
0.159514
0.282077
[ 0, 70, -1000 ]
70,000
arrays/00006.npz
{"feet": 3, "rounded": true, "W": 454.1, "D": 830.3, "H": 709.6, "lip": 323.8, "seatFront": 373.7, "seatRear": 276.8, "seatDepth": 415.3, "gapY": 439.3, "gapZ": 320.6, "backTopY": 770.9, "P": 38.4, "tp": 12.0, "footY": 156.5, "footX": 31.0, "rearFootY": 723.7}
[{"fraction": 1, "compliance": 0.15951447592115656, "dmax": 0.00023040154207175142}, {"fraction": 0.9699995662587892, "compliance": 0.1595757973468016, "dmax": 0.00023041067081627182}, {"fraction": 0.9409003503665113, "compliance": 0.1596948882642625, "dmax": 0.00023112669387584096}, {"fraction": 0.9126734362424517, "c...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 454.1}, {"name": "D", "value": 830.3}, {"name": "H", "value": 709.6}, {"name": "lip", "value": 323.8}, {"name": "seatFront", "value": 373.7}, {"name": "seatRear", "value": 276.8}, {"name": "seatDepth", "value": 415.3}, {"name": "gapY", "value": 439.3...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 454.1, D = 830.3, H = 709.6, lip = 323.8, seatFront = 373.7, seat...
00007
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 175 x 81 x 101 mm design space, held at 3 support faces, carrying 470.56 kN at 5 degrees from vertical on 1 load face. Keep 15% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -42412.1, 0, -468642.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 5.179571468965891, 38.559312081228015, -4 ], [ 164.05116164547326, 38.559312081228015, -4 ], [ 84.61536655721957, 38.559312081228015, -4 ] ]
[ [ 81.10237461467959, 38.559312081228015, 91.86356616267915 ] ]
1.8
[ 97, 45, 56 ]
[ -1.8, -1.8, -5.8 ]
0.15
0.15
0.0242
fine
72
44.4
target reached
2.2805
9,359.4
1,373.24
3.004
1.142
149.81
394.12
500.87
0.06308
0.21291
0.3492
false
true
false
2
0.98305
3.6
7.2
+z
0.3798
{"+z": 0.3798, "-z": 0.5349, "+y": 0.5012, "-y": 0.5028, "+x": 0.6453, "-x": 0.6424}
true
0.000001
0.429348
1.283188
[ -181, 0, -2000 ]
210,000
arrays/00007.npz
{"kind": "three feet", "L": 169.2, "W": 77.1, "H": 87.9, "pad_x": 57.9, "pad_len": 46.5, "foot": 10.4}
[{"fraction": 1, "compliance": 0.42934780189028404, "dmax": 0.00024742455436495265}, {"fraction": 0.9699990145841545, "compliance": 0.42939286944555743, "dmax": 0.00024746679273403115}, {"fraction": 0.9407518722901064, "compliance": 0.42942440107264224, "dmax": 0.0002474963838765857}, {"fraction": 0.9125295624753647, "...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 169.23073311443915, "w": 77.11862416245603, "h": 87.86356616267915}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 10.359142937...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 169.230733114, 77.118624162, 87.86356...
00008
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 89 x 199 x 98 mm design space, held at 2 support faces, carrying 16.48 kN at 10 degrees from vertical on 1 load face. Keep 40% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -2013.4, -1948.4, -16236.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 22.40022506220749, 194.08811963660466, 63.304366875663526 ], [ 61.01515980543913, 194.08811963660466, 63.304366875663526 ] ]
[ [ 26.92809193632103, 5.534611108493707, 94.44059608999385 ] ]
1.93
[ 46, 103, 51 ]
[ -1.93, -1.93, -1.93 ]
0.4
0.4
0.0062
coarse
38
21.4
target reached
2.218
11,518.61
4,642.01
4.106
2.904
109.59
154.95
241.2
0.49637
0.54668
0.3976
true
false
false
1
1
3.86
11.58
+y
0.1387
{"+z": 0.4145, "-z": 0.6727, "+y": 0.1387, "-y": 0.4367, "+x": 0.7119, "-x": 0.5341}
true
0.000176
26.840867
30.028834
[ -124, -120, -1000 ]
210,000
arrays/00008.npz
{"Wx": 83.4, "Dy": 190.1, "Hz": 90.4, "bolts": 2, "pad_on_top": true, "pad": [19.32014203612428, 11.069222216987415]}
[{"fraction": 1, "compliance": 26.840866761083415, "dmax": 0.028078519471610944}, {"fraction": 0.9699999513460126, "compliance": 26.849495245037758, "dmax": 0.027638330830339772}, {"fraction": 0.9394598434314684, "compliance": 26.927514049579727, "dmax": 0.02813239849101842}, {"fraction": 0.9112745885089012, "complianc...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 83.41538486764662, "w": 190.08811963660466, "h": 90.44059608999385}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 10.009846184117594, "y": 190.08...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 83.415384868, 190.088119637, 90...
00009
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 414 x 768 x 692 mm design space, held at 4 support faces, carrying 2.10 kN at 21 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 747.7, -1962.4 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 113.5, 119.9, -12 ], [ 278.9, 119.9, -12 ], [ 113.5, 538, -12 ], [ 278.9, 538, -12 ] ]
[ [ 196.2, 237.5, 339.04999999999995 ], [ 196.2, 570.65, 485.05 ] ]
8.44
[ 49, 91, 82 ]
[ -8.44, -8.44, -20.439999999999998 ]
0.2
0.2
0.072
fine
62
51.3
target reached
2.1689
321,550.55
63,494.13
3,764.267
1,315.691
0.06
0.17
0.33
0.00128
0.00388
1.5361
true
true
true
1
1
16.88
33.76
+y
0.2446
{"+z": 0.2994, "-z": 0.3201, "+y": 0.2446, "-y": 0.2753, "+x": 0.6704, "-x": 0.6469}
true
0.000016
0.265691
0.620362
[ 0, 381, -1000 ]
70,000
arrays/00009.npz
{"feet": 4, "rounded": false, "W": 392.4, "D": 748.1, "H": 660.0, "lip": 328.1, "seatFront": 379.4, "seatRear": 298.7, "seatDepth": 405.0, "gapY": 432.4, "gapZ": 310.1, "backTopY": 708.9, "P": 39.2, "tp": 12.0, "footY": 100.3, "footX": 93.9, "rearFootY": 518.4}
[{"fraction": 1, "compliance": 0.265690716183511, "dmax": 0.0006541543364410124}, {"fraction": 0.9699978780045526, "compliance": 0.265715180568184, "dmax": 0.0006432735767661795}, {"fraction": 0.9408976040742313, "compliance": 0.265799745428656, "dmax": 0.0006429163364421734}, {"fraction": 0.912670241907481, "complianc...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 392.4}, {"name": "D", "value": 748.1}, {"name": "H", "value": 660.0}, {"name": "lip", "value": 328.1}, {"name": "seatFront", "value": 379.4}, {"name": "seatRear", "value": 298.7}, {"name": "seatDepth", "value": 405.0}, {"name": "gapY", "value": 432.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 392.4, D = 748.1, H = 660, lip = 328.1, seatFront = 379.4, seatRe...
00010
ok
null
beam
A steel S355 beam (machined or welded), within a 184 x 61 x 121 mm design space, held at 1 support face, carrying 118.86 kN straight down on 1 load face. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 2317.3, 0, -118836 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 28.753200593289527, 56.29545299010574 ] ]
[ [ 137.9456381598176, 28.753200593289527, 116.59090598021147 ] ]
1.8
[ 102, 34, 67 ]
[ -5.8, -1.8, -1.8 ]
0.25
0.25
0.0312
medium
55
27.4
target reached
1.2288
9,207.11
2,270.55
3.063
1.251
115.9
283.82
400.27
0.15842
0.53932
0.3672
false
false
false
1
1
3.6
3.6
+z
0.4361
{"+z": 0.4361, "-z": 0.6264, "+y": 0.7414, "-y": 0.7418, "+x": 0.6194, "-x": 0.5444}
true
0.000015
4.117749
13.588245
[ 39, 0, -2000 ]
210,000
arrays/00010.npz
{"kind": "cantilever", "L": 175.6, "W": 57.5, "H": 112.6, "pad_x": 117.0, "pad_len": 41.9, "foot": 19.8}
[{"fraction": 1, "compliance": 4.117748626677808, "dmax": 0.0026660838501655054}, {"fraction": 0.9700003938248267, "compliance": 4.118279393184563, "dmax": 0.0026414742240310147}, {"fraction": 0.9409016619407687, "compliance": 4.1229172581841125, "dmax": 0.002598406991174381}, {"fraction": 0.9126742674858223, "complian...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 175.6479163996245, "w": 57.506401186579055, "h": 112.59090598021147}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 57.50...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 175.6479164, 57.506401187, 112.590905...
00011
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 104 x 163 x 94 mm design space, held at 4 support faces, carrying 30.40 kN at 11 degrees from vertical on 1 load face. Keep 40% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -5610, -1581.5, -29840.5 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 17.667724706934816, 154.13176568150328, 19.159030216781264 ], [ 82.1097529421263, 154.13176568150328, 19.159030216781264 ], [ 17.667724706934816, 154.13176568150328, 70.60498863477729 ], [ 82.1097529421263, 154.13176568150328, 70.60498863477729 ] ]
[ [ 87.46063491245687, -4, 35.52670892706543 ] ]
1.89
[ 55, 86, 50 ]
[ -1.89, -5.89, -1.89 ]
0.4
0.4
0.0045
medium
39
21
target reached
1.9931
10,591.17
4,234.79
5.121
3.391
69.33
104.69
239.41
0.14422
0.17997
0.3251
true
true
true
1
1
7.56
11.34
+y
0.1213
{"+z": 0.5975, "-z": 0.5442, "+y": 0.1213, "-y": 0.319, "+x": 0.5182, "-x": 0.6844}
true
0.000005
4.734633
5.940992
[ -188, -53, -1000 ]
210,000
arrays/00011.npz
{"Wx": 99.8, "Dy": 150.1, "Hz": 89.8, "bolts": 4, "pad_on_top": false, "pad": [21.89451074524213, 24.684587027588023]}
[{"fraction": 1, "compliance": 4.734632635648949, "dmax": 0.004833101334090006}, {"fraction": 0.9700009792401096, "compliance": 4.735679292287407, "dmax": 0.004833858109636042}, {"fraction": 0.9409028593811203, "compliance": 4.738612627703452, "dmax": 0.004835838455962978}, {"fraction": 0.9126762632197415, "compliance"...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 99.77747764906113, "w": 150.13176568150328, "h": 89.76401885155856}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 11.973297317887335, "y": 150.13...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 99.777477649, 150.131765682, 89...
00012
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 472 x 905 x 736 mm design space, held at 4 support faces, carrying 2.10 kN at 19 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its spa...
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 686.7, -1984.6 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 78.6, 231.20000000000002, -12 ], [ 368.8, 231.20000000000002, -12 ], [ 78.6, 823, -12 ], [ 368.8, 823, -12 ] ]
[ [ 223.7, 278.05, 360.79999999999995 ], [ 223.7, 658.3, 529.05 ] ]
9.43
[ 50, 96, 78 ]
[ -9.43, -9.43, -21.43 ]
0.2
0.2
0.0721
medium
63
61
target reached
2.3358
452,420.36
89,148.5
7,516.779
2,994.339
0.04
0.09
0.18
0.00042
0.00138
1.8106
true
true
true
1
1
26.67
37.72
+y
0.219
{"+z": 0.3401, "-z": 0.3302, "+y": 0.219, "-y": 0.2998, "+x": 0.5683, "-x": 0.5632}
true
0.000008
0.143447
0.311664
[ 0, 346, -1000 ]
70,000
arrays/00012.npz
{"feet": 4, "rounded": true, "W": 447.4, "D": 884.2, "H": 697.7, "lip": 386.0, "seatFront": 420.7, "seatRear": 300.9, "seatDepth": 486.1, "gapY": 504.4, "gapZ": 360.4, "backTopY": 812.2, "P": 36.8, "tp": 12.0, "footY": 212.8, "footX": 60.2, "rearFootY": 804.6}
[{"fraction": 1, "compliance": 0.1434465964280807, "dmax": 0.00021041936196051277}, {"fraction": 0.9700005802595695, "compliance": 0.1434674171591501, "dmax": 0.00020790769240841764}, {"fraction": 0.9409005628517824, "compliance": 0.1434867894027921, "dmax": 0.0002074828988269369}, {"fraction": 0.9126757702945785, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 447.4}, {"name": "D", "value": 884.2}, {"name": "H", "value": 697.7}, {"name": "lip", "value": 386.0}, {"name": "seatFront", "value": 420.7}, {"name": "seatRear", "value": 300.9}, {"name": "seatDepth", "value": 486.1}, {"name": "gapY", "value": 504.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 447.4, D = 884.2, H = 697.7, lip = 386, seatFront = 420.7, seatRe...
00013
ok
null
beam
A steel S355 beam (machined or welded), within a 373 x 29 x 99 mm design space, held at 1 support face, carrying 5.07 kN straight down on 1 load face. Keep 20% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 106.4, 0, -5064.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 12.764281505098964, 45.26968160835462 ] ]
[ [ 294.2907216544668, 12.764281505098964, 94.53936321670923 ] ]
1.62
[ 230, 18, 61 ]
[ -5.62, -1.62, -1.62 ]
0.2
0.2
0.0138
medium
62
42.5
target reached
1.912
6,714.33
1,344.29
9.894
4.861
35.88
73.03
109.09
0.19508
0.43042
0.7452
true
true
true
1
1
3.24
6.48
-x
0.3524
{"+z": 0.6252, "-z": 0.6832, "+y": 0.6973, "-y": 0.6532, "+x": 0.4298, "-x": 0.3524}
true
0.000001
114.74394
299.742107
[ 42, 0, -2000 ]
210,000
arrays/00013.npz
{"kind": "cantilever", "L": 364.5, "W": 25.5, "H": 90.5, "pad_x": 277.4, "pad_len": 33.8, "foot": 13.4}
[{"fraction": 1, "compliance": 114.74393966110556, "dmax": 0.0770396510907697}, {"fraction": 0.9699992207589807, "compliance": 114.74516267382754, "dmax": 0.07652498011971373}, {"fraction": 0.934348944128419, "compliance": 114.74530133371871, "dmax": 0.0735567751701091}, {"fraction": 0.9063206187173692, "compliance": 1...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 364.5130871326707, "w": 25.528563010197928, "h": 90.53936321670923}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 25.528...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 364.513087133, 25.52856301, 90.539363...
00014
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 127 x 163 x 197 mm design space, held at 2 support faces, carrying 20.48 kN at 6 degrees from vertical on 1 load face. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 2097.7, -285.1, -20366.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 32.565272330335944, 157.71236884806632, 60.894723077391056 ], [ 88.40808789685605, 157.71236884806632, 60.894723077391056 ] ]
[ [ 67.12044565740155, 16.691422233801255, 189.7150729779056 ] ]
2.59
[ 49, 63, 76 ]
[ -2.59, -2.59, -2.59 ]
0.25
0.25
0.0076
medium
54
32.3
target reached
3.2249
27,236.77
6,851.9
10.357
7.014
34.28
50.62
66.83
0.13339
0.17041
0.3937
true
true
true
1
1
10.36
14.65
-z
0.2403
{"+z": 0.3541, "-z": 0.2403, "+y": 0.2698, "-y": 0.4556, "+x": 0.5349, "-x": 0.5251}
true
0.000007
4.568509
5.631229
[ 103, -14, -1000 ]
210,000
arrays/00014.npz
{"Wx": 121.0, "Dy": 153.7, "Hz": 185.7, "bolts": 2, "pad_on_top": true, "pad": [42.374788138308816, 33.38284446760251]}
[{"fraction": 1, "compliance": 4.5685094702099995, "dmax": 0.006549337898473425}, {"fraction": 0.9700022068018537, "compliance": 4.568866335884433, "dmax": 0.006549914324138655}, {"fraction": 0.9408184782875217, "compliance": 4.569222225154711, "dmax": 0.006551394340290255}, {"fraction": 0.9075987543829537, "compliance...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 120.97336022719199, "w": 153.71236884806632, "h": 185.7150729779056}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 14.516803227263038, "y": 153.7...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 120.973360227, 153.712368848, 1...
00015
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 484 x 856 x 809 mm design space, held at 4 support faces, carrying 2.10 kN at 17 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 601.6, -2012 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 160.55, 236.25, -12 ], [ 298.65, 236.25, -12 ], [ 160.55, 718.8499999999999, -12 ], [ 298.65, 718.8499999999999, -12 ] ]
[ [ 229.6, 231.4, 286.35 ], [ 229.6, 603.9000000000001, 527.9 ] ]
9.3
[ 52, 92, 87 ]
[ -9.3, -9.3, -21.3 ]
0.25
0.25
0.0843
coarse
55
48.8
target reached
2.303
712,665.47
177,084.67
23,600.862
10,041.668
0.04
0.09
0.21
0.00046
0.00107
1.7112
true
true
true
1
1
37.2
37.2
+y
0.2639
{"+z": 0.3679, "-z": 0.3396, "+y": 0.2639, "-y": 0.3291, "+x": 0.5516, "-x": 0.5806}
true
0.000004
0.17329
0.302824
[ 0, 299, -1000 ]
70,000
arrays/00015.npz
{"feet": 4, "rounded": false, "W": 459.2, "D": 832.1, "H": 778.3, "lip": 309.3, "seatFront": 320.8, "seatRear": 251.9, "seatDepth": 392.8, "gapY": 425.1, "gapZ": 277.5, "backTopY": 782.7, "P": 31.1, "tp": 12.0, "footY": 220.7, "footX": 145.0, "rearFootY": 703.3}
[{"fraction": 1, "compliance": 0.17329021494016703, "dmax": 0.0003757189428708723}, {"fraction": 0.9700006732776116, "compliance": 0.17331876027478213, "dmax": 0.0003740791924873903}, {"fraction": 0.9409006530792833, "compliance": 0.1733804385628256, "dmax": 0.0003723291831508097}, {"fraction": 0.9126758937760294, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 459.2}, {"name": "D", "value": 832.1}, {"name": "H", "value": 778.3}, {"name": "lip", "value": 309.3}, {"name": "seatFront", "value": 320.8}, {"name": "seatRear", "value": 251.9}, {"name": "seatDepth", "value": 392.8}, {"name": "gapY", "value": 425.1...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 459.2, D = 832.1, H = 778.3, lip = 309.3, seatFront = 320.8, seat...
00016
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 216 x 54 x 74 mm design space, held at 2 support faces, carrying 43.36 kN straight down on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 1018.8, 0, -43352.6 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 7.478246017727137, 25.4942896883009, -4 ], [ 204.07948509456295, 25.4942896883009, -4 ] ]
[ [ 154.8544107947543, 25.4942896883009, 65.82615584962551 ] ]
1.5
[ 144, 36, 49 ]
[ -1.5, -1.5, -5.5 ]
0.15
0.15
0.019
medium
72
39.3
target reached
1.9933
5,441.4
812.11
13.977
4.855
32.2
92.68
118.94
0.021
0.08549
0.432
true
true
true
1
1
3
6.71
+x
0.2075
{"+z": 0.5047, "-z": 0.5273, "+y": 0.7941, "-y": 0.7941, "+x": 0.2075, "-x": 0.2452}
true
0
1.539366
5.174596
[ 47, 0, -2000 ]
210,000
arrays/00016.npz
{"kind": "two feet", "L": 211.6, "W": 51.0, "H": 61.8, "pad_x": 136.9, "pad_len": 35.9, "foot": 15.0}
[{"fraction": 1, "compliance": 1.539366307413435, "dmax": 0.0008903746908984647}, {"fraction": 0.9693507683013574, "compliance": 1.539558127891127, "dmax": 0.0008905053472654215}, {"fraction": 0.9402702939714895, "compliance": 1.539973775204507, "dmax": 0.0008908190427615238}, {"fraction": 0.9120618928373072, "complian...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 211.55773111229007, "w": 50.9885793766018, "h": 61.8261558496255}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 14.95649203545...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 211.557731112, 50.988579377, 61.82615...
00017
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 197 x 204 x 207 mm design space, held at 4 support faces, carrying 93.07 kN at 9 degrees from vertical on 1 load face. Keep 20% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -12864.9, -7259.5, -91892 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 41.590733477205575, 195.41309978141035, 48.386591238412066 ], [ 146.9785121262331, 195.41309978141035, 48.386591238412066 ], [ 41.590733477205575, 195.41309978141035, 147.77452365238213 ], [ 146.9785121262331, 195.41309978141035, 147.77452365238213 ] ]
[ [ 89.81954310619462, 19.519703148115163, 200.16111489079418 ] ]
3.29
[ 60, 62, 63 ]
[ -3.29, -3.29, -3.29 ]
0.2
0.2
0.0132
coarse
63
31
target reached
2.0674
55,802.94
11,198.4
11.381
5.994
31.19
59.23
78.79
0.05979
0.13854
0.4145
true
true
true
1
1
6.58
19.74
+y
0.1952
{"+z": 0.2118, "-z": 0.4415, "+y": 0.1952, "-y": 0.4767, "+x": 0.6295, "-x": 0.606}
true
0.000003
0.505544
1.218555
[ -140, -79, -1000 ]
210,000
arrays/00017.npz
{"Wx": 188.6, "Dy": 191.4, "Hz": 196.2, "bolts": 4, "pad_on_top": true, "pad": [37.26553424810927, 39.039406296230325]}
[{"fraction": 1, "compliance": 0.5055441741988561, "dmax": 0.0006506648340126642}, {"fraction": 0.97000145694721, "compliance": 0.5057031996375565, "dmax": 0.000650892458894807}, {"fraction": 0.9409013646738866, "compliance": 0.5062931655705031, "dmax": 0.0006517201610602013}, {"fraction": 0.9126754407265311, "complian...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 188.56924560343867, "w": 191.41309978141035, "h": 196.16111489079418}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 22.62830947241264, "y": 191.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 188.569245603, 191.413099781, 1...
00018
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 536 x 814 x 862 mm design space, held at 3 support faces, carrying 2.10 kN at 19 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 674.2, -1988.8 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 51.8, 213.20000000000002, -12 ], [ 458.9, 213.20000000000002, -12 ], [ 255.35, 576.9, -12 ] ]
[ [ 255.35, 251.85, 339.2 ], [ 255.35, 590.55, 559.5 ] ]
9.58
[ 56, 85, 90 ]
[ -9.58, -9.58, -21.58 ]
0.3
0.3
0.0883
fine
48
44.4
target reached
2.6811
468,966.15
139,767.71
3,694.537
1,557.622
0.06
0.15
0.58
0.00254
0.00362
1.7244
true
true
true
1
1
38.32
38.32
+z
0.2299
{"+z": 0.2299, "-z": 0.2375, "+y": 0.3506, "-y": 0.373, "+x": 0.505, "-x": 0.5217}
true
0.000052
0.447167
0.559613
[ 0, 339, -1000 ]
70,000
arrays/00018.npz
{"feet": 3, "rounded": true, "W": 510.7, "D": 786.5, "H": 824.3, "lip": 381.4, "seatFront": 417.9, "seatRear": 260.5, "seatDepth": 433.7, "gapY": 463.7, "gapZ": 294.7, "backTopY": 717.4, "P": 37.6, "tp": 12.0, "footY": 194.4, "footX": 33.0, "rearFootY": 558.1}
[{"fraction": 1, "compliance": 0.4471667833176279, "dmax": 0.0012775033739579563}, {"fraction": 0.9700016482610846, "compliance": 0.447248769546815, "dmax": 0.0012777000715916314}, {"fraction": 0.9409001444652363, "compliance": 0.4473211627756059, "dmax": 0.001277764470872504}, {"fraction": 0.9126712494788586, "complia...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 510.7}, {"name": "D", "value": 786.5}, {"name": "H", "value": 824.3}, {"name": "lip", "value": 381.4}, {"name": "seatFront", "value": 417.9}, {"name": "seatRear", "value": 260.5}, {"name": "seatDepth", "value": 433.7}, {"name": "gapY", "value": 463.7...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 510.7, D = 786.5, H = 824.3, lip = 381.4, seatFront = 417.9, seat...
00019
ok
null
beam
A steel S355 beam (machined or welded), within a 213 x 51 x 83 mm design space, held at 2 support faces, carrying 138.28 kN at 7 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -16476, 0, -137299.7 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.972511687198573, 23.859826676280306, -4 ], [ 199.59774013658114, 23.859826676280306, -4 ] ]
[ [ 81.40545929606799, 23.859826676280306, 76.01957478257927 ] ]
1.54
[ 138, 33, 54 ]
[ -1.54, -1.54, -5.54 ]
0.1
0.1
0.022
medium
85
49.5
target reached
1.9023
5,750.62
578.63
4.057
0.86
87.51
412.89
495.86
0.05458
0.33819
0.425
false
true
false
1
1
3.08
6.89
-x
0.1865
{"+z": 0.4187, "-z": 0.4404, "+y": 0.6458, "-y": 0.6392, "+x": 0.2044, "-x": 0.1865}
true
0.000002
1.468295
7.670929
[ -240, 0, -2000 ]
210,000
arrays/00019.npz
{"kind": "two feet", "L": 208.6, "W": 47.7, "H": 72.0, "pad_x": 57.9, "pad_len": 47.1, "foot": 17.9}
[{"fraction": 1, "compliance": 1.468295096186644, "dmax": 0.0007949899230392206}, {"fraction": 0.9700006314633921, "compliance": 1.4683191763779058, "dmax": 0.0007950014235750929}, {"fraction": 0.940899883907884, "compliance": 1.4685545206893644, "dmax": 0.0007951308115804125}, {"fraction": 0.9126734702799326, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 208.57025182377973, "w": 47.71965335256061, "h": 72.01957478257927}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 17.945023374...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 208.570251824, 47.719653353, 72.01957...
00020
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 146 x 118 x 75 mm design space, held at 4 support faces, carrying 60.02 kN at 10 degrees from vertical on 1 load face. Keep 30% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 o...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 8860.6, 5907.1, -59070.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 25.87379046606816, 109.38804500611224, 19.541174728149365 ], [ 115.14424355335237, 109.38804500611224, 19.541174728149365 ], [ 25.87379046606816, 109.38804500611224, 51.05581423459505 ], [ 115.14424355335237, 109.38804500611224, 51.05581423459505 ] ]
[ [ 75.31081420345338, -4, 24.413287473494208 ] ]
1.74
[ 84, 68, 43 ]
[ -1.74, -5.74, -1.74 ]
0.3
0.3
0.0098
coarse
49
22
target reached
2.2549
8,450.22
2,528.81
3.315
2.215
135.74
203.2
331.62
0.19237
0.28298
0.2923
true
true
true
1
1
3.48
13.92
+y
0.2025
{"+z": 0.626, "-z": 0.5096, "+y": 0.2025, "-y": 0.4902, "+x": 0.514, "-x": 0.5447}
true
0.000014
2.913422
4.317401
[ 150, 100, -1000 ]
210,000
arrays/00020.npz
{"Wx": 141.0, "Dy": 105.4, "Hz": 70.6, "bolts": 4, "pad_on_top": false, "pad": [30.14621220054045, 20.580566802300723]}
[{"fraction": 1, "compliance": 2.9134224497007732, "dmax": 0.0029929024819754404}, {"fraction": 0.9700009296727062, "compliance": 2.9148857966966166, "dmax": 0.0029943613813001556}, {"fraction": 0.9409021739662284, "compliance": 2.918805728534899, "dmax": 0.002998251949413693}, {"fraction": 0.912674374795105, "complian...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 141.01803401942053, "w": 105.38804500611224, "h": 70.59698896274442}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 16.92216408233046, "y": 105.38...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 141.018034019, 105.388045006, 7...
00021
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 488 x 693 x 882 mm design space, held at 4 support faces, carrying 2.10 kN at 14 degrees from vertical on 2 load faces. Keep 40% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 495.9, -2040.6 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 94.2, 246, -12 ], [ 368.2, 246, -12 ], [ 94.2, 540.1, -12 ], [ 368.2, 540.1, -12 ] ]
[ [ 231.2, 234.9, 310.2 ], [ 231.2, 514.6, 585.2 ] ]
8.56
[ 57, 81, 103 ]
[ -8.56, -8.56, -20.560000000000002 ]
0.4
0.4
0.0892
medium
39
36.8
target reached
1.9655
334,528.28
133,076.68
4,444.67
2,542.527
0.05
0.09
0.25
0.00147
0.00221
1.7634
true
true
true
1
1
34.24
34.24
+z
0.3581
{"+z": 0.3581, "-z": 0.3872, "+y": 0.4345, "-y": 0.4156, "+x": 0.5234, "-x": 0.5359}
true
0
0.203394
0.260135
[ 0, 243, -1000 ]
70,000
arrays/00021.npz
{"feet": 4, "rounded": true, "W": 462.4, "D": 674.3, "H": 848.3, "lip": 311.3, "seatFront": 330.0, "seatRear": 290.4, "seatDepth": 399.8, "gapY": 429.2, "gapZ": 322.1, "backTopY": 600.0, "P": 37.4, "tp": 12.0, "footY": 227.3, "footX": 75.5, "rearFootY": 521.4}
[{"fraction": 1, "compliance": 0.20339401378803149, "dmax": 0.0007220316126686447}, {"fraction": 0.9700024078979052, "compliance": 0.20339791695234036, "dmax": 0.0007220438968079461}, {"fraction": 0.9409005538165182, "compliance": 0.20341685995225972, "dmax": 0.0007138214468433481}, {"fraction": 0.9126751745725982, "co...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 462.4}, {"name": "D", "value": 674.3}, {"name": "H", "value": 848.3}, {"name": "lip", "value": 311.3}, {"name": "seatFront", "value": 330.0}, {"name": "seatRear", "value": 290.4}, {"name": "seatDepth", "value": 399.8}, {"name": "gapY", "value": 429.2...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 462.4, D = 674.3, H = 848.3, lip = 311.3, seatFront = 330, seatRe...
00022
ok
null
beam
A steel S355 beam (machined or welded), within a 154 x 89 x 96 mm design space, held at 3 support faces, carrying 243.68 kN straight down on 1 load face. Keep 20% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -8766.8, 0, -243521 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 7.876401917660035, 42.14458646196867, -4 ], [ 142.26579234690527, 42.14458646196867, -4 ], [ 75.07109713228265, 42.14458646196867, -4 ] ]
[ [ 94.99353922693777, 42.14458646196867, 87.08329958015574 ] ]
1.75
[ 88, 51, 55 ]
[ -1.75, -1.75, -5.75 ]
0.2
0.2
0.0236
medium
62
30.4
target reached
2.1429
8,472.95
1,715.11
5.477
2.598
64.81
136.67
166.91
0.02646
0.06425
0.308
true
true
true
2
0.97871
3.5
7
+z
0.521
{"+z": 0.521, "-z": 0.6097, "+y": 0.8, "-y": 0.5891, "+x": 0.7427, "-x": 0.7217}
true
0.000001
0.369843
0.85263
[ -72, 0, -2000 ]
210,000
arrays/00022.npz
{"kind": "three feet", "L": 150.1, "W": 84.3, "H": 83.1, "pad_x": 77.0, "pad_len": 36.0, "foot": 15.8}
[{"fraction": 1, "compliance": 0.3698427296601129, "dmax": 0.00021733252687155435}, {"fraction": 0.9700001930800124, "compliance": 0.3698943768288856, "dmax": 0.0002173832758892012}, {"fraction": 0.9406665122026567, "compliance": 0.36993308647196965, "dmax": 0.0002174255141961979}, {"fraction": 0.9124478683966636, "com...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 150.1421942645653, "w": 84.28917292393734, "h": 83.08329958015574}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 15.7528038353...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 150.142194265, 84.289172924, 83.08329...
00023
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 115 x 219 x 195 mm design space, held at 2 support faces, carrying 25.74 kN at 9 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -3433.2, -1958.2, -25430.9 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 26.19932297487381, 208.94379761322827, 63.79361294051582 ], [ 81.24234822631988, 208.94379761322827, 63.79361294051582 ] ]
[ [ 72.78679182909072, -4, 46.881356022999775 ] ]
2.74
[ 42, 80, 71 ]
[ -2.74, -6.74, -2.74 ]
0.1
0.1
0.0043
medium
76
45
target reached
6.6778
32,436.85
3,309.79
4.806
1.772
73.87
200.29
257.75
0.6835
0.902
0.4384
true
false
false
1
1
9.49
13.42
+y
0.1101
{"+z": 0.3635, "-z": 0.3022, "+y": 0.1101, "-y": 0.3943, "+x": 0.5371, "-x": 0.5601}
true
0.000059
23.575034
34.598729
[ -135, -77, -1000 ]
210,000
arrays/00023.npz
{"Wx": 107.4, "Dy": 204.9, "Hz": 187.3, "bolts": 2, "pad_on_top": false, "pad": [12.892082066872545, 23.76245282538649]}
[{"fraction": 1, "compliance": 23.57503356269162, "dmax": 0.026863474424923157}, {"fraction": 0.969999904701095, "compliance": 23.57605321629928, "dmax": 0.026864821730786585}, {"fraction": 0.9409003840545872, "compliance": 23.593717508843437, "dmax": 0.02685790786663218}, {"fraction": 0.912672848388972, "compliance": ...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 107.44167120119367, "w": 204.94379761322827, "h": 187.34427316385074}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 12.89300054414324, "y": 204.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 107.441671201, 204.943797613, 1...
00024
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 470 x 749 x 759 mm design space, held at 3 support faces, carrying 2.10 kN at 19 degrees from vertical on 2 load faces. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its spa...
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 690.2, -1983.3 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 168.45000000000002, 156.25, -12 ], [ 282.45, 156.25, -12 ], [ 225.45, 582.75, -12 ] ]
[ [ 225.45, 201, 386.9 ], [ 225.45, 525.45, 556.15 ] ]
9.03
[ 52, 83, 84 ]
[ -9.03, -9.03, -21.03 ]
0.1
0.1
0.0658
medium
84
83.9
target reached
1.696
397,087.87
37,696.97
4,586.258
665.568
0.06
0.41
0.7
0.0016
0.03369
1.517
true
true
true
3
0.99534
25.54
36.12
+y
0.2065
{"+z": 0.3259, "-z": 0.3106, "+y": 0.2065, "-y": 0.2634, "+x": 0.6225, "-x": 0.6097}
true
0.000023
0.350818
2.178842
[ 0, 348, -1000 ]
70,000
arrays/00024.npz
{"feet": 3, "rounded": true, "W": 450.9, "D": 727.5, "H": 724.1, "lip": 388.5, "seatFront": 429.7, "seatRear": 344.1, "seatDepth": 332.0, "gapY": 367.3, "gapZ": 388.2, "backTopY": 683.6, "P": 38.1, "tp": 12.0, "footY": 137.2, "footX": 149.4, "rearFootY": 563.7}
[{"fraction": 1, "compliance": 0.35081782722379695, "dmax": 0.0007960320136022981}, {"fraction": 0.9699986898991222, "compliance": 0.3509079794134721, "dmax": 0.0007958292625257103}, {"fraction": 0.9408998937362621, "compliance": 0.3511093569986907, "dmax": 0.0007871146876746063}, {"fraction": 0.9126744981585805, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 450.9}, {"name": "D", "value": 727.5}, {"name": "H", "value": 724.1}, {"name": "lip", "value": 388.5}, {"name": "seatFront", "value": 429.7}, {"name": "seatRear", "value": 344.1}, {"name": "seatDepth", "value": 332.0}, {"name": "gapY", "value": 367.3...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 450.9, D = 727.5, H = 724.1, lip = 388.5, seatFront = 429.7, seat...
00025
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 377 x 69 x 56 mm design space, held at 2 support faces, carrying 26.01 kN at 8 degrees from vertical on 1 load face. Keep 40% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -3821.1, 0, -25731.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 5.546371378427423, 32.015262322382725, -4 ], [ 366.1553176043057, 32.015262322382725, -4 ] ]
[ [ 213.83841404954, 32.015262322382725, 48.5930453715331 ] ]
1.76
[ 214, 39, 32 ]
[ -1.76, -1.76, -5.76 ]
0.4
0.4
0.0282
coarse
40
28.8
target reached
1.6551
8,692.72
3,498.62
9.006
6.243
49.97
72.08
105.91
0.11903
0.18081
0.7533
true
true
true
1
1
10.56
14.08
-x
0.1247
{"+z": 0.7174, "-z": 0.7222, "+y": 0.7592, "-y": 0.6215, "+x": 0.144, "-x": 0.1247}
true
0.000003
16.221136
24.35115
[ -297, 0, -2000 ]
210,000
arrays/00025.npz
{"kind": "two feet", "L": 371.7, "W": 64.0, "H": 44.6, "pad_x": 176.2, "pad_len": 75.3, "foot": 11.1}
[{"fraction": 1, "compliance": 16.22113554330428, "dmax": 0.008502904423425248}, {"fraction": 0.969731609383105, "compliance": 16.253126606081373, "dmax": 0.008522133668287702}, {"fraction": 0.9406399492805133, "compliance": 16.318767427040992, "dmax": 0.00855665107707956}, {"fraction": 0.9124224318456898, "compliance"...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 371.7016889827331, "w": 64.03052464476545, "h": 44.5930453715331}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 11.09274275685...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 371.701688983, 64.030524645, 44.59304...
00026
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 88 x 163 x 95 mm design space, held at 2 support faces, carrying 10.69 kN at 6 degrees from vertical on 1 load face. Keep 15% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 1126.5, -265.7, -10627.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 15.338094382415573, 159.21876233077137, 43.08407854712498 ], [ 68.56511304419881, 159.21876233077137, 43.08407854712498 ] ]
[ [ 54.30459014404615, 8.157345664137491, 91.2398190597309 ] ]
1.79
[ 49, 91, 53 ]
[ -1.79, -1.79, -1.79 ]
0.15
0.1512
0.0026
fine
63
52.7
target reached
5.9768
8,937.15
1,357.55
3.334
0.854
106.47
415.5
917.49
3.59294
3.97854
0.3258
false
false
false
1
1
3.58
7.16
-z
0.3589
{"+z": 0.3835, "-z": 0.3589, "+y": 0.6857, "-y": 0.4794, "+x": 0.4705, "-x": 0.5253}
true
0.000434
309.471091
340.874142
[ 106, -25, -1000 ]
210,000
arrays/00026.npz
{"Wx": 83.9, "Dy": 155.2, "Hz": 87.2, "bolts": 2, "pad_on_top": true, "pad": [20.217495554352638, 16.314691328274982]}
[{"fraction": 1, "compliance": 309.4710911259227, "dmax": 0.33886836868870346}, {"fraction": 0.9700000498089826, "compliance": 309.62167951449686, "dmax": 0.3390365231809867}, {"fraction": 0.9409016422021548, "compliance": 309.80532656173665, "dmax": 0.3392408937450229}, {"fraction": 0.9126748917899854, "compliance": 3...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 83.90320742661439, "w": 155.21876233077137, "h": 87.2398190597309}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 10.068384891193727, "y": 155.218...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 83.903207427, 155.218762331, 87...
00027
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 408 x 843 x 799 mm design space, held at 3 support faces, carrying 2.10 kN at 22 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 785, -1947.8 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 92.85, 275.55, -12 ], [ 293.34999999999997, 275.55, -12 ], [ 193.1, 574.9499999999999, -12 ] ]
[ [ 193.1, 280.1, 310.9 ], [ 193.1, 622.95, 520.25 ] ]
8.69
[ 47, 97, 92 ]
[ -8.69, -8.69, -20.689999999999998 ]
0.2
0.2
0.0805
coarse
62
57.8
target reached
2.8899
350,314.65
69,258.11
2,726.042
844.895
0.08
0.27
0.79
0.00381
0.00841
1.6859
true
true
true
1
1
34.76
34.76
+y
0.3554
{"+z": 0.4071, "-z": 0.3971, "+y": 0.3554, "-y": 0.3901, "+x": 0.6429, "-x": 0.6171}
true
0.000034
0.670905
1.174257
[ 0, 403, -1000 ]
70,000
arrays/00027.npz
{"feet": 3, "rounded": false, "W": 386.2, "D": 818.6, "H": 763.0, "lip": 301.2, "seatFront": 356.4, "seatRear": 265.4, "seatDepth": 490.2, "gapY": 508.0, "gapZ": 277.5, "backTopY": 737.9, "P": 34.1, "tp": 12.0, "footY": 258.5, "footX": 75.8, "rearFootY": 557.9}
[{"fraction": 1, "compliance": 0.6709052415282982, "dmax": 0.0019581718472585206}, {"fraction": 0.9699977560384052, "compliance": 0.6709168191313677, "dmax": 0.001958259695272977}, {"fraction": 0.9408978711011168, "compliance": 0.6709596083617462, "dmax": 0.0019584386046442854}, {"fraction": 0.9126716988699027, "compli...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 386.2}, {"name": "D", "value": 818.6}, {"name": "H", "value": 763.0}, {"name": "lip", "value": 301.2}, {"name": "seatFront", "value": 356.4}, {"name": "seatRear", "value": 265.4}, {"name": "seatDepth", "value": 490.2}, {"name": "gapY", "value": 508.0...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 386.2, D = 818.6, H = 763, lip = 301.2, seatFront = 356.4, seatRe...
00028
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 380 x 52 x 100 mm design space, held at 1 support face, carrying 8.80 kN straight down on 1 load face. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -149.6, 0, -8800 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 23.510575525403773, 45.389047306333495 ] ]
[ [ 340.082714159813, 23.510575525403773, 94.77809461266699 ] ]
2
[ 190, 26, 50 ]
[ -6, -2, -2 ]
0.25
0.25
0.0208
fine
55
39.1
target reached
1.8059
12,872.96
3,171.85
11.478
6.307
39.2
71.35
107.95
0.2521
0.59353
0.76
true
true
true
1
1
4
4
-x
0.3982
{"+z": 0.6572, "-z": 0.6801, "+y": 0.7775, "-y": 0.7429, "+x": 0.4892, "-x": 0.3982}
true
0.000042
91.338519
205.269319
[ -34, 0, -2000 ]
210,000
arrays/00028.npz
{"kind": "cantilever", "L": 370.4, "W": 47.0, "H": 90.8, "pad_x": 311.1, "pad_len": 58.0, "foot": 10.2}
[{"fraction": 1, "compliance": 91.33851904709718, "dmax": 0.052650346724459125}, {"fraction": 0.9700015315108355, "compliance": 91.41596712626665, "dmax": 0.052581048902865066}, {"fraction": 0.9409028256374914, "compliance": 91.49129040288213, "dmax": 0.052701003575065464}, {"fraction": 0.9126751665518034, "compliance"...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 370.36619122542606, "w": 47.021151050807546, "h": 90.77809461266699}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 47.02...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 370.366191225, 47.021151051, 90.77809...
00029
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 182 x 205 x 72 mm design space, held at 4 support faces, carrying 22.26 kN at 10 degrees from vertical on 1 load face. Keep 20% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 o...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 2321.3, 3241.1, -21899.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 27.184034641689117, 195.66977957346876, 15.959302650899684 ], [ 149.96479244401863, 195.66977957346876, 15.959302650899684 ], [ 27.184034641689117, 195.66977957346876, 50.92821241240361 ], [ 149.96479244401863, 195.66977957346876, 50.92821241240361 ] ]
[ [ 52.50274531112668, -4, 22.401284000334986 ] ]
2.25
[ 81, 91, 32 ]
[ -2.25, -6.25, -2.25 ]
0.2
0.2
0.0048
medium
62
43.7
target reached
3.1639
18,234.99
3,646.56
6.603
3.314
68.15
135.78
260.89
0.34097
0.54711
0.4095
true
false
false
1
1
4.5
9
+y
0.2261
{"+z": 0.6973, "-z": 0.6776, "+y": 0.2261, "-y": 0.3787, "+x": 0.5381, "-x": 0.5085}
true
0.000061
14.133719
22.338449
[ 106, 148, -1000 ]
210,000
arrays/00029.npz
{"Wx": 177.1, "Dy": 191.7, "Hz": 66.9, "bolts": 4, "pad_on_top": false, "pad": [39.843585083715865, 35.51639827107273]}
[{"fraction": 1, "compliance": 14.133718720510167, "dmax": 0.014305832174850883}, {"fraction": 0.9700014676385695, "compliance": 14.144619133419967, "dmax": 0.014318504478214387}, {"fraction": 0.940037180177095, "compliance": 14.173372514168014, "dmax": 0.014345123460757798}, {"fraction": 0.9118340589990704, "complianc...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 177.14882708570772, "w": 191.66977957346876, "h": 66.8875150633033}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 21.257859250284927, "y": 191.66...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 177.148827086, 191.669779573, 6...
00030
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 450 x 676 x 842 mm design space, held at 3 support faces, carrying 2.10 kN at 14 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 509.3, -2037.3 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 74.2, 92.2, -12 ], [ 357.90000000000003, 92.2, -12 ], [ 216.05, 580.1, -12 ] ]
[ [ 216.05, 217.2, 339.2 ], [ 216.05, 499.7, 542.3 ] ]
8.34
[ 54, 81, 101 ]
[ -8.34, -8.34, -20.34 ]
0.2
0.2
0.0911
fine
63
70.5
target reached
2.8126
514,437.85
100,143.14
12,629.253
4,234.003
0.07
0.21
0.49
0.00099
0.00221
1.6847
true
true
true
1
1
28.89
33.36
-z
0.2057
{"+z": 0.2083, "-z": 0.2057, "+y": 0.4278, "-y": 0.4527, "+x": 0.5408, "-x": 0.5594}
true
0.000014
0.322805
0.589578
[ 0, 250, -1000 ]
70,000
arrays/00030.npz
{"feet": 3, "rounded": true, "W": 432.1, "D": 657.6, "H": 812.6, "lip": 357.5, "seatFront": 417.0, "seatRear": 261.4, "seatDepth": 364.4, "gapY": 380.4, "gapZ": 272.0, "backTopY": 619.0, "P": 34.4, "tp": 12.0, "footY": 75.0, "footX": 57.0, "rearFootY": 562.9}
[{"fraction": 1, "compliance": 0.3228046417884138, "dmax": 0.0007879736808973398}, {"fraction": 0.9700020229849625, "compliance": 0.32285446161571474, "dmax": 0.0007879952809078369}, {"fraction": 0.9408999393104511, "compliance": 0.3230561581130784, "dmax": 0.000786677914672814}, {"fraction": 0.9126744824530137, "compl...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 432.1}, {"name": "D", "value": 657.6}, {"name": "H", "value": 812.6}, {"name": "lip", "value": 357.5}, {"name": "seatFront", "value": 417.0}, {"name": "seatRear", "value": 261.4}, {"name": "seatDepth", "value": 364.4}, {"name": "gapY", "value": 380.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 432.1, D = 657.6, H = 812.6, lip = 357.5, seatFront = 417, seatRe...
00031
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 344 x 92 x 104 mm design space, held at 2 support faces, carrying 118.11 kN straight down on 1 load face. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -7308.7, 0, -117882.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.0690869024979, 43.26715795102679, -4 ], [ 328.92398000162746, 43.26715795102679, -4 ] ]
[ [ 96.62375693258085, 43.26715795102679, 93.59392042055363 ] ]
2.37
[ 145, 39, 44 ]
[ -2.37, -2.37, -6.37 ]
0.25
0.2497
0.0223
fine
54
33.3
target reached
1.8682
21,201.7
5,356.99
12.475
6.371
36.07
70.63
94.27
0.04356
0.10179
0.6873
true
true
true
1
1
4.74
17.09
-x
0.0759
{"+z": 0.461, "-z": 0.5399, "+y": 0.6981, "-y": 0.5269, "+x": 0.189, "-x": 0.0759}
true
0.000001
1.151885
2.440199
[ -124, 0, -2000 ]
210,000
arrays/00031.npz
{"kind": "two feet", "L": 337.0, "W": 86.5, "H": 89.6, "pad_x": 59.3, "pad_len": 74.7, "foot": 16.1}
[{"fraction": 1, "compliance": 1.15188460653019, "dmax": 0.0006792103553450887}, {"fraction": 0.9686715893612445, "compliance": 1.1520092786921021, "dmax": 0.0006793105332452416}, {"fraction": 0.9396133534064569, "compliance": 1.1523017662890849, "dmax": 0.0006795351588720819}, {"fraction": 0.9114249528042632, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 336.9930669041254, "w": 86.53431590205358, "h": 89.59392042055363}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 16.1381738049...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 336.993066904, 86.534315902, 89.59392...
00032
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 191 x 112 x 206 mm design space, held at 2 support faces, carrying 70.34 kN at 10 degrees from vertical on 1 load face. Keep 10% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 ...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -969, -12527.4, -69212.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 42.9495989203577, 101.5504691384377, 82.08306176456466 ], [ 139.93400196091284, 101.5504691384377, 82.08306176456466 ] ]
[ [ 133.04610813123324, -4, 57.42281631246738 ] ]
2.61
[ 73, 43, 79 ]
[ -2.61, -6.609999999999999, -2.61 ]
0.1
0.1
0.0085
coarse
88
37.3
target reached
5.2945
28,563.55
2,848.83
6.211
2.279
72.45
197.46
244.77
0.1617
0.30659
0.4124
true
true
true
2
0.95872
10.44
10.44
+z
0.3756
{"+z": 0.3756, "-z": 0.4196, "+y": 0.4704, "-y": 0.743, "+x": 0.5501, "-x": 0.5454}
true
0.00002
1.951224
3.695127
[ -14, -181, -1000 ]
210,000
arrays/00032.npz
{"Wx": 182.9, "Dy": 97.6, "Hz": 199.5, "bolts": 2, "pad_on_top": false, "pad": [12.157816827098136, 14.783317087381159]}
[{"fraction": 1, "compliance": 1.9512242173246253, "dmax": 0.002147093388080703}, {"fraction": 0.9699986886265063, "compliance": 1.9513925701954502, "dmax": 0.002147269077428702}, {"fraction": 0.9409007678820347, "compliance": 1.9518167274793774, "dmax": 0.0021477175102314174}, {"fraction": 0.9110305938579151, "complia...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 182.88360088127052, "w": 97.5504691384377, "h": 199.50883036832334}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 21.94603210575246, "y": 97.5504...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 182.883600881, 97.550469138, 19...
00033
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 588 x 934 x 872 mm design space, held at 3 support faces, carrying 2.10 kN straight down on 2 load faces. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its spa...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 148.7, -2094.7 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 70.15, 161.95, -12 ], [ 492.05000000000007, 161.95, -12 ], [ 281.1, 577.65, -12 ] ]
[ [ 281.1, 300.75, 352.5 ], [ 281.1, 711.45, 584.3 ] ]
10.5
[ 56, 89, 83 ]
[ -10.5, -10.5, -22.5 ]
0.25
0.25
0.0889
medium
55
49.6
target reached
3.1267
1,037,369.05
254,068.01
18,728.573
7,399.293
0.05
0.12
0.37
0.00133
0.00237
1.869
true
true
true
1
1
42
42
+y
0.2801
{"+z": 0.3221, "-z": 0.362, "+y": 0.2801, "-y": 0.3286, "+x": 0.5375, "-x": 0.5243}
true
0.000027
0.347772
0.454142
[ 0, 71, -1000 ]
70,000
arrays/00033.npz
{"feet": 3, "rounded": false, "W": 562.2, "D": 911.9, "H": 834.1, "lip": 362.6, "seatFront": 400.3, "seatRear": 304.7, "seatDepth": 531.5, "gapY": 553.7, "gapZ": 334.5, "backTopY": 869.2, "P": 34.5, "tp": 12.0, "footY": 144.7, "footX": 52.9, "rearFootY": 560.4}
[{"fraction": 1, "compliance": 0.34777217958488316, "dmax": 0.0010364144222128645}, {"fraction": 0.9700003372372561, "compliance": 0.34780161460075837, "dmax": 0.0010366390957699478}, {"fraction": 0.9409015797156608, "compliance": 0.3478469687330573, "dmax": 0.001036676535202638}, {"fraction": 0.9126748213846961, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 562.2}, {"name": "D", "value": 911.9}, {"name": "H", "value": 834.1}, {"name": "lip", "value": 362.6}, {"name": "seatFront", "value": 400.3}, {"name": "seatRear", "value": 304.7}, {"name": "seatDepth", "value": 531.5}, {"name": "gapY", "value": 553.7...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 562.2, D = 911.9, H = 834.1, lip = 362.6, seatFront = 400.3, seat...
00034
failed
ValueError: the carve cut the load off from the supports (the member between them was removed)
beam
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
{"kind": "cantilever", "L": 414.7, "W": 31.3, "H": 37.0, "pad_x": 261.1, "pad_len": 26.1, "foot": 19.0}
null
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 414.6705618485567, "w": 31.277334265701466, "h": 36.9818496587792}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -10.4, "y": 0, "z": 0, "l": 10.4, "w": 31.27...
null
00035
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 110 x 130 x 179 mm design space, held at 2 support faces, carrying 23.30 kN at 7 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 o...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 2403.2, -1710, -23108 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 27.685785192996956, 124.82140288576477, 29.714876519176872 ], [ 77.09888142989546, 124.82140288576477, 29.714876519176872 ] ]
[ [ 67.79350076201482, 11.411631633679429, 174.5154938685357 ] ]
2.21
[ 50, 59, 81 ]
[ -2.21, -2.21, -2.21 ]
0.1
0.1
0.0093
medium
92
42.3
target reached
4.1897
17,355.18
1,743.15
7.268
3.414
61.91
131.81
172.8
0.24028
0.60632
0.358
true
false
false
1
1
4.42
9.88
+y
0.2926
{"+z": 0.4196, "-z": 0.3215, "+y": 0.2926, "-y": 0.4652, "+x": 0.5251, "-x": 0.5861}
true
0.000002
6.226275
14.795892
[ 104, -74, -1000 ]
210,000
arrays/00035.npz
{"Wx": 104.8, "Dy": 120.8, "Hz": 170.5, "bolts": 2, "pad_on_top": true, "pad": [37.86015718544965, 22.823263267358858]}
[{"fraction": 1, "compliance": 6.226274844759491, "dmax": 0.009556470527762486}, {"fraction": 0.9699967124983079, "compliance": 6.226899767032087, "dmax": 0.009557620520802546}, {"fraction": 0.9408926534006304, "compliance": 6.227889166193408, "dmax": 0.009561471744828036}, {"fraction": 0.9116967376380267, "compliance"...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 104.78466662289242, "w": 120.82140288576477, "h": 170.5154938685357}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 12.57415999474709, "y": 120.82...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 104.784666623, 120.821402886, 1...
00036
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 469 x 911 x 782 mm design space, held at 3 support faces, carrying 2.10 kN at 6 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 202.7, -2090.2 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 127.15, 287.25, -12 ], [ 317.54999999999995, 287.25, -12 ], [ 222.35, 565.35, -12 ] ]
[ [ 222.35, 260.1, 279.25 ], [ 222.35, 643.05, 511.79999999999995 ] ]
9.2
[ 51, 99, 85 ]
[ -9.2, -9.2, -21.2 ]
0.3
0.3
0.0799
fine
48
44.1
target reached
2.7585
420,478.54
126,432.92
5,132.596
2,346.172
0.05
0.12
0.41
0.00242
0.0033
1.8216
true
true
true
1
1
36.8
36.8
+z
0.2643
{"+z": 0.2643, "-z": 0.3179, "+y": 0.2866, "-y": 0.3439, "+x": 0.5128, "-x": 0.5116}
true
0.000081
0.294189
0.354683
[ 0, 97, -1000 ]
70,000
arrays/00036.npz
{"feet": 3, "rounded": true, "W": 444.7, "D": 890.3, "H": 749.3, "lip": 304.1, "seatFront": 327.6, "seatRear": 230.9, "seatDepth": 450.2, "gapY": 485.2, "gapZ": 274.3, "backTopY": 800.9, "P": 34.5, "tp": 12.0, "footY": 270.0, "footX": 109.9, "rearFootY": 548.1}
[{"fraction": 1, "compliance": 0.29418922021931887, "dmax": 0.0011421534321660206}, {"fraction": 0.9700009162234235, "compliance": 0.2941964166443396, "dmax": 0.0011422106848654652}, {"fraction": 0.9408987669561611, "compliance": 0.29423360528986514, "dmax": 0.0011423557699014647}, {"fraction": 0.9126694410554894, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 444.7}, {"name": "D", "value": 890.3}, {"name": "H", "value": 749.3}, {"name": "lip", "value": 304.1}, {"name": "seatFront", "value": 327.6}, {"name": "seatRear", "value": 230.9}, {"name": "seatDepth", "value": 450.2}, {"name": "gapY", "value": 485.2...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 444.7, D = 890.3, H = 749.3, lip = 304.1, seatFront = 327.6, seat...
00037
ok
null
beam
A steel S355 beam (machined or welded), within a 241 x 45 x 97 mm design space, held at 3 support faces, carrying 203.90 kN at 6 degrees from vertical on 1 load face. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 21191.9, 0, -202793.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 6.728231678009519, 20.817061010424066, -4 ], [ 230.30179248193247, 20.817061010424066, -4 ], [ 118.515012079971, 20.817061010424066, -4 ] ]
[ [ 162.33455874304133, 20.817061010424066, 88.81276488125204 ] ]
1.62
[ 149, 28, 60 ]
[ -1.62, -1.62, -5.62 ]
0.25
0.25
0.0202
fine
55
29.8
target reached
2.7064
6,697.85
1,674.58
3.113
2.04
114.02
173.99
223.29
0.04877
0.07127
0.4828
true
true
true
2
0.99095
3.24
3.24
+z
0.3698
{"+z": 0.3698, "-z": 0.4942, "+y": 0.9657, "-y": 0.8991, "+x": 0.5335, "-x": 0.5412}
true
0
0.870295
1.286209
[ 209, 0, -2000 ]
210,000
arrays/00037.npz
{"kind": "three feet", "L": 237.0, "W": 41.6, "H": 84.8, "pad_x": 134.2, "pad_len": 56.2, "foot": 13.5}
[{"fraction": 1, "compliance": 0.8702954888575574, "dmax": 0.00048099286070341226}, {"fraction": 0.9699978718464634, "compliance": 0.8703366444843278, "dmax": 0.00048104564599740264}, {"fraction": 0.9409002089459836, "compliance": 0.8704550113279342, "dmax": 0.00048115688411959996}, {"fraction": 0.9126731543104782, "co...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 237.030024159942, "w": 41.63412202084813, "h": 84.81276488125204}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 13.45646335601...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 237.03002416, 41.634122021, 84.812764...
00038
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 110 x 84 x 124 mm design space, held at 2 support faces, carrying 6.62 kN straight down on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 238, -251.2, -6611.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 21.84120241046903, 79.76338061638639, 67.08216277529596 ], [ 83.90470329306093, 79.76338061638639, 67.08216277529596 ] ]
[ [ 79.58828927788369, 10.9840953965375, 119.12195770545725 ] ]
1.67
[ 66, 50, 74 ]
[ -1.67, -1.67, -1.67 ]
0.15
0.15
0.007
medium
60
34.6
target reached
5.5248
7,284.6
1,090.71
12.543
5.641
28.3
62.93
86.49
0.10215
0.12047
0.2472
true
true
true
1
1
3.34
7.47
+y
0.2383
{"+z": 0.3155, "-z": 0.3813, "+y": 0.2383, "-y": 0.4431, "+x": 0.3582, "-x": 0.4323}
true
0.000042
10.590148
12.80203
[ 36, -38, -1000 ]
210,000
arrays/00038.npz
{"Wx": 105.7, "Dy": 75.8, "Hz": 115.1, "bolts": 2, "pad_on_top": true, "pad": [34.22117994284838, 21.968190793075]}
[{"fraction": 1, "compliance": 10.590147560032127, "dmax": 0.015439224545244858}, {"fraction": 0.97, "compliance": 10.591571043039512, "dmax": 0.015137283913671352}, {"fraction": 0.9408997555012225, "compliance": 10.5961441776256, "dmax": 0.015466121796356551}, {"fraction": 0.9126748166259169, "compliance": 10.60474050...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 105.74590570352997, "w": 75.76338061638639, "h": 115.12195770545725}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 12.689508684423595, "y": 75.76...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 105.745905704, 75.763380616, 11...
00039
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 593 x 820 x 800 mm design space, held at 3 support faces, carrying 2.10 kN at 25 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 877.6, -1907.8 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 61.5, 203.7, -12 ], [ 509.79999999999995, 203.7, -12 ], [ 285.65, 657, -12 ] ]
[ [ 285.65, 266.45, 367.3 ], [ 285.65, 614.55, 561.2 ] ]
9.88
[ 60, 83, 81 ]
[ -9.88, -9.88, -21.880000000000003 ]
0.25
0.25
0.0797
fine
54
51.1
target reached
3.0659
854,541.82
212,046.13
16,974.182
6,803.125
0.05
0.13
0.43
0.00125
0.00184
1.6401
true
true
true
1
1
19.76
39.52
+z
0.2934
{"+z": 0.2934, "-z": 0.3171, "+y": 0.304, "-y": 0.3728, "+x": 0.5487, "-x": 0.5437}
true
0
0.489061
0.64285
[ 0, 460, -1000 ]
70,000
arrays/00039.npz
{"feet": 3, "rounded": true, "W": 571.3, "D": 794.2, "H": 760.8, "lip": 376.2, "seatFront": 421.1, "seatRear": 313.5, "seatDepth": 462.9, "gapY": 494.5, "gapZ": 361.6, "backTopY": 734.6, "P": 32.0, "tp": 12.0, "footY": 187.7, "footX": 45.5, "rearFootY": 641.0}
[{"fraction": 1, "compliance": 0.48906092142885377, "dmax": 0.0010682536527699465}, {"fraction": 0.9699983136999831, "compliance": 0.48909891996071114, "dmax": 0.0010521689987412158}, {"fraction": 0.9408975934089759, "compliance": 0.4892528324027314, "dmax": 0.0010528500938062387}, {"fraction": 0.9126689311266893, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 571.3}, {"name": "D", "value": 794.2}, {"name": "H", "value": 760.8}, {"name": "lip", "value": 376.2}, {"name": "seatFront", "value": 421.1}, {"name": "seatRear", "value": 313.5}, {"name": "seatDepth", "value": 462.9}, {"name": "gapY", "value": 494.5...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 571.3, D = 794.2, H = 760.8, lip = 376.2, seatFront = 421.1, seat...
00040
ok
null
beam
A steel S355 beam (machined or welded), within a 379 x 81 x 109 mm design space, held at 2 support faces, carrying 105.71 kN straight down on 1 load face. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -3169.8, 0, -105660.6 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.094110693430142, 37.36214674391257, -4 ], [ 366.05725901286695, 37.36214674391257, -4 ] ]
[ [ 242.23520865164605, 37.36214674391257, 98.0496838631721 ] ]
2.37
[ 160, 34, 46 ]
[ -2.37, -2.37, -6.37 ]
0.3
0.3
0.0168
medium
48
30.6
target reached
1.74
20,936.09
6,403.42
8.934
4.683
39.74
75.81
112.9
0.05516
0.10992
0.7584
true
true
true
1
1
4.74
25.53
+x
0.064
{"+z": 0.5456, "-z": 0.5461, "+y": 0.8964, "-y": 0.779, "+x": 0.064, "-x": 0.1015}
true
0
1.886734
3.545162
[ -60, 0, -2000 ]
210,000
arrays/00040.npz
{"kind": "two feet", "L": 374.2, "W": 74.7, "H": 94.0, "pad_x": 194.8, "pad_len": 94.9, "foot": 16.2}
[{"fraction": 1, "compliance": 1.886734237585088, "dmax": 0.00104408505967754}, {"fraction": 0.9699984693096586, "compliance": 1.886911341113676, "dmax": 0.0010441916652857881}, {"fraction": 0.9408962191948569, "compliance": 1.8874212819930245, "dmax": 0.0010444769995865578}, {"fraction": 0.9126693326190112, "complianc...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 374.1513697062971, "w": 74.72429348782514, "h": 94.0496838631721}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 16.18822138686...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 374.151369706, 74.724293488, 94.04968...
00041
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 194 x 136 x 194 mm design space, held at 2 support faces, carrying 76.50 kN at 8 degrees from vertical on 1 load face. Keep 20% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 o...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 6893.5, 8105.5, -75752.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 37.34556140451194, 128.25982197088848, 92.01707152121527 ], [ 148.85819456545303, 128.25982197088848, 92.01707152121527 ] ]
[ [ 141.6653772067085, 14.60323140706023, 187.73972639536734 ] ]
2.77
[ 70, 49, 70 ]
[ -2.77, -2.77, -2.77 ]
0.2
0.2
0.0084
coarse
60
35.6
target reached
4.1355
34,130.52
6,883.61
4.34
2.113
103.7
212.97
338.22
0.49627
0.61641
0.3878
true
false
false
1
1
5.54
16.62
+y
0.2978
{"+z": 0.3063, "-z": 0.3647, "+y": 0.2978, "-y": 0.5874, "+x": 0.3351, "-x": 0.3628}
true
0.000018
3.919244
4.699006
[ 91, 107, -1000 ]
210,000
arrays/00041.npz
{"Wx": 186.2, "Dy": 124.3, "Hz": 183.7, "bolts": 2, "pad_on_top": true, "pad": [65.85604399887771, 29.20646281412046]}
[{"fraction": 1, "compliance": 3.9192441855040006, "dmax": 0.006019621144083586}, {"fraction": 0.9699984447598126, "compliance": 3.9198164568013625, "dmax": 0.006020729887414363}, {"fraction": 0.9409008728785552, "compliance": 3.922104827271418, "dmax": 0.006025194633936906}, {"fraction": 0.9126732634771283, "complianc...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 186.20375596996496, "w": 124.2598219708885, "h": 183.73972639536734}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 22.344450716395794, "y": 124.2...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 186.20375597, 124.259821971, 18...
00042
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 485 x 787 x 796 mm design space, held at 3 support faces, carrying 2.10 kN at 26 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 924, -1885.8 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 162.4, 70.9, -12 ], [ 296.20000000000005, 70.9, -12 ], [ 229.3, 579, -12 ] ]
[ [ 229.3, 239.75, 344.4 ], [ 229.3, 585.2, 541.6500000000001 ] ]
9.15
[ 53, 86, 87 ]
[ -9.15, -9.15, -21.15 ]
0.25
0.25
0.0804
fine
55
51.5
target reached
2.8689
414,132.71
104,040.72
3,984.925
1,556.45
0.07
0.18
0.57
0.00273
0.0046
1.5921
true
true
true
1
1
18.3
36.6
+z
0.2527
{"+z": 0.2527, "-z": 0.2812, "+y": 0.2591, "-y": 0.3299, "+x": 0.6027, "-x": 0.578}
true
0.000032
0.707273
0.981325
[ 0, 490, -1000 ]
70,000
arrays/00042.npz
{"feet": 3, "rounded": false, "W": 458.6, "D": 761.7, "H": 765.2, "lip": 374.7, "seatFront": 393.9, "seatRear": 294.9, "seatDepth": 409.5, "gapY": 439.6, "gapZ": 318.1, "backTopY": 730.8, "P": 30.8, "tp": 12.0, "footY": 55.5, "footX": 147.0, "rearFootY": 563.6}
[{"fraction": 1, "compliance": 0.7072728097264127, "dmax": 0.0014252716891214347}, {"fraction": 0.9700016655166671, "compliance": 0.7074151013049714, "dmax": 0.0014180716212696812}, {"fraction": 0.9409027100335483, "compliance": 0.7074444537954819, "dmax": 0.0014116177081489895}, {"fraction": 0.9126745818363511, "compl...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 458.6}, {"name": "D", "value": 761.7}, {"name": "H", "value": 765.2}, {"name": "lip", "value": 374.7}, {"name": "seatFront", "value": 393.9}, {"name": "seatRear", "value": 294.9}, {"name": "seatDepth", "value": 409.5}, {"name": "gapY", "value": 439.6...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 458.6, D = 761.7, H = 765.2, lip = 374.7, seatFront = 393.9, seat...
00043
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 198 x 30 x 77 mm design space, held at 2 support faces, carrying 23.64 kN at 6 degrees from vertical on 1 load face. Keep 20% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 2364.1, 0, -23523 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 9.195271749090914, 13.572245249537351, -4 ], [ 185.98290924021637, 13.572245249537351, -4 ] ]
[ [ 78.32021021227405, 13.572245249537351, 69.8393353043239 ] ]
1.21
[ 164, 25, 64 ]
[ -1.21, -1.21, -5.21 ]
0.2
0.2
0.0143
medium
62
38.3
target reached
1.9641
2,856.2
577.99
14.398
5.752
31.25
78.23
102.75
0.01952
0.0512
0.3969
true
true
true
1
1
2.42
12.1
-x
0.1208
{"+z": 0.3981, "-z": 0.3828, "+y": 0.9334, "-y": 0.7752, "+x": 0.1559, "-x": 0.1208}
true
0
2.904775
7.308242
[ 201, 0, -2000 ]
210,000
arrays/00043.npz
{"kind": "two feet", "L": 195.2, "W": 27.1, "H": 65.8, "pad_x": 59.0, "pad_len": 38.7, "foot": 18.4}
[{"fraction": 1, "compliance": 2.9047747435459255, "dmax": 0.001525682566145534}, {"fraction": 0.9699977549665394, "compliance": 2.9048366526865506, "dmax": 0.00152571724277528}, {"fraction": 0.940898299984237, "compliance": 2.905158301399106, "dmax": 0.0015258712290944023}, {"fraction": 0.9126729750514686, "compliance...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 195.1781809893073, "w": 27.144490499074703, "h": 65.8393353043239}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 18.3905434981...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 195.178180989, 27.144490499, 65.83933...
00044
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 66 x 205 x 73 mm design space, held at 2 support faces, carrying 2.18 kN straight down on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -48, -21.8, -2181.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 16.345886945350607, 201.35481648886895, 43.196595037641906 ], [ 45.38598071854433, 201.35481648886895, 43.196595037641906 ] ]
[ [ 37.47678459597546, 21.00252558676135, 68.48840457942907 ] ]
1.58
[ 42, 130, 46 ]
[ -1.58, -1.58, -1.58 ]
0.15
0.15
0.0091
medium
65
38.4
target reached
4.1764
6,202.04
912.33
10.778
5.408
32.94
65.65
129.99
0.18733
0.31283
0.4108
true
true
true
1
1
3.16
6.32
+y
0.1599
{"+z": 0.5088, "-z": 0.6167, "+y": 0.1599, "-y": 0.3914, "+x": 0.5403, "-x": 0.558}
true
0.000182
74.623525
121.466286
[ -22, -10, -1000 ]
210,000
arrays/00044.npz
{"Wx": 61.7, "Dy": 197.4, "Hz": 64.5, "bolts": 2, "pad_on_top": true, "pad": [19.64086824500503, 42.0050511735227]}
[{"fraction": 1, "compliance": 74.62352535215103, "dmax": 0.08572517619689732}, {"fraction": 0.9700022308702873, "compliance": 74.64598179452068, "dmax": 0.08469488551828312}, {"fraction": 0.9023572862702327, "compliance": 75.68811835535638, "dmax": 0.0908024090542265}, {"fraction": 0.8752844359616291, "compliance": 13...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 61.73186766389494, "w": 197.35481648886895, "h": 64.48840457942907}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 7.407824119667392, "y": 197.354...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 61.731867664, 197.354816489, 64...
00045
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 589 x 766 x 835 mm design space, held at 3 support faces, carrying 2.10 kN at 22 degrees from vertical on 2 load faces. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 783.3, -1948.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 39.5, 271.3, -12 ], [ 527.2, 271.3, -12 ], [ 283.35, 645.6, -12 ] ]
[ [ 283.35, 232.1, 336.3 ], [ 283.35, 543.4, 538.7 ] ]
9.82
[ 60, 78, 85 ]
[ -9.82, -9.82, -21.82 ]
0.1
0.1113
0.0913
fine
89
111.5
target reached
1.6649
511,761.02
53,092
5,415.349
439.265
0.05
0.63
1.2
0.0021
0.02928
1.6694
true
true
true
2
0.99527
27.78
39.28
-z
0.3195
{"+z": 0.3207, "-z": 0.3195, "+y": 0.414, "-y": 0.4184, "+x": 0.6893, "-x": 0.6691}
true
0.000097
0.404825
2.343853
[ 0, 402, -1000 ]
70,000
arrays/00045.npz
{"feet": 3, "rounded": false, "W": 566.7, "D": 740.7, "H": 793.9, "lip": 355.9, "seatFront": 403.6, "seatRear": 269.0, "seatDepth": 394.2, "gapY": 411.9, "gapZ": 283.5, "backTopY": 674.9, "P": 32.2, "tp": 12.0, "footY": 255.2, "footX": 23.4, "rearFootY": 629.5}
[{"fraction": 1, "compliance": 0.4048253657847644, "dmax": 0.0010627261515432935}, {"fraction": 0.9700008691201607, "compliance": 0.405310885589427, "dmax": 0.0010678754420927654}, {"fraction": 0.940899829073035, "compliance": 0.40498321060233194, "dmax": 0.001045939936046126}, {"fraction": 0.9126727376319372, "complia...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 566.7}, {"name": "D", "value": 740.7}, {"name": "H", "value": 793.9}, {"name": "lip", "value": 355.9}, {"name": "seatFront", "value": 403.6}, {"name": "seatRear", "value": 269.0}, {"name": "seatDepth", "value": 394.2}, {"name": "gapY", "value": 411.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 566.7, D = 740.7, H = 793.9, lip = 355.9, seatFront = 403.6, seat...
00046
ok
null
beam
A steel S355 beam (machined or welded), within a 178 x 82 x 102 mm design space, held at 2 support faces, carrying 134.64 kN at 6 degrees from vertical on 1 load face. Keep 40% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 14853.5, 0, -133815.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 6.810942296526389, 38.46525753776295, -4 ], [ 166.92563635921624, 38.46525753776295, -4 ] ]
[ [ 50.107657406381264, 38.46525753776295, 92.94737786214762 ] ]
1.82
[ 98, 45, 56 ]
[ -1.82, -1.82, -5.82 ]
0.4
0.4
0.0168
coarse
39
28.2
target reached
1.7587
9,453.52
3,791.93
6.739
5.177
52.67
68.57
90.15
0.02815
0.04099
0.3567
true
true
true
1
1
15.44
23.31
-x
0.3074
{"+z": 0.3921, "-z": 0.3254, "+y": 0.9513, "-y": 0.8278, "+x": 0.3958, "-x": 0.3074}
true
0
0.745128
1.056287
[ 222, 0, -2000 ]
210,000
arrays/00046.npz
{"kind": "two feet", "L": 173.7, "W": 76.9, "H": 88.9, "pad_x": 36.2, "pad_len": 27.8, "foot": 13.6}
[{"fraction": 1, "compliance": 0.7451279448543183, "dmax": 0.0004207676190657235}, {"fraction": 0.9700023823067536, "compliance": 0.7451628219339378, "dmax": 0.00042079164864503287}, {"fraction": 0.9409042069592528, "compliance": 0.7455817449925649, "dmax": 0.0004210500394584131}, {"fraction": 0.9126763028543924, "comp...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 173.73657865574265, "w": 76.9305150755259, "h": 88.94737786214762}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 13.6218845930...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 173.736578656, 76.930515076, 88.94737...
00047
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 143 x 137 x 116 mm design space, held at 2 support faces, carrying 10.97 kN at 10 degrees from vertical on 1 load face. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 1157.2, 1460, -10815.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 27.73165443823477, 132.00597592525932, 37.681712914078844 ], [ 109.7391926270903, 132.00597592525932, 37.681712914078844 ] ]
[ [ 117.15013716491934, 14.868443460399684, 110.09055370569146 ] ]
2.11
[ 68, 65, 55 ]
[ -2.11, -2.11, -2.11 ]
0.25
0.25
0.0054
fine
53
39.5
target reached
3.4827
14,698.04
3,739.32
9.964
5.07
35.63
70.02
113.51
0.16243
0.18355
0.287
true
true
true
1
1
5.97
8.44
+y
0.1654
{"+z": 0.3241, "-z": 0.2798, "+y": 0.1654, "-y": 0.2946, "+x": 0.3246, "-x": 0.3612}
true
0.000023
10.752955
12.136156
[ 107, 135, -1000 ]
210,000
arrays/00047.npz
{"Wx": 137.5, "Dy": 128.0, "Hz": 106.1, "bolts": 2, "pad_on_top": true, "pad": [12.133990082189962, 29.736886920799368]}
[{"fraction": 1, "compliance": 10.752954587662627, "dmax": 0.015016560518952218}, {"fraction": 0.9699989805478827, "compliance": 10.75417503319094, "dmax": 0.015018422427731036}, {"fraction": 0.9409009043996641, "compliance": 10.76173793511596, "dmax": 0.015030915112360887}, {"fraction": 0.9126717898181006, "compliance...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 137.47084706532507, "w": 128.00597592525932, "h": 106.09055370569146}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 16.496501647839008, "y": 128....
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 137.470847065, 128.005975925, 1...
00048
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 564 x 705 x 874 mm design space, held at 3 support faces, carrying 2.10 kN at 13 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 459, -2049.2 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 192.7, 214.2, -12 ], [ 347.5, 214.2, -12 ], [ 270.1, 654, -12 ] ]
[ [ 270.1, 194.4, 295.6 ], [ 270.1, 484.95, 545.55 ] ]
9.4
[ 60, 75, 93 ]
[ -9.4, -9.4, -21.4 ]
0.25
0.25
0.0972
medium
55
53.6
target reached
2.9284
443,696.33
108,105.22
4,348.816
1,787.792
0.05
0.13
0.4
0.00149
0.00202
1.7484
true
true
true
1
1
37.6
37.6
-z
0.197
{"+z": 0.2559, "-z": 0.197, "+y": 0.3619, "-y": 0.4445, "+x": 0.5387, "-x": 0.4908}
true
0.000005
0.285109
0.399592
[ 0, 224, -1000 ]
70,000
arrays/00048.npz
{"feet": 3, "rounded": false, "W": 540.2, "D": 685.5, "H": 838.3, "lip": 321.8, "seatFront": 367.7, "seatRear": 223.5, "seatDepth": 318.8, "gapY": 334.4, "gapZ": 252.8, "backTopY": 635.5, "P": 29.2, "tp": 12.0, "footY": 199.6, "footX": 178.1, "rearFootY": 639.4}
[{"fraction": 1, "compliance": 0.285108570731466, "dmax": 0.0007295108612159006}, {"fraction": 0.9699983005996455, "compliance": 0.2851451708897624, "dmax": 0.000719402076351526}, {"fraction": 0.9408997111019397, "compliance": 0.28523234690893845, "dmax": 0.0007196329906898523}, {"fraction": 0.9126750989293778, "compli...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 540.2}, {"name": "D", "value": 685.5}, {"name": "H", "value": 838.3}, {"name": "lip", "value": 321.8}, {"name": "seatFront", "value": 367.7}, {"name": "seatRear", "value": 223.5}, {"name": "seatDepth", "value": 318.8}, {"name": "gapY", "value": 334.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 540.2, D = 685.5, H = 838.3, lip = 321.8, seatFront = 367.7, seat...
00049
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 224 x 64 x 112 mm design space, held at 2 support faces, carrying 305.50 kN at 7 degrees from vertical on 1 load face. Keep 15% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 38191.1, 0, -303103.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.377756483463344, 29.145457952596026, -4 ], [ 211.3293190238745, 29.145457952596026, -4 ] ]
[ [ 105.04767774136941, 29.145457952596026, 103.99365276624603 ] ]
1.87
[ 120, 34, 60 ]
[ -1.87, -1.87, -5.87 ]
0.15
0.15
0.0161
fine
72
40
target reached
1.9947
10,381.76
1,597.3
3.695
1.276
121.78
352.64
417.68
0.09661
0.32028
0.4488
false
true
false
1
1
3.74
10.58
-x
0.1869
{"+z": 0.2268, "-z": 0.2501, "+y": 0.8155, "-y": 0.4983, "+x": 0.1921, "-x": 0.1869}
true
0.000001
1.099204
3.581726
[ 252, 0, -2000 ]
210,000
arrays/00049.npz
{"kind": "two feet", "L": 219.7, "W": 58.3, "H": 100.0, "pad_x": 85.3, "pad_len": 39.4, "foot": 16.8}
[{"fraction": 1, "compliance": 1.0992041079609216, "dmax": 0.0005858722864030714}, {"fraction": 0.9700001937346223, "compliance": 1.099225868577625, "dmax": 0.000585882536185908}, {"fraction": 0.9409012534630063, "compliance": 1.0997847187276466, "dmax": 0.0005861644753546551}, {"fraction": 0.9126741189918051, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 219.70707550733783, "w": 58.29091590519205, "h": 99.99365276624603}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 16.755512966...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 219.707075507, 58.290915905, 99.99365...
00050
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 135 x 118 x 210 mm design space, held at 4 support faces, carrying 128.00 kN at 9 degrees from vertical on 1 load face. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -14407.1, -14280.7, -126378.1 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 21.827334483553617, 111.66523383507995, 36.15196466091173 ], [ 108.1066797492773, 111.66523383507995, 36.15196466091173 ], [ 21.827334483553617, 111.66523383507995, 163.29278124107373 ], [ 108.1066797492773, 111.66523383507995, 163.29278124107373 ] ]
[ [ 51.454661113464354, 15.097019731261897, 203.4447459019855 ] ]
2.41
[ 56, 49, 87 ]
[ -2.41, -2.41, -2.41 ]
0.1
0.1
0.0056
fine
85
54.5
target reached
3.3947
22,386.05
2,227.8
5.692
2.235
79.05
201.32
312.91
0.11421
0.32547
0.4193
true
true
true
1
1
6.82
9.64
+z
0.1144
{"+z": 0.1144, "-z": 0.3111, "+y": 0.3568, "-y": 0.2364, "+x": 0.6036, "-x": 0.5789}
true
0.000005
0.633067
1.873915
[ -114, -113, -1000 ]
210,000
arrays/00050.npz
{"Wx": 129.9, "Dy": 107.7, "Hz": 199.4, "bolts": 4, "pad_on_top": true, "pad": [42.67797922783832, 30.194039462523794]}
[{"fraction": 1, "compliance": 0.6330672366901764, "dmax": 0.0008305454656123994}, {"fraction": 0.9700002469928619, "compliance": 0.6331199105052755, "dmax": 0.0008305889926645762}, {"fraction": 0.9408452095734433, "compliance": 0.6331959261250478, "dmax": 0.0008306634897881013}, {"fraction": 0.9126188653147924, "compl...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 129.93401423283092, "w": 107.66523383507995, "h": 199.4447459019855}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 15.592081707939709, "y": 107.6...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 129.934014233, 107.665233835, 1...
00051
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 572 x 731 x 721 mm design space, held at 4 support faces, carrying 2.10 kN at 22 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 776.6, -1951.1 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 42.2, 220.9, -12 ], [ 507.4000000000001, 220.9, -12 ], [ 42.2, 454.2, -12 ], [ 507.4000000000001, 454.2, -12 ] ]
[ [ 274.8, 221.7, 332.29999999999995 ], [ 274.8, 541.9, 521.1 ] ]
9.37
[ 61, 78, 77 ]
[ -9.37, -9.37, -21.369999999999997 ]
0.25
0.25
0.0775
fine
55
54.7
target reached
2.9922
443,674.13
109,017.08
3,067.174
1,452.53
0.09
0.19
0.49
0.00353
0.00523
1.4617
true
true
true
1
1
18.74
37.48
+y
0.2423
{"+z": 0.2874, "-z": 0.294, "+y": 0.2423, "-y": 0.2857, "+x": 0.6641, "-x": 0.6385}
true
0.000109
0.639676
0.87003
[ 0, 398, -1000 ]
70,000
arrays/00051.npz
{"feet": 4, "rounded": false, "W": 549.6, "D": 709.6, "H": 689.0, "lip": 318.9, "seatFront": 364.7, "seatRear": 299.9, "seatDepth": 373.4, "gapY": 410.3, "gapZ": 353.2, "backTopY": 673.5, "P": 34.8, "tp": 12.0, "footY": 203.5, "footX": 24.8, "rearFootY": 436.8}
[{"fraction": 1, "compliance": 0.6396760282014717, "dmax": 0.001781145147357502}, {"fraction": 0.9699976617758812, "compliance": 0.6398956286732793, "dmax": 0.0017821050871418436}, {"fraction": 0.9408965140975429, "compliance": 0.640037505798908, "dmax": 0.0017827398974974268}, {"fraction": 0.9126673291635004, "complia...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 549.6}, {"name": "D", "value": 709.6}, {"name": "H", "value": 689.0}, {"name": "lip", "value": 318.9}, {"name": "seatFront", "value": 364.7}, {"name": "seatRear", "value": 299.9}, {"name": "seatDepth", "value": 373.4}, {"name": "gapY", "value": 410.3...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 549.6, D = 709.6, H = 689, lip = 318.9, seatFront = 364.7, seatRe...
00052
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 233 x 58 x 76 mm design space, held at 1 support face, carrying 16.53 kN at 9 degrees from vertical on 1 load face. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -2443.6, 0, -16345.5 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 26.85970828033655, 33.736452291119946 ] ]
[ [ 181.59143993089785, 26.85970828033655, 71.47290458223989 ] ]
1.61
[ 145, 36, 47 ]
[ -5.61, -1.61, -1.61 ]
0.1
0.1
0.0201
fine
83
59.3
target reached
1.5471
6,703.85
667.45
7.809
1.704
57.63
264.11
385.57
0.18344
1.03257
0.4669
true
false
false
1
1
3.22
3.22
-x
0.5069
{"+z": 0.5894, "-z": 0.6215, "+y": 0.6858, "-y": 0.6561, "+x": 0.5811, "-x": 0.5069}
true
0.000023
29.618348
192.281108
[ -299, 0, -2000 ]
210,000
arrays/00052.npz
{"kind": "cantilever", "L": 226.1, "W": 53.7, "H": 67.5, "pad_x": 172.1, "pad_len": 18.9, "foot": 19.2}
[{"fraction": 1, "compliance": 29.618347760219997, "dmax": 0.020629363027773562}, {"fraction": 0.9700022386389076, "compliance": 29.618857191756405, "dmax": 0.020629813632195054}, {"fraction": 0.9408999328408327, "compliance": 29.619740651818777, "dmax": 0.02079657561255274}, {"fraction": 0.8697939478883795, "complianc...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 226.05662878218806, "w": 53.7194165606731, "h": 67.47290458223989}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 53.7194...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 226.056628782, 53.719416561, 67.47290...
00053
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 186 x 119 x 186 mm design space, held at 2 support faces, carrying 39.41 kN at 13 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 4614.5, 7267.8, -38453.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 29.362858880056443, 112.98843640668511, 66.8535038282566 ], [ 148.97984376499497, 112.98843640668511, 66.8535038282566 ] ]
[ [ 144.82351414528185, 13.001773484750192, 179.97469952171627 ] ]
2.58
[ 72, 46, 72 ]
[ -2.58, -2.58, -2.58 ]
0.1
0.1
0.0044
medium
84
61
target reached
8.7035
26,904.17
2,702.96
6.42
1.485
55.3
239.04
483.11
1.62767
1.85323
0.3715
false
false
false
1
1
5.16
8.94
+z
0.2924
{"+z": 0.2924, "-z": 0.3647, "+y": 0.4968, "-y": 0.4713, "+x": 0.4439, "-x": 0.4468}
true
0.000029
20.910736
23.91415
[ 120, 189, -1000 ]
210,000
arrays/00053.npz
{"Wx": 178.3, "Dy": 109.0, "Hz": 176.0, "bolts": 2, "pad_on_top": true, "pad": [47.78486882876292, 26.003546969500384]}
[{"fraction": 1, "compliance": 20.910736207372686, "dmax": 0.04235396458987385}, {"fraction": 0.9700008661925065, "compliance": 20.921691282035543, "dmax": 0.04237582681835917}, {"fraction": 0.9409016101556259, "compliance": 20.935518247637365, "dmax": 0.04239836213667039}, {"fraction": 0.9126733588058092, "compliance"...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 178.34270264505142, "w": 108.98843640668511, "h": 175.97469952171627}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 21.40112431740617, "y": 108.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 178.342702645, 108.988436407, 1...
00054
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 410 x 913 x 783 mm design space, held at 4 support faces, carrying 2.10 kN at 19 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 668.9, -1990.6 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 137.9, 169.70000000000002, -12 ], [ 247.9, 169.70000000000002, -12 ], [ 137.9, 818.6, -12 ], [ 247.9, 818.6, -12 ] ]
[ [ 192.9, 246.25, 370.75 ], [ 192.9, 652.55, 555.55 ] ]
9.32
[ 44, 98, 84 ]
[ -9.32, -9.32, -21.32 ]
0.3
0.3
0.0714
fine
49
48.8
target reached
2.2272
432,454.11
129,401.38
5,606.737
3,058.608
0.04
0.08
0.2
0.00059
0.00091
1.8267
true
true
true
1
1
37.28
41.68
+z
0.2761
{"+z": 0.2761, "-z": 0.2812, "+y": 0.2886, "-y": 0.3943, "+x": 0.5145, "-x": 0.5258}
true
0.000005
0.183553
0.275429
[ 0, 336, -1000 ]
70,000
arrays/00054.npz
{"feet": 4, "rounded": false, "W": 385.8, "D": 891.6, "H": 746.2, "lip": 373.2, "seatFront": 403.1, "seatRear": 338.4, "seatDepth": 422.5, "gapY": 461.6, "gapZ": 364.9, "backTopY": 843.5, "P": 31.8, "tp": 12.0, "footY": 153.8, "footX": 122.0, "rearFootY": 802.7}
[{"fraction": 1, "compliance": 0.183552545697038, "dmax": 0.0002967775264027564}, {"fraction": 0.9700010613969914, "compliance": 0.18360491087821176, "dmax": 0.0002936750420774204}, {"fraction": 0.9408994857049123, "compliance": 0.18381960224683105, "dmax": 0.0002951623887879573}, {"fraction": 0.9126711502648668, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 385.8}, {"name": "D", "value": 891.6}, {"name": "H", "value": 746.2}, {"name": "lip", "value": 373.2}, {"name": "seatFront", "value": 403.1}, {"name": "seatRear", "value": 338.4}, {"name": "seatDepth", "value": 422.5}, {"name": "gapY", "value": 461.6...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 385.8, D = 891.6, H = 746.2, lip = 373.2, seatFront = 403.1, seat...
00055
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 369 x 30 x 94 mm design space, held at 2 support faces, carrying 22.89 kN straight down on 1 load face. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -286.1, 0, -22891.9 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 6.4054190725704085, 13.154611615726784, -4 ], [ 358.9552041561895, 13.154611615726784, -4 ] ]
[ [ 132.0226936431283, 13.154611615726784, 86.50212988936133 ] ]
1.59
[ 232, 19, 59 ]
[ -1.59, -1.59, -5.59 ]
0.3
0.3
0.0101
fine
49
35.1
target reached
1.77
6,408.01
1,957.43
12.126
6.506
37.11
69.17
128.85
0.05295
0.10057
0.7378
true
true
true
1
1
3.18
6.36
-x
0.136
{"+z": 0.4483, "-z": 0.4949, "+y": 0.7934, "-y": 0.7192, "+x": 0.1487, "-x": 0.136}
true
0.000001
8.045624
14.880953
[ -25, 0, -2000 ]
210,000
arrays/00055.npz
{"kind": "two feet", "L": 365.4, "W": 26.3, "H": 82.5, "pad_x": 108.7, "pad_len": 46.7, "foot": 12.8}
[{"fraction": 1, "compliance": 8.04562389267115, "dmax": 0.004251549758088282}, {"fraction": 0.9671739421916601, "compliance": 8.046729669660046, "dmax": 0.004252101872650973}, {"fraction": 0.9381500565058325, "compliance": 8.05017429655681, "dmax": 0.004253912306494382}, {"fraction": 0.9099833355680272, "compliance": ...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 365.3606232287599, "w": 26.30922323145357, "h": 82.50212988936133}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 12.8108381451...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 365.360623229, 26.309223231, 82.50212...
00056
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 194 x 89 x 133 mm design space, held at 2 support faces, carrying 33.64 kN straight down on 1 load face. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -571.7, 403.5, -33628.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 35.67982933224828, 83.61878490298022, 85.01997691328428 ], [ 153.36966874661118, 83.61878490298022, 85.01997691328428 ] ]
[ [ 108.29086080262395, 7.238079002675068, 128.47988216996373 ] ]
2.11
[ 92, 42, 63 ]
[ -2.11, -2.11, -2.11 ]
0.25
0.25
0.0064
fine
53
25.9
target reached
3.5944
15,046.86
3,781.96
6.472
3.785
69.53
118.89
170.44
0.17971
0.1736
0.3882
true
true
true
1
1
4.22
4.22
+x
0.3037
{"+z": 0.3827, "-z": 0.5013, "+y": 0.4159, "-y": 0.4914, "+x": 0.3037, "-x": 0.3542}
true
0.000016
3.371895
3.732256
[ -17, 12, -1000 ]
210,000
arrays/00056.npz
{"Wx": 189.0, "Dy": 79.6, "Hz": 124.5, "bolts": 2, "pad_on_top": true, "pad": [28.58566338389275, 14.476158005350136]}
[{"fraction": 1, "compliance": 3.371894755951788, "dmax": 0.004910823236864874}, {"fraction": 0.9700021712526153, "compliance": 3.3722113156006466, "dmax": 0.004891083368240037}, {"fraction": 0.9406705222849473, "compliance": 3.3726999327612104, "dmax": 0.0048799874513414145}, {"fraction": 0.9095722632347716, "complian...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 189.04949807885947, "w": 79.61878490298022, "h": 124.47988216996374}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 22.685939769463136, "y": 79.61...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 189.049498079, 79.618784903, 12...
00057
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 489 x 815 x 752 mm design space, held at 3 support faces, carrying 2.10 kN straight down on 2 load faces. Keep 15% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 58.8, -2099.2 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 75.05, 270.35, -12 ], [ 392.75, 270.35, -12 ], [ 233.9, 605.5500000000001, -12 ] ]
[ [ 233.9, 258, 335.5 ], [ 233.9, 615.65, 525.5 ] ]
9.06
[ 54, 90, 83 ]
[ -9.06, -9.06, -21.060000000000002 ]
0.15
0.15
0.0766
fine
72
70.6
target reached
2.7845
401,179.52
57,878
6,418.212
1,808.296
0.04
0.15
0.3
0.00078
0.00196
1.6308
true
true
true
1
1
18.12
36.24
+y
0.3642
{"+z": 0.4395, "-z": 0.4658, "+y": 0.3642, "-y": 0.4231, "+x": 0.6052, "-x": 0.601}
true
0.00001
0.149673
0.372586
[ 0, 28, -1000 ]
70,000
arrays/00057.npz
{"feet": 3, "rounded": true, "W": 467.8, "D": 796.9, "H": 715.4, "lip": 317.3, "seatFront": 346.1, "seatRear": 324.9, "seatDepth": 446.0, "gapY": 474.5, "gapZ": 335.6, "backTopY": 756.8, "P": 38.9, "tp": 12.0, "footY": 250.9, "footX": 55.6, "rearFootY": 586.1}
[{"fraction": 1, "compliance": 0.14967312973782096, "dmax": 0.00036582534584735907}, {"fraction": 0.9699997091585958, "compliance": 0.14968051098647775, "dmax": 0.00036578773839245787}, {"fraction": 0.9409010266701567, "compliance": 0.14969297419200464, "dmax": 0.00036577288024861976}, {"fraction": 0.9126748683942646, ...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 467.8}, {"name": "D", "value": 796.9}, {"name": "H", "value": 715.4}, {"name": "lip", "value": 317.3}, {"name": "seatFront", "value": 346.1}, {"name": "seatRear", "value": 324.9}, {"name": "seatDepth", "value": 446.0}, {"name": "gapY", "value": 474.5...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 467.8, D = 796.9, H = 715.4, lip = 317.3, seatFront = 346.1, seat...
00058
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 165 x 35 x 84 mm design space, held at 3 support faces, carrying 83.52 kN straight down on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -2713.1, 0, -83480.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.73953364981198, 15.53727578241795, -4 ], [ 153.06623294476245, 15.53727578241795, -4 ], [ 80.9028832972872, 15.53727578241795, -4 ] ]
[ [ 70.449859214673, 15.53727578241795, 76.73883667807752 ] ]
1.24
[ 133, 28, 68 ]
[ -1.24, -1.24, -5.24 ]
0.1
0.1
0.0245
medium
85
47.8
target reached
1.9034
3,014.7
291.24
6.98
1.464
64.47
307.43
383.98
0.02306
0.16506
0.3298
false
true
false
2
0.96252
2.48
4.96
+y
0.5872
{"+z": 0.6647, "-z": 0.7448, "+y": 0.5872, "-y": 0.63, "+x": 0.6943, "-x": 0.68}
true
0
0.899264
4.890363
[ -65, 0, -2000 ]
210,000
arrays/00058.npz
{"kind": "three feet", "L": 161.8, "W": 31.1, "H": 72.7, "pad_x": 48.3, "pad_len": 44.3, "foot": 17.5}
[{"fraction": 1, "compliance": 0.8992639441789403, "dmax": 0.0005077920101039341}, {"fraction": 0.969998750780762, "compliance": 0.8993109311390576, "dmax": 0.0005078191340281888}, {"fraction": 0.940891942535915, "compliance": 0.8993766603914256, "dmax": 0.0005078743849585732}, {"fraction": 0.9126645846346034, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 161.8057665945744, "w": 31.0745515648359, "h": 72.73883667807752}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 17.47906729962...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 161.805766595, 31.074551565, 72.73883...
00059
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 128 x 122 x 130 mm design space, held at 2 support faces, carrying 15.48 kN at 8 degrees from vertical on 1 load face. Keep 15% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 o...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 2190.2, -474.8, -15316.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 23.879226987971727, 116.163383385807, 96.81533374656514 ], [ 99.22149132535033, 116.163383385807, 96.81533374656514 ] ]
[ [ 60.37113808003783, 5.933784446747882, 124.60289560778631 ] ]
2.03
[ 63, 60, 64 ]
[ -2.03, -2.03, -2.03 ]
0.15
0.15
0.0044
coarse
50
22.7
target reached
6.0209
13,357.63
1,955.25
6.742
2.303
66.74
195.4
269.37
0.51682
0.47131
0.2598
true
false
false
1
1
6.32
12.18
+y
0.1805
{"+z": 0.329, "-z": 0.6576, "+y": 0.1805, "-y": 0.5165, "+x": 0.5217, "-x": 0.4925}
true
0.000062
22.827303
25.901071
[ 143, -31, -1000 ]
210,000
arrays/00059.npz
{"Wx": 123.1, "Dy": 112.2, "Hz": 120.6, "bolts": 2, "pad_on_top": true, "pad": [38.98324114450118, 11.867568893495765]}
[{"fraction": 1, "compliance": 22.827302969167995, "dmax": 0.030983920867474393}, {"fraction": 0.9699989780673794, "compliance": 22.82882272742156, "dmax": 0.02880545749327665}, {"fraction": 0.9074469689965108, "compliance": 22.833841663521564, "dmax": 0.025786601371050363}, {"fraction": 0.7891655676835707, "compliance...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 123.10071831332206, "w": 112.163383385807, "h": 120.60289560778631}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 14.772086197598647, "y": 112.16...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 123.100718313, 112.163383386, 1...
00060
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 620 x 699 x 876 mm design space, held at 4 support faces, carrying 2.10 kN at 13 degrees from vertical on 2 load faces. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its spa...
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 488.2, -2042.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 165.1, 171.1, -12 ], [ 431.50000000000006, 171.1, -12 ], [ 165.1, 611.1, -12 ], [ 431.50000000000006, 611.1, -12 ] ]
[ [ 298.3, 192, 314.65 ], [ 298.3, 470.20000000000005, 567.6 ] ]
9.84
[ 63, 71, 89 ]
[ -9.84, -9.84, -21.84 ]
0.15
0.15
0.0895
medium
72
60.2
target reached
1.9045
515,006.54
73,814.29
8,050.335
1,910.504
0.03
0.14
0.32
0.00054
0.0023
1.7515
true
true
true
1
1
39.36
39.36
-z
0.2919
{"+z": 0.3124, "-z": 0.2919, "+y": 0.4478, "-y": 0.4863, "+x": 0.6058, "-x": 0.5922}
true
0.000002
0.131805
0.482859
[ 0, 239, -1000 ]
70,000
arrays/00060.npz
{"feet": 4, "rounded": false, "W": 596.6, "D": 676.0, "H": 835.0, "lip": 344.4, "seatFront": 366.1, "seatRear": 263.2, "seatDepth": 314.0, "gapY": 353.8, "gapZ": 300.2, "backTopY": 586.6, "P": 38.4, "tp": 12.0, "footY": 151.9, "footX": 145.9, "rearFootY": 591.9}
[{"fraction": 1, "compliance": 0.1318054475366246, "dmax": 0.00026217093414332985}, {"fraction": 0.970001504292085, "compliance": 0.13183396475431627, "dmax": 0.0002563627219590004}, {"fraction": 0.9409007312800555, "compliance": 0.13188444853866807, "dmax": 0.00025555518788040603}, {"fraction": 0.912673418188347, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 596.6}, {"name": "D", "value": 676.0}, {"name": "H", "value": 835.0}, {"name": "lip", "value": 344.4}, {"name": "seatFront", "value": 366.1}, {"name": "seatRear", "value": 263.2}, {"name": "seatDepth", "value": 314.0}, {"name": "gapY", "value": 353.8...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 596.6, D = 676, H = 835, lip = 344.4, seatFront = 366.1, seatRear...
00061
ok
null
beam
A steel S355 beam (machined or welded), within a 320 x 63 x 70 mm design space, held at 2 support faces, carrying 20.83 kN straight down on 1 load face. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -1805.5, 0, -20752.5 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 5.494885784705037, 29.23676123127188, -4 ], [ 310.70296023330644, 29.23676123127188, -4 ] ]
[ [ 142.35315030360007, 29.23676123127188, 60.78104613383841 ] ]
1.75
[ 183, 36, 40 ]
[ -1.75, -1.75, -5.75 ]
0.2
0.2
0.0155
fine
62
46.8
target reached
1.9198
8,385.59
1,701.97
14.476
6.978
24.52
50.88
64.93
0.03522
0.09496
0.6405
true
true
true
1
1
6.06
10.5
+x
0.0926
{"+z": 0.5601, "-z": 0.5897, "+y": 0.6864, "-y": 0.5239, "+x": 0.0926, "-x": 0.0933}
true
0.000001
6.497361
16.674975
[ -174, 0, -2000 ]
210,000
arrays/00061.npz
{"kind": "two feet", "L": 316.2, "W": 58.5, "H": 56.8, "pad_x": 114.4, "pad_len": 56.0, "foot": 11.0}
[{"fraction": 1, "compliance": 6.497360813806751, "dmax": 0.0033947508833779287}, {"fraction": 0.9695647536771479, "compliance": 6.49976817536385, "dmax": 0.0033960977632978475}, {"fraction": 0.940312400011635, "compliance": 6.503411872237935, "dmax": 0.003397955797568624}, {"fraction": 0.9120732617780234, "compliance"...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 316.1978460180115, "w": 58.47352246254376, "h": 56.78104613383841}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 10.9897715694...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 316.197846018, 58.473522463, 56.78104...
00062
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 156 x 98 x 176 mm design space, held at 2 support faces, carrying 14.90 kN at 12 degrees from vertical on 1 load face. Keep 40% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of ...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -1122, -2885.2, -14571.9 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 29.46819750713586, 91.89059663852882, 29.667662752167693 ], [ 121.98198221013536, 91.89059663852882, 29.667662752167693 ] ]
[ [ 99.92492273377863, 5.808131061811455, 171.00019235075018 ] ]
2.23
[ 70, 44, 79 ]
[ -2.23, -2.23, -2.23 ]
0.4
0.4
0.0058
fine
36
32.3
target reached
2.411
17,838.57
7,151.02
10.005
5.754
44.98
78.21
146.51
0.28846
0.30216
0.3523
true
true
true
1
1
4.46
17.84
-z
0.1831
{"+z": 0.3315, "-z": 0.1831, "+y": 0.5927, "-y": 0.5363, "+x": 0.4225, "-x": 0.4734}
true
0.000037
12.081233
12.499833
[ -77, -198, -1000 ]
210,000
arrays/00062.npz
{"Wx": 151.5, "Dy": 87.9, "Hz": 167.0, "bolts": 2, "pad_on_top": true, "pad": [60.24146388394694, 11.61626212362291]}
[{"fraction": 1, "compliance": 12.081232520853403, "dmax": 0.018194337285417864}, {"fraction": 0.9700010743551427, "compliance": 12.085116564068342, "dmax": 0.018200353513974296}, {"fraction": 0.9409007002842158, "compliance": 12.11539315033569, "dmax": 0.018266958297318524}, {"fraction": 0.912674460624884, "compliance...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 151.45017971727123, "w": 87.89059663852882, "h": 167.00019235075018}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 18.174021566072547, "y": 87.89...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 151.450179717, 87.890596639, 16...
00063
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 615 x 922 x 753 mm design space, held at 3 support faces, carrying 2.10 kN straight down on 2 load faces. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 134.1, -2095.7 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 172.95, 273.45, -12 ], [ 418.75000000000006, 273.45, -12 ], [ 295.85, 854.05, -12 ] ]
[ [ 295.85, 275.85, 384.5 ], [ 295.85, 650.4000000000001, 551.55 ] ]
10.6
[ 58, 87, 71 ]
[ -10.6, -10.6, -22.6 ]
0.3
0.3
0.0713
fine
48
36.5
target reached
2.7124
1,069,070.21
317,302.31
27,138.613
13,528.07
0.03
0.07
0.17
0.00024
0.00034
1.8444
true
true
true
1
1
21.2
42.4
+y
0.2561
{"+z": 0.341, "-z": 0.3667, "+y": 0.2561, "-y": 0.3479, "+x": 0.4983, "-x": 0.477}
true
0.000001
0.161942
0.20116
[ 0, 64, -1000 ]
70,000
arrays/00063.npz
{"feet": 3, "rounded": true, "W": 591.7, "D": 891.0, "H": 709.7, "lip": 395.3, "seatFront": 428.0, "seatRear": 341.0, "seatDepth": 481.7, "gapY": 498.6, "gapZ": 393.4, "backTopY": 802.2, "P": 30.5, "tp": 12.0, "footY": 258.2, "footX": 157.7, "rearFootY": 838.8}
[{"fraction": 1, "compliance": 0.1619424359865525, "dmax": 0.00018415561060560598}, {"fraction": 0.969998068752414, "compliance": 0.16196175136254148, "dmax": 0.00018420433597627392}, {"fraction": 0.9408989957512554, "compliance": 0.16198322175725996, "dmax": 0.00018424507750169553}, {"fraction": 0.9126738122827347, "c...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 591.7}, {"name": "D", "value": 891.0}, {"name": "H", "value": 709.7}, {"name": "lip", "value": 395.3}, {"name": "seatFront", "value": 428.0}, {"name": "seatRear", "value": 341.0}, {"name": "seatDepth", "value": 481.7}, {"name": "gapY", "value": 498.6...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 591.7, D = 891, H = 709.7, lip = 395.3, seatFront = 428, seatRear...
00064
ok
null
beam
A steel S355 beam (machined or welded), within a 222 x 54 x 54 mm design space, held at 2 support faces, carrying 63.11 kN straight down on 1 load face. Keep 40% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -2459.3, 0, -63058 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 4.369189826521756, 25.09958829715255, -4 ], [ 215.30806091238506, 25.09958829715255, -4 ] ]
[ [ 80.20612245562644, 25.09958829715255, 46.83553460944697 ] ]
1.34
[ 166, 40, 40 ]
[ -1.34, -1.34, -5.34 ]
0.4
0.4
0.0164
fine
39
21.7
target reached
1.6585
3,773.7
1,514.77
3.187
2.045
111.38
173.55
345.87
0.09945
0.15148
0.4449
true
true
true
1
1
2.68
10.72
-x
0.1387
{"+z": 0.5778, "-z": 0.5665, "+y": 0.6814, "-y": 0.6257, "+x": 0.154, "-x": 0.1387}
true
0.000001
5.766562
8.661893
[ -78, 0, -2000 ]
210,000
arrays/00064.npz
{"kind": "two feet", "L": 219.7, "W": 50.2, "H": 42.8, "pad_x": 67.7, "pad_len": 25.0, "foot": 8.7}
[{"fraction": 1, "compliance": 5.7665620647369416, "dmax": 0.003154381901236286}, {"fraction": 0.969999114582821, "compliance": 5.768237222871535, "dmax": 0.003155280323396818}, {"fraction": 0.9405294794730784, "compliance": 5.771945310143421, "dmax": 0.0031572478971770694}, {"fraction": 0.9122945094296929, "compliance...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 219.67725073890682, "w": 50.1991765943051, "h": 42.83553460944697}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 8.73837965304...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 219.677250739, 50.199176594, 42.83553...
00065
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 207 x 102 x 189 mm design space, held at 4 support faces, carrying 141.28 kN at 13 degrees from vertical on 1 load face. Keep 30% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 27295.7, -14475, -137857.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 44.28178993008828, 96.54359768358297, 47.081095380011604 ], [ 155.4089116936679, 96.54359768358297, 47.081095380011604 ], [ 44.28178993008828, 96.54359768358297, 131.33350225181547 ], [ 155.4089116936679, 96.54359768358297, 131.33350225181547 ] ]
[ [ 155.22639241653627, 8.932796141403697, 182.41459763182706 ] ]
2.55
[ 81, 40, 74 ]
[ -2.55, -2.55, -2.55 ]
0.3
0.3
0.0117
coarse
48
22
target reached
2.8418
26,096.5
7,815.93
4.55
2.354
78.01
150.83
469.48
0.12928
0.14779
0.4131
true
true
true
2
0.99067
5.1
5.1
+z
0.2774
{"+z": 0.2774, "-z": 0.5532, "+y": 0.575, "-y": 0.655, "+x": 0.5074, "-x": 0.5936}
true
0
0.652687
0.76685
[ 198, -105, -1000 ]
210,000
arrays/00065.npz
{"Wx": 199.7, "Dy": 92.5, "Hz": 178.4, "bolts": 4, "pad_on_top": true, "pad": [16.488517906160926, 17.865592282807395]}
[{"fraction": 1, "compliance": 0.6526873097214884, "dmax": 0.0009377868627546007}, {"fraction": 0.9700006317702689, "compliance": 0.6527226427615342, "dmax": 0.0009378266388705174}, {"fraction": 0.9409003212308829, "compliance": 0.6528284589135974, "dmax": 0.0009379583302794073}, {"fraction": 0.9126747695253461, "compl...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 199.69070162375618, "w": 92.54359768358297, "h": 178.41459763182706}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 23.96288419485074, "y": 92.543...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 199.690701624, 92.543597684, 17...
00066
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 494 x 869 x 686 mm design space, held at 3 support faces, carrying 2.10 kN at 24 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 837.7, -1925.7 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 116.6, 277.3, -12 ], [ 354.9, 277.3, -12 ], [ 235.75, 632.8, -12 ] ]
[ [ 235.75, 271.4, 336.25 ], [ 235.75, 633.1, 487.29999999999995 ] ]
9.15
[ 54, 95, 75 ]
[ -9.15, -9.15, -21.15 ]
0.2
0.2
0.0742
fine
62
54.4
target reached
3.4015
409,196.41
80,433.31
3,847.716
1,187.698
0.06
0.19
0.62
0.00204
0.00344
1.7385
true
true
true
1
1
18.3
36.6
+y
0.2246
{"+z": 0.3111, "-z": 0.3314, "+y": 0.2246, "-y": 0.2948, "+x": 0.5966, "-x": 0.6047}
true
0.000025
0.42545
0.636313
[ 0, 435, -1000 ]
70,000
arrays/00066.npz
{"feet": 3, "rounded": true, "W": 471.5, "D": 848.9, "H": 655.4, "lip": 336.3, "seatFront": 386.0, "seatRear": 286.5, "seatDepth": 472.8, "gapY": 507.2, "gapZ": 319.2, "backTopY": 759.0, "P": 33.6, "tp": 12.0, "footY": 260.5, "footX": 99.8, "rearFootY": 616.0}
[{"fraction": 1, "compliance": 0.4254499266616498, "dmax": 0.0010587276574891616}, {"fraction": 0.9699998552116564, "compliance": 0.42559045436610243, "dmax": 0.0010206999290522333}, {"fraction": 0.9408056988692031, "compliance": 0.4255546897896775, "dmax": 0.0010155711334650325}, {"fraction": 0.9125623193162129, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 471.5}, {"name": "D", "value": 848.9}, {"name": "H", "value": 655.4}, {"name": "lip", "value": 336.3}, {"name": "seatFront", "value": 386.0}, {"name": "seatRear", "value": 286.5}, {"name": "seatDepth", "value": 472.8}, {"name": "gapY", "value": 507.2...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 471.5, D = 848.9, H = 655.4, lip = 336.3, seatFront = 386, seatRe...
00067
ok
null
beam
A steel S355 beam (machined or welded), within a 403 x 92 x 42 mm design space, held at 3 support faces, carrying 43.97 kN straight down on 1 load face. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 1933, 0, -43931.6 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 7.438258217049811, 43.346695815179444, -4 ], [ 391.3786940281327, 43.346695815179444, -4 ], [ 199.40847612259128, 43.346695815179444, -4 ] ]
[ [ 239.98534806711214, 43.346695815179444, 34.4554891494208 ] ]
1.76
[ 229, 52, 24 ]
[ -1.76, -1.76, -5.76 ]
0.1
0.1
0.0336
fine
83
58.5
target reached
2.4501
8,527.19
860.87
10.469
2.63
33.91
135
194
0.03087
0.15233
0.8061
true
true
true
2
0.95722
3.52
7.04
-x
0.2024
{"+z": 0.7107, "-z": 0.7292, "+y": 0.4947, "-y": 0.4752, "+x": 0.2539, "-x": 0.2024}
true
0.000008
1.871449
7.566078
[ 88, 0, -2000 ]
210,000
arrays/00067.npz
{"kind": "three feet", "L": 398.8, "W": 86.7, "H": 30.5, "pad_x": 214.9, "pad_len": 50.2, "foot": 14.9}
[{"fraction": 1, "compliance": 1.8714486435479287, "dmax": 0.0014054627716108931}, {"fraction": 0.9699997141468714, "compliance": 1.873497606223212, "dmax": 0.0014069481843112788}, {"fraction": 0.9408998656490295, "compliance": 1.8741899364016026, "dmax": 0.0014074554108823478}, {"fraction": 0.9126718691936083, "compli...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 398.81695224518256, "w": 86.69339163035889, "h": 30.455489149420803}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 14.87651643...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 398.816952245, 86.69339163, 30.455489...
00068
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 180 x 197 x 90 mm design space, held at 4 support faces, carrying 27.90 kN straight down on 1 load face. Keep 15% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 1420.7, -612.9, -27857.1 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 29.760205599118713, 186.82015844454125, 21.41640536539108 ], [ 144.21881831730303, 186.82015844454125, 21.41640536539108 ], [ 29.760205599118713, 186.82015844454125, 62.141478876228724 ], [ 144.21881831730303, 186.82015844454125, 62.141478876228724 ] ]
[ [ 131.0849751322925, -4, 56.67072708366008 ] ]
2.37
[ 76, 83, 38 ]
[ -2.37, -6.37, -2.37 ]
0.15
0.15
0.0056
coarse
69
35.7
target reached
2.5321
20,929.38
3,143.1
6.629
2.163
53.56
164.12
282.13
0.14906
0.40286
0.3934
true
false
false
3
0.98618
9.48
14.22
+y
0.312
{"+z": 0.621, "-z": 0.5964, "+y": 0.312, "-y": 0.6927, "+x": 0.6457, "-x": 0.6853}
true
0.000026
5.138151
13.512264
[ 51, -22, -1000 ]
210,000
arrays/00068.npz
{"Wx": 174.0, "Dy": 182.8, "Hz": 83.6, "bolts": 4, "pad_on_top": false, "pad": [18.750546514335536, 45.31654869587939]}
[{"fraction": 1, "compliance": 5.1381510846967435, "dmax": 0.005350518236849833}, {"fraction": 0.9699993759870206, "compliance": 5.1416375602325335, "dmax": 0.005353999118252261}, {"fraction": 0.9409011707443515, "compliance": 5.150070559473361, "dmax": 0.005362390973648265}, {"fraction": 0.9126717835730983, "complianc...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 173.97902391642174, "w": 182.82015844454125, "h": 83.5578842416198}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 20.877482869970606, "y": 182.82...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 173.979023916, 182.820158445, 8...
00069
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 625 x 954 x 721 mm design space, held at 3 support faces, carrying 2.10 kN at 25 degrees from vertical on 2 load faces. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 887, -1903.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 66.8, 204, -12 ], [ 532.0999999999999, 204, -12 ], [ 299.45, 806.5, -12 ] ]
[ [ 299.45, 284.4, 351.25 ], [ 299.45, 697.15, 517.7 ] ]
10.6
[ 59, 90, 68 ]
[ -10.6, -10.6, -22.6 ]
0.15
0.15
0.0797
medium
74
67.1
target reached
3.2495
1,065,622.31
154,075.25
22,631.63
5,776.233
0.04
0.15
0.34
0.00074
0.00209
1.908
true
true
true
1
1
29.98
42.4
+y
0.2193
{"+z": 0.4198, "-z": 0.424, "+y": 0.2193, "-y": 0.2705, "+x": 0.5199, "-x": 0.5247}
true
0.000011
0.358824
0.763715
[ 0, 466, -1000 ]
70,000
arrays/00069.npz
{"feet": 3, "rounded": false, "W": 598.9, "D": 926.7, "H": 681.7, "lip": 324.9, "seatFront": 376.2, "seatRear": 326.3, "seatDepth": 498.8, "gapY": 513.8, "gapZ": 353.7, "backTopY": 880.5, "P": 32.4, "tp": 12.0, "footY": 187.8, "footX": 50.6, "rearFootY": 790.3}
[{"fraction": 1, "compliance": 0.3588239101048613, "dmax": 0.0006352660811956493}, {"fraction": 0.9699977463546087, "compliance": 0.3588961294898878, "dmax": 0.0006351782866510306}, {"fraction": 0.9408969508657354, "compliance": 0.35907689082034333, "dmax": 0.0006345945927576869}, {"fraction": 0.9126688435922149, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 598.9}, {"name": "D", "value": 926.7}, {"name": "H", "value": 681.7}, {"name": "lip", "value": 324.9}, {"name": "seatFront", "value": 376.2}, {"name": "seatRear", "value": 326.3}, {"name": "seatDepth", "value": 498.8}, {"name": "gapY", "value": 513.8...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 598.9, D = 926.7, H = 681.7, lip = 324.9, seatFront = 376.2, seat...
00070
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 219 x 93 x 46 mm design space, held at 1 support face, carrying 14.45 kN at 5 degrees from vertical on 1 load face. Keep 40% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 1359, 0, -14381.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 44.184065171269424, 19.381895646111538 ] ]
[ [ 149.77559810422298, 44.184065171269424, 42.763791292223075 ] ]
1.55
[ 141, 60, 30 ]
[ -5.55, -1.55, -1.55 ]
0.4
0.4
0.0328
medium
31
16
target reached
1.903
5,967.87
2,388.67
5.774
4.931
77.93
91.27
108.31
0.34872
0.35458
0.4371
true
true
true
1
1
3.1
9.3
-x
0.2779
{"+z": 0.7312, "-z": 0.7761, "+y": 0.5272, "-y": 0.5393, "+x": 0.5561, "-x": 0.2779}
true
0.000113
57.025126
74.867985
[ 189, 0, -2000 ]
210,000
arrays/00070.npz
{"kind": "cantilever", "L": 210.4, "W": 88.4, "H": 38.8, "pad_x": 132.9, "pad_len": 33.7, "foot": 15.7}
[{"fraction": 1, "compliance": 57.02512554650655, "dmax": 0.04459230928685547}, {"fraction": 0.948820087496346, "compliance": 57.02216167989067, "dmax": 0.041594199770374374}, {"fraction": 0.8680469884114409, "compliance": 57.01817865036873, "dmax": 0.03692577232772663}, {"fraction": 0.751824492040607, "compliance": 57...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 210.40763660920828, "w": 88.36813034253885, "h": 38.763791292223075}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 88.36...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 210.407636609, 88.368130343, 38.76379...
00071
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 99 x 212 x 97 mm design space, held at 4 support faces, carrying 51.13 kN at 8 degrees from vertical on 1 load face. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 810.9, 6690.3, -50684.1 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 24.710529612114122, 203.7523322760968, 27.337610378195272 ], [ 69.08157957952676, 203.7523322760968, 27.337610378195272 ], [ 24.710529612114122, 203.7523322760968, 65.20994874899175 ], [ 69.08157957952676, 203.7523322760968, 65.20994874899175 ] ]
[ [ 38.99342390521372, -4, 29.012246013607466 ] ]
2.06
[ 48, 103, 47 ]
[ -2.06, -6.0600000000000005, -2.06 ]
0.3
0.3
0.0094
fine
49
23.9
target reached
1.7455
13,712
4,142.61
3.681
2.501
96.44
141.94
205.18
0.2537
0.47954
0.4244
true
false
false
1
1
4.12
8.24
+y
0.0916
{"+z": 0.5874, "-z": 0.5622, "+y": 0.0916, "-y": 0.3545, "+x": 0.6742, "-x": 0.5816}
true
0.000017
4.952698
9.391774
[ 16, 132, -1000 ]
210,000
arrays/00071.npz
{"Wx": 93.8, "Dy": 199.8, "Hz": 92.5, "bolts": 4, "pad_on_top": false, "pad": [32.7624903342017, 15.774601540322802]}
[{"fraction": 1, "compliance": 4.952697906967989, "dmax": 0.005005397267224712}, {"fraction": 0.9699987164170263, "compliance": 4.957152050850323, "dmax": 0.005009621352078077}, {"fraction": 0.9409008777732798, "compliance": 4.974009236469603, "dmax": 0.005025410879959097}, {"fraction": 0.9126719260656208, "compliance"...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 93.79210919164089, "w": 199.7523322760968, "h": 92.54755912718703}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 11.255053102996907, "y": 199.752...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 93.792109192, 199.752332276, 92...
00072
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 517 x 881 x 862 mm design space, held at 3 support faces, carrying 2.10 kN at 24 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 839.3, -1925 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 165.70000000000002, 275.2, -12 ], [ 328.40000000000003, 275.2, -12 ], [ 247.05, 643.4, -12 ] ]
[ [ 247.05, 260.3, 313.95 ], [ 247.05, 637.05, 562.5 ] ]
9.58
[ 54, 92, 90 ]
[ -9.58, -9.58, -21.58 ]
0.25
0.25
0.0899
medium
55
51.6
target reached
2.7901
469,592.65
116,149.92
3,667.237
1,314.951
0.06
0.17
0.61
0.0027
0.00444
1.7627
true
true
true
1
1
38.32
38.32
-z
0.2714
{"+z": 0.2863, "-z": 0.2714, "+y": 0.3362, "-y": 0.3687, "+x": 0.5637, "-x": 0.5417}
true
0.000049
0.506536
0.733985
[ 0, 436, -1000 ]
70,000
arrays/00072.npz
{"feet": 3, "rounded": true, "W": 494.1, "D": 855.1, "H": 827.4, "lip": 343.7, "seatFront": 380.2, "seatRear": 247.7, "seatDepth": 450.6, "gapY": 479.5, "gapZ": 297.6, "backTopY": 794.6, "P": 36.8, "tp": 12.0, "footY": 256.8, "footX": 147.3, "rearFootY": 625.0}
[{"fraction": 1, "compliance": 0.506535519808655, "dmax": 0.0014002132753184885}, {"fraction": 0.9699998554906334, "compliance": 0.5065991181886256, "dmax": 0.001400359496984996}, {"fraction": 0.9409004860331697, "compliance": 0.5066719157063206, "dmax": 0.0014004399672261378}, {"fraction": 0.9126729897542859, "complia...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 494.1}, {"name": "D", "value": 855.1}, {"name": "H", "value": 827.4}, {"name": "lip", "value": 343.7}, {"name": "seatFront", "value": 380.2}, {"name": "seatRear", "value": 247.7}, {"name": "seatDepth", "value": 450.6}, {"name": "gapY", "value": 479.5...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 494.1, D = 855.1, H = 827.4, lip = 343.7, seatFront = 380.2, seat...
00073
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 242 x 90 x 96 mm design space, held at 2 support faces, carrying 389.20 kN straight down on 1 load face. Keep 15% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -23503.9, 0, -388494.2 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 7.537598491205821, 42.39731062160576, -4 ], [ 230.0617615619561, 42.39731062160576, -4 ] ]
[ [ 149.35325685224507, 42.39731062160576, 88.00362723882654 ] ]
2.05
[ 118, 44, 47 ]
[ -2.05, -2.05, -6.05 ]
0.15
0.15
0.019
fine
72
39
target reached
1.9622
13,712.78
2,067.6
3.596
1.202
125.13
374.26
446.48
0.1143
0.39857
0.4838
false
true
false
1
1
4.1
11.6
+x
0.1339
{"+z": 0.3536, "-z": 0.3758, "+y": 0.764, "-y": 0.4609, "+x": 0.1339, "-x": 0.1696}
true
0.000001
0.989102
3.343247
[ -121, 0, -2000 ]
210,000
arrays/00073.npz
{"kind": "two feet", "L": 237.6, "W": 84.8, "H": 84.0, "pad_x": 130.0, "pad_len": 38.6, "foot": 15.1}
[{"fraction": 1, "compliance": 0.9891024444013302, "dmax": 0.0005407868448197485}, {"fraction": 0.970000493169601, "compliance": 0.9891338869752456, "dmax": 0.0005408037451765768}, {"fraction": 0.940898555013069, "compliance": 0.9896638743953811, "dmax": 0.0005410762761686813}, {"fraction": 0.9126695270503526, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 237.59936005316194, "w": 84.79462124321152, "h": 84.00362723882654}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 15.075196982...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 237.599360053, 84.794621243, 84.00362...
00074
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 206 x 132 x 206 mm design space, held at 2 support faces, carrying 89.99 kN at 6 degrees from vertical on 1 load face. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 268.3, -9839.2, -89447.6 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 49.6544183960948, 120.92757175451729, 82.97222210520557 ], [ 150.3288781084908, 120.92757175451729, 82.97222210520557 ] ]
[ [ 109.72880296876951, -4, 42.52456157271294 ] ]
2.86
[ 72, 46, 72 ]
[ -2.86, -6.859999999999999, -2.86 ]
0.3
0.3
0.0121
medium
48
18.9
target reached
2.874
36,576.74
11,184.55
5.425
4.247
65.44
83.58
122.85
0.12681
0.14498
0.4118
true
true
true
1
1
11.44
28.6
+z
0.2635
{"+z": 0.2635, "-z": 0.3761, "+y": 0.2792, "-y": 0.5263, "+x": 0.3922, "-x": 0.4227}
true
0.000006
1.252473
1.425157
[ 3, -110, -1000 ]
210,000
arrays/00074.npz
{"Wx": 200.0, "Dy": 116.9, "Hz": 198.3, "bolts": 2, "pad_on_top": false, "pad": [30.27469228149029, 16.35756334934846]}
[{"fraction": 1, "compliance": 1.2524734517167222, "dmax": 0.0014176871066113293}, {"fraction": 0.9700019372336304, "compliance": 1.252546747611901, "dmax": 0.0014177575551973898}, {"fraction": 0.9408998450213095, "compliance": 1.252615355344532, "dmax": 0.0014178241408662794}, {"fraction": 0.9126743510267338, "complia...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 199.9832965045856, "w": 116.92757175451729, "h": 198.26489872216442}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 23.997995580550274, "y": 116.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 199.983296505, 116.927571755, 1...
00075
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 576 x 970 x 717 mm design space, held at 4 support faces, carrying 2.10 kN at 20 degrees from vertical on 2 load faces. Keep 40% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 733.9, -1967.6 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 93.05000000000001, 240.85, -12 ], [ 460.15000000000003, 240.85, -12 ], [ 93.05000000000001, 823.35, -12 ], [ 460.15000000000003, 823.35, -12 ] ]
[ [ 276.6, 271.1, 324.75 ], [ 276.6, 685.4000000000001, 513.25 ] ]
10.1
[ 57, 96, 71 ]
[ -10.1, -10.1, -22.1 ]
0.4
0.4
0.0737
coarse
39
31.7
target reached
1.9542
550,480.5
221,219.36
7,549.505
4,605.997
0.03
0.05
0.14
0.0004
0.00062
1.9392
true
true
true
1
1
28.57
40.4
+y
0.1879
{"+z": 0.4352, "-z": 0.3951, "+y": 0.1879, "-y": 0.2771, "+x": 0.5304, "-x": 0.5097}
true
0.000003
0.132045
0.168143
[ 0, 373, -1000 ]
70,000
arrays/00075.npz
{"feet": 4, "rounded": true, "W": 553.2, "D": 942.0, "H": 676.1, "lip": 325.9, "seatFront": 346.0, "seatRear": 303.5, "seatDepth": 472.2, "gapY": 504.6, "gapZ": 350.4, "backTopY": 866.2, "P": 38.7, "tp": 12.0, "footY": 221.5, "footX": 73.7, "rearFootY": 804.0}
[{"fraction": 1, "compliance": 0.13204521181556175, "dmax": 0.00020510967954509395}, {"fraction": 0.969999372674674, "compliance": 0.1320714897914151, "dmax": 0.00020241295089366411}, {"fraction": 0.940901128703029, "compliance": 0.13213665762851529, "dmax": 0.00020238765551500943}, {"fraction": 0.9126763146084766, "co...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 553.2}, {"name": "D", "value": 942.0}, {"name": "H", "value": 676.1}, {"name": "lip", "value": 325.9}, {"name": "seatFront", "value": 346.0}, {"name": "seatRear", "value": 303.5}, {"name": "seatDepth", "value": 472.2}, {"name": "gapY", "value": 504.6...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 553.2, D = 942, H = 676.1, lip = 325.9, seatFront = 346, seatRear...
00076
ok
null
beam
A steel S355 beam (machined or welded), within a 259 x 40 x 114 mm design space, held at 1 support face, carrying 12.61 kN straight down on 1 load face. Keep 40% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 44.1, 0, -12605.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 17.647778720722094, 52.925430982167995 ] ]
[ [ 195.01185840022325, 17.647778720722094, 109.85086196433599 ] ]
1.68
[ 154, 24, 68 ]
[ -5.68, -1.68, -1.68 ]
0.4
0.4
0.0238
medium
38
18.1
target reached
1.4477
7,497.96
2,988.09
11.284
7.765
31.46
45.72
59.93
0.07542
0.12463
0.5174
true
true
true
1
1
3.36
9.5
-x
0.3155
{"+z": 0.4767, "-z": 0.5815, "+y": 0.7566, "-y": 0.7555, "+x": 0.3968, "-x": 0.3155}
true
0.000039
17.462502
30.268052
[ 7, 0, -2000 ]
210,000
arrays/00076.npz
{"kind": "cantilever", "L": 249.8, "W": 35.3, "H": 105.9, "pad_x": 167.0, "pad_len": 55.9, "foot": 14.1}
[{"fraction": 1, "compliance": 17.46250152207984, "dmax": 0.011967460558895813}, {"fraction": 0.9700003961651216, "compliance": 17.46273169928842, "dmax": 0.01148262854311611}, {"fraction": 0.9163200221852468, "compliance": 17.468937796883683, "dmax": 0.011075951438968069}, {"fraction": 0.8888311148086523, "compliance"...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 249.82852111732302, "w": 35.29555744144419, "h": 105.85086196433599}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 35.29...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 249.828521117, 35.295557441, 105.8508...
00077
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 193 x 78 x 100 mm design space, held at 2 support faces, carrying 29.68 kN at 13 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 4769.7, -4769.7, -28907.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 33.98914910448991, 72.85172962475556, 59.98297355154651 ], [ 155.26502864409665, 72.85172962475556, 59.98297355154651 ] ]
[ [ 140.00716810825924, 7.546885441619523, 96.39742264633489 ] ]
1.82
[ 106, 43, 55 ]
[ -1.82, -1.82, -1.82 ]
0.1
0.1
0.0089
medium
84
38.9
target reached
5.6989
9,516.6
941.95
3.642
1.279
97.48
277.66
362.15
0.20191
0.33021
0.3858
false
true
false
1
1
3.64
7.28
+x
0.3795
{"+z": 0.3878, "-z": 0.5317, "+y": 0.4491, "-y": 0.5504, "+x": 0.3795, "-x": 0.4702}
true
0.000002
5.349329
9.483348
[ 165, -165, -1000 ]
210,000
arrays/00077.npz
{"Wx": 189.3, "Dy": 68.9, "Hz": 92.4, "bolts": 2, "pad_on_top": true, "pad": [69.99617405413653, 15.093770883239046]}
[{"fraction": 1, "compliance": 5.349328983287802, "dmax": 0.006984331138316256}, {"fraction": 0.9699994088553469, "compliance": 5.350032859904573, "dmax": 0.0067997080676761345}, {"fraction": 0.9409003133066661, "compliance": 5.351676317678654, "dmax": 0.006728335583761195}, {"fraction": 0.9126731561213028, "compliance...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 189.25417774858656, "w": 68.85172962475556, "h": 92.39742264633489}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 22.710501329830386, "y": 68.851...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 189.254177749, 68.851729625, 92...
00078
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 600 x 721 x 712 mm design space, held at 3 support faces, carrying 2.10 kN at 7 degrees from vertical on 2 load faces. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 262.5, -2083.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 178.95, 88.65, -12 ], [ 397.84999999999997, 88.65, -12 ], [ 288.4, 470.84999999999997, -12 ] ]
[ [ 288.4, 204.95, 326.5 ], [ 288.4, 485.35, 502.25 ] ]
9.37
[ 64, 77, 76 ]
[ -9.37, -9.37, -21.369999999999997 ]
0.1
0.1
0.0776
medium
136
172.2
target reached
1.6994
443,614.93
41,575.89
5,049.867
527.458
0.05
0.52
0.81
0.0015
0.02773
1.443
true
true
true
2
0.99769
26.5
37.48
+y
0.2774
{"+z": 0.3617, "-z": 0.3203, "+y": 0.2774, "-y": 0.3255, "+x": 0.5537, "-x": 0.563}
true
0.000904
0.281879
1.769794
[ 0, 126, -1000 ]
70,000
arrays/00078.npz
{"feet": 3, "rounded": true, "W": 576.8, "D": 697.1, "H": 673.1, "lip": 338.3, "seatFront": 371.5, "seatRear": 281.5, "seatDepth": 339.9, "gapY": 355.7, "gapZ": 331.4, "backTopY": 615.0, "P": 36.9, "tp": 12.0, "footY": 70.2, "footX": 160.5, "rearFootY": 452.4}
[{"fraction": 1, "compliance": 0.28187912789737424, "dmax": 0.000709065193027997}, {"fraction": 0.9700015425849868, "compliance": 0.2819708071594305, "dmax": 0.0007083443815171827}, {"fraction": 0.9408997126935462, "compliance": 0.28206974193359635, "dmax": 0.0007078662179213614}, {"fraction": 0.9126704074352596, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 576.8}, {"name": "D", "value": 697.1}, {"name": "H", "value": 673.1}, {"name": "lip", "value": 338.3}, {"name": "seatFront", "value": 371.5}, {"name": "seatRear", "value": 281.5}, {"name": "seatDepth", "value": 339.9}, {"name": "gapY", "value": 355.7...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 576.8, D = 697.1, H = 673.1, lip = 338.3, seatFront = 371.5, seat...
00079
ok
null
beam
A steel S355 beam (machined or welded), within a 412 x 93 x 131 mm design space, held at 3 support faces, carrying 194.48 kN straight down on 1 load face. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 3111.2, 0, -194451.7 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 5.895591254702312, 42.64028825323993, -4 ], [ 398.36996463781014, 42.64028825323993, -4 ], [ 202.13277794625623, 42.64028825323993, -4 ] ]
[ [ 193.544692092579, 42.64028825323993, 120.89302760456526 ] ]
2.73
[ 151, 34, 48 ]
[ -2.73, -2.73, -6.73 ]
0.3
0.3
0.0181
medium
48
23.2
target reached
2.7955
31,902.23
9,719.04
8.168
5.071
43.46
70.01
97.38
0.02458
0.02833
0.8245
true
true
true
1
1
5.46
15.44
+x
0.2816
{"+z": 0.4209, "-z": 0.4628, "+y": 0.8786, "-y": 0.7258, "+x": 0.2816, "-x": 0.3118}
true
0
0.460673
0.540914
[ 32, 0, -2000 ]
210,000
arrays/00079.npz
{"kind": "three feet", "L": 404.3, "W": 85.3, "H": 116.9, "pad_x": 157.8, "pad_len": 71.5, "foot": 11.8}
[{"fraction": 1, "compliance": 0.4606726800342167, "dmax": 0.00025280665575132315}, {"fraction": 0.9699999522975867, "compliance": 0.46067429093741485, "dmax": 0.0002528083563041287}, {"fraction": 0.9409014802058836, "compliance": 0.46071350157776286, "dmax": 0.00025282642097432907}, {"fraction": 0.9126759622769316, "c...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 404.26555589251245, "w": 85.28057650647986, "h": 116.89302760456526}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 11.79118250...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 404.265555893, 85.280576506, 116.8930...
00080
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 194 x 212 x 147 mm design space, held at 2 support faces, carrying 37.40 kN at 14 degrees from vertical on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 ...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -6996.6, 5945.3, -36252 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 34.897096026291045, 200.82378265317647, 56.09055541395689 ], [ 152.06312360403976, 200.82378265317647, 56.09055541395689 ] ]
[ [ 59.0074155361452, -4, 78.74156724936435 ] ]
2.94
[ 66, 72, 50 ]
[ -2.94, -6.9399999999999995, -2.94 ]
0.15
0.15
0.0057
medium
67
41.5
target reached
5.5793
40,781.96
6,143.17
5.298
1.873
84.94
240.22
375.98
1.01689
1.17511
0.4234
true
false
false
1
1
5.88
11.76
+y
0.2049
{"+z": 0.381, "-z": 0.3202, "+y": 0.2049, "-y": 0.3551, "+x": 0.5033, "-x": 0.4836}
true
0.000155
23.798467
28.316835
[ -193, 164, -1000 ]
210,000
arrays/00080.npz
{"Wx": 187.0, "Dy": 196.8, "Hz": 138.2, "bolts": 2, "pad_on_top": false, "pad": [73.0675610771039, 26.52780908678257]}
[{"fraction": 1, "compliance": 23.79846674331379, "dmax": 0.02574849127296222}, {"fraction": 0.9699982437996371, "compliance": 23.808383907769215, "dmax": 0.02540894088382257}, {"fraction": 0.9408989794524557, "compliance": 23.867692798806594, "dmax": 0.025917200139536196}, {"fraction": 0.9126729369524069, "compliance"...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 186.9602196303308, "w": 196.82378265317647, "h": 138.1885777213905}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 22.435226355639696, "y": 196.82...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 186.96021963, 196.823782653, 13...
00081
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 505 x 949 x 758 mm design space, held at 3 support faces, carrying 2.10 kN at 12 degrees from vertical on 2 load faces. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 429.6, -2055.6 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 166.29999999999998, 199.7, -12 ], [ 311.7, 199.7, -12 ], [ 239, 740.8000000000001, -12 ] ]
[ [ 239, 258.75, 347.20000000000005 ], [ 239, 654.9, 544.65 ] ]
10.1
[ 50, 94, 75 ]
[ -10.1, -10.1, -22.1 ]
0.15
0.15
0.0707
medium
72
63.5
target reached
3.3692
908,363.41
131,462.04
22,905.626
6,171.544
0.04
0.14
0.33
0.00062
0.00222
1.8988
true
true
true
1
1
28.57
40.4
+y
0.2538
{"+z": 0.394, "-z": 0.3725, "+y": 0.2538, "-y": 0.315, "+x": 0.5516, "-x": 0.5394}
true
0.000014
0.230377
0.472462
[ 0, 209, -1000 ]
70,000
arrays/00081.npz
{"feet": 3, "rounded": false, "W": 478.0, "D": 929.0, "H": 717.1, "lip": 323.6, "seatFront": 379.8, "seatRear": 314.6, "seatDepth": 447.5, "gapY": 466.4, "gapZ": 372.2, "backTopY": 843.4, "P": 35.2, "tp": 12.0, "footY": 182.1, "footX": 148.7, "rearFootY": 723.2}
[{"fraction": 1, "compliance": 0.23037675926966755, "dmax": 0.0004926605586636051}, {"fraction": 0.9700010743551427, "compliance": 0.23039734384720478, "dmax": 0.000478178288529389}, {"fraction": 0.9409007002842158, "compliance": 0.23046357460591524, "dmax": 0.0004791501903936475}, {"fraction": 0.912674460624884, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 478.0}, {"name": "D", "value": 929.0}, {"name": "H", "value": 717.1}, {"name": "lip", "value": 323.6}, {"name": "seatFront", "value": 379.8}, {"name": "seatRear", "value": 314.6}, {"name": "seatDepth", "value": 447.5}, {"name": "gapY", "value": 466.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 478, D = 929, H = 717.1, lip = 323.6, seatFront = 379.8, seatRear...
00082
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 341 x 49 x 76 mm design space, held at 3 support faces, carrying 151.25 kN at 5 degrees from vertical on 1 load face. Keep 25% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its spa...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 13706.7, 0, -150623 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 8.673469237544756, 22.132090795888278, -4 ], [ 328.86454603437204, 22.132090795888278, -4 ], [ 168.76900763595842, 22.132090795888278, -4 ] ]
[ [ 79.55531824136946, 22.132090795888278, 67.53942070167216 ] ]
1.69
[ 202, 29, 45 ]
[ -1.69, -1.69, -5.6899999999999995 ]
0.25
0.25
0.0159
coarse
55
27.9
target reached
2.8229
7,713.39
1,929.67
4.406
2.518
102.14
178.68
257.83
0.07241
0.10283
0.6828
true
true
true
2
0.98861
3.38
3.38
-x
0.1413
{"+z": 0.4972, "-z": 0.4159, "+y": 0.9694, "-y": 0.8667, "+x": 0.1953, "-x": 0.1413}
true
0
1.645893
2.330586
[ 182, 0, -2000 ]
210,000
arrays/00082.npz
{"kind": "three feet", "L": 337.5, "W": 44.3, "H": 63.5, "pad_x": 63.8, "pad_len": 31.6, "foot": 17.3}
[{"fraction": 1, "compliance": 1.6458928490684697, "dmax": 0.0008836014877869478}, {"fraction": 0.969998369476602, "compliance": 1.6459839668485243, "dmax": 0.0008836427634066501}, {"fraction": 0.9408983224791628, "compliance": 1.6462838893964031, "dmax": 0.0008837165983130368}, {"fraction": 0.9126710850653648, "compli...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 337.53801527191683, "w": 44.264181591776556, "h": 63.539420701672164}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 17.3469384...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 337.538015272, 44.264181592, 63.53942...
00083
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 122 x 200 x 76 mm design space, held at 2 support faces, carrying 6.79 kN straight down on 1 load face. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -332.3, -88.2, -6782 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 19.440037051711176, 194.3150837946383, 27.68207390699103 ], [ 97.11412622192988, 194.3150837946383, 27.68207390699103 ] ]
[ [ 22.329743004371892, 20.09887268700652, 71.66919085729556 ] ]
1.96
[ 62, 102, 39 ]
[ -1.96, -1.96, -1.96 ]
0.25
0.25
0.0075
medium
49
26.4
target reached
3.94
11,829.56
2,937.89
5.505
1.651
64.49
215.06
719.39
2.6376
2.70552
0.3998
true
false
false
1
1
3.92
7.84
+y
0.1324
{"+z": 0.625, "-z": 0.5813, "+y": 0.1324, "-y": 0.3747, "+x": 0.5347, "-x": 0.4453}
true
0.000029
339.648533
347.107809
[ -49, -13, -1000 ]
210,000
arrays/00083.npz
{"Wx": 116.6, "Dy": 190.3, "Hz": 67.7, "bolts": 2, "pad_on_top": true, "pad": [38.62291983243988, 40.19774537401304]}
[{"fraction": 1, "compliance": 339.6485325030105, "dmax": 0.3889543850427547}, {"fraction": 0.9700005859260561, "compliance": 339.6455292598214, "dmax": 0.3889514650670449}, {"fraction": 0.9408995918048476, "compliance": 339.6541917480643, "dmax": 0.38896230993887365}, {"fraction": 0.9126726040507022, "compliance": 339...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 116.55416327364105, "w": 190.3150837946383, "h": 67.66919085729556}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 13.986499592836926, "y": 190.31...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 116.554163274, 190.315083795, 6...
00084
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 587 x 689 x 819 mm design space, held at 3 support faces, carrying 2.10 kN at 21 degrees from vertical on 2 load faces. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 756.2, -1959.1 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 145.75, 81.15, -12 ], [ 419.45000000000005, 81.15, -12 ], [ 282.6, 629.85, -12 ] ]
[ [ 282.6, 189.5, 285.3 ], [ 282.6, 471.35, 521.8 ] ]
9.31
[ 63, 74, 88 ]
[ -9.31, -9.31, -21.310000000000002 ]
0.1
0.116
0.096
fine
79
85.5
target reached
1.4277
430,750.6
46,591.45
3,554.526
426.122
0.06
0.54
1.07
0.00126
0.00901
1.6386
true
true
true
1
1
18.62
37.24
+z
0.2478
{"+z": 0.2478, "-z": 0.2592, "+y": 0.3908, "-y": 0.4074, "+x": 0.6487, "-x": 0.6689}
true
0.000023
0.320625
2.076253
[ 0, 386, -1000 ]
70,000
arrays/00084.npz
{"feet": 3, "rounded": false, "W": 565.2, "D": 665.7, "H": 788.1, "lip": 303.6, "seatFront": 346.3, "seatRear": 224.3, "seatDepth": 309.0, "gapY": 327.8, "gapZ": 255.5, "backTopY": 614.9, "P": 39.5, "tp": 12.0, "footY": 61.4, "footX": 126.0, "rearFootY": 610.1}
[{"fraction": 1, "compliance": 0.3206253583060692, "dmax": 0.000641755897555256}, {"fraction": 0.970001690453766, "compliance": 0.320732304148812, "dmax": 0.0006385305465210408}, {"fraction": 0.9409017363375112, "compliance": 0.32089586438791934, "dmax": 0.0006313262072198112}, {"fraction": 0.9126759883117197, "complia...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 565.2}, {"name": "D", "value": 665.7}, {"name": "H", "value": 788.1}, {"name": "lip", "value": 303.6}, {"name": "seatFront", "value": 346.3}, {"name": "seatRear", "value": 224.3}, {"name": "seatDepth", "value": 309.0}, {"name": "gapY", "value": 327.8...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 565.2, D = 665.7, H = 788.1, lip = 303.6, seatFront = 346.3, seat...
00085
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 386 x 57 x 108 mm design space, held at 3 support faces, carrying 254.11 kN at 5 degrees from vertical on 1 load face. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 23781.2, 0, -252991.3 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 7.062815986583848, 26.007345455509014, -4 ], [ 372.89520606901516, 26.007345455509014, -4 ], [ 189.9790110277995, 26.007345455509014, -4 ] ]
[ [ 170.54597296769296, 26.007345455509014, 98.16220878934568 ] ]
2.11
[ 183, 27, 51 ]
[ -2.11, -2.11, -6.109999999999999 ]
0.1
0.1
0.0098
fine
84
44.3
target reached
6.1289
14,996.35
1,516.68
3.235
1.712
139.11
262.85
326.07
0.0724
0.16776
0.7723
true
true
true
2
0.98319
4.22
4.22
+z
0.5253
{"+z": 0.5253, "-z": 0.5468, "+y": 0.8834, "-y": 0.7468, "+x": 0.5412, "-x": 0.6283}
true
0
0.953583
1.538396
[ 188, 0, -2000 ]
210,000
arrays/00085.npz
{"kind": "three feet", "L": 380.0, "W": 52.0, "H": 94.2, "pad_x": 158.0, "pad_len": 25.1, "foot": 14.1}
[{"fraction": 1, "compliance": 0.9535833704567386, "dmax": 0.000526008140039412}, {"fraction": 0.9700012009126936, "compliance": 0.9535950263407486, "dmax": 0.0005260167005305789}, {"fraction": 0.9407325567431247, "compliance": 0.9536227832970298, "dmax": 0.0005260353348028405}, {"fraction": 0.912467875585445, "complia...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 379.958022055599, "w": 52.01469091101803, "h": 94.16220878934568}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 14.12563197316...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 379.958022056, 52.014690911, 94.16220...
00086
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 183 x 94 x 180 mm design space, held at 2 support faces, carrying 90.42 kN at 5 degrees from vertical on 1 load face. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 7024.5, -4052.6, -90057.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 46.59029229320949, 87.93017661842879, 118.40460849416883 ], [ 130.16780228609232, 87.93017661842879, 118.40460849416883 ] ]
[ [ 87.31692923288531, 9.34992295823189, 175.42625140618648 ] ]
2.34
[ 78, 40, 77 ]
[ -2.34, -2.34, -2.34 ]
0.25
0.25
0.0162
medium
54
19.3
target reached
3.3984
20,135.13
5,045.54
5.402
3.113
65.72
114.05
324.71
0.10985
0.12901
0.365
true
true
true
1
1
9.36
32.76
+y
0.3543
{"+z": 0.4586, "-z": 0.4066, "+y": 0.3543, "-y": 0.6985, "+x": 0.4675, "-x": 0.4635}
true
0.000001
0.881202
1.034792
[ 78, -45, -1000 ]
210,000
arrays/00086.npz
{"Wx": 176.8, "Dy": 83.9, "Hz": 171.4, "bolts": 2, "pad_on_top": true, "pad": [11.307697082299603, 18.69984591646378]}
[{"fraction": 1, "compliance": 0.8812021232300924, "dmax": 0.0012198053006143548}, {"fraction": 0.9700010754054768, "compliance": 0.8812116363924095, "dmax": 0.0012198170915830504}, {"fraction": 0.9407500464379638, "compliance": 0.8812297081053735, "dmax": 0.0012198379928674843}, {"fraction": 0.9125255408800728, "compl...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 176.75809457930183, "w": 83.93017661842879, "h": 171.42625140618648}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 21.210971349516218, "y": 83.93...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 176.758094579, 83.930176618, 17...
00087
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 511 x 690 x 767 mm design space, held at 3 support faces, carrying 2.10 kN at 9 degrees from vertical on 2 load faces. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 343.9, -2071.7 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 71.65, 227.85, -12 ], [ 415.15, 227.85, -12 ], [ 243.4, 501.65000000000003, -12 ] ]
[ [ 243.4, 226.75, 303.85 ], [ 243.4, 499.15, 524.15 ] ]
8.52
[ 60, 81, 90 ]
[ -8.52, -8.52, -20.52 ]
0.2
0.2
0.0834
fine
62
49.7
target reached
3.1125
333,963.85
65,640.82
4,558.52
1,525.416
0.06
0.18
0.43
0.00183
0.00386
1.5336
true
true
true
1
1
24.1
34.08
+z
0.329
{"+z": 0.329, "-z": 0.3492, "+y": 0.4432, "-y": 0.465, "+x": 0.4842, "-x": 0.4529}
true
0
0.263884
0.431343
[ 0, 166, -1000 ]
70,000
arrays/00087.npz
{"feet": 3, "rounded": true, "W": 486.8, "D": 670.8, "H": 734.9, "lip": 304.7, "seatFront": 341.4, "seatRear": 266.3, "seatDepth": 383.5, "gapY": 408.9, "gapZ": 313.4, "backTopY": 589.4, "P": 36.7, "tp": 12.0, "footY": 209.5, "footX": 53.3, "rearFootY": 483.3}
[{"fraction": 1, "compliance": 0.26388374467460146, "dmax": 0.0008714548931767305}, {"fraction": 0.9699977907769741, "compliance": 0.2638940796485426, "dmax": 0.0008643346161401107}, {"fraction": 0.9408984813993027, "compliance": 0.26392684103551867, "dmax": 0.0008548996183903556}, {"fraction": 0.9126732559144742, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 486.8}, {"name": "D", "value": 670.8}, {"name": "H", "value": 734.9}, {"name": "lip", "value": 304.7}, {"name": "seatFront", "value": 341.4}, {"name": "seatRear", "value": 266.3}, {"name": "seatDepth", "value": 383.5}, {"name": "gapY", "value": 408.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 486.8, D = 670.8, H = 734.9, lip = 304.7, seatFront = 341.4, seat...
00088
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 312 x 27 x 115 mm design space, held at 1 support face, carrying 15.23 kN at 7 degrees from vertical on 1 load face. Keep 20% of the material, smallest member coarse; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 1904.3, 0, -15113.8 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 11.36284693176525, 54.085218900508 ] ]
[ [ 218.12009683985005, 11.36284693176525, 112.170437801016 ] ]
1.56
[ 200, 17, 74 ]
[ -5.5600000000000005, -1.56, -1.56 ]
0.2
0.2
0.0134
coarse
59
31
target reached
1.682
6,061.27
1,188.84
6.947
2.953
64.78
152.38
215.04
0.22425
0.526
0.624
true
true
true
1
1
3.12
6.24
-x
0.4021
{"+z": 0.5643, "-z": 0.6486, "+y": 0.7095, "-y": 0.716, "+x": 0.458, "-x": 0.4021}
true
0.000066
37.799257
114.578174
[ 252, 0, -2000 ]
210,000
arrays/00088.npz
{"kind": "cantilever", "L": 303.3, "W": 22.7, "H": 108.2, "pad_x": 206.7, "pad_len": 22.9, "foot": 11.9}
[{"fraction": 1, "compliance": 37.79925707368964, "dmax": 0.027277899623440342}, {"fraction": 0.97, "compliance": 37.79932473715478, "dmax": 0.02726140517803967}, {"fraction": 0.9409020742884708, "compliance": 37.79988555112746, "dmax": 0.027153409318532308}, {"fraction": 0.9126772793053546, "compliance": 37.8048615128...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 303.3241514572444, "w": 22.7256938635305, "h": 108.170437801016}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 22.725693...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 303.324151457, 22.725693864, 108.1704...
00089
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 80 x 196 x 153 mm design space, held at 2 support faces, carrying 12.68 kN at 7 degrees from vertical on 1 load face. Keep 10% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -251.6, 1560, -12581 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 14.868442701524334, 191.12227981092906, 46.29697693359516 ], [ 58.79666671620446, 191.12227981092906, 46.29697693359516 ] ]
[ [ 55.08809999981167, 14.047521368304412, 147.6063805489849 ] ]
2.15
[ 37, 91, 71 ]
[ -2.15, -2.15, -2.15 ]
0.1
0.1
0.0029
medium
60
63.7
target reached
9.1001
15,561.8
1,572.46
4.43
1.003
80.13
353.96
674.1
4.12252
4.53665
0.3913
false
false
false
1
1
7.45
8.6
+y
0.1638
{"+z": 0.3232, "-z": 0.3366, "+y": 0.1638, "-y": 0.4499, "+x": 0.4615, "-x": 0.5191}
true
0.000122
247.129556
268.755985
[ -20, 124, -1000 ]
210,000
arrays/00089.npz
{"Wx": 73.7, "Dy": 187.1, "Hz": 143.6, "bolts": 2, "pad_on_top": true, "pad": [20.989135148857315, 28.095042736608825]}
[{"fraction": 1, "compliance": 247.1295563002863, "dmax": 0.3268179572297074}, {"fraction": 0.970001222643355, "compliance": 250.18781517461352, "dmax": 0.33687159228988894}, {"fraction": 0.9409023107959408, "compliance": 247.57748848852916, "dmax": 0.32750595951269856}, {"fraction": 0.9126739210172393, "compliance": 2...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 73.6651094177288, "w": 187.12227981092906, "h": 143.6063805489849}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 8.839813130127455, "y": 187.1222...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 73.665109418, 187.122279811, 14...
00090
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 551 x 729 x 757 mm design space, held at 3 support faces, carrying 2.10 kN at 19 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 681.3, -1986.4 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 123.3, 159.5, -12 ], [ 405.59999999999997, 159.5, -12 ], [ 264.45, 507.2, -12 ] ]
[ [ 264.45, 244.8, 348.75 ], [ 264.45, 540.15, 543.25 ] ]
9.34
[ 59, 78, 81 ]
[ -9.34, -9.34, -21.34 ]
0.25
0.25
0.0787
medium
55
42.2
target reached
3.0105
433,649.95
106,119.96
3,478.335
1,409.889
0.07
0.16
0.48
0.00239
0.00388
1.5131
true
true
true
1
1
37.36
37.36
+y
0.299
{"+z": 0.3304, "-z": 0.3651, "+y": 0.299, "-y": 0.329, "+x": 0.5145, "-x": 0.5222}
true
0.000033
0.486771
0.66074
[ 0, 343, -1000 ]
70,000
arrays/00090.npz
{"feet": 3, "rounded": false, "W": 528.9, "D": 701.4, "H": 716.7, "lip": 368.6, "seatFront": 384.0, "seatRear": 313.5, "seatDepth": 419.6, "gapY": 447.3, "gapZ": 369.8, "backTopY": 633.0, "P": 37.6, "tp": 12.0, "footY": 140.7, "footX": 104.5, "rearFootY": 488.4}
[{"fraction": 1, "compliance": 0.4867709423210339, "dmax": 0.0012036343708188109}, {"fraction": 0.9699979897329286, "compliance": 0.486924071451861, "dmax": 0.0011805335862874278}, {"fraction": 0.9408981481027492, "compliance": 0.48689827181174, "dmax": 0.0011737042793673496}, {"fraction": 0.9126710565669541, "complian...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 528.9}, {"name": "D", "value": 701.4}, {"name": "H", "value": 716.7}, {"name": "lip", "value": 368.6}, {"name": "seatFront", "value": 384.0}, {"name": "seatRear", "value": 313.5}, {"name": "seatDepth", "value": 419.6}, {"name": "gapY", "value": 447.3...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 528.9, D = 701.4, H = 716.7, lip = 368.6, seatFront = 384, seatRe...
00091
ok
null
beam
A steel S355 beam (machined or welded), within a 178 x 34 x 85 mm design space, held at 1 support face, carrying 15.97 kN straight down on 1 load face. Keep 30% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -1336.9, 0, -15915.9 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 15.400467734768066, 39.187386886877285 ] ]
[ [ 141.22062619677308, 15.400467734768066, 82.37477377375457 ] ]
1.29
[ 138, 26, 66 ]
[ -5.29, -1.29, -1.29 ]
0.3
0.3
0.0277
fine
49
22.4
target reached
1.41
3,357.94
1,005.89
6.059
3.493
58.59
101.62
179.34
0.09538
0.23057
0.356
true
true
true
1
1
2.58
5.16
-x
0.3525
{"+z": 0.4751, "-z": 0.5583, "+y": 0.7418, "-y": 0.6694, "+x": 0.4356, "-x": 0.3525}
true
0.000018
17.968413
42.542166
[ -168, 0, -2000 ]
210,000
arrays/00091.npz
{"kind": "cantilever", "L": 170.8, "W": 30.8, "H": 78.4, "pad_x": 117.7, "pad_len": 47.0, "foot": 8.9}
[{"fraction": 1, "compliance": 17.968413204570812, "dmax": 0.011984811224372042}, {"fraction": 0.9700001982474922, "compliance": 17.970030198720995, "dmax": 0.011852368152300662}, {"fraction": 0.9409024225843543, "compliance": 17.984501546601937, "dmax": 0.011748880449234144}, {"fraction": 0.912676935886761, "complianc...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 170.77731165174526, "w": 30.80093546953613, "h": 78.37477377375457}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 30.800...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 170.777311652, 30.80093547, 78.374773...
00092
ok
null
bracket
A steel S355 wall bracket (machined or welded), within a 67 x 134 x 117 mm design space, held at 2 support faces, carrying 7.90 kN at 10 degrees from vertical on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ -1336.7, 396.4, -7771.7 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 16.912610839594464, 125.7705619972533, 26.040071200406846 ], [ 45.91792706161982, 125.7705619972533, 26.040071200406846 ] ]
[ [ 27.006350699605868, -4, 62.21313119664789 ] ]
1.63
[ 41, 82, 72 ]
[ -1.63, -5.63, -1.63 ]
0.15
0.15
0.0075
medium
69
33.6
target reached
4.7805
6,803.07
1,027.4
5.158
2.651
68.82
133.89
172.59
0.25877
0.3395
0.2673
true
false
false
1
1
3.26
6.52
+y
0.2271
{"+z": 0.4908, "-z": 0.2659, "+y": 0.2271, "-y": 0.418, "+x": 0.5576, "-x": 0.5439}
true
0.000022
28.00708
38.793879
[ -172, 51, -1000 ]
210,000
arrays/00092.npz
{"Wx": 62.8, "Dy": 121.8, "Hz": 112.5, "bolts": 2, "pad_on_top": false, "pad": [24.850533475065692, 32.364122697214235]}
[{"fraction": 1, "compliance": 28.007080092845808, "dmax": 0.03329267861359033}, {"fraction": 0.9699984447598126, "compliance": 28.013465100763387, "dmax": 0.0326472251380425}, {"fraction": 0.9409008728785552, "compliance": 28.039338244929755, "dmax": 0.03340824991551021}, {"fraction": 0.9126732634771283, "compliance":...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 62.830537901214285, "w": 121.7705619972533, "h": 112.50739047616497}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 7.539664548145714, "y": 121.77...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 62.830537901, 121.770561997, 11...
00093
ok
null
chair
A aluminium 6061-T6 lounge chair (machined or cast), within a 565 x 832 x 842 mm design space, held at 4 support faces, carrying 2.10 kN at 21 degrees from vertical on 2 load faces. Keep 25% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
aluminium 6061-T6
machined or cast
69,000
0.33
2.7
276
[ 0, 768.1, -1954.5 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 122.2, 163.9, -12 ], [ 422.2, 163.9, -12 ], [ 122.2, 613.3, -12 ], [ 422.2, 613.3, -12 ] ]
[ [ 272.2, 270.65, 337.6 ], [ 272.2, 639.25, 573.55 ] ]
9.91
[ 57, 84, 85 ]
[ -9.91, -9.91, -21.91 ]
0.25
0.25
0.0901
fine
55
47.1
target reached
2.1843
525,446.73
127,673.9
6,427.461
2,640.53
0.04
0.1
0.22
0.00142
0.00313
1.6847
true
true
true
1
1
28.03
39.64
+y
0.2928
{"+z": 0.2997, "-z": 0.3258, "+y": 0.2928, "-y": 0.3517, "+x": 0.6108, "-x": 0.6169}
true
0.000024
0.259408
0.488754
[ 0, 393, -1000 ]
70,000
arrays/00093.npz
{"feet": 4, "rounded": false, "W": 544.4, "D": 812.0, "H": 803.4, "lip": 359.9, "seatFront": 387.3, "seatRear": 287.9, "seatDepth": 471.3, "gapY": 499.5, "gapZ": 343.7, "backTopY": 779.0, "P": 39.6, "tp": 12.0, "footY": 144.1, "footX": 102.4, "rearFootY": 593.5}
[{"fraction": 1, "compliance": 0.25940812980699723, "dmax": 0.0007163722099990731}, {"fraction": 0.970002355065353, "compliance": 0.25945862412831483, "dmax": 0.0007163369790191579}, {"fraction": 0.9409025787965616, "compliance": 0.25954953635108285, "dmax": 0.000716068320212757}, {"fraction": 0.9126761392628645, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 544.4}, {"name": "D", "value": 812.0}, {"name": "H", "value": 803.4}, {"name": "lip", "value": 359.9}, {"name": "seatFront", "value": 387.3}, {"name": "seatRear", "value": 287.9}, {"name": "seatDepth", "value": 471.3}, {"name": "gapY", "value": 499.5...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 544.4, D = 812, H = 803.4, lip = 359.9, seatFront = 387.3, seatRe...
00094
ok
null
beam
A stainless 316L beam (3D printed (metal powder bed)), within a 351 x 38 x 56 mm design space, held at 2 support faces, carrying 39.24 kN at 7 degrees from vertical on 1 load face. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ -4444.6, 0, -38987.7 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 9.203354062881957, 17.624130658331524, -4 ], [ 338.2323591152522, 17.624130658331524, -4 ] ]
[ [ 237.2493153200062, 17.624130658331524, 49.42493329695392 ] ]
1.41
[ 249, 27, 40 ]
[ -1.41, -1.41, -5.41 ]
0.3
0.3
0.0134
medium
49
28.1
target reached
1.7165
4,514.38
1,365.04
3.812
2.114
118.04
212.84
296.52
0.19858
0.38744
0.7022
true
true
true
1
1
2.82
11.28
+x
0.1002
{"+z": 0.6451, "-z": 0.6618, "+y": 0.7999, "-y": 0.8014, "+x": 0.1002, "-x": 0.1052}
true
0
17.383254
33.491917
[ -228, 0, -2000 ]
210,000
arrays/00094.npz
{"kind": "two feet", "L": 347.4, "W": 35.2, "H": 45.4, "pad_x": 224.2, "pad_len": 26.0, "foot": 18.4}
[{"fraction": 1, "compliance": 17.383253710298725, "dmax": 0.00936197974509298}, {"fraction": 0.970002420721375, "compliance": 17.415700038075272, "dmax": 0.009380817273782758}, {"fraction": 0.9409005083514888, "compliance": 17.513619159596214, "dmax": 0.009440013681366101}, {"fraction": 0.9126748971193416, "compliance...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 347.4357131781342, "w": 35.24826131666305, "h": 45.42493329695392}}, {"id": "s0", "type": "box", "name": "Foot 1", "params": {"x": 0.0, "y": 0, "z": -4.0, "l": 18.4067081257...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 347.435713178, 35.248261317, 45.42493...
00095
failed
ValueError: the carve cut the load off from the supports (the member between them was removed)
bracket
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
{"Wx": 124.4, "Dy": 107.8, "Hz": 104.0, "bolts": 2, "pad_on_top": false, "pad": [35.622819459137936, 29.38809629188784]}
null
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 124.43003402183903, "w": 107.84555600718299, "h": 104.01420984703456}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 14.931604082620684, "y": 107....
null
00096
ok
null
chair
A titanium Ti-6Al-4V lounge chair (3D printed (metal powder bed)), within a 618 x 948 x 731 mm design space, held at 3 support faces, carrying 2.10 kN at 7 degrees from vertical on 2 load faces. Keep 30% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/5...
titanium Ti-6Al-4V
3D printed (metal powder bed)
114,000
0.34
4.43
880
[ 0, 248.1, -2085.3 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 70.55, 224.95, -12 ], [ 521.1500000000001, 224.95, -12 ], [ 295.85, 614.75, -12 ] ]
[ [ 295.85, 263.2, 353.15 ], [ 295.85, 682.3, 508.45000000000005 ] ]
10.3
[ 60, 92, 71 ]
[ -10.3, -10.3, -22.3 ]
0.3
0.3
0.0849
medium
48
38.1
target reached
2.733
979,430.26
294,519.89
21,410.808
9,715.582
0.04
0.09
0.31
0.00088
0.00127
1.8952
true
true
true
1
1
29.13
41.2
+y
0.1738
{"+z": 0.2435, "-z": 0.2658, "+y": 0.1738, "-y": 0.2468, "+x": 0.459, "-x": 0.4402}
true
0.000018
0.233044
0.283563
[ 0, 119, -1000 ]
70,000
arrays/00096.npz
{"feet": 3, "rounded": true, "W": 591.7, "D": 918.3, "H": 698.6, "lip": 397.5, "seatFront": 438.6, "seatRear": 267.7, "seatDepth": 456.4, "gapY": 477.9, "gapZ": 318.3, "backTopY": 886.7, "P": 39.5, "tp": 12.0, "footY": 205.2, "footX": 50.8, "rearFootY": 595.0}
[{"fraction": 1, "compliance": 0.2330439735232143, "dmax": 0.0006893460574799483}, {"fraction": 0.9699985232680555, "compliance": 0.2330609781438717, "dmax": 0.0006894244307910438}, {"fraction": 0.9408973766571552, "compliance": 0.23309050623145025, "dmax": 0.0006894942592199409}, {"fraction": 0.9126727419101289, "comp...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 591.7}, {"name": "D", "value": 918.3}, {"name": "H", "value": 698.6}, {"name": "lip", "value": 397.5}, {"name": "seatFront", "value": 438.6}, {"name": "seatRear", "value": 267.7}, {"name": "seatDepth", "value": 456.4}, {"name": "gapY", "value": 477.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 591.7, D = 918.3, H = 698.6, lip = 397.5, seatFront = 438.6, seat...
00097
ok
null
beam
A steel S355 beam (machined or welded), within a 283 x 60 x 60 mm design space, held at 1 support face, carrying 4.03 kN straight down on 1 load face. Keep 15% of the material, smallest member medium; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of its span.
steel S355
machined or welded
210,000
0.3
7.85
355
[ 175.2, 0, -4027.4 ]
scaled so the design space has a safety factor of 3 to 15
[ [ -4, 28.1480821426378, 26.016304045737265 ] ]
[ [ 216.40593248336947, 28.1480821426378, 56.03260809147453 ] ]
1.61
[ 176, 37, 37 ]
[ -5.61, -1.61, -1.61 ]
0.15
0.15
0.0296
medium
69
42.6
target reached
1.7839
6,502.14
937.12
12.333
3.919
28.78
90.58
155.42
0.14957
0.54996
0.5667
true
true
true
1
1
3.22
6.44
-x
0.4352
{"+z": 0.7097, "-z": 0.698, "+y": 0.6533, "-y": 0.6224, "+x": 0.5687, "-x": 0.4352}
true
0.000063
107.349376
417.520761
[ 87, 0, -2000 ]
210,000
arrays/00097.npz
{"kind": "cantilever", "L": 274.6, "W": 56.3, "H": 52.0, "pad_x": 188.8, "pad_len": 55.3, "foot": 9.0}
[{"fraction": 1, "compliance": 107.34937553939407, "dmax": 0.07429139994214756}, {"fraction": 0.9699997527995452, "compliance": 107.34809639459759, "dmax": 0.07428102990288746}, {"fraction": 0.94089931525474, "compliance": 107.34855808801512, "dmax": 0.07425137671081897}, {"fraction": 0.9126739673200999, "compliance": ...
{"name": "Carve dataset: beam", "variables": [], "features": [{"id": "env", "type": "box", "name": "Beam", "params": {"x": 0, "y": 0, "z": 0, "l": 274.55005153115985, "w": 56.2961642852756, "h": 52.03260809147453}}, {"id": "s1", "type": "box", "name": "Wall", "params": {"x": -4.0, "y": 0, "z": 0, "l": 4.0, "w": 56.2961...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Beam beam = sm.create_box((0.0, 0.0, 0.0), 274.550051531, 56.296164285, 52.03260...
00098
ok
null
bracket
A stainless 316L wall bracket (3D printed (metal powder bed)), within a 138 x 131 x 198 mm design space, held at 2 support faces, carrying 14.10 kN at 13 degrees from vertical on 1 load face. Keep 20% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/500 of...
stainless 316L
3D printed (metal powder bed)
193,000
0.3
8
450
[ 1756.3, -2730.5, -13721 ]
scaled so the design space has a safety factor of 3 to 15
[ [ 28.83986288578563, 123.93790584287157, 148.2687028124716 ], [ 103.73107488621278, 123.93790584287157, 148.2687028124716 ] ]
[ [ 78.25869883427818, 6.574064688163364, 191.97548631816537 ] ]
2.47
[ 56, 53, 80 ]
[ -2.47, -2.47, -2.47 ]
0.2
0.2
0.0059
fine
57
35.4
target reached
4.672
23,974.64
4,734.63
13.376
6.077
33.64
74.05
106.01
0.22274
0.17182
0.3952
true
true
true
1
1
9.88
14.82
+y
0.2329
{"+z": 0.4116, "-z": 0.5815, "+y": 0.2329, "-y": 0.3248, "+x": 0.4482, "-x": 0.4551}
true
0.000071
9.968453
10.804129
[ 128, -199, -1000 ]
210,000
arrays/00098.npz
{"Wx": 132.6, "Dy": 119.9, "Hz": 188.0, "bolts": 2, "pad_on_top": true, "pad": [45.85766019191106, 13.148129376326729]}
[{"fraction": 1, "compliance": 9.96845298985785, "dmax": 0.014933785336741997}, {"fraction": 0.970000685139328, "compliance": 9.974186327627534, "dmax": 0.014950669602833918}, {"fraction": 0.9409018391097104, "compliance": 9.980120596930451, "dmax": 0.014970401707818212}, {"fraction": 0.912674098797091, "compliance": 9...
{"name": "Carve dataset: bracket", "variables": [], "features": [{"id": "env", "type": "box", "name": "Bracket", "params": {"x": 0, "y": 0, "z": 0, "l": 132.57093777199842, "w": 119.93790584287157, "h": 187.97548631816537}}, {"id": "b0", "type": "box", "name": "Bolt pad 1", "params": {"x": 15.90851253263981, "y": 119.9...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Bracket bracket = sm.create_box((0.0, 0.0, 0.0), 132.570937772, 119.937905843, 1...
00099
ok
null
chair
A aluminium AlSi10Mg lounge chair (3D printed (metal powder bed)), within a 411 x 839 x 795 mm design space, held at 3 support faces, carrying 2.10 kN at 23 degrees from vertical on 2 load faces. Keep 10% of the material, smallest member fine; it should hold with a safety factor of at least 1.5 and deflect at most 1/50...
aluminium AlSi10Mg
3D printed (metal powder bed)
70,000
0.33
2.67
230
[ 0, 829.6, -1929.2 ]
seated person, 2.1 kN total (furniture static seat and back loads)
[ [ 101.64999999999999, 252.65, -12 ], [ 291.05, 252.65, -12 ], [ 196.35, 669.8499999999999, -12 ] ]
[ [ 196.35, 231.6, 375.35 ], [ 196.35, 604.7, 560.35 ] ]
8.93
[ 46, 94, 89 ]
[ -8.93, -8.93, -20.93 ]
0.1
0.1
0.0671
fine
98
101.8
target reached
1.9144
380,110.56
36,077.28
3,758.508
463.756
0.06
0.5
0.92
0.00184
0.01462
1.6788
true
true
true
1
1
17.86
35.72
+y
0.2558
{"+z": 0.3748, "-z": 0.3745, "+y": 0.2558, "-y": 0.278, "+x": 0.674, "-x": 0.6436}
true
0.000015
0.399445
2.198357
[ 0, 430, -1000 ]
70,000
arrays/00099.npz
{"feet": 3, "rounded": true, "W": 392.7, "D": 814.2, "H": 763.2, "lip": 365.7, "seatFront": 404.4, "seatRear": 346.3, "seatDepth": 393.2, "gapY": 426.4, "gapZ": 357.5, "backTopY": 783.0, "P": 39.1, "tp": 12.0, "footY": 233.1, "footX": 82.1, "rearFootY": 650.3}
[{"fraction": 1, "compliance": 0.39944498107376086, "dmax": 0.0009557121128591096}, {"fraction": 0.9699987941637526, "compliance": 0.39946212220296673, "dmax": 0.0009463251975819915}, {"fraction": 0.9408995538405884, "compliance": 0.39953114628100395, "dmax": 0.000946620385408299}, {"fraction": 0.9126733389605691, "com...
{"name": "Carve dataset: chair", "variables": [{"name": "W", "value": 392.7}, {"name": "D", "value": 814.2}, {"name": "H", "value": 763.2}, {"name": "lip", "value": 365.7}, {"name": "seatFront", "value": 404.4}, {"name": "seatRear", "value": 346.3}, {"name": "seatDepth", "value": 393.2}, {"name": "gapY", "value": 426.4...
# Generated by ScriptCAD from the feature history. # `sm` is usd_brep (NVIDIA USD BRep / SMLib). show(), edges_at(), faces_at(), # polyline(), to_plane(), linear_pattern() and polar_pattern() are ScriptCAD helpers. import usd_brep as sm # Variables: W = 392.7, D = 814.2, H = 763.2, lip = 365.7, seatFront = 404.4, seat...